diff --git a/.clang-format b/.clang-format
index 0d1ed87767337..0bbb1991defea 100644
--- a/.clang-format
+++ b/.clang-format
@@ -254,6 +254,7 @@ ForEachMacros:
   - 'for_each_free_mem_range'
   - 'for_each_free_mem_range_reverse'
   - 'for_each_func_rsrc'
+  - 'for_each_group_device'
   - 'for_each_group_evsel'
   - 'for_each_group_member'
   - 'for_each_hstate'
diff --git a/.gitattributes b/.gitattributes
index c9ba5bfc40360..2325c529e1854 100644
--- a/.gitattributes
+++ b/.gitattributes
@@ -2,3 +2,4 @@
 *.[ch] diff=cpp
 *.dts diff=dts
 *.dts[io] diff=dts
+*.rs diff=rust
diff --git a/.gitignore b/.gitignore
index 7f86e08379094..9fd4c9533b3dc 100644
--- a/.gitignore
+++ b/.gitignore
@@ -16,7 +16,6 @@
 *.bin
 *.bz2
 *.c.[012]*.*
-*.cover
 *.dt.yaml
 *.dtb
 *.dtbo
@@ -34,7 +33,6 @@
 *.lz4
 *.lzma
 *.lzo
-*.mbx
 *.mod
 *.mod.c
 *.o
@@ -51,7 +49,6 @@
 *.symversions
 *.tab.[ch]
 *.tar
-*.usyms
 *.xz
 *.zst
 Module.symvers
@@ -112,7 +109,6 @@ modules.order
 #
 /include/config/
 /include/generated/
-/include/ksym/
 /arch/*/include/generated/
 
 # stgit generated dirs
diff --git a/.mailmap b/.mailmap
index c94da2a63d0fa..e50662536c486 100644
--- a/.mailmap
+++ b/.mailmap
@@ -5,14 +5,17 @@
 # same person appearing not to be so or badly displayed. Also allows for
 # old email addresses to map to new email addresses.
 #
-# For format details, see "MAPPING AUTHORS" in "man git-shortlog".
+# For format details, see "man gitmailmap" or "MAPPING AUTHORS" in
+# "man git-shortlog" on older systems.
 #
 # Please keep this list dictionary sorted.
 #
 Aaron Durbin <adurbin@google.com>
 Abel Vesa <abelvesa@kernel.org> <abel.vesa@nxp.com>
 Abel Vesa <abelvesa@kernel.org> <abelvesa@gmail.com>
+Abhijeet Dharmapurikar <quic_adharmap@quicinc.com> <adharmap@codeaurora.org>
 Abhinav Kumar <quic_abhinavk@quicinc.com> <abhinavk@codeaurora.org>
+Ahmad Masri <quic_amasri@quicinc.com> <amasri@codeaurora.org>
 Adam Oldham <oldhamca@gmail.com>
 Adam Radford <aradford@gmail.com>
 Adriana Reus <adi.reus@gmail.com> <adriana.reus@intel.com>
@@ -29,6 +32,7 @@ Alexander Mikhalitsyn <alexander@mihalicyn.com> <alexander.mikhalitsyn@virtuozzo
 Alexander Mikhalitsyn <alexander@mihalicyn.com> <aleksandr.mikhalitsyn@canonical.com>
 Alexandre Belloni <alexandre.belloni@bootlin.com> <alexandre.belloni@free-electrons.com>
 Alexandre Ghiti <alex@ghiti.fr> <alexandre.ghiti@canonical.com>
+Alexei Avshalom Lazar <quic_ailizaro@quicinc.com> <ailizaro@codeaurora.org>
 Alexei Starovoitov <ast@kernel.org> <alexei.starovoitov@gmail.com>
 Alexei Starovoitov <ast@kernel.org> <ast@fb.com>
 Alexei Starovoitov <ast@kernel.org> <ast@plumgrid.com>
@@ -36,8 +40,11 @@ Alex Hung <alexhung@gmail.com> <alex.hung@canonical.com>
 Alex Shi <alexs@kernel.org> <alex.shi@intel.com>
 Alex Shi <alexs@kernel.org> <alex.shi@linaro.org>
 Alex Shi <alexs@kernel.org> <alex.shi@linux.alibaba.com>
+Aloka Dixit <quic_alokad@quicinc.com> <alokad@codeaurora.org>
 Al Viro <viro@ftp.linux.org.uk>
 Al Viro <viro@zenIV.linux.org.uk>
+Amit Blay <quic_ablay@quicinc.com> <ablay@codeaurora.org>
+Amit Nischal <quic_anischal@quicinc.com> <anischal@codeaurora.org>
 Andi Kleen <ak@linux.intel.com> <ak@suse.de>
 Andi Shyti <andi@etezian.org> <andi.shyti@samsung.com>
 Andreas Herrmann <aherrman@de.ibm.com>
@@ -53,6 +60,8 @@ Andrey Ryabinin <ryabinin.a.a@gmail.com> <aryabinin@virtuozzo.com>
 Andrzej Hajda <andrzej.hajda@intel.com> <a.hajda@samsung.com>
 André Almeida <andrealmeid@igalia.com> <andrealmeid@collabora.com>
 Andy Adamson <andros@citi.umich.edu>
+Anilkumar Kolli <quic_akolli@quicinc.com> <akolli@codeaurora.org>
+Anirudh Ghayal <quic_aghayal@quicinc.com> <aghayal@codeaurora.org>
 Antoine Tenart <atenart@kernel.org> <antoine.tenart@bootlin.com>
 Antoine Tenart <atenart@kernel.org> <antoine.tenart@free-electrons.com>
 Antonio Ospite <ao2@ao2.it> <ao2@amarulasolutions.com>
@@ -61,9 +70,17 @@ Archit Taneja <archit@ti.com>
 Ard Biesheuvel <ardb@kernel.org> <ard.biesheuvel@linaro.org>
 Arnaud Patard <arnaud.patard@rtp-net.org>
 Arnd Bergmann <arnd@arndb.de>
+Arun Kumar Neelakantam <quic_aneela@quicinc.com> <aneela@codeaurora.org>
+Ashok Raj Nagarajan <quic_arnagara@quicinc.com> <arnagara@codeaurora.org>
+Ashwin Chaugule <quic_ashwinc@quicinc.com> <ashwinc@codeaurora.org>
+Asutosh Das <quic_asutoshd@quicinc.com> <asutoshd@codeaurora.org>
 Atish Patra <atishp@atishpatra.org> <atish.patra@wdc.com>
+Avaneesh Kumar Dwivedi <quic_akdwived@quicinc.com> <akdwived@codeaurora.org>
 Axel Dyks <xl@xlsigned.net>
 Axel Lin <axel.lin@gmail.com>
+Balakrishna Godavarthi <quic_bgodavar@quicinc.com> <bgodavar@codeaurora.org>
+Banajit Goswami <quic_bgoswami@quicinc.com> <bgoswami@codeaurora.org>
+Baochen Qiang <quic_bqiang@quicinc.com> <bqiang@codeaurora.org>
 Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@linaro.org>
 Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@spreadtrum.com>
 Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@unisoc.com>
@@ -92,12 +109,15 @@ Brian Avery <b.avery@hp.com>
 Brian King <brking@us.ibm.com>
 Brian Silverman <bsilver16384@gmail.com> <brian.silverman@bluerivertech.com>
 Cai Huoqing <cai.huoqing@linux.dev> <caihuoqing@baidu.com>
+Can Guo <quic_cang@quicinc.com> <cang@codeaurora.org>
+Carl Huang <quic_cjhuang@quicinc.com> <cjhuang@codeaurora.org>
 Changbin Du <changbin.du@intel.com> <changbin.du@gmail.com>
 Changbin Du <changbin.du@intel.com> <changbin.du@intel.com>
 Chao Yu <chao@kernel.org> <chao2.yu@samsung.com>
 Chao Yu <chao@kernel.org> <yuchao0@huawei.com>
 Chris Chiu <chris.chiu@canonical.com> <chiu@endlessm.com>
 Chris Chiu <chris.chiu@canonical.com> <chiu@endlessos.org>
+Chris Lew <quic_clew@quicinc.com> <clew@codeaurora.org>
 Christian Borntraeger <borntraeger@linux.ibm.com> <borntraeger@de.ibm.com>
 Christian Borntraeger <borntraeger@linux.ibm.com> <cborntra@de.ibm.com>
 Christian Borntraeger <borntraeger@linux.ibm.com> <borntrae@de.ibm.com>
@@ -118,7 +138,10 @@ Daniel Borkmann <daniel@iogearbox.net> <dborkmann@redhat.com>
 Daniel Borkmann <daniel@iogearbox.net> <dborkman@redhat.com>
 Daniel Borkmann <daniel@iogearbox.net> <dxchgb@gmail.com>
 David Brownell <david-b@pacbell.net>
+David Collins <quic_collinsd@quicinc.com> <collinsd@codeaurora.org>
 David Woodhouse <dwmw2@shinybook.infradead.org>
+Dedy Lansky <quic_dlansky@quicinc.com> <dlansky@codeaurora.org>
+Deepak Kumar Singh <quic_deesin@quicinc.com> <deesin@codeaurora.org>
 Dengcheng Zhu <dzhu@wavecomp.com> <dczhu@mips.com>
 Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@gmail.com>
 Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@imgtec.com>
@@ -135,6 +158,7 @@ Dmitry Safonov <0x7f454c46@gmail.com> <dsafonov@virtuozzo.com>
 Domen Puncer <domen@coderock.org>
 Douglas Gilbert <dougg@torque.net>
 Ed L. Cashin <ecashin@coraid.com>
+Elliot Berman <quic_eberman@quicinc.com> <eberman@codeaurora.org>
 Enric Balletbo i Serra <eballetbo@kernel.org> <enric.balletbo@collabora.com>
 Enric Balletbo i Serra <eballetbo@kernel.org> <eballetbo@iseebcn.com>
 Erik Kaneda <erik.kaneda@intel.com> <erik.schmauss@intel.com>
@@ -147,6 +171,7 @@ Faith Ekstrand <faith.ekstrand@collabora.com> <jason.ekstrand@collabora.com>
 Felipe W Damasio <felipewd@terra.com.br>
 Felix Kuhling <fxkuehl@gmx.de>
 Felix Moeller <felix@derklecks.de>
+Fenglin Wu <quic_fenglinw@quicinc.com> <fenglinw@codeaurora.org>
 Filipe Lautert <filipe@icewall.org>
 Finn Thain <fthain@linux-m68k.org> <fthain@telegraphics.com.au>
 Franck Bui-Huu <vagabon.xyz@gmail.com>
@@ -170,20 +195,29 @@ Greg Kurz <groug@kaod.org> <gkurz@linux.vnet.ibm.com>
 Gregory CLEMENT <gregory.clement@bootlin.com> <gregory.clement@free-electrons.com>
 Guilherme G. Piccoli <kernel@gpiccoli.net> <gpiccoli@linux.vnet.ibm.com>
 Guilherme G. Piccoli <kernel@gpiccoli.net> <gpiccoli@canonical.com>
+Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> <gokulsri@codeaurora.org>
+Govindaraj Saminathan <quic_gsamin@quicinc.com> <gsamin@codeaurora.org>
 Guo Ren <guoren@kernel.org> <guoren@linux.alibaba.com>
 Guo Ren <guoren@kernel.org> <ren_guo@c-sky.com>
+Guru Das Srinagesh <quic_gurus@quicinc.com> <gurus@codeaurora.org>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>
 Gustavo Padovan <padovan@profusion.mobi>
 Hanjun Guo <guohanjun@huawei.com> <hanjun.guo@linaro.org>
 Heiko Carstens <hca@linux.ibm.com> <h.carstens@de.ibm.com>
 Heiko Carstens <hca@linux.ibm.com> <heiko.carstens@de.ibm.com>
+Heiko Stuebner <heiko@sntech.de> <heiko.stuebner@bqreaders.com>
+Heiko Stuebner <heiko@sntech.de> <heiko.stuebner@theobroma-systems.com>
+Heiko Stuebner <heiko@sntech.de> <heiko.stuebner@vrull.eu>
 Henk Vergonet <Henk.Vergonet@gmail.com>
 Henrik Kretzschmar <henne@nachtwindheim.de>
 Henrik Rydberg <rydberg@bitmath.org>
 Herbert Xu <herbert@gondor.apana.org.au>
 Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com>
 Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn>
+J. Bruce Fields <bfields@fieldses.org> <bfields@redhat.com>
+J. Bruce Fields <bfields@fieldses.org> <bfields@citi.umich.edu>
 Jacob Shin <Jacob.Shin@amd.com>
+Jack Pham <quic_jackp@quicinc.com> <jackp@codeaurora.org>
 Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk@google.com>
 Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk.kim@samsung.com>
 Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk@motorola.com>
@@ -211,10 +245,12 @@ Jayachandran C <c.jayachandran@gmail.com> <jchandra@digeo.com>
 Jayachandran C <c.jayachandran@gmail.com> <jnair@caviumnetworks.com>
 <jean-philippe@linaro.org> <jean-philippe.brucker@arm.com>
 Jean Tourrilhes <jt@hpl.hp.com>
+Jeevan Shriram <quic_jshriram@quicinc.com> <jshriram@codeaurora.org>
 Jeff Garzik <jgarzik@pretzel.yyz.us>
 Jeff Layton <jlayton@kernel.org> <jlayton@poochiereds.net>
 Jeff Layton <jlayton@kernel.org> <jlayton@primarydata.com>
 Jeff Layton <jlayton@kernel.org> <jlayton@redhat.com>
+Jeffrey Hugo <quic_jhugo@quicinc.com> <jhugo@codeaurora.org>
 Jens Axboe <axboe@kernel.dk> <axboe@suse.de>
 Jens Axboe <axboe@kernel.dk> <jens.axboe@oracle.com>
 Jens Axboe <axboe@kernel.dk> <axboe@fb.com>
@@ -222,6 +258,7 @@ Jens Axboe <axboe@kernel.dk> <axboe@meta.com>
 Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
 Jernej Skrabec <jernej.skrabec@gmail.com> <jernej.skrabec@siol.net>
 Jessica Zhang <quic_jesszhan@quicinc.com> <jesszhan@codeaurora.org>
+Jilai Wang <quic_jilaiw@quicinc.com> <jilaiw@codeaurora.org>
 Jiri Pirko <jiri@resnulli.us> <jiri@nvidia.com>
 Jiri Pirko <jiri@resnulli.us> <jiri@mellanox.com>
 Jiri Pirko <jiri@resnulli.us> <jpirko@redhat.com>
@@ -232,14 +269,17 @@ Jiri Slaby <jirislaby@kernel.org> <jslaby@suse.cz>
 Jiri Slaby <jirislaby@kernel.org> <xslaby@fi.muni.cz>
 Jisheng Zhang <jszhang@kernel.org> <jszhang@marvell.com>
 Jisheng Zhang <jszhang@kernel.org> <Jisheng.Zhang@synaptics.com>
+Jishnu Prakash <quic_jprakash@quicinc.com> <jprakash@codeaurora.org>
 Johan Hovold <johan@kernel.org> <jhovold@gmail.com>
 Johan Hovold <johan@kernel.org> <johan@hovoldconsulting.com>
 John Crispin <john@phrozen.org> <blogic@openwrt.org>
+John Fastabend <john.fastabend@gmail.com> <john.r.fastabend@intel.com>
 John Keeping <john@keeping.me.uk> <john@metanate.com>
 John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
 John Stultz <johnstul@us.ibm.com>
 <jon.toppins+linux@gmail.com> <jtoppins@cumulusnetworks.com>
 <jon.toppins+linux@gmail.com> <jtoppins@redhat.com>
+Jonas Gorski <jonas.gorski@gmail.com> <jogo@openwrt.org>
 Jordan Crouse <jordan@cosmicpenguin.net> <jcrouse@codeaurora.org>
 <josh@joshtriplett.org> <josh@freedesktop.org>
 <josh@joshtriplett.org> <josh@kernel.org>
@@ -248,6 +288,7 @@ Jordan Crouse <jordan@cosmicpenguin.net> <jcrouse@codeaurora.org>
 <josh@joshtriplett.org> <josht@vnet.ibm.com>
 Josh Poimboeuf <jpoimboe@kernel.org> <jpoimboe@redhat.com>
 Josh Poimboeuf <jpoimboe@kernel.org> <jpoimboe@us.ibm.com>
+Jouni Malinen <quic_jouni@quicinc.com> <jouni@codeaurora.org>
 Juha Yrjola <at solidboot.com>
 Juha Yrjola <juha.yrjola@nokia.com>
 Juha Yrjola <juha.yrjola@solidboot.com>
@@ -255,6 +296,8 @@ Julien Thierry <julien.thierry.kdev@gmail.com> <julien.thierry@arm.com>
 Iskren Chernev <me@iskren.info> <iskren.chernev@gmail.com>
 Kalle Valo <kvalo@kernel.org> <kvalo@codeaurora.org>
 Kalyan Thota <quic_kalyant@quicinc.com> <kalyan_t@codeaurora.org>
+Karthikeyan Periyasamy <quic_periyasa@quicinc.com> <periyasa@codeaurora.org>
+Kathiravan T <quic_kathirav@quicinc.com> <kathirav@codeaurora.org>
 Kay Sievers <kay.sievers@vrfy.org>
 Kees Cook <keescook@chromium.org> <kees.cook@canonical.com>
 Kees Cook <keescook@chromium.org> <keescook@google.com>
@@ -263,6 +306,8 @@ Kees Cook <keescook@chromium.org> <kees@ubuntu.com>
 Keith Busch <kbusch@kernel.org> <keith.busch@intel.com>
 Keith Busch <kbusch@kernel.org> <keith.busch@linux.intel.com>
 Kenneth W Chen <kenneth.w.chen@intel.com>
+Kenneth Westfield <quic_kwestfie@quicinc.com> <kwestfie@codeaurora.org>
+Kiran Gunda <quic_kgunda@quicinc.com> <kgunda@codeaurora.org>
 Kirill Tkhai <tkhai@ya.ru> <ktkhai@virtuozzo.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <khlebnikov@yandex-team.ru>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
@@ -271,8 +316,13 @@ Krishna Manikandan <quic_mkrishn@quicinc.com> <mkrishn@codeaurora.org>
 Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
 Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski@samsung.com>
 Krzysztof Kozlowski <krzk@kernel.org> <krzysztof.kozlowski@canonical.com>
+Kshitiz Godara <quic_kgodara@quicinc.com> <kgodara@codeaurora.org>
 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Kuogee Hsieh <quic_khsieh@quicinc.com> <khsieh@codeaurora.org>
+Lee Jones <lee@kernel.org> <joneslee@google.com>
+Lee Jones <lee@kernel.org> <lee.jones@canonical.com>
+Lee Jones <lee@kernel.org> <lee.jones@linaro.org>
+Lee Jones <lee@kernel.org> <lee@ubuntu.com>
 Leonard Crestez <leonard.crestez@nxp.com> Leonard Crestez <cdleonard@gmail.com>
 Leonardo Bras <leobras.c@gmail.com> <leonardo@linux.ibm.com>
 Leonard Göhrs <l.goehrs@pengutronix.de>
@@ -280,25 +330,34 @@ Leonid I Ananiev <leonid.i.ananiev@intel.com>
 Leon Romanovsky <leon@kernel.org> <leon@leon.nu>
 Leon Romanovsky <leon@kernel.org> <leonro@mellanox.com>
 Leon Romanovsky <leon@kernel.org> <leonro@nvidia.com>
+Liam Mark <quic_lmark@quicinc.com> <lmark@codeaurora.org>
 Linas Vepstas <linas@austin.ibm.com>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
 <linux-hardening@vger.kernel.org> <kernel-hardening@lists.openwall.com>
 Li Yang <leoyang.li@nxp.com> <leoli@freescale.com>
 Li Yang <leoyang.li@nxp.com> <leo@zh-kernel.org>
+Lior David <quic_liord@quicinc.com> <liord@codeaurora.org>
 Lorenzo Pieralisi <lpieralisi@kernel.org> <lorenzo.pieralisi@arm.com>
 Luca Ceresoli <luca.ceresoli@bootlin.com> <luca@lucaceresoli.net>
 Lukasz Luba <lukasz.luba@arm.com> <l.luba@partner.samsung.com>
+Luo Jie <quic_luoj@quicinc.com> <luoj@codeaurora.org>
 Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
 Maciej W. Rozycki <macro@orcam.me.uk> <macro@linux-mips.org>
+Maharaja Kennadyrajan <quic_mkenna@quicinc.com> <mkenna@codeaurora.org>
+Maheshwar Ajja <quic_majja@quicinc.com> <majja@codeaurora.org>
+Malathi Gottam <quic_mgottam@quicinc.com> <mgottam@codeaurora.org>
+Manikanta Pubbisetty <quic_mpubbise@quicinc.com> <mpubbise@codeaurora.org>
 Manivannan Sadhasivam <mani@kernel.org> <manivannanece23@gmail.com>
 Manivannan Sadhasivam <mani@kernel.org> <manivannan.sadhasivam@linaro.org>
+Manoj Basapathi <quic_manojbm@quicinc.com> <manojbm@codeaurora.org>
 Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
 Marc Zyngier <maz@kernel.org> <marc.zyngier@arm.com>
 Marek Behún <kabel@kernel.org> <marek.behun@nic.cz>
 Marek Behún <kabel@kernel.org> Marek Behun <marek.behun@nic.cz>
 Mark Brown <broonie@sirena.org.uk>
 Mark Starovoytov <mstarovo@pm.me> <mstarovoitov@marvell.com>
+Markus Schneider-Pargmann <msp@baylibre.com> <mpa@pengutronix.de>
 Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@puri.sm>
@@ -321,6 +380,7 @@ Matt Ranostay <matt.ranostay@konsulko.com> <matt@ranostay.consulting>
 Matt Ranostay <mranostay@gmail.com> Matthew Ranostay <mranostay@embeddedalley.com>
 Matt Ranostay <mranostay@gmail.com> <matt.ranostay@intel.com>
 Matt Redfearn <matt.redfearn@mips.com> <matt.redfearn@imgtec.com>
+Maulik Shah <quic_mkshah@quicinc.com> <mkshah@codeaurora.org>
 Mauro Carvalho Chehab <mchehab@kernel.org> <maurochehab@gmail.com>
 Mauro Carvalho Chehab <mchehab@kernel.org> <mchehab@brturbo.com.br>
 Mauro Carvalho Chehab <mchehab@kernel.org> <mchehab@infradead.org>
@@ -330,9 +390,13 @@ Mauro Carvalho Chehab <mchehab@kernel.org> <m.chehab@samsung.com>
 Mauro Carvalho Chehab <mchehab@kernel.org> <mchehab@s-opensource.com>
 Maxim Mikityanskiy <maxtram95@gmail.com> <maximmi@mellanox.com>
 Maxim Mikityanskiy <maxtram95@gmail.com> <maximmi@nvidia.com>
+Maxime Ripard <mripard@kernel.org> <maxime@cerno.tech>
 Maxime Ripard <mripard@kernel.org> <maxime.ripard@bootlin.com>
 Maxime Ripard <mripard@kernel.org> <maxime.ripard@free-electrons.com>
+Maya Erez <quic_merez@quicinc.com> <merez@codeaurora.org>
 Mayuresh Janorkar <mayur@ti.com>
+Md Sadre Alam <quic_mdalam@quicinc.com> <mdalam@codeaurora.org>
+Miaoqing Pan <quic_miaoqing@quicinc.com> <miaoqing@codeaurora.org>
 Michael Buesch <m@bues.ch>
 Michal Simek <michal.simek@amd.com> <michal.simek@xilinx.com>
 Michel Dänzer <michel@tungstengraphics.com>
@@ -343,6 +407,7 @@ Miguel Ojeda <ojeda@kernel.org> <miguel.ojeda.sandonis@gmail.com>
 Mike Rapoport <rppt@kernel.org> <mike@compulab.co.il>
 Mike Rapoport <rppt@kernel.org> <mike.rapoport@gmail.com>
 Mike Rapoport <rppt@kernel.org> <rppt@linux.ibm.com>
+Mike Tipton <quic_mdtipton@quicinc.com> <mdtipton@codeaurora.org>
 Miodrag Dinic <miodrag.dinic@mips.com> <miodrag.dinic@imgtec.com>
 Miquel Raynal <miquel.raynal@bootlin.com> <miquel.raynal@free-electrons.com>
 Mitesh shah <mshah@teja.com>
@@ -351,9 +416,13 @@ Morten Welinder <terra@gnome.org>
 Morten Welinder <welinder@anemone.rentec.com>
 Morten Welinder <welinder@darter.rentec.com>
 Morten Welinder <welinder@troll.com>
+Mukesh Ojha <quic_mojha@quicinc.com> <mojha@codeaurora.org>
+Muna Sinada <quic_msinada@quicinc.com> <msinada@codeaurora.org>
+Murali Nalajala <quic_mnalajal@quicinc.com> <mnalajal@codeaurora.org>
 Mythri P K <mythripk@ti.com>
 Nadia Yvette Chambers <nyc@holomorphy.com> William Lee Irwin III <wli@holomorphy.com>
 Nathan Chancellor <nathan@kernel.org> <natechancellor@gmail.com>
+Neeraj Upadhyay <quic_neeraju@quicinc.com> <neeraju@codeaurora.org>
 Neil Armstrong <neil.armstrong@linaro.org> <narmstrong@baylibre.com>
 Nguyen Anh Quynh <aquynh@gmail.com>
 Nicholas Piggin <npiggin@gmail.com> <npiggen@suse.de>
@@ -372,6 +441,7 @@ Nikolay Aleksandrov <razor@blackwall.org> <nikolay@redhat.com>
 Nikolay Aleksandrov <razor@blackwall.org> <nikolay@cumulusnetworks.com>
 Nikolay Aleksandrov <razor@blackwall.org> <nikolay@nvidia.com>
 Nikolay Aleksandrov <razor@blackwall.org> <nikolay@isovalent.com>
+Odelu Kukatla <quic_okukatla@quicinc.com> <okukatla@codeaurora.org>
 Oleksandr Natalenko <oleksandr@natalenko.name> <oleksandr@redhat.com>
 Oleksij Rempel <linux@rempel-privat.de> <bug-track@fisher-privat.net>
 Oleksij Rempel <linux@rempel-privat.de> <external.Oleksij.Rempel@de.bosch.com>
@@ -379,6 +449,7 @@ Oleksij Rempel <linux@rempel-privat.de> <fixed-term.Oleksij.Rempel@de.bosch.com>
 Oleksij Rempel <linux@rempel-privat.de> <o.rempel@pengutronix.de>
 Oleksij Rempel <linux@rempel-privat.de> <ore@pengutronix.de>
 Oliver Upton <oliver.upton@linux.dev> <oupton@google.com>
+Oza Pawandeep <quic_poza@quicinc.com> <poza@codeaurora.org>
 Pali Rohár <pali@kernel.org> <pali.rohar@gmail.com>
 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
 Patrick Mochel <mochel@digitalimplant.org>
@@ -390,11 +461,14 @@ Paul E. McKenney <paulmck@kernel.org> <paulmck@linux.vnet.ibm.com>
 Paul E. McKenney <paulmck@kernel.org> <paulmck@us.ibm.com>
 Paul Mackerras <paulus@ozlabs.org> <paulus@samba.org>
 Paul Mackerras <paulus@ozlabs.org> <paulus@au1.ibm.com>
+Pavankumar Kondeti <quic_pkondeti@quicinc.com> <pkondeti@codeaurora.org>
 Peter A Jonsson <pj@ludd.ltu.se>
 Peter Oruba <peter.oruba@amd.com>
 Peter Oruba <peter@oruba.de>
 Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
 Praveen BP <praveenbp@ti.com>
+Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> <pradeepc@codeaurora.org>
+Prasad Sodagudi <quic_psodagud@quicinc.com> <psodagud@codeaurora.org>
 Punit Agrawal <punitagrawal@gmail.com> <punit.agrawal@arm.com>
 Qais Yousef <qyousef@layalina.io> <qais.yousef@imgtec.com>
 Qais Yousef <qyousef@layalina.io> <qais.yousef@arm.com>
@@ -403,10 +477,16 @@ Quentin Perret <qperret@qperret.net> <quentin.perret@arm.com>
 Rafael J. Wysocki <rjw@rjwysocki.net> <rjw@sisk.pl>
 Rajeev Nandan <quic_rajeevny@quicinc.com> <rajeevny@codeaurora.org>
 Rajendra Nayak <quic_rjendra@quicinc.com> <rnayak@codeaurora.org>
+Rajeshwari Ravindra Kamble <quic_rkambl@quicinc.com> <rkambl@codeaurora.org>
+Raju P.L.S.S.S.N <quic_rplsssn@quicinc.com> <rplsssn@codeaurora.org>
 Rajesh Shah <rajesh.shah@intel.com>
+Rakesh Pillai <quic_pillair@quicinc.com> <pillair@codeaurora.org>
 Ralf Baechle <ralf@linux-mips.org>
 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+Ram Chandra Jangir <quic_rjangir@quicinc.com> <rjangir@codeaurora.org>
 Randy Dunlap <rdunlap@infradead.org> <rdunlap@xenotime.net>
+Ravi Kumar Bokka <quic_rbokka@quicinc.com> <rbokka@codeaurora.org>
+Ravi Kumar Siddojigari <quic_rsiddoji@quicinc.com> <rsiddoji@codeaurora.org>
 Rémi Denis-Courmont <rdenis@simphalempin.com>
 Ricardo Ribalda <ribalda@kernel.org> <ricardo@ribalda.com>
 Ricardo Ribalda <ribalda@kernel.org> Ricardo Ribalda Delgado <ribalda@kernel.org>
@@ -415,6 +495,7 @@ Richard Leitner <richard.leitner@linux.dev> <dev@g0hl1n.net>
 Richard Leitner <richard.leitner@linux.dev> <me@g0hl1n.net>
 Richard Leitner <richard.leitner@linux.dev> <richard.leitner@skidata.com>
 Robert Foss <rfoss@kernel.org> <robert.foss@linaro.org>
+Rocky Liao <quic_rjliao@quicinc.com> <rjliao@codeaurora.org>
 Roman Gushchin <roman.gushchin@linux.dev> <guro@fb.com>
 Roman Gushchin <roman.gushchin@linux.dev> <guroan@gmail.com>
 Roman Gushchin <roman.gushchin@linux.dev> <klamm@yandex-team.ru>
@@ -432,22 +513,37 @@ Santosh Shilimkar <santosh.shilimkar@oracle.org>
 Santosh Shilimkar <ssantosh@kernel.org>
 Sarangdhar Joshi <spjoshi@codeaurora.org>
 Sascha Hauer <s.hauer@pengutronix.de>
+Sahitya Tummala <quic_stummala@quicinc.com> <stummala@codeaurora.org>
+Sathishkumar Muruganandam <quic_murugana@quicinc.com> <murugana@codeaurora.org>
 Satya Priya <quic_c_skakit@quicinc.com> <skakit@codeaurora.org>
 S.Çağlar Onur <caglar@pardus.org.tr>
+Sayali Lokhande <quic_sayalil@quicinc.com> <sayalil@codeaurora.org>
 Sean Christopherson <seanjc@google.com> <sean.j.christopherson@intel.com>
 Sean Nyekjaer <sean@geanix.com> <sean.nyekjaer@prevas.dk>
+Sean Tranchetti <quic_stranche@quicinc.com> <stranche@codeaurora.org>
 Sebastian Reichel <sre@kernel.org> <sebastian.reichel@collabora.co.uk>
 Sebastian Reichel <sre@kernel.org> <sre@debian.org>
 Sedat Dilek <sedat.dilek@gmail.com> <sedat.dilek@credativ.de>
+Senthilkumar N L <quic_snlakshm@quicinc.com> <snlakshm@codeaurora.org>
 Seth Forshee <sforshee@kernel.org> <seth.forshee@canonical.com>
 Shannon Nelson <shannon.nelson@amd.com> <snelson@pensando.io>
+Shannon Nelson <shannon.nelson@amd.com> <shannon.nelson@intel.com>
+Shannon Nelson <shannon.nelson@amd.com> <shannon.nelson@oracle.com>
+Sharath Chandra Vurukala <quic_sharathv@quicinc.com> <sharathv@codeaurora.org>
 Shiraz Hashim <shiraz.linux.kernel@gmail.com> <shiraz.hashim@st.com>
 Shuah Khan <shuah@kernel.org> <shuahkhan@gmail.com>
 Shuah Khan <shuah@kernel.org> <shuah.khan@hp.com>
 Shuah Khan <shuah@kernel.org> <shuahkh@osg.samsung.com>
 Shuah Khan <shuah@kernel.org> <shuah.kh@samsung.com>
+Sibi Sankar <quic_sibis@quicinc.com> <sibis@codeaurora.org>
+Sid Manning <quic_sidneym@quicinc.com> <sidneym@codeaurora.org>
 Simon Arlott <simon@octiron.net> <simon@fire.lp0.eu>
+Simon Horman <horms@kernel.org> <simon.horman@corigine.com>
+Simon Horman <horms@kernel.org> <simon.horman@netronome.com>
 Simon Kelley <simon@thekelleys.org.uk>
+Sricharan Ramabadhran <quic_srichara@quicinc.com> <sricharan@codeaurora.org>
+Srinivas Ramana <quic_sramana@quicinc.com> <sramana@codeaurora.org>
+Sriram R <quic_srirrama@quicinc.com> <srirrama@codeaurora.org>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <stephen@networkplumber.org> <shemminger@linux-foundation.org>
 Stephen Hemminger <stephen@networkplumber.org> <shemminger@osdl.org>
@@ -455,22 +551,30 @@ Stephen Hemminger <stephen@networkplumber.org> <sthemmin@microsoft.com>
 Stephen Hemminger <stephen@networkplumber.org> <sthemmin@vyatta.com>
 Steve Wise <larrystevenwise@gmail.com> <swise@chelsio.com>
 Steve Wise <larrystevenwise@gmail.com> <swise@opengridcomputing.com>
-Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
+Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> <subashab@codeaurora.org>
+Subbaraman Narayanamurthy <quic_subbaram@quicinc.com> <subbaram@codeaurora.org>
 Subhash Jadavani <subhashj@codeaurora.org>
+Sudarshan Rajagopalan <quic_sudaraja@quicinc.com> <sudaraja@codeaurora.org>
 Sudeep Holla <sudeep.holla@arm.com> Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
 Sumit Semwal <sumit.semwal@ti.com>
+Surabhi Vishnoi <quic_svishnoi@quicinc.com> <svishnoi@codeaurora.org>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
+Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> <tamizhr@codeaurora.org>
+Taniya Das <quic_tdas@quicinc.com> <tdas@codeaurora.org>
 Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
 Thomas Körper <socketcan@esd.eu> <thomas.koerper@esd.eu>
 Thomas Pedersen <twp@codeaurora.org>
 Tiezhu Yang <yangtiezhu@loongson.cn> <kernelpatch@126.com>
+Tingwei Zhang <quic_tingwei@quicinc.com> <tingwei@codeaurora.org>
+Tirupathi Reddy <quic_tirupath@quicinc.com> <tirupath@codeaurora.org>
 Tobias Klauser <tklauser@distanz.ch> <tobias.klauser@gmail.com>
 Tobias Klauser <tklauser@distanz.ch> <klto@zhaw.ch>
 Tobias Klauser <tklauser@distanz.ch> <tklauser@nuerscht.ch>
 Tobias Klauser <tklauser@distanz.ch> <tklauser@xenon.tklauser.home>
 Todor Tomov <todor.too@gmail.com> <todor.tomov@linaro.org>
 Tony Luck <tony.luck@intel.com>
+Trilok Soni <quic_tsoni@quicinc.com> <tsoni@codeaurora.org>
 TripleX Chung <xxx.phy@gmail.com> <triplex@zh-kernel.org>
 TripleX Chung <xxx.phy@gmail.com> <zhongyu@18mail.cn>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
@@ -483,11 +587,17 @@ Uwe Kleine-König <ukleinek@strlen.de>
 Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
+Vara Reddy <quic_varar@quicinc.com> <varar@codeaurora.org>
+Varadarajan Narayanan <quic_varada@quicinc.com> <varada@codeaurora.org>
+Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> <vthiagar@codeaurora.org>
 Vasily Averin <vasily.averin@linux.dev> <vvs@virtuozzo.com>
 Vasily Averin <vasily.averin@linux.dev> <vvs@openvz.org>
 Vasily Averin <vasily.averin@linux.dev> <vvs@parallels.com>
 Vasily Averin <vasily.averin@linux.dev> <vvs@sw.ru>
 Valentin Schneider <vschneid@redhat.com> <valentin.schneider@arm.com>
+Veera Sundaram Sankaran <quic_veeras@quicinc.com> <veeras@codeaurora.org>
+Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com> <vbadigan@codeaurora.org>
+Venkateswara Naralasetty <quic_vnaralas@quicinc.com> <vnaralas@codeaurora.org>
 Vikash Garodia <quic_vgarodia@quicinc.com> <vgarodia@codeaurora.org>
 Vinod Koul <vkoul@kernel.org> <vinod.koul@intel.com>
 Vinod Koul <vkoul@kernel.org> <vinod.koul@linux.intel.com>
@@ -497,11 +607,14 @@ Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
 Viresh Kumar <viresh.kumar@linaro.org> <viresh.kumar@linaro.org>
 Viresh Kumar <viresh.kumar@linaro.org> <viresh.kumar@linaro.com>
+Vivek Aknurwar <quic_viveka@quicinc.com> <viveka@codeaurora.org>
 Vivien Didelot <vivien.didelot@gmail.com> <vivien.didelot@savoirfairelinux.com>
 Vlad Dogaru <ddvlad@gmail.com> <vlad.dogaru@intel.com>
 Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
 Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
 WeiXiong Liao <gmpy.liaowx@gmail.com> <liaoweixiong@allwinnertech.com>
+Wen Gong <quic_wgong@quicinc.com> <wgong@codeaurora.org>
+Wesley Cheng <quic_wcheng@quicinc.com> <wcheng@codeaurora.org>
 Will Deacon <will@kernel.org> <will.deacon@arm.com>
 Wolfram Sang <wsa@kernel.org> <w.sang@pengutronix.de>
 Wolfram Sang <wsa@kernel.org> <wsa@the-dreams.de>
diff --git a/CREDITS b/CREDITS
index de7e4dbbc5991..8b4882024635d 100644
--- a/CREDITS
+++ b/CREDITS
@@ -383,6 +383,12 @@ E: tomas@nocrew.org
 W: http://tomas.nocrew.org/
 D: dsp56k device driver
 
+N: Srivatsa S. Bhat
+E: srivatsa@csail.mit.edu
+D: Maintainer of Generic Paravirt-Ops subsystem
+D: Maintainer of VMware hypervisor interface
+D: Maintainer of VMware virtual PTP clock driver (ptp_vmw)
+
 N: Ross Biro
 E: ross.biro@gmail.com
 D: Original author of the Linux networking code
diff --git a/Documentation/ABI/obsolete/o2cb b/Documentation/ABI/obsolete/o2cb
index fe7e45e17bc79..8f39b596731d2 100644
--- a/Documentation/ABI/obsolete/o2cb
+++ b/Documentation/ABI/obsolete/o2cb
@@ -1,11 +1,11 @@
 What:		/sys/o2cb
 Date:		Dec 2005
 KernelVersion:	2.6.16
-Contact:	ocfs2-devel@oss.oracle.com
+Contact:	ocfs2-devel@lists.linux.dev
 Description:	Ocfs2-tools looks at 'interface-revision' for versioning
 		information. Each logmask/ file controls a set of debug prints
 		and can be written into with the strings "allow", "deny", or
 		"off". Reading the file returns the current state.
 		Was renamed to /sys/fs/u2cb/
 Users:		ocfs2-tools. It's sufficient to mail proposed changes to
-		ocfs2-devel@oss.oracle.com.
+		ocfs2-devel@lists.linux.dev.
diff --git a/Documentation/ABI/removed/o2cb b/Documentation/ABI/removed/o2cb
index 20c91adca6d41..61cff238fbe8a 100644
--- a/Documentation/ABI/removed/o2cb
+++ b/Documentation/ABI/removed/o2cb
@@ -1,10 +1,10 @@
 What:		/sys/o2cb symlink
 Date:		May 2011
 KernelVersion:	3.0
-Contact:	ocfs2-devel@oss.oracle.com
+Contact:	ocfs2-devel@lists.linux.dev
 Description:	This is a symlink: /sys/o2cb to /sys/fs/o2cb. The symlink is
 		removed when new versions of ocfs2-tools which know to look
 		in /sys/fs/o2cb are sufficiently prevalent. Don't code new
 		software to look here, it should try /sys/fs/o2cb instead.
 Users:		ocfs2-tools. It's sufficient to mail proposed changes to
-		ocfs2-devel@oss.oracle.com.
+		ocfs2-devel@lists.linux.dev.
diff --git a/Documentation/ABI/stable/o2cb b/Documentation/ABI/stable/o2cb
index b62a967f01a06..3a83b5c54e93b 100644
--- a/Documentation/ABI/stable/o2cb
+++ b/Documentation/ABI/stable/o2cb
@@ -1,10 +1,10 @@
 What:		/sys/fs/o2cb/
 Date:		Dec 2005
 KernelVersion:	2.6.16
-Contact:	ocfs2-devel@oss.oracle.com
+Contact:	ocfs2-devel@lists.linux.dev
 Description:	Ocfs2-tools looks at 'interface-revision' for versioning
 		information. Each logmask/ file controls a set of debug prints
 		and can be written into with the strings "allow", "deny", or
 		"off". Reading the file returns the current state.
 Users:		ocfs2-tools. It's sufficient to mail proposed changes to
-		ocfs2-devel@oss.oracle.com.
+		ocfs2-devel@lists.linux.dev.
diff --git a/Documentation/ABI/stable/sysfs-platform-wmi-bmof b/Documentation/ABI/stable/sysfs-platform-wmi-bmof
new file mode 100644
index 0000000000000..a786504b6027e
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-platform-wmi-bmof
@@ -0,0 +1,7 @@
+What:		/sys/bus/wmi/devices/05901221-D566-11D1-B2F0-00A0C9062910[-X]/bmof
+Date:		Jun 2017
+KernelVersion:	4.13
+Description:
+		Binary MOF metadata used to decribe the details of available ACPI WMI interfaces.
+
+		See Documentation/wmi/devices/wmi-bmof.rst for details.
diff --git a/Documentation/ABI/testing/debugfs-dell-wmi-ddv b/Documentation/ABI/testing/debugfs-dell-wmi-ddv
index fbcc5d6f73885..81cfc788be15e 100644
--- a/Documentation/ABI/testing/debugfs-dell-wmi-ddv
+++ b/Documentation/ABI/testing/debugfs-dell-wmi-ddv
@@ -3,19 +3,32 @@ Date:		September 2022
 KernelVersion:	6.1
 Contact:	Armin Wolf <W_Armin@gmx.de>
 Description:
-		This file contains the contents of the fan sensor information buffer,
-		which contains fan sensor entries and a terminating character (0xFF).
+		This file contains the contents of the fan sensor information
+		buffer, which contains fan sensor entries and a terminating
+		character (0xFF).
 
-		Each fan sensor entry consists of three bytes with an unknown meaning,
-		interested people may use this file for reverse-engineering.
+		Each fan sensor entry contains:
+
+		- fan type (single byte)
+		- fan speed in RPM (two bytes, little endian)
+
+		See Documentation/wmi/devices/dell-wmi-ddv.rst for details.
 
 What:		/sys/kernel/debug/dell-wmi-ddv-<wmi_device_name>/thermal_sensor_information
 Date:		September 2022
 KernelVersion:	6.1
 Contact:	Armin Wolf <W_Armin@gmx.de>
 Description:
-		This file contains the contents of the thermal sensor information buffer,
-		which contains thermal sensor entries and a terminating character (0xFF).
+		This file contains the contents of the thermal sensor information
+		buffer, which contains thermal sensor entries and a terminating
+		character (0xFF).
+
+		Each thermal sensor entry contains:
+
+		- thermal type (single byte)
+		- current temperature (single byte)
+		- min. temperature (single byte)
+		- max. temperature (single byte)
+		- unknown field (single byte)
 
-		Each thermal sensor entry consists of five bytes with an unknown meaning,
-		interested people may use this file for reverse-engineering.
+		See Documentation/wmi/devices/dell-wmi-ddv.rst for details.
diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device
index 7ac7b19b2f722..2d543cfa4079a 100644
--- a/Documentation/ABI/testing/sysfs-block-device
+++ b/Documentation/ABI/testing/sysfs-block-device
@@ -95,3 +95,25 @@ Description:
 		This file does not exist if the HBA driver does not implement
 		support for the SATA NCQ priority feature, regardless of the
 		device support for this feature.
+
+
+What:		/sys/block/*/device/cdl_supported
+Date:		May, 2023
+KernelVersion:	v6.5
+Contact:	linux-scsi@vger.kernel.org
+Description:
+		(RO) Indicates if the device supports the command duration
+		limits feature found in some ATA and SCSI devices.
+
+
+What:		/sys/block/*/device/cdl_enable
+Date:		May, 2023
+KernelVersion:	v6.5
+Contact:	linux-scsi@vger.kernel.org
+Description:
+		(RW) For a device supporting the command duration limits
+		feature, write to the file to turn on or off the feature.
+		By default this feature is turned off.
+		Writing "1" to this file enables the use of command duration
+		limits for read and write commands in the kernel and turns on
+		the feature on the device. Writing "0" disables the feature.
diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter
index 1417c4272c6ca..dc3b3a5c876b2 100644
--- a/Documentation/ABI/testing/sysfs-bus-counter
+++ b/Documentation/ABI/testing/sysfs-bus-counter
@@ -90,6 +90,60 @@ Description:
 			counter does not freeze at the boundary points, but
 			counts continuously throughout.
 
+		interrupt on terminal count:
+			The output signal is initially low, and will remain low
+			until the counter reaches zero. The output signal then
+			goes high and remains high until a new preset value is
+			set.
+
+		hardware retriggerable one-shot:
+			The output signal is initially high. The output signal
+			will go low by a trigger input signal, and will remain
+			low until the counter reaches zero. The output will then
+			go high and remain high until the next trigger. A
+			trigger results in loading the counter to the preset
+			value and setting the output signal low, thus starting
+			the one-shot pulse.
+
+		rate generator:
+			The output signal is initially high. When the counter
+			has decremented to 1, the output signal goes low for one
+			clock pulse. The output signal then goes high again, the
+			counter is reloaded to the preset value, and the process
+			repeats in a periodic manner as such.
+
+		square wave mode:
+			The output signal is initially high.
+
+			If the initial count is even, the counter is decremented
+			by two on succeeding clock pulses. When the count
+			expires, the output signal changes value and the
+			counter is reloaded to the preset value. The process
+			repeats in periodic manner as such.
+
+			If the initial count is odd, the initial count minus one
+			(an even number) is loaded and then is decremented by
+			two on succeeding clock pulses. One clock pulse after
+			the count expires, the output signal goes low and the
+			counter is reloaded to the preset value minus one.
+			Succeeding clock pulses decrement the count by two. When
+			the count expires, the output goes high again and the
+			counter is reloaded to the preset value minus one. The
+			process repeats in a periodic manner as such.
+
+		software triggered strobe:
+			The output signal is initially high. When the count
+			expires, the output will go low for one clock pulse and
+			then go high again. The counting sequence is "triggered"
+			by setting the preset value.
+
+		hardware triggered strobe:
+			The output signal is initially high. Counting is started
+			by a trigger input signal. When the count expires, the
+			output signal will go low for one clock pulse and then
+			go high again. A trigger results in loading the counter
+			to the preset value.
+
 What:		/sys/bus/counter/devices/counterX/countY/count_mode_available
 What:		/sys/bus/counter/devices/counterX/countY/error_noise_available
 What:		/sys/bus/counter/devices/counterX/countY/function_available
diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
index 48ac0d911801a..087f762ebfd53 100644
--- a/Documentation/ABI/testing/sysfs-bus-cxl
+++ b/Documentation/ABI/testing/sysfs-bus-cxl
@@ -58,6 +58,65 @@ Description:
 		affinity for this device.
 
 
+What:		/sys/bus/cxl/devices/memX/security/state
+Date:		June, 2023
+KernelVersion:	v6.5
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) Reading this file will display the CXL security state for
+		that device. Such states can be: 'disabled', 'sanitize', when
+		a sanitization is currently underway; or those available only
+		for persistent memory: 'locked', 'unlocked' or 'frozen'. This
+		sysfs entry is select/poll capable from userspace to notify
+		upon completion of a sanitize operation.
+
+
+What:           /sys/bus/cxl/devices/memX/security/sanitize
+Date:           June, 2023
+KernelVersion:  v6.5
+Contact:        linux-cxl@vger.kernel.org
+Description:
+		(WO) Write a boolean 'true' string value to this attribute to
+		sanitize the device to securely re-purpose or decommission it.
+		This is done by ensuring that all user data and meta-data,
+		whether it resides in persistent capacity, volatile capacity,
+		or the LSA, is made permanently unavailable by whatever means
+		is appropriate for the media type. This functionality requires
+		the device to be disabled, that is, not actively decoding any
+		HPA ranges. This permits avoiding explicit global CPU cache
+		management, relying instead for it to be done when a region
+		transitions between software programmed and hardware committed
+		states. If this file is not present, then there is no hardware
+		support for the operation.
+
+
+What            /sys/bus/cxl/devices/memX/security/erase
+Date:           June, 2023
+KernelVersion:  v6.5
+Contact:        linux-cxl@vger.kernel.org
+Description:
+		(WO) Write a boolean 'true' string value to this attribute to
+		secure erase user data by changing the media encryption keys for
+		all user data areas of the device. This functionality requires
+		the device to be disabled, that is, not actively decoding any
+		HPA ranges. This permits avoiding explicit global CPU cache
+		management, relying instead for it to be done when a region
+		transitions between software programmed and hardware committed
+		states. If this file is not present, then there is no hardware
+		support for the operation.
+
+
+What:		/sys/bus/cxl/devices/memX/firmware/
+Date:		April, 2023
+KernelVersion:	v6.5
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RW) Firmware uploader mechanism. The different files under
+		this directory can be used to upload and activate new
+		firmware for CXL devices. The interfaces under this are
+		documented in sysfs-class-firmware.
+
+
 What:		/sys/bus/cxl/devices/*/devtype
 Date:		June, 2021
 KernelVersion:	v5.14
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index cb172db41b34b..be663258b9b79 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -292,6 +292,16 @@ Description:
 		which is marked with early_stop has failed to initialize, it will ignore
 		all future connections until this attribute is clear.
 
+What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/state
+Date:		June 2023
+Contact:	Roy Luo <royluo@google.com>
+Description:
+		Indicates current state of the USB device attached to the port.
+		Valid states are: 'not-attached', 'attached', 'powered',
+		'reconnecting', 'unauthenticated', 'default', 'addressed',
+		'configured', and 'suspended'. This file supports poll() to
+		monitor the state change from user space.
+
 What:		/sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
 Date:		May 2013
 Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes
index 4cdba3477176f..1b3ecae80b3dd 100644
--- a/Documentation/ABI/testing/sysfs-class-firmware-attributes
+++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes
@@ -243,8 +243,8 @@ Description:
 
 		index:
 					Used with HDD and NVME authentication to set the drive index
-					that is being referenced (e.g hdd0, hdd1 etc)
-					This attribute defaults to device 0.
+					that is being referenced (e.g hdd1, hdd2 etc)
+					This attribute defaults to device 1.
 
 		certificate, signature, save_signature:
 					These attributes are used for certificate based authentication. This is
diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-aw200xx b/Documentation/ABI/testing/sysfs-class-led-driver-aw200xx
new file mode 100644
index 0000000000000..6d4449cf9d71f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-led-driver-aw200xx
@@ -0,0 +1,5 @@
+What:		/sys/class/leds/<led>/dim
+Date:		May 2023
+Description:	64-level DIM current. If you write a negative value or
+		"auto", the dim will be calculated according to the
+		brightness.
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
index 646540950e381..78b62a23b14a0 100644
--- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
@@ -13,6 +13,11 @@ Description:
 		Specifies the duration of the LED blink in milliseconds.
 		Defaults to 50 ms.
 
+		With hw_control ON, the interval value MUST be set to the
+		default value and cannot be changed.
+		Trying to set any value in this specific mode will return
+		an EINVAL error.
+
 What:		/sys/class/leds/<led>/link
 Date:		Dec 2017
 KernelVersion:	4.16
@@ -39,6 +44,9 @@ Description:
 		If set to 1, the LED will blink for the milliseconds specified
 		in interval to signal transmission.
 
+		With hw_control ON, the blink interval is controlled by hardware
+		and won't reflect the value set in interval.
+
 What:		/sys/class/leds/<led>/rx
 Date:		Dec 2017
 KernelVersion:	4.16
@@ -50,3 +58,84 @@ Description:
 
 		If set to 1, the LED will blink for the milliseconds specified
 		in interval to signal reception.
+
+		With hw_control ON, the blink interval is controlled by hardware
+		and won't reflect the value set in interval.
+
+What:		/sys/class/leds/<led>/hw_control
+Date:		Jun 2023
+KernelVersion:	6.5
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Communicate whether the LED trigger modes are driven by hardware
+		or software fallback is used.
+
+		If 0, the LED is using software fallback to blink.
+
+		If 1, the LED is using hardware control to blink and signal the
+		requested modes.
+
+What:		/sys/class/leds/<led>/link_10
+Date:		Jun 2023
+KernelVersion:	6.5
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 10Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 10MBps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/link_100
+Date:		Jun 2023
+KernelVersion:	6.5
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 100Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 100Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/link_1000
+Date:		Jun 2023
+KernelVersion:	6.5
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 1000Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 1000Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/half_duplex
+Date:		Jun 2023
+KernelVersion:	6.5
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link half duplex state of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link half
+		duplex state of the named network device.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/full_duplex
+Date:		Jun 2023
+KernelVersion:	6.5
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link full duplex state of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link full
+		duplex state of the named network device.
+		Setting this value also immediately changes the LED state.
diff --git a/Documentation/ABI/testing/sysfs-class-net-qmi b/Documentation/ABI/testing/sysfs-class-net-qmi
index 47e6b97323379..b028f5bc86db5 100644
--- a/Documentation/ABI/testing/sysfs-class-net-qmi
+++ b/Documentation/ABI/testing/sysfs-class-net-qmi
@@ -62,7 +62,7 @@ Description:
 What:		/sys/class/net/<iface>/qmi/pass_through
 Date:		January 2021
 KernelVersion:	5.12
-Contact:	Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
+Contact:	Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
 Description:
 		Boolean.  Default: 'N'
 
diff --git a/Documentation/ABI/testing/sysfs-devices-hisi_ptt b/Documentation/ABI/testing/sysfs-devices-hisi_ptt
index 82de6d7102660..d7e206b4901c0 100644
--- a/Documentation/ABI/testing/sysfs-devices-hisi_ptt
+++ b/Documentation/ABI/testing/sysfs-devices-hisi_ptt
@@ -59,3 +59,55 @@ Description:	(RW) Control the allocated buffer watermark of outbound packets.
 		The available tune data is [0, 1, 2]. Writing a negative value
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/root_port_filters
+Date:		May 2023
+KernelVersion:	6.5
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	This directory contains the files providing the PCIe Root Port filters
+		information used for PTT trace. Each file is named after the supported
+		Root Port device name <domain>:<bus>:<device>.<function>.
+
+		See the description of the "filter" in Documentation/trace/hisi-ptt.rst
+		for more information.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/root_port_filters/multiselect
+Date:		May 2023
+KernelVersion:	6.5
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(Read) Indicates if this kind of filter can be selected at the same
+		time as others filters, or must be used on it's own. 1 indicates
+		the former case and 0 indicates the latter.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/root_port_filters/<bdf>
+Date:		May 2023
+KernelVersion:	6.5
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(Read) Indicates the filter value of this Root Port filter, which
+		can be used to control the TLP headers to trace by the PTT trace.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/requester_filters
+Date:		May 2023
+KernelVersion:	6.5
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	This directory contains the files providing the PCIe Requester filters
+		information used for PTT trace. Each file is named after the supported
+		Endpoint device name <domain>:<bus>:<device>.<function>.
+
+		See the description of the "filter" in Documentation/trace/hisi-ptt.rst
+		for more information.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/requester_filters/multiselect
+Date:		May 2023
+KernelVersion:	6.5
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(Read) Indicates if this kind of filter can be selected at the same
+		time as others filters, or must be used on it's own. 1 indicates
+		the former case and 0 indicates the latter.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/requester_filters/<bdf>
+Date:		May 2023
+KernelVersion:	6.5
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(Read) Indicates the filter value of this Requester filter, which
+		can be used to control the TLP headers to trace by the PTT trace.
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index f54867cadb0f6..77942eedf4f69 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -513,17 +513,18 @@ Description:	information about CPUs heterogeneity.
 		cpu_capacity: capacity of cpuX.
 
 What:		/sys/devices/system/cpu/vulnerabilities
+		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+		/sys/devices/system/cpu/vulnerabilities/l1tf
+		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
+		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/retbleed
+		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
-		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
-		/sys/devices/system/cpu/vulnerabilities/l1tf
-		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/srbds
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
-		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
-		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
-		/sys/devices/system/cpu/vulnerabilities/retbleed
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
@@ -670,7 +671,7 @@ Description:	Preferred MTE tag checking mode
 		"async"	  	  Prefer asynchronous mode
 		================  ==============================================
 
-		See also: Documentation/arm64/memory-tagging-extension.rst
+		See also: Documentation/arch/arm64/memory-tagging-extension.rst
 
 What:		/sys/devices/system/cpu/nohz_full
 Date:		Apr 2015
diff --git a/Documentation/ABI/testing/sysfs-driver-eud b/Documentation/ABI/testing/sysfs-driver-eud
index 83f3872182a40..2bab0db2d2f0f 100644
--- a/Documentation/ABI/testing/sysfs-driver-eud
+++ b/Documentation/ABI/testing/sysfs-driver-eud
@@ -1,4 +1,4 @@
-What:		/sys/bus/platform/drivers/eud/.../enable
+What:		/sys/bus/platform/drivers/qcom_eud/.../enable
 Date:           February 2022
 Contact:        Souradeep Chowdhury <quic_schowdhu@quicinc.com>
 Description:
diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat
index 087842b1969e7..ef6d6c57105ef 100644
--- a/Documentation/ABI/testing/sysfs-driver-qat
+++ b/Documentation/ABI/testing/sysfs-driver-qat
@@ -27,7 +27,18 @@ Description:	(RW) Reports the current configuration of the QAT device.
 
 		* sym;asym: the device is configured for running crypto
 		  services
+		* asym;sym: identical to sym;asym
 		* dc: the device is configured for running compression services
+		* sym: the device is configured for running symmetric crypto
+		  services
+		* asym: the device is configured for running asymmetric crypto
+		  services
+		* asym;dc: the device is configured for running asymmetric
+		  crypto services and compression services
+		* dc;asym: identical to asym;dc
+		* sym;dc: the device is configured for running symmetric crypto
+		  services and compression services
+		* dc;sym: identical to sym;dc
 
 		It is possible to set the configuration only if the device
 		is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state)
@@ -47,3 +58,38 @@ Description:	(RW) Reports the current configuration of the QAT device.
 			dc
 
 		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
+Date:		June 2023
+KernelVersion:	6.5
+Contact:	qat-linux@intel.com
+Description:	(RW) This configuration option provides a way to force the device into remaining in
+		the MAX power state.
+		If idle support is enabled the device will transition to the `MIN` power state when
+		idle, otherwise will stay in the MAX power state.
+		Write to the file to enable or disable idle support.
+
+		The values are:
+
+		* 0: idle support is disabled
+		* 1: idle support is enabled
+
+		Default value is 1.
+
+		It is possible to set the pm_idle_enabled value only if the device
+		is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state)
+
+		The following example shows how to change the pm_idle_enabled of
+		a device::
+
+			# cat /sys/bus/pci/devices/<BDF>/qat/state
+			up
+			# cat /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
+			1
+			# echo down > /sys/bus/pci/devices/<BDF>/qat/state
+			# echo 0 > /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
+			# echo up > /sys/bus/pci/devices/<BDF>/qat/state
+			# cat /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
+			0
+
+		This attribute is only available for qat_4xxx devices.
diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
index 228aa43e14ed5..e487f969a15ea 100644
--- a/Documentation/ABI/testing/sysfs-driver-ufs
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -994,7 +994,7 @@ Description:	This file shows the amount of physical memory needed
 What:		/sys/bus/platform/drivers/ufshcd/*/rpm_lvl
 What:		/sys/bus/platform/devices/*.ufs/rpm_lvl
 Date:		September 2014
-Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This entry could be used to set or show the UFS device
 		runtime power management level. The current driver
 		implementation supports 7 levels with next target states:
@@ -1021,7 +1021,7 @@ Description:	This entry could be used to set or show the UFS device
 What:		/sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
 What:		/sys/bus/platform/devices/*.ufs/rpm_target_dev_state
 Date:		February 2018
-Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This entry shows the target power mode of an UFS device
 		for the chosen runtime power management level.
 
@@ -1030,7 +1030,7 @@ Description:	This entry shows the target power mode of an UFS device
 What:		/sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state
 What:		/sys/bus/platform/devices/*.ufs/rpm_target_link_state
 Date:		February 2018
-Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This entry shows the target state of an UFS UIC link
 		for the chosen runtime power management level.
 
@@ -1039,7 +1039,7 @@ Description:	This entry shows the target state of an UFS UIC link
 What:		/sys/bus/platform/drivers/ufshcd/*/spm_lvl
 What:		/sys/bus/platform/devices/*.ufs/spm_lvl
 Date:		September 2014
-Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This entry could be used to set or show the UFS device
 		system power management level. The current driver
 		implementation supports 7 levels with next target states:
@@ -1066,7 +1066,7 @@ Description:	This entry could be used to set or show the UFS device
 What:		/sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state
 What:		/sys/bus/platform/devices/*.ufs/spm_target_dev_state
 Date:		February 2018
-Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This entry shows the target power mode of an UFS device
 		for the chosen system power management level.
 
@@ -1075,7 +1075,7 @@ Description:	This entry shows the target power mode of an UFS device
 What:		/sys/bus/platform/drivers/ufshcd/*/spm_target_link_state
 What:		/sys/bus/platform/devices/*.ufs/spm_target_link_state
 Date:		February 2018
-Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This entry shows the target state of an UFS UIC link
 		for the chosen system power management level.
 
@@ -1084,7 +1084,7 @@ Description:	This entry shows the target state of an UFS UIC link
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/monitor_enable
 What:		/sys/bus/platform/devices/*.ufs/monitor/monitor_enable
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the status of performance monitor enablement
 		and it can be used to start/stop the monitor. When the monitor
 		is stopped, the performance data collected is also cleared.
@@ -1092,7 +1092,7 @@ Description:	This file shows the status of performance monitor enablement
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/monitor_chunk_size
 What:		/sys/bus/platform/devices/*.ufs/monitor/monitor_chunk_size
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file tells the monitor to focus on requests transferring
 		data of specific chunk size (in Bytes). 0 means any chunk size.
 		It can only be changed when monitor is disabled.
@@ -1100,7 +1100,7 @@ Description:	This file tells the monitor to focus on requests transferring
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_total_sectors
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_total_sectors
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows how many sectors (in 512 Bytes) have been
 		sent from device to host after monitor gets started.
 
@@ -1109,7 +1109,7 @@ Description:	This file shows how many sectors (in 512 Bytes) have been
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_total_busy
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_total_busy
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows how long (in micro seconds) has been spent
 		sending data from device to host after monitor gets started.
 
@@ -1118,7 +1118,7 @@ Description:	This file shows how long (in micro seconds) has been spent
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_nr_requests
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_nr_requests
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows how many read requests have been sent after
 		monitor gets started.
 
@@ -1127,7 +1127,7 @@ Description:	This file shows how many read requests have been sent after
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_max
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_req_latency_max
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the maximum latency (in micro seconds) of
 		read requests after monitor gets started.
 
@@ -1136,7 +1136,7 @@ Description:	This file shows the maximum latency (in micro seconds) of
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_min
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_req_latency_min
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the minimum latency (in micro seconds) of
 		read requests after monitor gets started.
 
@@ -1145,7 +1145,7 @@ Description:	This file shows the minimum latency (in micro seconds) of
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_avg
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_req_latency_avg
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the average latency (in micro seconds) of
 		read requests after monitor gets started.
 
@@ -1154,7 +1154,7 @@ Description:	This file shows the average latency (in micro seconds) of
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_sum
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_req_latency_sum
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the total latency (in micro seconds) of
 		read requests sent after monitor gets started.
 
@@ -1163,7 +1163,7 @@ Description:	This file shows the total latency (in micro seconds) of
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_total_sectors
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_total_sectors
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows how many sectors (in 512 Bytes) have been sent
 		from host to device after monitor gets started.
 
@@ -1172,7 +1172,7 @@ Description:	This file shows how many sectors (in 512 Bytes) have been sent
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_total_busy
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_total_busy
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows how long (in micro seconds) has been spent
 		sending data from host to device after monitor gets started.
 
@@ -1181,7 +1181,7 @@ Description:	This file shows how long (in micro seconds) has been spent
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_nr_requests
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_nr_requests
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows how many write requests have been sent after
 		monitor gets started.
 
@@ -1190,7 +1190,7 @@ Description:	This file shows how many write requests have been sent after
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_max
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_req_latency_max
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the maximum latency (in micro seconds) of write
 		requests after monitor gets started.
 
@@ -1199,7 +1199,7 @@ Description:	This file shows the maximum latency (in micro seconds) of write
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_min
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_req_latency_min
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the minimum latency (in micro seconds) of write
 		requests after monitor gets started.
 
@@ -1208,7 +1208,7 @@ Description:	This file shows the minimum latency (in micro seconds) of write
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_avg
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_req_latency_avg
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the average latency (in micro seconds) of write
 		requests after monitor gets started.
 
@@ -1217,7 +1217,7 @@ Description:	This file shows the average latency (in micro seconds) of write
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_req_latency_sum
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the total latency (in micro seconds) of write
 		requests after monitor gets started.
 
@@ -1226,7 +1226,7 @@ Description:	This file shows the total latency (in micro seconds) of write
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
 What:		/sys/bus/platform/devices/*.ufs/device_descriptor/wb_presv_us_en
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows if preserve user-space was configured
 
 		The file is read only.
@@ -1234,7 +1234,7 @@ Description:	This entry shows if preserve user-space was configured
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units
 What:		/sys/bus/platform/devices/*.ufs/device_descriptor/wb_shared_alloc_units
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the shared allocated units of WB buffer
 
 		The file is read only.
@@ -1242,7 +1242,7 @@ Description:	This entry shows the shared allocated units of WB buffer
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type
 What:		/sys/bus/platform/devices/*.ufs/device_descriptor/wb_type
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the configured WB type.
 		0x1 for shared buffer mode. 0x0 for dedicated buffer mode.
 
@@ -1251,7 +1251,7 @@ Description:	This entry shows the configured WB type.
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj
 What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_buff_cap_adj
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the total user-space decrease in shared
 		buffer mode.
 		The value of this parameter is 3 for TLC NAND when SLC mode
@@ -1262,7 +1262,7 @@ Description:	This entry shows the total user-space decrease in shared
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units
 What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_alloc_units
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the Maximum total WriteBooster Buffer size
 		which is supported by the entire device.
 
@@ -1271,7 +1271,7 @@ Description:	This entry shows the Maximum total WriteBooster Buffer size
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns
 What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_wb_luns
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the maximum number of luns that can support
 		WriteBooster.
 
@@ -1280,7 +1280,7 @@ Description:	This entry shows the maximum number of luns that can support
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type
 What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_red_type
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	The supportability of user space reduction mode
 		and preserve user space mode.
 		00h: WriteBooster Buffer can be configured only in
@@ -1295,7 +1295,7 @@ Description:	The supportability of user space reduction mode
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type
 What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_wb_type
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	The supportability of WriteBooster Buffer type.
 
 		===  ==========================================================
@@ -1310,7 +1310,7 @@ Description:	The supportability of WriteBooster Buffer type.
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_enable
 What:		/sys/bus/platform/devices/*.ufs/flags/wb_enable
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the status of WriteBooster.
 
 		== ============================
@@ -1323,7 +1323,7 @@ Description:	This entry shows the status of WriteBooster.
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en
 What:		/sys/bus/platform/devices/*.ufs/flags/wb_flush_en
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows if flush is enabled.
 
 		== =================================
@@ -1336,7 +1336,7 @@ Description:	This entry shows if flush is enabled.
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8
 What:		/sys/bus/platform/devices/*.ufs/flags/wb_flush_during_h8
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	Flush WriteBooster Buffer during hibernate state.
 
 		== =================================================
@@ -1351,7 +1351,7 @@ Description:	Flush WriteBooster Buffer during hibernate state.
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf
 What:		/sys/bus/platform/devices/*.ufs/attributes/wb_avail_buf
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the amount of unused WriteBooster buffer
 		available.
 
@@ -1360,7 +1360,7 @@ Description:	This entry shows the amount of unused WriteBooster buffer
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf
 What:		/sys/bus/platform/devices/*.ufs/attributes/wb_cur_buf
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the amount of unused current buffer.
 
 		The file is read only.
@@ -1368,7 +1368,7 @@ Description:	This entry shows the amount of unused current buffer.
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status
 What:		/sys/bus/platform/devices/*.ufs/attributes/wb_flush_status
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the flush operation status.
 
 
@@ -1385,7 +1385,7 @@ Description:	This entry shows the flush operation status.
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est
 What:		/sys/bus/platform/devices/*.ufs/attributes/wb_life_time_est
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows an indication of the WriteBooster Buffer
 		lifetime based on the amount of performed program/erase cycles
 
@@ -1399,7 +1399,7 @@ Description:	This entry shows an indication of the WriteBooster Buffer
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the configured size of WriteBooster buffer.
 		0400h corresponds to 4GB.
 
@@ -1426,6 +1426,17 @@ Description:	This entry shows the status of WriteBooster buffer flushing
 		If flushing is enabled, the device executes the flush
 		operation when the command queue is empty.
 
+What:		/sys/bus/platform/drivers/ufshcd/*/wb_flush_threshold
+What:		/sys/bus/platform/devices/*.ufs/wb_flush_threshold
+Date:		June 2023
+Contact:	Lu Hongfei <luhongfei@vivo.com>
+Description:
+		wb_flush_threshold represents the threshold for flushing WriteBooster buffer,
+		whose value expressed in unit of 10% granularity, such as '1' representing 10%,
+		'2' representing 20%, and so on.
+		If avail_wb_buff < wb_flush_threshold, it indicates that WriteBooster buffer needs to
+		be flushed, otherwise it is not necessary.
+
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/hpb_version
 What:		/sys/bus/platform/devices/*.ufs/device_descriptor/hpb_version
 Date:		June 2021
diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module
index 08886367d0470..62addab47d0c5 100644
--- a/Documentation/ABI/testing/sysfs-module
+++ b/Documentation/ABI/testing/sysfs-module
@@ -60,3 +60,14 @@ Description:	Module taint flags:
 			C   staging driver module
 			E   unsigned module
 			==  =====================
+
+What:		/sys/module/grant_table/parameters/free_per_iteration
+Date:		July 2023
+KernelVersion:	6.5 but backported to all supported stable branches
+Contact:	Xen developer discussion <xen-devel@lists.xenproject.org>
+Description:	Read and write number of grant entries to attempt to free per iteration.
+
+		Note: Future versions of Xen and Linux may provide a better
+		interface for controlling the rate of deferred grant reclaim
+		or may not need it at all.
+Users:		Qubes OS (https://www.qubes-os.org)
diff --git a/Documentation/ABI/testing/sysfs-ocfs2 b/Documentation/ABI/testing/sysfs-ocfs2
index b7cc516a8a8a7..494d7c1ac7107 100644
--- a/Documentation/ABI/testing/sysfs-ocfs2
+++ b/Documentation/ABI/testing/sysfs-ocfs2
@@ -1,13 +1,13 @@
 What:		/sys/fs/ocfs2/
 Date:		April 2008
-Contact:	ocfs2-devel@oss.oracle.com
+Contact:	ocfs2-devel@lists.linux.dev
 Description:
 		The /sys/fs/ocfs2 directory contains knobs used by the
 		ocfs2-tools to interact with the filesystem.
 
 What:		/sys/fs/ocfs2/max_locking_protocol
 Date:		April 2008
-Contact:	ocfs2-devel@oss.oracle.com
+Contact:	ocfs2-devel@lists.linux.dev
 Description:
 		The /sys/fs/ocfs2/max_locking_protocol file displays version
 		of ocfs2 locking supported by the filesystem.  This version
@@ -28,7 +28,7 @@ Description:
 
 What:		/sys/fs/ocfs2/loaded_cluster_plugins
 Date:		April 2008
-Contact:	ocfs2-devel@oss.oracle.com
+Contact:	ocfs2-devel@lists.linux.dev
 Description:
 		The /sys/fs/ocfs2/loaded_cluster_plugins file describes
 		the available plugins to support ocfs2 cluster operation.
@@ -48,7 +48,7 @@ Description:
 
 What:		/sys/fs/ocfs2/active_cluster_plugin
 Date:		April 2008
-Contact:	ocfs2-devel@oss.oracle.com
+Contact:	ocfs2-devel@lists.linux.dev
 Description:
 		The /sys/fs/ocfs2/active_cluster_plugin displays which
 		cluster plugin is currently in use by the filesystem.
@@ -65,7 +65,7 @@ Description:
 
 What:		/sys/fs/ocfs2/cluster_stack
 Date:		April 2008
-Contact:	ocfs2-devel@oss.oracle.com
+Contact:	ocfs2-devel@lists.linux.dev
 Description:
 		The /sys/fs/ocfs2/cluster_stack file contains the name
 		of current ocfs2 cluster stack.  This value is set by
@@ -86,4 +86,4 @@ Description:
 		stack return an error.
 
 Users:
-	ocfs2-tools <ocfs2-tools-devel@oss.oracle.com>
+	ocfs2-tools <ocfs2-tools-devel@lists.linux.dev>
diff --git a/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv b/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv
index 1d97ad615c66c..a9d39d9e8865c 100644
--- a/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv
+++ b/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv
@@ -3,5 +3,7 @@ Date:		September 2022
 KernelVersion:	6.1
 Contact:	Armin Wolf <W_Armin@gmx.de>
 Description:
-		Reports the Dell ePPID (electronic Dell Piece Part Identification)
+		Reports the Dell ePPID (electronic Piece Part Identification)
 		of the ACPI battery.
+
+		See Documentation/wmi/devices/dell-wmi-ddv.rst for details.
diff --git a/Documentation/ABI/testing/sysfs-platform-hidma b/Documentation/ABI/testing/sysfs-platform-hidma
index fca40a54df597..a80aeda85ef61 100644
--- a/Documentation/ABI/testing/sysfs-platform-hidma
+++ b/Documentation/ABI/testing/sysfs-platform-hidma
@@ -2,7 +2,7 @@ What:		/sys/devices/platform/hidma-*/chid
 		/sys/devices/platform/QCOM8061:*/chid
 Date:		Dec 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Contact:	"Sinan Kaya <okaya@kernel.org>"
 Description:
 		Contains the ID of the channel within the HIDMA instance.
 		It is used to associate a given HIDMA channel with the
diff --git a/Documentation/ABI/testing/sysfs-platform-hidma-mgmt b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
index 3b6c5c9eabdc6..0373745b4e186 100644
--- a/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
+++ b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
@@ -2,7 +2,7 @@ What:		/sys/devices/platform/hidma-mgmt*/chanops/chan*/priority
 		/sys/devices/platform/QCOM8060:*/chanops/chan*/priority
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Contact:	"Sinan Kaya <okaya@kernel.org>"
 Description:
 		Contains either 0 or 1 and indicates if the DMA channel is a
 		low priority (0) or high priority (1) channel.
@@ -11,7 +11,7 @@ What:		/sys/devices/platform/hidma-mgmt*/chanops/chan*/weight
 		/sys/devices/platform/QCOM8060:*/chanops/chan*/weight
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Contact:	"Sinan Kaya <okaya@kernel.org>"
 Description:
 		Contains 0..15 and indicates the weight of the channel among
 		equal priority channels during round robin scheduling.
@@ -20,7 +20,7 @@ What:		/sys/devices/platform/hidma-mgmt*/chreset_timeout_cycles
 		/sys/devices/platform/QCOM8060:*/chreset_timeout_cycles
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Contact:	"Sinan Kaya <okaya@kernel.org>"
 Description:
 		Contains the platform specific cycle value to wait after a
 		reset command is issued. If the value is chosen too short,
@@ -32,7 +32,7 @@ What:		/sys/devices/platform/hidma-mgmt*/dma_channels
 		/sys/devices/platform/QCOM8060:*/dma_channels
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Contact:	"Sinan Kaya <okaya@kernel.org>"
 Description:
 		Contains the number of dma channels supported by one instance
 		of HIDMA hardware. The value may change from chip to chip.
@@ -41,7 +41,7 @@ What:		/sys/devices/platform/hidma-mgmt*/hw_version_major
 		/sys/devices/platform/QCOM8060:*/hw_version_major
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Contact:	"Sinan Kaya <okaya@kernel.org>"
 Description:
 		Version number major for the hardware.
 
@@ -49,7 +49,7 @@ What:		/sys/devices/platform/hidma-mgmt*/hw_version_minor
 		/sys/devices/platform/QCOM8060:*/hw_version_minor
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Contact:	"Sinan Kaya <okaya@kernel.org>"
 Description:
 		Version number minor for the hardware.
 
@@ -57,7 +57,7 @@ What:		/sys/devices/platform/hidma-mgmt*/max_rd_xactions
 		/sys/devices/platform/QCOM8060:*/max_rd_xactions
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Contact:	"Sinan Kaya <okaya@kernel.org>"
 Description:
 		Contains a value between 0 and 31. Maximum number of
 		read transactions that can be issued back to back.
@@ -69,7 +69,7 @@ What:		/sys/devices/platform/hidma-mgmt*/max_read_request
 		/sys/devices/platform/QCOM8060:*/max_read_request
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Contact:	"Sinan Kaya <okaya@kernel.org>"
 Description:
 		Size of each read request. The value needs to be a power
 		of two and can be between 128 and 1024.
@@ -78,7 +78,7 @@ What:		/sys/devices/platform/hidma-mgmt*/max_wr_xactions
 		/sys/devices/platform/QCOM8060:*/max_wr_xactions
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Contact:	"Sinan Kaya <okaya@kernel.org>"
 Description:
 		Contains a value between 0 and 31. Maximum number of
 		write transactions that can be issued back to back.
@@ -91,7 +91,7 @@ What:		/sys/devices/platform/hidma-mgmt*/max_write_request
 		/sys/devices/platform/QCOM8060:*/max_write_request
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@codeaurora.org>"
+Contact:	"Sinan Kaya <okaya@kernel.org>"
 Description:
 		Size of each write request. The value needs to be a power
 		of two and can be between 128 and 1024.
diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
index 9b99a81babb1c..4c5c02d8f870e 100644
--- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
+++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
@@ -75,3 +75,12 @@ KernelVersion:	6.4
 Contact:	"Liming Sun <limings@nvidia.com>"
 Description:
 		The file used to access the BlueField boot fifo.
+
+What:		/sys/bus/platform/devices/MLNXBF04:00/rsh_log
+Date:		May 2023
+KernelVersion:	6.4
+Contact:	"Liming Sun <limings@nvidia.com>"
+Description:
+		The file used to write BlueField boot log with the format
+                "[INFO|WARN|ERR|ASSERT ]<msg>". Log level 'INFO' is used by
+                default if not specified.
diff --git a/Documentation/PCI/endpoint/pci-ntb-howto.rst b/Documentation/PCI/endpoint/pci-ntb-howto.rst
index 1884bf29caba4..4261e7157ef1c 100644
--- a/Documentation/PCI/endpoint/pci-ntb-howto.rst
+++ b/Documentation/PCI/endpoint/pci-ntb-howto.rst
@@ -88,13 +88,10 @@ commands can be used::
 	# echo 0x104c > functions/pci_epf_ntb/func1/vendorid
 	# echo 0xb00d > functions/pci_epf_ntb/func1/deviceid
 
-In order to configure NTB specific attributes, a new sub-directory to func1
-should be created::
-
-	# mkdir functions/pci_epf_ntb/func1/pci_epf_ntb.0/
-
-The NTB function driver will populate this directory with various attributes
-that can be configured by the user::
+The PCI endpoint framework also automatically creates a sub-directory in the
+function attribute directory. This sub-directory has the same name as the name
+of the function device and is populated with the following NTB specific
+attributes that can be configured by the user::
 
 	# ls functions/pci_epf_ntb/func1/pci_epf_ntb.0/
 	db_count    mw1         mw2         mw3         mw4         num_mws
diff --git a/Documentation/PCI/endpoint/pci-vntb-howto.rst b/Documentation/PCI/endpoint/pci-vntb-howto.rst
index 4ab8e4a26d4be..70d3bc90893f3 100644
--- a/Documentation/PCI/endpoint/pci-vntb-howto.rst
+++ b/Documentation/PCI/endpoint/pci-vntb-howto.rst
@@ -84,13 +84,10 @@ commands can be used::
 	# echo 0x1957 > functions/pci_epf_vntb/func1/vendorid
 	# echo 0x0809 > functions/pci_epf_vntb/func1/deviceid
 
-In order to configure NTB specific attributes, a new sub-directory to func1
-should be created::
-
-	# mkdir functions/pci_epf_vntb/func1/pci_epf_vntb.0/
-
-The NTB function driver will populate this directory with various attributes
-that can be configured by the user::
+The PCI endpoint framework also automatically creates a sub-directory in the
+function attribute directory. This sub-directory has the same name as the name
+of the function device and is populated with the following NTB specific
+attributes that can be configured by the user::
 
 	# ls functions/pci_epf_vntb/func1/pci_epf_vntb.0/
 	db_count    mw1         mw2         mw3         mw4         num_mws
@@ -103,7 +100,7 @@ A sample configuration for NTB function is given below::
 	# echo 1 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/num_mws
 	# echo 0x100000 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/mw1
 
-A sample configuration for virtual NTB driver for virutal PCI bus::
+A sample configuration for virtual NTB driver for virtual PCI bus::
 
 	# echo 0x1957 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_vid
 	# echo 0x080A > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_pid
diff --git a/Documentation/PCI/msi-howto.rst b/Documentation/PCI/msi-howto.rst
index 8ae461e97c54e..c9400f02333bf 100644
--- a/Documentation/PCI/msi-howto.rst
+++ b/Documentation/PCI/msi-howto.rst
@@ -290,7 +290,7 @@ PCI_IRQ_MSI or PCI_IRQ_MSIX flags.
 List of device drivers MSI(-X) APIs
 ===================================
 
-The PCI/MSI subystem has a dedicated C file for its exported device driver
+The PCI/MSI subsystem has a dedicated C file for its exported device driver
 APIs — `drivers/pci/msi/api.c`. The following functions are exported:
 
 .. kernel-doc:: drivers/pci/msi/api.c
diff --git a/Documentation/PCI/pci-error-recovery.rst b/Documentation/PCI/pci-error-recovery.rst
index 9981d330da8f0..c237596f67e39 100644
--- a/Documentation/PCI/pci-error-recovery.rst
+++ b/Documentation/PCI/pci-error-recovery.rst
@@ -364,7 +364,7 @@ Note, however, not all failures are truly "permanent". Some are
 caused by over-heating, some by a poorly seated card. Many
 PCI error events are caused by software bugs, e.g. DMA's to
 wild addresses or bogus split transactions due to programming
-errors. See the discussion in powerpc/eeh-pci-error-recovery.txt
+errors. See the discussion in Documentation/powerpc/eeh-pci-error-recovery.rst
 for additional detail on real-life experience of the causes of
 software errors.
 
diff --git a/Documentation/PCI/pcieaer-howto.rst b/Documentation/PCI/pcieaer-howto.rst
index 0b36b9ebfa4b4..e00d63971695e 100644
--- a/Documentation/PCI/pcieaer-howto.rst
+++ b/Documentation/PCI/pcieaer-howto.rst
@@ -16,62 +16,61 @@ Overview
 About this guide
 ----------------
 
-This guide describes the basics of the PCI Express Advanced Error
+This guide describes the basics of the PCI Express (PCIe) Advanced Error
 Reporting (AER) driver and provides information on how to use it, as
-well as how to enable the drivers of endpoint devices to conform with
-PCI Express AER driver.
+well as how to enable the drivers of Endpoint devices to conform with
+the PCIe AER driver.
 
 
-What is the PCI Express AER Driver?
------------------------------------
+What is the PCIe AER Driver?
+----------------------------
 
-PCI Express error signaling can occur on the PCI Express link itself
-or on behalf of transactions initiated on the link. PCI Express
+PCIe error signaling can occur on the PCIe link itself
+or on behalf of transactions initiated on the link. PCIe
 defines two error reporting paradigms: the baseline capability and
 the Advanced Error Reporting capability. The baseline capability is
-required of all PCI Express components providing a minimum defined
+required of all PCIe components providing a minimum defined
 set of error reporting requirements. Advanced Error Reporting
-capability is implemented with a PCI Express advanced error reporting
+capability is implemented with a PCIe Advanced Error Reporting
 extended capability structure providing more robust error reporting.
 
-The PCI Express AER driver provides the infrastructure to support PCI
-Express Advanced Error Reporting capability. The PCI Express AER
-driver provides three basic functions:
+The PCIe AER driver provides the infrastructure to support PCIe Advanced
+Error Reporting capability. The PCIe AER driver provides three basic
+functions:
 
   - Gathers the comprehensive error information if errors occurred.
   - Reports error to the users.
   - Performs error recovery actions.
 
-AER driver only attaches root ports which support PCI-Express AER
-capability.
+The AER driver only attaches to Root Ports and RCECs that support the PCIe
+AER capability.
 
 
 User Guide
 ==========
 
-Include the PCI Express AER Root Driver into the Linux Kernel
--------------------------------------------------------------
+Include the PCIe AER Root Driver into the Linux Kernel
+------------------------------------------------------
 
-The PCI Express AER Root driver is a Root Port service driver attached
-to the PCI Express Port Bus driver. If a user wants to use it, the driver
-has to be compiled. Option CONFIG_PCIEAER supports this capability. It
-depends on CONFIG_PCIEPORTBUS, so pls. set CONFIG_PCIEPORTBUS=y and
-CONFIG_PCIEAER = y.
+The PCIe AER driver is a Root Port service driver attached
+via the PCIe Port Bus driver. If a user wants to use it, the driver
+must be compiled. It is enabled with CONFIG_PCIEAER, which
+depends on CONFIG_PCIEPORTBUS.
 
-Load PCI Express AER Root Driver
---------------------------------
+Load PCIe AER Root Driver
+-------------------------
 
 Some systems have AER support in firmware. Enabling Linux AER support at
-the same time the firmware handles AER may result in unpredictable
+the same time the firmware handles AER would result in unpredictable
 behavior. Therefore, Linux does not handle AER events unless the firmware
-grants AER control to the OS via the ACPI _OSC method. See the PCI FW 3.0
+grants AER control to the OS via the ACPI _OSC method. See the PCI Firmware
 Specification for details regarding _OSC usage.
 
 AER error output
 ----------------
 
 When a PCIe AER error is captured, an error message will be output to
-console. If it's a correctable error, it is output as a warning.
+console. If it's a correctable error, it is output as an info message.
 Otherwise, it is printed as an error. So users could choose different
 log level to filter out correctable error messages.
 
@@ -82,9 +81,9 @@ Below shows an example::
   0000:50:00.0:    [20] Unsupported Request    (First)
   0000:50:00.0:   TLP Header: 04000001 00200a03 05010000 00050100
 
-In the example, 'Requester ID' means the ID of the device who sends
-the error message to root port. Pls. refer to pci express specs for
-other fields.
+In the example, 'Requester ID' means the ID of the device that sent
+the error message to the Root Port. Please refer to PCIe specs for other
+fields.
 
 AER Statistics / Counters
 -------------------------
@@ -96,65 +95,56 @@ Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
 Developer Guide
 ===============
 
-To enable AER aware support requires a software driver to configure
-the AER capability structure within its device and to provide callbacks.
+To enable error recovery, a software driver must provide callbacks.
 
-To support AER better, developers need understand how AER does work
-firstly.
+To support AER better, developers need to understand how AER works.
 
-PCI Express errors are classified into two types: correctable errors
-and uncorrectable errors. This classification is based on the impacts
+PCIe errors are classified into two types: correctable errors
+and uncorrectable errors. This classification is based on the impact
 of those errors, which may result in degraded performance or function
 failure.
 
 Correctable errors pose no impacts on the functionality of the
-interface. The PCI Express protocol can recover without any software
+interface. The PCIe protocol can recover without any software
 intervention or any loss of data. These errors are detected and
-corrected by hardware. Unlike correctable errors, uncorrectable
+corrected by hardware.
+
+Unlike correctable errors, uncorrectable
 errors impact functionality of the interface. Uncorrectable errors
-can cause a particular transaction or a particular PCI Express link
+can cause a particular transaction or a particular PCIe link
 to be unreliable. Depending on those error conditions, uncorrectable
 errors are further classified into non-fatal errors and fatal errors.
 Non-fatal errors cause the particular transaction to be unreliable,
-but the PCI Express link itself is fully functional. Fatal errors, on
+but the PCIe link itself is fully functional. Fatal errors, on
 the other hand, cause the link to be unreliable.
 
-When AER is enabled, a PCI Express device will automatically send an
-error message to the PCIe root port above it when the device captures
+When PCIe error reporting is enabled, a device will automatically send an
+error message to the Root Port above it when it captures
 an error. The Root Port, upon receiving an error reporting message,
-internally processes and logs the error message in its PCI Express
-capability structure. Error information being logged includes storing
+internally processes and logs the error message in its AER
+Capability structure. Error information being logged includes storing
 the error reporting agent's requestor ID into the Error Source
 Identification Registers and setting the error bits of the Root Error
-Status Register accordingly. If AER error reporting is enabled in Root
-Error Command Register, the Root Port generates an interrupt if an
+Status Register accordingly. If AER error reporting is enabled in the Root
+Error Command Register, the Root Port generates an interrupt when an
 error is detected.
 
-Note that the errors as described above are related to the PCI Express
+Note that the errors as described above are related to the PCIe
 hierarchy and links. These errors do not include any device specific
 errors because device specific errors will still get sent directly to
 the device driver.
 
-Configure the AER capability structure
---------------------------------------
-
-AER aware drivers of PCI Express component need change the device
-control registers to enable AER. They also could change AER registers,
-including mask and severity registers. Helper function
-pci_enable_pcie_error_reporting could be used to enable AER. See
-section 3.3.
-
 Provide callbacks
 -----------------
 
-callback reset_link to reset pci express link
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+callback reset_link to reset PCIe link
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-This callback is used to reset the pci express physical link when a
-fatal error happens. The root port aer service driver provides a
-default reset_link function, but different upstream ports might
-have different specifications to reset pci express link, so all
-upstream ports should provide their own reset_link functions.
+This callback is used to reset the PCIe physical link when a
+fatal error happens. The Root Port AER service driver provides a
+default reset_link function, but different Upstream Ports might
+have different specifications to reset the PCIe link, so
+Upstream Port drivers may provide their own reset_link functions.
 
 Section 3.2.2.2 provides more detailed info on when to call
 reset_link.
@@ -162,24 +152,24 @@ reset_link.
 PCI error-recovery callbacks
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-The PCI Express AER Root driver uses error callbacks to coordinate
+The PCIe AER Root driver uses error callbacks to coordinate
 with downstream device drivers associated with a hierarchy in question
 when performing error recovery actions.
 
 Data struct pci_driver has a pointer, err_handler, to point to
 pci_error_handlers who consists of a couple of callback function
-pointers. AER driver follows the rules defined in
-pci-error-recovery.txt except pci express specific parts (e.g.
-reset_link). Pls. refer to pci-error-recovery.txt for detailed
+pointers. The AER driver follows the rules defined in
+pci-error-recovery.rst except PCIe-specific parts (e.g.
+reset_link). Please refer to pci-error-recovery.rst for detailed
 definitions of the callbacks.
 
-Below sections specify when to call the error callback functions.
+The sections below specify when to call the error callback functions.
 
 Correctable errors
 ~~~~~~~~~~~~~~~~~~
 
 Correctable errors pose no impacts on the functionality of
-the interface. The PCI Express protocol can recover without any
+the interface. The PCIe protocol can recover without any
 software intervention or any loss of data. These errors do not
 require any recovery actions. The AER driver clears the device's
 correctable error status register accordingly and logs these errors.
@@ -190,12 +180,12 @@ Non-correctable (non-fatal and fatal) errors
 If an error message indicates a non-fatal error, performing link reset
 at upstream is not required. The AER driver calls error_detected(dev,
 pci_channel_io_normal) to all drivers associated within a hierarchy in
-question. for example::
+question. For example::
 
-  EndPoint<==>DownstreamPort B<==>UpstreamPort A<==>RootPort
+  Endpoint <==> Downstream Port B <==> Upstream Port A <==> Root Port
 
-If Upstream port A captures an AER error, the hierarchy consists of
-Downstream port B and EndPoint.
+If Upstream Port A captures an AER error, the hierarchy consists of
+Downstream Port B and Endpoint.
 
 A driver may return PCI_ERS_RESULT_CAN_RECOVER,
 PCI_ERS_RESULT_DISCONNECT, or PCI_ERS_RESULT_NEED_RESET, depending on
@@ -212,36 +202,11 @@ to reset the link. If error_detected returns PCI_ERS_RESULT_CAN_RECOVER
 and reset_link returns PCI_ERS_RESULT_RECOVERED, the error handling goes
 to mmio_enabled.
 
-helper functions
-----------------
-::
-
-  int pci_enable_pcie_error_reporting(struct pci_dev *dev);
-
-pci_enable_pcie_error_reporting enables the device to send error
-messages to root port when an error is detected. Note that devices
-don't enable the error reporting by default, so device drivers need
-call this function to enable it.
-
-::
-
-  int pci_disable_pcie_error_reporting(struct pci_dev *dev);
-
-pci_disable_pcie_error_reporting disables the device to send error
-messages to root port when an error is detected.
-
-::
-
-  int pci_aer_clear_nonfatal_status(struct pci_dev *dev);`
-
-pci_aer_clear_nonfatal_status clears non-fatal errors in the uncorrectable
-error status register.
-
 Frequent Asked Questions
 ------------------------
 
 Q:
-  What happens if a PCI Express device driver does not provide an
+  What happens if a PCIe device driver does not provide an
   error recovery handler (pci_driver->err_handler is equal to NULL)?
 
 A:
@@ -257,24 +222,6 @@ A:
   Fatal error recovery will fail if the errors are reported by the
   upstream ports who are attached by the service driver.
 
-Q:
-  How does this infrastructure deal with driver that is not PCI
-  Express aware?
-
-A:
-  This infrastructure calls the error callback functions of the
-  driver when an error happens. But if the driver is not aware of
-  PCI Express, the device might not report its own errors to root
-  port.
-
-Q:
-  What modifications will that driver need to make it compatible
-  with the PCI Express AER Root driver?
-
-A:
-  It could call the helper functions to enable AER in devices and
-  cleanup uncorrectable status register. Pls. refer to section 3.3.
-
 
 Software error injection
 ========================
@@ -296,5 +243,5 @@ from:
 
     https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/
 
-More information about aer-inject can be found in the document comes
-with its source code.
+More information about aer-inject can be found in the document in
+its source code.
diff --git a/Documentation/RCU/Design/Requirements/Requirements.rst b/Documentation/RCU/Design/Requirements/Requirements.rst
index 49387d8236196..f3b605285a871 100644
--- a/Documentation/RCU/Design/Requirements/Requirements.rst
+++ b/Documentation/RCU/Design/Requirements/Requirements.rst
@@ -2071,41 +2071,7 @@ call.
 
 Because RCU avoids interrupting idle CPUs, it is illegal to execute an
 RCU read-side critical section on an idle CPU. (Kernels built with
-``CONFIG_PROVE_RCU=y`` will splat if you try it.) The RCU_NONIDLE()
-macro and ``_rcuidle`` event tracing is provided to work around this
-restriction. In addition, rcu_is_watching() may be used to test
-whether or not it is currently legal to run RCU read-side critical
-sections on this CPU. I learned of the need for diagnostics on the one
-hand and RCU_NONIDLE() on the other while inspecting idle-loop code.
-Steven Rostedt supplied ``_rcuidle`` event tracing, which is used quite
-heavily in the idle loop. However, there are some restrictions on the
-code placed within RCU_NONIDLE():
-
-#. Blocking is prohibited. In practice, this is not a serious
-   restriction given that idle tasks are prohibited from blocking to
-   begin with.
-#. Although nesting RCU_NONIDLE() is permitted, they cannot nest
-   indefinitely deeply. However, given that they can be nested on the
-   order of a million deep, even on 32-bit systems, this should not be a
-   serious restriction. This nesting limit would probably be reached
-   long after the compiler OOMed or the stack overflowed.
-#. Any code path that enters RCU_NONIDLE() must sequence out of that
-   same RCU_NONIDLE(). For example, the following is grossly
-   illegal:
-
-      ::
-
-	  1     RCU_NONIDLE({
-	  2       do_something();
-	  3       goto bad_idea;  /* BUG!!! */
-	  4       do_something_else();});
-	  5   bad_idea:
-
-
-   It is just as illegal to transfer control into the middle of
-   RCU_NONIDLE()'s argument. Yes, in theory, you could transfer in
-   as long as you also transferred out, but in practice you could also
-   expect to get sharply worded review comments.
+``CONFIG_PROVE_RCU=y`` will splat if you try it.)
 
 It is similarly socially unacceptable to interrupt an ``nohz_full`` CPU
 running in userspace. RCU must therefore track ``nohz_full`` userspace
diff --git a/Documentation/RCU/whatisRCU.rst b/Documentation/RCU/whatisRCU.rst
index 8eddef28d3a11..e488c8e557a9c 100644
--- a/Documentation/RCU/whatisRCU.rst
+++ b/Documentation/RCU/whatisRCU.rst
@@ -1117,7 +1117,6 @@ All: lockdep-checked RCU utility APIs::
 
 	RCU_LOCKDEP_WARN
 	rcu_sleep_check
-	RCU_NONIDLE
 
 All: Unchecked RCU-protected pointer access::
 
diff --git a/Documentation/admin-guide/acpi/ssdt-overlays.rst b/Documentation/admin-guide/acpi/ssdt-overlays.rst
index b5fbf54dca19b..5ea9f4a3b76e3 100644
--- a/Documentation/admin-guide/acpi/ssdt-overlays.rst
+++ b/Documentation/admin-guide/acpi/ssdt-overlays.rst
@@ -103,7 +103,7 @@ allows a persistent, OS independent way of storing the user defined SSDTs. There
 is also work underway to implement EFI support for loading user defined SSDTs
 and using this method will make it easier to convert to the EFI loading
 mechanism when that will arrive. To enable it, the
-CONFIG_EFI_CUSTOM_SSDT_OVERLAYS shoyld be chosen to y.
+CONFIG_EFI_CUSTOM_SSDT_OVERLAYS should be chosen to y.
 
 In order to load SSDTs from an EFI variable the ``"efivar_ssdt=..."`` kernel
 command line parameter can be used (the name has a limitation of 16 characters).
diff --git a/Documentation/admin-guide/bcache.rst b/Documentation/admin-guide/bcache.rst
index bb5032a992347..6fdb495ac4665 100644
--- a/Documentation/admin-guide/bcache.rst
+++ b/Documentation/admin-guide/bcache.rst
@@ -508,9 +508,6 @@ cache_miss_collisions
   cache miss, but raced with a write and data was already present (usually 0
   since the synchronization for cache misses was rewritten)
 
-cache_readaheads
-  Count of times readahead occurred.
-
 Sysfs - cache set
 ~~~~~~~~~~~~~~~~~
 
diff --git a/Documentation/admin-guide/cgroup-v1/memory.rst b/Documentation/admin-guide/cgroup-v1/memory.rst
index 47d1d7d932a82..fabaad3fd9c21 100644
--- a/Documentation/admin-guide/cgroup-v1/memory.rst
+++ b/Documentation/admin-guide/cgroup-v1/memory.rst
@@ -297,7 +297,7 @@ Lock order is as follows::
 
   Page lock (PG_locked bit of page->flags)
     mm->page_table_lock or split pte_lock
-      lock_page_memcg (memcg->move_lock)
+      folio_memcg_lock (memcg->move_lock)
         mapping->i_pages lock
           lruvec->lru_lock.
 
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
index e592a93644739..4ef8901911961 100644
--- a/Documentation/admin-guide/cgroup-v2.rst
+++ b/Documentation/admin-guide/cgroup-v2.rst
@@ -1580,6 +1580,13 @@ PAGE_SIZE multiple when read back.
 
 	Healthy workloads are not expected to reach this limit.
 
+  memory.swap.peak
+	A read-only single value file which exists on non-root
+	cgroups.
+
+	The max swap usage recorded for the cgroup and its
+	descendants since the creation of the cgroup.
+
   memory.swap.max
 	A read-write single value file which exists on non-root
 	cgroups.  The default is "max".
@@ -2022,31 +2029,33 @@ that attribute:
   no-change
 	Do not modify the I/O priority class.
 
-  none-to-rt
-	For requests that do not have an I/O priority class (NONE),
-	change the I/O priority class into RT. Do not modify
-	the I/O priority class of other requests.
+  promote-to-rt
+	For requests that have a non-RT I/O priority class, change it into RT.
+	Also change the priority level of these requests to 4. Do not modify
+	the I/O priority of requests that have priority class RT.
 
   restrict-to-be
 	For requests that do not have an I/O priority class or that have I/O
-	priority class RT, change it into BE. Do not modify the I/O priority
-	class of requests that have priority class IDLE.
+	priority class RT, change it into BE. Also change the priority level
+	of these requests to 0. Do not modify the I/O priority class of
+	requests that have priority class IDLE.
 
   idle
 	Change the I/O priority class of all requests into IDLE, the lowest
 	I/O priority class.
 
+  none-to-rt
+	Deprecated. Just an alias for promote-to-rt.
+
 The following numerical values are associated with the I/O priority policies:
 
-+-------------+---+
-| no-change   | 0 |
-+-------------+---+
-| none-to-rt  | 1 |
-+-------------+---+
-| rt-to-be    | 2 |
-+-------------+---+
-| all-to-idle | 3 |
-+-------------+---+
++----------------+---+
+| no-change      | 0 |
++----------------+---+
+| rt-to-be       | 2 |
++----------------+---+
+| all-to-idle    | 3 |
++----------------+---+
 
 The numerical value that corresponds to each I/O priority class is as follows:
 
@@ -2062,9 +2071,13 @@ The numerical value that corresponds to each I/O priority class is as follows:
 
 The algorithm to set the I/O priority class for a request is as follows:
 
-- Translate the I/O priority class policy into a number.
-- Change the request I/O priority class into the maximum of the I/O priority
-  class policy number and the numerical I/O priority class.
+- If I/O priority class policy is promote-to-rt, change the request I/O
+  priority class to IOPRIO_CLASS_RT and change the request I/O priority
+  level to 4.
+- If I/O priorityt class is not promote-to-rt, translate the I/O priority
+  class policy into a number, then change the request I/O priority class
+  into the maximum of the I/O priority class policy number and the numerical
+  I/O priority class.
 
 PID
 ---
@@ -2437,7 +2450,7 @@ Miscellaneous controller provides 3 interface files. If two misc resources (res_
 	  res_b 10
 
   misc.current
-        A read-only flat-keyed file shown in the non-root cgroups.  It shows
+        A read-only flat-keyed file shown in the all cgroups.  It shows
         the current usage of the resources in the cgroup and its children.::
 
 	  $ cat misc.current
diff --git a/Documentation/admin-guide/device-mapper/dm-flakey.rst b/Documentation/admin-guide/device-mapper/dm-flakey.rst
index f7104c01b0f74..f967c5fea219b 100644
--- a/Documentation/admin-guide/device-mapper/dm-flakey.rst
+++ b/Documentation/admin-guide/device-mapper/dm-flakey.rst
@@ -67,6 +67,16 @@ Optional feature parameters:
 	Perform the replacement only if bio->bi_opf has all the
 	selected flags set.
 
+  random_read_corrupt <probability>
+	During <down interval>, replace random byte in a read bio
+	with a random value. probability is an integer between
+	0 and 1000000000 meaning 0% to 100% probability of corruption.
+
+  random_write_corrupt <probability>
+	During <down interval>, replace random byte in a write bio
+	with a random value. probability is an integer between
+	0 and 1000000000 meaning 0% to 100% probability of corruption.
+
 Examples:
 
 Replaces the 32nd byte of READ bios with the value 1::
diff --git a/Documentation/admin-guide/device-mapper/dm-integrity.rst b/Documentation/admin-guide/device-mapper/dm-integrity.rst
index 8db172efa2729..d8a5f14d0e3c4 100644
--- a/Documentation/admin-guide/device-mapper/dm-integrity.rst
+++ b/Documentation/admin-guide/device-mapper/dm-integrity.rst
@@ -25,7 +25,7 @@ mode it calculates and verifies the integrity tag internally. In this
 mode, the dm-integrity target can be used to detect silent data
 corruption on the disk or in the I/O path.
 
-There's an alternate mode of operation where dm-integrity uses bitmap
+There's an alternate mode of operation where dm-integrity uses a bitmap
 instead of a journal. If a bit in the bitmap is 1, the corresponding
 region's data and integrity tags are not synchronized - if the machine
 crashes, the unsynchronized regions will be recalculated. The bitmap mode
@@ -38,6 +38,15 @@ the device. But it will only format the device if the superblock contains
 zeroes. If the superblock is neither valid nor zeroed, the dm-integrity
 target can't be loaded.
 
+Accesses to the on-disk metadata area containing checksums (aka tags) are
+buffered using dm-bufio. When an access to any given metadata area
+occurs, each unique metadata area gets its own buffer(s). The buffer size
+is capped at the size of the metadata area, but may be smaller, thereby
+requiring multiple buffers to represent the full metadata area. A smaller
+buffer size will produce a smaller resulting read/write operation to the
+metadata area for small reads/writes. The metadata is still read even in
+a full write to the data covered by a single buffer.
+
 To use the target for the first time:
 
 1. overwrite the superblock with zeroes
@@ -93,7 +102,7 @@ journal_sectors:number
 	device. If the device is already formatted, the value from the
 	superblock is used.
 
-interleave_sectors:number
+interleave_sectors:number (default 32768)
 	The number of interleaved sectors. This values is rounded down to
 	a power of two. If the device is already formatted, the value from
 	the superblock is used.
@@ -102,20 +111,16 @@ meta_device:device
 	Don't interleave the data and metadata on the device. Use a
 	separate device for metadata.
 
-buffer_sectors:number
-	The number of sectors in one buffer. The value is rounded down to
-	a power of two.
-
-	The tag area is accessed using buffers, the buffer size is
-	configurable. The large buffer size means that the I/O size will
-	be larger, but there could be less I/Os issued.
+buffer_sectors:number (default 128)
+	The number of sectors in one metadata buffer. The value is rounded
+	down to a power of two.
 
-journal_watermark:number
+journal_watermark:number (default 50)
 	The journal watermark in percents. When the size of the journal
 	exceeds this watermark, the thread that flushes the journal will
 	be started.
 
-commit_time:number
+commit_time:number (default 10000)
 	Commit time in milliseconds. When this time passes, the journal is
 	written. The journal is also written immediately if the FLUSH
 	request is received.
@@ -163,11 +168,10 @@ journal_mac:algorithm(:key)	(the key is optional)
 	the journal. Thus, modified sector number would be detected at
 	this stage.
 
-block_size:number
-	The size of a data block in bytes.  The larger the block size the
+block_size:number (default 512)
+	The size of a data block in bytes. The larger the block size the
 	less overhead there is for per-block integrity metadata.
-	Supported values are 512, 1024, 2048 and 4096 bytes.  If not
-	specified the default block size is 512 bytes.
+	Supported values are 512, 1024, 2048 and 4096 bytes.
 
 sectors_per_bit:number
 	In the bitmap mode, this parameter specifies the number of
@@ -209,6 +213,12 @@ table and swap the tables with suspend and resume). The other arguments
 should not be changed when reloading the target because the layout of disk
 data depend on them and the reloaded target would be non-functional.
 
+For example, on a device using the default interleave_sectors of 32768, a
+block_size of 512, and an internal_hash of crc32c with a tag size of 4
+bytes, it will take 128 KiB of tags to track a full data area, requiring
+256 sectors of metadata per data area. With the default buffer_sectors of
+128, that means there will be 2 buffers per metadata area, or 2 buffers
+per 16 MiB of data.
 
 Status line:
 
@@ -286,7 +296,8 @@ The layout of the formatted block device:
     Each run contains:
 
 	* tag area - it contains integrity tags. There is one tag for each
-	  sector in the data area
+	  sector in the data area. The size of this area is always 4KiB or
+	  greater.
 	* data area - it contains data sectors. The number of data sectors
 	  in one run must be a power of two. log2 of this value is stored
 	  in the superblock.
diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
index 06c525e01ea5a..b1b57f638b94f 100644
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@@ -2691,7 +2691,7 @@
 		 45 = /dev/ttyMM1		Marvell MPSC - port 1 (obsolete unused)
 		 46 = /dev/ttyCPM0		PPC CPM (SCC or SMC) - port 0
 		    ...
-		 47 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 5
+		 49 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 3
 		 50 = /dev/ttyIOC0		Altix serial card
 		    ...
 		 81 = /dev/ttyIOC31		Altix serial card
diff --git a/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst b/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
new file mode 100644
index 0000000000000..264bfa937f7de
--- /dev/null
+++ b/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
@@ -0,0 +1,109 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+GDS - Gather Data Sampling
+==========================
+
+Gather Data Sampling is a hardware vulnerability which allows unprivileged
+speculative access to data which was previously stored in vector registers.
+
+Problem
+-------
+When a gather instruction performs loads from memory, different data elements
+are merged into the destination vector register. However, when a gather
+instruction that is transiently executed encounters a fault, stale data from
+architectural or internal vector registers may get transiently forwarded to the
+destination vector register instead. This will allow a malicious attacker to
+infer stale data using typical side channel techniques like cache timing
+attacks. GDS is a purely sampling-based attack.
+
+The attacker uses gather instructions to infer the stale vector register data.
+The victim does not need to do anything special other than use the vector
+registers. The victim does not need to use gather instructions to be
+vulnerable.
+
+Because the buffers are shared between Hyper-Threads cross Hyper-Thread attacks
+are possible.
+
+Attack scenarios
+----------------
+Without mitigation, GDS can infer stale data across virtually all
+permission boundaries:
+
+	Non-enclaves can infer SGX enclave data
+	Userspace can infer kernel data
+	Guests can infer data from hosts
+	Guest can infer guest from other guests
+	Users can infer data from other users
+
+Because of this, it is important to ensure that the mitigation stays enabled in
+lower-privilege contexts like guests and when running outside SGX enclaves.
+
+The hardware enforces the mitigation for SGX. Likewise, VMMs should  ensure
+that guests are not allowed to disable the GDS mitigation. If a host erred and
+allowed this, a guest could theoretically disable GDS mitigation, mount an
+attack, and re-enable it.
+
+Mitigation mechanism
+--------------------
+This issue is mitigated in microcode. The microcode defines the following new
+bits:
+
+ ================================   ===   ============================
+ IA32_ARCH_CAPABILITIES[GDS_CTRL]   R/O   Enumerates GDS vulnerability
+                                          and mitigation support.
+ IA32_ARCH_CAPABILITIES[GDS_NO]     R/O   Processor is not vulnerable.
+ IA32_MCU_OPT_CTRL[GDS_MITG_DIS]    R/W   Disables the mitigation
+                                          0 by default.
+ IA32_MCU_OPT_CTRL[GDS_MITG_LOCK]   R/W   Locks GDS_MITG_DIS=0. Writes
+                                          to GDS_MITG_DIS are ignored
+                                          Can't be cleared once set.
+ ================================   ===   ============================
+
+GDS can also be mitigated on systems that don't have updated microcode by
+disabling AVX. This can be done by setting gather_data_sampling="force" or
+"clearcpuid=avx" on the kernel command-line.
+
+If used, these options will disable AVX use by turning off XSAVE YMM support.
+However, the processor will still enumerate AVX support.  Userspace that
+does not follow proper AVX enumeration to check both AVX *and* XSAVE YMM
+support will break.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The mitigation can be disabled by setting "gather_data_sampling=off" or
+"mitigations=off" on the kernel command line. Not specifying either will default
+to the mitigation being enabled. Specifying "gather_data_sampling=force" will
+use the microcode mitigation when available or disable AVX on affected systems
+where the microcode hasn't been updated to include the mitigation.
+
+GDS System Information
+------------------------
+The kernel provides vulnerability status information through sysfs. For
+GDS this can be accessed by the following sysfs file:
+
+/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+
+The possible values contained in this file are:
+
+ ============================== =============================================
+ Not affected                   Processor not vulnerable.
+ Vulnerable                     Processor vulnerable and mitigation disabled.
+ Vulnerable: No microcode       Processor vulnerable and microcode is missing
+                                mitigation.
+ Mitigation: AVX disabled,
+ no microcode                   Processor is vulnerable and microcode is missing
+                                mitigation. AVX disabled as mitigation.
+ Mitigation: Microcode          Processor is vulnerable and mitigation is in
+                                effect.
+ Mitigation: Microcode (locked) Processor is vulnerable and mitigation is in
+                                effect and cannot be disabled.
+ Unknown: Dependent on
+ hypervisor status              Running on a virtual guest processor that is
+                                affected but with no way to know if host
+                                processor is mitigated or vulnerable.
+ ============================== =============================================
+
+GDS Default mitigation
+----------------------
+The updated microcode will enable the mitigation by default. The kernel's
+default action is to leave the mitigation enabled.
diff --git a/Documentation/admin-guide/hw-vuln/index.rst b/Documentation/admin-guide/hw-vuln/index.rst
index e0614760a99e7..de99caabf65a3 100644
--- a/Documentation/admin-guide/hw-vuln/index.rst
+++ b/Documentation/admin-guide/hw-vuln/index.rst
@@ -13,9 +13,11 @@ are configurable at compile, boot or run time.
    l1tf
    mds
    tsx_async_abort
-   multihit.rst
-   special-register-buffer-data-sampling.rst
-   core-scheduling.rst
-   l1d_flush.rst
-   processor_mmio_stale_data.rst
-   cross-thread-rsb.rst
+   multihit
+   special-register-buffer-data-sampling
+   core-scheduling
+   l1d_flush
+   processor_mmio_stale_data
+   cross-thread-rsb
+   srso
+   gather_data_sampling
diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst
index 4d186f599d90f..32a8893e56177 100644
--- a/Documentation/admin-guide/hw-vuln/spectre.rst
+++ b/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -484,11 +484,14 @@ Spectre variant 2
 
    Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
    boot, by setting the IBRS bit, and they're automatically protected against
-   Spectre v2 variant attacks, including cross-thread branch target injections
-   on SMT systems (STIBP). In other words, eIBRS enables STIBP too.
+   Spectre v2 variant attacks.
 
-   Legacy IBRS systems clear the IBRS bit on exit to userspace and
-   therefore explicitly enable STIBP for that
+   On Intel's enhanced IBRS systems, this includes cross-thread branch target
+   injections on SMT systems (STIBP). In other words, Intel eIBRS enables
+   STIBP, too.
+
+   AMD Automatic IBRS does not protect userspace, and Legacy IBRS systems clear
+   the IBRS bit on exit to userspace, therefore both explicitly enable STIBP.
 
    The retpoline mitigation is turned on by default on vulnerable
    CPUs. It can be forced on or off by the administrator
diff --git a/Documentation/admin-guide/hw-vuln/srso.rst b/Documentation/admin-guide/hw-vuln/srso.rst
new file mode 100644
index 0000000000000..b6cfb51cb0b46
--- /dev/null
+++ b/Documentation/admin-guide/hw-vuln/srso.rst
@@ -0,0 +1,150 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Speculative Return Stack Overflow (SRSO)
+========================================
+
+This is a mitigation for the speculative return stack overflow (SRSO)
+vulnerability found on AMD processors. The mechanism is by now the well
+known scenario of poisoning CPU functional units - the Branch Target
+Buffer (BTB) and Return Address Predictor (RAP) in this case - and then
+tricking the elevated privilege domain (the kernel) into leaking
+sensitive data.
+
+AMD CPUs predict RET instructions using a Return Address Predictor (aka
+Return Address Stack/Return Stack Buffer). In some cases, a non-architectural
+CALL instruction (i.e., an instruction predicted to be a CALL but is
+not actually a CALL) can create an entry in the RAP which may be used
+to predict the target of a subsequent RET instruction.
+
+The specific circumstances that lead to this varies by microarchitecture
+but the concern is that an attacker can mis-train the CPU BTB to predict
+non-architectural CALL instructions in kernel space and use this to
+control the speculative target of a subsequent kernel RET, potentially
+leading to information disclosure via a speculative side-channel.
+
+The issue is tracked under CVE-2023-20569.
+
+Affected processors
+-------------------
+
+AMD Zen, generations 1-4. That is, all families 0x17 and 0x19. Older
+processors have not been investigated.
+
+System information and options
+------------------------------
+
+First of all, it is required that the latest microcode be loaded for
+mitigations to be effective.
+
+The sysfs file showing SRSO mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
+
+The possible values in this file are:
+
+ * 'Not affected':
+
+   The processor is not vulnerable
+
+ * 'Vulnerable: no microcode':
+
+   The processor is vulnerable, no microcode extending IBPB
+   functionality to address the vulnerability has been applied.
+
+ * 'Mitigation: microcode':
+
+   Extended IBPB functionality microcode patch has been applied. It does
+   not address User->Kernel and Guest->Host transitions protection but it
+   does address User->User and VM->VM attack vectors.
+
+   Note that User->User mitigation is controlled by how the IBPB aspect in
+   the Spectre v2 mitigation is selected:
+
+    * conditional IBPB:
+
+      where each process can select whether it needs an IBPB issued
+      around it PR_SPEC_DISABLE/_ENABLE etc, see :doc:`spectre`
+
+    * strict:
+
+      i.e., always on - by supplying spectre_v2_user=on on the kernel
+      command line
+
+   (spec_rstack_overflow=microcode)
+
+ * 'Mitigation: safe RET':
+
+   Software-only mitigation. It complements the extended IBPB microcode
+   patch functionality by addressing User->Kernel and Guest->Host
+   transitions protection.
+
+   Selected by default or by spec_rstack_overflow=safe-ret
+
+ * 'Mitigation: IBPB':
+
+   Similar protection as "safe RET" above but employs an IBPB barrier on
+   privilege domain crossings (User->Kernel, Guest->Host).
+
+  (spec_rstack_overflow=ibpb)
+
+ * 'Mitigation: IBPB on VMEXIT':
+
+   Mitigation addressing the cloud provider scenario - the Guest->Host
+   transitions only.
+
+   (spec_rstack_overflow=ibpb-vmexit)
+
+
+
+In order to exploit vulnerability, an attacker needs to:
+
+ - gain local access on the machine
+
+ - break kASLR
+
+ - find gadgets in the running kernel in order to use them in the exploit
+
+ - potentially create and pin an additional workload on the sibling
+   thread, depending on the microarchitecture (not necessary on fam 0x19)
+
+ - run the exploit
+
+Considering the performance implications of each mitigation type, the
+default one is 'Mitigation: safe RET' which should take care of most
+attack vectors, including the local User->Kernel one.
+
+As always, the user is advised to keep her/his system up-to-date by
+applying software updates regularly.
+
+The default setting will be reevaluated when needed and especially when
+new attack vectors appear.
+
+As one can surmise, 'Mitigation: safe RET' does come at the cost of some
+performance depending on the workload. If one trusts her/his userspace
+and does not want to suffer the performance impact, one can always
+disable the mitigation with spec_rstack_overflow=off.
+
+Similarly, 'Mitigation: IBPB' is another full mitigation type employing
+an indrect branch prediction barrier after having applied the required
+microcode patch for one's system. This mitigation comes also at
+a performance cost.
+
+Mitigation: safe RET
+--------------------
+
+The mitigation works by ensuring all RET instructions speculate to
+a controlled location, similar to how speculation is controlled in the
+retpoline sequence.  To accomplish this, the __x86_return_thunk forces
+the CPU to mispredict every function return using a 'safe return'
+sequence.
+
+To ensure the safety of this mitigation, the kernel must ensure that the
+safe return sequence is itself free from attacker interference.  In Zen3
+and Zen4, this is accomplished by creating a BTB alias between the
+untraining function srso_alias_untrain_ret() and the safe return
+function srso_alias_safe_ret() which results in evicting a potentially
+poisoned BTB entry and using that safe one for all function returns.
+
+In older Zen1 and Zen2, this is accomplished using a reinterpretation
+technique similar to Retbleed one: srso_untrain_ret() and
+srso_safe_ret().
diff --git a/Documentation/admin-guide/kdump/vmcoreinfo.rst b/Documentation/admin-guide/kdump/vmcoreinfo.rst
index c18d94fa64704..f8ebb63b6c5d2 100644
--- a/Documentation/admin-guide/kdump/vmcoreinfo.rst
+++ b/Documentation/admin-guide/kdump/vmcoreinfo.rst
@@ -624,3 +624,9 @@ Used to get the correct ranges:
   * VMALLOC_START ~ VMALLOC_END : vmalloc() / ioremap() space.
   * VMEMMAP_START ~ VMEMMAP_END : vmemmap space, used for struct page array.
   * KERNEL_LINK_ADDR : start address of Kernel link and BPF
+
+va_kernel_pa_offset
+-------------------
+
+Indicates the offset between the kernel virtual and physical mappings.
+Used to translate virtual to physical addresses.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 9e5bab29685ff..722b6eca2e938 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1,17 +1,17 @@
-	acpi=		[HW,ACPI,X86,ARM64]
+	acpi=		[HW,ACPI,X86,ARM64,RISCV64]
 			Advanced Configuration and Power Interface
 			Format: { force | on | off | strict | noirq | rsdt |
 				  copy_dsdt }
 			force -- enable ACPI if default was off
-			on -- enable ACPI but allow fallback to DT [arm64]
+			on -- enable ACPI but allow fallback to DT [arm64,riscv64]
 			off -- disable ACPI if default was on
 			noirq -- do not use ACPI for IRQ routing
 			strict -- Be less tolerant of platforms that are not
 				strictly ACPI specification compliant.
 			rsdt -- prefer RSDT over (default) XSDT
 			copy_dsdt -- copy DSDT to memory
-			For ARM64, ONLY "acpi=off", "acpi=on" or "acpi=force"
-			are available
+			For ARM64 and RISCV64, ONLY "acpi=off", "acpi=on" or
+			"acpi=force" are available
 
 			See also Documentation/power/runtime_pm.rst, pci=noacpi
 
@@ -304,7 +304,7 @@
 			EL0 is indicated by /sys/devices/system/cpu/aarch32_el0
 			and hot-unplug operations may be restricted.
 
-			See Documentation/arm64/asymmetric-32bit.rst for more
+			See Documentation/arch/arm64/asymmetric-32bit.rst for more
 			information.
 
 	amd_iommu=	[HW,X86-64]
@@ -323,6 +323,7 @@
 				       option with care.
 			pgtbl_v1     - Use v1 page table for DMA-API (Default).
 			pgtbl_v2     - Use v2 page table for DMA-API.
+			irtcachedis  - Disable Interrupt Remapping Table (IRT) caching.
 
 	amd_iommu_dump=	[HW,X86-64]
 			Enable AMD IOMMU driver option to dump the ACPI table
@@ -429,6 +430,9 @@
 	arm64.nosme	[ARM64] Unconditionally disable Scalable Matrix
 			Extension support
 
+	arm64.nomops	[ARM64] Unconditionally disable Memory Copy and Memory
+			Set instructions support
+
 	ataflop=	[HW,M68k]
 
 	atarimouse=	[HW,MOUSE] Atari Mouse
@@ -818,20 +822,6 @@
 			Format:
 			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
-	cpu0_hotplug	[X86] Turn on CPU0 hotplug feature when
-			CONFIG_BOOTPARAM_HOTPLUG_CPU0 is off.
-			Some features depend on CPU0. Known dependencies are:
-			1. Resume from suspend/hibernate depends on CPU0.
-			Suspend/hibernate will fail if CPU0 is offline and you
-			need to online CPU0 before suspend/hibernate.
-			2. PIC interrupts also depend on CPU0. CPU0 can't be
-			removed if a PIC interrupt is detected.
-			It's said poweroff/reboot may depend on CPU0 on some
-			machines although I haven't seen such issues so far
-			after CPU0 is offline on a few tested machines.
-			If the dependencies are under your control, you can
-			turn on cpu0_hotplug.
-
 	cpuidle.off=1	[CPU_IDLE]
 			disable the cpuidle sub-system
 
@@ -852,6 +842,12 @@
 			on every CPU online, such as boot, and resume from suspend.
 			Default: 10000
 
+	cpuhp.parallel=
+			[SMP] Enable/disable parallel bringup of secondary CPUs
+			Format: <bool>
+			Default is enabled if CONFIG_HOTPLUG_PARALLEL=y. Otherwise
+			the parameter has no effect.
+
 	crash_kexec_post_notifiers
 			Run kdump after running panic-notifiers and dumping
 			kmsg. This only for the users who doubt kdump always
@@ -1627,6 +1623,26 @@
 			Format: off | on
 			default: on
 
+	gather_data_sampling=
+			[X86,INTEL] Control the Gather Data Sampling (GDS)
+			mitigation.
+
+			Gather Data Sampling is a hardware vulnerability which
+			allows unprivileged speculative access to data which was
+			previously stored in vector registers.
+
+			This issue is mitigated by default in updated microcode.
+			The mitigation may have a performance impact but can be
+			disabled. On systems without the microcode mitigation
+			disabling AVX serves as a mitigation.
+
+			force:	Disable AVX to mitigate systems without
+				microcode mitigation. No effect if the microcode
+				mitigation is present. Known to cause crashes in
+				userspace with buggy AVX enumeration.
+
+			off:	Disable GDS mitigation.
+
 	gcov_persist=	[GCOV] When non-zero (default), profiling data for
 			kernel modules is saved and remains accessible via
 			debugfs, even when the module is unloaded/reloaded.
@@ -2117,6 +2133,16 @@
 			disable
 			  Do not enable intel_pstate as the default
 			  scaling driver for the supported processors
+                        active
+                          Use intel_pstate driver to bypass the scaling
+                          governors layer of cpufreq and provides it own
+                          algorithms for p-state selection. There are two
+                          P-state selection algorithms provided by
+                          intel_pstate in the active mode: powersave and
+                          performance.  The way they both operate depends
+                          on whether or not the hardware managed P-states
+                          (HWP) feature has been enabled in the processor
+                          and possibly on the processor model.
 			passive
 			  Use intel_pstate as a scaling driver, but configure it
 			  to work with generic cpufreq governors (instead of
@@ -2551,12 +2577,13 @@
 			If the value is 0 (the default), KVM will pick a period based
 			on the ratio, such that a page is zapped after 1 hour on average.
 
-	kvm-amd.nested=	[KVM,AMD] Allow nested virtualization in KVM/SVM.
-			Default is 1 (enabled)
+	kvm-amd.nested=	[KVM,AMD] Control nested virtualization feature in
+			KVM/SVM. Default is 1 (enabled).
 
-	kvm-amd.npt=	[KVM,AMD] Disable nested paging (virtualized MMU)
-			for all guests.
-			Default is 1 (enabled) if in 64-bit or 32-bit PAE mode.
+	kvm-amd.npt=	[KVM,AMD] Control KVM's use of Nested Page Tables,
+			a.k.a. Two-Dimensional Page Tables. Default is 1
+			(enabled). Disable by KVM if hardware lacks support
+			for NPT.
 
 	kvm-arm.mode=
 			[KVM,ARM] Select one of KVM/arm64's modes of operation.
@@ -2602,30 +2629,33 @@
 			Format: <integer>
 			Default: 5
 
-	kvm-intel.ept=	[KVM,Intel] Disable extended page tables
-			(virtualized MMU) support on capable Intel chips.
-			Default is 1 (enabled)
+	kvm-intel.ept=	[KVM,Intel] Control KVM's use of Extended Page Tables,
+			a.k.a. Two-Dimensional Page Tables.  Default is 1
+			(enabled). Disable by KVM if hardware lacks support
+			for EPT.
 
 	kvm-intel.emulate_invalid_guest_state=
-			[KVM,Intel] Disable emulation of invalid guest state.
-			Ignored if kvm-intel.enable_unrestricted_guest=1, as
-			guest state is never invalid for unrestricted guests.
-			This param doesn't apply to nested guests (L2), as KVM
-			never emulates invalid L2 guest state.
-			Default is 1 (enabled)
+			[KVM,Intel] Control whether to emulate invalid guest
+			state. Ignored if kvm-intel.enable_unrestricted_guest=1,
+			as guest state is never invalid for unrestricted
+			guests. This param doesn't apply to nested guests (L2),
+			as KVM never emulates invalid L2 guest state.
+			Default is 1 (enabled).
 
 	kvm-intel.flexpriority=
-			[KVM,Intel] Disable FlexPriority feature (TPR shadow).
-			Default is 1 (enabled)
+			[KVM,Intel] Control KVM's use of FlexPriority feature
+			(TPR shadow). Default is 1 (enabled). Disalbe by KVM if
+			hardware lacks support for it.
 
 	kvm-intel.nested=
-			[KVM,Intel] Enable VMX nesting (nVMX).
-			Default is 0 (disabled)
+			[KVM,Intel] Control nested virtualization feature in
+			KVM/VMX. Default is 1 (enabled).
 
 	kvm-intel.unrestricted_guest=
-			[KVM,Intel] Disable unrestricted guest feature
-			(virtualized real and unpaged mode) on capable
-			Intel chips. Default is 1 (enabled)
+			[KVM,Intel] Control KVM's use of unrestricted guest
+			feature (virtualized real and unpaged mode). Default
+			is 1 (enabled). Disable by KVM if EPT is disabled or
+			hardware lacks support for it.
 
 	kvm-intel.vmentry_l1d_flush=[KVM,Intel] Mitigation for L1 Terminal Fault
 			CVE-2018-3620.
@@ -2639,9 +2669,10 @@
 
 			Default is cond (do L1 cache flush in specific instances)
 
-	kvm-intel.vpid=	[KVM,Intel] Disable Virtual Processor Identification
-			feature (tagged TLBs) on capable Intel chips.
-			Default is 1 (enabled)
+	kvm-intel.vpid=	[KVM,Intel] Control KVM's use of Virtual Processor
+			Identification feature (tagged TLBs). Default is 1
+			(enabled). Disable by KVM if hardware lacks support
+			for it.
 
 	l1d_flush=	[X86,INTEL]
 			Control mitigation for L1D based snooping vulnerability.
@@ -3262,24 +3293,25 @@
 				Disable all optional CPU mitigations.  This
 				improves system performance, but it may also
 				expose users to several CPU vulnerabilities.
-				Equivalent to: nopti [X86,PPC]
-					       if nokaslr then kpti=0 [ARM64]
-					       nospectre_v1 [X86,PPC]
-					       nobp=0 [S390]
-					       nospectre_v2 [X86,PPC,S390,ARM64]
-					       spectre_v2_user=off [X86]
-					       spec_store_bypass_disable=off [X86,PPC]
-					       ssbd=force-off [ARM64]
-					       nospectre_bhb [ARM64]
+				Equivalent to: if nokaslr then kpti=0 [ARM64]
+					       gather_data_sampling=off [X86]
+					       kvm.nx_huge_pages=off [X86]
 					       l1tf=off [X86]
 					       mds=off [X86]
-					       tsx_async_abort=off [X86]
-					       kvm.nx_huge_pages=off [X86]
-					       srbds=off [X86,INTEL]
+					       mmio_stale_data=off [X86]
 					       no_entry_flush [PPC]
 					       no_uaccess_flush [PPC]
-					       mmio_stale_data=off [X86]
+					       nobp=0 [S390]
+					       nopti [X86,PPC]
+					       nospectre_bhb [ARM64]
+					       nospectre_v1 [X86,PPC]
+					       nospectre_v2 [X86,PPC,S390,ARM64]
 					       retbleed=off [X86]
+					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_v2_user=off [X86]
+					       srbds=off [X86,INTEL]
+					       ssbd=force-off [ARM64]
+					       tsx_async_abort=off [X86]
 
 				Exceptions:
 					       This does not have any effect on
@@ -3423,6 +3455,10 @@
 			[HW] Make the MicroTouch USB driver use raw coordinates
 			('y', default) or cooked coordinates ('n')
 
+	mtrr=debug	[X86]
+			Enable printing debug information related to MTRR
+			registers at boot time.
+
 	mtrr_chunk_size=nn[KMG] [X86]
 			used for mtrr cleanup. It is largest continuous chunk
 			that could hold holes aka. UC entries.
@@ -3702,8 +3738,8 @@
 
 	nohibernate	[HIBERNATION] Disable hibernation and resume.
 
-	nohlt		[ARM,ARM64,MICROBLAZE,SH] Forces the kernel to busy wait
-			in do_idle() and not use the arch_cpu_idle()
+	nohlt		[ARM,ARM64,MICROBLAZE,MIPS,SH] Forces the kernel to
+			busy wait in do_idle() and not use the arch_cpu_idle()
 			implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP
 			to be effective. This is useful on platforms where the
 			sleep(SH) or wfi(ARM,ARM64) instructions do not work
@@ -3838,7 +3874,7 @@
 	nosmp		[SMP] Tells an SMP kernel to act as a UP kernel,
 			and disable the IO APIC.  legacy for "maxcpus=0".
 
-	nosmt		[KNL,S390] Disable symmetric multithreading (SMT).
+	nosmt		[KNL,MIPS,S390] Disable symmetric multithreading (SMT).
 			Equivalent to smt=1.
 
 			[KNL,X86] Disable symmetric multithreading (SMT).
@@ -4049,7 +4085,7 @@
 			extra details on the taint flags that users can pick
 			to compose the bitmask to assign to panic_on_taint.
 
-	panic_on_warn	panic() instead of WARN().  Useful to cause kdump
+	panic_on_warn=1	panic() instead of WARN().  Useful to cause kdump
 			on a WARN().
 
 	parkbd.port=	[HW] Parallel port number the keyboard adapter is
@@ -4736,43 +4772,6 @@
 			the propagation of recent CPU-hotplug changes up
 			the rcu_node combining tree.
 
-	rcutree.use_softirq=	[KNL]
-			If set to zero, move all RCU_SOFTIRQ processing to
-			per-CPU rcuc kthreads.  Defaults to a non-zero
-			value, meaning that RCU_SOFTIRQ is used by default.
-			Specify rcutree.use_softirq=0 to use rcuc kthreads.
-
-			But note that CONFIG_PREEMPT_RT=y kernels disable
-			this kernel boot parameter, forcibly setting it
-			to zero.
-
-	rcutree.rcu_fanout_exact= [KNL]
-			Disable autobalancing of the rcu_node combining
-			tree.  This is used by rcutorture, and might
-			possibly be useful for architectures having high
-			cache-to-cache transfer latencies.
-
-	rcutree.rcu_fanout_leaf= [KNL]
-			Change the number of CPUs assigned to each
-			leaf rcu_node structure.  Useful for very
-			large systems, which will choose the value 64,
-			and for NUMA systems with large remote-access
-			latencies, which will choose a value aligned
-			with the appropriate hardware boundaries.
-
-	rcutree.rcu_min_cached_objs= [KNL]
-			Minimum number of objects which are cached and
-			maintained per one CPU. Object size is equal
-			to PAGE_SIZE. The cache allows to reduce the
-			pressure to page allocator, also it makes the
-			whole algorithm to behave better in low memory
-			condition.
-
-	rcutree.rcu_delay_page_cache_fill_msec= [KNL]
-			Set the page-cache refill delay (in milliseconds)
-			in response to low-memory conditions.  The range
-			of permitted values is in the range 0:100000.
-
 	rcutree.jiffies_till_first_fqs= [KNL]
 			Set delay from grace-period initialization to
 			first attempt to force quiescent states.
@@ -4811,21 +4810,6 @@
 			When RCU_NOCB_CPU is set, also adjust the
 			priority of NOCB callback kthreads.
 
-	rcutree.rcu_divisor= [KNL]
-			Set the shift-right count to use to compute
-			the callback-invocation batch limit bl from
-			the number of callbacks queued on this CPU.
-			The result will be bounded below by the value of
-			the rcutree.blimit kernel parameter.  Every bl
-			callbacks, the softirq handler will exit in
-			order to allow the CPU to do other work.
-
-			Please note that this callback-invocation batch
-			limit applies only to non-offloaded callback
-			invocation.  Offloaded callbacks are instead
-			invoked in the context of an rcuoc kthread, which
-			scheduler will preempt as it does any other task.
-
 	rcutree.nocb_nobypass_lim_per_jiffy= [KNL]
 			On callback-offloaded (rcu_nocbs) CPUs,
 			RCU reduces the lock contention that would
@@ -4839,14 +4823,6 @@
 			the ->nocb_bypass queue.  The definition of "too
 			many" is supplied by this kernel boot parameter.
 
-	rcutree.rcu_nocb_gp_stride= [KNL]
-			Set the number of NOCB callback kthreads in
-			each group, which defaults to the square root
-			of the number of CPUs.	Larger numbers reduce
-			the wakeup overhead on the global grace-period
-			kthread, but increases that same overhead on
-			each group's NOCB grace-period kthread.
-
 	rcutree.qhimark= [KNL]
 			Set threshold of queued RCU callbacks beyond which
 			batch limiting is disabled.
@@ -4864,6 +4840,56 @@
 			on rcutree.qhimark at boot time and to zero to
 			disable more aggressive help enlistment.
 
+	rcutree.rcu_delay_page_cache_fill_msec= [KNL]
+			Set the page-cache refill delay (in milliseconds)
+			in response to low-memory conditions.  The range
+			of permitted values is in the range 0:100000.
+
+	rcutree.rcu_divisor= [KNL]
+			Set the shift-right count to use to compute
+			the callback-invocation batch limit bl from
+			the number of callbacks queued on this CPU.
+			The result will be bounded below by the value of
+			the rcutree.blimit kernel parameter.  Every bl
+			callbacks, the softirq handler will exit in
+			order to allow the CPU to do other work.
+
+			Please note that this callback-invocation batch
+			limit applies only to non-offloaded callback
+			invocation.  Offloaded callbacks are instead
+			invoked in the context of an rcuoc kthread, which
+			scheduler will preempt as it does any other task.
+
+	rcutree.rcu_fanout_exact= [KNL]
+			Disable autobalancing of the rcu_node combining
+			tree.  This is used by rcutorture, and might
+			possibly be useful for architectures having high
+			cache-to-cache transfer latencies.
+
+	rcutree.rcu_fanout_leaf= [KNL]
+			Change the number of CPUs assigned to each
+			leaf rcu_node structure.  Useful for very
+			large systems, which will choose the value 64,
+			and for NUMA systems with large remote-access
+			latencies, which will choose a value aligned
+			with the appropriate hardware boundaries.
+
+	rcutree.rcu_min_cached_objs= [KNL]
+			Minimum number of objects which are cached and
+			maintained per one CPU. Object size is equal
+			to PAGE_SIZE. The cache allows to reduce the
+			pressure to page allocator, also it makes the
+			whole algorithm to behave better in low memory
+			condition.
+
+	rcutree.rcu_nocb_gp_stride= [KNL]
+			Set the number of NOCB callback kthreads in
+			each group, which defaults to the square root
+			of the number of CPUs.	Larger numbers reduce
+			the wakeup overhead on the global grace-period
+			kthread, but increases that same overhead on
+			each group's NOCB grace-period kthread.
+
 	rcutree.rcu_kick_kthreads= [KNL]
 			Cause the grace-period kthread to get an extra
 			wake_up() if it sleeps three times longer than
@@ -4871,6 +4897,13 @@
 			This wake_up() will be accompanied by a
 			WARN_ONCE() splat and an ftrace_dump().
 
+	rcutree.rcu_resched_ns= [KNL]
+			Limit the time spend invoking a batch of RCU
+			callbacks to the specified number of nanoseconds.
+			By default, this limit is checked only once
+			every 32 callbacks in order to limit the pain
+			inflicted by local_clock() overhead.
+
 	rcutree.rcu_unlock_delay= [KNL]
 			In CONFIG_RCU_STRICT_GRACE_PERIOD=y kernels,
 			this specifies an rcu_read_unlock()-time delay
@@ -4885,6 +4918,16 @@
 			rcu_node tree with an eye towards determining
 			why a new grace period has not yet started.
 
+	rcutree.use_softirq=	[KNL]
+			If set to zero, move all RCU_SOFTIRQ processing to
+			per-CPU rcuc kthreads.  Defaults to a non-zero
+			value, meaning that RCU_SOFTIRQ is used by default.
+			Specify rcutree.use_softirq=0 to use rcuc kthreads.
+
+			But note that CONFIG_PREEMPT_RT=y kernels disable
+			this kernel boot parameter, forcibly setting it
+			to zero.
+
 	rcuscale.gp_async= [KNL]
 			Measure performance of asynchronous
 			grace-period primitives such as call_rcu().
@@ -5087,8 +5130,17 @@
 
 	rcutorture.stall_cpu_block= [KNL]
 			Sleep while stalling if set.  This will result
-			in warnings from preemptible RCU in addition
-			to any other stall-related activity.
+			in warnings from preemptible RCU in addition to
+			any other stall-related activity.  Note that
+			in kernels built with CONFIG_PREEMPTION=n and
+			CONFIG_PREEMPT_COUNT=y, this parameter will
+			cause the CPU to pass through a quiescent state.
+			Given CONFIG_PREEMPTION=n, this will suppress
+			RCU CPU stall warnings, but will instead result
+			in scheduling-while-atomic splats.
+
+			Use of this module parameter results in splats.
+
 
 	rcutorture.stall_cpu_holdoff= [KNL]
 			Time to wait (s) after boot before inducing stall.
@@ -5452,7 +5504,12 @@
 			port and the regular usb controller gets disabled.
 
 	root=		[KNL] Root filesystem
-			See name_to_dev_t comment in init/do_mounts.c.
+			Usually this a a block device specifier of some kind,
+			see the early_lookup_bdev comment in
+			block/early-lookup.c for details.
+			Alternatively this can be "ram" for the legacy initial
+			ramdisk, "nfs" and "cifs" for root on a network file
+			system, or "mtd" and "ubi" for mounting from raw flash.
 
 	rootdelay=	[KNL] Delay (in seconds) to pause before attempting to
 			mount the root filesystem
@@ -5735,7 +5792,7 @@
 				1: Fast pin select (default)
 				2: ATC IRMode
 
-	smt=		[KNL,S390] Set the maximum number of threads (logical
+	smt=		[KNL,MIPS,S390] Set the maximum number of threads (logical
 			CPUs) to use per physical CPU on systems capable of
 			symmetric multithreading (SMT). Will be capped to the
 			actual hardware limit.
@@ -5839,6 +5896,17 @@
 			Not specifying this option is equivalent to
 			spectre_v2_user=auto.
 
+	spec_rstack_overflow=
+			[X86] Control RAS overflow mitigation on AMD Zen CPUs
+
+			off		- Disable mitigation
+			microcode	- Enable microcode mitigation only
+			safe-ret	- Enable sw-only safe RET mitigation (default)
+			ibpb		- Enable mitigation by issuing IBPB on
+					  kernel entry
+			ibpb-vmexit	- Issue IBPB only on VMEXIT
+					  (cloud-specific mitigation)
+
 	spec_store_bypass_disable=
 			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
 			(Speculative Store Bypass vulnerability)
@@ -6563,6 +6631,12 @@
 	unknown_nmi_panic
 			[X86] Cause panic on unknown NMI.
 
+	unwind_debug	[X86-64]
+			Enable unwinder debug output.  This can be
+			useful for debugging certain unwinder error
+			conditions, including corrupt stacks and
+			bad/missing unwinder metadata.
+
 	usbcore.authorized_default=
 			[USB] Default USB device authorization:
 			(default -1 = authorized except for wireless USB,
@@ -6931,6 +7005,18 @@
 			it can be updated at runtime by writing to the
 			corresponding sysfs file.
 
+	workqueue.cpu_intensive_thresh_us=
+			Per-cpu work items which run for longer than this
+			threshold are automatically considered CPU intensive
+			and excluded from concurrency management to prevent
+			them from noticeably delaying other per-cpu work
+			items. Default is 10000 (10ms).
+
+			If CONFIG_WQ_CPU_INTENSIVE_REPORT is set, the kernel
+			will report the work functions which violate this
+			threshold repeatedly. They are likely good
+			candidates for using WQ_UNBOUND workqueues instead.
+
 	workqueue.disable_numa
 			By default, all work items queued to unbound
 			workqueues are affine to the NUMA nodes they're
diff --git a/Documentation/admin-guide/media/rkisp1.rst b/Documentation/admin-guide/media/rkisp1.rst
index ccf418713623b..6f14d9561fa5b 100644
--- a/Documentation/admin-guide/media/rkisp1.rst
+++ b/Documentation/admin-guide/media/rkisp1.rst
@@ -10,8 +10,8 @@ Introduction
 ============
 
 This file documents the driver for the Rockchip ISP1 that is part of RK3288
-and RK3399 SoCs. The driver is located under drivers/staging/media/rkisp1
-and uses the Media-Controller API.
+and RK3399 SoCs. The driver is located under drivers/media/platform/rockchip/
+rkisp1 and uses the Media-Controller API.
 
 Revisions
 =========
diff --git a/Documentation/admin-guide/mm/damon/start.rst b/Documentation/admin-guide/mm/damon/start.rst
index 9f88afc734da4..7aa0071ff1c36 100644
--- a/Documentation/admin-guide/mm/damon/start.rst
+++ b/Documentation/admin-guide/mm/damon/start.rst
@@ -119,9 +119,9 @@ set size has chronologically changed.::
 Data Access Pattern Aware Memory Management
 ===========================================
 
-Below three commands make every memory region of size >=4K that doesn't
-accessed for >=60 seconds in your workload to be swapped out. ::
+Below command makes every memory region of size >=4K that has not accessed for
+>=60 seconds in your workload to be swapped out. ::
 
-    $ echo "#min-size max-size min-acc max-acc min-age max-age action" > test_scheme
-    $ echo "4K        max      0       0       60s     max     pageout" >> test_scheme
-    $ damo schemes -c test_scheme <pid of your workload>
+    $ sudo damo schemes --damos_access_rate 0 0 --damos_sz_region 4K max \
+                        --damos_age 60s max --damos_action pageout \
+                        <pid of your workload>
diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst
index 9b823fec974dd..2d495fa85a0ee 100644
--- a/Documentation/admin-guide/mm/damon/usage.rst
+++ b/Documentation/admin-guide/mm/damon/usage.rst
@@ -10,9 +10,8 @@ DAMON provides below interfaces for different users.
   `This <https://github.com/awslabs/damo>`_ is for privileged people such as
   system administrators who want a just-working human-friendly interface.
   Using this, users can use the DAMON’s major features in a human-friendly way.
-  It may not be highly tuned for special cases, though.  It supports both
-  virtual and physical address spaces monitoring.  For more detail, please
-  refer to its `usage document
+  It may not be highly tuned for special cases, though.  For more detail,
+  please refer to its `usage document
   <https://github.com/awslabs/damo/blob/next/USAGE.md>`_.
 - *sysfs interface.*
   :ref:`This <sysfs_interface>` is for privileged user space programmers who
@@ -20,11 +19,7 @@ DAMON provides below interfaces for different users.
   features by reading from and writing to special sysfs files.  Therefore,
   you can write and use your personalized DAMON sysfs wrapper programs that
   reads/writes the sysfs files instead of you.  The `DAMON user space tool
-  <https://github.com/awslabs/damo>`_ is one example of such programs.  It
-  supports both virtual and physical address spaces monitoring.  Note that this
-  interface provides only simple :ref:`statistics <damos_stats>` for the
-  monitoring results.  For detailed monitoring results, DAMON provides a
-  :ref:`tracepoint <tracepoint>`.
+  <https://github.com/awslabs/damo>`_ is one example of such programs.
 - *debugfs interface. (DEPRECATED!)*
   :ref:`This <debugfs_interface>` is almost identical to :ref:`sysfs interface
   <sysfs_interface>`.  This is deprecated, so users should move to the
@@ -139,7 +134,7 @@ scheme of the kdamond.  Writing ``clear_schemes_tried_regions`` to ``state``
 file clears the DAMON-based operating scheme action tried regions directory for
 each DAMON-based operation scheme of the kdamond.  For details of the
 DAMON-based operation scheme action tried regions directory, please refer to
-:ref:tried_regions section <sysfs_schemes_tried_regions>`.
+:ref:`tried_regions section <sysfs_schemes_tried_regions>`.
 
 If the state is ``on``, reading ``pid`` shows the pid of the kdamond thread.
 
@@ -259,12 +254,9 @@ be equal or smaller than ``start`` of directory ``N+1``.
 contexts/<N>/schemes/
 ---------------------
 
-For usual DAMON-based data access aware memory management optimizations, users
-would normally want the system to apply a memory management action to a memory
-region of a specific access pattern.  DAMON receives such formalized operation
-schemes from the user and applies those to the target memory regions.  Users
-can get and set the schemes by reading from and writing to files under this
-directory.
+The directory for DAMON-based Operation Schemes (:ref:`DAMOS
+<damon_design_damos>`).  Users can get and set the schemes by reading from and
+writing to files under this directory.
 
 In the beginning, this directory has only one file, ``nr_schemes``.  Writing a
 number (``N``) to the file creates the number of child directories named ``0``
@@ -277,12 +269,12 @@ In each scheme directory, five directories (``access_pattern``, ``quotas``,
 ``watermarks``, ``filters``, ``stats``, and ``tried_regions``) and one file
 (``action``) exist.
 
-The ``action`` file is for setting and getting what action you want to apply to
-memory regions having specific access pattern of the interest.  The keywords
-that can be written to and read from the file and their meaning are as below.
+The ``action`` file is for setting and getting the scheme's :ref:`action
+<damon_design_damos_action>`.  The keywords that can be written to and read
+from the file and their meaning are as below.
 
 Note that support of each action depends on the running DAMON operations set
-`implementation <sysfs_contexts>`.
+:ref:`implementation <sysfs_contexts>`.
 
  - ``willneed``: Call ``madvise()`` for the region with ``MADV_WILLNEED``.
    Supported by ``vaddr`` and ``fvaddr`` operations set.
@@ -304,32 +296,21 @@ Note that support of each action depends on the running DAMON operations set
 schemes/<N>/access_pattern/
 ---------------------------
 
-The target access pattern of each DAMON-based operation scheme is constructed
-with three ranges including the size of the region in bytes, number of
-monitored accesses per aggregate interval, and number of aggregated intervals
-for the age of the region.
+The directory for the target access :ref:`pattern
+<damon_design_damos_access_pattern>` of the given DAMON-based operation scheme.
 
 Under the ``access_pattern`` directory, three directories (``sz``,
 ``nr_accesses``, and ``age``) each having two files (``min`` and ``max``)
 exist.  You can set and get the access pattern for the given scheme by writing
 to and reading from the ``min`` and ``max`` files under ``sz``,
-``nr_accesses``, and ``age`` directories, respectively.
+``nr_accesses``, and ``age`` directories, respectively.  Note that the ``min``
+and the ``max`` form a closed interval.
 
 schemes/<N>/quotas/
 -------------------
 
-Optimal ``target access pattern`` for each ``action`` is workload dependent, so
-not easy to find.  Worse yet, setting a scheme of some action too aggressive
-can cause severe overhead.  To avoid such overhead, users can limit time and
-size quota for each scheme.  In detail, users can ask DAMON to try to use only
-up to specific time (``time quota``) for applying the action, and to apply the
-action to only up to specific amount (``size quota``) of memory regions having
-the target access pattern within a given time interval (``reset interval``).
-
-When the quota limit is expected to be exceeded, DAMON prioritizes found memory
-regions of the ``target access pattern`` based on their size, access frequency,
-and age.  For personalized prioritization, users can set the weights for the
-three properties.
+The directory for the :ref:`quotas <damon_design_damos_quotas>` of the given
+DAMON-based operation scheme.
 
 Under ``quotas`` directory, three files (``ms``, ``bytes``,
 ``reset_interval_ms``) and one directory (``weights``) having three files
@@ -337,23 +318,26 @@ Under ``quotas`` directory, three files (``ms``, ``bytes``,
 
 You can set the ``time quota`` in milliseconds, ``size quota`` in bytes, and
 ``reset interval`` in milliseconds by writing the values to the three files,
-respectively.  You can also set the prioritization weights for size, access
-frequency, and age in per-thousand unit by writing the values to the three
-files under the ``weights`` directory.
+respectively.  Then, DAMON tries to use only up to ``time quota`` milliseconds
+for applying the ``action`` to memory regions of the ``access_pattern``, and to
+apply the action to only up to ``bytes`` bytes of memory regions within the
+``reset_interval_ms``.  Setting both ``ms`` and ``bytes`` zero disables the
+quota limits.
+
+You can also set the :ref:`prioritization weights
+<damon_design_damos_quotas_prioritization>` for size, access frequency, and age
+in per-thousand unit by writing the values to the three files under the
+``weights`` directory.
 
 schemes/<N>/watermarks/
 -----------------------
 
-To allow easy activation and deactivation of each scheme based on system
-status, DAMON provides a feature called watermarks.  The feature receives five
-values called ``metric``, ``interval``, ``high``, ``mid``, and ``low``.  The
-``metric`` is the system metric such as free memory ratio that can be measured.
-If the metric value of the system is higher than the value in ``high`` or lower
-than ``low`` at the memoent, the scheme is deactivated.  If the value is lower
-than ``mid``, the scheme is activated.
+The directory for the :ref:`watermarks <damon_design_damos_watermarks>` of the
+given DAMON-based operation scheme.
 
 Under the watermarks directory, five files (``metric``, ``interval_us``,
-``high``, ``mid``, and ``low``) for setting each value exist.  You can set and
+``high``, ``mid``, and ``low``) for setting the metric, the time interval
+between check of the metric, and the three watermarks exist.  You can set and
 get the five values by writing to the files, respectively.
 
 Keywords and meanings of those that can be written to the ``metric`` file are
@@ -367,12 +351,8 @@ The ``interval`` should written in microseconds unit.
 schemes/<N>/filters/
 --------------------
 
-Users could know something more than the kernel for specific types of memory.
-In the case, users could do their own management for the memory and hence
-doesn't want DAMOS bothers that.  Users could limit DAMOS by setting the access
-pattern of the scheme and/or the monitoring regions for the purpose, but that
-can be inefficient in some cases.  In such cases, users could set non-access
-pattern driven filters using files in this directory.
+The directory for the :ref:`filters <damon_design_damos_filters>` of the given
+DAMON-based operation scheme.
 
 In the beginning, this directory has only one file, ``nr_filters``.  Writing a
 number (``N``) to the file creates the number of child directories named ``0``
@@ -432,13 +412,17 @@ starting from ``0`` under this directory.  Each directory contains files
 exposing detailed information about each of the memory region that the
 corresponding scheme's ``action`` has tried to be applied under this directory,
 during next :ref:`aggregation interval <sysfs_monitoring_attrs>`.  The
-information includes address range, ``nr_accesses``, , and ``age`` of the
-region.
+information includes address range, ``nr_accesses``, and ``age`` of the region.
 
 The directories will be removed when another special keyword,
 ``clear_schemes_tried_regions``, is written to the relevant
 ``kdamonds/<N>/state`` file.
 
+The expected usage of this directory is investigations of schemes' behaviors,
+and query-like efficient data access monitoring results retrievals.  For the
+latter use case, in particular, users can set the ``action`` as ``stat`` and
+set the ``access pattern`` as their interested pattern that they want to query.
+
 tried_regions/<N>/
 ------------------
 
@@ -600,15 +584,10 @@ update.
 Schemes
 -------
 
-For usual DAMON-based data access aware memory management optimizations, users
-would simply want the system to apply a memory management action to a memory
-region of a specific access pattern.  DAMON receives such formalized operation
-schemes from the user and applies those to the target processes.
-
-Users can get and set the schemes by reading from and writing to ``schemes``
-debugfs file.  Reading the file also shows the statistics of each scheme.  To
-the file, each of the schemes should be represented in each line in below
-form::
+Users can get and set the DAMON-based operation :ref:`schemes
+<damon_design_damos>` by reading from and writing to ``schemes`` debugfs file.
+Reading the file also shows the statistics of each scheme.  To the file, each
+of the schemes should be represented in each line in below form::
 
     <target access pattern> <action> <quota> <watermarks>
 
@@ -617,8 +596,9 @@ You can disable schemes by simply writing an empty string to the file.
 Target Access Pattern
 ~~~~~~~~~~~~~~~~~~~~~
 
-The ``<target access pattern>`` is constructed with three ranges in below
-form::
+The target access :ref:`pattern <damon_design_damos_access_pattern>` of the
+scheme.  The ``<target access pattern>`` is constructed with three ranges in
+below form::
 
     min-size max-size min-acc max-acc min-age max-age
 
@@ -631,9 +611,9 @@ closed interval.
 Action
 ~~~~~~
 
-The ``<action>`` is a predefined integer for memory management actions, which
-DAMON will apply to the regions having the target access pattern.  The
-supported numbers and their meanings are as below.
+The ``<action>`` is a predefined integer for memory management :ref:`actions
+<damon_design_damos_action>`.  The supported numbers and their meanings are as
+below.
 
  - 0: Call ``madvise()`` for the region with ``MADV_WILLNEED``.  Ignored if
    ``target`` is ``paddr``.
@@ -649,10 +629,8 @@ supported numbers and their meanings are as below.
 Quota
 ~~~~~
 
-Optimal ``target access pattern`` for each ``action`` is workload dependent, so
-not easy to find.  Worse yet, setting a scheme of some action too aggressive
-can cause severe overhead.  To avoid such overhead, users can limit time and
-size quota for the scheme via the ``<quota>`` in below form::
+Users can set the :ref:`quotas <damon_design_damos_quotas>` of the given scheme
+via the ``<quota>`` in below form::
 
     <ms> <sz> <reset interval> <priority weights>
 
@@ -662,19 +640,17 @@ the action to memory regions of the ``target access pattern`` within the
 ``<sz>`` bytes of memory regions within the ``<reset interval>``.  Setting both
 ``<ms>`` and ``<sz>`` zero disables the quota limits.
 
-When the quota limit is expected to be exceeded, DAMON prioritizes found memory
-regions of the ``target access pattern`` based on their size, access frequency,
-and age.  For personalized prioritization, users can set the weights for the
-three properties in ``<priority weights>`` in below form::
+For the :ref:`prioritization <damon_design_damos_quotas_prioritization>`, users
+can set the weights for the three properties in ``<priority weights>`` in below
+form::
 
     <size weight> <access frequency weight> <age weight>
 
 Watermarks
 ~~~~~~~~~~
 
-Some schemes would need to run based on current value of the system's specific
-metrics like free memory ratio.  For such cases, users can specify watermarks
-for the condition.::
+Users can specify :ref:`watermarks <damon_design_damos_watermarks>` of the
+given scheme via ``<watermarks>`` in below form::
 
     <metric> <check interval> <high mark> <middle mark> <low mark>
 
@@ -797,10 +773,12 @@ root directory only.
 Tracepoint for Monitoring Results
 =================================
 
-DAMON provides the monitoring results via a tracepoint,
-``damon:damon_aggregated``.  While the monitoring is turned on, you could
-record the tracepoint events and show results using tracepoint supporting tools
-like ``perf``.  For example::
+Users can get the monitoring results via the :ref:`tried_regions
+<sysfs_schemes_tried_regions>` or a tracepoint, ``damon:damon_aggregated``.
+While the tried regions directory is useful for getting a snapshot, the
+tracepoint is useful for getting a full record of the results.  While the
+monitoring is turned on, you could record the tracepoint events and show
+results using tracepoint supporting tools like ``perf``.  For example::
 
     # echo on > monitor_on
     # perf record -e damon:damon_aggregated &
diff --git a/Documentation/admin-guide/perf/cxl.rst b/Documentation/admin-guide/perf/cxl.rst
new file mode 100644
index 0000000000000..9233ea0d0b104
--- /dev/null
+++ b/Documentation/admin-guide/perf/cxl.rst
@@ -0,0 +1,68 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+CXL Performance Monitoring Unit (CPMU)
+======================================
+
+The CXL rev 3.0 specification provides a definition of CXL Performance
+Monitoring Unit in section 13.2: Performance Monitoring.
+
+CXL components (e.g. Root Port, Switch Upstream Port, End Point) may have
+any number of CPMU instances. CPMU capabilities are fully discoverable from
+the devices. The specification provides event definitions for all CXL protocol
+message types and a set of additional events for things commonly counted on
+CXL devices (e.g. DRAM events).
+
+CPMU driver
+===========
+
+The CPMU driver registers a perf PMU with the name pmu_mem<X>.<Y> on the CXL bus
+representing the Yth CPMU for memX.
+
+    /sys/bus/cxl/device/pmu_mem<X>.<Y>
+
+The associated PMU is registered as
+
+   /sys/bus/event_sources/devices/cxl_pmu_mem<X>.<Y>
+
+In common with other CXL bus devices, the id has no specific meaning and the
+relationship to specific CXL device should be established via the device parent
+of the device on the CXL bus.
+
+PMU driver provides description of available events and filter options in sysfs.
+
+The "format" directory describes all formats of the config (event vendor id,
+group id and mask) config1 (threshold, filter enables) and config2 (filter
+parameters) fields of the perf_event_attr structure.  The "events" directory
+describes all documented events show in perf list.
+
+The events shown in perf list are the most fine grained events with a single
+bit of the event mask set. More general events may be enable by setting
+multiple mask bits in config. For example, all Device to Host Read Requests
+may be captured on a single counter by setting the bits for all of
+
+* d2h_req_rdcurr
+* d2h_req_rdown
+* d2h_req_rdshared
+* d2h_req_rdany
+* d2h_req_rdownnodata
+
+Example of usage::
+
+  $#perf list
+  cxl_pmu_mem0.0/clock_ticks/                        [Kernel PMU event]
+  cxl_pmu_mem0.0/d2h_req_rdshared/                   [Kernel PMU event]
+  cxl_pmu_mem0.0/h2d_req_snpcur/                     [Kernel PMU event]
+  cxl_pmu_mem0.0/h2d_req_snpdata/                    [Kernel PMU event]
+  cxl_pmu_mem0.0/h2d_req_snpinv/                     [Kernel PMU event]
+  -----------------------------------------------------------
+
+  $# perf stat -a -e cxl_pmu_mem0.0/clock_ticks/ -e cxl_pmu_mem0.0/d2h_req_rdshared/
+
+Vendor specific events may also be available and if so can be used via
+
+  $# perf stat -a -e cxl_pmu_mem0.0/vid=VID,gid=GID,mask=MASK/
+
+The driver does not support sampling so "perf record" is unsupported.
+It only supports system-wide counting so attaching to a task is
+unsupported.
diff --git a/Documentation/admin-guide/perf/hisi-pmu.rst b/Documentation/admin-guide/perf/hisi-pmu.rst
index 5469793605131..e0174d20809a1 100644
--- a/Documentation/admin-guide/perf/hisi-pmu.rst
+++ b/Documentation/admin-guide/perf/hisi-pmu.rst
@@ -56,14 +56,14 @@ Example usage of perf::
 For HiSilicon uncore PMU v2 whose identifier is 0x30, the topology is the same
 as PMU v1, but some new functions are added to the hardware.
 
-(a) L3C PMU supports filtering by core/thread within the cluster which can be
+1. L3C PMU supports filtering by core/thread within the cluster which can be
 specified as a bitmap::
 
   $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0x3/ sleep 5
 
 This will only count the operations from core/thread 0 and 1 in this cluster.
 
-(b) Tracetag allow the user to chose to count only read, write or atomic
+2. Tracetag allow the user to chose to count only read, write or atomic
 operations via the tt_req parameeter in perf. The default value counts all
 operations. tt_req is 3bits, 3'b100 represents read operations, 3'b101
 represents write operations, 3'b110 represents atomic store operations and
@@ -73,14 +73,16 @@ represents write operations, 3'b110 represents atomic store operations and
 
 This will only count the read operations in this cluster.
 
-(c) Datasrc allows the user to check where the data comes from. It is 5 bits.
+3. Datasrc allows the user to check where the data comes from. It is 5 bits.
 Some important codes are as follows:
-5'b00001: comes from L3C in this die;
-5'b01000: comes from L3C in the cross-die;
-5'b01001: comes from L3C which is in another socket;
-5'b01110: comes from the local DDR;
-5'b01111: comes from the cross-die DDR;
-5'b10000: comes from cross-socket DDR;
+
+- 5'b00001: comes from L3C in this die;
+- 5'b01000: comes from L3C in the cross-die;
+- 5'b01001: comes from L3C which is in another socket;
+- 5'b01110: comes from the local DDR;
+- 5'b01111: comes from the cross-die DDR;
+- 5'b10000: comes from cross-socket DDR;
+
 etc, it is mainly helpful to find that the data source is nearest from the CPU
 cores. If datasrc_cfg is used in the multi-chips, the datasrc_skt shall be
 configured in perf command::
@@ -88,15 +90,25 @@ configured in perf command::
   $# perf stat -a -e hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xE/,
   hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xF/ sleep 5
 
-(d)Some HiSilicon SoCs encapsulate multiple CPU and IO dies. Each CPU die
+4. Some HiSilicon SoCs encapsulate multiple CPU and IO dies. Each CPU die
 contains several Compute Clusters (CCLs). The I/O dies are called Super I/O
 clusters (SICL) containing multiple I/O clusters (ICLs). Each CCL/ICL in the
 SoC has a unique ID. Each ID is 11bits, include a 6-bit SCCL-ID and 5-bit
 CCL/ICL-ID. For I/O die, the ICL-ID is followed by:
-5'b00000: I/O_MGMT_ICL;
-5'b00001: Network_ICL;
-5'b00011: HAC_ICL;
-5'b10000: PCIe_ICL;
+
+- 5'b00000: I/O_MGMT_ICL;
+- 5'b00001: Network_ICL;
+- 5'b00011: HAC_ICL;
+- 5'b10000: PCIe_ICL;
+
+5. uring_channel: UC PMU events 0x47~0x59 supports filtering by tx request
+uring channel. It is 2 bits. Some important codes are as follows:
+
+- 2'b11: count the events which sent to the uring_ext (MATA) channel;
+- 2'b01: is the same as 2'b11;
+- 2'b10: count the events which sent to the uring (non-MATA) channel;
+- 2'b00: default value, count the events which sent to the both uring and
+  uring_ext channel;
 
 Users could configure IDs to count data come from specific CCL/ICL, by setting
 srcid_cmd & srcid_msk, and data desitined for specific CCL/ICL by setting
diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst
index 9de64a40adab9..f60be04e4e336 100644
--- a/Documentation/admin-guide/perf/index.rst
+++ b/Documentation/admin-guide/perf/index.rst
@@ -21,3 +21,4 @@ Performance monitor support
    alibaba_pmu
    nvidia-pmu
    meson-ddr-pmu
+   cxl
diff --git a/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst b/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst
index 09169d9358356..5ab3440e6cee0 100644
--- a/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst
+++ b/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst
@@ -5,7 +5,7 @@
 Intel Uncore Frequency Scaling
 ==============================
 
-:Copyright: |copy| 2022 Intel Corporation
+:Copyright: |copy| 2022-2023 Intel Corporation
 
 :Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
 
@@ -58,3 +58,58 @@ Each package_*_die_* contains the following attributes:
 
 ``current_freq_khz``
 	This attribute is used to get the current uncore frequency.
+
+SoCs with TPMI (Topology Aware Register and PM Capsule Interface)
+-----------------------------------------------------------------
+
+An SoC can contain multiple power domains with individual or collection
+of mesh partitions. This partition is called fabric cluster.
+
+Certain type of meshes will need to run at the same frequency, they will
+be placed in the same fabric cluster. Benefit of fabric cluster is that it
+offers a scalable mechanism to deal with partitioned fabrics in a SoC.
+
+The current sysfs interface supports controls at package and die level.
+This interface is not enough to support more granular control at
+fabric cluster level.
+
+SoCs with the support of TPMI (Topology Aware Register and PM Capsule
+Interface), can have multiple power domains. Each power domain can
+contain one or more fabric clusters.
+
+To represent controls at fabric cluster level in addition to the
+controls at package and die level (like systems without TPMI
+support), sysfs is enhanced. This granular interface is presented in the
+sysfs with directories names prefixed with "uncore". For example:
+uncore00, uncore01 etc.
+
+The scope of control is specified by attributes "package_id", "domain_id"
+and "fabric_cluster_id" in the directory.
+
+Attributes in each directory:
+
+``domain_id``
+	This attribute is used to get the power domain id of this instance.
+
+``fabric_cluster_id``
+	This attribute is used to get the fabric cluster id of this instance.
+
+``package_id``
+	This attribute is used to get the package id of this instance.
+
+The other attributes are same as presented at package_*_die_* level.
+
+In most of current use cases, the "max_freq_khz" and "min_freq_khz"
+is updated at "package_*_die_*" level. This model will be still supported
+with the following approach:
+
+When user uses controls at "package_*_die_*" level, then every fabric
+cluster is affected in that package and die. For example: user changes
+"max_freq_khz" in the package_00_die_00, then "max_freq_khz" for uncore*
+directory with the same package id will be updated. In this case user can
+still update "max_freq_khz" at each uncore* level, which is more restrictive.
+Similarly, user can update "min_freq_khz" at "package_*_die_*" level
+to apply at each uncore* level.
+
+Support for "current_freq_khz" is available only at each fabric cluster
+level (i.e., in uncore* directory).
diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index d85d90f5d000d..3800fab1619b2 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -949,7 +949,7 @@ user space can read performance monitor counter registers directly.
 
 The default value is 0 (access disabled).
 
-See Documentation/arm64/perf.rst for more information.
+See Documentation/arch/arm64/perf.rst for more information.
 
 
 pid_max
diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst
index 466c560b0c304..4877563241f3b 100644
--- a/Documentation/admin-guide/sysctl/net.rst
+++ b/Documentation/admin-guide/sysctl/net.rst
@@ -386,8 +386,8 @@ Default : 0  (for compatibility reasons)
 txrehash
 --------
 
-Controls default hash rethink behaviour on listening socket when SO_TXREHASH
-option is set to SOCK_TXREHASH_DEFAULT (i. e. not overridden by setsockopt).
+Controls default hash rethink behaviour on socket when SO_TXREHASH option is set
+to SOCK_TXREHASH_DEFAULT (i. e. not overridden by setsockopt).
 
 If set to 1 (default), hash rethink is performed on listening socket.
 If set to 0, hash rethink is not performed.
diff --git a/Documentation/arch/arm/arm.rst b/Documentation/arch/arm/arm.rst
new file mode 100644
index 0000000000000..99d660fdf73fd
--- /dev/null
+++ b/Documentation/arch/arm/arm.rst
@@ -0,0 +1,212 @@
+=======================
+ARM Linux 2.6 and upper
+=======================
+
+    Please check <ftp://ftp.arm.linux.org.uk/pub/armlinux> for
+    updates.
+
+Compilation of kernel
+---------------------
+
+  In order to compile ARM Linux, you will need a compiler capable of
+  generating ARM ELF code with GNU extensions.  GCC 3.3 is known to be
+  a good compiler.  Fortunately, you needn't guess.  The kernel will report
+  an error if your compiler is a recognized offender.
+
+  To build ARM Linux natively, you shouldn't have to alter the ARCH = line
+  in the top level Makefile.  However, if you don't have the ARM Linux ELF
+  tools installed as default, then you should change the CROSS_COMPILE
+  line as detailed below.
+
+  If you wish to cross-compile, then alter the following lines in the top
+  level make file::
+
+    ARCH = <whatever>
+
+  with::
+
+    ARCH = arm
+
+  and::
+
+    CROSS_COMPILE=
+
+  to::
+
+    CROSS_COMPILE=<your-path-to-your-compiler-without-gcc>
+
+  eg.::
+
+    CROSS_COMPILE=arm-linux-
+
+  Do a 'make config', followed by 'make Image' to build the kernel
+  (arch/arm/boot/Image).  A compressed image can be built by doing a
+  'make zImage' instead of 'make Image'.
+
+
+Bug reports etc
+---------------
+
+  Please send patches to the patch system.  For more information, see
+  http://www.arm.linux.org.uk/developer/patches/info.php Always include some
+  explanation as to what the patch does and why it is needed.
+
+  Bug reports should be sent to linux-arm-kernel@lists.arm.linux.org.uk,
+  or submitted through the web form at
+  http://www.arm.linux.org.uk/developer/
+
+  When sending bug reports, please ensure that they contain all relevant
+  information, eg. the kernel messages that were printed before/during
+  the problem, what you were doing, etc.
+
+
+Include files
+-------------
+
+  Several new include directories have been created under include/asm-arm,
+  which are there to reduce the clutter in the top-level directory.  These
+  directories, and their purpose is listed below:
+
+  ============= ==========================================================
+   `arch-*`	machine/platform specific header files
+   `hardware`	driver-internal ARM specific data structures/definitions
+   `mach`	descriptions of generic ARM to specific machine interfaces
+   `proc-*`	processor dependent header files (currently only two
+		categories)
+  ============= ==========================================================
+
+
+Machine/Platform support
+------------------------
+
+  The ARM tree contains support for a lot of different machine types.  To
+  continue supporting these differences, it has become necessary to split
+  machine-specific parts by directory.  For this, the machine category is
+  used to select which directories and files get included (we will use
+  $(MACHINE) to refer to the category)
+
+  To this end, we now have arch/arm/mach-$(MACHINE) directories which are
+  designed to house the non-driver files for a particular machine (eg, PCI,
+  memory management, architecture definitions etc).  For all future
+  machines, there should be a corresponding arch/arm/mach-$(MACHINE)/include/mach
+  directory.
+
+
+Modules
+-------
+
+  Although modularisation is supported (and required for the FP emulator),
+  each module on an ARM2/ARM250/ARM3 machine when is loaded will take
+  memory up to the next 32k boundary due to the size of the pages.
+  Therefore, is modularisation on these machines really worth it?
+
+  However, ARM6 and up machines allow modules to take multiples of 4k, and
+  as such Acorn RiscPCs and other architectures using these processors can
+  make good use of modularisation.
+
+
+ADFS Image files
+----------------
+
+  You can access image files on your ADFS partitions by mounting the ADFS
+  partition, and then using the loopback device driver.  You must have
+  losetup installed.
+
+  Please note that the PCEmulator DOS partitions have a partition table at
+  the start, and as such, you will have to give '-o offset' to losetup.
+
+
+Request to developers
+---------------------
+
+  When writing device drivers which include a separate assembler file, please
+  include it in with the C file, and not the arch/arm/lib directory.  This
+  allows the driver to be compiled as a loadable module without requiring
+  half the code to be compiled into the kernel image.
+
+  In general, try to avoid using assembler unless it is really necessary.  It
+  makes drivers far less easy to port to other hardware.
+
+
+ST506 hard drives
+-----------------
+
+  The ST506 hard drive controllers seem to be working fine (if a little
+  slowly).  At the moment they will only work off the controllers on an
+  A4x0's motherboard, but for it to work off a Podule just requires
+  someone with a podule to add the addresses for the IRQ mask and the
+  HDC base to the source.
+
+  As of 31/3/96 it works with two drives (you should get the ADFS
+  `*configure` harddrive set to 2). I've got an internal 20MB and a great
+  big external 5.25" FH 64MB drive (who could ever want more :-) ).
+
+  I've just got 240K/s off it (a dd with bs=128k); thats about half of what
+  RiscOS gets; but it's a heck of a lot better than the 50K/s I was getting
+  last week :-)
+
+  Known bug: Drive data errors can cause a hang; including cases where
+  the controller has fixed the error using ECC. (Possibly ONLY
+  in that case...hmm).
+
+
+1772 Floppy
+-----------
+  This also seems to work OK, but hasn't been stressed much lately.  It
+  hasn't got any code for disc change detection in there at the moment which
+  could be a bit of a problem!  Suggestions on the correct way to do this
+  are welcome.
+
+
+`CONFIG_MACH_` and `CONFIG_ARCH_`
+---------------------------------
+  A change was made in 2003 to the macro names for new machines.
+  Historically, `CONFIG_ARCH_` was used for the bonafide architecture,
+  e.g. SA1100, as well as implementations of the architecture,
+  e.g. Assabet.  It was decided to change the implementation macros
+  to read `CONFIG_MACH_` for clarity.  Moreover, a retroactive fixup has
+  not been made because it would complicate patching.
+
+  Previous registrations may be found online.
+
+    <http://www.arm.linux.org.uk/developer/machines/>
+
+Kernel entry (head.S)
+---------------------
+  The initial entry into the kernel is via head.S, which uses machine
+  independent code.  The machine is selected by the value of 'r1' on
+  entry, which must be kept unique.
+
+  Due to the large number of machines which the ARM port of Linux provides
+  for, we have a method to manage this which ensures that we don't end up
+  duplicating large amounts of code.
+
+  We group machine (or platform) support code into machine classes.  A
+  class typically based around one or more system on a chip devices, and
+  acts as a natural container around the actual implementations.  These
+  classes are given directories - arch/arm/mach-<class> - which contain
+  the source files and include/mach/ to support the machine class.
+
+  For example, the SA1100 class is based upon the SA1100 and SA1110 SoC
+  devices, and contains the code to support the way the on-board and off-
+  board devices are used, or the device is setup, and provides that
+  machine specific "personality."
+
+  For platforms that support device tree (DT), the machine selection is
+  controlled at runtime by passing the device tree blob to the kernel.  At
+  compile-time, support for the machine type must be selected.  This allows for
+  a single multiplatform kernel build to be used for several machine types.
+
+  For platforms that do not use device tree, this machine selection is
+  controlled by the machine type ID, which acts both as a run-time and a
+  compile-time code selection method.  You can register a new machine via the
+  web site at:
+
+    <http://www.arm.linux.org.uk/developer/machines/>
+
+  Note: Please do not register a machine type for DT-only platforms.  If your
+  platform is DT-only, you do not need a registered machine type.
+
+---
+
+Russell King (15/03/2004)
diff --git a/Documentation/arch/arm/booting.rst b/Documentation/arch/arm/booting.rst
new file mode 100644
index 0000000000000..5974e37b3d202
--- /dev/null
+++ b/Documentation/arch/arm/booting.rst
@@ -0,0 +1,237 @@
+=================
+Booting ARM Linux
+=================
+
+Author:	Russell King
+
+Date  : 18 May 2002
+
+The following documentation is relevant to 2.4.18-rmk6 and beyond.
+
+In order to boot ARM Linux, you require a boot loader, which is a small
+program that runs before the main kernel.  The boot loader is expected
+to initialise various devices, and eventually call the Linux kernel,
+passing information to the kernel.
+
+Essentially, the boot loader should provide (as a minimum) the
+following:
+
+1. Setup and initialise the RAM.
+2. Initialise one serial port.
+3. Detect the machine type.
+4. Setup the kernel tagged list.
+5. Load initramfs.
+6. Call the kernel image.
+
+
+1. Setup and initialise RAM
+---------------------------
+
+Existing boot loaders:
+	MANDATORY
+New boot loaders:
+	MANDATORY
+
+The boot loader is expected to find and initialise all RAM that the
+kernel will use for volatile data storage in the system.  It performs
+this in a machine dependent manner.  (It may use internal algorithms
+to automatically locate and size all RAM, or it may use knowledge of
+the RAM in the machine, or any other method the boot loader designer
+sees fit.)
+
+
+2. Initialise one serial port
+-----------------------------
+
+Existing boot loaders:
+	OPTIONAL, RECOMMENDED
+New boot loaders:
+	OPTIONAL, RECOMMENDED
+
+The boot loader should initialise and enable one serial port on the
+target.  This allows the kernel serial driver to automatically detect
+which serial port it should use for the kernel console (generally
+used for debugging purposes, or communication with the target.)
+
+As an alternative, the boot loader can pass the relevant 'console='
+option to the kernel via the tagged lists specifying the port, and
+serial format options as described in
+
+       Documentation/admin-guide/kernel-parameters.rst.
+
+
+3. Detect the machine type
+--------------------------
+
+Existing boot loaders:
+	OPTIONAL
+New boot loaders:
+	MANDATORY except for DT-only platforms
+
+The boot loader should detect the machine type its running on by some
+method.  Whether this is a hard coded value or some algorithm that
+looks at the connected hardware is beyond the scope of this document.
+The boot loader must ultimately be able to provide a MACH_TYPE_xxx
+value to the kernel. (see linux/arch/arm/tools/mach-types).  This
+should be passed to the kernel in register r1.
+
+For DT-only platforms, the machine type will be determined by device
+tree.  set the machine type to all ones (~0).  This is not strictly
+necessary, but assures that it will not match any existing types.
+
+4. Setup boot data
+------------------
+
+Existing boot loaders:
+	OPTIONAL, HIGHLY RECOMMENDED
+New boot loaders:
+	MANDATORY
+
+The boot loader must provide either a tagged list or a dtb image for
+passing configuration data to the kernel.  The physical address of the
+boot data is passed to the kernel in register r2.
+
+4a. Setup the kernel tagged list
+--------------------------------
+
+The boot loader must create and initialise the kernel tagged list.
+A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE.
+The ATAG_CORE tag may or may not be empty.  An empty ATAG_CORE tag
+has the size field set to '2' (0x00000002).  The ATAG_NONE must set
+the size field to zero.
+
+Any number of tags can be placed in the list.  It is undefined
+whether a repeated tag appends to the information carried by the
+previous tag, or whether it replaces the information in its
+entirety; some tags behave as the former, others the latter.
+
+The boot loader must pass at a minimum the size and location of
+the system memory, and root filesystem location.  Therefore, the
+minimum tagged list should look::
+
+		+-----------+
+  base ->	| ATAG_CORE |  |
+		+-----------+  |
+		| ATAG_MEM  |  | increasing address
+		+-----------+  |
+		| ATAG_NONE |  |
+		+-----------+  v
+
+The tagged list should be stored in system RAM.
+
+The tagged list must be placed in a region of memory where neither
+the kernel decompressor nor initrd 'bootp' program will overwrite
+it.  The recommended placement is in the first 16KiB of RAM.
+
+4b. Setup the device tree
+-------------------------
+
+The boot loader must load a device tree image (dtb) into system ram
+at a 64bit aligned address and initialize it with the boot data.  The
+dtb format is documented at https://www.devicetree.org/specifications/.
+The kernel will look for the dtb magic value of 0xd00dfeed at the dtb
+physical address to determine if a dtb has been passed instead of a
+tagged list.
+
+The boot loader must pass at a minimum the size and location of the
+system memory, and the root filesystem location.  The dtb must be
+placed in a region of memory where the kernel decompressor will not
+overwrite it, while remaining within the region which will be covered
+by the kernel's low-memory mapping.
+
+A safe location is just above the 128MiB boundary from start of RAM.
+
+5. Load initramfs.
+------------------
+
+Existing boot loaders:
+	OPTIONAL
+New boot loaders:
+	OPTIONAL
+
+If an initramfs is in use then, as with the dtb, it must be placed in
+a region of memory where the kernel decompressor will not overwrite it
+while also with the region which will be covered by the kernel's
+low-memory mapping.
+
+A safe location is just above the device tree blob which itself will
+be loaded just above the 128MiB boundary from the start of RAM as
+recommended above.
+
+6. Calling the kernel image
+---------------------------
+
+Existing boot loaders:
+	MANDATORY
+New boot loaders:
+	MANDATORY
+
+There are two options for calling the kernel zImage.  If the zImage
+is stored in flash, and is linked correctly to be run from flash,
+then it is legal for the boot loader to call the zImage in flash
+directly.
+
+The zImage may also be placed in system RAM and called there.  The
+kernel should be placed in the first 128MiB of RAM.  It is recommended
+that it is loaded above 32MiB in order to avoid the need to relocate
+prior to decompression, which will make the boot process slightly
+faster.
+
+When booting a raw (non-zImage) kernel the constraints are tighter.
+In this case the kernel must be loaded at an offset into system equal
+to TEXT_OFFSET - PAGE_OFFSET.
+
+In any case, the following conditions must be met:
+
+- Quiesce all DMA capable devices so that memory does not get
+  corrupted by bogus network packets or disk data. This will save
+  you many hours of debug.
+
+- CPU register settings
+
+  - r0 = 0,
+  - r1 = machine type number discovered in (3) above.
+  - r2 = physical address of tagged list in system RAM, or
+    physical address of device tree block (dtb) in system RAM
+
+- CPU mode
+
+  All forms of interrupts must be disabled (IRQs and FIQs)
+
+  For CPUs which do not include the ARM virtualization extensions, the
+  CPU must be in SVC mode.  (A special exception exists for Angel)
+
+  CPUs which include support for the virtualization extensions can be
+  entered in HYP mode in order to enable the kernel to make full use of
+  these extensions.  This is the recommended boot method for such CPUs,
+  unless the virtualisations are already in use by a pre-installed
+  hypervisor.
+
+  If the kernel is not entered in HYP mode for any reason, it must be
+  entered in SVC mode.
+
+- Caches, MMUs
+
+  The MMU must be off.
+
+  Instruction cache may be on or off.
+
+  Data cache must be off.
+
+  If the kernel is entered in HYP mode, the above requirements apply to
+  the HYP mode configuration in addition to the ordinary PL1 (privileged
+  kernel modes) configuration.  In addition, all traps into the
+  hypervisor must be disabled, and PL1 access must be granted for all
+  peripherals and CPU resources for which this is architecturally
+  possible.  Except for entering in HYP mode, the system configuration
+  should be such that a kernel which does not include support for the
+  virtualization extensions can boot correctly without extra help.
+
+- The boot loader is expected to call the kernel image by jumping
+  directly to the first instruction of the kernel image.
+
+  On CPUs supporting the ARM instruction set, the entry must be
+  made in ARM state, even for a Thumb-2 kernel.
+
+  On CPUs supporting only the Thumb instruction set such as
+  Cortex-M class CPUs, the entry must be made in Thumb state.
diff --git a/Documentation/arch/arm/cluster-pm-race-avoidance.rst b/Documentation/arch/arm/cluster-pm-race-avoidance.rst
new file mode 100644
index 0000000000000..aa58603d3f28b
--- /dev/null
+++ b/Documentation/arch/arm/cluster-pm-race-avoidance.rst
@@ -0,0 +1,533 @@
+=========================================================
+Cluster-wide Power-up/power-down race avoidance algorithm
+=========================================================
+
+This file documents the algorithm which is used to coordinate CPU and
+cluster setup and teardown operations and to manage hardware coherency
+controls safely.
+
+The section "Rationale" explains what the algorithm is for and why it is
+needed.  "Basic model" explains general concepts using a simplified view
+of the system.  The other sections explain the actual details of the
+algorithm in use.
+
+
+Rationale
+---------
+
+In a system containing multiple CPUs, it is desirable to have the
+ability to turn off individual CPUs when the system is idle, reducing
+power consumption and thermal dissipation.
+
+In a system containing multiple clusters of CPUs, it is also desirable
+to have the ability to turn off entire clusters.
+
+Turning entire clusters off and on is a risky business, because it
+involves performing potentially destructive operations affecting a group
+of independently running CPUs, while the OS continues to run.  This
+means that we need some coordination in order to ensure that critical
+cluster-level operations are only performed when it is truly safe to do
+so.
+
+Simple locking may not be sufficient to solve this problem, because
+mechanisms like Linux spinlocks may rely on coherency mechanisms which
+are not immediately enabled when a cluster powers up.  Since enabling or
+disabling those mechanisms may itself be a non-atomic operation (such as
+writing some hardware registers and invalidating large caches), other
+methods of coordination are required in order to guarantee safe
+power-down and power-up at the cluster level.
+
+The mechanism presented in this document describes a coherent memory
+based protocol for performing the needed coordination.  It aims to be as
+lightweight as possible, while providing the required safety properties.
+
+
+Basic model
+-----------
+
+Each cluster and CPU is assigned a state, as follows:
+
+	- DOWN
+	- COMING_UP
+	- UP
+	- GOING_DOWN
+
+::
+
+	    +---------> UP ----------+
+	    |                        v
+
+	COMING_UP                GOING_DOWN
+
+	    ^                        |
+	    +--------- DOWN <--------+
+
+
+DOWN:
+	The CPU or cluster is not coherent, and is either powered off or
+	suspended, or is ready to be powered off or suspended.
+
+COMING_UP:
+	The CPU or cluster has committed to moving to the UP state.
+	It may be part way through the process of initialisation and
+	enabling coherency.
+
+UP:
+	The CPU or cluster is active and coherent at the hardware
+	level.  A CPU in this state is not necessarily being used
+	actively by the kernel.
+
+GOING_DOWN:
+	The CPU or cluster has committed to moving to the DOWN
+	state.  It may be part way through the process of teardown and
+	coherency exit.
+
+
+Each CPU has one of these states assigned to it at any point in time.
+The CPU states are described in the "CPU state" section, below.
+
+Each cluster is also assigned a state, but it is necessary to split the
+state value into two parts (the "cluster" state and "inbound" state) and
+to introduce additional states in order to avoid races between different
+CPUs in the cluster simultaneously modifying the state.  The cluster-
+level states are described in the "Cluster state" section.
+
+To help distinguish the CPU states from cluster states in this
+discussion, the state names are given a `CPU_` prefix for the CPU states,
+and a `CLUSTER_` or `INBOUND_` prefix for the cluster states.
+
+
+CPU state
+---------
+
+In this algorithm, each individual core in a multi-core processor is
+referred to as a "CPU".  CPUs are assumed to be single-threaded:
+therefore, a CPU can only be doing one thing at a single point in time.
+
+This means that CPUs fit the basic model closely.
+
+The algorithm defines the following states for each CPU in the system:
+
+	- CPU_DOWN
+	- CPU_COMING_UP
+	- CPU_UP
+	- CPU_GOING_DOWN
+
+::
+
+	 cluster setup and
+	CPU setup complete          policy decision
+	      +-----------> CPU_UP ------------+
+	      |                                v
+
+	CPU_COMING_UP                   CPU_GOING_DOWN
+
+	      ^                                |
+	      +----------- CPU_DOWN <----------+
+	 policy decision           CPU teardown complete
+	or hardware event
+
+
+The definitions of the four states correspond closely to the states of
+the basic model.
+
+Transitions between states occur as follows.
+
+A trigger event (spontaneous) means that the CPU can transition to the
+next state as a result of making local progress only, with no
+requirement for any external event to happen.
+
+
+CPU_DOWN:
+	A CPU reaches the CPU_DOWN state when it is ready for
+	power-down.  On reaching this state, the CPU will typically
+	power itself down or suspend itself, via a WFI instruction or a
+	firmware call.
+
+	Next state:
+		CPU_COMING_UP
+	Conditions:
+		none
+
+	Trigger events:
+		a) an explicit hardware power-up operation, resulting
+		   from a policy decision on another CPU;
+
+		b) a hardware event, such as an interrupt.
+
+
+CPU_COMING_UP:
+	A CPU cannot start participating in hardware coherency until the
+	cluster is set up and coherent.  If the cluster is not ready,
+	then the CPU will wait in the CPU_COMING_UP state until the
+	cluster has been set up.
+
+	Next state:
+		CPU_UP
+	Conditions:
+		The CPU's parent cluster must be in CLUSTER_UP.
+	Trigger events:
+		Transition of the parent cluster to CLUSTER_UP.
+
+	Refer to the "Cluster state" section for a description of the
+	CLUSTER_UP state.
+
+
+CPU_UP:
+	When a CPU reaches the CPU_UP state, it is safe for the CPU to
+	start participating in local coherency.
+
+	This is done by jumping to the kernel's CPU resume code.
+
+	Note that the definition of this state is slightly different
+	from the basic model definition: CPU_UP does not mean that the
+	CPU is coherent yet, but it does mean that it is safe to resume
+	the kernel.  The kernel handles the rest of the resume
+	procedure, so the remaining steps are not visible as part of the
+	race avoidance algorithm.
+
+	The CPU remains in this state until an explicit policy decision
+	is made to shut down or suspend the CPU.
+
+	Next state:
+		CPU_GOING_DOWN
+	Conditions:
+		none
+	Trigger events:
+		explicit policy decision
+
+
+CPU_GOING_DOWN:
+	While in this state, the CPU exits coherency, including any
+	operations required to achieve this (such as cleaning data
+	caches).
+
+	Next state:
+		CPU_DOWN
+	Conditions:
+		local CPU teardown complete
+	Trigger events:
+		(spontaneous)
+
+
+Cluster state
+-------------
+
+A cluster is a group of connected CPUs with some common resources.
+Because a cluster contains multiple CPUs, it can be doing multiple
+things at the same time.  This has some implications.  In particular, a
+CPU can start up while another CPU is tearing the cluster down.
+
+In this discussion, the "outbound side" is the view of the cluster state
+as seen by a CPU tearing the cluster down.  The "inbound side" is the
+view of the cluster state as seen by a CPU setting the CPU up.
+
+In order to enable safe coordination in such situations, it is important
+that a CPU which is setting up the cluster can advertise its state
+independently of the CPU which is tearing down the cluster.  For this
+reason, the cluster state is split into two parts:
+
+	"cluster" state: The global state of the cluster; or the state
+	on the outbound side:
+
+		- CLUSTER_DOWN
+		- CLUSTER_UP
+		- CLUSTER_GOING_DOWN
+
+	"inbound" state: The state of the cluster on the inbound side.
+
+		- INBOUND_NOT_COMING_UP
+		- INBOUND_COMING_UP
+
+
+	The different pairings of these states results in six possible
+	states for the cluster as a whole::
+
+	                            CLUSTER_UP
+	          +==========> INBOUND_NOT_COMING_UP -------------+
+	          #                                               |
+	                                                          |
+	     CLUSTER_UP     <----+                                |
+	  INBOUND_COMING_UP      |                                v
+
+	          ^             CLUSTER_GOING_DOWN       CLUSTER_GOING_DOWN
+	          #              INBOUND_COMING_UP <=== INBOUND_NOT_COMING_UP
+
+	    CLUSTER_DOWN         |                                |
+	  INBOUND_COMING_UP <----+                                |
+	                                                          |
+	          ^                                               |
+	          +===========     CLUSTER_DOWN      <------------+
+	                       INBOUND_NOT_COMING_UP
+
+	Transitions -----> can only be made by the outbound CPU, and
+	only involve changes to the "cluster" state.
+
+	Transitions ===##> can only be made by the inbound CPU, and only
+	involve changes to the "inbound" state, except where there is no
+	further transition possible on the outbound side (i.e., the
+	outbound CPU has put the cluster into the CLUSTER_DOWN state).
+
+	The race avoidance algorithm does not provide a way to determine
+	which exact CPUs within the cluster play these roles.  This must
+	be decided in advance by some other means.  Refer to the section
+	"Last man and first man selection" for more explanation.
+
+
+	CLUSTER_DOWN/INBOUND_NOT_COMING_UP is the only state where the
+	cluster can actually be powered down.
+
+	The parallelism of the inbound and outbound CPUs is observed by
+	the existence of two different paths from CLUSTER_GOING_DOWN/
+	INBOUND_NOT_COMING_UP (corresponding to GOING_DOWN in the basic
+	model) to CLUSTER_DOWN/INBOUND_COMING_UP (corresponding to
+	COMING_UP in the basic model).  The second path avoids cluster
+	teardown completely.
+
+	CLUSTER_UP/INBOUND_COMING_UP is equivalent to UP in the basic
+	model.  The final transition to CLUSTER_UP/INBOUND_NOT_COMING_UP
+	is trivial and merely resets the state machine ready for the
+	next cycle.
+
+	Details of the allowable transitions follow.
+
+	The next state in each case is notated
+
+		<cluster state>/<inbound state> (<transitioner>)
+
+	where the <transitioner> is the side on which the transition
+	can occur; either the inbound or the outbound side.
+
+
+CLUSTER_DOWN/INBOUND_NOT_COMING_UP:
+	Next state:
+		CLUSTER_DOWN/INBOUND_COMING_UP (inbound)
+	Conditions:
+		none
+
+	Trigger events:
+		a) an explicit hardware power-up operation, resulting
+		   from a policy decision on another CPU;
+
+		b) a hardware event, such as an interrupt.
+
+
+CLUSTER_DOWN/INBOUND_COMING_UP:
+
+	In this state, an inbound CPU sets up the cluster, including
+	enabling of hardware coherency at the cluster level and any
+	other operations (such as cache invalidation) which are required
+	in order to achieve this.
+
+	The purpose of this state is to do sufficient cluster-level
+	setup to enable other CPUs in the cluster to enter coherency
+	safely.
+
+	Next state:
+		CLUSTER_UP/INBOUND_COMING_UP (inbound)
+	Conditions:
+		cluster-level setup and hardware coherency complete
+	Trigger events:
+		(spontaneous)
+
+
+CLUSTER_UP/INBOUND_COMING_UP:
+
+	Cluster-level setup is complete and hardware coherency is
+	enabled for the cluster.  Other CPUs in the cluster can safely
+	enter coherency.
+
+	This is a transient state, leading immediately to
+	CLUSTER_UP/INBOUND_NOT_COMING_UP.  All other CPUs on the cluster
+	should consider treat these two states as equivalent.
+
+	Next state:
+		CLUSTER_UP/INBOUND_NOT_COMING_UP (inbound)
+	Conditions:
+		none
+	Trigger events:
+		(spontaneous)
+
+
+CLUSTER_UP/INBOUND_NOT_COMING_UP:
+
+	Cluster-level setup is complete and hardware coherency is
+	enabled for the cluster.  Other CPUs in the cluster can safely
+	enter coherency.
+
+	The cluster will remain in this state until a policy decision is
+	made to power the cluster down.
+
+	Next state:
+		CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP (outbound)
+	Conditions:
+		none
+	Trigger events:
+		policy decision to power down the cluster
+
+
+CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP:
+
+	An outbound CPU is tearing the cluster down.  The selected CPU
+	must wait in this state until all CPUs in the cluster are in the
+	CPU_DOWN state.
+
+	When all CPUs are in the CPU_DOWN state, the cluster can be torn
+	down, for example by cleaning data caches and exiting
+	cluster-level coherency.
+
+	To avoid wasteful unnecessary teardown operations, the outbound
+	should check the inbound cluster state for asynchronous
+	transitions to INBOUND_COMING_UP.  Alternatively, individual
+	CPUs can be checked for entry into CPU_COMING_UP or CPU_UP.
+
+
+	Next states:
+
+	CLUSTER_DOWN/INBOUND_NOT_COMING_UP (outbound)
+		Conditions:
+			cluster torn down and ready to power off
+		Trigger events:
+			(spontaneous)
+
+	CLUSTER_GOING_DOWN/INBOUND_COMING_UP (inbound)
+		Conditions:
+			none
+
+		Trigger events:
+			a) an explicit hardware power-up operation,
+			   resulting from a policy decision on another
+			   CPU;
+
+			b) a hardware event, such as an interrupt.
+
+
+CLUSTER_GOING_DOWN/INBOUND_COMING_UP:
+
+	The cluster is (or was) being torn down, but another CPU has
+	come online in the meantime and is trying to set up the cluster
+	again.
+
+	If the outbound CPU observes this state, it has two choices:
+
+		a) back out of teardown, restoring the cluster to the
+		   CLUSTER_UP state;
+
+		b) finish tearing the cluster down and put the cluster
+		   in the CLUSTER_DOWN state; the inbound CPU will
+		   set up the cluster again from there.
+
+	Choice (a) permits the removal of some latency by avoiding
+	unnecessary teardown and setup operations in situations where
+	the cluster is not really going to be powered down.
+
+
+	Next states:
+
+	CLUSTER_UP/INBOUND_COMING_UP (outbound)
+		Conditions:
+				cluster-level setup and hardware
+				coherency complete
+
+		Trigger events:
+				(spontaneous)
+
+	CLUSTER_DOWN/INBOUND_COMING_UP (outbound)
+		Conditions:
+			cluster torn down and ready to power off
+
+		Trigger events:
+			(spontaneous)
+
+
+Last man and First man selection
+--------------------------------
+
+The CPU which performs cluster tear-down operations on the outbound side
+is commonly referred to as the "last man".
+
+The CPU which performs cluster setup on the inbound side is commonly
+referred to as the "first man".
+
+The race avoidance algorithm documented above does not provide a
+mechanism to choose which CPUs should play these roles.
+
+
+Last man:
+
+When shutting down the cluster, all the CPUs involved are initially
+executing Linux and hence coherent.  Therefore, ordinary spinlocks can
+be used to select a last man safely, before the CPUs become
+non-coherent.
+
+
+First man:
+
+Because CPUs may power up asynchronously in response to external wake-up
+events, a dynamic mechanism is needed to make sure that only one CPU
+attempts to play the first man role and do the cluster-level
+initialisation: any other CPUs must wait for this to complete before
+proceeding.
+
+Cluster-level initialisation may involve actions such as configuring
+coherency controls in the bus fabric.
+
+The current implementation in mcpm_head.S uses a separate mutual exclusion
+mechanism to do this arbitration.  This mechanism is documented in
+detail in vlocks.txt.
+
+
+Features and Limitations
+------------------------
+
+Implementation:
+
+	The current ARM-based implementation is split between
+	arch/arm/common/mcpm_head.S (low-level inbound CPU operations) and
+	arch/arm/common/mcpm_entry.c (everything else):
+
+	__mcpm_cpu_going_down() signals the transition of a CPU to the
+	CPU_GOING_DOWN state.
+
+	__mcpm_cpu_down() signals the transition of a CPU to the CPU_DOWN
+	state.
+
+	A CPU transitions to CPU_COMING_UP and then to CPU_UP via the
+	low-level power-up code in mcpm_head.S.  This could
+	involve CPU-specific setup code, but in the current
+	implementation it does not.
+
+	__mcpm_outbound_enter_critical() and __mcpm_outbound_leave_critical()
+	handle transitions from CLUSTER_UP to CLUSTER_GOING_DOWN
+	and from there to CLUSTER_DOWN or back to CLUSTER_UP (in
+	the case of an aborted cluster power-down).
+
+	These functions are more complex than the __mcpm_cpu_*()
+	functions due to the extra inter-CPU coordination which
+	is needed for safe transitions at the cluster level.
+
+	A cluster transitions from CLUSTER_DOWN back to CLUSTER_UP via
+	the low-level power-up code in mcpm_head.S.  This
+	typically involves platform-specific setup code,
+	provided by the platform-specific power_up_setup
+	function registered via mcpm_sync_init.
+
+Deep topologies:
+
+	As currently described and implemented, the algorithm does not
+	support CPU topologies involving more than two levels (i.e.,
+	clusters of clusters are not supported).  The algorithm could be
+	extended by replicating the cluster-level states for the
+	additional topological levels, and modifying the transition
+	rules for the intermediate (non-outermost) cluster levels.
+
+
+Colophon
+--------
+
+Originally created and documented by Dave Martin for Linaro Limited, in
+collaboration with Nicolas Pitre and Achin Gupta.
+
+Copyright (C) 2012-2013  Linaro Limited
+Distributed under the terms of Version 2 of the GNU General Public
+License, as defined in linux/COPYING.
diff --git a/Documentation/arch/arm/features.rst b/Documentation/arch/arm/features.rst
new file mode 100644
index 0000000000000..7414ec03dd157
--- /dev/null
+++ b/Documentation/arch/arm/features.rst
@@ -0,0 +1,3 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. kernel-feat:: $srctree/Documentation/features arm
diff --git a/Documentation/arch/arm/firmware.rst b/Documentation/arch/arm/firmware.rst
new file mode 100644
index 0000000000000..efd844baec1da
--- /dev/null
+++ b/Documentation/arch/arm/firmware.rst
@@ -0,0 +1,72 @@
+==========================================================================
+Interface for registering and calling firmware-specific operations for ARM
+==========================================================================
+
+Written by Tomasz Figa <t.figa@samsung.com>
+
+Some boards are running with secure firmware running in TrustZone secure
+world, which changes the way some things have to be initialized. This makes
+a need to provide an interface for such platforms to specify available firmware
+operations and call them when needed.
+
+Firmware operations can be specified by filling in a struct firmware_ops
+with appropriate callbacks and then registering it with register_firmware_ops()
+function::
+
+	void register_firmware_ops(const struct firmware_ops *ops)
+
+The ops pointer must be non-NULL. More information about struct firmware_ops
+and its members can be found in arch/arm/include/asm/firmware.h header.
+
+There is a default, empty set of operations provided, so there is no need to
+set anything if platform does not require firmware operations.
+
+To call a firmware operation, a helper macro is provided::
+
+	#define call_firmware_op(op, ...)				\
+		((firmware_ops->op) ? firmware_ops->op(__VA_ARGS__) : (-ENOSYS))
+
+the macro checks if the operation is provided and calls it or otherwise returns
+-ENOSYS to signal that given operation is not available (for example, to allow
+fallback to legacy operation).
+
+Example of registering firmware operations::
+
+	/* board file */
+
+	static int platformX_do_idle(void)
+	{
+		/* tell platformX firmware to enter idle */
+		return 0;
+	}
+
+	static int platformX_cpu_boot(int i)
+	{
+		/* tell platformX firmware to boot CPU i */
+		return 0;
+	}
+
+	static const struct firmware_ops platformX_firmware_ops = {
+		.do_idle        = exynos_do_idle,
+		.cpu_boot       = exynos_cpu_boot,
+		/* other operations not available on platformX */
+	};
+
+	/* init_early callback of machine descriptor */
+	static void __init board_init_early(void)
+	{
+		register_firmware_ops(&platformX_firmware_ops);
+	}
+
+Example of using a firmware operation::
+
+	/* some platform code, e.g. SMP initialization */
+
+	__raw_writel(__pa_symbol(exynos4_secondary_startup),
+		CPU1_BOOT_REG);
+
+	/* Call Exynos specific smc call */
+	if (call_firmware_op(cpu_boot, cpu) == -ENOSYS)
+		cpu_boot_legacy(...); /* Try legacy way */
+
+	gic_raise_softirq(cpumask_of(cpu), 1);
diff --git a/Documentation/arch/arm/google/chromebook-boot-flow.rst b/Documentation/arch/arm/google/chromebook-boot-flow.rst
new file mode 100644
index 0000000000000..36da77684bba7
--- /dev/null
+++ b/Documentation/arch/arm/google/chromebook-boot-flow.rst
@@ -0,0 +1,69 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Chromebook Boot Flow
+======================================
+
+Most recent Chromebooks that use device tree are using the opensource
+depthcharge_ bootloader. Depthcharge_ expects the OS to be packaged as a `FIT
+Image`_ which contains an OS image as well as a collection of device trees. It
+is up to depthcharge_ to pick the right device tree from the `FIT Image`_ and
+provide it to the OS.
+
+The scheme that depthcharge_ uses to pick the device tree takes into account
+three variables:
+
+- Board name, specified at depthcharge_ compile time. This is $(BOARD) below.
+- Board revision number, determined at runtime (perhaps by reading GPIO
+  strappings, perhaps via some other method). This is $(REV) below.
+- SKU number, read from GPIO strappings at boot time. This is $(SKU) below.
+
+For recent Chromebooks, depthcharge_ creates a match list that looks like this:
+
+- google,$(BOARD)-rev$(REV)-sku$(SKU)
+- google,$(BOARD)-rev$(REV)
+- google,$(BOARD)-sku$(SKU)
+- google,$(BOARD)
+
+Note that some older Chromebooks use a slightly different list that may
+not include SKU matching or may prioritize SKU/rev differently.
+
+Note that for some boards there may be extra board-specific logic to inject
+extra compatibles into the list, but this is uncommon.
+
+Depthcharge_ will look through all device trees in the `FIT Image`_ trying to
+find one that matches the most specific compatible. It will then look
+through all device trees in the `FIT Image`_ trying to find the one that
+matches the *second most* specific compatible, etc.
+
+When searching for a device tree, depthcharge_ doesn't care where the
+compatible string falls within a device tree's root compatible string array.
+As an example, if we're on board "lazor", rev 4, SKU 0 and we have two device
+trees:
+
+- "google,lazor-rev5-sku0", "google,lazor-rev4-sku0", "qcom,sc7180"
+- "google,lazor", "qcom,sc7180"
+
+Then depthcharge_ will pick the first device tree even though
+"google,lazor-rev4-sku0" was the second compatible listed in that device tree.
+This is because it is a more specific compatible than "google,lazor".
+
+It should be noted that depthcharge_ does not have any smarts to try to
+match board or SKU revisions that are "close by". That is to say that
+if depthcharge_ knows it's on "rev4" of a board but there is no "rev4"
+device tree then depthcharge_ *won't* look for a "rev3" device tree.
+
+In general when any significant changes are made to a board the board
+revision number is increased even if none of those changes need to
+be reflected in the device tree. Thus it's fairly common to see device
+trees with multiple revisions.
+
+It should be noted that, taking into account the above system that
+depthcharge_ has, the most flexibility is achieved if the device tree
+supporting the newest revision(s) of a board omits the "-rev{REV}"
+compatible strings. When this is done then if you get a new board
+revision and try to run old software on it then we'll at pick the
+newest device tree we know about.
+
+.. _depthcharge: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/depthcharge/
+.. _`FIT Image`: https://doc.coreboot.org/lib/payloads/fit.html
diff --git a/Documentation/arch/arm/index.rst b/Documentation/arch/arm/index.rst
new file mode 100644
index 0000000000000..fd43502ae9246
--- /dev/null
+++ b/Documentation/arch/arm/index.rst
@@ -0,0 +1,85 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+ARM Architecture
+================
+
+.. toctree::
+   :maxdepth: 1
+
+   arm
+   booting
+   cluster-pm-race-avoidance
+   firmware
+   interrupts
+   kernel_mode_neon
+   kernel_user_helpers
+   memory
+   mem_alignment
+   tcm
+   setup
+   swp_emulation
+   uefi
+   vlocks
+   porting
+
+   features
+
+SoC-specific documents
+======================
+
+.. toctree::
+   :maxdepth: 1
+
+   google/chromebook-boot-flow
+
+   ixp4xx
+
+   marvell
+   microchip
+
+   netwinder
+   nwfpe/index
+
+   keystone/overview
+   keystone/knav-qmss
+
+   omap/index
+
+   pxa/mfp
+
+
+   sa1100/index
+
+   stm32/stm32f746-overview
+   stm32/overview
+   stm32/stm32h743-overview
+   stm32/stm32h750-overview
+   stm32/stm32f769-overview
+   stm32/stm32f429-overview
+   stm32/stm32mp13-overview
+   stm32/stm32mp151-overview
+   stm32/stm32mp157-overview
+   stm32/stm32-dma-mdma-chaining
+
+   sunxi
+
+   samsung/index
+
+   sunxi/clocks
+
+   spear/overview
+
+   sti/stih407-overview
+   sti/stih418-overview
+   sti/overview
+
+   vfp/release-notes
+
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/arch/arm/interrupts.rst b/Documentation/arch/arm/interrupts.rst
new file mode 100644
index 0000000000000..2ae70e0e9732c
--- /dev/null
+++ b/Documentation/arch/arm/interrupts.rst
@@ -0,0 +1,169 @@
+==========
+Interrupts
+==========
+
+2.5.2-rmk5:
+  This is the first kernel that contains a major shake up of some of the
+  major architecture-specific subsystems.
+
+Firstly, it contains some pretty major changes to the way we handle the
+MMU TLB.  Each MMU TLB variant is now handled completely separately -
+we have TLB v3, TLB v4 (without write buffer), TLB v4 (with write buffer),
+and finally TLB v4 (with write buffer, with I TLB invalidate entry).
+There is more assembly code inside each of these functions, mainly to
+allow more flexible TLB handling for the future.
+
+Secondly, the IRQ subsystem.
+
+The 2.5 kernels will be having major changes to the way IRQs are handled.
+Unfortunately, this means that machine types that touch the irq_desc[]
+array (basically all machine types) will break, and this means every
+machine type that we currently have.
+
+Lets take an example.  On the Assabet with Neponset, we have::
+
+                  GPIO25                 IRR:2
+        SA1100 ------------> Neponset -----------> SA1111
+                                         IIR:1
+                                      -----------> USAR
+                                         IIR:0
+                                      -----------> SMC9196
+
+The way stuff currently works, all SA1111 interrupts are mutually
+exclusive of each other - if you're processing one interrupt from the
+SA1111 and another comes in, you have to wait for that interrupt to
+finish processing before you can service the new interrupt.  Eg, an
+IDE PIO-based interrupt on the SA1111 excludes all other SA1111 and
+SMC9196 interrupts until it has finished transferring its multi-sector
+data, which can be a long time.  Note also that since we loop in the
+SA1111 IRQ handler, SA1111 IRQs can hold off SMC9196 IRQs indefinitely.
+
+
+The new approach brings several new ideas...
+
+We introduce the concept of a "parent" and a "child".  For example,
+to the Neponset handler, the "parent" is GPIO25, and the "children"d
+are SA1111, SMC9196 and USAR.
+
+We also bring the idea of an IRQ "chip" (mainly to reduce the size of
+the irqdesc array).  This doesn't have to be a real "IC"; indeed the
+SA11x0 IRQs are handled by two separate "chip" structures, one for
+GPIO0-10, and another for all the rest.  It is just a container for
+the various operations (maybe this'll change to a better name).
+This structure has the following operations::
+
+  struct irqchip {
+          /*
+           * Acknowledge the IRQ.
+           * If this is a level-based IRQ, then it is expected to mask the IRQ
+           * as well.
+           */
+          void (*ack)(unsigned int irq);
+          /*
+           * Mask the IRQ in hardware.
+           */
+          void (*mask)(unsigned int irq);
+          /*
+           * Unmask the IRQ in hardware.
+           */
+          void (*unmask)(unsigned int irq);
+          /*
+           * Re-run the IRQ
+           */
+          void (*rerun)(unsigned int irq);
+          /*
+           * Set the type of the IRQ.
+           */
+          int (*type)(unsigned int irq, unsigned int, type);
+  };
+
+ack
+       - required.  May be the same function as mask for IRQs
+         handled by do_level_IRQ.
+mask
+       - required.
+unmask
+       - required.
+rerun
+       - optional.  Not required if you're using do_level_IRQ for all
+         IRQs that use this 'irqchip'.  Generally expected to re-trigger
+         the hardware IRQ if possible.  If not, may call the handler
+	 directly.
+type
+       - optional.  If you don't support changing the type of an IRQ,
+         it should be null so people can detect if they are unable to
+         set the IRQ type.
+
+For each IRQ, we keep the following information:
+
+        - "disable" depth (number of disable_irq()s without enable_irq()s)
+        - flags indicating what we can do with this IRQ (valid, probe,
+          noautounmask) as before
+        - status of the IRQ (probing, enable, etc)
+        - chip
+        - per-IRQ handler
+        - irqaction structure list
+
+The handler can be one of the 3 standard handlers - "level", "edge" and
+"simple", or your own specific handler if you need to do something special.
+
+The "level" handler is what we currently have - its pretty simple.
+"edge" knows about the brokenness of such IRQ implementations - that you
+need to leave the hardware IRQ enabled while processing it, and queueing
+further IRQ events should the IRQ happen again while processing.  The
+"simple" handler is very basic, and does not perform any hardware
+manipulation, nor state tracking.  This is useful for things like the
+SMC9196 and USAR above.
+
+So, what's changed?
+===================
+
+1. Machine implementations must not write to the irqdesc array.
+
+2. New functions to manipulate the irqdesc array.  The first 4 are expected
+   to be useful only to machine specific code.  The last is recommended to
+   only be used by machine specific code, but may be used in drivers if
+   absolutely necessary.
+
+        set_irq_chip(irq,chip)
+                Set the mask/unmask methods for handling this IRQ
+
+        set_irq_handler(irq,handler)
+                Set the handler for this IRQ (level, edge, simple)
+
+        set_irq_chained_handler(irq,handler)
+                Set a "chained" handler for this IRQ - automatically
+                enables this IRQ (eg, Neponset and SA1111 handlers).
+
+        set_irq_flags(irq,flags)
+                Set the valid/probe/noautoenable flags.
+
+        set_irq_type(irq,type)
+                Set active the IRQ edge(s)/level.  This replaces the
+                SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge()
+                function.  Type should be one of IRQ_TYPE_xxx defined in
+		<linux/irq.h>
+
+3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type.
+
+4. Direct access to SA1111 INTPOL is deprecated.  Use set_irq_type instead.
+
+5. A handler is expected to perform any necessary acknowledgement of the
+   parent IRQ via the correct chip specific function.  For instance, if
+   the SA1111 is directly connected to a SA1110 GPIO, then you should
+   acknowledge the SA1110 IRQ each time you re-read the SA1111 IRQ status.
+
+6. For any child which doesn't have its own IRQ enable/disable controls
+   (eg, SMC9196), the handler must mask or acknowledge the parent IRQ
+   while the child handler is called, and the child handler should be the
+   "simple" handler (not "edge" nor "level").  After the handler completes,
+   the parent IRQ should be unmasked, and the status of all children must
+   be re-checked for pending events.  (see the Neponset IRQ handler for
+   details).
+
+7. fixup_irq() is gone, as is `arch/arm/mach-*/include/mach/irq.h`
+
+Please note that this will not solve all problems - some of them are
+hardware based.  Mixing level-based and edge-based IRQs on the same
+parent signal (eg neponset) is one such area where a software based
+solution can't provide the full answer to low IRQ latency.
diff --git a/Documentation/arch/arm/ixp4xx.rst b/Documentation/arch/arm/ixp4xx.rst
new file mode 100644
index 0000000000000..a57235616294a
--- /dev/null
+++ b/Documentation/arch/arm/ixp4xx.rst
@@ -0,0 +1,173 @@
+===========================================================
+Release Notes for Linux on Intel's IXP4xx Network Processor
+===========================================================
+
+Maintained by Deepak Saxena <dsaxena@plexity.net>
+-------------------------------------------------------------------------
+
+1. Overview
+
+Intel's IXP4xx network processor is a highly integrated SOC that
+is targeted for network applications, though it has become popular
+in industrial control and other areas due to low cost and power
+consumption. The IXP4xx family currently consists of several processors
+that support different network offload functions such as encryption,
+routing, firewalling, etc. The IXP46x family is an updated version which
+supports faster speeds, new memory and flash configurations, and more
+integration such as an on-chip I2C controller.
+
+For more information on the various versions of the CPU, see:
+
+   http://developer.intel.com/design/network/products/npfamily/ixp4xx.htm
+
+Intel also made the IXCP1100 CPU for sometime which is an IXP4xx
+stripped of much of the network intelligence.
+
+2. Linux Support
+
+Linux currently supports the following features on the IXP4xx chips:
+
+- Dual serial ports
+- PCI interface
+- Flash access (MTD/JFFS)
+- I2C through GPIO on IXP42x
+- GPIO for input/output/interrupts
+  See arch/arm/mach-ixp4xx/include/mach/platform.h for access functions.
+- Timers (watchdog, OS)
+
+The following components of the chips are not supported by Linux and
+require the use of Intel's proprietary CSR software:
+
+- USB device interface
+- Network interfaces (HSS, Utopia, NPEs, etc)
+- Network offload functionality
+
+If you need to use any of the above, you need to download Intel's
+software from:
+
+   http://developer.intel.com/design/network/products/npfamily/ixp425.htm
+
+DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPRIETARY
+SOFTWARE.
+
+There are several websites that provide directions/pointers on using
+Intel's software:
+
+   - http://sourceforge.net/projects/ixp4xx-osdg/
+     Open Source Developer's Guide for using uClinux and the Intel libraries
+
+   - http://gatewaymaker.sourceforge.net/
+     Simple one page summary of building a gateway using an IXP425 and Linux
+
+   - http://ixp425.sourceforge.net/
+     ATM device driver for IXP425 that relies on Intel's libraries
+
+3. Known Issues/Limitations
+
+3a. Limited inbound PCI window
+
+The IXP4xx family allows for up to 256MB of memory but the PCI interface
+can only expose 64MB of that memory to the PCI bus. This means that if
+you are running with > 64MB, all PCI buffers outside of the accessible
+range will be bounced using the routines in arch/arm/common/dmabounce.c.
+
+3b. Limited outbound PCI window
+
+IXP4xx provides two methods of accessing PCI memory space:
+
+1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
+   To access PCI via this space, we simply ioremap() the BAR
+   into the kernel and we can use the standard read[bwl]/write[bwl]
+   macros. This is the preffered method due to speed but it
+   limits the system to just 64MB of PCI memory. This can be
+   problamatic if using video cards and other memory-heavy devices.
+
+2) If > 64MB of memory space is required, the IXP4xx can be
+   configured to use indirect registers to access PCI This allows
+   for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus.
+   The disadvantage of this is that every PCI access requires
+   three local register accesses plus a spinlock, but in some
+   cases the performance hit is acceptable. In addition, you cannot
+   mmap() PCI devices in this case due to the indirect nature
+   of the PCI window.
+
+By default, the direct method is used for performance reasons. If
+you need more PCI memory, enable the IXP4XX_INDIRECT_PCI config option.
+
+3c. GPIO as Interrupts
+
+Currently the code only handles level-sensitive GPIO interrupts
+
+4. Supported platforms
+
+ADI Engineering Coyote Gateway Reference Platform
+http://www.adiengineering.com/productsCoyote.html
+
+   The ADI Coyote platform is reference design for those building
+   small residential/office gateways. One NPE is connected to a 10/100
+   interface, one to 4-port 10/100 switch, and the third to and ADSL
+   interface. In addition, it also supports to POTs interfaces connected
+   via SLICs. Note that those are not supported by Linux ATM. Finally,
+   the platform has two mini-PCI slots used for 802.11[bga] cards.
+   Finally, there is an IDE port hanging off the expansion bus.
+
+Gateworks Avila Network Platform
+http://www.gateworks.com/support/overview.php
+
+   The Avila platform is basically and IXDP425 with the 4 PCI slots
+   replaced with mini-PCI slots and a CF IDE interface hanging off
+   the expansion bus.
+
+Intel IXDP425 Development Platform
+http://www.intel.com/design/network/products/npfamily/ixdpg425.htm
+
+   This is Intel's standard reference platform for the IXDP425 and is
+   also known as the Richfield board. It contains 4 PCI slots, 16MB
+   of flash, two 10/100 ports and one ADSL port.
+
+Intel IXDP465 Development Platform
+http://www.intel.com/design/network/products/npfamily/ixdp465.htm
+
+   This is basically an IXDP425 with an IXP465 and 32M of flash instead
+   of just 16.
+
+Intel IXDPG425 Development Platform
+
+   This is basically and ADI Coyote board with a NEC EHCI controller
+   added. One issue with this board is that the mini-PCI slots only
+   have the 3.3v line connected, so you can't use a PCI to mini-PCI
+   adapter with an E100 card. So to NFS root you need to use either
+   the CSR or a WiFi card and a ramdisk that BOOTPs and then does
+   a pivot_root to NFS.
+
+Motorola PrPMC1100 Processor Mezanine Card
+http://www.fountainsys.com
+
+   The PrPMC1100 is based on the IXCP1100 and is meant to plug into
+   and IXP2400/2800 system to act as the system controller. It simply
+   contains a CPU and 16MB of flash on the board and needs to be
+   plugged into a carrier board to function. Currently Linux only
+   supports the Motorola PrPMC carrier board for this platform.
+
+5. TODO LIST
+
+- Add support for Coyote IDE
+- Add support for edge-based GPIO interrupts
+- Add support for CF IDE on expansion bus
+
+6. Thanks
+
+The IXP4xx work has been funded by Intel Corp. and MontaVista Software, Inc.
+
+The following people have contributed patches/comments/etc:
+
+- Lennerty Buytenhek
+- Lutz Jaenicke
+- Justin Mayfield
+- Robert E. Ranslam
+
+[I know I've forgotten others, please email me to be added]
+
+-------------------------------------------------------------------------
+
+Last Update: 01/04/2005
diff --git a/Documentation/arch/arm/kernel_mode_neon.rst b/Documentation/arch/arm/kernel_mode_neon.rst
new file mode 100644
index 0000000000000..9bfb71a2a9b96
--- /dev/null
+++ b/Documentation/arch/arm/kernel_mode_neon.rst
@@ -0,0 +1,124 @@
+================
+Kernel mode NEON
+================
+
+TL;DR summary
+-------------
+* Use only NEON instructions, or VFP instructions that don't rely on support
+  code
+* Isolate your NEON code in a separate compilation unit, and compile it with
+  '-march=armv7-a -mfpu=neon -mfloat-abi=softfp'
+* Put kernel_neon_begin() and kernel_neon_end() calls around the calls into your
+  NEON code
+* Don't sleep in your NEON code, and be aware that it will be executed with
+  preemption disabled
+
+
+Introduction
+------------
+It is possible to use NEON instructions (and in some cases, VFP instructions) in
+code that runs in kernel mode. However, for performance reasons, the NEON/VFP
+register file is not preserved and restored at every context switch or taken
+exception like the normal register file is, so some manual intervention is
+required. Furthermore, special care is required for code that may sleep [i.e.,
+may call schedule()], as NEON or VFP instructions will be executed in a
+non-preemptible section for reasons outlined below.
+
+
+Lazy preserve and restore
+-------------------------
+The NEON/VFP register file is managed using lazy preserve (on UP systems) and
+lazy restore (on both SMP and UP systems). This means that the register file is
+kept 'live', and is only preserved and restored when multiple tasks are
+contending for the NEON/VFP unit (or, in the SMP case, when a task migrates to
+another core). Lazy restore is implemented by disabling the NEON/VFP unit after
+every context switch, resulting in a trap when subsequently a NEON/VFP
+instruction is issued, allowing the kernel to step in and perform the restore if
+necessary.
+
+Any use of the NEON/VFP unit in kernel mode should not interfere with this, so
+it is required to do an 'eager' preserve of the NEON/VFP register file, and
+enable the NEON/VFP unit explicitly so no exceptions are generated on first
+subsequent use. This is handled by the function kernel_neon_begin(), which
+should be called before any kernel mode NEON or VFP instructions are issued.
+Likewise, the NEON/VFP unit should be disabled again after use to make sure user
+mode will hit the lazy restore trap upon next use. This is handled by the
+function kernel_neon_end().
+
+
+Interruptions in kernel mode
+----------------------------
+For reasons of performance and simplicity, it was decided that there shall be no
+preserve/restore mechanism for the kernel mode NEON/VFP register contents. This
+implies that interruptions of a kernel mode NEON section can only be allowed if
+they are guaranteed not to touch the NEON/VFP registers. For this reason, the
+following rules and restrictions apply in the kernel:
+* NEON/VFP code is not allowed in interrupt context;
+* NEON/VFP code is not allowed to sleep;
+* NEON/VFP code is executed with preemption disabled.
+
+If latency is a concern, it is possible to put back to back calls to
+kernel_neon_end() and kernel_neon_begin() in places in your code where none of
+the NEON registers are live. (Additional calls to kernel_neon_begin() should be
+reasonably cheap if no context switch occurred in the meantime)
+
+
+VFP and support code
+--------------------
+Earlier versions of VFP (prior to version 3) rely on software support for things
+like IEEE-754 compliant underflow handling etc. When the VFP unit needs such
+software assistance, it signals the kernel by raising an undefined instruction
+exception. The kernel responds by inspecting the VFP control registers and the
+current instruction and arguments, and emulates the instruction in software.
+
+Such software assistance is currently not implemented for VFP instructions
+executed in kernel mode. If such a condition is encountered, the kernel will
+fail and generate an OOPS.
+
+
+Separating NEON code from ordinary code
+---------------------------------------
+The compiler is not aware of the special significance of kernel_neon_begin() and
+kernel_neon_end(), i.e., that it is only allowed to issue NEON/VFP instructions
+between calls to these respective functions. Furthermore, GCC may generate NEON
+instructions of its own at -O3 level if -mfpu=neon is selected, and even if the
+kernel is currently compiled at -O2, future changes may result in NEON/VFP
+instructions appearing in unexpected places if no special care is taken.
+
+Therefore, the recommended and only supported way of using NEON/VFP in the
+kernel is by adhering to the following rules:
+
+* isolate the NEON code in a separate compilation unit and compile it with
+  '-march=armv7-a -mfpu=neon -mfloat-abi=softfp';
+* issue the calls to kernel_neon_begin(), kernel_neon_end() as well as the calls
+  into the unit containing the NEON code from a compilation unit which is *not*
+  built with the GCC flag '-mfpu=neon' set.
+
+As the kernel is compiled with '-msoft-float', the above will guarantee that
+both NEON and VFP instructions will only ever appear in designated compilation
+units at any optimization level.
+
+
+NEON assembler
+--------------
+NEON assembler is supported with no additional caveats as long as the rules
+above are followed.
+
+
+NEON code generated by GCC
+--------------------------
+The GCC option -ftree-vectorize (implied by -O3) tries to exploit implicit
+parallelism, and generates NEON code from ordinary C source code. This is fully
+supported as long as the rules above are followed.
+
+
+NEON intrinsics
+---------------
+NEON intrinsics are also supported. However, as code using NEON intrinsics
+relies on the GCC header <arm_neon.h>, (which #includes <stdint.h>), you should
+observe the following in addition to the rules above:
+
+* Compile the unit containing the NEON intrinsics with '-ffreestanding' so GCC
+  uses its builtin version of <stdint.h> (this is a C99 header which the kernel
+  does not supply);
+* Include <arm_neon.h> last, or at least after <linux/types.h>
diff --git a/Documentation/arch/arm/kernel_user_helpers.rst b/Documentation/arch/arm/kernel_user_helpers.rst
new file mode 100644
index 0000000000000..eb6f3d9166227
--- /dev/null
+++ b/Documentation/arch/arm/kernel_user_helpers.rst
@@ -0,0 +1,268 @@
+============================
+Kernel-provided User Helpers
+============================
+
+These are segment of kernel provided user code reachable from user space
+at a fixed address in kernel memory.  This is used to provide user space
+with some operations which require kernel help because of unimplemented
+native feature and/or instructions in many ARM CPUs. The idea is for this
+code to be executed directly in user mode for best efficiency but which is
+too intimate with the kernel counter part to be left to user libraries.
+In fact this code might even differ from one CPU to another depending on
+the available instruction set, or whether it is a SMP systems. In other
+words, the kernel reserves the right to change this code as needed without
+warning. Only the entry points and their results as documented here are
+guaranteed to be stable.
+
+This is different from (but doesn't preclude) a full blown VDSO
+implementation, however a VDSO would prevent some assembly tricks with
+constants that allows for efficient branching to those code segments. And
+since those code segments only use a few cycles before returning to user
+code, the overhead of a VDSO indirect far call would add a measurable
+overhead to such minimalistic operations.
+
+User space is expected to bypass those helpers and implement those things
+inline (either in the code emitted directly by the compiler, or part of
+the implementation of a library call) when optimizing for a recent enough
+processor that has the necessary native support, but only if resulting
+binaries are already to be incompatible with earlier ARM processors due to
+usage of similar native instructions for other things.  In other words
+don't make binaries unable to run on earlier processors just for the sake
+of not using these kernel helpers if your compiled code is not going to
+use new instructions for other purpose.
+
+New helpers may be added over time, so an older kernel may be missing some
+helpers present in a newer kernel.  For this reason, programs must check
+the value of __kuser_helper_version (see below) before assuming that it is
+safe to call any particular helper.  This check should ideally be
+performed only once at process startup time, and execution aborted early
+if the required helpers are not provided by the kernel version that
+process is running on.
+
+kuser_helper_version
+--------------------
+
+Location:	0xffff0ffc
+
+Reference declaration::
+
+  extern int32_t __kuser_helper_version;
+
+Definition:
+
+  This field contains the number of helpers being implemented by the
+  running kernel.  User space may read this to determine the availability
+  of a particular helper.
+
+Usage example::
+
+  #define __kuser_helper_version (*(int32_t *)0xffff0ffc)
+
+  void check_kuser_version(void)
+  {
+	if (__kuser_helper_version < 2) {
+		fprintf(stderr, "can't do atomic operations, kernel too old\n");
+		abort();
+	}
+  }
+
+Notes:
+
+  User space may assume that the value of this field never changes
+  during the lifetime of any single process.  This means that this
+  field can be read once during the initialisation of a library or
+  startup phase of a program.
+
+kuser_get_tls
+-------------
+
+Location:	0xffff0fe0
+
+Reference prototype::
+
+  void * __kuser_get_tls(void);
+
+Input:
+
+  lr = return address
+
+Output:
+
+  r0 = TLS value
+
+Clobbered registers:
+
+  none
+
+Definition:
+
+  Get the TLS value as previously set via the __ARM_NR_set_tls syscall.
+
+Usage example::
+
+  typedef void * (__kuser_get_tls_t)(void);
+  #define __kuser_get_tls (*(__kuser_get_tls_t *)0xffff0fe0)
+
+  void foo()
+  {
+	void *tls = __kuser_get_tls();
+	printf("TLS = %p\n", tls);
+  }
+
+Notes:
+
+  - Valid only if __kuser_helper_version >= 1 (from kernel version 2.6.12).
+
+kuser_cmpxchg
+-------------
+
+Location:	0xffff0fc0
+
+Reference prototype::
+
+  int __kuser_cmpxchg(int32_t oldval, int32_t newval, volatile int32_t *ptr);
+
+Input:
+
+  r0 = oldval
+  r1 = newval
+  r2 = ptr
+  lr = return address
+
+Output:
+
+  r0 = success code (zero or non-zero)
+  C flag = set if r0 == 0, clear if r0 != 0
+
+Clobbered registers:
+
+  r3, ip, flags
+
+Definition:
+
+  Atomically store newval in `*ptr` only if `*ptr` is equal to oldval.
+  Return zero if `*ptr` was changed or non-zero if no exchange happened.
+  The C flag is also set if `*ptr` was changed to allow for assembly
+  optimization in the calling code.
+
+Usage example::
+
+  typedef int (__kuser_cmpxchg_t)(int oldval, int newval, volatile int *ptr);
+  #define __kuser_cmpxchg (*(__kuser_cmpxchg_t *)0xffff0fc0)
+
+  int atomic_add(volatile int *ptr, int val)
+  {
+	int old, new;
+
+	do {
+		old = *ptr;
+		new = old + val;
+	} while(__kuser_cmpxchg(old, new, ptr));
+
+	return new;
+  }
+
+Notes:
+
+  - This routine already includes memory barriers as needed.
+
+  - Valid only if __kuser_helper_version >= 2 (from kernel version 2.6.12).
+
+kuser_memory_barrier
+--------------------
+
+Location:	0xffff0fa0
+
+Reference prototype::
+
+  void __kuser_memory_barrier(void);
+
+Input:
+
+  lr = return address
+
+Output:
+
+  none
+
+Clobbered registers:
+
+  none
+
+Definition:
+
+  Apply any needed memory barrier to preserve consistency with data modified
+  manually and __kuser_cmpxchg usage.
+
+Usage example::
+
+  typedef void (__kuser_dmb_t)(void);
+  #define __kuser_dmb (*(__kuser_dmb_t *)0xffff0fa0)
+
+Notes:
+
+  - Valid only if __kuser_helper_version >= 3 (from kernel version 2.6.15).
+
+kuser_cmpxchg64
+---------------
+
+Location:	0xffff0f60
+
+Reference prototype::
+
+  int __kuser_cmpxchg64(const int64_t *oldval,
+                        const int64_t *newval,
+                        volatile int64_t *ptr);
+
+Input:
+
+  r0 = pointer to oldval
+  r1 = pointer to newval
+  r2 = pointer to target value
+  lr = return address
+
+Output:
+
+  r0 = success code (zero or non-zero)
+  C flag = set if r0 == 0, clear if r0 != 0
+
+Clobbered registers:
+
+  r3, lr, flags
+
+Definition:
+
+  Atomically store the 64-bit value pointed by `*newval` in `*ptr` only if `*ptr`
+  is equal to the 64-bit value pointed by `*oldval`.  Return zero if `*ptr` was
+  changed or non-zero if no exchange happened.
+
+  The C flag is also set if `*ptr` was changed to allow for assembly
+  optimization in the calling code.
+
+Usage example::
+
+  typedef int (__kuser_cmpxchg64_t)(const int64_t *oldval,
+                                    const int64_t *newval,
+                                    volatile int64_t *ptr);
+  #define __kuser_cmpxchg64 (*(__kuser_cmpxchg64_t *)0xffff0f60)
+
+  int64_t atomic_add64(volatile int64_t *ptr, int64_t val)
+  {
+	int64_t old, new;
+
+	do {
+		old = *ptr;
+		new = old + val;
+	} while(__kuser_cmpxchg64(&old, &new, ptr));
+
+	return new;
+  }
+
+Notes:
+
+  - This routine already includes memory barriers as needed.
+
+  - Due to the length of this sequence, this spans 2 conventional kuser
+    "slots", therefore 0xffff0f80 is not used as a valid entry point.
+
+  - Valid only if __kuser_helper_version >= 5 (from kernel version 3.1).
diff --git a/Documentation/arch/arm/keystone/knav-qmss.rst b/Documentation/arch/arm/keystone/knav-qmss.rst
new file mode 100644
index 0000000000000..7f7638d80b424
--- /dev/null
+++ b/Documentation/arch/arm/keystone/knav-qmss.rst
@@ -0,0 +1,60 @@
+======================================================================
+Texas Instruments Keystone Navigator Queue Management SubSystem driver
+======================================================================
+
+Driver source code path
+  drivers/soc/ti/knav_qmss.c
+  drivers/soc/ti/knav_qmss_acc.c
+
+The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of
+the main hardware sub system which forms the backbone of the Keystone
+multi-core Navigator. QMSS consist of queue managers, packed-data structure
+processors(PDSP), linking RAM, descriptor pools and infrastructure
+Packet DMA.
+The Queue Manager is a hardware module that is responsible for accelerating
+management of the packet queues. Packets are queued/de-queued by writing or
+reading descriptor address to a particular memory mapped location. The PDSPs
+perform QMSS related functions like accumulation, QoS, or event management.
+Linking RAM registers are used to link the descriptors which are stored in
+descriptor RAM. Descriptor RAM is configurable as internal or external memory.
+The QMSS driver manages the PDSP setups, linking RAM regions,
+queue pool management (allocation, push, pop and notify) and descriptor
+pool management.
+
+knav qmss driver provides a set of APIs to drivers to open/close qmss queues,
+allocate descriptor pools, map the descriptors, push/pop to queues etc. For
+details of the available APIs, please refers to include/linux/soc/ti/knav_qmss.h
+
+DT documentation is available at
+Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
+
+Accumulator QMSS queues using PDSP firmware
+============================================
+The QMSS PDSP firmware support accumulator channel that can monitor a single
+queue or multiple contiguous queues. drivers/soc/ti/knav_qmss_acc.c is the
+driver that interface with the accumulator PDSP. This configures
+accumulator channels defined in DTS (example in DT documentation) to monitor
+1 or 32 queues per channel. More description on the firmware is available in
+CPPI/QMSS Low Level Driver document (docs/CPPI_QMSS_LLD_SDS.pdf) at
+
+	git://git.ti.com/keystone-rtos/qmss-lld.git
+
+k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
+channels. This firmware is available under ti-keystone folder of
+firmware.git at
+
+   git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
+
+To use copy the firmware image to lib/firmware folder of the initramfs or
+ubifs file system and provide a sym link to k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin
+in the file system and boot up the kernel. User would see
+
+ "firmware file ks2_qmss_pdsp_acc48.bin downloaded for PDSP"
+
+in the boot up log if loading of firmware to PDSP is successful.
+
+Use of accumulated queues requires the firmware image to be present in the
+file system. The driver doesn't acc queues to the supported queue range if
+PDSP is not running in the SoC. The API call fails if there is a queue open
+request to an acc queue and PDSP is not running. So make sure to copy firmware
+to file system before using these queue types.
diff --git a/Documentation/arch/arm/keystone/overview.rst b/Documentation/arch/arm/keystone/overview.rst
new file mode 100644
index 0000000000000..cd90298c493c7
--- /dev/null
+++ b/Documentation/arch/arm/keystone/overview.rst
@@ -0,0 +1,74 @@
+==========================
+TI Keystone Linux Overview
+==========================
+
+Introduction
+------------
+Keystone range of SoCs are based on ARM Cortex-A15 MPCore Processors
+and c66x DSP cores. This document describes essential information required
+for users to run Linux on Keystone based EVMs from Texas Instruments.
+
+Following SoCs  & EVMs are currently supported:-
+
+K2HK SoC and EVM
+=================
+
+a.k.a Keystone 2 Hawking/Kepler SoC
+TCI6636K2H & TCI6636K2K: See documentation at
+
+	http://www.ti.com/product/tci6638k2k
+	http://www.ti.com/product/tci6638k2h
+
+EVM:
+  http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
+
+K2E SoC and EVM
+===============
+
+a.k.a Keystone 2 Edison SoC
+
+K2E  -  66AK2E05:
+
+See documentation at
+
+	http://www.ti.com/product/66AK2E05/technicaldocuments
+
+EVM:
+   https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
+
+K2L SoC and EVM
+===============
+
+a.k.a Keystone 2 Lamarr SoC
+
+K2L  -  TCI6630K2L:
+
+See documentation at
+	http://www.ti.com/product/TCI6630K2L/technicaldocuments
+
+EVM:
+  https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
+
+Configuration
+-------------
+
+All of the K2 SoCs/EVMs share a common defconfig, keystone_defconfig and same
+image is used to boot on individual EVMs. The platform configuration is
+specified through DTS. Following are the DTS used:
+
+	K2HK EVM:
+		k2hk-evm.dts
+	K2E EVM:
+		k2e-evm.dts
+	K2L EVM:
+		k2l-evm.dts
+
+The device tree documentation for the keystone machines are located at
+
+        Documentation/devicetree/bindings/arm/keystone/keystone.txt
+
+Document Author
+---------------
+Murali Karicheri <m-karicheri2@ti.com>
+
+Copyright 2015 Texas Instruments
diff --git a/Documentation/arch/arm/marvell.rst b/Documentation/arch/arm/marvell.rst
new file mode 100644
index 0000000000000..3d369a5660382
--- /dev/null
+++ b/Documentation/arch/arm/marvell.rst
@@ -0,0 +1,527 @@
+================
+ARM Marvell SoCs
+================
+
+This document lists all the ARM Marvell SoCs that are currently
+supported in mainline by the Linux kernel. As the Marvell families of
+SoCs are large and complex, it is hard to understand where the support
+for a particular SoC is available in the Linux kernel. This document
+tries to help in understanding where those SoCs are supported, and to
+match them with their corresponding public datasheet, when available.
+
+Orion family
+------------
+
+  Flavors:
+        - 88F5082
+        - 88F5181  a.k.a Orion-1
+        - 88F5181L a.k.a Orion-VoIP
+        - 88F5182  a.k.a Orion-NAS
+
+               - Datasheet: https://web.archive.org/web/20210124231420/http://csclub.uwaterloo.ca/~board/ts7800/MV88F5182-datasheet.pdf
+               - Programmer's User Guide: https://web.archive.org/web/20210124231536/http://csclub.uwaterloo.ca/~board/ts7800/MV88F5182-opensource-manual.pdf
+               - User Manual: https://web.archive.org/web/20210124231631/http://csclub.uwaterloo.ca/~board/ts7800/MV88F5182-usermanual.pdf
+               - Functional Errata: https://web.archive.org/web/20210704165540/https://www.digriz.org.uk/ts78xx/88F5182_Functional_Errata.pdf
+        - 88F5281  a.k.a Orion-2
+
+               - Datasheet: https://web.archive.org/web/20131028144728/http://www.ocmodshop.com/images/reviews/networking/qnap_ts409u/marvel_88f5281_data_sheet.pdf
+        - 88F6183  a.k.a Orion-1-90
+  Homepage:
+        https://web.archive.org/web/20080607215437/http://www.marvell.com/products/media/index.jsp
+  Core:
+	Feroceon 88fr331 (88f51xx) or 88fr531-vd (88f52xx) ARMv5 compatible
+  Linux kernel mach directory:
+	arch/arm/mach-orion5x
+  Linux kernel plat directory:
+	arch/arm/plat-orion
+
+Kirkwood family
+---------------
+
+  Flavors:
+        - 88F6282 a.k.a Armada 300
+
+                - Product Brief  : https://web.archive.org/web/20111027032509/http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
+        - 88F6283 a.k.a Armada 310
+
+                - Product Brief  : https://web.archive.org/web/20111027032509/http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
+        - 88F6190
+
+                - Product Brief  : https://web.archive.org/web/20130730072715/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6190-003_WEB.pdf
+                - Hardware Spec  : https://web.archive.org/web/20121021182835/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        - 88F6192
+
+                - Product Brief  : https://web.archive.org/web/20131113121446/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6192-003_ver1.pdf
+                - Hardware Spec  : https://web.archive.org/web/20121021182835/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        - 88F6182
+        - 88F6180
+
+                - Product Brief  : https://web.archive.org/web/20120616201621/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6180-003_ver1.pdf
+                - Hardware Spec  : https://web.archive.org/web/20130730091654/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        - 88F6280
+
+                - Product Brief  : https://web.archive.org/web/20130730091058/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6280_SoC_PB-001.pdf
+        - 88F6281
+
+                - Product Brief  : https://web.archive.org/web/20120131133709/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6281-004_ver1.pdf
+                - Hardware Spec  : https://web.archive.org/web/20120620073511/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        - 88F6321
+        - 88F6322
+        - 88F6323
+
+                - Product Brief  : https://web.archive.org/web/20120616201639/http://www.marvell.com/embedded-processors/kirkwood/assets/88f632x_pb.pdf
+  Homepage:
+	https://web.archive.org/web/20160513194943/http://www.marvell.com/embedded-processors/kirkwood/
+  Core:
+	Feroceon 88fr131 ARMv5 compatible
+  Linux kernel mach directory:
+	arch/arm/mach-mvebu
+  Linux kernel plat directory:
+	none
+
+Discovery family
+----------------
+
+  Flavors:
+        - MV78100
+
+                - Product Brief  : https://web.archive.org/web/20120616194711/http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78100-003_WEB.pdf
+                - Hardware Spec  : https://web.archive.org/web/20141005120451/http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78100_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20111110081125/http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
+        - MV78200
+
+                - Product Brief  : https://web.archive.org/web/20140801121623/http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78200-002_WEB.pdf
+                - Hardware Spec  : https://web.archive.org/web/20141005120458/http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78200_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20111110081125/http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
+
+        - MV76100
+
+                - Product Brief  : https://web.archive.org/web/20140722064429/http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV76100-002_WEB.pdf
+                - Hardware Spec  : https://web.archive.org/web/20140722064425/http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV76100_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20111110081125/http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
+
+                Not supported by the Linux kernel.
+
+  Homepage:
+        https://web.archive.org/web/20110924171043/http://www.marvell.com/embedded-processors/discovery-innovation/
+  Core:
+	Feroceon 88fr571-vd ARMv5 compatible
+
+  Linux kernel mach directory:
+	arch/arm/mach-mv78xx0
+  Linux kernel plat directory:
+	arch/arm/plat-orion
+
+EBU Armada family
+-----------------
+
+  Armada 370 Flavors:
+        - 88F6710
+        - 88F6707
+        - 88F6W11
+
+    - Product infos:   https://web.archive.org/web/20141002083258/http://www.marvell.com/embedded-processors/armada-370/
+    - Product Brief:   https://web.archive.org/web/20121115063038/http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf
+    - Hardware Spec:   https://web.archive.org/web/20140617183747/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-datasheet.pdf
+    - Functional Spec: https://web.archive.org/web/20140617183701/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-FunctionalSpec-datasheet.pdf
+
+  Core:
+	Sheeva ARMv7 compatible PJ4B
+
+  Armada XP Flavors:
+        - MV78230
+        - MV78260
+        - MV78460
+
+    NOTE:
+	not to be confused with the non-SMP 78xx0 SoCs
+
+    - Product infos:   https://web.archive.org/web/20150101215721/http://www.marvell.com/embedded-processors/armada-xp/
+    - Product Brief:   https://web.archive.org/web/20121021173528/http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
+    - Functional Spec: https://web.archive.org/web/20180829171131/http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf
+    - Hardware Specs:
+        - https://web.archive.org/web/20141127013651/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78230_OS.PDF
+        - https://web.archive.org/web/20141222000224/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78260_OS.PDF
+        - https://web.archive.org/web/20141222000230/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78460_OS.PDF
+
+  Core:
+	Sheeva ARMv7 compatible Dual-core or Quad-core PJ4B-MP
+
+  Armada 375 Flavors:
+	- 88F6720
+
+    - Product infos: https://web.archive.org/web/20140108032402/http://www.marvell.com/embedded-processors/armada-375/
+    - Product Brief: https://web.archive.org/web/20131216023516/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA_375_SoC-01_product_brief.pdf
+
+  Core:
+	ARM Cortex-A9
+
+  Armada 38x Flavors:
+	- 88F6810	Armada 380
+	- 88F6811 Armada 381
+	- 88F6821 Armada 382
+	- 88F6W21 Armada 383
+	- 88F6820 Armada 385
+	- 88F6825
+	- 88F6828 Armada 388
+
+    - Product infos:   https://web.archive.org/web/20181006144616/http://www.marvell.com/embedded-processors/armada-38x/
+    - Functional Spec: https://web.archive.org/web/20200420191927/https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-embedded-processors-armada-38x-functional-specifications-2015-11.pdf
+    - Hardware Spec:   https://web.archive.org/web/20180713105318/https://www.marvell.com/docs/embedded-processors/assets/marvell-embedded-processors-armada-38x-hardware-specifications-2017-03.pdf
+    - Design guide:    https://web.archive.org/web/20180712231737/https://www.marvell.com/docs/embedded-processors/assets/marvell-embedded-processors-armada-38x-hardware-design-guide-2017-08.pdf
+
+  Core:
+	ARM Cortex-A9
+
+  Armada 39x Flavors:
+	- 88F6920 Armada 390
+	- 88F6925 Armada 395
+	- 88F6928 Armada 398
+
+    - Product infos: https://web.archive.org/web/20181020222559/http://www.marvell.com/embedded-processors/armada-39x/
+
+  Core:
+	ARM Cortex-A9
+
+  Linux kernel mach directory:
+	arch/arm/mach-mvebu
+  Linux kernel plat directory:
+	none
+
+EBU Armada family ARMv8
+-----------------------
+
+  Armada 3710/3720 Flavors:
+	- 88F3710
+	- 88F3720
+
+  Core:
+	ARM Cortex A53 (ARMv8)
+
+  Homepage:
+	https://web.archive.org/web/20181103003602/http://www.marvell.com/embedded-processors/armada-3700/
+
+  Product Brief:
+	https://web.archive.org/web/20210121194810/https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-embedded-processors-armada-37xx-product-brief-2016-01.pdf
+
+  Hardware Spec:
+	https://web.archive.org/web/20210202162011/http://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-embedded-processors-armada-37xx-hardware-specifications-2019-09.pdf
+
+  Device tree files:
+	arch/arm64/boot/dts/marvell/armada-37*
+
+  Armada 7K Flavors:
+	  - 88F6040 (AP806 Quad 600 MHz + one CP110)
+	  - 88F7020 (AP806 Dual + one CP110)
+	  - 88F7040 (AP806 Quad + one CP110)
+
+  Core: ARM Cortex A72
+
+  Homepage:
+	https://web.archive.org/web/20181020222606/http://www.marvell.com/embedded-processors/armada-70xx/
+
+  Product Brief:
+	  - https://web.archive.org/web/20161010105541/http://www.marvell.com/embedded-processors/assets/Armada7020PB-Jan2016.pdf
+	  - https://web.archive.org/web/20160928154533/http://www.marvell.com/embedded-processors/assets/Armada7040PB-Jan2016.pdf
+
+  Device tree files:
+	arch/arm64/boot/dts/marvell/armada-70*
+
+  Armada 8K Flavors:
+	- 88F8020 (AP806 Dual + two CP110)
+	- 88F8040 (AP806 Quad + two CP110)
+  Core:
+	ARM Cortex A72
+
+  Homepage:
+	https://web.archive.org/web/20181022004830/http://www.marvell.com/embedded-processors/armada-80xx/
+
+  Product Brief:
+	  - https://web.archive.org/web/20210124233728/https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-embedded-processors-armada-8020-product-brief-2017-12.pdf
+	  - https://web.archive.org/web/20161010105532/http://www.marvell.com/embedded-processors/assets/Armada8040PB-Jan2016.pdf
+
+  Device tree files:
+	arch/arm64/boot/dts/marvell/armada-80*
+
+  Octeon TX2 CN913x Flavors:
+	- CN9130 (AP807 Quad + one internal CP115)
+	- CN9131 (AP807 Quad + one internal CP115 + one external CP115 / 88F8215)
+	- CN9132 (AP807 Quad + one internal CP115 + two external CP115 / 88F8215)
+
+  Core:
+	ARM Cortex A72
+
+  Homepage:
+	https://web.archive.org/web/20200803150818/https://www.marvell.com/products/infrastructure-processors/multi-core-processors/octeon-tx2/octeon-tx2-cn9130.html
+
+  Product Brief:
+	https://web.archive.org/web/20200803150818/https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-infrastructure-processors-octeon-tx2-cn913x-product-brief-2020-02.pdf
+
+  Device tree files:
+	arch/arm64/boot/dts/marvell/cn913*
+
+Avanta family
+-------------
+
+  Flavors:
+       - 88F6500
+       - 88F6510
+       - 88F6530P
+       - 88F6550
+       - 88F6560
+       - 88F6601
+
+  Homepage:
+	https://web.archive.org/web/20181005145041/http://www.marvell.com/broadband/
+
+  Product Brief:
+	https://web.archive.org/web/20180829171057/http://www.marvell.com/broadband/assets/Marvell_Avanta_88F6510_305_060-001_product_brief.pdf
+
+  No public datasheet available.
+
+  Core:
+	ARMv5 compatible
+
+  Linux kernel mach directory:
+	no code in mainline yet, planned for the future
+  Linux kernel plat directory:
+	no code in mainline yet, planned for the future
+
+Storage family
+--------------
+
+  Armada SP:
+	- 88RC1580
+
+  Product infos:
+	https://web.archive.org/web/20191129073953/http://www.marvell.com/storage/armada-sp/
+
+  Core:
+	Sheeva ARMv7 compatible Quad-core PJ4C
+
+  (not supported in upstream Linux kernel)
+
+Dove family (application processor)
+-----------------------------------
+
+  Flavors:
+        - 88AP510 a.k.a Armada 510
+
+   Product Brief:
+	https://web.archive.org/web/20111102020643/http://www.marvell.com/application-processors/armada-500/assets/Marvell_Armada510_SoC.pdf
+
+   Hardware Spec:
+	https://web.archive.org/web/20160428160231/http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Hardware-Spec.pdf
+
+  Functional Spec:
+	https://web.archive.org/web/20120130172443/http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf
+
+  Homepage:
+	https://web.archive.org/web/20160822232651/http://www.marvell.com/application-processors/armada-500/
+
+  Core:
+	ARMv7 compatible
+
+  Directory:
+	- arch/arm/mach-mvebu (DT enabled platforms)
+        - arch/arm/mach-dove (non-DT enabled platforms)
+
+PXA 2xx/3xx/93x/95x family
+--------------------------
+
+  Flavors:
+        - PXA21x, PXA25x, PXA26x
+             - Application processor only
+             - Core: ARMv5 XScale1 core
+        - PXA270, PXA271, PXA272
+             - Product Brief         : https://web.archive.org/web/20150927135510/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_pb.pdf
+             - Design guide          : https://web.archive.org/web/20120111181937/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_design_guide.pdf
+             - Developers manual     : https://web.archive.org/web/20150927164805/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_dev_man.pdf
+             - Specification         : https://web.archive.org/web/20140211221535/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_emts.pdf
+             - Specification update  : https://web.archive.org/web/20120111104906/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf
+             - Application processor only
+             - Core: ARMv5 XScale2 core
+        - PXA300, PXA310, PXA320
+             - PXA 300 Product Brief : https://web.archive.org/web/20120111121203/http://www.marvell.com/application-processors/pxa-family/assets/PXA300_PB_R4.pdf
+             - PXA 310 Product Brief : https://web.archive.org/web/20120111104515/http://www.marvell.com/application-processors/pxa-family/assets/PXA310_PB_R4.pdf
+             - PXA 320 Product Brief : https://web.archive.org/web/20121021182826/http://www.marvell.com/application-processors/pxa-family/assets/PXA320_PB_R4.pdf
+             - Design guide          : https://web.archive.org/web/20130727144625/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Design_Guide.pdf
+             - Developers manual     : https://web.archive.org/web/20130727144605/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Developers_Manual.zip
+             - Specifications        : https://web.archive.org/web/20130727144559/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_EMTS.pdf
+             - Specification Update  : https://web.archive.org/web/20150927183411/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Spec_Update.zip
+             - Reference Manual      : https://web.archive.org/web/20120111103844/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_TavorP_BootROM_Ref_Manual.pdf
+             - Application processor only
+             - Core: ARMv5 XScale3 core
+        - PXA930, PXA935
+             - Application processor with Communication processor
+             - Core: ARMv5 XScale3 core
+        - PXA955
+             - Application processor with Communication processor
+             - Core: ARMv7 compatible Sheeva PJ4 core
+
+   Comments:
+
+    * This line of SoCs originates from the XScale family developed by
+      Intel and acquired by Marvell in ~2006. The PXA21x, PXA25x,
+      PXA26x, PXA27x, PXA3xx and PXA93x were developed by Intel, while
+      the later PXA95x were developed by Marvell.
+
+    * Due to their XScale origin, these SoCs have virtually nothing in
+      common with the other (Kirkwood, Dove, etc.) families of Marvell
+      SoCs, except with the MMP/MMP2 family of SoCs.
+
+   Linux kernel mach directory:
+	arch/arm/mach-pxa
+
+MMP/MMP2/MMP3 family (communication processor)
+----------------------------------------------
+
+   Flavors:
+        - PXA168, a.k.a Armada 168
+             - Homepage             : https://web.archive.org/web/20110926014256/http://www.marvell.com/application-processors/armada-100/armada-168.jsp
+             - Product brief        : https://web.archive.org/web/20111102030100/http://www.marvell.com/application-processors/armada-100/assets/pxa_168_pb.pdf
+             - Hardware manual      : https://web.archive.org/web/20160428165359/http://www.marvell.com/application-processors/armada-100/assets/armada_16x_datasheet.pdf
+             - Software manual      : https://web.archive.org/web/20160428154454/http://www.marvell.com/application-processors/armada-100/assets/armada_16x_software_manual.pdf
+             - Specification update : https://web.archive.org/web/20150927160338/http://www.marvell.com/application-processors/armada-100/assets/ARMADA16x_Spec_update.pdf
+             - Boot ROM manual      : https://web.archive.org/web/20130727205559/http://www.marvell.com/application-processors/armada-100/assets/armada_16x_ref_manual.pdf
+             - App node package     : https://web.archive.org/web/20141005090706/http://www.marvell.com/application-processors/armada-100/assets/armada_16x_app_note_package.pdf
+             - Application processor only
+             - Core: ARMv5 compatible Marvell PJ1 88sv331 (Mohawk)
+        - PXA910/PXA920
+             - Homepage             : https://web.archive.org/web/20150928121236/http://www.marvell.com/communication-processors/pxa910/
+             - Product Brief        : https://archive.org/download/marvell-pxa910-pb/Marvell_PXA910_Platform-001_PB.pdf
+             - Application processor with Communication processor
+             - Core: ARMv5 compatible Marvell PJ1 88sv331 (Mohawk)
+        - PXA688, a.k.a. MMP2, a.k.a Armada 610 (OLPC XO-1.75)
+             - Product Brief        : https://web.archive.org/web/20111102023255/http://www.marvell.com/application-processors/armada-600/assets/armada610_pb.pdf
+             - Application processor only
+             - Core: ARMv7 compatible Sheeva PJ4 88sv581x core
+	- PXA2128, a.k.a. MMP3, a.k.a Armada 620 (OLPC XO-4)
+	     - Product Brief	    : https://web.archive.org/web/20120824055155/http://www.marvell.com/application-processors/armada/pxa2128/assets/Marvell-ARMADA-PXA2128-SoC-PB.pdf
+	     - Application processor only
+	     - Core: Dual-core ARMv7 compatible Sheeva PJ4C core
+	- PXA960/PXA968/PXA978 (Linux support not upstream)
+	     - Application processor with Communication Processor
+	     - Core: ARMv7 compatible Sheeva PJ4 core
+	- PXA986/PXA988 (Linux support not upstream)
+	     - Application processor with Communication Processor
+	     - Core: Dual-core ARMv7 compatible Sheeva PJ4B-MP core
+	- PXA1088/PXA1920 (Linux support not upstream)
+	     - Application processor with Communication Processor
+	     - Core: quad-core ARMv7 Cortex-A7
+	- PXA1908/PXA1928/PXA1936
+	     - Application processor with Communication Processor
+	     - Core: multi-core ARMv8 Cortex-A53
+
+   Comments:
+
+    * This line of SoCs originates from the XScale family developed by
+      Intel and acquired by Marvell in ~2006. All the processors of
+      this MMP/MMP2 family were developed by Marvell.
+
+    * Due to their XScale origin, these SoCs have virtually nothing in
+      common with the other (Kirkwood, Dove, etc.) families of Marvell
+      SoCs, except with the PXA family of SoCs listed above.
+
+   Linux kernel mach directory:
+	arch/arm/mach-mmp
+
+Berlin family (Multimedia Solutions)
+-------------------------------------
+
+  - Flavors:
+	- 88DE3010, Armada 1000 (no Linux support)
+		- Core:		Marvell PJ1 (ARMv5TE), Dual-core
+		- Product Brief:	https://web.archive.org/web/20131103162620/http://www.marvell.com/digital-entertainment/assets/armada_1000_pb.pdf
+	- 88DE3005, Armada 1500 Mini
+		- Design name:	BG2CD
+		- Core:		ARM Cortex-A9, PL310 L2CC
+	- 88DE3006, Armada 1500 Mini Plus
+		- Design name:	BG2CDP
+		- Core:		Dual Core ARM Cortex-A7
+	- 88DE3100, Armada 1500
+		- Design name:	BG2
+		- Core:		Marvell PJ4B-MP (ARMv7), Tauros3 L2CC
+	- 88DE3114, Armada 1500 Pro
+		- Design name:	BG2Q
+		- Core:		Quad Core ARM Cortex-A9, PL310 L2CC
+	- 88DE3214, Armada 1500 Pro 4K
+		- Design name:	BG3
+		- Core:		ARM Cortex-A15, CA15 integrated L2CC
+	- 88DE3218, ARMADA 1500 Ultra
+		- Core:		ARM Cortex-A53
+
+  Homepage: https://www.synaptics.com/products/multimedia-solutions
+  Directory: arch/arm/mach-berlin
+
+  Comments:
+
+   * This line of SoCs is based on Marvell Sheeva or ARM Cortex CPUs
+     with Synopsys DesignWare (IRQ, GPIO, Timers, ...) and PXA IP (SDHCI, USB, ETH, ...).
+
+   * The Berlin family was acquired by Synaptics from Marvell in 2017.
+
+CPU Cores
+---------
+
+The XScale cores were designed by Intel, and shipped by Marvell in the older
+PXA processors. Feroceon is a Marvell designed core that developed in-house,
+and that evolved into Sheeva. The XScale and Feroceon cores were phased out
+over time and replaced with Sheeva cores in later products, which subsequently
+got replaced with licensed ARM Cortex-A cores.
+
+  XScale 1
+	CPUID 0x69052xxx
+	ARMv5, iWMMXt
+  XScale 2
+	CPUID 0x69054xxx
+	ARMv5, iWMMXt
+  XScale 3
+	CPUID 0x69056xxx or 0x69056xxx
+	ARMv5, iWMMXt
+  Feroceon-1850 88fr331 "Mohawk"
+	CPUID 0x5615331x or 0x41xx926x
+	ARMv5TE, single issue
+  Feroceon-2850 88fr531-vd "Jolteon"
+	CPUID 0x5605531x or 0x41xx926x
+	ARMv5TE, VFP, dual-issue
+  Feroceon 88fr571-vd "Jolteon"
+	CPUID 0x5615571x
+	ARMv5TE, VFP, dual-issue
+  Feroceon 88fr131 "Mohawk-D"
+	CPUID 0x5625131x
+	ARMv5TE, single-issue in-order
+  Sheeva PJ1 88sv331 "Mohawk"
+	CPUID 0x561584xx
+	ARMv5, single-issue iWMMXt v2
+  Sheeva PJ4 88sv581x "Flareon"
+	CPUID 0x560f581x
+	ARMv7, idivt, optional iWMMXt v2
+  Sheeva PJ4B 88sv581x
+	CPUID 0x561f581x
+	ARMv7, idivt, optional iWMMXt v2
+  Sheeva PJ4B-MP / PJ4C
+	CPUID 0x562f584x
+	ARMv7, idivt/idiva, LPAE, optional iWMMXt v2 and/or NEON
+
+Long-term plans
+---------------
+
+ * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ into the
+   mach-mvebu/ to support all SoCs from the Marvell EBU (Engineering
+   Business Unit) in a single mach-<foo> directory. The plat-orion/
+   would therefore disappear.
+
+Credits
+-------
+
+- Maen Suleiman <maen@marvell.com>
+- Lior Amsalem <alior@marvell.com>
+- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+- Andrew Lunn <andrew@lunn.ch>
+- Nicolas Pitre <nico@fluxnic.net>
+- Eric Miao <eric.y.miao@gmail.com>
diff --git a/Documentation/arch/arm/mem_alignment.rst b/Documentation/arch/arm/mem_alignment.rst
new file mode 100644
index 0000000000000..aa22893b62bc3
--- /dev/null
+++ b/Documentation/arch/arm/mem_alignment.rst
@@ -0,0 +1,63 @@
+================
+Memory alignment
+================
+
+Too many problems popped up because of unnoticed misaligned memory access in
+kernel code lately.  Therefore the alignment fixup is now unconditionally
+configured in for SA11x0 based targets.  According to Alan Cox, this is a
+bad idea to configure it out, but Russell King has some good reasons for
+doing so on some f***ed up ARM architectures like the EBSA110.  However
+this is not the case on many design I'm aware of, like all SA11x0 based
+ones.
+
+Of course this is a bad idea to rely on the alignment trap to perform
+unaligned memory access in general.  If those access are predictable, you
+are better to use the macros provided by include/asm/unaligned.h.  The
+alignment trap can fixup misaligned access for the exception cases, but at
+a high performance cost.  It better be rare.
+
+Now for user space applications, it is possible to configure the alignment
+trap to SIGBUS any code performing unaligned access (good for debugging bad
+code), or even fixup the access by software like for kernel code.  The later
+mode isn't recommended for performance reasons (just think about the
+floating point emulation that works about the same way).  Fix your code
+instead!
+
+Please note that randomly changing the behaviour without good thought is
+real bad - it changes the behaviour of all unaligned instructions in user
+space, and might cause programs to fail unexpectedly.
+
+To change the alignment trap behavior, simply echo a number into
+/proc/cpu/alignment.  The number is made up from various bits:
+
+===		========================================================
+bit		behavior when set
+===		========================================================
+0		A user process performing an unaligned memory access
+		will cause the kernel to print a message indicating
+		process name, pid, pc, instruction, address, and the
+		fault code.
+
+1		The kernel will attempt to fix up the user process
+		performing the unaligned access.  This is of course
+		slow (think about the floating point emulator) and
+		not recommended for production use.
+
+2		The kernel will send a SIGBUS signal to the user process
+		performing the unaligned access.
+===		========================================================
+
+Note that not all combinations are supported - only values 0 through 5.
+(6 and 7 don't make sense).
+
+For example, the following will turn on the warnings, but without
+fixing up or sending SIGBUS signals::
+
+	echo 1 > /proc/cpu/alignment
+
+You can also read the content of the same file to get statistical
+information on unaligned access occurrences plus the current mode of
+operation for user space code.
+
+
+Nicolas Pitre, Mar 13, 2001.  Modified Russell King, Nov 30, 2001.
diff --git a/Documentation/arch/arm/memory.rst b/Documentation/arch/arm/memory.rst
new file mode 100644
index 0000000000000..0cb1e29388234
--- /dev/null
+++ b/Documentation/arch/arm/memory.rst
@@ -0,0 +1,103 @@
+=================================
+Kernel Memory Layout on ARM Linux
+=================================
+
+		Russell King <rmk@arm.linux.org.uk>
+
+		     November 17, 2005 (2.6.15)
+
+This document describes the virtual memory layout which the Linux
+kernel uses for ARM processors.  It indicates which regions are
+free for platforms to use, and which are used by generic code.
+
+The ARM CPU is capable of addressing a maximum of 4GB virtual memory
+space, and this must be shared between user space processes, the
+kernel, and hardware devices.
+
+As the ARM architecture matures, it becomes necessary to reserve
+certain regions of VM space for use for new facilities; therefore
+this document may reserve more VM space over time.
+
+=============== =============== ===============================================
+Start		End		Use
+=============== =============== ===============================================
+ffff8000	ffffffff	copy_user_page / clear_user_page use.
+				For SA11xx and Xscale, this is used to
+				setup a minicache mapping.
+
+ffff4000	ffffffff	cache aliasing on ARMv6 and later CPUs.
+
+ffff1000	ffff7fff	Reserved.
+				Platforms must not use this address range.
+
+ffff0000	ffff0fff	CPU vector page.
+				The CPU vectors are mapped here if the
+				CPU supports vector relocation (control
+				register V bit.)
+
+fffe0000	fffeffff	XScale cache flush area.  This is used
+				in proc-xscale.S to flush the whole data
+				cache. (XScale does not have TCM.)
+
+fffe8000	fffeffff	DTCM mapping area for platforms with
+				DTCM mounted inside the CPU.
+
+fffe0000	fffe7fff	ITCM mapping area for platforms with
+				ITCM mounted inside the CPU.
+
+ffc80000	ffefffff	Fixmap mapping region.  Addresses provided
+				by fix_to_virt() will be located here.
+
+ffc00000	ffc7ffff	Guard region
+
+ff800000	ffbfffff	Permanent, fixed read-only mapping of the
+				firmware provided DT blob
+
+fee00000	feffffff	Mapping of PCI I/O space. This is a static
+				mapping within the vmalloc space.
+
+VMALLOC_START	VMALLOC_END-1	vmalloc() / ioremap() space.
+				Memory returned by vmalloc/ioremap will
+				be dynamically placed in this region.
+				Machine specific static mappings are also
+				located here through iotable_init().
+				VMALLOC_START is based upon the value
+				of the high_memory variable, and VMALLOC_END
+				is equal to 0xff800000.
+
+PAGE_OFFSET	high_memory-1	Kernel direct-mapped RAM region.
+				This maps the platforms RAM, and typically
+				maps all platform RAM in a 1:1 relationship.
+
+PKMAP_BASE	PAGE_OFFSET-1	Permanent kernel mappings
+				One way of mapping HIGHMEM pages into kernel
+				space.
+
+MODULES_VADDR	MODULES_END-1	Kernel module space
+				Kernel modules inserted via insmod are
+				placed here using dynamic mappings.
+
+TASK_SIZE	MODULES_VADDR-1	KASAn shadow memory when KASan is in use.
+				The range from MODULES_VADDR to the top
+				of the memory is shadowed here with 1 bit
+				per byte of memory.
+
+00001000	TASK_SIZE-1	User space mappings
+				Per-thread mappings are placed here via
+				the mmap() system call.
+
+00000000	00000fff	CPU vector page / null pointer trap
+				CPUs which do not support vector remapping
+				place their vector page here.  NULL pointer
+				dereferences by both the kernel and user
+				space are also caught via this mapping.
+=============== =============== ===============================================
+
+Please note that mappings which collide with the above areas may result
+in a non-bootable kernel, or may cause the kernel to (eventually) panic
+at run time.
+
+Since future CPUs may impact the kernel mapping layout, user programs
+must not access any memory which is not mapped inside their 0x0001000
+to TASK_SIZE address range.  If they wish to access these areas, they
+must set up their own mappings using open() and mmap().
diff --git a/Documentation/arch/arm/microchip.rst b/Documentation/arch/arm/microchip.rst
new file mode 100644
index 0000000000000..e721d855f2c95
--- /dev/null
+++ b/Documentation/arch/arm/microchip.rst
@@ -0,0 +1,230 @@
+=============================
+ARM Microchip SoCs (aka AT91)
+=============================
+
+
+Introduction
+------------
+This document gives useful information about the ARM Microchip SoCs that are
+currently supported in Linux Mainline (you know, the one on kernel.org).
+
+It is important to note that the Microchip (previously Atmel) ARM-based MPU
+product line is historically named "AT91" or "at91" throughout the Linux kernel
+development process even if this product prefix has completely disappeared from
+the official Microchip product name. Anyway, files, directories, git trees,
+git branches/tags and email subject always contain this "at91" sub-string.
+
+
+AT91 SoCs
+---------
+Documentation and detailed datasheet for each product are available on
+the Microchip website: http://www.microchip.com.
+
+  Flavors:
+    * ARM 920 based SoC
+      - at91rm9200
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-1768-32-bit-ARM920T-Embedded-Microprocessor-AT91RM9200_Datasheet.pdf
+
+    * ARM 926 based SoCs
+      - at91sam9260
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6221-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9260_Datasheet.pdf
+
+      - at91sam9xe
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6254-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9XE_Datasheet.pdf
+
+      - at91sam9261
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6062-ARM926EJ-S-Microprocessor-SAM9261_Datasheet.pdf
+
+      - at91sam9263
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6249-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9263_Datasheet.pdf
+
+      - at91sam9rl
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/doc6289.pdf
+
+      - at91sam9g20
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001516A.pdf
+
+      - at91sam9g45 family
+        - at91sam9g45
+        - at91sam9g46
+        - at91sam9m10
+        - at91sam9m11 (device superset)
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6437-32-bit-ARM926-Embedded-Microprocessor-SAM9M11_Datasheet.pdf
+
+      - at91sam9x5 family (aka "The 5 series")
+        - at91sam9g15
+        - at91sam9g25
+        - at91sam9g35
+        - at91sam9x25
+        - at91sam9x35
+
+          * Datasheet (can be considered as covering the whole family)
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11055-32-bit-ARM926EJ-S-Microcontroller-SAM9X35_Datasheet.pdf
+
+      - at91sam9n12
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001517A.pdf
+
+      - sam9x60
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/SAM9X60-Data-Sheet-DS60001579A.pdf
+
+    * ARM Cortex-A5 based SoCs
+      - sama5d3 family
+
+        - sama5d31
+        - sama5d33
+        - sama5d34
+        - sama5d35
+        - sama5d36 (device superset)
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet_B.pdf
+
+    * ARM Cortex-A5 + NEON based SoCs
+      - sama5d4 family
+
+        - sama5d41
+        - sama5d42
+        - sama5d43
+        - sama5d44 (device superset)
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/60001525A.pdf
+
+      - sama5d2 family
+
+        - sama5d21
+        - sama5d22
+        - sama5d23
+        - sama5d24
+        - sama5d26
+        - sama5d27 (device superset)
+        - sama5d28 (device superset + environmental monitors)
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001476B.pdf
+
+    * ARM Cortex-A7 based SoCs
+      - sama7g5 family
+
+        - sama7g51
+        - sama7g52
+        - sama7g53
+        - sama7g54 (device superset)
+
+          * Datasheet
+
+          Coming soon
+
+      - lan966 family
+        - lan9662
+        - lan9668
+
+          * Datasheet
+
+          Coming soon
+
+    * ARM Cortex-M7 MCUs
+      - sams70 family
+
+        - sams70j19
+        - sams70j20
+        - sams70j21
+        - sams70n19
+        - sams70n20
+        - sams70n21
+        - sams70q19
+        - sams70q20
+        - sams70q21
+
+      - samv70 family
+
+        - samv70j19
+        - samv70j20
+        - samv70n19
+        - samv70n20
+        - samv70q19
+        - samv70q20
+
+      - samv71 family
+
+        - samv71j19
+        - samv71j20
+        - samv71j21
+        - samv71n19
+        - samv71n20
+        - samv71n21
+        - samv71q19
+        - samv71q20
+        - samv71q21
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/SAM-E70-S70-V70-V71-Family-Data-Sheet-DS60001527D.pdf
+
+
+Linux kernel information
+------------------------
+Linux kernel mach directory: arch/arm/mach-at91
+MAINTAINERS entry is: "ARM/Microchip (AT91) SoC support"
+
+
+Device Tree for AT91 SoCs and boards
+------------------------------------
+All AT91 SoCs are converted to Device Tree. Since Linux 3.19, these products
+must use this method to boot the Linux kernel.
+
+Work In Progress statement:
+Device Tree files and Device Tree bindings that apply to AT91 SoCs and boards are
+considered as "Unstable". To be completely clear, any at91 binding can change at
+any time. So, be sure to use a Device Tree Binary and a Kernel Image generated from
+the same source tree.
+Please refer to the Documentation/devicetree/bindings/ABI.rst file for a
+definition of a "Stable" binding/ABI.
+This statement will be removed by AT91 MAINTAINERS when appropriate.
+
+Naming conventions and best practice:
+
+- SoCs Device Tree Source Include files are named after the official name of
+  the product (at91sam9g20.dtsi or sama5d33.dtsi for instance).
+- Device Tree Source Include files (.dtsi) are used to collect common nodes that can be
+  shared across SoCs or boards (sama5d3.dtsi or at91sam9x5cm.dtsi for instance).
+  When collecting nodes for a particular peripheral or topic, the identifier have to
+  be placed at the end of the file name, separated with a "_" (at91sam9x5_can.dtsi
+  or sama5d3_gmac.dtsi for example).
+- board Device Tree Source files (.dts) are prefixed by the string "at91-" so
+  that they can be identified easily. Note that some files are historical exceptions
+  to this rule (sama5d3[13456]ek.dts, usb_a9g20.dts or animeo_ip.dts for example).
diff --git a/Documentation/arch/arm/netwinder.rst b/Documentation/arch/arm/netwinder.rst
new file mode 100644
index 0000000000000..8eab66caa2acd
--- /dev/null
+++ b/Documentation/arch/arm/netwinder.rst
@@ -0,0 +1,85 @@
+================================
+NetWinder specific documentation
+================================
+
+The NetWinder is a small low-power computer, primarily designed
+to run Linux.  It is based around the StrongARM RISC processor,
+DC21285 PCI bridge, with PC-type hardware glued around it.
+
+Port usage
+==========
+
+=======  ====== ===============================
+Min      Max	Description
+=======  ====== ===============================
+0x0000   0x000f	DMA1
+0x0020   0x0021	PIC1
+0x0060   0x006f	Keyboard
+0x0070   0x007f	RTC
+0x0080   0x0087	DMA1
+0x0088   0x008f	DMA2
+0x00a0   0x00a3	PIC2
+0x00c0   0x00df	DMA2
+0x0180   0x0187	IRDA
+0x01f0   0x01f6	ide0
+0x0201		Game port
+0x0203		RWA010 configuration read
+0x0220   ?	SoundBlaster
+0x0250   ?	WaveArtist
+0x0279		RWA010 configuration index
+0x02f8   0x02ff	Serial ttyS1
+0x0300   0x031f	Ether10
+0x0338		GPIO1
+0x033a		GPIO2
+0x0370   0x0371	W83977F configuration registers
+0x0388   ?	AdLib
+0x03c0   0x03df	VGA
+0x03f6		ide0
+0x03f8   0x03ff	Serial ttyS0
+0x0400   0x0408	DC21143
+0x0480   0x0487	DMA1
+0x0488   0x048f	DMA2
+0x0a79		RWA010 configuration write
+0xe800   0xe80f	ide0/ide1 BM DMA
+=======  ====== ===============================
+
+
+Interrupt usage
+===============
+
+======= ======= ========================
+IRQ	type	Description
+======= ======= ========================
+ 0	ISA	100Hz timer
+ 1	ISA	Keyboard
+ 2	ISA	cascade
+ 3	ISA	Serial ttyS1
+ 4	ISA	Serial ttyS0
+ 5	ISA	PS/2 mouse
+ 6	ISA	IRDA
+ 7	ISA	Printer
+ 8	ISA	RTC alarm
+ 9	ISA
+10	ISA	GP10 (Orange reset button)
+11	ISA
+12	ISA	WaveArtist
+13	ISA
+14	ISA	hda1
+15	ISA
+======= ======= ========================
+
+DMA usage
+=========
+
+======= ======= ===========
+DMA	type	Description
+======= ======= ===========
+ 0	ISA	IRDA
+ 1	ISA
+ 2	ISA	cascade
+ 3	ISA	WaveArtist
+ 4	ISA
+ 5	ISA
+ 6	ISA
+ 7	ISA	WaveArtist
+======= ======= ===========
diff --git a/Documentation/arch/arm/nwfpe/index.rst b/Documentation/arch/arm/nwfpe/index.rst
new file mode 100644
index 0000000000000..3c4d2f9aa10ee
--- /dev/null
+++ b/Documentation/arch/arm/nwfpe/index.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+NetWinder's floating point emulator
+===================================
+
+.. toctree::
+   :maxdepth: 1
+
+   nwfpe
+   netwinder-fpe
+   notes
+   todo
diff --git a/Documentation/arch/arm/nwfpe/netwinder-fpe.rst b/Documentation/arch/arm/nwfpe/netwinder-fpe.rst
new file mode 100644
index 0000000000000..cbb320960fc44
--- /dev/null
+++ b/Documentation/arch/arm/nwfpe/netwinder-fpe.rst
@@ -0,0 +1,162 @@
+=============
+Current State
+=============
+
+The following describes the current state of the NetWinder's floating point
+emulator.
+
+In the following nomenclature is used to describe the floating point
+instructions.  It follows the conventions in the ARM manual.
+
+::
+
+  <S|D|E> = <single|double|extended>, no default
+  {P|M|Z} = {round to +infinity,round to -infinity,round to zero},
+            default = round to nearest
+
+Note: items enclosed in {} are optional.
+
+Floating Point Coprocessor Data Transfer Instructions (CPDT)
+------------------------------------------------------------
+
+LDF/STF - load and store floating
+
+<LDF|STF>{cond}<S|D|E> Fd, Rn
+<LDF|STF>{cond}<S|D|E> Fd, [Rn, #<expression>]{!}
+<LDF|STF>{cond}<S|D|E> Fd, [Rn], #<expression>
+
+These instructions are fully implemented.
+
+LFM/SFM - load and store multiple floating
+
+Form 1 syntax:
+<LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn]
+<LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn, #<expression>]{!}
+<LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn], #<expression>
+
+Form 2 syntax:
+<LFM|SFM>{cond}<FD,EA> Fd, <count>, [Rn]{!}
+
+These instructions are fully implemented.  They store/load three words
+for each floating point register into the memory location given in the
+instruction.  The format in memory is unlikely to be compatible with
+other implementations, in particular the actual hardware.  Specific
+mention of this is made in the ARM manuals.
+
+Floating Point Coprocessor Register Transfer Instructions (CPRT)
+----------------------------------------------------------------
+
+Conversions, read/write status/control register instructions
+
+FLT{cond}<S,D,E>{P,M,Z} Fn, Rd          Convert integer to floating point
+FIX{cond}{P,M,Z} Rd, Fn                 Convert floating point to integer
+WFS{cond} Rd                            Write floating point status register
+RFS{cond} Rd                            Read floating point status register
+WFC{cond} Rd                            Write floating point control register
+RFC{cond} Rd                            Read floating point control register
+
+FLT/FIX are fully implemented.
+
+RFS/WFS are fully implemented.
+
+RFC/WFC are fully implemented.  RFC/WFC are supervisor only instructions, and
+presently check the CPU mode, and do an invalid instruction trap if not called
+from supervisor mode.
+
+Compare instructions
+
+CMF{cond} Fn, Fm        Compare floating
+CMFE{cond} Fn, Fm       Compare floating with exception
+CNF{cond} Fn, Fm        Compare negated floating
+CNFE{cond} Fn, Fm       Compare negated floating with exception
+
+These are fully implemented.
+
+Floating Point Coprocessor Data Instructions (CPDT)
+---------------------------------------------------
+
+Dyadic operations:
+
+ADF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - add
+SUF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - subtract
+RSF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse subtract
+MUF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - multiply
+DVF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - divide
+RDV{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse divide
+
+These are fully implemented.
+
+FML{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast multiply
+FDV{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast divide
+FRD{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast reverse divide
+
+These are fully implemented as well.  They use the same algorithm as the
+non-fast versions.  Hence, in this implementation their performance is
+equivalent to the MUF/DVF/RDV instructions.  This is acceptable according
+to the ARM manual.  The manual notes these are defined only for single
+operands, on the actual FPA11 hardware they do not work for double or
+extended precision operands.  The emulator currently does not check
+the requested permissions conditions, and performs the requested operation.
+
+RMF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - IEEE remainder
+
+This is fully implemented.
+
+Monadic operations:
+
+MVF{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - move
+MNF{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - move negated
+
+These are fully implemented.
+
+ABS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - absolute value
+SQT{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - square root
+RND{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - round
+
+These are fully implemented.
+
+URD{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - unnormalized round
+NRM{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - normalize
+
+These are implemented.  URD is implemented using the same code as the RND
+instruction.  Since URD cannot return a unnormalized number, NRM becomes
+a NOP.
+
+Library calls:
+
+POW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - power
+RPW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse power
+POL{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - polar angle (arctan2)
+
+LOG{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base 10
+LGN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base e
+EXP{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - exponent
+SIN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - sine
+COS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - cosine
+TAN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - tangent
+ASN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arcsine
+ACS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arccosine
+ATN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arctangent
+
+These are not implemented.  They are not currently issued by the compiler,
+and are handled by routines in libc.  These are not implemented by the FPA11
+hardware, but are handled by the floating point support code.  They should
+be implemented in future versions.
+
+Signalling:
+
+Signals are implemented.  However current ELF kernels produced by Rebel.com
+have a bug in them that prevents the module from generating a SIGFPE.  This
+is caused by a failure to alias fp_current to the kernel variable
+current_set[0] correctly.
+
+The kernel provided with this distribution (vmlinux-nwfpe-0.93) contains
+a fix for this problem and also incorporates the current version of the
+emulator directly.  It is possible to run with no floating point module
+loaded with this kernel.  It is provided as a demonstration of the
+technology and for those who want to do floating point work that depends
+on signals.  It is not strictly necessary to use the module.
+
+A module (either the one provided by Russell King, or the one in this
+distribution) can be loaded to replace the functionality of the emulator
+built into the kernel.
diff --git a/Documentation/arch/arm/nwfpe/notes.rst b/Documentation/arch/arm/nwfpe/notes.rst
new file mode 100644
index 0000000000000..102e55af8439a
--- /dev/null
+++ b/Documentation/arch/arm/nwfpe/notes.rst
@@ -0,0 +1,32 @@
+Notes
+=====
+
+There seems to be a problem with exp(double) and our emulator.  I haven't
+been able to track it down yet.  This does not occur with the emulator
+supplied by Russell King.
+
+I also found one oddity in the emulator.  I don't think it is serious but
+will point it out.  The ARM calling conventions require floating point
+registers f4-f7 to be preserved over a function call.  The compiler quite
+often uses an stfe instruction to save f4 on the stack upon entry to a
+function, and an ldfe instruction to restore it before returning.
+
+I was looking at some code, that calculated a double result, stored it in f4
+then made a function call. Upon return from the function call the number in
+f4 had been converted to an extended value in the emulator.
+
+This is a side effect of the stfe instruction.  The double in f4 had to be
+converted to extended, then stored.  If an lfm/sfm combination had been used,
+then no conversion would occur.  This has performance considerations.  The
+result from the function call and f4 were used in a multiplication.  If the
+emulator sees a multiply of a double and extended, it promotes the double to
+extended, then does the multiply in extended precision.
+
+This code will cause this problem:
+
+double x, y, z;
+z = log(x)/log(y);
+
+The result of log(x) (a double) will be calculated, returned in f0, then
+moved to f4 to preserve it over the log(y) call.  The division will be done
+in extended precision, due to the stfe instruction used to save f4 in log(y).
diff --git a/Documentation/arch/arm/nwfpe/nwfpe.rst b/Documentation/arch/arm/nwfpe/nwfpe.rst
new file mode 100644
index 0000000000000..35cd90dacbfff
--- /dev/null
+++ b/Documentation/arch/arm/nwfpe/nwfpe.rst
@@ -0,0 +1,74 @@
+Introduction
+============
+
+This directory contains the version 0.92 test release of the NetWinder
+Floating Point Emulator.
+
+The majority of the code was written by me, Scott Bambrough It is
+written in C, with a small number of routines in inline assembler
+where required.  It was written quickly, with a goal of implementing a
+working version of all the floating point instructions the compiler
+emits as the first target.  I have attempted to be as optimal as
+possible, but there remains much room for improvement.
+
+I have attempted to make the emulator as portable as possible.  One of
+the problems is with leading underscores on kernel symbols.  Elf
+kernels have no leading underscores, a.out compiled kernels do.  I
+have attempted to use the C_SYMBOL_NAME macro wherever this may be
+important.
+
+Another choice I made was in the file structure.  I have attempted to
+contain all operating system specific code in one module (fpmodule.*).
+All the other files contain emulator specific code.  This should allow
+others to port the emulator to NetBSD for instance relatively easily.
+
+The floating point operations are based on SoftFloat Release 2, by
+John Hauser.  SoftFloat is a software implementation of floating-point
+that conforms to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic.  As many as four formats are supported: single precision,
+double precision, extended double precision, and quadruple precision.
+All operations required by the standard are implemented, except for
+conversions to and from decimal.  We use only the single precision,
+double precision and extended double precision formats.  The port of
+SoftFloat to the ARM was done by Phil Blundell, based on an earlier
+port of SoftFloat version 1 by Neil Carson for NetBSD/arm32.
+
+The file README.FPE contains a description of what has been implemented
+so far in the emulator.  The file TODO contains a information on what
+remains to be done, and other ideas for the emulator.
+
+Bug reports, comments, suggestions should be directed to me at
+<scottb@netwinder.org>.  General reports of "this program doesn't
+work correctly when your emulator is installed" are useful for
+determining that bugs still exist; but are virtually useless when
+attempting to isolate the problem.  Please report them, but don't
+expect quick action.  Bugs still exist.  The problem remains in isolating
+which instruction contains the bug.  Small programs illustrating a specific
+problem are a godsend.
+
+Legal Notices
+-------------
+
+The NetWinder Floating Point Emulator is free software.  Everything Rebel.com
+has written is provided under the GNU GPL.  See the file COPYING for copying
+conditions.  Excluded from the above is the SoftFloat code.  John Hauser's
+legal notice for SoftFloat is included below.
+
+-------------------------------------------------------------------------------
+
+SoftFloat Legal Notice
+
+SoftFloat was written by John R. Hauser.  This work was made possible in
+part by the International Computer Science Institute, located at Suite 600,
+1947 Center Street, Berkeley, California 94704.  Funding was partially
+provided by the National Science Foundation under grant MIP-9311980.  The
+original version of this code was written as part of a project to build
+a fixed-point vector processor in collaboration with the University of
+California at Berkeley, overseen by Profs. Nelson Morgan and John Wawrzynek.
+
+THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
+has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
+TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
+PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
+AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
+-------------------------------------------------------------------------------
diff --git a/Documentation/arch/arm/nwfpe/todo.rst b/Documentation/arch/arm/nwfpe/todo.rst
new file mode 100644
index 0000000000000..393f11b145408
--- /dev/null
+++ b/Documentation/arch/arm/nwfpe/todo.rst
@@ -0,0 +1,72 @@
+TODO LIST
+=========
+
+::
+
+  POW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - power
+  RPW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse power
+  POL{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - polar angle (arctan2)
+
+  LOG{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base 10
+  LGN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base e
+  EXP{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - exponent
+  SIN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - sine
+  COS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - cosine
+  TAN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - tangent
+  ASN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arcsine
+  ACS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arccosine
+  ATN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arctangent
+
+These are not implemented.  They are not currently issued by the compiler,
+and are handled by routines in libc.  These are not implemented by the FPA11
+hardware, but are handled by the floating point support code.  They should
+be implemented in future versions.
+
+There are a couple of ways to approach the implementation of these.  One
+method would be to use accurate table methods for these routines.  I have
+a couple of papers by S. Gal from IBM's research labs in Haifa, Israel that
+seem to promise extreme accuracy (in the order of 99.8%) and reasonable speed.
+These methods are used in GLIBC for some of the transcendental functions.
+
+Another approach, which I know little about is CORDIC.  This stands for
+Coordinate Rotation Digital Computer, and is a method of computing
+transcendental functions using mostly shifts and adds and a few
+multiplications and divisions.  The ARM excels at shifts and adds,
+so such a method could be promising, but requires more research to
+determine if it is feasible.
+
+Rounding Methods
+----------------
+
+The IEEE standard defines 4 rounding modes.  Round to nearest is the
+default, but rounding to + or - infinity or round to zero are also allowed.
+Many architectures allow the rounding mode to be specified by modifying bits
+in a control register.  Not so with the ARM FPA11 architecture.  To change
+the rounding mode one must specify it with each instruction.
+
+This has made porting some benchmarks difficult.  It is possible to
+introduce such a capability into the emulator.  The FPCR contains
+bits describing the rounding mode.  The emulator could be altered to
+examine a flag, which if set forced it to ignore the rounding mode in
+the instruction, and use the mode specified in the bits in the FPCR.
+
+This would require a method of getting/setting the flag, and the bits
+in the FPCR.  This requires a kernel call in ArmLinux, as WFC/RFC are
+supervisor only instructions.  If anyone has any ideas or comments I
+would like to hear them.
+
+NOTE:
+ pulled out from some docs on ARM floating point, specifically
+ for the Acorn FPE, but not limited to it:
+
+ The floating point control register (FPCR) may only be present in some
+ implementations: it is there to control the hardware in an implementation-
+ specific manner, for example to disable the floating point system.  The user
+ mode of the ARM is not permitted to use this register (since the right is
+ reserved to alter it between implementations) and the WFC and RFC
+ instructions will trap if tried in user mode.
+
+ Hence, the answer is yes, you could do this, but then you will run a high
+ risk of becoming isolated if and when hardware FP emulation comes out
+
+		-- Russell.
diff --git a/Documentation/arch/arm/omap/dss.rst b/Documentation/arch/arm/omap/dss.rst
new file mode 100644
index 0000000000000..a40c4d9c717a7
--- /dev/null
+++ b/Documentation/arch/arm/omap/dss.rst
@@ -0,0 +1,372 @@
+=========================
+OMAP2/3 Display Subsystem
+=========================
+
+This is an almost total rewrite of the OMAP FB driver in drivers/video/omap
+(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI,
+TV-out and multiple display support, but there are lots of small improvements
+also.
+
+The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB,
+panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live
+currently side by side, you can choose which one to use.
+
+Features
+--------
+
+Working and tested features include:
+
+- MIPI DPI (parallel) output
+- MIPI DSI output in command mode
+- MIPI DBI (RFBI) output
+- SDI output
+- TV output
+- All pieces can be compiled as a module or inside kernel
+- Use DISPC to update any of the outputs
+- Use CPU to update RFBI or DSI output
+- OMAP DISPC planes
+- RGB16, RGB24 packed, RGB24 unpacked
+- YUV2, UYVY
+- Scaling
+- Adjusting DSS FCK to find a good pixel clock
+- Use DSI DPLL to create DSS FCK
+
+Tested boards include:
+- OMAP3 SDP board
+- Beagle board
+- N810
+
+omapdss driver
+--------------
+
+The DSS driver does not itself have any support for Linux framebuffer, V4L or
+such like the current ones, but it has an internal kernel API that upper level
+drivers can use.
+
+The DSS driver models OMAP's overlays, overlay managers and displays in a
+flexible way to enable non-common multi-display configuration. In addition to
+modelling the hardware overlays, omapdss supports virtual overlays and overlay
+managers. These can be used when updating a display with CPU or system DMA.
+
+omapdss driver support for audio
+--------------------------------
+There exist several display technologies and standards that support audio as
+well. Hence, it is relevant to update the DSS device driver to provide an audio
+interface that may be used by an audio driver or any other driver interested in
+the functionality.
+
+The audio_enable function is intended to prepare the relevant
+IP for playback (e.g., enabling an audio FIFO, taking in/out of reset
+some IP, enabling companion chips, etc). It is intended to be called before
+audio_start. The audio_disable function performs the reverse operation and is
+intended to be called after audio_stop.
+
+While a given DSS device driver may support audio, it is possible that for
+certain configurations audio is not supported (e.g., an HDMI display using a
+VESA video timing). The audio_supported function is intended to query whether
+the current configuration of the display supports audio.
+
+The audio_config function is intended to configure all the relevant audio
+parameters of the display. In order to make the function independent of any
+specific DSS device driver, a struct omap_dss_audio is defined. Its purpose
+is to contain all the required parameters for audio configuration. At the
+moment, such structure contains pointers to IEC-60958 channel status word
+and CEA-861 audio infoframe structures. This should be enough to support
+HDMI and DisplayPort, as both are based on CEA-861 and IEC-60958.
+
+The audio_enable/disable, audio_config and audio_supported functions could be
+implemented as functions that may sleep. Hence, they should not be called
+while holding a spinlock or a readlock.
+
+The audio_start/audio_stop function is intended to effectively start/stop audio
+playback after the configuration has taken place. These functions are designed
+to be used in an atomic context. Hence, audio_start should return quickly and be
+called only after all the needed resources for audio playback (audio FIFOs,
+DMA channels, companion chips, etc) have been enabled to begin data transfers.
+audio_stop is designed to only stop the audio transfers. The resources used
+for playback are released using audio_disable.
+
+The enum omap_dss_audio_state may be used to help the implementations of
+the interface to keep track of the audio state. The initial state is _DISABLED;
+then, the state transitions to _CONFIGURED, and then, when it is ready to
+play audio, to _ENABLED. The state _PLAYING is used when the audio is being
+rendered.
+
+
+Panel and controller drivers
+----------------------------
+
+The drivers implement panel or controller specific functionality and are not
+usually visible to users except through omapfb driver.  They register
+themselves to the DSS driver.
+
+omapfb driver
+-------------
+
+The omapfb driver implements arbitrary number of standard linux framebuffers.
+These framebuffers can be routed flexibly to any overlays, thus allowing very
+dynamic display architecture.
+
+The driver exports some omapfb specific ioctls, which are compatible with the
+ioctls in the old driver.
+
+The rest of the non standard features are exported via sysfs. Whether the final
+implementation will use sysfs, or ioctls, is still open.
+
+V4L2 drivers
+------------
+
+V4L2 is being implemented in TI.
+
+From omapdss point of view the V4L2 drivers should be similar to framebuffer
+driver.
+
+Architecture
+--------------------
+
+Some clarification what the different components do:
+
+    - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the
+      pixel data for the image. Framebuffer has width and height and color
+      depth.
+    - Overlay defines where the pixels are read from and where they go on the
+      screen. The overlay may be smaller than framebuffer, thus displaying only
+      part of the framebuffer. The position of the overlay may be changed if
+      the overlay is smaller than the display.
+    - Overlay manager combines the overlays in to one image and feeds them to
+      display.
+    - Display is the actual physical display device.
+
+A framebuffer can be connected to multiple overlays to show the same pixel data
+on all of the overlays. Note that in this case the overlay input sizes must be
+the same, but, in case of video overlays, the output size can be different. Any
+framebuffer can be connected to any overlay.
+
+An overlay can be connected to one overlay manager. Also DISPC overlays can be
+connected only to DISPC overlay managers, and virtual overlays can be only
+connected to virtual overlays.
+
+An overlay manager can be connected to one display. There are certain
+restrictions which kinds of displays an overlay manager can be connected:
+
+    - DISPC TV overlay manager can be only connected to TV display.
+    - Virtual overlay managers can only be connected to DBI or DSI displays.
+    - DISPC LCD overlay manager can be connected to all displays, except TV
+      display.
+
+Sysfs
+-----
+The sysfs interface is mainly used for testing. I don't think sysfs
+interface is the best for this in the final version, but I don't quite know
+what would be the best interfaces for these things.
+
+The sysfs interface is divided to two parts: DSS and FB.
+
+/sys/class/graphics/fb? directory:
+mirror		0=off, 1=on
+rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
+rotate_type	0 = DMA rotation, 1 = VRFB rotation
+overlays	List of overlay numbers to which framebuffer pixels go
+phys_addr	Physical address of the framebuffer
+virt_addr	Virtual address of the framebuffer
+size		Size of the framebuffer
+
+/sys/devices/platform/omapdss/overlay? directory:
+enabled		0=off, 1=on
+input_size	width,height (ie. the framebuffer size)
+manager		Destination overlay manager name
+name
+output_size	width,height
+position	x,y
+screen_width	width
+global_alpha   	global alpha 0-255 0=transparent 255=opaque
+
+/sys/devices/platform/omapdss/manager? directory:
+display				Destination display
+name
+alpha_blending_enabled		0=off, 1=on
+trans_key_enabled		0=off, 1=on
+trans_key_type			gfx-destination, video-source
+trans_key_value			transparency color key (RGB24)
+default_color			default background color (RGB24)
+
+/sys/devices/platform/omapdss/display? directory:
+
+=============== =============================================================
+ctrl_name	Controller name
+mirror		0=off, 1=on
+update_mode	0=off, 1=auto, 2=manual
+enabled		0=off, 1=on
+name
+rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
+timings		Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw)
+		When writing, two special timings are accepted for tv-out:
+		"pal" and "ntsc"
+panel_name
+tear_elim	Tearing elimination 0=off, 1=on
+output_type	Output type (video encoder only): "composite" or "svideo"
+=============== =============================================================
+
+There are also some debugfs files at <debugfs>/omapdss/ which show information
+about clocks and registers.
+
+Examples
+--------
+
+The following definitions have been made for the examples below::
+
+	ovl0=/sys/devices/platform/omapdss/overlay0
+	ovl1=/sys/devices/platform/omapdss/overlay1
+	ovl2=/sys/devices/platform/omapdss/overlay2
+
+	mgr0=/sys/devices/platform/omapdss/manager0
+	mgr1=/sys/devices/platform/omapdss/manager1
+
+	lcd=/sys/devices/platform/omapdss/display0
+	dvi=/sys/devices/platform/omapdss/display1
+	tv=/sys/devices/platform/omapdss/display2
+
+	fb0=/sys/class/graphics/fb0
+	fb1=/sys/class/graphics/fb1
+	fb2=/sys/class/graphics/fb2
+
+Default setup on OMAP3 SDP
+--------------------------
+
+Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI
+and TV-out are not in use. The columns from left to right are:
+framebuffers, overlays, overlay managers, displays. Framebuffers are
+handled by omapfb, and the rest by the DSS::
+
+	FB0 --- GFX  -\            DVI
+	FB1 --- VID1 --+- LCD ---- LCD
+	FB2 --- VID2 -/   TV ----- TV
+
+Example: Switch from LCD to DVI
+-------------------------------
+
+::
+
+	w=`cat $dvi/timings | cut -d "," -f 2 | cut -d "/" -f 1`
+	h=`cat $dvi/timings | cut -d "," -f 3 | cut -d "/" -f 1`
+
+	echo "0" > $lcd/enabled
+	echo "" > $mgr0/display
+	fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h
+	# at this point you have to switch the dvi/lcd dip-switch from the omap board
+	echo "dvi" > $mgr0/display
+	echo "1" > $dvi/enabled
+
+After this the configuration looks like:::
+
+	FB0 --- GFX  -\         -- DVI
+	FB1 --- VID1 --+- LCD -/   LCD
+	FB2 --- VID2 -/   TV ----- TV
+
+Example: Clone GFX overlay to LCD and TV
+----------------------------------------
+
+::
+
+	w=`cat $tv/timings | cut -d "," -f 2 | cut -d "/" -f 1`
+	h=`cat $tv/timings | cut -d "," -f 3 | cut -d "/" -f 1`
+
+	echo "0" > $ovl0/enabled
+	echo "0" > $ovl1/enabled
+
+	echo "" > $fb1/overlays
+	echo "0,1" > $fb0/overlays
+
+	echo "$w,$h" > $ovl1/output_size
+	echo "tv" > $ovl1/manager
+
+	echo "1" > $ovl0/enabled
+	echo "1" > $ovl1/enabled
+
+	echo "1" > $tv/enabled
+
+After this the configuration looks like (only relevant parts shown)::
+
+	FB0 +-- GFX  ---- LCD ---- LCD
+	\- VID1 ---- TV  ---- TV
+
+Misc notes
+----------
+
+OMAP FB allocates the framebuffer memory using the standard dma allocator. You
+can enable Contiguous Memory Allocator (CONFIG_CMA) to improve the dma
+allocator, and if CMA is enabled, you use "cma=" kernel parameter to increase
+the global memory area for CMA.
+
+Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
+of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI.
+
+Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB
+does not support mirroring.
+
+VRFB rotation requires much more memory than non-rotated framebuffer, so you
+probably need to increase your vram setting before using VRFB rotation. Also,
+many applications may not work with VRFB if they do not pay attention to all
+framebuffer parameters.
+
+Kernel boot arguments
+---------------------
+
+omapfb.mode=<display>:<mode>[,...]
+	- Default video mode for specified displays. For example,
+	  "dvi:800x400MR-24@60".  See drivers/video/modedb.c.
+	  There are also two special modes: "pal" and "ntsc" that
+	  can be used to tv out.
+
+omapfb.vram=<fbnum>:<size>[@<physaddr>][,...]
+	- VRAM allocated for a framebuffer. Normally omapfb allocates vram
+	  depending on the display size. With this you can manually allocate
+	  more or define the physical address of each framebuffer. For example,
+	  "1:4M" to allocate 4M for fb1.
+
+omapfb.debug=<y|n>
+	- Enable debug printing. You have to have OMAPFB debug support enabled
+	  in kernel config.
+
+omapfb.test=<y|n>
+	- Draw test pattern to framebuffer whenever framebuffer settings change.
+	  You need to have OMAPFB debug support enabled in kernel config.
+
+omapfb.vrfb=<y|n>
+	- Use VRFB rotation for all framebuffers.
+
+omapfb.rotate=<angle>
+	- Default rotation applied to all framebuffers.
+	  0 - 0 degree rotation
+	  1 - 90 degree rotation
+	  2 - 180 degree rotation
+	  3 - 270 degree rotation
+
+omapfb.mirror=<y|n>
+	- Default mirror for all framebuffers. Only works with DMA rotation.
+
+omapdss.def_disp=<display>
+	- Name of default display, to which all overlays will be connected.
+	  Common examples are "lcd" or "tv".
+
+omapdss.debug=<y|n>
+	- Enable debug printing. You have to have DSS debug support enabled in
+	  kernel config.
+
+TODO
+----
+
+DSS locking
+
+Error checking
+
+- Lots of checks are missing or implemented just as BUG()
+
+System DMA update for DSI
+
+- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how
+  to skip the empty byte?)
+
+OMAP1 support
+
+- Not sure if needed
diff --git a/Documentation/arch/arm/omap/index.rst b/Documentation/arch/arm/omap/index.rst
new file mode 100644
index 0000000000000..8b365b212e492
--- /dev/null
+++ b/Documentation/arch/arm/omap/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======
+TI OMAP
+=======
+
+.. toctree::
+   :maxdepth: 1
+
+   omap
+   omap_pm
+   dss
diff --git a/Documentation/arch/arm/omap/omap.rst b/Documentation/arch/arm/omap/omap.rst
new file mode 100644
index 0000000000000..f440c0f4613fc
--- /dev/null
+++ b/Documentation/arch/arm/omap/omap.rst
@@ -0,0 +1,18 @@
+============
+OMAP history
+============
+
+This file contains documentation for running mainline
+kernel on omaps.
+
+======		======================================================
+KERNEL		NEW DEPENDENCIES
+======		======================================================
+v4.3+		Update is needed for custom .config files to make sure
+		CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work
+		properly.
+
+v4.18+		Update is needed for custom .config files to make sure
+		CONFIG_MMC_SDHCI_OMAP is enabled for all MMC instances
+		to work in DRA7 and K2G based boards.
+======		======================================================
diff --git a/Documentation/arch/arm/omap/omap_pm.rst b/Documentation/arch/arm/omap/omap_pm.rst
new file mode 100644
index 0000000000000..a335e4c8ce2cc
--- /dev/null
+++ b/Documentation/arch/arm/omap/omap_pm.rst
@@ -0,0 +1,165 @@
+=====================
+The OMAP PM interface
+=====================
+
+This document describes the temporary OMAP PM interface.  Driver
+authors use these functions to communicate minimum latency or
+throughput constraints to the kernel power management code.
+Over time, the intention is to merge features from the OMAP PM
+interface into the Linux PM QoS code.
+
+Drivers need to express PM parameters which:
+
+- support the range of power management parameters present in the TI SRF;
+
+- separate the drivers from the underlying PM parameter
+  implementation, whether it is the TI SRF or Linux PM QoS or Linux
+  latency framework or something else;
+
+- specify PM parameters in terms of fundamental units, such as
+  latency and throughput, rather than units which are specific to OMAP
+  or to particular OMAP variants;
+
+- allow drivers which are shared with other architectures (e.g.,
+  DaVinci) to add these constraints in a way which won't affect non-OMAP
+  systems,
+
+- can be implemented immediately with minimal disruption of other
+  architectures.
+
+
+This document proposes the OMAP PM interface, including the following
+five power management functions for driver code:
+
+1. Set the maximum MPU wakeup latency::
+
+   (*pdata->set_max_mpu_wakeup_lat)(struct device *dev, unsigned long t)
+
+2. Set the maximum device wakeup latency::
+
+   (*pdata->set_max_dev_wakeup_lat)(struct device *dev, unsigned long t)
+
+3. Set the maximum system DMA transfer start latency (CORE pwrdm)::
+
+   (*pdata->set_max_sdma_lat)(struct device *dev, long t)
+
+4. Set the minimum bus throughput needed by a device::
+
+   (*pdata->set_min_bus_tput)(struct device *dev, u8 agent_id, unsigned long r)
+
+5. Return the number of times the device has lost context::
+
+   (*pdata->get_dev_context_loss_count)(struct device *dev)
+
+
+Further documentation for all OMAP PM interface functions can be
+found in arch/arm/plat-omap/include/mach/omap-pm.h.
+
+
+The OMAP PM layer is intended to be temporary
+---------------------------------------------
+
+The intention is that eventually the Linux PM QoS layer should support
+the range of power management features present in OMAP3.  As this
+happens, existing drivers using the OMAP PM interface can be modified
+to use the Linux PM QoS code; and the OMAP PM interface can disappear.
+
+
+Driver usage of the OMAP PM functions
+-------------------------------------
+
+As the 'pdata' in the above examples indicates, these functions are
+exposed to drivers through function pointers in driver .platform_data
+structures.  The function pointers are initialized by the `board-*.c`
+files to point to the corresponding OMAP PM functions:
+
+- set_max_dev_wakeup_lat will point to
+  omap_pm_set_max_dev_wakeup_lat(), etc.  Other architectures which do
+  not support these functions should leave these function pointers set
+  to NULL.  Drivers should use the following idiom::
+
+        if (pdata->set_max_dev_wakeup_lat)
+            (*pdata->set_max_dev_wakeup_lat)(dev, t);
+
+The most common usage of these functions will probably be to specify
+the maximum time from when an interrupt occurs, to when the device
+becomes accessible.  To accomplish this, driver writers should use the
+set_max_mpu_wakeup_lat() function to constrain the MPU wakeup
+latency, and the set_max_dev_wakeup_lat() function to constrain the
+device wakeup latency (from clk_enable() to accessibility).  For
+example::
+
+        /* Limit MPU wakeup latency */
+        if (pdata->set_max_mpu_wakeup_lat)
+            (*pdata->set_max_mpu_wakeup_lat)(dev, tc);
+
+        /* Limit device powerdomain wakeup latency */
+        if (pdata->set_max_dev_wakeup_lat)
+            (*pdata->set_max_dev_wakeup_lat)(dev, td);
+
+        /* total wakeup latency in this example: (tc + td) */
+
+The PM parameters can be overwritten by calling the function again
+with the new value.  The settings can be removed by calling the
+function with a t argument of -1 (except in the case of
+set_max_bus_tput(), which should be called with an r argument of 0).
+
+The fifth function above, omap_pm_get_dev_context_loss_count(),
+is intended as an optimization to allow drivers to determine whether the
+device has lost its internal context.  If context has been lost, the
+driver must restore its internal context before proceeding.
+
+
+Other specialized interface functions
+-------------------------------------
+
+The five functions listed above are intended to be usable by any
+device driver.  DSPBridge and CPUFreq have a few special requirements.
+DSPBridge expresses target DSP performance levels in terms of OPP IDs.
+CPUFreq expresses target MPU performance levels in terms of MPU
+frequency.  The OMAP PM interface contains functions for these
+specialized cases to convert that input information (OPPs/MPU
+frequency) into the form that the underlying power management
+implementation needs:
+
+6. `(*pdata->dsp_get_opp_table)(void)`
+
+7. `(*pdata->dsp_set_min_opp)(u8 opp_id)`
+
+8. `(*pdata->dsp_get_opp)(void)`
+
+9. `(*pdata->cpu_get_freq_table)(void)`
+
+10. `(*pdata->cpu_set_freq)(unsigned long f)`
+
+11. `(*pdata->cpu_get_freq)(void)`
+
+Customizing OPP for platform
+============================
+Defining CONFIG_PM should enable OPP layer for the silicon
+and the registration of OPP table should take place automatically.
+However, in special cases, the default OPP table may need to be
+tweaked, for e.g.:
+
+ * enable default OPPs which are disabled by default, but which
+   could be enabled on a platform
+ * Disable an unsupported OPP on the platform
+ * Define and add a custom opp table entry
+   in these cases, the board file needs to do additional steps as follows:
+
+arch/arm/mach-omapx/board-xyz.c::
+
+	#include "pm.h"
+	....
+	static void __init omap_xyz_init_irq(void)
+	{
+		....
+		/* Initialize the default table */
+		omapx_opp_init();
+		/* Do customization to the defaults */
+		....
+	}
+
+NOTE:
+  omapx_opp_init will be omap3_opp_init or as required
+  based on the omap family.
diff --git a/Documentation/arch/arm/porting.rst b/Documentation/arch/arm/porting.rst
new file mode 100644
index 0000000000000..bd21958bdb2d5
--- /dev/null
+++ b/Documentation/arch/arm/porting.rst
@@ -0,0 +1,137 @@
+=======
+Porting
+=======
+
+Taken from list archive at http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2001-July/004064.html
+
+Initial definitions
+-------------------
+
+The following symbol definitions rely on you knowing the translation that
+__virt_to_phys() does for your machine.  This macro converts the passed
+virtual address to a physical address.  Normally, it is simply:
+
+		phys = virt - PAGE_OFFSET + PHYS_OFFSET
+
+
+Decompressor Symbols
+--------------------
+
+ZTEXTADDR
+	Start address of decompressor.  There's no point in talking about
+	virtual or physical addresses here, since the MMU will be off at
+	the time when you call the decompressor code.  You normally call
+	the kernel at this address to start it booting.  This doesn't have
+	to be located in RAM, it can be in flash or other read-only or
+	read-write addressable medium.
+
+ZBSSADDR
+	Start address of zero-initialised work area for the decompressor.
+	This must be pointing at RAM.  The decompressor will zero initialise
+	this for you.  Again, the MMU will be off.
+
+ZRELADDR
+	This is the address where the decompressed kernel will be written,
+	and eventually executed.  The following constraint must be valid:
+
+		__virt_to_phys(TEXTADDR) == ZRELADDR
+
+	The initial part of the kernel is carefully coded to be position
+	independent.
+
+INITRD_PHYS
+	Physical address to place the initial RAM disk.  Only relevant if
+	you are using the bootpImage stuff (which only works on the old
+	struct param_struct).
+
+INITRD_VIRT
+	Virtual address of the initial RAM disk.  The following  constraint
+	must be valid:
+
+		__virt_to_phys(INITRD_VIRT) == INITRD_PHYS
+
+PARAMS_PHYS
+	Physical address of the struct param_struct or tag list, giving the
+	kernel various parameters about its execution environment.
+
+
+Kernel Symbols
+--------------
+
+PHYS_OFFSET
+	Physical start address of the first bank of RAM.
+
+PAGE_OFFSET
+	Virtual start address of the first bank of RAM.  During the kernel
+	boot phase, virtual address PAGE_OFFSET will be mapped to physical
+	address PHYS_OFFSET, along with any other mappings you supply.
+	This should be the same value as TASK_SIZE.
+
+TASK_SIZE
+	The maximum size of a user process in bytes.  Since user space
+	always starts at zero, this is the maximum address that a user
+	process can access+1.  The user space stack grows down from this
+	address.
+
+	Any virtual address below TASK_SIZE is deemed to be user process
+	area, and therefore managed dynamically on a process by process
+	basis by the kernel.  I'll call this the user segment.
+
+	Anything above TASK_SIZE is common to all processes.  I'll call
+	this the kernel segment.
+
+	(In other words, you can't put IO mappings below TASK_SIZE, and
+	hence PAGE_OFFSET).
+
+TEXTADDR
+	Virtual start address of kernel, normally PAGE_OFFSET + 0x8000.
+	This is where the kernel image ends up.  With the latest kernels,
+	it must be located at 32768 bytes into a 128MB region.  Previous
+	kernels placed a restriction of 256MB here.
+
+DATAADDR
+	Virtual address for the kernel data segment.  Must not be defined
+	when using the decompressor.
+
+VMALLOC_START / VMALLOC_END
+	Virtual addresses bounding the vmalloc() area.  There must not be
+	any static mappings in this area; vmalloc will overwrite them.
+	The addresses must also be in the kernel segment (see above).
+	Normally, the vmalloc() area starts VMALLOC_OFFSET bytes above the
+	last virtual RAM address (found using variable high_memory).
+
+VMALLOC_OFFSET
+	Offset normally incorporated into VMALLOC_START to provide a hole
+	between virtual RAM and the vmalloc area.  We do this to allow
+	out of bounds memory accesses (eg, something writing off the end
+	of the mapped memory map) to be caught.  Normally set to 8MB.
+
+Architecture Specific Macros
+----------------------------
+
+BOOT_MEM(pram,pio,vio)
+	`pram` specifies the physical start address of RAM.  Must always
+	be present, and should be the same as PHYS_OFFSET.
+
+	`pio` is the physical address of an 8MB region containing IO for
+	use with the debugging macros in arch/arm/kernel/debug-armv.S.
+
+	`vio` is the virtual address of the 8MB debugging region.
+
+	It is expected that the debugging region will be re-initialised
+	by the architecture specific code later in the code (via the
+	MAPIO function).
+
+BOOT_PARAMS
+	Same as, and see PARAMS_PHYS.
+
+FIXUP(func)
+	Machine specific fixups, run before memory subsystems have been
+	initialised.
+
+MAPIO(func)
+	Machine specific function to map IO areas (including the debug
+	region above).
+
+INITIRQ(func)
+	Machine specific function to initialise interrupts.
diff --git a/Documentation/arch/arm/pxa/mfp.rst b/Documentation/arch/arm/pxa/mfp.rst
new file mode 100644
index 0000000000000..ac34e5d7ee44c
--- /dev/null
+++ b/Documentation/arch/arm/pxa/mfp.rst
@@ -0,0 +1,288 @@
+==============================================
+MFP Configuration for PXA2xx/PXA3xx Processors
+==============================================
+
+			Eric Miao <eric.miao@marvell.com>
+
+MFP stands for Multi-Function Pin, which is the pin-mux logic on PXA3xx and
+later PXA series processors.  This document describes the existing MFP API,
+and how board/platform driver authors could make use of it.
+
+Basic Concept
+=============
+
+Unlike the GPIO alternate function settings on PXA25x and PXA27x, a new MFP
+mechanism is introduced from PXA3xx to completely move the pin-mux functions
+out of the GPIO controller. In addition to pin-mux configurations, the MFP
+also controls the low power state, driving strength, pull-up/down and event
+detection of each pin.  Below is a diagram of internal connections between
+the MFP logic and the remaining SoC peripherals::
+
+ +--------+
+ |        |--(GPIO19)--+
+ |  GPIO  |            |
+ |        |--(GPIO...) |
+ +--------+            |
+                       |       +---------+
+ +--------+            +------>|         |
+ |  PWM2  |--(PWM_OUT)-------->|   MFP   |
+ +--------+            +------>|         |-------> to external PAD
+                       | +---->|         |
+ +--------+            | | +-->|         |
+ |  SSP2  |---(TXD)----+ | |   +---------+
+ +--------+              | |
+                         | |
+ +--------+              | |
+ | Keypad |--(MKOUT4)----+ |
+ +--------+                |
+                           |
+ +--------+                |
+ |  UART2 |---(TXD)--------+
+ +--------+
+
+NOTE: the external pad is named as MFP_PIN_GPIO19, it doesn't necessarily
+mean it's dedicated for GPIO19, only as a hint that internally this pin
+can be routed from GPIO19 of the GPIO controller.
+
+To better understand the change from PXA25x/PXA27x GPIO alternate function
+to this new MFP mechanism, here are several key points:
+
+  1. GPIO controller on PXA3xx is now a dedicated controller, same as other
+     internal controllers like PWM, SSP and UART, with 128 internal signals
+     which can be routed to external through one or more MFPs (e.g. GPIO<0>
+     can be routed through either MFP_PIN_GPIO0 as well as MFP_PIN_GPIO0_2,
+     see arch/arm/mach-pxa/mfp-pxa300.h)
+
+  2. Alternate function configuration is removed from this GPIO controller,
+     the remaining functions are pure GPIO-specific, i.e.
+
+       - GPIO signal level control
+       - GPIO direction control
+       - GPIO level change detection
+
+  3. Low power state for each pin is now controlled by MFP, this means the
+     PGSRx registers on PXA2xx are now useless on PXA3xx
+
+  4. Wakeup detection is now controlled by MFP, PWER does not control the
+     wakeup from GPIO(s) any more, depending on the sleeping state, ADxER
+     (as defined in pxa3xx-regs.h) controls the wakeup from MFP
+
+NOTE: with such a clear separation of MFP and GPIO, by GPIO<xx> we normally
+mean it is a GPIO signal, and by MFP<xxx> or pin xxx, we mean a physical
+pad (or ball).
+
+MFP API Usage
+=============
+
+For board code writers, here are some guidelines:
+
+1. include ONE of the following header files in your <board>.c:
+
+   - #include "mfp-pxa25x.h"
+   - #include "mfp-pxa27x.h"
+   - #include "mfp-pxa300.h"
+   - #include "mfp-pxa320.h"
+   - #include "mfp-pxa930.h"
+
+   NOTE: only one file in your <board>.c, depending on the processors used,
+   because pin configuration definitions may conflict in these file (i.e.
+   same name, different meaning and settings on different processors). E.g.
+   for zylonite platform, which support both PXA300/PXA310 and PXA320, two
+   separate files are introduced: zylonite_pxa300.c and zylonite_pxa320.c
+   (in addition to handle MFP configuration differences, they also handle
+   the other differences between the two combinations).
+
+   NOTE: PXA300 and PXA310 are almost identical in pin configurations (with
+   PXA310 supporting some additional ones), thus the difference is actually
+   covered in a single mfp-pxa300.h.
+
+2. prepare an array for the initial pin configurations, e.g.::
+
+     static unsigned long mainstone_pin_config[] __initdata = {
+	/* Chip Select */
+	GPIO15_nCS_1,
+
+	/* LCD - 16bpp Active TFT */
+	GPIOxx_TFT_LCD_16BPP,
+	GPIO16_PWM0_OUT,	/* Backlight */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	...
+
+	/* GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+     };
+
+   a) once the pin configurations are passed to pxa{2xx,3xx}_mfp_config(),
+   and written to the actual registers, they are useless and may discard,
+   adding '__initdata' will help save some additional bytes here.
+
+   b) when there is only one possible pin configurations for a component,
+   some simplified definitions can be used, e.g. GPIOxx_TFT_LCD_16BPP on
+   PXA25x and PXA27x processors
+
+   c) if by board design, a pin can be configured to wake up the system
+   from low power state, it can be 'OR'ed with any of:
+
+      WAKEUP_ON_EDGE_BOTH
+      WAKEUP_ON_EDGE_RISE
+      WAKEUP_ON_EDGE_FALL
+      WAKEUP_ON_LEVEL_HIGH - specifically for enabling of keypad GPIOs,
+
+   to indicate that this pin has the capability of wake-up the system,
+   and on which edge(s). This, however, doesn't necessarily mean the
+   pin _will_ wakeup the system, it will only when set_irq_wake() is
+   invoked with the corresponding GPIO IRQ (GPIO_IRQ(xx) or gpio_to_irq())
+   and eventually calls gpio_set_wake() for the actual register setting.
+
+   d) although PXA3xx MFP supports edge detection on each pin, the
+   internal logic will only wakeup the system when those specific bits
+   in ADxER registers are set, which can be well mapped to the
+   corresponding peripheral, thus set_irq_wake() can be called with
+   the peripheral IRQ to enable the wakeup.
+
+
+MFP on PXA3xx
+=============
+
+Every external I/O pad on PXA3xx (excluding those for special purpose) has
+one MFP logic associated, and is controlled by one MFP register (MFPR).
+
+The MFPR has the following bit definitions (for PXA300/PXA310/PXA320)::
+
+ 31                        16 15 14 13 12 11 10  9  8  7  6  5  4  3  2  1  0
+  +-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+  |         RESERVED        |PS|PU|PD|  DRIVE |SS|SD|SO|EC|EF|ER|--| AF_SEL |
+  +-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+
+  Bit 3:   RESERVED
+  Bit 4:   EDGE_RISE_EN - enable detection of rising edge on this pin
+  Bit 5:   EDGE_FALL_EN - enable detection of falling edge on this pin
+  Bit 6:   EDGE_CLEAR   - disable edge detection on this pin
+  Bit 7:   SLEEP_OE_N   - enable outputs during low power modes
+  Bit 8:   SLEEP_DATA   - output data on the pin during low power modes
+  Bit 9:   SLEEP_SEL    - selection control for low power modes signals
+  Bit 13:  PULLDOWN_EN  - enable the internal pull-down resistor on this pin
+  Bit 14:  PULLUP_EN    - enable the internal pull-up resistor on this pin
+  Bit 15:  PULL_SEL     - pull state controlled by selected alternate function
+                          (0) or by PULL{UP,DOWN}_EN bits (1)
+
+  Bit 0 - 2: AF_SEL - alternate function selection, 8 possibilities, from 0-7
+  Bit 10-12: DRIVE  - drive strength and slew rate
+			0b000 - fast 1mA
+			0b001 - fast 2mA
+			0b002 - fast 3mA
+			0b003 - fast 4mA
+			0b004 - slow 6mA
+			0b005 - fast 6mA
+			0b006 - slow 10mA
+			0b007 - fast 10mA
+
+MFP Design for PXA2xx/PXA3xx
+============================
+
+Due to the difference of pin-mux handling between PXA2xx and PXA3xx, a unified
+MFP API is introduced to cover both series of processors.
+
+The basic idea of this design is to introduce definitions for all possible pin
+configurations, these definitions are processor and platform independent, and
+the actual API invoked to convert these definitions into register settings and
+make them effective there-after.
+
+Files Involved
+--------------
+
+  - arch/arm/mach-pxa/include/mach/mfp.h
+
+  for
+    1. Unified pin definitions - enum constants for all configurable pins
+    2. processor-neutral bit definitions for a possible MFP configuration
+
+  - arch/arm/mach-pxa/mfp-pxa3xx.h
+
+  for PXA3xx specific MFPR register bit definitions and PXA3xx common pin
+  configurations
+
+  - arch/arm/mach-pxa/mfp-pxa2xx.h
+
+  for PXA2xx specific definitions and PXA25x/PXA27x common pin configurations
+
+  - arch/arm/mach-pxa/mfp-pxa25x.h
+    arch/arm/mach-pxa/mfp-pxa27x.h
+    arch/arm/mach-pxa/mfp-pxa300.h
+    arch/arm/mach-pxa/mfp-pxa320.h
+    arch/arm/mach-pxa/mfp-pxa930.h
+
+  for processor specific definitions
+
+  - arch/arm/mach-pxa/mfp-pxa3xx.c
+  - arch/arm/mach-pxa/mfp-pxa2xx.c
+
+  for implementation of the pin configuration to take effect for the actual
+  processor.
+
+Pin Configuration
+-----------------
+
+  The following comments are copied from mfp.h (see the actual source code
+  for most updated info)::
+
+    /*
+     * a possible MFP configuration is represented by a 32-bit integer
+     *
+     * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
+     * bit 10..12 - Alternate Function Selection
+     * bit 13..15 - Drive Strength
+     * bit 16..18 - Low Power Mode State
+     * bit 19..20 - Low Power Mode Edge Detection
+     * bit 21..22 - Run Mode Pull State
+     *
+     * to facilitate the definition, the following macros are provided
+     *
+     * MFP_CFG_DEFAULT - default MFP configuration value, with
+     * 		  alternate function = 0,
+     * 		  drive strength = fast 3mA (MFP_DS03X)
+     * 		  low power mode = default
+     * 		  edge detection = none
+     *
+     * MFP_CFG	- default MFPR value with alternate function
+     * MFP_CFG_DRV	- default MFPR value with alternate function and
+     * 		  pin drive strength
+     * MFP_CFG_LPM	- default MFPR value with alternate function and
+     * 		  low power mode
+     * MFP_CFG_X	- default MFPR value with alternate function,
+     * 		  pin drive strength and low power mode
+     */
+
+   Examples of pin configurations are::
+
+     #define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
+
+   which reads GPIO94 can be configured as SSP3_RXD, with alternate function
+   selection of 1, driving strength of 0b101, and a float state in low power
+   modes.
+
+   NOTE: this is the default setting of this pin being configured as SSP3_RXD
+   which can be modified a bit in board code, though it is not recommended to
+   do so, simply because this default setting is usually carefully encoded,
+   and is supposed to work in most cases.
+
+Register Settings
+-----------------
+
+   Register settings on PXA3xx for a pin configuration is actually very
+   straight-forward, most bits can be converted directly into MFPR value
+   in a easier way. Two sets of MFPR values are calculated: the run-time
+   ones and the low power mode ones, to allow different settings.
+
+   The conversion from a generic pin configuration to the actual register
+   settings on PXA2xx is a bit complicated: many registers are involved,
+   including GAFRx, GPDRx, PGSRx, PWER, PKWR, PFER and PRER. Please see
+   mfp-pxa2xx.c for how the conversion is made.
diff --git a/Documentation/arch/arm/sa1100/assabet.rst b/Documentation/arch/arm/sa1100/assabet.rst
new file mode 100644
index 0000000000000..a761e128fb086
--- /dev/null
+++ b/Documentation/arch/arm/sa1100/assabet.rst
@@ -0,0 +1,301 @@
+============================================
+The Intel Assabet (SA-1110 evaluation) board
+============================================
+
+Please see:
+http://developer.intel.com
+
+Also some notes from John G Dorsey <jd5q@andrew.cmu.edu>:
+http://www.cs.cmu.edu/~wearable/software/assabet.html
+
+
+Building the kernel
+-------------------
+
+To build the kernel with current defaults::
+
+	make assabet_defconfig
+	make oldconfig
+	make zImage
+
+The resulting kernel image should be available in linux/arch/arm/boot/zImage.
+
+
+Installing a bootloader
+-----------------------
+
+A couple of bootloaders able to boot Linux on Assabet are available:
+
+BLOB (http://www.lartmaker.nl/lartware/blob/)
+
+   BLOB is a bootloader used within the LART project.  Some contributed
+   patches were merged into BLOB to add support for Assabet.
+
+Compaq's Bootldr + John Dorsey's patch for Assabet support
+(http://www.handhelds.org/Compaq/bootldr.html)
+(http://www.wearablegroup.org/software/bootldr/)
+
+   Bootldr is the bootloader developed by Compaq for the iPAQ Pocket PC.
+   John Dorsey has produced add-on patches to add support for Assabet and
+   the JFFS filesystem.
+
+RedBoot (http://sources.redhat.com/redboot/)
+
+   RedBoot is a bootloader developed by Red Hat based on the eCos RTOS
+   hardware abstraction layer.  It supports Assabet amongst many other
+   hardware platforms.
+
+RedBoot is currently the recommended choice since it's the only one to have
+networking support, and is the most actively maintained.
+
+Brief examples on how to boot Linux with RedBoot are shown below.  But first
+you need to have RedBoot installed in your flash memory.  A known to work
+precompiled RedBoot binary is available from the following location:
+
+- ftp://ftp.netwinder.org/users/n/nico/
+- ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/nico/
+- ftp://ftp.handhelds.org/pub/linux/arm/sa-1100-patches/
+
+Look for redboot-assabet*.tgz.  Some installation infos are provided in
+redboot-assabet*.txt.
+
+
+Initial RedBoot configuration
+-----------------------------
+
+The commands used here are explained in The RedBoot User's Guide available
+on-line at http://sources.redhat.com/ecos/docs.html.
+Please refer to it for explanations.
+
+If you have a CF network card (my Assabet kit contained a CF+ LP-E from
+Socket Communications Inc.), you should strongly consider using it for TFTP
+file transfers.  You must insert it before RedBoot runs since it can't detect
+it dynamically.
+
+To initialize the flash directory::
+
+	fis init -f
+
+To initialize the non-volatile settings, like whether you want to use BOOTP or
+a static IP address, etc, use this command::
+
+	fconfig -i
+
+
+Writing a kernel image into flash
+---------------------------------
+
+First, the kernel image must be loaded into RAM.  If you have the zImage file
+available on a TFTP server::
+
+	load zImage -r -b 0x100000
+
+If you rather want to use Y-Modem upload over the serial port::
+
+	load -m ymodem -r -b 0x100000
+
+To write it to flash::
+
+	fis create "Linux kernel" -b 0x100000 -l 0xc0000
+
+
+Booting the kernel
+------------------
+
+The kernel still requires a filesystem to boot.  A ramdisk image can be loaded
+as follows::
+
+	load ramdisk_image.gz -r -b 0x800000
+
+Again, Y-Modem upload can be used instead of TFTP by replacing the file name
+by '-y ymodem'.
+
+Now the kernel can be retrieved from flash like this::
+
+	fis load "Linux kernel"
+
+or loaded as described previously.  To boot the kernel::
+
+	exec -b 0x100000 -l 0xc0000
+
+The ramdisk image could be stored into flash as well, but there are better
+solutions for on-flash filesystems as mentioned below.
+
+
+Using JFFS2
+-----------
+
+Using JFFS2 (the Second Journalling Flash File System) is probably the most
+convenient way to store a writable filesystem into flash.  JFFS2 is used in
+conjunction with the MTD layer which is responsible for low-level flash
+management.  More information on the Linux MTD can be found on-line at:
+http://www.linux-mtd.infradead.org/.  A JFFS howto with some infos about
+creating JFFS/JFFS2 images is available from the same site.
+
+For instance, a sample JFFS2 image can be retrieved from the same FTP sites
+mentioned below for the precompiled RedBoot image.
+
+To load this file::
+
+	load sample_img.jffs2 -r -b 0x100000
+
+The result should look like::
+
+	RedBoot> load sample_img.jffs2 -r -b 0x100000
+	Raw file loaded 0x00100000-0x00377424
+
+Now we must know the size of the unallocated flash::
+
+	fis free
+
+Result::
+
+	RedBoot> fis free
+	  0x500E0000 .. 0x503C0000
+
+The values above may be different depending on the size of the filesystem and
+the type of flash.  See their usage below as an example and take care of
+substituting yours appropriately.
+
+We must determine some values::
+
+	size of unallocated flash:	0x503c0000 - 0x500e0000 = 0x2e0000
+	size of the filesystem image:	0x00377424 - 0x00100000 = 0x277424
+
+We want to fit the filesystem image of course, but we also want to give it all
+the remaining flash space as well.  To write it::
+
+	fis unlock -f 0x500E0000 -l 0x2e0000
+	fis erase -f 0x500E0000 -l 0x2e0000
+	fis write -b 0x100000 -l 0x277424 -f 0x500E0000
+	fis create "JFFS2" -n -f 0x500E0000 -l 0x2e0000
+
+Now the filesystem is associated to a MTD "partition" once Linux has discovered
+what they are in the boot process.  From Redboot, the 'fis list' command
+displays them::
+
+	RedBoot> fis list
+	Name              FLASH addr  Mem addr    Length      Entry point
+	RedBoot           0x50000000  0x50000000  0x00020000  0x00000000
+	RedBoot config    0x503C0000  0x503C0000  0x00020000  0x00000000
+	FIS directory     0x503E0000  0x503E0000  0x00020000  0x00000000
+	Linux kernel      0x50020000  0x00100000  0x000C0000  0x00000000
+	JFFS2             0x500E0000  0x500E0000  0x002E0000  0x00000000
+
+However Linux should display something like::
+
+	SA1100 flash: probing 32-bit flash bus
+	SA1100 flash: Found 2 x16 devices at 0x0 in 32-bit mode
+	Using RedBoot partition definition
+	Creating 5 MTD partitions on "SA1100 flash":
+	0x00000000-0x00020000 : "RedBoot"
+	0x00020000-0x000e0000 : "Linux kernel"
+	0x000e0000-0x003c0000 : "JFFS2"
+	0x003c0000-0x003e0000 : "RedBoot config"
+	0x003e0000-0x00400000 : "FIS directory"
+
+What's important here is the position of the partition we are interested in,
+which is the third one.  Within Linux, this correspond to /dev/mtdblock2.
+Therefore to boot Linux with the kernel and its root filesystem in flash, we
+need this RedBoot command::
+
+	fis load "Linux kernel"
+	exec -b 0x100000 -l 0xc0000 -c "root=/dev/mtdblock2"
+
+Of course other filesystems than JFFS might be used, like cramfs for example.
+You might want to boot with a root filesystem over NFS, etc.  It is also
+possible, and sometimes more convenient, to flash a filesystem directly from
+within Linux while booted from a ramdisk or NFS.  The Linux MTD repository has
+many tools to deal with flash memory as well, to erase it for example.  JFFS2
+can then be mounted directly on a freshly erased partition and files can be
+copied over directly.  Etc...
+
+
+RedBoot scripting
+-----------------
+
+All the commands above aren't so useful if they have to be typed in every
+time the Assabet is rebooted.  Therefore it's possible to automate the boot
+process using RedBoot's scripting capability.
+
+For example, I use this to boot Linux with both the kernel and the ramdisk
+images retrieved from a TFTP server on the network::
+
+	RedBoot> fconfig
+	Run script at boot: false true
+	Boot script:
+	Enter script, terminate with empty line
+	>> load zImage -r -b 0x100000
+	>> load ramdisk_ks.gz -r -b 0x800000
+	>> exec -b 0x100000 -l 0xc0000
+	>>
+	Boot script timeout (1000ms resolution): 3
+	Use BOOTP for network configuration: true
+	GDB connection port: 9000
+	Network debug at boot time: false
+	Update RedBoot non-volatile configuration - are you sure (y/n)? y
+
+Then, rebooting the Assabet is just a matter of waiting for the login prompt.
+
+
+
+Nicolas Pitre
+nico@fluxnic.net
+
+June 12, 2001
+
+
+Status of peripherals in -rmk tree (updated 14/10/2001)
+-------------------------------------------------------
+
+Assabet:
+ Serial ports:
+  Radio:		TX, RX, CTS, DSR, DCD, RI
+   - PM:		Not tested.
+   - COM:		TX, RX, CTS, DSR, DCD, RTS, DTR, PM
+   - PM:		Not tested.
+   - I2C:		Implemented, not fully tested.
+   - L3:		Fully tested, pass.
+   - PM:		Not tested.
+
+ Video:
+  - LCD:		Fully tested.  PM
+
+   (LCD doesn't like being blanked with neponset connected)
+
+  - Video out:		Not fully
+
+ Audio:
+  UDA1341:
+  -  Playback:		Fully tested, pass.
+  -  Record:		Implemented, not tested.
+  -  PM:			Not tested.
+
+  UCB1200:
+  -  Audio play:	Implemented, not heavily tested.
+  -  Audio rec:		Implemented, not heavily tested.
+  -  Telco audio play:	Implemented, not heavily tested.
+  -  Telco audio rec:	Implemented, not heavily tested.
+  -  POTS control:	No
+  -  Touchscreen:	Yes
+  -  PM:		Not tested.
+
+ Other:
+  - PCMCIA:
+  - LPE:		Fully tested, pass.
+  - USB:		No
+  - IRDA:
+  - SIR:		Fully tested, pass.
+  - FIR:		Fully tested, pass.
+  - PM:			Not tested.
+
+Neponset:
+ Serial ports:
+  - COM1,2:		TX, RX, CTS, DSR, DCD, RTS, DTR
+  - PM:			Not tested.
+  - USB:		Implemented, not heavily tested.
+  - PCMCIA:		Implemented, not heavily tested.
+  - CF:			Implemented, not heavily tested.
+  - PM:			Not tested.
+
+More stuff can be found in the -np (Nicolas Pitre's) tree.
diff --git a/Documentation/arch/arm/sa1100/cerf.rst b/Documentation/arch/arm/sa1100/cerf.rst
new file mode 100644
index 0000000000000..7fa71b609bf9a
--- /dev/null
+++ b/Documentation/arch/arm/sa1100/cerf.rst
@@ -0,0 +1,35 @@
+==============
+CerfBoard/Cube
+==============
+
+*** The StrongARM version of the CerfBoard/Cube has been discontinued ***
+
+The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board
+that measures approximately 2" square. It includes an Ethernet
+controller, an RS232-compatible serial port, a USB function port, and
+one CompactFlash+ slot on the back. Pictures can be found at the
+Intrinsyc website, http://www.intrinsyc.com.
+
+This document describes the support in the Linux kernel for the
+Intrinsyc CerfBoard.
+
+Supported in this version
+=========================
+
+   - CompactFlash+ slot (select PCMCIA in General Setup and any options
+     that may be required)
+   - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in
+     Network Devices)
+   - Serial ports with a serial console (hardcoded to 38400 8N1)
+
+In order to get this kernel onto your Cerf, you need a server that runs
+both BOOTP and TFTP. Detailed instructions should have come with your
+evaluation kit on how to use the bootloader. This series of commands
+will suffice::
+
+   make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig
+   make ARCH=arm CROSS_COMPILE=arm-linux- zImage
+   make ARCH=arm CROSS_COMPILE=arm-linux- modules
+   cp arch/arm/boot/zImage <TFTP directory>
+
+support@intrinsyc.com
diff --git a/Documentation/arch/arm/sa1100/index.rst b/Documentation/arch/arm/sa1100/index.rst
new file mode 100644
index 0000000000000..c9aed43280fff
--- /dev/null
+++ b/Documentation/arch/arm/sa1100/index.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+Intel StrongARM 1100
+====================
+
+.. toctree::
+    :maxdepth: 1
+
+    assabet
+    cerf
+    lart
+    serial_uart
diff --git a/Documentation/arch/arm/sa1100/lart.rst b/Documentation/arch/arm/sa1100/lart.rst
new file mode 100644
index 0000000000000..94c0568d10953
--- /dev/null
+++ b/Documentation/arch/arm/sa1100/lart.rst
@@ -0,0 +1,15 @@
+====================================
+Linux Advanced Radio Terminal (LART)
+====================================
+
+The LART is a small (7.5 x 10cm) SA-1100 board, designed for embedded
+applications. It has 32 MB DRAM, 4MB Flash ROM, double RS232 and all
+other StrongARM-gadgets. Almost all SA signals are directly accessible
+through a number of connectors. The powersupply accepts voltages
+between 3.5V and 16V and is overdimensioned to support a range of
+daughterboards. A quad Ethernet / IDE / PS2 / sound daughterboard
+is under development, with plenty of others in different stages of
+planning.
+
+The hardware designs for this board have been released under an open license;
+see the LART page at http://www.lartmaker.nl/ for more information.
diff --git a/Documentation/arch/arm/sa1100/serial_uart.rst b/Documentation/arch/arm/sa1100/serial_uart.rst
new file mode 100644
index 0000000000000..ea983642b9be5
--- /dev/null
+++ b/Documentation/arch/arm/sa1100/serial_uart.rst
@@ -0,0 +1,51 @@
+==================
+SA1100 serial port
+==================
+
+The SA1100 serial port had its major/minor numbers officially assigned::
+
+  > Date: Sun, 24 Sep 2000 21:40:27 -0700
+  > From: H. Peter Anvin <hpa@transmeta.com>
+  > To: Nicolas Pitre <nico@CAM.ORG>
+  > Cc: Device List Maintainer <device@lanana.org>
+  > Subject: Re: device
+  >
+  > Okay.  Note that device numbers 204 and 205 are used for "low density
+  > serial devices", so you will have a range of minors on those majors (the
+  > tty device layer handles this just fine, so you don't have to worry about
+  > doing anything special.)
+  >
+  > So your assignments are:
+  >
+  > 204 char        Low-density serial ports
+  >                   5 = /dev/ttySA0               SA1100 builtin serial port 0
+  >                   6 = /dev/ttySA1               SA1100 builtin serial port 1
+  >                   7 = /dev/ttySA2               SA1100 builtin serial port 2
+  >
+  > 205 char        Low-density serial ports (alternate device)
+  >                   5 = /dev/cusa0                Callout device for ttySA0
+  >                   6 = /dev/cusa1                Callout device for ttySA1
+  >                   7 = /dev/cusa2                Callout device for ttySA2
+  >
+
+You must create those inodes in /dev on the root filesystem used
+by your SA1100-based device::
+
+	mknod ttySA0 c 204 5
+	mknod ttySA1 c 204 6
+	mknod ttySA2 c 204 7
+	mknod cusa0 c 205 5
+	mknod cusa1 c 205 6
+	mknod cusa2 c 205 7
+
+In addition to the creation of the appropriate device nodes above, you
+must ensure your user space applications make use of the correct device
+name. The classic example is the content of the /etc/inittab file where
+you might have a getty process started on ttyS0.
+
+In this case:
+
+- replace occurrences of ttyS0 with ttySA0, ttyS1 with ttySA1, etc.
+
+- don't forget to add 'ttySA0', 'console', or the appropriate tty name
+  in /etc/securetty for root to be allowed to login as well.
diff --git a/Documentation/arch/arm/samsung/bootloader-interface.rst b/Documentation/arch/arm/samsung/bootloader-interface.rst
new file mode 100644
index 0000000000000..a56f325dae780
--- /dev/null
+++ b/Documentation/arch/arm/samsung/bootloader-interface.rst
@@ -0,0 +1,81 @@
+==========================================================
+Interface between kernel and boot loaders on Exynos boards
+==========================================================
+
+Author: Krzysztof Kozlowski
+
+Date  : 6 June 2015
+
+The document tries to describe currently used interface between Linux kernel
+and boot loaders on Samsung Exynos based boards. This is not a definition
+of interface but rather a description of existing state, a reference
+for information purpose only.
+
+In the document "boot loader" means any of following: U-boot, proprietary
+SBOOT or any other firmware for ARMv7 and ARMv8 initializing the board before
+executing kernel.
+
+
+1. Non-Secure mode
+
+Address:      sysram_ns_base_addr
+
+============= ============================================ ==================
+Offset        Value                                        Purpose
+============= ============================================ ==================
+0x08          exynos_cpu_resume_ns, mcpm_entry_point       System suspend
+0x0c          0x00000bad (Magic cookie)                    System suspend
+0x1c          exynos4_secondary_startup                    Secondary CPU boot
+0x1c + 4*cpu  exynos4_secondary_startup (Exynos4412)       Secondary CPU boot
+0x20          0xfcba0d10 (Magic cookie)                    AFTR
+0x24          exynos_cpu_resume_ns                         AFTR
+0x28 + 4*cpu  0x8 (Magic cookie, Exynos3250)               AFTR
+0x28          0x0 or last value during resume (Exynos542x) System suspend
+============= ============================================ ==================
+
+
+2. Secure mode
+
+Address:      sysram_base_addr
+
+============= ============================================ ==================
+Offset        Value                                        Purpose
+============= ============================================ ==================
+0x00          exynos4_secondary_startup                    Secondary CPU boot
+0x04          exynos4_secondary_startup (Exynos542x)       Secondary CPU boot
+4*cpu         exynos4_secondary_startup (Exynos4412)       Secondary CPU boot
+0x20          exynos_cpu_resume (Exynos4210 r1.0)          AFTR
+0x24          0xfcba0d10 (Magic cookie, Exynos4210 r1.0)   AFTR
+============= ============================================ ==================
+
+Address:      pmu_base_addr
+
+============= ============================================ ==================
+Offset        Value                                        Purpose
+============= ============================================ ==================
+0x0800        exynos_cpu_resume                            AFTR, suspend
+0x0800        mcpm_entry_point (Exynos542x with MCPM)      AFTR, suspend
+0x0804        0xfcba0d10 (Magic cookie)                    AFTR
+0x0804        0x00000bad (Magic cookie)                    System suspend
+0x0814        exynos4_secondary_startup (Exynos4210 r1.1)  Secondary CPU boot
+0x0818        0xfcba0d10 (Magic cookie, Exynos4210 r1.1)   AFTR
+0x081C        exynos_cpu_resume (Exynos4210 r1.1)          AFTR
+============= ============================================ ==================
+
+3. Other (regardless of secure/non-secure mode)
+
+Address:      pmu_base_addr
+
+============= =============================== ===============================
+Offset        Value                           Purpose
+============= =============================== ===============================
+0x0908        Non-zero                        Secondary CPU boot up indicator
+                                              on Exynos3250 and Exynos542x
+============= =============================== ===============================
+
+
+4. Glossary
+
+AFTR - ARM Off Top Running, a low power mode, Cortex cores and many other
+modules are power gated, except the TOP modules
+MCPM - Multi-Cluster Power Management
diff --git a/Documentation/arch/arm/samsung/clksrc-change-registers.awk b/Documentation/arch/arm/samsung/clksrc-change-registers.awk
new file mode 100755
index 0000000000000..7be1b8aa7cd9a
--- /dev/null
+++ b/Documentation/arch/arm/samsung/clksrc-change-registers.awk
@@ -0,0 +1,166 @@
+#!/usr/bin/awk -f
+#
+# Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+#
+# Released under GPLv2
+
+# example usage
+# ./clksrc-change-registers.awk arch/arm/plat-s5pc1xx/include/plat/regs-clock.h < src > dst
+
+function extract_value(s)
+{
+    eqat = index(s, "=")
+    comat = index(s, ",")
+    return substr(s, eqat+2, (comat-eqat)-2)
+}
+
+function remove_brackets(b)
+{
+    return substr(b, 2, length(b)-2)
+}
+
+function splitdefine(l, p)
+{
+    r = split(l, tp)
+
+    p[0] = tp[2]
+    p[1] = remove_brackets(tp[3])
+}
+
+function find_length(f)
+{
+    if (0)
+	printf "find_length " f "\n" > "/dev/stderr"
+
+    if (f ~ /0x1/)
+	return 1
+    else if (f ~ /0x3/)
+	return 2
+    else if (f ~ /0x7/)
+	return 3
+    else if (f ~ /0xf/)
+	return 4
+
+    printf "unknown length " f "\n" > "/dev/stderr"
+    exit
+}
+
+function find_shift(s)
+{
+    id = index(s, "<")
+    if (id <= 0) {
+	printf "cannot find shift " s "\n" > "/dev/stderr"
+	exit
+    }
+
+    return substr(s, id+2)
+}
+
+
+BEGIN {
+    if (ARGC < 2) {
+	print "too few arguments" > "/dev/stderr"
+	exit
+    }
+
+# read the header file and find the mask values that we will need
+# to replace and create an associative array of values
+
+    while (getline line < ARGV[1] > 0) {
+	if (line ~ /\#define.*_MASK/ &&
+	    !(line ~ /USB_SIG_MASK/)) {
+	    splitdefine(line, fields)
+	    name = fields[0]
+	    if (0)
+		printf "MASK " line "\n" > "/dev/stderr"
+	    dmask[name,0] = find_length(fields[1])
+	    dmask[name,1] = find_shift(fields[1])
+	    if (0)
+		printf "=> '" name "' LENGTH=" dmask[name,0] " SHIFT=" dmask[name,1] "\n" > "/dev/stderr"
+	} else {
+	}
+    }
+
+    delete ARGV[1]
+}
+
+/clksrc_clk.*=.*{/ {
+    shift=""
+    mask=""
+    divshift=""
+    reg_div=""
+    reg_src=""
+    indent=1
+
+    print $0
+
+    for(; indent >= 1;) {
+	if ((getline line) <= 0) {
+	    printf "unexpected end of file" > "/dev/stderr"
+	    exit 1;
+	}
+
+	if (line ~ /\.shift/) {
+	    shift = extract_value(line)
+	} else if (line ~ /\.mask/) {
+	    mask = extract_value(line)
+	} else if (line ~ /\.reg_divider/) {
+	    reg_div = extract_value(line)
+	} else if (line ~ /\.reg_source/) {
+	    reg_src = extract_value(line)
+	} else if (line ~ /\.divider_shift/) {
+	    divshift = extract_value(line)
+	} else if (line ~ /{/) {
+		indent++
+		print line
+	    } else if (line ~ /}/) {
+	    indent--
+
+	    if (indent == 0) {
+		if (0) {
+		    printf "shift '" shift   "' ='" dmask[shift,0] "'\n" > "/dev/stderr"
+		    printf "mask  '" mask    "'\n" > "/dev/stderr"
+		    printf "dshft '" divshift "'\n" > "/dev/stderr"
+		    printf "rdiv  '" reg_div "'\n" > "/dev/stderr"
+		    printf "rsrc  '" reg_src "'\n" > "/dev/stderr"
+		}
+
+		generated = mask
+		sub(reg_src, reg_div, generated)
+
+		if (0) {
+		    printf "/* rsrc " reg_src " */\n"
+		    printf "/* rdiv " reg_div " */\n"
+		    printf "/* shift " shift " */\n"
+		    printf "/* mask " mask " */\n"
+		    printf "/* generated " generated " */\n"
+		}
+
+		if (reg_div != "") {
+		    printf "\t.reg_div = { "
+		    printf ".reg = " reg_div ", "
+		    printf ".shift = " dmask[generated,1] ", "
+		    printf ".size = " dmask[generated,0] ", "
+		    printf "},\n"
+		}
+
+		printf "\t.reg_src = { "
+		printf ".reg = " reg_src ", "
+		printf ".shift = " dmask[mask,1] ", "
+		printf ".size = " dmask[mask,0] ", "
+
+		printf "},\n"
+
+	    }
+
+	    print line
+	} else {
+	    print line
+	}
+
+	if (0)
+	    printf indent ":" line "\n" > "/dev/stderr"
+    }
+}
+
+// && ! /clksrc_clk.*=.*{/ { print $0 }
diff --git a/Documentation/arch/arm/samsung/gpio.rst b/Documentation/arch/arm/samsung/gpio.rst
new file mode 100644
index 0000000000000..27fae0d503615
--- /dev/null
+++ b/Documentation/arch/arm/samsung/gpio.rst
@@ -0,0 +1,32 @@
+===========================
+Samsung GPIO implementation
+===========================
+
+Introduction
+------------
+
+This outlines the Samsung GPIO implementation and the architecture
+specific calls provided alongside the drivers/gpio core.
+
+
+GPIOLIB integration
+-------------------
+
+The gpio implementation uses gpiolib as much as possible, only providing
+specific calls for the items that require Samsung specific handling, such
+as pin special-function or pull resistor control.
+
+GPIO numbering is synchronised between the Samsung and gpiolib system.
+
+
+PIN configuration
+-----------------
+
+Pin configuration is specific to the Samsung architecture, with each SoC
+registering the necessary information for the core gpio configuration
+implementation to configure pins as necessary.
+
+The s3c_gpio_cfgpin() and s3c_gpio_setpull() provide the means for a
+driver or machine to change gpio configuration.
+
+See arch/arm/mach-s3c/gpio-cfg.h for more information on these functions.
diff --git a/Documentation/arch/arm/samsung/index.rst b/Documentation/arch/arm/samsung/index.rst
new file mode 100644
index 0000000000000..8142cce3d23ea
--- /dev/null
+++ b/Documentation/arch/arm/samsung/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========
+Samsung SoC
+===========
+
+.. toctree::
+   :maxdepth: 1
+
+   gpio
+   bootloader-interface
+   overview
diff --git a/Documentation/arch/arm/samsung/overview.rst b/Documentation/arch/arm/samsung/overview.rst
new file mode 100644
index 0000000000000..8b15a190169b0
--- /dev/null
+++ b/Documentation/arch/arm/samsung/overview.rst
@@ -0,0 +1,76 @@
+==========================
+Samsung ARM Linux Overview
+==========================
+
+Introduction
+------------
+
+  The Samsung range of ARM SoCs spans many similar devices, from the initial
+  ARM9 through to the newest ARM cores. This document shows an overview of
+  the current kernel support, how to use it and where to find the code
+  that supports this.
+
+  The currently supported SoCs are:
+
+  - S3C64XX: S3C6400 and S3C6410
+  - S5PC110 / S5PV210
+
+
+Configuration
+-------------
+
+  A number of configurations are supplied, as there is no current way of
+  unifying all the SoCs into one kernel.
+
+  s5pc110_defconfig
+	- S5PC110 specific default configuration
+  s5pv210_defconfig
+	- S5PV210 specific default configuration
+
+
+Layout
+------
+
+  The directory layout is currently being restructured, and consists of
+  several platform directories and then the machine specific directories
+  of the CPUs being built for.
+
+  plat-samsung provides the base for all the implementations, and is the
+  last in the line of include directories that are processed for the build
+  specific information. It contains the base clock, GPIO and device definitions
+  to get the system running.
+
+  plat-s5p is for s5p specific builds, and contains common support for the
+  S5P specific systems. Not all S5Ps use all the features in this directory
+  due to differences in the hardware.
+
+
+Layout changes
+--------------
+
+  The old plat-s3c and plat-s5pc1xx directories have been removed, with
+  support moved to either plat-samsung or plat-s5p as necessary. These moves
+  where to simplify the include and dependency issues involved with having
+  so many different platform directories.
+
+
+Port Contributors
+-----------------
+
+  Ben Dooks (BJD)
+  Vincent Sanders
+  Herbert Potzl
+  Arnaud Patard (RTP)
+  Roc Wu
+  Klaus Fetscher
+  Dimitry Andric
+  Shannon Holland
+  Guillaume Gourat (NexVision)
+  Christer Weinigel (wingel) (Acer N30)
+  Lucas Correia Villa Real (S3C2400 port)
+
+
+Document Author
+---------------
+
+Copyright 2009-2010 Ben Dooks <ben-linux@fluff.org>
diff --git a/Documentation/arch/arm/setup.rst b/Documentation/arch/arm/setup.rst
new file mode 100644
index 0000000000000..8e12ef3fb9a76
--- /dev/null
+++ b/Documentation/arch/arm/setup.rst
@@ -0,0 +1,108 @@
+=============================================
+Kernel initialisation parameters on ARM Linux
+=============================================
+
+The following document describes the kernel initialisation parameter
+structure, otherwise known as 'struct param_struct' which is used
+for most ARM Linux architectures.
+
+This structure is used to pass initialisation parameters from the
+kernel loader to the Linux kernel proper, and may be short lived
+through the kernel initialisation process.  As a general rule, it
+should not be referenced outside of arch/arm/kernel/setup.c:setup_arch().
+
+There are a lot of parameters listed in there, and they are described
+below:
+
+ page_size
+   This parameter must be set to the page size of the machine, and
+   will be checked by the kernel.
+
+ nr_pages
+   This is the total number of pages of memory in the system.  If
+   the memory is banked, then this should contain the total number
+   of pages in the system.
+
+   If the system contains separate VRAM, this value should not
+   include this information.
+
+ ramdisk_size
+   This is now obsolete, and should not be used.
+
+ flags
+   Various kernel flags, including:
+
+    =====   ========================
+    bit 0   1 = mount root read only
+    bit 1   unused
+    bit 2   0 = load ramdisk
+    bit 3   0 = prompt for ramdisk
+    =====   ========================
+
+ rootdev
+   major/minor number pair of device to mount as the root filesystem.
+
+ video_num_cols / video_num_rows
+   These two together describe the character size of the dummy console,
+   or VGA console character size.  They should not be used for any other
+   purpose.
+
+   It's generally a good idea to set these to be either standard VGA, or
+   the equivalent character size of your fbcon display.  This then allows
+   all the bootup messages to be displayed correctly.
+
+ video_x / video_y
+   This describes the character position of cursor on VGA console, and
+   is otherwise unused. (should not be used for other console types, and
+   should not be used for other purposes).
+
+ memc_control_reg
+   MEMC chip control register for Acorn Archimedes and Acorn A5000
+   based machines.  May be used differently by different architectures.
+
+ sounddefault
+   Default sound setting on Acorn machines.  May be used differently by
+   different architectures.
+
+ adfsdrives
+   Number of ADFS/MFM disks.  May be used differently by different
+   architectures.
+
+ bytes_per_char_h / bytes_per_char_v
+   These are now obsolete, and should not be used.
+
+ pages_in_bank[4]
+   Number of pages in each bank of the systems memory (used for RiscPC).
+   This is intended to be used on systems where the physical memory
+   is non-contiguous from the processors point of view.
+
+ pages_in_vram
+   Number of pages in VRAM (used on Acorn RiscPC).  This value may also
+   be used by loaders if the size of the video RAM can't be obtained
+   from the hardware.
+
+ initrd_start / initrd_size
+   This describes the kernel virtual start address and size of the
+   initial ramdisk.
+
+ rd_start
+   Start address in sectors of the ramdisk image on a floppy disk.
+
+ system_rev
+   system revision number.
+
+ system_serial_low / system_serial_high
+   system 64-bit serial number
+
+ mem_fclk_21285
+   The speed of the external oscillator to the 21285 (footbridge),
+   which control's the speed of the memory bus, timer & serial port.
+   Depending upon the speed of the cpu its value can be between
+   0-66 MHz. If no params are passed or a value of zero is passed,
+   then a value of 50 Mhz is the default on 21285 architectures.
+
+ paths[8][128]
+   These are now obsolete, and should not be used.
+
+ commandline
+   Kernel command line parameters.  Details can be found elsewhere.
diff --git a/Documentation/arch/arm/spear/overview.rst b/Documentation/arch/arm/spear/overview.rst
new file mode 100644
index 0000000000000..1a77f6b213b64
--- /dev/null
+++ b/Documentation/arch/arm/spear/overview.rst
@@ -0,0 +1,66 @@
+========================
+SPEAr ARM Linux Overview
+========================
+
+Introduction
+------------
+
+  SPEAr (Structured Processor Enhanced Architecture).
+  weblink : http://www.st.com/spear
+
+  The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
+  supported by the 'spear' platform of ARM Linux. Currently SPEAr1310,
+  SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported.
+
+  Hierarchy in SPEAr is as follows:
+
+  SPEAr (Platform)
+
+	- SPEAr3XX (3XX SOC series, based on ARM9)
+		- SPEAr300 (SOC)
+			- SPEAr300 Evaluation Board
+		- SPEAr310 (SOC)
+			- SPEAr310 Evaluation Board
+		- SPEAr320 (SOC)
+			- SPEAr320 Evaluation Board
+	- SPEAr6XX (6XX SOC series, based on ARM9)
+		- SPEAr600 (SOC)
+			- SPEAr600 Evaluation Board
+	- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
+		- SPEAr1310 (SOC)
+			- SPEAr1310 Evaluation Board
+		- SPEAr1340 (SOC)
+			- SPEAr1340 Evaluation Board
+
+Configuration
+-------------
+
+  A generic configuration is provided for each machine, and can be used as the
+  default by::
+
+	make spear13xx_defconfig
+	make spear3xx_defconfig
+	make spear6xx_defconfig
+
+Layout
+------
+
+  The common files for multiple machine families (SPEAr3xx, SPEAr6xx and
+  SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear
+  with headers in plat/.
+
+  Each machine series have a directory with name arch/arm/mach-spear followed by
+  series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
+
+  Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for
+  spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is
+  mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific
+  files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and
+  spear600.c.  mach-spear* doesn't contains board specific files as they fully
+  support Flattened Device Tree.
+
+
+Document Author
+---------------
+
+  Viresh Kumar <vireshk@kernel.org>, (c) 2010-2012 ST Microelectronics
diff --git a/Documentation/arch/arm/sti/overview.rst b/Documentation/arch/arm/sti/overview.rst
new file mode 100644
index 0000000000000..ae16aced800f4
--- /dev/null
+++ b/Documentation/arch/arm/sti/overview.rst
@@ -0,0 +1,32 @@
+======================
+STi ARM Linux Overview
+======================
+
+Introduction
+------------
+
+  The ST Microelectronics Multimedia and Application Processors range of
+  CortexA9 System-on-Chip are supported by the 'STi' platform of
+  ARM Linux. Currently STiH407, STiH410 and STiH418 are supported.
+
+
+configuration
+-------------
+
+  The configuration for the STi platform is supported via the multi_v7_defconfig.
+
+Layout
+------
+
+  All the files for multiple machine families (STiH407, STiH410, and STiH418)
+  are located in the platform code contained in arch/arm/mach-sti
+
+  There is a generic board board-dt.c in the mach folder which support
+  Flattened Device Tree, which means, It works with any compatible board with
+  Device Trees.
+
+
+Document Author
+---------------
+
+  Srinivas Kandagatla <srinivas.kandagatla@st.com>, (c) 2013 ST Microelectronics
diff --git a/Documentation/arch/arm/sti/stih407-overview.rst b/Documentation/arch/arm/sti/stih407-overview.rst
new file mode 100644
index 0000000000000..027e75bc7b7c4
--- /dev/null
+++ b/Documentation/arch/arm/sti/stih407-overview.rst
@@ -0,0 +1,19 @@
+================
+STiH407 Overview
+================
+
+Introduction
+------------
+
+    The STiH407 is the new generation of SoC for Multi-HD, AVC set-top boxes
+    and server/connected client application for satellite, cable, terrestrial
+    and IP-STB markets.
+
+    Features
+    - ARM Cortex-A9 1.5 GHz dual core CPU (28nm)
+    - SATA2, USB 3.0, PCIe, Gbit Ethernet
+
+Document Author
+---------------
+
+  Maxime Coquelin <maxime.coquelin@st.com>, (c) 2014 ST Microelectronics
diff --git a/Documentation/arch/arm/sti/stih418-overview.rst b/Documentation/arch/arm/sti/stih418-overview.rst
new file mode 100644
index 0000000000000..b563c1f4fe5ad
--- /dev/null
+++ b/Documentation/arch/arm/sti/stih418-overview.rst
@@ -0,0 +1,21 @@
+================
+STiH418 Overview
+================
+
+Introduction
+------------
+
+    The STiH418 is the new generation of SoC for UHDp60 set-top boxes
+    and server/connected client application for satellite, cable, terrestrial
+    and IP-STB markets.
+
+    Features
+    - ARM Cortex-A9 1.5 GHz quad core CPU (28nm)
+    - SATA2, USB 3.0, PCIe, Gbit Ethernet
+    - HEVC L5.1 Main 10
+    - VP9
+
+Document Author
+---------------
+
+  Maxime Coquelin <maxime.coquelin@st.com>, (c) 2015 ST Microelectronics
diff --git a/Documentation/arch/arm/stm32/overview.rst b/Documentation/arch/arm/stm32/overview.rst
new file mode 100644
index 0000000000000..85cfc84107983
--- /dev/null
+++ b/Documentation/arch/arm/stm32/overview.rst
@@ -0,0 +1,34 @@
+========================
+STM32 ARM Linux Overview
+========================
+
+Introduction
+------------
+
+The STMicroelectronics STM32 family of Cortex-A microprocessors (MPUs) and
+Cortex-M microcontrollers (MCUs) are supported by the 'STM32' platform of
+ARM Linux.
+
+Configuration
+-------------
+
+For MCUs, use the provided default configuration:
+        make stm32_defconfig
+For MPUs, use multi_v7 configuration:
+        make multi_v7_defconfig
+
+Layout
+------
+
+All the files for multiple machine families are located in the platform code
+contained in arch/arm/mach-stm32
+
+There is a generic board board-dt.c in the mach folder which support
+Flattened Device Tree, which means, it works with any compatible board with
+Device Trees.
+
+:Authors:
+
+- Maxime Coquelin <mcoquelin.stm32@gmail.com>
+- Ludovic Barre <ludovic.barre@st.com>
+- Gerald Baeza <gerald.baeza@st.com>
diff --git a/Documentation/arch/arm/stm32/stm32-dma-mdma-chaining.rst b/Documentation/arch/arm/stm32/stm32-dma-mdma-chaining.rst
new file mode 100644
index 0000000000000..2945e0e331047
--- /dev/null
+++ b/Documentation/arch/arm/stm32/stm32-dma-mdma-chaining.rst
@@ -0,0 +1,415 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+STM32 DMA-MDMA chaining
+=======================
+
+
+Introduction
+------------
+
+  This document describes the STM32 DMA-MDMA chaining feature. But before going
+  further, let's introduce the peripherals involved.
+
+  To offload data transfers from the CPU, STM32 microprocessors (MPUs) embed
+  direct memory access controllers (DMA).
+
+  STM32MP1 SoCs embed both STM32 DMA and STM32 MDMA controllers. STM32 DMA
+  request routing capabilities are enhanced by a DMA request multiplexer
+  (STM32 DMAMUX).
+
+  **STM32 DMAMUX**
+
+  STM32 DMAMUX routes any DMA request from a given peripheral to any STM32 DMA
+  controller (STM32MP1 counts two STM32 DMA controllers) channels.
+
+  **STM32 DMA**
+
+  STM32 DMA is mainly used to implement central data buffer storage (usually in
+  the system SRAM) for different peripheral. It can access external RAMs but
+  without the ability to generate convenient burst transfer ensuring the best
+  load of the AXI.
+
+  **STM32 MDMA**
+
+  STM32 MDMA (Master DMA) is mainly used to manage direct data transfers between
+  RAM data buffers without CPU intervention. It can also be used in a
+  hierarchical structure that uses STM32 DMA as first level data buffer
+  interfaces for AHB peripherals, while the STM32 MDMA acts as a second level
+  DMA with better performance. As a AXI/AHB master, STM32 MDMA can take control
+  of the AXI/AHB bus.
+
+
+Principles
+----------
+
+  STM32 DMA-MDMA chaining feature relies on the strengths of STM32 DMA and
+  STM32 MDMA controllers.
+
+  STM32 DMA has a circular Double Buffer Mode (DBM). At each end of transaction
+  (when DMA data counter - DMA_SxNDTR - reaches 0), the memory pointers
+  (configured with DMA_SxSM0AR and DMA_SxM1AR) are swapped and the DMA data
+  counter is automatically reloaded. This allows the SW or the STM32 MDMA to
+  process one memory area while the second memory area is being filled/used by
+  the STM32 DMA transfer.
+
+  With STM32 MDMA linked-list mode, a single request initiates the data array
+  (collection of nodes) to be transferred until the linked-list pointer for the
+  channel is null. The channel transfer complete of the last node is the end of
+  transfer, unless first and last nodes are linked to each other, in such a
+  case, the linked-list loops on to create a circular MDMA transfer.
+
+  STM32 MDMA has direct connections with STM32 DMA. This enables autonomous
+  communication and synchronization between peripherals, thus saving CPU
+  resources and bus congestion. Transfer Complete signal of STM32 DMA channel
+  can triggers STM32 MDMA transfer. STM32 MDMA can clear the request generated
+  by the STM32 DMA by writing to its Interrupt Clear register (whose address is
+  stored in MDMA_CxMAR, and bit mask in MDMA_CxMDR).
+
+  .. table:: STM32 MDMA interconnect table with STM32 DMA
+
+    +--------------+----------------+-----------+------------+
+    | STM32 DMAMUX | STM32 DMA      | STM32 DMA | STM32 MDMA |
+    | channels     | channels       | Transfer  | request    |
+    |              |                | complete  |            |
+    |              |                | signal    |            |
+    +==============+================+===========+============+
+    | Channel *0*  | DMA1 channel 0 | dma1_tcf0 | *0x00*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *1*  | DMA1 channel 1 | dma1_tcf1 | *0x01*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *2*  | DMA1 channel 2 | dma1_tcf2 | *0x02*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *3*  | DMA1 channel 3 | dma1_tcf3 | *0x03*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *4*  | DMA1 channel 4 | dma1_tcf4 | *0x04*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *5*  | DMA1 channel 5 | dma1_tcf5 | *0x05*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *6*  | DMA1 channel 6 | dma1_tcf6 | *0x06*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *7*  | DMA1 channel 7 | dma1_tcf7 | *0x07*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *8*  | DMA2 channel 0 | dma2_tcf0 | *0x08*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *9*  | DMA2 channel 1 | dma2_tcf1 | *0x09*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *10* | DMA2 channel 2 | dma2_tcf2 | *0x0A*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *11* | DMA2 channel 3 | dma2_tcf3 | *0x0B*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *12* | DMA2 channel 4 | dma2_tcf4 | *0x0C*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *13* | DMA2 channel 5 | dma2_tcf5 | *0x0D*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *14* | DMA2 channel 6 | dma2_tcf6 | *0x0E*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *15* | DMA2 channel 7 | dma2_tcf7 | *0x0F*     |
+    +--------------+----------------+-----------+------------+
+
+  STM32 DMA-MDMA chaining feature then uses a SRAM buffer. STM32MP1 SoCs embed
+  three fast access static internal RAMs of various size, used for data storage.
+  Due to STM32 DMA legacy (within microcontrollers), STM32 DMA performances are
+  bad with DDR, while they are optimal with SRAM. Hence the SRAM buffer used
+  between STM32 DMA and STM32 MDMA. This buffer is split in two equal periods
+  and STM32 DMA uses one period while STM32 MDMA uses the other period
+  simultaneously.
+  ::
+
+                    dma[1:2]-tcf[0:7]
+                   .----------------.
+     ____________ '    _________     V____________
+    | STM32 DMA  |    /  __|>_  \    | STM32 MDMA |
+    |------------|   |  /     \  |   |------------|
+    | DMA_SxM0AR |<=>| | SRAM  | |<=>| []-[]...[] |
+    | DMA_SxM1AR |   |  \_____/  |   |            |
+    |____________|    \___<|____/    |____________|
+
+  STM32 DMA-MDMA chaining uses (struct dma_slave_config).peripheral_config to
+  exchange the parameters needed to configure MDMA. These parameters are
+  gathered into a u32 array with three values:
+
+  * the STM32 MDMA request (which is actually the DMAMUX channel ID),
+  * the address of the STM32 DMA register to clear the Transfer Complete
+    interrupt flag,
+  * the mask of the Transfer Complete interrupt flag of the STM32 DMA channel.
+
+Device Tree updates for STM32 DMA-MDMA chaining support
+-------------------------------------------------------
+
+  **1. Allocate a SRAM buffer**
+
+    SRAM device tree node is defined in SoC device tree. You can refer to it in
+    your board device tree to define your SRAM pool.
+    ::
+
+          &sram {
+                  my_foo_device_dma_pool: dma-sram@0 {
+                          reg = <0x0 0x1000>;
+                  };
+          };
+
+    Be careful of the start index, in case there are other SRAM consumers.
+    Define your pool size strategically: to optimise chaining, the idea is that
+    STM32 DMA and STM32 MDMA can work simultaneously, on each buffer of the
+    SRAM.
+    If the SRAM period is greater than the expected DMA transfer, then STM32 DMA
+    and STM32 MDMA will work sequentially instead of simultaneously. It is not a
+    functional issue but it is not optimal.
+
+    Don't forget to refer to your SRAM pool in your device node. You need to
+    define a new property.
+    ::
+
+          &my_foo_device {
+                  ...
+                  my_dma_pool = &my_foo_device_dma_pool;
+          };
+
+    Then get this SRAM pool in your foo driver and allocate your SRAM buffer.
+
+  **2. Allocate a STM32 DMA channel and a STM32 MDMA channel**
+
+    You need to define an extra channel in your device tree node, in addition to
+    the one you should already have for "classic" DMA operation.
+
+    This new channel must be taken from STM32 MDMA channels, so, the phandle of
+    the DMA controller to use is the MDMA controller's one.
+    ::
+
+          &my_foo_device {
+                  [...]
+                  my_dma_pool = &my_foo_device_dma_pool;
+                  dmas = <&dmamux1 ...>,                // STM32 DMA channel
+                         <&mdma1 0 0x3 0x1200000a 0 0>; // + STM32 MDMA channel
+          };
+
+    Concerning STM32 MDMA bindings:
+
+    1. The request line number : whatever the value here, it will be overwritten
+    by MDMA driver with the STM32 DMAMUX channel ID passed through
+    (struct dma_slave_config).peripheral_config
+
+    2. The priority level : choose Very High (0x3) so that your channel will
+    take priority other the other during request arbitration
+
+    3. A 32bit mask specifying the DMA channel configuration : source and
+    destination address increment, block transfer with 128 bytes per single
+    transfer
+
+    4. The 32bit value specifying the register to be used to acknowledge the
+    request: it will be overwritten by MDMA driver, with the DMA channel
+    interrupt flag clear register address passed through
+    (struct dma_slave_config).peripheral_config
+
+    5. The 32bit mask specifying the value to be written to acknowledge the
+    request: it will be overwritten by MDMA driver, with the DMA channel
+    Transfer Complete flag passed through
+    (struct dma_slave_config).peripheral_config
+
+Driver updates for STM32 DMA-MDMA chaining support in foo driver
+----------------------------------------------------------------
+
+  **0. (optional) Refactor the original sg_table if dmaengine_prep_slave_sg()**
+
+    In case of dmaengine_prep_slave_sg(), the original sg_table can't be used as
+    is. Two new sg_tables must be created from the original one. One for
+    STM32 DMA transfer (where memory address targets now the SRAM buffer instead
+    of DDR buffer) and one for STM32 MDMA transfer (where memory address targets
+    the DDR buffer).
+
+    The new sg_list items must fit SRAM period length. Here is an example for
+    DMA_DEV_TO_MEM:
+    ::
+
+      /*
+        * Assuming sgl and nents, respectively the initial scatterlist and its
+        * length.
+        * Assuming sram_dma_buf and sram_period, respectively the memory
+        * allocated from the pool for DMA usage, and the length of the period,
+        * which is half of the sram_buf size.
+        */
+      struct sg_table new_dma_sgt, new_mdma_sgt;
+      struct scatterlist *s, *_sgl;
+      dma_addr_t ddr_dma_buf;
+      u32 new_nents = 0, len;
+      int i;
+
+      /* Count the number of entries needed */
+      for_each_sg(sgl, s, nents, i)
+              if (sg_dma_len(s) > sram_period)
+                      new_nents += DIV_ROUND_UP(sg_dma_len(s), sram_period);
+              else
+                      new_nents++;
+
+      /* Create sg table for STM32 DMA channel */
+      ret = sg_alloc_table(&new_dma_sgt, new_nents, GFP_ATOMIC);
+      if (ret)
+              dev_err(dev, "DMA sg table alloc failed\n");
+
+      for_each_sg(new_dma_sgt.sgl, s, new_dma_sgt.nents, i) {
+              _sgl = sgl;
+              sg_dma_len(s) = min(sg_dma_len(_sgl), sram_period);
+              /* Targets the beginning = first half of the sram_buf */
+              s->dma_address = sram_buf;
+              /*
+                * Targets the second half of the sram_buf
+                * for odd indexes of the item of the sg_list
+                */
+              if (i & 1)
+                      s->dma_address += sram_period;
+      }
+
+      /* Create sg table for STM32 MDMA channel */
+      ret = sg_alloc_table(&new_mdma_sgt, new_nents, GFP_ATOMIC);
+      if (ret)
+              dev_err(dev, "MDMA sg_table alloc failed\n");
+
+      _sgl = sgl;
+      len = sg_dma_len(sgl);
+      ddr_dma_buf = sg_dma_address(sgl);
+      for_each_sg(mdma_sgt.sgl, s, mdma_sgt.nents, i) {
+              size_t bytes = min_t(size_t, len, sram_period);
+
+              sg_dma_len(s) = bytes;
+              sg_dma_address(s) = ddr_dma_buf;
+              len -= bytes;
+
+              if (!len && sg_next(_sgl)) {
+                      _sgl = sg_next(_sgl);
+                      len = sg_dma_len(_sgl);
+                      ddr_dma_buf = sg_dma_address(_sgl);
+              } else {
+                      ddr_dma_buf += bytes;
+              }
+      }
+
+    Don't forget to release these new sg_tables after getting the descriptors
+    with dmaengine_prep_slave_sg().
+
+  **1. Set controller specific parameters**
+
+    First, use dmaengine_slave_config() with a struct dma_slave_config to
+    configure STM32 DMA channel. You just have to take care of DMA addresses,
+    the memory address (depending on the transfer direction) must point on your
+    SRAM buffer, and set (struct dma_slave_config).peripheral_size != 0.
+
+    STM32 DMA driver will check (struct dma_slave_config).peripheral_size to
+    determine if chaining is being used or not. If it is used, then STM32 DMA
+    driver fills (struct dma_slave_config).peripheral_config with an array of
+    three u32 : the first one containing STM32 DMAMUX channel ID, the second one
+    the channel interrupt flag clear register address, and the third one the
+    channel Transfer Complete flag mask.
+
+    Then, use dmaengine_slave_config with another struct dma_slave_config to
+    configure STM32 MDMA channel. Take care of DMA addresses, the device address
+    (depending on the transfer direction) must point on your SRAM buffer, and
+    the memory address must point to the buffer originally used for "classic"
+    DMA operation. Use the previous (struct dma_slave_config).peripheral_size
+    and .peripheral_config that have been updated by STM32 DMA driver, to set
+    (struct dma_slave_config).peripheral_size and .peripheral_config of the
+    struct dma_slave_config to configure STM32 MDMA channel.
+    ::
+
+      struct dma_slave_config dma_conf;
+      struct dma_slave_config mdma_conf;
+
+      memset(&dma_conf, 0, sizeof(dma_conf));
+      [...]
+      config.direction = DMA_DEV_TO_MEM;
+      config.dst_addr = sram_dma_buf;        // SRAM buffer
+      config.peripheral_size = 1;            // peripheral_size != 0 => chaining
+
+      dmaengine_slave_config(dma_chan, &dma_config);
+
+      memset(&mdma_conf, 0, sizeof(mdma_conf));
+      config.direction = DMA_DEV_TO_MEM;
+      mdma_conf.src_addr = sram_dma_buf;     // SRAM buffer
+      mdma_conf.dst_addr = rx_dma_buf;       // original memory buffer
+      mdma_conf.peripheral_size = dma_conf.peripheral_size;       // <- dma_conf
+      mdma_conf.peripheral_config = dma_config.peripheral_config; // <- dma_conf
+
+      dmaengine_slave_config(mdma_chan, &mdma_conf);
+
+  **2. Get a descriptor for STM32 DMA channel transaction**
+
+    In the same way you get your descriptor for your "classic" DMA operation,
+    you just have to replace the original sg_list (in case of
+    dmaengine_prep_slave_sg()) with the new sg_list using SRAM buffer, or to
+    replace the original buffer address, length and period (in case of
+    dmaengine_prep_dma_cyclic()) with the new SRAM buffer.
+
+  **3. Get a descriptor for STM32 MDMA channel transaction**
+
+    If you previously get descriptor (for STM32 DMA) with
+
+    * dmaengine_prep_slave_sg(), then use dmaengine_prep_slave_sg() for
+      STM32 MDMA;
+    * dmaengine_prep_dma_cyclic(), then use dmaengine_prep_dma_cyclic() for
+      STM32 MDMA.
+
+    Use the new sg_list using SRAM buffer (in case of dmaengine_prep_slave_sg())
+    or, depending on the transfer direction, either the original DDR buffer (in
+    case of DMA_DEV_TO_MEM) or the SRAM buffer (in case of DMA_MEM_TO_DEV), the
+    source address being previously set with dmaengine_slave_config().
+
+  **4. Submit both transactions**
+
+    Before submitting your transactions, you may need to define on which
+    descriptor you want a callback to be called at the end of the transfer
+    (dmaengine_prep_slave_sg()) or the period (dmaengine_prep_dma_cyclic()).
+    Depending on the direction, set the callback on the descriptor that finishes
+    the overal transfer:
+
+    * DMA_DEV_TO_MEM: set the callback on the "MDMA" descriptor
+    * DMA_MEM_TO_DEV: set the callback on the "DMA" descriptor
+
+    Then, submit the descriptors whatever the order, with dmaengine_tx_submit().
+
+  **5. Issue pending requests (and wait for callback notification)**
+
+  As STM32 MDMA channel transfer is triggered by STM32 DMA, you must issue
+  STM32 MDMA channel before STM32 DMA channel.
+
+  If any, your callback will be called to warn you about the end of the overal
+  transfer or the period completion.
+
+  Don't forget to terminate both channels. STM32 DMA channel is configured in
+  cyclic Double-Buffer mode so it won't be disabled by HW, you need to terminate
+  it. STM32 MDMA channel will be stopped by HW in case of sg transfer, but not
+  in case of cyclic transfer. You can terminate it whatever the kind of transfer.
+
+  **STM32 DMA-MDMA chaining DMA_MEM_TO_DEV special case**
+
+  STM32 DMA-MDMA chaining in DMA_MEM_TO_DEV is a special case. Indeed, the
+  STM32 MDMA feeds the SRAM buffer with the DDR data, and the STM32 DMA reads
+  data from SRAM buffer. So some data (the first period) have to be copied in
+  SRAM buffer when the STM32 DMA starts to read.
+
+  A trick could be pausing the STM32 DMA channel (that will raise a Transfer
+  Complete signal, triggering the STM32 MDMA channel), but the first data read
+  by the STM32 DMA could be "wrong". The proper way is to prepare the first SRAM
+  period with dmaengine_prep_dma_memcpy(). Then this first period should be
+  "removed" from the sg or the cyclic transfer.
+
+  Due to this complexity, rather use the STM32 DMA-MDMA chaining for
+  DMA_DEV_TO_MEM and keep the "classic" DMA usage for DMA_MEM_TO_DEV, unless
+  you're not afraid.
+
+Resources
+---------
+
+  Application note, datasheet and reference manual are available on ST website
+  (STM32MP1_).
+
+  Dedicated focus on three application notes (AN5224_, AN4031_ & AN5001_)
+  dealing with STM32 DMAMUX, STM32 DMA and STM32 MDMA.
+
+.. _STM32MP1: https://www.st.com/en/microcontrollers-microprocessors/stm32mp1-series.html
+.. _AN5224: https://www.st.com/resource/en/application_note/an5224-stm32-dmamux-the-dma-request-router-stmicroelectronics.pdf
+.. _AN4031: https://www.st.com/resource/en/application_note/dm00046011-using-the-stm32f2-stm32f4-and-stm32f7-series-dma-controller-stmicroelectronics.pdf
+.. _AN5001: https://www.st.com/resource/en/application_note/an5001-stm32cube-expansion-package-for-stm32h7-series-mdma-stmicroelectronics.pdf
+
+:Authors:
+
+- Amelie Delaunay <amelie.delaunay@foss.st.com>
\ No newline at end of file
diff --git a/Documentation/arch/arm/stm32/stm32f429-overview.rst b/Documentation/arch/arm/stm32/stm32f429-overview.rst
new file mode 100644
index 0000000000000..a7ebe8ea66970
--- /dev/null
+++ b/Documentation/arch/arm/stm32/stm32f429-overview.rst
@@ -0,0 +1,25 @@
+==================
+STM32F429 Overview
+==================
+
+Introduction
+------------
+
+The STM32F429 is a Cortex-M4 MCU aimed at various applications.
+It features:
+
+- ARM Cortex-M4 up to 180MHz with FPU
+- 2MB internal Flash Memory
+- External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
+- I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
+- LCD controller & Camera interface
+- Cryptographic processor
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F429_).
+
+.. _STM32F429: http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
+
+:Authors: Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arch/arm/stm32/stm32f746-overview.rst b/Documentation/arch/arm/stm32/stm32f746-overview.rst
new file mode 100644
index 0000000000000..78befddc77405
--- /dev/null
+++ b/Documentation/arch/arm/stm32/stm32f746-overview.rst
@@ -0,0 +1,32 @@
+==================
+STM32F746 Overview
+==================
+
+Introduction
+------------
+
+The STM32F746 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @216MHz
+- 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F746_).
+
+.. _STM32F746: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
+
+:Authors: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arch/arm/stm32/stm32f769-overview.rst b/Documentation/arch/arm/stm32/stm32f769-overview.rst
new file mode 100644
index 0000000000000..e482980ddf212
--- /dev/null
+++ b/Documentation/arch/arm/stm32/stm32f769-overview.rst
@@ -0,0 +1,34 @@
+==================
+STM32F769 Overview
+==================
+
+Introduction
+------------
+
+The STM32F769 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @216MHz
+- 2MB internal flash, 512KBytes internal RAM (+4KB of backup SRAM)
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support*2
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C*4, SPI*6, CAN*3 busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface*2
+- LCD controller
+- HDMI-CEC
+- DSI
+- SPDIFRX
+- MDIO salave interface
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F769_).
+
+.. _STM32F769: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32-high-performance-mcus/stm32f7-series/stm32f7x9/stm32f769ni.html
+
+:Authors: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arch/arm/stm32/stm32h743-overview.rst b/Documentation/arch/arm/stm32/stm32h743-overview.rst
new file mode 100644
index 0000000000000..4e15f1a42730a
--- /dev/null
+++ b/Documentation/arch/arm/stm32/stm32h743-overview.rst
@@ -0,0 +1,33 @@
+==================
+STM32H743 Overview
+==================
+
+Introduction
+------------
+
+The STM32H743 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @400MHz
+- 2MB internal flash, 1MBytes internal RAM
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+- DFSDM
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32H743_).
+
+.. _STM32H743: http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
+
+:Authors: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arch/arm/stm32/stm32h750-overview.rst b/Documentation/arch/arm/stm32/stm32h750-overview.rst
new file mode 100644
index 0000000000000..0e51235c95477
--- /dev/null
+++ b/Documentation/arch/arm/stm32/stm32h750-overview.rst
@@ -0,0 +1,34 @@
+==================
+STM32H750 Overview
+==================
+
+Introduction
+------------
+
+The STM32H750 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @480MHz
+- 128K internal flash, 1MBytes internal RAM
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+- DFSDM
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32H750_).
+
+.. _STM32H750: https://www.st.com/en/microcontrollers-microprocessors/stm32h750-value-line.html
+
+:Authors: Dillon Min <dillon.minfei@gmail.com>
+
diff --git a/Documentation/arch/arm/stm32/stm32mp13-overview.rst b/Documentation/arch/arm/stm32/stm32mp13-overview.rst
new file mode 100644
index 0000000000000..3bb9492dad49f
--- /dev/null
+++ b/Documentation/arch/arm/stm32/stm32mp13-overview.rst
@@ -0,0 +1,37 @@
+===================
+STM32MP13 Overview
+===================
+
+Introduction
+------------
+
+The STM32MP131/STM32MP133/STM32MP135 are Cortex-A MPU aimed at various applications.
+They feature:
+
+- One Cortex-A7 application core
+- Standard memories interface support
+- Standard connectivity, widely inherited from the STM32 MCU family
+- Comprehensive security support
+
+More details:
+
+- Cortex-A7 core running up to @900MHz
+- FMC controller to connect SDRAM, NOR and NAND memories
+- QSPI
+- SD/MMC/SDIO support
+- 2*Ethernet controller
+- CAN
+- ADC/DAC
+- USB EHCI/OHCI controllers
+- USB OTG
+- I2C, SPI, CAN busses support
+- Several general purpose timers
+- Serial Audio interface
+- LCD controller
+- DCMIPP
+- SPDIFRX
+- DFSDM
+
+:Authors:
+
+- Alexandre Torgue <alexandre.torgue@foss.st.com>
diff --git a/Documentation/arch/arm/stm32/stm32mp151-overview.rst b/Documentation/arch/arm/stm32/stm32mp151-overview.rst
new file mode 100644
index 0000000000000..f42a2ac309c07
--- /dev/null
+++ b/Documentation/arch/arm/stm32/stm32mp151-overview.rst
@@ -0,0 +1,36 @@
+===================
+STM32MP151 Overview
+===================
+
+Introduction
+------------
+
+The STM32MP151 is a Cortex-A MPU aimed at various applications.
+It features:
+
+- Single Cortex-A7 application core
+- Standard memories interface support
+- Standard connectivity, widely inherited from the STM32 MCU family
+- Comprehensive security support
+
+More details:
+
+- Cortex-A7 core running up to @800MHz
+- FMC controller to connect SDRAM, NOR and NAND memories
+- QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- ADC/DAC
+- USB EHCI/OHCI controllers
+- USB OTG
+- I2C, SPI busses support
+- Several general purpose timers
+- Serial Audio interface
+- LCD-TFT controller
+- DCMIPP
+- SPDIFRX
+- DFSDM
+
+:Authors:
+
+- Roan van Dijk <roan@protonic.nl>
diff --git a/Documentation/arch/arm/stm32/stm32mp157-overview.rst b/Documentation/arch/arm/stm32/stm32mp157-overview.rst
new file mode 100644
index 0000000000000..f62fdc8e7d8de
--- /dev/null
+++ b/Documentation/arch/arm/stm32/stm32mp157-overview.rst
@@ -0,0 +1,20 @@
+===================
+STM32MP157 Overview
+===================
+
+Introduction
+------------
+
+The STM32MP157 is a Cortex-A MPU aimed at various applications.
+It features:
+
+- Dual core Cortex-A7 application core
+- 2D/3D image composition with GPU
+- Standard memories interface support
+- Standard connectivity, widely inherited from the STM32 MCU family
+- Comprehensive security support
+
+:Authors:
+
+- Ludovic Barre <ludovic.barre@st.com>
+- Gerald Baeza <gerald.baeza@st.com>
diff --git a/Documentation/arch/arm/sunxi.rst b/Documentation/arch/arm/sunxi.rst
new file mode 100644
index 0000000000000..b85d1e2f2d473
--- /dev/null
+++ b/Documentation/arch/arm/sunxi.rst
@@ -0,0 +1,170 @@
+==================
+ARM Allwinner SoCs
+==================
+
+This document lists all the ARM Allwinner SoCs that are currently
+supported in mainline by the Linux kernel. This document will also
+provide links to documentation and/or datasheet for these SoCs.
+
+SunXi family
+------------
+  Linux kernel mach directory: arch/arm/mach-sunxi
+
+  Flavors:
+
+    * ARM926 based SoCs
+      - Allwinner F20 (sun3i)
+
+        * Not Supported
+
+    * ARM Cortex-A8 based SoCs
+      - Allwinner A10 (sun4i)
+
+        * Datasheet
+
+	  http://dl.linux-sunxi.org/A10/A10%20Datasheet%20-%20v1.21%20%282012-04-06%29.pdf
+	* User Manual
+
+	  http://dl.linux-sunxi.org/A10/A10%20User%20Manual%20-%20v1.20%20%282012-04-09%2c%20DECRYPTED%29.pdf
+
+      - Allwinner A10s (sun5i)
+
+        * Datasheet
+
+          http://dl.linux-sunxi.org/A10s/A10s%20Datasheet%20-%20v1.20%20%282012-03-27%29.pdf
+
+      - Allwinner A13 / R8 (sun5i)
+
+        * Datasheet
+
+	  http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
+        * User Manual
+
+          http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-01-08%29.pdf
+
+      - Next Thing Co GR8 (sun5i)
+
+    * Single ARM Cortex-A7 based SoCs
+      - Allwinner V3s (sun8i)
+
+        * Datasheet
+
+          http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
+
+    * Dual ARM Cortex-A7 based SoCs
+      - Allwinner A20 (sun7i)
+
+        * User Manual
+
+          http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
+
+      - Allwinner A23 (sun8i)
+
+        * Datasheet
+
+          http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf
+
+        * User Manual
+
+          http://dl.linux-sunxi.org/A23/A23%20User%20Manual%20V1.0%2020130830.pdf
+
+    * Quad ARM Cortex-A7 based SoCs
+      - Allwinner A31 (sun6i)
+
+        * Datasheet
+
+          http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20datasheet%20V1.3%2020131106.pdf
+
+        * User Manual
+
+          http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20user%20manual%20V1.1%2020130630.pdf
+
+      - Allwinner A31s (sun6i)
+
+        * Datasheet
+
+          http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20datasheet%20V1.3%2020131106.pdf
+
+        * User Manual
+
+          http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf
+
+      - Allwinner A33 (sun8i)
+
+        * Datasheet
+
+          http://dl.linux-sunxi.org/A33/A33%20Datasheet%20release%201.1.pdf
+
+        * User Manual
+
+          http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
+
+      - Allwinner H2+ (sun8i)
+
+        * No document available now, but is known to be working properly with
+          H3 drivers and memory map.
+
+      - Allwinner H3 (sun8i)
+
+        * Datasheet
+
+          https://linux-sunxi.org/images/4/4b/Allwinner_H3_Datasheet_V1.2.pdf
+
+      - Allwinner R40 (sun8i)
+
+        * Datasheet
+
+          https://github.com/tinalinux/docs/raw/r40-v1.y/R40_Datasheet_V1.0.pdf
+
+        * User Manual
+
+          https://github.com/tinalinux/docs/raw/r40-v1.y/Allwinner_R40_User_Manual_V1.0.pdf
+
+    * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
+      - Allwinner A80
+
+        * Datasheet
+
+	  http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf
+
+    * Octa ARM Cortex-A7 based SoCs
+      - Allwinner A83T
+
+        * Datasheet
+
+          https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_Datasheet_v1.3_20150510.pdf
+
+        * User Manual
+
+          https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_User_Manual_v1.5.1_20150513.pdf
+
+    * Quad ARM Cortex-A53 based SoCs
+      - Allwinner A64
+
+        * Datasheet
+
+          http://dl.linux-sunxi.org/A64/A64_Datasheet_V1.1.pdf
+
+        * User Manual
+
+          http://dl.linux-sunxi.org/A64/Allwinner%20A64%20User%20Manual%20v1.0.pdf
+
+      - Allwinner H6
+
+	* Datasheet
+
+	  https://linux-sunxi.org/images/5/5c/Allwinner_H6_V200_Datasheet_V1.1.pdf
+
+	* User Manual
+
+	  https://linux-sunxi.org/images/4/46/Allwinner_H6_V200_User_Manual_V1.1.pdf
+
+      - Allwinner H616
+
+	* Datasheet
+
+	  https://linux-sunxi.org/images/b/b9/H616_Datasheet_V1.0_cleaned.pdf
+
+	* User Manual
+
+	  https://linux-sunxi.org/images/2/24/H616_User_Manual_V1.0_cleaned.pdf
diff --git a/Documentation/arch/arm/sunxi/clocks.rst b/Documentation/arch/arm/sunxi/clocks.rst
new file mode 100644
index 0000000000000..23bd03f3e21f4
--- /dev/null
+++ b/Documentation/arch/arm/sunxi/clocks.rst
@@ -0,0 +1,57 @@
+=======================================================
+Frequently asked questions about the sunxi clock system
+=======================================================
+
+This document contains useful bits of information that people tend to ask
+about the sunxi clock system, as well as accompanying ASCII art when adequate.
+
+Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
+   system?
+
+A: The 24MHz oscillator allows gating to save power. Indeed, if gated
+   carelessly the system would stop functioning, but with the right
+   steps, one can gate it and keep the system running. Consider this
+   simplified suspend example:
+
+   While the system is operational, you would see something like::
+
+      24MHz         32kHz
+       |
+      PLL1
+       \
+        \_ CPU Mux
+             |
+           [CPU]
+
+   When you are about to suspend, you switch the CPU Mux to the 32kHz
+   oscillator::
+
+      24Mhz         32kHz
+       |              |
+      PLL1            |
+                     /
+           CPU Mux _/
+             |
+           [CPU]
+
+    Finally you can gate the main oscillator::
+
+                    32kHz
+                      |
+                      |
+                     /
+           CPU Mux _/
+             |
+           [CPU]
+
+Q: Were can I learn more about the sunxi clocks?
+
+A: The linux-sunxi wiki contains a page documenting the clock registers,
+   you can find it at
+
+        http://linux-sunxi.org/A10/CCM
+
+   The authoritative source for information at this time is the ccmu driver
+   released by Allwinner, you can find it at
+
+        https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu
diff --git a/Documentation/arch/arm/swp_emulation.rst b/Documentation/arch/arm/swp_emulation.rst
new file mode 100644
index 0000000000000..6a608a9c37158
--- /dev/null
+++ b/Documentation/arch/arm/swp_emulation.rst
@@ -0,0 +1,27 @@
+Software emulation of deprecated SWP instruction (CONFIG_SWP_EMULATE)
+---------------------------------------------------------------------
+
+ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommeds
+moving to the load-locked/store-conditional instructions LDREX and STREX.
+
+ARMv7 multiprocessing extensions introduce the ability to disable these
+instructions, triggering an undefined instruction exception when executed.
+Trapped instructions are emulated using an LDREX/STREX or LDREXB/STREXB
+sequence. If a memory access fault (an abort) occurs, a segmentation fault is
+signalled to the triggering process.
+
+/proc/cpu/swp_emulation holds some statistics/information, including the PID of
+the last process to trigger the emulation to be invocated. For example::
+
+  Emulated SWP:		12
+  Emulated SWPB:		0
+  Aborted SWP{B}:		1
+  Last process:		314
+
+
+NOTE:
+  when accessing uncached shared regions, LDREX/STREX rely on an external
+  transaction monitoring block called a global monitor to maintain update
+  atomicity. If your system does not implement a global monitor, this option can
+  cause programs that perform SWP operations to uncached memory to deadlock, as
+  the STREX operation will always fail.
diff --git a/Documentation/arch/arm/tcm.rst b/Documentation/arch/arm/tcm.rst
new file mode 100644
index 0000000000000..1dc6c39220f98
--- /dev/null
+++ b/Documentation/arch/arm/tcm.rst
@@ -0,0 +1,161 @@
+==================================================
+ARM TCM (Tightly-Coupled Memory) handling in Linux
+==================================================
+
+Written by Linus Walleij <linus.walleij@stericsson.com>
+
+Some ARM SoCs have a so-called TCM (Tightly-Coupled Memory).
+This is usually just a few (4-64) KiB of RAM inside the ARM
+processor.
+
+Due to being embedded inside the CPU, the TCM has a
+Harvard-architecture, so there is an ITCM (instruction TCM)
+and a DTCM (data TCM). The DTCM can not contain any
+instructions, but the ITCM can actually contain data.
+The size of DTCM or ITCM is minimum 4KiB so the typical
+minimum configuration is 4KiB ITCM and 4KiB DTCM.
+
+ARM CPUs have special registers to read out status, physical
+location and size of TCM memories. arch/arm/include/asm/cputype.h
+defines a CPUID_TCM register that you can read out from the
+system control coprocessor. Documentation from ARM can be found
+at http://infocenter.arm.com, search for "TCM Status Register"
+to see documents for all CPUs. Reading this register you can
+determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present
+in the machine.
+
+There is further a TCM region register (search for "TCM Region
+Registers" at the ARM site) that can report and modify the location
+size of TCM memories at runtime. This is used to read out and modify
+TCM location and size. Notice that this is not a MMU table: you
+actually move the physical location of the TCM around. At the
+place you put it, it will mask any underlying RAM from the
+CPU so it is usually wise not to overlap any physical RAM with
+the TCM.
+
+The TCM memory can then be remapped to another address again using
+the MMU, but notice that the TCM is often used in situations where
+the MMU is turned off. To avoid confusion the current Linux
+implementation will map the TCM 1 to 1 from physical to virtual
+memory in the location specified by the kernel. Currently Linux
+will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and
+on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM.
+
+Newer versions of the region registers also support dividing these
+TCMs in two separate banks, so for example an 8KiB ITCM is divided
+into two 4KiB banks with its own control registers. The idea is to
+be able to lock and hide one of the banks for use by the secure
+world (TrustZone).
+
+TCM is used for a few things:
+
+- FIQ and other interrupt handlers that need deterministic
+  timing and cannot wait for cache misses.
+
+- Idle loops where all external RAM is set to self-refresh
+  retention mode, so only on-chip RAM is accessible by
+  the CPU and then we hang inside ITCM waiting for an
+  interrupt.
+
+- Other operations which implies shutting off or reconfiguring
+  the external RAM controller.
+
+There is an interface for using TCM on the ARM architecture
+in <asm/tcm.h>. Using this interface it is possible to:
+
+- Define the physical address and size of ITCM and DTCM.
+
+- Tag functions to be compiled into ITCM.
+
+- Tag data and constants to be allocated to DTCM and ITCM.
+
+- Have the remaining TCM RAM added to a special
+  allocation pool with gen_pool_create() and gen_pool_add()
+  and provice tcm_alloc() and tcm_free() for this
+  memory. Such a heap is great for things like saving
+  device state when shutting off device power domains.
+
+A machine that has TCM memory shall select HAVE_TCM from
+arch/arm/Kconfig for itself. Code that needs to use TCM shall
+#include <asm/tcm.h>
+
+Functions to go into itcm can be tagged like this:
+int __tcmfunc foo(int bar);
+
+Since these are marked to become long_calls and you may want
+to have functions called locally inside the TCM without
+wasting space, there is also the __tcmlocalfunc prefix that
+will make the call relative.
+
+Variables to go into dtcm can be tagged like this::
+
+  int __tcmdata foo;
+
+Constants can be tagged like this::
+
+  int __tcmconst foo;
+
+To put assembler into TCM just use::
+
+  .section ".tcm.text" or .section ".tcm.data"
+
+respectively.
+
+Example code::
+
+  #include <asm/tcm.h>
+
+  /* Uninitialized data */
+  static u32 __tcmdata tcmvar;
+  /* Initialized data */
+  static u32 __tcmdata tcmassigned = 0x2BADBABEU;
+  /* Constant */
+  static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
+
+  static void __tcmlocalfunc tcm_to_tcm(void)
+  {
+	int i;
+	for (i = 0; i < 100; i++)
+		tcmvar ++;
+  }
+
+  static void __tcmfunc hello_tcm(void)
+  {
+	/* Some abstract code that runs in ITCM */
+	int i;
+	for (i = 0; i < 100; i++) {
+		tcmvar ++;
+	}
+	tcm_to_tcm();
+  }
+
+  static void __init test_tcm(void)
+  {
+	u32 *tcmem;
+	int i;
+
+	hello_tcm();
+	printk("Hello TCM executed from ITCM RAM\n");
+
+	printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar);
+	tcmvar = 0xDEADBEEFU;
+	printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar);
+
+	printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned);
+
+	printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst);
+
+	/* Allocate some TCM memory from the pool */
+	tcmem = tcm_alloc(20);
+	if (tcmem) {
+		printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem);
+		tcmem[0] = 0xDEADBEEFU;
+		tcmem[1] = 0x2BADBABEU;
+		tcmem[2] = 0xCAFEBABEU;
+		tcmem[3] = 0xDEADBEEFU;
+		tcmem[4] = 0x2BADBABEU;
+		for (i = 0; i < 5; i++)
+			printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
+		tcm_free(tcmem, 20);
+	}
+  }
diff --git a/Documentation/arch/arm/uefi.rst b/Documentation/arch/arm/uefi.rst
new file mode 100644
index 0000000000000..baebe688a0064
--- /dev/null
+++ b/Documentation/arch/arm/uefi.rst
@@ -0,0 +1,70 @@
+================================================
+The Unified Extensible Firmware Interface (UEFI)
+================================================
+
+UEFI, the Unified Extensible Firmware Interface, is a specification
+governing the behaviours of compatible firmware interfaces. It is
+maintained by the UEFI Forum - http://www.uefi.org/.
+
+UEFI is an evolution of its predecessor 'EFI', so the terms EFI and
+UEFI are used somewhat interchangeably in this document and associated
+source code. As a rule, anything new uses 'UEFI', whereas 'EFI' refers
+to legacy code or specifications.
+
+UEFI support in Linux
+=====================
+Booting on a platform with firmware compliant with the UEFI specification
+makes it possible for the kernel to support additional features:
+
+- UEFI Runtime Services
+- Retrieving various configuration information through the standardised
+  interface of UEFI configuration tables. (ACPI, SMBIOS, ...)
+
+For actually enabling [U]EFI support, enable:
+
+- CONFIG_EFI=y
+- CONFIG_EFIVAR_FS=y or m
+
+The implementation depends on receiving information about the UEFI environment
+in a Flattened Device Tree (FDT) - so is only available with CONFIG_OF.
+
+UEFI stub
+=========
+The "stub" is a feature that extends the Image/zImage into a valid UEFI
+PE/COFF executable, including a loader application that makes it possible to
+load the kernel directly from the UEFI shell, boot menu, or one of the
+lightweight bootloaders like Gummiboot or rEFInd.
+
+The kernel image built with stub support remains a valid kernel image for
+booting in non-UEFI environments.
+
+UEFI kernel support on ARM
+==========================
+UEFI kernel support on the ARM architectures (arm and arm64) is only available
+when boot is performed through the stub.
+
+When booting in UEFI mode, the stub deletes any memory nodes from a provided DT.
+Instead, the kernel reads the UEFI memory map.
+
+The stub populates the FDT /chosen node with (and the kernel scans for) the
+following parameters:
+
+==========================  ======   ===========================================
+Name                        Size     Description
+==========================  ======   ===========================================
+linux,uefi-system-table     64-bit   Physical address of the UEFI System Table.
+
+linux,uefi-mmap-start       64-bit   Physical address of the UEFI memory map,
+                                     populated by the UEFI GetMemoryMap() call.
+
+linux,uefi-mmap-size        32-bit   Size in bytes of the UEFI memory map
+                                     pointed to in previous entry.
+
+linux,uefi-mmap-desc-size   32-bit   Size in bytes of each entry in the UEFI
+                                     memory map.
+
+linux,uefi-mmap-desc-ver    32-bit   Version of the mmap descriptor format.
+
+kaslr-seed                  64-bit   Entropy used to randomize the kernel image
+                                     base address location.
+==========================  ======   ===========================================
diff --git a/Documentation/arch/arm/vfp/release-notes.rst b/Documentation/arch/arm/vfp/release-notes.rst
new file mode 100644
index 0000000000000..c6b04937cee3a
--- /dev/null
+++ b/Documentation/arch/arm/vfp/release-notes.rst
@@ -0,0 +1,57 @@
+===============================================
+Release notes for Linux Kernel VFP support code
+===============================================
+
+Date: 	20 May 2004
+
+Author:	Russell King
+
+This is the first release of the Linux Kernel VFP support code.  It
+provides support for the exceptions bounced from VFP hardware found
+on ARM926EJ-S.
+
+This release has been validated against the SoftFloat-2b library by
+John R. Hauser using the TestFloat-2a test suite.  Details of this
+library and test suite can be found at:
+
+   http://www.jhauser.us/arithmetic/SoftFloat.html
+
+The operations which have been tested with this package are:
+
+ - fdiv
+ - fsub
+ - fadd
+ - fmul
+ - fcmp
+ - fcmpe
+ - fcvtd
+ - fcvts
+ - fsito
+ - ftosi
+ - fsqrt
+
+All the above pass softfloat tests with the following exceptions:
+
+- fadd/fsub shows some differences in the handling of +0 / -0 results
+  when input operands differ in signs.
+- the handling of underflow exceptions is slightly different.  If a
+  result underflows before rounding, but becomes a normalised number
+  after rounding, we do not signal an underflow exception.
+
+Other operations which have been tested by basic assembly-only tests
+are:
+
+ - fcpy
+ - fabs
+ - fneg
+ - ftoui
+ - ftosiz
+ - ftouiz
+
+The combination operations have not been tested:
+
+ - fmac
+ - fnmac
+ - fmsc
+ - fnmsc
+ - fnmul
diff --git a/Documentation/arch/arm/vlocks.rst b/Documentation/arch/arm/vlocks.rst
new file mode 100644
index 0000000000000..a40a1742110bc
--- /dev/null
+++ b/Documentation/arch/arm/vlocks.rst
@@ -0,0 +1,212 @@
+======================================
+vlocks for Bare-Metal Mutual Exclusion
+======================================
+
+Voting Locks, or "vlocks" provide a simple low-level mutual exclusion
+mechanism, with reasonable but minimal requirements on the memory
+system.
+
+These are intended to be used to coordinate critical activity among CPUs
+which are otherwise non-coherent, in situations where the hardware
+provides no other mechanism to support this and ordinary spinlocks
+cannot be used.
+
+
+vlocks make use of the atomicity provided by the memory system for
+writes to a single memory location.  To arbitrate, every CPU "votes for
+itself", by storing a unique number to a common memory location.  The
+final value seen in that memory location when all the votes have been
+cast identifies the winner.
+
+In order to make sure that the election produces an unambiguous result
+in finite time, a CPU will only enter the election in the first place if
+no winner has been chosen and the election does not appear to have
+started yet.
+
+
+Algorithm
+---------
+
+The easiest way to explain the vlocks algorithm is with some pseudo-code::
+
+
+	int currently_voting[NR_CPUS] = { 0, };
+	int last_vote = -1; /* no votes yet */
+
+	bool vlock_trylock(int this_cpu)
+	{
+		/* signal our desire to vote */
+		currently_voting[this_cpu] = 1;
+		if (last_vote != -1) {
+			/* someone already volunteered himself */
+			currently_voting[this_cpu] = 0;
+			return false; /* not ourself */
+		}
+
+		/* let's suggest ourself */
+		last_vote = this_cpu;
+		currently_voting[this_cpu] = 0;
+
+		/* then wait until everyone else is done voting */
+		for_each_cpu(i) {
+			while (currently_voting[i] != 0)
+				/* wait */;
+		}
+
+		/* result */
+		if (last_vote == this_cpu)
+			return true; /* we won */
+		return false;
+	}
+
+	bool vlock_unlock(void)
+	{
+		last_vote = -1;
+	}
+
+
+The currently_voting[] array provides a way for the CPUs to determine
+whether an election is in progress, and plays a role analogous to the
+"entering" array in Lamport's bakery algorithm [1].
+
+However, once the election has started, the underlying memory system
+atomicity is used to pick the winner.  This avoids the need for a static
+priority rule to act as a tie-breaker, or any counters which could
+overflow.
+
+As long as the last_vote variable is globally visible to all CPUs, it
+will contain only one value that won't change once every CPU has cleared
+its currently_voting flag.
+
+
+Features and limitations
+------------------------
+
+ * vlocks are not intended to be fair.  In the contended case, it is the
+   _last_ CPU which attempts to get the lock which will be most likely
+   to win.
+
+   vlocks are therefore best suited to situations where it is necessary
+   to pick a unique winner, but it does not matter which CPU actually
+   wins.
+
+ * Like other similar mechanisms, vlocks will not scale well to a large
+   number of CPUs.
+
+   vlocks can be cascaded in a voting hierarchy to permit better scaling
+   if necessary, as in the following hypothetical example for 4096 CPUs::
+
+	/* first level: local election */
+	my_town = towns[(this_cpu >> 4) & 0xf];
+	I_won = vlock_trylock(my_town, this_cpu & 0xf);
+	if (I_won) {
+		/* we won the town election, let's go for the state */
+		my_state = states[(this_cpu >> 8) & 0xf];
+		I_won = vlock_lock(my_state, this_cpu & 0xf));
+		if (I_won) {
+			/* and so on */
+			I_won = vlock_lock(the_whole_country, this_cpu & 0xf];
+			if (I_won) {
+				/* ... */
+			}
+			vlock_unlock(the_whole_country);
+		}
+		vlock_unlock(my_state);
+	}
+	vlock_unlock(my_town);
+
+
+ARM implementation
+------------------
+
+The current ARM implementation [2] contains some optimisations beyond
+the basic algorithm:
+
+ * By packing the members of the currently_voting array close together,
+   we can read the whole array in one transaction (providing the number
+   of CPUs potentially contending the lock is small enough).  This
+   reduces the number of round-trips required to external memory.
+
+   In the ARM implementation, this means that we can use a single load
+   and comparison::
+
+	LDR	Rt, [Rn]
+	CMP	Rt, #0
+
+   ...in place of code equivalent to::
+
+	LDRB	Rt, [Rn]
+	CMP	Rt, #0
+	LDRBEQ	Rt, [Rn, #1]
+	CMPEQ	Rt, #0
+	LDRBEQ	Rt, [Rn, #2]
+	CMPEQ	Rt, #0
+	LDRBEQ	Rt, [Rn, #3]
+	CMPEQ	Rt, #0
+
+   This cuts down on the fast-path latency, as well as potentially
+   reducing bus contention in contended cases.
+
+   The optimisation relies on the fact that the ARM memory system
+   guarantees coherency between overlapping memory accesses of
+   different sizes, similarly to many other architectures.  Note that
+   we do not care which element of currently_voting appears in which
+   bits of Rt, so there is no need to worry about endianness in this
+   optimisation.
+
+   If there are too many CPUs to read the currently_voting array in
+   one transaction then multiple transations are still required.  The
+   implementation uses a simple loop of word-sized loads for this
+   case.  The number of transactions is still fewer than would be
+   required if bytes were loaded individually.
+
+
+   In principle, we could aggregate further by using LDRD or LDM, but
+   to keep the code simple this was not attempted in the initial
+   implementation.
+
+
+ * vlocks are currently only used to coordinate between CPUs which are
+   unable to enable their caches yet.  This means that the
+   implementation removes many of the barriers which would be required
+   when executing the algorithm in cached memory.
+
+   packing of the currently_voting array does not work with cached
+   memory unless all CPUs contending the lock are cache-coherent, due
+   to cache writebacks from one CPU clobbering values written by other
+   CPUs.  (Though if all the CPUs are cache-coherent, you should be
+   probably be using proper spinlocks instead anyway).
+
+
+ * The "no votes yet" value used for the last_vote variable is 0 (not
+   -1 as in the pseudocode).  This allows statically-allocated vlocks
+   to be implicitly initialised to an unlocked state simply by putting
+   them in .bss.
+
+   An offset is added to each CPU's ID for the purpose of setting this
+   variable, so that no CPU uses the value 0 for its ID.
+
+
+Colophon
+--------
+
+Originally created and documented by Dave Martin for Linaro Limited, for
+use in ARM-based big.LITTLE platforms, with review and input gratefully
+received from Nicolas Pitre and Achin Gupta.  Thanks to Nicolas for
+grabbing most of this text out of the relevant mail thread and writing
+up the pseudocode.
+
+Copyright (C) 2012-2013  Linaro Limited
+Distributed under the terms of Version 2 of the GNU General Public
+License, as defined in linux/COPYING.
+
+
+References
+----------
+
+[1] Lamport, L. "A New Solution of Dijkstra's Concurrent Programming
+    Problem", Communications of the ACM 17, 8 (August 1974), 453-455.
+
+    https://en.wikipedia.org/wiki/Lamport%27s_bakery_algorithm
+
+[2] linux/arch/arm/common/vlock.S, www.kernel.org.
diff --git a/Documentation/arch/arm64/acpi_object_usage.rst b/Documentation/arch/arm64/acpi_object_usage.rst
new file mode 100644
index 0000000000000..1da22200fdf8f
--- /dev/null
+++ b/Documentation/arch/arm64/acpi_object_usage.rst
@@ -0,0 +1,809 @@
+===========
+ACPI Tables
+===========
+
+The expectations of individual ACPI tables are discussed in the list that
+follows.
+
+If a section number is used, it refers to a section number in the ACPI
+specification where the object is defined.  If "Signature Reserved" is used,
+the table signature (the first four bytes of the table) is the only portion
+of the table recognized by the specification, and the actual table is defined
+outside of the UEFI Forum (see Section 5.2.6 of the specification).
+
+For ACPI on arm64, tables also fall into the following categories:
+
+       -  Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT
+
+       -  Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT
+
+       -  Optional: AGDI, BGRT, CEDT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT,
+          HMAT, IBFT, IORT, MCHI, MPAM, MPST, MSCT, NFIT, PMTT, PPTT, RASF, SBST,
+          SDEI, SLIT, SPMI, SRAT, STAO, TCPA, TPM2, UEFI, XENV
+
+       -  Not supported: AEST, APMT, BOOT, DBGP, DMAR, ETDT, HPET, IVRS, LPIT,
+          MSDM, OEMx, PDTT, PSDT, RAS2, RSDT, SLIC, WAET, WDAT, WDRT, WPBT
+
+====== ========================================================================
+Table  Usage for ARMv8 Linux
+====== ========================================================================
+AEST   Signature Reserved (signature == "AEST")
+
+       **Arm Error Source Table**
+
+       This table informs the OS of any error nodes in the system that are
+       compliant with the Arm RAS architecture.
+
+AGDI   Signature Reserved (signature == "AGDI")
+
+       **Arm Generic diagnostic Dump and Reset Device Interface Table**
+
+       This table describes a non-maskable event, that is used by the platform
+       firmware, to request the OS to generate a diagnostic dump and reset the device.
+
+APMT   Signature Reserved (signature == "APMT")
+
+       **Arm Performance Monitoring Table**
+
+       This table describes the properties of PMU support implmented by
+       components in the system.
+
+BERT   Section 18.3 (signature == "BERT")
+
+       **Boot Error Record Table**
+
+       Must be supplied if RAS support is provided by the platform.  It
+       is recommended this table be supplied.
+
+BOOT   Signature Reserved (signature == "BOOT")
+
+       **simple BOOT flag table**
+
+       Microsoft only table, will not be supported.
+
+BGRT   Section 5.2.22 (signature == "BGRT")
+
+       **Boot Graphics Resource Table**
+
+       Optional, not currently supported, with no real use-case for an
+       ARM server.
+
+CEDT   Signature Reserved (signature == "CEDT")
+
+       **CXL Early Discovery Table**
+
+       This table allows the OS to discover any CXL Host Bridges and the Host
+       Bridge registers.
+
+CPEP   Section 5.2.18 (signature == "CPEP")
+
+       **Corrected Platform Error Polling table**
+
+       Optional, not currently supported, and not recommended until such
+       time as ARM-compatible hardware is available, and the specification
+       suitably modified.
+
+CSRT   Signature Reserved (signature == "CSRT")
+
+       **Core System Resources Table**
+
+       Optional, not currently supported.
+
+DBG2   Signature Reserved (signature == "DBG2")
+
+       **DeBuG port table 2**
+
+       License has changed and should be usable.  Optional if used instead
+       of earlycon=<device> on the command line.
+
+DBGP   Signature Reserved (signature == "DBGP")
+
+       **DeBuG Port table**
+
+       Microsoft only table, will not be supported.
+
+DSDT   Section 5.2.11.1 (signature == "DSDT")
+
+       **Differentiated System Description Table**
+
+       A DSDT is required; see also SSDT.
+
+       ACPI tables contain only one DSDT but can contain one or more SSDTs,
+       which are optional.  Each SSDT can only add to the ACPI namespace,
+       but cannot modify or replace anything in the DSDT.
+
+DMAR   Signature Reserved (signature == "DMAR")
+
+       **DMA Remapping table**
+
+       x86 only table, will not be supported.
+
+DRTM   Signature Reserved (signature == "DRTM")
+
+       **Dynamic Root of Trust for Measurement table**
+
+       Optional, not currently supported.
+
+ECDT   Section 5.2.16 (signature == "ECDT")
+
+       **Embedded Controller Description Table**
+
+       Optional, not currently supported, but could be used on ARM if and
+       only if one uses the GPE_BIT field to represent an IRQ number, since
+       there are no GPE blocks defined in hardware reduced mode.  This would
+       need to be modified in the ACPI specification.
+
+EINJ   Section 18.6 (signature == "EINJ")
+
+       **Error Injection table**
+
+       This table is very useful for testing platform response to error
+       conditions; it allows one to inject an error into the system as
+       if it had actually occurred.  However, this table should not be
+       shipped with a production system; it should be dynamically loaded
+       and executed with the ACPICA tools only during testing.
+
+ERST   Section 18.5 (signature == "ERST")
+
+       **Error Record Serialization Table**
+
+       On a platform supports RAS, this table must be supplied if it is not
+       UEFI-based; if it is UEFI-based, this table may be supplied. When this
+       table is not present, UEFI run time service will be utilized to save
+       and retrieve hardware error information to and from a persistent store.
+
+ETDT   Signature Reserved (signature == "ETDT")
+
+       **Event Timer Description Table**
+
+       Obsolete table, will not be supported.
+
+FACS   Section 5.2.10 (signature == "FACS")
+
+       **Firmware ACPI Control Structure**
+
+       It is unlikely that this table will be terribly useful.  If it is
+       provided, the Global Lock will NOT be used since it is not part of
+       the hardware reduced profile, and only 64-bit address fields will
+       be considered valid.
+
+FADT   Section 5.2.9 (signature == "FACP")
+
+       **Fixed ACPI Description Table**
+       Required for arm64.
+
+
+       The HW_REDUCED_ACPI flag must be set.  All of the fields that are
+       to be ignored when HW_REDUCED_ACPI is set are expected to be set to
+       zero.
+
+       If an FACS table is provided, the X_FIRMWARE_CTRL field is to be
+       used, not FIRMWARE_CTRL.
+
+       If PSCI is used (as is recommended), make sure that ARM_BOOT_ARCH is
+       filled in properly - that the PSCI_COMPLIANT flag is set and that
+       PSCI_USE_HVC is set or unset as needed (see table 5-37).
+
+       For the DSDT that is also required, the X_DSDT field is to be used,
+       not the DSDT field.
+
+FPDT   Section 5.2.23 (signature == "FPDT")
+
+       **Firmware Performance Data Table**
+
+       Optional, useful for boot performance profiling.
+
+GTDT   Section 5.2.24 (signature == "GTDT")
+
+       **Generic Timer Description Table**
+
+       Required for arm64.
+
+HEST   Section 18.3.2 (signature == "HEST")
+
+       **Hardware Error Source Table**
+
+       ARM-specific error sources have been defined; please use those or the
+       PCI types such as type 6 (AER Root Port), 7 (AER Endpoint), or 8 (AER
+       Bridge), or use type 9 (Generic Hardware Error Source).  Firmware first
+       error handling is possible if and only if Trusted Firmware is being
+       used on arm64.
+
+       Must be supplied if RAS support is provided by the platform.  It
+       is recommended this table be supplied.
+
+HMAT   Section 5.2.28 (signature == "HMAT")
+
+       **Heterogeneous Memory Attribute Table**
+
+       This table describes the memory attributes, such as memory side cache
+       attributes and bandwidth and latency details, related to Memory Proximity
+       Domains. The OS uses this information to optimize the system memory
+       configuration.
+
+HPET   Signature Reserved (signature == "HPET")
+
+       **High Precision Event timer Table**
+
+       x86 only table, will not be supported.
+
+IBFT   Signature Reserved (signature == "IBFT")
+
+       **iSCSI Boot Firmware Table**
+
+       Microsoft defined table, support TBD.
+
+IORT   Signature Reserved (signature == "IORT")
+
+       **Input Output Remapping Table**
+
+       arm64 only table, required in order to describe IO topology, SMMUs,
+       and GIC ITSs, and how those various components are connected together,
+       such as identifying which components are behind which SMMUs/ITSs.
+       This table will only be required on certain SBSA platforms (e.g.,
+       when using GICv3-ITS and an SMMU); on SBSA Level 0 platforms, it
+       remains optional.
+
+IVRS   Signature Reserved (signature == "IVRS")
+
+       **I/O Virtualization Reporting Structure**
+
+       x86_64 (AMD) only table, will not be supported.
+
+LPIT   Signature Reserved (signature == "LPIT")
+
+       **Low Power Idle Table**
+
+       x86 only table as of ACPI 5.1; starting with ACPI 6.0, processor
+       descriptions and power states on ARM platforms should use the DSDT
+       and define processor container devices (_HID ACPI0010, Section 8.4,
+       and more specifically 8.4.3 and 8.4.4).
+
+MADT   Section 5.2.12 (signature == "APIC")
+
+       **Multiple APIC Description Table**
+
+       Required for arm64.  Only the GIC interrupt controller structures
+       should be used (types 0xA - 0xF).
+
+MCFG   Signature Reserved (signature == "MCFG")
+
+       **Memory-mapped ConFiGuration space**
+
+       If the platform supports PCI/PCIe, an MCFG table is required.
+
+MCHI   Signature Reserved (signature == "MCHI")
+
+       **Management Controller Host Interface table**
+
+       Optional, not currently supported.
+
+MPAM   Signature Reserved (signature == "MPAM")
+
+       **Memory Partitioning And Monitoring table**
+
+       This table allows the OS to discover the MPAM controls implemented by
+       the subsystems.
+
+MPST   Section 5.2.21 (signature == "MPST")
+
+       **Memory Power State Table**
+
+       Optional, not currently supported.
+
+MSCT   Section 5.2.19 (signature == "MSCT")
+
+       **Maximum System Characteristic Table**
+
+       Optional, not currently supported.
+
+MSDM   Signature Reserved (signature == "MSDM")
+
+       **Microsoft Data Management table**
+
+       Microsoft only table, will not be supported.
+
+NFIT   Section 5.2.25 (signature == "NFIT")
+
+       **NVDIMM Firmware Interface Table**
+
+       Optional, not currently supported.
+
+OEMx   Signature of "OEMx" only
+
+       **OEM Specific Tables**
+
+       All tables starting with a signature of "OEM" are reserved for OEM
+       use.  Since these are not meant to be of general use but are limited
+       to very specific end users, they are not recommended for use and are
+       not supported by the kernel for arm64.
+
+PCCT   Section 14.1 (signature == "PCCT)
+
+       **Platform Communications Channel Table**
+
+       Recommend for use on arm64; use of PCC is recommended when using CPPC
+       to control performance and power for platform processors.
+
+PDTT   Section 5.2.29 (signature == "PDTT")
+
+       **Platform Debug Trigger Table**
+
+       This table describes PCC channels used to gather debug logs of
+       non-architectural features.
+
+
+PMTT   Section 5.2.21.12 (signature == "PMTT")
+
+       **Platform Memory Topology Table**
+
+       Optional, not currently supported.
+
+PPTT   Section 5.2.30 (signature == "PPTT")
+
+       **Processor Properties Topology Table**
+
+       This table provides the processor and cache topology.
+
+PSDT   Section 5.2.11.3 (signature == "PSDT")
+
+       **Persistent System Description Table**
+
+       Obsolete table, will not be supported.
+
+RAS2   Section 5.2.21 (signature == "RAS2")
+
+       **RAS Features 2 table**
+
+       This table provides interfaces for the RAS capabilities implemented in
+       the platform.
+
+RASF   Section 5.2.20 (signature == "RASF")
+
+       **RAS Feature table**
+
+       Optional, not currently supported.
+
+RSDP   Section 5.2.5 (signature == "RSD PTR")
+
+       **Root System Description PoinTeR**
+
+       Required for arm64.
+
+RSDT   Section 5.2.7 (signature == "RSDT")
+
+       **Root System Description Table**
+
+       Since this table can only provide 32-bit addresses, it is deprecated
+       on arm64, and will not be used.  If provided, it will be ignored.
+
+SBST   Section 5.2.14 (signature == "SBST")
+
+       **Smart Battery Subsystem Table**
+
+       Optional, not currently supported.
+
+SDEI   Signature Reserved (signature == "SDEI")
+
+       **Software Delegated Exception Interface table**
+
+       This table advertises the presence of the SDEI interface.
+
+SLIC   Signature Reserved (signature == "SLIC")
+
+       **Software LIcensing table**
+
+       Microsoft only table, will not be supported.
+
+SLIT   Section 5.2.17 (signature == "SLIT")
+
+       **System Locality distance Information Table**
+
+       Optional in general, but required for NUMA systems.
+
+SPCR   Signature Reserved (signature == "SPCR")
+
+       **Serial Port Console Redirection table**
+
+       Required for arm64.
+
+SPMI   Signature Reserved (signature == "SPMI")
+
+       **Server Platform Management Interface table**
+
+       Optional, not currently supported.
+
+SRAT   Section 5.2.16 (signature == "SRAT")
+
+       **System Resource Affinity Table**
+
+       Optional, but if used, only the GICC Affinity structures are read.
+       To support arm64 NUMA, this table is required.
+
+SSDT   Section 5.2.11.2 (signature == "SSDT")
+
+       **Secondary System Description Table**
+
+       These tables are a continuation of the DSDT; these are recommended
+       for use with devices that can be added to a running system, but can
+       also serve the purpose of dividing up device descriptions into more
+       manageable pieces.
+
+       An SSDT can only ADD to the ACPI namespace.  It cannot modify or
+       replace existing device descriptions already in the namespace.
+
+       These tables are optional, however.  ACPI tables should contain only
+       one DSDT but can contain many SSDTs.
+
+STAO   Signature Reserved (signature == "STAO")
+
+       **_STA Override table**
+
+       Optional, but only necessary in virtualized environments in order to
+       hide devices from guest OSs.
+
+TCPA   Signature Reserved (signature == "TCPA")
+
+       **Trusted Computing Platform Alliance table**
+
+       Optional, not currently supported, and may need changes to fully
+       interoperate with arm64.
+
+TPM2   Signature Reserved (signature == "TPM2")
+
+       **Trusted Platform Module 2 table**
+
+       Optional, not currently supported, and may need changes to fully
+       interoperate with arm64.
+
+UEFI   Signature Reserved (signature == "UEFI")
+
+       **UEFI ACPI data table**
+
+       Optional, not currently supported.  No known use case for arm64,
+       at present.
+
+WAET   Signature Reserved (signature == "WAET")
+
+       **Windows ACPI Emulated devices Table**
+
+       Microsoft only table, will not be supported.
+
+WDAT   Signature Reserved (signature == "WDAT")
+
+       **Watch Dog Action Table**
+
+       Microsoft only table, will not be supported.
+
+WDRT   Signature Reserved (signature == "WDRT")
+
+       **Watch Dog Resource Table**
+
+       Microsoft only table, will not be supported.
+
+WPBT   Signature Reserved (signature == "WPBT")
+
+       **Windows Platform Binary Table**
+
+       Microsoft only table, will not be supported.
+
+XENV   Signature Reserved (signature == "XENV")
+
+       **Xen project table**
+
+       Optional, used only by Xen at present.
+
+XSDT   Section 5.2.8 (signature == "XSDT")
+
+       **eXtended System Description Table**
+
+       Required for arm64.
+====== ========================================================================
+
+ACPI Objects
+------------
+The expectations on individual ACPI objects that are likely to be used are
+shown in the list that follows; any object not explicitly mentioned below
+should be used as needed for a particular platform or particular subsystem,
+such as power management or PCI.
+
+===== ================ ========================================================
+Name   Section         Usage for ARMv8 Linux
+===== ================ ========================================================
+_CCA   6.2.17          This method must be defined for all bus masters
+                       on arm64 - there are no assumptions made about
+                       whether such devices are cache coherent or not.
+                       The _CCA value is inherited by all descendants of
+                       these devices so it does not need to be repeated.
+                       Without _CCA on arm64, the kernel does not know what
+                       to do about setting up DMA for the device.
+
+                       NB: this method provides default cache coherency
+                       attributes; the presence of an SMMU can be used to
+                       modify that, however.  For example, a master could
+                       default to non-coherent, but be made coherent with
+                       the appropriate SMMU configuration (see Table 17 of
+                       the IORT specification, ARM Document DEN 0049B).
+
+_CID   6.1.2           Use as needed, see also _HID.
+
+_CLS   6.1.3           Use as needed, see also _HID.
+
+_CPC   8.4.7.1         Use as needed, power management specific.  CPPC is
+                       recommended on arm64.
+
+_CRS   6.2.2           Required on arm64.
+
+_CSD   8.4.2.2         Use as needed, used only in conjunction with _CST.
+
+_CST   8.4.2.1         Low power idle states (8.4.4) are recommended instead
+                       of C-states.
+
+_DDN   6.1.4           This field can be used for a device name.  However,
+                       it is meant for DOS device names (e.g., COM1), so be
+                       careful of its use across OSes.
+
+_DSD   6.2.5           To be used with caution.  If this object is used, try
+                       to use it within the constraints already defined by the
+                       Device Properties UUID.  Only in rare circumstances
+                       should it be necessary to create a new _DSD UUID.
+
+                       In either case, submit the _DSD definition along with
+                       any driver patches for discussion, especially when
+                       device properties are used.  A driver will not be
+                       considered complete without a corresponding _DSD
+                       description.  Once approved by kernel maintainers,
+                       the UUID or device properties must then be registered
+                       with the UEFI Forum; this may cause some iteration as
+                       more than one OS will be registering entries.
+
+_DSM   9.1.1           Do not use this method.  It is not standardized, the
+                       return values are not well documented, and it is
+                       currently a frequent source of error.
+
+\_GL   5.7.1           This object is not to be used in hardware reduced
+                       mode, and therefore should not be used on arm64.
+
+_GLK   6.5.7           This object requires a global lock be defined; there
+                       is no global lock on arm64 since it runs in hardware
+                       reduced mode.  Hence, do not use this object on arm64.
+
+\_GPE  5.3.1           This namespace is for x86 use only.  Do not use it
+                       on arm64.
+
+_HID   6.1.5           This is the primary object to use in device probing,
+		       though _CID and _CLS may also be used.
+
+_INI   6.5.1           Not required, but can be useful in setting up devices
+                       when UEFI leaves them in a state that may not be what
+                       the driver expects before it starts probing.
+
+_LPI   8.4.4.3         Recommended for use with processor definitions (_HID
+		       ACPI0010) on arm64.  See also _RDI.
+
+_MLS   6.1.7           Highly recommended for use in internationalization.
+
+_OFF   7.2.2           It is recommended to define this method for any device
+                       that can be turned on or off.
+
+_ON    7.2.3           It is recommended to define this method for any device
+                       that can be turned on or off.
+
+\_OS   5.7.3           This method will return "Linux" by default (this is
+                       the value of the macro ACPI_OS_NAME on Linux).  The
+                       command line parameter acpi_os=<string> can be used
+                       to set it to some other value.
+
+_OSC   6.2.11          This method can be a global method in ACPI (i.e.,
+                       \_SB._OSC), or it may be associated with a specific
+                       device (e.g., \_SB.DEV0._OSC), or both.  When used
+                       as a global method, only capabilities published in
+                       the ACPI specification are allowed.  When used as
+                       a device-specific method, the process described for
+                       using _DSD MUST be used to create an _OSC definition;
+                       out-of-process use of _OSC is not allowed.  That is,
+                       submit the device-specific _OSC usage description as
+                       part of the kernel driver submission, get it approved
+                       by the kernel community, then register it with the
+                       UEFI Forum.
+
+\_OSI  5.7.2           Deprecated on ARM64.  As far as ACPI firmware is
+		       concerned, _OSI is not to be used to determine what
+		       sort of system is being used or what functionality
+		       is provided.  The _OSC method is to be used instead.
+
+_PDC   8.4.1           Deprecated, do not use on arm64.
+
+\_PIC  5.8.1           The method should not be used.  On arm64, the only
+                       interrupt model available is GIC.
+
+\_PR   5.3.1           This namespace is for x86 use only on legacy systems.
+                       Do not use it on arm64.
+
+_PRT   6.2.13          Required as part of the definition of all PCI root
+                       devices.
+
+_PRx   7.3.8-11        Use as needed; power management specific.  If _PR0 is
+                       defined, _PR3 must also be defined.
+
+_PSx   7.3.2-5         Use as needed; power management specific.  If _PS0 is
+                       defined, _PS3 must also be defined.  If clocks or
+                       regulators need adjusting to be consistent with power
+                       usage, change them in these methods.
+
+_RDI   8.4.4.4         Recommended for use with processor definitions (_HID
+		       ACPI0010) on arm64.  This should only be used in
+		       conjunction with _LPI.
+
+\_REV  5.7.4           Always returns the latest version of ACPI supported.
+
+\_SB   5.3.1           Required on arm64; all devices must be defined in this
+                       namespace.
+
+_SLI   6.2.15          Use is recommended when SLIT table is in use.
+
+_STA   6.3.7,          It is recommended to define this method for any device
+       7.2.4           that can be turned on or off.  See also the STAO table
+                       that provides overrides to hide devices in virtualized
+                       environments.
+
+_SRS   6.2.16          Use as needed; see also _PRS.
+
+_STR   6.1.10          Recommended for conveying device names to end users;
+                       this is preferred over using _DDN.
+
+_SUB   6.1.9           Use as needed; _HID or _CID are preferred.
+
+_SUN   6.1.11          Use as needed, but recommended.
+
+_SWS   7.4.3           Use as needed; power management specific; this may
+                       require specification changes for use on arm64.
+
+_UID   6.1.12          Recommended for distinguishing devices of the same
+                       class; define it if at all possible.
+===== ================ ========================================================
+
+
+
+
+ACPI Event Model
+----------------
+Do not use GPE block devices; these are not supported in the hardware reduced
+profile used by arm64.  Since there are no GPE blocks defined for use on ARM
+platforms, ACPI events must be signaled differently.
+
+There are two options: GPIO-signaled interrupts (Section 5.6.5), and
+interrupt-signaled events (Section 5.6.9).  Interrupt-signaled events are a
+new feature in the ACPI 6.1 specification.  Either - or both - can be used
+on a given platform, and which to use may be dependent of limitations in any
+given SoC.  If possible, interrupt-signaled events are recommended.
+
+
+ACPI Processor Control
+----------------------
+Section 8 of the ACPI specification changed significantly in version 6.0.
+Processors should now be defined as Device objects with _HID ACPI0007; do
+not use the deprecated Processor statement in ASL.  All multiprocessor systems
+should also define a hierarchy of processors, done with Processor Container
+Devices (see Section 8.4.3.1, _HID ACPI0010); do not use processor aggregator
+devices (Section 8.5) to describe processor topology.  Section 8.4 of the
+specification describes the semantics of these object definitions and how
+they interrelate.
+
+Most importantly, the processor hierarchy defined also defines the low power
+idle states that are available to the platform, along with the rules for
+determining which processors can be turned on or off and the circumstances
+that control that.  Without this information, the processors will run in
+whatever power state they were left in by UEFI.
+
+Note too, that the processor Device objects defined and the entries in the
+MADT for GICs are expected to be in synchronization.  The _UID of the Device
+object must correspond to processor IDs used in the MADT.
+
+It is recommended that CPPC (8.4.5) be used as the primary model for processor
+performance control on arm64.  C-states and P-states may become available at
+some point in the future, but most current design work appears to favor CPPC.
+
+Further, it is essential that the ARMv8 SoC provide a fully functional
+implementation of PSCI; this will be the only mechanism supported by ACPI
+to control CPU power state.  Booting of secondary CPUs using the ACPI
+parking protocol is possible, but discouraged, since only PSCI is supported
+for ARM servers.
+
+
+ACPI System Address Map Interfaces
+----------------------------------
+In Section 15 of the ACPI specification, several methods are mentioned as
+possible mechanisms for conveying memory resource information to the kernel.
+For arm64, we will only support UEFI for booting with ACPI, hence the UEFI
+GetMemoryMap() boot service is the only mechanism that will be used.
+
+
+ACPI Platform Error Interfaces (APEI)
+-------------------------------------
+The APEI tables supported are described above.
+
+APEI requires the equivalent of an SCI and an NMI on ARMv8.  The SCI is used
+to notify the OSPM of errors that have occurred but can be corrected and the
+system can continue correct operation, even if possibly degraded.  The NMI is
+used to indicate fatal errors that cannot be corrected, and require immediate
+attention.
+
+Since there is no direct equivalent of the x86 SCI or NMI, arm64 handles
+these slightly differently.  The SCI is handled as a high priority interrupt;
+given that these are corrected (or correctable) errors being reported, this
+is sufficient.  The NMI is emulated as the highest priority interrupt
+possible.  This implies some caution must be used since there could be
+interrupts at higher privilege levels or even interrupts at the same priority
+as the emulated NMI.  In Linux, this should not be the case but one should
+be aware it could happen.
+
+
+ACPI Objects Not Supported on ARM64
+-----------------------------------
+While this may change in the future, there are several classes of objects
+that can be defined, but are not currently of general interest to ARM servers.
+Some of these objects have x86 equivalents, and may actually make sense in ARM
+servers.  However, there is either no hardware available at present, or there
+may not even be a non-ARM implementation yet.  Hence, they are not currently
+supported.
+
+The following classes of objects are not supported:
+
+       -  Section 9.2: ambient light sensor devices
+
+       -  Section 9.3: battery devices
+
+       -  Section 9.4: lids (e.g., laptop lids)
+
+       -  Section 9.8.2: IDE controllers
+
+       -  Section 9.9: floppy controllers
+
+       -  Section 9.10: GPE block devices
+
+       -  Section 9.15: PC/AT RTC/CMOS devices
+
+       -  Section 9.16: user presence detection devices
+
+       -  Section 9.17: I/O APIC devices; all GICs must be enumerable via MADT
+
+       -  Section 9.18: time and alarm devices (see 9.15)
+
+       -  Section 10: power source and power meter devices
+
+       -  Section 11: thermal management
+
+       -  Section 12: embedded controllers interface
+
+       -  Section 13: SMBus interfaces
+
+
+This also means that there is no support for the following objects:
+
+====   =========================== ====   ==========
+Name   Section                     Name   Section
+====   =========================== ====   ==========
+_ALC   9.3.4                       _FDM   9.10.3
+_ALI   9.3.2                       _FIX   6.2.7
+_ALP   9.3.6                       _GAI   10.4.5
+_ALR   9.3.5                       _GHL   10.4.7
+_ALT   9.3.3                       _GTM   9.9.2.1.1
+_BCT   10.2.2.10                   _LID   9.5.1
+_BDN   6.5.3                       _PAI   10.4.4
+_BIF   10.2.2.1                    _PCL   10.3.2
+_BIX   10.2.2.1                    _PIF   10.3.3
+_BLT   9.2.3                       _PMC   10.4.1
+_BMA   10.2.2.4                    _PMD   10.4.8
+_BMC   10.2.2.12                   _PMM   10.4.3
+_BMD   10.2.2.11                   _PRL   10.3.4
+_BMS   10.2.2.5                    _PSR   10.3.1
+_BST   10.2.2.6                    _PTP   10.4.2
+_BTH   10.2.2.7                    _SBS   10.1.3
+_BTM   10.2.2.9                    _SHL   10.4.6
+_BTP   10.2.2.8                    _STM   9.9.2.1.1
+_DCK   6.5.2                       _UPD   9.16.1
+_EC    12.12                       _UPP   9.16.2
+_FDE   9.10.1                      _WPC   10.5.2
+_FDI   9.10.2                      _WPP   10.5.3
+====   =========================== ====   ==========
diff --git a/Documentation/arch/arm64/amu.rst b/Documentation/arch/arm64/amu.rst
new file mode 100644
index 0000000000000..01f2de2b0450c
--- /dev/null
+++ b/Documentation/arch/arm64/amu.rst
@@ -0,0 +1,119 @@
+.. _amu_index:
+
+=======================================================
+Activity Monitors Unit (AMU) extension in AArch64 Linux
+=======================================================
+
+Author: Ionela Voinescu <ionela.voinescu@arm.com>
+
+Date: 2019-09-10
+
+This document briefly describes the provision of Activity Monitors Unit
+support in AArch64 Linux.
+
+
+Architecture overview
+---------------------
+
+The activity monitors extension is an optional extension introduced by the
+ARMv8.4 CPU architecture.
+
+The activity monitors unit, implemented in each CPU, provides performance
+counters intended for system management use. The AMU extension provides a
+system register interface to the counter registers and also supports an
+optional external memory-mapped interface.
+
+Version 1 of the Activity Monitors architecture implements a counter group
+of four fixed and architecturally defined 64-bit event counters.
+
+  - CPU cycle counter: increments at the frequency of the CPU.
+  - Constant counter: increments at the fixed frequency of the system
+    clock.
+  - Instructions retired: increments with every architecturally executed
+    instruction.
+  - Memory stall cycles: counts instruction dispatch stall cycles caused by
+    misses in the last level cache within the clock domain.
+
+When in WFI or WFE these counters do not increment.
+
+The Activity Monitors architecture provides space for up to 16 architected
+event counters. Future versions of the architecture may use this space to
+implement additional architected event counters.
+
+Additionally, version 1 implements a counter group of up to 16 auxiliary
+64-bit event counters.
+
+On cold reset all counters reset to 0.
+
+
+Basic support
+-------------
+
+The kernel can safely run a mix of CPUs with and without support for the
+activity monitors extension. Therefore, when CONFIG_ARM64_AMU_EXTN is
+selected we unconditionally enable the capability to allow any late CPU
+(secondary or hotplugged) to detect and use the feature.
+
+When the feature is detected on a CPU, we flag the availability of the
+feature but this does not guarantee the correct functionality of the
+counters, only the presence of the extension.
+
+Firmware (code running at higher exception levels, e.g. arm-tf) support is
+needed to:
+
+ - Enable access for lower exception levels (EL2 and EL1) to the AMU
+   registers.
+ - Enable the counters. If not enabled these will read as 0.
+ - Save/restore the counters before/after the CPU is being put/brought up
+   from the 'off' power state.
+
+When using kernels that have this feature enabled but boot with broken
+firmware the user may experience panics or lockups when accessing the
+counter registers. Even if these symptoms are not observed, the values
+returned by the register reads might not correctly reflect reality. Most
+commonly, the counters will read as 0, indicating that they are not
+enabled.
+
+If proper support is not provided in firmware it's best to disable
+CONFIG_ARM64_AMU_EXTN. To be noted that for security reasons, this does not
+bypass the setting of AMUSERENR_EL0 to trap accesses from EL0 (userspace) to
+EL1 (kernel). Therefore, firmware should still ensure accesses to AMU registers
+are not trapped in EL2/EL3.
+
+The fixed counters of AMUv1 are accessible though the following system
+register definitions:
+
+ - SYS_AMEVCNTR0_CORE_EL0
+ - SYS_AMEVCNTR0_CONST_EL0
+ - SYS_AMEVCNTR0_INST_RET_EL0
+ - SYS_AMEVCNTR0_MEM_STALL_EL0
+
+Auxiliary platform specific counters can be accessed using
+SYS_AMEVCNTR1_EL0(n), where n is a value between 0 and 15.
+
+Details can be found in: arch/arm64/include/asm/sysreg.h.
+
+
+Userspace access
+----------------
+
+Currently, access from userspace to the AMU registers is disabled due to:
+
+ - Security reasons: they might expose information about code executed in
+   secure mode.
+ - Purpose: AMU counters are intended for system management use.
+
+Also, the presence of the feature is not visible to userspace.
+
+
+Virtualization
+--------------
+
+Currently, access from userspace (EL0) and kernelspace (EL1) on the KVM
+guest side is disabled due to:
+
+ - Security reasons: they might expose information about code executed
+   by other guests or the host.
+
+Any attempt to access the AMU registers will result in an UNDEFINED
+exception being injected into the guest.
diff --git a/Documentation/arch/arm64/arm-acpi.rst b/Documentation/arch/arm64/arm-acpi.rst
new file mode 100644
index 0000000000000..94274a8d84cf0
--- /dev/null
+++ b/Documentation/arch/arm64/arm-acpi.rst
@@ -0,0 +1,575 @@
+===================
+ACPI on Arm systems
+===================
+
+ACPI can be used for Armv8 and Armv9 systems designed to follow
+the BSA (Arm Base System Architecture) [0] and BBR (Arm
+Base Boot Requirements) [1] specifications.  Both BSA and BBR are publicly
+accessible documents.
+Arm Servers, in addition to being BSA compliant, comply with a set
+of rules defined in SBSA (Server Base System Architecture) [2].
+
+The Arm kernel implements the reduced hardware model of ACPI version
+5.1 or later.  Links to the specification and all external documents
+it refers to are managed by the UEFI Forum.  The specification is
+available at http://www.uefi.org/specifications and documents referenced
+by the specification can be found via http://www.uefi.org/acpi.
+
+If an Arm system does not meet the requirements of the BSA and BBR,
+or cannot be described using the mechanisms defined in the required ACPI
+specifications, then ACPI may not be a good fit for the hardware.
+
+While the documents mentioned above set out the requirements for building
+industry-standard Arm systems, they also apply to more than one operating
+system.  The purpose of this document is to describe the interaction between
+ACPI and Linux only, on an Arm system -- that is, what Linux expects of
+ACPI and what ACPI can expect of Linux.
+
+
+Why ACPI on Arm?
+----------------
+Before examining the details of the interface between ACPI and Linux, it is
+useful to understand why ACPI is being used.  Several technologies already
+exist in Linux for describing non-enumerable hardware, after all.  In this
+section we summarize a blog post [3] from Grant Likely that outlines the
+reasoning behind ACPI on Arm systems.  Actually, we snitch a good portion
+of the summary text almost directly, to be honest.
+
+The short form of the rationale for ACPI on Arm is:
+
+-  ACPI’s byte code (AML) allows the platform to encode hardware behavior,
+   while DT explicitly does not support this.  For hardware vendors, being
+   able to encode behavior is a key tool used in supporting operating
+   system releases on new hardware.
+
+-  ACPI’s OSPM defines a power management model that constrains what the
+   platform is allowed to do into a specific model, while still providing
+   flexibility in hardware design.
+
+-  In the enterprise server environment, ACPI has established bindings (such
+   as for RAS) which are currently used in production systems.  DT does not.
+   Such bindings could be defined in DT at some point, but doing so means Arm
+   and x86 would end up using completely different code paths in both firmware
+   and the kernel.
+
+-  Choosing a single interface to describe the abstraction between a platform
+   and an OS is important.  Hardware vendors would not be required to implement
+   both DT and ACPI if they want to support multiple operating systems.  And,
+   agreeing on a single interface instead of being fragmented into per OS
+   interfaces makes for better interoperability overall.
+
+-  The new ACPI governance process works well and Linux is now at the same
+   table as hardware vendors and other OS vendors.  In fact, there is no
+   longer any reason to feel that ACPI only belongs to Windows or that
+   Linux is in any way secondary to Microsoft in this arena.  The move of
+   ACPI governance into the UEFI forum has significantly opened up the
+   specification development process, and currently, a large portion of the
+   changes being made to ACPI are being driven by Linux.
+
+Key to the use of ACPI is the support model.  For servers in general, the
+responsibility for hardware behaviour cannot solely be the domain of the
+kernel, but rather must be split between the platform and the kernel, in
+order to allow for orderly change over time.  ACPI frees the OS from needing
+to understand all the minute details of the hardware so that the OS doesn’t
+need to be ported to each and every device individually.  It allows the
+hardware vendors to take responsibility for power management behaviour without
+depending on an OS release cycle which is not under their control.
+
+ACPI is also important because hardware and OS vendors have already worked
+out the mechanisms for supporting a general purpose computing ecosystem.  The
+infrastructure is in place, the bindings are in place, and the processes are
+in place.  DT does exactly what Linux needs it to when working with vertically
+integrated devices, but there are no good processes for supporting what the
+server vendors need.  Linux could potentially get there with DT, but doing so
+really just duplicates something that already works.  ACPI already does what
+the hardware vendors need, Microsoft won’t collaborate on DT, and hardware
+vendors would still end up providing two completely separate firmware
+interfaces -- one for Linux and one for Windows.
+
+
+Kernel Compatibility
+--------------------
+One of the primary motivations for ACPI is standardization, and using that
+to provide backward compatibility for Linux kernels.  In the server market,
+software and hardware are often used for long periods.  ACPI allows the
+kernel and firmware to agree on a consistent abstraction that can be
+maintained over time, even as hardware or software change.  As long as the
+abstraction is supported, systems can be updated without necessarily having
+to replace the kernel.
+
+When a Linux driver or subsystem is first implemented using ACPI, it by
+definition ends up requiring a specific version of the ACPI specification
+-- it's baseline.  ACPI firmware must continue to work, even though it may
+not be optimal, with the earliest kernel version that first provides support
+for that baseline version of ACPI.  There may be a need for additional drivers,
+but adding new functionality (e.g., CPU power management) should not break
+older kernel versions.  Further, ACPI firmware must also work with the most
+recent version of the kernel.
+
+
+Relationship with Device Tree
+-----------------------------
+ACPI support in drivers and subsystems for Arm should never be mutually
+exclusive with DT support at compile time.
+
+At boot time the kernel will only use one description method depending on
+parameters passed from the boot loader (including kernel bootargs).
+
+Regardless of whether DT or ACPI is used, the kernel must always be capable
+of booting with either scheme (in kernels with both schemes enabled at compile
+time).
+
+
+Booting using ACPI tables
+-------------------------
+The only defined method for passing ACPI tables to the kernel on Arm
+is via the UEFI system configuration table.  Just so it is explicit, this
+means that ACPI is only supported on platforms that boot via UEFI.
+
+When an Arm system boots, it can either have DT information, ACPI tables,
+or in some very unusual cases, both.  If no command line parameters are used,
+the kernel will try to use DT for device enumeration; if there is no DT
+present, the kernel will try to use ACPI tables, but only if they are present.
+In neither is available, the kernel will not boot.  If acpi=force is used
+on the command line, the kernel will attempt to use ACPI tables first, but
+fall back to DT if there are no ACPI tables present.  The basic idea is that
+the kernel will not fail to boot unless it absolutely has no other choice.
+
+Processing of ACPI tables may be disabled by passing acpi=off on the kernel
+command line; this is the default behavior.
+
+In order for the kernel to load and use ACPI tables, the UEFI implementation
+MUST set the ACPI_20_TABLE_GUID to point to the RSDP table (the table with
+the ACPI signature "RSD PTR ").  If this pointer is incorrect and acpi=force
+is used, the kernel will disable ACPI and try to use DT to boot instead; the
+kernel has, in effect, determined that ACPI tables are not present at that
+point.
+
+If the pointer to the RSDP table is correct, the table will be mapped into
+the kernel by the ACPI core, using the address provided by UEFI.
+
+The ACPI core will then locate and map in all other ACPI tables provided by
+using the addresses in the RSDP table to find the XSDT (eXtended System
+Description Table).  The XSDT in turn provides the addresses to all other
+ACPI tables provided by the system firmware; the ACPI core will then traverse
+this table and map in the tables listed.
+
+The ACPI core will ignore any provided RSDT (Root System Description Table).
+RSDTs have been deprecated and are ignored on arm64 since they only allow
+for 32-bit addresses.
+
+Further, the ACPI core will only use the 64-bit address fields in the FADT
+(Fixed ACPI Description Table).  Any 32-bit address fields in the FADT will
+be ignored on arm64.
+
+Hardware reduced mode (see Section 4.1 of the ACPI 6.1 specification) will
+be enforced by the ACPI core on arm64.  Doing so allows the ACPI core to
+run less complex code since it no longer has to provide support for legacy
+hardware from other architectures.  Any fields that are not to be used for
+hardware reduced mode must be set to zero.
+
+For the ACPI core to operate properly, and in turn provide the information
+the kernel needs to configure devices, it expects to find the following
+tables (all section numbers refer to the ACPI 6.5 specification):
+
+    -  RSDP (Root System Description Pointer), section 5.2.5
+
+    -  XSDT (eXtended System Description Table), section 5.2.8
+
+    -  FADT (Fixed ACPI Description Table), section 5.2.9
+
+    -  DSDT (Differentiated System Description Table), section
+       5.2.11.1
+
+    -  MADT (Multiple APIC Description Table), section 5.2.12
+
+    -  GTDT (Generic Timer Description Table), section 5.2.24
+
+    -  PPTT (Processor Properties Topology Table), section 5.2.30
+
+    -  DBG2 (DeBuG port table 2), section 5.2.6, specifically Table 5-6.
+
+    -  APMT (Arm Performance Monitoring unit Table), section 5.2.6, specifically Table 5-6.
+
+    -  AGDI (Arm Generic diagnostic Dump and Reset Device Interface Table), section 5.2.6, specifically Table 5-6.
+
+    -  If PCI is supported, the MCFG (Memory mapped ConFiGuration
+       Table), section 5.2.6, specifically Table 5-6.
+
+    -  If booting without a console=<device> kernel parameter is
+       supported, the SPCR (Serial Port Console Redirection table),
+       section 5.2.6, specifically Table 5-6.
+
+    -  If necessary to describe the I/O topology, SMMUs and GIC ITSs,
+       the IORT (Input Output Remapping Table, section 5.2.6, specifically
+       Table 5-6).
+
+    -  If NUMA is supported, the following tables are required:
+
+       - SRAT (System Resource Affinity Table), section 5.2.16
+
+       - SLIT (System Locality distance Information Table), section 5.2.17
+
+    -  If NUMA is supported, and the system contains heterogeneous memory,
+       the HMAT (Heterogeneous Memory Attribute Table), section 5.2.28.
+
+    -  If the ACPI Platform Error Interfaces are required, the following
+       tables are conditionally required:
+
+       - BERT (Boot Error Record Table, section 18.3.1)
+
+       - EINJ (Error INJection table, section 18.6.1)
+
+       - ERST (Error Record Serialization Table, section 18.5)
+
+       - HEST (Hardware Error Source Table, section 18.3.2)
+
+       - SDEI (Software Delegated Exception Interface table, section 5.2.6,
+         specifically Table 5-6)
+
+       - AEST (Arm Error Source Table, section 5.2.6,
+         specifically Table 5-6)
+
+       - RAS2 (ACPI RAS2 feature table, section 5.2.21)
+
+    -  If the system contains controllers using PCC channel, the
+       PCCT (Platform Communications Channel Table), section 14.1
+
+    -  If the system contains a controller to capture board-level system state,
+       and communicates with the host via PCC, the PDTT (Platform Debug Trigger
+       Table), section 5.2.29.
+
+    -  If NVDIMM is supported, the NFIT (NVDIMM Firmware Interface Table), section 5.2.26
+
+    -  If video framebuffer is present, the BGRT (Boot Graphics Resource Table), section 5.2.23
+
+    -  If IPMI is implemented, the SPMI (Server Platform Management Interface),
+       section 5.2.6, specifically Table 5-6.
+
+    -  If the system contains a CXL Host Bridge, the CEDT (CXL Early Discovery
+       Table), section 5.2.6, specifically Table 5-6.
+
+    -  If the system supports MPAM, the MPAM (Memory Partitioning And Monitoring table), section 5.2.6,
+       specifically Table 5-6.
+
+    -  If the system lacks persistent storage, the IBFT (ISCSI Boot Firmware
+       Table), section 5.2.6, specifically Table 5-6.
+
+
+If the above tables are not all present, the kernel may or may not be
+able to boot properly since it may not be able to configure all of the
+devices available.  This list of tables is not meant to be all inclusive;
+in some environments other tables may be needed (e.g., any of the APEI
+tables from section 18) to support specific functionality.
+
+
+ACPI Detection
+--------------
+Drivers should determine their probe() type by checking for a null
+value for ACPI_HANDLE, or checking .of_node, or other information in
+the device structure.  This is detailed further in the "Driver
+Recommendations" section.
+
+In non-driver code, if the presence of ACPI needs to be detected at
+run time, then check the value of acpi_disabled. If CONFIG_ACPI is not
+set, acpi_disabled will always be 1.
+
+
+Device Enumeration
+------------------
+Device descriptions in ACPI should use standard recognized ACPI interfaces.
+These may contain less information than is typically provided via a Device
+Tree description for the same device.  This is also one of the reasons that
+ACPI can be useful -- the driver takes into account that it may have less
+detailed information about the device and uses sensible defaults instead.
+If done properly in the driver, the hardware can change and improve over
+time without the driver having to change at all.
+
+Clocks provide an excellent example.  In DT, clocks need to be specified
+and the drivers need to take them into account.  In ACPI, the assumption
+is that UEFI will leave the device in a reasonable default state, including
+any clock settings.  If for some reason the driver needs to change a clock
+value, this can be done in an ACPI method; all the driver needs to do is
+invoke the method and not concern itself with what the method needs to do
+to change the clock.  Changing the hardware can then take place over time
+by changing what the ACPI method does, and not the driver.
+
+In DT, the parameters needed by the driver to set up clocks as in the example
+above are known as "bindings"; in ACPI, these are known as "Device Properties"
+and provided to a driver via the _DSD object.
+
+ACPI tables are described with a formal language called ASL, the ACPI
+Source Language (section 19 of the specification).  This means that there
+are always multiple ways to describe the same thing -- including device
+properties.  For example, device properties could use an ASL construct
+that looks like this: Name(KEY0, "value0").  An ACPI device driver would
+then retrieve the value of the property by evaluating the KEY0 object.
+However, using Name() this way has multiple problems: (1) ACPI limits
+names ("KEY0") to four characters unlike DT; (2) there is no industry
+wide registry that maintains a list of names, minimizing re-use; (3)
+there is also no registry for the definition of property values ("value0"),
+again making re-use difficult; and (4) how does one maintain backward
+compatibility as new hardware comes out?  The _DSD method was created
+to solve precisely these sorts of problems; Linux drivers should ALWAYS
+use the _DSD method for device properties and nothing else.
+
+The _DSM object (ACPI Section 9.14.1) could also be used for conveying
+device properties to a driver.  Linux drivers should only expect it to
+be used if _DSD cannot represent the data required, and there is no way
+to create a new UUID for the _DSD object.  Note that there is even less
+regulation of the use of _DSM than there is of _DSD.  Drivers that depend
+on the contents of _DSM objects will be more difficult to maintain over
+time because of this; as of this writing, the use of _DSM is the cause
+of quite a few firmware problems and is not recommended.
+
+Drivers should look for device properties in the _DSD object ONLY; the _DSD
+object is described in the ACPI specification section 6.2.5, but this only
+describes how to define the structure of an object returned via _DSD, and
+how specific data structures are defined by specific UUIDs.  Linux should
+only use the _DSD Device Properties UUID [4]:
+
+   - UUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301
+
+Common device properties can be registered by creating a pull request to [4] so
+that they may be used across all operating systems supporting ACPI.
+Device properties that have not been registered with the UEFI Forum can be used
+but not as "uefi-" common properties.
+
+Before creating new device properties, check to be sure that they have not
+been defined before and either registered in the Linux kernel documentation
+as DT bindings, or the UEFI Forum as device properties.  While we do not want
+to simply move all DT bindings into ACPI device properties, we can learn from
+what has been previously defined.
+
+If it is necessary to define a new device property, or if it makes sense to
+synthesize the definition of a binding so it can be used in any firmware,
+both DT bindings and ACPI device properties for device drivers have review
+processes.  Use them both.  When the driver itself is submitted for review
+to the Linux mailing lists, the device property definitions needed must be
+submitted at the same time.  A driver that supports ACPI and uses device
+properties will not be considered complete without their definitions.  Once
+the device property has been accepted by the Linux community, it must be
+registered with the UEFI Forum [4], which will review it again for consistency
+within the registry.  This may require iteration.  The UEFI Forum, though,
+will always be the canonical site for device property definitions.
+
+It may make sense to provide notice to the UEFI Forum that there is the
+intent to register a previously unused device property name as a means of
+reserving the name for later use.  Other operating system vendors will
+also be submitting registration requests and this may help smooth the
+process.
+
+Once registration and review have been completed, the kernel provides an
+interface for looking up device properties in a manner independent of
+whether DT or ACPI is being used.  This API should be used [5]; it can
+eliminate some duplication of code paths in driver probing functions and
+discourage divergence between DT bindings and ACPI device properties.
+
+
+Programmable Power Control Resources
+------------------------------------
+Programmable power control resources include such resources as voltage/current
+providers (regulators) and clock sources.
+
+With ACPI, the kernel clock and regulator framework is not expected to be used
+at all.
+
+The kernel assumes that power control of these resources is represented with
+Power Resource Objects (ACPI section 7.1).  The ACPI core will then handle
+correctly enabling and disabling resources as they are needed.  In order to
+get that to work, ACPI assumes each device has defined D-states and that these
+can be controlled through the optional ACPI methods _PS0, _PS1, _PS2, and _PS3;
+in ACPI, _PS0 is the method to invoke to turn a device full on, and _PS3 is for
+turning a device full off.
+
+There are two options for using those Power Resources.  They can:
+
+   -  be managed in a _PSx method which gets called on entry to power
+      state Dx.
+
+   -  be declared separately as power resources with their own _ON and _OFF
+      methods.  They are then tied back to D-states for a particular device
+      via _PRx which specifies which power resources a device needs to be on
+      while in Dx.  Kernel then tracks number of devices using a power resource
+      and calls _ON/_OFF as needed.
+
+The kernel ACPI code will also assume that the _PSx methods follow the normal
+ACPI rules for such methods:
+
+   -  If either _PS0 or _PS3 is implemented, then the other method must also
+      be implemented.
+
+   -  If a device requires usage or setup of a power resource when on, the ASL
+      should organize that it is allocated/enabled using the _PS0 method.
+
+   -  Resources allocated or enabled in the _PS0 method should be disabled
+      or de-allocated in the _PS3 method.
+
+   -  Firmware will leave the resources in a reasonable state before handing
+      over control to the kernel.
+
+Such code in _PSx methods will of course be very platform specific.  But,
+this allows the driver to abstract out the interface for operating the device
+and avoid having to read special non-standard values from ACPI tables. Further,
+abstracting the use of these resources allows the hardware to change over time
+without requiring updates to the driver.
+
+
+Clocks
+------
+ACPI makes the assumption that clocks are initialized by the firmware --
+UEFI, in this case -- to some working value before control is handed over
+to the kernel.  This has implications for devices such as UARTs, or SoC-driven
+LCD displays, for example.
+
+When the kernel boots, the clocks are assumed to be set to reasonable
+working values.  If for some reason the frequency needs to change -- e.g.,
+throttling for power management -- the device driver should expect that
+process to be abstracted out into some ACPI method that can be invoked
+(please see the ACPI specification for further recommendations on standard
+methods to be expected).  The only exceptions to this are CPU clocks where
+CPPC provides a much richer interface than ACPI methods.  If the clocks
+are not set, there is no direct way for Linux to control them.
+
+If an SoC vendor wants to provide fine-grained control of the system clocks,
+they could do so by providing ACPI methods that could be invoked by Linux
+drivers.  However, this is NOT recommended and Linux drivers should NOT use
+such methods, even if they are provided.  Such methods are not currently
+standardized in the ACPI specification, and using them could tie a kernel
+to a very specific SoC, or tie an SoC to a very specific version of the
+kernel, both of which we are trying to avoid.
+
+
+Driver Recommendations
+----------------------
+DO NOT remove any DT handling when adding ACPI support for a driver.  The
+same device may be used on many different systems.
+
+DO try to structure the driver so that it is data-driven.  That is, set up
+a struct containing internal per-device state based on defaults and whatever
+else must be discovered by the driver probe function.  Then, have the rest
+of the driver operate off of the contents of that struct.  Doing so should
+allow most divergence between ACPI and DT functionality to be kept local to
+the probe function instead of being scattered throughout the driver.  For
+example::
+
+  static int device_probe_dt(struct platform_device *pdev)
+  {
+         /* DT specific functionality */
+         ...
+  }
+
+  static int device_probe_acpi(struct platform_device *pdev)
+  {
+         /* ACPI specific functionality */
+         ...
+  }
+
+  static int device_probe(struct platform_device *pdev)
+  {
+         ...
+         struct device_node node = pdev->dev.of_node;
+         ...
+
+         if (node)
+                 ret = device_probe_dt(pdev);
+         else if (ACPI_HANDLE(&pdev->dev))
+                 ret = device_probe_acpi(pdev);
+         else
+                 /* other initialization */
+                 ...
+         /* Continue with any generic probe operations */
+         ...
+  }
+
+DO keep the MODULE_DEVICE_TABLE entries together in the driver to make it
+clear the different names the driver is probed for, both from DT and from
+ACPI::
+
+  static struct of_device_id virtio_mmio_match[] = {
+          { .compatible = "virtio,mmio", },
+          { }
+  };
+  MODULE_DEVICE_TABLE(of, virtio_mmio_match);
+
+  static const struct acpi_device_id virtio_mmio_acpi_match[] = {
+          { "LNRO0005", },
+          { }
+  };
+  MODULE_DEVICE_TABLE(acpi, virtio_mmio_acpi_match);
+
+
+ASWG
+----
+The ACPI specification changes regularly.  During the year 2014, for instance,
+version 5.1 was released and version 6.0 substantially completed, with most of
+the changes being driven by Arm-specific requirements.  Proposed changes are
+presented and discussed in the ASWG (ACPI Specification Working Group) which
+is a part of the UEFI Forum.  The current version of the ACPI specification
+is 6.5 release in August 2022.
+
+Participation in this group is open to all UEFI members.  Please see
+http://www.uefi.org/workinggroup for details on group membership.
+
+It is the intent of the Arm ACPI kernel code to follow the ACPI specification
+as closely as possible, and to only implement functionality that complies with
+the released standards from UEFI ASWG.  As a practical matter, there will be
+vendors that provide bad ACPI tables or violate the standards in some way.
+If this is because of errors, quirks and fix-ups may be necessary, but will
+be avoided if possible.  If there are features missing from ACPI that preclude
+it from being used on a platform, ECRs (Engineering Change Requests) should be
+submitted to ASWG and go through the normal approval process; for those that
+are not UEFI members, many other members of the Linux community are and would
+likely be willing to assist in submitting ECRs.
+
+
+Linux Code
+----------
+Individual items specific to Linux on Arm, contained in the Linux
+source code, are in the list that follows:
+
+ACPI_OS_NAME
+                       This macro defines the string to be returned when
+                       an ACPI method invokes the _OS method.  On Arm
+                       systems, this macro will be "Linux" by default.
+                       The command line parameter acpi_os=<string>
+                       can be used to set it to some other value.  The
+                       default value for other architectures is "Microsoft
+                       Windows NT", for example.
+
+ACPI Objects
+------------
+Detailed expectations for ACPI tables and object are listed in the file
+Documentation/arch/arm64/acpi_object_usage.rst.
+
+
+References
+----------
+[0] https://developer.arm.com/documentation/den0094/latest
+    document Arm-DEN-0094: "Arm Base System Architecture", version 1.0C, dated 6 Oct 2022
+
+[1] https://developer.arm.com/documentation/den0044/latest
+    Document Arm-DEN-0044: "Arm Base Boot Requirements", version 2.0G, dated 15 Apr 2022
+
+[2] https://developer.arm.com/documentation/den0029/latest
+    Document Arm-DEN-0029: "Arm Server Base System Architecture", version 7.1, dated 06 Oct 2022
+
+[3] http://www.secretlab.ca/archives/151,
+    10 Jan 2015, Copyright (c) 2015,
+    Linaro Ltd., written by Grant Likely.
+
+[4] _DSD (Device Specific Data) Implementation Guide
+    https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.pdf
+
+[5] Kernel code for the unified device
+    property interface can be found in
+    include/linux/property.h and drivers/base/property.c.
+
+
+Authors
+-------
+- Al Stone <al.stone@linaro.org>
+- Graeme Gregory <graeme.gregory@linaro.org>
+- Hanjun Guo <hanjun.guo@linaro.org>
+
+- Grant Likely <grant.likely@linaro.org>, for the "Why ACPI on ARM?" section
diff --git a/Documentation/arch/arm64/asymmetric-32bit.rst b/Documentation/arch/arm64/asymmetric-32bit.rst
new file mode 100644
index 0000000000000..64a0b505da7d8
--- /dev/null
+++ b/Documentation/arch/arm64/asymmetric-32bit.rst
@@ -0,0 +1,155 @@
+======================
+Asymmetric 32-bit SoCs
+======================
+
+Author: Will Deacon <will@kernel.org>
+
+This document describes the impact of asymmetric 32-bit SoCs on the
+execution of 32-bit (``AArch32``) applications.
+
+Date: 2021-05-17
+
+Introduction
+============
+
+Some Armv9 SoCs suffer from a big.LITTLE misfeature where only a subset
+of the CPUs are capable of executing 32-bit user applications. On such
+a system, Linux by default treats the asymmetry as a "mismatch" and
+disables support for both the ``PER_LINUX32`` personality and
+``execve(2)`` of 32-bit ELF binaries, with the latter returning
+``-ENOEXEC``. If the mismatch is detected during late onlining of a
+64-bit-only CPU, then the onlining operation fails and the new CPU is
+unavailable for scheduling.
+
+Surprisingly, these SoCs have been produced with the intention of
+running legacy 32-bit binaries. Unsurprisingly, that doesn't work very
+well with the default behaviour of Linux.
+
+It seems inevitable that future SoCs will drop 32-bit support
+altogether, so if you're stuck in the unenviable position of needing to
+run 32-bit code on one of these transitionary platforms then you would
+be wise to consider alternatives such as recompilation, emulation or
+retirement. If neither of those options are practical, then read on.
+
+Enabling kernel support
+=======================
+
+Since the kernel support is not completely transparent to userspace,
+allowing 32-bit tasks to run on an asymmetric 32-bit system requires an
+explicit "opt-in" and can be enabled by passing the
+``allow_mismatched_32bit_el0`` parameter on the kernel command-line.
+
+For the remainder of this document we will refer to an *asymmetric
+system* to mean an asymmetric 32-bit SoC running Linux with this kernel
+command-line option enabled.
+
+Userspace impact
+================
+
+32-bit tasks running on an asymmetric system behave in mostly the same
+way as on a homogeneous system, with a few key differences relating to
+CPU affinity.
+
+sysfs
+-----
+
+The subset of CPUs capable of running 32-bit tasks is described in
+``/sys/devices/system/cpu/aarch32_el0`` and is documented further in
+``Documentation/ABI/testing/sysfs-devices-system-cpu``.
+
+**Note:** CPUs are advertised by this file as they are detected and so
+late-onlining of 32-bit-capable CPUs can result in the file contents
+being modified by the kernel at runtime. Once advertised, CPUs are never
+removed from the file.
+
+``execve(2)``
+-------------
+
+On a homogeneous system, the CPU affinity of a task is preserved across
+``execve(2)``. This is not always possible on an asymmetric system,
+specifically when the new program being executed is 32-bit yet the
+affinity mask contains 64-bit-only CPUs. In this situation, the kernel
+determines the new affinity mask as follows:
+
+  1. If the 32-bit-capable subset of the affinity mask is not empty,
+     then the affinity is restricted to that subset and the old affinity
+     mask is saved. This saved mask is inherited over ``fork(2)`` and
+     preserved across ``execve(2)`` of 32-bit programs.
+
+     **Note:** This step does not apply to ``SCHED_DEADLINE`` tasks.
+     See `SCHED_DEADLINE`_.
+
+  2. Otherwise, the cpuset hierarchy of the task is walked until an
+     ancestor is found containing at least one 32-bit-capable CPU. The
+     affinity of the task is then changed to match the 32-bit-capable
+     subset of the cpuset determined by the walk.
+
+  3. On failure (i.e. out of memory), the affinity is changed to the set
+     of all 32-bit-capable CPUs of which the kernel is aware.
+
+A subsequent ``execve(2)`` of a 64-bit program by the 32-bit task will
+invalidate the affinity mask saved in (1) and attempt to restore the CPU
+affinity of the task using the saved mask if it was previously valid.
+This restoration may fail due to intervening changes to the deadline
+policy or cpuset hierarchy, in which case the ``execve(2)`` continues
+with the affinity unchanged.
+
+Calls to ``sched_setaffinity(2)`` for a 32-bit task will consider only
+the 32-bit-capable CPUs of the requested affinity mask. On success, the
+affinity for the task is updated and any saved mask from a prior
+``execve(2)`` is invalidated.
+
+``SCHED_DEADLINE``
+------------------
+
+Explicit admission of a 32-bit deadline task to the default root domain
+(e.g. by calling ``sched_setattr(2)``) is rejected on an asymmetric
+32-bit system unless admission control is disabled by writing -1 to
+``/proc/sys/kernel/sched_rt_runtime_us``.
+
+``execve(2)`` of a 32-bit program from a 64-bit deadline task will
+return ``-ENOEXEC`` if the root domain for the task contains any
+64-bit-only CPUs and admission control is enabled. Concurrent offlining
+of 32-bit-capable CPUs may still necessitate the procedure described in
+`execve(2)`_, in which case step (1) is skipped and a warning is
+emitted on the console.
+
+**Note:** It is recommended that a set of 32-bit-capable CPUs are placed
+into a separate root domain if ``SCHED_DEADLINE`` is to be used with
+32-bit tasks on an asymmetric system. Failure to do so is likely to
+result in missed deadlines.
+
+Cpusets
+-------
+
+The affinity of a 32-bit task on an asymmetric system may include CPUs
+that are not explicitly allowed by the cpuset to which it is attached.
+This can occur as a result of the following two situations:
+
+  - A 64-bit task attached to a cpuset which allows only 64-bit CPUs
+    executes a 32-bit program.
+
+  - All of the 32-bit-capable CPUs allowed by a cpuset containing a
+    32-bit task are offlined.
+
+In both of these cases, the new affinity is calculated according to step
+(2) of the process described in `execve(2)`_ and the cpuset hierarchy is
+unchanged irrespective of the cgroup version.
+
+CPU hotplug
+-----------
+
+On an asymmetric system, the first detected 32-bit-capable CPU is
+prevented from being offlined by userspace and any such attempt will
+return ``-EPERM``. Note that suspend is still permitted even if the
+primary CPU (i.e. CPU 0) is 64-bit-only.
+
+KVM
+---
+
+Although KVM will not advertise 32-bit EL0 support to any vCPUs on an
+asymmetric system, a broken guest at EL1 could still attempt to execute
+32-bit code at EL0. In this case, an exit from a vCPU thread in 32-bit
+mode will return to host userspace with an ``exit_reason`` of
+``KVM_EXIT_FAIL_ENTRY`` and will remain non-runnable until successfully
+re-initialised by a subsequent ``KVM_ARM_VCPU_INIT`` operation.
diff --git a/Documentation/arch/arm64/booting.rst b/Documentation/arch/arm64/booting.rst
new file mode 100644
index 0000000000000..b57776a68f156
--- /dev/null
+++ b/Documentation/arch/arm64/booting.rst
@@ -0,0 +1,463 @@
+=====================
+Booting AArch64 Linux
+=====================
+
+Author: Will Deacon <will.deacon@arm.com>
+
+Date  : 07 September 2012
+
+This document is based on the ARM booting document by Russell King and
+is relevant to all public releases of the AArch64 Linux kernel.
+
+The AArch64 exception model is made up of a number of exception levels
+(EL0 - EL3), with EL0, EL1 and EL2 having a secure and a non-secure
+counterpart.  EL2 is the hypervisor level, EL3 is the highest priority
+level and exists only in secure mode. Both are architecturally optional.
+
+For the purposes of this document, we will use the term `boot loader`
+simply to define all software that executes on the CPU(s) before control
+is passed to the Linux kernel.  This may include secure monitor and
+hypervisor code, or it may just be a handful of instructions for
+preparing a minimal boot environment.
+
+Essentially, the boot loader should provide (as a minimum) the
+following:
+
+1. Setup and initialise the RAM
+2. Setup the device tree
+3. Decompress the kernel image
+4. Call the kernel image
+
+
+1. Setup and initialise RAM
+---------------------------
+
+Requirement: MANDATORY
+
+The boot loader is expected to find and initialise all RAM that the
+kernel will use for volatile data storage in the system.  It performs
+this in a machine dependent manner.  (It may use internal algorithms
+to automatically locate and size all RAM, or it may use knowledge of
+the RAM in the machine, or any other method the boot loader designer
+sees fit.)
+
+
+2. Setup the device tree
+-------------------------
+
+Requirement: MANDATORY
+
+The device tree blob (dtb) must be placed on an 8-byte boundary and must
+not exceed 2 megabytes in size. Since the dtb will be mapped cacheable
+using blocks of up to 2 megabytes in size, it must not be placed within
+any 2M region which must be mapped with any specific attributes.
+
+NOTE: versions prior to v4.2 also require that the DTB be placed within
+the 512 MB region starting at text_offset bytes below the kernel Image.
+
+3. Decompress the kernel image
+------------------------------
+
+Requirement: OPTIONAL
+
+The AArch64 kernel does not currently provide a decompressor and
+therefore requires decompression (gzip etc.) to be performed by the boot
+loader if a compressed Image target (e.g. Image.gz) is used.  For
+bootloaders that do not implement this requirement, the uncompressed
+Image target is available instead.
+
+
+4. Call the kernel image
+------------------------
+
+Requirement: MANDATORY
+
+The decompressed kernel image contains a 64-byte header as follows::
+
+  u32 code0;			/* Executable code */
+  u32 code1;			/* Executable code */
+  u64 text_offset;		/* Image load offset, little endian */
+  u64 image_size;		/* Effective Image size, little endian */
+  u64 flags;			/* kernel flags, little endian */
+  u64 res2	= 0;		/* reserved */
+  u64 res3	= 0;		/* reserved */
+  u64 res4	= 0;		/* reserved */
+  u32 magic	= 0x644d5241;	/* Magic number, little endian, "ARM\x64" */
+  u32 res5;			/* reserved (used for PE COFF offset) */
+
+
+Header notes:
+
+- As of v3.17, all fields are little endian unless stated otherwise.
+
+- code0/code1 are responsible for branching to stext.
+
+- when booting through EFI, code0/code1 are initially skipped.
+  res5 is an offset to the PE header and the PE header has the EFI
+  entry point (efi_stub_entry).  When the stub has done its work, it
+  jumps to code0 to resume the normal boot process.
+
+- Prior to v3.17, the endianness of text_offset was not specified.  In
+  these cases image_size is zero and text_offset is 0x80000 in the
+  endianness of the kernel.  Where image_size is non-zero image_size is
+  little-endian and must be respected.  Where image_size is zero,
+  text_offset can be assumed to be 0x80000.
+
+- The flags field (introduced in v3.17) is a little-endian 64-bit field
+  composed as follows:
+
+  ============= ===============================================================
+  Bit 0		Kernel endianness.  1 if BE, 0 if LE.
+  Bit 1-2	Kernel Page size.
+
+			* 0 - Unspecified.
+			* 1 - 4K
+			* 2 - 16K
+			* 3 - 64K
+  Bit 3		Kernel physical placement
+
+			0
+			  2MB aligned base should be as close as possible
+			  to the base of DRAM, since memory below it is not
+			  accessible via the linear mapping
+			1
+			  2MB aligned base such that all image_size bytes
+			  counted from the start of the image are within
+			  the 48-bit addressable range of physical memory
+  Bits 4-63	Reserved.
+  ============= ===============================================================
+
+- When image_size is zero, a bootloader should attempt to keep as much
+  memory as possible free for use by the kernel immediately after the
+  end of the kernel image. The amount of space required will vary
+  depending on selected features, and is effectively unbound.
+
+The Image must be placed text_offset bytes from a 2MB aligned base
+address anywhere in usable system RAM and called there. The region
+between the 2 MB aligned base address and the start of the image has no
+special significance to the kernel, and may be used for other purposes.
+At least image_size bytes from the start of the image must be free for
+use by the kernel.
+NOTE: versions prior to v4.6 cannot make use of memory below the
+physical offset of the Image so it is recommended that the Image be
+placed as close as possible to the start of system RAM.
+
+If an initrd/initramfs is passed to the kernel at boot, it must reside
+entirely within a 1 GB aligned physical memory window of up to 32 GB in
+size that fully covers the kernel Image as well.
+
+Any memory described to the kernel (even that below the start of the
+image) which is not marked as reserved from the kernel (e.g., with a
+memreserve region in the device tree) will be considered as available to
+the kernel.
+
+Before jumping into the kernel, the following conditions must be met:
+
+- Quiesce all DMA capable devices so that memory does not get
+  corrupted by bogus network packets or disk data.  This will save
+  you many hours of debug.
+
+- Primary CPU general-purpose register settings:
+
+    - x0 = physical address of device tree blob (dtb) in system RAM.
+    - x1 = 0 (reserved for future use)
+    - x2 = 0 (reserved for future use)
+    - x3 = 0 (reserved for future use)
+
+- CPU mode
+
+  All forms of interrupts must be masked in PSTATE.DAIF (Debug, SError,
+  IRQ and FIQ).
+  The CPU must be in non-secure state, either in EL2 (RECOMMENDED in order
+  to have access to the virtualisation extensions), or in EL1.
+
+- Caches, MMUs
+
+  The MMU must be off.
+
+  The instruction cache may be on or off, and must not hold any stale
+  entries corresponding to the loaded kernel image.
+
+  The address range corresponding to the loaded kernel image must be
+  cleaned to the PoC. In the presence of a system cache or other
+  coherent masters with caches enabled, this will typically require
+  cache maintenance by VA rather than set/way operations.
+  System caches which respect the architected cache maintenance by VA
+  operations must be configured and may be enabled.
+  System caches which do not respect architected cache maintenance by VA
+  operations (not recommended) must be configured and disabled.
+
+- Architected timers
+
+  CNTFRQ must be programmed with the timer frequency and CNTVOFF must
+  be programmed with a consistent value on all CPUs.  If entering the
+  kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0) set where
+  available.
+
+- Coherency
+
+  All CPUs to be booted by the kernel must be part of the same coherency
+  domain on entry to the kernel.  This may require IMPLEMENTATION DEFINED
+  initialisation to enable the receiving of maintenance operations on
+  each CPU.
+
+- System registers
+
+  All writable architected system registers at or below the exception
+  level where the kernel image will be entered must be initialised by
+  software at a higher exception level to prevent execution in an UNKNOWN
+  state.
+
+  For all systems:
+  - If EL3 is present:
+
+    - SCR_EL3.FIQ must have the same value across all CPUs the kernel is
+      executing on.
+    - The value of SCR_EL3.FIQ must be the same as the one present at boot
+      time whenever the kernel is executing.
+
+  - If EL3 is present and the kernel is entered at EL2:
+
+    - SCR_EL3.HCE (bit 8) must be initialised to 0b1.
+
+  For systems with a GICv3 interrupt controller to be used in v3 mode:
+  - If EL3 is present:
+
+      - ICC_SRE_EL3.Enable (bit 3) must be initialised to 0b1.
+      - ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
+      - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
+        all CPUs the kernel is executing on, and must stay constant
+        for the lifetime of the kernel.
+
+  - If the kernel is entered at EL1:
+
+      - ICC.SRE_EL2.Enable (bit 3) must be initialised to 0b1
+      - ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b1.
+
+  - The DT or ACPI tables must describe a GICv3 interrupt controller.
+
+  For systems with a GICv3 interrupt controller to be used in
+  compatibility (v2) mode:
+
+  - If EL3 is present:
+
+      ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b0.
+
+  - If the kernel is entered at EL1:
+
+      ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b0.
+
+  - The DT or ACPI tables must describe a GICv2 interrupt controller.
+
+  For CPUs with pointer authentication functionality:
+
+  - If EL3 is present:
+
+    - SCR_EL3.APK (bit 16) must be initialised to 0b1
+    - SCR_EL3.API (bit 17) must be initialised to 0b1
+
+  - If the kernel is entered at EL1:
+
+    - HCR_EL2.APK (bit 40) must be initialised to 0b1
+    - HCR_EL2.API (bit 41) must be initialised to 0b1
+
+  For CPUs with Activity Monitors Unit v1 (AMUv1) extension present:
+
+  - If EL3 is present:
+
+    - CPTR_EL3.TAM (bit 30) must be initialised to 0b0
+    - CPTR_EL2.TAM (bit 30) must be initialised to 0b0
+    - AMCNTENSET0_EL0 must be initialised to 0b1111
+    - AMCNTENSET1_EL0 must be initialised to a platform specific value
+      having 0b1 set for the corresponding bit for each of the auxiliary
+      counters present.
+
+  - If the kernel is entered at EL1:
+
+    - AMCNTENSET0_EL0 must be initialised to 0b1111
+    - AMCNTENSET1_EL0 must be initialised to a platform specific value
+      having 0b1 set for the corresponding bit for each of the auxiliary
+      counters present.
+
+  For CPUs with the Fine Grained Traps (FEAT_FGT) extension present:
+
+  - If EL3 is present and the kernel is entered at EL2:
+
+    - SCR_EL3.FGTEn (bit 27) must be initialised to 0b1.
+
+  For CPUs with support for HCRX_EL2 (FEAT_HCX) present:
+
+  - If EL3 is present and the kernel is entered at EL2:
+
+    - SCR_EL3.HXEn (bit 38) must be initialised to 0b1.
+
+  For CPUs with Advanced SIMD and floating point support:
+
+  - If EL3 is present:
+
+    - CPTR_EL3.TFP (bit 10) must be initialised to 0b0.
+
+  - If EL2 is present and the kernel is entered at EL1:
+
+    - CPTR_EL2.TFP (bit 10) must be initialised to 0b0.
+
+  For CPUs with the Scalable Vector Extension (FEAT_SVE) present:
+
+  - if EL3 is present:
+
+    - CPTR_EL3.EZ (bit 8) must be initialised to 0b1.
+
+    - ZCR_EL3.LEN must be initialised to the same value for all CPUs the
+      kernel is executed on.
+
+  - If the kernel is entered at EL1 and EL2 is present:
+
+    - CPTR_EL2.TZ (bit 8) must be initialised to 0b0.
+
+    - CPTR_EL2.ZEN (bits 17:16) must be initialised to 0b11.
+
+    - ZCR_EL2.LEN must be initialised to the same value for all CPUs the
+      kernel will execute on.
+
+  For CPUs with the Scalable Matrix Extension (FEAT_SME):
+
+  - If EL3 is present:
+
+    - CPTR_EL3.ESM (bit 12) must be initialised to 0b1.
+
+    - SCR_EL3.EnTP2 (bit 41) must be initialised to 0b1.
+
+    - SMCR_EL3.LEN must be initialised to the same value for all CPUs the
+      kernel will execute on.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+    - CPTR_EL2.TSM (bit 12) must be initialised to 0b0.
+
+    - CPTR_EL2.SMEN (bits 25:24) must be initialised to 0b11.
+
+    - SCTLR_EL2.EnTP2 (bit 60) must be initialised to 0b1.
+
+    - SMCR_EL2.LEN must be initialised to the same value for all CPUs the
+      kernel will execute on.
+
+    - HWFGRTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01.
+
+    - HWFGWTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01.
+
+    - HWFGRTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01.
+
+    - HWFGWTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01.
+
+  For CPUs with the Scalable Matrix Extension FA64 feature (FEAT_SME_FA64):
+
+  - If EL3 is present:
+
+    - SMCR_EL3.FA64 (bit 31) must be initialised to 0b1.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+    - SMCR_EL2.FA64 (bit 31) must be initialised to 0b1.
+
+  For CPUs with the Memory Tagging Extension feature (FEAT_MTE2):
+
+  - If EL3 is present:
+
+    - SCR_EL3.ATA (bit 26) must be initialised to 0b1.
+
+  - If the kernel is entered at EL1 and EL2 is present:
+
+    - HCR_EL2.ATA (bit 56) must be initialised to 0b1.
+
+  For CPUs with the Scalable Matrix Extension version 2 (FEAT_SME2):
+
+  - If EL3 is present:
+
+    - SMCR_EL3.EZT0 (bit 30) must be initialised to 0b1.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+    - SMCR_EL2.EZT0 (bit 30) must be initialised to 0b1.
+
+  For CPUs with Memory Copy and Memory Set instructions (FEAT_MOPS):
+
+  - If the kernel is entered at EL1 and EL2 is present:
+
+    - HCRX_EL2.MSCEn (bit 11) must be initialised to 0b1.
+
+  For CPUs with the Extended Translation Control Register feature (FEAT_TCR2):
+
+  - If EL3 is present:
+
+    - SCR_EL3.TCR2En (bit 43) must be initialised to 0b1.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+    - HCRX_EL2.TCR2En (bit 14) must be initialised to 0b1.
+
+  For CPUs with the Stage 1 Permission Indirection Extension feature (FEAT_S1PIE):
+
+  - If EL3 is present:
+
+    - SCR_EL3.PIEn (bit 45) must be initialised to 0b1.
+
+  - If the kernel is entered at EL1 and EL2 is present:
+
+    - HFGRTR_EL2.nPIR_EL1 (bit 58) must be initialised to 0b1.
+
+    - HFGWTR_EL2.nPIR_EL1 (bit 58) must be initialised to 0b1.
+
+    - HFGRTR_EL2.nPIRE0_EL1 (bit 57) must be initialised to 0b1.
+
+    - HFGRWR_EL2.nPIRE0_EL1 (bit 57) must be initialised to 0b1.
+
+The requirements described above for CPU mode, caches, MMUs, architected
+timers, coherency and system registers apply to all CPUs.  All CPUs must
+enter the kernel in the same exception level.  Where the values documented
+disable traps it is permissible for these traps to be enabled so long as
+those traps are handled transparently by higher exception levels as though
+the values documented were set.
+
+The boot loader is expected to enter the kernel on each CPU in the
+following manner:
+
+- The primary CPU must jump directly to the first instruction of the
+  kernel image.  The device tree blob passed by this CPU must contain
+  an 'enable-method' property for each cpu node.  The supported
+  enable-methods are described below.
+
+  It is expected that the bootloader will generate these device tree
+  properties and insert them into the blob prior to kernel entry.
+
+- CPUs with a "spin-table" enable-method must have a 'cpu-release-addr'
+  property in their cpu node.  This property identifies a
+  naturally-aligned 64-bit zero-initalised memory location.
+
+  These CPUs should spin outside of the kernel in a reserved area of
+  memory (communicated to the kernel by a /memreserve/ region in the
+  device tree) polling their cpu-release-addr location, which must be
+  contained in the reserved region.  A wfe instruction may be inserted
+  to reduce the overhead of the busy-loop and a sev will be issued by
+  the primary CPU.  When a read of the location pointed to by the
+  cpu-release-addr returns a non-zero value, the CPU must jump to this
+  value.  The value will be written as a single 64-bit little-endian
+  value, so CPUs must convert the read value to their native endianness
+  before jumping to it.
+
+- CPUs with a "psci" enable method should remain outside of
+  the kernel (i.e. outside of the regions of memory described to the
+  kernel in the memory node, or in a reserved area of memory described
+  to the kernel by a /memreserve/ region in the device tree).  The
+  kernel will issue CPU_ON calls as described in ARM document number ARM
+  DEN 0022A ("Power State Coordination Interface System Software on ARM
+  processors") to bring CPUs into the kernel.
+
+  The device tree should contain a 'psci' node, as described in
+  Documentation/devicetree/bindings/arm/psci.yaml.
+
+- Secondary CPU general-purpose register settings
+
+  - x0 = 0 (reserved for future use)
+  - x1 = 0 (reserved for future use)
+  - x2 = 0 (reserved for future use)
+  - x3 = 0 (reserved for future use)
diff --git a/Documentation/arch/arm64/cpu-feature-registers.rst b/Documentation/arch/arm64/cpu-feature-registers.rst
new file mode 100644
index 0000000000000..4e4625f2455fe
--- /dev/null
+++ b/Documentation/arch/arm64/cpu-feature-registers.rst
@@ -0,0 +1,402 @@
+===========================
+ARM64 CPU Feature Registers
+===========================
+
+Author: Suzuki K Poulose <suzuki.poulose@arm.com>
+
+
+This file describes the ABI for exporting the AArch64 CPU ID/feature
+registers to userspace. The availability of this ABI is advertised
+via the HWCAP_CPUID in HWCAPs.
+
+1. Motivation
+-------------
+
+The ARM architecture defines a set of feature registers, which describe
+the capabilities of the CPU/system. Access to these system registers is
+restricted from EL0 and there is no reliable way for an application to
+extract this information to make better decisions at runtime. There is
+limited information available to the application via HWCAPs, however
+there are some issues with their usage.
+
+ a) Any change to the HWCAPs requires an update to userspace (e.g libc)
+    to detect the new changes, which can take a long time to appear in
+    distributions. Exposing the registers allows applications to get the
+    information without requiring updates to the toolchains.
+
+ b) Access to HWCAPs is sometimes limited (e.g prior to libc, or
+    when ld is initialised at startup time).
+
+ c) HWCAPs cannot represent non-boolean information effectively. The
+    architecture defines a canonical format for representing features
+    in the ID registers; this is well defined and is capable of
+    representing all valid architecture variations.
+
+
+2. Requirements
+---------------
+
+ a) Safety:
+
+    Applications should be able to use the information provided by the
+    infrastructure to run safely across the system. This has greater
+    implications on a system with heterogeneous CPUs.
+    The infrastructure exports a value that is safe across all the
+    available CPU on the system.
+
+    e.g, If at least one CPU doesn't implement CRC32 instructions, while
+    others do, we should report that the CRC32 is not implemented.
+    Otherwise an application could crash when scheduled on the CPU
+    which doesn't support CRC32.
+
+ b) Security:
+
+    Applications should only be able to receive information that is
+    relevant to the normal operation in userspace. Hence, some of the
+    fields are masked out(i.e, made invisible) and their values are set to
+    indicate the feature is 'not supported'. See Section 4 for the list
+    of visible features. Also, the kernel may manipulate the fields
+    based on what it supports. e.g, If FP is not supported by the
+    kernel, the values could indicate that the FP is not available
+    (even when the CPU provides it).
+
+ c) Implementation Defined Features
+
+    The infrastructure doesn't expose any register which is
+    IMPLEMENTATION DEFINED as per ARMv8-A Architecture.
+
+ d) CPU Identification:
+
+    MIDR_EL1 is exposed to help identify the processor. On a
+    heterogeneous system, this could be racy (just like getcpu()). The
+    process could be migrated to another CPU by the time it uses the
+    register value, unless the CPU affinity is set. Hence, there is no
+    guarantee that the value reflects the processor that it is
+    currently executing on. The REVIDR is not exposed due to this
+    constraint, as REVIDR makes sense only in conjunction with the
+    MIDR. Alternately, MIDR_EL1 and REVIDR_EL1 are exposed via sysfs
+    at::
+
+	/sys/devices/system/cpu/cpu$ID/regs/identification/
+	                                              \- midr
+	                                              \- revidr
+
+3. Implementation
+--------------------
+
+The infrastructure is built on the emulation of the 'MRS' instruction.
+Accessing a restricted system register from an application generates an
+exception and ends up in SIGILL being delivered to the process.
+The infrastructure hooks into the exception handler and emulates the
+operation if the source belongs to the supported system register space.
+
+The infrastructure emulates only the following system register space::
+
+	Op0=3, Op1=0, CRn=0, CRm=0,2,3,4,5,6,7
+
+(See Table C5-6 'System instruction encodings for non-Debug System
+register accesses' in ARMv8 ARM DDI 0487A.h, for the list of
+registers).
+
+The following rules are applied to the value returned by the
+infrastructure:
+
+ a) The value of an 'IMPLEMENTATION DEFINED' field is set to 0.
+ b) The value of a reserved field is populated with the reserved
+    value as defined by the architecture.
+ c) The value of a 'visible' field holds the system wide safe value
+    for the particular feature (except for MIDR_EL1, see section 4).
+ d) All other fields (i.e, invisible fields) are set to indicate
+    the feature is missing (as defined by the architecture).
+
+4. List of registers with visible features
+-------------------------------------------
+
+  1) ID_AA64ISAR0_EL1 - Instruction Set Attribute Register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | RNDR                         | [63-60] |    y    |
+     +------------------------------+---------+---------+
+     | TS                           | [55-52] |    y    |
+     +------------------------------+---------+---------+
+     | FHM                          | [51-48] |    y    |
+     +------------------------------+---------+---------+
+     | DP                           | [47-44] |    y    |
+     +------------------------------+---------+---------+
+     | SM4                          | [43-40] |    y    |
+     +------------------------------+---------+---------+
+     | SM3                          | [39-36] |    y    |
+     +------------------------------+---------+---------+
+     | SHA3                         | [35-32] |    y    |
+     +------------------------------+---------+---------+
+     | RDM                          | [31-28] |    y    |
+     +------------------------------+---------+---------+
+     | ATOMICS                      | [23-20] |    y    |
+     +------------------------------+---------+---------+
+     | CRC32                        | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SHA2                         | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SHA1                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+     | AES                          | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+
+
+  2) ID_AA64PFR0_EL1 - Processor Feature Register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | DIT                          | [51-48] |    y    |
+     +------------------------------+---------+---------+
+     | SVE                          | [35-32] |    y    |
+     +------------------------------+---------+---------+
+     | GIC                          | [27-24] |    n    |
+     +------------------------------+---------+---------+
+     | AdvSIMD                      | [23-20] |    y    |
+     +------------------------------+---------+---------+
+     | FP                           | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | EL3                          | [15-12] |    n    |
+     +------------------------------+---------+---------+
+     | EL2                          | [11-8]  |    n    |
+     +------------------------------+---------+---------+
+     | EL1                          | [7-4]   |    n    |
+     +------------------------------+---------+---------+
+     | EL0                          | [3-0]   |    n    |
+     +------------------------------+---------+---------+
+
+
+  3) ID_AA64PFR1_EL1 - Processor Feature Register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | MTE                          | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+     | SSBS                         | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+     | BT                           | [3-0]   |    y    |
+     +------------------------------+---------+---------+
+
+
+  4) MIDR_EL1 - Main ID Register
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | Implementer                  | [31-24] |    y    |
+     +------------------------------+---------+---------+
+     | Variant                      | [23-20] |    y    |
+     +------------------------------+---------+---------+
+     | Architecture                 | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | PartNum                      | [15-4]  |    y    |
+     +------------------------------+---------+---------+
+     | Revision                     | [3-0]   |    y    |
+     +------------------------------+---------+---------+
+
+   NOTE: The 'visible' fields of MIDR_EL1 will contain the value
+   as available on the CPU where it is fetched and is not a system
+   wide safe value.
+
+  5) ID_AA64ISAR1_EL1 - Instruction set attribute register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | I8MM                         | [55-52] |    y    |
+     +------------------------------+---------+---------+
+     | DGH                          | [51-48] |    y    |
+     +------------------------------+---------+---------+
+     | BF16                         | [47-44] |    y    |
+     +------------------------------+---------+---------+
+     | SB                           | [39-36] |    y    |
+     +------------------------------+---------+---------+
+     | FRINTTS                      | [35-32] |    y    |
+     +------------------------------+---------+---------+
+     | GPI                          | [31-28] |    y    |
+     +------------------------------+---------+---------+
+     | GPA                          | [27-24] |    y    |
+     +------------------------------+---------+---------+
+     | LRCPC                        | [23-20] |    y    |
+     +------------------------------+---------+---------+
+     | FCMA                         | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | JSCVT                        | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | API                          | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+     | APA                          | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+     | DPB                          | [3-0]   |    y    |
+     +------------------------------+---------+---------+
+
+  6) ID_AA64MMFR0_EL1 - Memory model feature register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | ECV                          | [63-60] |    y    |
+     +------------------------------+---------+---------+
+
+  7) ID_AA64MMFR2_EL1 - Memory model feature register 2
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | AT                           | [35-32] |    y    |
+     +------------------------------+---------+---------+
+
+  8) ID_AA64ZFR0_EL1 - SVE feature ID register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | F64MM                        | [59-56] |    y    |
+     +------------------------------+---------+---------+
+     | F32MM                        | [55-52] |    y    |
+     +------------------------------+---------+---------+
+     | I8MM                         | [47-44] |    y    |
+     +------------------------------+---------+---------+
+     | SM4                          | [43-40] |    y    |
+     +------------------------------+---------+---------+
+     | SHA3                         | [35-32] |    y    |
+     +------------------------------+---------+---------+
+     | BF16                         | [23-20] |    y    |
+     +------------------------------+---------+---------+
+     | BitPerm                      | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | AES                          | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+     | SVEVer                       | [3-0]   |    y    |
+     +------------------------------+---------+---------+
+
+  8) ID_AA64MMFR1_EL1 - Memory model feature register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | AFP                          | [47-44] |    y    |
+     +------------------------------+---------+---------+
+
+  9) ID_AA64ISAR2_EL1 - Instruction set attribute register 2
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | MOPS                         | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | RPRES                        | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+     | WFXT                         | [3-0]   |    y    |
+     +------------------------------+---------+---------+
+
+  10) MVFR0_EL1 - AArch32 Media and VFP Feature Register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | FPDP                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  11) MVFR1_EL1 - AArch32 Media and VFP Feature Register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | SIMDFMAC                     | [31-28] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDSP                       | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDInt                      | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDLS                       | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  12) ID_ISAR5_EL1 - AArch32 Instruction Set Attribute Register 5
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | CRC32                        | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SHA2                         | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SHA1                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+     | AES                          | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+
+
+Appendix I: Example
+-------------------
+
+::
+
+  /*
+   * Sample program to demonstrate the MRS emulation ABI.
+   *
+   * Copyright (C) 2015-2016, ARM Ltd
+   *
+   * Author: Suzuki K Poulose <suzuki.poulose@arm.com>
+   *
+   * This program is free software; you can redistribute it and/or modify
+   * it under the terms of the GNU General Public License version 2 as
+   * published by the Free Software Foundation.
+   *
+   * This program is distributed in the hope that it will be useful,
+   * but WITHOUT ANY WARRANTY; without even the implied warranty of
+   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   * GNU General Public License for more details.
+   * This program is free software; you can redistribute it and/or modify
+   * it under the terms of the GNU General Public License version 2 as
+   * published by the Free Software Foundation.
+   *
+   * This program is distributed in the hope that it will be useful,
+   * but WITHOUT ANY WARRANTY; without even the implied warranty of
+   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   * GNU General Public License for more details.
+   */
+
+  #include <asm/hwcap.h>
+  #include <stdio.h>
+  #include <sys/auxv.h>
+
+  #define get_cpu_ftr(id) ({					\
+		unsigned long __val;				\
+		asm("mrs %0, "#id : "=r" (__val));		\
+		printf("%-20s: 0x%016lx\n", #id, __val);	\
+	})
+
+  int main(void)
+  {
+
+	if (!(getauxval(AT_HWCAP) & HWCAP_CPUID)) {
+		fputs("CPUID registers unavailable\n", stderr);
+		return 1;
+	}
+
+	get_cpu_ftr(ID_AA64ISAR0_EL1);
+	get_cpu_ftr(ID_AA64ISAR1_EL1);
+	get_cpu_ftr(ID_AA64MMFR0_EL1);
+	get_cpu_ftr(ID_AA64MMFR1_EL1);
+	get_cpu_ftr(ID_AA64PFR0_EL1);
+	get_cpu_ftr(ID_AA64PFR1_EL1);
+	get_cpu_ftr(ID_AA64DFR0_EL1);
+	get_cpu_ftr(ID_AA64DFR1_EL1);
+
+	get_cpu_ftr(MIDR_EL1);
+	get_cpu_ftr(MPIDR_EL1);
+	get_cpu_ftr(REVIDR_EL1);
+
+  #if 0
+	/* Unexposed register access causes SIGILL */
+	get_cpu_ftr(ID_MMFR0_EL1);
+  #endif
+
+	return 0;
+  }
diff --git a/Documentation/arch/arm64/elf_hwcaps.rst b/Documentation/arch/arm64/elf_hwcaps.rst
new file mode 100644
index 0000000000000..8c8addb4194c9
--- /dev/null
+++ b/Documentation/arch/arm64/elf_hwcaps.rst
@@ -0,0 +1,312 @@
+.. _elf_hwcaps_index:
+
+================
+ARM64 ELF hwcaps
+================
+
+This document describes the usage and semantics of the arm64 ELF hwcaps.
+
+
+1. Introduction
+---------------
+
+Some hardware or software features are only available on some CPU
+implementations, and/or with certain kernel configurations, but have no
+architected discovery mechanism available to userspace code at EL0. The
+kernel exposes the presence of these features to userspace through a set
+of flags called hwcaps, exposed in the auxiliary vector.
+
+Userspace software can test for features by acquiring the AT_HWCAP or
+AT_HWCAP2 entry of the auxiliary vector, and testing whether the relevant
+flags are set, e.g.::
+
+	bool floating_point_is_present(void)
+	{
+		unsigned long hwcaps = getauxval(AT_HWCAP);
+		if (hwcaps & HWCAP_FP)
+			return true;
+
+		return false;
+	}
+
+Where software relies on a feature described by a hwcap, it should check
+the relevant hwcap flag to verify that the feature is present before
+attempting to make use of the feature.
+
+Features cannot be probed reliably through other means. When a feature
+is not available, attempting to use it may result in unpredictable
+behaviour, and is not guaranteed to result in any reliable indication
+that the feature is unavailable, such as a SIGILL.
+
+
+2. Interpretation of hwcaps
+---------------------------
+
+The majority of hwcaps are intended to indicate the presence of features
+which are described by architected ID registers inaccessible to
+userspace code at EL0. These hwcaps are defined in terms of ID register
+fields, and should be interpreted with reference to the definition of
+these fields in the ARM Architecture Reference Manual (ARM ARM).
+
+Such hwcaps are described below in the form::
+
+    Functionality implied by idreg.field == val.
+
+Such hwcaps indicate the availability of functionality that the ARM ARM
+defines as being present when idreg.field has value val, but do not
+indicate that idreg.field is precisely equal to val, nor do they
+indicate the absence of functionality implied by other values of
+idreg.field.
+
+Other hwcaps may indicate the presence of features which cannot be
+described by ID registers alone. These may be described without
+reference to ID registers, and may refer to other documentation.
+
+
+3. The hwcaps exposed in AT_HWCAP
+---------------------------------
+
+HWCAP_FP
+    Functionality implied by ID_AA64PFR0_EL1.FP == 0b0000.
+
+HWCAP_ASIMD
+    Functionality implied by ID_AA64PFR0_EL1.AdvSIMD == 0b0000.
+
+HWCAP_EVTSTRM
+    The generic timer is configured to generate events at a frequency of
+    approximately 10KHz.
+
+HWCAP_AES
+    Functionality implied by ID_AA64ISAR0_EL1.AES == 0b0001.
+
+HWCAP_PMULL
+    Functionality implied by ID_AA64ISAR0_EL1.AES == 0b0010.
+
+HWCAP_SHA1
+    Functionality implied by ID_AA64ISAR0_EL1.SHA1 == 0b0001.
+
+HWCAP_SHA2
+    Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0001.
+
+HWCAP_CRC32
+    Functionality implied by ID_AA64ISAR0_EL1.CRC32 == 0b0001.
+
+HWCAP_ATOMICS
+    Functionality implied by ID_AA64ISAR0_EL1.Atomic == 0b0010.
+
+HWCAP_FPHP
+    Functionality implied by ID_AA64PFR0_EL1.FP == 0b0001.
+
+HWCAP_ASIMDHP
+    Functionality implied by ID_AA64PFR0_EL1.AdvSIMD == 0b0001.
+
+HWCAP_CPUID
+    EL0 access to certain ID registers is available, to the extent
+    described by Documentation/arch/arm64/cpu-feature-registers.rst.
+
+    These ID registers may imply the availability of features.
+
+HWCAP_ASIMDRDM
+    Functionality implied by ID_AA64ISAR0_EL1.RDM == 0b0001.
+
+HWCAP_JSCVT
+    Functionality implied by ID_AA64ISAR1_EL1.JSCVT == 0b0001.
+
+HWCAP_FCMA
+    Functionality implied by ID_AA64ISAR1_EL1.FCMA == 0b0001.
+
+HWCAP_LRCPC
+    Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0001.
+
+HWCAP_DCPOP
+    Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0001.
+
+HWCAP_SHA3
+    Functionality implied by ID_AA64ISAR0_EL1.SHA3 == 0b0001.
+
+HWCAP_SM3
+    Functionality implied by ID_AA64ISAR0_EL1.SM3 == 0b0001.
+
+HWCAP_SM4
+    Functionality implied by ID_AA64ISAR0_EL1.SM4 == 0b0001.
+
+HWCAP_ASIMDDP
+    Functionality implied by ID_AA64ISAR0_EL1.DP == 0b0001.
+
+HWCAP_SHA512
+    Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0010.
+
+HWCAP_SVE
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001.
+
+HWCAP_ASIMDFHM
+   Functionality implied by ID_AA64ISAR0_EL1.FHM == 0b0001.
+
+HWCAP_DIT
+    Functionality implied by ID_AA64PFR0_EL1.DIT == 0b0001.
+
+HWCAP_USCAT
+    Functionality implied by ID_AA64MMFR2_EL1.AT == 0b0001.
+
+HWCAP_ILRCPC
+    Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0010.
+
+HWCAP_FLAGM
+    Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0001.
+
+HWCAP_SSBS
+    Functionality implied by ID_AA64PFR1_EL1.SSBS == 0b0010.
+
+HWCAP_SB
+    Functionality implied by ID_AA64ISAR1_EL1.SB == 0b0001.
+
+HWCAP_PACA
+    Functionality implied by ID_AA64ISAR1_EL1.APA == 0b0001 or
+    ID_AA64ISAR1_EL1.API == 0b0001, as described by
+    Documentation/arch/arm64/pointer-authentication.rst.
+
+HWCAP_PACG
+    Functionality implied by ID_AA64ISAR1_EL1.GPA == 0b0001 or
+    ID_AA64ISAR1_EL1.GPI == 0b0001, as described by
+    Documentation/arch/arm64/pointer-authentication.rst.
+
+HWCAP2_DCPODP
+    Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0010.
+
+HWCAP2_SVE2
+    Functionality implied by ID_AA64ZFR0_EL1.SVEVer == 0b0001.
+
+HWCAP2_SVEAES
+    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0001.
+
+HWCAP2_SVEPMULL
+    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0010.
+
+HWCAP2_SVEBITPERM
+    Functionality implied by ID_AA64ZFR0_EL1.BitPerm == 0b0001.
+
+HWCAP2_SVESHA3
+    Functionality implied by ID_AA64ZFR0_EL1.SHA3 == 0b0001.
+
+HWCAP2_SVESM4
+    Functionality implied by ID_AA64ZFR0_EL1.SM4 == 0b0001.
+
+HWCAP2_FLAGM2
+    Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0010.
+
+HWCAP2_FRINT
+    Functionality implied by ID_AA64ISAR1_EL1.FRINTTS == 0b0001.
+
+HWCAP2_SVEI8MM
+    Functionality implied by ID_AA64ZFR0_EL1.I8MM == 0b0001.
+
+HWCAP2_SVEF32MM
+    Functionality implied by ID_AA64ZFR0_EL1.F32MM == 0b0001.
+
+HWCAP2_SVEF64MM
+    Functionality implied by ID_AA64ZFR0_EL1.F64MM == 0b0001.
+
+HWCAP2_SVEBF16
+    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0001.
+
+HWCAP2_I8MM
+    Functionality implied by ID_AA64ISAR1_EL1.I8MM == 0b0001.
+
+HWCAP2_BF16
+    Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0001.
+
+HWCAP2_DGH
+    Functionality implied by ID_AA64ISAR1_EL1.DGH == 0b0001.
+
+HWCAP2_RNG
+    Functionality implied by ID_AA64ISAR0_EL1.RNDR == 0b0001.
+
+HWCAP2_BTI
+    Functionality implied by ID_AA64PFR0_EL1.BT == 0b0001.
+
+HWCAP2_MTE
+    Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0010, as described
+    by Documentation/arch/arm64/memory-tagging-extension.rst.
+
+HWCAP2_ECV
+    Functionality implied by ID_AA64MMFR0_EL1.ECV == 0b0001.
+
+HWCAP2_AFP
+    Functionality implied by ID_AA64MFR1_EL1.AFP == 0b0001.
+
+HWCAP2_RPRES
+    Functionality implied by ID_AA64ISAR2_EL1.RPRES == 0b0001.
+
+HWCAP2_MTE3
+    Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0011, as described
+    by Documentation/arch/arm64/memory-tagging-extension.rst.
+
+HWCAP2_SME
+    Functionality implied by ID_AA64PFR1_EL1.SME == 0b0001, as described
+    by Documentation/arch/arm64/sme.rst.
+
+HWCAP2_SME_I16I64
+    Functionality implied by ID_AA64SMFR0_EL1.I16I64 == 0b1111.
+
+HWCAP2_SME_F64F64
+    Functionality implied by ID_AA64SMFR0_EL1.F64F64 == 0b1.
+
+HWCAP2_SME_I8I32
+    Functionality implied by ID_AA64SMFR0_EL1.I8I32 == 0b1111.
+
+HWCAP2_SME_F16F32
+    Functionality implied by ID_AA64SMFR0_EL1.F16F32 == 0b1.
+
+HWCAP2_SME_B16F32
+    Functionality implied by ID_AA64SMFR0_EL1.B16F32 == 0b1.
+
+HWCAP2_SME_F32F32
+    Functionality implied by ID_AA64SMFR0_EL1.F32F32 == 0b1.
+
+HWCAP2_SME_FA64
+    Functionality implied by ID_AA64SMFR0_EL1.FA64 == 0b1.
+
+HWCAP2_WFXT
+    Functionality implied by ID_AA64ISAR2_EL1.WFXT == 0b0010.
+
+HWCAP2_EBF16
+    Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0010.
+
+HWCAP2_SVE_EBF16
+    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0010.
+
+HWCAP2_CSSC
+    Functionality implied by ID_AA64ISAR2_EL1.CSSC == 0b0001.
+
+HWCAP2_RPRFM
+    Functionality implied by ID_AA64ISAR2_EL1.RPRFM == 0b0001.
+
+HWCAP2_SVE2P1
+    Functionality implied by ID_AA64ZFR0_EL1.SVEver == 0b0010.
+
+HWCAP2_SME2
+    Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0001.
+
+HWCAP2_SME2P1
+    Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0010.
+
+HWCAP2_SMEI16I32
+    Functionality implied by ID_AA64SMFR0_EL1.I16I32 == 0b0101
+
+HWCAP2_SMEBI32I32
+    Functionality implied by ID_AA64SMFR0_EL1.BI32I32 == 0b1
+
+HWCAP2_SMEB16B16
+    Functionality implied by ID_AA64SMFR0_EL1.B16B16 == 0b1
+
+HWCAP2_SMEF16F16
+    Functionality implied by ID_AA64SMFR0_EL1.F16F16 == 0b1
+
+HWCAP2_MOPS
+    Functionality implied by ID_AA64ISAR2_EL1.MOPS == 0b0001.
+
+4. Unused AT_HWCAP bits
+-----------------------
+
+For interoperation with userspace, the kernel guarantees that bits 62
+and 63 of AT_HWCAP will always be returned as 0.
diff --git a/Documentation/arch/arm64/features.rst b/Documentation/arch/arm64/features.rst
new file mode 100644
index 0000000000000..dfa4cb3cd3efa
--- /dev/null
+++ b/Documentation/arch/arm64/features.rst
@@ -0,0 +1,3 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. kernel-feat:: $srctree/Documentation/features arm64
diff --git a/Documentation/arch/arm64/hugetlbpage.rst b/Documentation/arch/arm64/hugetlbpage.rst
new file mode 100644
index 0000000000000..a110124c11e38
--- /dev/null
+++ b/Documentation/arch/arm64/hugetlbpage.rst
@@ -0,0 +1,43 @@
+.. _hugetlbpage_index:
+
+====================
+HugeTLBpage on ARM64
+====================
+
+Hugepage relies on making efficient use of TLBs to improve performance of
+address translations. The benefit depends on both -
+
+  - the size of hugepages
+  - size of entries supported by the TLBs
+
+The ARM64 port supports two flavours of hugepages.
+
+1) Block mappings at the pud/pmd level
+--------------------------------------
+
+These are regular hugepages where a pmd or a pud page table entry points to a
+block of memory. Regardless of the supported size of entries in TLB, block
+mappings reduce the depth of page table walk needed to translate hugepage
+addresses.
+
+2) Using the Contiguous bit
+---------------------------
+
+The architecture provides a contiguous bit in the translation table entries
+(D4.5.3, ARM DDI 0487C.a) that hints to the MMU to indicate that it is one of a
+contiguous set of entries that can be cached in a single TLB entry.
+
+The contiguous bit is used in Linux to increase the mapping size at the pmd and
+pte (last) level. The number of supported contiguous entries varies by page size
+and level of the page table.
+
+
+The following hugepage sizes are supported -
+
+  ====== ========   ====    ========    ===
+  -      CONT PTE    PMD    CONT PMD    PUD
+  ====== ========   ====    ========    ===
+  4K:         64K     2M         32M     1G
+  16K:         2M    32M          1G
+  64K:         2M   512M         16G
+  ====== ========   ====    ========    ===
diff --git a/Documentation/arch/arm64/index.rst b/Documentation/arch/arm64/index.rst
new file mode 100644
index 0000000000000..d08e924204bf1
--- /dev/null
+++ b/Documentation/arch/arm64/index.rst
@@ -0,0 +1,38 @@
+.. _arm64_index:
+
+==================
+ARM64 Architecture
+==================
+
+.. toctree::
+    :maxdepth: 1
+
+    acpi_object_usage
+    amu
+    arm-acpi
+    asymmetric-32bit
+    booting
+    cpu-feature-registers
+    elf_hwcaps
+    hugetlbpage
+    kdump
+    legacy_instructions
+    memory
+    memory-tagging-extension
+    perf
+    pointer-authentication
+    ptdump
+    silicon-errata
+    sme
+    sve
+    tagged-address-abi
+    tagged-pointers
+
+    features
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/arch/arm64/kasan-offsets.sh b/Documentation/arch/arm64/kasan-offsets.sh
new file mode 100644
index 0000000000000..2dc5f9e18039b
--- /dev/null
+++ b/Documentation/arch/arm64/kasan-offsets.sh
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+# Print out the KASAN_SHADOW_OFFSETS required to place the KASAN SHADOW
+# start address at the top of the linear region
+
+print_kasan_offset () {
+	printf "%02d\t" $1
+	printf "0x%08x00000000\n" $(( (0xffffffff & (-1 << ($1 - 1 - 32))) \
+			- (1 << (64 - 32 - $2)) ))
+}
+
+echo KASAN_SHADOW_SCALE_SHIFT = 3
+printf "VABITS\tKASAN_SHADOW_OFFSET\n"
+print_kasan_offset 48 3
+print_kasan_offset 47 3
+print_kasan_offset 42 3
+print_kasan_offset 39 3
+print_kasan_offset 36 3
+echo
+echo KASAN_SHADOW_SCALE_SHIFT = 4
+printf "VABITS\tKASAN_SHADOW_OFFSET\n"
+print_kasan_offset 48 4
+print_kasan_offset 47 4
+print_kasan_offset 42 4
+print_kasan_offset 39 4
+print_kasan_offset 36 4
diff --git a/Documentation/arch/arm64/kdump.rst b/Documentation/arch/arm64/kdump.rst
new file mode 100644
index 0000000000000..56a89f45df28c
--- /dev/null
+++ b/Documentation/arch/arm64/kdump.rst
@@ -0,0 +1,92 @@
+=======================================
+crashkernel memory reservation on arm64
+=======================================
+
+Author: Baoquan He <bhe@redhat.com>
+
+Kdump mechanism is used to capture a corrupted kernel vmcore so that
+it can be subsequently analyzed. In order to do this, a preliminarily
+reserved memory is needed to pre-load the kdump kernel and boot such
+kernel if corruption happens.
+
+That reserved memory for kdump is adapted to be able to minimally
+accommodate the kdump kernel and the user space programs needed for the
+vmcore collection.
+
+Kernel parameter
+================
+
+Through the kernel parameters below, memory can be reserved accordingly
+during the early stage of the first kernel booting so that a continuous
+large chunk of memomy can be found. The low memory reservation needs to
+be considered if the crashkernel is reserved from the high memory area.
+
+- crashkernel=size@offset
+- crashkernel=size
+- crashkernel=size,high crashkernel=size,low
+
+Low memory and high memory
+==========================
+
+For kdump reservations, low memory is the memory area under a specific
+limit, usually decided by the accessible address bits of the DMA-capable
+devices needed by the kdump kernel to run. Those devices not related to
+vmcore dumping can be ignored. On arm64, the low memory upper bound is
+not fixed: it is 1G on the RPi4 platform but 4G on most other systems.
+On special kernels built with CONFIG_ZONE_(DMA|DMA32) disabled, the
+whole system RAM is low memory. Outside of the low memory described
+above, the rest of system RAM is considered high memory.
+
+Implementation
+==============
+
+1) crashkernel=size@offset
+--------------------------
+
+The crashkernel memory must be reserved at the user-specified region or
+fail if already occupied.
+
+
+2) crashkernel=size
+-------------------
+
+The crashkernel memory region will be reserved in any available position
+according to the search order:
+
+Firstly, the kernel searches the low memory area for an available region
+with the specified size.
+
+If searching for low memory fails, the kernel falls back to searching
+the high memory area for an available region of the specified size. If
+the reservation in high memory succeeds, a default size reservation in
+the low memory will be done. Currently the default size is 128M,
+sufficient for the low memory needs of the kdump kernel.
+
+Note: crashkernel=size is the recommended option for crashkernel kernel
+reservations. The user would not need to know the system memory layout
+for a specific platform.
+
+3) crashkernel=size,high crashkernel=size,low
+---------------------------------------------
+
+crashkernel=size,(high|low) are an important supplement to
+crashkernel=size. They allows the user to specify how much memory needs
+to be allocated from the high memory and low memory respectively. On
+many systems the low memory is precious and crashkernel reservations
+from this area should be kept to a minimum.
+
+To reserve memory for crashkernel=size,high, searching is first
+attempted from the high memory region. If the reservation succeeds, the
+low memory reservation will be done subsequently.
+
+If reservation from the high memory failed, the kernel falls back to
+searching the low memory with the specified size in crashkernel=,high.
+If it succeeds, no further reservation for low memory is needed.
+
+Notes:
+
+- If crashkernel=,low is not specified, the default low memory
+  reservation will be done automatically.
+
+- if crashkernel=0,low is specified, it means that the low memory
+  reservation is omitted intentionally.
diff --git a/Documentation/arch/arm64/legacy_instructions.rst b/Documentation/arch/arm64/legacy_instructions.rst
new file mode 100644
index 0000000000000..54401b22cb8f9
--- /dev/null
+++ b/Documentation/arch/arm64/legacy_instructions.rst
@@ -0,0 +1,68 @@
+===================
+Legacy instructions
+===================
+
+The arm64 port of the Linux kernel provides infrastructure to support
+emulation of instructions which have been deprecated, or obsoleted in
+the architecture. The infrastructure code uses undefined instruction
+hooks to support emulation. Where available it also allows turning on
+the instruction execution in hardware.
+
+The emulation mode can be controlled by writing to sysctl nodes
+(/proc/sys/abi). The following explains the different execution
+behaviours and the corresponding values of the sysctl nodes -
+
+* Undef
+    Value: 0
+
+  Generates undefined instruction abort. Default for instructions that
+  have been obsoleted in the architecture, e.g., SWP
+
+* Emulate
+    Value: 1
+
+  Uses software emulation. To aid migration of software, in this mode
+  usage of emulated instruction is traced as well as rate limited
+  warnings are issued. This is the default for deprecated
+  instructions, .e.g., CP15 barriers
+
+* Hardware Execution
+    Value: 2
+
+  Although marked as deprecated, some implementations may support the
+  enabling/disabling of hardware support for the execution of these
+  instructions. Using hardware execution generally provides better
+  performance, but at the loss of ability to gather runtime statistics
+  about the use of the deprecated instructions.
+
+The default mode depends on the status of the instruction in the
+architecture. Deprecated instructions should default to emulation
+while obsolete instructions must be undefined by default.
+
+Note: Instruction emulation may not be possible in all cases. See
+individual instruction notes for further information.
+
+Supported legacy instructions
+-----------------------------
+* SWP{B}
+
+:Node: /proc/sys/abi/swp
+:Status: Obsolete
+:Default: Undef (0)
+
+* CP15 Barriers
+
+:Node: /proc/sys/abi/cp15_barrier
+:Status: Deprecated
+:Default: Emulate (1)
+
+* SETEND
+
+:Node: /proc/sys/abi/setend
+:Status: Deprecated
+:Default: Emulate (1)*
+
+  Note: All the cpus on the system must have mixed endian support at EL0
+  for this feature to be enabled. If a new CPU - which doesn't support mixed
+  endian - is hotplugged in after this feature has been enabled, there could
+  be unexpected results in the application.
diff --git a/Documentation/arch/arm64/memory-tagging-extension.rst b/Documentation/arch/arm64/memory-tagging-extension.rst
new file mode 100644
index 0000000000000..679725030731d
--- /dev/null
+++ b/Documentation/arch/arm64/memory-tagging-extension.rst
@@ -0,0 +1,375 @@
+===============================================
+Memory Tagging Extension (MTE) in AArch64 Linux
+===============================================
+
+Authors: Vincenzo Frascino <vincenzo.frascino@arm.com>
+         Catalin Marinas <catalin.marinas@arm.com>
+
+Date: 2020-02-25
+
+This document describes the provision of the Memory Tagging Extension
+functionality in AArch64 Linux.
+
+Introduction
+============
+
+ARMv8.5 based processors introduce the Memory Tagging Extension (MTE)
+feature. MTE is built on top of the ARMv8.0 virtual address tagging TBI
+(Top Byte Ignore) feature and allows software to access a 4-bit
+allocation tag for each 16-byte granule in the physical address space.
+Such memory range must be mapped with the Normal-Tagged memory
+attribute. A logical tag is derived from bits 59-56 of the virtual
+address used for the memory access. A CPU with MTE enabled will compare
+the logical tag against the allocation tag and potentially raise an
+exception on mismatch, subject to system registers configuration.
+
+Userspace Support
+=================
+
+When ``CONFIG_ARM64_MTE`` is selected and Memory Tagging Extension is
+supported by the hardware, the kernel advertises the feature to
+userspace via ``HWCAP2_MTE``.
+
+PROT_MTE
+--------
+
+To access the allocation tags, a user process must enable the Tagged
+memory attribute on an address range using a new ``prot`` flag for
+``mmap()`` and ``mprotect()``:
+
+``PROT_MTE`` - Pages allow access to the MTE allocation tags.
+
+The allocation tag is set to 0 when such pages are first mapped in the
+user address space and preserved on copy-on-write. ``MAP_SHARED`` is
+supported and the allocation tags can be shared between processes.
+
+**Note**: ``PROT_MTE`` is only supported on ``MAP_ANONYMOUS`` and
+RAM-based file mappings (``tmpfs``, ``memfd``). Passing it to other
+types of mapping will result in ``-EINVAL`` returned by these system
+calls.
+
+**Note**: The ``PROT_MTE`` flag (and corresponding memory type) cannot
+be cleared by ``mprotect()``.
+
+**Note**: ``madvise()`` memory ranges with ``MADV_DONTNEED`` and
+``MADV_FREE`` may have the allocation tags cleared (set to 0) at any
+point after the system call.
+
+Tag Check Faults
+----------------
+
+When ``PROT_MTE`` is enabled on an address range and a mismatch between
+the logical and allocation tags occurs on access, there are three
+configurable behaviours:
+
+- *Ignore* - This is the default mode. The CPU (and kernel) ignores the
+  tag check fault.
+
+- *Synchronous* - The kernel raises a ``SIGSEGV`` synchronously, with
+  ``.si_code = SEGV_MTESERR`` and ``.si_addr = <fault-address>``. The
+  memory access is not performed. If ``SIGSEGV`` is ignored or blocked
+  by the offending thread, the containing process is terminated with a
+  ``coredump``.
+
+- *Asynchronous* - The kernel raises a ``SIGSEGV``, in the offending
+  thread, asynchronously following one or multiple tag check faults,
+  with ``.si_code = SEGV_MTEAERR`` and ``.si_addr = 0`` (the faulting
+  address is unknown).
+
+- *Asymmetric* - Reads are handled as for synchronous mode while writes
+  are handled as for asynchronous mode.
+
+The user can select the above modes, per thread, using the
+``prctl(PR_SET_TAGGED_ADDR_CTRL, flags, 0, 0, 0)`` system call where ``flags``
+contains any number of the following values in the ``PR_MTE_TCF_MASK``
+bit-field:
+
+- ``PR_MTE_TCF_NONE``  - *Ignore* tag check faults
+                         (ignored if combined with other options)
+- ``PR_MTE_TCF_SYNC``  - *Synchronous* tag check fault mode
+- ``PR_MTE_TCF_ASYNC`` - *Asynchronous* tag check fault mode
+
+If no modes are specified, tag check faults are ignored. If a single
+mode is specified, the program will run in that mode. If multiple
+modes are specified, the mode is selected as described in the "Per-CPU
+preferred tag checking modes" section below.
+
+The current tag check fault configuration can be read using the
+``prctl(PR_GET_TAGGED_ADDR_CTRL, 0, 0, 0, 0)`` system call. If
+multiple modes were requested then all will be reported.
+
+Tag checking can also be disabled for a user thread by setting the
+``PSTATE.TCO`` bit with ``MSR TCO, #1``.
+
+**Note**: Signal handlers are always invoked with ``PSTATE.TCO = 0``,
+irrespective of the interrupted context. ``PSTATE.TCO`` is restored on
+``sigreturn()``.
+
+**Note**: There are no *match-all* logical tags available for user
+applications.
+
+**Note**: Kernel accesses to the user address space (e.g. ``read()``
+system call) are not checked if the user thread tag checking mode is
+``PR_MTE_TCF_NONE`` or ``PR_MTE_TCF_ASYNC``. If the tag checking mode is
+``PR_MTE_TCF_SYNC``, the kernel makes a best effort to check its user
+address accesses, however it cannot always guarantee it. Kernel accesses
+to user addresses are always performed with an effective ``PSTATE.TCO``
+value of zero, regardless of the user configuration.
+
+Excluding Tags in the ``IRG``, ``ADDG`` and ``SUBG`` instructions
+-----------------------------------------------------------------
+
+The architecture allows excluding certain tags to be randomly generated
+via the ``GCR_EL1.Exclude`` register bit-field. By default, Linux
+excludes all tags other than 0. A user thread can enable specific tags
+in the randomly generated set using the ``prctl(PR_SET_TAGGED_ADDR_CTRL,
+flags, 0, 0, 0)`` system call where ``flags`` contains the tags bitmap
+in the ``PR_MTE_TAG_MASK`` bit-field.
+
+**Note**: The hardware uses an exclude mask but the ``prctl()``
+interface provides an include mask. An include mask of ``0`` (exclusion
+mask ``0xffff``) results in the CPU always generating tag ``0``.
+
+Per-CPU preferred tag checking mode
+-----------------------------------
+
+On some CPUs the performance of MTE in stricter tag checking modes
+is similar to that of less strict tag checking modes. This makes it
+worthwhile to enable stricter checks on those CPUs when a less strict
+checking mode is requested, in order to gain the error detection
+benefits of the stricter checks without the performance downsides. To
+support this scenario, a privileged user may configure a stricter
+tag checking mode as the CPU's preferred tag checking mode.
+
+The preferred tag checking mode for each CPU is controlled by
+``/sys/devices/system/cpu/cpu<N>/mte_tcf_preferred``, to which a
+privileged user may write the value ``async``, ``sync`` or ``asymm``.  The
+default preferred mode for each CPU is ``async``.
+
+To allow a program to potentially run in the CPU's preferred tag
+checking mode, the user program may set multiple tag check fault mode
+bits in the ``flags`` argument to the ``prctl(PR_SET_TAGGED_ADDR_CTRL,
+flags, 0, 0, 0)`` system call. If both synchronous and asynchronous
+modes are requested then asymmetric mode may also be selected by the
+kernel. If the CPU's preferred tag checking mode is in the task's set
+of provided tag checking modes, that mode will be selected. Otherwise,
+one of the modes in the task's mode will be selected by the kernel
+from the task's mode set using the preference order:
+
+	1. Asynchronous
+	2. Asymmetric
+	3. Synchronous
+
+Note that there is no way for userspace to request multiple modes and
+also disable asymmetric mode.
+
+Initial process state
+---------------------
+
+On ``execve()``, the new process has the following configuration:
+
+- ``PR_TAGGED_ADDR_ENABLE`` set to 0 (disabled)
+- No tag checking modes are selected (tag check faults ignored)
+- ``PR_MTE_TAG_MASK`` set to 0 (all tags excluded)
+- ``PSTATE.TCO`` set to 0
+- ``PROT_MTE`` not set on any of the initial memory maps
+
+On ``fork()``, the new process inherits the parent's configuration and
+memory map attributes with the exception of the ``madvise()`` ranges
+with ``MADV_WIPEONFORK`` which will have the data and tags cleared (set
+to 0).
+
+The ``ptrace()`` interface
+--------------------------
+
+``PTRACE_PEEKMTETAGS`` and ``PTRACE_POKEMTETAGS`` allow a tracer to read
+the tags from or set the tags to a tracee's address space. The
+``ptrace()`` system call is invoked as ``ptrace(request, pid, addr,
+data)`` where:
+
+- ``request`` - one of ``PTRACE_PEEKMTETAGS`` or ``PTRACE_POKEMTETAGS``.
+- ``pid`` - the tracee's PID.
+- ``addr`` - address in the tracee's address space.
+- ``data`` - pointer to a ``struct iovec`` where ``iov_base`` points to
+  a buffer of ``iov_len`` length in the tracer's address space.
+
+The tags in the tracer's ``iov_base`` buffer are represented as one
+4-bit tag per byte and correspond to a 16-byte MTE tag granule in the
+tracee's address space.
+
+**Note**: If ``addr`` is not aligned to a 16-byte granule, the kernel
+will use the corresponding aligned address.
+
+``ptrace()`` return value:
+
+- 0 - tags were copied, the tracer's ``iov_len`` was updated to the
+  number of tags transferred. This may be smaller than the requested
+  ``iov_len`` if the requested address range in the tracee's or the
+  tracer's space cannot be accessed or does not have valid tags.
+- ``-EPERM`` - the specified process cannot be traced.
+- ``-EIO`` - the tracee's address range cannot be accessed (e.g. invalid
+  address) and no tags copied. ``iov_len`` not updated.
+- ``-EFAULT`` - fault on accessing the tracer's memory (``struct iovec``
+  or ``iov_base`` buffer) and no tags copied. ``iov_len`` not updated.
+- ``-EOPNOTSUPP`` - the tracee's address does not have valid tags (never
+  mapped with the ``PROT_MTE`` flag). ``iov_len`` not updated.
+
+**Note**: There are no transient errors for the requests above, so user
+programs should not retry in case of a non-zero system call return.
+
+``PTRACE_GETREGSET`` and ``PTRACE_SETREGSET`` with ``addr ==
+``NT_ARM_TAGGED_ADDR_CTRL`` allow ``ptrace()`` access to the tagged
+address ABI control and MTE configuration of a process as per the
+``prctl()`` options described in
+Documentation/arch/arm64/tagged-address-abi.rst and above. The corresponding
+``regset`` is 1 element of 8 bytes (``sizeof(long))``).
+
+Core dump support
+-----------------
+
+The allocation tags for user memory mapped with ``PROT_MTE`` are dumped
+in the core file as additional ``PT_AARCH64_MEMTAG_MTE`` segments. The
+program header for such segment is defined as:
+
+:``p_type``: ``PT_AARCH64_MEMTAG_MTE``
+:``p_flags``: 0
+:``p_offset``: segment file offset
+:``p_vaddr``: segment virtual address, same as the corresponding
+  ``PT_LOAD`` segment
+:``p_paddr``: 0
+:``p_filesz``: segment size in file, calculated as ``p_mem_sz / 32``
+  (two 4-bit tags cover 32 bytes of memory)
+:``p_memsz``: segment size in memory, same as the corresponding
+  ``PT_LOAD`` segment
+:``p_align``: 0
+
+The tags are stored in the core file at ``p_offset`` as two 4-bit tags
+in a byte. With the tag granule of 16 bytes, a 4K page requires 128
+bytes in the core file.
+
+Example of correct usage
+========================
+
+*MTE Example code*
+
+.. code-block:: c
+
+    /*
+     * To be compiled with -march=armv8.5-a+memtag
+     */
+    #include <errno.h>
+    #include <stdint.h>
+    #include <stdio.h>
+    #include <stdlib.h>
+    #include <unistd.h>
+    #include <sys/auxv.h>
+    #include <sys/mman.h>
+    #include <sys/prctl.h>
+
+    /*
+     * From arch/arm64/include/uapi/asm/hwcap.h
+     */
+    #define HWCAP2_MTE              (1 << 18)
+
+    /*
+     * From arch/arm64/include/uapi/asm/mman.h
+     */
+    #define PROT_MTE                 0x20
+
+    /*
+     * From include/uapi/linux/prctl.h
+     */
+    #define PR_SET_TAGGED_ADDR_CTRL 55
+    #define PR_GET_TAGGED_ADDR_CTRL 56
+    # define PR_TAGGED_ADDR_ENABLE  (1UL << 0)
+    # define PR_MTE_TCF_SHIFT       1
+    # define PR_MTE_TCF_NONE        (0UL << PR_MTE_TCF_SHIFT)
+    # define PR_MTE_TCF_SYNC        (1UL << PR_MTE_TCF_SHIFT)
+    # define PR_MTE_TCF_ASYNC       (2UL << PR_MTE_TCF_SHIFT)
+    # define PR_MTE_TCF_MASK        (3UL << PR_MTE_TCF_SHIFT)
+    # define PR_MTE_TAG_SHIFT       3
+    # define PR_MTE_TAG_MASK        (0xffffUL << PR_MTE_TAG_SHIFT)
+
+    /*
+     * Insert a random logical tag into the given pointer.
+     */
+    #define insert_random_tag(ptr) ({                       \
+            uint64_t __val;                                 \
+            asm("irg %0, %1" : "=r" (__val) : "r" (ptr));   \
+            __val;                                          \
+    })
+
+    /*
+     * Set the allocation tag on the destination address.
+     */
+    #define set_tag(tagged_addr) do {                                      \
+            asm volatile("stg %0, [%0]" : : "r" (tagged_addr) : "memory"); \
+    } while (0)
+
+    int main()
+    {
+            unsigned char *a;
+            unsigned long page_sz = sysconf(_SC_PAGESIZE);
+            unsigned long hwcap2 = getauxval(AT_HWCAP2);
+
+            /* check if MTE is present */
+            if (!(hwcap2 & HWCAP2_MTE))
+                    return EXIT_FAILURE;
+
+            /*
+             * Enable the tagged address ABI, synchronous or asynchronous MTE
+             * tag check faults (based on per-CPU preference) and allow all
+             * non-zero tags in the randomly generated set.
+             */
+            if (prctl(PR_SET_TAGGED_ADDR_CTRL,
+                      PR_TAGGED_ADDR_ENABLE | PR_MTE_TCF_SYNC | PR_MTE_TCF_ASYNC |
+                      (0xfffe << PR_MTE_TAG_SHIFT),
+                      0, 0, 0)) {
+                    perror("prctl() failed");
+                    return EXIT_FAILURE;
+            }
+
+            a = mmap(0, page_sz, PROT_READ | PROT_WRITE,
+                     MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+            if (a == MAP_FAILED) {
+                    perror("mmap() failed");
+                    return EXIT_FAILURE;
+            }
+
+            /*
+             * Enable MTE on the above anonymous mmap. The flag could be passed
+             * directly to mmap() and skip this step.
+             */
+            if (mprotect(a, page_sz, PROT_READ | PROT_WRITE | PROT_MTE)) {
+                    perror("mprotect() failed");
+                    return EXIT_FAILURE;
+            }
+
+            /* access with the default tag (0) */
+            a[0] = 1;
+            a[1] = 2;
+
+            printf("a[0] = %hhu a[1] = %hhu\n", a[0], a[1]);
+
+            /* set the logical and allocation tags */
+            a = (unsigned char *)insert_random_tag(a);
+            set_tag(a);
+
+            printf("%p\n", a);
+
+            /* non-zero tag access */
+            a[0] = 3;
+            printf("a[0] = %hhu a[1] = %hhu\n", a[0], a[1]);
+
+            /*
+             * If MTE is enabled correctly the next instruction will generate an
+             * exception.
+             */
+            printf("Expecting SIGSEGV...\n");
+            a[16] = 0xdd;
+
+            /* this should not be printed in the PR_MTE_TCF_SYNC mode */
+            printf("...haven't got one\n");
+
+            return EXIT_FAILURE;
+    }
diff --git a/Documentation/arch/arm64/memory.rst b/Documentation/arch/arm64/memory.rst
new file mode 100644
index 0000000000000..55a55f30eed8a
--- /dev/null
+++ b/Documentation/arch/arm64/memory.rst
@@ -0,0 +1,167 @@
+==============================
+Memory Layout on AArch64 Linux
+==============================
+
+Author: Catalin Marinas <catalin.marinas@arm.com>
+
+This document describes the virtual memory layout used by the AArch64
+Linux kernel. The architecture allows up to 4 levels of translation
+tables with a 4KB page size and up to 3 levels with a 64KB page size.
+
+AArch64 Linux uses either 3 levels or 4 levels of translation tables
+with the 4KB page configuration, allowing 39-bit (512GB) or 48-bit
+(256TB) virtual addresses, respectively, for both user and kernel. With
+64KB pages, only 2 levels of translation tables, allowing 42-bit (4TB)
+virtual address, are used but the memory layout is the same.
+
+ARMv8.2 adds optional support for Large Virtual Address space. This is
+only available when running with a 64KB page size and expands the
+number of descriptors in the first level of translation.
+
+User addresses have bits 63:48 set to 0 while the kernel addresses have
+the same bits set to 1. TTBRx selection is given by bit 63 of the
+virtual address. The swapper_pg_dir contains only kernel (global)
+mappings while the user pgd contains only user (non-global) mappings.
+The swapper_pg_dir address is written to TTBR1 and never written to
+TTBR0.
+
+
+AArch64 Linux memory layout with 4KB pages + 4 levels (48-bit)::
+
+  Start			End			Size		Use
+  -----------------------------------------------------------------------
+  0000000000000000	0000ffffffffffff	 256TB		user
+  ffff000000000000	ffff7fffffffffff	 128TB		kernel logical memory map
+ [ffff600000000000	ffff7fffffffffff]	  32TB		[kasan shadow region]
+  ffff800000000000	ffff80007fffffff	   2GB		modules
+  ffff800080000000	fffffbffefffffff	 124TB		vmalloc
+  fffffbfff0000000	fffffbfffdffffff	 224MB		fixed mappings (top down)
+  fffffbfffe000000	fffffbfffe7fffff	   8MB		[guard region]
+  fffffbfffe800000	fffffbffff7fffff	  16MB		PCI I/O space
+  fffffbffff800000	fffffbffffffffff	   8MB		[guard region]
+  fffffc0000000000	fffffdffffffffff	   2TB		vmemmap
+  fffffe0000000000	ffffffffffffffff	   2TB		[guard region]
+
+
+AArch64 Linux memory layout with 64KB pages + 3 levels (52-bit with HW support)::
+
+  Start			End			Size		Use
+  -----------------------------------------------------------------------
+  0000000000000000	000fffffffffffff	   4PB		user
+  fff0000000000000	ffff7fffffffffff	  ~4PB		kernel logical memory map
+ [fffd800000000000	ffff7fffffffffff]	 512TB		[kasan shadow region]
+  ffff800000000000	ffff80007fffffff	   2GB		modules
+  ffff800080000000	fffffbffefffffff	 124TB		vmalloc
+  fffffbfff0000000	fffffbfffdffffff	 224MB		fixed mappings (top down)
+  fffffbfffe000000	fffffbfffe7fffff	   8MB		[guard region]
+  fffffbfffe800000	fffffbffff7fffff	  16MB		PCI I/O space
+  fffffbffff800000	fffffbffffffffff	   8MB		[guard region]
+  fffffc0000000000	ffffffdfffffffff	  ~4TB		vmemmap
+  ffffffe000000000	ffffffffffffffff	 128GB		[guard region]
+
+
+Translation table lookup with 4KB pages::
+
+  +--------+--------+--------+--------+--------+--------+--------+--------+
+  |63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
+  +--------+--------+--------+--------+--------+--------+--------+--------+
+   |                 |         |         |         |         |
+   |                 |         |         |         |         v
+   |                 |         |         |         |   [11:0]  in-page offset
+   |                 |         |         |         +-> [20:12] L3 index
+   |                 |         |         +-----------> [29:21] L2 index
+   |                 |         +---------------------> [38:30] L1 index
+   |                 +-------------------------------> [47:39] L0 index
+   +-------------------------------------------------> [63] TTBR0/1
+
+
+Translation table lookup with 64KB pages::
+
+  +--------+--------+--------+--------+--------+--------+--------+--------+
+  |63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
+  +--------+--------+--------+--------+--------+--------+--------+--------+
+   |                 |    |               |              |
+   |                 |    |               |              v
+   |                 |    |               |            [15:0]  in-page offset
+   |                 |    |               +----------> [28:16] L3 index
+   |                 |    +--------------------------> [41:29] L2 index
+   |                 +-------------------------------> [47:42] L1 index (48-bit)
+   |                                                   [51:42] L1 index (52-bit)
+   +-------------------------------------------------> [63] TTBR0/1
+
+
+When using KVM without the Virtualization Host Extensions, the
+hypervisor maps kernel pages in EL2 at a fixed (and potentially
+random) offset from the linear mapping. See the kern_hyp_va macro and
+kvm_update_va_mask function for more details. MMIO devices such as
+GICv2 gets mapped next to the HYP idmap page, as do vectors when
+ARM64_SPECTRE_V3A is enabled for particular CPUs.
+
+When using KVM with the Virtualization Host Extensions, no additional
+mappings are created, since the host kernel runs directly in EL2.
+
+52-bit VA support in the kernel
+-------------------------------
+If the ARMv8.2-LVA optional feature is present, and we are running
+with a 64KB page size; then it is possible to use 52-bits of address
+space for both userspace and kernel addresses. However, any kernel
+binary that supports 52-bit must also be able to fall back to 48-bit
+at early boot time if the hardware feature is not present.
+
+This fallback mechanism necessitates the kernel .text to be in the
+higher addresses such that they are invariant to 48/52-bit VAs. Due
+to the kasan shadow being a fraction of the entire kernel VA space,
+the end of the kasan shadow must also be in the higher half of the
+kernel VA space for both 48/52-bit. (Switching from 48-bit to 52-bit,
+the end of the kasan shadow is invariant and dependent on ~0UL,
+whilst the start address will "grow" towards the lower addresses).
+
+In order to optimise phys_to_virt and virt_to_phys, the PAGE_OFFSET
+is kept constant at 0xFFF0000000000000 (corresponding to 52-bit),
+this obviates the need for an extra variable read. The physvirt
+offset and vmemmap offsets are computed at early boot to enable
+this logic.
+
+As a single binary will need to support both 48-bit and 52-bit VA
+spaces, the VMEMMAP must be sized large enough for 52-bit VAs and
+also must be sized large enough to accommodate a fixed PAGE_OFFSET.
+
+Most code in the kernel should not need to consider the VA_BITS, for
+code that does need to know the VA size the variables are
+defined as follows:
+
+VA_BITS		constant	the *maximum* VA space size
+
+VA_BITS_MIN	constant	the *minimum* VA space size
+
+vabits_actual	variable	the *actual* VA space size
+
+
+Maximum and minimum sizes can be useful to ensure that buffers are
+sized large enough or that addresses are positioned close enough for
+the "worst" case.
+
+52-bit userspace VAs
+--------------------
+To maintain compatibility with software that relies on the ARMv8.0
+VA space maximum size of 48-bits, the kernel will, by default,
+return virtual addresses to userspace from a 48-bit range.
+
+Software can "opt-in" to receiving VAs from a 52-bit space by
+specifying an mmap hint parameter that is larger than 48-bit.
+
+For example:
+
+.. code-block:: c
+
+   maybe_high_address = mmap(~0UL, size, prot, flags,...);
+
+It is also possible to build a debug kernel that returns addresses
+from a 52-bit space by enabling the following kernel config options:
+
+.. code-block:: sh
+
+   CONFIG_EXPERT=y && CONFIG_ARM64_FORCE_52BIT=y
+
+Note that this option is only intended for debugging applications
+and should not be used in production.
diff --git a/Documentation/arch/arm64/perf.rst b/Documentation/arch/arm64/perf.rst
new file mode 100644
index 0000000000000..1f87b57c23324
--- /dev/null
+++ b/Documentation/arch/arm64/perf.rst
@@ -0,0 +1,166 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _perf_index:
+
+====
+Perf
+====
+
+Perf Event Attributes
+=====================
+
+:Author: Andrew Murray <andrew.murray@arm.com>
+:Date: 2019-03-06
+
+exclude_user
+------------
+
+This attribute excludes userspace.
+
+Userspace always runs at EL0 and thus this attribute will exclude EL0.
+
+
+exclude_kernel
+--------------
+
+This attribute excludes the kernel.
+
+The kernel runs at EL2 with VHE and EL1 without. Guest kernels always run
+at EL1.
+
+For the host this attribute will exclude EL1 and additionally EL2 on a VHE
+system.
+
+For the guest this attribute will exclude EL1. Please note that EL2 is
+never counted within a guest.
+
+
+exclude_hv
+----------
+
+This attribute excludes the hypervisor.
+
+For a VHE host this attribute is ignored as we consider the host kernel to
+be the hypervisor.
+
+For a non-VHE host this attribute will exclude EL2 as we consider the
+hypervisor to be any code that runs at EL2 which is predominantly used for
+guest/host transitions.
+
+For the guest this attribute has no effect. Please note that EL2 is
+never counted within a guest.
+
+
+exclude_host / exclude_guest
+----------------------------
+
+These attributes exclude the KVM host and guest, respectively.
+
+The KVM host may run at EL0 (userspace), EL1 (non-VHE kernel) and EL2 (VHE
+kernel or non-VHE hypervisor).
+
+The KVM guest may run at EL0 (userspace) and EL1 (kernel).
+
+Due to the overlapping exception levels between host and guests we cannot
+exclusively rely on the PMU's hardware exception filtering - therefore we
+must enable/disable counting on the entry and exit to the guest. This is
+performed differently on VHE and non-VHE systems.
+
+For non-VHE systems we exclude EL2 for exclude_host - upon entering and
+exiting the guest we disable/enable the event as appropriate based on the
+exclude_host and exclude_guest attributes.
+
+For VHE systems we exclude EL1 for exclude_guest and exclude both EL0,EL2
+for exclude_host. Upon entering and exiting the guest we modify the event
+to include/exclude EL0 as appropriate based on the exclude_host and
+exclude_guest attributes.
+
+The statements above also apply when these attributes are used within a
+non-VHE guest however please note that EL2 is never counted within a guest.
+
+
+Accuracy
+--------
+
+On non-VHE hosts we enable/disable counters on the entry/exit of host/guest
+transition at EL2 - however there is a period of time between
+enabling/disabling the counters and entering/exiting the guest. We are
+able to eliminate counters counting host events on the boundaries of guest
+entry/exit when counting guest events by filtering out EL2 for
+exclude_host. However when using !exclude_hv there is a small blackout
+window at the guest entry/exit where host events are not captured.
+
+On VHE systems there are no blackout windows.
+
+Perf Userspace PMU Hardware Counter Access
+==========================================
+
+Overview
+--------
+The perf userspace tool relies on the PMU to monitor events. It offers an
+abstraction layer over the hardware counters since the underlying
+implementation is cpu-dependent.
+Arm64 allows userspace tools to have access to the registers storing the
+hardware counters' values directly.
+
+This targets specifically self-monitoring tasks in order to reduce the overhead
+by directly accessing the registers without having to go through the kernel.
+
+How-to
+------
+The focus is set on the armv8 PMUv3 which makes sure that the access to the pmu
+registers is enabled and that the userspace has access to the relevant
+information in order to use them.
+
+In order to have access to the hardware counters, the global sysctl
+kernel/perf_user_access must first be enabled:
+
+.. code-block:: sh
+
+  echo 1 > /proc/sys/kernel/perf_user_access
+
+It is necessary to open the event using the perf tool interface with config1:1
+attr bit set: the sys_perf_event_open syscall returns a fd which can
+subsequently be used with the mmap syscall in order to retrieve a page of memory
+containing information about the event. The PMU driver uses this page to expose
+to the user the hardware counter's index and other necessary data. Using this
+index enables the user to access the PMU registers using the `mrs` instruction.
+Access to the PMU registers is only valid while the sequence lock is unchanged.
+In particular, the PMSELR_EL0 register is zeroed each time the sequence lock is
+changed.
+
+The userspace access is supported in libperf using the perf_evsel__mmap()
+and perf_evsel__read() functions. See `tools/lib/perf/tests/test-evsel.c`_ for
+an example.
+
+About heterogeneous systems
+---------------------------
+On heterogeneous systems such as big.LITTLE, userspace PMU counter access can
+only be enabled when the tasks are pinned to a homogeneous subset of cores and
+the corresponding PMU instance is opened by specifying the 'type' attribute.
+The use of generic event types is not supported in this case.
+
+Have a look at `tools/perf/arch/arm64/tests/user-events.c`_ for an example. It
+can be run using the perf tool to check that the access to the registers works
+correctly from userspace:
+
+.. code-block:: sh
+
+  perf test -v user
+
+About chained events and counter sizes
+--------------------------------------
+The user can request either a 32-bit (config1:0 == 0) or 64-bit (config1:0 == 1)
+counter along with userspace access. The sys_perf_event_open syscall will fail
+if a 64-bit counter is requested and the hardware doesn't support 64-bit
+counters. Chained events are not supported in conjunction with userspace counter
+access. If a 32-bit counter is requested on hardware with 64-bit counters, then
+userspace must treat the upper 32-bits read from the counter as UNKNOWN. The
+'pmc_width' field in the user page will indicate the valid width of the counter
+and should be used to mask the upper bits as needed.
+
+.. Links
+.. _tools/perf/arch/arm64/tests/user-events.c:
+   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/perf/arch/arm64/tests/user-events.c
+.. _tools/lib/perf/tests/test-evsel.c:
+   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/lib/perf/tests/test-evsel.c
diff --git a/Documentation/arch/arm64/pointer-authentication.rst b/Documentation/arch/arm64/pointer-authentication.rst
new file mode 100644
index 0000000000000..e5dad2e40aa89
--- /dev/null
+++ b/Documentation/arch/arm64/pointer-authentication.rst
@@ -0,0 +1,142 @@
+=======================================
+Pointer authentication in AArch64 Linux
+=======================================
+
+Author: Mark Rutland <mark.rutland@arm.com>
+
+Date: 2017-07-19
+
+This document briefly describes the provision of pointer authentication
+functionality in AArch64 Linux.
+
+
+Architecture overview
+---------------------
+
+The ARMv8.3 Pointer Authentication extension adds primitives that can be
+used to mitigate certain classes of attack where an attacker can corrupt
+the contents of some memory (e.g. the stack).
+
+The extension uses a Pointer Authentication Code (PAC) to determine
+whether pointers have been modified unexpectedly. A PAC is derived from
+a pointer, another value (such as the stack pointer), and a secret key
+held in system registers.
+
+The extension adds instructions to insert a valid PAC into a pointer,
+and to verify/remove the PAC from a pointer. The PAC occupies a number
+of high-order bits of the pointer, which varies dependent on the
+configured virtual address size and whether pointer tagging is in use.
+
+A subset of these instructions have been allocated from the HINT
+encoding space. In the absence of the extension (or when disabled),
+these instructions behave as NOPs. Applications and libraries using
+these instructions operate correctly regardless of the presence of the
+extension.
+
+The extension provides five separate keys to generate PACs - two for
+instruction addresses (APIAKey, APIBKey), two for data addresses
+(APDAKey, APDBKey), and one for generic authentication (APGAKey).
+
+
+Basic support
+-------------
+
+When CONFIG_ARM64_PTR_AUTH is selected, and relevant HW support is
+present, the kernel will assign random key values to each process at
+exec*() time. The keys are shared by all threads within the process, and
+are preserved across fork().
+
+Presence of address authentication functionality is advertised via
+HWCAP_PACA, and generic authentication functionality via HWCAP_PACG.
+
+The number of bits that the PAC occupies in a pointer is 55 minus the
+virtual address size configured by the kernel. For example, with a
+virtual address size of 48, the PAC is 7 bits wide.
+
+When ARM64_PTR_AUTH_KERNEL is selected, the kernel will be compiled
+with HINT space pointer authentication instructions protecting
+function returns. Kernels built with this option will work on hardware
+with or without pointer authentication support.
+
+In addition to exec(), keys can also be reinitialized to random values
+using the PR_PAC_RESET_KEYS prctl. A bitmask of PR_PAC_APIAKEY,
+PR_PAC_APIBKEY, PR_PAC_APDAKEY, PR_PAC_APDBKEY and PR_PAC_APGAKEY
+specifies which keys are to be reinitialized; specifying 0 means "all
+keys".
+
+
+Debugging
+---------
+
+When CONFIG_ARM64_PTR_AUTH is selected, and HW support for address
+authentication is present, the kernel will expose the position of TTBR0
+PAC bits in the NT_ARM_PAC_MASK regset (struct user_pac_mask), which
+userspace can acquire via PTRACE_GETREGSET.
+
+The regset is exposed only when HWCAP_PACA is set. Separate masks are
+exposed for data pointers and instruction pointers, as the set of PAC
+bits can vary between the two. Note that the masks apply to TTBR0
+addresses, and are not valid to apply to TTBR1 addresses (e.g. kernel
+pointers).
+
+Additionally, when CONFIG_CHECKPOINT_RESTORE is also set, the kernel
+will expose the NT_ARM_PACA_KEYS and NT_ARM_PACG_KEYS regsets (struct
+user_pac_address_keys and struct user_pac_generic_keys). These can be
+used to get and set the keys for a thread.
+
+
+Virtualization
+--------------
+
+Pointer authentication is enabled in KVM guest when each virtual cpu is
+initialised by passing flags KVM_ARM_VCPU_PTRAUTH_[ADDRESS/GENERIC] and
+requesting these two separate cpu features to be enabled. The current KVM
+guest implementation works by enabling both features together, so both
+these userspace flags are checked before enabling pointer authentication.
+The separate userspace flag will allow to have no userspace ABI changes
+if support is added in the future to allow these two features to be
+enabled independently of one another.
+
+As Arm Architecture specifies that Pointer Authentication feature is
+implemented along with the VHE feature so KVM arm64 ptrauth code relies
+on VHE mode to be present.
+
+Additionally, when these vcpu feature flags are not set then KVM will
+filter out the Pointer Authentication system key registers from
+KVM_GET/SET_REG_* ioctls and mask those features from cpufeature ID
+register. Any attempt to use the Pointer Authentication instructions will
+result in an UNDEFINED exception being injected into the guest.
+
+
+Enabling and disabling keys
+---------------------------
+
+The prctl PR_PAC_SET_ENABLED_KEYS allows the user program to control which
+PAC keys are enabled in a particular task. It takes two arguments, the
+first being a bitmask of PR_PAC_APIAKEY, PR_PAC_APIBKEY, PR_PAC_APDAKEY
+and PR_PAC_APDBKEY specifying which keys shall be affected by this prctl,
+and the second being a bitmask of the same bits specifying whether the key
+should be enabled or disabled. For example::
+
+  prctl(PR_PAC_SET_ENABLED_KEYS,
+        PR_PAC_APIAKEY | PR_PAC_APIBKEY | PR_PAC_APDAKEY | PR_PAC_APDBKEY,
+        PR_PAC_APIBKEY, 0, 0);
+
+disables all keys except the IB key.
+
+The main reason why this is useful is to enable a userspace ABI that uses PAC
+instructions to sign and authenticate function pointers and other pointers
+exposed outside of the function, while still allowing binaries conforming to
+the ABI to interoperate with legacy binaries that do not sign or authenticate
+pointers.
+
+The idea is that a dynamic loader or early startup code would issue this
+prctl very early after establishing that a process may load legacy binaries,
+but before executing any PAC instructions.
+
+For compatibility with previous kernel versions, processes start up with IA,
+IB, DA and DB enabled, and are reset to this state on exec(). Processes created
+via fork() and clone() inherit the key enabled state from the calling process.
+
+It is recommended to avoid disabling the IA key, as this has higher performance
+overhead than disabling any of the other keys.
diff --git a/Documentation/arch/arm64/ptdump.rst b/Documentation/arch/arm64/ptdump.rst
new file mode 100644
index 0000000000000..5dcfc5d7cddfb
--- /dev/null
+++ b/Documentation/arch/arm64/ptdump.rst
@@ -0,0 +1,96 @@
+======================
+Kernel page table dump
+======================
+
+ptdump is a debugfs interface that provides a detailed dump of the
+kernel page tables. It offers a comprehensive overview of the kernel
+virtual memory layout as well as the attributes associated with the
+various regions in a human-readable format. It is useful to dump the
+kernel page tables to verify permissions and memory types. Examining the
+page table entries and permissions helps identify potential security
+vulnerabilities such as mappings with overly permissive access rights or
+improper memory protections.
+
+Memory hotplug allows dynamic expansion or contraction of available
+memory without requiring a system reboot. To maintain the consistency
+and integrity of the memory management data structures, arm64 makes use
+of the ``mem_hotplug_lock`` semaphore in write mode. Additionally, in
+read mode, ``mem_hotplug_lock`` supports an efficient implementation of
+``get_online_mems()`` and ``put_online_mems()``. These protect the
+offlining of memory being accessed by the ptdump code.
+
+In order to dump the kernel page tables, enable the following
+configurations and mount debugfs::
+
+ CONFIG_GENERIC_PTDUMP=y
+ CONFIG_PTDUMP_CORE=y
+ CONFIG_PTDUMP_DEBUGFS=y
+
+ mount -t debugfs nodev /sys/kernel/debug
+ cat /sys/kernel/debug/kernel_page_tables
+
+On analysing the output of ``cat /sys/kernel/debug/kernel_page_tables``
+one can derive information about the virtual address range of the entry,
+followed by size of the memory region covered by this entry, the
+hierarchical structure of the page tables and finally the attributes
+associated with each page. The page attributes provide information about
+access permissions, execution capability, type of mapping such as leaf
+level PTE or block level PGD, PMD and PUD, and access status of a page
+within the kernel memory. Assessing these attributes can assist in
+understanding the memory layout, access patterns and security
+characteristics of the kernel pages.
+
+Kernel virtual memory layout example::
+
+ start address        end address         size             attributes
+ +---------------------------------------------------------------------------------------+
+ | ---[ Linear Mapping start ]---------------------------------------------------------- |
+ | ..................                                                                    |
+ | 0xfff0000000000000-0xfff0000000210000  2112K PTE RW NX SHD AF  UXN  MEM/NORMAL-TAGGED |
+ | 0xfff0000000210000-0xfff0000001c00000 26560K PTE ro NX SHD AF  UXN  MEM/NORMAL        |
+ | ..................                                                                    |
+ | ---[ Linear Mapping end ]------------------------------------------------------------ |
+ +---------------------------------------------------------------------------------------+
+ | ---[ Modules start ]----------------------------------------------------------------- |
+ | ..................                                                                    |
+ | 0xffff800000000000-0xffff800008000000   128M PTE                                      |
+ | ..................                                                                    |
+ | ---[ Modules end ]------------------------------------------------------------------- |
+ +---------------------------------------------------------------------------------------+
+ | ---[ vmalloc() area ]---------------------------------------------------------------- |
+ | ..................                                                                    |
+ | 0xffff800008010000-0xffff800008200000  1984K PTE ro x  SHD AF       UXN  MEM/NORMAL   |
+ | 0xffff800008200000-0xffff800008e00000    12M PTE ro x  SHD AF  CON  UXN  MEM/NORMAL   |
+ | ..................                                                                    |
+ | ---[ vmalloc() end ]----------------------------------------------------------------- |
+ +---------------------------------------------------------------------------------------+
+ | ---[ Fixmap start ]------------------------------------------------------------------ |
+ | ..................                                                                    |
+ | 0xfffffbfffdb80000-0xfffffbfffdb90000    64K PTE ro x  SHD AF  UXN  MEM/NORMAL        |
+ | 0xfffffbfffdb90000-0xfffffbfffdba0000    64K PTE ro NX SHD AF  UXN  MEM/NORMAL        |
+ | ..................                                                                    |
+ | ---[ Fixmap end ]-------------------------------------------------------------------- |
+ +---------------------------------------------------------------------------------------+
+ | ---[ PCI I/O start ]----------------------------------------------------------------- |
+ | ..................                                                                    |
+ | 0xfffffbfffe800000-0xfffffbffff800000    16M PTE                                      |
+ | ..................                                                                    |
+ | ---[ PCI I/O end ]------------------------------------------------------------------- |
+ +---------------------------------------------------------------------------------------+
+ | ---[ vmemmap start ]----------------------------------------------------------------- |
+ | ..................                                                                    |
+ | 0xfffffc0002000000-0xfffffc0002200000     2M PTE RW NX SHD AF  UXN  MEM/NORMAL        |
+ | 0xfffffc0002200000-0xfffffc0020000000   478M PTE                                      |
+ | ..................                                                                    |
+ | ---[ vmemmap end ]------------------------------------------------------------------- |
+ +---------------------------------------------------------------------------------------+
+
+``cat /sys/kernel/debug/kernel_page_tables`` output::
+
+ 0xfff0000001c00000-0xfff0000080000000     2020M PTE  RW NX SHD AF   UXN    MEM/NORMAL-TAGGED
+ 0xfff0000080000000-0xfff0000800000000       30G PMD
+ 0xfff0000800000000-0xfff0000800700000        7M PTE  RW NX SHD AF   UXN    MEM/NORMAL-TAGGED
+ 0xfff0000800700000-0xfff0000800710000       64K PTE  ro NX SHD AF   UXN    MEM/NORMAL-TAGGED
+ 0xfff0000800710000-0xfff0000880000000  2089920K PTE  RW NX SHD AF   UXN    MEM/NORMAL-TAGGED
+ 0xfff0000880000000-0xfff0040000000000     4062G PMD
+ 0xfff0040000000000-0xffff800000000000     3964T PGD
diff --git a/Documentation/arch/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst
new file mode 100644
index 0000000000000..bedd3a1d7b423
--- /dev/null
+++ b/Documentation/arch/arm64/silicon-errata.rst
@@ -0,0 +1,230 @@
+=======================================
+Silicon Errata and Software Workarounds
+=======================================
+
+Author: Will Deacon <will.deacon@arm.com>
+
+Date  : 27 November 2015
+
+It is an unfortunate fact of life that hardware is often produced with
+so-called "errata", which can cause it to deviate from the architecture
+under specific circumstances.  For hardware produced by ARM, these
+errata are broadly classified into the following categories:
+
+  ==========  ========================================================
+  Category A  A critical error without a viable workaround.
+  Category B  A significant or critical error with an acceptable
+              workaround.
+  Category C  A minor error that is not expected to occur under normal
+              operation.
+  ==========  ========================================================
+
+For more information, consult one of the "Software Developers Errata
+Notice" documents available on infocenter.arm.com (registration
+required).
+
+As far as Linux is concerned, Category B errata may require some special
+treatment in the operating system. For example, avoiding a particular
+sequence of code, or configuring the processor in a particular way. A
+less common situation may require similar actions in order to declassify
+a Category A erratum into a Category C erratum. These are collectively
+known as "software workarounds" and are only required in the minority of
+cases (e.g. those cases that both require a non-secure workaround *and*
+can be triggered by Linux).
+
+For software workarounds that may adversely impact systems unaffected by
+the erratum in question, a Kconfig entry is added under "Kernel
+Features" -> "ARM errata workarounds via the alternatives framework".
+These are enabled by default and patched in at runtime when an affected
+CPU is detected. For less-intrusive workarounds, a Kconfig option is not
+available and the code is structured (preferably with a comment) in such
+a way that the erratum will not be hit.
+
+This approach can make it slightly onerous to determine exactly which
+errata are worked around in an arbitrary kernel source tree, so this
+file acts as a registry of software workarounds in the Linux Kernel and
+will be updated when new workarounds are committed and backported to
+stable kernels.
+
++----------------+-----------------+-----------------+-----------------------------+
+| Implementor    | Component       | Erratum ID      | Kconfig                     |
++================+=================+=================+=============================+
+| Allwinner      | A64/R18         | UNKNOWN1        | SUN50I_ERRATUM_UNKNOWN1     |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Ampere         | AmpereOne       | AC03_CPU_38     | AMPERE_ERRATUM_AC03_CPU_38  |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2064142        | ARM64_ERRATUM_2064142       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2038923        | ARM64_ERRATUM_2038923       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #1902691        | ARM64_ERRATUM_1902691       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319        |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A53      | #824069         | ARM64_ERRATUM_824069        |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A53      | #819472         | ARM64_ERRATUM_819472        |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A53      | #845719         | ARM64_ERRATUM_845719        |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A53      | #843419         | ARM64_ERRATUM_843419        |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A55      | #1530923        | ARM64_ERRATUM_1530923       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A55      | #2441007        | ARM64_ERRATUM_2441007       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075        |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A57      | #852523         | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220        |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A57      | #1319537        | ARM64_ERRATUM_1319367       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A57      | #1742098        | ARM64_ERRATUM_1742098       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A72      | #853709         | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A72      | #1319367        | ARM64_ERRATUM_1319367       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A72      | #1655431        | ARM64_ERRATUM_1742098       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #1188873,1418040| ARM64_ERRATUM_1418040       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #1165522        | ARM64_ERRATUM_1165522       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #1286807        | ARM64_ERRATUM_1286807       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #1463225        | ARM64_ERRATUM_1463225       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2051678        | ARM64_ERRATUM_2051678       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2077057        | ARM64_ERRATUM_2077057       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2441009        | ARM64_ERRATUM_2441009       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2658417        | ARM64_ERRATUM_2658417       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #2224489        | ARM64_ERRATUM_2224489       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A715     | #2645198        | ARM64_ERRATUM_2645198       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #2119858        | ARM64_ERRATUM_2119858       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #2224489        | ARM64_ERRATUM_2224489       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #1349291        | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #1542419        | ARM64_ERRATUM_1542419       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #2139208        | ARM64_ERRATUM_2139208       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #2067961        | ARM64_ERRATUM_2067961       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #2253138        | ARM64_ERRATUM_2253138       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | MMU-500         | #841119,826419  | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | MMU-600         | #1076982,1209401| N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | MMU-700         | #2268618,2812531| N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | GIC-700         | #2941627        | ARM64_ERRATUM_2941627       |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Broadcom       | Brahma-B53      | N/A             | ARM64_ERRATUM_845719        |
++----------------+-----------------+-----------------+-----------------------------+
+| Broadcom       | Brahma-B53      | N/A             | ARM64_ERRATUM_843419        |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX ITS    | #22375,24313    | CAVIUM_ERRATUM_22375        |
++----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX ITS    | #23144          | CAVIUM_ERRATUM_23144        |
++----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX GICv3  | #23154,38545    | CAVIUM_ERRATUM_23154        |
++----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX GICv3  | #38539          | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX Core   | #27456          | CAVIUM_ERRATUM_27456        |
++----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX Core   | #30115          | CAVIUM_ERRATUM_30115        |
++----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX SMMUv2 | #27704          | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX2 SMMUv3| #74             | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX2 SMMUv3| #126            | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX2 Core  | #219            | CAVIUM_TX2_ERRATUM_219      |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Marvell        | ARM-MMU-500     | #582743         | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| NVIDIA         | Carmel Core     | N/A             | NVIDIA_CARMEL_CNP_ERRATUM   |
++----------------+-----------------+-----------------+-----------------------------+
+| NVIDIA         | T241 GICv3/4.x  | T241-FABRIC-4   | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Freescale/NXP  | LS2080A/LS1043A | A-008585        | FSL_ERRATUM_A008585         |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip0{5,6,7}     | #161010101      | HISILICON_ERRATUM_161010101 |
++----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip0{6,7}       | #161010701      | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip0{6,7}       | #161010803      | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip07           | #161600802      | HISILICON_ERRATUM_161600802 |
++----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo/Falkor v1  | E1009           | QCOM_FALKOR_ERRATUM_1009    |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | QDF2400 ITS     | E0065           | QCOM_QDF2400_ERRATUM_0065   |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Falkor v{1,2}   | E1041           | QCOM_FALKOR_ERRATUM_1041    |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1463225       |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1418040       |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1530923       |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1024718       |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1286807       |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Rockchip       | RK3588          | #3588001        | ROCKCHIP_ERRATUM_3588001    |
++----------------+-----------------+-----------------+-----------------------------+
+
++----------------+-----------------+-----------------+-----------------------------+
+| Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
++----------------+-----------------+-----------------+-----------------------------+
+
++----------------+-----------------+-----------------+-----------------------------+
+| ASR            | ASR8601         | #8601001        | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
diff --git a/Documentation/arch/arm64/sme.rst b/Documentation/arch/arm64/sme.rst
new file mode 100644
index 0000000000000..ba529a1dc6065
--- /dev/null
+++ b/Documentation/arch/arm64/sme.rst
@@ -0,0 +1,468 @@
+===================================================
+Scalable Matrix Extension support for AArch64 Linux
+===================================================
+
+This document outlines briefly the interface provided to userspace by Linux in
+order to support use of the ARM Scalable Matrix Extension (SME).
+
+This is an outline of the most important features and issues only and not
+intended to be exhaustive.  It should be read in conjunction with the SVE
+documentation in sve.rst which provides details on the Streaming SVE mode
+included in SME.
+
+This document does not aim to describe the SME architecture or programmer's
+model.  To aid understanding, a minimal description of relevant programmer's
+model features for SME is included in Appendix A.
+
+
+1.  General
+-----------
+
+* PSTATE.SM, PSTATE.ZA, the streaming mode vector length, the ZA and (when
+  present) ZTn register state and TPIDR2_EL0 are tracked per thread.
+
+* The presence of SME is reported to userspace via HWCAP2_SME in the aux vector
+  AT_HWCAP2 entry.  Presence of this flag implies the presence of the SME
+  instructions and registers, and the Linux-specific system interfaces
+  described in this document.  SME is reported in /proc/cpuinfo as "sme".
+
+* The presence of SME2 is reported to userspace via HWCAP2_SME2 in the
+  aux vector AT_HWCAP2 entry.  Presence of this flag implies the presence of
+  the SME2 instructions and ZT0, and the Linux-specific system interfaces
+  described in this document.  SME2 is reported in /proc/cpuinfo as "sme2".
+
+* Support for the execution of SME instructions in userspace can also be
+  detected by reading the CPU ID register ID_AA64PFR1_EL1 using an MRS
+  instruction, and checking that the value of the SME field is nonzero. [3]
+
+  It does not guarantee the presence of the system interfaces described in the
+  following sections: software that needs to verify that those interfaces are
+  present must check for HWCAP2_SME instead.
+
+* There are a number of optional SME features, presence of these is reported
+  through AT_HWCAP2 through:
+
+	HWCAP2_SME_I16I64
+	HWCAP2_SME_F64F64
+	HWCAP2_SME_I8I32
+	HWCAP2_SME_F16F32
+	HWCAP2_SME_B16F32
+	HWCAP2_SME_F32F32
+	HWCAP2_SME_FA64
+        HWCAP2_SME2
+
+  This list may be extended over time as the SME architecture evolves.
+
+  These extensions are also reported via the CPU ID register ID_AA64SMFR0_EL1,
+  which userspace can read using an MRS instruction.  See elf_hwcaps.txt and
+  cpu-feature-registers.txt for details.
+
+* Debuggers should restrict themselves to interacting with the target via the
+  NT_ARM_SVE, NT_ARM_SSVE, NT_ARM_ZA and NT_ARM_ZT regsets.  The recommended
+  way of detecting support for these regsets is to connect to a target process
+  first and then attempt a
+
+	ptrace(PTRACE_GETREGSET, pid, NT_ARM_<regset>, &iov).
+
+* Whenever ZA register values are exchanged in memory between userspace and
+  the kernel, the register value is encoded in memory as a series of horizontal
+  vectors from 0 to VL/8-1 stored in the same endianness invariant format as is
+  used for SVE vectors.
+
+* On thread creation TPIDR2_EL0 is preserved unless CLONE_SETTLS is specified,
+  in which case it is set to 0.
+
+2.  Vector lengths
+------------------
+
+SME defines a second vector length similar to the SVE vector length which is
+controls the size of the streaming mode SVE vectors and the ZA matrix array.
+The ZA matrix is square with each side having as many bytes as a streaming
+mode SVE vector.
+
+
+3.  Sharing of streaming and non-streaming mode SVE state
+---------------------------------------------------------
+
+It is implementation defined which if any parts of the SVE state are shared
+between streaming and non-streaming modes.  When switching between modes
+via software interfaces such as ptrace if no register content is provided as
+part of switching no state will be assumed to be shared and everything will
+be zeroed.
+
+
+4.  System call behaviour
+-------------------------
+
+* On syscall PSTATE.ZA is preserved, if PSTATE.ZA==1 then the contents of the
+  ZA matrix and ZTn (if present) are preserved.
+
+* On syscall PSTATE.SM will be cleared and the SVE registers will be handled
+  as per the standard SVE ABI.
+
+* None of the SVE registers, ZA or ZTn are used to pass arguments to
+  or receive results from any syscall.
+
+* On process creation (eg, clone()) the newly created process will have
+  PSTATE.SM cleared.
+
+* All other SME state of a thread, including the currently configured vector
+  length, the state of the PR_SME_VL_INHERIT flag, and the deferred vector
+  length (if any), is preserved across all syscalls, subject to the specific
+  exceptions for execve() described in section 6.
+
+
+5.  Signal handling
+-------------------
+
+* Signal handlers are invoked with streaming mode and ZA disabled.
+
+* A new signal frame record TPIDR2_MAGIC is added formatted as a struct
+  tpidr2_context to allow access to TPIDR2_EL0 from signal handlers.
+
+* A new signal frame record za_context encodes the ZA register contents on
+  signal delivery. [1]
+
+* The signal frame record for ZA always contains basic metadata, in particular
+  the thread's vector length (in za_context.vl).
+
+* The ZA matrix may or may not be included in the record, depending on
+  the value of PSTATE.ZA.  The registers are present if and only if:
+  za_context.head.size >= ZA_SIG_CONTEXT_SIZE(sve_vq_from_vl(za_context.vl))
+  in which case PSTATE.ZA == 1.
+
+* If matrix data is present, the remainder of the record has a vl-dependent
+  size and layout.  Macros ZA_SIG_* are defined [1] to facilitate access to
+  them.
+
+* The matrix is stored as a series of horizontal vectors in the same format as
+  is used for SVE vectors.
+
+* If the ZA context is too big to fit in sigcontext.__reserved[], then extra
+  space is allocated on the stack, an extra_context record is written in
+  __reserved[] referencing this space.  za_context is then written in the
+  extra space.  Refer to [1] for further details about this mechanism.
+
+* If ZTn is supported and PSTATE.ZA==1 then a signal frame record for ZTn will
+  be generated.
+
+* The signal record for ZTn has magic ZT_MAGIC (0x5a544e01) and consists of a
+  standard signal frame header followed by a struct zt_context specifying
+  the number of ZTn registers supported by the system, then zt_context.nregs
+  blocks of 64 bytes of data per register.
+
+
+5.  Signal return
+-----------------
+
+When returning from a signal handler:
+
+* If there is no za_context record in the signal frame, or if the record is
+  present but contains no register data as described in the previous section,
+  then ZA is disabled.
+
+* If za_context is present in the signal frame and contains matrix data then
+  PSTATE.ZA is set to 1 and ZA is populated with the specified data.
+
+* The vector length cannot be changed via signal return.  If za_context.vl in
+  the signal frame does not match the current vector length, the signal return
+  attempt is treated as illegal, resulting in a forced SIGSEGV.
+
+* If ZTn is not supported or PSTATE.ZA==0 then it is illegal to have a
+  signal frame record for ZTn, resulting in a forced SIGSEGV.
+
+
+6.  prctl extensions
+--------------------
+
+Some new prctl() calls are added to allow programs to manage the SME vector
+length:
+
+prctl(PR_SME_SET_VL, unsigned long arg)
+
+    Sets the vector length of the calling thread and related flags, where
+    arg == vl | flags.  Other threads of the calling process are unaffected.
+
+    vl is the desired vector length, where sve_vl_valid(vl) must be true.
+
+    flags:
+
+	PR_SME_VL_INHERIT
+
+	    Inherit the current vector length across execve().  Otherwise, the
+	    vector length is reset to the system default at execve().  (See
+	    Section 9.)
+
+	PR_SME_SET_VL_ONEXEC
+
+	    Defer the requested vector length change until the next execve()
+	    performed by this thread.
+
+	    The effect is equivalent to implicit execution of the following
+	    call immediately after the next execve() (if any) by the thread:
+
+		prctl(PR_SME_SET_VL, arg & ~PR_SME_SET_VL_ONEXEC)
+
+	    This allows launching of a new program with a different vector
+	    length, while avoiding runtime side effects in the caller.
+
+	    Without PR_SME_SET_VL_ONEXEC, the requested change takes effect
+	    immediately.
+
+
+    Return value: a nonnegative on success, or a negative value on error:
+	EINVAL: SME not supported, invalid vector length requested, or
+	    invalid flags.
+
+
+    On success:
+
+    * Either the calling thread's vector length or the deferred vector length
+      to be applied at the next execve() by the thread (dependent on whether
+      PR_SME_SET_VL_ONEXEC is present in arg), is set to the largest value
+      supported by the system that is less than or equal to vl.  If vl ==
+      SVE_VL_MAX, the value set will be the largest value supported by the
+      system.
+
+    * Any previously outstanding deferred vector length change in the calling
+      thread is cancelled.
+
+    * The returned value describes the resulting configuration, encoded as for
+      PR_SME_GET_VL.  The vector length reported in this value is the new
+      current vector length for this thread if PR_SME_SET_VL_ONEXEC was not
+      present in arg; otherwise, the reported vector length is the deferred
+      vector length that will be applied at the next execve() by the calling
+      thread.
+
+    * Changing the vector length causes all of ZA, ZTn, P0..P15, FFR and all
+      bits of Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
+      unspecified, including both streaming and non-streaming SVE state.
+      Calling PR_SME_SET_VL with vl equal to the thread's current vector
+      length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag,
+      does not constitute a change to the vector length for this purpose.
+
+    * Changing the vector length causes PSTATE.ZA and PSTATE.SM to be cleared.
+      Calling PR_SME_SET_VL with vl equal to the thread's current vector
+      length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag,
+      does not constitute a change to the vector length for this purpose.
+
+
+prctl(PR_SME_GET_VL)
+
+    Gets the vector length of the calling thread.
+
+    The following flag may be OR-ed into the result:
+
+	PR_SME_VL_INHERIT
+
+	    Vector length will be inherited across execve().
+
+    There is no way to determine whether there is an outstanding deferred
+    vector length change (which would only normally be the case between a
+    fork() or vfork() and the corresponding execve() in typical use).
+
+    To extract the vector length from the result, bitwise and it with
+    PR_SME_VL_LEN_MASK.
+
+    Return value: a nonnegative value on success, or a negative value on error:
+	EINVAL: SME not supported.
+
+
+7.  ptrace extensions
+---------------------
+
+* A new regset NT_ARM_SSVE is defined for access to streaming mode SVE
+  state via PTRACE_GETREGSET and  PTRACE_SETREGSET, this is documented in
+  sve.rst.
+
+* A new regset NT_ARM_ZA is defined for ZA state for access to ZA state via
+  PTRACE_GETREGSET and PTRACE_SETREGSET.
+
+  Refer to [2] for definitions.
+
+The regset data starts with struct user_za_header, containing:
+
+    size
+
+	Size of the complete regset, in bytes.
+	This depends on vl and possibly on other things in the future.
+
+	If a call to PTRACE_GETREGSET requests less data than the value of
+	size, the caller can allocate a larger buffer and retry in order to
+	read the complete regset.
+
+    max_size
+
+	Maximum size in bytes that the regset can grow to for the target
+	thread.  The regset won't grow bigger than this even if the target
+	thread changes its vector length etc.
+
+    vl
+
+	Target thread's current streaming vector length, in bytes.
+
+    max_vl
+
+	Maximum possible streaming vector length for the target thread.
+
+    flags
+
+	Zero or more of the following flags, which have the same
+	meaning and behaviour as the corresponding PR_SET_VL_* flags:
+
+	    SME_PT_VL_INHERIT
+
+	    SME_PT_VL_ONEXEC (SETREGSET only).
+
+* The effects of changing the vector length and/or flags are equivalent to
+  those documented for PR_SME_SET_VL.
+
+  The caller must make a further GETREGSET call if it needs to know what VL is
+  actually set by SETREGSET, unless is it known in advance that the requested
+  VL is supported.
+
+* The size and layout of the payload depends on the header fields.  The
+  SME_PT_ZA_*() macros are provided to facilitate access to the data.
+
+* In either case, for SETREGSET it is permissible to omit the payload, in which
+  case the vector length and flags are changed and PSTATE.ZA is set to 0
+  (along with any consequences of those changes).  If a payload is provided
+  then PSTATE.ZA will be set to 1.
+
+* For SETREGSET, if the requested VL is not supported, the effect will be the
+  same as if the payload were omitted, except that an EIO error is reported.
+  No attempt is made to translate the payload data to the correct layout
+  for the vector length actually set.  It is up to the caller to translate the
+  payload layout for the actual VL and retry.
+
+* The effect of writing a partial, incomplete payload is unspecified.
+
+* A new regset NT_ARM_ZT is defined for access to ZTn state via
+  PTRACE_GETREGSET and PTRACE_SETREGSET.
+
+* The NT_ARM_ZT regset consists of a single 512 bit register.
+
+* When PSTATE.ZA==0 reads of NT_ARM_ZT will report all bits of ZTn as 0.
+
+* Writes to NT_ARM_ZT will set PSTATE.ZA to 1.
+
+
+8.  ELF coredump extensions
+---------------------------
+
+* NT_ARM_SSVE notes will be added to each coredump for
+  each thread of the dumped process.  The contents will be equivalent to the
+  data that would have been read if a PTRACE_GETREGSET of the corresponding
+  type were executed for each thread when the coredump was generated.
+
+* A NT_ARM_ZA note will be added to each coredump for each thread of the
+  dumped process.  The contents will be equivalent to the data that would have
+  been read if a PTRACE_GETREGSET of NT_ARM_ZA were executed for each thread
+  when the coredump was generated.
+
+* A NT_ARM_ZT note will be added to each coredump for each thread of the
+  dumped process.  The contents will be equivalent to the data that would have
+  been read if a PTRACE_GETREGSET of NT_ARM_ZT were executed for each thread
+  when the coredump was generated.
+
+* The NT_ARM_TLS note will be extended to two registers, the second register
+  will contain TPIDR2_EL0 on systems that support SME and will be read as
+  zero with writes ignored otherwise.
+
+9.  System runtime configuration
+--------------------------------
+
+* To mitigate the ABI impact of expansion of the signal frame, a policy
+  mechanism is provided for administrators, distro maintainers and developers
+  to set the default vector length for userspace processes:
+
+/proc/sys/abi/sme_default_vector_length
+
+    Writing the text representation of an integer to this file sets the system
+    default vector length to the specified value, unless the value is greater
+    than the maximum vector length supported by the system in which case the
+    default vector length is set to that maximum.
+
+    The result can be determined by reopening the file and reading its
+    contents.
+
+    At boot, the default vector length is initially set to 32 or the maximum
+    supported vector length, whichever is smaller and supported.  This
+    determines the initial vector length of the init process (PID 1).
+
+    Reading this file returns the current system default vector length.
+
+* At every execve() call, the new vector length of the new process is set to
+  the system default vector length, unless
+
+    * PR_SME_VL_INHERIT (or equivalently SME_PT_VL_INHERIT) is set for the
+      calling thread, or
+
+    * a deferred vector length change is pending, established via the
+      PR_SME_SET_VL_ONEXEC flag (or SME_PT_VL_ONEXEC).
+
+* Modifying the system default vector length does not affect the vector length
+  of any existing process or thread that does not make an execve() call.
+
+
+Appendix A.  SME programmer's model (informative)
+=================================================
+
+This section provides a minimal description of the additions made by SME to the
+ARMv8-A programmer's model that are relevant to this document.
+
+Note: This section is for information only and not intended to be complete or
+to replace any architectural specification.
+
+A.1.  Registers
+---------------
+
+In A64 state, SME adds the following:
+
+* A new mode, streaming mode, in which a subset of the normal FPSIMD and SVE
+  features are available.  When supported EL0 software may enter and leave
+  streaming mode at any time.
+
+  For best system performance it is strongly encouraged for software to enable
+  streaming mode only when it is actively being used.
+
+* A new vector length controlling the size of ZA and the Z registers when in
+  streaming mode, separately to the vector length used for SVE when not in
+  streaming mode.  There is no requirement that either the currently selected
+  vector length or the set of vector lengths supported for the two modes in
+  a given system have any relationship.  The streaming mode vector length
+  is referred to as SVL.
+
+* A new ZA matrix register.  This is a square matrix of SVLxSVL bits.  Most
+  operations on ZA require that streaming mode be enabled but ZA can be
+  enabled without streaming mode in order to load, save and retain data.
+
+  For best system performance it is strongly encouraged for software to enable
+  ZA only when it is actively being used.
+
+* A new ZT0 register is introduced when SME2 is present. This is a 512 bit
+  register which is accessible when PSTATE.ZA is set, as ZA itself is.
+
+* Two new 1 bit fields in PSTATE which may be controlled via the SMSTART and
+  SMSTOP instructions or by access to the SVCR system register:
+
+  * PSTATE.ZA, if this is 1 then the ZA matrix is accessible and has valid
+    data while if it is 0 then ZA can not be accessed.  When PSTATE.ZA is
+    changed from 0 to 1 all bits in ZA are cleared.
+
+  * PSTATE.SM, if this is 1 then the PE is in streaming mode.  When the value
+    of PSTATE.SM is changed then it is implementation defined if the subset
+    of the floating point register bits valid in both modes may be retained.
+    Any other bits will be cleared.
+
+
+References
+==========
+
+[1] arch/arm64/include/uapi/asm/sigcontext.h
+    AArch64 Linux signal ABI definitions
+
+[2] arch/arm64/include/uapi/asm/ptrace.h
+    AArch64 Linux ptrace ABI definitions
+
+[3] Documentation/arch/arm64/cpu-feature-registers.rst
diff --git a/Documentation/arch/arm64/sve.rst b/Documentation/arch/arm64/sve.rst
new file mode 100644
index 0000000000000..0d9a426e9f858
--- /dev/null
+++ b/Documentation/arch/arm64/sve.rst
@@ -0,0 +1,616 @@
+===================================================
+Scalable Vector Extension support for AArch64 Linux
+===================================================
+
+Author: Dave Martin <Dave.Martin@arm.com>
+
+Date:   4 August 2017
+
+This document outlines briefly the interface provided to userspace by Linux in
+order to support use of the ARM Scalable Vector Extension (SVE), including
+interactions with Streaming SVE mode added by the Scalable Matrix Extension
+(SME).
+
+This is an outline of the most important features and issues only and not
+intended to be exhaustive.
+
+This document does not aim to describe the SVE architecture or programmer's
+model.  To aid understanding, a minimal description of relevant programmer's
+model features for SVE is included in Appendix A.
+
+
+1.  General
+-----------
+
+* SVE registers Z0..Z31, P0..P15 and FFR and the current vector length VL, are
+  tracked per-thread.
+
+* In streaming mode FFR is not accessible unless HWCAP2_SME_FA64 is present
+  in the system, when it is not supported and these interfaces are used to
+  access streaming mode FFR is read and written as zero.
+
+* The presence of SVE is reported to userspace via HWCAP_SVE in the aux vector
+  AT_HWCAP entry.  Presence of this flag implies the presence of the SVE
+  instructions and registers, and the Linux-specific system interfaces
+  described in this document.  SVE is reported in /proc/cpuinfo as "sve".
+
+* Support for the execution of SVE instructions in userspace can also be
+  detected by reading the CPU ID register ID_AA64PFR0_EL1 using an MRS
+  instruction, and checking that the value of the SVE field is nonzero. [3]
+
+  It does not guarantee the presence of the system interfaces described in the
+  following sections: software that needs to verify that those interfaces are
+  present must check for HWCAP_SVE instead.
+
+* On hardware that supports the SVE2 extensions, HWCAP2_SVE2 will also
+  be reported in the AT_HWCAP2 aux vector entry.  In addition to this,
+  optional extensions to SVE2 may be reported by the presence of:
+
+	HWCAP2_SVE2
+	HWCAP2_SVEAES
+	HWCAP2_SVEPMULL
+	HWCAP2_SVEBITPERM
+	HWCAP2_SVESHA3
+	HWCAP2_SVESM4
+	HWCAP2_SVE2P1
+
+  This list may be extended over time as the SVE architecture evolves.
+
+  These extensions are also reported via the CPU ID register ID_AA64ZFR0_EL1,
+  which userspace can read using an MRS instruction.  See elf_hwcaps.txt and
+  cpu-feature-registers.txt for details.
+
+* On hardware that supports the SME extensions, HWCAP2_SME will also be
+  reported in the AT_HWCAP2 aux vector entry.  Among other things SME adds
+  streaming mode which provides a subset of the SVE feature set using a
+  separate SME vector length and the same Z/V registers.  See sme.rst
+  for more details.
+
+* Debuggers should restrict themselves to interacting with the target via the
+  NT_ARM_SVE regset.  The recommended way of detecting support for this regset
+  is to connect to a target process first and then attempt a
+  ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov).  Note that when SME is
+  present and streaming SVE mode is in use the FPSIMD subset of registers
+  will be read via NT_ARM_SVE and NT_ARM_SVE writes will exit streaming mode
+  in the target.
+
+* Whenever SVE scalable register values (Zn, Pn, FFR) are exchanged in memory
+  between userspace and the kernel, the register value is encoded in memory in
+  an endianness-invariant layout, with bits [(8 * i + 7) : (8 * i)] encoded at
+  byte offset i from the start of the memory representation.  This affects for
+  example the signal frame (struct sve_context) and ptrace interface
+  (struct user_sve_header) and associated data.
+
+  Beware that on big-endian systems this results in a different byte order than
+  for the FPSIMD V-registers, which are stored as single host-endian 128-bit
+  values, with bits [(127 - 8 * i) : (120 - 8 * i)] of the register encoded at
+  byte offset i.  (struct fpsimd_context, struct user_fpsimd_state).
+
+
+2.  Vector length terminology
+-----------------------------
+
+The size of an SVE vector (Z) register is referred to as the "vector length".
+
+To avoid confusion about the units used to express vector length, the kernel
+adopts the following conventions:
+
+* Vector length (VL) = size of a Z-register in bytes
+
+* Vector quadwords (VQ) = size of a Z-register in units of 128 bits
+
+(So, VL = 16 * VQ.)
+
+The VQ convention is used where the underlying granularity is important, such
+as in data structure definitions.  In most other situations, the VL convention
+is used.  This is consistent with the meaning of the "VL" pseudo-register in
+the SVE instruction set architecture.
+
+
+3.  System call behaviour
+-------------------------
+
+* On syscall, V0..V31 are preserved (as without SVE).  Thus, bits [127:0] of
+  Z0..Z31 are preserved.  All other bits of Z0..Z31, and all of P0..P15 and FFR
+  become zero on return from a syscall.
+
+* The SVE registers are not used to pass arguments to or receive results from
+  any syscall.
+
+* In practice the affected registers/bits will be preserved or will be replaced
+  with zeros on return from a syscall, but userspace should not make
+  assumptions about this.  The kernel behaviour may vary on a case-by-case
+  basis.
+
+* All other SVE state of a thread, including the currently configured vector
+  length, the state of the PR_SVE_VL_INHERIT flag, and the deferred vector
+  length (if any), is preserved across all syscalls, subject to the specific
+  exceptions for execve() described in section 6.
+
+  In particular, on return from a fork() or clone(), the parent and new child
+  process or thread share identical SVE configuration, matching that of the
+  parent before the call.
+
+
+4.  Signal handling
+-------------------
+
+* A new signal frame record sve_context encodes the SVE registers on signal
+  delivery. [1]
+
+* This record is supplementary to fpsimd_context.  The FPSR and FPCR registers
+  are only present in fpsimd_context.  For convenience, the content of V0..V31
+  is duplicated between sve_context and fpsimd_context.
+
+* The record contains a flag field which includes a flag SVE_SIG_FLAG_SM which
+  if set indicates that the thread is in streaming mode and the vector length
+  and register data (if present) describe the streaming SVE data and vector
+  length.
+
+* The signal frame record for SVE always contains basic metadata, in particular
+  the thread's vector length (in sve_context.vl).
+
+* The SVE registers may or may not be included in the record, depending on
+  whether the registers are live for the thread.  The registers are present if
+  and only if:
+  sve_context.head.size >= SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl)).
+
+* If the registers are present, the remainder of the record has a vl-dependent
+  size and layout.  Macros SVE_SIG_* are defined [1] to facilitate access to
+  the members.
+
+* Each scalable register (Zn, Pn, FFR) is stored in an endianness-invariant
+  layout, with bits [(8 * i + 7) : (8 * i)] stored at byte offset i from the
+  start of the register's representation in memory.
+
+* If the SVE context is too big to fit in sigcontext.__reserved[], then extra
+  space is allocated on the stack, an extra_context record is written in
+  __reserved[] referencing this space.  sve_context is then written in the
+  extra space.  Refer to [1] for further details about this mechanism.
+
+
+5.  Signal return
+-----------------
+
+When returning from a signal handler:
+
+* If there is no sve_context record in the signal frame, or if the record is
+  present but contains no register data as described in the previous section,
+  then the SVE registers/bits become non-live and take unspecified values.
+
+* If sve_context is present in the signal frame and contains full register
+  data, the SVE registers become live and are populated with the specified
+  data.  However, for backward compatibility reasons, bits [127:0] of Z0..Z31
+  are always restored from the corresponding members of fpsimd_context.vregs[]
+  and not from sve_context.  The remaining bits are restored from sve_context.
+
+* Inclusion of fpsimd_context in the signal frame remains mandatory,
+  irrespective of whether sve_context is present or not.
+
+* The vector length cannot be changed via signal return.  If sve_context.vl in
+  the signal frame does not match the current vector length, the signal return
+  attempt is treated as illegal, resulting in a forced SIGSEGV.
+
+* It is permitted to enter or leave streaming mode by setting or clearing
+  the SVE_SIG_FLAG_SM flag but applications should take care to ensure that
+  when doing so sve_context.vl and any register data are appropriate for the
+  vector length in the new mode.
+
+
+6.  prctl extensions
+--------------------
+
+Some new prctl() calls are added to allow programs to manage the SVE vector
+length:
+
+prctl(PR_SVE_SET_VL, unsigned long arg)
+
+    Sets the vector length of the calling thread and related flags, where
+    arg == vl | flags.  Other threads of the calling process are unaffected.
+
+    vl is the desired vector length, where sve_vl_valid(vl) must be true.
+
+    flags:
+
+	PR_SVE_VL_INHERIT
+
+	    Inherit the current vector length across execve().  Otherwise, the
+	    vector length is reset to the system default at execve().  (See
+	    Section 9.)
+
+	PR_SVE_SET_VL_ONEXEC
+
+	    Defer the requested vector length change until the next execve()
+	    performed by this thread.
+
+	    The effect is equivalent to implicit execution of the following
+	    call immediately after the next execve() (if any) by the thread:
+
+		prctl(PR_SVE_SET_VL, arg & ~PR_SVE_SET_VL_ONEXEC)
+
+	    This allows launching of a new program with a different vector
+	    length, while avoiding runtime side effects in the caller.
+
+
+	    Without PR_SVE_SET_VL_ONEXEC, the requested change takes effect
+	    immediately.
+
+
+    Return value: a nonnegative on success, or a negative value on error:
+	EINVAL: SVE not supported, invalid vector length requested, or
+	    invalid flags.
+
+
+    On success:
+
+    * Either the calling thread's vector length or the deferred vector length
+      to be applied at the next execve() by the thread (dependent on whether
+      PR_SVE_SET_VL_ONEXEC is present in arg), is set to the largest value
+      supported by the system that is less than or equal to vl.  If vl ==
+      SVE_VL_MAX, the value set will be the largest value supported by the
+      system.
+
+    * Any previously outstanding deferred vector length change in the calling
+      thread is cancelled.
+
+    * The returned value describes the resulting configuration, encoded as for
+      PR_SVE_GET_VL.  The vector length reported in this value is the new
+      current vector length for this thread if PR_SVE_SET_VL_ONEXEC was not
+      present in arg; otherwise, the reported vector length is the deferred
+      vector length that will be applied at the next execve() by the calling
+      thread.
+
+    * Changing the vector length causes all of P0..P15, FFR and all bits of
+      Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
+      unspecified.  Calling PR_SVE_SET_VL with vl equal to the thread's current
+      vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC
+      flag, does not constitute a change to the vector length for this purpose.
+
+
+prctl(PR_SVE_GET_VL)
+
+    Gets the vector length of the calling thread.
+
+    The following flag may be OR-ed into the result:
+
+	PR_SVE_VL_INHERIT
+
+	    Vector length will be inherited across execve().
+
+    There is no way to determine whether there is an outstanding deferred
+    vector length change (which would only normally be the case between a
+    fork() or vfork() and the corresponding execve() in typical use).
+
+    To extract the vector length from the result, bitwise and it with
+    PR_SVE_VL_LEN_MASK.
+
+    Return value: a nonnegative value on success, or a negative value on error:
+	EINVAL: SVE not supported.
+
+
+7.  ptrace extensions
+---------------------
+
+* New regsets NT_ARM_SVE and NT_ARM_SSVE are defined for use with
+  PTRACE_GETREGSET and PTRACE_SETREGSET. NT_ARM_SSVE describes the
+  streaming mode SVE registers and NT_ARM_SVE describes the
+  non-streaming mode SVE registers.
+
+  In this description a register set is referred to as being "live" when
+  the target is in the appropriate streaming or non-streaming mode and is
+  using data beyond the subset shared with the FPSIMD Vn registers.
+
+  Refer to [2] for definitions.
+
+The regset data starts with struct user_sve_header, containing:
+
+    size
+
+	Size of the complete regset, in bytes.
+	This depends on vl and possibly on other things in the future.
+
+	If a call to PTRACE_GETREGSET requests less data than the value of
+	size, the caller can allocate a larger buffer and retry in order to
+	read the complete regset.
+
+    max_size
+
+	Maximum size in bytes that the regset can grow to for the target
+	thread.  The regset won't grow bigger than this even if the target
+	thread changes its vector length etc.
+
+    vl
+
+	Target thread's current vector length, in bytes.
+
+    max_vl
+
+	Maximum possible vector length for the target thread.
+
+    flags
+
+	at most one of
+
+	    SVE_PT_REGS_FPSIMD
+
+		SVE registers are not live (GETREGSET) or are to be made
+		non-live (SETREGSET).
+
+		The payload is of type struct user_fpsimd_state, with the same
+		meaning as for NT_PRFPREG, starting at offset
+		SVE_PT_FPSIMD_OFFSET from the start of user_sve_header.
+
+		Extra data might be appended in the future: the size of the
+		payload should be obtained using SVE_PT_FPSIMD_SIZE(vq, flags).
+
+		vq should be obtained using sve_vq_from_vl(vl).
+
+		or
+
+	    SVE_PT_REGS_SVE
+
+		SVE registers are live (GETREGSET) or are to be made live
+		(SETREGSET).
+
+		The payload contains the SVE register data, starting at offset
+		SVE_PT_SVE_OFFSET from the start of user_sve_header, and with
+		size SVE_PT_SVE_SIZE(vq, flags);
+
+	... OR-ed with zero or more of the following flags, which have the same
+	meaning and behaviour as the corresponding PR_SET_VL_* flags:
+
+	    SVE_PT_VL_INHERIT
+
+	    SVE_PT_VL_ONEXEC (SETREGSET only).
+
+	If neither FPSIMD nor SVE flags are provided then no register
+	payload is available, this is only possible when SME is implemented.
+
+
+* The effects of changing the vector length and/or flags are equivalent to
+  those documented for PR_SVE_SET_VL.
+
+  The caller must make a further GETREGSET call if it needs to know what VL is
+  actually set by SETREGSET, unless is it known in advance that the requested
+  VL is supported.
+
+* In the SVE_PT_REGS_SVE case, the size and layout of the payload depends on
+  the header fields.  The SVE_PT_SVE_*() macros are provided to facilitate
+  access to the members.
+
+* In either case, for SETREGSET it is permissible to omit the payload, in which
+  case only the vector length and flags are changed (along with any
+  consequences of those changes).
+
+* In systems supporting SME when in streaming mode a GETREGSET for
+  NT_REG_SVE will return only the user_sve_header with no register data,
+  similarly a GETREGSET for NT_REG_SSVE will not return any register data
+  when not in streaming mode.
+
+* A GETREGSET for NT_ARM_SSVE will never return SVE_PT_REGS_FPSIMD.
+
+* For SETREGSET, if an SVE_PT_REGS_SVE payload is present and the
+  requested VL is not supported, the effect will be the same as if the
+  payload were omitted, except that an EIO error is reported.  No
+  attempt is made to translate the payload data to the correct layout
+  for the vector length actually set.  The thread's FPSIMD state is
+  preserved, but the remaining bits of the SVE registers become
+  unspecified.  It is up to the caller to translate the payload layout
+  for the actual VL and retry.
+
+* Where SME is implemented it is not possible to GETREGSET the register
+  state for normal SVE when in streaming mode, nor the streaming mode
+  register state when in normal mode, regardless of the implementation defined
+  behaviour of the hardware for sharing data between the two modes.
+
+* Any SETREGSET of NT_ARM_SVE will exit streaming mode if the target was in
+  streaming mode and any SETREGSET of NT_ARM_SSVE will enter streaming mode
+  if the target was not in streaming mode.
+
+* The effect of writing a partial, incomplete payload is unspecified.
+
+
+8.  ELF coredump extensions
+---------------------------
+
+* NT_ARM_SVE and NT_ARM_SSVE notes will be added to each coredump for
+  each thread of the dumped process.  The contents will be equivalent to the
+  data that would have been read if a PTRACE_GETREGSET of the corresponding
+  type were executed for each thread when the coredump was generated.
+
+9.  System runtime configuration
+--------------------------------
+
+* To mitigate the ABI impact of expansion of the signal frame, a policy
+  mechanism is provided for administrators, distro maintainers and developers
+  to set the default vector length for userspace processes:
+
+/proc/sys/abi/sve_default_vector_length
+
+    Writing the text representation of an integer to this file sets the system
+    default vector length to the specified value, unless the value is greater
+    than the maximum vector length supported by the system in which case the
+    default vector length is set to that maximum.
+
+    The result can be determined by reopening the file and reading its
+    contents.
+
+    At boot, the default vector length is initially set to 64 or the maximum
+    supported vector length, whichever is smaller.  This determines the initial
+    vector length of the init process (PID 1).
+
+    Reading this file returns the current system default vector length.
+
+* At every execve() call, the new vector length of the new process is set to
+  the system default vector length, unless
+
+    * PR_SVE_VL_INHERIT (or equivalently SVE_PT_VL_INHERIT) is set for the
+      calling thread, or
+
+    * a deferred vector length change is pending, established via the
+      PR_SVE_SET_VL_ONEXEC flag (or SVE_PT_VL_ONEXEC).
+
+* Modifying the system default vector length does not affect the vector length
+  of any existing process or thread that does not make an execve() call.
+
+10.  Perf extensions
+--------------------------------
+
+* The arm64 specific DWARF standard [5] added the VG (Vector Granule) register
+  at index 46. This register is used for DWARF unwinding when variable length
+  SVE registers are pushed onto the stack.
+
+* Its value is equivalent to the current SVE vector length (VL) in bits divided
+  by 64.
+
+* The value is included in Perf samples in the regs[46] field if
+  PERF_SAMPLE_REGS_USER is set and the sample_regs_user mask has bit 46 set.
+
+* The value is the current value at the time the sample was taken, and it can
+  change over time.
+
+* If the system doesn't support SVE when perf_event_open is called with these
+  settings, the event will fail to open.
+
+Appendix A.  SVE programmer's model (informative)
+=================================================
+
+This section provides a minimal description of the additions made by SVE to the
+ARMv8-A programmer's model that are relevant to this document.
+
+Note: This section is for information only and not intended to be complete or
+to replace any architectural specification.
+
+A.1.  Registers
+---------------
+
+In A64 state, SVE adds the following:
+
+* 32 8VL-bit vector registers Z0..Z31
+  For each Zn, Zn bits [127:0] alias the ARMv8-A vector register Vn.
+
+  A register write using a Vn register name zeros all bits of the corresponding
+  Zn except for bits [127:0].
+
+* 16 VL-bit predicate registers P0..P15
+
+* 1 VL-bit special-purpose predicate register FFR (the "first-fault register")
+
+* a VL "pseudo-register" that determines the size of each vector register
+
+  The SVE instruction set architecture provides no way to write VL directly.
+  Instead, it can be modified only by EL1 and above, by writing appropriate
+  system registers.
+
+* The value of VL can be configured at runtime by EL1 and above:
+  16 <= VL <= VLmax, where VL must be a multiple of 16.
+
+* The maximum vector length is determined by the hardware:
+  16 <= VLmax <= 256.
+
+  (The SVE architecture specifies 256, but permits future architecture
+  revisions to raise this limit.)
+
+* FPSR and FPCR are retained from ARMv8-A, and interact with SVE floating-point
+  operations in a similar way to the way in which they interact with ARMv8
+  floating-point operations::
+
+         8VL-1                       128               0  bit index
+        +----          ////            -----------------+
+     Z0 |                               :       V0      |
+      :                                          :
+     Z7 |                               :       V7      |
+     Z8 |                               :     * V8      |
+      :                                       :  :
+    Z15 |                               :     *V15      |
+    Z16 |                               :      V16      |
+      :                                          :
+    Z31 |                               :      V31      |
+        +----          ////            -----------------+
+                                                 31    0
+         VL-1                  0                +-------+
+        +----       ////      --+          FPSR |       |
+     P0 |                       |               +-------+
+      : |                       |         *FPCR |       |
+    P15 |                       |               +-------+
+        +----       ////      --+
+    FFR |                       |               +-----+
+        +----       ////      --+            VL |     |
+                                                +-----+
+
+(*) callee-save:
+    This only applies to bits [63:0] of Z-/V-registers.
+    FPCR contains callee-save and caller-save bits.  See [4] for details.
+
+
+A.2.  Procedure call standard
+-----------------------------
+
+The ARMv8-A base procedure call standard is extended as follows with respect to
+the additional SVE register state:
+
+* All SVE register bits that are not shared with FP/SIMD are caller-save.
+
+* Z8 bits [63:0] .. Z15 bits [63:0] are callee-save.
+
+  This follows from the way these bits are mapped to V8..V15, which are caller-
+  save in the base procedure call standard.
+
+
+Appendix B.  ARMv8-A FP/SIMD programmer's model
+===============================================
+
+Note: This section is for information only and not intended to be complete or
+to replace any architectural specification.
+
+Refer to [4] for more information.
+
+ARMv8-A defines the following floating-point / SIMD register state:
+
+* 32 128-bit vector registers V0..V31
+* 2 32-bit status/control registers FPSR, FPCR
+
+::
+
+         127           0  bit index
+        +---------------+
+     V0 |               |
+      : :               :
+     V7 |               |
+   * V8 |               |
+   :  : :               :
+   *V15 |               |
+    V16 |               |
+      : :               :
+    V31 |               |
+        +---------------+
+
+                 31    0
+                +-------+
+           FPSR |       |
+                +-------+
+          *FPCR |       |
+                +-------+
+
+(*) callee-save:
+    This only applies to bits [63:0] of V-registers.
+    FPCR contains a mixture of callee-save and caller-save bits.
+
+
+References
+==========
+
+[1] arch/arm64/include/uapi/asm/sigcontext.h
+    AArch64 Linux signal ABI definitions
+
+[2] arch/arm64/include/uapi/asm/ptrace.h
+    AArch64 Linux ptrace ABI definitions
+
+[3] Documentation/arch/arm64/cpu-feature-registers.rst
+
+[4] ARM IHI0055C
+    http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf
+    http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
+    Procedure Call Standard for the ARM 64-bit Architecture (AArch64)
+
+[5] https://github.com/ARM-software/abi-aa/blob/main/aadwarf64/aadwarf64.rst
diff --git a/Documentation/arch/arm64/tagged-address-abi.rst b/Documentation/arch/arm64/tagged-address-abi.rst
new file mode 100644
index 0000000000000..fe24a3f158c57
--- /dev/null
+++ b/Documentation/arch/arm64/tagged-address-abi.rst
@@ -0,0 +1,179 @@
+==========================
+AArch64 TAGGED ADDRESS ABI
+==========================
+
+Authors: Vincenzo Frascino <vincenzo.frascino@arm.com>
+         Catalin Marinas <catalin.marinas@arm.com>
+
+Date: 21 August 2019
+
+This document describes the usage and semantics of the Tagged Address
+ABI on AArch64 Linux.
+
+1. Introduction
+---------------
+
+On AArch64 the ``TCR_EL1.TBI0`` bit is set by default, allowing
+userspace (EL0) to perform memory accesses through 64-bit pointers with
+a non-zero top byte. This document describes the relaxation of the
+syscall ABI that allows userspace to pass certain tagged pointers to
+kernel syscalls.
+
+2. AArch64 Tagged Address ABI
+-----------------------------
+
+From the kernel syscall interface perspective and for the purposes of
+this document, a "valid tagged pointer" is a pointer with a potentially
+non-zero top-byte that references an address in the user process address
+space obtained in one of the following ways:
+
+- ``mmap()`` syscall where either:
+
+  - flags have the ``MAP_ANONYMOUS`` bit set or
+  - the file descriptor refers to a regular file (including those
+    returned by ``memfd_create()``) or ``/dev/zero``
+
+- ``brk()`` syscall (i.e. the heap area between the initial location of
+  the program break at process creation and its current location).
+
+- any memory mapped by the kernel in the address space of the process
+  during creation and with the same restrictions as for ``mmap()`` above
+  (e.g. data, bss, stack).
+
+The AArch64 Tagged Address ABI has two stages of relaxation depending on
+how the user addresses are used by the kernel:
+
+1. User addresses not accessed by the kernel but used for address space
+   management (e.g. ``mprotect()``, ``madvise()``). The use of valid
+   tagged pointers in this context is allowed with these exceptions:
+
+   - ``brk()``, ``mmap()`` and the ``new_address`` argument to
+     ``mremap()`` as these have the potential to alias with existing
+     user addresses.
+
+     NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for the ``brk()``,
+     ``mmap()`` and ``mremap()`` system calls.
+
+   - The ``range.start``, ``start`` and ``dst`` arguments to the
+     ``UFFDIO_*`` ``ioctl()``s used on a file descriptor obtained from
+     ``userfaultfd()``, as fault addresses subsequently obtained by reading
+     the file descriptor will be untagged, which may otherwise confuse
+     tag-unaware programs.
+
+     NOTE: This behaviour changed in v5.14 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for this system call.
+
+2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
+   relaxation is disabled by default and the application thread needs to
+   explicitly enable it via ``prctl()`` as follows:
+
+   - ``PR_SET_TAGGED_ADDR_CTRL``: enable or disable the AArch64 Tagged
+     Address ABI for the calling thread.
+
+     The ``(unsigned int) arg2`` argument is a bit mask describing the
+     control mode used:
+
+     - ``PR_TAGGED_ADDR_ENABLE``: enable AArch64 Tagged Address ABI.
+       Default status is disabled.
+
+     Arguments ``arg3``, ``arg4``, and ``arg5`` must be 0.
+
+   - ``PR_GET_TAGGED_ADDR_CTRL``: get the status of the AArch64 Tagged
+     Address ABI for the calling thread.
+
+     Arguments ``arg2``, ``arg3``, ``arg4``, and ``arg5`` must be 0.
+
+   The ABI properties described above are thread-scoped, inherited on
+   clone() and fork() and cleared on exec().
+
+   Calling ``prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, 0, 0, 0)``
+   returns ``-EINVAL`` if the AArch64 Tagged Address ABI is globally
+   disabled by ``sysctl abi.tagged_addr_disabled=1``. The default
+   ``sysctl abi.tagged_addr_disabled`` configuration is 0.
+
+When the AArch64 Tagged Address ABI is enabled for a thread, the
+following behaviours are guaranteed:
+
+- All syscalls except the cases mentioned in section 3 can accept any
+  valid tagged pointer.
+
+- The syscall behaviour is undefined for invalid tagged pointers: it may
+  result in an error code being returned, a (fatal) signal being raised,
+  or other modes of failure.
+
+- The syscall behaviour for a valid tagged pointer is the same as for
+  the corresponding untagged pointer.
+
+
+A definition of the meaning of tagged pointers on AArch64 can be found
+in Documentation/arch/arm64/tagged-pointers.rst.
+
+3. AArch64 Tagged Address ABI Exceptions
+-----------------------------------------
+
+The following system call parameters must be untagged regardless of the
+ABI relaxation:
+
+- ``prctl()`` other than pointers to user data either passed directly or
+  indirectly as arguments to be accessed by the kernel.
+
+- ``ioctl()`` other than pointers to user data either passed directly or
+  indirectly as arguments to be accessed by the kernel.
+
+- ``shmat()`` and ``shmdt()``.
+
+- ``brk()`` (since kernel v5.6).
+
+- ``mmap()`` (since kernel v5.6).
+
+- ``mremap()``, the ``new_address`` argument (since kernel v5.6).
+
+Any attempt to use non-zero tagged pointers may result in an error code
+being returned, a (fatal) signal being raised, or other modes of
+failure.
+
+4. Example of correct usage
+---------------------------
+.. code-block:: c
+
+   #include <stdlib.h>
+   #include <string.h>
+   #include <unistd.h>
+   #include <sys/mman.h>
+   #include <sys/prctl.h>
+   
+   #define PR_SET_TAGGED_ADDR_CTRL	55
+   #define PR_TAGGED_ADDR_ENABLE	(1UL << 0)
+   
+   #define TAG_SHIFT		56
+   
+   int main(void)
+   {
+   	int tbi_enabled = 0;
+   	unsigned long tag = 0;
+   	char *ptr;
+   
+   	/* check/enable the tagged address ABI */
+   	if (!prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, 0, 0, 0))
+   		tbi_enabled = 1;
+   
+   	/* memory allocation */
+   	ptr = mmap(NULL, sysconf(_SC_PAGE_SIZE), PROT_READ | PROT_WRITE,
+   		   MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+   	if (ptr == MAP_FAILED)
+   		return 1;
+   
+   	/* set a non-zero tag if the ABI is available */
+   	if (tbi_enabled)
+   		tag = rand() & 0xff;
+   	ptr = (char *)((unsigned long)ptr | (tag << TAG_SHIFT));
+   
+   	/* memory access to a tagged address */
+   	strcpy(ptr, "tagged pointer\n");
+   
+   	/* syscall with a tagged pointer */
+   	write(1, ptr, strlen(ptr));
+   
+   	return 0;
+   }
diff --git a/Documentation/arch/arm64/tagged-pointers.rst b/Documentation/arch/arm64/tagged-pointers.rst
new file mode 100644
index 0000000000000..81b6c2a770dd6
--- /dev/null
+++ b/Documentation/arch/arm64/tagged-pointers.rst
@@ -0,0 +1,88 @@
+=========================================
+Tagged virtual addresses in AArch64 Linux
+=========================================
+
+Author: Will Deacon <will.deacon@arm.com>
+
+Date  : 12 June 2013
+
+This document briefly describes the provision of tagged virtual
+addresses in the AArch64 translation system and their potential uses
+in AArch64 Linux.
+
+The kernel configures the translation tables so that translations made
+via TTBR0 (i.e. userspace mappings) have the top byte (bits 63:56) of
+the virtual address ignored by the translation hardware. This frees up
+this byte for application use.
+
+
+Passing tagged addresses to the kernel
+--------------------------------------
+
+All interpretation of userspace memory addresses by the kernel assumes
+an address tag of 0x00, unless the application enables the AArch64
+Tagged Address ABI explicitly
+(Documentation/arch/arm64/tagged-address-abi.rst).
+
+This includes, but is not limited to, addresses found in:
+
+ - pointer arguments to system calls, including pointers in structures
+   passed to system calls,
+
+ - the stack pointer (sp), e.g. when interpreting it to deliver a
+   signal,
+
+ - the frame pointer (x29) and frame records, e.g. when interpreting
+   them to generate a backtrace or call graph.
+
+Using non-zero address tags in any of these locations when the
+userspace application did not enable the AArch64 Tagged Address ABI may
+result in an error code being returned, a (fatal) signal being raised,
+or other modes of failure.
+
+For these reasons, when the AArch64 Tagged Address ABI is disabled,
+passing non-zero address tags to the kernel via system calls is
+forbidden, and using a non-zero address tag for sp is strongly
+discouraged.
+
+Programs maintaining a frame pointer and frame records that use non-zero
+address tags may suffer impaired or inaccurate debug and profiling
+visibility.
+
+
+Preserving tags
+---------------
+
+When delivering signals, non-zero tags are not preserved in
+siginfo.si_addr unless the flag SA_EXPOSE_TAGBITS was set in
+sigaction.sa_flags when the signal handler was installed. This means
+that signal handlers in applications making use of tags cannot rely
+on the tag information for user virtual addresses being maintained
+in these fields unless the flag was set.
+
+Due to architecture limitations, bits 63:60 of the fault address
+are not preserved in response to synchronous tag check faults
+(SEGV_MTESERR) even if SA_EXPOSE_TAGBITS was set. Applications should
+treat the values of these bits as undefined in order to accommodate
+future architecture revisions which may preserve the bits.
+
+For signals raised in response to watchpoint debug exceptions, the
+tag information will be preserved regardless of the SA_EXPOSE_TAGBITS
+flag setting.
+
+Non-zero tags are never preserved in sigcontext.fault_address
+regardless of the SA_EXPOSE_TAGBITS flag setting.
+
+The architecture prevents the use of a tagged PC, so the upper byte will
+be set to a sign-extension of bit 55 on exception return.
+
+This behaviour is maintained when the AArch64 Tagged Address ABI is
+enabled.
+
+
+Other considerations
+--------------------
+
+Special care should be taken when using tagged pointers, since it is
+likely that C compilers will not hazard two virtual addresses differing
+only in the upper byte.
diff --git a/Documentation/arch/index.rst b/Documentation/arch/index.rst
index 80ee310165843..8458b88e9b79e 100644
--- a/Documentation/arch/index.rst
+++ b/Documentation/arch/index.rst
@@ -10,8 +10,8 @@ implementation.
    :maxdepth: 2
 
    arc/index
-   ../arm/index
-   ../arm64/index
+   arm/index
+   arm64/index
    ia64/index
    ../loongarch/index
    m68k/index
diff --git a/Documentation/arch/x86/resctrl.rst b/Documentation/arch/x86/resctrl.rst
index 387ccbcb558fb..cb05d90111b4f 100644
--- a/Documentation/arch/x86/resctrl.rst
+++ b/Documentation/arch/x86/resctrl.rst
@@ -287,6 +287,13 @@ Removing a directory will move all tasks and cpus owned by the group it
 represents to the parent. Removing one of the created CTRL_MON groups
 will automatically remove all MON groups below it.
 
+Moving MON group directories to a new parent CTRL_MON group is supported
+for the purpose of changing the resource allocations of a MON group
+without impacting its monitoring data or assigned tasks. This operation
+is not allowed for MON groups which monitor CPUs. No other move
+operation is currently allowed other than simply renaming a CTRL_MON or
+MON group.
+
 All groups contain the following files:
 
 "tasks":
diff --git a/Documentation/arm/arm.rst b/Documentation/arm/arm.rst
deleted file mode 100644
index 99d660fdf73fd..0000000000000
--- a/Documentation/arm/arm.rst
+++ /dev/null
@@ -1,212 +0,0 @@
-=======================
-ARM Linux 2.6 and upper
-=======================
-
-    Please check <ftp://ftp.arm.linux.org.uk/pub/armlinux> for
-    updates.
-
-Compilation of kernel
----------------------
-
-  In order to compile ARM Linux, you will need a compiler capable of
-  generating ARM ELF code with GNU extensions.  GCC 3.3 is known to be
-  a good compiler.  Fortunately, you needn't guess.  The kernel will report
-  an error if your compiler is a recognized offender.
-
-  To build ARM Linux natively, you shouldn't have to alter the ARCH = line
-  in the top level Makefile.  However, if you don't have the ARM Linux ELF
-  tools installed as default, then you should change the CROSS_COMPILE
-  line as detailed below.
-
-  If you wish to cross-compile, then alter the following lines in the top
-  level make file::
-
-    ARCH = <whatever>
-
-  with::
-
-    ARCH = arm
-
-  and::
-
-    CROSS_COMPILE=
-
-  to::
-
-    CROSS_COMPILE=<your-path-to-your-compiler-without-gcc>
-
-  eg.::
-
-    CROSS_COMPILE=arm-linux-
-
-  Do a 'make config', followed by 'make Image' to build the kernel
-  (arch/arm/boot/Image).  A compressed image can be built by doing a
-  'make zImage' instead of 'make Image'.
-
-
-Bug reports etc
----------------
-
-  Please send patches to the patch system.  For more information, see
-  http://www.arm.linux.org.uk/developer/patches/info.php Always include some
-  explanation as to what the patch does and why it is needed.
-
-  Bug reports should be sent to linux-arm-kernel@lists.arm.linux.org.uk,
-  or submitted through the web form at
-  http://www.arm.linux.org.uk/developer/
-
-  When sending bug reports, please ensure that they contain all relevant
-  information, eg. the kernel messages that were printed before/during
-  the problem, what you were doing, etc.
-
-
-Include files
--------------
-
-  Several new include directories have been created under include/asm-arm,
-  which are there to reduce the clutter in the top-level directory.  These
-  directories, and their purpose is listed below:
-
-  ============= ==========================================================
-   `arch-*`	machine/platform specific header files
-   `hardware`	driver-internal ARM specific data structures/definitions
-   `mach`	descriptions of generic ARM to specific machine interfaces
-   `proc-*`	processor dependent header files (currently only two
-		categories)
-  ============= ==========================================================
-
-
-Machine/Platform support
-------------------------
-
-  The ARM tree contains support for a lot of different machine types.  To
-  continue supporting these differences, it has become necessary to split
-  machine-specific parts by directory.  For this, the machine category is
-  used to select which directories and files get included (we will use
-  $(MACHINE) to refer to the category)
-
-  To this end, we now have arch/arm/mach-$(MACHINE) directories which are
-  designed to house the non-driver files for a particular machine (eg, PCI,
-  memory management, architecture definitions etc).  For all future
-  machines, there should be a corresponding arch/arm/mach-$(MACHINE)/include/mach
-  directory.
-
-
-Modules
--------
-
-  Although modularisation is supported (and required for the FP emulator),
-  each module on an ARM2/ARM250/ARM3 machine when is loaded will take
-  memory up to the next 32k boundary due to the size of the pages.
-  Therefore, is modularisation on these machines really worth it?
-
-  However, ARM6 and up machines allow modules to take multiples of 4k, and
-  as such Acorn RiscPCs and other architectures using these processors can
-  make good use of modularisation.
-
-
-ADFS Image files
-----------------
-
-  You can access image files on your ADFS partitions by mounting the ADFS
-  partition, and then using the loopback device driver.  You must have
-  losetup installed.
-
-  Please note that the PCEmulator DOS partitions have a partition table at
-  the start, and as such, you will have to give '-o offset' to losetup.
-
-
-Request to developers
----------------------
-
-  When writing device drivers which include a separate assembler file, please
-  include it in with the C file, and not the arch/arm/lib directory.  This
-  allows the driver to be compiled as a loadable module without requiring
-  half the code to be compiled into the kernel image.
-
-  In general, try to avoid using assembler unless it is really necessary.  It
-  makes drivers far less easy to port to other hardware.
-
-
-ST506 hard drives
------------------
-
-  The ST506 hard drive controllers seem to be working fine (if a little
-  slowly).  At the moment they will only work off the controllers on an
-  A4x0's motherboard, but for it to work off a Podule just requires
-  someone with a podule to add the addresses for the IRQ mask and the
-  HDC base to the source.
-
-  As of 31/3/96 it works with two drives (you should get the ADFS
-  `*configure` harddrive set to 2). I've got an internal 20MB and a great
-  big external 5.25" FH 64MB drive (who could ever want more :-) ).
-
-  I've just got 240K/s off it (a dd with bs=128k); thats about half of what
-  RiscOS gets; but it's a heck of a lot better than the 50K/s I was getting
-  last week :-)
-
-  Known bug: Drive data errors can cause a hang; including cases where
-  the controller has fixed the error using ECC. (Possibly ONLY
-  in that case...hmm).
-
-
-1772 Floppy
------------
-  This also seems to work OK, but hasn't been stressed much lately.  It
-  hasn't got any code for disc change detection in there at the moment which
-  could be a bit of a problem!  Suggestions on the correct way to do this
-  are welcome.
-
-
-`CONFIG_MACH_` and `CONFIG_ARCH_`
----------------------------------
-  A change was made in 2003 to the macro names for new machines.
-  Historically, `CONFIG_ARCH_` was used for the bonafide architecture,
-  e.g. SA1100, as well as implementations of the architecture,
-  e.g. Assabet.  It was decided to change the implementation macros
-  to read `CONFIG_MACH_` for clarity.  Moreover, a retroactive fixup has
-  not been made because it would complicate patching.
-
-  Previous registrations may be found online.
-
-    <http://www.arm.linux.org.uk/developer/machines/>
-
-Kernel entry (head.S)
----------------------
-  The initial entry into the kernel is via head.S, which uses machine
-  independent code.  The machine is selected by the value of 'r1' on
-  entry, which must be kept unique.
-
-  Due to the large number of machines which the ARM port of Linux provides
-  for, we have a method to manage this which ensures that we don't end up
-  duplicating large amounts of code.
-
-  We group machine (or platform) support code into machine classes.  A
-  class typically based around one or more system on a chip devices, and
-  acts as a natural container around the actual implementations.  These
-  classes are given directories - arch/arm/mach-<class> - which contain
-  the source files and include/mach/ to support the machine class.
-
-  For example, the SA1100 class is based upon the SA1100 and SA1110 SoC
-  devices, and contains the code to support the way the on-board and off-
-  board devices are used, or the device is setup, and provides that
-  machine specific "personality."
-
-  For platforms that support device tree (DT), the machine selection is
-  controlled at runtime by passing the device tree blob to the kernel.  At
-  compile-time, support for the machine type must be selected.  This allows for
-  a single multiplatform kernel build to be used for several machine types.
-
-  For platforms that do not use device tree, this machine selection is
-  controlled by the machine type ID, which acts both as a run-time and a
-  compile-time code selection method.  You can register a new machine via the
-  web site at:
-
-    <http://www.arm.linux.org.uk/developer/machines/>
-
-  Note: Please do not register a machine type for DT-only platforms.  If your
-  platform is DT-only, you do not need a registered machine type.
-
----
-
-Russell King (15/03/2004)
diff --git a/Documentation/arm/booting.rst b/Documentation/arm/booting.rst
deleted file mode 100644
index 5974e37b3d202..0000000000000
--- a/Documentation/arm/booting.rst
+++ /dev/null
@@ -1,237 +0,0 @@
-=================
-Booting ARM Linux
-=================
-
-Author:	Russell King
-
-Date  : 18 May 2002
-
-The following documentation is relevant to 2.4.18-rmk6 and beyond.
-
-In order to boot ARM Linux, you require a boot loader, which is a small
-program that runs before the main kernel.  The boot loader is expected
-to initialise various devices, and eventually call the Linux kernel,
-passing information to the kernel.
-
-Essentially, the boot loader should provide (as a minimum) the
-following:
-
-1. Setup and initialise the RAM.
-2. Initialise one serial port.
-3. Detect the machine type.
-4. Setup the kernel tagged list.
-5. Load initramfs.
-6. Call the kernel image.
-
-
-1. Setup and initialise RAM
----------------------------
-
-Existing boot loaders:
-	MANDATORY
-New boot loaders:
-	MANDATORY
-
-The boot loader is expected to find and initialise all RAM that the
-kernel will use for volatile data storage in the system.  It performs
-this in a machine dependent manner.  (It may use internal algorithms
-to automatically locate and size all RAM, or it may use knowledge of
-the RAM in the machine, or any other method the boot loader designer
-sees fit.)
-
-
-2. Initialise one serial port
------------------------------
-
-Existing boot loaders:
-	OPTIONAL, RECOMMENDED
-New boot loaders:
-	OPTIONAL, RECOMMENDED
-
-The boot loader should initialise and enable one serial port on the
-target.  This allows the kernel serial driver to automatically detect
-which serial port it should use for the kernel console (generally
-used for debugging purposes, or communication with the target.)
-
-As an alternative, the boot loader can pass the relevant 'console='
-option to the kernel via the tagged lists specifying the port, and
-serial format options as described in
-
-       Documentation/admin-guide/kernel-parameters.rst.
-
-
-3. Detect the machine type
---------------------------
-
-Existing boot loaders:
-	OPTIONAL
-New boot loaders:
-	MANDATORY except for DT-only platforms
-
-The boot loader should detect the machine type its running on by some
-method.  Whether this is a hard coded value or some algorithm that
-looks at the connected hardware is beyond the scope of this document.
-The boot loader must ultimately be able to provide a MACH_TYPE_xxx
-value to the kernel. (see linux/arch/arm/tools/mach-types).  This
-should be passed to the kernel in register r1.
-
-For DT-only platforms, the machine type will be determined by device
-tree.  set the machine type to all ones (~0).  This is not strictly
-necessary, but assures that it will not match any existing types.
-
-4. Setup boot data
-------------------
-
-Existing boot loaders:
-	OPTIONAL, HIGHLY RECOMMENDED
-New boot loaders:
-	MANDATORY
-
-The boot loader must provide either a tagged list or a dtb image for
-passing configuration data to the kernel.  The physical address of the
-boot data is passed to the kernel in register r2.
-
-4a. Setup the kernel tagged list
---------------------------------
-
-The boot loader must create and initialise the kernel tagged list.
-A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE.
-The ATAG_CORE tag may or may not be empty.  An empty ATAG_CORE tag
-has the size field set to '2' (0x00000002).  The ATAG_NONE must set
-the size field to zero.
-
-Any number of tags can be placed in the list.  It is undefined
-whether a repeated tag appends to the information carried by the
-previous tag, or whether it replaces the information in its
-entirety; some tags behave as the former, others the latter.
-
-The boot loader must pass at a minimum the size and location of
-the system memory, and root filesystem location.  Therefore, the
-minimum tagged list should look::
-
-		+-----------+
-  base ->	| ATAG_CORE |  |
-		+-----------+  |
-		| ATAG_MEM  |  | increasing address
-		+-----------+  |
-		| ATAG_NONE |  |
-		+-----------+  v
-
-The tagged list should be stored in system RAM.
-
-The tagged list must be placed in a region of memory where neither
-the kernel decompressor nor initrd 'bootp' program will overwrite
-it.  The recommended placement is in the first 16KiB of RAM.
-
-4b. Setup the device tree
--------------------------
-
-The boot loader must load a device tree image (dtb) into system ram
-at a 64bit aligned address and initialize it with the boot data.  The
-dtb format is documented at https://www.devicetree.org/specifications/.
-The kernel will look for the dtb magic value of 0xd00dfeed at the dtb
-physical address to determine if a dtb has been passed instead of a
-tagged list.
-
-The boot loader must pass at a minimum the size and location of the
-system memory, and the root filesystem location.  The dtb must be
-placed in a region of memory where the kernel decompressor will not
-overwrite it, while remaining within the region which will be covered
-by the kernel's low-memory mapping.
-
-A safe location is just above the 128MiB boundary from start of RAM.
-
-5. Load initramfs.
-------------------
-
-Existing boot loaders:
-	OPTIONAL
-New boot loaders:
-	OPTIONAL
-
-If an initramfs is in use then, as with the dtb, it must be placed in
-a region of memory where the kernel decompressor will not overwrite it
-while also with the region which will be covered by the kernel's
-low-memory mapping.
-
-A safe location is just above the device tree blob which itself will
-be loaded just above the 128MiB boundary from the start of RAM as
-recommended above.
-
-6. Calling the kernel image
----------------------------
-
-Existing boot loaders:
-	MANDATORY
-New boot loaders:
-	MANDATORY
-
-There are two options for calling the kernel zImage.  If the zImage
-is stored in flash, and is linked correctly to be run from flash,
-then it is legal for the boot loader to call the zImage in flash
-directly.
-
-The zImage may also be placed in system RAM and called there.  The
-kernel should be placed in the first 128MiB of RAM.  It is recommended
-that it is loaded above 32MiB in order to avoid the need to relocate
-prior to decompression, which will make the boot process slightly
-faster.
-
-When booting a raw (non-zImage) kernel the constraints are tighter.
-In this case the kernel must be loaded at an offset into system equal
-to TEXT_OFFSET - PAGE_OFFSET.
-
-In any case, the following conditions must be met:
-
-- Quiesce all DMA capable devices so that memory does not get
-  corrupted by bogus network packets or disk data. This will save
-  you many hours of debug.
-
-- CPU register settings
-
-  - r0 = 0,
-  - r1 = machine type number discovered in (3) above.
-  - r2 = physical address of tagged list in system RAM, or
-    physical address of device tree block (dtb) in system RAM
-
-- CPU mode
-
-  All forms of interrupts must be disabled (IRQs and FIQs)
-
-  For CPUs which do not include the ARM virtualization extensions, the
-  CPU must be in SVC mode.  (A special exception exists for Angel)
-
-  CPUs which include support for the virtualization extensions can be
-  entered in HYP mode in order to enable the kernel to make full use of
-  these extensions.  This is the recommended boot method for such CPUs,
-  unless the virtualisations are already in use by a pre-installed
-  hypervisor.
-
-  If the kernel is not entered in HYP mode for any reason, it must be
-  entered in SVC mode.
-
-- Caches, MMUs
-
-  The MMU must be off.
-
-  Instruction cache may be on or off.
-
-  Data cache must be off.
-
-  If the kernel is entered in HYP mode, the above requirements apply to
-  the HYP mode configuration in addition to the ordinary PL1 (privileged
-  kernel modes) configuration.  In addition, all traps into the
-  hypervisor must be disabled, and PL1 access must be granted for all
-  peripherals and CPU resources for which this is architecturally
-  possible.  Except for entering in HYP mode, the system configuration
-  should be such that a kernel which does not include support for the
-  virtualization extensions can boot correctly without extra help.
-
-- The boot loader is expected to call the kernel image by jumping
-  directly to the first instruction of the kernel image.
-
-  On CPUs supporting the ARM instruction set, the entry must be
-  made in ARM state, even for a Thumb-2 kernel.
-
-  On CPUs supporting only the Thumb instruction set such as
-  Cortex-M class CPUs, the entry must be made in Thumb state.
diff --git a/Documentation/arm/cluster-pm-race-avoidance.rst b/Documentation/arm/cluster-pm-race-avoidance.rst
deleted file mode 100644
index aa58603d3f28b..0000000000000
--- a/Documentation/arm/cluster-pm-race-avoidance.rst
+++ /dev/null
@@ -1,533 +0,0 @@
-=========================================================
-Cluster-wide Power-up/power-down race avoidance algorithm
-=========================================================
-
-This file documents the algorithm which is used to coordinate CPU and
-cluster setup and teardown operations and to manage hardware coherency
-controls safely.
-
-The section "Rationale" explains what the algorithm is for and why it is
-needed.  "Basic model" explains general concepts using a simplified view
-of the system.  The other sections explain the actual details of the
-algorithm in use.
-
-
-Rationale
----------
-
-In a system containing multiple CPUs, it is desirable to have the
-ability to turn off individual CPUs when the system is idle, reducing
-power consumption and thermal dissipation.
-
-In a system containing multiple clusters of CPUs, it is also desirable
-to have the ability to turn off entire clusters.
-
-Turning entire clusters off and on is a risky business, because it
-involves performing potentially destructive operations affecting a group
-of independently running CPUs, while the OS continues to run.  This
-means that we need some coordination in order to ensure that critical
-cluster-level operations are only performed when it is truly safe to do
-so.
-
-Simple locking may not be sufficient to solve this problem, because
-mechanisms like Linux spinlocks may rely on coherency mechanisms which
-are not immediately enabled when a cluster powers up.  Since enabling or
-disabling those mechanisms may itself be a non-atomic operation (such as
-writing some hardware registers and invalidating large caches), other
-methods of coordination are required in order to guarantee safe
-power-down and power-up at the cluster level.
-
-The mechanism presented in this document describes a coherent memory
-based protocol for performing the needed coordination.  It aims to be as
-lightweight as possible, while providing the required safety properties.
-
-
-Basic model
------------
-
-Each cluster and CPU is assigned a state, as follows:
-
-	- DOWN
-	- COMING_UP
-	- UP
-	- GOING_DOWN
-
-::
-
-	    +---------> UP ----------+
-	    |                        v
-
-	COMING_UP                GOING_DOWN
-
-	    ^                        |
-	    +--------- DOWN <--------+
-
-
-DOWN:
-	The CPU or cluster is not coherent, and is either powered off or
-	suspended, or is ready to be powered off or suspended.
-
-COMING_UP:
-	The CPU or cluster has committed to moving to the UP state.
-	It may be part way through the process of initialisation and
-	enabling coherency.
-
-UP:
-	The CPU or cluster is active and coherent at the hardware
-	level.  A CPU in this state is not necessarily being used
-	actively by the kernel.
-
-GOING_DOWN:
-	The CPU or cluster has committed to moving to the DOWN
-	state.  It may be part way through the process of teardown and
-	coherency exit.
-
-
-Each CPU has one of these states assigned to it at any point in time.
-The CPU states are described in the "CPU state" section, below.
-
-Each cluster is also assigned a state, but it is necessary to split the
-state value into two parts (the "cluster" state and "inbound" state) and
-to introduce additional states in order to avoid races between different
-CPUs in the cluster simultaneously modifying the state.  The cluster-
-level states are described in the "Cluster state" section.
-
-To help distinguish the CPU states from cluster states in this
-discussion, the state names are given a `CPU_` prefix for the CPU states,
-and a `CLUSTER_` or `INBOUND_` prefix for the cluster states.
-
-
-CPU state
----------
-
-In this algorithm, each individual core in a multi-core processor is
-referred to as a "CPU".  CPUs are assumed to be single-threaded:
-therefore, a CPU can only be doing one thing at a single point in time.
-
-This means that CPUs fit the basic model closely.
-
-The algorithm defines the following states for each CPU in the system:
-
-	- CPU_DOWN
-	- CPU_COMING_UP
-	- CPU_UP
-	- CPU_GOING_DOWN
-
-::
-
-	 cluster setup and
-	CPU setup complete          policy decision
-	      +-----------> CPU_UP ------------+
-	      |                                v
-
-	CPU_COMING_UP                   CPU_GOING_DOWN
-
-	      ^                                |
-	      +----------- CPU_DOWN <----------+
-	 policy decision           CPU teardown complete
-	or hardware event
-
-
-The definitions of the four states correspond closely to the states of
-the basic model.
-
-Transitions between states occur as follows.
-
-A trigger event (spontaneous) means that the CPU can transition to the
-next state as a result of making local progress only, with no
-requirement for any external event to happen.
-
-
-CPU_DOWN:
-	A CPU reaches the CPU_DOWN state when it is ready for
-	power-down.  On reaching this state, the CPU will typically
-	power itself down or suspend itself, via a WFI instruction or a
-	firmware call.
-
-	Next state:
-		CPU_COMING_UP
-	Conditions:
-		none
-
-	Trigger events:
-		a) an explicit hardware power-up operation, resulting
-		   from a policy decision on another CPU;
-
-		b) a hardware event, such as an interrupt.
-
-
-CPU_COMING_UP:
-	A CPU cannot start participating in hardware coherency until the
-	cluster is set up and coherent.  If the cluster is not ready,
-	then the CPU will wait in the CPU_COMING_UP state until the
-	cluster has been set up.
-
-	Next state:
-		CPU_UP
-	Conditions:
-		The CPU's parent cluster must be in CLUSTER_UP.
-	Trigger events:
-		Transition of the parent cluster to CLUSTER_UP.
-
-	Refer to the "Cluster state" section for a description of the
-	CLUSTER_UP state.
-
-
-CPU_UP:
-	When a CPU reaches the CPU_UP state, it is safe for the CPU to
-	start participating in local coherency.
-
-	This is done by jumping to the kernel's CPU resume code.
-
-	Note that the definition of this state is slightly different
-	from the basic model definition: CPU_UP does not mean that the
-	CPU is coherent yet, but it does mean that it is safe to resume
-	the kernel.  The kernel handles the rest of the resume
-	procedure, so the remaining steps are not visible as part of the
-	race avoidance algorithm.
-
-	The CPU remains in this state until an explicit policy decision
-	is made to shut down or suspend the CPU.
-
-	Next state:
-		CPU_GOING_DOWN
-	Conditions:
-		none
-	Trigger events:
-		explicit policy decision
-
-
-CPU_GOING_DOWN:
-	While in this state, the CPU exits coherency, including any
-	operations required to achieve this (such as cleaning data
-	caches).
-
-	Next state:
-		CPU_DOWN
-	Conditions:
-		local CPU teardown complete
-	Trigger events:
-		(spontaneous)
-
-
-Cluster state
--------------
-
-A cluster is a group of connected CPUs with some common resources.
-Because a cluster contains multiple CPUs, it can be doing multiple
-things at the same time.  This has some implications.  In particular, a
-CPU can start up while another CPU is tearing the cluster down.
-
-In this discussion, the "outbound side" is the view of the cluster state
-as seen by a CPU tearing the cluster down.  The "inbound side" is the
-view of the cluster state as seen by a CPU setting the CPU up.
-
-In order to enable safe coordination in such situations, it is important
-that a CPU which is setting up the cluster can advertise its state
-independently of the CPU which is tearing down the cluster.  For this
-reason, the cluster state is split into two parts:
-
-	"cluster" state: The global state of the cluster; or the state
-	on the outbound side:
-
-		- CLUSTER_DOWN
-		- CLUSTER_UP
-		- CLUSTER_GOING_DOWN
-
-	"inbound" state: The state of the cluster on the inbound side.
-
-		- INBOUND_NOT_COMING_UP
-		- INBOUND_COMING_UP
-
-
-	The different pairings of these states results in six possible
-	states for the cluster as a whole::
-
-	                            CLUSTER_UP
-	          +==========> INBOUND_NOT_COMING_UP -------------+
-	          #                                               |
-	                                                          |
-	     CLUSTER_UP     <----+                                |
-	  INBOUND_COMING_UP      |                                v
-
-	          ^             CLUSTER_GOING_DOWN       CLUSTER_GOING_DOWN
-	          #              INBOUND_COMING_UP <=== INBOUND_NOT_COMING_UP
-
-	    CLUSTER_DOWN         |                                |
-	  INBOUND_COMING_UP <----+                                |
-	                                                          |
-	          ^                                               |
-	          +===========     CLUSTER_DOWN      <------------+
-	                       INBOUND_NOT_COMING_UP
-
-	Transitions -----> can only be made by the outbound CPU, and
-	only involve changes to the "cluster" state.
-
-	Transitions ===##> can only be made by the inbound CPU, and only
-	involve changes to the "inbound" state, except where there is no
-	further transition possible on the outbound side (i.e., the
-	outbound CPU has put the cluster into the CLUSTER_DOWN state).
-
-	The race avoidance algorithm does not provide a way to determine
-	which exact CPUs within the cluster play these roles.  This must
-	be decided in advance by some other means.  Refer to the section
-	"Last man and first man selection" for more explanation.
-
-
-	CLUSTER_DOWN/INBOUND_NOT_COMING_UP is the only state where the
-	cluster can actually be powered down.
-
-	The parallelism of the inbound and outbound CPUs is observed by
-	the existence of two different paths from CLUSTER_GOING_DOWN/
-	INBOUND_NOT_COMING_UP (corresponding to GOING_DOWN in the basic
-	model) to CLUSTER_DOWN/INBOUND_COMING_UP (corresponding to
-	COMING_UP in the basic model).  The second path avoids cluster
-	teardown completely.
-
-	CLUSTER_UP/INBOUND_COMING_UP is equivalent to UP in the basic
-	model.  The final transition to CLUSTER_UP/INBOUND_NOT_COMING_UP
-	is trivial and merely resets the state machine ready for the
-	next cycle.
-
-	Details of the allowable transitions follow.
-
-	The next state in each case is notated
-
-		<cluster state>/<inbound state> (<transitioner>)
-
-	where the <transitioner> is the side on which the transition
-	can occur; either the inbound or the outbound side.
-
-
-CLUSTER_DOWN/INBOUND_NOT_COMING_UP:
-	Next state:
-		CLUSTER_DOWN/INBOUND_COMING_UP (inbound)
-	Conditions:
-		none
-
-	Trigger events:
-		a) an explicit hardware power-up operation, resulting
-		   from a policy decision on another CPU;
-
-		b) a hardware event, such as an interrupt.
-
-
-CLUSTER_DOWN/INBOUND_COMING_UP:
-
-	In this state, an inbound CPU sets up the cluster, including
-	enabling of hardware coherency at the cluster level and any
-	other operations (such as cache invalidation) which are required
-	in order to achieve this.
-
-	The purpose of this state is to do sufficient cluster-level
-	setup to enable other CPUs in the cluster to enter coherency
-	safely.
-
-	Next state:
-		CLUSTER_UP/INBOUND_COMING_UP (inbound)
-	Conditions:
-		cluster-level setup and hardware coherency complete
-	Trigger events:
-		(spontaneous)
-
-
-CLUSTER_UP/INBOUND_COMING_UP:
-
-	Cluster-level setup is complete and hardware coherency is
-	enabled for the cluster.  Other CPUs in the cluster can safely
-	enter coherency.
-
-	This is a transient state, leading immediately to
-	CLUSTER_UP/INBOUND_NOT_COMING_UP.  All other CPUs on the cluster
-	should consider treat these two states as equivalent.
-
-	Next state:
-		CLUSTER_UP/INBOUND_NOT_COMING_UP (inbound)
-	Conditions:
-		none
-	Trigger events:
-		(spontaneous)
-
-
-CLUSTER_UP/INBOUND_NOT_COMING_UP:
-
-	Cluster-level setup is complete and hardware coherency is
-	enabled for the cluster.  Other CPUs in the cluster can safely
-	enter coherency.
-
-	The cluster will remain in this state until a policy decision is
-	made to power the cluster down.
-
-	Next state:
-		CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP (outbound)
-	Conditions:
-		none
-	Trigger events:
-		policy decision to power down the cluster
-
-
-CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP:
-
-	An outbound CPU is tearing the cluster down.  The selected CPU
-	must wait in this state until all CPUs in the cluster are in the
-	CPU_DOWN state.
-
-	When all CPUs are in the CPU_DOWN state, the cluster can be torn
-	down, for example by cleaning data caches and exiting
-	cluster-level coherency.
-
-	To avoid wasteful unnecessary teardown operations, the outbound
-	should check the inbound cluster state for asynchronous
-	transitions to INBOUND_COMING_UP.  Alternatively, individual
-	CPUs can be checked for entry into CPU_COMING_UP or CPU_UP.
-
-
-	Next states:
-
-	CLUSTER_DOWN/INBOUND_NOT_COMING_UP (outbound)
-		Conditions:
-			cluster torn down and ready to power off
-		Trigger events:
-			(spontaneous)
-
-	CLUSTER_GOING_DOWN/INBOUND_COMING_UP (inbound)
-		Conditions:
-			none
-
-		Trigger events:
-			a) an explicit hardware power-up operation,
-			   resulting from a policy decision on another
-			   CPU;
-
-			b) a hardware event, such as an interrupt.
-
-
-CLUSTER_GOING_DOWN/INBOUND_COMING_UP:
-
-	The cluster is (or was) being torn down, but another CPU has
-	come online in the meantime and is trying to set up the cluster
-	again.
-
-	If the outbound CPU observes this state, it has two choices:
-
-		a) back out of teardown, restoring the cluster to the
-		   CLUSTER_UP state;
-
-		b) finish tearing the cluster down and put the cluster
-		   in the CLUSTER_DOWN state; the inbound CPU will
-		   set up the cluster again from there.
-
-	Choice (a) permits the removal of some latency by avoiding
-	unnecessary teardown and setup operations in situations where
-	the cluster is not really going to be powered down.
-
-
-	Next states:
-
-	CLUSTER_UP/INBOUND_COMING_UP (outbound)
-		Conditions:
-				cluster-level setup and hardware
-				coherency complete
-
-		Trigger events:
-				(spontaneous)
-
-	CLUSTER_DOWN/INBOUND_COMING_UP (outbound)
-		Conditions:
-			cluster torn down and ready to power off
-
-		Trigger events:
-			(spontaneous)
-
-
-Last man and First man selection
---------------------------------
-
-The CPU which performs cluster tear-down operations on the outbound side
-is commonly referred to as the "last man".
-
-The CPU which performs cluster setup on the inbound side is commonly
-referred to as the "first man".
-
-The race avoidance algorithm documented above does not provide a
-mechanism to choose which CPUs should play these roles.
-
-
-Last man:
-
-When shutting down the cluster, all the CPUs involved are initially
-executing Linux and hence coherent.  Therefore, ordinary spinlocks can
-be used to select a last man safely, before the CPUs become
-non-coherent.
-
-
-First man:
-
-Because CPUs may power up asynchronously in response to external wake-up
-events, a dynamic mechanism is needed to make sure that only one CPU
-attempts to play the first man role and do the cluster-level
-initialisation: any other CPUs must wait for this to complete before
-proceeding.
-
-Cluster-level initialisation may involve actions such as configuring
-coherency controls in the bus fabric.
-
-The current implementation in mcpm_head.S uses a separate mutual exclusion
-mechanism to do this arbitration.  This mechanism is documented in
-detail in vlocks.txt.
-
-
-Features and Limitations
-------------------------
-
-Implementation:
-
-	The current ARM-based implementation is split between
-	arch/arm/common/mcpm_head.S (low-level inbound CPU operations) and
-	arch/arm/common/mcpm_entry.c (everything else):
-
-	__mcpm_cpu_going_down() signals the transition of a CPU to the
-	CPU_GOING_DOWN state.
-
-	__mcpm_cpu_down() signals the transition of a CPU to the CPU_DOWN
-	state.
-
-	A CPU transitions to CPU_COMING_UP and then to CPU_UP via the
-	low-level power-up code in mcpm_head.S.  This could
-	involve CPU-specific setup code, but in the current
-	implementation it does not.
-
-	__mcpm_outbound_enter_critical() and __mcpm_outbound_leave_critical()
-	handle transitions from CLUSTER_UP to CLUSTER_GOING_DOWN
-	and from there to CLUSTER_DOWN or back to CLUSTER_UP (in
-	the case of an aborted cluster power-down).
-
-	These functions are more complex than the __mcpm_cpu_*()
-	functions due to the extra inter-CPU coordination which
-	is needed for safe transitions at the cluster level.
-
-	A cluster transitions from CLUSTER_DOWN back to CLUSTER_UP via
-	the low-level power-up code in mcpm_head.S.  This
-	typically involves platform-specific setup code,
-	provided by the platform-specific power_up_setup
-	function registered via mcpm_sync_init.
-
-Deep topologies:
-
-	As currently described and implemented, the algorithm does not
-	support CPU topologies involving more than two levels (i.e.,
-	clusters of clusters are not supported).  The algorithm could be
-	extended by replicating the cluster-level states for the
-	additional topological levels, and modifying the transition
-	rules for the intermediate (non-outermost) cluster levels.
-
-
-Colophon
---------
-
-Originally created and documented by Dave Martin for Linaro Limited, in
-collaboration with Nicolas Pitre and Achin Gupta.
-
-Copyright (C) 2012-2013  Linaro Limited
-Distributed under the terms of Version 2 of the GNU General Public
-License, as defined in linux/COPYING.
diff --git a/Documentation/arm/features.rst b/Documentation/arm/features.rst
deleted file mode 100644
index 7414ec03dd157..0000000000000
--- a/Documentation/arm/features.rst
+++ /dev/null
@@ -1,3 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. kernel-feat:: $srctree/Documentation/features arm
diff --git a/Documentation/arm/firmware.rst b/Documentation/arm/firmware.rst
deleted file mode 100644
index efd844baec1da..0000000000000
--- a/Documentation/arm/firmware.rst
+++ /dev/null
@@ -1,72 +0,0 @@
-==========================================================================
-Interface for registering and calling firmware-specific operations for ARM
-==========================================================================
-
-Written by Tomasz Figa <t.figa@samsung.com>
-
-Some boards are running with secure firmware running in TrustZone secure
-world, which changes the way some things have to be initialized. This makes
-a need to provide an interface for such platforms to specify available firmware
-operations and call them when needed.
-
-Firmware operations can be specified by filling in a struct firmware_ops
-with appropriate callbacks and then registering it with register_firmware_ops()
-function::
-
-	void register_firmware_ops(const struct firmware_ops *ops)
-
-The ops pointer must be non-NULL. More information about struct firmware_ops
-and its members can be found in arch/arm/include/asm/firmware.h header.
-
-There is a default, empty set of operations provided, so there is no need to
-set anything if platform does not require firmware operations.
-
-To call a firmware operation, a helper macro is provided::
-
-	#define call_firmware_op(op, ...)				\
-		((firmware_ops->op) ? firmware_ops->op(__VA_ARGS__) : (-ENOSYS))
-
-the macro checks if the operation is provided and calls it or otherwise returns
--ENOSYS to signal that given operation is not available (for example, to allow
-fallback to legacy operation).
-
-Example of registering firmware operations::
-
-	/* board file */
-
-	static int platformX_do_idle(void)
-	{
-		/* tell platformX firmware to enter idle */
-		return 0;
-	}
-
-	static int platformX_cpu_boot(int i)
-	{
-		/* tell platformX firmware to boot CPU i */
-		return 0;
-	}
-
-	static const struct firmware_ops platformX_firmware_ops = {
-		.do_idle        = exynos_do_idle,
-		.cpu_boot       = exynos_cpu_boot,
-		/* other operations not available on platformX */
-	};
-
-	/* init_early callback of machine descriptor */
-	static void __init board_init_early(void)
-	{
-		register_firmware_ops(&platformX_firmware_ops);
-	}
-
-Example of using a firmware operation::
-
-	/* some platform code, e.g. SMP initialization */
-
-	__raw_writel(__pa_symbol(exynos4_secondary_startup),
-		CPU1_BOOT_REG);
-
-	/* Call Exynos specific smc call */
-	if (call_firmware_op(cpu_boot, cpu) == -ENOSYS)
-		cpu_boot_legacy(...); /* Try legacy way */
-
-	gic_raise_softirq(cpumask_of(cpu), 1);
diff --git a/Documentation/arm/google/chromebook-boot-flow.rst b/Documentation/arm/google/chromebook-boot-flow.rst
deleted file mode 100644
index 36da77684bba7..0000000000000
--- a/Documentation/arm/google/chromebook-boot-flow.rst
+++ /dev/null
@@ -1,69 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-======================================
-Chromebook Boot Flow
-======================================
-
-Most recent Chromebooks that use device tree are using the opensource
-depthcharge_ bootloader. Depthcharge_ expects the OS to be packaged as a `FIT
-Image`_ which contains an OS image as well as a collection of device trees. It
-is up to depthcharge_ to pick the right device tree from the `FIT Image`_ and
-provide it to the OS.
-
-The scheme that depthcharge_ uses to pick the device tree takes into account
-three variables:
-
-- Board name, specified at depthcharge_ compile time. This is $(BOARD) below.
-- Board revision number, determined at runtime (perhaps by reading GPIO
-  strappings, perhaps via some other method). This is $(REV) below.
-- SKU number, read from GPIO strappings at boot time. This is $(SKU) below.
-
-For recent Chromebooks, depthcharge_ creates a match list that looks like this:
-
-- google,$(BOARD)-rev$(REV)-sku$(SKU)
-- google,$(BOARD)-rev$(REV)
-- google,$(BOARD)-sku$(SKU)
-- google,$(BOARD)
-
-Note that some older Chromebooks use a slightly different list that may
-not include SKU matching or may prioritize SKU/rev differently.
-
-Note that for some boards there may be extra board-specific logic to inject
-extra compatibles into the list, but this is uncommon.
-
-Depthcharge_ will look through all device trees in the `FIT Image`_ trying to
-find one that matches the most specific compatible. It will then look
-through all device trees in the `FIT Image`_ trying to find the one that
-matches the *second most* specific compatible, etc.
-
-When searching for a device tree, depthcharge_ doesn't care where the
-compatible string falls within a device tree's root compatible string array.
-As an example, if we're on board "lazor", rev 4, SKU 0 and we have two device
-trees:
-
-- "google,lazor-rev5-sku0", "google,lazor-rev4-sku0", "qcom,sc7180"
-- "google,lazor", "qcom,sc7180"
-
-Then depthcharge_ will pick the first device tree even though
-"google,lazor-rev4-sku0" was the second compatible listed in that device tree.
-This is because it is a more specific compatible than "google,lazor".
-
-It should be noted that depthcharge_ does not have any smarts to try to
-match board or SKU revisions that are "close by". That is to say that
-if depthcharge_ knows it's on "rev4" of a board but there is no "rev4"
-device tree then depthcharge_ *won't* look for a "rev3" device tree.
-
-In general when any significant changes are made to a board the board
-revision number is increased even if none of those changes need to
-be reflected in the device tree. Thus it's fairly common to see device
-trees with multiple revisions.
-
-It should be noted that, taking into account the above system that
-depthcharge_ has, the most flexibility is achieved if the device tree
-supporting the newest revision(s) of a board omits the "-rev{REV}"
-compatible strings. When this is done then if you get a new board
-revision and try to run old software on it then we'll at pick the
-newest device tree we know about.
-
-.. _depthcharge: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/depthcharge/
-.. _`FIT Image`: https://doc.coreboot.org/lib/payloads/fit.html
diff --git a/Documentation/arm/index.rst b/Documentation/arm/index.rst
deleted file mode 100644
index fd43502ae9246..0000000000000
--- a/Documentation/arm/index.rst
+++ /dev/null
@@ -1,85 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-================
-ARM Architecture
-================
-
-.. toctree::
-   :maxdepth: 1
-
-   arm
-   booting
-   cluster-pm-race-avoidance
-   firmware
-   interrupts
-   kernel_mode_neon
-   kernel_user_helpers
-   memory
-   mem_alignment
-   tcm
-   setup
-   swp_emulation
-   uefi
-   vlocks
-   porting
-
-   features
-
-SoC-specific documents
-======================
-
-.. toctree::
-   :maxdepth: 1
-
-   google/chromebook-boot-flow
-
-   ixp4xx
-
-   marvell
-   microchip
-
-   netwinder
-   nwfpe/index
-
-   keystone/overview
-   keystone/knav-qmss
-
-   omap/index
-
-   pxa/mfp
-
-
-   sa1100/index
-
-   stm32/stm32f746-overview
-   stm32/overview
-   stm32/stm32h743-overview
-   stm32/stm32h750-overview
-   stm32/stm32f769-overview
-   stm32/stm32f429-overview
-   stm32/stm32mp13-overview
-   stm32/stm32mp151-overview
-   stm32/stm32mp157-overview
-   stm32/stm32-dma-mdma-chaining
-
-   sunxi
-
-   samsung/index
-
-   sunxi/clocks
-
-   spear/overview
-
-   sti/stih407-overview
-   sti/stih418-overview
-   sti/overview
-
-   vfp/release-notes
-
-
-.. only::  subproject and html
-
-   Indices
-   =======
-
-   * :ref:`genindex`
diff --git a/Documentation/arm/interrupts.rst b/Documentation/arm/interrupts.rst
deleted file mode 100644
index 2ae70e0e9732c..0000000000000
--- a/Documentation/arm/interrupts.rst
+++ /dev/null
@@ -1,169 +0,0 @@
-==========
-Interrupts
-==========
-
-2.5.2-rmk5:
-  This is the first kernel that contains a major shake up of some of the
-  major architecture-specific subsystems.
-
-Firstly, it contains some pretty major changes to the way we handle the
-MMU TLB.  Each MMU TLB variant is now handled completely separately -
-we have TLB v3, TLB v4 (without write buffer), TLB v4 (with write buffer),
-and finally TLB v4 (with write buffer, with I TLB invalidate entry).
-There is more assembly code inside each of these functions, mainly to
-allow more flexible TLB handling for the future.
-
-Secondly, the IRQ subsystem.
-
-The 2.5 kernels will be having major changes to the way IRQs are handled.
-Unfortunately, this means that machine types that touch the irq_desc[]
-array (basically all machine types) will break, and this means every
-machine type that we currently have.
-
-Lets take an example.  On the Assabet with Neponset, we have::
-
-                  GPIO25                 IRR:2
-        SA1100 ------------> Neponset -----------> SA1111
-                                         IIR:1
-                                      -----------> USAR
-                                         IIR:0
-                                      -----------> SMC9196
-
-The way stuff currently works, all SA1111 interrupts are mutually
-exclusive of each other - if you're processing one interrupt from the
-SA1111 and another comes in, you have to wait for that interrupt to
-finish processing before you can service the new interrupt.  Eg, an
-IDE PIO-based interrupt on the SA1111 excludes all other SA1111 and
-SMC9196 interrupts until it has finished transferring its multi-sector
-data, which can be a long time.  Note also that since we loop in the
-SA1111 IRQ handler, SA1111 IRQs can hold off SMC9196 IRQs indefinitely.
-
-
-The new approach brings several new ideas...
-
-We introduce the concept of a "parent" and a "child".  For example,
-to the Neponset handler, the "parent" is GPIO25, and the "children"d
-are SA1111, SMC9196 and USAR.
-
-We also bring the idea of an IRQ "chip" (mainly to reduce the size of
-the irqdesc array).  This doesn't have to be a real "IC"; indeed the
-SA11x0 IRQs are handled by two separate "chip" structures, one for
-GPIO0-10, and another for all the rest.  It is just a container for
-the various operations (maybe this'll change to a better name).
-This structure has the following operations::
-
-  struct irqchip {
-          /*
-           * Acknowledge the IRQ.
-           * If this is a level-based IRQ, then it is expected to mask the IRQ
-           * as well.
-           */
-          void (*ack)(unsigned int irq);
-          /*
-           * Mask the IRQ in hardware.
-           */
-          void (*mask)(unsigned int irq);
-          /*
-           * Unmask the IRQ in hardware.
-           */
-          void (*unmask)(unsigned int irq);
-          /*
-           * Re-run the IRQ
-           */
-          void (*rerun)(unsigned int irq);
-          /*
-           * Set the type of the IRQ.
-           */
-          int (*type)(unsigned int irq, unsigned int, type);
-  };
-
-ack
-       - required.  May be the same function as mask for IRQs
-         handled by do_level_IRQ.
-mask
-       - required.
-unmask
-       - required.
-rerun
-       - optional.  Not required if you're using do_level_IRQ for all
-         IRQs that use this 'irqchip'.  Generally expected to re-trigger
-         the hardware IRQ if possible.  If not, may call the handler
-	 directly.
-type
-       - optional.  If you don't support changing the type of an IRQ,
-         it should be null so people can detect if they are unable to
-         set the IRQ type.
-
-For each IRQ, we keep the following information:
-
-        - "disable" depth (number of disable_irq()s without enable_irq()s)
-        - flags indicating what we can do with this IRQ (valid, probe,
-          noautounmask) as before
-        - status of the IRQ (probing, enable, etc)
-        - chip
-        - per-IRQ handler
-        - irqaction structure list
-
-The handler can be one of the 3 standard handlers - "level", "edge" and
-"simple", or your own specific handler if you need to do something special.
-
-The "level" handler is what we currently have - its pretty simple.
-"edge" knows about the brokenness of such IRQ implementations - that you
-need to leave the hardware IRQ enabled while processing it, and queueing
-further IRQ events should the IRQ happen again while processing.  The
-"simple" handler is very basic, and does not perform any hardware
-manipulation, nor state tracking.  This is useful for things like the
-SMC9196 and USAR above.
-
-So, what's changed?
-===================
-
-1. Machine implementations must not write to the irqdesc array.
-
-2. New functions to manipulate the irqdesc array.  The first 4 are expected
-   to be useful only to machine specific code.  The last is recommended to
-   only be used by machine specific code, but may be used in drivers if
-   absolutely necessary.
-
-        set_irq_chip(irq,chip)
-                Set the mask/unmask methods for handling this IRQ
-
-        set_irq_handler(irq,handler)
-                Set the handler for this IRQ (level, edge, simple)
-
-        set_irq_chained_handler(irq,handler)
-                Set a "chained" handler for this IRQ - automatically
-                enables this IRQ (eg, Neponset and SA1111 handlers).
-
-        set_irq_flags(irq,flags)
-                Set the valid/probe/noautoenable flags.
-
-        set_irq_type(irq,type)
-                Set active the IRQ edge(s)/level.  This replaces the
-                SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge()
-                function.  Type should be one of IRQ_TYPE_xxx defined in
-		<linux/irq.h>
-
-3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type.
-
-4. Direct access to SA1111 INTPOL is deprecated.  Use set_irq_type instead.
-
-5. A handler is expected to perform any necessary acknowledgement of the
-   parent IRQ via the correct chip specific function.  For instance, if
-   the SA1111 is directly connected to a SA1110 GPIO, then you should
-   acknowledge the SA1110 IRQ each time you re-read the SA1111 IRQ status.
-
-6. For any child which doesn't have its own IRQ enable/disable controls
-   (eg, SMC9196), the handler must mask or acknowledge the parent IRQ
-   while the child handler is called, and the child handler should be the
-   "simple" handler (not "edge" nor "level").  After the handler completes,
-   the parent IRQ should be unmasked, and the status of all children must
-   be re-checked for pending events.  (see the Neponset IRQ handler for
-   details).
-
-7. fixup_irq() is gone, as is `arch/arm/mach-*/include/mach/irq.h`
-
-Please note that this will not solve all problems - some of them are
-hardware based.  Mixing level-based and edge-based IRQs on the same
-parent signal (eg neponset) is one such area where a software based
-solution can't provide the full answer to low IRQ latency.
diff --git a/Documentation/arm/ixp4xx.rst b/Documentation/arm/ixp4xx.rst
deleted file mode 100644
index a57235616294a..0000000000000
--- a/Documentation/arm/ixp4xx.rst
+++ /dev/null
@@ -1,173 +0,0 @@
-===========================================================
-Release Notes for Linux on Intel's IXP4xx Network Processor
-===========================================================
-
-Maintained by Deepak Saxena <dsaxena@plexity.net>
--------------------------------------------------------------------------
-
-1. Overview
-
-Intel's IXP4xx network processor is a highly integrated SOC that
-is targeted for network applications, though it has become popular
-in industrial control and other areas due to low cost and power
-consumption. The IXP4xx family currently consists of several processors
-that support different network offload functions such as encryption,
-routing, firewalling, etc. The IXP46x family is an updated version which
-supports faster speeds, new memory and flash configurations, and more
-integration such as an on-chip I2C controller.
-
-For more information on the various versions of the CPU, see:
-
-   http://developer.intel.com/design/network/products/npfamily/ixp4xx.htm
-
-Intel also made the IXCP1100 CPU for sometime which is an IXP4xx
-stripped of much of the network intelligence.
-
-2. Linux Support
-
-Linux currently supports the following features on the IXP4xx chips:
-
-- Dual serial ports
-- PCI interface
-- Flash access (MTD/JFFS)
-- I2C through GPIO on IXP42x
-- GPIO for input/output/interrupts
-  See arch/arm/mach-ixp4xx/include/mach/platform.h for access functions.
-- Timers (watchdog, OS)
-
-The following components of the chips are not supported by Linux and
-require the use of Intel's proprietary CSR software:
-
-- USB device interface
-- Network interfaces (HSS, Utopia, NPEs, etc)
-- Network offload functionality
-
-If you need to use any of the above, you need to download Intel's
-software from:
-
-   http://developer.intel.com/design/network/products/npfamily/ixp425.htm
-
-DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPRIETARY
-SOFTWARE.
-
-There are several websites that provide directions/pointers on using
-Intel's software:
-
-   - http://sourceforge.net/projects/ixp4xx-osdg/
-     Open Source Developer's Guide for using uClinux and the Intel libraries
-
-   - http://gatewaymaker.sourceforge.net/
-     Simple one page summary of building a gateway using an IXP425 and Linux
-
-   - http://ixp425.sourceforge.net/
-     ATM device driver for IXP425 that relies on Intel's libraries
-
-3. Known Issues/Limitations
-
-3a. Limited inbound PCI window
-
-The IXP4xx family allows for up to 256MB of memory but the PCI interface
-can only expose 64MB of that memory to the PCI bus. This means that if
-you are running with > 64MB, all PCI buffers outside of the accessible
-range will be bounced using the routines in arch/arm/common/dmabounce.c.
-
-3b. Limited outbound PCI window
-
-IXP4xx provides two methods of accessing PCI memory space:
-
-1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
-   To access PCI via this space, we simply ioremap() the BAR
-   into the kernel and we can use the standard read[bwl]/write[bwl]
-   macros. This is the preffered method due to speed but it
-   limits the system to just 64MB of PCI memory. This can be
-   problamatic if using video cards and other memory-heavy devices.
-
-2) If > 64MB of memory space is required, the IXP4xx can be
-   configured to use indirect registers to access PCI This allows
-   for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus.
-   The disadvantage of this is that every PCI access requires
-   three local register accesses plus a spinlock, but in some
-   cases the performance hit is acceptable. In addition, you cannot
-   mmap() PCI devices in this case due to the indirect nature
-   of the PCI window.
-
-By default, the direct method is used for performance reasons. If
-you need more PCI memory, enable the IXP4XX_INDIRECT_PCI config option.
-
-3c. GPIO as Interrupts
-
-Currently the code only handles level-sensitive GPIO interrupts
-
-4. Supported platforms
-
-ADI Engineering Coyote Gateway Reference Platform
-http://www.adiengineering.com/productsCoyote.html
-
-   The ADI Coyote platform is reference design for those building
-   small residential/office gateways. One NPE is connected to a 10/100
-   interface, one to 4-port 10/100 switch, and the third to and ADSL
-   interface. In addition, it also supports to POTs interfaces connected
-   via SLICs. Note that those are not supported by Linux ATM. Finally,
-   the platform has two mini-PCI slots used for 802.11[bga] cards.
-   Finally, there is an IDE port hanging off the expansion bus.
-
-Gateworks Avila Network Platform
-http://www.gateworks.com/support/overview.php
-
-   The Avila platform is basically and IXDP425 with the 4 PCI slots
-   replaced with mini-PCI slots and a CF IDE interface hanging off
-   the expansion bus.
-
-Intel IXDP425 Development Platform
-http://www.intel.com/design/network/products/npfamily/ixdpg425.htm
-
-   This is Intel's standard reference platform for the IXDP425 and is
-   also known as the Richfield board. It contains 4 PCI slots, 16MB
-   of flash, two 10/100 ports and one ADSL port.
-
-Intel IXDP465 Development Platform
-http://www.intel.com/design/network/products/npfamily/ixdp465.htm
-
-   This is basically an IXDP425 with an IXP465 and 32M of flash instead
-   of just 16.
-
-Intel IXDPG425 Development Platform
-
-   This is basically and ADI Coyote board with a NEC EHCI controller
-   added. One issue with this board is that the mini-PCI slots only
-   have the 3.3v line connected, so you can't use a PCI to mini-PCI
-   adapter with an E100 card. So to NFS root you need to use either
-   the CSR or a WiFi card and a ramdisk that BOOTPs and then does
-   a pivot_root to NFS.
-
-Motorola PrPMC1100 Processor Mezanine Card
-http://www.fountainsys.com
-
-   The PrPMC1100 is based on the IXCP1100 and is meant to plug into
-   and IXP2400/2800 system to act as the system controller. It simply
-   contains a CPU and 16MB of flash on the board and needs to be
-   plugged into a carrier board to function. Currently Linux only
-   supports the Motorola PrPMC carrier board for this platform.
-
-5. TODO LIST
-
-- Add support for Coyote IDE
-- Add support for edge-based GPIO interrupts
-- Add support for CF IDE on expansion bus
-
-6. Thanks
-
-The IXP4xx work has been funded by Intel Corp. and MontaVista Software, Inc.
-
-The following people have contributed patches/comments/etc:
-
-- Lennerty Buytenhek
-- Lutz Jaenicke
-- Justin Mayfield
-- Robert E. Ranslam
-
-[I know I've forgotten others, please email me to be added]
-
--------------------------------------------------------------------------
-
-Last Update: 01/04/2005
diff --git a/Documentation/arm/kernel_mode_neon.rst b/Documentation/arm/kernel_mode_neon.rst
deleted file mode 100644
index 9bfb71a2a9b96..0000000000000
--- a/Documentation/arm/kernel_mode_neon.rst
+++ /dev/null
@@ -1,124 +0,0 @@
-================
-Kernel mode NEON
-================
-
-TL;DR summary
--------------
-* Use only NEON instructions, or VFP instructions that don't rely on support
-  code
-* Isolate your NEON code in a separate compilation unit, and compile it with
-  '-march=armv7-a -mfpu=neon -mfloat-abi=softfp'
-* Put kernel_neon_begin() and kernel_neon_end() calls around the calls into your
-  NEON code
-* Don't sleep in your NEON code, and be aware that it will be executed with
-  preemption disabled
-
-
-Introduction
-------------
-It is possible to use NEON instructions (and in some cases, VFP instructions) in
-code that runs in kernel mode. However, for performance reasons, the NEON/VFP
-register file is not preserved and restored at every context switch or taken
-exception like the normal register file is, so some manual intervention is
-required. Furthermore, special care is required for code that may sleep [i.e.,
-may call schedule()], as NEON or VFP instructions will be executed in a
-non-preemptible section for reasons outlined below.
-
-
-Lazy preserve and restore
--------------------------
-The NEON/VFP register file is managed using lazy preserve (on UP systems) and
-lazy restore (on both SMP and UP systems). This means that the register file is
-kept 'live', and is only preserved and restored when multiple tasks are
-contending for the NEON/VFP unit (or, in the SMP case, when a task migrates to
-another core). Lazy restore is implemented by disabling the NEON/VFP unit after
-every context switch, resulting in a trap when subsequently a NEON/VFP
-instruction is issued, allowing the kernel to step in and perform the restore if
-necessary.
-
-Any use of the NEON/VFP unit in kernel mode should not interfere with this, so
-it is required to do an 'eager' preserve of the NEON/VFP register file, and
-enable the NEON/VFP unit explicitly so no exceptions are generated on first
-subsequent use. This is handled by the function kernel_neon_begin(), which
-should be called before any kernel mode NEON or VFP instructions are issued.
-Likewise, the NEON/VFP unit should be disabled again after use to make sure user
-mode will hit the lazy restore trap upon next use. This is handled by the
-function kernel_neon_end().
-
-
-Interruptions in kernel mode
-----------------------------
-For reasons of performance and simplicity, it was decided that there shall be no
-preserve/restore mechanism for the kernel mode NEON/VFP register contents. This
-implies that interruptions of a kernel mode NEON section can only be allowed if
-they are guaranteed not to touch the NEON/VFP registers. For this reason, the
-following rules and restrictions apply in the kernel:
-* NEON/VFP code is not allowed in interrupt context;
-* NEON/VFP code is not allowed to sleep;
-* NEON/VFP code is executed with preemption disabled.
-
-If latency is a concern, it is possible to put back to back calls to
-kernel_neon_end() and kernel_neon_begin() in places in your code where none of
-the NEON registers are live. (Additional calls to kernel_neon_begin() should be
-reasonably cheap if no context switch occurred in the meantime)
-
-
-VFP and support code
---------------------
-Earlier versions of VFP (prior to version 3) rely on software support for things
-like IEEE-754 compliant underflow handling etc. When the VFP unit needs such
-software assistance, it signals the kernel by raising an undefined instruction
-exception. The kernel responds by inspecting the VFP control registers and the
-current instruction and arguments, and emulates the instruction in software.
-
-Such software assistance is currently not implemented for VFP instructions
-executed in kernel mode. If such a condition is encountered, the kernel will
-fail and generate an OOPS.
-
-
-Separating NEON code from ordinary code
----------------------------------------
-The compiler is not aware of the special significance of kernel_neon_begin() and
-kernel_neon_end(), i.e., that it is only allowed to issue NEON/VFP instructions
-between calls to these respective functions. Furthermore, GCC may generate NEON
-instructions of its own at -O3 level if -mfpu=neon is selected, and even if the
-kernel is currently compiled at -O2, future changes may result in NEON/VFP
-instructions appearing in unexpected places if no special care is taken.
-
-Therefore, the recommended and only supported way of using NEON/VFP in the
-kernel is by adhering to the following rules:
-
-* isolate the NEON code in a separate compilation unit and compile it with
-  '-march=armv7-a -mfpu=neon -mfloat-abi=softfp';
-* issue the calls to kernel_neon_begin(), kernel_neon_end() as well as the calls
-  into the unit containing the NEON code from a compilation unit which is *not*
-  built with the GCC flag '-mfpu=neon' set.
-
-As the kernel is compiled with '-msoft-float', the above will guarantee that
-both NEON and VFP instructions will only ever appear in designated compilation
-units at any optimization level.
-
-
-NEON assembler
---------------
-NEON assembler is supported with no additional caveats as long as the rules
-above are followed.
-
-
-NEON code generated by GCC
---------------------------
-The GCC option -ftree-vectorize (implied by -O3) tries to exploit implicit
-parallelism, and generates NEON code from ordinary C source code. This is fully
-supported as long as the rules above are followed.
-
-
-NEON intrinsics
----------------
-NEON intrinsics are also supported. However, as code using NEON intrinsics
-relies on the GCC header <arm_neon.h>, (which #includes <stdint.h>), you should
-observe the following in addition to the rules above:
-
-* Compile the unit containing the NEON intrinsics with '-ffreestanding' so GCC
-  uses its builtin version of <stdint.h> (this is a C99 header which the kernel
-  does not supply);
-* Include <arm_neon.h> last, or at least after <linux/types.h>
diff --git a/Documentation/arm/kernel_user_helpers.rst b/Documentation/arm/kernel_user_helpers.rst
deleted file mode 100644
index eb6f3d9166227..0000000000000
--- a/Documentation/arm/kernel_user_helpers.rst
+++ /dev/null
@@ -1,268 +0,0 @@
-============================
-Kernel-provided User Helpers
-============================
-
-These are segment of kernel provided user code reachable from user space
-at a fixed address in kernel memory.  This is used to provide user space
-with some operations which require kernel help because of unimplemented
-native feature and/or instructions in many ARM CPUs. The idea is for this
-code to be executed directly in user mode for best efficiency but which is
-too intimate with the kernel counter part to be left to user libraries.
-In fact this code might even differ from one CPU to another depending on
-the available instruction set, or whether it is a SMP systems. In other
-words, the kernel reserves the right to change this code as needed without
-warning. Only the entry points and their results as documented here are
-guaranteed to be stable.
-
-This is different from (but doesn't preclude) a full blown VDSO
-implementation, however a VDSO would prevent some assembly tricks with
-constants that allows for efficient branching to those code segments. And
-since those code segments only use a few cycles before returning to user
-code, the overhead of a VDSO indirect far call would add a measurable
-overhead to such minimalistic operations.
-
-User space is expected to bypass those helpers and implement those things
-inline (either in the code emitted directly by the compiler, or part of
-the implementation of a library call) when optimizing for a recent enough
-processor that has the necessary native support, but only if resulting
-binaries are already to be incompatible with earlier ARM processors due to
-usage of similar native instructions for other things.  In other words
-don't make binaries unable to run on earlier processors just for the sake
-of not using these kernel helpers if your compiled code is not going to
-use new instructions for other purpose.
-
-New helpers may be added over time, so an older kernel may be missing some
-helpers present in a newer kernel.  For this reason, programs must check
-the value of __kuser_helper_version (see below) before assuming that it is
-safe to call any particular helper.  This check should ideally be
-performed only once at process startup time, and execution aborted early
-if the required helpers are not provided by the kernel version that
-process is running on.
-
-kuser_helper_version
---------------------
-
-Location:	0xffff0ffc
-
-Reference declaration::
-
-  extern int32_t __kuser_helper_version;
-
-Definition:
-
-  This field contains the number of helpers being implemented by the
-  running kernel.  User space may read this to determine the availability
-  of a particular helper.
-
-Usage example::
-
-  #define __kuser_helper_version (*(int32_t *)0xffff0ffc)
-
-  void check_kuser_version(void)
-  {
-	if (__kuser_helper_version < 2) {
-		fprintf(stderr, "can't do atomic operations, kernel too old\n");
-		abort();
-	}
-  }
-
-Notes:
-
-  User space may assume that the value of this field never changes
-  during the lifetime of any single process.  This means that this
-  field can be read once during the initialisation of a library or
-  startup phase of a program.
-
-kuser_get_tls
--------------
-
-Location:	0xffff0fe0
-
-Reference prototype::
-
-  void * __kuser_get_tls(void);
-
-Input:
-
-  lr = return address
-
-Output:
-
-  r0 = TLS value
-
-Clobbered registers:
-
-  none
-
-Definition:
-
-  Get the TLS value as previously set via the __ARM_NR_set_tls syscall.
-
-Usage example::
-
-  typedef void * (__kuser_get_tls_t)(void);
-  #define __kuser_get_tls (*(__kuser_get_tls_t *)0xffff0fe0)
-
-  void foo()
-  {
-	void *tls = __kuser_get_tls();
-	printf("TLS = %p\n", tls);
-  }
-
-Notes:
-
-  - Valid only if __kuser_helper_version >= 1 (from kernel version 2.6.12).
-
-kuser_cmpxchg
--------------
-
-Location:	0xffff0fc0
-
-Reference prototype::
-
-  int __kuser_cmpxchg(int32_t oldval, int32_t newval, volatile int32_t *ptr);
-
-Input:
-
-  r0 = oldval
-  r1 = newval
-  r2 = ptr
-  lr = return address
-
-Output:
-
-  r0 = success code (zero or non-zero)
-  C flag = set if r0 == 0, clear if r0 != 0
-
-Clobbered registers:
-
-  r3, ip, flags
-
-Definition:
-
-  Atomically store newval in `*ptr` only if `*ptr` is equal to oldval.
-  Return zero if `*ptr` was changed or non-zero if no exchange happened.
-  The C flag is also set if `*ptr` was changed to allow for assembly
-  optimization in the calling code.
-
-Usage example::
-
-  typedef int (__kuser_cmpxchg_t)(int oldval, int newval, volatile int *ptr);
-  #define __kuser_cmpxchg (*(__kuser_cmpxchg_t *)0xffff0fc0)
-
-  int atomic_add(volatile int *ptr, int val)
-  {
-	int old, new;
-
-	do {
-		old = *ptr;
-		new = old + val;
-	} while(__kuser_cmpxchg(old, new, ptr));
-
-	return new;
-  }
-
-Notes:
-
-  - This routine already includes memory barriers as needed.
-
-  - Valid only if __kuser_helper_version >= 2 (from kernel version 2.6.12).
-
-kuser_memory_barrier
---------------------
-
-Location:	0xffff0fa0
-
-Reference prototype::
-
-  void __kuser_memory_barrier(void);
-
-Input:
-
-  lr = return address
-
-Output:
-
-  none
-
-Clobbered registers:
-
-  none
-
-Definition:
-
-  Apply any needed memory barrier to preserve consistency with data modified
-  manually and __kuser_cmpxchg usage.
-
-Usage example::
-
-  typedef void (__kuser_dmb_t)(void);
-  #define __kuser_dmb (*(__kuser_dmb_t *)0xffff0fa0)
-
-Notes:
-
-  - Valid only if __kuser_helper_version >= 3 (from kernel version 2.6.15).
-
-kuser_cmpxchg64
----------------
-
-Location:	0xffff0f60
-
-Reference prototype::
-
-  int __kuser_cmpxchg64(const int64_t *oldval,
-                        const int64_t *newval,
-                        volatile int64_t *ptr);
-
-Input:
-
-  r0 = pointer to oldval
-  r1 = pointer to newval
-  r2 = pointer to target value
-  lr = return address
-
-Output:
-
-  r0 = success code (zero or non-zero)
-  C flag = set if r0 == 0, clear if r0 != 0
-
-Clobbered registers:
-
-  r3, lr, flags
-
-Definition:
-
-  Atomically store the 64-bit value pointed by `*newval` in `*ptr` only if `*ptr`
-  is equal to the 64-bit value pointed by `*oldval`.  Return zero if `*ptr` was
-  changed or non-zero if no exchange happened.
-
-  The C flag is also set if `*ptr` was changed to allow for assembly
-  optimization in the calling code.
-
-Usage example::
-
-  typedef int (__kuser_cmpxchg64_t)(const int64_t *oldval,
-                                    const int64_t *newval,
-                                    volatile int64_t *ptr);
-  #define __kuser_cmpxchg64 (*(__kuser_cmpxchg64_t *)0xffff0f60)
-
-  int64_t atomic_add64(volatile int64_t *ptr, int64_t val)
-  {
-	int64_t old, new;
-
-	do {
-		old = *ptr;
-		new = old + val;
-	} while(__kuser_cmpxchg64(&old, &new, ptr));
-
-	return new;
-  }
-
-Notes:
-
-  - This routine already includes memory barriers as needed.
-
-  - Due to the length of this sequence, this spans 2 conventional kuser
-    "slots", therefore 0xffff0f80 is not used as a valid entry point.
-
-  - Valid only if __kuser_helper_version >= 5 (from kernel version 3.1).
diff --git a/Documentation/arm/keystone/knav-qmss.rst b/Documentation/arm/keystone/knav-qmss.rst
deleted file mode 100644
index 7f7638d80b424..0000000000000
--- a/Documentation/arm/keystone/knav-qmss.rst
+++ /dev/null
@@ -1,60 +0,0 @@
-======================================================================
-Texas Instruments Keystone Navigator Queue Management SubSystem driver
-======================================================================
-
-Driver source code path
-  drivers/soc/ti/knav_qmss.c
-  drivers/soc/ti/knav_qmss_acc.c
-
-The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of
-the main hardware sub system which forms the backbone of the Keystone
-multi-core Navigator. QMSS consist of queue managers, packed-data structure
-processors(PDSP), linking RAM, descriptor pools and infrastructure
-Packet DMA.
-The Queue Manager is a hardware module that is responsible for accelerating
-management of the packet queues. Packets are queued/de-queued by writing or
-reading descriptor address to a particular memory mapped location. The PDSPs
-perform QMSS related functions like accumulation, QoS, or event management.
-Linking RAM registers are used to link the descriptors which are stored in
-descriptor RAM. Descriptor RAM is configurable as internal or external memory.
-The QMSS driver manages the PDSP setups, linking RAM regions,
-queue pool management (allocation, push, pop and notify) and descriptor
-pool management.
-
-knav qmss driver provides a set of APIs to drivers to open/close qmss queues,
-allocate descriptor pools, map the descriptors, push/pop to queues etc. For
-details of the available APIs, please refers to include/linux/soc/ti/knav_qmss.h
-
-DT documentation is available at
-Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
-
-Accumulator QMSS queues using PDSP firmware
-============================================
-The QMSS PDSP firmware support accumulator channel that can monitor a single
-queue or multiple contiguous queues. drivers/soc/ti/knav_qmss_acc.c is the
-driver that interface with the accumulator PDSP. This configures
-accumulator channels defined in DTS (example in DT documentation) to monitor
-1 or 32 queues per channel. More description on the firmware is available in
-CPPI/QMSS Low Level Driver document (docs/CPPI_QMSS_LLD_SDS.pdf) at
-
-	git://git.ti.com/keystone-rtos/qmss-lld.git
-
-k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
-channels. This firmware is available under ti-keystone folder of
-firmware.git at
-
-   git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
-
-To use copy the firmware image to lib/firmware folder of the initramfs or
-ubifs file system and provide a sym link to k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin
-in the file system and boot up the kernel. User would see
-
- "firmware file ks2_qmss_pdsp_acc48.bin downloaded for PDSP"
-
-in the boot up log if loading of firmware to PDSP is successful.
-
-Use of accumulated queues requires the firmware image to be present in the
-file system. The driver doesn't acc queues to the supported queue range if
-PDSP is not running in the SoC. The API call fails if there is a queue open
-request to an acc queue and PDSP is not running. So make sure to copy firmware
-to file system before using these queue types.
diff --git a/Documentation/arm/keystone/overview.rst b/Documentation/arm/keystone/overview.rst
deleted file mode 100644
index cd90298c493c7..0000000000000
--- a/Documentation/arm/keystone/overview.rst
+++ /dev/null
@@ -1,74 +0,0 @@
-==========================
-TI Keystone Linux Overview
-==========================
-
-Introduction
-------------
-Keystone range of SoCs are based on ARM Cortex-A15 MPCore Processors
-and c66x DSP cores. This document describes essential information required
-for users to run Linux on Keystone based EVMs from Texas Instruments.
-
-Following SoCs  & EVMs are currently supported:-
-
-K2HK SoC and EVM
-=================
-
-a.k.a Keystone 2 Hawking/Kepler SoC
-TCI6636K2H & TCI6636K2K: See documentation at
-
-	http://www.ti.com/product/tci6638k2k
-	http://www.ti.com/product/tci6638k2h
-
-EVM:
-  http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
-
-K2E SoC and EVM
-===============
-
-a.k.a Keystone 2 Edison SoC
-
-K2E  -  66AK2E05:
-
-See documentation at
-
-	http://www.ti.com/product/66AK2E05/technicaldocuments
-
-EVM:
-   https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
-
-K2L SoC and EVM
-===============
-
-a.k.a Keystone 2 Lamarr SoC
-
-K2L  -  TCI6630K2L:
-
-See documentation at
-	http://www.ti.com/product/TCI6630K2L/technicaldocuments
-
-EVM:
-  https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
-
-Configuration
--------------
-
-All of the K2 SoCs/EVMs share a common defconfig, keystone_defconfig and same
-image is used to boot on individual EVMs. The platform configuration is
-specified through DTS. Following are the DTS used:
-
-	K2HK EVM:
-		k2hk-evm.dts
-	K2E EVM:
-		k2e-evm.dts
-	K2L EVM:
-		k2l-evm.dts
-
-The device tree documentation for the keystone machines are located at
-
-        Documentation/devicetree/bindings/arm/keystone/keystone.txt
-
-Document Author
----------------
-Murali Karicheri <m-karicheri2@ti.com>
-
-Copyright 2015 Texas Instruments
diff --git a/Documentation/arm/marvell.rst b/Documentation/arm/marvell.rst
deleted file mode 100644
index 3d369a5660382..0000000000000
--- a/Documentation/arm/marvell.rst
+++ /dev/null
@@ -1,527 +0,0 @@
-================
-ARM Marvell SoCs
-================
-
-This document lists all the ARM Marvell SoCs that are currently
-supported in mainline by the Linux kernel. As the Marvell families of
-SoCs are large and complex, it is hard to understand where the support
-for a particular SoC is available in the Linux kernel. This document
-tries to help in understanding where those SoCs are supported, and to
-match them with their corresponding public datasheet, when available.
-
-Orion family
-------------
-
-  Flavors:
-        - 88F5082
-        - 88F5181  a.k.a Orion-1
-        - 88F5181L a.k.a Orion-VoIP
-        - 88F5182  a.k.a Orion-NAS
-
-               - Datasheet: https://web.archive.org/web/20210124231420/http://csclub.uwaterloo.ca/~board/ts7800/MV88F5182-datasheet.pdf
-               - Programmer's User Guide: https://web.archive.org/web/20210124231536/http://csclub.uwaterloo.ca/~board/ts7800/MV88F5182-opensource-manual.pdf
-               - User Manual: https://web.archive.org/web/20210124231631/http://csclub.uwaterloo.ca/~board/ts7800/MV88F5182-usermanual.pdf
-               - Functional Errata: https://web.archive.org/web/20210704165540/https://www.digriz.org.uk/ts78xx/88F5182_Functional_Errata.pdf
-        - 88F5281  a.k.a Orion-2
-
-               - Datasheet: https://web.archive.org/web/20131028144728/http://www.ocmodshop.com/images/reviews/networking/qnap_ts409u/marvel_88f5281_data_sheet.pdf
-        - 88F6183  a.k.a Orion-1-90
-  Homepage:
-        https://web.archive.org/web/20080607215437/http://www.marvell.com/products/media/index.jsp
-  Core:
-	Feroceon 88fr331 (88f51xx) or 88fr531-vd (88f52xx) ARMv5 compatible
-  Linux kernel mach directory:
-	arch/arm/mach-orion5x
-  Linux kernel plat directory:
-	arch/arm/plat-orion
-
-Kirkwood family
----------------
-
-  Flavors:
-        - 88F6282 a.k.a Armada 300
-
-                - Product Brief  : https://web.archive.org/web/20111027032509/http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
-        - 88F6283 a.k.a Armada 310
-
-                - Product Brief  : https://web.archive.org/web/20111027032509/http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
-        - 88F6190
-
-                - Product Brief  : https://web.archive.org/web/20130730072715/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6190-003_WEB.pdf
-                - Hardware Spec  : https://web.archive.org/web/20121021182835/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
-                - Functional Spec: https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
-        - 88F6192
-
-                - Product Brief  : https://web.archive.org/web/20131113121446/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6192-003_ver1.pdf
-                - Hardware Spec  : https://web.archive.org/web/20121021182835/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
-                - Functional Spec: https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
-        - 88F6182
-        - 88F6180
-
-                - Product Brief  : https://web.archive.org/web/20120616201621/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6180-003_ver1.pdf
-                - Hardware Spec  : https://web.archive.org/web/20130730091654/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf
-                - Functional Spec: https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
-        - 88F6280
-
-                - Product Brief  : https://web.archive.org/web/20130730091058/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6280_SoC_PB-001.pdf
-        - 88F6281
-
-                - Product Brief  : https://web.archive.org/web/20120131133709/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6281-004_ver1.pdf
-                - Hardware Spec  : https://web.archive.org/web/20120620073511/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf
-                - Functional Spec: https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
-        - 88F6321
-        - 88F6322
-        - 88F6323
-
-                - Product Brief  : https://web.archive.org/web/20120616201639/http://www.marvell.com/embedded-processors/kirkwood/assets/88f632x_pb.pdf
-  Homepage:
-	https://web.archive.org/web/20160513194943/http://www.marvell.com/embedded-processors/kirkwood/
-  Core:
-	Feroceon 88fr131 ARMv5 compatible
-  Linux kernel mach directory:
-	arch/arm/mach-mvebu
-  Linux kernel plat directory:
-	none
-
-Discovery family
-----------------
-
-  Flavors:
-        - MV78100
-
-                - Product Brief  : https://web.archive.org/web/20120616194711/http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78100-003_WEB.pdf
-                - Hardware Spec  : https://web.archive.org/web/20141005120451/http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78100_OpenSource.pdf
-                - Functional Spec: https://web.archive.org/web/20111110081125/http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
-        - MV78200
-
-                - Product Brief  : https://web.archive.org/web/20140801121623/http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78200-002_WEB.pdf
-                - Hardware Spec  : https://web.archive.org/web/20141005120458/http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78200_OpenSource.pdf
-                - Functional Spec: https://web.archive.org/web/20111110081125/http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
-
-        - MV76100
-
-                - Product Brief  : https://web.archive.org/web/20140722064429/http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV76100-002_WEB.pdf
-                - Hardware Spec  : https://web.archive.org/web/20140722064425/http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV76100_OpenSource.pdf
-                - Functional Spec: https://web.archive.org/web/20111110081125/http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
-
-                Not supported by the Linux kernel.
-
-  Homepage:
-        https://web.archive.org/web/20110924171043/http://www.marvell.com/embedded-processors/discovery-innovation/
-  Core:
-	Feroceon 88fr571-vd ARMv5 compatible
-
-  Linux kernel mach directory:
-	arch/arm/mach-mv78xx0
-  Linux kernel plat directory:
-	arch/arm/plat-orion
-
-EBU Armada family
------------------
-
-  Armada 370 Flavors:
-        - 88F6710
-        - 88F6707
-        - 88F6W11
-
-    - Product infos:   https://web.archive.org/web/20141002083258/http://www.marvell.com/embedded-processors/armada-370/
-    - Product Brief:   https://web.archive.org/web/20121115063038/http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf
-    - Hardware Spec:   https://web.archive.org/web/20140617183747/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-datasheet.pdf
-    - Functional Spec: https://web.archive.org/web/20140617183701/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-FunctionalSpec-datasheet.pdf
-
-  Core:
-	Sheeva ARMv7 compatible PJ4B
-
-  Armada XP Flavors:
-        - MV78230
-        - MV78260
-        - MV78460
-
-    NOTE:
-	not to be confused with the non-SMP 78xx0 SoCs
-
-    - Product infos:   https://web.archive.org/web/20150101215721/http://www.marvell.com/embedded-processors/armada-xp/
-    - Product Brief:   https://web.archive.org/web/20121021173528/http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
-    - Functional Spec: https://web.archive.org/web/20180829171131/http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf
-    - Hardware Specs:
-        - https://web.archive.org/web/20141127013651/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78230_OS.PDF
-        - https://web.archive.org/web/20141222000224/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78260_OS.PDF
-        - https://web.archive.org/web/20141222000230/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78460_OS.PDF
-
-  Core:
-	Sheeva ARMv7 compatible Dual-core or Quad-core PJ4B-MP
-
-  Armada 375 Flavors:
-	- 88F6720
-
-    - Product infos: https://web.archive.org/web/20140108032402/http://www.marvell.com/embedded-processors/armada-375/
-    - Product Brief: https://web.archive.org/web/20131216023516/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA_375_SoC-01_product_brief.pdf
-
-  Core:
-	ARM Cortex-A9
-
-  Armada 38x Flavors:
-	- 88F6810	Armada 380
-	- 88F6811 Armada 381
-	- 88F6821 Armada 382
-	- 88F6W21 Armada 383
-	- 88F6820 Armada 385
-	- 88F6825
-	- 88F6828 Armada 388
-
-    - Product infos:   https://web.archive.org/web/20181006144616/http://www.marvell.com/embedded-processors/armada-38x/
-    - Functional Spec: https://web.archive.org/web/20200420191927/https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-embedded-processors-armada-38x-functional-specifications-2015-11.pdf
-    - Hardware Spec:   https://web.archive.org/web/20180713105318/https://www.marvell.com/docs/embedded-processors/assets/marvell-embedded-processors-armada-38x-hardware-specifications-2017-03.pdf
-    - Design guide:    https://web.archive.org/web/20180712231737/https://www.marvell.com/docs/embedded-processors/assets/marvell-embedded-processors-armada-38x-hardware-design-guide-2017-08.pdf
-
-  Core:
-	ARM Cortex-A9
-
-  Armada 39x Flavors:
-	- 88F6920 Armada 390
-	- 88F6925 Armada 395
-	- 88F6928 Armada 398
-
-    - Product infos: https://web.archive.org/web/20181020222559/http://www.marvell.com/embedded-processors/armada-39x/
-
-  Core:
-	ARM Cortex-A9
-
-  Linux kernel mach directory:
-	arch/arm/mach-mvebu
-  Linux kernel plat directory:
-	none
-
-EBU Armada family ARMv8
------------------------
-
-  Armada 3710/3720 Flavors:
-	- 88F3710
-	- 88F3720
-
-  Core:
-	ARM Cortex A53 (ARMv8)
-
-  Homepage:
-	https://web.archive.org/web/20181103003602/http://www.marvell.com/embedded-processors/armada-3700/
-
-  Product Brief:
-	https://web.archive.org/web/20210121194810/https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-embedded-processors-armada-37xx-product-brief-2016-01.pdf
-
-  Hardware Spec:
-	https://web.archive.org/web/20210202162011/http://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-embedded-processors-armada-37xx-hardware-specifications-2019-09.pdf
-
-  Device tree files:
-	arch/arm64/boot/dts/marvell/armada-37*
-
-  Armada 7K Flavors:
-	  - 88F6040 (AP806 Quad 600 MHz + one CP110)
-	  - 88F7020 (AP806 Dual + one CP110)
-	  - 88F7040 (AP806 Quad + one CP110)
-
-  Core: ARM Cortex A72
-
-  Homepage:
-	https://web.archive.org/web/20181020222606/http://www.marvell.com/embedded-processors/armada-70xx/
-
-  Product Brief:
-	  - https://web.archive.org/web/20161010105541/http://www.marvell.com/embedded-processors/assets/Armada7020PB-Jan2016.pdf
-	  - https://web.archive.org/web/20160928154533/http://www.marvell.com/embedded-processors/assets/Armada7040PB-Jan2016.pdf
-
-  Device tree files:
-	arch/arm64/boot/dts/marvell/armada-70*
-
-  Armada 8K Flavors:
-	- 88F8020 (AP806 Dual + two CP110)
-	- 88F8040 (AP806 Quad + two CP110)
-  Core:
-	ARM Cortex A72
-
-  Homepage:
-	https://web.archive.org/web/20181022004830/http://www.marvell.com/embedded-processors/armada-80xx/
-
-  Product Brief:
-	  - https://web.archive.org/web/20210124233728/https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-embedded-processors-armada-8020-product-brief-2017-12.pdf
-	  - https://web.archive.org/web/20161010105532/http://www.marvell.com/embedded-processors/assets/Armada8040PB-Jan2016.pdf
-
-  Device tree files:
-	arch/arm64/boot/dts/marvell/armada-80*
-
-  Octeon TX2 CN913x Flavors:
-	- CN9130 (AP807 Quad + one internal CP115)
-	- CN9131 (AP807 Quad + one internal CP115 + one external CP115 / 88F8215)
-	- CN9132 (AP807 Quad + one internal CP115 + two external CP115 / 88F8215)
-
-  Core:
-	ARM Cortex A72
-
-  Homepage:
-	https://web.archive.org/web/20200803150818/https://www.marvell.com/products/infrastructure-processors/multi-core-processors/octeon-tx2/octeon-tx2-cn9130.html
-
-  Product Brief:
-	https://web.archive.org/web/20200803150818/https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-infrastructure-processors-octeon-tx2-cn913x-product-brief-2020-02.pdf
-
-  Device tree files:
-	arch/arm64/boot/dts/marvell/cn913*
-
-Avanta family
--------------
-
-  Flavors:
-       - 88F6500
-       - 88F6510
-       - 88F6530P
-       - 88F6550
-       - 88F6560
-       - 88F6601
-
-  Homepage:
-	https://web.archive.org/web/20181005145041/http://www.marvell.com/broadband/
-
-  Product Brief:
-	https://web.archive.org/web/20180829171057/http://www.marvell.com/broadband/assets/Marvell_Avanta_88F6510_305_060-001_product_brief.pdf
-
-  No public datasheet available.
-
-  Core:
-	ARMv5 compatible
-
-  Linux kernel mach directory:
-	no code in mainline yet, planned for the future
-  Linux kernel plat directory:
-	no code in mainline yet, planned for the future
-
-Storage family
---------------
-
-  Armada SP:
-	- 88RC1580
-
-  Product infos:
-	https://web.archive.org/web/20191129073953/http://www.marvell.com/storage/armada-sp/
-
-  Core:
-	Sheeva ARMv7 compatible Quad-core PJ4C
-
-  (not supported in upstream Linux kernel)
-
-Dove family (application processor)
------------------------------------
-
-  Flavors:
-        - 88AP510 a.k.a Armada 510
-
-   Product Brief:
-	https://web.archive.org/web/20111102020643/http://www.marvell.com/application-processors/armada-500/assets/Marvell_Armada510_SoC.pdf
-
-   Hardware Spec:
-	https://web.archive.org/web/20160428160231/http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Hardware-Spec.pdf
-
-  Functional Spec:
-	https://web.archive.org/web/20120130172443/http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf
-
-  Homepage:
-	https://web.archive.org/web/20160822232651/http://www.marvell.com/application-processors/armada-500/
-
-  Core:
-	ARMv7 compatible
-
-  Directory:
-	- arch/arm/mach-mvebu (DT enabled platforms)
-        - arch/arm/mach-dove (non-DT enabled platforms)
-
-PXA 2xx/3xx/93x/95x family
---------------------------
-
-  Flavors:
-        - PXA21x, PXA25x, PXA26x
-             - Application processor only
-             - Core: ARMv5 XScale1 core
-        - PXA270, PXA271, PXA272
-             - Product Brief         : https://web.archive.org/web/20150927135510/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_pb.pdf
-             - Design guide          : https://web.archive.org/web/20120111181937/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_design_guide.pdf
-             - Developers manual     : https://web.archive.org/web/20150927164805/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_dev_man.pdf
-             - Specification         : https://web.archive.org/web/20140211221535/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_emts.pdf
-             - Specification update  : https://web.archive.org/web/20120111104906/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf
-             - Application processor only
-             - Core: ARMv5 XScale2 core
-        - PXA300, PXA310, PXA320
-             - PXA 300 Product Brief : https://web.archive.org/web/20120111121203/http://www.marvell.com/application-processors/pxa-family/assets/PXA300_PB_R4.pdf
-             - PXA 310 Product Brief : https://web.archive.org/web/20120111104515/http://www.marvell.com/application-processors/pxa-family/assets/PXA310_PB_R4.pdf
-             - PXA 320 Product Brief : https://web.archive.org/web/20121021182826/http://www.marvell.com/application-processors/pxa-family/assets/PXA320_PB_R4.pdf
-             - Design guide          : https://web.archive.org/web/20130727144625/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Design_Guide.pdf
-             - Developers manual     : https://web.archive.org/web/20130727144605/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Developers_Manual.zip
-             - Specifications        : https://web.archive.org/web/20130727144559/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_EMTS.pdf
-             - Specification Update  : https://web.archive.org/web/20150927183411/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Spec_Update.zip
-             - Reference Manual      : https://web.archive.org/web/20120111103844/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_TavorP_BootROM_Ref_Manual.pdf
-             - Application processor only
-             - Core: ARMv5 XScale3 core
-        - PXA930, PXA935
-             - Application processor with Communication processor
-             - Core: ARMv5 XScale3 core
-        - PXA955
-             - Application processor with Communication processor
-             - Core: ARMv7 compatible Sheeva PJ4 core
-
-   Comments:
-
-    * This line of SoCs originates from the XScale family developed by
-      Intel and acquired by Marvell in ~2006. The PXA21x, PXA25x,
-      PXA26x, PXA27x, PXA3xx and PXA93x were developed by Intel, while
-      the later PXA95x were developed by Marvell.
-
-    * Due to their XScale origin, these SoCs have virtually nothing in
-      common with the other (Kirkwood, Dove, etc.) families of Marvell
-      SoCs, except with the MMP/MMP2 family of SoCs.
-
-   Linux kernel mach directory:
-	arch/arm/mach-pxa
-
-MMP/MMP2/MMP3 family (communication processor)
-----------------------------------------------
-
-   Flavors:
-        - PXA168, a.k.a Armada 168
-             - Homepage             : https://web.archive.org/web/20110926014256/http://www.marvell.com/application-processors/armada-100/armada-168.jsp
-             - Product brief        : https://web.archive.org/web/20111102030100/http://www.marvell.com/application-processors/armada-100/assets/pxa_168_pb.pdf
-             - Hardware manual      : https://web.archive.org/web/20160428165359/http://www.marvell.com/application-processors/armada-100/assets/armada_16x_datasheet.pdf
-             - Software manual      : https://web.archive.org/web/20160428154454/http://www.marvell.com/application-processors/armada-100/assets/armada_16x_software_manual.pdf
-             - Specification update : https://web.archive.org/web/20150927160338/http://www.marvell.com/application-processors/armada-100/assets/ARMADA16x_Spec_update.pdf
-             - Boot ROM manual      : https://web.archive.org/web/20130727205559/http://www.marvell.com/application-processors/armada-100/assets/armada_16x_ref_manual.pdf
-             - App node package     : https://web.archive.org/web/20141005090706/http://www.marvell.com/application-processors/armada-100/assets/armada_16x_app_note_package.pdf
-             - Application processor only
-             - Core: ARMv5 compatible Marvell PJ1 88sv331 (Mohawk)
-        - PXA910/PXA920
-             - Homepage             : https://web.archive.org/web/20150928121236/http://www.marvell.com/communication-processors/pxa910/
-             - Product Brief        : https://archive.org/download/marvell-pxa910-pb/Marvell_PXA910_Platform-001_PB.pdf
-             - Application processor with Communication processor
-             - Core: ARMv5 compatible Marvell PJ1 88sv331 (Mohawk)
-        - PXA688, a.k.a. MMP2, a.k.a Armada 610 (OLPC XO-1.75)
-             - Product Brief        : https://web.archive.org/web/20111102023255/http://www.marvell.com/application-processors/armada-600/assets/armada610_pb.pdf
-             - Application processor only
-             - Core: ARMv7 compatible Sheeva PJ4 88sv581x core
-	- PXA2128, a.k.a. MMP3, a.k.a Armada 620 (OLPC XO-4)
-	     - Product Brief	    : https://web.archive.org/web/20120824055155/http://www.marvell.com/application-processors/armada/pxa2128/assets/Marvell-ARMADA-PXA2128-SoC-PB.pdf
-	     - Application processor only
-	     - Core: Dual-core ARMv7 compatible Sheeva PJ4C core
-	- PXA960/PXA968/PXA978 (Linux support not upstream)
-	     - Application processor with Communication Processor
-	     - Core: ARMv7 compatible Sheeva PJ4 core
-	- PXA986/PXA988 (Linux support not upstream)
-	     - Application processor with Communication Processor
-	     - Core: Dual-core ARMv7 compatible Sheeva PJ4B-MP core
-	- PXA1088/PXA1920 (Linux support not upstream)
-	     - Application processor with Communication Processor
-	     - Core: quad-core ARMv7 Cortex-A7
-	- PXA1908/PXA1928/PXA1936
-	     - Application processor with Communication Processor
-	     - Core: multi-core ARMv8 Cortex-A53
-
-   Comments:
-
-    * This line of SoCs originates from the XScale family developed by
-      Intel and acquired by Marvell in ~2006. All the processors of
-      this MMP/MMP2 family were developed by Marvell.
-
-    * Due to their XScale origin, these SoCs have virtually nothing in
-      common with the other (Kirkwood, Dove, etc.) families of Marvell
-      SoCs, except with the PXA family of SoCs listed above.
-
-   Linux kernel mach directory:
-	arch/arm/mach-mmp
-
-Berlin family (Multimedia Solutions)
--------------------------------------
-
-  - Flavors:
-	- 88DE3010, Armada 1000 (no Linux support)
-		- Core:		Marvell PJ1 (ARMv5TE), Dual-core
-		- Product Brief:	https://web.archive.org/web/20131103162620/http://www.marvell.com/digital-entertainment/assets/armada_1000_pb.pdf
-	- 88DE3005, Armada 1500 Mini
-		- Design name:	BG2CD
-		- Core:		ARM Cortex-A9, PL310 L2CC
-	- 88DE3006, Armada 1500 Mini Plus
-		- Design name:	BG2CDP
-		- Core:		Dual Core ARM Cortex-A7
-	- 88DE3100, Armada 1500
-		- Design name:	BG2
-		- Core:		Marvell PJ4B-MP (ARMv7), Tauros3 L2CC
-	- 88DE3114, Armada 1500 Pro
-		- Design name:	BG2Q
-		- Core:		Quad Core ARM Cortex-A9, PL310 L2CC
-	- 88DE3214, Armada 1500 Pro 4K
-		- Design name:	BG3
-		- Core:		ARM Cortex-A15, CA15 integrated L2CC
-	- 88DE3218, ARMADA 1500 Ultra
-		- Core:		ARM Cortex-A53
-
-  Homepage: https://www.synaptics.com/products/multimedia-solutions
-  Directory: arch/arm/mach-berlin
-
-  Comments:
-
-   * This line of SoCs is based on Marvell Sheeva or ARM Cortex CPUs
-     with Synopsys DesignWare (IRQ, GPIO, Timers, ...) and PXA IP (SDHCI, USB, ETH, ...).
-
-   * The Berlin family was acquired by Synaptics from Marvell in 2017.
-
-CPU Cores
----------
-
-The XScale cores were designed by Intel, and shipped by Marvell in the older
-PXA processors. Feroceon is a Marvell designed core that developed in-house,
-and that evolved into Sheeva. The XScale and Feroceon cores were phased out
-over time and replaced with Sheeva cores in later products, which subsequently
-got replaced with licensed ARM Cortex-A cores.
-
-  XScale 1
-	CPUID 0x69052xxx
-	ARMv5, iWMMXt
-  XScale 2
-	CPUID 0x69054xxx
-	ARMv5, iWMMXt
-  XScale 3
-	CPUID 0x69056xxx or 0x69056xxx
-	ARMv5, iWMMXt
-  Feroceon-1850 88fr331 "Mohawk"
-	CPUID 0x5615331x or 0x41xx926x
-	ARMv5TE, single issue
-  Feroceon-2850 88fr531-vd "Jolteon"
-	CPUID 0x5605531x or 0x41xx926x
-	ARMv5TE, VFP, dual-issue
-  Feroceon 88fr571-vd "Jolteon"
-	CPUID 0x5615571x
-	ARMv5TE, VFP, dual-issue
-  Feroceon 88fr131 "Mohawk-D"
-	CPUID 0x5625131x
-	ARMv5TE, single-issue in-order
-  Sheeva PJ1 88sv331 "Mohawk"
-	CPUID 0x561584xx
-	ARMv5, single-issue iWMMXt v2
-  Sheeva PJ4 88sv581x "Flareon"
-	CPUID 0x560f581x
-	ARMv7, idivt, optional iWMMXt v2
-  Sheeva PJ4B 88sv581x
-	CPUID 0x561f581x
-	ARMv7, idivt, optional iWMMXt v2
-  Sheeva PJ4B-MP / PJ4C
-	CPUID 0x562f584x
-	ARMv7, idivt/idiva, LPAE, optional iWMMXt v2 and/or NEON
-
-Long-term plans
----------------
-
- * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ into the
-   mach-mvebu/ to support all SoCs from the Marvell EBU (Engineering
-   Business Unit) in a single mach-<foo> directory. The plat-orion/
-   would therefore disappear.
-
-Credits
--------
-
-- Maen Suleiman <maen@marvell.com>
-- Lior Amsalem <alior@marvell.com>
-- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-- Andrew Lunn <andrew@lunn.ch>
-- Nicolas Pitre <nico@fluxnic.net>
-- Eric Miao <eric.y.miao@gmail.com>
diff --git a/Documentation/arm/mem_alignment.rst b/Documentation/arm/mem_alignment.rst
deleted file mode 100644
index aa22893b62bc3..0000000000000
--- a/Documentation/arm/mem_alignment.rst
+++ /dev/null
@@ -1,63 +0,0 @@
-================
-Memory alignment
-================
-
-Too many problems popped up because of unnoticed misaligned memory access in
-kernel code lately.  Therefore the alignment fixup is now unconditionally
-configured in for SA11x0 based targets.  According to Alan Cox, this is a
-bad idea to configure it out, but Russell King has some good reasons for
-doing so on some f***ed up ARM architectures like the EBSA110.  However
-this is not the case on many design I'm aware of, like all SA11x0 based
-ones.
-
-Of course this is a bad idea to rely on the alignment trap to perform
-unaligned memory access in general.  If those access are predictable, you
-are better to use the macros provided by include/asm/unaligned.h.  The
-alignment trap can fixup misaligned access for the exception cases, but at
-a high performance cost.  It better be rare.
-
-Now for user space applications, it is possible to configure the alignment
-trap to SIGBUS any code performing unaligned access (good for debugging bad
-code), or even fixup the access by software like for kernel code.  The later
-mode isn't recommended for performance reasons (just think about the
-floating point emulation that works about the same way).  Fix your code
-instead!
-
-Please note that randomly changing the behaviour without good thought is
-real bad - it changes the behaviour of all unaligned instructions in user
-space, and might cause programs to fail unexpectedly.
-
-To change the alignment trap behavior, simply echo a number into
-/proc/cpu/alignment.  The number is made up from various bits:
-
-===		========================================================
-bit		behavior when set
-===		========================================================
-0		A user process performing an unaligned memory access
-		will cause the kernel to print a message indicating
-		process name, pid, pc, instruction, address, and the
-		fault code.
-
-1		The kernel will attempt to fix up the user process
-		performing the unaligned access.  This is of course
-		slow (think about the floating point emulator) and
-		not recommended for production use.
-
-2		The kernel will send a SIGBUS signal to the user process
-		performing the unaligned access.
-===		========================================================
-
-Note that not all combinations are supported - only values 0 through 5.
-(6 and 7 don't make sense).
-
-For example, the following will turn on the warnings, but without
-fixing up or sending SIGBUS signals::
-
-	echo 1 > /proc/cpu/alignment
-
-You can also read the content of the same file to get statistical
-information on unaligned access occurrences plus the current mode of
-operation for user space code.
-
-
-Nicolas Pitre, Mar 13, 2001.  Modified Russell King, Nov 30, 2001.
diff --git a/Documentation/arm/memory.rst b/Documentation/arm/memory.rst
deleted file mode 100644
index 0cb1e29388234..0000000000000
--- a/Documentation/arm/memory.rst
+++ /dev/null
@@ -1,103 +0,0 @@
-=================================
-Kernel Memory Layout on ARM Linux
-=================================
-
-		Russell King <rmk@arm.linux.org.uk>
-
-		     November 17, 2005 (2.6.15)
-
-This document describes the virtual memory layout which the Linux
-kernel uses for ARM processors.  It indicates which regions are
-free for platforms to use, and which are used by generic code.
-
-The ARM CPU is capable of addressing a maximum of 4GB virtual memory
-space, and this must be shared between user space processes, the
-kernel, and hardware devices.
-
-As the ARM architecture matures, it becomes necessary to reserve
-certain regions of VM space for use for new facilities; therefore
-this document may reserve more VM space over time.
-
-=============== =============== ===============================================
-Start		End		Use
-=============== =============== ===============================================
-ffff8000	ffffffff	copy_user_page / clear_user_page use.
-				For SA11xx and Xscale, this is used to
-				setup a minicache mapping.
-
-ffff4000	ffffffff	cache aliasing on ARMv6 and later CPUs.
-
-ffff1000	ffff7fff	Reserved.
-				Platforms must not use this address range.
-
-ffff0000	ffff0fff	CPU vector page.
-				The CPU vectors are mapped here if the
-				CPU supports vector relocation (control
-				register V bit.)
-
-fffe0000	fffeffff	XScale cache flush area.  This is used
-				in proc-xscale.S to flush the whole data
-				cache. (XScale does not have TCM.)
-
-fffe8000	fffeffff	DTCM mapping area for platforms with
-				DTCM mounted inside the CPU.
-
-fffe0000	fffe7fff	ITCM mapping area for platforms with
-				ITCM mounted inside the CPU.
-
-ffc80000	ffefffff	Fixmap mapping region.  Addresses provided
-				by fix_to_virt() will be located here.
-
-ffc00000	ffc7ffff	Guard region
-
-ff800000	ffbfffff	Permanent, fixed read-only mapping of the
-				firmware provided DT blob
-
-fee00000	feffffff	Mapping of PCI I/O space. This is a static
-				mapping within the vmalloc space.
-
-VMALLOC_START	VMALLOC_END-1	vmalloc() / ioremap() space.
-				Memory returned by vmalloc/ioremap will
-				be dynamically placed in this region.
-				Machine specific static mappings are also
-				located here through iotable_init().
-				VMALLOC_START is based upon the value
-				of the high_memory variable, and VMALLOC_END
-				is equal to 0xff800000.
-
-PAGE_OFFSET	high_memory-1	Kernel direct-mapped RAM region.
-				This maps the platforms RAM, and typically
-				maps all platform RAM in a 1:1 relationship.
-
-PKMAP_BASE	PAGE_OFFSET-1	Permanent kernel mappings
-				One way of mapping HIGHMEM pages into kernel
-				space.
-
-MODULES_VADDR	MODULES_END-1	Kernel module space
-				Kernel modules inserted via insmod are
-				placed here using dynamic mappings.
-
-TASK_SIZE	MODULES_VADDR-1	KASAn shadow memory when KASan is in use.
-				The range from MODULES_VADDR to the top
-				of the memory is shadowed here with 1 bit
-				per byte of memory.
-
-00001000	TASK_SIZE-1	User space mappings
-				Per-thread mappings are placed here via
-				the mmap() system call.
-
-00000000	00000fff	CPU vector page / null pointer trap
-				CPUs which do not support vector remapping
-				place their vector page here.  NULL pointer
-				dereferences by both the kernel and user
-				space are also caught via this mapping.
-=============== =============== ===============================================
-
-Please note that mappings which collide with the above areas may result
-in a non-bootable kernel, or may cause the kernel to (eventually) panic
-at run time.
-
-Since future CPUs may impact the kernel mapping layout, user programs
-must not access any memory which is not mapped inside their 0x0001000
-to TASK_SIZE address range.  If they wish to access these areas, they
-must set up their own mappings using open() and mmap().
diff --git a/Documentation/arm/microchip.rst b/Documentation/arm/microchip.rst
deleted file mode 100644
index e721d855f2c95..0000000000000
--- a/Documentation/arm/microchip.rst
+++ /dev/null
@@ -1,230 +0,0 @@
-=============================
-ARM Microchip SoCs (aka AT91)
-=============================
-
-
-Introduction
-------------
-This document gives useful information about the ARM Microchip SoCs that are
-currently supported in Linux Mainline (you know, the one on kernel.org).
-
-It is important to note that the Microchip (previously Atmel) ARM-based MPU
-product line is historically named "AT91" or "at91" throughout the Linux kernel
-development process even if this product prefix has completely disappeared from
-the official Microchip product name. Anyway, files, directories, git trees,
-git branches/tags and email subject always contain this "at91" sub-string.
-
-
-AT91 SoCs
----------
-Documentation and detailed datasheet for each product are available on
-the Microchip website: http://www.microchip.com.
-
-  Flavors:
-    * ARM 920 based SoC
-      - at91rm9200
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-1768-32-bit-ARM920T-Embedded-Microprocessor-AT91RM9200_Datasheet.pdf
-
-    * ARM 926 based SoCs
-      - at91sam9260
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6221-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9260_Datasheet.pdf
-
-      - at91sam9xe
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6254-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9XE_Datasheet.pdf
-
-      - at91sam9261
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6062-ARM926EJ-S-Microprocessor-SAM9261_Datasheet.pdf
-
-      - at91sam9263
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6249-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9263_Datasheet.pdf
-
-      - at91sam9rl
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/doc6289.pdf
-
-      - at91sam9g20
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001516A.pdf
-
-      - at91sam9g45 family
-        - at91sam9g45
-        - at91sam9g46
-        - at91sam9m10
-        - at91sam9m11 (device superset)
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6437-32-bit-ARM926-Embedded-Microprocessor-SAM9M11_Datasheet.pdf
-
-      - at91sam9x5 family (aka "The 5 series")
-        - at91sam9g15
-        - at91sam9g25
-        - at91sam9g35
-        - at91sam9x25
-        - at91sam9x35
-
-          * Datasheet (can be considered as covering the whole family)
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11055-32-bit-ARM926EJ-S-Microcontroller-SAM9X35_Datasheet.pdf
-
-      - at91sam9n12
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001517A.pdf
-
-      - sam9x60
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/SAM9X60-Data-Sheet-DS60001579A.pdf
-
-    * ARM Cortex-A5 based SoCs
-      - sama5d3 family
-
-        - sama5d31
-        - sama5d33
-        - sama5d34
-        - sama5d35
-        - sama5d36 (device superset)
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet_B.pdf
-
-    * ARM Cortex-A5 + NEON based SoCs
-      - sama5d4 family
-
-        - sama5d41
-        - sama5d42
-        - sama5d43
-        - sama5d44 (device superset)
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/60001525A.pdf
-
-      - sama5d2 family
-
-        - sama5d21
-        - sama5d22
-        - sama5d23
-        - sama5d24
-        - sama5d26
-        - sama5d27 (device superset)
-        - sama5d28 (device superset + environmental monitors)
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001476B.pdf
-
-    * ARM Cortex-A7 based SoCs
-      - sama7g5 family
-
-        - sama7g51
-        - sama7g52
-        - sama7g53
-        - sama7g54 (device superset)
-
-          * Datasheet
-
-          Coming soon
-
-      - lan966 family
-        - lan9662
-        - lan9668
-
-          * Datasheet
-
-          Coming soon
-
-    * ARM Cortex-M7 MCUs
-      - sams70 family
-
-        - sams70j19
-        - sams70j20
-        - sams70j21
-        - sams70n19
-        - sams70n20
-        - sams70n21
-        - sams70q19
-        - sams70q20
-        - sams70q21
-
-      - samv70 family
-
-        - samv70j19
-        - samv70j20
-        - samv70n19
-        - samv70n20
-        - samv70q19
-        - samv70q20
-
-      - samv71 family
-
-        - samv71j19
-        - samv71j20
-        - samv71j21
-        - samv71n19
-        - samv71n20
-        - samv71n21
-        - samv71q19
-        - samv71q20
-        - samv71q21
-
-          * Datasheet
-
-          http://ww1.microchip.com/downloads/en/DeviceDoc/SAM-E70-S70-V70-V71-Family-Data-Sheet-DS60001527D.pdf
-
-
-Linux kernel information
-------------------------
-Linux kernel mach directory: arch/arm/mach-at91
-MAINTAINERS entry is: "ARM/Microchip (AT91) SoC support"
-
-
-Device Tree for AT91 SoCs and boards
-------------------------------------
-All AT91 SoCs are converted to Device Tree. Since Linux 3.19, these products
-must use this method to boot the Linux kernel.
-
-Work In Progress statement:
-Device Tree files and Device Tree bindings that apply to AT91 SoCs and boards are
-considered as "Unstable". To be completely clear, any at91 binding can change at
-any time. So, be sure to use a Device Tree Binary and a Kernel Image generated from
-the same source tree.
-Please refer to the Documentation/devicetree/bindings/ABI.rst file for a
-definition of a "Stable" binding/ABI.
-This statement will be removed by AT91 MAINTAINERS when appropriate.
-
-Naming conventions and best practice:
-
-- SoCs Device Tree Source Include files are named after the official name of
-  the product (at91sam9g20.dtsi or sama5d33.dtsi for instance).
-- Device Tree Source Include files (.dtsi) are used to collect common nodes that can be
-  shared across SoCs or boards (sama5d3.dtsi or at91sam9x5cm.dtsi for instance).
-  When collecting nodes for a particular peripheral or topic, the identifier have to
-  be placed at the end of the file name, separated with a "_" (at91sam9x5_can.dtsi
-  or sama5d3_gmac.dtsi for example).
-- board Device Tree Source files (.dts) are prefixed by the string "at91-" so
-  that they can be identified easily. Note that some files are historical exceptions
-  to this rule (sama5d3[13456]ek.dts, usb_a9g20.dts or animeo_ip.dts for example).
diff --git a/Documentation/arm/netwinder.rst b/Documentation/arm/netwinder.rst
deleted file mode 100644
index 8eab66caa2acd..0000000000000
--- a/Documentation/arm/netwinder.rst
+++ /dev/null
@@ -1,85 +0,0 @@
-================================
-NetWinder specific documentation
-================================
-
-The NetWinder is a small low-power computer, primarily designed
-to run Linux.  It is based around the StrongARM RISC processor,
-DC21285 PCI bridge, with PC-type hardware glued around it.
-
-Port usage
-==========
-
-=======  ====== ===============================
-Min      Max	Description
-=======  ====== ===============================
-0x0000   0x000f	DMA1
-0x0020   0x0021	PIC1
-0x0060   0x006f	Keyboard
-0x0070   0x007f	RTC
-0x0080   0x0087	DMA1
-0x0088   0x008f	DMA2
-0x00a0   0x00a3	PIC2
-0x00c0   0x00df	DMA2
-0x0180   0x0187	IRDA
-0x01f0   0x01f6	ide0
-0x0201		Game port
-0x0203		RWA010 configuration read
-0x0220   ?	SoundBlaster
-0x0250   ?	WaveArtist
-0x0279		RWA010 configuration index
-0x02f8   0x02ff	Serial ttyS1
-0x0300   0x031f	Ether10
-0x0338		GPIO1
-0x033a		GPIO2
-0x0370   0x0371	W83977F configuration registers
-0x0388   ?	AdLib
-0x03c0   0x03df	VGA
-0x03f6		ide0
-0x03f8   0x03ff	Serial ttyS0
-0x0400   0x0408	DC21143
-0x0480   0x0487	DMA1
-0x0488   0x048f	DMA2
-0x0a79		RWA010 configuration write
-0xe800   0xe80f	ide0/ide1 BM DMA
-=======  ====== ===============================
-
-
-Interrupt usage
-===============
-
-======= ======= ========================
-IRQ	type	Description
-======= ======= ========================
- 0	ISA	100Hz timer
- 1	ISA	Keyboard
- 2	ISA	cascade
- 3	ISA	Serial ttyS1
- 4	ISA	Serial ttyS0
- 5	ISA	PS/2 mouse
- 6	ISA	IRDA
- 7	ISA	Printer
- 8	ISA	RTC alarm
- 9	ISA
-10	ISA	GP10 (Orange reset button)
-11	ISA
-12	ISA	WaveArtist
-13	ISA
-14	ISA	hda1
-15	ISA
-======= ======= ========================
-
-DMA usage
-=========
-
-======= ======= ===========
-DMA	type	Description
-======= ======= ===========
- 0	ISA	IRDA
- 1	ISA
- 2	ISA	cascade
- 3	ISA	WaveArtist
- 4	ISA
- 5	ISA
- 6	ISA
- 7	ISA	WaveArtist
-======= ======= ===========
diff --git a/Documentation/arm/nwfpe/index.rst b/Documentation/arm/nwfpe/index.rst
deleted file mode 100644
index 3c4d2f9aa10ee..0000000000000
--- a/Documentation/arm/nwfpe/index.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-===================================
-NetWinder's floating point emulator
-===================================
-
-.. toctree::
-   :maxdepth: 1
-
-   nwfpe
-   netwinder-fpe
-   notes
-   todo
diff --git a/Documentation/arm/nwfpe/netwinder-fpe.rst b/Documentation/arm/nwfpe/netwinder-fpe.rst
deleted file mode 100644
index cbb320960fc44..0000000000000
--- a/Documentation/arm/nwfpe/netwinder-fpe.rst
+++ /dev/null
@@ -1,162 +0,0 @@
-=============
-Current State
-=============
-
-The following describes the current state of the NetWinder's floating point
-emulator.
-
-In the following nomenclature is used to describe the floating point
-instructions.  It follows the conventions in the ARM manual.
-
-::
-
-  <S|D|E> = <single|double|extended>, no default
-  {P|M|Z} = {round to +infinity,round to -infinity,round to zero},
-            default = round to nearest
-
-Note: items enclosed in {} are optional.
-
-Floating Point Coprocessor Data Transfer Instructions (CPDT)
-------------------------------------------------------------
-
-LDF/STF - load and store floating
-
-<LDF|STF>{cond}<S|D|E> Fd, Rn
-<LDF|STF>{cond}<S|D|E> Fd, [Rn, #<expression>]{!}
-<LDF|STF>{cond}<S|D|E> Fd, [Rn], #<expression>
-
-These instructions are fully implemented.
-
-LFM/SFM - load and store multiple floating
-
-Form 1 syntax:
-<LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn]
-<LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn, #<expression>]{!}
-<LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn], #<expression>
-
-Form 2 syntax:
-<LFM|SFM>{cond}<FD,EA> Fd, <count>, [Rn]{!}
-
-These instructions are fully implemented.  They store/load three words
-for each floating point register into the memory location given in the
-instruction.  The format in memory is unlikely to be compatible with
-other implementations, in particular the actual hardware.  Specific
-mention of this is made in the ARM manuals.
-
-Floating Point Coprocessor Register Transfer Instructions (CPRT)
-----------------------------------------------------------------
-
-Conversions, read/write status/control register instructions
-
-FLT{cond}<S,D,E>{P,M,Z} Fn, Rd          Convert integer to floating point
-FIX{cond}{P,M,Z} Rd, Fn                 Convert floating point to integer
-WFS{cond} Rd                            Write floating point status register
-RFS{cond} Rd                            Read floating point status register
-WFC{cond} Rd                            Write floating point control register
-RFC{cond} Rd                            Read floating point control register
-
-FLT/FIX are fully implemented.
-
-RFS/WFS are fully implemented.
-
-RFC/WFC are fully implemented.  RFC/WFC are supervisor only instructions, and
-presently check the CPU mode, and do an invalid instruction trap if not called
-from supervisor mode.
-
-Compare instructions
-
-CMF{cond} Fn, Fm        Compare floating
-CMFE{cond} Fn, Fm       Compare floating with exception
-CNF{cond} Fn, Fm        Compare negated floating
-CNFE{cond} Fn, Fm       Compare negated floating with exception
-
-These are fully implemented.
-
-Floating Point Coprocessor Data Instructions (CPDT)
----------------------------------------------------
-
-Dyadic operations:
-
-ADF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - add
-SUF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - subtract
-RSF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse subtract
-MUF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - multiply
-DVF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - divide
-RDV{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse divide
-
-These are fully implemented.
-
-FML{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast multiply
-FDV{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast divide
-FRD{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast reverse divide
-
-These are fully implemented as well.  They use the same algorithm as the
-non-fast versions.  Hence, in this implementation their performance is
-equivalent to the MUF/DVF/RDV instructions.  This is acceptable according
-to the ARM manual.  The manual notes these are defined only for single
-operands, on the actual FPA11 hardware they do not work for double or
-extended precision operands.  The emulator currently does not check
-the requested permissions conditions, and performs the requested operation.
-
-RMF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - IEEE remainder
-
-This is fully implemented.
-
-Monadic operations:
-
-MVF{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - move
-MNF{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - move negated
-
-These are fully implemented.
-
-ABS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - absolute value
-SQT{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - square root
-RND{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - round
-
-These are fully implemented.
-
-URD{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - unnormalized round
-NRM{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - normalize
-
-These are implemented.  URD is implemented using the same code as the RND
-instruction.  Since URD cannot return a unnormalized number, NRM becomes
-a NOP.
-
-Library calls:
-
-POW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - power
-RPW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse power
-POL{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - polar angle (arctan2)
-
-LOG{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base 10
-LGN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base e
-EXP{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - exponent
-SIN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - sine
-COS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - cosine
-TAN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - tangent
-ASN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arcsine
-ACS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arccosine
-ATN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arctangent
-
-These are not implemented.  They are not currently issued by the compiler,
-and are handled by routines in libc.  These are not implemented by the FPA11
-hardware, but are handled by the floating point support code.  They should
-be implemented in future versions.
-
-Signalling:
-
-Signals are implemented.  However current ELF kernels produced by Rebel.com
-have a bug in them that prevents the module from generating a SIGFPE.  This
-is caused by a failure to alias fp_current to the kernel variable
-current_set[0] correctly.
-
-The kernel provided with this distribution (vmlinux-nwfpe-0.93) contains
-a fix for this problem and also incorporates the current version of the
-emulator directly.  It is possible to run with no floating point module
-loaded with this kernel.  It is provided as a demonstration of the
-technology and for those who want to do floating point work that depends
-on signals.  It is not strictly necessary to use the module.
-
-A module (either the one provided by Russell King, or the one in this
-distribution) can be loaded to replace the functionality of the emulator
-built into the kernel.
diff --git a/Documentation/arm/nwfpe/notes.rst b/Documentation/arm/nwfpe/notes.rst
deleted file mode 100644
index 102e55af8439a..0000000000000
--- a/Documentation/arm/nwfpe/notes.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-Notes
-=====
-
-There seems to be a problem with exp(double) and our emulator.  I haven't
-been able to track it down yet.  This does not occur with the emulator
-supplied by Russell King.
-
-I also found one oddity in the emulator.  I don't think it is serious but
-will point it out.  The ARM calling conventions require floating point
-registers f4-f7 to be preserved over a function call.  The compiler quite
-often uses an stfe instruction to save f4 on the stack upon entry to a
-function, and an ldfe instruction to restore it before returning.
-
-I was looking at some code, that calculated a double result, stored it in f4
-then made a function call. Upon return from the function call the number in
-f4 had been converted to an extended value in the emulator.
-
-This is a side effect of the stfe instruction.  The double in f4 had to be
-converted to extended, then stored.  If an lfm/sfm combination had been used,
-then no conversion would occur.  This has performance considerations.  The
-result from the function call and f4 were used in a multiplication.  If the
-emulator sees a multiply of a double and extended, it promotes the double to
-extended, then does the multiply in extended precision.
-
-This code will cause this problem:
-
-double x, y, z;
-z = log(x)/log(y);
-
-The result of log(x) (a double) will be calculated, returned in f0, then
-moved to f4 to preserve it over the log(y) call.  The division will be done
-in extended precision, due to the stfe instruction used to save f4 in log(y).
diff --git a/Documentation/arm/nwfpe/nwfpe.rst b/Documentation/arm/nwfpe/nwfpe.rst
deleted file mode 100644
index 35cd90dacbfff..0000000000000
--- a/Documentation/arm/nwfpe/nwfpe.rst
+++ /dev/null
@@ -1,74 +0,0 @@
-Introduction
-============
-
-This directory contains the version 0.92 test release of the NetWinder
-Floating Point Emulator.
-
-The majority of the code was written by me, Scott Bambrough It is
-written in C, with a small number of routines in inline assembler
-where required.  It was written quickly, with a goal of implementing a
-working version of all the floating point instructions the compiler
-emits as the first target.  I have attempted to be as optimal as
-possible, but there remains much room for improvement.
-
-I have attempted to make the emulator as portable as possible.  One of
-the problems is with leading underscores on kernel symbols.  Elf
-kernels have no leading underscores, a.out compiled kernels do.  I
-have attempted to use the C_SYMBOL_NAME macro wherever this may be
-important.
-
-Another choice I made was in the file structure.  I have attempted to
-contain all operating system specific code in one module (fpmodule.*).
-All the other files contain emulator specific code.  This should allow
-others to port the emulator to NetBSD for instance relatively easily.
-
-The floating point operations are based on SoftFloat Release 2, by
-John Hauser.  SoftFloat is a software implementation of floating-point
-that conforms to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic.  As many as four formats are supported: single precision,
-double precision, extended double precision, and quadruple precision.
-All operations required by the standard are implemented, except for
-conversions to and from decimal.  We use only the single precision,
-double precision and extended double precision formats.  The port of
-SoftFloat to the ARM was done by Phil Blundell, based on an earlier
-port of SoftFloat version 1 by Neil Carson for NetBSD/arm32.
-
-The file README.FPE contains a description of what has been implemented
-so far in the emulator.  The file TODO contains a information on what
-remains to be done, and other ideas for the emulator.
-
-Bug reports, comments, suggestions should be directed to me at
-<scottb@netwinder.org>.  General reports of "this program doesn't
-work correctly when your emulator is installed" are useful for
-determining that bugs still exist; but are virtually useless when
-attempting to isolate the problem.  Please report them, but don't
-expect quick action.  Bugs still exist.  The problem remains in isolating
-which instruction contains the bug.  Small programs illustrating a specific
-problem are a godsend.
-
-Legal Notices
--------------
-
-The NetWinder Floating Point Emulator is free software.  Everything Rebel.com
-has written is provided under the GNU GPL.  See the file COPYING for copying
-conditions.  Excluded from the above is the SoftFloat code.  John Hauser's
-legal notice for SoftFloat is included below.
-
--------------------------------------------------------------------------------
-
-SoftFloat Legal Notice
-
-SoftFloat was written by John R. Hauser.  This work was made possible in
-part by the International Computer Science Institute, located at Suite 600,
-1947 Center Street, Berkeley, California 94704.  Funding was partially
-provided by the National Science Foundation under grant MIP-9311980.  The
-original version of this code was written as part of a project to build
-a fixed-point vector processor in collaboration with the University of
-California at Berkeley, overseen by Profs. Nelson Morgan and John Wawrzynek.
-
-THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
-has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
-TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
-PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
-AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
--------------------------------------------------------------------------------
diff --git a/Documentation/arm/nwfpe/todo.rst b/Documentation/arm/nwfpe/todo.rst
deleted file mode 100644
index 393f11b145408..0000000000000
--- a/Documentation/arm/nwfpe/todo.rst
+++ /dev/null
@@ -1,72 +0,0 @@
-TODO LIST
-=========
-
-::
-
-  POW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - power
-  RPW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse power
-  POL{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - polar angle (arctan2)
-
-  LOG{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base 10
-  LGN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base e
-  EXP{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - exponent
-  SIN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - sine
-  COS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - cosine
-  TAN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - tangent
-  ASN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arcsine
-  ACS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arccosine
-  ATN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arctangent
-
-These are not implemented.  They are not currently issued by the compiler,
-and are handled by routines in libc.  These are not implemented by the FPA11
-hardware, but are handled by the floating point support code.  They should
-be implemented in future versions.
-
-There are a couple of ways to approach the implementation of these.  One
-method would be to use accurate table methods for these routines.  I have
-a couple of papers by S. Gal from IBM's research labs in Haifa, Israel that
-seem to promise extreme accuracy (in the order of 99.8%) and reasonable speed.
-These methods are used in GLIBC for some of the transcendental functions.
-
-Another approach, which I know little about is CORDIC.  This stands for
-Coordinate Rotation Digital Computer, and is a method of computing
-transcendental functions using mostly shifts and adds and a few
-multiplications and divisions.  The ARM excels at shifts and adds,
-so such a method could be promising, but requires more research to
-determine if it is feasible.
-
-Rounding Methods
-----------------
-
-The IEEE standard defines 4 rounding modes.  Round to nearest is the
-default, but rounding to + or - infinity or round to zero are also allowed.
-Many architectures allow the rounding mode to be specified by modifying bits
-in a control register.  Not so with the ARM FPA11 architecture.  To change
-the rounding mode one must specify it with each instruction.
-
-This has made porting some benchmarks difficult.  It is possible to
-introduce such a capability into the emulator.  The FPCR contains
-bits describing the rounding mode.  The emulator could be altered to
-examine a flag, which if set forced it to ignore the rounding mode in
-the instruction, and use the mode specified in the bits in the FPCR.
-
-This would require a method of getting/setting the flag, and the bits
-in the FPCR.  This requires a kernel call in ArmLinux, as WFC/RFC are
-supervisor only instructions.  If anyone has any ideas or comments I
-would like to hear them.
-
-NOTE:
- pulled out from some docs on ARM floating point, specifically
- for the Acorn FPE, but not limited to it:
-
- The floating point control register (FPCR) may only be present in some
- implementations: it is there to control the hardware in an implementation-
- specific manner, for example to disable the floating point system.  The user
- mode of the ARM is not permitted to use this register (since the right is
- reserved to alter it between implementations) and the WFC and RFC
- instructions will trap if tried in user mode.
-
- Hence, the answer is yes, you could do this, but then you will run a high
- risk of becoming isolated if and when hardware FP emulation comes out
-
-		-- Russell.
diff --git a/Documentation/arm/omap/dss.rst b/Documentation/arm/omap/dss.rst
deleted file mode 100644
index a40c4d9c717a7..0000000000000
--- a/Documentation/arm/omap/dss.rst
+++ /dev/null
@@ -1,372 +0,0 @@
-=========================
-OMAP2/3 Display Subsystem
-=========================
-
-This is an almost total rewrite of the OMAP FB driver in drivers/video/omap
-(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI,
-TV-out and multiple display support, but there are lots of small improvements
-also.
-
-The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB,
-panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live
-currently side by side, you can choose which one to use.
-
-Features
---------
-
-Working and tested features include:
-
-- MIPI DPI (parallel) output
-- MIPI DSI output in command mode
-- MIPI DBI (RFBI) output
-- SDI output
-- TV output
-- All pieces can be compiled as a module or inside kernel
-- Use DISPC to update any of the outputs
-- Use CPU to update RFBI or DSI output
-- OMAP DISPC planes
-- RGB16, RGB24 packed, RGB24 unpacked
-- YUV2, UYVY
-- Scaling
-- Adjusting DSS FCK to find a good pixel clock
-- Use DSI DPLL to create DSS FCK
-
-Tested boards include:
-- OMAP3 SDP board
-- Beagle board
-- N810
-
-omapdss driver
---------------
-
-The DSS driver does not itself have any support for Linux framebuffer, V4L or
-such like the current ones, but it has an internal kernel API that upper level
-drivers can use.
-
-The DSS driver models OMAP's overlays, overlay managers and displays in a
-flexible way to enable non-common multi-display configuration. In addition to
-modelling the hardware overlays, omapdss supports virtual overlays and overlay
-managers. These can be used when updating a display with CPU or system DMA.
-
-omapdss driver support for audio
---------------------------------
-There exist several display technologies and standards that support audio as
-well. Hence, it is relevant to update the DSS device driver to provide an audio
-interface that may be used by an audio driver or any other driver interested in
-the functionality.
-
-The audio_enable function is intended to prepare the relevant
-IP for playback (e.g., enabling an audio FIFO, taking in/out of reset
-some IP, enabling companion chips, etc). It is intended to be called before
-audio_start. The audio_disable function performs the reverse operation and is
-intended to be called after audio_stop.
-
-While a given DSS device driver may support audio, it is possible that for
-certain configurations audio is not supported (e.g., an HDMI display using a
-VESA video timing). The audio_supported function is intended to query whether
-the current configuration of the display supports audio.
-
-The audio_config function is intended to configure all the relevant audio
-parameters of the display. In order to make the function independent of any
-specific DSS device driver, a struct omap_dss_audio is defined. Its purpose
-is to contain all the required parameters for audio configuration. At the
-moment, such structure contains pointers to IEC-60958 channel status word
-and CEA-861 audio infoframe structures. This should be enough to support
-HDMI and DisplayPort, as both are based on CEA-861 and IEC-60958.
-
-The audio_enable/disable, audio_config and audio_supported functions could be
-implemented as functions that may sleep. Hence, they should not be called
-while holding a spinlock or a readlock.
-
-The audio_start/audio_stop function is intended to effectively start/stop audio
-playback after the configuration has taken place. These functions are designed
-to be used in an atomic context. Hence, audio_start should return quickly and be
-called only after all the needed resources for audio playback (audio FIFOs,
-DMA channels, companion chips, etc) have been enabled to begin data transfers.
-audio_stop is designed to only stop the audio transfers. The resources used
-for playback are released using audio_disable.
-
-The enum omap_dss_audio_state may be used to help the implementations of
-the interface to keep track of the audio state. The initial state is _DISABLED;
-then, the state transitions to _CONFIGURED, and then, when it is ready to
-play audio, to _ENABLED. The state _PLAYING is used when the audio is being
-rendered.
-
-
-Panel and controller drivers
-----------------------------
-
-The drivers implement panel or controller specific functionality and are not
-usually visible to users except through omapfb driver.  They register
-themselves to the DSS driver.
-
-omapfb driver
--------------
-
-The omapfb driver implements arbitrary number of standard linux framebuffers.
-These framebuffers can be routed flexibly to any overlays, thus allowing very
-dynamic display architecture.
-
-The driver exports some omapfb specific ioctls, which are compatible with the
-ioctls in the old driver.
-
-The rest of the non standard features are exported via sysfs. Whether the final
-implementation will use sysfs, or ioctls, is still open.
-
-V4L2 drivers
-------------
-
-V4L2 is being implemented in TI.
-
-From omapdss point of view the V4L2 drivers should be similar to framebuffer
-driver.
-
-Architecture
---------------------
-
-Some clarification what the different components do:
-
-    - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the
-      pixel data for the image. Framebuffer has width and height and color
-      depth.
-    - Overlay defines where the pixels are read from and where they go on the
-      screen. The overlay may be smaller than framebuffer, thus displaying only
-      part of the framebuffer. The position of the overlay may be changed if
-      the overlay is smaller than the display.
-    - Overlay manager combines the overlays in to one image and feeds them to
-      display.
-    - Display is the actual physical display device.
-
-A framebuffer can be connected to multiple overlays to show the same pixel data
-on all of the overlays. Note that in this case the overlay input sizes must be
-the same, but, in case of video overlays, the output size can be different. Any
-framebuffer can be connected to any overlay.
-
-An overlay can be connected to one overlay manager. Also DISPC overlays can be
-connected only to DISPC overlay managers, and virtual overlays can be only
-connected to virtual overlays.
-
-An overlay manager can be connected to one display. There are certain
-restrictions which kinds of displays an overlay manager can be connected:
-
-    - DISPC TV overlay manager can be only connected to TV display.
-    - Virtual overlay managers can only be connected to DBI or DSI displays.
-    - DISPC LCD overlay manager can be connected to all displays, except TV
-      display.
-
-Sysfs
------
-The sysfs interface is mainly used for testing. I don't think sysfs
-interface is the best for this in the final version, but I don't quite know
-what would be the best interfaces for these things.
-
-The sysfs interface is divided to two parts: DSS and FB.
-
-/sys/class/graphics/fb? directory:
-mirror		0=off, 1=on
-rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
-rotate_type	0 = DMA rotation, 1 = VRFB rotation
-overlays	List of overlay numbers to which framebuffer pixels go
-phys_addr	Physical address of the framebuffer
-virt_addr	Virtual address of the framebuffer
-size		Size of the framebuffer
-
-/sys/devices/platform/omapdss/overlay? directory:
-enabled		0=off, 1=on
-input_size	width,height (ie. the framebuffer size)
-manager		Destination overlay manager name
-name
-output_size	width,height
-position	x,y
-screen_width	width
-global_alpha   	global alpha 0-255 0=transparent 255=opaque
-
-/sys/devices/platform/omapdss/manager? directory:
-display				Destination display
-name
-alpha_blending_enabled		0=off, 1=on
-trans_key_enabled		0=off, 1=on
-trans_key_type			gfx-destination, video-source
-trans_key_value			transparency color key (RGB24)
-default_color			default background color (RGB24)
-
-/sys/devices/platform/omapdss/display? directory:
-
-=============== =============================================================
-ctrl_name	Controller name
-mirror		0=off, 1=on
-update_mode	0=off, 1=auto, 2=manual
-enabled		0=off, 1=on
-name
-rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
-timings		Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw)
-		When writing, two special timings are accepted for tv-out:
-		"pal" and "ntsc"
-panel_name
-tear_elim	Tearing elimination 0=off, 1=on
-output_type	Output type (video encoder only): "composite" or "svideo"
-=============== =============================================================
-
-There are also some debugfs files at <debugfs>/omapdss/ which show information
-about clocks and registers.
-
-Examples
---------
-
-The following definitions have been made for the examples below::
-
-	ovl0=/sys/devices/platform/omapdss/overlay0
-	ovl1=/sys/devices/platform/omapdss/overlay1
-	ovl2=/sys/devices/platform/omapdss/overlay2
-
-	mgr0=/sys/devices/platform/omapdss/manager0
-	mgr1=/sys/devices/platform/omapdss/manager1
-
-	lcd=/sys/devices/platform/omapdss/display0
-	dvi=/sys/devices/platform/omapdss/display1
-	tv=/sys/devices/platform/omapdss/display2
-
-	fb0=/sys/class/graphics/fb0
-	fb1=/sys/class/graphics/fb1
-	fb2=/sys/class/graphics/fb2
-
-Default setup on OMAP3 SDP
---------------------------
-
-Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI
-and TV-out are not in use. The columns from left to right are:
-framebuffers, overlays, overlay managers, displays. Framebuffers are
-handled by omapfb, and the rest by the DSS::
-
-	FB0 --- GFX  -\            DVI
-	FB1 --- VID1 --+- LCD ---- LCD
-	FB2 --- VID2 -/   TV ----- TV
-
-Example: Switch from LCD to DVI
--------------------------------
-
-::
-
-	w=`cat $dvi/timings | cut -d "," -f 2 | cut -d "/" -f 1`
-	h=`cat $dvi/timings | cut -d "," -f 3 | cut -d "/" -f 1`
-
-	echo "0" > $lcd/enabled
-	echo "" > $mgr0/display
-	fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h
-	# at this point you have to switch the dvi/lcd dip-switch from the omap board
-	echo "dvi" > $mgr0/display
-	echo "1" > $dvi/enabled
-
-After this the configuration looks like:::
-
-	FB0 --- GFX  -\         -- DVI
-	FB1 --- VID1 --+- LCD -/   LCD
-	FB2 --- VID2 -/   TV ----- TV
-
-Example: Clone GFX overlay to LCD and TV
-----------------------------------------
-
-::
-
-	w=`cat $tv/timings | cut -d "," -f 2 | cut -d "/" -f 1`
-	h=`cat $tv/timings | cut -d "," -f 3 | cut -d "/" -f 1`
-
-	echo "0" > $ovl0/enabled
-	echo "0" > $ovl1/enabled
-
-	echo "" > $fb1/overlays
-	echo "0,1" > $fb0/overlays
-
-	echo "$w,$h" > $ovl1/output_size
-	echo "tv" > $ovl1/manager
-
-	echo "1" > $ovl0/enabled
-	echo "1" > $ovl1/enabled
-
-	echo "1" > $tv/enabled
-
-After this the configuration looks like (only relevant parts shown)::
-
-	FB0 +-- GFX  ---- LCD ---- LCD
-	\- VID1 ---- TV  ---- TV
-
-Misc notes
-----------
-
-OMAP FB allocates the framebuffer memory using the standard dma allocator. You
-can enable Contiguous Memory Allocator (CONFIG_CMA) to improve the dma
-allocator, and if CMA is enabled, you use "cma=" kernel parameter to increase
-the global memory area for CMA.
-
-Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
-of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI.
-
-Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB
-does not support mirroring.
-
-VRFB rotation requires much more memory than non-rotated framebuffer, so you
-probably need to increase your vram setting before using VRFB rotation. Also,
-many applications may not work with VRFB if they do not pay attention to all
-framebuffer parameters.
-
-Kernel boot arguments
----------------------
-
-omapfb.mode=<display>:<mode>[,...]
-	- Default video mode for specified displays. For example,
-	  "dvi:800x400MR-24@60".  See drivers/video/modedb.c.
-	  There are also two special modes: "pal" and "ntsc" that
-	  can be used to tv out.
-
-omapfb.vram=<fbnum>:<size>[@<physaddr>][,...]
-	- VRAM allocated for a framebuffer. Normally omapfb allocates vram
-	  depending on the display size. With this you can manually allocate
-	  more or define the physical address of each framebuffer. For example,
-	  "1:4M" to allocate 4M for fb1.
-
-omapfb.debug=<y|n>
-	- Enable debug printing. You have to have OMAPFB debug support enabled
-	  in kernel config.
-
-omapfb.test=<y|n>
-	- Draw test pattern to framebuffer whenever framebuffer settings change.
-	  You need to have OMAPFB debug support enabled in kernel config.
-
-omapfb.vrfb=<y|n>
-	- Use VRFB rotation for all framebuffers.
-
-omapfb.rotate=<angle>
-	- Default rotation applied to all framebuffers.
-	  0 - 0 degree rotation
-	  1 - 90 degree rotation
-	  2 - 180 degree rotation
-	  3 - 270 degree rotation
-
-omapfb.mirror=<y|n>
-	- Default mirror for all framebuffers. Only works with DMA rotation.
-
-omapdss.def_disp=<display>
-	- Name of default display, to which all overlays will be connected.
-	  Common examples are "lcd" or "tv".
-
-omapdss.debug=<y|n>
-	- Enable debug printing. You have to have DSS debug support enabled in
-	  kernel config.
-
-TODO
-----
-
-DSS locking
-
-Error checking
-
-- Lots of checks are missing or implemented just as BUG()
-
-System DMA update for DSI
-
-- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how
-  to skip the empty byte?)
-
-OMAP1 support
-
-- Not sure if needed
diff --git a/Documentation/arm/omap/index.rst b/Documentation/arm/omap/index.rst
deleted file mode 100644
index 8b365b212e492..0000000000000
--- a/Documentation/arm/omap/index.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=======
-TI OMAP
-=======
-
-.. toctree::
-   :maxdepth: 1
-
-   omap
-   omap_pm
-   dss
diff --git a/Documentation/arm/omap/omap.rst b/Documentation/arm/omap/omap.rst
deleted file mode 100644
index f440c0f4613fc..0000000000000
--- a/Documentation/arm/omap/omap.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-============
-OMAP history
-============
-
-This file contains documentation for running mainline
-kernel on omaps.
-
-======		======================================================
-KERNEL		NEW DEPENDENCIES
-======		======================================================
-v4.3+		Update is needed for custom .config files to make sure
-		CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work
-		properly.
-
-v4.18+		Update is needed for custom .config files to make sure
-		CONFIG_MMC_SDHCI_OMAP is enabled for all MMC instances
-		to work in DRA7 and K2G based boards.
-======		======================================================
diff --git a/Documentation/arm/omap/omap_pm.rst b/Documentation/arm/omap/omap_pm.rst
deleted file mode 100644
index a335e4c8ce2cc..0000000000000
--- a/Documentation/arm/omap/omap_pm.rst
+++ /dev/null
@@ -1,165 +0,0 @@
-=====================
-The OMAP PM interface
-=====================
-
-This document describes the temporary OMAP PM interface.  Driver
-authors use these functions to communicate minimum latency or
-throughput constraints to the kernel power management code.
-Over time, the intention is to merge features from the OMAP PM
-interface into the Linux PM QoS code.
-
-Drivers need to express PM parameters which:
-
-- support the range of power management parameters present in the TI SRF;
-
-- separate the drivers from the underlying PM parameter
-  implementation, whether it is the TI SRF or Linux PM QoS or Linux
-  latency framework or something else;
-
-- specify PM parameters in terms of fundamental units, such as
-  latency and throughput, rather than units which are specific to OMAP
-  or to particular OMAP variants;
-
-- allow drivers which are shared with other architectures (e.g.,
-  DaVinci) to add these constraints in a way which won't affect non-OMAP
-  systems,
-
-- can be implemented immediately with minimal disruption of other
-  architectures.
-
-
-This document proposes the OMAP PM interface, including the following
-five power management functions for driver code:
-
-1. Set the maximum MPU wakeup latency::
-
-   (*pdata->set_max_mpu_wakeup_lat)(struct device *dev, unsigned long t)
-
-2. Set the maximum device wakeup latency::
-
-   (*pdata->set_max_dev_wakeup_lat)(struct device *dev, unsigned long t)
-
-3. Set the maximum system DMA transfer start latency (CORE pwrdm)::
-
-   (*pdata->set_max_sdma_lat)(struct device *dev, long t)
-
-4. Set the minimum bus throughput needed by a device::
-
-   (*pdata->set_min_bus_tput)(struct device *dev, u8 agent_id, unsigned long r)
-
-5. Return the number of times the device has lost context::
-
-   (*pdata->get_dev_context_loss_count)(struct device *dev)
-
-
-Further documentation for all OMAP PM interface functions can be
-found in arch/arm/plat-omap/include/mach/omap-pm.h.
-
-
-The OMAP PM layer is intended to be temporary
----------------------------------------------
-
-The intention is that eventually the Linux PM QoS layer should support
-the range of power management features present in OMAP3.  As this
-happens, existing drivers using the OMAP PM interface can be modified
-to use the Linux PM QoS code; and the OMAP PM interface can disappear.
-
-
-Driver usage of the OMAP PM functions
--------------------------------------
-
-As the 'pdata' in the above examples indicates, these functions are
-exposed to drivers through function pointers in driver .platform_data
-structures.  The function pointers are initialized by the `board-*.c`
-files to point to the corresponding OMAP PM functions:
-
-- set_max_dev_wakeup_lat will point to
-  omap_pm_set_max_dev_wakeup_lat(), etc.  Other architectures which do
-  not support these functions should leave these function pointers set
-  to NULL.  Drivers should use the following idiom::
-
-        if (pdata->set_max_dev_wakeup_lat)
-            (*pdata->set_max_dev_wakeup_lat)(dev, t);
-
-The most common usage of these functions will probably be to specify
-the maximum time from when an interrupt occurs, to when the device
-becomes accessible.  To accomplish this, driver writers should use the
-set_max_mpu_wakeup_lat() function to constrain the MPU wakeup
-latency, and the set_max_dev_wakeup_lat() function to constrain the
-device wakeup latency (from clk_enable() to accessibility).  For
-example::
-
-        /* Limit MPU wakeup latency */
-        if (pdata->set_max_mpu_wakeup_lat)
-            (*pdata->set_max_mpu_wakeup_lat)(dev, tc);
-
-        /* Limit device powerdomain wakeup latency */
-        if (pdata->set_max_dev_wakeup_lat)
-            (*pdata->set_max_dev_wakeup_lat)(dev, td);
-
-        /* total wakeup latency in this example: (tc + td) */
-
-The PM parameters can be overwritten by calling the function again
-with the new value.  The settings can be removed by calling the
-function with a t argument of -1 (except in the case of
-set_max_bus_tput(), which should be called with an r argument of 0).
-
-The fifth function above, omap_pm_get_dev_context_loss_count(),
-is intended as an optimization to allow drivers to determine whether the
-device has lost its internal context.  If context has been lost, the
-driver must restore its internal context before proceeding.
-
-
-Other specialized interface functions
--------------------------------------
-
-The five functions listed above are intended to be usable by any
-device driver.  DSPBridge and CPUFreq have a few special requirements.
-DSPBridge expresses target DSP performance levels in terms of OPP IDs.
-CPUFreq expresses target MPU performance levels in terms of MPU
-frequency.  The OMAP PM interface contains functions for these
-specialized cases to convert that input information (OPPs/MPU
-frequency) into the form that the underlying power management
-implementation needs:
-
-6. `(*pdata->dsp_get_opp_table)(void)`
-
-7. `(*pdata->dsp_set_min_opp)(u8 opp_id)`
-
-8. `(*pdata->dsp_get_opp)(void)`
-
-9. `(*pdata->cpu_get_freq_table)(void)`
-
-10. `(*pdata->cpu_set_freq)(unsigned long f)`
-
-11. `(*pdata->cpu_get_freq)(void)`
-
-Customizing OPP for platform
-============================
-Defining CONFIG_PM should enable OPP layer for the silicon
-and the registration of OPP table should take place automatically.
-However, in special cases, the default OPP table may need to be
-tweaked, for e.g.:
-
- * enable default OPPs which are disabled by default, but which
-   could be enabled on a platform
- * Disable an unsupported OPP on the platform
- * Define and add a custom opp table entry
-   in these cases, the board file needs to do additional steps as follows:
-
-arch/arm/mach-omapx/board-xyz.c::
-
-	#include "pm.h"
-	....
-	static void __init omap_xyz_init_irq(void)
-	{
-		....
-		/* Initialize the default table */
-		omapx_opp_init();
-		/* Do customization to the defaults */
-		....
-	}
-
-NOTE:
-  omapx_opp_init will be omap3_opp_init or as required
-  based on the omap family.
diff --git a/Documentation/arm/porting.rst b/Documentation/arm/porting.rst
deleted file mode 100644
index bd21958bdb2d5..0000000000000
--- a/Documentation/arm/porting.rst
+++ /dev/null
@@ -1,137 +0,0 @@
-=======
-Porting
-=======
-
-Taken from list archive at http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2001-July/004064.html
-
-Initial definitions
--------------------
-
-The following symbol definitions rely on you knowing the translation that
-__virt_to_phys() does for your machine.  This macro converts the passed
-virtual address to a physical address.  Normally, it is simply:
-
-		phys = virt - PAGE_OFFSET + PHYS_OFFSET
-
-
-Decompressor Symbols
---------------------
-
-ZTEXTADDR
-	Start address of decompressor.  There's no point in talking about
-	virtual or physical addresses here, since the MMU will be off at
-	the time when you call the decompressor code.  You normally call
-	the kernel at this address to start it booting.  This doesn't have
-	to be located in RAM, it can be in flash or other read-only or
-	read-write addressable medium.
-
-ZBSSADDR
-	Start address of zero-initialised work area for the decompressor.
-	This must be pointing at RAM.  The decompressor will zero initialise
-	this for you.  Again, the MMU will be off.
-
-ZRELADDR
-	This is the address where the decompressed kernel will be written,
-	and eventually executed.  The following constraint must be valid:
-
-		__virt_to_phys(TEXTADDR) == ZRELADDR
-
-	The initial part of the kernel is carefully coded to be position
-	independent.
-
-INITRD_PHYS
-	Physical address to place the initial RAM disk.  Only relevant if
-	you are using the bootpImage stuff (which only works on the old
-	struct param_struct).
-
-INITRD_VIRT
-	Virtual address of the initial RAM disk.  The following  constraint
-	must be valid:
-
-		__virt_to_phys(INITRD_VIRT) == INITRD_PHYS
-
-PARAMS_PHYS
-	Physical address of the struct param_struct or tag list, giving the
-	kernel various parameters about its execution environment.
-
-
-Kernel Symbols
---------------
-
-PHYS_OFFSET
-	Physical start address of the first bank of RAM.
-
-PAGE_OFFSET
-	Virtual start address of the first bank of RAM.  During the kernel
-	boot phase, virtual address PAGE_OFFSET will be mapped to physical
-	address PHYS_OFFSET, along with any other mappings you supply.
-	This should be the same value as TASK_SIZE.
-
-TASK_SIZE
-	The maximum size of a user process in bytes.  Since user space
-	always starts at zero, this is the maximum address that a user
-	process can access+1.  The user space stack grows down from this
-	address.
-
-	Any virtual address below TASK_SIZE is deemed to be user process
-	area, and therefore managed dynamically on a process by process
-	basis by the kernel.  I'll call this the user segment.
-
-	Anything above TASK_SIZE is common to all processes.  I'll call
-	this the kernel segment.
-
-	(In other words, you can't put IO mappings below TASK_SIZE, and
-	hence PAGE_OFFSET).
-
-TEXTADDR
-	Virtual start address of kernel, normally PAGE_OFFSET + 0x8000.
-	This is where the kernel image ends up.  With the latest kernels,
-	it must be located at 32768 bytes into a 128MB region.  Previous
-	kernels placed a restriction of 256MB here.
-
-DATAADDR
-	Virtual address for the kernel data segment.  Must not be defined
-	when using the decompressor.
-
-VMALLOC_START / VMALLOC_END
-	Virtual addresses bounding the vmalloc() area.  There must not be
-	any static mappings in this area; vmalloc will overwrite them.
-	The addresses must also be in the kernel segment (see above).
-	Normally, the vmalloc() area starts VMALLOC_OFFSET bytes above the
-	last virtual RAM address (found using variable high_memory).
-
-VMALLOC_OFFSET
-	Offset normally incorporated into VMALLOC_START to provide a hole
-	between virtual RAM and the vmalloc area.  We do this to allow
-	out of bounds memory accesses (eg, something writing off the end
-	of the mapped memory map) to be caught.  Normally set to 8MB.
-
-Architecture Specific Macros
-----------------------------
-
-BOOT_MEM(pram,pio,vio)
-	`pram` specifies the physical start address of RAM.  Must always
-	be present, and should be the same as PHYS_OFFSET.
-
-	`pio` is the physical address of an 8MB region containing IO for
-	use with the debugging macros in arch/arm/kernel/debug-armv.S.
-
-	`vio` is the virtual address of the 8MB debugging region.
-
-	It is expected that the debugging region will be re-initialised
-	by the architecture specific code later in the code (via the
-	MAPIO function).
-
-BOOT_PARAMS
-	Same as, and see PARAMS_PHYS.
-
-FIXUP(func)
-	Machine specific fixups, run before memory subsystems have been
-	initialised.
-
-MAPIO(func)
-	Machine specific function to map IO areas (including the debug
-	region above).
-
-INITIRQ(func)
-	Machine specific function to initialise interrupts.
diff --git a/Documentation/arm/pxa/mfp.rst b/Documentation/arm/pxa/mfp.rst
deleted file mode 100644
index ac34e5d7ee44c..0000000000000
--- a/Documentation/arm/pxa/mfp.rst
+++ /dev/null
@@ -1,288 +0,0 @@
-==============================================
-MFP Configuration for PXA2xx/PXA3xx Processors
-==============================================
-
-			Eric Miao <eric.miao@marvell.com>
-
-MFP stands for Multi-Function Pin, which is the pin-mux logic on PXA3xx and
-later PXA series processors.  This document describes the existing MFP API,
-and how board/platform driver authors could make use of it.
-
-Basic Concept
-=============
-
-Unlike the GPIO alternate function settings on PXA25x and PXA27x, a new MFP
-mechanism is introduced from PXA3xx to completely move the pin-mux functions
-out of the GPIO controller. In addition to pin-mux configurations, the MFP
-also controls the low power state, driving strength, pull-up/down and event
-detection of each pin.  Below is a diagram of internal connections between
-the MFP logic and the remaining SoC peripherals::
-
- +--------+
- |        |--(GPIO19)--+
- |  GPIO  |            |
- |        |--(GPIO...) |
- +--------+            |
-                       |       +---------+
- +--------+            +------>|         |
- |  PWM2  |--(PWM_OUT)-------->|   MFP   |
- +--------+            +------>|         |-------> to external PAD
-                       | +---->|         |
- +--------+            | | +-->|         |
- |  SSP2  |---(TXD)----+ | |   +---------+
- +--------+              | |
-                         | |
- +--------+              | |
- | Keypad |--(MKOUT4)----+ |
- +--------+                |
-                           |
- +--------+                |
- |  UART2 |---(TXD)--------+
- +--------+
-
-NOTE: the external pad is named as MFP_PIN_GPIO19, it doesn't necessarily
-mean it's dedicated for GPIO19, only as a hint that internally this pin
-can be routed from GPIO19 of the GPIO controller.
-
-To better understand the change from PXA25x/PXA27x GPIO alternate function
-to this new MFP mechanism, here are several key points:
-
-  1. GPIO controller on PXA3xx is now a dedicated controller, same as other
-     internal controllers like PWM, SSP and UART, with 128 internal signals
-     which can be routed to external through one or more MFPs (e.g. GPIO<0>
-     can be routed through either MFP_PIN_GPIO0 as well as MFP_PIN_GPIO0_2,
-     see arch/arm/mach-pxa/mfp-pxa300.h)
-
-  2. Alternate function configuration is removed from this GPIO controller,
-     the remaining functions are pure GPIO-specific, i.e.
-
-       - GPIO signal level control
-       - GPIO direction control
-       - GPIO level change detection
-
-  3. Low power state for each pin is now controlled by MFP, this means the
-     PGSRx registers on PXA2xx are now useless on PXA3xx
-
-  4. Wakeup detection is now controlled by MFP, PWER does not control the
-     wakeup from GPIO(s) any more, depending on the sleeping state, ADxER
-     (as defined in pxa3xx-regs.h) controls the wakeup from MFP
-
-NOTE: with such a clear separation of MFP and GPIO, by GPIO<xx> we normally
-mean it is a GPIO signal, and by MFP<xxx> or pin xxx, we mean a physical
-pad (or ball).
-
-MFP API Usage
-=============
-
-For board code writers, here are some guidelines:
-
-1. include ONE of the following header files in your <board>.c:
-
-   - #include "mfp-pxa25x.h"
-   - #include "mfp-pxa27x.h"
-   - #include "mfp-pxa300.h"
-   - #include "mfp-pxa320.h"
-   - #include "mfp-pxa930.h"
-
-   NOTE: only one file in your <board>.c, depending on the processors used,
-   because pin configuration definitions may conflict in these file (i.e.
-   same name, different meaning and settings on different processors). E.g.
-   for zylonite platform, which support both PXA300/PXA310 and PXA320, two
-   separate files are introduced: zylonite_pxa300.c and zylonite_pxa320.c
-   (in addition to handle MFP configuration differences, they also handle
-   the other differences between the two combinations).
-
-   NOTE: PXA300 and PXA310 are almost identical in pin configurations (with
-   PXA310 supporting some additional ones), thus the difference is actually
-   covered in a single mfp-pxa300.h.
-
-2. prepare an array for the initial pin configurations, e.g.::
-
-     static unsigned long mainstone_pin_config[] __initdata = {
-	/* Chip Select */
-	GPIO15_nCS_1,
-
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_TFT_LCD_16BPP,
-	GPIO16_PWM0_OUT,	/* Backlight */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	...
-
-	/* GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-     };
-
-   a) once the pin configurations are passed to pxa{2xx,3xx}_mfp_config(),
-   and written to the actual registers, they are useless and may discard,
-   adding '__initdata' will help save some additional bytes here.
-
-   b) when there is only one possible pin configurations for a component,
-   some simplified definitions can be used, e.g. GPIOxx_TFT_LCD_16BPP on
-   PXA25x and PXA27x processors
-
-   c) if by board design, a pin can be configured to wake up the system
-   from low power state, it can be 'OR'ed with any of:
-
-      WAKEUP_ON_EDGE_BOTH
-      WAKEUP_ON_EDGE_RISE
-      WAKEUP_ON_EDGE_FALL
-      WAKEUP_ON_LEVEL_HIGH - specifically for enabling of keypad GPIOs,
-
-   to indicate that this pin has the capability of wake-up the system,
-   and on which edge(s). This, however, doesn't necessarily mean the
-   pin _will_ wakeup the system, it will only when set_irq_wake() is
-   invoked with the corresponding GPIO IRQ (GPIO_IRQ(xx) or gpio_to_irq())
-   and eventually calls gpio_set_wake() for the actual register setting.
-
-   d) although PXA3xx MFP supports edge detection on each pin, the
-   internal logic will only wakeup the system when those specific bits
-   in ADxER registers are set, which can be well mapped to the
-   corresponding peripheral, thus set_irq_wake() can be called with
-   the peripheral IRQ to enable the wakeup.
-
-
-MFP on PXA3xx
-=============
-
-Every external I/O pad on PXA3xx (excluding those for special purpose) has
-one MFP logic associated, and is controlled by one MFP register (MFPR).
-
-The MFPR has the following bit definitions (for PXA300/PXA310/PXA320)::
-
- 31                        16 15 14 13 12 11 10  9  8  7  6  5  4  3  2  1  0
-  +-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
-  |         RESERVED        |PS|PU|PD|  DRIVE |SS|SD|SO|EC|EF|ER|--| AF_SEL |
-  +-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
-
-  Bit 3:   RESERVED
-  Bit 4:   EDGE_RISE_EN - enable detection of rising edge on this pin
-  Bit 5:   EDGE_FALL_EN - enable detection of falling edge on this pin
-  Bit 6:   EDGE_CLEAR   - disable edge detection on this pin
-  Bit 7:   SLEEP_OE_N   - enable outputs during low power modes
-  Bit 8:   SLEEP_DATA   - output data on the pin during low power modes
-  Bit 9:   SLEEP_SEL    - selection control for low power modes signals
-  Bit 13:  PULLDOWN_EN  - enable the internal pull-down resistor on this pin
-  Bit 14:  PULLUP_EN    - enable the internal pull-up resistor on this pin
-  Bit 15:  PULL_SEL     - pull state controlled by selected alternate function
-                          (0) or by PULL{UP,DOWN}_EN bits (1)
-
-  Bit 0 - 2: AF_SEL - alternate function selection, 8 possibilities, from 0-7
-  Bit 10-12: DRIVE  - drive strength and slew rate
-			0b000 - fast 1mA
-			0b001 - fast 2mA
-			0b002 - fast 3mA
-			0b003 - fast 4mA
-			0b004 - slow 6mA
-			0b005 - fast 6mA
-			0b006 - slow 10mA
-			0b007 - fast 10mA
-
-MFP Design for PXA2xx/PXA3xx
-============================
-
-Due to the difference of pin-mux handling between PXA2xx and PXA3xx, a unified
-MFP API is introduced to cover both series of processors.
-
-The basic idea of this design is to introduce definitions for all possible pin
-configurations, these definitions are processor and platform independent, and
-the actual API invoked to convert these definitions into register settings and
-make them effective there-after.
-
-Files Involved
---------------
-
-  - arch/arm/mach-pxa/include/mach/mfp.h
-
-  for
-    1. Unified pin definitions - enum constants for all configurable pins
-    2. processor-neutral bit definitions for a possible MFP configuration
-
-  - arch/arm/mach-pxa/mfp-pxa3xx.h
-
-  for PXA3xx specific MFPR register bit definitions and PXA3xx common pin
-  configurations
-
-  - arch/arm/mach-pxa/mfp-pxa2xx.h
-
-  for PXA2xx specific definitions and PXA25x/PXA27x common pin configurations
-
-  - arch/arm/mach-pxa/mfp-pxa25x.h
-    arch/arm/mach-pxa/mfp-pxa27x.h
-    arch/arm/mach-pxa/mfp-pxa300.h
-    arch/arm/mach-pxa/mfp-pxa320.h
-    arch/arm/mach-pxa/mfp-pxa930.h
-
-  for processor specific definitions
-
-  - arch/arm/mach-pxa/mfp-pxa3xx.c
-  - arch/arm/mach-pxa/mfp-pxa2xx.c
-
-  for implementation of the pin configuration to take effect for the actual
-  processor.
-
-Pin Configuration
------------------
-
-  The following comments are copied from mfp.h (see the actual source code
-  for most updated info)::
-
-    /*
-     * a possible MFP configuration is represented by a 32-bit integer
-     *
-     * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
-     * bit 10..12 - Alternate Function Selection
-     * bit 13..15 - Drive Strength
-     * bit 16..18 - Low Power Mode State
-     * bit 19..20 - Low Power Mode Edge Detection
-     * bit 21..22 - Run Mode Pull State
-     *
-     * to facilitate the definition, the following macros are provided
-     *
-     * MFP_CFG_DEFAULT - default MFP configuration value, with
-     * 		  alternate function = 0,
-     * 		  drive strength = fast 3mA (MFP_DS03X)
-     * 		  low power mode = default
-     * 		  edge detection = none
-     *
-     * MFP_CFG	- default MFPR value with alternate function
-     * MFP_CFG_DRV	- default MFPR value with alternate function and
-     * 		  pin drive strength
-     * MFP_CFG_LPM	- default MFPR value with alternate function and
-     * 		  low power mode
-     * MFP_CFG_X	- default MFPR value with alternate function,
-     * 		  pin drive strength and low power mode
-     */
-
-   Examples of pin configurations are::
-
-     #define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
-
-   which reads GPIO94 can be configured as SSP3_RXD, with alternate function
-   selection of 1, driving strength of 0b101, and a float state in low power
-   modes.
-
-   NOTE: this is the default setting of this pin being configured as SSP3_RXD
-   which can be modified a bit in board code, though it is not recommended to
-   do so, simply because this default setting is usually carefully encoded,
-   and is supposed to work in most cases.
-
-Register Settings
------------------
-
-   Register settings on PXA3xx for a pin configuration is actually very
-   straight-forward, most bits can be converted directly into MFPR value
-   in a easier way. Two sets of MFPR values are calculated: the run-time
-   ones and the low power mode ones, to allow different settings.
-
-   The conversion from a generic pin configuration to the actual register
-   settings on PXA2xx is a bit complicated: many registers are involved,
-   including GAFRx, GPDRx, PGSRx, PWER, PKWR, PFER and PRER. Please see
-   mfp-pxa2xx.c for how the conversion is made.
diff --git a/Documentation/arm/sa1100/assabet.rst b/Documentation/arm/sa1100/assabet.rst
deleted file mode 100644
index a761e128fb086..0000000000000
--- a/Documentation/arm/sa1100/assabet.rst
+++ /dev/null
@@ -1,301 +0,0 @@
-============================================
-The Intel Assabet (SA-1110 evaluation) board
-============================================
-
-Please see:
-http://developer.intel.com
-
-Also some notes from John G Dorsey <jd5q@andrew.cmu.edu>:
-http://www.cs.cmu.edu/~wearable/software/assabet.html
-
-
-Building the kernel
--------------------
-
-To build the kernel with current defaults::
-
-	make assabet_defconfig
-	make oldconfig
-	make zImage
-
-The resulting kernel image should be available in linux/arch/arm/boot/zImage.
-
-
-Installing a bootloader
------------------------
-
-A couple of bootloaders able to boot Linux on Assabet are available:
-
-BLOB (http://www.lartmaker.nl/lartware/blob/)
-
-   BLOB is a bootloader used within the LART project.  Some contributed
-   patches were merged into BLOB to add support for Assabet.
-
-Compaq's Bootldr + John Dorsey's patch for Assabet support
-(http://www.handhelds.org/Compaq/bootldr.html)
-(http://www.wearablegroup.org/software/bootldr/)
-
-   Bootldr is the bootloader developed by Compaq for the iPAQ Pocket PC.
-   John Dorsey has produced add-on patches to add support for Assabet and
-   the JFFS filesystem.
-
-RedBoot (http://sources.redhat.com/redboot/)
-
-   RedBoot is a bootloader developed by Red Hat based on the eCos RTOS
-   hardware abstraction layer.  It supports Assabet amongst many other
-   hardware platforms.
-
-RedBoot is currently the recommended choice since it's the only one to have
-networking support, and is the most actively maintained.
-
-Brief examples on how to boot Linux with RedBoot are shown below.  But first
-you need to have RedBoot installed in your flash memory.  A known to work
-precompiled RedBoot binary is available from the following location:
-
-- ftp://ftp.netwinder.org/users/n/nico/
-- ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/nico/
-- ftp://ftp.handhelds.org/pub/linux/arm/sa-1100-patches/
-
-Look for redboot-assabet*.tgz.  Some installation infos are provided in
-redboot-assabet*.txt.
-
-
-Initial RedBoot configuration
------------------------------
-
-The commands used here are explained in The RedBoot User's Guide available
-on-line at http://sources.redhat.com/ecos/docs.html.
-Please refer to it for explanations.
-
-If you have a CF network card (my Assabet kit contained a CF+ LP-E from
-Socket Communications Inc.), you should strongly consider using it for TFTP
-file transfers.  You must insert it before RedBoot runs since it can't detect
-it dynamically.
-
-To initialize the flash directory::
-
-	fis init -f
-
-To initialize the non-volatile settings, like whether you want to use BOOTP or
-a static IP address, etc, use this command::
-
-	fconfig -i
-
-
-Writing a kernel image into flash
----------------------------------
-
-First, the kernel image must be loaded into RAM.  If you have the zImage file
-available on a TFTP server::
-
-	load zImage -r -b 0x100000
-
-If you rather want to use Y-Modem upload over the serial port::
-
-	load -m ymodem -r -b 0x100000
-
-To write it to flash::
-
-	fis create "Linux kernel" -b 0x100000 -l 0xc0000
-
-
-Booting the kernel
-------------------
-
-The kernel still requires a filesystem to boot.  A ramdisk image can be loaded
-as follows::
-
-	load ramdisk_image.gz -r -b 0x800000
-
-Again, Y-Modem upload can be used instead of TFTP by replacing the file name
-by '-y ymodem'.
-
-Now the kernel can be retrieved from flash like this::
-
-	fis load "Linux kernel"
-
-or loaded as described previously.  To boot the kernel::
-
-	exec -b 0x100000 -l 0xc0000
-
-The ramdisk image could be stored into flash as well, but there are better
-solutions for on-flash filesystems as mentioned below.
-
-
-Using JFFS2
------------
-
-Using JFFS2 (the Second Journalling Flash File System) is probably the most
-convenient way to store a writable filesystem into flash.  JFFS2 is used in
-conjunction with the MTD layer which is responsible for low-level flash
-management.  More information on the Linux MTD can be found on-line at:
-http://www.linux-mtd.infradead.org/.  A JFFS howto with some infos about
-creating JFFS/JFFS2 images is available from the same site.
-
-For instance, a sample JFFS2 image can be retrieved from the same FTP sites
-mentioned below for the precompiled RedBoot image.
-
-To load this file::
-
-	load sample_img.jffs2 -r -b 0x100000
-
-The result should look like::
-
-	RedBoot> load sample_img.jffs2 -r -b 0x100000
-	Raw file loaded 0x00100000-0x00377424
-
-Now we must know the size of the unallocated flash::
-
-	fis free
-
-Result::
-
-	RedBoot> fis free
-	  0x500E0000 .. 0x503C0000
-
-The values above may be different depending on the size of the filesystem and
-the type of flash.  See their usage below as an example and take care of
-substituting yours appropriately.
-
-We must determine some values::
-
-	size of unallocated flash:	0x503c0000 - 0x500e0000 = 0x2e0000
-	size of the filesystem image:	0x00377424 - 0x00100000 = 0x277424
-
-We want to fit the filesystem image of course, but we also want to give it all
-the remaining flash space as well.  To write it::
-
-	fis unlock -f 0x500E0000 -l 0x2e0000
-	fis erase -f 0x500E0000 -l 0x2e0000
-	fis write -b 0x100000 -l 0x277424 -f 0x500E0000
-	fis create "JFFS2" -n -f 0x500E0000 -l 0x2e0000
-
-Now the filesystem is associated to a MTD "partition" once Linux has discovered
-what they are in the boot process.  From Redboot, the 'fis list' command
-displays them::
-
-	RedBoot> fis list
-	Name              FLASH addr  Mem addr    Length      Entry point
-	RedBoot           0x50000000  0x50000000  0x00020000  0x00000000
-	RedBoot config    0x503C0000  0x503C0000  0x00020000  0x00000000
-	FIS directory     0x503E0000  0x503E0000  0x00020000  0x00000000
-	Linux kernel      0x50020000  0x00100000  0x000C0000  0x00000000
-	JFFS2             0x500E0000  0x500E0000  0x002E0000  0x00000000
-
-However Linux should display something like::
-
-	SA1100 flash: probing 32-bit flash bus
-	SA1100 flash: Found 2 x16 devices at 0x0 in 32-bit mode
-	Using RedBoot partition definition
-	Creating 5 MTD partitions on "SA1100 flash":
-	0x00000000-0x00020000 : "RedBoot"
-	0x00020000-0x000e0000 : "Linux kernel"
-	0x000e0000-0x003c0000 : "JFFS2"
-	0x003c0000-0x003e0000 : "RedBoot config"
-	0x003e0000-0x00400000 : "FIS directory"
-
-What's important here is the position of the partition we are interested in,
-which is the third one.  Within Linux, this correspond to /dev/mtdblock2.
-Therefore to boot Linux with the kernel and its root filesystem in flash, we
-need this RedBoot command::
-
-	fis load "Linux kernel"
-	exec -b 0x100000 -l 0xc0000 -c "root=/dev/mtdblock2"
-
-Of course other filesystems than JFFS might be used, like cramfs for example.
-You might want to boot with a root filesystem over NFS, etc.  It is also
-possible, and sometimes more convenient, to flash a filesystem directly from
-within Linux while booted from a ramdisk or NFS.  The Linux MTD repository has
-many tools to deal with flash memory as well, to erase it for example.  JFFS2
-can then be mounted directly on a freshly erased partition and files can be
-copied over directly.  Etc...
-
-
-RedBoot scripting
------------------
-
-All the commands above aren't so useful if they have to be typed in every
-time the Assabet is rebooted.  Therefore it's possible to automate the boot
-process using RedBoot's scripting capability.
-
-For example, I use this to boot Linux with both the kernel and the ramdisk
-images retrieved from a TFTP server on the network::
-
-	RedBoot> fconfig
-	Run script at boot: false true
-	Boot script:
-	Enter script, terminate with empty line
-	>> load zImage -r -b 0x100000
-	>> load ramdisk_ks.gz -r -b 0x800000
-	>> exec -b 0x100000 -l 0xc0000
-	>>
-	Boot script timeout (1000ms resolution): 3
-	Use BOOTP for network configuration: true
-	GDB connection port: 9000
-	Network debug at boot time: false
-	Update RedBoot non-volatile configuration - are you sure (y/n)? y
-
-Then, rebooting the Assabet is just a matter of waiting for the login prompt.
-
-
-
-Nicolas Pitre
-nico@fluxnic.net
-
-June 12, 2001
-
-
-Status of peripherals in -rmk tree (updated 14/10/2001)
--------------------------------------------------------
-
-Assabet:
- Serial ports:
-  Radio:		TX, RX, CTS, DSR, DCD, RI
-   - PM:		Not tested.
-   - COM:		TX, RX, CTS, DSR, DCD, RTS, DTR, PM
-   - PM:		Not tested.
-   - I2C:		Implemented, not fully tested.
-   - L3:		Fully tested, pass.
-   - PM:		Not tested.
-
- Video:
-  - LCD:		Fully tested.  PM
-
-   (LCD doesn't like being blanked with neponset connected)
-
-  - Video out:		Not fully
-
- Audio:
-  UDA1341:
-  -  Playback:		Fully tested, pass.
-  -  Record:		Implemented, not tested.
-  -  PM:			Not tested.
-
-  UCB1200:
-  -  Audio play:	Implemented, not heavily tested.
-  -  Audio rec:		Implemented, not heavily tested.
-  -  Telco audio play:	Implemented, not heavily tested.
-  -  Telco audio rec:	Implemented, not heavily tested.
-  -  POTS control:	No
-  -  Touchscreen:	Yes
-  -  PM:		Not tested.
-
- Other:
-  - PCMCIA:
-  - LPE:		Fully tested, pass.
-  - USB:		No
-  - IRDA:
-  - SIR:		Fully tested, pass.
-  - FIR:		Fully tested, pass.
-  - PM:			Not tested.
-
-Neponset:
- Serial ports:
-  - COM1,2:		TX, RX, CTS, DSR, DCD, RTS, DTR
-  - PM:			Not tested.
-  - USB:		Implemented, not heavily tested.
-  - PCMCIA:		Implemented, not heavily tested.
-  - CF:			Implemented, not heavily tested.
-  - PM:			Not tested.
-
-More stuff can be found in the -np (Nicolas Pitre's) tree.
diff --git a/Documentation/arm/sa1100/cerf.rst b/Documentation/arm/sa1100/cerf.rst
deleted file mode 100644
index 7fa71b609bf9a..0000000000000
--- a/Documentation/arm/sa1100/cerf.rst
+++ /dev/null
@@ -1,35 +0,0 @@
-==============
-CerfBoard/Cube
-==============
-
-*** The StrongARM version of the CerfBoard/Cube has been discontinued ***
-
-The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board
-that measures approximately 2" square. It includes an Ethernet
-controller, an RS232-compatible serial port, a USB function port, and
-one CompactFlash+ slot on the back. Pictures can be found at the
-Intrinsyc website, http://www.intrinsyc.com.
-
-This document describes the support in the Linux kernel for the
-Intrinsyc CerfBoard.
-
-Supported in this version
-=========================
-
-   - CompactFlash+ slot (select PCMCIA in General Setup and any options
-     that may be required)
-   - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in
-     Network Devices)
-   - Serial ports with a serial console (hardcoded to 38400 8N1)
-
-In order to get this kernel onto your Cerf, you need a server that runs
-both BOOTP and TFTP. Detailed instructions should have come with your
-evaluation kit on how to use the bootloader. This series of commands
-will suffice::
-
-   make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig
-   make ARCH=arm CROSS_COMPILE=arm-linux- zImage
-   make ARCH=arm CROSS_COMPILE=arm-linux- modules
-   cp arch/arm/boot/zImage <TFTP directory>
-
-support@intrinsyc.com
diff --git a/Documentation/arm/sa1100/index.rst b/Documentation/arm/sa1100/index.rst
deleted file mode 100644
index c9aed43280fff..0000000000000
--- a/Documentation/arm/sa1100/index.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-====================
-Intel StrongARM 1100
-====================
-
-.. toctree::
-    :maxdepth: 1
-
-    assabet
-    cerf
-    lart
-    serial_uart
diff --git a/Documentation/arm/sa1100/lart.rst b/Documentation/arm/sa1100/lart.rst
deleted file mode 100644
index 94c0568d10953..0000000000000
--- a/Documentation/arm/sa1100/lart.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-====================================
-Linux Advanced Radio Terminal (LART)
-====================================
-
-The LART is a small (7.5 x 10cm) SA-1100 board, designed for embedded
-applications. It has 32 MB DRAM, 4MB Flash ROM, double RS232 and all
-other StrongARM-gadgets. Almost all SA signals are directly accessible
-through a number of connectors. The powersupply accepts voltages
-between 3.5V and 16V and is overdimensioned to support a range of
-daughterboards. A quad Ethernet / IDE / PS2 / sound daughterboard
-is under development, with plenty of others in different stages of
-planning.
-
-The hardware designs for this board have been released under an open license;
-see the LART page at http://www.lartmaker.nl/ for more information.
diff --git a/Documentation/arm/sa1100/serial_uart.rst b/Documentation/arm/sa1100/serial_uart.rst
deleted file mode 100644
index ea983642b9be5..0000000000000
--- a/Documentation/arm/sa1100/serial_uart.rst
+++ /dev/null
@@ -1,51 +0,0 @@
-==================
-SA1100 serial port
-==================
-
-The SA1100 serial port had its major/minor numbers officially assigned::
-
-  > Date: Sun, 24 Sep 2000 21:40:27 -0700
-  > From: H. Peter Anvin <hpa@transmeta.com>
-  > To: Nicolas Pitre <nico@CAM.ORG>
-  > Cc: Device List Maintainer <device@lanana.org>
-  > Subject: Re: device
-  >
-  > Okay.  Note that device numbers 204 and 205 are used for "low density
-  > serial devices", so you will have a range of minors on those majors (the
-  > tty device layer handles this just fine, so you don't have to worry about
-  > doing anything special.)
-  >
-  > So your assignments are:
-  >
-  > 204 char        Low-density serial ports
-  >                   5 = /dev/ttySA0               SA1100 builtin serial port 0
-  >                   6 = /dev/ttySA1               SA1100 builtin serial port 1
-  >                   7 = /dev/ttySA2               SA1100 builtin serial port 2
-  >
-  > 205 char        Low-density serial ports (alternate device)
-  >                   5 = /dev/cusa0                Callout device for ttySA0
-  >                   6 = /dev/cusa1                Callout device for ttySA1
-  >                   7 = /dev/cusa2                Callout device for ttySA2
-  >
-
-You must create those inodes in /dev on the root filesystem used
-by your SA1100-based device::
-
-	mknod ttySA0 c 204 5
-	mknod ttySA1 c 204 6
-	mknod ttySA2 c 204 7
-	mknod cusa0 c 205 5
-	mknod cusa1 c 205 6
-	mknod cusa2 c 205 7
-
-In addition to the creation of the appropriate device nodes above, you
-must ensure your user space applications make use of the correct device
-name. The classic example is the content of the /etc/inittab file where
-you might have a getty process started on ttyS0.
-
-In this case:
-
-- replace occurrences of ttyS0 with ttySA0, ttyS1 with ttySA1, etc.
-
-- don't forget to add 'ttySA0', 'console', or the appropriate tty name
-  in /etc/securetty for root to be allowed to login as well.
diff --git a/Documentation/arm/samsung/bootloader-interface.rst b/Documentation/arm/samsung/bootloader-interface.rst
deleted file mode 100644
index a56f325dae780..0000000000000
--- a/Documentation/arm/samsung/bootloader-interface.rst
+++ /dev/null
@@ -1,81 +0,0 @@
-==========================================================
-Interface between kernel and boot loaders on Exynos boards
-==========================================================
-
-Author: Krzysztof Kozlowski
-
-Date  : 6 June 2015
-
-The document tries to describe currently used interface between Linux kernel
-and boot loaders on Samsung Exynos based boards. This is not a definition
-of interface but rather a description of existing state, a reference
-for information purpose only.
-
-In the document "boot loader" means any of following: U-boot, proprietary
-SBOOT or any other firmware for ARMv7 and ARMv8 initializing the board before
-executing kernel.
-
-
-1. Non-Secure mode
-
-Address:      sysram_ns_base_addr
-
-============= ============================================ ==================
-Offset        Value                                        Purpose
-============= ============================================ ==================
-0x08          exynos_cpu_resume_ns, mcpm_entry_point       System suspend
-0x0c          0x00000bad (Magic cookie)                    System suspend
-0x1c          exynos4_secondary_startup                    Secondary CPU boot
-0x1c + 4*cpu  exynos4_secondary_startup (Exynos4412)       Secondary CPU boot
-0x20          0xfcba0d10 (Magic cookie)                    AFTR
-0x24          exynos_cpu_resume_ns                         AFTR
-0x28 + 4*cpu  0x8 (Magic cookie, Exynos3250)               AFTR
-0x28          0x0 or last value during resume (Exynos542x) System suspend
-============= ============================================ ==================
-
-
-2. Secure mode
-
-Address:      sysram_base_addr
-
-============= ============================================ ==================
-Offset        Value                                        Purpose
-============= ============================================ ==================
-0x00          exynos4_secondary_startup                    Secondary CPU boot
-0x04          exynos4_secondary_startup (Exynos542x)       Secondary CPU boot
-4*cpu         exynos4_secondary_startup (Exynos4412)       Secondary CPU boot
-0x20          exynos_cpu_resume (Exynos4210 r1.0)          AFTR
-0x24          0xfcba0d10 (Magic cookie, Exynos4210 r1.0)   AFTR
-============= ============================================ ==================
-
-Address:      pmu_base_addr
-
-============= ============================================ ==================
-Offset        Value                                        Purpose
-============= ============================================ ==================
-0x0800        exynos_cpu_resume                            AFTR, suspend
-0x0800        mcpm_entry_point (Exynos542x with MCPM)      AFTR, suspend
-0x0804        0xfcba0d10 (Magic cookie)                    AFTR
-0x0804        0x00000bad (Magic cookie)                    System suspend
-0x0814        exynos4_secondary_startup (Exynos4210 r1.1)  Secondary CPU boot
-0x0818        0xfcba0d10 (Magic cookie, Exynos4210 r1.1)   AFTR
-0x081C        exynos_cpu_resume (Exynos4210 r1.1)          AFTR
-============= ============================================ ==================
-
-3. Other (regardless of secure/non-secure mode)
-
-Address:      pmu_base_addr
-
-============= =============================== ===============================
-Offset        Value                           Purpose
-============= =============================== ===============================
-0x0908        Non-zero                        Secondary CPU boot up indicator
-                                              on Exynos3250 and Exynos542x
-============= =============================== ===============================
-
-
-4. Glossary
-
-AFTR - ARM Off Top Running, a low power mode, Cortex cores and many other
-modules are power gated, except the TOP modules
-MCPM - Multi-Cluster Power Management
diff --git a/Documentation/arm/samsung/clksrc-change-registers.awk b/Documentation/arm/samsung/clksrc-change-registers.awk
deleted file mode 100755
index 7be1b8aa7cd9a..0000000000000
--- a/Documentation/arm/samsung/clksrc-change-registers.awk
+++ /dev/null
@@ -1,166 +0,0 @@
-#!/usr/bin/awk -f
-#
-# Copyright 2010 Ben Dooks <ben-linux@fluff.org>
-#
-# Released under GPLv2
-
-# example usage
-# ./clksrc-change-registers.awk arch/arm/plat-s5pc1xx/include/plat/regs-clock.h < src > dst
-
-function extract_value(s)
-{
-    eqat = index(s, "=")
-    comat = index(s, ",")
-    return substr(s, eqat+2, (comat-eqat)-2)
-}
-
-function remove_brackets(b)
-{
-    return substr(b, 2, length(b)-2)
-}
-
-function splitdefine(l, p)
-{
-    r = split(l, tp)
-
-    p[0] = tp[2]
-    p[1] = remove_brackets(tp[3])
-}
-
-function find_length(f)
-{
-    if (0)
-	printf "find_length " f "\n" > "/dev/stderr"
-
-    if (f ~ /0x1/)
-	return 1
-    else if (f ~ /0x3/)
-	return 2
-    else if (f ~ /0x7/)
-	return 3
-    else if (f ~ /0xf/)
-	return 4
-
-    printf "unknown length " f "\n" > "/dev/stderr"
-    exit
-}
-
-function find_shift(s)
-{
-    id = index(s, "<")
-    if (id <= 0) {
-	printf "cannot find shift " s "\n" > "/dev/stderr"
-	exit
-    }
-
-    return substr(s, id+2)
-}
-
-
-BEGIN {
-    if (ARGC < 2) {
-	print "too few arguments" > "/dev/stderr"
-	exit
-    }
-
-# read the header file and find the mask values that we will need
-# to replace and create an associative array of values
-
-    while (getline line < ARGV[1] > 0) {
-	if (line ~ /\#define.*_MASK/ &&
-	    !(line ~ /USB_SIG_MASK/)) {
-	    splitdefine(line, fields)
-	    name = fields[0]
-	    if (0)
-		printf "MASK " line "\n" > "/dev/stderr"
-	    dmask[name,0] = find_length(fields[1])
-	    dmask[name,1] = find_shift(fields[1])
-	    if (0)
-		printf "=> '" name "' LENGTH=" dmask[name,0] " SHIFT=" dmask[name,1] "\n" > "/dev/stderr"
-	} else {
-	}
-    }
-
-    delete ARGV[1]
-}
-
-/clksrc_clk.*=.*{/ {
-    shift=""
-    mask=""
-    divshift=""
-    reg_div=""
-    reg_src=""
-    indent=1
-
-    print $0
-
-    for(; indent >= 1;) {
-	if ((getline line) <= 0) {
-	    printf "unexpected end of file" > "/dev/stderr"
-	    exit 1;
-	}
-
-	if (line ~ /\.shift/) {
-	    shift = extract_value(line)
-	} else if (line ~ /\.mask/) {
-	    mask = extract_value(line)
-	} else if (line ~ /\.reg_divider/) {
-	    reg_div = extract_value(line)
-	} else if (line ~ /\.reg_source/) {
-	    reg_src = extract_value(line)
-	} else if (line ~ /\.divider_shift/) {
-	    divshift = extract_value(line)
-	} else if (line ~ /{/) {
-		indent++
-		print line
-	    } else if (line ~ /}/) {
-	    indent--
-
-	    if (indent == 0) {
-		if (0) {
-		    printf "shift '" shift   "' ='" dmask[shift,0] "'\n" > "/dev/stderr"
-		    printf "mask  '" mask    "'\n" > "/dev/stderr"
-		    printf "dshft '" divshift "'\n" > "/dev/stderr"
-		    printf "rdiv  '" reg_div "'\n" > "/dev/stderr"
-		    printf "rsrc  '" reg_src "'\n" > "/dev/stderr"
-		}
-
-		generated = mask
-		sub(reg_src, reg_div, generated)
-
-		if (0) {
-		    printf "/* rsrc " reg_src " */\n"
-		    printf "/* rdiv " reg_div " */\n"
-		    printf "/* shift " shift " */\n"
-		    printf "/* mask " mask " */\n"
-		    printf "/* generated " generated " */\n"
-		}
-
-		if (reg_div != "") {
-		    printf "\t.reg_div = { "
-		    printf ".reg = " reg_div ", "
-		    printf ".shift = " dmask[generated,1] ", "
-		    printf ".size = " dmask[generated,0] ", "
-		    printf "},\n"
-		}
-
-		printf "\t.reg_src = { "
-		printf ".reg = " reg_src ", "
-		printf ".shift = " dmask[mask,1] ", "
-		printf ".size = " dmask[mask,0] ", "
-
-		printf "},\n"
-
-	    }
-
-	    print line
-	} else {
-	    print line
-	}
-
-	if (0)
-	    printf indent ":" line "\n" > "/dev/stderr"
-    }
-}
-
-// && ! /clksrc_clk.*=.*{/ { print $0 }
diff --git a/Documentation/arm/samsung/gpio.rst b/Documentation/arm/samsung/gpio.rst
deleted file mode 100644
index 27fae0d503615..0000000000000
--- a/Documentation/arm/samsung/gpio.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-===========================
-Samsung GPIO implementation
-===========================
-
-Introduction
-------------
-
-This outlines the Samsung GPIO implementation and the architecture
-specific calls provided alongside the drivers/gpio core.
-
-
-GPIOLIB integration
--------------------
-
-The gpio implementation uses gpiolib as much as possible, only providing
-specific calls for the items that require Samsung specific handling, such
-as pin special-function or pull resistor control.
-
-GPIO numbering is synchronised between the Samsung and gpiolib system.
-
-
-PIN configuration
------------------
-
-Pin configuration is specific to the Samsung architecture, with each SoC
-registering the necessary information for the core gpio configuration
-implementation to configure pins as necessary.
-
-The s3c_gpio_cfgpin() and s3c_gpio_setpull() provide the means for a
-driver or machine to change gpio configuration.
-
-See arch/arm/mach-s3c/gpio-cfg.h for more information on these functions.
diff --git a/Documentation/arm/samsung/index.rst b/Documentation/arm/samsung/index.rst
deleted file mode 100644
index 8142cce3d23ea..0000000000000
--- a/Documentation/arm/samsung/index.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-===========
-Samsung SoC
-===========
-
-.. toctree::
-   :maxdepth: 1
-
-   gpio
-   bootloader-interface
-   overview
diff --git a/Documentation/arm/samsung/overview.rst b/Documentation/arm/samsung/overview.rst
deleted file mode 100644
index 8b15a190169b0..0000000000000
--- a/Documentation/arm/samsung/overview.rst
+++ /dev/null
@@ -1,76 +0,0 @@
-==========================
-Samsung ARM Linux Overview
-==========================
-
-Introduction
-------------
-
-  The Samsung range of ARM SoCs spans many similar devices, from the initial
-  ARM9 through to the newest ARM cores. This document shows an overview of
-  the current kernel support, how to use it and where to find the code
-  that supports this.
-
-  The currently supported SoCs are:
-
-  - S3C64XX: S3C6400 and S3C6410
-  - S5PC110 / S5PV210
-
-
-Configuration
--------------
-
-  A number of configurations are supplied, as there is no current way of
-  unifying all the SoCs into one kernel.
-
-  s5pc110_defconfig
-	- S5PC110 specific default configuration
-  s5pv210_defconfig
-	- S5PV210 specific default configuration
-
-
-Layout
-------
-
-  The directory layout is currently being restructured, and consists of
-  several platform directories and then the machine specific directories
-  of the CPUs being built for.
-
-  plat-samsung provides the base for all the implementations, and is the
-  last in the line of include directories that are processed for the build
-  specific information. It contains the base clock, GPIO and device definitions
-  to get the system running.
-
-  plat-s5p is for s5p specific builds, and contains common support for the
-  S5P specific systems. Not all S5Ps use all the features in this directory
-  due to differences in the hardware.
-
-
-Layout changes
---------------
-
-  The old plat-s3c and plat-s5pc1xx directories have been removed, with
-  support moved to either plat-samsung or plat-s5p as necessary. These moves
-  where to simplify the include and dependency issues involved with having
-  so many different platform directories.
-
-
-Port Contributors
------------------
-
-  Ben Dooks (BJD)
-  Vincent Sanders
-  Herbert Potzl
-  Arnaud Patard (RTP)
-  Roc Wu
-  Klaus Fetscher
-  Dimitry Andric
-  Shannon Holland
-  Guillaume Gourat (NexVision)
-  Christer Weinigel (wingel) (Acer N30)
-  Lucas Correia Villa Real (S3C2400 port)
-
-
-Document Author
----------------
-
-Copyright 2009-2010 Ben Dooks <ben-linux@fluff.org>
diff --git a/Documentation/arm/setup.rst b/Documentation/arm/setup.rst
deleted file mode 100644
index 8e12ef3fb9a76..0000000000000
--- a/Documentation/arm/setup.rst
+++ /dev/null
@@ -1,108 +0,0 @@
-=============================================
-Kernel initialisation parameters on ARM Linux
-=============================================
-
-The following document describes the kernel initialisation parameter
-structure, otherwise known as 'struct param_struct' which is used
-for most ARM Linux architectures.
-
-This structure is used to pass initialisation parameters from the
-kernel loader to the Linux kernel proper, and may be short lived
-through the kernel initialisation process.  As a general rule, it
-should not be referenced outside of arch/arm/kernel/setup.c:setup_arch().
-
-There are a lot of parameters listed in there, and they are described
-below:
-
- page_size
-   This parameter must be set to the page size of the machine, and
-   will be checked by the kernel.
-
- nr_pages
-   This is the total number of pages of memory in the system.  If
-   the memory is banked, then this should contain the total number
-   of pages in the system.
-
-   If the system contains separate VRAM, this value should not
-   include this information.
-
- ramdisk_size
-   This is now obsolete, and should not be used.
-
- flags
-   Various kernel flags, including:
-
-    =====   ========================
-    bit 0   1 = mount root read only
-    bit 1   unused
-    bit 2   0 = load ramdisk
-    bit 3   0 = prompt for ramdisk
-    =====   ========================
-
- rootdev
-   major/minor number pair of device to mount as the root filesystem.
-
- video_num_cols / video_num_rows
-   These two together describe the character size of the dummy console,
-   or VGA console character size.  They should not be used for any other
-   purpose.
-
-   It's generally a good idea to set these to be either standard VGA, or
-   the equivalent character size of your fbcon display.  This then allows
-   all the bootup messages to be displayed correctly.
-
- video_x / video_y
-   This describes the character position of cursor on VGA console, and
-   is otherwise unused. (should not be used for other console types, and
-   should not be used for other purposes).
-
- memc_control_reg
-   MEMC chip control register for Acorn Archimedes and Acorn A5000
-   based machines.  May be used differently by different architectures.
-
- sounddefault
-   Default sound setting on Acorn machines.  May be used differently by
-   different architectures.
-
- adfsdrives
-   Number of ADFS/MFM disks.  May be used differently by different
-   architectures.
-
- bytes_per_char_h / bytes_per_char_v
-   These are now obsolete, and should not be used.
-
- pages_in_bank[4]
-   Number of pages in each bank of the systems memory (used for RiscPC).
-   This is intended to be used on systems where the physical memory
-   is non-contiguous from the processors point of view.
-
- pages_in_vram
-   Number of pages in VRAM (used on Acorn RiscPC).  This value may also
-   be used by loaders if the size of the video RAM can't be obtained
-   from the hardware.
-
- initrd_start / initrd_size
-   This describes the kernel virtual start address and size of the
-   initial ramdisk.
-
- rd_start
-   Start address in sectors of the ramdisk image on a floppy disk.
-
- system_rev
-   system revision number.
-
- system_serial_low / system_serial_high
-   system 64-bit serial number
-
- mem_fclk_21285
-   The speed of the external oscillator to the 21285 (footbridge),
-   which control's the speed of the memory bus, timer & serial port.
-   Depending upon the speed of the cpu its value can be between
-   0-66 MHz. If no params are passed or a value of zero is passed,
-   then a value of 50 Mhz is the default on 21285 architectures.
-
- paths[8][128]
-   These are now obsolete, and should not be used.
-
- commandline
-   Kernel command line parameters.  Details can be found elsewhere.
diff --git a/Documentation/arm/spear/overview.rst b/Documentation/arm/spear/overview.rst
deleted file mode 100644
index 1a77f6b213b64..0000000000000
--- a/Documentation/arm/spear/overview.rst
+++ /dev/null
@@ -1,66 +0,0 @@
-========================
-SPEAr ARM Linux Overview
-========================
-
-Introduction
-------------
-
-  SPEAr (Structured Processor Enhanced Architecture).
-  weblink : http://www.st.com/spear
-
-  The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
-  supported by the 'spear' platform of ARM Linux. Currently SPEAr1310,
-  SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported.
-
-  Hierarchy in SPEAr is as follows:
-
-  SPEAr (Platform)
-
-	- SPEAr3XX (3XX SOC series, based on ARM9)
-		- SPEAr300 (SOC)
-			- SPEAr300 Evaluation Board
-		- SPEAr310 (SOC)
-			- SPEAr310 Evaluation Board
-		- SPEAr320 (SOC)
-			- SPEAr320 Evaluation Board
-	- SPEAr6XX (6XX SOC series, based on ARM9)
-		- SPEAr600 (SOC)
-			- SPEAr600 Evaluation Board
-	- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
-		- SPEAr1310 (SOC)
-			- SPEAr1310 Evaluation Board
-		- SPEAr1340 (SOC)
-			- SPEAr1340 Evaluation Board
-
-Configuration
--------------
-
-  A generic configuration is provided for each machine, and can be used as the
-  default by::
-
-	make spear13xx_defconfig
-	make spear3xx_defconfig
-	make spear6xx_defconfig
-
-Layout
-------
-
-  The common files for multiple machine families (SPEAr3xx, SPEAr6xx and
-  SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear
-  with headers in plat/.
-
-  Each machine series have a directory with name arch/arm/mach-spear followed by
-  series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
-
-  Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for
-  spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is
-  mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific
-  files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and
-  spear600.c.  mach-spear* doesn't contains board specific files as they fully
-  support Flattened Device Tree.
-
-
-Document Author
----------------
-
-  Viresh Kumar <vireshk@kernel.org>, (c) 2010-2012 ST Microelectronics
diff --git a/Documentation/arm/sti/overview.rst b/Documentation/arm/sti/overview.rst
deleted file mode 100644
index ae16aced800f4..0000000000000
--- a/Documentation/arm/sti/overview.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-======================
-STi ARM Linux Overview
-======================
-
-Introduction
-------------
-
-  The ST Microelectronics Multimedia and Application Processors range of
-  CortexA9 System-on-Chip are supported by the 'STi' platform of
-  ARM Linux. Currently STiH407, STiH410 and STiH418 are supported.
-
-
-configuration
--------------
-
-  The configuration for the STi platform is supported via the multi_v7_defconfig.
-
-Layout
-------
-
-  All the files for multiple machine families (STiH407, STiH410, and STiH418)
-  are located in the platform code contained in arch/arm/mach-sti
-
-  There is a generic board board-dt.c in the mach folder which support
-  Flattened Device Tree, which means, It works with any compatible board with
-  Device Trees.
-
-
-Document Author
----------------
-
-  Srinivas Kandagatla <srinivas.kandagatla@st.com>, (c) 2013 ST Microelectronics
diff --git a/Documentation/arm/sti/stih407-overview.rst b/Documentation/arm/sti/stih407-overview.rst
deleted file mode 100644
index 027e75bc7b7c4..0000000000000
--- a/Documentation/arm/sti/stih407-overview.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-================
-STiH407 Overview
-================
-
-Introduction
-------------
-
-    The STiH407 is the new generation of SoC for Multi-HD, AVC set-top boxes
-    and server/connected client application for satellite, cable, terrestrial
-    and IP-STB markets.
-
-    Features
-    - ARM Cortex-A9 1.5 GHz dual core CPU (28nm)
-    - SATA2, USB 3.0, PCIe, Gbit Ethernet
-
-Document Author
----------------
-
-  Maxime Coquelin <maxime.coquelin@st.com>, (c) 2014 ST Microelectronics
diff --git a/Documentation/arm/sti/stih418-overview.rst b/Documentation/arm/sti/stih418-overview.rst
deleted file mode 100644
index b563c1f4fe5ad..0000000000000
--- a/Documentation/arm/sti/stih418-overview.rst
+++ /dev/null
@@ -1,21 +0,0 @@
-================
-STiH418 Overview
-================
-
-Introduction
-------------
-
-    The STiH418 is the new generation of SoC for UHDp60 set-top boxes
-    and server/connected client application for satellite, cable, terrestrial
-    and IP-STB markets.
-
-    Features
-    - ARM Cortex-A9 1.5 GHz quad core CPU (28nm)
-    - SATA2, USB 3.0, PCIe, Gbit Ethernet
-    - HEVC L5.1 Main 10
-    - VP9
-
-Document Author
----------------
-
-  Maxime Coquelin <maxime.coquelin@st.com>, (c) 2015 ST Microelectronics
diff --git a/Documentation/arm/stm32/overview.rst b/Documentation/arm/stm32/overview.rst
deleted file mode 100644
index 85cfc84107983..0000000000000
--- a/Documentation/arm/stm32/overview.rst
+++ /dev/null
@@ -1,34 +0,0 @@
-========================
-STM32 ARM Linux Overview
-========================
-
-Introduction
-------------
-
-The STMicroelectronics STM32 family of Cortex-A microprocessors (MPUs) and
-Cortex-M microcontrollers (MCUs) are supported by the 'STM32' platform of
-ARM Linux.
-
-Configuration
--------------
-
-For MCUs, use the provided default configuration:
-        make stm32_defconfig
-For MPUs, use multi_v7 configuration:
-        make multi_v7_defconfig
-
-Layout
-------
-
-All the files for multiple machine families are located in the platform code
-contained in arch/arm/mach-stm32
-
-There is a generic board board-dt.c in the mach folder which support
-Flattened Device Tree, which means, it works with any compatible board with
-Device Trees.
-
-:Authors:
-
-- Maxime Coquelin <mcoquelin.stm32@gmail.com>
-- Ludovic Barre <ludovic.barre@st.com>
-- Gerald Baeza <gerald.baeza@st.com>
diff --git a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
deleted file mode 100644
index 2945e0e331047..0000000000000
--- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
+++ /dev/null
@@ -1,415 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=======================
-STM32 DMA-MDMA chaining
-=======================
-
-
-Introduction
-------------
-
-  This document describes the STM32 DMA-MDMA chaining feature. But before going
-  further, let's introduce the peripherals involved.
-
-  To offload data transfers from the CPU, STM32 microprocessors (MPUs) embed
-  direct memory access controllers (DMA).
-
-  STM32MP1 SoCs embed both STM32 DMA and STM32 MDMA controllers. STM32 DMA
-  request routing capabilities are enhanced by a DMA request multiplexer
-  (STM32 DMAMUX).
-
-  **STM32 DMAMUX**
-
-  STM32 DMAMUX routes any DMA request from a given peripheral to any STM32 DMA
-  controller (STM32MP1 counts two STM32 DMA controllers) channels.
-
-  **STM32 DMA**
-
-  STM32 DMA is mainly used to implement central data buffer storage (usually in
-  the system SRAM) for different peripheral. It can access external RAMs but
-  without the ability to generate convenient burst transfer ensuring the best
-  load of the AXI.
-
-  **STM32 MDMA**
-
-  STM32 MDMA (Master DMA) is mainly used to manage direct data transfers between
-  RAM data buffers without CPU intervention. It can also be used in a
-  hierarchical structure that uses STM32 DMA as first level data buffer
-  interfaces for AHB peripherals, while the STM32 MDMA acts as a second level
-  DMA with better performance. As a AXI/AHB master, STM32 MDMA can take control
-  of the AXI/AHB bus.
-
-
-Principles
-----------
-
-  STM32 DMA-MDMA chaining feature relies on the strengths of STM32 DMA and
-  STM32 MDMA controllers.
-
-  STM32 DMA has a circular Double Buffer Mode (DBM). At each end of transaction
-  (when DMA data counter - DMA_SxNDTR - reaches 0), the memory pointers
-  (configured with DMA_SxSM0AR and DMA_SxM1AR) are swapped and the DMA data
-  counter is automatically reloaded. This allows the SW or the STM32 MDMA to
-  process one memory area while the second memory area is being filled/used by
-  the STM32 DMA transfer.
-
-  With STM32 MDMA linked-list mode, a single request initiates the data array
-  (collection of nodes) to be transferred until the linked-list pointer for the
-  channel is null. The channel transfer complete of the last node is the end of
-  transfer, unless first and last nodes are linked to each other, in such a
-  case, the linked-list loops on to create a circular MDMA transfer.
-
-  STM32 MDMA has direct connections with STM32 DMA. This enables autonomous
-  communication and synchronization between peripherals, thus saving CPU
-  resources and bus congestion. Transfer Complete signal of STM32 DMA channel
-  can triggers STM32 MDMA transfer. STM32 MDMA can clear the request generated
-  by the STM32 DMA by writing to its Interrupt Clear register (whose address is
-  stored in MDMA_CxMAR, and bit mask in MDMA_CxMDR).
-
-  .. table:: STM32 MDMA interconnect table with STM32 DMA
-
-    +--------------+----------------+-----------+------------+
-    | STM32 DMAMUX | STM32 DMA      | STM32 DMA | STM32 MDMA |
-    | channels     | channels       | Transfer  | request    |
-    |              |                | complete  |            |
-    |              |                | signal    |            |
-    +==============+================+===========+============+
-    | Channel *0*  | DMA1 channel 0 | dma1_tcf0 | *0x00*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *1*  | DMA1 channel 1 | dma1_tcf1 | *0x01*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *2*  | DMA1 channel 2 | dma1_tcf2 | *0x02*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *3*  | DMA1 channel 3 | dma1_tcf3 | *0x03*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *4*  | DMA1 channel 4 | dma1_tcf4 | *0x04*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *5*  | DMA1 channel 5 | dma1_tcf5 | *0x05*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *6*  | DMA1 channel 6 | dma1_tcf6 | *0x06*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *7*  | DMA1 channel 7 | dma1_tcf7 | *0x07*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *8*  | DMA2 channel 0 | dma2_tcf0 | *0x08*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *9*  | DMA2 channel 1 | dma2_tcf1 | *0x09*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *10* | DMA2 channel 2 | dma2_tcf2 | *0x0A*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *11* | DMA2 channel 3 | dma2_tcf3 | *0x0B*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *12* | DMA2 channel 4 | dma2_tcf4 | *0x0C*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *13* | DMA2 channel 5 | dma2_tcf5 | *0x0D*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *14* | DMA2 channel 6 | dma2_tcf6 | *0x0E*     |
-    +--------------+----------------+-----------+------------+
-    | Channel *15* | DMA2 channel 7 | dma2_tcf7 | *0x0F*     |
-    +--------------+----------------+-----------+------------+
-
-  STM32 DMA-MDMA chaining feature then uses a SRAM buffer. STM32MP1 SoCs embed
-  three fast access static internal RAMs of various size, used for data storage.
-  Due to STM32 DMA legacy (within microcontrollers), STM32 DMA performances are
-  bad with DDR, while they are optimal with SRAM. Hence the SRAM buffer used
-  between STM32 DMA and STM32 MDMA. This buffer is split in two equal periods
-  and STM32 DMA uses one period while STM32 MDMA uses the other period
-  simultaneously.
-  ::
-
-                    dma[1:2]-tcf[0:7]
-                   .----------------.
-     ____________ '    _________     V____________
-    | STM32 DMA  |    /  __|>_  \    | STM32 MDMA |
-    |------------|   |  /     \  |   |------------|
-    | DMA_SxM0AR |<=>| | SRAM  | |<=>| []-[]...[] |
-    | DMA_SxM1AR |   |  \_____/  |   |            |
-    |____________|    \___<|____/    |____________|
-
-  STM32 DMA-MDMA chaining uses (struct dma_slave_config).peripheral_config to
-  exchange the parameters needed to configure MDMA. These parameters are
-  gathered into a u32 array with three values:
-
-  * the STM32 MDMA request (which is actually the DMAMUX channel ID),
-  * the address of the STM32 DMA register to clear the Transfer Complete
-    interrupt flag,
-  * the mask of the Transfer Complete interrupt flag of the STM32 DMA channel.
-
-Device Tree updates for STM32 DMA-MDMA chaining support
--------------------------------------------------------
-
-  **1. Allocate a SRAM buffer**
-
-    SRAM device tree node is defined in SoC device tree. You can refer to it in
-    your board device tree to define your SRAM pool.
-    ::
-
-          &sram {
-                  my_foo_device_dma_pool: dma-sram@0 {
-                          reg = <0x0 0x1000>;
-                  };
-          };
-
-    Be careful of the start index, in case there are other SRAM consumers.
-    Define your pool size strategically: to optimise chaining, the idea is that
-    STM32 DMA and STM32 MDMA can work simultaneously, on each buffer of the
-    SRAM.
-    If the SRAM period is greater than the expected DMA transfer, then STM32 DMA
-    and STM32 MDMA will work sequentially instead of simultaneously. It is not a
-    functional issue but it is not optimal.
-
-    Don't forget to refer to your SRAM pool in your device node. You need to
-    define a new property.
-    ::
-
-          &my_foo_device {
-                  ...
-                  my_dma_pool = &my_foo_device_dma_pool;
-          };
-
-    Then get this SRAM pool in your foo driver and allocate your SRAM buffer.
-
-  **2. Allocate a STM32 DMA channel and a STM32 MDMA channel**
-
-    You need to define an extra channel in your device tree node, in addition to
-    the one you should already have for "classic" DMA operation.
-
-    This new channel must be taken from STM32 MDMA channels, so, the phandle of
-    the DMA controller to use is the MDMA controller's one.
-    ::
-
-          &my_foo_device {
-                  [...]
-                  my_dma_pool = &my_foo_device_dma_pool;
-                  dmas = <&dmamux1 ...>,                // STM32 DMA channel
-                         <&mdma1 0 0x3 0x1200000a 0 0>; // + STM32 MDMA channel
-          };
-
-    Concerning STM32 MDMA bindings:
-
-    1. The request line number : whatever the value here, it will be overwritten
-    by MDMA driver with the STM32 DMAMUX channel ID passed through
-    (struct dma_slave_config).peripheral_config
-
-    2. The priority level : choose Very High (0x3) so that your channel will
-    take priority other the other during request arbitration
-
-    3. A 32bit mask specifying the DMA channel configuration : source and
-    destination address increment, block transfer with 128 bytes per single
-    transfer
-
-    4. The 32bit value specifying the register to be used to acknowledge the
-    request: it will be overwritten by MDMA driver, with the DMA channel
-    interrupt flag clear register address passed through
-    (struct dma_slave_config).peripheral_config
-
-    5. The 32bit mask specifying the value to be written to acknowledge the
-    request: it will be overwritten by MDMA driver, with the DMA channel
-    Transfer Complete flag passed through
-    (struct dma_slave_config).peripheral_config
-
-Driver updates for STM32 DMA-MDMA chaining support in foo driver
-----------------------------------------------------------------
-
-  **0. (optional) Refactor the original sg_table if dmaengine_prep_slave_sg()**
-
-    In case of dmaengine_prep_slave_sg(), the original sg_table can't be used as
-    is. Two new sg_tables must be created from the original one. One for
-    STM32 DMA transfer (where memory address targets now the SRAM buffer instead
-    of DDR buffer) and one for STM32 MDMA transfer (where memory address targets
-    the DDR buffer).
-
-    The new sg_list items must fit SRAM period length. Here is an example for
-    DMA_DEV_TO_MEM:
-    ::
-
-      /*
-        * Assuming sgl and nents, respectively the initial scatterlist and its
-        * length.
-        * Assuming sram_dma_buf and sram_period, respectively the memory
-        * allocated from the pool for DMA usage, and the length of the period,
-        * which is half of the sram_buf size.
-        */
-      struct sg_table new_dma_sgt, new_mdma_sgt;
-      struct scatterlist *s, *_sgl;
-      dma_addr_t ddr_dma_buf;
-      u32 new_nents = 0, len;
-      int i;
-
-      /* Count the number of entries needed */
-      for_each_sg(sgl, s, nents, i)
-              if (sg_dma_len(s) > sram_period)
-                      new_nents += DIV_ROUND_UP(sg_dma_len(s), sram_period);
-              else
-                      new_nents++;
-
-      /* Create sg table for STM32 DMA channel */
-      ret = sg_alloc_table(&new_dma_sgt, new_nents, GFP_ATOMIC);
-      if (ret)
-              dev_err(dev, "DMA sg table alloc failed\n");
-
-      for_each_sg(new_dma_sgt.sgl, s, new_dma_sgt.nents, i) {
-              _sgl = sgl;
-              sg_dma_len(s) = min(sg_dma_len(_sgl), sram_period);
-              /* Targets the beginning = first half of the sram_buf */
-              s->dma_address = sram_buf;
-              /*
-                * Targets the second half of the sram_buf
-                * for odd indexes of the item of the sg_list
-                */
-              if (i & 1)
-                      s->dma_address += sram_period;
-      }
-
-      /* Create sg table for STM32 MDMA channel */
-      ret = sg_alloc_table(&new_mdma_sgt, new_nents, GFP_ATOMIC);
-      if (ret)
-              dev_err(dev, "MDMA sg_table alloc failed\n");
-
-      _sgl = sgl;
-      len = sg_dma_len(sgl);
-      ddr_dma_buf = sg_dma_address(sgl);
-      for_each_sg(mdma_sgt.sgl, s, mdma_sgt.nents, i) {
-              size_t bytes = min_t(size_t, len, sram_period);
-
-              sg_dma_len(s) = bytes;
-              sg_dma_address(s) = ddr_dma_buf;
-              len -= bytes;
-
-              if (!len && sg_next(_sgl)) {
-                      _sgl = sg_next(_sgl);
-                      len = sg_dma_len(_sgl);
-                      ddr_dma_buf = sg_dma_address(_sgl);
-              } else {
-                      ddr_dma_buf += bytes;
-              }
-      }
-
-    Don't forget to release these new sg_tables after getting the descriptors
-    with dmaengine_prep_slave_sg().
-
-  **1. Set controller specific parameters**
-
-    First, use dmaengine_slave_config() with a struct dma_slave_config to
-    configure STM32 DMA channel. You just have to take care of DMA addresses,
-    the memory address (depending on the transfer direction) must point on your
-    SRAM buffer, and set (struct dma_slave_config).peripheral_size != 0.
-
-    STM32 DMA driver will check (struct dma_slave_config).peripheral_size to
-    determine if chaining is being used or not. If it is used, then STM32 DMA
-    driver fills (struct dma_slave_config).peripheral_config with an array of
-    three u32 : the first one containing STM32 DMAMUX channel ID, the second one
-    the channel interrupt flag clear register address, and the third one the
-    channel Transfer Complete flag mask.
-
-    Then, use dmaengine_slave_config with another struct dma_slave_config to
-    configure STM32 MDMA channel. Take care of DMA addresses, the device address
-    (depending on the transfer direction) must point on your SRAM buffer, and
-    the memory address must point to the buffer originally used for "classic"
-    DMA operation. Use the previous (struct dma_slave_config).peripheral_size
-    and .peripheral_config that have been updated by STM32 DMA driver, to set
-    (struct dma_slave_config).peripheral_size and .peripheral_config of the
-    struct dma_slave_config to configure STM32 MDMA channel.
-    ::
-
-      struct dma_slave_config dma_conf;
-      struct dma_slave_config mdma_conf;
-
-      memset(&dma_conf, 0, sizeof(dma_conf));
-      [...]
-      config.direction = DMA_DEV_TO_MEM;
-      config.dst_addr = sram_dma_buf;        // SRAM buffer
-      config.peripheral_size = 1;            // peripheral_size != 0 => chaining
-
-      dmaengine_slave_config(dma_chan, &dma_config);
-
-      memset(&mdma_conf, 0, sizeof(mdma_conf));
-      config.direction = DMA_DEV_TO_MEM;
-      mdma_conf.src_addr = sram_dma_buf;     // SRAM buffer
-      mdma_conf.dst_addr = rx_dma_buf;       // original memory buffer
-      mdma_conf.peripheral_size = dma_conf.peripheral_size;       // <- dma_conf
-      mdma_conf.peripheral_config = dma_config.peripheral_config; // <- dma_conf
-
-      dmaengine_slave_config(mdma_chan, &mdma_conf);
-
-  **2. Get a descriptor for STM32 DMA channel transaction**
-
-    In the same way you get your descriptor for your "classic" DMA operation,
-    you just have to replace the original sg_list (in case of
-    dmaengine_prep_slave_sg()) with the new sg_list using SRAM buffer, or to
-    replace the original buffer address, length and period (in case of
-    dmaengine_prep_dma_cyclic()) with the new SRAM buffer.
-
-  **3. Get a descriptor for STM32 MDMA channel transaction**
-
-    If you previously get descriptor (for STM32 DMA) with
-
-    * dmaengine_prep_slave_sg(), then use dmaengine_prep_slave_sg() for
-      STM32 MDMA;
-    * dmaengine_prep_dma_cyclic(), then use dmaengine_prep_dma_cyclic() for
-      STM32 MDMA.
-
-    Use the new sg_list using SRAM buffer (in case of dmaengine_prep_slave_sg())
-    or, depending on the transfer direction, either the original DDR buffer (in
-    case of DMA_DEV_TO_MEM) or the SRAM buffer (in case of DMA_MEM_TO_DEV), the
-    source address being previously set with dmaengine_slave_config().
-
-  **4. Submit both transactions**
-
-    Before submitting your transactions, you may need to define on which
-    descriptor you want a callback to be called at the end of the transfer
-    (dmaengine_prep_slave_sg()) or the period (dmaengine_prep_dma_cyclic()).
-    Depending on the direction, set the callback on the descriptor that finishes
-    the overal transfer:
-
-    * DMA_DEV_TO_MEM: set the callback on the "MDMA" descriptor
-    * DMA_MEM_TO_DEV: set the callback on the "DMA" descriptor
-
-    Then, submit the descriptors whatever the order, with dmaengine_tx_submit().
-
-  **5. Issue pending requests (and wait for callback notification)**
-
-  As STM32 MDMA channel transfer is triggered by STM32 DMA, you must issue
-  STM32 MDMA channel before STM32 DMA channel.
-
-  If any, your callback will be called to warn you about the end of the overal
-  transfer or the period completion.
-
-  Don't forget to terminate both channels. STM32 DMA channel is configured in
-  cyclic Double-Buffer mode so it won't be disabled by HW, you need to terminate
-  it. STM32 MDMA channel will be stopped by HW in case of sg transfer, but not
-  in case of cyclic transfer. You can terminate it whatever the kind of transfer.
-
-  **STM32 DMA-MDMA chaining DMA_MEM_TO_DEV special case**
-
-  STM32 DMA-MDMA chaining in DMA_MEM_TO_DEV is a special case. Indeed, the
-  STM32 MDMA feeds the SRAM buffer with the DDR data, and the STM32 DMA reads
-  data from SRAM buffer. So some data (the first period) have to be copied in
-  SRAM buffer when the STM32 DMA starts to read.
-
-  A trick could be pausing the STM32 DMA channel (that will raise a Transfer
-  Complete signal, triggering the STM32 MDMA channel), but the first data read
-  by the STM32 DMA could be "wrong". The proper way is to prepare the first SRAM
-  period with dmaengine_prep_dma_memcpy(). Then this first period should be
-  "removed" from the sg or the cyclic transfer.
-
-  Due to this complexity, rather use the STM32 DMA-MDMA chaining for
-  DMA_DEV_TO_MEM and keep the "classic" DMA usage for DMA_MEM_TO_DEV, unless
-  you're not afraid.
-
-Resources
----------
-
-  Application note, datasheet and reference manual are available on ST website
-  (STM32MP1_).
-
-  Dedicated focus on three application notes (AN5224_, AN4031_ & AN5001_)
-  dealing with STM32 DMAMUX, STM32 DMA and STM32 MDMA.
-
-.. _STM32MP1: https://www.st.com/en/microcontrollers-microprocessors/stm32mp1-series.html
-.. _AN5224: https://www.st.com/resource/en/application_note/an5224-stm32-dmamux-the-dma-request-router-stmicroelectronics.pdf
-.. _AN4031: https://www.st.com/resource/en/application_note/dm00046011-using-the-stm32f2-stm32f4-and-stm32f7-series-dma-controller-stmicroelectronics.pdf
-.. _AN5001: https://www.st.com/resource/en/application_note/an5001-stm32cube-expansion-package-for-stm32h7-series-mdma-stmicroelectronics.pdf
-
-:Authors:
-
-- Amelie Delaunay <amelie.delaunay@foss.st.com>
\ No newline at end of file
diff --git a/Documentation/arm/stm32/stm32f429-overview.rst b/Documentation/arm/stm32/stm32f429-overview.rst
deleted file mode 100644
index a7ebe8ea66970..0000000000000
--- a/Documentation/arm/stm32/stm32f429-overview.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-==================
-STM32F429 Overview
-==================
-
-Introduction
-------------
-
-The STM32F429 is a Cortex-M4 MCU aimed at various applications.
-It features:
-
-- ARM Cortex-M4 up to 180MHz with FPU
-- 2MB internal Flash Memory
-- External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
-- I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
-- LCD controller & Camera interface
-- Cryptographic processor
-
-Resources
----------
-
-Datasheet and reference manual are publicly available on ST website (STM32F429_).
-
-.. _STM32F429: http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
-
-:Authors: Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f746-overview.rst b/Documentation/arm/stm32/stm32f746-overview.rst
deleted file mode 100644
index 78befddc77405..0000000000000
--- a/Documentation/arm/stm32/stm32f746-overview.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-==================
-STM32F746 Overview
-==================
-
-Introduction
-------------
-
-The STM32F746 is a Cortex-M7 MCU aimed at various applications.
-It features:
-
-- Cortex-M7 core running up to @216MHz
-- 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
-- FMC controller to connect SDRAM, NOR and NAND memories
-- Dual mode QSPI
-- SD/MMC/SDIO support
-- Ethernet controller
-- USB OTFG FS & HS controllers
-- I2C, SPI, CAN busses support
-- Several 16 & 32 bits general purpose timers
-- Serial Audio interface
-- LCD controller
-- HDMI-CEC
-- SPDIFRX
-
-Resources
----------
-
-Datasheet and reference manual are publicly available on ST website (STM32F746_).
-
-.. _STM32F746: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
-
-:Authors: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32f769-overview.rst b/Documentation/arm/stm32/stm32f769-overview.rst
deleted file mode 100644
index e482980ddf212..0000000000000
--- a/Documentation/arm/stm32/stm32f769-overview.rst
+++ /dev/null
@@ -1,34 +0,0 @@
-==================
-STM32F769 Overview
-==================
-
-Introduction
-------------
-
-The STM32F769 is a Cortex-M7 MCU aimed at various applications.
-It features:
-
-- Cortex-M7 core running up to @216MHz
-- 2MB internal flash, 512KBytes internal RAM (+4KB of backup SRAM)
-- FMC controller to connect SDRAM, NOR and NAND memories
-- Dual mode QSPI
-- SD/MMC/SDIO support*2
-- Ethernet controller
-- USB OTFG FS & HS controllers
-- I2C*4, SPI*6, CAN*3 busses support
-- Several 16 & 32 bits general purpose timers
-- Serial Audio interface*2
-- LCD controller
-- HDMI-CEC
-- DSI
-- SPDIFRX
-- MDIO salave interface
-
-Resources
----------
-
-Datasheet and reference manual are publicly available on ST website (STM32F769_).
-
-.. _STM32F769: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32-high-performance-mcus/stm32f7-series/stm32f7x9/stm32f769ni.html
-
-:Authors: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32h743-overview.rst b/Documentation/arm/stm32/stm32h743-overview.rst
deleted file mode 100644
index 4e15f1a42730a..0000000000000
--- a/Documentation/arm/stm32/stm32h743-overview.rst
+++ /dev/null
@@ -1,33 +0,0 @@
-==================
-STM32H743 Overview
-==================
-
-Introduction
-------------
-
-The STM32H743 is a Cortex-M7 MCU aimed at various applications.
-It features:
-
-- Cortex-M7 core running up to @400MHz
-- 2MB internal flash, 1MBytes internal RAM
-- FMC controller to connect SDRAM, NOR and NAND memories
-- Dual mode QSPI
-- SD/MMC/SDIO support
-- Ethernet controller
-- USB OTFG FS & HS controllers
-- I2C, SPI, CAN busses support
-- Several 16 & 32 bits general purpose timers
-- Serial Audio interface
-- LCD controller
-- HDMI-CEC
-- SPDIFRX
-- DFSDM
-
-Resources
----------
-
-Datasheet and reference manual are publicly available on ST website (STM32H743_).
-
-.. _STM32H743: http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
-
-:Authors: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32h750-overview.rst b/Documentation/arm/stm32/stm32h750-overview.rst
deleted file mode 100644
index 0e51235c95477..0000000000000
--- a/Documentation/arm/stm32/stm32h750-overview.rst
+++ /dev/null
@@ -1,34 +0,0 @@
-==================
-STM32H750 Overview
-==================
-
-Introduction
-------------
-
-The STM32H750 is a Cortex-M7 MCU aimed at various applications.
-It features:
-
-- Cortex-M7 core running up to @480MHz
-- 128K internal flash, 1MBytes internal RAM
-- FMC controller to connect SDRAM, NOR and NAND memories
-- Dual mode QSPI
-- SD/MMC/SDIO support
-- Ethernet controller
-- USB OTFG FS & HS controllers
-- I2C, SPI, CAN busses support
-- Several 16 & 32 bits general purpose timers
-- Serial Audio interface
-- LCD controller
-- HDMI-CEC
-- SPDIFRX
-- DFSDM
-
-Resources
----------
-
-Datasheet and reference manual are publicly available on ST website (STM32H750_).
-
-.. _STM32H750: https://www.st.com/en/microcontrollers-microprocessors/stm32h750-value-line.html
-
-:Authors: Dillon Min <dillon.minfei@gmail.com>
-
diff --git a/Documentation/arm/stm32/stm32mp13-overview.rst b/Documentation/arm/stm32/stm32mp13-overview.rst
deleted file mode 100644
index 3bb9492dad49f..0000000000000
--- a/Documentation/arm/stm32/stm32mp13-overview.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-===================
-STM32MP13 Overview
-===================
-
-Introduction
-------------
-
-The STM32MP131/STM32MP133/STM32MP135 are Cortex-A MPU aimed at various applications.
-They feature:
-
-- One Cortex-A7 application core
-- Standard memories interface support
-- Standard connectivity, widely inherited from the STM32 MCU family
-- Comprehensive security support
-
-More details:
-
-- Cortex-A7 core running up to @900MHz
-- FMC controller to connect SDRAM, NOR and NAND memories
-- QSPI
-- SD/MMC/SDIO support
-- 2*Ethernet controller
-- CAN
-- ADC/DAC
-- USB EHCI/OHCI controllers
-- USB OTG
-- I2C, SPI, CAN busses support
-- Several general purpose timers
-- Serial Audio interface
-- LCD controller
-- DCMIPP
-- SPDIFRX
-- DFSDM
-
-:Authors:
-
-- Alexandre Torgue <alexandre.torgue@foss.st.com>
diff --git a/Documentation/arm/stm32/stm32mp151-overview.rst b/Documentation/arm/stm32/stm32mp151-overview.rst
deleted file mode 100644
index f42a2ac309c07..0000000000000
--- a/Documentation/arm/stm32/stm32mp151-overview.rst
+++ /dev/null
@@ -1,36 +0,0 @@
-===================
-STM32MP151 Overview
-===================
-
-Introduction
-------------
-
-The STM32MP151 is a Cortex-A MPU aimed at various applications.
-It features:
-
-- Single Cortex-A7 application core
-- Standard memories interface support
-- Standard connectivity, widely inherited from the STM32 MCU family
-- Comprehensive security support
-
-More details:
-
-- Cortex-A7 core running up to @800MHz
-- FMC controller to connect SDRAM, NOR and NAND memories
-- QSPI
-- SD/MMC/SDIO support
-- Ethernet controller
-- ADC/DAC
-- USB EHCI/OHCI controllers
-- USB OTG
-- I2C, SPI busses support
-- Several general purpose timers
-- Serial Audio interface
-- LCD-TFT controller
-- DCMIPP
-- SPDIFRX
-- DFSDM
-
-:Authors:
-
-- Roan van Dijk <roan@protonic.nl>
diff --git a/Documentation/arm/stm32/stm32mp157-overview.rst b/Documentation/arm/stm32/stm32mp157-overview.rst
deleted file mode 100644
index f62fdc8e7d8de..0000000000000
--- a/Documentation/arm/stm32/stm32mp157-overview.rst
+++ /dev/null
@@ -1,20 +0,0 @@
-===================
-STM32MP157 Overview
-===================
-
-Introduction
-------------
-
-The STM32MP157 is a Cortex-A MPU aimed at various applications.
-It features:
-
-- Dual core Cortex-A7 application core
-- 2D/3D image composition with GPU
-- Standard memories interface support
-- Standard connectivity, widely inherited from the STM32 MCU family
-- Comprehensive security support
-
-:Authors:
-
-- Ludovic Barre <ludovic.barre@st.com>
-- Gerald Baeza <gerald.baeza@st.com>
diff --git a/Documentation/arm/sunxi.rst b/Documentation/arm/sunxi.rst
deleted file mode 100644
index b85d1e2f2d473..0000000000000
--- a/Documentation/arm/sunxi.rst
+++ /dev/null
@@ -1,170 +0,0 @@
-==================
-ARM Allwinner SoCs
-==================
-
-This document lists all the ARM Allwinner SoCs that are currently
-supported in mainline by the Linux kernel. This document will also
-provide links to documentation and/or datasheet for these SoCs.
-
-SunXi family
-------------
-  Linux kernel mach directory: arch/arm/mach-sunxi
-
-  Flavors:
-
-    * ARM926 based SoCs
-      - Allwinner F20 (sun3i)
-
-        * Not Supported
-
-    * ARM Cortex-A8 based SoCs
-      - Allwinner A10 (sun4i)
-
-        * Datasheet
-
-	  http://dl.linux-sunxi.org/A10/A10%20Datasheet%20-%20v1.21%20%282012-04-06%29.pdf
-	* User Manual
-
-	  http://dl.linux-sunxi.org/A10/A10%20User%20Manual%20-%20v1.20%20%282012-04-09%2c%20DECRYPTED%29.pdf
-
-      - Allwinner A10s (sun5i)
-
-        * Datasheet
-
-          http://dl.linux-sunxi.org/A10s/A10s%20Datasheet%20-%20v1.20%20%282012-03-27%29.pdf
-
-      - Allwinner A13 / R8 (sun5i)
-
-        * Datasheet
-
-	  http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
-        * User Manual
-
-          http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-01-08%29.pdf
-
-      - Next Thing Co GR8 (sun5i)
-
-    * Single ARM Cortex-A7 based SoCs
-      - Allwinner V3s (sun8i)
-
-        * Datasheet
-
-          http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
-
-    * Dual ARM Cortex-A7 based SoCs
-      - Allwinner A20 (sun7i)
-
-        * User Manual
-
-          http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
-
-      - Allwinner A23 (sun8i)
-
-        * Datasheet
-
-          http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf
-
-        * User Manual
-
-          http://dl.linux-sunxi.org/A23/A23%20User%20Manual%20V1.0%2020130830.pdf
-
-    * Quad ARM Cortex-A7 based SoCs
-      - Allwinner A31 (sun6i)
-
-        * Datasheet
-
-          http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20datasheet%20V1.3%2020131106.pdf
-
-        * User Manual
-
-          http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20user%20manual%20V1.1%2020130630.pdf
-
-      - Allwinner A31s (sun6i)
-
-        * Datasheet
-
-          http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20datasheet%20V1.3%2020131106.pdf
-
-        * User Manual
-
-          http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf
-
-      - Allwinner A33 (sun8i)
-
-        * Datasheet
-
-          http://dl.linux-sunxi.org/A33/A33%20Datasheet%20release%201.1.pdf
-
-        * User Manual
-
-          http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
-
-      - Allwinner H2+ (sun8i)
-
-        * No document available now, but is known to be working properly with
-          H3 drivers and memory map.
-
-      - Allwinner H3 (sun8i)
-
-        * Datasheet
-
-          https://linux-sunxi.org/images/4/4b/Allwinner_H3_Datasheet_V1.2.pdf
-
-      - Allwinner R40 (sun8i)
-
-        * Datasheet
-
-          https://github.com/tinalinux/docs/raw/r40-v1.y/R40_Datasheet_V1.0.pdf
-
-        * User Manual
-
-          https://github.com/tinalinux/docs/raw/r40-v1.y/Allwinner_R40_User_Manual_V1.0.pdf
-
-    * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
-      - Allwinner A80
-
-        * Datasheet
-
-	  http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf
-
-    * Octa ARM Cortex-A7 based SoCs
-      - Allwinner A83T
-
-        * Datasheet
-
-          https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_Datasheet_v1.3_20150510.pdf
-
-        * User Manual
-
-          https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_User_Manual_v1.5.1_20150513.pdf
-
-    * Quad ARM Cortex-A53 based SoCs
-      - Allwinner A64
-
-        * Datasheet
-
-          http://dl.linux-sunxi.org/A64/A64_Datasheet_V1.1.pdf
-
-        * User Manual
-
-          http://dl.linux-sunxi.org/A64/Allwinner%20A64%20User%20Manual%20v1.0.pdf
-
-      - Allwinner H6
-
-	* Datasheet
-
-	  https://linux-sunxi.org/images/5/5c/Allwinner_H6_V200_Datasheet_V1.1.pdf
-
-	* User Manual
-
-	  https://linux-sunxi.org/images/4/46/Allwinner_H6_V200_User_Manual_V1.1.pdf
-
-      - Allwinner H616
-
-	* Datasheet
-
-	  https://linux-sunxi.org/images/b/b9/H616_Datasheet_V1.0_cleaned.pdf
-
-	* User Manual
-
-	  https://linux-sunxi.org/images/2/24/H616_User_Manual_V1.0_cleaned.pdf
diff --git a/Documentation/arm/sunxi/clocks.rst b/Documentation/arm/sunxi/clocks.rst
deleted file mode 100644
index 23bd03f3e21f4..0000000000000
--- a/Documentation/arm/sunxi/clocks.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-=======================================================
-Frequently asked questions about the sunxi clock system
-=======================================================
-
-This document contains useful bits of information that people tend to ask
-about the sunxi clock system, as well as accompanying ASCII art when adequate.
-
-Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
-   system?
-
-A: The 24MHz oscillator allows gating to save power. Indeed, if gated
-   carelessly the system would stop functioning, but with the right
-   steps, one can gate it and keep the system running. Consider this
-   simplified suspend example:
-
-   While the system is operational, you would see something like::
-
-      24MHz         32kHz
-       |
-      PLL1
-       \
-        \_ CPU Mux
-             |
-           [CPU]
-
-   When you are about to suspend, you switch the CPU Mux to the 32kHz
-   oscillator::
-
-      24Mhz         32kHz
-       |              |
-      PLL1            |
-                     /
-           CPU Mux _/
-             |
-           [CPU]
-
-    Finally you can gate the main oscillator::
-
-                    32kHz
-                      |
-                      |
-                     /
-           CPU Mux _/
-             |
-           [CPU]
-
-Q: Were can I learn more about the sunxi clocks?
-
-A: The linux-sunxi wiki contains a page documenting the clock registers,
-   you can find it at
-
-        http://linux-sunxi.org/A10/CCM
-
-   The authoritative source for information at this time is the ccmu driver
-   released by Allwinner, you can find it at
-
-        https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu
diff --git a/Documentation/arm/swp_emulation.rst b/Documentation/arm/swp_emulation.rst
deleted file mode 100644
index 6a608a9c37158..0000000000000
--- a/Documentation/arm/swp_emulation.rst
+++ /dev/null
@@ -1,27 +0,0 @@
-Software emulation of deprecated SWP instruction (CONFIG_SWP_EMULATE)
----------------------------------------------------------------------
-
-ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommeds
-moving to the load-locked/store-conditional instructions LDREX and STREX.
-
-ARMv7 multiprocessing extensions introduce the ability to disable these
-instructions, triggering an undefined instruction exception when executed.
-Trapped instructions are emulated using an LDREX/STREX or LDREXB/STREXB
-sequence. If a memory access fault (an abort) occurs, a segmentation fault is
-signalled to the triggering process.
-
-/proc/cpu/swp_emulation holds some statistics/information, including the PID of
-the last process to trigger the emulation to be invocated. For example::
-
-  Emulated SWP:		12
-  Emulated SWPB:		0
-  Aborted SWP{B}:		1
-  Last process:		314
-
-
-NOTE:
-  when accessing uncached shared regions, LDREX/STREX rely on an external
-  transaction monitoring block called a global monitor to maintain update
-  atomicity. If your system does not implement a global monitor, this option can
-  cause programs that perform SWP operations to uncached memory to deadlock, as
-  the STREX operation will always fail.
diff --git a/Documentation/arm/tcm.rst b/Documentation/arm/tcm.rst
deleted file mode 100644
index 1dc6c39220f98..0000000000000
--- a/Documentation/arm/tcm.rst
+++ /dev/null
@@ -1,161 +0,0 @@
-==================================================
-ARM TCM (Tightly-Coupled Memory) handling in Linux
-==================================================
-
-Written by Linus Walleij <linus.walleij@stericsson.com>
-
-Some ARM SoCs have a so-called TCM (Tightly-Coupled Memory).
-This is usually just a few (4-64) KiB of RAM inside the ARM
-processor.
-
-Due to being embedded inside the CPU, the TCM has a
-Harvard-architecture, so there is an ITCM (instruction TCM)
-and a DTCM (data TCM). The DTCM can not contain any
-instructions, but the ITCM can actually contain data.
-The size of DTCM or ITCM is minimum 4KiB so the typical
-minimum configuration is 4KiB ITCM and 4KiB DTCM.
-
-ARM CPUs have special registers to read out status, physical
-location and size of TCM memories. arch/arm/include/asm/cputype.h
-defines a CPUID_TCM register that you can read out from the
-system control coprocessor. Documentation from ARM can be found
-at http://infocenter.arm.com, search for "TCM Status Register"
-to see documents for all CPUs. Reading this register you can
-determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present
-in the machine.
-
-There is further a TCM region register (search for "TCM Region
-Registers" at the ARM site) that can report and modify the location
-size of TCM memories at runtime. This is used to read out and modify
-TCM location and size. Notice that this is not a MMU table: you
-actually move the physical location of the TCM around. At the
-place you put it, it will mask any underlying RAM from the
-CPU so it is usually wise not to overlap any physical RAM with
-the TCM.
-
-The TCM memory can then be remapped to another address again using
-the MMU, but notice that the TCM is often used in situations where
-the MMU is turned off. To avoid confusion the current Linux
-implementation will map the TCM 1 to 1 from physical to virtual
-memory in the location specified by the kernel. Currently Linux
-will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and
-on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM.
-
-Newer versions of the region registers also support dividing these
-TCMs in two separate banks, so for example an 8KiB ITCM is divided
-into two 4KiB banks with its own control registers. The idea is to
-be able to lock and hide one of the banks for use by the secure
-world (TrustZone).
-
-TCM is used for a few things:
-
-- FIQ and other interrupt handlers that need deterministic
-  timing and cannot wait for cache misses.
-
-- Idle loops where all external RAM is set to self-refresh
-  retention mode, so only on-chip RAM is accessible by
-  the CPU and then we hang inside ITCM waiting for an
-  interrupt.
-
-- Other operations which implies shutting off or reconfiguring
-  the external RAM controller.
-
-There is an interface for using TCM on the ARM architecture
-in <asm/tcm.h>. Using this interface it is possible to:
-
-- Define the physical address and size of ITCM and DTCM.
-
-- Tag functions to be compiled into ITCM.
-
-- Tag data and constants to be allocated to DTCM and ITCM.
-
-- Have the remaining TCM RAM added to a special
-  allocation pool with gen_pool_create() and gen_pool_add()
-  and provice tcm_alloc() and tcm_free() for this
-  memory. Such a heap is great for things like saving
-  device state when shutting off device power domains.
-
-A machine that has TCM memory shall select HAVE_TCM from
-arch/arm/Kconfig for itself. Code that needs to use TCM shall
-#include <asm/tcm.h>
-
-Functions to go into itcm can be tagged like this:
-int __tcmfunc foo(int bar);
-
-Since these are marked to become long_calls and you may want
-to have functions called locally inside the TCM without
-wasting space, there is also the __tcmlocalfunc prefix that
-will make the call relative.
-
-Variables to go into dtcm can be tagged like this::
-
-  int __tcmdata foo;
-
-Constants can be tagged like this::
-
-  int __tcmconst foo;
-
-To put assembler into TCM just use::
-
-  .section ".tcm.text" or .section ".tcm.data"
-
-respectively.
-
-Example code::
-
-  #include <asm/tcm.h>
-
-  /* Uninitialized data */
-  static u32 __tcmdata tcmvar;
-  /* Initialized data */
-  static u32 __tcmdata tcmassigned = 0x2BADBABEU;
-  /* Constant */
-  static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
-
-  static void __tcmlocalfunc tcm_to_tcm(void)
-  {
-	int i;
-	for (i = 0; i < 100; i++)
-		tcmvar ++;
-  }
-
-  static void __tcmfunc hello_tcm(void)
-  {
-	/* Some abstract code that runs in ITCM */
-	int i;
-	for (i = 0; i < 100; i++) {
-		tcmvar ++;
-	}
-	tcm_to_tcm();
-  }
-
-  static void __init test_tcm(void)
-  {
-	u32 *tcmem;
-	int i;
-
-	hello_tcm();
-	printk("Hello TCM executed from ITCM RAM\n");
-
-	printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar);
-	tcmvar = 0xDEADBEEFU;
-	printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar);
-
-	printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned);
-
-	printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst);
-
-	/* Allocate some TCM memory from the pool */
-	tcmem = tcm_alloc(20);
-	if (tcmem) {
-		printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem);
-		tcmem[0] = 0xDEADBEEFU;
-		tcmem[1] = 0x2BADBABEU;
-		tcmem[2] = 0xCAFEBABEU;
-		tcmem[3] = 0xDEADBEEFU;
-		tcmem[4] = 0x2BADBABEU;
-		for (i = 0; i < 5; i++)
-			printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
-		tcm_free(tcmem, 20);
-	}
-  }
diff --git a/Documentation/arm/uefi.rst b/Documentation/arm/uefi.rst
deleted file mode 100644
index baebe688a0064..0000000000000
--- a/Documentation/arm/uefi.rst
+++ /dev/null
@@ -1,70 +0,0 @@
-================================================
-The Unified Extensible Firmware Interface (UEFI)
-================================================
-
-UEFI, the Unified Extensible Firmware Interface, is a specification
-governing the behaviours of compatible firmware interfaces. It is
-maintained by the UEFI Forum - http://www.uefi.org/.
-
-UEFI is an evolution of its predecessor 'EFI', so the terms EFI and
-UEFI are used somewhat interchangeably in this document and associated
-source code. As a rule, anything new uses 'UEFI', whereas 'EFI' refers
-to legacy code or specifications.
-
-UEFI support in Linux
-=====================
-Booting on a platform with firmware compliant with the UEFI specification
-makes it possible for the kernel to support additional features:
-
-- UEFI Runtime Services
-- Retrieving various configuration information through the standardised
-  interface of UEFI configuration tables. (ACPI, SMBIOS, ...)
-
-For actually enabling [U]EFI support, enable:
-
-- CONFIG_EFI=y
-- CONFIG_EFIVAR_FS=y or m
-
-The implementation depends on receiving information about the UEFI environment
-in a Flattened Device Tree (FDT) - so is only available with CONFIG_OF.
-
-UEFI stub
-=========
-The "stub" is a feature that extends the Image/zImage into a valid UEFI
-PE/COFF executable, including a loader application that makes it possible to
-load the kernel directly from the UEFI shell, boot menu, or one of the
-lightweight bootloaders like Gummiboot or rEFInd.
-
-The kernel image built with stub support remains a valid kernel image for
-booting in non-UEFI environments.
-
-UEFI kernel support on ARM
-==========================
-UEFI kernel support on the ARM architectures (arm and arm64) is only available
-when boot is performed through the stub.
-
-When booting in UEFI mode, the stub deletes any memory nodes from a provided DT.
-Instead, the kernel reads the UEFI memory map.
-
-The stub populates the FDT /chosen node with (and the kernel scans for) the
-following parameters:
-
-==========================  ======   ===========================================
-Name                        Size     Description
-==========================  ======   ===========================================
-linux,uefi-system-table     64-bit   Physical address of the UEFI System Table.
-
-linux,uefi-mmap-start       64-bit   Physical address of the UEFI memory map,
-                                     populated by the UEFI GetMemoryMap() call.
-
-linux,uefi-mmap-size        32-bit   Size in bytes of the UEFI memory map
-                                     pointed to in previous entry.
-
-linux,uefi-mmap-desc-size   32-bit   Size in bytes of each entry in the UEFI
-                                     memory map.
-
-linux,uefi-mmap-desc-ver    32-bit   Version of the mmap descriptor format.
-
-kaslr-seed                  64-bit   Entropy used to randomize the kernel image
-                                     base address location.
-==========================  ======   ===========================================
diff --git a/Documentation/arm/vfp/release-notes.rst b/Documentation/arm/vfp/release-notes.rst
deleted file mode 100644
index c6b04937cee3a..0000000000000
--- a/Documentation/arm/vfp/release-notes.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-===============================================
-Release notes for Linux Kernel VFP support code
-===============================================
-
-Date: 	20 May 2004
-
-Author:	Russell King
-
-This is the first release of the Linux Kernel VFP support code.  It
-provides support for the exceptions bounced from VFP hardware found
-on ARM926EJ-S.
-
-This release has been validated against the SoftFloat-2b library by
-John R. Hauser using the TestFloat-2a test suite.  Details of this
-library and test suite can be found at:
-
-   http://www.jhauser.us/arithmetic/SoftFloat.html
-
-The operations which have been tested with this package are:
-
- - fdiv
- - fsub
- - fadd
- - fmul
- - fcmp
- - fcmpe
- - fcvtd
- - fcvts
- - fsito
- - ftosi
- - fsqrt
-
-All the above pass softfloat tests with the following exceptions:
-
-- fadd/fsub shows some differences in the handling of +0 / -0 results
-  when input operands differ in signs.
-- the handling of underflow exceptions is slightly different.  If a
-  result underflows before rounding, but becomes a normalised number
-  after rounding, we do not signal an underflow exception.
-
-Other operations which have been tested by basic assembly-only tests
-are:
-
- - fcpy
- - fabs
- - fneg
- - ftoui
- - ftosiz
- - ftouiz
-
-The combination operations have not been tested:
-
- - fmac
- - fnmac
- - fmsc
- - fnmsc
- - fnmul
diff --git a/Documentation/arm/vlocks.rst b/Documentation/arm/vlocks.rst
deleted file mode 100644
index a40a1742110bc..0000000000000
--- a/Documentation/arm/vlocks.rst
+++ /dev/null
@@ -1,212 +0,0 @@
-======================================
-vlocks for Bare-Metal Mutual Exclusion
-======================================
-
-Voting Locks, or "vlocks" provide a simple low-level mutual exclusion
-mechanism, with reasonable but minimal requirements on the memory
-system.
-
-These are intended to be used to coordinate critical activity among CPUs
-which are otherwise non-coherent, in situations where the hardware
-provides no other mechanism to support this and ordinary spinlocks
-cannot be used.
-
-
-vlocks make use of the atomicity provided by the memory system for
-writes to a single memory location.  To arbitrate, every CPU "votes for
-itself", by storing a unique number to a common memory location.  The
-final value seen in that memory location when all the votes have been
-cast identifies the winner.
-
-In order to make sure that the election produces an unambiguous result
-in finite time, a CPU will only enter the election in the first place if
-no winner has been chosen and the election does not appear to have
-started yet.
-
-
-Algorithm
----------
-
-The easiest way to explain the vlocks algorithm is with some pseudo-code::
-
-
-	int currently_voting[NR_CPUS] = { 0, };
-	int last_vote = -1; /* no votes yet */
-
-	bool vlock_trylock(int this_cpu)
-	{
-		/* signal our desire to vote */
-		currently_voting[this_cpu] = 1;
-		if (last_vote != -1) {
-			/* someone already volunteered himself */
-			currently_voting[this_cpu] = 0;
-			return false; /* not ourself */
-		}
-
-		/* let's suggest ourself */
-		last_vote = this_cpu;
-		currently_voting[this_cpu] = 0;
-
-		/* then wait until everyone else is done voting */
-		for_each_cpu(i) {
-			while (currently_voting[i] != 0)
-				/* wait */;
-		}
-
-		/* result */
-		if (last_vote == this_cpu)
-			return true; /* we won */
-		return false;
-	}
-
-	bool vlock_unlock(void)
-	{
-		last_vote = -1;
-	}
-
-
-The currently_voting[] array provides a way for the CPUs to determine
-whether an election is in progress, and plays a role analogous to the
-"entering" array in Lamport's bakery algorithm [1].
-
-However, once the election has started, the underlying memory system
-atomicity is used to pick the winner.  This avoids the need for a static
-priority rule to act as a tie-breaker, or any counters which could
-overflow.
-
-As long as the last_vote variable is globally visible to all CPUs, it
-will contain only one value that won't change once every CPU has cleared
-its currently_voting flag.
-
-
-Features and limitations
-------------------------
-
- * vlocks are not intended to be fair.  In the contended case, it is the
-   _last_ CPU which attempts to get the lock which will be most likely
-   to win.
-
-   vlocks are therefore best suited to situations where it is necessary
-   to pick a unique winner, but it does not matter which CPU actually
-   wins.
-
- * Like other similar mechanisms, vlocks will not scale well to a large
-   number of CPUs.
-
-   vlocks can be cascaded in a voting hierarchy to permit better scaling
-   if necessary, as in the following hypothetical example for 4096 CPUs::
-
-	/* first level: local election */
-	my_town = towns[(this_cpu >> 4) & 0xf];
-	I_won = vlock_trylock(my_town, this_cpu & 0xf);
-	if (I_won) {
-		/* we won the town election, let's go for the state */
-		my_state = states[(this_cpu >> 8) & 0xf];
-		I_won = vlock_lock(my_state, this_cpu & 0xf));
-		if (I_won) {
-			/* and so on */
-			I_won = vlock_lock(the_whole_country, this_cpu & 0xf];
-			if (I_won) {
-				/* ... */
-			}
-			vlock_unlock(the_whole_country);
-		}
-		vlock_unlock(my_state);
-	}
-	vlock_unlock(my_town);
-
-
-ARM implementation
-------------------
-
-The current ARM implementation [2] contains some optimisations beyond
-the basic algorithm:
-
- * By packing the members of the currently_voting array close together,
-   we can read the whole array in one transaction (providing the number
-   of CPUs potentially contending the lock is small enough).  This
-   reduces the number of round-trips required to external memory.
-
-   In the ARM implementation, this means that we can use a single load
-   and comparison::
-
-	LDR	Rt, [Rn]
-	CMP	Rt, #0
-
-   ...in place of code equivalent to::
-
-	LDRB	Rt, [Rn]
-	CMP	Rt, #0
-	LDRBEQ	Rt, [Rn, #1]
-	CMPEQ	Rt, #0
-	LDRBEQ	Rt, [Rn, #2]
-	CMPEQ	Rt, #0
-	LDRBEQ	Rt, [Rn, #3]
-	CMPEQ	Rt, #0
-
-   This cuts down on the fast-path latency, as well as potentially
-   reducing bus contention in contended cases.
-
-   The optimisation relies on the fact that the ARM memory system
-   guarantees coherency between overlapping memory accesses of
-   different sizes, similarly to many other architectures.  Note that
-   we do not care which element of currently_voting appears in which
-   bits of Rt, so there is no need to worry about endianness in this
-   optimisation.
-
-   If there are too many CPUs to read the currently_voting array in
-   one transaction then multiple transations are still required.  The
-   implementation uses a simple loop of word-sized loads for this
-   case.  The number of transactions is still fewer than would be
-   required if bytes were loaded individually.
-
-
-   In principle, we could aggregate further by using LDRD or LDM, but
-   to keep the code simple this was not attempted in the initial
-   implementation.
-
-
- * vlocks are currently only used to coordinate between CPUs which are
-   unable to enable their caches yet.  This means that the
-   implementation removes many of the barriers which would be required
-   when executing the algorithm in cached memory.
-
-   packing of the currently_voting array does not work with cached
-   memory unless all CPUs contending the lock are cache-coherent, due
-   to cache writebacks from one CPU clobbering values written by other
-   CPUs.  (Though if all the CPUs are cache-coherent, you should be
-   probably be using proper spinlocks instead anyway).
-
-
- * The "no votes yet" value used for the last_vote variable is 0 (not
-   -1 as in the pseudocode).  This allows statically-allocated vlocks
-   to be implicitly initialised to an unlocked state simply by putting
-   them in .bss.
-
-   An offset is added to each CPU's ID for the purpose of setting this
-   variable, so that no CPU uses the value 0 for its ID.
-
-
-Colophon
---------
-
-Originally created and documented by Dave Martin for Linaro Limited, for
-use in ARM-based big.LITTLE platforms, with review and input gratefully
-received from Nicolas Pitre and Achin Gupta.  Thanks to Nicolas for
-grabbing most of this text out of the relevant mail thread and writing
-up the pseudocode.
-
-Copyright (C) 2012-2013  Linaro Limited
-Distributed under the terms of Version 2 of the GNU General Public
-License, as defined in linux/COPYING.
-
-
-References
-----------
-
-[1] Lamport, L. "A New Solution of Dijkstra's Concurrent Programming
-    Problem", Communications of the ACM 17, 8 (August 1974), 453-455.
-
-    https://en.wikipedia.org/wiki/Lamport%27s_bakery_algorithm
-
-[2] linux/arch/arm/common/vlock.S, www.kernel.org.
diff --git a/Documentation/arm64/acpi_object_usage.rst b/Documentation/arm64/acpi_object_usage.rst
deleted file mode 100644
index 484ef9676653e..0000000000000
--- a/Documentation/arm64/acpi_object_usage.rst
+++ /dev/null
@@ -1,738 +0,0 @@
-===========
-ACPI Tables
-===========
-
-The expectations of individual ACPI tables are discussed in the list that
-follows.
-
-If a section number is used, it refers to a section number in the ACPI
-specification where the object is defined.  If "Signature Reserved" is used,
-the table signature (the first four bytes of the table) is the only portion
-of the table recognized by the specification, and the actual table is defined
-outside of the UEFI Forum (see Section 5.2.6 of the specification).
-
-For ACPI on arm64, tables also fall into the following categories:
-
-       -  Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT
-
-       -  Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT
-
-       -  Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IBFT,
-          IORT, MCHI, MPST, MSCT, NFIT, PMTT, RASF, SBST, SLIT, SPMI, SRAT,
-          STAO, TCPA, TPM2, UEFI, XENV
-
-       -  Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IVRS, LPIT, MSDM, OEMx,
-          PSDT, RSDT, SLIC, WAET, WDAT, WDRT, WPBT
-
-====== ========================================================================
-Table  Usage for ARMv8 Linux
-====== ========================================================================
-BERT   Section 18.3 (signature == "BERT")
-
-       **Boot Error Record Table**
-
-       Must be supplied if RAS support is provided by the platform.  It
-       is recommended this table be supplied.
-
-BOOT   Signature Reserved (signature == "BOOT")
-
-       **simple BOOT flag table**
-
-       Microsoft only table, will not be supported.
-
-BGRT   Section 5.2.22 (signature == "BGRT")
-
-       **Boot Graphics Resource Table**
-
-       Optional, not currently supported, with no real use-case for an
-       ARM server.
-
-CPEP   Section 5.2.18 (signature == "CPEP")
-
-       **Corrected Platform Error Polling table**
-
-       Optional, not currently supported, and not recommended until such
-       time as ARM-compatible hardware is available, and the specification
-       suitably modified.
-
-CSRT   Signature Reserved (signature == "CSRT")
-
-       **Core System Resources Table**
-
-       Optional, not currently supported.
-
-DBG2   Signature Reserved (signature == "DBG2")
-
-       **DeBuG port table 2**
-
-       License has changed and should be usable.  Optional if used instead
-       of earlycon=<device> on the command line.
-
-DBGP   Signature Reserved (signature == "DBGP")
-
-       **DeBuG Port table**
-
-       Microsoft only table, will not be supported.
-
-DSDT   Section 5.2.11.1 (signature == "DSDT")
-
-       **Differentiated System Description Table**
-
-       A DSDT is required; see also SSDT.
-
-       ACPI tables contain only one DSDT but can contain one or more SSDTs,
-       which are optional.  Each SSDT can only add to the ACPI namespace,
-       but cannot modify or replace anything in the DSDT.
-
-DMAR   Signature Reserved (signature == "DMAR")
-
-       **DMA Remapping table**
-
-       x86 only table, will not be supported.
-
-DRTM   Signature Reserved (signature == "DRTM")
-
-       **Dynamic Root of Trust for Measurement table**
-
-       Optional, not currently supported.
-
-ECDT   Section 5.2.16 (signature == "ECDT")
-
-       **Embedded Controller Description Table**
-
-       Optional, not currently supported, but could be used on ARM if and
-       only if one uses the GPE_BIT field to represent an IRQ number, since
-       there are no GPE blocks defined in hardware reduced mode.  This would
-       need to be modified in the ACPI specification.
-
-EINJ   Section 18.6 (signature == "EINJ")
-
-       **Error Injection table**
-
-       This table is very useful for testing platform response to error
-       conditions; it allows one to inject an error into the system as
-       if it had actually occurred.  However, this table should not be
-       shipped with a production system; it should be dynamically loaded
-       and executed with the ACPICA tools only during testing.
-
-ERST   Section 18.5 (signature == "ERST")
-
-       **Error Record Serialization Table**
-
-       On a platform supports RAS, this table must be supplied if it is not
-       UEFI-based; if it is UEFI-based, this table may be supplied. When this
-       table is not present, UEFI run time service will be utilized to save
-       and retrieve hardware error information to and from a persistent store.
-
-ETDT   Signature Reserved (signature == "ETDT")
-
-       **Event Timer Description Table**
-
-       Obsolete table, will not be supported.
-
-FACS   Section 5.2.10 (signature == "FACS")
-
-       **Firmware ACPI Control Structure**
-
-       It is unlikely that this table will be terribly useful.  If it is
-       provided, the Global Lock will NOT be used since it is not part of
-       the hardware reduced profile, and only 64-bit address fields will
-       be considered valid.
-
-FADT   Section 5.2.9 (signature == "FACP")
-
-       **Fixed ACPI Description Table**
-       Required for arm64.
-
-
-       The HW_REDUCED_ACPI flag must be set.  All of the fields that are
-       to be ignored when HW_REDUCED_ACPI is set are expected to be set to
-       zero.
-
-       If an FACS table is provided, the X_FIRMWARE_CTRL field is to be
-       used, not FIRMWARE_CTRL.
-
-       If PSCI is used (as is recommended), make sure that ARM_BOOT_ARCH is
-       filled in properly - that the PSCI_COMPLIANT flag is set and that
-       PSCI_USE_HVC is set or unset as needed (see table 5-37).
-
-       For the DSDT that is also required, the X_DSDT field is to be used,
-       not the DSDT field.
-
-FPDT   Section 5.2.23 (signature == "FPDT")
-
-       **Firmware Performance Data Table**
-
-       Optional, useful for boot performance profiling.
-
-GTDT   Section 5.2.24 (signature == "GTDT")
-
-       **Generic Timer Description Table**
-
-       Required for arm64.
-
-HEST   Section 18.3.2 (signature == "HEST")
-
-       **Hardware Error Source Table**
-
-       ARM-specific error sources have been defined; please use those or the
-       PCI types such as type 6 (AER Root Port), 7 (AER Endpoint), or 8 (AER
-       Bridge), or use type 9 (Generic Hardware Error Source).  Firmware first
-       error handling is possible if and only if Trusted Firmware is being
-       used on arm64.
-
-       Must be supplied if RAS support is provided by the platform.  It
-       is recommended this table be supplied.
-
-HPET   Signature Reserved (signature == "HPET")
-
-       **High Precision Event timer Table**
-
-       x86 only table, will not be supported.
-
-IBFT   Signature Reserved (signature == "IBFT")
-
-       **iSCSI Boot Firmware Table**
-
-       Microsoft defined table, support TBD.
-
-IORT   Signature Reserved (signature == "IORT")
-
-       **Input Output Remapping Table**
-
-       arm64 only table, required in order to describe IO topology, SMMUs,
-       and GIC ITSs, and how those various components are connected together,
-       such as identifying which components are behind which SMMUs/ITSs.
-       This table will only be required on certain SBSA platforms (e.g.,
-       when using GICv3-ITS and an SMMU); on SBSA Level 0 platforms, it
-       remains optional.
-
-IVRS   Signature Reserved (signature == "IVRS")
-
-       **I/O Virtualization Reporting Structure**
-
-       x86_64 (AMD) only table, will not be supported.
-
-LPIT   Signature Reserved (signature == "LPIT")
-
-       **Low Power Idle Table**
-
-       x86 only table as of ACPI 5.1; starting with ACPI 6.0, processor
-       descriptions and power states on ARM platforms should use the DSDT
-       and define processor container devices (_HID ACPI0010, Section 8.4,
-       and more specifically 8.4.3 and 8.4.4).
-
-MADT   Section 5.2.12 (signature == "APIC")
-
-       **Multiple APIC Description Table**
-
-       Required for arm64.  Only the GIC interrupt controller structures
-       should be used (types 0xA - 0xF).
-
-MCFG   Signature Reserved (signature == "MCFG")
-
-       **Memory-mapped ConFiGuration space**
-
-       If the platform supports PCI/PCIe, an MCFG table is required.
-
-MCHI   Signature Reserved (signature == "MCHI")
-
-       **Management Controller Host Interface table**
-
-       Optional, not currently supported.
-
-MPST   Section 5.2.21 (signature == "MPST")
-
-       **Memory Power State Table**
-
-       Optional, not currently supported.
-
-MSCT   Section 5.2.19 (signature == "MSCT")
-
-       **Maximum System Characteristic Table**
-
-       Optional, not currently supported.
-
-MSDM   Signature Reserved (signature == "MSDM")
-
-       **Microsoft Data Management table**
-
-       Microsoft only table, will not be supported.
-
-NFIT   Section 5.2.25 (signature == "NFIT")
-
-       **NVDIMM Firmware Interface Table**
-
-       Optional, not currently supported.
-
-OEMx   Signature of "OEMx" only
-
-       **OEM Specific Tables**
-
-       All tables starting with a signature of "OEM" are reserved for OEM
-       use.  Since these are not meant to be of general use but are limited
-       to very specific end users, they are not recommended for use and are
-       not supported by the kernel for arm64.
-
-PCCT   Section 14.1 (signature == "PCCT)
-
-       **Platform Communications Channel Table**
-
-       Recommend for use on arm64; use of PCC is recommended when using CPPC
-       to control performance and power for platform processors.
-
-PMTT   Section 5.2.21.12 (signature == "PMTT")
-
-       **Platform Memory Topology Table**
-
-       Optional, not currently supported.
-
-PSDT   Section 5.2.11.3 (signature == "PSDT")
-
-       **Persistent System Description Table**
-
-       Obsolete table, will not be supported.
-
-RASF   Section 5.2.20 (signature == "RASF")
-
-       **RAS Feature table**
-
-       Optional, not currently supported.
-
-RSDP   Section 5.2.5 (signature == "RSD PTR")
-
-       **Root System Description PoinTeR**
-
-       Required for arm64.
-
-RSDT   Section 5.2.7 (signature == "RSDT")
-
-       **Root System Description Table**
-
-       Since this table can only provide 32-bit addresses, it is deprecated
-       on arm64, and will not be used.  If provided, it will be ignored.
-
-SBST   Section 5.2.14 (signature == "SBST")
-
-       **Smart Battery Subsystem Table**
-
-       Optional, not currently supported.
-
-SLIC   Signature Reserved (signature == "SLIC")
-
-       **Software LIcensing table**
-
-       Microsoft only table, will not be supported.
-
-SLIT   Section 5.2.17 (signature == "SLIT")
-
-       **System Locality distance Information Table**
-
-       Optional in general, but required for NUMA systems.
-
-SPCR   Signature Reserved (signature == "SPCR")
-
-       **Serial Port Console Redirection table**
-
-       Required for arm64.
-
-SPMI   Signature Reserved (signature == "SPMI")
-
-       **Server Platform Management Interface table**
-
-       Optional, not currently supported.
-
-SRAT   Section 5.2.16 (signature == "SRAT")
-
-       **System Resource Affinity Table**
-
-       Optional, but if used, only the GICC Affinity structures are read.
-       To support arm64 NUMA, this table is required.
-
-SSDT   Section 5.2.11.2 (signature == "SSDT")
-
-       **Secondary System Description Table**
-
-       These tables are a continuation of the DSDT; these are recommended
-       for use with devices that can be added to a running system, but can
-       also serve the purpose of dividing up device descriptions into more
-       manageable pieces.
-
-       An SSDT can only ADD to the ACPI namespace.  It cannot modify or
-       replace existing device descriptions already in the namespace.
-
-       These tables are optional, however.  ACPI tables should contain only
-       one DSDT but can contain many SSDTs.
-
-STAO   Signature Reserved (signature == "STAO")
-
-       **_STA Override table**
-
-       Optional, but only necessary in virtualized environments in order to
-       hide devices from guest OSs.
-
-TCPA   Signature Reserved (signature == "TCPA")
-
-       **Trusted Computing Platform Alliance table**
-
-       Optional, not currently supported, and may need changes to fully
-       interoperate with arm64.
-
-TPM2   Signature Reserved (signature == "TPM2")
-
-       **Trusted Platform Module 2 table**
-
-       Optional, not currently supported, and may need changes to fully
-       interoperate with arm64.
-
-UEFI   Signature Reserved (signature == "UEFI")
-
-       **UEFI ACPI data table**
-
-       Optional, not currently supported.  No known use case for arm64,
-       at present.
-
-WAET   Signature Reserved (signature == "WAET")
-
-       **Windows ACPI Emulated devices Table**
-
-       Microsoft only table, will not be supported.
-
-WDAT   Signature Reserved (signature == "WDAT")
-
-       **Watch Dog Action Table**
-
-       Microsoft only table, will not be supported.
-
-WDRT   Signature Reserved (signature == "WDRT")
-
-       **Watch Dog Resource Table**
-
-       Microsoft only table, will not be supported.
-
-WPBT   Signature Reserved (signature == "WPBT")
-
-       **Windows Platform Binary Table**
-
-       Microsoft only table, will not be supported.
-
-XENV   Signature Reserved (signature == "XENV")
-
-       **Xen project table**
-
-       Optional, used only by Xen at present.
-
-XSDT   Section 5.2.8 (signature == "XSDT")
-
-       **eXtended System Description Table**
-
-       Required for arm64.
-====== ========================================================================
-
-ACPI Objects
-------------
-The expectations on individual ACPI objects that are likely to be used are
-shown in the list that follows; any object not explicitly mentioned below
-should be used as needed for a particular platform or particular subsystem,
-such as power management or PCI.
-
-===== ================ ========================================================
-Name   Section         Usage for ARMv8 Linux
-===== ================ ========================================================
-_CCA   6.2.17          This method must be defined for all bus masters
-                       on arm64 - there are no assumptions made about
-                       whether such devices are cache coherent or not.
-                       The _CCA value is inherited by all descendants of
-                       these devices so it does not need to be repeated.
-                       Without _CCA on arm64, the kernel does not know what
-                       to do about setting up DMA for the device.
-
-                       NB: this method provides default cache coherency
-                       attributes; the presence of an SMMU can be used to
-                       modify that, however.  For example, a master could
-                       default to non-coherent, but be made coherent with
-                       the appropriate SMMU configuration (see Table 17 of
-                       the IORT specification, ARM Document DEN 0049B).
-
-_CID   6.1.2           Use as needed, see also _HID.
-
-_CLS   6.1.3           Use as needed, see also _HID.
-
-_CPC   8.4.7.1         Use as needed, power management specific.  CPPC is
-                       recommended on arm64.
-
-_CRS   6.2.2           Required on arm64.
-
-_CSD   8.4.2.2         Use as needed, used only in conjunction with _CST.
-
-_CST   8.4.2.1         Low power idle states (8.4.4) are recommended instead
-                       of C-states.
-
-_DDN   6.1.4           This field can be used for a device name.  However,
-                       it is meant for DOS device names (e.g., COM1), so be
-                       careful of its use across OSes.
-
-_DSD   6.2.5           To be used with caution.  If this object is used, try
-                       to use it within the constraints already defined by the
-                       Device Properties UUID.  Only in rare circumstances
-                       should it be necessary to create a new _DSD UUID.
-
-                       In either case, submit the _DSD definition along with
-                       any driver patches for discussion, especially when
-                       device properties are used.  A driver will not be
-                       considered complete without a corresponding _DSD
-                       description.  Once approved by kernel maintainers,
-                       the UUID or device properties must then be registered
-                       with the UEFI Forum; this may cause some iteration as
-                       more than one OS will be registering entries.
-
-_DSM   9.1.1           Do not use this method.  It is not standardized, the
-                       return values are not well documented, and it is
-                       currently a frequent source of error.
-
-\_GL   5.7.1           This object is not to be used in hardware reduced
-                       mode, and therefore should not be used on arm64.
-
-_GLK   6.5.7           This object requires a global lock be defined; there
-                       is no global lock on arm64 since it runs in hardware
-                       reduced mode.  Hence, do not use this object on arm64.
-
-\_GPE  5.3.1           This namespace is for x86 use only.  Do not use it
-                       on arm64.
-
-_HID   6.1.5           This is the primary object to use in device probing,
-		       though _CID and _CLS may also be used.
-
-_INI   6.5.1           Not required, but can be useful in setting up devices
-                       when UEFI leaves them in a state that may not be what
-                       the driver expects before it starts probing.
-
-_LPI   8.4.4.3         Recommended for use with processor definitions (_HID
-		       ACPI0010) on arm64.  See also _RDI.
-
-_MLS   6.1.7           Highly recommended for use in internationalization.
-
-_OFF   7.2.2           It is recommended to define this method for any device
-                       that can be turned on or off.
-
-_ON    7.2.3           It is recommended to define this method for any device
-                       that can be turned on or off.
-
-\_OS   5.7.3           This method will return "Linux" by default (this is
-                       the value of the macro ACPI_OS_NAME on Linux).  The
-                       command line parameter acpi_os=<string> can be used
-                       to set it to some other value.
-
-_OSC   6.2.11          This method can be a global method in ACPI (i.e.,
-                       \_SB._OSC), or it may be associated with a specific
-                       device (e.g., \_SB.DEV0._OSC), or both.  When used
-                       as a global method, only capabilities published in
-                       the ACPI specification are allowed.  When used as
-                       a device-specific method, the process described for
-                       using _DSD MUST be used to create an _OSC definition;
-                       out-of-process use of _OSC is not allowed.  That is,
-                       submit the device-specific _OSC usage description as
-                       part of the kernel driver submission, get it approved
-                       by the kernel community, then register it with the
-                       UEFI Forum.
-
-\_OSI  5.7.2           Deprecated on ARM64.  As far as ACPI firmware is
-		       concerned, _OSI is not to be used to determine what
-		       sort of system is being used or what functionality
-		       is provided.  The _OSC method is to be used instead.
-
-_PDC   8.4.1           Deprecated, do not use on arm64.
-
-\_PIC  5.8.1           The method should not be used.  On arm64, the only
-                       interrupt model available is GIC.
-
-\_PR   5.3.1           This namespace is for x86 use only on legacy systems.
-                       Do not use it on arm64.
-
-_PRT   6.2.13          Required as part of the definition of all PCI root
-                       devices.
-
-_PRx   7.3.8-11        Use as needed; power management specific.  If _PR0 is
-                       defined, _PR3 must also be defined.
-
-_PSx   7.3.2-5         Use as needed; power management specific.  If _PS0 is
-                       defined, _PS3 must also be defined.  If clocks or
-                       regulators need adjusting to be consistent with power
-                       usage, change them in these methods.
-
-_RDI   8.4.4.4         Recommended for use with processor definitions (_HID
-		       ACPI0010) on arm64.  This should only be used in
-		       conjunction with _LPI.
-
-\_REV  5.7.4           Always returns the latest version of ACPI supported.
-
-\_SB   5.3.1           Required on arm64; all devices must be defined in this
-                       namespace.
-
-_SLI   6.2.15          Use is recommended when SLIT table is in use.
-
-_STA   6.3.7,          It is recommended to define this method for any device
-       7.2.4           that can be turned on or off.  See also the STAO table
-                       that provides overrides to hide devices in virtualized
-                       environments.
-
-_SRS   6.2.16          Use as needed; see also _PRS.
-
-_STR   6.1.10          Recommended for conveying device names to end users;
-                       this is preferred over using _DDN.
-
-_SUB   6.1.9           Use as needed; _HID or _CID are preferred.
-
-_SUN   6.1.11          Use as needed, but recommended.
-
-_SWS   7.4.3           Use as needed; power management specific; this may
-                       require specification changes for use on arm64.
-
-_UID   6.1.12          Recommended for distinguishing devices of the same
-                       class; define it if at all possible.
-===== ================ ========================================================
-
-
-
-
-ACPI Event Model
-----------------
-Do not use GPE block devices; these are not supported in the hardware reduced
-profile used by arm64.  Since there are no GPE blocks defined for use on ARM
-platforms, ACPI events must be signaled differently.
-
-There are two options: GPIO-signaled interrupts (Section 5.6.5), and
-interrupt-signaled events (Section 5.6.9).  Interrupt-signaled events are a
-new feature in the ACPI 6.1 specification.  Either - or both - can be used
-on a given platform, and which to use may be dependent of limitations in any
-given SoC.  If possible, interrupt-signaled events are recommended.
-
-
-ACPI Processor Control
-----------------------
-Section 8 of the ACPI specification changed significantly in version 6.0.
-Processors should now be defined as Device objects with _HID ACPI0007; do
-not use the deprecated Processor statement in ASL.  All multiprocessor systems
-should also define a hierarchy of processors, done with Processor Container
-Devices (see Section 8.4.3.1, _HID ACPI0010); do not use processor aggregator
-devices (Section 8.5) to describe processor topology.  Section 8.4 of the
-specification describes the semantics of these object definitions and how
-they interrelate.
-
-Most importantly, the processor hierarchy defined also defines the low power
-idle states that are available to the platform, along with the rules for
-determining which processors can be turned on or off and the circumstances
-that control that.  Without this information, the processors will run in
-whatever power state they were left in by UEFI.
-
-Note too, that the processor Device objects defined and the entries in the
-MADT for GICs are expected to be in synchronization.  The _UID of the Device
-object must correspond to processor IDs used in the MADT.
-
-It is recommended that CPPC (8.4.5) be used as the primary model for processor
-performance control on arm64.  C-states and P-states may become available at
-some point in the future, but most current design work appears to favor CPPC.
-
-Further, it is essential that the ARMv8 SoC provide a fully functional
-implementation of PSCI; this will be the only mechanism supported by ACPI
-to control CPU power state.  Booting of secondary CPUs using the ACPI
-parking protocol is possible, but discouraged, since only PSCI is supported
-for ARM servers.
-
-
-ACPI System Address Map Interfaces
-----------------------------------
-In Section 15 of the ACPI specification, several methods are mentioned as
-possible mechanisms for conveying memory resource information to the kernel.
-For arm64, we will only support UEFI for booting with ACPI, hence the UEFI
-GetMemoryMap() boot service is the only mechanism that will be used.
-
-
-ACPI Platform Error Interfaces (APEI)
--------------------------------------
-The APEI tables supported are described above.
-
-APEI requires the equivalent of an SCI and an NMI on ARMv8.  The SCI is used
-to notify the OSPM of errors that have occurred but can be corrected and the
-system can continue correct operation, even if possibly degraded.  The NMI is
-used to indicate fatal errors that cannot be corrected, and require immediate
-attention.
-
-Since there is no direct equivalent of the x86 SCI or NMI, arm64 handles
-these slightly differently.  The SCI is handled as a high priority interrupt;
-given that these are corrected (or correctable) errors being reported, this
-is sufficient.  The NMI is emulated as the highest priority interrupt
-possible.  This implies some caution must be used since there could be
-interrupts at higher privilege levels or even interrupts at the same priority
-as the emulated NMI.  In Linux, this should not be the case but one should
-be aware it could happen.
-
-
-ACPI Objects Not Supported on ARM64
------------------------------------
-While this may change in the future, there are several classes of objects
-that can be defined, but are not currently of general interest to ARM servers.
-Some of these objects have x86 equivalents, and may actually make sense in ARM
-servers.  However, there is either no hardware available at present, or there
-may not even be a non-ARM implementation yet.  Hence, they are not currently
-supported.
-
-The following classes of objects are not supported:
-
-       -  Section 9.2: ambient light sensor devices
-
-       -  Section 9.3: battery devices
-
-       -  Section 9.4: lids (e.g., laptop lids)
-
-       -  Section 9.8.2: IDE controllers
-
-       -  Section 9.9: floppy controllers
-
-       -  Section 9.10: GPE block devices
-
-       -  Section 9.15: PC/AT RTC/CMOS devices
-
-       -  Section 9.16: user presence detection devices
-
-       -  Section 9.17: I/O APIC devices; all GICs must be enumerable via MADT
-
-       -  Section 9.18: time and alarm devices (see 9.15)
-
-       -  Section 10: power source and power meter devices
-
-       -  Section 11: thermal management
-
-       -  Section 12: embedded controllers interface
-
-       -  Section 13: SMBus interfaces
-
-
-This also means that there is no support for the following objects:
-
-====   =========================== ====   ==========
-Name   Section                     Name   Section
-====   =========================== ====   ==========
-_ALC   9.3.4                       _FDM   9.10.3
-_ALI   9.3.2                       _FIX   6.2.7
-_ALP   9.3.6                       _GAI   10.4.5
-_ALR   9.3.5                       _GHL   10.4.7
-_ALT   9.3.3                       _GTM   9.9.2.1.1
-_BCT   10.2.2.10                   _LID   9.5.1
-_BDN   6.5.3                       _PAI   10.4.4
-_BIF   10.2.2.1                    _PCL   10.3.2
-_BIX   10.2.2.1                    _PIF   10.3.3
-_BLT   9.2.3                       _PMC   10.4.1
-_BMA   10.2.2.4                    _PMD   10.4.8
-_BMC   10.2.2.12                   _PMM   10.4.3
-_BMD   10.2.2.11                   _PRL   10.3.4
-_BMS   10.2.2.5                    _PSR   10.3.1
-_BST   10.2.2.6                    _PTP   10.4.2
-_BTH   10.2.2.7                    _SBS   10.1.3
-_BTM   10.2.2.9                    _SHL   10.4.6
-_BTP   10.2.2.8                    _STM   9.9.2.1.1
-_DCK   6.5.2                       _UPD   9.16.1
-_EC    12.12                       _UPP   9.16.2
-_FDE   9.10.1                      _WPC   10.5.2
-_FDI   9.10.2                      _WPP   10.5.3
-====   =========================== ====   ==========
diff --git a/Documentation/arm64/amu.rst b/Documentation/arm64/amu.rst
deleted file mode 100644
index 01f2de2b0450c..0000000000000
--- a/Documentation/arm64/amu.rst
+++ /dev/null
@@ -1,119 +0,0 @@
-.. _amu_index:
-
-=======================================================
-Activity Monitors Unit (AMU) extension in AArch64 Linux
-=======================================================
-
-Author: Ionela Voinescu <ionela.voinescu@arm.com>
-
-Date: 2019-09-10
-
-This document briefly describes the provision of Activity Monitors Unit
-support in AArch64 Linux.
-
-
-Architecture overview
----------------------
-
-The activity monitors extension is an optional extension introduced by the
-ARMv8.4 CPU architecture.
-
-The activity monitors unit, implemented in each CPU, provides performance
-counters intended for system management use. The AMU extension provides a
-system register interface to the counter registers and also supports an
-optional external memory-mapped interface.
-
-Version 1 of the Activity Monitors architecture implements a counter group
-of four fixed and architecturally defined 64-bit event counters.
-
-  - CPU cycle counter: increments at the frequency of the CPU.
-  - Constant counter: increments at the fixed frequency of the system
-    clock.
-  - Instructions retired: increments with every architecturally executed
-    instruction.
-  - Memory stall cycles: counts instruction dispatch stall cycles caused by
-    misses in the last level cache within the clock domain.
-
-When in WFI or WFE these counters do not increment.
-
-The Activity Monitors architecture provides space for up to 16 architected
-event counters. Future versions of the architecture may use this space to
-implement additional architected event counters.
-
-Additionally, version 1 implements a counter group of up to 16 auxiliary
-64-bit event counters.
-
-On cold reset all counters reset to 0.
-
-
-Basic support
--------------
-
-The kernel can safely run a mix of CPUs with and without support for the
-activity monitors extension. Therefore, when CONFIG_ARM64_AMU_EXTN is
-selected we unconditionally enable the capability to allow any late CPU
-(secondary or hotplugged) to detect and use the feature.
-
-When the feature is detected on a CPU, we flag the availability of the
-feature but this does not guarantee the correct functionality of the
-counters, only the presence of the extension.
-
-Firmware (code running at higher exception levels, e.g. arm-tf) support is
-needed to:
-
- - Enable access for lower exception levels (EL2 and EL1) to the AMU
-   registers.
- - Enable the counters. If not enabled these will read as 0.
- - Save/restore the counters before/after the CPU is being put/brought up
-   from the 'off' power state.
-
-When using kernels that have this feature enabled but boot with broken
-firmware the user may experience panics or lockups when accessing the
-counter registers. Even if these symptoms are not observed, the values
-returned by the register reads might not correctly reflect reality. Most
-commonly, the counters will read as 0, indicating that they are not
-enabled.
-
-If proper support is not provided in firmware it's best to disable
-CONFIG_ARM64_AMU_EXTN. To be noted that for security reasons, this does not
-bypass the setting of AMUSERENR_EL0 to trap accesses from EL0 (userspace) to
-EL1 (kernel). Therefore, firmware should still ensure accesses to AMU registers
-are not trapped in EL2/EL3.
-
-The fixed counters of AMUv1 are accessible though the following system
-register definitions:
-
- - SYS_AMEVCNTR0_CORE_EL0
- - SYS_AMEVCNTR0_CONST_EL0
- - SYS_AMEVCNTR0_INST_RET_EL0
- - SYS_AMEVCNTR0_MEM_STALL_EL0
-
-Auxiliary platform specific counters can be accessed using
-SYS_AMEVCNTR1_EL0(n), where n is a value between 0 and 15.
-
-Details can be found in: arch/arm64/include/asm/sysreg.h.
-
-
-Userspace access
-----------------
-
-Currently, access from userspace to the AMU registers is disabled due to:
-
- - Security reasons: they might expose information about code executed in
-   secure mode.
- - Purpose: AMU counters are intended for system management use.
-
-Also, the presence of the feature is not visible to userspace.
-
-
-Virtualization
---------------
-
-Currently, access from userspace (EL0) and kernelspace (EL1) on the KVM
-guest side is disabled due to:
-
- - Security reasons: they might expose information about code executed
-   by other guests or the host.
-
-Any attempt to access the AMU registers will result in an UNDEFINED
-exception being injected into the guest.
diff --git a/Documentation/arm64/arm-acpi.rst b/Documentation/arm64/arm-acpi.rst
deleted file mode 100644
index 47ecb9930ddef..0000000000000
--- a/Documentation/arm64/arm-acpi.rst
+++ /dev/null
@@ -1,528 +0,0 @@
-=====================
-ACPI on ARMv8 Servers
-=====================
-
-ACPI can be used for ARMv8 general purpose servers designed to follow
-the ARM SBSA (Server Base System Architecture) [0] and SBBR (Server
-Base Boot Requirements) [1] specifications.  Please note that the SBBR
-can be retrieved simply by visiting [1], but the SBSA is currently only
-available to those with an ARM login due to ARM IP licensing concerns.
-
-The ARMv8 kernel implements the reduced hardware model of ACPI version
-5.1 or later.  Links to the specification and all external documents
-it refers to are managed by the UEFI Forum.  The specification is
-available at http://www.uefi.org/specifications and documents referenced
-by the specification can be found via http://www.uefi.org/acpi.
-
-If an ARMv8 system does not meet the requirements of the SBSA and SBBR,
-or cannot be described using the mechanisms defined in the required ACPI
-specifications, then ACPI may not be a good fit for the hardware.
-
-While the documents mentioned above set out the requirements for building
-industry-standard ARMv8 servers, they also apply to more than one operating
-system.  The purpose of this document is to describe the interaction between
-ACPI and Linux only, on an ARMv8 system -- that is, what Linux expects of
-ACPI and what ACPI can expect of Linux.
-
-
-Why ACPI on ARM?
-----------------
-Before examining the details of the interface between ACPI and Linux, it is
-useful to understand why ACPI is being used.  Several technologies already
-exist in Linux for describing non-enumerable hardware, after all.  In this
-section we summarize a blog post [2] from Grant Likely that outlines the
-reasoning behind ACPI on ARMv8 servers.  Actually, we snitch a good portion
-of the summary text almost directly, to be honest.
-
-The short form of the rationale for ACPI on ARM is:
-
--  ACPI’s byte code (AML) allows the platform to encode hardware behavior,
-   while DT explicitly does not support this.  For hardware vendors, being
-   able to encode behavior is a key tool used in supporting operating
-   system releases on new hardware.
-
--  ACPI’s OSPM defines a power management model that constrains what the
-   platform is allowed to do into a specific model, while still providing
-   flexibility in hardware design.
-
--  In the enterprise server environment, ACPI has established bindings (such
-   as for RAS) which are currently used in production systems.  DT does not.
-   Such bindings could be defined in DT at some point, but doing so means ARM
-   and x86 would end up using completely different code paths in both firmware
-   and the kernel.
-
--  Choosing a single interface to describe the abstraction between a platform
-   and an OS is important.  Hardware vendors would not be required to implement
-   both DT and ACPI if they want to support multiple operating systems.  And,
-   agreeing on a single interface instead of being fragmented into per OS
-   interfaces makes for better interoperability overall.
-
--  The new ACPI governance process works well and Linux is now at the same
-   table as hardware vendors and other OS vendors.  In fact, there is no
-   longer any reason to feel that ACPI only belongs to Windows or that
-   Linux is in any way secondary to Microsoft in this arena.  The move of
-   ACPI governance into the UEFI forum has significantly opened up the
-   specification development process, and currently, a large portion of the
-   changes being made to ACPI are being driven by Linux.
-
-Key to the use of ACPI is the support model.  For servers in general, the
-responsibility for hardware behaviour cannot solely be the domain of the
-kernel, but rather must be split between the platform and the kernel, in
-order to allow for orderly change over time.  ACPI frees the OS from needing
-to understand all the minute details of the hardware so that the OS doesn’t
-need to be ported to each and every device individually.  It allows the
-hardware vendors to take responsibility for power management behaviour without
-depending on an OS release cycle which is not under their control.
-
-ACPI is also important because hardware and OS vendors have already worked
-out the mechanisms for supporting a general purpose computing ecosystem.  The
-infrastructure is in place, the bindings are in place, and the processes are
-in place.  DT does exactly what Linux needs it to when working with vertically
-integrated devices, but there are no good processes for supporting what the
-server vendors need.  Linux could potentially get there with DT, but doing so
-really just duplicates something that already works.  ACPI already does what
-the hardware vendors need, Microsoft won’t collaborate on DT, and hardware
-vendors would still end up providing two completely separate firmware
-interfaces -- one for Linux and one for Windows.
-
-
-Kernel Compatibility
---------------------
-One of the primary motivations for ACPI is standardization, and using that
-to provide backward compatibility for Linux kernels.  In the server market,
-software and hardware are often used for long periods.  ACPI allows the
-kernel and firmware to agree on a consistent abstraction that can be
-maintained over time, even as hardware or software change.  As long as the
-abstraction is supported, systems can be updated without necessarily having
-to replace the kernel.
-
-When a Linux driver or subsystem is first implemented using ACPI, it by
-definition ends up requiring a specific version of the ACPI specification
--- it's baseline.  ACPI firmware must continue to work, even though it may
-not be optimal, with the earliest kernel version that first provides support
-for that baseline version of ACPI.  There may be a need for additional drivers,
-but adding new functionality (e.g., CPU power management) should not break
-older kernel versions.  Further, ACPI firmware must also work with the most
-recent version of the kernel.
-
-
-Relationship with Device Tree
------------------------------
-ACPI support in drivers and subsystems for ARMv8 should never be mutually
-exclusive with DT support at compile time.
-
-At boot time the kernel will only use one description method depending on
-parameters passed from the boot loader (including kernel bootargs).
-
-Regardless of whether DT or ACPI is used, the kernel must always be capable
-of booting with either scheme (in kernels with both schemes enabled at compile
-time).
-
-
-Booting using ACPI tables
--------------------------
-The only defined method for passing ACPI tables to the kernel on ARMv8
-is via the UEFI system configuration table.  Just so it is explicit, this
-means that ACPI is only supported on platforms that boot via UEFI.
-
-When an ARMv8 system boots, it can either have DT information, ACPI tables,
-or in some very unusual cases, both.  If no command line parameters are used,
-the kernel will try to use DT for device enumeration; if there is no DT
-present, the kernel will try to use ACPI tables, but only if they are present.
-In neither is available, the kernel will not boot.  If acpi=force is used
-on the command line, the kernel will attempt to use ACPI tables first, but
-fall back to DT if there are no ACPI tables present.  The basic idea is that
-the kernel will not fail to boot unless it absolutely has no other choice.
-
-Processing of ACPI tables may be disabled by passing acpi=off on the kernel
-command line; this is the default behavior.
-
-In order for the kernel to load and use ACPI tables, the UEFI implementation
-MUST set the ACPI_20_TABLE_GUID to point to the RSDP table (the table with
-the ACPI signature "RSD PTR ").  If this pointer is incorrect and acpi=force
-is used, the kernel will disable ACPI and try to use DT to boot instead; the
-kernel has, in effect, determined that ACPI tables are not present at that
-point.
-
-If the pointer to the RSDP table is correct, the table will be mapped into
-the kernel by the ACPI core, using the address provided by UEFI.
-
-The ACPI core will then locate and map in all other ACPI tables provided by
-using the addresses in the RSDP table to find the XSDT (eXtended System
-Description Table).  The XSDT in turn provides the addresses to all other
-ACPI tables provided by the system firmware; the ACPI core will then traverse
-this table and map in the tables listed.
-
-The ACPI core will ignore any provided RSDT (Root System Description Table).
-RSDTs have been deprecated and are ignored on arm64 since they only allow
-for 32-bit addresses.
-
-Further, the ACPI core will only use the 64-bit address fields in the FADT
-(Fixed ACPI Description Table).  Any 32-bit address fields in the FADT will
-be ignored on arm64.
-
-Hardware reduced mode (see Section 4.1 of the ACPI 6.1 specification) will
-be enforced by the ACPI core on arm64.  Doing so allows the ACPI core to
-run less complex code since it no longer has to provide support for legacy
-hardware from other architectures.  Any fields that are not to be used for
-hardware reduced mode must be set to zero.
-
-For the ACPI core to operate properly, and in turn provide the information
-the kernel needs to configure devices, it expects to find the following
-tables (all section numbers refer to the ACPI 6.1 specification):
-
-    -  RSDP (Root System Description Pointer), section 5.2.5
-
-    -  XSDT (eXtended System Description Table), section 5.2.8
-
-    -  FADT (Fixed ACPI Description Table), section 5.2.9
-
-    -  DSDT (Differentiated System Description Table), section
-       5.2.11.1
-
-    -  MADT (Multiple APIC Description Table), section 5.2.12
-
-    -  GTDT (Generic Timer Description Table), section 5.2.24
-
-    -  If PCI is supported, the MCFG (Memory mapped ConFiGuration
-       Table), section 5.2.6, specifically Table 5-31.
-
-    -  If booting without a console=<device> kernel parameter is
-       supported, the SPCR (Serial Port Console Redirection table),
-       section 5.2.6, specifically Table 5-31.
-
-    -  If necessary to describe the I/O topology, SMMUs and GIC ITSs,
-       the IORT (Input Output Remapping Table, section 5.2.6, specifically
-       Table 5-31).
-
-    -  If NUMA is supported, the SRAT (System Resource Affinity Table)
-       and SLIT (System Locality distance Information Table), sections
-       5.2.16 and 5.2.17, respectively.
-
-If the above tables are not all present, the kernel may or may not be
-able to boot properly since it may not be able to configure all of the
-devices available.  This list of tables is not meant to be all inclusive;
-in some environments other tables may be needed (e.g., any of the APEI
-tables from section 18) to support specific functionality.
-
-
-ACPI Detection
---------------
-Drivers should determine their probe() type by checking for a null
-value for ACPI_HANDLE, or checking .of_node, or other information in
-the device structure.  This is detailed further in the "Driver
-Recommendations" section.
-
-In non-driver code, if the presence of ACPI needs to be detected at
-run time, then check the value of acpi_disabled. If CONFIG_ACPI is not
-set, acpi_disabled will always be 1.
-
-
-Device Enumeration
-------------------
-Device descriptions in ACPI should use standard recognized ACPI interfaces.
-These may contain less information than is typically provided via a Device
-Tree description for the same device.  This is also one of the reasons that
-ACPI can be useful -- the driver takes into account that it may have less
-detailed information about the device and uses sensible defaults instead.
-If done properly in the driver, the hardware can change and improve over
-time without the driver having to change at all.
-
-Clocks provide an excellent example.  In DT, clocks need to be specified
-and the drivers need to take them into account.  In ACPI, the assumption
-is that UEFI will leave the device in a reasonable default state, including
-any clock settings.  If for some reason the driver needs to change a clock
-value, this can be done in an ACPI method; all the driver needs to do is
-invoke the method and not concern itself with what the method needs to do
-to change the clock.  Changing the hardware can then take place over time
-by changing what the ACPI method does, and not the driver.
-
-In DT, the parameters needed by the driver to set up clocks as in the example
-above are known as "bindings"; in ACPI, these are known as "Device Properties"
-and provided to a driver via the _DSD object.
-
-ACPI tables are described with a formal language called ASL, the ACPI
-Source Language (section 19 of the specification).  This means that there
-are always multiple ways to describe the same thing -- including device
-properties.  For example, device properties could use an ASL construct
-that looks like this: Name(KEY0, "value0").  An ACPI device driver would
-then retrieve the value of the property by evaluating the KEY0 object.
-However, using Name() this way has multiple problems: (1) ACPI limits
-names ("KEY0") to four characters unlike DT; (2) there is no industry
-wide registry that maintains a list of names, minimizing re-use; (3)
-there is also no registry for the definition of property values ("value0"),
-again making re-use difficult; and (4) how does one maintain backward
-compatibility as new hardware comes out?  The _DSD method was created
-to solve precisely these sorts of problems; Linux drivers should ALWAYS
-use the _DSD method for device properties and nothing else.
-
-The _DSM object (ACPI Section 9.14.1) could also be used for conveying
-device properties to a driver.  Linux drivers should only expect it to
-be used if _DSD cannot represent the data required, and there is no way
-to create a new UUID for the _DSD object.  Note that there is even less
-regulation of the use of _DSM than there is of _DSD.  Drivers that depend
-on the contents of _DSM objects will be more difficult to maintain over
-time because of this; as of this writing, the use of _DSM is the cause
-of quite a few firmware problems and is not recommended.
-
-Drivers should look for device properties in the _DSD object ONLY; the _DSD
-object is described in the ACPI specification section 6.2.5, but this only
-describes how to define the structure of an object returned via _DSD, and
-how specific data structures are defined by specific UUIDs.  Linux should
-only use the _DSD Device Properties UUID [5]:
-
-   - UUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301
-
-   - https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
-
-The UEFI Forum provides a mechanism for registering device properties [4]
-so that they may be used across all operating systems supporting ACPI.
-Device properties that have not been registered with the UEFI Forum should
-not be used.
-
-Before creating new device properties, check to be sure that they have not
-been defined before and either registered in the Linux kernel documentation
-as DT bindings, or the UEFI Forum as device properties.  While we do not want
-to simply move all DT bindings into ACPI device properties, we can learn from
-what has been previously defined.
-
-If it is necessary to define a new device property, or if it makes sense to
-synthesize the definition of a binding so it can be used in any firmware,
-both DT bindings and ACPI device properties for device drivers have review
-processes.  Use them both.  When the driver itself is submitted for review
-to the Linux mailing lists, the device property definitions needed must be
-submitted at the same time.  A driver that supports ACPI and uses device
-properties will not be considered complete without their definitions.  Once
-the device property has been accepted by the Linux community, it must be
-registered with the UEFI Forum [4], which will review it again for consistency
-within the registry.  This may require iteration.  The UEFI Forum, though,
-will always be the canonical site for device property definitions.
-
-It may make sense to provide notice to the UEFI Forum that there is the
-intent to register a previously unused device property name as a means of
-reserving the name for later use.  Other operating system vendors will
-also be submitting registration requests and this may help smooth the
-process.
-
-Once registration and review have been completed, the kernel provides an
-interface for looking up device properties in a manner independent of
-whether DT or ACPI is being used.  This API should be used [6]; it can
-eliminate some duplication of code paths in driver probing functions and
-discourage divergence between DT bindings and ACPI device properties.
-
-
-Programmable Power Control Resources
-------------------------------------
-Programmable power control resources include such resources as voltage/current
-providers (regulators) and clock sources.
-
-With ACPI, the kernel clock and regulator framework is not expected to be used
-at all.
-
-The kernel assumes that power control of these resources is represented with
-Power Resource Objects (ACPI section 7.1).  The ACPI core will then handle
-correctly enabling and disabling resources as they are needed.  In order to
-get that to work, ACPI assumes each device has defined D-states and that these
-can be controlled through the optional ACPI methods _PS0, _PS1, _PS2, and _PS3;
-in ACPI, _PS0 is the method to invoke to turn a device full on, and _PS3 is for
-turning a device full off.
-
-There are two options for using those Power Resources.  They can:
-
-   -  be managed in a _PSx method which gets called on entry to power
-      state Dx.
-
-   -  be declared separately as power resources with their own _ON and _OFF
-      methods.  They are then tied back to D-states for a particular device
-      via _PRx which specifies which power resources a device needs to be on
-      while in Dx.  Kernel then tracks number of devices using a power resource
-      and calls _ON/_OFF as needed.
-
-The kernel ACPI code will also assume that the _PSx methods follow the normal
-ACPI rules for such methods:
-
-   -  If either _PS0 or _PS3 is implemented, then the other method must also
-      be implemented.
-
-   -  If a device requires usage or setup of a power resource when on, the ASL
-      should organize that it is allocated/enabled using the _PS0 method.
-
-   -  Resources allocated or enabled in the _PS0 method should be disabled
-      or de-allocated in the _PS3 method.
-
-   -  Firmware will leave the resources in a reasonable state before handing
-      over control to the kernel.
-
-Such code in _PSx methods will of course be very platform specific.  But,
-this allows the driver to abstract out the interface for operating the device
-and avoid having to read special non-standard values from ACPI tables. Further,
-abstracting the use of these resources allows the hardware to change over time
-without requiring updates to the driver.
-
-
-Clocks
-------
-ACPI makes the assumption that clocks are initialized by the firmware --
-UEFI, in this case -- to some working value before control is handed over
-to the kernel.  This has implications for devices such as UARTs, or SoC-driven
-LCD displays, for example.
-
-When the kernel boots, the clocks are assumed to be set to reasonable
-working values.  If for some reason the frequency needs to change -- e.g.,
-throttling for power management -- the device driver should expect that
-process to be abstracted out into some ACPI method that can be invoked
-(please see the ACPI specification for further recommendations on standard
-methods to be expected).  The only exceptions to this are CPU clocks where
-CPPC provides a much richer interface than ACPI methods.  If the clocks
-are not set, there is no direct way for Linux to control them.
-
-If an SoC vendor wants to provide fine-grained control of the system clocks,
-they could do so by providing ACPI methods that could be invoked by Linux
-drivers.  However, this is NOT recommended and Linux drivers should NOT use
-such methods, even if they are provided.  Such methods are not currently
-standardized in the ACPI specification, and using them could tie a kernel
-to a very specific SoC, or tie an SoC to a very specific version of the
-kernel, both of which we are trying to avoid.
-
-
-Driver Recommendations
-----------------------
-DO NOT remove any DT handling when adding ACPI support for a driver.  The
-same device may be used on many different systems.
-
-DO try to structure the driver so that it is data-driven.  That is, set up
-a struct containing internal per-device state based on defaults and whatever
-else must be discovered by the driver probe function.  Then, have the rest
-of the driver operate off of the contents of that struct.  Doing so should
-allow most divergence between ACPI and DT functionality to be kept local to
-the probe function instead of being scattered throughout the driver.  For
-example::
-
-  static int device_probe_dt(struct platform_device *pdev)
-  {
-         /* DT specific functionality */
-         ...
-  }
-
-  static int device_probe_acpi(struct platform_device *pdev)
-  {
-         /* ACPI specific functionality */
-         ...
-  }
-
-  static int device_probe(struct platform_device *pdev)
-  {
-         ...
-         struct device_node node = pdev->dev.of_node;
-         ...
-
-         if (node)
-                 ret = device_probe_dt(pdev);
-         else if (ACPI_HANDLE(&pdev->dev))
-                 ret = device_probe_acpi(pdev);
-         else
-                 /* other initialization */
-                 ...
-         /* Continue with any generic probe operations */
-         ...
-  }
-
-DO keep the MODULE_DEVICE_TABLE entries together in the driver to make it
-clear the different names the driver is probed for, both from DT and from
-ACPI::
-
-  static struct of_device_id virtio_mmio_match[] = {
-          { .compatible = "virtio,mmio", },
-          { }
-  };
-  MODULE_DEVICE_TABLE(of, virtio_mmio_match);
-
-  static const struct acpi_device_id virtio_mmio_acpi_match[] = {
-          { "LNRO0005", },
-          { }
-  };
-  MODULE_DEVICE_TABLE(acpi, virtio_mmio_acpi_match);
-
-
-ASWG
-----
-The ACPI specification changes regularly.  During the year 2014, for instance,
-version 5.1 was released and version 6.0 substantially completed, with most of
-the changes being driven by ARM-specific requirements.  Proposed changes are
-presented and discussed in the ASWG (ACPI Specification Working Group) which
-is a part of the UEFI Forum.  The current version of the ACPI specification
-is 6.1 release in January 2016.
-
-Participation in this group is open to all UEFI members.  Please see
-http://www.uefi.org/workinggroup for details on group membership.
-
-It is the intent of the ARMv8 ACPI kernel code to follow the ACPI specification
-as closely as possible, and to only implement functionality that complies with
-the released standards from UEFI ASWG.  As a practical matter, there will be
-vendors that provide bad ACPI tables or violate the standards in some way.
-If this is because of errors, quirks and fix-ups may be necessary, but will
-be avoided if possible.  If there are features missing from ACPI that preclude
-it from being used on a platform, ECRs (Engineering Change Requests) should be
-submitted to ASWG and go through the normal approval process; for those that
-are not UEFI members, many other members of the Linux community are and would
-likely be willing to assist in submitting ECRs.
-
-
-Linux Code
-----------
-Individual items specific to Linux on ARM, contained in the Linux
-source code, are in the list that follows:
-
-ACPI_OS_NAME
-                       This macro defines the string to be returned when
-                       an ACPI method invokes the _OS method.  On ARM64
-                       systems, this macro will be "Linux" by default.
-                       The command line parameter acpi_os=<string>
-                       can be used to set it to some other value.  The
-                       default value for other architectures is "Microsoft
-                       Windows NT", for example.
-
-ACPI Objects
-------------
-Detailed expectations for ACPI tables and object are listed in the file
-Documentation/arm64/acpi_object_usage.rst.
-
-
-References
-----------
-[0] http://silver.arm.com
-    document ARM-DEN-0029, or newer:
-    "Server Base System Architecture", version 2.3, dated 27 Mar 2014
-
-[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0044a/Server_Base_Boot_Requirements.pdf
-    Document ARM-DEN-0044A, or newer: "Server Base Boot Requirements, System
-    Software on ARM Platforms", dated 16 Aug 2014
-
-[2] http://www.secretlab.ca/archives/151,
-    10 Jan 2015, Copyright (c) 2015,
-    Linaro Ltd., written by Grant Likely.
-
-[3] AMD ACPI for Seattle platform documentation
-    http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/Seattle_ACPI_Guide.pdf
-
-
-[4] http://www.uefi.org/acpi
-    please see the link for the "ACPI _DSD Device
-    Property Registry Instructions"
-
-[5] http://www.uefi.org/acpi
-    please see the link for the "_DSD (Device
-    Specific Data) Implementation Guide"
-
-[6] Kernel code for the unified device
-    property interface can be found in
-    include/linux/property.h and drivers/base/property.c.
-
-
-Authors
--------
-- Al Stone <al.stone@linaro.org>
-- Graeme Gregory <graeme.gregory@linaro.org>
-- Hanjun Guo <hanjun.guo@linaro.org>
-
-- Grant Likely <grant.likely@linaro.org>, for the "Why ACPI on ARM?" section
diff --git a/Documentation/arm64/asymmetric-32bit.rst b/Documentation/arm64/asymmetric-32bit.rst
deleted file mode 100644
index 64a0b505da7d8..0000000000000
--- a/Documentation/arm64/asymmetric-32bit.rst
+++ /dev/null
@@ -1,155 +0,0 @@
-======================
-Asymmetric 32-bit SoCs
-======================
-
-Author: Will Deacon <will@kernel.org>
-
-This document describes the impact of asymmetric 32-bit SoCs on the
-execution of 32-bit (``AArch32``) applications.
-
-Date: 2021-05-17
-
-Introduction
-============
-
-Some Armv9 SoCs suffer from a big.LITTLE misfeature where only a subset
-of the CPUs are capable of executing 32-bit user applications. On such
-a system, Linux by default treats the asymmetry as a "mismatch" and
-disables support for both the ``PER_LINUX32`` personality and
-``execve(2)`` of 32-bit ELF binaries, with the latter returning
-``-ENOEXEC``. If the mismatch is detected during late onlining of a
-64-bit-only CPU, then the onlining operation fails and the new CPU is
-unavailable for scheduling.
-
-Surprisingly, these SoCs have been produced with the intention of
-running legacy 32-bit binaries. Unsurprisingly, that doesn't work very
-well with the default behaviour of Linux.
-
-It seems inevitable that future SoCs will drop 32-bit support
-altogether, so if you're stuck in the unenviable position of needing to
-run 32-bit code on one of these transitionary platforms then you would
-be wise to consider alternatives such as recompilation, emulation or
-retirement. If neither of those options are practical, then read on.
-
-Enabling kernel support
-=======================
-
-Since the kernel support is not completely transparent to userspace,
-allowing 32-bit tasks to run on an asymmetric 32-bit system requires an
-explicit "opt-in" and can be enabled by passing the
-``allow_mismatched_32bit_el0`` parameter on the kernel command-line.
-
-For the remainder of this document we will refer to an *asymmetric
-system* to mean an asymmetric 32-bit SoC running Linux with this kernel
-command-line option enabled.
-
-Userspace impact
-================
-
-32-bit tasks running on an asymmetric system behave in mostly the same
-way as on a homogeneous system, with a few key differences relating to
-CPU affinity.
-
-sysfs
------
-
-The subset of CPUs capable of running 32-bit tasks is described in
-``/sys/devices/system/cpu/aarch32_el0`` and is documented further in
-``Documentation/ABI/testing/sysfs-devices-system-cpu``.
-
-**Note:** CPUs are advertised by this file as they are detected and so
-late-onlining of 32-bit-capable CPUs can result in the file contents
-being modified by the kernel at runtime. Once advertised, CPUs are never
-removed from the file.
-
-``execve(2)``
--------------
-
-On a homogeneous system, the CPU affinity of a task is preserved across
-``execve(2)``. This is not always possible on an asymmetric system,
-specifically when the new program being executed is 32-bit yet the
-affinity mask contains 64-bit-only CPUs. In this situation, the kernel
-determines the new affinity mask as follows:
-
-  1. If the 32-bit-capable subset of the affinity mask is not empty,
-     then the affinity is restricted to that subset and the old affinity
-     mask is saved. This saved mask is inherited over ``fork(2)`` and
-     preserved across ``execve(2)`` of 32-bit programs.
-
-     **Note:** This step does not apply to ``SCHED_DEADLINE`` tasks.
-     See `SCHED_DEADLINE`_.
-
-  2. Otherwise, the cpuset hierarchy of the task is walked until an
-     ancestor is found containing at least one 32-bit-capable CPU. The
-     affinity of the task is then changed to match the 32-bit-capable
-     subset of the cpuset determined by the walk.
-
-  3. On failure (i.e. out of memory), the affinity is changed to the set
-     of all 32-bit-capable CPUs of which the kernel is aware.
-
-A subsequent ``execve(2)`` of a 64-bit program by the 32-bit task will
-invalidate the affinity mask saved in (1) and attempt to restore the CPU
-affinity of the task using the saved mask if it was previously valid.
-This restoration may fail due to intervening changes to the deadline
-policy or cpuset hierarchy, in which case the ``execve(2)`` continues
-with the affinity unchanged.
-
-Calls to ``sched_setaffinity(2)`` for a 32-bit task will consider only
-the 32-bit-capable CPUs of the requested affinity mask. On success, the
-affinity for the task is updated and any saved mask from a prior
-``execve(2)`` is invalidated.
-
-``SCHED_DEADLINE``
-------------------
-
-Explicit admission of a 32-bit deadline task to the default root domain
-(e.g. by calling ``sched_setattr(2)``) is rejected on an asymmetric
-32-bit system unless admission control is disabled by writing -1 to
-``/proc/sys/kernel/sched_rt_runtime_us``.
-
-``execve(2)`` of a 32-bit program from a 64-bit deadline task will
-return ``-ENOEXEC`` if the root domain for the task contains any
-64-bit-only CPUs and admission control is enabled. Concurrent offlining
-of 32-bit-capable CPUs may still necessitate the procedure described in
-`execve(2)`_, in which case step (1) is skipped and a warning is
-emitted on the console.
-
-**Note:** It is recommended that a set of 32-bit-capable CPUs are placed
-into a separate root domain if ``SCHED_DEADLINE`` is to be used with
-32-bit tasks on an asymmetric system. Failure to do so is likely to
-result in missed deadlines.
-
-Cpusets
--------
-
-The affinity of a 32-bit task on an asymmetric system may include CPUs
-that are not explicitly allowed by the cpuset to which it is attached.
-This can occur as a result of the following two situations:
-
-  - A 64-bit task attached to a cpuset which allows only 64-bit CPUs
-    executes a 32-bit program.
-
-  - All of the 32-bit-capable CPUs allowed by a cpuset containing a
-    32-bit task are offlined.
-
-In both of these cases, the new affinity is calculated according to step
-(2) of the process described in `execve(2)`_ and the cpuset hierarchy is
-unchanged irrespective of the cgroup version.
-
-CPU hotplug
------------
-
-On an asymmetric system, the first detected 32-bit-capable CPU is
-prevented from being offlined by userspace and any such attempt will
-return ``-EPERM``. Note that suspend is still permitted even if the
-primary CPU (i.e. CPU 0) is 64-bit-only.
-
-KVM
----
-
-Although KVM will not advertise 32-bit EL0 support to any vCPUs on an
-asymmetric system, a broken guest at EL1 could still attempt to execute
-32-bit code at EL0. In this case, an exit from a vCPU thread in 32-bit
-mode will return to host userspace with an ``exit_reason`` of
-``KVM_EXIT_FAIL_ENTRY`` and will remain non-runnable until successfully
-re-initialised by a subsequent ``KVM_ARM_VCPU_INIT`` operation.
diff --git a/Documentation/arm64/booting.rst b/Documentation/arm64/booting.rst
deleted file mode 100644
index ffeccdd6bdac9..0000000000000
--- a/Documentation/arm64/booting.rst
+++ /dev/null
@@ -1,431 +0,0 @@
-=====================
-Booting AArch64 Linux
-=====================
-
-Author: Will Deacon <will.deacon@arm.com>
-
-Date  : 07 September 2012
-
-This document is based on the ARM booting document by Russell King and
-is relevant to all public releases of the AArch64 Linux kernel.
-
-The AArch64 exception model is made up of a number of exception levels
-(EL0 - EL3), with EL0, EL1 and EL2 having a secure and a non-secure
-counterpart.  EL2 is the hypervisor level, EL3 is the highest priority
-level and exists only in secure mode. Both are architecturally optional.
-
-For the purposes of this document, we will use the term `boot loader`
-simply to define all software that executes on the CPU(s) before control
-is passed to the Linux kernel.  This may include secure monitor and
-hypervisor code, or it may just be a handful of instructions for
-preparing a minimal boot environment.
-
-Essentially, the boot loader should provide (as a minimum) the
-following:
-
-1. Setup and initialise the RAM
-2. Setup the device tree
-3. Decompress the kernel image
-4. Call the kernel image
-
-
-1. Setup and initialise RAM
----------------------------
-
-Requirement: MANDATORY
-
-The boot loader is expected to find and initialise all RAM that the
-kernel will use for volatile data storage in the system.  It performs
-this in a machine dependent manner.  (It may use internal algorithms
-to automatically locate and size all RAM, or it may use knowledge of
-the RAM in the machine, or any other method the boot loader designer
-sees fit.)
-
-
-2. Setup the device tree
--------------------------
-
-Requirement: MANDATORY
-
-The device tree blob (dtb) must be placed on an 8-byte boundary and must
-not exceed 2 megabytes in size. Since the dtb will be mapped cacheable
-using blocks of up to 2 megabytes in size, it must not be placed within
-any 2M region which must be mapped with any specific attributes.
-
-NOTE: versions prior to v4.2 also require that the DTB be placed within
-the 512 MB region starting at text_offset bytes below the kernel Image.
-
-3. Decompress the kernel image
-------------------------------
-
-Requirement: OPTIONAL
-
-The AArch64 kernel does not currently provide a decompressor and
-therefore requires decompression (gzip etc.) to be performed by the boot
-loader if a compressed Image target (e.g. Image.gz) is used.  For
-bootloaders that do not implement this requirement, the uncompressed
-Image target is available instead.
-
-
-4. Call the kernel image
-------------------------
-
-Requirement: MANDATORY
-
-The decompressed kernel image contains a 64-byte header as follows::
-
-  u32 code0;			/* Executable code */
-  u32 code1;			/* Executable code */
-  u64 text_offset;		/* Image load offset, little endian */
-  u64 image_size;		/* Effective Image size, little endian */
-  u64 flags;			/* kernel flags, little endian */
-  u64 res2	= 0;		/* reserved */
-  u64 res3	= 0;		/* reserved */
-  u64 res4	= 0;		/* reserved */
-  u32 magic	= 0x644d5241;	/* Magic number, little endian, "ARM\x64" */
-  u32 res5;			/* reserved (used for PE COFF offset) */
-
-
-Header notes:
-
-- As of v3.17, all fields are little endian unless stated otherwise.
-
-- code0/code1 are responsible for branching to stext.
-
-- when booting through EFI, code0/code1 are initially skipped.
-  res5 is an offset to the PE header and the PE header has the EFI
-  entry point (efi_stub_entry).  When the stub has done its work, it
-  jumps to code0 to resume the normal boot process.
-
-- Prior to v3.17, the endianness of text_offset was not specified.  In
-  these cases image_size is zero and text_offset is 0x80000 in the
-  endianness of the kernel.  Where image_size is non-zero image_size is
-  little-endian and must be respected.  Where image_size is zero,
-  text_offset can be assumed to be 0x80000.
-
-- The flags field (introduced in v3.17) is a little-endian 64-bit field
-  composed as follows:
-
-  ============= ===============================================================
-  Bit 0		Kernel endianness.  1 if BE, 0 if LE.
-  Bit 1-2	Kernel Page size.
-
-			* 0 - Unspecified.
-			* 1 - 4K
-			* 2 - 16K
-			* 3 - 64K
-  Bit 3		Kernel physical placement
-
-			0
-			  2MB aligned base should be as close as possible
-			  to the base of DRAM, since memory below it is not
-			  accessible via the linear mapping
-			1
-			  2MB aligned base such that all image_size bytes
-			  counted from the start of the image are within
-			  the 48-bit addressable range of physical memory
-  Bits 4-63	Reserved.
-  ============= ===============================================================
-
-- When image_size is zero, a bootloader should attempt to keep as much
-  memory as possible free for use by the kernel immediately after the
-  end of the kernel image. The amount of space required will vary
-  depending on selected features, and is effectively unbound.
-
-The Image must be placed text_offset bytes from a 2MB aligned base
-address anywhere in usable system RAM and called there. The region
-between the 2 MB aligned base address and the start of the image has no
-special significance to the kernel, and may be used for other purposes.
-At least image_size bytes from the start of the image must be free for
-use by the kernel.
-NOTE: versions prior to v4.6 cannot make use of memory below the
-physical offset of the Image so it is recommended that the Image be
-placed as close as possible to the start of system RAM.
-
-If an initrd/initramfs is passed to the kernel at boot, it must reside
-entirely within a 1 GB aligned physical memory window of up to 32 GB in
-size that fully covers the kernel Image as well.
-
-Any memory described to the kernel (even that below the start of the
-image) which is not marked as reserved from the kernel (e.g., with a
-memreserve region in the device tree) will be considered as available to
-the kernel.
-
-Before jumping into the kernel, the following conditions must be met:
-
-- Quiesce all DMA capable devices so that memory does not get
-  corrupted by bogus network packets or disk data.  This will save
-  you many hours of debug.
-
-- Primary CPU general-purpose register settings:
-
-    - x0 = physical address of device tree blob (dtb) in system RAM.
-    - x1 = 0 (reserved for future use)
-    - x2 = 0 (reserved for future use)
-    - x3 = 0 (reserved for future use)
-
-- CPU mode
-
-  All forms of interrupts must be masked in PSTATE.DAIF (Debug, SError,
-  IRQ and FIQ).
-  The CPU must be in non-secure state, either in EL2 (RECOMMENDED in order
-  to have access to the virtualisation extensions), or in EL1.
-
-- Caches, MMUs
-
-  The MMU must be off.
-
-  The instruction cache may be on or off, and must not hold any stale
-  entries corresponding to the loaded kernel image.
-
-  The address range corresponding to the loaded kernel image must be
-  cleaned to the PoC. In the presence of a system cache or other
-  coherent masters with caches enabled, this will typically require
-  cache maintenance by VA rather than set/way operations.
-  System caches which respect the architected cache maintenance by VA
-  operations must be configured and may be enabled.
-  System caches which do not respect architected cache maintenance by VA
-  operations (not recommended) must be configured and disabled.
-
-- Architected timers
-
-  CNTFRQ must be programmed with the timer frequency and CNTVOFF must
-  be programmed with a consistent value on all CPUs.  If entering the
-  kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0) set where
-  available.
-
-- Coherency
-
-  All CPUs to be booted by the kernel must be part of the same coherency
-  domain on entry to the kernel.  This may require IMPLEMENTATION DEFINED
-  initialisation to enable the receiving of maintenance operations on
-  each CPU.
-
-- System registers
-
-  All writable architected system registers at or below the exception
-  level where the kernel image will be entered must be initialised by
-  software at a higher exception level to prevent execution in an UNKNOWN
-  state.
-
-  For all systems:
-  - If EL3 is present:
-
-    - SCR_EL3.FIQ must have the same value across all CPUs the kernel is
-      executing on.
-    - The value of SCR_EL3.FIQ must be the same as the one present at boot
-      time whenever the kernel is executing.
-
-  - If EL3 is present and the kernel is entered at EL2:
-
-    - SCR_EL3.HCE (bit 8) must be initialised to 0b1.
-
-  For systems with a GICv3 interrupt controller to be used in v3 mode:
-  - If EL3 is present:
-
-      - ICC_SRE_EL3.Enable (bit 3) must be initialised to 0b1.
-      - ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
-      - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
-        all CPUs the kernel is executing on, and must stay constant
-        for the lifetime of the kernel.
-
-  - If the kernel is entered at EL1:
-
-      - ICC.SRE_EL2.Enable (bit 3) must be initialised to 0b1
-      - ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b1.
-
-  - The DT or ACPI tables must describe a GICv3 interrupt controller.
-
-  For systems with a GICv3 interrupt controller to be used in
-  compatibility (v2) mode:
-
-  - If EL3 is present:
-
-      ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b0.
-
-  - If the kernel is entered at EL1:
-
-      ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b0.
-
-  - The DT or ACPI tables must describe a GICv2 interrupt controller.
-
-  For CPUs with pointer authentication functionality:
-
-  - If EL3 is present:
-
-    - SCR_EL3.APK (bit 16) must be initialised to 0b1
-    - SCR_EL3.API (bit 17) must be initialised to 0b1
-
-  - If the kernel is entered at EL1:
-
-    - HCR_EL2.APK (bit 40) must be initialised to 0b1
-    - HCR_EL2.API (bit 41) must be initialised to 0b1
-
-  For CPUs with Activity Monitors Unit v1 (AMUv1) extension present:
-
-  - If EL3 is present:
-
-    - CPTR_EL3.TAM (bit 30) must be initialised to 0b0
-    - CPTR_EL2.TAM (bit 30) must be initialised to 0b0
-    - AMCNTENSET0_EL0 must be initialised to 0b1111
-    - AMCNTENSET1_EL0 must be initialised to a platform specific value
-      having 0b1 set for the corresponding bit for each of the auxiliary
-      counters present.
-
-  - If the kernel is entered at EL1:
-
-    - AMCNTENSET0_EL0 must be initialised to 0b1111
-    - AMCNTENSET1_EL0 must be initialised to a platform specific value
-      having 0b1 set for the corresponding bit for each of the auxiliary
-      counters present.
-
-  For CPUs with the Fine Grained Traps (FEAT_FGT) extension present:
-
-  - If EL3 is present and the kernel is entered at EL2:
-
-    - SCR_EL3.FGTEn (bit 27) must be initialised to 0b1.
-
-  For CPUs with support for HCRX_EL2 (FEAT_HCX) present:
-
-  - If EL3 is present and the kernel is entered at EL2:
-
-    - SCR_EL3.HXEn (bit 38) must be initialised to 0b1.
-
-  For CPUs with Advanced SIMD and floating point support:
-
-  - If EL3 is present:
-
-    - CPTR_EL3.TFP (bit 10) must be initialised to 0b0.
-
-  - If EL2 is present and the kernel is entered at EL1:
-
-    - CPTR_EL2.TFP (bit 10) must be initialised to 0b0.
-
-  For CPUs with the Scalable Vector Extension (FEAT_SVE) present:
-
-  - if EL3 is present:
-
-    - CPTR_EL3.EZ (bit 8) must be initialised to 0b1.
-
-    - ZCR_EL3.LEN must be initialised to the same value for all CPUs the
-      kernel is executed on.
-
-  - If the kernel is entered at EL1 and EL2 is present:
-
-    - CPTR_EL2.TZ (bit 8) must be initialised to 0b0.
-
-    - CPTR_EL2.ZEN (bits 17:16) must be initialised to 0b11.
-
-    - ZCR_EL2.LEN must be initialised to the same value for all CPUs the
-      kernel will execute on.
-
-  For CPUs with the Scalable Matrix Extension (FEAT_SME):
-
-  - If EL3 is present:
-
-    - CPTR_EL3.ESM (bit 12) must be initialised to 0b1.
-
-    - SCR_EL3.EnTP2 (bit 41) must be initialised to 0b1.
-
-    - SMCR_EL3.LEN must be initialised to the same value for all CPUs the
-      kernel will execute on.
-
- - If the kernel is entered at EL1 and EL2 is present:
-
-    - CPTR_EL2.TSM (bit 12) must be initialised to 0b0.
-
-    - CPTR_EL2.SMEN (bits 25:24) must be initialised to 0b11.
-
-    - SCTLR_EL2.EnTP2 (bit 60) must be initialised to 0b1.
-
-    - SMCR_EL2.LEN must be initialised to the same value for all CPUs the
-      kernel will execute on.
-
-    - HWFGRTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01.
-
-    - HWFGWTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01.
-
-    - HWFGRTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01.
-
-    - HWFGWTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01.
-
-  For CPUs with the Scalable Matrix Extension FA64 feature (FEAT_SME_FA64):
-
-  - If EL3 is present:
-
-    - SMCR_EL3.FA64 (bit 31) must be initialised to 0b1.
-
- - If the kernel is entered at EL1 and EL2 is present:
-
-    - SMCR_EL2.FA64 (bit 31) must be initialised to 0b1.
-
-  For CPUs with the Memory Tagging Extension feature (FEAT_MTE2):
-
-  - If EL3 is present:
-
-    - SCR_EL3.ATA (bit 26) must be initialised to 0b1.
-
-  - If the kernel is entered at EL1 and EL2 is present:
-
-    - HCR_EL2.ATA (bit 56) must be initialised to 0b1.
-
-  For CPUs with the Scalable Matrix Extension version 2 (FEAT_SME2):
-
-  - If EL3 is present:
-
-    - SMCR_EL3.EZT0 (bit 30) must be initialised to 0b1.
-
- - If the kernel is entered at EL1 and EL2 is present:
-
-    - SMCR_EL2.EZT0 (bit 30) must be initialised to 0b1.
-
-The requirements described above for CPU mode, caches, MMUs, architected
-timers, coherency and system registers apply to all CPUs.  All CPUs must
-enter the kernel in the same exception level.  Where the values documented
-disable traps it is permissible for these traps to be enabled so long as
-those traps are handled transparently by higher exception levels as though
-the values documented were set.
-
-The boot loader is expected to enter the kernel on each CPU in the
-following manner:
-
-- The primary CPU must jump directly to the first instruction of the
-  kernel image.  The device tree blob passed by this CPU must contain
-  an 'enable-method' property for each cpu node.  The supported
-  enable-methods are described below.
-
-  It is expected that the bootloader will generate these device tree
-  properties and insert them into the blob prior to kernel entry.
-
-- CPUs with a "spin-table" enable-method must have a 'cpu-release-addr'
-  property in their cpu node.  This property identifies a
-  naturally-aligned 64-bit zero-initalised memory location.
-
-  These CPUs should spin outside of the kernel in a reserved area of
-  memory (communicated to the kernel by a /memreserve/ region in the
-  device tree) polling their cpu-release-addr location, which must be
-  contained in the reserved region.  A wfe instruction may be inserted
-  to reduce the overhead of the busy-loop and a sev will be issued by
-  the primary CPU.  When a read of the location pointed to by the
-  cpu-release-addr returns a non-zero value, the CPU must jump to this
-  value.  The value will be written as a single 64-bit little-endian
-  value, so CPUs must convert the read value to their native endianness
-  before jumping to it.
-
-- CPUs with a "psci" enable method should remain outside of
-  the kernel (i.e. outside of the regions of memory described to the
-  kernel in the memory node, or in a reserved area of memory described
-  to the kernel by a /memreserve/ region in the device tree).  The
-  kernel will issue CPU_ON calls as described in ARM document number ARM
-  DEN 0022A ("Power State Coordination Interface System Software on ARM
-  processors") to bring CPUs into the kernel.
-
-  The device tree should contain a 'psci' node, as described in
-  Documentation/devicetree/bindings/arm/psci.yaml.
-
-- Secondary CPU general-purpose register settings
-
-  - x0 = 0 (reserved for future use)
-  - x1 = 0 (reserved for future use)
-  - x2 = 0 (reserved for future use)
-  - x3 = 0 (reserved for future use)
diff --git a/Documentation/arm64/cpu-feature-registers.rst b/Documentation/arm64/cpu-feature-registers.rst
deleted file mode 100644
index c7adc7897df60..0000000000000
--- a/Documentation/arm64/cpu-feature-registers.rst
+++ /dev/null
@@ -1,400 +0,0 @@
-===========================
-ARM64 CPU Feature Registers
-===========================
-
-Author: Suzuki K Poulose <suzuki.poulose@arm.com>
-
-
-This file describes the ABI for exporting the AArch64 CPU ID/feature
-registers to userspace. The availability of this ABI is advertised
-via the HWCAP_CPUID in HWCAPs.
-
-1. Motivation
--------------
-
-The ARM architecture defines a set of feature registers, which describe
-the capabilities of the CPU/system. Access to these system registers is
-restricted from EL0 and there is no reliable way for an application to
-extract this information to make better decisions at runtime. There is
-limited information available to the application via HWCAPs, however
-there are some issues with their usage.
-
- a) Any change to the HWCAPs requires an update to userspace (e.g libc)
-    to detect the new changes, which can take a long time to appear in
-    distributions. Exposing the registers allows applications to get the
-    information without requiring updates to the toolchains.
-
- b) Access to HWCAPs is sometimes limited (e.g prior to libc, or
-    when ld is initialised at startup time).
-
- c) HWCAPs cannot represent non-boolean information effectively. The
-    architecture defines a canonical format for representing features
-    in the ID registers; this is well defined and is capable of
-    representing all valid architecture variations.
-
-
-2. Requirements
----------------
-
- a) Safety:
-
-    Applications should be able to use the information provided by the
-    infrastructure to run safely across the system. This has greater
-    implications on a system with heterogeneous CPUs.
-    The infrastructure exports a value that is safe across all the
-    available CPU on the system.
-
-    e.g, If at least one CPU doesn't implement CRC32 instructions, while
-    others do, we should report that the CRC32 is not implemented.
-    Otherwise an application could crash when scheduled on the CPU
-    which doesn't support CRC32.
-
- b) Security:
-
-    Applications should only be able to receive information that is
-    relevant to the normal operation in userspace. Hence, some of the
-    fields are masked out(i.e, made invisible) and their values are set to
-    indicate the feature is 'not supported'. See Section 4 for the list
-    of visible features. Also, the kernel may manipulate the fields
-    based on what it supports. e.g, If FP is not supported by the
-    kernel, the values could indicate that the FP is not available
-    (even when the CPU provides it).
-
- c) Implementation Defined Features
-
-    The infrastructure doesn't expose any register which is
-    IMPLEMENTATION DEFINED as per ARMv8-A Architecture.
-
- d) CPU Identification:
-
-    MIDR_EL1 is exposed to help identify the processor. On a
-    heterogeneous system, this could be racy (just like getcpu()). The
-    process could be migrated to another CPU by the time it uses the
-    register value, unless the CPU affinity is set. Hence, there is no
-    guarantee that the value reflects the processor that it is
-    currently executing on. The REVIDR is not exposed due to this
-    constraint, as REVIDR makes sense only in conjunction with the
-    MIDR. Alternately, MIDR_EL1 and REVIDR_EL1 are exposed via sysfs
-    at::
-
-	/sys/devices/system/cpu/cpu$ID/regs/identification/
-	                                              \- midr
-	                                              \- revidr
-
-3. Implementation
---------------------
-
-The infrastructure is built on the emulation of the 'MRS' instruction.
-Accessing a restricted system register from an application generates an
-exception and ends up in SIGILL being delivered to the process.
-The infrastructure hooks into the exception handler and emulates the
-operation if the source belongs to the supported system register space.
-
-The infrastructure emulates only the following system register space::
-
-	Op0=3, Op1=0, CRn=0, CRm=0,2,3,4,5,6,7
-
-(See Table C5-6 'System instruction encodings for non-Debug System
-register accesses' in ARMv8 ARM DDI 0487A.h, for the list of
-registers).
-
-The following rules are applied to the value returned by the
-infrastructure:
-
- a) The value of an 'IMPLEMENTATION DEFINED' field is set to 0.
- b) The value of a reserved field is populated with the reserved
-    value as defined by the architecture.
- c) The value of a 'visible' field holds the system wide safe value
-    for the particular feature (except for MIDR_EL1, see section 4).
- d) All other fields (i.e, invisible fields) are set to indicate
-    the feature is missing (as defined by the architecture).
-
-4. List of registers with visible features
--------------------------------------------
-
-  1) ID_AA64ISAR0_EL1 - Instruction Set Attribute Register 0
-
-     +------------------------------+---------+---------+
-     | Name                         |  bits   | visible |
-     +------------------------------+---------+---------+
-     | RNDR                         | [63-60] |    y    |
-     +------------------------------+---------+---------+
-     | TS                           | [55-52] |    y    |
-     +------------------------------+---------+---------+
-     | FHM                          | [51-48] |    y    |
-     +------------------------------+---------+---------+
-     | DP                           | [47-44] |    y    |
-     +------------------------------+---------+---------+
-     | SM4                          | [43-40] |    y    |
-     +------------------------------+---------+---------+
-     | SM3                          | [39-36] |    y    |
-     +------------------------------+---------+---------+
-     | SHA3                         | [35-32] |    y    |
-     +------------------------------+---------+---------+
-     | RDM                          | [31-28] |    y    |
-     +------------------------------+---------+---------+
-     | ATOMICS                      | [23-20] |    y    |
-     +------------------------------+---------+---------+
-     | CRC32                        | [19-16] |    y    |
-     +------------------------------+---------+---------+
-     | SHA2                         | [15-12] |    y    |
-     +------------------------------+---------+---------+
-     | SHA1                         | [11-8]  |    y    |
-     +------------------------------+---------+---------+
-     | AES                          | [7-4]   |    y    |
-     +------------------------------+---------+---------+
-
-
-  2) ID_AA64PFR0_EL1 - Processor Feature Register 0
-
-     +------------------------------+---------+---------+
-     | Name                         |  bits   | visible |
-     +------------------------------+---------+---------+
-     | DIT                          | [51-48] |    y    |
-     +------------------------------+---------+---------+
-     | SVE                          | [35-32] |    y    |
-     +------------------------------+---------+---------+
-     | GIC                          | [27-24] |    n    |
-     +------------------------------+---------+---------+
-     | AdvSIMD                      | [23-20] |    y    |
-     +------------------------------+---------+---------+
-     | FP                           | [19-16] |    y    |
-     +------------------------------+---------+---------+
-     | EL3                          | [15-12] |    n    |
-     +------------------------------+---------+---------+
-     | EL2                          | [11-8]  |    n    |
-     +------------------------------+---------+---------+
-     | EL1                          | [7-4]   |    n    |
-     +------------------------------+---------+---------+
-     | EL0                          | [3-0]   |    n    |
-     +------------------------------+---------+---------+
-
-
-  3) ID_AA64PFR1_EL1 - Processor Feature Register 1
-
-     +------------------------------+---------+---------+
-     | Name                         |  bits   | visible |
-     +------------------------------+---------+---------+
-     | MTE                          | [11-8]  |    y    |
-     +------------------------------+---------+---------+
-     | SSBS                         | [7-4]   |    y    |
-     +------------------------------+---------+---------+
-     | BT                           | [3-0]   |    y    |
-     +------------------------------+---------+---------+
-
-
-  4) MIDR_EL1 - Main ID Register
-
-     +------------------------------+---------+---------+
-     | Name                         |  bits   | visible |
-     +------------------------------+---------+---------+
-     | Implementer                  | [31-24] |    y    |
-     +------------------------------+---------+---------+
-     | Variant                      | [23-20] |    y    |
-     +------------------------------+---------+---------+
-     | Architecture                 | [19-16] |    y    |
-     +------------------------------+---------+---------+
-     | PartNum                      | [15-4]  |    y    |
-     +------------------------------+---------+---------+
-     | Revision                     | [3-0]   |    y    |
-     +------------------------------+---------+---------+
-
-   NOTE: The 'visible' fields of MIDR_EL1 will contain the value
-   as available on the CPU where it is fetched and is not a system
-   wide safe value.
-
-  5) ID_AA64ISAR1_EL1 - Instruction set attribute register 1
-
-     +------------------------------+---------+---------+
-     | Name                         |  bits   | visible |
-     +------------------------------+---------+---------+
-     | I8MM                         | [55-52] |    y    |
-     +------------------------------+---------+---------+
-     | DGH                          | [51-48] |    y    |
-     +------------------------------+---------+---------+
-     | BF16                         | [47-44] |    y    |
-     +------------------------------+---------+---------+
-     | SB                           | [39-36] |    y    |
-     +------------------------------+---------+---------+
-     | FRINTTS                      | [35-32] |    y    |
-     +------------------------------+---------+---------+
-     | GPI                          | [31-28] |    y    |
-     +------------------------------+---------+---------+
-     | GPA                          | [27-24] |    y    |
-     +------------------------------+---------+---------+
-     | LRCPC                        | [23-20] |    y    |
-     +------------------------------+---------+---------+
-     | FCMA                         | [19-16] |    y    |
-     +------------------------------+---------+---------+
-     | JSCVT                        | [15-12] |    y    |
-     +------------------------------+---------+---------+
-     | API                          | [11-8]  |    y    |
-     +------------------------------+---------+---------+
-     | APA                          | [7-4]   |    y    |
-     +------------------------------+---------+---------+
-     | DPB                          | [3-0]   |    y    |
-     +------------------------------+---------+---------+
-
-  6) ID_AA64MMFR0_EL1 - Memory model feature register 0
-
-     +------------------------------+---------+---------+
-     | Name                         |  bits   | visible |
-     +------------------------------+---------+---------+
-     | ECV                          | [63-60] |    y    |
-     +------------------------------+---------+---------+
-
-  7) ID_AA64MMFR2_EL1 - Memory model feature register 2
-
-     +------------------------------+---------+---------+
-     | Name                         |  bits   | visible |
-     +------------------------------+---------+---------+
-     | AT                           | [35-32] |    y    |
-     +------------------------------+---------+---------+
-
-  8) ID_AA64ZFR0_EL1 - SVE feature ID register 0
-
-     +------------------------------+---------+---------+
-     | Name                         |  bits   | visible |
-     +------------------------------+---------+---------+
-     | F64MM                        | [59-56] |    y    |
-     +------------------------------+---------+---------+
-     | F32MM                        | [55-52] |    y    |
-     +------------------------------+---------+---------+
-     | I8MM                         | [47-44] |    y    |
-     +------------------------------+---------+---------+
-     | SM4                          | [43-40] |    y    |
-     +------------------------------+---------+---------+
-     | SHA3                         | [35-32] |    y    |
-     +------------------------------+---------+---------+
-     | BF16                         | [23-20] |    y    |
-     +------------------------------+---------+---------+
-     | BitPerm                      | [19-16] |    y    |
-     +------------------------------+---------+---------+
-     | AES                          | [7-4]   |    y    |
-     +------------------------------+---------+---------+
-     | SVEVer                       | [3-0]   |    y    |
-     +------------------------------+---------+---------+
-
-  8) ID_AA64MMFR1_EL1 - Memory model feature register 1
-
-     +------------------------------+---------+---------+
-     | Name                         |  bits   | visible |
-     +------------------------------+---------+---------+
-     | AFP                          | [47-44] |    y    |
-     +------------------------------+---------+---------+
-
-  9) ID_AA64ISAR2_EL1 - Instruction set attribute register 2
-
-     +------------------------------+---------+---------+
-     | Name                         |  bits   | visible |
-     +------------------------------+---------+---------+
-     | RPRES                        | [7-4]   |    y    |
-     +------------------------------+---------+---------+
-     | WFXT                         | [3-0]   |    y    |
-     +------------------------------+---------+---------+
-
-  10) MVFR0_EL1 - AArch32 Media and VFP Feature Register 0
-
-     +------------------------------+---------+---------+
-     | Name                         |  bits   | visible |
-     +------------------------------+---------+---------+
-     | FPDP                         | [11-8]  |    y    |
-     +------------------------------+---------+---------+
-
-  11) MVFR1_EL1 - AArch32 Media and VFP Feature Register 1
-
-     +------------------------------+---------+---------+
-     | Name                         |  bits   | visible |
-     +------------------------------+---------+---------+
-     | SIMDFMAC                     | [31-28] |    y    |
-     +------------------------------+---------+---------+
-     | SIMDSP                       | [19-16] |    y    |
-     +------------------------------+---------+---------+
-     | SIMDInt                      | [15-12] |    y    |
-     +------------------------------+---------+---------+
-     | SIMDLS                       | [11-8]  |    y    |
-     +------------------------------+---------+---------+
-
-  12) ID_ISAR5_EL1 - AArch32 Instruction Set Attribute Register 5
-
-     +------------------------------+---------+---------+
-     | Name                         |  bits   | visible |
-     +------------------------------+---------+---------+
-     | CRC32                        | [19-16] |    y    |
-     +------------------------------+---------+---------+
-     | SHA2                         | [15-12] |    y    |
-     +------------------------------+---------+---------+
-     | SHA1                         | [11-8]  |    y    |
-     +------------------------------+---------+---------+
-     | AES                          | [7-4]   |    y    |
-     +------------------------------+---------+---------+
-
-
-Appendix I: Example
--------------------
-
-::
-
-  /*
-   * Sample program to demonstrate the MRS emulation ABI.
-   *
-   * Copyright (C) 2015-2016, ARM Ltd
-   *
-   * Author: Suzuki K Poulose <suzuki.poulose@arm.com>
-   *
-   * This program is free software; you can redistribute it and/or modify
-   * it under the terms of the GNU General Public License version 2 as
-   * published by the Free Software Foundation.
-   *
-   * This program is distributed in the hope that it will be useful,
-   * but WITHOUT ANY WARRANTY; without even the implied warranty of
-   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   * GNU General Public License for more details.
-   * This program is free software; you can redistribute it and/or modify
-   * it under the terms of the GNU General Public License version 2 as
-   * published by the Free Software Foundation.
-   *
-   * This program is distributed in the hope that it will be useful,
-   * but WITHOUT ANY WARRANTY; without even the implied warranty of
-   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   * GNU General Public License for more details.
-   */
-
-  #include <asm/hwcap.h>
-  #include <stdio.h>
-  #include <sys/auxv.h>
-
-  #define get_cpu_ftr(id) ({					\
-		unsigned long __val;				\
-		asm("mrs %0, "#id : "=r" (__val));		\
-		printf("%-20s: 0x%016lx\n", #id, __val);	\
-	})
-
-  int main(void)
-  {
-
-	if (!(getauxval(AT_HWCAP) & HWCAP_CPUID)) {
-		fputs("CPUID registers unavailable\n", stderr);
-		return 1;
-	}
-
-	get_cpu_ftr(ID_AA64ISAR0_EL1);
-	get_cpu_ftr(ID_AA64ISAR1_EL1);
-	get_cpu_ftr(ID_AA64MMFR0_EL1);
-	get_cpu_ftr(ID_AA64MMFR1_EL1);
-	get_cpu_ftr(ID_AA64PFR0_EL1);
-	get_cpu_ftr(ID_AA64PFR1_EL1);
-	get_cpu_ftr(ID_AA64DFR0_EL1);
-	get_cpu_ftr(ID_AA64DFR1_EL1);
-
-	get_cpu_ftr(MIDR_EL1);
-	get_cpu_ftr(MPIDR_EL1);
-	get_cpu_ftr(REVIDR_EL1);
-
-  #if 0
-	/* Unexposed register access causes SIGILL */
-	get_cpu_ftr(ID_MMFR0_EL1);
-  #endif
-
-	return 0;
-  }
diff --git a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst
deleted file mode 100644
index 83e57e4d38e2a..0000000000000
--- a/Documentation/arm64/elf_hwcaps.rst
+++ /dev/null
@@ -1,309 +0,0 @@
-.. _elf_hwcaps_index:
-
-================
-ARM64 ELF hwcaps
-================
-
-This document describes the usage and semantics of the arm64 ELF hwcaps.
-
-
-1. Introduction
----------------
-
-Some hardware or software features are only available on some CPU
-implementations, and/or with certain kernel configurations, but have no
-architected discovery mechanism available to userspace code at EL0. The
-kernel exposes the presence of these features to userspace through a set
-of flags called hwcaps, exposed in the auxiliary vector.
-
-Userspace software can test for features by acquiring the AT_HWCAP or
-AT_HWCAP2 entry of the auxiliary vector, and testing whether the relevant
-flags are set, e.g.::
-
-	bool floating_point_is_present(void)
-	{
-		unsigned long hwcaps = getauxval(AT_HWCAP);
-		if (hwcaps & HWCAP_FP)
-			return true;
-
-		return false;
-	}
-
-Where software relies on a feature described by a hwcap, it should check
-the relevant hwcap flag to verify that the feature is present before
-attempting to make use of the feature.
-
-Features cannot be probed reliably through other means. When a feature
-is not available, attempting to use it may result in unpredictable
-behaviour, and is not guaranteed to result in any reliable indication
-that the feature is unavailable, such as a SIGILL.
-
-
-2. Interpretation of hwcaps
----------------------------
-
-The majority of hwcaps are intended to indicate the presence of features
-which are described by architected ID registers inaccessible to
-userspace code at EL0. These hwcaps are defined in terms of ID register
-fields, and should be interpreted with reference to the definition of
-these fields in the ARM Architecture Reference Manual (ARM ARM).
-
-Such hwcaps are described below in the form::
-
-    Functionality implied by idreg.field == val.
-
-Such hwcaps indicate the availability of functionality that the ARM ARM
-defines as being present when idreg.field has value val, but do not
-indicate that idreg.field is precisely equal to val, nor do they
-indicate the absence of functionality implied by other values of
-idreg.field.
-
-Other hwcaps may indicate the presence of features which cannot be
-described by ID registers alone. These may be described without
-reference to ID registers, and may refer to other documentation.
-
-
-3. The hwcaps exposed in AT_HWCAP
----------------------------------
-
-HWCAP_FP
-    Functionality implied by ID_AA64PFR0_EL1.FP == 0b0000.
-
-HWCAP_ASIMD
-    Functionality implied by ID_AA64PFR0_EL1.AdvSIMD == 0b0000.
-
-HWCAP_EVTSTRM
-    The generic timer is configured to generate events at a frequency of
-    approximately 10KHz.
-
-HWCAP_AES
-    Functionality implied by ID_AA64ISAR0_EL1.AES == 0b0001.
-
-HWCAP_PMULL
-    Functionality implied by ID_AA64ISAR0_EL1.AES == 0b0010.
-
-HWCAP_SHA1
-    Functionality implied by ID_AA64ISAR0_EL1.SHA1 == 0b0001.
-
-HWCAP_SHA2
-    Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0001.
-
-HWCAP_CRC32
-    Functionality implied by ID_AA64ISAR0_EL1.CRC32 == 0b0001.
-
-HWCAP_ATOMICS
-    Functionality implied by ID_AA64ISAR0_EL1.Atomic == 0b0010.
-
-HWCAP_FPHP
-    Functionality implied by ID_AA64PFR0_EL1.FP == 0b0001.
-
-HWCAP_ASIMDHP
-    Functionality implied by ID_AA64PFR0_EL1.AdvSIMD == 0b0001.
-
-HWCAP_CPUID
-    EL0 access to certain ID registers is available, to the extent
-    described by Documentation/arm64/cpu-feature-registers.rst.
-
-    These ID registers may imply the availability of features.
-
-HWCAP_ASIMDRDM
-    Functionality implied by ID_AA64ISAR0_EL1.RDM == 0b0001.
-
-HWCAP_JSCVT
-    Functionality implied by ID_AA64ISAR1_EL1.JSCVT == 0b0001.
-
-HWCAP_FCMA
-    Functionality implied by ID_AA64ISAR1_EL1.FCMA == 0b0001.
-
-HWCAP_LRCPC
-    Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0001.
-
-HWCAP_DCPOP
-    Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0001.
-
-HWCAP_SHA3
-    Functionality implied by ID_AA64ISAR0_EL1.SHA3 == 0b0001.
-
-HWCAP_SM3
-    Functionality implied by ID_AA64ISAR0_EL1.SM3 == 0b0001.
-
-HWCAP_SM4
-    Functionality implied by ID_AA64ISAR0_EL1.SM4 == 0b0001.
-
-HWCAP_ASIMDDP
-    Functionality implied by ID_AA64ISAR0_EL1.DP == 0b0001.
-
-HWCAP_SHA512
-    Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0010.
-
-HWCAP_SVE
-    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001.
-
-HWCAP_ASIMDFHM
-   Functionality implied by ID_AA64ISAR0_EL1.FHM == 0b0001.
-
-HWCAP_DIT
-    Functionality implied by ID_AA64PFR0_EL1.DIT == 0b0001.
-
-HWCAP_USCAT
-    Functionality implied by ID_AA64MMFR2_EL1.AT == 0b0001.
-
-HWCAP_ILRCPC
-    Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0010.
-
-HWCAP_FLAGM
-    Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0001.
-
-HWCAP_SSBS
-    Functionality implied by ID_AA64PFR1_EL1.SSBS == 0b0010.
-
-HWCAP_SB
-    Functionality implied by ID_AA64ISAR1_EL1.SB == 0b0001.
-
-HWCAP_PACA
-    Functionality implied by ID_AA64ISAR1_EL1.APA == 0b0001 or
-    ID_AA64ISAR1_EL1.API == 0b0001, as described by
-    Documentation/arm64/pointer-authentication.rst.
-
-HWCAP_PACG
-    Functionality implied by ID_AA64ISAR1_EL1.GPA == 0b0001 or
-    ID_AA64ISAR1_EL1.GPI == 0b0001, as described by
-    Documentation/arm64/pointer-authentication.rst.
-
-HWCAP2_DCPODP
-    Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0010.
-
-HWCAP2_SVE2
-    Functionality implied by ID_AA64ZFR0_EL1.SVEVer == 0b0001.
-
-HWCAP2_SVEAES
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0001.
-
-HWCAP2_SVEPMULL
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0010.
-
-HWCAP2_SVEBITPERM
-    Functionality implied by ID_AA64ZFR0_EL1.BitPerm == 0b0001.
-
-HWCAP2_SVESHA3
-    Functionality implied by ID_AA64ZFR0_EL1.SHA3 == 0b0001.
-
-HWCAP2_SVESM4
-    Functionality implied by ID_AA64ZFR0_EL1.SM4 == 0b0001.
-
-HWCAP2_FLAGM2
-    Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0010.
-
-HWCAP2_FRINT
-    Functionality implied by ID_AA64ISAR1_EL1.FRINTTS == 0b0001.
-
-HWCAP2_SVEI8MM
-    Functionality implied by ID_AA64ZFR0_EL1.I8MM == 0b0001.
-
-HWCAP2_SVEF32MM
-    Functionality implied by ID_AA64ZFR0_EL1.F32MM == 0b0001.
-
-HWCAP2_SVEF64MM
-    Functionality implied by ID_AA64ZFR0_EL1.F64MM == 0b0001.
-
-HWCAP2_SVEBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0001.
-
-HWCAP2_I8MM
-    Functionality implied by ID_AA64ISAR1_EL1.I8MM == 0b0001.
-
-HWCAP2_BF16
-    Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0001.
-
-HWCAP2_DGH
-    Functionality implied by ID_AA64ISAR1_EL1.DGH == 0b0001.
-
-HWCAP2_RNG
-    Functionality implied by ID_AA64ISAR0_EL1.RNDR == 0b0001.
-
-HWCAP2_BTI
-    Functionality implied by ID_AA64PFR0_EL1.BT == 0b0001.
-
-HWCAP2_MTE
-    Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0010, as described
-    by Documentation/arm64/memory-tagging-extension.rst.
-
-HWCAP2_ECV
-    Functionality implied by ID_AA64MMFR0_EL1.ECV == 0b0001.
-
-HWCAP2_AFP
-    Functionality implied by ID_AA64MFR1_EL1.AFP == 0b0001.
-
-HWCAP2_RPRES
-    Functionality implied by ID_AA64ISAR2_EL1.RPRES == 0b0001.
-
-HWCAP2_MTE3
-    Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0011, as described
-    by Documentation/arm64/memory-tagging-extension.rst.
-
-HWCAP2_SME
-    Functionality implied by ID_AA64PFR1_EL1.SME == 0b0001, as described
-    by Documentation/arm64/sme.rst.
-
-HWCAP2_SME_I16I64
-    Functionality implied by ID_AA64SMFR0_EL1.I16I64 == 0b1111.
-
-HWCAP2_SME_F64F64
-    Functionality implied by ID_AA64SMFR0_EL1.F64F64 == 0b1.
-
-HWCAP2_SME_I8I32
-    Functionality implied by ID_AA64SMFR0_EL1.I8I32 == 0b1111.
-
-HWCAP2_SME_F16F32
-    Functionality implied by ID_AA64SMFR0_EL1.F16F32 == 0b1.
-
-HWCAP2_SME_B16F32
-    Functionality implied by ID_AA64SMFR0_EL1.B16F32 == 0b1.
-
-HWCAP2_SME_F32F32
-    Functionality implied by ID_AA64SMFR0_EL1.F32F32 == 0b1.
-
-HWCAP2_SME_FA64
-    Functionality implied by ID_AA64SMFR0_EL1.FA64 == 0b1.
-
-HWCAP2_WFXT
-    Functionality implied by ID_AA64ISAR2_EL1.WFXT == 0b0010.
-
-HWCAP2_EBF16
-    Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0010.
-
-HWCAP2_SVE_EBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0010.
-
-HWCAP2_CSSC
-    Functionality implied by ID_AA64ISAR2_EL1.CSSC == 0b0001.
-
-HWCAP2_RPRFM
-    Functionality implied by ID_AA64ISAR2_EL1.RPRFM == 0b0001.
-
-HWCAP2_SVE2P1
-    Functionality implied by ID_AA64ZFR0_EL1.SVEver == 0b0010.
-
-HWCAP2_SME2
-    Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0001.
-
-HWCAP2_SME2P1
-    Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0010.
-
-HWCAP2_SMEI16I32
-    Functionality implied by ID_AA64SMFR0_EL1.I16I32 == 0b0101
-
-HWCAP2_SMEBI32I32
-    Functionality implied by ID_AA64SMFR0_EL1.BI32I32 == 0b1
-
-HWCAP2_SMEB16B16
-    Functionality implied by ID_AA64SMFR0_EL1.B16B16 == 0b1
-
-HWCAP2_SMEF16F16
-    Functionality implied by ID_AA64SMFR0_EL1.F16F16 == 0b1
-
-4. Unused AT_HWCAP bits
------------------------
-
-For interoperation with userspace, the kernel guarantees that bits 62
-and 63 of AT_HWCAP will always be returned as 0.
diff --git a/Documentation/arm64/features.rst b/Documentation/arm64/features.rst
deleted file mode 100644
index dfa4cb3cd3efa..0000000000000
--- a/Documentation/arm64/features.rst
+++ /dev/null
@@ -1,3 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. kernel-feat:: $srctree/Documentation/features arm64
diff --git a/Documentation/arm64/hugetlbpage.rst b/Documentation/arm64/hugetlbpage.rst
deleted file mode 100644
index a110124c11e38..0000000000000
--- a/Documentation/arm64/hugetlbpage.rst
+++ /dev/null
@@ -1,43 +0,0 @@
-.. _hugetlbpage_index:
-
-====================
-HugeTLBpage on ARM64
-====================
-
-Hugepage relies on making efficient use of TLBs to improve performance of
-address translations. The benefit depends on both -
-
-  - the size of hugepages
-  - size of entries supported by the TLBs
-
-The ARM64 port supports two flavours of hugepages.
-
-1) Block mappings at the pud/pmd level
---------------------------------------
-
-These are regular hugepages where a pmd or a pud page table entry points to a
-block of memory. Regardless of the supported size of entries in TLB, block
-mappings reduce the depth of page table walk needed to translate hugepage
-addresses.
-
-2) Using the Contiguous bit
----------------------------
-
-The architecture provides a contiguous bit in the translation table entries
-(D4.5.3, ARM DDI 0487C.a) that hints to the MMU to indicate that it is one of a
-contiguous set of entries that can be cached in a single TLB entry.
-
-The contiguous bit is used in Linux to increase the mapping size at the pmd and
-pte (last) level. The number of supported contiguous entries varies by page size
-and level of the page table.
-
-
-The following hugepage sizes are supported -
-
-  ====== ========   ====    ========    ===
-  -      CONT PTE    PMD    CONT PMD    PUD
-  ====== ========   ====    ========    ===
-  4K:         64K     2M         32M     1G
-  16K:         2M    32M          1G
-  64K:         2M   512M         16G
-  ====== ========   ====    ========    ===
diff --git a/Documentation/arm64/index.rst b/Documentation/arm64/index.rst
deleted file mode 100644
index ae21f81188302..0000000000000
--- a/Documentation/arm64/index.rst
+++ /dev/null
@@ -1,36 +0,0 @@
-.. _arm64_index:
-
-==================
-ARM64 Architecture
-==================
-
-.. toctree::
-    :maxdepth: 1
-
-    acpi_object_usage
-    amu
-    arm-acpi
-    asymmetric-32bit
-    booting
-    cpu-feature-registers
-    elf_hwcaps
-    hugetlbpage
-    legacy_instructions
-    memory
-    memory-tagging-extension
-    perf
-    pointer-authentication
-    silicon-errata
-    sme
-    sve
-    tagged-address-abi
-    tagged-pointers
-
-    features
-
-.. only::  subproject and html
-
-   Indices
-   =======
-
-   * :ref:`genindex`
diff --git a/Documentation/arm64/kasan-offsets.sh b/Documentation/arm64/kasan-offsets.sh
deleted file mode 100644
index 2dc5f9e18039b..0000000000000
--- a/Documentation/arm64/kasan-offsets.sh
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/sh
-
-# Print out the KASAN_SHADOW_OFFSETS required to place the KASAN SHADOW
-# start address at the top of the linear region
-
-print_kasan_offset () {
-	printf "%02d\t" $1
-	printf "0x%08x00000000\n" $(( (0xffffffff & (-1 << ($1 - 1 - 32))) \
-			- (1 << (64 - 32 - $2)) ))
-}
-
-echo KASAN_SHADOW_SCALE_SHIFT = 3
-printf "VABITS\tKASAN_SHADOW_OFFSET\n"
-print_kasan_offset 48 3
-print_kasan_offset 47 3
-print_kasan_offset 42 3
-print_kasan_offset 39 3
-print_kasan_offset 36 3
-echo
-echo KASAN_SHADOW_SCALE_SHIFT = 4
-printf "VABITS\tKASAN_SHADOW_OFFSET\n"
-print_kasan_offset 48 4
-print_kasan_offset 47 4
-print_kasan_offset 42 4
-print_kasan_offset 39 4
-print_kasan_offset 36 4
diff --git a/Documentation/arm64/legacy_instructions.rst b/Documentation/arm64/legacy_instructions.rst
deleted file mode 100644
index 54401b22cb8f9..0000000000000
--- a/Documentation/arm64/legacy_instructions.rst
+++ /dev/null
@@ -1,68 +0,0 @@
-===================
-Legacy instructions
-===================
-
-The arm64 port of the Linux kernel provides infrastructure to support
-emulation of instructions which have been deprecated, or obsoleted in
-the architecture. The infrastructure code uses undefined instruction
-hooks to support emulation. Where available it also allows turning on
-the instruction execution in hardware.
-
-The emulation mode can be controlled by writing to sysctl nodes
-(/proc/sys/abi). The following explains the different execution
-behaviours and the corresponding values of the sysctl nodes -
-
-* Undef
-    Value: 0
-
-  Generates undefined instruction abort. Default for instructions that
-  have been obsoleted in the architecture, e.g., SWP
-
-* Emulate
-    Value: 1
-
-  Uses software emulation. To aid migration of software, in this mode
-  usage of emulated instruction is traced as well as rate limited
-  warnings are issued. This is the default for deprecated
-  instructions, .e.g., CP15 barriers
-
-* Hardware Execution
-    Value: 2
-
-  Although marked as deprecated, some implementations may support the
-  enabling/disabling of hardware support for the execution of these
-  instructions. Using hardware execution generally provides better
-  performance, but at the loss of ability to gather runtime statistics
-  about the use of the deprecated instructions.
-
-The default mode depends on the status of the instruction in the
-architecture. Deprecated instructions should default to emulation
-while obsolete instructions must be undefined by default.
-
-Note: Instruction emulation may not be possible in all cases. See
-individual instruction notes for further information.
-
-Supported legacy instructions
------------------------------
-* SWP{B}
-
-:Node: /proc/sys/abi/swp
-:Status: Obsolete
-:Default: Undef (0)
-
-* CP15 Barriers
-
-:Node: /proc/sys/abi/cp15_barrier
-:Status: Deprecated
-:Default: Emulate (1)
-
-* SETEND
-
-:Node: /proc/sys/abi/setend
-:Status: Deprecated
-:Default: Emulate (1)*
-
-  Note: All the cpus on the system must have mixed endian support at EL0
-  for this feature to be enabled. If a new CPU - which doesn't support mixed
-  endian - is hotplugged in after this feature has been enabled, there could
-  be unexpected results in the application.
diff --git a/Documentation/arm64/memory-tagging-extension.rst b/Documentation/arm64/memory-tagging-extension.rst
deleted file mode 100644
index dbae47bba25ec..0000000000000
--- a/Documentation/arm64/memory-tagging-extension.rst
+++ /dev/null
@@ -1,375 +0,0 @@
-===============================================
-Memory Tagging Extension (MTE) in AArch64 Linux
-===============================================
-
-Authors: Vincenzo Frascino <vincenzo.frascino@arm.com>
-         Catalin Marinas <catalin.marinas@arm.com>
-
-Date: 2020-02-25
-
-This document describes the provision of the Memory Tagging Extension
-functionality in AArch64 Linux.
-
-Introduction
-============
-
-ARMv8.5 based processors introduce the Memory Tagging Extension (MTE)
-feature. MTE is built on top of the ARMv8.0 virtual address tagging TBI
-(Top Byte Ignore) feature and allows software to access a 4-bit
-allocation tag for each 16-byte granule in the physical address space.
-Such memory range must be mapped with the Normal-Tagged memory
-attribute. A logical tag is derived from bits 59-56 of the virtual
-address used for the memory access. A CPU with MTE enabled will compare
-the logical tag against the allocation tag and potentially raise an
-exception on mismatch, subject to system registers configuration.
-
-Userspace Support
-=================
-
-When ``CONFIG_ARM64_MTE`` is selected and Memory Tagging Extension is
-supported by the hardware, the kernel advertises the feature to
-userspace via ``HWCAP2_MTE``.
-
-PROT_MTE
---------
-
-To access the allocation tags, a user process must enable the Tagged
-memory attribute on an address range using a new ``prot`` flag for
-``mmap()`` and ``mprotect()``:
-
-``PROT_MTE`` - Pages allow access to the MTE allocation tags.
-
-The allocation tag is set to 0 when such pages are first mapped in the
-user address space and preserved on copy-on-write. ``MAP_SHARED`` is
-supported and the allocation tags can be shared between processes.
-
-**Note**: ``PROT_MTE`` is only supported on ``MAP_ANONYMOUS`` and
-RAM-based file mappings (``tmpfs``, ``memfd``). Passing it to other
-types of mapping will result in ``-EINVAL`` returned by these system
-calls.
-
-**Note**: The ``PROT_MTE`` flag (and corresponding memory type) cannot
-be cleared by ``mprotect()``.
-
-**Note**: ``madvise()`` memory ranges with ``MADV_DONTNEED`` and
-``MADV_FREE`` may have the allocation tags cleared (set to 0) at any
-point after the system call.
-
-Tag Check Faults
-----------------
-
-When ``PROT_MTE`` is enabled on an address range and a mismatch between
-the logical and allocation tags occurs on access, there are three
-configurable behaviours:
-
-- *Ignore* - This is the default mode. The CPU (and kernel) ignores the
-  tag check fault.
-
-- *Synchronous* - The kernel raises a ``SIGSEGV`` synchronously, with
-  ``.si_code = SEGV_MTESERR`` and ``.si_addr = <fault-address>``. The
-  memory access is not performed. If ``SIGSEGV`` is ignored or blocked
-  by the offending thread, the containing process is terminated with a
-  ``coredump``.
-
-- *Asynchronous* - The kernel raises a ``SIGSEGV``, in the offending
-  thread, asynchronously following one or multiple tag check faults,
-  with ``.si_code = SEGV_MTEAERR`` and ``.si_addr = 0`` (the faulting
-  address is unknown).
-
-- *Asymmetric* - Reads are handled as for synchronous mode while writes
-  are handled as for asynchronous mode.
-
-The user can select the above modes, per thread, using the
-``prctl(PR_SET_TAGGED_ADDR_CTRL, flags, 0, 0, 0)`` system call where ``flags``
-contains any number of the following values in the ``PR_MTE_TCF_MASK``
-bit-field:
-
-- ``PR_MTE_TCF_NONE``  - *Ignore* tag check faults
-                         (ignored if combined with other options)
-- ``PR_MTE_TCF_SYNC``  - *Synchronous* tag check fault mode
-- ``PR_MTE_TCF_ASYNC`` - *Asynchronous* tag check fault mode
-
-If no modes are specified, tag check faults are ignored. If a single
-mode is specified, the program will run in that mode. If multiple
-modes are specified, the mode is selected as described in the "Per-CPU
-preferred tag checking modes" section below.
-
-The current tag check fault configuration can be read using the
-``prctl(PR_GET_TAGGED_ADDR_CTRL, 0, 0, 0, 0)`` system call. If
-multiple modes were requested then all will be reported.
-
-Tag checking can also be disabled for a user thread by setting the
-``PSTATE.TCO`` bit with ``MSR TCO, #1``.
-
-**Note**: Signal handlers are always invoked with ``PSTATE.TCO = 0``,
-irrespective of the interrupted context. ``PSTATE.TCO`` is restored on
-``sigreturn()``.
-
-**Note**: There are no *match-all* logical tags available for user
-applications.
-
-**Note**: Kernel accesses to the user address space (e.g. ``read()``
-system call) are not checked if the user thread tag checking mode is
-``PR_MTE_TCF_NONE`` or ``PR_MTE_TCF_ASYNC``. If the tag checking mode is
-``PR_MTE_TCF_SYNC``, the kernel makes a best effort to check its user
-address accesses, however it cannot always guarantee it. Kernel accesses
-to user addresses are always performed with an effective ``PSTATE.TCO``
-value of zero, regardless of the user configuration.
-
-Excluding Tags in the ``IRG``, ``ADDG`` and ``SUBG`` instructions
------------------------------------------------------------------
-
-The architecture allows excluding certain tags to be randomly generated
-via the ``GCR_EL1.Exclude`` register bit-field. By default, Linux
-excludes all tags other than 0. A user thread can enable specific tags
-in the randomly generated set using the ``prctl(PR_SET_TAGGED_ADDR_CTRL,
-flags, 0, 0, 0)`` system call where ``flags`` contains the tags bitmap
-in the ``PR_MTE_TAG_MASK`` bit-field.
-
-**Note**: The hardware uses an exclude mask but the ``prctl()``
-interface provides an include mask. An include mask of ``0`` (exclusion
-mask ``0xffff``) results in the CPU always generating tag ``0``.
-
-Per-CPU preferred tag checking mode
------------------------------------
-
-On some CPUs the performance of MTE in stricter tag checking modes
-is similar to that of less strict tag checking modes. This makes it
-worthwhile to enable stricter checks on those CPUs when a less strict
-checking mode is requested, in order to gain the error detection
-benefits of the stricter checks without the performance downsides. To
-support this scenario, a privileged user may configure a stricter
-tag checking mode as the CPU's preferred tag checking mode.
-
-The preferred tag checking mode for each CPU is controlled by
-``/sys/devices/system/cpu/cpu<N>/mte_tcf_preferred``, to which a
-privileged user may write the value ``async``, ``sync`` or ``asymm``.  The
-default preferred mode for each CPU is ``async``.
-
-To allow a program to potentially run in the CPU's preferred tag
-checking mode, the user program may set multiple tag check fault mode
-bits in the ``flags`` argument to the ``prctl(PR_SET_TAGGED_ADDR_CTRL,
-flags, 0, 0, 0)`` system call. If both synchronous and asynchronous
-modes are requested then asymmetric mode may also be selected by the
-kernel. If the CPU's preferred tag checking mode is in the task's set
-of provided tag checking modes, that mode will be selected. Otherwise,
-one of the modes in the task's mode will be selected by the kernel
-from the task's mode set using the preference order:
-
-	1. Asynchronous
-	2. Asymmetric
-	3. Synchronous
-
-Note that there is no way for userspace to request multiple modes and
-also disable asymmetric mode.
-
-Initial process state
----------------------
-
-On ``execve()``, the new process has the following configuration:
-
-- ``PR_TAGGED_ADDR_ENABLE`` set to 0 (disabled)
-- No tag checking modes are selected (tag check faults ignored)
-- ``PR_MTE_TAG_MASK`` set to 0 (all tags excluded)
-- ``PSTATE.TCO`` set to 0
-- ``PROT_MTE`` not set on any of the initial memory maps
-
-On ``fork()``, the new process inherits the parent's configuration and
-memory map attributes with the exception of the ``madvise()`` ranges
-with ``MADV_WIPEONFORK`` which will have the data and tags cleared (set
-to 0).
-
-The ``ptrace()`` interface
---------------------------
-
-``PTRACE_PEEKMTETAGS`` and ``PTRACE_POKEMTETAGS`` allow a tracer to read
-the tags from or set the tags to a tracee's address space. The
-``ptrace()`` system call is invoked as ``ptrace(request, pid, addr,
-data)`` where:
-
-- ``request`` - one of ``PTRACE_PEEKMTETAGS`` or ``PTRACE_POKEMTETAGS``.
-- ``pid`` - the tracee's PID.
-- ``addr`` - address in the tracee's address space.
-- ``data`` - pointer to a ``struct iovec`` where ``iov_base`` points to
-  a buffer of ``iov_len`` length in the tracer's address space.
-
-The tags in the tracer's ``iov_base`` buffer are represented as one
-4-bit tag per byte and correspond to a 16-byte MTE tag granule in the
-tracee's address space.
-
-**Note**: If ``addr`` is not aligned to a 16-byte granule, the kernel
-will use the corresponding aligned address.
-
-``ptrace()`` return value:
-
-- 0 - tags were copied, the tracer's ``iov_len`` was updated to the
-  number of tags transferred. This may be smaller than the requested
-  ``iov_len`` if the requested address range in the tracee's or the
-  tracer's space cannot be accessed or does not have valid tags.
-- ``-EPERM`` - the specified process cannot be traced.
-- ``-EIO`` - the tracee's address range cannot be accessed (e.g. invalid
-  address) and no tags copied. ``iov_len`` not updated.
-- ``-EFAULT`` - fault on accessing the tracer's memory (``struct iovec``
-  or ``iov_base`` buffer) and no tags copied. ``iov_len`` not updated.
-- ``-EOPNOTSUPP`` - the tracee's address does not have valid tags (never
-  mapped with the ``PROT_MTE`` flag). ``iov_len`` not updated.
-
-**Note**: There are no transient errors for the requests above, so user
-programs should not retry in case of a non-zero system call return.
-
-``PTRACE_GETREGSET`` and ``PTRACE_SETREGSET`` with ``addr ==
-``NT_ARM_TAGGED_ADDR_CTRL`` allow ``ptrace()`` access to the tagged
-address ABI control and MTE configuration of a process as per the
-``prctl()`` options described in
-Documentation/arm64/tagged-address-abi.rst and above. The corresponding
-``regset`` is 1 element of 8 bytes (``sizeof(long))``).
-
-Core dump support
------------------
-
-The allocation tags for user memory mapped with ``PROT_MTE`` are dumped
-in the core file as additional ``PT_AARCH64_MEMTAG_MTE`` segments. The
-program header for such segment is defined as:
-
-:``p_type``: ``PT_AARCH64_MEMTAG_MTE``
-:``p_flags``: 0
-:``p_offset``: segment file offset
-:``p_vaddr``: segment virtual address, same as the corresponding
-  ``PT_LOAD`` segment
-:``p_paddr``: 0
-:``p_filesz``: segment size in file, calculated as ``p_mem_sz / 32``
-  (two 4-bit tags cover 32 bytes of memory)
-:``p_memsz``: segment size in memory, same as the corresponding
-  ``PT_LOAD`` segment
-:``p_align``: 0
-
-The tags are stored in the core file at ``p_offset`` as two 4-bit tags
-in a byte. With the tag granule of 16 bytes, a 4K page requires 128
-bytes in the core file.
-
-Example of correct usage
-========================
-
-*MTE Example code*
-
-.. code-block:: c
-
-    /*
-     * To be compiled with -march=armv8.5-a+memtag
-     */
-    #include <errno.h>
-    #include <stdint.h>
-    #include <stdio.h>
-    #include <stdlib.h>
-    #include <unistd.h>
-    #include <sys/auxv.h>
-    #include <sys/mman.h>
-    #include <sys/prctl.h>
-
-    /*
-     * From arch/arm64/include/uapi/asm/hwcap.h
-     */
-    #define HWCAP2_MTE              (1 << 18)
-
-    /*
-     * From arch/arm64/include/uapi/asm/mman.h
-     */
-    #define PROT_MTE                 0x20
-
-    /*
-     * From include/uapi/linux/prctl.h
-     */
-    #define PR_SET_TAGGED_ADDR_CTRL 55
-    #define PR_GET_TAGGED_ADDR_CTRL 56
-    # define PR_TAGGED_ADDR_ENABLE  (1UL << 0)
-    # define PR_MTE_TCF_SHIFT       1
-    # define PR_MTE_TCF_NONE        (0UL << PR_MTE_TCF_SHIFT)
-    # define PR_MTE_TCF_SYNC        (1UL << PR_MTE_TCF_SHIFT)
-    # define PR_MTE_TCF_ASYNC       (2UL << PR_MTE_TCF_SHIFT)
-    # define PR_MTE_TCF_MASK        (3UL << PR_MTE_TCF_SHIFT)
-    # define PR_MTE_TAG_SHIFT       3
-    # define PR_MTE_TAG_MASK        (0xffffUL << PR_MTE_TAG_SHIFT)
-
-    /*
-     * Insert a random logical tag into the given pointer.
-     */
-    #define insert_random_tag(ptr) ({                       \
-            uint64_t __val;                                 \
-            asm("irg %0, %1" : "=r" (__val) : "r" (ptr));   \
-            __val;                                          \
-    })
-
-    /*
-     * Set the allocation tag on the destination address.
-     */
-    #define set_tag(tagged_addr) do {                                      \
-            asm volatile("stg %0, [%0]" : : "r" (tagged_addr) : "memory"); \
-    } while (0)
-
-    int main()
-    {
-            unsigned char *a;
-            unsigned long page_sz = sysconf(_SC_PAGESIZE);
-            unsigned long hwcap2 = getauxval(AT_HWCAP2);
-
-            /* check if MTE is present */
-            if (!(hwcap2 & HWCAP2_MTE))
-                    return EXIT_FAILURE;
-
-            /*
-             * Enable the tagged address ABI, synchronous or asynchronous MTE
-             * tag check faults (based on per-CPU preference) and allow all
-             * non-zero tags in the randomly generated set.
-             */
-            if (prctl(PR_SET_TAGGED_ADDR_CTRL,
-                      PR_TAGGED_ADDR_ENABLE | PR_MTE_TCF_SYNC | PR_MTE_TCF_ASYNC |
-                      (0xfffe << PR_MTE_TAG_SHIFT),
-                      0, 0, 0)) {
-                    perror("prctl() failed");
-                    return EXIT_FAILURE;
-            }
-
-            a = mmap(0, page_sz, PROT_READ | PROT_WRITE,
-                     MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-            if (a == MAP_FAILED) {
-                    perror("mmap() failed");
-                    return EXIT_FAILURE;
-            }
-
-            /*
-             * Enable MTE on the above anonymous mmap. The flag could be passed
-             * directly to mmap() and skip this step.
-             */
-            if (mprotect(a, page_sz, PROT_READ | PROT_WRITE | PROT_MTE)) {
-                    perror("mprotect() failed");
-                    return EXIT_FAILURE;
-            }
-
-            /* access with the default tag (0) */
-            a[0] = 1;
-            a[1] = 2;
-
-            printf("a[0] = %hhu a[1] = %hhu\n", a[0], a[1]);
-
-            /* set the logical and allocation tags */
-            a = (unsigned char *)insert_random_tag(a);
-            set_tag(a);
-
-            printf("%p\n", a);
-
-            /* non-zero tag access */
-            a[0] = 3;
-            printf("a[0] = %hhu a[1] = %hhu\n", a[0], a[1]);
-
-            /*
-             * If MTE is enabled correctly the next instruction will generate an
-             * exception.
-             */
-            printf("Expecting SIGSEGV...\n");
-            a[16] = 0xdd;
-
-            /* this should not be printed in the PR_MTE_TCF_SYNC mode */
-            printf("...haven't got one\n");
-
-            return EXIT_FAILURE;
-    }
diff --git a/Documentation/arm64/memory.rst b/Documentation/arm64/memory.rst
deleted file mode 100644
index 2a641ba7be3b7..0000000000000
--- a/Documentation/arm64/memory.rst
+++ /dev/null
@@ -1,167 +0,0 @@
-==============================
-Memory Layout on AArch64 Linux
-==============================
-
-Author: Catalin Marinas <catalin.marinas@arm.com>
-
-This document describes the virtual memory layout used by the AArch64
-Linux kernel. The architecture allows up to 4 levels of translation
-tables with a 4KB page size and up to 3 levels with a 64KB page size.
-
-AArch64 Linux uses either 3 levels or 4 levels of translation tables
-with the 4KB page configuration, allowing 39-bit (512GB) or 48-bit
-(256TB) virtual addresses, respectively, for both user and kernel. With
-64KB pages, only 2 levels of translation tables, allowing 42-bit (4TB)
-virtual address, are used but the memory layout is the same.
-
-ARMv8.2 adds optional support for Large Virtual Address space. This is
-only available when running with a 64KB page size and expands the
-number of descriptors in the first level of translation.
-
-User addresses have bits 63:48 set to 0 while the kernel addresses have
-the same bits set to 1. TTBRx selection is given by bit 63 of the
-virtual address. The swapper_pg_dir contains only kernel (global)
-mappings while the user pgd contains only user (non-global) mappings.
-The swapper_pg_dir address is written to TTBR1 and never written to
-TTBR0.
-
-
-AArch64 Linux memory layout with 4KB pages + 4 levels (48-bit)::
-
-  Start			End			Size		Use
-  -----------------------------------------------------------------------
-  0000000000000000	0000ffffffffffff	 256TB		user
-  ffff000000000000	ffff7fffffffffff	 128TB		kernel logical memory map
- [ffff600000000000	ffff7fffffffffff]	  32TB		[kasan shadow region]
-  ffff800000000000	ffff800007ffffff	 128MB		modules
-  ffff800008000000	fffffbffefffffff	 124TB		vmalloc
-  fffffbfff0000000	fffffbfffdffffff	 224MB		fixed mappings (top down)
-  fffffbfffe000000	fffffbfffe7fffff	   8MB		[guard region]
-  fffffbfffe800000	fffffbffff7fffff	  16MB		PCI I/O space
-  fffffbffff800000	fffffbffffffffff	   8MB		[guard region]
-  fffffc0000000000	fffffdffffffffff	   2TB		vmemmap
-  fffffe0000000000	ffffffffffffffff	   2TB		[guard region]
-
-
-AArch64 Linux memory layout with 64KB pages + 3 levels (52-bit with HW support)::
-
-  Start			End			Size		Use
-  -----------------------------------------------------------------------
-  0000000000000000	000fffffffffffff	   4PB		user
-  fff0000000000000	ffff7fffffffffff	  ~4PB		kernel logical memory map
- [fffd800000000000	ffff7fffffffffff]	 512TB		[kasan shadow region]
-  ffff800000000000	ffff800007ffffff	 128MB		modules
-  ffff800008000000	fffffbffefffffff	 124TB		vmalloc
-  fffffbfff0000000	fffffbfffdffffff	 224MB		fixed mappings (top down)
-  fffffbfffe000000	fffffbfffe7fffff	   8MB		[guard region]
-  fffffbfffe800000	fffffbffff7fffff	  16MB		PCI I/O space
-  fffffbffff800000	fffffbffffffffff	   8MB		[guard region]
-  fffffc0000000000	ffffffdfffffffff	  ~4TB		vmemmap
-  ffffffe000000000	ffffffffffffffff	 128GB		[guard region]
-
-
-Translation table lookup with 4KB pages::
-
-  +--------+--------+--------+--------+--------+--------+--------+--------+
-  |63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
-  +--------+--------+--------+--------+--------+--------+--------+--------+
-   |                 |         |         |         |         |
-   |                 |         |         |         |         v
-   |                 |         |         |         |   [11:0]  in-page offset
-   |                 |         |         |         +-> [20:12] L3 index
-   |                 |         |         +-----------> [29:21] L2 index
-   |                 |         +---------------------> [38:30] L1 index
-   |                 +-------------------------------> [47:39] L0 index
-   +-------------------------------------------------> [63] TTBR0/1
-
-
-Translation table lookup with 64KB pages::
-
-  +--------+--------+--------+--------+--------+--------+--------+--------+
-  |63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
-  +--------+--------+--------+--------+--------+--------+--------+--------+
-   |                 |    |               |              |
-   |                 |    |               |              v
-   |                 |    |               |            [15:0]  in-page offset
-   |                 |    |               +----------> [28:16] L3 index
-   |                 |    +--------------------------> [41:29] L2 index
-   |                 +-------------------------------> [47:42] L1 index (48-bit)
-   |                                                   [51:42] L1 index (52-bit)
-   +-------------------------------------------------> [63] TTBR0/1
-
-
-When using KVM without the Virtualization Host Extensions, the
-hypervisor maps kernel pages in EL2 at a fixed (and potentially
-random) offset from the linear mapping. See the kern_hyp_va macro and
-kvm_update_va_mask function for more details. MMIO devices such as
-GICv2 gets mapped next to the HYP idmap page, as do vectors when
-ARM64_SPECTRE_V3A is enabled for particular CPUs.
-
-When using KVM with the Virtualization Host Extensions, no additional
-mappings are created, since the host kernel runs directly in EL2.
-
-52-bit VA support in the kernel
--------------------------------
-If the ARMv8.2-LVA optional feature is present, and we are running
-with a 64KB page size; then it is possible to use 52-bits of address
-space for both userspace and kernel addresses. However, any kernel
-binary that supports 52-bit must also be able to fall back to 48-bit
-at early boot time if the hardware feature is not present.
-
-This fallback mechanism necessitates the kernel .text to be in the
-higher addresses such that they are invariant to 48/52-bit VAs. Due
-to the kasan shadow being a fraction of the entire kernel VA space,
-the end of the kasan shadow must also be in the higher half of the
-kernel VA space for both 48/52-bit. (Switching from 48-bit to 52-bit,
-the end of the kasan shadow is invariant and dependent on ~0UL,
-whilst the start address will "grow" towards the lower addresses).
-
-In order to optimise phys_to_virt and virt_to_phys, the PAGE_OFFSET
-is kept constant at 0xFFF0000000000000 (corresponding to 52-bit),
-this obviates the need for an extra variable read. The physvirt
-offset and vmemmap offsets are computed at early boot to enable
-this logic.
-
-As a single binary will need to support both 48-bit and 52-bit VA
-spaces, the VMEMMAP must be sized large enough for 52-bit VAs and
-also must be sized large enough to accommodate a fixed PAGE_OFFSET.
-
-Most code in the kernel should not need to consider the VA_BITS, for
-code that does need to know the VA size the variables are
-defined as follows:
-
-VA_BITS		constant	the *maximum* VA space size
-
-VA_BITS_MIN	constant	the *minimum* VA space size
-
-vabits_actual	variable	the *actual* VA space size
-
-
-Maximum and minimum sizes can be useful to ensure that buffers are
-sized large enough or that addresses are positioned close enough for
-the "worst" case.
-
-52-bit userspace VAs
---------------------
-To maintain compatibility with software that relies on the ARMv8.0
-VA space maximum size of 48-bits, the kernel will, by default,
-return virtual addresses to userspace from a 48-bit range.
-
-Software can "opt-in" to receiving VAs from a 52-bit space by
-specifying an mmap hint parameter that is larger than 48-bit.
-
-For example:
-
-.. code-block:: c
-
-   maybe_high_address = mmap(~0UL, size, prot, flags,...);
-
-It is also possible to build a debug kernel that returns addresses
-from a 52-bit space by enabling the following kernel config options:
-
-.. code-block:: sh
-
-   CONFIG_EXPERT=y && CONFIG_ARM64_FORCE_52BIT=y
-
-Note that this option is only intended for debugging applications
-and should not be used in production.
diff --git a/Documentation/arm64/perf.rst b/Documentation/arm64/perf.rst
deleted file mode 100644
index 1f87b57c23324..0000000000000
--- a/Documentation/arm64/perf.rst
+++ /dev/null
@@ -1,166 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. _perf_index:
-
-====
-Perf
-====
-
-Perf Event Attributes
-=====================
-
-:Author: Andrew Murray <andrew.murray@arm.com>
-:Date: 2019-03-06
-
-exclude_user
-------------
-
-This attribute excludes userspace.
-
-Userspace always runs at EL0 and thus this attribute will exclude EL0.
-
-
-exclude_kernel
---------------
-
-This attribute excludes the kernel.
-
-The kernel runs at EL2 with VHE and EL1 without. Guest kernels always run
-at EL1.
-
-For the host this attribute will exclude EL1 and additionally EL2 on a VHE
-system.
-
-For the guest this attribute will exclude EL1. Please note that EL2 is
-never counted within a guest.
-
-
-exclude_hv
-----------
-
-This attribute excludes the hypervisor.
-
-For a VHE host this attribute is ignored as we consider the host kernel to
-be the hypervisor.
-
-For a non-VHE host this attribute will exclude EL2 as we consider the
-hypervisor to be any code that runs at EL2 which is predominantly used for
-guest/host transitions.
-
-For the guest this attribute has no effect. Please note that EL2 is
-never counted within a guest.
-
-
-exclude_host / exclude_guest
-----------------------------
-
-These attributes exclude the KVM host and guest, respectively.
-
-The KVM host may run at EL0 (userspace), EL1 (non-VHE kernel) and EL2 (VHE
-kernel or non-VHE hypervisor).
-
-The KVM guest may run at EL0 (userspace) and EL1 (kernel).
-
-Due to the overlapping exception levels between host and guests we cannot
-exclusively rely on the PMU's hardware exception filtering - therefore we
-must enable/disable counting on the entry and exit to the guest. This is
-performed differently on VHE and non-VHE systems.
-
-For non-VHE systems we exclude EL2 for exclude_host - upon entering and
-exiting the guest we disable/enable the event as appropriate based on the
-exclude_host and exclude_guest attributes.
-
-For VHE systems we exclude EL1 for exclude_guest and exclude both EL0,EL2
-for exclude_host. Upon entering and exiting the guest we modify the event
-to include/exclude EL0 as appropriate based on the exclude_host and
-exclude_guest attributes.
-
-The statements above also apply when these attributes are used within a
-non-VHE guest however please note that EL2 is never counted within a guest.
-
-
-Accuracy
---------
-
-On non-VHE hosts we enable/disable counters on the entry/exit of host/guest
-transition at EL2 - however there is a period of time between
-enabling/disabling the counters and entering/exiting the guest. We are
-able to eliminate counters counting host events on the boundaries of guest
-entry/exit when counting guest events by filtering out EL2 for
-exclude_host. However when using !exclude_hv there is a small blackout
-window at the guest entry/exit where host events are not captured.
-
-On VHE systems there are no blackout windows.
-
-Perf Userspace PMU Hardware Counter Access
-==========================================
-
-Overview
---------
-The perf userspace tool relies on the PMU to monitor events. It offers an
-abstraction layer over the hardware counters since the underlying
-implementation is cpu-dependent.
-Arm64 allows userspace tools to have access to the registers storing the
-hardware counters' values directly.
-
-This targets specifically self-monitoring tasks in order to reduce the overhead
-by directly accessing the registers without having to go through the kernel.
-
-How-to
-------
-The focus is set on the armv8 PMUv3 which makes sure that the access to the pmu
-registers is enabled and that the userspace has access to the relevant
-information in order to use them.
-
-In order to have access to the hardware counters, the global sysctl
-kernel/perf_user_access must first be enabled:
-
-.. code-block:: sh
-
-  echo 1 > /proc/sys/kernel/perf_user_access
-
-It is necessary to open the event using the perf tool interface with config1:1
-attr bit set: the sys_perf_event_open syscall returns a fd which can
-subsequently be used with the mmap syscall in order to retrieve a page of memory
-containing information about the event. The PMU driver uses this page to expose
-to the user the hardware counter's index and other necessary data. Using this
-index enables the user to access the PMU registers using the `mrs` instruction.
-Access to the PMU registers is only valid while the sequence lock is unchanged.
-In particular, the PMSELR_EL0 register is zeroed each time the sequence lock is
-changed.
-
-The userspace access is supported in libperf using the perf_evsel__mmap()
-and perf_evsel__read() functions. See `tools/lib/perf/tests/test-evsel.c`_ for
-an example.
-
-About heterogeneous systems
----------------------------
-On heterogeneous systems such as big.LITTLE, userspace PMU counter access can
-only be enabled when the tasks are pinned to a homogeneous subset of cores and
-the corresponding PMU instance is opened by specifying the 'type' attribute.
-The use of generic event types is not supported in this case.
-
-Have a look at `tools/perf/arch/arm64/tests/user-events.c`_ for an example. It
-can be run using the perf tool to check that the access to the registers works
-correctly from userspace:
-
-.. code-block:: sh
-
-  perf test -v user
-
-About chained events and counter sizes
---------------------------------------
-The user can request either a 32-bit (config1:0 == 0) or 64-bit (config1:0 == 1)
-counter along with userspace access. The sys_perf_event_open syscall will fail
-if a 64-bit counter is requested and the hardware doesn't support 64-bit
-counters. Chained events are not supported in conjunction with userspace counter
-access. If a 32-bit counter is requested on hardware with 64-bit counters, then
-userspace must treat the upper 32-bits read from the counter as UNKNOWN. The
-'pmc_width' field in the user page will indicate the valid width of the counter
-and should be used to mask the upper bits as needed.
-
-.. Links
-.. _tools/perf/arch/arm64/tests/user-events.c:
-   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/perf/arch/arm64/tests/user-events.c
-.. _tools/lib/perf/tests/test-evsel.c:
-   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/lib/perf/tests/test-evsel.c
diff --git a/Documentation/arm64/pointer-authentication.rst b/Documentation/arm64/pointer-authentication.rst
deleted file mode 100644
index e5dad2e40aa89..0000000000000
--- a/Documentation/arm64/pointer-authentication.rst
+++ /dev/null
@@ -1,142 +0,0 @@
-=======================================
-Pointer authentication in AArch64 Linux
-=======================================
-
-Author: Mark Rutland <mark.rutland@arm.com>
-
-Date: 2017-07-19
-
-This document briefly describes the provision of pointer authentication
-functionality in AArch64 Linux.
-
-
-Architecture overview
----------------------
-
-The ARMv8.3 Pointer Authentication extension adds primitives that can be
-used to mitigate certain classes of attack where an attacker can corrupt
-the contents of some memory (e.g. the stack).
-
-The extension uses a Pointer Authentication Code (PAC) to determine
-whether pointers have been modified unexpectedly. A PAC is derived from
-a pointer, another value (such as the stack pointer), and a secret key
-held in system registers.
-
-The extension adds instructions to insert a valid PAC into a pointer,
-and to verify/remove the PAC from a pointer. The PAC occupies a number
-of high-order bits of the pointer, which varies dependent on the
-configured virtual address size and whether pointer tagging is in use.
-
-A subset of these instructions have been allocated from the HINT
-encoding space. In the absence of the extension (or when disabled),
-these instructions behave as NOPs. Applications and libraries using
-these instructions operate correctly regardless of the presence of the
-extension.
-
-The extension provides five separate keys to generate PACs - two for
-instruction addresses (APIAKey, APIBKey), two for data addresses
-(APDAKey, APDBKey), and one for generic authentication (APGAKey).
-
-
-Basic support
--------------
-
-When CONFIG_ARM64_PTR_AUTH is selected, and relevant HW support is
-present, the kernel will assign random key values to each process at
-exec*() time. The keys are shared by all threads within the process, and
-are preserved across fork().
-
-Presence of address authentication functionality is advertised via
-HWCAP_PACA, and generic authentication functionality via HWCAP_PACG.
-
-The number of bits that the PAC occupies in a pointer is 55 minus the
-virtual address size configured by the kernel. For example, with a
-virtual address size of 48, the PAC is 7 bits wide.
-
-When ARM64_PTR_AUTH_KERNEL is selected, the kernel will be compiled
-with HINT space pointer authentication instructions protecting
-function returns. Kernels built with this option will work on hardware
-with or without pointer authentication support.
-
-In addition to exec(), keys can also be reinitialized to random values
-using the PR_PAC_RESET_KEYS prctl. A bitmask of PR_PAC_APIAKEY,
-PR_PAC_APIBKEY, PR_PAC_APDAKEY, PR_PAC_APDBKEY and PR_PAC_APGAKEY
-specifies which keys are to be reinitialized; specifying 0 means "all
-keys".
-
-
-Debugging
----------
-
-When CONFIG_ARM64_PTR_AUTH is selected, and HW support for address
-authentication is present, the kernel will expose the position of TTBR0
-PAC bits in the NT_ARM_PAC_MASK regset (struct user_pac_mask), which
-userspace can acquire via PTRACE_GETREGSET.
-
-The regset is exposed only when HWCAP_PACA is set. Separate masks are
-exposed for data pointers and instruction pointers, as the set of PAC
-bits can vary between the two. Note that the masks apply to TTBR0
-addresses, and are not valid to apply to TTBR1 addresses (e.g. kernel
-pointers).
-
-Additionally, when CONFIG_CHECKPOINT_RESTORE is also set, the kernel
-will expose the NT_ARM_PACA_KEYS and NT_ARM_PACG_KEYS regsets (struct
-user_pac_address_keys and struct user_pac_generic_keys). These can be
-used to get and set the keys for a thread.
-
-
-Virtualization
---------------
-
-Pointer authentication is enabled in KVM guest when each virtual cpu is
-initialised by passing flags KVM_ARM_VCPU_PTRAUTH_[ADDRESS/GENERIC] and
-requesting these two separate cpu features to be enabled. The current KVM
-guest implementation works by enabling both features together, so both
-these userspace flags are checked before enabling pointer authentication.
-The separate userspace flag will allow to have no userspace ABI changes
-if support is added in the future to allow these two features to be
-enabled independently of one another.
-
-As Arm Architecture specifies that Pointer Authentication feature is
-implemented along with the VHE feature so KVM arm64 ptrauth code relies
-on VHE mode to be present.
-
-Additionally, when these vcpu feature flags are not set then KVM will
-filter out the Pointer Authentication system key registers from
-KVM_GET/SET_REG_* ioctls and mask those features from cpufeature ID
-register. Any attempt to use the Pointer Authentication instructions will
-result in an UNDEFINED exception being injected into the guest.
-
-
-Enabling and disabling keys
----------------------------
-
-The prctl PR_PAC_SET_ENABLED_KEYS allows the user program to control which
-PAC keys are enabled in a particular task. It takes two arguments, the
-first being a bitmask of PR_PAC_APIAKEY, PR_PAC_APIBKEY, PR_PAC_APDAKEY
-and PR_PAC_APDBKEY specifying which keys shall be affected by this prctl,
-and the second being a bitmask of the same bits specifying whether the key
-should be enabled or disabled. For example::
-
-  prctl(PR_PAC_SET_ENABLED_KEYS,
-        PR_PAC_APIAKEY | PR_PAC_APIBKEY | PR_PAC_APDAKEY | PR_PAC_APDBKEY,
-        PR_PAC_APIBKEY, 0, 0);
-
-disables all keys except the IB key.
-
-The main reason why this is useful is to enable a userspace ABI that uses PAC
-instructions to sign and authenticate function pointers and other pointers
-exposed outside of the function, while still allowing binaries conforming to
-the ABI to interoperate with legacy binaries that do not sign or authenticate
-pointers.
-
-The idea is that a dynamic loader or early startup code would issue this
-prctl very early after establishing that a process may load legacy binaries,
-but before executing any PAC instructions.
-
-For compatibility with previous kernel versions, processes start up with IA,
-IB, DA and DB enabled, and are reset to this state on exec(). Processes created
-via fork() and clone() inherit the key enabled state from the calling process.
-
-It is recommended to avoid disabling the IA key, as this has higher performance
-overhead than disabling any of the other keys.
diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
deleted file mode 100644
index 9e311bc43e05e..0000000000000
--- a/Documentation/arm64/silicon-errata.rst
+++ /dev/null
@@ -1,216 +0,0 @@
-=======================================
-Silicon Errata and Software Workarounds
-=======================================
-
-Author: Will Deacon <will.deacon@arm.com>
-
-Date  : 27 November 2015
-
-It is an unfortunate fact of life that hardware is often produced with
-so-called "errata", which can cause it to deviate from the architecture
-under specific circumstances.  For hardware produced by ARM, these
-errata are broadly classified into the following categories:
-
-  ==========  ========================================================
-  Category A  A critical error without a viable workaround.
-  Category B  A significant or critical error with an acceptable
-              workaround.
-  Category C  A minor error that is not expected to occur under normal
-              operation.
-  ==========  ========================================================
-
-For more information, consult one of the "Software Developers Errata
-Notice" documents available on infocenter.arm.com (registration
-required).
-
-As far as Linux is concerned, Category B errata may require some special
-treatment in the operating system. For example, avoiding a particular
-sequence of code, or configuring the processor in a particular way. A
-less common situation may require similar actions in order to declassify
-a Category A erratum into a Category C erratum. These are collectively
-known as "software workarounds" and are only required in the minority of
-cases (e.g. those cases that both require a non-secure workaround *and*
-can be triggered by Linux).
-
-For software workarounds that may adversely impact systems unaffected by
-the erratum in question, a Kconfig entry is added under "Kernel
-Features" -> "ARM errata workarounds via the alternatives framework".
-These are enabled by default and patched in at runtime when an affected
-CPU is detected. For less-intrusive workarounds, a Kconfig option is not
-available and the code is structured (preferably with a comment) in such
-a way that the erratum will not be hit.
-
-This approach can make it slightly onerous to determine exactly which
-errata are worked around in an arbitrary kernel source tree, so this
-file acts as a registry of software workarounds in the Linux Kernel and
-will be updated when new workarounds are committed and backported to
-stable kernels.
-
-+----------------+-----------------+-----------------+-----------------------------+
-| Implementor    | Component       | Erratum ID      | Kconfig                     |
-+================+=================+=================+=============================+
-| Allwinner      | A64/R18         | UNKNOWN1        | SUN50I_ERRATUM_UNKNOWN1     |
-+----------------+-----------------+-----------------+-----------------------------+
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A510     | #2064142        | ARM64_ERRATUM_2064142       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A510     | #2038923        | ARM64_ERRATUM_2038923       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A510     | #1902691        | ARM64_ERRATUM_1902691       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319        |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A53      | #824069         | ARM64_ERRATUM_824069        |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A53      | #819472         | ARM64_ERRATUM_819472        |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A53      | #845719         | ARM64_ERRATUM_845719        |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A53      | #843419         | ARM64_ERRATUM_843419        |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A55      | #1530923        | ARM64_ERRATUM_1530923       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A55      | #2441007        | ARM64_ERRATUM_2441007       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075        |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A57      | #852523         | N/A                         |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220        |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A57      | #1319537        | ARM64_ERRATUM_1319367       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A57      | #1742098        | ARM64_ERRATUM_1742098       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A72      | #853709         | N/A                         |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A72      | #1319367        | ARM64_ERRATUM_1319367       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A72      | #1655431        | ARM64_ERRATUM_1742098       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A76      | #1188873,1418040| ARM64_ERRATUM_1418040       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A76      | #1165522        | ARM64_ERRATUM_1165522       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A76      | #1286807        | ARM64_ERRATUM_1286807       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A76      | #1463225        | ARM64_ERRATUM_1463225       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A510     | #2051678        | ARM64_ERRATUM_2051678       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A510     | #2077057        | ARM64_ERRATUM_2077057       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A510     | #2441009        | ARM64_ERRATUM_2441009       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A510     | #2658417        | ARM64_ERRATUM_2658417       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A710     | #2224489        | ARM64_ERRATUM_2224489       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-A715     | #2645198        | ARM64_ERRATUM_2645198       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-X2       | #2119858        | ARM64_ERRATUM_2119858       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Cortex-X2       | #2224489        | ARM64_ERRATUM_2224489       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Neoverse-N1     | #1349291        | N/A                         |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Neoverse-N1     | #1542419        | ARM64_ERRATUM_1542419       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Neoverse-N2     | #2139208        | ARM64_ERRATUM_2139208       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Neoverse-N2     | #2067961        | ARM64_ERRATUM_2067961       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | Neoverse-N2     | #2253138        | ARM64_ERRATUM_2253138       |
-+----------------+-----------------+-----------------+-----------------------------+
-| ARM            | MMU-500         | #841119,826419  | N/A                         |
-+----------------+-----------------+-----------------+-----------------------------+
-+----------------+-----------------+-----------------+-----------------------------+
-| Broadcom       | Brahma-B53      | N/A             | ARM64_ERRATUM_845719        |
-+----------------+-----------------+-----------------+-----------------------------+
-| Broadcom       | Brahma-B53      | N/A             | ARM64_ERRATUM_843419        |
-+----------------+-----------------+-----------------+-----------------------------+
-+----------------+-----------------+-----------------+-----------------------------+
-| Cavium         | ThunderX ITS    | #22375,24313    | CAVIUM_ERRATUM_22375        |
-+----------------+-----------------+-----------------+-----------------------------+
-| Cavium         | ThunderX ITS    | #23144          | CAVIUM_ERRATUM_23144        |
-+----------------+-----------------+-----------------+-----------------------------+
-| Cavium         | ThunderX GICv3  | #23154,38545    | CAVIUM_ERRATUM_23154        |
-+----------------+-----------------+-----------------+-----------------------------+
-| Cavium         | ThunderX GICv3  | #38539          | N/A                         |
-+----------------+-----------------+-----------------+-----------------------------+
-| Cavium         | ThunderX Core   | #27456          | CAVIUM_ERRATUM_27456        |
-+----------------+-----------------+-----------------+-----------------------------+
-| Cavium         | ThunderX Core   | #30115          | CAVIUM_ERRATUM_30115        |
-+----------------+-----------------+-----------------+-----------------------------+
-| Cavium         | ThunderX SMMUv2 | #27704          | N/A                         |
-+----------------+-----------------+-----------------+-----------------------------+
-| Cavium         | ThunderX2 SMMUv3| #74             | N/A                         |
-+----------------+-----------------+-----------------+-----------------------------+
-| Cavium         | ThunderX2 SMMUv3| #126            | N/A                         |
-+----------------+-----------------+-----------------+-----------------------------+
-| Cavium         | ThunderX2 Core  | #219            | CAVIUM_TX2_ERRATUM_219      |
-+----------------+-----------------+-----------------+-----------------------------+
-+----------------+-----------------+-----------------+-----------------------------+
-| Marvell        | ARM-MMU-500     | #582743         | N/A                         |
-+----------------+-----------------+-----------------+-----------------------------+
-+----------------+-----------------+-----------------+-----------------------------+
-| NVIDIA         | Carmel Core     | N/A             | NVIDIA_CARMEL_CNP_ERRATUM   |
-+----------------+-----------------+-----------------+-----------------------------+
-| NVIDIA         | T241 GICv3/4.x  | T241-FABRIC-4   | N/A                         |
-+----------------+-----------------+-----------------+-----------------------------+
-+----------------+-----------------+-----------------+-----------------------------+
-| Freescale/NXP  | LS2080A/LS1043A | A-008585        | FSL_ERRATUM_A008585         |
-+----------------+-----------------+-----------------+-----------------------------+
-+----------------+-----------------+-----------------+-----------------------------+
-| Hisilicon      | Hip0{5,6,7}     | #161010101      | HISILICON_ERRATUM_161010101 |
-+----------------+-----------------+-----------------+-----------------------------+
-| Hisilicon      | Hip0{6,7}       | #161010701      | N/A                         |
-+----------------+-----------------+-----------------+-----------------------------+
-| Hisilicon      | Hip0{6,7}       | #161010803      | N/A                         |
-+----------------+-----------------+-----------------+-----------------------------+
-| Hisilicon      | Hip07           | #161600802      | HISILICON_ERRATUM_161600802 |
-+----------------+-----------------+-----------------+-----------------------------+
-| Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
-+----------------+-----------------+-----------------+-----------------------------+
-+----------------+-----------------+-----------------+-----------------------------+
-| Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
-+----------------+-----------------+-----------------+-----------------------------+
-| Qualcomm Tech. | Kryo/Falkor v1  | E1009           | QCOM_FALKOR_ERRATUM_1009    |
-+----------------+-----------------+-----------------+-----------------------------+
-| Qualcomm Tech. | QDF2400 ITS     | E0065           | QCOM_QDF2400_ERRATUM_0065   |
-+----------------+-----------------+-----------------+-----------------------------+
-| Qualcomm Tech. | Falkor v{1,2}   | E1041           | QCOM_FALKOR_ERRATUM_1041    |
-+----------------+-----------------+-----------------+-----------------------------+
-| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1463225       |
-+----------------+-----------------+-----------------+-----------------------------+
-| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1418040       |
-+----------------+-----------------+-----------------+-----------------------------+
-| Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1530923       |
-+----------------+-----------------+-----------------+-----------------------------+
-| Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1024718       |
-+----------------+-----------------+-----------------+-----------------------------+
-| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1286807       |
-+----------------+-----------------+-----------------+-----------------------------+
-+----------------+-----------------+-----------------+-----------------------------+
-| Rockchip       | RK3588          | #3588001        | ROCKCHIP_ERRATUM_3588001    |
-+----------------+-----------------+-----------------+-----------------------------+
-
-+----------------+-----------------+-----------------+-----------------------------+
-| Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
-+----------------+-----------------+-----------------+-----------------------------+
diff --git a/Documentation/arm64/sme.rst b/Documentation/arm64/sme.rst
deleted file mode 100644
index 1c43ea12eb4fd..0000000000000
--- a/Documentation/arm64/sme.rst
+++ /dev/null
@@ -1,468 +0,0 @@
-===================================================
-Scalable Matrix Extension support for AArch64 Linux
-===================================================
-
-This document outlines briefly the interface provided to userspace by Linux in
-order to support use of the ARM Scalable Matrix Extension (SME).
-
-This is an outline of the most important features and issues only and not
-intended to be exhaustive.  It should be read in conjunction with the SVE
-documentation in sve.rst which provides details on the Streaming SVE mode
-included in SME.
-
-This document does not aim to describe the SME architecture or programmer's
-model.  To aid understanding, a minimal description of relevant programmer's
-model features for SME is included in Appendix A.
-
-
-1.  General
------------
-
-* PSTATE.SM, PSTATE.ZA, the streaming mode vector length, the ZA and (when
-  present) ZTn register state and TPIDR2_EL0 are tracked per thread.
-
-* The presence of SME is reported to userspace via HWCAP2_SME in the aux vector
-  AT_HWCAP2 entry.  Presence of this flag implies the presence of the SME
-  instructions and registers, and the Linux-specific system interfaces
-  described in this document.  SME is reported in /proc/cpuinfo as "sme".
-
-* The presence of SME2 is reported to userspace via HWCAP2_SME2 in the
-  aux vector AT_HWCAP2 entry.  Presence of this flag implies the presence of
-  the SME2 instructions and ZT0, and the Linux-specific system interfaces
-  described in this document.  SME2 is reported in /proc/cpuinfo as "sme2".
-
-* Support for the execution of SME instructions in userspace can also be
-  detected by reading the CPU ID register ID_AA64PFR1_EL1 using an MRS
-  instruction, and checking that the value of the SME field is nonzero. [3]
-
-  It does not guarantee the presence of the system interfaces described in the
-  following sections: software that needs to verify that those interfaces are
-  present must check for HWCAP2_SME instead.
-
-* There are a number of optional SME features, presence of these is reported
-  through AT_HWCAP2 through:
-
-	HWCAP2_SME_I16I64
-	HWCAP2_SME_F64F64
-	HWCAP2_SME_I8I32
-	HWCAP2_SME_F16F32
-	HWCAP2_SME_B16F32
-	HWCAP2_SME_F32F32
-	HWCAP2_SME_FA64
-        HWCAP2_SME2
-
-  This list may be extended over time as the SME architecture evolves.
-
-  These extensions are also reported via the CPU ID register ID_AA64SMFR0_EL1,
-  which userspace can read using an MRS instruction.  See elf_hwcaps.txt and
-  cpu-feature-registers.txt for details.
-
-* Debuggers should restrict themselves to interacting with the target via the
-  NT_ARM_SVE, NT_ARM_SSVE, NT_ARM_ZA and NT_ARM_ZT regsets.  The recommended
-  way of detecting support for these regsets is to connect to a target process
-  first and then attempt a
-
-	ptrace(PTRACE_GETREGSET, pid, NT_ARM_<regset>, &iov).
-
-* Whenever ZA register values are exchanged in memory between userspace and
-  the kernel, the register value is encoded in memory as a series of horizontal
-  vectors from 0 to VL/8-1 stored in the same endianness invariant format as is
-  used for SVE vectors.
-
-* On thread creation TPIDR2_EL0 is preserved unless CLONE_SETTLS is specified,
-  in which case it is set to 0.
-
-2.  Vector lengths
-------------------
-
-SME defines a second vector length similar to the SVE vector length which is
-controls the size of the streaming mode SVE vectors and the ZA matrix array.
-The ZA matrix is square with each side having as many bytes as a streaming
-mode SVE vector.
-
-
-3.  Sharing of streaming and non-streaming mode SVE state
----------------------------------------------------------
-
-It is implementation defined which if any parts of the SVE state are shared
-between streaming and non-streaming modes.  When switching between modes
-via software interfaces such as ptrace if no register content is provided as
-part of switching no state will be assumed to be shared and everything will
-be zeroed.
-
-
-4.  System call behaviour
--------------------------
-
-* On syscall PSTATE.ZA is preserved, if PSTATE.ZA==1 then the contents of the
-  ZA matrix and ZTn (if present) are preserved.
-
-* On syscall PSTATE.SM will be cleared and the SVE registers will be handled
-  as per the standard SVE ABI.
-
-* None of the SVE registers, ZA or ZTn are used to pass arguments to
-  or receive results from any syscall.
-
-* On process creation (eg, clone()) the newly created process will have
-  PSTATE.SM cleared.
-
-* All other SME state of a thread, including the currently configured vector
-  length, the state of the PR_SME_VL_INHERIT flag, and the deferred vector
-  length (if any), is preserved across all syscalls, subject to the specific
-  exceptions for execve() described in section 6.
-
-
-5.  Signal handling
--------------------
-
-* Signal handlers are invoked with streaming mode and ZA disabled.
-
-* A new signal frame record TPIDR2_MAGIC is added formatted as a struct
-  tpidr2_context to allow access to TPIDR2_EL0 from signal handlers.
-
-* A new signal frame record za_context encodes the ZA register contents on
-  signal delivery. [1]
-
-* The signal frame record for ZA always contains basic metadata, in particular
-  the thread's vector length (in za_context.vl).
-
-* The ZA matrix may or may not be included in the record, depending on
-  the value of PSTATE.ZA.  The registers are present if and only if:
-  za_context.head.size >= ZA_SIG_CONTEXT_SIZE(sve_vq_from_vl(za_context.vl))
-  in which case PSTATE.ZA == 1.
-
-* If matrix data is present, the remainder of the record has a vl-dependent
-  size and layout.  Macros ZA_SIG_* are defined [1] to facilitate access to
-  them.
-
-* The matrix is stored as a series of horizontal vectors in the same format as
-  is used for SVE vectors.
-
-* If the ZA context is too big to fit in sigcontext.__reserved[], then extra
-  space is allocated on the stack, an extra_context record is written in
-  __reserved[] referencing this space.  za_context is then written in the
-  extra space.  Refer to [1] for further details about this mechanism.
-
-* If ZTn is supported and PSTATE.ZA==1 then a signal frame record for ZTn will
-  be generated.
-
-* The signal record for ZTn has magic ZT_MAGIC (0x5a544e01) and consists of a
-  standard signal frame header followed by a struct zt_context specifying
-  the number of ZTn registers supported by the system, then zt_context.nregs
-  blocks of 64 bytes of data per register.
-
-
-5.  Signal return
------------------
-
-When returning from a signal handler:
-
-* If there is no za_context record in the signal frame, or if the record is
-  present but contains no register data as described in the previous section,
-  then ZA is disabled.
-
-* If za_context is present in the signal frame and contains matrix data then
-  PSTATE.ZA is set to 1 and ZA is populated with the specified data.
-
-* The vector length cannot be changed via signal return.  If za_context.vl in
-  the signal frame does not match the current vector length, the signal return
-  attempt is treated as illegal, resulting in a forced SIGSEGV.
-
-* If ZTn is not supported or PSTATE.ZA==0 then it is illegal to have a
-  signal frame record for ZTn, resulting in a forced SIGSEGV.
-
-
-6.  prctl extensions
---------------------
-
-Some new prctl() calls are added to allow programs to manage the SME vector
-length:
-
-prctl(PR_SME_SET_VL, unsigned long arg)
-
-    Sets the vector length of the calling thread and related flags, where
-    arg == vl | flags.  Other threads of the calling process are unaffected.
-
-    vl is the desired vector length, where sve_vl_valid(vl) must be true.
-
-    flags:
-
-	PR_SME_VL_INHERIT
-
-	    Inherit the current vector length across execve().  Otherwise, the
-	    vector length is reset to the system default at execve().  (See
-	    Section 9.)
-
-	PR_SME_SET_VL_ONEXEC
-
-	    Defer the requested vector length change until the next execve()
-	    performed by this thread.
-
-	    The effect is equivalent to implicit execution of the following
-	    call immediately after the next execve() (if any) by the thread:
-
-		prctl(PR_SME_SET_VL, arg & ~PR_SME_SET_VL_ONEXEC)
-
-	    This allows launching of a new program with a different vector
-	    length, while avoiding runtime side effects in the caller.
-
-	    Without PR_SME_SET_VL_ONEXEC, the requested change takes effect
-	    immediately.
-
-
-    Return value: a nonnegative on success, or a negative value on error:
-	EINVAL: SME not supported, invalid vector length requested, or
-	    invalid flags.
-
-
-    On success:
-
-    * Either the calling thread's vector length or the deferred vector length
-      to be applied at the next execve() by the thread (dependent on whether
-      PR_SME_SET_VL_ONEXEC is present in arg), is set to the largest value
-      supported by the system that is less than or equal to vl.  If vl ==
-      SVE_VL_MAX, the value set will be the largest value supported by the
-      system.
-
-    * Any previously outstanding deferred vector length change in the calling
-      thread is cancelled.
-
-    * The returned value describes the resulting configuration, encoded as for
-      PR_SME_GET_VL.  The vector length reported in this value is the new
-      current vector length for this thread if PR_SME_SET_VL_ONEXEC was not
-      present in arg; otherwise, the reported vector length is the deferred
-      vector length that will be applied at the next execve() by the calling
-      thread.
-
-    * Changing the vector length causes all of ZA, ZTn, P0..P15, FFR and all
-      bits of Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
-      unspecified, including both streaming and non-streaming SVE state.
-      Calling PR_SME_SET_VL with vl equal to the thread's current vector
-      length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag,
-      does not constitute a change to the vector length for this purpose.
-
-    * Changing the vector length causes PSTATE.ZA and PSTATE.SM to be cleared.
-      Calling PR_SME_SET_VL with vl equal to the thread's current vector
-      length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag,
-      does not constitute a change to the vector length for this purpose.
-
-
-prctl(PR_SME_GET_VL)
-
-    Gets the vector length of the calling thread.
-
-    The following flag may be OR-ed into the result:
-
-	PR_SME_VL_INHERIT
-
-	    Vector length will be inherited across execve().
-
-    There is no way to determine whether there is an outstanding deferred
-    vector length change (which would only normally be the case between a
-    fork() or vfork() and the corresponding execve() in typical use).
-
-    To extract the vector length from the result, bitwise and it with
-    PR_SME_VL_LEN_MASK.
-
-    Return value: a nonnegative value on success, or a negative value on error:
-	EINVAL: SME not supported.
-
-
-7.  ptrace extensions
----------------------
-
-* A new regset NT_ARM_SSVE is defined for access to streaming mode SVE
-  state via PTRACE_GETREGSET and  PTRACE_SETREGSET, this is documented in
-  sve.rst.
-
-* A new regset NT_ARM_ZA is defined for ZA state for access to ZA state via
-  PTRACE_GETREGSET and PTRACE_SETREGSET.
-
-  Refer to [2] for definitions.
-
-The regset data starts with struct user_za_header, containing:
-
-    size
-
-	Size of the complete regset, in bytes.
-	This depends on vl and possibly on other things in the future.
-
-	If a call to PTRACE_GETREGSET requests less data than the value of
-	size, the caller can allocate a larger buffer and retry in order to
-	read the complete regset.
-
-    max_size
-
-	Maximum size in bytes that the regset can grow to for the target
-	thread.  The regset won't grow bigger than this even if the target
-	thread changes its vector length etc.
-
-    vl
-
-	Target thread's current streaming vector length, in bytes.
-
-    max_vl
-
-	Maximum possible streaming vector length for the target thread.
-
-    flags
-
-	Zero or more of the following flags, which have the same
-	meaning and behaviour as the corresponding PR_SET_VL_* flags:
-
-	    SME_PT_VL_INHERIT
-
-	    SME_PT_VL_ONEXEC (SETREGSET only).
-
-* The effects of changing the vector length and/or flags are equivalent to
-  those documented for PR_SME_SET_VL.
-
-  The caller must make a further GETREGSET call if it needs to know what VL is
-  actually set by SETREGSET, unless is it known in advance that the requested
-  VL is supported.
-
-* The size and layout of the payload depends on the header fields.  The
-  SME_PT_ZA_*() macros are provided to facilitate access to the data.
-
-* In either case, for SETREGSET it is permissible to omit the payload, in which
-  case the vector length and flags are changed and PSTATE.ZA is set to 0
-  (along with any consequences of those changes).  If a payload is provided
-  then PSTATE.ZA will be set to 1.
-
-* For SETREGSET, if the requested VL is not supported, the effect will be the
-  same as if the payload were omitted, except that an EIO error is reported.
-  No attempt is made to translate the payload data to the correct layout
-  for the vector length actually set.  It is up to the caller to translate the
-  payload layout for the actual VL and retry.
-
-* The effect of writing a partial, incomplete payload is unspecified.
-
-* A new regset NT_ARM_ZT is defined for access to ZTn state via
-  PTRACE_GETREGSET and PTRACE_SETREGSET.
-
-* The NT_ARM_ZT regset consists of a single 512 bit register.
-
-* When PSTATE.ZA==0 reads of NT_ARM_ZT will report all bits of ZTn as 0.
-
-* Writes to NT_ARM_ZT will set PSTATE.ZA to 1.
-
-
-8.  ELF coredump extensions
----------------------------
-
-* NT_ARM_SSVE notes will be added to each coredump for
-  each thread of the dumped process.  The contents will be equivalent to the
-  data that would have been read if a PTRACE_GETREGSET of the corresponding
-  type were executed for each thread when the coredump was generated.
-
-* A NT_ARM_ZA note will be added to each coredump for each thread of the
-  dumped process.  The contents will be equivalent to the data that would have
-  been read if a PTRACE_GETREGSET of NT_ARM_ZA were executed for each thread
-  when the coredump was generated.
-
-* A NT_ARM_ZT note will be added to each coredump for each thread of the
-  dumped process.  The contents will be equivalent to the data that would have
-  been read if a PTRACE_GETREGSET of NT_ARM_ZT were executed for each thread
-  when the coredump was generated.
-
-* The NT_ARM_TLS note will be extended to two registers, the second register
-  will contain TPIDR2_EL0 on systems that support SME and will be read as
-  zero with writes ignored otherwise.
-
-9.  System runtime configuration
---------------------------------
-
-* To mitigate the ABI impact of expansion of the signal frame, a policy
-  mechanism is provided for administrators, distro maintainers and developers
-  to set the default vector length for userspace processes:
-
-/proc/sys/abi/sme_default_vector_length
-
-    Writing the text representation of an integer to this file sets the system
-    default vector length to the specified value, unless the value is greater
-    than the maximum vector length supported by the system in which case the
-    default vector length is set to that maximum.
-
-    The result can be determined by reopening the file and reading its
-    contents.
-
-    At boot, the default vector length is initially set to 32 or the maximum
-    supported vector length, whichever is smaller and supported.  This
-    determines the initial vector length of the init process (PID 1).
-
-    Reading this file returns the current system default vector length.
-
-* At every execve() call, the new vector length of the new process is set to
-  the system default vector length, unless
-
-    * PR_SME_VL_INHERIT (or equivalently SME_PT_VL_INHERIT) is set for the
-      calling thread, or
-
-    * a deferred vector length change is pending, established via the
-      PR_SME_SET_VL_ONEXEC flag (or SME_PT_VL_ONEXEC).
-
-* Modifying the system default vector length does not affect the vector length
-  of any existing process or thread that does not make an execve() call.
-
-
-Appendix A.  SME programmer's model (informative)
-=================================================
-
-This section provides a minimal description of the additions made by SME to the
-ARMv8-A programmer's model that are relevant to this document.
-
-Note: This section is for information only and not intended to be complete or
-to replace any architectural specification.
-
-A.1.  Registers
----------------
-
-In A64 state, SME adds the following:
-
-* A new mode, streaming mode, in which a subset of the normal FPSIMD and SVE
-  features are available.  When supported EL0 software may enter and leave
-  streaming mode at any time.
-
-  For best system performance it is strongly encouraged for software to enable
-  streaming mode only when it is actively being used.
-
-* A new vector length controlling the size of ZA and the Z registers when in
-  streaming mode, separately to the vector length used for SVE when not in
-  streaming mode.  There is no requirement that either the currently selected
-  vector length or the set of vector lengths supported for the two modes in
-  a given system have any relationship.  The streaming mode vector length
-  is referred to as SVL.
-
-* A new ZA matrix register.  This is a square matrix of SVLxSVL bits.  Most
-  operations on ZA require that streaming mode be enabled but ZA can be
-  enabled without streaming mode in order to load, save and retain data.
-
-  For best system performance it is strongly encouraged for software to enable
-  ZA only when it is actively being used.
-
-* A new ZT0 register is introduced when SME2 is present. This is a 512 bit
-  register which is accessible when PSTATE.ZA is set, as ZA itself is.
-
-* Two new 1 bit fields in PSTATE which may be controlled via the SMSTART and
-  SMSTOP instructions or by access to the SVCR system register:
-
-  * PSTATE.ZA, if this is 1 then the ZA matrix is accessible and has valid
-    data while if it is 0 then ZA can not be accessed.  When PSTATE.ZA is
-    changed from 0 to 1 all bits in ZA are cleared.
-
-  * PSTATE.SM, if this is 1 then the PE is in streaming mode.  When the value
-    of PSTATE.SM is changed then it is implementation defined if the subset
-    of the floating point register bits valid in both modes may be retained.
-    Any other bits will be cleared.
-
-
-References
-==========
-
-[1] arch/arm64/include/uapi/asm/sigcontext.h
-    AArch64 Linux signal ABI definitions
-
-[2] arch/arm64/include/uapi/asm/ptrace.h
-    AArch64 Linux ptrace ABI definitions
-
-[3] Documentation/arm64/cpu-feature-registers.rst
diff --git a/Documentation/arm64/sve.rst b/Documentation/arm64/sve.rst
deleted file mode 100644
index 1b90a30382ac0..0000000000000
--- a/Documentation/arm64/sve.rst
+++ /dev/null
@@ -1,616 +0,0 @@
-===================================================
-Scalable Vector Extension support for AArch64 Linux
-===================================================
-
-Author: Dave Martin <Dave.Martin@arm.com>
-
-Date:   4 August 2017
-
-This document outlines briefly the interface provided to userspace by Linux in
-order to support use of the ARM Scalable Vector Extension (SVE), including
-interactions with Streaming SVE mode added by the Scalable Matrix Extension
-(SME).
-
-This is an outline of the most important features and issues only and not
-intended to be exhaustive.
-
-This document does not aim to describe the SVE architecture or programmer's
-model.  To aid understanding, a minimal description of relevant programmer's
-model features for SVE is included in Appendix A.
-
-
-1.  General
------------
-
-* SVE registers Z0..Z31, P0..P15 and FFR and the current vector length VL, are
-  tracked per-thread.
-
-* In streaming mode FFR is not accessible unless HWCAP2_SME_FA64 is present
-  in the system, when it is not supported and these interfaces are used to
-  access streaming mode FFR is read and written as zero.
-
-* The presence of SVE is reported to userspace via HWCAP_SVE in the aux vector
-  AT_HWCAP entry.  Presence of this flag implies the presence of the SVE
-  instructions and registers, and the Linux-specific system interfaces
-  described in this document.  SVE is reported in /proc/cpuinfo as "sve".
-
-* Support for the execution of SVE instructions in userspace can also be
-  detected by reading the CPU ID register ID_AA64PFR0_EL1 using an MRS
-  instruction, and checking that the value of the SVE field is nonzero. [3]
-
-  It does not guarantee the presence of the system interfaces described in the
-  following sections: software that needs to verify that those interfaces are
-  present must check for HWCAP_SVE instead.
-
-* On hardware that supports the SVE2 extensions, HWCAP2_SVE2 will also
-  be reported in the AT_HWCAP2 aux vector entry.  In addition to this,
-  optional extensions to SVE2 may be reported by the presence of:
-
-	HWCAP2_SVE2
-	HWCAP2_SVEAES
-	HWCAP2_SVEPMULL
-	HWCAP2_SVEBITPERM
-	HWCAP2_SVESHA3
-	HWCAP2_SVESM4
-	HWCAP2_SVE2P1
-
-  This list may be extended over time as the SVE architecture evolves.
-
-  These extensions are also reported via the CPU ID register ID_AA64ZFR0_EL1,
-  which userspace can read using an MRS instruction.  See elf_hwcaps.txt and
-  cpu-feature-registers.txt for details.
-
-* On hardware that supports the SME extensions, HWCAP2_SME will also be
-  reported in the AT_HWCAP2 aux vector entry.  Among other things SME adds
-  streaming mode which provides a subset of the SVE feature set using a
-  separate SME vector length and the same Z/V registers.  See sme.rst
-  for more details.
-
-* Debuggers should restrict themselves to interacting with the target via the
-  NT_ARM_SVE regset.  The recommended way of detecting support for this regset
-  is to connect to a target process first and then attempt a
-  ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov).  Note that when SME is
-  present and streaming SVE mode is in use the FPSIMD subset of registers
-  will be read via NT_ARM_SVE and NT_ARM_SVE writes will exit streaming mode
-  in the target.
-
-* Whenever SVE scalable register values (Zn, Pn, FFR) are exchanged in memory
-  between userspace and the kernel, the register value is encoded in memory in
-  an endianness-invariant layout, with bits [(8 * i + 7) : (8 * i)] encoded at
-  byte offset i from the start of the memory representation.  This affects for
-  example the signal frame (struct sve_context) and ptrace interface
-  (struct user_sve_header) and associated data.
-
-  Beware that on big-endian systems this results in a different byte order than
-  for the FPSIMD V-registers, which are stored as single host-endian 128-bit
-  values, with bits [(127 - 8 * i) : (120 - 8 * i)] of the register encoded at
-  byte offset i.  (struct fpsimd_context, struct user_fpsimd_state).
-
-
-2.  Vector length terminology
------------------------------
-
-The size of an SVE vector (Z) register is referred to as the "vector length".
-
-To avoid confusion about the units used to express vector length, the kernel
-adopts the following conventions:
-
-* Vector length (VL) = size of a Z-register in bytes
-
-* Vector quadwords (VQ) = size of a Z-register in units of 128 bits
-
-(So, VL = 16 * VQ.)
-
-The VQ convention is used where the underlying granularity is important, such
-as in data structure definitions.  In most other situations, the VL convention
-is used.  This is consistent with the meaning of the "VL" pseudo-register in
-the SVE instruction set architecture.
-
-
-3.  System call behaviour
--------------------------
-
-* On syscall, V0..V31 are preserved (as without SVE).  Thus, bits [127:0] of
-  Z0..Z31 are preserved.  All other bits of Z0..Z31, and all of P0..P15 and FFR
-  become zero on return from a syscall.
-
-* The SVE registers are not used to pass arguments to or receive results from
-  any syscall.
-
-* In practice the affected registers/bits will be preserved or will be replaced
-  with zeros on return from a syscall, but userspace should not make
-  assumptions about this.  The kernel behaviour may vary on a case-by-case
-  basis.
-
-* All other SVE state of a thread, including the currently configured vector
-  length, the state of the PR_SVE_VL_INHERIT flag, and the deferred vector
-  length (if any), is preserved across all syscalls, subject to the specific
-  exceptions for execve() described in section 6.
-
-  In particular, on return from a fork() or clone(), the parent and new child
-  process or thread share identical SVE configuration, matching that of the
-  parent before the call.
-
-
-4.  Signal handling
--------------------
-
-* A new signal frame record sve_context encodes the SVE registers on signal
-  delivery. [1]
-
-* This record is supplementary to fpsimd_context.  The FPSR and FPCR registers
-  are only present in fpsimd_context.  For convenience, the content of V0..V31
-  is duplicated between sve_context and fpsimd_context.
-
-* The record contains a flag field which includes a flag SVE_SIG_FLAG_SM which
-  if set indicates that the thread is in streaming mode and the vector length
-  and register data (if present) describe the streaming SVE data and vector
-  length.
-
-* The signal frame record for SVE always contains basic metadata, in particular
-  the thread's vector length (in sve_context.vl).
-
-* The SVE registers may or may not be included in the record, depending on
-  whether the registers are live for the thread.  The registers are present if
-  and only if:
-  sve_context.head.size >= SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl)).
-
-* If the registers are present, the remainder of the record has a vl-dependent
-  size and layout.  Macros SVE_SIG_* are defined [1] to facilitate access to
-  the members.
-
-* Each scalable register (Zn, Pn, FFR) is stored in an endianness-invariant
-  layout, with bits [(8 * i + 7) : (8 * i)] stored at byte offset i from the
-  start of the register's representation in memory.
-
-* If the SVE context is too big to fit in sigcontext.__reserved[], then extra
-  space is allocated on the stack, an extra_context record is written in
-  __reserved[] referencing this space.  sve_context is then written in the
-  extra space.  Refer to [1] for further details about this mechanism.
-
-
-5.  Signal return
------------------
-
-When returning from a signal handler:
-
-* If there is no sve_context record in the signal frame, or if the record is
-  present but contains no register data as described in the previous section,
-  then the SVE registers/bits become non-live and take unspecified values.
-
-* If sve_context is present in the signal frame and contains full register
-  data, the SVE registers become live and are populated with the specified
-  data.  However, for backward compatibility reasons, bits [127:0] of Z0..Z31
-  are always restored from the corresponding members of fpsimd_context.vregs[]
-  and not from sve_context.  The remaining bits are restored from sve_context.
-
-* Inclusion of fpsimd_context in the signal frame remains mandatory,
-  irrespective of whether sve_context is present or not.
-
-* The vector length cannot be changed via signal return.  If sve_context.vl in
-  the signal frame does not match the current vector length, the signal return
-  attempt is treated as illegal, resulting in a forced SIGSEGV.
-
-* It is permitted to enter or leave streaming mode by setting or clearing
-  the SVE_SIG_FLAG_SM flag but applications should take care to ensure that
-  when doing so sve_context.vl and any register data are appropriate for the
-  vector length in the new mode.
-
-
-6.  prctl extensions
---------------------
-
-Some new prctl() calls are added to allow programs to manage the SVE vector
-length:
-
-prctl(PR_SVE_SET_VL, unsigned long arg)
-
-    Sets the vector length of the calling thread and related flags, where
-    arg == vl | flags.  Other threads of the calling process are unaffected.
-
-    vl is the desired vector length, where sve_vl_valid(vl) must be true.
-
-    flags:
-
-	PR_SVE_VL_INHERIT
-
-	    Inherit the current vector length across execve().  Otherwise, the
-	    vector length is reset to the system default at execve().  (See
-	    Section 9.)
-
-	PR_SVE_SET_VL_ONEXEC
-
-	    Defer the requested vector length change until the next execve()
-	    performed by this thread.
-
-	    The effect is equivalent to implicit execution of the following
-	    call immediately after the next execve() (if any) by the thread:
-
-		prctl(PR_SVE_SET_VL, arg & ~PR_SVE_SET_VL_ONEXEC)
-
-	    This allows launching of a new program with a different vector
-	    length, while avoiding runtime side effects in the caller.
-
-
-	    Without PR_SVE_SET_VL_ONEXEC, the requested change takes effect
-	    immediately.
-
-
-    Return value: a nonnegative on success, or a negative value on error:
-	EINVAL: SVE not supported, invalid vector length requested, or
-	    invalid flags.
-
-
-    On success:
-
-    * Either the calling thread's vector length or the deferred vector length
-      to be applied at the next execve() by the thread (dependent on whether
-      PR_SVE_SET_VL_ONEXEC is present in arg), is set to the largest value
-      supported by the system that is less than or equal to vl.  If vl ==
-      SVE_VL_MAX, the value set will be the largest value supported by the
-      system.
-
-    * Any previously outstanding deferred vector length change in the calling
-      thread is cancelled.
-
-    * The returned value describes the resulting configuration, encoded as for
-      PR_SVE_GET_VL.  The vector length reported in this value is the new
-      current vector length for this thread if PR_SVE_SET_VL_ONEXEC was not
-      present in arg; otherwise, the reported vector length is the deferred
-      vector length that will be applied at the next execve() by the calling
-      thread.
-
-    * Changing the vector length causes all of P0..P15, FFR and all bits of
-      Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
-      unspecified.  Calling PR_SVE_SET_VL with vl equal to the thread's current
-      vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC
-      flag, does not constitute a change to the vector length for this purpose.
-
-
-prctl(PR_SVE_GET_VL)
-
-    Gets the vector length of the calling thread.
-
-    The following flag may be OR-ed into the result:
-
-	PR_SVE_VL_INHERIT
-
-	    Vector length will be inherited across execve().
-
-    There is no way to determine whether there is an outstanding deferred
-    vector length change (which would only normally be the case between a
-    fork() or vfork() and the corresponding execve() in typical use).
-
-    To extract the vector length from the result, bitwise and it with
-    PR_SVE_VL_LEN_MASK.
-
-    Return value: a nonnegative value on success, or a negative value on error:
-	EINVAL: SVE not supported.
-
-
-7.  ptrace extensions
----------------------
-
-* New regsets NT_ARM_SVE and NT_ARM_SSVE are defined for use with
-  PTRACE_GETREGSET and PTRACE_SETREGSET. NT_ARM_SSVE describes the
-  streaming mode SVE registers and NT_ARM_SVE describes the
-  non-streaming mode SVE registers.
-
-  In this description a register set is referred to as being "live" when
-  the target is in the appropriate streaming or non-streaming mode and is
-  using data beyond the subset shared with the FPSIMD Vn registers.
-
-  Refer to [2] for definitions.
-
-The regset data starts with struct user_sve_header, containing:
-
-    size
-
-	Size of the complete regset, in bytes.
-	This depends on vl and possibly on other things in the future.
-
-	If a call to PTRACE_GETREGSET requests less data than the value of
-	size, the caller can allocate a larger buffer and retry in order to
-	read the complete regset.
-
-    max_size
-
-	Maximum size in bytes that the regset can grow to for the target
-	thread.  The regset won't grow bigger than this even if the target
-	thread changes its vector length etc.
-
-    vl
-
-	Target thread's current vector length, in bytes.
-
-    max_vl
-
-	Maximum possible vector length for the target thread.
-
-    flags
-
-	at most one of
-
-	    SVE_PT_REGS_FPSIMD
-
-		SVE registers are not live (GETREGSET) or are to be made
-		non-live (SETREGSET).
-
-		The payload is of type struct user_fpsimd_state, with the same
-		meaning as for NT_PRFPREG, starting at offset
-		SVE_PT_FPSIMD_OFFSET from the start of user_sve_header.
-
-		Extra data might be appended in the future: the size of the
-		payload should be obtained using SVE_PT_FPSIMD_SIZE(vq, flags).
-
-		vq should be obtained using sve_vq_from_vl(vl).
-
-		or
-
-	    SVE_PT_REGS_SVE
-
-		SVE registers are live (GETREGSET) or are to be made live
-		(SETREGSET).
-
-		The payload contains the SVE register data, starting at offset
-		SVE_PT_SVE_OFFSET from the start of user_sve_header, and with
-		size SVE_PT_SVE_SIZE(vq, flags);
-
-	... OR-ed with zero or more of the following flags, which have the same
-	meaning and behaviour as the corresponding PR_SET_VL_* flags:
-
-	    SVE_PT_VL_INHERIT
-
-	    SVE_PT_VL_ONEXEC (SETREGSET only).
-
-	If neither FPSIMD nor SVE flags are provided then no register
-	payload is available, this is only possible when SME is implemented.
-
-
-* The effects of changing the vector length and/or flags are equivalent to
-  those documented for PR_SVE_SET_VL.
-
-  The caller must make a further GETREGSET call if it needs to know what VL is
-  actually set by SETREGSET, unless is it known in advance that the requested
-  VL is supported.
-
-* In the SVE_PT_REGS_SVE case, the size and layout of the payload depends on
-  the header fields.  The SVE_PT_SVE_*() macros are provided to facilitate
-  access to the members.
-
-* In either case, for SETREGSET it is permissible to omit the payload, in which
-  case only the vector length and flags are changed (along with any
-  consequences of those changes).
-
-* In systems supporting SME when in streaming mode a GETREGSET for
-  NT_REG_SVE will return only the user_sve_header with no register data,
-  similarly a GETREGSET for NT_REG_SSVE will not return any register data
-  when not in streaming mode.
-
-* A GETREGSET for NT_ARM_SSVE will never return SVE_PT_REGS_FPSIMD.
-
-* For SETREGSET, if an SVE_PT_REGS_SVE payload is present and the
-  requested VL is not supported, the effect will be the same as if the
-  payload were omitted, except that an EIO error is reported.  No
-  attempt is made to translate the payload data to the correct layout
-  for the vector length actually set.  The thread's FPSIMD state is
-  preserved, but the remaining bits of the SVE registers become
-  unspecified.  It is up to the caller to translate the payload layout
-  for the actual VL and retry.
-
-* Where SME is implemented it is not possible to GETREGSET the register
-  state for normal SVE when in streaming mode, nor the streaming mode
-  register state when in normal mode, regardless of the implementation defined
-  behaviour of the hardware for sharing data between the two modes.
-
-* Any SETREGSET of NT_ARM_SVE will exit streaming mode if the target was in
-  streaming mode and any SETREGSET of NT_ARM_SSVE will enter streaming mode
-  if the target was not in streaming mode.
-
-* The effect of writing a partial, incomplete payload is unspecified.
-
-
-8.  ELF coredump extensions
----------------------------
-
-* NT_ARM_SVE and NT_ARM_SSVE notes will be added to each coredump for
-  each thread of the dumped process.  The contents will be equivalent to the
-  data that would have been read if a PTRACE_GETREGSET of the corresponding
-  type were executed for each thread when the coredump was generated.
-
-9.  System runtime configuration
---------------------------------
-
-* To mitigate the ABI impact of expansion of the signal frame, a policy
-  mechanism is provided for administrators, distro maintainers and developers
-  to set the default vector length for userspace processes:
-
-/proc/sys/abi/sve_default_vector_length
-
-    Writing the text representation of an integer to this file sets the system
-    default vector length to the specified value, unless the value is greater
-    than the maximum vector length supported by the system in which case the
-    default vector length is set to that maximum.
-
-    The result can be determined by reopening the file and reading its
-    contents.
-
-    At boot, the default vector length is initially set to 64 or the maximum
-    supported vector length, whichever is smaller.  This determines the initial
-    vector length of the init process (PID 1).
-
-    Reading this file returns the current system default vector length.
-
-* At every execve() call, the new vector length of the new process is set to
-  the system default vector length, unless
-
-    * PR_SVE_VL_INHERIT (or equivalently SVE_PT_VL_INHERIT) is set for the
-      calling thread, or
-
-    * a deferred vector length change is pending, established via the
-      PR_SVE_SET_VL_ONEXEC flag (or SVE_PT_VL_ONEXEC).
-
-* Modifying the system default vector length does not affect the vector length
-  of any existing process or thread that does not make an execve() call.
-
-10.  Perf extensions
---------------------------------
-
-* The arm64 specific DWARF standard [5] added the VG (Vector Granule) register
-  at index 46. This register is used for DWARF unwinding when variable length
-  SVE registers are pushed onto the stack.
-
-* Its value is equivalent to the current SVE vector length (VL) in bits divided
-  by 64.
-
-* The value is included in Perf samples in the regs[46] field if
-  PERF_SAMPLE_REGS_USER is set and the sample_regs_user mask has bit 46 set.
-
-* The value is the current value at the time the sample was taken, and it can
-  change over time.
-
-* If the system doesn't support SVE when perf_event_open is called with these
-  settings, the event will fail to open.
-
-Appendix A.  SVE programmer's model (informative)
-=================================================
-
-This section provides a minimal description of the additions made by SVE to the
-ARMv8-A programmer's model that are relevant to this document.
-
-Note: This section is for information only and not intended to be complete or
-to replace any architectural specification.
-
-A.1.  Registers
----------------
-
-In A64 state, SVE adds the following:
-
-* 32 8VL-bit vector registers Z0..Z31
-  For each Zn, Zn bits [127:0] alias the ARMv8-A vector register Vn.
-
-  A register write using a Vn register name zeros all bits of the corresponding
-  Zn except for bits [127:0].
-
-* 16 VL-bit predicate registers P0..P15
-
-* 1 VL-bit special-purpose predicate register FFR (the "first-fault register")
-
-* a VL "pseudo-register" that determines the size of each vector register
-
-  The SVE instruction set architecture provides no way to write VL directly.
-  Instead, it can be modified only by EL1 and above, by writing appropriate
-  system registers.
-
-* The value of VL can be configured at runtime by EL1 and above:
-  16 <= VL <= VLmax, where VL must be a multiple of 16.
-
-* The maximum vector length is determined by the hardware:
-  16 <= VLmax <= 256.
-
-  (The SVE architecture specifies 256, but permits future architecture
-  revisions to raise this limit.)
-
-* FPSR and FPCR are retained from ARMv8-A, and interact with SVE floating-point
-  operations in a similar way to the way in which they interact with ARMv8
-  floating-point operations::
-
-         8VL-1                       128               0  bit index
-        +----          ////            -----------------+
-     Z0 |                               :       V0      |
-      :                                          :
-     Z7 |                               :       V7      |
-     Z8 |                               :     * V8      |
-      :                                       :  :
-    Z15 |                               :     *V15      |
-    Z16 |                               :      V16      |
-      :                                          :
-    Z31 |                               :      V31      |
-        +----          ////            -----------------+
-                                                 31    0
-         VL-1                  0                +-------+
-        +----       ////      --+          FPSR |       |
-     P0 |                       |               +-------+
-      : |                       |         *FPCR |       |
-    P15 |                       |               +-------+
-        +----       ////      --+
-    FFR |                       |               +-----+
-        +----       ////      --+            VL |     |
-                                                +-----+
-
-(*) callee-save:
-    This only applies to bits [63:0] of Z-/V-registers.
-    FPCR contains callee-save and caller-save bits.  See [4] for details.
-
-
-A.2.  Procedure call standard
------------------------------
-
-The ARMv8-A base procedure call standard is extended as follows with respect to
-the additional SVE register state:
-
-* All SVE register bits that are not shared with FP/SIMD are caller-save.
-
-* Z8 bits [63:0] .. Z15 bits [63:0] are callee-save.
-
-  This follows from the way these bits are mapped to V8..V15, which are caller-
-  save in the base procedure call standard.
-
-
-Appendix B.  ARMv8-A FP/SIMD programmer's model
-===============================================
-
-Note: This section is for information only and not intended to be complete or
-to replace any architectural specification.
-
-Refer to [4] for more information.
-
-ARMv8-A defines the following floating-point / SIMD register state:
-
-* 32 128-bit vector registers V0..V31
-* 2 32-bit status/control registers FPSR, FPCR
-
-::
-
-         127           0  bit index
-        +---------------+
-     V0 |               |
-      : :               :
-     V7 |               |
-   * V8 |               |
-   :  : :               :
-   *V15 |               |
-    V16 |               |
-      : :               :
-    V31 |               |
-        +---------------+
-
-                 31    0
-                +-------+
-           FPSR |       |
-                +-------+
-          *FPCR |       |
-                +-------+
-
-(*) callee-save:
-    This only applies to bits [63:0] of V-registers.
-    FPCR contains a mixture of callee-save and caller-save bits.
-
-
-References
-==========
-
-[1] arch/arm64/include/uapi/asm/sigcontext.h
-    AArch64 Linux signal ABI definitions
-
-[2] arch/arm64/include/uapi/asm/ptrace.h
-    AArch64 Linux ptrace ABI definitions
-
-[3] Documentation/arm64/cpu-feature-registers.rst
-
-[4] ARM IHI0055C
-    http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf
-    http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
-    Procedure Call Standard for the ARM 64-bit Architecture (AArch64)
-
-[5] https://github.com/ARM-software/abi-aa/blob/main/aadwarf64/aadwarf64.rst
diff --git a/Documentation/arm64/tagged-address-abi.rst b/Documentation/arm64/tagged-address-abi.rst
deleted file mode 100644
index 540a1d4fc6c9e..0000000000000
--- a/Documentation/arm64/tagged-address-abi.rst
+++ /dev/null
@@ -1,179 +0,0 @@
-==========================
-AArch64 TAGGED ADDRESS ABI
-==========================
-
-Authors: Vincenzo Frascino <vincenzo.frascino@arm.com>
-         Catalin Marinas <catalin.marinas@arm.com>
-
-Date: 21 August 2019
-
-This document describes the usage and semantics of the Tagged Address
-ABI on AArch64 Linux.
-
-1. Introduction
----------------
-
-On AArch64 the ``TCR_EL1.TBI0`` bit is set by default, allowing
-userspace (EL0) to perform memory accesses through 64-bit pointers with
-a non-zero top byte. This document describes the relaxation of the
-syscall ABI that allows userspace to pass certain tagged pointers to
-kernel syscalls.
-
-2. AArch64 Tagged Address ABI
------------------------------
-
-From the kernel syscall interface perspective and for the purposes of
-this document, a "valid tagged pointer" is a pointer with a potentially
-non-zero top-byte that references an address in the user process address
-space obtained in one of the following ways:
-
-- ``mmap()`` syscall where either:
-
-  - flags have the ``MAP_ANONYMOUS`` bit set or
-  - the file descriptor refers to a regular file (including those
-    returned by ``memfd_create()``) or ``/dev/zero``
-
-- ``brk()`` syscall (i.e. the heap area between the initial location of
-  the program break at process creation and its current location).
-
-- any memory mapped by the kernel in the address space of the process
-  during creation and with the same restrictions as for ``mmap()`` above
-  (e.g. data, bss, stack).
-
-The AArch64 Tagged Address ABI has two stages of relaxation depending on
-how the user addresses are used by the kernel:
-
-1. User addresses not accessed by the kernel but used for address space
-   management (e.g. ``mprotect()``, ``madvise()``). The use of valid
-   tagged pointers in this context is allowed with these exceptions:
-
-   - ``brk()``, ``mmap()`` and the ``new_address`` argument to
-     ``mremap()`` as these have the potential to alias with existing
-     user addresses.
-
-     NOTE: This behaviour changed in v5.6 and so some earlier kernels may
-     incorrectly accept valid tagged pointers for the ``brk()``,
-     ``mmap()`` and ``mremap()`` system calls.
-
-   - The ``range.start``, ``start`` and ``dst`` arguments to the
-     ``UFFDIO_*`` ``ioctl()``s used on a file descriptor obtained from
-     ``userfaultfd()``, as fault addresses subsequently obtained by reading
-     the file descriptor will be untagged, which may otherwise confuse
-     tag-unaware programs.
-
-     NOTE: This behaviour changed in v5.14 and so some earlier kernels may
-     incorrectly accept valid tagged pointers for this system call.
-
-2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
-   relaxation is disabled by default and the application thread needs to
-   explicitly enable it via ``prctl()`` as follows:
-
-   - ``PR_SET_TAGGED_ADDR_CTRL``: enable or disable the AArch64 Tagged
-     Address ABI for the calling thread.
-
-     The ``(unsigned int) arg2`` argument is a bit mask describing the
-     control mode used:
-
-     - ``PR_TAGGED_ADDR_ENABLE``: enable AArch64 Tagged Address ABI.
-       Default status is disabled.
-
-     Arguments ``arg3``, ``arg4``, and ``arg5`` must be 0.
-
-   - ``PR_GET_TAGGED_ADDR_CTRL``: get the status of the AArch64 Tagged
-     Address ABI for the calling thread.
-
-     Arguments ``arg2``, ``arg3``, ``arg4``, and ``arg5`` must be 0.
-
-   The ABI properties described above are thread-scoped, inherited on
-   clone() and fork() and cleared on exec().
-
-   Calling ``prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, 0, 0, 0)``
-   returns ``-EINVAL`` if the AArch64 Tagged Address ABI is globally
-   disabled by ``sysctl abi.tagged_addr_disabled=1``. The default
-   ``sysctl abi.tagged_addr_disabled`` configuration is 0.
-
-When the AArch64 Tagged Address ABI is enabled for a thread, the
-following behaviours are guaranteed:
-
-- All syscalls except the cases mentioned in section 3 can accept any
-  valid tagged pointer.
-
-- The syscall behaviour is undefined for invalid tagged pointers: it may
-  result in an error code being returned, a (fatal) signal being raised,
-  or other modes of failure.
-
-- The syscall behaviour for a valid tagged pointer is the same as for
-  the corresponding untagged pointer.
-
-
-A definition of the meaning of tagged pointers on AArch64 can be found
-in Documentation/arm64/tagged-pointers.rst.
-
-3. AArch64 Tagged Address ABI Exceptions
------------------------------------------
-
-The following system call parameters must be untagged regardless of the
-ABI relaxation:
-
-- ``prctl()`` other than pointers to user data either passed directly or
-  indirectly as arguments to be accessed by the kernel.
-
-- ``ioctl()`` other than pointers to user data either passed directly or
-  indirectly as arguments to be accessed by the kernel.
-
-- ``shmat()`` and ``shmdt()``.
-
-- ``brk()`` (since kernel v5.6).
-
-- ``mmap()`` (since kernel v5.6).
-
-- ``mremap()``, the ``new_address`` argument (since kernel v5.6).
-
-Any attempt to use non-zero tagged pointers may result in an error code
-being returned, a (fatal) signal being raised, or other modes of
-failure.
-
-4. Example of correct usage
----------------------------
-.. code-block:: c
-
-   #include <stdlib.h>
-   #include <string.h>
-   #include <unistd.h>
-   #include <sys/mman.h>
-   #include <sys/prctl.h>
-   
-   #define PR_SET_TAGGED_ADDR_CTRL	55
-   #define PR_TAGGED_ADDR_ENABLE	(1UL << 0)
-   
-   #define TAG_SHIFT		56
-   
-   int main(void)
-   {
-   	int tbi_enabled = 0;
-   	unsigned long tag = 0;
-   	char *ptr;
-   
-   	/* check/enable the tagged address ABI */
-   	if (!prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, 0, 0, 0))
-   		tbi_enabled = 1;
-   
-   	/* memory allocation */
-   	ptr = mmap(NULL, sysconf(_SC_PAGE_SIZE), PROT_READ | PROT_WRITE,
-   		   MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-   	if (ptr == MAP_FAILED)
-   		return 1;
-   
-   	/* set a non-zero tag if the ABI is available */
-   	if (tbi_enabled)
-   		tag = rand() & 0xff;
-   	ptr = (char *)((unsigned long)ptr | (tag << TAG_SHIFT));
-   
-   	/* memory access to a tagged address */
-   	strcpy(ptr, "tagged pointer\n");
-   
-   	/* syscall with a tagged pointer */
-   	write(1, ptr, strlen(ptr));
-   
-   	return 0;
-   }
diff --git a/Documentation/arm64/tagged-pointers.rst b/Documentation/arm64/tagged-pointers.rst
deleted file mode 100644
index 19d284b703848..0000000000000
--- a/Documentation/arm64/tagged-pointers.rst
+++ /dev/null
@@ -1,88 +0,0 @@
-=========================================
-Tagged virtual addresses in AArch64 Linux
-=========================================
-
-Author: Will Deacon <will.deacon@arm.com>
-
-Date  : 12 June 2013
-
-This document briefly describes the provision of tagged virtual
-addresses in the AArch64 translation system and their potential uses
-in AArch64 Linux.
-
-The kernel configures the translation tables so that translations made
-via TTBR0 (i.e. userspace mappings) have the top byte (bits 63:56) of
-the virtual address ignored by the translation hardware. This frees up
-this byte for application use.
-
-
-Passing tagged addresses to the kernel
---------------------------------------
-
-All interpretation of userspace memory addresses by the kernel assumes
-an address tag of 0x00, unless the application enables the AArch64
-Tagged Address ABI explicitly
-(Documentation/arm64/tagged-address-abi.rst).
-
-This includes, but is not limited to, addresses found in:
-
- - pointer arguments to system calls, including pointers in structures
-   passed to system calls,
-
- - the stack pointer (sp), e.g. when interpreting it to deliver a
-   signal,
-
- - the frame pointer (x29) and frame records, e.g. when interpreting
-   them to generate a backtrace or call graph.
-
-Using non-zero address tags in any of these locations when the
-userspace application did not enable the AArch64 Tagged Address ABI may
-result in an error code being returned, a (fatal) signal being raised,
-or other modes of failure.
-
-For these reasons, when the AArch64 Tagged Address ABI is disabled,
-passing non-zero address tags to the kernel via system calls is
-forbidden, and using a non-zero address tag for sp is strongly
-discouraged.
-
-Programs maintaining a frame pointer and frame records that use non-zero
-address tags may suffer impaired or inaccurate debug and profiling
-visibility.
-
-
-Preserving tags
----------------
-
-When delivering signals, non-zero tags are not preserved in
-siginfo.si_addr unless the flag SA_EXPOSE_TAGBITS was set in
-sigaction.sa_flags when the signal handler was installed. This means
-that signal handlers in applications making use of tags cannot rely
-on the tag information for user virtual addresses being maintained
-in these fields unless the flag was set.
-
-Due to architecture limitations, bits 63:60 of the fault address
-are not preserved in response to synchronous tag check faults
-(SEGV_MTESERR) even if SA_EXPOSE_TAGBITS was set. Applications should
-treat the values of these bits as undefined in order to accommodate
-future architecture revisions which may preserve the bits.
-
-For signals raised in response to watchpoint debug exceptions, the
-tag information will be preserved regardless of the SA_EXPOSE_TAGBITS
-flag setting.
-
-Non-zero tags are never preserved in sigcontext.fault_address
-regardless of the SA_EXPOSE_TAGBITS flag setting.
-
-The architecture prevents the use of a tagged PC, so the upper byte will
-be set to a sign-extension of bit 55 on exception return.
-
-This behaviour is maintained when the AArch64 Tagged Address ABI is
-enabled.
-
-
-Other considerations
---------------------
-
-Special care should be taken when using tagged pointers, since it is
-likely that C compilers will not hazard two virtual addresses differing
-only in the upper byte.
diff --git a/Documentation/bpf/bpf_iterators.rst b/Documentation/bpf/bpf_iterators.rst
index 6d7770793fab7..07433915aa414 100644
--- a/Documentation/bpf/bpf_iterators.rst
+++ b/Documentation/bpf/bpf_iterators.rst
@@ -238,11 +238,8 @@ The following is the breakdown for each field in struct ``bpf_iter_reg``.
        that the kernel function cond_resched() is called to avoid other kernel
        subsystem (e.g., rcu) misbehaving.
    * - seq_info
-     - Specifies certain action requests in the kernel BPF iterator
-       infrastructure. Currently, only BPF_ITER_RESCHED is supported. This means
-       that the kernel function cond_resched() is called to avoid other kernel
-       subsystem (e.g., rcu) misbehaving.
-
+     - Specifies the set of seq operations for the BPF iterator and helpers to
+       initialize/free the private data for the corresponding ``seq_file``.
 
 `Click here
 <https://lore.kernel.org/bpf/20210212183107.50963-2-songliubraving@fb.com/>`_
diff --git a/Documentation/bpf/cpumasks.rst b/Documentation/bpf/cpumasks.rst
index 41efd8874eebc..3139c7c02e795 100644
--- a/Documentation/bpf/cpumasks.rst
+++ b/Documentation/bpf/cpumasks.rst
@@ -351,14 +351,15 @@ In addition to the above kfuncs, there is also a set of read-only kfuncs that
 can be used to query the contents of cpumasks.
 
 .. kernel-doc:: kernel/bpf/cpumask.c
-   :identifiers: bpf_cpumask_first bpf_cpumask_first_zero bpf_cpumask_test_cpu
+   :identifiers: bpf_cpumask_first bpf_cpumask_first_zero bpf_cpumask_first_and
+                 bpf_cpumask_test_cpu
 
 .. kernel-doc:: kernel/bpf/cpumask.c
    :identifiers: bpf_cpumask_equal bpf_cpumask_intersects bpf_cpumask_subset
                  bpf_cpumask_empty bpf_cpumask_full
 
 .. kernel-doc:: kernel/bpf/cpumask.c
-   :identifiers: bpf_cpumask_any bpf_cpumask_any_and
+   :identifiers: bpf_cpumask_any_distribute bpf_cpumask_any_and_distribute
 
 ----
 
diff --git a/Documentation/bpf/instruction-set.rst b/Documentation/bpf/instruction-set.rst
index 492980ece1abe..6644842cd3ea1 100644
--- a/Documentation/bpf/instruction-set.rst
+++ b/Documentation/bpf/instruction-set.rst
@@ -163,13 +163,13 @@ BPF_MUL   0x20   dst \*= src
 BPF_DIV   0x30   dst = (src != 0) ? (dst / src) : 0
 BPF_OR    0x40   dst \|= src
 BPF_AND   0x50   dst &= src
-BPF_LSH   0x60   dst <<= src
-BPF_RSH   0x70   dst >>= src
+BPF_LSH   0x60   dst <<= (src & mask)
+BPF_RSH   0x70   dst >>= (src & mask)
 BPF_NEG   0x80   dst = ~src
 BPF_MOD   0x90   dst = (src != 0) ? (dst % src) : dst
 BPF_XOR   0xa0   dst ^= src
 BPF_MOV   0xb0   dst = src
-BPF_ARSH  0xc0   sign extending shift right
+BPF_ARSH  0xc0   sign extending dst >>= (src & mask)
 BPF_END   0xd0   byte swap operations (see `Byte swap instructions`_ below)
 ========  =====  ==========================================================
 
@@ -204,6 +204,9 @@ for ``BPF_ALU64``, 'imm' is first sign extended to 64 bits and the result
 interpreted as an unsigned 64-bit value. There are no instructions for
 signed division or modulo.
 
+Shift operations use a mask of 0x3F (63) for 64-bit operations and 0x1F (31)
+for 32-bit operations.
+
 Byte swap instructions
 ~~~~~~~~~~~~~~~~~~~~~~
 
diff --git a/Documentation/bpf/kfuncs.rst b/Documentation/bpf/kfuncs.rst
index ea2516374d92e..0d2647fb358d7 100644
--- a/Documentation/bpf/kfuncs.rst
+++ b/Documentation/bpf/kfuncs.rst
@@ -100,7 +100,7 @@ Hence, whenever a constant scalar argument is accepted by a kfunc which is not a
 size parameter, and the value of the constant matters for program safety, __k
 suffix should be used.
 
-2.2.2 __uninit Annotation
+2.2.3 __uninit Annotation
 -------------------------
 
 This annotation is used to indicate that the argument will be treated as
@@ -117,6 +117,27 @@ Here, the dynptr will be treated as an uninitialized dynptr. Without this
 annotation, the verifier will reject the program if the dynptr passed in is
 not initialized.
 
+2.2.4 __opt Annotation
+-------------------------
+
+This annotation is used to indicate that the buffer associated with an __sz or __szk
+argument may be null. If the function is passed a nullptr in place of the buffer,
+the verifier will not check that length is appropriate for the buffer. The kfunc is
+responsible for checking if this buffer is null before using it.
+
+An example is given below::
+
+        __bpf_kfunc void *bpf_dynptr_slice(..., void *buffer__opt, u32 buffer__szk)
+        {
+        ...
+        }
+
+Here, the buffer may be null. If buffer is not null, it at least of size buffer_szk.
+Either way, the returned buffer is either NULL, or of size buffer_szk. Without this
+annotation, the verifier will reject the program if a null pointer is passed in with
+a nonzero size.
+
+
 .. _BPF_kfunc_nodef:
 
 2.3 Using an existing kernel function
@@ -206,23 +227,49 @@ absolutely no ABI stability guarantees.
 
 As mentioned above, a nested pointer obtained from walking a trusted pointer is
 no longer trusted, with one exception. If a struct type has a field that is
-guaranteed to be valid as long as its parent pointer is trusted, the
-``BTF_TYPE_SAFE_NESTED`` macro can be used to express that to the verifier as
-follows:
+guaranteed to be valid (trusted or rcu, as in KF_RCU description below) as long
+as its parent pointer is valid, the following macros can be used to express
+that to the verifier:
+
+* ``BTF_TYPE_SAFE_TRUSTED``
+* ``BTF_TYPE_SAFE_RCU``
+* ``BTF_TYPE_SAFE_RCU_OR_NULL``
+
+For example,
+
+.. code-block:: c
+
+	BTF_TYPE_SAFE_TRUSTED(struct socket) {
+		struct sock *sk;
+	};
+
+or
 
 .. code-block:: c
 
-	BTF_TYPE_SAFE_NESTED(struct task_struct) {
+	BTF_TYPE_SAFE_RCU(struct task_struct) {
 		const cpumask_t *cpus_ptr;
+		struct css_set __rcu *cgroups;
+		struct task_struct __rcu *real_parent;
+		struct task_struct *group_leader;
 	};
 
 In other words, you must:
 
-1. Wrap the trusted pointer type in the ``BTF_TYPE_SAFE_NESTED`` macro.
+1. Wrap the valid pointer type in a ``BTF_TYPE_SAFE_*`` macro.
 
-2. Specify the type and name of the trusted nested field. This field must match
+2. Specify the type and name of the valid nested field. This field must match
    the field in the original type definition exactly.
 
+A new type declared by a ``BTF_TYPE_SAFE_*`` macro also needs to be emitted so
+that it appears in BTF. For example, ``BTF_TYPE_SAFE_TRUSTED(struct socket)``
+is emitted in the ``type_is_trusted()`` function as follows:
+
+.. code-block:: c
+
+	BTF_TYPE_EMIT(BTF_TYPE_SAFE_TRUSTED(struct socket));
+
+
 2.4.5 KF_SLEEPABLE flag
 -----------------------
 
diff --git a/Documentation/bpf/llvm_reloc.rst b/Documentation/bpf/llvm_reloc.rst
index ca8957d5b6718..e4a777a6a3a24 100644
--- a/Documentation/bpf/llvm_reloc.rst
+++ b/Documentation/bpf/llvm_reloc.rst
@@ -48,7 +48,7 @@ the code with ``llvm-objdump -dr test.o``::
       14:       0f 10 00 00 00 00 00 00 r0 += r1
       15:       95 00 00 00 00 00 00 00 exit
 
-There are four relations in the above for four ``LD_imm64`` instructions.
+There are four relocations in the above for four ``LD_imm64`` instructions.
 The following ``llvm-readelf -r test.o`` shows the binary values of the four
 relocations::
 
@@ -79,14 +79,16 @@ The following is the symbol table with ``llvm-readelf -s test.o``::
 The 6th entry is global variable ``g1`` with value 0.
 
 Similarly, the second relocation is at ``.text`` offset ``0x18``, instruction 3,
-for global variable ``g2`` which has a symbol value 4, the offset
-from the start of ``.data`` section.
-
-The third and fourth relocations refers to static variables ``l1``
-and ``l2``. From ``.rel.text`` section above, it is not clear
-which symbols they really refers to as they both refers to
+has a type of ``R_BPF_64_64`` and refers to entry 7 in the symbol table.
+The second relocation resolves to global variable ``g2`` which has a symbol
+value 4. The symbol value represents the offset from the start of ``.data``
+section where the initial value of the global variable ``g2`` is stored.
+
+The third and fourth relocations refer to static variables ``l1``
+and ``l2``. From the ``.rel.text`` section above, it is not clear
+to which symbols they really refer as they both refer to
 symbol table entry 4, symbol ``sec``, which has ``STT_SECTION`` type
-and represents a section. So for static variable or function,
+and represents a section. So for a static variable or function,
 the section offset is written to the original insn
 buffer, which is called ``A`` (addend). Looking at
 above insn ``7`` and ``11``, they have section offset ``8`` and ``12``.
diff --git a/Documentation/bpf/map_hash.rst b/Documentation/bpf/map_hash.rst
index 8669426264c67..d2343952f2cbd 100644
--- a/Documentation/bpf/map_hash.rst
+++ b/Documentation/bpf/map_hash.rst
@@ -1,5 +1,6 @@
 .. SPDX-License-Identifier: GPL-2.0-only
 .. Copyright (C) 2022 Red Hat, Inc.
+.. Copyright (C) 2022-2023 Isovalent, Inc.
 
 ===============================================
 BPF_MAP_TYPE_HASH, with PERCPU and LRU Variants
@@ -29,7 +30,16 @@ will automatically evict the least recently used entries when the hash
 table reaches capacity. An LRU hash maintains an internal LRU list that
 is used to select elements for eviction. This internal LRU list is
 shared across CPUs but it is possible to request a per CPU LRU list with
-the ``BPF_F_NO_COMMON_LRU`` flag when calling ``bpf_map_create``.
+the ``BPF_F_NO_COMMON_LRU`` flag when calling ``bpf_map_create``.  The
+following table outlines the properties of LRU maps depending on the a
+map type and the flags used to create the map.
+
+======================== ========================= ================================
+Flag                     ``BPF_MAP_TYPE_LRU_HASH`` ``BPF_MAP_TYPE_LRU_PERCPU_HASH``
+======================== ========================= ================================
+**BPF_F_NO_COMMON_LRU**  Per-CPU LRU, global map   Per-CPU LRU, per-cpu map
+**!BPF_F_NO_COMMON_LRU** Global LRU, global map    Global LRU, per-cpu map
+======================== ========================= ================================
 
 Usage
 =====
@@ -206,3 +216,44 @@ Userspace walking the map elements from the map declared above:
                     cur_key = &next_key;
             }
     }
+
+Internals
+=========
+
+This section of the document is targeted at Linux developers and describes
+aspects of the map implementations that are not considered stable ABI. The
+following details are subject to change in future versions of the kernel.
+
+``BPF_MAP_TYPE_LRU_HASH`` and variants
+--------------------------------------
+
+Updating elements in LRU maps may trigger eviction behaviour when the capacity
+of the map is reached. There are various steps that the update algorithm
+attempts in order to enforce the LRU property which have increasing impacts on
+other CPUs involved in the following operation attempts:
+
+- Attempt to use CPU-local state to batch operations
+- Attempt to fetch free nodes from global lists
+- Attempt to pull any node from a global list and remove it from the hashmap
+- Attempt to pull any node from any CPU's list and remove it from the hashmap
+
+This algorithm is described visually in the following diagram. See the
+description in commit 3a08c2fd7634 ("bpf: LRU List") for a full explanation of
+the corresponding operations:
+
+.. kernel-figure::  map_lru_hash_update.dot
+   :alt:    Diagram outlining the LRU eviction steps taken during map update.
+
+   LRU hash eviction during map update for ``BPF_MAP_TYPE_LRU_HASH`` and
+   variants. See the dot file source for kernel function name code references.
+
+Map updates start from the oval in the top right "begin ``bpf_map_update()``"
+and progress through the graph towards the bottom where the result may be
+either a successful update or a failure with various error codes. The key in
+the top right provides indicators for which locks may be involved in specific
+operations. This is intended as a visual hint for reasoning about how map
+contention may impact update operations, though the map type and flags may
+impact the actual contention on those locks, based on the logic described in
+the table above. For instance, if the map is created with type
+``BPF_MAP_TYPE_LRU_PERCPU_HASH`` and flags ``BPF_F_NO_COMMON_LRU`` then all map
+properties would be per-cpu.
diff --git a/Documentation/bpf/map_lru_hash_update.dot b/Documentation/bpf/map_lru_hash_update.dot
new file mode 100644
index 0000000000000..a0fee349d29c2
--- /dev/null
+++ b/Documentation/bpf/map_lru_hash_update.dot
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2022-2023 Isovalent, Inc.
+digraph {
+  node [colorscheme=accent4,style=filled] # Apply colorscheme to all nodes
+  graph [splines=ortho, nodesep=1]
+
+  subgraph cluster_key {
+    label = "Key\n(locks held during operation)";
+    rankdir = TB;
+
+    remote_lock [shape=rectangle,fillcolor=4,label="remote CPU LRU lock"]
+    hash_lock [shape=rectangle,fillcolor=3,label="hashtab lock"]
+    lru_lock [shape=rectangle,fillcolor=2,label="LRU lock"]
+    local_lock [shape=rectangle,fillcolor=1,label="local CPU LRU lock"]
+    no_lock [shape=rectangle,label="no locks held"]
+  }
+
+  begin [shape=oval,label="begin\nbpf_map_update()"]
+
+  // Nodes below with an 'fn_' prefix are roughly labeled by the C function
+  // names that initiate the corresponding logic in kernel/bpf/bpf_lru_list.c.
+  // Number suffixes and errno suffixes handle subsections of the corresponding
+  // logic in the function as of the writing of this dot.
+
+  // cf. __local_list_pop_free() / bpf_percpu_lru_pop_free()
+  local_freelist_check [shape=diamond,fillcolor=1,
+    label="Local freelist\nnode available?"];
+  use_local_node [shape=rectangle,
+    label="Use node owned\nby this CPU"]
+
+  // cf. bpf_lru_pop_free()
+  common_lru_check [shape=diamond,
+    label="Map created with\ncommon LRU?\n(!BPF_F_NO_COMMON_LRU)"];
+
+  fn_bpf_lru_list_pop_free_to_local [shape=rectangle,fillcolor=2,
+    label="Flush local pending,
+    Rotate Global list, move
+    LOCAL_FREE_TARGET
+    from global -> local"]
+  // Also corresponds to:
+  // fn__local_list_flush()
+  // fn_bpf_lru_list_rotate()
+  fn___bpf_lru_node_move_to_free[shape=diamond,fillcolor=2,
+    label="Able to free\nLOCAL_FREE_TARGET\nnodes?"]
+
+  fn___bpf_lru_list_shrink_inactive [shape=rectangle,fillcolor=3,
+    label="Shrink inactive list
+      up to remaining
+      LOCAL_FREE_TARGET
+      (global LRU -> local)"]
+  fn___bpf_lru_list_shrink [shape=diamond,fillcolor=2,
+    label="> 0 entries in\nlocal free list?"]
+  fn___bpf_lru_list_shrink2 [shape=rectangle,fillcolor=2,
+    label="Steal one node from
+      inactive, or if empty,
+      from active global list"]
+  fn___bpf_lru_list_shrink3 [shape=rectangle,fillcolor=3,
+    label="Try to remove\nnode from hashtab"]
+
+  local_freelist_check2 [shape=diamond,label="Htab removal\nsuccessful?"]
+  common_lru_check2 [shape=diamond,
+    label="Map created with\ncommon LRU?\n(!BPF_F_NO_COMMON_LRU)"];
+
+  subgraph cluster_remote_lock {
+    label = "Iterate through CPUs\n(start from current)";
+    style = dashed;
+    rankdir=LR;
+
+    local_freelist_check5 [shape=diamond,fillcolor=4,
+      label="Steal a node from\nper-cpu freelist?"]
+    local_freelist_check6 [shape=rectangle,fillcolor=4,
+      label="Steal a node from
+        (1) Unreferenced pending, or
+        (2) Any pending node"]
+    local_freelist_check7 [shape=rectangle,fillcolor=3,
+      label="Try to remove\nnode from hashtab"]
+    fn_htab_lru_map_update_elem [shape=diamond,
+      label="Stole node\nfrom remote\nCPU?"]
+    fn_htab_lru_map_update_elem2 [shape=diamond,label="Iterated\nall CPUs?"]
+    // Also corresponds to:
+    // use_local_node()
+    // fn__local_list_pop_pending()
+  }
+
+  fn_bpf_lru_list_pop_free_to_local2 [shape=rectangle,
+    label="Use node that was\nnot recently referenced"]
+  local_freelist_check4 [shape=rectangle,
+    label="Use node that was\nactively referenced\nin global list"]
+  fn_htab_lru_map_update_elem_ENOMEM [shape=oval,label="return -ENOMEM"]
+  fn_htab_lru_map_update_elem3 [shape=rectangle,
+    label="Use node that was\nactively referenced\nin (another?) CPU's cache"]
+  fn_htab_lru_map_update_elem4 [shape=rectangle,fillcolor=3,
+    label="Update hashmap\nwith new element"]
+  fn_htab_lru_map_update_elem5 [shape=oval,label="return 0"]
+  fn_htab_lru_map_update_elem_EBUSY [shape=oval,label="return -EBUSY"]
+  fn_htab_lru_map_update_elem_EEXIST [shape=oval,label="return -EEXIST"]
+  fn_htab_lru_map_update_elem_ENOENT [shape=oval,label="return -ENOENT"]
+
+  begin -> local_freelist_check
+  local_freelist_check -> use_local_node [xlabel="Y"]
+  local_freelist_check -> common_lru_check [xlabel="N"]
+  common_lru_check -> fn_bpf_lru_list_pop_free_to_local [xlabel="Y"]
+  common_lru_check -> fn___bpf_lru_list_shrink_inactive [xlabel="N"]
+  fn_bpf_lru_list_pop_free_to_local -> fn___bpf_lru_node_move_to_free
+  fn___bpf_lru_node_move_to_free ->
+    fn_bpf_lru_list_pop_free_to_local2 [xlabel="Y"]
+  fn___bpf_lru_node_move_to_free ->
+    fn___bpf_lru_list_shrink_inactive [xlabel="N"]
+  fn___bpf_lru_list_shrink_inactive -> fn___bpf_lru_list_shrink
+  fn___bpf_lru_list_shrink -> fn_bpf_lru_list_pop_free_to_local2 [xlabel = "Y"]
+  fn___bpf_lru_list_shrink -> fn___bpf_lru_list_shrink2 [xlabel="N"]
+  fn___bpf_lru_list_shrink2 -> fn___bpf_lru_list_shrink3
+  fn___bpf_lru_list_shrink3 -> local_freelist_check2
+  local_freelist_check2 -> local_freelist_check4 [xlabel = "Y"]
+  local_freelist_check2 -> common_lru_check2 [xlabel = "N"]
+  common_lru_check2 -> local_freelist_check5 [xlabel = "Y"]
+  common_lru_check2 -> fn_htab_lru_map_update_elem_ENOMEM [xlabel = "N"]
+  local_freelist_check5 -> fn_htab_lru_map_update_elem [xlabel = "Y"]
+  local_freelist_check5 -> local_freelist_check6 [xlabel = "N"]
+  local_freelist_check6 -> local_freelist_check7
+  local_freelist_check7 -> fn_htab_lru_map_update_elem
+
+  fn_htab_lru_map_update_elem -> fn_htab_lru_map_update_elem3 [xlabel = "Y"]
+  fn_htab_lru_map_update_elem -> fn_htab_lru_map_update_elem2  [xlabel = "N"]
+  fn_htab_lru_map_update_elem2 ->
+    fn_htab_lru_map_update_elem_ENOMEM [xlabel = "Y"]
+  fn_htab_lru_map_update_elem2 -> local_freelist_check5 [xlabel = "N"]
+  fn_htab_lru_map_update_elem3 -> fn_htab_lru_map_update_elem4
+
+  use_local_node -> fn_htab_lru_map_update_elem4
+  fn_bpf_lru_list_pop_free_to_local2 -> fn_htab_lru_map_update_elem4
+  local_freelist_check4 -> fn_htab_lru_map_update_elem4
+
+  fn_htab_lru_map_update_elem4 -> fn_htab_lru_map_update_elem5 [headlabel="Success"]
+  fn_htab_lru_map_update_elem4 ->
+    fn_htab_lru_map_update_elem_EBUSY [xlabel="Hashtab lock failed"]
+  fn_htab_lru_map_update_elem4 ->
+    fn_htab_lru_map_update_elem_EEXIST [xlabel="BPF_EXIST set and\nkey already exists"]
+  fn_htab_lru_map_update_elem4 ->
+    fn_htab_lru_map_update_elem_ENOENT [headlabel="BPF_NOEXIST set\nand no such entry"]
+
+  // Create invisible pad nodes to line up various nodes
+  pad0 [style=invis]
+  pad1 [style=invis]
+  pad2 [style=invis]
+  pad3 [style=invis]
+  pad4 [style=invis]
+
+  // Line up the key with the top of the graph
+  no_lock -> local_lock [style=invis]
+  local_lock -> lru_lock [style=invis]
+  lru_lock -> hash_lock [style=invis]
+  hash_lock -> remote_lock [style=invis]
+  remote_lock -> local_freelist_check5 [style=invis]
+  remote_lock -> fn___bpf_lru_list_shrink [style=invis]
+
+  // Line up return code nodes at the bottom of the graph
+  fn_htab_lru_map_update_elem -> pad0 [style=invis]
+  pad0 -> pad1 [style=invis]
+  pad1 -> pad2 [style=invis]
+  //pad2-> fn_htab_lru_map_update_elem_ENOMEM [style=invis]
+  fn_htab_lru_map_update_elem4 -> pad3 [style=invis]
+  pad3 -> fn_htab_lru_map_update_elem5  [style=invis]
+  pad3 -> fn_htab_lru_map_update_elem_EBUSY  [style=invis]
+  pad3 -> fn_htab_lru_map_update_elem_EEXIST  [style=invis]
+  pad3 -> fn_htab_lru_map_update_elem_ENOENT  [style=invis]
+
+  // Reduce diagram width by forcing some nodes to appear above others
+  local_freelist_check4 -> fn_htab_lru_map_update_elem3 [style=invis]
+  common_lru_check2 -> pad4 [style=invis]
+  pad4 -> local_freelist_check5 [style=invis]
+}
diff --git a/Documentation/bpf/map_sockmap.rst b/Documentation/bpf/map_sockmap.rst
index cc92047c66300..2d630686a00ba 100644
--- a/Documentation/bpf/map_sockmap.rst
+++ b/Documentation/bpf/map_sockmap.rst
@@ -240,11 +240,11 @@ offsets into ``msg``, respectively.
 If a program of type ``BPF_PROG_TYPE_SK_MSG`` is run on a ``msg`` it can only
 parse data that the (``data``, ``data_end``) pointers have already consumed.
 For ``sendmsg()`` hooks this is likely the first scatterlist element. But for
-calls relying on the ``sendpage`` handler (e.g., ``sendfile()``) this will be
-the range (**0**, **0**) because the data is shared with user space and by
-default the objective is to avoid allowing user space to modify data while (or
-after) BPF verdict is being decided. This helper can be used to pull in data
-and to set the start and end pointers to given values. Data will be copied if
+calls relying on MSG_SPLICE_PAGES (e.g., ``sendfile()``) this will be the
+range (**0**, **0**) because the data is shared with user space and by default
+the objective is to avoid allowing user space to modify data while (or after)
+BPF verdict is being decided. This helper can be used to pull in data and to
+set the start and end pointers to given values. Data will be copied if
 necessary (i.e., if data was not linear and if start and end pointers do not
 point to the same chunk).
 
diff --git a/Documentation/bpf/prog_cgroup_sockopt.rst b/Documentation/bpf/prog_cgroup_sockopt.rst
index 172f957204bf4..1226a94af07a8 100644
--- a/Documentation/bpf/prog_cgroup_sockopt.rst
+++ b/Documentation/bpf/prog_cgroup_sockopt.rst
@@ -98,10 +98,65 @@ can access only the first ``PAGE_SIZE`` of that data. So it has to options:
   indicates that the kernel should use BPF's trimmed ``optval``.
 
 When the BPF program returns with the ``optlen`` greater than
-``PAGE_SIZE``, the userspace will receive ``EFAULT`` errno.
+``PAGE_SIZE``, the userspace will receive original kernel
+buffers without any modifications that the BPF program might have
+applied.
 
 Example
 =======
 
+Recommended way to handle BPF programs is as follows:
+
+.. code-block:: c
+
+	SEC("cgroup/getsockopt")
+	int getsockopt(struct bpf_sockopt *ctx)
+	{
+		/* Custom socket option. */
+		if (ctx->level == MY_SOL && ctx->optname == MY_OPTNAME) {
+			ctx->retval = 0;
+			optval[0] = ...;
+			ctx->optlen = 1;
+			return 1;
+		}
+
+		/* Modify kernel's socket option. */
+		if (ctx->level == SOL_IP && ctx->optname == IP_FREEBIND) {
+			ctx->retval = 0;
+			optval[0] = ...;
+			ctx->optlen = 1;
+			return 1;
+		}
+
+		/* optval larger than PAGE_SIZE use kernel's buffer. */
+		if (ctx->optlen > PAGE_SIZE)
+			ctx->optlen = 0;
+
+		return 1;
+	}
+
+	SEC("cgroup/setsockopt")
+	int setsockopt(struct bpf_sockopt *ctx)
+	{
+		/* Custom socket option. */
+		if (ctx->level == MY_SOL && ctx->optname == MY_OPTNAME) {
+			/* do something */
+			ctx->optlen = -1;
+			return 1;
+		}
+
+		/* Modify kernel's socket option. */
+		if (ctx->level == SOL_IP && ctx->optname == IP_FREEBIND) {
+			optval[0] = ...;
+			return 1;
+		}
+
+		/* optval larger than PAGE_SIZE use kernel's buffer. */
+		if (ctx->optlen > PAGE_SIZE)
+			ctx->optlen = 0;
+
+		return 1;
+	}
+
 See ``tools/testing/selftests/bpf/progs/sockopt_sk.c`` for an example
 of BPF program that handles socket options.
diff --git a/Documentation/conf.py b/Documentation/conf.py
index 37314afd1ac8a..d4fdf6a3875a8 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -74,6 +74,7 @@ if major >= 3:
             "__percpu",
             "__rcu",
             "__user",
+            "__force",
 
             # include/linux/compiler_attributes.h:
             "__alias",
diff --git a/Documentation/core-api/cpu_hotplug.rst b/Documentation/core-api/cpu_hotplug.rst
index f75778d374884..e6f5bc39cf5c6 100644
--- a/Documentation/core-api/cpu_hotplug.rst
+++ b/Documentation/core-api/cpu_hotplug.rst
@@ -127,17 +127,8 @@ bring CPU4 back online::
  $ echo 1 > /sys/devices/system/cpu/cpu4/online
  smpboot: Booting Node 0 Processor 4 APIC 0x1
 
-The CPU is usable again. This should work on all CPUs. CPU0 is often special
-and excluded from CPU hotplug. On X86 the kernel option
-*CONFIG_BOOTPARAM_HOTPLUG_CPU0* has to be enabled in order to be able to
-shutdown CPU0. Alternatively the kernel command option *cpu0_hotplug* can be
-used. Some known dependencies of CPU0:
-
-* Resume from hibernate/suspend. Hibernate/suspend will fail if CPU0 is offline.
-* PIC interrupts. CPU0 can't be removed if a PIC interrupt is detected.
-
-Please let Fenghua Yu <fenghua.yu@intel.com> know if you find any dependencies
-on CPU0.
+The CPU is usable again. This should work on all CPUs, but CPU0 is often special
+and excluded from CPU hotplug.
 
 The CPU hotplug coordination
 ============================
diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst
index 9b3f3e5f5a959..f2bcc5a7ea432 100644
--- a/Documentation/core-api/kernel-api.rst
+++ b/Documentation/core-api/kernel-api.rst
@@ -96,6 +96,12 @@ Command-line Parsing
 .. kernel-doc:: lib/cmdline.c
    :export:
 
+Error Pointers
+--------------
+
+.. kernel-doc:: include/linux/err.h
+   :internal:
+
 Sorting
 -------
 
@@ -412,3 +418,15 @@ Read-Copy Update (RCU)
 .. kernel-doc:: include/linux/rcu_sync.h
 
 .. kernel-doc:: kernel/rcu/sync.c
+
+.. kernel-doc:: kernel/rcu/tasks.h
+
+.. kernel-doc:: kernel/rcu/tree_stall.h
+
+.. kernel-doc:: include/linux/rcupdate_trace.h
+
+.. kernel-doc:: include/linux/rcupdate_wait.h
+
+.. kernel-doc:: include/linux/rcuref.h
+
+.. kernel-doc:: include/linux/rcutree.h
diff --git a/Documentation/core-api/pin_user_pages.rst b/Documentation/core-api/pin_user_pages.rst
index 9fb0b1080d3b8..d3c1f6d8c0e0e 100644
--- a/Documentation/core-api/pin_user_pages.rst
+++ b/Documentation/core-api/pin_user_pages.rst
@@ -112,6 +112,12 @@ pages:
 This also leads to limitations: there are only 31-10==21 bits available for a
 counter that increments 10 bits at a time.
 
+* Because of that limitation, special handling is applied to the zero pages
+  when using FOLL_PIN.  We only pretend to pin a zero page - we don't alter its
+  refcount or pincount at all (it is permanent, so there's no need).  The
+  unpinning functions also don't do anything to a zero page.  This is
+  transparent to the caller.
+
 * Callers must specifically request "dma-pinned tracking of pages". In other
   words, just calling get_user_pages() will not suffice; a new set of functions,
   pin_user_page() and related, must be used.
diff --git a/Documentation/core-api/this_cpu_ops.rst b/Documentation/core-api/this_cpu_ops.rst
index 5cb8b883ae832..91acbcf30e9bd 100644
--- a/Documentation/core-api/this_cpu_ops.rst
+++ b/Documentation/core-api/this_cpu_ops.rst
@@ -53,7 +53,6 @@ preemption and interrupts::
 	this_cpu_add_return(pcp, val)
 	this_cpu_xchg(pcp, nval)
 	this_cpu_cmpxchg(pcp, oval, nval)
-	this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
 	this_cpu_sub(pcp, val)
 	this_cpu_inc(pcp)
 	this_cpu_dec(pcp)
@@ -242,7 +241,6 @@ safe::
 	__this_cpu_add_return(pcp, val)
 	__this_cpu_xchg(pcp, nval)
 	__this_cpu_cmpxchg(pcp, oval, nval)
-	__this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
 	__this_cpu_sub(pcp, val)
 	__this_cpu_inc(pcp)
 	__this_cpu_dec(pcp)
diff --git a/Documentation/core-api/workqueue.rst b/Documentation/core-api/workqueue.rst
index 8ec4d6270b24e..a4c9b9d1905f4 100644
--- a/Documentation/core-api/workqueue.rst
+++ b/Documentation/core-api/workqueue.rst
@@ -348,6 +348,37 @@ Guidelines
   level of locality in wq operations and work item execution.
 
 
+Monitoring
+==========
+
+Use tools/workqueue/wq_monitor.py to monitor workqueue operations: ::
+
+  $ tools/workqueue/wq_monitor.py events
+                              total  infl  CPUtime  CPUhog  CMwake  mayday rescued
+  events                      18545     0      6.1       0       5       -       -
+  events_highpri                  8     0      0.0       0       0       -       -
+  events_long                     3     0      0.0       0       0       -       -
+  events_unbound              38306     0      0.1       -       -       -       -
+  events_freezable                0     0      0.0       0       0       -       -
+  events_power_efficient      29598     0      0.2       0       0       -       -
+  events_freezable_power_        10     0      0.0       0       0       -       -
+  sock_diag_events                0     0      0.0       0       0       -       -
+
+                              total  infl  CPUtime  CPUhog  CMwake  mayday rescued
+  events                      18548     0      6.1       0       5       -       -
+  events_highpri                  8     0      0.0       0       0       -       -
+  events_long                     3     0      0.0       0       0       -       -
+  events_unbound              38322     0      0.1       -       -       -       -
+  events_freezable                0     0      0.0       0       0       -       -
+  events_power_efficient      29603     0      0.2       0       0       -       -
+  events_freezable_power_        10     0      0.0       0       0       -       -
+  sock_diag_events                0     0      0.0       0       0       -       -
+
+  ...
+
+See the command's help message for more info.
+
+
 Debugging
 =========
 
@@ -387,6 +418,7 @@ the stack trace of the offending worker thread. ::
 The work item's function should be trivially visible in the stack
 trace.
 
+
 Non-reentrance Conditions
 =========================
 
diff --git a/Documentation/crypto/async-tx-api.rst b/Documentation/crypto/async-tx-api.rst
index bfc773991bdc5..27c146b54d713 100644
--- a/Documentation/crypto/async-tx-api.rst
+++ b/Documentation/crypto/async-tx-api.rst
@@ -66,7 +66,7 @@ features surfaced as a result:
 ::
 
   struct dma_async_tx_descriptor *
-  async_<operation>(<op specific parameters>, struct async_submit ctl *submit)
+  async_<operation>(<op specific parameters>, struct async_submit_ctl *submit)
 
 3.2 Supported operations
 ------------------------
diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst
index e66916a483cdb..f4acf9c2e90f6 100644
--- a/Documentation/dev-tools/kasan.rst
+++ b/Documentation/dev-tools/kasan.rst
@@ -107,9 +107,12 @@ effectively disables ``panic_on_warn`` for KASAN reports.
 Alternatively, independent of ``panic_on_warn``, the ``kasan.fault=`` boot
 parameter can be used to control panic and reporting behaviour:
 
-- ``kasan.fault=report`` or ``=panic`` controls whether to only print a KASAN
-  report or also panic the kernel (default: ``report``). The panic happens even
-  if ``kasan_multi_shot`` is enabled.
+- ``kasan.fault=report``, ``=panic``, or ``=panic_on_write`` controls whether
+  to only print a KASAN report, panic the kernel, or panic the kernel on
+  invalid writes only (default: ``report``). The panic happens even if
+  ``kasan_multi_shot`` is enabled. Note that when using asynchronous mode of
+  Hardware Tag-Based KASAN, ``kasan.fault=panic_on_write`` always panics on
+  asynchronously checked accesses (including reads).
 
 Software and Hardware Tag-Based KASAN modes (see the section about various
 modes below) support altering stack trace collection behavior:
diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst
index 12b575b76b20b..deede972f2547 100644
--- a/Documentation/dev-tools/kselftest.rst
+++ b/Documentation/dev-tools/kselftest.rst
@@ -36,6 +36,7 @@ Running the selftests (hotplug tests are run in limited mode)
 
 To build the tests::
 
+  $ make headers
   $ make -C tools/testing/selftests
 
 To run the tests::
@@ -168,6 +169,28 @@ the `-t` option for specific single tests. Either can be used multiple times::
 
 For other features see the script usage output, seen with the `-h` option.
 
+Timeout for selftests
+=====================
+
+Selftests are designed to be quick and so a default timeout is used of 45
+seconds for each test. Tests can override the default timeout by adding
+a settings file in their directory and set a timeout variable there to the
+configured a desired upper timeout for the test. Only a few tests override
+the timeout with a value higher than 45 seconds, selftests strives to keep
+it that way. Timeouts in selftests are not considered fatal because the
+system under which a test runs may change and this can also modify the
+expected time it takes to run a test. If you have control over the systems
+which will run the tests you can configure a test runner on those systems to
+use a greater or lower timeout on the command line as with the `-o` or
+the `--override-timeout` argument. For example to use 165 seconds instead
+one would use:
+
+   $ ./run_kselftest.sh --override-timeout 165
+
+You can look at the TAP output to see if you ran into the timeout. Test
+runners which know a test must run under a specific time can then optionally
+treat these timeouts then as fatal.
+
 Packaging selftests
 ===================
 
diff --git a/Documentation/dev-tools/kunit/architecture.rst b/Documentation/dev-tools/kunit/architecture.rst
index e95ab05342bb9..f335f883f8f69 100644
--- a/Documentation/dev-tools/kunit/architecture.rst
+++ b/Documentation/dev-tools/kunit/architecture.rst
@@ -119,9 +119,9 @@ All expectations/assertions are formatted as:
 	  terminated immediately.
 
 		- Assertions call the function:
-		  ``void __noreturn kunit_abort(struct kunit *)``.
+		  ``void __noreturn __kunit_abort(struct kunit *)``.
 
-		- ``kunit_abort`` calls the function:
+		- ``__kunit_abort`` calls the function:
 		  ``void __noreturn kunit_try_catch_throw(struct kunit_try_catch *try_catch)``.
 
 		- ``kunit_try_catch_throw`` calls the function:
diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst
index c736613c9b199..a98235326bab0 100644
--- a/Documentation/dev-tools/kunit/start.rst
+++ b/Documentation/dev-tools/kunit/start.rst
@@ -250,15 +250,20 @@ Now we are ready to write the test cases.
 	};
 	kunit_test_suite(misc_example_test_suite);
 
+	MODULE_LICENSE("GPL");
+
 2. Add the following lines to ``drivers/misc/Kconfig``:
 
 .. code-block:: kconfig
 
 	config MISC_EXAMPLE_TEST
 		tristate "Test for my example" if !KUNIT_ALL_TESTS
-		depends on MISC_EXAMPLE && KUNIT=y
+		depends on MISC_EXAMPLE && KUNIT
 		default KUNIT_ALL_TESTS
 
+Note: If your test does not support being built as a loadable module (which is
+discouraged), replace tristate by bool, and depend on KUNIT=y instead of KUNIT.
+
 3. Add the following lines to ``drivers/misc/Makefile``:
 
 .. code-block:: make
diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst
index 9faf2b4153fc3..c27e1646ecd9c 100644
--- a/Documentation/dev-tools/kunit/usage.rst
+++ b/Documentation/dev-tools/kunit/usage.rst
@@ -121,6 +121,12 @@ there's an allocation error.
    ``return`` so they only work from the test function. In KUnit, we stop the
    current kthread on failure, so you can call them from anywhere.
 
+.. note::
+   Warning: There is an exception to the above rule. You shouldn't use assertions
+   in the suite's exit() function, or in the free function for a resource. These
+   run when a test is shutting down, and an assertion here prevents further
+   cleanup code from running, potentially leading to a memory leak.
+
 Customizing error messages
 --------------------------
 
@@ -160,7 +166,12 @@ many similar tests. In order to reduce duplication in these closely related
 tests, most unit testing frameworks (including KUnit) provide the concept of a
 *test suite*. A test suite is a collection of test cases for a unit of code
 with optional setup and teardown functions that run before/after the whole
-suite and/or every test case. For example:
+suite and/or every test case.
+
+.. note::
+   A test case will only run if it is associated with a test suite.
+
+For example:
 
 .. code-block:: c
 
@@ -190,7 +201,10 @@ after everything else. ``kunit_test_suite(example_test_suite)`` registers the
 test suite with the KUnit test framework.
 
 .. note::
-   A test case will only run if it is associated with a test suite.
+   The ``exit`` and ``suite_exit`` functions will run even if ``init`` or
+   ``suite_init`` fail. Make sure that they can handle any inconsistent
+   state which may result from ``init`` or ``suite_init`` encountering errors
+   or exiting early.
 
 ``kunit_test_suite(...)`` is a macro which tells the linker to put the
 specified test suite in a special linker section so that it can be run by KUnit
@@ -601,6 +615,57 @@ For example:
 		KUNIT_ASSERT_STREQ(test, buffer, "");
 	}
 
+Registering Cleanup Actions
+---------------------------
+
+If you need to perform some cleanup beyond simple use of ``kunit_kzalloc``,
+you can register a custom "deferred action", which is a cleanup function
+run when the test exits (whether cleanly, or via a failed assertion).
+
+Actions are simple functions with no return value, and a single ``void*``
+context argument, and fulfill the same role as "cleanup" functions in Python
+and Go tests, "defer" statements in languages which support them, and
+(in some cases) destructors in RAII languages.
+
+These are very useful for unregistering things from global lists, closing
+files or other resources, or freeing resources.
+
+For example:
+
+.. code-block:: C
+
+	static void cleanup_device(void *ctx)
+	{
+		struct device *dev = (struct device *)ctx;
+
+		device_unregister(dev);
+	}
+
+	void example_device_test(struct kunit *test)
+	{
+		struct my_device dev;
+
+		device_register(&dev);
+
+		kunit_add_action(test, &cleanup_device, &dev);
+	}
+
+Note that, for functions like device_unregister which only accept a single
+pointer-sized argument, it's possible to directly cast that function to
+a ``kunit_action_t`` rather than writing a wrapper function, for example:
+
+.. code-block:: C
+
+	kunit_add_action(test, (kunit_action_t *)&device_unregister, &dev);
+
+``kunit_add_action`` can fail if, for example, the system is out of memory.
+You can use ``kunit_add_action_or_reset`` instead which runs the action
+immediately if it cannot be deferred.
+
+If you need more control over when the cleanup function is called, you
+can trigger it early using ``kunit_release_action``, or cancel it entirely
+with ``kunit_remove_action``.
+
 
 Testing Static Functions
 ------------------------
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 274ee0890312e..08d59842655c7 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/amlogic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amlogic MesonX
+title: Amlogic SoC based Platforms
 
 maintainers:
   - Kevin Hilman <khilman@baylibre.com>
@@ -205,6 +205,13 @@ properties:
               - amlogic,ad401
           - const: amlogic,a1
 
+      - description: Boards with the Amlogic C3 C302X/C308L SoC
+        items:
+          - enum:
+              - amlogic,aw409
+              - amlogic,aw419
+          - const: amlogic,c3
+
       - description: Boards with the Amlogic Meson S4 S805X2 SoC
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
index 0c5b875cb654b..d6c84b6e7fe69 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
@@ -287,7 +287,7 @@ examples:
             arm,trig-in-sigs = <0 1>;
             arm,trig-in-types = <PE_DBGTRIGGER
                                  PE_PMUIRQ>;
-            arm,trig-out-sigs=<0 1 2 >;
+            arm,trig-out-sigs = <0 1 2 >;
             arm,trig-out-types = <PE_EDBGREQ
                                   PE_DBGRESTART
                                   PE_CTIIRQ>;
@@ -309,24 +309,24 @@ examples:
 
       trig-conns@0 {
         reg = <0>;
-        arm,trig-in-sigs=<0>;
-        arm,trig-in-types=<GEN_INTREQ>;
-        arm,trig-out-sigs=<0>;
-        arm,trig-out-types=<GEN_HALTREQ>;
+        arm,trig-in-sigs = <0>;
+        arm,trig-in-types = <GEN_INTREQ>;
+        arm,trig-out-sigs = <0>;
+        arm,trig-out-types = <GEN_HALTREQ>;
         arm,trig-conn-name = "sys_profiler";
       };
 
       trig-conns@1 {
         reg = <1>;
-        arm,trig-out-sigs=<2 3>;
-        arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-out-sigs = <2 3>;
+        arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
         arm,trig-conn-name = "watchdog";
       };
 
       trig-conns@2 {
         reg = <2>;
-        arm,trig-in-sigs=<1 6>;
-        arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-in-sigs = <1 6>;
+        arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>;
         arm,trig-conn-name = "g_counter";
       };
     };
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml
new file mode 100644
index 0000000000000..cb78cfa56702e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dummy-sink.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Dummy sink component
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight dummy sink component is for the specific coresight sink devices
+  kernel don't have permission to access or configure, e.g., CoreSight EUD on
+  Qualcomm platforms. It is a mini-USB hub implemented to support the USB-based
+  debug and trace capabilities. For this device, a dummy driver is needed to
+  register it as Coresight sink device in kernel side, so that path can be
+  created in the driver. Then the trace flow would be transferred to EUD via
+  coresight link of AP processor. It provides Coresight API for operations on
+  dummy source devices, such as enabling and disabling them. It also provides
+  the Coresight dummy source paths for debugging.
+
+  The primary use case of the coresight dummy sink is to build path in kernel
+  side for dummy sink component.
+
+maintainers:
+  - Mike Leach <mike.leach@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - James Clark <james.clark@arm.com>
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Hao Zhang <quic_hazha@quicinc.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,coresight-dummy-sink
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description: Input connection from the Coresight Trace bus to
+          dummy sink, such as Embedded USB debugger(EUD).
+
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - in-ports
+
+additionalProperties: false
+
+examples:
+  # Minimum dummy sink definition. Dummy sink connect to coresight replicator.
+  - |
+    sink {
+      compatible = "arm,coresight-dummy-sink";
+
+      in-ports {
+        port {
+          eud_in_replicator_swao: endpoint {
+            remote-endpoint = <&replicator_swao_out_eud>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml
new file mode 100644
index 0000000000000..5fedaed49a1f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dummy-source.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Dummy source component
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight dummy source component is for the specific coresight source
+  devices kernel don't have permission to access or configure. For some SOCs,
+  there would be Coresight source trace components on sub-processor which
+  are conneted to AP processor via debug bus. For these devices, a dummy driver
+  is needed to register them as Coresight source devices, so that paths can be
+  created in the driver. It provides Coresight API for operations on dummy
+  source devices, such as enabling and disabling them. It also provides the
+  Coresight dummy source paths for debugging.
+
+  The primary use case of the coresight dummy source is to build path in kernel
+  side for dummy source component.
+
+maintainers:
+  - Mike Leach <mike.leach@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - James Clark <james.clark@arm.com>
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Hao Zhang <quic_hazha@quicinc.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,coresight-dummy-source
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description: Output connection from the source to Coresight
+          Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  # Minimum dummy source definition. Dummy source connect to coresight funnel.
+  - |
+    source {
+      compatible = "arm,coresight-dummy-source";
+
+      out-ports {
+        port {
+          dummy_riscv_out_funnel_swao: endpoint {
+            remote-endpoint = <&funnel_swao_in_dummy_riscv>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
index 09c319f803ba4..cdd65881fcdd8 100644
--- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -122,14 +122,14 @@ properties:
   arm,vexpress,position:
     description: When daughterboards are stacked on one site, their position
       in the stack be be described this attribute.
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
 
   arm,vexpress,dcc:
     description: When describing tiles consisting of more than one DCC, its
       number can be specified with this attribute.
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
 
@@ -180,13 +180,13 @@ patternProperties:
               - const: simple-bus
           arm,v2m-memory-map:
             description: This describes the memory map type.
-            $ref: '/schemas/types.yaml#/definitions/string'
+            $ref: /schemas/types.yaml#/definitions/string
             enum:
               - rs1
               - rs2
 
           arm,hbi:
-            $ref: '/schemas/types.yaml#/definitions/uint32'
+            $ref: /schemas/types.yaml#/definitions/uint32
             description: This indicates the ARM HBI (Hardware Board ID), this is
               ARM's unique board model ID, visible on the PCB's silkscreen.
 
@@ -197,7 +197,7 @@ patternProperties:
               property, describing the physical location of the children nodes.
               0 means motherboard site, while 1 and 2 are daughterboard sites, and
               0xf means "sisterboard" which is the site containing the main CPU tile.
-            $ref: '/schemas/types.yaml#/definitions/uint32'
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 15
 
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index ab1b352344ae1..67a66bf748957 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -52,100 +52,6 @@ Example:
 		reg = <0xe3804000 0x1000>;
 };
 
-SHDWC Shutdown Controller
-
-required properties:
-- compatible: Should be "atmel,<chip>-shdwc".
-  <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-optional properties:
-- atmel,wakeup-mode: String, operation mode of the wakeup mode.
-  Supported values are: "none", "high", "low", "any".
-- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
-
-optional at91sam9260 properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9rl properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9x5 properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-
-Example:
-
-	shdwc@fffffd10 {
-		compatible = "atmel,at91sam9260-shdwc";
-		reg = <0xfffffd10 0x10>;
-		clocks = <&clk32k>;
-	};
-
-SHDWC SAMA5D2-Compatible Shutdown Controller
-
-1) shdwc node
-
-required properties:
-- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
-  "microchip,sama7g5-shdwc"
-- reg: should contain registers location and length
-- clocks: phandle to input clock.
-- #address-cells: should be one. The cell is the wake-up input index.
-- #size-cells: should be zero.
-
-optional properties:
-
-- debounce-delay-us: minimum wake-up inputs debouncer period in
-  microseconds. It's usually a board-related property.
-- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
-
-optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-The node contains child nodes for each wake-up input that the platform uses.
-
-2) input nodes
-
-Wake-up input nodes are usually described in the "board" part of the Device
-Tree. Note also that input 0 is linked to the wake-up pin and is frequently
-used.
-
-Required properties:
-- reg: should contain the wake-up input index [0 - 15].
-
-Optional properties:
-- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
-  by the child, forces the wake-up of the core power supply on a high level.
-  The default is to be active low.
-
-Example:
-
-On the SoC side:
-	shdwc@f8048010 {
-		compatible = "atmel,sama5d2-shdwc";
-		reg = <0xf8048010 0x10>;
-		clocks = <&clk32k>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		atmel,wakeup-rtc-timer;
-	};
-
-On the board side:
-	shdwc@f8048010 {
-		debounce-delay-us = <976>;
-
-		input@0 {
-			reg = <0>;
-		};
-
-		input@1 {
-			reg = <1>;
-			atmel,wakeup-active-high;
-		};
-	};
-
 Special Function Registers (SFR)
 
 Special Function Registers (SFR) manage specific aspects of the integrated
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
index 454b0e93245d8..5c3ac97e87286 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -25,13 +25,15 @@ properties:
           - enum:
               - asus,rt-ac56u
               - asus,rt-ac68u
+              - buffalo,wzr-1166dhp
+              - buffalo,wzr-1166dhp2
               - buffalo,wzr-1750dhp
               - linksys,ea6300-v1
               - linksys,ea6500-v2
-              - luxul,xap-1510v1
+              - luxul,xap-1510-v1
               - luxul,xwc-1000
-              - netgear,r6250v1
-              - netgear,r6300v2
+              - netgear,r6250-v1
+              - netgear,r6300-v2
               - smartrg,sr400ac
               - brcm,bcm94708
           - const: brcm,bcm4708
@@ -42,8 +44,8 @@ properties:
               - asus,rt-n18u
               - buffalo,wzr-600dhp2
               - buffalo,wzr-900dhp
-              - luxul,xap-1410v1
-              - luxul,xwr-1200v1
+              - luxul,xap-1410-v1
+              - luxul,xwr-1200-v1
               - tplink,archer-c5-v2
           - const: brcm,bcm47081
           - const: brcm,bcm4708
@@ -72,7 +74,7 @@ properties:
               - luxul,xap-1610-v1
               - luxul,xbr-4500-v1
               - luxul,xwc-2000-v1
-              - luxul,xwr-3100v1
+              - luxul,xwr-3100-v1
               - luxul,xwr-3150-v1
               - netgear,r8500
               - phicomm,k3
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index ff272e517d574..9e6a45eea4e5e 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -153,6 +153,7 @@ properties:
       - arm,cortex-r4
       - arm,cortex-r5
       - arm,cortex-r7
+      - arm,cortex-r52
       - arm,cortex-x1
       - arm,cortex-x1c
       - arm,cortex-x2
@@ -196,7 +197,7 @@ properties:
       - qcom,scorpion
 
   enable-method:
-    $ref: '/schemas/types.yaml#/definitions/string'
+    $ref: /schemas/types.yaml#/definitions/string
     oneOf:
       # On ARM v8 64-bit this property is required
       - enum:
@@ -245,8 +246,8 @@ properties:
 
   cpu-release-addr:
     oneOf:
-      - $ref: '/schemas/types.yaml#/definitions/uint32'
-      - $ref: '/schemas/types.yaml#/definitions/uint64'
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - $ref: /schemas/types.yaml#/definitions/uint64
     description:
       The DT specification defines this as 64-bit always, but some 32-bit Arm
       systems have used a 32-bit value which must be supported.
@@ -254,7 +255,7 @@ properties:
         property value of "spin-table".
 
   cpu-idle-states:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
       maxItems: 1
     description: |
@@ -270,7 +271,7 @@ properties:
   cci-control-port: true
 
   dynamic-power-coefficient:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       A u32 value that represents the running time dynamic
       power coefficient in units of uW/MHz/V^2. The
@@ -307,7 +308,7 @@ properties:
       PM domain provider, must be "psci".
 
   qcom,saw:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Specifies the SAW* node associated with this CPU.
 
@@ -317,7 +318,7 @@ properties:
       * arm/msm/qcom,saw2.txt
 
   qcom,acc:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Specifies the ACC* node associated with this CPU.
 
@@ -328,7 +329,7 @@ properties:
       * arm/msm/qcom,kpss-acc.txt
 
   rockchip,pmu:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Specifies the syscon node controlling the cpu core power domains.
 
@@ -338,7 +339,7 @@ properties:
       the cpu-core power-domains.
 
   secondary-boot-reg:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Required for systems that have an "enable-method" property value of
       "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 15d4110840654..2510eaa8906dd 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -726,6 +726,12 @@ properties:
           - const: dh,imx6ull-dhcor-som
           - const: fsl,imx6ull
 
+      - description: i.MX6ULL DHCOR SoM based Boards
+        items:
+          - const: marantec,imx6ull-dhcor-maveo-box
+          - const: dh,imx6ull-dhcor-som
+          - const: fsl,imx6ull
+
       - description: i.MX6ULL PHYTEC phyBOARD-Segin
         items:
           - enum:
@@ -901,6 +907,7 @@ properties:
               - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
               - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
+              - fsl,imx8mm-evkb           # i.MX8MM EVKB Board
               - gateworks,imx8mm-gw7904
               - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit
@@ -918,6 +925,12 @@ properties:
               - prt,prt8mm                # i.MX8MM Protonic PRT8MM Board
           - const: fsl,imx8mm
 
+      - description: Emtop i.MX8MM based Boards
+        items:
+          - const: ees,imx8mm-emtop-baseboard      # i.MX8MM Emtop SoM on i.MX8M Mini Baseboard V1
+          - const: ees,imx8mm-emtop-som            # i.MX8MM Emtop SOM-IMX8MMLPD4 module
+          - const: fsl,imx8mm
+
       - description: Engicam i.Core MX8M Mini SoM based boards
         items:
           - enum:
@@ -1019,6 +1032,7 @@ properties:
               - dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC
               - fsl,imx8mp-evk            # i.MX8MP EVK Board
               - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
+              - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board
               - polyhex,imx8mp-debix      # Polyhex Debix boards
               - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A Board
               - toradex,verdin-imx8mp     # Verdin iMX8M Plus Modules
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
index 91b96065f7dfc..86b59de7707ee 100644
--- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
@@ -96,8 +96,8 @@ examples:
       compatible = "ti,k2g-sci";
       ti,system-reboot-controller;
       mbox-names = "rx", "tx";
-      mboxes= <&msgmgr 5 2>,
-              <&msgmgr 0 0>;
+      mboxes = <&msgmgr 5 2>,
+               <&msgmgr 0 0>;
       reg-names = "debug_messages";
       reg = <0x02921800 0x800>;
     };
@@ -107,8 +107,8 @@ examples:
       compatible = "ti,k2g-sci";
       ti,host-id = <12>;
       mbox-names = "rx", "tx";
-      mboxes= <&secure_proxy_main 11>,
-              <&secure_proxy_main 13>;
+      mboxes = <&secure_proxy_main 11>,
+               <&secure_proxy_main 13>;
       reg-names = "debug_messages";
       reg = <0x44083000 0x1000>;
 
diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
deleted file mode 100644
index 6871483947c51..0000000000000
--- a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
+++ /dev/null
@@ -1,36 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/npcm/npcm.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NPCM Platforms
-
-maintainers:
-  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
-  - Tomer Maimon <tmaimon77@gmail.com>
-
-properties:
-  $nodename:
-    const: '/'
-  compatible:
-    oneOf:
-      - description: WPCM450 based boards
-        items:
-          - enum:
-              - supermicro,x9sci-ln4f-bmc   # Supermicro X9SCI-LN4F server's BMC
-          - const: nuvoton,wpcm450
-
-      - description: NPCM750 based boards
-        items:
-          - enum:
-              - nuvoton,npcm750-evb         # NPCM750 evaluation board
-          - const: nuvoton,npcm750
-
-      - description: NPCM845 based boards
-        items:
-          - enum:
-              - nuvoton,npcm845-evb         # NPCM845 evaluation board
-          - const: nuvoton,npcm845
-
-additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
deleted file mode 100644
index 94e72f25b3311..0000000000000
--- a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
+++ /dev/null
@@ -1,50 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/npcm/nuvoton,gcr.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Global Control Registers block in Nuvoton SoCs
-
-maintainers:
-  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
-  - Tomer Maimon <tmaimon77@gmail.com>
-
-description:
-  The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs
-  that expose misc functionality such as chip model and version information or
-  pinmux settings.
-
-properties:
-  compatible:
-    items:
-      - enum:
-          - nuvoton,wpcm450-gcr
-          - nuvoton,npcm750-gcr
-          - nuvoton,npcm845-gcr
-      - const: syscon
-      - const: simple-mfd
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-
-additionalProperties:
-  type: object
-
-examples:
-  - |
-    gcr: syscon@800000 {
-      compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd";
-      reg = <0x800000 0x1000>;
-
-      mux-controller {
-        compatible = "mmio-mux";
-        #mux-control-cells = <1>;
-        mux-reg-masks = <0x38 0x07>;
-        idle-states = <2>;
-      };
-    };
diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml
new file mode 100644
index 0000000000000..fb190db615250
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,ma35d1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35 series SoC based platforms
+
+maintainers:
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+description: |
+  Boards with an ARMv8 based Nuvoton MA35 series SoC shall have
+  the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: MA35D1 based boards
+        items:
+          - enum:
+              - nuvoton,ma35d1-iot
+              - nuvoton,ma35d1-som
+          - const: nuvoton,ma35d1
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml
new file mode 100644
index 0000000000000..d386744c88151
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,npcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NPCM Platforms
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: WPCM450 based boards
+        items:
+          - enum:
+              - supermicro,x9sci-ln4f-bmc   # Supermicro X9SCI-LN4F server's BMC
+          - const: nuvoton,wpcm450
+
+      - description: NPCM750 based boards
+        items:
+          - enum:
+              - nuvoton,npcm750-evb         # NPCM750 evaluation board
+          - const: nuvoton,npcm750
+
+      - description: NPCM845 based boards
+        items:
+          - enum:
+              - nuvoton,npcm845-evb         # NPCM845 evaluation board
+          - const: nuvoton,npcm845
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
index 3a2c908ff2820..0c5381e081bd2 100644
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -100,7 +100,7 @@ properties:
 
 patternProperties:
   "^power-domain-":
-    $ref: "../power/power-domain.yaml#"
+    $ref: /schemas/power/power-domain.yaml#
 
     type: object
     description: |
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index d9dd25695c3dd..450f616774e09 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -40,6 +40,7 @@ description: |
         msm8939
         msm8953
         msm8956
+        msm8960
         msm8974
         msm8976
         msm8992
@@ -69,6 +70,7 @@ description: |
         sdm845
         sdx55
         sdx65
+        sdx75
         sm4250
         sm6115
         sm6115p
@@ -85,9 +87,15 @@ description: |
   The 'board' element must be one of the following strings:
 
         adp
+        ap-al02-c2
+        ap-al02-c6
         ap-al02-c7
+        ap-al02-c8
+        ap-al02-c9
         ap-mi01.2
+        ap-mi01.3
         ap-mi01.6
+        ap-mi01.9
         cdp
         cp01-c1
         dragonboard
@@ -191,6 +199,7 @@ properties:
       - items:
           - enum:
               - qcom,msm8960-cdp
+              - samsung,expressatt
           - const: qcom,msm8960
 
       - items:
@@ -333,7 +342,9 @@ properties:
       - items:
           - enum:
               - qcom,ipq5332-ap-mi01.2
+              - qcom,ipq5332-ap-mi01.3
               - qcom,ipq5332-ap-mi01.6
+              - qcom,ipq5332-ap-mi01.9
           - const: qcom,ipq5332
 
       - items:
@@ -351,7 +362,11 @@ properties:
 
       - items:
           - enum:
+              - qcom,ipq9574-ap-al02-c2
+              - qcom,ipq9574-ap-al02-c6
               - qcom,ipq9574-ap-al02-c7
+              - qcom,ipq9574-ap-al02-c8
+              - qcom,ipq9574-ap-al02-c9
           - const: qcom,ipq9574
 
       - description: Sierra Wireless MangOH Green with WP8548 Module
@@ -380,9 +395,9 @@ properties:
               - qcom,qru1000-idp
           - const: qcom,qru1000
 
-      - description: Qualcomm Technologies, Inc. SC7180 IDP
-        items:
+      - items:
           - enum:
+              - acer,aspire1
               - qcom,sc7180-idp
           - const: qcom,sc7180
 
@@ -819,6 +834,11 @@ properties:
               - qcom,sdx65-mtp
           - const: qcom,sdx65
 
+      - items:
+          - enum:
+              - qcom,sdx75-idp
+          - const: qcom,sdx75
+
       - items:
           - enum:
               - qcom,ipq6018-cp01
@@ -882,6 +902,11 @@ properties:
           - const: qcom,qrb4210
           - const: qcom,sm4250
 
+      - items:
+          - enum:
+              - fxtec,pro1x
+          - const: qcom,sm6115
+
       - items:
           - enum:
               - lenovo,j606f
@@ -1042,6 +1067,7 @@ allOf:
               - qcom,sdm845
               - qcom,sdx55
               - qcom,sdx65
+              - qcom,sdx75
               - qcom,sm4250
               - qcom,sm6115
               - qcom,sm6125
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index ec141c937b8b9..ecdb72a519cbb 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -40,6 +40,11 @@ properties:
           - const: anbernic,rg353p
           - const: rockchip,rk3566
 
+      - description: Anbernic RG353PS
+        items:
+          - const: anbernic,rg353ps
+          - const: rockchip,rk3566
+
       - description: Anbernic RG353V
         items:
           - const: anbernic,rg353v
@@ -102,6 +107,12 @@ properties:
           - const: edgeble,neural-compute-module-6a     # Edgeble Neural Compute Module 6A SoM
           - const: rockchip,rk3588
 
+      - description: Edgeble Neural Compute Module 6(Neu6) Model B SoM based boards
+        items:
+          - const: edgeble,neural-compute-module-6b-io  # Edgeble Neural Compute Module 6B IO Board
+          - const: edgeble,neural-compute-module-6b     # Edgeble Neural Compute Module 6B SoM
+          - const: rockchip,rk3588
+
       - description: Elgin RV1108 R1
         items:
           - const: elgin,rv1108-r1
@@ -189,6 +200,7 @@ properties:
         items:
           - enum:
               - friendlyarm,nanopi-r2c
+              - friendlyarm,nanopi-r2c-plus
               - friendlyarm,nanopi-r2s
           - const: rockchip,rk3328
 
@@ -534,6 +546,11 @@ properties:
           - const: hugsun,x99
           - const: rockchip,rk3399
 
+      - description: Indiedroid Nova SBC
+        items:
+          - const: indiedroid,nova
+          - const: rockchip,rk3588s
+
       - description: Khadas Edge series boards
         items:
           - enum:
@@ -562,6 +579,13 @@ properties:
           - const: leez,p710
           - const: rockchip,rk3399
 
+      - description: Lunzn FastRhino R66S / R68S
+        items:
+          - enum:
+              - lunzn,fastrhino-r66s
+              - lunzn,fastrhino-r68s
+          - const: rockchip,rk3568
+
       - description: mqmaker MiQi
         items:
           - const: mqmaker,miqi
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index deb2cf9718718..e3ffd8159ab6c 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -72,6 +72,16 @@ properties:
           - const: samsung,exynos4210
           - const: samsung,exynos4
 
+      - description: Samsung Galaxy Tab3 family boards
+        items:
+          - enum:
+              - samsung,t310                    # Samsung Galaxy Tab 3 8.0 WiFi (SM-T310)
+              - samsung,t311                    # Samsung Galaxy Tab 3 8.0 3G (SM-T311)
+              - samsung,t315                    # Samsung Galaxy Tab 3 8.0 LTE (SM-T315)
+          - const: samsung,tab3
+          - const: samsung,exynos4212
+          - const: samsung,exynos4
+
       - description: Exynos4412 based boards
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml b/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml
new file mode 100644
index 0000000000000..72554a4f1c92e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/socionext/synquacer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext Synquacer platform
+
+maintainers:
+  - Masahisa Kojima <masahisa.kojima@linaro.org>
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+description:
+  Socionext SC2A11B (Synquacer) SoC based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - socionext,developer-box
+          - const: socionext,synquacer
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index ad8e51aa01b0c..b63ff591ef8f7 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -15,12 +15,13 @@ properties:
     oneOf:
       - items:
           - enum:
-              - st,stm32mp157-syscfg
-              - st,stm32mp151-pwr-mcu
-              - st,stm32-syscfg
               - st,stm32-power-config
+              - st,stm32-syscfg
               - st,stm32-tamp
               - st,stm32f4-gcan
+              - st,stm32mp151-pwr-mcu
+              - st,stm32mp157-syscfg
+              - st,stm32mp25-syscfg
           - const: syscon
       - items:
           - const: st,stm32-tamp
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 13e34241145b4..4466b455bffad 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -155,6 +155,18 @@ properties:
           - const: seeed,stm32mp157c-odyssey-som
           - const: st,stm32mp157
 
+      - description: Phytec STM32MP1 SoM based Boards
+        items:
+          - const: phytec,phycore-stm32mp1-3
+          - const: phytec,phycore-stm32mp157c-som
+          - const: st,stm32mp157
+
+      - description: ST STM32MP257 based Boards
+        items:
+          - enum:
+              - st,stm32mp257f-ev1
+          - const: st,stm32mp257
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 013821f4a7b8d..ee8fdd2da869a 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -305,6 +305,12 @@ properties:
           - const: allwinner,i12-tvbox
           - const: allwinner,sun7i-a20
 
+      - description: ICnova A20 ADB4006
+        items:
+          - const: incircuit,icnova-a20-adb4006
+          - const: incircuit,icnova-a20
+          - const: allwinner,sun7i-a20
+
       - description: ICNova A20 SWAC
         items:
           - const: incircuit,icnova-a20-swac
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
index 0df41f5b7e2a3..fcf956406168e 100644
--- a/Documentation/devicetree/bindings/arm/tegra.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -167,6 +167,11 @@ properties:
           - const: nvidia,p3737-0000+p3701-0000
           - const: nvidia,p3701-0000
           - const: nvidia,tegra234
+      - description: NVIDIA IGX Orin Development Kit
+        items:
+          - const: nvidia,p3740-0002+p3701-0008
+          - const: nvidia,p3701-0008
+          - const: nvidia,tegra234
       - description: Jetson Orin NX
         items:
           - const: nvidia,p3767-0000
@@ -176,5 +181,14 @@ properties:
           - const: nvidia,p3768-0000+p3767-0000
           - const: nvidia,p3767-0000
           - const: nvidia,tegra234
+      - description: Jetson Orin Nano
+        items:
+          - const: nvidia,p3767-0005
+          - const: nvidia,tegra234
+      - description: Jetson Orin Nano Developer Kit
+        items:
+          - const: nvidia,p3768-0000+p3767-0005
+          - const: nvidia,p3767-0005
+          - const: nvidia,tegra234
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
index e1183f90bb068..577eee95c8932 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -25,6 +25,12 @@ properties:
               - ti,am62a7-sk
           - const: ti,am62a7
 
+      - description: K3 AM625 SoC PHYTEC phyBOARD-Lyra
+        items:
+          - const: phytec,am625-phyboard-lyra-rdk
+          - const: phytec,am62-phycore-som
+          - const: ti,am625
+
       - description: K3 AM625 SoC
         items:
           - enum:
@@ -33,6 +39,26 @@ properties:
               - ti,am62-lp-sk
           - const: ti,am625
 
+      - description: K3 AM62x SoC Toradex Verdin Modules and Carrier Boards
+        items:
+          - enum:
+              - toradex,verdin-am62-nonwifi-dahlia # Verdin AM62 Module on Dahlia
+              - toradex,verdin-am62-nonwifi-dev    # Verdin AM62 Module on Verdin Development Board
+              - toradex,verdin-am62-nonwifi-yavia  # Verdin AM62 Module on Yavia
+          - const: toradex,verdin-am62-nonwifi     # Verdin AM62 Module without Wi-Fi / BT
+          - const: toradex,verdin-am62             # Verdin AM62 Module
+          - const: ti,am625
+
+      - description: K3 AM62x SoC Toradex Verdin Modules and Carrier Boards with Wi-Fi / BT
+        items:
+          - enum:
+              - toradex,verdin-am62-wifi-dahlia # Verdin AM62 Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-am62-wifi-dev    # Verdin AM62 Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-am62-wifi-yavia  # Verdin AM62 Wi-Fi / BT Module on Yavia
+          - const: toradex,verdin-am62-wifi     # Verdin AM62 Wi-Fi / BT Module
+          - const: toradex,verdin-am62          # Verdin AM62 Module
+          - const: ti,am625
+
       - description: K3 AM642 SoC
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt
index 61d77acbeb5ed..f925290d46415 100644
--- a/Documentation/devicetree/bindings/arm/xen.txt
+++ b/Documentation/devicetree/bindings/arm/xen.txt
@@ -56,7 +56,7 @@ hypervisor {
 };
 
 The format and meaning of the "xen,uefi-*" parameters are similar to those in
-Documentation/arm/uefi.rst, which are provided by the regular UEFI stub. However
+Documentation/arch/arm/uefi.rst, which are provided by the regular UEFI stub. However
 they differ because they are provided by the Xen hypervisor, together with a set
 of UEFI runtime services implemented via hypercalls, see
 http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,platform.h.html.
diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml
index 969cfe6dc4348..f57ed0347894b 100644
--- a/Documentation/devicetree/bindings/arm/xilinx.yaml
+++ b/Documentation/devicetree/bindings/arm/xilinx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx Zynq Platforms
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 description: |
   Xilinx boards with Zynq-7000 SOC or Zynq UltraScale+ MPSoC
@@ -61,10 +61,10 @@ properties:
           - const: xlnx,zynqmp-zc1254
           - const: xlnx,zynqmp
 
-      - description: Xilinx internal board zc1275
+      - description: Xilinx evaluation board zcu1275
         items:
-          - const: xlnx,zynqmp-zc1275-revA
-          - const: xlnx,zynqmp-zc1275
+          - const: xlnx,zynqmp-zcu1275-revA
+          - const: xlnx,zynqmp-zcu1275
           - const: xlnx,zynqmp
 
       - description: Xilinx 96boards compatible board zcu100
diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
index 71364c6081ff5..b29ce598f9aae 100644
--- a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
+++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Ceva AHCI SATA Controller
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@xilinx.com>
+  - Piyush Mehta <piyush.mehta@amd.com>
 
 description: |
   The Ceva SATA controller mostly conforms to the AHCI interface with some
diff --git a/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml
new file mode 100644
index 0000000000000..b5e5767d86988
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/rockchip,dwc-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller for Rockchip devices
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree bindings for the Synopsys DWC
+  implementation of the AHCI SATA controller found in Rockchip
+  devices.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3568-dwc-ahci
+          - rockchip,rk3588-dwc-ahci
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,rk3568-dwc-ahci
+          - rockchip,rk3588-dwc-ahci
+      - const: snps,dwc-ahci
+
+  ports-implemented:
+    const: 1
+
+  sata-port@0:
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    properties:
+      reg:
+        const: 0
+
+    unevaluatedProperties: false
+
+patternProperties:
+  "^sata-port@[1-9a-e]$": false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports-implemented
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3588-dwc-ahci
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          items:
+            - const: sata
+            - const: pmalive
+            - const: rxoob
+            - const: ref
+            - const: asic
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3568-dwc-ahci
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: sata
+            - const: pmalive
+            - const: rxoob
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/ata/ahci.h>
+    #include <dt-bindings/phy/phy.h>
+
+    sata@fe210000 {
+      compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+      reg = <0xfe210000 0x1000>;
+      clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
+               <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>,
+               <&cru CLK_PIPEPHY0_PIPE_ASIC_G>;
+      clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+      interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>;
+      ports-implemented = <0x1>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sata-port@0 {
+        reg = <0>;
+        hba-port-cap = <HBA_PORT_FBSCP>;
+        phys = <&combphy0_ps PHY_TYPE_SATA>;
+        phy-names = "sata-phy";
+        snps,rx-ts-max = <32>;
+        snps,tx-ts-max = <32>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
index c1457910520bf..34c5bf65b02d9 100644
--- a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
@@ -31,11 +31,11 @@ properties:
       PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx)
       clock, etc.
     minItems: 1
-    maxItems: 4
+    maxItems: 6
 
   clock-names:
     minItems: 1
-    maxItems: 4
+    maxItems: 6
     items:
       oneOf:
         - description: Application APB/AHB/AXI BIU clock
@@ -48,6 +48,10 @@ properties:
           const: pmalive
         - description: RxOOB detection clock
           const: rxoob
+        - description: PHY Transmit Clock
+          const: asic
+        - description: PHY Receive Clock
+          const: rbc
         - description: SATA Ports reference clock
           const: ref
 
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
index 5afa4b57ce20c..4c848fcb5a5d2 100644
--- a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
@@ -13,6 +13,15 @@ description:
   This document defines device tree bindings for the generic Synopsys DWC
   implementation of the AHCI SATA controller.
 
+select:
+  properties:
+    compatible:
+      enum:
+        - snps,dwc-ahci
+        - snps,spear-ahci
+  required:
+    - compatible
+
 allOf:
   - $ref: snps,dwc-ahci-common.yaml#
 
@@ -23,10 +32,6 @@ properties:
         const: snps,dwc-ahci
       - description: SPEAr1340 AHCI SATA device
         const: snps,spear-ahci
-      - description: Rockhip RK3568 AHCI controller
-        items:
-          - const: rockchip,rk3568-dwc-ahci
-          - const: snps,dwc-ahci
 
 patternProperties:
   "^sata-port@[0-9a-e]$":
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index 49304a1476abf..be95f6b97b41a 100644
--- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -40,6 +40,7 @@ properties:
   linux,keymap: true
 
   linux,no-autorepeat:
+    type: boolean
     description: Disable keyrepeat
 
   default-brightness-level:
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.yaml b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
index f089634f9466a..6d7bca6c138eb 100644
--- a/Documentation/devicetree/bindings/bus/ti-sysc.yaml
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
@@ -97,7 +97,7 @@ properties:
       - enum: [ ick, fck, sys_clk ]
       - items:
           - const: fck
-          - enum: [ ick. dbclk, osc, sys_clk, dss_clk, ahclkx ]
+          - enum: [ ick, dbclk, osc, sys_clk, dss_clk, ahclkx ]
       - items:
           - const: fck
           - const: phy-clk
diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml
new file mode 100644
index 0000000000000..6d84cee1bd756
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,a1-peripherals-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A1 Peripherals Clock Control Unit
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+  - Jian Hu <jian.hu@jian.hu.com>
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+properties:
+  compatible:
+    const: amlogic,a1-peripherals-clkc
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: input fixed pll div2
+      - description: input fixed pll div3
+      - description: input fixed pll div5
+      - description: input fixed pll div7
+      - description: input hifi pll
+      - description: input oscillator (usually at 24MHz)
+
+  clock-names:
+    items:
+      - const: fclk_div2
+      - const: fclk_div3
+      - const: fclk_div5
+      - const: fclk_div7
+      - const: hifi_pll
+      - const: xtal
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@800 {
+            compatible = "amlogic,a1-peripherals-clkc";
+            reg = <0 0x800 0 0x104>;
+            #clock-cells = <1>;
+            clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+                     <&clkc_pll CLKID_FCLK_DIV3>,
+                     <&clkc_pll CLKID_FCLK_DIV5>,
+                     <&clkc_pll CLKID_FCLK_DIV7>,
+                     <&clkc_pll CLKID_HIFI_PLL>,
+                     <&xtal>;
+            clock-names = "fclk_div2", "fclk_div3",
+                          "fclk_div5", "fclk_div7",
+                          "hifi_pll", "xtal";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
new file mode 100644
index 0000000000000..a59b188a8bf55
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A1 PLL Clock Control Unit
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+  - Jian Hu <jian.hu@jian.hu.com>
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+properties:
+  compatible:
+    const: amlogic,a1-pll-clkc
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: input fixpll_in
+      - description: input hifipll_in
+
+  clock-names:
+    items:
+      - const: fixpll_in
+      - const: hifipll_in
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@7c80 {
+            compatible = "amlogic,a1-pll-clkc";
+            reg = <0 0x7c80 0 0x18c>;
+            #clock-cells = <1>;
+            clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
+                     <&clkc_periphs CLKID_HIFIPLL_IN>;
+            clock-names = "fixpll_in", "hifipll_in";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
deleted file mode 100644
index 13f45db3b66d1..0000000000000
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Device Tree Clock bindings for arch-at91
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Slow Clock controller:
-
-Required properties:
-- compatible : shall be one of the following:
-	"atmel,at91sam9x5-sckc",
-	"atmel,sama5d3-sckc",
-	"atmel,sama5d4-sckc" or
-	"microchip,sam9x60-sckc":
-		at91 SCKC (Slow Clock Controller)
-- #clock-cells : shall be 1 for "microchip,sam9x60-sckc" otherwise shall be 0.
-- clocks : shall be the input parent clock phandle for the clock.
-
-Optional properties:
-- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
-  provided on XIN.
-
-For example:
-	sckc@fffffe50 {
-		compatible = "atmel,at91sam9x5-sckc";
-		reg = <0xfffffe50 0x4>;
-		clocks = <&slow_xtal>;
-		#clock-cells = <0>;
-	};
-
-Power Management Controller (PMC):
-
-Required properties:
-- compatible : shall be "atmel,<chip>-pmc", "syscon" or
-	"microchip,sam9x60-pmc"
-	<chip> can be: at91rm9200, at91sam9260, at91sam9261,
-	at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
-	at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
-	sama5d2, sama5d3 or sama5d4.
-- #clock-cells : from common clock binding; shall be set to 2. The first entry
-  is the type of the clock (core, system, peripheral or generated) and the
-  second entry its index as provided by the datasheet
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names: Must include the following entries: "slow_clk", "main_xtal"
-
-Optional properties:
-- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
-  provided on XIN.
-
-For example:
-	pmc: pmc@f0018000 {
-		compatible = "atmel,sama5d4-pmc", "syscon";
-		reg = <0xf0018000 0x120>;
-		interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-		#clock-cells = <2>;
-		clocks = <&clk32k>, <&main_xtal>;
-		clock-names = "slow_clk", "main_xtal";
-	};
diff --git a/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
new file mode 100644
index 0000000000000..c1bdcd9058edf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/atmel,at91rm9200-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Power Management Controller (PMC)
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  The power management controller optimizes power consumption by controlling all
+  system and user peripheral clocks. The PMC enables/disables the clock inputs
+  to many of the peripherals and to the processor.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: atmel,at91sam9g20-pmc
+          - const: atmel,at91sam9260-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - atmel,at91sam9g15-pmc
+              - atmel,at91sam9g25-pmc
+              - atmel,at91sam9g35-pmc
+              - atmel,at91sam9x25-pmc
+              - atmel,at91sam9x35-pmc
+          - const: atmel,at91sam9x5-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - atmel,at91rm9200-pmc
+              - atmel,at91sam9260-pmc
+              - atmel,at91sam9g45-pmc
+              - atmel,at91sam9n12-pmc
+              - atmel,at91sam9rl-pmc
+              - atmel,at91sam9x5-pmc
+              - atmel,sama5d2-pmc
+              - atmel,sama5d3-pmc
+              - atmel,sama5d4-pmc
+              - microchip,sam9x60-pmc
+              - microchip,sama7g5-pmc
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    description: |
+      - 1st cell is the clock type, one of PMC_TYPE_CORE, PMC_TYPE_SYSTEM,
+        PMC_TYPE_PERIPHERAL, PMC_TYPE_GCK, PMC_TYPE_PROGRAMMABLE (as defined
+        in <dt-bindings/clock/at91.h>)
+      - 2nd cell is the clock identifier as defined in <dt-bindings/clock/at91.h
+        (for core clocks) or as defined in datasheet (for system, peripheral,
+        gck and programmable clocks).
+    const: 2
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  atmel,osc-bypass:
+    description: set when a clock signal is directly provided on XIN
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sam9x60-pmc
+              - microchip,sama7g5-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: td_slck
+            - const: md_slck
+            - const: main_xtal
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,at91rm9200-pmc
+              - atmel,at91sam9260-pmc
+              - atmel,at91sam9g20-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: slow_xtal
+            - const: main_xtal
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,sama5d2-pmc
+              - atmel,sama5d3-pmc
+              - atmel,sama5d4-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: slow_clk
+            - const: main_xtal
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmc: clock-controller@f0018000 {
+        compatible = "atmel,sama5d4-pmc", "syscon";
+        reg = <0xf0018000 0x120>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+        #clock-cells = <2>;
+        clocks = <&clk32k>, <&main_xtal>;
+        clock-names = "slow_clk", "main_xtal";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml
new file mode 100644
index 0000000000000..7be29877e6d27
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/atmel,at91sam9x5-sckc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Slow Clock Controller (SCKC)
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,at91sam9x5-sckc
+          - atmel,sama5d3-sckc
+          - atmel,sama5d4-sckc
+          - microchip,sam9x60-sckc
+      - items:
+          - const: microchip,sama7g5-sckc
+          - const: microchip,sam9x60-sckc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    enum: [0, 1]
+
+  atmel,osc-bypass:
+    type: boolean
+    description: set when a clock signal is directly provided on XIN
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sam9x60-sckc
+    then:
+      properties:
+        "#clock-cells":
+          const: 1
+    else:
+      properties:
+        "#clock-cells":
+          const: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    clk32k: clock-controller@fffffe50 {
+        compatible = "microchip,sam9x60-sckc";
+        reg = <0xfffffe50 0x4>;
+        clocks = <&slow_xtal>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml
index 199818b2fb6df..cd0d763ce2f3e 100644
--- a/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/brcm,bcm63268-timer-clocks.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM63268 Timer Clock and Reset Device Tree Bindings
+title: Broadcom BCM63268 Timer Clock and Reset
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
index 0dbc1433fedee..80539f88bc270 100644
--- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
@@ -24,6 +24,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 2
+
   clocks:
     minItems: 6
     maxItems: 7
diff --git a/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
index ff9600474df20..0a6dc1a6e122f 100644
--- a/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx8mp-audiomix.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8MP AudioMIX Block Control Binding
+title: NXP i.MX8MP AudioMIX Block Control
 
 maintainers:
   - Marek Vasut <marex@denx.de>
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
index 9e733b10c392f..509df06b9c9d8 100644
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
@@ -98,9 +98,9 @@ required:
 
 patternProperties:
   "^usb-phy@[a-f0-9]+$":
-    allOf: [ $ref: "../phy/ingenic,phy-usb.yaml#" ]
+    $ref: /schemas/phy/ingenic,phy-usb.yaml#
   "^mac-phy-ctrl@[a-f0-9]+$":
-    allOf: [ $ref: "../net/ingenic,mac.yaml#" ]
+    $ref: /schemas/net/ingenic,mac.yaml#
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
new file mode 100644
index 0000000000000..ba7ffc5b16a0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mtmips-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTMIPS SoCs System Controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  MediaTek MIPS and Ralink SoCs provides a system controller to allow
+  to access to system control registers. These registers include clock
+  and reset related ones so this node is both clock and reset provider
+  for the rest of the world.
+
+  These SoCs have an XTAL from where the cpu clock is
+  provided as well as derived clocks for the bus and the peripherals.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ralink,mt7620-sysc
+          - ralink,mt7628-sysc
+          - ralink,mt7688-sysc
+          - ralink,rt2880-sysc
+          - ralink,rt3050-sysc
+          - ralink,rt3052-sysc
+          - ralink,rt3352-sysc
+          - ralink,rt3883-sysc
+          - ralink,rt5350-sysc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      The first cell indicates the clock number.
+    const: 1
+
+  '#reset-cells':
+    description:
+      The first cell indicates the reset bit within the register.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@0 {
+      compatible = "ralink,rt5350-sysc", "syscon";
+      reg = <0x0 0x100>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml
new file mode 100644
index 0000000000000..8f0c43683729b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,ma35d1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Clock Controller Module
+
+maintainers:
+  - Chi-Fang Li <cfli0@nuvoton.com>
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+description: |
+  The MA35D1 clock controller generates clocks for the whole chip,
+  including system clocks and all peripheral clocks.
+
+  See also:
+    include/dt-bindings/clock/ma35d1-clk.h
+
+properties:
+  compatible:
+    items:
+      - const: nuvoton,ma35d1-clk
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  nuvoton,pll-mode:
+    description:
+      A list of PLL operation mode corresponding to CAPLL, DDRPLL, APLL,
+      EPLL, and VPLL in sequential.
+    maxItems: 5
+    items:
+      enum:
+        - integer
+        - fractional
+        - spread-spectrum
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    clock-controller@40460200 {
+        compatible = "nuvoton,ma35d1-clk";
+        reg = <0x40460200 0x100>;
+        #clock-cells = <1>;
+        clocks = <&clk_hxt>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
index 659669bf224bd..9436266828afa 100644
--- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
@@ -19,6 +19,7 @@ properties:
       - qcom,ipq5332-a53pll
       - qcom,ipq6018-a53pll
       - qcom,ipq8074-a53pll
+      - qcom,ipq9574-a73pll
       - qcom,msm8916-a53pll
       - qcom,msm8939-a53pll
 
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
new file mode 100644
index 0000000000000..fe9fd4cb185f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8953.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8953
+
+maintainers:
+  - Adam Skladowski <a_skl39@protonmail.com>
+  - Sireesh Kodali <sireeshkodali@protonmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8953.
+
+  See also: include/dt-bindings/clock/qcom,gcc-msm8953.h
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8953
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: dsi1pll
+      - const: dsi1pllbyte
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    clock-controller@1800000 {
+        compatible = "qcom,gcc-msm8953";
+        reg = <0x01800000 0x80000>;
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                 <&sleep_clk>,
+                 <&dsi0_phy 1>,
+                 <&dsi0_phy 0>,
+                 <&dsi1_phy 1>,
+                 <&dsi1_phy 0>;
+        clock-names = "xo",
+                      "sleep",
+                      "dsi0pll",
+                      "dsi0pllbyte",
+                      "dsi1pll",
+                      "dsi1pllbyte";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
index ae01e77495342..ba969e7a57bfd 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
@@ -30,7 +30,6 @@ properties:
     enum:
       - qcom,gcc-ipq6018
       - qcom,gcc-mdm9607
-      - qcom,gcc-msm8953
       - qcom,gcc-mdm9615
 
 required:
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
index 06dce0c6b7d02..8bf9b6f495505 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -32,6 +32,10 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
+  power-domains:
+    items:
+      - description: CX domain
+
 required:
   - compatible
   - clocks
@@ -45,6 +49,8 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
     clock-controller@100000 {
       compatible = "qcom,gcc-sc7180";
       reg = <0x00100000 0x1f0000>;
@@ -52,6 +58,7 @@ examples:
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
       clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      power-domains = <&rpmhpd SC7180_CX>;
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
index 947b47168cecc..ff0b18bbb0fcb 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
@@ -43,6 +43,10 @@ properties:
       - const: ufs_phy_tx_symbol_0_clk
       - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
 
+  power-domains:
+    items:
+      - description: CX domain
+
 required:
   - compatible
   - clocks
@@ -56,6 +60,8 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
     clock-controller@100000 {
       compatible = "qcom,gcc-sc7280";
       reg = <0x00100000 0x1f0000>;
@@ -71,6 +77,7 @@ examples:
                      "pcie_1_pipe_clk", "ufs_phy_rx_symbol_0_clk",
                      "ufs_phy_rx_symbol_1_clk", "ufs_phy_tx_symbol_0_clk",
                      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+      power-domains = <&rpmhpd SC7280_CX>;
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
index b752542ee20ca..ead6665b9a45d 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
@@ -23,11 +23,13 @@ properties:
   clocks:
     items:
       - description: Board XO source
+      - description: Board active XO source
       - description: Sleep clock source
 
   clock-names:
     items:
       - const: bi_tcxo
+      - const: bi_tcxo_ao
       - const: sleep_clk
 
 required:
@@ -47,8 +49,9 @@ examples:
       compatible = "qcom,gcc-sm8250";
       reg = <0x00100000 0x1f0000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
-      clock-names = "bi_tcxo", "sleep_clk";
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
index 1e3dc9deded96..a00216b3b15a3 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -50,6 +50,9 @@ properties:
       - const: gcc_gpu_gpll0_clk_src
       - const: gcc_gpu_gpll0_div_clk_src
 
+  power-domains:
+    maxItems: 1
+
   '#clock-cells':
     const: 1
 
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
index afc68eb9d7cc2..944a0ea79cd6b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
@@ -7,6 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Global Clock & Reset Controller on IPQ9574
 
 maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
   - Anusha Rao <quic_anusha@quicinc.com>
 
 description: |
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index acf0c923c24f8..422f5776a7711 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -31,11 +31,11 @@ properties:
       - qcom,mmcc-sdm660
 
   clocks:
-    minItems: 8
+    minItems: 7
     maxItems: 13
 
   clock-names:
-    minItems: 8
+    minItems: 7
     maxItems: 13
 
   '#clock-cells':
@@ -99,6 +99,34 @@ allOf:
             - const: dsi2pllbyte
             - const: hdmipll
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8226
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 voted clock
+            - description: GFX3D clock source
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: mmss_gpll0_vote
+            - const: gpll0_vote
+            - const: gpll1_vote
+            - const: gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
index d5a250b7c2af3..267cf8c268233 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -27,6 +27,7 @@ properties:
       - qcom,sdm845-rpmh-clk
       - qcom,sdx55-rpmh-clk
       - qcom,sdx65-rpmh-clk
+      - qcom,sdx75-rpmh-clk
       - qcom,sm6350-rpmh-clk
       - qcom,sm8150-rpmh-clk
       - qcom,sm8250-rpmh-clk
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
new file mode 100644
index 0000000000000..3326dcd6766c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc8280xp-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller on SC8280XP
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm LPASS core and audio clock control module provides the clocks,
+  and reset on SC8280XP.
+
+  See also::
+    include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-lpassaudiocc
+      - qcom,sc8280xp-lpasscc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+    lpass_audiocc: clock-controller@32a9000 {
+        compatible = "qcom,sc8280xp-lpassaudiocc";
+        reg = <0x032a9000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+    lpasscc: clock-controller@33e0000 {
+        compatible = "qcom,sc8280xp-lpasscc";
+        reg = <0x033e0000 0x12000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml
new file mode 100644
index 0000000000000..98921fa236b18
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdx75-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SDX75
+
+maintainers:
+  - Imran Shaik <quic_imrashai@quicinc.com>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDX75
+
+  See also:: include/dt-bindings/clock/qcom,sdx75-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sdx75-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: EMAC0 sgmiiphy mac rclk source
+      - description: EMAC0 sgmiiphy mac tclk source
+      - description: EMAC0 sgmiiphy rclk source
+      - description: EMAC0 sgmiiphy tclk source
+      - description: EMAC1 sgmiiphy mac rclk source
+      - description: EMAC1 sgmiiphy mac tclk source
+      - description: EMAC1 sgmiiphy rclk source
+      - description: EMAC1 sgmiiphy tclk source
+      - description: PCIE20 phy aux clock source
+      - description: PCIE_1 Pipe clock source
+      - description: PCIE_2 Pipe clock source
+      - description: PCIE Pipe clock source
+      - description: USB3 phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@80000 {
+      compatible = "qcom,sdx75-gcc";
+      reg = <0x80000 0x1f7400>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, <&emac0_sgmiiphy_mac_rclk>,
+               <&emac0_sgmiiphy_mac_tclk>, <&emac0_sgmiiphy_rclk>, <&emac0_sgmiiphy_tclk>,
+               <&emac1_sgmiiphy_mac_rclk>, <&emac1_sgmiiphy_mac_tclk>, <&emac1_sgmiiphy_rclk>,
+               <&emac1_sgmiiphy_tclk>, <&pcie20_phy_aux_clk>, <&pcie_1_pipe_clk>,
+               <&pcie_2_pipe_clk>, <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml
index b480ead5bd695..cf4cad76f6c95 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml
@@ -27,9 +27,21 @@ properties:
       - description: GPLL0 div branch source
       - description: SNoC DVM GFX source
 
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the VDD_GX power rail
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required VDD_GX performance point.
+    maxItems: 1
+
 required:
   - compatible
   - clocks
+  - power-domains
+  - required-opps
 
 allOf:
   - $ref: qcom,gcc.yaml#
@@ -40,6 +52,7 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,sm6375-gcc.h>
     #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
 
     soc {
         #address-cells = <2>;
@@ -52,6 +65,8 @@ examples:
                      <&gcc GCC_GPU_GPLL0_CLK_SRC>,
                      <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>,
                      <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+            power-domains = <&rpmpd SM6375_VDDGX>;
+            required-opps = <&rpmpd_opp_low_svs>;
             #clock-cells = <1>;
             #reset-cells = <1>;
             #power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
new file mode 100644
index 0000000000000..23505c8c3dbd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8350-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Video Clock & Reset Controller
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,videocc-sm8350.h
+    include/dt-bindings/reset/qcom,videocc-sm8350.h
+
+properties:
+  compatible:
+    const: qcom,sm8350-videocc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Board sleep clock
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - required-opps
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    clock-controller@abf0000 {
+      compatible = "qcom,sm8350-videocc";
+      reg = <0x0abf0000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd SM8350_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
new file mode 100644
index 0000000000000..2320be920a5f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM8450
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,sm8450-gpucc.h
+    include/dt-bindings/clock/qcom,sm8550-gpucc.h
+    include/dt-bindings/reset/qcom,sm8450-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-gpucc
+      - qcom,sm8550-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@3d90000 {
+            compatible = "qcom,sm8450-gpucc";
+            reg = <0 0x03d90000 0 0xa000>;
+            clocks = <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
new file mode 100644
index 0000000000000..f1c6dd50f1841
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller on SM8450
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on SM8450.
+
+  See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-videocc
+      - qcom,sm8550-videocc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Video AHB clock from GCC
+
+  power-domains:
+    maxItems: 1
+    description:
+      MMCX power domain.
+
+  required-opps:
+    maxItems: 1
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - required-opps
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    videocc: clock-controller@aaf0000 {
+      compatible = "qcom,sm8450-videocc";
+      reg = <0x0aaf0000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_VIDEO_AHB_CLK>;
+      power-domains = <&rpmhpd SM8450_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
index 99686085f7513..26d94cedc871d 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
@@ -48,7 +48,7 @@ properties:
 patternProperties:
   "^dma-router@[a-f0-9]+$":
     type: object
-    $ref: "../dma/renesas,rzn1-dmamux.yaml#"
+    $ref: /schemas/dma/renesas,rzn1-dmamux.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
index 0589a63e273a1..a36781a455b65 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
@@ -24,6 +24,7 @@ properties:
           - samsung,exynos3250-cmu-dmc
           - samsung,exynos3250-cmu-isp
           - samsung,exynos4210-clock
+          - samsung,exynos4212-clock
           - samsung,exynos4412-clock
           - samsung,exynos5250-clock
       - items:
diff --git a/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
new file mode 100644
index 0000000000000..b2e40bd39a3af
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,am62-audio-refclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Audio Reference Clock
+
+maintainers:
+  - Jai Luthra <j-luthra@ti.com>
+
+properties:
+  compatible:
+    items:
+      - const: ti,am62-audio-refclk
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    audio_refclk0: clock@82e0 {
+        compatible = "ti,am62-audio-refclk";
+        reg = <0x82e0 0x4>;
+        clocks = <&k3_clks 157 0>;
+        assigned-clocks = <&k3_clks 157 0>;
+        assigned-clock-parents = <&k3_clks 157 8>;
+        #clock-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
index 66765116aff5d..64b8bce5962c2 100644
--- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
@@ -16,7 +16,6 @@ properties:
           - ti,am654-ehrpwm-tbclk
           - ti,am64-epwm-tbclk
           - ti,am62-epwm-tbclk
-      - const: syscon
 
   "#clock-cells":
     const: 1
@@ -33,8 +32,8 @@ additionalProperties: false
 
 examples:
   - |
-    ehrpwm_tbclk: syscon@4140 {
-        compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+    ehrpwm_tbclk: clock@4140 {
+        compatible = "ti,am654-ehrpwm-tbclk";
         reg = <0x4140 0x18>;
         #clock-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
index c1f04830a8329..02bd556bd91a6 100644
--- a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
+++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx clocking wizard
 
 maintainers:
-  - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
 
 description:
   The clocking wizard is a soft ip clocking block of Xilinx versal. It
diff --git a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
index 229af98b1d305..5cbb34d0b61b3 100644
--- a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
@@ -7,9 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx Versal clock controller
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
-  - Jolly Shah <jolly.shah@xilinx.com>
-  - Rajan Vaja <rajan.vaja@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 description: |
   The clock controller is a hardware block of Xilinx versal clock tree. It
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index ae515651fc6bb..1c4d3eb877635 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -168,6 +168,13 @@ properties:
       offer the power, Capability Mismatch is set. Required for power sink and
       power dual role.
 
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: OF graph bindings modeling a data bus to the connector, e.g.
+      there is a single High Speed (HS) port present in this connector. If there
+      is more than one bus (several port, with 'reg' property), they can be grouped
+      under 'ports'.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
     description: OF graph bindings modeling any data bus to the connector
@@ -322,6 +329,19 @@ examples:
         };
     };
 
+  # USB-C connector attached to SoC with a single High-Speed controller
+  - |
+    connector {
+        compatible = "usb-c-connector";
+        label = "USB-C";
+
+        port {
+            high_speed_ep: endpoint {
+                remote-endpoint = <&usb_hs_ep>;
+            };
+        };
+    };
+
   # USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220)
   # with SS 2:1 MUX. HS lines routed to SoC, SS lines routed to the MUX and
   # the output of MUX is connected to the SoC.
diff --git a/Documentation/devicetree/bindings/cpu/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml
index b8cc826c95013..b3a5356f9916e 100644
--- a/Documentation/devicetree/bindings/cpu/idle-states.yaml
+++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml
@@ -259,7 +259,7 @@ description: |+
       http://infocenter.arm.com/help/index.jsp
 
   [5] ARM Linux Kernel documentation - Booting AArch64 Linux
-      Documentation/arm64/booting.rst
+      Documentation/arch/arm64/booting.rst
 
   [6] RISC-V Linux Kernel documentation - CPUs bindings
       Documentation/devicetree/bindings/riscv/cpus.yaml
diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
index 6f5e7904181f1..7e1bb992ce909 100644
--- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
+++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
@@ -28,6 +28,7 @@ select:
           - qcom,apq8064
           - qcom,apq8096
           - qcom,ipq8064
+          - qcom,ipq8074
           - qcom,msm8939
           - qcom,msm8960
           - qcom,msm8974
diff --git a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
index ecf98a9e72b28..948e11ebe4eeb 100644
--- a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
@@ -19,8 +19,8 @@ properties:
 
   interrupts:
     items:
-      - description: "Interrupt for flow 0"
-      - description: "Interrupt for flow 1"
+      - description: Interrupt for flow 0
+      - description: Interrupt for flow 1
 
   clocks:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
index 286dffa0671b3..e879bc0be8e22 100644
--- a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
+++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
@@ -103,6 +103,12 @@ properties:
       wakeup-source: true
 
       linux,keycode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 116
+        deprecated: true
+
+      linux,keycodes:
+        maxItems: 1
         default: 116
 
     required:
diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
index 99be01539fcd0..8dd36c2f76fd2 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
+++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
@@ -11,9 +11,15 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx23-dcp
-      - fsl,imx28-dcp
+    oneOf:
+      - enum:
+          - fsl,imx23-dcp
+          - fsl,imx28-dcp
+      - items:
+          - enum:
+              - fsl,imx6sl-dcp
+              - fsl,imx6ull-dcp
+          - const: fsl,imx28-dcp
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
index e0fe63957888e..a4006237aa89f 100644
--- a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
@@ -2,8 +2,8 @@
 # Copyright 2018 Linaro Ltd.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Intel IXP4xx cryptographic engine
 
@@ -21,7 +21,7 @@ properties:
     const: intel,ixp4xx-crypto
 
   intel,npe-handle:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
       - items:
           - description: phandle to the NPE this crypto engine
diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
index e375bd9813009..bb828068c3b88 100644
--- a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
+++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
@@ -24,12 +24,20 @@ properties:
         deprecated: true
         description: Kept only for ABI backward compatibility
 
+      - items:
+          - enum:
+              - qcom,ipq4019-qce
+              - qcom,sm8150-qce
+          - const: qcom,qce
+
       - items:
           - enum:
               - qcom,ipq6018-qce
               - qcom,ipq8074-qce
               - qcom,msm8996-qce
+              - qcom,qcm2290-qce
               - qcom,sdm845-qce
+              - qcom,sm6115-qce
           - const: qcom,ipq4019-qce
           - const: qcom,qce
 
@@ -46,16 +54,12 @@ properties:
     maxItems: 1
 
   clocks:
-    items:
-      - description: iface clocks register interface.
-      - description: bus clocks data transfer interface.
-      - description: core clocks rest of the crypto block.
+    minItems: 1
+    maxItems: 3
 
   clock-names:
-    items:
-      - const: iface
-      - const: bus
-      - const: core
+    minItems: 1
+    maxItems: 3
 
   iommus:
     minItems: 1
@@ -89,9 +93,37 @@ allOf:
             enum:
               - qcom,crypto-v5.1
               - qcom,crypto-v5.4
-              - qcom,ipq4019-qce
+              - qcom,ipq6018-qce
+              - qcom,ipq8074-qce
+              - qcom,msm8996-qce
+              - qcom,sdm845-qce
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: iface
+            - const: bus
+            - const: core
+      required:
+        - clocks
+        - clock-names
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qce
+              - qcom,sm6115-qce
     then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: core
       required:
         - clocks
         - clock-names
diff --git a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml
new file mode 100644
index 0000000000000..71a2876bd6e49
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/starfive,jh7110-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive Cryptographic Module
+
+maintainers:
+  - Jia Jie Ho <jiajie.ho@starfivetech.com>
+  - William Qiu <william.qiu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-crypto
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Hardware reference clock
+      - description: AHB reference clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: ahb
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA channel
+      - description: RX DMA channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto: crypto@16000000 {
+        compatible = "starfive,jh7110-crypto";
+        reg = <0x16000000 0x4000>;
+        clocks = <&clk 15>, <&clk 16>;
+        clock-names = "hclk", "ahb";
+        interrupts = <28>;
+        resets = <&reset 3>;
+        dmas = <&dma 1 2>,
+               <&dma 0 2>;
+        dma-names = "tx", "rx";
+    };
+...
diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
index 9e8fbd02b150e..8aead97a585b1 100644
--- a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
+++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx ZynqMP AES-GCM Hardware Accelerator
 
 maintainers:
-  - Kalyani Akula <kalyani.akula@xilinx.com>
-  - Michal Simek <michal.simek@xilinx.com>
+  - Kalyani Akula <kalyani.akula@amd.com>
+  - Michal Simek <michal.simek@amd.com>
 
 description: |
   The ZynqMP AES-GCM hardened cryptographic accelerator is used to
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
new file mode 100644
index 0000000000000..a3428f0120059
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/amlogic,meson-g12a-dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic specific extensions to the Synopsys Designware MIPI DSI Host Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  The Amlogic Meson Synopsys Designware Integration is composed of
+  - A Synopsys DesignWare MIPI DSI Host Controller IP
+  - A TOP control block controlling the Clocks & Resets of the IP
+
+allOf:
+  - $ref: dsi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-g12a-dw-mipi-dsi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: pclk
+      - const: bit
+      - const: px
+      - const: meas
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: top
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: dphy
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI output node to panel.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dsi@6000 {
+          compatible = "amlogic,meson-g12a-dw-mipi-dsi";
+          reg = <0x6000 0x400>;
+          resets = <&reset_top>;
+          reset-names = "top";
+          clocks = <&clk_pclk>, <&bit_clk>, <&clk_px>;
+          clock-names = "pclk", "bit", "px";
+          phys = <&mipi_dphy>;
+          phy-names = "dphy";
+
+          ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              /* VPU VENC Input */
+              mipi_dsi_venc_port: port@0 {
+                  reg = <0>;
+
+                  mipi_dsi_in: endpoint {
+                       remote-endpoint = <&dpi_out>;
+                  };
+              };
+
+              /* DSI Output */
+              mipi_dsi_panel_port: port@1 {
+                  reg = <1>;
+
+                  mipi_out_panel: endpoint {
+                      remote-endpoint = <&mipi_in_panel>;
+                  };
+              };
+          };
+    };
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index 0c72120acc4f6..cb0a90f023219 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -96,6 +96,11 @@ properties:
     description:
       A port node pointing to the HDMI-TX port node.
 
+  port@2:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node pointing to the DPI port node (e.g. DSI or LVDS transceiver).
+
   "#address-cells":
     const: 1
 
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
index c9b06885cc63b..62f0521b09245 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
@@ -26,6 +26,7 @@ properties:
     const: dp
 
   force-hpd:
+    type: boolean
     description:
       Indicate driver need force hpd when hpd detect failed, this
       is used for some eDP screen which don not have a hpd signal.
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
index 6e0e3ba9b49ee..07388bf2b90df 100644
--- a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
@@ -17,6 +17,7 @@ description: |
 properties:
   compatible:
     enum:
+      - fsl,imx6sx-ldb
       - fsl,imx8mp-ldb
       - fsl,imx93-ldb
 
@@ -64,7 +65,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: fsl,imx93-ldb
+            enum:
+              - fsl,imx6sx-ldb
+              - fsl,imx93-ldb
     then:
       properties:
         ports:
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
index c4bf543974737..21d995f29a1e3 100644
--- a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
@@ -20,6 +20,7 @@ properties:
     maxItems: 1
 
   video-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 0x230145
     maximum: 0xffffff
     description:
diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
index e841659e20cda..4ed7a799ba26b 100644
--- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
@@ -70,7 +70,9 @@ properties:
   samsung,burst-clock-frequency:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
-      DSIM high speed burst mode frequency.
+      DSIM high speed burst mode frequency.  If absent,
+      the pixel clock from the attached device or bridge
+      will be used instead.
 
   samsung,esc-clock-frequency:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -80,7 +82,8 @@ properties:
   samsung,pll-clock-frequency:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
-      DSIM oscillator clock frequency.
+      DSIM oscillator clock frequency. If absent, the clock frequency
+      of sclk_mipi will be used instead.
 
   phys:
     maxItems: 1
@@ -100,20 +103,42 @@ properties:
           specified.
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description:
           DSI output port node to the panel or the next bridge
           in the chain.
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                uniqueItems: true
+                items:
+                  enum: [ 1, 2, 3, 4 ]
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 5
+                description:
+                  The Samsung MIPI DSI IP requires that all the data lanes have
+                  the same polarity.
+
+            dependencies:
+              lane-polarities: [data-lanes]
+
 required:
   - clock-names
   - clocks
   - compatible
   - interrupts
   - reg
-  - samsung,burst-clock-frequency
   - samsung,esc-clock-frequency
-  - samsung,pll-clock-frequency
 
 allOf:
   - $ref: ../dsi-controller.yaml#
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
index 81ca3cbc7abed..6c1de0b217228 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
@@ -21,6 +21,9 @@ properties:
     maxItems: 1
     description: virtual channel number of a DSI peripheral
 
+  reset-gpios:
+    maxItems: 1
+
   vddc-supply:
     description: Regulator for 1.2V internal core power.
 
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
index e1494b5007cba..0521261b04a9c 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -4,16 +4,24 @@
 $id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Toshiba TC358767 eDP bridge
+title: Toshiba TC358767/TC358867/TC9595 DSI/DPI/eDP bridge
 
 maintainers:
   - Andrey Gusakov <andrey.gusakov@cogentembedded.com>
 
-description: The TC358767 is bridge device which converts DSI/DPI to eDP/DP
+description: |
+  The TC358767/TC358867/TC9595 is bridge device which
+  converts DSI/DPI to eDP/DP .
 
 properties:
   compatible:
-    const: toshiba,tc358767
+    oneOf:
+      - items:
+          - enum:
+              - toshiba,tc358867
+              - toshiba,tc9595
+          - const: toshiba,tc358767
+      - const: toshiba,tc358767
 
   reg:
     enum:
diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
index 83c0d008265b3..3ee8f92259845 100644
--- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
+++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
@@ -36,6 +36,9 @@ properties:
     description: GPIO signal to enable DDC bus
     maxItems: 1
 
+  hdmi-pwr-supply:
+    description: Power supply for the HDMI +5V Power pin
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: Connection to controller providing HDMI signals
diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
index 75b4efd70ba85..fc11ab5fc4654 100644
--- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
+++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
@@ -21,6 +21,7 @@ properties:
           - fsl,imx28-lcdif
           - fsl,imx6sx-lcdif
           - fsl,imx8mp-lcdif
+          - fsl,imx93-lcdif
       - items:
           - enum:
               - fsl,imx6sl-lcdif
@@ -88,7 +89,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: fsl,imx8mp-lcdif
+            enum:
+              - fsl,imx8mp-lcdif
+              - fsl,imx93-lcdif
     then:
       properties:
         clocks:
@@ -107,6 +110,7 @@ allOf:
               enum:
                 - fsl,imx6sx-lcdif
                 - fsl,imx8mp-lcdif
+                - fsl,imx93-lcdif
     then:
       properties:
         clocks:
@@ -123,6 +127,7 @@ allOf:
               - fsl,imx8mm-lcdif
               - fsl,imx8mn-lcdif
               - fsl,imx8mp-lcdif
+              - fsl,imx93-lcdif
     then:
       required:
         - power-domains
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
index 92741486c24dd..7fd42c8fdc328 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -27,6 +27,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt2712-disp-aal
+              - mediatek,mt6795-disp-aal
           - const: mediatek,mt8173-disp-aal
       - items:
           - enum:
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
index d0ea77fc4b069..f21e440920436 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
@@ -33,6 +33,7 @@ properties:
           - const: mediatek,mt2701-disp-color
       - items:
           - enum:
+              - mediatek,mt6795-disp-color
               - mediatek,mt8183-disp-color
               - mediatek,mt8186-disp-color
               - mediatek,mt8188-disp-color
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index d976380801e3b..803c00f262069 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -17,15 +17,20 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt2701-dpi
-      - mediatek,mt7623-dpi
-      - mediatek,mt8173-dpi
-      - mediatek,mt8183-dpi
-      - mediatek,mt8186-dpi
-      - mediatek,mt8188-dp-intf
-      - mediatek,mt8192-dpi
-      - mediatek,mt8195-dp-intf
+    oneOf:
+      - enum:
+          - mediatek,mt2701-dpi
+          - mediatek,mt7623-dpi
+          - mediatek,mt8173-dpi
+          - mediatek,mt8183-dpi
+          - mediatek,mt8186-dpi
+          - mediatek,mt8188-dp-intf
+          - mediatek,mt8192-dpi
+          - mediatek,mt8195-dp-intf
+      - items:
+          - enum:
+              - mediatek,mt6795-dpi
+          - const: mediatek,mt8183-dpi
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
index 4707b60238b07..12441b937684d 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
@@ -22,13 +22,18 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt2701-dsi
-      - mediatek,mt7623-dsi
-      - mediatek,mt8167-dsi
-      - mediatek,mt8173-dsi
-      - mediatek,mt8183-dsi
-      - mediatek,mt8186-dsi
+    oneOf:
+      - enum:
+          - mediatek,mt2701-dsi
+          - mediatek,mt7623-dsi
+          - mediatek,mt8167-dsi
+          - mediatek,mt8173-dsi
+          - mediatek,mt8183-dsi
+          - mediatek,mt8186-dsi
+      - items:
+          - enum:
+              - mediatek,mt6795-dsi
+          - const: mediatek,mt8173-dsi
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
index 6c2be9d6840b1..c6641acd75d6a 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
@@ -24,6 +24,10 @@ properties:
       - enum:
           - mediatek,mt8173-disp-gamma
           - mediatek,mt8183-disp-gamma
+      - items:
+          - enum:
+              - mediatek,mt6795-disp-gamma
+          - const: mediatek,mt8173-disp-gamma
       - items:
           - enum:
               - mediatek,mt8186-disp-gamma
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
index 2f8e2f4dc3b82..eead5cb8636ed 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -24,6 +24,9 @@ properties:
       - enum:
           - mediatek,mt8173-disp-merge
           - mediatek,mt8195-disp-merge
+      - items:
+          - const: mediatek,mt6795-disp-merge
+          - const: mediatek,mt8173-disp-merge
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
index 29f9fa8f82195..831c653caffd7 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
@@ -24,6 +24,9 @@ properties:
       - enum:
           - mediatek,mt2712-disp-od
           - mediatek,mt8173-disp-od
+      - items:
+          - const: mediatek,mt6795-disp-od
+          - const: mediatek,mt8173-disp-od
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
index 92e320d54ba2a..3e1069b00b56e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
@@ -31,6 +31,10 @@ properties:
               - mediatek,mt7623-disp-ovl
               - mediatek,mt2712-disp-ovl
           - const: mediatek,mt2701-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt6795-disp-ovl
+          - const: mediatek,mt8173-disp-ovl
       - items:
           - enum:
               - mediatek,mt8188-disp-ovl
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
index 42059efad45de..39dbb5c8bcf80 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
@@ -37,6 +37,10 @@ properties:
               - mediatek,mt7623-disp-rdma
               - mediatek,mt2712-disp-rdma
           - const: mediatek,mt2701-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt6795-disp-rdma
+          - const: mediatek,mt8173-disp-rdma
       - items:
           - enum:
               - mediatek,mt8186-disp-rdma
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
index 21a4e96ecd936..a8a5c9608598f 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
@@ -23,6 +23,9 @@ properties:
     oneOf:
       - enum:
           - mediatek,mt8173-disp-split
+      - items:
+          - const: mediatek,mt6795-disp-split
+          - const: mediatek,mt8173-disp-split
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
index 62fad23a26f5a..39e3e2d4a0db8 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
@@ -24,6 +24,9 @@ properties:
     oneOf:
       - enum:
           - mediatek,mt8173-disp-ufoe
+      - items:
+          - const: mediatek,mt6795-disp-ufoe
+          - const: mediatek,mt8173-disp-ufoe
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
index 991183165d29f..a3a2b71a45230 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
@@ -23,6 +23,9 @@ properties:
     oneOf:
       - enum:
           - mediatek,mt8173-disp-wdma
+      - items:
+          - const: mediatek,mt6795-disp-wdma
+          - const: mediatek,mt8173-disp-wdma
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index f0c2237d5f82e..7a7cf3fb3e6da 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -29,6 +29,7 @@ properties:
       - items:
           - enum:
               - qcom,sm8450-dp
+              - qcom,sm8550-dp
           - const: qcom,sm8350-dp
 
   reg:
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 130e16d025bcf..01848bdd58737 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -15,6 +15,7 @@ properties:
       - items:
           - enum:
               - qcom,apq8064-dsi-ctrl
+              - qcom,msm8226-dsi-ctrl
               - qcom,msm8916-dsi-ctrl
               - qcom,msm8953-dsi-ctrl
               - qcom,msm8974-dsi-ctrl
@@ -26,6 +27,8 @@ properties:
               - qcom,sdm660-dsi-ctrl
               - qcom,sdm845-dsi-ctrl
               - qcom,sm6115-dsi-ctrl
+              - qcom,sm6350-dsi-ctrl
+              - qcom,sm6375-dsi-ctrl
               - qcom,sm8150-dsi-ctrl
               - qcom,sm8250-dsi-ctrl
               - qcom,sm8350-dsi-ctrl
@@ -256,6 +259,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,msm8226-dsi-ctrl
               - qcom,msm8974-dsi-ctrl
     then:
       properties:
@@ -297,6 +301,7 @@ allOf:
           contains:
             enum:
               - qcom,msm8998-dsi-ctrl
+              - qcom,sm6350-dsi-ctrl
     then:
       properties:
         clocks:
@@ -364,6 +369,7 @@ allOf:
             enum:
               - qcom,sdm845-dsi-ctrl
               - qcom,sm6115-dsi-ctrl
+              - qcom,sm6375-dsi-ctrl
     then:
       properties:
         clocks:
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index cf4a338c46610..62fb3e484eb29 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -15,10 +15,11 @@ allOf:
 properties:
   compatible:
     enum:
+      - qcom,dsi-phy-28nm-8226
+      - qcom,dsi-phy-28nm-8960
       - qcom,dsi-phy-28nm-hpm
       - qcom,dsi-phy-28nm-hpm-fam-b
       - qcom,dsi-phy-28nm-lp
-      - qcom,dsi-phy-28nm-8960
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
index 029d72822d8b6..d65926b4f0547 100644
--- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -19,16 +19,18 @@ description: |
 
 properties:
   compatible:
-    items:
-      - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$'
-      - const: qcom,adreno-gmu
+    oneOf:
+      - items:
+          - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$'
+          - const: qcom,adreno-gmu
+      - const: qcom,adreno-gmu-wrapper
 
   reg:
-    minItems: 3
+    minItems: 1
     maxItems: 4
 
   reg-names:
-    minItems: 3
+    minItems: 1
     maxItems: 4
 
   clocks:
@@ -44,7 +46,6 @@ properties:
       - description: GMU HFI interrupt
       - description: GMU interrupt
 
-
   interrupt-names:
     items:
       - const: hfi
@@ -72,14 +73,8 @@ required:
   - compatible
   - reg
   - reg-names
-  - clocks
-  - clock-names
-  - interrupts
-  - interrupt-names
   - power-domains
   - power-domain-names
-  - iommus
-  - operating-points-v2
 
 additionalProperties: false
 
@@ -122,6 +117,7 @@ allOf:
           contains:
             enum:
               - qcom,adreno-gmu-635.0
+              - qcom,adreno-gmu-660.1
     then:
       properties:
         reg:
@@ -217,6 +213,28 @@ allOf:
             - const: axi
             - const: memnoc
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,adreno-gmu-wrapper
+    then:
+      properties:
+        reg:
+          items:
+            - description: GMU wrapper register space
+        reg-names:
+          items:
+            - const: gmu
+    else:
+      required:
+        - clocks
+        - clock-names
+        - interrupts
+        - interrupt-names
+        - iommus
+        - operating-points-v2
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
@@ -225,7 +243,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     gmu: gmu@506a000 {
-        compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+        compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
 
         reg = <0x506a000 0x30000>,
               <0xb280000 0x10000>,
@@ -249,3 +267,12 @@ examples:
         iommus = <&adreno_smmu 5>;
         operating-points-v2 = <&gmu_opp_table>;
     };
+
+    gmu_wrapper: gmu@596a000 {
+        compatible = "qcom,adreno-gmu-wrapper";
+        reg = <0x0596a000 0x30000>;
+        reg-names = "gmu";
+        power-domains = <&gpucc GPU_CX_GDSC>,
+                        <&gpucc GPU_GX_GDSC>;
+        power-domain-names = "cx", "gx";
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
index 5dabe7b6794b7..58ca8912a8c34 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -36,10 +36,7 @@ properties:
 
   reg-names:
     minItems: 1
-    items:
-      - const: kgsl_3d0_reg_memory
-      - const: cx_mem
-      - const: cx_dbgc
+    maxItems: 3
 
   interrupts:
     maxItems: 1
@@ -157,16 +154,62 @@ allOf:
       required:
         - clocks
         - clock-names
+
   - if:
       properties:
         compatible:
           contains:
-            pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$'
-
-    then: # Since Adreno 6xx series clocks should be defined in GMU
+            enum:
+              - qcom,adreno-610.0
+              - qcom,adreno-619.1
+    then:
       properties:
-        clocks: false
-        clock-names: false
+        clocks:
+          minItems: 6
+          maxItems: 6
+
+        clock-names:
+          items:
+            - const: core
+              description: GPU Core clock
+            - const: iface
+              description: GPU Interface clock
+            - const: mem_iface
+              description: GPU Memory Interface clock
+            - const: alt_mem_iface
+              description: GPU Alternative Memory Interface clock
+            - const: gmu
+              description: CX GMU clock
+            - const: xo
+              description: GPUCC clocksource clock
+
+        reg-names:
+          minItems: 1
+          items:
+            - const: kgsl_3d0_reg_memory
+            - const: cx_dbgc
+
+      required:
+        - clocks
+        - clock-names
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$'
+
+      then: # Starting with A6xx, the clocks are usually defined in the GMU node
+        properties:
+          clocks: false
+          clock-names: false
+
+          reg-names:
+            minItems: 1
+            items:
+              - const: kgsl_3d0_reg_memory
+              - const: cx_mem
+              - const: cx_dbgc
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
index a763cf8da122f..2fe032d0e8f8a 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
@@ -22,6 +22,7 @@ properties:
       - items:
           - enum:
               - qcom,apq8084-mdp5
+              - qcom,msm8226-mdp5
               - qcom,msm8916-mdp5
               - qcom,msm8917-mdp5
               - qcom,msm8953-mdp5
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
index b0100105e428e..db9f07c6142d8 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -125,6 +125,7 @@ patternProperties:
           - qcom,dsi-phy-14nm-660
           - qcom,dsi-phy-14nm-8953
           - qcom,dsi-phy-20nm
+          - qcom,dsi-phy-28nm-8226
           - qcom,dsi-phy-28nm-hpm
           - qcom,dsi-phy-28nm-lp
           - qcom,hdmi-phy-8084
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
index 1fb8321d9ee80..630b11480496f 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
@@ -13,7 +13,10 @@ $ref: /schemas/display/msm/dpu-common.yaml#
 
 properties:
   compatible:
-    const: qcom,sc7180-dpu
+    enum:
+      - qcom,sc7180-dpu
+      - qcom,sm6350-dpu
+      - qcom,sm6375-dpu
 
   reg:
     items:
@@ -26,6 +29,7 @@ properties:
       - const: vbif
 
   clocks:
+    minItems: 6
     items:
       - description: Display hf axi clock
       - description: Display ahb clock
@@ -33,8 +37,10 @@ properties:
       - description: Display lut clock
       - description: Display core clock
       - description: Display vsync clock
+      - description: Display core throttle clock
 
   clock-names:
+    minItems: 6
     items:
       - const: bus
       - const: iface
@@ -42,6 +48,7 @@ properties:
       - const: lut
       - const: core
       - const: vsync
+      - const: throttle
 
 required:
   - compatible
@@ -52,6 +59,20 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: qcom,sm6375-dpu
+
+    then:
+      properties:
+        clocks:
+          minItems: 7
+
+        clock-names:
+          minItems: 7
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
new file mode 100644
index 0000000000000..ed0ad194d4ce9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  SM6350 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6350-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6350-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm6350-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm6350-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x800 0x2>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm6350-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AXI_CLK>,
+              <&dispcc DISP_CC_MDSS_AHB_CLK>,
+              <&dispcc DISP_CC_MDSS_ROT_CLK>,
+              <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+              <&dispcc DISP_CC_MDSS_MDP_CLK>,
+              <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "rot", "lut", "core",
+                    "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                              <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                              <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                              <&dispcc DISP_CC_MDSS_AHB_CLK>;
+            assigned-clock-rates = <300000000>,
+                                   <19200000>,
+                                   <19200000>,
+                                   <19200000>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SM6350_CX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM6350_MX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
new file mode 100644
index 0000000000000..76369a4f7c4d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6375-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6375 Display MDSS
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description:
+  SM6375 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6375-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm6375-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6375-dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+    #include <dt-bindings/clock/qcom,sm6375-dispcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@5e00000 {
+        compatible = "qcom,sm6375-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "ahb", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x820 0x2>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,sm6375-dpu";
+            reg = <0x05e01000 0x8e030>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                     <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
+            clock-names = "bus",
+                          "iface",
+                          "rot",
+                          "lut",
+                          "core",
+                          "vsync",
+                          "throttle";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd SM6375_VDDCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,sm6375-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd SM6375_VDDMX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@5e94400 {
+            compatible = "qcom,sm6375-dsi-phy-7nm";
+            reg = <0x05e94400 0x200>,
+                  <0x05e94600 0x280>,
+                  <0x05e94900 0x264>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
index 4d94dbff30541..79a226e4cc6a2 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -64,7 +64,7 @@ patternProperties:
     type: object
     properties:
       compatible:
-        const: qcom,dsi-phy-5nm-8350
+        const: qcom,sm8350-dsi-phy-5nm
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
index aed55608ebf6d..906ef62709b8a 100644
--- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -32,6 +32,10 @@ properties:
       - innolux,hj110iz-01a
         # STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel
       - starry,2081101qfh032011-53g
+        # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel
+      - starry,himax83102-j02
+        # STARRY ili9882t 10.51" WUXGA TFT LCD panel
+      - starry,ili9882t
 
   reg:
     description: the virtual channel number of a DSI peripheral
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
index 0039561ef04c8..5f7e4c4860944 100644
--- a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
@@ -19,11 +19,16 @@ allOf:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - xiaomi,elish-boe-nt36523
-          - xiaomi,elish-csot-nt36523
-      - const: novatek,nt36523
+    oneOf:
+      - items:
+          - enum:
+              - xiaomi,elish-boe-nt36523
+              - xiaomi,elish-csot-nt36523
+          - const: novatek,nt36523
+      - items:
+          - enum:
+              - lenovo,j606f-boe-nt36523w
+          - const: novatek,nt36523w
 
   reset-gpios:
     maxItems: 1
@@ -34,6 +39,7 @@ properties:
 
   reg: true
   ports: true
+  rotation: true
   backlight: true
 
 required:
diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
index 9b701df5e9d28..2f0238b770eba 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -67,6 +67,7 @@ properties:
     items:
       - enum:
           - sainsmart18
+          - shineworld,lh133k
       - const: panel-mipi-dbi-spi
 
   write-only:
@@ -86,6 +87,8 @@ properties:
       Logic level supply for interface signals (Vddi).
       No need to set if this is the same as power-supply.
 
+  spi-3wire: true
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 01560fe226dd1..1d4936fc51828 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -33,6 +33,8 @@ properties:
       - ampire,am-1280800n3tzqw-t00h
         # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
       - ampire,am-480272h3tmqw-t01h
+        # Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel
+      - ampire,am-800480l1tmqw-t00h
         # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
       - ampire,am800480r3tmqwa1h
         # Ampire AM-800600P5TMQW-TB8H 8.0" SVGA TFT LCD panel
@@ -77,6 +79,8 @@ properties:
       - auo,t215hvn01
         # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
       - avic,tm070ddh03
+        # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
+      - boe,ev121wxm-n10-1850
         # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
       - boe,hv070wsa-100
         # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
@@ -174,6 +178,8 @@ properties:
       - innolux,at043tn24
         # Innolux AT070TN92 7.0" WQVGA TFT LCD panel
       - innolux,at070tn92
+        # Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel
+      - innolux,g070ace-l01
         # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
       - innolux,g070y2-l01
         # Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel
@@ -280,6 +286,8 @@ properties:
       - rocktech,rk101ii01d-ct
         # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
       - rocktech,rk070er9427
+        # Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel
+      - rocktech,rk043fn48h
         # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
       - samsung,atna33xc20
         # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
index 09b5eb7542f8a..150e81090af2d 100644
--- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
+++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
@@ -20,6 +20,8 @@ allOf:
 properties:
   compatible:
     enum:
+      # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
+      - anbernic,rg353v-panel-v2
       # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
       - rocktech,jh057n00900
       # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
new file mode 100644
index 0000000000000..45a236d2cc70a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D7AA0 MIPI-DSI LCD panel controller
+
+maintainers:
+  - Artur Weber <aweber.kernel@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # 1280x800 LSL080AL02 panel
+          - samsung,lsl080al02
+          # 1024x768 LSL080AL03 panel
+          - samsung,lsl080al03
+          # 1024x768 LTL101AT01 panel
+          - samsung,ltl101at01
+      - const: samsung,s6d7aa0
+
+  reg: true
+
+  backlight:
+    description:
+      Backlight to use for the panel. If this property is set on panels
+      that have DSI-based backlight control (LSL080AL03 and LTL101AT01),
+      it overrides the DSI-based backlight.
+
+  reset-gpios:
+    description: Reset GPIO pin, usually GPIO_ACTIVE_LOW.
+
+  power-supply:
+    description:
+      Main power supply for the panel; the exact voltage differs between
+      panels, and is usually somewhere around 3.3-5v.
+
+  vmipi-supply:
+    description: VMIPI supply, usually 1.8v.
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,lsl080al02", "samsung,s6d7aa0";
+            reg = <0>;
+            power-supply = <&display_3v3_supply>;
+            reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
index 1cdc91b3439f3..200fbf1c74a0b 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
@@ -74,7 +74,7 @@ examples:
             vdd3-supply = <&vcclcd_reg>;
             vci-supply = <&vlcd_reg>;
             reset-gpios = <&gpy4 5 0>;
-            power-on-delay= <50>;
+            power-on-delay = <50>;
             reset-delay = <100>;
             init-delay = <100>;
             panel-width-mm = <58>;
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
index 6f43d885c9b30..df61cb5f5c54b 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
@@ -121,11 +121,11 @@ examples:
         #size-cells = <0>;
         vopb_out_edp: endpoint@0 {
           reg = <0>;
-          remote-endpoint=<&edp_in_vopb>;
+          remote-endpoint = <&edp_in_vopb>;
         };
         vopb_out_hdmi: endpoint@1 {
           reg = <1>;
-          remote-endpoint=<&hdmi_in_vopb>;
+          remote-endpoint = <&hdmi_in_vopb>;
         };
       };
     };
diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
index c488308d7be13..53560052aaf00 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
@@ -74,8 +74,6 @@ properties:
                   - const: 2
 
 required:
-  - "#address-cells"
-  - "#size-cells"
   - compatible
   - reg
   - clocks
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
index a42bf33d1e7da..2181855a0920e 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
@@ -73,6 +73,18 @@ properties:
   avdd-dsi-csi-supply:
     description: DSI/CSI power supply. Must supply 1.2 V.
 
+  vip:
+    $ref: /schemas/display/tegra/nvidia,tegra20-vip.yaml
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input from the VIP (parallel input capture) module
+
 patternProperties:
   "^csi@[0-9a-f]+$":
     type: object
@@ -108,6 +120,22 @@ examples:
     #include <dt-bindings/clock/tegra20-car.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        camera@48 {
+            compatible = "aptina,mt9v111";
+            reg = <0x48>;
+            clocks = <&camera_clk>;
+
+            port {
+                mt9v111_out: endpoint {
+                    remote-endpoint = <&vi_vip_in>;
+                };
+            };
+        };
+    };
+
     vi@54080000 {
         compatible = "nvidia,tegra20-vi";
         reg = <0x54080000 0x00040000>;
@@ -115,6 +143,37 @@ examples:
         clocks = <&tegra_car TEGRA20_CLK_VI>;
         resets = <&tegra_car 100>;
         reset-names = "vi";
+
+        vip {
+            compatible = "nvidia,tegra20-vip";
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    vi_vip_in: endpoint {
+                        remote-endpoint = <&mt9v111_out>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    vi_vip_out: endpoint {
+                        remote-endpoint = <&vi_in>;
+                    };
+                };
+            };
+        };
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                vi_in: endpoint {
+                    remote-endpoint = <&vi_vip_out>;
+                };
+            };
+        };
     };
 
   - |
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml
new file mode 100644
index 0000000000000..14294edb8d8cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra VIP (parallel video capture) controller
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-vip
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port receiving the video stream from the sensor
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port sending the video stream to the VI
+
+    required:
+      - port@0
+      - port@1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - ports
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
index 64845347f44de..1e5752b19a49a 100644
--- a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
+++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
@@ -112,14 +112,23 @@ properties:
       - const: stericsson,dma40
 
   reg:
-    items:
-      - description: DMA40 memory base
-      - description: LCPA memory base
+    oneOf:
+      - items:
+          - description: DMA40 memory base
+      - items:
+          - description: DMA40 memory base
+          - description: LCPA memory base, deprecated, use eSRAM pool instead
+        deprecated: true
+
 
   reg-names:
-    items:
-      - const: base
-      - const: lcpa
+    oneOf:
+      - items:
+          - const: base
+      - items:
+          - const: base
+          - const: lcpa
+        deprecated: true
 
   interrupts:
     maxItems: 1
@@ -127,6 +136,15 @@ properties:
   clocks:
     maxItems: 1
 
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A phandle array with inner size 1 (no arg cells).
+      First phandle is the LCPA (Logical Channel Parameter Address) memory.
+      Second phandle is the  LCLA (Logical Channel Link base Address) memory.
+    maxItems: 2
+    items:
+      maxItems: 1
+
   memcpy-channels:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: Array of u32 elements indicating which channels on the DMA
@@ -138,6 +156,7 @@ required:
   - reg
   - interrupts
   - clocks
+  - sram
   - memcpy-channels
 
 additionalProperties: false
@@ -149,8 +168,9 @@ examples:
     #include <dt-bindings/mfd/dbx500-prcmu.h>
     dma-controller@801c0000 {
         compatible = "stericsson,db8500-dma40", "stericsson,dma40";
-        reg = <0x801c0000 0x1000>, <0x40010000 0x800>;
-        reg-names = "base", "lcpa";
+        reg = <0x801c0000 0x1000>;
+        reg-names = "base";
+        sram = <&lcpa>, <&lcla>;
         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
         #dma-cells = <3>;
         memcpy-channels = <56 57 58 59 60>;
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
index beecfe7a1732a..4ca300a42a99c 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
@@ -33,6 +33,7 @@ properties:
     enum:
       - ti,am62a-dmss-bcdma-csirx
       - ti,am64-dmss-bcdma
+      - ti,j721s2-dmss-bcdma-csi
 
   reg:
     minItems: 3
@@ -151,7 +152,12 @@ allOf:
       required:
         - power-domains
 
-    else:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am64-dmss-bcdma
+    then:
       properties:
         reg:
           minItems: 5
@@ -168,6 +174,28 @@ allOf:
         - ti,sci-rm-range-bchan
         - ti,sci-rm-range-tchan
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721s2-dmss-bcdma-csi
+    then:
+      properties:
+        ti,sci-rm-range-bchan: false
+
+        reg:
+          maxItems: 4
+
+        reg-names:
+          items:
+            - const: gcfg
+            - const: rchanrt
+            - const: tchanrt
+            - const: ringrt
+
+      required:
+        - ti,sci-rm-range-tchan
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
index d6cbd95ec26da..2128f4645c98d 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
@@ -41,6 +41,9 @@ properties:
   clock-names:
     const: axi_clk
 
+  power-domains:
+    maxItems: 1
+
 required:
   - "#dma-cells"
   - compatible
@@ -48,12 +51,14 @@ required:
   - interrupts
   - clocks
   - clock-names
+  - power-domains
 
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
 
     dma: dma-controller@fd4c0000 {
       compatible = "xlnx,zynqmp-dpdma";
@@ -63,6 +68,7 @@ examples:
       clocks = <&dpdma_clk>;
       clock-names = "axi_clk";
       #dma-cells = <1>;
+      power-domains = <&zynqmp_firmware PD_DP>;
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
index 1dcb85a02a769..cc930660b7945 100644
--- a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
+++ b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
@@ -42,7 +42,7 @@ properties:
     enum: [ 0, 1 ]
 
   performance-domains:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     description:
       A phandle and performance domain specifier as defined by bindings of the
       performance controller/provider specified by phandle.
diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml
index 11e2a95a7bcb9..0e31bb36ebb11 100644
--- a/Documentation/devicetree/bindings/eeprom/at25.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at25.yaml
@@ -33,6 +33,7 @@ properties:
               - microchip,25lc040
               - st,m95m02
               - st,m95256
+              - st,m95640
               - cypress,fm25
 
           - const: atmel,at25
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
index f4eec4c42fb3e..a41f9b9a196bb 100644
--- a/Documentation/devicetree/bindings/example-schema.yaml
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -52,8 +52,7 @@ properties:
               - vendor,soc4-ip
               - vendor,soc3-ip
               - vendor,soc2-ip
-          - enum:
-              - vendor,soc1-ip
+          - const: vendor,soc1-ip
         # additionalItems being false is implied
         # minItems/maxItems equal to 2 is implied
       - items:
@@ -85,6 +84,9 @@ properties:
       discouraged.
 
   clock-names:
+    # For single-entry lists in clocks, resets etc., the xxx-names often do not
+    # bring any value, especially if they copy the IP block name.  In such case
+    # just skip the xxx-names.
     items:
       - const: bus
 
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
index 6a9c96f0352ac..2c8cf6aab19a2 100644
--- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
+++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
@@ -27,10 +27,14 @@ properties:
 
   interrupt-names:
     minItems: 1
-    items:
-      - const: usb_id
-      - const: usb_vbus
-
+    anyOf:
+      - items:
+          - const: usb_id
+          - const: usb_vbus
+      - items:
+          - const: usb_id
+      - items:
+          - const: usb_vbus
 required:
   - compatible
   - reg
@@ -49,7 +53,7 @@ examples:
             interrupt-controller;
             #interrupt-cells = <4>;
 
-            usb_id: misc@900 {
+            usb_id: usb-detect@900 {
                     compatible = "qcom,pm8941-misc";
                     reg = <0x900>;
                     interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
index efdf59abb2e18..351b202d0e10f 100644
--- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
@@ -23,7 +23,7 @@ properties:
       headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it
       to HPDETR.  If this node is not included or if the value is unknown,
       then headphone detection mode is set to HPDETL.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 1
     maximum: 2
 
@@ -51,7 +51,7 @@ properties:
     description:
       Additional software microphone detection debounce specified in
       milliseconds.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   wlf,micd-pol-gpio:
     description:
@@ -63,7 +63,7 @@ properties:
     description:
       Time allowed for MICBIAS to startup prior to performing microphone
       detection, specified as per the ARIZONA_MICD_TIME_XXX defines.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 12
 
@@ -71,7 +71,7 @@ properties:
     description:
       Delay between successive microphone detection measurements, specified
       as per the ARIZONA_MICD_TIME_XXX defines.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 12
 
@@ -79,7 +79,7 @@ properties:
     description:
       Microphone detection hardware debounces specified as the number of
       measurements to take.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [2, 4]
 
   wlf,micd-timeout-ms:
@@ -97,7 +97,7 @@ properties:
       CTIA / OMTP headsets), the field can be of variable length but
       should always be a multiple of 3 cells long, each three cell group
       represents one polarity configuration.
-    $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
     items:
       items:
         - description:
@@ -119,7 +119,7 @@ properties:
     description:
       Settings for the general purpose switch, set as one of the
       ARIZONA_GPSW_XXX defines.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
 
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 5824c43e98931..b138f3d23df8c 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -34,6 +34,10 @@ properties:
       - description: SCMI compliant firmware with ARM SMC/HVC transport
         items:
           - const: arm,scmi-smc
+      - description: SCMI compliant firmware with ARM SMC/HVC transport
+                     with shmem address(4KB-page, offset) as parameters
+        items:
+          - const: arm,scmi-smc-param
       - description: SCMI compliant firmware with SCMI Virtio transport.
                      The virtio transport only supports a single device.
         items:
@@ -214,7 +218,7 @@ properties:
         patternProperties:
           '^regulator@[0-9a-f]+$':
             type: object
-            $ref: "../regulator/regulator.yaml#"
+            $ref: /schemas/regulator/regulator.yaml#
             unevaluatedProperties: false
 
             properties:
@@ -299,7 +303,9 @@ else:
     properties:
       compatible:
         contains:
-          const: arm,scmi-smc
+          enum:
+            - arm,scmi-smc
+            - arm,scmi-smc-param
   then:
     required:
       - arm,smc-id
diff --git a/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
new file mode 100644
index 0000000000000..684b15ba9ad09
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/brcm,kona-smc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family Secure Monitor bounce buffer
+
+description:
+  A bounce buffer used for non-secure to secure communications.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11351-smc
+          - brcm,bcm21664-smc
+          - brcm,bcm23550-smc
+      - const: brcm,kona-smc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    smc@3404c000 {
+        compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
+        reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
+    };
+...
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index 83381f3a1341f..bdbee58a542b3 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -51,6 +51,7 @@ properties:
           - qcom,scm-sdm845
           - qcom,scm-sdx55
           - qcom,scm-sdx65
+          - qcom,scm-sdx75
           - qcom,scm-sm6115
           - qcom,scm-sm6125
           - qcom,scm-sm6350
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
index f14f7b454f07c..910bebe6cfa80 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx firmware driver
 
 maintainers:
-  - Nava kishore Manne <nava.manne@xilinx.com>
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
 
 description: The zynqmp-firmware node describes the interface to platform
   firmware. ZynqMP has an interface to communicate with secure firmware.
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
index f47b6140a7429..04dcadc2c20e9 100644
--- a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
+++ b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx Zynq FPGA Manager
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
index ac6a207278d59..26f18834caa3a 100644
--- a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
+++ b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx Versal FPGA driver.
 
 maintainers:
-  - Nava kishore Manne <nava.manne@xilinx.com>
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
 
 description: |
   Device Tree Versal FPGA bindings for the Versal SoC, controlled
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
index 00a8d92ff7368..1390ae103b0b2 100644
--- a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx Zynq Ultrascale MPSoC FPGA Manager
 
 maintainers:
-  - Nava kishore Manne <navam@xilinx.com>
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
 
 description: |
   Device Tree Bindings for Zynq Ultrascale MPSoC FPGA Manager.
diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
deleted file mode 100644
index 4d69f79df8590..0000000000000
--- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
+++ /dev/null
@@ -1,86 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Broadcom BCM6345 GPIO controller
-
-maintainers:
-  - Álvaro Fernández Rojas <noltari@gmail.com>
-  - Jonas Gorski <jonas.gorski@gmail.com>
-
-description: |+
-  Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers.
-
-  These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
-  are the only ones which don't need a pinctrl driver.
-
-  BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
-  and/or written, and the direction changed from input to output.
-  BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
-  and/or written, and the direction changed from input to output.
-  BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data
-  and dirout registers, where GPIO state can be read and/or written, and the
-  direction changed from input to output.
-
-properties:
-  compatible:
-    enum:
-      - brcm,bcm6318-gpio
-      - brcm,bcm6328-gpio
-      - brcm,bcm6345-gpio
-      - brcm,bcm6358-gpio
-      - brcm,bcm6362-gpio
-      - brcm,bcm6368-gpio
-      - brcm,bcm63268-gpio
-
-  gpio-controller: true
-
-  "#gpio-cells":
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
-  native-endian: true
-
-  reg:
-    maxItems: 2
-
-  reg-names:
-    items:
-      - const: dirout
-      - const: dat
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - gpio-controller
-  - '#gpio-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    gpio@fffe0406 {
-      compatible = "brcm,bcm6345-gpio";
-      reg-names = "dirout", "dat";
-      reg = <0xfffe0406 2>, <0xfffe040a 2>;
-      native-endian;
-
-      gpio-controller;
-      #gpio-cells = <2>;
-    };
-
-  - |
-    gpio@0 {
-      compatible = "brcm,bcm63268-gpio";
-      reg-names = "dirout", "dat";
-      reg = <0x0 0x8>, <0x8 0x8>;
-
-      gpio-controller;
-      gpio-ranges = <&pinctrl 0 0 52>;
-      #gpio-cells = <2>;
-    };
diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml
new file mode 100644
index 0000000000000..62fcc2bd5d805
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,bcm63xx-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63xx GPIO controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+  Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers.
+
+  These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
+  are the only ones which don't need a pinctrl driver.
+
+  BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
+  and/or written, and the direction changed from input to output.
+  BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data
+  and dirout registers, where GPIO state can be read and/or written, and the
+  direction changed from input to output.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6318-gpio
+      - brcm,bcm6328-gpio
+      - brcm,bcm6358-gpio
+      - brcm,bcm6362-gpio
+      - brcm,bcm6368-gpio
+      - brcm,bcm63268-gpio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  native-endian: true
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: dirout
+      - const: dat
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@0 {
+      compatible = "brcm,bcm63268-gpio";
+      reg-names = "dirout", "dat";
+      reg = <0x0 0x8>, <0x8 0x8>;
+
+      gpio-controller;
+      gpio-ranges = <&pinctrl 0 0 52>;
+      #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
new file mode 100644
index 0000000000000..1cebc4058e272
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-delay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO delay controller
+
+maintainers:
+  - Alexander Stein <linux@ew.tq-group.com>
+
+description: |
+  This binding describes an electrical setup where setting an GPIO output
+  is delayed by some external setup, e.g. RC circuit.
+
+  +----------+                    +-----------+
+  |          |             VCC_B  |           |
+  |          |              |     |           |
+  |          | VCC_A        _     |           |
+  |  GPIO    |             | | R  |  Consumer |
+  |controller|        ___  |_|    |           |
+  |          |       |   |  |     |           |
+  |      [IOx|-------|   |--+-----|-----+     |
+  |          |       |___|  |     |   input   |
+  |          |              |     |           |
+  +----------+             --- C  +-----------+
+                           ---
+                            |
+                            -
+                           GND
+
+  If the input on the consumer is controlled by an open-drain signal
+  attached to an RC circuit the ramp-up delay is not under control
+  of the GPIO controller.
+
+properties:
+  compatible:
+    const: gpio-delay
+
+  "#gpio-cells":
+    description: |
+      Specifies the pin, ramp-up and ramp-down delays. The
+      delays are specified in microseconds.
+    const: 3
+
+  gpios:
+    description: Array of GPIOs which output signal change is delayed
+    minItems: 1
+    maxItems: 32
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    enable_delay: enable-delay {
+        compatible = "gpio-delay";
+        #gpio-cells = <3>;
+        gpio-controller;
+        gpios = <&gpio0 3 GPIO_ACTIVE_LOW>,
+                <&gpio3 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    consumer {
+        enable-gpios = <&enable_delay 0 130000 30000>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml
new file mode 100644
index 0000000000000..daadfb4926c31
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-ep9301.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EP93xx GPIO controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9301-gpio
+      - items:
+          - enum:
+              - cirrus,ep9302-gpio
+              - cirrus,ep9307-gpio
+              - cirrus,ep9312-gpio
+              - cirrus,ep9315-gpio
+          - const: cirrus,ep9301-gpio
+
+  reg:
+    minItems: 2
+    items:
+      - description: data register
+      - description: direction register
+      - description: interrupt registers base
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: data
+      - const: dir
+      - const: intr
+
+  gpio-controller: true
+
+  gpio-ranges: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    oneOf:
+      - maxItems: 1
+      - description: port F has dedicated irq line for each gpio line
+        maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@80840000 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840000 0x04>,
+            <0x80840010 0x04>,
+            <0x80840090 0x1c>;
+      reg-names = "data", "dir", "intr";
+      gpio-controller;
+      #gpio-cells = <2>;
+        interrupt-controller;
+        interrupt-parent = <&vic1>;
+        interrupts = <27>;
+    };
+
+    gpio@80840004 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840004 0x04>,
+            <0x80840014 0x04>,
+            <0x808400ac 0x1c>;
+      reg-names = "data", "dir", "intr";
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      interrupt-parent = <&vic1>;
+      interrupts = <27>;
+    };
+
+    gpio@80840008 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840008 0x04>,
+            <0x80840018 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@8084000c {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x8084000c 0x04>,
+            <0x8084001c 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@80840020 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840020 0x04>,
+            <0x80840024 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@80840030 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840030 0x04>,
+            <0x80840034 0x04>,
+            <0x8084004c 0x1c>;
+      reg-names = "data", "dir", "intr";
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      interrupts-extended = <&vic0 19>, <&vic0 20>,
+                            <&vic0 21>, <&vic0 22>,
+                            <&vic1 15>, <&vic1 16>,
+                            <&vic1 17>, <&vic1 18>;
+    };
+
+    gpio@80840038 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840038 0x04>,
+            <0x8084003c 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@80840040 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840040 0x04>,
+            <0x80840044 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
new file mode 100644
index 0000000000000..b394e058256e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic MMIO GPIO
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+
+description:
+  Some simple GPIO controllers may consist of a single data register or a pair
+  of set/clear-bit registers. Such controllers are common for glue logic in
+  FPGAs or ASICs. Commonly, these controllers are accessed over memory-mapped
+  NAND-style parallel busses.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6345-gpio
+      - ni,169445-nand-gpio
+      - wd,mbl-gpio # Western Digital MyBook Live memory-mapped GPIO controller
+
+  big-endian: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  little-endian: true
+
+  reg:
+    minItems: 1
+    description:
+      A list of registers in the controller. The width of each register is
+      determined by its size. All registers must have the same width. The number
+      of GPIOs is set by the width, with bit 0 corresponding to GPIO 0.
+    items:
+      - description:
+          Register to READ the value of the GPIO lines. If GPIO line is high,
+          the bit will be set. If the GPIO line is low, the bit will be cleared.
+          This register may also be used to drive GPIOs if the SET register is
+          omitted.
+      - description:
+          Register to SET the value of the GPIO lines. Setting a bit in this
+          register will drive the GPIO line high.
+      - description:
+          Register to CLEAR the value of the GPIO lines. Setting a bit in this
+          register will drive the GPIO line low. If this register is omitted,
+          the SET register will be used to clear the GPIO lines as well, by
+          actively writing the line with 0.
+      - description:
+          Register to set the line as OUTPUT. Setting a bit in this register
+          will turn that line into an output line. Conversely, clearing a bit
+          will turn that line into an input.
+      - description:
+          Register to set this line as INPUT. Setting a bit in this register
+          will turn that line into an input line. Conversely, clearing a bit
+          will turn that line into an output.
+
+  reg-names:
+    minItems: 1
+    maxItems: 5
+    items:
+      enum:
+        - dat
+        - set
+        - clr
+        - dirout
+        - dirin
+
+  native-endian: true
+
+  no-output:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If this property is present, the controller cannot drive the GPIO lines.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#gpio-cells'
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@1f300010 {
+      compatible = "ni,169445-nand-gpio";
+      reg = <0x1f300010 0x4>;
+      reg-names = "dat";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@e0100000 {
+      compatible = "wd,mbl-gpio";
+      reg-names = "dat";
+      reg = <0xe0100000 0x1>;
+      #gpio-cells = <2>;
+      gpio-controller;
+      no-output;
+    };
+
+    gpio@fffe0406 {
+      compatible = "brcm,bcm6345-gpio";
+      reg-names = "dirout", "dat";
+      reg = <0xfffe0406 2>, <0xfffe040a 2>;
+      native-endian;
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
index 5b0134304e51c..452f8972a9659 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
@@ -24,6 +24,10 @@ properties:
   '#gpio-cells':
     const: 2
 
+  gpio-line-names:
+    minItems: 4
+    maxItems: 8
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
deleted file mode 100644
index b33f8f02c0d72..0000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-STMPE gpio
-----------
-
-Required properties:
- - compatible: "st,stmpe-gpio"
-
-Optional properties:
- - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
-   due to different usage (e.g. touch, keypad)
-
-Node should be child node of stmpe node to which it belongs.
-
-Example:
-	stmpe_gpio {
-		compatible = "st,stmpe-gpio";
-		st,norequest-mask = <0x20>;	//gpio 5 can't be used
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
index d2c39dba56add..7c2d152e86170 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
@@ -61,6 +61,13 @@ properties:
   gpio-ranges:
     maxItems: 1
 
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    required:
+      - gpio-hog
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
index 572e1718f5015..5e2496379a3c8 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx Zynq GPIO controller
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt b/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt
deleted file mode 100644
index ca2f8c745a279..0000000000000
--- a/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Bindings for the National Instruments 169445 GPIO NAND controller
-
-The 169445 GPIO NAND controller has two memory mapped GPIO registers, one
-for input (the ready signal) and one for output (control signals).  It is
-intended to be used with the GPIO NAND driver.
-
-Required properties:
-	- compatible: should be "ni,169445-nand-gpio"
-	- reg-names: must contain
-		"dat" - data register
-	- reg: address + size pairs describing the GPIO register sets;
-		order must correspond with the order of entries in reg-names
-	- #gpio-cells: must be set to 2. The first cell is the pin number and
-			the second cell is used to specify the gpio polarity:
-			0 = active high
-			1 = active low
-	- gpio-controller: Marks the device node as a gpio controller.
-
-Optional properties:
-	- no-output: disables driving output on the pins
-
-Examples:
-	gpio1: nand-gpio-out@1f300010 {
-		compatible = "ni,169445-nand-gpio";
-		reg = <0x1f300010 0x4>;
-		reg-names = "dat";
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpio2: nand-gpio-in@1f300014 {
-		compatible = "ni,169445-nand-gpio";
-		reg = <0x1f300014 0x4>;
-		reg-names = "dat";
-		gpio-controller;
-		#gpio-cells = <2>;
-		no-output;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
new file mode 100644
index 0000000000000..22c0cae734251
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,stmpe-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics Port Expander (STMPE) GPIO Block
+
+description:
+  STMicroelectronics Port Expander (STMPE) is a series of slow
+  bus controllers for various expanded peripherals such as GPIO, keypad,
+  touchscreen, ADC, PWM or rotator. It can contain one or several different
+  peripherals connected to SPI or I2C. These bindings pertain to the
+  GPIO portions of these expanders.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: st,stmpe-gpio
+
+  "#gpio-cells":
+    const: 2
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+  st,norequest-mask:
+    description:
+      A bitmask of GPIO lines that cannot be requested because for
+      for example not being connected to anything on the system
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    required:
+      - gpio-hog
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - "#interrupt-cells"
+  - gpio-controller
+  - interrupt-controller
diff --git a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt b/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt
deleted file mode 100644
index 038c3a6a1f4d1..0000000000000
--- a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Bindings for the Western Digital's MyBook Live memory-mapped GPIO controllers.
-
-The Western Digital MyBook Live has two memory-mapped GPIO controllers.
-Both GPIO controller only have a single 8-bit data register, where GPIO
-state can be read and/or written.
-
-Required properties:
-	- compatible: should be "wd,mbl-gpio"
-	- reg-names: must contain
-		"dat" - data register
-	- reg: address + size pairs describing the GPIO register sets;
-		order must correspond with the order of entries in reg-names
-	- #gpio-cells: must be set to 2. The first cell is the pin number and
-			the second cell is used to specify the gpio polarity:
-			0 = active high
-			1 = active low
-	- gpio-controller: Marks the device node as a gpio controller.
-
-Optional properties:
-	- no-output: GPIOs are read-only.
-
-Examples:
-	gpio0: gpio0@e0000000 {
-		compatible = "wd,mbl-gpio";
-		reg-names = "dat";
-		reg = <0xe0000000 0x1>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	gpio1: gpio1@e0100000 {
-		compatible = "wd,mbl-gpio";
-		reg-names = "dat";
-		reg = <0xe0100000 0x1>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		no-output;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
index 31906c2539409..1638cfe90f1c2 100644
--- a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
@@ -44,6 +44,7 @@ patternProperties:
             - GPIO0
             - GPIO1
             - GPIO2
+            - GPIO3
 
       function:
         enum:
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
index f333ee2288e76..c1060e5fcef3a 100644
--- a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
+++ b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx AXI GPIO controller
 
 maintainers:
-  - Neeli Srinivas <srinivas.neeli@xilinx.com>
+  - Neeli Srinivas <srinivas.neeli@amd.com>
 
 description:
   The AXI GPIO design provides a general purpose input/output interface
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
index 31c0fc3459035..18e61aff21857 100644
--- a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
+++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
@@ -12,7 +12,7 @@ description:
   PS_MODE). Every pin can be configured as input/output.
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@xilinx.com>
+  - Piyush Mehta <piyush.mehta@amd.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 0400a361875d6..e796a1ff8c824 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -86,7 +86,7 @@ properties:
     const: 2
 
   dynamic-power-coefficient:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       A u32 value that represents the running time dynamic
       power coefficient in units of uW/MHz/V^2. The
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 2a25384ca3ef1..ca02baba5526d 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -92,7 +92,7 @@ properties:
   dma-coherent: true
 
   dynamic-power-coefficient:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       A u32 value that represents the running time dynamic
       power coefficient in units of uW/MHz/V^2. The
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index 318122d95eb5b..0fae1ef013be8 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -33,6 +33,7 @@ properties:
               - rockchip,rk3228-mali
               - samsung,exynos4210-mali
               - stericsson,db8500-mali
+              - xlnx,zynqmp-mali
           - const: arm,mali-400
       - items:
           - enum:
diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
new file mode 100644
index 0000000000000..2dc8b07b4d3b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch
+
+maintainers:
+  - Daniel Matyas <daniel.matyas@analog.com>
+
+description: |
+  Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with
+  I2C Interface
+  https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - const: adi,max31827
+      - items:
+          - enum:
+              - adi,max31828
+              - adi,max31829
+          - const: adi,max31827
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Must have values in the interval (1.6V; 3.6V) in order for the device to
+      function correctly.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@42 {
+            compatible = "adi,max31827";
+            reg = <0x42>;
+            vref-supply = <&reg_vdd>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
index ae4f68d4e6966..bd67cfee6d193 100644
--- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -105,7 +105,7 @@ properties:
       G coefficient for temperature equation.
       Default for series 5 = 60000
       Default for series 6 = 57400
-    multipleOf: 1000
+    multipleOf: 100
     minimum: 1000
     $ref: /schemas/types.yaml#/definitions/uint32
 
@@ -114,7 +114,7 @@ properties:
       H coefficient for temperature equation.
       Default for series 5 = 200000
       Default for series 6 = 249400
-    multipleOf: 1000
+    multipleOf: 100
     minimum: 1000
     $ref: /schemas/types.yaml#/definitions/uint32
 
@@ -131,7 +131,7 @@ properties:
       J coefficient for temperature equation.
       Default for series 5 = -100
       Default for series 6 = 0
-    multipleOf: 1000
+    multipleOf: 100
     maximum: 0
     $ref: /schemas/types.yaml#/definitions/int32
 
diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
index cb24d7b3221c8..ff57c5416ebcb 100644
--- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
+++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Cadence I2C controller
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
index 32c821f97779b..133855f11b4f5 100644
--- a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
+++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Conor Culhane <conor.culhane@silvaco.com>
 
 allOf:
-  - $ref: "i3c.yaml#"
+  - $ref: i3c.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index d521d516088be..16def2985ab4f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -47,6 +47,9 @@ properties:
   avdd-supply:
     description: AVdd voltage supply
 
+  vref-supply:
+    description: VRef voltage supply
+
   adi,rejection-60-Hz-enable:
     description: |
       This bit enables a notch at 60 Hz when the first notch of the sinc
@@ -89,6 +92,7 @@ required:
   - interrupts
   - dvdd-supply
   - avdd-supply
+  - vref-supply
   - spi-cpol
   - spi-cpha
 
@@ -115,6 +119,7 @@ examples:
             interrupt-parent = <&gpio>;
             dvdd-supply = <&dvdd>;
             avdd-supply = <&avdd>;
+            vref-supply = <&vref>;
 
             adi,refin2-pins-enable;
             adi,rejection-60-Hz-enable;
diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
index 7f79a06e76f59..6168b44ea72cf 100644
--- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
@@ -26,6 +26,7 @@ properties:
           - mediatek,mt2712-auxadc
           - mediatek,mt6765-auxadc
           - mediatek,mt7622-auxadc
+          - mediatek,mt7986-auxadc
           - mediatek,mt8173-auxadc
       - items:
           - enum:
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index bd6e0d6f6e0ce..ad7d6fc49de58 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -54,7 +54,7 @@ required:
   - '#io-channel-cells'
 
 patternProperties:
-  "^.*@[0-9a-f]+$":
+  "^channel@[0-9a-f]+$":
     type: object
     additionalProperties: false
     description: |
@@ -101,7 +101,7 @@ patternProperties:
         oneOf:
           - items:
               - const: 1
-              - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+              - enum: [ 1, 3, 4, 6, 20, 8, 10, 16 ]
           - items:
               - const: 10
               - const: 81
@@ -148,7 +148,7 @@ allOf:
 
     then:
       patternProperties:
-        "^.*@[0-9a-f]+$":
+        "^channel@[0-9a-f]+$":
           properties:
             qcom,decimation:
               enum: [ 512, 1024, 2048, 4096 ]
@@ -171,7 +171,7 @@ allOf:
 
     then:
       patternProperties:
-        "^.*@[0-9a-f]+$":
+        "^channel@[0-9a-f]+$":
           properties:
             qcom,decimation:
               enum: [ 256, 512, 1024 ]
@@ -194,7 +194,7 @@ allOf:
 
     then:
       patternProperties:
-        "^.*@[0-9a-f]+$":
+        "^channel@[0-9a-f]+$":
           properties:
             qcom,decimation:
               enum: [ 250, 420, 840 ]
@@ -217,7 +217,7 @@ allOf:
 
     then:
       patternProperties:
-        "^.*@[0-9a-f]+$":
+        "^channel@[0-9a-f]+$":
           properties:
             qcom,decimation:
               enum: [ 85, 340, 1360 ]
@@ -249,7 +249,7 @@ examples:
             #io-channel-cells = <1>;
 
             /* Channel node */
-            adc-chan@39 {
+            channel@39 {
                 reg = <0x39>;
                 qcom,decimation = <512>;
                 qcom,ratiometric;
@@ -258,19 +258,19 @@ examples:
                 qcom,pre-scaling = <1 3>;
             };
 
-            adc-chan@9 {
+            channel@9 {
                 reg = <0x9>;
             };
 
-            adc-chan@a {
+            channel@a {
                 reg = <0xa>;
             };
 
-            adc-chan@e {
+            channel@e {
                 reg = <0xe>;
             };
 
-            adc-chan@f {
+            channel@f {
                 reg = <0xf>;
             };
         };
@@ -292,16 +292,18 @@ examples:
             #io-channel-cells = <1>;
 
             /* Other properties are omitted */
-            xo-therm@44 {
+            channel@44 {
                 reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
                 qcom,ratiometric;
                 qcom,hw-settle-time = <200>;
+                label = "xo_therm";
             };
 
-            conn-therm@47 {
+            channel@47 {
                 reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
                 qcom,ratiometric;
                 qcom,hw-settle-time = <200>;
+                label = "conn_therm";
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
index da50b529c1576..aa24b841393c0 100644
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
@@ -15,6 +15,7 @@ properties:
       - const: rockchip,saradc
       - const: rockchip,rk3066-tsadc
       - const: rockchip,rk3399-saradc
+      - const: rockchip,rk3588-saradc
       - items:
           - enum:
               - rockchip,px30-saradc
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
index 9b072b057f164..a60b1e100ee40 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
@@ -35,7 +35,7 @@ unevaluatedProperties: false
 examples:
   - |
     spi {
-        #address-cells= <1>;
+        #address-cells = <1>;
         #size-cells = <0>;
 
         adc@0 {
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
index 72d2e910f2065..2594fa192f93d 100644
--- a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
@@ -216,7 +216,6 @@ properties:
     description: Whether to enable burnout current for EXT1.
 
   adi,ext1-burnout-current-nanoamp:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Burnout current in nanoamps to be applied to EXT1.
     enum: [0, 50, 500, 1000, 10000]
@@ -233,7 +232,6 @@ properties:
     description: Whether to enable burnout current for EXT2.
 
   adi,ext2-burnout-current-nanoamp:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: Burnout current in nanoamps to be applied to EXT2.
     enum: [0, 50, 500, 1000, 10000]
     default: 0
@@ -249,7 +247,6 @@ properties:
     description: Whether to enable burnout current for VIOUT.
 
   adi,viout-burnout-current-nanoamp:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: Burnout current in nanoamps to be applied to VIOUT.
     enum: [0, 1000, 10000]
     default: 0
diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
index df2589f214e18..dddf97b50549f 100644
--- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
+++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
@@ -13,7 +13,7 @@ description: |
   When an io-channel measures the midpoint of a voltage divider, the
   interesting voltage is often the voltage over the full resistance
   of the divider. This binding describes the voltage divider in such
-  a curcuit.
+  a circuit.
 
     Vin ----.
             |
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index ec64d7877fe5b..1db6952ddca5e 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -30,6 +30,9 @@ properties:
           - invensense,mpu9150
           - invensense,mpu9250
           - invensense,mpu9255
+      - items:
+          - const: invensense,icm20600
+          - const: invensense,icm20602
       - items:
           - const: invensense,icm20608d
           - const: invensense,icm20608
diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
index b39f5217d8ff3..ee8724ad33ab3 100644
--- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -98,6 +98,7 @@ required:
   - reg
 
 allOf:
+  - $ref: /schemas/iio/iio.yaml#
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml
new file mode 100644
index 0000000000000..4f66fd47b0168
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/rohm,bu27008.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BU27008 color sensor
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description:
+  The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
+  and IR) with four configurable channels. Red and green being always
+  available and two out of the rest three (blue, clear, IR) can be
+  selected to be simultaneously measured. Typical application is adjusting
+  LCD backlight of TVs, mobile phones and tablet PCs.
+
+properties:
+  compatible:
+    const: rohm,bu27008
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@38 {
+        compatible = "rohm,bu27008";
+        reg = <0x38>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml b/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml
new file mode 100644
index 0000000000000..12b0c7ed5d727
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ti,opt4001.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments OPT4001 Ambient Light Sensor
+
+maintainers:
+  - Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>
+
+description:
+  Ambient light sensor with an i2c interface.
+  Last part of compatible is for the packaging used.
+  Picostar is a 4 pinned SMT and sot-5x3 is a 8 pinned SOT.
+  https://www.ti.com/lit/gpn/opt4001
+
+properties:
+  compatible:
+    enum:
+      - ti,opt4001-picostar
+      - ti,opt4001-sot-5x3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,opt4001-sot-5x3
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+    else:
+      properties:
+        interrupts: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@44 {
+            compatible = "ti,opt4001-sot-5x3";
+            reg = <0x44>;
+            vdd-supply = <&vdd_reg>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml b/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml
new file mode 100644
index 0000000000000..ab5c09c00ff46
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/renesas,x9250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas X9250 quad potentiometers
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The Renesas X9250 integrates four digitally controlled potentiometers.
+  On each potentiometer, the X9250T has a 100 kOhms total resistance and the
+  X9250U has a 50 kOhms total resistance.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+properties:
+  compatible:
+    enum:
+      - renesas,x9250t
+      - renesas,x9250u
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description:
+      Regulator for the VCC power supply.
+
+  avp-supply:
+    description:
+      Regulator for the analog V+ power supply.
+
+  avn-supply:
+    description:
+      Regulator for the analog V- power supply.
+
+  '#io-channel-cells':
+    const: 1
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  wp-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the write-protect pin.
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - avp-supply
+  - avn-supply
+  - '#io-channel-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        potentiometer@0 {
+            compatible = "renesas,x9250t";
+            reg = <0>;
+            vcc-supply = <&vcc_regulator>;
+            avp-supply = <&avp_regulator>;
+            avn-supply = <&avp_regulator>;
+            wp-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+            spi-max-frequency = <2000000>;
+            #io-channel-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
new file mode 100644
index 0000000000000..c0a923febf13a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/honeywell,mprls0025pa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell mprls0025pa pressure sensor
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  Honeywell pressure sensor of model mprls0025pa.
+
+  This sensor has an I2C and SPI interface. Only the I2C interface is
+  implemented.
+
+  There are many models with different pressure ranges available. The vendor
+  calls them "mpr series". All of them have the identical programming model and
+  differ in the pressure range, unit and transfer function.
+
+  To support different models one need to specify the pressure range as well as
+  the transfer function. Pressure range needs to be converted from its unit to
+  pascal.
+
+  The transfer function defines the ranges of numerical values delivered by the
+  sensor. The minimal range value stands for the minimum pressure and the
+  maximum value also for the maximum pressure with linear relation inside the
+  range.
+
+  Specifications about the devices can be found at:
+    https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
+      products/sensors/pressure-sensors/board-mount-pressure-sensors/
+      micropressure-mpr-series/documents/
+      sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
+
+properties:
+  compatible:
+    const: honeywell,mprls0025pa
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Optional GPIO for resetting the device.
+      If not present the device is not resetted during the probe.
+    maxItems: 1
+
+  honeywell,pmin-pascal:
+    description:
+      Minimum pressure value the sensor can measure in pascal.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  honeywell,pmax-pascal:
+    description:
+      Maximum pressure value the sensor can measure in pascal.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  honeywell,transfer-function:
+    description: |
+      Transfer function which defines the range of valid values delivered by the
+      sensor.
+      1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
+      2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
+      3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+required:
+  - compatible
+  - reg
+  - honeywell,pmin-pascal
+  - honeywell,pmax-pascal
+  - honeywell,transfer-function
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@18 {
+            compatible = "honeywell,mprls0025pa";
+            reg = <0x18>;
+            reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+            honeywell,pmin-pascal = <0>;
+            honeywell,pmax-pascal = <172369>;
+            honeywell,transfer-function = <1>;
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
index 1ff3afca91494..e450821a741da 100644
--- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
+++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
@@ -84,6 +84,7 @@ properties:
           - st,lps35hw
       - description: IMUs
         enum:
+          - st,lsm303d-imu
           - st,lsm9ds0-imu
       - description: Deprecated bindings
         enum:
diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
index d6965a0c1cf30..654d31f65d360 100644
--- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90614.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Melexis MLX90614 contactless IR temperature sensor
+title: Melexis MLX90614/MLX90615 contactless IR temperature sensor
 
 maintainers:
   - Peter Meerwald <pmeerw@pmeerw.net>
@@ -15,7 +15,9 @@ description: |
 
 properties:
   compatible:
-    const: melexis,mlx90614
+    enum:
+      - melexis,mlx90614
+      - melexis,mlx90615
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
new file mode 100644
index 0000000000000..d43002b9bfdc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/ti,tmp006.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TMP006 IR thermopile sensor
+
+maintainers:
+  - Peter Meerwald <pmeerw@pmeerw.net>
+
+description: |
+  TI TMP006 - Infrared Thermopile Sensor in Chip-Scale Package.
+  https://cdn.sparkfun.com/datasheets/Sensors/Temp/tmp006.pdf
+
+properties:
+  compatible:
+    const: ti,tmp006
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        temperature-sensor@40 {
+            compatible = "ti,tmp006";
+            reg = <0x40>;
+            vdd-supply = <&ldo4_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
index 3ec579d635704..c40799355ed75 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
@@ -14,6 +14,9 @@ description: |
   Atmel maXTouch touchscreen or touchpads such as the mXT244
   and similar devices.
 
+allOf:
+  - $ref: input.yaml#
+
 properties:
   compatible:
     const: atmel,maxtouch
@@ -60,6 +63,10 @@ properties:
       or experiment to determine which bit corresponds to which input. Use
       KEY_RESERVED for unused padding values.
 
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+
   atmel,wakeup-method:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: |
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
deleted file mode 100644
index d3db65916a363..0000000000000
--- a/Documentation/devicetree/bindings/input/cypress,cyapa.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Cypress I2C Touchpad
-
-Required properties:
-- compatible: must be "cypress,cyapa".
-- reg: I2C address of the chip.
-- interrupts: interrupt to which the chip is connected (see interrupt
-	binding[0]).
-
-Optional properties:
-- wakeup-source: touchpad can be used as a wakeup source.
-- pinctrl-names: should be "default" (see pinctrl binding [1]).
-- pinctrl-0: a phandle pointing to the pin settings for the device (see
-	pinctrl binding [1]).
-- vcc-supply: a phandle for the regulator supplying 3.3V power.
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Example:
-	&i2c0 {
-		/* ... */
-
-		/* Cypress Gen3 touchpad */
-		touchpad@67 {
-			compatible = "cypress,cyapa";
-			reg = <0x67>;
-			interrupt-parent = <&gpio>;
-			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
-			wakeup-source;
-		};
-
-		/* Cypress Gen5 and later touchpad */
-		touchpad@24 {
-			compatible = "cypress,cyapa";
-			reg = <0x24>;
-			interrupt-parent = <&gpio>;
-			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
-			wakeup-source;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.yaml b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml
new file mode 100644
index 0000000000000..29515151abe98
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress,cyapa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+  compatible:
+    const: cypress,cyapa
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+  vcc-supply:
+    description: 3.3V power
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        trackpad@67 {
+            reg = <0x67>;
+            compatible = "cypress,cyapa";
+            interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpx1>;
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
index ce18d7dadae23..1edad1da1196d 100644
--- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
+++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
@@ -43,6 +43,15 @@ properties:
       itself as long as it allows the main board to make signals compatible
       with what the touchscreen is expecting for its IO rails.
 
+  goodix,no-reset-during-suspend:
+    description:
+      Set this to true to enforce the driver to not assert the reset GPIO
+      during suspend.
+      Due to potential touchscreen hardware flaw, back-powering could happen in
+      suspend if the power supply is on and with active-low reset GPIO asserted.
+      This property is used to avoid the back-powering issue.
+    type: boolean
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
index 037c3ae9f1c33..e34c9e78d38d8 100644
--- a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
+++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -55,7 +55,7 @@ patternProperties:
 
       interrupt-names: true
 
-      linux-keycodes:
+      linux,keycodes:
         maxItems: 1
 
       wakeup-source: true
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
index d32716c604fee..6398534b43c3e 100644
--- a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
@@ -32,6 +32,8 @@ properties:
     minItems: 1
     maxItems: 2
 
+  enable-gpios: true
+
   vcc-supply: true
 
   direction-duty-cycle-ns:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
index 1959ec3947685..4080422a9eb5c 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
@@ -40,6 +40,8 @@ properties:
   linux,keycodes:
     description: EV_ABS specific event code generated by the axis.
 
+  wakeup-source: true
+
 patternProperties:
   "^button@[0-9]+$":
     type: object
diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
index f7a5e31c506ee..fc21fe3e7b37c 100644
--- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
+++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
@@ -51,7 +51,7 @@ properties:
     type: object
 
   fsl,ddrc:
-    $ref: "/schemas/types.yaml#/definitions/phandle"
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Phandle to DDR Controller.
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
deleted file mode 100644
index bde63f8f090e9..0000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Amlogic meson GPIO interrupt controller
-
-Meson SoCs contains an interrupt controller which is able to watch the SoC
-pads and generate an interrupt on edge or level. The controller is essentially
-a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
-or level and polarity. It does not expose all 256 mux inputs because the
-documentation shows that the upper part is not mapped to any pad. The actual
-number of interrupt exposed depends on the SoC.
-
-Required properties:
-
-- compatible : must have "amlogic,meson8-gpio-intc" and either
-    "amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or
-    "amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or
-    "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
-    "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
-    "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
-    "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
-    "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
-    "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
-    "amlogic,meson-s4-gpio-intc" for S4 SoCs (S802X2, S905Y4, S805X2G, S905W2)
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
-   interrupt source. The value must be 2.
-- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These
-   are the hwirqs used on the parent interrupt controller.
-
-Example:
-
-gpio_interrupt: interrupt-controller@9880 {
-	compatible = "amlogic,meson-gxbb-gpio-intc",
-		     "amlogic,meson-gpio-intc";
-	reg = <0x0 0x9880 0x0 0x10>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	meson,channel-interrupts = <64 65 66 67 68 69 70 71>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
new file mode 100644
index 0000000000000..e84e4f33b3588
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/amlogic,meson-gpio-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson GPIO interrupt controller
+
+maintainers:
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+description: |
+  Meson SoCs contains an interrupt controller which is able to watch the SoC
+  pads and generate an interrupt on edge or level. The controller is essentially
+  a 256 pads to 8 or 12 GIC interrupt multiplexer, with a filter block to select
+  edge or level and polarity. It does not expose all 256 mux inputs because the
+  documentation shows that the upper part is not mapped to any pad. The actual
+  number of interrupts exposed depends on the SoC.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-gpio-intc
+      - items:
+          - enum:
+              - amlogic,meson8-gpio-intc
+              - amlogic,meson8b-gpio-intc
+              - amlogic,meson-gxbb-gpio-intc
+              - amlogic,meson-gxl-gpio-intc
+              - amlogic,meson-axg-gpio-intc
+              - amlogic,meson-g12a-gpio-intc
+              - amlogic,meson-sm1-gpio-intc
+              - amlogic,meson-a1-gpio-intc
+              - amlogic,meson-s4-gpio-intc
+          - const: amlogic,meson-gpio-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  amlogic,channel-interrupts:
+    description: Array with the upstream hwirq numbers
+    minItems: 8
+    maxItems: 12
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - amlogic,channel-interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@9880 {
+      compatible = "amlogic,meson-gxbb-gpio-intc",
+                   "amlogic,meson-gpio-intc";
+      reg = <0x9880 0x10>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
new file mode 100644
index 0000000000000..393c128a41d86
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,eiointc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson Extended I/O Interrupt Controller
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+description: |
+  This interrupt controller is found on the Loongson-3 family chips and
+  Loongson-2K series chips and is used to distribute interrupts directly to
+  individual cores without forwarding them through the HT's interrupt line.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k0500-eiointc
+      - loongson,ls2k2000-eiointc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    eiointc: interrupt-controller@1fe11600 {
+      compatible = "loongson,ls2k0500-eiointc";
+      reg = <0x1fe10000 0x10000>;
+
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <3>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml
deleted file mode 100644
index 50003880ee6fd..0000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml
+++ /dev/null
@@ -1,73 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/interrupt-controller/microchip,eic.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Microchip External Interrupt Controller
-
-maintainers:
-  - Claudiu Beznea <claudiu.beznea@microchip.com>
-
-description:
-  This interrupt controller is found in Microchip SoCs (SAMA7G5) and provides
-  support for handling up to 2 external interrupt lines.
-
-properties:
-  compatible:
-    enum:
-      - microchip,sama7g5-eic
-
-  reg:
-    maxItems: 1
-
-  interrupt-controller: true
-
-  '#interrupt-cells':
-    const: 2
-    description:
-      The first cell is the input IRQ number (between 0 and 1), the second cell
-      is the trigger type as defined in interrupt.txt present in this directory.
-
-  interrupts:
-    description: |
-      Contains the GIC SPI IRQs mapped to the external interrupt lines. They
-      should be specified sequentially from output 0 to output 1.
-    minItems: 2
-    maxItems: 2
-
-  clocks:
-    maxItems: 1
-
-  clock-names:
-    const: pclk
-
-required:
-  - compatible
-  - reg
-  - interrupt-controller
-  - '#interrupt-cells'
-  - interrupts
-  - clocks
-  - clock-names
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/at91.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-    eic: interrupt-controller@e1628000 {
-      compatible = "microchip,sama7g5-eic";
-      reg = <0xe1628000 0x100>;
-      interrupt-parent = <&gic>;
-      interrupt-controller;
-      #interrupt-cells = <2>;
-      interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-      clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
-      clock-names = "pclk";
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml
new file mode 100644
index 0000000000000..d56ba65b17d1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,sama7g5-eic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip External Interrupt Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  This interrupt controller is found in Microchip SoCs (SAMA7G5) and provides
+  support for handling up to 2 external interrupt lines.
+
+properties:
+  compatible:
+    enum:
+      - microchip,sama7g5-eic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the input IRQ number (between 0 and 1), the second cell
+      is the trigger type as defined in interrupt.txt present in this directory.
+
+  interrupts:
+    description: |
+      Contains the GIC SPI IRQs mapped to the external interrupt lines. They
+      should be specified sequentially from output 0 to output 1.
+    minItems: 2
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    eic: interrupt-controller@e1628000 {
+      compatible = "microchip,sama7g5-eic";
+      reg = <0xe1628000 0x100>;
+      interrupt-parent = <&gic>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+      clock-names = "pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml
new file mode 100644
index 0000000000000..0fa952a9edfd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ralink,rt2880-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink SoCs Interrupt Controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description:
+  This interrupt controller support a central point for interrupt aggregation
+  for platform related blocks.
+
+properties:
+  compatible:
+    const: ralink,rt2880-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@200 {
+      compatible = "ralink,rt2880-intc";
+      reg = <0x200 0x100>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index f75736a061af7..dc1f28e552660 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -57,14 +57,15 @@ properties:
           - const: andestech,nceplic100
       - items:
           - enum:
+              - canaan,k210-plic
               - sifive,fu540-c000-plic
               - starfive,jh7100-plic
               - starfive,jh7110-plic
-              - canaan,k210-plic
           - const: sifive,plic-1.0.0
       - items:
           - enum:
               - allwinner,sun20i-d1-plic
+              - thead,th1520-plic
           - const: thead,c900-plic
       - items:
           - const: sifive,plic-1.0.0
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index ba677d401e240..3a31a979709b6 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -29,6 +29,7 @@ properties:
               - qcom,msm8996-smmu-v2
               - qcom,msm8998-smmu-v2
               - qcom,sdm630-smmu-v2
+              - qcom,sm6375-smmu-v2
           - const: qcom,smmu-v2
 
       - description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500"
@@ -45,6 +46,7 @@ properties:
               - qcom,sdm845-smmu-500
               - qcom,sdx55-smmu-500
               - qcom,sdx65-smmu-500
+              - qcom,sdx75-smmu-500
               - qcom,sm6115-smmu-500
               - qcom,sm6125-smmu-500
               - qcom,sm6350-smmu-500
@@ -79,7 +81,9 @@ properties:
       - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500"
         items:
           - enum:
+              - qcom,sa8775p-smmu-500
               - qcom,sc7280-smmu-500
+              - qcom,sc8280xp-smmu-500
               - qcom,sm6115-smmu-500
               - qcom,sm6125-smmu-500
               - qcom,sm8150-smmu-500
@@ -267,6 +271,7 @@ allOf:
             enum:
               - qcom,msm8998-smmu-v2
               - qcom,sdm630-smmu-v2
+              - qcom,sm6375-smmu-v2
     then:
       anyOf:
         - properties:
@@ -331,7 +336,10 @@ allOf:
       properties:
         compatible:
           contains:
-            const: qcom,sc7280-smmu-500
+            enum:
+              - qcom,sa8775p-smmu-500
+              - qcom,sc7280-smmu-500
+              - qcom,sc8280xp-smmu-500
     then:
       properties:
         clock-names:
@@ -413,10 +421,8 @@ allOf:
               - nvidia,smmu-500
               - qcom,qcm2290-smmu-500
               - qcom,qdu1000-smmu-500
-              - qcom,sa8775p-smmu-500
               - qcom,sc7180-smmu-500
               - qcom,sc8180x-smmu-500
-              - qcom,sc8280xp-smmu-500
               - qcom,sdm670-smmu-500
               - qcom,sdm845-smmu-500
               - qcom,sdx55-smmu-500
diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
new file mode 100644
index 0000000000000..feb5febaf361a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/awinic,aw200xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AWINIC AW200XX LED
+
+maintainers:
+  - Martin Kurbanov <mmkurbanov@sberdevices.ru>
+
+description: |
+  This controller is present on AW20036/AW20054/AW20072.
+  It is a 3x12/6x9/6x12 matrix LED programmed via
+  an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
+  3 pattern controllers for auto breathing or group dimming control.
+
+  For more product information please see the link below:
+  aw20036 - https://www.awinic.com/en/productDetail/AW20036QNR#tech-docs
+  aw20054 - https://www.awinic.com/en/productDetail/AW20054QNR#tech-docs
+  aw20072 - https://www.awinic.com/en/productDetail/AW20072QNR#tech-docs
+
+properties:
+  compatible:
+    enum:
+      - awinic,aw20036
+      - awinic,aw20054
+      - awinic,aw20072
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  awinic,display-rows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Leds matrix size
+
+patternProperties:
+  "^led@[0-9a-f]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description:
+          LED number
+        maxItems: 1
+
+      led-max-microamp:
+        default: 9780
+        description: |
+          Note that a driver will take the minimum of all LED limits
+          since the chip has a single global setting.
+          The maximum output current of each LED is calculated by the
+          following formula:
+            IMAXled = 160000 * (592 / 600.5) * (1 / display-rows)
+          And the minimum output current formula:
+            IMINled = 3300 * (592 / 600.5) * (1 / display-rows)
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - awinic,display-rows
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: awinic,aw20036
+    then:
+      properties:
+        awinic,display-rows:
+          enum: [1, 2, 3]
+    else:
+      properties:
+        awinic,display-rows:
+          enum: [1, 2, 3, 4, 5, 6, 7]
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@3a {
+            compatible = "awinic,aw20036";
+            reg = <0x3a>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            awinic,display-rows = <3>;
+
+            led@0 {
+                reg = <0x0>;
+                color = <LED_COLOR_ID_RED>;
+                led-max-microamp = <9780>;
+            };
+
+            led@1 {
+                reg = <0x1>;
+                color = <LED_COLOR_ID_GREEN>;
+                led-max-microamp = <9780>;
+            };
+
+            led@2 {
+                reg = <0x2>;
+                color = <LED_COLOR_ID_BLUE>;
+                led-max-microamp = <9780>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
index e1191453c2f0c..c914e12769825 100644
--- a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
@@ -21,6 +21,9 @@ properties:
   compatible:
     const: kinetic,ktz8866
 
+  reg:
+    maxItems: 1
+
   vddpos-supply:
     description: positive boost supply regulator.
 
@@ -33,6 +36,7 @@ properties:
 
   current-num-sinks:
     description: number of the LED current sinks' channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 2, 3, 4, 5, 6]
 
   kinetic,current-ramp-delay-ms:
@@ -53,6 +57,7 @@ properties:
 
 required:
   - compatible
+  - reg
   - vddpos-supply
   - vddneg-supply
   - enable-gpios
@@ -63,14 +68,19 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    backlight {
-        compatible = "kinetic,ktz8866";
-
-        vddpos-supply = <&bl_vddpos_5p5>;
-        vddneg-supply = <&bl_vddneg_5p5>;
-        enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
-        current-num-sinks = <5>;
-        kinetic,current-ramp-delay-ms = <128>;
-        kinetic,led-enable-ramp-delay-ms = <1>;
-        kinetic,enable-lcd-bias;
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@11 {
+            compatible = "kinetic,ktz8866";
+            reg = <0x11>;
+            vddpos-supply = <&bl_vddpos_5p5>;
+            vddneg-supply = <&bl_vddneg_5p5>;
+            enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+            current-num-sinks = <5>;
+            kinetic,current-ramp-delay-ms = <128>;
+            kinetic,led-enable-ramp-delay-ms = <1>;
+            kinetic,enable-lcd-bias;
+        };
     };
diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml
new file mode 100644
index 0000000000000..9416e1bfab92c
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/lp855x-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LP855X backlight controllers
+
+maintainers:
+  - Artur Weber <aweber.kernel@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,lp8550
+      - ti,lp8551
+      - ti,lp8552
+      - ti,lp8553
+      - ti,lp8555
+      - ti,lp8556
+      - ti,lp8557
+
+  reg:
+    maxItems: 1
+
+  dev-ctrl:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      Value of device control register. This is a device-specific value.
+
+  bl-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Backlight device name.
+
+  init-brt:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: Initial value of backlight brightness.
+
+  power-supply:
+    description: Regulator which controls the 3V rail.
+
+  enable-supply:
+    description: Regulator which controls the EN/VDDIO input.
+
+  pwms:
+    maxItems: 1
+    description: |
+      PWM channel to use for controlling the backlight; setting this
+      enables the PWM-based backlight control mode.
+
+  pwm-names: true
+
+  pwm-period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      PWM period value. Deprecated; set the period value in the pwms
+      property instead.
+    deprecated: true
+
+patternProperties:
+  "^rom-[0-9a-f]{2}h$":
+    type: object
+    description: Nodes containing the values of configuration registers.
+    additionalProperties: false
+    properties:
+      rom-addr:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        description: Register address of ROM area to be updated.
+
+      rom-val:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        description: Value to write to the ROM register.
+
+required:
+  - compatible
+  - reg
+  - dev-ctrl
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@2c {
+            compatible = "ti,lp8555";
+            reg = <0x2c>;
+
+            dev-ctrl = /bits/ 8 <0x00>;
+
+            pwms = <&pwm 0 10000>;
+            pwm-names = "lp8555";
+
+            /* 4V OV, 4 output LED0 string enabled */
+            rom-14h {
+              rom-addr = /bits/ 8 <0x14>;
+              rom-val = /bits/ 8 <0xcf>;
+            };
+
+            /* Heavy smoothing, 24ms ramp time step */
+            rom-15h {
+              rom-addr = /bits/ 8 <0x15>;
+              rom-val = /bits/ 8 <0xc7>;
+            };
+
+            /* 4 output LED1 string enabled */
+            rom-19h {
+              rom-addr = /bits/ 8 <0x19>;
+              rom-val = /bits/ 8 <0x0f>;
+            };
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@2c {
+            compatible = "ti,lp8556";
+            reg = <0x2c>;
+
+            bl-name = "lcd-bl";
+            dev-ctrl = /bits/ 8 <0x85>;
+            init-brt = /bits/ 8 <0x10>;
+        };
+      };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@2c {
+            compatible = "ti,lp8557";
+            reg = <0x2c>;
+            enable-supply = <&backlight_vddio>;
+            power-supply = <&backlight_vdd>;
+
+            dev-ctrl = /bits/ 8 <0x41>;
+            init-brt = /bits/ 8 <0x0a>;
+
+            /* 4V OV, 4 output LED string enabled */
+            rom-14h {
+              rom-addr = /bits/ 8 <0x14>;
+              rom-val = /bits/ 8 <0xcf>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
deleted file mode 100644
index 88f56641fc285..0000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-lp855x bindings
-
-Required properties:
-  - compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553",
-                "ti,lp8555", "ti,lp8556", "ti,lp8557"
-  - reg: I2C slave address (u8)
-  - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device.
-
-Optional properties:
-  - bl-name: Backlight device name (string)
-  - init-brt: Initial value of backlight brightness (u8)
-  - pwm-period: PWM period value. Set only PWM input mode used (u32)
-  - rom-addr: Register address of ROM area to be updated (u8)
-  - rom-val: Register value to be updated (u8)
-  - power-supply: Regulator which controls the 3V rail
-  - enable-supply: Regulator which controls the EN/VDDIO input
-
-Example:
-
-	/* LP8555 */
-	backlight@2c {
-		compatible = "ti,lp8555";
-		reg = <0x2c>;
-
-		dev-ctrl = /bits/ 8 <0x00>;
-		pwm-period = <10000>;
-
-		/* 4V OV, 4 output LED0 string enabled */
-		rom_14h {
-			rom-addr = /bits/ 8 <0x14>;
-			rom-val = /bits/ 8 <0xcf>;
-		};
-
-		/* Heavy smoothing, 24ms ramp time step */
-		rom_15h {
-			rom-addr = /bits/ 8 <0x15>;
-			rom-val = /bits/ 8 <0xc7>;
-		};
-
-		/* 4 output LED1 string enabled */
-		rom_19h {
-			rom-addr = /bits/ 8 <0x19>;
-			rom-val = /bits/ 8 <0x0f>;
-		};
-	};
-
-	/* LP8556 */
-	backlight@2c {
-		compatible = "ti,lp8556";
-		reg = <0x2c>;
-
-		bl-name = "lcd-bl";
-		dev-ctrl = /bits/ 8 <0x85>;
-		init-brt = /bits/ 8 <0x10>;
-	};
-
-	/* LP8557 */
-	backlight@2c {
-		compatible = "ti,lp8557";
-		reg = <0x2c>;
-		enable-supply = <&backlight_vddio>;
-		power-supply = <&backlight_vdd>;
-
-		dev-ctrl = /bits/ 8 <0x41>;
-		init-brt = /bits/ 8 <0x0a>;
-
-		/* 4V OV, 4 output LED string enabled */
-		rom_14h {
-			rom-addr = /bits/ 8 <0x14>;
-			rom-val = /bits/ 8 <0xcf>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
index 5ec47a8c6568b..5356902889902 100644
--- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
@@ -68,7 +68,6 @@ dependencies:
 required:
   - compatible
   - pwms
-  - power-supply
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 11aedf1650a12..58b492d002464 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -105,8 +105,6 @@ properties:
           - audio-mute
             # LED indicates bluetooth power state
           - bluetooth-power
-            # LED indicates activity of all CPUs
-          - cpu
             # LED indicates camera flash state
           - flash
             # LED indicated keyboard capslock
diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index 31840e33dcf55..e850a8894758d 100644
--- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -34,7 +34,7 @@ required:
   - color
 
 allOf:
-  - $ref: "common.yaml#"
+  - $ref: common.yaml#
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
index ae607911f1dbd..058be1fedbc88 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -66,6 +66,14 @@ properties:
   '#size-cells':
     const: 0
 
+  ti,charge-pump-mode:
+    description:
+      Set the operating mode of the internal charge pump as defined in
+      <dt-bindings/leds/leds-lp55xx.h>.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 3 # auto
+    maximum: 3
+
 patternProperties:
   '^multi-led@[0-8]$':
     type: object
@@ -152,6 +160,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/leds/leds-lp55xx.h>
 
     i2c {
         #address-cells = <1>;
@@ -164,6 +173,7 @@ examples:
             reg = <0x32>;
             clock-mode = /bits/ 8 <2>;
             pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
+            ti,charge-pump-mode = <LP55XX_CP_BYPASS>;
 
             led@0 {
                 reg = <0>;
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
index 73353692efa1c..052dccb8f2ce0 100644
--- a/Documentation/devicetree/bindings/leds/leds-mt6323.txt
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -12,7 +12,10 @@ For MediaTek PMIC wrapper bindings see:
 Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
 
 Required properties:
-- compatible : Must be "mediatek,mt6323-led"
+- compatible : Must be one of
+  - "mediatek,mt6323-led"
+  - "mediatek,mt6331-led"
+  - "mediatek,mt6332-led"
 - address-cells : Must be 1
 - size-cells : Must be 0
 
diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
index 6295c91f43e84..e6f1999cb22f5 100644
--- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -16,18 +16,24 @@ description: >
 
 properties:
   compatible:
-    enum:
-      - qcom,pm660l-lpg
-      - qcom,pm8150b-lpg
-      - qcom,pm8150l-lpg
-      - qcom,pm8350c-pwm
-      - qcom,pm8916-pwm
-      - qcom,pm8941-lpg
-      - qcom,pm8994-lpg
-      - qcom,pmc8180c-lpg
-      - qcom,pmi8994-lpg
-      - qcom,pmi8998-lpg
-      - qcom,pmk8550-pwm
+    oneOf:
+      - enum:
+          - qcom,pm660l-lpg
+          - qcom,pm8150b-lpg
+          - qcom,pm8150l-lpg
+          - qcom,pm8350c-pwm
+          - qcom,pm8916-pwm
+          - qcom,pm8941-lpg
+          - qcom,pm8994-lpg
+          - qcom,pmc8180c-lpg
+          - qcom,pmi632-lpg
+          - qcom,pmi8994-lpg
+          - qcom,pmi8998-lpg
+          - qcom,pmk8550-pwm
+      - items:
+          - enum:
+              - qcom,pm8550-pwm
+          - const: qcom,pm8350c-pwm
 
   "#pwm-cells":
     const: 2
diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
index 4d2ffe5fcfc79..37d2a93780abb 100644
--- a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
@@ -20,6 +20,7 @@ properties:
   compatible:
     enum:
       - ocs,ocp8110
+      - richtek,rt5033-led
       - sgmicro,sgm3140
 
   enable-gpios:
diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
index ffacf703d9f97..a8736fd5a5390 100644
--- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
+++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
@@ -26,6 +26,8 @@ properties:
           - qcom,pm8150c-flash-led
           - qcom,pm8150l-flash-led
           - qcom,pm8350c-flash-led
+          - qcom,pm8550-flash-led
+          - qcom,pmi8998-flash-led
       - const: qcom,spmi-flash-led
 
   reg:
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
index 64b0be9cf70bc..58f0d94c6d716 100644
--- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
@@ -32,7 +32,7 @@ patternProperties:
     properties:
       rohm,led-compatible:
         description: LED identification string
-        $ref: "/schemas/types.yaml#/definitions/string"
+        $ref: /schemas/types.yaml#/definitions/string
         enum:
           - bd71828-ambled
           - bd71828-grnled
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
deleted file mode 100644
index b48d7d30012cb..0000000000000
--- a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Broadcom BCM2835 VideoCore mailbox IPC
-
-Required properties:
-
-- compatible:	Should be "brcm,bcm2835-mbox"
-- reg:		Specifies base physical address and size of the registers
-- interrupts:	The interrupt number
-		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
-- #mbox-cells:	Specifies the number of cells needed to encode a mailbox
-		  channel. The value shall be 0, since there is only one
-		  mailbox channel implemented by the device.
-
-Example:
-
-mailbox: mailbox@7e00b880 {
-	compatible = "brcm,bcm2835-mbox";
-	reg = <0x7e00b880 0x40>;
-	interrupts = <0 1>;
-	#mbox-cells = <0>;
-};
-
-firmware: firmware {
-	compatible = "raspberrypi,firmware";
-	mboxes = <&mailbox>;
-	#power-domain-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml
new file mode 100644
index 0000000000000..9588817f45115
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/brcm,bcm2835-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 VideoCore mailbox IPC
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+properties:
+  compatible:
+    const: brcm,bcm2835-mbox
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox@7e00b880 {
+      compatible = "brcm,bcm2835-mbox";
+      reg = <0x7e00b880 0x40>;
+      interrupts = <0 1>;
+      #mbox-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
index a3e87516d637d..2d14fc9489998 100644
--- a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
+++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
@@ -66,6 +66,7 @@ properties:
     oneOf:
       - const: nvidia,tegra186-hsp
       - const: nvidia,tegra194-hsp
+      - const: nvidia,tegra264-hsp
       - items:
           - const: nvidia,tegra234-hsp
           - const: nvidia,tegra194-hsp
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
index 32d7bbc98cace..d2e25ff6db7f6 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -18,6 +18,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - qcom,ipq5018-apcs-apps-global
               - qcom,ipq5332-apcs-apps-global
               - qcom,ipq8074-apcs-apps-global
               - qcom,ipq9574-apcs-apps-global
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
index 374ffe64016f3..aeaddbf574b0b 100644
--- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
@@ -33,7 +33,7 @@ description: |
               +------------------------------------------+
 
 maintainers:
-  - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
index 444f24838d3d8..6c72e77b927c0 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
@@ -65,9 +65,14 @@ properties:
 
             properties:
               data-lanes: true
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
 
             required:
               - data-lanes
+              - bus-type
 
     required:
       - port@4
@@ -82,6 +87,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
     i2c@e6508000 {
             #address-cells = <1>;
@@ -101,6 +107,7 @@ examples:
                             port@4 {
                                     reg = <4>;
                                     max96712_out0: endpoint {
+                                            bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
                                             clock-lanes = <0>;
                                             data-lanes = <1 2 3 4>;
                                             remote-endpoint = <&csi40_in>;
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
index eb1499912c584..9cc0a968a4018 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
@@ -155,7 +155,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 
-    camss: camss@1b00000 {
+    camss: camss@1b0ac00 {
       compatible = "qcom,msm8916-camss";
 
       clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
index 8a10aa1cafc50..5cb0e337ea6e4 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
@@ -221,7 +221,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-msm8996.h>
     #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
 
-    camss: camss@a00000 {
+    camss: camss@a34000 {
       compatible = "qcom,msm8996-camss";
 
       clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
index 0a109e126064d..584106e275f67 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
@@ -227,7 +227,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sdm660.h>
     #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
 
-    camss: camss@ca00000 {
+    camss: camss@ca00020 {
       compatible = "qcom,sdm660-camss";
 
       clocks = <&mmcc CAMSS_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
index 1530ad0d80bdc..ec4380a0a03f7 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
@@ -219,7 +219,7 @@ examples:
       #address-cells = <2>;
       #size-cells = <2>;
 
-      camss: camss@a00000 {
+      camss: camss@acb3000 {
         compatible = "qcom,sdm845-camss";
 
         clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
index 7dde7967c8869..1e72b8808d248 100644
--- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
@@ -137,7 +137,7 @@ examples:
 
                 cru_parallel_in: endpoint@0 {
                     reg = <0>;
-                    remote-endpoint= <&ov5642>;
+                    remote-endpoint = <&ov5642>;
                     hsync-active = <1>;
                     vsync-active = <1>;
                 };
@@ -150,7 +150,7 @@ examples:
 
                 cru_csi_in: endpoint@0 {
                     reg = <0>;
-                    remote-endpoint= <&csi_cru_in>;
+                    remote-endpoint = <&csi_cru_in>;
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
index 91e8f368fb520..324703bfb1bde 100644
--- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -303,11 +303,11 @@ examples:
 
                             vin0csi20: endpoint@0 {
                                     reg = <0>;
-                                    remote-endpoint= <&csi20vin0>;
+                                    remote-endpoint = <&csi20vin0>;
                             };
                             vin0csi40: endpoint@2 {
                                     reg = <2>;
-                                    remote-endpoint= <&csi40vin0>;
+                                    remote-endpoint = <&csi40vin0>;
                             };
                     };
             };
diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.yaml b/Documentation/devicetree/bindings/media/rockchip-rga.yaml
index dd645ddccb075..ea23422224086 100644
--- a/Documentation/devicetree/bindings/media/rockchip-rga.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-rga.yaml
@@ -21,7 +21,9 @@ properties:
       - const: rockchip,rk3288-rga
       - const: rockchip,rk3399-rga
       - items:
-          - const: rockchip,rk3228-rga
+          - enum:
+              - rockchip,rk3228-rga
+              - rockchip,rk3568-rga
           - const: rockchip,rk3288-rga
 
   reg:
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
index ee622a8ee1ccb..772ec3283bc6c 100644
--- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
@@ -24,6 +24,7 @@ properties:
           - rockchip,rk3399-vpu
           - rockchip,px30-vpu
           - rockchip,rk3568-vpu
+          - rockchip,rk3588-av1-vpu
       - items:
           - const: rockchip,rk3188-vpu
           - const: rockchip,rk3066-vpu
diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
index 8eb90c043d5d8..e69de29bb2d1d 100644
--- a/Documentation/devicetree/bindings/media/s5p-mfc.txt
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -1,78 +0,0 @@
-* Samsung Multi Format Codec (MFC)
-
-Multi Format Codec (MFC) is the IP present in Samsung SoCs which
-supports high resolution decoding and encoding functionalities.
-The MFC device driver is a v4l2 driver which can encode/decode
-video raw/elementary streams and has support for all popular
-video codecs.
-
-Required properties:
-  - compatible : value should be either one among the following
-	(a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs
-	(b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs
-	(c) "samsung,exynos3250-mfc", "samsung,mfc-v7" for MFC v7
-	     present in Exynos3250 SoC
-	(d) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
-	(e) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC
-	(f) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC
-	(g) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC
-
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-
-  - interrupts : MFC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to mfc clock.
-  - clock-names : from common clock binding: must contain "mfc",
-		  corresponding to entry in the clocks property.
-
-Optional properties:
-  - power-domains : power-domain property defined with a phandle
-			   to respective power domain.
-  - memory-region : from reserved memory binding: phandles to two reserved
-	memory regions, first is for "left" mfc memory bus interfaces,
-	second if for the "right" mfc memory bus, used when no SYSMMU
-	support is available; used only by MFC v5 present in Exynos4 SoCs
-
-Obsolete properties:
-  - samsung,mfc-r, samsung,mfc-l : support removed, please use memory-region
-	property instead
-
-
-Example:
-SoC specific DT entry:
-
-mfc: codec@13400000 {
-	compatible = "samsung,mfc-v5";
-	reg = <0x13400000 0x10000>;
-	interrupts = <0 94 0>;
-	power-domains = <&pd_mfc>;
-	clocks = <&clock 273>;
-	clock-names = "mfc";
-};
-
-Reserved memory specific DT entry for given board (see reserved memory binding
-for more information):
-
-reserved-memory {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	mfc_left: region@51000000 {
-		compatible = "shared-dma-pool";
-		no-map;
-		reg = <0x51000000 0x800000>;
-	};
-
-	mfc_right: region@43000000 {
-		compatible = "shared-dma-pool";
-		no-map;
-		reg = <0x43000000 0x800000>;
-	};
-};
-
-Board specific DT entry:
-
-codec@13400000 {
-	memory-region = <&mfc_left>, <&mfc_right>;
-};
diff --git a/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml
new file mode 100644
index 0000000000000..084b44582a434
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,s5p-mfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Multi Format Codec (MFC)
+
+maintainers:
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Aakarsh Jain <aakarsh.jain@samsung.com>
+
+description:
+  Multi Format Codec (MFC) is the IP present in Samsung SoCs which
+  supports high resolution decoding and encoding functionalities.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5433-mfc        # Exynos5433
+          - samsung,mfc-v5                # Exynos4
+          - samsung,mfc-v6                # Exynos5
+          - samsung,mfc-v7                # Exynos5420
+          - samsung,mfc-v8                # Exynos5800
+          - samsung,mfc-v10               # Exynos7880
+      - items:
+          - enum:
+              - samsung,exynos3250-mfc    # Exynos3250
+          - const: samsung,mfc-v7         # Fall back for Exynos3250
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  iommu-names:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  memory-region:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-mfc
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: mfc
+            - const: sclk_mfc
+        iommus:
+          maxItems: 1
+        iommus-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-mfc
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+        iommus:
+          maxItems: 2
+        iommus-names:
+          items:
+            - const: left
+            - const: right
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,mfc-v5
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: mfc
+            - const: sclk_mfc
+        iommus:
+          maxItems: 2
+        iommus-names:
+          items:
+            - const: left
+            - const: right
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,mfc-v6
+              - samsung,mfc-v8
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: mfc
+        iommus:
+          maxItems: 2
+        iommus-names:
+          items:
+            - const: left
+            - const: right
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,mfc-v7
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 2
+        iommus:
+          minItems: 1
+          maxItems: 2
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/clock/exynos-audss-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    codec@13400000 {
+        compatible = "samsung,mfc-v5";
+        reg = <0x13400000 0x10000>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_mfc>;
+        clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
+        clock-names = "mfc", "sclk_mfc";
+        iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+        iommu-names = "left", "right";
+    };
diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
index 7d77823dbb7a1..43daf837fc9f0 100644
--- a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
+++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx MIPI CSI-2 Receiver Subsystem
 
 maintainers:
-  - Vishal Sagar <vishal.sagar@xilinx.com>
+  - Vishal Sagar <vishal.sagar@amd.com>
 
 description: |
   The Xilinx MIPI CSI-2 Receiver Subsystem is used to capture MIPI CSI-2
diff --git a/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml
new file mode 100644
index 0000000000000..ac1a5a17749d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nuvoton,npcm-memory-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Memory Controller
+
+maintainers:
+  - Marvin Lin <kflin@nuvoton.com>
+  - Stanley Chu <yschu@nuvoton.com>
+
+description: |
+  The Nuvoton BMC SoC supports DDR4 memory with or without ECC (error correction
+  check).
+
+  The memory controller supports single bit error correction, double bit error
+  detection (in-line ECC in which a section (1/8th) of the memory device used to
+  store data is used for ECC storage).
+
+  Note, the bootloader must configure ECC mode for the memory controller.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-memory-controller
+      - nuvoton,npcm845-memory-controller
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mc: memory-controller@f0824000 {
+        compatible = "nuvoton,npcm750-memory-controller";
+        reg = <0xf0824000 0x1000>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
index 2fa44951cfde0..f54e553e6c0e6 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
@@ -165,7 +165,7 @@ patternProperties:
         const: 0
 
       lpddr2:
-        $ref: "ddr/jedec,lpddr2.yaml#"
+        $ref: ddr/jedec,lpddr2.yaml#
         type: object
 
     patternProperties:
diff --git a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
index e68c4306025a1..87ff9ee098f5e 100644
--- a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
@@ -8,8 +8,7 @@ title: Synopsys DesignWare Universal Multi-Protocol Memory Controller
 
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
-  - Manish Narani <manish.narani@xilinx.com>
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 description: |
   Synopsys DesignWare Enhanced uMCTL2 DDR Memory Controller is capable of
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
index bc9406929f6cd..b049837ee6694 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
@@ -129,7 +129,7 @@ patternProperties:
       The child device node represents the device connected to the GPMC
       bus. The device can be a NAND chip, SRAM device, NOR device
       or an ASIC.
-    $ref: "ti,gpmc-child.yaml"
+    $ref: ti,gpmc-child.yaml
 
 
 required:
diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
index 8f72e2f8588ab..75143db514119 100644
--- a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
@@ -8,8 +8,7 @@ title: Zynq A05 DDR Memory Controller
 
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
-  - Manish Narani <manish.narani@xilinx.com>
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 description:
   The Zynq DDR ECC controller has an optional ECC support in half-bus width
diff --git a/Documentation/devicetree/bindings/mfd/adi,max77541.yaml b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
new file mode 100644
index 0000000000000..c7895b2c38c90
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77540/MAX77541 PMIC from ADI
+
+maintainers:
+  - Okan Sahin <okan.sahin@analog.com>
+
+description: |
+  MAX77540 is a Power Management IC with 2 buck regulators.
+
+  MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC.
+
+properties:
+  compatible:
+    enum:
+      - adi,max77540
+      - adi,max77541
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    $ref: /schemas/regulator/adi,max77541-regulator.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+            compatible = "adi,max77541";
+            reg = <0x69>;
+            interrupt-parent = <&gpio>;
+            interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+            regulators {
+                buck1 {
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <5200000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                buck2 {
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <5200000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
index 148f1da476031..9f9a14af875ee 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
@@ -35,11 +35,11 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
-      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
 
   "^pinctrl@[0-9a-f]+$":
     # Child node
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
index 7e582243ea765..803277dd27250 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
@@ -35,11 +35,11 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
-      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
 
   "^pinctrl@[0-9a-f]+$":
     # Child node
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
index 2230848e11c3a..b9a6856ce970b 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
@@ -35,11 +35,11 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
-      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
 
   "^pinctrl@[0-9a-f]+$":
     # Child node
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
index c06693b6f7aa0..4651fe4dde079 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
@@ -35,11 +35,11 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
-      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
 
   "^pinctrl@[0-9a-f]+$":
     # Child node
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
index c560bede0e37a..0330b621fd381 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
@@ -35,11 +35,11 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
-      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
 
   "^pinctrl@[0-9a-f]+$":
     # Child node
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
index c534f5f2404e3..82d3e4415bda9 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
@@ -35,11 +35,11 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
-      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
 
   "^pinctrl@[0-9a-f]+$":
     # Child node
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
index acb9c54942d9c..dc379f3ebf24f 100644
--- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -122,12 +122,6 @@ patternProperties:
       compatible:
         const: gw,gsc-fan
 
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       reg:
         description: The fan controller base address
         maxItems: 1
@@ -135,8 +129,6 @@ patternProperties:
     required:
       - compatible
       - reg
-      - "#address-cells"
-      - "#size-cells"
 
 required:
   - compatible
@@ -194,8 +186,6 @@ examples:
             };
 
             fan-controller@2c {
-                #address-cells = <1>;
-                #size-cells = <0>;
                 compatible = "gw,gsc-fan";
                 reg = <0x2c>;
             };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index 36de335a33aa8..8b9a2008a354e 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -71,6 +71,7 @@ properties:
           - qcom,pm8998
           - qcom,pma8084
           - qcom,pmd9635
+          - qcom,pmi632
           - qcom,pmi8950
           - qcom,pmi8962
           - qcom,pmi8994
@@ -133,6 +134,7 @@ patternProperties:
     oneOf:
       - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml#
       - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml#
+      - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml#
 
   "gpio@[0-9a-f]+$":
     type: object
@@ -146,6 +148,10 @@ patternProperties:
     type: object
     $ref: /schemas/nvmem/qcom,spmi-sdam.yaml#
 
+  "phy@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml#
+
   "pon@[0-9a-f]+$":
     type: object
     $ref: /schemas/power/reset/qcom,pon.yaml#
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index fe790af7b4fbe..5ad9d5deaaf8a 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -34,6 +34,7 @@ properties:
           - qcom,tcsr-ipq5332
           - qcom,tcsr-ipq6018
           - qcom,tcsr-ipq8064
+          - qcom,tcsr-ipq8074
           - qcom,tcsr-ipq9574
           - qcom,tcsr-mdm9615
           - qcom,tcsr-msm8226
diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
new file mode 100644
index 0000000000000..386b1a50158a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/richtek,rt5033.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 Power Management Integrated Circuit
+
+maintainers:
+  - Jakob Hauser <jahau@rocketmail.com>
+
+description:
+  RT5033 is a multifunction device which includes battery charger, fuel gauge,
+  flash LED current source, LDO and synchronous Buck converter for portable
+  applications. It is interfaced to host controller using I2C interface. The
+  battery fuel gauge uses a separate I2C bus.
+
+properties:
+  compatible:
+    const: richtek,rt5033
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    description:
+      The regulators of RT5033 have to be instantiated under a sub-node named
+      "regulators". For SAFE_LDO voltage there is only one value of 4.9 V. LDO
+      voltage ranges from 1.2 V to 3.0 V in 0.1 V steps. BUCK voltage ranges
+      from 1.0 V to 3.0 V in 0.1 V steps.
+    type: object
+    patternProperties:
+      "^(SAFE_LDO|LDO|BUCK)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+    additionalProperties: false
+
+  charger:
+    type: object
+    $ref: /schemas/power/supply/richtek,rt5033-charger.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    battery: battery {
+        compatible = "simple-battery";
+        precharge-current-microamp = <450000>;
+        constant-charge-current-max-microamp = <1000000>;
+        charge-term-current-microamp = <150000>;
+        precharge-upper-limit-microvolt = <3500000>;
+        constant-charge-voltage-max-microvolt = <4350000>;
+    };
+
+    extcon {
+        usb_con: connector {
+            compatible = "usb-b-connector";
+            label = "micro-USB";
+            type = "micro";
+        };
+    };
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+
+            fuel-gauge@35 {
+                compatible = "richtek,rt5033-battery";
+                reg = <0x35>;
+
+                interrupt-parent = <&msmgpio>;
+                interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&fg_alert_default>;
+
+                power-supplies = <&rt5033_charger>;
+            };
+        };
+
+        i2c@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+
+            pmic@34 {
+                compatible = "richtek,rt5033";
+                reg = <0x34>;
+
+                interrupt-parent = <&msmgpio>;
+                interrupts = <62 IRQ_TYPE_EDGE_FALLING>;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&pmic_int_default>;
+
+                regulators {
+                    safe_ldo_reg: SAFE_LDO {
+                        regulator-name = "SAFE_LDO";
+                        regulator-min-microvolt = <4900000>;
+                        regulator-max-microvolt = <4900000>;
+                        regulator-always-on;
+                    };
+                    ldo_reg: LDO {
+                        regulator-name = "LDO";
+                        regulator-min-microvolt = <2800000>;
+                        regulator-max-microvolt = <2800000>;
+                    };
+                    buck_reg: BUCK {
+                        regulator-name = "BUCK";
+                        regulator-min-microvolt = <1200000>;
+                        regulator-max-microvolt = <1200000>;
+                    };
+                };
+
+                rt5033_charger: charger {
+                    compatible = "richtek,rt5033-charger";
+                    monitored-battery = <&battery>;
+                    richtek,usb-connector = <&usb_con>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
new file mode 100644
index 0000000000000..cf2500f2e9a0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
@@ -0,0 +1,406 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk806.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK806 Power Management Integrated Circuit
+
+maintainers:
+  - Sebastian Reichel <sebastian.reichel@collabora.com>
+
+description:
+  Rockchip RK806 series PMIC. This device consists of an spi or
+  i2c controlled MFD that includes multiple switchable regulators.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk806
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  vcc1-supply:
+    description:
+      The input supply for dcdc-reg1.
+
+  vcc2-supply:
+    description:
+      The input supply for dcdc-reg2.
+
+  vcc3-supply:
+    description:
+      The input supply for dcdc-reg3.
+
+  vcc4-supply:
+    description:
+      The input supply for dcdc-reg4.
+
+  vcc5-supply:
+    description:
+      The input supply for dcdc-reg5.
+
+  vcc6-supply:
+    description:
+      The input supply for dcdc-reg6.
+
+  vcc7-supply:
+    description:
+      The input supply for dcdc-reg7.
+
+  vcc8-supply:
+    description:
+      The input supply for dcdc-reg8.
+
+  vcc9-supply:
+    description:
+      The input supply for dcdc-reg9.
+
+  vcc10-supply:
+    description:
+      The input supply for dcdc-reg10.
+
+  vcc11-supply:
+    description:
+      The input supply for pldo-reg1, pldo-reg2 and pldo-reg3.
+
+  vcc12-supply:
+    description:
+      The input supply for pldo-reg4 and pldo-reg5.
+
+  vcc13-supply:
+    description:
+      The input supply for nldo-reg1, nldo-reg2 and nldo-reg3.
+
+  vcc14-supply:
+    description:
+      The input supply for nldo-reg4 and nldo-reg5.
+
+  vcca-supply:
+    description:
+      The input supply for pldo-reg6.
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(dcdc-reg([1-9]|10)|pldo-reg[1-6]|nldo-reg[1-5])$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    $ref: /schemas/pinctrl/pinmux-node.yaml
+
+    properties:
+      function:
+        enum: [pin_fun0, pin_fun1, pin_fun2, pin_fun3, pin_fun4, pin_fun5]
+
+      pins:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [gpio_pwrctrl1, gpio_pwrctrl2, gpio_pwrctrl3]
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@0 {
+            compatible = "rockchip,rk806";
+            reg = <0x0>;
+
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+            vcc1-supply = <&vcc5v0_sys>;
+            vcc2-supply = <&vcc5v0_sys>;
+            vcc3-supply = <&vcc5v0_sys>;
+            vcc4-supply = <&vcc5v0_sys>;
+            vcc5-supply = <&vcc5v0_sys>;
+            vcc6-supply = <&vcc5v0_sys>;
+            vcc7-supply = <&vcc5v0_sys>;
+            vcc8-supply = <&vcc5v0_sys>;
+            vcc9-supply = <&vcc5v0_sys>;
+            vcc10-supply = <&vcc5v0_sys>;
+            vcc11-supply = <&vcc_2v0_pldo_s3>;
+            vcc12-supply = <&vcc5v0_sys>;
+            vcc13-supply = <&vcc5v0_sys>;
+            vcc14-supply = <&vcc_1v1_nldo_s3>;
+            vcca-supply = <&vcc5v0_sys>;
+
+            regulators {
+                vdd_gpu_s0: dcdc-reg1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <550000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_gpu_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_npu_s0: dcdc-reg2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <550000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_npu_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_log_s0: dcdc-reg3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <750000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_log_s0";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <750000>;
+                    };
+                };
+
+                vdd_vdenc_s0: dcdc-reg4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <550000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_vdenc_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_gpu_mem_s0: dcdc-reg5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <675000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_gpu_mem_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_npu_mem_s0: dcdc-reg6 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <675000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_npu_mem_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_2v0_pldo_s3: dcdc-reg7 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <2000000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_2v0_pldo_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <2000000>;
+                    };
+                };
+
+                vdd_vdenc_mem_s0: dcdc-reg8 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <675000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_vdenc_mem_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd2_ddr_s3: dcdc-reg9 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vdd2_ddr_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_1v1_nldo_s3: dcdc-reg10 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vcc_1v1_nldo_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1100000>;
+                    };
+                };
+
+                avcc_1v8_s0: pldo-reg1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "avcc_1v8_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd1_1v8_ddr_s3: pldo-reg2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd1_1v8_ddr_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc_1v8_s3: pldo-reg3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vcc_1v8_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc_3v3_s0: pldo-reg4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vcc_3v3_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vccio_sd_s0: pldo-reg5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vccio_sd_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                master_pldo6_s3: pldo-reg6 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-name = "master_pldo6_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_0v75_s3: nldo-reg1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <750000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_0v75_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <750000>;
+                    };
+                };
+
+                vdd2l_0v9_ddr_s3: nldo-reg2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <900000>;
+                    regulator-name = "vdd2l_0v9_ddr_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <900000>;
+                    };
+                };
+
+                master_nldo3: nldo-reg3 {
+                    regulator-name = "master_nldo3";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                avdd_0v75_s0: nldo-reg4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <750000>;
+                    regulator-name = "avdd_0v75_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_0v85_s0: nldo-reg5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <850000>;
+                    regulator-name = "vdd_0v85_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
index 10c7b408f33aa..aea0b7d57d04e 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
+++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
@@ -153,29 +153,18 @@ dependencies:
 additionalProperties: false
 
 allOf:
-  - if:
+  - not:
       required:
         - s5m8767,pmic-buck2-uses-gpio-dvs
-    then:
-      properties:
-        s5m8767,pmic-buck3-uses-gpio-dvs: false
-        s5m8767,pmic-buck4-uses-gpio-dvs: false
-
-  - if:
-      required:
         - s5m8767,pmic-buck3-uses-gpio-dvs
-    then:
-      properties:
-        s5m8767,pmic-buck2-uses-gpio-dvs: false
-        s5m8767,pmic-buck4-uses-gpio-dvs: false
-
-  - if:
+  - not:
       required:
+        - s5m8767,pmic-buck2-uses-gpio-dvs
+        - s5m8767,pmic-buck4-uses-gpio-dvs
+  - not:
+      required:
+        - s5m8767,pmic-buck3-uses-gpio-dvs
         - s5m8767,pmic-buck4-uses-gpio-dvs
-    then:
-      properties:
-        s5m8767,pmic-buck2-uses-gpio-dvs: false
-        s5m8767,pmic-buck3-uses-gpio-dvs: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
index 9573e4af949ee..97c61097f9e26 100644
--- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
@@ -184,7 +184,7 @@ properties:
         additionalProperties: false
 
     patternProperties:
-      "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$":
+      "^(buck[1-4]|ldo[1-6]|vref_ddr|boost|pwr_sw[1-2])-supply$":
         description: STPMIC1 voltage regulators supplies
 
       "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$":
diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
index 0c98d913747bb..e6289fbe69070 100644
--- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -101,7 +101,7 @@ examples:
         };
 
         clock-controller@4140 {
-            compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+            compatible = "ti,am654-ehrpwm-tbclk";
             reg = <0x4140 0x18>;
             #clock-cells = <1>;
         };
diff --git a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
new file mode 100644
index 0000000000000..9d43376bebed1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,tps6594.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS6594 Power Management Integrated Circuit
+
+maintainers:
+  - Julien Panis <jpanis@baylibre.com>
+
+description:
+  TPS6594 is a Power Management IC which provides regulators and others
+  features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
+  PFSM (Pre-configurable Finite State Machine) managing the state of the device.
+  TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives.
+
+properties:
+  compatible:
+    enum:
+      - ti,lp8764-q1
+      - ti,tps6593-q1
+      - ti,tps6594-q1
+
+  reg:
+    description: I2C slave address or SPI chip select number.
+    maxItems: 1
+
+  ti,primary-pmic:
+    type: boolean
+    description: |
+      Identify the primary PMIC on SPMI bus.
+      A multi-PMIC synchronization scheme is implemented in the PMIC device
+      to synchronize the power state changes with other PMIC devices. This is
+      accomplished through a SPMI bus: the primary PMIC is the controller
+      device on the SPMI bus, and the secondary PMICs are the target devices
+      on the SPMI bus.
+
+  system-power-controller: true
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description: |
+      The first cell is the pin number, the second cell is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: List of regulators provided by this controller.
+
+    patternProperties:
+      "^buck([1-5]|12|34|123|1234)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+        unevaluatedProperties: false
+
+      "^ldo[1-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+        unevaluatedProperties: false
+
+    allOf:
+      - if:
+          required:
+            - buck12
+        then:
+          properties:
+            buck123: false
+            buck1234: false
+      - if:
+          required:
+            - buck123
+        then:
+          properties:
+            buck34: false
+      - if:
+          required:
+            - buck1234
+        then:
+          properties:
+            buck34: false
+
+    additionalProperties: false
+
+patternProperties:
+  "^buck([1-5]|12|34|123|1234)-supply$":
+    description: Input supply phandle for each buck.
+
+  "^ldo[1-4]-supply$":
+    description: Input supply phandle for each ldo.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tps6593: pmic@48 {
+            compatible = "ti,tps6593-q1";
+            reg = <0x48>;
+            ti,primary-pmic;
+            system-power-controller;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_irq_pins_default>;
+            interrupt-parent = <&mcu_gpio0>;
+            interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+            buck123-supply = <&vcc_3v3_sys>;
+            buck4-supply = <&vcc_3v3_sys>;
+            buck5-supply = <&vcc_3v3_sys>;
+            ldo1-supply = <&vcc_3v3_sys>;
+            ldo2-supply = <&vcc_3v3_sys>;
+            ldo3-supply = <&buck5>;
+            ldo4-supply = <&vcc_3v3_sys>;
+
+            regulators {
+                buck123: buck123 {
+                    regulator-name = "vcc_core";
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <850000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck4: buck4 {
+                    regulator-name = "vcc_1v1";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck5: buck5 {
+                    regulator-name = "vcc_1v8_sys";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo1: ldo1 {
+                    regulator-name = "vddshv5_sdio";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo2: ldo2 {
+                    regulator-name = "vpp_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo3: ldo3 {
+                    regulator-name = "vcc_0v85";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <850000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo4: ldo4 {
+                    regulator-name = "vdda_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
index f7f0f2c0421ac..9ad55746133b5 100644
--- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
+++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@@ -90,6 +90,7 @@ properties:
     oneOf:
       - enum:
           - x-powers,axp152
+          - x-powers,axp192
           - x-powers,axp202
           - x-powers,axp209
           - x-powers,axp221
diff --git a/Documentation/devicetree/bindings/mips/ralink.yaml b/Documentation/devicetree/bindings/mips/ralink.yaml
index 704b5b5951271..53c1f66353770 100644
--- a/Documentation/devicetree/bindings/mips/ralink.yaml
+++ b/Documentation/devicetree/bindings/mips/ralink.yaml
@@ -80,6 +80,7 @@ properties:
           - enum:
               - gnubee,gb-pc1
               - gnubee,gb-pc2
+              - tplink,hc220-g5-v1
           - const: mediatek,mt7621-soc
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt
deleted file mode 100644
index 05b47232ed9ed..0000000000000
--- a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom Secure Monitor Bounce buffer
------------------------------------------------------
-This binding defines the location of the bounce buffer
-used for non-secure to secure communications.
-
-Required properties:
-- compatible : "brcm,kona-smc"
-- DEPRECATED: compatible : "bcm,kona-smc"
-- reg : Location and size of bounce buffer
-
-Example:
-	smc@3404c000 {
-		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
-		reg = <0x3404c000 0x400>; //1 KiB in SRAM
-	};
diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
index 1ab9588cdd896..2dc3e245fa5d3 100644
--- a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
+++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
@@ -36,7 +36,7 @@ properties:
     description:
       A list of channels tied to this function, used for matching
       the function to a set of virtual channels.
-    $ref: "/schemas/types.yaml#/definitions/string-array"
+    $ref: /schemas/types.yaml#/definitions/string-array
     items:
       - const: fastrpcglink-apps-dsp
 
@@ -48,14 +48,14 @@ properties:
   qcom,smd-channels:
     description:
       Channel name used for the RPM communication
-    $ref: "/schemas/types.yaml#/definitions/string-array"
+    $ref: /schemas/types.yaml#/definitions/string-array
     items:
       - const: fastrpcsmd-apps-dsp
 
   qcom,vmids:
     description:
       Virtual machine IDs for remote processor.
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   "#address-cells":
     const: 1
diff --git a/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml
new file mode 100644
index 0000000000000..0c9a8444844c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/ti,j721e-esm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 ESM
+
+maintainers:
+  - Neha Malcom Francis <n-francis@ti.com>
+
+description:
+  The ESM (Error Signaling Module) is an IP block on TI K3 devices
+  that allows handling of safety events somewhat similar to what interrupt
+  controller would do. The safety signals have their separate paths within
+  the SoC, and they are handled by the ESM, which routes them to the proper
+  destination, which can be system reset, interrupt controller, etc. In the
+  simplest configuration the signals are just routed to reset the SoC.
+
+properties:
+  compatible:
+    const: ti,j721e-esm
+
+  reg:
+    maxItems: 1
+
+  ti,esm-pins:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      integer array of ESM interrupt pins to route to external event pin
+      which can be used to reset the SoC.
+    minItems: 1
+    maxItems: 255
+
+required:
+  - compatible
+  - reg
+  - ti,esm-pins
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        esm@700000 {
+            compatible = "ti,j721e-esm";
+            reg = <0x0 0x700000 0x0 0x1000>;
+            ti,esm-pins = <344>, <345>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index 1c96da04f0e53..2459a55ed540b 100644
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -53,10 +53,11 @@ properties:
         items:
           - const: arm,pl18x
           - const: arm,primecell
-      - description: Entry for STMicroelectronics variant of PL18x.
-          This dedicated compatible is used by bootloaders.
+      - description: Entries for STMicroelectronics variant of PL18x.
         items:
-          - const: st,stm32-sdmmc2
+          - enum:
+              - st,stm32-sdmmc2
+              - st,stm32mp25-sdmmc2
           - const: arm,pl18x
           - const: arm,primecell
 
diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
deleted file mode 100644
index d876580ae3b83..0000000000000
--- a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Broadcom BCM2835 SDHOST controller
-
-This file documents differences between the core properties described
-by mmc.txt and the properties that represent the BCM2835 controller.
-
-Required properties:
-- compatible: Should be "brcm,bcm2835-sdhost".
-- clocks: The clock feeding the SDHOST controller.
-
-Optional properties:
-- dmas: DMA channel for read and write.
-          See Documentation/devicetree/bindings/dma/dma.txt for details
-
-Example:
-
-sdhost: mmc@7e202000 {
-	compatible = "brcm,bcm2835-sdhost";
-	reg = <0x7e202000 0x100>;
-	interrupts = <2 24>;
-	clocks = <&clocks BCM2835_CLOCK_VPU>;
-	dmas = <&dma 13>;
-	dma-names = "rx-tx";
-};
diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml
new file mode 100644
index 0000000000000..3a5a448006751
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,bcm2835-sdhost.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 SDHOST controller
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+properties:
+  compatible:
+    const: brcm,bcm2835-sdhost
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    sdhost: mmc@7e202000 {
+      compatible = "brcm,bcm2835-sdhost";
+      reg = <0x7e202000 0x100>;
+      interrupts = <2 24>;
+      clocks = <&clocks BCM2835_CLOCK_VPU>;
+      dmas = <&dma 13>;
+      dma-names = "rx-tx";
+      bus-width = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt
deleted file mode 100644
index 7f5dd83f5bd95..0000000000000
--- a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Broadcom BCM281xx SDHCI
-
-This file documents differences between the core properties in mmc.txt
-and the properties present in the bcm281xx SDHCI
-
-Required properties:
-- compatible : Should be "brcm,kona-sdhci"
-- DEPRECATED: compatible : Should be "bcm,kona-sdhci"
-- clocks: phandle + clock specifier pair of the external clock
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
-
-sdio2: sdio@3f1a0000 {
-	compatible = "brcm,kona-sdhci";
-	reg = <0x3f1a0000 0x10000>;
-	clocks = <&sdio3_clk>;
-	interrupts = <0x0 74 0x4>;
-};
-
diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml
new file mode 100644
index 0000000000000..12eb3988f8247
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,kona-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family SDHCI controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+properties:
+  compatible:
+    const: brcm,kona-sdhci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/bcm281xx.h>
+
+    mmc@3f1a0000 {
+        compatible = "brcm,kona-sdhci";
+        reg = <0x3f1a0000 0x10000>;
+        clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
+        interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index fbfd822b92707..82eb7a24c8578 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -42,6 +42,7 @@ properties:
           - enum:
               - fsl,imx6sll-usdhc
               - fsl,imx6ull-usdhc
+              - fsl,imx6ul-usdhc
           - const: fsl,imx6sx-usdhc
       - items:
           - const: fsl,imx7d-usdhc
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index 4f2d9e8127dd3..6da28e6305778 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -36,11 +36,14 @@ properties:
           - enum:
               - qcom,ipq5018-sdhci
               - qcom,ipq5332-sdhci
+              - qcom,ipq6018-sdhci
               - qcom,ipq9574-sdhci
               - qcom,qcm2290-sdhci
               - qcom,qcs404-sdhci
+              - qcom,qdu1000-sdhci
               - qcom,sc7180-sdhci
               - qcom,sc7280-sdhci
+              - qcom,sc8280xp-sdhci
               - qcom,sdm630-sdhci
               - qcom,sdm670-sdhci
               - qcom,sdm845-sdhci
diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
index 9a88870cd8655..054b6b8bf9b91 100644
--- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
@@ -49,13 +49,12 @@ properties:
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
+    $ref: raw-nand-chip.yaml
     properties:
       reg:
         minimum: 0
         maximum: 7
 
-      nand-ecc-mode: true
-
       nand-ecc-algo:
         const: bch
 
@@ -75,7 +74,7 @@ patternProperties:
           minimum: 0
           maximum: 1
 
-    additionalProperties: false
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
index 28fb9a7dd70f1..787ef488dd5b1 100644
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -40,6 +40,7 @@ properties:
 patternProperties:
   "^nand@[0-7]$":
     type: object
+    $ref: raw-nand-chip.yaml
     properties:
       reg:
         minimum: 0
@@ -58,6 +59,14 @@ patternProperties:
             meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
             meson-axg-nfc 8
 
+      nand-rb:
+        maxItems: 1
+        items:
+          maximum: 0
+
+    unevaluatedProperties: false
+
+
 required:
   - compatible
   - reg
@@ -87,6 +96,7 @@ examples:
 
       nand@0 {
         reg = <0>;
+        nand-rb = <0>;
       };
     };
 
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
index 1571024aa1190..f57e96374e671 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
@@ -114,6 +114,7 @@ properties:
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
+    $ref: raw-nand-chip.yaml
     properties:
       compatible:
         const: brcm,nandcs
@@ -136,6 +137,8 @@ patternProperties:
           layout.
         $ref: /schemas/types.yaml#/definitions/uint32
 
+    unevaluatedProperties: false
+
 allOf:
   - $ref: nand-controller.yaml#
   - if:
diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
index 0be83ad429705..81f95538d415a 100644
--- a/Documentation/devicetree/bindings/mtd/denali,nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
@@ -63,6 +63,12 @@ properties:
     minItems: 1
     maxItems: 2
 
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+    unevaluatedProperties: false
+
 allOf:
   - $ref: nand-controller.yaml
 
@@ -74,7 +80,6 @@ allOf:
     then:
       patternProperties:
         "^nand@[a-f0-9]$":
-          type: object
           properties:
             nand-ecc-strength:
               enum:
@@ -92,7 +97,6 @@ allOf:
     then:
       patternProperties:
         "^nand@[a-f0-9]$":
-          type: object
           properties:
             nand-ecc-strength:
               enum:
@@ -111,7 +115,6 @@ allOf:
     then:
       patternProperties:
         "^nand@[a-f0-9]$":
-          type: object
           properties:
             nand-ecc-strength:
               enum:
diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
index a7bdb5d3675cf..b9312ebefeb96 100644
--- a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
@@ -39,7 +39,9 @@ properties:
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
+    $ref: raw-nand-chip.yaml
     properties:
+
       rb-gpios:
         description: GPIO specifier for the busy pin.
         maxItems: 1
@@ -48,6 +50,8 @@ patternProperties:
         description: GPIO specifier for the write-protect pin.
         maxItems: 1
 
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
index cc3def758e001..07bc7e3efd3a8 100644
--- a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
+++ b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
@@ -42,17 +42,16 @@ properties:
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
+    $ref: raw-nand-chip.yaml
     properties:
       reg:
         minimum: 0
         maximum: 1
 
-      nand-ecc-mode: true
-
       nand-ecc-algo:
         const: hw
 
-    additionalProperties: false
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
new file mode 100644
index 0000000000000..a10729bb18400
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/marvell,nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell NAND Flash Controller (NFC)
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: marvell,armada-8k-nand-controller
+          - const: marvell,armada370-nand-controller
+      - enum:
+          - marvell,armada370-nand-controller
+          - marvell,pxa3xx-nand-controller
+      - description: legacy bindings
+        deprecated: true
+        enum:
+          - marvell,armada-8k-nand
+          - marvell,armada370-nand
+          - marvell,pxa3xx-nand
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Shall reference the NAND controller clocks, the second one is
+      is only needed for the Armada 7K/8K SoCs
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: reg
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: data
+
+  marvell,system-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Syscon node that handles NAND controller related registers
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+
+      nand-rb:
+        items:
+          - minimum: 0
+            maximum: 1
+
+      nand-ecc-step-size:
+        const: 512
+
+      nand-ecc-strength:
+        enum: [1, 4, 8, 12, 16]
+
+      nand-ecc-mode:
+        const: hw
+
+      marvell,nand-keep-config:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Orders the driver not to take the timings from the core and
+          leaving them completely untouched. Bootloader timings will then
+          be used.
+
+      marvell,nand-enable-arbiter:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          To enable the arbiter, all boards blindly used it,
+          this bit was set by the bootloader for many boards and even if
+          it is marked reserved in several datasheets, it might be needed to set
+          it (otherwise it is harmless).
+        deprecated: true
+
+    required:
+      - reg
+      - nand-rb
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: nand-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,pxa3xx-nand-controller
+    then:
+      required:
+        - dmas
+        - dma-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-8k-nand-controller
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+      required:
+        - marvell,system-controller
+
+    else:
+      properties:
+        clocks:
+          minItems: 1
+
+        clock-names:
+          minItems: 1
+
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    nand_controller: nand-controller@d0000 {
+        compatible = "marvell,armada370-nand-controller";
+        reg = <0xd0000 0x54>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&coredivclk 0>;
+
+        nand@0 {
+            reg = <0>;
+            label = "main-storage";
+            nand-rb = <0>;
+            nand-ecc-mode = "hw";
+            marvell,nand-keep-config;
+            nand-on-flash-bbt;
+            nand-ecc-strength = <4>;
+            nand-ecc-step-size = <512>;
+
+            partitions {
+                compatible = "fixed-partitions";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                partition@0 {
+                    label = "Rootfs";
+                    reg = <0x00000000 0x40000000>;
+                };
+            };
+        };
+    };
+
+  - |
+    cp0_nand_controller: nand-controller@720000 {
+        compatible = "marvell,armada-8k-nand-controller",
+                "marvell,armada370-nand-controller";
+        reg = <0x720000 0x54>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "core", "reg";
+        clocks = <&cp0_clk 1 2>,
+                 <&cp0_clk 1 17>;
+        marvell,system-controller = <&cp0_syscon0>;
+
+        nand@0 {
+            reg = <0>;
+            label = "main-storage";
+            nand-rb = <0>;
+            nand-ecc-mode = "hw";
+            nand-ecc-strength = <8>;
+            nand-ecc-step-size = <512>;
+        };
+    };
+
+  - |
+    nand-controller@43100000 {
+        compatible = "marvell,pxa3xx-nand-controller";
+        reg = <0x43100000 90>;
+        interrupts = <45>;
+        clocks = <&clks 1>;
+        clock-names = "core";
+        dmas = <&pdma 97 3>;
+        dma-names = "data";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        nand@0 {
+            reg = <0>;
+            nand-rb = <0>;
+            nand-ecc-mode = "hw";
+            marvell,nand-keep-config;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/Documentation/devicetree/bindings/mtd/marvell-nand.txt
deleted file mode 100644
index a2d9a0f2b683a..0000000000000
--- a/Documentation/devicetree/bindings/mtd/marvell-nand.txt
+++ /dev/null
@@ -1,126 +0,0 @@
-Marvell NAND Flash Controller (NFC)
-
-Required properties:
-- compatible: can be one of the following:
-    * "marvell,armada-8k-nand-controller"
-    * "marvell,armada370-nand-controller"
-    * "marvell,pxa3xx-nand-controller"
-    * "marvell,armada-8k-nand" (deprecated)
-    * "marvell,armada370-nand" (deprecated)
-    * "marvell,pxa3xx-nand" (deprecated)
-  Compatibles marked deprecated support only the old bindings described
-  at the bottom.
-- reg: NAND flash controller memory area.
-- #address-cells: shall be set to 1. Encode the NAND CS.
-- #size-cells: shall be set to 0.
-- interrupts: shall define the NAND controller interrupt.
-- clocks: shall reference the NAND controller clocks, the second one is
-  is only needed for the Armada 7K/8K SoCs
-- clock-names: mandatory if there is a second clock, in this case there
-  should be one clock named "core" and another one named "reg"
-- marvell,system-controller: Set to retrieve the syscon node that handles
-  NAND controller related registers (only required with the
-  "marvell,armada-8k-nand[-controller]" compatibles).
-
-Optional properties:
-- label: see partition.txt. New platforms shall omit this property.
-- dmas: shall reference DMA channel associated to the NAND controller.
-  This property is only used with "marvell,pxa3xx-nand[-controller]"
-  compatible strings.
-- dma-names: shall be "rxtx".
-  This property is only used with "marvell,pxa3xx-nand[-controller]"
-  compatible strings.
-
-Optional children nodes:
-Children nodes represent the available NAND chips.
-
-Required properties:
-- reg: shall contain the native Chip Select ids (0-3).
-- nand-rb: see nand-controller.yaml (0-1).
-
-Optional properties:
-- marvell,nand-keep-config: orders the driver not to take the timings
-  from the core and leaving them completely untouched. Bootloader
-  timings will then be used.
-- label: MTD name.
-- nand-on-flash-bbt: see nand-controller.yaml.
-- nand-ecc-mode: see nand-controller.yaml. Will use hardware ECC if not specified.
-- nand-ecc-algo: see nand-controller.yaml. This property is essentially useful when
-  not using hardware ECC. Howerver, it may be added when using hardware
-  ECC for clarification but will be ignored by the driver because ECC
-  mode is chosen depending on the page size and the strength required by
-  the NAND chip. This value may be overwritten with nand-ecc-strength
-  property.
-- nand-ecc-strength: see nand-controller.yaml.
-- nand-ecc-step-size: see nand-controller.yaml. Marvell's NAND flash controller does
-  use fixed strength (1-bit for Hamming, 16-bit for BCH), so the actual
-  step size will shrink or grow in order to fit the required strength.
-  Step sizes are not completely random for all and follow certain
-  patterns described in AN-379, "Marvell SoC NFC ECC".
-
-See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on
-generic bindings.
-
-
-Example:
-nand_controller: nand-controller@d0000 {
-	compatible = "marvell,armada370-nand-controller";
-	reg = <0xd0000 0x54>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&coredivclk 0>;
-
-	nand@0 {
-		reg = <0>;
-		label = "main-storage";
-		nand-rb = <0>;
-		nand-ecc-mode = "hw";
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "Rootfs";
-				reg = <0x00000000 0x40000000>;
-			};
-		};
-	};
-};
-
-
-Note on legacy bindings: One can find, in not-updated device trees,
-bindings slightly different than described above with other properties
-described below as well as the partitions node at the root of a so
-called "nand" node (without clear controller/chip separation).
-
-Legacy properties:
-- marvell,nand-enable-arbiter: To enable the arbiter, all boards blindly
-  used it, this bit was set by the bootloader for many boards and even if
-  it is marked reserved in several datasheets, it might be needed to set
-  it (otherwise it is harmless) so whether or not this property is set,
-  the bit is selected by the driver.
-- num-cs: Number of chip-select lines to use, all boards blindly set 1
-  to this and for a reason, other values would have failed. The value of
-  this property is ignored.
-
-Example:
-
-	nand0: nand@43100000 {
-		compatible = "marvell,pxa3xx-nand";
-		reg = <0x43100000 90>;
-		interrupts = <45>;
-		dmas = <&pdma 97 0>;
-		dma-names = "rxtx";
-		#address-cells = <1>;
-		marvell,nand-keep-config;
-		marvell,nand-enable-arbiter;
-		num-cs = <1>;
-		/* Partitions (optional) */
-       };
diff --git a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
index a6e7f123eda7e..ab503a33a2698 100644
--- a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
+++ b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
@@ -40,12 +40,11 @@ properties:
 
 patternProperties:
   "^nand@[a-f0-9]$":
-    $ref: nand-chip.yaml#
+    $ref: raw-nand-chip.yaml#
     unevaluatedProperties: false
     properties:
       reg:
         maximum: 1
-      nand-on-flash-bbt: true
       nand-ecc-mode:
         const: hw
 
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
index f8c976898a958..18f6733408b49 100644
--- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
@@ -164,7 +164,7 @@ examples:
             reg = <0 0xf80000>;
         };
         firmware@f80000 {
-            label ="firmware";
+            label = "firmware";
             reg = <0xf80000 0x80000>;
             read-only;
         };
diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml
index da3d488c335f7..b82ca03e969c2 100644
--- a/Documentation/devicetree/bindings/mtd/mtd.yaml
+++ b/Documentation/devicetree/bindings/mtd/mtd.yaml
@@ -12,7 +12,7 @@ maintainers:
 
 properties:
   $nodename:
-    pattern: "^(flash|.*sram)(@.*)?$"
+    pattern: "^(flash|.*sram|nand)(@.*)?$"
 
   label:
     description:
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index f70a32d2d9d4d..83a4fe4cc29d3 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -16,16 +16,6 @@ description: |
   children nodes of the NAND controller. This representation should be
   enforced even for simple controllers supporting only one chip.
 
-  The ECC strength and ECC step size properties define the user
-  desires in terms of correction capability of a controller. Together,
-  they request the ECC engine to correct {strength} bit errors per
-  {size} bytes.
-
-  The interpretation of these parameters is implementation-defined, so
-  not all implementations must support all possible
-  combinations. However, implementations are encouraged to further
-  specify the value(s) they support.
-
 properties:
   $nodename:
     pattern: "^nand-controller(@.*)?"
@@ -51,79 +41,8 @@ properties:
 
 patternProperties:
   "^nand@[a-f0-9]$":
-    $ref: nand-chip.yaml#
-
-    properties:
-      reg:
-        description:
-          Contains the chip-select IDs.
-
-      nand-ecc-placement:
-        description:
-          Location of the ECC bytes. This location is unknown by default
-          but can be explicitly set to "oob", if all ECC bytes are
-          known to be stored in the OOB area, or "interleaved" if ECC
-          bytes will be interleaved with regular data in the main area.
-        $ref: /schemas/types.yaml#/definitions/string
-        enum: [ oob, interleaved ]
-
-      nand-bus-width:
-        description:
-          Bus width to the NAND chip
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [8, 16]
-        default: 8
-
-      nand-on-flash-bbt:
-        description:
-          With this property, the OS will search the device for a Bad
-          Block Table (BBT). If not found, it will create one, reserve
-          a few blocks at the end of the device to store it and update
-          it as the device ages. Otherwise, the out-of-band area of a
-          few pages of all the blocks will be scanned at boot time to
-          find Bad Block Markers (BBM). These markers will help to
-          build a volatile BBT in RAM.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      nand-ecc-maximize:
-        description:
-          Whether or not the ECC strength should be maximized. The
-          maximum ECC strength is both controller and chip
-          dependent. The ECC engine has to select the ECC config
-          providing the best strength and taking the OOB area size
-          constraint into account. This is particularly useful when
-          only the in-band area is used by the upper layers, and you
-          want to make your NAND as reliable as possible.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      nand-is-boot-medium:
-        description:
-          Whether or not the NAND chip is a boot medium. Drivers might
-          use this information to select ECC algorithms supported by
-          the boot ROM or similar restrictions.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      nand-rb:
-        description:
-          Contains the native Ready/Busy IDs.
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-
-      rb-gpios:
-        description:
-          Contains one or more GPIO descriptor (the numper of descriptor
-          depends on the number of R/B pins exposed by the flash) for the
-          Ready/Busy pins. Active state refers to the NAND ready state and
-          should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
-
-      wp-gpios:
-        description:
-          Contains one GPIO descriptor for the Write Protect pin.
-          Active state refers to the NAND Write Protect state and should be
-          set to GPIOD_ACTIVE_LOW unless the signal is inverted.
-        maxItems: 1
-
-    required:
-      - reg
+    type: object
+    $ref: raw-nand-chip.yaml#
 
 required:
   - "#address-cells"
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
index cdffbb9cedc2d..1ebe9e2347eaf 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -55,6 +55,7 @@ properties:
   linux,rootfs:
     description: Marks partition that contains root filesystem to mount and boot
       user space from
+    type: boolean
 
 if:
   not:
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
index 2edc65e0e3610..1dda2c80747bd 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
@@ -21,6 +21,7 @@ oneOf:
   - $ref: linksys,ns-partitions.yaml
   - $ref: qcom,smem-part.yaml
   - $ref: redboot-fis.yaml
+  - $ref: tplink,safeloader-partitions.yaml
 
 properties:
   compatible: true
diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
index 00c991ffa6c45..4ada60fbf81de 100644
--- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
+++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -34,7 +34,9 @@ properties:
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
+    $ref: raw-nand-chip.yaml
     properties:
+
       nand-bus-width:
         const: 8
 
@@ -45,6 +47,24 @@ patternProperties:
         enum:
           - 512
 
+      qcom,boot-partitions:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: offset
+            - description: size
+        description:
+          Boot partition use a different layout where the 4 bytes of spare
+          data are not protected by ECC. Use this to declare these special
+          partitions by defining first the offset and then the size.
+
+          It's in the form of <offset1 size1 offset2 size2 offset3 ...>
+          and should be declared in ascending order.
+
+          Refer to the ipq8064 example on how to use this special binding.
+
+    unevaluatedProperties: false
+
 allOf:
   - $ref: nand-controller.yaml#
 
@@ -107,22 +127,15 @@ allOf:
               - qcom,ipq806x-nand
 
     then:
-      properties:
-        qcom,boot-partitions:
-          $ref: /schemas/types.yaml#/definitions/uint32-matrix
-          items:
-            items:
-              - description: offset
-              - description: size
-          description:
-            Boot partition use a different layout where the 4 bytes of spare
-            data are not protected by ECC. Use this to declare these special
-            partitions by defining first the offset and then the size.
-
-            It's in the form of <offset1 size1 offset2 size2 offset3 ...>
-            and should be declared in ascending order.
-
-            Refer to the ipq8064 example on how to use this special binding.
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            qcom,boot-partitions: true
+    else:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            qcom,boot-partitions: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml
new file mode 100644
index 0000000000000..092448d7bfc5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/raw-nand-chip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raw NAND Chip Common Properties
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: nand-chip.yaml#
+
+description: |
+  The ECC strength and ECC step size properties define the user
+  desires in terms of correction capability of a controller. Together,
+  they request the ECC engine to correct {strength} bit errors per
+  {size} bytes for a particular raw NAND chip.
+
+  The interpretation of these parameters is implementation-defined, so
+  not all implementations must support all possible
+  combinations. However, implementations are encouraged to further
+  specify the value(s) they support.
+
+properties:
+  $nodename:
+    pattern: "^nand@[a-f0-9]$"
+
+  reg:
+    description:
+      Contains the chip-select IDs.
+
+  nand-ecc-placement:
+    description:
+      Location of the ECC bytes. This location is unknown by default
+      but can be explicitly set to "oob", if all ECC bytes are
+      known to be stored in the OOB area, or "interleaved" if ECC
+      bytes will be interleaved with regular data in the main area.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ oob, interleaved ]
+    deprecated: true
+
+  nand-ecc-mode:
+    description:
+      Legacy ECC configuration mixing the ECC engine choice and
+      configuration.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [none, soft, soft_bch, hw, hw_syndrome, on-die]
+    deprecated: true
+
+  nand-bus-width:
+    description:
+      Bus width to the NAND chip
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+    default: 8
+
+  nand-on-flash-bbt:
+    description:
+      With this property, the OS will search the device for a Bad
+      Block Table (BBT). If not found, it will create one, reserve
+      a few blocks at the end of the device to store it and update
+      it as the device ages. Otherwise, the out-of-band area of a
+      few pages of all the blocks will be scanned at boot time to
+      find Bad Block Markers (BBM). These markers will help to
+      build a volatile BBT in RAM.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nand-ecc-maximize:
+    description:
+      Whether or not the ECC strength should be maximized. The
+      maximum ECC strength is both controller and chip
+      dependent. The ECC engine has to select the ECC config
+      providing the best strength and taking the OOB area size
+      constraint into account. This is particularly useful when
+      only the in-band area is used by the upper layers, and you
+      want to make your NAND as reliable as possible.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nand-is-boot-medium:
+    description:
+      Whether or not the NAND chip is a boot medium. Drivers might
+      use this information to select ECC algorithms supported by
+      the boot ROM or similar restrictions.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nand-rb:
+    description:
+      Contains the native Ready/Busy IDs.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  rb-gpios:
+    description:
+      Contains one or more GPIO descriptor (the numper of descriptor
+      depends on the number of R/B pins exposed by the flash) for the
+      Ready/Busy pins. Active state refers to the NAND ready state and
+      should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
+
+  wp-gpios:
+    description:
+      Contains one GPIO descriptor for the Write Protect pin.
+      Active state refers to the NAND Write Protect state and should be
+      set to GPIOD_ACTIVE_LOW unless the signal is inverted.
+    maxItems: 1
+
+required:
+  - reg
+
+# This is a generic file other binding inherit from and extend
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
index 7eb1d0a385653..ee53715ffdca3 100644
--- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
@@ -57,6 +57,7 @@ properties:
 patternProperties:
   "^nand@[0-7]$":
     type: object
+    $ref: raw-nand-chip.yaml
     properties:
       reg:
         minimum: 0
@@ -116,6 +117,8 @@ patternProperties:
 
           Only used in combination with 'nand-is-boot-medium'.
 
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
index 986e85ccebc7b..e72cb5bacaf0a 100644
--- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -37,6 +37,7 @@ properties:
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
+    $ref: raw-nand-chip.yaml
     properties:
       nand-ecc-step-size:
         const: 512
@@ -44,6 +45,8 @@ patternProperties:
       nand-ecc-strength:
         enum: [1, 4, 8]
 
+    unevaluatedProperties: false
+
 allOf:
   - $ref: nand-controller.yaml#
 
diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml
index 4774c92e7fc4d..df4fdc02456dd 100644
--- a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml
+++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml
@@ -30,6 +30,8 @@ properties:
 patternProperties:
   "^flash@[0-1],[0-9a-f]+$":
     type: object
+    $ref: mtd-physmap.yaml
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
index 3bd912ed7c7ea..23e92be33ac86 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Allwinner A20 GMAC
 
 allOf:
-  - $ref: "snps,dwmac.yaml#"
+  - $ref: snps,dwmac.yaml#
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index 47bc2057e6292..4bfac91868863 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -63,7 +63,7 @@ required:
   - syscon
 
 allOf:
-  - $ref: "snps,dwmac.yaml#"
+  - $ref: snps,dwmac.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml
index 9d02af4689061..f5d3b70af07a6 100644
--- a/Documentation/devicetree/bindings/net/altr,tse.yaml
+++ b/Documentation/devicetree/bindings/net/altr,tse.yaml
@@ -72,8 +72,8 @@ allOf:
         compatible:
           contains:
             enum:
-              - const: altr,tse-1.0
-              - const: ALTR,tse-1.0
+              - altr,tse-1.0
+              - ALTR,tse-1.0
     then:
       properties:
         reg:
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index a2c51a84efa55..ee7a65b528cda 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -27,7 +27,7 @@ select:
     - compatible
 
 allOf:
-  - $ref: "snps,dwmac.yaml#"
+  - $ref: snps,dwmac.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
index 57e4c87cb00b4..f01a3988538c7 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
@@ -24,11 +24,12 @@ properties:
       - nxp,88w8997-bt
 
   fw-init-baudrate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 115200
     description:
       Chip baudrate after FW is downloaded and initialized.
       This property depends on the module vendor's
-      configuration. If this property is not specified,
-      115200 is set as default.
+      configuration.
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
index 68f78b90d23a3..56cbb42b5aeaa 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -16,6 +16,7 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,qca2066-bt
       - qcom,qca6174-bt
       - qcom,qca9377-bt
       - qcom,wcn3990-bt
@@ -50,6 +51,9 @@ properties:
   vddch0-supply:
     description: VDD_CH0 supply regulator handle
 
+  vddch1-supply:
+    description: VDD_CH1 supply regulator handle
+
   vddaon-supply:
     description: VDD_AON supply regulator handle
 
@@ -95,6 +99,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,qca2066-bt
               - qcom,qca6174-bt
     then:
       required:
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
index 0e5e5db32fafd..7c90a43905319 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
@@ -55,7 +55,7 @@ properties:
 patternProperties:
   "^mdio@[0-9a-f]+$":
     type: object
-    $ref: "brcm,unimac-mdio.yaml"
+    $ref: brcm,unimac-mdio.yaml
 
     description:
       GENET internal UniMAC MDIO bus
diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
index bef5e0f895be8..bf8894a0257e9 100644
--- a/Documentation/devicetree/bindings/net/cdns,macb.yaml
+++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
@@ -109,6 +109,16 @@ properties:
   power-domains:
     maxItems: 1
 
+  cdns,rx-watermark:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the receive partial store and forward mode is activated,
+      the receiver will only begin to forward the packet to the external
+      AHB or AXI slave when enough packet data is stored in the SRAM packet buffer.
+      rx-watermark corresponds to the number of SRAM buffer locations,
+      that need to be filled, before the forwarding process is activated.
+      Width of the SRAM is platform dependent, and can be 4, 8 or 16 bytes.
+
   '#address-cells':
     const: 1
 
@@ -166,6 +176,7 @@ examples:
             compatible = "cdns,macb";
             reg = <0xfffc4000 0x4000>;
             interrupts = <21>;
+            cdns,rx-watermark = <0x44>;
             phy-mode = "rmii";
             local-mac-address = [3a 0e 03 04 05 06];
             clock-names = "pclk", "hclk", "tx_clk";
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt
index 2363b412410c3..33726134f5c96 100644
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -20,7 +20,7 @@ which is at a different MDIO base address in different switch families.
 			  6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321,
 			  6341, 6350, 6351, 6352
 - "marvell,mv88e6190"	: Switch has base address 0x00. Use with models:
-			  6190, 6190X, 6191, 6290, 6390, 6390X
+			  6163, 6190, 6190X, 6191, 6290, 6390, 6390X
 - "marvell,mv88e6250"	: Switch has base address 0x08 or 0x18. Use with model:
 			  6220, 6250
 
diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
index 9a64ed6587454..4d5f5cc6d031e 100644
--- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@@ -12,10 +12,6 @@ description:
   cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed
   depends on the SPI bus master driver.
 
-allOf:
-  - $ref: dsa.yaml#/$defs/ethernet-ports
-  - $ref: /schemas/spi/spi-peripheral-props.yaml#
-
 maintainers:
   - Vladimir Oltean <vladimir.oltean@nxp.com>
 
@@ -36,6 +32,9 @@ properties:
   reg:
     maxItems: 1
 
+  spi-cpha: true
+  spi-cpol: true
+
   # Optional container node for the 2 internal MDIO buses of the SJA1110
   # (one for the internal 100base-T1 PHYs and the other for the single
   # 100base-TX PHY). The "reg" property does not have physical significance.
@@ -109,6 +108,30 @@ $defs:
        1860, 1880, 1900, 1920, 1940, 1960, 1980, 2000, 2020, 2040, 2060, 2080,
        2100, 2120, 2140, 2160, 2180, 2200, 2220, 2240, 2260]
 
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nxp,sja1105e
+            - nxp,sja1105p
+            - nxp,sja1105q
+            - nxp,sja1105r
+            - nxp,sja1105s
+            - nxp,sja1105t
+    then:
+      properties:
+        spi-cpol: false
+      required:
+        - spi-cpha
+    else:
+      properties:
+        spi-cpha: false
+      required:
+        - spi-cpol
+
 unevaluatedProperties: false
 
 examples:
@@ -120,6 +143,7 @@ examples:
             ethernet-switch@1 {
                     reg = <0x1>;
                     compatible = "nxp,sja1105t";
+                    spi-cpha;
 
                     ethernet-ports {
                             #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 4f574532ee13c..c1241c8a3b779 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -93,6 +93,12 @@ properties:
       the turn around line low at end of the control phase of the
       MDIO transaction.
 
+  clocks:
+    maxItems: 1
+    description:
+      External clock connected to the PHY. If not specified it is assumed
+      that the PHY uses a fixed crystal or an internal oscillator.
+
   enet-phy-lane-swap:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index d23fa3771210a..42a0bc94312c3 100644
--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -19,7 +19,7 @@ select:
     - compatible
 
 allOf:
-  - $ref: "snps,dwmac.yaml#"
+  - $ref: snps,dwmac.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
index d71fa9de2b64d..8a3713abd1ca9 100644
--- a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
+++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
@@ -17,11 +17,12 @@ properties:
   maxlinear,use-broken-interrupts:
     description: |
       Interrupts are broken on some GPY2xx PHYs in that they keep the
-      interrupt line asserted even after the interrupt status register is
-      cleared. Thus it is blocking the interrupt line which is usually bad
-      for shared lines. By default interrupts are disabled for this PHY and
-      polling mode is used. If one can live with the consequences, this
-      property can be used to enable interrupt handling.
+      interrupt line asserted for a random amount of time even after the
+      interrupt status register is cleared. Thus it is blocking the
+      interrupt line which is usually bad for shared lines. By default,
+      interrupts are disabled for this PHY and polling mode is used. If one
+      can live with the consequences, this property can be used to enable
+      interrupt handling.
 
       Affected PHYs (as far as known) are GPY215B and GPY215C.
     type: boolean
diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml
index acb2b2ac4fe1e..31cc0c412805c 100644
--- a/Documentation/devicetree/bindings/net/mediatek,net.yaml
+++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -293,7 +293,7 @@ allOf:
 patternProperties:
   "^mac@[0-1]$":
     type: object
-    additionalProperties: false
+    unevaluatedProperties: false
     allOf:
       - $ref: ethernet-controller.yaml#
     description:
@@ -305,14 +305,9 @@ patternProperties:
       reg:
         maxItems: 1
 
-      phy-handle: true
-
-      phy-mode: true
-
     required:
       - reg
       - compatible
-      - phy-handle
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
index 0fa2132fa4f4d..5aa320c8af5aa 100644
--- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
@@ -25,7 +25,7 @@ select:
     - compatible
 
 allOf:
-  - $ref: "snps,dwmac.yaml#"
+  - $ref: snps,dwmac.yaml#
 
 properties:
   compatible:
@@ -156,7 +156,7 @@ examples:
         reg = <0x1101c000 0x1300>;
         interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
         interrupt-names = "macirq";
-        phy-mode ="rgmii-rxid";
+        phy-mode = "rgmii-rxid";
         mac-address = [00 55 7b b5 7d f7];
         clock-names = "axi",
                       "apb",
diff --git a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml
index b44d83554ef57..b726c6e146333 100644
--- a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml
+++ b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml
@@ -44,13 +44,13 @@ required:
 
 allOf:
   - $ref: ethernet-controller.yaml#
-  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
   - if:
       properties:
         compatible:
           contains:
             const: micrel,ks8851
     then:
+      $ref: /schemas/spi/spi-peripheral-props.yaml#
       properties:
         reg:
           maxItems: 1
@@ -60,6 +60,7 @@ allOf:
           contains:
             const: micrel,ks8851-mll
     then:
+      $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
       properties:
         reg:
           minItems: 2
diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
index 63409cbff5ad1..4c01cae7c93a7 100644
--- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -24,7 +24,7 @@ select:
     - compatible
 
 allOf:
-  - $ref: "snps,dwmac.yaml#"
+  - $ref: snps,dwmac.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
index b110abb42597e..2d382faca0e6d 100644
--- a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
+++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
@@ -16,7 +16,7 @@ maintainers:
 
 properties:
   $nodename:
-    pattern: "^ethernet-pse(@.*)?$"
+    pattern: "^ethernet-pse(@.*|-([0-9]|[1-9][0-9]+))?$"
 
   "#pse-cells":
     description:
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
index 60a38044fb199..7bdb412a01855 100644
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
@@ -20,6 +20,7 @@ properties:
   compatible:
     enum:
       - qcom,qcs404-ethqos
+      - qcom,sa8775p-ethqos
       - qcom,sc8280xp-ethqos
       - qcom,sm8150-ethqos
 
@@ -32,11 +33,13 @@ properties:
       - const: rgmii
 
   interrupts:
+    minItems: 1
     items:
       - description: Combined signal for various interrupt events
       - description: The interrupt that occurs when Rx exits the LPI state
 
   interrupt-names:
+    minItems: 1
     items:
       - const: macirq
       - const: eth_lpi
@@ -49,11 +52,18 @@ properties:
       - const: stmmaceth
       - const: pclk
       - const: ptp_ref
-      - const: rgmii
+      - enum:
+          - rgmii
+          - phyaux
 
   iommus:
     maxItems: 1
 
+  phys: true
+
+  phy-names:
+    const: serdes
+
 required:
   - compatible
   - clocks
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
index 2a21bbe028921..7f324c6da915d 100644
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
@@ -32,7 +32,7 @@ select:
     - compatible
 
 allOf:
-  - $ref: "snps,dwmac.yaml#"
+  - $ref: snps,dwmac.yaml#
 
 properties:
   compatible:
@@ -91,12 +91,18 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
 
   tx_delay:
-    description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
+    description: Delay value for TXD timing.
     $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x7F
+    default: 0x30
 
   rx_delay:
-    description: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default.
+    description: Delay value for RXD timing.
     $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x7F
+    default: 0x10
 
   phy-supply:
     description: PHY regulator
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 363b3e3ea3a60..ddf9522a5dc23 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -67,6 +67,7 @@ properties:
         - loongson,ls2k-dwmac
         - loongson,ls7a-dwmac
         - qcom,qcs404-ethqos
+        - qcom,sa8775p-ethqos
         - qcom,sc8280xp-ethqos
         - qcom,sm8150-ethqos
         - renesas,r9a06g032-gmac
@@ -582,6 +583,7 @@ allOf:
               - ingenic,x1600-mac
               - ingenic,x1830-mac
               - ingenic,x2000-mac
+              - qcom,sa8775p-ethqos
               - qcom,sc8280xp-ethqos
               - snps,dwmac-3.50a
               - snps,dwmac-4.10a
@@ -638,6 +640,7 @@ allOf:
               - ingenic,x1830-mac
               - ingenic,x2000-mac
               - qcom,qcs404-ethqos
+              - qcom,sa8775p-ethqos
               - qcom,sc8280xp-ethqos
               - qcom,sm8150-ethqos
               - snps,dwmac-4.00
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index 395a4650e2852..c9c25132d1544 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -168,14 +168,14 @@ properties:
 patternProperties:
   "^mdio@[0-9a-f]+$":
     type: object
-    $ref: "ti,davinci-mdio.yaml#"
+    $ref: ti,davinci-mdio.yaml#
 
     description:
       CPSW MDIO bus.
 
   "^cpts@[0-9a-f]+":
     type: object
-    $ref: "ti,k3-am654-cpts.yaml#"
+    $ref: ti,k3-am654-cpts.yaml#
     description:
       CPSW Common Platform Time Sync (CPTS) module.
 
diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
index 474fa8bcf302c..052f636158b3f 100644
--- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
@@ -19,7 +19,7 @@ select:
     - compatible
 
 allOf:
-  - $ref: "snps,dwmac.yaml#"
+  - $ref: snps,dwmac.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
index fec1cc9b9a085..4aa521f1be8cd 100644
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -15,6 +15,9 @@ description:
   These chips also have a Bluetooth portion described in a separate
   binding.
 
+allOf:
+  - $ref: ieee80211.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -38,6 +41,7 @@ properties:
               - brcm,bcm4354-fmac
               - brcm,bcm4356-fmac
               - brcm,bcm4359-fmac
+              - brcm,bcm4366-fmac
               - cypress,cyw4373-fmac
               - cypress,cyw43012-fmac
           - const: brcm,bcm4329-fmac
@@ -120,7 +124,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
index c85ed330426d4..7758a55dd3286 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
@@ -84,6 +84,8 @@ properties:
     required:
       - iommus
 
+  ieee80211-freq-limit: true
+
   qcom,ath10k-calibration-data:
     $ref: /schemas/types.yaml#/definitions/uint8-array
     description:
@@ -164,6 +166,7 @@ required:
 additionalProperties: false
 
 allOf:
+  - $ref: ieee80211.yaml#
   - if:
       properties:
         compatible:
@@ -355,4 +358,5 @@ examples:
                            "msi14",
                            "msi15",
                            "legacy";
+        ieee80211-freq-limit = <5470000 5875000>;
       };
diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
deleted file mode 100644
index 80e505a2fda16..0000000000000
--- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-XILINX AXI ETHERNET Device Tree Bindings
---------------------------------------------------------
-
-Also called  AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core
-provides connectivity to an external ethernet PHY supporting different
-interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two
-segments of memory for buffering TX and RX, as well as the capability of
-offloading TX/RX checksum calculation off the processor.
-
-Management configuration is done through the AXI interface, while payload is
-sent and received through means of an AXI DMA controller. This driver
-includes the DMA driver code, so this driver is incompatible with AXI DMA
-driver.
-
-For more details about mdio please refer phy.txt file in the same directory.
-
-Required properties:
-- compatible	: Must be one of "xlnx,axi-ethernet-1.00.a",
-		  "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a"
-- reg		: Address and length of the IO space, as well as the address
-                  and length of the AXI DMA controller IO space, unless
-                  axistream-connected is specified, in which case the reg
-                  attribute of the node referenced by it is used.
-- interrupts	: Should be a list of 2 or 3 interrupts: TX DMA, RX DMA,
-		  and optionally Ethernet core. If axistream-connected is
-		  specified, the TX/RX DMA interrupts should be on that node
-		  instead, and only the Ethernet core interrupt is optionally
-		  specified here.
-- phy-handle	: Should point to the external phy device if exists. Pointing
-		  this to the PCS/PMA PHY is deprecated and should be avoided.
-		  See ethernet.txt file in the same directory.
-- xlnx,rxmem	: Set to allocated memory buffer for Rx/Tx in the hardware
-
-Optional properties:
-- phy-mode	: See ethernet.txt
-- xlnx,phy-type	: Deprecated, do not use, but still accepted in preference
-		  to phy-mode.
-- xlnx,txcsum	: 0 or empty for disabling TX checksum offload,
-		  1 to enable partial TX checksum offload,
-		  2 to enable full TX checksum offload
-- xlnx,rxcsum	: Same values as xlnx,txcsum but for RX checksum offload
-- xlnx,switch-x-sgmii : Boolean to indicate the Ethernet core is configured to
-		  support both 1000BaseX and SGMII modes. If set, the phy-mode
-		  should be set to match the mode selected on core reset (i.e.
-		  by the basex_or_sgmii core input line).
-- clock-names: 	  Tuple listing input clock names. Possible clocks:
-		  s_axi_lite_clk: Clock for AXI register slave interface
-		  axis_clk: AXI4-Stream clock for TXD RXD TXC and RXS interfaces
-		  ref_clk: Ethernet reference clock, used by signal delay
-			   primitives and transceivers
-		  mgt_clk: MGT reference clock (used by optional internal
-			   PCS/PMA PHY)
-
-		  Note that if s_axi_lite_clk is not specified by name, the
-		  first clock of any name is used for this. If that is also not
-		  specified, the clock rate is auto-detected from the CPU clock
-		  (but only on platforms where this is possible). New device
-		  trees should specify all applicable clocks by name - the
-		  fallbacks to an unnamed clock or to CPU clock are only for
-		  backward compatibility.
-- clocks: 	  Phandles to input clocks matching clock-names. Refer to common
-		  clock bindings.
-- axistream-connected: Reference to another node which contains the resources
-		       for the AXI DMA controller used by this device.
-		       If this is specified, the DMA-related resources from that
-		       device (DMA registers and DMA TX/RX interrupts) rather
-		       than this one will be used.
- - mdio		: Child node for MDIO bus. Must be defined if PHY access is
-		  required through the core's MDIO interface (i.e. always,
-		  unless the PHY is accessed through a different bus).
-		  Non-standard MDIO bus frequency is supported via
-		  "clock-frequency", see mdio.yaml.
-
- - pcs-handle: 	  Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X
-		  modes, where "pcs-handle" should be used to point
-		  to the PCS/PMA PHY, and "phy-handle" should point to an
-		  external PHY if exists.
-
-Example:
-	axi_ethernet_eth: ethernet@40c00000 {
-		compatible = "xlnx,axi-ethernet-1.00.a";
-		device_type = "network";
-		interrupt-parent = <&microblaze_0_axi_intc>;
-		interrupts = <2 0 1>;
-		clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk";
-		clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
-		phy-mode = "mii";
-		reg = <0x40c00000 0x40000 0x50c00000 0x40000>;
-		xlnx,rxcsum = <0x2>;
-		xlnx,rxmem = <0x800>;
-		xlnx,txcsum = <0x2>;
-		phy-handle = <&phy0>;
-		axi_ethernetlite_0_mdio: mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy0: phy@0 {
-				device_type = "ethernet-phy";
-				reg = <1>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
new file mode 100644
index 0000000000000..1d33d80af11c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/xlnx,axi-ethernet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXI 1G/2.5G Ethernet Subsystem
+
+description: |
+  Also called  AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core
+  provides connectivity to an external ethernet PHY supporting different
+  interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two
+  segments of memory for buffering TX and RX, as well as the capability of
+  offloading TX/RX checksum calculation off the processor.
+
+  Management configuration is done through the AXI interface, while payload is
+  sent and received through means of an AXI DMA controller. This driver
+  includes the DMA driver code, so this driver is incompatible with AXI DMA
+  driver.
+
+maintainers:
+  - Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,axi-ethernet-1.00.a
+      - xlnx,axi-ethernet-1.01.a
+      - xlnx,axi-ethernet-2.01.a
+
+  reg:
+    description:
+      Address and length of the IO space, as well as the address
+      and length of the AXI DMA controller IO space, unless
+      axistream-connected is specified, in which case the reg
+      attribute of the node referenced by it is used.
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: Ethernet core interrupt
+      - description: Tx DMA interrupt
+      - description: Rx DMA interrupt
+    description:
+      Ethernet core interrupt is optional. If axistream-connected property is
+      present DMA node should contains TX/RX DMA interrupts else DMA interrupt
+      resources are mentioned on ethernet node.
+    minItems: 1
+
+  phy-handle: true
+
+  xlnx,rxmem:
+    description:
+      Set to allocated memory buffer for Rx/Tx in the hardware.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  phy-mode:
+    enum:
+      - mii
+      - gmii
+      - rgmii
+      - sgmii
+      - 1000BaseX
+
+  xlnx,phy-type:
+    description:
+      Do not use, but still accepted in preference to phy-mode.
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  xlnx,txcsum:
+    description:
+      TX checksum offload. 0 or empty for disabling TX checksum offload,
+      1 to enable partial TX checksum offload and 2 to enable full TX
+      checksum offload.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  xlnx,rxcsum:
+    description:
+      RX checksum offload. 0 or empty for disabling RX checksum offload,
+      1 to enable partial RX checksum offload and 2 to enable full RX
+      checksum offload.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  xlnx,switch-x-sgmii:
+    type: boolean
+    description:
+      Indicate the Ethernet core is configured to support both 1000BaseX and
+      SGMII modes. If set, the phy-mode should be set to match the mode
+      selected on core reset (i.e. by the basex_or_sgmii core input line).
+
+  clocks:
+    items:
+      - description: Clock for AXI register slave interface.
+      - description: AXI4-Stream clock for TXD RXD TXC and RXS interfaces.
+      - description: Ethernet reference clock, used by signal delay primitives
+                     and transceivers.
+      - description: MGT reference clock (used by optional internal PCS/PMA PHY)
+
+  clock-names:
+    items:
+      - const: s_axi_lite_clk
+      - const: axis_clk
+      - const: ref_clk
+      - const: mgt_clk
+
+  axistream-connected:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle of AXI DMA controller which contains the resources
+      used by this device. If this is specified, the DMA-related resources
+      from that device (DMA registers and DMA TX/RX interrupts) rather than
+      this one will be used.
+
+  mdio:
+    type: object
+
+  pcs-handle:
+    description: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X
+      modes, where "pcs-handle" should be used to point to the PCS/PMA PHY,
+      and "phy-handle" should point to an external PHY if exists.
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - xlnx,rxmem
+  - phy-handle
+
+allOf:
+  - $ref: /schemas/net/ethernet-controller.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    axi_ethernet_eth: ethernet@40c00000 {
+        compatible = "xlnx,axi-ethernet-1.00.a";
+        interrupts = <2 0 1>;
+        clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk";
+        clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
+        phy-mode = "mii";
+        reg = <0x40c00000 0x40000>,<0x50c00000 0x40000>;
+        xlnx,rxcsum = <0x2>;
+        xlnx,rxmem = <0x800>;
+        xlnx,txcsum = <0x2>;
+        phy-handle = <&phy0>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy0: ethernet-phy@1 {
+                device_type = "ethernet-phy";
+                reg = <1>;
+            };
+        };
+    };
+
+  - |
+    axi_ethernet_eth1: ethernet@40000000 {
+        compatible = "xlnx,axi-ethernet-1.00.a";
+        interrupts = <0>;
+        clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk";
+        clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
+        phy-mode = "mii";
+        reg = <0x00 0x40000000 0x00 0x40000>;
+        xlnx,rxcsum = <0x2>;
+        xlnx,rxmem = <0x800>;
+        xlnx,txcsum = <0x2>;
+        phy-handle = <&phy1>;
+        axistream-connected = <&dma>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy1: ethernet-phy@1 {
+                device_type = "ethernet-phy";
+                reg = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
index 36def7128fca8..13412af7f0466 100644
--- a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
+++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
@@ -36,14 +36,29 @@ properties:
   et0macaddr:
     type: object
     description: First Ethernet interface's MAC address
+    properties:
+      "#nvmem-cell-cells":
+        description: The first argument is a MAC address offset.
+        const: 1
+    additionalProperties: false
 
   et1macaddr:
     type: object
     description: Second Ethernet interface's MAC address
+    properties:
+      "#nvmem-cell-cells":
+        description: The first argument is a MAC address offset.
+        const: 1
+    additionalProperties: false
 
   et2macaddr:
     type: object
     description: Third Ethernet interface's MAC address
+    properties:
+      "#nvmem-cell-cells":
+        description: The first argument is a MAC address offset.
+        const: 1
+    additionalProperties: false
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
index 9876243ff1e85..99e60d713dace 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/imx-ocotp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX6 On-Chip OTP Controller (OCOTP)
+title: Freescale i.MX On-Chip OTP Controller (OCOTP)
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
@@ -12,7 +12,7 @@ maintainers:
 description: |
   This binding represents the on-chip eFuse OTP controller found on
   i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL,
-  i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs.
+  i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93 SoCs.
 
 allOf:
   - $ref: nvmem.yaml#
@@ -32,6 +32,7 @@ properties:
               - fsl,imx7ulp-ocotp
               - fsl,imx8mq-ocotp
               - fsl,imx8mm-ocotp
+              - fsl,imx93-ocotp
           - const: syscon
       - items:
           - enum:
@@ -46,12 +47,6 @@ properties:
   reg:
     maxItems: 1
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 1
-
   clocks:
     maxItems: 1
 
@@ -61,21 +56,6 @@ required:
   - compatible
   - reg
 
-patternProperties:
-  "^.*@[0-9a-f]+$":
-    type: object
-
-    properties:
-      reg:
-        maxItems: 1
-        description:
-          Offset and size in bytes within the storage device.
-
-    required:
-      - reg
-
-    additionalProperties: false
-
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
new file mode 100644
index 0000000000000..e698098450e11
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/fixed-cell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fixed offset & size NVMEM cell
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  reg:
+    maxItems: 1
+
+  bits:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - minimum: 0
+        maximum: 7
+        description:
+          Offset in bit within the address range specified by reg.
+      - minimum: 1
+        description:
+          Size in bit within the address range specified by reg.
+
+required:
+  - reg
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml
new file mode 100644
index 0000000000000..c271537d0714f
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/fixed-layout.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM layout for fixed NVMEM cells
+
+description:
+  Many NVMEM devices have hardcoded cells layout (offset and size of defined
+  NVMEM content doesn't change).
+
+  This binding allows defining such NVMEM layout with its cells. It can be used
+  on top of any NVMEM device.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: fixed-layout
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "@[a-f0-9]+$":
+    type: object
+    $ref: fixed-cell.yaml
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    nvmem-layout {
+        compatible = "fixed-layout";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        calibration@4000 {
+            reg = <0x4000 0x100>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
index 8512ee538c4c1..3b40f78807746 100644
--- a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
+++ b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
@@ -18,16 +18,13 @@ description: |
   perform their parsing. The nvmem-layout container is here to describe these.
 
 oneOf:
+  - $ref: fixed-layout.yaml
   - $ref: kontron,sl28-vpd.yaml
   - $ref: onie,tlv-layout.yaml
 
 properties:
   compatible: true
 
-  '#address-cells': false
-
-  '#size-cells': false
-
 required:
   - compatible
 
diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
index d16d42fb98b6a..7ec2988b597e8 100644
--- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
@@ -27,6 +27,7 @@ properties:
           - enum:
               - mediatek,mt7622-efuse
               - mediatek,mt7623-efuse
+              - mediatek,mt7986-efuse
               - mediatek,mt8173-efuse
               - mediatek,mt8183-efuse
               - mediatek,mt8186-efuse
diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
index 8938eec22b52d..a9b822aeaa7ed 100644
--- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
@@ -18,12 +18,6 @@ properties:
       - fsl,imx23-ocotp
       - fsl,imx28-ocotp
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 1
-
   reg:
     maxItems: 1
 
@@ -35,7 +29,7 @@ required:
   - reg
   - clocks
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
index 75bb93dda9df1..9802441006906 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -49,23 +49,8 @@ properties:
 patternProperties:
   "@[0-9a-f]+(,[0-7])?$":
     type: object
-
-    properties:
-      reg:
-        maxItems: 1
-        description:
-          Offset and size in bytes within the storage device.
-
-      bits:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        items:
-          - minimum: 0
-            maximum: 7
-            description:
-              Offset in bit within the address range specified by reg.
-          - minimum: 1
-            description:
-              Size in bit within the address range specified by reg.
+    $ref: layouts/fixed-cell.yaml
+    deprecated: true
 
 additionalProperties: true
 
@@ -83,24 +68,30 @@ examples:
 
           /* ... */
 
-          /* Data cells */
-          tsens_calibration: calib@404 {
-              reg = <0x404 0x10>;
-          };
-
-          tsens_calibration_bckp: calib_bckp@504 {
-              reg = <0x504 0x11>;
-              bits = <6 128>;
-          };
-
-          pvs_version: pvs-version@6 {
-              reg = <0x6 0x2>;
-              bits = <7 2>;
-          };
-
-          speed_bin: speed-bin@c{
-              reg = <0xc 0x1>;
-              bits = <2 3>;
+          nvmem-layout {
+              compatible = "fixed-layout";
+              #address-cells = <1>;
+              #size-cells = <1>;
+
+              /* Data cells */
+              tsens_calibration: calib@404 {
+                  reg = <0x404 0x10>;
+              };
+
+              tsens_calibration_bckp: calib_bckp@504 {
+                  reg = <0x504 0x11>;
+                  bits = <6 128>;
+              };
+
+              pvs_version: pvs-version@6 {
+                  reg = <0x6 0x2>;
+                  bits = <7 2>;
+              };
+
+              speed_bin: speed-bin@c{
+                  reg = <0xc 0x1>;
+                  bits = <2 3>;
+              };
           };
       };
 
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index 8d8503dd934b8..6cd4682a167dd 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -18,8 +18,11 @@ properties:
       - enum:
           - qcom,apq8064-qfprom
           - qcom,apq8084-qfprom
+          - qcom,ipq5332-qfprom
+          - qcom,ipq6018-qfprom
           - qcom,ipq8064-qfprom
           - qcom,ipq8074-qfprom
+          - qcom,ipq9574-qfprom
           - qcom,msm8916-qfprom
           - qcom,msm8974-qfprom
           - qcom,msm8976-qfprom
@@ -64,12 +67,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  # Needed if any child nodes are present.
-  "#address-cells":
-    const: 1
-  "#size-cells":
-    const: 1
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
index dce0c7d84ce76..cd980def97b8c 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
@@ -25,12 +25,6 @@ properties:
   reg:
     maxItems: 1
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 1
-
   ranges: true
 
 required:
diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml
index 38a39c9b8c1ce..1ec0d09bcafa8 100644
--- a/Documentation/devicetree/bindings/nvmem/rmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml
@@ -17,6 +17,7 @@ properties:
     items:
       - enum:
           - raspberrypi,bootloader-config
+          - raspberrypi,bootloader-public-key
       - const: nvmem-rmem
 
   reg:
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
new file mode 100644
index 0000000000000..9c6eff7889282
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/rockchip,otp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip internal OTP (One Time Programmable) memory
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-otp
+      - rockchip,rk3308-otp
+      - rockchip,rk3588-otp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: otp
+      - const: apb_pclk
+      - const: phy
+      - const: arb
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names:
+    minItems: 1
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: nvmem.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-otp
+              - rockchip,rk3308-otp
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: phy
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3588-otp
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: otp
+            - const: apb
+            - const: arb
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        otp: efuse@ff290000 {
+            compatible = "rockchip,px30-otp";
+            reg = <0x0 0xff290000 0x0 0x4000>;
+            clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>,
+                     <&cru PCLK_OTP_PHY>;
+            clock-names = "otp", "apb_pclk", "phy";
+            resets = <&cru SRST_OTP_PHY>;
+            reset-names = "phy";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            cpu_id: id@7 {
+                reg = <0x07 0x10>;
+            };
+
+            cpu_leakage: cpu-leakage@17 {
+                reg = <0x17 0x1>;
+            };
+
+            performance: performance@1e {
+                reg = <0x1e 0x1>;
+                bits = <4 3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt b/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt
deleted file mode 100644
index 40f649f7c2e5e..0000000000000
--- a/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Rockchip internal OTP (One Time Programmable) memory device tree bindings
-
-Required properties:
-- compatible: Should be one of the following.
-  - "rockchip,px30-otp" - for PX30 SoCs.
-  - "rockchip,rk3308-otp" - for RK3308 SoCs.
-- reg: Should contain the registers location and size
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Should be "otp", "apb_pclk" and "phy".
-- resets: Must contain an entry for each entry in reset-names.
-  See ../../reset/reset.txt for details.
-- reset-names: Should be "phy".
-
-See nvmem.txt for more information.
-
-Example:
-	otp: otp@ff290000 {
-		compatible = "rockchip,px30-otp";
-		reg = <0x0 0xff290000 0x0 0x4000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>,
-			 <&cru PCLK_OTP_PHY>;
-		clock-names = "otp", "apb_pclk", "phy";
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
index b8bca0599c452..efccc5aacbe0c 100644
--- a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
@@ -14,9 +14,6 @@ allOf:
   - $ref: nvmem.yaml#
 
 properties:
-  "#address-cells": true
-  "#size-cells": true
-
   compatible:
     const: socionext,uniphier-efuse
 
diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
index 8877c2283e9ea..da3f1de7d2817 100644
--- a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
@@ -28,12 +28,6 @@ properties:
   clocks:
     maxItems: 1
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 1
-
   thermal-calibration:
     type: object
     description: thermal calibration values
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
index b3c22ebd156c0..811112255d7d2 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -13,6 +13,7 @@ properties:
   compatible:
     enum:
       - qcom,sdx55-pcie-ep
+      - qcom,sdx65-pcie-ep
       - qcom,sm8450-pcie-ep
 
   reg:
@@ -109,6 +110,7 @@ allOf:
           contains:
             enum:
               - qcom,sdx55-pcie-ep
+              - qcom,sdx65-pcie-ep
     then:
       properties:
         clocks:
diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
index 88386a6d70119..6b62f6f58efec 100644
--- a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
@@ -47,7 +47,7 @@ examples:
 
         pcie-ep@f8000000 {
             compatible = "rockchip,rk3399-pcie-ep";
-            reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>;
+            reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0xfa000000 0x0 0x2000000>;
             reg-names = "apb-base", "mem-base";
             clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
               <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
@@ -63,6 +63,8 @@ examples:
             phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
             phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
             rockchip,max-outbound-regions = <16>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pcie_clkreqnb_cpm>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
index 24c88942e59e0..a4f61ced5e885 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -41,20 +41,24 @@ properties:
       - const: config
 
   clocks:
+    minItems: 5
     items:
       - description: AHB clock for PCIe master
       - description: AHB clock for PCIe slave
       - description: AHB clock for PCIe dbi
       - description: APB clock for PCIe
       - description: Auxiliary clock for PCIe
+      - description: PIPE clock
 
   clock-names:
+    minItems: 5
     items:
       - const: aclk_mst
       - const: aclk_slv
       - const: aclk_dbi
       - const: pclk
       - const: aux
+      - const: pipe
 
   msi-map: true
 
@@ -70,13 +74,19 @@ properties:
     maxItems: 1
 
   ranges:
-    maxItems: 2
+    minItems: 2
+    maxItems: 3
 
   resets:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   reset-names:
-    const: pipe
+    oneOf:
+      - const: pipe
+      - items:
+          - const: pwr
+          - const: pipe
 
   vpcie3v3-supply: true
 
diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
index 24ddc2855b946..4734be456bde6 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: CPM Host Controller device tree for Xilinx Versal SoCs
 
 maintainers:
-  - Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
+  - Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
 
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
index 50f46a6898b1e..4adab01491082 100644
--- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
+++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
@@ -42,8 +42,8 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     pmu {
-        #address-cells=<2>;
-        #size-cells=<2>;
+        #address-cells = <2>;
+        #size-cells = <2>;
 
         pmu@ff638000 {
             compatible = "amlogic,g12a-ddr-pmu";
diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
index 80a92385367ee..e9fad4b3de684 100644
--- a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
+++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/perf/fsl-imx-ddr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale(NXP) IMX8 DDR performance monitor
+title: Freescale(NXP) IMX8/9 DDR performance monitor
 
 maintainers:
   - Frank Li <frank.li@nxp.com>
@@ -19,6 +19,7 @@ properties:
           - fsl,imx8mm-ddr-pmu
           - fsl,imx8mn-ddr-pmu
           - fsl,imx8mp-ddr-pmu
+          - fsl,imx93-ddr-pmu
       - items:
           - enum:
               - fsl,imx8mm-ddr-pmu
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
index 43a4b880534c8..580fbe37b37fa 100644
--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
@@ -115,8 +115,8 @@ allOf:
         compatible:
           contains:
             enum:
-              - const: brcm,bcm4908-usb-phy
-              - const: brcm,brcmstb-usb-phy
+              - brcm,bcm4908-usb-phy
+              - brcm,brcmstb-usb-phy
     then:
       properties:
         reg:
diff --git a/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt
deleted file mode 100644
index 3dc8b3d2ffbbe..0000000000000
--- a/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-BROADCOM KONA USB2 PHY
-
-Required properties:
- - compatible: brcm,kona-usb2-phy
- - reg: offset and length of the PHY registers
- - #phy-cells: must be 0
-Refer to phy/phy-bindings.txt for the generic PHY binding properties
-
-Example:
-
-	usbphy: usb-phy@3f130000 {
-		compatible = "brcm,kona-usb2-phy";
-		reg = <0x3f130000 0x28>;
-		#phy-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml
new file mode 100644
index 0000000000000..d7faeb81f7a76
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,kona-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family USB 2.0 PHY
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,kona-usb2-phy
+
+  reg:
+    maxItems: 1
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@3f130000 {
+        compatible = "brcm,kona-usb2-phy";
+        reg = <0x3f130000 0x28>;
+        #phy-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
index c9e65a2facd55..c7281a7c82445 100644
--- a/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
@@ -31,6 +31,12 @@ properties:
   "#phy-cells":
     const: 0
 
+  cdns,usb2-disconnect-threshold-microvolt:
+    description: The microvolt threshold value utilized for detecting
+      USB disconnection event.
+    enum: [575, 610, 645]
+    default: 575
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
index e6f9f5540cc3f..dc3a3f709feaa 100644
--- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
@@ -35,6 +35,53 @@ properties:
     description:
       A phandle to the regulator for USB VBUS.
 
+  fsl,phy-tx-vref-tune-percent:
+    description:
+      Tunes the HS DC level relative to the nominal level
+    minimum: 94
+    maximum: 124
+
+  fsl,phy-tx-rise-tune-percent:
+    description:
+      Adjusts the rise/fall time duration of the HS waveform relative to
+      its nominal value
+    minimum: 97
+    maximum: 103
+
+  fsl,phy-tx-preemp-amp-tune-microamp:
+    description:
+      Adjust amount of current sourced to DPn and DMn after a J-to-K
+      or K-to-J transition. Default is 0 (disabled).
+    minimum: 0
+    maximum: 1800
+
+  fsl,phy-tx-vboost-level-microvolt:
+    description:
+      Adjust the boosted transmit launch pk-pk differential amplitude
+    minimum: 880
+    maximum: 1120
+
+  fsl,phy-comp-dis-tune-percent:
+    description:
+      Adjust the voltage level used to detect a disconnect event at the host
+      relative to the nominal value
+    minimum: 91
+    maximum: 115
+
+  fsl,phy-pcs-tx-deemph-3p5db-attenuation-db:
+    description:
+      Adjust TX de-emphasis attenuation in dB at nominal
+      3.5dB point as per USB specification
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 36
+
+  fsl,phy-pcs-tx-swing-full-percent:
+    description:
+      Scaling of the voltage defined by fsl,phy-tx-vboost-level-microvolt
+    minimum: 0
+    maximum: 100
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
new file mode 100644
index 0000000000000..f4b1ca2fb5625
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS USB Phy Device
+
+maintainers:
+  - Xu Yang <xu.yang_2@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx23-usbphy
+          - fsl,imx7ulp-usbphy
+          - fsl,vf610-usbphy
+      - items:
+          - enum:
+              - fsl,imx28-usbphy
+              - fsl,imx6ul-usbphy
+              - fsl,imx6sl-usbphy
+              - fsl,imx6sx-usbphy
+              - fsl,imx6q-usbphy
+          - const: fsl,imx23-usbphy
+      - items:
+          - const: fsl,imx6sll-usbphy
+          - const: fsl,imx6ul-usbphy
+          - const: fsl,imx23-usbphy
+      - items:
+          - enum:
+              - fsl,imx8dxl-usbphy
+              - fsl,imx8qm-usbphy
+              - fsl,imx8ulp-usbphy
+          - const: fsl,imx7ulp-usbphy
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#phy-cells':
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  fsl,anatop:
+    description:
+      phandle for anatop register, it is only for imx6 SoC series.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  phy-3p0-supply:
+    description:
+      One of USB PHY's power supply. Can be used to keep a good signal
+      quality.
+
+  fsl,tx-cal-45-dn-ohms:
+    description:
+      Resistance (in ohms) of switchable high-speed trimming resistor
+      connected in parallel with the 45 ohm resistor that terminates
+      the DN output signal.
+    minimum: 35
+    maximum: 54
+    default: 45
+
+  fsl,tx-cal-45-dp-ohms:
+    description:
+      Resistance (in ohms) of switchable high-speed trimming resistor
+      connected in parallel with the 45 ohm resistor that terminates
+      the DP output signal.
+    minimum: 35
+    maximum: 54
+    default: 45
+
+  fsl,tx-d-cal:
+    description:
+      Current trimming value (as a percentage) of the 17.78 mA TX
+      reference current.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 79
+    maximum: 119
+    default: 100
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          oneOf:
+            - enum:
+                - fsl,imx6q-usbphy
+                - fsl,imx6sl-usbphy
+                - fsl,imx6sx-usbphy
+                - fsl,imx6sll-usbphy
+                - fsl,vf610-usbphy
+            - items:
+                - const: fsl,imx6ul-usbphy
+                - const: fsl,imx23-usbphy
+    then:
+      required:
+        - fsl,anatop
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    usbphy1: usb-phy@20c9000 {
+        compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+        reg = <0x020c9000 0x1000>;
+        clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+        fsl,anatop = <&anatop>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
index 5d54b0a0e8739..7dd6a4d94b488 100644
--- a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
@@ -15,7 +15,7 @@ description: |
 
 properties:
   $nodename:
-    pattern: "combophy(@.*|-[0-9a-f])*$"
+    pattern: "combophy(@.*|-([0-9]|[1-9][0-9]+))?$"
 
   compatible:
     items:
diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
index 26f2b887cfc1e..a63b20dfa4a53 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
@@ -24,6 +24,10 @@ properties:
           - enum:
               - mediatek,mt7623-mipi-tx
           - const: mediatek,mt2701-mipi-tx
+      - items:
+          - enum:
+              - mediatek,mt6795-mipi-tx
+          - const: mediatek,mt8173-mipi-tx
       - items:
           - enum:
               - mediatek,mt8365-mipi-tx
@@ -83,7 +87,7 @@ examples:
         clocks = <&clk26m>;
         clock-output-names = "mipi_tx0_pll";
         drive-strength-microamp = <4000>;
-        nvmem-cells= <&mipi_tx_calibration>;
+        nvmem-cells = <&mipi_tx_calibration>;
         nvmem-cell-names = "calibration-data";
         #clock-cells = <0>;
         #phy-cells = <0>;
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
index 786cfd71cb7eb..3c28ec50f0979 100644
--- a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
@@ -32,15 +32,6 @@ properties:
   clock-names:
     const: phy_ref
 
-  assigned-clocks:
-    maxItems: 1
-
-  assigned-clock-parents:
-    maxItems: 1
-
-  assigned-clock-rates:
-    maxItems: 1
-
   "#phy-cells":
     const: 0
 
diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
deleted file mode 100644
index 70c813b0755f9..0000000000000
--- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Freescale MXS USB Phy Device
-
-Required properties:
-- compatible: should contain:
-	* "fsl,imx23-usbphy" for imx23 and imx28
-	* "fsl,imx6q-usbphy" for imx6dq and imx6dl
-	* "fsl,imx6sl-usbphy" for imx6sl
-	* "fsl,vf610-usbphy" for Vybrid vf610
-	* "fsl,imx6sx-usbphy" for imx6sx
-	* "fsl,imx7ulp-usbphy" for imx7ulp
-	* "fsl,imx8dxl-usbphy" for imx8dxl
-  "fsl,imx23-usbphy" is still a fallback for other strings
-- reg: Should contain registers location and length
-- interrupts: Should contain phy interrupt
-- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
-
-Optional properties:
-- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable
-  high-speed trimming resistor connected in parallel with the 45 ohm resistor
-  that terminates the DN output signal. Default: 45
-- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable
-  high-speed trimming resistor connected in parallel with the 45 ohm resistor
-  that terminates the DP output signal. Default: 45
-- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
-  the 17.78mA TX reference current. Default: 100
-
-Example:
-usbphy1: usb-phy@20c9000 {
-	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
-	reg = <0x020c9000 0x1000>;
-	interrupts = <0 44 0x04>;
-	fsl,anatop = <&anatop>;
-};
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
index 9ae514fa75331..d3cd7997879f7 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
@@ -31,8 +31,14 @@ properties:
       - const: pipe
 
   resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
     items:
-      - description: exclusive PHY reset line
+      - const: phy
+      - const: apb
 
   rockchip,enable-ssc:
     type: boolean
@@ -78,6 +84,32 @@ required:
   - rockchip,pipe-phy-grf
   - "#phy-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-naneng-combphy
+    then:
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-naneng-combphy
+    then:
+      properties:
+        resets:
+          minItems: 2
+        reset-names:
+          minItems: 2
+      required:
+        - reset-names
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
index c4f8e6ffa5c32..6566353f1a026 100644
--- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -43,6 +43,9 @@ properties:
   "#phy-cells":
     const: 0
 
+  power-domains:
+    maxItems: 1
+
   vdda-phy-supply: true
   vdda-pll-supply: true
 
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
index 62045dcfb20c5..3d42ee3901a17 100644
--- a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
@@ -203,6 +203,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sc8180x-qmp-pcie-phy
               - qcom,sm8250-qmp-gen3x2-pcie-phy
               - qcom,sm8250-qmp-modem-pcie-phy
               - qcom,sm8450-qmp-gen4x2-pcie-phy
@@ -224,7 +225,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sc8180x-qmp-pcie-phy
               - qcom,sdm845-qmp-pcie-phy
               - qcom,sdx55-qmp-pcie-phy
               - qcom,sm8250-qmp-gen3x1-pcie-phy
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
index 80a5348dbfdec..881ba543fd465 100644
--- a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
@@ -160,6 +160,7 @@ allOf:
           contains:
             enum:
               - qcom,msm8998-qmp-ufs-phy
+              - qcom,sc8180x-qmp-ufs-phy
               - qcom,sdm845-qmp-ufs-phy
               - qcom,sm6350-qmp-ufs-phy
               - qcom,sm8150-qmp-ufs-phy
@@ -178,23 +179,6 @@ allOf:
                 - description: TX lane 2
                 - description: RX lane 2
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc8180x-qmp-ufs-phy
-    then:
-      patternProperties:
-        "^phy@[0-9a-f]+$":
-          properties:
-            reg:
-              items:
-                - description: TX
-                - description: RX
-                - description: PCS
-                - description: PCS_MISC
-
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
index e81a38281f8c5..4c96dab5b9e36 100644
--- a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
@@ -23,14 +23,12 @@ properties:
       - qcom,ipq8074-qmp-usb3-phy
       - qcom,msm8996-qmp-usb3-phy
       - qcom,msm8998-qmp-usb3-phy
-      - qcom,qcm2290-qmp-usb3-phy
       - qcom,sc7180-qmp-usb3-phy
       - qcom,sc8180x-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sdx55-qmp-usb3-uni-phy
       - qcom,sdx65-qmp-usb3-uni-phy
-      - qcom,sm6115-qmp-usb3-phy
       - qcom,sm8150-qmp-usb3-phy
       - qcom,sm8150-qmp-usb3-uni-phy
       - qcom,sm8250-qmp-usb3-phy
@@ -248,29 +246,6 @@ allOf:
             - const: phy
             - const: common
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,qcm2290-qmp-usb3-phy
-              - qcom,sm6115-qmp-usb3-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 3
-        clock-names:
-          items:
-            - const: cfg_ahb
-            - const: ref
-            - const: com_aux
-        resets:
-          maxItems: 2
-        reset-names:
-          items:
-            - const: phy_phy
-            - const: phy
-
   - if:
       properties:
         compatible:
@@ -318,12 +293,10 @@ allOf:
             enum:
               - qcom,ipq6018-qmp-usb3-phy
               - qcom,ipq8074-qmp-usb3-phy
-              - qcom,qcm2290-qmp-usb3-phy
               - qcom,sc7180-qmp-usb3-phy
               - qcom,sc8180x-qmp-usb3-phy
               - qcom,sdx55-qmp-usb3-uni-phy
               - qcom,sdx65-qmp-usb3-uni-phy
-              - qcom,sm6115-qmp-usb3-phy
               - qcom,sm8150-qmp-usb3-uni-phy
               - qcom,sm8250-qmp-usb3-phy
     then:
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index 543c1a2811a57..95eecbaef05c0 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -18,13 +18,14 @@ properties:
     oneOf:
       - items:
           - enum:
+              - qcom,ipq6018-qusb2-phy
               - qcom,ipq8074-qusb2-phy
+              - qcom,ipq9574-qusb2-phy
               - qcom,msm8953-qusb2-phy
               - qcom,msm8996-qusb2-phy
               - qcom,msm8998-qusb2-phy
               - qcom,qcm2290-qusb2-phy
               - qcom,sdm660-qusb2-phy
-              - qcom,ipq6018-qusb2-phy
               - qcom,sm4250-qusb2-phy
               - qcom,sm6115-qusb2-phy
       - items:
diff --git a/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
new file mode 100644
index 0000000000000..b9107759b2a51
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SerDes/SGMII ethernet PHY controller
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+  The SerDes PHY sits between the MAC and the external PHY and provides
+  separate Rx Tx lines.
+
+properties:
+  compatible:
+    const: qcom,sa8775p-dwmac-sgmii-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: sgmi_ref
+
+  phy-supply:
+    description:
+      Phandle to a regulator that provides power to the PHY.
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    serdes_phy: phy@8901000 {
+        compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+        reg = <0x08901000 0xe10>;
+        clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+        clock-names = "sgmi_ref";
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
index 0ef2c9b9d4669..d307343388888 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
@@ -61,6 +61,10 @@ properties:
   power-domains:
     maxItems: 1
 
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
   resets:
     items:
       - description: reset of phy block.
@@ -251,6 +255,8 @@ examples:
         vdda-phy-supply = <&vdda_usb2_ss_1p2>;
         vdda-pll-supply = <&vdda_usb2_ss_core>;
 
+        orientation-switch;
+
         usb3-phy@200 {
             reg = <0x200 0x128>,
                   <0x400 0x200>,
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index 94c0fab065a8b..a1897a7606df4 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -78,9 +78,9 @@ allOf:
     then:
       properties:
         clocks:
-          maxItems: 3
+          minItems: 3
         clock-names:
-          maxItems: 3
+          minItems: 3
     else:
       properties:
         clocks:
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index 16fce10382852..f99fbbcd68fba 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -16,7 +16,11 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,ipq9574-qmp-usb3-phy
+      - qcom,qcm2290-qmp-usb3-phy
+      - qcom,sa8775p-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
+      - qcom,sm6115-qmp-usb3-phy
 
   reg:
     maxItems: 1
@@ -25,11 +29,7 @@ properties:
     maxItems: 4
 
   clock-names:
-    items:
-      - const: aux
-      - const: ref
-      - const: com_aux
-      - const: pipe
+    maxItems: 4
 
   power-domains:
     maxItems: 1
@@ -60,7 +60,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
@@ -69,6 +68,60 @@ required:
   - clock-output-names
   - "#phy-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq9574-qmp-usb3-phy
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: aux
+            - const: ref
+            - const: cfg_ahb
+            - const: pipe
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qmp-usb3-phy
+              - qcom,sm6115-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+            - const: pipe
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-qmp-usb3-uni-phy
+              - qcom,sc8280xp-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: ref
+            - const: com_aux
+            - const: pipe
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index 3cd5fc3e8fab8..ef1c02d8ac88e 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -60,6 +60,26 @@ properties:
     description:
       See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
 
+  orientation-switch:
+    description:
+      Flag the PHY as possible handler of USB Type-C orientation switching
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the PHY
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Incoming endpoint from the USB controller
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Incoming endpoint from the DisplayPort controller
+
 required:
   - compatible
   - reg
@@ -98,6 +118,37 @@ examples:
       vdda-phy-supply = <&vreg_l9d>;
       vdda-pll-supply = <&vreg_l4d>;
 
+      orientation-switch;
+
       #clock-cells = <1>;
       #phy-cells = <1>;
+
+      ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+              reg = <0>;
+
+              endpoint {
+                  remote-endpoint = <&typec_connector_ss>;
+              };
+          };
+
+          port@1 {
+              reg = <1>;
+
+              endpoint {
+                  remote-endpoint = <&dwc3_ss_out>;
+              };
+          };
+
+          port@2 {
+              reg = <2>;
+
+              endpoint {
+                  remote-endpoint = <&mdss_dp_out>;
+              };
+          };
+      };
     };
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
index aa97478dd0161..f042d6af15949 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
@@ -13,7 +13,9 @@ if:
   properties:
     compatible:
       contains:
-        const: qcom,usb-hs-phy-apq8064
+        enum:
+          - qcom,usb-hs-phy-apq8064
+          - qcom,usb-hs-phy-msm8960
 then:
   properties:
     resets:
@@ -40,6 +42,7 @@ properties:
           - qcom,usb-hs-phy-apq8064
           - qcom,usb-hs-phy-msm8226
           - qcom,usb-hs-phy-msm8916
+          - qcom,usb-hs-phy-msm8960
           - qcom,usb-hs-phy-msm8974
       - const: qcom,usb-hs-phy
 
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
index a26524b7e7b7a..0f200e3f97a9a 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -20,6 +20,7 @@ properties:
           - qcom,usb-snps-femto-v2-phy
       - items:
           - enum:
+              - qcom,sa8775p-usb-hs-phy
               - qcom,sc8280xp-usb-hs-phy
           - const: qcom,usb-snps-hs-5nm-phy
       - items:
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
index e2b861ce16d81..774c3c269c403 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -37,7 +37,8 @@ right representation of the pin.
 Optional properties:
 - GENERIC_PINCONFIG: generic pinconfig options to use:
 	- bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
-	  input-schmitt-enable, input-debounce, output-low, output-high.
+	 drive-push-pull input-schmitt-enable, input-debounce, output-low,
+	 output-high.
 	- for microchip,sama7g5-pinctrl only:
 		- slew-rate: 0 - disabled, 1 - enabled (default)
 - atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
new file mode 100644
index 0000000000000..f3deda9f7127f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-aon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 AON Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+$ref: nvidia,tegra234-pinmux-common.yaml
+
+properties:
+  compatible:
+    const: nvidia,tegra234-pinmux-aon
+
+patternProperties:
+  "^pinmux(-[a-z0-9-]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ can0_dout_paa0, can0_din_paa1, can1_dout_paa2,
+                    can1_din_paa3, can0_stb_paa4, can0_en_paa5,
+                    soc_gpio49_paa6, can0_err_paa7, can1_stb_pbb0,
+                    can1_en_pbb1, soc_gpio50_pbb2, can1_err_pbb3,
+                    spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2,
+                    spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5,
+                    uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0,
+                    gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2,
+                    sce_error_pee0, vcomp_alert_pee1,
+                    ao_retention_n_pee2, batt_oc_pee3, power_on_pee4,
+                    soc_gpio26_pee5, soc_gpio27_pee6, bootv_ctl_n_pee7,
+                    hdmi_cec_pgg0,
+                    # drive groups
+                    drive_touch_clk_pcc4, drive_uart3_rx_pcc6,
+                    drive_uart3_tx_pcc5, drive_gen8_i2c_sda_pdd2,
+                    drive_gen8_i2c_scl_pdd1, drive_spi2_mosi_pcc2,
+                    drive_gen2_i2c_scl_pcc7, drive_spi2_cs0_pcc3,
+                    drive_gen2_i2c_sda_pdd0, drive_spi2_sck_pcc0,
+                    drive_spi2_miso_pcc1, drive_can1_dout_paa2,
+                    drive_can1_din_paa3, drive_can0_dout_paa0,
+                    drive_can0_din_paa1, drive_can0_stb_paa4,
+                    drive_can0_en_paa5, drive_soc_gpio49_paa6,
+                    drive_can0_err_paa7, drive_can1_stb_pbb0,
+                    drive_can1_en_pbb1, drive_soc_gpio50_pbb2,
+                    drive_can1_err_pbb3, drive_sce_error_pee0,
+                    drive_batt_oc_pee3, drive_bootv_ctl_n_pee7,
+                    drive_power_on_pee4, drive_soc_gpio26_pee5,
+                    drive_soc_gpio27_pee6, drive_ao_retention_n_pee2,
+                    drive_vcomp_alert_pee1, drive_hdmi_cec_pgg0 ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux@c300000 {
+      compatible = "nvidia,tegra234-pinmux-aon";
+      reg = <0xc300000 0x4000>;
+
+      pinctrl-names = "cec";
+      pinctrl-0 = <&cec_state>;
+
+      cec_state: pinmux-cec {
+        cec {
+          nvidia,pins = "hdmi_cec_pgg0";
+          nvidia,function = "gp";
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
new file mode 100644
index 0000000000000..4f9de78085e50
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  reg:
+    items:
+      - description: pinmux registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      # We would typically use unevaluatedProperties here but that has the
+      # downside that all the properties in the common bindings become valid
+      # for all chip generations. In this case, however, we want the per-SoC
+      # bindings to be able to override which of the common properties are
+      # allowed, since not all pinmux generations support the same sets of
+      # properties. This way, the common bindings define the format of the
+      # properties but the per-SoC bindings define which of them apply to a
+      # given chip.
+      additionalProperties: false
+      properties:
+        nvidia,function:
+          enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2,
+                  eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3,
+                  pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi,
+                  sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte,
+                  usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd,
+                  i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc,
+                  dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4,
+                  ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb,
+                  displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3,
+                  tsc_alt, istctrl, vi1_alt, dspk1, igpu ]
+
+        # out of the common properties, only these are allowed for Tegra234
+        nvidia,pins: true
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,drive-type: true
+        nvidia,io-hv: true
+
+      required:
+        - nvidia,pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
new file mode 100644
index 0000000000000..17b865ecfcdaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+$ref: nvidia,tegra234-pinmux-common.yaml
+
+properties:
+  compatible:
+    const: nvidia,tegra234-pinmux
+
+patternProperties:
+  "^pinmux(-[a-z0-9-]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2,
+                    dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5,
+                    dap4_din_pa6, dap4_fs_pa7, soc_gpio08_pb0,
+                    qspi0_sck_pc0, qspi0_cs_n_pc1,
+                    qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4,
+                    qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7,
+                    qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2,
+                    qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1,
+                    eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4,
+                    eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7,
+                    eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2,
+                    eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5,
+                    soc_gpio13_pg0, soc_gpio14_pg1, soc_gpio15_pg2,
+                    soc_gpio16_pg3, soc_gpio17_pg4, soc_gpio18_pg5,
+                    soc_gpio19_pg6, soc_gpio20_pg7, soc_gpio21_ph0,
+                    soc_gpio22_ph1, soc_gpio06_ph2, uart4_tx_ph3,
+                    uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6,
+                    soc_gpio41_ph7, soc_gpio42_pi0, soc_gpio43_pi1,
+                    soc_gpio44_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4,
+                    cpu_pwr_req_pi5, soc_gpio07_pi6,
+                    sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2,
+                    sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5,
+                    pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1,
+                    pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3,
+                    pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5,
+                    pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7,
+                    pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1,
+                    pex_wake_n_pl2, soc_gpio34_pl3, dp_aux_ch0_hpd_pm0,
+                    dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2,
+                    dp_aux_ch3_hpd_pm3, soc_gpio55_pm4, soc_gpio36_pm5,
+                    soc_gpio53_pm6, soc_gpio38_pm7, dp_aux_ch3_n_pn0,
+                    soc_gpio39_pn1, soc_gpio40_pn2, dp_aux_ch1_p_pn3,
+                    dp_aux_ch1_n_pn4, dp_aux_ch2_p_pn5, dp_aux_ch2_n_pn6,
+                    dp_aux_ch3_p_pn7, extperiph1_clk_pp0,
+                    extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3,
+                    soc_gpio23_pp4, soc_gpio24_pp5, soc_gpio25_pp6,
+                    pwr_i2c_scl_pp7, pwr_i2c_sda_pq0, soc_gpio28_pq1,
+                    soc_gpio29_pq2, soc_gpio30_pq3, soc_gpio31_pq4,
+                    soc_gpio32_pq5, soc_gpio33_pq6, soc_gpio35_pq7,
+                    soc_gpio37_pr0, soc_gpio56_pr1, uart1_tx_pr2,
+                    uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5,
+                    soc_gpio61_pw0, soc_gpio62_pw1, gpu_pwr_req_px0,
+                    cv_pwr_req_px1, gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4,
+                    uart2_rx_px5, uart2_rts_px6, uart2_cts_px7, spi3_sck_py0,
+                    spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3,
+                    spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6,
+                    uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1,
+                    usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4,
+                    spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7,
+                    spi5_sck_pac0, spi5_miso_pac1, spi5_mosi_pac2,
+                    spi5_cs0_pac3, soc_gpio57_pac4, soc_gpio58_pac5,
+                    soc_gpio59_pac6, soc_gpio60_pac7, soc_gpio45_pad0,
+                    soc_gpio46_pad1, soc_gpio47_pad2, soc_gpio48_pad3,
+                    ufs0_ref_clk_pae0, ufs0_rst_n_pae1,
+                    pex_l5_clkreq_n_paf0, pex_l5_rst_n_paf1,
+                    pex_l6_clkreq_n_paf2, pex_l6_rst_n_paf3,
+                    pex_l7_clkreq_n_pag0, pex_l7_rst_n_pag1,
+                    pex_l8_clkreq_n_pag2, pex_l8_rst_n_pag3,
+                    pex_l9_clkreq_n_pag4, pex_l9_rst_n_pag5,
+                    pex_l10_clkreq_n_pag6, pex_l10_rst_n_pag7,
+                    sdmmc1_comp, eqos_comp, qspi_comp,
+                    # drive groups
+                    drive_soc_gpio08_pb0, drive_soc_gpio36_pm5,
+                    drive_soc_gpio53_pm6, drive_soc_gpio55_pm4,
+                    drive_soc_gpio38_pm7, drive_soc_gpio39_pn1,
+                    drive_soc_gpio40_pn2, drive_dp_aux_ch0_hpd_pm0,
+                    drive_dp_aux_ch1_hpd_pm1, drive_dp_aux_ch2_hpd_pm2,
+                    drive_dp_aux_ch3_hpd_pm3, drive_dp_aux_ch1_p_pn3,
+                    drive_dp_aux_ch1_n_pn4, drive_dp_aux_ch2_p_pn5,
+                    drive_dp_aux_ch2_n_pn6, drive_dp_aux_ch3_p_pn7,
+                    drive_dp_aux_ch3_n_pn0, drive_pex_l2_clkreq_n_pk4,
+                    drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2,
+                    drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0,
+                    drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5,
+                    drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7,
+                    drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1,
+                    drive_soc_gpio34_pl3, drive_pex_l5_clkreq_n_paf0,
+                    drive_pex_l5_rst_n_paf1, drive_pex_l6_clkreq_n_paf2,
+                    drive_pex_l6_rst_n_paf3, drive_pex_l10_clkreq_n_pag6,
+                    drive_pex_l10_rst_n_pag7, drive_pex_l7_clkreq_n_pag0,
+                    drive_pex_l7_rst_n_pag1, drive_pex_l8_clkreq_n_pag2,
+                    drive_pex_l8_rst_n_pag3, drive_pex_l9_clkreq_n_pag4,
+                    drive_pex_l9_rst_n_pag5, drive_sdmmc1_clk_pj0,
+                    drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5,
+                    drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3,
+                    drive_sdmmc1_dat0_pj2 ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux@2430000 {
+        compatible = "nvidia,tegra234-pinmux";
+        reg = <0x2430000 0x17000>;
+
+        pinctrl-names = "pex_rst";
+        pinctrl-0 = <&pex_rst_c5_out_state>;
+
+        pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
+            pexrst {
+                nvidia,pins = "pex_l5_rst_n_paf1";
+                nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+                nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+                nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
new file mode 100644
index 0000000000000..fad0118fd5219
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ5018 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ5018 SoC.
+
+properties:
+  compatible:
+    const: qcom,ipq5018-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 24
+
+  gpio-line-names:
+    maxItems: 47
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq5018-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq5018-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq5018-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-3][0-9]|4[0-6])$"
+        minItems: 1
+        maxItems: 8
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd,
+                audio_rxfsync, audio_rxmclk, audio_txbclk, audio_txd,
+                audio_txfsync, audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart0,
+                blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1,
+                blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1,
+                blsp2_spi, blsp2_spi0, blsp2_spi1, btss, burn0, burn1, cri_trng,
+                cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio,
+                gcc_plltest, gcc_tlmm, gpio, led0, led2, mac0, mac1, mdc, mdio,
+                pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pll_test,
+                prng_rosc, pwm0, pwm1, pwm2, pwm3, qdss_cti_trig_in_a0,
+                qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
+                qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
+                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+                qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs,
+                qspi_data, reset_out, sdc1_clk, sdc1_cmd, sdc1_data, wci_txd,
+                wci_rxd, wsa_swrm, wsi_clk3, wsi_data3, wsis_reset, xfem ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq5018-tlmm";
+        reg = <0x01000000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 47>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio33";
+                function = "blsp1_uart1";
+                bias-pull-down;
+            };
+
+            tx-pins {
+                pins = "gpio34";
+                function = "blsp1_uart1";
+                bias-pull-down;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
index 673713debac28..e5e9962b2174f 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
@@ -53,6 +53,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -86,19 +87,9 @@ $defs:
                 rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max,
                 wci20, wci21, wsa_swrm ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index eaadd5a9a4453..8aaf50181cefc 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -49,6 +49,7 @@ properties:
           - qcom,pm8921-gpio
           - qcom,pm8941-gpio
           - qcom,pm8950-gpio
+          - qcom,pm8953-gpio
           - qcom,pm8994-gpio
           - qcom,pm8998-gpio
           - qcom,pma8084-gpio
@@ -175,6 +176,7 @@ allOf:
               - qcom,pm8350b-gpio
               - qcom,pm8550ve-gpio
               - qcom,pm8950-gpio
+              - qcom,pm8953-gpio
               - qcom,pmi632-gpio
     then:
       properties:
@@ -434,6 +436,7 @@ $defs:
                  - gpio1-gpio44 for pm8921
                  - gpio1-gpio36 for pm8941
                  - gpio1-gpio8 for pm8950 (hole on gpio3)
+                 - gpio1-gpio8 for pm8953 (hole on gpio3 and gpio6)
                  - gpio1-gpio22 for pm8994
                  - gpio1-gpio26 for pm8998
                  - gpio1-gpio22 for pma8084
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
index 0327636493366..c323f6d495a44 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
@@ -45,6 +45,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -81,19 +82,9 @@ $defs:
                 uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1,
                 vsense_trigger, wlan1_adc0, wlan1_adc1 ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
index e608a4f1bcaec..e119a226a4b18 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
@@ -87,7 +87,7 @@ $defs:
                 emac0_mdc, emac0_mdio, emac0_ptp_aux, emac0_ptp_pps, emac1_mcg0,
                 emac1_mcg1, emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio,
                 emac1_ptp_aux, emac1_ptp_pps, gcc_gp1, gcc_gp2, gcc_gp3,
-                gcc_gp4, gcc_gp5, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c,
+                gcc_gp4, gcc_gp5, gpio, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c,
                 jitter_bist, mdp0_vsync0, mdp0_vsync1, mdp0_vsync2, mdp0_vsync3,
                 mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, mdp0_vsync7, mdp0_vsync8,
                 mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4,
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
index 4ae39fc7894a2..4bd6d7977d3e8 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
@@ -55,6 +55,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -104,20 +105,9 @@ $defs:
                 usb1_phy, usb1_sbrx, usb1_sbtx, usb1_usb4, usb2phy_ac,
                 vsense_trigger ]
 
-      bias-bus-hold: true
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
index 2ef793ae40387..27319782d94be 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
@@ -85,7 +85,7 @@ $defs:
                 qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
                 dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
                 dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
-                dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
+                dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, pcie_clkreq,
                 dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
                 sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
                 qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
new file mode 100644
index 0000000000000..7cb96aa75b08b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx75-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX75 TLMM block
+
+maintainers:
+  - Rohit Agarwal <quic_rohiagar@quicinc.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SDX75 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdx75-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 67
+
+  gpio-line-names:
+    maxItems: 133
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx75-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdx75-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sdx75-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, atest_char, audio_ref_clk, bimc_dte, char_exec, coex_uart2,
+                coex_uart, cri_trng, cri_trng0, cri_trng1, dbg_out_clk, ddr_bist,
+                ddr_pxi0, ebi0_wrcdc, ebi2_a, ebi2_lcd, ebi2_lcd_te, emac0_mcg,
+                emac0_ptp, emac1_mcg, emac1_ptp, emac_cdc, emac_pps_in, eth0_mdc,
+                eth0_mdio, eth1_mdc, eth1_mdio, ext_dbg, gcc_125_clk, gcc_gp1_clk,
+                gcc_gp2_clk, gcc_gp3_clk, gcc_plltest, gpio, i2s_mclk, jitter_bist,
+                ldo_en, ldo_update, m_voc, mgpi_clk, native_char, native_tsens,
+                native_tsense, nav_dr_sync, nav_gpio, pa_indicator, pci_e,
+                pcie0_clkreq_n, pcie1_clkreq_n, pcie2_clkreq_n, pll_bist_sync,
+                pll_clk_aux, pll_ref_clk, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
+                qlink0_b_en, qlink0_b_req, qlink0_l_en, qlink0_l_req, qlink0_wmss,
+                qlink1_l_en, qlink1_l_req, qlink1_wmss, qup_se0, qup_se1_l2_mira,
+                qup_se1_l2_mirb, qup_se1_l3_mira, qup_se1_l3_mirb, qup_se2, qup_se3,
+                qup_se4, qup_se5, qup_se6, qup_se7, qup_se8, rgmii_rx_ctl, rgmii_rxc,
+                rgmii_rxd, rgmii_tx_ctl, rgmii_txc, rgmii_txd, sd_card, sdc1_tb,
+                sdc2_tb_trig, sec_mi2s, sgmii_phy_intr0_n, sgmii_phy_intr1_n,
+                spmi_coex, spmi_vgi, tgu_ch0_trigout, tmess_prng0, tmess_prng1,
+                tmess_prng2, tmess_prng3, tri_mi2s, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+                usb2phy_ac_en, vsense_trigger_mirnat]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sdx75-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 133>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio12";
+                function = "qup_se1_l2_mira";
+                bias-disable;
+            };
+
+            tx-pins {
+                pins = "gpio13";
+                function = "qup_se1_l3_mira";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
index a57d44efe5bd9..ede0f3acad9c4 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
@@ -62,6 +62,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -102,19 +103,9 @@ $defs:
                 wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk,
                 wsa_data ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index 1ab0f8dde4770..2120ef71a78d9 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -27,6 +27,8 @@ properties:
       - st,stm32mp135-pinctrl
       - st,stm32mp157-pinctrl
       - st,stm32mp157-z-pinctrl
+      - st,stm32mp257-pinctrl
+      - st,stm32mp257-z-pinctrl
 
   '#address-cells':
     const: 1
@@ -56,7 +58,7 @@ properties:
       Indicates the SOC package used.
       More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [1, 2, 4, 8]
+    enum: [0x1, 0x2, 0x4, 0x8, 0x100, 0x400, 0x800]
 
 patternProperties:
   '^gpio@[0-9a-f]*$':
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
index 598a042850b89..b85f9e36ce4b7 100644
--- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx Zynq Pinctrl
 
 maintainers:
-  - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
+  - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
 
 description: |
   Please refer to pinctrl-bindings.txt in this directory for details of the
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
index 2722dc7bb03da..24ad0614e61b6 100644
--- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
@@ -7,8 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx ZynqMP Pinctrl
 
 maintainers:
-  - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
-  - Rajan Vaja <rajan.vaja@xilinx.com>
+  - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
 
 description: |
   Please refer to pinctrl-bindings.txt in this directory for details of the
diff --git a/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml
new file mode 100644
index 0000000000000..f559a2cfd82ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/atmel,at91sam9260-shdwc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 SHDWC Shutdown Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO
+  and VDDCORE and the wake-up detection on debounced input lines.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9260-shdwc
+      - atmel,at91sam9rl-shdwc
+      - atmel,at91sam9x5-shdwc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  atmel,wakeup-mode:
+    description: operation mode of the wakeup mode
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ none, high, low, any ]
+
+  atmel,wakeup-counter:
+    description: counter on wake-up 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  atmel,wakeup-rtt-timer:
+    description: enable real-time timer wake-up
+    type: boolean
+
+  atmel,wakeup-rtc-timer:
+    description: enable real-time clock wake-up
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,at91sam9x5-shdwc
+    then:
+      properties:
+        atmel,wakeup-rtt-timer: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,at91sam9260-shdwc
+    then:
+      properties:
+        atmel,wakeup-rtc-timer: false
+
+additionalProperties: false
+
+examples:
+  - |
+    shdwc: poweroff@fffffd10 {
+        compatible = "atmel,at91sam9260-shdwc";
+        reg = <0xfffffd10 0x10>;
+        clocks = <&clk32k>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
new file mode 100644
index 0000000000000..8c58e12cdb600
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 SAMA5D2 SHDWC Shutdown Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO
+  and VDDCORE and the wake-up detection on debounced input lines.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,sama7g5-shdwc
+          - const: syscon
+      - enum:
+          - atmel,sama5d2-shdwc
+          - microchip,sam9x60-shdwc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  debounce-delay-us:
+    description:
+      Minimum wake-up inputs debouncer period in microseconds. It is usually a
+      board-related property.
+
+  atmel,wakeup-rtc-timer:
+    description: enable real-time clock wake-up
+    type: boolean
+
+  atmel,wakeup-rtt-timer:
+    description: enable real-time timer wake-up
+    type: boolean
+
+patternProperties:
+  "^input@[0-15]$":
+    description:
+      Wake-up input nodes. These are usually described in the "board" part of
+      the Device Tree. Note also that input 0 is linked to the wake-up pin and
+      is frequently used.
+    type: object
+    properties:
+      reg:
+        description: contains the wake-up input index
+        minimum: 0
+        maximum: 15
+
+      atmel,wakeup-active-high:
+        description:
+          The corresponding wake-up input described by the child forces the
+          wake-up of the core power supply on a high level. The default is to
+          be active low.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,sama5d2-shdwc
+    then:
+      properties:
+        atmel,wakeup-rtt-timer: false
+
+additionalProperties: false
+
+examples:
+  - |
+    shdwc: poweroff@f8048010 {
+        compatible = "atmel,sama5d2-shdwc";
+        reg = <0xf8048010 0x10>;
+        clocks = <&clk32k>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        atmel,wakeup-rtc-timer;
+        debounce-delay-us = <976>;
+
+        input@0 {
+            reg = <0>;
+        };
+
+        input@1 {
+            reg = <1>;
+            atmel,wakeup-active-high;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt
deleted file mode 100644
index 93f31ca1ef4b3..0000000000000
--- a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Broadcom Kona Family Reset Manager
-----------------------------------
-
-The reset manager is used on the Broadcom BCM21664 SoC.
-
-Required properties:
-  - compatible: brcm,bcm21664-resetmgr
-  - reg: memory address & range
-
-Example:
-	brcm,resetmgr@35001f00 {
-		compatible = "brcm,bcm21664-resetmgr";
-		reg = <0x35001f00 0x24>;
-	};
diff --git a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml
new file mode 100644
index 0000000000000..3e28a59d718fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/brcm,bcm21664-resetmgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family reset manager
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm21664-resetmgr
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@35001f00 {
+        compatible = "brcm,bcm21664-resetmgr";
+        reg = <0x35001f00 0x24>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
deleted file mode 100644
index 752d6126d5dab..0000000000000
--- a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-NVMEM reboot mode driver
-
-This driver gets reboot mode magic value from reboot-mode driver
-and stores it in a NVMEM cell named "reboot-mode". Then the bootloader
-can read it and take different action according to the magic
-value stored.
-
-Required properties:
-- compatible: should be "nvmem-reboot-mode".
-- nvmem-cells: A phandle to the reboot mode provided by a nvmem device.
-- nvmem-cell-names: Should be "reboot-mode".
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-	reboot-mode {
-		compatible = "nvmem-reboot-mode";
-		nvmem-cells = <&reboot_mode>;
-		nvmem-cell-names = "reboot-mode";
-
-		mode-normal     = <0xAAAA5501>;
-		mode-bootloader = <0xBBBB5500>;
-		mode-recovery   = <0xCCCC5502>;
-		mode-test       = <0xDDDD5503>;
-	};
diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml
new file mode 100644
index 0000000000000..14a262bcbf7cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/nvmem-reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic NVMEM reboot mode
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+  This driver gets the reboot mode magic value from the reboot-mode driver
+  and stores it in the NVMEM cell named "reboot-mode". The bootloader can
+  then read it and take different action according to the value.
+
+properties:
+  compatible:
+    const: nvmem-reboot-mode
+
+  nvmem-cells:
+    description:
+      A phandle pointing to the nvmem-cells node where the vendor-specific
+      magic value representing the reboot mode is stored.
+    maxItems: 1
+
+  nvmem-cell-names:
+    items:
+      - const: reboot-mode
+
+patternProperties:
+  "^mode-.+":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vendor-specific mode value written to the mode register
+
+required:
+  - compatible
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    reboot-mode {
+        compatible = "nvmem-reboot-mode";
+        nvmem-cells = <&reboot_reason>;
+        nvmem-cell-names = "reboot-mode";
+        mode-recovery = <0x01>;
+        mode-bootloader = <0x02>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
index d96170eecbd22..5e460128b0d10 100644
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -19,6 +19,7 @@ properties:
   compatible:
     enum:
       - qcom,pm8916-pon
+      - qcom,pm8941-pon
       - qcom,pms405-pon
       - qcom,pm8998-pon
       - qcom,pmk8350-pon
@@ -56,7 +57,6 @@ required:
 unevaluatedProperties: false
 
 allOf:
-  - $ref: reboot-mode.yaml#
   - if:
       properties:
         compatible:
@@ -65,6 +65,23 @@ allOf:
               - qcom,pm8916-pon
               - qcom,pms405-pon
               - qcom,pm8998-pon
+    then:
+      allOf:
+        - $ref: reboot-mode.yaml#
+
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+
+    # Special case for pm8941, which doesn't store reset mode
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pm8941-pon
     then:
       properties:
         reg:
@@ -72,6 +89,7 @@ allOf:
         reg-names:
           items:
             - const: pon
+
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/power/reset/restart-handler.yaml b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml
index 1f9a2aac53c08..f2ffdd29d52ac 100644
--- a/Documentation/devicetree/bindings/power/reset/restart-handler.yaml
+++ b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/reset/restart-handler.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Restart and shutdown handler generic binding
+title: Restart and shutdown handler Common Properties
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
index 11f1f98c1cdc1..45792e216981a 100644
--- a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx Zynq MPSoC Power Management
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 description: |
   The zynqmp-power node describes the power management configurations.
diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
index 82f382a7ffb36..4fe9c37052652 100644
--- a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
@@ -68,11 +68,29 @@ properties:
       Interrupt sends an active low, 256 μs pulse to host to report the charger
       device status and faults.
 
+  ti,no-thermistor:
+    type: boolean
+    description: Indicates that no thermistor is connected to the TS pin
+
 required:
   - compatible
   - reg
   - monitored-battery
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,bq25600
+              - ti,bq25601
+              - ti,bq25600d
+              - ti,bq25601d
+    then:
+      properties:
+        ti,no-thermistor: false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml
new file mode 100644
index 0000000000000..277c47e048b65
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pmi8998-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMI8998/PM660 Switch-Mode Battery Charger "2"
+
+maintainers:
+  - Caleb Connolly <caleb.connolly@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pmi8998-charger
+      - qcom,pm660-charger
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: usb-plugin
+      - const: bat-ov
+      - const: wdog-bark
+      - const: usbin-icl-change
+
+  io-channels:
+    items:
+      - description: USB in current in uA
+      - description: USB in voltage in uV
+
+  io-channel-names:
+    items:
+      - const: usbin_i
+      - const: usbin_v
+
+  monitored-battery:
+    description: phandle to the simple-battery node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #interrupt-cells = <4>;
+
+      charger@1000 {
+        compatible = "qcom,pmi8998-charger";
+        reg = <0x1000>;
+
+        interrupts = <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+                     <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+                     <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>,
+                     <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change";
+
+        io-channels = <&pmi8998_rradc 3>,
+                      <&pmi8998_rradc 4>;
+        io-channel-names = "usbin_i",
+                           "usbin_v";
+
+        monitored-battery = <&battery>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
index 756c16d1727db..b5d8888d03d20 100644
--- a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
@@ -26,7 +26,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
new file mode 100644
index 0000000000000..5b3edd79a523f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 PMIC Battery Charger
+
+maintainers:
+  - Jakob Hauser <jahau@rocketmail.com>
+
+description:
+  The battery charger of the multifunction device RT5033 has to be instantiated
+  under sub-node named "charger" using the following format.
+
+properties:
+  compatible:
+    const: richtek,rt5033-charger
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the monitored battery according to battery.yaml. The battery
+      node needs to contain five parameters.
+
+      precharge-current-microamp:
+      Current of pre-charge mode. The pre-charge current levels are 350 mA
+      to 650 mA programmed by I2C per 100 mA.
+
+      constant-charge-current-max-microamp:
+      Current of fast-charge mode. The fast-charge current levels are 700 mA
+      to 2000 mA programmed by I2C per 100 mA.
+
+      charge-term-current-microamp:
+      This property is end of charge current. Its level ranges from 150 mA
+      to 600 mA. Between 150 mA and 300 mA in 50 mA steps, between 300 mA and
+      600 mA in 100 mA steps.
+
+      precharge-upper-limit-microvolt:
+      Voltage of pre-charge mode. If the battery voltage is below the pre-charge
+      threshold voltage, the charger is in pre-charge mode with pre-charge
+      current. Its levels are 2.3 V to 3.8 V programmed by I2C per 0.1 V.
+
+      constant-charge-voltage-max-microvolt:
+      Battery regulation voltage of constant voltage mode. This voltage levels
+      from 3.65 V to 4.4 V by I2C per 0.025 V.
+
+  richtek,usb-connector:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to a USB connector according to usb-connector.yaml. The connector
+      should be a child of the extcon device.
+
+required:
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    charger {
+        compatible = "richtek,rt5033-charger";
+        monitored-battery = <&battery>;
+        richtek,usb-connector = <&usb_con>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
index 3ce648dd91bd3..34b7959d6772f 100644
--- a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
@@ -22,6 +22,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - x-powers,axp192-usb-power-supply
           - x-powers,axp202-usb-power-supply
           - x-powers,axp221-usb-power-supply
           - x-powers,axp223-usb-power-supply
diff --git a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml
index ab45df80345de..d84268b59784f 100644
--- a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml
@@ -11,7 +11,7 @@ maintainers:
   - Claudiu Beznea <claudiu.beznea@microchip.com>
 
 allOf:
-  - $ref: "pwm.yaml#"
+  - $ref: pwm.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
index b3da4e629341c..c01dff3b7f843 100644
--- a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
@@ -43,6 +43,7 @@ properties:
               - fsl,imx8mn-pwm
               - fsl,imx8mp-pwm
               - fsl,imx8mq-pwm
+              - fsl,imx8qxp-pwm
           - const: fsl,imx27-pwm
 
   reg:
@@ -61,6 +62,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml
index 8e176ba7a525f..0fbe8a6469eb2 100644
--- a/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml
@@ -22,6 +22,7 @@ properties:
           - mediatek,mt7623-pwm
           - mediatek,mt7628-pwm
           - mediatek,mt7629-pwm
+          - mediatek,mt7981-pwm
           - mediatek,mt7986-pwm
           - mediatek,mt8183-pwm
           - mediatek,mt8365-pwm
diff --git a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
index 0088bc8e7c541..153e146df7d4b 100644
--- a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
+++ b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
@@ -22,7 +22,9 @@ properties:
           - mediatek,mt8173-disp-pwm
           - mediatek,mt8183-disp-pwm
       - items:
-          - const: mediatek,mt8167-disp-pwm
+          - enum:
+              - mediatek,mt6795-disp-pwm
+              - mediatek,mt8167-disp-pwm
           - const: mediatek,mt8173-disp-pwm
       - items:
           - enum:
diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
index a34cbc13f691c..6ffbed204c259 100644
--- a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
@@ -25,7 +25,7 @@ properties:
     const: 3
 
   fsl,pwm-number:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the number of PWM devices
 
 required:
diff --git a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt
deleted file mode 100644
index f5753b3f79df1..0000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-BCM2835 PWM controller (Raspberry Pi controller)
-
-Required properties:
-- compatible: should be "brcm,bcm2835-pwm"
-- reg: physical base address and length of the controller's registers
-- clocks: This clock defines the base clock frequency of the PWM hardware
-  system, the period and the duty_cycle of the PWM signal is a multiple of
-  the base period.
-- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
-  the cells format.
-
-Examples:
-
-pwm@2020c000 {
-	compatible = "brcm,bcm2835-pwm";
-	reg = <0x2020c000 0x28>;
-	clocks = <&clk_pwm>;
-	#pwm-cells = <3>;
-};
-
-clocks {
-	....
-		clk_pwm: pwm {
-			compatible = "fixed-clock";
-			reg = <3>;
-			#clock-cells = <0>;
-			clock-frequency = <9200000>;
-		};
-	....
-};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml
new file mode 100644
index 0000000000000..15e7fd98defc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-bcm2835.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 PWM controller (Raspberry Pi controller)
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2835-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#pwm-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@2020c000 {
+      compatible = "brcm,bcm2835-pwm";
+      reg = <0x2020c000 0x28>;
+      clocks = <&clk_pwm>;
+      #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml
index 3c01f85029e55..abd9fa873354e 100644
--- a/Documentation/devicetree/bindings/pwm/pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/pwm.yaml
@@ -13,7 +13,7 @@ select: false
 
 properties:
   $nodename:
-    pattern: "^pwm(@.*|-[0-9a-f])*$"
+    pattern: "^pwm(@.*|-([0-9]|[1-9][0-9]+))?$"
 
   "#pwm-cells":
     description:
diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
index 4c80970106877..6b6a302a175ce 100644
--- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
+++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
@@ -35,6 +35,7 @@ properties:
           - renesas,pwm-r8a77980  # R-Car V3H
           - renesas,pwm-r8a77990  # R-Car E3
           - renesas,pwm-r8a77995  # R-Car D3
+          - renesas,pwm-r8a779a0  # R-Car V3U
           - renesas,pwm-r8a779g0  # R-Car V4H
       - const: renesas,pwm-rcar
 
diff --git a/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml
new file mode 100644
index 0000000000000..9e36d5467b569
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/adi,max77541-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Buck Converter for MAX77540/MAX77541
+
+maintainers:
+  - Okan Sahin <okan.sahin@analog.com>
+
+description: |
+  This is a part of device tree bindings for ADI MAX77540/MAX77541
+
+  The buck converter is represented as a sub-node of the PMIC node on the device tree.
+
+  The device has two buck regulators.
+  See also Documentation/devicetree/bindings/mfd/adi,max77541.yaml for
+  additional information and example.
+
+patternProperties:
+  "^buck[12]$":
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Buck regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microvolt:
+        minimum: 300000
+      regulator-max-microvolt:
+        maximum: 5200000
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
index 7034cdca54e04..b6384306db5c6 100644
--- a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
@@ -8,15 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt.
 
 The valid names for regulators are::
 BUCK:
-  buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11,
-  buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1
+  buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu,
+  buck_vs2, buck_vmodem, buck_vs1
 LDO:
   ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio,
   ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
-  ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18,
-  ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12,
-  ldo_vrf18, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
-  ldo_vsim2
+  ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28,
+  ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18,
+  ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2
 
 Example:
 
@@ -305,15 +304,8 @@ Example:
 				regulator-enable-ramp-delay = <120>;
 			};
 
-			mt6358_vcn33_bt_reg: ldo_vcn33_bt {
-				regulator-name = "vcn33_bt";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3500000>;
-				regulator-enable-ramp-delay = <270>;
-			};
-
-			mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
-				regulator-name = "vcn33_wifi";
+			mt6358_vcn33_reg: ldo_vcn33 {
+				regulator-name = "vcn33";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3500000>;
 				regulator-enable-ramp-delay = <270>;
@@ -354,17 +346,5 @@ Example:
 				regulator-max-microvolt = <3100000>;
 				regulator-enable-ramp-delay = <540>;
 			};
-
-			mt6358_vcore_sshub_reg: buck_vcore_sshub {
-				regulator-name = "vcore_sshub";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <1293750>;
-			};
-
-			mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub {
-				regulator-name = "vsram_others_sshub";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <1293750>;
-			};
 		};
 	};
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
index 67a30b23b92c6..e384e4953f0a7 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
@@ -36,6 +36,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   fsl,pfuze-support-disable-sw:
     $ref: /schemas/types.yaml#/definitions/flag
     description: |
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
index 7e58471097f8c..80ecf938b7493 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
@@ -64,6 +64,7 @@ properties:
         defined, <100> is assumed, meaning that
         pwm-dutycycle-range contains values expressed in
         percent.
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 100
 
   pwm-dutycycle-range:
diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
index b1cff3adb21b5..89c564dfa5db5 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -14,6 +14,9 @@ description: |
   regulator will be enabled in situations where the device is required to
   provide power to the connected peripheral.
 
+allOf:
+  - $ref: regulator.yaml#
+
 properties:
   compatible:
     enum:
@@ -25,8 +28,11 @@ properties:
 
 required:
   - compatible
+  - reg
+  - regulator-min-microamp
+  - regulator-max-microamp
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -36,6 +42,8 @@ examples:
         pm8150b_vbus: usb-vbus-regulator@1100 {
             compatible = "qcom,pm8150b-vbus-reg";
             reg = <0x1100>;
+            regulator-min-microamp = <500000>;
+            regulator-max-microamp = <3000000>;
         };
      };
 ...
diff --git a/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml
new file mode 100644
index 0000000000000..97cff71d29677
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/renesas,raa215300.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RAA215300 Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  The RAA215300 is a high-performance, low-cost 9-channel PMIC designed for
+  32-bit and 64-bit MCU and MPU applications. It supports DDR3, DDR3L, DDR4,
+  and LPDDR4 memory power requirements. The internally compensated regulators,
+  built-in Real-Time Clock (RTC), 32kHz crystal oscillator, and coin cell
+  battery charger provide a highly integrated, small footprint power solution
+  ideal for System-On-Module (SOM) applications. A spread spectrum feature
+  provides an ease-of-use solution for noise-sensitive audio or RF applications.
+
+  This device exposes two devices via I2C. One for the integrated RTC IP, and
+  one for everything else.
+
+  Link to datasheet:
+  https://www.renesas.com/in/en/products/power-power-management/multi-channel-power-management-ics-pmics/ssdsoc-power-management-ics-pmic-and-pmus/raa215300-high-performance-9-channel-pmic-supporting-ddr-memory-built-charger-and-rtc
+
+properties:
+  compatible:
+    enum:
+      - renesas,raa215300
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: main
+      - const: rtc
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: |
+      The clocks are optional. The RTC is disabled, if no clocks are
+      provided(either xin or clkin).
+    maxItems: 1
+
+  clock-names:
+    description: |
+      Use xin, if connected to an external crystal.
+      Use clkin, if connected to an external clock signal.
+    enum:
+      - xin
+      - clkin
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    /* 32.768kHz crystal */
+    x2: x2-clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <32768>;
+    };
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        raa215300: pmic@12 {
+            compatible = "renesas,raa215300";
+            reg = <0x12>, <0x6f>;
+            reg-names = "main", "rtc";
+
+            clocks = <&x2>;
+            clock-names = "xin";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml
new file mode 100644
index 0000000000000..386989544dac9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps62870.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS62870/TPS62871/TPS62872/TPS62873 voltage regulator
+
+maintainers:
+  - Mårten Lindahl <marten.lindahl@axis.com>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,tps62870
+      - ti,tps62871
+      - ti,tps62872
+      - ti,tps62873
+
+  reg:
+    maxItems: 1
+
+  regulator-initial-mode:
+    enum: [ 1, 2 ]
+    description: 1 - Forced PWM mode, 2 - Low power mode
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@41 {
+        compatible = "ti,tps62873";
+        reg = <0x41>;
+        regulator-name = "+0.75V";
+        regulator-min-microvolt = <400000>;
+        regulator-max-microvolt = <1675000>;
+        regulator-initial-mode = <1>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
index 3100cb870170c..76e8ca44906ac 100644
--- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
@@ -75,7 +75,7 @@ additionalProperties: false
 examples:
   - |
     remoteproc@1c {
-      compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+      compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
       reg = <0x1c 0x8>, <0x38 0x8>;
       reg-names = "remap", "cpu";
       resets = <&media_cpu_reset>;
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index 959a56f1b6c78..370af61d8f280 100644
--- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -25,7 +25,14 @@ properties:
     maxItems: 3
 
   resets:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: mcu_rst
+      - const: hold_boot
+    minItems: 1
 
   st,syscfg-holdboot:
     description: remote processor reset hold boot
@@ -37,6 +44,7 @@ properties:
           - description: The field mask of the hold boot
 
   st,syscfg-tz:
+    deprecated: true
     description:
       Reference to the system configuration which holds the RCC trust zone mode
     $ref: /schemas/types.yaml#/definitions/phandle-array
@@ -135,22 +143,48 @@ required:
   - compatible
   - reg
   - resets
-  - st,syscfg-holdboot
-  - st,syscfg-tz
+
+allOf:
+  - if:
+      properties:
+        reset-names:
+          not:
+            contains:
+              const: hold_boot
+    then:
+      required:
+        - st,syscfg-holdboot
+    else:
+      properties:
+        st,syscfg-holdboot: false
 
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/reset/stm32mp1-resets.h>
-    m4_rproc: m4@10000000 {
+    m4@10000000 {
       compatible = "st,stm32mp1-m4";
       reg = <0x10000000 0x40000>,
             <0x30000000 0x40000>,
             <0x38000000 0x10000>;
       resets = <&rcc MCU_R>;
+      reset-names = "mcu_rst";
+      /* Hold boot managed using system config*/
       st,syscfg-holdboot = <&rcc 0x10C 0x1>;
-      st,syscfg-tz = <&rcc 0x000 0x1>;
+      st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
+      st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
+    };
+  - |
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    m4@10000000 {
+      compatible = "st,stm32mp1-m4";
+      reg = <0x10000000 0x40000>,
+            <0x30000000 0x40000>,
+            <0x38000000 0x10000>;
+      /* Hold boot managed using SCMI reset controller */
+      resets = <&scmi MCU_R>, <&scmi MCU_HOLD_BOOT_R>;
+      reset-names = "mcu_rst", "hold_boot";
       st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
       st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
     };
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
index c6d86964b72a3..35f0bb38f7b22 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common TI PRU Consumer Binding
+title: TI PRU Consumer Common Properties
 
 maintainers:
   - Suman Anna <s-anna@ti.com>
diff --git a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml
index 05b6648b3458e..851ec24d6142a 100644
--- a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml
+++ b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/reserved-memory/framebuffer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: /reserved-memory framebuffer node bindings
+title: /reserved-memory framebuffer node
 
 maintainers:
   - devicetree-spec@vger.kernel.org
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
new file mode 100644
index 0000000000000..34c5c1c08ec17
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/nuvoton,ma35d1-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Reset Controller
+
+maintainers:
+  - Chi-Fang Li <cfli0@nuvoton.com>
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+description:
+  The system reset controller can be used to reset various peripheral
+  controllers in MA35D1 SoC.
+
+properties:
+  compatible:
+    items:
+      - const: nuvoton,ma35d1-reset
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  # system reset controller node:
+  - |
+
+    system-management@40460000 {
+        compatible = "nuvoton,ma35d1-reset";
+        reg = <0x40460000 0x200>;
+        #reset-cells = <1>;
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/reset/oxnas,reset.txt b/Documentation/devicetree/bindings/reset/oxnas,reset.txt
deleted file mode 100644
index d27ccb5d04fc3..0000000000000
--- a/Documentation/devicetree/bindings/reset/oxnas,reset.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Oxford Semiconductor OXNAS SoC Family RESET Controller
-================================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: For OX810SE, should be "oxsemi,ox810se-reset"
-	      For OX820, should be "oxsemi,ox820-reset"
-- #reset-cells: 1, see below
-
-Parent node should have the following properties :
-- compatible: For OX810SE, should be :
-			"oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
-	      For OX820, should be :
-			"oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"
-
-Reset indices are in dt-bindings include files :
-- For OX810SE: include/dt-bindings/reset/oxsemi,ox810se.h
-- For OX820: include/dt-bindings/reset/oxsemi,ox820.h
-
-example:
-
-sys: sys-ctrl@000000 {
-	compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
-	reg = <0x000000 0x100000>;
-
-	reset: reset-controller {
-		compatible = "oxsemi,ox810se-reset";
-		#reset-cells = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
deleted file mode 100644
index ed836868dbf18..0000000000000
--- a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
+++ /dev/null
@@ -1,55 +0,0 @@
---------------------------------------------------------------------------
- =  Zynq UltraScale+ MPSoC and Versal reset driver binding =
---------------------------------------------------------------------------
-The Zynq UltraScale+ MPSoC and Versal has several different resets.
-
-See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
-about zynqmp resets.
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required Properties:
-- compatible:	"xlnx,zynqmp-reset" for Zynq UltraScale+ MPSoC platform
-		"xlnx,versal-reset" for Versal platform
-- #reset-cells:	Specifies the number of cells needed to encode reset
-		line, should be 1
-
--------
-Example
--------
-
-firmware {
-	zynqmp_firmware: zynqmp-firmware {
-		compatible = "xlnx,zynqmp-firmware";
-		method = "smc";
-
-		zynqmp_reset: reset-controller {
-			compatible = "xlnx,zynqmp-reset";
-			#reset-cells = <1>;
-		};
-	};
-};
-
-Specifying reset lines connected to IP modules
-==============================================
-
-Device nodes that need access to reset lines should
-specify them as a reset phandle in their corresponding node as
-specified in reset.txt.
-
-For list of all valid reset indices for Zynq UltraScale+ MPSoC see
-<dt-bindings/reset/xlnx-zynqmp-resets.h>
-For list of all valid reset indices for Versal see
-<dt-bindings/reset/xlnx-versal-resets.h>
-
-Example:
-
-serdes: zynqmp_phy@fd400000 {
-	...
-
-	resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
-	reset-names = "sata_rst";
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
new file mode 100644
index 0000000000000..0d50f6a54af3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/xlnx,zynqmp-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq UltraScale+ MPSoC and Versal reset
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@amd.com>
+
+description: |
+  The Zynq UltraScale+ MPSoC and Versal has several different resets.
+
+  The PS reset subsystem is responsible for handling the external reset
+  input to the device and that all internal reset requirements are met
+  for the system (as a whole) and for the functional units.
+
+  Please also refer to reset.txt in this directory for common reset
+  controller binding usage. Device nodes that need access to reset
+  lines should specify them as a reset phandle in their corresponding
+  node as specified in reset.txt.
+
+  For list of all valid reset indices for Zynq UltraScale+ MPSoC
+  <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+  For list of all valid reset indices for Versal
+  <dt-bindings/reset/xlnx-versal-resets.h>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynqmp-reset
+      - xlnx,versal-reset
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    zynqmp_reset: reset-controller {
+        compatible = "xlnx,zynqmp-reset";
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
index 3d2934b15e804..38c0b5213736a 100644
--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -23,6 +23,10 @@ description: |
   two cores, each of which has two hyperthreads, could be described as
   having four harts.
 
+allOf:
+  - $ref: /schemas/cpu.yaml#
+  - $ref: extensions.yaml
+
 properties:
   compatible:
     oneOf:
@@ -61,7 +65,7 @@ properties:
       hart.  These values originate from the RISC-V Privileged
       Specification document, available from
       https://riscv.org/specifications/
-    $ref: "/schemas/types.yaml#/definitions/string"
+    $ref: /schemas/types.yaml#/definitions/string
     enum:
       - riscv,sv32
       - riscv,sv39
@@ -79,25 +83,9 @@ properties:
     description:
       The blocksize in bytes for the Zicboz cache operations.
 
-  riscv,isa:
-    description:
-      Identifies the specific RISC-V instruction set architecture
-      supported by the hart.  These are documented in the RISC-V
-      User-Level ISA document, available from
-      https://riscv.org/specifications/
-
-      Due to revisions of the ISA specification, some deviations
-      have arisen over time.
-      Notably, riscv,isa was defined prior to the creation of the
-      Zicsr and Zifencei extensions and thus "i" implies
-      "zicsr_zifencei".
-
-      While the isa strings in ISA specification are case
-      insensitive, letters in the riscv,isa string must be all
-      lowercase to simplify parsing.
-    $ref: "/schemas/types.yaml#/definitions/string"
-    pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$
-
+  # RISC-V has multiple properties for cache op block sizes as the sizes
+  # differ between individual CBO extensions
+  cache-op-block-size: false
   # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
   timebase-frequency: false
 
@@ -120,7 +108,7 @@ properties:
       - interrupt-controller
 
   cpu-idle-states:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
       maxItems: 1
     description: |
@@ -133,11 +121,20 @@ properties:
       DMIPS/MHz, relative to highest capacity-dmips-mhz
       in the system.
 
+anyOf:
+  - required:
+      - riscv,isa
+  - required:
+      - riscv,isa-base
+
+dependencies:
+  riscv,isa-base: [ "riscv,isa-extensions" ]
+  riscv,isa-extensions: [ "riscv,isa-base" ]
+
 required:
-  - riscv,isa
   - interrupt-controller
 
-additionalProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
@@ -154,7 +151,9 @@ examples:
                 i-cache-sets = <128>;
                 i-cache-size = <16384>;
                 reg = <0>;
-                riscv,isa = "rv64imac";
+                riscv,isa-base = "rv64i";
+                riscv,isa-extensions = "i", "m", "a", "c";
+
                 cpu_intc0: interrupt-controller {
                         #interrupt-cells = <1>;
                         compatible = "riscv,cpu-intc";
@@ -177,8 +176,10 @@ examples:
                 i-tlb-size = <32>;
                 mmu-type = "riscv,sv39";
                 reg = <1>;
-                riscv,isa = "rv64imafdc";
                 tlb-split;
+                riscv,isa-base = "rv64i";
+                riscv,isa-extensions = "i", "m", "a", "f", "d", "c";
+
                 cpu_intc1: interrupt-controller {
                         #interrupt-cells = <1>;
                         compatible = "riscv,cpu-intc";
@@ -196,8 +197,10 @@ examples:
                 device_type = "cpu";
                 reg = <0>;
                 compatible = "riscv";
-                riscv,isa = "rv64imafdc";
                 mmu-type = "riscv,sv48";
+                riscv,isa-base = "rv64i";
+                riscv,isa-extensions = "i", "m", "a", "f", "d", "c";
+
                 interrupt-controller {
                         #interrupt-cells = <1>;
                         interrupt-controller;
diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml
new file mode 100644
index 0000000000000..cc1f546fdbdcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/extensions.yaml
@@ -0,0 +1,250 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/extensions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V ISA extensions
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+  - Palmer Dabbelt <palmer@sifive.com>
+  - Conor Dooley <conor@kernel.org>
+
+description: |
+  RISC-V has a large number of extensions, some of which are "standard"
+  extensions, meaning they are ratified by RISC-V International, and others
+  are "vendor" extensions.
+  This document defines properties that indicate whether a hart supports a
+  given extension.
+
+  Once a standard extension has been ratified, no changes in behaviour can be
+  made without the creation of a new extension.
+  The properties for standard extensions therefore map to their originally
+  ratified states, with the exception of the I, Zicntr & Zihpm extensions.
+  See the "i" property for more information.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: riscv
+
+properties:
+  riscv,isa:
+    description:
+      Identifies the specific RISC-V instruction set architecture
+      supported by the hart.  These are documented in the RISC-V
+      User-Level ISA document, available from
+      https://riscv.org/specifications/
+
+      Due to revisions of the ISA specification, some deviations
+      have arisen over time.
+      Notably, riscv,isa was defined prior to the creation of the
+      Zicntr, Zicsr, Zifencei and Zihpm extensions and thus "i"
+      implies "zicntr_zicsr_zifencei_zihpm".
+
+      While the isa strings in ISA specification are case
+      insensitive, letters in the riscv,isa string must be all
+      lowercase.
+    $ref: /schemas/types.yaml#/definitions/string
+    pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$
+    deprecated: true
+
+  riscv,isa-base:
+    description:
+      The base ISA implemented by this hart, as described by the 20191213
+      version of the unprivileged ISA specification.
+    enum:
+      - rv32i
+      - rv64i
+
+  riscv,isa-extensions:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    minItems: 1
+    description: Extensions supported by the hart.
+    items:
+      anyOf:
+        # single letter extensions, in canonical order
+        - const: i
+          description: |
+            The base integer instruction set, as ratified in the 20191213
+            version of the unprivileged ISA specification.
+
+            This does not include Chapter 10, "Counters", which was moved into
+            the Zicntr and Zihpm extensions after the ratification of the
+            20191213 version of the unprivileged specification.
+
+        - const: m
+          description:
+            The standard M extension for integer multiplication and division, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: a
+          description:
+            The standard A extension for atomic instructions, as ratified in the
+            20191213 version of the unprivileged ISA specification.
+
+        - const: f
+          description:
+            The standard F extension for single-precision floating point, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: d
+          description:
+            The standard D extension for double-precision floating-point, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: q
+          description:
+            The standard Q extension for quad-precision floating-point, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: c
+          description:
+            The standard C extension for compressed instructions, as ratified in
+            the 20191213 version of the unprivileged ISA specification.
+
+        - const: v
+          description:
+            The standard V extension for vector operations, as ratified
+            in-and-around commit 7a6c8ae ("Fix text that describes vfmv.v.f
+            encoding") of the riscv-v-spec.
+
+        - const: h
+          description:
+            The standard H extension for hypervisors as ratified in the 20191213
+            version of the privileged ISA specification.
+
+        # multi-letter extensions, sorted alphanumerically
+        - const: smaia
+          description: |
+            The standard Smaia supervisor-level extension for the advanced
+            interrupt architecture for machine-mode-visible csr and behavioural
+            changes to interrupts as frozen at commit ccbddab ("Merge pull
+            request #42 from riscv/jhauser-2023-RC4") of riscv-aia.
+
+        - const: ssaia
+          description: |
+            The standard Ssaia supervisor-level extension for the advanced
+            interrupt architecture for supervisor-mode-visible csr and
+            behavioural changes to interrupts as frozen at commit ccbddab
+            ("Merge pull request #42 from riscv/jhauser-2023-RC4") of riscv-aia.
+
+        - const: sscofpmf
+          description: |
+            The standard Sscofpmf supervisor-level extension for count overflow
+            and mode-based filtering as ratified at commit 01d1df0 ("Add ability
+            to manually trigger workflow. (#2)") of riscv-count-overflow.
+
+        - const: sstc
+          description: |
+            The standard Sstc supervisor-level extension for time compare as
+            ratified at commit 3f9ed34 ("Add ability to manually trigger
+            workflow. (#2)") of riscv-time-compare.
+
+        - const: svinval
+          description:
+            The standard Svinval supervisor-level extension for fine-grained
+            address-translation cache invalidation as ratified in the 20191213
+            version of the privileged ISA specification.
+
+        - const: svnapot
+          description:
+            The standard Svnapot supervisor-level extensions for napot
+            translation contiguity as ratified in the 20191213 version of the
+            privileged ISA specification.
+
+        - const: svpbmt
+          description:
+            The standard Svpbmt supervisor-level extensions for page-based
+            memory types as ratified in the 20191213 version of the privileged
+            ISA specification.
+
+        - const: zba
+          description: |
+            The standard Zba bit-manipulation extension for address generation
+            acceleration instructions as ratified at commit 6d33919 ("Merge pull
+            request #158 from hirooih/clmul-fix-loop-end-condition") of
+            riscv-bitmanip.
+
+        - const: zbb
+          description: |
+            The standard Zbb bit-manipulation extension for basic bit-manipulation
+            as ratified at commit 6d33919 ("Merge pull request #158 from
+            hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
+
+        - const: zbc
+          description: |
+            The standard Zbc bit-manipulation extension for carry-less
+            multiplication as ratified at commit 6d33919 ("Merge pull request
+            #158 from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
+
+        - const: zbs
+          description: |
+            The standard Zbs bit-manipulation extension for single-bit
+            instructions as ratified at commit 6d33919 ("Merge pull request #158
+            from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
+
+        - const: zicbom
+          description:
+            The standard Zicbom extension for base cache management operations as
+            ratified in commit 3dd606f ("Create cmobase-v1.0.pdf") of riscv-CMOs.
+
+        - const: zicbop
+          description:
+            The standard Zicbop extension for cache-block prefetch instructions
+            as ratified in commit 3dd606f ("Create cmobase-v1.0.pdf") of
+            riscv-CMOs.
+
+        - const: zicboz
+          description:
+            The standard Zicboz extension for cache-block zeroing as ratified
+            in commit 3dd606f ("Create cmobase-v1.0.pdf") of riscv-CMOs.
+
+        - const: zicntr
+          description:
+            The standard Zicntr extension for base counters and timers, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: zicsr
+          description: |
+            The standard Zicsr extension for control and status register
+            instructions, as ratified in the 20191213 version of the
+            unprivileged ISA specification.
+
+            This does not include Chapter 10, "Counters", which documents
+            special case read-only CSRs, that were moved into the Zicntr and
+            Zihpm extensions after the ratification of the 20191213 version of
+            the unprivileged specification.
+
+        - const: zifencei
+          description:
+            The standard Zifencei extension for instruction-fetch fence, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: zihintpause
+          description:
+            The standard Zihintpause extension for pause hints, as ratified in
+            commit d8ab5c7 ("Zihintpause is ratified") of the riscv-isa-manual.
+
+        - const: zihpm
+          description:
+            The standard Zihpm extension for hardware performance counters, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: ztso
+          description:
+            The standard Ztso extension for total store ordering, as ratified
+            in commit 2e5236 ("Ztso is now ratified.") of the
+            riscv-isa-manual.
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/riscv/thead.yaml b/Documentation/devicetree/bindings/riscv/thead.yaml
new file mode 100644
index 0000000000000..e62f6821372e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/thead.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/thead.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-HEAD SoC-based boards
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+description:
+  T-HEAD SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Sipeed Lichee Pi 4A board for the Sipeed Lichee Module 4A
+        items:
+          - enum:
+              - sipeed,lichee-pi-4a
+          - const: sipeed,lichee-module-4a
+          - const: thead,th1520
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt
deleted file mode 100644
index 51f003006f044..0000000000000
--- a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Intersil ISL1209/19 I2C RTC/Alarm chip with event in
-
-ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while the
-ISL1208 and ISL1218 do not.  They are all use the same driver with the bindings
-described here, with chip specific properties as noted.
-
-Required properties supported by the device:
- - "compatible": Should be one of the following:
-		- "isil,isl1208"
-		- "isil,isl1209"
-		- "isil,isl1218"
-		- "isil,isl1219"
- - "reg": I2C bus address of the device
-
-Optional properties:
- - "interrupt-names": list which may contains "irq" and "evdet"
-	evdet applies to isl1209 and isl1219 only
- - "interrupts": list of interrupts for "irq" and "evdet"
-	evdet applies to isl1209 and isl1219 only
- - "isil,ev-evienb": Enable or disable internal pull on EVIN pin
-	Applies to isl1209 and isl1219 only
-	Possible values are 0 and 1
-	Value 0 enables internal pull-up on evin pin, 1 disables it.
-	Default will leave the non-volatile configuration of the pullup
-	as is.
-
-Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and #EVDET pin
-connected to SoC gpio2 pin 24 and internal pull-up enabled in EVIN pin.
-
-	isl1219: rtc@68 {
-		compatible = "isil,isl1219";
-		reg = <0x68>;
-		interrupt-names = "irq", "evdet";
-		interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>,
-			<&gpio2 24 IRQ_TYPE_EDGE_FALLING>;
-		isil,ev-evienb = <1>;
-	};
-
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml
new file mode 100644
index 0000000000000..11f7378d4997a
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/isil,isl1208.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL1209/19 I2C RTC/Alarm chip with event in
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+  - Trent Piepho <tpiepho@gmail.com>
+
+description:
+  ISL12X9 have additional pins EVIN and EVDET for tamper detection, while the
+  ISL1208 and ISL1218 do not.
+
+properties:
+  compatible:
+    enum:
+      - isil,isl1208
+      - isil,isl1209
+      - isil,isl1218
+      - isil,isl1219
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description: |
+      Use xin, if connected to an external crystal.
+      Use clkin, if connected to an external clock signal.
+    enum:
+      - xin
+      - clkin
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: irq
+      - const: evdet
+
+  isil,ev-evienb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description: |
+      Enable or disable internal pull on EVIN pin
+      Default will leave the non-volatile configuration of the pullup
+      as is.
+        <0> : Enables internal pull-up on evin pin
+        <1> : Disables internal pull-up on evin pin
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - isil,isl1209
+              - isil,isl1219
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: irq
+            - const: evdet
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: irq
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc_twi: rtc@6f {
+            compatible = "isil,isl1208";
+            reg = <0x6f>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml b/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml
new file mode 100644
index 0000000000000..f89c1f660aeee
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/loongson,rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson Real-Time Clock
+
+description:
+  The Loongson family chips use an on-chip counter 0 (Time Of Year
+  counter) as the RTC.
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - loongson,ls1b-rtc
+          - loongson,ls1c-rtc
+          - loongson,ls7a-rtc
+          - loongson,ls2k1000-rtc
+      - items:
+          - enum:
+              - loongson,ls2k2000-rtc
+              - loongson,ls2k0500-rtc
+          - const: loongson,ls7a-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc@1fe27800 {
+        compatible = "loongson,ls2k1000-rtc";
+        reg = <0x1fe27800 0x100>;
+
+        interrupt-parent = <&liointc1>;
+        interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml
index c6fff5486fe67..efb66df82782f 100644
--- a/Documentation/devicetree/bindings/rtc/rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/rtc.yaml
@@ -15,7 +15,7 @@ description: |
 
 properties:
   $nodename:
-    pattern: "^rtc(@.*|-[0-9a-f])*$"
+    pattern: "^rtc(@.*|-([0-9]|[1-9][0-9]+))?$"
 
   aux-voltage-chargeable:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
index a3603e638c373..9af77f21bb7f4 100644
--- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
@@ -47,8 +47,6 @@ properties:
       - isil,isl1218
       # Intersil ISL12022 Real-time Clock
       - isil,isl12022
-      # Loongson-2K Socs/LS7A bridge Real-time Clock
-      - loongson,ls2x-rtc
       # Real Time Clock Module with I2C-Bus
       - microcrystal,rv3029
       # Real Time Clock
diff --git a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
index 7ed0230f6c677..d1f5eb996dba0 100644
--- a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
@@ -11,7 +11,7 @@ description:
   The RTC controller has separate IRQ lines for seconds and alarm.
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 allOf:
   - $ref: rtc.yaml#
diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
index 30b2131b58601..65cb2e5c5eee0 100644
--- a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
+++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
@@ -16,13 +16,15 @@ properties:
       - enum:
           - atmel,at91rm9200-usart
           - atmel,at91sam9260-usart
-          - microchip,sam9x60-usart
       - items:
           - const: atmel,at91rm9200-dbgu
           - const: atmel,at91rm9200-usart
       - items:
           - const: atmel,at91sam9260-dbgu
           - const: atmel,at91sam9260-usart
+      - items:
+          - const: microchip,sam9x60-usart
+          - const: atmel,at91sam9260-usart
       - items:
           - const: microchip,sam9x60-dbgu
           - const: microchip,sam9x60-usart
diff --git a/Documentation/devicetree/bindings/serial/cavium-uart.txt b/Documentation/devicetree/bindings/serial/cavium-uart.txt
deleted file mode 100644
index 87a6c375cd44d..0000000000000
--- a/Documentation/devicetree/bindings/serial/cavium-uart.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Universal Asynchronous Receiver/Transmitter (UART)
-
-- compatible: "cavium,octeon-3860-uart"
-
-  Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
-
-- reg: The base address of the UART register bank.
-
-- interrupts: A single interrupt specifier.
-
-- current-speed: Optional, the current bit rate in bits per second.
-
-Example:
-	uart1: serial@1180000000c00 {
-		compatible = "cavium,octeon-3860-uart","ns16550";
-		reg = <0x11800 0x00000c00 0x0 0x400>;
-		current-speed = <115200>;
-		interrupts = <0 35>;
-	};
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index a8b323d7bf945..e35ad1109efc8 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Cadence UART Controller
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml b/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml
new file mode 100644
index 0000000000000..a76af0f6009b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/nuvoton,ma35d1-serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+  - Min-Jen Chen <mjchen@nuvoton.com>
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+allOf:
+  - $ref: serial.yaml
+
+properties:
+  compatible:
+    const: nuvoton,ma35d1-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+
+    serial@40700000 {
+        compatible = "nuvoton,ma35d1-uart";
+        reg = <0x40700000 0x100>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk UART0_GATE>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
deleted file mode 100644
index 04e23e63ee4f3..0000000000000
--- a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* NXP LPC1850 UART
-
-Required properties:
-- compatible	: "nxp,lpc1850-uart", "ns16550a".
-- reg		: offset and length of the register set for the device.
-- interrupts	: should contain uart interrupt.
-- clocks	: phandle to the input clocks.
-- clock-names	: required elements: "uartclk", "reg".
-
-Optional properties:
-- dmas		: Two or more DMA channel specifiers following the
-		  convention outlined in bindings/dma/dma.txt
-- dma-names	: Names for the dma channels, if present. There must
-		  be at least one channel named "tx" for transmit
-		  and named "rx" for receive.
-
-Since it's also possible to also use the of_serial.c driver all
-parameters from 8250.txt also apply but are optional.
-
-Example:
-uart0: serial@40081000 {
-	compatible = "nxp,lpc1850-uart", "ns16550a";
-	reg = <0x40081000 0x1000>;
-	reg-shift = <2>;
-	interrupts = <24>;
-	clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
-	clock-names = "uartclk", "reg";
-};
diff --git a/Documentation/devicetree/bindings/slimbus/slimbus.yaml b/Documentation/devicetree/bindings/slimbus/slimbus.yaml
index 22513fb7c59a8..3b8cae9d1016b 100644
--- a/Documentation/devicetree/bindings/slimbus/slimbus.yaml
+++ b/Documentation/devicetree/bindings/slimbus/slimbus.yaml
@@ -15,7 +15,7 @@ description:
 
 properties:
   $nodename:
-    pattern: "^slim(@.*|-[0-9a-f])*$"
+    pattern: "^slim(@.*|-([0-9]|[1-9][0-9]+))?$"
 
   "#address-cells":
     const: 2
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml
new file mode 100644
index 0000000000000..1a952f5698032
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm23550-cdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM23550 Cluster Dormant Control
+
+description:
+  The Cluster Dormant Control block keeps the CPU in idle state. A command
+  needs to be sent to this block to bring the CPU into running state.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm23550-cdc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cdc@3fe0e000 {
+        compatible = "brcm,bcm23550-cdc";
+        reg = <0x3fe0e000 0x78>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
index 3fefd634bc698..a06ac2177444e 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
@@ -33,6 +33,7 @@ properties:
               - mediatek,mt2701-pwrap
               - mediatek,mt6765-pwrap
               - mediatek,mt6779-pwrap
+              - mediatek,mt6795-pwrap
               - mediatek,mt6797-pwrap
               - mediatek,mt6873-pwrap
               - mediatek,mt7622-pwrap
diff --git a/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml
new file mode 100644
index 0000000000000..23e7e4ea01ff7
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/nuvoton/nuvoton,npcm-gcr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Global Control Registers block in Nuvoton SoCs
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description:
+  The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs
+  that expose misc functionality such as chip model and version information or
+  pinmux settings.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nuvoton,wpcm450-gcr
+          - nuvoton,npcm750-gcr
+          - nuvoton,npcm845-gcr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    gcr: syscon@800000 {
+      compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd";
+      reg = <0x800000 0x1000>;
+
+      mux-controller {
+        compatible = "mmio-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks = <0x38 0x07>;
+        idle-states = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
index 798f15588ee25..9dc8e48c8af4e 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -26,6 +26,7 @@ properties:
     items:
       - enum:
           - qcom,qdu1000-aoss-qmp
+          - qcom,sa8775p-aoss-qmp
           - qcom,sc7180-aoss-qmp
           - qcom,sc7280-aoss-qmp
           - qcom,sc8180x-aoss-qmp
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
index 14dd29471c803..f2c5ec7e6437b 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
@@ -55,9 +55,10 @@ additionalProperties: false
 examples:
   - |
     eud@88e0000 {
-           compatible = "qcom,sc7280-eud","qcom,eud";
+           compatible = "qcom,sc7280-eud", "qcom,eud";
            reg = <0x88e0000 0x2000>,
                  <0x88e2000 0x1000>;
+
            ports {
                    #address-cells = <1>;
                    #size-cells = <0>;
@@ -67,6 +68,7 @@ examples:
                                    remote-endpoint = <&usb2_role_switch>;
                            };
                    };
+
                    port@1 {
                            reg = <1>;
                            eud_con: endpoint {
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml
new file mode 100644
index 0000000000000..031800985b5eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm-master-stats.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. (QTI) RPM Master Stats
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  The Qualcomm RPM (Resource Power Manager) architecture includes a concept
+  of "RPM Masters". They can be thought of as "the local gang leaders", usually
+  spanning a single subsystem (e.g. APSS, ADSP, CDSP). All of the RPM decisions
+  (particularly around entering hardware-driven low power modes: XO shutdown
+  and total system-wide power collapse) are first made at Master-level, and
+  only then aggregated for the entire system.
+
+  The Master Stats provide a few useful bits that can be used to assess whether
+  our device has entered the desired low-power mode, how long it took to do so,
+  the duration of that residence, how long it took to come back online,
+  how many times a given sleep state was entered and which cores are actively
+  voting for staying awake.
+
+  This scheme has been used on various SoCs in the 2013-2023 era, with some
+  newer or higher-end designs providing this information through an SMEM query.
+
+properties:
+  compatible:
+    const: qcom,rpm-master-stats
+
+  qcom,rpm-msg-ram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: Phandle to an RPM MSG RAM slice containing the master stats
+    minItems: 1
+    maxItems: 5
+
+  qcom,master-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      The name of the RPM Master which owns the MSG RAM slice where this
+      instance of Master Stats resides
+    minItems: 1
+    maxItems: 5
+
+required:
+  - compatible
+  - qcom,rpm-msg-ram
+  - qcom,master-names
+
+additionalProperties: false
+
+examples:
+  - |
+    stats {
+      compatible = "qcom,rpm-master-stats";
+      qcom,rpm-msg-ram = <&apss_master_stats>,
+                         <&mpss_master_stats>,
+                         <&adsp_master_stats>,
+                         <&cdsp_master_stats>,
+                         <&tz_master_stats>;
+      qcom,master-names = "APSS",
+                          "MPSS",
+                          "ADSP",
+                          "CDSP",
+                          "TZ";
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
index a4046ba608466..af632d0e0355c 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
@@ -124,6 +124,7 @@ required:
   - qcom,tcs-offset
   - reg
   - reg-names
+  - power-domains
 
 additionalProperties: false
 
@@ -179,6 +180,7 @@ examples:
                           <SLEEP_TCS   1>,
                           <WAKE_TCS    1>,
                           <CONTROL_TCS 0>;
+        power-domains = <&CLUSTER_PD>;
     };
 
   - |
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index ea86569a40d3c..65c02a7fef809 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -81,6 +81,7 @@ if:
       contains:
         enum:
           - qcom,rpm-apq8084
+          - qcom,rpm-msm8226
           - qcom,rpm-msm8916
           - qcom,rpm-msm8936
           - qcom,rpm-msm8974
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
index 7ab8cfff18c19..96a7f18220225 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. (QTI) Stats
 
 maintainers:
-  - Maulik Shah <mkshah@codeaurora.org>
+  - Maulik Shah <quic_mkshah@quicinc.com>
 
 description:
   Always On Processor/Resource Power Manager maintains statistics of the SoC
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 65a2d5a4f28d8..e4fa6a07b4fa2 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -24,6 +24,7 @@ properties:
               - rockchip,rk3588-bigcore1-grf
               - rockchip,rk3588-ioc
               - rockchip,rk3588-php-grf
+              - rockchip,rk3588-pipe-phy-grf
               - rockchip,rk3588-sys-grf
               - rockchip,rk3588-pcie3-phy-grf
               - rockchip,rk3588-pcie3-pipe-grf
@@ -52,6 +53,7 @@ properties:
               - rockchip,rk3399-pmugrf
               - rockchip,rk3568-grf
               - rockchip,rk3568-pmugrf
+              - rockchip,rk3588-usb2phy-grf
               - rockchip,rv1108-grf
               - rockchip,rv1108-pmugrf
               - rockchip,rv1126-grf
@@ -119,7 +121,7 @@ allOf:
         usbphy:
           type: object
 
-          $ref: "/schemas/phy/rockchip-usb-phy.yaml#"
+          $ref: /schemas/phy/rockchip-usb-phy.yaml#
 
           unevaluatedProperties: false
 
@@ -134,14 +136,14 @@ allOf:
         gpio:
           type: object
 
-          $ref: "/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#"
+          $ref: /schemas/gpio/rockchip,rk3328-grf-gpio.yaml#
 
           unevaluatedProperties: false
 
         power-controller:
           type: object
 
-          $ref: "/schemas/power/rockchip,power-controller.yaml#"
+          $ref: /schemas/power/rockchip,power-controller.yaml#
 
           unevaluatedProperties: false
 
@@ -156,7 +158,7 @@ allOf:
         mipi-dphy-rx0:
           type: object
 
-          $ref: "/schemas/phy/rockchip-mipi-dphy-rx0.yaml#"
+          $ref: /schemas/phy/rockchip-mipi-dphy-rx0.yaml#
 
           unevaluatedProperties: false
 
@@ -184,7 +186,7 @@ allOf:
         reboot-mode:
           type: object
 
-          $ref: "/schemas/power/reset/syscon-reboot-mode.yaml#"
+          $ref: /schemas/power/reset/syscon-reboot-mode.yaml#
 
           unevaluatedProperties: false
 
@@ -199,6 +201,7 @@ allOf:
               - rockchip,rk3308-usb2phy-grf
               - rockchip,rk3328-usb2phy-grf
               - rockchip,rk3399-grf
+              - rockchip,rk3588-usb2phy-grf
               - rockchip,rv1108-grf
 
     then:
@@ -238,7 +241,7 @@ allOf:
         io-domains:
           type: object
 
-          $ref: "/schemas/power/rockchip-io-domain.yaml#"
+          $ref: /schemas/power/rockchip-io-domain.yaml#
 
           unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
index 5d8d9497f18e8..e1d716df5dfa6 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
@@ -17,6 +17,7 @@ select:
         enum:
           - samsung,exynos3250-pmu
           - samsung,exynos4210-pmu
+          - samsung,exynos4212-pmu
           - samsung,exynos4412-pmu
           - samsung,exynos5250-pmu
           - samsung,exynos5260-pmu
@@ -36,6 +37,7 @@ properties:
           - enum:
               - samsung,exynos3250-pmu
               - samsung,exynos4210-pmu
+              - samsung,exynos4212-pmu
               - samsung,exynos4412-pmu
               - samsung,exynos5250-pmu
               - samsung,exynos5260-pmu
@@ -50,6 +52,7 @@ properties:
           - enum:
               - samsung,exynos3250-pmu
               - samsung,exynos4210-pmu
+              - samsung,exynos4212-pmu
               - samsung,exynos4412-pmu
               - samsung,exynos5250-pmu
               - samsung,exynos5420-pmu
@@ -125,6 +128,7 @@ allOf:
             enum:
               - samsung,exynos3250-pmu
               - samsung,exynos4210-pmu
+              - samsung,exynos4212-pmu
               - samsung,exynos4412-pmu
               - samsung,exynos5250-pmu
               - samsung,exynos5410-pmu
@@ -143,6 +147,7 @@ allOf:
             enum:
               - samsung,exynos3250-pmu
               - samsung,exynos4210-pmu
+              - samsung,exynos4212-pmu
               - samsung,exynos4412-pmu
               - samsung,exynos5250-pmu
               - samsung,exynos5420-pmu
diff --git a/Documentation/devicetree/bindings/sound/adi,max98388.yaml b/Documentation/devicetree/bindings/sound/adi,max98388.yaml
new file mode 100644
index 0000000000000..93ccd59057361
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,max98388.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,max98388.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX98388 Speaker Amplifier
+
+maintainers:
+  - Ryan Lee <ryans.lee@analog.com>
+
+description:
+  The MAX98388 is a mono Class-D speaker amplifier with I/V feedback.
+  The device provides a PCM interface for audio data and a standard
+  I2C interface for control data communication.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,max98388
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  adi,vmon-slot-no:
+    description: slot number of the voltage feedback monitor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 0
+
+  adi,imon-slot-no:
+    description: slot number of the current feedback monitor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 1
+
+  adi,interleave-mode:
+    description:
+      For cases where a single combined channel for the I/V feedback data
+      is not sufficient, the device can also be configured to share
+      a single data output channel on alternating frames.
+      In this configuration, the current and voltage data will be frame
+      interleaved on a single output channel.
+    type: boolean
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        max98388: amplifier@39 {
+            compatible = "adi,max98388";
+            reg = <0x39>;
+            #sound-dai-cells = <0>;
+            adi,vmon-slot-no = <0>;
+            adi,imon-slot-no = <1>;
+            adi,interleave-mode;
+            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml
new file mode 100644
index 0000000000000..f3f32540779c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,ssm2518.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices SSM2518 audio amplifier
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: adi,ssm2518
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C address of the device. This will either be 0x34 (ADDR pin low)
+       or 0x35 (ADDR pin high)
+
+  gpios:
+    maxItems: 1
+    description: |
+       GPIO connected to the nSD pin. If the property is not present
+       it is assumed that the nSD pin is hardwired to always on.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   i2c {
+     #address-cells = <1>;
+     #size-cells = <0>;
+     codec@34 {
+       compatible = "adi,ssm2518";
+       reg = <0x34>;
+       gpios = <&gpio 5 0>;
+     };
+   };
diff --git a/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml
new file mode 100644
index 0000000000000..144450df58695
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,ssm3515.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices SSM3515 Audio Amplifier
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+description: |
+  SSM3515 is a mono Class-D audio amplifier with digital input.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/SSM3515.pdf
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ssm3515
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      codec@14 {
+        compatible = "adi,ssm3515";
+        reg = <0x14>;
+        #sound-dai-cells = <0>;
+        sound-name-prefix = "Left Tweeter";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
index 3de7b36829da7..d3ce4de449d51 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
@@ -39,22 +39,4 @@ required:
 
 additionalProperties: false
 
-examples:
-  - |
-    sound {
-        compatible = "audio-graph-card2";
-
-        links = <&cpu_port>;
-    };
-
-    cpu {
-        compatible = "cpu-driver";
-
-        cpu_port: port { cpu_ep: endpoint { remote-endpoint = <&codec_ep>; }; };
-    };
-
-    codec {
-        compatible = "codec-driver";
-
-        port { codec_ep: endpoint { remote-endpoint = <&cpu_ep>; }; };
-    };
+...
diff --git a/Documentation/devicetree/bindings/sound/audio-graph.yaml b/Documentation/devicetree/bindings/sound/audio-graph.yaml
index c87eb91de1593..ed31e04ff6a68 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph.yaml
@@ -24,7 +24,11 @@ properties:
       connection's sink, the second being the connection's source.
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
   widgets:
-    description: User specified audio sound widgets.
+    description: |
+      User specified audio sound widgets.
+      Each entry is a pair of strings, the first being the type of
+      widget ("Microphone", "Line", "Headphone", "Speaker"), the
+      second being the machine specific name for the widget.
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
   convert-rate:
     $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-rate
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
index 2ab74f9956852..4c9acb8d4c4c6 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
@@ -62,7 +62,7 @@ patternProperties:
           GPIO pin direction. Valid only when 'gpio-ctrl' is 1
             0 = Output
             1 = Input
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1
         default: 1
@@ -71,7 +71,7 @@ patternProperties:
           GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0
             0 = Low
             1 = High
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1
         default: 0
@@ -80,7 +80,7 @@ patternProperties:
           GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0
             0 = CMOS
             1 = Open Drain
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1
         default: 0
@@ -90,7 +90,7 @@ patternProperties:
           and 'gpio-dir' is 0
             0 = Non-inverted, Active High
             1 = Inverted, Active Low
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1
         default: 0
@@ -114,7 +114,7 @@ patternProperties:
             0 = High impedance input
             1 = Pin acts as a GPIO, direction controlled by 'gpio-dir'
             2-7 = Reserved
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 7
         default: 0
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
index 670b67ec0b617..f7bafbd4f1c2d 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
@@ -44,6 +44,10 @@ properties:
   VAHP-supply:
     description: phandle to voltage regulator of headphone
 
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -69,6 +73,13 @@ examples:
         VA-supply = <&reg_audio>;
         VAHP-supply = <&reg_audio>;
         reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+
+        /* assume audio-graph */
+        port {
+          cpu_endpoint: endpoint {
+            remote-endpoint = <&cpu_endpoint>;
+          };
+        };
       };
     };
 ...
diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt
deleted file mode 100644
index add1caf26ac27..0000000000000
--- a/Documentation/devicetree/bindings/sound/da7219.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-Dialog Semiconductor DA7219 Audio Codec bindings
-
-DA7219 is an audio codec with advanced accessory detect features.
-
-======
-
-Required properties:
-- compatible : Should be "dlg,da7219"
-- reg: Specifies the I2C slave address
-
-- interrupts : IRQ line info for DA7219.
-  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-   further information relating to interrupt properties)
-
-- VDD-supply: VDD power supply for the device
-- VDDMIC-supply: VDDMIC power supply for the device
-- VDDIO-supply: VDDIO power supply for the device
-  (See Documentation/devicetree/bindings/regulator/regulator.txt for further
-   information relating to regulators)
-
-Optional properties:
-- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
-  interrupt is to be used to wake system, otherwise "irq" should be used.
-- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
-
-- #clock-cells :  Should be set to '<1>', two clock sources provided;
-- clock-output-names : Names given for DAI clock outputs (WCLK & BCLK);
-
-- clocks : phandle and clock specifier for codec MCLK.
-- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
-
-- dlg,micbias-lvl : Voltage (mV) for Mic Bias
-	[<1600>, <1800>, <2000>, <2200>, <2400>, <2600>]
-- dlg,mic-amp-in-sel : Mic input source type
-	["diff", "se_p", "se_n"]
-
-Deprecated properties:
-- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
-  (LDO unavailable in production HW so property no longer required).
-
-======
-
-Child node - 'da7219_aad':
-
-Optional properties:
-- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV).
-	[<2800>, <2900>]
-- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms)
-- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms)
-	[<2>, <5>, <10>, <50>, <100>, <200>, <500>]
-- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms)
-	[<200>, <500>, <750>, <1000>]
-- dlg,jack-ins-deb : Debounce time for jack insertion (ms)
-	[<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>]
-- dlg,jack-det-rate: Jack type detection latency (3/4 pole)
-	["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"]
-- dlg,jack-rem-deb : Debounce time for jack removal (ms)
-	[<1>, <5>, <10>, <20>]
-- dlg,a-d-btn-thr : Impedance threshold between buttons A and D
-	[0x0 - 0xFF]
-- dlg,d-b-btn-thr : Impedance threshold between buttons D and B
-	[0x0 - 0xFF]
-- dlg,b-c-btn-thr : Impedance threshold between buttons B and C
-	[0x0 - 0xFF]
-- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic
-	[0x0 - 0xFF]
-- dlg,btn-avg : Number of 8-bit readings for averaged button measurement
-	[<1>, <2>, <4>, <8>]
-- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement
-	[<1>, <2>, <4>, <8>]
-
-======
-
-Example:
-
-	codec: da7219@1a {
-		compatible = "dlg,da7219";
-		reg = <0x1a>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
-		VDD-supply = <&reg_audio>;
-		VDDMIC-supply = <&reg_audio>;
-		VDDIO-supply = <&reg_audio>;
-
-		#clock-cells = <1>;
-		clock-output-names = "dai-wclk", "dai-bclk";
-
-		clocks = <&clks 201>;
-		clock-names = "mclk";
-
-		dlg,ldo-lvl = <1200>;
-		dlg,micbias-lvl = <2600>;
-		dlg,mic-amp-in-sel = "diff";
-
-		da7219_aad {
-			dlg,btn-cfg = <50>;
-			dlg,mic-det-thr = <500>;
-			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
-			dlg,jack-rem-deb = <1>;
-
-			dlg,a-d-btn-thr = <0xa>;
-			dlg,d-b-btn-thr = <0x16>;
-			dlg,b-c-btn-thr = <0x21>;
-			dlg,c-mic-btn-thr = <0x3E>;
-
-			dlg,btn-avg = <4>;
-			dlg,adc-1bit-rpt = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/dialog,da7219.yaml b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml
new file mode 100644
index 0000000000000..bb5af48ab1e19
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dialog,da7219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA7219 Audio Codec
+
+maintainers:
+  - David Rau <David.Rau.opensource@dm.renesas.com>
+
+description:
+  The DA7219 is an ultra low-power audio codec with
+  in-built advanced accessory detection (AAD) for mobile
+  computing and accessory applications, which supports
+  sample rates up to 96 kHz at 24-bit resolution.
+
+properties:
+  compatible:
+    const: dlg,da7219
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  VDD-supply:
+    description:
+      VDD power supply for the device.
+
+  VDDMIC-supply:
+    description:
+      VDDMIC power supply for the device.
+
+  VDDIO-supply:
+    description:
+      VDDIO power supply for the device.
+
+  interrupt-names:
+    description:
+      Should be "wakeup" if interrupt is to be used to wake system,
+      otherwise "irq" should be used.
+    enum:
+      - wakeup
+      - irq
+
+  wakeup-source:
+    type: boolean
+    description:
+      Flag to indicate this device can wake system (suspend/resume).
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    minItems: 2
+    maxItems: 2
+    description:
+      Name given for DAI WCLK and BCLK outputs.
+
+  clocks:
+    maxItems: 1
+    description:
+      phandle and clock specifier for codec MCLK.
+
+  clock-names:
+    const: mclk
+
+  dlg,micbias-lvl:
+    enum: [1600, 1800, 2000, 2200, 2400, 2600]
+    description:
+      Voltage (mV) for Mic Bias.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  dlg,mic-amp-in-sel:
+    enum: ["diff", "se_p", "se_n"]
+    description:
+      Mic input source type.
+
+      diff - Differential.
+
+      se_p - MIC_P.
+      Positive differential analog microphone input.
+
+      se_n - MIC_N.
+      Negative differential analog microphone input.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  da7219_aad:
+    type: object
+    description:
+      Configuration of advanced accessory detection.
+    properties:
+      dlg,micbias-pulse-lvl:
+        enum: [2800, 2900]
+        description:
+          Mic bias higher voltage pulse level (mV).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,micbias-pulse-time:
+        description:
+          Mic bias higher voltage pulse duration (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+
+      dlg,btn-cfg:
+        enum: [2, 5, 10, 50, 100, 200, 500]
+        description:
+          Periodic button press measurements for 4-pole jack (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,mic-det-thr:
+        enum: [200, 500, 750, 1000]
+        description:
+          Impedance threshold for mic detection measurement (Ohms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,jack-ins-deb:
+        enum: [5, 10, 20, 50, 100, 200, 500, 1000]
+        description:
+          Debounce time for jack insertion (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,jack-ins-det-pty:
+        enum: ["low", "high"]
+        description:
+          Polarity for jack insertion detection.
+        $ref: /schemas/types.yaml#/definitions/string
+
+      dlg,jack-det-rate:
+        enum: ["32_64", "64_128", "128_256", "256_512"]
+        description:
+          Jack type (3/4 pole) detection latency (ms).
+        $ref: /schemas/types.yaml#/definitions/string
+
+      dlg,jack-rem-deb:
+        enum: [1, 5, 10, 20]
+        description:
+          Debounce time for jack removal (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,a-d-btn-thr:
+        description:
+          Impedance threshold between buttons A and D.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,d-b-btn-thr:
+        description:
+          Impedance threshold between buttons D and B.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,b-c-btn-thr:
+        description:
+          Impedance threshold between buttons B and C.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,c-mic-btn-thr:
+        description:
+          Impedance threshold between button C and Mic.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,btn-avg:
+        enum: [1, 2, 4, 8]
+        description:
+          Number of 8-bit readings for averaged button measurement.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,adc-1bit-rpt:
+        enum: [1, 2, 4, 8]
+        description:
+          Repeat count for 1-bit button measurement.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - VDD-supply
+  - VDDMIC-supply
+  - VDDIO-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      codec: da7219@1a {
+          compatible = "dlg,da7219";
+          reg = <0x1a>;
+
+          interrupt-parent = <&gpio6>;
+          interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+          VDD-supply = <&vdd_reg>;
+          VDDMIC-supply = <&vddmic_reg>;
+          VDDIO-supply = <&vddio_reg>;
+
+          #clock-cells = <1>;
+          clock-output-names = "da7219-dai-wclk", "da7219-dai-bclk";
+
+          clocks = <&clks 201>;
+          clock-names = "mclk";
+
+          dlg,micbias-lvl = <2600>;
+          dlg,mic-amp-in-sel = "diff";
+
+          da7219_aad {
+              dlg,btn-cfg = <50>;
+              dlg,mic-det-thr = <500>;
+              dlg,jack-ins-deb = <20>;
+              dlg,jack-ins-det-pty = "low";
+              dlg,jack-det-rate = "32_64";
+              dlg,jack-rem-deb = <1>;
+
+              dlg,a-d-btn-thr = <0xa>;
+              dlg,d-b-btn-thr = <0x16>;
+              dlg,b-c-btn-thr = <0x21>;
+              dlg,c-mic-btn-thr = <0x3E>;
+
+              dlg,btn-avg = <4>;
+              dlg,adc-1bit-rpt = <1>;
+          };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
index 8b4f4015cfe43..4e8dbc5abfd1d 100644
--- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@@ -46,6 +46,8 @@ The compatible list for this generic sound card currently:
 
  "fsl,imx-audio-wm8958"
 
+ "fsl,imx-audio-nau8822"
+
 Required properties:
 
   - compatible		: Contains one of entries in the compatible list.
diff --git a/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml b/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml
new file mode 100644
index 0000000000000..5329dc140b1c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,chv3-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Chameleon v3 audio codec
+
+maintainers:
+  - Paweł Anikiel <pan@semihalf.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: google,chv3-codec
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    audio-codec {
+        compatible = "google,chv3-codec";
+    };
diff --git a/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml b/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml
new file mode 100644
index 0000000000000..3ce910f44d393
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,chv3-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Chameleon v3 I2S device
+
+maintainers:
+  - Paweł Anikiel <pan@semihalf.com>
+
+description: |
+  I2S device for the Google Chameleon v3. The device handles both RX
+  and TX using a producer/consumer ring buffer design.
+
+properties:
+  compatible:
+    const: google,chv3-i2s
+
+  reg:
+    items:
+      - description: core registers
+      - description: irq registers
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2s@c0060300 {
+        compatible = "google,chv3-i2s";
+        reg = <0xc0060300 0x100>,
+              <0xc0060f00 0x10>;
+        interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
index 67ccddd44489b..ba5b7728cf333 100644
--- a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
+++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Google SC7180-Trogdor ASoC sound card driver
 
 maintainers:
-  - Rohit kumar <rohitkr@codeaurora.org>
+  - Rohit kumar <quic_rohkumar@quicinc.com>
   - Cheng-Yi Chiang <cychiang@chromium.org>
 
 description:
@@ -74,7 +74,8 @@ patternProperties:
 
         properties:
           sound-dai:
-            maxItems: 1
+            minItems: 1
+            maxItems: 4
 
     required:
       - link-name
diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
index c59a7cd9eaa9b..d15c000f14e15 100644
--- a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
+++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
@@ -23,6 +23,7 @@ properties:
           - ingenic,jz4760-i2s
           - ingenic,jz4770-i2s
           - ingenic,jz4780-i2s
+          - ingenic,x1000-i2s
       - items:
           - const: ingenic,jz4725b-i2s
           - const: ingenic,jz4740-i2s
diff --git a/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml b/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml
new file mode 100644
index 0000000000000..61e8babed402f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/loongson,ls-audio-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson 7axxx/2kxxx ASoC audio sound card driver
+
+maintainers:
+  - Yingkun Meng <mengyingkun@loongson.cn>
+
+description:
+  The binding describes the sound card present in loongson
+  7axxx/2kxxx platform. The sound card is an ASoC component
+  which uses Loongson I2S controller to transfer the audio data.
+
+properties:
+  compatible:
+    const: loongson,ls-audio-card
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  mclk-fs:
+    $ref: simple-card.yaml#/definitions/mclk-fs
+
+  cpu:
+    description: Holds subnode which indicates cpu dai.
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+    required:
+      - sound-dai
+
+  codec:
+    description: Holds subnode which indicates codec dai.
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+    required:
+      - sound-dai
+
+required:
+  - compatible
+  - model
+  - mclk-fs
+  - cpu
+  - codec
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "loongson,ls-audio-card";
+        model = "loongson-audio";
+        mclk-fs = <512>;
+
+        cpu {
+            sound-dai = <&i2s>;
+        };
+        codec {
+             sound-dai = <&es8323>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
index 82ccb32f08f27..e6cb711ece773 100644
--- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
@@ -29,6 +29,10 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle of the mediatek topckgen controller
 
+  mediatek,infracfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the mediatek infracfg controller
+
   power-domains:
     maxItems: 1
 
@@ -52,6 +56,11 @@ properties:
       - description: mux for i2si1_mck
       - description: mux for i2si2_mck
       - description: audio 26m clock
+      - description: audio pll1 divide 4
+      - description: audio pll2 divide 4
+      - description: clock divider for iec
+      - description: mux for a2sys clock
+      - description: mux for aud_iec
 
   clock-names:
     items:
@@ -63,16 +72,21 @@ properties:
       - const: apll12_div2
       - const: apll12_div3
       - const: apll12_div9
-      - const: a1sys_hp_sel
-      - const: aud_intbus_sel
-      - const: audio_h_sel
-      - const: audio_local_bus_sel
-      - const: dptx_m_sel
-      - const: i2so1_m_sel
-      - const: i2so2_m_sel
-      - const: i2si1_m_sel
-      - const: i2si2_m_sel
+      - const: top_a1sys_hp
+      - const: top_aud_intbus
+      - const: top_audio_h
+      - const: top_audio_local_bus
+      - const: top_dptx
+      - const: top_i2so1
+      - const: top_i2so2
+      - const: top_i2si1
+      - const: top_i2si2
       - const: adsp_audio_26m
+      - const: apll1_d4
+      - const: apll2_d4
+      - const: apll12_div4
+      - const: top_a2sys
+      - const: top_aud_iec
 
   mediatek,etdm-in1-cowork-source:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -144,6 +158,7 @@ required:
   - resets
   - reset-names
   - mediatek,topckgen
+  - mediatek,infracfg
   - power-domains
   - clocks
   - clock-names
@@ -162,6 +177,7 @@ examples:
         resets = <&watchdog 14>;
         reset-names = "audiosys";
         mediatek,topckgen = <&topckgen>;
+        mediatek,infracfg = <&infracfg_ao>;
         power-domains = <&spm 13>; //MT8188_POWER_DOMAIN_AUDIO
         mediatek,etdm-in2-cowork-source = <2>;
         mediatek,etdm-out2-cowork-source = <0>;
@@ -184,7 +200,12 @@ examples:
                  <&topckgen 78>, //CLK_TOP_I2SO2
                  <&topckgen 79>, //CLK_TOP_I2SI1
                  <&topckgen 80>, //CLK_TOP_I2SI2
-                 <&adsp_audio26m 0>; //CLK_AUDIODSP_AUDIO26M
+                 <&adsp_audio26m 0>, //CLK_AUDIODSP_AUDIO26M
+                 <&topckgen 132>, //CLK_TOP_APLL1_D4
+                 <&topckgen 133>, //CLK_TOP_APLL2_D4
+                 <&topckgen 183>, //CLK_TOP_APLL12_CK_DIV4
+                 <&topckgen 84>, //CLK_TOP_A2SYS
+                 <&topckgen 82>; //CLK_TOP_AUD_IEC>;
         clock-names = "clk26m",
                       "apll1",
                       "apll2",
@@ -193,16 +214,21 @@ examples:
                       "apll12_div2",
                       "apll12_div3",
                       "apll12_div9",
-                      "a1sys_hp_sel",
-                      "aud_intbus_sel",
-                      "audio_h_sel",
-                      "audio_local_bus_sel",
-                      "dptx_m_sel",
-                      "i2so1_m_sel",
-                      "i2so2_m_sel",
-                      "i2si1_m_sel",
-                      "i2si2_m_sel",
-                      "adsp_audio_26m";
+                      "top_a1sys_hp",
+                      "top_aud_intbus",
+                      "top_audio_h",
+                      "top_audio_local_bus",
+                      "top_dptx",
+                      "top_i2so1",
+                      "top_i2so2",
+                      "top_i2si1",
+                      "top_i2si2",
+                      "adsp_audio_26m",
+                      "apll1_d4",
+                      "apll2_d4",
+                      "apll12_div4",
+                      "top_a2sys",
+                      "top_aud_iec";
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
index 6640272b3f4f6..05e532b5d50a6 100644
--- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: mediatek,mt8188-mt6359-evb
+    enum:
+      - mediatek,mt8188-mt6359-evb
+      - mediatek,mt8188-nau8825
 
   model:
     $ref: /schemas/types.yaml#/definitions/string
@@ -42,7 +44,6 @@ patternProperties:
           we are going to update parameters in this node.
         items:
           enum:
-            - ADDA_BE
             - DPTX_BE
             - ETDM1_IN_BE
             - ETDM2_IN_BE
@@ -62,11 +63,28 @@ patternProperties:
         required:
           - sound-dai
 
+      dai-format:
+        description: audio format.
+        items:
+          enum:
+            - i2s
+            - right_j
+            - left_j
+            - dsp_a
+            - dsp_b
+
+      mediatek,clk-provider:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Indicates dai-link clock master.
+        items:
+          enum:
+            - cpu
+            - codec
+
     additionalProperties: false
 
     required:
       - link-name
-      - codec
 
 additionalProperties: false
 
@@ -87,7 +105,8 @@ examples:
             "AIN1", "Headset Mic";
         dai-link-0 {
             link-name = "ETDM3_OUT_BE";
-
+            dai-format = "i2s";
+            mediatek,clk-provider = "cpu";
             codec {
                 sound-dai = <&hdmi0>;
             };
diff --git a/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml
index 9b40268537cb2..9aa65c975c4e3 100644
--- a/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml
+++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml
@@ -56,13 +56,9 @@ properties:
     items:
       items:
         - description: value for DS line
+          enum: [0, 1]
         - description: value for sampling edge
-      anyOf:
-        - enum:
-            - [0, 0]
-            - [0, 1]
-            - [1, 0]
-            - [1, 1]
+          enum: [0, 1]
     minItems: 1
     maxItems: 4
     uniqueItems: true
diff --git a/Documentation/devicetree/bindings/sound/nau8315.txt b/Documentation/devicetree/bindings/sound/nau8315.txt
deleted file mode 100644
index 1cd94517d45e0..0000000000000
--- a/Documentation/devicetree/bindings/sound/nau8315.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Nuvoton NAU8315 Mono Class-D Amplifier
-
-Required properties:
-- compatible   : "nuvoton,nau8315"
-                 "nuvoton,nau8318"
-
-Optional properties:
-- enable-gpios : GPIO specifier for the chip's device enable input(EN) pin.
-        If this option is not specified then driver does not manage
-        the pin state (e.g. chip is always on).
-
-Example:
-
-#include <dt-bindings/gpio/gpio.h>
-
-nau8315 {
-	compatible = "nuvoton,nau8315";
-	enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-};
-
-nau8318 {
-	compatible = "nuvoton,nau8318";
-	enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/sound/nau8540.txt b/Documentation/devicetree/bindings/sound/nau8540.txt
deleted file mode 100644
index 307a765283208..0000000000000
--- a/Documentation/devicetree/bindings/sound/nau8540.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-NAU85L40 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-  - compatible : "nuvoton,nau8540"
-
-  - reg : the I2C address of the device.
-
-Example:
-
-codec: nau8540@1c {
-       compatible = "nuvoton,nau8540";
-       reg = <0x1c>;
-};
diff --git a/Documentation/devicetree/bindings/sound/nau8810.txt b/Documentation/devicetree/bindings/sound/nau8810.txt
deleted file mode 100644
index 7deaa452b2002..0000000000000
--- a/Documentation/devicetree/bindings/sound/nau8810.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-NAU8810/NAU8812/NAU8814 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-  - compatible : One of "nuvoton,nau8810" or "nuvoton,nau8812" or
-	"nuvoton,nau8814"
-
-  - reg : the I2C address of the device.
-
-Example:
-
-codec: nau8810@1a {
-	compatible = "nuvoton,nau8810";
-	reg = <0x1a>;
-};
diff --git a/Documentation/devicetree/bindings/sound/nau8824.txt b/Documentation/devicetree/bindings/sound/nau8824.txt
deleted file mode 100644
index e0058b97e49a4..0000000000000
--- a/Documentation/devicetree/bindings/sound/nau8824.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-Nuvoton NAU8824 audio codec
-
-This device supports I2C only.
-
-Required properties:
-  - compatible : Must be "nuvoton,nau8824"
-
-  - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1).
-
-Optional properties:
-  - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low.
-
-  - nuvoton,vref-impedance: VREF Impedance selection
-      0 - Open
-      1 - 25 kOhm
-      2 - 125 kOhm
-      3 - 2.5 kOhm
-
-  - nuvoton,micbias-voltage: Micbias voltage level.
-      0 - VDDA
-      1 - VDDA
-      2 - VDDA * 1.1
-      3 - VDDA * 1.2
-      4 - VDDA * 1.3
-      5 - VDDA * 1.4
-      6 - VDDA * 1.53
-      7 - VDDA * 1.53
-
-  - nuvoton,sar-threshold-num: Number of buttons supported
-  - nuvoton,sar-threshold: Impedance threshold for each button. Array that contains up to 8 buttons configuration. SAR value is calculated as
-    SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R)
-    where MICBIAS is configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by 'nuvoton,sar-voltage', R - button impedance.
-    Refer datasheet section 10.2 for more information about threshold calculation.
-
-  - nuvoton,sar-hysteresis: Button impedance measurement hysteresis.
-
-  - nuvoton,sar-voltage: Reference voltage for button impedance measurement.
-      0 - VDDA
-      1 - VDDA
-      2 - VDDA * 1.1
-      3 - VDDA * 1.2
-      4 - VDDA * 1.3
-      5 - VDDA * 1.4
-      6 - VDDA * 1.53
-      7 - VDDA * 1.53
-
-  - nuvoton,sar-compare-time: SAR compare time
-      0 - 500 ns
-      1 - 1 us
-      2 - 2 us
-      3 - 4 us
-
-  - nuvoton,sar-sampling-time: SAR sampling time
-      0 - 2 us
-      1 - 4 us
-      2 - 8 us
-      3 - 16 us
-
-  - nuvoton,short-key-debounce: Button short key press debounce time.
-      0 - 30 ms
-      1 - 50 ms
-      2 - 100 ms
-
-  - nuvoton,jack-eject-debounce: Jack ejection debounce time.
-      0 - 0 ms
-      1 - 1 ms
-      2 - 10 ms
-
-
-Example:
-
-  headset: nau8824@1a {
-      compatible = "nuvoton,nau8824";
-      reg = <0x1a>;
-      interrupt-parent = <&gpio>;
-      interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
-      nuvoton,vref-impedance = <2>;
-      nuvoton,micbias-voltage = <6>;
-      // Setup 4 buttons impedance according to Android specification
-      nuvoton,sar-threshold-num = <4>;
-      nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
-      nuvoton,sar-hysteresis = <0>;
-      nuvoton,sar-voltage = <6>;
-      nuvoton,sar-compare-time = <1>;
-      nuvoton,sar-sampling-time = <1>;
-      nuvoton,short-key-debounce = <0>;
-      nuvoton,jack-eject-debounce = <1>;
-  };
diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt
deleted file mode 100644
index a9c34526f4cb0..0000000000000
--- a/Documentation/devicetree/bindings/sound/nau8825.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-Nuvoton NAU8825 audio codec
-
-This device supports I2C only.
-
-Required properties:
-  - compatible : Must be "nuvoton,nau8825"
-
-  - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1).
-
-Optional properties:
-  - nuvoton,jkdet-enable: Enable jack detection via JKDET pin.
-  - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled,
-      otherwise pin in high impedance state.
-  - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down.
-  - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low.
-
-  - nuvoton,vref-impedance: VREF Impedance selection
-      0 - Open
-      1 - 25 kOhm
-      2 - 125 kOhm
-      3 - 2.5 kOhm
-
-  - nuvoton,micbias-voltage: Micbias voltage level.
-      0 - VDDA
-      1 - VDDA
-      2 - VDDA * 1.1
-      3 - VDDA * 1.2
-      4 - VDDA * 1.3
-      5 - VDDA * 1.4
-      6 - VDDA * 1.53
-      7 - VDDA * 1.53
-
-  - nuvoton,sar-threshold-num: Number of buttons supported
-  - nuvoton,sar-threshold: Impedance threshold for each button. Array that contains up to 8 buttons configuration. SAR value is calculated as
-    SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R)
-    where MICBIAS is configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by 'nuvoton,sar-voltage', R - button impedance.
-    Refer datasheet section 10.2 for more information about threshold calculation.
-
-  - nuvoton,sar-hysteresis: Button impedance measurement hysteresis.
-
-  - nuvoton,sar-voltage: Reference voltage for button impedance measurement.
-      0 - VDDA
-      1 - VDDA
-      2 - VDDA * 1.1
-      3 - VDDA * 1.2
-      4 - VDDA * 1.3
-      5 - VDDA * 1.4
-      6 - VDDA * 1.53
-      7 - VDDA * 1.53
-
-  - nuvoton,sar-compare-time: SAR compare time
-      0 - 500 ns
-      1 - 1 us
-      2 - 2 us
-      3 - 4 us
-
-  - nuvoton,sar-sampling-time: SAR sampling time
-      0 - 2 us
-      1 - 4 us
-      2 - 8 us
-      3 - 16 us
-
-  - nuvoton,short-key-debounce: Button short key press debounce time.
-      0 - 30 ms
-      1 - 50 ms
-      2 - 100 ms
-      3 - 30 ms
-
-  - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
-  - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
-
-  - nuvoton,crosstalk-enable: make crosstalk function enable if set.
-
-  - nuvoton,adcout-drive-strong: make the drive strength of ADCOUT IO PIN strong if set.
-      Otherwise, the drive keeps normal strength.
-
-  - nuvoton,adc-delay-ms: Delay (in ms) to make input path stable and avoid pop noise. The
-      default value is 125 and range between 125 to 500 ms.
-
-  - clocks: list of phandle and clock specifier pairs according to common clock bindings for the
-      clocks described in clock-names
-  - clock-names: should include "mclk" for the MCLK master clock
-
-Example:
-
-  headset: nau8825@1a {
-      compatible = "nuvoton,nau8825";
-      reg = <0x1a>;
-      interrupt-parent = <&gpio>;
-      interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
-      nuvoton,jkdet-enable;
-      nuvoton,jkdet-pull-enable;
-      nuvoton,jkdet-pull-up;
-      nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
-      nuvoton,vref-impedance = <2>;
-      nuvoton,micbias-voltage = <6>;
-      // Setup 4 buttons impedance according to Android specification
-      nuvoton,sar-threshold-num = <4>;
-      nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
-      nuvoton,sar-hysteresis = <1>;
-      nuvoton,sar-voltage = <0>;
-      nuvoton,sar-compare-time = <0>;
-      nuvoton,sar-sampling-time = <0>;
-      nuvoton,short-key-debounce = <2>;
-      nuvoton,jack-insert-debounce = <7>;
-      nuvoton,jack-eject-debounce = <7>;
-      nuvoton,crosstalk-enable;
-
-      clock-names = "mclk";
-      clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_2>;
-  };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml
new file mode 100644
index 0000000000000..24006e9dc501c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8315.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8315/NAU8318 Mono Class-D Amplifier
+
+maintainers:
+  - David Lin <CTLIN0@nuvoton.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nau8315
+      - nuvoton,nau8318
+
+  '#sound-dai-cells':
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      GPIO specifier for the chip's device enable input(EN) pin.
+      If this option is not specified then driver does not manage
+      the pin state (e.g. chip is always on).
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    codec {
+        compatible = "nuvoton,nau8315";
+        #sound-dai-cells = <0>;
+        enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml
new file mode 100644
index 0000000000000..7ccfbb8d8b043
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8540.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton Technology Corporation NAU85L40 Audio CODEC
+
+maintainers:
+  - John Hsu <KCHSU0@nuvoton.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: nuvoton,nau8540
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1c {
+            compatible = "nuvoton,nau8540";
+            reg = <0x1c>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml
new file mode 100644
index 0000000000000..d9696f6c75edd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8810/NAU8812/NAU8814 audio CODEC
+
+maintainers:
+  - David Lin <CTLIN0@nuvoton.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nau8810
+      - nuvoton,nau8812
+      - nuvoton,nau8814
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            #sound-dai-cells = <0>;
+            compatible = "nuvoton,nau8810";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml
new file mode 100644
index 0000000000000..3dbf438c38410
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8824.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8824 audio CODEC
+
+maintainers:
+  - John Hsu <KCHSU0@nuvoton.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nau8824
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  nuvoton,jkdet-polarity:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      JKDET pin polarity.
+    enum:
+      - 0 # active high
+      - 1 # active low
+    default: 1
+
+  nuvoton,vref-impedance:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      VREF Impedance selection.
+    enum:
+      - 0 # Open
+      - 1 # 25 kOhm
+      - 2 # 125 kOhm
+      - 3 # 2.5 kOhm
+    default: 2
+
+  nuvoton,micbias-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Micbias voltage level.
+    enum:
+      - 0 # VDDA
+      - 1 # VDDA
+      - 2 # VDDA * 1.1
+      - 3 # VDDA * 1.2
+      - 4 # VDDA * 1.3
+      - 5 # VDDA * 1.4
+      - 6 # VDDA * 1.53
+      - 7 # VDDA * 1.53
+    default: 6
+
+  nuvoton,sar-threshold-num:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of buttons supported.
+    minimum: 1
+    maximum: 8
+    default: 4
+
+  nuvoton,sar-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Impedance threshold for each button. Array that contains up to 8 buttons
+      configuration. SAR value is calculated as
+      SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) where MICBIAS is
+      configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by
+      'nuvoton,sar-voltage', R - button impedance.
+      Refer datasheet section 10.2 for more information about threshold
+      calculation.
+    minItems: 1
+    maxItems: 8
+    items:
+      minimum: 0
+      maximum: 255
+
+  nuvoton,sar-hysteresis:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Button impedance measurement hysteresis.
+    default: 0
+
+  nuvoton,sar-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Reference voltage for button impedance measurement.
+    enum:
+      - 0 # VDDA
+      - 1 # VDDA
+      - 2 # VDDA * 1.1
+      - 3 # VDDA * 1.2
+      - 4 # VDDA * 1.3
+      - 5 # VDDA * 1.4
+      - 6 # VDDA * 1.53
+      - 7 # VDDA * 1.53
+    default: 6
+
+  nuvoton,sar-compare-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      SAR compare time.
+    enum:
+      - 0 # 500ns
+      - 1 # 1us
+      - 2 # 2us
+      - 3 # 4us
+    default: 1
+
+  nuvoton,sar-sampling-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      SAR sampling time.
+    enum:
+      - 0 # 2us
+      - 1 # 4us
+      - 2 # 8us
+      - 3 # 16us
+    default: 1
+
+  nuvoton,short-key-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Button short key press debounce time.
+    enum:
+      - 0 # 30 ms
+      - 1 # 50 ms
+      - 2 # 100 ms
+    default: 0
+
+  nuvoton,jack-eject-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Jack ejection debounce time.
+    enum:
+      - 0 # 0 ms
+      - 1 # 1 ms
+      - 2 # 10 ms
+    default: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            #sound-dai-cells = <0>;
+            compatible = "nuvoton,nau8824";
+            reg = <0x1a>;
+            interrupt-parent = <&gpio>;
+            interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+            nuvoton,vref-impedance = <2>;
+            nuvoton,micbias-voltage = <6>;
+            nuvoton,sar-threshold-num = <4>;
+            // Setup 4 buttons impedance according to Android specification
+            nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
+            nuvoton,sar-hysteresis = <0>;
+            nuvoton,sar-voltage = <6>;
+            nuvoton,sar-compare-time = <1>;
+            nuvoton,sar-sampling-time = <1>;
+            nuvoton,short-key-debounce = <0>;
+            nuvoton,jack-eject-debounce = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml
new file mode 100644
index 0000000000000..a54f194a0b492
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml
@@ -0,0 +1,239 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8825.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8825 audio CODEC
+
+maintainers:
+  - John Hsu <KCHSU0@nuvoton.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nau8825
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nuvoton,jkdet-enable:
+    description:
+      Enable jack detection via JKDET pin.
+    type: boolean
+
+  nuvoton,jkdet-pull-enable:
+    description:
+      Enable JKDET pin pull.
+      If set - pin pull enabled, otherwise pin in high impedance state.
+    type: boolean
+
+  nuvoton,jkdet-pull-up:
+    description:
+      Pull-up JKDET pin.
+      If set then JKDET pin is pull up, otherwise pull down.
+    type: boolean
+
+  nuvoton,jkdet-polarity:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      JKDET pin polarity.
+    enum:
+      - 0 # active high
+      - 1 # active low
+    default: 1
+
+  nuvoton,vref-impedance:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      VREF Impedance selection.
+    enum:
+      - 0 # Open
+      - 1 # 25 kOhm
+      - 2 # 125 kOhm
+      - 3 # 2.5 kOhm
+    default: 2
+
+  nuvoton,micbias-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Micbias voltage level.
+    enum:
+      - 0 # VDDA
+      - 1 # VDDA
+      - 2 # VDDA * 1.1
+      - 3 # VDDA * 1.2
+      - 4 # VDDA * 1.3
+      - 5 # VDDA * 1.4
+      - 6 # VDDA * 1.53
+      - 7 # VDDA * 1.53
+    default: 6
+
+  nuvoton,sar-threshold-num:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of buttons supported.
+    minimum: 1
+    maximum: 4
+    default: 4
+
+  nuvoton,sar-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Impedance threshold for each button. Array that contains up to 8 buttons
+      configuration. SAR value is calculated as
+      SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) where MICBIAS is
+      configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by
+      'nuvoton,sar-voltage', R - button impedance.
+      Refer datasheet section 10.2 for more information about threshold
+      calculation.
+    minItems: 1
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 255
+
+  nuvoton,sar-hysteresis:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Button impedance measurement hysteresis.
+    default: 0
+
+  nuvoton,sar-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Reference voltage for button impedance measurement.
+    enum:
+      - 0 # VDDA
+      - 1 # VDDA
+      - 2 # VDDA * 1.1
+      - 3 # VDDA * 1.2
+      - 4 # VDDA * 1.3
+      - 5 # VDDA * 1.4
+      - 6 # VDDA * 1.53
+      - 7 # VDDA * 1.53
+    default: 6
+
+  nuvoton,sar-compare-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      SAR compare time.
+    enum:
+      - 0 # 500 ns
+      - 1 # 1 us
+      - 2 # 2 us
+      - 3 # 4 us
+    default: 1
+
+  nuvoton,sar-sampling-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      SAR sampling time.
+    enum:
+      - 0 # 2 us
+      - 1 # 4 us
+      - 2 # 8 us
+      - 3 # 16 us
+    default: 1
+
+  nuvoton,short-key-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Button short key press debounce time.
+    enum:
+      - 0 # 30 ms
+      - 1 # 50 ms
+      - 2 # 100 ms
+      - 3 # 30 ms
+    default: 3
+
+  nuvoton,jack-insert-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      number from 0 to 7 that sets debounce time to 2^(n+2) ms.
+    maximum: 7
+    default: 7
+
+  nuvoton,jack-eject-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      number from 0 to 7 that sets debounce time to 2^(n+2) ms
+    maximum: 7
+    default: 0
+
+  nuvoton,crosstalk-enable:
+    description:
+      make crosstalk function enable if set.
+    type: boolean
+
+  nuvoton,adcout-drive-strong:
+    description:
+      make the drive strength of ADCOUT IO PIN strong if set.
+      Otherwise, the drive keeps normal strength.
+    type: boolean
+
+  nuvoton,adc-delay-ms:
+    description:
+      Delay (in ms) to make input path stable and avoid pop noise.
+      The default value is 125 and range between 125 to 500 ms.
+    minimum: 125
+    maximum: 500
+    default: 125
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            #sound-dai-cells = <0>;
+            compatible = "nuvoton,nau8825";
+            reg = <0x1a>;
+            interrupt-parent = <&gpio>;
+            interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+            nuvoton,jkdet-enable;
+            nuvoton,jkdet-pull-enable;
+            nuvoton,jkdet-pull-up;
+            nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+            nuvoton,vref-impedance = <2>;
+            nuvoton,micbias-voltage = <6>;
+            // Setup 4 buttons impedance according to Android specification
+            nuvoton,sar-threshold-num = <4>;
+            nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
+            nuvoton,sar-hysteresis = <1>;
+            nuvoton,sar-voltage = <0>;
+            nuvoton,sar-compare-time = <0>;
+            nuvoton,sar-sampling-time = <0>;
+            nuvoton,short-key-debounce = <2>;
+            nuvoton,jack-insert-debounce = <7>;
+            nuvoton,jack-eject-debounce = <7>;
+            nuvoton,crosstalk-enable;
+
+            clock-names = "mclk";
+            clocks = <&tegra_pmc 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml
index 7c1e9895ce858..2588589ad62d3 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Common properties for NVIDIA Tegra audio complexes
 
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
index 6cc8f86c75317..3a559bd07a79b 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -8,7 +8,7 @@ title: Qualcomm Technologies Inc. LPASS CPU dai driver
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-  - Rohit kumar <rohitkr@codeaurora.org>
+  - Rohit kumar <quic_rohkumar@quicinc.com>
 
 description: |
   Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
index cdbb4096fa44f..9e5b30d9c6e62 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Audio Process Manager Digital Audio Interfaces
 
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
index 1168410f6fbd7..3552c44137ed2 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm DSP LPASS Clock Controller
 
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
index 044e77718a1bf..08c618e7e4281 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports
 
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
new file mode 100644
index 0000000000000..e6723c9e312a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa8840.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WSA8840/WSA8845/WSA8845H smart speaker amplifier
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  WSA884X is a family of Qualcomm Aqstic smart speaker amplifiers using
+  SoundWire digital audio interface.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: sdw20217020400
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description: Powerdown/Shutdown line to use (pin SD_N)
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  vdd-1p8-supply: true
+  vdd-io-supply: true
+
+required:
+  - compatible
+  - reg
+  - powerdown-gpios
+  - '#sound-dai-cells'
+  - vdd-1p8-supply
+  - vdd-io-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    soundwire-controller {
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        speaker@0,1 {
+            compatible = "sdw20217020400";
+            reg = <0 1>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&spkr_2_sd_n_active>;
+            powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
+            #sound-dai-cells = <0>;
+            sound-name-prefix = "SpkrRight";
+            vdd-1p8-supply = <&vreg_l15b_1p8>;
+            vdd-io-supply = <&vreg_l3g_1p2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml
new file mode 100644
index 0000000000000..5287e9c9197e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt1016.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Reaktek RT1016 Stereo Class D Audio Amplifier
+
+maintainers:
+  - oder_chiou@realtek.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: realtek,rt1016
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            compatible = "realtek,rt1016";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/rt1016.txt b/Documentation/devicetree/bindings/sound/rt1016.txt
deleted file mode 100644
index 2310f8ff259bc..0000000000000
--- a/Documentation/devicetree/bindings/sound/rt1016.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-RT1016 Stereo Class D Audio Amplifier
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : "realtek,rt1016".
-
-- reg : The I2C address of the device.
-
-
-Example:
-
-rt1016: codec@1a {
-	compatible = "realtek,rt1016";
-	reg = <0x1a>;
-};
diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
index 56e623d4e168f..a970fd264b213 100644
--- a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
@@ -36,7 +36,8 @@ properties:
     const: i2sclk
 
   resets:
-    maxItems: 1
+    items:
+      - description: Optional controller resets
 
   dmas:
     items:
diff --git a/Documentation/devicetree/bindings/sound/ssm2518.txt b/Documentation/devicetree/bindings/sound/ssm2518.txt
deleted file mode 100644
index 59381a778c797..0000000000000
--- a/Documentation/devicetree/bindings/sound/ssm2518.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-SSM2518 audio amplifier
-
-This device supports I2C only.
-
-Required properties:
-  - compatible : Must be "adi,ssm2518"
-  - reg : the I2C address of the device. This will either be 0x34 (ADDR pin low)
-	or 0x35 (ADDR pin high)
-
-Optional properties:
-  - gpios : GPIO connected to the nSD pin. If the property is not present it is
-	        assumed that the nSD pin is hardwired to always on.
-
-Example:
-
-	ssm2518: ssm2518@34 {
-		compatible = "adi,ssm2518";
-		reg = <0x34>;
-		gpios = <&gpio 5 0>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
index a040d4d314120..b9111d375b93f 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
@@ -61,6 +61,10 @@ properties:
     description: Configure the I2S device as MCLK clock provider.
     const: 0
 
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - "#sound-dai-cells"
@@ -89,6 +93,13 @@ examples:
         dma-names = "rx", "tx";
         pinctrl-names = "default";
         pinctrl-0 = <&i2s2_pins_a>;
+
+        /* assume audio-graph */
+        port {
+            codec_endpoint: endpoint {
+                remote-endpoint = <&codec_endpoint>;
+            };
+        };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml b/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
new file mode 100644
index 0000000000000..abb373fbfa269
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/starfive,jh7110-tdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 TDM Controller
+
+description: |
+  The TDM Controller is a Time Division Multiplexed audio interface
+  integrated in StarFive JH7110 SoC, allowing up to 8 channels of
+  audio over a serial interface. The TDM controller can operate both
+  in master and slave mode.
+
+maintainers:
+  - Walker Chen <walker.chen@starfivetech.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7110-tdm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: TDM AHB Clock
+      - description: TDM APB Clock
+      - description: TDM Internal Clock
+      - description: TDM Clock
+      - description: Inner MCLK
+      - description: TDM External Clock
+
+  clock-names:
+    items:
+      - const: tdm_ahb
+      - const: tdm_apb
+      - const: tdm_internal
+      - const: tdm
+      - const: mclk_inner
+      - const: tdm_ext
+
+  resets:
+    items:
+      - description: tdm ahb reset line
+      - description: tdm apb reset line
+      - description: tdm core reset line
+
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    tdm@10090000 {
+        compatible = "starfive,jh7110-tdm";
+        reg = <0x10090000 0x1000>;
+        clocks = <&syscrg 184>,
+                 <&syscrg 185>,
+                 <&syscrg 186>,
+                 <&syscrg 187>,
+                 <&syscrg 17>,
+                 <&tdm_ext>;
+        clock-names = "tdm_ahb", "tdm_apb",
+                      "tdm_internal", "tdm",
+                      "mclk_inner", "tdm_ext";
+        resets = <&syscrg 105>,
+                 <&syscrg 107>,
+                 <&syscrg 106>;
+        dmas = <&dma 20>, <&dma 21>;
+        dma-names = "rx","tx";
+        #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml
index 31a3024ea7898..f01c0dde0cf74 100644
--- a/Documentation/devicetree/bindings/sound/tas2562.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2019 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/sound/tas2562.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/tas2562.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments TAS2562 Smart PA
 
diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
index 8908bf1122e96..be2536e8c4403 100644
--- a/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2019-20 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/sound/tas2770.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/tas2770.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments TAS2770 Smart PA
 
diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml
index a876545ec87d8..f2d878f6f4959 100644
--- a/Documentation/devicetree/bindings/sound/tas27xx.yaml
+++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2020-2022 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/sound/tas27xx.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/tas27xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments TAS2764/TAS2780 Smart PA
 
diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
new file mode 100644
index 0000000000000..8d60e4e236d65
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 - 2023 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TAS2781 SmartAMP
+
+maintainers:
+  - Shenghao Ding <shenghao-ding@ti.com>
+
+description:
+  The TAS2781 is a mono, digital input Class-D audio amplifier
+  optimized for efficiently driving high peak power into small
+  loudspeakers. An integrated on-chip DSP supports Texas Instruments
+  Smart Amp speaker protection algorithm. The integrated speaker
+  voltage and current sense provides for real time
+  monitoring of loudspeaker behavior.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2781
+
+  reg:
+    description:
+      I2C address, in multiple tas2781s case, all the i2c address
+      aggreate as one Audio Device to support multiple audio slots.
+    maxItems: 8
+    minItems: 1
+    items:
+      minimum: 0x38
+      maximum: 0x3f
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   i2c {
+     /* example with quad tas2781s, such as tablet or pad device */
+     #address-cells = <1>;
+     #size-cells = <0>;
+     quad_tas2781: tas2781@38 {
+       compatible = "ti,tas2781";
+       reg = <0x38>, /* Audio slot 0 */
+             <0x3a>, /* Audio slot 1 */
+             <0x39>, /* Audio slot 2 */
+             <0x3b>; /* Audio slot 3 */
+
+       #sound-dai-cells = <0>;
+       reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <15>;
+     };
+   };
+...
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
new file mode 100644
index 0000000000000..a7cc9aa344684
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tlv320aic32x4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320AIC32x4 Stereo Audio codec
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+description: |
+  The TLV320AIC32x4 audio codec can be accessed using I2C or SPI
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2505
+      - ti,tlv320aic32x4
+      - ti,tlv320aic32x6
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Master clock
+
+  clock-names:
+    items:
+      - const: mclk
+
+  av-supply:
+    description: Analog core power supply
+
+  dv-supply:
+    description: Digital core power supply
+
+  iov-supply:
+    description: Digital IO power supply
+
+  ldoin-supply:
+    description: LDO power supply
+
+  reset-gpios:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  aic32x4-gpio-func:
+    description: |
+       GPIO function configuration for pins MFP1-MFP5.
+       Types are defined in include/sound/tlv320aic32x4.h
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 5
+    maxItems: 5
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - iov-supply
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      not:
+        required:
+          - ldoin-supply
+    then:
+      required:
+        - av-supply
+        - dv-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      audio-codec@18 {
+        compatible = "ti,tlv320aic32x4";
+        reg = <0x18>;
+        iov-supply = <&reg_3v3>;
+        ldoin-supply = <&reg_3v3>;
+        clocks = <&clks 201>;
+        clock-names = "mclk";
+        aic32x4-gpio-func= <
+          0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
+          0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
+          0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */
+          0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
+          0x08 /* MFP5 AIC32X4_MFP5_GPIO_INPUT */
+        >;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml
index e8ca9f3369f8e..206f6d61e362e 100644
--- a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml
@@ -61,6 +61,7 @@ properties:
       GPIO specification for the active low RESET input.
 
   gpio-reset:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
     maxItems: 1
     description:
       Deprecated, please use reset-gpios instead.
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
deleted file mode 100644
index 0b4e21bde5bc1..0000000000000
--- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Texas Instruments - tlv320aic32x4 Codec module
-
-The tlv320aic32x4 serial control bus communicates through I2C protocols
-
-Required properties:
- - compatible - "string" - One of:
-	"ti,tlv320aic32x4" TLV320AIC3204
-	"ti,tlv320aic32x6" TLV320AIC3206, TLV320AIC3256
-	"ti,tas2505" TAS2505, TAS2521
- - reg: I2C slave address
- - *-supply: Required supply regulators are:
-    "iov" - digital IO power supply
-    "ldoin" - LDO power supply
-    "dv" - Digital core power supply
-    "av" - Analog core power supply
-    If you supply ldoin, dv and av are optional. Otherwise they are required
-   See regulator/regulator.txt for more information about the detailed binding
-   format.
-
-Optional properties:
- - reset-gpios: Reset-GPIO phandle with args as described in gpio/gpio.txt
- - clocks/clock-names: Clock named 'mclk' for the master clock of the codec.
-   See clock/clock-bindings.txt for information about the detailed format.
- - aic32x4-gpio-func - <array of 5 int>
-	- Types are defined in include/sound/tlv320aic32x4.h
-
-
-Example:
-
-codec: tlv320aic32x4@18 {
-	compatible = "ti,tlv320aic32x4";
-	reg = <0x18>;
-	clocks = <&clks 201>;
-	clock-names = "mclk";
-	aic32x4-gpio-func= <
-			0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
-			0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
-			0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */
-			0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
-			0x08 /* MFP5 AIC32X4_MFP5_GPIO_INPUT */
-		>;
-};
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
index 7105ed5fd6c7a..4cfa66f626817 100644
--- a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/sound/wlf,wm8903.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/wlf,wm8903.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: WM8903 audio codec
 
diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
index e4dba825ab117..fb44b89a754ec 100644
--- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
+++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
@@ -21,6 +21,7 @@ properties:
       - qcom,soundwire-v1.5.1
       - qcom,soundwire-v1.6.0
       - qcom,soundwire-v1.7.0
+      - qcom,soundwire-v2.0.0
 
   reg:
     maxItems: 1
@@ -80,18 +81,29 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
 
   qcom,ports-sinterval-low:
     $ref: /schemas/types.yaml#/definitions/uint8-array
     description:
-      Sample interval low of each data port.
+      Sample interval (only lowest byte) of each data port.
       Out ports followed by In ports. Used for Sample Interval calculation.
       Value of 0xff indicates that this option is not implemented
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
+
+  qcom,ports-sinterval:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description:
+      Sample interval of each data port.
+      Out ports followed by In ports. Used for Sample Interval calculation.
+      Value of 0xffff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
 
   qcom,ports-offset1:
     $ref: /schemas/types.yaml#/definitions/uint8-array
@@ -102,7 +114,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
 
   qcom,ports-offset2:
     $ref: /schemas/types.yaml#/definitions/uint8-array
@@ -113,7 +125,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
 
   qcom,ports-lane-control:
     $ref: /schemas/types.yaml#/definitions/uint8-array
@@ -124,7 +136,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
 
   qcom,ports-block-pack-mode:
     $ref: /schemas/types.yaml#/definitions/uint8-array
@@ -137,7 +149,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
     items:
       oneOf:
         - minimum: 0
@@ -154,7 +166,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
     items:
       oneOf:
         - minimum: 0
@@ -171,7 +183,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
     items:
       oneOf:
         - minimum: 0
@@ -187,7 +199,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
     items:
       oneOf:
         - minimum: 0
@@ -219,10 +231,15 @@ required:
   - '#size-cells'
   - qcom,dout-ports
   - qcom,din-ports
-  - qcom,ports-sinterval-low
   - qcom,ports-offset1
   - qcom,ports-offset2
 
+oneOf:
+  - required:
+      - qcom,ports-sinterval-low
+  - required:
+      - qcom,ports-sinterval
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
index 2155478bfc4de..a6f34bdd1d3c3 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
@@ -14,9 +14,6 @@ maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
 properties:
-  "#address-cells": true
-  "#size-cells": true
-
   compatible:
     const: allwinner,sun4i-a10-spi
 
@@ -46,12 +43,9 @@ properties:
       - const: rx
       - const: tx
 
-  num-cs: true
-
 patternProperties:
   "^.*@[0-9a-f]+":
     type: object
-    additionalProperties: true
     properties:
       reg:
         items:
@@ -71,7 +65,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
index de36c6a34a0f6..28b8ace63044b 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
@@ -14,11 +14,9 @@ maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
 properties:
-  "#address-cells": true
-  "#size-cells": true
-
   compatible:
     oneOf:
+      - const: allwinner,sun50i-r329-spi
       - const: allwinner,sun6i-a31-spi
       - const: allwinner,sun8i-h3-spi
       - items:
@@ -28,6 +26,15 @@ properties:
               - allwinner,sun50i-h616-spi
               - allwinner,suniv-f1c100s-spi
           - const: allwinner,sun8i-h3-spi
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-spi
+              - allwinner,sun50i-r329-spi-dbi
+          - const: allwinner,sun50i-r329-spi
+      - items:
+          - const: allwinner,sun20i-d1-spi-dbi
+          - const: allwinner,sun50i-r329-spi-dbi
+          - const: allwinner,sun50i-r329-spi
 
   reg:
     maxItems: 1
@@ -58,12 +65,9 @@ properties:
       - const: rx
       - const: tx
 
-  num-cs: true
-
 patternProperties:
   "^.*@[0-9a-f]+":
     type: object
-    additionalProperties: true
     properties:
       reg:
         items:
@@ -83,7 +87,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
index 6c57dd6c3a361..58367587bfbc2 100644
--- a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
@@ -20,6 +20,10 @@ properties:
       - items:
           - const: microchip,sam9x60-spi
           - const: atmel,at91rm9200-spi
+      - items:
+          - const: microchip,sam9x7-spi
+          - const: microchip,sam9x60-spi
+          - const: atmel,at91rm9200-spi
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
index b310069762dd5..4f15f9a0cc34a 100644
--- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
@@ -46,12 +46,28 @@ allOf:
           maxItems: 2
           items:
             enum: [ qspi, qspi-ocp ]
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: amd,pensando-elba-qspi
+    then:
+      properties:
+        cdns,fifo-depth:
+          enum: [ 128, 256, 1024 ]
+          default: 1024
+    else:
+      properties:
+        cdns,fifo-depth:
+          enum: [ 128, 256 ]
+          default: 128
 
 properties:
   compatible:
     oneOf:
       - items:
           - enum:
+              - amd,pensando-elba-qspi
               - ti,k2g-qspi
               - ti,am654-ospi
               - intel,lgm-qspi
@@ -76,8 +92,6 @@ properties:
     description:
       Size of the data FIFO in words.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 128, 256 ]
-    default: 128
 
   cdns,fifo-width:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index ee8f7ea907b0b..1696ac46a660e 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -29,6 +29,9 @@ properties:
   reg:
     maxItems: 1
 
+  iommus:
+    maxItems: 1
+
   interrupts:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml
new file mode 100644
index 0000000000000..e59183e53690b
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,rzv2m-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M Clocked Serial Interface (CSI)
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: renesas,rzv2m-csi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The clock used to generate the output clock (CSICLK)
+      - description: Internal clock to access the registers (PCLK)
+
+  clock-names:
+    items:
+      - const: csiclk
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a09g011-cpg.h>
+    csi4: spi@a4020200 {
+        compatible = "renesas,rzv2m-csi";
+        reg = <0xa4020200 0x80>;
+        interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A09G011_CSI4_CLK>,
+                 <&cpg CPG_MOD R9A09G011_CPERI_GRPH_PCLK>;
+        clock-names = "csiclk", "pclk";
+        resets = <&cpg R9A09G011_CSI_GPH_PRESETN>;
+        power-domains = <&cpg>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml
index e0a465d70b0a4..79da99ca0e53e 100644
--- a/Documentation/devicetree/bindings/spi/samsung,spi.yaml
+++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml
@@ -35,8 +35,6 @@ properties:
     minItems: 2
     maxItems: 3
 
-  cs-gpios: true
-
   dmas:
     minItems: 2
     maxItems: 2
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
index 12ca108864c6e..a47cb144b09f2 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
@@ -74,6 +74,8 @@ properties:
         const: intel,keembay-ssi
       - description: Intel Thunder Bay SPI Controller
         const: intel,thunderbay-ssi
+      - description: Intel Mount Evans Integrated Management Complex SPI Controller
+        const: intel,mountevans-imc-ssi
       - description: AMD Pensando Elba SoC SPI Controller
         const: amd,pensando-elba-spi
       - description: Baikal-T1 SPI Controller
diff --git a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
index 597fc4e6b01ca..c96131ebbea1d 100644
--- a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
@@ -17,9 +17,6 @@ allOf:
   - $ref: spi-controller.yaml#
 
 properties:
-  "#address-cells": true
-  "#size-cells": true
-
   compatible:
     const: socionext,uniphier-scssi
 
diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
index b0f83b5c2cdd8..b7552739b5545 100644
--- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Cadence SPI controller
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 allOf:
   - $ref: spi-controller.yaml#
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 90945f59b7e8b..524f6fe8c27b4 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -17,7 +17,7 @@ description: |
 
 properties:
   $nodename:
-    pattern: "^spi(@.*|-[0-9a-f])*$"
+    pattern: "^spi(@.*|-([0-9]|[1-9][0-9]+))?$"
 
   "#address-cells":
     enum: [0, 1]
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
index 6bd83836edede..4beb3af0416de 100644
--- a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx SPI controller
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 allOf:
   - $ref: spi-controller.yaml#
diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
index 20f77246d3658..e5199b109dad9 100644
--- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx Zynq UltraScale+ MPSoC GQSPI controller
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 allOf:
   - $ref: spi-controller.yaml#
@@ -32,6 +32,12 @@ properties:
   clocks:
     maxItems: 2
 
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
index 83e8fb4a548df..7ea8fb42ce2c0 100644
--- a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
@@ -14,7 +14,7 @@ allOf:
   - $ref: spi-controller.yaml#
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 # Everything else is described in the common file
 properties:
diff --git a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
index abcbbe13723fb..ac99883a3f295 100644
--- a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
+++ b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
@@ -14,13 +14,18 @@ description: |+
   for multiple SoCs to control a single SPMI master.
 
 allOf:
-  - $ref: "spmi.yaml"
+  - $ref: spmi.yaml
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt6873-spmi
-      - mediatek,mt8195-spmi
+    oneOf:
+      - enum:
+          - mediatek,mt6873-spmi
+          - mediatek,mt8195-spmi
+      - items:
+          - enum:
+              - mediatek,mt8186-spmi
+          - const: mediatek,mt8195-spmi
 
   reg:
     maxItems: 2
diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
index 0548e8e0d30be..8025a852bc9c1 100644
--- a/Documentation/devicetree/bindings/sram/qcom,imem.yaml
+++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
@@ -18,8 +18,10 @@ properties:
     items:
       - enum:
           - qcom,apq8064-imem
+          - qcom,msm8226-imem
           - qcom,msm8974-imem
           - qcom,qcs404-imem
+          - qcom,qdu1000-imem
           - qcom,sc7180-imem
           - qcom,sc7280-imem
           - qcom,sdm630-imem
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
index 993430be355b4..0922d1f71ba8a 100644
--- a/Documentation/devicetree/bindings/sram/sram.yaml
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -94,6 +94,7 @@ patternProperties:
             - samsung,exynos4210-sysram
             - samsung,exynos4210-sysram-ns
             - socionext,milbeaut-smp-sram
+            - stericsson,u8500-esram
 
       reg:
         description:
diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
index b0bee7e420387..ab8b8fccc7afb 100644
--- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
@@ -8,6 +8,7 @@ Required properties:
     * marvell,armada380-thermal
     * marvell,armadaxp-thermal
     * marvell,armada-ap806-thermal
+    * marvell,armada-ap807-thermal
     * marvell,armada-cp110-thermal
 
 Note: these bindings are deprecated for AP806/CP110 and should instead
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
deleted file mode 100644
index a3e9ec5dc7ac4..0000000000000
--- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Binding for Thermal Sensor driver for BCM2835 SoCs.
-
-Required parameters:
--------------------
-
-compatible: 		should be one of: "brcm,bcm2835-thermal",
-			"brcm,bcm2836-thermal" or "brcm,bcm2837-thermal"
-reg:			Address range of the thermal registers.
-clocks: 		Phandle of the clock used by the thermal sensor.
-#thermal-sensor-cells:	should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml)
-
-Example:
-
-thermal-zones {
-	cpu_thermal: cpu-thermal {
-		polling-delay-passive = <0>;
-		polling-delay = <1000>;
-
-		thermal-sensors = <&thermal>;
-
-		trips {
-			cpu-crit {
-				temperature	= <80000>;
-				hysteresis	= <0>;
-				type		= "critical";
-			};
-		};
-
-		coefficients = <(-538)	407000>;
-
-		cooling-maps {
-		};
-	};
-};
-
-thermal: thermal@7e212000 {
-	compatible = "brcm,bcm2835-thermal";
-	reg = <0x7e212000 0x8>;
-	clocks = <&clocks BCM2835_CLOCK_TSENS>;
-	#thermal-sensor-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
new file mode 100644
index 0000000000000..2b6026d9fbcf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,bcm2835-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 thermal sensor
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-thermal
+      - brcm,bcm2836-thermal
+      - brcm,bcm2837-thermal
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#thermal-sensor-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    thermal@7e212000 {
+      compatible = "brcm,bcm2835-thermal";
+      reg = <0x7e212000 0x8>;
+      clocks = <&clocks BCM2835_CLOCK_TSENS>;
+      #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d1ec963a6834e..27e9e16e6455a 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -29,6 +29,8 @@ properties:
         items:
           - enum:
               - qcom,mdm9607-tsens
+              - qcom,msm8226-tsens
+              - qcom,msm8909-tsens
               - qcom,msm8916-tsens
               - qcom,msm8939-tsens
               - qcom,msm8974-tsens
@@ -48,6 +50,7 @@ properties:
               - qcom,msm8953-tsens
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
+              - qcom,qcm2290-tsens
               - qcom,sc7180-tsens
               - qcom,sc7280-tsens
               - qcom,sc8180x-tsens
@@ -56,6 +59,7 @@ properties:
               - qcom,sdm845-tsens
               - qcom,sm6115-tsens
               - qcom,sm6350-tsens
+              - qcom,sm6375-tsens
               - qcom,sm8150-tsens
               - qcom,sm8250-tsens
               - qcom,sm8350-tsens
@@ -67,6 +71,12 @@ properties:
         enum:
           - qcom,ipq8074-tsens
 
+      - description: v2 of TSENS with combined interrupt
+        items:
+          - enum:
+              - qcom,ipq9574-tsens
+          - const: qcom,ipq8074-tsens
+
   reg:
     items:
       - description: TM registers
@@ -223,12 +233,7 @@ allOf:
           contains:
             enum:
               - qcom,ipq8064-tsens
-              - qcom,mdm9607-tsens
-              - qcom,msm8916-tsens
               - qcom,msm8960-tsens
-              - qcom,msm8974-tsens
-              - qcom,msm8976-tsens
-              - qcom,qcs404-tsens
               - qcom,tsens-v0_1
               - qcom,tsens-v1
     then:
@@ -244,22 +249,7 @@ allOf:
       properties:
         compatible:
           contains:
-            enum:
-              - qcom,msm8953-tsens
-              - qcom,msm8996-tsens
-              - qcom,msm8998-tsens
-              - qcom,sc7180-tsens
-              - qcom,sc7280-tsens
-              - qcom,sc8180x-tsens
-              - qcom,sc8280xp-tsens
-              - qcom,sdm630-tsens
-              - qcom,sdm845-tsens
-              - qcom,sm6350-tsens
-              - qcom,sm8150-tsens
-              - qcom,sm8250-tsens
-              - qcom,sm8350-tsens
-              - qcom,sm8450-tsens
-              - qcom,tsens-v2
+            const: qcom,tsens-v2
     then:
       properties:
         interrupts:
diff --git a/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt b/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt
deleted file mode 100644
index 39adf54b4388b..0000000000000
--- a/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Broadcom Kona Family timer
------------------------------------------------------
-This timer is used in the following Broadcom SoCs:
- BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
-
-Required properties:
-- compatible : "brcm,kona-timer"
-- DEPRECATED: compatible : "bcm,kona-timer"
-- reg : Register range for the timer
-- interrupts : interrupt for the timer
-- clocks: phandle + clock specifier pair of the external clock
-- clock-frequency: frequency that the clock operates
-
-Only one of clocks or clock-frequency should be specified.
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
-	timer@35006000 {
-		compatible = "brcm,kona-timer";
-		reg = <0x35006000 0x1000>;
-		interrupts = <0x0 7 0x4>;
-		clocks = <&hub_timer_clk>;
-	};
-
diff --git a/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml b/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml
new file mode 100644
index 0000000000000..d6af8383d6fca
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/brcm,kona-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family timer
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,kona-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+oneOf:
+  - required:
+      - clocks
+  - required:
+      - clock-frequency
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm281xx.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@35006000 {
+        compatible = "brcm,kona-timer";
+        reg = <0x35006000 0x1000>;
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
index bc5e6f2262957..dbba780c9b021 100644
--- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
+++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Cadence TTC - Triple Timer Counter
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
index 716c6afcca1fa..dbe1267af06a6 100644
--- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
+++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
@@ -31,9 +31,13 @@ properties:
           - enum:
               - fsl,imx6sl-gpt
               - fsl,imx6sx-gpt
+              - fsl,imx8mp-gpt
               - fsl,imxrt1050-gpt
               - fsl,imxrt1170-gpt
           - const: fsl,imx6dl-gpt
+      - items:
+          - const: fsl,imx6ul-gpt
+          - const: fsl,imx6sx-gpt
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml b/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml
new file mode 100644
index 0000000000000..ad61ae55850be
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/loongson,ls1x-pwmtimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 PWM timer
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+description:
+  Loongson-1 PWM timer can be used for system clock source
+  and clock event timers.
+
+properties:
+  compatible:
+    const: loongson,ls1b-pwmtimer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/loongson,ls1x-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    clocksource: timer@1fe5c030 {
+        compatible = "loongson,ls1b-pwmtimer";
+        reg = <0x1fe5c030 0x10>;
+
+        clocks = <&clkc LS1X_CLKID_APB>;
+        interrupt-parent = <&intc0>;
+        interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml b/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml
new file mode 100644
index 0000000000000..daa7832babe32
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ralink,rt2880-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Timer present in Ralink family SoCs
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+properties:
+  compatible:
+    const: ralink,rt2880-timer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@100 {
+        compatible = "ralink,rt2880-timer";
+        reg = <0x100 0x20>;
+
+        clocks = <&sysc 3>;
+
+        interrupt-parent = <&intc>;
+        interrupts = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
index 94bef9424df1b..a0185e15a42fe 100644
--- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
+++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -29,14 +29,15 @@ properties:
     oneOf:
       - items:
           - enum:
-              - sifive,fu540-c000-clint
-              - starfive,jh7100-clint
-              - starfive,jh7110-clint
-              - canaan,k210-clint
-          - const: sifive,clint0
+              - canaan,k210-clint       # Canaan Kendryte K210
+              - sifive,fu540-c000-clint # SiFive FU540
+              - starfive,jh7100-clint   # StarFive JH7100
+              - starfive,jh7110-clint   # StarFive JH7110
+          - const: sifive,clint0        # SiFive CLINT v0 IP block
       - items:
           - enum:
               - allwinner,sun20i-d1-clint
+              - thead,th1520-clint
           - const: thead,c900-clint
       - items:
           - const: sifive,clint0
@@ -45,14 +46,9 @@ properties:
         description: For the QEMU virt machine only
 
     description:
-      Should be "<vendor>,<chip>-clint" and "sifive,clint<version>".
-      Supported compatible strings are -
-      "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated
-      onto the SiFive FU540 chip, "canaan,k210-clint" for the SiFive
-      CLINT v0 as integrated onto the Canaan Kendryte K210 chip, and
-      "sifive,clint0" for the SiFive CLINT v0 IP block with no chip
-      integration tweaks.
-      Please refer to sifive-blocks-ip-versioning.txt for details
+      Should be "<vendor>,<chip>-clint", followed by "sifive,clint<version>"
+      when compatible with a SiFive CLINT.  Please refer to
+      sifive-blocks-ip-versioning.txt for details regarding the latter.
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
index fd6a7b51f571b..95f42acd0c54f 100644
--- a/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
+++ b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
@@ -17,7 +17,7 @@ description:
 
 properties:
   $nodename:
-    pattern: "^timestamp(@.*|-[0-9a-f])?$"
+    pattern: "^timestamp(@.*|-([0-9]|[1-9][0-9]+))?$"
 
   "#timestamp-cells":
     description:
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 246863a9bc7e2..ba2bfb547909c 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -139,6 +139,8 @@ properties:
           - infineon,ir38164
             # Infineon IR38263 Voltage Regulator
           - infineon,ir38263
+            # Infineon IRPS5401 Voltage Regulator (PMIC)
+          - infineon,irps5401
             # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
           - infineon,slb9635tt
             # Infineon SLB9645 I2C TPM (new protocol, max 400khz)
diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index c5a06c0483899..bdfa86a0cc98c 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -26,6 +26,7 @@ properties:
           - qcom,msm8994-ufshc
           - qcom,msm8996-ufshc
           - qcom,msm8998-ufshc
+          - qcom,sa8775p-ufshc
           - qcom,sc8280xp-ufshc
           - qcom,sdm845-ufshc
           - qcom,sm6350-ufshc
@@ -70,6 +71,10 @@ properties:
   power-domains:
     maxItems: 1
 
+  qcom,ice:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the Inline Crypto Engine node
+
   reg:
     minItems: 1
     maxItems: 2
@@ -105,6 +110,7 @@ allOf:
           contains:
             enum:
               - qcom,msm8998-ufshc
+              - qcom,sa8775p-ufshc
               - qcom,sc8280xp-ufshc
               - qcom,sm8250-ufshc
               - qcom,sm8350-ufshc
@@ -187,6 +193,25 @@ allOf:
 
     # TODO: define clock bindings for qcom,msm8994-ufshc
 
+  - if:
+      required:
+        - qcom,ice
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        clocks:
+          minItems: 8
+          maxItems: 8
+    else:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+        clocks:
+          minItems: 8
+          maxItems: 11
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
index a9988798898de..88cc1e3a0c887 100644
--- a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
@@ -54,7 +54,7 @@ properties:
     const: ufs-phy
 
   samsung,sysreg:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     description: Should be phandle/offset pair. The phandle to the syscon node
                  which indicates the FSYSx sysreg interface and the offset of
                  the control register for UFS io coherency setting.
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
index b26d26c2b0238..782402800d4ab 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
@@ -45,7 +45,9 @@ properties:
               - fsl,vf610-usb
           - const: fsl,imx27-usb
       - items:
-          - const: fsl,imx8dxl-usb
+          - enum:
+              - fsl,imx8dxl-usb
+              - fsl,imx8ulp-usb
           - const: fsl,imx7ulp-usb
           - const: fsl,imx6ul-usb
       - items:
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index d3506090f8b14..0a5c98ea711d4 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -53,6 +53,7 @@ properties:
               - amlogic,meson8b-usb
               - amlogic,meson-gxbb-usb
               - amlogic,meson-g12a-usb
+              - amlogic,meson-a1-usb
               - intel,socfpga-agilex-hsotg
           - const: snps,dwc2
       - const: amcc,dwc-otg
diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
index 098b73134a1b9..bb373eb025a5f 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx SuperSpeed DWC3 USB SoC controller
 
 maintainers:
-  - Manish Narani <manish.narani@xilinx.com>
+  - Piyush Mehta <piyush.mehta@amd.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml
new file mode 100644
index 0000000000000..ceb76394af606
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,imx8qm-cdns3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP iMX8QM Soc USB Controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qm-usb3
+
+  reg:
+    items:
+      - description: Register set for iMX USB3 Platform Control
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    items:
+      - description: Standby clock. Used during ultra low power states.
+      - description: USB bus clock for usb3 controller.
+      - description: AXI clock for AXI interface.
+      - description: ipg clock for register access.
+      - description: Core clock for usb3 controller.
+
+  clock-names:
+    items:
+      - const: lpm
+      - const: bus
+      - const: aclk
+      - const: ipg
+      - const: core
+
+  power-domains:
+    maxItems: 1
+
+# Required child node:
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: cdns,usb3.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@5b110000 {
+      compatible = "fsl,imx8qm-usb3";
+      reg = <0x5b110000 0x10000>;
+      ranges;
+      clocks = <&usb3_lpcg IMX_LPCG_CLK_1>,
+               <&usb3_lpcg IMX_LPCG_CLK_0>,
+               <&usb3_lpcg IMX_LPCG_CLK_7>,
+               <&usb3_lpcg IMX_LPCG_CLK_4>,
+               <&usb3_lpcg IMX_LPCG_CLK_5>;
+      clock-names = "lpm", "bus", "aclk", "ipg", "core";
+      assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+      assigned-clock-rates = <250000000>;
+      power-domains = <&pd IMX_SC_R_USB_2>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      usb@5b120000 {
+        compatible = "cdns,usb3";
+        reg = <0x5b120000 0x10000>,   /* memory area for OTG/DRD registers */
+              <0x5b130000 0x10000>,   /* memory area for HOST registers */
+              <0x5b140000 0x10000>;   /* memory area for DEVICE registers */
+        reg-names = "otg", "xhci", "dev";
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "host", "peripheral", "otg", "wakeup";
+        phys = <&usb3_phy>;
+        phy-names = "cdns3,usb3-phy";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 9445764bd8de7..b956bb5fada77 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -61,6 +61,7 @@ properties:
               - ibm,476gtr-ehci
               - nxp,lpc1850-ehci
               - qca,ar7100-ehci
+              - rockchip,rk3588-ehci
               - snps,hsdk-v1.0-ehci
               - socionext,uniphier-ehci
           - const: generic-ehci
diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
index d06d1e7d88762..be268e23ca79b 100644
--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -44,6 +44,7 @@ properties:
               - hpe,gxp-ohci
               - ibm,476gtr-ohci
               - ingenic,jz4740-ohci
+              - rockchip,rk3588-ohci
               - snps,hsdk-v1.0-ohci
           - const: generic-ohci
       - enum:
@@ -69,7 +70,7 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 3
+    maxItems: 4
     description: |
       In case the Renesas R-Car Gen3 SoCs:
         - if a host only channel: first clock should be host.
@@ -147,6 +148,20 @@ allOf:
     then:
       properties:
         transceiver: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-ohci
+    then:
+      properties:
+        clocks:
+          minItems: 4
+    else:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 3
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
index 478214ab045e3..a59d91243ac83 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
@@ -304,7 +304,7 @@ examples:
   # Dual role switch with type-c
   - |
     usb@11201000 {
-        compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
+        compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
         reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>;
         reg-names = "mac", "ippc";
         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
new file mode 100644
index 0000000000000..ff3a1707ef570
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/microchip,usb5744.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip USB5744 4-port Hub Controller
+
+description:
+  Microchip's USB5744 SmartHubTM IC is a 4 port, SuperSpeed (SS)/Hi-Speed (HS),
+  low power, low pin count configurable and fully compliant with the USB 3.1
+  Gen 1 specification. The USB5744 also supports Full Speed (FS) and Low Speed
+  (LS) USB signaling, offering complete coverage of all defined USB operating
+  speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0
+  controller, so 5 Gbps SuperSpeed data transfers are not affected by slower
+  USB 2.0 traffic.
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@amd.com>
+  - Michal Simek <michal.simek@amd.com>
+
+properties:
+  compatible:
+    enum:
+      - usb424,2744
+      - usb424,5744
+      - microchip,usb5744
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO controlling the GRST# pin.
+
+  vdd-supply:
+    description:
+      VDD power supply to the hub
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+  i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of an usb hub connected via i2c bus.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,usb5744
+    then:
+      properties:
+        reset-gpios: false
+        vdd-supply: false
+        peer-hub: false
+        i2c-bus: false
+    else:
+      $ref: /schemas/usb/usb-device.yaml
+      required:
+        - peer-hub
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c: i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hub: usb-hub@2d {
+            compatible = "microchip,usb5744";
+            reg = <0x2d>;
+        };
+    };
+
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usb424,2744";
+            reg = <1>;
+            peer-hub = <&hub_3_0>;
+            i2c-bus = <&hub>;
+            reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+            compatible = "usb424,5744";
+            reg = <2>;
+            peer-hub = <&hub_2_0>;
+            i2c-bus = <&hub>;
+            reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
index e2270ce0c56b2..c6e661e8915ca 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@@ -91,6 +91,7 @@ properties:
 
   phys:
     minItems: 1
+    maxItems: 2
     description:
       Must contain an entry for each entry in phy-names.
       See ../phy/phy-bindings.txt for details.
@@ -99,13 +100,7 @@ properties:
     minItems: 1
     items:
       - const: usb2-0
-      - const: usb2-1
-      - const: usb2-2
-      - const: usb2-3
       - const: usb3-0
-      - const: usb3-1
-      - const: usb3-2
-      - const: usb3-3
 
   avddio-usb-supply:
     description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
diff --git a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml
new file mode 100644
index 0000000000000..c0201da002f62
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/onnn,nb7vpq904m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor Type-C DisplayPort ALT Mode Linear Redriver
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - onnn,nb7vpq904m
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: power supply (1.8V)
+
+  enable-gpios: true
+
+  retimer-switch:
+    description: Flag the port as possible handle of SuperSpeed signals retiming
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS) Output endpoint to the Type-C connector
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Super Speed (SS) Input endpoint from the Super-Speed PHY
+        unevaluatedProperties: false
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                $ref: /schemas/types.yaml#/definitions/uint32-array
+                description: |
+                  An array of physical data lane indexes. Position determines how
+                  lanes are connected to the redriver, It is assumed the same order
+                  is kept on the other side of the redriver.
+                  Lane number represents the following
+                  - 0 is RX2 lane
+                  - 1 is TX2 lane
+                  - 2 is TX1 lane
+                  - 3 is RX1 lane
+                  The position determines the physical port of the redriver, in the
+                  order A, B, C & D.
+                oneOf:
+                  - items:
+                      - const: 0
+                      - const: 1
+                      - const: 2
+                      - const: 3
+                    description: |
+                      This is the lanes default layout
+                      - Port A to RX2 lane
+                      - Port B to TX2 lane
+                      - Port C to TX1 lane
+                      - Port D to RX1 lane
+                  - items:
+                      - const: 3
+                      - const: 2
+                      - const: 1
+                      - const: 0
+                    description: |
+                      This is the USBRX2/USBTX2 and USBRX1/USBTX1 swapped lanes layout
+                      - Port A to RX1 lane
+                      - Port B to TX1 lane
+                      - Port C to TX2 lane
+                      - Port D to RX2 lane
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of
+          handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec-mux@32 {
+            compatible = "onnn,nb7vpq904m";
+            reg = <0x32>;
+
+            vcc-supply = <&vreg_l15b_1p8>;
+
+            retimer-switch;
+            orientation-switch;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    usb_con_ss: endpoint {
+                        remote-endpoint = <&typec_con_ss>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    phy_con_ss: endpoint {
+                        remote-endpoint = <&usb_phy_ss>;
+                        data-lanes = <3 2 1 0>;
+                    };
+                };
+                port@2 {
+                    reg = <2>;
+                    usb_con_sbu: endpoint {
+                        remote-endpoint = <&typec_dp_aux>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index d84281926f10b..ae24dac78d9a3 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -17,12 +17,14 @@ properties:
           - qcom,ipq6018-dwc3
           - qcom,ipq8064-dwc3
           - qcom,ipq8074-dwc3
+          - qcom,ipq9574-dwc3
           - qcom,msm8953-dwc3
           - qcom,msm8994-dwc3
           - qcom,msm8996-dwc3
           - qcom,msm8998-dwc3
           - qcom,qcm2290-dwc3
           - qcom,qcs404-dwc3
+          - qcom,sa8775p-dwc3
           - qcom,sc7180-dwc3
           - qcom,sc7280-dwc3
           - qcom,sc8280xp-dwc3
@@ -133,7 +135,6 @@ required:
   - "#address-cells"
   - "#size-cells"
   - ranges
-  - power-domains
   - clocks
   - clock-names
   - interrupts
@@ -177,9 +178,11 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq9574-dwc3
               - qcom,msm8953-dwc3
               - qcom,msm8996-dwc3
               - qcom,msm8998-dwc3
+              - qcom,sa8775p-dwc3
               - qcom,sc7180-dwc3
               - qcom,sc7280-dwc3
               - qcom,sdm670-dwc3
@@ -455,6 +458,25 @@ allOf:
             - const: dm_hs_phy_irq
             - const: ss_phy_irq
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 4
+        interrupt-names:
+          minItems: 3
+          items:
+            - const: pwr_event
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+            - const: ss_phy_irq
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
new file mode 100644
index 0000000000000..55df3129a0bc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMIC based USB Type-C block
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description:
+  Qualcomm PMIC Type-C block
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8150b-typec
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+  reg:
+    description: Type-C port and pdphy SPMI register base offsets
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: Type-C CC attach notification, VBUS error, tCCDebounce done
+      - description: Type-C VCONN powered
+      - description: Type-C CC state change
+      - description: Type-C VCONN over-current
+      - description: Type-C VBUS state change
+      - description: Type-C Attach/detach notification
+      - description: Type-C Legacy cable detect
+      - description: Type-C Try.Src Try.Snk state change
+      - description: Power Domain Signal TX - HardReset or CableReset signal TX
+      - description: Power Domain Signal RX - HardReset or CableReset signal RX
+      - description: Power Domain TX complete
+      - description: Power Domain RX complete
+      - description: Power Domain TX fail
+      - description: Power Domain TX message discard
+      - description: Power Domain RX message discard
+      - description: Power Domain Fast Role Swap event
+
+  interrupt-names:
+    items:
+      - const: or-rid-detect-change
+      - const: vpd-detect
+      - const: cc-state-change
+      - const: vconn-oc
+      - const: vbus-change
+      - const: attach-detach
+      - const: legacy-cable-detect
+      - const: try-snk-src-detect
+      - const: sig-tx
+      - const: sig-rx
+      - const: msg-tx
+      - const: msg-rx
+      - const: msg-tx-failed
+      - const: msg-tx-discarded
+      - const: msg-rx-discarded
+      - const: fr-swap
+
+  vdd-vbus-supply:
+    description: VBUS power supply.
+
+  vdd-pdphy-supply:
+    description: VDD regulator supply to the PDPHY.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Contains a port which produces data-role switching messages.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - vdd-vbus-supply
+  - vdd-pdphy-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/usb/pd.h>
+
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pm8150b_typec: typec@1500 {
+            compatible = "qcom,pm8150b-typec";
+            reg = <0x1500>,
+                  <0x1700>;
+
+            interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+                         <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+                         <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+                         <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x00 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x01 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x02 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x03 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x04 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x05 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x06 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x07 IRQ_TYPE_EDGE_RISING>;
+
+            interrupt-names = "or-rid-detect-change",
+                              "vpd-detect",
+                              "cc-state-change",
+                              "vconn-oc",
+                              "vbus-change",
+                              "attach-detach",
+                              "legacy-cable-detect",
+                              "try-snk-src-detect",
+                              "sig-tx",
+                              "sig-rx",
+                              "msg-tx",
+                              "msg-rx",
+                              "msg-tx-failed",
+                              "msg-tx-discarded",
+                              "msg-rx-discarded",
+                              "fr-swap";
+
+            vdd-vbus-supply = <&pm8150b_vbus>;
+            vdd-pdphy-supply = <&vreg_l2a_3p1>;
+
+            connector {
+                compatible = "usb-c-connector";
+
+                power-role = "source";
+                data-role = "dual";
+                self-powered;
+
+                source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_DUAL_ROLE |
+                               PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        pmic_typec_mux_out: endpoint {
+                            remote-endpoint = <&usb_phy_typec_mux_in>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        pmic_typec_role_switch_out: endpoint {
+                            remote-endpoint = <&usb_role_switch_in>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+
+    usb {
+        dr_mode = "otg";
+        usb-role-switch;
+        port {
+            usb_role_switch_in: endpoint {
+                remote-endpoint = <&pmic_typec_role_switch_out>;
+            };
+        };
+    };
+
+    usb-phy {
+        orientation-switch;
+        port {
+            usb_phy_typec_mux_in: endpoint {
+                remote-endpoint = <&pmic_typec_mux_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 4f7625955cccc..a696f23730d3e 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -44,15 +44,15 @@ properties:
       It's either a single common DWC3 interrupt (dwc_usb3) or individual
       interrupts for the host, gadget and DRD modes.
     minItems: 1
-    maxItems: 3
+    maxItems: 4
 
   interrupt-names:
     minItems: 1
-    maxItems: 3
+    maxItems: 4
     oneOf:
       - const: dwc_usb3
       - items:
-          enum: [host, peripheral, otg]
+          enum: [host, peripheral, otg, wakeup]
 
   clocks:
     description:
diff --git a/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
new file mode 100644
index 0000000000000..24aa9c10d6ab7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/starfive,jh7110-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 wrapper module for the Cadence USBSS-DRD controller
+
+maintainers:
+  - Minda Chen <minda.chen@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-usb
+
+  ranges: true
+
+  starfive,stg-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register Controller stg_syscon node.
+          - description: dr mode register offset of STG_SYSCONSAIF__SYSCFG register for USB.
+    description:
+      The phandle to System Register Controller syscon node and the offset
+      of STG_SYSCONSAIF__SYSCFG register for USB.
+
+  dr_mode:
+    enum: [host, otg, peripheral]
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  clocks:
+    items:
+      - description: link power management clock
+      - description: standby clock
+      - description: APB clock
+      - description: AXI clock
+      - description: UTMI APB clock
+
+  clock-names:
+    items:
+      - const: lpm
+      - const: stb
+      - const: apb
+      - const: axi
+      - const: utmi_apb
+
+  resets:
+    items:
+      - description: Power up reset
+      - description: APB clock reset
+      - description: AXI clock reset
+      - description: UTMI APB clock reset
+
+  reset-names:
+    items:
+      - const: pwrup
+      - const: apb
+      - const: axi
+      - const: utmi_apb
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: cdns,usb3.yaml#
+    description: Required child node
+
+required:
+  - compatible
+  - ranges
+  - starfive,stg-syscon
+  - '#address-cells'
+  - '#size-cells'
+  - dr_mode
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    usb@10100000 {
+        compatible = "starfive,jh7110-usb";
+        ranges = <0x0 0x10100000 0x100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        starfive,stg-syscon = <&stg_syscon 0x4>;
+        clocks = <&syscrg 4>,
+                 <&stgcrg 5>,
+                 <&stgcrg 1>,
+                 <&stgcrg 3>,
+                 <&stgcrg 2>;
+        clock-names = "lpm", "stb", "apb", "axi", "utmi_apb";
+        resets = <&stgcrg 10>,
+                 <&stgcrg 8>,
+                 <&stgcrg 7>,
+                 <&stgcrg 9>;
+        reset-names = "pwrup", "apb", "axi", "utmi_apb";
+        dr_mode = "host";
+
+        usb@0 {
+            compatible = "cdns,usb3";
+            reg = <0x0 0x10000>,
+                  <0x10000 0x10000>,
+                  <0x20000 0x10000>;
+            reg-names = "otg", "xhci", "dev";
+            interrupts = <100>, <108>, <110>;
+            interrupt-names = "host", "peripheral", "otg";
+            maximum-speed = "super-speed";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
index d25fc708e32cf..fec5651f56029 100644
--- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
@@ -92,7 +92,7 @@ examples:
 
         usb@31100000 {
           compatible = "snps,dwc3";
-          reg =<0x00 0x31100000 0x00 0x50000>;
+          reg = <0x00 0x31100000 0x00 0x50000>;
           interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
                        <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
           interrupt-names = "host", "peripheral";
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.yaml b/Documentation/devicetree/bindings/usb/usb251xb.yaml
index 4d15308168178..ac5b99710332a 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.yaml
+++ b/Documentation/devicetree/bindings/usb/usb251xb.yaml
@@ -231,7 +231,7 @@ properties:
       power-on sequence to a port until the port has adequate power.
 
   swap-dx-lanes:
-    $ref: /schemas/types.yaml#/definitions/uint8-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
       Specifies the ports which will swap the differential-pair (D+/D-),
       default is not-swapped.
diff --git a/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml
index 04c123c7252a1..868dffe314bcb 100644
--- a/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml
+++ b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx udc controller
 
 maintainers:
-  - Manish Narani <manish.narani@xilinx.com>
+  - Piyush Mehta <piyush.mehta@amd.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 82d39ab0231b0..af60bf1a66648 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -388,6 +388,8 @@ patternProperties:
     description: EDIMAX Technology Co., Ltd
   "^edt,.*":
     description: Emerging Display Technologies
+  "^ees,.*":
+    description: Emtop Embedded Solutions
   "^eeti,.*":
     description: eGalax_eMPIA Technology Inc
   "^einfochips,.*":
@@ -617,6 +619,8 @@ patternProperties:
     description: Integrated Micro-Electronics Inc.
   "^incircuit,.*":
     description: In-Circuit GmbH
+  "^indiedroid,.*":
+    description: Indiedroid
   "^inet-tek,.*":
     description: Shenzhen iNet Mobile Internet Technology Co., Ltd
   "^infineon,.*":
@@ -781,6 +785,8 @@ patternProperties:
     description: Nanjing Loongmasses Ltd.
   "^lsi,.*":
     description: LSI Corp. (LSI Logic)
+  "^lunzn,.*":
+    description: Shenzhen Lunzn Technology Co., Ltd.
   "^lwn,.*":
     description: Liebherr-Werk Nenzing GmbH
   "^lxa,.*":
@@ -1189,6 +1195,8 @@ patternProperties:
     description: SHIFT GmbH
   "^shimafuji,.*":
     description: Shimafuji Electric, Inc.
+  "^shineworld,.*":
+    description: ShineWorld Innovations
   "^shiratech,.*":
     description: Shiratech Solutions
   "^si-en,.*":
@@ -1267,6 +1275,8 @@ patternProperties:
     description: SpinalHDL
   "^sprd,.*":
     description: Spreadtrum Communications Inc.
+  "^square,.*":
+    description: Square
   "^ssi,.*":
     description: SSI Computer Corp
   "^sst,.*":
@@ -1339,6 +1349,8 @@ patternProperties:
     description: Technologic Systems
   "^techstar,.*":
     description: Shenzhen Techstar Electronics Co., Ltd.
+  "^teejet,.*":
+    description: TeeJet
   "^teltonika,.*":
     description: Teltonika Networks
   "^tempo,.*":
diff --git a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt
deleted file mode 100644
index 2b86a00e351d3..0000000000000
--- a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom Kona Family Watchdog Timer
------------------------------------
-
-This watchdog timer is used in the following Broadcom SoCs:
-  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
-
-Required properties:
-  - compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
-  - reg: memory address & range
-
-Example:
-	watchdog@35002f40 {
-		compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
-		reg = <0x35002f40 0x6c>;
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml
new file mode 100644
index 0000000000000..3d4403b41cbea
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/brcm,kona-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona Family Watchdog Timer
+
+description: |
+  This watchdog timer is used in the following Broadcom SoCs:
+  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: brcm,bcm11351-wdt
+      - const: brcm,kona-wdt
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@35002f40 {
+        compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
+        reg = <0x35002f40 0x6c>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
deleted file mode 100644
index 750a87657448d..0000000000000
--- a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Zynq Watchdog Device Tree Bindings
--------------------------------------------
-
-Required properties:
-- compatible		: Should be "cdns,wdt-r1p2".
-- clocks		: This is pclk (APB clock).
-- interrupts		: This is wd_irq - watchdog timeout interrupt.
-
-Optional properties
-- reset-on-timeout	: If this property exists, then a reset is done
-			  when watchdog times out.
-- timeout-sec		: Watchdog timeout value (in seconds).
-
-Example:
-	watchdog@f8005000 {
-		compatible = "cdns,wdt-r1p2";
-		clocks = <&clkc 45>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 9 1>;
-		reg = <0xf8005000 0x1000>;
-		reset-on-timeout;
-		timeout-sec = <10>;
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/cdns,wdt-r1p2.yaml b/Documentation/devicetree/bindings/watchdog/cdns,wdt-r1p2.yaml
new file mode 100644
index 0000000000000..3c17c5883bcee
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/cdns,wdt-r1p2.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/cdns,wdt-r1p2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence watchdog timer controller
+
+maintainers:
+  - Neeli Srinivas <srinivas.neeli@amd.com>
+
+description:
+  The cadence watchdog timer is used to detect and recover from
+  system malfunctions. This watchdog contains 24 bit counter and
+  a programmable reset period. The timeout period varies from 1 ms
+  to 30 seconds while using a 100Mhz clock.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cdns,wdt-r1p2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-on-timeout:
+    type: boolean
+    description: |
+      If this property exists, then a reset is done when watchdog
+      times out.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    watchdog@f8005000 {
+        compatible = "cdns,wdt-r1p2";
+        reg = <0xf8005000 0x1000>;
+        clocks = <&clkc 45>;
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 9 IRQ_TYPE_EDGE_RISING>;
+        reset-on-timeout;
+        timeout-sec = <10>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml
new file mode 100644
index 0000000000000..81690d4b62a64
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/loongson,ls1x-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 Watchdog Timer
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls1b-wdt
+      - loongson,ls1c-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/loongson,ls1x-clk.h>
+    watchdog: watchdog@1fe5c060 {
+        compatible = "loongson,ls1b-wdt";
+        reg = <0x1fe5c060 0xc>;
+
+        clocks = <&clkc LS1X_CLKID_APB>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml
index 519b48889eb14..f0a584af1223e 100644
--- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml
+++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml
@@ -17,11 +17,11 @@ description: |
 select:
   properties:
     $nodename:
-      pattern: "^watchdog(@.*|-[0-9a-f])?$"
+      pattern: "^watchdog(@.*|-([0-9]|[1-9][0-9]+))?$"
 
 properties:
   $nodename:
-    pattern: "^(timer|watchdog)(@.*|-[0-9a-f])?$"
+    pattern: "^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$"
 
   timeout-sec:
     description:
diff --git a/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml b/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml
new file mode 100644
index 0000000000000..14b0695997402
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/xlnx,versal-wwdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal window watchdog timer controller
+
+maintainers:
+  - Neeli Srinivas <srinivas.neeli@amd.com>
+
+description:
+  Versal watchdog intellectual property uses window watchdog mode.
+  Window watchdog timer(WWDT) contains closed(first) and open(second)
+  window with 32 bit width. Write to the watchdog timer within
+  predefined window periods of time. This means a period that is not
+  too soon and a period that is not too late. The WWDT has to be
+  restarted within the open window time. If software tries to restart
+  WWDT outside of the open window time period, it generates a reset.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,versal-wwdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@fd4d0000 {
+        compatible = "xlnx,versal-wwdt";
+        reg = <0xfd4d0000 0x10000>;
+        clocks = <&clock25>;
+        timeout-sec = <30>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
index 8444c56dd6023..dc1ff39d05a0c 100644
--- a/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx AXI/PLB softcore and window Watchdog Timer
 
 maintainers:
-  - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
-  - Srinivas Neeli <srinivas.neeli@xilinx.com>
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+  - Srinivas Neeli <srinivas.neeli@amd.com>
 
 description:
   The Timebase watchdog timer(WDT) is a free-running 32 bit counter.
diff --git a/Documentation/doc-guide/sphinx.rst b/Documentation/doc-guide/sphinx.rst
index 23edb427e76f4..cd8ad79044910 100644
--- a/Documentation/doc-guide/sphinx.rst
+++ b/Documentation/doc-guide/sphinx.rst
@@ -313,9 +313,18 @@ the documentation build system will automatically turn a reference to
 function name exists.  If you see ``c:func:`` use in a kernel document,
 please feel free to remove it.
 
+Tables
+------
+
+ReStructuredText provides several options for table syntax. Kernel style for
+tables is to prefer *simple table* syntax or *grid table* syntax. See the
+`reStructuredText user reference for table syntax`_ for more details.
+
+.. _reStructuredText user reference for table syntax:
+   https://docutils.sourceforge.io/docs/user/rst/quickref.html#tables
 
 list tables
------------
+~~~~~~~~~~~
 
 The list-table formats can be useful for tables that are not easily laid
 out in the usual Sphinx ASCII-art formats.  These formats are nearly
diff --git a/Documentation/driver-api/basics.rst b/Documentation/driver-api/basics.rst
index 4b4d8e28d3be4..7671b531ba1a8 100644
--- a/Documentation/driver-api/basics.rst
+++ b/Documentation/driver-api/basics.rst
@@ -84,7 +84,13 @@ Reference counting
 Atomics
 -------
 
-.. kernel-doc:: arch/x86/include/asm/atomic.h
+.. kernel-doc:: include/linux/atomic/atomic-instrumented.h
+   :internal:
+
+.. kernel-doc:: include/linux/atomic/atomic-arch-fallback.h
+   :internal:
+
+.. kernel-doc:: include/linux/atomic/atomic-long.h
    :internal:
 
 Kernel objects manipulation
diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst
index 4249eb4239e07..8be086b3f8297 100644
--- a/Documentation/driver-api/driver-model/devres.rst
+++ b/Documentation/driver-api/driver-model/devres.rst
@@ -364,6 +364,7 @@ MEM
   devm_kmalloc_array()
   devm_kmemdup()
   devm_krealloc()
+  devm_krealloc_array()
   devm_kstrdup()
   devm_kstrdup_const()
   devm_kvasprintf()
diff --git a/Documentation/driver-api/edac.rst b/Documentation/driver-api/edac.rst
index b8c742aa0a71c..f4f044b95c4f7 100644
--- a/Documentation/driver-api/edac.rst
+++ b/Documentation/driver-api/edac.rst
@@ -106,6 +106,16 @@ will occupy those chip-select rows.
 This term is avoided because it is unclear when needing to distinguish
 between chip-select rows and socket sets.
 
+* High Bandwidth Memory (HBM)
+
+HBM is a new memory type with low power consumption and ultra-wide
+communication lanes. It uses vertically stacked memory chips (DRAM dies)
+interconnected by microscopic wires called "through-silicon vias," or
+TSVs.
+
+Several stacks of HBM chips connect to the CPU or GPU through an ultra-fast
+interconnect called the "interposer". Therefore, HBM's characteristics
+are nearly indistinguishable from on-chip integrated RAM.
 
 Memory Controllers
 ------------------
@@ -176,3 +186,113 @@ nodes::
 	the L1 and L2 directories would be "edac_device_block's"
 
 .. kernel-doc:: drivers/edac/edac_device.h
+
+
+Heterogeneous system support
+----------------------------
+
+An AMD heterogeneous system is built by connecting the data fabrics of
+both CPUs and GPUs via custom xGMI links. Thus, the data fabric on the
+GPU nodes can be accessed the same way as the data fabric on CPU nodes.
+
+The MI200 accelerators are data center GPUs. They have 2 data fabrics,
+and each GPU data fabric contains four Unified Memory Controllers (UMC).
+Each UMC contains eight channels. Each UMC channel controls one 128-bit
+HBM2e (2GB) channel (equivalent to 8 X 2GB ranks).  This creates a total
+of 4096-bits of DRAM data bus.
+
+While the UMC is interfacing a 16GB (8high X 2GB DRAM) HBM stack, each UMC
+channel is interfacing 2GB of DRAM (represented as rank).
+
+Memory controllers on AMD GPU nodes can be represented in EDAC thusly:
+
+	GPU DF / GPU Node -> EDAC MC
+	GPU UMC           -> EDAC CSROW
+	GPU UMC channel   -> EDAC CHANNEL
+
+For example: a heterogeneous system with 1 AMD CPU is connected to
+4 MI200 (Aldebaran) GPUs using xGMI.
+
+Some more heterogeneous hardware details:
+
+- The CPU UMC (Unified Memory Controller) is mostly the same as the GPU UMC.
+  They have chip selects (csrows) and channels. However, the layouts are different
+  for performance, physical layout, or other reasons.
+- CPU UMCs use 1 channel, In this case UMC = EDAC channel. This follows the
+  marketing speak. CPU has X memory channels, etc.
+- CPU UMCs use up to 4 chip selects, So UMC chip select = EDAC CSROW.
+- GPU UMCs use 1 chip select, So UMC = EDAC CSROW.
+- GPU UMCs use 8 channels, So UMC channel = EDAC channel.
+
+The EDAC subsystem provides a mechanism to handle AMD heterogeneous
+systems by calling system specific ops for both CPUs and GPUs.
+
+AMD GPU nodes are enumerated in sequential order based on the PCI
+hierarchy, and the first GPU node is assumed to have a Node ID value
+following those of the CPU nodes after latter are fully populated::
+
+	$ ls /sys/devices/system/edac/mc/
+		mc0   - CPU MC node 0
+		mc1  |
+		mc2  |- GPU card[0] => node 0(mc1), node 1(mc2)
+		mc3  |
+		mc4  |- GPU card[1] => node 0(mc3), node 1(mc4)
+		mc5  |
+		mc6  |- GPU card[2] => node 0(mc5), node 1(mc6)
+		mc7  |
+		mc8  |- GPU card[3] => node 0(mc7), node 1(mc8)
+
+For example, a heterogeneous system with one AMD CPU is connected to
+four MI200 (Aldebaran) GPUs using xGMI. This topology can be represented
+via the following sysfs entries::
+
+	/sys/devices/system/edac/mc/..
+
+	CPU			# CPU node
+	├── mc 0
+
+	GPU Nodes are enumerated sequentially after CPU nodes have been populated
+	GPU card 1		# Each MI200 GPU has 2 nodes/mcs
+	├── mc 1		# GPU node 0 == mc1, Each MC node has 4 UMCs/CSROWs
+	│   ├── csrow 0		# UMC 0
+	│   │   ├── channel 0	# Each UMC has 8 channels
+	│   │   ├── channel 1   # size of each channel is 2 GB, so each UMC has 16 GB
+	│   │   ├── channel 2
+	│   │   ├── channel 3
+	│   │   ├── channel 4
+	│   │   ├── channel 5
+	│   │   ├── channel 6
+	│   │   ├── channel 7
+	│   ├── csrow 1		# UMC 1
+	│   │   ├── channel 0
+	│   │   ├── ..
+	│   │   ├── channel 7
+	│   ├── ..		..
+	│   ├── csrow 3		# UMC 3
+	│   │   ├── channel 0
+	│   │   ├── ..
+	│   │   ├── channel 7
+	│   ├── rank 0
+	│   ├── ..		..
+	│   ├── rank 31		# total 32 ranks/dimms from 4 UMCs
+	├
+	├── mc 2		# GPU node 1 == mc2
+	│   ├── ..		# each GPU has total 64 GB
+
+	GPU card 2
+	├── mc 3
+	│   ├── ..
+	├── mc 4
+	│   ├── ..
+
+	GPU card 3
+	├── mc 5
+	│   ├── ..
+	├── mc 6
+	│   ├── ..
+
+	GPU card 4
+	├── mc 7
+	│   ├── ..
+	├── mc 8
+	│   ├── ..
diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst
index 78372853c6d4d..b6505914791c7 100644
--- a/Documentation/driver-api/gpio/legacy.rst
+++ b/Documentation/driver-api/gpio/legacy.rst
@@ -165,8 +165,7 @@ Most GPIO controllers can be accessed with memory read/write instructions.
 Those don't need to sleep, and can safely be done from inside hard
 (nonthreaded) IRQ handlers and similar contexts.
 
-Use the following calls to access such GPIOs,
-for which gpio_cansleep() will always return false (see below)::
+Use the following calls to access such GPIOs::
 
 	/* GPIO INPUT:  return zero or nonzero */
 	int gpio_get_value(unsigned gpio);
@@ -200,13 +199,6 @@ Some GPIO controllers must be accessed using message based busses like I2C
 or SPI.  Commands to read or write those GPIO values require waiting to
 get to the head of a queue to transmit a command and get its response.
 This requires sleeping, which can't be done from inside IRQ handlers.
-
-Platforms that support this type of GPIO distinguish them from other GPIOs
-by returning nonzero from this call (which requires a valid GPIO number,
-which should have been previously allocated with gpio_request)::
-
-	int gpio_cansleep(unsigned gpio);
-
 To access such GPIOs, a different set of accessors is defined::
 
 	/* GPIO INPUT:  return zero or nonzero, might sleep */
@@ -215,7 +207,6 @@ To access such GPIOs, a different set of accessors is defined::
 	/* GPIO OUTPUT, might sleep */
 	void gpio_set_value_cansleep(unsigned gpio, int value);
 
-
 Accessing such GPIOs requires a context which may sleep,  for example
 a threaded IRQ handler, and those accessors must be used instead of
 spinlock-safe accessors without the cansleep() name suffix.
@@ -319,11 +310,6 @@ where 'flags' is currently defined to specify the following properties:
 
 	* GPIOF_INIT_LOW	- as output, set initial level to LOW
 	* GPIOF_INIT_HIGH	- as output, set initial level to HIGH
-	* GPIOF_OPEN_DRAIN	- gpio pin is open drain type.
-	* GPIOF_OPEN_SOURCE	- gpio pin is open source type.
-
-	* GPIOF_EXPORT_DIR_FIXED	- export gpio to sysfs, keep direction
-	* GPIOF_EXPORT_DIR_CHANGEABLE	- also export, allow changing direction
 
 since GPIOF_INIT_* are only valid when configured as output, so group valid
 combinations as:
@@ -332,20 +318,6 @@ combinations as:
 	* GPIOF_OUT_INIT_LOW	- configured as output, initial level LOW
 	* GPIOF_OUT_INIT_HIGH	- configured as output, initial level HIGH
 
-When setting the flag as GPIOF_OPEN_DRAIN then it will assume that pins is
-open drain type. Such pins will not be driven to 1 in output mode. It is
-require to connect pull-up on such pins. By enabling this flag, gpio lib will
-make the direction to input when it is asked to set value of 1 in output mode
-to make the pin HIGH. The pin is make to LOW by driving value 0 in output mode.
-
-When setting the flag as GPIOF_OPEN_SOURCE then it will assume that pins is
-open source type. Such pins will not be driven to 0 in output mode. It is
-require to connect pull-down on such pin. By enabling this flag, gpio lib will
-make the direction to input when it is asked to set value of 0 in output mode
-to make the pin LOW. The pin is make to HIGH by driving value 1 in output mode.
-
-In the future, these flags can be extended to support more properties.
-
 Further more, to ease the claim/release of multiple GPIOs, 'struct gpio' is
 introduced to encapsulate all three fields as::
 
@@ -556,7 +528,6 @@ code, which always dispatches through the gpio_chip::
 
   #define gpio_get_value	__gpio_get_value
   #define gpio_set_value	__gpio_set_value
-  #define gpio_cansleep		__gpio_cansleep
 
 Fancier implementations could instead define those as inline functions with
 logic optimizing access to specific SOC-based GPIOs.  For example, if the
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index ff9aa1afdc623..1e16a40da3baa 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -113,6 +113,7 @@ available subsections can be seen below.
    xillybus
    zorro
    hte/index
+   wmi
 
 .. only::  subproject and html
 
diff --git a/Documentation/driver-api/media/camera-sensor.rst b/Documentation/driver-api/media/camera-sensor.rst
index c7d4891bd24e7..93f4f2536c250 100644
--- a/Documentation/driver-api/media/camera-sensor.rst
+++ b/Documentation/driver-api/media/camera-sensor.rst
@@ -151,3 +151,25 @@ used to obtain device's power state after the power state transition:
 The function returns a non-zero value if it succeeded getting the power count or
 runtime PM was disabled, in either of which cases the driver may proceed to
 access the device.
+
+Rotation, orientation and flipping
+----------------------------------
+
+Some systems have the camera sensor mounted upside down compared to its natural
+mounting rotation. In such cases, drivers shall expose the information to
+userspace with the :ref:`V4L2_CID_CAMERA_SENSOR_ROTATION
+<v4l2-camera-sensor-rotation>` control.
+
+Sensor drivers shall also report the sensor's mounting orientation with the
+:ref:`V4L2_CID_CAMERA_SENSOR_ORIENTATION <v4l2-camera-sensor-orientation>`.
+
+Use ``v4l2_fwnode_device_parse()`` to obtain rotation and orientation
+information from system firmware and ``v4l2_ctrl_new_fwnode_properties()`` to
+register the appropriate controls.
+
+Sensor drivers that have any vertical or horizontal flips embedded in the
+register programming sequences shall initialize the V4L2_CID_HFLIP and
+V4L2_CID_VFLIP controls with the values programmed by the register sequences.
+The default values of these controls shall be 0 (disabled). Especially these
+controls shall not be inverted, independently of the sensor's mounting
+rotation.
diff --git a/Documentation/driver-api/ntb.rst b/Documentation/driver-api/ntb.rst
index 11577c2105c55..e991d92b8b1d2 100644
--- a/Documentation/driver-api/ntb.rst
+++ b/Documentation/driver-api/ntb.rst
@@ -207,9 +207,9 @@ The MSI test client serves to test and debug the MSI library which
 allows for passing MSI interrupts across NTB memory windows. The
 test client is interacted with through the debugfs filesystem:
 
-* *debugfs*/ntb\_tool/*hw*/
+* *debugfs*/ntb\_msi\_test/*hw*/
 	A directory in debugfs will be created for each
-	NTB device probed by the tool.  This directory is shortened to *hw*
+	NTB device probed by the msi test.  This directory is shortened to *hw*
 	below.
 * *hw*/port
 	This file describes the local port number
diff --git a/Documentation/driver-api/ptp.rst b/Documentation/driver-api/ptp.rst
index 664838ae77760..5e033c3b11b32 100644
--- a/Documentation/driver-api/ptp.rst
+++ b/Documentation/driver-api/ptp.rst
@@ -73,6 +73,22 @@ Writing clock drivers
    class driver, since the lock may also be needed by the clock
    driver's interrupt service routine.
 
+PTP hardware clock requirements for '.adjphase'
+-----------------------------------------------
+
+   The 'struct ptp_clock_info' interface has a '.adjphase' function.
+   This function has a set of requirements from the PHC in order to be
+   implemented.
+
+     * The PHC implements a servo algorithm internally that is used to
+       correct the offset passed in the '.adjphase' call.
+     * When other PTP adjustment functions are called, the PHC servo
+       algorithm is disabled.
+
+   **NOTE:** '.adjphase' is not a simple time adjustment functionality
+   that 'jumps' the PHC clock time based on the provided offset. It
+   should correct the offset provided using an internal algorithm.
+
 Supported hardware
 ==================
 
@@ -106,3 +122,16 @@ Supported hardware
           - LPF settings (bandwidth, phase limiting, automatic holdover, physical layer assist (per ITU-T G.8273.2))
           - Programmable output PTP clocks, any frequency up to 1GHz (to other PHY/MAC time stampers, refclk to ASSPs/SoCs/FPGAs)
           - Lock to GNSS input, automatic switching between GNSS and user-space PHC control (optional)
+
+   * NVIDIA Mellanox
+
+     - GPIO
+          - Certain variants of ConnectX-6 Dx and later products support one
+            GPIO which can time stamp external triggers and one GPIO to produce
+            periodic signals.
+          - Certain variants of ConnectX-5 and older products support one GPIO,
+            configured to either time stamp external triggers or produce
+            periodic signals.
+     - PHC instances
+          - All ConnectX devices have a free-running counter
+          - ConnectX-6 Dx and later devices have a UTC format counter
diff --git a/Documentation/driver-api/wmi.rst b/Documentation/driver-api/wmi.rst
new file mode 100644
index 0000000000000..6ca58c8249e54
--- /dev/null
+++ b/Documentation/driver-api/wmi.rst
@@ -0,0 +1,21 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+==============
+WMI Driver API
+==============
+
+The WMI driver core supports a more modern bus-based interface for interacting
+with WMI devices, and an older GUID-based interface. The latter interface is
+considered to be deprecated, so new WMI drivers should generally avoid it since
+it has some issues with multiple WMI devices and events sharing the same GUIDs
+and/or notification IDs. The modern bus-based interface instead maps each
+WMI device to a :c:type:`struct wmi_device <wmi_device>`, so it supports
+WMI devices sharing GUIDs and/or notification IDs. Drivers can then register
+a :c:type:`struct wmi_driver <wmi_driver>`, which will be bound to compatible
+WMI devices by the driver core.
+
+.. kernel-doc:: include/linux/wmi.h
+   :internal:
+
+.. kernel-doc:: drivers/platform/x86/wmi.c
+   :export:
diff --git a/Documentation/fault-injection/provoke-crashes.rst b/Documentation/fault-injection/provoke-crashes.rst
index 3abe842256139..1f087e502ca6d 100644
--- a/Documentation/fault-injection/provoke-crashes.rst
+++ b/Documentation/fault-injection/provoke-crashes.rst
@@ -29,7 +29,7 @@ recur_count
 cpoint_name
 	Where in the kernel to trigger the action. It can be
 	one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY,
-	FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_QUEUE_RQ, or DIRECT.
+	FS_SUBMIT_BH, MEM_SWAPOUT, TIMERADD, SCSI_QUEUE_RQ, or DIRECT.
 
 cpoint_type
 	Indicates the action to be taken on hitting the crash point.
diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt
index 2328eada3a491..94d9dece580f1 100644
--- a/Documentation/features/core/jump-labels/arch-support.txt
+++ b/Documentation/features/core/jump-labels/arch-support.txt
@@ -13,7 +13,7 @@
     |        csky: |  ok  |
     |     hexagon: | TODO |
     |        ia64: | TODO |
-    |   loongarch: | TODO |
+    |   loongarch: |  ok  |
     |        m68k: | TODO |
     |  microblaze: | TODO |
     |        mips: |  ok  |
diff --git a/Documentation/features/debug/kmemleak/arch-support.txt b/Documentation/features/debug/kmemleak/arch-support.txt
index 0cfa5f0e4db15..4e205ef703635 100644
--- a/Documentation/features/debug/kmemleak/arch-support.txt
+++ b/Documentation/features/debug/kmemleak/arch-support.txt
@@ -13,7 +13,7 @@
     |        csky: |  ok  |
     |     hexagon: | TODO |
     |        ia64: | TODO |
-    |   loongarch: | TODO |
+    |   loongarch: |  ok  |
     |        m68k: | TODO |
     |  microblaze: |  ok  |
     |        mips: |  ok  |
diff --git a/Documentation/filesystems/autofs-mount-control.rst b/Documentation/filesystems/autofs-mount-control.rst
index bf4b511cdbe85..b5a379d25c40b 100644
--- a/Documentation/filesystems/autofs-mount-control.rst
+++ b/Documentation/filesystems/autofs-mount-control.rst
@@ -196,7 +196,7 @@ information and return operation results::
 		    struct args_ismountpoint	ismountpoint;
 	    };
 
-	    char path[0];
+	    char path[];
     };
 
 The ioctlfd field is a mount point file descriptor of an autofs mount
diff --git a/Documentation/filesystems/autofs.rst b/Documentation/filesystems/autofs.rst
index 4f490278d22fc..3b6e38e646cd8 100644
--- a/Documentation/filesystems/autofs.rst
+++ b/Documentation/filesystems/autofs.rst
@@ -467,7 +467,7 @@ Each ioctl is passed a pointer to an `autofs_dev_ioctl` structure::
 			struct args_ismountpoint	ismountpoint;
 		};
 
-                char path[0];
+                char path[];
         };
 
 For the **OPEN_MOUNT** and **IS_MOUNTPOINT** commands, the target
diff --git a/Documentation/filesystems/directory-locking.rst b/Documentation/filesystems/directory-locking.rst
index 504ba940c36c1..dccd61c7c5c3b 100644
--- a/Documentation/filesystems/directory-locking.rst
+++ b/Documentation/filesystems/directory-locking.rst
@@ -22,12 +22,11 @@ exclusive.
 3) object removal.  Locking rules: caller locks parent, finds victim,
 locks victim and calls the method.  Locks are exclusive.
 
-4) rename() that is _not_ cross-directory.  Locking rules: caller locks
-the parent and finds source and target.  In case of exchange (with
-RENAME_EXCHANGE in flags argument) lock both.  In any case,
-if the target already exists, lock it.  If the source is a non-directory,
-lock it.  If we need to lock both, lock them in inode pointer order.
-Then call the method.  All locks are exclusive.
+4) rename() that is _not_ cross-directory.  Locking rules: caller locks the
+parent and finds source and target.  We lock both (provided they exist).  If we
+need to lock two inodes of different type (dir vs non-dir), we lock directory
+first.  If we need to lock two inodes of the same type, lock them in inode
+pointer order.  Then call the method.  All locks are exclusive.
 NB: we might get away with locking the source (and target in exchange
 case) shared.
 
@@ -44,15 +43,17 @@ All locks are exclusive.
 rules:
 
 	* lock the filesystem
-	* lock parents in "ancestors first" order.
+	* lock parents in "ancestors first" order. If one is not ancestor of
+	  the other, lock them in inode pointer order.
 	* find source and target.
 	* if old parent is equal to or is a descendent of target
 	  fail with -ENOTEMPTY
 	* if new parent is equal to or is a descendent of source
 	  fail with -ELOOP
-	* If it's an exchange, lock both the source and the target.
-	* If the target exists, lock it.  If the source is a non-directory,
-	  lock it.  If we need to lock both, do so in inode pointer order.
+	* Lock both the source and the target provided they exist. If we
+	  need to lock two inodes of different type (dir vs non-dir), we lock
+	  the directory first. If we need to lock two inodes of the same type,
+	  lock them in inode pointer order.
 	* call the method.
 
 All ->i_rwsem are taken exclusive.  Again, we might get away with locking
@@ -66,8 +67,9 @@ If no directory is its own ancestor, the scheme above is deadlock-free.
 
 Proof:
 
-	First of all, at any moment we have a partial ordering of the
-	objects - A < B iff A is an ancestor of B.
+	First of all, at any moment we have a linear ordering of the
+	objects - A < B iff (A is an ancestor of B) or (B is not an ancestor
+        of A and ptr(A) < ptr(B)).
 
 	That ordering can change.  However, the following is true:
 
diff --git a/Documentation/filesystems/dlmfs.rst b/Documentation/filesystems/dlmfs.rst
index 28dd41a63be24..7e2b1fd471d79 100644
--- a/Documentation/filesystems/dlmfs.rst
+++ b/Documentation/filesystems/dlmfs.rst
@@ -12,7 +12,7 @@ dlmfs is built with OCFS2 as it requires most of its infrastructure.
 
 :Project web page:    http://ocfs2.wiki.kernel.org
 :Tools web page:      https://github.com/markfasheh/ocfs2-tools
-:OCFS2 mailing lists: https://oss.oracle.com/projects/ocfs2/mailman/
+:OCFS2 mailing lists: https://subspace.kernel.org/lists.linux.dev.html
 
 All code copyright 2005 Oracle except when otherwise noted.
 
diff --git a/Documentation/filesystems/ext4/journal.rst b/Documentation/filesystems/ext4/journal.rst
index a6bef5293a600..6e8fb2d4b46fe 100644
--- a/Documentation/filesystems/ext4/journal.rst
+++ b/Documentation/filesystems/ext4/journal.rst
@@ -260,8 +260,13 @@ which is 1024 bytes long:
      - s_num_fc_blocks
      - Number of fast commit blocks in the journal.
    * - 0x58
+     - __be32
+     - s_head
+     - Block number of the head (first unused block) of the journal, only
+       up-to-date when the journal is empty.
+   * - 0x5C
      - __u32
-     - s_padding[42]
+     - s_padding[40]
      -
    * - 0xFC
      - __be32
diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst
index c57745375edbc..9359978a5af26 100644
--- a/Documentation/filesystems/f2fs.rst
+++ b/Documentation/filesystems/f2fs.rst
@@ -351,6 +351,22 @@ age_extent_cache	 Enable an age extent cache based on rb-tree. It records
 			 data block update frequency of the extent per inode, in
 			 order to provide better temperature hints for data block
 			 allocation.
+errors=%s		 Specify f2fs behavior on critical errors. This supports modes:
+			 "panic", "continue" and "remount-ro", respectively, trigger
+			 panic immediately, continue without doing anything, and remount
+			 the partition in read-only mode. By default it uses "continue"
+			 mode.
+			 ====================== =============== =============== ========
+			 mode			continue	remount-ro	panic
+			 ====================== =============== =============== ========
+			 access ops		normal		noraml		N/A
+			 syscall errors		-EIO		-EROFS		N/A
+			 mount option		rw		ro		N/A
+			 pending dir write	keep		keep		N/A
+			 pending non-dir write	drop		keep		N/A
+			 pending node write	drop		keep		N/A
+			 pending meta write	keep		keep		N/A
+			 ====================== =============== =============== ========
 ======================== ============================================================
 
 Debugfs Entries
diff --git a/Documentation/filesystems/fsverity.rst b/Documentation/filesystems/fsverity.rst
index ede672dedf110..cb845e8e54353 100644
--- a/Documentation/filesystems/fsverity.rst
+++ b/Documentation/filesystems/fsverity.rst
@@ -38,20 +38,14 @@ fail at runtime.
 Use cases
 =========
 
-By itself, the base fs-verity feature only provides integrity
-protection, i.e. detection of accidental (non-malicious) corruption.
+By itself, fs-verity only provides integrity protection, i.e.
+detection of accidental (non-malicious) corruption.
 
 However, because fs-verity makes retrieving the file hash extremely
 efficient, it's primarily meant to be used as a tool to support
 authentication (detection of malicious modifications) or auditing
 (logging file hashes before use).
 
-Trusted userspace code (e.g. operating system code running on a
-read-only partition that is itself authenticated by dm-verity) can
-authenticate the contents of an fs-verity file by using the
-`FS_IOC_MEASURE_VERITY`_ ioctl to retrieve its hash, then verifying a
-digital signature of it.
-
 A standard file hash could be used instead of fs-verity.  However,
 this is inefficient if the file is large and only a small portion may
 be accessed.  This is often the case for Android application package
@@ -69,24 +63,31 @@ still be used on read-only filesystems.  fs-verity is for files that
 must live on a read-write filesystem because they are independently
 updated and potentially user-installed, so dm-verity cannot be used.
 
-The base fs-verity feature is a hashing mechanism only; actually
-authenticating the files may be done by:
-
-* Userspace-only
-
-* Builtin signature verification + userspace policy
-
-  fs-verity optionally supports a simple signature verification
-  mechanism where users can configure the kernel to require that
-  all fs-verity files be signed by a key loaded into a keyring;
-  see `Built-in signature verification`_.
-
-* Integrity Measurement Architecture (IMA)
-
-  IMA supports including fs-verity file digests and signatures in the
-  IMA measurement list and verifying fs-verity based file signatures
-  stored as security.ima xattrs, based on policy.
-
+fs-verity does not mandate a particular scheme for authenticating its
+file hashes.  (Similarly, dm-verity does not mandate a particular
+scheme for authenticating its block device root hashes.)  Options for
+authenticating fs-verity file hashes include:
+
+- Trusted userspace code.  Often, the userspace code that accesses
+  files can be trusted to authenticate them.  Consider e.g. an
+  application that wants to authenticate data files before using them,
+  or an application loader that is part of the operating system (which
+  is already authenticated in a different way, such as by being loaded
+  from a read-only partition that uses dm-verity) and that wants to
+  authenticate applications before loading them.  In these cases, this
+  trusted userspace code can authenticate a file's contents by
+  retrieving its fs-verity digest using `FS_IOC_MEASURE_VERITY`_, then
+  verifying a signature of it using any userspace cryptographic
+  library that supports digital signatures.
+
+- Integrity Measurement Architecture (IMA).  IMA supports fs-verity
+  file digests as an alternative to its traditional full file digests.
+  "IMA appraisal" enforces that files contain a valid, matching
+  signature in their "security.ima" extended attribute, as controlled
+  by the IMA policy.  For more information, see the IMA documentation.
+
+- Trusted userspace code in combination with `Built-in signature
+  verification`_.  This approach should be used only with great care.
 
 User API
 ========
@@ -111,8 +112,7 @@ follows::
     };
 
 This structure contains the parameters of the Merkle tree to build for
-the file, and optionally contains a signature.  It must be initialized
-as follows:
+the file.  It must be initialized as follows:
 
 - ``version`` must be 1.
 - ``hash_algorithm`` must be the identifier for the hash algorithm to
@@ -129,12 +129,14 @@ as follows:
   file or device.  Currently the maximum salt size is 32 bytes.
 - ``salt_ptr`` is the pointer to the salt, or NULL if no salt is
   provided.
-- ``sig_size`` is the size of the signature in bytes, or 0 if no
-  signature is provided.  Currently the signature is (somewhat
-  arbitrarily) limited to 16128 bytes.  See `Built-in signature
-  verification`_ for more information.
-- ``sig_ptr``  is the pointer to the signature, or NULL if no
-  signature is provided.
+- ``sig_size`` is the size of the builtin signature in bytes, or 0 if no
+  builtin signature is provided.  Currently the builtin signature is
+  (somewhat arbitrarily) limited to 16128 bytes.
+- ``sig_ptr``  is the pointer to the builtin signature, or NULL if no
+  builtin signature is provided.  A builtin signature is only needed
+  if the `Built-in signature verification`_ feature is being used.  It
+  is not needed for IMA appraisal, and it is not needed if the file
+  signature is being handled entirely in userspace.
 - All reserved fields must be zeroed.
 
 FS_IOC_ENABLE_VERITY causes the filesystem to build a Merkle tree for
@@ -158,7 +160,7 @@ fatal signal), no changes are made to the file.
 FS_IOC_ENABLE_VERITY can fail with the following errors:
 
 - ``EACCES``: the process does not have write access to the file
-- ``EBADMSG``: the signature is malformed
+- ``EBADMSG``: the builtin signature is malformed
 - ``EBUSY``: this ioctl is already running on the file
 - ``EEXIST``: the file already has verity enabled
 - ``EFAULT``: the caller provided inaccessible memory
@@ -168,10 +170,10 @@ FS_IOC_ENABLE_VERITY can fail with the following errors:
   reserved bits are set; or the file descriptor refers to neither a
   regular file nor a directory.
 - ``EISDIR``: the file descriptor refers to a directory
-- ``EKEYREJECTED``: the signature doesn't match the file
-- ``EMSGSIZE``: the salt or signature is too long
-- ``ENOKEY``: the fs-verity keyring doesn't contain the certificate
-  needed to verify the signature
+- ``EKEYREJECTED``: the builtin signature doesn't match the file
+- ``EMSGSIZE``: the salt or builtin signature is too long
+- ``ENOKEY``: the ".fs-verity" keyring doesn't contain the certificate
+  needed to verify the builtin signature
 - ``ENOPKG``: fs-verity recognizes the hash algorithm, but it's not
   available in the kernel's crypto API as currently configured (e.g.
   for SHA-512, missing CONFIG_CRYPTO_SHA512).
@@ -180,8 +182,8 @@ FS_IOC_ENABLE_VERITY can fail with the following errors:
   support; or the filesystem superblock has not had the 'verity'
   feature enabled on it; or the filesystem does not support fs-verity
   on this file.  (See `Filesystem support`_.)
-- ``EPERM``: the file is append-only; or, a signature is required and
-  one was not provided.
+- ``EPERM``: the file is append-only; or, a builtin signature is
+  required and one was not provided.
 - ``EROFS``: the filesystem is read-only
 - ``ETXTBSY``: someone has the file open for writing.  This can be the
   caller's file descriptor, another open file descriptor, or the file
@@ -270,9 +272,9 @@ This ioctl takes in a pointer to the following structure::
 - ``FS_VERITY_METADATA_TYPE_DESCRIPTOR`` reads the fs-verity
   descriptor.  See `fs-verity descriptor`_.
 
-- ``FS_VERITY_METADATA_TYPE_SIGNATURE`` reads the signature which was
-  passed to FS_IOC_ENABLE_VERITY, if any.  See `Built-in signature
-  verification`_.
+- ``FS_VERITY_METADATA_TYPE_SIGNATURE`` reads the builtin signature
+  which was passed to FS_IOC_ENABLE_VERITY, if any.  See `Built-in
+  signature verification`_.
 
 The semantics are similar to those of ``pread()``.  ``offset``
 specifies the offset in bytes into the metadata item to read from, and
@@ -299,7 +301,7 @@ FS_IOC_READ_VERITY_METADATA can fail with the following errors:
   overflowed
 - ``ENODATA``: the file is not a verity file, or
   FS_VERITY_METADATA_TYPE_SIGNATURE was requested but the file doesn't
-  have a built-in signature
+  have a builtin signature
 - ``ENOTTY``: this type of filesystem does not implement fs-verity, or
   this ioctl is not yet implemented on it
 - ``EOPNOTSUPP``: the kernel was not configured with fs-verity
@@ -347,8 +349,8 @@ non-verity one, with the following exceptions:
   with EIO (for read()) or SIGBUS (for mmap() reads).
 
 - If the sysctl "fs.verity.require_signatures" is set to 1 and the
-  file is not signed by a key in the fs-verity keyring, then opening
-  the file will fail.  See `Built-in signature verification`_.
+  file is not signed by a key in the ".fs-verity" keyring, then
+  opening the file will fail.  See `Built-in signature verification`_.
 
 Direct access to the Merkle tree is not supported.  Therefore, if a
 verity file is copied, or is backed up and restored, then it will lose
@@ -433,20 +435,25 @@ root hash as well as other fields such as the file size::
 Built-in signature verification
 ===============================
 
-With CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y, fs-verity supports putting
-a portion of an authentication policy (see `Use cases`_) in the
-kernel.  Specifically, it adds support for:
+CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y adds supports for in-kernel
+verification of fs-verity builtin signatures.
+
+**IMPORTANT**!  Please take great care before using this feature.
+It is not the only way to do signatures with fs-verity, and the
+alternatives (such as userspace signature verification, and IMA
+appraisal) can be much better.  It's also easy to fall into a trap
+of thinking this feature solves more problems than it actually does.
+
+Enabling this option adds the following:
 
-1. At fs-verity module initialization time, a keyring ".fs-verity" is
-   created.  The root user can add trusted X.509 certificates to this
-   keyring using the add_key() system call, then (when done)
-   optionally use keyctl_restrict_keyring() to prevent additional
-   certificates from being added.
+1. At boot time, the kernel creates a keyring named ".fs-verity".  The
+   root user can add trusted X.509 certificates to this keyring using
+   the add_key() system call.
 
 2. `FS_IOC_ENABLE_VERITY`_ accepts a pointer to a PKCS#7 formatted
    detached signature in DER format of the file's fs-verity digest.
-   On success, this signature is persisted alongside the Merkle tree.
-   Then, any time the file is opened, the kernel will verify the
+   On success, the ioctl persists the signature alongside the Merkle
+   tree.  Then, any time the file is opened, the kernel verifies the
    file's actual digest against this signature, using the certificates
    in the ".fs-verity" keyring.
 
@@ -454,8 +461,8 @@ kernel.  Specifically, it adds support for:
    When set to 1, the kernel requires that all verity files have a
    correctly signed digest as described in (2).
 
-fs-verity file digests must be signed in the following format, which
-is similar to the structure used by `FS_IOC_MEASURE_VERITY`_::
+The data that the signature as described in (2) must be a signature of
+is the fs-verity file digest in the following format::
 
     struct fsverity_formatted_digest {
             char magic[8];                  /* must be "FSVerity" */
@@ -464,13 +471,66 @@ is similar to the structure used by `FS_IOC_MEASURE_VERITY`_::
             __u8 digest[];
     };
 
-fs-verity's built-in signature verification support is meant as a
-relatively simple mechanism that can be used to provide some level of
-authenticity protection for verity files, as an alternative to doing
-the signature verification in userspace or using IMA-appraisal.
-However, with this mechanism, userspace programs still need to check
-that the verity bit is set, and there is no protection against verity
-files being swapped around.
+That's it.  It should be emphasized again that fs-verity builtin
+signatures are not the only way to do signatures with fs-verity.  See
+`Use cases`_ for an overview of ways in which fs-verity can be used.
+fs-verity builtin signatures have some major limitations that should
+be carefully considered before using them:
+
+- Builtin signature verification does *not* make the kernel enforce
+  that any files actually have fs-verity enabled.  Thus, it is not a
+  complete authentication policy.  Currently, if it is used, the only
+  way to complete the authentication policy is for trusted userspace
+  code to explicitly check whether files have fs-verity enabled with a
+  signature before they are accessed.  (With
+  fs.verity.require_signatures=1, just checking whether fs-verity is
+  enabled suffices.)  But, in this case the trusted userspace code
+  could just store the signature alongside the file and verify it
+  itself using a cryptographic library, instead of using this feature.
+
+- A file's builtin signature can only be set at the same time that
+  fs-verity is being enabled on the file.  Changing or deleting the
+  builtin signature later requires re-creating the file.
+
+- Builtin signature verification uses the same set of public keys for
+  all fs-verity enabled files on the system.  Different keys cannot be
+  trusted for different files; each key is all or nothing.
+
+- The sysctl fs.verity.require_signatures applies system-wide.
+  Setting it to 1 only works when all users of fs-verity on the system
+  agree that it should be set to 1.  This limitation can prevent
+  fs-verity from being used in cases where it would be helpful.
+
+- Builtin signature verification can only use signature algorithms
+  that are supported by the kernel.  For example, the kernel does not
+  yet support Ed25519, even though this is often the signature
+  algorithm that is recommended for new cryptographic designs.
+
+- fs-verity builtin signatures are in PKCS#7 format, and the public
+  keys are in X.509 format.  These formats are commonly used,
+  including by some other kernel features (which is why the fs-verity
+  builtin signatures use them), and are very feature rich.
+  Unfortunately, history has shown that code that parses and handles
+  these formats (which are from the 1990s and are based on ASN.1)
+  often has vulnerabilities as a result of their complexity.  This
+  complexity is not inherent to the cryptography itself.
+
+  fs-verity users who do not need advanced features of X.509 and
+  PKCS#7 should strongly consider using simpler formats, such as plain
+  Ed25519 keys and signatures, and verifying signatures in userspace.
+
+  fs-verity users who choose to use X.509 and PKCS#7 anyway should
+  still consider that verifying those signatures in userspace is more
+  flexible (for other reasons mentioned earlier in this document) and
+  eliminates the need to enable CONFIG_FS_VERITY_BUILTIN_SIGNATURES
+  and its associated increase in kernel attack surface.  In some cases
+  it can even be necessary, since advanced X.509 and PKCS#7 features
+  do not always work as intended with the kernel.  For example, the
+  kernel does not check X.509 certificate validity times.
+
+  Note: IMA appraisal, which supports fs-verity, does not use PKCS#7
+  for its signatures, so it partially avoids the issues discussed
+  here.  IMA appraisal does use X.509.
 
 Filesystem support
 ==================
diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst
index aa1a233b0fa86..0ca479dbb1cd1 100644
--- a/Documentation/filesystems/locking.rst
+++ b/Documentation/filesystems/locking.rst
@@ -521,8 +521,6 @@ prototypes::
 	int (*fsync) (struct file *, loff_t start, loff_t end, int datasync);
 	int (*fasync) (int, struct file *, int);
 	int (*lock) (struct file *, int, struct file_lock *);
-	ssize_t (*sendpage) (struct file *, struct page *, int, size_t,
-			loff_t *, int);
 	unsigned long (*get_unmapped_area)(struct file *, unsigned long,
 			unsigned long, unsigned long, unsigned long);
 	int (*check_flags)(int);
@@ -553,9 +551,8 @@ mutex or just to use i_size_read() instead.
 Note: this does not protect the file->f_pos against concurrent modifications
 since this is something the userspace has to take care about.
 
-->iterate() is called with i_rwsem exclusive.
-
-->iterate_shared() is called with i_rwsem at least shared.
+->iterate_shared() is called with i_rwsem held for reading, and with the
+file f_pos_lock held exclusively
 
 ->fasync() is responsible for maintaining the FASYNC bit in filp->f_flags.
 Most instances call fasync_helper(), which does that maintenance, so it's
diff --git a/Documentation/filesystems/nfs/exporting.rst b/Documentation/filesystems/nfs/exporting.rst
index 0e98edd353b5f..3d97b8d8f7354 100644
--- a/Documentation/filesystems/nfs/exporting.rst
+++ b/Documentation/filesystems/nfs/exporting.rst
@@ -122,8 +122,8 @@ are exportable by setting the s_export_op field in the struct
 super_block.  This field must point to a "struct export_operations"
 struct which has the following members:
 
- encode_fh  (optional)
-    Takes a dentry and creates a filehandle fragment which can later be used
+  encode_fh (optional)
+    Takes a dentry and creates a filehandle fragment which may later be used
     to find or create a dentry for the same object.  The default
     implementation creates a filehandle fragment that encodes a 32bit inode
     and generation number for the inode encoded, and if necessary the
diff --git a/Documentation/filesystems/ocfs2.rst b/Documentation/filesystems/ocfs2.rst
index 42ca9a3d4c6ea..5827062995cb0 100644
--- a/Documentation/filesystems/ocfs2.rst
+++ b/Documentation/filesystems/ocfs2.rst
@@ -14,7 +14,7 @@ get "mount.ocfs2" and "ocfs2_hb_ctl".
 
 Project web page:    http://ocfs2.wiki.kernel.org
 Tools git tree:      https://github.com/markfasheh/ocfs2-tools
-OCFS2 mailing lists: https://oss.oracle.com/projects/ocfs2/mailman/
+OCFS2 mailing lists: https://subspace.kernel.org/lists.linux.dev.html
 
 All code copyright 2005 Oracle except when otherwise noted.
 
diff --git a/Documentation/filesystems/overlayfs.rst b/Documentation/filesystems/overlayfs.rst
index 4c76fda076454..eb7d2c88ddece 100644
--- a/Documentation/filesystems/overlayfs.rst
+++ b/Documentation/filesystems/overlayfs.rst
@@ -231,12 +231,11 @@ Mount options:
     Redirects are enabled.
 - "redirect_dir=follow":
     Redirects are not created, but followed.
-- "redirect_dir=off":
-    Redirects are not created and only followed if "redirect_always_follow"
-    feature is enabled in the kernel/module config.
 - "redirect_dir=nofollow":
-    Redirects are not created and not followed (equivalent to "redirect_dir=off"
-    if "redirect_always_follow" feature is not enabled).
+    Redirects are not created and not followed.
+- "redirect_dir=off":
+    If "redirect_always_follow" is enabled in the kernel/module config,
+    this "off" traslates to "follow", otherwise it translates to "nofollow".
 
 When the NFS export feature is enabled, every copied up directory is
 indexed by the file handle of the lower inode and a file handle of the
@@ -371,6 +370,41 @@ conflict with metacopy=on, and will result in an error.
 [*] redirect_dir=follow only conflicts with metacopy=on if upperdir=... is
 given.
 
+
+Data-only lower layers
+----------------------
+
+With "metacopy" feature enabled, an overlayfs regular file may be a composition
+of information from up to three different layers:
+
+ 1) metadata from a file in the upper layer
+
+ 2) st_ino and st_dev object identifier from a file in a lower layer
+
+ 3) data from a file in another lower layer (further below)
+
+The "lower data" file can be on any lower layer, except from the top most
+lower layer.
+
+Below the top most lower layer, any number of lower most layers may be defined
+as "data-only" lower layers, using double colon ("::") separators.
+A normal lower layer is not allowed to be below a data-only layer, so single
+colon separators are not allowed to the right of double colon ("::") separators.
+
+
+For example:
+
+  mount -t overlay overlay -olowerdir=/l1:/l2:/l3::/do1::/do2 /merged
+
+The paths of files in the "data-only" lower layers are not visible in the
+merged overlayfs directories and the metadata and st_ino/st_dev of files
+in the "data-only" lower layers are not visible in overlayfs inodes.
+
+Only the data of the files in the "data-only" lower layers may be visible
+when a "metacopy" file in one of the lower layers above it, has a "redirect"
+to the absolute path of the "lower data" file in the "data-only" lower layer.
+
+
 Sharing and copying layers
 --------------------------
 
diff --git a/Documentation/filesystems/porting.rst b/Documentation/filesystems/porting.rst
index d2d684ae77984..0f5da78ef4f90 100644
--- a/Documentation/filesystems/porting.rst
+++ b/Documentation/filesystems/porting.rst
@@ -537,7 +537,7 @@ vfs_readdir() is gone; switch to iterate_dir() instead
 
 **mandatory**
 
-->readdir() is gone now; switch to ->iterate()
+->readdir() is gone now; switch to ->iterate_shared()
 
 **mandatory**
 
@@ -693,24 +693,19 @@ parallel now.
 
 ---
 
-**recommended**
+**mandatory**
 
-->iterate_shared() is added; it's a parallel variant of ->iterate().
+->iterate_shared() is added.
 Exclusion on struct file level is still provided (as well as that
 between it and lseek on the same struct file), but if your directory
 has been opened several times, you can get these called in parallel.
 Exclusion between that method and all directory-modifying ones is
 still provided, of course.
 
-Often enough ->iterate() can serve as ->iterate_shared() without any
-changes - it is a read-only operation, after all.  If you have any
-per-inode or per-dentry in-core data structures modified by ->iterate(),
-you might need something to serialize the access to them.  If you
-do dcache pre-seeding, you'll need to switch to d_alloc_parallel() for
-that; look for in-tree examples.
-
-Old method is only used if the new one is absent; eventually it will
-be removed.  Switch while you still can; the old one won't stay.
+If you have any per-inode or per-dentry in-core data structures modified
+by ->iterate_shared(), you might need something to serialize the access
+to them.  If you do dcache pre-seeding, you'll need to switch to
+d_alloc_parallel() for that; look for in-tree examples.
 
 ---
 
@@ -930,9 +925,9 @@ should be done by looking at FMODE_LSEEK in file->f_mode.
 filldir_t (readdir callbacks) calling conventions have changed.  Instead of
 returning 0 or -E... it returns bool now.  false means "no more" (as -E... used
 to) and true - "keep going" (as 0 in old calling conventions).  Rationale:
-callers never looked at specific -E... values anyway.  ->iterate() and
-->iterate_shared() instance require no changes at all, all filldir_t ones in
-the tree converted.
+callers never looked at specific -E... values anyway. -> iterate_shared()
+instances require no changes at all, all filldir_t ones in the tree
+converted.
 
 ---
 
diff --git a/Documentation/filesystems/tmpfs.rst b/Documentation/filesystems/tmpfs.rst
index f18f46be5c0c7..2cd8fa332feb7 100644
--- a/Documentation/filesystems/tmpfs.rst
+++ b/Documentation/filesystems/tmpfs.rst
@@ -84,8 +84,6 @@ nr_inodes  The maximum number of inodes for this instance. The default
            is half of the number of your physical RAM pages, or (on a
            machine with highmem) the number of lowmem RAM pages,
            whichever is the lower.
-noswap     Disables swap. Remounts must respect the original settings.
-           By default swap is enabled.
 =========  ============================================================
 
 These parameters accept a suffix k, m or g for kilo, mega and giga and
@@ -99,36 +97,31 @@ mount with such options, since it allows any user with write access to
 use up all the memory on the machine; but enhances the scalability of
 that instance in a system with many CPUs making intensive use of it.
 
+tmpfs blocks may be swapped out, when there is a shortage of memory.
+tmpfs has a mount option to disable its use of swap:
+
+======  ===========================================================
+noswap  Disables swap. Remounts must respect the original settings.
+        By default swap is enabled.
+======  ===========================================================
+
 tmpfs also supports Transparent Huge Pages which requires a kernel
 configured with CONFIG_TRANSPARENT_HUGEPAGE and with huge supported for
 your system (has_transparent_hugepage(), which is architecture specific).
 The mount options for this are:
 
-======  ============================================================
-huge=0  never: disables huge pages for the mount
-huge=1  always: enables huge pages for the mount
-huge=2  within_size: only allocate huge pages if the page will be
-        fully within i_size, also respect fadvise()/madvise() hints.
-huge=3  advise: only allocate huge pages if requested with
-        fadvise()/madvise()
-======  ============================================================
-
-There is a sysfs file which you can also use to control system wide THP
-configuration for all tmpfs mounts, the file is:
-
-/sys/kernel/mm/transparent_hugepage/shmem_enabled
-
-This sysfs file is placed on top of THP sysfs directory and so is registered
-by THP code. It is however only used to control all tmpfs mounts with one
-single knob. Since it controls all tmpfs mounts it should only be used either
-for emergency or testing purposes. The values you can set for shmem_enabled are:
-
-==  ============================================================
--1  deny: disables huge on shm_mnt and all mounts, for
-    emergency use
--2  force: enables huge on shm_mnt and all mounts, w/o needing
-    option, for testing
-==  ============================================================
+================ ==============================================================
+huge=never       Do not allocate huge pages.  This is the default.
+huge=always      Attempt to allocate huge page every time a new page is needed.
+huge=within_size Only allocate huge page if it will be fully within i_size.
+                 Also respect madvise(2) hints.
+huge=advise      Only allocate huge page if requested with madvise(2).
+================ ==============================================================
+
+See also Documentation/admin-guide/mm/transhuge.rst, which describes the
+sysfs file /sys/kernel/mm/transparent_hugepage/shmem_enabled: which can
+be used to deny huge pages on all tmpfs mounts in an emergency, or to
+force huge pages on all tmpfs mounts for testing.
 
 tmpfs has a mount option to set the NUMA memory allocation policy for
 all files in that instance (if CONFIG_NUMA is enabled) - which can be
diff --git a/Documentation/filesystems/vfs.rst b/Documentation/filesystems/vfs.rst
index 769be52302107..cb2a97e498726 100644
--- a/Documentation/filesystems/vfs.rst
+++ b/Documentation/filesystems/vfs.rst
@@ -1086,7 +1086,6 @@ This describes how the VFS can manipulate an open file.  As of kernel
 		int (*fsync) (struct file *, loff_t, loff_t, int datasync);
 		int (*fasync) (int, struct file *, int);
 		int (*lock) (struct file *, int, struct file_lock *);
-		ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);
 		unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
 		int (*check_flags)(int);
 		int (*flock) (struct file *, int, struct file_lock *);
diff --git a/Documentation/gpu/amdgpu/apu-asic-info-table.csv b/Documentation/gpu/amdgpu/apu-asic-info-table.csv
index 395a7b7bfaefb..2e76b427ba1ee 100644
--- a/Documentation/gpu/amdgpu/apu-asic-info-table.csv
+++ b/Documentation/gpu/amdgpu/apu-asic-info-table.csv
@@ -5,6 +5,8 @@ Ryzen 4000 series, RENOIR, DCN 2.1, 9.3, VCN 2.2, 4.1.2, 11.0.3
 Ryzen 3000 series / AMD Ryzen Embedded V1*/R1* with Radeon Vega Gfx, RAVEN2, DCN 1.0, 9.2.2, VCN 1.0.1, 4.1.1, 10.0.1
 SteamDeck, VANGOGH, DCN 3.0.1, 10.3.1, VCN 3.1.0, 5.2.1, 11.5.0
 Ryzen 5000 series / Ryzen 7x30 series, GREEN SARDINE / Cezanne / Barcelo / Barcelo-R, DCN 2.1, 9.3, VCN 2.2, 4.1.1, 12.0.1
-Ryzen 6000 series / Ryzen 7x35 series, YELLOW CARP / Rembrandt / Rembrandt+, 3.1.2, 10.3.3, VCN 3.1.1, 5.2.3, 13.0.3
+Ryzen 6000 series / Ryzen 7x35 series / Ryzen 7x36 series, YELLOW CARP / Rembrandt / Rembrandt-R, 3.1.2, 10.3.3, VCN 3.1.1, 5.2.3, 13.0.3
 Ryzen 7000 series (AM5), Raphael, 3.1.5, 10.3.6, 3.1.2, 5.2.6, 13.0.5
+Ryzen 7x45 series (FL1), / Dragon Range, 3.1.5, 10.3.6, 3.1.2, 5.2.6, 13.0.5
 Ryzen 7x20 series, Mendocino, 3.1.6, 10.3.7, 3.1.1, 5.2.7, 13.0.8
+Ryzen 7x40 series, Phoenix, 3.1.4, 11.0.1 / 11.0.4, 4.0.2, 6.0.1, 13.0.4 / 13.0.11
\ No newline at end of file
diff --git a/Documentation/gpu/drm-usage-stats.rst b/Documentation/gpu/drm-usage-stats.rst
index b46327356e804..fe35a291ff3e0 100644
--- a/Documentation/gpu/drm-usage-stats.rst
+++ b/Documentation/gpu/drm-usage-stats.rst
@@ -24,7 +24,7 @@ File format specification
 - All keys shall be prefixed with `drm-`.
 - Whitespace between the delimiter and first non-whitespace character shall be
   ignored when parsing.
-- Neither keys or values are allowed to contain whitespace characters.
+- Keys are not allowed to contain whitespace characters.
 - Numerical key value pairs can end with optional unit string.
 - Data type of the value is fixed as defined in the specification.
 
@@ -39,12 +39,13 @@ Data types
 ----------
 
 - <uint> - Unsigned integer without defining the maximum value.
-- <str> - String excluding any above defined reserved characters or whitespace.
+- <keystr> - String excluding any above defined reserved characters or whitespace.
+- <valstr> - String.
 
 Mandatory fully standardised keys
 ---------------------------------
 
-- drm-driver: <str>
+- drm-driver: <valstr>
 
 String shall contain the name this driver registered as via the respective
 `struct drm_driver` data structure.
@@ -52,6 +53,9 @@ String shall contain the name this driver registered as via the respective
 Optional fully standardised keys
 --------------------------------
 
+Identification
+^^^^^^^^^^^^^^
+
 - drm-pdev: <aaaa:bb.cc.d>
 
 For PCI devices this should contain the PCI slot address of the device in
@@ -69,10 +73,13 @@ scope of each device, in which case `drm-pdev` shall be present as well.
 Userspace should make sure to not double account any usage statistics by using
 the above described criteria in order to associate data to individual clients.
 
-- drm-engine-<str>: <uint> ns
+Utilization
+^^^^^^^^^^^
+
+- drm-engine-<keystr>: <uint> ns
 
 GPUs usually contain multiple execution engines. Each shall be given a stable
-and unique name (str), with possible values documented in the driver specific
+and unique name (keystr), with possible values documented in the driver specific
 documentation.
 
 Value shall be in specified time units which the respective GPU engine spent
@@ -84,31 +91,19 @@ larger value within a reasonable period. Upon observing a value lower than what
 was previously read, userspace is expected to stay with that larger previous
 value until a monotonic update is seen.
 
-- drm-engine-capacity-<str>: <uint>
+- drm-engine-capacity-<keystr>: <uint>
 
 Engine identifier string must be the same as the one specified in the
-drm-engine-<str> tag and shall contain a greater than zero number in case the
+drm-engine-<keystr> tag and shall contain a greater than zero number in case the
 exported engine corresponds to a group of identical hardware engines.
 
 In the absence of this tag parser shall assume capacity of one. Zero capacity
 is not allowed.
 
-- drm-memory-<str>: <uint> [KiB|MiB]
-
-Each possible memory type which can be used to store buffer objects by the
-GPU in question shall be given a stable and unique name to be returned as the
-string here.
-
-Value shall reflect the amount of storage currently consumed by the buffer
-object belong to this client, in the respective memory region.
-
-Default unit shall be bytes with optional unit specifiers of 'KiB' or 'MiB'
-indicating kibi- or mebi-bytes.
-
-- drm-cycles-<str> <uint>
+- drm-cycles-<keystr>: <uint>
 
 Engine identifier string must be the same as the one specified in the
-drm-engine-<str> tag and shall contain the number of busy cycles for the given
+drm-engine-<keystr> tag and shall contain the number of busy cycles for the given
 engine.
 
 Values are not required to be constantly monotonic if it makes the driver
@@ -117,16 +112,60 @@ larger value within a reasonable period. Upon observing a value lower than what
 was previously read, userspace is expected to stay with that larger previous
 value until a monotonic update is seen.
 
-- drm-maxfreq-<str> <uint> [Hz|MHz|KHz]
+- drm-maxfreq-<keystr>: <uint> [Hz|MHz|KHz]
 
 Engine identifier string must be the same as the one specified in the
-drm-engine-<str> tag and shall contain the maximum frequency for the given
-engine.  Taken together with drm-cycles-<str>, this can be used to calculate
-percentage utilization of the engine, whereas drm-engine-<str> only reflects
+drm-engine-<keystr> tag and shall contain the maximum frequency for the given
+engine.  Taken together with drm-cycles-<keystr>, this can be used to calculate
+percentage utilization of the engine, whereas drm-engine-<keystr> only reflects
 time active without considering what frequency the engine is operating as a
 percentage of it's maximum frequency.
 
+Memory
+^^^^^^
+
+- drm-memory-<region>: <uint> [KiB|MiB]
+
+Each possible memory type which can be used to store buffer objects by the
+GPU in question shall be given a stable and unique name to be returned as the
+string here.  The name "memory" is reserved to refer to normal system memory.
+
+Value shall reflect the amount of storage currently consumed by the buffer
+objects belong to this client, in the respective memory region.
+
+Default unit shall be bytes with optional unit specifiers of 'KiB' or 'MiB'
+indicating kibi- or mebi-bytes.
+
+- drm-shared-<region>: <uint> [KiB|MiB]
+
+The total size of buffers that are shared with another file (ie. have more
+than a single handle).
+
+- drm-total-<region>: <uint> [KiB|MiB]
+
+The total size of buffers that including shared and private memory.
+
+- drm-resident-<region>: <uint> [KiB|MiB]
+
+The total size of buffers that are resident in the specified region.
+
+- drm-purgeable-<region>: <uint> [KiB|MiB]
+
+The total size of buffers that are purgeable.
+
+- drm-active-<region>: <uint> [KiB|MiB]
+
+The total size of buffers that are active on one or more engines.
+
+Implementation Details
+======================
+
+Drivers should use drm_show_fdinfo() in their `struct file_operations`, and
+implement &drm_driver.show_fdinfo if they wish to provide any stats which
+are not provided by drm_show_fdinfo().  But even driver specific stats should
+be documented above and where possible, aligned with other drivers.
+
 Driver specific implementations
-===============================
+-------------------------------
 
 :ref:`i915-usage-stats`
diff --git a/Documentation/gpu/rfc/index.rst b/Documentation/gpu/rfc/index.rst
index 476719771eef3..e4f7b005138d0 100644
--- a/Documentation/gpu/rfc/index.rst
+++ b/Documentation/gpu/rfc/index.rst
@@ -31,3 +31,7 @@ host such documentation:
 .. toctree::
 
     i915_vm_bind.rst
+
+.. toctree::
+
+   xe.rst
diff --git a/Documentation/gpu/rfc/xe.rst b/Documentation/gpu/rfc/xe.rst
new file mode 100644
index 0000000000000..2516fe141db64
--- /dev/null
+++ b/Documentation/gpu/rfc/xe.rst
@@ -0,0 +1,235 @@
+==========================
+Xe – Merge Acceptance Plan
+==========================
+Xe is a new driver for Intel GPUs that supports both integrated and
+discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
+
+This document aims to establish a merge plan for the Xe, by writing down clear
+pre-merge goals, in order to avoid unnecessary delays.
+
+Xe – Overview
+=============
+The main motivation of Xe is to have a fresh base to work from that is
+unencumbered by older platforms, whilst also taking the opportunity to
+rearchitect our driver to increase sharing across the drm subsystem, both
+leveraging and allowing us to contribute more towards other shared components
+like TTM and drm/scheduler.
+
+This is also an opportunity to start from the beginning with a clean uAPI that is
+extensible by design and already aligned with the modern userspace needs. For
+this reason, the memory model is solely based on GPU Virtual Address space
+bind/unbind (‘VM_BIND’) of GEM buffer objects (BOs) and execution only supporting
+explicit synchronization. With persistent mapping across the execution, the
+userspace does not need to provide a list of all required mappings during each
+submission.
+
+The new driver leverages a lot from i915. As for display, the intent is to share
+the display code with the i915 driver so that there is maximum reuse there.
+
+As for the power management area, the goal is to have a much-simplified support
+for the system suspend states (S-states), PCI device suspend states (D-states),
+GPU/Render suspend states (R-states) and frequency management. It should leverage
+as much as possible all the existent PCI-subsystem infrastructure (pm and
+runtime_pm) and underlying firmware components such PCODE and GuC for the power
+states and frequency decisions.
+
+Repository:
+
+https://gitlab.freedesktop.org/drm/xe/kernel (branch drm-xe-next)
+
+Xe – Platforms
+==============
+Currently, Xe is already functional and has experimental support for multiple
+platforms starting from Tiger Lake, with initial support in userspace implemented
+in Mesa (for Iris and Anv, our OpenGL and Vulkan drivers), as well as in NEO
+(for OpenCL and Level0).
+
+During a transition period, platforms will be supported by both Xe and i915.
+However, the force_probe mechanism existent in both drivers will allow only one
+official and by-default probe at a given time.
+
+For instance, in order to probe a DG2 which PCI ID is 0x5690 by Xe instead of
+i915, the following set of parameters need to be used:
+
+```
+i915.force_probe=!5690 xe.force_probe=5690
+```
+
+In both drivers, the ‘.require_force_probe’ protection forces the user to use the
+force_probe parameter while the driver is under development. This protection is
+only removed when the support for the platform and the uAPI are stable. Stability
+which needs to be demonstrated by CI results.
+
+In order to avoid user space regressions, i915 will continue to support all the
+current platforms that are already out of this protection. Xe support will be
+forever experimental and dependent on the usage of force_probe for these
+platforms.
+
+When the time comes for Xe, the protection will be lifted on Xe and kept in i915.
+
+Xe driver will be protected with both STAGING Kconfig and force_probe. Changes in
+the uAPI are expected while the driver is behind these protections. STAGING will
+be removed when the driver uAPI gets to a mature state where we can guarantee the
+‘no regression’ rule. Then force_probe will be lifted only for future platforms
+that will be productized with Xe driver, but not with i915.
+
+Xe – Pre-Merge Goals
+====================
+
+Drm_scheduler
+-------------
+Xe primarily uses Firmware based scheduling (GuC FW). However, it will use
+drm_scheduler as the scheduler ‘frontend’ for userspace submission in order to
+resolve syncobj and dma-buf implicit sync dependencies. However, drm_scheduler is
+not yet prepared to handle the 1-to-1 relationship between drm_gpu_scheduler and
+drm_sched_entity.
+
+Deeper changes to drm_scheduler should *not* be required to get Xe accepted, but
+some consensus needs to be reached between Xe and other community drivers that
+could also benefit from this work, for coupling FW based/assisted submission such
+as the ARM’s new Mali GPU driver, and others.
+
+As a key measurable result, the patch series introducing Xe itself shall not
+depend on any other patch touching drm_scheduler itself that was not yet merged
+through drm-misc. This, by itself, already includes the reach of an agreement for
+uniform 1 to 1 relationship implementation / usage across drivers.
+
+GPU VA
+------
+Two main goals of Xe are meeting together here:
+
+1) Have an uAPI that aligns with modern UMD needs.
+
+2) Early upstream engagement.
+
+RedHat engineers working on Nouveau proposed a new DRM feature to handle keeping
+track of GPU virtual address mappings. This is still not merged upstream, but
+this aligns very well with our goals and with our VM_BIND. The engagement with
+upstream and the port of Xe towards GPUVA is already ongoing.
+
+As a key measurable result, Xe needs to be aligned with the GPU VA and working in
+our tree. Missing Nouveau patches should *not* block Xe and any needed GPUVA
+related patch should be independent and present on dri-devel or acked by
+maintainers to go along with the first Xe pull request towards drm-next.
+
+DRM_VM_BIND
+-----------
+Nouveau, and Xe are all implementing ‘VM_BIND’ and new ‘Exec’ uAPIs in order to
+fulfill the needs of the modern uAPI. Xe merge should *not* be blocked on the
+development of a common new drm_infrastructure. However, the Xe team needs to
+engage with the community to explore the options of a common API.
+
+As a key measurable result, the DRM_VM_BIND needs to be documented in this file
+below, or this entire block deleted if the consensus is for independent drivers
+vm_bind ioctls.
+
+Although having a common DRM level IOCTL for VM_BIND is not a requirement to get
+Xe merged, it is mandatory to enforce the overall locking scheme for all major
+structs and list (so vm and vma). So, a consensus is needed, and possibly some
+common helpers. If helpers are needed, they should be also documented in this
+document.
+
+ASYNC VM_BIND
+-------------
+Although having a common DRM level IOCTL for VM_BIND is not a requirement to get
+Xe merged, it is mandatory to have a consensus with other drivers and Mesa.
+It needs to be clear how to handle async VM_BIND and interactions with userspace
+memory fences. Ideally with helper support so people don't get it wrong in all
+possible ways.
+
+As a key measurable result, the benefits of ASYNC VM_BIND and a discussion of
+various flavors, error handling and a sample API should be documented here or in
+a separate document pointed to by this document.
+
+Userptr integration and vm_bind
+-------------------------------
+Different drivers implement different ways of dealing with execution of userptr.
+With multiple drivers currently introducing support to VM_BIND, the goal is to
+aim for a DRM consensus on what’s the best way to have that support. To some
+extent this is already getting addressed itself with the GPUVA where likely the
+userptr will be a GPUVA with a NULL GEM call VM bind directly on the userptr.
+However, there are more aspects around the rules for that and the usage of
+mmu_notifiers, locking and other aspects.
+
+This task here has the goal of introducing a documentation of the basic rules.
+
+The documentation *needs* to first live in this document (API session below) and
+then moved to another more specific document or at Xe level or at DRM level.
+
+Documentation should include:
+
+ * The userptr part of the VM_BIND api.
+
+ * Locking, including the page-faulting case.
+
+ * O(1) complexity under VM_BIND.
+
+Some parts of userptr like mmu_notifiers should become GPUVA or DRM helpers when
+the second driver supporting VM_BIND+userptr appears. Details to be defined when
+the time comes.
+
+Long running compute: minimal data structure/scaffolding
+--------------------------------------------------------
+The generic scheduler code needs to include the handling of endless compute
+contexts, with the minimal scaffolding for preempt-ctx fences (probably on the
+drm_sched_entity) and making sure drm_scheduler can cope with the lack of job
+completion fence.
+
+The goal is to achieve a consensus ahead of Xe initial pull-request, ideally with
+this minimal drm/scheduler work, if needed, merged to drm-misc in a way that any
+drm driver, including Xe, could re-use and add their own individual needs on top
+in a next stage. However, this should not block the initial merge.
+
+This is a non-blocker item since the driver without the support for the long
+running compute enabled is not a showstopper.
+
+Display integration with i915
+-----------------------------
+In order to share the display code with the i915 driver so that there is maximum
+reuse, the i915/display/ code is built twice, once for i915.ko and then for
+xe.ko. Currently, the i915/display code in Xe tree is polluted with many 'ifdefs'
+depending on the build target. The goal is to refactor both Xe and i915/display
+code simultaneously in order to get a clean result before they land upstream, so
+that display can already be part of the initial pull request towards drm-next.
+
+However, display code should not gate the acceptance of Xe in upstream. Xe
+patches will be refactored in a way that display code can be removed, if needed,
+from the first pull request of Xe towards drm-next. The expectation is that when
+both drivers are part of the drm-tip, the introduction of cleaner patches will be
+easier and speed up.
+
+Drm_exec
+--------
+Helper to make dma_resv locking for a big number of buffers is getting removed in
+the drm_exec series proposed in https://patchwork.freedesktop.org/patch/524376/
+If that happens, Xe needs to change and incorporate the changes in the driver.
+The goal is to engage with the Community to understand if the best approach is to
+move that to the drivers that are using it or if we should keep the helpers in
+place waiting for Xe to get merged.
+
+This item ties into the GPUVA, VM_BIND, and even long-running compute support.
+
+As a key measurable result, we need to have a community consensus documented in
+this document and the Xe driver prepared for the changes, if necessary.
+
+Dev_coredump
+------------
+
+Xe needs to align with other drivers on the way that the error states are
+dumped, avoiding a Xe only error_state solution. The goal is to use devcoredump
+infrastructure to report error states, since it produces a standardized way
+by exposing a virtual and temporary /sys/class/devcoredump device.
+
+As the key measurable result, Xe driver needs to provide GPU snapshots captured
+at hang time through devcoredump, but without depending on any core modification
+of devcoredump infrastructure itself.
+
+Later, when we are in-tree, the goal is to collaborate with devcoredump
+infrastructure with overall possible improvements, like multiple file support
+for better organization of the dumps, snapshot support, dmesg extra print,
+and whatever may make sense and help the overall infrastructure.
+
+Xe – uAPI high level overview
+=============================
+
+...Warning: To be done in follow up patches after/when/where the main consensus in various items are individually reached.
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 1f8a5ebe188eb..68bdafa0284f5 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -276,11 +276,8 @@ Various hold-ups:
 - Need to switch to drm_fbdev_generic_setup(), otherwise a lot of the custom fb
   setup code can't be deleted.
 
-- Many drivers wrap drm_gem_fb_create() only to check for valid formats. For
-  atomic drivers we could check for valid formats by calling
-  drm_plane_check_pixel_format() against all planes, and pass if any plane
-  supports the format. For non-atomic that's not possible since like the format
-  list for the primary plane is fake and we'd therefor reject valid formats.
+- Need to switch to drm_gem_fb_create(), as now drm_gem_fb_create() checks for
+  valid formats for atomic drivers.
 
 - Many drivers subclass drm_framebuffer, we'd need a embedding compatible
   version of the varios drm_gem_fb_create functions. Maybe called
diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst
index 49db221c0f528..ba04ac7c2167a 100644
--- a/Documentation/gpu/vkms.rst
+++ b/Documentation/gpu/vkms.rst
@@ -118,14 +118,9 @@ Add Plane Features
 
 There's lots of plane features we could add support for:
 
-- ARGB format on primary plane: blend the primary plane into background with
-  translucent alpha.
-
 - Add background color KMS property[Good to get started].
 
-- Full alpha blending on all planes.
-
-- Rotation, scaling.
+- Scaling.
 
 - Additional buffer formats, especially YUV formats for video like NV12.
   Low/high bpp RGB formats would also be interesting.
diff --git a/Documentation/hwmon/aht10.rst b/Documentation/hwmon/aht10.rst
index 4e198c5eb6834..213644b4ecba6 100644
--- a/Documentation/hwmon/aht10.rst
+++ b/Documentation/hwmon/aht10.rst
@@ -5,32 +5,42 @@ Kernel driver aht10
 
 Supported chips:
 
-  * Aosong AHT10
+  * Aosong AHT10/AHT20
 
     Prefix: 'aht10'
 
     Addresses scanned: None
 
-    Datasheet:
+    Datasheet(AHT10):
 
       Chinese: http://www.aosong.com/userfiles/files/media/AHT10%E4%BA%A7%E5%93%81%E6%89%8B%E5%86%8C%20A3%2020201210.pdf
       English: https://server4.eca.ir/eshop/AHT10/Aosong_AHT10_en_draft_0c.pdf
 
+    Datasheet(AHT20):
+
+      English: http://www.aosong.com/userfiles/files/media/Data%20Sheet%20AHT20.pdf
+
 Author: Johannes Cornelis Draaijer <jcdra1@gmail.com>
 
 
 Description
 -----------
 
-The AHT10 is a Temperature and Humidity sensor
+The AHT10/AHT20 is a Temperature and Humidity sensor
 
 The address of this i2c device may only be 0x38
 
+Special Features
+----------------
+
+AHT20 has additional CRC8 support which is sent as the last byte of the sensor
+values.
+
 Usage Notes
 -----------
 
-This driver does not probe for AHT10 devices, as there is no reliable
-way to determine if an i2c chip is or isn't an AHT10. The device has
+This driver does not probe for AHT10/ATH20 devices, as there is no reliable
+way to determine if an i2c chip is or isn't an AHT10/AHT20. The device has
 to be instantiated explicitly with the address 0x38. See
 Documentation/i2c/instantiating-devices.rst for details.
 
diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
index 14b37851af0ca..94dc2d93d1808 100644
--- a/Documentation/hwmon/aquacomputer_d5next.rst
+++ b/Documentation/hwmon/aquacomputer_d5next.rst
@@ -12,6 +12,7 @@ Supported devices:
 * Aquacomputer Octo fan controller
 * Aquacomputer Quadro fan controller
 * Aquacomputer High Flow Next sensor
+* Aquacomputer Leakshield leak prevention system
 * Aquacomputer Aquastream XT watercooling pump
 * Aquacomputer Aquastream Ultimate watercooling pump
 * Aquacomputer Poweradjust 3 fan controller
@@ -57,6 +58,11 @@ The High Flow Next exposes +5V voltages, water quality, conductivity and flow re
 A temperature sensor can be connected to it, in which case it provides its reading
 and an estimation of the dissipated/absorbed power in the liquid cooling loop.
 
+The Leakshield exposes two temperature sensors and coolant pressure (current, min, max and
+target readings). It also exposes the estimated reservoir volume and how much of it is
+filled with coolant. Pump RPM and flow can be set to enhance on-device calculations,
+but this is not yet implemented here.
+
 The Aquastream XT pump exposes temperature readings for the coolant, external sensor
 and fan IC. It also exposes pump and fan speeds (in RPM), voltages, as well as pump
 current.
@@ -83,6 +89,9 @@ Sysfs entries
 temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
 temp[1-8]_offset Temperature sensor correction offset (in millidegrees Celsius)
 fan[1-8]_input   Pump/fan speed (in RPM) / Flow speed (in dL/h)
+fan1_min         Minimal fan speed (in RPM)
+fan1_max         Maximal fan speed (in RPM)
+fan1_target      Target fan speed (in RPM)
 fan5_pulses      Quadro flow sensor pulses
 power[1-8]_input Pump/fan power (in micro Watts)
 in[0-7]_input    Pump/fan voltage (in milli Volts)
diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst
index c92c1d3839e4e..7e3cd5b6686fa 100644
--- a/Documentation/hwmon/asus_ec_sensors.rst
+++ b/Documentation/hwmon/asus_ec_sensors.rst
@@ -14,6 +14,7 @@ Supported boards:
  * ROG CROSSHAIR VIII FORMULA
  * ROG CROSSHAIR VIII HERO
  * ROG CROSSHAIR VIII IMPACT
+ * ROG CROSSHAIR X670E HERO
  * ROG MAXIMUS XI HERO
  * ROG MAXIMUS XI HERO (WI-FI)
  * ROG STRIX B550-E GAMING
diff --git a/Documentation/hwmon/corsair-psu.rst b/Documentation/hwmon/corsair-psu.rst
index c389bd21f4f2f..16db34d464dd6 100644
--- a/Documentation/hwmon/corsair-psu.rst
+++ b/Documentation/hwmon/corsair-psu.rst
@@ -15,11 +15,11 @@ Supported devices:
 
   Corsair HX850i
 
-  Corsair HX1000i (revision 1 and 2)
+  Corsair HX1000i (Series 2022 and 2023)
 
   Corsair HX1200i
 
-  Corsair HX1500i
+  Corsair HX1500i (Series 2022 and 2023)
 
   Corsair RM550i
 
@@ -69,6 +69,8 @@ power1_input		Total power usage
 power2_input		Power usage of the 12v psu rail
 power3_input		Power usage of the 5v psu rail
 power4_input		Power usage of the 3.3v psu rail
+pwm1			PWM value, read only
+pwm1_enable		PWM mode, read only
 temp1_input		Temperature of the psu vrm component
 temp1_crit		Temperature max cirtical value of the psu vrm component
 temp2_input		Temperature of the psu case
@@ -78,11 +80,14 @@ temp2_crit		Temperature max critical value of psu case
 Usage Notes
 -----------
 
-It is an USB HID device, so it is auto-detected and supports hot-swapping.
+It is an USB HID device, so it is auto-detected, supports hot-swapping and
+several devices at once.
 
 Flickering values in the rail voltage levels can be an indicator for a failing
-PSU. The driver also provides some additional useful values via debugfs, which
-do not fit into the hwmon class.
+PSU. Accordingly to the default automatic fan speed plan the fan starts at about
+30% of the wattage rating. If this does not happen, a fan failure is likely. The
+driver also provides some additional useful values via debugfs, which do not fit
+into the hwmon class.
 
 Debugfs entries
 ---------------
diff --git a/Documentation/hwmon/hp-wmi-sensors.rst b/Documentation/hwmon/hp-wmi-sensors.rst
new file mode 100644
index 0000000000000..a6bca9aecdde7
--- /dev/null
+++ b/Documentation/hwmon/hp-wmi-sensors.rst
@@ -0,0 +1,140 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+.. include:: <isonum.txt>
+
+===========================
+Linux HP WMI Sensors Driver
+===========================
+
+:Copyright: |copy| 2023 James Seo <james@equiv.tech>
+
+Description
+===========
+
+Hewlett-Packard (and some HP Compaq) business-class computers report hardware
+monitoring information via Windows Management Instrumentation (WMI).
+This driver exposes that information to the Linux hwmon subsystem, allowing
+userspace utilities like ``sensors`` to gather numeric sensor readings.
+
+sysfs interface
+===============
+
+When the driver is loaded, it discovers the sensors available on the
+system and creates the following sysfs attributes as necessary within
+``/sys/class/hwmon/hwmon[X]``:
+
+(``[X]`` is some number that depends on other system components.)
+
+======================= ======= ===================================
+Name                    Perm    Description
+======================= ======= ===================================
+``curr[X]_input``       RO      Current in milliamperes (mA).
+``curr[X]_label``       RO      Current sensor label.
+``fan[X]_input``        RO      Fan speed in RPM.
+``fan[X]_label``        RO      Fan sensor label.
+``fan[X]_fault``        RO      Fan sensor fault indicator.
+``fan[X]_alarm``        RO      Fan sensor alarm indicator.
+``in[X]_input``         RO      Voltage in millivolts (mV).
+``in[X]_label``         RO      Voltage sensor label.
+``temp[X]_input``       RO      Temperature in millidegrees Celsius
+                                (m\ |deg|\ C).
+``temp[X]_label``       RO      Temperature sensor label.
+``temp[X]_fault``       RO      Temperature sensor fault indicator.
+``temp[X]_alarm``       RO      Temperature sensor alarm indicator.
+``intrusion[X]_alarm``  RW      Chassis intrusion alarm indicator.
+======================= ======= ===================================
+
+``fault`` attributes
+  Reading ``1`` instead of ``0`` as the ``fault`` attribute for a sensor
+  indicates that it has encountered some issue during operation such that
+  measurements from it should not be trusted. If a sensor with the fault
+  condition recovers later, reading this attribute will return ``0`` again.
+
+``alarm`` attributes
+  Reading ``1`` instead of ``0`` as the ``alarm`` attribute for a sensor
+  indicates that one of the following has occurred, depending on its type:
+
+  - ``fan``: The fan has stalled or has been disconnected while running.
+  - ``temp``: The sensor reading has reached a critical threshold.
+    The exact threshold is system-dependent.
+  - ``intrusion``: The system's chassis has been opened.
+
+  After ``1`` is read from an ``alarm`` attribute, the attribute resets itself
+  and returns ``0`` on subsequent reads. As an exception, an
+  ``intrusion[X]_alarm`` can only be manually reset by writing ``0`` to it.
+
+debugfs interface
+=================
+
+.. warning:: The debugfs interface is subject to change without notice
+             and is only available when the kernel is compiled with
+             ``CONFIG_DEBUG_FS`` defined.
+
+The standard hwmon interface in sysfs exposes sensors of several common types
+that are connected as of driver initialization. However, there are usually
+other sensors in WMI that do not meet these criteria. In addition, a number of
+system-dependent "platform events objects" used for ``alarm`` attributes may
+be present. A debugfs interface is therefore provided for read-only access to
+all available HP WMI sensors and platform events objects.
+
+``/sys/kernel/debug/hp-wmi-sensors-[X]/sensor``
+contains one numbered entry per sensor with the following attributes:
+
+=============================== =======================================
+Name                            Example
+=============================== =======================================
+``name``                        ``CPU0 Fan``
+``description``                 ``Reports CPU0 fan speed``
+``sensor_type``                 ``12``
+``other_sensor_type``           (an empty string)
+``operational_status``          ``2``
+``possible_states``             ``Normal,Caution,Critical,Not Present``
+``current_state``               ``Normal``
+``base_units``                  ``19``
+``unit_modifier``               ``0``
+``current_reading``             ``1008``
+``rate_units``                  ``0`` (only exists on some systems)
+=============================== =======================================
+
+If platform events objects are available,
+``/sys/kernel/debug/hp-wmi-sensors-[X]/platform_events``
+contains one numbered entry per object with the following attributes:
+
+=============================== ====================
+Name                            Example
+=============================== ====================
+``name``                        ``CPU0 Fan Stall``
+``description``                 ``CPU0 Fan Speed``
+``source_namespace``            ``root\wmi``
+``source_class``                ``HPBIOS_BIOSEvent``
+``category``                    ``3``
+``possible_severity``           ``25``
+``possible_status``             ``5``
+=============================== ====================
+
+These represent the properties of the underlying ``HPBIOS_BIOSNumericSensor``
+and ``HPBIOS_PlatformEvents`` WMI objects, which vary between systems.
+See [#]_ for more details and Managed Object Format (MOF) definitions.
+
+Known issues and limitations
+============================
+
+- If the existing hp-wmi driver for non-business-class HP systems is already
+  loaded, ``alarm`` attributes will be unavailable even on systems that
+  support them. This is because the same WMI event GUID used by this driver
+  for ``alarm`` attributes is used on those systems for e.g. laptop hotkeys.
+- Dubious sensor hardware and inconsistent BIOS WMI implementations have been
+  observed to cause inaccurate readings and peculiar behavior, such as alarms
+  failing to occur or occurring only once per boot.
+- Only temperature, fan speed, and intrusion sensor types have been seen in
+  the wild so far. Support for voltage and current sensors is therefore
+  provisional.
+- Although HP WMI sensors may claim to be of any type, any oddball sensor
+  types unknown to hwmon will not be supported.
+
+References
+==========
+
+.. [#] Hewlett-Packard Development Company, L.P.,
+       "HP Client Management Interface Technical White Paper", 2005. [Online].
+       Available: https://h20331.www2.hp.com/hpsub/downloads/cmi_whitepaper.pdf
diff --git a/Documentation/hwmon/hwmon-kernel-api.rst b/Documentation/hwmon/hwmon-kernel-api.rst
index c2d1e0299d8d8..6cacf7daf25c0 100644
--- a/Documentation/hwmon/hwmon-kernel-api.rst
+++ b/Documentation/hwmon/hwmon-kernel-api.rst
@@ -66,7 +66,7 @@ hwmon_device_register_with_info.
 
 devm_hwmon_device_unregister does not normally have to be called. It is only
 needed for error handling, and only needed if the driver probe fails after
-the call to hwmon_device_register_with_info and if the automatic (device
+the call to devm_hwmon_device_register_with_info and if the automatic (device
 managed) removal would be too late.
 
 All supported hwmon device registration functions only accept valid device
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index fa1208c62855d..042e1cf9501bf 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -9,7 +9,6 @@ Hardware Monitoring
 
    hwmon-kernel-api
    pmbus-core
-   inspur-ipsps1
    submitting-patches
    sysfs-interface
    userspace-tools
@@ -78,6 +77,7 @@ Hardware Monitoring Kernel Drivers
    gl518sm
    gxp-fan-ctrl
    hih6130
+   hp-wmi-sensors
    ibmaem
    ibm-cffps
    ibmpowernv
@@ -85,6 +85,7 @@ Hardware Monitoring Kernel Drivers
    ina2xx
    ina238
    ina3221
+   inspur-ipsps1
    intel-m10-bmc-hwmon
    ir35221
    ir38064
@@ -140,6 +141,7 @@ Hardware Monitoring Kernel Drivers
    max31760
    max31785
    max31790
+   max31827
    max34440
    max6620
    max6639
diff --git a/Documentation/hwmon/max31827.rst b/Documentation/hwmon/max31827.rst
new file mode 100644
index 0000000000000..b0971d05b8a47
--- /dev/null
+++ b/Documentation/hwmon/max31827.rst
@@ -0,0 +1,90 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver max31827
+======================
+
+Supported chips:
+
+  * Maxim MAX31827
+
+    Prefix: 'max31827'
+
+    Addresses scanned: I2C 0x40 - 0x5f
+
+    Datasheet: Publicly available at the Analog Devices website
+
+  * Maxim MAX31828
+
+    Prefix: 'max31828'
+
+    Addresses scanned: I2C 0x40 - 0x5f
+
+    Datasheet: Publicly available at the Analog Devices website
+
+  * Maxim MAX31829
+
+    Prefix: 'max31829'
+
+    Addresses scanned: I2C 0x40 - 0x5f
+
+    Datasheet: Publicly available at the Analog Devices website
+
+
+Authors:
+	- Daniel Matyas <daniel.matyas@analog.com>
+
+Description
+-----------
+
+The chips supported by this driver are quite similar. The only difference
+between them is found in the default power-on behaviour of the chips. While the
+MAX31827's fault queue is set to 1, the other two chip's fault queue is set to
+4. Besides this, the MAX31829's alarm active state is high, while the other two
+chip's alarms are active on low. It is important to note that the chips can be
+configured to operate in the same manner with 1 write operation to the
+configuration register. From here on, we will refer to all these chips as
+MAX31827.
+
+MAX31827 implements a temperature sensor with a 6 WLP packaging scheme. This
+sensor measures the temperature of the chip itself.
+
+MAX31827 has low and over temperature alarms with an effective value and a
+hysteresis value: -40 and -30 degrees for under temperature alarm and +100 and
++90 degrees for over temperature alarm.
+
+The alarm can be configured in comparator and interrupt mode. Currently only
+comparator mode is implemented. In Comparator mode, the OT/UT status bits have a
+value of 1 when the temperature rises above the TH value or falls below TL,
+which is also subject to the Fault Queue selection. OT status returns to 0 when
+the temperature drops below the TH_HYST value or when shutdown mode is entered.
+Similarly, UT status returns to 0 when the temperature rises above TL_HYST value
+or when shutdown mode is entered.
+
+Putting the MAX31827 into shutdown mode also resets the OT/UT status bits. Note
+that if the mode is changed while OT/UT status bits are set, an OT/UT status
+reset may be required before it begins to behave normally. To prevent this,
+it is recommended to perform a read of the configuration/status register to
+clear the status bits before changing the operating mode.
+
+The conversions can be manual with the one-shot functionality and automatic with
+a set frequency. When powered on, the chip measures temperatures with 1 conv/s.
+Enabling the device when it is already enabled has the side effect of setting
+the conversion frequency to 1 conv/s. The conversion time varies depending on
+the resolution. The conversion time doubles with every bit of increased
+resolution. For 10 bit resolution 35ms are needed, while for 12 bit resolution
+(default) 140ms. When chip is in shutdown mode and a read operation is
+requested, one-shot is triggered, the device waits for 140 (conversion time) + 1
+(error) ms, and only after that is the temperature value register read.
+
+The LSB of the temperature values is 0.0625 degrees Celsius, but the values of
+the temperatures are displayed in milli-degrees. This means, that some data is
+lost. The step between 2 consecutive values is 62 or 63. This effect can be seen
+in the writing of alarm values too. For positive numbers the user-input value
+will always be rounded down to the nearest possible value, for negative numbers
+the user-input will always be rounded up to the nearest possible value.
+
+Notes
+-----
+
+Currently fault queue, alarm polarity and resolution cannot be modified.
+PEC is not implemented either.
diff --git a/Documentation/hwmon/oxp-sensors.rst b/Documentation/hwmon/oxp-sensors.rst
index 566a8d5bde08d..3adeb7406243f 100644
--- a/Documentation/hwmon/oxp-sensors.rst
+++ b/Documentation/hwmon/oxp-sensors.rst
@@ -19,18 +19,32 @@ out the EC registers and values to write to since the EC layout and model is
 different. Aya Neo devices preceding the AIR may not be supportable as the EC
 model is different and do not appear to have manual control capabilities.
 
+Some models have a toggle for changing the behaviour of the "Turbo/Silent"
+button of the device. It will change the key event that it triggers with
+a flip of the `tt_toggle` attribute. See below for boards that support this
+function.
+
 Supported devices
 -----------------
 
 Currently the driver supports the following handhelds:
 
  - AOK ZOE A1
+ - AOK ZOE A1 PRO
+ - Aya Neo 2
  - Aya Neo AIR
  - Aya Neo AIR Pro
+ - Aya Neo Geek
  - OneXPlayer AMD
  - OneXPlayer mini AMD
  - OneXPlayer mini AMD PRO
 
+"Turbo/Silent" button behaviour toggle is only supported on:
+ - AOK ZOE A1
+ - AOK ZOE A1 PRO
+ - OneXPlayer mini AMD (only with updated alpha BIOS)
+ - OneXPlayer mini AMD PRO
+
 Sysfs entries
 -------------
 
@@ -47,3 +61,10 @@ pwm1
   Read Write. Read this attribute to see current duty cycle in the range [0-255].
   When pwm1_enable is set to "1" (manual) write any value in the range [0-255]
   to set fan speed.
+
+tt_toggle
+  Read Write. Read this attribute to check the status of the turbo/silent
+  button behaviour function. Write "1" to activate the switch and "0" to
+  deactivate it. The specific keycodes and behaviour is specific to the device
+  both with this function on and off. This attribute is attached to the platform
+  driver and not to the hwmon driver (/sys/devices/platform/oxp-platform/tt_toggle)
diff --git a/Documentation/hwmon/sht3x.rst b/Documentation/hwmon/sht3x.rst
index 95a850d5b2c1d..87864ffd1777d 100644
--- a/Documentation/hwmon/sht3x.rst
+++ b/Documentation/hwmon/sht3x.rst
@@ -28,15 +28,8 @@ The device communicates with the I2C protocol. Sensors can have the I2C
 addresses 0x44 or 0x45, depending on the wiring. See
 Documentation/i2c/instantiating-devices.rst for methods to instantiate the device.
 
-There are two options configurable by means of sht3x_platform_data:
-
-1. blocking (pull the I2C clock line down while performing the measurement) or
-   non-blocking mode. Blocking mode will guarantee the fastest result but
-   the I2C bus will be busy during that time. By default, non-blocking mode
-   is used. Make sure clock-stretching works properly on your device if you
-   want to use blocking mode.
-2. high or low accuracy. High accuracy is used by default and using it is
-   strongly recommended.
+Even if sht3x sensor supports clock-strech(blocking mode) and non-strench
+(non-blocking mode) in single-shot mode, this driver only supports the latter.
 
 The sht3x sensor supports a single shot mode as well as 5 periodic measure
 modes, which can be controlled with the update_interval sysfs interface.
@@ -85,4 +78,11 @@ heater_enable:      heater enable, heating element removes excess humidity from
 update_interval:    update interval, 0 for single shot, interval in msec
 		    for periodic measurement. If the interval is not supported
 		    by the sensor, the next faster interval is chosen
+repeatability:      write or read repeatability, higher repeatability means
+                    longer measurement duration, lower noise level and
+                    larger energy consumption:
+
+                        - 0: low repeatability
+                        - 1: medium repeatability
+                        - 2: high repeatability
 =================== ============================================================
diff --git a/Documentation/i2c/busses/i2c-i801.rst b/Documentation/i2c/busses/i2c-i801.rst
index ab9e850e8fe0e..e76e68ccf7182 100644
--- a/Documentation/i2c/busses/i2c-i801.rst
+++ b/Documentation/i2c/busses/i2c-i801.rst
@@ -46,7 +46,7 @@ Supported adapters:
   * Intel Emmitsburg (PCH)
   * Intel Alder Lake (PCH)
   * Intel Raptor Lake (PCH)
-  * Intel Meteor Lake (SOC)
+  * Intel Meteor Lake (SOC and PCH)
 
    Datasheets: Publicly available at the Intel website
 
diff --git a/Documentation/i2c/writing-clients.rst b/Documentation/i2c/writing-clients.rst
index b7d3ae7458f86..41ddc10f1ac7b 100644
--- a/Documentation/i2c/writing-clients.rst
+++ b/Documentation/i2c/writing-clients.rst
@@ -46,7 +46,7 @@ driver model device node, and its I2C address.
 	},
 
 	.id_table	= foo_idtable,
-	.probe_new	= foo_probe,
+	.probe		= foo_probe,
 	.remove		= foo_remove,
 	/* if device autodetection is needed: */
 	.class		= I2C_CLASS_SOMETHING,
diff --git a/Documentation/input/devices/xpad.rst b/Documentation/input/devices/xpad.rst
index 173c2acda9fd9..a480bc781565e 100644
--- a/Documentation/input/devices/xpad.rst
+++ b/Documentation/input/devices/xpad.rst
@@ -4,16 +4,16 @@ xpad - Linux USB driver for Xbox compatible controllers
 
 This driver exposes all first-party and third-party Xbox compatible
 controllers. It has a long history and has enjoyed considerable usage
-as Window's xinput library caused most PC games to focus on Xbox
+as Windows' xinput library caused most PC games to focus on Xbox
 controller compatibility.
 
 Due to backwards compatibility all buttons are reported as digital.
-This only effects Original Xbox controllers. All later controller models
+This only affects Original Xbox controllers. All later controller models
 have only digital face buttons.
 
 Rumble is supported on some models of Xbox 360 controllers but not of
 Original Xbox controllers nor on Xbox One controllers. As of writing
-the Xbox One's rumble protocol has not been reverse engineered but in
+the Xbox One's rumble protocol has not been reverse-engineered but in
 the future could be supported.
 
 
@@ -82,7 +82,7 @@ I've tested this with Stepmania, and it works quite well.
 Unknown Controllers
 -------------------
 
-If you have an unknown xbox controller, it should work just fine with
+If you have an unknown Xbox controller, it should work just fine with
 the default settings.
 
 HOWEVER if you have an unknown dance pad not listed below, it will not
@@ -123,7 +123,7 @@ can be found on the net ([1]_, [2]_, [3]_).
 
 Thanks to the trip splitter found on the cable you don't even need to cut the
 original one. You can buy an extension cable and cut that instead. That way,
-you can still use the controller with your X-Box, if you have one ;)
+you can still use the controller with your Xbox, if you have one ;)
 
 
 
diff --git a/Documentation/input/gamepad.rst b/Documentation/input/gamepad.rst
index 71019de460367..eca17a7f5258c 100644
--- a/Documentation/input/gamepad.rst
+++ b/Documentation/input/gamepad.rst
@@ -184,7 +184,7 @@ Gamepads report the following events:
 
   Many pads also have a third button which is branded or has a special symbol
   and meaning. Such buttons are mapped as BTN_MODE. Examples are the Nintendo
-  "HOME" button, the XBox "X"-button or Sony "PS" button.
+  "HOME" button, the Xbox "X" button or the Sony PlayStation "PS" button.
 
 - Rumble:
 
diff --git a/Documentation/kbuild/kbuild.rst b/Documentation/kbuild/kbuild.rst
index 2a22ddb1b8482..bd906407e307c 100644
--- a/Documentation/kbuild/kbuild.rst
+++ b/Documentation/kbuild/kbuild.rst
@@ -150,6 +150,12 @@ the UTS_MACHINE variable, and on some architectures also the kernel config.
 The value of KBUILD_DEBARCH is assumed (not checked) to be a valid Debian
 architecture.
 
+KDOCFLAGS
+---------
+Specify extra (warning/error) flags for kernel-doc checks during the build,
+see scripts/kernel-doc for which flags are supported. Note that this doesn't
+(currently) apply to documentation builds.
+
 ARCH
 ----
 Set ARCH to the architecture to be built.
diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst
index ce57254cb871f..3ade16c18328a 100644
--- a/Documentation/leds/index.rst
+++ b/Documentation/leds/index.rst
@@ -17,6 +17,7 @@ LEDs
    uleds
 
    leds-blinkm
+   leds-cht-wcove
    leds-el15203000
    leds-lm3556
    leds-lp3944
diff --git a/Documentation/leds/leds-cht-wcove.rst b/Documentation/leds/leds-cht-wcove.rst
new file mode 100644
index 0000000000000..5ec7cb60c4aaa
--- /dev/null
+++ b/Documentation/leds/leds-cht-wcove.rst
@@ -0,0 +1,38 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================================================
+Kernel driver for Intel Cherry Trail Whiskey Cove PMIC LEDs
+===========================================================
+
+/sys/class/leds/<led>/hw_pattern
+--------------------------------
+
+Specify a hardware pattern for the Whiskey Cove PMIC LEDs.
+
+The only supported pattern is hardware breathing mode::
+
+    "0 2000 1 2000"
+
+	^
+	|
+    Max-|     ---
+	|    /   \
+	|   /     \
+	|  /       \     /
+	| /         \   /
+    Min-|-           ---
+	|
+	0------2------4--> time (sec)
+
+The rise and fall times must be the same value.
+Supported values are 2000, 1000, 500 and 250 for
+breathing frequencies of 1/4, 1/2, 1 and 2 Hz.
+
+The set pattern only controls the timing. For max brightness the last
+set brightness is used and the max brightness can be changed
+while breathing by writing the brightness attribute.
+
+This is just like how blinking works in the LED subsystem,
+for both sw and hw blinking the brightness can also be changed
+while blinking. Breathing on this hw really is just a variant
+mode of blinking.
diff --git a/Documentation/leds/leds-class.rst b/Documentation/leds/leds-class.rst
index cd155ead8703d..5db620ed27aa2 100644
--- a/Documentation/leds/leds-class.rst
+++ b/Documentation/leds/leds-class.rst
@@ -169,6 +169,87 @@ Setting the brightness to zero with brightness_set() callback function
 should completely turn off the LED and cancel the previously programmed
 hardware blinking function, if any.
 
+Hardware driven LEDs
+====================
+
+Some LEDs can be programmed to be driven by hardware. This is not
+limited to blink but also to turn off or on autonomously.
+To support this feature, a LED needs to implement various additional
+ops and needs to declare specific support for the supported triggers.
+
+With hw control we refer to the LED driven by hardware.
+
+LED driver must define the following value to support hw control:
+
+    - hw_control_trigger:
+               unique trigger name supported by the LED in hw control
+               mode.
+
+LED driver must implement the following API to support hw control:
+    - hw_control_is_supported:
+                check if the flags passed by the supported trigger can
+                be parsed and activate hw control on the LED.
+
+                Return 0 if the passed flags mask is supported and
+                can be set with hw_control_set().
+
+                If the passed flags mask is not supported -EOPNOTSUPP
+                must be returned, the LED trigger will use software
+                fallback in this case.
+
+                Return a negative error in case of any other error like
+                device not ready or timeouts.
+
+     - hw_control_set:
+                activate hw control. LED driver will use the provided
+                flags passed from the supported trigger, parse them to
+                a set of mode and setup the LED to be driven by hardware
+                following the requested modes.
+
+                Set LED_OFF via the brightness_set to deactivate hw control.
+
+                Return 0 on success, a negative error number on failing to
+                apply flags.
+
+    - hw_control_get:
+                get active modes from a LED already in hw control, parse
+                them and set in flags the current active flags for the
+                supported trigger.
+
+                Return 0 on success, a negative error number on failing
+                parsing the initial mode.
+                Error from this function is NOT FATAL as the device may
+                be in a not supported initial state by the attached LED
+                trigger.
+
+    - hw_control_get_device:
+                return the device associated with the LED driver in
+                hw control. A trigger might use this to match the
+                returned device from this function with a configured
+                device for the trigger as the source for blinking
+                events and correctly enable hw control.
+                (example a netdev trigger configured to blink for a
+                particular dev match the returned dev from get_device
+                to set hw control)
+
+                Returns a pointer to a struct device or NULL if nothing
+                is currently attached.
+
+LED driver can activate additional modes by default to workaround the
+impossibility of supporting each different mode on the supported trigger.
+Examples are hardcoding the blink speed to a set interval, enable special
+feature like bypassing blink if some requirements are not met.
+
+A trigger should first check if the hw control API are supported by the LED
+driver and check if the trigger is supported to verify if hw control is possible,
+use hw_control_is_supported to check if the flags are supported and only at
+the end use hw_control_set to activate hw control.
+
+A trigger can use hw_control_get to check if a LED is already in hw control
+and init their flags.
+
+When the LED is in hw control, no software blink is possible and doing so
+will effectively disable hw control.
 
 Known Issues
 ============
diff --git a/Documentation/leds/well-known-leds.txt b/Documentation/leds/well-known-leds.txt
index e9c30dc75884d..67b44704801f2 100644
--- a/Documentation/leds/well-known-leds.txt
+++ b/Documentation/leds/well-known-leds.txt
@@ -58,6 +58,7 @@ LEDs on notebook body, indicating that sound input / output is muted.
 
 * System notification
 
+Good: "rgb:status"
 Legacy: "status-led:{red,green,blue}" (Motorola Droid 4)
 Legacy: "lp5523:{r,g,b}" (Nokia N900)
 
@@ -65,7 +66,7 @@ Phones usually have multi-color status LED.
 
 * Power management
 
-Good: "platform:*:charging" (allwinner sun50i)
+Good: "platform:*:charging" (allwinner sun50i, leds-cht-wcove)
 
 * Screen
 
diff --git a/Documentation/maintainer/configure-git.rst b/Documentation/maintainer/configure-git.rst
index 80ae5030a5902..ec0ddfb9cdd3c 100644
--- a/Documentation/maintainer/configure-git.rst
+++ b/Documentation/maintainer/configure-git.rst
@@ -56,7 +56,7 @@ by adding the following hook into your git:
 	$ cat >.git/hooks/applypatch-msg <<'EOF'
 	#!/bin/sh
 	. git-sh-setup
-	perl -pi -e 's|^Message-Id:\s*<?([^>]+)>?$|Link: https://lore.kernel.org/r/$1|g;' "$1"
+	perl -pi -e 's|^Message-I[dD]:\s*<?([^>]+)>?$|Link: https://lore.kernel.org/r/$1|g;' "$1"
 	test -x "$GIT_DIR/hooks/commit-msg" &&
 		exec "$GIT_DIR/hooks/commit-msg" ${1+"$@"}
 	:
diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index 756be15a49a41..ecc40fbbcfb8e 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -28,5 +28,6 @@ fit into other categories.
    oxsemi-tornado
    pci-endpoint-test
    spear-pcie-gadget
+   tps6594-pfsm
    uacce
    xilinx_sdfec
diff --git a/Documentation/misc-devices/tps6594-pfsm.rst b/Documentation/misc-devices/tps6594-pfsm.rst
new file mode 100644
index 0000000000000..4ada37ccdcbae
--- /dev/null
+++ b/Documentation/misc-devices/tps6594-pfsm.rst
@@ -0,0 +1,87 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Texas Instruments TPS6594 PFSM driver
+=====================================
+
+Author: Julien Panis (jpanis@baylibre.com)
+
+Overview
+========
+
+Strictly speaking, PFSM (Pre-configurable Finite State Machine) is not
+hardware. It is a piece of code.
+
+The TPS6594 PMIC (Power Management IC) integrates a state machine which
+manages operational modes. Depending on the current operational mode,
+some voltage domains remain energized while others can be off.
+
+The PFSM driver can be used to trigger transitions between configured
+states. It also provides R/W access to the device registers.
+
+Supported chips
+---------------
+
+- tps6594-q1
+- tps6593-q1
+- lp8764-q1
+
+Driver location
+===============
+
+drivers/misc/tps6594-pfsm.c
+
+Driver type definitions
+=======================
+
+include/uapi/linux/tps6594_pfsm.h
+
+Driver IOCTLs
+=============
+
+:c:macro::`PMIC_GOTO_STANDBY`
+All device resources are powered down. The processor is off, and
+no voltage domains are energized.
+
+:c:macro::`PMIC_GOTO_LP_STANDBY`
+The digital and analog functions of the PMIC, which are not
+required to be always-on, are turned off (low-power).
+
+:c:macro::`PMIC_UPDATE_PGM`
+Triggers a firmware update.
+
+:c:macro::`PMIC_SET_ACTIVE_STATE`
+One of the operational modes.
+The PMICs are fully functional and supply power to all PDN loads.
+All voltage domains are energized in both MCU and Main processor
+sections.
+
+:c:macro::`PMIC_SET_MCU_ONLY_STATE`
+One of the operational modes.
+Only the power resources assigned to the MCU Safety Island are on.
+
+:c:macro::`PMIC_SET_RETENTION_STATE`
+One of the operational modes.
+Depending on the triggers set, some DDR/GPIO voltage domains can
+remain energized, while all other domains are off to minimize
+total system power.
+
+Driver usage
+============
+
+See available PFSMs::
+
+    # ls /dev/pfsm*
+
+Dump the registers of pages 0 and 1::
+
+    # hexdump -C /dev/pfsm-0-0x48
+
+See PFSM events::
+
+    # cat /proc/interrupts
+
+Userspace code example
+----------------------
+
+samples/pfsm/pfsm-wakeup.c
diff --git a/Documentation/mm/damon/design.rst b/Documentation/mm/damon/design.rst
index 0cff6fac6b7e8..4bfdf1d30c4ae 100644
--- a/Documentation/mm/damon/design.rst
+++ b/Documentation/mm/damon/design.rst
@@ -4,31 +4,55 @@
 Design
 ======
 
-Configurable Layers
-===================
-
-DAMON provides data access monitoring functionality while making the accuracy
-and the overhead controllable.  The fundamental access monitorings require
-primitives that dependent on and optimized for the target address space.  On
-the other hand, the accuracy and overhead tradeoff mechanism, which is the core
-of DAMON, is in the pure logic space.  DAMON separates the two parts in
-different layers and defines its interface to allow various low level
-primitives implementations configurable with the core logic.  We call the low
-level primitives implementations monitoring operations.
-
-Due to this separated design and the configurable interface, users can extend
-DAMON for any address space by configuring the core logics with appropriate
-monitoring operations.  If appropriate one is not provided, users can implement
-the operations on their own.
+
+Overall Architecture
+====================
+
+DAMON subsystem is configured with three layers including
+
+- Operations Set: Implements fundamental operations for DAMON that depends on
+  the given monitoring target address-space and available set of
+  software/hardware primitives,
+- Core: Implements core logics including monitoring overhead/accurach control
+  and access-aware system operations on top of the operations set layer, and
+- Modules: Implements kernel modules for various purposes that provides
+  interfaces for the user space, on top of the core layer.
+
+
+Configurable Operations Set
+---------------------------
+
+For data access monitoring and additional low level work, DAMON needs a set of
+implementations for specific operations that are dependent on and optimized for
+the given target address space.  On the other hand, the accuracy and overhead
+tradeoff mechanism, which is the core logic of DAMON, is in the pure logic
+space.  DAMON separates the two parts in different layers, namely DAMON
+Operations Set and DAMON Core Logics Layers, respectively.  It further defines
+the interface between the layers to allow various operations sets to be
+configured with the core logic.
+
+Due to this design, users can extend DAMON for any address space by configuring
+the core logic to use the appropriate operations set.  If any appropriate set
+is unavailable, users can implement one on their own.
 
 For example, physical memory, virtual memory, swap space, those for specific
 processes, NUMA nodes, files, and backing memory devices would be supportable.
-Also, if some architectures or devices support special optimized access check
-primitives, those will be easily configurable.
+Also, if some architectures or devices supporting special optimized access
+check primitives, those will be easily configurable.
 
 
-Reference Implementations of Address Space Specific Monitoring Operations
-=========================================================================
+Programmable Modules
+--------------------
+
+Core layer of DAMON is implemented as a framework, and exposes its application
+programming interface to all kernel space components such as subsystems and
+modules.  For common use cases of DAMON, DAMON subsystem provides kernel
+modules that built on top of the core layer using the API, which can be easily
+used by the user space end users.
+
+
+Operations Set Layer
+====================
 
 The monitoring operations are defined in two parts:
 
@@ -90,8 +114,12 @@ conflict with the reclaim logic using ``PG_idle`` and ``PG_young`` page flags,
 as Idle page tracking does.
 
 
-Address Space Independent Core Mechanisms
-=========================================
+Core Logics
+===========
+
+
+Monitoring
+----------
 
 Below four sections describe each of the DAMON core mechanisms and the five
 monitoring attributes, ``sampling interval``, ``aggregation interval``,
@@ -100,7 +128,7 @@ regions``.
 
 
 Access Frequency Monitoring
----------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 The output of DAMON says what pages are how frequently accessed for a given
 duration.  The resolution of the access frequency is controlled by setting
@@ -127,7 +155,7 @@ size of the target workload grows.
 
 
 Region Based Sampling
----------------------
+~~~~~~~~~~~~~~~~~~~~~
 
 To avoid the unbounded increase of the overhead, DAMON groups adjacent pages
 that assumed to have the same access frequencies into a region.  As long as the
@@ -144,7 +172,7 @@ assumption is not guaranteed.
 
 
 Adaptive Regions Adjustment
----------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Even somehow the initial monitoring target regions are well constructed to
 fulfill the assumption (pages in same region have similar access frequencies),
@@ -162,8 +190,22 @@ In this way, DAMON provides its best-effort quality and minimal overhead while
 keeping the bounds users set for their trade-off.
 
 
+Age Tracking
+~~~~~~~~~~~~
+
+By analyzing the monitoring results, users can also find how long the current
+access pattern of a region has maintained.  That could be used for good
+understanding of the access pattern.  For example, page placement algorithm
+utilizing both the frequency and the recency could be implemented using that.
+To make such access pattern maintained period analysis easier, DAMON maintains
+yet another counter called ``age`` in each region.  For each ``aggregation
+interval``, DAMON checks if the region's size and access frequency
+(``nr_accesses``) has significantly changed.  If so, the counter is reset to
+zero.  Otherwise, the counter is increased.
+
+
 Dynamic Target Space Updates Handling
--------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 The monitoring target address range could dynamically changed.  For example,
 virtual memory could be dynamically mapped and unmapped.  Physical memory could
@@ -174,3 +216,246 @@ monitoring operations to check dynamic changes including memory mapping changes
 and applies it to monitoring operations-related data structures such as the
 abstracted monitoring target memory area only for each of a user-specified time
 interval (``update interval``).
+
+
+.. _damon_design_damos:
+
+Operation Schemes
+-----------------
+
+One common purpose of data access monitoring is access-aware system efficiency
+optimizations.  For example,
+
+    paging out memory regions that are not accessed for more than two minutes
+
+or
+
+    using THP for memory regions that are larger than 2 MiB and showing a high
+    access frequency for more than one minute.
+
+One straightforward approach for such schemes would be profile-guided
+optimizations.  That is, getting data access monitoring results of the
+workloads or the system using DAMON, finding memory regions of special
+characteristics by profiling the monitoring results, and making system
+operation changes for the regions.  The changes could be made by modifying or
+providing advice to the software (the application and/or the kernel), or
+reconfiguring the hardware.  Both offline and online approaches could be
+available.
+
+Among those, providing advice to the kernel at runtime would be flexible and
+effective, and therefore widely be used.   However, implementing such schemes
+could impose unnecessary redundancy and inefficiency.  The profiling could be
+redundant if the type of interest is common.  Exchanging the information
+including monitoring results and operation advice between kernel and user
+spaces could be inefficient.
+
+To allow users to reduce such redundancy and inefficiencies by offloading the
+works, DAMON provides a feature called Data Access Monitoring-based Operation
+Schemes (DAMOS).  It lets users specify their desired schemes at a high
+level.  For such specifications, DAMON starts monitoring, finds regions having
+the access pattern of interest, and applies the user-desired operation actions
+to the regions as soon as found.
+
+
+.. _damon_design_damos_action:
+
+Operation Action
+~~~~~~~~~~~~~~~~
+
+The management action that the users desire to apply to the regions of their
+interest.  For example, paging out, prioritizing for next reclamation victim
+selection, advising ``khugepaged`` to collapse or split, or doing nothing but
+collecting statistics of the regions.
+
+The list of supported actions is defined in DAMOS, but the implementation of
+each action is in the DAMON operations set layer because the implementation
+normally depends on the monitoring target address space.  For example, the code
+for paging specific virtual address ranges out would be different from that for
+physical address ranges.  And the monitoring operations implementation sets are
+not mandated to support all actions of the list.  Hence, the availability of
+specific DAMOS action depends on what operations set is selected to be used
+together.
+
+Applying an action to a region is considered as changing the region's
+characteristics.  Hence, DAMOS resets the age of regions when an action is
+applied to those.
+
+
+.. _damon_design_damos_access_pattern:
+
+Target Access Pattern
+~~~~~~~~~~~~~~~~~~~~~
+
+The access pattern of the schemes' interest.  The patterns are constructed with
+the properties that DAMON's monitoring results provide, specifically the size,
+the access frequency, and the age.  Users can describe their access pattern of
+interest by setting minimum and maximum values of the three properties.  If a
+region's three properties are in the ranges, DAMOS classifies it as one of the
+regions that the scheme is having an interest in.
+
+
+.. _damon_design_damos_quotas:
+
+Quotas
+~~~~~~
+
+DAMOS upper-bound overhead control feature.  DAMOS could incur high overhead if
+the target access pattern is not properly tuned.  For example, if a huge memory
+region having the access pattern of interest is found, applying the scheme's
+action to all pages of the huge region could consume unacceptably large system
+resources.  Preventing such issues by tuning the access pattern could be
+challenging, especially if the access patterns of the workloads are highly
+dynamic.
+
+To mitigate that situation, DAMOS provides an upper-bound overhead control
+feature called quotas.  It lets users specify an upper limit of time that DAMOS
+can use for applying the action, and/or a maximum bytes of memory regions that
+the action can be applied within a user-specified time duration.
+
+
+.. _damon_design_damos_quotas_prioritization:
+
+Prioritization
+^^^^^^^^^^^^^^
+
+A mechanism for making a good decision under the quotas.  When the action
+cannot be applied to all regions of interest due to the quotas, DAMOS
+prioritizes regions and applies the action to only regions having high enough
+priorities so that it will not exceed the quotas.
+
+The prioritization mechanism should be different for each action.  For example,
+rarely accessed (colder) memory regions would be prioritized for page-out
+scheme action.  In contrast, the colder regions would be deprioritized for huge
+page collapse scheme action.  Hence, the prioritization mechanisms for each
+action are implemented in each DAMON operations set, together with the actions.
+
+Though the implementation is up to the DAMON operations set, it would be common
+to calculate the priority using the access pattern properties of the regions.
+Some users would want the mechanisms to be personalized for their specific
+case.  For example, some users would want the mechanism to weigh the recency
+(``age``) more than the access frequency (``nr_accesses``).  DAMOS allows users
+to specify the weight of each access pattern property and passes the
+information to the underlying mechanism.  Nevertheless, how and even whether
+the weight will be respected are up to the underlying prioritization mechanism
+implementation.
+
+
+.. _damon_design_damos_watermarks:
+
+Watermarks
+~~~~~~~~~~
+
+Conditional DAMOS (de)activation automation.  Users might want DAMOS to run
+only under certain situations.  For example, when a sufficient amount of free
+memory is guaranteed, running a scheme for proactive reclamation would only
+consume unnecessary system resources.  To avoid such consumption, the user would
+need to manually monitor some metrics such as free memory ratio, and turn
+DAMON/DAMOS on or off.
+
+DAMOS allows users to offload such works using three watermarks.  It allows the
+users to configure the metric of their interest, and three watermark values,
+namely high, middle, and low.  If the value of the metric becomes above the
+high watermark or below the low watermark, the scheme is deactivated.  If the
+metric becomes below the mid watermark but above the low watermark, the scheme
+is activated.  If all schemes are deactivated by the watermarks, the monitoring
+is also deactivated.  In this case, the DAMON worker thread only periodically
+checks the watermarks and therefore incurs nearly zero overhead.
+
+
+.. _damon_design_damos_filters:
+
+Filters
+~~~~~~~
+
+Non-access pattern-based target memory regions filtering.  If users run
+self-written programs or have good profiling tools, they could know something
+more than the kernel, such as future access patterns or some special
+requirements for specific types of memory. For example, some users may know
+only anonymous pages can impact their program's performance.  They can also
+have a list of latency-critical processes.
+
+To let users optimize DAMOS schemes with such special knowledge, DAMOS provides
+a feature called DAMOS filters.  The feature allows users to set an arbitrary
+number of filters for each scheme.  Each filter specifies the type of target
+memory, and whether it should exclude the memory of the type (filter-out), or
+all except the memory of the type (filter-in).
+
+As of this writing, anonymous page type and memory cgroup type are supported by
+the feature.  Some filter target types can require additional arguments.  For
+example, the memory cgroup filter type asks users to specify the file path of
+the memory cgroup for the filter.  Hence, users can apply specific schemes to
+only anonymous pages, non-anonymous pages, pages of specific cgroups, all pages
+excluding those of specific cgroups, and any combination of those.
+
+
+Application Programming Interface
+---------------------------------
+
+The programming interface for kernel space data access-aware applications.
+DAMON is a framework, so it does nothing by itself.  Instead, it only helps
+other kernel components such as subsystems and modules building their data
+access-aware applications using DAMON's core features.  For this, DAMON exposes
+its all features to other kernel components via its application programming
+interface, namely ``include/linux/damon.h``.  Please refer to the API
+:doc:`document </mm/damon/api>` for details of the interface.
+
+
+Modules
+=======
+
+Because the core of DAMON is a framework for kernel components, it doesn't
+provide any direct interface for the user space.  Such interfaces should be
+implemented by each DAMON API user kernel components, instead.  DAMON subsystem
+itself implements such DAMON API user modules, which are supposed to be used
+for general purpose DAMON control and special purpose data access-aware system
+operations, and provides stable application binary interfaces (ABI) for the
+user space.  The user space can build their efficient data access-aware
+applications using the interfaces.
+
+
+General Purpose User Interface Modules
+--------------------------------------
+
+DAMON modules that provide user space ABIs for general purpose DAMON usage in
+runtime.
+
+DAMON user interface modules, namely 'DAMON sysfs interface' and 'DAMON debugfs
+interface' are DAMON API user kernel modules that provide ABIs to the
+user-space.  Please note that DAMON debugfs interface is currently deprecated.
+
+Like many other ABIs, the modules create files on sysfs and debugfs, allow
+users to specify their requests to and get the answers from DAMON by writing to
+and reading from the files.  As a response to such I/O, DAMON user interface
+modules control DAMON and retrieve the results as user requested via the DAMON
+API, and return the results to the user-space.
+
+The ABIs are designed to be used for user space applications development,
+rather than human beings' fingers.  Human users are recommended to use such
+user space tools.  One such Python-written user space tool is available at
+Github (https://github.com/awslabs/damo), Pypi
+(https://pypistats.org/packages/damo), and Fedora
+(https://packages.fedoraproject.org/pkgs/python-damo/damo/).
+
+Please refer to the ABI :doc:`document </admin-guide/mm/damon/usage>` for
+details of the interfaces.
+
+
+Special-Purpose Access-aware Kernel Modules
+-------------------------------------------
+
+DAMON modules that provide user space ABI for specific purpose DAMON usage.
+
+DAMON sysfs/debugfs user interfaces are for full control of all DAMON features
+in runtime.  For each special-purpose system-wide data access-aware system
+operations such as proactive reclamation or LRU lists balancing, the interfaces
+could be simplified by removing unnecessary knobs for the specific purpose, and
+extended for boot-time and even compile time control.  Default values of DAMON
+control parameters for the usage would also need to be optimized for the
+purpose.
+
+To support such cases, yet more DAMON API user kernel modules that provide more
+simple and optimized user space interfaces are available.  Currently, two
+modules for proactive reclamation and LRU lists manipulation are provided.  For
+more detail, please read the usage documents for those
+(:doc:`/admin-guide/mm/damon/reclaim` and
+:doc:`/admin-guide/mm/damon/lru_sort`).
diff --git a/Documentation/mm/damon/faq.rst b/Documentation/mm/damon/faq.rst
index dde7e2414ee60..3279dc7a8211f 100644
--- a/Documentation/mm/damon/faq.rst
+++ b/Documentation/mm/damon/faq.rst
@@ -4,29 +4,6 @@
 Frequently Asked Questions
 ==========================
 
-Why a new subsystem, instead of extending perf or other user space tools?
-=========================================================================
-
-First, because it needs to be lightweight as much as possible so that it can be
-used online, any unnecessary overhead such as kernel - user space context
-switching cost should be avoided.  Second, DAMON aims to be used by other
-programs including the kernel.  Therefore, having a dependency on specific
-tools like perf is not desirable.  These are the two biggest reasons why DAMON
-is implemented in the kernel space.
-
-
-Can 'idle pages tracking' or 'perf mem' substitute DAMON?
-=========================================================
-
-Idle page tracking is a low level primitive for access check of the physical
-address space.  'perf mem' is similar, though it can use sampling to minimize
-the overhead.  On the other hand, DAMON is a higher-level framework for the
-monitoring of various address spaces.  It is focused on memory management
-optimization and provides sophisticated accuracy/overhead handling mechanisms.
-Therefore, 'idle pages tracking' and 'perf mem' could provide a subset of
-DAMON's output, but cannot substitute DAMON.
-
-
 Does DAMON support virtual memory only?
 =======================================
 
diff --git a/Documentation/mm/damon/maintainer-profile.rst b/Documentation/mm/damon/maintainer-profile.rst
index 24a202f03de82..a84c14e590530 100644
--- a/Documentation/mm/damon/maintainer-profile.rst
+++ b/Documentation/mm/damon/maintainer-profile.rst
@@ -3,7 +3,7 @@
 DAMON Maintainer Entry Profile
 ==============================
 
-The DAMON subsystem covers the files that listed in 'DATA ACCESS MONITOR'
+The DAMON subsystem covers the files that are listed in 'DATA ACCESS MONITOR'
 section of 'MAINTAINERS' file.
 
 The mailing lists for the subsystem are damon@lists.linux.dev and
@@ -15,7 +15,7 @@ SCM Trees
 
 There are multiple Linux trees for DAMON development.  Patches under
 development or testing are queued in damon/next [2]_ by the DAMON maintainer.
-Suffieicntly reviewed patches will be queued in mm-unstable [1]_ by the memory
+Sufficiently reviewed patches will be queued in mm-unstable [1]_ by the memory
 management subsystem maintainer.  After more sufficient tests, the patches will
 be queued in mm-stable [3]_ , and finally pull-requested to the mainline by the
 memory management subsystem maintainer.
diff --git a/Documentation/mm/page_migration.rst b/Documentation/mm/page_migration.rst
index 313dce18893e9..e35af7805be54 100644
--- a/Documentation/mm/page_migration.rst
+++ b/Documentation/mm/page_migration.rst
@@ -73,14 +73,13 @@ In kernel use of migrate_pages()
    It also prevents the swapper or other scans from encountering
    the page.
 
-2. We need to have a function of type new_page_t that can be
+2. We need to have a function of type new_folio_t that can be
    passed to migrate_pages(). This function should figure out
-   how to allocate the correct new page given the old page.
+   how to allocate the correct new folio given the old folio.
 
 3. The migrate_pages() function is called which attempts
    to do the migration. It will call the function to allocate
-   the new page for each page that is considered for
-   moving.
+   the new folio for each folio that is considered for moving.
 
 How migrate_pages() works
 =========================
diff --git a/Documentation/mm/page_tables.rst b/Documentation/mm/page_tables.rst
index 96939571d7bc1..7840c1891751e 100644
--- a/Documentation/mm/page_tables.rst
+++ b/Documentation/mm/page_tables.rst
@@ -3,3 +3,152 @@
 ===========
 Page Tables
 ===========
+
+Paged virtual memory was invented along with virtual memory as a concept in
+1962 on the Ferranti Atlas Computer which was the first computer with paged
+virtual memory. The feature migrated to newer computers and became a de facto
+feature of all Unix-like systems as time went by. In 1985 the feature was
+included in the Intel 80386, which was the CPU Linux 1.0 was developed on.
+
+Page tables map virtual addresses as seen by the CPU into physical addresses
+as seen on the external memory bus.
+
+Linux defines page tables as a hierarchy which is currently five levels in
+height. The architecture code for each supported architecture will then
+map this to the restrictions of the hardware.
+
+The physical address corresponding to the virtual address is often referenced
+by the underlying physical page frame. The **page frame number** or **pfn**
+is the physical address of the page (as seen on the external memory bus)
+divided by `PAGE_SIZE`.
+
+Physical memory address 0 will be *pfn 0* and the highest pfn will be
+the last page of physical memory the external address bus of the CPU can
+address.
+
+With a page granularity of 4KB and a address range of 32 bits, pfn 0 is at
+address 0x00000000, pfn 1 is at address 0x00001000, pfn 2 is at 0x00002000
+and so on until we reach pfn 0xfffff at 0xfffff000. With 16KB pages pfs are
+at 0x00004000, 0x00008000 ... 0xffffc000 and pfn goes from 0 to 0x3fffff.
+
+As you can see, with 4KB pages the page base address uses bits 12-31 of the
+address, and this is why `PAGE_SHIFT` in this case is defined as 12 and
+`PAGE_SIZE` is usually defined in terms of the page shift as `(1 << PAGE_SHIFT)`
+
+Over time a deeper hierarchy has been developed in response to increasing memory
+sizes. When Linux was created, 4KB pages and a single page table called
+`swapper_pg_dir` with 1024 entries was used, covering 4MB which coincided with
+the fact that Torvald's first computer had 4MB of physical memory. Entries in
+this single table were referred to as *PTE*:s - page table entries.
+
+The software page table hierarchy reflects the fact that page table hardware has
+become hierarchical and that in turn is done to save page table memory and
+speed up mapping.
+
+One could of course imagine a single, linear page table with enormous amounts
+of entries, breaking down the whole memory into single pages. Such a page table
+would be very sparse, because large portions of the virtual memory usually
+remains unused. By using hierarchical page tables large holes in the virtual
+address space does not waste valuable page table memory, because it will suffice
+to mark large areas as unmapped at a higher level in the page table hierarchy.
+
+Additionally, on modern CPUs, a higher level page table entry can point directly
+to a physical memory range, which allows mapping a contiguous range of several
+megabytes or even gigabytes in a single high-level page table entry, taking
+shortcuts in mapping virtual memory to physical memory: there is no need to
+traverse deeper in the hierarchy when you find a large mapped range like this.
+
+The page table hierarchy has now developed into this::
+
+  +-----+
+  | PGD |
+  +-----+
+     |
+     |   +-----+
+     +-->| P4D |
+         +-----+
+            |
+            |   +-----+
+            +-->| PUD |
+                +-----+
+                   |
+                   |   +-----+
+                   +-->| PMD |
+                       +-----+
+                          |
+                          |   +-----+
+                          +-->| PTE |
+                              +-----+
+
+
+Symbols on the different levels of the page table hierarchy have the following
+meaning beginning from the bottom:
+
+- **pte**, `pte_t`, `pteval_t` = **Page Table Entry** - mentioned earlier.
+  The *pte* is an array of `PTRS_PER_PTE` elements of the `pteval_t` type, each
+  mapping a single page of virtual memory to a single page of physical memory.
+  The architecture defines the size and contents of `pteval_t`.
+
+  A typical example is that the `pteval_t` is a 32- or 64-bit value with the
+  upper bits being a **pfn** (page frame number), and the lower bits being some
+  architecture-specific bits such as memory protection.
+
+  The **entry** part of the name is a bit confusing because while in Linux 1.0
+  this did refer to a single page table entry in the single top level page
+  table, it was retrofitted to be an array of mapping elements when two-level
+  page tables were first introduced, so the *pte* is the lowermost page
+  *table*, not a page table *entry*.
+
+- **pmd**, `pmd_t`, `pmdval_t` = **Page Middle Directory**, the hierarchy right
+  above the *pte*, with `PTRS_PER_PMD` references to the *pte*:s.
+
+- **pud**, `pud_t`, `pudval_t` = **Page Upper Directory** was introduced after
+  the other levels to handle 4-level page tables. It is potentially unused,
+  or *folded* as we will discuss later.
+
+- **p4d**, `p4d_t`, `p4dval_t` = **Page Level 4 Directory** was introduced to
+  handle 5-level page tables after the *pud* was introduced. Now it was clear
+  that we needed to replace *pgd*, *pmd*, *pud* etc with a figure indicating the
+  directory level and that we cannot go on with ad hoc names any more. This
+  is only used on systems which actually have 5 levels of page tables, otherwise
+  it is folded.
+
+- **pgd**, `pgd_t`, `pgdval_t` = **Page Global Directory** - the Linux kernel
+  main page table handling the PGD for the kernel memory is still found in
+  `swapper_pg_dir`, but each userspace process in the system also has its own
+  memory context and thus its own *pgd*, found in `struct mm_struct` which
+  in turn is referenced to in each `struct task_struct`. So tasks have memory
+  context in the form of a `struct mm_struct` and this in turn has a
+  `struct pgt_t *pgd` pointer to the corresponding page global directory.
+
+To repeat: each level in the page table hierarchy is a *array of pointers*, so
+the **pgd** contains `PTRS_PER_PGD` pointers to the next level below, **p4d**
+contains `PTRS_PER_P4D` pointers to **pud** items and so on. The number of
+pointers on each level is architecture-defined.::
+
+        PMD
+  --> +-----+           PTE
+      | ptr |-------> +-----+
+      | ptr |-        | ptr |-------> PAGE
+      | ptr | \       | ptr |
+      | ptr |  \        ...
+      | ... |   \
+      | ptr |    \         PTE
+      +-----+     +----> +-----+
+                         | ptr |-------> PAGE
+                         | ptr |
+                           ...
+
+
+Page Table Folding
+==================
+
+If the architecture does not use all the page table levels, they can be *folded*
+which means skipped, and all operations performed on page tables will be
+compile-time augmented to just skip a level when accessing the next lower
+level.
+
+Page table handling code that wishes to be architecture-neutral, such as the
+virtual memory manager, will need to be written so that it traverses all of the
+currently five levels. This style should also be preferred for
+architecture-specific code, so as to be robust to future changes.
diff --git a/Documentation/mm/split_page_table_lock.rst b/Documentation/mm/split_page_table_lock.rst
index 50ee0dfc95be6..a834fad9de120 100644
--- a/Documentation/mm/split_page_table_lock.rst
+++ b/Documentation/mm/split_page_table_lock.rst
@@ -14,15 +14,20 @@ tables. Access to higher level tables protected by mm->page_table_lock.
 There are helpers to lock/unlock a table and other accessor functions:
 
  - pte_offset_map_lock()
-	maps pte and takes PTE table lock, returns pointer to the taken
-	lock;
+	maps PTE and takes PTE table lock, returns pointer to PTE with
+	pointer to its PTE table lock, or returns NULL if no PTE table;
+ - pte_offset_map_nolock()
+	maps PTE, returns pointer to PTE with pointer to its PTE table
+	lock (not taken), or returns NULL if no PTE table;
+ - pte_offset_map()
+	maps PTE, returns pointer to PTE, or returns NULL if no PTE table;
+ - pte_unmap()
+	unmaps PTE table;
  - pte_unmap_unlock()
 	unlocks and unmaps PTE table;
  - pte_alloc_map_lock()
-	allocates PTE table if needed and take the lock, returns pointer
-	to taken lock or NULL if allocation failed;
- - pte_lockptr()
-	returns pointer to PTE table lock;
+	allocates PTE table if needed and takes its lock, returns pointer to
+	PTE with pointer to its lock, or returns NULL if allocation failed;
  - pmd_lock()
 	takes PMD table lock, returns pointer to taken lock;
  - pmd_lockptr()
diff --git a/Documentation/netlink/genetlink-c.yaml b/Documentation/netlink/genetlink-c.yaml
index 8e8c17b0a6c65..57d1c1c4918f2 100644
--- a/Documentation/netlink/genetlink-c.yaml
+++ b/Documentation/netlink/genetlink-c.yaml
@@ -195,6 +195,16 @@ properties:
                     description: Max length for a string or a binary attribute.
                     $ref: '#/$defs/len-or-define'
               sub-type: *attr-type
+              display-hint: &display-hint
+                description: |
+                  Optional format indicator that is intended only for choosing
+                  the right formatting mechanism when displaying values of this
+                  type.
+                enum: [ hex, mac, fddi, ipv4, ipv6, uuid ]
+              # Start genetlink-c
+              name-prefix:
+                type: string
+              # End genetlink-c
 
       # Make sure name-prefix does not appear in subsets (subsets inherit naming)
       dependencies:
diff --git a/Documentation/netlink/genetlink-legacy.yaml b/Documentation/netlink/genetlink-legacy.yaml
index b33541a51d6bb..43b769c98fb27 100644
--- a/Documentation/netlink/genetlink-legacy.yaml
+++ b/Documentation/netlink/genetlink-legacy.yaml
@@ -119,9 +119,24 @@ properties:
               name:
                 type: string
               type:
-                enum: [ u8, u16, u32, u64, s8, s16, s32, s64, string ]
+                description: The netlink attribute type
+                enum: [ u8, u16, u32, u64, s8, s16, s32, s64, string, binary ]
               len:
                 $ref: '#/$defs/len-or-define'
+              byte-order:
+                enum: [ little-endian, big-endian ]
+              doc:
+                description: Documentation for the struct member attribute.
+                type: string
+              enum:
+                description: Name of the enum type used for the attribute.
+                type: string
+              display-hint: &display-hint
+                description: |
+                  Optional format indicator that is intended only for choosing
+                  the right formatting mechanism when displaying values of this
+                  type.
+                enum: [ hex, mac, fddi, ipv4, ipv6, uuid ]
         # End genetlink-legacy
 
   attribute-sets:
@@ -171,6 +186,7 @@ properties:
               name:
                 type: string
               type: &attr-type
+                description: The netlink attribute type
                 enum: [ unused, pad, flag, binary, u8, u16, u32, u64, s32, s64,
                         string, nest, array-nest, nest-type-value ]
               doc:
@@ -218,6 +234,11 @@ properties:
                     description: Max length for a string or a binary attribute.
                     $ref: '#/$defs/len-or-define'
               sub-type: *attr-type
+              display-hint: *display-hint
+              # Start genetlink-c
+              name-prefix:
+                type: string
+              # End genetlink-c
               # Start genetlink-legacy
               struct:
                 description: Name of the struct type used for the attribute.
diff --git a/Documentation/netlink/genetlink.yaml b/Documentation/netlink/genetlink.yaml
index d8b2cdeba058f..1cbb448d2f1c3 100644
--- a/Documentation/netlink/genetlink.yaml
+++ b/Documentation/netlink/genetlink.yaml
@@ -168,6 +168,12 @@ properties:
                     description: Max length for a string or a binary attribute.
                     $ref: '#/$defs/len-or-define'
               sub-type: *attr-type
+              display-hint: &display-hint
+                description: |
+                  Optional format indicator that is intended only for choosing
+                  the right formatting mechanism when displaying values of this
+                  type.
+                enum: [ hex, mac, fddi, ipv4, ipv6, uuid ]
 
       # Make sure name-prefix does not appear in subsets (subsets inherit naming)
       dependencies:
diff --git a/Documentation/netlink/specs/devlink.yaml b/Documentation/netlink/specs/devlink.yaml
index 90641668232e3..5d46ca9669792 100644
--- a/Documentation/netlink/specs/devlink.yaml
+++ b/Documentation/netlink/specs/devlink.yaml
@@ -9,6 +9,7 @@ doc: Partial family for Devlink.
 attribute-sets:
   -
     name: devlink
+    name-prefix: devlink-attr-
     attributes:
       -
         name: bus-name
@@ -95,10 +96,12 @@ attribute-sets:
       -
         name: reload-action-info
         type: nest
+        multi-attr: true
         nested-attributes: dl-reload-act-info
       -
         name: reload-action-stats
         type: nest
+        multi-attr: true
         nested-attributes: dl-reload-act-stats
   -
     name: dl-dev-stats
@@ -196,3 +199,8 @@ operations:
           attributes:
             - bus-name
             - dev-name
+            - info-driver-name
+            - info-serial-number
+            - info-version-fixed
+            - info-version-running
+            - info-version-stored
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 4846345bade46..837b565577ca6 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -9,8 +9,13 @@ doc: Partial family for Ethtool Netlink.
 definitions:
   -
     name: udp-tunnel-type
+    enum-name:
     type: enum
     entries: [ vxlan, geneve, vxlan-gpe ]
+  -
+    name: stringset
+    type: enum
+    entries: []
 
 attribute-sets:
   -
@@ -497,7 +502,7 @@ attribute-sets:
     attributes:
       -
         name: pad
-        type: u32
+        type: pad
       -
         name: tx-frames
         type: u64
@@ -577,7 +582,7 @@ attribute-sets:
         name: phc-index
         type: u32
   -
-    name: cable-test-ntf-nest-result
+    name: cable-result
     attributes:
       -
         name: pair
@@ -586,7 +591,7 @@ attribute-sets:
         name: code
         type: u8
   -
-    name: cable-test-ntf-nest-fault-length
+    name: cable-fault-length
     attributes:
       -
         name: pair
@@ -595,18 +600,25 @@ attribute-sets:
         name: cm
         type: u32
   -
-    name: cable-test-ntf-nest
+    name: cable-nest
     attributes:
       -
         name: result
         type: nest
-        nested-attributes: cable-test-ntf-nest-result
+        nested-attributes: cable-result
       -
         name: fault-length
         type: nest
-        nested-attributes: cable-test-ntf-nest-fault-length
+        nested-attributes: cable-fault-length
   -
     name: cable-test
+    attributes:
+      -
+        name: header
+        type: nest
+        nested-attributes: header
+  -
+    name: cable-test-ntf
     attributes:
       -
         name: header
@@ -618,7 +630,7 @@ attribute-sets:
       -
         name: nest
         type: nest
-        nested-attributes: cable-test-ntf-nest
+        nested-attributes: cable-nest
   -
     name: cable-test-tdr-cfg
     attributes:
@@ -632,8 +644,22 @@ attribute-sets:
         name: step
         type: u32
       -
-        name: pari
+        name: pair
         type: u8
+  -
+    name: cable-test-tdr-ntf
+    attributes:
+      -
+        name: header
+        type: nest
+        nested-attributes: header
+      -
+        name: status
+        type: u8
+      -
+        name: nest
+        type: nest
+        nested-attributes: cable-nest
   -
     name: cable-test-tdr
     attributes:
@@ -646,7 +672,7 @@ attribute-sets:
         type: nest
         nested-attributes: cable-test-tdr-cfg
   -
-    name: tunnel-info-udp-entry
+    name: tunnel-udp-entry
     attributes:
       -
         name: port
@@ -657,7 +683,7 @@ attribute-sets:
         type: u32
         enum: udp-tunnel-type
   -
-    name: tunnel-info-udp-table
+    name: tunnel-udp-table
     attributes:
       -
         name: size
@@ -667,9 +693,17 @@ attribute-sets:
         type: nest
         nested-attributes: bitset
       -
-        name: udp-ports
+        name: entry
         type: nest
-        nested-attributes: tunnel-info-udp-entry
+        multi-attr: true
+        nested-attributes: tunnel-udp-entry
+  -
+    name: tunnel-udp
+    attributes:
+      -
+        name: table
+        type: nest
+        nested-attributes: tunnel-udp-table
   -
     name: tunnel-info
     attributes:
@@ -680,13 +714,13 @@ attribute-sets:
       -
         name: udp-ports
         type: nest
-        nested-attributes: tunnel-info-udp-table
+        nested-attributes: tunnel-udp
   -
     name: fec-stat
     attributes:
       -
         name: pad
-        type: u8
+        type: pad
       -
         name: corrected
         type: binary
@@ -750,7 +784,7 @@ attribute-sets:
     attributes:
       -
         name: pad
-        type: u32
+        type: pad
       -
         name: id
         type: u32
@@ -759,16 +793,29 @@ attribute-sets:
         type: u32
       -
         name: stat
-        type: nest
-        nested-attributes: u64
+        type: u64
+        type-value: [ id ]
       -
         name: hist-rx
         type: nest
-        nested-attributes: u64
+        nested-attributes: stats-grp-hist
       -
         name: hist-tx
         type: nest
-        nested-attributes: u64
+        nested-attributes: stats-grp-hist
+      -
+        name: hist-bkt-low
+        type: u32
+      -
+        name: hist-bkt-hi
+        type: u32
+      -
+        name: hist-val
+        type: u64
+  -
+    name: stats-grp-hist
+    subset-of: stats-grp
+    attributes:
       -
         name: hist-bkt-low
         type: u32
@@ -783,7 +830,7 @@ attribute-sets:
     attributes:
       -
         name: pad
-        type: u32
+        type: pad
       -
         name: header
         type: nest
@@ -836,12 +883,15 @@ attribute-sets:
       -
         name: admin-state
         type: u32
+        name-prefix: ethtool-a-podl-pse-
       -
         name: admin-control
         type: u32
+        name-prefix: ethtool-a-podl-pse-
       -
         name: pw-d-status
         type: u32
+        name-prefix: ethtool-a-podl-pse-
   -
     name: rss
     attributes:
@@ -895,6 +945,7 @@ attribute-sets:
 
 operations:
   enum-model: directional
+  name-prefix: ethtool-msg-
   list:
     -
       name: strset-get
@@ -1348,10 +1399,16 @@ operations:
         request:
           attributes:
             - header
-        reply:
-          attributes:
-            - header
-            - cable-test-ntf-nest
+    -
+      name: cable-test-ntf
+      doc: Cable test notification.
+
+      attribute-set: cable-test-ntf
+
+      event:
+        attributes:
+          - header
+          - status
     -
       name: cable-test-tdr-act
       doc: Cable test TDR.
@@ -1362,10 +1419,17 @@ operations:
         request:
           attributes:
             - header
-        reply:
-          attributes:
-            - header
-            - cable-test-tdr-cfg
+    -
+      name: cable-test-tdr-ntf
+      doc: Cable test TDR notification.
+
+      attribute-set: cable-test-tdr-ntf
+
+      event:
+        attributes:
+          - header
+          - status
+          - nest
     -
       name: tunnel-info-get
       doc: Get tsinfo params.
diff --git a/Documentation/netlink/specs/ovs_datapath.yaml b/Documentation/netlink/specs/ovs_datapath.yaml
index 6d71db8c44163..f709c26c3e92d 100644
--- a/Documentation/netlink/specs/ovs_datapath.yaml
+++ b/Documentation/netlink/specs/ovs_datapath.yaml
@@ -3,6 +3,7 @@
 name: ovs_datapath
 version: 2
 protocol: genetlink-legacy
+uapi-header: linux/openvswitch.h
 
 doc:
   OVS datapath configuration over generic netlink.
@@ -18,6 +19,7 @@ definitions:
   -
     name: user-features
     type: flags
+    name-prefix: ovs-dp-f-
     entries:
       -
         name: unaligned
@@ -33,35 +35,37 @@ definitions:
         doc: Allow per-cpu dispatch of upcalls
   -
     name: datapath-stats
+    enum-name: ovs-dp-stats
     type: struct
     members:
       -
-        name: hit
+        name: n-hit
         type: u64
       -
-        name: missed
+        name: n-missed
         type: u64
       -
-        name: lost
+        name: n-lost
         type: u64
       -
-        name: flows
+        name: n-flows
         type: u64
   -
     name: megaflow-stats
+    enum-name: ovs-dp-megaflow-stats
     type: struct
     members:
       -
-        name: mask-hit
+        name: n-mask-hit
         type: u64
       -
-        name: masks
+        name: n-masks
         type: u32
       -
         name: padding
         type: u32
       -
-        name: cache-hits
+        name: n-cache-hit
         type: u64
       -
         name: pad1
@@ -70,6 +74,8 @@ definitions:
 attribute-sets:
   -
     name: datapath
+    name-prefix: ovs-dp-attr-
+    enum-name: ovs-datapath-attrs
     attributes:
       -
         name: name
@@ -101,12 +107,16 @@ attribute-sets:
         name: per-cpu-pids
         type: binary
         sub-type: u32
+      -
+        name: ifindex
+        type: u32
 
 operations:
   fixed-header: ovs-header
+  name-prefix: ovs-dp-cmd-
   list:
     -
-      name: dp-get
+      name: get
       doc: Get / dump OVS data path configuration and state
       value: 3
       attribute-set: datapath
@@ -125,7 +135,7 @@ operations:
             - per-cpu-pids
       dump: *dp-get-op
     -
-      name: dp-new
+      name: new
       doc: Create new OVS data path
       value: 1
       attribute-set: datapath
@@ -137,7 +147,7 @@ operations:
             - upcall-pid
             - user-features
     -
-      name: dp-del
+      name: del
       doc: Delete existing OVS data path
       value: 2
       attribute-set: datapath
diff --git a/Documentation/netlink/specs/ovs_flow.yaml b/Documentation/netlink/specs/ovs_flow.yaml
new file mode 100644
index 0000000000000..109ca1f57b6c6
--- /dev/null
+++ b/Documentation/netlink/specs/ovs_flow.yaml
@@ -0,0 +1,980 @@
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+
+name: ovs_flow
+version: 1
+protocol: genetlink-legacy
+uapi-header: linux/openvswitch.h
+
+doc:
+  OVS flow configuration over generic netlink.
+
+definitions:
+  -
+    name: ovs-header
+    type: struct
+    doc: |
+      Header for OVS Generic Netlink messages.
+    members:
+      -
+        name: dp-ifindex
+        type: u32
+        doc: |
+          ifindex of local port for datapath (0 to make a request not specific
+          to a datapath).
+  -
+    name: ovs-flow-stats
+    type: struct
+    members:
+      -
+        name: n-packets
+        type: u64
+        doc: Number of matched packets.
+      -
+        name: n-bytes
+        type: u64
+        doc: Number of matched bytes.
+  -
+    name: ovs-key-ethernet
+    type: struct
+    members:
+      -
+        name: eth-src
+        type: binary
+        len: 6
+        display-hint: mac
+      -
+        name: eth-dst
+        type: binary
+        len: 6
+        display-hint: mac
+  -
+    name: ovs-key-mpls
+    type: struct
+    members:
+      -
+        name: mpls-lse
+        type: u32
+        byte-order: big-endian
+  -
+    name: ovs-key-ipv4
+    type: struct
+    members:
+      -
+        name: ipv4-src
+        type: u32
+        byte-order: big-endian
+        display-hint: ipv4
+      -
+        name: ipv4-dst
+        type: u32
+        byte-order: big-endian
+        display-hint: ipv4
+      -
+        name: ipv4-proto
+        type: u8
+      -
+        name: ipv4-tos
+        type: u8
+      -
+        name: ipv4-ttl
+        type: u8
+      -
+        name: ipv4-frag
+        type: u8
+        enum: ovs-frag-type
+  -
+    name: ovs-key-ipv6
+    type: struct
+    members:
+      -
+        name: ipv6-src
+        type: binary
+        len: 16
+        byte-order: big-endian
+        display-hint: ipv6
+      -
+        name: ipv6-dst
+        type: binary
+        len: 16
+        byte-order: big-endian
+        display-hint: ipv6
+      -
+        name: ipv6-label
+        type: u32
+        byte-order: big-endian
+      -
+        name: ipv6-proto
+        type: u8
+      -
+        name: ipv6-tclass
+        type: u8
+      -
+        name: ipv6-hlimit
+        type: u8
+      -
+        name: ipv6-frag
+        type: u8
+  -
+    name: ovs-key-ipv6-exthdrs
+    type: struct
+    members:
+      -
+        name: hdrs
+        type: u16
+  -
+    name: ovs-frag-type
+    name-prefix: ovs-frag-type-
+    type: enum
+    entries:
+      -
+        name: none
+        doc: Packet is not a fragment.
+      -
+        name: first
+        doc: Packet is a fragment with offset 0.
+      -
+        name: later
+        doc: Packet is a fragment with nonzero offset.
+      -
+        name: any
+        value: 255
+  -
+    name: ovs-key-tcp
+    type: struct
+    members:
+      -
+        name: tcp-src
+        type: u16
+        byte-order: big-endian
+      -
+        name: tcp-dst
+        type: u16
+        byte-order: big-endian
+  -
+    name: ovs-key-udp
+    type: struct
+    members:
+      -
+        name: udp-src
+        type: u16
+        byte-order: big-endian
+      -
+        name: udp-dst
+        type: u16
+        byte-order: big-endian
+  -
+    name: ovs-key-sctp
+    type: struct
+    members:
+      -
+        name: sctp-src
+        type: u16
+        byte-order: big-endian
+      -
+        name: sctp-dst
+        type: u16
+        byte-order: big-endian
+  -
+    name: ovs-key-icmp
+    type: struct
+    members:
+      -
+        name: icmp-type
+        type: u8
+      -
+        name: icmp-code
+        type: u8
+  -
+    name: ovs-key-arp
+    type: struct
+    members:
+      -
+        name: arp-sip
+        type: u32
+        byte-order: big-endian
+      -
+        name: arp-tip
+        type: u32
+        byte-order: big-endian
+      -
+        name: arp-op
+        type: u16
+        byte-order: big-endian
+      -
+        name: arp-sha
+        type: binary
+        len: 6
+        display-hint: mac
+      -
+        name: arp-tha
+        type: binary
+        len: 6
+        display-hint: mac
+  -
+    name: ovs-key-nd
+    type: struct
+    members:
+      -
+        name: nd_target
+        type: binary
+        len: 16
+        byte-order: big-endian
+      -
+        name: nd-sll
+        type: binary
+        len: 6
+        display-hint: mac
+      -
+        name: nd-tll
+        type: binary
+        len: 6
+        display-hint: mac
+  -
+    name: ovs-key-ct-tuple-ipv4
+    type: struct
+    members:
+      -
+        name: ipv4-src
+        type: u32
+        byte-order: big-endian
+      -
+        name: ipv4-dst
+        type: u32
+        byte-order: big-endian
+      -
+        name: src-port
+        type: u16
+        byte-order: big-endian
+      -
+        name: dst-port
+        type: u16
+        byte-order: big-endian
+      -
+        name: ipv4-proto
+        type: u8
+  -
+    name: ovs-action-push-vlan
+    type: struct
+    members:
+      -
+        name: vlan_tpid
+        type: u16
+        byte-order: big-endian
+        doc: Tag protocol identifier (TPID) to push.
+      -
+        name: vlan_tci
+        type: u16
+        byte-order: big-endian
+        doc: Tag control identifier (TCI) to push.
+  -
+    name: ovs-ufid-flags
+    name-prefix: ovs-ufid-f-
+    type: flags
+    entries:
+      - omit-key
+      - omit-mask
+      - omit-actions
+  -
+    name: ovs-action-hash
+    type: struct
+    members:
+      -
+        name: hash-alg
+        type: u32
+        doc: Algorithm used to compute hash prior to recirculation.
+      -
+        name: hash-basis
+        type: u32
+        doc: Basis used for computing hash.
+  -
+    name: ovs-hash-alg
+    type: enum
+    doc: |
+      Data path hash algorithm for computing Datapath hash. The algorithm type only specifies
+      the fields in a flow will be used as part of the hash. Each datapath is free to use its
+      own hash algorithm. The hash value will be opaque to the user space daemon.
+    entries:
+      - ovs-hash-alg-l4
+
+  -
+    name: ovs-action-push-mpls
+    type: struct
+    members:
+      -
+        name: mpls-lse
+        type: u32
+        byte-order: big-endian
+        doc: |
+          MPLS label stack entry to push
+      -
+        name: mpls-ethertype
+        type: u32
+        byte-order: big-endian
+        doc: |
+          Ethertype to set in the encapsulating ethernet frame.  The only values
+          ethertype should ever be given are ETH_P_MPLS_UC and ETH_P_MPLS_MC,
+          indicating MPLS unicast or multicast. Other are rejected.
+  -
+    name: ovs-action-add-mpls
+    type: struct
+    members:
+      -
+        name: mpls-lse
+        type: u32
+        byte-order: big-endian
+        doc: |
+          MPLS label stack entry to push
+      -
+        name: mpls-ethertype
+        type: u32
+        byte-order: big-endian
+        doc: |
+          Ethertype to set in the encapsulating ethernet frame.  The only values
+          ethertype should ever be given are ETH_P_MPLS_UC and ETH_P_MPLS_MC,
+          indicating MPLS unicast or multicast. Other are rejected.
+      -
+        name: tun-flags
+        type: u16
+        doc: |
+          MPLS tunnel attributes.
+  -
+    name: ct-state-flags
+    type: flags
+    name-prefix: ovs-cs-f-
+    entries:
+      -
+        name: new
+        doc: Beginning of a new connection.
+      -
+        name: established
+        doc: Part of an existing connenction
+      -
+        name: related
+        doc: Related to an existing connection.
+      -
+        name: reply-dir
+        doc: Flow is in the reply direction.
+      -
+        name: invalid
+        doc: Could not track the connection.
+      -
+        name: tracked
+        doc: Conntrack has occurred.
+      -
+        name: src-nat
+        doc: Packet's source address/port was mangled by NAT.
+      -
+        name: dst-nat
+        doc: Packet's destination address/port was mangled by NAT.
+
+attribute-sets:
+  -
+    name: flow-attrs
+    enum-name: ovs-flow-attr
+    name-prefix: ovs-flow-attr-
+    attributes:
+      -
+        name: key
+        type: nest
+        nested-attributes: key-attrs
+        doc: |
+          Nested attributes specifying the flow key. Always present in
+          notifications. Required for all requests (except dumps).
+      -
+        name: actions
+        type: nest
+        nested-attributes: action-attrs
+        doc: |
+          Nested attributes specifying the actions to take for packets that
+          match the key. Always present in notifications. Required for
+          OVS_FLOW_CMD_NEW requests, optional for OVS_FLOW_CMD_SET requests.  An
+          OVS_FLOW_CMD_SET without OVS_FLOW_ATTR_ACTIONS will not modify the
+          actions.  To clear the actions, an OVS_FLOW_ATTR_ACTIONS without any
+          nested attributes must be given.
+      -
+        name: stats
+        type: binary
+        struct: ovs-flow-stats
+        doc: |
+          Statistics for this flow. Present in notifications if the stats would
+          be nonzero. Ignored in requests.
+      -
+        name: tcp-flags
+        type: u8
+        doc: |
+          An 8-bit value giving the ORed value of all of the TCP flags seen on
+          packets in this flow. Only present in notifications for TCP flows, and
+          only if it would be nonzero. Ignored in requests.
+      -
+        name: used
+        type: u64
+        doc: |
+          A 64-bit integer giving the time, in milliseconds on the system
+          monotonic clock, at which a packet was last processed for this
+          flow. Only present in notifications if a packet has been processed for
+          this flow. Ignored in requests.
+      -
+        name: clear
+        type: flag
+        doc: |
+          If present in a OVS_FLOW_CMD_SET request, clears the last-used time,
+          accumulated TCP flags, and statistics for this flow.  Otherwise
+          ignored in requests. Never present in notifications.
+      -
+        name: mask
+        type: nest
+        nested-attributes: key-attrs
+        doc: |
+          Nested attributes specifying the mask bits for wildcarded flow
+          match. Mask bit value '1' specifies exact match with corresponding
+          flow key bit, while mask bit value '0' specifies a wildcarded
+          match. Omitting attribute is treated as wildcarding all corresponding
+          fields. Optional for all requests. If not present, all flow key bits
+          are exact match bits.
+      -
+        name: probe
+        type: binary
+        doc: |
+          Flow operation is a feature probe, error logging should be suppressed.
+      -
+        name: ufid
+        type: binary
+        doc: |
+          A value between 1-16 octets specifying a unique identifier for the
+          flow. Causes the flow to be indexed by this value rather than the
+          value of the OVS_FLOW_ATTR_KEY attribute. Optional for all
+          requests. Present in notifications if the flow was created with this
+          attribute.
+        display-hint: uuid
+      -
+        name: ufid-flags
+        type: u32
+        enum: ovs-ufid-flags
+        doc: |
+          A 32-bit value of ORed flags that provide alternative semantics for
+          flow installation and retrieval. Optional for all requests.
+      -
+        name: pad
+        type: binary
+
+  -
+    name: key-attrs
+    enum-name: ovs-key-attr
+    name-prefix: ovs-key-attr-
+    attributes:
+      -
+        name: encap
+        type: nest
+        nested-attributes: key-attrs
+      -
+        name: priority
+        type: u32
+      -
+        name: in-port
+        type: u32
+      -
+        name: ethernet
+        type: binary
+        struct: ovs-key-ethernet
+        doc: struct ovs_key_ethernet
+      -
+        name: vlan
+        type: u16
+        byte-order: big-endian
+      -
+        name: ethertype
+        type: u16
+        byte-order: big-endian
+      -
+        name: ipv4
+        type: binary
+        struct: ovs-key-ipv4
+      -
+        name: ipv6
+        type: binary
+        struct: ovs-key-ipv6
+        doc: struct ovs_key_ipv6
+      -
+        name: tcp
+        type: binary
+        struct: ovs-key-tcp
+      -
+        name: udp
+        type: binary
+        struct: ovs-key-udp
+      -
+        name: icmp
+        type: binary
+        struct: ovs-key-icmp
+      -
+        name: icmpv6
+        type: binary
+        struct: ovs-key-icmp
+      -
+        name: arp
+        type: binary
+        struct: ovs-key-arp
+        doc: struct ovs_key_arp
+      -
+        name: nd
+        type: binary
+        struct: ovs-key-nd
+        doc: struct ovs_key_nd
+      -
+        name: skb-mark
+        type: u32
+      -
+        name: tunnel
+        type: nest
+        nested-attributes: tunnel-key-attrs
+      -
+        name: sctp
+        type: binary
+        struct: ovs-key-sctp
+      -
+        name: tcp-flags
+        type: u16
+        byte-order: big-endian
+      -
+        name: dp-hash
+        type: u32
+        doc: Value 0 indicates the hash is not computed by the datapath.
+      -
+        name: recirc-id
+        type: u32
+      -
+        name: mpls
+        type: binary
+        struct: ovs-key-mpls
+      -
+        name: ct-state
+        type: u32
+        enum: ct-state-flags
+        enum-as-flags: true
+      -
+        name: ct-zone
+        type: u16
+        doc: connection tracking zone
+      -
+        name: ct-mark
+        type: u32
+        doc: connection tracking mark
+      -
+        name: ct-labels
+        type: binary
+        display-hint: hex
+        doc: 16-octet connection tracking label
+      -
+        name: ct-orig-tuple-ipv4
+        type: binary
+        struct: ovs-key-ct-tuple-ipv4
+      -
+        name: ct-orig-tuple-ipv6
+        type: binary
+        doc: struct ovs_key_ct_tuple_ipv6
+      -
+        name: nsh
+        type: nest
+        nested-attributes: ovs-nsh-key-attrs
+      -
+        name: packet-type
+        type: u32
+        byte-order: big-endian
+        doc: Should not be sent to the kernel
+      -
+        name: nd-extensions
+        type: binary
+        doc: Should not be sent to the kernel
+      -
+        name: tunnel-info
+        type: binary
+        doc: struct ip_tunnel_info
+      -
+        name: ipv6-exthdrs
+        type: binary
+        struct: ovs-key-ipv6-exthdrs
+        doc: struct ovs_key_ipv6_exthdr
+  -
+    name: action-attrs
+    enum-name: ovs-action-attr
+    name-prefix: ovs-action-attr-
+    attributes:
+      -
+        name: output
+        type: u32
+        doc: ovs port number in datapath
+      -
+        name: userspace
+        type: nest
+        nested-attributes: userspace-attrs
+      -
+        name: set
+        type: nest
+        nested-attributes: key-attrs
+        doc: Replaces the contents of an existing header. The single nested attribute specifies a header to modify and its value.
+      -
+        name: push-vlan
+        type: binary
+        struct: ovs-action-push-vlan
+        doc: Push a new outermost 802.1Q or 802.1ad header onto the packet.
+      -
+        name: pop-vlan
+        type: flag
+        doc: Pop the outermost 802.1Q or 802.1ad header from the packet.
+      -
+        name: sample
+        type: nest
+        nested-attributes: sample-attrs
+        doc: |
+          Probabilistically executes actions, as specified in the nested attributes.
+      -
+        name: recirc
+        type: u32
+        doc: recirc id
+      -
+        name: hash
+        type: binary
+        struct: ovs-action-hash
+      -
+        name: push-mpls
+        type: binary
+        struct: ovs-action-push-mpls
+        doc: |
+          Push a new MPLS label stack entry onto the top of the packets MPLS
+          label stack. Set the ethertype of the encapsulating frame to either
+          ETH_P_MPLS_UC or ETH_P_MPLS_MC to indicate the new packet contents.
+      -
+        name: pop-mpls
+        type: u16
+        byte-order: big-endian
+        doc: ethertype
+      -
+        name: set-masked
+        type: nest
+        nested-attributes: key-attrs
+        doc: |
+          Replaces the contents of an existing header. A nested attribute
+          specifies a header to modify, its value, and a mask. For every bit set
+          in the mask, the corresponding bit value is copied from the value to
+          the packet header field, rest of the bits are left unchanged. The
+          non-masked value bits must be passed in as zeroes. Masking is not
+          supported for the OVS_KEY_ATTR_TUNNEL attribute.
+      -
+        name: ct
+        type: nest
+        nested-attributes: ct-attrs
+        doc: |
+          Track the connection. Populate the conntrack-related entries
+          in the flow key.
+      -
+        name: trunc
+        type: u32
+        doc: struct ovs_action_trunc is a u32 max length
+      -
+        name: push-eth
+        type: binary
+        doc: struct ovs_action_push_eth
+      -
+        name: pop-eth
+        type: flag
+      -
+        name: ct-clear
+        type: flag
+      -
+        name: push-nsh
+        type: nest
+        nested-attributes: ovs-nsh-key-attrs
+        doc: |
+          Push NSH header to the packet.
+      -
+        name: pop-nsh
+        type: flag
+        doc: |
+          Pop the outermost NSH header off the packet.
+      -
+        name: meter
+        type: u32
+        doc: |
+          Run packet through a meter, which may drop the packet, or modify the
+          packet (e.g., change the DSCP field)
+      -
+        name: clone
+        type: nest
+        nested-attributes: action-attrs
+        doc: |
+          Make a copy of the packet and execute a list of actions without
+          affecting the original packet and key.
+      -
+        name: check-pkt-len
+        type: nest
+        nested-attributes: check-pkt-len-attrs
+        doc: |
+          Check the packet length and execute a set of actions if greater than
+          the specified packet length, else execute another set of actions.
+      -
+        name: add-mpls
+        type: binary
+        struct: ovs-action-add-mpls
+        doc: |
+          Push a new MPLS label stack entry at the start of the packet or at the
+          start of the l3 header depending on the value of l3 tunnel flag in the
+          tun_flags field of this OVS_ACTION_ATTR_ADD_MPLS argument.
+      -
+        name: dec-ttl
+        type: nest
+        nested-attributes: dec-ttl-attrs
+  -
+    name: tunnel-key-attrs
+    enum-name: ovs-tunnel-key-attr
+    name-prefix: ovs-tunnel-key-attr-
+    attributes:
+      -
+        name: id
+        type: u64
+        byte-order: big-endian
+        value: 0
+      -
+        name: ipv4-src
+        type: u32
+        byte-order: big-endian
+      -
+        name: ipv4-dst
+        type: u32
+        byte-order: big-endian
+      -
+        name: tos
+        type: u8
+      -
+        name: ttl
+        type: u8
+      -
+        name: dont-fragment
+        type: flag
+      -
+        name: csum
+        type: flag
+      -
+        name: oam
+        type: flag
+      -
+        name: geneve-opts
+        type: binary
+        sub-type: u32
+      -
+        name: tp-src
+        type: u16
+        byte-order: big-endian
+      -
+        name: tp-dst
+        type: u16
+        byte-order: big-endian
+      -
+        name: vxlan-opts
+        type: nest
+        nested-attributes: vxlan-ext-attrs
+      -
+        name: ipv6-src
+        type: binary
+        doc: |
+          struct in6_addr source IPv6 address
+      -
+        name: ipv6-dst
+        type: binary
+        doc: |
+          struct in6_addr destination IPv6 address
+      -
+        name: pad
+        type: binary
+      -
+        name: erspan-opts
+        type: binary
+        doc: |
+          struct erspan_metadata
+      -
+        name: ipv4-info-bridge
+        type: flag
+  -
+    name: check-pkt-len-attrs
+    enum-name: ovs-check-pkt-len-attr
+    name-prefix: ovs-check-pkt-len-attr-
+    attributes:
+      -
+        name: pkt-len
+        type: u16
+      -
+        name: actions-if-greater
+        type: nest
+        nested-attributes: action-attrs
+      -
+        name: actions-if-less-equal
+        type: nest
+        nested-attributes: action-attrs
+  -
+    name: sample-attrs
+    enum-name: ovs-sample-attr
+    name-prefix: ovs-sample-attr-
+    attributes:
+      -
+        name: probability
+        type: u32
+      -
+        name: actions
+        type: nest
+        nested-attributes: action-attrs
+  -
+    name: userspace-attrs
+    enum-name: ovs-userspace-attr
+    name-prefix: ovs-userspace-attr-
+    attributes:
+      -
+        name: pid
+        type: u32
+      -
+        name: userdata
+        type: binary
+      -
+        name: egress-tun-port
+        type: u32
+      -
+        name: actions
+        type: flag
+  -
+    name: ovs-nsh-key-attrs
+    enum-name: ovs-nsh-key-attr
+    name-prefix: ovs-nsh-key-attr-
+    attributes:
+      -
+        name: base
+        type: binary
+      -
+        name: md1
+        type: binary
+      -
+        name: md2
+        type: binary
+  -
+    name: ct-attrs
+    enum-name: ovs-ct-attr
+    name-prefix: ovs-ct-attr-
+    attributes:
+      -
+        name: commit
+        type: flag
+      -
+        name: zone
+        type: u16
+      -
+        name: mark
+        type: binary
+      -
+        name: labels
+        type: binary
+      -
+        name: helper
+        type: string
+      -
+        name: nat
+        type: nest
+        nested-attributes: nat-attrs
+      -
+        name: force-commit
+        type: flag
+      -
+        name: eventmask
+        type: u32
+      -
+        name: timeout
+        type: string
+  -
+    name: nat-attrs
+    enum-name: ovs-nat-attr
+    name-prefix: ovs-nat-attr-
+    attributes:
+      -
+        name: src
+        type: flag
+      -
+        name: dst
+        type: flag
+      -
+        name: ip-min
+        type: binary
+      -
+        name: ip-max
+        type: binary
+      -
+        name: proto-min
+        type: u16
+      -
+        name: proto-max
+        type: u16
+      -
+        name: persistent
+        type: flag
+      -
+        name: proto-hash
+        type: flag
+      -
+        name: proto-random
+        type: flag
+  -
+    name: dec-ttl-attrs
+    enum-name: ovs-dec-ttl-attr
+    name-prefix: ovs-dec-ttl-attr-
+    attributes:
+      -
+        name: action
+        type: nest
+        nested-attributes: action-attrs
+  -
+    name: vxlan-ext-attrs
+    enum-name: ovs-vxlan-ext-
+    name-prefix: ovs-vxlan-ext-
+    attributes:
+      -
+        name: gbp
+        type: u32
+
+operations:
+  name-prefix: ovs-flow-cmd-
+  fixed-header: ovs-header
+  list:
+    -
+      name: get
+      doc: Get / dump OVS flow configuration and state
+      value: 3
+      attribute-set: flow-attrs
+      do: &flow-get-op
+        request:
+          attributes:
+            - dp-ifindex
+            - key
+            - ufid
+            - ufid-flags
+        reply:
+          attributes:
+            - dp-ifindex
+            - key
+            - ufid
+            - mask
+            - stats
+            - actions
+      dump: *flow-get-op
+    -
+      name: new
+      doc: Create OVS flow configuration in a data path
+      value: 1
+      attribute-set: flow-attrs
+      do:
+        request:
+          attributes:
+            - dp-ifindex
+            - key
+            - ufid
+            - mask
+            - actions
+
+mcast-groups:
+  list:
+    -
+      name: ovs_flow
diff --git a/Documentation/netlink/specs/ovs_vport.yaml b/Documentation/netlink/specs/ovs_vport.yaml
index 8e55622ddf110..17336455bec14 100644
--- a/Documentation/netlink/specs/ovs_vport.yaml
+++ b/Documentation/netlink/specs/ovs_vport.yaml
@@ -3,6 +3,7 @@
 name: ovs_vport
 version: 2
 protocol: genetlink-legacy
+uapi-header: linux/openvswitch.h
 
 doc:
   OVS vport configuration over generic netlink.
@@ -18,10 +19,13 @@ definitions:
   -
     name: vport-type
     type: enum
+    enum-name: ovs-vport-type
+    name-prefix: ovs-vport-type-
     entries: [ unspec, netdev, internal, gre, vxlan, geneve ]
   -
     name: vport-stats
     type: struct
+    enum-name: ovs-vport-stats
     members:
       -
         name: rx-packets
@@ -51,6 +55,8 @@ definitions:
 attribute-sets:
   -
     name: vport-options
+    enum-name: ovs-vport-options
+    name-prefix: ovs-tunnel-attr-
     attributes:
       -
         name: dst-port
@@ -60,6 +66,8 @@ attribute-sets:
         type: u32
   -
     name: upcall-stats
+    enum-name: ovs-vport-upcall-attr
+    name-prefix: ovs-vport-upcall-attr-
     attributes:
       -
         name: success
@@ -70,6 +78,8 @@ attribute-sets:
         type: u64
   -
     name: vport
+    name-prefix: ovs-vport-attr-
+    enum-name: ovs-vport-attr
     attributes:
       -
         name: port-no
@@ -108,9 +118,10 @@ attribute-sets:
         nested-attributes: upcall-stats
 
 operations:
+  name-prefix: ovs-vport-cmd-
   list:
     -
-      name: vport-get
+      name: get
       doc: Get / dump OVS vport configuration and state
       value: 3
       attribute-set: vport
diff --git a/Documentation/networking/af_xdp.rst b/Documentation/networking/af_xdp.rst
index 247c6c4127e94..1cc35de336a41 100644
--- a/Documentation/networking/af_xdp.rst
+++ b/Documentation/networking/af_xdp.rst
@@ -433,6 +433,15 @@ start N bytes into the buffer leaving the first N bytes for the
 application to use. The final option is the flags field, but it will
 be dealt with in separate sections for each UMEM flag.
 
+SO_BINDTODEVICE setsockopt
+--------------------------
+
+This is a generic SOL_SOCKET option that can be used to tie AF_XDP
+socket to a particular network interface.  It is useful when a socket
+is created by a privileged process and passed to a non-privileged one.
+Once the option is set, kernel will refuse attempts to bind that socket
+to a different interface.  Updating the value requires CAP_NET_RAW.
+
 XDP_STATISTICS getsockopt
 -------------------------
 
diff --git a/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst b/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst
index 4118384cf8ebe..289c146a82915 100644
--- a/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst
+++ b/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst
@@ -190,8 +190,7 @@ MAP header|IP Packet|Optional padding|MAP header|Command Packet|Optional pad...
 3. Userspace configuration
 ==========================
 
-rmnet userspace configuration is done through netlink library librmnetctl
-and command line utility rmnetcli. Utility is hosted in codeaurora forum git.
-The driver uses rtnl_link_ops for communication.
+rmnet userspace configuration is done through netlink using iproute2
+https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/
 
-https://source.codeaurora.org/quic/la/platform/vendor/qcom-opensource/dataservices/tree/rmnetctl
+The driver uses rtnl_link_ops for communication.
diff --git a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
index 8bcb173e0353f..5eaa3ab6c73e7 100644
--- a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
+++ b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
@@ -38,6 +38,7 @@ debug logs.
 
 Some of the ENA devices support a working mode called Low-latency
 Queue (LLQ), which saves several more microseconds.
+
 ENA Source Code Directory Structure
 ===================================
 
@@ -205,6 +206,8 @@ Adaptive coalescing can be switched on/off through `ethtool(8)`'s
 More information about Adaptive Interrupt Moderation (DIM) can be found in
 Documentation/networking/net_dim.rst
 
+.. _`RX copybreak`:
+
 RX copybreak
 ============
 The rx_copybreak is initialized by default to ENA_DEFAULT_RX_COPYBREAK
@@ -315,3 +318,34 @@ Rx
 - The new SKB is updated with the necessary information (protocol,
   checksum hw verify result, etc), and then passed to the network
   stack, using the NAPI interface function :code:`napi_gro_receive()`.
+
+Dynamic RX Buffers (DRB)
+------------------------
+
+Each RX descriptor in the RX ring is a single memory page (which is either 4KB
+or 16KB long depending on system's configurations).
+To reduce the memory allocations required when dealing with a high rate of small
+packets, the driver tries to reuse the remaining RX descriptor's space if more
+than 2KB of this page remain unused.
+
+A simple example of this mechanism is the following sequence of events:
+
+::
+
+        1. Driver allocates page-sized RX buffer and passes it to hardware
+                +----------------------+
+                |4KB RX Buffer         |
+                +----------------------+
+
+        2. A 300Bytes packet is received on this buffer
+
+        3. The driver increases the ref count on this page and returns it back to
+           HW as an RX buffer of size 4KB - 300Bytes = 3796 Bytes
+               +----+--------------------+
+               |****|3796 Bytes RX Buffer|
+               +----+--------------------+
+
+This mechanism isn't used when an XDP program is loaded, or when the
+RX packet is less than rx_copybreak bytes (in which case the packet is
+copied out of the RX buffer into the linear part of a new skb allocated
+for it and the RX buffer remains the same size, see `RX copybreak`_).
diff --git a/Documentation/networking/device_drivers/ethernet/amd/pds_vdpa.rst b/Documentation/networking/device_drivers/ethernet/amd/pds_vdpa.rst
new file mode 100644
index 0000000000000..587927d3de92a
--- /dev/null
+++ b/Documentation/networking/device_drivers/ethernet/amd/pds_vdpa.rst
@@ -0,0 +1,85 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. note: can be edited and viewed with /usr/bin/formiko-vim
+
+==========================================================
+PCI vDPA driver for the AMD/Pensando(R) DSC adapter family
+==========================================================
+
+AMD/Pensando vDPA VF Device Driver
+
+Copyright(c) 2023 Advanced Micro Devices, Inc
+
+Overview
+========
+
+The ``pds_vdpa`` driver is an auxiliary bus driver that supplies
+a vDPA device for use by the virtio network stack.  It is used with
+the Pensando Virtual Function devices that offer vDPA and virtio queue
+services.  It depends on the ``pds_core`` driver and hardware for the PF
+and VF PCI handling as well as for device configuration services.
+
+Using the device
+================
+
+The ``pds_vdpa`` device is enabled via multiple configuration steps and
+depends on the ``pds_core`` driver to create and enable SR-IOV Virtual
+Function devices.  After the VFs are enabled, we enable the vDPA service
+in the ``pds_core`` device to create the auxiliary devices used by pds_vdpa.
+
+Example steps:
+
+.. code-block:: bash
+
+  #!/bin/bash
+
+  modprobe pds_core
+  modprobe vdpa
+  modprobe pds_vdpa
+
+  PF_BDF=`ls /sys/module/pds_core/drivers/pci\:pds_core/*/sriov_numvfs | awk -F / '{print $7}'`
+
+  # Enable vDPA VF auxiliary device(s) in the PF
+  devlink dev param set pci/$PF_BDF name enable_vnet cmode runtime value true
+
+  # Create a VF for vDPA use
+  echo 1 > /sys/bus/pci/drivers/pds_core/$PF_BDF/sriov_numvfs
+
+  # Find the vDPA services/devices available
+  PDS_VDPA_MGMT=`vdpa mgmtdev show | grep vDPA | head -1 | cut -d: -f1`
+
+  # Create a vDPA device for use in virtio network configurations
+  vdpa dev add name vdpa1 mgmtdev $PDS_VDPA_MGMT mac 00:11:22:33:44:55
+
+  # Set up an ethernet interface on the vdpa device
+  modprobe virtio_vdpa
+
+
+
+Enabling the driver
+===================
+
+The driver is enabled via the standard kernel configuration system,
+using the make command::
+
+  make oldconfig/menuconfig/etc.
+
+The driver is located in the menu structure at:
+
+  -> Device Drivers
+    -> Network device support (NETDEVICES [=y])
+      -> Ethernet driver support
+        -> Pensando devices
+          -> Pensando Ethernet PDS_VDPA Support
+
+Support
+=======
+
+For general Linux networking support, please use the netdev mailing
+list, which is monitored by Pensando personnel::
+
+  netdev@vger.kernel.org
+
+For more specific support needs, please use the Pensando driver support
+email::
+
+  drivers@pensando.io
diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst
index 417ca514a4d05..94ecb67c08850 100644
--- a/Documentation/networking/device_drivers/ethernet/index.rst
+++ b/Documentation/networking/device_drivers/ethernet/index.rst
@@ -15,6 +15,7 @@ Contents:
    amazon/ena
    altera/altera_tse
    amd/pds_core
+   amd/pds_vdpa
    aquantia/atlantic
    chelsio/cxgb
    cirrus/cs89x0
diff --git a/Documentation/networking/device_drivers/ethernet/intel/ice.rst b/Documentation/networking/device_drivers/ethernet/intel/ice.rst
index 69695e5511f42..e4d065c55ea8d 100644
--- a/Documentation/networking/device_drivers/ethernet/intel/ice.rst
+++ b/Documentation/networking/device_drivers/ethernet/intel/ice.rst
@@ -84,24 +84,6 @@ Once the VM shuts down, or otherwise releases the VF, the command will
 complete.
 
 
-Important notes for SR-IOV and Link Aggregation
------------------------------------------------
-Link Aggregation is mutually exclusive with SR-IOV.
-
-- If Link Aggregation is active, SR-IOV VFs cannot be created on the PF.
-- If SR-IOV is active, you cannot set up Link Aggregation on the interface.
-
-Bridging and MACVLAN are also affected by this. If you wish to use bridging or
-MACVLAN with SR-IOV, you must set up bridging or MACVLAN before enabling
-SR-IOV. If you are using bridging or MACVLAN in conjunction with SR-IOV, and
-you want to remove the interface from the bridge or MACVLAN, you must follow
-these steps:
-
-1. Destroy SR-IOV VFs if they exist
-2. Remove the interface from the bridge or MACVLAN
-3. Recreate SRIOV VFs as needed
-
-
 Additional Features and Configurations
 ======================================
 
diff --git a/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst b/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
index 5ba9015336e2e..bfd233cfac352 100644
--- a/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
+++ b/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
@@ -13,6 +13,7 @@ Contents
 - `Drivers`_
 - `Basic packet flow`_
 - `Devlink health reporters`_
+- `Quality of service`_
 
 Overview
 ========
@@ -287,3 +288,47 @@ For example::
 	 NIX_AF_ERR:
 	        NIX Error Interrupt Reg : 64
 	        Rx on unmapped PF_FUNC
+
+
+Quality of service
+==================
+
+
+Hardware algorithms used in scheduling
+--------------------------------------
+
+octeontx2 silicon and CN10K transmit interface consists of five transmit levels
+starting from SMQ/MDQ, TL4 to TL1. Each packet will traverse MDQ, TL4 to TL1
+levels. Each level contains an array of queues to support scheduling and shaping.
+The hardware uses the below algorithms depending on the priority of scheduler queues.
+once the usercreates tc classes with different priorities, the driver configures
+schedulers allocated to the class with specified priority along with rate-limiting
+configuration.
+
+1. Strict Priority
+
+      -  Once packets are submitted to MDQ, hardware picks all active MDQs having different priority
+         using strict priority.
+
+2. Round Robin
+
+      - Active MDQs having the same priority level are chosen using round robin.
+
+
+Setup HTB offload
+-----------------
+
+1. Enable HW TC offload on the interface::
+
+        # ethtool -K <interface> hw-tc-offload on
+
+2. Crate htb root::
+
+        # tc qdisc add dev <interface> clsact
+        # tc qdisc replace dev <interface> root handle 1: htb offload
+
+3. Create tc classes with different priorities::
+
+        # tc class add dev <interface> parent 1: classid 1:1 htb rate 10Gbit prio 1
+
+        # tc class add dev <interface> parent 1: classid 1:2 htb rate 10Gbit prio 7
diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst
index 6b2d1fe74ecf2..a395df9c27513 100644
--- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst
+++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst
@@ -797,6 +797,16 @@ Counters on the NIC port that is connected to a eSwitch.
        RoCE/UD/RC traffic) [#accel]_.
      - Acceleration
 
+   * - `vport_loopback_packets`
+     - Unicast, multicast and broadcast packets that were loop-back (received
+       and transmitted), IB/Eth  [#accel]_.
+     - Acceleration
+
+   * - `vport_loopback_bytes`
+     - Unicast, multicast and broadcast bytes that were loop-back (received
+       and transmitted), IB/Eth  [#accel]_.
+     - Acceleration
+
    * - `rx_steer_missed_packets`
      - Number of packets that was received by the NIC, however was discarded
        because it did not match any flow in the NIC flow table.
diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst
index 3354ca3608ee6..a4edf908b707c 100644
--- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst
+++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst
@@ -290,6 +290,13 @@ Description of the vnic counters:
 - nic_receive_steering_discard
         number of packets that completed RX flow
         steering but were discarded due to a mismatch in flow table.
+- generated_pkt_steering_fail
+	number of packets generated by the VNIC experiencing unexpected steering
+	failure (at any point in steering flow).
+- handled_pkt_steering_fail
+	number of packets handled by the VNIC experiencing unexpected steering
+	failure (at any point in steering flow owned by the VNIC, including the FDB
+	for the eswitch owner).
 
 User commands examples:
 
diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst
index 01deedb715975..6e3f5ee8b0d01 100644
--- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst
+++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst
@@ -45,6 +45,28 @@ Following bridge VLAN functions are supported by mlx5:
 Subfunction
 ===========
 
+Subfunction which are spawned over the E-switch are created only with devlink
+device, and by default all the SF auxiliary devices are disabled.
+This will allow user to configure the SF before the SF have been fully probed,
+which will save time.
+
+Usage example:
+
+- Create SF::
+
+    $ devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 11
+    $ devlink port function set pci/0000:08:00.0/32768 hw_addr 00:00:00:00:00:11 state active
+
+- Enable ETH auxiliary device::
+
+    $ devlink dev param set auxiliary/mlx5_core.sf.1 name enable_eth value true cmode driverinit
+
+- Now, in order to fully probe the SF, use devlink reload::
+
+    $ devlink dev reload auxiliary/mlx5_core.sf.1
+
+mlx5 supports ETH,rdma and vdpa (vnet) auxiliary devices devlink params (see :ref:`Documentation/networking/devlink/devlink-params.rst <devlink_params_generic>`).
+
 mlx5 supports subfunction management using devlink port (see :ref:`Documentation/networking/devlink/devlink-port.rst <devlink_port>`) interface.
 
 A subfunction has its own function capabilities and its own resources. This
diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
index 80b8f73a0244f..4a010a7cde7f8 100644
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@@ -881,9 +881,10 @@ tcp_fastopen_key - list of comma separated 32-digit hexadecimal INTEGERs
 tcp_syn_retries - INTEGER
 	Number of times initial SYNs for an active TCP connection attempt
 	will be retransmitted. Should not be higher than 127. Default value
-	is 6, which corresponds to 63seconds till the last retransmission
-	with the current initial RTO of 1second. With this the final timeout
-	for an active TCP connection attempt will happen after 127seconds.
+	is 6, which corresponds to 67seconds (with tcp_syn_linear_timeouts = 4)
+	till the last retransmission with the current initial RTO of 1second.
+	With this the final timeout for an active TCP connection attempt
+	will happen after 131seconds.
 
 tcp_timestamps - INTEGER
 	Enable timestamps as defined in RFC1323.
@@ -946,6 +947,16 @@ tcp_pacing_ca_ratio - INTEGER
 
 	Default: 120
 
+tcp_syn_linear_timeouts - INTEGER
+	The number of times for an active TCP connection to retransmit SYNs with
+	a linear backoff timeout before defaulting to an exponential backoff
+	timeout. This has no effect on SYNACK at the passive TCP side.
+
+	With an initial RTO of 1 and tcp_syn_linear_timeouts = 4 we would
+	expect SYN RTOs to be: 1, 1, 1, 1, 1, 2, 4, ... (4 linear timeouts,
+	and the first exponential backoff using 2^0 * initial_RTO).
+	Default: 4
+
 tcp_tso_win_divisor - INTEGER
 	This allows control over what percentage of the congestion window
 	can be consumed by a single TSO frame.
@@ -970,6 +981,21 @@ tcp_tw_reuse - INTEGER
 tcp_window_scaling - BOOLEAN
 	Enable window scaling as defined in RFC1323.
 
+tcp_shrink_window - BOOLEAN
+	This changes how the TCP receive window is calculated.
+
+	RFC 7323, section 2.4, says there are instances when a retracted
+	window can be offered, and that TCP implementations MUST ensure
+	that they handle a shrinking window, as specified in RFC 1122.
+
+	- 0 - Disabled.	The window is never shrunk.
+	- 1 - Enabled.	The window is shrunk when necessary to remain within
+			the memory limit set by autotuning (sk_rcvbuf).
+			This only occurs if a non-zero receive window
+			scaling factor is also in effect.
+
+	Default: 0
+
 tcp_wmem - vector of 3 INTEGERs: min, default, max
 	min: Amount of memory reserved for send buffers for TCP sockets.
 	Each TCP socket has rights to use it due to fact of its birth.
diff --git a/Documentation/networking/napi.rst b/Documentation/networking/napi.rst
index a7a047742e934..7bf7b95c4f7af 100644
--- a/Documentation/networking/napi.rst
+++ b/Documentation/networking/napi.rst
@@ -65,15 +65,16 @@ argument - drivers can process completions for any number of Tx
 packets but should only process up to ``budget`` number of
 Rx packets. Rx processing is usually much more expensive.
 
-In other words, it is recommended to ignore the budget argument when
-performing TX buffer reclamation to ensure that the reclamation is not
-arbitrarily bounded; however, it is required to honor the budget argument
-for RX processing.
+In other words for Rx processing the ``budget`` argument limits how many
+packets driver can process in a single poll. Rx specific APIs like page
+pool or XDP cannot be used at all when ``budget`` is 0.
+skb Tx processing should happen regardless of the ``budget``, but if
+the argument is 0 driver cannot call any XDP (or page pool) APIs.
 
 .. warning::
 
-   The ``budget`` argument may be 0 if core tries to only process Tx completions
-   and no Rx packets.
+   The ``budget`` argument may be 0 if core tries to only process
+   skb Tx completions and no Rx or XDP packets.
 
 The poll method returns the amount of work done. If the driver still
 has outstanding work to do (e.g. ``budget`` was exhausted)
diff --git a/Documentation/networking/nf_conntrack-sysctl.rst b/Documentation/networking/nf_conntrack-sysctl.rst
index 8b1045c3b59e0..c383a394c6656 100644
--- a/Documentation/networking/nf_conntrack-sysctl.rst
+++ b/Documentation/networking/nf_conntrack-sysctl.rst
@@ -178,10 +178,10 @@ nf_conntrack_sctp_timeout_established - INTEGER (seconds)
 	Default is set to (hb_interval * path_max_retrans + rto_max)
 
 nf_conntrack_sctp_timeout_shutdown_sent - INTEGER (seconds)
-	default 0.3
+	default 3
 
 nf_conntrack_sctp_timeout_shutdown_recd - INTEGER (seconds)
-	default 0.3
+	default 3
 
 nf_conntrack_sctp_timeout_shutdown_ack_sent - INTEGER (seconds)
 	default 3
diff --git a/Documentation/networking/scaling.rst b/Documentation/networking/scaling.rst
index 3d435caa3ef2b..92c9fb46d6a21 100644
--- a/Documentation/networking/scaling.rst
+++ b/Documentation/networking/scaling.rst
@@ -269,8 +269,8 @@ a single application thread handles flows with many different flow hashes.
 rps_sock_flow_table is a global flow table that contains the *desired* CPU
 for flows: the CPU that is currently processing the flow in userspace.
 Each table value is a CPU index that is updated during calls to recvmsg
-and sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage()
-and tcp_splice_read()).
+and sendmsg (specifically, inet_recvmsg(), inet_sendmsg() and
+tcp_splice_read()).
 
 When the scheduler moves a thread to a new CPU while it has outstanding
 receive packets on the old CPU, packets may arrive out of order. To
diff --git a/Documentation/powerpc/dexcr.rst b/Documentation/powerpc/dexcr.rst
new file mode 100644
index 0000000000000..615a631f51fa1
--- /dev/null
+++ b/Documentation/powerpc/dexcr.rst
@@ -0,0 +1,58 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+==========================================
+DEXCR (Dynamic Execution Control Register)
+==========================================
+
+Overview
+========
+
+The DEXCR is a privileged special purpose register (SPR) introduced in
+PowerPC ISA 3.1B (Power10) that allows per-cpu control over several dynamic
+execution behaviours. These behaviours include speculation (e.g., indirect
+branch target prediction) and enabling return-oriented programming (ROP)
+protection instructions.
+
+The execution control is exposed in hardware as up to 32 bits ('aspects') in
+the DEXCR. Each aspect controls a certain behaviour, and can be set or cleared
+to enable/disable the aspect. There are several variants of the DEXCR for
+different purposes:
+
+DEXCR
+    A privileged SPR that can control aspects for userspace and kernel space
+HDEXCR
+    A hypervisor-privileged SPR that can control aspects for the hypervisor and
+    enforce aspects for the kernel and userspace.
+UDEXCR
+    An optional ultravisor-privileged SPR that can control aspects for the ultravisor.
+
+Userspace can examine the current DEXCR state using a dedicated SPR that
+provides a non-privileged read-only view of the userspace DEXCR aspects.
+There is also an SPR that provides a read-only view of the hypervisor enforced
+aspects, which ORed with the userspace DEXCR view gives the effective DEXCR
+state for a process.
+
+
+Configuration
+=============
+
+The DEXCR is currently unconfigurable. All threads are run with the
+NPHIE aspect enabled.
+
+
+coredump and ptrace
+===================
+
+The userspace values of the DEXCR and HDEXCR (in this order) are exposed under
+``NT_PPC_DEXCR``. These are each 64 bits and readonly, and are intended to
+assist with core dumps. The DEXCR may be made writable in future. The top 32
+bits of both registers (corresponding to the non-userspace bits) are masked off.
+
+If the kernel config ``CONFIG_CHECKPOINT_RESTORE`` is enabled, then
+``NT_PPC_HASHKEYR`` is available and exposes the HASHKEYR value of the process
+for reading and writing. This is a tradeoff between increased security and
+checkpoint/restore support: a process should normally have no need to know its
+secret key, but restoring a process requires setting its original key. The key
+therefore appears in core dumps, and an attacker may be able to retrieve it from
+a coredump and effectively bypass ROP protection on any threads that share this
+key (potentially all threads from the same parent that have not run ``exec()``).
diff --git a/Documentation/powerpc/index.rst b/Documentation/powerpc/index.rst
index 85e80e30160bb..d33b554ca7ba0 100644
--- a/Documentation/powerpc/index.rst
+++ b/Documentation/powerpc/index.rst
@@ -15,6 +15,7 @@ powerpc
     cxl
     cxlflash
     dawr-power9
+    dexcr
     dscr
     eeh-pci-error-recovery
     elf_hwcaps
diff --git a/Documentation/process/2.Process.rst b/Documentation/process/2.Process.rst
index 6a919cffcbfd7..613a01da4717a 100644
--- a/Documentation/process/2.Process.rst
+++ b/Documentation/process/2.Process.rst
@@ -434,9 +434,10 @@ There are a few hints which can help with linux-kernel survival:
   questions.  Some developers can get impatient with people who clearly
   have not done their homework.
 
-- Avoid top-posting (the practice of putting your answer above the quoted
-  text you are responding to).  It makes your response harder to read and
-  makes a poor impression.
+- Use interleaved ("inline") replies, which makes your response easier to
+  read. (i.e. avoid top-posting -- the practice of putting your answer above
+  the quoted text you are responding to.) For more details, see
+  :ref:`Documentation/process/submitting-patches.rst <interleaved_replies>`.
 
 - Ask on the correct mailing list.  Linux-kernel may be the general meeting
   point, but it is not the best place to find developers from all
diff --git a/Documentation/process/6.Followthrough.rst b/Documentation/process/6.Followthrough.rst
index a173cd5f93d28..66fa400c6d940 100644
--- a/Documentation/process/6.Followthrough.rst
+++ b/Documentation/process/6.Followthrough.rst
@@ -51,6 +51,13 @@ mind:
    working toward the creation of the best kernel they can; they are not
    trying to create discomfort for their employers' competitors.
 
+ - Be prepared for seemingly silly requests for coding style changes
+   and requests to factor out some of your code to shared parts of
+   the kernel. One job the maintainers do is to keep things looking
+   the same. Sometimes this means that the clever hack in your driver
+   to get around a problem actually needs to become a generalized
+   kernel feature ready for next time.
+
 What all of this comes down to is that, when reviewers send you comments,
 you need to pay attention to the technical observations that they are
 making.  Do not let their form of expression or your own pride keep that
diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst
index ef540865ad22e..5561dae94f857 100644
--- a/Documentation/process/changes.rst
+++ b/Documentation/process/changes.rst
@@ -31,7 +31,7 @@ you probably needn't concern yourself with pcmciautils.
 ====================== ===============  ========================================
 GNU C                  5.1              gcc --version
 Clang/LLVM (optional)  11.0.0           clang --version
-Rust (optional)        1.62.0           rustc --version
+Rust (optional)        1.68.2           rustc --version
 bindgen (optional)     0.56.0           bindgen --version
 GNU make               3.82             make --version
 bash                   4.2              bash --version
@@ -60,6 +60,8 @@ openssl & libcrypto    1.0.0            openssl version
 bc                     1.06.95          bc --version
 Sphinx\ [#f1]_         1.7              sphinx-build --version
 cpio                   any              cpio --version
+GNU tar                1.28             tar --version
+gtags (optional)       6.6.5            gtags --version
 ====================== ===============  ========================================
 
 .. [#f1] Sphinx is needed only to build the Kernel documentation
@@ -174,6 +176,18 @@ You will need openssl to build kernels 3.7 and higher if module signing is
 enabled.  You will also need openssl development packages to build kernels 4.3
 and higher.
 
+Tar
+---
+
+GNU tar is needed if you want to enable access to the kernel headers via sysfs
+(CONFIG_IKHEADERS).
+
+gtags / GNU GLOBAL (optional)
+-----------------------------
+
+The kernel build requires GNU GLOBAL version 6.6.5 or later to generate
+tag files through ``make gtags``.  This is due to its use of the gtags
+``-C (--directory)`` flag.
 
 System utilities
 ****************
diff --git a/Documentation/process/embargoed-hardware-issues.rst b/Documentation/process/embargoed-hardware-issues.rst
index df978127f2d78..cb686238f21d1 100644
--- a/Documentation/process/embargoed-hardware-issues.rst
+++ b/Documentation/process/embargoed-hardware-issues.rst
@@ -254,7 +254,6 @@ an involved disclosed party. The current ambassadors list:
   Samsung	Javier González <javier.gonz@samsung.com>
 
   Microsoft	James Morris <jamorris@linux.microsoft.com>
-  VMware
   Xen		Andrew Cooper <andrew.cooper3@citrix.com>
 
   Canonical	John Johansen <john.johansen@canonical.com>
@@ -263,10 +262,8 @@ an involved disclosed party. The current ambassadors list:
   Red Hat	Josh Poimboeuf <jpoimboe@redhat.com>
   SUSE		Jiri Kosina <jkosina@suse.cz>
 
-  Amazon
   Google	Kees Cook <keescook@chromium.org>
 
-  GCC
   LLVM		Nick Desaulniers <ndesaulniers@google.com>
   ============= ========================================================
 
diff --git a/Documentation/process/handling-regressions.rst b/Documentation/process/handling-regressions.rst
index abb741b1aeee7..5d3c3de3f4ecb 100644
--- a/Documentation/process/handling-regressions.rst
+++ b/Documentation/process/handling-regressions.rst
@@ -129,88 +129,132 @@ tools and scripts used by other kernel developers or Linux distributions; one of
 these tools is regzbot, which heavily relies on the "Link:" tags to associate
 reports for regression with changes resolving them.
 
-Prioritize work on fixing regressions
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-You should fix any reported regression as quickly as possible, to provide
-affected users with a solution in a timely manner and prevent more users from
-running into the issue; nevertheless developers need to take enough time and
-care to ensure regression fixes do not cause additional damage.
-
-In the end though, developers should give their best to prevent users from
-running into situations where a regression leaves them only three options: "run
-a kernel with a regression that seriously impacts usage", "continue running an
-outdated and thus potentially insecure kernel version for more than two weeks
-after a regression's culprit was identified", and "downgrade to a still
-supported kernel series that lack required features".
-
-How to realize this depends a lot on the situation. Here are a few rules of
-thumb for you, in order or importance:
-
- * Prioritize work on handling regression reports and fixing regression over all
-   other Linux kernel work, unless the latter concerns acute security issues or
-   bugs causing data loss or damage.
-
- * Always consider reverting the culprit commits and reapplying them later
-   together with necessary fixes, as this might be the least dangerous and
-   quickest way to fix a regression.
-
- * Developers should handle regressions in all supported kernel series, but are
-   free to delegate the work to the stable team, if the issue probably at no
-   point in time occurred with mainline.
-
- * Try to resolve any regressions introduced in the current development before
-   its end. If you fear a fix might be too risky to apply only days before a new
-   mainline release, let Linus decide: submit the fix separately to him as soon
-   as possible with the explanation of the situation. He then can make a call
-   and postpone the release if necessary, for example if multiple such changes
-   show up in his inbox.
-
- * Address regressions in stable, longterm, or proper mainline releases with
-   more urgency than regressions in mainline pre-releases. That changes after
-   the release of the fifth pre-release, aka "-rc5": mainline then becomes as
-   important, to ensure all the improvements and fixes are ideally tested
-   together for at least one week before Linus releases a new mainline version.
-
- * Fix regressions within two or three days, if they are critical for some
-   reason -- for example, if the issue is likely to affect many users of the
-   kernel series in question on all or certain architectures. Note, this
-   includes mainline, as issues like compile errors otherwise might prevent many
-   testers or continuous integration systems from testing the series.
-
- * Aim to fix regressions within one week after the culprit was identified, if
-   the issue was introduced in either:
-
-    * a recent stable/longterm release
-
-    * the development cycle of the latest proper mainline release
-
-   In the latter case (say Linux v5.14), try to address regressions even
-   quicker, if the stable series for the predecessor (v5.13) will be abandoned
-   soon or already was stamped "End-of-Life" (EOL) -- this usually happens about
-   three to four weeks after a new mainline release.
-
- * Try to fix all other regressions within two weeks after the culprit was
-   found. Two or three additional weeks are acceptable for performance
-   regressions and other issues which are annoying, but don't prevent anyone
-   from running Linux (unless it's an issue in the current development cycle,
-   as those should ideally be addressed before the release). A few weeks in
-   total are acceptable if a regression can only be fixed with a risky change
-   and at the same time is affecting only a few users; as much time is
-   also okay if the regression is already present in the second newest longterm
-   kernel series.
-
-Note: The aforementioned time frames for resolving regressions are meant to
-include getting the fix tested, reviewed, and merged into mainline, ideally with
-the fix being in linux-next at least briefly. This leads to delays you need to
-account for.
-
-Subsystem maintainers are expected to assist in reaching those periods by doing
-timely reviews and quick handling of accepted patches. They thus might have to
-send git-pull requests earlier or more often than usual; depending on the fix,
-it might even be acceptable to skip testing in linux-next. Especially fixes for
-regressions in stable and longterm kernels need to be handled quickly, as fixes
-need to be merged in mainline before they can be backported to older series.
+Expectations and best practices for fixing regressions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+As a Linux kernel developer, you are expected to give your best to prevent
+situations where a regression caused by a recent change of yours leaves users
+only these options:
+
+ * Run a kernel with a regression that impacts usage.
+
+ * Switch to an older or newer kernel series.
+
+ * Continue running an outdated and thus potentially insecure kernel for more
+   than three weeks after the regression's culprit was identified. Ideally it
+   should be less than two. And it ought to be just a few days, if the issue is
+   severe or affects many users -- either in general or in prevalent
+   environments.
+
+How to realize that in practice depends on various factors. Use the following
+rules of thumb as a guide.
+
+In general:
+
+ * Prioritize work on regressions over all other Linux kernel work, unless the
+   latter concerns a severe issue (e.g. acute security vulnerability, data loss,
+   bricked hardware, ...).
+
+ * Expedite fixing mainline regressions that recently made it into a proper
+   mainline, stable, or longterm release (either directly or via backport).
+
+ * Do not consider regressions from the current cycle as something that can wait
+   till the end of the cycle, as the issue might discourage or prevent users and
+   CI systems from testing mainline now or generally.
+
+ * Work with the required care to avoid additional or bigger damage, even if
+   resolving an issue then might take longer than outlined below.
+
+On timing once the culprit of a regression is known:
+
+ * Aim to mainline a fix within two or three days, if the issue is severe or
+   bothering many users -- either in general or in prevalent conditions like a
+   particular hardware environment, distribution, or stable/longterm series.
+
+ * Aim to mainline a fix by Sunday after the next, if the culprit made it
+   into a recent mainline, stable, or longterm release (either directly or via
+   backport); if the culprit became known early during a week and is simple to
+   resolve, try to mainline the fix within the same week.
+
+ * For other regressions, aim to mainline fixes before the hindmost Sunday
+   within the next three weeks. One or two Sundays later are acceptable, if the
+   regression is something people can live with easily for a while -- like a
+   mild performance regression.
+
+ * It's strongly discouraged to delay mainlining regression fixes till the next
+   merge window, except when the fix is extraordinarily risky or when the
+   culprit was mainlined more than a year ago.
+
+On procedure:
+
+ * Always consider reverting the culprit, as it's often the quickest and least
+   dangerous way to fix a regression. Don't worry about mainlining a fixed
+   variant later: that should be straight-forward, as most of the code went
+   through review once already.
+
+ * Try to resolve any regressions introduced in mainline during the past
+   twelve months before the current development cycle ends: Linus wants such
+   regressions to be handled like those from the current cycle, unless fixing
+   bears unusual risks.
+
+ * Consider CCing Linus on discussions or patch review, if a regression seems
+   tangly. Do the same in precarious or urgent cases -- especially if the
+   subsystem maintainer might be unavailable. Also CC the stable team, when you
+   know such a regression made it into a mainline, stable, or longterm release.
+
+ * For urgent regressions, consider asking Linus to pick up the fix straight
+   from the mailing list: he is totally fine with that for uncontroversial
+   fixes. Ideally though such requests should happen in accordance with the
+   subsystem maintainers or come directly from them.
+
+ * In case you are unsure if a fix is worth the risk applying just days before
+   a new mainline release, send Linus a mail with the usual lists and people in
+   CC; in it, summarize the situation while asking him to consider picking up
+   the fix straight from the list. He then himself can make the call and when
+   needed even postpone the release. Such requests again should ideally happen
+   in accordance with the subsystem maintainers or come directly from them.
+
+Regarding stable and longterm kernels:
+
+ * You are free to leave regressions to the stable team, if they at no point in
+   time occurred with mainline or were fixed there already.
+
+ * If a regression made it into a proper mainline release during the past
+   twelve months, ensure to tag the fix with "Cc: stable@vger.kernel.org", as a
+   "Fixes:" tag alone does not guarantee a backport. Please add the same tag,
+   in case you know the culprit was backported to stable or longterm kernels.
+
+ * When receiving reports about regressions in recent stable or longterm kernel
+   series, please evaluate at least briefly if the issue might happen in current
+   mainline as well -- and if that seems likely, take hold of the report. If in
+   doubt, ask the reporter to check mainline.
+
+ * Whenever you want to swiftly resolve a regression that recently also made it
+   into a proper mainline, stable, or longterm release, fix it quickly in
+   mainline; when appropriate thus involve Linus to fast-track the fix (see
+   above). That's because the stable team normally does neither revert nor fix
+   any changes that cause the same problems in mainline.
+
+ * In case of urgent regression fixes you might want to ensure prompt
+   backporting by dropping the stable team a note once the fix was mainlined;
+   this is especially advisable during merge windows and shortly thereafter, as
+   the fix otherwise might land at the end of a huge patch queue.
+
+On patch flow:
+
+ * Developers, when trying to reach the time periods mentioned above, remember
+   to account for the time it takes to get fixes tested, reviewed, and merged by
+   Linus, ideally with them being in linux-next at least briefly. Hence, if a
+   fix is urgent, make it obvious to ensure others handle it appropriately.
+
+ * Reviewers, you are kindly asked to assist developers in reaching the time
+   periods mentioned above by reviewing regression fixes in a timely manner.
+
+ * Subsystem maintainers, you likewise are encouraged to expedite the handling
+   of regression fixes. Thus evaluate if skipping linux-next is an option for
+   the particular fix. Also consider sending git pull requests more often than
+   usual when needed. And try to avoid holding onto regression fixes over
+   weekends -- especially when the fix is marked for backporting.
 
 
 More aspects regarding regressions developers should be aware of
diff --git a/Documentation/process/maintainer-handbooks.rst b/Documentation/process/maintainer-handbooks.rst
index d783060b4cc6e..9992bfd7eaa37 100644
--- a/Documentation/process/maintainer-handbooks.rst
+++ b/Documentation/process/maintainer-handbooks.rst
@@ -15,5 +15,7 @@ Contents:
    :numbered:
    :maxdepth: 2
 
-   maintainer-tip
    maintainer-netdev
+   maintainer-soc
+   maintainer-tip
+   maintainer-kvm-x86
diff --git a/Documentation/process/maintainer-kvm-x86.rst b/Documentation/process/maintainer-kvm-x86.rst
new file mode 100644
index 0000000000000..9183bd4497626
--- /dev/null
+++ b/Documentation/process/maintainer-kvm-x86.rst
@@ -0,0 +1,390 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+KVM x86
+=======
+
+Foreword
+--------
+KVM strives to be a welcoming community; contributions from newcomers are
+valued and encouraged.  Please do not be discouraged or intimidated by the
+length of this document and the many rules/guidelines it contains.  Everyone
+makes mistakes, and everyone was a newbie at some point.  So long as you make
+an honest effort to follow KVM x86's guidelines, are receptive to feedback,
+and learn from any mistakes you make, you will be welcomed with open arms, not
+torches and pitchforks.
+
+TL;DR
+-----
+Testing is mandatory.  Be consistent with established styles and patterns.
+
+Trees
+-----
+KVM x86 is currently in a transition period from being part of the main KVM
+tree, to being "just another KVM arch".  As such, KVM x86 is split across the
+main KVM tree, ``git.kernel.org/pub/scm/virt/kvm/kvm.git``, and a KVM x86
+specific tree, ``github.com/kvm-x86/linux.git``.
+
+Generally speaking, fixes for the current cycle are applied directly to the
+main KVM tree, while all development for the next cycle is routed through the
+KVM x86 tree.  In the unlikely event that a fix for the current cycle is routed
+through the KVM x86 tree, it will be applied to the ``fixes`` branch before
+making its way to the main KVM tree.
+
+Note, this transition period is expected to last quite some time, i.e. will be
+the status quo for the foreseeable future.
+
+Branches
+~~~~~~~~
+The KVM x86 tree is organized into multiple topic branches.  The purpose of
+using finer-grained topic branches is to make it easier to keep tabs on an area
+of development, and to limit the collateral damage of human errors and/or buggy
+commits, e.g. dropping the HEAD commit of a topic branch has no impact on other
+in-flight commits' SHA1 hashes, and having to reject a pull request due to bugs
+delays only that topic branch.
+
+All topic branches, except for ``next`` and ``fixes``, are rolled into ``next``
+via a Cthulhu merge on an as-needed basis, i.e. when a topic branch is updated.
+As a result, force pushes to ``next`` are common.
+
+Lifecycle
+~~~~~~~~~
+Fixes that target the current release, a.k.a. mainline, are typically applied
+directly to the main KVM tree, i.e. do not route through the KVM x86 tree.
+
+Changes that target the next release are routed through the KVM x86 tree.  Pull
+requests (from KVM x86 to main KVM) are sent for each KVM x86 topic branch,
+typically the week before Linus' opening of the merge window, e.g. the week
+following rc7 for "normal" releases.  If all goes well, the topic branches are
+rolled into the main KVM pull request sent during Linus' merge window.
+
+The KVM x86 tree doesn't have its own official merge window, but there's a soft
+close around rc5 for new features, and a soft close around rc6 for fixes (for
+the next release; see above for fixes that target the current release).
+
+Timeline
+~~~~~~~~
+Submissions are typically reviewed and applied in FIFO order, with some wiggle
+room for the size of a series, patches that are "cache hot", etc.  Fixes,
+especially for the current release and or stable trees, get to jump the queue.
+Patches that will be taken through a non-KVM tree (most often through the tip
+tree) and/or have other acks/reviews also jump the queue to some extent.
+
+Note, the vast majority of review is done between rc1 and rc6, give or take.
+The period between rc6 and the next rc1 is used to catch up on other tasks,
+i.e. radio silence during this period isn't unusual.
+
+Pings to get a status update are welcome, but keep in mind the timing of the
+current release cycle and have realistic expectations.  If you are pinging for
+acceptance, i.e. not just for feedback or an update, please do everything you
+can, within reason, to ensure that your patches are ready to be merged!  Pings
+on series that break the build or fail tests lead to unhappy maintainers!
+
+Development
+-----------
+
+Base Tree/Branch
+~~~~~~~~~~~~~~~~
+Fixes that target the current release, a.k.a. mainline, should be based on
+``git://git.kernel.org/pub/scm/virt/kvm/kvm.git master``.  Note, fixes do not
+automatically warrant inclusion in the current release.  There is no singular
+rule, but typically only fixes for bugs that are urgent, critical, and/or were
+introduced in the current release should target the current release.
+
+Everything else should be based on ``kvm-x86/next``, i.e. there is no need to
+select a specific topic branch as the base.  If there are conflicts and/or
+dependencies across topic branches, it is the maintainer's job to sort them
+out.
+
+The only exception to using ``kvm-x86/next`` as the base is if a patch/series
+is a multi-arch series, i.e. has non-trivial modifications to common KVM code
+and/or has more than superficial changes to other architectures' code.  Multi-
+arch patch/series should instead be based on a common, stable point in KVM's
+history, e.g. the release candidate upon which ``kvm-x86 next`` is based.  If
+you're unsure whether a patch/series is truly multi-arch, err on the side of
+caution and treat it as multi-arch, i.e. use a common base.
+
+Coding Style
+~~~~~~~~~~~~
+When it comes to style, naming, patterns, etc., consistency is the number one
+priority in KVM x86.  If all else fails, match what already exists.
+
+With a few caveats listed below, follow the tip tree maintainers' preferred
+:ref:`maintainer-tip-coding-style`, as patches/series often touch both KVM and
+non-KVM x86 files, i.e. draw the attention of KVM *and* tip tree maintainers.
+
+Using reverse fir tree, a.k.a. reverse Christmas tree or reverse XMAS tree, for
+variable declarations isn't strictly required, though it is still preferred.
+
+Except for a handful of special snowflakes, do not use kernel-doc comments for
+functions.  The vast majority of "public" KVM functions aren't truly public as
+they are intended only for KVM-internal consumption (there are plans to
+privatize KVM's headers and exports to enforce this).
+
+Comments
+~~~~~~~~
+Write comments using imperative mood and avoid pronouns.  Use comments to
+provide a high level overview of the code, and/or to explain why the code does
+what it does.  Do not reiterate what the code literally does; let the code
+speak for itself.  If the code itself is inscrutable, comments will not help.
+
+SDM and APM References
+~~~~~~~~~~~~~~~~~~~~~~
+Much of KVM's code base is directly tied to architectural behavior defined in
+Intel's Software Development Manual (SDM) and AMD's Architecture Programmer’s
+Manual (APM).  Use of "Intel's SDM" and "AMD's APM", or even just "SDM" or
+"APM", without additional context is a-ok.
+
+Do not reference specific sections, tables, figures, etc. by number, especially
+not in comments.  Instead, if necessary (see below), copy-paste the relevant
+snippet and reference sections/tables/figures by name.  The layouts of the SDM
+and APM are constantly changing, and so the numbers/labels aren't stable.
+
+Generally speaking, do not explicitly reference or copy-paste from the SDM or
+APM in comments.  With few exceptions, KVM *must* honor architectural behavior,
+therefore it's implied that KVM behavior is emulating SDM and/or APM behavior.
+Note, referencing the SDM/APM in changelogs to justify the change and provide
+context is perfectly ok and encouraged.
+
+Shortlog
+~~~~~~~~
+The preferred prefix format is ``KVM: <topic>:``, where ``<topic>`` is one of::
+
+  - x86
+  - x86/mmu
+  - x86/pmu
+  - x86/xen
+  - selftests
+  - SVM
+  - nSVM
+  - VMX
+  - nVMX
+
+**DO NOT use x86/kvm!**  ``x86/kvm`` is used exclusively for Linux-as-a-KVM-guest
+changes, i.e. for arch/x86/kernel/kvm.c.  Do not use file names or complete file
+paths as the subject/shortlog prefix.
+
+Note, these don't align with the topics branches (the topic branches care much
+more about code conflicts).
+
+All names are case sensitive!  ``KVM: x86:`` is good, ``kvm: vmx:`` is not.
+
+Capitalize the first word of the condensed patch description, but omit ending
+punctionation.  E.g.::
+
+    KVM: x86: Fix a null pointer dereference in function_xyz()
+
+not::
+
+    kvm: x86: fix a null pointer dereference in function_xyz.
+
+If a patch touches multiple topics, traverse up the conceptual tree to find the
+first common parent (which is often simply ``x86``).  When in doubt,
+``git log path/to/file`` should provide a reasonable hint.
+
+New topics do occasionally pop up, but please start an on-list discussion if
+you want to propose introducing a new topic, i.e. don't go rogue.
+
+See :ref:`the_canonical_patch_format` for more information, with one amendment:
+do not treat the 70-75 character limit as an absolute, hard limit.  Instead,
+use 75 characters as a firm-but-not-hard limit, and use 80 characters as a hard
+limit.  I.e. let the shortlog run a few characters over the standard limit if
+you have good reason to do so.
+
+Changelog
+~~~~~~~~~
+Most importantly, write changelogs using imperative mood and avoid pronouns.
+
+See :ref:`describe_changes` for more information, with one amendment: lead with
+a short blurb on the actual changes, and then follow up with the context and
+background.  Note!  This order directly conflicts with the tip tree's preferred
+approach!  Please follow the tip tree's preferred style when sending patches
+that primarily target arch/x86 code that is _NOT_ KVM code.
+
+Stating what a patch does before diving into details is preferred by KVM x86
+for several reasons.  First and foremost, what code is actually being changed
+is arguably the most important information, and so that info should be easy to
+find. Changelogs that bury the "what's actually changing" in a one-liner after
+3+ paragraphs of background make it very hard to find that information.
+
+For initial review, one could argue the "what's broken" is more important, but
+for skimming logs and git archaeology, the gory details matter less and less.
+E.g. when doing a series of "git blame", the details of each change along the
+way are useless, the details only matter for the culprit.  Providing the "what
+changed" makes it easy to quickly determine whether or not a commit might be of
+interest.
+
+Another benefit of stating "what's changing" first is that it's almost always
+possible to state "what's changing" in a single sentence.  Conversely, all but
+the most simple bugs require multiple sentences or paragraphs to fully describe
+the problem.  If both the "what's changing" and "what's the bug" are super
+short then the order doesn't matter.  But if one is shorter (almost always the
+"what's changing), then covering the shorter one first is advantageous because
+it's less of an inconvenience for readers/reviewers that have a strict ordering
+preference.  E.g. having to skip one sentence to get to the context is less
+painful than having to skip three paragraphs to get to "what's changing".
+
+Fixes
+~~~~~
+If a change fixes a KVM/kernel bug, add a Fixes: tag even if the change doesn't
+need to be backported to stable kernels, and even if the change fixes a bug in
+an older release.
+
+Conversely, if a fix does need to be backported, explicitly tag the patch with
+"Cc: stable@vger.kernel" (though the email itself doesn't need to Cc: stable);
+KVM x86 opts out of backporting Fixes: by default.  Some auto-selected patches
+do get backported, but require explicit maintainer approval (search MANUALSEL).
+
+Function References
+~~~~~~~~~~~~~~~~~~~
+When a function is mentioned in a comment, changelog, or shortlog (or anywhere
+for that matter), use the format ``function_name()``.  The parentheses provide
+context and disambiguate the reference.
+
+Testing
+-------
+At a bare minimum, *all* patches in a series must build cleanly for KVM_INTEL=m
+KVM_AMD=m, and KVM_WERROR=y.  Building every possible combination of Kconfigs
+isn't feasible, but the more the merrier.  KVM_SMM, KVM_XEN, PROVE_LOCKING, and
+X86_64 are particularly interesting knobs to turn.
+
+Running KVM selftests and KVM-unit-tests is also mandatory (and stating the
+obvious, the tests need to pass).  The only exception is for changes that have
+negligible probability of affecting runtime behavior, e.g. patches that only
+modify comments.  When possible and relevant, testing on both Intel and AMD is
+strongly preferred.  Booting an actual VM is encouraged, but not mandatory.
+
+For changes that touch KVM's shadow paging code, running with TDP (EPT/NPT)
+disabled is mandatory.  For changes that affect common KVM MMU code, running
+with TDP disabled is strongly encouraged.  For all other changes, if the code
+being modified depends on and/or interacts with a module param, testing with
+the relevant settings is mandatory.
+
+Note, KVM selftests and KVM-unit-tests do have known failures.  If you suspect
+a failure is not due to your changes, verify that the *exact same* failure
+occurs with and without your changes.
+
+Changes that touch reStructured Text documentation, i.e. .rst files, must build
+htmldocs cleanly, i.e. with no new warnings or errors.
+
+If you can't fully test a change, e.g. due to lack of hardware, clearly state
+what level of testing you were able to do, e.g. in the cover letter.
+
+New Features
+~~~~~~~~~~~~
+With one exception, new features *must* come with test coverage.  KVM specific
+tests aren't strictly required, e.g. if coverage is provided by running a
+sufficiently enabled guest VM, or by running a related kernel selftest in a VM,
+but dedicated KVM tests are preferred in all cases.  Negative testcases in
+particular are mandatory for enabling of new hardware features as error and
+exception flows are rarely exercised simply by running a VM.
+
+The only exception to this rule is if KVM is simply advertising support for a
+feature via KVM_GET_SUPPORTED_CPUID, i.e. for instructions/features that KVM
+can't prevent a guest from using and for which there is no true enabling.
+
+Note, "new features" does not just mean "new hardware features"!  New features
+that can't be well validated using existing KVM selftests and/or KVM-unit-tests
+must come with tests.
+
+Posting new feature development without tests to get early feedback is more
+than welcome, but such submissions should be tagged RFC, and the cover letter
+should clearly state what type of feedback is requested/expected.  Do not abuse
+the RFC process; RFCs will typically not receive in-depth review.
+
+Bug Fixes
+~~~~~~~~~
+Except for "obvious" found-by-inspection bugs, fixes must be accompanied by a
+reproducer for the bug being fixed.  In many cases the reproducer is implicit,
+e.g. for build errors and test failures, but it should still be clear to
+readers what is broken and how to verify the fix.  Some leeway is given for
+bugs that are found via non-public workloads/tests, but providing regression
+tests for such bugs is strongly preferred.
+
+In general, regression tests are preferred for any bug that is not trivial to
+hit.  E.g. even if the bug was originally found by a fuzzer such as syzkaller,
+a targeted regression test may be warranted if the bug requires hitting a
+one-in-a-million type race condition.
+
+Note, KVM bugs are rarely urgent *and* non-trivial to reproduce.  Ask yourself
+if a bug is really truly the end of the world before posting a fix without a
+reproducer.
+
+Posting
+-------
+
+Links
+~~~~~
+Do not explicitly reference bug reports, prior versions of a patch/series, etc.
+via ``In-Reply-To:`` headers.  Using ``In-Reply-To:`` becomes an unholy mess
+for large series and/or when the version count gets high, and ``In-Reply-To:``
+is useless for anyone that doesn't have the original message, e.g. if someone
+wasn't Cc'd on the bug report or if the list of recipients changes between
+versions.
+
+To link to a bug report, previous version, or anything of interest, use lore
+links.  For referencing previous version(s), generally speaking do not include
+a Link: in the changelog as there is no need to record the history in git, i.e.
+put the link in the cover letter or in the section git ignores.  Do provide a
+formal Link: for bug reports and/or discussions that led to the patch.  The
+context of why a change was made is highly valuable for future readers.
+
+Git Base
+~~~~~~~~
+If you are using git version 2.9.0 or later (Googlers, this is all of you!),
+use ``git format-patch`` with the ``--base`` flag to automatically include the
+base tree information in the generated patches.
+
+Note, ``--base=auto`` works as expected if and only if a branch's upstream is
+set to the base topic branch, e.g. it will do the wrong thing if your upstream
+is set to your personal repository for backup purposes.  An alternative "auto"
+solution is to derive the names of your development branches based on their
+KVM x86 topic, and feed that into ``--base``.  E.g. ``x86/pmu/my_branch_name``,
+and then write a small wrapper to extract ``pmu`` from the current branch name
+to yield ``--base=x/pmu``, where ``x`` is whatever name your repository uses to
+track the KVM x86 remote.
+
+Co-Posting Tests
+~~~~~~~~~~~~~~~~
+KVM selftests that are associated with KVM changes, e.g. regression tests for
+bug fixes, should be posted along with the KVM changes as a single series.  The
+standard kernel rules for bisection apply, i.e. KVM changes that result in test
+failures should be ordered after the selftests updates, and vice versa, new
+tests that fail due to KVM bugs should be ordered after the KVM fixes.
+
+KVM-unit-tests should *always* be posted separately.  Tools, e.g. b4 am, don't
+know that KVM-unit-tests is a separate repository and get confused when patches
+in a series apply on different trees.  To tie KVM-unit-tests patches back to
+KVM patches, first post the KVM changes and then provide a lore Link: to the
+KVM patch/series in the KVM-unit-tests patch(es).
+
+Notifications
+-------------
+When a patch/series is officially accepted, a notification email will be sent
+in reply to the original posting (cover letter for multi-patch series).  The
+notification will include the tree and topic branch, along with the SHA1s of
+the commits of applied patches.
+
+If a subset of patches is applied, this will be clearly stated in the
+notification.  Unless stated otherwise, it's implied that any patches in the
+series that were not accepted need more work and should be submitted in a new
+version.
+
+If for some reason a patch is dropped after officially being accepted, a reply
+will be sent to the notification email explaining why the patch was dropped, as
+well as the next steps.
+
+SHA1 Stability
+~~~~~~~~~~~~~~
+SHA1s are not 100% guaranteed to be stable until they land in Linus' tree!  A
+SHA1 is *usually* stable once a notification has been sent, but things happen.
+In most cases, an update to the notification email be provided if an applied
+patch's SHA1 changes.  However, in some scenarios, e.g. if all KVM x86 branches
+need to be rebased, individual notifications will not be given.
+
+Vulnerabilities
+---------------
+Bugs that can be exploited by the guest to attack the host (kernel or
+userspace), or that can be exploited by a nested VM to *its* host (L2 attacking
+L1), are of particular interest to KVM.  Please follow the protocol for
+:ref:`securitybugs` if you suspect a bug can lead to an escape, data leak, etc.
+
diff --git a/Documentation/process/maintainer-netdev.rst b/Documentation/process/maintainer-netdev.rst
index 83614cec9328b..2ab843cde830c 100644
--- a/Documentation/process/maintainer-netdev.rst
+++ b/Documentation/process/maintainer-netdev.rst
@@ -98,7 +98,7 @@ If you aren't subscribed to netdev and/or are simply unsure if
 repository link above for any new networking-related commits.  You may
 also check the following website for the current status:
 
-  http://vger.kernel.org/~davem/net-next.html
+  https://patchwork.hopto.org/net-next.html
 
 The ``net`` tree continues to collect fixes for the vX.Y content, and is
 fed back to Linus at regular (~weekly) intervals.  Meaning that the
@@ -149,8 +149,11 @@ themselves. No email should ever be sent to the list with the main purpose
 of communicating with the bot, the bot commands should be seen as metadata.
 
 The use of the bot is restricted to authors of the patches (the ``From:``
-header on patch submission and command must match!), maintainers themselves
-and a handful of senior reviewers. Bot records its activity here:
+header on patch submission and command must match!), maintainers of
+the modified code according to the MAINTAINERS file (again, ``From:``
+must match the MAINTAINERS entry) and a handful of senior reviewers.
+
+Bot records its activity here:
 
   https://patchwork.hopto.org/pw-bot.html
 
diff --git a/Documentation/process/maintainer-soc.rst b/Documentation/process/maintainer-soc.rst
new file mode 100644
index 0000000000000..49f08289d62c1
--- /dev/null
+++ b/Documentation/process/maintainer-soc.rst
@@ -0,0 +1,177 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+SoC Subsystem
+=============
+
+Overview
+--------
+
+The SoC subsystem is a place of aggregation for SoC-specific code.
+The main components of the subsystem are:
+
+* devicetrees for 32- & 64-bit ARM and RISC-V
+* 32-bit ARM board files (arch/arm/mach*)
+* 32- & 64-bit ARM defconfigs
+* SoC-specific drivers across architectures, in particular for 32- & 64-bit
+  ARM, RISC-V and Loongarch
+
+These "SoC-specific drivers" do not include clock, GPIO etc drivers that have
+other top-level maintainers. The drivers/soc/ directory is generally meant
+for kernel-internal drivers that are used by other drivers to provide SoC-
+specific functionality like identifying an SoC revision or interfacing with
+power domains.
+
+The SoC subsystem also serves as an intermediate location for changes to
+drivers/bus, drivers/firmware, drivers/reset and drivers/memory.  The addition
+of new platforms, or the removal of existing ones, often go through the SoC
+tree as a dedicated branch covering multiple subsystems.
+
+The main SoC tree is housed on git.kernel.org:
+  https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git/
+
+Clearly this is quite a wide range of topics, which no one person, or even
+small group of people are capable of maintaining.  Instead, the SoC subsystem
+is comprised of many submaintainers, each taking care of individual platforms
+and driver subdirectories.
+In this regard, "platform" usually refers to a series of SoCs from a given
+vendor, for example, Nvidia's series of Tegra SoCs.  Many submaintainers operate
+on a vendor level, responsible for multiple product lines.  For several reasons,
+including acquisitions/different business units in a company, things vary
+significantly here.  The various submaintainers are documented in the
+MAINTAINERS file.
+
+Most of these submaintainers have their own trees where they stage patches,
+sending pull requests to the main SoC tree.  These trees are usually, but not
+always, listed in MAINTAINERS.  The main SoC maintainers can be reached via the
+alias soc@kernel.org if there is no platform-specific maintainer, or if they
+are unresponsive.
+
+What the SoC tree is not, however, is a location for architecture-specific code
+changes.  Each architecture has its own maintainers that are responsible for
+architectural details, CPU errata and the like.
+
+Information for (new) Submaintainers
+------------------------------------
+
+As new platforms spring up, they often bring with them new submaintainers,
+many of whom work for the silicon vendor, and may not be familiar with the
+process.
+
+Devicetree ABI Stability
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Perhaps one of the most important things to highlight is that dt-bindings
+document the ABI between the devicetree and the kernel.
+Please read Documentation/devicetree/bindings/ABI.rst.
+
+If changes are being made to a devicetree that are incompatible with old
+kernels, the devicetree patch should not be applied until the driver is, or an
+appropriate time later.  Most importantly, any incompatible changes should be
+clearly pointed out in the patch description and pull request, along with the
+expected impact on existing users, such as bootloaders or other operating
+systems.
+
+Driver Branch Dependencies
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A common problem is synchronizing changes between device drivers and devicetree
+files. Even if a change is compatible in both directions, this may require
+coordinating how the changes get merged through different maintainer trees.
+
+Usually the branch that includes a driver change will also include the
+corresponding change to the devicetree binding description, to ensure they are
+in fact compatible.  This means that the devicetree branch can end up causing
+warnings in the "make dtbs_check" step.  If a devicetree change depends on
+missing additions to a header file in include/dt-bindings/, it will fail the
+"make dtbs" step and not get merged.
+
+There are multiple ways to deal with this:
+
+* Avoid defining custom macros in include/dt-bindings/ for hardware constants
+  that can be derived from a datasheet -- binding macros in header files should
+  only be used as a last resort if there is no natural way to define a binding
+
+* Use literal values in the devicetree file in place of macros even when a
+  header is required, and change them to the named representation in a
+  following release
+
+* Defer the devicetree changes to a release after the binding and driver have
+  already been merged
+
+* Change the bindings in a shared immutable branch that is used as the base for
+  both the driver change and the devicetree changes
+
+* Add duplicate defines in the devicetree file guarded by an #ifndef section,
+  removing them in a later release
+
+Devicetree Naming Convention
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The general naming scheme for devicetree files is as follows.  The aspects of a
+platform that are set at the SoC level, like CPU cores, are contained in a file
+named $soc.dtsi, for example, jh7100.dtsi.  Integration details, that will vary
+from board to board, are described in $soc-$board.dts.  An example of this is
+jh7100-beaglev-starlight.dts.  Often many boards are variations on a theme, and
+frequently there are intermediate files, such as jh7100-common.dtsi, which sit
+between the $soc.dtsi and $soc-$board.dts files, containing the descriptions of
+common hardware.
+
+Some platforms also have System on Modules, containing an SoC, which are then
+integrated into several different boards. For these platforms, $soc-$som.dtsi
+and $soc-$som-$board.dts are typical.
+
+Directories are usually named after the vendor of the SoC at the time of its
+inclusion, leading to some historical directory names in the tree.
+
+Validating Devicetree Files
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+``make dtbs_check`` can be used to validate that devicetree files are compliant
+with the dt-bindings that describe the ABI.  Please read the section
+"Running checks" of Documentation/devicetree/bindings/writing-schema.rst for
+more information on the validation of devicetrees.
+
+For new platforms, or additions to existing ones, ``make dtbs_check`` should not
+add any new warnings.  For RISC-V, as it has the advantage of being a newer
+architecture, ``make dtbs_check W=1`` is required to not add any new warnings.
+If in any doubt about a devicetree change, reach out to the devicetree
+maintainers.
+
+Branches and Pull Requests
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Just as the main SoC tree has several branches, it is expected that
+submaintainers will do the same. Driver, defconfig and devicetree changes should
+all be split into separate branches and appear in separate pull requests to the
+SoC maintainers.  Each branch should be usable by itself and avoid
+regressions that originate from dependencies on other branches.
+
+Small sets of patches can also be sent as separate emails to soc@kernel.org,
+grouped into the same categories.
+
+If changes do not fit into the normal patterns, there can be additional
+top-level branches, e.g. for a treewide rework, or the addition of new SoC
+platforms including dts files and drivers.
+
+Branches with a lot of changes can benefit from getting split up into separate
+topics branches, even if they end up getting merged into the same branch of the
+SoC tree.  An example here would be one branch for devicetree warning fixes, one
+for a rework and one for newly added boards.
+
+Another common way to split up changes is to send an early pull request with the
+majority of the changes at some point between rc1 and rc4, following up with one
+or more smaller pull requests towards the end of the cycle that can add late
+changes or address problems identified while testing the first set.
+
+While there is no cut-off time for late pull requests, it helps to only send
+small branches as time gets closer to the merge window.
+
+Pull requests for bugfixes for the current release can be sent at any time, but
+again having multiple smaller branches is better than trying to combine too many
+patches into one pull request.
+
+The subject line of a pull request should begin with "[GIT PULL]" and made using
+a signed tag, rather than a branch.  This tag should contain a short description
+summarising the changes in the pull request.  For more detail on sending pull
+requests, please see Documentation/maintainer/pull-requests.rst.
diff --git a/Documentation/process/maintainer-tip.rst b/Documentation/process/maintainer-tip.rst
index 178c95fd17dca..08dd0f804410b 100644
--- a/Documentation/process/maintainer-tip.rst
+++ b/Documentation/process/maintainer-tip.rst
@@ -421,6 +421,9 @@ allowing themselves a breath. Please respect that.
 The release candidate -rc1 is the starting point for new patches to be
 applied which are targeted for the next merge window.
 
+So called _urgent_ branches will be merged into mainline during the
+stabilization phase of each release.
+
 
 Git
 ^^^
@@ -452,6 +455,8 @@ and can be added to an existing kernel config by running:
 Some of these options are x86-specific and can be left out when testing
 on other architectures.
 
+.. _maintainer-tip-coding-style:
+
 Coding style notes
 ------------------
 
diff --git a/Documentation/process/security-bugs.rst b/Documentation/process/security-bugs.rst
index 82e29837d5898..5a6993795bd26 100644
--- a/Documentation/process/security-bugs.rst
+++ b/Documentation/process/security-bugs.rst
@@ -63,31 +63,28 @@ information submitted to the security list and any followup discussions
 of the report are treated confidentially even after the embargo has been
 lifted, in perpetuity.
 
-Coordination
-------------
-
-Fixes for sensitive bugs, such as those that might lead to privilege
-escalations, may need to be coordinated with the private
-<linux-distros@vs.openwall.org> mailing list so that distribution vendors
-are well prepared to issue a fixed kernel upon public disclosure of the
-upstream fix. Distros will need some time to test the proposed patch and
-will generally request at least a few days of embargo, and vendor update
-publication prefers to happen Tuesday through Thursday. When appropriate,
-the security team can assist with this coordination, or the reporter can
-include linux-distros from the start. In this case, remember to prefix
-the email Subject line with "[vs]" as described in the linux-distros wiki:
-<http://oss-security.openwall.org/wiki/mailing-lists/distros#how-to-use-the-lists>
+Coordination with other groups
+------------------------------
+
+The kernel security team strongly recommends that reporters of potential
+security issues NEVER contact the "linux-distros" mailing list until
+AFTER discussing it with the kernel security team.  Do not Cc: both
+lists at once.  You may contact the linux-distros mailing list after a
+fix has been agreed on and you fully understand the requirements that
+doing so will impose on you and the kernel community.
+
+The different lists have different goals and the linux-distros rules do
+not contribute to actually fixing any potential security problems.
 
 CVE assignment
 --------------
 
-The security team does not normally assign CVEs, nor do we require them
-for reports or fixes, as this can needlessly complicate the process and
-may delay the bug handling. If a reporter wishes to have a CVE identifier
-assigned ahead of public disclosure, they will need to contact the private
-linux-distros list, described above. When such a CVE identifier is known
-before a patch is provided, it is desirable to mention it in the commit
-message if the reporter agrees.
+The security team does not assign CVEs, nor do we require them for
+reports or fixes, as this can needlessly complicate the process and may
+delay the bug handling.  If a reporter wishes to have a CVE identifier
+assigned, they should find one by themselves, for example by contacting
+MITRE directly.  However under no circumstances will a patch inclusion
+be delayed to wait for a CVE identifier to arrive.
 
 Non-disclosure agreements
 -------------------------
diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst
index 486875fd73c05..efac910e26590 100644
--- a/Documentation/process/submitting-patches.rst
+++ b/Documentation/process/submitting-patches.rst
@@ -331,6 +331,31 @@ explaining difference against previous submission (see
 See Documentation/process/email-clients.rst for recommendations on email
 clients and mailing list etiquette.
 
+.. _interleaved_replies:
+
+Use trimmed interleaved replies in email discussions
+----------------------------------------------------
+Top-posting is strongly discouraged in Linux kernel development
+discussions. Interleaved (or "inline") replies make conversations much
+easier to follow. For more details see:
+https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
+
+As is frequently quoted on the mailing list::
+
+  A: http://en.wikipedia.org/wiki/Top_post
+  Q: Were do I find info about this thing called top-posting?
+  A: Because it messes up the order in which people normally read text.
+  Q: Why is top-posting such a bad thing?
+  A: Top-posting.
+  Q: What is the most annoying thing in e-mail?
+
+Similarly, please trim all unneeded quotations that aren't relevant
+to your reply. This makes responses easier to find, and saves time and
+space. For more details see: http://daringfireball.net/2007/07/on_top ::
+
+  A: No.
+  Q: Should I include quotations after my reply?
+
 .. _resend_reminders:
 
 Don't get discouraged - or impatient
diff --git a/Documentation/riscv/acpi.rst b/Documentation/riscv/acpi.rst
new file mode 100644
index 0000000000000..9870a282815b2
--- /dev/null
+++ b/Documentation/riscv/acpi.rst
@@ -0,0 +1,10 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============
+ACPI on RISC-V
+==============
+
+The ISA string parsing rules for ACPI are defined by `Version ASCIIDOC
+Conversion, 12/2022 of the RISC-V specifications, as defined by tag
+"riscv-isa-release-1239329-2023-05-23" (commit 1239329
+) <https://github.com/riscv/riscv-isa-manual/releases/tag/riscv-isa-release-1239329-2023-05-23>`_
diff --git a/Documentation/riscv/hwprobe.rst b/Documentation/riscv/hwprobe.rst
index 9f0dd62dcb5db..933c715065d6f 100644
--- a/Documentation/riscv/hwprobe.rst
+++ b/Documentation/riscv/hwprobe.rst
@@ -49,7 +49,7 @@ The following keys are defined:
     privileged ISA, with the following known exceptions (more exceptions may be
     added, but only if it can be demonstrated that the user ABI is not broken):
 
-    * The :fence.i: instruction cannot be directly executed by userspace
+    * The ``fence.i`` instruction cannot be directly executed by userspace
       programs (it may still be executed in userspace via a
       kernel-controlled mechanism such as the vDSO).
 
@@ -64,6 +64,19 @@ The following keys are defined:
   * :c:macro:`RISCV_HWPROBE_IMA_C`: The C extension is supported, as defined
     by version 2.2 of the RISC-V ISA manual.
 
+  * :c:macro:`RISCV_HWPROBE_IMA_V`: The V extension is supported, as defined by
+    version 1.0 of the RISC-V Vector extension manual.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZBA`: The Zba address generation extension is
+       supported, as defined in version 1.0 of the Bit-Manipulation ISA
+       extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZBB`: The Zbb extension is supported, as defined
+       in version 1.0 of the Bit-Manipulation ISA extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZBS`: The Zbs extension is supported, as defined
+       in version 1.0 of the Bit-Manipulation ISA extensions.
+
 * :c:macro:`RISCV_HWPROBE_KEY_CPUPERF_0`: A bitmask that contains performance
   information about the selected set of processors.
 
diff --git a/Documentation/riscv/index.rst b/Documentation/riscv/index.rst
index 175a91db0200e..81cf6e616476a 100644
--- a/Documentation/riscv/index.rst
+++ b/Documentation/riscv/index.rst
@@ -5,11 +5,13 @@ RISC-V architecture
 .. toctree::
     :maxdepth: 1
 
+    acpi
     boot-image-header
     vm-layout
     hwprobe
     patch-acceptance
     uabi
+    vector
 
     features
 
diff --git a/Documentation/riscv/vector.rst b/Documentation/riscv/vector.rst
new file mode 100644
index 0000000000000..165b7ed0ac4f1
--- /dev/null
+++ b/Documentation/riscv/vector.rst
@@ -0,0 +1,140 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+Vector Extension Support for RISC-V Linux
+=========================================
+
+This document briefly outlines the interface provided to userspace by Linux in
+order to support the use of the RISC-V Vector Extension.
+
+1.  prctl() Interface
+---------------------
+
+Two new prctl() calls are added to allow programs to manage the enablement
+status for the use of Vector in userspace. The intended usage guideline for
+these interfaces is to give init systems a way to modify the availability of V
+for processes running under its domain. Calling thess interfaces is not
+recommended in libraries routines because libraries should not override policies
+configured from the parant process. Also, users must noted that these interfaces
+are not portable to non-Linux, nor non-RISC-V environments, so it is discourage
+to use in a portable code. To get the availability of V in an ELF program,
+please read :c:macro:`COMPAT_HWCAP_ISA_V` bit of :c:macro:`ELF_HWCAP` in the
+auxiliary vector.
+
+* prctl(PR_RISCV_V_SET_CONTROL, unsigned long arg)
+
+    Sets the Vector enablement status of the calling thread, where the control
+    argument consists of two 2-bit enablement statuses and a bit for inheritance
+    mode. Other threads of the calling process are unaffected.
+
+    Enablement status is a tri-state value each occupying 2-bit of space in
+    the control argument:
+
+    * :c:macro:`PR_RISCV_V_VSTATE_CTRL_DEFAULT`: Use the system-wide default
+      enablement status on execve(). The system-wide default setting can be
+      controlled via sysctl interface (see sysctl section below).
+
+    * :c:macro:`PR_RISCV_V_VSTATE_CTRL_ON`: Allow Vector to be run for the
+      thread.
+
+    * :c:macro:`PR_RISCV_V_VSTATE_CTRL_OFF`: Disallow Vector. Executing Vector
+      instructions under such condition will trap and casuse the termination of the thread.
+
+    arg: The control argument is a 5-bit value consisting of 3 parts, and
+    accessed by 3 masks respectively.
+
+    The 3 masks, PR_RISCV_V_VSTATE_CTRL_CUR_MASK,
+    PR_RISCV_V_VSTATE_CTRL_NEXT_MASK, and PR_RISCV_V_VSTATE_CTRL_INHERIT
+    represents bit[1:0], bit[3:2], and bit[4]. bit[1:0] accounts for the
+    enablement status of current thread, and the setting at bit[3:2] takes place
+    at next execve(). bit[4] defines the inheritance mode of the setting in
+    bit[3:2].
+
+        * :c:macro:`PR_RISCV_V_VSTATE_CTRL_CUR_MASK`: bit[1:0]: Account for the
+          Vector enablement status for the calling thread. The calling thread is
+          not able to turn off Vector once it has been enabled. The prctl() call
+          fails with EPERM if the value in this mask is PR_RISCV_V_VSTATE_CTRL_OFF
+          but the current enablement status is not off. Setting
+          PR_RISCV_V_VSTATE_CTRL_DEFAULT here takes no effect but to set back
+          the original enablement status.
+
+        * :c:macro:`PR_RISCV_V_VSTATE_CTRL_NEXT_MASK`: bit[3:2]: Account for the
+          Vector enablement setting for the calling thread at the next execve()
+          system call. If PR_RISCV_V_VSTATE_CTRL_DEFAULT is used in this mask,
+          then the enablement status will be decided by the system-wide
+          enablement status when execve() happen.
+
+        * :c:macro:`PR_RISCV_V_VSTATE_CTRL_INHERIT`: bit[4]: the inheritance
+          mode for the setting at PR_RISCV_V_VSTATE_CTRL_NEXT_MASK. If the bit
+          is set then the following execve() will not clear the setting in both
+          PR_RISCV_V_VSTATE_CTRL_NEXT_MASK and PR_RISCV_V_VSTATE_CTRL_INHERIT.
+          This setting persists across changes in the system-wide default value.
+
+    Return value:
+        * 0 on success;
+        * EINVAL: Vector not supported, invalid enablement status for current or
+          next mask;
+        * EPERM: Turning off Vector in PR_RISCV_V_VSTATE_CTRL_CUR_MASK if Vector
+          was enabled for the calling thread.
+
+    On success:
+        * A valid setting for PR_RISCV_V_VSTATE_CTRL_CUR_MASK takes place
+          immediately. The enablement status specified in
+          PR_RISCV_V_VSTATE_CTRL_NEXT_MASK happens at the next execve() call, or
+          all following execve() calls if PR_RISCV_V_VSTATE_CTRL_INHERIT bit is
+          set.
+        * Every successful call overwrites a previous setting for the calling
+          thread.
+
+* prctl(PR_RISCV_V_GET_CONTROL)
+
+    Gets the same Vector enablement status for the calling thread. Setting for
+    next execve() call and the inheritance bit are all OR-ed together.
+
+    Note that ELF programs are able to get the availability of V for itself by
+    reading :c:macro:`COMPAT_HWCAP_ISA_V` bit of :c:macro:`ELF_HWCAP` in the
+    auxiliary vector.
+
+    Return value:
+        * a nonnegative value on success;
+        * EINVAL: Vector not supported.
+
+2.  System runtime configuration (sysctl)
+-----------------------------------------
+
+To mitigate the ABI impact of expansion of the signal stack, a
+policy mechanism is provided to the administrators, distro maintainers, and
+developers to control the default Vector enablement status for userspace
+processes in form of sysctl knob:
+
+* /proc/sys/abi/riscv_v_default_allow
+
+    Writing the text representation of 0 or 1 to this file sets the default
+    system enablement status for new starting userspace programs. Valid values
+    are:
+
+    * 0: Do not allow Vector code to be executed as the default for new processes.
+    * 1: Allow Vector code to be executed as the default for new processes.
+
+    Reading this file returns the current system default enablement status.
+
+    At every execve() call, a new enablement status of the new process is set to
+    the system default, unless:
+
+      * PR_RISCV_V_VSTATE_CTRL_INHERIT is set for the calling process, and the
+        setting in PR_RISCV_V_VSTATE_CTRL_NEXT_MASK is not
+        PR_RISCV_V_VSTATE_CTRL_DEFAULT. Or,
+
+      * The setting in PR_RISCV_V_VSTATE_CTRL_NEXT_MASK is not
+        PR_RISCV_V_VSTATE_CTRL_DEFAULT.
+
+    Modifying the system default enablement status does not affect the enablement
+    status of any existing process of thread that do not make an execve() call.
+
+3.  Vector Register State Across System Calls
+---------------------------------------------
+
+As indicated by version 1.0 of the V extension [1], vector registers are
+clobbered by system calls.
+
+1: https://github.com/riscv/riscv-v-spec/blob/master/calling-convention.adoc
diff --git a/Documentation/rust/quick-start.rst b/Documentation/rust/quick-start.rst
index 13b7744b1e275..a8931512ed989 100644
--- a/Documentation/rust/quick-start.rst
+++ b/Documentation/rust/quick-start.rst
@@ -38,9 +38,9 @@ and run::
 
 	rustup override set $(scripts/min-tool-version.sh rustc)
 
-Otherwise, fetch a standalone installer or install ``rustup`` from:
+Otherwise, fetch a standalone installer from:
 
-	https://www.rust-lang.org
+	https://forge.rust-lang.org/infra/other-installation-methods.html#standalone
 
 
 Rust standard library source
diff --git a/Documentation/scheduler/sched-deadline.rst b/Documentation/scheduler/sched-deadline.rst
index 9d9be52f221a5..9fe4846079bbe 100644
--- a/Documentation/scheduler/sched-deadline.rst
+++ b/Documentation/scheduler/sched-deadline.rst
@@ -203,12 +203,15 @@ Deadline Task Scheduling
   - Total bandwidth (this_bw): this is the sum of all tasks "belonging" to the
     runqueue, including the tasks in Inactive state.
 
+  - Maximum usable bandwidth (max_bw): This is the maximum bandwidth usable by
+    deadline tasks and is currently set to the RT capacity.
+
 
  The algorithm reclaims the bandwidth of the tasks in Inactive state.
  It does so by decrementing the runtime of the executing task Ti at a pace equal
  to
 
-           dq = -max{ Ui / Umax, (1 - Uinact - Uextra) } dt
+           dq = -(max{ Ui, (Umax - Uinact - Uextra) } / Umax) dt
 
  where:
 
diff --git a/Documentation/scsi/arcmsr_spec.rst b/Documentation/scsi/arcmsr_spec.rst
index 83dd53bcff784..792c731b65708 100644
--- a/Documentation/scsi/arcmsr_spec.rst
+++ b/Documentation/scsi/arcmsr_spec.rst
@@ -1,3 +1,4 @@
+===================
 ARECA FIRMWARE SPEC
 ===================
 
diff --git a/Documentation/scsi/dc395x.rst b/Documentation/scsi/dc395x.rst
index d779e782b1cbe..d92947c175a52 100644
--- a/Documentation/scsi/dc395x.rst
+++ b/Documentation/scsi/dc395x.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-======================================
-README file for the dc395x SCSI driver
-======================================
+==================
+dc395x SCSI driver
+==================
 
 Status
 ------
@@ -11,13 +11,10 @@ be safe to use. Testing with hard disks has not been done to any
 great degree and caution should be exercised if you want to attempt
 to use this driver with hard disks.
 
-This is a 2.5 only driver. For a 2.4 driver please see the original
-driver (which this driver started from) at
-http://www.garloff.de/kurt/linux/dc395/
-
-Problems, questions and patches should be submitted to the mailing
-list. Details on the list, including archives, are available at
-http://lists.twibble.org/mailman/listinfo/dc395x/
+This driver is evolved from `the original 2.4 driver
+<https://web.archive.org/web/20140129181343/http://www.garloff.de/kurt/linux/dc395/>`_.
+Problems, questions and patches should be submitted to the `Linux SCSI
+mailing list <linux-scsi@vger.kernel.org>`_.
 
 Parameters
 ----------
diff --git a/Documentation/scsi/g_NCR5380.rst b/Documentation/scsi/g_NCR5380.rst
index a282059fec43c..b250c24fc760c 100644
--- a/Documentation/scsi/g_NCR5380.rst
+++ b/Documentation/scsi/g_NCR5380.rst
@@ -1,9 +1,9 @@
 .. SPDX-License-Identifier: GPL-2.0
 .. include:: <isonum.txt>
 
-==========================================
-README file for the Linux g_NCR5380 driver
-==========================================
+================
+g_NCR5380 driver
+================
 
 Copyright |copy| 1993 Drew Eckhard
 
diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst
index 919f3edfe1bf9..f15a0f348ae46 100644
--- a/Documentation/scsi/index.rst
+++ b/Documentation/scsi/index.rst
@@ -4,6 +4,38 @@
 SCSI Subsystem
 ==============
 
+.. toctree::
+   :maxdepth: 1
+
+Introduction
+============
+
+.. toctree::
+   :maxdepth: 1
+
+   scsi
+
+SCSI driver APIs
+================
+
+.. toctree::
+   :maxdepth: 1
+
+   scsi_mid_low_api
+   scsi_eh
+
+SCSI driver parameters
+======================
+
+.. toctree::
+   :maxdepth: 1
+
+   scsi-parameters
+   link_power_management_policy
+
+SCSI host adapter drivers
+=========================
+
 .. toctree::
    :maxdepth: 1
 
@@ -25,7 +57,6 @@ SCSI Subsystem
    hpsa
    hptiop
    libsas
-   link_power_management_policy
    lpfc
    megaraid
    ncr53c8xx
@@ -33,12 +64,8 @@ SCSI Subsystem
    ppa
    qlogicfas
    scsi-changer
-   scsi_eh
    scsi_fc_transport
    scsi-generic
-   scsi_mid_low_api
-   scsi-parameters
-   scsi
    sd-parameters
    smartpqi
    st
diff --git a/Documentation/scsi/megaraid.rst b/Documentation/scsi/megaraid.rst
index 22b75a86ba720..10a6b05fc7c49 100644
--- a/Documentation/scsi/megaraid.rst
+++ b/Documentation/scsi/megaraid.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-==========================
-Notes on Management Module
-==========================
+=================================
+Megaraid Common Management Module
+=================================
 
 Overview
 --------
diff --git a/Documentation/scsi/ncr53c8xx.rst b/Documentation/scsi/ncr53c8xx.rst
index 1c79e08ec9649..fd8d26dc5dab9 100644
--- a/Documentation/scsi/ncr53c8xx.rst
+++ b/Documentation/scsi/ncr53c8xx.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-=================================================
-The Linux NCR53C8XX/SYM53C8XX drivers README file
-=================================================
+===========================
+NCR53C8XX/SYM53C8XX drivers
+===========================
 
 Written by Gerard Roudier <groudier@free.fr>
 
diff --git a/Documentation/scsi/scsi-changer.rst b/Documentation/scsi/scsi-changer.rst
index ab60e7e61a6c5..5d828c7f492d4 100644
--- a/Documentation/scsi/scsi-changer.rst
+++ b/Documentation/scsi/scsi-changer.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-========================================
-README for the SCSI media changer driver
-========================================
+=========================
+SCSI media changer driver
+=========================
 
 This is a driver for SCSI Medium Changer devices, which are listed
 with "Type: Medium Changer" in /proc/scsi/scsi.
diff --git a/Documentation/scsi/scsi-generic.rst b/Documentation/scsi/scsi-generic.rst
index 258505e557a63..b82ffe4d8892a 100644
--- a/Documentation/scsi/scsi-generic.rst
+++ b/Documentation/scsi/scsi-generic.rst
@@ -1,15 +1,15 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-=======================================
-Notes on Linux SCSI Generic (sg) driver
-=======================================
+========================
+SCSI Generic (sg) driver
+========================
 
                                                         20020126
 
 Introduction
 ============
 The SCSI Generic driver (sg) is one of the four "high level" SCSI device
-drivers along with sd, st and sr (disk, tape and CDROM respectively). Sg
+drivers along with sd, st and sr (disk, tape and CD-ROM respectively). Sg
 is more generalized (but lower level) than its siblings and tends to be
 used on SCSI devices that don't fit into the already serviced categories.
 Thus sg is used for scanners, CD writers and reading audio CDs digitally
@@ -22,7 +22,7 @@ and examples.
 
 Major versions of the sg driver
 ===============================
-There are three major versions of sg found in the linux kernel (lk):
+There are three major versions of sg found in the Linux kernel (lk):
       - sg version 1 (original) from 1992 to early 1999 (lk 2.2.5) .
 	It is based in the sg_header interface structure.
       - sg version 2 from lk 2.2.6 in the 2.2 series. It is based on
@@ -33,34 +33,24 @@ There are three major versions of sg found in the linux kernel (lk):
 
 Sg driver documentation
 =======================
-The most recent documentation of the sg driver is kept at the Linux
-Documentation Project's (LDP) site:
+The most recent documentation of the sg driver is kept at
 
-- http://www.tldp.org/HOWTO/SCSI-Generic-HOWTO
+- https://sg.danny.cz/sg/
 
 This describes the sg version 3 driver found in the lk 2.4 series.
 
-The LDP renders documents in single and multiple page HTML, postscript
-and pdf. This document can also be found at:
+Documentation (large version) for the version 2 sg driver found in the
+lk 2.2 series can be found at
 
-- http://sg.danny.cz/sg/p/sg_v3_ho.html
-
-Documentation for the version 2 sg driver found in the lk 2.2 series can
-be found at http://sg.danny.cz/sg/. A larger version
-is at: http://sg.danny.cz/sg/p/scsi-generic_long.txt.
+- https://sg.danny.cz/sg/p/scsi-generic_long.txt.
 
 The original documentation for the sg driver (prior to lk 2.2.6) can be
-found at http://www.torque.net/sg/p/original/SCSI-Programming-HOWTO.txt
-and in the LDP archives.
+found in the LDP archives at
 
-A changelog with brief notes can be found in the
-/usr/src/linux/include/scsi/sg.h file. Note that the glibc maintainers copy
-and edit this file (removing its changelog for example) before placing it
-in /usr/include/scsi/sg.h . Driver debugging information and other notes
-can be found at the top of the /usr/src/linux/drivers/scsi/sg.c file.
+- https://tldp.org/HOWTO/archived/SCSI-Programming-HOWTO/index.html
 
 A more general description of the Linux SCSI subsystem of which sg is a
-part can be found at http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO .
+part can be found at https://www.tldp.org/HOWTO/SCSI-2.4-HOWTO .
 
 
 Example code and utilities
@@ -73,8 +63,8 @@ There are two packages of sg utilities:
                 and earlier
     =========   ==========================================================
 
-Both packages will work in the lk 2.4 series however sg3_utils offers more
-capabilities. They can be found at: http://sg.danny.cz/sg/sg3_utils.html and
+Both packages will work in the lk 2.4 series. However, sg3_utils offers more
+capabilities. They can be found at: https://sg.danny.cz/sg/sg3_utils.html and
 freecode.com
 
 Another approach is to look at the applications that use the sg driver.
@@ -83,7 +73,7 @@ These include cdrecord, cdparanoia, SANE and cdrdao.
 
 Mapping of Linux kernel versions to sg driver versions
 ======================================================
-Here is a list of linux kernels in the 2.4 series that had new version
+Here is a list of Linux kernels in the 2.4 series that had the new version
 of the sg driver:
 
      - lk 2.4.0 : sg version 3.1.17
@@ -92,10 +82,10 @@ of the sg driver:
      - lk 2.4.17 : sg version 3.1.22
 
 .. [#] There were 3 changes to sg version 3.1.20 by third parties in the
-       next six linux kernel versions.
+       next six Linux kernel versions.
 
-For reference here is a list of linux kernels in the 2.2 series that had
-new version of the sg driver:
+For reference here is a list of Linux kernels in the 2.2 series that had
+the new version of the sg driver:
 
      - lk 2.2.0 : original sg version [with no version number]
      - lk 2.2.6 : sg version 2.1.31
@@ -106,9 +96,8 @@ new version of the sg driver:
      - lk 2.2.17 : sg version 2.1.39
      - lk 2.2.20 : sg version 2.1.40
 
-The lk 2.5 development series has recently commenced and it currently
-contains sg version 3.5.23 which is functionally equivalent to sg
-version 3.1.22 found in lk 2.4.17.
+The lk 2.5 development series currently contains sg version 3.5.23
+which is functionally equivalent to sg version 3.1.22 found in lk 2.4.17.
 
 
 Douglas Gilbert
diff --git a/Documentation/scsi/scsi.rst b/Documentation/scsi/scsi.rst
index 276918eb4d744..8556846b9f63d 100644
--- a/Documentation/scsi/scsi.rst
+++ b/Documentation/scsi/scsi.rst
@@ -6,30 +6,28 @@ SCSI subsystem documentation
 
 The Linux Documentation Project (LDP) maintains a document describing
 the SCSI subsystem in the Linux kernel (lk) 2.4 series. See:
-http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO . The LDP has single
+https://www.tldp.org/HOWTO/SCSI-2.4-HOWTO . The LDP has single
 and multiple page HTML renderings as well as postscript and pdf.
-It can also be found at:
-http://web.archive.org/web/%2E/http://www.torque.net/scsi/SCSI-2.4-HOWTO
 
 Notes on using modules in the SCSI subsystem
 ============================================
-The scsi support in the linux kernel can be modularized in a number of
+The SCSI support in the Linux kernel can be modularized in a number of
 different ways depending upon the needs of the end user.  To understand
 your options, we should first define a few terms.
 
-The scsi-core (also known as the "mid level") contains the core of scsi
-support.  Without it you can do nothing with any of the other scsi drivers.
-The scsi core support can be a module (scsi_mod.o), or it can be built into
-the kernel. If the core is a module, it must be the first scsi module
+The scsi-core (also known as the "mid level") contains the core of SCSI
+support.  Without it you can do nothing with any of the other SCSI drivers.
+The SCSI core support can be a module (scsi_mod.o), or it can be built into
+the kernel. If the core is a module, it must be the first SCSI module
 loaded, and if you unload the modules, it will have to be the last one
-unloaded.  In practice the modprobe and rmmod commands (and "autoclean")
+unloaded.  In practice the modprobe and rmmod commands
 will enforce the correct ordering of loading and unloading modules in
 the SCSI subsystem.
 
 The individual upper and lower level drivers can be loaded in any order
-once the scsi core is present in the kernel (either compiled in or loaded
-as a module).  The disk driver (sd_mod.o), cdrom driver (sr_mod.o),
-tape driver [1]_ (st.o) and scsi generics driver (sg.o) represent the upper
+once the SCSI core is present in the kernel (either compiled in or loaded
+as a module).  The disk driver (sd_mod.o), CD-ROM driver (sr_mod.o),
+tape driver [1]_ (st.o) and SCSI generics driver (sg.o) represent the upper
 level drivers to support the various assorted devices which can be
 controlled.  You can for example load the tape driver to use the tape drive,
 and then unload it once you have no further need for the driver (and release
@@ -44,4 +42,3 @@ built into the kernel.
 
 .. [1] There is a variant of the st driver for controlling OnStream tape
        devices. Its module name is osst.o .
-
diff --git a/Documentation/scsi/scsi_fc_transport.rst b/Documentation/scsi/scsi_fc_transport.rst
index 176c1862cb9bc..e3ddcfb7f8fd3 100644
--- a/Documentation/scsi/scsi_fc_transport.rst
+++ b/Documentation/scsi/scsi_fc_transport.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-================
-SCSI FC Tansport
-================
+=================
+SCSI FC Transport
+=================
 
 Date:  11/18/2008
 
@@ -556,5 +556,5 @@ The following people have contributed to this document:
 
 
 James Smart
-james.smart@emulex.com
+james.smart@broadcom.com
 
diff --git a/Documentation/scsi/sym53c8xx_2.rst b/Documentation/scsi/sym53c8xx_2.rst
index 004f1a750e7d5..4eb047921dced 100644
--- a/Documentation/scsi/sym53c8xx_2.rst
+++ b/Documentation/scsi/sym53c8xx_2.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-=========================================
-The Linux SYM-2 driver documentation file
-=========================================
+============
+SYM-2 driver
+============
 
 Written by Gerard Roudier <groudier@free.fr>
 
diff --git a/Documentation/sound/cards/audigy-mixer.rst b/Documentation/sound/cards/audigy-mixer.rst
index aa176451d5b58..ea66b50a2b035 100644
--- a/Documentation/sound/cards/audigy-mixer.rst
+++ b/Documentation/sound/cards/audigy-mixer.rst
@@ -227,7 +227,7 @@ PCM stream related controls
 
 name='EMU10K1 PCM Volume',index 0-31
 ------------------------------------
-Channel volume attenuation in range 0-0xffff. The maximum value (no
+Channel volume attenuation in range 0-0x1fffd. The middle value (no
 attenuation) is default. The channel mapping for three values is
 as follows:
 
@@ -240,30 +240,30 @@ name='EMU10K1 PCM Send Routing',index 0-31
 This control specifies the destination - FX-bus accumulators. There are 24
 values in this mapping:
 
-* 0 -  mono, A destination (FX-bus 0-63), default 0
-* 1 -  mono, B destination (FX-bus 0-63), default 1
-* 2 -  mono, C destination (FX-bus 0-63), default 2
-* 3 -  mono, D destination (FX-bus 0-63), default 3
-* 4 -  mono, E destination (FX-bus 0-63), default 0
-* 5 -  mono, F destination (FX-bus 0-63), default 0
-* 6 -  mono, G destination (FX-bus 0-63), default 0
-* 7 -  mono, H destination (FX-bus 0-63), default 0
-* 8 -  left, A destination (FX-bus 0-63), default 0
-* 9 -  left, B destination (FX-bus 0-63), default 1
+*  0 -  mono, A destination (FX-bus 0-63), default 0
+*  1 -  mono, B destination (FX-bus 0-63), default 1
+*  2 -  mono, C destination (FX-bus 0-63), default 2
+*  3 -  mono, D destination (FX-bus 0-63), default 3
+*  4 -  mono, E destination (FX-bus 0-63), default 4
+*  5 -  mono, F destination (FX-bus 0-63), default 5
+*  6 -  mono, G destination (FX-bus 0-63), default 6
+*  7 -  mono, H destination (FX-bus 0-63), default 7
+*  8 -  left, A destination (FX-bus 0-63), default 0
+*  9 -  left, B destination (FX-bus 0-63), default 1
 * 10 -  left, C destination (FX-bus 0-63), default 2
 * 11 -  left, D destination (FX-bus 0-63), default 3
-* 12 -  left, E destination (FX-bus 0-63), default 0
-* 13 -  left, F destination (FX-bus 0-63), default 0
-* 14 -  left, G destination (FX-bus 0-63), default 0
-* 15 -  left, H destination (FX-bus 0-63), default 0
+* 12 -  left, E destination (FX-bus 0-63), default 4
+* 13 -  left, F destination (FX-bus 0-63), default 5
+* 14 -  left, G destination (FX-bus 0-63), default 6
+* 15 -  left, H destination (FX-bus 0-63), default 7
 * 16 - right, A destination (FX-bus 0-63), default 0
 * 17 - right, B destination (FX-bus 0-63), default 1
 * 18 - right, C destination (FX-bus 0-63), default 2
 * 19 - right, D destination (FX-bus 0-63), default 3
-* 20 - right, E destination (FX-bus 0-63), default 0
-* 21 - right, F destination (FX-bus 0-63), default 0
-* 22 - right, G destination (FX-bus 0-63), default 0
-* 23 - right, H destination (FX-bus 0-63), default 0
+* 20 - right, E destination (FX-bus 0-63), default 4
+* 21 - right, F destination (FX-bus 0-63), default 5
+* 22 - right, G destination (FX-bus 0-63), default 6
+* 23 - right, H destination (FX-bus 0-63), default 7
 
 Don't forget that it's illegal to assign a channel to the same FX-bus accumulator 
 more than once (it means 0=0 && 1=0 is an invalid combination).
diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst
index c016f8c3b88bf..49c1f2f688f85 100644
--- a/Documentation/sound/cards/index.rst
+++ b/Documentation/sound/cards/index.rst
@@ -17,3 +17,4 @@ Card-Specific Information
    hdspm
    serial-u16550
    img-spdif-in
+   pcmtest
diff --git a/Documentation/sound/cards/pcmtest.rst b/Documentation/sound/cards/pcmtest.rst
new file mode 100644
index 0000000000000..e163522f32055
--- /dev/null
+++ b/Documentation/sound/cards/pcmtest.rst
@@ -0,0 +1,120 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Virtual PCM Test Driver
+===========================
+
+The Virtual PCM Test Driver emulates a generic PCM device, and can be used for
+testing/fuzzing of the userspace ALSA applications, as well as for testing/fuzzing of
+the PCM middle layer. Additionally, it can be used for simulating hard to reproduce
+problems with PCM devices.
+
+What can this driver do?
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+At this moment the driver can do the following things:
+	* Simulate both capture and playback processes
+	* Generate random or pattern-based capturing data
+	* Inject delays into the playback and capturing processes
+	* Inject errors during the PCM callbacks
+
+It supports up to 8 substreams and 4 channels. Also it supports both interleaved and
+non-interleaved access modes.
+
+Also, this driver can check the playback stream for containing the predefined pattern,
+which is used in the corresponding selftest (alsa/pcmtest-test.sh) to check the PCM middle
+layer data transferring functionality. Additionally, this driver redefines the default
+RESET ioctl, and the selftest covers this PCM API functionality as well.
+
+Configuration
+-------------
+
+The driver has several parameters besides the common ALSA module parameters:
+
+	* fill_mode (bool) - Buffer fill mode (see below)
+	* inject_delay (int)
+	* inject_hwpars_err (bool)
+	* inject_prepare_err (bool)
+	* inject_trigger_err (bool)
+
+
+Capture Data Generation
+-----------------------
+
+The driver has two modes of data generation: the first (0 in the fill_mode parameter)
+means random data generation, the second (1 in the fill_mode) - pattern-based
+data generation. Let's look at the second mode.
+
+First of all, you may want to specify the pattern for data generation. You can do it
+by writing the pattern to the debugfs file. There are pattern buffer debugfs entries
+for each channel, as well as entries which contain the pattern buffer length.
+
+	* /sys/kernel/debug/pcmtest/fill_pattern[0-3]
+	* /sys/kernel/debug/pcmtest/fill_pattern[0-3]_len
+
+To set the pattern for the channel 0 you can execute the following command:
+
+.. code-block:: bash
+
+	echo -n mycoolpattern > /sys/kernel/debug/pcmtest/fill_pattern0
+
+Then, after every capture action performed on the 'pcmtest' device the buffer for the
+channel 0 will contain 'mycoolpatternmycoolpatternmycoolpatternmy...'.
+
+The pattern itself can be up to 4096 bytes long.
+
+Delay injection
+---------------
+
+The driver has 'inject_delay' parameter, which has very self-descriptive name and
+can be used for time delay/speedup simulations. The parameter has integer type, and
+it means the delay added between module's internal timer ticks.
+
+If the 'inject_delay' value is positive, the buffer will be filled slower, if it is
+negative - faster. You can try it yourself by starting a recording in any
+audiorecording application (like Audacity) and selecting the 'pcmtest' device as a
+source.
+
+This parameter can be also used for generating a huge amount of sound data in a very
+short period of time (with the negative 'inject_delay' value).
+
+Errors injection
+----------------
+
+This module can be used for injecting errors into the PCM communication process. This
+action can help you to figure out how the userspace ALSA program behaves under unusual
+circumstances.
+
+For example, you can make all 'hw_params' PCM callback calls return EBUSY error by
+writing '1' to the 'inject_hwpars_err' module parameter:
+
+.. code-block:: bash
+
+	echo 1 > /sys/module/snd_pcmtest/parameters/inject_hwpars_err
+
+Errors can be injected into the following PCM callbacks:
+
+	* hw_params (EBUSY)
+	* prepare (EINVAL)
+	* trigger (EINVAL)
+
+Playback test
+-------------
+
+This driver can be also used for the playback functionality testing - every time you
+write the playback data to the 'pcmtest' PCM device and close it, the driver checks the
+buffer for containing the looped pattern (which is specified in the fill_pattern
+debugfs file for each channel). If the playback buffer content represents the looped
+pattern, 'pc_test' debugfs entry is set into '1'. Otherwise, the driver sets it to '0'.
+
+ioctl redefinition test
+-----------------------
+
+The driver redefines the 'reset' ioctl, which is default for all PCM devices. To test
+this functionality, we can trigger the reset ioctl and check the 'ioctl_test' debugfs
+entry:
+
+.. code-block:: bash
+
+	cat /sys/kernel/debug/pcmtest/ioctl_test
+
+If the ioctl is triggered successfully, this file will contain '1', and '0' otherwise.
diff --git a/Documentation/sound/cards/sb-live-mixer.rst b/Documentation/sound/cards/sb-live-mixer.rst
index 819886634400f..4dd9bfe01bd87 100644
--- a/Documentation/sound/cards/sb-live-mixer.rst
+++ b/Documentation/sound/cards/sb-live-mixer.rst
@@ -258,7 +258,7 @@ PCM stream related controls
 
 ``name='EMU10K1 PCM Volume',index 0-31``
 ----------------------------------------
-Channel volume attenuation in range 0-0xffff. The maximum value (no
+Channel volume attenuation in range 0-0x1fffd. The middle value (no
 attenuation) is default. The channel mapping for three values is
 as follows:
 
diff --git a/Documentation/sound/designs/compress-offload.rst b/Documentation/sound/designs/compress-offload.rst
index 935f325dbc773..655624f770921 100644
--- a/Documentation/sound/designs/compress-offload.rst
+++ b/Documentation/sound/designs/compress-offload.rst
@@ -268,11 +268,12 @@ with setting of meta_data and signalling for next track ::
               |                              |
               |                              V
               |                         +----------+
-              |                         |          |
-              |                         |NEXT_TRACK|
-              |                         |          |
-              |                         +----------+
-              |                              |
+              |    compr_set_params()   |          |
+              |             +-----------|NEXT_TRACK|
+              |             |           |          |
+              |             |           +--+-------+
+              |             |              | |
+              |             +--------------+ |
               |                              |
               |                              | compr_partial_drain()
               |                              |
diff --git a/Documentation/sound/designs/index.rst b/Documentation/sound/designs/index.rst
index 1eb08e7bae522..b79db9ad87325 100644
--- a/Documentation/sound/designs/index.rst
+++ b/Documentation/sound/designs/index.rst
@@ -15,3 +15,4 @@ Designs and Implementations
    oss-emulation
    seq-oss
    jack-injection
+   midi-2.0
diff --git a/Documentation/sound/designs/midi-2.0.rst b/Documentation/sound/designs/midi-2.0.rst
new file mode 100644
index 0000000000000..27d0d3dea1b0a
--- /dev/null
+++ b/Documentation/sound/designs/midi-2.0.rst
@@ -0,0 +1,378 @@
+=================
+MIDI 2.0 on Linux
+=================
+
+General
+=======
+
+MIDI 2.0 is an extended protocol for providing higher resolutions and
+more fine controls over the legacy MIDI 1.0.  The fundamental changes
+introduced for supporting MIDI 2.0 are:
+
+- Support of Universal MIDI Packet (UMP)
+- Support of MIDI 2.0 protocol messages
+- Transparent conversions between UMP and legacy MIDI 1.0 byte stream
+- MIDI-CI for property and profile configurations
+
+UMP is a new container format to hold all MIDI protocol 1.0 and MIDI
+2.0 protocol messages.  Unlike the former byte stream, it's 32bit
+aligned, and each message can be put in a single packet.  UMP can send
+the events up to 16 "UMP Groups", where each UMP Group contain up to
+16 MIDI channels.
+
+MIDI 2.0 protocol is an extended protocol to achieve the higher
+resolution and more controls over the old MIDI 1.0 protocol.
+
+MIDI-CI is a high-level protocol that can talk with the MIDI device
+for the flexible profiles and configurations.  It's represented in the
+form of special SysEx.
+
+For Linux implementations, the kernel supports the UMP transport and
+the encoding/decoding of MIDI protocols on UMP, while MIDI-CI is
+supported in user-space over the standard SysEx.
+
+As of this writing, only USB MIDI device supports the UMP and Linux
+2.0 natively.  The UMP support itself is pretty generic, hence it
+could be used by other transport layers, although it could be
+implemented differently (e.g. as a ALSA sequencer client), too.
+
+The access to UMP devices are provided in two ways: the access via
+rawmidi device and the access via ALSA sequencer API.
+
+ALSA sequencer API was extended to allow the payload of UMP packets.
+It's allowed to connect freely between MIDI 1.0 and MIDI 2.0 sequencer
+clients, and the events are converted transparently.
+
+
+Kernel Configuration
+====================
+
+The following new configs are added for supporting MIDI 2.0:
+`CONFIG_SND_UMP`, `CONFIG_SND_UMP_LEGACY_RAWMIDI`,
+`CONFIG_SND_SEQ_UMP`, `CONFIG_SND_SEQ_UMP_CLIENT`, and
+`CONFIG_SND_USB_AUDIO_MIDI_V2`.  The first visible one is
+`CONFIG_SND_USB_AUDIO_MIDI_V2`, and when you choose it (to set `=y`),
+the core support for UMP (`CONFIG_SND_UMP`) and the sequencer binding
+(`CONFIG_SND_SEQ_UMP_CLIENT`) will be automatically selected.
+
+Additionally, `CONFIG_SND_UMP_LEGACY_RAWMIDI=y` will enable the
+support for the legacy raw MIDI device for UMP Endpoints.
+
+
+Rawmidi Device with USB MIDI 2.0
+================================
+
+When a device supports MIDI 2.0, the USB-audio driver probes and uses
+the MIDI 2.0 interface (that is found always at the altset 1) as
+default instead of the MIDI 1.0 interface (at altset 0).  You can
+switch back to the binding with the old MIDI 1.0 interface by passing
+`midi2_enable=0` option to snd-usb-audio driver module, too.
+
+The USB audio driver tries to query the UMP Endpoint and UMP Function
+Block information that are provided since UMP v1.1, and builds up the
+topology based on those information.  When the device is older and
+doesn't respond to the new UMP inquiries, the driver falls back and
+builds the topology based on Group Terminal Block (GTB) information
+from the USB descriptor.  Some device might be screwed up by the
+unexpected UMP command; in such a case, pass `midi2_probe=0` option to
+snd-usb-audio driver for skipping the UMP v1.1 inquiries.
+
+When the MIDI 2.0 device is probed, the kernel creates a rawmidi
+device for each UMP Endpoint of the device.  Its device name is
+`/dev/snd/umpC*D*` and different from the standard rawmidi device name
+`/dev/snd/midiC*D*` for MIDI 1.0, in order to avoid confusing the
+legacy applications accessing mistakenly to UMP devices.
+
+You can read and write UMP packet data directly from/to this UMP
+rawmidi device.  For example, reading via `hexdump` like below will
+show the incoming UMP packets of the card 0 device 0 in the hex
+format::
+
+  % hexdump -C /dev/snd/umpC0D0
+  00000000  01 07 b0 20 00 07 b0 20  64 3c 90 20 64 3c 80 20  |... ... d<. d<. |
+
+Unlike the MIDI 1.0 byte stream, UMP is a 32bit packet, and the size
+for reading or writing the device is also aligned to 32bit (which is 4
+bytes).
+
+The 32-bit words in the UMP packet payload are always in CPU native
+endianness.  Transport drivers are responsible to convert UMP words
+from / to system endianness to required transport endianness / byte
+order.
+
+When `CONFIG_SND_UMP_LEGACY_RAWMIDI` is set, the driver creates
+another standard raw MIDI device additionally as `/dev/snd/midiC*D*`.
+This contains 16 substreams, and each substream corresponds to a
+(0-based) UMP Group.  Legacy applications can access to the specified
+group via each substream in MIDI 1.0 byte stream format.  With the
+ALSA rawmidi API, you can open the arbitrary substream, while just
+opening `/dev/snd/midiC*D*` will end up with opening the first
+substream.
+
+Each UMP Endpoint can provide the additional information, constructed
+from the information inquired via UMP 1.1 Stream messages or USB MIDI
+2.0 descriptors.  And a UMP Endpoint may contain one or more UMP
+Blocks, where UMP Block is an abstraction introduced in the ALSA UMP
+implementations to represent the associations among UMP Groups.  UMP
+Block corresponds to Function Block in UMP 1.1 specification.  When
+UMP 1.1 Function Block information isn't available, it's filled
+partially from Group Terminal Block (GTB) as defined in USB MIDI 2.0
+specifications.
+
+The information of UMP Endpoints and UMP Blocks are found in the proc
+file `/proc/asound/card*/midi*`.  For example::
+
+  % cat /proc/asound/card1/midi0
+  ProtoZOA MIDI
+  
+  Type: UMP
+  EP Name: ProtoZOA
+  EP Product ID: ABCD12345678
+  UMP Version: 0x0000
+  Protocol Caps: 0x00000100
+  Protocol: 0x00000100
+  Num Blocks: 3
+  
+  Block 0 (ProtoZOA Main)
+    Direction: bidirection
+    Active: Yes
+    Groups: 1-1
+    Is MIDI1: No
+
+  Block 1 (ProtoZOA Ext IN)
+    Direction: output
+    Active: Yes
+    Groups: 2-2
+    Is MIDI1: Yes (Low Speed)
+  ....
+
+Note that `Groups` field shown in the proc file above indicates the
+1-based UMP Group numbers (from-to).
+
+Those additional UMP Endpoint and UMP Block information can be
+obtained via the new ioctls `SNDRV_UMP_IOCTL_ENDPOINT_INFO` and
+`SNDRV_UMP_IOCTL_BLOCK_INFO`, respectively.
+
+The rawmidi name and the UMP Endpoint name are usually identical, and
+in the case of USB MIDI, it's taken from `iInterface` of the
+corresponding USB MIDI interface descriptor.  If it's not provided,
+it's copied from `iProduct` of the USB device descriptor as a
+fallback.
+
+The Endpoint Product ID is a string field and supposed to be unique.
+It's copied from `iSerialNumber` of the device for USB MIDI.
+
+The protocol capabilities and the actual protocol bits are defined in
+`asound.h`.
+
+
+ALSA Sequencer with USB MIDI 2.0
+================================
+
+In addition to the rawmidi interfaces, ALSA sequencer interface
+supports the new UMP MIDI 2.0 device, too.  Now, each ALSA sequencer
+client may set its MIDI version (0, 1 or 2) to declare itself being
+either the legacy, UMP MIDI 1.0 or UMP MIDI 2.0 device, respectively.
+The first, legacy client is the one that sends/receives the old
+sequencer event as was.  Meanwhile, UMP MIDI 1.0 and 2.0 clients send
+and receive in the extended event record for UMP.  The MIDI version is
+seen in the new `midi_version` field of `snd_seq_client_info`.
+
+A UMP packet can be sent/received in a sequencer event embedded by
+specifying the new event flag bit `SNDRV_SEQ_EVENT_UMP`.  When this
+flag is set, the event has 16 byte (128 bit) data payload for holding
+the UMP packet.  Without the `SNDRV_SEQ_EVENT_UMP` bit flag, the event
+is treated as a legacy event as it was (with max 12 byte data
+payload).
+
+With `SNDRV_SEQ_EVENT_UMP` flag set, the type field of a UMP sequencer
+event is ignored (but it should be set to 0 as default).
+
+The type of each client can be seen in `/proc/asound/seq/clients`.
+For example::
+
+  % cat /proc/asound/seq/clients
+  Client info
+    cur  clients : 3
+  ....
+  Client  14 : "Midi Through" [Kernel Legacy]
+    Port   0 : "Midi Through Port-0" (RWe-)
+  Client  20 : "ProtoZOA" [Kernel UMP MIDI1]
+    UMP Endpoint: ProtoZOA
+    UMP Block 0: ProtoZOA Main [Active]
+      Groups: 1-1
+    UMP Block 1: ProtoZOA Ext IN [Active]
+      Groups: 2-2
+    UMP Block 2: ProtoZOA Ext OUT [Active]
+      Groups: 3-3
+    Port   0 : "MIDI 2.0" (RWeX) [In/Out]
+    Port   1 : "ProtoZOA Main" (RWeX) [In/Out]
+    Port   2 : "ProtoZOA Ext IN" (-We-) [Out]
+    Port   3 : "ProtoZOA Ext OUT" (R-e-) [In]
+
+Here you can find two types of kernel clients, "Legacy" for client 14,
+and "UMP MIDI1" for client 20, which is a USB MIDI 2.0 device.
+A USB MIDI 2.0 client gives always the port 0 as "MIDI 2.0" and the
+rest ports from 1 for each UMP Group (e.g. port 1 for Group 1).
+In this example, the device has three active groups (Main, Ext IN and
+Ext OUT), and those are exposed as sequencer ports from 1 to 3.
+The "MIDI 2.0" port is for a UMP Endpoint, and its difference from
+other UMP Group ports is that UMP Endpoint port sends the events from
+the all ports on the device ("catch-all"), while each UMP Group port
+sends only the events from the given UMP Group.
+Also, UMP groupless messages (such as the UMP message type 0x0f) are
+sent only to the UMP Endpoint port.
+
+Note that, although each UMP sequencer client usually creates 16
+ports, those ports that don't belong to any UMP Blocks (or belonging
+to inactive UMP Blocks) are marked as inactive, and they don't appear
+in the proc outputs.  In the example above, the sequencer ports from 4
+to 16 are present but not shown there.
+
+The proc file above shows the UMP Block information, too.  The same
+entry (but with more detailed information) is found in the rawmidi
+proc output.
+
+When clients are connected between different MIDI versions, the events
+are translated automatically depending on the client's version, not
+only between the legacy and the UMP MIDI 1.0/2.0 types, but also
+between UMP MIDI 1.0 and 2.0 types, too.  For example, running
+`aseqdump` program on the ProtoZOA Main port in the legacy mode will
+give you the output like::
+
+  % aseqdump -p 20:1
+  Waiting for data. Press Ctrl+C to end.
+  Source  Event                  Ch  Data
+   20:1   Note on                 0, note 60, velocity 100
+   20:1   Note off                0, note 60, velocity 100
+   20:1   Control change          0, controller 11, value 4
+
+When you run `aseqdump` in MIDI 2.0 mode, it'll receive the high
+precision data like::
+
+  % aseqdump -u 2 -p 20:1
+  Waiting for data. Press Ctrl+C to end.
+  Source  Event                  Ch  Data
+   20:1   Note on                 0, note 60, velocity 0xc924, attr type = 0, data = 0x0
+   20:1   Note off                0, note 60, velocity 0xc924, attr type = 0, data = 0x0
+   20:1   Control change          0, controller 11, value 0x2000000
+
+while the data is automatically converted by ALSA sequencer core.
+
+
+Rawmidi API Extensions
+======================
+
+* The additional UMP Endpoint information can be obtained via the new
+  ioctl `SNDRV_UMP_IOCTL_ENDPOINT_INFO`.  It contains the associated
+  card and device numbers, the bit flags, the protocols, the number of
+  UMP Blocks, the name string of the endpoint, etc.
+
+  The protocols are specified in two field, the protocol capabilities
+  and the current protocol.  Both contain the bit flags specifying the
+  MIDI protocol version (`SNDRV_UMP_EP_INFO_PROTO_MIDI1` or
+  `SNDRV_UMP_EP_INFO_PROTO_MIDI2`) in the upper byte and the jitter
+  reduction timestamp (`SNDRV_UMP_EP_INFO_PROTO_JRTS_TX` and
+  `SNDRV_UMP_EP_INFO_PROTO_JRTS_RX`) in the lower byte.
+
+  A UMP Endpoint may contain up to 32 UMP Blocks, and the number of
+  the currently assigned blocks are shown in the Endpoint information.
+
+* Each UMP Block information can be obtained via another new ioctl
+  `SNDRV_UMP_IOCTL_BLOCK_INFO`.  The block ID number (0-based) has to
+  be passed for the block to query.  The received data contains the
+  associated the direction of the block, the first associated group ID
+  (0-based) and the number of groups, the name string of the block,
+  etc.
+
+  The direction is either `SNDRV_UMP_DIR_INPUT`,
+  `SNDRV_UMP_DIR_OUTPUT` or `SNDRV_UMP_DIR_BIDIRECTION`.
+
+* For the device supports UMP v1.1, the UMP MIDI protocol can be
+  switched via "Stream Configuration Request" message (UMP type 0x0f,
+  status 0x05).  When UMP core receives such a message, it updates the
+  UMP EP info and the corresponding sequencer clients as well.
+
+
+Control API Extensions
+======================
+
+* The new ioctl `SNDRV_CTL_IOCTL_UMP_NEXT_DEVICE` is introduced for
+  querying the next UMP rawmidi device, while the existing ioctl
+  `SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE` queries only the legacy
+  rawmidi devices.
+
+  For setting the subdevice (substream number) to be opened, use the
+  ioctl `SNDRV_CTL_IOCTL_RAWMIDI_PREFER_SUBDEVICE` like the normal
+  rawmidi.
+
+* Two new ioctls `SNDRV_CTL_IOCTL_UMP_ENDPOINT_INFO` and
+  `SNDRV_CTL_IOCTL_UMP_BLOCK_INFO` provide the UMP Endpoint and UMP
+  Block information of the specified UMP device via ALSA control API
+  without opening the actual (UMP) rawmidi device.
+  The `card` field is ignored upon inquiry, always tied with the card
+  of the control interface.
+
+
+Sequencer API Extensions
+========================
+
+* `midi_version` field is added to `snd_seq_client_info` to indicate
+  the current MIDI version (either 0, 1 or 2) of each client.
+  When `midi_version` is 1 or 2, the alignment of read from a UMP
+  sequencer client is also changed from the former 28 bytes to 32
+  bytes for the extended payload.  The alignment size for the write
+  isn't changed, but each event size may differ depending on the new
+  bit flag below.
+
+* `SNDRV_SEQ_EVENT_UMP` flag bit is added for each sequencer event
+  flags.  When this bit flag is set, the sequencer event is extended
+  to have a larger payload of 16 bytes instead of the legacy 12
+  bytes, and the event contains the UMP packet in the payload.
+
+* The new sequencer port type bit (`SNDRV_SEQ_PORT_TYPE_MIDI_UMP`)
+  indicates the port being UMP-capable.
+
+* The sequencer ports have new capability bits to indicate the
+  inactive ports (`SNDRV_SEQ_PORT_CAP_INACTIVE`) and the UMP Endpoint
+  port (`SNDRV_SEQ_PORT_CAP_UMP_ENDPOINT`).
+
+* The event conversion of ALSA sequencer clients can be suppressed the
+  new filter bit `SNDRV_SEQ_FILTER_NO_CONVERT` set to the client info.
+  For example, the kernel pass-through client (`snd-seq-dummy`) sets
+  this flag internally.
+
+* The port information gained the new field `direction` to indicate
+  the direction of the port (either `SNDRV_SEQ_PORT_DIR_INPUT`,
+  `SNDRV_SEQ_PORT_DIR_OUTPUT` or `SNDRV_SEQ_PORT_DIR_BIDIRECTION`).
+
+* Another additional field for the port information is `ump_group`
+  which specifies the associated UMP Group Number (1-based).
+  When it's non-zero, the UMP group field in the UMP packet updated
+  upon delivery to the specified group (corrected to be 0-based).
+  Each sequencer port is supposed to set this field if it's a port to
+  specific to a certain UMP group.
+
+* Each client may set the additional event filter for UMP Groups in
+  `group_filter` bitmap.  The filter consists of bitmap from 1-based
+  Group numbers.  For example, when the bit 1 is set, messages from
+  Group 1 (i.e. the very first group) are filtered and not delivered.
+  The bit 0 is used for filtering UMP groupless messages.
+
+* Two new ioctls are added for UMP-capable clients:
+  `SNDRV_SEQ_IOCTL_GET_CLIENT_UMP_INFO` and
+  `SNDRV_SEQ_IOCTL_SET_CLIENT_UMP_INFO`.  They are used to get and set
+  either `snd_ump_endpoint_info` or `snd_ump_block_info` data
+  associated with the sequencer client.  The USB MIDI driver provides
+  those information from the underlying UMP rawmidi, while a
+  user-space client may provide its own data via `*_SET` ioctl.
+  For an Endpoint data, pass 0 to the `type` field, while for a Block
+  data, pass the block number + 1 to the `type` field.
+  Setting the data for a kernel client shall result in an error.
+
+* With UMP 1.1, Function Block information may be changed
+  dynamically.  When the update of Function Block is received from the
+  device, ALSA sequencer core changes the corresponding sequencer port
+  name and attributes accordingly, and notifies the changes via the
+  announcement to the ALSA sequencer system port, similarly like the
+  normal port change notification.
diff --git a/Documentation/subsystem-apis.rst b/Documentation/subsystem-apis.rst
index b51f38527e148..b67a1b65855bb 100644
--- a/Documentation/subsystem-apis.rst
+++ b/Documentation/subsystem-apis.rst
@@ -10,6 +10,30 @@ is taken directly from the kernel source, with supplemental material added
 as needed (or at least as we managed to add it — probably *not* all that is
 needed).
 
+Human interfaces
+----------------
+
+.. toctree::
+   :maxdepth: 1
+
+   input/index
+   hid/index
+   sound/index
+   gpu/index
+   fb/index
+
+Storage interfaces
+------------------
+
+.. toctree::
+   :maxdepth: 1
+
+   filesystems/index
+   block/index
+   cdrom/index
+   scsi/index
+   target/index
+
 **Fixme**: much more organizational work is needed here.
 
 .. toctree::
@@ -19,12 +43,8 @@ needed).
    core-api/index
    locking/index
    accounting/index
-   block/index
-   cdrom/index
    cpu-freq/index
-   fb/index
    fpga/index
-   hid/index
    i2c/index
    iio/index
    isdn/index
@@ -34,26 +54,21 @@ needed).
    networking/index
    pcmcia/index
    power/index
-   target/index
    timers/index
    spi/index
    w1/index
    watchdog/index
    virt/index
-   input/index
    hwmon/index
-   gpu/index
    accel/index
    security/index
-   sound/index
    crypto/index
-   filesystems/index
    mm/index
    bpf/index
    usb/index
    PCI/index
-   scsi/index
    misc-devices/index
    scheduler/index
    mhi/index
    peci/index
+   wmi/index
diff --git a/Documentation/target/scripts.rst b/Documentation/target/scripts.rst
index 172d42b522e49..aa7b9c62c1b35 100644
--- a/Documentation/target/scripts.rst
+++ b/Documentation/target/scripts.rst
@@ -1,9 +1,3 @@
-TCM mod builder script
-----------------------
-
-.. literalinclude:: tcm_mod_builder.py
-    :language: perl
-
 Target export device script
 ---------------------------
 
diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py
deleted file mode 100755
index 54492aa813b9b..0000000000000
--- a/Documentation/target/tcm_mod_builder.py
+++ /dev/null
@@ -1,656 +0,0 @@
-#!/usr/bin/env python
-# The TCM v4 multi-protocol fabric module generation script for drivers/target/$NEW_MOD
-#
-# Copyright (c) 2010 Rising Tide Systems
-# Copyright (c) 2010 Linux-iSCSI.org
-#
-# Author: nab@kernel.org
-#
-import os, sys
-import subprocess as sub
-import string
-import re
-import optparse
-
-tcm_dir = ""
-
-fabric_ops = []
-fabric_mod_dir = ""
-fabric_mod_port = ""
-fabric_mod_init_port = ""
-
-def tcm_mod_err(msg):
-	print msg
-	sys.exit(1)
-
-def tcm_mod_create_module_subdir(fabric_mod_dir_var):
-
-	if os.path.isdir(fabric_mod_dir_var) == True:
-		return 1
-
-	print "Creating fabric_mod_dir: " + fabric_mod_dir_var
-	ret = os.mkdir(fabric_mod_dir_var)
-	if ret:
-		tcm_mod_err("Unable to mkdir " + fabric_mod_dir_var)
-
-	return
-
-def tcm_mod_build_FC_include(fabric_mod_dir_var, fabric_mod_name):
-	global fabric_mod_port
-	global fabric_mod_init_port
-	buf = ""
-
-	f = fabric_mod_dir_var + "/" + fabric_mod_name + "_base.h"
-	print "Writing file: " + f
-
-	p = open(f, 'w');
-	if not p:
-		tcm_mod_err("Unable to open file: " + f)
-
-	buf = "#define " + fabric_mod_name.upper() + "_VERSION	\"v0.1\"\n"
-	buf += "#define " + fabric_mod_name.upper() + "_NAMELEN	32\n"
-	buf += "\n"
-	buf += "struct " + fabric_mod_name + "_tpg {\n"
-	buf += "	/* FC lport target portal group tag for TCM */\n"
-	buf += "	u16 lport_tpgt;\n"
-	buf += "	/* Pointer back to " + fabric_mod_name + "_lport */\n"
-	buf += "	struct " + fabric_mod_name + "_lport *lport;\n"
-	buf += "	/* Returned by " + fabric_mod_name + "_make_tpg() */\n"
-	buf += "	struct se_portal_group se_tpg;\n"
-	buf += "};\n"
-	buf += "\n"
-	buf += "struct " + fabric_mod_name + "_lport {\n"
-	buf += "	/* Binary World Wide unique Port Name for FC Target Lport */\n"
-	buf += "	u64 lport_wwpn;\n"
-	buf += "	/* ASCII formatted WWPN for FC Target Lport */\n"
-	buf += "	char lport_name[" + fabric_mod_name.upper() + "_NAMELEN];\n"
-	buf += "	/* Returned by " + fabric_mod_name + "_make_lport() */\n"
-	buf += "	struct se_wwn lport_wwn;\n"
-	buf += "};\n"
-
-	ret = p.write(buf)
-	if ret:
-		tcm_mod_err("Unable to write f: " + f)
-
-	p.close()
-
-	fabric_mod_port = "lport"
-	fabric_mod_init_port = "nport"
-
-	return
-
-def tcm_mod_build_SAS_include(fabric_mod_dir_var, fabric_mod_name):
-	global fabric_mod_port
-	global fabric_mod_init_port
-	buf = ""
-
-	f = fabric_mod_dir_var + "/" + fabric_mod_name + "_base.h"
-	print "Writing file: " + f
-
-	p = open(f, 'w');
-	if not p:
-		tcm_mod_err("Unable to open file: " + f)
-
-	buf = "#define " + fabric_mod_name.upper() + "_VERSION  \"v0.1\"\n"
-	buf += "#define " + fabric_mod_name.upper() + "_NAMELEN 32\n"
-	buf += "\n"
-	buf += "struct " + fabric_mod_name + "_tpg {\n"
-	buf += "	/* SAS port target portal group tag for TCM */\n"
-	buf += "	u16 tport_tpgt;\n"
-	buf += "	/* Pointer back to " + fabric_mod_name + "_tport */\n"
-	buf += "	struct " + fabric_mod_name + "_tport *tport;\n"
-	buf += "	/* Returned by " + fabric_mod_name + "_make_tpg() */\n"
-	buf += "	struct se_portal_group se_tpg;\n"
-	buf += "};\n\n"
-	buf += "struct " + fabric_mod_name + "_tport {\n"
-	buf += "	/* Binary World Wide unique Port Name for SAS Target port */\n"
-	buf += "	u64 tport_wwpn;\n"
-	buf += "	/* ASCII formatted WWPN for SAS Target port */\n"
-	buf += "	char tport_name[" + fabric_mod_name.upper() + "_NAMELEN];\n"
-	buf += "	/* Returned by " + fabric_mod_name + "_make_tport() */\n"
-	buf += "	struct se_wwn tport_wwn;\n"
-	buf += "};\n"
-
-	ret = p.write(buf)
-	if ret:
-		tcm_mod_err("Unable to write f: " + f)
-
-	p.close()
-
-	fabric_mod_port = "tport"
-	fabric_mod_init_port = "iport"
-
-	return
-
-def tcm_mod_build_iSCSI_include(fabric_mod_dir_var, fabric_mod_name):
-	global fabric_mod_port
-	global fabric_mod_init_port
-	buf = ""
-
-	f = fabric_mod_dir_var + "/" + fabric_mod_name + "_base.h"
-	print "Writing file: " + f
-
-	p = open(f, 'w');
-	if not p:
-		tcm_mod_err("Unable to open file: " + f)
-
-	buf = "#define " + fabric_mod_name.upper() + "_VERSION  \"v0.1\"\n"
-	buf += "#define " + fabric_mod_name.upper() + "_NAMELEN 32\n"
-	buf += "\n"
-	buf += "struct " + fabric_mod_name + "_tpg {\n"
-	buf += "	/* iSCSI target portal group tag for TCM */\n"
-	buf += "	u16 tport_tpgt;\n"
-	buf += "	/* Pointer back to " + fabric_mod_name + "_tport */\n"
-	buf += "	struct " + fabric_mod_name + "_tport *tport;\n"
-	buf += "	/* Returned by " + fabric_mod_name + "_make_tpg() */\n"
-	buf += "	struct se_portal_group se_tpg;\n"
-	buf += "};\n\n"
-	buf += "struct " + fabric_mod_name + "_tport {\n"
-	buf += "	/* ASCII formatted TargetName for IQN */\n"
-	buf += "	char tport_name[" + fabric_mod_name.upper() + "_NAMELEN];\n"
-	buf += "	/* Returned by " + fabric_mod_name + "_make_tport() */\n"
-	buf += "	struct se_wwn tport_wwn;\n"
-	buf += "};\n"
-
-	ret = p.write(buf)
-	if ret:
-		tcm_mod_err("Unable to write f: " + f)
-
-	p.close()
-
-	fabric_mod_port = "tport"
-	fabric_mod_init_port = "iport"
-
-	return
-
-def tcm_mod_build_base_includes(proto_ident, fabric_mod_dir_val, fabric_mod_name):
-
-	if proto_ident == "FC":
-		tcm_mod_build_FC_include(fabric_mod_dir_val, fabric_mod_name)
-	elif proto_ident == "SAS":
-		tcm_mod_build_SAS_include(fabric_mod_dir_val, fabric_mod_name)
-	elif proto_ident == "iSCSI":
-		tcm_mod_build_iSCSI_include(fabric_mod_dir_val, fabric_mod_name)
-	else:
-		print "Unsupported proto_ident: " + proto_ident
-		sys.exit(1)
-
-	return
-
-def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
-	buf = ""
-
-	f = fabric_mod_dir_var + "/" + fabric_mod_name + "_configfs.c"
-	print "Writing file: " + f
-
-        p = open(f, 'w');
-        if not p:
-                tcm_mod_err("Unable to open file: " + f)
-
-	buf = "#include <linux/module.h>\n"
-	buf += "#include <linux/moduleparam.h>\n"
-	buf += "#include <linux/version.h>\n"
-	buf += "#include <generated/utsrelease.h>\n"
-	buf += "#include <linux/utsname.h>\n"
-	buf += "#include <linux/init.h>\n"
-	buf += "#include <linux/slab.h>\n"
-	buf += "#include <linux/kthread.h>\n"
-	buf += "#include <linux/types.h>\n"
-	buf += "#include <linux/string.h>\n"
-	buf += "#include <linux/configfs.h>\n"
-	buf += "#include <linux/ctype.h>\n"
-	buf += "#include <asm/unaligned.h>\n"
-	buf += "#include <scsi/scsi_proto.h>\n\n"
-	buf += "#include <target/target_core_base.h>\n"
-	buf += "#include <target/target_core_fabric.h>\n"
-	buf += "#include \"" + fabric_mod_name + "_base.h\"\n"
-	buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n"
-
-	buf += "static const struct target_core_fabric_ops " + fabric_mod_name + "_ops;\n\n"
-
-	buf += "static struct se_portal_group *" + fabric_mod_name + "_make_tpg(\n"
-	buf += "	struct se_wwn *wwn,\n"
-	buf += "	struct config_group *group,\n"
-	buf += "	const char *name)\n"
-	buf += "{\n"
-	buf += "	struct " + fabric_mod_name + "_" + fabric_mod_port + "*" + fabric_mod_port + " = container_of(wwn,\n"
-	buf += "			struct " + fabric_mod_name + "_" + fabric_mod_port + ", " + fabric_mod_port + "_wwn);\n\n"
-	buf += "	struct " + fabric_mod_name + "_tpg *tpg;\n"
-	buf += "	unsigned long tpgt;\n"
-	buf += "	int ret;\n\n"
-	buf += "	if (strstr(name, \"tpgt_\") != name)\n"
-	buf += "		return ERR_PTR(-EINVAL);\n"
-	buf += "	if (kstrtoul(name + 5, 10, &tpgt) || tpgt > UINT_MAX)\n"
-	buf += "		return ERR_PTR(-EINVAL);\n\n"
-	buf += "	tpg = kzalloc(sizeof(struct " + fabric_mod_name + "_tpg), GFP_KERNEL);\n"
-	buf += "	if (!tpg) {\n"
-	buf += "		printk(KERN_ERR \"Unable to allocate struct " + fabric_mod_name + "_tpg\");\n"
-	buf += "		return ERR_PTR(-ENOMEM);\n"
-	buf += "	}\n"
-	buf += "	tpg->" + fabric_mod_port + " = " + fabric_mod_port + ";\n"
-	buf += "	tpg->" + fabric_mod_port + "_tpgt = tpgt;\n\n"
-
-	if proto_ident == "FC":
-		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_FCP);\n"
-	elif proto_ident == "SAS":
-		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_SAS);\n"
-	elif proto_ident == "iSCSI":
-		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_ISCSI);\n"
-
-	buf += "	if (ret < 0) {\n"
-	buf += "		kfree(tpg);\n"
-	buf += "		return NULL;\n"
-	buf += "	}\n"
-	buf += "	return &tpg->se_tpg;\n"
-	buf += "}\n\n"
-	buf += "static void " + fabric_mod_name + "_drop_tpg(struct se_portal_group *se_tpg)\n"
-	buf += "{\n"
-	buf += "	struct " + fabric_mod_name + "_tpg *tpg = container_of(se_tpg,\n"
-	buf += "				struct " + fabric_mod_name + "_tpg, se_tpg);\n\n"
-	buf += "	core_tpg_deregister(se_tpg);\n"
-	buf += "	kfree(tpg);\n"
-	buf += "}\n\n"
-
-	buf += "static struct se_wwn *" + fabric_mod_name + "_make_" + fabric_mod_port + "(\n"
-	buf += "	struct target_fabric_configfs *tf,\n"
-	buf += "	struct config_group *group,\n"
-	buf += "	const char *name)\n"
-	buf += "{\n"
-	buf += "	struct " + fabric_mod_name + "_" + fabric_mod_port + " *" + fabric_mod_port + ";\n"
-
-	if proto_ident == "FC" or proto_ident == "SAS":
-		buf += "	u64 wwpn = 0;\n\n"
-
-	buf += "	/* if (" + fabric_mod_name + "_parse_wwn(name, &wwpn, 1) < 0)\n"
-	buf += "		return ERR_PTR(-EINVAL); */\n\n"
-	buf += "	" + fabric_mod_port + " = kzalloc(sizeof(struct " + fabric_mod_name + "_" + fabric_mod_port + "), GFP_KERNEL);\n"
-	buf += "	if (!" + fabric_mod_port + ") {\n"
-	buf += "		printk(KERN_ERR \"Unable to allocate struct " + fabric_mod_name + "_" + fabric_mod_port + "\");\n"
-	buf += "		return ERR_PTR(-ENOMEM);\n"
-	buf += "	}\n"
-
-	if proto_ident == "FC" or proto_ident == "SAS":
-		buf += "	" + fabric_mod_port + "->" + fabric_mod_port + "_wwpn = wwpn;\n"
-
-	buf += "	/* " + fabric_mod_name + "_format_wwn(&" + fabric_mod_port + "->" + fabric_mod_port + "_name[0], " + fabric_mod_name.upper() + "_NAMELEN, wwpn); */\n\n"
-	buf += "	return &" + fabric_mod_port + "->" + fabric_mod_port + "_wwn;\n"
-	buf += "}\n\n"
-	buf += "static void " + fabric_mod_name + "_drop_" + fabric_mod_port + "(struct se_wwn *wwn)\n"
-	buf += "{\n"
-	buf += "	struct " + fabric_mod_name + "_" + fabric_mod_port + " *" + fabric_mod_port + " = container_of(wwn,\n"
-	buf += "				struct " + fabric_mod_name + "_" + fabric_mod_port + ", " + fabric_mod_port + "_wwn);\n"
-	buf += "	kfree(" + fabric_mod_port + ");\n"
-	buf += "}\n\n"
-
-	buf += "static const struct target_core_fabric_ops " + fabric_mod_name + "_ops = {\n"
-	buf += "	.module				= THIS_MODULE,\n"
-	buf += "	.name				= \"" + fabric_mod_name + "\",\n"
-	buf += "	.get_fabric_name		= " + fabric_mod_name + "_get_fabric_name,\n"
-	buf += "	.tpg_get_wwn			= " + fabric_mod_name + "_get_fabric_wwn,\n"
-	buf += "	.tpg_get_tag			= " + fabric_mod_name + "_get_tag,\n"
-	buf += "	.tpg_check_demo_mode		= " + fabric_mod_name + "_check_false,\n"
-	buf += "	.tpg_check_demo_mode_cache	= " + fabric_mod_name + "_check_true,\n"
-	buf += "	.tpg_check_demo_mode_write_protect = " + fabric_mod_name + "_check_true,\n"
-	buf += "	.tpg_check_prod_mode_write_protect = " + fabric_mod_name + "_check_false,\n"
-	buf += "	.tpg_get_inst_index		= " + fabric_mod_name + "_tpg_get_inst_index,\n"
-	buf += "	.release_cmd			= " + fabric_mod_name + "_release_cmd,\n"
-	buf += "	.sess_get_index			= " + fabric_mod_name + "_sess_get_index,\n"
-	buf += "	.sess_get_initiator_sid		= NULL,\n"
-	buf += "	.write_pending			= " + fabric_mod_name + "_write_pending,\n"
-	buf += "	.set_default_node_attributes	= " + fabric_mod_name + "_set_default_node_attrs,\n"
-	buf += "	.get_cmd_state			= " + fabric_mod_name + "_get_cmd_state,\n"
-	buf += "	.queue_data_in			= " + fabric_mod_name + "_queue_data_in,\n"
-	buf += "	.queue_status			= " + fabric_mod_name + "_queue_status,\n"
-	buf += "	.queue_tm_rsp			= " + fabric_mod_name + "_queue_tm_rsp,\n"
-	buf += "	.aborted_task			= " + fabric_mod_name + "_aborted_task,\n"
-	buf += "	/*\n"
-	buf += "	 * Setup function pointers for generic logic in target_core_fabric_configfs.c\n"
-	buf += "	 */\n"
-	buf += "	.fabric_make_wwn		= " + fabric_mod_name + "_make_" + fabric_mod_port + ",\n"
-	buf += "	.fabric_drop_wwn		= " + fabric_mod_name + "_drop_" + fabric_mod_port + ",\n"
-	buf += "	.fabric_make_tpg		= " + fabric_mod_name + "_make_tpg,\n"
-	buf += "	.fabric_drop_tpg		= " + fabric_mod_name + "_drop_tpg,\n"
-	buf += "};\n\n"
-
-	buf += "static int __init " + fabric_mod_name + "_init(void)\n"
-	buf += "{\n"
-	buf += "	return target_register_template(&" + fabric_mod_name + "_ops);\n"
-	buf += "};\n\n"
-
-	buf += "static void __exit " + fabric_mod_name + "_exit(void)\n"
-	buf += "{\n"
-	buf += "	target_unregister_template(&" + fabric_mod_name + "_ops);\n"
-	buf += "};\n\n"
-
-	buf += "MODULE_DESCRIPTION(\"" + fabric_mod_name.upper() + " series fabric driver\");\n"
-	buf += "MODULE_LICENSE(\"GPL\");\n"
-	buf += "module_init(" + fabric_mod_name + "_init);\n"
-	buf += "module_exit(" + fabric_mod_name + "_exit);\n"
-
-	ret = p.write(buf)
-	if ret:
-		tcm_mod_err("Unable to write f: " + f)
-
-	p.close()
-
-	return
-
-def tcm_mod_scan_fabric_ops(tcm_dir):
-
-	fabric_ops_api = tcm_dir + "include/target/target_core_fabric.h"
-
-	print "Using tcm_mod_scan_fabric_ops: " + fabric_ops_api
-	process_fo = 0;
-
-	p = open(fabric_ops_api, 'r')
-
-	line = p.readline()
-	while line:
-		if process_fo == 0 and re.search('struct target_core_fabric_ops {', line):
-			line = p.readline()
-			continue
-
-		if process_fo == 0:
-			process_fo = 1;
-			line = p.readline()
-			# Search for function pointer
-			if not re.search('\(\*', line):
-				continue
-
-			fabric_ops.append(line.rstrip())
-			continue
-
-		line = p.readline()
-		# Search for function pointer
-		if not re.search('\(\*', line):
-			continue
-
-		fabric_ops.append(line.rstrip())
-
-	p.close()
-	return
-
-def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
-	buf = ""
-	bufi = ""
-
-	f = fabric_mod_dir_var + "/" + fabric_mod_name + "_fabric.c"
-	print "Writing file: " + f
-
-	p = open(f, 'w')
-	if not p:
-		tcm_mod_err("Unable to open file: " + f)
-
-	fi = fabric_mod_dir_var + "/" + fabric_mod_name + "_fabric.h"
-	print "Writing file: " + fi
-
-	pi = open(fi, 'w')
-	if not pi:
-		tcm_mod_err("Unable to open file: " + fi)
-
-	buf = "#include <linux/slab.h>\n"
-	buf += "#include <linux/kthread.h>\n"
-	buf += "#include <linux/types.h>\n"
-	buf += "#include <linux/list.h>\n"
-	buf += "#include <linux/types.h>\n"
-	buf += "#include <linux/string.h>\n"
-	buf += "#include <linux/ctype.h>\n"
-	buf += "#include <asm/unaligned.h>\n"
-	buf += "#include <scsi/scsi_common.h>\n"
-	buf += "#include <scsi/scsi_proto.h>\n"
-	buf += "#include <target/target_core_base.h>\n"
-	buf += "#include <target/target_core_fabric.h>\n"
-	buf += "#include \"" + fabric_mod_name + "_base.h\"\n"
-	buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n"
-
-	buf += "int " + fabric_mod_name + "_check_true(struct se_portal_group *se_tpg)\n"
-	buf += "{\n"
-	buf += "	return 1;\n"
-	buf += "}\n\n"
-	bufi += "int " + fabric_mod_name + "_check_true(struct se_portal_group *);\n"
-
-	buf += "int " + fabric_mod_name + "_check_false(struct se_portal_group *se_tpg)\n"
-	buf += "{\n"
-	buf += "	return 0;\n"
-	buf += "}\n\n"
-	bufi += "int " + fabric_mod_name + "_check_false(struct se_portal_group *);\n"
-
-	total_fabric_ops = len(fabric_ops)
-	i = 0
-
-	while i < total_fabric_ops:
-		fo = fabric_ops[i]
-		i += 1
-#		print "fabric_ops: " + fo
-
-		if re.search('get_fabric_name', fo):
-			buf += "char *" + fabric_mod_name + "_get_fabric_name(void)\n"
-			buf += "{\n"
-			buf += "	return \"" + fabric_mod_name + "\";\n"
-			buf += "}\n\n"
-			bufi += "char *" + fabric_mod_name + "_get_fabric_name(void);\n"
-			continue
-
-		if re.search('get_wwn', fo):
-			buf += "char *" + fabric_mod_name + "_get_fabric_wwn(struct se_portal_group *se_tpg)\n"
-			buf += "{\n"
-			buf += "	struct " + fabric_mod_name + "_tpg *tpg = container_of(se_tpg,\n"
-			buf += "				struct " + fabric_mod_name + "_tpg, se_tpg);\n"
-			buf += "	struct " + fabric_mod_name + "_" + fabric_mod_port + " *" + fabric_mod_port + " = tpg->" + fabric_mod_port + ";\n\n"
-			buf += "	return &" + fabric_mod_port + "->" + fabric_mod_port + "_name[0];\n"
-			buf += "}\n\n"
-			bufi += "char *" + fabric_mod_name + "_get_fabric_wwn(struct se_portal_group *);\n"
-
-		if re.search('get_tag', fo):
-			buf += "u16 " + fabric_mod_name + "_get_tag(struct se_portal_group *se_tpg)\n"
-			buf += "{\n"
-			buf += "	struct " + fabric_mod_name + "_tpg *tpg = container_of(se_tpg,\n"
-			buf += "				struct " + fabric_mod_name + "_tpg, se_tpg);\n"
-			buf += "	return tpg->" + fabric_mod_port + "_tpgt;\n"
-			buf += "}\n\n"
-			bufi += "u16 " + fabric_mod_name + "_get_tag(struct se_portal_group *);\n"
-
-		if re.search('tpg_get_inst_index\)\(', fo):
-			buf += "u32 " + fabric_mod_name + "_tpg_get_inst_index(struct se_portal_group *se_tpg)\n"
-			buf += "{\n"
-			buf += "	return 1;\n"
-			buf += "}\n\n"
-			bufi += "u32 " + fabric_mod_name + "_tpg_get_inst_index(struct se_portal_group *);\n"
-
-		if re.search('\*release_cmd\)\(', fo):
-			buf += "void " + fabric_mod_name + "_release_cmd(struct se_cmd *se_cmd)\n"
-			buf += "{\n"
-			buf += "	return;\n"
-			buf += "}\n\n"
-			bufi += "void " + fabric_mod_name + "_release_cmd(struct se_cmd *);\n"
-
-		if re.search('sess_get_index\)\(', fo):
-			buf += "u32 " + fabric_mod_name + "_sess_get_index(struct se_session *se_sess)\n"
-			buf += "{\n"
-			buf += "	return 0;\n"
-			buf += "}\n\n"
-			bufi += "u32 " + fabric_mod_name + "_sess_get_index(struct se_session *);\n"
-
-		if re.search('write_pending\)\(', fo):
-			buf += "int " + fabric_mod_name + "_write_pending(struct se_cmd *se_cmd)\n"
-			buf += "{\n"
-			buf += "	return 0;\n"
-			buf += "}\n\n"
-			bufi += "int " + fabric_mod_name + "_write_pending(struct se_cmd *);\n"
-
-		if re.search('set_default_node_attributes\)\(', fo):
-			buf += "void " + fabric_mod_name + "_set_default_node_attrs(struct se_node_acl *nacl)\n"
-			buf += "{\n"
-			buf += "	return;\n"
-			buf += "}\n\n"
-			bufi += "void " + fabric_mod_name + "_set_default_node_attrs(struct se_node_acl *);\n"
-
-		if re.search('get_cmd_state\)\(', fo):
-			buf += "int " + fabric_mod_name + "_get_cmd_state(struct se_cmd *se_cmd)\n"
-			buf += "{\n"
-			buf += "	return 0;\n"
-			buf += "}\n\n"
-			bufi += "int " + fabric_mod_name + "_get_cmd_state(struct se_cmd *);\n"
-
-		if re.search('queue_data_in\)\(', fo):
-			buf += "int " + fabric_mod_name + "_queue_data_in(struct se_cmd *se_cmd)\n"
-			buf += "{\n"
-			buf += "	return 0;\n"
-			buf += "}\n\n"
-			bufi += "int " + fabric_mod_name + "_queue_data_in(struct se_cmd *);\n"
-
-		if re.search('queue_status\)\(', fo):
-			buf += "int " + fabric_mod_name + "_queue_status(struct se_cmd *se_cmd)\n"
-			buf += "{\n"
-			buf += "	return 0;\n"
-			buf += "}\n\n"
-			bufi += "int " + fabric_mod_name + "_queue_status(struct se_cmd *);\n"
-
-		if re.search('queue_tm_rsp\)\(', fo):
-			buf += "void " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *se_cmd)\n"
-			buf += "{\n"
-			buf += "	return;\n"
-			buf += "}\n\n"
-			bufi += "void " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *);\n"
-
-		if re.search('aborted_task\)\(', fo):
-			buf += "void " + fabric_mod_name + "_aborted_task(struct se_cmd *se_cmd)\n"
-			buf += "{\n"
-			buf += "	return;\n"
-			buf += "}\n\n"
-			bufi += "void " + fabric_mod_name + "_aborted_task(struct se_cmd *);\n"
-
-	ret = p.write(buf)
-	if ret:
-		tcm_mod_err("Unable to write f: " + f)
-
-	p.close()
-
-	ret = pi.write(bufi)
-	if ret:
-		tcm_mod_err("Unable to write fi: " + fi)
-
-	pi.close()
-	return
-
-def tcm_mod_build_kbuild(fabric_mod_dir_var, fabric_mod_name):
-
-	buf = ""
-	f = fabric_mod_dir_var + "/Makefile"
-	print "Writing file: " + f
-
-	p = open(f, 'w')
-	if not p:
-		tcm_mod_err("Unable to open file: " + f)
-
-	buf += fabric_mod_name + "-objs			:= " + fabric_mod_name + "_fabric.o \\\n"
-	buf += "					   " + fabric_mod_name + "_configfs.o\n"
-	buf += "obj-$(CONFIG_" + fabric_mod_name.upper() + ")		+= " + fabric_mod_name + ".o\n"
-
-	ret = p.write(buf)
-	if ret:
-		tcm_mod_err("Unable to write f: " + f)
-
-	p.close()
-	return
-
-def tcm_mod_build_kconfig(fabric_mod_dir_var, fabric_mod_name):
-
-	buf = ""
-	f = fabric_mod_dir_var + "/Kconfig"
-	print "Writing file: " + f
-
-	p = open(f, 'w')
-	if not p:
-		tcm_mod_err("Unable to open file: " + f)
-
-	buf = "config " + fabric_mod_name.upper() + "\n"
-	buf += "	tristate \"" + fabric_mod_name.upper() + " fabric module\"\n"
-	buf += "	depends on TARGET_CORE && CONFIGFS_FS\n"
-	buf += "	default n\n"
-	buf += "	help\n"
-	buf += "	  Say Y here to enable the " + fabric_mod_name.upper() + " fabric module\n"
-
-	ret = p.write(buf)
-	if ret:
-		tcm_mod_err("Unable to write f: " + f)
-
-	p.close()
-	return
-
-def tcm_mod_add_kbuild(tcm_dir, fabric_mod_name):
-	buf = "obj-$(CONFIG_" + fabric_mod_name.upper() + ")	+= " + fabric_mod_name.lower() + "/\n"
-	kbuild = tcm_dir + "/drivers/target/Makefile"
-
-	f = open(kbuild, 'a')
-	f.write(buf)
-	f.close()
-	return
-
-def tcm_mod_add_kconfig(tcm_dir, fabric_mod_name):
-	buf = "source \"drivers/target/" + fabric_mod_name.lower() + "/Kconfig\"\n"
-	kconfig = tcm_dir + "/drivers/target/Kconfig"
-
-	f = open(kconfig, 'a')
-	f.write(buf)
-	f.close()
-	return
-
-def main(modname, proto_ident):
-#	proto_ident = "FC"
-#	proto_ident = "SAS"
-#	proto_ident = "iSCSI"
-
-	tcm_dir = os.getcwd();
-	tcm_dir += "/../../"
-	print "tcm_dir: " + tcm_dir
-	fabric_mod_name = modname
-	fabric_mod_dir = tcm_dir + "drivers/target/" + fabric_mod_name
-	print "Set fabric_mod_name: " + fabric_mod_name
-	print "Set fabric_mod_dir: " + fabric_mod_dir
-	print "Using proto_ident: " + proto_ident
-
-	if proto_ident != "FC" and proto_ident != "SAS" and proto_ident != "iSCSI":
-		print "Unsupported proto_ident: " + proto_ident
-		sys.exit(1)
-
-	ret = tcm_mod_create_module_subdir(fabric_mod_dir)
-	if ret:
-		print "tcm_mod_create_module_subdir() failed because module already exists!"
-		sys.exit(1)
-
-	tcm_mod_build_base_includes(proto_ident, fabric_mod_dir, fabric_mod_name)
-	tcm_mod_scan_fabric_ops(tcm_dir)
-	tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir, fabric_mod_name)
-	tcm_mod_build_configfs(proto_ident, fabric_mod_dir, fabric_mod_name)
-	tcm_mod_build_kbuild(fabric_mod_dir, fabric_mod_name)
-	tcm_mod_build_kconfig(fabric_mod_dir, fabric_mod_name)
-
-	input = raw_input("Would you like to add " + fabric_mod_name + " to drivers/target/Makefile..? [yes,no]: ")
-	if input == "yes" or input == "y":
-		tcm_mod_add_kbuild(tcm_dir, fabric_mod_name)
-
-	input = raw_input("Would you like to add " + fabric_mod_name + " to drivers/target/Kconfig..? [yes,no]: ")
-	if input == "yes" or input == "y":
-		tcm_mod_add_kconfig(tcm_dir, fabric_mod_name)
-
-	return
-
-parser = optparse.OptionParser()
-parser.add_option('-m', '--modulename', help='Module name', dest='modname',
-		action='store', nargs=1, type='string')
-parser.add_option('-p', '--protoident', help='Protocol Ident', dest='protoident',
-		action='store', nargs=1, type='string')
-
-(opts, args) = parser.parse_args()
-
-mandatories = ['modname', 'protoident']
-for m in mandatories:
-	if not opts.__dict__[m]:
-		print "mandatory option is missing\n"
-		parser.print_help()
-		exit(-1)
-
-if __name__ == "__main__":
-
-	main(str(opts.modname), opts.protoident)
diff --git a/Documentation/tools/rtla/common_options.rst b/Documentation/tools/rtla/common_options.rst
index af76df6205d4a..aeb91ff3bd68c 100644
--- a/Documentation/tools/rtla/common_options.rst
+++ b/Documentation/tools/rtla/common_options.rst
@@ -2,6 +2,10 @@
 
         Set the osnoise tracer to run the sample threads in the cpu-list.
 
+**-H**, **--house-keeping** *cpu-list*
+
+        Run rtla control threads only on the given cpu-list.
+
 **-d**, **--duration** *time[s|m|h|d]*
 
         Set the duration of the session.
@@ -42,6 +46,10 @@
         - *f:prio* - use SCHED_FIFO with *prio*;
         - *d:runtime[us|ms|s]:period[us|ms|s]* - use SCHED_DEADLINE with *runtime* and *period* in nanoseconds.
 
+**-C**, **--cgroup**\[*=cgroup*]
+
+        Set a *cgroup* to the tracer's threads. If the **-C** option is passed without arguments, the tracer's thread will inherit **rtla**'s *cgroup*. Otherwise, the threads will be placed on the *cgroup* passed to the option.
+
 **-h**, **--help**
 
         Print help menu.
diff --git a/Documentation/tools/rtla/common_timerlat_aa.rst b/Documentation/tools/rtla/common_timerlat_aa.rst
index 795b9fbcbc6de..077029e6b289e 100644
--- a/Documentation/tools/rtla/common_timerlat_aa.rst
+++ b/Documentation/tools/rtla/common_timerlat_aa.rst
@@ -5,10 +5,3 @@
 **--no-aa**
 
         disable auto-analysis, reducing rtla timerlat cpu usage
-
-**--aa-only** *us*
-
-        Set stop tracing conditions and run without collecting and displaying statistics.
-        Print the auto-analysis if the system hits the stop tracing condition. This option
-        is useful to reduce rtla timerlat CPU, enabling the debug without the overhead of
-        collecting the statistics.
diff --git a/Documentation/tools/rtla/common_timerlat_options.rst b/Documentation/tools/rtla/common_timerlat_options.rst
index bacdea6de7a34..88506b397c2dd 100644
--- a/Documentation/tools/rtla/common_timerlat_options.rst
+++ b/Documentation/tools/rtla/common_timerlat_options.rst
@@ -26,3 +26,10 @@
         Set the /dev/cpu_dma_latency to *us*, aiming to bound exit from idle latencies.
         *cyclictest* sets this value to *0* by default, use **--dma-latency** *0* to have
         similar results.
+
+**-u**, **--user-threads**
+
+        Set timerlat to run without a workload, and then dispatches user-space workloads
+        to wait on the timerlat_fd. Once the workload is awakes, it goes to sleep again
+        adding so the measurement for the kernel-to-user and user-to-kernel to the tracer
+        output.
diff --git a/Documentation/tools/rtla/rtla-timerlat-hist.rst b/Documentation/tools/rtla/rtla-timerlat-hist.rst
index 6bf7f0ca45564..057db78d4095a 100644
--- a/Documentation/tools/rtla/rtla-timerlat-hist.rst
+++ b/Documentation/tools/rtla/rtla-timerlat-hist.rst
@@ -29,15 +29,18 @@ OPTIONS
 
 .. include:: common_options.rst
 
+.. include:: common_timerlat_aa.rst
+
 EXAMPLE
 =======
 In the example below, **rtla timerlat hist** is set to run for *10* minutes,
 in the cpus *0-4*, *skipping zero* only lines. Moreover, **rtla timerlat
 hist** will change the priority of the *timerlat* threads to run under
 *SCHED_DEADLINE* priority, with a *10us* runtime every *1ms* period. The
-*1ms* period is also passed to the *timerlat* tracer::
+*1ms* period is also passed to the *timerlat* tracer. Auto-analysis is disabled
+to reduce overhead ::
 
-  [root@alien ~]# timerlat hist -d 10m -c 0-4 -P d:100us:1ms -p 1ms
+  [root@alien ~]# timerlat hist -d 10m -c 0-4 -P d:100us:1ms -p 1ms --no-aa
   # RTLA timerlat histogram
   # Time unit is microseconds (us)
   # Duration:   0 00:10:00
diff --git a/Documentation/tools/rtla/rtla-timerlat-top.rst b/Documentation/tools/rtla/rtla-timerlat-top.rst
index 73799c1150adc..1b7cf4e3eafe7 100644
--- a/Documentation/tools/rtla/rtla-timerlat-top.rst
+++ b/Documentation/tools/rtla/rtla-timerlat-top.rst
@@ -32,6 +32,13 @@ OPTIONS
 
 .. include:: common_timerlat_aa.rst
 
+**--aa-only** *us*
+
+        Set stop tracing conditions and run without collecting and displaying statistics.
+        Print the auto-analysis if the system hits the stop tracing condition. This option
+        is useful to reduce rtla timerlat CPU, enabling the debug without the overhead of
+        collecting the statistics.
+
 EXAMPLE
 =======
 
diff --git a/Documentation/trace/coresight/coresight-dummy.rst b/Documentation/trace/coresight/coresight-dummy.rst
new file mode 100644
index 0000000000000..eff7c553ee6ce
--- /dev/null
+++ b/Documentation/trace/coresight/coresight-dummy.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+Coresight Dummy Trace Module
+=============================
+
+    :Author:   Hao Zhang <quic_hazha@quicinc.com>
+    :Date:     June 2023
+
+Introduction
+------------
+
+The Coresight dummy trace module is for the specific devices that kernel don't
+have permission to access or configure, e.g., CoreSight TPDMs on Qualcomm
+platforms. For these devices, a dummy driver is needed to register them as
+Coresight devices. The module may also be used to define components that may
+not have any programming interfaces, so that paths can be created in the driver.
+It provides Coresight API for operations on dummy devices, such as enabling and
+disabling them. It also provides the Coresight dummy sink/source paths for
+debugging.
+
+Config details
+--------------
+
+There are two types of nodes, dummy sink and dummy source. These nodes
+are available at ``/sys/bus/coresight/devices``.
+
+Example output::
+
+    $ ls -l /sys/bus/coresight/devices | grep dummy
+    dummy_sink0 -> ../../../devices/platform/soc@0/soc@0:sink/dummy_sink0
+    dummy_source0 -> ../../../devices/platform/soc@0/soc@0:source/dummy_source0
diff --git a/Documentation/trace/fprobetrace.rst b/Documentation/trace/fprobetrace.rst
new file mode 100644
index 0000000000000..7297f94784594
--- /dev/null
+++ b/Documentation/trace/fprobetrace.rst
@@ -0,0 +1,188 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+Fprobe-based Event Tracing
+==========================
+
+.. Author: Masami Hiramatsu <mhiramat@kernel.org>
+
+Overview
+--------
+
+Fprobe event is similar to the kprobe event, but limited to probe on
+the function entry and exit only. It is good enough for many use cases
+which only traces some specific functions.
+
+This document also covers tracepoint probe events (tprobe) since this
+is also works only on the tracepoint entry. User can trace a part of
+tracepoint argument, or the tracepoint without trace-event, which is
+not exposed on tracefs.
+
+As same as other dynamic events, fprobe events and tracepoint probe
+events are defined via `dynamic_events` interface file on tracefs.
+
+Synopsis of fprobe-events
+-------------------------
+::
+
+  f[:[GRP1/][EVENT1]] SYM [FETCHARGS]                       : Probe on function entry
+  f[MAXACTIVE][:[GRP1/][EVENT1]] SYM%return [FETCHARGS]     : Probe on function exit
+  t[:[GRP2/][EVENT2]] TRACEPOINT [FETCHARGS]                : Probe on tracepoint
+
+ GRP1           : Group name for fprobe. If omitted, use "fprobes" for it.
+ GRP2           : Group name for tprobe. If omitted, use "tracepoints" for it.
+ EVENT1         : Event name for fprobe. If omitted, the event name is
+                  "SYM__entry" or "SYM__exit".
+ EVENT2         : Event name for tprobe. If omitted, the event name is
+                  the same as "TRACEPOINT", but if the "TRACEPOINT" starts
+                  with a digit character, "_TRACEPOINT" is used.
+ MAXACTIVE      : Maximum number of instances of the specified function that
+                  can be probed simultaneously, or 0 for the default value
+                  as defined in Documentation/trace/fprobe.rst
+
+ FETCHARGS      : Arguments. Each probe can have up to 128 args.
+  ARG           : Fetch "ARG" function argument using BTF (only for function
+                  entry or tracepoint.) (\*1)
+  @ADDR         : Fetch memory at ADDR (ADDR should be in kernel)
+  @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
+  $stackN       : Fetch Nth entry of stack (N >= 0)
+  $stack        : Fetch stack address.
+  $argN         : Fetch the Nth function argument. (N >= 1) (\*2)
+  $retval       : Fetch return value.(\*3)
+  $comm         : Fetch current task comm.
+  +|-[u]OFFS(FETCHARG) : Fetch memory at FETCHARG +|- OFFS address.(\*4)(\*5)
+  \IMM          : Store an immediate value to the argument.
+  NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
+  FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
+                  (u8/u16/u32/u64/s8/s16/s32/s64), hexadecimal types
+                  (x8/x16/x32/x64), "char", "string", "ustring", "symbol", "symstr"
+                  and bitfield are supported.
+
+  (\*1) This is available only when BTF is enabled.
+  (\*2) only for the probe on function entry (offs == 0).
+  (\*3) only for return probe.
+  (\*4) this is useful for fetching a field of data structures.
+  (\*5) "u" means user-space dereference.
+
+For the details of TYPE, see :ref:`kprobetrace documentation <kprobetrace_types>`.
+
+BTF arguments
+-------------
+BTF (BPF Type Format) argument allows user to trace function and tracepoint
+parameters by its name instead of ``$argN``. This feature is available if the
+kernel is configured with CONFIG_BPF_SYSCALL and CONFIG_DEBUG_INFO_BTF.
+If user only specify the BTF argument, the event's argument name is also
+automatically set by the given name. ::
+
+ # echo 'f:myprobe vfs_read count pos' >> dynamic_events
+ # cat dynamic_events
+ f:fprobes/myprobe vfs_read count=count pos=pos
+
+It also chooses the fetch type from BTF information. For example, in the above
+example, the ``count`` is unsigned long, and the ``pos`` is a pointer. Thus, both
+are converted to 64bit unsigned long, but only ``pos`` has "%Lx" print-format as
+below ::
+
+ # cat events/fprobes/myprobe/format
+ name: myprobe
+ ID: 1313
+ format:
+	field:unsigned short common_type;	offset:0;	size:2;	signed:0;
+	field:unsigned char common_flags;	offset:2;	size:1;	signed:0;
+	field:unsigned char common_preempt_count;	offset:3;	size:1;	signed:0;
+	field:int common_pid;	offset:4;	size:4;	signed:1;
+
+	field:unsigned long __probe_ip;	offset:8;	size:8;	signed:0;
+	field:u64 count;	offset:16;	size:8;	signed:0;
+	field:u64 pos;	offset:24;	size:8;	signed:0;
+
+ print fmt: "(%lx) count=%Lu pos=0x%Lx", REC->__probe_ip, REC->count, REC->pos
+
+If user unsures the name of arguments, ``$arg*`` will be helpful. The ``$arg*``
+is expanded to all function arguments of the function or the tracepoint. ::
+
+ # echo 'f:myprobe vfs_read $arg*' >> dynamic_events
+ # cat dynamic_events
+ f:fprobes/myprobe vfs_read file=file buf=buf count=count pos=pos
+
+BTF also affects the ``$retval``. If user doesn't set any type, the retval type is
+automatically picked from the BTF. If the function returns ``void``, ``$retval``
+is rejected.
+
+Usage examples
+--------------
+Here is an example to add fprobe events on ``vfs_read()`` function entry
+and exit, with BTF arguments.
+::
+
+  # echo 'f vfs_read $arg*' >> dynamic_events
+  # echo 'f vfs_read%return $retval' >> dynamic_events
+  # cat dynamic_events
+ f:fprobes/vfs_read__entry vfs_read file=file buf=buf count=count pos=pos
+ f:fprobes/vfs_read__exit vfs_read%return arg1=$retval
+  # echo 1 > events/fprobes/enable
+  # head -n 20 trace | tail
+ #           TASK-PID     CPU#  |||||  TIMESTAMP  FUNCTION
+ #              | |         |   |||||     |         |
+               sh-70      [000] ...1.   335.883195: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c6879 count=1 pos=0xffffc900005aff08
+               sh-70      [000] .....   335.883208: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1
+               sh-70      [000] ...1.   335.883220: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c6879 count=1 pos=0xffffc900005aff08
+               sh-70      [000] .....   335.883224: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1
+               sh-70      [000] ...1.   335.883232: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c687a count=1 pos=0xffffc900005aff08
+               sh-70      [000] .....   335.883237: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1
+               sh-70      [000] ...1.   336.050329: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c6879 count=1 pos=0xffffc900005aff08
+               sh-70      [000] .....   336.050343: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1
+
+You can see all function arguments and return values are recorded as signed int.
+
+Also, here is an example of tracepoint events on ``sched_switch`` tracepoint.
+To compare the result, this also enables the ``sched_switch`` traceevent too.
+::
+
+  # echo 't sched_switch $arg*' >> dynamic_events
+  # echo 1 > events/sched/sched_switch/enable
+  # echo 1 > events/tracepoints/sched_switch/enable
+  # echo > trace
+  # head -n 20 trace | tail
+ #           TASK-PID     CPU#  |||||  TIMESTAMP  FUNCTION
+ #              | |         |   |||||     |         |
+               sh-70      [000] d..2.  3912.083993: sched_switch: prev_comm=sh prev_pid=70 prev_prio=120 prev_state=S ==> next_comm=swapper/0 next_pid=0 next_prio=120
+               sh-70      [000] d..3.  3912.083995: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffff88800664e100 next=0xffffffff828229c0 prev_state=1
+           <idle>-0       [000] d..2.  3912.084183: sched_switch: prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=rcu_preempt next_pid=16 next_prio=120
+           <idle>-0       [000] d..3.  3912.084184: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffffffff828229c0 next=0xffff888004208000 prev_state=0
+      rcu_preempt-16      [000] d..2.  3912.084196: sched_switch: prev_comm=rcu_preempt prev_pid=16 prev_prio=120 prev_state=I ==> next_comm=swapper/0 next_pid=0 next_prio=120
+      rcu_preempt-16      [000] d..3.  3912.084196: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffff888004208000 next=0xffffffff828229c0 prev_state=1026
+           <idle>-0       [000] d..2.  3912.085191: sched_switch: prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=rcu_preempt next_pid=16 next_prio=120
+           <idle>-0       [000] d..3.  3912.085191: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffffffff828229c0 next=0xffff888004208000 prev_state=0
+
+As you can see, the ``sched_switch`` trace-event shows *cooked* parameters, on
+the other hand, the ``sched_switch`` tracepoint probe event shows *raw*
+parameters. This means you can access any field values in the task
+structure pointed by the ``prev`` and ``next`` arguments.
+
+For example, usually ``task_struct::start_time`` is not traced, but with this
+traceprobe event, you can trace it as below.
+::
+
+  # echo 't sched_switch comm=+1896(next):string start_time=+1728(next):u64' > dynamic_events
+  # head -n 20 trace | tail
+ #           TASK-PID     CPU#  |||||  TIMESTAMP  FUNCTION
+ #              | |         |   |||||     |         |
+               sh-70      [000] d..3.  5606.686577: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="rcu_preempt" usage=1 start_time=245000000
+      rcu_preempt-16      [000] d..3.  5606.686602: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="sh" usage=1 start_time=1596095526
+               sh-70      [000] d..3.  5606.686637: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0
+           <idle>-0       [000] d..3.  5606.687190: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="rcu_preempt" usage=1 start_time=245000000
+      rcu_preempt-16      [000] d..3.  5606.687202: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0
+           <idle>-0       [000] d..3.  5606.690317: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="kworker/0:1" usage=1 start_time=137000000
+      kworker/0:1-14      [000] d..3.  5606.690339: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0
+           <idle>-0       [000] d..3.  5606.692368: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="kworker/0:1" usage=1 start_time=137000000
+
+Currently, to find the offset of a specific field in the data structure,
+you need to build kernel with debuginfo and run `perf probe` command with
+`-D` option. e.g.
+::
+
+ # perf probe -D "__probestub_sched_switch next->comm:string next->start_time"
+ p:probe/__probestub_sched_switch __probestub_sched_switch+0 comm=+1896(%cx):string start_time=+1728(%cx):u64
+
+And replace the ``%cx`` with the ``next``.
diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst
index 027437b745a0c..f606c5bd1c0d0 100644
--- a/Documentation/trace/ftrace.rst
+++ b/Documentation/trace/ftrace.rst
@@ -324,6 +324,12 @@ of ftrace. Here is a list of some of the key files:
 	"set_graph_function", or "set_graph_notrace".
 	(See the section "dynamic ftrace" below for more details.)
 
+  available_filter_functions_addrs:
+
+	Similar to available_filter_functions, but with address displayed
+	for each function. The displayed address is the patch-site address
+	and can differ from /proc/kallsyms address.
+
   dyn_ftrace_total_info:
 
 	This file is for debugging purposes. The number of functions that
@@ -1359,6 +1365,19 @@ Options for function_graph tracer:
 	only a closing curly bracket "}" is displayed for
 	the return of a function.
 
+  funcgraph-retval
+	When set, the return value of each traced function
+	will be printed after an equal sign "=". By default
+	this is off.
+
+  funcgraph-retval-hex
+	When set, the return value will always be printed
+	in hexadecimal format. If the option is not set and
+	the return value is an error code, it will be printed
+	in signed decimal format; otherwise it will also be
+	printed in hexadecimal format. By default, this option
+	is off.
+
   sleep-time
 	When running function graph tracer, to include
 	the time a task schedules out in its function.
@@ -2704,6 +2723,119 @@ It is default disabled.
     0)   1.757 us    |        } /* kmem_cache_free() */
     0)   2.861 us    |      } /* putname() */
 
+The return value of each traced function can be displayed after
+an equal sign "=". When encountering system call failures, it
+can be verfy helpful to quickly locate the function that first
+returns an error code.
+
+	- hide: echo nofuncgraph-retval > trace_options
+	- show: echo funcgraph-retval > trace_options
+
+  Example with funcgraph-retval::
+
+    1)               |    cgroup_migrate() {
+    1)   0.651 us    |      cgroup_migrate_add_task(); /* = 0xffff93fcfd346c00 */
+    1)               |      cgroup_migrate_execute() {
+    1)               |        cpu_cgroup_can_attach() {
+    1)               |          cgroup_taskset_first() {
+    1)   0.732 us    |            cgroup_taskset_next(); /* = 0xffff93fc8fb20000 */
+    1)   1.232 us    |          } /* cgroup_taskset_first = 0xffff93fc8fb20000 */
+    1)   0.380 us    |          sched_rt_can_attach(); /* = 0x0 */
+    1)   2.335 us    |        } /* cpu_cgroup_can_attach = -22 */
+    1)   4.369 us    |      } /* cgroup_migrate_execute = -22 */
+    1)   7.143 us    |    } /* cgroup_migrate = -22 */
+
+The above example shows that the function cpu_cgroup_can_attach
+returned the error code -22 firstly, then we can read the code
+of this function to get the root cause.
+
+When the option funcgraph-retval-hex is not set, the return value can
+be displayed in a smart way. Specifically, if it is an error code,
+it will be printed in signed decimal format, otherwise it will
+printed in hexadecimal format.
+
+	- smart: echo nofuncgraph-retval-hex > trace_options
+	- hexadecimal: echo funcgraph-retval-hex > trace_options
+
+  Example with funcgraph-retval-hex::
+
+    1)               |      cgroup_migrate() {
+    1)   0.651 us    |        cgroup_migrate_add_task(); /* = 0xffff93fcfd346c00 */
+    1)               |        cgroup_migrate_execute() {
+    1)               |          cpu_cgroup_can_attach() {
+    1)               |            cgroup_taskset_first() {
+    1)   0.732 us    |              cgroup_taskset_next(); /* = 0xffff93fc8fb20000 */
+    1)   1.232 us    |            } /* cgroup_taskset_first = 0xffff93fc8fb20000 */
+    1)   0.380 us    |            sched_rt_can_attach(); /* = 0x0 */
+    1)   2.335 us    |          } /* cpu_cgroup_can_attach = 0xffffffea */
+    1)   4.369 us    |        } /* cgroup_migrate_execute = 0xffffffea */
+    1)   7.143 us    |      } /* cgroup_migrate = 0xffffffea */
+
+At present, there are some limitations when using the funcgraph-retval
+option, and these limitations will be eliminated in the future:
+
+- Even if the function return type is void, a return value will still
+  be printed, and you can just ignore it.
+
+- Even if return values are stored in multiple registers, only the
+  value contained in the first register will be recorded and printed.
+  To illustrate, in the x86 architecture, eax and edx are used to store
+  a 64-bit return value, with the lower 32 bits saved in eax and the
+  upper 32 bits saved in edx. However, only the value stored in eax
+  will be recorded and printed.
+
+- In certain procedure call standards, such as arm64's AAPCS64, when a
+  type is smaller than a GPR, it is the responsibility of the consumer
+  to perform the narrowing, and the upper bits may contain UNKNOWN values.
+  Therefore, it is advisable to check the code for such cases. For instance,
+  when using a u8 in a 64-bit GPR, bits [63:8] may contain arbitrary values,
+  especially when larger types are truncated, whether explicitly or implicitly.
+  Here are some specific cases to illustrate this point:
+
+  **Case One**:
+
+  The function narrow_to_u8 is defined as follows::
+
+	u8 narrow_to_u8(u64 val)
+	{
+		// implicitly truncated
+		return val;
+	}
+
+  It may be compiled to::
+
+	narrow_to_u8:
+		< ... ftrace instrumentation ... >
+		RET
+
+  If you pass 0x123456789abcdef to this function and want to narrow it,
+  it may be recorded as 0x123456789abcdef instead of 0xef.
+
+  **Case Two**:
+
+  The function error_if_not_4g_aligned is defined as follows::
+
+	int error_if_not_4g_aligned(u64 val)
+	{
+		if (val & GENMASK(31, 0))
+			return -EINVAL;
+
+		return 0;
+	}
+
+  It could be compiled to::
+
+	error_if_not_4g_aligned:
+		CBNZ    w0, .Lnot_aligned
+		RET			// bits [31:0] are zero, bits
+					// [63:32] are UNKNOWN
+	.Lnot_aligned:
+		MOV    x0, #-EINVAL
+		RET
+
+  When passing 0x2_0000_0000 to it, the return value may be recorded as
+  0x2_0000_0000 instead of 0.
+
 You can put some comments on specific functions by using
 trace_printk() For example, if you want to put a comment inside
 the __might_sleep() function, you just have to include
diff --git a/Documentation/trace/hisi-ptt.rst b/Documentation/trace/hisi-ptt.rst
index 4f87d8e21065e..989255eb56221 100644
--- a/Documentation/trace/hisi-ptt.rst
+++ b/Documentation/trace/hisi-ptt.rst
@@ -148,14 +148,20 @@ For example, if the desired filter is Endpoint function 0000:01:00.1 the filter
 value will be 0x00101. If the desired filter is Root Port 0000:00:10.0 then
 then filter value is calculated as 0x80001.
 
+The driver also presents every supported Root Port and Requester filter through
+sysfs. Each filter will be an individual file with name of its related PCIe
+device name (domain:bus:device.function). The files of Root Port filters are
+under $(PTT PMU dir)/root_port_filters and files of Requester filters
+are under $(PTT PMU dir)/requester_filters.
+
 Note that multiple Root Ports can be specified at one time, but only one
 Endpoint function can be specified in one trace. Specifying both Root Port
 and function at the same time is not supported. Driver maintains a list of
 available filters and will check the invalid inputs.
 
-Currently the available filters are detected in driver's probe. If the supported
-devices are removed/added after probe, you may need to reload the driver to update
-the filters.
+The available filters will be dynamically updated, which means you will always
+get correct filter information when hotplug events happen, or when you manually
+remove/rescan the devices.
 
 2. Type
 -------
diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst
index ea25a9220f926..5092d6c13af5e 100644
--- a/Documentation/trace/index.rst
+++ b/Documentation/trace/index.rst
@@ -13,6 +13,7 @@ Linux Tracing Technologies
    kprobes
    kprobetrace
    uprobetracer
+   fprobetrace
    tracepoints
    events
    events-kmem
diff --git a/Documentation/trace/kprobetrace.rst b/Documentation/trace/kprobetrace.rst
index 651f9ab53f3ee..8a2dfee381454 100644
--- a/Documentation/trace/kprobetrace.rst
+++ b/Documentation/trace/kprobetrace.rst
@@ -66,6 +66,8 @@ Synopsis of kprobe_events
   (\*3) this is useful for fetching a field of data structures.
   (\*4) "u" means user-space dereference. See :ref:`user_mem_access`.
 
+.. _kprobetrace_types:
+
 Types
 -----
 Several types are supported for fetchargs. Kprobe tracer will access memory
diff --git a/Documentation/trace/timerlat-tracer.rst b/Documentation/trace/timerlat-tracer.rst
index db17df312bc87..53a56823e903d 100644
--- a/Documentation/trace/timerlat-tracer.rst
+++ b/Documentation/trace/timerlat-tracer.rst
@@ -180,3 +180,81 @@ dummy_load_1ms_pd_init, which had the following code (on purpose)::
 		return 0;
 
 	}
+
+User-space interface
+---------------------------
+
+Timerlat allows user-space threads to use timerlat infra-structure to
+measure scheduling latency. This interface is accessible via a per-CPU
+file descriptor inside $tracing_dir/osnoise/per_cpu/cpu$ID/timerlat_fd.
+
+This interface is accessible under the following conditions:
+
+ - timerlat tracer is enable
+ - osnoise workload option is set to NO_OSNOISE_WORKLOAD
+ - The user-space thread is affined to a single processor
+ - The thread opens the file associated with its single processor
+ - Only one thread can access the file at a time
+
+The open() syscall will fail if any of these conditions are not met.
+After opening the file descriptor, the user space can read from it.
+
+The read() system call will run a timerlat code that will arm the
+timer in the future and wait for it as the regular kernel thread does.
+
+When the timer IRQ fires, the timerlat IRQ will execute, report the
+IRQ latency and wake up the thread waiting in the read. The thread will be
+scheduled and report the thread latency via tracer - as for the kernel
+thread.
+
+The difference from the in-kernel timerlat is that, instead of re-arming
+the timer, timerlat will return to the read() system call. At this point,
+the user can run any code.
+
+If the application rereads the file timerlat file descriptor, the tracer
+will report the return from user-space latency, which is the total
+latency. If this is the end of the work, it can be interpreted as the
+response time for the request.
+
+After reporting the total latency, timerlat will restart the cycle, arm
+a timer, and go to sleep for the following activation.
+
+If at any time one of the conditions is broken, e.g., the thread migrates
+while in user space, or the timerlat tracer is disabled, the SIG_KILL
+signal will be sent to the user-space thread.
+
+Here is an basic example of user-space code for timerlat::
+
+ int main(void)
+ {
+	char buffer[1024];
+	int timerlat_fd;
+	int retval;
+	long cpu = 0;   /* place in CPU 0 */
+	cpu_set_t set;
+
+	CPU_ZERO(&set);
+	CPU_SET(cpu, &set);
+
+	if (sched_setaffinity(gettid(), sizeof(set), &set) == -1)
+		return 1;
+
+	snprintf(buffer, sizeof(buffer),
+		"/sys/kernel/tracing/osnoise/per_cpu/cpu%ld/timerlat_fd",
+		cpu);
+
+	timerlat_fd = open(buffer, O_RDONLY);
+	if (timerlat_fd < 0) {
+		printf("error opening %s: %s\n", buffer, strerror(errno));
+		exit(1);
+	}
+
+	for (;;) {
+		retval = read(timerlat_fd, buffer, 1024);
+		if (retval < 0)
+			break;
+	}
+
+	close(timerlat_fd);
+	exit(0);
+ }
diff --git a/Documentation/translations/zh_CN/arch/arm/Booting b/Documentation/translations/zh_CN/arch/arm/Booting
new file mode 100644
index 0000000000000..f18585156b677
--- /dev/null
+++ b/Documentation/translations/zh_CN/arch/arm/Booting
@@ -0,0 +1,175 @@
+Chinese translated version of Documentation/arch/arm/booting.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Russell King <linux@arm.linux.org.uk>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/arch/arm/booting.rst 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Russell King <linux@arm.linux.org.uk>
+中文版维护者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+中文版翻译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+中文版校译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+
+以下为正文
+---------------------------------------------------------------------
+
+			启动 ARM Linux
+			==============
+
+作者：Russell King
+日期：2002年5月18日
+
+以下文档适用于 2.4.18-rmk6 及以上版本。
+
+为了启动 ARM Linux，你需要一个引导装载程序（boot loader），
+它是一个在主内核启动前运行的一个小程序。引导装载程序需要初始化各种
+设备，并最终调用 Linux 内核，将信息传递给内核。
+
+从本质上讲，引导装载程序应提供（至少）以下功能：
+
+1、设置和初始化 RAM。
+2、初始化一个串口。
+3、检测机器的类型（machine type）。
+4、设置内核标签列表（tagged list）。
+5、调用内核映像。
+
+
+1、设置和初始化 RAM
+-------------------
+
+现有的引导加载程序:		强制
+新开发的引导加载程序:		强制
+
+引导装载程序应该找到并初始化系统中所有内核用于保持系统变量数据的 RAM。
+这个操作的执行是设备依赖的。（它可能使用内部算法来自动定位和计算所有
+RAM，或可能使用对这个设备已知的 RAM 信息，还可能使用任何引导装载程序
+设计者想到的匹配方法。）
+
+
+2、初始化一个串口
+-----------------------------
+
+现有的引导加载程序:		可选、建议
+新开发的引导加载程序:		可选、建议
+
+引导加载程序应该初始化并使能一个目标板上的串口。这允许内核串口驱动
+自动检测哪个串口用于内核控制台。(一般用于调试或与目标板通信。)
+
+作为替代方案，引导加载程序也可以通过标签列表传递相关的'console='
+选项给内核以指定某个串口，而串口数据格式的选项在以下文档中描述：
+
+       Documentation/admin-guide/kernel-parameters.rst。
+
+
+3、检测机器类型
+--------------------------
+
+现有的引导加载程序:		可选
+新开发的引导加载程序:		强制
+
+引导加载程序应该通过某些方式检测自身所处的机器类型。这是一个硬件
+代码或通过查看所连接的硬件用某些算法得到，这些超出了本文档的范围。
+引导加载程序最终必须能提供一个 MACH_TYPE_xxx 值给内核。
+(详见 linux/arch/arm/tools/mach-types )。
+
+4、设置启动数据
+------------------
+
+现有的引导加载程序:		可选、强烈建议
+新开发的引导加载程序:		强制
+
+引导加载程序必须提供标签列表或者 dtb 映像以传递配置数据给内核。启动
+数据的物理地址通过寄存器 r2 传递给内核。
+
+4a、设置内核标签列表
+--------------------------------
+
+bootloader 必须创建和初始化内核标签列表。一个有效的标签列表以
+ATAG_CORE 标签开始，并以 ATAG_NONE 标签结束。ATAG_CORE 标签可以是
+空的，也可以是非空。一个空 ATAG_CORE 标签其 size 域设置为
+‘2’(0x00000002)。ATAG_NONE 标签的 size 域必须设置为零。
+
+在列表中可以保存任意数量的标签。对于一个重复的标签是追加到之前标签
+所携带的信息之后，还是会覆盖原来的信息，是未定义的。某些标签的行为
+是前者，其他是后者。
+
+bootloader 必须传递一个系统内存的位置和最小值，以及根文件系统位置。
+因此，最小的标签列表如下所示：
+
+		+-----------+
+基地址 ->	| ATAG_CORE |  |
+		+-----------+  |
+		| ATAG_MEM  |  | 地址增长方向
+		+-----------+  |
+		| ATAG_NONE |  |
+		+-----------+  v
+
+标签列表应该保存在系统的 RAM 中。
+
+标签列表必须置于内核自解压和 initrd'bootp' 程序都不会覆盖的内存区。
+建议放在 RAM 的头 16KiB 中。
+
+4b、设置设备树
+-------------------------
+
+bootloader 必须以 64bit 地址对齐的形式加载一个设备树映像(dtb)到系统
+RAM 中，并用启动数据初始化它。dtb 格式在文档
+https://www.devicetree.org/specifications/ 中。内核将会在
+dtb 物理地址处查找 dtb 魔数值（0xd00dfeed），以确定 dtb 是否已经代替
+标签列表被传递进来。
+
+bootloader 必须传递一个系统内存的位置和最小值，以及根文件系统位置。
+dtb 必须置于内核自解压不会覆盖的内存区。建议将其放置于 RAM 的头 16KiB
+中。但是不可将其放置于“0”物理地址处，因为内核认为：r2 中为 0，意味着
+没有标签列表和 dtb 传递过来。
+
+5、调用内核映像
+---------------------------
+
+现有的引导加载程序:		强制
+新开发的引导加载程序:		强制
+
+调用内核映像 zImage 有两个选择。如果 zImge 保存在 flash 中，且是为了
+在 flash 中直接运行而被正确链接的。这样引导加载程序就可以在 flash 中
+直接调用 zImage。
+
+zImage 也可以被放在系统 RAM（任意位置）中被调用。注意：内核使用映像
+基地址的前 16KB RAM 空间来保存页表。建议将映像置于 RAM 的 32KB 处。
+
+对于以上任意一种情况，都必须符合以下启动状态：
+
+- 停止所有 DMA 设备，这样内存数据就不会因为虚假网络包或磁盘数据而被破坏。
+  这可能可以节省你许多的调试时间。
+
+- CPU 寄存器配置
+  r0 = 0，
+  r1 = （在上面 3 中获取的）机器类型码。
+  r2 = 标签列表在系统 RAM 中的物理地址，或
+       设备树块(dtb)在系统 RAM 中的物理地址
+
+- CPU 模式
+  所有形式的中断必须被禁止 (IRQs 和 FIQs)
+  CPU 必须处于 SVC 模式。(对于 Angel 调试有特例存在)
+
+- 缓存，MMUs
+  MMU 必须关闭。
+  指令缓存开启或关闭都可以。
+  数据缓存必须关闭。
+
+- 引导加载程序应该通过直接跳转到内核映像的第一条指令来调用内核映像。
+
+  对于支持 ARM 指令集的 CPU，跳入内核入口时必须处在 ARM 状态，即使
+  对于 Thumb-2 内核也是如此。
+
+  对于仅支持 Thumb 指令集的 CPU，比如 Cortex-M 系列的 CPU，跳入
+  内核入口时必须处于 Thumb 状态。
diff --git a/Documentation/translations/zh_CN/arch/arm/kernel_user_helpers.txt b/Documentation/translations/zh_CN/arch/arm/kernel_user_helpers.txt
new file mode 100644
index 0000000000000..018eb7d542331
--- /dev/null
+++ b/Documentation/translations/zh_CN/arch/arm/kernel_user_helpers.txt
@@ -0,0 +1,284 @@
+Chinese translated version of Documentation/arch/arm/kernel_user_helpers.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Nicolas Pitre <nicolas.pitre@linaro.org>
+		Dave Martin <dave.martin@linaro.org>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/arch/arm/kernel_user_helpers.rst 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+英文版维护者： Nicolas Pitre <nicolas.pitre@linaro.org>
+		Dave Martin <dave.martin@linaro.org>
+中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版校译者： 宋冬生 Dongsheng Song <dongshneg.song@gmail.com>
+		傅炜 Fu Wei <tekkamanninja@gmail.com>
+
+
+以下为正文
+---------------------------------------------------------------------
+内核提供的用户空间辅助代码
+=========================
+
+在内核内存空间的固定地址处，有一个由内核提供并可从用户空间访问的代码
+段。它用于向用户空间提供因在许多 ARM CPU 中未实现的特性和/或指令而需
+内核提供帮助的某些操作。这些代码直接在用户模式下执行的想法是为了获得
+最佳效率，但那些与内核计数器联系过于紧密的部分，则被留给了用户库实现。
+事实上，此代码甚至可能因不同的 CPU 而异，这取决于其可用的指令集或它
+是否为 SMP 系统。换句话说，内核保留在不作出警告的情况下根据需要更改
+这些代码的权利。只有本文档描述的入口及其结果是保证稳定的。
+
+这与完全成熟的 VDSO 实现不同（但两者并不冲突），尽管如此，VDSO 可阻止
+某些通过常量高效跳转到那些代码段的汇编技巧。且由于那些代码段在返回用户
+代码前仅使用少量的代码周期，则一个 VDSO 间接远程调用将会在这些简单的
+操作上增加一个可测量的开销。
+
+在对那些拥有原生支持的新型处理器进行代码优化时，仅在已为其他操作使用
+了类似的新增指令，而导致二进制结果已与早期 ARM 处理器不兼容的情况下，
+用户空间才应绕过这些辅助代码，并在内联函数中实现这些操作（无论是通过
+编译器在代码中直接放置，还是作为库函数调用实现的一部分）。也就是说，
+如果你编译的代码不会为了其他目的使用新指令，则不要仅为了避免使用这些
+内核辅助代码，导致二进制程序无法在早期处理器上运行。
+
+新的辅助代码可能随着时间的推移而增加，所以新内核中的某些辅助代码在旧
+内核中可能不存在。因此，程序必须在对任何辅助代码调用假设是安全之前，
+检测 __kuser_helper_version 的值（见下文）。理想情况下，这种检测应该
+只在进程启动时执行一次；如果内核版本不支持所需辅助代码，则该进程可尽早
+中止执行。
+
+kuser_helper_version
+--------------------
+
+位置:	0xffff0ffc
+
+参考声明:
+
+  extern int32_t __kuser_helper_version;
+
+定义:
+
+  这个区域包含了当前运行内核实现的辅助代码版本号。用户空间可以通过读
+  取此版本号以确定特定的辅助代码是否存在。
+
+使用范例:
+
+#define __kuser_helper_version (*(int32_t *)0xffff0ffc)
+
+void check_kuser_version(void)
+{
+	if (__kuser_helper_version < 2) {
+		fprintf(stderr, "can't do atomic operations, kernel too old\n");
+		abort();
+	}
+}
+
+注意:
+
+  用户空间可以假设这个域的值不会在任何单个进程的生存期内改变。也就
+  是说，这个域可以仅在库的初始化阶段或进程启动阶段读取一次。
+
+kuser_get_tls
+-------------
+
+位置:	0xffff0fe0
+
+参考原型:
+
+  void * __kuser_get_tls(void);
+
+输入:
+
+  lr = 返回地址
+
+输出:
+
+  r0 = TLS 值
+
+被篡改的寄存器:
+
+  无
+
+定义:
+
+  获取之前通过 __ARM_NR_set_tls 系统调用设置的 TLS 值。
+
+使用范例:
+
+typedef void * (__kuser_get_tls_t)(void);
+#define __kuser_get_tls (*(__kuser_get_tls_t *)0xffff0fe0)
+
+void foo()
+{
+	void *tls = __kuser_get_tls();
+	printf("TLS = %p\n", tls);
+}
+
+注意:
+
+  - 仅在 __kuser_helper_version >= 1 时，此辅助代码存在
+    （从内核版本 2.6.12 开始）。
+
+kuser_cmpxchg
+-------------
+
+位置:	0xffff0fc0
+
+参考原型:
+
+  int __kuser_cmpxchg(int32_t oldval, int32_t newval, volatile int32_t *ptr);
+
+输入:
+
+  r0 = oldval
+  r1 = newval
+  r2 = ptr
+  lr = 返回地址
+
+输出:
+
+  r0 = 成功代码 (零或非零)
+  C flag = 如果 r0 == 0 则置 1，如果 r0 != 0 则清零。
+
+被篡改的寄存器:
+
+  r3, ip, flags
+
+定义:
+
+  仅在 *ptr 为 oldval 时原子保存 newval 于 *ptr 中。
+  如果 *ptr 被改变，则返回值为零，否则为非零值。
+  如果 *ptr 被改变，则 C flag 也会被置 1，以实现调用代码中的汇编
+  优化。
+
+使用范例:
+
+typedef int (__kuser_cmpxchg_t)(int oldval, int newval, volatile int *ptr);
+#define __kuser_cmpxchg (*(__kuser_cmpxchg_t *)0xffff0fc0)
+
+int atomic_add(volatile int *ptr, int val)
+{
+	int old, new;
+
+	do {
+		old = *ptr;
+		new = old + val;
+	} while(__kuser_cmpxchg(old, new, ptr));
+
+	return new;
+}
+
+注意:
+
+  - 这个例程已根据需要包含了内存屏障。
+
+  - 仅在 __kuser_helper_version >= 2 时，此辅助代码存在
+    （从内核版本 2.6.12 开始）。
+
+kuser_memory_barrier
+--------------------
+
+位置:	0xffff0fa0
+
+参考原型:
+
+  void __kuser_memory_barrier(void);
+
+输入:
+
+  lr = 返回地址
+
+输出:
+
+  无
+
+被篡改的寄存器:
+
+  无
+
+定义:
+
+  应用于任何需要内存屏障以防止手动数据修改带来的一致性问题，以及
+  __kuser_cmpxchg 中。
+
+使用范例:
+
+typedef void (__kuser_dmb_t)(void);
+#define __kuser_dmb (*(__kuser_dmb_t *)0xffff0fa0)
+
+注意:
+
+  - 仅在 __kuser_helper_version >= 3 时，此辅助代码存在
+    （从内核版本 2.6.15 开始）。
+
+kuser_cmpxchg64
+---------------
+
+位置:	0xffff0f60
+
+参考原型:
+
+  int __kuser_cmpxchg64(const int64_t *oldval,
+                        const int64_t *newval,
+                        volatile int64_t *ptr);
+
+输入:
+
+  r0 = 指向 oldval
+  r1 = 指向 newval
+  r2 = 指向目标值
+  lr = 返回地址
+
+输出:
+
+  r0 = 成功代码 (零或非零)
+  C flag = 如果 r0 == 0 则置 1，如果 r0 != 0 则清零。
+
+被篡改的寄存器:
+
+  r3, lr, flags
+
+定义:
+
+  仅在 *ptr 等于 *oldval 指向的 64 位值时，原子保存 *newval
+  指向的 64 位值于 *ptr 中。如果 *ptr 被改变，则返回值为零，
+  否则为非零值。
+
+  如果 *ptr 被改变，则 C flag 也会被置 1，以实现调用代码中的汇编
+  优化。
+
+使用范例:
+
+typedef int (__kuser_cmpxchg64_t)(const int64_t *oldval,
+                                  const int64_t *newval,
+                                  volatile int64_t *ptr);
+#define __kuser_cmpxchg64 (*(__kuser_cmpxchg64_t *)0xffff0f60)
+
+int64_t atomic_add64(volatile int64_t *ptr, int64_t val)
+{
+	int64_t old, new;
+
+	do {
+		old = *ptr;
+		new = old + val;
+	} while(__kuser_cmpxchg64(&old, &new, ptr));
+
+	return new;
+}
+
+注意:
+
+  - 这个例程已根据需要包含了内存屏障。
+
+  - 由于这个过程的代码长度（此辅助代码跨越 2 个常规的 kuser “槽”），
+    因此 0xffff0f80 不被作为有效的入口点。
+
+  - 仅在 __kuser_helper_version >= 5 时，此辅助代码存在
+    （从内核版本 3.1 开始）。
diff --git a/Documentation/translations/zh_CN/arch/arm64/amu.rst b/Documentation/translations/zh_CN/arch/arm64/amu.rst
new file mode 100644
index 0000000000000..f8e09fd21ef54
--- /dev/null
+++ b/Documentation/translations/zh_CN/arch/arm64/amu.rst
@@ -0,0 +1,100 @@
+.. include:: ../../disclaimer-zh_CN.rst
+
+:Original: :ref:`Documentation/arch/arm64/amu.rst <amu_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+
+==================================
+AArch64 Linux 中扩展的活动监控单元
+==================================
+
+作者: Ionela Voinescu <ionela.voinescu@arm.com>
+
+日期: 2019-09-10
+
+本文档简要描述了 AArch64 Linux 支持的活动监控单元的规范。
+
+
+架构总述
+--------
+
+活动监控是 ARMv8.4 CPU 架构引入的一个可选扩展特性。
+
+活动监控单元(在每个 CPU 中实现)为系统管理提供了性能计数器。既可以通
+过系统寄存器的方式访问计数器，同时也支持外部内存映射的方式访问计数器。
+
+AMUv1 架构实现了一个由4个固定的64位事件计数器组成的计数器组。
+
+  - CPU 周期计数器：同 CPU 的频率增长
+  - 常量计数器：同固定的系统时钟频率增长
+  - 淘汰指令计数器: 同每次架构指令执行增长
+  - 内存停顿周期计数器：计算由在时钟域内的最后一级缓存中未命中而引起
+    的指令调度停顿周期数
+
+当处于 WFI 或者 WFE 状态时，计数器不会增长。
+
+AMU 架构提供了一个高达16位的事件计数器空间，未来新的 AMU 版本中可能
+用它来实现新增的事件计数器。
+
+另外，AMUv1 实现了一个多达16个64位辅助事件计数器的计数器组。
+
+冷复位时所有的计数器会清零。
+
+
+基本支持
+--------
+
+内核可以安全地运行在支持 AMU 和不支持 AMU 的 CPU 组合中。
+因此，当配置 CONFIG_ARM64_AMU_EXTN 后我们无条件使能后续
+(secondary or hotplugged) CPU 检测和使用这个特性。
+
+当在 CPU 上检测到该特性时，我们会标记为特性可用但是不能保证计数器的功能，
+仅表明有扩展属性。
+
+固件(代码运行在高异常级别，例如 arm-tf )需支持以下功能：
+
+ - 提供低异常级别(EL2 和 EL1)访问 AMU 寄存器的能力。
+ - 使能计数器。如果未使能，它的值应为 0。
+ - 在从电源关闭状态启动 CPU 前或后保存或者恢复计数器。
+
+当使用使能了该特性的内核启动但固件损坏时，访问计数器寄存器可能会遭遇
+panic 或者死锁。即使未发现这些症状，计数器寄存器返回的数据结果并不一
+定能反映真实情况。通常，计数器会返回 0，表明他们未被使能。
+
+如果固件没有提供适当的支持最好关闭 CONFIG_ARM64_AMU_EXTN。
+值得注意的是，出于安全原因，不要绕过 AMUSERRENR_EL0 设置而捕获从
+EL0(用户空间) 访问 EL1(内核空间)。 因此，固件应该确保访问 AMU寄存器
+不会困在 EL2或EL3。
+
+AMUv1 的固定计数器可以通过如下系统寄存器访问：
+
+ - SYS_AMEVCNTR0_CORE_EL0
+ - SYS_AMEVCNTR0_CONST_EL0
+ - SYS_AMEVCNTR0_INST_RET_EL0
+ - SYS_AMEVCNTR0_MEM_STALL_EL0
+
+特定辅助计数器可以通过 SYS_AMEVCNTR1_EL0(n) 访问，其中n介于0到15。
+
+详细信息定义在目录：arch/arm64/include/asm/sysreg.h。
+
+
+用户空间访问
+------------
+
+由于以下原因，当前禁止从用户空间访问 AMU 的寄存器：
+
+  - 安全因数：可能会暴露处于安全模式执行的代码信息。
+  - 意愿：AMU 是用于系统管理的。
+
+同样，该功能对用户空间不可见。
+
+
+虚拟化
+------
+
+由于以下原因，当前禁止从 KVM 客户端的用户空间(EL0)和内核空间(EL1)
+访问 AMU 的寄存器：
+
+  - 安全因数：可能会暴露给其他客户端或主机端执行的代码信息。
+
+任何试图访问 AMU 寄存器的行为都会触发一个注册在客户端的未定义异常。
diff --git a/Documentation/translations/zh_CN/arch/arm64/booting.txt b/Documentation/translations/zh_CN/arch/arm64/booting.txt
new file mode 100644
index 0000000000000..630eb32a88549
--- /dev/null
+++ b/Documentation/translations/zh_CN/arch/arm64/booting.txt
@@ -0,0 +1,246 @@
+Chinese translated version of Documentation/arch/arm64/booting.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+M:	Will Deacon <will.deacon@arm.com>
+zh_CN:	Fu Wei <wefu@redhat.com>
+C:	55f058e7574c3615dea4615573a19bdb258696c6
+---------------------------------------------------------------------
+Documentation/arch/arm64/booting.rst 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Will Deacon <will.deacon@arm.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
+本文翻译提交时的 Git 检出点为： 55f058e7574c3615dea4615573a19bdb258696c6
+
+以下为正文
+---------------------------------------------------------------------
+			启动 AArch64 Linux
+			==================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2012 年 09 月 07 日
+
+本文档基于 Russell King 的 ARM 启动文档，且适用于所有公开发布的
+AArch64 Linux 内核代码。
+
+AArch64 异常模型由多个异常级（EL0 - EL3）组成，对于 EL0 和 EL1 异常级
+有对应的安全和非安全模式。EL2 是系统管理级，且仅存在于非安全模式下。
+EL3 是最高特权级，且仅存在于安全模式下。
+
+基于本文档的目的，我们将简单地使用‘引导装载程序’（‘boot loader’）
+这个术语来定义在将控制权交给 Linux 内核前 CPU 上执行的所有软件。
+这可能包含安全监控和系统管理代码，或者它可能只是一些用于准备最小启动
+环境的指令。
+
+基本上，引导装载程序（至少）应实现以下操作：
+
+1、设置和初始化 RAM
+2、设置设备树数据
+3、解压内核映像
+4、调用内核映像
+
+
+1、设置和初始化 RAM
+-----------------
+
+必要性: 强制
+
+引导装载程序应该找到并初始化系统中所有内核用于保持系统变量数据的 RAM。
+这个操作的执行方式因设备而异。（它可能使用内部算法来自动定位和计算所有
+RAM，或可能使用对这个设备已知的 RAM 信息，还可能是引导装载程序设计者
+想到的任何合适的方法。）
+
+
+2、设置设备树数据
+---------------
+
+必要性: 强制
+
+设备树数据块（dtb）必须 8 字节对齐，且大小不能超过 2MB。由于设备树
+数据块将在使能缓存的情况下以 2MB 粒度被映射，故其不能被置于必须以特定
+属性映射的2M区域内。
+
+注： v4.2 之前的版本同时要求设备树数据块被置于从内核映像以下
+text_offset 字节处算起第一个 512MB 内。
+
+3、解压内核映像
+-------------
+
+必要性: 可选
+
+AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内核映像文件
+（比如 Image.gz），则需要通过引导装载程序（使用 gzip 等）来进行解压。
+若引导装载程序没有实现这个功能，就要使用非压缩内核映像文件。
+
+
+4、调用内核映像
+-------------
+
+必要性: 强制
+
+已解压的内核映像包含一个 64 字节的头，内容如下：
+
+  u32 code0;			/* 可执行代码 */
+  u32 code1;			/* 可执行代码 */
+  u64 text_offset;		/* 映像装载偏移，小端模式 */
+  u64 image_size;		/* 映像实际大小, 小端模式 */
+  u64 flags;			/* 内核旗标, 小端模式 *
+  u64 res2	= 0;		/* 保留 */
+  u64 res3	= 0;		/* 保留 */
+  u64 res4	= 0;		/* 保留 */
+  u32 magic	= 0x644d5241;	/* 魔数, 小端, "ARM\x64" */
+  u32 res5;			/* 保留 （用于 PE COFF 偏移） */
+
+
+映像头注释：
+
+- 自 v3.17 起，除非另有说明，所有域都是小端模式。
+
+- code0/code1 负责跳转到 stext.
+
+- 当通过 EFI 启动时， 最初 code0/code1 被跳过。
+  res5 是到 PE 文件头的偏移，而 PE 文件头含有 EFI 的启动入口点
+  （efi_stub_entry）。当 stub 代码完成了它的使命，它会跳转到 code0
+  继续正常的启动流程。
+
+- v3.17 之前，未明确指定 text_offset 的字节序。此时，image_size 为零，
+  且 text_offset 依照内核字节序为 0x80000。
+  当 image_size 非零，text_offset 为小端模式且是有效值，应被引导加载
+  程序使用。当 image_size 为零，text_offset 可假定为 0x80000。
+
+- flags 域 (v3.17 引入) 为 64 位小端模式，其编码如下：
+  位 0: 	内核字节序。 1 表示大端模式，0 表示小端模式。
+  位 1-2:	内核页大小。
+			0 - 未指定。
+			1 - 4K
+			2 - 16K
+			3 - 64K
+  位 3:		内核物理位置
+			0 - 2MB 对齐基址应尽量靠近内存起始处，因为
+			    其基址以下的内存无法通过线性映射访问
+			1 - 2MB 对齐基址可以在物理内存的任意位置
+  位 4-63:	保留。
+
+- 当 image_size 为零时，引导装载程序应试图在内核映像末尾之后尽可能
+  多地保留空闲内存供内核直接使用。对内存空间的需求量因所选定的内核
+  特性而异, 并无实际限制。
+
+内核映像必须被放置在任意一个可用系统内存 2MB 对齐基址的 text_offset
+字节处，并从该处被调用。2MB 对齐基址和内核映像起始地址之间的区域对于
+内核来说没有特殊意义，且可能被用于其他目的。
+从映像起始地址算起，最少必须准备 image_size 字节的空闲内存供内核使用。
+注： v4.6 之前的版本无法使用内核映像物理偏移以下的内存，所以当时建议
+将映像尽量放置在靠近系统内存起始的地方。
+
+任何提供给内核的内存（甚至在映像起始地址之前），若未从内核中标记为保留
+(如在设备树（dtb）的 memreserve 区域），都将被认为对内核是可用。
+
+在跳转入内核前，必须符合以下状态：
+
+- 停止所有 DMA 设备，这样内存数据就不会因为虚假网络包或磁盘数据而
+  被破坏。这可能可以节省你许多的调试时间。
+
+- 主 CPU 通用寄存器设置
+  x0 = 系统 RAM 中设备树数据块（dtb）的物理地址。
+  x1 = 0 (保留，将来可能使用)
+  x2 = 0 (保留，将来可能使用)
+  x3 = 0 (保留，将来可能使用)
+
+- CPU 模式
+  所有形式的中断必须在 PSTATE.DAIF 中被屏蔽（Debug、SError、IRQ
+  和 FIQ）。
+  CPU 必须处于 EL2（推荐，可访问虚拟化扩展）或非安全 EL1 模式下。
+
+- 高速缓存、MMU
+  MMU 必须关闭。
+  指令缓存开启或关闭皆可。
+  已载入的内核映像的相应内存区必须被清理，以达到缓存一致性点（PoC）。
+  当存在系统缓存或其他使能缓存的一致性主控器时，通常需使用虚拟地址
+  维护其缓存，而非 set/way 操作。
+  遵从通过虚拟地址操作维护构架缓存的系统缓存必须被配置，并可以被使能。
+  而不通过虚拟地址操作维护构架缓存的系统缓存（不推荐），必须被配置且
+  禁用。
+
+  *译者注：对于 PoC 以及缓存相关内容，请参考 ARMv8 构架参考手册
+   ARM DDI 0487A
+
+- 架构计时器
+  CNTFRQ 必须设定为计时器的频率，且 CNTVOFF 必须设定为对所有 CPU
+  都一致的值。如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的
+  EL1PCTEN (bit 0) 必须置位。
+
+- 一致性
+  通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。
+  这可能要根据具体实现来定义初始化过程，以使能每个CPU上对维护操作的
+  接收。
+
+- 系统寄存器
+  在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件
+  在一个更高的异常级别下初始化，以防止在 未知 状态下运行。
+
+  对于拥有 GICv3 中断控制器并以 v3 模式运行的系统：
+  - 如果 EL3 存在：
+    ICC_SRE_EL3.Enable (位 3) 必须初始化为 0b1。
+    ICC_SRE_EL3.SRE (位 0) 必须初始化为 0b1。
+  - 若内核运行在 EL1：
+    ICC_SRE_EL2.Enable (位 3) 必须初始化为 0b1。
+    ICC_SRE_EL2.SRE (位 0) 必须初始化为 0b1。
+  - 设备树（DT）或 ACPI 表必须描述一个 GICv3 中断控制器。
+
+  对于拥有 GICv3 中断控制器并以兼容（v2）模式运行的系统：
+  - 如果 EL3 存在：
+    ICC_SRE_EL3.SRE (位 0) 必须初始化为 0b0。
+  - 若内核运行在 EL1：
+    ICC_SRE_EL2.SRE (位 0) 必须初始化为 0b0。
+  - 设备树（DT）或 ACPI 表必须描述一个 GICv2 中断控制器。
+
+以上对于 CPU 模式、高速缓存、MMU、架构计时器、一致性、系统寄存器的
+必要条件描述适用于所有 CPU。所有 CPU 必须在同一异常级别跳入内核。
+
+引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口：
+
+- 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树
+  数据块必须在每个 CPU 节点中包含一个 ‘enable-method’ 属性，所
+  支持的 enable-method 请见下文。
+
+  引导装载程序必须生成这些设备树属性，并在跳入内核入口之前将其插入
+  数据块。
+
+- enable-method 为 “spin-table” 的 CPU 必须在它们的 CPU
+  节点中包含一个 ‘cpu-release-addr’ 属性。这个属性标识了一个
+  64 位自然对齐且初始化为零的内存位置。
+
+  这些 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
+  给内核）中自旋于内核之外，轮询它们的 cpu-release-addr 位置（必须
+  包含在保留区中）。可通过插入 wfe 指令来降低忙循环开销，而主 CPU 将
+  发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值
+  时，CPU 必须跳入此值所指向的地址。此值为一个单独的 64 位小端值，
+  因此 CPU 须在跳转前将所读取的值转换为其本身的端模式。
+
+- enable-method 为 “psci” 的 CPU 保持在内核外（比如，在
+  memory 节点中描述为内核空间的内存区外，或在通过设备树 /memreserve/
+  域中描述为内核保留区的空间中）。内核将会发起在 ARM 文档（编号
+  ARM DEN 0022A：用于 ARM 上的电源状态协调接口系统软件）中描述的
+  CPU_ON 调用来将 CPU 带入内核。
+
+  *译者注: ARM DEN 0022A 已更新到 ARM DEN 0022C。
+
+  设备树必须包含一个 ‘psci’ 节点，请参考以下文档：
+  Documentation/devicetree/bindings/arm/psci.yaml
+
+
+- 辅助 CPU 通用寄存器设置
+  x0 = 0 (保留，将来可能使用)
+  x1 = 0 (保留，将来可能使用)
+  x2 = 0 (保留，将来可能使用)
+  x3 = 0 (保留，将来可能使用)
diff --git a/Documentation/translations/zh_CN/arch/arm64/elf_hwcaps.rst b/Documentation/translations/zh_CN/arch/arm64/elf_hwcaps.rst
new file mode 100644
index 0000000000000..f60ac1580d3ee
--- /dev/null
+++ b/Documentation/translations/zh_CN/arch/arm64/elf_hwcaps.rst
@@ -0,0 +1,240 @@
+.. include:: ../../disclaimer-zh_CN.rst
+
+:Original: :ref:`Documentation/arch/arm64/elf_hwcaps.rst <elf_hwcaps_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+
+================
+ARM64 ELF hwcaps
+================
+
+这篇文档描述了 arm64 ELF hwcaps 的用法和语义。
+
+
+1. 简介
+-------
+
+有些硬件或软件功能仅在某些 CPU 实现上和/或在具体某个内核配置上可用，但
+对于处于 EL0 的用户空间代码没有可用的架构发现机制。内核通过在辅助向量表
+公开一组称为 hwcaps 的标志而把这些功能暴露给用户空间。
+
+用户空间软件可以通过获取辅助向量的 AT_HWCAP 或 AT_HWCAP2 条目来测试功能，
+并测试是否设置了相关标志，例如::
+
+	bool floating_point_is_present(void)
+	{
+		unsigned long hwcaps = getauxval(AT_HWCAP);
+		if (hwcaps & HWCAP_FP)
+			return true;
+
+		return false;
+	}
+
+如果软件依赖于 hwcap 描述的功能，在尝试使用该功能前则应检查相关的 hwcap
+标志以验证该功能是否存在。
+
+不能通过其他方式探查这些功能。当一个功能不可用时，尝试使用它可能导致不可
+预测的行为，并且无法保证能确切的知道该功能不可用，例如 SIGILL。
+
+
+2. Hwcaps 的说明
+----------------
+
+大多数 hwcaps 旨在说明通过架构 ID 寄存器(处于 EL0 的用户空间代码无法访问)
+描述的功能的存在。这些 hwcap 通过 ID 寄存器字段定义，并且应根据 ARM 体系
+结构参考手册（ARM ARM）中定义的字段来解释说明。
+
+这些 hwcaps 以下面的形式描述::
+
+    idreg.field == val 表示有某个功能。
+
+当 idreg.field 中有 val 时，hwcaps 表示 ARM ARM 定义的功能是有效的，但是
+并不是说要完全和 val 相等，也不是说 idreg.field 描述的其他功能就是缺失的。
+
+其他 hwcaps 可能表明无法仅由 ID 寄存器描述的功能的存在。这些 hwcaps 可能
+没有被 ID 寄存器描述，需要参考其他文档。
+
+
+3. AT_HWCAP 中揭示的 hwcaps
+---------------------------
+
+HWCAP_FP
+    ID_AA64PFR0_EL1.FP == 0b0000 表示有此功能。
+
+HWCAP_ASIMD
+    ID_AA64PFR0_EL1.AdvSIMD == 0b0000 表示有此功能。
+
+HWCAP_EVTSTRM
+    通用计时器频率配置为大约100KHz以生成事件。
+
+HWCAP_AES
+    ID_AA64ISAR0_EL1.AES == 0b0001 表示有此功能。
+
+HWCAP_PMULL
+    ID_AA64ISAR0_EL1.AES == 0b0010 表示有此功能。
+
+HWCAP_SHA1
+    ID_AA64ISAR0_EL1.SHA1 == 0b0001 表示有此功能。
+
+HWCAP_SHA2
+    ID_AA64ISAR0_EL1.SHA2 == 0b0001 表示有此功能。
+
+HWCAP_CRC32
+    ID_AA64ISAR0_EL1.CRC32 == 0b0001 表示有此功能。
+
+HWCAP_ATOMICS
+    ID_AA64ISAR0_EL1.Atomic == 0b0010 表示有此功能。
+
+HWCAP_FPHP
+    ID_AA64PFR0_EL1.FP == 0b0001 表示有此功能。
+
+HWCAP_ASIMDHP
+    ID_AA64PFR0_EL1.AdvSIMD == 0b0001 表示有此功能。
+
+HWCAP_CPUID
+    根据 Documentation/arch/arm64/cpu-feature-registers.rst 描述，EL0 可以访问
+    某些 ID 寄存器。
+
+    这些 ID 寄存器可能表示功能的可用性。
+
+HWCAP_ASIMDRDM
+    ID_AA64ISAR0_EL1.RDM == 0b0001 表示有此功能。
+
+HWCAP_JSCVT
+    ID_AA64ISAR1_EL1.JSCVT == 0b0001 表示有此功能。
+
+HWCAP_FCMA
+    ID_AA64ISAR1_EL1.FCMA == 0b0001 表示有此功能。
+
+HWCAP_LRCPC
+    ID_AA64ISAR1_EL1.LRCPC == 0b0001 表示有此功能。
+
+HWCAP_DCPOP
+    ID_AA64ISAR1_EL1.DPB == 0b0001 表示有此功能。
+
+HWCAP_SHA3
+    ID_AA64ISAR0_EL1.SHA3 == 0b0001 表示有此功能。
+
+HWCAP_SM3
+    ID_AA64ISAR0_EL1.SM3 == 0b0001 表示有此功能。
+
+HWCAP_SM4
+    ID_AA64ISAR0_EL1.SM4 == 0b0001 表示有此功能。
+
+HWCAP_ASIMDDP
+    ID_AA64ISAR0_EL1.DP == 0b0001 表示有此功能。
+
+HWCAP_SHA512
+    ID_AA64ISAR0_EL1.SHA2 == 0b0010 表示有此功能。
+
+HWCAP_SVE
+    ID_AA64PFR0_EL1.SVE == 0b0001 表示有此功能。
+
+HWCAP_ASIMDFHM
+    ID_AA64ISAR0_EL1.FHM == 0b0001 表示有此功能。
+
+HWCAP_DIT
+    ID_AA64PFR0_EL1.DIT == 0b0001 表示有此功能。
+
+HWCAP_USCAT
+    ID_AA64MMFR2_EL1.AT == 0b0001 表示有此功能。
+
+HWCAP_ILRCPC
+    ID_AA64ISAR1_EL1.LRCPC == 0b0010 表示有此功能。
+
+HWCAP_FLAGM
+    ID_AA64ISAR0_EL1.TS == 0b0001 表示有此功能。
+
+HWCAP_SSBS
+    ID_AA64PFR1_EL1.SSBS == 0b0010 表示有此功能。
+
+HWCAP_SB
+    ID_AA64ISAR1_EL1.SB == 0b0001 表示有此功能。
+
+HWCAP_PACA
+    如 Documentation/arch/arm64/pointer-authentication.rst 所描述，
+    ID_AA64ISAR1_EL1.APA == 0b0001 或 ID_AA64ISAR1_EL1.API == 0b0001
+    表示有此功能。
+
+HWCAP_PACG
+    如 Documentation/arch/arm64/pointer-authentication.rst 所描述，
+    ID_AA64ISAR1_EL1.GPA == 0b0001 或 ID_AA64ISAR1_EL1.GPI == 0b0001
+    表示有此功能。
+
+HWCAP2_DCPODP
+
+    ID_AA64ISAR1_EL1.DPB == 0b0010 表示有此功能。
+
+HWCAP2_SVE2
+
+    ID_AA64ZFR0_EL1.SVEVer == 0b0001 表示有此功能。
+
+HWCAP2_SVEAES
+
+    ID_AA64ZFR0_EL1.AES == 0b0001 表示有此功能。
+
+HWCAP2_SVEPMULL
+
+    ID_AA64ZFR0_EL1.AES == 0b0010 表示有此功能。
+
+HWCAP2_SVEBITPERM
+
+    ID_AA64ZFR0_EL1.BitPerm == 0b0001 表示有此功能。
+
+HWCAP2_SVESHA3
+
+    ID_AA64ZFR0_EL1.SHA3 == 0b0001 表示有此功能。
+
+HWCAP2_SVESM4
+
+    ID_AA64ZFR0_EL1.SM4 == 0b0001 表示有此功能。
+
+HWCAP2_FLAGM2
+
+    ID_AA64ISAR0_EL1.TS == 0b0010 表示有此功能。
+
+HWCAP2_FRINT
+
+    ID_AA64ISAR1_EL1.FRINTTS == 0b0001 表示有此功能。
+
+HWCAP2_SVEI8MM
+
+    ID_AA64ZFR0_EL1.I8MM == 0b0001 表示有此功能。
+
+HWCAP2_SVEF32MM
+
+    ID_AA64ZFR0_EL1.F32MM == 0b0001 表示有此功能。
+
+HWCAP2_SVEF64MM
+
+    ID_AA64ZFR0_EL1.F64MM == 0b0001 表示有此功能。
+
+HWCAP2_SVEBF16
+
+    ID_AA64ZFR0_EL1.BF16 == 0b0001 表示有此功能。
+
+HWCAP2_I8MM
+
+    ID_AA64ISAR1_EL1.I8MM == 0b0001 表示有此功能。
+
+HWCAP2_BF16
+
+    ID_AA64ISAR1_EL1.BF16 == 0b0001 表示有此功能。
+
+HWCAP2_DGH
+
+    ID_AA64ISAR1_EL1.DGH == 0b0001 表示有此功能。
+
+HWCAP2_RNG
+
+    ID_AA64ISAR0_EL1.RNDR == 0b0001 表示有此功能。
+
+HWCAP2_BTI
+
+    ID_AA64PFR0_EL1.BT == 0b0001 表示有此功能。
+
+
+4. 未使用的 AT_HWCAP 位
+-----------------------
+
+为了与用户空间交互，内核保证 AT_HWCAP 的第62、63位将始终返回0。
diff --git a/Documentation/translations/zh_CN/arch/arm64/hugetlbpage.rst b/Documentation/translations/zh_CN/arch/arm64/hugetlbpage.rst
new file mode 100644
index 0000000000000..8079eadde29ad
--- /dev/null
+++ b/Documentation/translations/zh_CN/arch/arm64/hugetlbpage.rst
@@ -0,0 +1,45 @@
+.. include:: ../../disclaimer-zh_CN.rst
+
+:Original: :ref:`Documentation/arch/arm64/hugetlbpage.rst <hugetlbpage_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+
+=====================
+ARM64中的 HugeTLBpage
+=====================
+
+大页依靠有效利用 TLBs 来提高地址翻译的性能。这取决于以下
+两点 -
+
+  - 大页的大小
+  - TLBs 支持的条目大小
+
+ARM64 接口支持2种大页方式。
+
+1) pud/pmd 级别的块映射
+-----------------------
+
+这是常规大页，他们的 pmd 或 pud 页面表条目指向一个内存块。
+不管 TLB 中支持的条目大小如何，块映射可以减少翻译大页地址
+所需遍历的页表深度。
+
+2) 使用连续位
+-------------
+
+架构中转换页表条目(D4.5.3, ARM DDI 0487C.a)中提供一个连续
+位告诉 MMU 这个条目是一个连续条目集的一员，它可以被缓存在单
+个 TLB 条目中。
+
+在 Linux 中连续位用来增加 pmd 和 pte(最后一级)级别映射的大
+小。受支持的连续页表条目数量因页面大小和页表级别而异。
+
+
+支持以下大页尺寸配置 -
+
+  ====== ========   ====    ========    ===
+  -      CONT PTE    PMD    CONT PMD    PUD
+  ====== ========   ====    ========    ===
+  4K:         64K     2M         32M     1G
+  16K:         2M    32M          1G
+  64K:         2M   512M         16G
+  ====== ========   ====    ========    ===
diff --git a/Documentation/translations/zh_CN/arch/arm64/index.rst b/Documentation/translations/zh_CN/arch/arm64/index.rst
new file mode 100644
index 0000000000000..e12b9f6e5d6c3
--- /dev/null
+++ b/Documentation/translations/zh_CN/arch/arm64/index.rst
@@ -0,0 +1,19 @@
+.. include:: ../../disclaimer-zh_CN.rst
+
+:Original: :ref:`Documentation/arch/arm64/index.rst <arm64_index>`
+:Translator: Bailu Lin <bailu.lin@vivo.com>
+
+.. _cn_arm64_index:
+
+
+==========
+ARM64 架构
+==========
+
+.. toctree::
+    :maxdepth: 2
+
+    amu
+    hugetlbpage
+    perf
+    elf_hwcaps
diff --git a/Documentation/translations/zh_CN/arch/arm64/legacy_instructions.txt b/Documentation/translations/zh_CN/arch/arm64/legacy_instructions.txt
new file mode 100644
index 0000000000000..e469fccbe3560
--- /dev/null
+++ b/Documentation/translations/zh_CN/arch/arm64/legacy_instructions.txt
@@ -0,0 +1,72 @@
+Chinese translated version of Documentation/arch/arm64/legacy_instructions.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Punit Agrawal <punit.agrawal@arm.com>
+            Suzuki K. Poulose <suzuki.poulose@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+---------------------------------------------------------------------
+Documentation/arch/arm64/legacy_instructions.rst 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+本文翻译提交时的 Git 检出点为： bc465aa9d045feb0e13b4a8f32cc33c1943f62d6
+
+英文版维护者： Punit Agrawal <punit.agrawal@arm.com>
+            Suzuki K. Poulose <suzuki.poulose@arm.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
+
+以下为正文
+---------------------------------------------------------------------
+Linux 内核在 arm64 上的移植提供了一个基础框架，以支持构架中正在被淘汰或已废弃指令的模拟执行。
+这个基础框架的代码使用未定义指令钩子（hooks）来支持模拟。如果指令存在，它也允许在硬件中启用该指令。
+
+模拟模式可通过写 sysctl 节点（/proc/sys/abi）来控制。
+不同的执行方式及 sysctl 节点的相应值，解释如下：
+
+* Undef（未定义）
+  值： 0
+  产生未定义指令终止异常。它是那些构架中已废弃的指令，如 SWP，的默认处理方式。
+
+* Emulate（模拟）
+  值： 1
+  使用软件模拟方式。为解决软件迁移问题，这种模拟指令模式的使用是被跟踪的，并会发出速率限制警告。
+  它是那些构架中正在被淘汰的指令，如 CP15 barriers（隔离指令），的默认处理方式。
+
+* Hardware Execution（硬件执行）
+  值： 2
+  虽然标记为正在被淘汰，但一些实现可能提供硬件执行这些指令的使能/禁用操作。
+  使用硬件执行一般会有更好的性能，但将无法收集运行时对正被淘汰指令的使用统计数据。
+
+默认执行模式依赖于指令在构架中状态。正在被淘汰的指令应该以模拟（Emulate）作为默认模式，
+而已废弃的指令必须默认使用未定义（Undef）模式
+
+注意：指令模拟可能无法应对所有情况。更多详情请参考单独的指令注释。
+
+受支持的遗留指令
+-------------
+* SWP{B}
+节点: /proc/sys/abi/swp
+状态: 已废弃
+默认执行方式: Undef (0)
+
+* CP15 Barriers
+节点: /proc/sys/abi/cp15_barrier
+状态: 正被淘汰，不推荐使用
+默认执行方式: Emulate (1)
+
+* SETEND
+节点: /proc/sys/abi/setend
+状态: 正被淘汰，不推荐使用
+默认执行方式: Emulate (1)*
+注：为了使能这个特性，系统中的所有 CPU 必须在 EL0 支持混合字节序。
+如果一个新的 CPU （不支持混合字节序） 在使能这个特性后被热插入系统，
+在应用中可能会出现不可预期的结果。
diff --git a/Documentation/translations/zh_CN/arch/arm64/memory.txt b/Documentation/translations/zh_CN/arch/arm64/memory.txt
new file mode 100644
index 0000000000000..c6962e9cb9f8f
--- /dev/null
+++ b/Documentation/translations/zh_CN/arch/arm64/memory.txt
@@ -0,0 +1,114 @@
+Chinese translated version of Documentation/arch/arm64/memory.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Catalin Marinas <catalin.marinas@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+---------------------------------------------------------------------
+Documentation/arch/arm64/memory.rst 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+本文翻译提交时的 Git 检出点为： bc465aa9d045feb0e13b4a8f32cc33c1943f62d6
+
+英文版维护者： Catalin Marinas <catalin.marinas@arm.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
+
+以下为正文
+---------------------------------------------------------------------
+		     Linux 在 AArch64 中的内存布局
+		     ===========================
+
+作者: Catalin Marinas <catalin.marinas@arm.com>
+
+本文档描述 AArch64 Linux 内核所使用的虚拟内存布局。此构架可以实现
+页大小为 4KB 的 4 级转换表和页大小为 64KB 的 3 级转换表。
+
+AArch64 Linux 使用 3 级或 4 级转换表，其页大小配置为 4KB，对于用户和内核
+分别都有 39-bit (512GB) 或 48-bit (256TB) 的虚拟地址空间。
+对于页大小为 64KB的配置，仅使用 2 级转换表，有 42-bit (4TB) 的虚拟地址空间，但内存布局相同。
+
+用户地址空间的 63:48 位为 0，而内核地址空间的相应位为 1。TTBRx 的
+选择由虚拟地址的 63 位给出。swapper_pg_dir 仅包含内核（全局）映射，
+而用户 pgd 仅包含用户（非全局）映射。swapper_pg_dir 地址被写入
+TTBR1 中，且从不写入 TTBR0。
+
+
+AArch64 Linux 在页大小为 4KB，并使用 3 级转换表时的内存布局：
+
+起始地址			结束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	0000007fffffffff	 512GB		用户空间
+ffffff8000000000	ffffffffffffffff	 512GB		内核空间
+
+
+AArch64 Linux 在页大小为 4KB，并使用 4 级转换表时的内存布局：
+
+起始地址			结束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	0000ffffffffffff	 256TB		用户空间
+ffff000000000000	ffffffffffffffff	 256TB		内核空间
+
+
+AArch64 Linux 在页大小为 64KB，并使用 2 级转换表时的内存布局：
+
+起始地址			结束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	000003ffffffffff	   4TB		用户空间
+fffffc0000000000	ffffffffffffffff	   4TB		内核空间
+
+
+AArch64 Linux 在页大小为 64KB，并使用 3 级转换表时的内存布局：
+
+起始地址			结束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	0000ffffffffffff	 256TB		用户空间
+ffff000000000000	ffffffffffffffff	 256TB		内核空间
+
+
+更详细的内核虚拟内存布局，请参阅内核启动信息。
+
+
+4KB 页大小的转换表查找：
+
++--------+--------+--------+--------+--------+--------+--------+--------+
+|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
++--------+--------+--------+--------+--------+--------+--------+--------+
+ |                 |         |         |         |         |
+ |                 |         |         |         |         v
+ |                 |         |         |         |   [11:0]  页内偏移
+ |                 |         |         |         +-> [20:12] L3 索引
+ |                 |         |         +-----------> [29:21] L2 索引
+ |                 |         +---------------------> [38:30] L1 索引
+ |                 +-------------------------------> [47:39] L0 索引
+ +-------------------------------------------------> [63] TTBR0/1
+
+
+64KB 页大小的转换表查找：
+
++--------+--------+--------+--------+--------+--------+--------+--------+
+|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
++--------+--------+--------+--------+--------+--------+--------+--------+
+ |                 |    |               |              |
+ |                 |    |               |              v
+ |                 |    |               |            [15:0]  页内偏移
+ |                 |    |               +----------> [28:16] L3 索引
+ |                 |    +--------------------------> [41:29] L2 索引
+ |                 +-------------------------------> [47:42] L1 索引
+ +-------------------------------------------------> [63] TTBR0/1
+
+
+当使用 KVM 时, 管理程序（hypervisor）在 EL2 中通过相对内核虚拟地址的
+一个固定偏移来映射内核页（内核虚拟地址的高 24 位设为零）:
+
+起始地址			结束地址			大小		用途
+-----------------------------------------------------------------------
+0000004000000000	0000007fffffffff	 256GB		在 HYP 中映射的内核对象
diff --git a/Documentation/translations/zh_CN/arch/arm64/perf.rst b/Documentation/translations/zh_CN/arch/arm64/perf.rst
new file mode 100644
index 0000000000000..6be72704e6591
--- /dev/null
+++ b/Documentation/translations/zh_CN/arch/arm64/perf.rst
@@ -0,0 +1,86 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../../disclaimer-zh_CN.rst
+
+:Original: :ref:`Documentation/arch/arm64/perf.rst <perf_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+
+=============
+Perf 事件属性
+=============
+
+:作者: Andrew Murray <andrew.murray@arm.com>
+:日期: 2019-03-06
+
+exclude_user
+------------
+
+该属性排除用户空间。
+
+用户空间始终运行在 EL0，因此该属性将排除 EL0。
+
+
+exclude_kernel
+--------------
+
+该属性排除内核空间。
+
+打开 VHE 时内核运行在 EL2，不打开 VHE 时内核运行在 EL1。客户机
+内核总是运行在 EL1。
+
+对于宿主机，该属性排除 EL1 和 VHE 上的 EL2。
+
+对于客户机，该属性排除 EL1。请注意客户机从来不会运行在 EL2。
+
+
+exclude_hv
+----------
+
+该属性排除虚拟机监控器。
+
+对于 VHE 宿主机该属性将被忽略，此时我们认为宿主机内核是虚拟机监
+控器。
+
+对于 non-VHE 宿主机该属性将排除 EL2，因为虚拟机监控器运行在 EL2
+的任何代码主要用于客户机和宿主机的切换。
+
+对于客户机该属性无效。请注意客户机从来不会运行在 EL2。
+
+
+exclude_host / exclude_guest
+----------------------------
+
+这些属性分别排除了 KVM 宿主机和客户机。
+
+KVM 宿主机可能运行在 EL0（用户空间），EL1（non-VHE 内核）和
+EL2（VHE 内核 或 non-VHE 虚拟机监控器）。
+
+KVM 客户机可能运行在 EL0（用户空间）和 EL1（内核）。
+
+由于宿主机和客户机之间重叠的异常级别，我们不能仅仅依靠 PMU 的硬件异
+常过滤机制-因此我们必须启用/禁用对于客户机进入和退出的计数。而这在
+VHE 和 non-VHE 系统上表现不同。
+
+对于 non-VHE 系统的 exclude_host 属性排除 EL2 - 在进入和退出客户
+机时，我们会根据 exclude_host 和 exclude_guest 属性在适当的情况下
+禁用/启用该事件。
+
+对于 VHE 系统的 exclude_guest 属性排除 EL1，而对其中的 exclude_host
+属性同时排除 EL0，EL2。在进入和退出客户机时，我们会适当地根据
+exclude_host 和 exclude_guest 属性包括/排除 EL0。
+
+以上声明也适用于在 not-VHE 客户机使用这些属性时，但是请注意客户机从
+来不会运行在 EL2。
+
+
+准确性
+------
+
+在 non-VHE 宿主机上，我们在 EL2 进入/退出宿主机/客户机的切换时启用/
+关闭计数器 -但是在启用/禁用计数器和进入/退出客户机之间存在一段延时。
+对于 exclude_host， 我们可以通过过滤 EL2 消除在客户机进入/退出边界
+上用于计数客户机事件的宿主机事件计数器。但是当使用 !exclude_hv 时，
+在客户机进入/退出有一个小的停电窗口无法捕获到宿主机的事件。
+
+在 VHE 系统没有停电窗口。
diff --git a/Documentation/translations/zh_CN/arch/arm64/silicon-errata.txt b/Documentation/translations/zh_CN/arch/arm64/silicon-errata.txt
new file mode 100644
index 0000000000000..f4767ffdd61de
--- /dev/null
+++ b/Documentation/translations/zh_CN/arch/arm64/silicon-errata.txt
@@ -0,0 +1,74 @@
+Chinese translated version of Documentation/arch/arm64/silicon-errata.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+M:	Will Deacon <will.deacon@arm.com>
+zh_CN:	Fu Wei <wefu@redhat.com>
+C:	1926e54f115725a9248d0c4c65c22acaf94de4c4
+---------------------------------------------------------------------
+Documentation/arch/arm64/silicon-errata.rst 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Will Deacon <will.deacon@arm.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
+本文翻译提交时的 Git 检出点为： 1926e54f115725a9248d0c4c65c22acaf94de4c4
+
+以下为正文
+---------------------------------------------------------------------
+                芯片勘误和软件补救措施
+                ==================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2015年11月27日
+
+一个不幸的现实：硬件经常带有一些所谓的“瑕疵（errata）”，导致其在
+某些特定情况下会违背构架定义的行为。就基于 ARM 的硬件而言，这些瑕疵
+大体可分为以下几类：
+
+  A 类：无可行补救措施的严重缺陷。
+  B 类：有可接受的补救措施的重大或严重缺陷。
+  C 类：在正常操作中不会显现的小瑕疵。
+
+更多资讯，请在 infocenter.arm.com （需注册）中查阅“软件开发者勘误
+笔记”（“Software Developers Errata Notice”）文档。
+
+对于 Linux 而言，B 类缺陷可能需要操作系统的某些特别处理。例如，避免
+一个特殊的代码序列，或是以一种特定的方式配置处理器。在某种不太常见的
+情况下，为将 A 类缺陷当作 C 类处理，可能需要用类似的手段。这些手段被
+统称为“软件补救措施”，且仅在少数情况需要（例如，那些需要一个运行在
+非安全异常级的补救措施 *并且* 能被 Linux 触发的情况）。
+
+对于尚在讨论中的可能对未受瑕疵影响的系统产生干扰的软件补救措施，有一个
+相应的内核配置（Kconfig）选项被加在 “内核特性（Kernel Features）”->
+“基于可选方法框架的 ARM 瑕疵补救措施（ARM errata workarounds via
+the alternatives framework）"。这些选项被默认开启，若探测到受影响的CPU，
+补丁将在运行时被使用。至于对系统运行影响较小的补救措施，内核配置选项
+并不存在，且代码以某种规避瑕疵的方式被构造（带注释为宜）。
+
+这种做法对于在任意内核源代码树中准确地判断出哪个瑕疵已被软件方法所补救
+稍微有点麻烦，所以在 Linux 内核中此文件作为软件补救措施的注册表，
+并将在新的软件补救措施被提交和向后移植（backported）到稳定内核时被更新。
+
+| 实现者         | 受影响的组件    | 勘误编号        | 内核配置                |
++----------------+-----------------+-----------------+-------------------------+
+| ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319    |
+| ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319    |
+| ARM            | Cortex-A53      | #824069         | ARM64_ERRATUM_824069    |
+| ARM            | Cortex-A53      | #819472         | ARM64_ERRATUM_819472    |
+| ARM            | Cortex-A53      | #845719         | ARM64_ERRATUM_845719    |
+| ARM            | Cortex-A53      | #843419         | ARM64_ERRATUM_843419    |
+| ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075    |
+| ARM            | Cortex-A57      | #852523         | N/A                     |
+| ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220    |
+|                |                 |                 |                         |
+| Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375    |
+| Cavium         | ThunderX GICv3  | #23154          | CAVIUM_ERRATUM_23154    |
diff --git a/Documentation/translations/zh_CN/arch/arm64/tagged-pointers.txt b/Documentation/translations/zh_CN/arch/arm64/tagged-pointers.txt
new file mode 100644
index 0000000000000..27577c3c5e3f6
--- /dev/null
+++ b/Documentation/translations/zh_CN/arch/arm64/tagged-pointers.txt
@@ -0,0 +1,52 @@
+Chinese translated version of Documentation/arch/arm64/tagged-pointers.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Will Deacon <will.deacon@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+---------------------------------------------------------------------
+Documentation/arch/arm64/tagged-pointers.rst 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Will Deacon <will.deacon@arm.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
+
+以下为正文
+---------------------------------------------------------------------
+		Linux 在 AArch64 中带标记的虚拟地址
+		=================================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2013 年 06 月 12 日
+
+本文档简述了在 AArch64 地址转换系统中提供的带标记的虚拟地址及其在
+AArch64 Linux 中的潜在用途。
+
+内核提供的地址转换表配置使通过 TTBR0 完成的虚拟地址转换（即用户空间
+映射），其虚拟地址的最高 8 位（63:56）会被转换硬件所忽略。这种机制
+让这些位可供应用程序自由使用，其注意事项如下：
+
+	(1) 内核要求所有传递到 EL1 的用户空间地址带有 0x00 标记。
+	    这意味着任何携带用户空间虚拟地址的系统调用（syscall）
+	    参数 *必须* 在陷入内核前使它们的最高字节被清零。
+
+	(2) 非零标记在传递信号时不被保存。这意味着在应用程序中利用了
+	    标记的信号处理函数无法依赖 siginfo_t 的用户空间虚拟
+	    地址所携带的包含其内部域信息的标记。此规则的一个例外是
+	    当信号是在调试观察点的异常处理程序中产生的，此时标记的
+	    信息将被保存。
+
+	(3) 当使用带标记的指针时需特别留心，因为仅对两个虚拟地址
+	    的高字节，C 编译器很可能无法判断它们是不同的。
+
+此构架会阻止对带标记的 PC 指针的利用，因此在异常返回时，其高字节
+将被设置成一个为 “55” 的扩展符。
diff --git a/Documentation/translations/zh_CN/arch/index.rst b/Documentation/translations/zh_CN/arch/index.rst
index 908ea131bb1c8..6fa0cb6710090 100644
--- a/Documentation/translations/zh_CN/arch/index.rst
+++ b/Documentation/translations/zh_CN/arch/index.rst
@@ -9,7 +9,7 @@
    :maxdepth: 2
 
    ../mips/index
-   ../arm64/index
+   arm64/index
    ../riscv/index
    openrisc/index
    parisc/index
diff --git a/Documentation/translations/zh_CN/arm/Booting b/Documentation/translations/zh_CN/arm/Booting
deleted file mode 100644
index 5ecea07678939..0000000000000
--- a/Documentation/translations/zh_CN/arm/Booting
+++ /dev/null
@@ -1,175 +0,0 @@
-Chinese translated version of Documentation/arm/booting.rst
-
-If you have any comment or update to the content, please contact the
-original document maintainer directly.  However, if you have a problem
-communicating in English you can also ask the Chinese maintainer for
-help.  Contact the Chinese maintainer if this translation is outdated
-or if there is a problem with the translation.
-
-Maintainer: Russell King <linux@arm.linux.org.uk>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
----------------------------------------------------------------------
-Documentation/arm/booting.rst 的中文翻译
-
-如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
-交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
-译存在问题，请联系中文版维护者。
-
-英文版维护者： Russell King <linux@arm.linux.org.uk>
-中文版维护者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版校译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-
-以下为正文
----------------------------------------------------------------------
-
-			启动 ARM Linux
-			==============
-
-作者：Russell King
-日期：2002年5月18日
-
-以下文档适用于 2.4.18-rmk6 及以上版本。
-
-为了启动 ARM Linux，你需要一个引导装载程序（boot loader），
-它是一个在主内核启动前运行的一个小程序。引导装载程序需要初始化各种
-设备，并最终调用 Linux 内核，将信息传递给内核。
-
-从本质上讲，引导装载程序应提供（至少）以下功能：
-
-1、设置和初始化 RAM。
-2、初始化一个串口。
-3、检测机器的类型（machine type）。
-4、设置内核标签列表（tagged list）。
-5、调用内核映像。
-
-
-1、设置和初始化 RAM
--------------------
-
-现有的引导加载程序:		强制
-新开发的引导加载程序:		强制
-
-引导装载程序应该找到并初始化系统中所有内核用于保持系统变量数据的 RAM。
-这个操作的执行是设备依赖的。（它可能使用内部算法来自动定位和计算所有
-RAM，或可能使用对这个设备已知的 RAM 信息，还可能使用任何引导装载程序
-设计者想到的匹配方法。）
-
-
-2、初始化一个串口
------------------------------
-
-现有的引导加载程序:		可选、建议
-新开发的引导加载程序:		可选、建议
-
-引导加载程序应该初始化并使能一个目标板上的串口。这允许内核串口驱动
-自动检测哪个串口用于内核控制台。(一般用于调试或与目标板通信。)
-
-作为替代方案，引导加载程序也可以通过标签列表传递相关的'console='
-选项给内核以指定某个串口，而串口数据格式的选项在以下文档中描述：
-
-       Documentation/admin-guide/kernel-parameters.rst。
-
-
-3、检测机器类型
---------------------------
-
-现有的引导加载程序:		可选
-新开发的引导加载程序:		强制
-
-引导加载程序应该通过某些方式检测自身所处的机器类型。这是一个硬件
-代码或通过查看所连接的硬件用某些算法得到，这些超出了本文档的范围。
-引导加载程序最终必须能提供一个 MACH_TYPE_xxx 值给内核。
-(详见 linux/arch/arm/tools/mach-types )。
-
-4、设置启动数据
-------------------
-
-现有的引导加载程序:		可选、强烈建议
-新开发的引导加载程序:		强制
-
-引导加载程序必须提供标签列表或者 dtb 映像以传递配置数据给内核。启动
-数据的物理地址通过寄存器 r2 传递给内核。
-
-4a、设置内核标签列表
---------------------------------
-
-bootloader 必须创建和初始化内核标签列表。一个有效的标签列表以
-ATAG_CORE 标签开始，并以 ATAG_NONE 标签结束。ATAG_CORE 标签可以是
-空的，也可以是非空。一个空 ATAG_CORE 标签其 size 域设置为
-‘2’(0x00000002)。ATAG_NONE 标签的 size 域必须设置为零。
-
-在列表中可以保存任意数量的标签。对于一个重复的标签是追加到之前标签
-所携带的信息之后，还是会覆盖原来的信息，是未定义的。某些标签的行为
-是前者，其他是后者。
-
-bootloader 必须传递一个系统内存的位置和最小值，以及根文件系统位置。
-因此，最小的标签列表如下所示：
-
-		+-----------+
-基地址 ->	| ATAG_CORE |  |
-		+-----------+  |
-		| ATAG_MEM  |  | 地址增长方向
-		+-----------+  |
-		| ATAG_NONE |  |
-		+-----------+  v
-
-标签列表应该保存在系统的 RAM 中。
-
-标签列表必须置于内核自解压和 initrd'bootp' 程序都不会覆盖的内存区。
-建议放在 RAM 的头 16KiB 中。
-
-4b、设置设备树
--------------------------
-
-bootloader 必须以 64bit 地址对齐的形式加载一个设备树映像(dtb)到系统
-RAM 中，并用启动数据初始化它。dtb 格式在文档
-https://www.devicetree.org/specifications/ 中。内核将会在
-dtb 物理地址处查找 dtb 魔数值（0xd00dfeed），以确定 dtb 是否已经代替
-标签列表被传递进来。
-
-bootloader 必须传递一个系统内存的位置和最小值，以及根文件系统位置。
-dtb 必须置于内核自解压不会覆盖的内存区。建议将其放置于 RAM 的头 16KiB
-中。但是不可将其放置于“0”物理地址处，因为内核认为：r2 中为 0，意味着
-没有标签列表和 dtb 传递过来。
-
-5、调用内核映像
----------------------------
-
-现有的引导加载程序:		强制
-新开发的引导加载程序:		强制
-
-调用内核映像 zImage 有两个选择。如果 zImge 保存在 flash 中，且是为了
-在 flash 中直接运行而被正确链接的。这样引导加载程序就可以在 flash 中
-直接调用 zImage。
-
-zImage 也可以被放在系统 RAM（任意位置）中被调用。注意：内核使用映像
-基地址的前 16KB RAM 空间来保存页表。建议将映像置于 RAM 的 32KB 处。
-
-对于以上任意一种情况，都必须符合以下启动状态：
-
-- 停止所有 DMA 设备，这样内存数据就不会因为虚假网络包或磁盘数据而被破坏。
-  这可能可以节省你许多的调试时间。
-
-- CPU 寄存器配置
-  r0 = 0，
-  r1 = （在上面 3 中获取的）机器类型码。
-  r2 = 标签列表在系统 RAM 中的物理地址，或
-       设备树块(dtb)在系统 RAM 中的物理地址
-
-- CPU 模式
-  所有形式的中断必须被禁止 (IRQs 和 FIQs)
-  CPU 必须处于 SVC 模式。(对于 Angel 调试有特例存在)
-
-- 缓存，MMUs
-  MMU 必须关闭。
-  指令缓存开启或关闭都可以。
-  数据缓存必须关闭。
-
-- 引导加载程序应该通过直接跳转到内核映像的第一条指令来调用内核映像。
-
-  对于支持 ARM 指令集的 CPU，跳入内核入口时必须处在 ARM 状态，即使
-  对于 Thumb-2 内核也是如此。
-
-  对于仅支持 Thumb 指令集的 CPU，比如 Cortex-M 系列的 CPU，跳入
-  内核入口时必须处于 Thumb 状态。
diff --git a/Documentation/translations/zh_CN/arm/kernel_user_helpers.txt b/Documentation/translations/zh_CN/arm/kernel_user_helpers.txt
deleted file mode 100644
index 99af4363984db..0000000000000
--- a/Documentation/translations/zh_CN/arm/kernel_user_helpers.txt
+++ /dev/null
@@ -1,284 +0,0 @@
-Chinese translated version of Documentation/arm/kernel_user_helpers.rst
-
-If you have any comment or update to the content, please contact the
-original document maintainer directly.  However, if you have a problem
-communicating in English you can also ask the Chinese maintainer for
-help.  Contact the Chinese maintainer if this translation is outdated
-or if there is a problem with the translation.
-
-Maintainer: Nicolas Pitre <nicolas.pitre@linaro.org>
-		Dave Martin <dave.martin@linaro.org>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
----------------------------------------------------------------------
-Documentation/arm/kernel_user_helpers.rst 的中文翻译
-
-如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
-交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
-译存在问题，请联系中文版维护者。
-英文版维护者： Nicolas Pitre <nicolas.pitre@linaro.org>
-		Dave Martin <dave.martin@linaro.org>
-中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版校译者： 宋冬生 Dongsheng Song <dongshneg.song@gmail.com>
-		傅炜 Fu Wei <tekkamanninja@gmail.com>
-
-
-以下为正文
----------------------------------------------------------------------
-内核提供的用户空间辅助代码
-=========================
-
-在内核内存空间的固定地址处，有一个由内核提供并可从用户空间访问的代码
-段。它用于向用户空间提供因在许多 ARM CPU 中未实现的特性和/或指令而需
-内核提供帮助的某些操作。这些代码直接在用户模式下执行的想法是为了获得
-最佳效率，但那些与内核计数器联系过于紧密的部分，则被留给了用户库实现。
-事实上，此代码甚至可能因不同的 CPU 而异，这取决于其可用的指令集或它
-是否为 SMP 系统。换句话说，内核保留在不作出警告的情况下根据需要更改
-这些代码的权利。只有本文档描述的入口及其结果是保证稳定的。
-
-这与完全成熟的 VDSO 实现不同（但两者并不冲突），尽管如此，VDSO 可阻止
-某些通过常量高效跳转到那些代码段的汇编技巧。且由于那些代码段在返回用户
-代码前仅使用少量的代码周期，则一个 VDSO 间接远程调用将会在这些简单的
-操作上增加一个可测量的开销。
-
-在对那些拥有原生支持的新型处理器进行代码优化时，仅在已为其他操作使用
-了类似的新增指令，而导致二进制结果已与早期 ARM 处理器不兼容的情况下，
-用户空间才应绕过这些辅助代码，并在内联函数中实现这些操作（无论是通过
-编译器在代码中直接放置，还是作为库函数调用实现的一部分）。也就是说，
-如果你编译的代码不会为了其他目的使用新指令，则不要仅为了避免使用这些
-内核辅助代码，导致二进制程序无法在早期处理器上运行。
-
-新的辅助代码可能随着时间的推移而增加，所以新内核中的某些辅助代码在旧
-内核中可能不存在。因此，程序必须在对任何辅助代码调用假设是安全之前，
-检测 __kuser_helper_version 的值（见下文）。理想情况下，这种检测应该
-只在进程启动时执行一次；如果内核版本不支持所需辅助代码，则该进程可尽早
-中止执行。
-
-kuser_helper_version
---------------------
-
-位置:	0xffff0ffc
-
-参考声明:
-
-  extern int32_t __kuser_helper_version;
-
-定义:
-
-  这个区域包含了当前运行内核实现的辅助代码版本号。用户空间可以通过读
-  取此版本号以确定特定的辅助代码是否存在。
-
-使用范例:
-
-#define __kuser_helper_version (*(int32_t *)0xffff0ffc)
-
-void check_kuser_version(void)
-{
-	if (__kuser_helper_version < 2) {
-		fprintf(stderr, "can't do atomic operations, kernel too old\n");
-		abort();
-	}
-}
-
-注意:
-
-  用户空间可以假设这个域的值不会在任何单个进程的生存期内改变。也就
-  是说，这个域可以仅在库的初始化阶段或进程启动阶段读取一次。
-
-kuser_get_tls
--------------
-
-位置:	0xffff0fe0
-
-参考原型:
-
-  void * __kuser_get_tls(void);
-
-输入:
-
-  lr = 返回地址
-
-输出:
-
-  r0 = TLS 值
-
-被篡改的寄存器:
-
-  无
-
-定义:
-
-  获取之前通过 __ARM_NR_set_tls 系统调用设置的 TLS 值。
-
-使用范例:
-
-typedef void * (__kuser_get_tls_t)(void);
-#define __kuser_get_tls (*(__kuser_get_tls_t *)0xffff0fe0)
-
-void foo()
-{
-	void *tls = __kuser_get_tls();
-	printf("TLS = %p\n", tls);
-}
-
-注意:
-
-  - 仅在 __kuser_helper_version >= 1 时，此辅助代码存在
-    （从内核版本 2.6.12 开始）。
-
-kuser_cmpxchg
--------------
-
-位置:	0xffff0fc0
-
-参考原型:
-
-  int __kuser_cmpxchg(int32_t oldval, int32_t newval, volatile int32_t *ptr);
-
-输入:
-
-  r0 = oldval
-  r1 = newval
-  r2 = ptr
-  lr = 返回地址
-
-输出:
-
-  r0 = 成功代码 (零或非零)
-  C flag = 如果 r0 == 0 则置 1，如果 r0 != 0 则清零。
-
-被篡改的寄存器:
-
-  r3, ip, flags
-
-定义:
-
-  仅在 *ptr 为 oldval 时原子保存 newval 于 *ptr 中。
-  如果 *ptr 被改变，则返回值为零，否则为非零值。
-  如果 *ptr 被改变，则 C flag 也会被置 1，以实现调用代码中的汇编
-  优化。
-
-使用范例:
-
-typedef int (__kuser_cmpxchg_t)(int oldval, int newval, volatile int *ptr);
-#define __kuser_cmpxchg (*(__kuser_cmpxchg_t *)0xffff0fc0)
-
-int atomic_add(volatile int *ptr, int val)
-{
-	int old, new;
-
-	do {
-		old = *ptr;
-		new = old + val;
-	} while(__kuser_cmpxchg(old, new, ptr));
-
-	return new;
-}
-
-注意:
-
-  - 这个例程已根据需要包含了内存屏障。
-
-  - 仅在 __kuser_helper_version >= 2 时，此辅助代码存在
-    （从内核版本 2.6.12 开始）。
-
-kuser_memory_barrier
---------------------
-
-位置:	0xffff0fa0
-
-参考原型:
-
-  void __kuser_memory_barrier(void);
-
-输入:
-
-  lr = 返回地址
-
-输出:
-
-  无
-
-被篡改的寄存器:
-
-  无
-
-定义:
-
-  应用于任何需要内存屏障以防止手动数据修改带来的一致性问题，以及
-  __kuser_cmpxchg 中。
-
-使用范例:
-
-typedef void (__kuser_dmb_t)(void);
-#define __kuser_dmb (*(__kuser_dmb_t *)0xffff0fa0)
-
-注意:
-
-  - 仅在 __kuser_helper_version >= 3 时，此辅助代码存在
-    （从内核版本 2.6.15 开始）。
-
-kuser_cmpxchg64
----------------
-
-位置:	0xffff0f60
-
-参考原型:
-
-  int __kuser_cmpxchg64(const int64_t *oldval,
-                        const int64_t *newval,
-                        volatile int64_t *ptr);
-
-输入:
-
-  r0 = 指向 oldval
-  r1 = 指向 newval
-  r2 = 指向目标值
-  lr = 返回地址
-
-输出:
-
-  r0 = 成功代码 (零或非零)
-  C flag = 如果 r0 == 0 则置 1，如果 r0 != 0 则清零。
-
-被篡改的寄存器:
-
-  r3, lr, flags
-
-定义:
-
-  仅在 *ptr 等于 *oldval 指向的 64 位值时，原子保存 *newval
-  指向的 64 位值于 *ptr 中。如果 *ptr 被改变，则返回值为零，
-  否则为非零值。
-
-  如果 *ptr 被改变，则 C flag 也会被置 1，以实现调用代码中的汇编
-  优化。
-
-使用范例:
-
-typedef int (__kuser_cmpxchg64_t)(const int64_t *oldval,
-                                  const int64_t *newval,
-                                  volatile int64_t *ptr);
-#define __kuser_cmpxchg64 (*(__kuser_cmpxchg64_t *)0xffff0f60)
-
-int64_t atomic_add64(volatile int64_t *ptr, int64_t val)
-{
-	int64_t old, new;
-
-	do {
-		old = *ptr;
-		new = old + val;
-	} while(__kuser_cmpxchg64(&old, &new, ptr));
-
-	return new;
-}
-
-注意:
-
-  - 这个例程已根据需要包含了内存屏障。
-
-  - 由于这个过程的代码长度（此辅助代码跨越 2 个常规的 kuser “槽”），
-    因此 0xffff0f80 不被作为有效的入口点。
-
-  - 仅在 __kuser_helper_version >= 5 时，此辅助代码存在
-    （从内核版本 3.1 开始）。
diff --git a/Documentation/translations/zh_CN/arm64/amu.rst b/Documentation/translations/zh_CN/arm64/amu.rst
deleted file mode 100644
index ab7180f91394f..0000000000000
--- a/Documentation/translations/zh_CN/arm64/amu.rst
+++ /dev/null
@@ -1,100 +0,0 @@
-.. include:: ../disclaimer-zh_CN.rst
-
-:Original: :ref:`Documentation/arm64/amu.rst <amu_index>`
-
-Translator: Bailu Lin <bailu.lin@vivo.com>
-
-==================================
-AArch64 Linux 中扩展的活动监控单元
-==================================
-
-作者: Ionela Voinescu <ionela.voinescu@arm.com>
-
-日期: 2019-09-10
-
-本文档简要描述了 AArch64 Linux 支持的活动监控单元的规范。
-
-
-架构总述
---------
-
-活动监控是 ARMv8.4 CPU 架构引入的一个可选扩展特性。
-
-活动监控单元(在每个 CPU 中实现)为系统管理提供了性能计数器。既可以通
-过系统寄存器的方式访问计数器，同时也支持外部内存映射的方式访问计数器。
-
-AMUv1 架构实现了一个由4个固定的64位事件计数器组成的计数器组。
-
-  - CPU 周期计数器：同 CPU 的频率增长
-  - 常量计数器：同固定的系统时钟频率增长
-  - 淘汰指令计数器: 同每次架构指令执行增长
-  - 内存停顿周期计数器：计算由在时钟域内的最后一级缓存中未命中而引起
-    的指令调度停顿周期数
-
-当处于 WFI 或者 WFE 状态时，计数器不会增长。
-
-AMU 架构提供了一个高达16位的事件计数器空间，未来新的 AMU 版本中可能
-用它来实现新增的事件计数器。
-
-另外，AMUv1 实现了一个多达16个64位辅助事件计数器的计数器组。
-
-冷复位时所有的计数器会清零。
-
-
-基本支持
---------
-
-内核可以安全地运行在支持 AMU 和不支持 AMU 的 CPU 组合中。
-因此，当配置 CONFIG_ARM64_AMU_EXTN 后我们无条件使能后续
-(secondary or hotplugged) CPU 检测和使用这个特性。
-
-当在 CPU 上检测到该特性时，我们会标记为特性可用但是不能保证计数器的功能，
-仅表明有扩展属性。
-
-固件(代码运行在高异常级别，例如 arm-tf )需支持以下功能：
-
- - 提供低异常级别(EL2 和 EL1)访问 AMU 寄存器的能力。
- - 使能计数器。如果未使能，它的值应为 0。
- - 在从电源关闭状态启动 CPU 前或后保存或者恢复计数器。
-
-当使用使能了该特性的内核启动但固件损坏时，访问计数器寄存器可能会遭遇
-panic 或者死锁。即使未发现这些症状，计数器寄存器返回的数据结果并不一
-定能反映真实情况。通常，计数器会返回 0，表明他们未被使能。
-
-如果固件没有提供适当的支持最好关闭 CONFIG_ARM64_AMU_EXTN。
-值得注意的是，出于安全原因，不要绕过 AMUSERRENR_EL0 设置而捕获从
-EL0(用户空间) 访问 EL1(内核空间)。 因此，固件应该确保访问 AMU寄存器
-不会困在 EL2或EL3。
-
-AMUv1 的固定计数器可以通过如下系统寄存器访问：
-
- - SYS_AMEVCNTR0_CORE_EL0
- - SYS_AMEVCNTR0_CONST_EL0
- - SYS_AMEVCNTR0_INST_RET_EL0
- - SYS_AMEVCNTR0_MEM_STALL_EL0
-
-特定辅助计数器可以通过 SYS_AMEVCNTR1_EL0(n) 访问，其中n介于0到15。
-
-详细信息定义在目录：arch/arm64/include/asm/sysreg.h。
-
-
-用户空间访问
-------------
-
-由于以下原因，当前禁止从用户空间访问 AMU 的寄存器：
-
-  - 安全因数：可能会暴露处于安全模式执行的代码信息。
-  - 意愿：AMU 是用于系统管理的。
-
-同样，该功能对用户空间不可见。
-
-
-虚拟化
-------
-
-由于以下原因，当前禁止从 KVM 客户端的用户空间(EL0)和内核空间(EL1)
-访问 AMU 的寄存器：
-
-  - 安全因数：可能会暴露给其他客户端或主机端执行的代码信息。
-
-任何试图访问 AMU 寄存器的行为都会触发一个注册在客户端的未定义异常。
diff --git a/Documentation/translations/zh_CN/arm64/booting.txt b/Documentation/translations/zh_CN/arm64/booting.txt
deleted file mode 100644
index 5b0164132c712..0000000000000
--- a/Documentation/translations/zh_CN/arm64/booting.txt
+++ /dev/null
@@ -1,246 +0,0 @@
-Chinese translated version of Documentation/arm64/booting.rst
-
-If you have any comment or update to the content, please contact the
-original document maintainer directly.  However, if you have a problem
-communicating in English you can also ask the Chinese maintainer for
-help.  Contact the Chinese maintainer if this translation is outdated
-or if there is a problem with the translation.
-
-M:	Will Deacon <will.deacon@arm.com>
-zh_CN:	Fu Wei <wefu@redhat.com>
-C:	55f058e7574c3615dea4615573a19bdb258696c6
----------------------------------------------------------------------
-Documentation/arm64/booting.rst 的中文翻译
-
-如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
-交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
-译存在问题，请联系中文版维护者。
-
-英文版维护者： Will Deacon <will.deacon@arm.com>
-中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
-中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
-中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
-本文翻译提交时的 Git 检出点为： 55f058e7574c3615dea4615573a19bdb258696c6
-
-以下为正文
----------------------------------------------------------------------
-			启动 AArch64 Linux
-			==================
-
-作者: Will Deacon <will.deacon@arm.com>
-日期: 2012 年 09 月 07 日
-
-本文档基于 Russell King 的 ARM 启动文档，且适用于所有公开发布的
-AArch64 Linux 内核代码。
-
-AArch64 异常模型由多个异常级（EL0 - EL3）组成，对于 EL0 和 EL1 异常级
-有对应的安全和非安全模式。EL2 是系统管理级，且仅存在于非安全模式下。
-EL3 是最高特权级，且仅存在于安全模式下。
-
-基于本文档的目的，我们将简单地使用‘引导装载程序’（‘boot loader’）
-这个术语来定义在将控制权交给 Linux 内核前 CPU 上执行的所有软件。
-这可能包含安全监控和系统管理代码，或者它可能只是一些用于准备最小启动
-环境的指令。
-
-基本上，引导装载程序（至少）应实现以下操作：
-
-1、设置和初始化 RAM
-2、设置设备树数据
-3、解压内核映像
-4、调用内核映像
-
-
-1、设置和初始化 RAM
------------------
-
-必要性: 强制
-
-引导装载程序应该找到并初始化系统中所有内核用于保持系统变量数据的 RAM。
-这个操作的执行方式因设备而异。（它可能使用内部算法来自动定位和计算所有
-RAM，或可能使用对这个设备已知的 RAM 信息，还可能是引导装载程序设计者
-想到的任何合适的方法。）
-
-
-2、设置设备树数据
----------------
-
-必要性: 强制
-
-设备树数据块（dtb）必须 8 字节对齐，且大小不能超过 2MB。由于设备树
-数据块将在使能缓存的情况下以 2MB 粒度被映射，故其不能被置于必须以特定
-属性映射的2M区域内。
-
-注： v4.2 之前的版本同时要求设备树数据块被置于从内核映像以下
-text_offset 字节处算起第一个 512MB 内。
-
-3、解压内核映像
--------------
-
-必要性: 可选
-
-AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内核映像文件
-（比如 Image.gz），则需要通过引导装载程序（使用 gzip 等）来进行解压。
-若引导装载程序没有实现这个功能，就要使用非压缩内核映像文件。
-
-
-4、调用内核映像
--------------
-
-必要性: 强制
-
-已解压的内核映像包含一个 64 字节的头，内容如下：
-
-  u32 code0;			/* 可执行代码 */
-  u32 code1;			/* 可执行代码 */
-  u64 text_offset;		/* 映像装载偏移，小端模式 */
-  u64 image_size;		/* 映像实际大小, 小端模式 */
-  u64 flags;			/* 内核旗标, 小端模式 *
-  u64 res2	= 0;		/* 保留 */
-  u64 res3	= 0;		/* 保留 */
-  u64 res4	= 0;		/* 保留 */
-  u32 magic	= 0x644d5241;	/* 魔数, 小端, "ARM\x64" */
-  u32 res5;			/* 保留 （用于 PE COFF 偏移） */
-
-
-映像头注释：
-
-- 自 v3.17 起，除非另有说明，所有域都是小端模式。
-
-- code0/code1 负责跳转到 stext.
-
-- 当通过 EFI 启动时， 最初 code0/code1 被跳过。
-  res5 是到 PE 文件头的偏移，而 PE 文件头含有 EFI 的启动入口点
-  （efi_stub_entry）。当 stub 代码完成了它的使命，它会跳转到 code0
-  继续正常的启动流程。
-
-- v3.17 之前，未明确指定 text_offset 的字节序。此时，image_size 为零，
-  且 text_offset 依照内核字节序为 0x80000。
-  当 image_size 非零，text_offset 为小端模式且是有效值，应被引导加载
-  程序使用。当 image_size 为零，text_offset 可假定为 0x80000。
-
-- flags 域 (v3.17 引入) 为 64 位小端模式，其编码如下：
-  位 0: 	内核字节序。 1 表示大端模式，0 表示小端模式。
-  位 1-2:	内核页大小。
-			0 - 未指定。
-			1 - 4K
-			2 - 16K
-			3 - 64K
-  位 3:		内核物理位置
-			0 - 2MB 对齐基址应尽量靠近内存起始处，因为
-			    其基址以下的内存无法通过线性映射访问
-			1 - 2MB 对齐基址可以在物理内存的任意位置
-  位 4-63:	保留。
-
-- 当 image_size 为零时，引导装载程序应试图在内核映像末尾之后尽可能
-  多地保留空闲内存供内核直接使用。对内存空间的需求量因所选定的内核
-  特性而异, 并无实际限制。
-
-内核映像必须被放置在任意一个可用系统内存 2MB 对齐基址的 text_offset
-字节处，并从该处被调用。2MB 对齐基址和内核映像起始地址之间的区域对于
-内核来说没有特殊意义，且可能被用于其他目的。
-从映像起始地址算起，最少必须准备 image_size 字节的空闲内存供内核使用。
-注： v4.6 之前的版本无法使用内核映像物理偏移以下的内存，所以当时建议
-将映像尽量放置在靠近系统内存起始的地方。
-
-任何提供给内核的内存（甚至在映像起始地址之前），若未从内核中标记为保留
-(如在设备树（dtb）的 memreserve 区域），都将被认为对内核是可用。
-
-在跳转入内核前，必须符合以下状态：
-
-- 停止所有 DMA 设备，这样内存数据就不会因为虚假网络包或磁盘数据而
-  被破坏。这可能可以节省你许多的调试时间。
-
-- 主 CPU 通用寄存器设置
-  x0 = 系统 RAM 中设备树数据块（dtb）的物理地址。
-  x1 = 0 (保留，将来可能使用)
-  x2 = 0 (保留，将来可能使用)
-  x3 = 0 (保留，将来可能使用)
-
-- CPU 模式
-  所有形式的中断必须在 PSTATE.DAIF 中被屏蔽（Debug、SError、IRQ
-  和 FIQ）。
-  CPU 必须处于 EL2（推荐，可访问虚拟化扩展）或非安全 EL1 模式下。
-
-- 高速缓存、MMU
-  MMU 必须关闭。
-  指令缓存开启或关闭皆可。
-  已载入的内核映像的相应内存区必须被清理，以达到缓存一致性点（PoC）。
-  当存在系统缓存或其他使能缓存的一致性主控器时，通常需使用虚拟地址
-  维护其缓存，而非 set/way 操作。
-  遵从通过虚拟地址操作维护构架缓存的系统缓存必须被配置，并可以被使能。
-  而不通过虚拟地址操作维护构架缓存的系统缓存（不推荐），必须被配置且
-  禁用。
-
-  *译者注：对于 PoC 以及缓存相关内容，请参考 ARMv8 构架参考手册
-   ARM DDI 0487A
-
-- 架构计时器
-  CNTFRQ 必须设定为计时器的频率，且 CNTVOFF 必须设定为对所有 CPU
-  都一致的值。如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的
-  EL1PCTEN (bit 0) 必须置位。
-
-- 一致性
-  通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。
-  这可能要根据具体实现来定义初始化过程，以使能每个CPU上对维护操作的
-  接收。
-
-- 系统寄存器
-  在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件
-  在一个更高的异常级别下初始化，以防止在 未知 状态下运行。
-
-  对于拥有 GICv3 中断控制器并以 v3 模式运行的系统：
-  - 如果 EL3 存在：
-    ICC_SRE_EL3.Enable (位 3) 必须初始化为 0b1。
-    ICC_SRE_EL3.SRE (位 0) 必须初始化为 0b1。
-  - 若内核运行在 EL1：
-    ICC_SRE_EL2.Enable (位 3) 必须初始化为 0b1。
-    ICC_SRE_EL2.SRE (位 0) 必须初始化为 0b1。
-  - 设备树（DT）或 ACPI 表必须描述一个 GICv3 中断控制器。
-
-  对于拥有 GICv3 中断控制器并以兼容（v2）模式运行的系统：
-  - 如果 EL3 存在：
-    ICC_SRE_EL3.SRE (位 0) 必须初始化为 0b0。
-  - 若内核运行在 EL1：
-    ICC_SRE_EL2.SRE (位 0) 必须初始化为 0b0。
-  - 设备树（DT）或 ACPI 表必须描述一个 GICv2 中断控制器。
-
-以上对于 CPU 模式、高速缓存、MMU、架构计时器、一致性、系统寄存器的
-必要条件描述适用于所有 CPU。所有 CPU 必须在同一异常级别跳入内核。
-
-引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口：
-
-- 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树
-  数据块必须在每个 CPU 节点中包含一个 ‘enable-method’ 属性，所
-  支持的 enable-method 请见下文。
-
-  引导装载程序必须生成这些设备树属性，并在跳入内核入口之前将其插入
-  数据块。
-
-- enable-method 为 “spin-table” 的 CPU 必须在它们的 CPU
-  节点中包含一个 ‘cpu-release-addr’ 属性。这个属性标识了一个
-  64 位自然对齐且初始化为零的内存位置。
-
-  这些 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
-  给内核）中自旋于内核之外，轮询它们的 cpu-release-addr 位置（必须
-  包含在保留区中）。可通过插入 wfe 指令来降低忙循环开销，而主 CPU 将
-  发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值
-  时，CPU 必须跳入此值所指向的地址。此值为一个单独的 64 位小端值，
-  因此 CPU 须在跳转前将所读取的值转换为其本身的端模式。
-
-- enable-method 为 “psci” 的 CPU 保持在内核外（比如，在
-  memory 节点中描述为内核空间的内存区外，或在通过设备树 /memreserve/
-  域中描述为内核保留区的空间中）。内核将会发起在 ARM 文档（编号
-  ARM DEN 0022A：用于 ARM 上的电源状态协调接口系统软件）中描述的
-  CPU_ON 调用来将 CPU 带入内核。
-
-  *译者注: ARM DEN 0022A 已更新到 ARM DEN 0022C。
-
-  设备树必须包含一个 ‘psci’ 节点，请参考以下文档：
-  Documentation/devicetree/bindings/arm/psci.yaml
-
-
-- 辅助 CPU 通用寄存器设置
-  x0 = 0 (保留，将来可能使用)
-  x1 = 0 (保留，将来可能使用)
-  x2 = 0 (保留，将来可能使用)
-  x3 = 0 (保留，将来可能使用)
diff --git a/Documentation/translations/zh_CN/arm64/elf_hwcaps.rst b/Documentation/translations/zh_CN/arm64/elf_hwcaps.rst
deleted file mode 100644
index 9aa4637eac979..0000000000000
--- a/Documentation/translations/zh_CN/arm64/elf_hwcaps.rst
+++ /dev/null
@@ -1,240 +0,0 @@
-.. include:: ../disclaimer-zh_CN.rst
-
-:Original: :ref:`Documentation/arm64/elf_hwcaps.rst <elf_hwcaps_index>`
-
-Translator: Bailu Lin <bailu.lin@vivo.com>
-
-================
-ARM64 ELF hwcaps
-================
-
-这篇文档描述了 arm64 ELF hwcaps 的用法和语义。
-
-
-1. 简介
--------
-
-有些硬件或软件功能仅在某些 CPU 实现上和/或在具体某个内核配置上可用，但
-对于处于 EL0 的用户空间代码没有可用的架构发现机制。内核通过在辅助向量表
-公开一组称为 hwcaps 的标志而把这些功能暴露给用户空间。
-
-用户空间软件可以通过获取辅助向量的 AT_HWCAP 或 AT_HWCAP2 条目来测试功能，
-并测试是否设置了相关标志，例如::
-
-	bool floating_point_is_present(void)
-	{
-		unsigned long hwcaps = getauxval(AT_HWCAP);
-		if (hwcaps & HWCAP_FP)
-			return true;
-
-		return false;
-	}
-
-如果软件依赖于 hwcap 描述的功能，在尝试使用该功能前则应检查相关的 hwcap
-标志以验证该功能是否存在。
-
-不能通过其他方式探查这些功能。当一个功能不可用时，尝试使用它可能导致不可
-预测的行为，并且无法保证能确切的知道该功能不可用，例如 SIGILL。
-
-
-2. Hwcaps 的说明
-----------------
-
-大多数 hwcaps 旨在说明通过架构 ID 寄存器(处于 EL0 的用户空间代码无法访问)
-描述的功能的存在。这些 hwcap 通过 ID 寄存器字段定义，并且应根据 ARM 体系
-结构参考手册（ARM ARM）中定义的字段来解释说明。
-
-这些 hwcaps 以下面的形式描述::
-
-    idreg.field == val 表示有某个功能。
-
-当 idreg.field 中有 val 时，hwcaps 表示 ARM ARM 定义的功能是有效的，但是
-并不是说要完全和 val 相等，也不是说 idreg.field 描述的其他功能就是缺失的。
-
-其他 hwcaps 可能表明无法仅由 ID 寄存器描述的功能的存在。这些 hwcaps 可能
-没有被 ID 寄存器描述，需要参考其他文档。
-
-
-3. AT_HWCAP 中揭示的 hwcaps
----------------------------
-
-HWCAP_FP
-    ID_AA64PFR0_EL1.FP == 0b0000 表示有此功能。
-
-HWCAP_ASIMD
-    ID_AA64PFR0_EL1.AdvSIMD == 0b0000 表示有此功能。
-
-HWCAP_EVTSTRM
-    通用计时器频率配置为大约100KHz以生成事件。
-
-HWCAP_AES
-    ID_AA64ISAR0_EL1.AES == 0b0001 表示有此功能。
-
-HWCAP_PMULL
-    ID_AA64ISAR0_EL1.AES == 0b0010 表示有此功能。
-
-HWCAP_SHA1
-    ID_AA64ISAR0_EL1.SHA1 == 0b0001 表示有此功能。
-
-HWCAP_SHA2
-    ID_AA64ISAR0_EL1.SHA2 == 0b0001 表示有此功能。
-
-HWCAP_CRC32
-    ID_AA64ISAR0_EL1.CRC32 == 0b0001 表示有此功能。
-
-HWCAP_ATOMICS
-    ID_AA64ISAR0_EL1.Atomic == 0b0010 表示有此功能。
-
-HWCAP_FPHP
-    ID_AA64PFR0_EL1.FP == 0b0001 表示有此功能。
-
-HWCAP_ASIMDHP
-    ID_AA64PFR0_EL1.AdvSIMD == 0b0001 表示有此功能。
-
-HWCAP_CPUID
-    根据 Documentation/arm64/cpu-feature-registers.rst 描述，EL0 可以访问
-    某些 ID 寄存器。
-
-    这些 ID 寄存器可能表示功能的可用性。
-
-HWCAP_ASIMDRDM
-    ID_AA64ISAR0_EL1.RDM == 0b0001 表示有此功能。
-
-HWCAP_JSCVT
-    ID_AA64ISAR1_EL1.JSCVT == 0b0001 表示有此功能。
-
-HWCAP_FCMA
-    ID_AA64ISAR1_EL1.FCMA == 0b0001 表示有此功能。
-
-HWCAP_LRCPC
-    ID_AA64ISAR1_EL1.LRCPC == 0b0001 表示有此功能。
-
-HWCAP_DCPOP
-    ID_AA64ISAR1_EL1.DPB == 0b0001 表示有此功能。
-
-HWCAP_SHA3
-    ID_AA64ISAR0_EL1.SHA3 == 0b0001 表示有此功能。
-
-HWCAP_SM3
-    ID_AA64ISAR0_EL1.SM3 == 0b0001 表示有此功能。
-
-HWCAP_SM4
-    ID_AA64ISAR0_EL1.SM4 == 0b0001 表示有此功能。
-
-HWCAP_ASIMDDP
-    ID_AA64ISAR0_EL1.DP == 0b0001 表示有此功能。
-
-HWCAP_SHA512
-    ID_AA64ISAR0_EL1.SHA2 == 0b0010 表示有此功能。
-
-HWCAP_SVE
-    ID_AA64PFR0_EL1.SVE == 0b0001 表示有此功能。
-
-HWCAP_ASIMDFHM
-    ID_AA64ISAR0_EL1.FHM == 0b0001 表示有此功能。
-
-HWCAP_DIT
-    ID_AA64PFR0_EL1.DIT == 0b0001 表示有此功能。
-
-HWCAP_USCAT
-    ID_AA64MMFR2_EL1.AT == 0b0001 表示有此功能。
-
-HWCAP_ILRCPC
-    ID_AA64ISAR1_EL1.LRCPC == 0b0010 表示有此功能。
-
-HWCAP_FLAGM
-    ID_AA64ISAR0_EL1.TS == 0b0001 表示有此功能。
-
-HWCAP_SSBS
-    ID_AA64PFR1_EL1.SSBS == 0b0010 表示有此功能。
-
-HWCAP_SB
-    ID_AA64ISAR1_EL1.SB == 0b0001 表示有此功能。
-
-HWCAP_PACA
-    如 Documentation/arm64/pointer-authentication.rst 所描述，
-    ID_AA64ISAR1_EL1.APA == 0b0001 或 ID_AA64ISAR1_EL1.API == 0b0001
-    表示有此功能。
-
-HWCAP_PACG
-    如 Documentation/arm64/pointer-authentication.rst 所描述，
-    ID_AA64ISAR1_EL1.GPA == 0b0001 或 ID_AA64ISAR1_EL1.GPI == 0b0001
-    表示有此功能。
-
-HWCAP2_DCPODP
-
-    ID_AA64ISAR1_EL1.DPB == 0b0010 表示有此功能。
-
-HWCAP2_SVE2
-
-    ID_AA64ZFR0_EL1.SVEVer == 0b0001 表示有此功能。
-
-HWCAP2_SVEAES
-
-    ID_AA64ZFR0_EL1.AES == 0b0001 表示有此功能。
-
-HWCAP2_SVEPMULL
-
-    ID_AA64ZFR0_EL1.AES == 0b0010 表示有此功能。
-
-HWCAP2_SVEBITPERM
-
-    ID_AA64ZFR0_EL1.BitPerm == 0b0001 表示有此功能。
-
-HWCAP2_SVESHA3
-
-    ID_AA64ZFR0_EL1.SHA3 == 0b0001 表示有此功能。
-
-HWCAP2_SVESM4
-
-    ID_AA64ZFR0_EL1.SM4 == 0b0001 表示有此功能。
-
-HWCAP2_FLAGM2
-
-    ID_AA64ISAR0_EL1.TS == 0b0010 表示有此功能。
-
-HWCAP2_FRINT
-
-    ID_AA64ISAR1_EL1.FRINTTS == 0b0001 表示有此功能。
-
-HWCAP2_SVEI8MM
-
-    ID_AA64ZFR0_EL1.I8MM == 0b0001 表示有此功能。
-
-HWCAP2_SVEF32MM
-
-    ID_AA64ZFR0_EL1.F32MM == 0b0001 表示有此功能。
-
-HWCAP2_SVEF64MM
-
-    ID_AA64ZFR0_EL1.F64MM == 0b0001 表示有此功能。
-
-HWCAP2_SVEBF16
-
-    ID_AA64ZFR0_EL1.BF16 == 0b0001 表示有此功能。
-
-HWCAP2_I8MM
-
-    ID_AA64ISAR1_EL1.I8MM == 0b0001 表示有此功能。
-
-HWCAP2_BF16
-
-    ID_AA64ISAR1_EL1.BF16 == 0b0001 表示有此功能。
-
-HWCAP2_DGH
-
-    ID_AA64ISAR1_EL1.DGH == 0b0001 表示有此功能。
-
-HWCAP2_RNG
-
-    ID_AA64ISAR0_EL1.RNDR == 0b0001 表示有此功能。
-
-HWCAP2_BTI
-
-    ID_AA64PFR0_EL1.BT == 0b0001 表示有此功能。
-
-
-4. 未使用的 AT_HWCAP 位
------------------------
-
-为了与用户空间交互，内核保证 AT_HWCAP 的第62、63位将始终返回0。
diff --git a/Documentation/translations/zh_CN/arm64/hugetlbpage.rst b/Documentation/translations/zh_CN/arm64/hugetlbpage.rst
deleted file mode 100644
index 13304d269d0b9..0000000000000
--- a/Documentation/translations/zh_CN/arm64/hugetlbpage.rst
+++ /dev/null
@@ -1,45 +0,0 @@
-.. include:: ../disclaimer-zh_CN.rst
-
-:Original: :ref:`Documentation/arm64/hugetlbpage.rst <hugetlbpage_index>`
-
-Translator: Bailu Lin <bailu.lin@vivo.com>
-
-=====================
-ARM64中的 HugeTLBpage
-=====================
-
-大页依靠有效利用 TLBs 来提高地址翻译的性能。这取决于以下
-两点 -
-
-  - 大页的大小
-  - TLBs 支持的条目大小
-
-ARM64 接口支持2种大页方式。
-
-1) pud/pmd 级别的块映射
------------------------
-
-这是常规大页，他们的 pmd 或 pud 页面表条目指向一个内存块。
-不管 TLB 中支持的条目大小如何，块映射可以减少翻译大页地址
-所需遍历的页表深度。
-
-2) 使用连续位
--------------
-
-架构中转换页表条目(D4.5.3, ARM DDI 0487C.a)中提供一个连续
-位告诉 MMU 这个条目是一个连续条目集的一员，它可以被缓存在单
-个 TLB 条目中。
-
-在 Linux 中连续位用来增加 pmd 和 pte(最后一级)级别映射的大
-小。受支持的连续页表条目数量因页面大小和页表级别而异。
-
-
-支持以下大页尺寸配置 -
-
-  ====== ========   ====    ========    ===
-  -      CONT PTE    PMD    CONT PMD    PUD
-  ====== ========   ====    ========    ===
-  4K:         64K     2M         32M     1G
-  16K:         2M    32M          1G
-  64K:         2M   512M         16G
-  ====== ========   ====    ========    ===
diff --git a/Documentation/translations/zh_CN/arm64/index.rst b/Documentation/translations/zh_CN/arm64/index.rst
deleted file mode 100644
index 57dc5de5ccc5a..0000000000000
--- a/Documentation/translations/zh_CN/arm64/index.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-.. include:: ../disclaimer-zh_CN.rst
-
-:Original: :ref:`Documentation/arm64/index.rst <arm64_index>`
-:Translator: Bailu Lin <bailu.lin@vivo.com>
-
-.. _cn_arm64_index:
-
-
-==========
-ARM64 架构
-==========
-
-.. toctree::
-    :maxdepth: 2
-
-    amu
-    hugetlbpage
-    perf
-    elf_hwcaps
diff --git a/Documentation/translations/zh_CN/arm64/legacy_instructions.txt b/Documentation/translations/zh_CN/arm64/legacy_instructions.txt
deleted file mode 100644
index e295cf75f606e..0000000000000
--- a/Documentation/translations/zh_CN/arm64/legacy_instructions.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Chinese translated version of Documentation/arm64/legacy_instructions.rst
-
-If you have any comment or update to the content, please contact the
-original document maintainer directly.  However, if you have a problem
-communicating in English you can also ask the Chinese maintainer for
-help.  Contact the Chinese maintainer if this translation is outdated
-or if there is a problem with the translation.
-
-Maintainer: Punit Agrawal <punit.agrawal@arm.com>
-            Suzuki K. Poulose <suzuki.poulose@arm.com>
-Chinese maintainer: Fu Wei <wefu@redhat.com>
----------------------------------------------------------------------
-Documentation/arm64/legacy_instructions.rst 的中文翻译
-
-如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
-交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
-译存在问题，请联系中文版维护者。
-
-本文翻译提交时的 Git 检出点为： bc465aa9d045feb0e13b4a8f32cc33c1943f62d6
-
-英文版维护者： Punit Agrawal <punit.agrawal@arm.com>
-            Suzuki K. Poulose <suzuki.poulose@arm.com>
-中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
-中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
-中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
-
-以下为正文
----------------------------------------------------------------------
-Linux 内核在 arm64 上的移植提供了一个基础框架，以支持构架中正在被淘汰或已废弃指令的模拟执行。
-这个基础框架的代码使用未定义指令钩子（hooks）来支持模拟。如果指令存在，它也允许在硬件中启用该指令。
-
-模拟模式可通过写 sysctl 节点（/proc/sys/abi）来控制。
-不同的执行方式及 sysctl 节点的相应值，解释如下：
-
-* Undef（未定义）
-  值： 0
-  产生未定义指令终止异常。它是那些构架中已废弃的指令，如 SWP，的默认处理方式。
-
-* Emulate（模拟）
-  值： 1
-  使用软件模拟方式。为解决软件迁移问题，这种模拟指令模式的使用是被跟踪的，并会发出速率限制警告。
-  它是那些构架中正在被淘汰的指令，如 CP15 barriers（隔离指令），的默认处理方式。
-
-* Hardware Execution（硬件执行）
-  值： 2
-  虽然标记为正在被淘汰，但一些实现可能提供硬件执行这些指令的使能/禁用操作。
-  使用硬件执行一般会有更好的性能，但将无法收集运行时对正被淘汰指令的使用统计数据。
-
-默认执行模式依赖于指令在构架中状态。正在被淘汰的指令应该以模拟（Emulate）作为默认模式，
-而已废弃的指令必须默认使用未定义（Undef）模式
-
-注意：指令模拟可能无法应对所有情况。更多详情请参考单独的指令注释。
-
-受支持的遗留指令
--------------
-* SWP{B}
-节点: /proc/sys/abi/swp
-状态: 已废弃
-默认执行方式: Undef (0)
-
-* CP15 Barriers
-节点: /proc/sys/abi/cp15_barrier
-状态: 正被淘汰，不推荐使用
-默认执行方式: Emulate (1)
-
-* SETEND
-节点: /proc/sys/abi/setend
-状态: 正被淘汰，不推荐使用
-默认执行方式: Emulate (1)*
-注：为了使能这个特性，系统中的所有 CPU 必须在 EL0 支持混合字节序。
-如果一个新的 CPU （不支持混合字节序） 在使能这个特性后被热插入系统，
-在应用中可能会出现不可预期的结果。
diff --git a/Documentation/translations/zh_CN/arm64/memory.txt b/Documentation/translations/zh_CN/arm64/memory.txt
deleted file mode 100644
index be20f8228b913..0000000000000
--- a/Documentation/translations/zh_CN/arm64/memory.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-Chinese translated version of Documentation/arm64/memory.rst
-
-If you have any comment or update to the content, please contact the
-original document maintainer directly.  However, if you have a problem
-communicating in English you can also ask the Chinese maintainer for
-help.  Contact the Chinese maintainer if this translation is outdated
-or if there is a problem with the translation.
-
-Maintainer: Catalin Marinas <catalin.marinas@arm.com>
-Chinese maintainer: Fu Wei <wefu@redhat.com>
----------------------------------------------------------------------
-Documentation/arm64/memory.rst 的中文翻译
-
-如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
-交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
-译存在问题，请联系中文版维护者。
-
-本文翻译提交时的 Git 检出点为： bc465aa9d045feb0e13b4a8f32cc33c1943f62d6
-
-英文版维护者： Catalin Marinas <catalin.marinas@arm.com>
-中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
-中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
-中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
-
-以下为正文
----------------------------------------------------------------------
-		     Linux 在 AArch64 中的内存布局
-		     ===========================
-
-作者: Catalin Marinas <catalin.marinas@arm.com>
-
-本文档描述 AArch64 Linux 内核所使用的虚拟内存布局。此构架可以实现
-页大小为 4KB 的 4 级转换表和页大小为 64KB 的 3 级转换表。
-
-AArch64 Linux 使用 3 级或 4 级转换表，其页大小配置为 4KB，对于用户和内核
-分别都有 39-bit (512GB) 或 48-bit (256TB) 的虚拟地址空间。
-对于页大小为 64KB的配置，仅使用 2 级转换表，有 42-bit (4TB) 的虚拟地址空间，但内存布局相同。
-
-用户地址空间的 63:48 位为 0，而内核地址空间的相应位为 1。TTBRx 的
-选择由虚拟地址的 63 位给出。swapper_pg_dir 仅包含内核（全局）映射，
-而用户 pgd 仅包含用户（非全局）映射。swapper_pg_dir 地址被写入
-TTBR1 中，且从不写入 TTBR0。
-
-
-AArch64 Linux 在页大小为 4KB，并使用 3 级转换表时的内存布局：
-
-起始地址			结束地址			大小		用途
------------------------------------------------------------------------
-0000000000000000	0000007fffffffff	 512GB		用户空间
-ffffff8000000000	ffffffffffffffff	 512GB		内核空间
-
-
-AArch64 Linux 在页大小为 4KB，并使用 4 级转换表时的内存布局：
-
-起始地址			结束地址			大小		用途
------------------------------------------------------------------------
-0000000000000000	0000ffffffffffff	 256TB		用户空间
-ffff000000000000	ffffffffffffffff	 256TB		内核空间
-
-
-AArch64 Linux 在页大小为 64KB，并使用 2 级转换表时的内存布局：
-
-起始地址			结束地址			大小		用途
------------------------------------------------------------------------
-0000000000000000	000003ffffffffff	   4TB		用户空间
-fffffc0000000000	ffffffffffffffff	   4TB		内核空间
-
-
-AArch64 Linux 在页大小为 64KB，并使用 3 级转换表时的内存布局：
-
-起始地址			结束地址			大小		用途
------------------------------------------------------------------------
-0000000000000000	0000ffffffffffff	 256TB		用户空间
-ffff000000000000	ffffffffffffffff	 256TB		内核空间
-
-
-更详细的内核虚拟内存布局，请参阅内核启动信息。
-
-
-4KB 页大小的转换表查找：
-
-+--------+--------+--------+--------+--------+--------+--------+--------+
-|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
-+--------+--------+--------+--------+--------+--------+--------+--------+
- |                 |         |         |         |         |
- |                 |         |         |         |         v
- |                 |         |         |         |   [11:0]  页内偏移
- |                 |         |         |         +-> [20:12] L3 索引
- |                 |         |         +-----------> [29:21] L2 索引
- |                 |         +---------------------> [38:30] L1 索引
- |                 +-------------------------------> [47:39] L0 索引
- +-------------------------------------------------> [63] TTBR0/1
-
-
-64KB 页大小的转换表查找：
-
-+--------+--------+--------+--------+--------+--------+--------+--------+
-|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
-+--------+--------+--------+--------+--------+--------+--------+--------+
- |                 |    |               |              |
- |                 |    |               |              v
- |                 |    |               |            [15:0]  页内偏移
- |                 |    |               +----------> [28:16] L3 索引
- |                 |    +--------------------------> [41:29] L2 索引
- |                 +-------------------------------> [47:42] L1 索引
- +-------------------------------------------------> [63] TTBR0/1
-
-
-当使用 KVM 时, 管理程序（hypervisor）在 EL2 中通过相对内核虚拟地址的
-一个固定偏移来映射内核页（内核虚拟地址的高 24 位设为零）:
-
-起始地址			结束地址			大小		用途
------------------------------------------------------------------------
-0000004000000000	0000007fffffffff	 256GB		在 HYP 中映射的内核对象
diff --git a/Documentation/translations/zh_CN/arm64/perf.rst b/Documentation/translations/zh_CN/arm64/perf.rst
deleted file mode 100644
index 9bf21d73f4d1c..0000000000000
--- a/Documentation/translations/zh_CN/arm64/perf.rst
+++ /dev/null
@@ -1,86 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: ../disclaimer-zh_CN.rst
-
-:Original: :ref:`Documentation/arm64/perf.rst <perf_index>`
-
-Translator: Bailu Lin <bailu.lin@vivo.com>
-
-=============
-Perf 事件属性
-=============
-
-:作者: Andrew Murray <andrew.murray@arm.com>
-:日期: 2019-03-06
-
-exclude_user
-------------
-
-该属性排除用户空间。
-
-用户空间始终运行在 EL0，因此该属性将排除 EL0。
-
-
-exclude_kernel
---------------
-
-该属性排除内核空间。
-
-打开 VHE 时内核运行在 EL2，不打开 VHE 时内核运行在 EL1。客户机
-内核总是运行在 EL1。
-
-对于宿主机，该属性排除 EL1 和 VHE 上的 EL2。
-
-对于客户机，该属性排除 EL1。请注意客户机从来不会运行在 EL2。
-
-
-exclude_hv
-----------
-
-该属性排除虚拟机监控器。
-
-对于 VHE 宿主机该属性将被忽略，此时我们认为宿主机内核是虚拟机监
-控器。
-
-对于 non-VHE 宿主机该属性将排除 EL2，因为虚拟机监控器运行在 EL2
-的任何代码主要用于客户机和宿主机的切换。
-
-对于客户机该属性无效。请注意客户机从来不会运行在 EL2。
-
-
-exclude_host / exclude_guest
-----------------------------
-
-这些属性分别排除了 KVM 宿主机和客户机。
-
-KVM 宿主机可能运行在 EL0（用户空间），EL1（non-VHE 内核）和
-EL2（VHE 内核 或 non-VHE 虚拟机监控器）。
-
-KVM 客户机可能运行在 EL0（用户空间）和 EL1（内核）。
-
-由于宿主机和客户机之间重叠的异常级别，我们不能仅仅依靠 PMU 的硬件异
-常过滤机制-因此我们必须启用/禁用对于客户机进入和退出的计数。而这在
-VHE 和 non-VHE 系统上表现不同。
-
-对于 non-VHE 系统的 exclude_host 属性排除 EL2 - 在进入和退出客户
-机时，我们会根据 exclude_host 和 exclude_guest 属性在适当的情况下
-禁用/启用该事件。
-
-对于 VHE 系统的 exclude_guest 属性排除 EL1，而对其中的 exclude_host
-属性同时排除 EL0，EL2。在进入和退出客户机时，我们会适当地根据
-exclude_host 和 exclude_guest 属性包括/排除 EL0。
-
-以上声明也适用于在 not-VHE 客户机使用这些属性时，但是请注意客户机从
-来不会运行在 EL2。
-
-
-准确性
-------
-
-在 non-VHE 宿主机上，我们在 EL2 进入/退出宿主机/客户机的切换时启用/
-关闭计数器 -但是在启用/禁用计数器和进入/退出客户机之间存在一段延时。
-对于 exclude_host， 我们可以通过过滤 EL2 消除在客户机进入/退出边界
-上用于计数客户机事件的宿主机事件计数器。但是当使用 !exclude_hv 时，
-在客户机进入/退出有一个小的停电窗口无法捕获到宿主机的事件。
-
-在 VHE 系统没有停电窗口。
diff --git a/Documentation/translations/zh_CN/arm64/silicon-errata.txt b/Documentation/translations/zh_CN/arm64/silicon-errata.txt
deleted file mode 100644
index 440c59ac7dce8..0000000000000
--- a/Documentation/translations/zh_CN/arm64/silicon-errata.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-Chinese translated version of Documentation/arm64/silicon-errata.rst
-
-If you have any comment or update to the content, please contact the
-original document maintainer directly.  However, if you have a problem
-communicating in English you can also ask the Chinese maintainer for
-help.  Contact the Chinese maintainer if this translation is outdated
-or if there is a problem with the translation.
-
-M:	Will Deacon <will.deacon@arm.com>
-zh_CN:	Fu Wei <wefu@redhat.com>
-C:	1926e54f115725a9248d0c4c65c22acaf94de4c4
----------------------------------------------------------------------
-Documentation/arm64/silicon-errata.rst 的中文翻译
-
-如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
-交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
-译存在问题，请联系中文版维护者。
-
-英文版维护者： Will Deacon <will.deacon@arm.com>
-中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
-中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
-中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
-本文翻译提交时的 Git 检出点为： 1926e54f115725a9248d0c4c65c22acaf94de4c4
-
-以下为正文
----------------------------------------------------------------------
-                芯片勘误和软件补救措施
-                ==================
-
-作者: Will Deacon <will.deacon@arm.com>
-日期: 2015年11月27日
-
-一个不幸的现实：硬件经常带有一些所谓的“瑕疵（errata）”，导致其在
-某些特定情况下会违背构架定义的行为。就基于 ARM 的硬件而言，这些瑕疵
-大体可分为以下几类：
-
-  A 类：无可行补救措施的严重缺陷。
-  B 类：有可接受的补救措施的重大或严重缺陷。
-  C 类：在正常操作中不会显现的小瑕疵。
-
-更多资讯，请在 infocenter.arm.com （需注册）中查阅“软件开发者勘误
-笔记”（“Software Developers Errata Notice”）文档。
-
-对于 Linux 而言，B 类缺陷可能需要操作系统的某些特别处理。例如，避免
-一个特殊的代码序列，或是以一种特定的方式配置处理器。在某种不太常见的
-情况下，为将 A 类缺陷当作 C 类处理，可能需要用类似的手段。这些手段被
-统称为“软件补救措施”，且仅在少数情况需要（例如，那些需要一个运行在
-非安全异常级的补救措施 *并且* 能被 Linux 触发的情况）。
-
-对于尚在讨论中的可能对未受瑕疵影响的系统产生干扰的软件补救措施，有一个
-相应的内核配置（Kconfig）选项被加在 “内核特性（Kernel Features）”->
-“基于可选方法框架的 ARM 瑕疵补救措施（ARM errata workarounds via
-the alternatives framework）"。这些选项被默认开启，若探测到受影响的CPU，
-补丁将在运行时被使用。至于对系统运行影响较小的补救措施，内核配置选项
-并不存在，且代码以某种规避瑕疵的方式被构造（带注释为宜）。
-
-这种做法对于在任意内核源代码树中准确地判断出哪个瑕疵已被软件方法所补救
-稍微有点麻烦，所以在 Linux 内核中此文件作为软件补救措施的注册表，
-并将在新的软件补救措施被提交和向后移植（backported）到稳定内核时被更新。
-
-| 实现者         | 受影响的组件    | 勘误编号        | 内核配置                |
-+----------------+-----------------+-----------------+-------------------------+
-| ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319    |
-| ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319    |
-| ARM            | Cortex-A53      | #824069         | ARM64_ERRATUM_824069    |
-| ARM            | Cortex-A53      | #819472         | ARM64_ERRATUM_819472    |
-| ARM            | Cortex-A53      | #845719         | ARM64_ERRATUM_845719    |
-| ARM            | Cortex-A53      | #843419         | ARM64_ERRATUM_843419    |
-| ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075    |
-| ARM            | Cortex-A57      | #852523         | N/A                     |
-| ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220    |
-|                |                 |                 |                         |
-| Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375    |
-| Cavium         | ThunderX GICv3  | #23154          | CAVIUM_ERRATUM_23154    |
diff --git a/Documentation/translations/zh_CN/arm64/tagged-pointers.txt b/Documentation/translations/zh_CN/arm64/tagged-pointers.txt
deleted file mode 100644
index 77ac3548a16d1..0000000000000
--- a/Documentation/translations/zh_CN/arm64/tagged-pointers.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-Chinese translated version of Documentation/arm64/tagged-pointers.rst
-
-If you have any comment or update to the content, please contact the
-original document maintainer directly.  However, if you have a problem
-communicating in English you can also ask the Chinese maintainer for
-help.  Contact the Chinese maintainer if this translation is outdated
-or if there is a problem with the translation.
-
-Maintainer: Will Deacon <will.deacon@arm.com>
-Chinese maintainer: Fu Wei <wefu@redhat.com>
----------------------------------------------------------------------
-Documentation/arm64/tagged-pointers.rst 的中文翻译
-
-如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
-交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
-译存在问题，请联系中文版维护者。
-
-英文版维护者： Will Deacon <will.deacon@arm.com>
-中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
-中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
-中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
-
-以下为正文
----------------------------------------------------------------------
-		Linux 在 AArch64 中带标记的虚拟地址
-		=================================
-
-作者: Will Deacon <will.deacon@arm.com>
-日期: 2013 年 06 月 12 日
-
-本文档简述了在 AArch64 地址转换系统中提供的带标记的虚拟地址及其在
-AArch64 Linux 中的潜在用途。
-
-内核提供的地址转换表配置使通过 TTBR0 完成的虚拟地址转换（即用户空间
-映射），其虚拟地址的最高 8 位（63:56）会被转换硬件所忽略。这种机制
-让这些位可供应用程序自由使用，其注意事项如下：
-
-	(1) 内核要求所有传递到 EL1 的用户空间地址带有 0x00 标记。
-	    这意味着任何携带用户空间虚拟地址的系统调用（syscall）
-	    参数 *必须* 在陷入内核前使它们的最高字节被清零。
-
-	(2) 非零标记在传递信号时不被保存。这意味着在应用程序中利用了
-	    标记的信号处理函数无法依赖 siginfo_t 的用户空间虚拟
-	    地址所携带的包含其内部域信息的标记。此规则的一个例外是
-	    当信号是在调试观察点的异常处理程序中产生的，此时标记的
-	    信息将被保存。
-
-	(3) 当使用带标记的指针时需特别留心，因为仅对两个虚拟地址
-	    的高字节，C 编译器很可能无法判断它们是不同的。
-
-此构架会阻止对带标记的 PC 指针的利用，因此在异常返回时，其高字节
-将被设置成一个为 “55” 的扩展符。
diff --git a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
index 84ce2322fdbac..aeccff7771709 100644
--- a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
+++ b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
@@ -153,8 +153,7 @@ get/set(获取/设置)函数调用没法返回错误,且有可能是配置错误
 大多数 GPIO 控制器可以通过内存读/写指令来访问。这些指令不会休眠,可以
 安全地在硬(非线程)中断例程和类似的上下文中完成。
 
-对于那些用 gpio_cansleep()测试总是返回失败的 GPIO(见下文)，使用
-以下的函数访问::
+对于那些 GPIO，使用以下的函数访问::
 
 	/* GPIO 输入:返回零或非零 */
 	int gpio_get_value(unsigned gpio);
@@ -186,11 +185,6 @@ GPIO值是布尔值，零表示低电平，非零表示高电平。当读取一
 GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其反馈。期间需要
 休眠，这不能在 IRQ 例程(中断上下文)中执行。
 
-支持此类 GPIO 的平台通过以下函数返回非零值来区分出这种 GPIO。(此函数需要
-一个之前通过 gpio_request 分配到的有效 GPIO 编号)::
-
-	int gpio_cansleep(unsigned gpio);
-
 为了访问这种 GPIO,内核定义了一套不同的函数::
 
 	/* GPIO 输入:返回零或非零 ,可能会休眠 */
@@ -199,7 +193,6 @@ GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其
 	/* GPIO 输出,可能会休眠 */
 	void gpio_set_value_cansleep(unsigned gpio, int value);
 
-
 访问这样的 GPIO 需要一个允许休眠的上下文，例如线程 IRQ 处理例程，并用以上的
 访问函数替换那些没有 cansleep()后缀的自旋锁安全访问函数。
 
@@ -294,11 +287,6 @@ gpio_request()前将这类细节配置好，例如使用引脚控制子系统的
 
 	* GPIOF_INIT_LOW	- 在作为输出时,初始值为低电平
 	* GPIOF_INIT_HIGH	- 在作为输出时,初始值为高电平
-	* GPIOF_OPEN_DRAIN	- gpio引脚为开漏信号
-	* GPIOF_OPEN_SOURCE	- gpio引脚为源极开路信号
-
-	* GPIOF_EXPORT_DIR_FIXED	- 将 gpio 导出到 sysfs，并保持方向
-	* GPIOF_EXPORT_DIR_CHANGEABLE	- 同样是导出, 但允许改变方向
 
 因为 GPIOF_INIT_* 仅有在配置为输出的时候才存在,所以有效的组合为:
 
@@ -306,18 +294,6 @@ gpio_request()前将这类细节配置好，例如使用引脚控制子系统的
 	* GPIOF_OUT_INIT_LOW	- 配置为输出,并初始化为低电平
 	* GPIOF_OUT_INIT_HIGH	- 配置为输出,并初始化为高电平
 
-当设置 flag 为 GPIOF_OPEN_DRAIN 时，则假设引脚是开漏信号。这样的引脚
-将不会在输出模式下置1。这样的引脚需要连接上拉电阻。通过使能这个标志，gpio库
-将会在被要求输出模式下置1时将引脚变为输入状态来使引脚置高。引脚在输出模式下
-通过置0使其输出低电平。
-
-当设置 flag 为 GPIOF_OPEN_SOURCE 时，则假设引脚为源极开路信号。这样的引脚
-将不会在输出模式下置0。这样的引脚需要连接下拉电阻。通过使能这个标志，gpio库
-将会在被要求输出模式下置0时将引脚变为输入状态来使引脚置低。引脚在输出模式下
-通过置1使其输出高电平。
-
-将来这些标志可能扩展到支持更多的属性。
-
 更进一步,为了更简单地声明/释放多个 GPIO,'struct gpio'被引进来封装所有
 这三个领域::
 
@@ -500,8 +476,8 @@ GPIO 实现者的框架（可选）
 
 为了支持这个框架，一个平台的 Kconfig 文件将会 "select"(选择)
 ARCH_REQUIRE_GPIOLIB 或 ARCH_WANT_OPTIONAL_GPIOLIB，并让它的
-<asm/gpio.h> 包含 <asm-generic/gpio.h>，同时定义三个方法:
-gpio_get_value()、gpio_set_value()和 gpio_cansleep()。
+<asm/gpio.h> 包含 <asm-generic/gpio.h>，同时定义两个方法:
+gpio_get_value()、gpio_set_value()。
 
 它也应提供一个 ARCH_NR_GPIOS 的定义值，这样可以更好地反映该平台 GPIO
 的实际数量,节省静态表的空间。(这个定义值应该包含片上系统内建 GPIO 和
@@ -519,7 +495,6 @@ ARCH_WANT_OPTIONAL_GPIOLIB 意味着 gpiolib 核心默认关闭,且用户可以
 
   #define gpio_get_value	__gpio_get_value
   #define gpio_set_value	__gpio_set_value
-  #define gpio_cansleep		__gpio_cansleep
 
 这些定义可以用更理想的实现方法替代，那就是使用经过逻辑优化的内联函数来访问
 基于特定片上系统的 GPIO。例如,若引用的 GPIO (寄存器位偏移)是常量“12”，
diff --git a/Documentation/translations/zh_CN/mm/page_migration.rst b/Documentation/translations/zh_CN/mm/page_migration.rst
index 076081dc16354..f95063826a150 100644
--- a/Documentation/translations/zh_CN/mm/page_migration.rst
+++ b/Documentation/translations/zh_CN/mm/page_migration.rst
@@ -55,7 +55,7 @@ mbind()设置一个新的内存策略。一个进程的页面也可以通过sys_
    消失。它还可以防止交换器或其他扫描器遇到该页。
 
 
-2. 我们需要有一个new_page_t类型的函数，可以传递给migrate_pages()。这个函数应该计算
+2. 我们需要有一个new_folio_t类型的函数，可以传递给migrate_pages()。这个函数应该计算
    出如何在给定的旧页面中分配正确的新页面。
 
 3. migrate_pages()函数被调用，它试图进行迁移。它将调用该函数为每个被考虑迁移的页面分
diff --git a/Documentation/translations/zh_CN/process/2.Process.rst b/Documentation/translations/zh_CN/process/2.Process.rst
index 4a6ed02194943..e68c9de0f7f87 100644
--- a/Documentation/translations/zh_CN/process/2.Process.rst
+++ b/Documentation/translations/zh_CN/process/2.Process.rst
@@ -358,7 +358,7 @@ Andrew Morton 为有抱负的内核开发人员提供了如下建议
 	机器上始终完美运行”。通常的方法是和其他人一起解决问题（这可能需
 	要坚持！），但就是如此——这是内核开发的一部分。
 
-(http://lwn.net/articles/283982/)
+(http://lwn.net/Articles/283982/)
 
 在没有明显问题需要解决的情况下，通常建议开发人员查看当前的回归和开放缺陷
 列表。从来都不缺少需要解决的问题；通过解决这些问题，开发人员将从该过程获得
diff --git a/Documentation/translations/zh_CN/process/3.Early-stage.rst b/Documentation/translations/zh_CN/process/3.Early-stage.rst
index de53dd12e9118..2caba4753b753 100644
--- a/Documentation/translations/zh_CN/process/3.Early-stage.rst
+++ b/Documentation/translations/zh_CN/process/3.Early-stage.rst
@@ -44,7 +44,7 @@
 	试图向这些人传达用户需求是浪费时间。他们太“聪明”了，根本听不到少数
 	人的话。
 
-（http://lwn.net/articles/131776/）
+（http://lwn.net/Articles/131776/）
 
 实际情况却是不同的；与特定模块相比，内核开发人员更关心系统稳定性、长期维护
 以及找到问题的正确解决方案。这个故事的寓意是把重点放在问题上——而不是具体的
diff --git a/Documentation/translations/zh_CN/process/4.Coding.rst b/Documentation/translations/zh_CN/process/4.Coding.rst
index 94f7f866f1039..7cac9424f5d55 100644
--- a/Documentation/translations/zh_CN/process/4.Coding.rst
+++ b/Documentation/translations/zh_CN/process/4.Coding.rst
@@ -149,7 +149,7 @@ Linus对这个问题给出了最佳答案:
 	所以我们不会通过引入新问题来修复错误。这种方式是靠不住的，没人知道
 	是否真的有进展。是前进两步、后退一步，还是前进一步、后退两步？
 
-（http://lwn.net/articles/243460/）
+（http://lwn.net/Articles/243460/）
 
 特别不受欢迎的一种回归类型是用户空间ABI的任何变化。一旦接口被导出到用户空间，
 就必须无限期地支持它。这一事实使得用户空间接口的创建特别具有挑战性：因为它们
diff --git a/Documentation/translations/zh_CN/process/7.AdvancedTopics.rst b/Documentation/translations/zh_CN/process/7.AdvancedTopics.rst
index 6d0dadae13b12..57beca02181ce 100644
--- a/Documentation/translations/zh_CN/process/7.AdvancedTopics.rst
+++ b/Documentation/translations/zh_CN/process/7.AdvancedTopics.rst
@@ -98,7 +98,7 @@ Git提供了一些强大的工具，可以让您重写开发历史。一个不
    你可以给我发补丁，但当我从你那里拉取一个Git补丁时，我需要知道你清楚
    自己在做什么，我需要能够相信事情而 *无需* 手动检查每个单独的更改。
 
-（http://lwn.net/articles/224135/）。
+（http://lwn.net/Articles/224135/）。
 
 为了避免这种情况，请确保给定分支中的所有补丁都与相关主题紧密相关；“驱动程序
 修复”分支不应更改核心内存管理代码。而且，最重要的是，不要使用Git树来绕过
diff --git a/Documentation/translations/zh_TW/arch/arm64/amu.rst b/Documentation/translations/zh_TW/arch/arm64/amu.rst
new file mode 100644
index 0000000000000..f947a6c7369f7
--- /dev/null
+++ b/Documentation/translations/zh_TW/arch/arm64/amu.rst
@@ -0,0 +1,104 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../../disclaimer-zh_TW.rst
+
+:Original: :ref:`Documentation/arch/arm64/amu.rst <amu_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+            Hu Haowen <src.res@email.cn>
+
+==================================
+AArch64 Linux 中擴展的活動監控單元
+==================================
+
+作者: Ionela Voinescu <ionela.voinescu@arm.com>
+
+日期: 2019-09-10
+
+本文檔簡要描述了 AArch64 Linux 支持的活動監控單元的規範。
+
+
+架構總述
+--------
+
+活動監控是 ARMv8.4 CPU 架構引入的一個可選擴展特性。
+
+活動監控單元(在每個 CPU 中實現)爲系統管理提供了性能計數器。既可以通
+過系統寄存器的方式訪問計數器，同時也支持外部內存映射的方式訪問計數器。
+
+AMUv1 架構實現了一個由4個固定的64位事件計數器組成的計數器組。
+
+  - CPU 周期計數器：同 CPU 的頻率增長
+  - 常量計數器：同固定的系統時鐘頻率增長
+  - 淘汰指令計數器: 同每次架構指令執行增長
+  - 內存停頓周期計數器：計算由在時鐘域內的最後一級緩存中未命中而引起
+    的指令調度停頓周期數
+
+當處於 WFI 或者 WFE 狀態時，計數器不會增長。
+
+AMU 架構提供了一個高達16位的事件計數器空間，未來新的 AMU 版本中可能
+用它來實現新增的事件計數器。
+
+另外，AMUv1 實現了一個多達16個64位輔助事件計數器的計數器組。
+
+冷復位時所有的計數器會清零。
+
+
+基本支持
+--------
+
+內核可以安全地運行在支持 AMU 和不支持 AMU 的 CPU 組合中。
+因此，當配置 CONFIG_ARM64_AMU_EXTN 後我們無條件使能後續
+(secondary or hotplugged) CPU 檢測和使用這個特性。
+
+當在 CPU 上檢測到該特性時，我們會標記爲特性可用但是不能保證計數器的功能，
+僅表明有擴展屬性。
+
+固件(代碼運行在高異常級別，例如 arm-tf )需支持以下功能：
+
+ - 提供低異常級別(EL2 和 EL1)訪問 AMU 寄存器的能力。
+ - 使能計數器。如果未使能，它的值應爲 0。
+ - 在從電源關閉狀態啓動 CPU 前或後保存或者恢復計數器。
+
+當使用使能了該特性的內核啓動但固件損壞時，訪問計數器寄存器可能會遭遇
+panic 或者死鎖。即使未發現這些症狀，計數器寄存器返回的數據結果並不一
+定能反映真實情況。通常，計數器會返回 0，表明他們未被使能。
+
+如果固件沒有提供適當的支持最好關閉 CONFIG_ARM64_AMU_EXTN。
+值得注意的是，出於安全原因，不要繞過 AMUSERRENR_EL0 設置而捕獲從
+EL0(用戶空間) 訪問 EL1(內核空間)。 因此，固件應該確保訪問 AMU寄存器
+不會困在 EL2或EL3。
+
+AMUv1 的固定計數器可以通過如下系統寄存器訪問：
+
+ - SYS_AMEVCNTR0_CORE_EL0
+ - SYS_AMEVCNTR0_CONST_EL0
+ - SYS_AMEVCNTR0_INST_RET_EL0
+ - SYS_AMEVCNTR0_MEM_STALL_EL0
+
+特定輔助計數器可以通過 SYS_AMEVCNTR1_EL0(n) 訪問，其中n介於0到15。
+
+詳細信息定義在目錄：arch/arm64/include/asm/sysreg.h。
+
+
+用戶空間訪問
+------------
+
+由於以下原因，當前禁止從用戶空間訪問 AMU 的寄存器：
+
+  - 安全因數：可能會暴露處於安全模式執行的代碼信息。
+  - 意願：AMU 是用於系統管理的。
+
+同樣，該功能對用戶空間不可見。
+
+
+虛擬化
+------
+
+由於以下原因，當前禁止從 KVM 客戶端的用戶空間(EL0)和內核空間(EL1)
+訪問 AMU 的寄存器：
+
+  - 安全因數：可能會暴露給其他客戶端或主機端執行的代碼信息。
+
+任何試圖訪問 AMU 寄存器的行爲都會觸發一個註冊在客戶端的未定義異常。
+
diff --git a/Documentation/translations/zh_TW/arch/arm64/booting.txt b/Documentation/translations/zh_TW/arch/arm64/booting.txt
new file mode 100644
index 0000000000000..24817b8b70cd0
--- /dev/null
+++ b/Documentation/translations/zh_TW/arch/arm64/booting.txt
@@ -0,0 +1,251 @@
+SPDX-License-Identifier: GPL-2.0
+
+Chinese translated version of Documentation/arch/arm64/booting.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+M:	Will Deacon <will.deacon@arm.com>
+zh_CN:	Fu Wei <wefu@redhat.com>
+zh_TW:	Hu Haowen <src.res@email.cn>
+C:	55f058e7574c3615dea4615573a19bdb258696c6
+---------------------------------------------------------------------
+Documentation/arch/arm64/booting.rst 的中文翻譯
+
+如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
+交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
+譯存在問題，請聯繫中文版維護者。
+
+英文版維護者： Will Deacon <will.deacon@arm.com>
+中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
+繁體中文版校譯者： 胡皓文  Hu Haowen <src.res@email.cn>
+本文翻譯提交時的 Git 檢出點爲： 55f058e7574c3615dea4615573a19bdb258696c6
+
+以下爲正文
+---------------------------------------------------------------------
+			啓動 AArch64 Linux
+			==================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2012 年 09 月 07 日
+
+本文檔基於 Russell King 的 ARM 啓動文檔，且適用於所有公開發布的
+AArch64 Linux 內核代碼。
+
+AArch64 異常模型由多個異常級（EL0 - EL3）組成，對於 EL0 和 EL1 異常級
+有對應的安全和非安全模式。EL2 是系統管理級，且僅存在於非安全模式下。
+EL3 是最高特權級，且僅存在於安全模式下。
+
+基於本文檔的目的，我們將簡單地使用『引導裝載程序』（『boot loader』）
+這個術語來定義在將控制權交給 Linux 內核前 CPU 上執行的所有軟體。
+這可能包含安全監控和系統管理代碼，或者它可能只是一些用於準備最小啓動
+環境的指令。
+
+基本上，引導裝載程序（至少）應實現以下操作：
+
+1、設置和初始化 RAM
+2、設置設備樹數據
+3、解壓內核映像
+4、調用內核映像
+
+
+1、設置和初始化 RAM
+-----------------
+
+必要性: 強制
+
+引導裝載程序應該找到並初始化系統中所有內核用於保持系統變量數據的 RAM。
+這個操作的執行方式因設備而異。（它可能使用內部算法來自動定位和計算所有
+RAM，或可能使用對這個設備已知的 RAM 信息，還可能是引導裝載程序設計者
+想到的任何合適的方法。）
+
+
+2、設置設備樹數據
+---------------
+
+必要性: 強制
+
+設備樹數據塊（dtb）必須 8 字節對齊，且大小不能超過 2MB。由於設備樹
+數據塊將在使能緩存的情況下以 2MB 粒度被映射，故其不能被置於必須以特定
+屬性映射的2M區域內。
+
+註： v4.2 之前的版本同時要求設備樹數據塊被置於從內核映像以下
+text_offset 字節處算起第一個 512MB 內。
+
+3、解壓內核映像
+-------------
+
+必要性: 可選
+
+AArch64 內核當前沒有提供自解壓代碼，因此如果使用了壓縮內核映像文件
+（比如 Image.gz），則需要通過引導裝載程序（使用 gzip 等）來進行解壓。
+若引導裝載程序沒有實現這個功能，就要使用非壓縮內核映像文件。
+
+
+4、調用內核映像
+-------------
+
+必要性: 強制
+
+已解壓的內核映像包含一個 64 字節的頭，內容如下：
+
+  u32 code0;			/* 可執行代碼 */
+  u32 code1;			/* 可執行代碼 */
+  u64 text_offset;		/* 映像裝載偏移，小端模式 */
+  u64 image_size;		/* 映像實際大小, 小端模式 */
+  u64 flags;			/* 內核旗標, 小端模式 *
+  u64 res2	= 0;		/* 保留 */
+  u64 res3	= 0;		/* 保留 */
+  u64 res4	= 0;		/* 保留 */
+  u32 magic	= 0x644d5241;	/* 魔數, 小端, "ARM\x64" */
+  u32 res5;			/* 保留 （用於 PE COFF 偏移） */
+
+
+映像頭注釋：
+
+- 自 v3.17 起，除非另有說明，所有域都是小端模式。
+
+- code0/code1 負責跳轉到 stext.
+
+- 當通過 EFI 啓動時， 最初 code0/code1 被跳過。
+  res5 是到 PE 文件頭的偏移，而 PE 文件頭含有 EFI 的啓動入口點
+  （efi_stub_entry）。當 stub 代碼完成了它的使命，它會跳轉到 code0
+  繼續正常的啓動流程。
+
+- v3.17 之前，未明確指定 text_offset 的字節序。此時，image_size 爲零，
+  且 text_offset 依照內核字節序爲 0x80000。
+  當 image_size 非零，text_offset 爲小端模式且是有效值，應被引導加載
+  程序使用。當 image_size 爲零，text_offset 可假定爲 0x80000。
+
+- flags 域 (v3.17 引入) 爲 64 位小端模式，其編碼如下：
+  位 0: 	內核字節序。 1 表示大端模式，0 表示小端模式。
+  位 1-2:	內核頁大小。
+			0 - 未指定。
+			1 - 4K
+			2 - 16K
+			3 - 64K
+  位 3:		內核物理位置
+			0 - 2MB 對齊基址應儘量靠近內存起始處，因爲
+			    其基址以下的內存無法通過線性映射訪問
+			1 - 2MB 對齊基址可以在物理內存的任意位置
+  位 4-63:	保留。
+
+- 當 image_size 爲零時，引導裝載程序應試圖在內核映像末尾之後儘可能
+  多地保留空閒內存供內核直接使用。對內存空間的需求量因所選定的內核
+  特性而異, 並無實際限制。
+
+內核映像必須被放置在任意一個可用系統內存 2MB 對齊基址的 text_offset
+字節處，並從該處被調用。2MB 對齊基址和內核映像起始地址之間的區域對於
+內核來說沒有特殊意義，且可能被用於其他目的。
+從映像起始地址算起，最少必須準備 image_size 字節的空閒內存供內核使用。
+註： v4.6 之前的版本無法使用內核映像物理偏移以下的內存，所以當時建議
+將映像儘量放置在靠近系統內存起始的地方。
+
+任何提供給內核的內存（甚至在映像起始地址之前），若未從內核中標記爲保留
+(如在設備樹（dtb）的 memreserve 區域），都將被認爲對內核是可用。
+
+在跳轉入內核前，必須符合以下狀態：
+
+- 停止所有 DMA 設備，這樣內存數據就不會因爲虛假網絡包或磁碟數據而
+  被破壞。這可能可以節省你許多的調試時間。
+
+- 主 CPU 通用寄存器設置
+  x0 = 系統 RAM 中設備樹數據塊（dtb）的物理地址。
+  x1 = 0 (保留，將來可能使用)
+  x2 = 0 (保留，將來可能使用)
+  x3 = 0 (保留，將來可能使用)
+
+- CPU 模式
+  所有形式的中斷必須在 PSTATE.DAIF 中被屏蔽（Debug、SError、IRQ
+  和 FIQ）。
+  CPU 必須處於 EL2（推薦，可訪問虛擬化擴展）或非安全 EL1 模式下。
+
+- 高速緩存、MMU
+  MMU 必須關閉。
+  指令緩存開啓或關閉皆可。
+  已載入的內核映像的相應內存區必須被清理，以達到緩存一致性點（PoC）。
+  當存在系統緩存或其他使能緩存的一致性主控器時，通常需使用虛擬地址
+  維護其緩存，而非 set/way 操作。
+  遵從通過虛擬地址操作維護構架緩存的系統緩存必須被配置，並可以被使能。
+  而不通過虛擬地址操作維護構架緩存的系統緩存（不推薦），必須被配置且
+  禁用。
+
+  *譯者註：對於 PoC 以及緩存相關內容，請參考 ARMv8 構架參考手冊
+   ARM DDI 0487A
+
+- 架構計時器
+  CNTFRQ 必須設定爲計時器的頻率，且 CNTVOFF 必須設定爲對所有 CPU
+  都一致的值。如果在 EL1 模式下進入內核，則 CNTHCTL_EL2 中的
+  EL1PCTEN (bit 0) 必須置位。
+
+- 一致性
+  通過內核啓動的所有 CPU 在內核入口地址上必須處於相同的一致性域中。
+  這可能要根據具體實現來定義初始化過程，以使能每個CPU上對維護操作的
+  接收。
+
+- 系統寄存器
+  在進入內核映像的異常級中，所有構架中可寫的系統寄存器必須通過軟體
+  在一個更高的異常級別下初始化，以防止在 未知 狀態下運行。
+
+  對於擁有 GICv3 中斷控制器並以 v3 模式運行的系統：
+  - 如果 EL3 存在：
+    ICC_SRE_EL3.Enable (位 3) 必須初始化爲 0b1。
+    ICC_SRE_EL3.SRE (位 0) 必須初始化爲 0b1。
+  - 若內核運行在 EL1：
+    ICC_SRE_EL2.Enable (位 3) 必須初始化爲 0b1。
+    ICC_SRE_EL2.SRE (位 0) 必須初始化爲 0b1。
+  - 設備樹（DT）或 ACPI 表必須描述一個 GICv3 中斷控制器。
+
+  對於擁有 GICv3 中斷控制器並以兼容（v2）模式運行的系統：
+  - 如果 EL3 存在：
+    ICC_SRE_EL3.SRE (位 0) 必須初始化爲 0b0。
+  - 若內核運行在 EL1：
+    ICC_SRE_EL2.SRE (位 0) 必須初始化爲 0b0。
+  - 設備樹（DT）或 ACPI 表必須描述一個 GICv2 中斷控制器。
+
+以上對於 CPU 模式、高速緩存、MMU、架構計時器、一致性、系統寄存器的
+必要條件描述適用於所有 CPU。所有 CPU 必須在同一異常級別跳入內核。
+
+引導裝載程序必須在每個 CPU 處於以下狀態時跳入內核入口：
+
+- 主 CPU 必須直接跳入內核映像的第一條指令。通過此 CPU 傳遞的設備樹
+  數據塊必須在每個 CPU 節點中包含一個 『enable-method』 屬性，所
+  支持的 enable-method 請見下文。
+
+  引導裝載程序必須生成這些設備樹屬性，並在跳入內核入口之前將其插入
+  數據塊。
+
+- enable-method 爲 「spin-table」 的 CPU 必須在它們的 CPU
+  節點中包含一個 『cpu-release-addr』 屬性。這個屬性標識了一個
+  64 位自然對齊且初始化爲零的內存位置。
+
+  這些 CPU 必須在內存保留區（通過設備樹中的 /memreserve/ 域傳遞
+  給內核）中自旋於內核之外，輪詢它們的 cpu-release-addr 位置（必須
+  包含在保留區中）。可通過插入 wfe 指令來降低忙循環開銷，而主 CPU 將
+  發出 sev 指令。當對 cpu-release-addr 所指位置的讀取操作返回非零值
+  時，CPU 必須跳入此值所指向的地址。此值爲一個單獨的 64 位小端值，
+  因此 CPU 須在跳轉前將所讀取的值轉換爲其本身的端模式。
+
+- enable-method 爲 「psci」 的 CPU 保持在內核外（比如，在
+  memory 節點中描述爲內核空間的內存區外，或在通過設備樹 /memreserve/
+  域中描述爲內核保留區的空間中）。內核將會發起在 ARM 文檔（編號
+  ARM DEN 0022A：用於 ARM 上的電源狀態協調接口系統軟體）中描述的
+  CPU_ON 調用來將 CPU 帶入內核。
+
+  *譯者注: ARM DEN 0022A 已更新到 ARM DEN 0022C。
+
+  設備樹必須包含一個 『psci』 節點，請參考以下文檔：
+  Documentation/devicetree/bindings/arm/psci.yaml
+
+
+- 輔助 CPU 通用寄存器設置
+  x0 = 0 (保留，將來可能使用)
+  x1 = 0 (保留，將來可能使用)
+  x2 = 0 (保留，將來可能使用)
+  x3 = 0 (保留，將來可能使用)
+
diff --git a/Documentation/translations/zh_TW/arch/arm64/elf_hwcaps.rst b/Documentation/translations/zh_TW/arch/arm64/elf_hwcaps.rst
new file mode 100644
index 0000000000000..fca3c6ff7b939
--- /dev/null
+++ b/Documentation/translations/zh_TW/arch/arm64/elf_hwcaps.rst
@@ -0,0 +1,244 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../../disclaimer-zh_TW.rst
+
+:Original: :ref:`Documentation/arch/arm64/elf_hwcaps.rst <elf_hwcaps_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+            Hu Haowen <src.res@email.cn>
+
+================
+ARM64 ELF hwcaps
+================
+
+這篇文檔描述了 arm64 ELF hwcaps 的用法和語義。
+
+
+1. 簡介
+-------
+
+有些硬體或軟體功能僅在某些 CPU 實現上和/或在具體某個內核配置上可用，但
+對於處於 EL0 的用戶空間代碼沒有可用的架構發現機制。內核通過在輔助向量表
+公開一組稱爲 hwcaps 的標誌而把這些功能暴露給用戶空間。
+
+用戶空間軟體可以通過獲取輔助向量的 AT_HWCAP 或 AT_HWCAP2 條目來測試功能，
+並測試是否設置了相關標誌，例如::
+
+	bool floating_point_is_present(void)
+	{
+		unsigned long hwcaps = getauxval(AT_HWCAP);
+		if (hwcaps & HWCAP_FP)
+			return true;
+
+		return false;
+	}
+
+如果軟體依賴於 hwcap 描述的功能，在嘗試使用該功能前則應檢查相關的 hwcap
+標誌以驗證該功能是否存在。
+
+不能通過其他方式探查這些功能。當一個功能不可用時，嘗試使用它可能導致不可
+預測的行爲，並且無法保證能確切的知道該功能不可用，例如 SIGILL。
+
+
+2. Hwcaps 的說明
+----------------
+
+大多數 hwcaps 旨在說明通過架構 ID 寄存器(處於 EL0 的用戶空間代碼無法訪問)
+描述的功能的存在。這些 hwcap 通過 ID 寄存器欄位定義，並且應根據 ARM 體系
+結構參考手冊（ARM ARM）中定義的欄位來解釋說明。
+
+這些 hwcaps 以下面的形式描述::
+
+    idreg.field == val 表示有某個功能。
+
+當 idreg.field 中有 val 時，hwcaps 表示 ARM ARM 定義的功能是有效的，但是
+並不是說要完全和 val 相等，也不是說 idreg.field 描述的其他功能就是缺失的。
+
+其他 hwcaps 可能表明無法僅由 ID 寄存器描述的功能的存在。這些 hwcaps 可能
+沒有被 ID 寄存器描述，需要參考其他文檔。
+
+
+3. AT_HWCAP 中揭示的 hwcaps
+---------------------------
+
+HWCAP_FP
+    ID_AA64PFR0_EL1.FP == 0b0000 表示有此功能。
+
+HWCAP_ASIMD
+    ID_AA64PFR0_EL1.AdvSIMD == 0b0000 表示有此功能。
+
+HWCAP_EVTSTRM
+    通用計時器頻率配置爲大約100KHz以生成事件。
+
+HWCAP_AES
+    ID_AA64ISAR0_EL1.AES == 0b0001 表示有此功能。
+
+HWCAP_PMULL
+    ID_AA64ISAR0_EL1.AES == 0b0010 表示有此功能。
+
+HWCAP_SHA1
+    ID_AA64ISAR0_EL1.SHA1 == 0b0001 表示有此功能。
+
+HWCAP_SHA2
+    ID_AA64ISAR0_EL1.SHA2 == 0b0001 表示有此功能。
+
+HWCAP_CRC32
+    ID_AA64ISAR0_EL1.CRC32 == 0b0001 表示有此功能。
+
+HWCAP_ATOMICS
+    ID_AA64ISAR0_EL1.Atomic == 0b0010 表示有此功能。
+
+HWCAP_FPHP
+    ID_AA64PFR0_EL1.FP == 0b0001 表示有此功能。
+
+HWCAP_ASIMDHP
+    ID_AA64PFR0_EL1.AdvSIMD == 0b0001 表示有此功能。
+
+HWCAP_CPUID
+    根據 Documentation/arch/arm64/cpu-feature-registers.rst 描述，EL0 可以訪問
+    某些 ID 寄存器。
+
+    這些 ID 寄存器可能表示功能的可用性。
+
+HWCAP_ASIMDRDM
+    ID_AA64ISAR0_EL1.RDM == 0b0001 表示有此功能。
+
+HWCAP_JSCVT
+    ID_AA64ISAR1_EL1.JSCVT == 0b0001 表示有此功能。
+
+HWCAP_FCMA
+    ID_AA64ISAR1_EL1.FCMA == 0b0001 表示有此功能。
+
+HWCAP_LRCPC
+    ID_AA64ISAR1_EL1.LRCPC == 0b0001 表示有此功能。
+
+HWCAP_DCPOP
+    ID_AA64ISAR1_EL1.DPB == 0b0001 表示有此功能。
+
+HWCAP_SHA3
+    ID_AA64ISAR0_EL1.SHA3 == 0b0001 表示有此功能。
+
+HWCAP_SM3
+    ID_AA64ISAR0_EL1.SM3 == 0b0001 表示有此功能。
+
+HWCAP_SM4
+    ID_AA64ISAR0_EL1.SM4 == 0b0001 表示有此功能。
+
+HWCAP_ASIMDDP
+    ID_AA64ISAR0_EL1.DP == 0b0001 表示有此功能。
+
+HWCAP_SHA512
+    ID_AA64ISAR0_EL1.SHA2 == 0b0010 表示有此功能。
+
+HWCAP_SVE
+    ID_AA64PFR0_EL1.SVE == 0b0001 表示有此功能。
+
+HWCAP_ASIMDFHM
+    ID_AA64ISAR0_EL1.FHM == 0b0001 表示有此功能。
+
+HWCAP_DIT
+    ID_AA64PFR0_EL1.DIT == 0b0001 表示有此功能。
+
+HWCAP_USCAT
+    ID_AA64MMFR2_EL1.AT == 0b0001 表示有此功能。
+
+HWCAP_ILRCPC
+    ID_AA64ISAR1_EL1.LRCPC == 0b0010 表示有此功能。
+
+HWCAP_FLAGM
+    ID_AA64ISAR0_EL1.TS == 0b0001 表示有此功能。
+
+HWCAP_SSBS
+    ID_AA64PFR1_EL1.SSBS == 0b0010 表示有此功能。
+
+HWCAP_SB
+    ID_AA64ISAR1_EL1.SB == 0b0001 表示有此功能。
+
+HWCAP_PACA
+    如 Documentation/arch/arm64/pointer-authentication.rst 所描述，
+    ID_AA64ISAR1_EL1.APA == 0b0001 或 ID_AA64ISAR1_EL1.API == 0b0001
+    表示有此功能。
+
+HWCAP_PACG
+    如 Documentation/arch/arm64/pointer-authentication.rst 所描述，
+    ID_AA64ISAR1_EL1.GPA == 0b0001 或 ID_AA64ISAR1_EL1.GPI == 0b0001
+    表示有此功能。
+
+HWCAP2_DCPODP
+
+    ID_AA64ISAR1_EL1.DPB == 0b0010 表示有此功能。
+
+HWCAP2_SVE2
+
+    ID_AA64ZFR0_EL1.SVEVer == 0b0001 表示有此功能。
+
+HWCAP2_SVEAES
+
+    ID_AA64ZFR0_EL1.AES == 0b0001 表示有此功能。
+
+HWCAP2_SVEPMULL
+
+    ID_AA64ZFR0_EL1.AES == 0b0010 表示有此功能。
+
+HWCAP2_SVEBITPERM
+
+    ID_AA64ZFR0_EL1.BitPerm == 0b0001 表示有此功能。
+
+HWCAP2_SVESHA3
+
+    ID_AA64ZFR0_EL1.SHA3 == 0b0001 表示有此功能。
+
+HWCAP2_SVESM4
+
+    ID_AA64ZFR0_EL1.SM4 == 0b0001 表示有此功能。
+
+HWCAP2_FLAGM2
+
+    ID_AA64ISAR0_EL1.TS == 0b0010 表示有此功能。
+
+HWCAP2_FRINT
+
+    ID_AA64ISAR1_EL1.FRINTTS == 0b0001 表示有此功能。
+
+HWCAP2_SVEI8MM
+
+    ID_AA64ZFR0_EL1.I8MM == 0b0001 表示有此功能。
+
+HWCAP2_SVEF32MM
+
+    ID_AA64ZFR0_EL1.F32MM == 0b0001 表示有此功能。
+
+HWCAP2_SVEF64MM
+
+    ID_AA64ZFR0_EL1.F64MM == 0b0001 表示有此功能。
+
+HWCAP2_SVEBF16
+
+    ID_AA64ZFR0_EL1.BF16 == 0b0001 表示有此功能。
+
+HWCAP2_I8MM
+
+    ID_AA64ISAR1_EL1.I8MM == 0b0001 表示有此功能。
+
+HWCAP2_BF16
+
+    ID_AA64ISAR1_EL1.BF16 == 0b0001 表示有此功能。
+
+HWCAP2_DGH
+
+    ID_AA64ISAR1_EL1.DGH == 0b0001 表示有此功能。
+
+HWCAP2_RNG
+
+    ID_AA64ISAR0_EL1.RNDR == 0b0001 表示有此功能。
+
+HWCAP2_BTI
+
+    ID_AA64PFR0_EL1.BT == 0b0001 表示有此功能。
+
+
+4. 未使用的 AT_HWCAP 位
+-----------------------
+
+爲了與用戶空間交互，內核保證 AT_HWCAP 的第62、63位將始終返回0。
+
diff --git a/Documentation/translations/zh_TW/arch/arm64/hugetlbpage.rst b/Documentation/translations/zh_TW/arch/arm64/hugetlbpage.rst
new file mode 100644
index 0000000000000..10feb329dfb84
--- /dev/null
+++ b/Documentation/translations/zh_TW/arch/arm64/hugetlbpage.rst
@@ -0,0 +1,49 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../../disclaimer-zh_TW.rst
+
+:Original: :ref:`Documentation/arch/arm64/hugetlbpage.rst <hugetlbpage_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+            Hu Haowen <src.res@email.cn>
+
+=====================
+ARM64中的 HugeTLBpage
+=====================
+
+大頁依靠有效利用 TLBs 來提高地址翻譯的性能。這取決於以下
+兩點 -
+
+  - 大頁的大小
+  - TLBs 支持的條目大小
+
+ARM64 接口支持2種大頁方式。
+
+1) pud/pmd 級別的塊映射
+-----------------------
+
+這是常規大頁，他們的 pmd 或 pud 頁面表條目指向一個內存塊。
+不管 TLB 中支持的條目大小如何，塊映射可以減少翻譯大頁地址
+所需遍歷的頁表深度。
+
+2) 使用連續位
+-------------
+
+架構中轉換頁表條目(D4.5.3, ARM DDI 0487C.a)中提供一個連續
+位告訴 MMU 這個條目是一個連續條目集的一員，它可以被緩存在單
+個 TLB 條目中。
+
+在 Linux 中連續位用來增加 pmd 和 pte(最後一級)級別映射的大
+小。受支持的連續頁表條目數量因頁面大小和頁表級別而異。
+
+
+支持以下大頁尺寸配置 -
+
+  ====== ========   ====    ========    ===
+  -      CONT PTE    PMD    CONT PMD    PUD
+  ====== ========   ====    ========    ===
+  4K:         64K     2M         32M     1G
+  16K:         2M    32M          1G
+  64K:         2M   512M         16G
+  ====== ========   ====    ========    ===
+
diff --git a/Documentation/translations/zh_TW/arch/arm64/index.rst b/Documentation/translations/zh_TW/arch/arm64/index.rst
new file mode 100644
index 0000000000000..68befee14b99a
--- /dev/null
+++ b/Documentation/translations/zh_TW/arch/arm64/index.rst
@@ -0,0 +1,23 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../../disclaimer-zh_TW.rst
+
+:Original: :ref:`Documentation/arch/arm64/index.rst <arm64_index>`
+:Translator: Bailu Lin <bailu.lin@vivo.com>
+             Hu Haowen <src.res@email.cn>
+
+.. _tw_arm64_index:
+
+
+==========
+ARM64 架構
+==========
+
+.. toctree::
+    :maxdepth: 2
+
+    amu
+    hugetlbpage
+    perf
+    elf_hwcaps
+
diff --git a/Documentation/translations/zh_TW/arch/arm64/legacy_instructions.txt b/Documentation/translations/zh_TW/arch/arm64/legacy_instructions.txt
new file mode 100644
index 0000000000000..3c915df9836c3
--- /dev/null
+++ b/Documentation/translations/zh_TW/arch/arm64/legacy_instructions.txt
@@ -0,0 +1,77 @@
+SPDX-License-Identifier: GPL-2.0
+
+Chinese translated version of Documentation/arch/arm64/legacy_instructions.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Punit Agrawal <punit.agrawal@arm.com>
+            Suzuki K. Poulose <suzuki.poulose@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+Traditional Chinese maintainer: Hu Haowen <src.res@email.cn>
+---------------------------------------------------------------------
+Documentation/arch/arm64/legacy_instructions.rst 的中文翻譯
+
+如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
+交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
+譯存在問題，請聯繫中文版維護者。
+
+本文翻譯提交時的 Git 檢出點爲： bc465aa9d045feb0e13b4a8f32cc33c1943f62d6
+
+英文版維護者： Punit Agrawal <punit.agrawal@arm.com>
+            Suzuki K. Poulose <suzuki.poulose@arm.com>
+中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
+繁體中文版校譯者：胡皓文  Hu Haowen <src.res@email.cn>
+
+以下爲正文
+---------------------------------------------------------------------
+Linux 內核在 arm64 上的移植提供了一個基礎框架，以支持構架中正在被淘汰或已廢棄指令的模擬執行。
+這個基礎框架的代碼使用未定義指令鉤子（hooks）來支持模擬。如果指令存在，它也允許在硬體中啓用該指令。
+
+模擬模式可通過寫 sysctl 節點（/proc/sys/abi）來控制。
+不同的執行方式及 sysctl 節點的相應值，解釋如下：
+
+* Undef（未定義）
+  值： 0
+  產生未定義指令終止異常。它是那些構架中已廢棄的指令，如 SWP，的默認處理方式。
+
+* Emulate（模擬）
+  值： 1
+  使用軟體模擬方式。爲解決軟體遷移問題，這種模擬指令模式的使用是被跟蹤的，並會發出速率限制警告。
+  它是那些構架中正在被淘汰的指令，如 CP15 barriers（隔離指令），的默認處理方式。
+
+* Hardware Execution（硬體執行）
+  值： 2
+  雖然標記爲正在被淘汰，但一些實現可能提供硬體執行這些指令的使能/禁用操作。
+  使用硬體執行一般會有更好的性能，但將無法收集運行時對正被淘汰指令的使用統計數據。
+
+默認執行模式依賴於指令在構架中狀態。正在被淘汰的指令應該以模擬（Emulate）作爲默認模式，
+而已廢棄的指令必須默認使用未定義（Undef）模式
+
+注意：指令模擬可能無法應對所有情況。更多詳情請參考單獨的指令注釋。
+
+受支持的遺留指令
+-------------
+* SWP{B}
+節點: /proc/sys/abi/swp
+狀態: 已廢棄
+默認執行方式: Undef (0)
+
+* CP15 Barriers
+節點: /proc/sys/abi/cp15_barrier
+狀態: 正被淘汰，不推薦使用
+默認執行方式: Emulate (1)
+
+* SETEND
+節點: /proc/sys/abi/setend
+狀態: 正被淘汰，不推薦使用
+默認執行方式: Emulate (1)*
+註：爲了使能這個特性，系統中的所有 CPU 必須在 EL0 支持混合字節序。
+如果一個新的 CPU （不支持混合字節序） 在使能這個特性後被熱插入系統，
+在應用中可能會出現不可預期的結果。
+
diff --git a/Documentation/translations/zh_TW/arch/arm64/memory.txt b/Documentation/translations/zh_TW/arch/arm64/memory.txt
new file mode 100644
index 0000000000000..2437380a26d8a
--- /dev/null
+++ b/Documentation/translations/zh_TW/arch/arm64/memory.txt
@@ -0,0 +1,119 @@
+SPDX-License-Identifier: GPL-2.0
+
+Chinese translated version of Documentation/arch/arm64/memory.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Catalin Marinas <catalin.marinas@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+Traditional Chinese maintainer: Hu Haowen <src.res@email.cn>
+---------------------------------------------------------------------
+Documentation/arch/arm64/memory.rst 的中文翻譯
+
+如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
+交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
+譯存在問題，請聯繫中文版維護者。
+
+本文翻譯提交時的 Git 檢出點爲： bc465aa9d045feb0e13b4a8f32cc33c1943f62d6
+
+英文版維護者： Catalin Marinas <catalin.marinas@arm.com>
+中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
+繁體中文版校譯者： 胡皓文  Hu Haowen <src.res@email.cn>
+
+以下爲正文
+---------------------------------------------------------------------
+		     Linux 在 AArch64 中的內存布局
+		     ===========================
+
+作者: Catalin Marinas <catalin.marinas@arm.com>
+
+本文檔描述 AArch64 Linux 內核所使用的虛擬內存布局。此構架可以實現
+頁大小爲 4KB 的 4 級轉換表和頁大小爲 64KB 的 3 級轉換表。
+
+AArch64 Linux 使用 3 級或 4 級轉換表，其頁大小配置爲 4KB，對於用戶和內核
+分別都有 39-bit (512GB) 或 48-bit (256TB) 的虛擬地址空間。
+對於頁大小爲 64KB的配置，僅使用 2 級轉換表，有 42-bit (4TB) 的虛擬地址空間，但內存布局相同。
+
+用戶地址空間的 63:48 位爲 0，而內核地址空間的相應位爲 1。TTBRx 的
+選擇由虛擬地址的 63 位給出。swapper_pg_dir 僅包含內核（全局）映射，
+而用戶 pgd 僅包含用戶（非全局）映射。swapper_pg_dir 地址被寫入
+TTBR1 中，且從不寫入 TTBR0。
+
+
+AArch64 Linux 在頁大小爲 4KB，並使用 3 級轉換表時的內存布局：
+
+起始地址			結束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	0000007fffffffff	 512GB		用戶空間
+ffffff8000000000	ffffffffffffffff	 512GB		內核空間
+
+
+AArch64 Linux 在頁大小爲 4KB，並使用 4 級轉換表時的內存布局：
+
+起始地址			結束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	0000ffffffffffff	 256TB		用戶空間
+ffff000000000000	ffffffffffffffff	 256TB		內核空間
+
+
+AArch64 Linux 在頁大小爲 64KB，並使用 2 級轉換表時的內存布局：
+
+起始地址			結束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	000003ffffffffff	   4TB		用戶空間
+fffffc0000000000	ffffffffffffffff	   4TB		內核空間
+
+
+AArch64 Linux 在頁大小爲 64KB，並使用 3 級轉換表時的內存布局：
+
+起始地址			結束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	0000ffffffffffff	 256TB		用戶空間
+ffff000000000000	ffffffffffffffff	 256TB		內核空間
+
+
+更詳細的內核虛擬內存布局，請參閱內核啓動信息。
+
+
+4KB 頁大小的轉換表查找：
+
++--------+--------+--------+--------+--------+--------+--------+--------+
+|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
++--------+--------+--------+--------+--------+--------+--------+--------+
+ |                 |         |         |         |         |
+ |                 |         |         |         |         v
+ |                 |         |         |         |   [11:0]  頁內偏移
+ |                 |         |         |         +-> [20:12] L3 索引
+ |                 |         |         +-----------> [29:21] L2 索引
+ |                 |         +---------------------> [38:30] L1 索引
+ |                 +-------------------------------> [47:39] L0 索引
+ +-------------------------------------------------> [63] TTBR0/1
+
+
+64KB 頁大小的轉換表查找：
+
++--------+--------+--------+--------+--------+--------+--------+--------+
+|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
++--------+--------+--------+--------+--------+--------+--------+--------+
+ |                 |    |               |              |
+ |                 |    |               |              v
+ |                 |    |               |            [15:0]  頁內偏移
+ |                 |    |               +----------> [28:16] L3 索引
+ |                 |    +--------------------------> [41:29] L2 索引
+ |                 +-------------------------------> [47:42] L1 索引
+ +-------------------------------------------------> [63] TTBR0/1
+
+
+當使用 KVM 時, 管理程序（hypervisor）在 EL2 中通過相對內核虛擬地址的
+一個固定偏移來映射內核頁（內核虛擬地址的高 24 位設爲零）:
+
+起始地址			結束地址			大小		用途
+-----------------------------------------------------------------------
+0000004000000000	0000007fffffffff	 256GB		在 HYP 中映射的內核對象
+
diff --git a/Documentation/translations/zh_TW/arch/arm64/perf.rst b/Documentation/translations/zh_TW/arch/arm64/perf.rst
new file mode 100644
index 0000000000000..3b39997a52ebb
--- /dev/null
+++ b/Documentation/translations/zh_TW/arch/arm64/perf.rst
@@ -0,0 +1,88 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../../disclaimer-zh_TW.rst
+
+:Original: :ref:`Documentation/arch/arm64/perf.rst <perf_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+            Hu Haowen <src.res@email.cn>
+
+=============
+Perf 事件屬性
+=============
+
+:作者: Andrew Murray <andrew.murray@arm.com>
+:日期: 2019-03-06
+
+exclude_user
+------------
+
+該屬性排除用戶空間。
+
+用戶空間始終運行在 EL0，因此該屬性將排除 EL0。
+
+
+exclude_kernel
+--------------
+
+該屬性排除內核空間。
+
+打開 VHE 時內核運行在 EL2，不打開 VHE 時內核運行在 EL1。客戶機
+內核總是運行在 EL1。
+
+對於宿主機，該屬性排除 EL1 和 VHE 上的 EL2。
+
+對於客戶機，該屬性排除 EL1。請注意客戶機從來不會運行在 EL2。
+
+
+exclude_hv
+----------
+
+該屬性排除虛擬機監控器。
+
+對於 VHE 宿主機該屬性將被忽略，此時我們認爲宿主機內核是虛擬機監
+控器。
+
+對於 non-VHE 宿主機該屬性將排除 EL2，因爲虛擬機監控器運行在 EL2
+的任何代碼主要用於客戶機和宿主機的切換。
+
+對於客戶機該屬性無效。請注意客戶機從來不會運行在 EL2。
+
+
+exclude_host / exclude_guest
+----------------------------
+
+這些屬性分別排除了 KVM 宿主機和客戶機。
+
+KVM 宿主機可能運行在 EL0（用戶空間），EL1（non-VHE 內核）和
+EL2（VHE 內核 或 non-VHE 虛擬機監控器）。
+
+KVM 客戶機可能運行在 EL0（用戶空間）和 EL1（內核）。
+
+由於宿主機和客戶機之間重疊的異常級別，我們不能僅僅依靠 PMU 的硬體異
+常過濾機制-因此我們必須啓用/禁用對於客戶機進入和退出的計數。而這在
+VHE 和 non-VHE 系統上表現不同。
+
+對於 non-VHE 系統的 exclude_host 屬性排除 EL2 - 在進入和退出客戶
+機時，我們會根據 exclude_host 和 exclude_guest 屬性在適當的情況下
+禁用/啓用該事件。
+
+對於 VHE 系統的 exclude_guest 屬性排除 EL1，而對其中的 exclude_host
+屬性同時排除 EL0，EL2。在進入和退出客戶機時，我們會適當地根據
+exclude_host 和 exclude_guest 屬性包括/排除 EL0。
+
+以上聲明也適用於在 not-VHE 客戶機使用這些屬性時，但是請注意客戶機從
+來不會運行在 EL2。
+
+
+準確性
+------
+
+在 non-VHE 宿主機上，我們在 EL2 進入/退出宿主機/客戶機的切換時啓用/
+關閉計數器 -但是在啓用/禁用計數器和進入/退出客戶機之間存在一段延時。
+對於 exclude_host， 我們可以通過過濾 EL2 消除在客戶機進入/退出邊界
+上用於計數客戶機事件的宿主機事件計數器。但是當使用 !exclude_hv 時，
+在客戶機進入/退出有一個小的停電窗口無法捕獲到宿主機的事件。
+
+在 VHE 系統沒有停電窗口。
+
diff --git a/Documentation/translations/zh_TW/arch/arm64/silicon-errata.txt b/Documentation/translations/zh_TW/arch/arm64/silicon-errata.txt
new file mode 100644
index 0000000000000..66c3a35064586
--- /dev/null
+++ b/Documentation/translations/zh_TW/arch/arm64/silicon-errata.txt
@@ -0,0 +1,79 @@
+SPDX-License-Identifier: GPL-2.0
+
+Chinese translated version of Documentation/arch/arm64/silicon-errata.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+M:	Will Deacon <will.deacon@arm.com>
+zh_CN:	Fu Wei <wefu@redhat.com>
+zh_TW:	Hu Haowen <src.res@email.cn>
+C:	1926e54f115725a9248d0c4c65c22acaf94de4c4
+---------------------------------------------------------------------
+Documentation/arch/arm64/silicon-errata.rst 的中文翻譯
+
+如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
+交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
+譯存在問題，請聯繫中文版維護者。
+
+英文版維護者： Will Deacon <will.deacon@arm.com>
+中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
+繁體中文版校譯者： 胡皓文  Hu Haowen <src.res@email.cn>
+本文翻譯提交時的 Git 檢出點爲： 1926e54f115725a9248d0c4c65c22acaf94de4c4
+
+以下爲正文
+---------------------------------------------------------------------
+                晶片勘誤和軟體補救措施
+                ==================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2015年11月27日
+
+一個不幸的現實：硬體經常帶有一些所謂的「瑕疵（errata）」，導致其在
+某些特定情況下會違背構架定義的行爲。就基於 ARM 的硬體而言，這些瑕疵
+大體可分爲以下幾類：
+
+  A 類：無可行補救措施的嚴重缺陷。
+  B 類：有可接受的補救措施的重大或嚴重缺陷。
+  C 類：在正常操作中不會顯現的小瑕疵。
+
+更多資訊，請在 infocenter.arm.com （需註冊）中查閱「軟體開發者勘誤
+筆記」（「Software Developers Errata Notice」）文檔。
+
+對於 Linux 而言，B 類缺陷可能需要作業系統的某些特別處理。例如，避免
+一個特殊的代碼序列，或是以一種特定的方式配置處理器。在某種不太常見的
+情況下，爲將 A 類缺陷當作 C 類處理，可能需要用類似的手段。這些手段被
+統稱爲「軟體補救措施」，且僅在少數情況需要（例如，那些需要一個運行在
+非安全異常級的補救措施 *並且* 能被 Linux 觸發的情況）。
+
+對於尚在討論中的可能對未受瑕疵影響的系統產生干擾的軟體補救措施，有一個
+相應的內核配置（Kconfig）選項被加在 「內核特性（Kernel Features）」->
+「基於可選方法框架的 ARM 瑕疵補救措施（ARM errata workarounds via
+the alternatives framework）"。這些選項被默認開啓，若探測到受影響的CPU，
+補丁將在運行時被使用。至於對系統運行影響較小的補救措施，內核配置選項
+並不存在，且代碼以某種規避瑕疵的方式被構造（帶注釋爲宜）。
+
+這種做法對於在任意內核原始碼樹中準確地判斷出哪個瑕疵已被軟體方法所補救
+稍微有點麻煩，所以在 Linux 內核中此文件作爲軟體補救措施的註冊表，
+並將在新的軟體補救措施被提交和向後移植（backported）到穩定內核時被更新。
+
+| 實現者         | 受影響的組件    | 勘誤編號        | 內核配置                |
++----------------+-----------------+-----------------+-------------------------+
+| ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319    |
+| ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319    |
+| ARM            | Cortex-A53      | #824069         | ARM64_ERRATUM_824069    |
+| ARM            | Cortex-A53      | #819472         | ARM64_ERRATUM_819472    |
+| ARM            | Cortex-A53      | #845719         | ARM64_ERRATUM_845719    |
+| ARM            | Cortex-A53      | #843419         | ARM64_ERRATUM_843419    |
+| ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075    |
+| ARM            | Cortex-A57      | #852523         | N/A                     |
+| ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220    |
+|                |                 |                 |                         |
+| Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375    |
+| Cavium         | ThunderX GICv3  | #23154          | CAVIUM_ERRATUM_23154    |
+
diff --git a/Documentation/translations/zh_TW/arch/arm64/tagged-pointers.txt b/Documentation/translations/zh_TW/arch/arm64/tagged-pointers.txt
new file mode 100644
index 0000000000000..b7f683f20ed14
--- /dev/null
+++ b/Documentation/translations/zh_TW/arch/arm64/tagged-pointers.txt
@@ -0,0 +1,57 @@
+SPDX-License-Identifier: GPL-2.0
+
+Chinese translated version of Documentation/arch/arm64/tagged-pointers.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Will Deacon <will.deacon@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+Traditional Chinese maintainer: Hu Haowen <src.res@email.cn>
+---------------------------------------------------------------------
+Documentation/arch/arm64/tagged-pointers.rst 的中文翻譯
+
+如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
+交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
+譯存在問題，請聯繫中文版維護者。
+
+英文版維護者： Will Deacon <will.deacon@arm.com>
+中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
+繁體中文版校譯者： 胡皓文  Hu Haowen <src.res@email.cn>
+
+以下爲正文
+---------------------------------------------------------------------
+		Linux 在 AArch64 中帶標記的虛擬地址
+		=================================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2013 年 06 月 12 日
+
+本文檔簡述了在 AArch64 地址轉換系統中提供的帶標記的虛擬地址及其在
+AArch64 Linux 中的潛在用途。
+
+內核提供的地址轉換表配置使通過 TTBR0 完成的虛擬地址轉換（即用戶空間
+映射），其虛擬地址的最高 8 位（63:56）會被轉換硬體所忽略。這種機制
+讓這些位可供應用程式自由使用，其注意事項如下：
+
+	(1) 內核要求所有傳遞到 EL1 的用戶空間地址帶有 0x00 標記。
+	    這意味著任何攜帶用戶空間虛擬地址的系統調用（syscall）
+	    參數 *必須* 在陷入內核前使它們的最高字節被清零。
+
+	(2) 非零標記在傳遞信號時不被保存。這意味著在應用程式中利用了
+	    標記的信號處理函數無法依賴 siginfo_t 的用戶空間虛擬
+	    地址所攜帶的包含其內部域信息的標記。此規則的一個例外是
+	    當信號是在調試觀察點的異常處理程序中產生的，此時標記的
+	    信息將被保存。
+
+	(3) 當使用帶標記的指針時需特別留心，因爲僅對兩個虛擬地址
+	    的高字節，C 編譯器很可能無法判斷它們是不同的。
+
+此構架會阻止對帶標記的 PC 指針的利用，因此在異常返回時，其高字節
+將被設置成一個爲 「55」 的擴展符。
+
diff --git a/Documentation/translations/zh_TW/arm64/amu.rst b/Documentation/translations/zh_TW/arm64/amu.rst
deleted file mode 100644
index ffdc466e0f62b..0000000000000
--- a/Documentation/translations/zh_TW/arm64/amu.rst
+++ /dev/null
@@ -1,104 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: ../disclaimer-zh_TW.rst
-
-:Original: :ref:`Documentation/arm64/amu.rst <amu_index>`
-
-Translator: Bailu Lin <bailu.lin@vivo.com>
-            Hu Haowen <src.res@email.cn>
-
-==================================
-AArch64 Linux 中擴展的活動監控單元
-==================================
-
-作者: Ionela Voinescu <ionela.voinescu@arm.com>
-
-日期: 2019-09-10
-
-本文檔簡要描述了 AArch64 Linux 支持的活動監控單元的規範。
-
-
-架構總述
---------
-
-活動監控是 ARMv8.4 CPU 架構引入的一個可選擴展特性。
-
-活動監控單元(在每個 CPU 中實現)爲系統管理提供了性能計數器。既可以通
-過系統寄存器的方式訪問計數器，同時也支持外部內存映射的方式訪問計數器。
-
-AMUv1 架構實現了一個由4個固定的64位事件計數器組成的計數器組。
-
-  - CPU 周期計數器：同 CPU 的頻率增長
-  - 常量計數器：同固定的系統時鐘頻率增長
-  - 淘汰指令計數器: 同每次架構指令執行增長
-  - 內存停頓周期計數器：計算由在時鐘域內的最後一級緩存中未命中而引起
-    的指令調度停頓周期數
-
-當處於 WFI 或者 WFE 狀態時，計數器不會增長。
-
-AMU 架構提供了一個高達16位的事件計數器空間，未來新的 AMU 版本中可能
-用它來實現新增的事件計數器。
-
-另外，AMUv1 實現了一個多達16個64位輔助事件計數器的計數器組。
-
-冷復位時所有的計數器會清零。
-
-
-基本支持
---------
-
-內核可以安全地運行在支持 AMU 和不支持 AMU 的 CPU 組合中。
-因此，當配置 CONFIG_ARM64_AMU_EXTN 後我們無條件使能後續
-(secondary or hotplugged) CPU 檢測和使用這個特性。
-
-當在 CPU 上檢測到該特性時，我們會標記爲特性可用但是不能保證計數器的功能，
-僅表明有擴展屬性。
-
-固件(代碼運行在高異常級別，例如 arm-tf )需支持以下功能：
-
- - 提供低異常級別(EL2 和 EL1)訪問 AMU 寄存器的能力。
- - 使能計數器。如果未使能，它的值應爲 0。
- - 在從電源關閉狀態啓動 CPU 前或後保存或者恢復計數器。
-
-當使用使能了該特性的內核啓動但固件損壞時，訪問計數器寄存器可能會遭遇
-panic 或者死鎖。即使未發現這些症狀，計數器寄存器返回的數據結果並不一
-定能反映真實情況。通常，計數器會返回 0，表明他們未被使能。
-
-如果固件沒有提供適當的支持最好關閉 CONFIG_ARM64_AMU_EXTN。
-值得注意的是，出於安全原因，不要繞過 AMUSERRENR_EL0 設置而捕獲從
-EL0(用戶空間) 訪問 EL1(內核空間)。 因此，固件應該確保訪問 AMU寄存器
-不會困在 EL2或EL3。
-
-AMUv1 的固定計數器可以通過如下系統寄存器訪問：
-
- - SYS_AMEVCNTR0_CORE_EL0
- - SYS_AMEVCNTR0_CONST_EL0
- - SYS_AMEVCNTR0_INST_RET_EL0
- - SYS_AMEVCNTR0_MEM_STALL_EL0
-
-特定輔助計數器可以通過 SYS_AMEVCNTR1_EL0(n) 訪問，其中n介於0到15。
-
-詳細信息定義在目錄：arch/arm64/include/asm/sysreg.h。
-
-
-用戶空間訪問
-------------
-
-由於以下原因，當前禁止從用戶空間訪問 AMU 的寄存器：
-
-  - 安全因數：可能會暴露處於安全模式執行的代碼信息。
-  - 意願：AMU 是用於系統管理的。
-
-同樣，該功能對用戶空間不可見。
-
-
-虛擬化
-------
-
-由於以下原因，當前禁止從 KVM 客戶端的用戶空間(EL0)和內核空間(EL1)
-訪問 AMU 的寄存器：
-
-  - 安全因數：可能會暴露給其他客戶端或主機端執行的代碼信息。
-
-任何試圖訪問 AMU 寄存器的行爲都會觸發一個註冊在客戶端的未定義異常。
-
diff --git a/Documentation/translations/zh_TW/arm64/booting.txt b/Documentation/translations/zh_TW/arm64/booting.txt
deleted file mode 100644
index b9439dd540126..0000000000000
--- a/Documentation/translations/zh_TW/arm64/booting.txt
+++ /dev/null
@@ -1,251 +0,0 @@
-SPDX-License-Identifier: GPL-2.0
-
-Chinese translated version of Documentation/arm64/booting.rst
-
-If you have any comment or update to the content, please contact the
-original document maintainer directly.  However, if you have a problem
-communicating in English you can also ask the Chinese maintainer for
-help.  Contact the Chinese maintainer if this translation is outdated
-or if there is a problem with the translation.
-
-M:	Will Deacon <will.deacon@arm.com>
-zh_CN:	Fu Wei <wefu@redhat.com>
-zh_TW:	Hu Haowen <src.res@email.cn>
-C:	55f058e7574c3615dea4615573a19bdb258696c6
----------------------------------------------------------------------
-Documentation/arm64/booting.rst 的中文翻譯
-
-如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
-交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
-譯存在問題，請聯繫中文版維護者。
-
-英文版維護者： Will Deacon <will.deacon@arm.com>
-中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
-中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
-中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
-繁體中文版校譯者： 胡皓文  Hu Haowen <src.res@email.cn>
-本文翻譯提交時的 Git 檢出點爲： 55f058e7574c3615dea4615573a19bdb258696c6
-
-以下爲正文
----------------------------------------------------------------------
-			啓動 AArch64 Linux
-			==================
-
-作者: Will Deacon <will.deacon@arm.com>
-日期: 2012 年 09 月 07 日
-
-本文檔基於 Russell King 的 ARM 啓動文檔，且適用於所有公開發布的
-AArch64 Linux 內核代碼。
-
-AArch64 異常模型由多個異常級（EL0 - EL3）組成，對於 EL0 和 EL1 異常級
-有對應的安全和非安全模式。EL2 是系統管理級，且僅存在於非安全模式下。
-EL3 是最高特權級，且僅存在於安全模式下。
-
-基於本文檔的目的，我們將簡單地使用『引導裝載程序』（『boot loader』）
-這個術語來定義在將控制權交給 Linux 內核前 CPU 上執行的所有軟體。
-這可能包含安全監控和系統管理代碼，或者它可能只是一些用於準備最小啓動
-環境的指令。
-
-基本上，引導裝載程序（至少）應實現以下操作：
-
-1、設置和初始化 RAM
-2、設置設備樹數據
-3、解壓內核映像
-4、調用內核映像
-
-
-1、設置和初始化 RAM
------------------
-
-必要性: 強制
-
-引導裝載程序應該找到並初始化系統中所有內核用於保持系統變量數據的 RAM。
-這個操作的執行方式因設備而異。（它可能使用內部算法來自動定位和計算所有
-RAM，或可能使用對這個設備已知的 RAM 信息，還可能是引導裝載程序設計者
-想到的任何合適的方法。）
-
-
-2、設置設備樹數據
----------------
-
-必要性: 強制
-
-設備樹數據塊（dtb）必須 8 字節對齊，且大小不能超過 2MB。由於設備樹
-數據塊將在使能緩存的情況下以 2MB 粒度被映射，故其不能被置於必須以特定
-屬性映射的2M區域內。
-
-註： v4.2 之前的版本同時要求設備樹數據塊被置於從內核映像以下
-text_offset 字節處算起第一個 512MB 內。
-
-3、解壓內核映像
--------------
-
-必要性: 可選
-
-AArch64 內核當前沒有提供自解壓代碼，因此如果使用了壓縮內核映像文件
-（比如 Image.gz），則需要通過引導裝載程序（使用 gzip 等）來進行解壓。
-若引導裝載程序沒有實現這個功能，就要使用非壓縮內核映像文件。
-
-
-4、調用內核映像
--------------
-
-必要性: 強制
-
-已解壓的內核映像包含一個 64 字節的頭，內容如下：
-
-  u32 code0;			/* 可執行代碼 */
-  u32 code1;			/* 可執行代碼 */
-  u64 text_offset;		/* 映像裝載偏移，小端模式 */
-  u64 image_size;		/* 映像實際大小, 小端模式 */
-  u64 flags;			/* 內核旗標, 小端模式 *
-  u64 res2	= 0;		/* 保留 */
-  u64 res3	= 0;		/* 保留 */
-  u64 res4	= 0;		/* 保留 */
-  u32 magic	= 0x644d5241;	/* 魔數, 小端, "ARM\x64" */
-  u32 res5;			/* 保留 （用於 PE COFF 偏移） */
-
-
-映像頭注釋：
-
-- 自 v3.17 起，除非另有說明，所有域都是小端模式。
-
-- code0/code1 負責跳轉到 stext.
-
-- 當通過 EFI 啓動時， 最初 code0/code1 被跳過。
-  res5 是到 PE 文件頭的偏移，而 PE 文件頭含有 EFI 的啓動入口點
-  （efi_stub_entry）。當 stub 代碼完成了它的使命，它會跳轉到 code0
-  繼續正常的啓動流程。
-
-- v3.17 之前，未明確指定 text_offset 的字節序。此時，image_size 爲零，
-  且 text_offset 依照內核字節序爲 0x80000。
-  當 image_size 非零，text_offset 爲小端模式且是有效值，應被引導加載
-  程序使用。當 image_size 爲零，text_offset 可假定爲 0x80000。
-
-- flags 域 (v3.17 引入) 爲 64 位小端模式，其編碼如下：
-  位 0: 	內核字節序。 1 表示大端模式，0 表示小端模式。
-  位 1-2:	內核頁大小。
-			0 - 未指定。
-			1 - 4K
-			2 - 16K
-			3 - 64K
-  位 3:		內核物理位置
-			0 - 2MB 對齊基址應儘量靠近內存起始處，因爲
-			    其基址以下的內存無法通過線性映射訪問
-			1 - 2MB 對齊基址可以在物理內存的任意位置
-  位 4-63:	保留。
-
-- 當 image_size 爲零時，引導裝載程序應試圖在內核映像末尾之後儘可能
-  多地保留空閒內存供內核直接使用。對內存空間的需求量因所選定的內核
-  特性而異, 並無實際限制。
-
-內核映像必須被放置在任意一個可用系統內存 2MB 對齊基址的 text_offset
-字節處，並從該處被調用。2MB 對齊基址和內核映像起始地址之間的區域對於
-內核來說沒有特殊意義，且可能被用於其他目的。
-從映像起始地址算起，最少必須準備 image_size 字節的空閒內存供內核使用。
-註： v4.6 之前的版本無法使用內核映像物理偏移以下的內存，所以當時建議
-將映像儘量放置在靠近系統內存起始的地方。
-
-任何提供給內核的內存（甚至在映像起始地址之前），若未從內核中標記爲保留
-(如在設備樹（dtb）的 memreserve 區域），都將被認爲對內核是可用。
-
-在跳轉入內核前，必須符合以下狀態：
-
-- 停止所有 DMA 設備，這樣內存數據就不會因爲虛假網絡包或磁碟數據而
-  被破壞。這可能可以節省你許多的調試時間。
-
-- 主 CPU 通用寄存器設置
-  x0 = 系統 RAM 中設備樹數據塊（dtb）的物理地址。
-  x1 = 0 (保留，將來可能使用)
-  x2 = 0 (保留，將來可能使用)
-  x3 = 0 (保留，將來可能使用)
-
-- CPU 模式
-  所有形式的中斷必須在 PSTATE.DAIF 中被屏蔽（Debug、SError、IRQ
-  和 FIQ）。
-  CPU 必須處於 EL2（推薦，可訪問虛擬化擴展）或非安全 EL1 模式下。
-
-- 高速緩存、MMU
-  MMU 必須關閉。
-  指令緩存開啓或關閉皆可。
-  已載入的內核映像的相應內存區必須被清理，以達到緩存一致性點（PoC）。
-  當存在系統緩存或其他使能緩存的一致性主控器時，通常需使用虛擬地址
-  維護其緩存，而非 set/way 操作。
-  遵從通過虛擬地址操作維護構架緩存的系統緩存必須被配置，並可以被使能。
-  而不通過虛擬地址操作維護構架緩存的系統緩存（不推薦），必須被配置且
-  禁用。
-
-  *譯者註：對於 PoC 以及緩存相關內容，請參考 ARMv8 構架參考手冊
-   ARM DDI 0487A
-
-- 架構計時器
-  CNTFRQ 必須設定爲計時器的頻率，且 CNTVOFF 必須設定爲對所有 CPU
-  都一致的值。如果在 EL1 模式下進入內核，則 CNTHCTL_EL2 中的
-  EL1PCTEN (bit 0) 必須置位。
-
-- 一致性
-  通過內核啓動的所有 CPU 在內核入口地址上必須處於相同的一致性域中。
-  這可能要根據具體實現來定義初始化過程，以使能每個CPU上對維護操作的
-  接收。
-
-- 系統寄存器
-  在進入內核映像的異常級中，所有構架中可寫的系統寄存器必須通過軟體
-  在一個更高的異常級別下初始化，以防止在 未知 狀態下運行。
-
-  對於擁有 GICv3 中斷控制器並以 v3 模式運行的系統：
-  - 如果 EL3 存在：
-    ICC_SRE_EL3.Enable (位 3) 必須初始化爲 0b1。
-    ICC_SRE_EL3.SRE (位 0) 必須初始化爲 0b1。
-  - 若內核運行在 EL1：
-    ICC_SRE_EL2.Enable (位 3) 必須初始化爲 0b1。
-    ICC_SRE_EL2.SRE (位 0) 必須初始化爲 0b1。
-  - 設備樹（DT）或 ACPI 表必須描述一個 GICv3 中斷控制器。
-
-  對於擁有 GICv3 中斷控制器並以兼容（v2）模式運行的系統：
-  - 如果 EL3 存在：
-    ICC_SRE_EL3.SRE (位 0) 必須初始化爲 0b0。
-  - 若內核運行在 EL1：
-    ICC_SRE_EL2.SRE (位 0) 必須初始化爲 0b0。
-  - 設備樹（DT）或 ACPI 表必須描述一個 GICv2 中斷控制器。
-
-以上對於 CPU 模式、高速緩存、MMU、架構計時器、一致性、系統寄存器的
-必要條件描述適用於所有 CPU。所有 CPU 必須在同一異常級別跳入內核。
-
-引導裝載程序必須在每個 CPU 處於以下狀態時跳入內核入口：
-
-- 主 CPU 必須直接跳入內核映像的第一條指令。通過此 CPU 傳遞的設備樹
-  數據塊必須在每個 CPU 節點中包含一個 『enable-method』 屬性，所
-  支持的 enable-method 請見下文。
-
-  引導裝載程序必須生成這些設備樹屬性，並在跳入內核入口之前將其插入
-  數據塊。
-
-- enable-method 爲 「spin-table」 的 CPU 必須在它們的 CPU
-  節點中包含一個 『cpu-release-addr』 屬性。這個屬性標識了一個
-  64 位自然對齊且初始化爲零的內存位置。
-
-  這些 CPU 必須在內存保留區（通過設備樹中的 /memreserve/ 域傳遞
-  給內核）中自旋於內核之外，輪詢它們的 cpu-release-addr 位置（必須
-  包含在保留區中）。可通過插入 wfe 指令來降低忙循環開銷，而主 CPU 將
-  發出 sev 指令。當對 cpu-release-addr 所指位置的讀取操作返回非零值
-  時，CPU 必須跳入此值所指向的地址。此值爲一個單獨的 64 位小端值，
-  因此 CPU 須在跳轉前將所讀取的值轉換爲其本身的端模式。
-
-- enable-method 爲 「psci」 的 CPU 保持在內核外（比如，在
-  memory 節點中描述爲內核空間的內存區外，或在通過設備樹 /memreserve/
-  域中描述爲內核保留區的空間中）。內核將會發起在 ARM 文檔（編號
-  ARM DEN 0022A：用於 ARM 上的電源狀態協調接口系統軟體）中描述的
-  CPU_ON 調用來將 CPU 帶入內核。
-
-  *譯者注: ARM DEN 0022A 已更新到 ARM DEN 0022C。
-
-  設備樹必須包含一個 『psci』 節點，請參考以下文檔：
-  Documentation/devicetree/bindings/arm/psci.yaml
-
-
-- 輔助 CPU 通用寄存器設置
-  x0 = 0 (保留，將來可能使用)
-  x1 = 0 (保留，將來可能使用)
-  x2 = 0 (保留，將來可能使用)
-  x3 = 0 (保留，將來可能使用)
-
diff --git a/Documentation/translations/zh_TW/arm64/elf_hwcaps.rst b/Documentation/translations/zh_TW/arm64/elf_hwcaps.rst
deleted file mode 100644
index 3eb1c623ce31b..0000000000000
--- a/Documentation/translations/zh_TW/arm64/elf_hwcaps.rst
+++ /dev/null
@@ -1,244 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: ../disclaimer-zh_TW.rst
-
-:Original: :ref:`Documentation/arm64/elf_hwcaps.rst <elf_hwcaps_index>`
-
-Translator: Bailu Lin <bailu.lin@vivo.com>
-            Hu Haowen <src.res@email.cn>
-
-================
-ARM64 ELF hwcaps
-================
-
-這篇文檔描述了 arm64 ELF hwcaps 的用法和語義。
-
-
-1. 簡介
--------
-
-有些硬體或軟體功能僅在某些 CPU 實現上和/或在具體某個內核配置上可用，但
-對於處於 EL0 的用戶空間代碼沒有可用的架構發現機制。內核通過在輔助向量表
-公開一組稱爲 hwcaps 的標誌而把這些功能暴露給用戶空間。
-
-用戶空間軟體可以通過獲取輔助向量的 AT_HWCAP 或 AT_HWCAP2 條目來測試功能，
-並測試是否設置了相關標誌，例如::
-
-	bool floating_point_is_present(void)
-	{
-		unsigned long hwcaps = getauxval(AT_HWCAP);
-		if (hwcaps & HWCAP_FP)
-			return true;
-
-		return false;
-	}
-
-如果軟體依賴於 hwcap 描述的功能，在嘗試使用該功能前則應檢查相關的 hwcap
-標誌以驗證該功能是否存在。
-
-不能通過其他方式探查這些功能。當一個功能不可用時，嘗試使用它可能導致不可
-預測的行爲，並且無法保證能確切的知道該功能不可用，例如 SIGILL。
-
-
-2. Hwcaps 的說明
-----------------
-
-大多數 hwcaps 旨在說明通過架構 ID 寄存器(處於 EL0 的用戶空間代碼無法訪問)
-描述的功能的存在。這些 hwcap 通過 ID 寄存器欄位定義，並且應根據 ARM 體系
-結構參考手冊（ARM ARM）中定義的欄位來解釋說明。
-
-這些 hwcaps 以下面的形式描述::
-
-    idreg.field == val 表示有某個功能。
-
-當 idreg.field 中有 val 時，hwcaps 表示 ARM ARM 定義的功能是有效的，但是
-並不是說要完全和 val 相等，也不是說 idreg.field 描述的其他功能就是缺失的。
-
-其他 hwcaps 可能表明無法僅由 ID 寄存器描述的功能的存在。這些 hwcaps 可能
-沒有被 ID 寄存器描述，需要參考其他文檔。
-
-
-3. AT_HWCAP 中揭示的 hwcaps
----------------------------
-
-HWCAP_FP
-    ID_AA64PFR0_EL1.FP == 0b0000 表示有此功能。
-
-HWCAP_ASIMD
-    ID_AA64PFR0_EL1.AdvSIMD == 0b0000 表示有此功能。
-
-HWCAP_EVTSTRM
-    通用計時器頻率配置爲大約100KHz以生成事件。
-
-HWCAP_AES
-    ID_AA64ISAR0_EL1.AES == 0b0001 表示有此功能。
-
-HWCAP_PMULL
-    ID_AA64ISAR0_EL1.AES == 0b0010 表示有此功能。
-
-HWCAP_SHA1
-    ID_AA64ISAR0_EL1.SHA1 == 0b0001 表示有此功能。
-
-HWCAP_SHA2
-    ID_AA64ISAR0_EL1.SHA2 == 0b0001 表示有此功能。
-
-HWCAP_CRC32
-    ID_AA64ISAR0_EL1.CRC32 == 0b0001 表示有此功能。
-
-HWCAP_ATOMICS
-    ID_AA64ISAR0_EL1.Atomic == 0b0010 表示有此功能。
-
-HWCAP_FPHP
-    ID_AA64PFR0_EL1.FP == 0b0001 表示有此功能。
-
-HWCAP_ASIMDHP
-    ID_AA64PFR0_EL1.AdvSIMD == 0b0001 表示有此功能。
-
-HWCAP_CPUID
-    根據 Documentation/arm64/cpu-feature-registers.rst 描述，EL0 可以訪問
-    某些 ID 寄存器。
-
-    這些 ID 寄存器可能表示功能的可用性。
-
-HWCAP_ASIMDRDM
-    ID_AA64ISAR0_EL1.RDM == 0b0001 表示有此功能。
-
-HWCAP_JSCVT
-    ID_AA64ISAR1_EL1.JSCVT == 0b0001 表示有此功能。
-
-HWCAP_FCMA
-    ID_AA64ISAR1_EL1.FCMA == 0b0001 表示有此功能。
-
-HWCAP_LRCPC
-    ID_AA64ISAR1_EL1.LRCPC == 0b0001 表示有此功能。
-
-HWCAP_DCPOP
-    ID_AA64ISAR1_EL1.DPB == 0b0001 表示有此功能。
-
-HWCAP_SHA3
-    ID_AA64ISAR0_EL1.SHA3 == 0b0001 表示有此功能。
-
-HWCAP_SM3
-    ID_AA64ISAR0_EL1.SM3 == 0b0001 表示有此功能。
-
-HWCAP_SM4
-    ID_AA64ISAR0_EL1.SM4 == 0b0001 表示有此功能。
-
-HWCAP_ASIMDDP
-    ID_AA64ISAR0_EL1.DP == 0b0001 表示有此功能。
-
-HWCAP_SHA512
-    ID_AA64ISAR0_EL1.SHA2 == 0b0010 表示有此功能。
-
-HWCAP_SVE
-    ID_AA64PFR0_EL1.SVE == 0b0001 表示有此功能。
-
-HWCAP_ASIMDFHM
-    ID_AA64ISAR0_EL1.FHM == 0b0001 表示有此功能。
-
-HWCAP_DIT
-    ID_AA64PFR0_EL1.DIT == 0b0001 表示有此功能。
-
-HWCAP_USCAT
-    ID_AA64MMFR2_EL1.AT == 0b0001 表示有此功能。
-
-HWCAP_ILRCPC
-    ID_AA64ISAR1_EL1.LRCPC == 0b0010 表示有此功能。
-
-HWCAP_FLAGM
-    ID_AA64ISAR0_EL1.TS == 0b0001 表示有此功能。
-
-HWCAP_SSBS
-    ID_AA64PFR1_EL1.SSBS == 0b0010 表示有此功能。
-
-HWCAP_SB
-    ID_AA64ISAR1_EL1.SB == 0b0001 表示有此功能。
-
-HWCAP_PACA
-    如 Documentation/arm64/pointer-authentication.rst 所描述，
-    ID_AA64ISAR1_EL1.APA == 0b0001 或 ID_AA64ISAR1_EL1.API == 0b0001
-    表示有此功能。
-
-HWCAP_PACG
-    如 Documentation/arm64/pointer-authentication.rst 所描述，
-    ID_AA64ISAR1_EL1.GPA == 0b0001 或 ID_AA64ISAR1_EL1.GPI == 0b0001
-    表示有此功能。
-
-HWCAP2_DCPODP
-
-    ID_AA64ISAR1_EL1.DPB == 0b0010 表示有此功能。
-
-HWCAP2_SVE2
-
-    ID_AA64ZFR0_EL1.SVEVer == 0b0001 表示有此功能。
-
-HWCAP2_SVEAES
-
-    ID_AA64ZFR0_EL1.AES == 0b0001 表示有此功能。
-
-HWCAP2_SVEPMULL
-
-    ID_AA64ZFR0_EL1.AES == 0b0010 表示有此功能。
-
-HWCAP2_SVEBITPERM
-
-    ID_AA64ZFR0_EL1.BitPerm == 0b0001 表示有此功能。
-
-HWCAP2_SVESHA3
-
-    ID_AA64ZFR0_EL1.SHA3 == 0b0001 表示有此功能。
-
-HWCAP2_SVESM4
-
-    ID_AA64ZFR0_EL1.SM4 == 0b0001 表示有此功能。
-
-HWCAP2_FLAGM2
-
-    ID_AA64ISAR0_EL1.TS == 0b0010 表示有此功能。
-
-HWCAP2_FRINT
-
-    ID_AA64ISAR1_EL1.FRINTTS == 0b0001 表示有此功能。
-
-HWCAP2_SVEI8MM
-
-    ID_AA64ZFR0_EL1.I8MM == 0b0001 表示有此功能。
-
-HWCAP2_SVEF32MM
-
-    ID_AA64ZFR0_EL1.F32MM == 0b0001 表示有此功能。
-
-HWCAP2_SVEF64MM
-
-    ID_AA64ZFR0_EL1.F64MM == 0b0001 表示有此功能。
-
-HWCAP2_SVEBF16
-
-    ID_AA64ZFR0_EL1.BF16 == 0b0001 表示有此功能。
-
-HWCAP2_I8MM
-
-    ID_AA64ISAR1_EL1.I8MM == 0b0001 表示有此功能。
-
-HWCAP2_BF16
-
-    ID_AA64ISAR1_EL1.BF16 == 0b0001 表示有此功能。
-
-HWCAP2_DGH
-
-    ID_AA64ISAR1_EL1.DGH == 0b0001 表示有此功能。
-
-HWCAP2_RNG
-
-    ID_AA64ISAR0_EL1.RNDR == 0b0001 表示有此功能。
-
-HWCAP2_BTI
-
-    ID_AA64PFR0_EL1.BT == 0b0001 表示有此功能。
-
-
-4. 未使用的 AT_HWCAP 位
------------------------
-
-爲了與用戶空間交互，內核保證 AT_HWCAP 的第62、63位將始終返回0。
-
diff --git a/Documentation/translations/zh_TW/arm64/hugetlbpage.rst b/Documentation/translations/zh_TW/arm64/hugetlbpage.rst
deleted file mode 100644
index 846b500dae97c..0000000000000
--- a/Documentation/translations/zh_TW/arm64/hugetlbpage.rst
+++ /dev/null
@@ -1,49 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: ../disclaimer-zh_TW.rst
-
-:Original: :ref:`Documentation/arm64/hugetlbpage.rst <hugetlbpage_index>`
-
-Translator: Bailu Lin <bailu.lin@vivo.com>
-            Hu Haowen <src.res@email.cn>
-
-=====================
-ARM64中的 HugeTLBpage
-=====================
-
-大頁依靠有效利用 TLBs 來提高地址翻譯的性能。這取決於以下
-兩點 -
-
-  - 大頁的大小
-  - TLBs 支持的條目大小
-
-ARM64 接口支持2種大頁方式。
-
-1) pud/pmd 級別的塊映射
------------------------
-
-這是常規大頁，他們的 pmd 或 pud 頁面表條目指向一個內存塊。
-不管 TLB 中支持的條目大小如何，塊映射可以減少翻譯大頁地址
-所需遍歷的頁表深度。
-
-2) 使用連續位
--------------
-
-架構中轉換頁表條目(D4.5.3, ARM DDI 0487C.a)中提供一個連續
-位告訴 MMU 這個條目是一個連續條目集的一員，它可以被緩存在單
-個 TLB 條目中。
-
-在 Linux 中連續位用來增加 pmd 和 pte(最後一級)級別映射的大
-小。受支持的連續頁表條目數量因頁面大小和頁表級別而異。
-
-
-支持以下大頁尺寸配置 -
-
-  ====== ========   ====    ========    ===
-  -      CONT PTE    PMD    CONT PMD    PUD
-  ====== ========   ====    ========    ===
-  4K:         64K     2M         32M     1G
-  16K:         2M    32M          1G
-  64K:         2M   512M         16G
-  ====== ========   ====    ========    ===
-
diff --git a/Documentation/translations/zh_TW/arm64/index.rst b/Documentation/translations/zh_TW/arm64/index.rst
deleted file mode 100644
index 2322783f3881c..0000000000000
--- a/Documentation/translations/zh_TW/arm64/index.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: ../disclaimer-zh_TW.rst
-
-:Original: :ref:`Documentation/arm64/index.rst <arm64_index>`
-:Translator: Bailu Lin <bailu.lin@vivo.com>
-             Hu Haowen <src.res@email.cn>
-
-.. _tw_arm64_index:
-
-
-==========
-ARM64 架構
-==========
-
-.. toctree::
-    :maxdepth: 2
-
-    amu
-    hugetlbpage
-    perf
-    elf_hwcaps
-
diff --git a/Documentation/translations/zh_TW/arm64/legacy_instructions.txt b/Documentation/translations/zh_TW/arm64/legacy_instructions.txt
deleted file mode 100644
index 6d4454f77b9e2..0000000000000
--- a/Documentation/translations/zh_TW/arm64/legacy_instructions.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-SPDX-License-Identifier: GPL-2.0
-
-Chinese translated version of Documentation/arm64/legacy_instructions.rst
-
-If you have any comment or update to the content, please contact the
-original document maintainer directly.  However, if you have a problem
-communicating in English you can also ask the Chinese maintainer for
-help.  Contact the Chinese maintainer if this translation is outdated
-or if there is a problem with the translation.
-
-Maintainer: Punit Agrawal <punit.agrawal@arm.com>
-            Suzuki K. Poulose <suzuki.poulose@arm.com>
-Chinese maintainer: Fu Wei <wefu@redhat.com>
-Traditional Chinese maintainer: Hu Haowen <src.res@email.cn>
----------------------------------------------------------------------
-Documentation/arm64/legacy_instructions.rst 的中文翻譯
-
-如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
-交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
-譯存在問題，請聯繫中文版維護者。
-
-本文翻譯提交時的 Git 檢出點爲： bc465aa9d045feb0e13b4a8f32cc33c1943f62d6
-
-英文版維護者： Punit Agrawal <punit.agrawal@arm.com>
-            Suzuki K. Poulose <suzuki.poulose@arm.com>
-中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
-中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
-中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
-繁體中文版校譯者：胡皓文  Hu Haowen <src.res@email.cn>
-
-以下爲正文
----------------------------------------------------------------------
-Linux 內核在 arm64 上的移植提供了一個基礎框架，以支持構架中正在被淘汰或已廢棄指令的模擬執行。
-這個基礎框架的代碼使用未定義指令鉤子（hooks）來支持模擬。如果指令存在，它也允許在硬體中啓用該指令。
-
-模擬模式可通過寫 sysctl 節點（/proc/sys/abi）來控制。
-不同的執行方式及 sysctl 節點的相應值，解釋如下：
-
-* Undef（未定義）
-  值： 0
-  產生未定義指令終止異常。它是那些構架中已廢棄的指令，如 SWP，的默認處理方式。
-
-* Emulate（模擬）
-  值： 1
-  使用軟體模擬方式。爲解決軟體遷移問題，這種模擬指令模式的使用是被跟蹤的，並會發出速率限制警告。
-  它是那些構架中正在被淘汰的指令，如 CP15 barriers（隔離指令），的默認處理方式。
-
-* Hardware Execution（硬體執行）
-  值： 2
-  雖然標記爲正在被淘汰，但一些實現可能提供硬體執行這些指令的使能/禁用操作。
-  使用硬體執行一般會有更好的性能，但將無法收集運行時對正被淘汰指令的使用統計數據。
-
-默認執行模式依賴於指令在構架中狀態。正在被淘汰的指令應該以模擬（Emulate）作爲默認模式，
-而已廢棄的指令必須默認使用未定義（Undef）模式
-
-注意：指令模擬可能無法應對所有情況。更多詳情請參考單獨的指令注釋。
-
-受支持的遺留指令
--------------
-* SWP{B}
-節點: /proc/sys/abi/swp
-狀態: 已廢棄
-默認執行方式: Undef (0)
-
-* CP15 Barriers
-節點: /proc/sys/abi/cp15_barrier
-狀態: 正被淘汰，不推薦使用
-默認執行方式: Emulate (1)
-
-* SETEND
-節點: /proc/sys/abi/setend
-狀態: 正被淘汰，不推薦使用
-默認執行方式: Emulate (1)*
-註：爲了使能這個特性，系統中的所有 CPU 必須在 EL0 支持混合字節序。
-如果一個新的 CPU （不支持混合字節序） 在使能這個特性後被熱插入系統，
-在應用中可能會出現不可預期的結果。
-
diff --git a/Documentation/translations/zh_TW/arm64/memory.txt b/Documentation/translations/zh_TW/arm64/memory.txt
deleted file mode 100644
index 99c2b78b56749..0000000000000
--- a/Documentation/translations/zh_TW/arm64/memory.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-SPDX-License-Identifier: GPL-2.0
-
-Chinese translated version of Documentation/arm64/memory.rst
-
-If you have any comment or update to the content, please contact the
-original document maintainer directly.  However, if you have a problem
-communicating in English you can also ask the Chinese maintainer for
-help.  Contact the Chinese maintainer if this translation is outdated
-or if there is a problem with the translation.
-
-Maintainer: Catalin Marinas <catalin.marinas@arm.com>
-Chinese maintainer: Fu Wei <wefu@redhat.com>
-Traditional Chinese maintainer: Hu Haowen <src.res@email.cn>
----------------------------------------------------------------------
-Documentation/arm64/memory.rst 的中文翻譯
-
-如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
-交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
-譯存在問題，請聯繫中文版維護者。
-
-本文翻譯提交時的 Git 檢出點爲： bc465aa9d045feb0e13b4a8f32cc33c1943f62d6
-
-英文版維護者： Catalin Marinas <catalin.marinas@arm.com>
-中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
-中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
-中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
-繁體中文版校譯者： 胡皓文  Hu Haowen <src.res@email.cn>
-
-以下爲正文
----------------------------------------------------------------------
-		     Linux 在 AArch64 中的內存布局
-		     ===========================
-
-作者: Catalin Marinas <catalin.marinas@arm.com>
-
-本文檔描述 AArch64 Linux 內核所使用的虛擬內存布局。此構架可以實現
-頁大小爲 4KB 的 4 級轉換表和頁大小爲 64KB 的 3 級轉換表。
-
-AArch64 Linux 使用 3 級或 4 級轉換表，其頁大小配置爲 4KB，對於用戶和內核
-分別都有 39-bit (512GB) 或 48-bit (256TB) 的虛擬地址空間。
-對於頁大小爲 64KB的配置，僅使用 2 級轉換表，有 42-bit (4TB) 的虛擬地址空間，但內存布局相同。
-
-用戶地址空間的 63:48 位爲 0，而內核地址空間的相應位爲 1。TTBRx 的
-選擇由虛擬地址的 63 位給出。swapper_pg_dir 僅包含內核（全局）映射，
-而用戶 pgd 僅包含用戶（非全局）映射。swapper_pg_dir 地址被寫入
-TTBR1 中，且從不寫入 TTBR0。
-
-
-AArch64 Linux 在頁大小爲 4KB，並使用 3 級轉換表時的內存布局：
-
-起始地址			結束地址			大小		用途
------------------------------------------------------------------------
-0000000000000000	0000007fffffffff	 512GB		用戶空間
-ffffff8000000000	ffffffffffffffff	 512GB		內核空間
-
-
-AArch64 Linux 在頁大小爲 4KB，並使用 4 級轉換表時的內存布局：
-
-起始地址			結束地址			大小		用途
------------------------------------------------------------------------
-0000000000000000	0000ffffffffffff	 256TB		用戶空間
-ffff000000000000	ffffffffffffffff	 256TB		內核空間
-
-
-AArch64 Linux 在頁大小爲 64KB，並使用 2 級轉換表時的內存布局：
-
-起始地址			結束地址			大小		用途
------------------------------------------------------------------------
-0000000000000000	000003ffffffffff	   4TB		用戶空間
-fffffc0000000000	ffffffffffffffff	   4TB		內核空間
-
-
-AArch64 Linux 在頁大小爲 64KB，並使用 3 級轉換表時的內存布局：
-
-起始地址			結束地址			大小		用途
------------------------------------------------------------------------
-0000000000000000	0000ffffffffffff	 256TB		用戶空間
-ffff000000000000	ffffffffffffffff	 256TB		內核空間
-
-
-更詳細的內核虛擬內存布局，請參閱內核啓動信息。
-
-
-4KB 頁大小的轉換表查找：
-
-+--------+--------+--------+--------+--------+--------+--------+--------+
-|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
-+--------+--------+--------+--------+--------+--------+--------+--------+
- |                 |         |         |         |         |
- |                 |         |         |         |         v
- |                 |         |         |         |   [11:0]  頁內偏移
- |                 |         |         |         +-> [20:12] L3 索引
- |                 |         |         +-----------> [29:21] L2 索引
- |                 |         +---------------------> [38:30] L1 索引
- |                 +-------------------------------> [47:39] L0 索引
- +-------------------------------------------------> [63] TTBR0/1
-
-
-64KB 頁大小的轉換表查找：
-
-+--------+--------+--------+--------+--------+--------+--------+--------+
-|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
-+--------+--------+--------+--------+--------+--------+--------+--------+
- |                 |    |               |              |
- |                 |    |               |              v
- |                 |    |               |            [15:0]  頁內偏移
- |                 |    |               +----------> [28:16] L3 索引
- |                 |    +--------------------------> [41:29] L2 索引
- |                 +-------------------------------> [47:42] L1 索引
- +-------------------------------------------------> [63] TTBR0/1
-
-
-當使用 KVM 時, 管理程序（hypervisor）在 EL2 中通過相對內核虛擬地址的
-一個固定偏移來映射內核頁（內核虛擬地址的高 24 位設爲零）:
-
-起始地址			結束地址			大小		用途
------------------------------------------------------------------------
-0000004000000000	0000007fffffffff	 256GB		在 HYP 中映射的內核對象
-
diff --git a/Documentation/translations/zh_TW/arm64/perf.rst b/Documentation/translations/zh_TW/arm64/perf.rst
deleted file mode 100644
index f1ffd55dfe50a..0000000000000
--- a/Documentation/translations/zh_TW/arm64/perf.rst
+++ /dev/null
@@ -1,88 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: ../disclaimer-zh_TW.rst
-
-:Original: :ref:`Documentation/arm64/perf.rst <perf_index>`
-
-Translator: Bailu Lin <bailu.lin@vivo.com>
-            Hu Haowen <src.res@email.cn>
-
-=============
-Perf 事件屬性
-=============
-
-:作者: Andrew Murray <andrew.murray@arm.com>
-:日期: 2019-03-06
-
-exclude_user
-------------
-
-該屬性排除用戶空間。
-
-用戶空間始終運行在 EL0，因此該屬性將排除 EL0。
-
-
-exclude_kernel
---------------
-
-該屬性排除內核空間。
-
-打開 VHE 時內核運行在 EL2，不打開 VHE 時內核運行在 EL1。客戶機
-內核總是運行在 EL1。
-
-對於宿主機，該屬性排除 EL1 和 VHE 上的 EL2。
-
-對於客戶機，該屬性排除 EL1。請注意客戶機從來不會運行在 EL2。
-
-
-exclude_hv
-----------
-
-該屬性排除虛擬機監控器。
-
-對於 VHE 宿主機該屬性將被忽略，此時我們認爲宿主機內核是虛擬機監
-控器。
-
-對於 non-VHE 宿主機該屬性將排除 EL2，因爲虛擬機監控器運行在 EL2
-的任何代碼主要用於客戶機和宿主機的切換。
-
-對於客戶機該屬性無效。請注意客戶機從來不會運行在 EL2。
-
-
-exclude_host / exclude_guest
-----------------------------
-
-這些屬性分別排除了 KVM 宿主機和客戶機。
-
-KVM 宿主機可能運行在 EL0（用戶空間），EL1（non-VHE 內核）和
-EL2（VHE 內核 或 non-VHE 虛擬機監控器）。
-
-KVM 客戶機可能運行在 EL0（用戶空間）和 EL1（內核）。
-
-由於宿主機和客戶機之間重疊的異常級別，我們不能僅僅依靠 PMU 的硬體異
-常過濾機制-因此我們必須啓用/禁用對於客戶機進入和退出的計數。而這在
-VHE 和 non-VHE 系統上表現不同。
-
-對於 non-VHE 系統的 exclude_host 屬性排除 EL2 - 在進入和退出客戶
-機時，我們會根據 exclude_host 和 exclude_guest 屬性在適當的情況下
-禁用/啓用該事件。
-
-對於 VHE 系統的 exclude_guest 屬性排除 EL1，而對其中的 exclude_host
-屬性同時排除 EL0，EL2。在進入和退出客戶機時，我們會適當地根據
-exclude_host 和 exclude_guest 屬性包括/排除 EL0。
-
-以上聲明也適用於在 not-VHE 客戶機使用這些屬性時，但是請注意客戶機從
-來不會運行在 EL2。
-
-
-準確性
-------
-
-在 non-VHE 宿主機上，我們在 EL2 進入/退出宿主機/客戶機的切換時啓用/
-關閉計數器 -但是在啓用/禁用計數器和進入/退出客戶機之間存在一段延時。
-對於 exclude_host， 我們可以通過過濾 EL2 消除在客戶機進入/退出邊界
-上用於計數客戶機事件的宿主機事件計數器。但是當使用 !exclude_hv 時，
-在客戶機進入/退出有一個小的停電窗口無法捕獲到宿主機的事件。
-
-在 VHE 系統沒有停電窗口。
-
diff --git a/Documentation/translations/zh_TW/arm64/silicon-errata.txt b/Documentation/translations/zh_TW/arm64/silicon-errata.txt
deleted file mode 100644
index bf2077197504b..0000000000000
--- a/Documentation/translations/zh_TW/arm64/silicon-errata.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-SPDX-License-Identifier: GPL-2.0
-
-Chinese translated version of Documentation/arm64/silicon-errata.rst
-
-If you have any comment or update to the content, please contact the
-original document maintainer directly.  However, if you have a problem
-communicating in English you can also ask the Chinese maintainer for
-help.  Contact the Chinese maintainer if this translation is outdated
-or if there is a problem with the translation.
-
-M:	Will Deacon <will.deacon@arm.com>
-zh_CN:	Fu Wei <wefu@redhat.com>
-zh_TW:	Hu Haowen <src.res@email.cn>
-C:	1926e54f115725a9248d0c4c65c22acaf94de4c4
----------------------------------------------------------------------
-Documentation/arm64/silicon-errata.rst 的中文翻譯
-
-如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
-交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
-譯存在問題，請聯繫中文版維護者。
-
-英文版維護者： Will Deacon <will.deacon@arm.com>
-中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
-中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
-中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
-繁體中文版校譯者： 胡皓文  Hu Haowen <src.res@email.cn>
-本文翻譯提交時的 Git 檢出點爲： 1926e54f115725a9248d0c4c65c22acaf94de4c4
-
-以下爲正文
----------------------------------------------------------------------
-                晶片勘誤和軟體補救措施
-                ==================
-
-作者: Will Deacon <will.deacon@arm.com>
-日期: 2015年11月27日
-
-一個不幸的現實：硬體經常帶有一些所謂的「瑕疵（errata）」，導致其在
-某些特定情況下會違背構架定義的行爲。就基於 ARM 的硬體而言，這些瑕疵
-大體可分爲以下幾類：
-
-  A 類：無可行補救措施的嚴重缺陷。
-  B 類：有可接受的補救措施的重大或嚴重缺陷。
-  C 類：在正常操作中不會顯現的小瑕疵。
-
-更多資訊，請在 infocenter.arm.com （需註冊）中查閱「軟體開發者勘誤
-筆記」（「Software Developers Errata Notice」）文檔。
-
-對於 Linux 而言，B 類缺陷可能需要作業系統的某些特別處理。例如，避免
-一個特殊的代碼序列，或是以一種特定的方式配置處理器。在某種不太常見的
-情況下，爲將 A 類缺陷當作 C 類處理，可能需要用類似的手段。這些手段被
-統稱爲「軟體補救措施」，且僅在少數情況需要（例如，那些需要一個運行在
-非安全異常級的補救措施 *並且* 能被 Linux 觸發的情況）。
-
-對於尚在討論中的可能對未受瑕疵影響的系統產生干擾的軟體補救措施，有一個
-相應的內核配置（Kconfig）選項被加在 「內核特性（Kernel Features）」->
-「基於可選方法框架的 ARM 瑕疵補救措施（ARM errata workarounds via
-the alternatives framework）"。這些選項被默認開啓，若探測到受影響的CPU，
-補丁將在運行時被使用。至於對系統運行影響較小的補救措施，內核配置選項
-並不存在，且代碼以某種規避瑕疵的方式被構造（帶注釋爲宜）。
-
-這種做法對於在任意內核原始碼樹中準確地判斷出哪個瑕疵已被軟體方法所補救
-稍微有點麻煩，所以在 Linux 內核中此文件作爲軟體補救措施的註冊表，
-並將在新的軟體補救措施被提交和向後移植（backported）到穩定內核時被更新。
-
-| 實現者         | 受影響的組件    | 勘誤編號        | 內核配置                |
-+----------------+-----------------+-----------------+-------------------------+
-| ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319    |
-| ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319    |
-| ARM            | Cortex-A53      | #824069         | ARM64_ERRATUM_824069    |
-| ARM            | Cortex-A53      | #819472         | ARM64_ERRATUM_819472    |
-| ARM            | Cortex-A53      | #845719         | ARM64_ERRATUM_845719    |
-| ARM            | Cortex-A53      | #843419         | ARM64_ERRATUM_843419    |
-| ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075    |
-| ARM            | Cortex-A57      | #852523         | N/A                     |
-| ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220    |
-|                |                 |                 |                         |
-| Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375    |
-| Cavium         | ThunderX GICv3  | #23154          | CAVIUM_ERRATUM_23154    |
-
diff --git a/Documentation/translations/zh_TW/arm64/tagged-pointers.txt b/Documentation/translations/zh_TW/arm64/tagged-pointers.txt
deleted file mode 100644
index 87f88628401a3..0000000000000
--- a/Documentation/translations/zh_TW/arm64/tagged-pointers.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-SPDX-License-Identifier: GPL-2.0
-
-Chinese translated version of Documentation/arm64/tagged-pointers.rst
-
-If you have any comment or update to the content, please contact the
-original document maintainer directly.  However, if you have a problem
-communicating in English you can also ask the Chinese maintainer for
-help.  Contact the Chinese maintainer if this translation is outdated
-or if there is a problem with the translation.
-
-Maintainer: Will Deacon <will.deacon@arm.com>
-Chinese maintainer: Fu Wei <wefu@redhat.com>
-Traditional Chinese maintainer: Hu Haowen <src.res@email.cn>
----------------------------------------------------------------------
-Documentation/arm64/tagged-pointers.rst 的中文翻譯
-
-如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
-交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
-譯存在問題，請聯繫中文版維護者。
-
-英文版維護者： Will Deacon <will.deacon@arm.com>
-中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
-中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
-中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
-繁體中文版校譯者： 胡皓文  Hu Haowen <src.res@email.cn>
-
-以下爲正文
----------------------------------------------------------------------
-		Linux 在 AArch64 中帶標記的虛擬地址
-		=================================
-
-作者: Will Deacon <will.deacon@arm.com>
-日期: 2013 年 06 月 12 日
-
-本文檔簡述了在 AArch64 地址轉換系統中提供的帶標記的虛擬地址及其在
-AArch64 Linux 中的潛在用途。
-
-內核提供的地址轉換表配置使通過 TTBR0 完成的虛擬地址轉換（即用戶空間
-映射），其虛擬地址的最高 8 位（63:56）會被轉換硬體所忽略。這種機制
-讓這些位可供應用程式自由使用，其注意事項如下：
-
-	(1) 內核要求所有傳遞到 EL1 的用戶空間地址帶有 0x00 標記。
-	    這意味著任何攜帶用戶空間虛擬地址的系統調用（syscall）
-	    參數 *必須* 在陷入內核前使它們的最高字節被清零。
-
-	(2) 非零標記在傳遞信號時不被保存。這意味著在應用程式中利用了
-	    標記的信號處理函數無法依賴 siginfo_t 的用戶空間虛擬
-	    地址所攜帶的包含其內部域信息的標記。此規則的一個例外是
-	    當信號是在調試觀察點的異常處理程序中產生的，此時標記的
-	    信息將被保存。
-
-	(3) 當使用帶標記的指針時需特別留心，因爲僅對兩個虛擬地址
-	    的高字節，C 編譯器很可能無法判斷它們是不同的。
-
-此構架會阻止對帶標記的 PC 指針的利用，因此在異常返回時，其高字節
-將被設置成一個爲 「55」 的擴展符。
-
diff --git a/Documentation/translations/zh_TW/gpio.txt b/Documentation/translations/zh_TW/gpio.txt
index 62e560ffe6283..b93788a2628b6 100644
--- a/Documentation/translations/zh_TW/gpio.txt
+++ b/Documentation/translations/zh_TW/gpio.txt
@@ -161,8 +161,7 @@ get/set(獲取/設置)函數調用沒法返回錯誤,且有可能是配置錯誤
 大多數 GPIO 控制器可以通過內存讀/寫指令來訪問。這些指令不會休眠,可以
 安全地在硬(非線程)中斷例程和類似的上下文中完成。
 
-對於那些用 gpio_cansleep()測試總是返回失敗的 GPIO(見下文)，使用
-以下的函數訪問:
+對於那些 GPIO，使用以下的函數訪問:
 
 	/* GPIO 輸入:返回零或非零 */
 	int gpio_get_value(unsigned gpio);
@@ -193,11 +192,6 @@ GPIO值是布爾值，零表示低電平，非零表示高電平。當讀取一
 GPIO 值的命令需要等待其信息排到隊首才發送命令，再獲得其反饋。期間需要
 休眠，這不能在 IRQ 例程(中斷上下文)中執行。
 
-支持此類 GPIO 的平台通過以下函數返回非零值來區分出這種 GPIO。(此函數需要
-一個之前通過 gpio_request 分配到的有效 GPIO 編號):
-
-	int gpio_cansleep(unsigned gpio);
-
 爲了訪問這種 GPIO,內核定義了一套不同的函數:
 
 	/* GPIO 輸入:返回零或非零 ,可能會休眠 */
@@ -206,7 +200,6 @@ GPIO 值的命令需要等待其信息排到隊首才發送命令，再獲得其
 	/* GPIO 輸出,可能會休眠 */
 	void gpio_set_value_cansleep(unsigned gpio, int value);
 
-
 訪問這樣的 GPIO 需要一個允許休眠的上下文，例如線程 IRQ 處理例程，並用以上的
 訪問函數替換那些沒有 cansleep()後綴的自旋鎖安全訪問函數。
 
@@ -300,11 +293,6 @@ gpio_request()前將這類細節配置好，例如使用 pinctrl 子系統的映
 
 	* GPIOF_INIT_LOW	- 在作爲輸出時,初始值爲低電平
 	* GPIOF_INIT_HIGH	- 在作爲輸出時,初始值爲高電平
-	* GPIOF_OPEN_DRAIN	- gpio引腳爲開漏信號
-	* GPIOF_OPEN_SOURCE	- gpio引腳爲源極開路信號
-
-	* GPIOF_EXPORT_DIR_FIXED	- 將 gpio 導出到 sysfs，並保持方向
-	* GPIOF_EXPORT_DIR_CHANGEABLE	- 同樣是導出, 但允許改變方向
 
 因爲 GPIOF_INIT_* 僅有在配置爲輸出的時候才存在,所以有效的組合爲:
 
@@ -312,18 +300,6 @@ gpio_request()前將這類細節配置好，例如使用 pinctrl 子系統的映
 	* GPIOF_OUT_INIT_LOW	- 配置爲輸出,並初始化爲低電平
 	* GPIOF_OUT_INIT_HIGH	- 配置爲輸出,並初始化爲高電平
 
-當設置 flag 爲 GPIOF_OPEN_DRAIN 時，則假設引腳是開漏信號。這樣的引腳
-將不會在輸出模式下置1。這樣的引腳需要連接上拉電阻。通過使能這個標誌，gpio庫
-將會在被要求輸出模式下置1時將引腳變爲輸入狀態來使引腳置高。引腳在輸出模式下
-通過置0使其輸出低電平。
-
-當設置 flag 爲 GPIOF_OPEN_SOURCE 時，則假設引腳爲源極開路信號。這樣的引腳
-將不會在輸出模式下置0。這樣的引腳需要連接下拉電阻。通過使能這個標誌，gpio庫
-將會在被要求輸出模式下置0時將引腳變爲輸入狀態來使引腳置低。引腳在輸出模式下
-通過置1使其輸出高電平。
-
-將來這些標誌可能擴展到支持更多的屬性。
-
 更進一步,爲了更簡單地聲明/釋放多個 GPIO,'struct gpio'被引進來封裝所有
 這三個領域:
 
@@ -466,8 +442,8 @@ GPIO 實現者的框架 (可選)
 -------
 爲了支持這個框架，一個平台的 Kconfig 文件將會 "select"(選擇)
 ARCH_REQUIRE_GPIOLIB 或 ARCH_WANT_OPTIONAL_GPIOLIB，並讓它的
-<asm/gpio.h> 包含 <asm-generic/gpio.h>，同時定義三個方法:
-gpio_get_value()、gpio_set_value()和 gpio_cansleep()。
+<asm/gpio.h> 包含 <asm-generic/gpio.h>，同時定義二個方法:
+gpio_get_value()、gpio_set_value()。
 
 它也應提供一個 ARCH_NR_GPIOS 的定義值，這樣可以更好地反映該平台 GPIO
 的實際數量,節省靜態表的空間。(這個定義值應該包含片上系統內建 GPIO 和
@@ -485,7 +461,6 @@ ARCH_WANT_OPTIONAL_GPIOLIB 意味著 gpiolib 核心默認關閉,且用戶可以
 
   #define gpio_get_value	__gpio_get_value
   #define gpio_set_value	__gpio_set_value
-  #define gpio_cansleep		__gpio_cansleep
 
 這些定義可以用更理想的實現方法替代，那就是使用經過邏輯優化的內聯函數來訪問
 基於特定片上系統的 GPIO。例如,若引用的 GPIO (寄存器位偏移)是常量「12」，
diff --git a/Documentation/translations/zh_TW/index.rst b/Documentation/translations/zh_TW/index.rst
index e97d7d5787515..e7c83868e7804 100644
--- a/Documentation/translations/zh_TW/index.rst
+++ b/Documentation/translations/zh_TW/index.rst
@@ -150,7 +150,7 @@ TODOList:
 .. toctree::
    :maxdepth: 2
 
-   arm64/index
+   arch/arm64/index
 
 TODOList:
 
diff --git a/Documentation/translations/zh_TW/process/2.Process.rst b/Documentation/translations/zh_TW/process/2.Process.rst
index b01cdd3a39aea..9d465df1f6c36 100644
--- a/Documentation/translations/zh_TW/process/2.Process.rst
+++ b/Documentation/translations/zh_TW/process/2.Process.rst
@@ -361,7 +361,7 @@ Andrew Morton 爲有抱負的內核開發人員提供了如下建議
 	機器上始終完美運行」。通常的方法是和其他人一起解決問題（這可能需
 	要堅持！），但就是如此——這是內核開發的一部分。
 
-(http://lwn.net/articles/283982/)
+(http://lwn.net/Articles/283982/)
 
 在沒有明顯問題需要解決的情況下，通常建議開發人員查看當前的回歸和開放缺陷
 列表。從來都不缺少需要解決的問題；通過解決這些問題，開發人員將從該過程獲得
diff --git a/Documentation/translations/zh_TW/process/3.Early-stage.rst b/Documentation/translations/zh_TW/process/3.Early-stage.rst
index ab2a45fd65a42..076873ca09050 100644
--- a/Documentation/translations/zh_TW/process/3.Early-stage.rst
+++ b/Documentation/translations/zh_TW/process/3.Early-stage.rst
@@ -47,7 +47,7 @@
 	試圖向這些人傳達用戶需求是浪費時間。他們太「聰明」了，根本聽不到少數
 	人的話。
 
-（http://lwn.net/articles/131776/）
+（http://lwn.net/Articles/131776/）
 
 實際情況卻是不同的；與特定模塊相比，內核開發人員更關心系統穩定性、長期維護
 以及找到問題的正確解決方案。這個故事的寓意是把重點放在問題上——而不是具體的
diff --git a/Documentation/translations/zh_TW/process/4.Coding.rst b/Documentation/translations/zh_TW/process/4.Coding.rst
index ccc3946227a04..7fc0344ed16bb 100644
--- a/Documentation/translations/zh_TW/process/4.Coding.rst
+++ b/Documentation/translations/zh_TW/process/4.Coding.rst
@@ -152,7 +152,7 @@ Linus對這個問題給出了最佳答案:
 	所以我們不會通過引入新問題來修復錯誤。這種方式是靠不住的，沒人知道
 	是否真的有進展。是前進兩步、後退一步，還是前進一步、後退兩步？
 
-（http://lwn.net/articles/243460/）
+（http://lwn.net/Articles/243460/）
 
 特別不受歡迎的一種回歸類型是用戶空間ABI的任何變化。一旦接口被導出到用戶空間，
 就必須無限期地支持它。這一事實使得用戶空間接口的創建特別具有挑戰性：因爲它們
diff --git a/Documentation/translations/zh_TW/process/7.AdvancedTopics.rst b/Documentation/translations/zh_TW/process/7.AdvancedTopics.rst
index 3de093d0f1708..4fbc104a37ca1 100644
--- a/Documentation/translations/zh_TW/process/7.AdvancedTopics.rst
+++ b/Documentation/translations/zh_TW/process/7.AdvancedTopics.rst
@@ -101,7 +101,7 @@ Git提供了一些強大的工具，可以讓您重寫開發歷史。一個不
    你可以給我發補丁，但當我從你那裡拉取一個Git補丁時，我需要知道你清楚
    自己在做什麼，我需要能夠相信事情而 *無需* 手動檢查每個單獨的更改。
 
-（http://lwn.net/articles/224135/）。
+（http://lwn.net/Articles/224135/）。
 
 爲了避免這種情況，請確保給定分支中的所有補丁都與相關主題緊密相關；「驅動程序
 修復」分支不應更改核心內存管理代碼。而且，最重要的是，不要使用Git樹來繞過
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index 4f7b23faebb98..4ea5b837399ad 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -180,6 +180,7 @@ Code  Seq#    Include File                                           Comments
 'P'   00-0F  drivers/usb/class/usblp.c                               conflict!
 'P'   01-09  drivers/misc/pci_endpoint_test.c                        conflict!
 'P'   00-0F  xen/privcmd.h                                           conflict!
+'P'   00-05  linux/tps6594_pfsm.h                                    conflict!
 'Q'   all    linux/soundcard.h
 'R'   00-1F  linux/random.h                                          conflict!
 'R'   01     linux/rfkill.h                                          conflict!
diff --git a/Documentation/userspace-api/media/frontend.h.rst.exceptions b/Documentation/userspace-api/media/frontend.h.rst.exceptions
index 8b73fee11a797..dcaf5740de7ec 100644
--- a/Documentation/userspace-api/media/frontend.h.rst.exceptions
+++ b/Documentation/userspace-api/media/frontend.h.rst.exceptions
@@ -142,6 +142,10 @@ ignore symbol FEC_26_45
 ignore symbol FEC_28_45
 ignore symbol FEC_32_45
 ignore symbol FEC_77_90
+ignore symbol FEC_11_45
+ignore symbol FEC_4_15
+ignore symbol FEC_14_45
+ignore symbol FEC_7_15
 
 ignore symbol TRANSMISSION_MODE_AUTO
 ignore symbol TRANSMISSION_MODE_1K
diff --git a/Documentation/userspace-api/media/v4l/biblio.rst b/Documentation/userspace-api/media/v4l/biblio.rst
index 9cd18c153d195..72aef1759b60b 100644
--- a/Documentation/userspace-api/media/v4l/biblio.rst
+++ b/Documentation/userspace-api/media/v4l/biblio.rst
@@ -427,3 +427,12 @@ VP9
 :title:     VP9 Bitstream & Decoding Process Specification
 
 :author:    Adrian Grange (Google), Peter de Rivaz (Argon Design), Jonathan Hunt (Argon Design)
+
+.. _av1:
+
+AV1
+===
+
+:title:     AV1 Bitstream & Decoding Process Specification
+
+:author:    Peter de Rivaz, Argon Design Ltd, Jack Haughton, Argon Design Ltd
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
index daa4f40869f8f..cdc515c604683 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
@@ -506,6 +506,8 @@ enum v4l2_scene_mode -
     value down. A value of zero stops the motion if one is in progress
     and has no effect otherwise.
 
+.. _v4l2-camera-sensor-orientation:
+
 ``V4L2_CID_CAMERA_ORIENTATION (menu)``
     This read-only control describes the camera orientation by reporting its
     mounting position on the device where the camera is installed. The control
@@ -536,6 +538,7 @@ enum v4l2_scene_mode -
       - The camera is not directly attached to the device and is freely movable.
 
 
+.. _v4l2-camera-sensor-rotation:
 
 ``V4L2_CID_CAMERA_SENSOR_ROTATION (integer)``
     This read-only control describes the rotation correction in degrees in the
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
index 3d8411acd5b8c..81e60f4002c8f 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
@@ -1890,11 +1890,11 @@ params syntax' of the :ref:`vp9` specification for more details.
     * - __u8
       - ``tree_probs[7]``
       - Specifies the probability values to be used when decoding a Segment-ID.
-        See '5.15. Segmentation map' section of :ref:`vp9` for more details.
+        See '5.15 Segmentation map' section of :ref:`vp9` for more details.
     * - __u8
       - ``pred_probs[3]``
       - Specifies the probability values to be used when decoding a
-        Predicted-Segment-ID. See '6.4.14. Get segment id syntax'
+        Predicted-Segment-ID. See '6.4.14 Get segment id syntax'
         section of :ref:`vp9` for more details.
     * - __u8
       - ``flags``
@@ -2923,6 +2923,13 @@ This structure contains all loop filter related parameters. See sections
       - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - PocLtCurr as described in section 8.3.2 "Decoding process for reference
         picture set": provides the index of the long term references in DPB array.
+    * - __u8
+      - ``num_delta_pocs_of_ref_rps_idx``
+      - When the short_term_ref_pic_set_sps_flag in the slice header is equal to 0,
+        it is the same as the derived value NumDeltaPocs[RefRpsIdx]. It can be used to parse
+        the RPS data in slice headers instead of skipping it with @short_term_ref_pic_set_size.
+        When the value of short_term_ref_pic_set_sps_flag in the slice header is
+        equal to 1, num_delta_pocs_of_ref_rps_idx shall be set to 0.
     * - struct :c:type:`v4l2_hevc_dpb_entry`
       - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - The decoded picture buffer, for meta-data about reference frames.
@@ -2950,3 +2957,1208 @@ This structure contains all loop filter related parameters. See sections
     * - ``V4L2_HEVC_DECODE_PARAM_FLAG_NO_OUTPUT_OF_PRIOR``
       - 0x00000004
       -
+
+.. _v4l2-codec-stateless-av1:
+
+``V4L2_CID_STATELESS_AV1_SEQUENCE (struct)``
+    Represents an AV1 Sequence OBU (Open Bitstream Unit). See section 5.5
+    "Sequence header OBU syntax" in :ref:`av1` for more details.
+
+.. c:type:: v4l2_ctrl_av1_sequence
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}|
+
+.. flat-table:: struct v4l2_ctrl_av1_sequence
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``flags``
+      - See :ref:`AV1 Sequence Flags <av1_sequence_flags>`.
+    * - __u8
+      - ``seq_profile``
+      - Specifies the features that can be used in the coded video sequence.
+    * - __u8
+      - ``order_hint_bits``
+      - Specifies the number of bits used for the order_hint field at each frame.
+    * - __u8
+      - ``bit_depth``
+      - the bit depth to use for the sequence as described in section 5.5.2
+        "Color config syntax" in :ref:`av1` for more details.
+    * - __u8
+      - ``reserved``
+      - Applications and drivers must set this to zero.
+    * - __u16
+      - ``max_frame_width_minus_1``
+      - specifies the maximum frame width minus 1 for the frames represented by
+        this sequence header.
+
+.. _av1_sequence_flags:
+
+``AV1 Sequence Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_SEQUENCE_FLAG_STILL_PICTURE``
+      - 0x00000001
+      - If set, specifies that the coded video sequence contains only one coded
+        frame. If not set, specifies that the coded video sequence contains one
+        or more coded frames.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_USE_128X128_SUPERBLOCK``
+      - 0x00000002
+      - If set, indicates that superblocks contain 128x128 luma samples.
+        When equal to 0, it indicates that superblocks contain 64x64 luma
+        samples. The number of contained chroma samples depends on
+        subsampling_x and subsampling_y.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_FILTER_INTRA``
+      - 0x00000004
+      - If set, specifies that the use_filter_intra syntax element may be
+        present. If not set, specifies that the use_filter_intra syntax element
+        will not be present.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTRA_EDGE_FILTER``
+      - 0x00000008
+      - Specifies whether the intra edge filtering process should be enabled.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTERINTRA_COMPOUND``
+      - 0x00000010
+      - If set, specifies that the mode info for inter blocks may contain the
+        syntax element interintra. If not set, specifies that the syntax element
+        interintra will not be present.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_MASKED_COMPOUND``
+      - 0x00000020
+      - If set, specifies that the mode info for inter blocks may contain the
+        syntax element compound_type. If not set, specifies that the syntax
+        element compound_type will not be present.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_WARPED_MOTION``
+      - 0x00000040
+      - If set, indicates that the allow_warped_motion syntax element may be
+        present. If not set, indicates that the allow_warped_motion syntax
+        element will not be present.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_DUAL_FILTER``
+      - 0x00000080
+      - If set, indicates that the inter prediction filter type may be specified
+        independently in the horizontal and vertical directions. If the flag is
+        equal to 0, only one filter type may be specified, which is then used in
+        both directions.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_ORDER_HINT``
+      - 0x00000100
+      - If set, indicates that tools based on the values of order hints may be
+        used. If not set, indicates that tools based on order hints are
+        disabled.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_JNT_COMP``
+      - 0x00000200
+      - If set, indicates that the distance weights process may be used for
+        inter prediction.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_REF_FRAME_MVS``
+      - 0x00000400
+      - If set, indicates that the use_ref_frame_mvs syntax element may be
+        present. If not set, indicates that the use_ref_frame_mvs syntax element
+        will not be present.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_SUPERRES``
+      - 0x00000800
+      - If set, specifies that the use_superres syntax element will be present
+        in the uncompressed header. If not set, specifies that the use_superres
+        syntax element will not be present (instead use_superres will be set to
+        0 in the uncompressed header without being read).
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF``
+      - 0x00001000
+      - If set, specifies that cdef filtering may be enabled. If not set,
+        specifies that cdef filtering is disabled.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_RESTORATION``
+      - 0x00002000
+      - If set, specifies that loop restoration filtering may be enabled. If not
+        set, specifies that loop restoration filtering is disabled.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_MONO_CHROME``
+      - 0x00004000
+      - If set, indicates that the video does not contain U and V color planes.
+        If not set, indicates that the video contains Y, U, and V color planes.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_COLOR_RANGE``
+      - 0x00008000
+      - If set, signals full swing representation, i.e. "Full Range
+        Quantization". If not set, signals studio swing representation, i.e.
+        "Limited Range Quantization".
+    * - ``V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_X``
+      - 0x00010000
+      - Specify the chroma subsampling format.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_Y``
+      - 0x00020000
+      - Specify the chroma subsampling format.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_FILM_GRAIN_PARAMS_PRESENT``
+      - 0x00040000
+      - Specifies whether film grain parameters are present in the coded video
+        sequence.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_SEPARATE_UV_DELTA_Q``
+      - 0x00080000
+      - If set, indicates that the U and V planes may have separate delta
+        quantizer values. If not set, indicates that the U and V planes will share
+        the same delta quantizer value.
+
+``V4L2_CID_STATELESS_AV1_TILE_GROUP_ENTRY (struct)``
+    Represents a single AV1 tile inside an AV1 Tile Group. Note that MiRowStart,
+    MiRowEnd, MiColStart and MiColEnd can be retrieved from struct
+    v4l2_av1_tile_info in struct v4l2_ctrl_av1_frame using tile_row and
+    tile_col. See section 6.10.1 "General tile group OBU semantics" in
+    :ref:`av1` for more details.
+
+.. c:type:: v4l2_ctrl_av1_tile_group_entry
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}|
+
+.. flat-table:: struct v4l2_ctrl_av1_tile_group_entry
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``tile_offset``
+      - Offset from the OBU data, i.e. where the coded tile data actually starts.
+    * - __u32
+      - ``tile_size``
+      - Specifies the size in bytes of the coded tile. Equivalent to "TileSize"
+        in :ref:`av1`.
+    * - __u32
+      - ``tile_row``
+      - Specifies the row of the current tile. Equivalent to "TileRow" in
+        :ref:`av1`.
+    * - __u32
+      - ``tile_col``
+      - Specifies the column of the current tile. Equivalent to "TileColumn" in
+        :ref:`av1`.
+
+.. c:type:: v4l2_av1_warp_model
+
+	AV1 Warp Model as described in section 3 "Symbols and abbreviated terms" of
+	:ref:`av1`.
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_WARP_MODEL_IDENTITY``
+      - 0
+      - Warp model is just an identity transform.
+    * - ``V4L2_AV1_WARP_MODEL_TRANSLATION``
+      - 1
+      - Warp model is a pure translation.
+    * - ``V4L2_AV1_WARP_MODEL_ROTZOOM``
+      - 2
+      - Warp model is a rotation + symmetric zoom + translation.
+    * - ``V4L2_AV1_WARP_MODEL_AFFINE``
+      - 3
+      - Warp model is a general affine transform.
+
+.. c:type:: v4l2_av1_reference_frame
+
+AV1 Reference Frames as described in section 6.10.24 "Ref frames semantics"
+of :ref:`av1`.
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_REF_INTRA_FRAME``
+      - 0
+      - Intra Frame Reference.
+    * - ``V4L2_AV1_REF_LAST_FRAME``
+      - 1
+      - Last Frame Reference.
+    * - ``V4L2_AV1_REF_LAST2_FRAME``
+      - 2
+      - Last2 Frame Reference.
+    * - ``V4L2_AV1_REF_LAST3_FRAME``
+      - 3
+      - Last3 Frame Reference.
+    * - ``V4L2_AV1_REF_GOLDEN_FRAME``
+      - 4
+      - Golden Frame Reference.
+    * - ``V4L2_AV1_REF_BWDREF_FRAME``
+      - 5
+      - BWD Frame Reference.
+    * - ``V4L2_AV1_REF_ALTREF2_FRAME``
+      - 6
+      - ALTREF2 Frame Reference.
+    * - ``V4L2_AV1_REF_ALTREF_FRAME``
+      - 7
+      - ALTREF Frame Reference.
+
+.. c:type:: v4l2_av1_global_motion
+
+AV1 Global Motion parameters as described in section 6.8.17
+"Global motion params semantics" of :ref:`av1`.
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}|
+
+.. flat-table:: struct v4l2_av1_global_motion
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``flags[V4L2_AV1_TOTAL_REFS_PER_FRAME]``
+      - A bitfield containing the flags per reference frame. See
+        :ref:`AV1 Global Motion Flags <av1_global_motion_flags>` for more
+        details.
+    * - enum :c:type:`v4l2_av1_warp_model`
+      - ``type[V4L2_AV1_TOTAL_REFS_PER_FRAME]``
+      - The type of global motion transform used.
+    * - __s32
+      - ``params[V4L2_AV1_TOTAL_REFS_PER_FRAME][6]``
+      - This field has the same meaning as "gm_params" in :ref:`av1`.
+    * - __u8
+      - ``invalid``
+      - Bitfield indicating whether the global motion params are invalid for a
+        given reference frame. See section 7.11.3.6 Setup shear process and the
+        variable "warpValid". Use V4L2_AV1_GLOBAL_MOTION_IS_INVALID(ref) to
+        create a suitable mask.
+    * - __u8
+      - ``reserved[3]``
+      - Applications and drivers must set this to zero.
+
+.. _av1_global_motion_flags:
+
+``AV1 Global Motion Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_GLOBAL_MOTION_FLAG_IS_GLOBAL``
+      - 0x00000001
+      - Specifies whether global motion parameters are present for a particular
+        reference frame.
+    * - ``V4L2_AV1_GLOBAL_MOTION_FLAG_IS_ROT_ZOOM``
+      - 0x00000002
+      - Specifies whether a particular reference frame uses rotation and zoom
+        global motion.
+    * - ``V4L2_AV1_GLOBAL_MOTION_FLAG_IS_TRANSLATION``
+      - 0x00000004
+      - Specifies whether a particular reference frame uses translation global
+        motion
+
+.. c:type:: v4l2_av1_frame_restoration_type
+
+AV1 Frame Restoration Type.
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_FRAME_RESTORE_NONE``
+      - 0
+      - No filtering is applied.
+    * - ``V4L2_AV1_FRAME_RESTORE_WIENER``
+      - 1
+      - Wiener filter process is invoked.
+    * - ``V4L2_AV1_FRAME_RESTORE_SGRPROJ``
+      - 2
+      - Self guided filter process is invoked.
+    * - ``V4L2_AV1_FRAME_RESTORE_SWITCHABLE``
+      - 3
+      - Restoration filter is swichtable.
+
+.. c:type:: v4l2_av1_loop_restoration
+
+AV1 Loop Restauration as described in section 6.10.15 "Loop restoration params
+semantics" of :ref:`av1`.
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}|
+
+.. flat-table:: struct v4l2_av1_loop_restoration
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``flags``
+      - See :ref:`AV1 Loop Restoration Flags <av1_loop_restoration_flags>`.
+    * - __u8
+      - ``lr_unit_shift``
+      - Specifies if the luma restoration size should be halved.
+    * - __u8
+      - ``lr_uv_shift``
+      - Specifies if the chroma size should be half the luma size.
+    * - __u8
+      - ``reserved``
+      - Applications and drivers must set this to zero.
+    * - :c:type:`v4l2_av1_frame_restoration_type`
+      - ``frame_restoration_type[V4L2_AV1_NUM_PLANES_MAX]``
+      - Specifies the type of restoration used for each plane.
+    * - __u8
+      - ``loop_restoration_size[V4L2_AV1_MAX_NUM_PLANES]``
+      - Specifies the size of loop restoration units in units of samples in the
+        current plane.
+
+.. _av1_loop_restoration_flags:
+
+``AV1 Loop Restoration Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_LOOP_RESTORATION_FLAG_USES_LR``
+      - 0x00000001
+      - Retains the same meaning as UsesLr in :ref:`av1`.
+    * - ``V4L2_AV1_LOOP_RESTORATION_FLAG_USES_CHROMA_LR``
+      - 0x00000002
+      - Retains the same meaning as UsesChromaLr in :ref:`av1`.
+
+.. c:type:: v4l2_av1_cdef
+
+AV1 CDEF params semantics as described in section 6.10.14 "CDEF params
+semantics" of :ref:`av1`.
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}|
+
+.. flat-table:: struct v4l2_av1_cdef
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``damping_minus_3``
+      - Controls the amount of damping in the deringing filter.
+    * - __u8
+      - ``bits``
+      - Specifies the number of bits needed to specify which CDEF filter to
+        apply.
+    * - __u8
+      - ``y_pri_strength[V4L2_AV1_CDEF_MAX]``
+      -  Specifies the strength of the primary filter.
+    * - __u8
+      - ``y_sec_strength[V4L2_AV1_CDEF_MAX]``
+      -  Specifies the strength of the secondary filter.
+    * - __u8
+      - ``uv_pri_strength[V4L2_AV1_CDEF_MAX]``
+      -  Specifies the strength of the primary filter.
+    * - __u8
+      - ``uv_secondary_strength[V4L2_AV1_CDEF_MAX]``
+      -  Specifies the strength of the secondary filter.
+
+.. c:type:: v4l2_av1_segment_feature
+
+AV1 segment features as described in section 3 "Symbols and abbreviated terms"
+of :ref:`av1`.
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_SEG_LVL_ALT_Q``
+      - 0
+      - Index for quantizer segment feature.
+    * - ``V4L2_AV1_SEG_LVL_ALT_LF_Y_V``
+      - 1
+      - Index for vertical luma loop filter segment feature.
+    * - ``V4L2_AV1_SEG_LVL_REF_FRAME``
+      - 5
+      - Index for reference frame segment feature.
+    * - ``V4L2_AV1_SEG_LVL_REF_SKIP``
+      - 6
+      - Index for skip segment feature.
+    * - ``V4L2_AV1_SEG_LVL_REF_GLOBALMV``
+      - 7
+      - Index for global mv feature.
+    * - ``V4L2_AV1_SEG_LVL_MAX``
+      - 8
+      - Number of segment features.
+
+.. c:type:: v4l2_av1_segmentation
+
+AV1 Segmentation params as defined in section 6.8.13 "Segmentation params
+semantics" of :ref:`av1`.
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}|
+
+.. flat-table:: struct v4l2_av1_segmentation
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``flags``
+      - See :ref:`AV1 Segmentation Flags <av1_segmentation_flags>`
+    * - __u8
+      - ``last_active_seg_id``
+      -  Indicates the highest numbered segment id that has some
+         enabled feature. This is used when decoding the segment id to only decode
+         choices corresponding to used segments.
+    * - __u8
+      - ``feature_enabled[V4L2_AV1_MAX_SEGMENTS]``
+      - Bitmask defining which features are enabled in each segment. Use
+        V4L2_AV1_SEGMENT_FEATURE_ENABLED to build a suitable mask.
+    * - __u16
+      - `feature_data[V4L2_AV1_MAX_SEGMENTS][V4L2_AV1_SEG_LVL_MAX]``
+      -  Data attached to each feature. Data entry is only valid if the feature
+         is enabled.
+
+.. _av1_segmentation_flags:
+
+``AV1 Segmentation Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_SEGMENTATION_FLAG_ENABLED``
+      - 0x00000001
+      - If set, indicates that this frame makes use of the segmentation tool. If
+        not set, indicates that the frame does not use segmentation.
+    * - ``V4L2_AV1_SEGMENTATION_FLAG_UPDATE_MAP``
+      - 0x00000002
+      - If set, indicates that the segmentation map are updated during the
+        decoding of this frame. If not set, indicates that the segmentation map
+        from the previous frame is used.
+    * - ``V4L2_AV1_SEGMENTATION_FLAG_TEMPORAL_UPDATE``
+      - 0x00000004
+      - If set, indicates that the updates to the segmentation map are coded
+        relative to the existing segmentation map. If not set, indicates that
+        the new segmentation map is coded without reference to the existing
+        segmentation map.
+    * - ``V4L2_AV1_SEGMENTATION_FLAG_UPDATE_DATA``
+      - 0x00000008
+      - If set, indicates that the updates to the segmentation map are coded
+        relative to the existing segmentation map. If not set, indicates that
+        the new segmentation map is coded without reference to the existing
+        segmentation map.
+    * - ``V4L2_AV1_SEGMENTATION_FLAG_SEG_ID_PRE_SKIP``
+      - 0x00000010
+      - If set, indicates that the segment id will be read before the skip
+        syntax element. If not set, indicates that the skip syntax element will
+        be read first.
+
+.. c:type:: v4l2_av1_loop_filter
+
+AV1 Loop filter params as defined in section 6.8.10 "Loop filter semantics" of
+:ref:`av1`.
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}|
+
+.. flat-table:: struct v4l2_av1_global_motion
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``flags``
+      - See
+        :ref:`AV1 Loop Filter flags <av1_loop_filter_flags>` for more details.
+    * - __u8
+      - ``level[4]``
+      - An array containing loop filter strength values. Different loop
+        filter strength values from the array are used depending on the image
+        plane being filtered, and the edge direction (vertical or horizontal)
+        being filtered.
+    * - __u8
+      - ``sharpness``
+      - indicates the sharpness level. The loop_filter_level and
+        loop_filter_sharpness together determine when a block edge is filtered,
+        and by how much the filtering can change the sample values. The loop
+        filter process is described in section 7.14 of :ref:`av1`.
+    * - __u8
+      - ``ref_deltas[V4L2_AV1_TOTAL_REFS_PER_FRAME]``
+      - contains the adjustment needed for the filter level based on the
+        chosen reference frame. If this syntax element is not present, it
+        maintains its previous value.
+    * - __u8
+      - ``mode_deltas[2]``
+      - contains the adjustment needed for the filter level based on
+        the chosen mode. If this syntax element is not present, it maintains its
+        previous value.
+    * - __u8
+      - ``delta_lf_res``
+      - specifies the left shift which should be applied to decoded loop filter
+        delta values.
+
+.. _av1_loop_filter_flags:
+
+``AV1 Loop Filter Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_LOOP_FILTER_FLAG_DELTA_ENABLED``
+      - 0x00000001
+      - If set, means that the filter level depends on the mode and reference
+        frame used to predict a block. If not set, means that the filter level
+        does not depend on the mode and reference frame.
+    * - ``V4L2_AV1_LOOP_FILTER_FLAG_DELTA_UPDATE``
+      - 0x00000002
+      - If set, means that additional syntax elements are present that specify
+        which mode and reference frame deltas are to be updated. If not set,
+        means that these syntax elements are not present.
+    * - ``V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_PRESENT``
+      - 0x00000004
+      - Specifies whether loop filter delta values are present
+    * - ``V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_MULTI``
+      - 0x00000008
+      - A value equal to 1 specifies that separate loop filter
+        deltas are sent for horizontal luma edges, vertical luma edges,
+        the U edges, and the V edges. A value of delta_lf_multi equal to 0
+        specifies that the same loop filter delta is used for all edges.
+
+.. c:type:: v4l2_av1_quantization
+
+AV1 Quantization params as defined in section 6.8.11 "Quantization params
+semantics" of :ref:`av1`.
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}|
+
+.. flat-table:: struct v4l2_av1_quantization
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``flags``
+      - See
+        :ref:`AV1 Loop Filter flags <av1_quantization_flags>` for more details.
+    * - __u8
+      - ``base_q_idx``
+      - Indicates the base frame qindex. This is used for Y AC coefficients and
+        as the base value for the other quantizers.
+    * - __u8
+      - ``delta_q_y_dc``
+      - Indicates the Y DC quantizer relative to base_q_idx.
+    * - __u8
+      - ``delta_q_u_dc``
+      - Indicates the U DC quantizer relative to base_q_idx.
+    * - __u8
+      - ``delta_q_u_ac``
+      - Indicates the U AC quantizer relative to base_q_idx.
+    * - __u8
+      - ``delta_q_v_dc``
+      - Indicates the V DC quantizer relative to base_q_idx.
+    * - __u8
+      - ``delta_q_v_ac``
+      - Indicates the V AC quantizer relative to base_q_idx.
+    * - __u8
+      - ``qm_y``
+      - Specifies the level in the quantizer matrix that should be used for
+        luma plane decoding.
+    * - __u8
+      - ``qm_u``
+      - Specifies the level in the quantizer matrix that should be used for
+        chroma U plane decoding.
+    * - __u8
+      - ``qm_v``
+      - Specifies the level in the quantizer matrix that should be used for
+        chroma V plane decoding.
+    * - __u8
+      - ``delta_q_res``
+      - Specifies the left shift which should be applied to decoded quantizer
+        index delta values.
+
+.. _av1_quantization_flags:
+
+``AV1 Quantization Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_QUANTIZATION_FLAG_DIFF_UV_DELTA``
+      - 0x00000001
+      - If set, indicates that the U and V delta quantizer values are coded
+        separately. If not set, indicates that the U and V delta quantizer
+        values share a common value.
+    * - ``V4L2_AV1_QUANTIZATION_FLAG_USING_QMATRIX``
+      - 0x00000002
+      - If set, specifies that the quantizer matrix will be used to compute
+        quantizers.
+    * - ``V4L2_AV1_QUANTIZATION_FLAG_DELTA_Q_PRESENT``
+      - 0x00000004
+      - Specifies whether quantizer index delta values are present.
+
+.. c:type:: v4l2_av1_tile_info
+
+AV1 Tile info as defined in section 6.8.14 "Tile info semantics" of ref:`av1`.
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}|
+
+.. flat-table:: struct v4l2_av1_tile_info
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``flags``
+      - See
+        :ref:`AV1 Tile Info flags <av1_tile_info_flags>` for more details.
+    * - __u8
+      - ``context_update_tile_id``
+      - Specifies which tile to use for the CDF update.
+    * - __u8
+      - ``tile_cols``
+      - Specifies the number of tiles across the frame.
+    * - __u8
+      - ``tile_rows``
+      - Specifies the number of tiles down the frame.
+    * - __u32
+      - ``mi_col_starts[V4L2_AV1_MAX_TILE_COLS + 1]``
+      - An array specifying the start column (in units of 4x4 luma
+        samples) for each tile across the image.
+    * - __u32
+      - ``mi_row_starts[V4L2_AV1_MAX_TILE_ROWS + 1]``
+      - An array specifying the start row (in units of 4x4 luma
+        samples) for each tile across the image.
+    * - __u32
+      - ``width_in_sbs_minus_1[V4L2_AV1_MAX_TILE_COLS]``
+      - Specifies the width of a tile minus 1 in units of superblocks.
+    * - __u32
+      - ``height_in_sbs_minus_1[V4L2_AV1_MAX_TILE_ROWS]``
+      - Specifies the height of a tile minus 1 in units of superblocks.
+    * - __u8
+      - ``tile_size_bytes``
+      - Specifies the number of bytes needed to code each tile size.
+    * - __u8
+      - ``reserved[3]``
+      - Applications and drivers must set this to zero.
+
+.. _av1_tile_info_flags:
+
+``AV1 Tile Info Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_TILE_INFO_FLAG_UNIFORM_TILE_SPACING``
+      - 0x00000001
+      - If set, means that the tiles are uniformly spaced across the frame. (In
+        other words, all tiles are the same size except for the ones at the
+        right and bottom edge which can be smaller). If not set means that the
+        tile sizes are coded.
+
+.. c:type:: v4l2_av1_frame_type
+
+AV1 Frame Type
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_KEY_FRAME``
+      - 0
+      - Key frame.
+    * - ``V4L2_AV1_INTER_FRAME``
+      - 1
+      - Inter frame.
+    * - ``V4L2_AV1_INTRA_ONLY_FRAME``
+      - 2
+      - Intra-only frame.
+    * - ``V4L2_AV1_SWITCH_FRAME``
+      - 3
+      - Switch frame.
+
+.. c:type:: v4l2_av1_interpolation_filter
+
+AV1 Interpolation Filter
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP``
+      - 0
+      - Eight tap filter.
+    * - ``V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SMOOTH``
+      - 1
+      - Eight tap smooth filter.
+    * - ``V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SHARP``
+      - 2
+      - Eight tap sharp filter.
+    * - ``V4L2_AV1_INTERPOLATION_FILTER_BILINEAR``
+      - 3
+      - Bilinear filter.
+    * - ``V4L2_AV1_INTERPOLATION_FILTER_SWITCHABLE``
+      - 4
+      - Filter selection is signaled at the block level.
+
+.. c:type:: v4l2_av1_tx_mode
+
+AV1 Tx mode as described in section 6.8.21 "TX mode semantics" of :ref:`av1`.
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_TX_MODE_ONLY_4X4``
+      - 0
+      -  The inverse transform will use only 4x4 transforms.
+    * - ``V4L2_AV1_TX_MODE_LARGEST``
+      - 1
+      - The inverse transform will use the largest transform size that fits
+        inside the block.
+    * - ``V4L2_AV1_TX_MODE_SELECT``
+      - 2
+      - The choice of transform size is specified explicitly for each block.
+
+``V4L2_CID_STATELESS_AV1_FRAME (struct)``
+    Represents a Frame Header OBU. See 6.8 "Frame Header OBU semantics" of
+    :ref:`av1` for more details.
+
+.. c:type:: v4l2_ctrl_av1_frame
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}|
+
+.. flat-table:: struct v4l2_ctrl_av1_frame
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - struct :c:type:`v4l2_av1_tile_info`
+      - ``tile_info``
+      - Tile info
+    * - struct :c:type:`v4l2_av1_quantization`
+      - ``quantization``
+      - Quantization parameters.
+    * - struct :c:type:`v4l2_av1_segmentation`
+      - ``segmentation``
+      - Segmentation parameters.
+    * - __u8
+      - ``superres_denom``
+      - The denominator for the upscaling ratio.
+    * - struct :c:type:`v4l2_av1_loop_filter`
+      - ``loop_filter``
+      - Loop filter params
+    * - struct :c:type:`v4l2_av1_cdef`
+      - ``cdef``
+      - CDEF params
+    * - __u8
+      - ``skip_mode_frame[2]``
+      - Specifies the frames to use for compound prediction when skip_mode is
+        equal to 1.
+    * - __u8
+      - ``primary_ref_frame``
+      - Specifies which reference frame contains the CDF values and other state
+        that should be loaded at the start of the frame.
+    * - struct :c:type:`v4l2_av1_loop_restoration`
+      - ``loop_restoration``
+      - Loop restoration parameters.
+    * - struct :c:type:`v4l2_av1_loop_global_motion`
+      - ``global_motion``
+      - Global motion parameters.
+    * - __u32
+      - ``flags``
+      - See
+        :ref:`AV1 Frame flags <av1_frame_flags>` for more details.
+    * - enum :c:type:`v4l2_av1_frame_type`
+      - ``frame_type``
+      - Specifies the AV1 frame type
+    * - __u32
+      - ``order_hint``
+      - Specifies OrderHintBits least significant bits of the expected output
+        order for this frame.
+    * - __u32
+      - ``upscaled_width``
+      - The upscaled width.
+    * - enum :c:type:`v4l2_av1_interpolation_filter`
+      - ``interpolation_filter``
+      - Specifies the filter selection used for performing inter prediction.
+    * - enum :c:type:`v4l2_av1_tx_mode`
+      - ``tx_mode``
+      - Specifies how the transform size is determined.
+    * - __u32
+      - ``frame_width_minus_1``
+      - Add 1 to get the frame's width.
+    * - __u32
+      - ``frame_height_minus_1``
+      - Add 1 to get the frame's height.
+    * - __u16
+      - ``render_width_minus_1``
+      - Add 1 to get the render width of the frame in luma samples.
+    * - __u16
+      - ``render_height_minus_1``
+      - Add 1 to get the render height of the frame in luma samples.
+    * - __u32
+      - ``current_frame_id``
+      - Specifies the frame id number for the current frame. Frame
+        id numbers are additional information that do not affect the decoding
+        process, but provide decoders with a way of detecting missing reference
+        frames so that appropriate action can be taken.
+    * - __u8
+      - ``buffer_removal_time[V4L2_AV1_MAX_OPERATING_POINTS]``
+      - Specifies the frame removal time in units of DecCT clock ticks counted
+        from the removal time of the last random access point for operating point
+        opNum.
+    * - __u8
+      - ``reserved[4]``
+      - Applications and drivers must set this to zero.
+    * - __u32
+      - ``order_hints[V4L2_AV1_TOTAL_REFS_PER_FRAME]``
+      - Specifies the expected output order hint for each reference frame.
+        This field corresponds to the OrderHints variable from the specification
+        (section 5.9.2  "Uncompressed header syntax"). As such, this is only
+        used for non-intra frames and ignored otherwise. order_hints[0] is
+        always ignored.
+    * - __u64
+      - ``reference_frame_ts[V4L2_AV1_TOTAL_REFS_PER_FRAME]``
+      - The V4L2 timestamp for each of the reference frames enumerated in
+        enum :c:type:`v4l2_av1_reference_frame` starting at
+        ``V4L2_AV1_REF_LAST_FRAME``. This represents the state of reference
+        slot as described in the spec and updated by userland through the
+        "Reference frame update process" in section 7.20 The timestamp refers
+        to the ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
+        :c:func:`v4l2_timeval_to_ns()` function to convert the struct
+        :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
+    * - __s8
+      - ``ref_frame_idx[V4L2_AV1_REFS_PER_FRAME]``
+      - An index into ``reference_frame_ts`` representing the ordered list of
+        references used by inter-frame. Matches the bitstream syntax
+        element of the same name.
+    * - __u8
+      - ``refresh_frame_flags``
+      - Contains a bitmask that specifies which reference frame slots will be
+        updated with the current frame after it is decoded.
+
+.. _av1_frame_flags:
+
+``AV1 Frame Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_FRAME_FLAG_SHOW_FRAME``
+      - 0x00000001
+      - If set, specifies that this frame should be immediately output once
+        decoded. If not set, specifies that this frame should not be immediately
+        output; it may be output later if a later uncompressed header uses
+        show_existing_frame equal to 1.
+    * - ``V4L2_AV1_FRAME_FLAG_SHOWABLE_FRAME``
+      - 0x00000002
+      - If set, specifies that the frame may be output using the
+        show_existing_frame mechanism. If not set, specifies that this frame
+        will not be output using the show_existing_frame mechanism.
+    * - ``V4L2_AV1_FRAME_FLAG_ERROR_RESILIENT_MODE``
+      - 0x00000004
+      - Specifies whether error resilient mode is enabled.
+    * - ``V4L2_AV1_FRAME_FLAG_DISABLE_CDF_UPDATE``
+      - 0x00000008
+      - Specifies whether the CDF update in the symbol decoding process should
+        be disabled.
+    * - ``V4L2_AV1_FRAME_FLAG_ALLOW_SCREEN_CONTENT_TOOLS``
+      - 0x00000010
+      - If set, indicates that intra blocks may use palette encoding. If not
+        set, indicates that palette encoding is never used.
+    * - ``V4L2_AV1_FRAME_FLAG_FORCE_INTEGER_MV``
+      - 0x00000020
+      - If set, specifies that motion vectors will always be integers. If not
+        set, specifies that motion vectors can contain fractional bits.
+    * - ``V4L2_AV1_FRAME_FLAG_ALLOW_INTRABC``
+      - 0x00000040
+      - If set, indicates that intra block copy may be used in this frame. If
+        not set, indicates that intra block copy is not allowed in this frame.
+    * - ``V4L2_AV1_FRAME_FLAG_USE_SUPERRES``
+      - 0x00000080
+      - If set, indicates that upscaling is needed.
+    * - ``V4L2_AV1_FRAME_FLAG_ALLOW_HIGH_PRECISION_MV``
+      - 0x00000100
+      - If set, specifies that motion vectors are specified to eighth pel
+        precision. If not set, specifies that motion vectors are specified to
+        quarter pel precision;
+    * - ``V4L2_AV1_FRAME_FLAG_IS_MOTION_MODE_SWITCHABLE``
+      - 0x00000200
+      - If not set, specifies that only the SIMPLE motion mode will be used.
+    * - ``V4L2_AV1_FRAME_FLAG_USE_REF_FRAME_MVS``
+      - 0x00000400
+      - If set specifies that motion vector information from a previous frame
+        can be used when decoding the current frame. If not set, specifies that
+        this information will not be used.
+    * - ``V4L2_AV1_FRAME_FLAG_DISABLE_FRAME_END_UPDATE_CDF``
+      - 0x00000800
+      - If set indicates that the end of frame CDF update is disabled. If not
+        set, indicates that the end of frame CDF update is enabled
+    * - ``V4L2_AV1_FRAME_FLAG_ALLOW_WARPED_MOTION``
+      - 0x00001000
+      - If set, indicates that the syntax element motion_mode may be present, if
+        not set, indicates that the syntax element motion_mode will not be
+        present.
+    * - ``V4L2_AV1_FRAME_FLAG_REFERENCE_SELECT``
+      - 0x00002000
+      - If set, specifies that the mode info for inter blocks contains the
+        syntax element comp_mode that indicates whether to use single or
+        compound reference prediction. If not set, specifies that all inter
+        blocks will use single prediction.
+    * - ``V4L2_AV1_FRAME_FLAG_REDUCED_TX_SET``
+      - 0x00004000
+      - If set, specifies that the frame is restricted to a reduced subset of
+        the full set of transform types.
+    * - ``V4L2_AV1_FRAME_FLAG_SKIP_MODE_ALLOWED``
+      - 0x00008000
+      - This flag retains the same meaning as SkipModeAllowed in :ref:`av1`.
+    * - ``V4L2_AV1_FRAME_FLAG_SKIP_MODE_PRESENT``
+      - 0x00010000
+      - If set, specifies that the syntax element skip_mode will be present, if
+        not set, specifies that skip_mode will not be used for this frame.
+    * - ``V4L2_AV1_FRAME_FLAG_FRAME_SIZE_OVERRIDE``
+      - 0x00020000
+      - If set, specifies that the frame size will either be specified as the
+        size of one of the reference frames, or computed from the
+        frame_width_minus_1 and frame_height_minus_1 syntax elements. If not
+        set, specifies that the frame size is equal to the size in the sequence
+        header.
+    * - ``V4L2_AV1_FRAME_FLAG_BUFFER_REMOVAL_TIME_PRESENT``
+      - 0x00040000
+      - If set, specifies that buffer_removal_time is present. If not set,
+        specifies that buffer_removal_time is not present.
+    * - ``V4L2_AV1_FRAME_FLAG_FRAME_REFS_SHORT_SIGNALING``
+      - 0x00080000
+      - If set, indicates that only two reference frames are explicitly
+        signaled. If not set, indicates that all reference frames are explicitly
+        signaled.
+
+``V4L2_CID_STATELESS_AV1_FILM_GRAIN (struct)``
+    Represents the optional film grain parameters. See section
+    6.8.20 "Film grain params semantics" of :ref:`av1` for more details.
+
+.. c:type:: v4l2_ctrl_av1_film_grain
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}|
+
+.. flat-table:: struct v4l2_ctrl_av1_film_grain
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``flags``
+      - See :ref:`AV1 Film Grain Flags <av1_film_grain_flags>`.
+    * - __u8
+      - ``cr_mult``
+      - Represents a multiplier for the cr component used in derivation of the
+        input index to the cr component scaling function.
+    * - __u16
+      - ``grain_seed``
+      - Specifies the starting value for the pseudo-random numbers used during
+        film grain synthesis.
+    * - __u8
+      - ``film_grain_params_ref_idx``
+      - Indicates which reference frame contains the film grain parameters to be
+	used for this frame.
+    * - __u8
+      - ``num_y_points``
+      - Specifies the number of points for the piece-wise linear scaling
+        function of the luma component.
+    * - __u8
+      - ``point_y_value[V4L2_AV1_MAX_NUM_Y_POINTS]``
+      - Represents the x (luma value) coordinate for the i-th point
+        of the piecewise linear scaling function for luma component. The values
+        are signaled on the scale of 0..255. In case of 10 bit video, these
+        values correspond to luma values divided by 4. In case of 12 bit video,
+        these values correspond to luma values divided by 16.
+    * - __u8
+      - ``point_y_scaling[V4L2_AV1_MAX_NUM_Y_POINTS]``
+      - Represents the scaling (output) value for the i-th point
+        of the piecewise linear scaling function for luma component.
+    * - __u8
+      - ``num_cb_points``
+      -  Specifies the number of points for the piece-wise linear scaling
+         function of the cb component.
+    * - __u8
+      - ``point_cb_value[V4L2_AV1_MAX_NUM_CB_POINTS]``
+      - Represents the x coordinate for the i-th point of the
+        piece-wise linear scaling function for cb component. The values are
+        signaled on the scale of 0..255.
+    * - __u8
+      - ``point_cb_scaling[V4L2_AV1_MAX_NUM_CB_POINTS]``
+      - Represents the scaling (output) value for the i-th point of the
+        piecewise linear scaling function for cb component.
+    * - __u8
+      - ``num_cr_points``
+      - Represents the number of points for the piece-wise
+        linear scaling function of the cr component.
+    * - __u8
+      - ``point_cr_value[V4L2_AV1_MAX_NUM_CR_POINTS]``
+      - Represents the x coordinate for the i-th point of the
+        piece-wise linear scaling function for cr component. The values are
+        signaled on the scale of 0..255.
+    * - __u8
+      - ``point_cr_scaling[V4L2_AV1_MAX_NUM_CR_POINTS]``
+      - Represents the scaling (output) value for the i-th point of the
+        piecewise linear scaling function for cr component.
+    * - __u8
+      - ``grain_scaling_minus_8``
+      - Represents the shift - 8 applied to the values of the chroma component.
+        The grain_scaling_minus_8 can take values of 0..3 and determines the
+        range and quantization step of the standard deviation of film grain.
+    * - __u8
+      - ``ar_coeff_lag``
+      - Specifies the number of auto-regressive coefficients for luma and
+        chroma.
+    * - __u8
+      - ``ar_coeffs_y_plus_128[V4L2_AV1_AR_COEFFS_SIZE]``
+      - Specifies auto-regressive coefficients used for the Y plane.
+    * - __u8
+      - ``ar_coeffs_cb_plus_128[V4L2_AV1_AR_COEFFS_SIZE]``
+      - Specifies auto-regressive coefficients used for the U plane.
+    * - __u8
+      - ``ar_coeffs_cr_plus_128[V4L2_AV1_AR_COEFFS_SIZE]``
+      - Specifies auto-regressive coefficients used for the V plane.
+    * - __u8
+      - ``ar_coeff_shift_minus_6``
+      - Specifies the range of the auto-regressive coefficients. Values of 0,
+        1, 2, and 3 correspond to the ranges for auto-regressive coefficients of
+        [-2, 2), [-1, 1), [-0.5, 0.5) and [-0.25, 0.25) respectively.
+    * - __u8
+      - ``grain_scale_shift``
+      - Specifies how much the Gaussian random numbers should be scaled down
+        during the grain synthesis process.
+    * - __u8
+      - ``cb_mult``
+      - Represents a multiplier for the cb component used in derivation of the
+        input index to the cb component scaling function.
+    * - __u8
+      - ``cb_luma_mult``
+      - Represents a multiplier for the average luma component used in
+        derivation of the input index to the cb component scaling function..
+    * - __u8
+      - ``cr_luma_mult``
+      - Represents a multiplier for the average luma component used in
+        derivation of the input index to the cr component scaling function.
+    * - __u16
+      - ``cb_offset``
+      - Represents an offset used in derivation of the input index to the
+        cb component scaling function.
+    * - __u16
+      - ``cr_offset``
+      - Represents an offset used in derivation of the input index to the
+        cr component scaling function.
+    * - __u8
+      - ``reserved[4]``
+      - Applications and drivers must set this to zero.
+
+.. _av1_film_grain_flags:
+
+``AV1 Film Grain Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_FILM_GRAIN_FLAG_APPLY_GRAIN``
+      - 0x00000001
+      - If set, specifies that film grain should be added to this frame. If not
+        set, specifies that film grain should not be added.
+    * - ``V4L2_AV1_FILM_GRAIN_FLAG_UPDATE_GRAIN``
+      - 0x00000002
+      - If set, means that a new set of parameters should be sent. If not set,
+        specifies that the previous set of parameters should be used.
+    * - ``V4L2_AV1_FILM_GRAIN_FLAG_CHROMA_SCALING_FROM_LUMA``
+      - 0x00000004
+      - If set, specifies that the chroma scaling is inferred from the luma
+        scaling.
+    * - ``V4L2_AV1_FILM_GRAIN_FLAG_OVERLAP``
+      - 0x00000008
+      - If set, indicates that the overlap between film grain blocks shall be
+        applied. If not set, indicates that the overlap between film grain blocks
+        shall not be applied.
+    * - ``V4L2_AV1_FILM_GRAIN_FLAG_CLIP_TO_RESTRICTED_RANGE``
+      - 0x00000010
+      - If set, indicates that clipping to the restricted (studio, i.e. limited)
+        range shall be applied to the sample values after adding the film grain
+        (see the semantics for color_range for an explanation of studio swing).
+        If not set, indicates that clipping to the full range shall be applied
+        to the sample values after adding the film grain.
diff --git a/Documentation/userspace-api/media/v4l/meta-formats.rst b/Documentation/userspace-api/media/v4l/meta-formats.rst
index fff25357fe860..0bb61fc5bc008 100644
--- a/Documentation/userspace-api/media/v4l/meta-formats.rst
+++ b/Documentation/userspace-api/media/v4l/meta-formats.rst
@@ -12,10 +12,10 @@ These formats are used for the :ref:`metadata` interface only.
 .. toctree::
     :maxdepth: 1
 
-    pixfmt-meta-d4xx
-    pixfmt-meta-intel-ipu3
-    pixfmt-meta-rkisp1
-    pixfmt-meta-uvc
-    pixfmt-meta-vsp1-hgo
-    pixfmt-meta-vsp1-hgt
-    pixfmt-meta-vivid
+    metafmt-d4xx
+    metafmt-intel-ipu3
+    metafmt-rkisp1
+    metafmt-uvc
+    metafmt-vsp1-hgo
+    metafmt-vsp1-hgt
+    metafmt-vivid
diff --git a/Documentation/userspace-api/media/v4l/metafmt-d4xx.rst b/Documentation/userspace-api/media/v4l/metafmt-d4xx.rst
new file mode 100644
index 0000000000000..541836074f949
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/metafmt-d4xx.rst
@@ -0,0 +1,252 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _v4l2-meta-fmt-d4xx:
+
+*******************************
+V4L2_META_FMT_D4XX ('D4XX')
+*******************************
+
+Intel D4xx UVC Cameras Metadata
+
+
+Description
+===========
+
+Intel D4xx (D435, D455 and others) cameras include per-frame metadata in their UVC
+payload headers, following the Microsoft(R) UVC extension proposal [1_]. That
+means, that the private D4XX metadata, following the standard UVC header, is
+organised in blocks. D4XX cameras implement several standard block types,
+proposed by Microsoft, and several proprietary ones. Supported standard metadata
+types are MetadataId_CaptureStats (ID 3), MetadataId_CameraExtrinsics (ID 4),
+and MetadataId_CameraIntrinsics (ID 5). For their description see [1_]. This
+document describes proprietary metadata types, used by D4xx cameras.
+
+V4L2_META_FMT_D4XX buffers follow the metadata buffer layout of
+V4L2_META_FMT_UVC with the only difference, that it also includes proprietary
+payload header data. D4xx cameras use bulk transfers and only send one payload
+per frame, therefore their headers cannot be larger than 255 bytes.
+
+This document implements Intel Configuration version 3 [9_].
+
+Below are proprietary Microsoft style metadata types, used by D4xx cameras,
+where all fields are in little endian order:
+
+.. tabularcolumns:: |p{5.0cm}|p{12.5cm}|
+
+
+.. flat-table:: D4xx metadata
+    :widths: 1 2
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - **Field**
+      - **Description**
+    * - :cspan:`1` *Depth Control*
+    * - __u32 ID
+      - 0x80000000
+    * - __u32 Size
+      - Size in bytes, include ID (all protocol versions: 60)
+    * - __u32 Version
+      - Version of this structure. The documentation herein covers versions 1,
+        2 and 3. The version number will be incremented when new fields are
+        added.
+    * - __u32 Flags
+      - A bitmask of flags: see [2_] below
+    * - __u32 Gain
+      - Gain value in internal units, same as the V4L2_CID_GAIN control, used to
+	capture the frame
+    * - __u32 Exposure
+      - Exposure time (in microseconds) used to capture the frame
+    * - __u32 Laser power
+      - Power of the laser LED 0-360, used for depth measurement
+    * - __u32 AE mode
+      - 0: manual; 1: automatic exposure
+    * - __u32 Exposure priority
+      - Exposure priority value: 0 - constant frame rate
+    * - __u32 AE ROI left
+      - Left border of the AE Region of Interest (all ROI values are in pixels
+	and lie between 0 and maximum width or height respectively)
+    * - __u32 AE ROI right
+      - Right border of the AE Region of Interest
+    * - __u32 AE ROI top
+      - Top border of the AE Region of Interest
+    * - __u32 AE ROI bottom
+      - Bottom border of the AE Region of Interest
+    * - __u32 Preset
+      - Preset selector value, default: 0, unless changed by the user
+    * - __u8 Emitter mode (v3 only) (__u32 Laser mode for v1) [8_]
+      - 0: off, 1: on, same as __u32 Laser mode for v1
+    * - __u8 RFU byte (v3 only)
+      - Spare byte for future use
+    * - __u16 LED Power (v3 only)
+      - Led power value 0-360 (F416 SKU)
+    * - :cspan:`1` *Capture Timing*
+    * - __u32 ID
+      - 0x80000001
+    * - __u32 Size
+      - Size in bytes, include ID (all protocol versions: 40)
+    * - __u32 Version
+      - Version of this structure. The documentation herein corresponds to
+        version xxx. The version number will be incremented when new fields are
+        added.
+    * - __u32 Flags
+      - A bitmask of flags: see [3_] below
+    * - __u32 Frame counter
+      - Monotonically increasing counter
+    * - __u32 Optical time
+      - Time in microseconds from the beginning of a frame till its middle
+    * - __u32 Readout time
+      - Time, used to read out a frame in microseconds
+    * - __u32 Exposure time
+      - Frame exposure time in microseconds
+    * - __u32 Frame interval
+      - In microseconds = 1000000 / framerate
+    * - __u32 Pipe latency
+      - Time in microseconds from start of frame to data in USB buffer
+    * - :cspan:`1` *Configuration*
+    * - __u32 ID
+      - 0x80000002
+    * - __u32 Size
+      - Size in bytes, include ID (v1:36, v3:40)
+    * - __u32 Version
+      - Version of this structure. The documentation herein corresponds to
+        version xxx. The version number will be incremented when new fields are
+        added.
+    * - __u32 Flags
+      - A bitmask of flags: see [4_] below
+    * - __u8 Hardware type
+      - Camera hardware version [5_]
+    * - __u8 SKU ID
+      - Camera hardware configuration [6_]
+    * - __u32 Cookie
+      - Internal synchronisation
+    * - __u16 Format
+      - Image format code [7_]
+    * - __u16 Width
+      - Width in pixels
+    * - __u16 Height
+      - Height in pixels
+    * - __u16 Framerate
+      - Requested frame rate per second
+    * - __u16 Trigger
+      - Byte 0: bit 0: depth and RGB are synchronised, bit 1: external trigger
+    * - __u16 Calibration count (v3 only)
+      - Calibration counter, see [4_] below
+    * - __u8 GPIO input data (v3 only)
+      - GPIO readout, see [4_] below (Supported from FW 5.12.7.0)
+    * - __u32 Sub-preset info (v3 only)
+      - Sub-preset choice information, see [4_] below
+    * - __u8 reserved (v3 only)
+      - RFU byte.
+
+.. _1:
+
+[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/stream/uvc-extensions-1-5
+
+.. _2:
+
+[2] Depth Control flags specify which fields are valid: ::
+
+  0x00000001 Gain
+  0x00000002 Exposure
+  0x00000004 Laser power
+  0x00000008 AE mode
+  0x00000010 Exposure priority
+  0x00000020 AE ROI
+  0x00000040 Preset
+  0x00000080 Emitter mode
+  0x00000100 LED Power
+
+.. _3:
+
+[3] Capture Timing flags specify which fields are valid: ::
+
+  0x00000001 Frame counter
+  0x00000002 Optical time
+  0x00000004 Readout time
+  0x00000008 Exposure time
+  0x00000010 Frame interval
+  0x00000020 Pipe latency
+
+.. _4:
+
+[4] Configuration flags specify which fields are valid: ::
+
+  0x00000001 Hardware type
+  0x00000002 SKU ID
+  0x00000004 Cookie
+  0x00000008 Format
+  0x00000010 Width
+  0x00000020 Height
+  0x00000040 Framerate
+  0x00000080 Trigger
+  0x00000100 Cal count
+  0x00000200 GPIO Input Data
+  0x00000400 Sub-preset Info
+
+.. _5:
+
+[5] Camera model: ::
+
+  0 DS5
+  1 IVCAM2
+
+.. _6:
+
+[6] 8-bit camera hardware configuration bitfield: ::
+
+  [1:0] depthCamera
+	00: no depth
+	01: standard depth
+	10: wide depth
+	11: reserved
+  [2]   depthIsActive - has a laser projector
+  [3]   RGB presence
+  [4]   Inertial Measurement Unit (IMU) presence
+  [5]   projectorType
+	0: HPTG
+	1: Princeton
+  [6]   0: a projector, 1: an LED
+  [7]   reserved
+
+.. _7:
+
+[7] Image format codes per video streaming interface:
+
+Depth: ::
+
+  1 Z16
+  2 Z
+
+Left sensor: ::
+
+  1 Y8
+  2 UYVY
+  3 R8L8
+  4 Calibration
+  5 W10
+
+Fish Eye sensor: ::
+
+  1 RAW8
+
+.. _8:
+
+[8] The "Laser mode" has been replaced in version 3 by three different fields.
+"Laser" has been renamed to "Emitter" as there are multiple technologies for
+camera projectors. As we have another field for "Laser Power" we introduced
+"LED Power" for extra emitter.
+
+The "Laser mode" __u32 fiels has been split into: ::
+   1 __u8 Emitter mode
+   2 __u8 RFU byte
+   3 __u16 LED Power
+
+This is a change between versions 1 and 3. All versions 1, 2 and 3 are backward
+compatible with the same data format and they are supported. See [2_] for which
+attributes are valid.
+
+.. _9:
+
+[9] LibRealSense SDK metadata source:
+https://github.com/IntelRealSense/librealsense/blob/master/src/metadata.h
diff --git a/Documentation/userspace-api/media/v4l/metafmt-intel-ipu3.rst b/Documentation/userspace-api/media/v4l/metafmt-intel-ipu3.rst
new file mode 100644
index 0000000000000..84d81dd7a7b5e
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/metafmt-intel-ipu3.rst
@@ -0,0 +1,81 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
+
+.. _v4l2-meta-fmt-params:
+.. _v4l2-meta-fmt-stat-3a:
+
+******************************************************************
+V4L2_META_FMT_IPU3_PARAMS ('ip3p'), V4L2_META_FMT_IPU3_3A ('ip3s')
+******************************************************************
+
+.. ipu3_uapi_stats_3a
+
+3A statistics
+=============
+
+The IPU3 ImgU 3A statistics accelerators collect different statistics over
+an input Bayer frame. Those statistics are obtained from the "ipu3-imgu [01] 3a
+stat" metadata capture video nodes, using the :c:type:`v4l2_meta_format`
+interface. They are formatted as described by the :c:type:`ipu3_uapi_stats_3a`
+structure.
+
+The statistics collected are AWB (Auto-white balance) RGBS (Red, Green, Blue and
+Saturation measure) cells, AWB filter response, AF (Auto-focus) filter response,
+and AE (Auto-exposure) histogram.
+
+The struct :c:type:`ipu3_uapi_4a_config` saves all configurable parameters.
+
+.. code-block:: c
+
+	struct ipu3_uapi_stats_3a {
+		struct ipu3_uapi_awb_raw_buffer awb_raw_buffer;
+		struct ipu3_uapi_ae_raw_buffer_aligned ae_raw_buffer[IPU3_UAPI_MAX_STRIPES];
+		struct ipu3_uapi_af_raw_buffer af_raw_buffer;
+		struct ipu3_uapi_awb_fr_raw_buffer awb_fr_raw_buffer;
+		struct ipu3_uapi_4a_config stats_4a_config;
+		__u32 ae_join_buffers;
+		__u8 padding[28];
+		struct ipu3_uapi_stats_3a_bubble_info_per_stripe stats_3a_bubble_per_stripe;
+		struct ipu3_uapi_ff_status stats_3a_status;
+	};
+
+.. ipu3_uapi_params
+
+Pipeline parameters
+===================
+
+The pipeline parameters are passed to the "ipu3-imgu [01] parameters" metadata
+output video nodes, using the :c:type:`v4l2_meta_format` interface. They are
+formatted as described by the :c:type:`ipu3_uapi_params` structure.
+
+Both 3A statistics and pipeline parameters described here are closely tied to
+the underlying camera sub-system (CSS) APIs. They are usually consumed and
+produced by dedicated user space libraries that comprise the important tuning
+tools, thus freeing the developers from being bothered with the low level
+hardware and algorithm details.
+
+.. code-block:: c
+
+	struct ipu3_uapi_params {
+		/* Flags which of the settings below are to be applied */
+		struct ipu3_uapi_flags use;
+
+		/* Accelerator cluster parameters */
+		struct ipu3_uapi_acc_param acc_param;
+
+		/* ISP vector address space parameters */
+		struct ipu3_uapi_isp_lin_vmem_params lin_vmem_params;
+		struct ipu3_uapi_isp_tnr3_vmem_params tnr3_vmem_params;
+		struct ipu3_uapi_isp_xnr3_vmem_params xnr3_vmem_params;
+
+		/* ISP data memory (DMEM) parameters */
+		struct ipu3_uapi_isp_tnr3_params tnr3_dmem_params;
+		struct ipu3_uapi_isp_xnr3_params xnr3_dmem_params;
+
+		/* Optical black level compensation */
+		struct ipu3_uapi_obgrid_param obgrid_param;
+	};
+
+Intel IPU3 ImgU uAPI data types
+===============================
+
+.. kernel-doc:: drivers/staging/media/ipu3/include/uapi/intel-ipu3.h
diff --git a/Documentation/userspace-api/media/v4l/metafmt-rkisp1.rst b/Documentation/userspace-api/media/v4l/metafmt-rkisp1.rst
new file mode 100644
index 0000000000000..fa04f00bcd2ed
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/metafmt-rkisp1.rst
@@ -0,0 +1,50 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _v4l2-meta-fmt-rk-isp1-params:
+
+.. _v4l2-meta-fmt-rk-isp1-stat-3a:
+
+*****************************************************************************
+V4L2_META_FMT_RK_ISP1_PARAMS ('rk1p'), V4L2_META_FMT_RK_ISP1_STAT_3A ('rk1s')
+*****************************************************************************
+
+Configuration parameters
+========================
+
+The configuration parameters are passed to the
+:ref:`rkisp1_params <rkisp1_params>` metadata output video node, using
+the :c:type:`v4l2_meta_format` interface. The buffer contains
+a single instance of the C structure :c:type:`rkisp1_params_cfg` defined in
+``rkisp1-config.h``. So the structure can be obtained from the buffer by:
+
+.. code-block:: c
+
+	struct rkisp1_params_cfg *params = (struct rkisp1_params_cfg*) buffer;
+
+.. rkisp1_stat_buffer
+
+3A and histogram statistics
+===========================
+
+The ISP1 device collects different statistics over an input Bayer frame.
+Those statistics are obtained from the :ref:`rkisp1_stats <rkisp1_stats>`
+metadata capture video node,
+using the :c:type:`v4l2_meta_format` interface. The buffer contains a single
+instance of the C structure :c:type:`rkisp1_stat_buffer` defined in
+``rkisp1-config.h``. So the structure can be obtained from the buffer by:
+
+.. code-block:: c
+
+	struct rkisp1_stat_buffer *stats = (struct rkisp1_stat_buffer*) buffer;
+
+The statistics collected are Exposure, AWB (Auto-white balance), Histogram and
+AF (Auto-focus). See :c:type:`rkisp1_stat_buffer` for details of the statistics.
+
+The 3A statistics and configuration parameters described here are usually
+consumed and produced by dedicated user space libraries that comprise the
+important tuning tools using software control loop.
+
+rkisp1 uAPI data types
+======================
+
+.. kernel-doc:: include/uapi/linux/rkisp1-config.h
diff --git a/Documentation/userspace-api/media/v4l/metafmt-uvc.rst b/Documentation/userspace-api/media/v4l/metafmt-uvc.rst
new file mode 100644
index 0000000000000..784346d14bbdb
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/metafmt-uvc.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _v4l2-meta-fmt-uvc:
+
+*******************************
+V4L2_META_FMT_UVC ('UVCH')
+*******************************
+
+UVC Payload Header Data
+
+
+Description
+===========
+
+This format describes standard UVC metadata, extracted from UVC packet headers
+and provided by the UVC driver through metadata video nodes. That data includes
+exact copies of the standard part of UVC Payload Header contents and auxiliary
+timing information, required for precise interpretation of timestamps, contained
+in those headers. See section "2.4.3.3 Video and Still Image Payload Headers" of
+the "UVC 1.5 Class specification" for details.
+
+Each UVC payload header can be between 2 and 12 bytes large. Buffers can
+contain multiple headers, if multiple such headers have been transmitted by the
+camera for the respective frame. However, the driver may drop headers when the
+buffer is full, when they contain no useful information (e.g. those without the
+SCR field or with that field identical to the previous header), or generally to
+perform rate limiting when the device sends a large number of headers.
+
+Each individual block contains the following fields:
+
+.. flat-table:: UVC Metadata Block
+    :widths: 1 4
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Field
+      - Description
+    * - __u64 ts;
+      - system timestamp in host byte order, measured by the driver upon
+        reception of the payload
+    * - __u16 sof;
+      - USB Frame Number in host byte order, also obtained by the driver as
+        close as possible to the above timestamp to enable correlation between
+        them
+    * - :cspan:`1` *The rest is an exact copy of the UVC payload header:*
+    * - __u8 length;
+      - length of the rest of the block, including this field
+    * - __u8 flags;
+      - Flags, indicating presence of other standard UVC fields
+    * - __u8 buf[];
+      - The rest of the header, possibly including UVC PTS and SCR fields
diff --git a/Documentation/userspace-api/media/v4l/metafmt-vivid.rst b/Documentation/userspace-api/media/v4l/metafmt-vivid.rst
new file mode 100644
index 0000000000000..7173e2c3e245c
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/metafmt-vivid.rst
@@ -0,0 +1,36 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
+
+.. _v4l2-meta-fmt-vivid:
+
+*******************************
+V4L2_META_FMT_VIVID ('VIVD')
+*******************************
+
+VIVID Metadata Format
+
+
+Description
+===========
+
+This describes metadata format used by the vivid driver.
+
+It sets Brightness, Saturation, Contrast and Hue, each of which maps to
+corresponding controls of the vivid driver with respect to the range and default values.
+
+It contains the following fields:
+
+.. flat-table:: VIVID Metadata
+    :widths: 1 4
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Field
+      - Description
+    * - u16 brightness;
+      - Image brightness, the value is in the range 0 to 255, with the default value as 128.
+    * - u16 contrast;
+      - Image contrast, the value is in the range 0 to 255, with the default value as 128.
+    * - u16 saturation;
+      - Image color saturation, the value is in the range 0 to 255, with the default value as 128.
+    * - s16 hue;
+      - Image color balance, the value is in the range -128 to 128, with the default value as 0.
diff --git a/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgo.rst b/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgo.rst
new file mode 100644
index 0000000000000..8d886feb180ca
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgo.rst
@@ -0,0 +1,168 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _v4l2-meta-fmt-vsp1-hgo:
+
+*******************************
+V4L2_META_FMT_VSP1_HGO ('VSPH')
+*******************************
+
+Renesas R-Car VSP1 1-D Histogram Data
+
+
+Description
+===========
+
+This format describes histogram data generated by the Renesas R-Car VSP1 1-D
+Histogram (HGO) engine.
+
+The VSP1 HGO is a histogram computation engine that can operate on RGB, YCrCb
+or HSV data. It operates on a possibly cropped and subsampled input image and
+computes the minimum, maximum and sum of all pixels as well as per-channel
+histograms.
+
+The HGO can compute histograms independently per channel, on the maximum of the
+three channels (RGB data only) or on the Y channel only (YCbCr only). It can
+additionally output the histogram with 64 or 256 bins, resulting in four
+possible modes of operation.
+
+- In *64 bins normal mode*, the HGO operates on the three channels independently
+  to compute three 64-bins histograms. RGB, YCbCr and HSV image formats are
+  supported.
+- In *64 bins maximum mode*, the HGO operates on the maximum of the (R, G, B)
+  channels to compute a single 64-bins histogram. Only the RGB image format is
+  supported.
+- In *256 bins normal mode*, the HGO operates on the Y channel to compute a
+  single 256-bins histogram. Only the YCbCr image format is supported.
+- In *256 bins maximum mode*, the HGO operates on the maximum of the (R, G, B)
+  channels to compute a single 256-bins histogram. Only the RGB image format is
+  supported.
+
+**Byte Order.**
+All data is stored in memory in little endian format. Each cell in the tables
+contains one byte.
+
+.. flat-table:: VSP1 HGO Data - 64 Bins, Normal Mode (792 bytes)
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Offset
+      - :cspan:`4` Memory
+    * -
+      - [31:24]
+      - [23:16]
+      - [15:8]
+      - [7:0]
+    * - 0
+      -
+      - R/Cr/H max [7:0]
+      -
+      - R/Cr/H min [7:0]
+    * - 4
+      -
+      - G/Y/S max [7:0]
+      -
+      - G/Y/S min [7:0]
+    * - 8
+      -
+      - B/Cb/V max [7:0]
+      -
+      - B/Cb/V min [7:0]
+    * - 12
+      - :cspan:`4` R/Cr/H sum [31:0]
+    * - 16
+      - :cspan:`4` G/Y/S sum [31:0]
+    * - 20
+      - :cspan:`4` B/Cb/V sum [31:0]
+    * - 24
+      - :cspan:`4` R/Cr/H bin 0 [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 276
+      - :cspan:`4` R/Cr/H bin 63 [31:0]
+    * - 280
+      - :cspan:`4` G/Y/S bin 0 [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 532
+      - :cspan:`4` G/Y/S bin 63 [31:0]
+    * - 536
+      - :cspan:`4` B/Cb/V bin 0 [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 788
+      - :cspan:`4` B/Cb/V bin 63 [31:0]
+
+.. flat-table:: VSP1 HGO Data - 64 Bins, Max Mode (264 bytes)
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Offset
+      - :cspan:`4` Memory
+    * -
+      - [31:24]
+      - [23:16]
+      - [15:8]
+      - [7:0]
+    * - 0
+      -
+      - max(R,G,B) max [7:0]
+      -
+      - max(R,G,B) min [7:0]
+    * - 4
+      - :cspan:`4` max(R,G,B) sum [31:0]
+    * - 8
+      - :cspan:`4` max(R,G,B) bin 0 [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 260
+      - :cspan:`4` max(R,G,B) bin 63 [31:0]
+
+.. flat-table:: VSP1 HGO Data - 256 Bins, Normal Mode (1032 bytes)
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Offset
+      - :cspan:`4` Memory
+    * -
+      - [31:24]
+      - [23:16]
+      - [15:8]
+      - [7:0]
+    * - 0
+      -
+      - Y max [7:0]
+      -
+      - Y min [7:0]
+    * - 4
+      - :cspan:`4` Y sum [31:0]
+    * - 8
+      - :cspan:`4` Y bin 0 [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 1028
+      - :cspan:`4` Y bin 255 [31:0]
+
+.. flat-table:: VSP1 HGO Data - 256 Bins, Max Mode (1032 bytes)
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Offset
+      - :cspan:`4` Memory
+    * -
+      - [31:24]
+      - [23:16]
+      - [15:8]
+      - [7:0]
+    * - 0
+      -
+      - max(R,G,B) max [7:0]
+      -
+      - max(R,G,B) min [7:0]
+    * - 4
+      - :cspan:`4` max(R,G,B) sum [31:0]
+    * - 8
+      - :cspan:`4` max(R,G,B) bin 0 [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 1028
+      - :cspan:`4` max(R,G,B) bin 255 [31:0]
diff --git a/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgt.rst b/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgt.rst
new file mode 100644
index 0000000000000..d8830ff605de4
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgt.rst
@@ -0,0 +1,129 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _v4l2-meta-fmt-vsp1-hgt:
+
+*******************************
+V4L2_META_FMT_VSP1_HGT ('VSPT')
+*******************************
+
+Renesas R-Car VSP1 2-D Histogram Data
+
+
+Description
+===========
+
+This format describes histogram data generated by the Renesas R-Car VSP1
+2-D Histogram (HGT) engine.
+
+The VSP1 HGT is a histogram computation engine that operates on HSV
+data. It operates on a possibly cropped and subsampled input image and
+computes the sum, maximum and minimum of the S component as well as a
+weighted frequency histogram based on the H and S components.
+
+The histogram is a matrix of 6 Hue and 32 Saturation buckets, 192 in
+total. Each HSV value is added to one or more buckets with a weight
+between 1 and 16 depending on the Hue areas configuration. Finding the
+corresponding buckets is done by inspecting the H and S value independently.
+
+The Saturation position **n** (0 - 31) of the bucket in the matrix is
+found by the expression:
+
+    n = S / 8
+
+The Hue position **m** (0 - 5) of the bucket in the matrix depends on
+how the HGT Hue areas are configured. There are 6 user configurable Hue
+Areas which can be configured to cover overlapping Hue values:
+
+.. raw:: latex
+
+    \small
+
+::
+
+         Area 0       Area 1       Area 2       Area 3       Area 4       Area 5
+        ________     ________     ________     ________     ________     ________
+   \   /|      |\   /|      |\   /|      |\   /|      |\   /|      |\   /|      |\   /
+    \ / |      | \ / |      | \ / |      | \ / |      | \ / |      | \ / |      | \ /
+     X  |      |  X  |      |  X  |      |  X  |      |  X  |      |  X  |      |  X
+    / \ |      | / \ |      | / \ |      | / \ |      | / \ |      | / \ |      | / \
+   /   \|      |/   \|      |/   \|      |/   \|      |/   \|      |/   \|      |/   \
+  5U   0L      0U   1L      1U   2L      2U   3L      3U   4L      4U   5L      5U   0L
+        <0..............................Hue Value............................255>
+
+
+.. raw:: latex
+
+    \normalsize
+
+When two consecutive areas don't overlap (n+1L is equal to nU) the boundary
+value is considered as part of the lower area.
+
+Pixels with a hue value included in the centre of an area (between nL and nU
+included) are attributed to that single area and given a weight of 16. Pixels
+with a hue value included in the overlapping region between two areas (between
+n+1L and nU excluded) are attributed to both areas and given a weight for each
+of these areas proportional to their position along the diagonal lines
+(rounded down).
+
+The Hue area setup must match one of the following constrains:
+
+::
+
+    0L <= 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U
+
+::
+
+    0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U <= 0L
+
+**Byte Order.**
+All data is stored in memory in little endian format. Each cell in the tables
+contains one byte.
+
+.. flat-table:: VSP1 HGT Data - (776 bytes)
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Offset
+      - :cspan:`4` Memory
+    * -
+      - [31:24]
+      - [23:16]
+      - [15:8]
+      - [7:0]
+    * - 0
+      - -
+      - S max [7:0]
+      - -
+      - S min [7:0]
+    * - 4
+      - :cspan:`4` S sum [31:0]
+    * - 8
+      - :cspan:`4` Histogram bucket (m=0, n=0) [31:0]
+    * - 12
+      - :cspan:`4` Histogram bucket (m=0, n=1) [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 132
+      - :cspan:`4` Histogram bucket (m=0, n=31) [31:0]
+    * - 136
+      - :cspan:`4` Histogram bucket (m=1, n=0) [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 264
+      - :cspan:`4` Histogram bucket (m=2, n=0) [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 392
+      - :cspan:`4` Histogram bucket (m=3, n=0) [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 520
+      - :cspan:`4` Histogram bucket (m=4, n=0) [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 648
+      - :cspan:`4` Histogram bucket (m=5, n=0) [31:0]
+    * -
+      - :cspan:`4` ...
+    * - 772
+      - :cspan:`4` Histogram bucket (m=5, n=31) [31:0]
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
index 06b78e5589d27..806ed73ac474c 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
@@ -258,6 +258,22 @@ Compressed Formats
         RV9 players - the format and decoder did not change, only
         the encoder did. As a result, it uses the same FourCC.
 
+    * .. _V4L2-PIX-FMT-AV1-FRAME:
+
+      - ``V4L2_PIX_FMT_AV1_FRAME``
+      - 'AV1F'
+      - AV1 parsed frame, including the frame header, as extracted from the container.
+        This format is adapted for stateless video decoders that implement a AV1
+        pipeline with the :ref:`stateless_decoder`. Metadata associated with the
+        frame to decode is required to be passed through the
+        ``V4L2_CID_STATELESS_AV1_SEQUENCE``, ``V4L2_CID_STATELESS_AV1_FRAME``,
+        and ``V4L2_CID_STATELESS_AV1_TILE_GROUP_ENTRY`` controls.
+        See the :ref:`associated Codec Control IDs <v4l2-codec-stateless-av1>`.
+        Exactly one output and one capture buffer must be provided for use with
+        this pixel format. The output buffer must contain the appropriate number
+        of macroblocks to decode a full corresponding frame to the matching
+        capture buffer.
+
 .. raw:: latex
 
     \normalsize
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-d4xx.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-d4xx.rst
deleted file mode 100644
index 4e437ba97a0ec..0000000000000
--- a/Documentation/userspace-api/media/v4l/pixfmt-meta-d4xx.rst
+++ /dev/null
@@ -1,213 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-
-.. _v4l2-meta-fmt-d4xx:
-
-*******************************
-V4L2_META_FMT_D4XX ('D4XX')
-*******************************
-
-Intel D4xx UVC Cameras Metadata
-
-
-Description
-===========
-
-Intel D4xx (D435 and other) cameras include per-frame metadata in their UVC
-payload headers, following the Microsoft(R) UVC extension proposal [1_]. That
-means, that the private D4XX metadata, following the standard UVC header, is
-organised in blocks. D4XX cameras implement several standard block types,
-proposed by Microsoft, and several proprietary ones. Supported standard metadata
-types are MetadataId_CaptureStats (ID 3), MetadataId_CameraExtrinsics (ID 4),
-and MetadataId_CameraIntrinsics (ID 5). For their description see [1_]. This
-document describes proprietary metadata types, used by D4xx cameras.
-
-V4L2_META_FMT_D4XX buffers follow the metadata buffer layout of
-V4L2_META_FMT_UVC with the only difference, that it also includes proprietary
-payload header data. D4xx cameras use bulk transfers and only send one payload
-per frame, therefore their headers cannot be larger than 255 bytes.
-
-Below are proprietary Microsoft style metadata types, used by D4xx cameras,
-where all fields are in little endian order:
-
-.. tabularcolumns:: |p{5.0cm}|p{12.5cm}|
-
-
-.. flat-table:: D4xx metadata
-    :widths: 1 2
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - **Field**
-      - **Description**
-    * - :cspan:`1` *Depth Control*
-    * - __u32 ID
-      - 0x80000000
-    * - __u32 Size
-      - Size in bytes (currently 56)
-    * - __u32 Version
-      - Version of this structure. The documentation herein corresponds to
-        version xxx. The version number will be incremented when new fields are
-        added.
-    * - __u32 Flags
-      - A bitmask of flags: see [2_] below
-    * - __u32 Gain
-      - Gain value in internal units, same as the V4L2_CID_GAIN control, used to
-	capture the frame
-    * - __u32 Exposure
-      - Exposure time (in microseconds) used to capture the frame
-    * - __u32 Laser power
-      - Power of the laser LED 0-360, used for depth measurement
-    * - __u32 AE mode
-      - 0: manual; 1: automatic exposure
-    * - __u32 Exposure priority
-      - Exposure priority value: 0 - constant frame rate
-    * - __u32 AE ROI left
-      - Left border of the AE Region of Interest (all ROI values are in pixels
-	and lie between 0 and maximum width or height respectively)
-    * - __u32 AE ROI right
-      - Right border of the AE Region of Interest
-    * - __u32 AE ROI top
-      - Top border of the AE Region of Interest
-    * - __u32 AE ROI bottom
-      - Bottom border of the AE Region of Interest
-    * - __u32 Preset
-      - Preset selector value, default: 0, unless changed by the user
-    * - __u32 Laser mode
-      - 0: off, 1: on
-    * - :cspan:`1` *Capture Timing*
-    * - __u32 ID
-      - 0x80000001
-    * - __u32 Size
-      - Size in bytes (currently 40)
-    * - __u32 Version
-      - Version of this structure. The documentation herein corresponds to
-        version xxx. The version number will be incremented when new fields are
-        added.
-    * - __u32 Flags
-      - A bitmask of flags: see [3_] below
-    * - __u32 Frame counter
-      - Monotonically increasing counter
-    * - __u32 Optical time
-      - Time in microseconds from the beginning of a frame till its middle
-    * - __u32 Readout time
-      - Time, used to read out a frame in microseconds
-    * - __u32 Exposure time
-      - Frame exposure time in microseconds
-    * - __u32 Frame interval
-      - In microseconds = 1000000 / framerate
-    * - __u32 Pipe latency
-      - Time in microseconds from start of frame to data in USB buffer
-    * - :cspan:`1` *Configuration*
-    * - __u32 ID
-      - 0x80000002
-    * - __u32 Size
-      - Size in bytes (currently 40)
-    * - __u32 Version
-      - Version of this structure. The documentation herein corresponds to
-        version xxx. The version number will be incremented when new fields are
-        added.
-    * - __u32 Flags
-      - A bitmask of flags: see [4_] below
-    * - __u8 Hardware type
-      - Camera hardware version [5_]
-    * - __u8 SKU ID
-      - Camera hardware configuration [6_]
-    * - __u32 Cookie
-      - Internal synchronisation
-    * - __u16 Format
-      - Image format code [7_]
-    * - __u16 Width
-      - Width in pixels
-    * - __u16 Height
-      - Height in pixels
-    * - __u16 Framerate
-      - Requested frame rate per second
-    * - __u16 Trigger
-      - Byte 0: bit 0: depth and RGB are synchronised, bit 1: external trigger
-
-.. _1:
-
-[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/stream/uvc-extensions-1-5
-
-.. _2:
-
-[2] Depth Control flags specify which fields are valid: ::
-
-  0x00000001 Gain
-  0x00000002 Exposure
-  0x00000004 Laser power
-  0x00000008 AE mode
-  0x00000010 Exposure priority
-  0x00000020 AE ROI
-  0x00000040 Preset
-
-.. _3:
-
-[3] Capture Timing flags specify which fields are valid: ::
-
-  0x00000001 Frame counter
-  0x00000002 Optical time
-  0x00000004 Readout time
-  0x00000008 Exposure time
-  0x00000010 Frame interval
-  0x00000020 Pipe latency
-
-.. _4:
-
-[4] Configuration flags specify which fields are valid: ::
-
-  0x00000001 Hardware type
-  0x00000002 SKU ID
-  0x00000004 Cookie
-  0x00000008 Format
-  0x00000010 Width
-  0x00000020 Height
-  0x00000040 Framerate
-  0x00000080 Trigger
-  0x00000100 Cal count
-
-.. _5:
-
-[5] Camera model: ::
-
-  0 DS5
-  1 IVCAM2
-
-.. _6:
-
-[6] 8-bit camera hardware configuration bitfield: ::
-
-  [1:0] depthCamera
-	00: no depth
-	01: standard depth
-	10: wide depth
-	11: reserved
-  [2]   depthIsActive - has a laser projector
-  [3]   RGB presence
-  [4]   Inertial Measurement Unit (IMU) presence
-  [5]   projectorType
-	0: HPTG
-	1: Princeton
-  [6]   0: a projector, 1: an LED
-  [7]   reserved
-
-.. _7:
-
-[7] Image format codes per video streaming interface:
-
-Depth: ::
-
-  1 Z16
-  2 Z
-
-Left sensor: ::
-
-  1 Y8
-  2 UYVY
-  3 R8L8
-  4 Calibration
-  5 W10
-
-Fish Eye sensor: ::
-
-  1 RAW8
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst
deleted file mode 100644
index 84d81dd7a7b5e..0000000000000
--- a/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst
+++ /dev/null
@@ -1,81 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
-
-.. _v4l2-meta-fmt-params:
-.. _v4l2-meta-fmt-stat-3a:
-
-******************************************************************
-V4L2_META_FMT_IPU3_PARAMS ('ip3p'), V4L2_META_FMT_IPU3_3A ('ip3s')
-******************************************************************
-
-.. ipu3_uapi_stats_3a
-
-3A statistics
-=============
-
-The IPU3 ImgU 3A statistics accelerators collect different statistics over
-an input Bayer frame. Those statistics are obtained from the "ipu3-imgu [01] 3a
-stat" metadata capture video nodes, using the :c:type:`v4l2_meta_format`
-interface. They are formatted as described by the :c:type:`ipu3_uapi_stats_3a`
-structure.
-
-The statistics collected are AWB (Auto-white balance) RGBS (Red, Green, Blue and
-Saturation measure) cells, AWB filter response, AF (Auto-focus) filter response,
-and AE (Auto-exposure) histogram.
-
-The struct :c:type:`ipu3_uapi_4a_config` saves all configurable parameters.
-
-.. code-block:: c
-
-	struct ipu3_uapi_stats_3a {
-		struct ipu3_uapi_awb_raw_buffer awb_raw_buffer;
-		struct ipu3_uapi_ae_raw_buffer_aligned ae_raw_buffer[IPU3_UAPI_MAX_STRIPES];
-		struct ipu3_uapi_af_raw_buffer af_raw_buffer;
-		struct ipu3_uapi_awb_fr_raw_buffer awb_fr_raw_buffer;
-		struct ipu3_uapi_4a_config stats_4a_config;
-		__u32 ae_join_buffers;
-		__u8 padding[28];
-		struct ipu3_uapi_stats_3a_bubble_info_per_stripe stats_3a_bubble_per_stripe;
-		struct ipu3_uapi_ff_status stats_3a_status;
-	};
-
-.. ipu3_uapi_params
-
-Pipeline parameters
-===================
-
-The pipeline parameters are passed to the "ipu3-imgu [01] parameters" metadata
-output video nodes, using the :c:type:`v4l2_meta_format` interface. They are
-formatted as described by the :c:type:`ipu3_uapi_params` structure.
-
-Both 3A statistics and pipeline parameters described here are closely tied to
-the underlying camera sub-system (CSS) APIs. They are usually consumed and
-produced by dedicated user space libraries that comprise the important tuning
-tools, thus freeing the developers from being bothered with the low level
-hardware and algorithm details.
-
-.. code-block:: c
-
-	struct ipu3_uapi_params {
-		/* Flags which of the settings below are to be applied */
-		struct ipu3_uapi_flags use;
-
-		/* Accelerator cluster parameters */
-		struct ipu3_uapi_acc_param acc_param;
-
-		/* ISP vector address space parameters */
-		struct ipu3_uapi_isp_lin_vmem_params lin_vmem_params;
-		struct ipu3_uapi_isp_tnr3_vmem_params tnr3_vmem_params;
-		struct ipu3_uapi_isp_xnr3_vmem_params xnr3_vmem_params;
-
-		/* ISP data memory (DMEM) parameters */
-		struct ipu3_uapi_isp_tnr3_params tnr3_dmem_params;
-		struct ipu3_uapi_isp_xnr3_params xnr3_dmem_params;
-
-		/* Optical black level compensation */
-		struct ipu3_uapi_obgrid_param obgrid_param;
-	};
-
-Intel IPU3 ImgU uAPI data types
-===============================
-
-.. kernel-doc:: drivers/staging/media/ipu3/include/uapi/intel-ipu3.h
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst
deleted file mode 100644
index fa04f00bcd2ed..0000000000000
--- a/Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst
+++ /dev/null
@@ -1,50 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. _v4l2-meta-fmt-rk-isp1-params:
-
-.. _v4l2-meta-fmt-rk-isp1-stat-3a:
-
-*****************************************************************************
-V4L2_META_FMT_RK_ISP1_PARAMS ('rk1p'), V4L2_META_FMT_RK_ISP1_STAT_3A ('rk1s')
-*****************************************************************************
-
-Configuration parameters
-========================
-
-The configuration parameters are passed to the
-:ref:`rkisp1_params <rkisp1_params>` metadata output video node, using
-the :c:type:`v4l2_meta_format` interface. The buffer contains
-a single instance of the C structure :c:type:`rkisp1_params_cfg` defined in
-``rkisp1-config.h``. So the structure can be obtained from the buffer by:
-
-.. code-block:: c
-
-	struct rkisp1_params_cfg *params = (struct rkisp1_params_cfg*) buffer;
-
-.. rkisp1_stat_buffer
-
-3A and histogram statistics
-===========================
-
-The ISP1 device collects different statistics over an input Bayer frame.
-Those statistics are obtained from the :ref:`rkisp1_stats <rkisp1_stats>`
-metadata capture video node,
-using the :c:type:`v4l2_meta_format` interface. The buffer contains a single
-instance of the C structure :c:type:`rkisp1_stat_buffer` defined in
-``rkisp1-config.h``. So the structure can be obtained from the buffer by:
-
-.. code-block:: c
-
-	struct rkisp1_stat_buffer *stats = (struct rkisp1_stat_buffer*) buffer;
-
-The statistics collected are Exposure, AWB (Auto-white balance), Histogram and
-AF (Auto-focus). See :c:type:`rkisp1_stat_buffer` for details of the statistics.
-
-The 3A statistics and configuration parameters described here are usually
-consumed and produced by dedicated user space libraries that comprise the
-important tuning tools using software control loop.
-
-rkisp1 uAPI data types
-======================
-
-.. kernel-doc:: include/uapi/linux/rkisp1-config.h
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-uvc.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-uvc.rst
deleted file mode 100644
index 784346d14bbdb..0000000000000
--- a/Documentation/userspace-api/media/v4l/pixfmt-meta-uvc.rst
+++ /dev/null
@@ -1,51 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-
-.. _v4l2-meta-fmt-uvc:
-
-*******************************
-V4L2_META_FMT_UVC ('UVCH')
-*******************************
-
-UVC Payload Header Data
-
-
-Description
-===========
-
-This format describes standard UVC metadata, extracted from UVC packet headers
-and provided by the UVC driver through metadata video nodes. That data includes
-exact copies of the standard part of UVC Payload Header contents and auxiliary
-timing information, required for precise interpretation of timestamps, contained
-in those headers. See section "2.4.3.3 Video and Still Image Payload Headers" of
-the "UVC 1.5 Class specification" for details.
-
-Each UVC payload header can be between 2 and 12 bytes large. Buffers can
-contain multiple headers, if multiple such headers have been transmitted by the
-camera for the respective frame. However, the driver may drop headers when the
-buffer is full, when they contain no useful information (e.g. those without the
-SCR field or with that field identical to the previous header), or generally to
-perform rate limiting when the device sends a large number of headers.
-
-Each individual block contains the following fields:
-
-.. flat-table:: UVC Metadata Block
-    :widths: 1 4
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Field
-      - Description
-    * - __u64 ts;
-      - system timestamp in host byte order, measured by the driver upon
-        reception of the payload
-    * - __u16 sof;
-      - USB Frame Number in host byte order, also obtained by the driver as
-        close as possible to the above timestamp to enable correlation between
-        them
-    * - :cspan:`1` *The rest is an exact copy of the UVC payload header:*
-    * - __u8 length;
-      - length of the rest of the block, including this field
-    * - __u8 flags;
-      - Flags, indicating presence of other standard UVC fields
-    * - __u8 buf[];
-      - The rest of the header, possibly including UVC PTS and SCR fields
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-vivid.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-vivid.rst
deleted file mode 100644
index 7173e2c3e245c..0000000000000
--- a/Documentation/userspace-api/media/v4l/pixfmt-meta-vivid.rst
+++ /dev/null
@@ -1,36 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
-
-.. _v4l2-meta-fmt-vivid:
-
-*******************************
-V4L2_META_FMT_VIVID ('VIVD')
-*******************************
-
-VIVID Metadata Format
-
-
-Description
-===========
-
-This describes metadata format used by the vivid driver.
-
-It sets Brightness, Saturation, Contrast and Hue, each of which maps to
-corresponding controls of the vivid driver with respect to the range and default values.
-
-It contains the following fields:
-
-.. flat-table:: VIVID Metadata
-    :widths: 1 4
-    :header-rows:  1
-    :stub-columns: 0
-
-    * - Field
-      - Description
-    * - u16 brightness;
-      - Image brightness, the value is in the range 0 to 255, with the default value as 128.
-    * - u16 contrast;
-      - Image contrast, the value is in the range 0 to 255, with the default value as 128.
-    * - u16 saturation;
-      - Image color saturation, the value is in the range 0 to 255, with the default value as 128.
-    * - s16 hue;
-      - Image color balance, the value is in the range -128 to 128, with the default value as 0.
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgo.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgo.rst
deleted file mode 100644
index 8d886feb180ca..0000000000000
--- a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgo.rst
+++ /dev/null
@@ -1,168 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-
-.. _v4l2-meta-fmt-vsp1-hgo:
-
-*******************************
-V4L2_META_FMT_VSP1_HGO ('VSPH')
-*******************************
-
-Renesas R-Car VSP1 1-D Histogram Data
-
-
-Description
-===========
-
-This format describes histogram data generated by the Renesas R-Car VSP1 1-D
-Histogram (HGO) engine.
-
-The VSP1 HGO is a histogram computation engine that can operate on RGB, YCrCb
-or HSV data. It operates on a possibly cropped and subsampled input image and
-computes the minimum, maximum and sum of all pixels as well as per-channel
-histograms.
-
-The HGO can compute histograms independently per channel, on the maximum of the
-three channels (RGB data only) or on the Y channel only (YCbCr only). It can
-additionally output the histogram with 64 or 256 bins, resulting in four
-possible modes of operation.
-
-- In *64 bins normal mode*, the HGO operates on the three channels independently
-  to compute three 64-bins histograms. RGB, YCbCr and HSV image formats are
-  supported.
-- In *64 bins maximum mode*, the HGO operates on the maximum of the (R, G, B)
-  channels to compute a single 64-bins histogram. Only the RGB image format is
-  supported.
-- In *256 bins normal mode*, the HGO operates on the Y channel to compute a
-  single 256-bins histogram. Only the YCbCr image format is supported.
-- In *256 bins maximum mode*, the HGO operates on the maximum of the (R, G, B)
-  channels to compute a single 256-bins histogram. Only the RGB image format is
-  supported.
-
-**Byte Order.**
-All data is stored in memory in little endian format. Each cell in the tables
-contains one byte.
-
-.. flat-table:: VSP1 HGO Data - 64 Bins, Normal Mode (792 bytes)
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Offset
-      - :cspan:`4` Memory
-    * -
-      - [31:24]
-      - [23:16]
-      - [15:8]
-      - [7:0]
-    * - 0
-      -
-      - R/Cr/H max [7:0]
-      -
-      - R/Cr/H min [7:0]
-    * - 4
-      -
-      - G/Y/S max [7:0]
-      -
-      - G/Y/S min [7:0]
-    * - 8
-      -
-      - B/Cb/V max [7:0]
-      -
-      - B/Cb/V min [7:0]
-    * - 12
-      - :cspan:`4` R/Cr/H sum [31:0]
-    * - 16
-      - :cspan:`4` G/Y/S sum [31:0]
-    * - 20
-      - :cspan:`4` B/Cb/V sum [31:0]
-    * - 24
-      - :cspan:`4` R/Cr/H bin 0 [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 276
-      - :cspan:`4` R/Cr/H bin 63 [31:0]
-    * - 280
-      - :cspan:`4` G/Y/S bin 0 [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 532
-      - :cspan:`4` G/Y/S bin 63 [31:0]
-    * - 536
-      - :cspan:`4` B/Cb/V bin 0 [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 788
-      - :cspan:`4` B/Cb/V bin 63 [31:0]
-
-.. flat-table:: VSP1 HGO Data - 64 Bins, Max Mode (264 bytes)
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Offset
-      - :cspan:`4` Memory
-    * -
-      - [31:24]
-      - [23:16]
-      - [15:8]
-      - [7:0]
-    * - 0
-      -
-      - max(R,G,B) max [7:0]
-      -
-      - max(R,G,B) min [7:0]
-    * - 4
-      - :cspan:`4` max(R,G,B) sum [31:0]
-    * - 8
-      - :cspan:`4` max(R,G,B) bin 0 [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 260
-      - :cspan:`4` max(R,G,B) bin 63 [31:0]
-
-.. flat-table:: VSP1 HGO Data - 256 Bins, Normal Mode (1032 bytes)
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Offset
-      - :cspan:`4` Memory
-    * -
-      - [31:24]
-      - [23:16]
-      - [15:8]
-      - [7:0]
-    * - 0
-      -
-      - Y max [7:0]
-      -
-      - Y min [7:0]
-    * - 4
-      - :cspan:`4` Y sum [31:0]
-    * - 8
-      - :cspan:`4` Y bin 0 [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 1028
-      - :cspan:`4` Y bin 255 [31:0]
-
-.. flat-table:: VSP1 HGO Data - 256 Bins, Max Mode (1032 bytes)
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Offset
-      - :cspan:`4` Memory
-    * -
-      - [31:24]
-      - [23:16]
-      - [15:8]
-      - [7:0]
-    * - 0
-      -
-      - max(R,G,B) max [7:0]
-      -
-      - max(R,G,B) min [7:0]
-    * - 4
-      - :cspan:`4` max(R,G,B) sum [31:0]
-    * - 8
-      - :cspan:`4` max(R,G,B) bin 0 [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 1028
-      - :cspan:`4` max(R,G,B) bin 255 [31:0]
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgt.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgt.rst
deleted file mode 100644
index d8830ff605de4..0000000000000
--- a/Documentation/userspace-api/media/v4l/pixfmt-meta-vsp1-hgt.rst
+++ /dev/null
@@ -1,129 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-
-.. _v4l2-meta-fmt-vsp1-hgt:
-
-*******************************
-V4L2_META_FMT_VSP1_HGT ('VSPT')
-*******************************
-
-Renesas R-Car VSP1 2-D Histogram Data
-
-
-Description
-===========
-
-This format describes histogram data generated by the Renesas R-Car VSP1
-2-D Histogram (HGT) engine.
-
-The VSP1 HGT is a histogram computation engine that operates on HSV
-data. It operates on a possibly cropped and subsampled input image and
-computes the sum, maximum and minimum of the S component as well as a
-weighted frequency histogram based on the H and S components.
-
-The histogram is a matrix of 6 Hue and 32 Saturation buckets, 192 in
-total. Each HSV value is added to one or more buckets with a weight
-between 1 and 16 depending on the Hue areas configuration. Finding the
-corresponding buckets is done by inspecting the H and S value independently.
-
-The Saturation position **n** (0 - 31) of the bucket in the matrix is
-found by the expression:
-
-    n = S / 8
-
-The Hue position **m** (0 - 5) of the bucket in the matrix depends on
-how the HGT Hue areas are configured. There are 6 user configurable Hue
-Areas which can be configured to cover overlapping Hue values:
-
-.. raw:: latex
-
-    \small
-
-::
-
-         Area 0       Area 1       Area 2       Area 3       Area 4       Area 5
-        ________     ________     ________     ________     ________     ________
-   \   /|      |\   /|      |\   /|      |\   /|      |\   /|      |\   /|      |\   /
-    \ / |      | \ / |      | \ / |      | \ / |      | \ / |      | \ / |      | \ /
-     X  |      |  X  |      |  X  |      |  X  |      |  X  |      |  X  |      |  X
-    / \ |      | / \ |      | / \ |      | / \ |      | / \ |      | / \ |      | / \
-   /   \|      |/   \|      |/   \|      |/   \|      |/   \|      |/   \|      |/   \
-  5U   0L      0U   1L      1U   2L      2U   3L      3U   4L      4U   5L      5U   0L
-        <0..............................Hue Value............................255>
-
-
-.. raw:: latex
-
-    \normalsize
-
-When two consecutive areas don't overlap (n+1L is equal to nU) the boundary
-value is considered as part of the lower area.
-
-Pixels with a hue value included in the centre of an area (between nL and nU
-included) are attributed to that single area and given a weight of 16. Pixels
-with a hue value included in the overlapping region between two areas (between
-n+1L and nU excluded) are attributed to both areas and given a weight for each
-of these areas proportional to their position along the diagonal lines
-(rounded down).
-
-The Hue area setup must match one of the following constrains:
-
-::
-
-    0L <= 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U
-
-::
-
-    0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U <= 0L
-
-**Byte Order.**
-All data is stored in memory in little endian format. Each cell in the tables
-contains one byte.
-
-.. flat-table:: VSP1 HGT Data - (776 bytes)
-    :header-rows:  2
-    :stub-columns: 0
-
-    * - Offset
-      - :cspan:`4` Memory
-    * -
-      - [31:24]
-      - [23:16]
-      - [15:8]
-      - [7:0]
-    * - 0
-      - -
-      - S max [7:0]
-      - -
-      - S min [7:0]
-    * - 4
-      - :cspan:`4` S sum [31:0]
-    * - 8
-      - :cspan:`4` Histogram bucket (m=0, n=0) [31:0]
-    * - 12
-      - :cspan:`4` Histogram bucket (m=0, n=1) [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 132
-      - :cspan:`4` Histogram bucket (m=0, n=31) [31:0]
-    * - 136
-      - :cspan:`4` Histogram bucket (m=1, n=0) [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 264
-      - :cspan:`4` Histogram bucket (m=2, n=0) [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 392
-      - :cspan:`4` Histogram bucket (m=3, n=0) [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 520
-      - :cspan:`4` Histogram bucket (m=4, n=0) [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 648
-      - :cspan:`4` Histogram bucket (m=5, n=0) [31:0]
-    * -
-      - :cspan:`4` ...
-    * - 772
-      - :cspan:`4` Histogram bucket (m=5, n=31) [31:0]
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
index 72324274f20c9..1840224faa412 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
@@ -137,6 +137,13 @@ All components are stored with the same number of bits per component.
       - Cb, Cr
       - No
       - Linear
+    * - V4L2_PIX_FMT_NV15_4L4
+      - 'VT15'
+      - 15
+      - 4:2:0
+      - Cb, Cr
+      - Yes
+      - 4x4 tiles
     * - V4L2_PIX_FMT_NV16
       - 'NV16'
       - 8
@@ -378,6 +385,15 @@ two non-contiguous planes.
 
     Example V4L2_PIX_FMT_NV12MT memory layout of tiles
 
+.. _V4L2-PIX-FMT-NV15-4L4:
+
+Tiled NV15
+----------
+
+Semi-planar 10-bit YUV 4:2:0 formats, using 4x4 tiling.
+All components are packed without any padding between each other.
+As a side-effect, each group of 4 components are stored over 5 bytes
+(YYYY or UVUV = 4 * 10 bits = 40 bits = 5 bytes).
 
 .. _V4L2-PIX-FMT-NV16:
 .. _V4L2-PIX-FMT-NV61:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
index 5292d5e1a91f6..f9f73530a6be0 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
@@ -185,12 +185,12 @@ still cause this situation.
       - ``p_u32``
       - A pointer to a matrix control of unsigned 32-bit values. Valid if
 	this control is of type ``V4L2_CTRL_TYPE_U32``.
-    * - __u32 *
+    * - __s32 *
       - ``p_s32``
       - A pointer to a matrix control of signed 32-bit values. Valid if
         this control is of type ``V4L2_CTRL_TYPE_INTEGER`` and
         ``V4L2_CTRL_FLAG_HAS_PAYLOAD`` is set.
-    * - __u32 *
+    * - __s64 *
       - ``p_s64``
       - A pointer to a matrix control of signed 64-bit values. Valid if
         this control is of type ``V4L2_CTRL_TYPE_INTEGER64`` and
@@ -279,6 +279,22 @@ still cause this situation.
       - ``p_hevc_decode_params``
       - A pointer to a struct :c:type:`v4l2_ctrl_hevc_decode_params`. Valid if this
         control is of type ``V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS``.
+    * - struct :c:type:`v4l2_ctrl_av1_sequence` *
+      - ``p_av1_sequence``
+      - A pointer to a struct :c:type:`v4l2_ctrl_av1_sequence`. Valid if this control is
+        of type ``V4L2_CTRL_TYPE_AV1_SEQUENCE``.
+    * - struct :c:type:`v4l2_ctrl_av1_tile_group_entry` *
+      - ``p_av1_tile_group_entry``
+      - A pointer to a struct :c:type:`v4l2_ctrl_av1_tile_group_entry`. Valid if this control is
+        of type ``V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY``.
+    * - struct :c:type:`v4l2_ctrl_av1_frame` *
+      - ``p_av1_frame``
+      - A pointer to a struct :c:type:`v4l2_ctrl_av1_frame`. Valid if this control is
+        of type ``V4L2_CTRL_TYPE_AV1_FRAME``.
+    * - struct :c:type:`v4l2_ctrl_av1_film_grain` *
+      - ``p_av1_film_grain``
+      - A pointer to a struct :c:type:`v4l2_ctrl_av1_film_grain`. Valid if this control is
+        of type ``V4L2_CTRL_TYPE_AV1_FILM_GRAIN``.
     * - void *
       - ``ptr``
       - A pointer to a compound type which can be an N-dimensional array
diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
index a20dfa2a933b8..4d38acafe8e19 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
@@ -525,6 +525,30 @@ See also the examples in :ref:`control`.
       - n/a
       - A struct :c:type:`v4l2_ctrl_vp9_frame`, containing VP9
 	frame decode parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_AV1_SEQUENCE``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_av1_sequence`, containing AV1 Sequence OBU
+	decoding parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_av1_tile_group_entry`, containing AV1 Tile Group
+	OBU decoding parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_AV1_FRAME``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_av1_frame`, containing AV1 Frame/Frame
+	Header OBU decoding parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_AV1_FILM_GRAIN``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_av1_film_grain`, containing AV1 Film Grain
+        parameters for stateless video decoders.
 
 .. raw:: latex
 
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
index 68ca343c3b44a..2d6e3bbdd0404 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
@@ -122,7 +122,7 @@ for all the route entries and call ``VIDIOC_SUBDEV_G_ROUTING`` again.
     :widths:       3 1 4
 
     * - V4L2_SUBDEV_ROUTE_FL_ACTIVE
-      - 0
+      - 0x0001
       - The route is enabled. Set by applications.
 
 Return Value
diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
index 2a589d34b80ea..3e58aac4ef0b6 100644
--- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions
+++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
@@ -161,6 +161,10 @@ replace symbol V4L2_CTRL_TYPE_HEVC_PPS :c:type:`v4l2_ctrl_type`
 replace symbol V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS :c:type:`v4l2_ctrl_type`
 replace symbol V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX :c:type:`v4l2_ctrl_type`
 replace symbol V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_AV1_SEQUENCE :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_AV1_FRAME :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_AV1_FILM_GRAIN :c:type:`v4l2_ctrl_type`
 
 # V4L2 capability defines
 replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities
diff --git a/Documentation/userspace-api/netlink/intro-specs.rst b/Documentation/userspace-api/netlink/intro-specs.rst
index a3b847eafff71..bada89699455c 100644
--- a/Documentation/userspace-api/netlink/intro-specs.rst
+++ b/Documentation/userspace-api/netlink/intro-specs.rst
@@ -78,3 +78,82 @@ to see other examples.
 The code generation itself is performed by ``tools/net/ynl/ynl-gen-c.py``
 but it takes a few arguments so calling it directly for each file
 quickly becomes tedious.
+
+YNL lib
+=======
+
+``tools/net/ynl/lib/`` contains an implementation of a C library
+(based on libmnl) which integrates with code generated by
+``tools/net/ynl/ynl-gen-c.py`` to create easy to use netlink wrappers.
+
+YNL basics
+----------
+
+The YNL library consists of two parts - the generic code (functions
+prefix by ``ynl_``) and per-family auto-generated code (prefixed
+with the name of the family).
+
+To create a YNL socket call ynl_sock_create() passing the family
+struct (family structs are exported by the auto-generated code).
+ynl_sock_destroy() closes the socket.
+
+YNL requests
+------------
+
+Steps for issuing YNL requests are best explained on an example.
+All the functions and types in this example come from the auto-generated
+code (for the netdev family in this case):
+
+.. code-block:: c
+
+   // 0. Request and response pointers
+   struct netdev_dev_get_req *req;
+   struct netdev_dev_get_rsp *d;
+
+   // 1. Allocate a request
+   req = netdev_dev_get_req_alloc();
+   // 2. Set request parameters (as needed)
+   netdev_dev_get_req_set_ifindex(req, ifindex);
+
+   // 3. Issues the request
+   d = netdev_dev_get(ys, req);
+   // 4. Free the request arguments
+   netdev_dev_get_req_free(req);
+   // 5. Error check (the return value from step 3)
+   if (!d) {
+	// 6. Print the YNL-generated error
+	fprintf(stderr, "YNL: %s\n", ys->err.msg);
+        return -1;
+   }
+
+   // ... do stuff with the response @d
+
+   // 7. Free response
+   netdev_dev_get_rsp_free(d);
+
+YNL dumps
+---------
+
+Performing dumps follows similar pattern as requests.
+Dumps return a list of objects terminated by a special marker,
+or NULL on error. Use ``ynl_dump_foreach()`` to iterate over
+the result.
+
+YNL notifications
+-----------------
+
+YNL lib supports using the same socket for notifications and
+requests. In case notifications arrive during processing of a request
+they are queued internally and can be retrieved at a later time.
+
+To subscribed to notifications use ``ynl_subscribe()``.
+The notifications have to be read out from the socket,
+``ynl_socket_get_fd()`` returns the underlying socket fd which can
+be plugged into appropriate asynchronous IO API like ``poll``,
+or ``select``.
+
+Notifications can be retrieved using ``ynl_ntf_dequeue()`` and have
+to be freed using ``ynl_ntf_free()``. Since we don't know the notification
+type upfront the notifications are returned as ``struct ynl_ntf_base_type *``
+and user is expected to cast them to the appropriate full type based
+on the ``cmd`` member.
diff --git a/Documentation/virt/guest-halt-polling.rst b/Documentation/virt/guest-halt-polling.rst
index b4e747942417a..922291ddc40c6 100644
--- a/Documentation/virt/guest-halt-polling.rst
+++ b/Documentation/virt/guest-halt-polling.rst
@@ -72,7 +72,7 @@ high once achieves global guest_halt_poll_ns value).
 
 Default: Y
 
-The module parameters can be set from the debugfs files in::
+The module parameters can be set from the sysfs files in::
 
 	/sys/module/haltpoll/parameters/
 
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index add067793b90b..c0ddd3035462b 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -2613,7 +2613,7 @@ follows::
        this vcpu, and determines which register slices are visible through
        this ioctl interface.
 
-(See Documentation/arm64/sve.rst for an explanation of the "vq"
+(See Documentation/arch/arm64/sve.rst for an explanation of the "vq"
 nomenclature.)
 
 KVM_REG_ARM64_SVE_VLS is only accessible after KVM_ARM_VCPU_INIT.
@@ -8445,6 +8445,33 @@ structure.
 When getting the Modified Change Topology Report value, the attr->addr
 must point to a byte where the value will be stored or retrieved from.
 
+8.40 KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
+---------------------------------------
+
+:Capability: KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
+:Architectures: arm64
+:Type: vm
+:Parameters: arg[0] is the new split chunk size.
+:Returns: 0 on success, -EINVAL if any memslot was already created.
+
+This capability sets the chunk size used in Eager Page Splitting.
+
+Eager Page Splitting improves the performance of dirty-logging (used
+in live migrations) when guest memory is backed by huge-pages.  It
+avoids splitting huge-pages (into PAGE_SIZE pages) on fault, by doing
+it eagerly when enabling dirty logging (with the
+KVM_MEM_LOG_DIRTY_PAGES flag for a memory region), or when using
+KVM_CLEAR_DIRTY_LOG.
+
+The chunk size specifies how many pages to break at a time, using a
+single allocation for each chunk. Bigger the chunk size, more pages
+need to be allocated ahead of time.
+
+The chunk size needs to be a valid block size. The list of acceptable
+block sizes is exposed in KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES as a
+64-bit bitmap (each bit describing a block size). The default value is
+0, to disable the eager page splitting.
+
 9. Known KVM API problems
 =========================
 
diff --git a/Documentation/virt/kvm/halt-polling.rst b/Documentation/virt/kvm/halt-polling.rst
index 3fae39b1a5ba3..4f1a1b23d99cb 100644
--- a/Documentation/virt/kvm/halt-polling.rst
+++ b/Documentation/virt/kvm/halt-polling.rst
@@ -112,11 +112,11 @@ powerpc kvm-hv case.
 |			| function.		    |			      |
 +-----------------------+---------------------------+-------------------------+
 
-These module parameters can be set from the debugfs files in:
+These module parameters can be set from the sysfs files in:
 
 	/sys/module/kvm/parameters/
 
-Note: that these module parameters are system wide values and are not able to
+Note: these module parameters are system-wide values and are not able to
       be tuned on a per vm basis.
 
 Any changes to these parameters will be picked up by new and existing vCPUs the
@@ -142,12 +142,12 @@ Further Notes
   global max polling interval (halt_poll_ns) then the host will always poll for the
   entire block time and thus cpu utilisation will go to 100%.
 
-- Halt polling essentially presents a trade off between power usage and latency and
+- Halt polling essentially presents a trade-off between power usage and latency and
   the module parameters should be used to tune the affinity for this. Idle cpu time is
   essentially converted to host kernel time with the aim of decreasing latency when
   entering the guest.
 
 - Halt polling will only be conducted by the host when no other tasks are runnable on
   that cpu, otherwise the polling will cease immediately and schedule will be invoked to
-  allow that other task to run. Thus this doesn't allow a guest to denial of service the
-  cpu.
+  allow that other task to run. Thus this doesn't allow a guest to cause denial of service
+  of the cpu.
diff --git a/Documentation/virt/kvm/locking.rst b/Documentation/virt/kvm/locking.rst
index 8c77554e48963..3a034db5e55f8 100644
--- a/Documentation/virt/kvm/locking.rst
+++ b/Documentation/virt/kvm/locking.rst
@@ -67,7 +67,7 @@ following two cases:
 2. Write-Protection: The SPTE is present and the fault is caused by
    write-protect. That means we just need to change the W bit of the spte.
 
-What we use to avoid all the race is the Host-writable bit and MMU-writable bit
+What we use to avoid all the races is the Host-writable bit and MMU-writable bit
 on the spte:
 
 - Host-writable means the gfn is writable in the host kernel page tables and in
@@ -130,7 +130,7 @@ to gfn.  For indirect sp, we disabled fast page fault for simplicity.
 A solution for indirect sp could be to pin the gfn, for example via
 kvm_vcpu_gfn_to_pfn_atomic, before the cmpxchg.  After the pinning:
 
-- We have held the refcount of pfn that means the pfn can not be freed and
+- We have held the refcount of pfn; that means the pfn can not be freed and
   be reused for another gfn.
 - The pfn is writable and therefore it cannot be shared between different gfns
   by KSM.
@@ -186,22 +186,22 @@ writable between reading spte and updating spte. Like below case:
 The Dirty bit is lost in this case.
 
 In order to avoid this kind of issue, we always treat the spte as "volatile"
-if it can be updated out of mmu-lock, see spte_has_volatile_bits(), it means,
+if it can be updated out of mmu-lock [see spte_has_volatile_bits()]; it means
 the spte is always atomically updated in this case.
 
 3) flush tlbs due to spte updated
 
-If the spte is updated from writable to readonly, we should flush all TLBs,
+If the spte is updated from writable to read-only, we should flush all TLBs,
 otherwise rmap_write_protect will find a read-only spte, even though the
 writable spte might be cached on a CPU's TLB.
 
 As mentioned before, the spte can be updated to writable out of mmu-lock on
-fast page fault path, in order to easily audit the path, we see if TLBs need
-be flushed caused by this reason in mmu_spte_update() since this is a common
+fast page fault path. In order to easily audit the path, we see if TLBs needing
+to be flushed caused this reason in mmu_spte_update() since this is a common
 function to update spte (present -> present).
 
 Since the spte is "volatile" if it can be updated out of mmu-lock, we always
-atomically update the spte, the race caused by fast page fault can be avoided,
+atomically update the spte and the race caused by fast page fault can be avoided.
 See the comments in spte_has_volatile_bits() and mmu_spte_update().
 
 Lockless Access Tracking:
@@ -283,9 +283,9 @@ time it will be set using the Dirty tracking mechanism described above.
 :Arch:		x86
 :Protects:	wakeup_vcpus_on_cpu
 :Comment:	This is a per-CPU lock and it is used for VT-d posted-interrupts.
-		When VT-d posted-interrupts is supported and the VM has assigned
+		When VT-d posted-interrupts are supported and the VM has assigned
 		devices, we put the blocked vCPU on the list blocked_vcpu_on_cpu
-		protected by blocked_vcpu_on_cpu_lock, when VT-d hardware issues
+		protected by blocked_vcpu_on_cpu_lock. When VT-d hardware issues
 		wakeup notification event since external interrupts from the
 		assigned devices happens, we will find the vCPU on the list to
 		wakeup.
diff --git a/Documentation/virt/kvm/ppc-pv.rst b/Documentation/virt/kvm/ppc-pv.rst
index 5fdb907670be0..740d03d253003 100644
--- a/Documentation/virt/kvm/ppc-pv.rst
+++ b/Documentation/virt/kvm/ppc-pv.rst
@@ -89,7 +89,7 @@ also define a new hypercall feature to indicate that the host can give you more
 registers. Only if the host supports the additional features, make use of them.
 
 The magic page layout is described by struct kvm_vcpu_arch_shared
-in arch/powerpc/include/asm/kvm_para.h.
+in arch/powerpc/include/uapi/asm/kvm_para.h.
 
 Magic page features
 ===================
@@ -112,7 +112,7 @@ Magic page flags
 ================
 
 In addition to features that indicate whether a host is capable of a particular
-feature we also have a channel for a guest to tell the guest whether it's capable
+feature we also have a channel for a guest to tell the host whether it's capable
 of something. This is what we call "flags".
 
 Flags are passed to the host in the low 12 bits of the Effective Address.
@@ -139,7 +139,7 @@ Patched instructions
 ====================
 
 The "ld" and "std" instructions are transformed to "lwz" and "stw" instructions
-respectively on 32 bit systems with an added offset of 4 to accommodate for big
+respectively on 32-bit systems with an added offset of 4 to accommodate for big
 endianness.
 
 The following is a list of mapping the Linux kernel performs when running as
@@ -210,7 +210,7 @@ available on all targets.
 2) PAPR hypercalls
 
 PAPR hypercalls are needed to run server PowerPC PAPR guests (-M pseries in QEMU).
-These are the same hypercalls that pHyp, the POWER hypervisor implements. Some of
+These are the same hypercalls that pHyp, the POWER hypervisor, implements. Some of
 them are handled in the kernel, some are handled in user space. This is only
 available on book3s_64.
 
diff --git a/Documentation/virt/kvm/vcpu-requests.rst b/Documentation/virt/kvm/vcpu-requests.rst
index 87f04c1fa53d1..06718b9bc9597 100644
--- a/Documentation/virt/kvm/vcpu-requests.rst
+++ b/Documentation/virt/kvm/vcpu-requests.rst
@@ -101,7 +101,7 @@ also be used, e.g. ::
 
 However, VCPU request users should refrain from doing so, as it would
 break the abstraction.  The first 8 bits are reserved for architecture
-independent requests, all additional bits are available for architecture
+independent requests; all additional bits are available for architecture
 dependent requests.
 
 Architecture Independent Requests
@@ -151,8 +151,8 @@ KVM_REQUEST_NO_WAKEUP
 
   This flag is applied to requests that only need immediate attention
   from VCPUs running in guest mode.  That is, sleeping VCPUs do not need
-  to be awaken for these requests.  Sleeping VCPUs will handle the
-  requests when they are awaken later for some other reason.
+  to be awakened for these requests.  Sleeping VCPUs will handle the
+  requests when they are awakened later for some other reason.
 
 KVM_REQUEST_WAIT
 
diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst
index 487b6328b3e70..995780088eb23 100644
--- a/Documentation/virt/kvm/x86/amd-memory-encryption.rst
+++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst
@@ -57,7 +57,7 @@ information, see the SEV Key Management spec [api-spec]_
 
 The main ioctl to access SEV is KVM_MEMORY_ENCRYPT_OP.  If the argument
 to KVM_MEMORY_ENCRYPT_OP is NULL, the ioctl returns 0 if SEV is enabled
-and ``ENOTTY` if it is disabled (on some older versions of Linux,
+and ``ENOTTY`` if it is disabled (on some older versions of Linux,
 the ioctl runs normally even with a NULL argument, and therefore will
 likely return ``EFAULT``).  If non-NULL, the argument to KVM_MEMORY_ENCRYPT_OP
 must be a struct kvm_sev_cmd::
diff --git a/Documentation/virt/kvm/x86/mmu.rst b/Documentation/virt/kvm/x86/mmu.rst
index 8364afa228ecb..26f62034b6f3e 100644
--- a/Documentation/virt/kvm/x86/mmu.rst
+++ b/Documentation/virt/kvm/x86/mmu.rst
@@ -205,7 +205,7 @@ Shadow pages contain the following information:
   role.passthrough:
     The page is not backed by a guest page table, but its first entry
     points to one.  This is set if NPT uses 5-level page tables (host
-    CR4.LA57=1) and is shadowing L1's 4-level NPT (L1 CR4.LA57=1).
+    CR4.LA57=1) and is shadowing L1's 4-level NPT (L1 CR4.LA57=0).
   gfn:
     Either the guest page table containing the translations shadowed by this
     page, or the base page frame for linear translations.  See role.direct.
diff --git a/Documentation/virt/paravirt_ops.rst b/Documentation/virt/paravirt_ops.rst
index 6b789d27cead4..62d867e0d4d63 100644
--- a/Documentation/virt/paravirt_ops.rst
+++ b/Documentation/virt/paravirt_ops.rst
@@ -5,31 +5,31 @@ Paravirt_ops
 ============
 
 Linux provides support for different hypervisor virtualization technologies.
-Historically different binary kernels would be required in order to support
-different hypervisors, this restriction was removed with pv_ops.
+Historically, different binary kernels would be required in order to support
+different hypervisors; this restriction was removed with pv_ops.
 Linux pv_ops is a virtualization API which enables support for different
 hypervisors. It allows each hypervisor to override critical operations and
 allows a single kernel binary to run on all supported execution environments
 including native machine -- without any hypervisors.
 
 pv_ops provides a set of function pointers which represent operations
-corresponding to low level critical instructions and high level
-functionalities in various areas. pv-ops allows for optimizations at run
-time by enabling binary patching of the low-ops critical operations
+corresponding to low-level critical instructions and high-level
+functionalities in various areas. pv_ops allows for optimizations at run
+time by enabling binary patching of the low-level critical operations
 at boot time.
 
 pv_ops operations are classified into three categories:
 
 - simple indirect call
-   These operations correspond to high level functionality where it is
+   These operations correspond to high-level functionality where it is
    known that the overhead of indirect call isn't very important.
 
 - indirect call which allows optimization with binary patch
-   Usually these operations correspond to low level critical instructions. They
+   Usually these operations correspond to low-level critical instructions. They
    are called frequently and are performance critical. The overhead is
    very important.
 
 - a set of macros for hand written assembly code
    Hand written assembly codes (.S files) also need paravirtualization
-   because they include sensitive instructions or some of code paths in
+   because they include sensitive instructions or some code paths in
    them are very performance critical.
diff --git a/Documentation/wmi/acpi-interface.rst b/Documentation/wmi/acpi-interface.rst
new file mode 100644
index 0000000000000..d31af0ed9c083
--- /dev/null
+++ b/Documentation/wmi/acpi-interface.rst
@@ -0,0 +1,96 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+==================
+ACPI WMI interface
+==================
+
+The ACPI WMI interface is a proprietary extension of the ACPI specification made
+by Microsoft to allow hardware vendors to embed WMI (Windows Management Instrumentation)
+objects inside their ACPI firmware. Typical functions implemented over ACPI WMI
+are hotkey events on modern notebooks and configuration of BIOS options.
+
+PNP0C14 ACPI device
+-------------------
+
+Discovery of WMI objects is handled by defining ACPI devices with a PNP ID
+of ``PNP0C14``. These devices will contain a set of ACPI buffers and methods
+used for mapping and execution of WMI methods and/or queries. If there exist
+multiple of such devices, then each device is required to have a
+unique ACPI UID.
+
+_WDG buffer
+-----------
+
+The ``_WDG`` buffer is used to discover WMI objects and is required to be
+static. Its internal structure consists of data blocks with a size of 20 bytes,
+containing the following data:
+
+======= =============== =====================================================
+Offset  Size (in bytes) Content
+======= =============== =====================================================
+0x00    16              128 bit Variant 2 object GUID.
+0x10    2               2 character method ID or single byte notification ID.
+0x12    1               Object instance count.
+0x13    1               Object flags.
+======= =============== =====================================================
+
+The WMI object flags control whether the method or notification ID is used:
+
+- 0x1: Data block usage is expensive and must be explicitly enabled/disabled.
+- 0x2: Data block contains WMI methods.
+- 0x4: Data block contains ASCIZ string.
+- 0x8: Data block describes a WMI event, use notification ID instead
+  of method ID.
+
+Each WMI object GUID can appear multiple times inside a system.
+The method/notification ID is used to construct the ACPI method names used for
+interacting with the WMI object.
+
+WQxx ACPI methods
+-----------------
+
+If a data block does not contain WMI methods, then its content can be retrieved
+by this required ACPI method. The last two characters of the ACPI method name
+are the method ID of the data block to query. Their single parameter is an
+integer describing the instance which should be queried. This parameter can be
+omitted if the data block contains only a single instance.
+
+WSxx ACPI methods
+-----------------
+
+Similar to the ``WQxx`` ACPI methods, except that it is optional and takes an
+additional buffer as its second argument. The instance argument also cannot
+be omitted.
+
+WMxx ACPI methods
+-----------------
+
+Used for executing WMI methods associated with a data block. The last two
+characters of the ACPI method name are the method ID of the data block
+containing the WMI methods. Their first parameter is a integer describing the
+instance which methods should be executed. The second parameter is an integer
+describing the WMI method ID to execute, and the third parameter is a buffer
+containing the WMI method parameters. If the data block is marked as containing
+an ASCIZ string, then this buffer should contain an ASCIZ string. The ACPI
+method will return the result of the executed WMI method.
+
+WExx ACPI methods
+-----------------
+
+Used for optionally enabling/disabling WMI events, the last two characters of
+the ACPI method are the notification ID of the data block describing the WMI
+event as hexadecimal value. Their first parameter is an integer with a value
+of 0 if the WMI event should be disabled, other values will enable
+the WMI event.
+
+WCxx ACPI methods
+-----------------
+Similar to the ``WExx`` ACPI methods, except that it controls data collection
+instead of events and thus the last two characters of the ACPI method name are
+the method ID of the data block to enable/disable.
+
+_WED ACPI method
+----------------
+
+Used to retrieve additional WMI event data, its single parameter is a integer
+holding the notification ID of the event.
diff --git a/Documentation/wmi/devices/dell-wmi-ddv.rst b/Documentation/wmi/devices/dell-wmi-ddv.rst
new file mode 100644
index 0000000000000..bf963d91dd55b
--- /dev/null
+++ b/Documentation/wmi/devices/dell-wmi-ddv.rst
@@ -0,0 +1,297 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+============================================
+Dell DDV WMI interface driver (dell-wmi-ddv)
+============================================
+
+Introduction
+============
+
+Many Dell notebooks made after ~2020 support a WMI-based interface for
+retrieving various system data like battery temperature, ePPID, diagostic data
+and fan/thermal sensor data.
+
+This interface is likely used by the `Dell Data Vault` software on Windows,
+so it was called `DDV`. Currently the ``dell-wmi-ddv`` driver supports
+version 2 and 3 of the interface, with support for new interface versions
+easily added.
+
+.. warning:: The interface is regarded as internal by Dell, so no vendor
+             documentation is available. All knowledge was thus obtained by
+             trial-and-error, please keep that in mind.
+
+Dell ePPID (electronic Piece Part Identification)
+=================================================
+
+The Dell ePPID is used to uniquely identify components in Dell machines,
+including batteries. It has a form similar to `CC-PPPPPP-MMMMM-YMD-SSSS-FFF`
+and contains the following information:
+
+* Country code of origin (CC).
+* Part number with the first character being a filling number (PPPPPP).
+* Manufacture Identification (MMMMM).
+* Manufacturing Year/Month/Date (YMD) in base 36, with Y being the last digit
+  of the year.
+* Manufacture Sequence Number (SSSS).
+* Optional Firmware Version/Revision (FFF).
+
+The `eppidtool <https://pypi.org/project/eppidtool>`_ python utility can be used
+to decode and display this information.
+
+All information regarding the Dell ePPID was gathered using Dell support
+documentation and `this website <https://telcontar.net/KBK/Dell/date_codes>`_.
+
+WMI interface description
+=========================
+
+The WMI interface description can be decoded from the embedded binary MOF (bmof)
+data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility:
+
+::
+
+ [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("WMI Function"), guid("{8A42EA14-4F2A-FD45-6422-0087F7A7E608}")]
+ class DDVWmiMethodFunction {
+   [key, read] string InstanceName;
+   [read] boolean Active;
+
+   [WmiMethodId(1), Implemented, read, write, Description("Return Battery Design Capacity.")] void BatteryDesignCapacity([in] uint32 arg2, [out] uint32 argr);
+   [WmiMethodId(2), Implemented, read, write, Description("Return Battery Full Charge Capacity.")] void BatteryFullChargeCapacity([in] uint32 arg2, [out] uint32 argr);
+   [WmiMethodId(3), Implemented, read, write, Description("Return Battery Manufacture Name.")] void BatteryManufactureName([in] uint32 arg2, [out] string argr);
+   [WmiMethodId(4), Implemented, read, write, Description("Return Battery Manufacture Date.")] void BatteryManufactureDate([in] uint32 arg2, [out] uint32 argr);
+   [WmiMethodId(5), Implemented, read, write, Description("Return Battery Serial Number.")] void BatterySerialNumber([in] uint32 arg2, [out] uint32 argr);
+   [WmiMethodId(6), Implemented, read, write, Description("Return Battery Chemistry Value.")] void BatteryChemistryValue([in] uint32 arg2, [out] string argr);
+   [WmiMethodId(7), Implemented, read, write, Description("Return Battery Temperature.")] void BatteryTemperature([in] uint32 arg2, [out] uint32 argr);
+   [WmiMethodId(8), Implemented, read, write, Description("Return Battery Current.")] void BatteryCurrent([in] uint32 arg2, [out] uint32 argr);
+   [WmiMethodId(9), Implemented, read, write, Description("Return Battery Voltage.")] void BatteryVoltage([in] uint32 arg2, [out] uint32 argr);
+   [WmiMethodId(10), Implemented, read, write, Description("Return Battery Manufacture Access(MA code).")] void BatteryManufactureAceess([in] uint32 arg2, [out] uint32 argr);
+   [WmiMethodId(11), Implemented, read, write, Description("Return Battery Relative State-Of-Charge.")] void BatteryRelativeStateOfCharge([in] uint32 arg2, [out] uint32 argr);
+   [WmiMethodId(12), Implemented, read, write, Description("Return Battery Cycle Count")] void BatteryCycleCount([in] uint32 arg2, [out] uint32 argr);
+   [WmiMethodId(13), Implemented, read, write, Description("Return Battery ePPID")] void BatteryePPID([in] uint32 arg2, [out] string argr);
+   [WmiMethodId(14), Implemented, read, write, Description("Return Battery Raw Analytics Start")] void BatteryeRawAnalyticsStart([in] uint32 arg2, [out] uint32 argr);
+   [WmiMethodId(15), Implemented, read, write, Description("Return Battery Raw Analytics")] void BatteryeRawAnalytics([in] uint32 arg2, [out] uint32 RawSize, [out, WmiSizeIs("RawSize") : ToInstance] uint8 RawData[]);
+   [WmiMethodId(16), Implemented, read, write, Description("Return Battery Design Voltage.")] void BatteryDesignVoltage([in] uint32 arg2, [out] uint32 argr);
+   [WmiMethodId(17), Implemented, read, write, Description("Return Battery Raw Analytics A Block")] void BatteryeRawAnalyticsABlock([in] uint32 arg2, [out] uint32 RawSize, [out, WmiSizeIs("RawSize") : ToInstance] uint8 RawData[]);
+   [WmiMethodId(18), Implemented, read, write, Description("Return Version.")] void ReturnVersion([in] uint32 arg2, [out] uint32 argr);
+   [WmiMethodId(32), Implemented, read, write, Description("Return Fan Sensor Information")] void FanSensorInformation([in] uint32 arg2, [out] uint32 RawSize, [out, WmiSizeIs("RawSize") : ToInstance] uint8 RawData[]);
+   [WmiMethodId(34), Implemented, read, write, Description("Return Thermal Sensor Information")] void ThermalSensorInformation([in] uint32 arg2, [out] uint32 RawSize, [out, WmiSizeIs("RawSize") : ToInstance] uint8 RawData[]);
+ };
+
+Each WMI method takes an ACPI buffer containing a 32-bit index as input argument,
+with the first 8 bit being used to specify the battery when using battery-related
+WMI methods. Other WMI methods may ignore this argument or interpret it
+differently. The WMI method output format varies:
+
+* if the function has only a single output, then an ACPI object
+  of the corresponding type is returned
+* if the function has multiple outputs, when an ACPI package
+  containing the outputs in the same order is returned
+
+The format of the output should be thoroughly checked, since many methods can
+return malformed data in case of an error.
+
+The data format of many battery-related methods seems to be based on the
+`Smart Battery Data Specification`, so unknown battery-related methods are
+likely to follow this standard in some way.
+
+WMI method GetBatteryDesignCapacity()
+-------------------------------------
+
+Returns the design capacity of the battery in mAh as an u16.
+
+WMI method BatteryFullCharge()
+------------------------------
+
+Returns the full charge capacity of the battery in mAh as an u16.
+
+WMI method BatteryManufactureName()
+-----------------------------------
+
+Returns the manufacture name of the battery as an ASCII string.
+
+WMI method BatteryManufactureDate()
+-----------------------------------
+
+Returns the manufacture date of the battery as an u16.
+The date is encoded in the following manner:
+
+- bits 0 to 4 contain the manufacture day.
+- bits 5 to 8 contain the manufacture month.
+- bits 9 to 15 contain the manufacture year biased by 1980.
+
+.. note::
+   The data format needs to be verified on more machines.
+
+WMI method BatterySerialNumber()
+--------------------------------
+
+Returns the serial number of the battery as an u16.
+
+WMI method BatteryChemistryValue()
+----------------------------------
+
+Returns the chemistry of the battery as an ASCII string.
+Known values are:
+
+- "Li-I" for Li-Ion
+
+WMI method BatteryTemperature()
+-------------------------------
+
+Returns the temperature of the battery in tenth degree kelvin as an u16.
+
+WMI method BatteryCurrent()
+---------------------------
+
+Returns the current flow of the battery in mA as an s16.
+Negative values indicate discharging.
+
+WMI method BatteryVoltage()
+---------------------------
+
+Returns the voltage flow of the battery in mV as an u16.
+
+WMI method BatteryManufactureAccess()
+-------------------------------------
+
+Returns a manufacture-defined value as an u16.
+
+WMI method BatteryRelativeStateOfCharge()
+-----------------------------------------
+
+Returns the capacity of the battery in percent as an u16.
+
+WMI method BatteryCycleCount()
+------------------------------
+
+Returns the cycle count of the battery as an u16.
+
+WMI method BatteryePPID()
+-------------------------
+
+Returns the ePPID of the battery as an ASCII string.
+
+WMI method BatteryeRawAnalyticsStart()
+--------------------------------------
+
+Performs an analysis of the battery and returns a status code:
+
+- ``0x0``: Success
+- ``0x1``: Interface not supported
+- ``0xfffffffe``: Error/Timeout
+
+.. note::
+   The meaning of this method is still largely unknown.
+
+WMI method BatteryeRawAnalytics()
+---------------------------------
+
+Returns a buffer usually containg 12 blocks of analytics data.
+Those blocks contain:
+
+- a block number starting with 0 (u8)
+- 31 bytes of unknown data
+
+.. note::
+   The meaning of this method is still largely unknown.
+
+WMI method BatteryDesignVoltage()
+---------------------------------
+
+Returns the design voltage of the battery in mV as an u16.
+
+WMI method BatteryeRawAnalyticsABlock()
+---------------------------------------
+
+Returns a single block of analytics data, with the second byte
+of the index being used for selecting the block number.
+
+*Supported since WMI interface version 3!*
+
+.. note::
+   The meaning of this method is still largely unknown.
+
+WMI method ReturnVersion()
+--------------------------
+
+Returns the WMI interface version as an u32.
+
+WMI method FanSensorInformation()
+---------------------------------
+
+Returns a buffer containg fan sensor entries, terminated
+with a single ``0xff``.
+Those entries contain:
+
+- fan type (u8)
+- fan speed in RPM (little endian u16)
+
+WMI method ThermalSensorInformation()
+-------------------------------------
+
+Returns a buffer containing thermal sensor entries, terminated
+with a single ``0xff``.
+Those entries contain:
+
+- thermal type (u8)
+- current temperature (s8)
+- min. temperature (s8)
+- max. temperature (s8)
+- unknown field (u8)
+
+.. note::
+   TODO: Find out what the meaning of the last byte is.
+
+ACPI battery matching algorithm
+===============================
+
+The algorithm used to match ACPI batteries to indices is based on information
+which was found inside the logging messages of the OEM software.
+
+Basically for each new ACPI battery, the serial numbers of the batteries behind
+indices 1 till 3 are compared with the serial number of the ACPI battery.
+Since the serial number of the ACPI battery can either be encoded as a normal
+integer or as a hexadecimal value, both cases need to be checked. The first
+index with a matching serial number is then selected.
+
+A serial number of 0 indicates that the corresponding index is not associated
+with an actual battery, or that the associated battery is not present.
+
+Some machines like the Dell Inspiron 3505 only support a single battery and thus
+ignore the battery index. Because of this the driver depends on the ACPI battery
+hook mechanism to discover batteries.
+
+.. note::
+   The ACPI battery matching algorithm currently used inside the driver is
+   outdated and does not match the algorithm described above. The reasons for
+   this are differences in the handling of the ToHexString() ACPI opcode between
+   Linux and Windows, which distorts the serial number of ACPI batteries on many
+   machines. Until this issue is resolved, the driver cannot use the above
+   algorithm.
+
+Reverse-Engineering the DDV WMI interface
+=========================================
+
+1. Find a supported Dell notebook, usually made after ~2020.
+2. Dump the ACPI tables and search for the WMI device (usually called "ADDV").
+3. Decode the corresponding bmof data and look at the ASL code.
+4. Try to deduce the meaning of a certain WMI method by comparing the control
+   flow with other ACPI methods (_BIX or _BIF for battery related methods
+   for example).
+5. Use the built-in UEFI diagostics to view sensor types/values for fan/thermal
+   related methods (sometimes overwriting static ACPI data fields can be used
+   to test different sensor type values, since on some machines this data is
+   not reinitialized upon a warm reset).
+
+Alternatively:
+
+1. Load the ``dell-wmi-ddv`` driver, use the ``force`` module param
+   if necessary.
+2. Use the debugfs interface to access the raw fan/thermal sensor buffer data.
+3. Compare the data with the built-in UEFI diagnostics.
+
+In case the DDV WMI interface version available on your Dell notebook is not
+supported or you are seeing unknown fan/thermal sensors, please submit a
+bugreport on `bugzilla <https://bugzilla.kernel.org>`_ so they can be added
+to the ``dell-wmi-ddv`` driver.
+
+See Documentation/admin-guide/reporting-issues.rst for further information.
diff --git a/Documentation/wmi/devices/index.rst b/Documentation/wmi/devices/index.rst
new file mode 100644
index 0000000000000..c08735a9d7df3
--- /dev/null
+++ b/Documentation/wmi/devices/index.rst
@@ -0,0 +1,22 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+=============================
+Driver-specific Documentation
+=============================
+
+This section provides information about various devices supported by
+the Linux kernel, their protocols and driver details.
+
+.. toctree::
+   :maxdepth: 1
+   :numbered:
+   :glob:
+
+   *
+
+.. only:: subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/wmi/devices/wmi-bmof.rst b/Documentation/wmi/devices/wmi-bmof.rst
new file mode 100644
index 0000000000000..ca1ee9a29be3b
--- /dev/null
+++ b/Documentation/wmi/devices/wmi-bmof.rst
@@ -0,0 +1,25 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+==============================
+WMI embedded Binary MOF driver
+==============================
+
+Introduction
+============
+
+Many machines embed WMI Binary MOF (Managed Object Format) metadata used to
+describe the details of their ACPI WMI interfaces. The data can be decoded
+with tools like `bmfdec <https://github.com/pali/bmfdec>`_ to obtain a
+human readable WMI interface description, which is useful for developing
+new WMI drivers.
+
+The Binary MOF data can be retrieved from the ``bmof`` sysfs attribute of the
+associated WMI device. Please note that multiple WMI devices containing Binary
+MOF data can exist on a given system.
+
+WMI interface
+=============
+
+The Binary MOF WMI device is identified by the WMI GUID ``05901221-D566-11D1-B2F0-00A0C9062910``.
+The Binary MOF can be obtained by doing a WMI data block query. The result is
+then returned as an ACPI buffer with a variable size.
diff --git a/Documentation/wmi/index.rst b/Documentation/wmi/index.rst
new file mode 100644
index 0000000000000..537cff188e14c
--- /dev/null
+++ b/Documentation/wmi/index.rst
@@ -0,0 +1,19 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+=============
+WMI Subsystem
+=============
+
+.. toctree::
+   :maxdepth: 1
+
+   acpi-interface
+   devices/index
+
+.. only::  subproject and html
+
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/MAINTAINERS b/MAINTAINERS
index 35e19594640d0..d590ce31aa726 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1,81 +1,5 @@
-List of maintainers and how to submit kernel changes
-====================================================
-
-Please try to follow the guidelines below.  This will make things
-easier on the maintainers.  Not all of these guidelines matter for every
-trivial patch so apply some common sense.
-
-Tips for patch submitters
--------------------------
-
-1.	Always *test* your changes, however small, on at least 4 or
-	5 people, preferably many more.
-
-2.	Try to release a few ALPHA test versions to the net. Announce
-	them onto the kernel channel and await results. This is especially
-	important for device drivers, because often that's the only way
-	you will find things like the fact version 3 firmware needs
-	a magic fix you didn't know about, or some clown changed the
-	chips on a board and not its name.  (Don't laugh!  Look at the
-	SMC etherpower for that.)
-
-3.	Make sure your changes compile correctly in multiple
-	configurations. In particular check that changes work both as a
-	module and built into the kernel.
-
-4.	When you are happy with a change make it generally available for
-	testing and await feedback.
-
-5.	Make a patch available to the relevant maintainer in the list. Use
-	``diff -u`` to make the patch easy to merge. Be prepared to get your
-	changes sent back with seemingly silly requests about formatting
-	and variable names.  These aren't as silly as they seem. One
-	job the maintainers (and especially Linus) do is to keep things
-	looking the same. Sometimes this means that the clever hack in
-	your driver to get around a problem actually needs to become a
-	generalized kernel feature ready for next time.
-
-	PLEASE check your patch with the automated style checker
-	(scripts/checkpatch.pl) to catch trivial style violations.
-	See Documentation/process/coding-style.rst for guidance here.
-
-	PLEASE CC: the maintainers and mailing lists that are generated
-	by ``scripts/get_maintainer.pl.`` The results returned by the
-	script will be best if you have git installed and are making
-	your changes in a branch derived from Linus' latest git tree.
-	See Documentation/process/submitting-patches.rst for details.
-
-	PLEASE try to include any credit lines you want added with the
-	patch. It avoids people being missed off by mistake and makes
-	it easier to know who wants adding and who doesn't.
-
-	PLEASE document known bugs. If it doesn't work for everything
-	or does something very odd once a month document it.
-
-	PLEASE remember that submissions must be made under the terms
-	of the Linux Foundation certificate of contribution and should
-	include a Signed-off-by: line.  The current version of this
-	"Developer's Certificate of Origin" (DCO) is listed in the file
-	Documentation/process/submitting-patches.rst.
-
-6.	Make sure you have the right to send any changes you make. If you
-	do changes at work you may find your employer owns the patch
-	not you.
-
-7.	When sending security related changes or reports to a maintainer
-	please Cc: security@kernel.org, especially if the maintainer
-	does not respond. Please keep in mind that the security team is
-	a small set of people who can be efficient only when working on
-	verified bugs. Please only Cc: this list when you have identified
-	that the bug would present a short-term risk to other users if it
-	were publicly disclosed. For example, reports of address leaks do
-	not represent an immediate threat and are better handled publicly,
-	and ideally, should come with a patch proposal. Please do not send
-	automated reports to this list either. Such bugs will be handled
-	better and faster in the usual public places. See
-	Documentation/process/security-bugs.rst for details.
-
-8.	Happy hacking.
+List of maintainers
+===================
 
 Descriptions of section entries and preferred order
 ---------------------------------------------------
@@ -406,6 +330,13 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/acpi/arm64
 
+ACPI FOR RISC-V (ACPI/riscv)
+M:	Sunil V L <sunilvl@ventanamicro.com>
+L:	linux-acpi@vger.kernel.org
+L:	linux-riscv@lists.infradead.org
+S:	Maintained
+F:	drivers/acpi/riscv/
+
 ACPI PCC(Platform Communication Channel) MAILBOX DRIVER
 M:	Sudeep Holla <sudeep.holla@arm.com>
 L:	linux-acpi@vger.kernel.org
@@ -449,6 +380,8 @@ F:	include/linux/acpi_viot.h
 ACPI WMI DRIVER
 L:	platform-driver-x86@vger.kernel.org
 S:	Orphan
+F:	Documentation/driver-api/wmi.rst
+F:	Documentation/wmi/
 F:	drivers/platform/x86/wmi.c
 F:	include/uapi/linux/wmi.h
 
@@ -909,13 +842,6 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/altera/
 
-ALTERA TSE PCS
-M:	Maxime Chevallier <maxime.chevallier@bootlin.com>
-L:	netdev@vger.kernel.org
-S:	Supported
-F:	drivers/net/pcs/pcs-altera-tse.c
-F:	include/linux/pcs-altera-tse.h
-
 ALTERA UART/JTAG UART SERIAL DRIVERS
 M:	Tobias Klauser <tklauser@distanz.ch>
 L:	linux-serial@vger.kernel.org
@@ -1634,6 +1560,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 C:	irc://irc.libera.chat/armlinux
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
+F:	Documentation/process/maintainer-soc.rst
 F:	arch/arm/boot/dts/Makefile
 F:	arch/arm64/boot/dts/Makefile
 
@@ -1665,9 +1592,9 @@ F:	Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
 F:	Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
 F:	Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
 F:	Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
-F:	arch/arm/boot/dts/arm-realview-*
-F:	arch/arm/boot/dts/integrator*
-F:	arch/arm/boot/dts/versatile*
+F:	arch/arm/boot/dts/arm/arm-realview-*
+F:	arch/arm/boot/dts/arm/integrator*
+F:	arch/arm/boot/dts/arm/versatile*
 F:	arch/arm/mach-versatile/
 F:	drivers/bus/arm-integrator-lm.c
 F:	drivers/clk/versatile/
@@ -1838,7 +1765,7 @@ F:	Documentation/devicetree/bindings/net/actions,owl-emac.yaml
 F:	Documentation/devicetree/bindings/pinctrl/actions,*
 F:	Documentation/devicetree/bindings/power/actions,owl-sps.txt
 F:	Documentation/devicetree/bindings/timer/actions,owl-timer.txt
-F:	arch/arm/boot/dts/owl-*
+F:	arch/arm/boot/dts/actions/
 F:	arch/arm/mach-actions/
 F:	arch/arm64/boot/dts/actions/
 F:	drivers/clk/actions/
@@ -1884,6 +1811,7 @@ L:	linux-amlogic@lists.infradead.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/amlogic*
 F:	drivers/clk/meson/
+F:	include/dt-bindings/clock/amlogic,a1*
 F:	include/dt-bindings/clock/gxbb*
 F:	include/dt-bindings/clock/meson*
 
@@ -1911,10 +1839,12 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-amlogic@lists.infradead.org
 S:	Maintained
 W:	http://linux-meson.com/
-F:	arch/arm/boot/dts/meson*
+F:	Documentation/devicetree/bindings/phy/amlogic*
+F:	arch/arm/boot/dts/amlogic/
 F:	arch/arm/mach-meson/
 F:	arch/arm64/boot/dts/amlogic/
 F:	drivers/mmc/host/meson*
+F:	drivers/phy/amlogic/
 F:	drivers/pinctrl/meson/
 F:	drivers/rtc/rtc-meson*
 F:	drivers/soc/amlogic/
@@ -1925,7 +1855,7 @@ M:	Tsahee Zidenberg <tsahee@annapurnalabs.com>
 M:	Antoine Tenart <atenart@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/boot/dts/alpine*
+F:	arch/arm/boot/dts/amazon/
 F:	arch/arm/mach-alpine/
 F:	arch/arm64/boot/dts/amazon/
 F:	drivers/*/*alpine*
@@ -1935,9 +1865,11 @@ M:	Martin Povišer <povik+lin@cutebit.org>
 L:	asahi@lists.linux.dev
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/sound/adi,ssm3515.yaml
 F:	Documentation/devicetree/bindings/sound/apple,*
 F:	sound/soc/apple/*
 F:	sound/soc/codecs/cs42l83-i2c.c
+F:	sound/soc/codecs/ssm3515.c
 
 ARM/APPLE MACHINE SUPPORT
 M:	Hector Martin <marcan@marcan.st>
@@ -1996,7 +1928,7 @@ M:	Lars Persson <lars.persson@axis.com>
 L:	linux-arm-kernel@axis.com
 S:	Maintained
 F:	Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
-F:	arch/arm/boot/dts/artpec6*
+F:	arch/arm/boot/dts/axis/
 F:	arch/arm/mach-artpec
 F:	drivers/clk/axis
 F:	drivers/crypto/axis
@@ -2024,7 +1956,7 @@ S:	Supported
 Q:	https://patchwork.ozlabs.org/project/linux-aspeed/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed.git
 F:	Documentation/devicetree/bindings/arm/aspeed/
-F:	arch/arm/boot/dts/aspeed-*
+F:	arch/arm/boot/dts/aspeed/
 F:	arch/arm/mach-aspeed/
 N:	aspeed
 
@@ -2043,8 +1975,7 @@ ARM/CALXEDA HIGHBANK ARCHITECTURE
 M:	Andre Przywara <andre.przywara@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/boot/dts/ecx-*.dts*
-F:	arch/arm/boot/dts/highbank.dts
+F:	arch/arm/boot/dts/calxeda/
 F:	arch/arm/mach-highbank/
 
 ARM/CAVIUM THUNDER NETWORK DRIVER
@@ -2092,12 +2023,13 @@ ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
 M:	Baruch Siach <baruch@tkos.co.il>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/boot/dts/cx92755*
+F:	arch/arm/boot/dts/cnxt/
 N:	digicolor
 
 ARM/CORESIGHT FRAMEWORK AND DRIVERS
 M:	Suzuki K Poulose <suzuki.poulose@arm.com>
 R:	Mike Leach <mike.leach@linaro.org>
+R:	James Clark <james.clark@arm.com>
 R:	Leo Yan <leo.yan@linaro.org>
 L:	coresight@lists.linaro.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2131,7 +2063,7 @@ F:	Documentation/devicetree/bindings/arm/gemini.yaml
 F:	Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
 F:	Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
 F:	Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml
-F:	arch/arm/boot/dts/gemini*
+F:	arch/arm/boot/dts/gemini/
 F:	arch/arm/mach-gemini/
 F:	drivers/crypto/gemini/
 F:	drivers/net/ethernet/cortina/
@@ -2184,7 +2116,8 @@ R:	NXP Linux Team <linux-imx@nxp.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
-F:	arch/arm64/boot/dts/freescale/
+F:	arch/arm/boot/dts/nxp/imx/
+F:	arch/arm/boot/dts/nxp/mxs/
 X:	arch/arm64/boot/dts/freescale/fsl-*
 X:	arch/arm64/boot/dts/freescale/qoriq-*
 X:	drivers/media/i2c/
@@ -2197,7 +2130,7 @@ M:	Li Yang <leoyang.li@nxp.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
-F:	arch/arm/boot/dts/ls1021a*
+F:	arch/arm/boot/dts/nxp/ls/
 F:	arch/arm64/boot/dts/freescale/fsl-*
 F:	arch/arm64/boot/dts/freescale/qoriq-*
 
@@ -2209,7 +2142,7 @@ R:	Stefan Agner <stefan@agner.ch>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
-F:	arch/arm/boot/dts/vf*
+F:	arch/arm/boot/dts/nxp/vf/
 F:	arch/arm/mach-imx/*vf610*
 
 ARM/GUMSTIX MACHINE SUPPORT
@@ -2223,9 +2156,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 W:	http://www.hisilicon.com
 T:	git https://github.com/hisilicon/linux-hisi.git
-F:	arch/arm/boot/dts/hi3*
-F:	arch/arm/boot/dts/hip*
-F:	arch/arm/boot/dts/hisi*
+F:	arch/arm/boot/dts/hisilicon/
 F:	arch/arm/mach-hisi/
 F:	arch/arm64/boot/dts/hisilicon/
 
@@ -2247,8 +2178,7 @@ F:	Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml
 F:	Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
 F:	Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
 F:	Documentation/hwmon/gxp-fan-ctrl.rst
-F:	arch/arm/boot/dts/hpe-bmc*
-F:	arch/arm/boot/dts/hpe-gxp*
+F:	arch/arm/boot/dts/hpe/
 F:	arch/arm/mach-hpe/
 F:	drivers/clocksource/timer-gxp.c
 F:	drivers/hwmon/gxp-fan-ctrl.c
@@ -2262,7 +2192,7 @@ M:	Javier Martinez Canillas <javier@dowhile0.org>
 L:	linux-omap@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/boot/dts/omap3-igep*
+F:	arch/arm/boot/dts/ti/omap/omap3-igep*
 
 ARM/INTEL IXP4XX ARM ARCHITECTURE
 M:	Linus Walleij <linusw@kernel.org>
@@ -2275,7 +2205,7 @@ F:	Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
 F:	Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
 F:	Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion*
 F:	Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
-F:	arch/arm/boot/dts/intel-ixp*
+F:	arch/arm/boot/dts/intel/ixp/
 F:	arch/arm/mach-ixp4xx/
 F:	drivers/bus/intel-ixp4xx-eb.c
 F:	drivers/clocksource/timer-ixp4xx.c
@@ -2307,7 +2237,7 @@ M:	Vladimir Zapolskiy <vz@mleia.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
-F:	arch/arm/boot/dts/lpc43*
+F:	arch/arm/boot/dts/nxp/lpc/lpc43*
 F:	drivers/i2c/busses/i2c-lpc2k.c
 F:	drivers/memory/pl172.c
 F:	drivers/mtd/spi-nor/controllers/nxp-spifi.c
@@ -2320,7 +2250,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://github.com/vzapolskiy/linux-lpc32xx.git
 F:	Documentation/devicetree/bindings/i2c/i2c-pnx.txt
-F:	arch/arm/boot/dts/lpc32*
+F:	arch/arm/boot/dts/nxp/lpc/lpc32*
 F:	arch/arm/mach-lpc32xx/
 F:	drivers/i2c/busses/i2c-pnx.c
 F:	drivers/net/ethernet/nxp/lpc_eth.c
@@ -2338,8 +2268,8 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu.git
 F:	Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt
 F:	Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt
 F:	Documentation/devicetree/bindings/soc/dove/
-F:	arch/arm/boot/dts/dove*
-F:	arch/arm/boot/dts/orion5x*
+F:	arch/arm/boot/dts/marvell/dove*
+F:	arch/arm/boot/dts/marvell/orion5x*
 F:	arch/arm/mach-dove/
 F:	arch/arm/mach-mv78xx0/
 F:	arch/arm/mach-orion5x/
@@ -2354,12 +2284,13 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu.git
 F:	Documentation/devicetree/bindings/arm/marvell/
-F:	arch/arm/boot/dts/armada*
-F:	arch/arm/boot/dts/kirkwood*
+F:	arch/arm/boot/dts/marvell/armada*
+F:	arch/arm/boot/dts/marvell/kirkwood*
 F:	arch/arm/configs/mvebu_*_defconfig
 F:	arch/arm/mach-mvebu/
 F:	arch/arm64/boot/dts/marvell/armada*
 F:	arch/arm64/boot/dts/marvell/cn913*
+F:	drivers/clk/mvebu/
 F:	drivers/cpufreq/armada-37xx-cpufreq.c
 F:	drivers/cpufreq/armada-8k-cpufreq.c
 F:	drivers/cpufreq/mvebu-cpufreq.c
@@ -2389,10 +2320,7 @@ L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 W:	https://mtk.wiki.kernel.org/
 C:	irc://irc.libera.chat/linux-mediatek
-F:	arch/arm/boot/dts/mt2*
-F:	arch/arm/boot/dts/mt6*
-F:	arch/arm/boot/dts/mt7*
-F:	arch/arm/boot/dts/mt8*
+F:	arch/arm/boot/dts/mediatek/
 F:	arch/arm/mach-mediatek/
 F:	arch/arm64/boot/dts/mediatek/
 F:	drivers/soc/mediatek/
@@ -2408,18 +2336,25 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/phy/mediatek,*
 F:	drivers/phy/mediatek/
 
+ARM/MICROCHIP (ARM64) SoC support
+M:	Conor Dooley <conor@kernel.org>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@tuxon.dev>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Supported
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git
+F:	arch/arm64/boot/dts/microchip/
+
 ARM/Microchip (AT91) SoC support
 M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
-M:	Claudiu Beznea <claudiu.beznea@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@tuxon.dev>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 W:	http://www.linux4sam.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git
-F:	arch/arm/boot/dts/at91*.dts
-F:	arch/arm/boot/dts/at91*.dtsi
-F:	arch/arm/boot/dts/sama*.dts
-F:	arch/arm/boot/dts/sama*.dtsi
+F:	arch/arm/boot/dts/microchip/at91*
+F:	arch/arm/boot/dts/microchip/sama*
 F:	arch/arm/include/debug/at91.S
 F:	arch/arm/mach-at91/
 F:	drivers/memory/atmel*
@@ -2430,15 +2365,6 @@ X:	drivers/net/wireless/atmel/
 N:	at91
 N:	atmel
 
-ARM/MICROCHIP (ARM64) SoC support
-M:	Conor Dooley <conor@kernel.org>
-M:	Nicolas Ferre <nicolas.ferre@microchip.com>
-M:	Claudiu Beznea <claudiu.beznea@microchip.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
-T:	git https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git
-F:	arch/arm64/boot/dts/microchip/
-
 ARM/Microchip Sparx5 SoC support
 M:	Lars Povlsen <lars.povlsen@microchip.com>
 M:	Steen Hegelund <Steen.Hegelund@microchip.com>
@@ -2456,7 +2382,7 @@ M:	Taichi Sugaya <sugaya.taichi@socionext.com>
 M:	Takao Orito <orito.takao@socionext.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/boot/dts/milbeaut*
+F:	arch/arm/boot/dts/socionext/milbeaut*
 F:	arch/arm/mach-milbeaut/
 N:	milbeaut
 
@@ -2470,7 +2396,7 @@ T:	git git://github.com/linux-chenxing/linux.git
 F:	Documentation/devicetree/bindings/arm/mstar/*
 F:	Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml
 F:	Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
-F:	arch/arm/boot/dts/mstar-*
+F:	arch/arm/boot/dts/sigmastar/
 F:	arch/arm/mach-mstar/
 F:	drivers/clk/mstar/
 F:	drivers/clocksource/timer-msc313e.c
@@ -2489,7 +2415,7 @@ F:	Documentation/devicetree/bindings/arm/ste-*
 F:	Documentation/devicetree/bindings/arm/ux500.yaml
 F:	Documentation/devicetree/bindings/arm/ux500/
 F:	Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
-F:	arch/arm/boot/dts/ste-*
+F:	arch/arm/boot/dts/st/ste-*
 F:	arch/arm/mach-nomadik/
 F:	arch/arm/mach-ux500/
 F:	drivers/clk/clk-nomadik.c
@@ -2506,6 +2432,18 @@ F:	drivers/rtc/rtc-ab8500.c
 F:	drivers/rtc/rtc-pl031.c
 F:	drivers/soc/ux500/
 
+ARM/NUVOTON MA35 ARCHITECTURE
+M:	Jacky Huang <ychuang3@nuvoton.com>
+M:	Shan-Chun Hung <schung@nuvoton.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Supported
+F:	Documentation/devicetree/bindings/*/*/*ma35*
+F:	Documentation/devicetree/bindings/*/*ma35*
+F:	arch/arm64/boot/dts/nuvoton/*ma35*
+F:	drivers/*/*/*ma35*
+F:	drivers/*/*ma35*
+K:	ma35d1
+
 ARM/NUVOTON NPCM ARCHITECTURE
 M:	Avi Fishman <avifishman70@gmail.com>
 M:	Tomer Maimon <tmaimon77@gmail.com>
@@ -2517,9 +2455,8 @@ L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
 S:	Supported
 F:	Documentation/devicetree/bindings/*/*/*npcm*
 F:	Documentation/devicetree/bindings/*/*npcm*
-F:	Documentation/devicetree/bindings/arm/npcm/*
 F:	Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
-F:	arch/arm/boot/dts/nuvoton-npcm*
+F:	arch/arm/boot/dts/nuvoton/nuvoton-npcm*
 F:	arch/arm/mach-npcm/
 F:	arch/arm64/boot/dts/nuvoton/
 F:	drivers/*/*/*npcm*
@@ -2534,7 +2471,7 @@ L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
 S:	Maintained
 W:	https://github.com/neuschaefer/wpcm450/wiki
 F:	Documentation/devicetree/bindings/*/*wpcm*
-F:	arch/arm/boot/dts/nuvoton-wpcm450*
+F:	arch/arm/boot/dts/nuvoton/nuvoton-wpcm450*
 F:	arch/arm/configs/wpcm450_defconfig
 F:	arch/arm/mach-npcm/wpcm450.c
 F:	drivers/*/*/*wpcm*
@@ -2575,20 +2512,19 @@ F:	arch/arm64/boot/dts/qcom/sdm845-cheza*
 ARM/QUALCOMM SUPPORT
 M:	Andy Gross <agross@kernel.org>
 M:	Bjorn Andersson <andersson@kernel.org>
-R:	Konrad Dybcio <konrad.dybcio@linaro.org>
+M:	Konrad Dybcio <konrad.dybcio@linaro.org>
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git
 F:	Documentation/devicetree/bindings/*/qcom*
 F:	Documentation/devicetree/bindings/soc/qcom/
-F:	arch/arm/boot/dts/qcom-*.dts
-F:	arch/arm/boot/dts/qcom-*.dtsi
+F:	arch/arm/boot/dts/qcom/
 F:	arch/arm/configs/qcom_defconfig
 F:	arch/arm/mach-qcom/
 F:	arch/arm64/boot/dts/qcom/
+F:	drivers/*/*/pm8???-*
 F:	drivers/*/*/qcom*
 F:	drivers/*/*/qcom/
-F:	drivers/*/pm8???-*
 F:	drivers/*/qcom*
 F:	drivers/*/qcom/
 F:	drivers/bluetooth/btqcomsmd.c
@@ -2625,7 +2561,7 @@ F:	Documentation/devicetree/bindings/gpio/gpio-rda.yaml
 F:	Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml
 F:	Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml
 F:	Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
-F:	arch/arm/boot/dts/rda8810pl-*
+F:	arch/arm/boot/dts/unisoc/
 F:	drivers/clocksource/timer-rda.c
 F:	drivers/gpio/gpio-rda.c
 F:	drivers/irqchip/irq-rda-intc.c
@@ -2637,7 +2573,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-realtek-soc@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/arm/realtek.yaml
-F:	arch/arm/boot/dts/rtd*
+F:	arch/arm/boot/dts/realtek/
 F:	arch/arm/mach-realtek/
 F:	arch/arm64/boot/dts/realtek/
 
@@ -2651,13 +2587,7 @@ C:	irc://irc.libera.chat/renesas-soc
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
 F:	Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml
 F:	Documentation/devicetree/bindings/soc/renesas/
-F:	arch/arm/boot/dts/emev2*
-F:	arch/arm/boot/dts/gr-peach*
-F:	arch/arm/boot/dts/iwg20d-q7*
-F:	arch/arm/boot/dts/r7s*
-F:	arch/arm/boot/dts/r8a*
-F:	arch/arm/boot/dts/r9a*
-F:	arch/arm/boot/dts/sh*
+F:	arch/arm/boot/dts/renesas/
 F:	arch/arm/configs/shmobile_defconfig
 F:	arch/arm/include/debug/renesas-scif.S
 F:	arch/arm/mach-shmobile/
@@ -2690,8 +2620,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git
 F:	Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
 F:	Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
 F:	Documentation/devicetree/bindings/spi/spi-rockchip.yaml
-F:	arch/arm/boot/dts/rk3*
-F:	arch/arm/boot/dts/rv11*
+F:	arch/arm/boot/dts/rockchip/
 F:	arch/arm/mach-rockchip/
 F:	drivers/*/*/*rockchip*
 F:	drivers/*/*rockchip*
@@ -2710,14 +2639,12 @@ Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
 B:	mailto:linux-samsung-soc@vger.kernel.org
 C:	irc://irc.libera.chat/linux-exynos
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git
-F:	Documentation/arm/samsung/
+F:	Documentation/arch/arm/samsung/
 F:	Documentation/devicetree/bindings/arm/samsung/
 F:	Documentation/devicetree/bindings/hwinfo/samsung,*
 F:	Documentation/devicetree/bindings/power/pd-samsung.yaml
 F:	Documentation/devicetree/bindings/soc/samsung/
-F:	arch/arm/boot/dts/exynos*
-F:	arch/arm/boot/dts/s3c*
-F:	arch/arm/boot/dts/s5p*
+F:	arch/arm/boot/dts/samsung/
 F:	arch/arm/mach-exynos*/
 F:	arch/arm/mach-s3c/
 F:	arch/arm/mach-s5p*/
@@ -2777,7 +2704,7 @@ M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
 W:	http://www.rocketboards.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
-F:	arch/arm/boot/dts/socfpga*
+F:	arch/arm/boot/dts/intel/socfpga/
 F:	arch/arm/configs/socfpga_defconfig
 F:	arch/arm/mach-socfpga/
 F:	arch/arm64/boot/dts/altera/
@@ -2810,7 +2737,7 @@ S:	Maintained
 W:	http://www.stlinux.com
 F:	Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml
 F:	Documentation/devicetree/bindings/spi/st,ssc-spi.yaml
-F:	arch/arm/boot/dts/sti*
+F:	arch/arm/boot/dts/st/sti*
 F:	arch/arm/mach-sti/
 F:	drivers/ata/ahci_st.c
 F:	drivers/char/hw_random/st-rng.c
@@ -2843,8 +2770,9 @@ L:	linux-stm32@st-md-mailman.stormreply.com (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-next
-F:	arch/arm/boot/dts/stm32*
+F:	arch/arm/boot/dts/st/stm32*
 F:	arch/arm/mach-stm32/
+F:	arch/arm64/boot/dts/st/
 F:	drivers/clocksource/armv7m_systick.c
 N:	stm32
 N:	stm
@@ -2858,7 +2786,7 @@ F:	Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
 F:	Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
 F:	Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
 F:	Documentation/devicetree/bindings/reset/sunplus,reset.yaml
-F:	arch/arm/boot/dts/sunplus-sp7021*.dts*
+F:	arch/arm/boot/dts/sunplus/
 F:	arch/arm/configs/sp7021_*defconfig
 F:	arch/arm/mach-sunplus/
 F:	drivers/clk/clk-sp7021.c
@@ -2872,7 +2800,7 @@ M:	Jisheng Zhang <jszhang@kernel.org>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/boot/dts/berlin*
+F:	arch/arm/boot/dts/synaptics/
 F:	arch/arm/mach-berlin/
 F:	arch/arm64/boot/dts/synaptics/
 
@@ -2914,7 +2842,7 @@ M:	Santosh Shilimkar <ssantosh@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
-F:	arch/arm/boot/dts/keystone-*
+F:	arch/arm/boot/dts/ti/keystone/
 F:	arch/arm/mach-keystone/
 
 ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
@@ -2946,7 +2874,6 @@ F:	Documentation/devicetree/bindings/arm/ti/k3.yaml
 F:	Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
 F:	arch/arm64/boot/dts/ti/Makefile
 F:	arch/arm64/boot/dts/ti/k3-*
-F:	include/dt-bindings/pinctrl/k3.h
 
 ARM/TOSHIBA VISCONTI ARCHITECTURE
 M:	Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
@@ -2979,7 +2906,7 @@ F:	Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
 F:	Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
 F:	Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
 F:	Documentation/devicetree/bindings/soc/socionext/socionext,uniphier*.yaml
-F:	arch/arm/boot/dts/uniphier*
+F:	arch/arm/boot/dts/socionext/uniphier*
 F:	arch/arm/include/asm/hardware/cache-uniphier.h
 F:	arch/arm/mach-uniphier/
 F:	arch/arm/mm/cache-uniphier.c
@@ -3004,7 +2931,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	*/*/*/vexpress*
 F:	*/*/vexpress*
-F:	arch/arm/boot/dts/vexpress*
+F:	arch/arm/boot/dts/arm/vexpress*
 F:	arch/arm/mach-versatile/
 F:	arch/arm64/boot/dts/arm/
 F:	drivers/clk/versatile/clk-vexpress-osc.c
@@ -3062,7 +2989,7 @@ M:	Will Deacon <will@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
-F:	Documentation/arm64/
+F:	Documentation/arch/arm64/
 F:	arch/arm64/
 F:	tools/testing/selftests/arm64/
 X:	arch/arm64/boot/dts/
@@ -3323,7 +3250,7 @@ F:	include/uapi/linux/atm*
 
 ATMEL MACB ETHERNET DRIVER
 M:	Nicolas Ferre <nicolas.ferre@microchip.com>
-M:	Claudiu Beznea <claudiu.beznea@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@tuxon.dev>
 S:	Supported
 F:	drivers/net/ethernet/cadence/
 
@@ -3335,9 +3262,8 @@ F:	Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
 F:	drivers/input/touchscreen/atmel_mxt_ts.c
 
 ATMEL WIRELESS DRIVER
-M:	Simon Kelley <simon@thekelleys.org.uk>
 L:	linux-wireless@vger.kernel.org
-S:	Maintained
+S:	Orphan
 W:	http://www.thekelleys.org.uk/atmel
 W:	http://atmelwlandriver.sourceforge.net/
 F:	drivers/net/wireless/atmel/atmel*
@@ -3384,6 +3310,16 @@ F:	include/uapi/linux/audit.h
 F:	kernel/audit*
 F:	lib/*audit.c
 
+AUXILIARY BUS DRIVER
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+R:	Dave Ertman <david.m.ertman@intel.com>
+R:	Ira Weiny <ira.weiny@intel.com>
+S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
+F:	Documentation/driver-api/auxiliary_bus.rst
+F:	drivers/base/auxiliary.c
+F:	include/linux/auxiliary_bus.h
+
 AUXILIARY DISPLAY DRIVERS
 M:	Miguel Ojeda <ojeda@kernel.org>
 S:	Maintained
@@ -3411,10 +3347,10 @@ AXENTIA ARM DEVICES
 M:	Peter Rosin <peda@axentia.se>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/boot/dts/at91-linea.dtsi
-F:	arch/arm/boot/dts/at91-natte.dtsi
-F:	arch/arm/boot/dts/at91-nattis-2-natte-2.dts
-F:	arch/arm/boot/dts/at91-tse850-3.dts
+F:	arch/arm/boot/dts/microchip/at91-linea.dtsi
+F:	arch/arm/boot/dts/microchip/at91-natte.dtsi
+F:	arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts
+F:	arch/arm/boot/dts/microchip/at91-tse850-3.dts
 
 AXENTIA ASOC DRIVERS
 M:	Peter Rosin <peda@axentia.se>
@@ -3457,7 +3393,7 @@ F:	drivers/media/radio/radio-aztech*
 B43 WIRELESS DRIVER
 L:	linux-wireless@vger.kernel.org
 L:	b43-dev@lists.infradead.org
-S:	Odd Fixes
+S:	Orphan
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/b43
 F:	drivers/net/wireless/broadcom/b43/
 
@@ -3564,18 +3500,24 @@ M:	Yury Norov <yury.norov@gmail.com>
 R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 R:	Rasmus Villemoes <linux@rasmusvillemoes.dk>
 S:	Maintained
+F:	include/linux/bitfield.h
 F:	include/linux/bitmap.h
+F:	include/linux/bits.h
 F:	include/linux/cpumask.h
 F:	include/linux/find.h
 F:	include/linux/nodemask.h
+F:	include/vdso/bits.h
 F:	lib/bitmap.c
 F:	lib/cpumask.c
 F:	lib/cpumask_kunit.c
 F:	lib/find_bit.c
 F:	lib/find_bit_benchmark.c
 F:	lib/test_bitmap.c
+F:	tools/include/linux/bitfield.h
 F:	tools/include/linux/bitmap.h
+F:	tools/include/linux/bits.h
 F:	tools/include/linux/find.h
+F:	tools/include/vdso/bits.h
 F:	tools/lib/bitmap.c
 F:	tools/lib/find_bit.c
 
@@ -3613,6 +3555,7 @@ S:	Supported
 W:	http://www.bluez.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
+F:	Documentation/devicetree/bindings/net/bluetooth/
 F:	drivers/bluetooth/
 
 BLUETOOTH SUBSYSTEM
@@ -3900,7 +3843,7 @@ S:	Supported
 F:	drivers/net/ethernet/broadcom/b44.*
 
 BROADCOM B53/SF2 ETHERNET SWITCH DRIVER
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 L:	netdev@vger.kernel.org
 L:	openwrt-devel@lists.openwrt.org (subscribers-only)
 S:	Supported
@@ -3911,7 +3854,7 @@ F:	include/linux/dsa/brcm.h
 F:	include/linux/platform_data/b53.h
 
 BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -3925,7 +3868,7 @@ N:	bcm283*
 N:	raspberrypi
 
 BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 M:	Ray Jui <rjui@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
@@ -3964,25 +3907,26 @@ F:	Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
 F:	drivers/pinctrl/bcm/pinctrl-bcm4908.c
 
 BROADCOM BCM5301X ARM ARCHITECTURE
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/boot/dts/bcm470*
-F:	arch/arm/boot/dts/bcm5301*
-F:	arch/arm/boot/dts/bcm953012*
+F:	arch/arm/boot/dts/broadcom/bcm-ns.dtsi
+F:	arch/arm/boot/dts/broadcom/bcm470*
+F:	arch/arm/boot/dts/broadcom/bcm5301*
+F:	arch/arm/boot/dts/broadcom/bcm953012*
 F:	arch/arm/mach-bcm/bcm_5301x.c
 
 BROADCOM BCM53573 ARM ARCHITECTURE
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 M:	Rafał Miłecki <rafal@milecki.pl>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/boot/dts/bcm47189*
-F:	arch/arm/boot/dts/bcm53573*
+F:	arch/arm/boot/dts/broadcom/bcm47189*
+F:	arch/arm/boot/dts/broadcom/bcm53573*
 
 BROADCOM BCM63XX/BCM33XX UDC DRIVER
 M:	Kevin Cernekee <cernekee@gmail.com>
@@ -3991,13 +3935,13 @@ S:	Maintained
 F:	drivers/usb/gadget/udc/bcm63xx_udc.*
 
 BROADCOM BCM7XXX ARM ARCHITECTURE
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git https://github.com/broadcom/stblinux.git
 F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
-F:	arch/arm/boot/dts/bcm7*.dts*
+F:	arch/arm/boot/dts/broadcom/bcm7*.dts*
 F:	arch/arm/include/asm/hardware/cache-b15-rac.h
 F:	arch/arm/mach-bcm/*brcmstb*
 F:	arch/arm/mm/cache-b15-rac.c
@@ -4011,7 +3955,7 @@ BROADCOM BCMBCA ARM ARCHITECTURE
 M:	William Zhang <william.zhang@broadcom.com>
 M:	Anand Gore <anand.gore@broadcom.com>
 M:	Kursad Oney <kursad.oney@broadcom.com>
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 M:	Rafał Miłecki <rafal@milecki.pl>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -4036,7 +3980,7 @@ N:	bcm[9]?6858
 N:	bcm[9]?6878
 
 BROADCOM BDC DRIVER
-M:	Justin Chen <justinpopo6@gmail.com>
+M:	Justin Chen <justin.chen@broadcom.com>
 M:	Al Cooper <alcooperx@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-usb@vger.kernel.org
@@ -4052,7 +3996,7 @@ S:	Maintained
 F:	drivers/cpufreq/bmips-cpufreq.c
 
 BROADCOM BMIPS MIPS ARCHITECTURE
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
@@ -4120,14 +4064,14 @@ F:	drivers/net/wireless/broadcom/brcm80211/
 
 BROADCOM BRCMSTB GPIO DRIVER
 M:	Doug Berger <opendmb@gmail.com>
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 S:	Supported
 F:	Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
 F:	drivers/gpio/gpio-brcmstb.c
 
 BROADCOM BRCMSTB I2C DRIVER
-M:	Kamal Dasu <kdasu.kdev@gmail.com>
+M:	Kamal Dasu <kamal.dasu@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-i2c@vger.kernel.org
 S:	Supported
@@ -4143,7 +4087,7 @@ F:	Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
 F:	drivers/tty/serial/8250/8250_bcm7271.c
 
 BROADCOM BRCMSTB USB EHCI DRIVER
-M:	Justin Chen <justinpopo6@gmail.com>
+M:	Justin Chen <justin.chen@broadcom.com>
 M:	Al Cooper <alcooperx@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-usb@vger.kernel.org
@@ -4160,7 +4104,7 @@ F:	Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
 F:	drivers/usb/misc/brcmstb-usb-pinmap.c
 
 BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
-M:	Justin Chen <justinpopo6@gmail.com>
+M:	Justin Chen <justin.chen@broadcom.com>
 M:	Al Cooper <alcooperx@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-kernel@vger.kernel.org
@@ -4178,8 +4122,15 @@ F:	Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml
 F:	drivers/spi/spi-bcm63xx-hsspi.c
 F:	drivers/spi/spi-bcmbca-hsspi.c
 
+BROADCOM BCM6348/BCM6358 SPI controller DRIVER
+M:	Jonas Gorski <jonas.gorski@gmail.com>
+L:	linux-spi@vger.kernel.org
+S:	Odd Fixes
+F:	Documentation/devicetree/bindings/spi/spi-bcm63xx.txt
+F:	drivers/spi/spi-bcm63xx.c
+
 BROADCOM ETHERNET PHY DRIVERS
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -4190,7 +4141,7 @@ F:	include/linux/brcmphy.h
 
 BROADCOM GENET ETHERNET DRIVER
 M:	Doug Berger <opendmb@gmail.com>
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -4274,7 +4225,7 @@ F:	drivers/firmware/broadcom/*
 
 BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
 M:	Rafał Miłecki <rafal@milecki.pl>
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
@@ -4290,7 +4241,7 @@ F:	drivers/bcma/
 F:	include/linux/bcma/
 
 BROADCOM SPI DRIVER
-M:	Kamal Dasu <kdasu.kdev@gmail.com>
+M:	Kamal Dasu <kamal.dasu@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
@@ -4324,7 +4275,7 @@ F:	drivers/memory/brcmstb_dpfe.c
 
 BROADCOM STB NAND FLASH DRIVER
 M:	Brian Norris <computersforpeace@gmail.com>
-M:	Kamal Dasu <kdasu.kdev@gmail.com>
+M:	Kamal Dasu <kamal.dasu@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
@@ -4334,7 +4285,7 @@ F:	include/linux/platform_data/brcmnand.h
 BROADCOM STB PCIE DRIVER
 M:	Jim Quinlan <jim2101024@gmail.com>
 M:	Nicolas Saenz Julienne <nsaenz@kernel.org>
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
@@ -4342,7 +4293,7 @@ F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 F:	drivers/pci/controller/pcie-brcmstb.c
 
 BROADCOM SYSTEMPORT ETHERNET DRIVER
-M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Florian Fainelli <florian.fainelli@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -4487,6 +4438,13 @@ S:	Supported
 F:	Documentation/filesystems/caching/cachefiles.rst
 F:	fs/cachefiles/
 
+CACHESTAT: PAGE CACHE STATS FOR A FILE
+M:	Nhat Pham <nphamcs@gmail.com>
+M:	Johannes Weiner <hannes@cmpxchg.org>
+L:	linux-mm@kvack.org
+S:	Maintained
+F:	tools/testing/selftests/cachestat/test_cachestat.c
+
 CADENCE MIPI-CSI2 BRIDGES
 M:	Maxime Ripard <mripard@kernel.org>
 L:	linux-media@vger.kernel.org
@@ -4504,7 +4462,6 @@ CADENCE USB3 DRD IP DRIVER
 M:	Peter Chen <peter.chen@kernel.org>
 M:	Pawel Laszczak <pawell@cadence.com>
 R:	Roger Quadros <rogerq@kernel.org>
-R:	Aswath Govindraju <a-govindraju@ti.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
@@ -4512,6 +4469,12 @@ F:	Documentation/devicetree/bindings/usb/cdns,usb3.yaml
 F:	drivers/usb/cdns3/
 X:	drivers/usb/cdns3/cdnsp*
 
+CADENCE USBHS DRIVER
+M:	Pawel Laszczak <pawell@cadence.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	drivers/usb/gadget/udc/cdns2
+
 CADENCE USBSSP DRD IP DRIVER
 M:	Pawel Laszczak <pawell@cadence.com>
 L:	linux-usb@vger.kernel.org
@@ -5184,16 +5147,25 @@ S:	Maintained
 F:	include/linux/compiler_attributes.h
 
 COMPUTE EXPRESS LINK (CXL)
+M:	Davidlohr Bueso <dave@stgolabs.net>
+M:	Jonathan Cameron <jonathan.cameron@huawei.com>
+M:	Dave Jiang <dave.jiang@intel.com>
 M:	Alison Schofield <alison.schofield@intel.com>
 M:	Vishal Verma <vishal.l.verma@intel.com>
 M:	Ira Weiny <ira.weiny@intel.com>
-M:	Ben Widawsky <bwidawsk@kernel.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-cxl@vger.kernel.org
 S:	Maintained
 F:	drivers/cxl/
 F:	include/uapi/linux/cxl_mem.h
 
+COMPUTE EXPRESS LINK PMU (CPMU)
+M:	Jonathan Cameron <jonathan.cameron@huawei.com>
+L:	linux-cxl@vger.kernel.org
+S:	Maintained
+F:	Documentation/admin-guide/perf/cxl.rst
+F:	drivers/perf/cxl_pmu.c
+
 CONEXANT ACCESSRUNNER USB DRIVER
 L:	accessrunner-general@lists.sourceforge.net
 S:	Orphan
@@ -5344,6 +5316,18 @@ F:	include/linux/sched/cpufreq.h
 F:	kernel/sched/cpufreq*.c
 F:	tools/testing/selftests/cpufreq/
 
+CPU HOTPLUG
+M:	Thomas Gleixner <tglx@linutronix.de>
+M:	Peter Zijlstra <peterz@infradead.org>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git smp/core
+F:	include/linux/cpu.h
+F:	include/linux/cpuhotplug.h
+F:	include/linux/smpboot.h
+F:	kernel/cpu.c
+F:	kernel/smpboot.*
+
 CPU IDLE TIME MANAGEMENT FRAMEWORK
 M:	"Rafael J. Wysocki" <rafael@kernel.org>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
@@ -5477,8 +5461,7 @@ F:	Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
 F:	drivers/net/can/ctucanfd/
 
 CW1200 WLAN driver
-M:	Solomon Peachy <pizza@shaftnet.org>
-S:	Maintained
+S:	Orphan
 F:	drivers/net/wireless/st/cw1200/
 
 CX18 VIDEO4LINUX DRIVER
@@ -5712,10 +5695,7 @@ DC395x SCSI driver
 M:	Oliver Neukum <oliver@neukum.org>
 M:	Ali Akcaagac <aliakc@web.de>
 M:	Jamie Lenehan <lenehan@twibble.org>
-L:	dc395x@twibble.org
 S:	Maintained
-W:	http://twibble.org/dist/dc395x/
-W:	http://lists.twibble.org/mailman/listinfo/dc395x/
 F:	Documentation/scsi/dc395x.rst
 F:	drivers/scsi/dc395x.*
 
@@ -5733,8 +5713,8 @@ M:	Thomas Gleixner <tglx@linutronix.de>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core/debugobjects
-F:	lib/debugobjects.c
 F:	include/linux/debugobjects.h
+F:	lib/debugobjects.c
 
 DECSTATION PLATFORM SUPPORT
 M:	"Maciej W. Rozycki" <macro@orcam.me.uk>
@@ -5825,6 +5805,7 @@ M:	Armin Wolf <W_Armin@gmx.de>
 S:	Maintained
 F:	Documentation/ABI/testing/debugfs-dell-wmi-ddv
 F:	Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv
+F:	Documentation/wmi/devices/dell-wmi-ddv.rst
 F:	drivers/platform/x86/dell/dell-wmi-ddv.c
 
 DELL WMI DESCRIPTOR DRIVER
@@ -5889,7 +5870,9 @@ S:	Orphan
 F:	drivers/mtd/nand/raw/denali*
 
 DESIGNWARE EDMA CORE IP DRIVER
-M:	Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+R:	Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+R:	Serge Semin <fancer.lancer@gmail.com>
 L:	dmaengine@vger.kernel.org
 S:	Maintained
 F:	drivers/dma/dw-edma/
@@ -6006,15 +5989,15 @@ DH ELECTRONICS IMX6 DHCOM/DHCOR BOARD SUPPORT
 M:	Christoph Niedermaier <cniedermaier@dh-electronics.com>
 L:	kernel@dh-electronics.com
 S:	Maintained
-F:	arch/arm/boot/dts/imx6*-dhcom-*
-F:	arch/arm/boot/dts/imx6*-dhcor-*
+F:	arch/arm/boot/dts/nxp/imx/imx6*-dhcom-*
+F:	arch/arm/boot/dts/nxp/imx/imx6*-dhcor-*
 
 DH ELECTRONICS STM32MP1 DHCOM/DHCOR BOARD SUPPORT
 M:	Marek Vasut <marex@denx.de>
 L:	kernel@dh-electronics.com
 S:	Maintained
-F:	arch/arm/boot/dts/stm32mp1*-dhcom-*
-F:	arch/arm/boot/dts/stm32mp1*-dhcor-*
+F:	arch/arm/boot/dts/st/stm32mp1*-dhcom-*
+F:	arch/arm/boot/dts/st/stm32mp1*-dhcor-*
 
 DIALOG SEMICONDUCTOR DRIVERS
 M:	Support Opensource <support.opensource@diasemi.com>
@@ -6227,6 +6210,12 @@ X:	Documentation/power/
 X:	Documentation/spi/
 X:	Documentation/userspace-api/media/
 
+DOCUMENTATION PROCESS
+M:	Jonathan Corbet <corbet@lwn.net>
+L:	workflows@vger.kernel.org
+S:	Maintained
+F:	Documentation/process/
+
 DOCUMENTATION REPORTING ISSUES
 M:	Thorsten Leemhuis <linux@leemhuis.info>
 L:	linux-doc@vger.kernel.org
@@ -6583,6 +6572,7 @@ M:	Rob Clark <robdclark@gmail.com>
 M:	Abhinav Kumar <quic_abhinavk@quicinc.com>
 M:	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
 R:	Sean Paul <sean@poorly.run>
+R:	Marijn Suijten <marijn.suijten@somainline.org>
 L:	linux-arm-msm@vger.kernel.org
 L:	dri-devel@lists.freedesktop.org
 L:	freedreno@lists.freedesktop.org
@@ -6703,6 +6693,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
 F:	drivers/gpu/drm/panel/panel-samsung-s6d27a1.c
 
+DRM DRIVER FOR SAMSUNG S6D7AA0 PANELS
+M:	Artur Weber <aweber.kernel@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
+F:	drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
+
 DRM DRIVER FOR SITRONIX ST7586 PANELS
 M:	David Lechner <david@lechnology.com>
 S:	Maintained
@@ -6775,6 +6771,7 @@ F:	drivers/gpu/drm/udl/
 DRM DRIVER FOR VIRTUAL KERNEL MODESETTING (VKMS)
 M:	Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
 M:	Melissa Wen <melissa.srw@gmail.com>
+M:	Maíra Canal <mairacanal@riseup.net>
 R:	Haneen Mohammed <hamohammed.sa@gmail.com>
 R:	Daniel Vetter <daniel@ffwll.ch>
 L:	dri-devel@lists.freedesktop.org
@@ -6877,6 +6874,7 @@ S:	Maintained
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/bridge/
 F:	drivers/gpu/drm/bridge/
+F:	drivers/gpu/drm/drm_bridge.c
 F:	include/drm/drm_bridge.h
 
 DRM DRIVERS FOR EXYNOS
@@ -6985,8 +6983,7 @@ F:	Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
 F:	Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
 F:	Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
 F:	Documentation/devicetree/bindings/display/renesas,du.yaml
-F:	drivers/gpu/drm/rcar-du/
-F:	drivers/gpu/drm/shmobile/
+F:	drivers/gpu/drm/renesas/
 F:	include/linux/platform_data/shmob_drm.h
 
 DRM DRIVERS FOR ROCKCHIP
@@ -7082,7 +7079,6 @@ F:	Documentation/gpu/xen-front.rst
 F:	drivers/gpu/drm/xen/
 
 DRM DRIVERS FOR XILINX
-M:	Hyun Kwon <hyun.kwon@xilinx.com>
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
@@ -7482,6 +7478,14 @@ L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/mpc85xx_edac.[ch]
 
+EDAC-NPCM
+M:	Marvin Lin <kflin@nuvoton.com>
+M:	Stanley Chu <yschu@nuvoton.com>
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml
+F:	drivers/edac/npcm_edac.c
+
 EDAC-PASEMI
 M:	Egor Martovetsky <egor@pasemi.com>
 L:	linux-edac@vger.kernel.org
@@ -7978,6 +7982,12 @@ S:	Maintained
 F:	drivers/hwmon/f75375s.c
 F:	include/linux/f75375s.h
 
+FINTEK F81604 USB to 2xCANBUS DEVICE DRIVER
+M:	Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
+L:	linux-can@vger.kernel.org
+S:	Maintained
+F:	drivers/net/can/usb/f81604.c
+
 FIREWIRE AUDIO DRIVERS and IEC 61883-1/6 PACKET STREAMING ENGINE
 M:	Clemens Ladisch <clemens@ladisch.de>
 M:	Takashi Sakamoto <o-takashi@sakamocchi.jp>
@@ -8073,6 +8083,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/har
 F:	include/linux/fortify-string.h
 F:	lib/fortify_kunit.c
 F:	lib/memcpy_kunit.c
+F:	lib/strcat_kunit.c
 F:	lib/strscpy_kunit.c
 F:	lib/test_fortify/*
 F:	scripts/test_fortify.sh
@@ -8669,8 +8680,14 @@ S:	Maintained
 F:	drivers/input/touchscreen/resistive-adc-touch.c
 
 GENERIC STRING LIBRARY
+M:	Kees Cook <keescook@chromium.org>
 R:	Andy Shevchenko <andy@kernel.org>
-S:	Maintained
+L:	linux-hardening@vger.kernel.org
+S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening
+F:	include/linux/string.h
+F:	include/linux/string_choices.h
+F:	include/linux/string_helpers.h
 F:	lib/string.c
 F:	lib/string_helpers.c
 F:	lib/test-string_helpers.c
@@ -8795,6 +8812,7 @@ R:	Michael Walle <michael@walle.cc>
 S:	Maintained
 F:	drivers/gpio/gpio-regmap.c
 F:	include/linux/gpio/regmap.h
+K:	(devm_)?gpio_regmap_(un)?register
 
 GPIO SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
@@ -9158,6 +9176,12 @@ L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/hid/hid-logitech-*
 
+HID NVIDIA SHIELD DRIVER
+M:	Rahul Rameshbabu <rrameshbabu@nvidia.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/hid/hid-nvidia-shield.c
+
 HID PHOENIX RC FLIGHT CONTROLLER
 M:	Marcus Folkesson <marcus.folkesson@gmail.com>
 L:	linux-input@vger.kernel.org
@@ -9352,7 +9376,6 @@ F:	drivers/crypto/hisilicon/sgl.c
 F:	include/linux/hisi_acc_qm.h
 
 HISILICON ROCE DRIVER
-M:	Haoyue Xu <xuhaoyue1@hisilicon.com>
 M:	Junxian Huang <huangjunxian6@hisilicon.com>
 L:	linux-rdma@vger.kernel.org
 S:	Maintained
@@ -9427,6 +9450,13 @@ F:	lib/test_hmm*
 F:	mm/hmm*
 F:	tools/testing/selftests/mm/*hmm*
 
+HONEYWELL MPRLS0025PA PRESSURE SENSOR SERIES IIO DRIVER
+M:	Andreas Klinger <ak@it-klinger.de>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
+F:	drivers/iio/pressure/mprls0025pa.c
+
 HOST AP DRIVER
 M:	Jouni Malinen <j@w1.fi>
 L:	linux-wireless@vger.kernel.org
@@ -9439,6 +9469,13 @@ L:	platform-driver-x86@vger.kernel.org
 S:	Orphan
 F:	drivers/platform/x86/hp/tc1100-wmi.c
 
+HP WMI HARDWARE MONITOR DRIVER
+M:	James Seo <james@equiv.tech>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/hp-wmi-sensors.rst
+F:	drivers/hwmon/hp-wmi-sensors.c
+
 HPET:	High Precision Event Timers driver
 M:	Clemens Ladisch <clemens@ladisch.de>
 S:	Maintained
@@ -9623,6 +9660,7 @@ F:	tools/hv/
 
 HYPERBUS SUPPORT
 M:	Vignesh Raghavendra <vigneshr@ti.com>
+R:	Tudor Ambarus <tudor.ambarus@linaro.org>
 L:	linux-mtd@lists.infradead.org
 S:	Supported
 Q:	http://patchwork.ozlabs.org/project/linux-mtd/list/
@@ -10264,6 +10302,13 @@ L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/fbdev/i810/
 
+INTEL 8254 COUNTER DRIVER
+M:	William Breathitt Gray <william.gray@linaro.org>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	drivers/counter/i8254.c
+F:	include/linux/i8254.h
+
 INTEL 8255 GPIO DRIVER
 M:	William Breathitt Gray <william.gray@linaro.org>
 L:	linux-gpio@vger.kernel.org
@@ -10346,9 +10391,8 @@ M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
 M:	Tony Nguyen <anthony.l.nguyen@intel.com>
 L:	intel-wired-lan@lists.osuosl.org (moderated for non-subscribers)
 S:	Supported
-W:	http://www.intel.com/support/feedback.htm
-W:	http://e1000.sourceforge.net/
-Q:	http://patchwork.ozlabs.org/project/intel-wired-lan/list/
+W:	https://www.intel.com/content/www/us/en/support.html
+Q:	https://patchwork.ozlabs.org/project/intel-wired-lan/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue.git
 F:	Documentation/networking/device_drivers/ethernet/intel/
@@ -10470,7 +10514,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	Documentation/admin-guide/media/ipu3.rst
 F:	Documentation/admin-guide/media/ipu3_rcb.svg
-F:	Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst
+F:	Documentation/userspace-api/media/v4l/metafmt-intel-ipu3.rst
 F:	drivers/staging/media/ipu3/
 
 INTEL ISHTP ECLITE DRIVER
@@ -10814,7 +10858,6 @@ S:	Maintained
 F:	drivers/net/ethernet/sgi/ioc3-eth.c
 
 IOMAP FILESYSTEM LIBRARY
-M:	Christoph Hellwig <hch@infradead.org>
 M:	Darrick J. Wong <djwong@kernel.org>
 L:	linux-xfs@vger.kernel.org
 L:	linux-fsdevel@vger.kernel.org
@@ -11275,6 +11318,10 @@ W:	http://kernelnewbies.org/KernelJanitors
 KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
 M:	Chuck Lever <chuck.lever@oracle.com>
 M:	Jeff Layton <jlayton@kernel.org>
+R:	Neil Brown <neilb@suse.de>
+R:	Olga Kornievskaia <kolga@netapp.com>
+R:	Dai Ngo <Dai.Ngo@oracle.com>
+R:	Tom Talpey <tom@talpey.com>
 L:	linux-nfs@vger.kernel.org
 S:	Supported
 W:	http://nfs.sourceforge.net/
@@ -11332,6 +11379,8 @@ L:	linux-kselftest@vger.kernel.org
 L:	kunit-dev@googlegroups.com
 S:	Maintained
 W:	https://google.github.io/kunit-docs/third_party/kernel/docs/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git kunit
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git kunit-fixes
 F:	Documentation/dev-tools/kunit/
 F:	include/kunit/
 F:	lib/kunit/
@@ -11380,7 +11429,6 @@ F:	tools/testing/selftests/kvm/aarch64/
 
 KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
 M:	Huacai Chen <chenhuacai@kernel.org>
-M:	Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
 L:	linux-mips@vger.kernel.org
 L:	kvm@vger.kernel.org
 S:	Maintained
@@ -11390,7 +11438,13 @@ F:	arch/mips/include/uapi/asm/kvm*
 F:	arch/mips/kvm/
 
 KERNEL VIRTUAL MACHINE FOR POWERPC (KVM/powerpc)
+M:	Michael Ellerman <mpe@ellerman.id.au>
+R:	Nicholas Piggin <npiggin@gmail.com>
 L:	linuxppc-dev@lists.ozlabs.org
+L:	kvm@vger.kernel.org
+S:	Maintained (Book3S 64-bit HV)
+S:	Odd fixes (Book3S 64-bit PR)
+S:	Orphan (Book3E and 32-bit)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git topic/ppc-kvm
 F:	arch/powerpc/include/asm/kvm*
 F:	arch/powerpc/include/uapi/asm/kvm*
@@ -11436,6 +11490,7 @@ M:	Sean Christopherson <seanjc@google.com>
 M:	Paolo Bonzini <pbonzini@redhat.com>
 L:	kvm@vger.kernel.org
 S:	Supported
+P:	Documentation/process/maintainer-kvm-x86.rst
 T:	git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
 F:	arch/x86/include/asm/kvm*
 F:	arch/x86/include/asm/svm.h
@@ -11752,7 +11807,7 @@ LEGO MINDSTORMS EV3
 R:	David Lechner <david@lechnology.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml
-F:	arch/arm/boot/dts/da850-lego-ev3.dts
+F:	arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
 F:	drivers/power/supply/lego_ev3_battery.c
 
 LEGO USB Tower driver
@@ -11923,11 +11978,12 @@ F:	lib/linear_ranges.c
 F:	lib/test_linear_ranges.c
 
 LINUX FOR POWER MACINTOSH
-M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Odd Fixes
+S:	Orphan
 F:	arch/powerpc/platforms/powermac/
 F:	drivers/macintosh/
+X:	drivers/macintosh/adb-iop.c
+X:	drivers/macintosh/via-macii.c
 
 LINUX FOR POWERPC (32-BIT AND 64-BIT)
 M:	Michael Ellerman <mpe@ellerman.id.au>
@@ -12025,6 +12081,13 @@ F:	Documentation/litmus-tests/
 F:	Documentation/memory-barriers.txt
 F:	tools/memory-model/
 
+LINUX-NEXT TREE
+M:	Stephen Rothwell <sfr@canb.auug.org.au>
+L:	linux-next@vger.kernel.org
+S:	Supported
+B:	mailto:linux-next@vger.kernel.org and the appropriate development tree
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/
+
 LIS3LV02D ACCELEROMETER DRIVER
 M:	Eric Piel <eric.piel@tremplin-utc.net>
 S:	Maintained
@@ -12417,6 +12480,7 @@ F:	net/mctp/
 
 MAPLE TREE
 M:	Liam R. Howlett <Liam.Howlett@oracle.com>
+L:	maple-tree@lists.infradead.org
 L:	linux-mm@kvack.org
 S:	Supported
 F:	Documentation/core-api/maple_tree.rst
@@ -12528,30 +12592,25 @@ F:	Documentation/devicetree/bindings/net/marvell,pp2.yaml
 F:	drivers/net/ethernet/marvell/mvpp2/
 
 MARVELL MWIFIEX WIRELESS DRIVER
-M:	Amitkumar Karwar <amitkarwar@gmail.com>
-M:	Ganapathi Bhat <ganapathi017@gmail.com>
-M:	Sharvari Harisangam <sharvari.harisangam@nxp.com>
-M:	Xinming Hu <huxinming820@gmail.com>
+M:	Brian Norris <briannorris@chromium.org>
 L:	linux-wireless@vger.kernel.org
-S:	Maintained
+S:	Odd Fixes
 F:	drivers/net/wireless/marvell/mwifiex/
 
 MARVELL MWL8K WIRELESS DRIVER
-M:	Lennert Buytenhek <buytenh@wantstofly.org>
 L:	linux-wireless@vger.kernel.org
-S:	Odd Fixes
+S:	Orphan
 F:	drivers/net/wireless/marvell/mwl8k.c
 
 MARVELL NAND CONTROLLER DRIVER
 M:	Miquel Raynal <miquel.raynal@bootlin.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/mtd/marvell-nand.txt
 F:	drivers/mtd/nand/raw/marvell_nand.c
 
 MARVELL OCTEON ENDPOINT DRIVER
 M:	Veerasenareddy Burru <vburru@marvell.com>
-M:	Abhijit Ayarekar <aayarekar@marvell.com>
+M:	Sathesh Edara <sedara@marvell.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/marvell/octeon_ep
@@ -12633,6 +12692,15 @@ F:	Documentation/userspace-api/media/drivers/max2175.rst
 F:	drivers/media/i2c/max2175*
 F:	include/uapi/linux/max2175.h
 
+MAX31827 TEMPERATURE SWITCH DRIVER
+M:	Daniel Matyas <daniel.matyas@analog.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Supported
+W:	http://ez.analog.com/community/linux-device-drivers
+F:	Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
+F:	Documentation/hwmon/max31827.rst
+F:	drivers/hwmon/max31827.c
+
 MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
 L:	linux-hwmon@vger.kernel.org
 S:	Orphan
@@ -12850,6 +12918,13 @@ F:	Documentation/devicetree/bindings/net/ieee802154/mcr20a.txt
 F:	drivers/net/ieee802154/mcr20a.c
 F:	drivers/net/ieee802154/mcr20a.h
 
+MDIO REGMAP DRIVER
+M:	Maxime Chevallier <maxime.chevallier@bootlin.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/mdio/mdio-regmap.c
+F:	include/linux/mdio/mdio-regmap.h
+
 MEASUREMENT COMPUTING CIO-DAC IIO DRIVER
 M:	William Breathitt Gray <william.gray@linaro.org>
 L:	linux-iio@vger.kernel.org
@@ -13149,6 +13224,15 @@ S:	Maintained
 F:	drivers/net/pcs/pcs-mtk-lynxi.c
 F:	include/linux/pcs/pcs-mtk-lynxi.h
 
+MEDIATEK ETHERNET PHY DRIVERS
+M:	Daniel Golle <daniel@makrotopia.org>
+M:	Qingfang Deng <dqfext@gmail.com>
+M:	SkyLake Huang <SkyLake.Huang@mediatek.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/phy/mediatek-ge-soc.c
+F:	drivers/net/phy/mediatek-ge.c
+
 MEDIATEK I2C CONTROLLER DRIVER
 M:	Qii Wang <qii.wang@mediatek.com>
 L:	linux-i2c@vger.kernel.org
@@ -13210,6 +13294,7 @@ R:	Shayne Chen <shayne.chen@mediatek.com>
 R:	Sean Wang <sean.wang@mediatek.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
+T:	git https://github.com/nbd168/wireless
 F:	Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
 F:	drivers/net/wireless/mediatek/mt76/
 
@@ -13244,6 +13329,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml
 F:	drivers/i2c/busses/i2c-mt7621.c
 
+MEDIATEK MTMIPS CLOCK DRIVER
+M:	Sergio Paracuellos <sergio.paracuellos@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
+F:	drivers/clk/ralink/clk-mtmips.c
+
 MEDIATEK NAND CONTROLLER DRIVER
 L:	linux-mtd@lists.infradead.org
 S:	Orphan
@@ -13639,6 +13730,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi.git
 F:	Documentation/ABI/stable/sysfs-bus-mhi
 F:	Documentation/mhi/
 F:	drivers/bus/mhi/
+F:	drivers/pci/endpoint/functions/pci-epf-mhi.c
 F:	include/linux/mhi.h
 
 MICROBLAZE ARCHITECTURE
@@ -13695,7 +13787,7 @@ F:	Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
 F:	drivers/spi/spi-at91-usart.c
 
 MICROCHIP AUDIO ASOC DRIVERS
-M:	Claudiu Beznea <claudiu.beznea@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@tuxon.dev>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	Documentation/devicetree/bindings/sound/atmel*
@@ -13718,9 +13810,10 @@ S:	Maintained
 F:	drivers/crypto/atmel-ecc.*
 
 MICROCHIP EIC DRIVER
-M:	Claudiu Beznea <claudiu.beznea@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@tuxon.dev>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
+F:	Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml
 F:	drivers/irqchip/irq-mchp-eic.c
 
 MICROCHIP I2C DRIVER
@@ -13790,7 +13883,7 @@ F:	drivers/video/fbdev/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
 MICROCHIP MCP16502 PMIC DRIVER
-M:	Claudiu Beznea <claudiu.beznea@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@tuxon.dev>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
@@ -13817,7 +13910,7 @@ F:	Documentation/devicetree/bindings/mtd/atmel-nand.txt
 F:	drivers/mtd/nand/raw/atmel/*
 
 MICROCHIP OTPC DRIVER
-M:	Claudiu Beznea <claudiu.beznea@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@tuxon.dev>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
@@ -13856,7 +13949,7 @@ F:	Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
 F:	drivers/fpga/microchip-spi.c
 
 MICROCHIP PWM DRIVER
-M:	Claudiu Beznea <claudiu.beznea@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@tuxon.dev>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-pwm@vger.kernel.org
 S:	Supported
@@ -13872,8 +13965,9 @@ F:	drivers/iio/adc/at91-sama5d2_adc.c
 F:	include/dt-bindings/iio/adc/at91-sama5d2_adc.h
 
 MICROCHIP SAMA5D2-COMPATIBLE SHUTDOWN CONTROLLER
-M:	Claudiu Beznea <claudiu.beznea@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@tuxon.dev>
 S:	Supported
+F:	Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
 F:	drivers/power/reset/at91-sama5d2_shdwc.c
 
 MICROCHIP SOC DRIVERS
@@ -13883,12 +13977,12 @@ T:	git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
 F:	drivers/soc/microchip/
 
 MICROCHIP SPI DRIVER
-M:	Tudor Ambarus <tudor.ambarus@linaro.org>
+M:	Ryan Wanner <ryan.wanner@microchip.com>
 S:	Supported
 F:	drivers/spi/spi-atmel.*
 
 MICROCHIP SSC DRIVER
-M:	Claudiu Beznea <claudiu.beznea@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@tuxon.dev>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -13917,7 +14011,7 @@ F:	drivers/usb/gadget/udc/atmel_usba_udc.*
 
 MICROCHIP WILC1000 WIFI DRIVER
 M:	Ajay Singh <ajay.kathat@microchip.com>
-M:	Claudiu Beznea <claudiu.beznea@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@tuxon.dev>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 F:	drivers/net/wireless/microchip/wilc1000/
@@ -14047,12 +14141,12 @@ MIKROTIK CRS3XX 98DX3236 BOARD SUPPORT
 M:	Luka Kovacic <luka.kovacic@sartura.hr>
 M:	Luka Perkov <luka.perkov@sartura.hr>
 S:	Maintained
-F:	arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
-F:	arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts
-F:	arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
-F:	arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts
-F:	arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
-F:	arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts
+F:	arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s-bit.dts
+F:	arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dts
+F:	arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s-bit.dts
+F:	arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dts
+F:	arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s-bit.dts
+F:	arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dts
 
 MIPI CCS, SMIA AND SMIA++ IMAGE SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
@@ -14155,7 +14249,7 @@ R:	Lubomir Rintel <lkundrak@v3.sk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Odd Fixes
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp.git
-F:	arch/arm/boot/dts/mmp*
+F:	arch/arm/boot/dts/marvell/mmp*
 F:	arch/arm/mach-mmp/
 F:	include/linux/soc/mmp/
 
@@ -14583,7 +14677,6 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 F:	Documentation/devicetree/bindings/net/
 F:	drivers/connector/
 F:	drivers/net/
-X:	drivers/net/wireless/
 F:	include/dt-bindings/net/
 F:	include/linux/etherdevice.h
 F:	include/linux/fcdevice.h
@@ -14594,6 +14687,7 @@ F:	include/linux/inetdevice.h
 F:	include/linux/netdevice.h
 F:	include/uapi/linux/if_*
 F:	include/uapi/linux/netdevice.h
+X:	drivers/net/wireless/
 
 NETWORKING DRIVERS (WIRELESS)
 M:	Kalle Valo <kvalo@kernel.org>
@@ -14648,9 +14742,9 @@ F:	include/uapi/linux/netdevice.h
 F:	lib/net_utils.c
 F:	lib/random32.c
 F:	net/
-X:	net/bluetooth/
 F:	tools/net/
 F:	tools/testing/selftests/net/
+X:	net/bluetooth/
 
 NETWORKING [IPSEC]
 M:	Steffen Klassert <steffen.klassert@secunet.com>
@@ -14695,7 +14789,7 @@ NETWORKING [LABELED] (NetLabel, Labeled IPsec, SECMARK)
 M:	Paul Moore <paul@paul-moore.com>
 L:	netdev@vger.kernel.org
 L:	linux-security-module@vger.kernel.org
-S:	Maintained
+S:	Supported
 W:	https://github.com/netlabel
 F:	Documentation/netlabel/
 F:	include/net/calipso.h
@@ -14731,6 +14825,7 @@ NETWORKING [TCP]
 M:	Eric Dumazet <edumazet@google.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
+F:	include/linux/net_mm.h
 F:	include/linux/tcp.h
 F:	include/net/tcp.h
 F:	include/trace/events/tcp.h
@@ -14924,7 +15019,7 @@ M:	Allen Hubbe <allenbh@gmail.com>
 L:	ntb@lists.linux.dev
 S:	Supported
 W:	https://github.com/jonmason/ntb/wiki
-T:	git git://github.com/jonmason/ntb.git
+T:	git https://github.com/jonmason/ntb.git
 F:	drivers/net/ntb_netdev.c
 F:	drivers/ntb/
 F:	drivers/pci/endpoint/functions/pci-epf-*ntb.c
@@ -15287,19 +15382,13 @@ M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 L:	devicetree@vger.kernel.org
 S:	Maintained
-F:	arch/arm/boot/dts/*am3*
-F:	arch/arm/boot/dts/*am4*
-F:	arch/arm/boot/dts/*am5*
-F:	arch/arm/boot/dts/*dra7*
-F:	arch/arm/boot/dts/*omap*
-F:	arch/arm/boot/dts/logicpd-som-lv*
-F:	arch/arm/boot/dts/logicpd-torpedo*
+F:	arch/arm/boot/dts/ti/omap/
 
 OMAP DISPLAY SUBSYSTEM and FRAMEBUFFER SUPPORT (DSS2)
 L:	linux-omap@vger.kernel.org
 L:	linux-fbdev@vger.kernel.org
 S:	Orphan
-F:	Documentation/arm/omap/dss.rst
+F:	Documentation/arch/arm/omap/dss.rst
 F:	drivers/video/fbdev/omap2/
 
 OMAP FRAMEBUFFER SUPPORT
@@ -15401,7 +15490,7 @@ OMAP/NEWFLOW NANOBONE MACHINE SUPPORT
 M:	Mark Jackson <mpfj@newflow.co.uk>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
-F:	arch/arm/boot/dts/am335x-nano.dts
+F:	arch/arm/boot/dts/ti/omap/am335x-nano.dts
 
 OMAP1 SUPPORT
 M:	Aaro Koskinen <aaro.koskinen@iki.fi>
@@ -15428,6 +15517,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
 F:	arch/arm/configs/omap2plus_defconfig
 F:	arch/arm/mach-omap2/
 F:	drivers/bus/ti-sysc.c
+F:	drivers/gpio/gpio-tps65219.c
 F:	drivers/i2c/busses/i2c-omap.c
 F:	drivers/irqchip/irq-omap-intc.c
 F:	drivers/mfd/*omap*.c
@@ -15465,6 +15555,13 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/i2c/og01a1b.c
 
+OMNIVISION OV01A10 SENSOR DRIVER
+M:	Bingbu Cao <bingbu.cao@intel.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	drivers/media/i2c/ov01a10.c
+
 OMNIVISION OV02A10 SENSOR DRIVER
 M:	Dongchun Zhu <dongchun.zhu@mediatek.com>
 L:	linux-media@vger.kernel.org
@@ -15813,7 +15910,7 @@ ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
 M:	Mark Fasheh <mark@fasheh.com>
 M:	Joel Becker <jlbec@evilplan.org>
 M:	Joseph Qi <joseph.qi@linux.alibaba.com>
-L:	ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
+L:	ocfs2-devel@lists.linux.dev
 S:	Supported
 W:	http://ocfs2.wiki.kernel.org
 F:	Documentation/filesystems/dlmfs.rst
@@ -15848,6 +15945,7 @@ F:	include/media/i2c/ov2659.h
 
 OVERLAY FILESYSTEM
 M:	Miklos Szeredi <miklos@szeredi.hu>
+M:	Amir Goldstein <amir73il@gmail.com>
 L:	linux-unionfs@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs.git
@@ -15950,7 +16048,7 @@ F:	include/uapi/linux/ppdev.h
 
 PARAVIRT_OPS INTERFACE
 M:	Juergen Gross <jgross@suse.com>
-M:	Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
+R:	Ajay Kaher <akaher@vmware.com>
 R:	Alexey Makhalov <amakhalov@vmware.com>
 R:	VMware PV-Drivers Reviewers <pv-drivers@vmware.com>
 L:	virtualization@lists.linux-foundation.org
@@ -16196,6 +16294,7 @@ F:	drivers/pci/controller/dwc/pci-exynos.c
 PCI DRIVER FOR SYNOPSYS DESIGNWARE
 M:	Jingoo Han <jingoohan1@gmail.com>
 M:	Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
@@ -16466,6 +16565,10 @@ S:	Maintained
 F:	crypto/pcrypt.c
 F:	include/crypto/pcrypt.h
 
+PDS DSC VIRTIO DATA PATH ACCELERATOR
+R:	Shannon Nelson <shannon.nelson@amd.com>
+F:	drivers/vdpa/pds/
+
 PECI HARDWARE MONITORING DRIVERS
 M:	Iwona Winiarska <iwona.winiarska@intel.com>
 L:	linux-hwmon@vger.kernel.org
@@ -16693,7 +16796,7 @@ PIN CONTROLLER - QUALCOMM
 M:	Bjorn Andersson <andersson@kernel.org>
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/pinctrl/qcom,*.txt
+F:	Documentation/devicetree/bindings/pinctrl/qcom,*
 F:	drivers/pinctrl/qcom/
 
 PIN CONTROLLER - RENESAS
@@ -17148,7 +17251,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://github.com/hzhuang1/linux.git
 T:	git git://github.com/rjarzmik/linux.git
-F:	arch/arm/boot/dts/pxa*
+F:	arch/arm/boot/dts/intel/pxa/
 F:	arch/arm/mach-pxa/
 F:	drivers/dma/pxa*
 F:	drivers/pcmcia/pxa2xx*
@@ -17186,6 +17289,7 @@ F:	sound/soc/codecs/wcd9335.*
 F:	sound/soc/codecs/wcd934x.c
 F:	sound/soc/codecs/wsa881x.c
 F:	sound/soc/codecs/wsa883x.c
+F:	sound/soc/codecs/wsa884x.c
 F:	sound/soc/qcom/
 
 QCOM EMBEDDED USB DEBUGGER (EUD)
@@ -17342,6 +17446,7 @@ F:	drivers/media/tuners/qt1010*
 
 QUALCOMM ATH12K WIRELESS DRIVER
 M:	Kalle Valo <kvalo@kernel.org>
+M:	Jeff Johnson <quic_jjohnson@quicinc.com>
 L:	ath12k@lists.infradead.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
@@ -17349,6 +17454,7 @@ F:	drivers/net/wireless/ath/ath12k/
 
 QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
 M:	Kalle Valo <kvalo@kernel.org>
+M:	Jeff Johnson <quic_jjohnson@quicinc.com>
 L:	ath10k@lists.infradead.org
 S:	Supported
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
@@ -17358,8 +17464,11 @@ F:	drivers/net/wireless/ath/ath10k/
 
 QUALCOMM ATHEROS ATH11K WIRELESS DRIVER
 M:	Kalle Valo <kvalo@kernel.org>
+M:	Jeff Johnson <quic_jjohnson@quicinc.com>
 L:	ath11k@lists.infradead.org
 S:	Supported
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath11k
+B:	https://wireless.wiki.kernel.org/en/users/Drivers/ath11k/bugreport
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
 F:	Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
 F:	drivers/net/wireless/ath/ath11k/
@@ -17369,6 +17478,7 @@ M:	Toke Høiland-Jørgensen <toke@toke.dk>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath9k
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
 F:	Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
 F:	drivers/net/wireless/ath/ath9k/
 
@@ -17401,6 +17511,8 @@ F:	include/dt-bindings/clock/qcom,*
 
 QUALCOMM CLOUD AI (QAIC) DRIVER
 M:	Jeffrey Hugo <quic_jhugo@quicinc.com>
+R:	Carl Vanderlip <quic_carlv@quicinc.com>
+R:	Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
 L:	linux-arm-msm@vger.kernel.org
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
@@ -17444,6 +17556,7 @@ QUALCOMM ETHQOS ETHERNET DRIVER
 M:	Vinod Koul <vkoul@kernel.org>
 R:	Bhupesh Sharma <bhupesh.sharma@linaro.org>
 L:	netdev@vger.kernel.org
+L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/qcom,ethqos.yaml
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -17553,9 +17666,18 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
 F:	drivers/thermal/qcom/
 
+QUALCOMM TYPEC PORT MANAGER DRIVER
+M:	Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+L:	linux-arm-msm@vger.kernel.org
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/usb/qcom,pmic-*.yaml
+F:	drivers/usb/typec/tcpm/qcom/
+
 QUALCOMM VENUS VIDEO ACCELERATOR DRIVER
 M:	Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
 M:	Vikash Garodia <quic_vgarodia@quicinc.com>
+R:	Bryan O'Donoghue <bryan.odonoghue@linaro.org>
 L:	linux-media@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
@@ -17798,7 +17920,7 @@ M:	Boqun Feng <boqun.feng@gmail.com>
 R:	Steven Rostedt <rostedt@goodmis.org>
 R:	Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
 R:	Lai Jiangshan <jiangshanlai@gmail.com>
-R:	Zqiang <qiang1.zhang@intel.com>
+R:	Zqiang <qiang.zhang1211@gmail.com>
 L:	rcu@vger.kernel.org
 S:	Supported
 W:	http://www.rdrop.com/users/paulmck/RCU/
@@ -17863,7 +17985,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.g
 F:	drivers/net/wireless/realtek/rtlwifi/
 
 REALTEK WIRELESS DRIVER (rtw88)
-M:	Yan-Hsuan Chuang <tony0620emma@gmail.com>
+M:	Ping-Ke Shih <pkshih@realtek.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/realtek/rtw88/
@@ -18070,6 +18192,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml
 F:	drivers/clk/clk-versaclock7.c
 
+RENESAS X9250 DIGITAL POTENTIOMETERS DRIVER
+M:	Herve Codina <herve.codina@bootlin.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml
+F:	drivers/iio/potentiometer/x9250.c
+
 RESET CONTROLLER FRAMEWORK
 M:	Philipp Zabel <p.zabel@pengutronix.de>
 S:	Maintained
@@ -18165,6 +18294,7 @@ F:	drivers/clk/microchip/clk-mpfs*.c
 F:	drivers/i2c/busses/i2c-microchip-corei2c.c
 F:	drivers/mailbox/mailbox-mpfs.c
 F:	drivers/pci/controller/pcie-microchip-host.c
+F:	drivers/pwm/pwm-microchip-core.c
 F:	drivers/reset/reset-mpfs.c
 F:	drivers/rtc/rtc-mpfs.c
 F:	drivers/soc/microchip/mpfs-sys-controller.c
@@ -18181,6 +18311,8 @@ Q:	https://patchwork.kernel.org/project/linux-riscv/list/
 T:	git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
 F:	Documentation/devicetree/bindings/riscv/
 F:	arch/riscv/boot/dts/
+X:	arch/riscv/boot/dts/allwinner/
+X:	arch/riscv/boot/dts/renesas/
 
 RISC-V PMU DRIVERS
 M:	Atish Patra <atishp@atishpatra.org>
@@ -18191,6 +18323,14 @@ F:	drivers/perf/riscv_pmu.c
 F:	drivers/perf/riscv_pmu_legacy.c
 F:	drivers/perf/riscv_pmu_sbi.c
 
+RISC-V THEAD SoC SUPPORT
+M:	Jisheng Zhang <jszhang@kernel.org>
+M:	Guo Ren <guoren@kernel.org>
+M:	Fu Wei <wefu@redhat.com>
+L:	linux-riscv@lists.infradead.org
+S:	Maintained
+F:	arch/riscv/boot/dts/thead/
+
 RNBD BLOCK DRIVERS
 M:	Md. Haris Iqbal <haris.iqbal@ionos.com>
 M:	Jack Wang <jinpu.wang@ionos.com>
@@ -18227,7 +18367,7 @@ L:	linux-rockchip@lists.infradead.org
 S:	Maintained
 F:	Documentation/admin-guide/media/rkisp1.rst
 F:	Documentation/devicetree/bindings/media/rockchip-isp1.yaml
-F:	Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst
+F:	Documentation/userspace-api/media/v4l/metafmt-rkisp1.rst
 F:	drivers/media/platform/rockchip/rkisp1
 F:	include/uapi/linux/rkisp1-config.h
 
@@ -18272,10 +18412,11 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/iio/light/bh1750.yaml
 F:	drivers/iio/light/bh1750.c
 
-ROHM BU27034 AMBIENT LIGHT SENSOR DRIVER
+ROHM BU270xx LIGHT SENSOR DRIVERs
 M:	Matti Vaittinen <mazziesaccount@gmail.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
+F:	drivers/iio/light/rohm-bu27008.c
 F:	drivers/iio/light/rohm-bu27034.c
 
 ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS
@@ -18369,17 +18510,14 @@ RTL8180 WIRELESS DRIVER
 L:	linux-wireless@vger.kernel.org
 S:	Orphan
 W:	https://wireless.wiki.kernel.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 F:	drivers/net/wireless/realtek/rtl818x/rtl8180/
 
 RTL8187 WIRELESS DRIVER
-M:	Herton Ronaldo Krzesinski <herton@canonical.com>
-M:	Hin-Tak Leung <htl10@users.sourceforge.net>
+M:	Hin-Tak Leung <hintak.leung@gmail.com>
 M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 W:	https://wireless.wiki.kernel.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 F:	drivers/net/wireless/realtek/rtl818x/rtl8187/
 
 RTL8XXXU WIRELESS DRIVER (rtl8xxxu)
@@ -18774,7 +18912,7 @@ SANCLOUD BEAGLEBONE ENHANCED DEVICE TREE
 M:	Paul Barker <paul.barker@sancloud.com>
 R:	Marc Murphy <marc.murphy@sancloud.com>
 S:	Supported
-F:	arch/arm/boot/dts/am335x-sancloud*
+F:	arch/arm/boot/dts/ti/omap/am335x-sancloud*
 
 SC1200 WDT DRIVER
 M:	Zwane Mwaikambo <zwanem@gmail.com>
@@ -18801,6 +18939,16 @@ F:	include/linux/wait.h
 F:	include/uapi/linux/sched.h
 F:	kernel/sched/
 
+SCSI LIBSAS SUBSYSTEM
+R:	John Garry <john.g.garry@oracle.com>
+R:	Jason Yan <yanaijie@huawei.com>
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+F:	Documentation/scsi/libsas.rst
+F:	drivers/scsi/libsas/
+F:	include/scsi/libsas.h
+F:	include/scsi/sas_ata.h
+
 SCSI RDMA PROTOCOL (SRP) INITIATOR
 M:	Bart Van Assche <bvanassche@acm.org>
 L:	linux-rdma@vger.kernel.org
@@ -18929,7 +19077,7 @@ K:	\bsecure_computing
 K:	\bTIF_SECCOMP\b
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) Broadcom BRCMSTB DRIVER
-M:	Kamal Dasu <kdasu.kdev@gmail.com>
+M:	Kamal Dasu <kamal.dasu@broadcom.com>
 M:	Al Cooper <alcooperx@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-mmc@vger.kernel.org
@@ -19076,13 +19224,6 @@ F:	Documentation/devicetree/bindings/serial/serial.yaml
 F:	drivers/tty/serdev/
 F:	include/linux/serdev.h
 
-SERIAL DRIVERS
-M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-L:	linux-serial@vger.kernel.org
-S:	Maintained
-F:	Documentation/devicetree/bindings/serial/
-F:	drivers/tty/serial/
-
 SERIAL IR RECEIVER
 M:	Sean Young <sean@mess.org>
 L:	linux-media@vger.kernel.org
@@ -19603,15 +19744,15 @@ F:	include/uapi/linux/raid/
 SOLIDRUN CLEARFOG SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
-F:	arch/arm/boot/dts/armada-388-clearfog*
-F:	arch/arm/boot/dts/armada-38x-solidrun-*
+F:	arch/arm/boot/dts/marvell/armada-388-clearfog*
+F:	arch/arm/boot/dts/marvell/armada-38x-solidrun-*
 
 SOLIDRUN CUBOX-I/HUMMINGBOARD SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
-F:	arch/arm/boot/dts/imx6*-cubox-i*
-F:	arch/arm/boot/dts/imx6*-hummingboard*
-F:	arch/arm/boot/dts/imx6*-sr-*
+F:	arch/arm/boot/dts/nxp/imx/imx6*-cubox-i*
+F:	arch/arm/boot/dts/nxp/imx/imx6*-hummingboard*
+F:	arch/arm/boot/dts/nxp/imx/imx6*-sr-*
 
 SONIC NETWORK DRIVER
 M:	Thomas Bogendoerfer <tsbogend@alpha.franken.de>
@@ -19896,7 +20037,7 @@ M:	soc@kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 W:	http://www.st.com/spear
-F:	arch/arm/boot/dts/spear*
+F:	arch/arm/boot/dts/st/spear*
 F:	arch/arm/mach-spear/
 F:	drivers/clk/spear/
 F:	drivers/pinctrl/spear/
@@ -20109,6 +20250,13 @@ M:	Ion Badulescu <ionut@badula.org>
 S:	Odd Fixes
 F:	drivers/net/ethernet/adaptec/starfire*
 
+STARFIVE CRYPTO DRIVER
+M:	Jia Jie Ho <jiajie.ho@starfivetech.com>
+M:	William Qiu <william.qiu@starfivetech.com>
+S:	Supported
+F:	Documentation/devicetree/bindings/crypto/starfive*
+F:	drivers/crypto/starfive/
+
 STARFIVE DEVICETREES
 M:	Emil Renner Berthing <kernel@esmil.dk>
 S:	Maintained
@@ -20127,6 +20275,12 @@ S:	Supported
 F:	Documentation/devicetree/bindings/mmc/starfive*
 F:	drivers/mmc/host/dw_mmc-starfive.c
 
+STARFIVE JH7110 TDM DRIVER
+M:	Walker Chen <walker.chen@starfivetech.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
+F:	sound/soc/starfive/jh7110_tdm.c
+
 STARFIVE JH71X0 CLOCK DRIVERS
 M:	Emil Renner Berthing <kernel@esmil.dk>
 M:	Hal Feng <hal.feng@starfivetech.com>
@@ -20153,6 +20307,12 @@ F:	Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
 F:	drivers/reset/starfive/reset-starfive-jh71*
 F:	include/dt-bindings/reset/starfive?jh71*.h
 
+STARFIVE JH71X0 USB DRIVERS
+M:	Minda Chen <minda.chen@starfivetech.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
+F:	drivers/usb/cdns3/cdns3-starfive.c
+
 STARFIVE JH71XX PMU CONTROLLER DRIVER
 M:	Walker Chen <walker.chen@starfivetech.com>
 S:	Supported
@@ -20234,7 +20394,6 @@ F:	drivers/pwm/pwm-stm32*
 F:	include/linux/*/stm32-*tim*
 
 STMMAC ETHERNET DRIVER
-M:	Giuseppe Cavallaro <peppe.cavallaro@st.com>
 M:	Alexandre Torgue <alexandre.torgue@foss.st.com>
 M:	Jose Abreu <joabreu@synopsys.com>
 L:	netdev@vger.kernel.org
@@ -20846,10 +21005,13 @@ TEGRA VIDEO DRIVER
 M:	Thierry Reding <thierry.reding@gmail.com>
 M:	Jonathan Hunter <jonathanh@nvidia.com>
 M:	Sowjanya Komatineni <skomatineni@nvidia.com>
+M:	Luca Ceresoli <luca.ceresoli@bootlin.com>
 L:	linux-media@vger.kernel.org
 L:	linux-tegra@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
+F:	Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
+F:	Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml
 F:	drivers/staging/media/tegra-video/
 
 TEGRA XUSB PADCTL DRIVER
@@ -21104,7 +21266,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git
 F:	Documentation/devicetree/bindings/i2c/i2c-davinci.txt
-F:	arch/arm/boot/dts/da850*
+F:	arch/arm/boot/dts/ti/davinci/
 F:	arch/arm/mach-davinci/
 F:	drivers/i2c/busses/i2c-davinci.c
 
@@ -21466,14 +21628,16 @@ W:	https://github.com/srcres258/linux-doc
 T:	git git://github.com/srcres258/linux-doc.git doc-zh-tw
 F:	Documentation/translations/zh_TW/
 
-TTY LAYER
+TTY LAYER AND SERIAL DRIVERS
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 M:	Jiri Slaby <jirislaby@kernel.org>
+L:	linux-kernel@vger.kernel.org
+L:	linux-serial@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
+F:	Documentation/devicetree/bindings/serial/
 F:	Documentation/driver-api/serial/
 F:	drivers/tty/
-F:	drivers/tty/serial/serial_core.c
 F:	include/linux/selection.h
 F:	include/linux/serial.h
 F:	include/linux/serial_core.h
@@ -21502,11 +21666,14 @@ S:	Orphan
 F:	drivers/net/ethernet/dec/tulip/
 
 TUN/TAP driver
-M:	Maxim Krasnyansky <maxk@qti.qualcomm.com>
+M:	Willem de Bruijn <willemdebruijn.kernel@gmail.com>
+M:	Jason Wang <jasowang@redhat.com>
 S:	Maintained
 W:	http://vtun.sourceforge.net/tun
 F:	Documentation/networking/tuntap.rst
 F:	arch/um/os-Linux/drivers/
+F:	drivers/net/tap.c
+F:	drivers/net/tun.c
 
 TURBOCHANNEL SUBSYSTEM
 M:	"Maciej W. Rozycki" <macro@orcam.me.uk>
@@ -21729,9 +21896,8 @@ S:	Maintained
 F:	drivers/usb/misc/apple-mfi-fastcharge.c
 
 USB AR5523 WIRELESS DRIVER
-M:	Pontus Fuchs <pontus.fuchs@gmail.com>
 L:	linux-wireless@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/net/wireless/ath/ar5523/
 
 USB ATTACHED SCSI
@@ -21944,6 +22110,7 @@ F:	drivers/usb/
 F:	include/dt-bindings/usb/
 F:	include/linux/usb.h
 F:	include/linux/usb/
+F:	include/uapi/linux/usb/
 
 USB TYPEC BUS FOR ALTERNATE MODES
 M:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
@@ -22007,9 +22174,8 @@ F:	drivers/usb/gadget/legacy/webcam.c
 F:	include/uapi/linux/usb/g_uvc.h
 
 USB WIRELESS RNDIS DRIVER (rndis_wlan)
-M:	Jussi Kivilinna <jussi.kivilinna@iki.fi>
 L:	linux-wireless@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/net/wireless/legacy/rndis_wlan.c
 
 USB XHCI DRIVER
@@ -22118,6 +22284,13 @@ F:	Documentation/filesystems/vfat.rst
 F:	fs/fat/
 F:	tools/testing/selftests/filesystems/fat/
 
+VFIO CDX DRIVER
+M:	Nipun Gupta <nipun.gupta@amd.com>
+M:	Nikhil Agarwal <nikhil.agarwal@amd.com>
+L:	kvm@vger.kernel.org
+S:	Maintained
+F:	drivers/vfio/cdx/*
+
 VFIO DRIVER
 M:	Alex Williamson <alex.williamson@redhat.com>
 L:	kvm@vger.kernel.org
@@ -22199,7 +22372,6 @@ L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/fbdev/via/
 F:	include/linux/via-core.h
-F:	include/linux/via-gpio.h
 F:	include/linux/via_i2c.h
 
 VIA VELOCITY NETWORK DRIVER
@@ -22292,7 +22464,6 @@ L:	virtualization@lists.linux-foundation.org
 S:	Maintained
 F:	drivers/block/virtio_blk.c
 F:	drivers/scsi/virtio_scsi.c
-F:	drivers/vhost/scsi.c
 F:	include/uapi/linux/virtio_blk.h
 F:	include/uapi/linux/virtio_scsi.h
 
@@ -22391,6 +22562,16 @@ F:	include/linux/vhost_iotlb.h
 F:	include/uapi/linux/vhost.h
 F:	kernel/vhost_task.c
 
+VIRTIO HOST (VHOST-SCSI)
+M:	"Michael S. Tsirkin" <mst@redhat.com>
+M:	Jason Wang <jasowang@redhat.com>
+M:	Mike Christie <michael.christie@oracle.com>
+R:	Paolo Bonzini <pbonzini@redhat.com>
+R:	Stefan Hajnoczi <stefanha@redhat.com>
+L:	virtualization@lists.linux-foundation.org
+S:	Maintained
+F:	drivers/vhost/scsi.c
+
 VIRTIO I2C DRIVER
 M:	Conghui Chen <conghui.chen@intel.com>
 M:	Viresh Kumar <viresh.kumar@linaro.org>
@@ -22452,6 +22633,14 @@ L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	fs/vboxsf/*
 
+VIRTUAL PCM TEST DRIVER
+M:	Ivan Orlov <ivan.orlov0322@gmail.com>
+L:	alsa-devel@alsa-project.org
+S:	Maintained
+F:	Documentation/sound/cards/pcmtest.rst
+F:	sound/drivers/pcmtest.c
+F:	tools/testing/selftests/alsa/test-pcmtest-driver.c
+
 VIRTUAL SERIO DEVICE DRIVER
 M:	Stephen Chandler Paul <thatslyude@gmail.com>
 S:	Maintained
@@ -22522,7 +22711,7 @@ S:	Supported
 F:	drivers/misc/vmw_balloon.c
 
 VMWARE HYPERVISOR INTERFACE
-M:	Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
+M:	Ajay Kaher <akaher@vmware.com>
 M:	Alexey Makhalov <amakhalov@vmware.com>
 R:	VMware PV-Drivers Reviewers <pv-drivers@vmware.com>
 L:	virtualization@lists.linux-foundation.org
@@ -22549,8 +22738,8 @@ F:	drivers/scsi/vmw_pvscsi.c
 F:	drivers/scsi/vmw_pvscsi.h
 
 VMWARE VIRTUAL PTP CLOCK DRIVER
-M:	Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
 M:	Deep Shah <sdeep@vmware.com>
+R:	Ajay Kaher <akaher@vmware.com>
 R:	Alexey Makhalov <amakhalov@vmware.com>
 R:	VMware PV-Drivers Reviewers <pv-drivers@vmware.com>
 L:	netdev@vger.kernel.org
@@ -22770,9 +22959,16 @@ F:	drivers/input/misc/wistron_btns.c
 
 WL3501 WIRELESS PCMCIA CARD DRIVER
 L:	linux-wireless@vger.kernel.org
-S:	Odd fixes
+S:	Orphan
 F:	drivers/net/wireless/legacy/wl3501*
 
+WMI BINARY MOF DRIVER
+L:	platform-drivers-x86@vger.kernel.org
+S:	Orphan
+F:	Documentation/ABI/stable/sysfs-platform-wmi-bmof
+F:	Documentation/wmi/devices/wmi-bmof.rst
+F:	drivers/platform/x86/wmi-bmof.c
+
 WOLFSON MICROELECTRONICS DRIVERS
 L:	patches@opensource.cirrus.com
 S:	Supported
@@ -23152,8 +23348,9 @@ F:	Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
 F:	drivers/iio/adc/xilinx-ams.c
 
 XILINX AXI ETHERNET DRIVER
-M:	Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
+M:	Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 S:	Maintained
+F:	Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
 F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 
 XILINX CAN DRIVER
@@ -23171,8 +23368,8 @@ F:	drivers/soc/xilinx/xlnx_event_manager.c
 F:	include/linux/firmware/xlnx-event-manager.h
 
 XILINX GPIO DRIVER
-M:	Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
-R:	Srinivas Neeli <srinivas.neeli@xilinx.com>
+M:	Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+R:	Srinivas Neeli <srinivas.neeli@amd.com>
 R:	Michal Simek <michal.simek@amd.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
@@ -23187,8 +23384,8 @@ F:	drivers/pwm/pwm-xilinx.c
 F:	include/clocksource/timer-xilinx.h
 
 XILINX SD-FEC IP CORES
-M:	Derek Kiernan <derek.kiernan@xilinx.com>
-M:	Dragan Cvetic <dragan.cvetic@xilinx.com>
+M:	Derek Kiernan <derek.kiernan@amd.com>
+M:	Dragan Cvetic <dragan.cvetic@amd.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
 F:	Documentation/misc-devices/xilinx_sdfec.rst
@@ -23204,7 +23401,6 @@ S:	Maintained
 F:	drivers/tty/serial/uartlite.c
 
 XILINX VIDEO IP CORES
-M:	Hyun Kwon <hyun.kwon@xilinx.com>
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
@@ -23218,8 +23414,10 @@ M:	Srinivas Neeli <srinivas.neeli@amd.com>
 R:	Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
 R:	Michal Simek <michal.simek@amd.com>
 S:	Maintained
+F:	Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml
 F:	Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
 F:	drivers/watchdog/of_xilinx_wdt.c
+F:	drivers/watchdog/xilinx_wwdt.c
 
 XILINX XDMA DRIVER
 M:	Lizhi Hou <lizhi.hou@amd.com>
@@ -23233,7 +23431,6 @@ F:	include/linux/dma/amd_xdma.h
 F:	include/linux/platform_data/amd_xdma.h
 
 XILINX ZYNQMP DPDMA DRIVER
-M:	Hyun Kwon <hyun.kwon@xilinx.com>
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	dmaengine@vger.kernel.org
 S:	Supported
@@ -23249,7 +23446,6 @@ F:	Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yam
 F:	drivers/edac/zynqmp_edac.c
 
 XILINX ZYNQMP PSGTR PHY DRIVER
-M:	Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
@@ -23258,7 +23454,7 @@ F:	Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
 F:	drivers/phy/xilinx/phy-zynqmp.c
 
 XILINX ZYNQMP SHA3 DRIVER
-M:	Harsha <harsha.harsha@xilinx.com>
+M:	Harsha <harsha.harsha@amd.com>
 S:	Maintained
 F:	drivers/crypto/xilinx/zynqmp-sha.c
 
@@ -23334,11 +23530,8 @@ S:	Maintained
 F:	mm/zbud.c
 
 ZD1211RW WIRELESS DRIVER
-M:	Ulrich Kunitz <kune@deine-taler.de>
 L:	linux-wireless@vger.kernel.org
-L:	zd1211-devs@lists.sourceforge.net (subscribers-only)
-S:	Maintained
-W:	http://zd1211.ath.cx/wiki/DriverRewrite
+S:	Orphan
 F:	drivers/net/wireless/zydas/zd1211rw/
 
 ZD1301 MEDIA DRIVER
diff --git a/Makefile b/Makefile
index e51e4d9174ab3..4739c21a63e2e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
-PATCHLEVEL = 4
+PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION =
+EXTRAVERSION = -rc7
 NAME = Hurr durr I'ma ninja sloth
 
 # *DOCUMENTATION*
@@ -38,6 +38,10 @@ __all:
 # descending is started. They are now explicitly listed as the
 # prepare rule.
 
+this-makefile := $(lastword $(MAKEFILE_LIST))
+export abs_srctree := $(realpath $(dir $(this-makefile)))
+export abs_objtree := $(CURDIR)
+
 ifneq ($(sub_make_done),1)
 
 # Do not use make's built-in rules and variables
@@ -185,20 +189,8 @@ $(if $(abs_objtree),, \
 
 # $(realpath ...) resolves symlinks
 abs_objtree := $(realpath $(abs_objtree))
-else
-abs_objtree := $(CURDIR)
 endif # ifneq ($(KBUILD_OUTPUT),)
 
-ifeq ($(abs_objtree),$(CURDIR))
-# Suppress "Entering directory ..." unless we are changing the work directory.
-MAKEFLAGS += --no-print-directory
-else
-need-sub-make := 1
-endif
-
-this-makefile := $(lastword $(MAKEFILE_LIST))
-abs_srctree := $(realpath $(dir $(this-makefile)))
-
 ifneq ($(words $(subst :, ,$(abs_srctree))), 1)
 $(error source directory cannot contain spaces or colons)
 endif
@@ -211,9 +203,25 @@ need-sub-make := 1
 $(this-makefile): ;
 endif
 
-export abs_srctree abs_objtree
 export sub_make_done := 1
 
+endif # sub_make_done
+
+ifeq ($(abs_objtree),$(CURDIR))
+# Suppress "Entering directory ..." if we are at the final work directory.
+no-print-directory := --no-print-directory
+else
+# Recursion to show "Entering directory ..."
+need-sub-make := 1
+endif
+
+ifeq ($(filter --no-print-directory, $(MAKEFLAGS)),)
+# If --no-print-directory is unset, recurse once again to set it.
+# You may end up recursing into __sub-make twice. This is needed due to the
+# behavior change in GNU Make 4.4.1.
+need-sub-make := 1
+endif
+
 ifeq ($(need-sub-make),1)
 
 PHONY += $(MAKECMDGOALS) __sub-make
@@ -223,18 +231,12 @@ $(filter-out $(this-makefile), $(MAKECMDGOALS)) __all: __sub-make
 
 # Invoke a second make in the output directory, passing relevant variables
 __sub-make:
-	$(Q)$(MAKE) -C $(abs_objtree) -f $(abs_srctree)/Makefile $(MAKECMDGOALS)
+	$(Q)$(MAKE) $(no-print-directory) -C $(abs_objtree) \
+	-f $(abs_srctree)/Makefile $(MAKECMDGOALS)
 
-endif # need-sub-make
-endif # sub_make_done
+else # need-sub-make
 
 # We process the rest of the Makefile if this is the final invocation of make
-ifeq ($(need-sub-make),)
-
-# Do not print "Entering directory ...",
-# but we want to display it when entering to the output directory
-# so that IDEs/editors are able to understand relative filenames.
-MAKEFLAGS += --no-print-directory
 
 ifeq ($(abs_srctree),$(abs_objtree))
         # building in the source tree
@@ -447,8 +449,7 @@ HOSTRUSTC = rustc
 HOSTPKG_CONFIG	= pkg-config
 
 KBUILD_USERHOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \
-			 -O2 -fomit-frame-pointer -std=gnu11 \
-			 -Wdeclaration-after-statement
+			 -O2 -fomit-frame-pointer -std=gnu11
 KBUILD_USERCFLAGS  := $(KBUILD_USERHOSTCFLAGS) $(USERCFLAGS)
 KBUILD_USERLDFLAGS := $(USERLDFLAGS)
 
@@ -554,11 +555,23 @@ LINUXINCLUDE    := \
 		$(USERINCLUDE)
 
 KBUILD_AFLAGS   := -D__ASSEMBLY__ -fno-PIE
-KBUILD_CFLAGS   := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \
-		   -fno-strict-aliasing -fno-common -fshort-wchar -fno-PIE \
-		   -Werror=implicit-function-declaration -Werror=implicit-int \
-		   -Werror=return-type -Wno-format-security -funsigned-char \
-		   -std=gnu11
+
+KBUILD_CFLAGS :=
+KBUILD_CFLAGS += -std=gnu11
+KBUILD_CFLAGS += -fshort-wchar
+KBUILD_CFLAGS += -funsigned-char
+KBUILD_CFLAGS += -fno-common
+KBUILD_CFLAGS += -fno-PIE
+KBUILD_CFLAGS += -fno-strict-aliasing
+KBUILD_CFLAGS += -Wall
+KBUILD_CFLAGS += -Wundef
+KBUILD_CFLAGS += -Werror=implicit-function-declaration
+KBUILD_CFLAGS += -Werror=implicit-int
+KBUILD_CFLAGS += -Werror=return-type
+KBUILD_CFLAGS += -Werror=strict-prototypes
+KBUILD_CFLAGS += -Wno-format-security
+KBUILD_CFLAGS += -Wno-trigraphs
+
 KBUILD_CPPFLAGS := -D__KERNEL__
 KBUILD_RUSTFLAGS := $(rust_common_flags) \
 		    --target=$(objtree)/scripts/target.json \
@@ -1012,9 +1025,6 @@ endif
 # arch Makefile may override CC so keep this after arch Makefile is included
 NOSTDINC_FLAGS += -nostdinc
 
-# warn about C99 declaration after statement
-KBUILD_CFLAGS += -Wdeclaration-after-statement
-
 # Variable Length Arrays (VLAs) should not be used anywhere in the kernel
 KBUILD_CFLAGS += -Wvla
 
@@ -1026,6 +1036,12 @@ KBUILD_CFLAGS += -Wno-pointer-sign
 # globally built with -Wcast-function-type.
 KBUILD_CFLAGS += $(call cc-option, -Wcast-function-type)
 
+# To gain proper coverage for CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE,
+# the kernel uses only C99 flexible arrays for dynamically sized trailing
+# arrays. Enforce this for everything that may examine structure sizes and
+# perform bounds checking.
+KBUILD_CFLAGS += $(call cc-option, -fstrict-flex-arrays=3)
+
 # disable stringop warnings in gcc 8+
 KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
 
@@ -1193,28 +1209,12 @@ endif
 export KBUILD_VMLINUX_LIBS
 export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
 
-# Recurse until adjust_autoksyms.sh is satisfied
-PHONY += autoksyms_recursive
 ifdef CONFIG_TRIM_UNUSED_KSYMS
 # For the kernel to actually contain only the needed exported symbols,
 # we have to build modules as well to determine what those symbols are.
-# (this can be evaluated only once include/config/auto.conf has been included)
 KBUILD_MODULES := 1
-
-autoksyms_recursive: $(build-dir) modules.order
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
-	  "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive"
 endif
 
-autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h)
-
-quiet_cmd_autoksyms_h = GEN     $@
-      cmd_autoksyms_h = mkdir -p $(dir $@); \
-			$(CONFIG_SHELL) $(srctree)/scripts/gen_autoksyms.sh $@
-
-$(autoksyms_h):
-	$(call cmd,autoksyms_h)
-
 # '$(AR) mPi' needs 'T' to workaround the bug of llvm-ar <= 14
 quiet_cmd_ar_vmlinux.a = AR      $@
       cmd_ar_vmlinux.a = \
@@ -1223,7 +1223,7 @@ quiet_cmd_ar_vmlinux.a = AR      $@
 	$(AR) mPiT $$($(AR) t $@ | sed -n 1p) $@ $$($(AR) t $@ | grep -F -f $(srctree)/scripts/head-object-list.txt)
 
 targets += vmlinux.a
-vmlinux.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt autoksyms_recursive FORCE
+vmlinux.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt FORCE
 	$(call if_changed,ar_vmlinux.a)
 
 PHONY += vmlinux_o
@@ -1279,7 +1279,7 @@ scripts: scripts_basic scripts_dtc
 PHONY += prepare archprepare
 
 archprepare: outputmakefile archheaders archscripts scripts include/config/kernel.release \
-	asm-generic $(version_h) $(autoksyms_h) include/generated/utsrelease.h \
+	asm-generic $(version_h) include/generated/utsrelease.h \
 	include/generated/compile.h include/generated/autoconf.h remove-stale-files
 
 prepare0: archprepare
@@ -1561,6 +1561,8 @@ modules_sign_only := y
 endif
 endif
 
+endif # CONFIG_MODULES
+
 modinst_pre :=
 ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
 modinst_pre := __modinst_pre
@@ -1571,18 +1573,18 @@ PHONY += __modinst_pre
 __modinst_pre:
 	@rm -rf $(MODLIB)/kernel
 	@rm -f $(MODLIB)/source
-	@mkdir -p $(MODLIB)/kernel
+	@mkdir -p $(MODLIB)
+ifdef CONFIG_MODULES
 	@ln -s $(abspath $(srctree)) $(MODLIB)/source
 	@if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
 		rm -f $(MODLIB)/build ; \
 		ln -s $(CURDIR) $(MODLIB)/build ; \
 	fi
 	@sed 's:^\(.*\)\.o$$:kernel/\1.ko:' modules.order > $(MODLIB)/modules.order
+endif
 	@cp -f modules.builtin $(MODLIB)/
 	@cp -f $(objtree)/modules.builtin.modinfo $(MODLIB)/
 
-endif # CONFIG_MODULES
-
 ###
 # Cleaning is done on three levels.
 # make clean     Delete most generated files
@@ -1924,6 +1926,13 @@ help:
 	@echo  '  clean           - remove generated files in module directory only'
 	@echo  ''
 
+__external_modules_error:
+	@echo >&2 '***'
+	@echo >&2 '*** The present kernel disabled CONFIG_MODULES.'
+	@echo >&2 '*** You cannot build or install external modules.'
+	@echo >&2 '***'
+	@false
+
 endif # KBUILD_EXTMOD
 
 # ---------------------------------------------------------------------------
@@ -1960,13 +1969,10 @@ else # CONFIG_MODULES
 # Modules not configured
 # ---------------------------------------------------------------------------
 
-modules modules_install:
-	@echo >&2 '***'
-	@echo >&2 '*** The present kernel configuration has modules disabled.'
-	@echo >&2 '*** To use the module feature, please run "make menuconfig" etc.'
-	@echo >&2 '*** to enable CONFIG_MODULES.'
-	@echo >&2 '***'
-	@exit 1
+PHONY += __external_modules_error
+
+modules modules_install: __external_modules_error
+	@:
 
 KBUILD_MODULES :=
 
@@ -2039,7 +2045,7 @@ clean: $(clean-dirs)
 		-o -name '*.dtb.S' -o -name '*.dtbo.S' \
 		-o -name '*.dt.yaml' \
 		-o -name '*.dwo' -o -name '*.lst' \
-		-o -name '*.su' -o -name '*.mod' -o -name '*.usyms' \
+		-o -name '*.su' -o -name '*.mod' \
 		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
 		-o -name '*.lex.c' -o -name '*.tab.[ch]' \
 		-o -name '*.asn1.[ch]' \
diff --git a/arch/Kconfig b/arch/Kconfig
index 205fd23e0cada..aff2746c8af28 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -34,6 +34,29 @@ config ARCH_HAS_SUBPAGE_FAULTS
 config HOTPLUG_SMT
 	bool
 
+# Selected by HOTPLUG_CORE_SYNC_DEAD or HOTPLUG_CORE_SYNC_FULL
+config HOTPLUG_CORE_SYNC
+	bool
+
+# Basic CPU dead synchronization selected by architecture
+config HOTPLUG_CORE_SYNC_DEAD
+	bool
+	select HOTPLUG_CORE_SYNC
+
+# Full CPU synchronization with alive state selected by architecture
+config HOTPLUG_CORE_SYNC_FULL
+	bool
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
+	select HOTPLUG_CORE_SYNC
+
+config HOTPLUG_SPLIT_STARTUP
+	bool
+	select HOTPLUG_CORE_SYNC_FULL
+
+config HOTPLUG_PARALLEL
+	bool
+	select HOTPLUG_SPLIT_STARTUP
+
 config GENERIC_ENTRY
 	bool
 
@@ -285,6 +308,9 @@ config ARCH_HAS_DMA_SET_UNCACHED
 config ARCH_HAS_DMA_CLEAR_UNCACHED
 	bool
 
+config ARCH_HAS_CPU_FINALIZE_INIT
+	bool
+
 # Select if arch init_task must go in the __init_task_data section
 config ARCH_TASK_STRUCT_ON_STACK
 	bool
@@ -400,20 +426,14 @@ config HAVE_HARDLOCKUP_DETECTOR_PERF
 	  The arch chooses to use the generic perf-NMI-based hardlockup
 	  detector. Must define HAVE_PERF_EVENTS_NMI.
 
-config HAVE_NMI_WATCHDOG
-	depends on HAVE_NMI
-	bool
-	help
-	  The arch provides a low level NMI watchdog. It provides
-	  asm/nmi.h, and defines its own arch_touch_nmi_watchdog().
-
 config HAVE_HARDLOCKUP_DETECTOR_ARCH
 	bool
-	select HAVE_NMI_WATCHDOG
 	help
-	  The arch chooses to provide its own hardlockup detector, which is
-	  a superset of the HAVE_NMI_WATCHDOG. It also conforms to config
-	  interfaces and parameters provided by hardlockup detector subsystem.
+	  The arch provides its own hardlockup detector implementation instead
+	  of the generic ones.
+
+	  It uses the same command line parameters, and sysctl interface,
+	  as the generic hardlockup detectors.
 
 config HAVE_PERF_REGS
 	bool
@@ -1188,13 +1208,6 @@ config COMPAT_32BIT_TIME
 config ARCH_NO_PREEMPT
 	bool
 
-config ARCH_EPHEMERAL_INODES
-	def_bool n
-	help
-	  An arch should select this symbol if it doesn't keep track of inode
-	  instances on its own, but instead relies on something else (e.g. the
-	  host kernel for an UML kernel).
-
 config ARCH_SUPPORTS_RT
 	bool
 
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index a5c2b1aa46b02..d6968d090d49a 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -30,6 +30,7 @@ config ALPHA
 	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_MOD_ARCH_SPECIFIC
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select ODD_RT_SIGACTION
 	select OLD_SIGSUSPEND
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index f2861a43a61ef..cbd9244571af0 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -200,25 +200,6 @@ ATOMIC_OPS(xor, xor)
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
 
-#define arch_atomic64_cmpxchg(v, old, new) \
-	(arch_cmpxchg(&((v)->counter), old, new))
-#define arch_atomic64_xchg(v, new) \
-	(arch_xchg(&((v)->counter), new))
-
-#define arch_atomic_cmpxchg(v, old, new) \
-	(arch_cmpxchg(&((v)->counter), old, new))
-#define arch_atomic_xchg(v, new) \
-	(arch_xchg(&((v)->counter), new))
-
-/**
- * arch_atomic_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
- */
 static __inline__ int arch_atomic_fetch_add_unless(atomic_t *v, int a, int u)
 {
 	int c, new, old;
@@ -242,15 +223,6 @@ static __inline__ int arch_atomic_fetch_add_unless(atomic_t *v, int a, int u)
 }
 #define arch_atomic_fetch_add_unless arch_atomic_fetch_add_unless
 
-/**
- * arch_atomic64_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
- */
 static __inline__ s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 {
 	s64 c, new, old;
@@ -274,13 +246,6 @@ static __inline__ s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u
 }
 #define arch_atomic64_fetch_add_unless arch_atomic64_fetch_add_unless
 
-/*
- * arch_atomic64_dec_if_positive - decrement by 1 if old value positive
- * @v: pointer of type atomic_t
- *
- * The function returns the old value of *v minus 1, even if
- * the atomic variable, v, was not decremented.
- */
 static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 {
 	s64 old, tmp;
diff --git a/arch/alpha/include/asm/bugs.h b/arch/alpha/include/asm/bugs.h
deleted file mode 100644
index 78030d1c7e7e0..0000000000000
--- a/arch/alpha/include/asm/bugs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/asm-alpha/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-/*
- * I don't know of any alpha bugs yet.. Nice chip
- */
-
-static void check_bugs(void)
-{
-}
diff --git a/arch/alpha/include/asm/processor.h b/arch/alpha/include/asm/processor.h
index 714abe494e5fd..55bb1c09fd39d 100644
--- a/arch/alpha/include/asm/processor.h
+++ b/arch/alpha/include/asm/processor.h
@@ -47,12 +47,6 @@ unsigned long __get_wchan(struct task_struct *p);
 
 #define ARCH_HAS_PREFETCH
 #define ARCH_HAS_PREFETCHW
-#define ARCH_HAS_SPINLOCK_PREFETCH
-
-#ifndef CONFIG_SMP
-/* Nothing to prefetch. */
-#define spin_lock_prefetch(lock)  	do { } while (0)
-#endif
 
 extern inline void prefetch(const void *ptr)  
 { 
@@ -64,11 +58,4 @@ extern inline void prefetchw(const void *ptr)
 	__builtin_prefetch(ptr, 1, 3);
 }
 
-#ifdef CONFIG_SMP
-extern inline void spin_lock_prefetch(const void *ptr)  
-{
-	__builtin_prefetch(ptr, 1, 3);
-}
-#endif
-
 #endif /* __ASM_ALPHA_PROCESSOR_H */
diff --git a/arch/alpha/include/uapi/asm/socket.h b/arch/alpha/include/uapi/asm/socket.h
index 739891b941365..e94f621903fee 100644
--- a/arch/alpha/include/uapi/asm/socket.h
+++ b/arch/alpha/include/uapi/asm/socket.h
@@ -137,6 +137,9 @@
 
 #define SO_RCVMARK		75
 
+#define SO_PASSPIDFD		76
+#define SO_PEERPIDFD		77
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 2a9a877a05083..d98701ee36c6a 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -1014,8 +1014,6 @@ SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv,
 	return do_sys_settimeofday64(tv ? &kts : NULL, tz ? &ktz : NULL);
 }
 
-asmlinkage long sys_ni_posix_timers(void);
-
 SYSCALL_DEFINE2(osf_utimes, const char __user *, filename,
 		struct timeval32 __user *, tvs)
 {
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index 33bf3a6270027..3d7473531ab12 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -385,8 +385,7 @@ setup_memory(void *kernel_end)
 #endif /* CONFIG_BLK_DEV_INITRD */
 }
 
-int __init
-page_is_ram(unsigned long pfn)
+int page_is_ram(unsigned long pfn)
 {
 	struct memclust_struct * cluster;
 	struct memdesc_struct * memdesc;
@@ -658,7 +657,7 @@ setup_arch(char **cmdline_p)
 #endif
 
 	/* Default root filesystem to sda2.  */
-	ROOT_DEV = Root_SDA2;
+	ROOT_DEV = MKDEV(SCSI_DISK0_MAJOR, 2);
 
 #ifdef CONFIG_EISA
 	/* FIXME:  only set this when we actually have EISA in this box? */
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index 8ebacf37a8cf4..1f13995d00d7b 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -490,3 +490,4 @@
 558	common	process_mrelease		sys_process_mrelease
 559	common  futex_waitv                     sys_futex_waitv
 560	common	set_mempolicy_home_node		sys_ni_syscall
+561	common	cachestat			sys_cachestat
diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c
index 7b01ae4f3bc6c..8c9850437e674 100644
--- a/arch/alpha/mm/fault.c
+++ b/arch/alpha/mm/fault.c
@@ -119,20 +119,12 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 		flags |= FAULT_FLAG_USER;
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	mmap_read_lock(mm);
-	vma = find_vma(mm, address);
+	vma = lock_mm_and_find_vma(mm, address, regs);
 	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (expand_stack(vma, address))
-		goto bad_area;
+		goto bad_area_nosemaphore;
 
 	/* Ok, we have a good vm_area for this memory access, so
 	   we can handle it.  */
- good_area:
 	si_code = SEGV_ACCERR;
 	if (cause < 0) {
 		if (!(vma->vm_flags & VM_EXEC))
@@ -192,6 +184,7 @@ retry:
  bad_area:
 	mmap_read_unlock(mm);
 
+ bad_area_nosemaphore:
 	if (user_mode(regs))
 		goto do_sigsegv;
 
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index ab6d701365bb0..96cf8720bb939 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -41,6 +41,7 @@ config ARC
 	select HAVE_PERF_EVENTS
 	select HAVE_SYSCALL_TRACEPOINTS
 	select IRQ_DOMAIN
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select OF
 	select OF_EARLY_FLATTREE
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
index 2f336d99a8cf3..07c89281c2e3a 100644
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -13,7 +13,6 @@ CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig
index 899b2fd5c71d1..8c3ed5d6e6c35 100644
--- a/arch/arc/configs/haps_hs_defconfig
+++ b/arch/arc/configs/haps_hs_defconfig
@@ -14,7 +14,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs"
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig
index 0d32aac8069f2..61107e8bac336 100644
--- a/arch/arc/configs/haps_hs_smp_defconfig
+++ b/arch/arc/configs/haps_hs_smp_defconfig
@@ -15,7 +15,6 @@ CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_SMP=y
 CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu"
 CONFIG_KPROBES=y
diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
index d18378d2c2a63..4ee2a1507b57f 100644
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@@ -13,7 +13,6 @@ CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_ARC_SOC_HSDK=y
diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig
index 6f0d2be9d926c..941bbadd6bf2c 100644
--- a/arch/arc/configs/tb10x_defconfig
+++ b/arch/arc/configs/tb10x_defconfig
@@ -19,7 +19,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_ISA_ARCOMPACT=y
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/arc/include/asm/atomic-spinlock.h b/arch/arc/include/asm/atomic-spinlock.h
index 2c830347bfb4e..89d12a60f84c0 100644
--- a/arch/arc/include/asm/atomic-spinlock.h
+++ b/arch/arc/include/asm/atomic-spinlock.h
@@ -81,6 +81,11 @@ static inline int arch_atomic_fetch_##op(int i, atomic_t *v)		\
 ATOMIC_OPS(add, +=, add)
 ATOMIC_OPS(sub, -=, sub)
 
+#define arch_atomic_fetch_add		arch_atomic_fetch_add
+#define arch_atomic_fetch_sub		arch_atomic_fetch_sub
+#define arch_atomic_add_return		arch_atomic_add_return
+#define arch_atomic_sub_return		arch_atomic_sub_return
+
 #undef ATOMIC_OPS
 #define ATOMIC_OPS(op, c_op, asm_op)					\
 	ATOMIC_OP(op, c_op, asm_op)					\
@@ -92,7 +97,11 @@ ATOMIC_OPS(or, |=, or)
 ATOMIC_OPS(xor, ^=, xor)
 
 #define arch_atomic_andnot		arch_atomic_andnot
+
+#define arch_atomic_fetch_and		arch_atomic_fetch_and
 #define arch_atomic_fetch_andnot	arch_atomic_fetch_andnot
+#define arch_atomic_fetch_or		arch_atomic_fetch_or
+#define arch_atomic_fetch_xor		arch_atomic_fetch_xor
 
 #undef ATOMIC_OPS
 #undef ATOMIC_FETCH_OP
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
index 52ee51e1ff7c2..592d7fffc223c 100644
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@@ -22,30 +22,6 @@
 #include <asm/atomic-spinlock.h>
 #endif
 
-#define arch_atomic_cmpxchg(v, o, n)					\
-({									\
-	arch_cmpxchg(&((v)->counter), (o), (n));			\
-})
-
-#ifdef arch_cmpxchg_relaxed
-#define arch_atomic_cmpxchg_relaxed(v, o, n)				\
-({									\
-	arch_cmpxchg_relaxed(&((v)->counter), (o), (n));		\
-})
-#endif
-
-#define arch_atomic_xchg(v, n)						\
-({									\
-	arch_xchg(&((v)->counter), (n));				\
-})
-
-#ifdef arch_xchg_relaxed
-#define arch_atomic_xchg_relaxed(v, n)					\
-({									\
-	arch_xchg_relaxed(&((v)->counter), (n));			\
-})
-#endif
-
 /*
  * 64-bit atomics
  */
diff --git a/arch/arc/include/asm/atomic64-arcv2.h b/arch/arc/include/asm/atomic64-arcv2.h
index c5a8010fdc97d..6b6db981967ae 100644
--- a/arch/arc/include/asm/atomic64-arcv2.h
+++ b/arch/arc/include/asm/atomic64-arcv2.h
@@ -159,6 +159,7 @@ arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
 
 	return prev;
 }
+#define arch_atomic64_cmpxchg arch_atomic64_cmpxchg
 
 static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new)
 {
@@ -179,14 +180,7 @@ static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new)
 
 	return prev;
 }
-
-/**
- * arch_atomic64_dec_if_positive - decrement by 1 if old value positive
- * @v: pointer of type atomic64_t
- *
- * The function returns the old value of *v minus 1, even if
- * the atomic variable, v, was not decremented.
- */
+#define arch_atomic64_xchg arch_atomic64_xchg
 
 static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 {
@@ -212,15 +206,6 @@ static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 }
 #define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
 
-/**
- * arch_atomic64_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, if it was not @u.
- * Returns the old value of @v
- */
 static inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 {
 	s64 old, temp;
diff --git a/arch/arc/include/asm/fb.h b/arch/arc/include/asm/fb.h
index dc2e303cdbbb4..9c2383d29cbb9 100644
--- a/arch/arc/include/asm/fb.h
+++ b/arch/arc/include/asm/fb.h
@@ -1,20 +1,8 @@
 /* SPDX-License-Identifier: GPL-2.0 */
+
 #ifndef _ASM_FB_H_
 #define _ASM_FB_H_
 
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
+#include <asm-generic/fb.h>
 
 #endif /* _ASM_FB_H_ */
diff --git a/arch/arc/include/asm/linkage.h b/arch/arc/include/asm/linkage.h
index c9434ff3aa4ce..8a3fb71e9cfad 100644
--- a/arch/arc/include/asm/linkage.h
+++ b/arch/arc/include/asm/linkage.h
@@ -8,6 +8,10 @@
 
 #include <asm/dwarf.h>
 
+#define ASM_NL		 `	/* use '`' to mark new line in macro */
+#define __ALIGN		.align 4
+#define __ALIGN_STR	__stringify(__ALIGN)
+
 #ifdef __ASSEMBLY__
 
 .macro ST2 e, o, off
@@ -28,10 +32,6 @@
 #endif
 .endm
 
-#define ASM_NL		 `	/* use '`' to mark new line in macro */
-#define __ALIGN		.align 4
-#define __ALIGN_STR	__stringify(__ALIGN)
-
 /* annotation for data we want in DCCM - if enabled in .config */
 .macro ARCFP_DATA nm
 #ifdef CONFIG_ARC_HAS_DCCM
diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c
index 5ca59a482632a..f59e722d147f9 100644
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@@ -113,15 +113,9 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	mmap_read_lock(mm);
-
-	vma = find_vma(mm, address);
+	vma = lock_mm_and_find_vma(mm, address, regs);
 	if (!vma)
-		goto bad_area;
-	if (unlikely(address < vma->vm_start)) {
-		if (!(vma->vm_flags & VM_GROWSDOWN) || expand_stack(vma, address))
-			goto bad_area;
-	}
+		goto bad_area_nosemaphore;
 
 	/*
 	 * vm_area is good, now check permissions for this memory access
@@ -161,6 +155,7 @@ retry:
 bad_area:
 	mmap_read_unlock(mm);
 
+bad_area_nosemaphore:
 	/*
 	 * Major/minor page fault accounting
 	 * (in case of retry we only land here once)
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index 2b89b6c538019..9f64d729c9f87 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -87,7 +87,7 @@ void __init setup_arch_memory(void)
 	setup_initial_init_mm(_text, _etext, _edata, _end);
 
 	/* first page of system - kernel .vector starts here */
-	min_low_pfn = virt_to_pfn(CONFIG_LINUX_RAM_BASE);
+	min_low_pfn = virt_to_pfn((void *)CONFIG_LINUX_RAM_BASE);
 
 	/* Last usable page of low mem */
 	max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0fb4b218f6658..7a27550ff3c1f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -5,6 +5,7 @@ config ARM
 	select ARCH_32BIT_OFF_T
 	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
 	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
@@ -124,7 +125,9 @@ config ARM
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
 	select IRQ_FORCED_THREADING
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_REL
 	select NEED_DMA_MAP_STATE
 	select OF_EARLY_FLATTREE if OF
@@ -1460,6 +1463,9 @@ config USE_OF
 	help
 	  Include support for flattened device tree machine descriptions.
 
+config ARCH_WANT_FLAT_DTB_INSTALL
+	def_bool y
+
 config ATAGS
 	bool "Support for the traditional ATAGS boot data passing"
 	default y
@@ -1780,7 +1786,7 @@ config VFP
 	  Say Y to include VFP support code in the kernel. This is needed
 	  if your hardware includes a VFP unit.
 
-	  Please see <file:Documentation/arm/vfp/release-notes.rst> for
+	  Please see <file:Documentation/arch/arm/vfp/release-notes.rst> for
 	  release notes and additional status information.
 
 	  Say N if your target does not have VFP hardware.
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index 1feb6b0f7a1fd..627752f18661b 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -2,6 +2,7 @@
 #include <linux/libfdt_env.h>
 #include <asm/setup.h>
 #include <libfdt.h>
+#include "misc.h"
 
 #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
 #define do_extend_cmdline 1
diff --git a/arch/arm/boot/compressed/fdt_check_mem_start.c b/arch/arm/boot/compressed/fdt_check_mem_start.c
index 9291a2661bdfe..aa856567fd33f 100644
--- a/arch/arm/boot/compressed/fdt_check_mem_start.c
+++ b/arch/arm/boot/compressed/fdt_check_mem_start.c
@@ -3,6 +3,7 @@
 #include <linux/kernel.h>
 #include <linux/libfdt.h>
 #include <linux/sizes.h>
+#include "misc.h"
 
 static const void *get_prop(const void *fdt, const char *node_path,
 			    const char *property, int minlen)
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index abfed1aa2baa8..6b4baa6a9a50a 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -103,9 +103,6 @@ static void putstr(const char *ptr)
 /*
  * gzip declarations
  */
-extern char input_data[];
-extern char input_data_end[];
-
 unsigned char *output_data;
 
 unsigned long free_mem_ptr;
@@ -131,9 +128,6 @@ asmlinkage void __div0(void)
 	error("Attempting division by 0!");
 }
 
-extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
-
-
 void
 decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 		unsigned long free_mem_ptr_end_p,
diff --git a/arch/arm/boot/compressed/misc.h b/arch/arm/boot/compressed/misc.h
index c958dccd1d97c..6da00a26ac089 100644
--- a/arch/arm/boot/compressed/misc.h
+++ b/arch/arm/boot/compressed/misc.h
@@ -6,5 +6,16 @@
 void error(char *x) __noreturn;
 extern unsigned long free_mem_ptr;
 extern unsigned long free_mem_end_ptr;
+void __div0(void);
+void
+decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
+		  unsigned long free_mem_ptr_end_p, int arch_id);
+void fortify_panic(const char *name);
+int atags_to_fdt(void *atag_list, void *fdt, int total_space);
+uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt);
+int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
+
+extern char input_data[];
+extern char input_data_end[];
 
 #endif
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 59829fc903152..efe38eb253016 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1,1672 +1,41 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_ALPINE) += \
-	alpine-db.dtb
-dtb-$(CONFIG_MACH_ARTPEC6) += \
-	artpec6-devboard.dtb
-dtb-$(CONFIG_MACH_ASM9260) += \
-	alphascale-asm9260-devkit.dtb
-# Keep at91 dtb files sorted alphabetically for each SoC
-dtb-$(CONFIG_SOC_AT91RM9200) += \
-	at91rm9200ek.dtb \
-	mpa1600.dtb
-dtb-$(CONFIG_SOC_AT91SAM9) += \
-	animeo_ip.dtb \
-	at91-qil_a9260.dtb \
-	aks-cdu.dtb \
-	ethernut5.dtb \
-	evk-pro3.dtb \
-	tny_a9260.dtb \
-	usb_a9260.dtb \
-	at91sam9260ek.dtb \
-	at91sam9261ek.dtb \
-	at91sam9263ek.dtb \
-	at91-sam9_l9260.dtb \
-	tny_a9263.dtb \
-	usb_a9263.dtb \
-	at91-foxg20.dtb \
-	at91-kizbox.dtb \
-	at91-lmu5000.dtb \
-	at91sam9g20ek.dtb \
-	at91sam9g20ek_2mmc.dtb \
-	tny_a9g20.dtb \
-	usb_a9g20.dtb \
-	usb_a9g20_lpw.dtb \
-	at91sam9m10g45ek.dtb \
-	pm9g45.dtb \
-	at91sam9n12ek.dtb \
-	at91sam9rlek.dtb \
-	at91-ariag25.dtb \
-	at91-ariettag25.dtb \
-	at91-cosino_mega2560.dtb \
-	at91-kizboxmini-base.dtb \
-	at91-kizboxmini-mb.dtb \
-	at91-kizboxmini-rd.dtb \
-	at91-q5xr5.dtb \
-	at91-smartkiz.dtb \
-	at91-wb45n.dtb \
-	at91sam9g15ek.dtb \
-	at91sam9g25-gardena-smart-gateway.dtb \
-	at91sam9g25ek.dtb \
-	at91sam9g35ek.dtb \
-	at91sam9x25ek.dtb \
-	at91sam9x35ek.dtb
-dtb-$(CONFIG_SOC_SAM9X60) += \
-	at91-sam9x60_curiosity.dtb \
-	at91-sam9x60ek.dtb
-dtb-$(CONFIG_SOC_SAM_V7) += \
-	at91-kizbox2-2.dtb \
-	at91-kizbox3-hs.dtb \
-	at91-nattis-2-natte-2.dtb \
-	at91-sama5d27_som1_ek.dtb \
-	at91-sama5d27_wlsom1_ek.dtb \
-	at91-sama5d2_icp.dtb \
-	at91-sama5d2_ptc_ek.dtb \
-	at91-sama5d2_xplained.dtb \
-	at91-sama5d3_eds.dtb \
-	at91-sama5d3_ksz9477_evb.dtb \
-	at91-sama5d3_xplained.dtb \
-	at91-dvk_som60.dtb \
-	at91-gatwick.dtb \
-	at91-tse850-3.dtb \
-	at91-wb50n.dtb \
-	sama5d31ek.dtb \
-	sama5d33ek.dtb \
-	sama5d34ek.dtb \
-	sama5d35ek.dtb \
-	sama5d36ek.dtb \
-	sama5d36ek_cmp.dtb \
-	at91-sama5d4_ma5d4evk.dtb \
-	at91-sama5d4_xplained.dtb \
-	at91-sama5d4ek.dtb \
-	at91-vinco.dtb
-dtb-$(CONFIG_SOC_SAMA7G5) += \
-	at91-sama7g5ek.dtb
-dtb-$(CONFIG_SOC_SP7021) += \
-	sunplus-sp7021-demo-v3.dtb
-dtb-$(CONFIG_ARCH_AXXIA) += \
-	axm5516-amarillo.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += \
-	bcm2835-rpi-b.dtb \
-	bcm2835-rpi-a.dtb \
-	bcm2835-rpi-b-rev2.dtb \
-	bcm2835-rpi-b-plus.dtb \
-	bcm2835-rpi-a-plus.dtb \
-	bcm2835-rpi-cm1-io1.dtb \
-	bcm2836-rpi-2-b.dtb \
-	bcm2837-rpi-3-a-plus.dtb \
-	bcm2837-rpi-3-b.dtb \
-	bcm2837-rpi-3-b-plus.dtb \
-	bcm2837-rpi-cm3-io3.dtb \
-	bcm2837-rpi-zero-2-w.dtb \
-	bcm2711-rpi-400.dtb \
-	bcm2711-rpi-4-b.dtb \
-	bcm2711-rpi-cm4-io.dtb \
-	bcm2835-rpi-zero.dtb \
-	bcm2835-rpi-zero-w.dtb
-dtb-$(CONFIG_ARCH_BCM_5301X) += \
-	bcm4708-asus-rt-ac56u.dtb \
-	bcm4708-asus-rt-ac68u.dtb \
-	bcm4708-buffalo-wzr-1750dhp.dtb \
-	bcm4708-buffalo-wzr-1166dhp.dtb \
-	bcm4708-buffalo-wzr-1166dhp2.dtb \
-	bcm4708-linksys-ea6300-v1.dtb \
-	bcm4708-linksys-ea6500-v2.dtb \
-	bcm4708-luxul-xap-1510.dtb \
-	bcm4708-luxul-xwc-1000.dtb \
-	bcm4708-netgear-r6250.dtb \
-	bcm4708-netgear-r6300-v2.dtb \
-	bcm4708-smartrg-sr400ac.dtb \
-	bcm47081-asus-rt-n18u.dtb \
-	bcm47081-buffalo-wzr-600dhp2.dtb \
-	bcm47081-buffalo-wzr-900dhp.dtb \
-	bcm47081-luxul-xap-1410.dtb \
-	bcm47081-luxul-xwr-1200.dtb \
-	bcm47081-tplink-archer-c5-v2.dtb \
-	bcm4709-asus-rt-ac87u.dtb \
-	bcm4709-buffalo-wxr-1900dhp.dtb \
-	bcm4709-linksys-ea9200.dtb \
-	bcm4709-netgear-r7000.dtb \
-	bcm4709-netgear-r8000.dtb \
-	bcm4709-tplink-archer-c9-v1.dtb \
-	bcm47094-asus-rt-ac88u.dtb \
-	bcm47094-dlink-dir-885l.dtb \
-	bcm47094-dlink-dir-890l.dtb \
-	bcm47094-linksys-panamera.dtb \
-	bcm47094-luxul-abr-4500.dtb \
-	bcm47094-luxul-xap-1610.dtb \
-	bcm47094-luxul-xbr-4500.dtb \
-	bcm47094-luxul-xwc-2000.dtb \
-	bcm47094-luxul-xwr-3100.dtb \
-	bcm47094-luxul-xwr-3150-v1.dtb \
-	bcm47094-netgear-r8500.dtb \
-	bcm47094-phicomm-k3.dtb \
-	bcm53015-meraki-mr26.dtb \
-	bcm53016-dlink-dwl-8610ap.dtb \
-	bcm53016-meraki-mr32.dtb \
-	bcm94708.dtb \
-	bcm94709.dtb \
-	bcm953012er.dtb \
-	bcm953012hr.dtb \
-	bcm953012k.dtb
-dtb-$(CONFIG_ARCH_BCM_53573) += \
-	bcm47189-luxul-xap-1440.dtb \
-	bcm47189-luxul-xap-810.dtb \
-	bcm47189-tenda-ac9.dtb \
-	bcm947189acdbmr.dtb
-dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
-	bcm911360_entphn.dtb \
-	bcm911360k.dtb \
-	bcm958300k.dtb \
-	bcm958305k.dtb
-dtb-$(CONFIG_ARCH_BCM_HR2) += \
-	bcm53340-ubnt-unifi-switch8.dtb
-dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
-	bcm28155-ap.dtb \
-	bcm21664-garnet.dtb \
-	bcm23550-sparrow.dtb
-dtb-$(CONFIG_ARCH_BCM_NSP) += \
-	bcm958522er.dtb \
-	bcm958525er.dtb \
-	bcm958525xmc.dtb \
-	bcm958622hr.dtb \
-	bcm958623hr.dtb \
-	bcm958625-meraki-mx64.dtb \
-	bcm958625-meraki-mx64-a0.dtb \
-	bcm958625-meraki-mx64w.dtb \
-	bcm958625-meraki-mx64w-a0.dtb \
-	bcm958625-meraki-mx65.dtb \
-	bcm958625-meraki-mx65w.dtb \
-	bcm958625hr.dtb \
-	bcm988312hr.dtb \
-	bcm958625k.dtb
-dtb-$(CONFIG_ARCH_BERLIN) += \
-	berlin2-sony-nsz-gs7.dtb \
-	berlin2cd-google-chromecast.dtb \
-	berlin2cd-valve-steamlink.dtb \
-	berlin2q-marvell-dmp.dtb
-dtb-$(CONFIG_ARCH_BRCMSTB) += \
-	bcm7445-bcm97445svmb.dtb
-dtb-$(CONFIG_ARCH_BCMBCA) += \
-	bcm947622.dtb \
-	bcm963138.dtb \
-	bcm963138dvt.dtb \
-	bcm963148.dtb \
-	bcm963178.dtb \
-	bcm96756.dtb \
-	bcm96846.dtb \
-	bcm96855.dtb \
-	bcm96878.dtb
-dtb-$(CONFIG_ARCH_CLPS711X) += \
-	ep7211-edb7211.dtb
-dtb-$(CONFIG_ARCH_DAVINCI) += \
-	da850-lcdk.dtb \
-	da850-enbw-cmc.dtb \
-	da850-evm.dtb \
-	da850-lego-ev3.dtb
-dtb-$(CONFIG_ARCH_DIGICOLOR) += \
-	cx92755_equinox.dtb
-dtb-$(CONFIG_ARCH_AIROHA) += \
-	en7523-evb.dtb
-dtb-$(CONFIG_ARCH_EXYNOS3) += \
-	exynos3250-artik5-eval.dtb \
-	exynos3250-monk.dtb \
-	exynos3250-rinato.dtb
-dtb-$(CONFIG_ARCH_EXYNOS4) += \
-	exynos4210-i9100.dtb \
-	exynos4210-origen.dtb \
-	exynos4210-smdkv310.dtb \
-	exynos4210-trats.dtb \
-	exynos4210-universal_c210.dtb \
-	exynos4412-i9300.dtb \
-	exynos4412-i9305.dtb \
-	exynos4412-itop-elite.dtb \
-	exynos4412-n710x.dtb \
-	exynos4412-odroidu3.dtb \
-	exynos4412-odroidx.dtb \
-	exynos4412-odroidx2.dtb \
-	exynos4412-origen.dtb \
-	exynos4412-p4note-n8010.dtb \
-	exynos4412-smdk4412.dtb \
-	exynos4412-tiny4412.dtb \
-	exynos4412-trats2.dtb
-dtb-$(CONFIG_ARCH_EXYNOS5) += \
-	exynos5250-arndale.dtb \
-	exynos5250-smdk5250.dtb \
-	exynos5250-snow.dtb \
-	exynos5250-snow-rev5.dtb \
-	exynos5250-spring.dtb \
-	exynos5260-xyref5260.dtb \
-	exynos5410-odroidxu.dtb \
-	exynos5410-smdk5410.dtb \
-	exynos5420-arndale-octa.dtb \
-	exynos5420-peach-pit.dtb \
-	exynos5420-smdk5420.dtb \
-	exynos5420-chagall-wifi.dtb \
-	exynos5420-klimt-wifi.dtb \
-	exynos5422-odroidhc1.dtb \
-	exynos5422-odroidxu3.dtb \
-	exynos5422-odroidxu3-lite.dtb \
-	exynos5422-odroidxu4.dtb \
-	exynos5422-samsung-k3g.dtb \
-	exynos5800-peach-pi.dtb
-dtb-$(CONFIG_ARCH_GEMINI) += \
-	gemini-dlink-dir-685.dtb \
-	gemini-dlink-dns-313.dtb \
-	gemini-nas4220b.dtb \
-	gemini-ns2502.dtb \
-	gemini-rut1xx.dtb \
-	gemini-sl93512r.dtb \
-	gemini-sq201.dtb \
-	gemini-ssi1328.dtb \
-	gemini-wbd111.dtb \
-	gemini-wbd222.dtb
-dtb-$(CONFIG_ARCH_HI3xxx) += \
-	hi3620-hi4511.dtb
-dtb-$(CONFIG_ARCH_HIGHBANK) += \
-	highbank.dtb \
-	ecx-2000.dtb
-dtb-$(CONFIG_ARCH_HIP01) += \
-	hip01-ca9x2.dtb
-dtb-$(CONFIG_ARCH_HIP04) += \
-	hip04-d01.dtb
-dtb-$(CONFIG_ARCH_HISI) += \
-	hi3519-demb.dtb
-dtb-$(CONFIG_ARCH_HIX5HD2) += \
-	hisi-x5hd2-dkb.dtb
-dtb-$(CONFIG_ARCH_HPE_GXP) += \
-	hpe-bmc-dl360gen10.dtb
-dtb-$(CONFIG_ARCH_INTEGRATOR) += \
-	integratorap.dtb \
-	integratorap-im-pd1.dtb \
-	integratorcp.dtb
-dtb-$(CONFIG_ARCH_IXP4XX) += \
-	intel-ixp42x-linksys-nslu2.dtb \
-	intel-ixp42x-linksys-wrv54g.dtb \
-	intel-ixp42x-freecom-fsg-3.dtb \
-	intel-ixp42x-welltech-epbx100.dtb \
-	intel-ixp42x-ixdp425.dtb \
-	intel-ixp43x-kixrp435.dtb \
-	intel-ixp46x-ixdp465.dtb \
-	intel-ixp42x-adi-coyote.dtb \
-	intel-ixp42x-ixdpg425.dtb \
-	intel-ixp42x-goramo-multilink.dtb \
-	intel-ixp42x-iomega-nas100d.dtb \
-	intel-ixp42x-dlink-dsm-g600.dtb \
-	intel-ixp42x-gateworks-gw2348.dtb \
-	intel-ixp43x-gateworks-gw2358.dtb \
-	intel-ixp42x-netgear-wg302v1.dtb \
-	intel-ixp42x-arcom-vulcan.dtb \
-	intel-ixp42x-gateway-7001.dtb
-dtb-$(CONFIG_ARCH_KEYSTONE) += \
-	keystone-k2hk-evm.dtb \
-	keystone-k2l-evm.dtb \
-	keystone-k2e-evm.dtb \
-	keystone-k2g-evm.dtb \
-	keystone-k2g-ice.dtb
-dtb-$(CONFIG_MACH_KIRKWOOD) += \
-	kirkwood-b3.dtb \
-	kirkwood-blackarmor-nas220.dtb \
-	kirkwood-c200-v1.dtb \
-	kirkwood-cloudbox.dtb \
-	kirkwood-d2net.dtb \
-	kirkwood-db-88f6281.dtb \
-	kirkwood-db-88f6282.dtb \
-	kirkwood-dir665.dtb \
-	kirkwood-dns320.dtb \
-	kirkwood-dns325.dtb \
-	kirkwood-dockstar.dtb \
-	kirkwood-dreamplug.dtb \
-	kirkwood-ds109.dtb \
-	kirkwood-ds110jv10.dtb \
-	kirkwood-ds111.dtb \
-	kirkwood-ds112.dtb \
-	kirkwood-ds209.dtb \
-	kirkwood-ds210.dtb \
-	kirkwood-ds212.dtb \
-	kirkwood-ds212j.dtb \
-	kirkwood-ds409.dtb \
-	kirkwood-ds409slim.dtb \
-	kirkwood-ds411.dtb \
-	kirkwood-ds411j.dtb \
-	kirkwood-ds411slim.dtb \
-	kirkwood-goflexnet.dtb \
-	kirkwood-guruplug-server-plus.dtb \
-	kirkwood-ib62x0.dtb \
-	kirkwood-iconnect.dtb \
-	kirkwood-iomega_ix2_200.dtb \
-	kirkwood-is2.dtb \
-	kirkwood-km_kirkwood.dtb \
-	kirkwood-l-50.dtb \
-	kirkwood-laplug.dtb \
-	kirkwood-linkstation-lsqvl.dtb \
-	kirkwood-linkstation-lsvl.dtb \
-	kirkwood-linkstation-lswsxl.dtb \
-	kirkwood-linkstation-lswvl.dtb \
-	kirkwood-linkstation-lswxl.dtb \
-	kirkwood-linksys-viper.dtb \
-	kirkwood-lschlv2.dtb \
-	kirkwood-lsxhl.dtb \
-	kirkwood-mplcec4.dtb \
-	kirkwood-mv88f6281gtw-ge.dtb \
-	kirkwood-nas2big.dtb \
-	kirkwood-net2big.dtb \
-	kirkwood-net5big.dtb \
-	kirkwood-netgear_readynas_duo_v2.dtb \
-	kirkwood-netgear_readynas_nv+_v2.dtb \
-	kirkwood-ns2.dtb \
-	kirkwood-ns2lite.dtb \
-	kirkwood-ns2max.dtb \
-	kirkwood-ns2mini.dtb \
-	kirkwood-nsa310.dtb \
-	kirkwood-nsa310a.dtb \
-	kirkwood-nsa310s.dtb \
-	kirkwood-nsa320.dtb \
-	kirkwood-nsa325.dtb \
-	kirkwood-openblocks_a6.dtb \
-	kirkwood-openblocks_a7.dtb \
-	kirkwood-openrd-base.dtb \
-	kirkwood-openrd-client.dtb \
-	kirkwood-openrd-ultimate.dtb \
-	kirkwood-pogo_e02.dtb \
-	kirkwood-pogoplug-series-4.dtb \
-	kirkwood-rd88f6192.dtb \
-	kirkwood-rd88f6281-z0.dtb \
-	kirkwood-rd88f6281-a.dtb \
-	kirkwood-rs212.dtb \
-	kirkwood-rs409.dtb \
-	kirkwood-rs411.dtb \
-	kirkwood-sheevaplug.dtb \
-	kirkwood-sheevaplug-esata.dtb \
-	kirkwood-t5325.dtb \
-	kirkwood-topkick.dtb \
-	kirkwood-ts219-6281.dtb \
-	kirkwood-ts219-6282.dtb \
-	kirkwood-ts419-6281.dtb \
-	kirkwood-ts419-6282.dtb
-dtb-$(CONFIG_ARCH_LPC18XX) += \
-	lpc4337-ciaa.dtb \
-	lpc4350-hitex-eval.dtb \
-	lpc4357-ea4357-devkit.dtb \
-	lpc4357-myd-lpc4357.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += \
-	lpc3250-ea3250.dtb \
-	lpc3250-phy3250.dtb
-dtb-$(CONFIG_ARCH_WPCM450) += \
-	nuvoton-wpcm450-supermicro-x9sci-ln4f.dtb
-dtb-$(CONFIG_ARCH_NPCM7XX) += \
-	nuvoton-npcm730-gsj.dtb \
-	nuvoton-npcm730-gbs.dtb \
-	nuvoton-npcm730-kudo.dtb \
-	nuvoton-npcm750-evb.dtb \
-	nuvoton-npcm750-runbmc-olympus.dtb
-dtb-$(CONFIG_MACH_MESON6) += \
-	meson6-atv1200.dtb
-dtb-$(CONFIG_MACH_MESON8) += \
-	meson8-minix-neo-x8.dtb \
-	meson8b-ec100.dtb \
-	meson8b-mxq.dtb \
-	meson8b-odroidc1.dtb \
-	meson8m2-mxiii-plus.dtb
-dtb-$(CONFIG_ARCH_MMP) += \
-	pxa168-aspenite.dtb \
-	pxa910-dkb.dtb \
-	mmp2-brownstone.dtb \
-	mmp2-olpc-xo-1-75.dtb \
-	mmp3-dell-ariel.dtb
-dtb-$(CONFIG_ARCH_MPS2) += \
-	mps2-an385.dtb \
-	mps2-an399.dtb
-dtb-$(CONFIG_ARCH_MOXART) += \
-	moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_SD5203) += \
-	sd5203.dtb
-dtb-$(CONFIG_SOC_IMX1) += \
-	imx1-ads.dtb \
-	imx1-apf9328.dtb
-dtb-$(CONFIG_SOC_IMX25) += \
-	imx25-eukrea-mbimxsd25-baseboard.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
-	imx25-karo-tx25.dtb \
-	imx25-pdk.dtb
-dtb-$(CONFIG_SOC_IMX27) += \
-	imx27-apf27.dtb \
-	imx27-apf27dev.dtb \
-	imx27-eukrea-mbimxsd27-baseboard.dtb \
-	imx27-pdk.dtb \
-	imx27-phytec-phycore-rdk.dtb \
-	imx27-phytec-phycard-s-rdk.dtb
-dtb-$(CONFIG_SOC_IMX31) += \
-	imx31-bug.dtb \
-	imx31-lite.dtb
-dtb-$(CONFIG_SOC_IMX35) += \
-	imx35-eukrea-mbimxsd35-baseboard.dtb \
-	imx35-pdk.dtb
-dtb-$(CONFIG_SOC_IMX50) += \
-	imx50-evk.dtb \
-	imx50-kobo-aura.dtb
-dtb-$(CONFIG_SOC_IMX51) += \
-	imx51-apf51.dtb \
-	imx51-apf51dev.dtb \
-	imx51-babbage.dtb \
-	imx51-digi-connectcore-jsk.dtb \
-	imx51-eukrea-mbimxsd51-baseboard.dtb \
-	imx51-ts4800.dtb \
-	imx51-zii-rdu1.dtb \
-	imx51-zii-scu2-mezz.dtb \
-	imx51-zii-scu3-esb.dtb
-dtb-$(CONFIG_SOC_IMX53) += \
-	imx53-ard.dtb \
-	imx53-cx9020.dtb \
-	imx53-kp-ddc.dtb \
-	imx53-kp-hsc.dtb \
-	imx53-m53evk.dtb \
-	imx53-m53menlo.dtb \
-	imx53-mba53.dtb \
-	imx53-ppd.dtb \
-	imx53-qsb.dtb \
-	imx53-qsrb.dtb \
-	imx53-sk-imx53.dtb \
-	imx53-smd.dtb \
-	imx53-tx53-x03x.dtb \
-	imx53-tx53-x13x.dtb \
-	imx53-usbarmory.dtb \
-	imx53-voipac-bsb.dtb
-dtb-$(CONFIG_SOC_IMX6Q) += \
-	imx6dl-alti6p.dtb \
-	imx6dl-apf6dev.dtb \
-	imx6dl-aristainetos_4.dtb \
-	imx6dl-aristainetos_7.dtb \
-	imx6dl-aristainetos2_4.dtb \
-	imx6dl-aristainetos2_7.dtb \
-	imx6dl-colibri-aster.dtb \
-	imx6dl-colibri-eval-v3.dtb \
-	imx6dl-colibri-iris.dtb \
-	imx6dl-colibri-iris-v2.dtb \
-	imx6dl-cubox-i.dtb \
-	imx6dl-cubox-i-emmc-som-v15.dtb \
-	imx6dl-cubox-i-som-v15.dtb \
-	imx6dl-dfi-fs700-m60.dtb \
-	imx6dl-dhcom-picoitx.dtb \
-	imx6dl-eckelmann-ci4x10.dtb \
-	imx6dl-emcon-avari.dtb \
-	imx6dl-gw51xx.dtb \
-	imx6dl-gw52xx.dtb \
-	imx6dl-gw53xx.dtb \
-	imx6dl-gw54xx.dtb \
-	imx6dl-gw551x.dtb \
-	imx6dl-gw552x.dtb \
-	imx6dl-gw553x.dtb \
-	imx6dl-gw560x.dtb \
-	imx6dl-gw5903.dtb \
-	imx6dl-gw5904.dtb \
-	imx6dl-gw5907.dtb \
-	imx6dl-gw5910.dtb \
-	imx6dl-gw5912.dtb \
-	imx6dl-gw5913.dtb \
-	imx6dl-hummingboard.dtb \
-	imx6dl-hummingboard-emmc-som-v15.dtb \
-	imx6dl-hummingboard-som-v15.dtb \
-	imx6dl-hummingboard2.dtb \
-	imx6dl-hummingboard2-emmc-som-v15.dtb \
-	imx6dl-hummingboard2-som-v15.dtb \
-	imx6dl-icore.dtb \
-	imx6dl-icore-mipi.dtb \
-	imx6dl-icore-rqs.dtb \
-	imx6dl-lanmcu.dtb \
-	imx6dl-mamoj.dtb \
-	imx6dl-mba6a.dtb \
-	imx6dl-mba6b.dtb \
-	imx6dl-nit6xlite.dtb \
-	imx6dl-nitrogen6x.dtb \
-	imx6dl-phytec-mira-rdk-nand.dtb \
-	imx6dl-phytec-pbab01.dtb \
-	imx6dl-pico-dwarf.dtb \
-	imx6dl-pico-hobbit.dtb \
-	imx6dl-pico-nymph.dtb \
-	imx6dl-pico-pi.dtb \
-	imx6dl-plybas.dtb \
-	imx6dl-plym2m.dtb \
-	imx6dl-prtmvt.dtb \
-	imx6dl-prtrvt.dtb \
-	imx6dl-prtvt7.dtb \
-	imx6dl-rex-basic.dtb \
-	imx6dl-riotboard.dtb \
-	imx6dl-sabreauto.dtb \
-	imx6dl-sabrelite.dtb \
-	imx6dl-sabresd.dtb \
-	imx6dl-savageboard.dtb \
-	imx6dl-skov-revc-lt2.dtb \
-	imx6dl-skov-revc-lt6.dtb \
-	imx6dl-solidsense.dtb \
-	imx6dl-ts4900.dtb \
-	imx6dl-ts7970.dtb \
-	imx6dl-tx6dl-comtft.dtb \
-	imx6dl-tx6s-8034.dtb \
-	imx6dl-tx6s-8034-mb7.dtb \
-	imx6dl-tx6s-8035.dtb \
-	imx6dl-tx6s-8035-mb7.dtb \
-	imx6dl-tx6u-801x.dtb \
-	imx6dl-tx6u-80xx-mb7.dtb \
-	imx6dl-tx6u-8033.dtb \
-	imx6dl-tx6u-8033-mb7.dtb \
-	imx6dl-tx6u-811x.dtb \
-	imx6dl-tx6u-81xx-mb7.dtb \
-	imx6dl-udoo.dtb \
-	imx6dl-victgo.dtb \
-	imx6dl-vicut1.dtb \
-	imx6dl-wandboard.dtb \
-	imx6dl-wandboard-revb1.dtb \
-	imx6dl-wandboard-revd1.dtb \
-	imx6dl-yapp4-draco.dtb \
-	imx6dl-yapp4-hydra.dtb \
-	imx6dl-yapp4-lynx.dtb \
-	imx6dl-yapp4-orion.dtb \
-	imx6dl-yapp4-phoenix.dtb \
-	imx6dl-yapp4-ursa.dtb \
-	imx6q-apalis-eval.dtb \
-	imx6q-apalis-ixora.dtb \
-	imx6q-apalis-ixora-v1.1.dtb \
-	imx6q-apalis-ixora-v1.2.dtb \
-	imx6q-apf6dev.dtb \
-	imx6q-arm2.dtb \
-	imx6q-b450v3.dtb \
-	imx6q-b650v3.dtb \
-	imx6q-b850v3.dtb \
-	imx6q-bosch-acc.dtb \
-	imx6q-cm-fx6.dtb \
-	imx6q-cubox-i.dtb \
-	imx6q-cubox-i-emmc-som-v15.dtb \
-	imx6q-cubox-i-som-v15.dtb \
-	imx6q-dfi-fs700-m60.dtb \
-	imx6q-dhcom-pdk2.dtb \
-	imx6q-display5-tianma-tm070-1280x768.dtb \
-	imx6q-dmo-edmqmx6.dtb \
-	imx6q-dms-ba16.dtb \
-	imx6q-ds.dtb \
-	imx6q-emcon-avari.dtb \
-	imx6q-evi.dtb \
-	imx6dl-b105pv2.dtb \
-	imx6dl-b105v2.dtb \
-	imx6dl-b125v2.dtb \
-	imx6dl-b125pv2.dtb \
-	imx6dl-b155v2.dtb \
-	imx6q-gk802.dtb \
-	imx6q-gw51xx.dtb \
-	imx6q-gw52xx.dtb \
-	imx6q-gw53xx.dtb \
-	imx6q-gw5400-a.dtb \
-	imx6q-gw54xx.dtb \
-	imx6q-gw551x.dtb \
-	imx6q-gw552x.dtb \
-	imx6q-gw553x.dtb \
-	imx6q-gw560x.dtb \
-	imx6q-gw5903.dtb \
-	imx6q-gw5904.dtb \
-	imx6q-gw5907.dtb \
-	imx6q-gw5910.dtb \
-	imx6q-gw5912.dtb \
-	imx6q-gw5913.dtb \
-	imx6q-h100.dtb \
-	imx6q-hummingboard.dtb \
-	imx6q-hummingboard-emmc-som-v15.dtb \
-	imx6q-hummingboard-som-v15.dtb \
-	imx6q-hummingboard2.dtb \
-	imx6q-hummingboard2-emmc-som-v15.dtb \
-	imx6q-hummingboard2-som-v15.dtb \
-	imx6q-icore.dtb \
-	imx6q-icore-mipi.dtb \
-	imx6q-icore-ofcap10.dtb \
-	imx6q-icore-ofcap12.dtb \
-	imx6q-icore-rqs.dtb \
-	imx6q-kp-tpc.dtb \
-	imx6q-logicpd.dtb \
-	imx6q-marsboard.dtb \
-	imx6q-mba6a.dtb \
-	imx6q-mba6b.dtb \
-	imx6q-mccmon6.dtb \
-	imx6q-nitrogen6x.dtb \
-	imx6q-nitrogen6_max.dtb \
-	imx6q-nitrogen6_som2.dtb \
-	imx6q-novena.dtb \
-	imx6q-phytec-mira-rdk-emmc.dtb \
-	imx6q-phytec-mira-rdk-nand.dtb \
-	imx6q-phytec-pbab01.dtb \
-	imx6q-pico-dwarf.dtb \
-	imx6q-pico-hobbit.dtb \
-	imx6q-pico-nymph.dtb \
-	imx6q-pico-pi.dtb \
-	imx6q-pistachio.dtb \
-	imx6q-prti6q.dtb \
-	imx6q-prtwd2.dtb \
-	imx6q-rex-pro.dtb \
-	imx6q-sabreauto.dtb \
-	imx6q-sabrelite.dtb \
-	imx6q-sabresd.dtb \
-	imx6q-savageboard.dtb \
-	imx6q-sbc6x.dtb \
-	imx6q-skov-revc-lt2.dtb \
-	imx6q-skov-revc-lt6.dtb \
-	imx6q-skov-reve-mi1010ait-1cp1.dtb \
-	imx6q-solidsense.dtb \
-	imx6q-tbs2910.dtb \
-	imx6q-ts4900.dtb \
-	imx6q-ts7970.dtb \
-	imx6q-tx6q-1010.dtb \
-	imx6q-tx6q-1010-comtft.dtb \
-	imx6q-tx6q-1020.dtb \
-	imx6q-tx6q-1020-comtft.dtb \
-	imx6q-tx6q-1036.dtb \
-	imx6q-tx6q-1036-mb7.dtb \
-	imx6q-tx6q-10x0-mb7.dtb \
-	imx6q-tx6q-1110.dtb \
-	imx6q-tx6q-11x0-mb7.dtb \
-	imx6q-udoo.dtb \
-	imx6q-utilite-pro.dtb \
-	imx6q-var-dt6customboard.dtb \
-	imx6q-vicut1.dtb \
-	imx6q-wandboard.dtb \
-	imx6q-wandboard-revb1.dtb \
-	imx6q-wandboard-revd1.dtb \
-	imx6q-yapp4-crux.dtb \
-	imx6q-yapp4-pegasus.dtb \
-	imx6q-zii-rdu2.dtb \
-	imx6qp-mba6b.dtb \
-	imx6qp-nitrogen6_max.dtb \
-	imx6qp-nitrogen6_som2.dtb \
-	imx6qp-phytec-mira-rdk-nand.dtb \
-	imx6qp-prtwd3.dtb \
-	imx6qp-sabreauto.dtb \
-	imx6qp-sabresd.dtb \
-	imx6qp-tx6qp-8037.dtb \
-	imx6qp-tx6qp-8037-mb7.dtb \
-	imx6qp-tx6qp-8137.dtb \
-	imx6qp-tx6qp-8137-mb7.dtb \
-	imx6qp-vicutp.dtb \
-	imx6qp-wandboard-revd1.dtb \
-	imx6qp-yapp4-crux-plus.dtb \
-	imx6qp-yapp4-pegasus-plus.dtb \
-	imx6qp-zii-rdu2.dtb \
-	imx6s-dhcom-drc02.dtb
-dtb-$(CONFIG_SOC_IMX6SL) += \
-	imx6sl-evk.dtb \
-	imx6sl-kobo-aura2.dtb \
-	imx6sl-tolino-shine2hd.dtb \
-	imx6sl-tolino-shine3.dtb \
-	imx6sl-tolino-vision.dtb \
-	imx6sl-tolino-vision5.dtb \
-	imx6sl-warp.dtb
-dtb-$(CONFIG_SOC_IMX6SLL) += \
-	imx6sll-evk.dtb \
-	imx6sll-kobo-clarahd.dtb \
-	imx6sll-kobo-librah2o.dtb
-dtb-$(CONFIG_SOC_IMX6SX) += \
-	imx6sx-nitrogen6sx.dtb \
-	imx6sx-sabreauto.dtb \
-	imx6sx-sdb-reva.dtb \
-	imx6sx-sdb-sai.dtb \
-	imx6sx-sdb.dtb \
-	imx6sx-sdb-mqs.dtb \
-	imx6sx-softing-vining-2000.dtb \
-	imx6sx-udoo-neo-basic.dtb \
-	imx6sx-udoo-neo-extended.dtb \
-	imx6sx-udoo-neo-full.dtb
-dtb-$(CONFIG_SOC_IMX6UL) += \
-	imx6ul-14x14-evk.dtb \
-	imx6ul-ccimx6ulsbcexpress.dtb \
-	imx6ul-ccimx6ulsbcpro.dtb \
-	imx6ul-geam.dtb \
-	imx6ul-isiot-emmc.dtb \
-	imx6ul-isiot-nand.dtb \
-	imx6ul-kontron-bl.dtb \
-	imx6ul-kontron-bl-43.dtb \
-	imx6ul-liteboard.dtb \
-	imx6ul-tqma6ul1-mba6ulx.dtb \
-	imx6ul-tqma6ul2-mba6ulx.dtb \
-	imx6ul-tqma6ul2l-mba6ulx.dtb \
-	imx6ul-opos6uldev.dtb \
-	imx6ul-pico-dwarf.dtb \
-	imx6ul-pico-hobbit.dtb \
-	imx6ul-pico-pi.dtb \
-	imx6ul-phytec-segin-ff-rdk-emmc.dtb \
-	imx6ul-phytec-segin-ff-rdk-nand.dtb \
-	imx6ul-prti6g.dtb \
-	imx6ul-tx6ul-0010.dtb \
-	imx6ul-tx6ul-0011.dtb \
-	imx6ul-tx6ul-mainboard.dtb \
-	imx6ull-14x14-evk.dtb \
-	imx6ull-colibri-aster.dtb \
-	imx6ull-colibri-emmc-aster.dtb \
-	imx6ull-colibri-emmc-eval-v3.dtb \
-	imx6ull-colibri-emmc-iris.dtb \
-	imx6ull-colibri-emmc-iris-v2.dtb \
-	imx6ull-colibri-eval-v3.dtb \
-	imx6ull-colibri-iris.dtb \
-	imx6ull-colibri-iris-v2.dtb \
-	imx6ull-colibri-wifi-aster.dtb \
-	imx6ull-colibri-wifi-eval-v3.dtb \
-	imx6ull-colibri-wifi-iris.dtb \
-	imx6ull-colibri-wifi-iris-v2.dtb \
-	imx6ull-dhcom-drc02.dtb \
-	imx6ull-dhcom-pdk2.dtb \
-	imx6ull-dhcom-picoitx.dtb \
-	imx6ull-jozacp.dtb \
-	imx6ull-kontron-bl.dtb \
-	imx6ull-myir-mys-6ulx-eval.dtb \
-	imx6ull-opos6uldev.dtb \
-	imx6ull-phytec-segin-ff-rdk-nand.dtb \
-	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
-	imx6ull-phytec-segin-lc-rdk-nand.dtb \
-	imx6ull-phytec-tauri-emmc.dtb \
-	imx6ull-phytec-tauri-nand.dtb \
-	imx6ull-tarragon-master.dtb \
-	imx6ull-tarragon-micro.dtb \
-	imx6ull-tarragon-slave.dtb \
-	imx6ull-tarragon-slavext.dtb \
-	imx6ull-tqma6ull2-mba6ulx.dtb \
-	imx6ull-tqma6ull2l-mba6ulx.dtb \
-	imx6ulz-14x14-evk.dtb \
-	imx6ulz-bsh-smm-m2.dtb
-dtb-$(CONFIG_SOC_IMX7D) += \
-	imx7d-cl-som-imx7.dtb \
-	imx7d-colibri-aster.dtb \
-	imx7d-colibri-emmc-aster.dtb \
-	imx7d-colibri-emmc-iris.dtb \
-	imx7d-colibri-emmc-iris-v2.dtb \
-	imx7d-colibri-emmc-eval-v3.dtb \
-	imx7d-colibri-eval-v3.dtb \
-	imx7d-colibri-iris.dtb \
-	imx7d-colibri-iris-v2.dtb \
-	imx7d-flex-concentrator.dtb \
-	imx7d-flex-concentrator-mfg.dtb \
-	imx7d-mba7.dtb \
-	imx7d-meerkat96.dtb \
-	imx7d-nitrogen7.dtb \
-	imx7d-pico-dwarf.dtb \
-	imx7d-pico-hobbit.dtb \
-	imx7d-pico-nymph.dtb \
-	imx7d-pico-pi.dtb \
-	imx7d-remarkable2.dtb \
-	imx7d-sbc-imx7.dtb \
-	imx7d-sdb.dtb \
-	imx7d-sdb-reva.dtb \
-	imx7d-sdb-sht11.dtb \
-	imx7d-smegw01.dtb \
-	imx7d-zii-rmu2.dtb \
-	imx7d-zii-rpu2.dtb \
-	imx7s-colibri-aster.dtb \
-	imx7s-colibri-eval-v3.dtb \
-	imx7s-colibri-iris.dtb \
-	imx7s-colibri-iris-v2.dtb \
-	imx7s-mba7.dtb \
-	imx7s-warp.dtb
-dtb-$(CONFIG_SOC_IMX7ULP) += \
-	imx7ulp-com.dtb \
-	imx7ulp-evk.dtb
-dtb-$(CONFIG_SOC_IMXRT) += \
-	imxrt1050-evk.dtb
-dtb-$(CONFIG_SOC_LAN966) += \
-	lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
-	lan966x-kontron-kswitch-d10-mmt-8g.dtb \
-	lan966x-pcb8290.dtb \
-	lan966x-pcb8291.dtb \
-	lan966x-pcb8309.dtb
-dtb-$(CONFIG_SOC_LS1021A) += \
-	ls1021a-iot.dtb \
-	ls1021a-moxa-uc-8410a.dtb \
-	ls1021a-qds.dtb \
-	ls1021a-tsn.dtb \
-	ls1021a-twr.dtb
-dtb-$(CONFIG_SOC_VF610) += \
-	vf500-colibri-eval-v3.dtb \
-	vf610-bk4.dtb \
-	vf610-colibri-eval-v3.dtb \
-	vf610m4-colibri.dtb \
-	vf610-cosmic.dtb \
-	vf610m4-cosmic.dtb \
-	vf610-twr.dtb \
-	vf610-zii-cfu1.dtb \
-	vf610-zii-dev-rev-b.dtb \
-	vf610-zii-dev-rev-c.dtb \
-	vf610-zii-scu4-aib.dtb \
-	vf610-zii-spb4.dtb \
-	vf610-zii-ssmb-dtu.dtb \
-	vf610-zii-ssmb-spu3.dtb
-dtb-$(CONFIG_ARCH_MXS) += \
-	imx23-evk.dtb \
-	imx23-olinuxino.dtb \
-	imx23-sansa.dtb \
-	imx23-stmp378x_devb.dtb \
-	imx23-xfi3.dtb \
-	imx28-apf28.dtb \
-	imx28-apf28dev.dtb \
-	imx28-apx4devkit.dtb \
-	imx28-cfa10036.dtb \
-	imx28-cfa10037.dtb \
-	imx28-cfa10049.dtb \
-	imx28-cfa10055.dtb \
-	imx28-cfa10056.dtb \
-	imx28-cfa10057.dtb \
-	imx28-cfa10058.dtb \
-	imx28-duckbill-2-485.dtb \
-	imx28-duckbill-2.dtb \
-	imx28-duckbill-2-enocean.dtb \
-	imx28-duckbill-2-spi.dtb \
-	imx28-duckbill.dtb \
-	imx28-eukrea-mbmx283lc.dtb \
-	imx28-eukrea-mbmx287lc.dtb \
-	imx28-evk.dtb \
-	imx28-m28cu3.dtb \
-	imx28-m28evk.dtb \
-	imx28-sps1.dtb \
-	imx28-ts4600.dtb \
-	imx28-tx28.dtb \
-	imx28-xea.dtb
-dtb-$(CONFIG_ARCH_NOMADIK) += \
-	ste-nomadik-s8815.dtb \
-	ste-nomadik-nhk15.dtb
-dtb-$(CONFIG_ARCH_NSPIRE) += \
-	nspire-cx.dtb \
-	nspire-tp.dtb \
-	nspire-clp.dtb
-dtb-$(CONFIG_ARCH_OMAP2) += \
-	omap2420-h4.dtb \
-	omap2420-n800.dtb \
-	omap2420-n810.dtb \
-	omap2420-n810-wimax.dtb \
-	omap2430-sdp.dtb
-dtb-$(CONFIG_ARCH_OMAP3) += \
-	am3517-craneboard.dtb \
-	am3517-evm.dtb \
-	am3517_mt_ventoux.dtb \
-	logicpd-torpedo-37xx-devkit.dtb \
-	logicpd-som-lv-37xx-devkit.dtb \
-	omap3430-sdp.dtb \
-	omap3-beagle.dtb \
-	omap3-beagle-ab4.dtb \
-	omap3-beagle-xm.dtb \
-	omap3-beagle-xm-ab.dtb \
-	omap3-cm-t3517.dtb \
-	omap3-cm-t3530.dtb \
-	omap3-cm-t3730.dtb \
-	omap3-devkit8000.dtb \
-	omap3-devkit8000-lcd43.dtb \
-	omap3-devkit8000-lcd70.dtb \
-	omap3-echo.dtb \
-	omap3-evm.dtb \
-	omap3-evm-37xx.dtb \
-	omap3-gta04a3.dtb \
-	omap3-gta04a4.dtb \
-	omap3-gta04a5.dtb \
-	omap3-gta04a5one.dtb \
-	omap3-ha.dtb \
-	omap3-ha-lcd.dtb \
-	omap3-igep0020.dtb \
-	omap3-igep0020-rev-f.dtb \
-	omap3-igep0030.dtb \
-	omap3-igep0030-rev-g.dtb \
-	omap3-ldp.dtb \
-	omap3-lilly-dbb056.dtb \
-	omap3-n900.dtb \
-	omap3-n9.dtb \
-	omap3-n950.dtb \
-	omap3-overo-alto35.dtb \
-	omap3-overo-chestnut43.dtb \
-	omap3-overo-gallop43.dtb \
-	omap3-overo-palo35.dtb \
-	omap3-overo-palo43.dtb \
-	omap3-overo-storm-alto35.dtb \
-	omap3-overo-storm-chestnut43.dtb \
-	omap3-overo-storm-gallop43.dtb \
-	omap3-overo-storm-palo35.dtb \
-	omap3-overo-storm-palo43.dtb \
-	omap3-overo-storm-summit.dtb \
-	omap3-overo-storm-tobi.dtb \
-	omap3-overo-storm-tobiduo.dtb \
-	omap3-overo-summit.dtb \
-	omap3-overo-tobi.dtb \
-	omap3-overo-tobiduo.dtb \
-	omap3-pandora-600mhz.dtb \
-	omap3-pandora-1ghz.dtb \
-	omap3-sbc-t3517.dtb \
-	omap3-sbc-t3530.dtb \
-	omap3-sbc-t3730.dtb \
-	omap3-sniper.dtb \
-	omap3-thunder.dtb \
-	omap3-zoom3.dtb
-dtb-$(CONFIG_SOC_TI81XX) += \
-	am3874-iceboard.dtb \
-	dm8148-evm.dtb \
-	dm8148-t410.dtb \
-	dm8168-evm.dtb \
-	dra62x-j5eco-evm.dtb
-dtb-$(CONFIG_SOC_AM33XX) += \
-	am335x-baltos-ir2110.dtb \
-	am335x-baltos-ir3220.dtb \
-	am335x-baltos-ir5221.dtb \
-	am335x-base0033.dtb \
-	am335x-bone.dtb \
-	am335x-boneblack.dtb \
-	am335x-boneblack-wireless.dtb \
-	am335x-boneblue.dtb \
-	am335x-bonegreen.dtb \
-	am335x-bonegreen-wireless.dtb \
-	am335x-chiliboard.dtb \
-	am335x-cm-t335.dtb \
-	am335x-evm.dtb \
-	am335x-evmsk.dtb \
-	am335x-guardian.dtb \
-	am335x-icev2.dtb \
-	am335x-lxm.dtb \
-	am335x-moxa-uc-2101.dtb \
-	am335x-moxa-uc-8100-me-t.dtb \
-	am335x-myirtech-myd.dtb \
-	am335x-nano.dtb \
-	am335x-netcan-plus-1xx.dtb \
-	am335x-netcom-plus-2xx.dtb \
-	am335x-netcom-plus-8xx.dtb \
-	am335x-pdu001.dtb \
-	am335x-pepper.dtb \
-	am335x-phycore-rdk.dtb \
-	am335x-pocketbeagle.dtb \
-	am335x-regor-rdk.dtb \
-	am335x-sancloud-bbe.dtb \
-	am335x-sancloud-bbe-lite.dtb \
-	am335x-sancloud-bbe-extended-wifi.dtb \
-	am335x-shc.dtb \
-	am335x-sbc-t335.dtb \
-	am335x-sl50.dtb \
-	am335x-wega-rdk.dtb \
-	am335x-osd3358-sm-red.dtb
-dtb-$(CONFIG_ARCH_OMAP4) += \
-	omap4-droid-bionic-xt875.dtb \
-	omap4-droid4-xt894.dtb \
-	omap4-duovero-parlor.dtb \
-	omap4-kc1.dtb \
-	omap4-panda.dtb \
-	omap4-panda-a4.dtb \
-	omap4-panda-es.dtb \
-	omap4-sdp.dtb \
-	omap4-sdp-es23plus.dtb \
-	omap4-var-dvk-om44.dtb \
-	omap4-var-stk-om44.dtb
-dtb-$(CONFIG_SOC_AM43XX) += \
-	am43x-epos-evm.dtb \
-	am437x-cm-t43.dtb \
-	am437x-gp-evm.dtb \
-	am437x-idk-evm.dtb \
-	am437x-sbc-t43.dtb \
-	am437x-sk-evm.dtb
-dtb-$(CONFIG_SOC_OMAP5) += \
-	omap5-cm-t54.dtb \
-	omap5-igep0050.dtb \
-	omap5-sbc-t54.dtb \
-	omap5-uevm.dtb
-am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo
-am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo
-dtb-$(CONFIG_SOC_DRA7XX) += \
-	am57xx-beagle-x15.dtb \
-	am57xx-beagle-x15-revb1.dtb \
-	am57xx-beagle-x15-revc.dtb \
-	am57xx-evm.dtb \
-	am57xx-evm-reva3.dtb \
-	am5729-beagleboneai.dtb \
-	am57xx-cl-som-am57x.dtb \
-	am57xx-sbc-am57x.dtb \
-	am572x-idk.dtb \
-	am572x-idk-touchscreen.dtbo \
-	am571x-idk.dtb \
-	am571x-idk-touchscreen.dtbo \
-	am574x-idk.dtb \
-	am57xx-idk-lcd-osd101t2045.dtbo \
-	am57xx-idk-lcd-osd101t2587.dtbo \
-	dra7-evm.dtb \
-	dra72-evm.dtb \
-	dra72-evm-revc.dtb \
-	dra71-evm.dtb \
-	dra76-evm.dtb
-dtb-$(CONFIG_ARCH_ORION5X) += \
-	orion5x-kuroboxpro.dtb \
-	orion5x-lacie-d2-network.dtb \
-	orion5x-lacie-ethernet-disk-mini-v2.dtb \
-	orion5x-linkstation-lsgl.dtb \
-	orion5x-linkstation-lswtgl.dtb \
-	orion5x-linkstation-lschl.dtb \
-	orion5x-lswsgl.dtb \
-	orion5x-maxtor-shared-storage-2.dtb \
-	orion5x-netgear-wnr854t.dtb \
-	orion5x-rd88f5182-nas.dtb
-dtb-$(CONFIG_ARCH_ACTIONS) += \
-	owl-s500-cubieboard6.dtb \
-	owl-s500-guitar-bb-rev-b.dtb \
-	owl-s500-labrador-base-m.dtb \
-	owl-s500-roseapplepi.dtb \
-	owl-s500-sparky.dtb
-dtb-$(CONFIG_ARCH_PXA) += \
-	pxa300-raumfeld-connector.dtb \
-	pxa300-raumfeld-controller.dtb \
-	pxa300-raumfeld-speaker-l.dtb \
-	pxa300-raumfeld-speaker-m.dtb \
-	pxa300-raumfeld-speaker-one.dtb \
-	pxa300-raumfeld-speaker-s.dtb
-dtb-$(CONFIG_ARCH_QCOM) += \
-	qcom-apq8016-sbc.dtb \
-	qcom-apq8026-asus-sparrow.dtb \
-	qcom-apq8026-huawei-sturgeon.dtb \
-	qcom-apq8026-lg-lenok.dtb \
-	qcom-apq8026-samsung-matisse-wifi.dtb \
-	qcom-apq8060-dragonboard.dtb \
-	qcom-apq8064-cm-qs600.dtb \
-	qcom-apq8064-ifc6410.dtb \
-	qcom-apq8064-sony-xperia-lagan-yuga.dtb \
-	qcom-apq8064-asus-nexus7-flo.dtb \
-	qcom-apq8074-dragonboard.dtb \
-	qcom-apq8084-ifc6540.dtb \
-	qcom-apq8084-mtp.dtb \
-	qcom-ipq4018-ap120c-ac.dtb \
-	qcom-ipq4018-ap120c-ac-bit.dtb \
-	qcom-ipq4018-jalapeno.dtb \
-	qcom-ipq4019-ap.dk01.1-c1.dtb \
-	qcom-ipq4019-ap.dk04.1-c1.dtb \
-	qcom-ipq4019-ap.dk04.1-c3.dtb \
-	qcom-ipq4019-ap.dk07.1-c1.dtb \
-	qcom-ipq4019-ap.dk07.1-c2.dtb \
-	qcom-ipq8064-ap148.dtb \
-	qcom-ipq8064-rb3011.dtb \
-	qcom-msm8226-samsung-s3ve3g.dtb \
-	qcom-msm8660-surf.dtb \
-	qcom-msm8916-samsung-e5.dtb \
-	qcom-msm8916-samsung-e7.dtb \
-	qcom-msm8916-samsung-grandmax.dtb \
-	qcom-msm8916-samsung-serranove.dtb \
-	qcom-msm8960-cdp.dtb \
-	qcom-msm8974-lge-nexus5-hammerhead.dtb \
-	qcom-msm8974-sony-xperia-rhine-amami.dtb \
-	qcom-msm8974-sony-xperia-rhine-honami.dtb \
-	qcom-msm8974pro-fairphone-fp2.dtb \
-	qcom-msm8974pro-oneplus-bacon.dtb \
-	qcom-msm8974pro-samsung-klte.dtb \
-	qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
-	qcom-mdm9615-wp8548-mangoh-green.dtb \
-	qcom-sdx55-mtp.dtb \
-	qcom-sdx55-t55.dtb \
-	qcom-sdx55-telit-fn980-tlb.dtb \
-	qcom-sdx65-mtp.dtb
-dtb-$(CONFIG_ARCH_RDA) += \
-	rda8810pl-orangepi-2g-iot.dtb \
-	rda8810pl-orangepi-i96.dtb
-dtb-$(CONFIG_ARCH_REALTEK) += \
-	rtd1195-horseradish.dtb \
-	rtd1195-mele-x1000.dtb
-dtb-$(CONFIG_ARCH_REALVIEW) += \
-	arm-realview-pb1176.dtb \
-	arm-realview-pb11mp.dtb \
-	arm-realview-eb.dtb \
-	arm-realview-eb-bbrevd.dtb \
-	arm-realview-eb-11mp.dtb \
-	arm-realview-eb-11mp-bbrevd.dtb \
-	arm-realview-eb-11mp-ctrevb.dtb \
-	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
-	arm-realview-eb-a9mp.dtb \
-	arm-realview-eb-a9mp-bbrevd.dtb \
-	arm-realview-pba8.dtb \
-	arm-realview-pbx-a9.dtb
-dtb-$(CONFIG_ARCH_RENESAS) += \
-	emev2-kzm9d.dtb \
-	r7s72100-genmai.dtb \
-	r7s72100-gr-peach.dtb \
-	r7s72100-rskrza1.dtb \
-	r7s9210-rza2mevb.dtb \
-	r8a73a4-ape6evm.dtb \
-	r8a7740-armadillo800eva.dtb \
-	r8a7742-iwg21d-q7.dtb \
-	r8a7742-iwg21d-q7-dbcm-ca.dtb \
-	r8a7743-iwg20d-q7.dtb \
-	r8a7743-iwg20d-q7-dbcm-ca.dtb \
-	r8a7743-sk-rzg1m.dtb \
-	r8a7744-iwg20d-q7.dtb \
-	r8a7744-iwg20d-q7-dbcm-ca.dtb \
-	r8a7745-iwg22d-sodimm.dtb \
-	r8a7745-iwg22d-sodimm-dbhd-ca.dtb \
-	r8a7745-sk-rzg1e.dtb \
-	r8a77470-iwg23s-sbc.dtb \
-	r8a7778-bockw.dtb \
-	r8a7779-marzen.dtb \
-	r8a7790-lager.dtb \
-	r8a7790-stout.dtb \
-	r8a7791-koelsch.dtb \
-	r8a7791-porter.dtb \
-	r8a7792-blanche.dtb \
-	r8a7792-wheat.dtb \
-	r8a7793-gose.dtb \
-	r8a7794-alt.dtb \
-	r8a7794-silk.dtb \
-	r9a06g032-rzn1d400-db.dtb \
-	sh73a0-kzm9g.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += \
-	rv1108-elgin-r1.dtb \
-	rv1108-evb.dtb \
-	rv1126-edgeble-neu2-io.dtb \
-	rk3036-evb.dtb \
-	rk3036-kylin.dtb \
-	rk3066a-bqcurie2.dtb \
-	rk3066a-marsboard.dtb \
-	rk3066a-mk808.dtb \
-	rk3066a-rayeager.dtb \
-	rk3128-evb.dtb \
-	rk3188-bqedison2qc.dtb \
-	rk3188-px3-evb.dtb \
-	rk3188-radxarock.dtb \
-	rk3228-evb.dtb \
-	rk3229-evb.dtb \
-	rk3229-xms6.dtb \
-	rk3288-evb-act8846.dtb \
-	rk3288-evb-rk808.dtb \
-	rk3288-firefly-beta.dtb \
-	rk3288-firefly.dtb \
-	rk3288-firefly-reload.dtb \
-	rk3288-miqi.dtb \
-	rk3288-phycore-rdk.dtb \
-	rk3288-popmetal.dtb \
-	rk3288-r89.dtb \
-	rk3288-rock2-square.dtb \
-	rk3288-rock-pi-n8.dtb \
-	rk3288-tinker.dtb \
-	rk3288-tinker-s.dtb \
-	rk3288-veyron-brain.dtb \
-	rk3288-veyron-fievel.dtb \
-	rk3288-veyron-jaq.dtb \
-	rk3288-veyron-jerry.dtb \
-	rk3288-veyron-mickey.dtb \
-	rk3288-veyron-mighty.dtb \
-	rk3288-veyron-minnie.dtb \
-	rk3288-veyron-pinky.dtb \
-	rk3288-veyron-speedy.dtb \
-	rk3288-veyron-tiger.dtb \
-	rk3288-vyasa.dtb
-dtb-$(CONFIG_ARCH_S3C64XX) += \
-	s3c6410-mini6410.dtb \
-	s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_S5PV210) += \
-	s5pv210-aquila.dtb \
-	s5pv210-fascinate4g.dtb \
-	s5pv210-galaxys.dtb \
-	s5pv210-goni.dtb \
-	s5pv210-smdkc110.dtb \
-	s5pv210-smdkv210.dtb \
-	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
-	socfpga_arria5_socdk.dtb \
-	socfpga_arria10_chameleonv3.dtb \
-	socfpga_arria10_mercury_pe1.dtb \
-	socfpga_arria10_socdk_nand.dtb \
-	socfpga_arria10_socdk_qspi.dtb \
-	socfpga_arria10_socdk_sdmmc.dtb \
-	socfpga_cyclone5_chameleon96.dtb \
-	socfpga_cyclone5_mcvevk.dtb \
-	socfpga_cyclone5_socdk.dtb \
-	socfpga_cyclone5_de0_nano_soc.dtb \
-	socfpga_cyclone5_sockit.dtb \
-	socfpga_cyclone5_socrates.dtb \
-	socfpga_cyclone5_sodia.dtb \
-	socfpga_cyclone5_vining_fpga.dtb \
-	socfpga_vt.dtb
-dtb-$(CONFIG_ARCH_SPEAR13XX) += \
-	spear1310-evb.dtb \
-	spear1340-evb.dtb
-dtb-$(CONFIG_ARCH_SPEAR3XX) += \
-	spear300-evb.dtb \
-	spear310-evb.dtb \
-	spear320-evb.dtb \
-	spear320-hmi.dtb
-dtb-$(CONFIG_ARCH_SPEAR6XX) += \
-	spear600-evb.dtb
-dtb-$(CONFIG_ARCH_STI) += \
-	stih407-b2120.dtb \
-	stih410-b2120.dtb \
-	stih410-b2260.dtb \
-	stih418-b2199.dtb \
-	stih418-b2264.dtb
-dtb-$(CONFIG_ARCH_STM32) += \
-	stm32f429-disco.dtb \
-	stm32f469-disco.dtb \
-	stm32f746-disco.dtb \
-	stm32f769-disco.dtb \
-	stm32429i-eval.dtb \
-	stm32746g-eval.dtb \
-	stm32h743i-eval.dtb \
-	stm32h743i-disco.dtb \
-	stm32h750i-art-pi.dtb \
-	stm32mp135f-dk.dtb \
-	stm32mp151a-prtt1a.dtb \
-	stm32mp151a-prtt1c.dtb \
-	stm32mp151a-prtt1s.dtb \
-	stm32mp151a-dhcor-testbench.dtb \
-	stm32mp153c-dhcom-drc02.dtb \
-	stm32mp153c-dhcor-drc-compact.dtb \
-	stm32mp157a-avenger96.dtb \
-	stm32mp157a-dhcor-avenger96.dtb \
-	stm32mp157a-dk1.dtb \
-	stm32mp157a-dk1-scmi.dtb \
-	stm32mp157a-iot-box.dtb \
-	stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
-	stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
-	stm32mp157a-icore-stm32mp1-ctouch2.dtb \
-	stm32mp157a-icore-stm32mp1-ctouch2-of10.dtb \
-	stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
-	stm32mp157a-stinger96.dtb \
-	stm32mp157c-dhcom-pdk2.dtb \
-	stm32mp157c-dhcom-picoitx.dtb \
-	stm32mp157c-dk2.dtb \
-	stm32mp157c-dk2-scmi.dtb \
-	stm32mp157c-ed1.dtb \
-	stm32mp157c-ed1-scmi.dtb \
-	stm32mp157c-emsbc-argon.dtb \
-	stm32mp157c-ev1.dtb \
-	stm32mp157c-ev1-scmi.dtb \
-	stm32mp157c-lxa-mc1.dtb \
-	stm32mp157c-odyssey.dtb
-dtb-$(CONFIG_MACH_SUN4I) += \
-	sun4i-a10-a1000.dtb \
-	sun4i-a10-ba10-tvbox.dtb \
-	sun4i-a10-chuwi-v7-cw0825.dtb \
-	sun4i-a10-cubieboard.dtb \
-	sun4i-a10-dserve-dsrv9703c.dtb \
-	sun4i-a10-gemei-g9.dtb \
-	sun4i-a10-hackberry.dtb \
-	sun4i-a10-hyundai-a7hd.dtb \
-	sun4i-a10-inet1.dtb \
-	sun4i-a10-inet97fv2.dtb \
-	sun4i-a10-inet9f-rev03.dtb \
-	sun4i-a10-itead-iteaduino-plus.dtb \
-	sun4i-a10-jesurun-q5.dtb \
-	sun4i-a10-marsboard.dtb \
-	sun4i-a10-mini-xplus.dtb \
-	sun4i-a10-mk802.dtb \
-	sun4i-a10-mk802ii.dtb \
-	sun4i-a10-olinuxino-lime.dtb \
-	sun4i-a10-pcduino.dtb \
-	sun4i-a10-pcduino2.dtb \
-	sun4i-a10-pov-protab2-ips9.dtb \
-	sun4i-a10-topwise-a721.dtb
-dtb-$(CONFIG_MACH_SUN5I) += \
-	sun5i-a10s-auxtek-t003.dtb \
-	sun5i-a10s-auxtek-t004.dtb \
-	sun5i-a10s-mk802.dtb \
-	sun5i-a10s-olinuxino-micro.dtb \
-	sun5i-a10s-r7-tv-dongle.dtb \
-	sun5i-a10s-wobo-i5.dtb \
-	sun5i-a13-difrnce-dit4350.dtb \
-	sun5i-a13-empire-electronix-d709.dtb \
-	sun5i-a13-empire-electronix-m712.dtb \
-	sun5i-a13-hsg-h702.dtb \
-	sun5i-a13-inet-98v-rev2.dtb \
-	sun5i-a13-licheepi-one.dtb \
-	sun5i-a13-olinuxino.dtb \
-	sun5i-a13-olinuxino-micro.dtb \
-	sun5i-a13-pocketbook-touch-lux-3.dtb \
-	sun5i-a13-q8-tablet.dtb \
-	sun5i-a13-utoo-p66.dtb \
-	sun5i-gr8-chip-pro.dtb \
-	sun5i-gr8-evb.dtb \
-	sun5i-r8-chip.dtb
-dtb-$(CONFIG_MACH_SUN6I) += \
-	sun6i-a31-app4-evb1.dtb \
-	sun6i-a31-colombus.dtb \
-	sun6i-a31-hummingbird.dtb \
-	sun6i-a31-i7.dtb \
-	sun6i-a31-m9.dtb \
-	sun6i-a31-mele-a1000g-quad.dtb \
-	sun6i-a31s-colorfly-e708-q1.dtb \
-	sun6i-a31s-cs908.dtb \
-	sun6i-a31s-inet-q972.dtb \
-	sun6i-a31s-primo81.dtb \
-	sun6i-a31s-sina31s.dtb \
-	sun6i-a31s-sinovoip-bpi-m2.dtb \
-	sun6i-a31s-yones-toptech-bs1078-v2.dtb
-dtb-$(CONFIG_MACH_SUN7I) += \
-	sun7i-a20-bananapi.dtb \
-	sun7i-a20-bananapi-m1-plus.dtb \
-	sun7i-a20-bananapro.dtb \
-	sun7i-a20-cubieboard2.dtb \
-	sun7i-a20-cubietruck.dtb \
-	sun7i-a20-haoyu-marsboard.dtb \
-	sun7i-a20-hummingbird.dtb \
-	sun7i-a20-itead-ibox.dtb \
-	sun7i-a20-i12-tvbox.dtb \
-	sun7i-a20-icnova-swac.dtb \
-	sun7i-a20-lamobo-r1.dtb \
-	sun7i-a20-linutronix-testbox-v2.dtb \
-	sun7i-a20-m3.dtb \
-	sun7i-a20-mk808c.dtb \
-	sun7i-a20-olimex-som-evb.dtb \
-	sun7i-a20-olimex-som-evb-emmc.dtb \
-	sun7i-a20-olimex-som204-evb.dtb \
-	sun7i-a20-olimex-som204-evb-emmc.dtb \
-	sun7i-a20-olinuxino-lime.dtb \
-	sun7i-a20-olinuxino-lime-emmc.dtb \
-	sun7i-a20-olinuxino-lime2.dtb \
-	sun7i-a20-olinuxino-lime2-emmc.dtb \
-	sun7i-a20-olinuxino-micro.dtb \
-	sun7i-a20-olinuxino-micro-emmc.dtb \
-	sun7i-a20-orangepi.dtb \
-	sun7i-a20-orangepi-mini.dtb \
-	sun7i-a20-pcduino3.dtb \
-	sun7i-a20-pcduino3-nano.dtb \
-	sun7i-a20-wexler-tab7200.dtb \
-	sun7i-a20-wits-pro-a20-dkt.dtb
-dtb-$(CONFIG_MACH_SUN8I) += \
-	sun8i-a23-evb.dtb \
-	sun8i-a23-gt90h-v4.dtb \
-	sun8i-a23-inet86dz.dtb \
-	sun8i-a23-ippo-q8h-v5.dtb \
-	sun8i-a23-ippo-q8h-v1.2.dtb \
-	sun8i-a23-polaroid-mid2407pxe03.dtb \
-	sun8i-a23-polaroid-mid2809pxe04.dtb \
-	sun8i-a23-q8-tablet.dtb \
-	sun8i-a33-et-q8-v1.6.dtb \
-	sun8i-a33-ga10h-v1.1.dtb \
-	sun8i-a33-inet-d978-rev2.dtb \
-	sun8i-a33-ippo-q8h-v1.2.dtb \
-	sun8i-a33-olinuxino.dtb \
-	sun8i-a33-q8-tablet.dtb \
-	sun8i-a33-sinlinx-sina33.dtb \
-	sun8i-a83t-allwinner-h8homlet-v2.dtb \
-	sun8i-a83t-bananapi-m3.dtb \
-	sun8i-a83t-cubietruck-plus.dtb \
-	sun8i-a83t-tbs-a711.dtb \
-	sun8i-h2-plus-bananapi-m2-zero.dtb \
-	sun8i-h2-plus-libretech-all-h3-cc.dtb \
-	sun8i-h2-plus-orangepi-r1.dtb \
-	sun8i-h2-plus-orangepi-zero.dtb \
-	sun8i-h3-bananapi-m2-plus.dtb \
-	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
-	sun8i-h3-beelink-x2.dtb \
-	sun8i-h3-libretech-all-h3-cc.dtb \
-	sun8i-h3-mapleboard-mp130.dtb \
-	sun8i-h3-nanopi-duo2.dtb \
-	sun8i-h3-nanopi-m1.dtb	\
-	sun8i-h3-nanopi-m1-plus.dtb \
-	sun8i-h3-nanopi-neo.dtb \
-	sun8i-h3-nanopi-neo-air.dtb \
-	sun8i-h3-nanopi-r1.dtb \
-	sun8i-h3-orangepi-2.dtb \
-	sun8i-h3-orangepi-lite.dtb \
-	sun8i-h3-orangepi-one.dtb \
-	sun8i-h3-orangepi-pc.dtb \
-	sun8i-h3-orangepi-pc-plus.dtb \
-	sun8i-h3-orangepi-plus.dtb \
-	sun8i-h3-orangepi-plus2e.dtb \
-	sun8i-h3-orangepi-zero-plus2.dtb \
-	sun8i-h3-rervision-dvk.dtb \
-	sun8i-h3-zeropi.dtb \
-	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
-	sun8i-r16-bananapi-m2m.dtb \
-	sun8i-r16-nintendo-nes-classic.dtb \
-	sun8i-r16-nintendo-super-nes-classic.dtb \
-	sun8i-r16-parrot.dtb \
-	sun8i-r40-bananapi-m2-ultra.dtb \
-	sun8i-r40-oka40i-c.dtb \
-	sun8i-s3-elimo-initium.dtb \
-	sun8i-s3-lichee-zero-plus.dtb \
-	sun8i-s3-pinecube.dtb \
-	sun8i-t113s-mangopi-mq-r-t113.dtb \
-	sun8i-t3-cqa3t-bv3.dtb \
-	sun8i-v3-sl631-imx179.dtb \
-	sun8i-v3s-licheepi-zero.dtb \
-	sun8i-v3s-licheepi-zero-dock.dtb \
-	sun8i-v40-bananapi-m2-berry.dtb
-dtb-$(CONFIG_MACH_SUN9I) += \
-	sun9i-a80-optimus.dtb \
-	sun9i-a80-cubieboard4.dtb
-dtb-$(CONFIG_MACH_SUNIV) += \
-	suniv-f1c100s-licheepi-nano.dtb \
-	suniv-f1c200s-lctech-pi.dtb \
-	suniv-f1c200s-popstick-v1.1.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
-	tegra20-acer-a500-picasso.dtb \
-	tegra20-asus-tf101.dtb \
-	tegra20-harmony.dtb \
-	tegra20-colibri-eval-v3.dtb \
-	tegra20-colibri-iris.dtb \
-	tegra20-medcom-wide.dtb \
-	tegra20-paz00.dtb \
-	tegra20-plutux.dtb \
-	tegra20-seaboard.dtb \
-	tegra20-tec.dtb \
-	tegra20-trimslice.dtb \
-	tegra20-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
-	tegra30-apalis-eval.dtb \
-	tegra30-apalis-v1.1-eval.dtb \
-	tegra30-asus-nexus7-grouper-PM269.dtb \
-	tegra30-asus-nexus7-grouper-E1565.dtb \
-	tegra30-asus-nexus7-tilapia-E1565.dtb \
-	tegra30-asus-tf201.dtb \
-	tegra30-asus-tf300t.dtb \
-	tegra30-asus-tf300tg.dtb \
-	tegra30-asus-tf700t.dtb \
-	tegra30-beaver.dtb \
-	tegra30-cardhu-a02.dtb \
-	tegra30-cardhu-a04.dtb \
-	tegra30-colibri-eval-v3.dtb \
-	tegra30-ouya.dtb \
-	tegra30-pegatron-chagall.dtb
-dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
-	tegra114-asus-tf701t.dtb \
-	tegra114-dalmore.dtb \
-	tegra114-roth.dtb \
-	tegra114-tn7.dtb
-dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
-	tegra124-apalis-eval.dtb \
-	tegra124-apalis-v1.2-eval.dtb \
-	tegra124-jetson-tk1.dtb \
-	tegra124-nyan-big.dtb \
-	tegra124-nyan-big-fhd.dtb \
-	tegra124-nyan-blaze.dtb \
-	tegra124-venice2.dtb
-dtb-$(CONFIG_ARCH_U8500) += \
-	ste-snowball.dtb \
-	ste-hrefprev60-stuib.dtb \
-	ste-hrefprev60-tvk.dtb \
-	ste-hrefv60plus-stuib.dtb \
-	ste-hrefv60plus-tvk.dtb \
-	ste-href520-tvk.dtb \
-	ste-ux500-samsung-golden.dtb \
-	ste-ux500-samsung-janice.dtb \
-	ste-ux500-samsung-gavini.dtb \
-	ste-ux500-samsung-codina.dtb \
-	ste-ux500-samsung-codina-tmo.dtb \
-	ste-ux500-samsung-skomer.dtb \
-	ste-ux500-samsung-kyle.dtb
-dtb-$(CONFIG_ARCH_UNIPHIER) += \
-	uniphier-ld4-ref.dtb \
-	uniphier-ld6b-ref.dtb \
-	uniphier-pro4-ace.dtb \
-	uniphier-pro4-ref.dtb \
-	uniphier-pro4-sanji.dtb \
-	uniphier-pro5-epcore.dtb \
-	uniphier-pro5-proex.dtb \
-	uniphier-pxs2-gentil.dtb \
-	uniphier-pxs2-vodka.dtb \
-	uniphier-sld8-ref.dtb
-dtb-$(CONFIG_ARCH_VERSATILE) += \
-	versatile-ab.dtb \
-	versatile-ab-ib2.dtb \
-	versatile-pb.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += \
-	vexpress-v2p-ca5s.dtb \
-	vexpress-v2p-ca9.dtb \
-	vexpress-v2p-ca15-tc1.dtb \
-	vexpress-v2p-ca15_a7.dtb
-dtb-$(CONFIG_ARCH_VIRT) += \
-	xenvm-4.2.dtb
-dtb-$(CONFIG_ARCH_VT8500) += \
-	vt8500-bv07.dtb \
-	wm8505-ref.dtb \
-	wm8650-mid.dtb \
-	wm8750-apc8750.dtb \
-	wm8850-w70v2.dtb
-dtb-$(CONFIG_ARCH_ZYNQ) += \
-	zynq-cc108.dtb \
-	zynq-ebaz4205.dtb \
-	zynq-microzed.dtb \
-	zynq-parallella.dtb \
-	zynq-zc702.dtb \
-	zynq-zc706.dtb \
-	zynq-zc770-xm010.dtb \
-	zynq-zc770-xm011.dtb \
-	zynq-zc770-xm012.dtb \
-	zynq-zc770-xm013.dtb \
-	zynq-zed.dtb \
-	zynq-zturn.dtb \
-	zynq-zturn-v5.dtb \
-	zynq-zybo.dtb \
-	zynq-zybo-z7.dtb
-dtb-$(CONFIG_MACH_ARMADA_370) += \
-	armada-370-c200-v2.dtb \
-	armada-370-db.dtb \
-	armada-370-dlink-dns327l.dtb \
-	armada-370-mirabox.dtb \
-	armada-370-netgear-rn102.dtb \
-	armada-370-netgear-rn104.dtb \
-	armada-370-rd.dtb \
-	armada-370-seagate-nas-2bay.dtb \
-	armada-370-seagate-nas-4bay.dtb \
-	armada-370-seagate-personal-cloud.dtb \
-	armada-370-seagate-personal-cloud-2bay.dtb \
-	armada-370-synology-ds213j.dtb
-dtb-$(CONFIG_MACH_ARMADA_375) += \
-	armada-375-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_38X) += \
-	armada-381-netgear-gs110emx.dtb \
-	armada-382-rd-ac3x-48g4x2xl.dtb \
-	armada-385-atl-x530.dtb\
-	armada-385-clearfog-gtr-s4.dtb \
-	armada-385-clearfog-gtr-l8.dtb \
-	armada-385-db-88f6820-amc.dtb \
-	armada-385-db-ap.dtb \
-	armada-385-linksys-caiman.dtb \
-	armada-385-linksys-cobra.dtb \
-	armada-385-linksys-rango.dtb \
-	armada-385-linksys-shelby.dtb \
-	armada-385-synology-ds116.dtb \
-	armada-385-turris-omnia.dtb \
-	armada-388-clearfog.dtb \
-	armada-388-clearfog-base.dtb \
-	armada-388-clearfog-pro.dtb \
-	armada-388-db.dtb \
-	armada-388-gp.dtb \
-	armada-388-helios4.dtb \
-	armada-388-rd.dtb
-dtb-$(CONFIG_MACH_ARMADA_39X) += \
-	armada-398-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_XP) += \
-	armada-xp-axpwifiap.dtb \
-	armada-xp-crs305-1g-4s.dtb \
-	armada-xp-crs305-1g-4s-bit.dtb \
-	armada-xp-crs326-24g-2s.dtb \
-	armada-xp-crs326-24g-2s-bit.dtb \
-	armada-xp-crs328-4c-20s-4s.dtb \
-	armada-xp-crs328-4c-20s-4s-bit.dtb \
-	armada-xp-db.dtb \
-	armada-xp-db-dxbc2.dtb \
-	armada-xp-db-xc3-24g4xg.dtb \
-	armada-xp-gp.dtb \
-	armada-xp-lenovo-ix4-300d.dtb \
-	armada-xp-linksys-mamba.dtb \
-	armada-xp-matrix.dtb \
-	armada-xp-netgear-rn2120.dtb \
-	armada-xp-openblocks-ax3-4.dtb \
-	armada-xp-synology-ds414.dtb
-dtb-$(CONFIG_MACH_DOVE) += \
-	dove-cubox.dtb \
-	dove-cubox-es.dtb \
-	dove-d2plug.dtb \
-	dove-d3plug.dtb \
-	dove-dove-db.dtb \
-	dove-sbc-a510.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += \
-	mt2701-evb.dtb \
-	mt6580-evbp1.dtb \
-	mt6589-aquaris5.dtb \
-	mt6589-fairphone-fp1.dtb \
-	mt6592-evb.dtb \
-	mt7623a-rfb-emmc.dtb \
-	mt7623a-rfb-nand.dtb \
-	mt7623n-rfb-emmc.dtb \
-	mt7623n-bananapi-bpi-r2.dtb \
-	mt7629-rfb.dtb \
-	mt8127-moose.dtb \
-	mt8135-evbp1.dtb
-dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
-dtb-$(CONFIG_ARCH_MSTARV7) += \
-	mstar-infinity-msc313-breadbee_crust.dtb \
-	mstar-infinity2m-ssd202d-100ask-dongshanpione.dtb \
-	mstar-infinity2m-ssd202d-miyoo-mini.dtb \
-	mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dtb \
-	mstar-infinity2m-ssd202d-ssd201htv2.dtb \
-	mstar-infinity2m-ssd202d-unitv2.dtb \
-	mstar-infinity3-msc313e-breadbee.dtb \
-	mstar-mercury5-ssc8336n-midrived08.dtb
-dtb-$(CONFIG_ARCH_ASPEED) += \
-	aspeed-ast2500-evb.dtb \
-	aspeed-ast2600-evb-a1.dtb \
-	aspeed-ast2600-evb.dtb \
-	aspeed-bmc-amd-daytonax.dtb \
-	aspeed-bmc-amd-ethanolx.dtb \
-	aspeed-bmc-ampere-mtjade.dtb \
-	aspeed-bmc-ampere-mtmitchell.dtb \
-	aspeed-bmc-arm-stardragon4800-rep2.dtb \
-	aspeed-bmc-asrock-e3c246d4i.dtb \
-	aspeed-bmc-asrock-romed8hm3.dtb \
-	aspeed-bmc-bytedance-g220a.dtb \
-	aspeed-bmc-delta-ahe50dc.dtb \
-	aspeed-bmc-facebook-bletchley.dtb \
-	aspeed-bmc-facebook-cloudripper.dtb \
-	aspeed-bmc-facebook-cmm.dtb \
-	aspeed-bmc-facebook-elbert.dtb \
-	aspeed-bmc-facebook-fuji.dtb \
-	aspeed-bmc-facebook-galaxy100.dtb \
-	aspeed-bmc-facebook-greatlakes.dtb \
-	aspeed-bmc-facebook-minipack.dtb \
-	aspeed-bmc-facebook-tiogapass.dtb \
-	aspeed-bmc-facebook-wedge40.dtb \
-	aspeed-bmc-facebook-wedge100.dtb \
-	aspeed-bmc-facebook-wedge400.dtb \
-	aspeed-bmc-facebook-yamp.dtb \
-	aspeed-bmc-facebook-yosemitev2.dtb \
-	aspeed-bmc-ibm-bonnell.dtb \
-	aspeed-bmc-ibm-everest.dtb \
-	aspeed-bmc-ibm-rainier.dtb \
-	aspeed-bmc-ibm-rainier-1s4u.dtb \
-	aspeed-bmc-ibm-rainier-4u.dtb \
-	aspeed-bmc-intel-s2600wf.dtb \
-	aspeed-bmc-inspur-fp5280g2.dtb \
-	aspeed-bmc-inspur-nf5280m6.dtb \
-	aspeed-bmc-lenovo-hr630.dtb \
-	aspeed-bmc-lenovo-hr855xg2.dtb \
-	aspeed-bmc-microsoft-olympus.dtb \
-	aspeed-bmc-opp-lanyang.dtb \
-	aspeed-bmc-opp-mowgli.dtb \
-	aspeed-bmc-opp-nicole.dtb \
-	aspeed-bmc-opp-palmetto.dtb \
-	aspeed-bmc-opp-romulus.dtb \
-	aspeed-bmc-opp-swift.dtb \
-	aspeed-bmc-opp-tacoma.dtb \
-	aspeed-bmc-opp-vesnin.dtb \
-	aspeed-bmc-opp-witherspoon.dtb \
-	aspeed-bmc-opp-zaius.dtb \
-	aspeed-bmc-portwell-neptune.dtb \
-	aspeed-bmc-qcom-dc-scm-v1.dtb \
-	aspeed-bmc-quanta-q71l.dtb \
-	aspeed-bmc-quanta-s6q.dtb \
-	aspeed-bmc-supermicro-x11spi.dtb \
-	aspeed-bmc-inventec-transformers.dtb \
-	aspeed-bmc-tyan-s7106.dtb \
-	aspeed-bmc-tyan-s8036.dtb \
-	aspeed-bmc-ufispace-ncplite.dtb \
-	aspeed-bmc-vegman-n110.dtb \
-	aspeed-bmc-vegman-rx20.dtb \
-	aspeed-bmc-vegman-sx20.dtb
+subdir-y += actions
+subdir-y += airoha
+subdir-y += allwinner
+subdir-y += alphascale
+subdir-y += amazon
+subdir-y += amlogic
+subdir-y += arm
+subdir-y += aspeed
+subdir-y += axis
+subdir-y += broadcom
+subdir-y += calxeda
+subdir-y += cirrus
+subdir-y += cnxt
+subdir-y += gemini
+subdir-y += hisilicon
+subdir-y += hpe
+subdir-y += intel
+subdir-y += marvell
+subdir-y += mediatek
+subdir-y += microchip
+subdir-y += moxa
+subdir-y += nspire
+subdir-y += nuvoton
+subdir-y += nvidia
+subdir-y += nxp
+subdir-y += qcom
+subdir-y += realtek
+subdir-y += renesas
+subdir-y += rockchip
+subdir-y += samsung
+subdir-y += sigmastar
+subdir-y += socionext
+subdir-y += st
+subdir-y += sunplus
+subdir-y += synaptics
+subdir-y += ti
+subdir-y += unisoc
+subdir-y += vt8500
+subdir-y += xen
+subdir-y += xilinx
diff --git a/arch/arm/boot/dts/actions/Makefile b/arch/arm/boot/dts/actions/Makefile
new file mode 100644
index 0000000000000..f384e4a48e6f6
--- /dev/null
+++ b/arch/arm/boot/dts/actions/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ACTIONS) += \
+	owl-s500-cubieboard6.dtb \
+	owl-s500-guitar-bb-rev-b.dtb \
+	owl-s500-labrador-base-m.dtb \
+	owl-s500-roseapplepi.dtb \
+	owl-s500-sparky.dtb
diff --git a/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts
new file mode 100644
index 0000000000000..c2b02895910c5
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Cubietech CubieBoard6
+ *
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "cubietech,cubieboard6", "actions,s500";
+	model = "CubieBoard6";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts
new file mode 100644
index 0000000000000..7ae34a23e320d
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "owl-s500-guitar.dtsi"
+
+/ {
+	compatible = "lemaker,guitar-bb-rev-b", "lemaker,guitar", "actions,s500";
+	model = "LeMaker Guitar Base Board rev. B";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi b/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi
new file mode 100644
index 0000000000000..81cc39871f17d
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * LeMaker Guitar SoM
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "lemaker,guitar", "actions,s500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts
new file mode 100644
index 0000000000000..1585e33f703ba
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador Base Board
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+/dts-v1/;
+
+#include "owl-s500-labrador-v2.dtsi"
+
+/ {
+	model = "Caninos Labrador Core v2 on Labrador Base-M v1";
+	compatible = "caninos,labrador-base-m",
+		     "caninos,labrador-v2", "actions,s500";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi
new file mode 100644
index 0000000000000..883ff2f9886d1
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador SoM V2
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+	model = "Caninos Labrador Core V2.1";
+	compatible = "caninos,labrador-v2", "actions,s500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts
new file mode 100644
index 0000000000000..eb555f3852833
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Roseapple Pi
+ *
+ * Copyright (C) 2020-2021 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "roseapplepi,roseapplepi", "actions,s500";
+	model = "Roseapple Pi";
+
+	aliases {
+		mmc0 = &mmc0;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+
+	syspwr: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SYSPWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	atc260x: pmic@65 {
+		compatible = "actions,atc2603c";
+		reg = <0x65>;
+		interrupt-parent = <&sirq>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+		reset-time-sec = <6>;
+
+		regulators {
+			compatible = "actions,atc2603c-regulator";
+
+			dcdc1-supply = <&syspwr>;
+			dcdc2-supply = <&syspwr>;
+			dcdc3-supply = <&syspwr>;
+			ldo1-supply = <&syspwr>;
+			ldo2-supply = <&syspwr>;
+			ldo3-supply = <&syspwr>;
+			ldo5-supply = <&syspwr>;
+			ldo6-supply = <&syspwr>;
+			ldo7-supply = <&syspwr>;
+			ldo8-supply = <&syspwr>;
+			ldo11-supply = <&syspwr>;
+			ldo12-supply = <&syspwr>;
+			switchldo1-supply = <&vcc>;
+
+			vdd_cpu: dcdc1 {
+				regulator-name = "VDD_CPU";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			vddq: dcdc2 {
+				regulator-name = "VDDQ";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <2150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc: dcdc3 {
+				regulator-name = "VCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_3v3: ldo1 {
+				regulator-name = "VCC_3V3";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			avcc: ldo2 {
+				regulator-name = "AVCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_1v8: ldo3 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vcc_3v1: ldo5 {
+				regulator-name = "VCC_3V1";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			avdd: ldo6 {
+				regulator-name = "AVDD";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			sens_1v8: ldo7 {
+				regulator-name = "SENS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8: ldo8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			svcc: ldo11 {
+				regulator-name = "SVCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			rtc_vdd: ldo12 {
+				regulator-name = "RTC_VDD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			sd_vcc: switchldo1 {
+				regulator-name = "SD_VCC";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&pinctrl {
+	i2c0_pins: i2c0-pins {
+		pinmux {
+			groups = "i2c0_mfp";
+			function = "i2c0";
+		};
+
+		pinconf {
+			pins = "i2c0_sclk", "i2c0_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinconf {
+			pins = "i2c1_sclk", "i2c1_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinconf {
+			pins = "i2c2_sclk", "i2c2_sdata";
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins: mmc0-pins {
+		pinmux {
+			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+				 "sd0_cmd_mfp", "sd0_clk_mfp";
+			function = "sd0";
+		};
+
+		drv-pinconf {
+			groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
+			drive-strength = <8>;
+		};
+
+		bias0-pinconf {
+			pins = "sd0_d0", "sd0_d1", "sd0_d2",
+			       "sd0_d3", "sd0_cmd";
+			bias-pull-up;
+		};
+
+		bias1-pinconf {
+			pins = "sd0_clk";
+			bias-pull-down;
+		};
+	};
+
+	ethernet_pins: ethernet-pins {
+		eth_rmii-pinmux {
+			groups = "rmii_txd0_mfp", "rmii_txd1_mfp",
+				 "rmii_rxd0_mfp", "rmii_rxd1_mfp",
+				 "rmii_txen_mfp", "rmii_rxen_mfp",
+				 "rmii_crs_dv_mfp", "rmii_ref_clk_mfp";
+			function = "eth_rmii";
+		};
+
+		phy_clk-pinmux {
+			groups = "clko_25m_mfp";
+			function = "clko_25m";
+		};
+
+		ref_clk-pinconf {
+			groups = "rmii_ref_clk_drv";
+			drive-strength = <2>;
+		};
+
+	};
+};
+
+/* uSD */
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	no-sdio;
+	no-mmc;
+	no-1-8-v;
+	cd-gpios = <&pinctrl 117 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&sd_vcc>;
+	vqmmc-supply = <&sd_vcc>;
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&eth_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&pinctrl 88 GPIO_ACTIVE_LOW>; /* GPIOC24 */
+		reset-delay-us = <10000>;
+		reset-post-delay-us = <150000>;
+
+		eth_phy: ethernet-phy@3 {
+			reg = <0x3>;
+			max-speed = <100>;
+			interrupt-parent = <&sirq>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&twd_timer {
+	status = "okay";
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-sparky.dts b/arch/arm/boot/dts/actions/owl-s500-sparky.dts
new file mode 100644
index 0000000000000..9d8f7336bec04
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-sparky.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Allo.com Sparky
+ *
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "allo,sparky", "actions,s500";
+	model = "Allo.com Sparky";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 or 2 GiB */
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500.dtsi b/arch/arm/boot/dts/actions/owl-s500.dtsi
new file mode 100644
index 0000000000000..739b4b9cec8c5
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500.dtsi
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Actions Semi S500 SoC
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+#include <dt-bindings/clock/actions,s500-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/owl-s500-powergate.h>
+#include <dt-bindings/reset/actions,s500-reset.h>
+
+/ {
+	compatible = "actions,s500";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+	};
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			enable-method = "actions,s500-smp";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x1>;
+			enable-method = "actions,s500-smp";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x2>;
+			enable-method = "actions,s500-smp";
+			power-domains = <&sps S500_PD_CPU2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x3>;
+			enable-method = "actions,s500-smp";
+			power-domains = <&sps S500_PD_CPU3>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		scu: scu@b0020000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xb0020000 0x100>;
+		};
+
+		global_timer: timer@b0020200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xb0020200 0x100>;
+			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		twd_timer: timer@b0020600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xb0020600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		twd_wdt: wdt@b0020620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xb0020620 0xe0>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@b0021000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xb0021000 0x1000>,
+			      <0xb0020100 0x0100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		l2: cache-controller@b0022000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0022000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			arm,tag-latency = <3 3 2>;
+			arm,data-latency = <5 3 3>;
+		};
+
+		uart0: serial@b0120000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0120000 0x2000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@b0122000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0122000 0x2000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@b0124000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0124000 0x2000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@b0126000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0126000 0x2000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@b0128000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0128000 0x2000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@b012a000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb012a000 0x2000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@b012c000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb012c000 0x2000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART6>;
+			status = "disabled";
+		};
+
+		cmu: clock-controller@b0160000 {
+			compatible = "actions,s500-cmu";
+			reg = <0xb0160000 0x8000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@b0170000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb0170000 0x4000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@b0174000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb0174000 0x4000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@b0178000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb0178000 0x4000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@b017c000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb017c000 0x4000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sirq: interrupt-controller@b01b0200 {
+			compatible = "actions,s500-sirq";
+			reg = <0xb01b0200 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */
+		};
+
+		timer: timer@b0168000 {
+			compatible = "actions,s500-timer";
+			reg = <0xb0168000 0x8000>;
+			interrupts = <GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "2hz0", "2hz1", "timer0", "timer1";
+		};
+
+		sps: power-controller@b01b0100 {
+			compatible = "actions,s500-sps";
+			reg = <0xb01b0100 0x100>;
+			#power-domain-cells = <1>;
+		};
+
+		pinctrl: pinctrl@b01b0000 {
+			compatible = "actions,s500-pinctrl";
+			reg = <0xb01b0000 0x40>, /* GPIO */
+			      <0xb01b0040 0x10>, /* Multiplexing Control */
+			      <0xb01b0060 0x18>, /* PAD Control */
+			      <0xb01b0080 0xc>;  /* PAD Drive Capacity */
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 132>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */
+		};
+
+		dma: dma-controller@b0260000 {
+			compatible = "actions,s500-dma";
+			reg = <0xb0260000 0xd00>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <12>;
+			dma-requests = <46>;
+			clocks = <&cmu CLK_DMAC>;
+			power-domains = <&sps S500_PD_DMA>;
+		};
+
+		mmc0: mmc@b0230000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0230000 0x38>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc@b0234000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0234000 0x38>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc@b0238000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0238000 0x38>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		ethernet: ethernet@b0310000 {
+			compatible = "actions,s500-emac", "actions,owl-emac";
+			reg = <0xb0310000 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>;
+			clock-names = "eth", "rmii";
+			resets = <&cmu RESET_ETHERNET>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/airoha/Makefile b/arch/arm/boot/dts/airoha/Makefile
new file mode 100644
index 0000000000000..00c31389f622e
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
diff --git a/arch/arm/boot/dts/airoha/en7523-evb.dts b/arch/arm/boot/dts/airoha/en7523-evb.dts
new file mode 100644
index 0000000000000..f23a25cce1195
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/en7523-evb.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+	model = "Airoha EN7523 Evaluation Board";
+	compatible = "airoha,en7523-evb", "airoha,en7523";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x80200000 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/airoha/en7523.dtsi b/arch/arm/boot/dts/airoha/en7523.dtsi
new file mode 100644
index 0000000000000..b523a868c4ad1
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/en7523.dtsi
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/en7523-clk.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		npu_binary@84000000 {
+			no-map;
+			reg = <0x84000000 0xA00000>;
+		};
+
+		npu_flag@84B0000 {
+			no-map;
+			reg = <0x84B00000 0x100000>;
+		};
+
+		npu_pkt@85000000 {
+			no-map;
+			reg = <0x85000000 0x1A00000>;
+		};
+
+		npu_phyaddr@86B00000 {
+			no-map;
+			reg = <0x86B00000 0x100000>;
+		};
+
+		npu_rxdesc@86D00000 {
+			no-map;
+			reg = <0x86D00000 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	scu: system-controller@1fa20000 {
+		compatible = "airoha,en7523-scu";
+		reg = <0x1fa20000 0x400>,
+		      <0x1fb00000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@9000000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x09000000 0x20000>,
+		      <0x09080000 0x80000>,
+		      <0x09400000 0x2000>,
+		      <0x09500000 0x2000>,
+		      <0x09600000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	uart1: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <1843200>;
+		status = "okay";
+	};
+
+	gpio0: gpio@1fbf0200 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0204 0x4>,
+		      <0x1fbf0200 0x4>,
+		      <0x1fbf0220 0x4>,
+		      <0x1fbf0214 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio1: gpio@1fbf0270 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0270 0x4>,
+		      <0x1fbf0260 0x4>,
+		      <0x1fbf0264 0x4>,
+		      <0x1fbf0278 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcie0: pcie@1fa91000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa91000 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1fa92000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa92000 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts
deleted file mode 100644
index 742fcf525e1b7..0000000000000
--- a/arch/arm/boot/dts/aks-cdu.dts
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * aks-cdu.dts - Device Tree file for AK signal CDU
- *
- * Copyright (C) 2012 AK signal Brno a.s.
- *               2012 Jiri Prchal <jiri.prchal@aksignal.cz>
- */
-
-/dts-v1/;
-
-#include "ge863-pro3.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-	};
-
-	ahb {
-		apb {
-			usart0: serial@fffb0000 {
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-				};
-
-			usart2: serial@fffb8000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			nand_controller: nand-controller {
-				nand: nand@3 {
-					partitions {
-						bootstrap@0 {
-							label = "bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						uboot@40000 {
-							label = "uboot";
-							reg = <0x40000 0x80000>;
-						};
-
-						ubootenv@c0000 {
-							label = "ubootenv";
-							reg = <0xc0000 0x40000>;
-						};
-
-						kernel@100000 {
-							label = "kernel";
-							reg = <0x100000 0x400000>;
-						};
-
-						rootfs@500000 {
-							label = "rootfs";
-							reg = <0x500000 0x7b00000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		red {
-			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
-		};
-
-		green {
-			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-			default-state = "on";
-		};
-
-		yellow {
-			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		blue {
-			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
new file mode 100644
index 0000000000000..589a1ce1120aa
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/Makefile
@@ -0,0 +1,315 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-a20-adb4006.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-a20-adb4006.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
+dtb-$(CONFIG_MACH_SUN8I) += \
+	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
+	sun8i-a23-inet86dz.dtb \
+	sun8i-a23-ippo-q8h-v5.dtb \
+	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a23-polaroid-mid2407pxe03.dtb \
+	sun8i-a23-polaroid-mid2809pxe04.dtb \
+	sun8i-a23-q8-tablet.dtb \
+	sun8i-a33-et-q8-v1.6.dtb \
+	sun8i-a33-ga10h-v1.1.dtb \
+	sun8i-a33-inet-d978-rev2.dtb \
+	sun8i-a33-ippo-q8h-v1.2.dtb \
+	sun8i-a33-olinuxino.dtb \
+	sun8i-a33-q8-tablet.dtb \
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+	sun8i-a83t-bananapi-m3.dtb \
+	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-a83t-tbs-a711.dtb \
+	sun8i-h2-plus-bananapi-m2-zero.dtb \
+	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+	sun8i-h2-plus-orangepi-r1.dtb \
+	sun8i-h2-plus-orangepi-zero.dtb \
+	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
+	sun8i-h3-beelink-x2.dtb \
+	sun8i-h3-libretech-all-h3-cc.dtb \
+	sun8i-h3-mapleboard-mp130.dtb \
+	sun8i-h3-nanopi-duo2.dtb \
+	sun8i-h3-nanopi-m1.dtb \
+	sun8i-h3-nanopi-m1-plus.dtb \
+	sun8i-h3-nanopi-neo.dtb \
+	sun8i-h3-nanopi-neo-air.dtb \
+	sun8i-h3-nanopi-r1.dtb \
+	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-lite.dtb \
+	sun8i-h3-orangepi-one.dtb \
+	sun8i-h3-orangepi-pc.dtb \
+	sun8i-h3-orangepi-pc-plus.dtb \
+	sun8i-h3-orangepi-plus.dtb \
+	sun8i-h3-orangepi-plus2e.dtb \
+	sun8i-h3-orangepi-zero-plus2.dtb \
+	sun8i-h3-rervision-dvk.dtb \
+	sun8i-h3-zeropi.dtb \
+	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
+	sun8i-r16-bananapi-m2m.dtb \
+	sun8i-r16-nintendo-nes-classic.dtb \
+	sun8i-r16-nintendo-super-nes-classic.dtb \
+	sun8i-r16-parrot.dtb \
+	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-r40-oka40i-c.dtb \
+	sun8i-s3-elimo-initium.dtb \
+	sun8i-s3-lichee-zero-plus.dtb \
+	sun8i-s3-pinecube.dtb \
+	sun8i-t113s-mangopi-mq-r-t113.dtb \
+	sun8i-t3-cqa3t-bv3.dtb \
+	sun8i-v3-sl631-imx179.dtb \
+	sun8i-v3s-licheepi-zero.dtb \
+	sun8i-v3s-licheepi-zero-dock.dtb \
+	sun8i-v40-bananapi-m2-berry.dtb
+dtb-$(CONFIG_MACH_SUN8I) += \
+	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
+	sun8i-a23-inet86dz.dtb \
+	sun8i-a23-ippo-q8h-v5.dtb \
+	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a23-polaroid-mid2407pxe03.dtb \
+	sun8i-a23-polaroid-mid2809pxe04.dtb \
+	sun8i-a23-q8-tablet.dtb \
+	sun8i-a33-et-q8-v1.6.dtb \
+	sun8i-a33-ga10h-v1.1.dtb \
+	sun8i-a33-inet-d978-rev2.dtb \
+	sun8i-a33-ippo-q8h-v1.2.dtb \
+	sun8i-a33-olinuxino.dtb \
+	sun8i-a33-q8-tablet.dtb \
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+	sun8i-a83t-bananapi-m3.dtb \
+	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-a83t-tbs-a711.dtb \
+	sun8i-h2-plus-bananapi-m2-zero.dtb \
+	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+	sun8i-h2-plus-orangepi-r1.dtb \
+	sun8i-h2-plus-orangepi-zero.dtb \
+	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
+	sun8i-h3-beelink-x2.dtb \
+	sun8i-h3-libretech-all-h3-cc.dtb \
+	sun8i-h3-mapleboard-mp130.dtb \
+	sun8i-h3-nanopi-duo2.dtb \
+	sun8i-h3-nanopi-m1.dtb\
+	\
+	sun8i-h3-nanopi-m1-plus.dtb \
+	sun8i-h3-nanopi-neo.dtb \
+	sun8i-h3-nanopi-neo-air.dtb \
+	sun8i-h3-nanopi-r1.dtb \
+	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-lite.dtb \
+	sun8i-h3-orangepi-one.dtb \
+	sun8i-h3-orangepi-pc.dtb \
+	sun8i-h3-orangepi-pc-plus.dtb \
+	sun8i-h3-orangepi-plus.dtb \
+	sun8i-h3-orangepi-plus2e.dtb \
+	sun8i-h3-orangepi-zero-plus2.dtb \
+	sun8i-h3-rervision-dvk.dtb \
+	sun8i-h3-zeropi.dtb \
+	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
+	sun8i-r16-bananapi-m2m.dtb \
+	sun8i-r16-nintendo-nes-classic.dtb \
+	sun8i-r16-nintendo-super-nes-classic.dtb \
+	sun8i-r16-parrot.dtb \
+	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-r40-oka40i-c.dtb \
+	sun8i-s3-elimo-initium.dtb \
+	sun8i-s3-lichee-zero-plus.dtb \
+	sun8i-s3-pinecube.dtb \
+	sun8i-t113s-mangopi-mq-r-t113.dtb \
+	sun8i-t3-cqa3t-bv3.dtb \
+	sun8i-v3-sl631-imx179.dtb \
+	sun8i-v3s-licheepi-zero.dtb \
+	sun8i-v3s-licheepi-zero-dock.dtb \
+	sun8i-v40-bananapi-m2-berry.dtb
+dtb-$(CONFIG_MACH_SUN9I) += \
+	sun9i-a80-optimus.dtb \
+	sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_MACH_SUNIV) += \
+	suniv-f1c100s-licheepi-nano.dtb \
+	suniv-f1c200s-lctech-pi.dtb \
+	suniv-f1c200s-popstick-v1.1.dtb
+dtb-$(CONFIG_MACH_SUNIV) += \
+	suniv-f1c100s-licheepi-nano.dtb \
+	suniv-f1c200s-lctech-pi.dtb \
+	suniv-f1c200s-popstick-v1.1.dtb
diff --git a/arch/arm/boot/dts/allwinner/axp152.dtsi b/arch/arm/boot/dts/allwinner/axp152.dtsi
new file mode 100644
index 0000000000000..f90ad6c64a073
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/axp152.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&axp152 {
+	compatible = "x-powers,axp152";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/arch/arm/boot/dts/allwinner/axp209.dtsi b/arch/arm/boot/dts/allwinner/axp209.dtsi
new file mode 100644
index 0000000000000..469d0f7d5185c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/axp209.dtsi
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP202/209 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP20X.php
+ * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
+ */
+
+/ {
+	pmic-temp {
+		compatible = "iio-hwmon";
+		io-channels = <&axp_adc 4>; /* Internal temperature */
+	};
+};
+
+&axp209 {
+	compatible = "x-powers,axp209";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power {
+		compatible = "x-powers,axp202-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp209-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp209-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	battery_power_supply: battery-power {
+		compatible = "x-powers,axp209-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <1500>;
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_ldo1: ldo1 {
+			/* LDO1 is a fixed output regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-name = "ldo1";
+		};
+
+		reg_ldo2: ldo2 {
+			regulator-name = "ldo2";
+		};
+
+		reg_ldo3: ldo3 {
+			regulator-name = "ldo3";
+		};
+
+		reg_ldo4: ldo4 {
+			regulator-name = "ldo4";
+		};
+
+		reg_ldo5: ldo5 {
+			regulator-name = "ldo5";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power {
+		compatible = "x-powers,axp202-usb-power-supply";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/axp223.dtsi b/arch/arm/boot/dts/allwinner/axp223.dtsi
new file mode 100644
index 0000000000000..b91b6c1278c7a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/axp223.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2016 Free Electrons
+ *
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP223-en.pdf
+ *
+ * The AXP223 shares most of its logic with the AXP221 but it has some
+ * differences, for the VBUS driver for example.
+ */
+
+#include "axp22x.dtsi"
+
+&usb_power_supply {
+	compatible = "x-powers,axp223-usb-power-supply";
+};
diff --git a/arch/arm/boot/dts/allwinner/axp22x.dtsi b/arch/arm/boot/dts/allwinner/axp22x.dtsi
new file mode 100644
index 0000000000000..f79650afd0a76
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/axp22x.dtsi
@@ -0,0 +1,176 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP221/221s/223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
+ */
+
+&axp22x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power {
+		compatible = "x-powers,axp221-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp221-adc";
+		#io-channel-cells = <1>;
+	};
+
+	battery_power_supply: battery-power {
+		compatible = "x-powers,axp221-battery-power-supply";
+		status = "disabled";
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+			regulator-name = "dcdc1";
+		};
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_dcdc4: dcdc4 {
+			regulator-name = "dcdc4";
+		};
+
+		reg_dcdc5: dcdc5 {
+			regulator-name = "dcdc5";
+		};
+
+		reg_dc1sw: dc1sw {
+			regulator-name = "dc1sw";
+		};
+
+		reg_dc5ldo: dc5ldo {
+			regulator-name = "dc5ldo";
+		};
+
+		reg_aldo1: aldo1 {
+			regulator-name = "aldo1";
+		};
+
+		reg_aldo2: aldo2 {
+			regulator-name = "aldo2";
+		};
+
+		reg_aldo3: aldo3 {
+			regulator-name = "aldo3";
+		};
+
+		reg_dldo1: dldo1 {
+			regulator-name = "dldo1";
+		};
+
+		reg_dldo2: dldo2 {
+			regulator-name = "dldo2";
+		};
+
+		reg_dldo3: dldo3 {
+			regulator-name = "dldo3";
+		};
+
+		reg_dldo4: dldo4 {
+			regulator-name = "dldo4";
+		};
+
+		reg_eldo1: eldo1 {
+			regulator-name = "eldo1";
+		};
+
+		reg_eldo2: eldo2 {
+			regulator-name = "eldo2";
+		};
+
+		reg_eldo3: eldo3 {
+			regulator-name = "eldo3";
+		};
+
+		reg_ldo_io0: ldo_io0 {
+			regulator-name = "ldo_io0";
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo_io1 {
+			regulator-name = "ldo_io1";
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc_ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-name = "rtc_ldo";
+		};
+
+		reg_drivevbus: drivevbus {
+			regulator-name = "drivevbus";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power {
+		compatible = "x-powers,axp221-usb-power-supply";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/axp809.dtsi b/arch/arm/boot/dts/allwinner/axp809.dtsi
new file mode 100644
index 0000000000000..d134d4c00bd86
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/axp809.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP809 Integrated Power Management Chip
+ */
+
+&axp809 {
+	compatible = "x-powers,axp809";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp809-gpio",
+			     "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/axp81x.dtsi b/arch/arm/boot/dts/allwinner/axp81x.dtsi
new file mode 100644
index 0000000000000..ebaf1c3ce8dbb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/axp81x.dtsi
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* AXP813/818 Integrated Power Management Chip */
+
+&axp81x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power {
+		compatible = "x-powers,axp813-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp813-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp813-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	battery_power_supply: battery-power {
+		compatible = "x-powers,axp813-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+		};
+
+		reg_dcdc2: dcdc2 {
+		};
+
+		reg_dcdc3: dcdc3 {
+		};
+
+		reg_dcdc4: dcdc4 {
+		};
+
+		reg_dcdc5: dcdc5 {
+		};
+
+		reg_dcdc6: dcdc6 {
+		};
+
+		reg_dcdc7: dcdc7 {
+		};
+
+		reg_aldo1: aldo1 {
+		};
+
+		reg_aldo2: aldo2 {
+		};
+
+		reg_aldo3: aldo3 {
+		};
+
+		reg_dldo1: dldo1 {
+		};
+
+		reg_dldo2: dldo2 {
+		};
+
+		reg_dldo3: dldo3 {
+		};
+
+		reg_dldo4: dldo4 {
+		};
+
+		reg_eldo1: eldo1 {
+		};
+
+		reg_eldo2: eldo2 {
+		};
+
+		reg_eldo3: eldo3 {
+		};
+
+		reg_fldo1: fldo1 {
+		};
+
+		reg_fldo2: fldo2 {
+		};
+
+		reg_fldo3: fldo3 {
+		};
+
+		reg_ldo_io0: ldo-io0 {
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo-io1 {
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc-ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		reg_sw: sw {
+		};
+
+		reg_drivevbus: drivevbus {
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power {
+		compatible = "x-powers,axp813-usb-power-supply";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts
new file mode 100644
index 0000000000000..20f9ed244851f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele A1000";
+	compatible = "mele,a1000", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "a1000:red:usr";
+			gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "a1000:blue:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts
new file mode 100644
index 0000000000000..816d534ac0939
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BA10 tvbox";
+	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts
new file mode 100644
index 0000000000000..74262988881c6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Chuwi V7 CW0825";
+	compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5306de4: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-800 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-1000 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts
new file mode 100644
index 0000000000000..0645d60642355
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cubietech Cubieboard";
+	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard>;
+
+		led-0 {
+			label = "cubieboard:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
+		};
+
+		led-1 {
+			label = "cubieboard:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_cubieboard: led-pins {
+		pins = "PH20", "PH21";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
new file mode 100644
index 0000000000000..63e77c05bfdaa
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
@@ -0,0 +1,218 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Dserve DSRV9703C";
+	compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&reg_motor>;
+		min-microvolt = <3000000>;
+		max-microvolt = <3000000>;
+	};
+
+	reg_motor: reg-motor {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-motor";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	/* pull-ups and devices require AXP209 LDO3 */
+	status = "failed";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button-800 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts
new file mode 100644
index 0000000000000..ea7a59dcf8f9a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts
@@ -0,0 +1,192 @@
+/*
+ * Copyright 2015 Priit Laes
+ *
+ * Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Gemei G9 Tablet";
+	compatible = "gemei,g9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/*
+ * TODO:
+ *   2x cameras via CSI
+ *   AXP battery management
+ *   NAND
+ *   OTG
+ *   Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
+ */
+&codec {
+	/* PH15 controls power to external amplifier (ft2012q) */
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+
+	status = "okay";
+
+	button-158 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button-349 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+
+	button-1142 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1142856>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+
+&uart0  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts
new file mode 100644
index 0000000000000..47dea0922501b
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts
@@ -0,0 +1,140 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Miniand Hackberry";
+	compatible = "miniand,hackberry", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy0>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts
new file mode 100644
index 0000000000000..bf2044bac42fb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts
@@ -0,0 +1,115 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hyundai A7HD";
+	compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts
new file mode 100644
index 0000000000000..60e432a0ef1c5
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts
@@ -0,0 +1,229 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "iNet-1";
+	compatible = "inet-tek,inet1", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0  {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5x: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
+		touchscreen-size-x = <600>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-1000 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0  {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts
new file mode 100644
index 0000000000000..76016f2ca29da
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2014 Open Source Support GmbH
+ *
+ * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "INet-97F Rev 02";
+	compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-600 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts
new file mode 100644
index 0000000000000..62e7aa587f891
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts
@@ -0,0 +1,357 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "iNet-9F Rev 03";
+	compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		event-left-joystick-left {
+			label = "Left Joystick Left";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
+		};
+
+		event-left-joystick-right {
+			label = "Left Joystick Right";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
+		};
+
+		event-left-joystick-up {
+			label = "Left Joystick Up";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
+		};
+
+		event-left-joystick-down {
+			label = "Left Joystick Down";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
+		};
+
+		event-right-joystick-left {
+			label = "Right Joystick Left";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
+		};
+
+		event-right-joystick-right {
+			label = "Right Joystick Right";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
+		};
+
+		event-right-joystick-up {
+			label = "Right Joystick Up";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
+		};
+
+		event-right-joystick-down {
+			label = "Right Joystick Down";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
+		};
+
+		event-dpad-left {
+			label = "DPad Left";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
+		};
+
+		event-dpad-right {
+			label = "DPad Right";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
+		};
+
+		event-dpad-up {
+			label = "DPad Up";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
+		};
+
+		event-dpad-down {
+			label = "DPad Down";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
+		};
+
+		event-x {
+			label = "Button X";
+			linux,code = <BTN_X>;
+			gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
+		};
+
+		event-y {
+			label = "Button Y";
+			linux,code = <BTN_Y>;
+			gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
+		};
+
+		event-a {
+			label = "Button A";
+			linux,code = <BTN_A>;
+			gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
+		};
+
+		event-b {
+			label = "Button B";
+			linux,code = <BTN_B>;
+			gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
+		};
+
+		event-select {
+			label = "Select Button";
+			linux,code = <BTN_SELECT>;
+			gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
+		};
+
+		event-start {
+			label = "Start Button";
+			linux,code = <BTN_START>;
+			gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
+		};
+
+		event-top-left {
+			label = "Top Left Button";
+			linux,code = <BTN_TL>;
+			gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
+		};
+
+		event-top-right {
+			label = "Top Right Button";
+			linux,code = <BTN_TR>;
+			gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-600 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts
new file mode 100644
index 0000000000000..d4e319d16aae7
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2015 Josef Gajdusek <atx@atx.name>
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-itead-core-common.dtsi"
+
+/ {
+	model = "Iteaduino Plus A10";
+	compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins>;
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	axp209: pmic@34 {
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts
new file mode 100644
index 0000000000000..1aeb0bd5519e1
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts
@@ -0,0 +1,181 @@
+/*
+ * Copyright 2015 Gábor Nyers
+ *
+ * Gábor Nyers <gabor.nyers@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Jesurun Q5";
+	compatible = "jesurun,q5", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "q5:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
+		};
+
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts
new file mode 100644
index 0000000000000..81fdb217d339b
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A10";
+	compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "marsboard:red1:usr";
+			gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "marsboard:red2:usr";
+			gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "marsboard:red3:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "marsboard:red4:usr";
+			gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts
new file mode 100644
index 0000000000000..f9d74e21031d5
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "PineRiver Mini X-Plus";
+	compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&ir0_rx_pins {
+	/* The ir receiver is not always populated */
+	bias-pull-up;
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts
new file mode 100644
index 0000000000000..059fe9c5d0243
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802";
+	compatible = "allwinner,mk802", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts
new file mode 100644
index 0000000000000..17dcdf0311189
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802ii";
+	compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
new file mode 100644
index 0000000000000..83d283cf66334
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A10-OLinuXino-LIME";
+	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		led {
+			label = "a10-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&cpu0 {
+	/*
+	 * The A10-Lime is known to be unstable when running at 1008 MHz
+	 */
+	operating-points =
+		/* kHz	  uV */
+		<912000	1350000>,
+		<864000	1300000>,
+		<624000	1250000>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxinolime: led-pin {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
+	usb0_vbus-supply   = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts
new file mode 100644
index 0000000000000..a332d61fd5614
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts
@@ -0,0 +1,200 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "LinkSprite pcDuino";
+	compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "pcduino:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label = "pcduino:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-back {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+
+		key-home {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+
+		key-menu {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+	usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts
new file mode 100644
index 0000000000000..bc4f128965ed5
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The LinkSprite pcDuino2 board is almost identical to the older
+ * LinkSprite pcDuino1 board. The only software visible difference
+ * is that the pcDuino2 board got a USB VBUS voltage regulator, which
+ * is controlled by the PD2 pin (pulled-up by default). Also one of
+ * the USB host ports has been replaced with a USB WIFI chip.
+ */
+
+#include "sun4i-a10-pcduino.dts"
+
+/ {
+	model = "LinkSprite pcDuino2";
+	compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc3v3>; /* USB WIFI is always on */
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
new file mode 100644
index 0000000000000..c325969476475
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
@@ -0,0 +1,206 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Point of View Protab2-IPS9";
+	compatible = "pov,protab2-ips9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	/* pull-ups and devices require AXP209 LDO3 */
+	status = "failed";
+};
+
+&i2c2 {
+	status = "okay";
+
+	touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+		enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-400 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button-800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts
new file mode 100644
index 0000000000000..3628f12d2521e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Pascal Roeleven <dev@pascalroeleven.nl>
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Topwise A721";
+	compatible = "topwise,a721", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_vbat>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		brightness-levels = <0 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	panel {
+		compatible = "starry,kr070pe2t";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_power>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_panel>;
+			};
+		};
+	};
+
+	reg_lcd_power: reg-lcd-power {
+		compatible = "regulator-fixed";
+		regulator-name = "reg-lcd-power";
+		gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+		enable-active-high;
+	};
+
+	reg_vbat: reg-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	accelerometer@4c {
+		compatible = "fsl,mma7660";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-571 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <571428>;
+	};
+
+	button-761 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <761904>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-ph-supply = <&reg_vcc3v3>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
new file mode 100644
index 0000000000000..51a6464aab9a3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
@@ -0,0 +1,1271 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1400000>,
+				<912000	1350000>,
+				<864000	1300000>,
+				<624000	1250000>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun4i-a10-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun4i-a10-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			resets = <&ccu RST_TCON0>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_TCON0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+
+					tcon0_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun4i-a10-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <45>;
+			resets = <&ccu RST_TCON1>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD1>,
+				 <&ccu CLK_TCON1_CH0>,
+				 <&ccu CLK_TCON1_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon1>;
+					};
+
+					tcon1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun4i-a10-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <53>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			interrupts = <32>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>;
+			clock-names = "ahb", "mmc";
+			interrupts = <35>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-phy";
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&ccu CLK_USB_PHY>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ccu CLK_AHB_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <64>;
+			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <86>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun4i-a10-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <58>;
+			clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <56>;
+			clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1c000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <40>;
+			clocks = <&ccu CLK_AHB_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1c400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <65>;
+			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <43>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <50>;
+			clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun4i-a10-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun4i-a10-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			can0_ph_pins: can0-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
+			emac_pins: emac0-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "emac";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			ir0_rx_pins: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			ir0_tx_pins: ir0-tx-pin {
+				pins = "PB3";
+				function = "ir0";
+			};
+
+			ir1_rx_pins: ir1-rx-pin {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			ir1_tx_pins: ir1-tx-pin {
+				pins = "PB22";
+				function = "ir1";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			ps2_ch0_pins: ps2-ch0-pins {
+				pins = "PI20", "PI21";
+				function = "ps2";
+			};
+
+			ps2_ch1_ph_pins: ps2-ch1-ph-pins {
+				pins = "PH12", "PH13";
+				function = "ps2";
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			pwm1_pin: pwm1-pin {
+				pins = "PI3";
+				function = "pwm";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PB13";
+				function = "spdif";
+				bias-pull-up;
+			};
+
+			spi0_pi_pins: spi0-pi-pins {
+				pins = "PI11", "PI12", "PI13";
+				function = "spi0";
+			};
+
+			spi0_cs0_pi_pin: spi0-cs0-pi-pin {
+				pins = "PI10";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			spi1_cs0_pin: spi1-cs0-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			spi2_pb_pins: spi2-pb-pins {
+				pins = "PB15", "PB16", "PB17";
+				function = "spi2";
+			};
+
+			spi2_pc_pins: spi2-pc-pins {
+				pins = "PC20", "PC21", "PC22";
+				function = "spi2";
+			};
+
+			spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+				pins = "PB14";
+				function = "spi2";
+			};
+
+			spi2_cs0_pc_pins: spi2-cs0-pc-pin {
+				pins = "PC19";
+				function = "spi2";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PA10", "PA11";
+				function = "uart1";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>,
+				     <23>,
+				     <24>,
+				     <25>,
+				     <67>,
+				     <68>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <24>;
+			clocks = <&osc24M>;
+		};
+
+		rtc: rtc@1c20d00 {
+			compatible = "allwinner,sun4i-a10-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <24>;
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun4i-a10-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <6>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <16>;
+			clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun4i-a10-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <17>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <18>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <19>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART7>;
+			status = "disabled";
+		};
+
+		ps20: ps2@1c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <62>;
+			clocks = <&ccu CLK_APB1_PS20>;
+			status = "disabled";
+		};
+
+		ps21: ps2@1c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <63>;
+			clocks = <&ccu CLK_APB1_PS21>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <26>;
+			clocks = <&ccu CLK_APB1_CAN>;
+			status = "disabled";
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <69>,
+				     <70>,
+				     <71>,
+				     <72>,
+				     <73>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun4i-a10-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_DRAM_DE_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun4i-a10-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <48>;
+			clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+				 <&ccu CLK_DRAM_DE_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun4i-a10-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <48>;
+			clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+				 <&ccu CLK_DRAM_DE_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be1>;
+					};
+
+					be1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun4i-a10-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+
+					be0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts
new file mode 100644
index 0000000000000..04b0e6d287696
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts
@@ -0,0 +1,137 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Auxtek t003 A10s hdmi tv-stick";
+	compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_t003>;
+
+		led {
+			label = "t003-tv-dongle:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_t003: led-pin {
+		pins = "PB2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts
new file mode 100644
index 0000000000000..667bc2dc1ea97
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Auxtek t004 A10s hdmi tv-stick";
+	compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_t004>;
+
+		led {
+			label = "t004-tv-dongle:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+			default-state = "on";
+		};
+	};
+
+	reg_vmmc1: vmmc1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vmmc1>;
+	bus-width = <4>;
+	non-removable;
+	cap-sdio-irq;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_t004: led-pin {
+		pins = "PB2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts
new file mode 100644
index 0000000000000..d0219404c2310
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802-A10s";
+	compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "mk802:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts
new file mode 100644
index 0000000000000..5832bb31fc51f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts
@@ -0,0 +1,272 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A10s-Olinuxino Micro";
+	compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		led {
+			label = "a10s-olinuxino-micro:green:usr";
+			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pa_pins>;
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp152: pmic@30 {
+		reg = <0x30>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp152.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c16";
+		pagesize = <16>;
+		reg = <0x50>;
+		read-only;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button-392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button-601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button-795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button-987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxino: led-pin {
+		pins = "PE3";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pb_pins>,
+		    <&spi2_cs0_pb_pin>;
+	status = "okay";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pc_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts
new file mode 100644
index 0000000000000..964360f0610a8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "R7 A10s hdmi tv-stick";
+	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_r7>;
+
+		led {
+			label = "r7-tv-dongle:green:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_r7: led-pin {
+		pins = "PB2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts
new file mode 100644
index 0000000000000..ef8baa9926877
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts
@@ -0,0 +1,195 @@
+/*
+ * Copyright 2015 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "A10s-Wobo i5";
+	compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "a10s-wobo-i5:blue:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pd_pins>;
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_ldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi2";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi b/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi
new file mode 100644
index 0000000000000..09c486b608b27
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/dma/sun4i-a10.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_HDMI>,
+				 <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DRAM_DE_BE>,
+				 <&ccu CLK_DE_BE>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+	};
+
+	display-engine {
+		compatible = "allwinner,sun5i-a10s-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc {
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun5i-a10s-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <58>;
+			clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun5i-a10s-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&ccu CLK_HOSC>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun5i-a10s-ccu";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&pio {
+	compatible = "allwinner,sun5i-a10s-pinctrl";
+
+	uart0_pb_pins: uart0-pb-pins {
+		pins = "PB19", "PB20";
+		function = "uart0";
+	};
+
+	uart2_pc_pins: uart2-pc-pins {
+		pins = "PC18", "PC19";
+		function = "uart2";
+	};
+
+	emac_pa_pins: emac-pa-pins {
+		pins = "PA0", "PA1", "PA2",
+				"PA3", "PA4", "PA5", "PA6",
+				"PA7", "PA8", "PA9", "PA10",
+				"PA11", "PA12", "PA13", "PA14",
+				"PA15", "PA16";
+		function = "emac";
+	};
+
+	mmc1_pins: mmc1-pins {
+		pins = "PG3", "PG4", "PG5",
+				 "PG6", "PG7", "PG8";
+		function = "mmc1";
+		drive-strength = <30>;
+	};
+
+	spi2_pb_pins: spi2-pb-pins {
+		pins = "PB12", "PB13", "PB14";
+		function = "spi2";
+	};
+
+	spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+		pins = "PB11";
+		function = "spi2";
+	};
+};
+
+&tcon0_out {
+	tcon0_out_hdmi: endpoint@2 {
+		reg = <2>;
+		remote-endpoint = <&hdmi_in_tcon0>;
+		allwinner,tcon-channel = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts
new file mode 100644
index 0000000000000..894c4c4f9a1f7
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Difrnce DIT4350";
+	compatible = "difrnce,dit4350", "allwinner,sun5i-a13";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts
new file mode 100644
index 0000000000000..d059388d7252e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts
@@ -0,0 +1,190 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Empire Electronix D709 tablet";
+	compatible = "empire-electronix,d709", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_vcc3v3>;
+		/* TODO: backlight uses axp gpio1 as enable pin */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts
new file mode 100644
index 0000000000000..b1e2afd9de52e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Empire Electronix M712 tablet";
+	compatible = "empire-electronix,m712", "allwinner,sun5i-a13";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts
new file mode 100644
index 0000000000000..9b9f2a5748515
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "HSG H702";
+	compatible = "hsg,h702", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts
new file mode 100644
index 0000000000000..439ae3b537dfa
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-98V Rev 02";
+	compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts
new file mode 100644
index 0000000000000..3a6c4bd0a44f9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts
@@ -0,0 +1,214 @@
+/*
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun5i-a13-olinuxino.dts, which is
+ *   Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *   Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Lichee Pi One";
+	compatible = "licheepi,licheepi-one", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "licheepi:red:usr";
+			gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label = "licheepi:green:usr";
+			gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-2 {
+			label = "licheepi:blue:usr";
+			gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-984 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <984126>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "csi-1.8v";
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "csi-2.8v";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts
new file mode 100644
index 0000000000000..bfe1075e62cc9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
+ * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A13-Olinuxino Micro";
+	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinom>;
+
+		led {
+			label = "a13-olinuxino-micro:green:power";
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxinom: led-pin {
+		pins = "PG9";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts
new file mode 100644
index 0000000000000..fadeae3cd8bbd
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts
@@ -0,0 +1,247 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A13-Olinuxino";
+	compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		led {
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	bridge {
+		compatible = "dumb-vga-dac";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button-392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button-601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button-795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button-987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxino: led-pin {
+		pins = "PG9";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_bridge_in>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
new file mode 100644
index 0000000000000..d60407772e5d3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2019 Ondrej Jirman <megous@megous.com>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PocketBook Touch Lux 3";
+	compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_vcc3v3>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		label = "GPIO Keys";
+
+		key-right {
+			label = "Right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */
+		};
+
+		key-left {
+			label = "Left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-1v8-nor-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1v8_nor: regulator-nor {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-nor";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+		regulator-always-on;
+	};
+
+	reg_1v8_ctp: regulator-ctp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* Touchpanel is connected here. */
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+	/* We need this otherwise the LDO3 would overload */
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>;
+	status = "okay";
+
+	epd_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25u4033", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts
new file mode 100644
index 0000000000000..f9fc1c8b60b81
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Q8 A13 Tablet";
+	compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
+
+	panel: panel {
+		compatible = "bananapi,s070wv20-ct16";
+		power-supply = <&reg_vcc3v3>;
+		enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */
+		backlight = <&backlight>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
new file mode 100644
index 0000000000000..be486d28d04fa
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Utoo P66";
+	compatible = "utoo,p66", "allwinner,sun5i-a13";
+
+	/* The P66 uses the uart pins as gpios */
+	aliases {
+		/delete-property/serial0;
+	};
+
+	chosen {
+		/delete-property/stdout-path;
+	};
+
+	i2c_lcd: i2c {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
+		scl-gpios = <&pio 6 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG10 */
+		i2c-gpio,delay-us = <5>;
+	};
+};
+
+&backlight {
+	/* Note levels of 10 / 20% result in backlight off */
+	brightness-levels = <0 30 40 50 60 70 80 90 100>;
+	default-brightness-level = <6>;
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+};
+
+&touchscreen {
+	compatible = "chipone,icn8318";
+	reg = <0x40>;
+	/* The P66 uses a different EINT then the reference design */
+	interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+	/* The icn8318 binding expects wake-gpios instead of power-gpios */
+	wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	touchscreen-size-x = <800>;
+	touchscreen-size-y = <480>;
+	touchscreen-inverted-x;
+	touchscreen-swapped-x-y;
+	status = "okay";
+};
+
+&uart1 {
+	/* The P66 uses the uart pins as gpios */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi
new file mode 100644
index 0000000000000..3325ab07094a0
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc {
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun5i-a13-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&ccu CLK_HOSC>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun5i-a13-ccu";
+};
+
+&cpu0 {
+	clock-latency = <244144>; /* 8 32k periods */
+	operating-points =
+		/* kHz	  uV */
+		<1008000 1400000>,
+		<912000 1350000>,
+		<864000 1300000>,
+		<624000 1200000>,
+		<576000 1200000>,
+		<432000 1200000>;
+	#cooling-cells = <2>;
+};
+
+&pio {
+	compatible = "allwinner,sun5i-a13-pinctrl";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts
new file mode 100644
index 0000000000000..5c3562b85a5bf
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts
@@ -0,0 +1,238 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing C.H.I.P. Pro";
+	compatible = "nextthing,chip-pro", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "chip-pro:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc0_pwrseq: mmc0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
+	status = "disabled";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>, <&pwm1_pins>;
+	status = "disabled";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the
+ * WiFi/BT chip.
+ */
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-1";
+	regulator-always-on;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+	regulator-always-on;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pd_pins>, <&uart2_cts_rts_pd_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The CHIP Pro doesn't have a controllable VBUS, nor does it
+	 * have any 5v rail on the board itself.
+	 *
+	 * If one wants to use it as a true OTG port, it should be
+	 * done in the baseboard, and its DT / overlay will add it.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts b/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts
new file mode 100644
index 0000000000000..f4fe258ef06d4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts
@@ -0,0 +1,333 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing GR8-EVB";
+	compatible = "nextthing,gr8-evb", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 10000 0>;
+		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_vcc3v3>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	sound-analog {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "gr8-evb-wm8978";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8978>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	wm8978: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button-600 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-980 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <980000>;
+	};
+
+	button-1180 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1180000>;
+	};
+
+	button-1400 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+
+	/* MLC Support sucks for now */
+	status = "disabled";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&rtp {
+	allwinner,ts-attached;
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&tve0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The GR8-EVB has a somewhat interesting design. There's a
+	 * pin supposed to control VBUS, an ID pin, a VBUS detect pin,
+	 * so everything should work just fine.
+	 *
+	 * Except that the pin supposed to control VBUS is not
+	 * connected to any controllable output, neither to the SoC
+	 * through a GPIO or to the PMIC, and it is pulled down,
+	 * meaning that we will never be able to enable VBUS on this
+	 * board.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi b/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi
new file mode 100644
index 0000000000000..98a8fd5e89e85
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2016 Mylène Josserand
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/clock/sun5i-ccu.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/reset/sun5i-ccu.h>
+
+/ {
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc {
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun5i-a10s-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&ccu CLK_HOSC>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <16>;
+			clocks = <&ccu CLK_APB0_I2S>, <&ccu CLK_I2S>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+	};
+};
+
+&ccu {
+	compatible = "nextthing,gr8-ccu";
+};
+
+&pio {
+	compatible = "nextthing,gr8-pinctrl";
+
+	i2s0_data_pins: i2s0-data-pins {
+		pins = "PB6", "PB7", "PB8", "PB9";
+		function = "i2s0";
+	};
+
+	i2s0_mclk_pin: i2s0-mclk-pin {
+		pins = "PB5";
+		function = "i2s0";
+	};
+
+	pwm1_pins: pwm1-pin {
+		pins = "PG13";
+		function = "pwm1";
+	};
+
+	spdif_tx_pin: spdif-tx-pin {
+		pins = "PB10";
+		function = "spdif";
+		bias-pull-up;
+	};
+
+	uart1_cts_rts_pins: uart1-cts-rts-pins {
+		pins = "PG5", "PG6";
+		function = "uart1";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts
new file mode 100644
index 0000000000000..4192c23848c31
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts
@@ -0,0 +1,282 @@
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-r8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing C.H.I.P.";
+	compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart3;
+		spi0 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "chip:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc0_pwrseq: mmc0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		 * The interrupt is routed through the "External Fast
+		 * Interrupt Request" pin (ball G13 of the module)
+		 * directly to the main interrupt controller, without
+		 * any other controller interfering.
+		 */
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "okay";
+
+	xio: gpio@38 {
+		compatible = "nxp,pcf8574a";
+		reg = <0x38>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&mmc0_pins {
+	bias-pull-up;
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "cpuvdd";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "corevdd";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "rtcvdd";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the WiFi/BT
+ * Chip.
+ *
+ * If those are not enabled, the SDIO part will not enumerate, and
+ * since there's no way currently to pass DT infos to an SDIO device,
+ * we cannot really do better than this ugly hack for now.
+ */
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-1";
+	regulator-always-on;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+	regulator-always-on;
+};
+
+&reg_ldo5 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_usb0_vbus {
+	vin-supply = <&reg_vcc5v0>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pe_pins>;
+	status = "disabled";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&tve0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>,
+		    <&uart3_cts_rts_pg_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&axp_gpio 3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi b/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi
new file mode 100644
index 0000000000000..de35dbcd11916
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i-a13.dtsi"
+
diff --git a/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi
new file mode 100644
index 0000000000000..6847f66699ac8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */
+		power-supply = <&reg_vcc3v0>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	/*
+	 * The gsl1680 is rated at 400KHz and it will not work reliable at
+	 * 100KHz, this has been confirmed on multiple different q8 tablets.
+	 * All other devices on this bus are also rated for 400KHz.
+	 */
+	clock-frequency = <400000>;
+
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
+		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+		/* Tablet dts must provide reg and compatible */
+		status = "disabled";
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i.dtsi b/arch/arm/boot/dts/allwinner/sun5i.dtsi
new file mode 100644
index 0000000000000..d7c7b454a11a3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i.dtsi
@@ -0,0 +1,819 @@
+/*
+ * Copyright 2012-2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun5i-ccu.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/reset/sun5i-ccu.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&ccu CLK_CPU>;
+		};
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>;
+			status = "disabled";
+		};
+
+		framebuffer-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>,
+				 <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-ranges;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun5i-a13-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun5i-a13-sram-a3-a4",
+						     "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun5i-a13-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun5i-a13-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		mbus: dram-controller@1c01000 {
+			compatible = "allwinner,sun5i-a13-mbus";
+			reg = <0x01c01000 0x1000>;
+			clocks = <&ccu CLK_MBUS>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0x20000000>;
+			#interconnect-cells = <1>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tve0: tv-encoder@1c0a000 {
+			compatible = "allwinner,sun4i-a10-tv-encoder";
+			reg = <0x01c0a000 0x1000>;
+			clocks = <&ccu CLK_AHB_TVE>;
+			resets = <&ccu RST_TVE>;
+			status = "disabled";
+
+			port {
+
+				tve0_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_tve0>;
+				};
+			};
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun5i-a13-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+			resets = <&ccu RST_LCD>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD>,
+				 <&ccu CLK_TCON_CH0>,
+				 <&ccu CLK_TCON_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_tve0: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tve0_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun5i-a13-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <53>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			interrupts = <32>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset", "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ccu CLK_AHB_EHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun5i-a13-crypto",
+				     "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <54>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			emac_pd_pins: emac-pd-pins {
+				pins = "PD6", "PD7", "PD10",
+				       "PD11", "PD12", "PD13", "PD14",
+				       "PD15", "PD18", "PD19", "PD20",
+				       "PD21", "PD22", "PD23", "PD24",
+				       "PD25", "PD26", "PD27";
+				function = "emac";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB15", "PB16";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB17", "PB18";
+				function = "i2c2";
+			};
+
+			ir0_rx_pin: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			lcd_rgb565_pins: lcd-rgb565-pins {
+				pins = "PD3", "PD4", "PD5", "PD6", "PD7",
+						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+						 "PD19", "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			lcd_rgb666_pins: lcd-rgb666-pins {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_4bit_pc_pins: mmc2-4bit-pc-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc2_4bit_pe_pins: mmc2-4bit-pe-pins {
+				pins = "PE4", "PE5", "PE6", "PE7",
+				       "PE8", "PE9";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13",
+				       "PC14", "PC15";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			nand_pins: nand-pins {
+				pins = "PC0", "PC1", "PC2",
+				       "PC5", "PC8", "PC9", "PC10",
+				       "PC11", "PC12", "PC13", "PC14",
+				       "PC15";
+				function = "nand0";
+			};
+
+			nand_cs0_pin: nand-cs0-pin {
+				pins = "PC4";
+				function = "nand0";
+			};
+
+			nand_rb0_pin: nand-rb0-pin {
+				pins = "PC6";
+				function = "nand0";
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			spi2_pe_pins: spi2-pe-pins {
+				pins = "PE1", "PE2", "PE3";
+				function = "spi2";
+			};
+
+			spi2_cs0_pe_pin: spi2-cs0-pe-pin {
+				pins = "PE0";
+				function = "spi2";
+			};
+
+			uart1_pe_pins: uart1-pe-pins {
+				pins = "PE10", "PE11";
+				function = "uart1";
+			};
+
+			uart1_pg_pins: uart1-pg-pins {
+				pins = "PG3", "PG4";
+				function = "uart1";
+			};
+
+			uart2_pd_pins: uart2-pd-pins {
+				pins = "PD2", "PD3";
+				function = "uart2";
+			};
+
+			uart2_cts_rts_pd_pins: uart2-cts-rts-pd-pins {
+				pins = "PD4", "PD5";
+				function = "uart2";
+			};
+
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG9", "PG10";
+				function = "uart3";
+			};
+
+			uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
+				pins = "PG11", "PG12";
+				function = "uart3";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>,
+				     <23>,
+				     <24>,
+				     <25>,
+				     <67>,
+				     <68>;
+			clocks = <&ccu CLK_HOSC>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <24>;
+			clocks = <&osc24M>;
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <69>, <70>, <71>, <72>,  <73>;
+			interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <320000000>;
+		};
+
+		timer@1c60000 {
+			compatible = "allwinner,sun5i-a13-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <82>, <83>;
+			clocks = <&ccu CLK_AHB_HSTIMER>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun5i-a13-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE>;
+			interconnects = <&mbus 19>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					reg = <1>;
+
+					fe0_out_be0: endpoint {
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun5i-a13-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE>;
+			interconnects = <&mbus 18>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					reg = <0>;
+
+					be0_in_fe0: endpoint {
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts
new file mode 100644
index 0000000000000..32d22025ac997
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2014 Boris Brezillon
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
+	compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts
new file mode 100644
index 0000000000000..93a15eaaa8cbd
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts
@@ -0,0 +1,130 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "WITS A31 Colombus Evaluation Board";
+	compatible = "wits,colombus", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c_lcd: i2c {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 0 23 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA23 */
+		scl-gpios = <&pio 0 24 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA24 */
+		i2c-gpio,delay-us = <5>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "fail";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	mma8452: mma8452@1d {
+		compatible = "fsl,mma8452";
+		reg = <0x1d>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
new file mode 100644
index 0000000000000..236ebfc061924
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
@@ -0,0 +1,338 @@
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Merrii A31 Hummingbird";
+	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
+
+	aliases {
+		rtc0 = &pcf8563;
+		rtc1 = &rtc;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vga-connector {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_dac_out>;
+			};
+		};
+	};
+
+	vga-dac {
+		compatible = "dumb-vga-dac";
+		vdd-supply = <&reg_vga_3v3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_dac_in: endpoint {
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_dac_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	reg_vga_3v3: vga_3v3_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vga-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Speaker", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Headset Mic",
+		"Mic",	"MBIAS",
+		"Headset Mic", "HBIAS";
+	allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	/* pull-ups and devices require AXP221 DLDO3 */
+	status = "failed";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_dac_in>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts
new file mode 100644
index 0000000000000..744723d956f0d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2015 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele I7 Quad top set box";
+	compatible = "mele,i7", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "i7:blue:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts
new file mode 100644
index 0000000000000..7d2eaaf5c33e3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts
@@ -0,0 +1,212 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele M9 top set box";
+	compatible = "mele,m9", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "m9:blue:pwr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ethernet-phy";
+};
+
+/*
+ * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
+ * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
+ * marked as regulator-always-on.
+ */
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-hub";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_aldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts
new file mode 100644
index 0000000000000..83611434270cb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts
@@ -0,0 +1,217 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele A1000G Quad top set box";
+	compatible = "mele,a1000g-quad", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "a1000g:blue:pwr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ethernet-phy";
+};
+
+/*
+ * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
+ * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
+ * marked as regulator-always-on.
+ */
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-hub";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_aldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi
new file mode 100644
index 0000000000000..5cce4918f84c9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi
@@ -0,0 +1,1422 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/reset/sun6i-a31-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		simplefb_hdmi: framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_AHB1_HDMI>, <&ccu CLK_DRAM_BE0>,
+				 <&ccu CLK_IEP_DRC0>, <&ccu CLK_BE0>,
+				 <&ccu CLK_LCD0_CH1>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		simplefb_lcd: framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_DRAM_BE0>, <&ccu CLK_IEP_DRC0>,
+				 <&ccu CLK_BE0>, <&ccu CLK_LCD0_CH0>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus {
+		enable-method = "allwinner,sun6i-a31";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext_osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk-mii-phy-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk-gmac-int-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@1c200d0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c200d0 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun6i-a31-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun6i-a31-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DMA>;
+			resets = <&ccu RST_AHB1_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun6i-a31-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 11>;
+			resets = <&ccu RST_AHB1_LCD0>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
+			clocks = <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_LCD0_CH0>,
+				 <&ccu CLK_LCD0_CH1>,
+				 <&ccu 15>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1",
+				      "lvds-alt";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+
+					tcon0_in_drc1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&drc1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun6i-a31-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 12>;
+			resets = <&ccu RST_AHB1_LCD1>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd", "lvds";
+			clocks = <&ccu CLK_AHB1_LCD1>,
+				 <&ccu CLK_LCD1_CH0>,
+				 <&ccu CLK_LCD1_CH1>,
+				 <&ccu 15>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1",
+				      "lvds-alt";
+			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon1>;
+					};
+
+					tcon1_in_drc1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&drc1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC3>,
+				 <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun6i-a31-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
+			resets = <&ccu RST_AHB1_HDMI>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			dmas = <&dma 13>, <&dma 13>, <&dma 14>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun6i-a31-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_AHB1_OTG>;
+			resets = <&ccu RST_AHB1_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun6i-a31-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_EHCI0>;
+			resets = <&ccu RST_AHB1_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_AHB1_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_EHCI1>;
+			resets = <&ccu RST_AHB1_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1b400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_AHB1_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_OHCI2>, <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_AHB1_OHCI2>;
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun6i-a31-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun6i-a31-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			gmac_gmii_pins: gmac-gmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+						"PA4", "PA5", "PA6", "PA7",
+						"PA8", "PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14",	"PA15",
+						"PA16", "PA17", "PA18", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA25", "PA26", "PA27";
+				function = "gmac";
+				/*
+				 * data lines in GMII mode run at 125MHz and
+				 * might need a higher signal drive strength
+				 */
+				drive-strength = <30>;
+			};
+
+			gmac_mii_pins: gmac-mii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+						"PA8", "PA9", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA26", "PA27";
+				function = "gmac";
+			};
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+						"PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA25", "PA26", "PA27";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH14", "PH15";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH16", "PH17";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PH18", "PH19";
+				function = "i2c2";
+			};
+
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
+				pins = "PD0", "PD1", "PD2", "PD3",
+						 "PD4", "PD5", "PD6", "PD7",
+						 "PD8", "PD9", "PD10", "PD11",
+						 "PD12", "PD13", "PD14", "PD15",
+						 "PD16", "PD17", "PD18", "PD19",
+						 "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+						 "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_4bit_pins: mmc2-4bit-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15",
+						 "PC24";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc3_8bit_emmc_pins: mmc3-8bit-emmc-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15",
+						 "PC24";
+				function = "mmc3";
+				drive-strength = <40>;
+				bias-pull-up;
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH28";
+				function = "spdif";
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH20", "PH21";
+				function = "uart0";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt1: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_APB1_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>, <&dma 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>;
+			resets = <&ccu RST_APB1_DAUDIO0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>;
+			resets = <&ccu RST_APB1_DAUDIO1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun6i-a31-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART0>;
+			resets = <&ccu RST_APB2_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART1>;
+			resets = <&ccu RST_APB2_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART2>;
+			resets = <&ccu RST_APB2_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART3>;
+			resets = <&ccu RST_APB2_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART4>;
+			resets = <&ccu RST_APB2_UART4>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART5>;
+			resets = <&ccu RST_APB2_UART5>;
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C0>;
+			resets = <&ccu RST_APB2_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C1>;
+			resets = <&ccu RST_APB2_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C2>;
+			resets = <&ccu RST_APB2_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C3>;
+			resets = <&ccu RST_APB2_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gmac: ethernet@1c30000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c30000 0x1054>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_AHB1_EMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			resets = <&ccu RST_AHB1_EMAC>;
+			reset-names = "stmmaceth";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun6i-a31-crypto",
+				     "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_AHB1_SS>;
+			reset-names = "ahb";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_APB1_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		timer@1c60000 {
+			compatible = "allwinner,sun6i-a31-hstimer",
+				     "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_HSTIMER>;
+			resets = <&ccu RST_AHB1_HSTIMER>;
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c69000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi2: spi@1c6a000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6a000 0x1000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 25>, <&dma 25>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi3: spi@1c6b000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6b000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 26>, <&dma 26>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun6i-a31-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_FE0>, <&ccu CLK_FE0>,
+				 <&ccu CLK_DRAM_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun6i-a31-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_FE1>, <&ccu CLK_FE1>,
+				 <&ccu CLK_DRAM_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun6i-a31-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_BE1>, <&ccu CLK_BE1>,
+				 <&ccu CLK_DRAM_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_drc1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&drc1_in_be1>;
+					};
+				};
+			};
+		};
+
+		drc1: drc@1e50000 {
+			compatible = "allwinner,sun6i-a31-drc";
+			reg = <0x01e50000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DRC1>, <&ccu CLK_IEP_DRC1>,
+				 <&ccu CLK_DRAM_DRC1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_DRC1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_drc1>;
+					};
+				};
+
+				drc1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc1>;
+					};
+
+					drc1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_drc1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun6i-a31-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_BE0>,
+				 <&ccu CLK_DRAM_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_drc0: endpoint {
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@1e70000 {
+			compatible = "allwinner,sun6i-a31-drc";
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
+				 <&ccu CLK_DRAM_DRC0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_DRC0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					reg = <0>;
+
+					drc0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+
+					drc0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_drc0>;
+					};
+				};
+			};
+		};
+
+		rtc: rtc@1f00000 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc32k>;
+			clock-output-names = "osc32k";
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@1f01400 {
+			compatible = "allwinner,sun6i-a31-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "allwinner,sun6i-a31-ar100-clk";
+				#clock-cells = <0>;
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>,
+					 <&ccu CLK_PLL_PERIPH>,
+					 <&ccu CLK_PLL_PERIPH>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun6i-a31-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_ir",
+						"apb0_timer", "apb0_p2wi",
+						"apb0_uart", "apb0_1wire",
+						"apb0_i2c";
+			};
+
+			ir_clk: ir_clk {
+				#clock-cells = <0>;
+				compatible = "allwinner,sun4i-a10-mod0-clk";
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>;
+				clock-output-names = "ir";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		cpucfg@1f01c00 {
+			compatible = "allwinner,sun6i-a31-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
+		ir: ir@1f02000 {
+			compatible = "allwinner,sun6i-a31-ir";
+			clocks = <&apb0_gates 1>, <&ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apb0_rst 1>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x40>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun6i-a31-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			s_ir_rx_pin: s-ir-rx-pin {
+				pins = "PL4";
+				function = "s_ir";
+			};
+
+			s_p2wi_pins: s-p2wi-pins {
+				pins = "PL0", "PL1";
+				function = "s_p2wi";
+			};
+		};
+
+		p2wi: i2c@1f03400 {
+			compatible = "allwinner,sun6i-a31-p2wi";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <100000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&s_p2wi_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts
new file mode 100644
index 0000000000000..a2ef7846e2c8a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sun6i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Colorfly E708 Q1 tablet";
+	compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pg";
+};
+
+&simplefb_lcd {
+	vcc-pg-supply = <&reg_dldo2>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts
new file mode 100644
index 0000000000000..1d15e15011c68
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+
+/ {
+	model = "CSQ CS908 top set box";
+	compatible = "csq,cs908", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts
new file mode 100644
index 0000000000000..c5e2c55cdc633
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sun6i-reference-design-tablet.dtsi"
+
+/ {
+	model = "iNet Q972 tablet";
+	compatible = "inet-tek,inet-q972", "allwinner,sun6i-a31s";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-size-x = <768>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-900 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <900000>;
+	};
+
+	button-1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
new file mode 100644
index 0000000000000..b32b70ada7fd0
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
@@ -0,0 +1,267 @@
+/*
+ * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ * Copyright 2015 Karsten Merker <merker@debian.org>
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "MSI Primo81 tablet";
+	compatible = "msi,primo81", "allwinner,sun6i-a31s";
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* rtl8188etv wifi is connected here */
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	/* pull-ups and device VDDIO use AXP221 DLDO3 */
+	status = "failed";
+};
+
+&i2c1 {
+	status = "okay";
+
+	ctp@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-swapped-x-y;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	accelerometer@1c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mma8452_int_primo81>;
+		compatible = "fsl,mma8452";
+		reg = <0x1c>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button-349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&pio {
+	mma8452_int_primo81: mma8452-int-pin {
+		pins = "PA9";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-mipi-bridge";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+	vdd-mipi-bridge-supply = <&reg_eldo3>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi
new file mode 100644
index 0000000000000..227ad489731c3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sinlinx SinA31s Core Board";
+	compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+/* eMMC on core board */
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+/* AXP221s PMIC on core board */
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/* UART0 pads available on core board */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts
new file mode 100644
index 0000000000000..56956352914d7
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts
@@ -0,0 +1,195 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The SinA31s development board has the SinA31s core board soldered on */
+#include "sun6i-a31s-sina31s-core.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sinlinx SinA31s Development Board";
+	compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "sina31s:status:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",	"MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* USB 2.0 4 port hub IC */
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button-349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
new file mode 100644
index 0000000000000..96554ab4f6d33
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -0,0 +1,334 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sinovoip BPI-M2";
+	compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bpi-m2:blue:usr";
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		};
+
+		led-1 {
+			label = "bpi-m2:green:usr";
+			gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+		};
+
+		led-2 {
+			label = "bpi-m2:red:usr";
+			gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
+		};
+	};
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-gmac";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vdd-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-mac";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pb";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pm-cpus";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&pio {
+	gpio-line-names =
+		/* PA */
+		"ETXD0", "ETXD1", "ETXD2", "ETXD3", "SDC0-DET", "", "",
+		"", "ETXCLK", "ETXEN", "EGTXCLK", "ERXD0", "ERXD1",
+		"ERXD2", "ERXD3", "", "", "", "", "ERXDV", "ERXCK",
+		"ETXERR", "ERXERR", "ECOL", "ECRS", "ECLKIN", "EMDC",
+		"EMDIO", "", "", "", "",
+
+		/* PB */
+		"CN7-P29", "CN7-P31", "CN7-P33", "CN7-P35", "CN7-P37",
+		"CN7-P28", "CN7-P27", "CN7-P32", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "",
+
+		/* PC */
+		"", "", "", "", "", "", "WL-SDIO-CMD", "WL-SDIO-CLK",
+		"WL-SDIO-D0", "WL-SDIO-D2", "WL-SDIO-D2", "WL-SDIO-D3",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "USB-DRV", "", "", "", "",
+
+		/* PD */
+		"CN9-P09", "CN9-P11", "CN9-P13", "CN9-P15", "CN9-P17",
+		"CN9-P19", "CN9-P21", "CN9-P23", "CN9-P25", "CN9-P27",
+		"CN9-P29", "CN9-P31", "CN9-P33", "CN9-P35", "CN9-P37",
+		"CN9-P39", "CN9-P40", "CN9-P38", "CN9-P36", "CN9-P34",
+		"CN9-P32", "CN9-P30", "CN9-P28", "CN9-P26", "CN9-P22",
+		"CN9-P14", "CN9-P18", "CN9-P16", "", "", "", "",
+
+		/* PE */
+		"CN6-P20", "CN6-P24", "CN6-P30", "CN6-P28", "CN7-P08",
+		"CN7-P10", "CN7-P36", "CN7-P38", "CN6-P17", "CN6-P19",
+		"CN6-P21", "CN6-P23", "CN6-P25", "CN6-P27", "CN6-P29",
+		"CN6-P31", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "",
+
+		/* PF */
+		"SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+		"SDC0-D2", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"",
+
+		/* PG */
+		"CN9-P06", "CN9-P08", "CN9-P20", "CN9-P12", "CN9-P07",
+		"LED-PWR", "CN7-P13", "CN7-P11", "CN7-P22", "CN7-P15",
+		"LED-G", "LED-B", "CN7-P26", "CN7-P24", "CN7-P23",
+		"CN7-P19", "CN7-P21", "HCEC", "CN6-P22", "", "", "", "",
+		"", "", "", "", "", "", "", "", "",
+
+		/* PH */
+		"", "", "", "", "", "", "", "", "", "CN7-P07",
+		"CN7-P12", "CN7-P16", "CN7-P18", "CN9-P10", "CN6-P16",
+		"CN6-P14", "CN9-P04", "CN9-P02", "CN7-P05", "CN7-P03",
+		"CN8-P03", "CN8-P02", "", "", "CN6-P34", "CN6-P32",
+		"CN6-P26", "CN6-P18", "", "", "", "";
+};
+
+&r_pio {
+	gpio-line-names =
+		/* PL */
+		"PMU-SCK", "PMU-SDA", "VBAT-EN", "", "IR-RX",
+		"WL-WAKE-HOST", "BT-WAKE_HOST", "BT-ENABLE",
+		"WL-PMU-EN", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "",
+
+		/* PM */
+		"CN6-P12", "CN6-P35", "CN7-P40", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts
new file mode 100644
index 0000000000000..0b61f5368d449
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2015 Lawrence Yu <lyu@micile.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Yones TopTech BS1078 v2 Tablet";
+	compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd-usb2";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+/* Voltage source for I2C pullup resistors for I2C Bus 0 */
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+	usb2_vbus-supply = <&reg_dc1sw>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi
new file mode 100644
index 0000000000000..97e2c51d0aea4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The A31s is the same die as the A31 in a different package, this is
+ * reflected by it having different pinctrl compatible everything else is
+ * identical.
+ */
+
+#include "sun6i-a31.dtsi"
+
+&de {
+	compatible = "allwinner,sun6i-a31s-display-engine";
+};
+
+&pio {
+	compatible = "allwinner,sun6i-a31s-pinctrl";
+};
+
+&tcon0 {
+	compatible = "allwinner,sun6i-a31s-tcon";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi
new file mode 100644
index 0000000000000..f38d19c6be8cb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	/* Wifi is connected here */
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 0 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA15 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts
new file mode 100644
index 0000000000000..caa935ca4f190
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts
@@ -0,0 +1,264 @@
+/*
+ * Copyright 2016 Luo Yi <luoyi.ly@gmail.com>
+ *
+ * Thanks to the original work by Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Banana Pi BPI-M1-Plus";
+	compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bananapi-m1-plus:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "bananapi-m1-plus:pwr:usr";
+			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&mmc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* VBUS on usb host ports are tied to DC5V and therefore always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
new file mode 100644
index 0000000000000..46ecf9db2324c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
@@ -0,0 +1,333 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "LeMaker Banana Pi";
+	compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "bananapi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+	operating-points =
+		/* kHz	  uV */
+		<960000	1400000>,
+		<912000	1400000>,
+		<864000	1350000>,
+		<720000	1250000>,
+		<528000	1150000>,
+		<312000	1100000>,
+		<144000	1050000>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+	gpio-line-names =
+		/* PA */
+		"ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
+			"ETXD2", "ETXD1", "ETXD0",
+		"ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO",
+			"ETXEN", "ETXCK", "ECRS",
+		"ECOL", "ETXERR", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PB */
+		"PMU-SCK", "PMU-SDA", "", "", "", "", "", "",
+		"", "USB0-DRV", "", "", "", "", "", "",
+		"", "", "", "", "SCL", "SDA", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PC */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PD */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PE */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PF */
+		"SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3",
+			"SD0-D2", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PG */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PH */
+		"TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "",
+		"", "", "SD0-DET", "", "", "", "", "",
+		"", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN",
+		"LED1", "", "", "", "", "", "", "",
+		/* PI */
+		"", "", "", "IO-GCLK", "", "", "", "",
+		"", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI",
+			"SPI-MISO", "SPI-CE1", "",
+		"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts
new file mode 100644
index 0000000000000..e22f0e8bb17a7
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts
@@ -0,0 +1,219 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LeMaker Banana Pro";
+	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bananapro:blue:usr";
+			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "bananapro:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts
new file mode 100644
index 0000000000000..e35e6990c4b2d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts
@@ -0,0 +1,237 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Cubietech Cubieboard2";
+	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "cubieboard2:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "cubieboard2:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts
new file mode 100644
index 0000000000000..52160e3683049
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts
@@ -0,0 +1,345 @@
+/*
+ * Copyright 2013 Oliver Schinagl
+ *
+ * Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Cubietech Cubietruck";
+	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "cubietruck:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "cubietruck:orange:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "cubietruck:white:usr";
+			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "cubietruck:green:usr";
+			gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+		clocks = <&ccu CLK_OUT_A>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	/* Pin outputs low power clock for WiFi and BT */
+	pinctrl-0 = <&clk_out_a_pin>;
+	pinctrl-names = "default";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		clocks = <&ccu CLK_OUT_A>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+		host-wakeup-gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+		shutdown-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
+		max-speed = <1500000>;
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+	usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts
new file mode 100644
index 0000000000000..097e479c27721
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Conley Lee
+ * Conley Lee <conleylee@foxmail.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A20";
+	compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy-handle = <&phy0>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts
new file mode 100644
index 0000000000000..3def2a3305981
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2013 Wills Wang
+ *
+ * Wills Wang <wills.wang.open@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Merrii A20 Hummingbird";
+	compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_mmc3_vdd: mmc3_vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc3_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	};
+
+	reg_gmac_vdd: gmac_vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_vdd>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_mmc3_vdd>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pb_pins>,
+		    <&spi2_cs0_pb_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts
new file mode 100644
index 0000000000000..b21ddd0ec1c22
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts
@@ -0,0 +1,198 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "I12 / Q5 / QT840A A20 tvbox";
+	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "i12_tvbox:red:usr";
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label = "i12_tvbox:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vmmc3_io: vmmc3-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc3-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* This controls VCC-PI, must be always on! */
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		enable-active-high;
+		gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts
new file mode 100644
index 0000000000000..577ead1d02a0f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2023 In-Circuit GmbH
+
+/dts-v1/;
+
+#include "sun7i-a20-icnova-a20.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "In-Circuit ICnova A20 ADB4006";
+	compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
+		     "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi
new file mode 100644
index 0000000000000..46616c6bc8991
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2023 In-Circuit GmbH
+
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts
new file mode 100644
index 0000000000000..413505f45a81e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2015 Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "ICnova-A20 SWAC";
+	compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20",
+		     "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts
new file mode 100644
index 0000000000000..8ff83016ff5af
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-itead-core-common.dtsi"
+
+/ {
+	model = "Itead Ibox A20";
+	compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_itead_core>;
+
+		led-0 {
+			label = "itead_core:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "itead_core:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&pio {
+	led_pins_itead_core: led-pins {
+		pins = "PH20","PH21";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts
new file mode 100644
index 0000000000000..97518afe4658a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts
@@ -0,0 +1,320 @@
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Lamobo R1";
+	compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "lamobo_r1:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch: ethernet-switch@1e {
+			compatible = "brcm,bcm53125";
+			reg = <30>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+					label = "lan2";
+				};
+
+				port1: port@1 {
+					reg = <1>;
+					label = "lan3";
+				};
+
+				port2: port@2 {
+					reg = <2>;
+					label = "lan4";
+				};
+
+				port3: port@3 {
+					reg = <3>;
+					label = "wan";
+				};
+
+				port4: port@4 {
+					reg = <4>;
+					label = "lan1";
+				};
+
+				port8: port@8 {
+					reg = <8>;
+					label = "cpu";
+					ethernet = <&gmac>;
+					phy-mode = "rgmii-txid";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts
new file mode 100644
index 0000000000000..da5a2eea4ce3e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2020 Linutronix GmbH
+ * Author: Benedikt Spranger <b.spranger@linutronix.de>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-lamobo-r1.dts"
+
+/ {
+	model = "Lamobo R1";
+	compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	leds {
+		led-opto1 {
+			label = "lamobo_r1:opto:powerswitch";
+			gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-opto2 {
+			label = "lamobo_r1:opto:relay";
+			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		status = "okay";
+	};
+
+	atecc508a@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts
new file mode 100644
index 0000000000000..f161d52388604
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Mele M3";
+	compatible = "mele,m3", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "m3:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts
new file mode 100644
index 0000000000000..1491c603f6614
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts
@@ -0,0 +1,184 @@
+/*
+ * Copyright 2015 Marcus Cooper
+ *
+ * Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "mk808c";
+	compatible = "allwinner,mk808c", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+	remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
new file mode 100644
index 0000000000000..20bf09b2226cf
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-Olimex-SOM-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som-evb.dts"
+
+/ {
+
+	model = "Olimex A20-Olimex-SOM-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts
new file mode 100644
index 0000000000000..f05ee32bc9cb6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts
@@ -0,0 +1,329 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ * Copyright 2015 - Karsten Merker <merker@debian.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-Olimex-SOM-EVB";
+	compatible = "olimex,a20-olimex-som-evb", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "a20-olimex-som-evb:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button-600 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-980 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <980000>;
+	};
+
+	button-1180 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1180000>;
+	};
+
+	button-1400 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1400000>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olimex_som_evb: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6_pi_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
new file mode 100644
index 0000000000000..a59755a2e7a9d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-SOM204-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som204-evb.dts"
+
+/ {
+	model = "Olimex A20-SOM204-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts
new file mode 100644
index 0000000000000..54af6c18075b5
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-SOM204-EVB Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Olimex A20-SOM204-EVB";
+	compatible = "olimex,a20-olimex-som204-evb", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		ethernet1 = &rtl8723bs;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "a20-som204-evb:green:stat";
+			gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "a20-som204-evb:green:led1";
+			gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-2 {
+			label = "a20-som204-evb:yellow:led2";
+			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	rtl_pwrseq: rtl_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy3>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Exposed to UEXT1 */
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/* Exposed to UEXT2 */
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&rtl_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	uart3_rts_pin: uart3-rts-pin {
+		pins = "PG8";
+		function = "uart3";
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1300000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pg";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+/* Exposed to UEXT1 */
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+/* Exposed to UEXT2 */
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* Used for RTL8723BS bluetooth */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_pin>;
+	status = "okay";
+};
+
+/* Exposed to UEXT1 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+/* Exposed to UEXT2 */
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts
new file mode 100644
index 0000000000000..033cab3443f83
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+#include "sun7i-a20-olinuxino-lime.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME-eMMC";
+	compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts
new file mode 100644
index 0000000000000..92938d0222956
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts
@@ -0,0 +1,216 @@
+/*
+ * This is based on sun4i-a10-olinuxino-lime.dts
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME";
+	compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		led {
+			label = "a20-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxinolime: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts
new file mode 100644
index 0000000000000..decb014a382b8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts
@@ -0,0 +1,69 @@
+ /*
+ * Copyright 2015 - Ultimaker B.V.
+ * Author Olliver Schinagl <oliver@schinagl.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-olinuxino-lime2.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME2-eMMC";
+	compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts
new file mode 100644
index 0000000000000..ecb91fb899ff3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts
@@ -0,0 +1,280 @@
+/*
+ * Copyright 2014 - Iain Paton <ipaton0@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME2";
+	compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		led {
+			label = "a20-olinuxino-lime2:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_axp_ipsout: axp_ipsout {
+		compatible = "regulator-fixed";
+		regulator-name = "axp-ipsout";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_ldo3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_ldo4>;
+
+	led_pins_olinuxinolime: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1300000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi0";
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi1";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts
new file mode 100644
index 0000000000000..2337b44a88aa1
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts
@@ -0,0 +1,68 @@
+ /*
+ * Copyright 2017 Olimex Ltd.
+ * Stefan Mavrodiev <stefan@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-olinuxino-micro.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-MICRO-eMMC";
+	compatible = "olimex,a20-olinuxino-micro-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
new file mode 100644
index 0000000000000..a1b89b2a29994
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
@@ -0,0 +1,354 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-Olinuxino Micro";
+	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart6;
+		serial2 = &uart7;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		led {
+			label = "a20-olinuxino-micro:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button-392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button-601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button-795 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button-987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+
+	button-1184 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1184678>;
+	};
+
+	button-1398 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1398804>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+
+	led_pins_olinuxino: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6_pi_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts
new file mode 100644
index 0000000000000..84efa01e7cba0
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts
@@ -0,0 +1,242 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Orange Pi Mini";
+	compatible = "xunlong,orangepi-mini", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+
+		led-1 {
+			label = "orangepi:blue:usr";
+			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts
new file mode 100644
index 0000000000000..5d77f1d9818f9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts
@@ -0,0 +1,201 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Orange Pi";
+	compatible = "xunlong,orangepi", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts
new file mode 100644
index 0000000000000..e40ecb48d726e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2015-2020 Adam Sampson <ats@offog.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LinkSprite pcDuino3 Nano";
+	compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-3 {
+			label = "pcduino3-nano:green:usr1";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+		};
+
+		led-4 {
+			label = "pcduino3-nano:green:usr2";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+/* A single regulator (U24) powers both USB host ports. */
+&reg_usb1_vbus {
+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts
new file mode 100644
index 0000000000000..928b86a95f349
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts
@@ -0,0 +1,227 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "LinkSprite pcDuino3";
+	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "pcduino3:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label = "pcduino3:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-back {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+
+		key-home {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+
+		key-menu {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts
new file mode 100644
index 0000000000000..fef02fcbbdf82
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Wexler TAB7200";
+	compatible = "wexler,tab7200", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	gt911: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
+		reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-571 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <571428>;
+	};
+
+	button-761 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <761904>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
new file mode 100644
index 0000000000000..3bfae98f3cc3a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Wits Pro A20 DKT";
+	compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi
new file mode 100644
index 0000000000000..5574299685ab5
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi
@@ -0,0 +1,1710 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/clock/sun7i-a20-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>,
+				 <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>,
+				 <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk-mii-phy-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk-gmac-int-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@1c20164 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c20164 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+	};
+
+
+	de: display-engine {
+		compatible = "allwinner,sun7i-a20-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun7i-a20-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun7i-a20-sram-a3-a4",
+						     "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun7i-a20-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun7i-a20-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		nmi_intc: interrupt-controller@1c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <4>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
+			resets = <&ccu RST_CSI0>;
+			status = "disabled";
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun7i-a20-tcon0",
+				     "allwinner,sun7i-a20-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
+			reset-names = "lcd", "lvds";
+			clocks = <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_TCON0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+
+					tcon0_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun7i-a20-tcon1",
+				     "allwinner,sun7i-a20-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_TCON1>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD1>,
+				 <&ccu CLK_TCON1_CH0>,
+				 <&ccu CLK_TCON1_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon1>;
+					};
+
+					tcon1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun7i-a20-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC3>,
+				 <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc3_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun7i-a20-usb-phy";
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&ccu CLK_USB_PHY>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun7i-a20-crypto",
+				     "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun7i-a20-hdmi",
+				     "allwinner,sun5i-a10s-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1c000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1c400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun7i-a20-csi1",
+				     "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun7i-a20-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun7i-a20-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			/omit-if-no-ref/
+			can_pa_pins: can-pa-pins {
+				pins = "PA16", "PA17";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
+			can_ph_pins: can-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
+			clk_out_a_pin: clk-out-a-pin {
+				pins = "PI12";
+				function = "clk_out_a";
+			};
+
+			/omit-if-no-ref/
+			clk_out_b_pin: clk-out-b-pin {
+				pins = "PI13";
+				function = "clk_out_b";
+			};
+
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_clk_pin: csi-clk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			emac_pa_pins: emac-pa-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "emac";
+			};
+
+			/omit-if-no-ref/
+			emac_ph_pins: emac-ph-pins {
+				pins = "PH8", "PH9", "PH10", "PH11",
+				       "PH14", "PH15", "PH16", "PH17",
+				       "PH18", "PH19", "PH20", "PH21",
+				       "PH22", "PH23", "PH24", "PH25",
+				       "PH26";
+				function = "emac";
+			};
+
+			/omit-if-no-ref/
+			gmac_mii_pins: gmac-mii-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "gmac";
+			};
+
+			/omit-if-no-ref/
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				        "PA7", "PA8", "PA10",
+				       "PA11", "PA12", "PA13",
+				       "PA15", "PA16";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			/omit-if-no-ref/
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			/omit-if-no-ref/
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			/omit-if-no-ref/
+			ir0_rx_pin: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			/omit-if-no-ref/
+			ir0_tx_pin: ir0-tx-pin {
+				pins = "PB3";
+				function = "ir0";
+			};
+
+			/omit-if-no-ref/
+			ir1_rx_pin: ir1-rx-pin {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			/omit-if-no-ref/
+			ir1_tx_pin: ir1-tx-pin {
+				pins = "PB22";
+				function = "ir1";
+			};
+
+			/omit-if-no-ref/
+			lcd_lvds0_pins: lcd-lvds0-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9";
+				function = "lvds0";
+			};
+
+			/omit-if-no-ref/
+			lcd_lvds1_pins: lcd-lvds1-pins {
+				pins = "PD10", "PD11", "PD12", "PD13", "PD14",
+				       "PD15", "PD16", "PD17", "PD18", "PD19";
+				function = "lvds1";
+			};
+
+			/omit-if-no-ref/
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc2_pins: mmc2-pins {
+				pins = "PC6", "PC7", "PC8",
+				       "PC9", "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc3_pins: mmc3-pins {
+				pins = "PI4", "PI5", "PI6",
+				       "PI7", "PI8", "PI9";
+				function = "mmc3";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			ps2_0_pins: ps2-0-pins {
+				pins = "PI20", "PI21";
+				function = "ps2";
+			};
+
+			/omit-if-no-ref/
+			ps2_1_ph_pins: ps2-1-ph-pins {
+				pins = "PH12", "PH13";
+				function = "ps2";
+			};
+
+			/omit-if-no-ref/
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			/omit-if-no-ref/
+			pwm1_pin: pwm1-pin {
+				pins = "PI3";
+				function = "pwm";
+			};
+
+			/omit-if-no-ref/
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PB13";
+				function = "spdif";
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pi_pins: spi0-pi-pins {
+				pins = "PI11", "PI12", "PI13";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pi_pin: spi0-cs0-pi-pin {
+				pins = "PI10";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs1_pi_pin: spi0-cs1-pi-pin {
+				pins = "PI14";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pi_pins: spi1-pi-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi2_pb_pins: spi2-pb-pins {
+				pins = "PB15", "PB16", "PB17";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+				pins = "PB14";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			spi2_pc_pins: spi2-pc-pins {
+				pins = "PC20", "PC21", "PC22";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			spi2_cs0_pc_pin: spi2-cs0-pc-pin {
+				pins = "PC19";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA10", "PA11";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins {
+				pins = "PA12", "PA13";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart2_pa_pins: uart2-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins {
+				pins = "PA0", "PA1";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_pi_pins: uart2-pi-pins {
+				pins = "PI18", "PI19";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins {
+				pins = "PI16", "PI17";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_ph_pins: uart3-ph-pins {
+				pins = "PH0", "PH1";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins {
+				pins = "PH2", "PH3";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart4_pg_pins: uart4-pg-pins {
+				pins = "PG10", "PG11";
+				function = "uart4";
+			};
+
+			/omit-if-no-ref/
+			uart4_ph_pins: uart4-ph-pins {
+				pins = "PH4", "PH5";
+				function = "uart4";
+			};
+
+			/omit-if-no-ref/
+			uart5_ph_pins: uart5-ph-pins {
+				pins = "PH6", "PH7";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
+			uart5_pi_pins: uart5-pi-pins {
+				pins = "PI10", "PI11";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
+			uart6_pa_pins: uart6-pa-pins {
+				pins = "PA12", "PA13";
+				function = "uart6";
+			};
+
+			/omit-if-no-ref/
+			uart6_pi_pins: uart6-pi-pins {
+				pins = "PI12", "PI13";
+				function = "uart6";
+			};
+
+			/omit-if-no-ref/
+			uart7_pa_pins: uart7-pa-pins {
+				pins = "PA14", "PA15";
+				function = "uart7";
+			};
+
+			/omit-if-no-ref/
+			uart7_pi_pins: uart7-pi-pins {
+				pins = "PI20", "PI21";
+				function = "uart7";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		rtc: rtc@1c20d00 {
+			compatible = "allwinner,sun7i-a20-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 4>,
+			       <&dma SUN4I_DMA_NORMAL 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun7i-a20-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun7i-a20-sid";
+			reg = <0x01c23800 0x200>;
+		};
+
+		i2s2: i2s@1c24400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c24400 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 6>,
+			       <&dma SUN4I_DMA_NORMAL 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART7>;
+			status = "disabled";
+		};
+
+		ps20: ps2@1c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PS20>;
+			status = "disabled";
+		};
+
+		ps21: ps2@1c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PS21>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun7i-a20-can",
+				     "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_CAN>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@1c2c000 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2c000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun7i-a20-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		gmac: ethernet@1c50000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c50000 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+
+			gmac_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		hstimer@1c60000 {
+			compatible = "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_HSTIMER>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun7i-a20-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_DRAM_DE_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun7i-a20-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+				 <&ccu CLK_DRAM_DE_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun7i-a20-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+				 <&ccu CLK_DRAM_DE_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be1>;
+					};
+
+					be1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun7i-a20-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+
+					be0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi
new file mode 100644
index 0000000000000..cd4bf60dbb3cb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi
@@ -0,0 +1,855 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		simplefb_lcd: framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>,
+				 <&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>;
+			status = "disabled";
+		};
+	};
+
+	de: display-engine {
+		/* compatible gets set in SoC specific dtsi file */
+		allwinner,pipelines = <&fe0>;
+		status = "disabled";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus {
+		enable-method = "allwinner,sun8i-a23";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		ext_osc32k: ext_osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun8i-a23-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x80000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-a23-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-a23-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun8i-a23-nand-controller";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_NAND>;
+			reset-names = "ahb";
+			dmas = <&dma 5>;
+			dma-names = "rxtx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 12>;
+			clocks = <&ccu CLK_BUS_LCD>,
+				 <&ccu CLK_LCD_CH0>,
+				 <&ccu 13>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "lvds-alt";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_LCD>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint {
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c19000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			/*
+			 * compatible and address regions get set in
+			 * SoC specific dtsi file
+			 */
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI>;
+			resets = <&ccu RST_BUS_EHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
+			resets = <&ccu RST_BUS_OHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
+			/* interrupts get set in SoC specific dtsi file */
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH2", "PH3";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH4", "PH5";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PE12", "PE13";
+				function = "i2c2";
+			};
+
+			lcd_rgb666_pins: lcd-rgb666-pins {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pg_pins: mmc1-pg-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14",
+				       "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			nand_pins: nand-pins {
+				pins = "PC0", "PC1", "PC2", "PC5",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14", "PC15";
+				function = "nand0";
+			};
+
+			nand_cs0_pin: nand-cs0-pin {
+				pins = "PC4";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_cs1_pin: nand-cs1-pin {
+				pins = "PC3";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_rb0_pin: nand-rb0-pin {
+				pins = "PC6";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_rb1_pin: nand-rb1-pin {
+				pins = "PC7";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PH0";
+				function = "pwm0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pg_pins: uart1-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21400 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-a23-mali",
+				     "allwinner,sun7i-a20-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+			#cooling-cells = <2>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_FE>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					reg = <1>;
+
+					fe0_out_be0: endpoint {
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_BE>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					reg = <0>;
+
+					be0_in_fe0: endpoint {
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_drc0: endpoint {
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@1e70000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
+				 <&ccu CLK_DRAM_DRC>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_DRC>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					reg = <0>;
+
+					drc0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+
+		rtc: rtc@1f00000 {
+			compatible = "allwinner,sun8i-a23-rtc";
+			reg = <0x01f00000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out";
+			clocks = <&ext_osc32k>;
+			#clock-cells = <1>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@1f01400 {
+			compatible = "allwinner,sun8i-a23-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&osc24M>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun8i-a23-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_timer",
+						"apb0_rsb", "apb0_uart",
+						"apb0_i2c";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+
+			codec_analog: codec-analog {
+				compatible = "allwinner,sun8i-a23-codec-analog";
+			};
+		};
+
+		cpucfg@1f01c00 {
+			compatible = "allwinner,sun8i-a23-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
+		r_uart: serial@1f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb0_gates 4>;
+			resets = <&apb0_rst 4>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun8i-a23-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			clocks = <&apb0_gates 6>;
+			resets = <&apb0_rst 6>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-a23-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+				bias-pull-up;
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+
+			r_uart_pins_a: r-uart-pins {
+				pins = "PL2", "PL3";
+				function = "s_uart";
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts
new file mode 100644
index 0000000000000..53fb1be0401a7
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Allwinner A23 Evaluation Board";
+	compatible = "allwinner,sun8i-a23-evb", "allwinner,sun8i-a23";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button-600 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+/*
+ * The RX line has a non-populated resistance. In order to use it, you
+ * need to solder R207 on the back of the board in order to close the
+ * line and get a working UART.
+ */
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts
new file mode 100644
index 0000000000000..bcbc9b0758f99
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Allwinner GT90H Dual Core Tablet (v4)";
+	compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-gt90h.fw";
+	touchscreen-size-x = <1792>;
+	touchscreen-size-y = <1024>;
+	status = "okay";
+};
+
+&lradc {
+	button-600 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts
new file mode 100644
index 0000000000000..d4405752a4149
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-86DZ Rev 01";
+	compatible = "primux,inet86dz", "allwinner,sun8i-a23";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-inet86dz.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts
new file mode 120000
index 0000000000000..c2f22fc338110
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts
@@ -0,0 +1 @@
+sun8i-a23-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts
new file mode 120000
index 0000000000000..c2f22fc338110
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts
@@ -0,0 +1 @@
+sun8i-a23-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
new file mode 100644
index 0000000000000..d5f6aebd7216d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Polaroid MID2407PXE03 tablet";
+	compatible = "polaroid,mid2407pxe03", "allwinner,sun8i-a23";
+
+	aliases {
+		ethernet0 = &esp8089;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&i2c1 {
+	mma7660: accelerometer@4c {
+		reg = <0x4c>;
+		compatible = "fsl,mma7660";
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	esp8089: sdio_wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
+	};
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-polaroid-mid2407pxe03.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	touchscreen-inverted-x;
+	touchscreen-inverted-y;
+	vddio-supply = <&reg_ldo_io1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
new file mode 100644
index 0000000000000..9f9232a2fefbb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Polaroid MID2809PXE04 tablet";
+	compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23";
+
+	aliases {
+		ethernet0 = &esp8089;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	esp8089: sdio_wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
+	};
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3670";
+	firmware-name = "gsl3670-polaroid-mid2809pxe04.fw";
+	touchscreen-size-x = <1660>;
+	touchscreen-size-y = <890>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts
new file mode 100644
index 0000000000000..51097c77a152c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+	model = "Q8 A23 Tablet";
+	compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"Speaker", "HP",
+		"MIC1", "Mic",
+		"MIC2", "Headset Mic",
+		"Mic",  "MBIAS",
+		"Headset Mic", "HBIAS";
+	status = "okay";
+};
+
+&panel {
+	compatible = "bananapi,s070wv20-ct16";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint {
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi
new file mode 100644
index 0000000000000..a5e884a8b2ae3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-a23-a33.dtsi"
+
+/ {
+	soc {
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a23-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+	};
+};
+
+&be0 {
+	compatible = "allwinner,sun8i-a23-display-backend";
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-a23-ccu";
+};
+
+&de {
+	compatible = "allwinner,sun8i-a23-display-engine";
+};
+
+&drc0 {
+	compatible = "allwinner,sun8i-a23-drc";
+};
+
+&fe0 {
+	compatible = "allwinner,sun8i-a23-display-frontend";
+};
+
+&pio {
+	compatible = "allwinner,sun8i-a23-pinctrl";
+	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&tcon0 {
+	compatible = "allwinner,sun8i-a23-tcon";
+};
+
+&usb_otg {
+	compatible = "allwinner,sun6i-a31-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a23-usb-phy";
+	reg = <0x01c19400 0x10>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts
new file mode 120000
index 0000000000000..4519fd791a8f9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts
@@ -0,0 +1 @@
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts
new file mode 100644
index 0000000000000..2dfdd0a3151e8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Allwinner GA10H Quad Core Tablet (v1.1)";
+	compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33";
+
+	aliases {
+		/* Make u-boot set mac-address for rtl8703as (no eeprom) */
+		ethernet0 = &rtl8703as;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-ga10h.fw";
+	touchscreen-size-x = <1630>;
+	touchscreen-size-y = <990>;
+	touchscreen-inverted-y;
+	status = "okay";
+};
+
+&lradc {
+	button-600 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8703as: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts
new file mode 100644
index 0000000000000..065cb620aa992
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-D978 Rev 02";
+	compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		/* Delete debug UART as serial0 is the UART for bluetooth */
+		/delete-property/stdout-path;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_d978>;
+
+		led {
+			label = "d978:blue:home";
+			gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		};
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&r_pio {
+	led_pin_d978: led-pin {
+		pins = "PL5";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&r_uart {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>,
+		    <&uart1_cts_rts_pg_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts
new file mode 120000
index 0000000000000..4519fd791a8f9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts
@@ -0,0 +1 @@
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts
new file mode 100644
index 0000000000000..6fee8f1335082
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2016 - Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
+ *                  Olimex LTD. <support@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A33-OLinuXino";
+	compatible = "olimex,a33-olinuxino","allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "a33-olinuxino:green:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&sound {
+	/* Board level jack widgets */
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	/* Board level routing. First 2 routes copied from SoC level */
+	simple-audio-card,routing =
+		"Left DAC", "DACL",
+		"Right DAC", "DACR",
+		"HP", "HPCOM",
+		"Headphone Jack", "HP",
+		"MIC1", "Microphone Jack",
+		"Microphone Jack", "MBIAS";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts
new file mode 100644
index 0000000000000..9c5750c25613f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+	model = "Q8 A33 Tablet";
+	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts
new file mode 100644
index 0000000000000..0c82ff3c7cb48
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts
@@ -0,0 +1,275 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sinlinx SinA33";
+	compatible = "sinlinx,sina33", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	panel {
+		compatible = "netron-dy,e231732";
+		power-supply = <&reg_vcc3v3>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_panel>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&cpu0_opp_table {
+	opp-1104000000 {
+		opp-hz = /bits/ 64 <1104000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+
+	opp-1200000000 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_dcdc1>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191011>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <391304>;
+	};
+
+	button-600 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi
new file mode 100644
index 0000000000000..30fdd2703b1ff
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi
@@ -0,0 +1,432 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-a23-a33.dtsi"
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&ths>;
+	};
+
+	mali_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-144000000 {
+			opp-hz = /bits/ 64 <144000000>;
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+		};
+
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+		};
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun8i-a33-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&link_codec>;
+		simple-audio-card,bitclock-master = <&link_codec>;
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,aux-devs = <&codec_analog>;
+		simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&dai>;
+		};
+
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&codec 0>;
+		};
+	};
+
+	soc {
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-a33-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun8i-a33-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SS>;
+			reset-names = "ahb";
+		};
+
+		dai: dai@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22c00 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22e00 {
+			#sound-dai-cells = <1>;
+			compatible = "allwinner,sun8i-a33-codec";
+			reg = <0x01c22e00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "bus", "mod";
+			status = "disabled";
+		};
+
+		ths: ths@1c25000 {
+			compatible = "allwinner,sun8i-a33-ths";
+			reg = <0x01c25000 0x100>;
+			#thermal-sensor-cells = <0>;
+			#io-channel-cells = <0>;
+		};
+
+		dsi: dsi@1ca0000 {
+			compatible = "allwinner,sun6i-a31-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_SCLK>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port {
+				dsi_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_dsi>;
+				};
+			};
+		};
+
+		dphy: d-phy@1ca1000 {
+			compatible = "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map2 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&mali 1 THERMAL_NO_LIMIT>;
+				};
+
+				map3 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&mali 2 THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert0: gpu_alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_alert1: cpu_alert1 {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu_alert1: gpu_alert1 {
+					/* milliCelsius */
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&be0 {
+	compatible = "allwinner,sun8i-a33-display-backend";
+	/* A33 has an extra "SAT" module packed inside the display backend */
+	reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+	reg-names = "be", "sat";
+	clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+		 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+	clock-names = "ahb", "mod",
+		      "ram", "sat";
+	resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+	reset-names = "be", "sat";
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-a33-ccu";
+};
+
+&de {
+	compatible = "allwinner,sun8i-a33-display-engine";
+};
+
+&drc0 {
+	compatible = "allwinner,sun8i-a33-drc";
+};
+
+&fe0 {
+	compatible = "allwinner,sun8i-a33-display-frontend";
+};
+
+&mali {
+	operating-points-v2 = <&mali_opp_table>;
+};
+
+&pio {
+	compatible = "allwinner,sun8i-a33-pinctrl";
+	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+
+	uart0_pb_pins: uart0-pb-pins {
+		pins = "PB0", "PB1";
+		function = "uart0";
+	};
+
+};
+
+&tcon0 {
+	compatible = "allwinner,sun8i-a33-tcon";
+};
+
+&tcon0_out {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	tcon0_out_dsi: endpoint@1 {
+		reg = <1>;
+		remote-endpoint = <&dsi_in_tcon0>;
+	};
+};
+
+&usb_otg {
+	compatible = "allwinner,sun8i-a33-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a33-usb-phy";
+	reg = <0x01c19400 0x14>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts
new file mode 100644
index 0000000000000..c31c97d16024c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -0,0 +1,281 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
+	compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb0_vbus: reg-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp818", "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		swin-supply = <&reg_dcdc1>;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+	/*
+	 * The PHY requires 20ms after all voltages are applied until core
+	 * logic is ready and 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ephy";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	regulator-name = "vcc-wifi";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts
new file mode 100644
index 0000000000000..8d56b103f0630
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts
@@ -0,0 +1,422 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi BPI-M3";
+	compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bananapi-m3:blue:usr";
+			gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "bananapi-m3:green:usr";
+			gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* The WiFi low power clock must be 32768 Hz */
+		assigned-clocks = <&ac100_rtc 1>;
+		assigned-clock-rates = <32768>;
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+
+	/*
+	 * Power supply for the SATA disk, behind a USB-SATA bridge.
+	 * Since it is a USB device, there is no consumer in the DT, so we
+	 * have to keep this always on.
+	 */
+	regulator-sata-disk-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-disk-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+	status = "okay";
+
+	/* TODO GL830 USB-to-SATA bridge downstream w/ GPIO power controls */
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_sw>;
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	allwinner,rx-delay-ps = <700>;
+	allwinner,tx-delay-ps = <700>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&r_cir {
+	clock-frequency = <3000000>;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		fldoin-supply = <&reg_dcdc5>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	/* schematics says 3.1V but FEX file says 3.3V */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	/*
+	 * This powers both the WiFi/BT module's main power, I/O supply,
+	 * and external pull-ups on all the data lines. It should be set
+	 * to the same voltage as the I/O supply (DCDC1 in this case) to
+	 * avoid any leakage or mismatch.
+	 */
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pd";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	/*
+	 * The PHY requires 20ms after all voltages
+	 * are applied until core logic is ready and
+	 * 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC
+	 * ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-name = "vcc-ephy";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts
new file mode 100644
index 0000000000000..870993393fc24
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts
@@ -0,0 +1,464 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cubietech Cubietruck Plus";
+	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "cubietruck-plus:blue:usr";
+			gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+		};
+
+		led-1 {
+			label = "cubietruck-plus:orange:usr";
+			gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
+		};
+
+		led-2 {
+			label = "cubietruck-plus:white:usr";
+			gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
+		};
+
+		led-3 {
+			label = "cubietruck-plus:green:usr";
+			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
+		};
+	};
+
+	usb-hub {
+		/* I2C is not connected */
+		compatible = "smsc,usb3503";
+		initial-mode = <1>; /* initialize in HUB mode */
+		disabled-ports = <1>;
+		intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+		reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
+		connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		refclk-frequency = <19200000>;
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
+	};
+
+	reg_usb2_vbus: reg-usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* The WiFi low power clock must be 32768 Hz */
+		assigned-clocks = <&ac100_rtc 1>;
+		assigned-clock-rates = <32768>;
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* GL830 USB-to-SATA bridge here */
+	status = "okay";
+};
+
+&ehci1 {
+	/* USB3503 HSIC USB 2.0 hub here */
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_dldo4>;
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_sw>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp818", "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	/*
+	 * The schematics say this should be 3.3V, but the FEX file says
+	 * it should be 3V. The latter makes sense, as the WiFi module's
+	 * I/O is indirectly powered from DCDC1, through SW. It is rated
+	 * at 2.98V maximum.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "dp-pwr";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "ephy-io";
+};
+
+&reg_dldo4 {
+	/*
+	 * The PHY requires 20ms after all voltages are applied until core
+	 * logic is ready and 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "ephy";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "dp-bridge-1";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "dp-bridge-2";
+};
+
+&reg_fldo1 {
+	/* TODO should be handled by USB PHY */
+	regulator-always-on;
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	regulator-name = "vcc-wifi-io";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dcdc1>;
+		vddio-supply = <&reg_sw>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
new file mode 100644
index 0000000000000..a7d4ca308990c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
@@ -0,0 +1,506 @@
+/*
+ * Copyright (C) 2017 Touchless Biometric Systems AG
+ * Tomas Novotny <tomas@novotny.cz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TBS A711 Tablet";
+	compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_sw>;
+		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <9>;
+	};
+
+	panel {
+		compatible = "tbs,a711-panel", "panel-lvds";
+		backlight = <&backlight>;
+		power-supply = <&reg_sw>;
+
+		width-mm = <153>;
+		height-mm = <90>;
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			/* 1024x600 @60Hz */
+			clock-frequency = <52000000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hsync-len = <20>;
+			hfront-porch = <180>;
+			hback-porch = <160>;
+			vfront-porch = <12>;
+			vback-porch = <23>;
+			vsync-len = <5>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+
+	reg_gps: reg-gps {
+		compatible = "regulator-fixed";
+		regulator-name = "gps";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	reg_vbat: reg-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	reg_vmain: reg-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "vmain";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vbat>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+
+		/*
+		 * This is actually Bluetooth's clock, but we have to
+		 * hook it up somewheere
+		 */
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+/*
+ * An USB-2 hub is connected here, which also means we don't need to
+ * enable the OHCI controller.
+ */
+&ehci0 {
+	status = "okay";
+};
+
+/*
+ * There's a modem connected here that needs to be initialised before
+ * being able to be enumerated.
+ */
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5206";
+		reg = <0x38>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */
+		reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */
+		vcc-supply = <&reg_ldo_io0>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 WL_WAKE_UP */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pin>;
+	status = "okay";
+};
+
+&r_lradc {
+	vref-supply = <&reg_aldo2>;
+	status = "okay";
+
+	button-210 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <210000>;
+	};
+
+	button-410 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <410000>;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+
+};
+
+#include "axp81x.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1.8";
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-name = "vdd-drampll";
+};
+
+&reg_aldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-always-on;
+	regulator-name = "vcc-io";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpu-A";
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpu-B";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-always-on;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-always-on;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <4200000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi-r";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dsi";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi-f";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-hsic";
+};
+
+&reg_fldo2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-ctp";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-vb";
+	status = "okay";
+};
+
+&reg_sw {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-lcd";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_lvds_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint {
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* There's the BT part of the AP6210 connected to that UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vbat>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		max-speed = <1500000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pb_pins>;
+	status = "okay";
+
+	gnss {
+		compatible = "u-blox,neo-6m";
+
+		v-bckp-supply = <&reg_rtc_ldo>;
+		vcc-supply = <&reg_gps>;
+		current-speed = <9600>;
+	};
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_vmain>;
+	usb2_vbus-supply = <&reg_vmain>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
new file mode 100644
index 0000000000000..94eb3bfc989e2
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
@@ -0,0 +1,1274 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ *
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <3>;
+			#cooling-cells = <2>;
+		};
+
+		cpu100: cpu@100 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x100>;
+			#cooling-cells = <2>;
+		};
+
+		cpu101: cpu@101 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x101>;
+			#cooling-cells = <2>;
+		};
+
+		cpu102: cpu@102 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x102>;
+			#cooling-cells = <2>;
+		};
+
+		cpu103: cpu@103 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x103>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* TODO: PRCM block has a mux for this. */
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		/*
+		 * This is called "internal OSC" in some places.
+		 * It is an internal RC-based oscillator.
+		 * TODO: Its controls are in the PRCM block.
+		 */
+		osc16M: osc16M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <16000000>;
+			clock-output-names = "osc16M";
+		};
+
+		osc16Md512: osc16Md512_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <512>;
+			clock-mult = <1>;
+			clocks = <&osc16M>;
+			clock-output-names = "osc16M-d512";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-a83t-display-engine";
+		allwinner,pipelines = <&mixer0>, <&mixer1>;
+		status = "disabled";
+	};
+
+	cpu0_opp_table: opp-table-cluster0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1128000000 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpu1_opp_table: opp-table-cluster1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1128000000 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-a83t-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_PLL_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rotate: rotate@1020000 {
+			compatible = "allwinner,sun8i-a83t-de2-rotate";
+			reg = <0x1020000 0x10000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&display_clocks CLK_BUS_ROT>,
+				 <&display_clocks CLK_ROT>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_ROT>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-a83t-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+
+					mixer0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		mixer1: mixer@1200000 {
+			compatible = "allwinner,sun8i-a83t-de2-mixer-1";
+			reg = <0x01200000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER1>,
+				 <&display_clocks CLK_MIXER1>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_WB>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					mixer1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_mixer1>;
+					};
+
+					mixer1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_mixer1>;
+					};
+				};
+			};
+		};
+
+		cpucfg@1700000 {
+			compatible = "allwinner,sun8i-a83t-cpucfg";
+			reg = <0x01700000 0x400>;
+		};
+
+		cci@1790000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01790000 0x10000>;
+			ranges = <0x0 0x01790000 0x10000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		syscon: syscon@1c00000 {
+			compatible = "allwinner,sun8i-a83t-system-controller",
+				"syscon";
+			reg = <0x01c00000 0x1000>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-a83t-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-a83t-tcon-lcd";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch0";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd", "lvds";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+
+					tcon0_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON1>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon1>;
+					};
+
+					tcon1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun8i-a83t-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun8i-a83t-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun8i-a83t-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sid: eeprom@1c14000 {
+			compatible = "allwinner,sun8i-a83t-sid";
+			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 8>;
+			};
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-a83t-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_SS>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "bus", "mod";
+		};
+
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-a83t-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-a83t-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-a83t-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x14>,
+			      <0x01c1b800 0x14>;
+			reg-names = "phy_ctrl",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_HSIC>,
+				 <&ccu CLK_USB_HSIC_12M>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb2_hsic_12M";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_HSIC>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-a83t-ehci",
+				     "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-a83t-ohci",
+				     "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun8i-a83t-ehci",
+				     "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-a83t-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc16Md512>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-a83t-pinctrl";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c20800 0x400>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			/omit-if-no-ref/
+			csi_8bit_parallel_pins: csi-8bit-parallel-pins {
+				pins = "PE0", "PE2", "PE3", "PE6", "PE7",
+				       "PE8", "PE9", "PE10", "PE11",
+				       "PE12", "PE13";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi_mclk_pin: csi-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
+			emac_rgmii_pins: emac-rgmii-pins {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD11", "PD12", "PD13", "PD14", "PD18",
+				       "PD19", "PD21", "PD22", "PD23";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			hdmi_pins: hdmi-pins {
+				pins = "PH6", "PH7", "PH8";
+				function = "hdmi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH0", "PH1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH2", "PH3";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			i2c2_pe_pins: i2c2-pe-pins {
+				pins = "PE14", "PE15";
+				function = "i2c2";
+			};
+
+			i2c2_ph_pins: i2c2-ph-pins {
+				pins = "PH4", "PH5";
+				function = "i2c2";
+			};
+
+			i2s1_pins: i2s1-pins {
+				/* I2S1 does not have external MCLK pin */
+				pins = "PG10", "PG11", "PG12", "PG13";
+				function = "i2s1";
+			};
+
+			lcd_lvds_pins: lcd-lvds-pins {
+				pins = "PD18", "PD19", "PD20", "PD21", "PD22",
+				       "PD23", "PD24", "PD25", "PD26", "PD27";
+				function = "lvds0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
+				pins = "PC5", "PC6", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13",
+				       "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			pwm_pin: pwm-pin {
+				pins = "PD28";
+				function = "pwm";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PE18";
+				function = "spdif";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				function = "uart0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart2_pb_pins: uart2-pb-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-spdif",
+				     "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_pins>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 27>;
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-a83t-pwm",
+				     "allwinner,sun8i-h3-pwm";
+			reg = <0x01c21400 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-a83t-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x104>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi: camera@1cb0000 {
+			compatible = "allwinner,sun8i-a83t-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pins>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon1: endpoint {
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-a83t-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun8i-a83t-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun8i-a83t-r-ccu";
+			reg = <0x01f01400 0x400>;
+			clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
+				 <&ccu CLK_PLL_PERIPH>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_cpucfg@1f01c00 {
+			compatible = "allwinner,sun8i-a83t-r-cpucfg";
+			reg = <0x1f01c00 0x400>;
+		};
+
+		r_cir: ir@1f02000 {
+			compatible = "allwinner,sun8i-a83t-ir",
+				"allwinner,sun6i-a31-ir";
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x400>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_cir_pin>;
+			status = "disabled";
+		};
+
+		r_lradc: lradc@1f03c00 {
+			compatible = "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01f03c00 0x100>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-a83t-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+				 <&osc16Md512>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_cir_pin: r-cir-pin {
+				pins = "PL12";
+				function = "s_cir_rx";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a83t-rsb",
+				     "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_RSB>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu RST_APB0_RSB>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ths: thermal-sensor@1f04000 {
+			compatible = "allwinner,sun8i-a83t-ths";
+			reg = <0x01f04000 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu0_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu0_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+
+			trips {
+				cpu1_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu1_hot>;
+					cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
new file mode 100644
index 0000000000000..d729b7c705db5
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on sun8i-h3-bananapi-m2-plus.dts, which is:
+ *   Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Banana Pi BPI-M2-Zero";
+	compatible = "sinovoip,bpi-m2-zero", "allwinner,sun8i-h2-plus";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "bananapi-m2-zero:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-4 {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&reg_vcc1v2>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	/*
+	 * On the production batch of this board the card detect GPIO is
+	 * high active (card inserted), although on the early samples it's
+	 * low active.
+	 */
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <1500000>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+		host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	};
+
+};
+
+&pio {
+	gpio-line-names =
+		/* PA */
+		"CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15",
+			"CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29",
+		"CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05",
+			"CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16",
+		"CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27",
+			"CON2-P40", "CON2-P38", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PB */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PC */
+		"CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24",
+			"CON2-P18", "", "", "CON2-P26",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PD */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "CSI-PWR-EN", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PE */
+		"CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07",
+			"CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20",
+		"CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12",
+			"CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PF */
+		"SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+			"SDC0-D2", "SDC0-DET", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PG */
+		"WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1",
+			"WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX",
+		"BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP",
+			"BT-RST-N", "AP-WAKE-BT", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&r_pio {
+	gpio-line-names =
+		/* PL */
+		"", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36",
+			"VCC-IO-EN", "USB0-ID", "WL-PWR-EN",
+		"PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	/*
+	 * There're two micro-USB connectors, one is power-only and another is
+	 * OTG. The Vbus of these two connectors are connected together, so
+	 * the external USB device will be powered just by the power input
+	 * from the power-only USB port.
+	 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts
new file mode 100644
index 0000000000000..4db0d4bb65ebf
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H2+";
+	compatible = "libretech,all-h3-cc-h2-plus", "allwinner,sun8i-h2-plus";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts
new file mode 100644
index 0000000000000..3356f4210d45b
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* Orange Pi R1 is based on Orange Pi Zero design */
+#include "sun8i-h2-plus-orangepi-zero.dts"
+
+/ {
+	model = "Xunlong Orange Pi R1";
+	compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
+
+	/delete-node/ reg_vcc_wifi;
+
+	/*
+	 * Ths pin of this regulator is the same with the Wi-Fi extra
+	 * regulator on the original Zero. However it's used for USB
+	 * Ethernet rather than the Wi-Fi now.
+	 */
+	reg_vcc_usb_eth: reg-vcc-usb-ethernet {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc-usb-ethernet";
+		enable-active-high;
+		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+	};
+
+	aliases {
+		ethernet1 = &rtl8189etv;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
+	};
+};
+
+&ohci1 {
+	/*
+	 * RTL8152B USB-Ethernet adapter is connected to USB1,
+	 * and it's a USB 2.0 device. So the OHCI1 controller
+	 * can be left disabled.
+	 */
+	status = "disabled";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+
+	rtl8189etv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc_usb_eth>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
new file mode 100644
index 0000000000000..3706216ffb40b
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-h3-orangepi-one.dts, which is:
+ *   Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi Zero";
+	compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus";
+
+	aliases {
+		serial0 = &uart0;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet0 = &emac;
+		ethernet1 = &xr819;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc_wifi: reg_vcc_wifi {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc-wifi";
+		enable-active-high;
+		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		enable-active-high;
+		gpios-states = <1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	xr819: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi0 {
+	/* Disable SPI NOR by default: it optional on Orange Pi Zero boards */
+	status = "disabled";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/*
+	 * USB Type-A port VBUS is always on. However, MicroUSB VBUS can only
+	 * power up the board; when it's used as OTG port, this VBUS is
+	 * always off even if the board is powered via GPIO pins.
+	 */
+	status = "okay";
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts
new file mode 100644
index 0000000000000..fc4a8c3d084df
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus-v1.2.dtsi"
+
+/ {
+	model = "Banana Pi BPI-M2-Plus v1.2 H3";
+	compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts
new file mode 100644
index 0000000000000..195a75da13f1b
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+	model = "Banana Pi BPI-M2-Plus H3";
+	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts
new file mode 100644
index 0000000000000..a6d38ecee141d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts
@@ -0,0 +1,238 @@
+/*
+ * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Beelink X2";
+	compatible = "roofull,beelink-x2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &emac;
+		ethernet1 = &sdiowifi;
+	};
+
+	cec {
+		compatible = "cec-gpio";
+		cec-gpios = <&pio 0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PA14 */
+		hdmi-phandle = <&hdmi>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "beelink-x2:blue:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "beelink-x2:red:standby";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	sound_spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	sdiowifi: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on except for the OTG port */
+	status = "okay";
+	usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts
new file mode 100644
index 0000000000000..02fbe00cde97a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3-emlid-neutis-n5h3.dtsi"
+
+/ {
+	model = "Emlid Neutis N5H3 Developer board";
+	compatible = "emlid,neutis-n5h3-devboard",
+		     "emlid,neutis-n5h3",
+		     "allwinner,sun8i-h3";
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0>, <1300000 0x1>;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi
new file mode 100644
index 0000000000000..35e71f46c197e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+#include "sunxi-h3-h5-emlid-neutis.dtsi"
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts
new file mode 100644
index 0000000000000..a8b2f0f1c11d6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H3";
+	compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts
new file mode 100644
index 0000000000000..f5c8ccc5b872c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Centrum Embedded Systems, Jia-Bin Huang <jb@ces.com.tw>
+ * Copyright (C) 2018 Jonathan McDowell <noodles@earth.li>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "MapleBoard MP130";
+	compatible = "mapleboard,mp130", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "mp130:orange:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "mp130:orange:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
+		};
+
+		key-user {
+			label = "user";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"LINEIN", "Line In";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
new file mode 100644
index 0000000000000..343b02b971555
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Karl Palsson <karlp@tweak.net.au>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "FriendlyARM NanoPi Duo2";
+	compatible = "friendlyarm,nanopi-duo2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "nanopi:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "nanopi:green:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "k1";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		enable-active-high;
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		vin-supply = <&reg_vcc5v0>;
+        };
+
+	reg_vdd_sys: vdd-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-sys";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		vin-supply = <&reg_vcc5v0>;
+        };
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: sdio_wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts
new file mode 100644
index 0000000000000..4ba533b0340f2
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyArm NanoPi M1 Plus";
+	compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		serial1 = &uart3;
+		ethernet0 = &emac;
+		ethernet1 = &sdio_wifi;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: sdio_wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts
new file mode 100644
index 0000000000000..69243dcb30a61
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyArm NanoPi M1";
+	compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
new file mode 100644
index 0000000000000..9e1a33f94cadc
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2017 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO Air";
+	compatible = "friendlyarm,nanopi-neo-air", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
new file mode 100644
index 0000000000000..df71fab3cf4ee
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyARM NanoPi NEO";
+	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts
new file mode 100644
index 0000000000000..42cd1131adf3d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
+ * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
+ * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com>
+*/
+
+#include "sun8i-h3-nanopi.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "FriendlyARM NanoPi R1";
+	compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
+
+	aliases {
+		serial1 = &uart1;
+		ethernet0 = &emac;
+		ethernet1 = &wifi;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+
+	reg_vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>;
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0>,
+			 <1300000 0x1>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+
+	leds {
+		led-2 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		};
+
+		led-3 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; /* PA9 */
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi
new file mode 100644
index 0000000000000..cf8413fba6c1a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "k1";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts
new file mode 100644
index 0000000000000..f1f9dbead32a9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi 2";
+	compatible = "xunlong,orangepi-2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet0 = &emac;
+		ethernet1 = &rtl8189;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-2 {
+			label = "sw2";
+			linux,code = <BTN_1>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-4 {
+			label = "sw4";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+	allwinner,audio-routing =
+		"Speaker", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts
new file mode 100644
index 0000000000000..305b34a321f5c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi Lite";
+	compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3";
+
+	aliases {
+		/* The H3 emac is not used so the wifi is ethernet0 */
+		ethernet0 = &rtl8189ftv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts
new file mode 100644
index 0000000000000..59f6f6d5e7ca4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi One";
+	compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A port's VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts
new file mode 100644
index 0000000000000..babf4cf1b2f68
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The Orange Pi PC Plus is an extended version of the regular PC */
+#include "sun8i-h3-orangepi-pc.dts"
+
+/ {
+	model = "Xunlong Orange Pi PC Plus";
+	compatible = "xunlong,orangepi-pc-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet1 = &rtl8189ftv;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+	/* eMMC is missing pull-ups */
+	bias-pull-up;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts
new file mode 100644
index 0000000000000..b96e015f54eef
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts
@@ -0,0 +1,242 @@
+/*
+ * Copyright (C) 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi PC";
+	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-4 {
+			label = "sw4";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1200000>;
+		/*
+		 * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
+		 * however both the Armbian DVFS table and the official one
+		 * have operating points with voltage under 1.1V, and both
+		 * DVFS table are known to work properly at the lowest
+		 * operating point.
+		 *
+		 * Use 1.0V as the minimum voltage instead.
+		 */
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* VBUS on USB host ports are always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts
new file mode 100644
index 0000000000000..d05fa679dcd30
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The Orange Pi Plus is an extended version of the Orange Pi 2 */
+#include "sun8i-h3-orangepi-2.dts"
+
+/ {
+	model = "Xunlong Orange Pi Plus / Plus 2";
+	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+	/* eMMC is missing pull-ups */
+	bias-pull-up;
+};
+
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1200000>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <200>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&usbphy {
+	usb3_vbus-supply = <&reg_usb3_vbus>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts
new file mode 100644
index 0000000000000..b6ca45d18e511
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The Orange Pi Plus 2E is an extended version of the Orange Pi PC Plus,
+ * with 2G RAM and an external gbit ethernet phy.
+ */
+
+#include "sun8i-h3-orangepi-pc-plus.dts"
+
+/ {
+	model = "Xunlong Orange Pi Plus 2E";
+	compatible = "xunlong,orangepi-plus2e", "allwinner,sun8i-h3";
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
new file mode 100644
index 0000000000000..561ea1d2f861c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2018 Diego Rondini <diego.rondini@kynetics.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Zero Plus2 H3";
+	compatible = "xunlong,orangepi-zero-plus2-h3", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>;	/* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * According to schematics CN1 MicroUSB port can be used to take
+	 * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+	 * port cannot provide power externally even if the board is powered
+	 * via GPIO pins. It thus makes sense to force peripheral mode.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts
new file mode 100644
index 0000000000000..4738f3a9efe4b
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Bootlin
+ * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "RerVision H3-DVK";
+	compatible = "rervision,h3-dvk", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts
new file mode 100644
index 0000000000000..7d3e7323b6618
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyARM ZeroPi";
+	compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
new file mode 100644
index 0000000000000..eac2349a23809
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
@@ -0,0 +1,335 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-h3-h5.dtsi"
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000 1040000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000 1200000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp-432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		deinterlace: deinterlace@1400000 {
+			compatible = "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01400000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-h3-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x80000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-h3-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-h3-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-h3-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-h3-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun8i-h3-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-h3-ccu";
+};
+
+&display_clocks {
+	compatible = "allwinner,sun8i-h3-de2-clk";
+};
+
+&mbus {
+	compatible = "allwinner,sun8i-h3-mbus";
+};
+
+&mmc0 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC0>,
+		 <&ccu CLK_MMC0>,
+		 <&ccu CLK_MMC0_OUTPUT>,
+		 <&ccu CLK_MMC0_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&mmc1 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC1>,
+		 <&ccu CLK_MMC1>,
+		 <&ccu CLK_MMC1_OUTPUT>,
+		 <&ccu CLK_MMC1_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&mmc2 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC2>,
+		 <&ccu CLK_MMC2>,
+		 <&ccu CLK_MMC2_OUTPUT>,
+		 <&ccu CLK_MMC2_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&pio {
+	compatible = "allwinner,sun8i-h3-pinctrl";
+};
+
+&rtc {
+	compatible = "allwinner,sun8i-h3-rtc";
+};
+
+&sid {
+	compatible = "allwinner,sun8i-h3-sid";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
new file mode 100644
index 0000000000000..3d9a1524e17e4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	aliases {
+		serial0 = &r_uart;
+		/* Make u-boot set mac-address for wifi without an eeprom */
+		ethernet0 = &sdio_wifi;
+	};
+
+	panel: panel {
+		/* Tablet dts should provide panel compatible */
+		backlight = <&backlight>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_dc1sw>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		/*
+		 * Q8 boards use various PL# pins as wifi-en. On other boards
+		 * these may be connected to a wifi module output pin. To avoid
+		 * short-circuits we configure these as inputs with pull-ups via
+		 * pinctrl, instead of listing them as active-low reset-gpios.
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_q8>;
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status  = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&r_pio {
+	wifi_pwrseq_pin_q8: wifi-pwrseq-pins {
+		pins = "PL6", "PL7", "PL11";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts
new file mode 100644
index 0000000000000..bc394686fedbb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts
@@ -0,0 +1,311 @@
+/*
+ * Copyright (c) 2017 Free Electrons <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BananaPi M2 Magic";
+	compatible = "sinovoip,bananapi-m2m", "allwinner,sun8i-a33";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bpi-m2m:blue:usr";
+			gpios = <&pio 2 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label = "bpi-m2m:green:usr";
+			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			label = "bpi-m2m:red:power";
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&cpu0_opp_table {
+	opp-1104000000 {
+		opp-hz = /bits/ 64 <1104000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+
+	opp-1200000000 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/*
+ * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same
+ * time, with the two being in sync. Since this is not really
+ * supported right now, just use the two as always on, and we will fix
+ * it later.
+ */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_aldo3>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts
new file mode 100644
index 0000000000000..246dec5846a4d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com> */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Nintendo NES Classic Edition";
+	compatible = "nintendo,nes-classic", "allwinner,sun8i-r16",
+		     "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	/*
+	 * UART0 is available on two ports: PB and PF, both are accessible.
+	 * PF can also be used for the SD card so PB is preferred.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pf_pins>;
+	status = "okay";
+};
+
+&nfc {
+	status = "okay";
+
+	/* 2Gb Macronix MX30LF2G18AC (3V) */
+	nand@0 {
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <16>;
+		nand-ecc-step-size = <1024>;
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	/* VBUS is always on because it is wired to the power supply */
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts
new file mode 100644
index 0000000000000..80761d7904ec9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2018 Miquèl RAYNAL <miquel.raynal@bootlin.com> */
+
+/dts-v1/;
+#include "sun8i-r16-nintendo-nes-classic.dts"
+
+/ {
+	model = "Nintendo SuperNES Classic Edition";
+	compatible = "nintendo,super-nes-classic", "nintendo,nes-classic",
+		     "allwinner,sun8i-r16", "allwinner,sun8i-a33";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts
new file mode 100644
index 0000000000000..95543a9c21182
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts
@@ -0,0 +1,313 @@
+/*
+ * Copyright 2016 Quentin Schulz
+ *
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Allwinner R16 EVB (Parrot)";
+	compatible = "allwinner,parrot", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "parrot:led1:usr";
+			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		};
+
+		led-2 {
+			label = "parrot:led2:usr";
+			gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
+	};
+
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * FIXME: An as-yet-unknown accelerometer is connected to this
+	 * i2c bus.
+	 */
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-190 {
+		label = "V+";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "V-";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	drive-strength = <40>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	/*
+	 * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
+	 * Remove next line once it is possible to sync two regulators.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	/*
+	 * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
+	 * Remove next line once it is possible to sync two regulators.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-dsp";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "eldo3";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb0_id_det-gpios = <&pio 3 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD10 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts
new file mode 100644
index 0000000000000..28197bbcb1d56
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts
@@ -0,0 +1,340 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi BPI-M2-Ultra";
+	compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr-led {
+			label = "bananapi:red:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led-green {
+			label = "bananapi:green:user";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led-blue {
+			label = "bananapi:blue:user";
+			gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&ir0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+/*
+ * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
+ * time, with the two being in sync, to be able to meet maximum power
+ * consumption during transmits. Since this is not really supported
+ * right now, just use the two as always on, and we will fix it later.
+ */
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		/* TODO host wake line connected to PMIC GPIO pins */
+		shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+		max-speed = <1500000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi
new file mode 100644
index 0000000000000..649928b361afd
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi
@@ -0,0 +1,52 @@
+/{
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1000000 1000000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1160000 1160000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1240000 1240000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1300000 1300000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
new file mode 100644
index 0000000000000..9f39b5a2bb35e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+//  Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+//  Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_aldo2>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_aldo2>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pf-supply = <&reg_dldo4>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts
new file mode 100644
index 0000000000000..0bd1336206b83
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+//	Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+//	Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+/dts-v1/;
+#include "sun8i-r40-feta40i.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Forlinx OKA40i-C";
+	compatible = "forlinx,oka40i-c", "forlinx,feta40i-c", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5; /* RS485 */
+		serial7 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5 { /* this is how the leds are labeled on the board */
+			gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led-6 {
+			gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo2>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 11 GPIO_ACTIVE_LOW>; // PI11
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 10 GPIO_ACTIVE_LOW>; // PI10
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_rts_cts_pi_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+&uart5 { /* RS485 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
new file mode 100644
index 0000000000000..4ef26d8f53403
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
@@ -0,0 +1,1326 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <20000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-r40-display-engine";
+		allwinner,pipelines = <&mixer0>, <&mixer1>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-r40-de2-clk",
+				     "allwinner,sun8i-h3-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+					mixer0_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		mixer1: mixer@1200000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-1";
+			reg = <0x01200000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER1>,
+				 <&display_clocks CLK_MIXER1>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_WB>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer1_out: port@1 {
+					reg = <1>;
+					mixer1_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
+					};
+				};
+			};
+		};
+
+		deinterlace: deinterlace@1400000 {
+			compatible = "allwinner,sun8i-r40-deinterlace",
+				     "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01400000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 /*
+				  * NOTE: Contrary to what datasheet claims,
+				  * DRAM deinterlace gate doesn't exist and
+				  * it's shared with CSI1.
+				  */
+				 <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-r40-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-r40-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		nmi_intc: interrupt-controller@1c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-r40-dma",
+				     "allwinner,sun50i-a64-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			dma-channels = <16>;
+			dma-requests = <31>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun8i-r40-csi0",
+				     "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
+			resets = <&ccu RST_BUS_CSI0>;
+			interconnects = <&mbus 5>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-r40-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+			<&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc0_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun8i-r40-emmc",
+				     "allwinner,sun50i-a64-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc2_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC3>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc3_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,sun8i-r40-usb-phy";
+			reg = <0x01c13400 0x14>,
+			      <0x01c14800 0x4>,
+			      <0x01c19800 0x4>,
+			      <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-r40-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun8i-r40-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+			resets = <&ccu RST_BUS_SATA>;
+			reset-names = "ahci";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c19000 {
+			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+			reg = <0x01c19000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c19400 {
+			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+			reg = <0x01c19400 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@1c1c000 {
+			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-r40-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@1c20400 {
+			compatible = "allwinner,sun8i-r40-rtc";
+			reg = <0x01c20400 0x400>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-r40-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			can_ph_pins: can-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			can_pa_pins: can-pa-pins {
+				pins = "PA16", "PA17";
+				function = "can";
+			};
+
+			clk_out_a_pin: clk-out-a-pin {
+				pins = "PI12";
+				function = "clk_out_a";
+			};
+
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi0-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_mclk_pin: csi0-mclk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+				       "PA4", "PA5", "PA6", "PA7",
+				       "PA8", "PA10", "PA11", "PA12",
+				       "PA13", "PA15", "PA16";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			i2c4_pins: i2c4-pins {
+				pins = "PI2", "PI3";
+				function = "i2c4";
+			};
+
+			ir0_pins: ir0-pins {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			ir1_pins: ir1-pins {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pg_pins: mmc1-pg-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC5", "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13", "PC14",
+				       "PC15", "PC24";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc3_pins: mmc3-pins {
+				pins = "PI4", "PI5", "PI6",
+				       "PI7", "PI8", "PI9";
+				function = "mmc3";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pc_pin: spi0-cs0-pc-pin {
+				pins = "PC23";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pi_pins: spi1-pi-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs1_pi_pin: spi1-cs1-pi-pin {
+				pins = "PI15";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart2_pi_pins: uart2-pi-pins {
+				pins = "PI18", "PI19";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{
+				pins = "PI16", "PI17";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart4_pg_pins: uart4-pg-pins {
+				pins = "PG10", "PG11";
+				function = "uart4";
+			};
+
+			/omit-if-no-ref/
+			uart5_ph_pins: uart5-ph-pins {
+				pins = "PH6", "PH7";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
+			uart7_pi_pins: uart7-pi-pins {
+				pins = "PI20", "PI21";
+				function = "uart7";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun8i-r40-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c21800 0x400>;
+			pinctrl-0 = <&ir0_pins>;
+			pinctrl-names = "default";
+			clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_IR0>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun8i-r40-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c21c00 0x400>;
+			pinctrl-0 = <&ir1_pins>;
+			pinctrl-names = "default";
+			clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_IR1>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S0>;
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S1>;
+			dmas = <&dma 4>, <&dma 4>;
+			dma-names = "rx", "tx";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S2>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+		};
+
+		ths: thermal-sensor@1c24c00 {
+			compatible = "allwinner,sun8i-r40-ths";
+			reg = <0x01c24c00 0x100>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			/* TODO: add nvmem-cells for calibration */
+			#thermal-sensor-cells = <1>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART6>;
+			resets = <&ccu RST_BUS_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART7>;
+			resets = <&ccu RST_BUS_UART7>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun8i-r40-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CAN>;
+			resets = <&ccu RST_BUS_CAN>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@1c2c000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2c000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-r40-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+		};
+
+		gmac: ethernet@1c50000 {
+			compatible = "allwinner,sun8i-r40-gmac";
+			syscon = <&ccu>;
+			reg = <0x01c50000 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_GMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_GMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			gmac_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun8i-r40-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu 155>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0x80000000>;
+			#interconnect-cells = <1>;
+		};
+
+		tcon_top: tcon-top@1c70000 {
+			compatible = "allwinner,sun8i-r40-tcon-top";
+			reg = <0x01c70000 0x1000>;
+			clocks = <&ccu CLK_BUS_TCON_TOP>,
+				 <&ccu CLK_TCON_TV0>,
+				 <&ccu CLK_TVE0>,
+				 <&ccu CLK_TCON_TV1>,
+				 <&ccu CLK_TVE1>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus",
+				      "tcon-tv0",
+				      "tve0",
+				      "tcon-tv1",
+				      "tve1",
+				      "dsi";
+			clock-output-names = "tcon-top-tv0",
+					     "tcon-top-tv1",
+					     "tcon-top-dsi";
+			resets = <&ccu RST_BUS_TCON_TOP>;
+			#clock-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_top_mixer0_in: port@0 {
+					reg = <0>;
+
+					tcon_top_mixer0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_mixer1_in: port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					tcon_top_mixer1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer1_out: port@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
+					};
+				};
+
+				tcon_top_hdmi_in: port@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+
+					tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_tv0_out_tcon_top>;
+					};
+
+					tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_tv1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_hdmi_out: port@5 {
+					reg = <5>;
+
+					tcon_top_hdmi_out_hdmi: endpoint {
+						remote-endpoint = <&hdmi_in_tcon_top>;
+					};
+				};
+			};
+		};
+
+		tcon_tv0: lcd-controller@1c73000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c73000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+					};
+
+					tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
+					};
+				};
+
+				tcon_tv0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv0_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+					};
+				};
+			};
+		};
+
+		tcon_tv1: lcd-controller@1c74000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c74000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV1>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
+					};
+
+					tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
+					};
+				};
+
+				tcon_tv1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv1_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
+					};
+				};
+			};
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-r40-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-r40-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
+			clock-names = "bus", "mod", "pll-0", "pll-1";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi
new file mode 100644
index 0000000000000..872d56caa9ce7
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		power-supply = <&reg_dc1sw>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	/*
+	 * The gsl1680 is rated at 400KHz and it will not work reliable at
+	 * 100KHz, this has been confirmed on multiple different q8 tablets.
+	 * The gsl1680 is the only device on this bus.
+	 */
+	clock-frequency = <400000>;
+
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
+		interrupt-parent = <&pio>;
+		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
+		power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+		/* Tablet dts must provide reg and compatible */
+		status = "disabled";
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi
new file mode 100644
index 0000000000000..052b010a5607a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Elimo Impetus SoM";
+	compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts
new file mode 100644
index 0000000000000..039677c2cc653
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-s3-elimo-impetus.dtsi"
+
+/ {
+	model = "Elimo Initium";
+	compatible = "elimo,initium", "elimo,impetus", "sochip,s3",
+		     "allwinner,sun8i-v3";
+
+	aliases {
+		serial1 = &uart1;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts
new file mode 100644
index 0000000000000..d18192d51d1b6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sipeed Lichee Zero Plus";
+	compatible = "sipeed,lichee-zero-plus", "sochip,s3",
+		     "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
new file mode 100644
index 0000000000000..20966e954eda8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "PineCube IP Camera";
+	compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "pine64:ir:led1";
+			gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+		};
+
+		led2 {
+			label = "pine64:ir:led2";
+			gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_wifi: vcc-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */
+		vin-supply = <&reg_dcdc3>;
+		startup-delay-us = <200000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&csi1_8bit_pins>;
+	status = "okay";
+
+	port {
+		csi1_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pe_pins>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&csi1_mclk_pin>;
+		clocks = <&ccu CLK_CSI1_MCLK>;
+		clock-names = "xclk";
+
+		AVDD-supply = <&reg_ldo3>;
+		DOVDD-supply = <&reg_ldo3>;
+		DVDD-supply = <&reg_ldo4>;
+		reset-gpios = <&pio 4 23 GPIO_ACTIVE_LOW>; /* PE23 */
+		powerdown-gpios = <&pio 4 24 GPIO_ACTIVE_HIGH>; /* PE24 */
+
+		port {
+			ov5640_ep: endpoint {
+				remote-endpoint = <&csi1_ep>;
+				bus-width = <8>;
+				hsync-active = <1>; /* Active high */
+				vsync-active = <0>; /* Active low */
+				data-active = <1>;  /* Active high */
+				pclk-sample = <1>;  /* Rising */
+			};
+		};
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Setup";
+		linux,code = <KEY_SETUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc_wifi>;
+	vqmmc-supply = <&reg_dcdc3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_dcdc3>;
+	vcc-pe-supply = <&reg_ldo3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-sys-cpu-ephy";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-dovdd-2v8-csi";
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts
new file mode 100644
index 0000000000000..94e24b5926dd7
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+
+#include "sun8i-t113s.dtsi"
+#include "sunxi-d1s-t113-mangopi-mq-r.dtsi"
+
+/ {
+	model = "MangoPi MQ-R-T113";
+	compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s";
+
+	aliases {
+		ethernet0 = &rtl8189ftv;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&mmc1 {
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 = WL_WAKE_AP */
+		interrupt-names = "host-wake";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi
new file mode 100644
index 0000000000000..804aa197a24f8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <riscv/allwinner/sunxi-d1s-t113.dtsi>
+#include <riscv/allwinner/sunxi-d1-t113.dtsi>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+	};
+
+	gic: interrupt-controller@1c81000 {
+		compatible = "arm,gic-400";
+		reg = <0x03021000 0x1000>,
+		      <0x03022000 0x2000>,
+		      <0x03024000 0x2000>,
+		      <0x03026000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts
new file mode 100644
index 0000000000000..9f472521f4a45
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2018 Hao Zhang <hao5781286@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "t3-cqa3t-bv3";
+	compatible = "qihua,t3-cqa3t-bv3", "allwinner,sun8i-t3",
+		     "allwinner,sun8i-r40";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pg";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-dldo3";
+};
+
+&reg_eldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts
new file mode 100644
index 0000000000000..117aeece4e551
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+#include "sun8i-v3-sl631.dtsi"
+
+/ {
+	model = "SL631 Action Camera with IMX179";
+	compatible = "allwinner,sl631-imx179", "allwinner,sl631",
+		     "allwinner,sun8i-v3";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi
new file mode 100644
index 0000000000000..6f93f8c49f845
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+/dts-v1/;
+
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SL631 Action Camera";
+	compatible = "allwinner,sl631", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pb_pins>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-174 {
+		label = "Down";
+		linux,code = <KEY_DOWN>;
+		channel = <0>;
+		voltage = <174603>;
+	};
+
+	button-384 {
+		label = "Up";
+		linux,code = <KEY_UP>;
+		channel = <0>;
+		voltage = <384126>;
+	};
+
+	button-593 {
+		label = "OK";
+		linux,code = <KEY_OK>;
+		channel = <0>;
+		voltage = <593650>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	vmmc-supply = <&reg_dcdc3>;
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_dcdc3>;
+	vcc-pe-supply = <&reg_dcdc3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-sys-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vdd-3v3";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
new file mode 100644
index 0000000000000..186c30cbe6ee8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+#include "sun8i-v3s.dtsi"
+
+/ {
+	soc {
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-v3-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_pins>;
+			resets = <&ccu RST_BUS_I2S0>;
+			status = "disabled";
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-v3-ccu";
+};
+
+&codec_analog {
+	compatible = "allwinner,sun8i-v3-codec-analog",
+		     "allwinner,sun8i-h3-codec-analog";
+};
+
+&emac {
+	/delete-property/ phy-handle;
+	/delete-property/ phy-mode;
+};
+
+&mdio_mux {
+	external_mdio: mdio@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&pio {
+	compatible = "allwinner,sun8i-v3-pinctrl";
+
+	i2s0_pins: i2s0-pins {
+		pins = "PG10", "PG11", "PG12", "PG13";
+		function = "i2s";
+	};
+
+	uart1_pg_pins: uart1-pg-pins {
+		pins = "PG6", "PG7";
+		function = "uart1";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts
new file mode 100644
index 0000000000000..752ad05c8f831
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-v3s-licheepi-zero.dts"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Lichee Pi Zero with Dock";
+	compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
+		     "allwinner,sun8i-v3s";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	leds {
+		/* The LEDs use PG0~2 pins, which conflict with MMC1 */
+		status = "disabled";
+	};
+};
+
+&emac {
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button-600 {
+		label = "Select";
+		linux,code = <KEY_SELECT>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Start";
+		linux,code = <KEY_OK>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc1 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts
new file mode 100644
index 0000000000000..2e4587d26ce59
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-v3s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Lichee Pi Zero";
+	compatible = "licheepi,licheepi-zero", "allwinner,sun8i-v3s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue_led {
+			label = "licheepi:blue:usr";
+			gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+		};
+
+		green_led {
+			label = "licheepi:green:usr";
+			gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+			default-state = "on";
+		};
+
+		red_led {
+			label = "licheepi:red:usr";
+			gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */
+		};
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
new file mode 100644
index 0000000000000..3b9a282c27463
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
@@ -0,0 +1,621 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0";
+			clocks = <&display_clocks CLK_MIXER0>,
+				 <&ccu CLK_TCON0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-v3s-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-v3s-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-v3s-de2-mixer";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks 0>,
+				 <&display_clocks 6>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-v3s-system-control",
+				     "allwinner,sun8i-h3-system-control";
+			reg = <0x01c00000 0xd0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		nmi_intc: interrupt-controller@1c000d0 {
+			compatible = "allwinner,sun8i-v3s-nmi",
+				     "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c000d0 0x0c>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-v3s-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-v3s-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>,
+				 <&ccu CLK_TCON0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		crypto@1c15000 {
+			compatible = "allwinner,sun8i-v3s-crypto",
+				     "allwinner,sun8i-a33-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 16>, <&dma 16>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_CE>;
+			reset-names = "ahb";
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-h3-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-v3s-usb-phy";
+			reg = <0x01c19400 0x2c>,
+			      <0x01c1a800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-v3s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@1c20400 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-v3-rtc";
+			reg = <0x01c20400 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc32k>;
+			clock-output-names = "osc32k", "osc32k-out";
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-v3s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			/omit-if-no-ref/
+			csi0_mclk_pin: csi0-mclk-pin {
+				pins = "PE20";
+				function = "csi_mipi";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bit_pins: csi1-8bit-pins {
+				pins = "PE0", "PE2", "PE3", "PE8", "PE9",
+				       "PE10", "PE11", "PE12", "PE13", "PE14",
+				       "PE15";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi1_mclk_pin: csi1-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB6", "PB7";
+				function = "i2c0";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pb_pins: i2c1-pb-pins {
+				pins = "PB8", "PB9";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pe_pins: i2c1-pe-pins {
+				pins = "PE21", "PE22";
+				function = "i2c1";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB8", "PB9";
+				function = "uart0";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-v3s-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-v3s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21400 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-v3s-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+
+		codec_analog: codec-analog@1c23000 {
+			compatible = "allwinner,sun8i-v3s-codec-analog";
+			reg = <0x01c23000 0x4>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "tx", "rx";
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "tx", "rx";
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "tx", "rx";
+			resets = <&ccu RST_BUS_UART2>;
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-v3s-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			phy-handle = <&int_mii_phy>;
+			phy-mode = "mii";
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+			mdio_mux: mdio-mux {
+				compatible = "allwinner,sun8i-h3-mdio-mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio-parent-bus = <&mdio>;
+				/* Only one MDIO is usable at the time */
+				internal_mdio: mdio@1 {
+					compatible = "allwinner,sun8i-h3-mdio-internal";
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					int_mii_phy: ethernet-phy@1 {
+						compatible = "ethernet-phy-ieee802.3-c22";
+						reg = <1>;
+						clocks = <&ccu CLK_BUS_EPHY>;
+						resets = <&ccu RST_BUS_EPHY>;
+					};
+				};
+			};
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi1: camera@1cb4000 {
+			compatible = "allwinner,sun8i-v3s-csi";
+			reg = <0x01cb4000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI1_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts
new file mode 100644
index 0000000000000..434871040aca0
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts
@@ -0,0 +1,310 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi M2 Berry";
+	compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr-led {
+			label = "bananapi:red:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led {
+			label = "bananapi:green:user";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+/*
+ * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
+ * time, with the two being in sync, to be able to meet maximum power
+ * consumption during transmits. Since this is not really supported
+ * right now, just use the two as always on, and we will fix it later.
+ */
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		/* TODO host wake line connected to PMIC GPIO pins */
+		shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+		max-speed = <1500000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
new file mode 100644
index 0000000000000..c8ca8cb7f5c94
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
@@ -0,0 +1,508 @@
+/*
+ * Copyright 2015 Tyler Baker
+ *
+ * Tyler Baker <tyler.baker@linaro.org>
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cubietech Cubieboard4";
+	compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "cubieboard4:green:usr";
+			gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
+		};
+
+		led-1 {
+			label = "cubieboard4:red:usr";
+			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		};
+	};
+
+	vga-connector {
+		compatible = "vga-connector";
+		label = "vga";
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_dac_out>;
+			};
+		};
+	};
+
+	vga-dac {
+		compatible = "corpro,gm7123", "adi,adv7123";
+		vdd-supply = <&reg_dcdc1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_dac_in: endpoint {
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_dac_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH18 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_cldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc1_pins {
+	bias-pull-up;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
+&pio {
+	vcc-pa-supply = <&reg_ldo_io1>;
+	vcc-pb-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dc1sw>;
+	vcc-pe-supply = <&reg_eldo2>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_ldo_io0>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_dldo2>;
+	vcc-pm-supply = <&reg_eldo3>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp809: pmic@3a3 {
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				/*
+				 * TODO: This should be handled by the
+				 * USB PHY driver.
+				 */
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc33-usbh";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pb-io-cam";
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_dc1sw: dc1sw {
+				regulator-name = "vcc-pd";
+			};
+
+			reg_dc5ldo: dc5ldo {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus-09-usbh";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-usb0-hdmi";
+			};
+
+			reg_dcdc5: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1425000>;
+				regulator-max-microvolt = <1575000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dldo1: dldo1 {
+				/*
+				 * The WiFi chip supports a wide range
+				 * (3.0 ~ 4.8V) of voltages, and so does
+				 * this regulator (3.0 ~ 4.2V), but
+				 * Allwinner SDK always sets it to 3.3V.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo2: dldo2 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_eldo1: eldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dvdd-cam";
+			};
+
+			reg_eldo2: eldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_eldo3: eldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pm-codec-io1";
+			};
+
+			reg_ldo_io0: ldo_io0 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pg";
+			};
+
+			reg_ldo_io1: ldo_io1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc-pa-gmac-2v5";
+			};
+
+			reg_rtc_ldo: rtc_ldo {
+				regulator-name = "vcc-rtc-vdd1v8-io";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				/*
+				 * The PHY requires 20ms after all voltages
+				 * are applied until core logic is ready and
+				 * 30ms after the reset pin is de-asserted.
+				 * Set a 100ms delay to account for PMIC
+				 * ramp time and board traces.
+				 */
+				regulator-enable-ramp-delay = <100000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp809.dtsi"
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint {
+		remote-endpoint = <&vga_dac_in>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts b/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts
new file mode 100644
index 0000000000000..5c3580d712e40
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts
@@ -0,0 +1,510 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Merrii A80 Optimus Board";
+	compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* The LED names match those found on the board */
+		led2 {
+			label = "optimus:led2:usr";
+			gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			label = "optimus:led3:usr";
+			gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */
+		};
+
+		led4 {
+			label = "optimus:led4:usr";
+			gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH8 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_cldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc1_pins {
+	bias-pull-up;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
+&pio {
+	vcc-pa-supply = <&reg_ldo_io1>;
+	vcc-pb-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo2>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_ldo_io0>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_dldo2>;
+	vcc-pm-supply = <&reg_eldo3>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp809: pmic@3a3 {
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				/*
+				 * TODO: This should be handled by the
+				 * USB PHY driver.
+				 */
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc33-usbh";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pb-io-cam";
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_dc5ldo: dc5ldo {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus-09-usbh";
+			};
+
+			dc1sw {
+				/* unused */
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-usb0-hdmi";
+			};
+
+			reg_dcdc5: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1425000>;
+				regulator-max-microvolt = <1575000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dldo1: dldo1 {
+				/*
+				 * The WiFi chip supports a wide range
+				 * (3.0 ~ 4.8V) of voltages, and so does
+				 * this regulator (3.0 ~ 4.2V), but
+				 * Allwinner SDK always sets it to 3.3V.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo2: dldo2 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_eldo1: eldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dvdd-cam";
+			};
+
+			reg_eldo2: eldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_eldo3: eldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pm-codec-io1";
+			};
+
+			reg_ldo_io0: ldo_io0 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pg";
+			};
+
+			reg_ldo_io1: ldo_io1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc-pa-gmac-2v5";
+			};
+
+			reg_rtc_ldo: rtc_ldo {
+				regulator-name = "vcc-rtc-vdd1v8-io";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				/*
+				 * The PHY requires 20ms after all voltages
+				 * are applied until core logic is ready and
+				 * 30ms after the reset pin is de-asserted.
+				 * Set a 100ms delay to account for PMIC
+				 * ramp time and board traces.
+				 */
+				regulator-enable-ramp-delay = <100000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp809.dtsi"
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy1 {
+	phy-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy2 {
+	phy-supply = <&reg_bldo4>;
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
+};
+
+&usbphy3 {
+	phy-supply = <&reg_usb3_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
new file mode 100644
index 0000000000000..7d3f3300f4316
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
@@ -0,0 +1,1253 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun9i-a80-ccu.h>
+#include <dt-bindings/clock/sun9i-a80-de.h>
+#include <dt-bindings/clock/sun9i-a80-usb.h>
+#include <dt-bindings/reset/sun9i-a80-ccu.h>
+#include <dt-bindings/reset/sun9i-a80-de.h>
+#include <dt-bindings/reset/sun9i-a80-usb.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x3>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x103>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		/*
+		 * This clock is actually configurable from the PRCM address
+		 * space. The external 24M oscillator can be turned off, and
+		 * the clock switched to an internal 16M RC oscillator. Under
+		 * normal operation there's no reason to do this, and the
+		 * default is to use the external good one, so just model this
+		 * as a fixed clock. Also it is not entirely clear if the
+		 * osc24M mux in the PRCM affects the entire clock tree, which
+		 * would also throw all the PLL clock rates off, or just the
+		 * downstream clocks in the PRCM.
+		 */
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		/*
+		 * The 32k clock is from an external source, normally the
+		 * AC100 codec/RTC chip. This serves as a placeholder for
+		 * board dts files to specify the source.
+		 */
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clock-output-names = "osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: mii_phy_tx_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: gmac_int_tx_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@800030 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x00800030 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+
+		cpus_clk: clk@8001410 {
+			compatible = "allwinner,sun9i-a80-cpus-clk";
+			reg = <0x08001410 0x4>;
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>,
+				 <&ccu CLK_PLL_PERIPH0>,
+				 <&ccu CLK_PLL_AUDIO>;
+			clock-output-names = "cpus";
+		};
+
+		ahbs: clk-ahbs {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&cpus_clk>;
+			clock-output-names = "ahbs";
+		};
+
+		apbs: clk@800141c {
+			compatible = "allwinner,sun8i-a23-apb0-clk";
+			reg = <0x0800141c 0x4>;
+			#clock-cells = <0>;
+			clocks = <&ahbs>;
+			clock-output-names = "apbs";
+		};
+
+		apbs_gates: clk@8001428 {
+			compatible = "allwinner,sun9i-a80-apbs-gates-clk";
+			reg = <0x08001428 0x4>;
+			#clock-cells = <1>;
+			clocks = <&apbs>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<4>, <5>,
+					<6>, <7>,
+					<12>, <13>,
+					<16>, <17>,
+					<18>, <20>;
+			clock-output-names = "apbs_pio", "apbs_ir",
+					"apbs_timer", "apbs_rsb",
+					"apbs_uart", "apbs_1wire",
+					"apbs_i2c0", "apbs_i2c1",
+					"apbs_ps2_0", "apbs_ps2_1",
+					"apbs_dma", "apbs_i2s0",
+					"apbs_i2s1", "apbs_twd";
+		};
+
+		r_1wire_clk: clk@8001450 {
+			reg = <0x08001450 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_1wire";
+		};
+
+		r_ir_clk: clk@8001454 {
+			reg = <0x08001454 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_ir";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun9i-a80-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc@20000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		sram_b: sram@20000 {
+			/* 256 KiB secure SRAM at 0x20000 */
+			compatible = "mmio-sram";
+			reg = <0x00020000 0x40000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00020000 0x40000>;
+
+			smp-sram@1000 {
+				/*
+				 * This is checked by BROM to determine if
+				 * cpu0 should jump to SMP entry vector
+				 */
+				compatible = "allwinner,sun9i-a80-smp-sram";
+				reg = <0x1000 0x8>;
+			};
+		};
+
+		gmac: ethernet@830000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x00830000 0x1054>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			resets = <&ccu RST_BUS_GMAC>;
+			reset-names = "stmmaceth";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		ehci0: usb@a00000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a00000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@a00400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a00400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>,
+				 <&usb_clocks CLK_USB_OHCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy1: phy@a00800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a00800 0x4>;
+			clocks = <&usb_clocks CLK_USB0_PHY>;
+			clock-names = "phy";
+			resets = <&usb_clocks RST_USB0_PHY>;
+			reset-names = "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		ehci1: usb@a01000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a01000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI1>;
+			resets = <&usb_clocks RST_USB1_HCI>;
+			phys = <&usbphy2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy2: phy@a01800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a01800 0x4>;
+			clocks = <&usb_clocks CLK_USB1_PHY>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB1_HSIC>;
+			clock-names = "phy",
+				      "hsic_12M",
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB1_PHY>,
+				 <&usb_clocks RST_USB1_HSIC>;
+			reset-names = "phy",
+				      "hsic";
+			status = "disabled";
+			#phy-cells = <0>;
+			/* usb1 is always used with HSIC */
+			phy_type = "hsic";
+		};
+
+		ehci2: usb@a02000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a02000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@a02400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a02400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>,
+				 <&usb_clocks CLK_USB_OHCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy3: phy@a02800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a02800 0x4>;
+			clocks = <&usb_clocks CLK_USB2_PHY>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB2_HSIC>;
+			clock-names = "phy",
+				      "hsic_12M",
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB2_PHY>,
+				 <&usb_clocks RST_USB2_HSIC>;
+			reset-names = "phy",
+				      "hsic";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		usb_clocks: clock@a08000 {
+			compatible = "allwinner,sun9i-a80-usb-clks";
+			reg = <0x00a08000 0x8>;
+			clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+			clock-names = "bus", "hosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		cpucfg@1700000 {
+			compatible = "allwinner,sun9i-a80-cpucfg";
+			reg = <0x01700000 0x100>;
+		};
+
+		crypto: crypto@1c02000 {
+			compatible = "allwinner,sun9i-a80-crypto";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_SS>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "bus", "mod";
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc_config_clk: clk@1c13000 {
+			compatible = "allwinner,sun9i-a80-mmc-config-clk";
+			reg = <0x01c13000 0x10>;
+			clocks = <&ccu CLK_BUS_MMC>;
+			resets = <&ccu RST_BUS_MMC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clock-output-names = "mmc0_config", "mmc1_config",
+					     "mmc2_config", "mmc3_config";
+		};
+
+		gic: interrupt-controller@1c41000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c41000 0x1000>,
+			      <0x01c42000 0x2000>,
+			      <0x01c44000 0x2000>,
+			      <0x01c46000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cci: cci@1c90000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01c90000 0x1000>;
+			ranges = <0x0 0x01c90000 0x10000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				 compatible = "arm,cci-400-pmu,r1";
+				 reg = <0x9000 0x5000>;
+				 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		de_clocks: clock@3000000 {
+			compatible = "allwinner,sun9i-a80-de-clks";
+			reg = <0x03000000 0x30>;
+			clocks = <&ccu CLK_DE>,
+				 <&ccu CLK_SDRAM>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "dram",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		fe0: display-frontend@3100000 {
+			compatible = "allwinner,sun9i-a80-display-frontend";
+			reg = <0x03100000 0x40000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_FE0>, <&de_clocks CLK_FE0>,
+				 <&de_clocks CLK_DRAM_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					reg = <1>;
+
+					fe0_out_deu0: endpoint {
+						remote-endpoint = <&deu0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@3140000 {
+			compatible = "allwinner,sun9i-a80-display-frontend";
+			reg = <0x03140000 0x40000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_FE1>, <&de_clocks CLK_FE1>,
+				 <&de_clocks CLK_DRAM_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					reg = <1>;
+
+					fe1_out_deu1: endpoint {
+						remote-endpoint = <&deu1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@3200000 {
+			compatible = "allwinner,sun9i-a80-display-backend";
+			reg = <0x03200000 0x40000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_BE0>, <&de_clocks CLK_BE0>,
+				 <&de_clocks CLK_DRAM_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_deu0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu0_out_be0>;
+					};
+
+					be0_in_deu1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&deu1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_drc0: endpoint {
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@3240000 {
+			compatible = "allwinner,sun9i-a80-display-backend";
+			reg = <0x03240000 0x40000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_BE1>, <&de_clocks CLK_BE1>,
+				 <&de_clocks CLK_DRAM_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_deu0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu0_out_be1>;
+					};
+
+					be1_in_deu1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&deu1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					reg = <1>;
+
+					be1_out_drc1: endpoint {
+						remote-endpoint = <&drc1_in_be1>;
+					};
+				};
+			};
+		};
+
+		deu0: deu@3300000 {
+			compatible = "allwinner,sun9i-a80-deu";
+			reg = <0x03300000 0x40000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DEU0>,
+				 <&de_clocks CLK_IEP_DEU0>,
+				 <&de_clocks CLK_DRAM_DEU0>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DEU0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				deu0_in: port@0 {
+					reg = <0>;
+
+					deu0_in_fe0: endpoint {
+						remote-endpoint = <&fe0_out_deu0>;
+					};
+				};
+
+				deu0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					deu0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_deu0>;
+					};
+
+					deu0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_deu0>;
+					};
+				};
+			};
+		};
+
+		deu1: deu@3340000 {
+			compatible = "allwinner,sun9i-a80-deu";
+			reg = <0x03340000 0x40000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DEU1>,
+				 <&de_clocks CLK_IEP_DEU1>,
+				 <&de_clocks CLK_DRAM_DEU1>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DEU1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				deu1_in: port@0 {
+					reg = <0>;
+
+					deu1_in_fe1: endpoint {
+						remote-endpoint = <&fe1_out_deu1>;
+					};
+				};
+
+				deu1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					deu1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_deu1>;
+					};
+
+					deu1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_deu1>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@3400000 {
+			compatible = "allwinner,sun9i-a80-drc";
+			reg = <0x03400000 0x40000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DRC0>,
+				 <&de_clocks CLK_IEP_DRC0>,
+				 <&de_clocks CLK_DRAM_DRC0>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DRC0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					reg = <0>;
+
+					drc0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+
+		drc1: drc@3440000 {
+			compatible = "allwinner,sun9i-a80-drc";
+			reg = <0x03440000 0x40000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DRC1>,
+				 <&de_clocks CLK_IEP_DRC1>,
+				 <&de_clocks CLK_DRAM_DRC1>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DRC1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc1_in: port@0 {
+					reg = <0>;
+
+					drc1_in_be1: endpoint {
+						remote-endpoint = <&be1_out_drc1>;
+					};
+				};
+
+				drc1_out: port@1 {
+					reg = <1>;
+
+					drc1_out_tcon1: endpoint {
+						remote-endpoint = <&tcon1_in_drc1>;
+					};
+				};
+			};
+		};
+
+		tcon0: lcd-controller@3c00000 {
+			compatible = "allwinner,sun9i-a80-tcon-lcd";
+			reg = <0x03c00000 0x10000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
+			clock-names = "ahb", "tcon-ch0";
+			resets = <&ccu RST_BUS_LCD0>,
+				 <&ccu RST_BUS_EDP>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "edp",
+				      "lvds";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint {
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		tcon1: lcd-controller@3c10000 {
+			compatible = "allwinner,sun9i-a80-tcon-tv";
+			reg = <0x03c10000 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD1>, <&ccu CLK_LCD1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_LCD1>, <&ccu RST_BUS_EDP>;
+			reset-names = "lcd", "edp";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					reg = <0>;
+
+					tcon1_in_drc1: endpoint {
+						remote-endpoint = <&drc1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		ccu: clock@6000000 {
+			compatible = "allwinner,sun9i-a80-ccu";
+			reg = <0x06000000 0x800>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		timer@6000c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x06000c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@6000ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x06000ca0 0x20>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pio: pinctrl@6000800 {
+			compatible = "allwinner,sun9i-a80-pinctrl";
+			reg = <0x06000800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5",
+				       "PA7", "PA8", "PA9", "PA10", "PA12",
+				       "PA13", "PA15", "PA16", "PA17";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PG10", "PG11";
+				function = "i2c3";
+			};
+
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
+				pins = "PD0", "PD1", "PD2", "PD3",
+				       "PD4", "PD5", "PD6", "PD7",
+				       "PD8", "PD9", "PD10", "PD11",
+				       "PD12", "PD13", "PD14", "PD15",
+				       "PD16", "PD17", "PD18", "PD19",
+				       "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1" ,"PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1" ,"PG2", "PG3",
+						 "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12",
+				       "PC13", "PC14", "PC15",
+				       "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH12", "PH13";
+				function = "uart0";
+			};
+
+			uart4_pins: uart4-pins {
+				pins = "PG12", "PG13", "PG14", "PG15";
+				function = "uart4";
+			};
+		};
+
+		uart0: serial@7000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@7000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@7000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@7000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@7001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@7001400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7002800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002800 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@7002c00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002c00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@7003000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@7003400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@7003800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003800 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_wdt: watchdog@8001000 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x08001000 0x20>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		prcm@8001400 {
+			compatible = "allwinner,sun9i-a80-prcm";
+			reg = <0x08001400 0x200>;
+		};
+
+		apbs_rst: reset@80014b0 {
+			reg = <0x080014b0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		nmi_intc: interrupt-controller@80015a0 {
+			compatible = "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x080015a0 0xc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ir: ir@8002000 {
+			compatible = "allwinner,sun6i-a31-ir";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_ir_pins>;
+			clocks = <&apbs_gates 1>, <&r_ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apbs_rst 1>;
+			reg = <0x08002000 0x40>;
+			status = "disabled";
+		};
+
+		r_uart: serial@8002800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x08002800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apbs_gates 4>;
+			resets = <&apbs_rst 4>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@8002c00 {
+			compatible = "allwinner,sun9i-a80-r-pinctrl";
+			reg = <0x08002c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			r_ir_pins: r-ir-pins {
+				pins = "PL6";
+				function = "s_cir_rx";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PN0", "PN1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+		};
+
+		r_rsb: rsb@8003400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x08003400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apbs_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
new file mode 100644
index 0000000000000..43896723a994c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lichee Pi Nano";
+	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
+
+	aliases {
+		mmc0 = &mmc0;
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
new file mode 100644
index 0000000000000..3c61d59ab5f86
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
+ */
+
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@1c00000 {
+			compatible = "allwinner,suniv-f1c100s-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,suniv-f1c100s-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <23>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <24>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,suniv-f1c100s-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <26>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,suniv-f1c100s-usb-phy";
+			reg = <0x01c13400 0x10>;
+			reg-names = "phy_ctrl";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,suniv-f1c100s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,suniv-f1c100s-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,suniv-f1c100s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <38>, <39>, <40>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+			};
+
+			/omit-if-no-ref/
+			i2c0_pd_pins: i2c0-pd-pins {
+				pins = "PD0", "PD12";
+				function = "i2c0";
+			};
+
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			uart0_pe_pins: uart0-pe-pins {
+				pins = "PE0", "PE1";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart1";
+			};
+		};
+
+		i2c0: i2c@1c27000 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27000 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1c27400 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27400 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1c27800 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27800 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,suniv-f1c100s-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <13>, <14>, <15>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20ca0 {
+			compatible = "allwinner,suniv-f1c100s-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <16>;
+			clocks = <&osc32k>;
+		};
+
+		pwm: pwm@1c21000 {
+			compatible = "allwinner,suniv-f1c100s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21000 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir: ir@1c22c00 {
+			compatible = "allwinner,suniv-f1c100s-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c22c00 0x400>;
+			clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&ccu RST_BUS_IR>;
+			interrupts = <6>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c23400 {
+			compatible = "allwinner,suniv-f1c100s-lradc",
+				     "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01c23400 0x400>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c25000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c25400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c25800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts
new file mode 100644
index 0000000000000..2d2a3f026df33
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Arm Ltd,
+ * based on work:
+ *   Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lctech Pi F1C200s";
+	compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
+		     "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pa_pins>;
+	status = "okay";
+};
+
+/*
+ * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected
+ * to Vin, which supplies the board. Host mode works (if the board is powered
+ * otherwise), but peripheral is probably the intention.
+ */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts
new file mode 100644
index 0000000000000..184c245041a6e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Popcorn Computer PopStick v1.1";
+	compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick",
+		     "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi
new file mode 100644
index 0000000000000..235994a4a2ebb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+	/*
+	 * Bananapi M2+ v1.2 uses a GPIO line to change the effective
+	 * resistance on the CPU regulator's feedback pin.
+	 */
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1108475>;
+		regulator-max-microvolt = <1308475>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		gpios-states = <0x1>;
+		states = <1108475 0>, <1308475 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi
new file mode 100644
index 0000000000000..1d1d127cf38f5
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "bananapi-m2-plus:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-4 {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <1500000>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+		host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* USB host VBUS is on as long as VCC-IO is on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi
new file mode 100644
index 0000000000000..d8e5826fb3de3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi
@@ -0,0 +1,111 @@
+/*
+ * sunxi boards common regulator (ahci target power supply, usb-vbus) code
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	reg_ahci_5v: ahci-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "ahci-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 1 9 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_vcc3v0: vcc3v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi b/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi
new file mode 100644
index 0000000000000..e9bc749488bb2
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Arm Ltd.
+/*
+ * Common peripherals and configurations for MangoPi MQ-R boards.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
+		};
+	};
+
+	/* board wide 5V supply directly from the USB-C socket */
+	reg_vcc5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board */
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* XC6206 LDO on the board */
+	reg_avdd2v8: regulator-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_3v3>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+	};
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_3v3>;
+	vcc-pd-supply = <&reg_3v3>;
+	vcc-pe-supply = <&reg_avdd2v8>;
+	vcc-pf-supply = <&reg_3v3>;
+	vcc-pg-supply = <&reg_3v3>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pb_pins>;
+	status = "okay";
+};
+
+/* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
new file mode 100644
index 0000000000000..60804b0e6c56a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis SoMs.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
+		post-power-on-delay-ms = <200>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
+	status = "okay";
+};
+
+
+&de {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;	/* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+		device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Mic",
+		"Mic",  "MBIAS";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi
new file mode 100644
index 0000000000000..ade1cd50e4457
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi
@@ -0,0 +1,979 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-h3-ccu.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-h3-ccu.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0-hdmi";
+			clocks = <&display_clocks CLK_MIXER0>,
+				 <&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		framebuffer-tve {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer1-lcd1-tve";
+			clocks = <&display_clocks CLK_MIXER1>,
+				 <&ccu CLK_TVE>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext_osc32k";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-h3-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-ranges;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-h3-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-h3-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-h3-tcon-tv",
+				     "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c0f000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c10000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c11000 0x1000>;
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sid: eeprom@1c14000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 4>;
+			};
+		};
+
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-h3-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-h3-musb";
+			reg = <0x01c19000 0x400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-h3-usb-phy";
+			reg = <0x01c19400 0x2c>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>,
+			      <0x01c1c800 0x4>,
+			      <0x01c1d800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb3_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1b400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@1c1c000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci3: usb@1c1d000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1d000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@1c1d400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1d400 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			csi_pins: csi-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi";
+			};
+
+			emac_rgmii_pins: emac-rgmii-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD7", "PD8", "PD9", "PD10",
+				       "PD12", "PD13", "PD15", "PD16", "PD17";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PA11", "PA12";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PA18", "PA19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PE12", "PE13";
+				function = "i2c2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14",
+				       "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PA17";
+				function = "spdif";
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PA15", "PA16", "PA14", "PA13";
+				function = "spi1";
+			};
+
+			uart0_pa_pins: uart0-pa-pins {
+				pins = "PA4", "PA5";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PA0", "PA1";
+				function = "uart2";
+			};
+
+			uart2_rts_cts_pins: uart2-rts-cts-pins {
+				pins = "PA2", "PA3";
+				function = "uart2";
+			};
+
+			uart3_pins: uart3-pins {
+				pins = "PA13", "PA14";
+				function = "uart3";
+			};
+
+			uart3_rts_cts_pins: uart3-rts-cts-pins {
+				pins = "PA15", "PA16";
+				function = "uart3";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-h3-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+			mdio-mux {
+				compatible = "allwinner,sun8i-h3-mdio-mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio-parent-bus = <&mdio>;
+				/* Only one MDIO is usable at the time */
+				internal_mdio: mdio@1 {
+					compatible = "allwinner,sun8i-h3-mdio-internal";
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					int_mii_phy: ethernet-phy@1 {
+						compatible = "ethernet-phy-ieee802.3-c22";
+						reg = <1>;
+						clocks = <&ccu CLK_BUS_EPHY>;
+						resets = <&ccu RST_BUS_EPHY>;
+					};
+				};
+
+				external_mdio: mdio@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		mbus: dram-controller@1c62000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c62000 0x1000>,
+			      <0x01c63000 0x1000>;
+			reg-names = "mbus", "dram";
+			clocks = <&ccu CLK_MBUS>,
+				 <&ccu CLK_DRAM>,
+				 <&ccu CLK_BUS_DRAM>;
+			clock-names = "mbus", "dram", "bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+			#interconnect-cells = <1>;
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c69000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01c21400 0x8>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 27>;
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi: camera@1cb0000 {
+			compatible = "allwinner,sun8i-h3-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_pins>;
+			status = "disabled";
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-h3-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-h3-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_PLL_VIDEO>;
+			clock-names = "bus", "mod", "pll-0";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		rtc: rtc@1f00000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01f00000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun8i-h3-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun8i-h3-r-ccu";
+			reg = <0x01f01400 0x100>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		codec_analog: codec-analog@1f015c0 {
+			compatible = "allwinner,sun8i-h3-codec-analog";
+			reg = <0x01f015c0 0x4>;
+		};
+
+		ir: ir@1f02000 {
+			compatible = "allwinner,sun6i-a31-ir";
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x400>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			clocks = <&r_ccu CLK_APB0_I2C>;
+			resets = <&r_ccu RST_APB0_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_uart: serial@1f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&r_ccu CLK_APB0_UART>;
+			resets = <&r_ccu RST_APB0_UART>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_uart_pins>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-h3-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL11";
+				function = "s_cir_rx";
+			};
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
+
+			r_pwm_pin: r-pwm-pin {
+				pins = "PL10";
+				function = "s_pwm";
+			};
+
+			r_uart_pins: r-uart-pins {
+				pins = "PL2", "PL3";
+				function = "s_uart";
+			};
+		};
+
+		r_pwm: pwm@1f03800 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01f03800 0x8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_pwm_pin>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi
new file mode 100644
index 0000000000000..0d002f83a259c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi
new file mode 100644
index 0000000000000..89731bb34c6b7
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "librecomputer:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+			wakeup-source;
+		};
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	/* VBUS on USB ports are always on */
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	usb3_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi
new file mode 100644
index 0000000000000..50d328c2a84da
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		/* This is simply a MOSFET switch */
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vcc_usbwifi: vcc-usbwifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-usbwifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&pio 6 4 GPIO_ACTIVE_HIGH>; /* PG4 */
+		enable-active-high;
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc_io>;
+	vcc-pc-supply = <&reg_vcc_io>;
+	vcc-pd-supply = <&reg_vcc_io>;
+	vcc-pe-supply = <&reg_vcc_io>;
+	vcc-pf-supply = <&reg_vcc_io>;
+	vcc-pg-supply = <&reg_vcc_io>;
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc_usbwifi>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi
new file mode 100644
index 0000000000000..117198c52e1f9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "sunxi-common-regulators.dtsi"
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts b/arch/arm/boot/dts/alphascale-asm9260-devkit.dts
deleted file mode 100644
index c77e2c902fb6f..0000000000000
--- a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
- *
- * Licensed under the X11 license or the GPL v2 (or later)
- */
-
-/dts-v1/;
-#include "alphascale-asm9260.dtsi"
-
-/ {
-	model = "Alphascale asm9260 Development Kit";
-	compatible = "alphascale,asm9260devkit", "alphascale,asm9260";
-};
diff --git a/arch/arm/boot/dts/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale-asm9260.dtsi
deleted file mode 100644
index 2ce6038536fda..0000000000000
--- a/arch/arm/boot/dts/alphascale-asm9260.dtsi
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
- *
- * Licensed under the X11 license or the GPL v2 (or later)
- */
-
-#include <dt-bindings/clock/alphascale,asm9260.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&icoll>;
-
-	memory {
-		device_type = "memory";
-		reg = <0x20000000 0x2000000>;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			clocks = <&acc CLKID_SYS_CPU>;
-		};
-	};
-
-	osc24m: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-accuracy = <30000>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		acc: clock-controller@80040000 {
-			compatible = "alphascale,asm9260-clock-controller";
-			#clock-cells = <1>;
-			clocks = <&osc24m>;
-			reg = <0x80040000 0x204>;
-		};
-
-		icoll: interrupt-controller@80054000 {
-			compatible = "alphascale,asm9260-icoll";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x80054000 0x200>;
-		};
-
-		timer0: timer@80088000 {
-			compatible = "alphascale,asm9260-timer";
-			reg = <0x80088000 0x4000>;
-			clocks = <&acc CLKID_AHB_TIMER0>;
-			interrupts = <29>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/alphascale/Makefile b/arch/arm/boot/dts/alphascale/Makefile
new file mode 100644
index 0000000000000..8d1314fc79d01
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
diff --git a/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts b/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts
new file mode 100644
index 0000000000000..c77e2c902fb6f
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "alphascale-asm9260.dtsi"
+
+/ {
+	model = "Alphascale asm9260 Development Kit";
+	compatible = "alphascale,asm9260devkit", "alphascale,asm9260";
+};
diff --git a/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi
new file mode 100644
index 0000000000000..2ce6038536fda
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&icoll>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x2000000>;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			clocks = <&acc CLKID_SYS_CPU>;
+		};
+	};
+
+	osc24m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-accuracy = <30000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		acc: clock-controller@80040000 {
+			compatible = "alphascale,asm9260-clock-controller";
+			#clock-cells = <1>;
+			clocks = <&osc24m>;
+			reg = <0x80040000 0x204>;
+		};
+
+		icoll: interrupt-controller@80054000 {
+			compatible = "alphascale,asm9260-icoll";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x80054000 0x200>;
+		};
+
+		timer0: timer@80088000 {
+			compatible = "alphascale,asm9260-timer";
+			reg = <0x80088000 0x4000>;
+			clocks = <&acc CLKID_AHB_TIMER0>;
+			interrupts = <29>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/alpine-db.dts b/arch/arm/boot/dts/alpine-db.dts
deleted file mode 100644
index dfb5a08022732..0000000000000
--- a/arch/arm/boot/dts/alpine-db.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright 2015 Annapurna Labs Ltd.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * Alternatively, redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following conditions
- * are met:
- *
- *   *   Redistributions of source code must retain the above copyright notice,
- *       this list of conditions and the following disclaimer.
- *
- *   *   Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- */
-
-/dts-v1/;
-
-#include "alpine.dtsi"
-
-/ {
-	model = "Annapurna Labs Alpine Dev Board";
-	/* no need for anything outside SOC */
-};
-
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi
deleted file mode 100644
index ff68dfb4eb787..0000000000000
--- a/arch/arm/boot/dts/alpine.dtsi
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Copyright 2015 Annapurna Labs Ltd.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * Alternatively, redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following conditions
- * are met:
- *
- *   *   Redistributions of source code must retain the above copyright notice,
- *       this list of conditions and the following disclaimer.
- *
- *   *   Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	/* SOC compatibility */
-	compatible = "al,alpine";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0 0 0>;
-	};
-
-	/* CPU Configuration */
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "al,alpine-smp";
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <1700000000>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-			clock-frequency = <1700000000>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <2>;
-			clock-frequency = <1700000000>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <3>;
-			clock-frequency = <1700000000>;
-		};
-	};
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		arch-timer {
-			compatible = "arm,cortex-a15-timer",
-				     "arm,armv7-timer";
-			interrupts =
-				<GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-			clock-frequency = <50000000>;
-		};
-
-		/* Interrupt Controller */
-		gic: interrupt-controller@fb001000 {
-			compatible = "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x0 0xfb001000 0x0 0x1000>,
-			      <0x0 0xfb002000 0x0 0x2000>,
-			      <0x0 0xfb004000 0x0 0x2000>,
-			      <0x0 0xfb006000 0x0 0x2000>;
-			interrupts =
-				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		/* CPU Resume registers */
-		cpu-resume@fbff5ec0 {
-			compatible = "al,alpine-cpu-resume";
-			reg = <0x0 0xfbff5ec0 0x0 0x30>;
-		};
-
-		/* North Bridge Service Registers */
-		sysfabric-service@fb070000 {
-			compatible = "al,alpine-sysfabric-service", "syscon";
-			reg = <0x0 0xfb070000 0x0 0x10000>;
-		};
-
-		/* Performance Monitor Unit */
-		pmu {
-			compatible = "arm,cortex-a15-pmu";
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		uart0: serial@fd883000 {
-			compatible = "ns16550a";
-			reg = <0x0 0xfd883000 0x0 0x1000>;
-			clock-frequency = <375000000>;
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		uart1: serial@fd884000 {
-			compatible = "ns16550a";
-			reg = <0x0 0xfd884000 0x0 0x1000>;
-			clock-frequency = <375000000>;
-			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		/* Internal PCIe Controller */
-		pcie@fbc00000 {
-			compatible = "pci-host-ecam-generic";
-			device_type = "pci";
-			#size-cells = <2>;
-			#address-cells = <3>;
-			#interrupt-cells = <1>;
-			reg = <0x0 0xfbc00000 0x0 0x100000>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			/* Add legacy interrupts for SATA devices only */
-			interrupt-map = <0x4000 0 0 1 &gic 0 43 4>,
-					<0x4800 0 0 1 &gic 0 44 4>;
-
-			/* 32 bit non prefetchable memory space */
-			ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
-
-			bus-range = <0x00 0x00>;
-			msi-parent = <&msix>;
-		};
-
-		msix: msix@fbe00000 {
-			compatible = "al,alpine-msix";
-			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
-			msi-controller;
-			al,msi-base-spi = <96>;
-			al,msi-num-spis = <64>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
deleted file mode 100644
index 75992eec830f6..0000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ /dev/null
@@ -1,227 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 2110";
-};
-
-&am33xx_pinmux {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-};
-
-&gpio0 {
-	gpio-line-names =
-		"MDIO",
-		"MDC",
-		"NC",
-		"NC",
-		"I2C1_SDA",
-		"I2C1_SCL",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"UART1_CTSN",
-		"UART1_RTSN",
-		"UART1_RX",
-		"UART1_TX",
-		"onrisc:blue:wlan",
-		"onrisc:green:app",
-		"USB0_DRVVBUS",
-		"ETH2_INT",
-		"NC",
-		"RMII1_TXD1",
-		"MMC1_DAT0",
-		"MMC1_DAT1",
-		"NC",
-		"NC",
-		"MMC1_DAT2",
-		"MMC1_DAT3",
-		"RMII1_TXD0",
-		"NC",
-		"GPMC_WAIT0",
-		"GPMC_WP_N";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"GPMC_AD0",
-		"GPMC_AD1",
-		"GPMC_AD2",
-		"GPMC_AD3",
-		"GPMC_AD4",
-		"GPMC_AD5",
-		"GPMC_AD6",
-		"GPMC_AD7",
-		"NC",
-		"NC",
-		"CONSOLE_RX",
-		"CONSOLE_TX",
-		"NC",
-		"NC",
-		"NC",
-		"SD_CD",
-		"RGMII2_TCTL",
-		"RGMII2_RCTL",
-		"RGMII2_TD3",
-		"RGMII2_TD2",
-		"RGMII2_TD1",
-		"RGMII2_TD0",
-		"RGMII2_TCLK",
-		"RGMII2_RCLK",
-		"RGMII2_RD3",
-		"RGMII2_RD2",
-		"RGMII2_RD1",
-		"RGMII2_RD0",
-		"PMIC_INT1",
-		"GPMC_CSN0_Flash",
-		"MMC1_CLK",
-		"MMC1_CMD";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"GPMC_CSN3_BUS",
-		"GPMC_CLK",
-		"GPMC_ADVN_ALE",
-		"GPMC_OEN_RE_N",
-		"GPMC_WE_N",
-		"GPMC_BEN0_CLE",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"SW2_0",
-		"SW2_1",
-		"RMII1_RXD1",
-		"RMII1_RXD0",
-		"UART1_DTR",
-		"UART1_DSR",
-		"UART1_DCD",
-		"UART1_RI",
-		"MMC0_DAT3",
-		"MMC0_DAT2",
-		"MMC0_DAT1",
-		"MMC0_DAT0",
-		"MMC0_CLK",
-		"MMC0_CMD";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"onrisc:red:power",
-		"RMII1_CRS_DV",
-		"RMII1_RXER",
-		"RMII1_TXEN",
-		"NC",
-		"NC",
-		"NC",
-		"WLAN_IRQ",
-		"WLAN_EN",
-		"SW2_2",
-		"SW2_3",
-		"NC",
-		"NC",
-		"NC",
-		"ModeA0",
-		"ModeA1",
-		"ModeA2",
-		"ModeA3",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC";
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
deleted file mode 100644
index 087e084506d25..0000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ /dev/null
@@ -1,273 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 3220";
-};
-
-&am33xx_pinmux {
-	tca6416_pins: pinmux_tca6416_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&i2c1 {
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tca6416_pins>;
-		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
-				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
-				  "ModeA0", "ModeA1", "ModeA2", "ModeA3",
-				  "ModeB0", "ModeB1", "ModeB2", "ModeB3";
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
-};
-
-&gpio0 {
-	gpio-line-names =
-		"MDIO",
-		"MDC",
-		"UART2_RX",
-		"UART2_TX",
-		"I2C1_SDA",
-		"I2C1_SCL",
-		"WLAN_BTN",
-		"W_DISABLE",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"UART1_CTSN",
-		"UART1_RTSN",
-		"UART1_RX",
-		"UART1_TX",
-		"onrisc:blue:wlan",
-		"onrisc:green:app",
-		"USB0_DRVVBUS",
-		"ETH2_INT",
-		"TCA6416_INT",
-		"RMII1_TXD1",
-		"MMC1_DAT0",
-		"MMC1_DAT1",
-		"NC",
-		"NC",
-		"MMC1_DAT2",
-		"MMC1_DAT3",
-		"RMII1_TXD0",
-		"NC",
-		"GPMC_WAIT0",
-		"GPMC_WP_N";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"GPMC_AD0",
-		"GPMC_AD1",
-		"GPMC_AD2",
-		"GPMC_AD3",
-		"GPMC_AD4",
-		"GPMC_AD5",
-		"GPMC_AD6",
-		"GPMC_AD7",
-		"NC",
-		"NC",
-		"CONSOLE_RX",
-		"CONSOLE_TX",
-		"UART2_DTR",
-		"UART2_DSR",
-		"UART2_DCD",
-		"UART2_RI",
-		"RGMII2_TCTL",
-		"RGMII2_RCTL",
-		"RGMII2_TD3",
-		"RGMII2_TD2",
-		"RGMII2_TD1",
-		"RGMII2_TD0",
-		"RGMII2_TCLK",
-		"RGMII2_RCLK",
-		"RGMII2_RD3",
-		"RGMII2_RD2",
-		"RGMII2_RD1",
-		"RGMII2_RD0",
-		"PMIC_INT1",
-		"GPMC_CSN0_Flash",
-		"MMC1_CLK",
-		"MMC1_CMD";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"GPMC_CSN3_BUS",
-		"GPMC_CLK",
-		"GPMC_ADVN_ALE",
-		"GPMC_OEN_RE_N",
-		"GPMC_WE_N",
-		"GPMC_BEN0_CLE",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"SD_CD",
-		"SD_WP",
-		"RMII1_RXD1",
-		"RMII1_RXD0",
-		"UART1_DTR",
-		"UART1_DSR",
-		"UART1_DCD",
-		"UART1_RI",
-		"MMC0_DAT3",
-		"MMC0_DAT2",
-		"MMC0_DAT1",
-		"MMC0_DAT0",
-		"MMC0_CLK",
-		"MMC0_CMD";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"onrisc:red:power",
-		"RMII1_CRS_DV",
-		"RMII1_RXER",
-		"RMII1_TXEN",
-		"3G_PWR_EN",
-		"UART2_CTSN",
-		"UART2_RTSN",
-		"WLAN_IRQ",
-		"WLAN_EN",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"USB1_DRVVBUS",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC";
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
deleted file mode 100644
index faeb39aab60a7..0000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ /dev/null
@@ -1,297 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 5221";
-};
-
-&am33xx_pinmux {
-	tca6416_pins: pinmux_tca6416_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
-		>;
-	};
-
-
-	dcan1_pins: pinmux_dcan1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&i2c1 {
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tca6416_pins>;
-		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
-				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
-				  "ModeA0", "ModeA1", "ModeA2", "ModeA3",
-				  "ModeB0", "ModeB1", "ModeB2", "ModeB3";
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
-};
-
-&gpio0 {
-	gpio-line-names =
-		"MDIO",
-		"MDC",
-		"UART2_RX",
-		"UART2_TX",
-		"I2C1_SDA",
-		"I2C1_SCL",
-		"WLAN_BTN",
-		"W_DISABLE",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"UART1_CTSN",
-		"UART1_RTSN",
-		"UART1_RX",
-		"UART1_TX",
-		"onrisc:blue:wlan",
-		"onrisc:green:app",
-		"USB0_DRVVBUS",
-		"ETH2_INT",
-		"TCA6416_INT",
-		"RMII1_TXD1",
-		"MMC1_DAT0",
-		"MMC1_DAT1",
-		"NC",
-		"NC",
-		"MMC1_DAT2",
-		"MMC1_DAT3",
-		"RMII1_TXD0",
-		"NC",
-		"GPMC_WAIT0",
-		"GPMC_WP_N";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"GPMC_AD0",
-		"GPMC_AD1",
-		"GPMC_AD2",
-		"GPMC_AD3",
-		"GPMC_AD4",
-		"GPMC_AD5",
-		"GPMC_AD6",
-		"GPMC_AD7",
-		"DCAN1_TX",
-		"DCAN1_RX",
-		"CONSOLE_RX",
-		"CONSOLE_TX",
-		"UART2_DTR",
-		"UART2_DSR",
-		"UART2_DCD",
-		"UART2_RI",
-		"RGMII2_TCTL",
-		"RGMII2_RCTL",
-		"RGMII2_TD3",
-		"RGMII2_TD2",
-		"RGMII2_TD1",
-		"RGMII2_TD0",
-		"RGMII2_TCLK",
-		"RGMII2_RCLK",
-		"RGMII2_RD3",
-		"RGMII2_RD2",
-		"RGMII2_RD1",
-		"RGMII2_RD0",
-		"PMIC_INT1",
-		"GPMC_CSN0_Flash",
-		"MMC1_CLK",
-		"MMC1_CMD";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"GPMC_CSN3_BUS",
-		"GPMC_CLK",
-		"GPMC_ADVN_ALE",
-		"GPMC_OEN_RE_N",
-		"GPMC_WE_N",
-		"GPMC_BEN0_CLE",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"SD_CD",
-		"SD_WP",
-		"RMII1_RXD1",
-		"RMII1_RXD0",
-		"UART1_DTR",
-		"UART1_DSR",
-		"UART1_DCD",
-		"UART1_RI",
-		"MMC0_DAT3",
-		"MMC0_DAT2",
-		"MMC0_DAT1",
-		"MMC0_DAT0",
-		"MMC0_CLK",
-		"MMC0_CMD";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"onrisc:red:power",
-		"RMII1_CRS_DV",
-		"RMII1_RXER",
-		"RMII1_TXEN",
-		"3G_PWR_EN",
-		"UART2_CTSN",
-		"UART2_RTSN",
-		"WLAN_IRQ",
-		"WLAN_EN",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"USB1_DRVVBUS",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC";
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
deleted file mode 100644
index 025014657d12a..0000000000000
--- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/*#include "am33xx.dtsi"*/
-
-/ {
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds>;
-
-		compatible = "gpio-leds";
-
-		led-power {
-			label = "onrisc:red:power";
-			linux,default-trigger = "default-on";
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		led-wlan {
-			label = "onrisc:blue:wlan";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-app {
-			label = "onrisc:green:app";
-			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	user_leds: pinmux_user_leds {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mii1_col.gpio3_0 PWR LED */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mii1_txd3.gpio0_16 WLAN LED */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mii1_txd2.gpio0_17 APP LED */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
deleted file mode 100644
index 6161c8929a781..0000000000000
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ /dev/null
@@ -1,401 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-#include "am33xx.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "vscom,onrisc", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	wl12xx_vmmc: fixedregulator2 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 8 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&am33xx_pinmux {
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLUP, MUX_MODE7)      /* emu0.gpio3[7] */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT_PULLUP, MUX_MODE7)      /* emu1.gpio3[8] */
-		>;
-	};
-
-	tps65910_pins: pinmux_tps65910_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE2)      /* spi0_d1.i2c1_sda_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE2)      /* spi0_cs0.i2c1_scl_mux3 */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
-
-
-			/* Slave 2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-
-			/* Slave 2 reset value*/
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)	/* mdio_data.mdio_data */
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	nandflash_pins_s0: nandflash_pins_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins_s0>;
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-	status = "okay";
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		nand-bus-width = <8>;
-		ti,nand-ecc-opt = "bch8";
-		ti,nand-xfer-type = "prefetch-dma";
-
-		gpmc,device-nand = "true";
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ti,elm-id = <&elm>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tps65910_pins>;
-	};
-
-	at24@50 {
-		compatible = "atmel,24c02";
-		pagesize = <8>;
-		reg = <0x50>;
-	};
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	ti,en-ck32k-xtal = <1>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1351500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	phy1: ethernet-phy@1 {
-		reg = <7>;
-		eee-broken-100tx;
-		eee-broken-1000t;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc_reg>;
-	status = "okay";
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&gpio0_target {
-	ti,no-reset-on-init;
-};
-
-&gpio3_target {
-	ti,no-reset-on-init;
-};
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
deleted file mode 100644
index 89c00ce42c261..0000000000000
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
- *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- */
-
-#include "am335x-igep0033.dtsi"
-
-/ {
-	model = "IGEP COM AM335x on AQUILA Expansion";
-	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
-
-	hdmi {
-		compatible = "ti,tilcdc,slave";
-		i2c = <&i2c0>;
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_pins>;
-		pinctrl-1 = <&nxp_hdmi_off_pins>;
-		status = "okay";
-	};
-
-	leds_base {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_base_pins>;
-
-		compatible = "gpio-leds";
-
-		led0 {
-			label = "base:red:user";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
-			default-state = "off";
-		};
-
-		led1 {
-			label = "base:green:user";
-			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-		>;
-	};
-
-	leds_base_pins: pinmux_leds_base_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
-		>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&i2c0 {
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
deleted file mode 100644
index 02e04a12a2703..0000000000000
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ /dev/null
@@ -1,411 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led2 {
-			label = "beaglebone:green:heartbeat";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led3 {
-			label = "beaglebone:green:mmc0";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led4 {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led5 {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin>;
-
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* spio0_cs1.gpio0_6 */
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	emmc_pins: pinmux_emmc_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "peripheral";
-	interrupts-extended = <&intc 18 &tps 0>;
-	interrupt-names = "mc", "vbus";
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	baseboard_eeprom: baseboard_eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		baseboard_data: baseboard_data@0 {
-			reg = <0 0x100>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	status = "okay";
-	clock-frequency = <100000>;
-
-	cape_eeprom0: cape_eeprom0@54 {
-		compatible = "atmel,24c256";
-		reg = <0x54>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cape0_data: cape_data@0 {
-			reg = <0 0x100>;
-		};
-	};
-
-	cape_eeprom1: cape_eeprom1@55 {
-		compatible = "atmel,24c256";
-		reg = <0x55>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cape1_data: cape_data@0 {
-			reg = <0 0x100>;
-		};
-	};
-
-	cape_eeprom2: cape_eeprom2@56 {
-		compatible = "atmel,24c256";
-		reg = <0x56>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cape2_data: cape_data@0 {
-			reg = <0 0x100>;
-		};
-	};
-
-	cape_eeprom3: cape_eeprom3@57 {
-		compatible = "atmel,24c256";
-		reg = <0x57>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cape3_data: cape_data@0 {
-			reg = <0 0x100>;
-		};
-	};
-};
-
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	/*
-	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
-	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
-	 * mode and risk hardware damage if this mode is entered.
-	 *
-	 * For details, see linux-omap mailing list May 2015 thread
-	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
-	 * In particular, messages:
-	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
-	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
-	 *
-	 * You can override this later with
-	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
-	 * if you want to use RTC-only mode and made sure you are not affected
-	 * by the hardware problems. (Tip: double-check by performing a current
-	 * measurement after shutdown: it should be less than 1 mA.)
-	 */
-
-	interrupts = <7>; /* NMI */
-	interrupt-parent = <&intc>;
-
-	ti,pmic-shutdown-controller;
-
-	charger {
-		status = "okay";
-	};
-
-	pwrbutton {
-		status = "okay";
-	};
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-name = "vdds_dpr";
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1351500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "vio,vrtc,vdds";
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "vdd_3v3aux";
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-name = "vdd_1v8";
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-name = "vdd_3v3a";
-			regulator-always-on;
-		};
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "mii";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	bus-width = <0x4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&aes {
-	status = "okay";
-};
-
-&sham {
-	status = "okay";
-};
-
-&rtc {
-	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-	clock-names = "ext-clk", "int-clk";
-	system-power-controller;
-};
-
-&pruss_tm {
-	status = "okay";
-};
-
-&wkup_m3_ipc {
-	firmware-name = "am335x-bone-scale-data.bin";
-};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
deleted file mode 100644
index b5d85ef51a021..0000000000000
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-
-/ {
-	model = "TI AM335x BeagleBone";
-	compatible = "ti,am335x-bone", "ti,am33xx";
-};
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-always-on;
-};
-
-&mmc1 {
-	vmmc-supply = <&ldo3_reg>;
-};
diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
deleted file mode 100644
index a7a8c61ef9b24..0000000000000
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	status = "okay";
-	non-removable;
-};
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi b/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi
deleted file mode 100644
index 486f24deb875c..0000000000000
--- a/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/display/tda998x.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-&am33xx_pinmux {
-	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-		>;
-	};
-
-	mcasp0_pins: mcasp0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
-		>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-
-	/* If you want to get 24 bit RGB and 16 BGR mode instead of
-	 * current 16 bit RGB and 24 BGR modes, set the propety
-	 * below to "crossed" and uncomment the video-ports -property
-	 * in tda19988 node.
-	 */
-	blue-and-red-wiring = "straight";
-
-	port {
-		lcdc_0: endpoint@0 {
-			remote-endpoint = <&hdmi_0>;
-		};
-	};
-};
-
-&i2c0 {
-	tda19988: tda19988@70 {
-		compatible = "nxp,tda998x";
-		reg = <0x70>;
-		nxp,calib-gpios = <&gpio1 25 0>;
-		interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
-		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-
-		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
-		/* video-ports = <0x234501>; */
-
-		#sound-dai-cells = <0>;
-		audio-ports = <	TDA998x_I2S	0x03>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				hdmi_0: endpoint {
-					remote-endpoint = <&lcdc_0>;
-				};
-			};
-		};
-	};
-};
-
-&mcasp0	{
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp0_pins>;
-	status = "okay";
-	op-mode = <0>;	/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 0
-		>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-/ {
-	clk_mcasp0_fixed: clk_mcasp0_fixed {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24576000>;
-	};
-
-	clk_mcasp0: clk_mcasp0 {
-		#clock-cells = <0>;
-		compatible = "gpio-gate-clock";
-		clocks = <&clk_mcasp0_fixed>;
-		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "TI BeagleBone Black";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink0_master>;
-		simple-audio-card,frame-master = <&dailink0_master>;
-
-		dailink0_master: simple-audio-card,cpu {
-			sound-dai = <&mcasp0>;
-			clocks = <&clk_mcasp0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&tda19988>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
deleted file mode 100644
index 207d2b63e0eb3..0000000000000
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-#include "am335x-boneblack-common.dtsi"
-#include "am335x-boneblack-hdmi.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM335x BeagleBone Black Wireless";
-	compatible = "ti,am335x-bone-black-wireless", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
-
-	wlan_en_reg: fixedregulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		startup-delay-us = <70000>;
-
-		/* WL_EN */
-		gpio = <&gpio3 9 0>;
-		enable-active-high;
-	};
-};
-
-&am33xx_pinmux {
-	bt_pins: pinmux_bt_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gmii1_txd0.gpio0_28 - BT_EN */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* mdio_data.uart3_ctsn */
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* mdio_clk.uart3_rtsn */
-		>;
-	};
-
-	wl18xx_pins: pinmux_wl18xx_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gmii1_txclk.gpio3_9 WL_EN */
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_refclk.gpio0_29 WL_IRQ */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gmii1_rxclk.gpio3_10 LS_BUF_EN */
-		>;
-	};
-};
-
-&mac_sw {
-	status = "disabled";
-};
-
-&mmc3 {
-	dmas = <&edma_xbar 12 0 1
-		&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-	status = "okay";
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	non-removable;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins &bt_pins>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "ti,wl1835-st";
-		enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&gpio3 {
-	ls-buf-en-hog {
-		gpio-hog;
-		gpios = <10 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LS_BUF_EN";
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
deleted file mode 100644
index b956e2f60fe07..0000000000000
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-#include "am335x-boneblack-common.dtsi"
-#include "am335x-boneblack-hdmi.dtsi"
-
-/ {
-	model = "TI AM335x BeagleBone Black";
-	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
-};
-
-&cpu0_opp_table {
-	/*
-	 * All PG 2.0 silicon may not support 1GHz but some of the early
-	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
-	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
-	 */
-	oppnitro-1000000000 {
-		opp-supported-hw = <0x06 0x0100>;
-	};
-};
-
-&gpio0 {
-	gpio-line-names =
-		"[mdio_data]",
-		"[mdio_clk]",
-		"P9_22 [spi0_sclk]",
-		"P9_21 [spi0_d0]",
-		"P9_18 [spi0_d1]",
-		"P9_17 [spi0_cs0]",
-		"[mmc0_cd]",
-		"P8_42A [ecappwm0]",
-		"P8_35 [lcd d12]",
-		"P8_33 [lcd d13]",
-		"P8_31 [lcd d14]",
-		"P8_32 [lcd d15]",
-		"P9_20 [i2c2_sda]",
-		"P9_19 [i2c2_scl]",
-		"P9_26 [uart1_rxd]",
-		"P9_24 [uart1_txd]",
-		"[rmii1_txd3]",
-		"[rmii1_txd2]",
-		"[usb0_drvvbus]",
-		"[hdmi cec]",
-		"P9_41B",
-		"[rmii1_txd1]",
-		"P8_19 [ehrpwm2a]",
-		"P8_13 [ehrpwm2b]",
-		"NC",
-		"NC",
-		"P8_14",
-		"P8_17",
-		"[rmii1_txd0]",
-		"[rmii1_refclk]",
-		"P9_11 [uart4_rxd]",
-		"P9_13 [uart4_txd]";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"P8_25 [mmc1_dat0]",
-		"[mmc1_dat1]",
-		"P8_5 [mmc1_dat2]",
-		"P8_6 [mmc1_dat3]",
-		"P8_23 [mmc1_dat4]",
-		"P8_22 [mmc1_dat5]",
-		"P8_3 [mmc1_dat6]",
-		"P8_4 [mmc1_dat7]",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"P8_12",
-		"P8_11",
-		"P8_16",
-		"P8_15",
-		"P9_15A",
-		"P9_23",
-		"P9_14 [ehrpwm1a]",
-		"P9_16 [ehrpwm1b]",
-		"[emmc rst]",
-		"[usr0 led]",
-		"[usr1 led]",
-		"[usr2 led]",
-		"[usr3 led]",
-		"[hdmi irq]",
-		"[usb vbus oc]",
-		"[hdmi audio]",
-		"P9_12",
-		"P8_26",
-		"P8_21 [emmc]",
-		"P8_20 [emmc]";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"P9_15B",
-		"P8_18",
-		"P8_7",
-		"P8_8",
-		"P8_10",
-		"P8_9",
-		"P8_45 [hdmi]",
-		"P8_46 [hdmi]",
-		"P8_43 [hdmi]",
-		"P8_44 [hdmi]",
-		"P8_41 [hdmi]",
-		"P8_42 [hdmi]",
-		"P8_39 [hdmi]",
-		"P8_40 [hdmi]",
-		"P8_37 [hdmi]",
-		"P8_38 [hdmi]",
-		"P8_36 [hdmi]",
-		"P8_34 [hdmi]",
-		"[rmii1_rxd3]",
-		"[rmii1_rxd2]",
-		"[rmii1_rxd1]",
-		"[rmii1_rxd0]",
-		"P8_27 [hdmi]",
-		"P8_29 [hdmi]",
-		"P8_28 [hdmi]",
-		"P8_30 [hdmi]",
-		"[mmc0_dat3]",
-		"[mmc0_dat2]",
-		"[mmc0_dat1]",
-		"[mmc0_dat0]",
-		"[mmc0_clk]",
-		"[mmc0_cmd]";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"[mii col]",
-		"[mii crs]",
-		"[mii rx err]",
-		"[mii tx en]",
-		"[mii rx dv]",
-		"[i2c0 sda]",
-		"[i2c0 scl]",
-		"[jtag emu0]",
-		"[jtag emu1]",
-		"[mii tx clk]",
-		"[mii rx clk]",
-		"NC",
-		"NC",
-		"[usb vbus en]",
-		"P9_31 [spi1_sclk]",
-		"P9_29 [spi1_d0]",
-		"P9_30 [spi1_d1]",
-		"P9_28 [spi1_cs0]",
-		"P9_42B [ecappwm0]",
-		"P9_27",
-		"P9_41A",
-		"P9_25",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC";
-};
-
-&baseboard_eeprom {
-	vcc-supply = <&ldo4_reg>;
-};
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
deleted file mode 100644
index 34579e98636e6..0000000000000
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ /dev/null
@@ -1,616 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-osd335x-common.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM335x BeagleBone Blue";
-	compatible = "ti,am335x-bone-blue", "ti,am33xx";
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		usr_0_led {
-			label = "beaglebone:green:usr0";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		usr_1_led {
-			label = "beaglebone:green:usr1";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		usr_2_led {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		usr_3_led {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-
-		wifi_led {
-			label = "wifi";
-			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "phy0assoc";
-		};
-
-		red_led {
-			label = "red";
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green_led {
-			label = "green";
-			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		batt_1_led {
-			label = "bat25";
-			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		batt_2_led {
-			label = "bat50";
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		batt_3_led {
-			label = "bat75";
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		batt_4_led {
-			label = "bat100";
-			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	wlan_en_reg: fixedregulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		startup-delay-us = <70000>;
-
-		/* WL_EN */
-		gpio = <&gpio3 9 0>;
-		enable-active-high;
-	};
-};
-
-&am33xx_pinmux {
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */
-
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
-		>;
-	};
-
-	/* UT0 */
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	/* UT1 */
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	/* GPS */
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* (A17) spi0_sclk.uart2_rxd */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (B17) spi0_d0.uart2_txd */
-		>;
-	};
-
-	/* DSM2 */
-	uart4_pins: pinmux_uart4_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
-		>;
-	};
-
-	/* UT5 */
-	uart5_pins: pinmux_uart5_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4)	/* (U2) lcd_data9.uart5_rxd */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT_PULLDOWN, MUX_MODE4)	/* (U1) lcd_data8.uart5_txd */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* (U9) gpmc_csn1.mmc1_clk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* (V9) gpmc_csn2.mmc1_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* (U7) gpmc_ad0.mmc1_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* (V7) gpmc_ad1.mmc1_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* (R8) gpmc_ad2.mmc1_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* (T8) gpmc_ad3.mmc1_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* (U8) gpmc_ad4.mmc1_dat4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* (V8) gpmc_ad5.mmc1_dat5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* (R9) gpmc_ad6.mmc1_dat6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* (T9) gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6)	/* (L15) gmii1_rxd1.mmc2_clk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6)	/* (J16) gmii1_txen.mmc2_cmd */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5)	/* (J17) gmii1_rxdv.mmc2_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5)	/* (J18) gmii1_txd3.mmc2_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5)	/* (K15) gmii1_txd2.mmc2_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5)	/* (H16) gmii1_col.mmc2_dat3 */
-		>;
-	};
-
-	bt_pins: pinmux_bt_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* (K17) gmii1_txd0.gpio0[28] - BT_EN */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* (L17) gmii1_rxd3.uart3_rxd */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (L16) gmii1_rxd2.uart3_txd */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* (M17) mdio_data.uart3_ctsn */
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* (M18) mdio_clk.uart3_rtsn */
-		>;
-	};
-
-	wl18xx_pins: pinmux_wl18xx_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* (K18) gmii1_txclk.gpio3[9] - WL_EN */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
-		>;
-	};
-
-	/* DCAN */
-	dcan1_pins: pinmux_dcan1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)		/* (E17) uart0_rtsn.dcan1_rx */
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)		/* (E18) uart0_ctsn.dcan1_tx */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7)		/* (M16) gmii1_rxd0.gpio2[21] */
-		>;
-	};
-
-	/* E1 */
-	eqep0_pins: pinmux_eqep0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE1)		/* (B12) mcasp0_aclkr.eQEP0A_in */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT, MUX_MODE1)		/* (C13) mcasp0_fsr.eQEP0B_in */
-		>;
-	};
-
-	/* E2 */
-	eqep1_pins: pinmux_eqep1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT, MUX_MODE2)		/* (V2) lcd_data12.eQEP1A_in */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_INPUT, MUX_MODE2)		/* (V3) lcd_data13.eQEP1B_in */
-		>;
-	};
-
-	/* E3 */
-	eqep2_pins: pinmux_eqep2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE4)		/* (T12) gpmc_ad12.eQEP2A_in */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE4)		/* (R12) gpmc_ad13.eQEP2B_in */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart5_pins>;
-
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "peripheral";
-	interrupts-extended = <&intc 18 &tps 0>;
-	interrupt-names = "mc", "vbus";
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&i2c0 {
-	baseboard_eeprom: baseboard_eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		baseboard_data: baseboard_data@0 {
-			reg = <0 0x100>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	mpu9250@68 {
-		compatible = "invensense,mpu9250";
-		reg = <0x68>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
-		i2c-gate {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ax8975@c {
-				compatible = "asahi-kasei,ak8975";
-				reg = <0x0c>;
-			};
-		};
-	};
-
-	pressure@76 {
-		compatible = "bosch,bmp280";
-		reg = <0x76>;
-	};
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	/delete-property/ ti,pmic-shutdown-controller;
-
-	charger {
-		interrupts = <0>, <1>;
-		interrupt-names = "USB", "AC";
-		status = "okay";
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-
-&mmc3 {
-	dmas = <&edma_xbar 12 0 1
-		&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-	status = "okay";
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	non-removable;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&tscadc {
-	status = "okay";
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6 7>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins &bt_pins>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "ti,wl1835-st";
-		enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&rtc {
-	system-power-controller;
-	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-	clock-names = "ext-clk", "int-clk";
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-	status = "okay";
-};
-
-&gpio0 {
-	gpio-line-names =
-		"UART3_CTS", /* M17 */
-		"UART3_RTS", /* M18 */
-		"UART2_RX", /* A17 */
-		"UART2_TX", /* B17 */
-		"I2C1_SDA", /* B16 */
-		"I2C1_SCL", /* A16 */
-		"MMC0_CD", /* C15 */
-		"SPI1_SS2", /* C18 */
-		"EQEP_1A", /* V2 */
-		"EQEP_1B", /* V3 */
-		"MDIR_2B", /* V4 */
-		"BATT_LED_2", /* T5 */
-		"I2C2_SDA", /* D18 */
-		"I2C2_SCL", /* D17 */
-		"UART1_RX", /* D16 */
-		"UART1_TX", /* D15 */
-		"MMC2_DAT1", /* J18 */
-		"MMC2_DAT2", /* K15 */
-		"NC", /* F16 */
-		"WIFI_LED", /* A15 */
-		"MOT_STBY", /* D14 */
-		"WLAN_IRQ", /* K16 */
-		"PWM_2A", /* U10 */
-		"PWM_2B", /* T10 */
-		"",
-		"",
-		"BATT_LED_4", /* T11 */
-		"BATT_LED_1", /* U12 */
-		"BT_EN", /* K17 */
-		"SPI1_SS1", /* H18 */
-		"UART4_RX", /* T17 */
-		"MDIR_1B"; /* U17 */
-};
-
-&gpio1 {
-	gpio-line-names =
-		"MMC1_DAT0", /* U7 */
-		"MMC1_DAT1", /* V7 */
-		"MMC1_DAT2", /* R8 */
-		"MMC1_DAT3", /* T8 */
-		"MMC1_DAT4", /* U8 */
-		"MMC1_DAT5", /* V8 */
-		"MMC1_DAT6", /* R9 */
-		"MMC1_DAT7", /* T9 */
-		"DCAN1_TX", /* E18 */
-		"DCAN1_RX", /* E17 */
-		"UART0_RX", /* E15 */
-		"UART0_TX", /* E16 */
-		"EQEP_2A", /* T12 */
-		"EQEP_2B", /* R12 */
-		"PRU_E_A", /* V13 */
-		"PRU_E_B", /* U13 */
-		"MDIR_2A", /* R13 */
-		"GPIO1_17", /* V14 */
-		"PWM_1A", /* U14 */
-		"PWM_1B", /* T14 */
-		"EMMC_RST", /* R14 */
-		"USR_LED_0", /* V15 */
-		"USR_LED_1", /* U15 */
-		"USR_LED_2", /* T15 */
-		"USR_LED_3", /* V16 */
-		"GPIO1_25", /* U16 */
-		"MCASP0_AXR0", /* T16 */
-		"MCASP0_AXR1", /* V17 */
-		"MCASP0_ACLKR", /* U18 */
-		"BATT_LED_3", /* V6 */
-		"MMC1_CLK", /* U9 */
-		"MMC1_CMD"; /* V9 */
-};
-
-&gpio2 {
-	gpio-line-names =
-		"MDIR_1A", /* T13 */
-		"MCASP0_FSR", /* V12 */
-		"LED_RED", /* R7 */
-		"LED_GREEN", /* T7 */
-		"MODE_BTN", /* U6 */
-		"PAUSE_BTN", /* T6 */
-		"MDIR_4A", /* R1 */
-		"MDIR_4B", /* R2 */
-		"MDIR_3B", /* R3 */
-		"MDIR_3A", /* R4 */
-		"SVO7", /* T1 */
-		"SVO8", /* T2 */
-		"SVO5", /* T3 */
-		"SVO6", /* T4 */
-		"UART5_TX", /* U1 */
-		"UART5_RX", /* U2 */
-		"SERVO_EN", /* U3 */
-		"NC", /* U4 */
-		"UART3_RX", /* L17 */
-		"UART3_TX", /* L16 */
-		"MMC2_CLK", /* L15 */
-		"DCAN1_SILENT", /* M16 */
-		"SVO1", /* U5 */
-		"SVO3", /* R5 */
-		"SVO2", /* V5 */
-		"SVO4", /* R6 */
-		"MMC0_DAT3", /* F17 */
-		"MMC0_DAT2", /* F18 */
-		"MMC0_DAT1", /* G15 */
-		"MMC0_DAT0", /* G16 */
-		"MMC0_CLK", /* G17 */
-		"MMC0_CMD"; /* G18 */
-};
-
-&gpio3 {
-	gpio-line-names =
-		"MMC2_DAT3", /* H16 */
-		"GPIO3_1", /* H17 */
-		"GPIO3_2", /* J15 */
-		"MMC2_CMD", /* J16 */
-		"MMC2_DAT0", /* J17 */
-		"I2C0_SDA", /* C17 */
-		"I2C0_SCL", /* C16 */
-		"EMU1", /* C14 */
-		"EMU0", /* B14 */
-		"WL_EN", /* K18 */
-		"WL_BT_OE", /* L18 */
-		"",
-		"",
-		"NC", /* F15 */
-		"SPI1_SCK", /* A13 */
-		"SPI1_MISO", /* B13 */
-		"SPI1_MOSI", /* D12 */
-		"GPIO3_17", /* C12 */
-		"EQEP_0A", /* B12 */
-		"EQEP_0B", /* C13 */
-		"GPIO3_20", /* D13 */
-		"IMU_INT", /* A14 */
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"";
-
-	ls-buf-en-hog {
-		gpio-hog;
-		gpios = <10 GPIO_ACTIVE_HIGH>;
-		output-high;
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&eqep0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&eqep0_pins>;
-	status = "okay";
-};
-
-&epwmss1 {
-	status = "okay";
-};
-
-&eqep1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&eqep1_pins>;
-	status = "okay";
-};
-
-&epwmss2 {
-	status = "okay";
-};
-
-&eqep2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&eqep2_pins>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
deleted file mode 100644
index 9f7fb63744d01..0000000000000
--- a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	uart2_pins: uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)	/* spi0_sclk.uart2_rxd */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)	/* spi0_d0.uart2_txd */
-		>;
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-&rtc {
-	system-power-controller;
-};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
deleted file mode 100644
index d388cffa1a4d6..0000000000000
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-#include "am335x-bonegreen-common.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM335x BeagleBone Green Wireless";
-	compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
-
-	wlan_en_reg: fixedregulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		startup-delay-us = <70000>;
-
-		/* WL_EN */
-		gpio = <&gpio0 26 0>;
-		enable-active-high;
-	};
-};
-
-&am33xx_pinmux {
-	bt_pins: pinmux_bt_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_ad12.gpio1_28 BT_EN */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad12.mmc2_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad13.mmc2_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad14.mmc2_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad15.mmc2_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc2_clk */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* mdio_data.uart3_ctsn */
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* mdio_clk.uart3_rtsn */
-		>;
-	};
-
-	wl18xx_pins: pinmux_wl18xx_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad10.gpio0_26 WL_EN */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad11.gpio0_27 WL_IRQ */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_csn0.gpio1_29 LS_BUF_EN */
-		>;
-	};
-};
-
-&mac_sw {
-	status = "disabled";
-};
-
-&mmc3 {
-	dmas = <&edma_xbar 12 0 1
-		&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-	status = "okay";
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	non-removable;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins &bt_pins>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "ti,wl1835-st";
-		enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&gpio1 {
-	ls-buf-en-hog {
-		gpio-hog;
-		gpios = <29 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LS_BUF_EN";
-	};
-};
-
-/* BT_AUD_OUT from wl1835 has to be pulled low when WL_EN is activated.*/
-/* in case it isn't, wilink8 ends up in one of the test modes that     */
-/* intruces various issues (elp wkaeup timeouts etc.)                  */
-/* On the BBGW this pin is routed through the level shifter (U21) that */
-/* introduces a pullup on the line and wilink8 ends up in a bad state. */
-/* use a gpio hog to force this pin low. An alternative may be adding  */
-/* an external pulldown on U21 pin 4.                                  */
-
-&gpio3 {
-	bt-aud-in-hog {
-		gpio-hog;
-		gpios = <16 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "MCASP0_AHCLKR";
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts
deleted file mode 100644
index 18cc0f49e999c..0000000000000
--- a/arch/arm/boot/dts/am335x-bonegreen.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-#include "am335x-bonegreen-common.dtsi"
-
-/ {
-	model = "TI AM335x BeagleBone Green";
-	compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
-};
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
deleted file mode 100644
index a223cdd3e30e8..0000000000000
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ /dev/null
@@ -1,186 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
- * Author: Rostislav Lisovy <lisovy@jablotron.cz>
- */
-/dts-v1/;
-#include "am335x-chilisom.dtsi"
-
-/ {
-	model = "AM335x Chiliboard";
-	compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
-		     "ti,am33xx";
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_gpio_pins>;
-
-		led0 {
-			label = "led0";
-			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* mdio_data.mdio_data */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			/* mdio_clk.mdio_clk */
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	usb1_drvvbus: usb1_drvvbus {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	sd_pins: pinmux_sd_card {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	led_gpio_pins: led_gpio_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_OUTPUT, MUX_MODE7) /* emu0.gpio3_7 */
-			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT, MUX_MODE7) /* emu1.gpio3_8 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&ldo4_reg {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-};
-
-/* Ethernet */
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
-
-/* USB */
-&usb1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_drvvbus>;
-	dr_mode = "host";
-};
-
-/* microSD */
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd_pins>;
-	vmmc-supply = <&ldo4_reg>;
-	bus-width = <0x4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&tps {
-	interrupt-parent = <&intc>;
-	interrupts = <7>; /* NNMI */
-
-	charger {
-		status = "okay";
-	};
-
-	pwrbutton {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
deleted file mode 100644
index 43b61e43ed1ee..0000000000000
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
- * Author: Rostislav Lisovy <lisovy@jablotron.cz>
- */
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Grinn AM335x ChiliSOM";
-	compatible = "grinn,am335x-chilisom", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	nandflash_pins: nandflash_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE0)
-
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-name = "vdds_dpr";
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "vio,vrtc,vdds";
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "vdd_3v3aux";
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-name = "vdd_1v8";
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-name = "vdd_3v3d";
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
-
-&rtc {
-	system-power-controller;
-
-	pinctrl-0 = <&ext_wakeup>;
-	pinctrl-names = "default";
-
-	ext_wakeup: ext-wakeup {
-		pins = "ext_wakeup0";
-		input-enable;
-	};
-};
-
-/* NAND Flash */
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-	ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
deleted file mode 100644
index 993b134206996..0000000000000
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ /dev/null
@@ -1,516 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
- *
- * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "CompuLab CM-T335";
-	compatible = "compulab,cm-t335", "ti,am33xx";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>;	/* 128 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_led_pins>;
-		led0 {
-			label = "cm_t335:green";
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;	/* gpio2_0 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	/* regulator for mmc */
-	vmmc_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	/* Regulator for WiFi */
-	vwlan_fixed: fixedregulator2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vwlan_fixed";
-		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
-		enable-active-high;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 0>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "cm-t335";
-
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Line", "Line In",
-			"Headphone", "Headphone Jack";
-
-		simple-audio-card,routing =
-			"Headphone Jack", "LHPOUT",
-			"Headphone Jack", "RHPOUT",
-			"LLINEIN", "Line In",
-			"RLINEIN", "Line In",
-			"MICIN", "Mic Jack";
-
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_master>;
-		simple-audio-card,frame-master = <&sound_master>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp1>;
-		};
-
-		sound_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic23>;
-			system-clock-frequency = <12000000>;
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&bluetooth_pins>;
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			/* uart0_ctsn.i2c1_sda */
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE2)
-			/* uart0_rtsn.i2c1_scl */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)
-		>;
-	};
-
-	gpio_led_pins: pinmux_gpio_led_pins {
-		pinctrl-single,pins = <
-			/* gpmc_csn3.gpio2_0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE7)
-		>;
-	};
-
-	nandflash_pins: pinmux_nandflash_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			/* gpmc_wpn.gpio0_31 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	dcan0_pins: pinmux_dcan0_pins {
-		pinctrl-single,pins = <
-			/* uart1_ctsn.dcan0_tx */
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2)
-			/* uart1_rtsn.dcan0_rx */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2)
-		>;
-	};
-
-	dcan1_pins: pinmux_dcan1_pins {
-		pinctrl-single,pins = <
-			/* uart1_rxd.dcan1_tx */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT, MUX_MODE2)
-			/* uart1_txd.dcan1_rx */
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE2)
-		>;
-	};
-
-	ecap0_pins: pinmux_ecap0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0)
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			/* mii1_tx_en.rgmii1_tctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
-			/* mii1_rxdv.rgmii1_rctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)
-			/* mii1_txd3.rgmii1_td3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
-			/* mii1_txd2.rgmii1_td2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
-			/* mii1_txd1.rgmii1_td1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
-			/* mii1_txd0.rgmii1_td0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
-			/* mii1_txclk.rgmii1_tclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
-			/* mii1_rxclk.rgmii1_rclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
-			/* mii1_rxd3.rgmii1_rd3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
-			/* mii1_rxd2.rgmii1_rd2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
-			/* mii1_rxd1.rgmii1_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
-			/* mii1_rxd0.rgmii1_rd0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	spi0_pins: pinmux_spi0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	/* wl1271 bluetooth */
-	bluetooth_pins: pinmux_bluetooth_pins {
-		pinctrl-single,pins = <
-			/* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLUP, MUX_MODE7)
-		>;
-	};
-
-	/* TLV320AIC23B codec */
-	mcasp1_pins: pinmux_mcasp1_pins {
-		pinctrl-single,pins = <
-			/* MII1_CRS.mcasp1_aclkx */
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4)
-			/* MII1_RX_ER.mcasp1_fsx */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4)
-			/* MII1_COL.mcasp1_axr2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE4)
-			/* RMII1_REF_CLK.mcasp1_axr3 */
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4)
-		>;
-	};
-
-	/* wl1271 WiFi */
-	wifi_pins: pinmux_wifi_pins {
-		pinctrl-single,pins = <
-			/* EMU1.gpio3_8 - WiFi IRQ */
-			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7)
-			/* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7)
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-/* WLS1271 bluetooth */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-
-status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-	/* CM-T335 board EEPROM */
-	eeprom: 24c02@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-	/* Real Time Clock */
-	ext_rtc: em3027@56 {
-		compatible = "emmicro,em3027";
-		reg = <0x56>;
-	};
-	/* Audio codec */
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-		#sound-dai-cells = <0>;
-		status = "okay";
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-
-	ecap0: pwm@100 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap0_pins>;
-	};
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "spl";
-			reg = <0x00000000 0x00200000>;
-		};
-		partition@1 {
-			label = "uboot";
-			reg = <0x00200000 0x00100000>;
-		};
-		partition@2 {
-			label = "uboot environment";
-			reg = <0x00300000 0x00100000>;
-		};
-		partition@3 {
-			label = "dtb";
-			reg = <0x00400000 0x00100000>;
-		};
-		partition@4 {
-			label = "splash";
-			reg = <0x00500000 0x00400000>;
-		};
-		partition@5 {
-			label = "linux";
-			reg = <0x00900000 0x00600000>;
-		};
-		partition@6 {
-			label = "rootfs";
-			reg = <0x00F00000 0>;
-		};
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-
-&dcan0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan0_pins>;
-};
-
-&dcan1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-};
-
-/* Touschscreen and analog digital converter */
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x01 0x10 0x23 0x32>;
-		ti,charge-delay = <0x400>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-/* CPU audio */
-&mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcasp1_pins>;
-
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 16 serializers */
-		num-serializer = <16>;
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
-		>;
-		tx-num-evt = <1>;
-		rx-num-evt = <1>;
-
-		#sound-dai-cells = <0>;
-		status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	ti,pindir-d0-out-d1-in;
-	/* WLS1271 WiFi */
-	wlcore: wlcore@1 {
-		compatible = "ti,wl1271";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_pins>;
-		reg = <1>;
-		spi-max-frequency = <48000000>;
-		clock-xtal;
-		ref-clock-frequency = <38400000>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		vwlan-supply = <&vwlan_fixed>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
deleted file mode 100644
index 5beabaa5ff6a1..0000000000000
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ /dev/null
@@ -1,786 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM335x EVM";
-	compatible = "ti,am335x-evm", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lis3_reg: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lis3_reg";
-		regulator-boot-on;
-	};
-
-	wlan_en_reg: fixedregulator2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		/* WLAN_EN GPIO for this board - Bank1, pin16 */
-		gpio = <&gpio1 16 0>;
-
-		/* WLAN card specific delay */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	/* TPS79501 */
-	v1_8d_reg: fixedregulator-v1_8d {
-		compatible = "regulator-fixed";
-		regulator-name = "v1_8d";
-		vin-supply = <&vbat>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	/* TPS79501 */
-	v3_3d_reg: fixedregulator-v3_3d {
-		compatible = "regulator-fixed";
-		regulator-name = "v3_3d";
-		vin-supply = <&vbat>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	matrix_keypad: matrix_keypad0 {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH		/* Bank1, pin25 */
-			     &gpio1 26 GPIO_ACTIVE_HIGH		/* Bank1, pin26 */
-			     &gpio1 27 GPIO_ACTIVE_HIGH>;	/* Bank1, pin27 */
-
-		col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH		/* Bank1, pin21 */
-			     &gpio1 22 GPIO_ACTIVE_HIGH>;	/* Bank1, pin22 */
-
-		linux,keymap = <0x0000008b	/* MENU */
-				0x0100009e	/* BACK */
-				0x02000069	/* LEFT */
-				0x0001006a	/* RIGHT */
-				0x0101001c	/* ENTER */
-				0x0201006c>;	/* DOWN */
-	};
-
-	gpio_keys: volume-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		switch-9 {
-			label = "volume-up";
-			linux,code = <115>;
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-
-		switch-10 {
-			label = "volume-down";
-			linux,code = <114>;
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 0>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	panel {
-		compatible = "tfc,s9700rtwv43tr-01b";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins_s0>;
-		backlight = <&backlight>;
-
-		port {
-			panel_0: endpoint {
-				remote-endpoint = <&lcdc_0>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "AM335x-EVM";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Headphone Jack",	"HPLOUT",
-			"Headphone Jack",	"HPROUT",
-			"LINE1L",		"Line In",
-			"LINE1R",		"Line In";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound_master>;
-		simple-audio-card,frame-master = <&sound_master>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp1>;
-		};
-
-		sound_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			system-clock-frequency = <12000000>;
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
-
-	matrix_keypad_s0: matrix_keypad_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-		>;
-	};
-
-	volume_keys_s0: volume_keys_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* spi0_d0.gpio0_3 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_d1.i2c1_sda */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_cs0.i2c1_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	nandflash_pins_s0: nandflash_pins_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0)
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* spi0_cs1.gpio0_6 */
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4)		/* mcasp0_aclkr.mmc0_sdwp */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
-		>;
-	};
-
-	wlan_pins: pinmux_wlan_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a0.gpio1_16 */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT, MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
-		>;
-	};
-
-	lcd_pins_s0: lcd_pins_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	mcasp1_pins: mcasp1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-
-	mcasp1_pins_sleep: mcasp1_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	dcan1_pins_default: dcan1_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <100000>;
-
-	lis331dlh: lis331dlh@18 {
-		compatible = "st,lis331dlh", "st,lis3lv02d";
-		reg = <0x18>;
-		Vdd-supply = <&lis3_reg>;
-		Vdd_IO-supply = <&lis3_reg>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-
-	tsl2550: tsl2550@39 {
-		compatible = "taos,tsl2550";
-		reg = <0x39>;
-	};
-
-	tmp275: tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&v3_3d_reg>;
-		IOVDD-supply = <&v3_3d_reg>;
-		DRVDD-supply = <&v3_3d_reg>;
-		DVDD-supply = <&v1_8d_reg>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-
-	blue-and-red-wiring = "crossed";
-
-	port {
-		lcdc_0: endpoint@0 {
-			remote-endpoint = <&panel_0>;
-		};
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&epwmss0 {
-	status = "okay";
-
-	ecap0: pwm@100 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap0_pins>;
-	};
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins_s0>;
-	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		ti,nand-xfer-type = "prefetch-dma";
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x00020000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00020000 0x00020000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00040000 0x00020000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x00060000 0x00020000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x000C0000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x001C0000 0x00020000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x001E0000 0x00020000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00200000 0x00800000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00A00000 0x0F600000>;
-		};
-	};
-};
-
-#include "tps65910.dtsi"
-
-&mcasp1 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp1_pins>;
-	pinctrl-1 = <&mcasp1_pins_sleep>;
-
-	status = "okay";
-
-	op-mode = <0>;          /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializers */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		0 0 1 2
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1351500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	 status = "disabled";
-};
-
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-		ti,charge-delay = <0x400>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&mmc3 {
-	/* these are on the crossbar and are outlined in the
-	   xbar-event-map element */
-	dmas = <&edma_xbar 12 0 1
-		&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-	status = "okay";
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &wlan_pins>;
-	non-removable;
-	cap-power-off-card;
-	keep-power-in-suspend;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@0 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&dcan1 {
-	status = "disabled";	/* Enable only if Profile 1 is selected */
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins_default>;
-};
-
-&rtc {
-	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-	clock-names = "ext-clk", "int-clk";
-};
-
-&pruss_tm {
-	status = "okay";
-};
-
-&wkup_m3_ipc {
-	firmware-name = "am335x-evm-scale-data.bin";
-};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
deleted file mode 100644
index 5b3278c0c46a5..0000000000000
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ /dev/null
@@ -1,725 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * AM335x Starter Kit
- * http://www.ti.com/tool/tmdssk3358
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM335x EVM-SK";
-	compatible = "ti,am335x-evmsk", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lis3_reg: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lis3_reg";
-		regulator-boot-on;
-	};
-
-	wl12xx_vmmc: fixedregulator2 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 29 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	vtt_fixed: fixedregulator3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-	};
-
-	/* TPS79518 */
-	v1_8d_reg: fixedregulator-v1_8d {
-		compatible = "regulator-fixed";
-		regulator-name = "v1_8d";
-		vin-supply = <&vbat>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	/* TPS78633 */
-	v3_3d_reg: fixedregulator-v3_3d {
-		compatible = "regulator-fixed";
-		regulator-name = "v3_3d";
-		vin-supply = <&vbat>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "evmsk:green:usr0";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "evmsk:green:usr1";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "evmsk:green:mmc0";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led4 {
-			label = "evmsk:green:heartbeat";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	gpio_buttons: gpio_buttons0 {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch1 {
-			label = "button0";
-			linux,code = <0x100>;
-			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		switch2 {
-			label = "button1";
-			linux,code = <0x101>;
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		switch3 {
-			label = "button2";
-			linux,code = <0x102>;
-			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-			wakeup-source;
-		};
-
-		switch4 {
-			label = "button3";
-			linux,code = <0x103>;
-			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	lcd_bl: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 58 61 66 75 90 125 170 255>;
-		default-brightness-level = <8>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "AM335x-EVMSK";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Headphone Jack",	"HPLOUT",
-			"Headphone Jack",	"HPROUT";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound_master>;
-		simple-audio-card,frame-master = <&sound_master>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp1>;
-		};
-
-		sound_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			system-clock-frequency = <24000000>;
-		};
-	};
-
-	panel {
-		compatible = "newhaven,nhd-4.3-480272ef-atxl";
-
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&lcd_pins_default>;
-		pinctrl-1 = <&lcd_pins_sleep>;
-		backlight = <&lcd_bl>;
-
-		port {
-			panel_0: endpoint {
-				remote-endpoint = <&lcdc_0>;
-			};
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
-
-	lcd_pins_default: lcd_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	lcd_pins_sleep: lcd_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
-		>;
-	};
-
-	gpio_keys_s0: gpio_keys_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	ecap2_pins: backlight_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, 0x0, MUX_MODE4)	/* mcasp0_ahclkr.ecap2_in_pwm2_out */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-
-			/* Slave 2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-
-			/* Slave 2 reset value*/
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) 		/* spi0_cs1.gpio0_6 */
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4)		/* mcasp0_aclkr.mmc0_sdwp */
-		>;
-	};
-
-	mcasp1_pins: mcasp1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-
-	mcasp1_pins_sleep: mcasp1_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_csn0.gpio1_29 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-
-	lis331dlh: lis331dlh@18 {
-		compatible = "st,lis331dlh", "st,lis3lv02d";
-		reg = <0x18>;
-		Vdd-supply = <&lis3_reg>;
-		Vdd_IO-supply = <&lis3_reg>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&v3_3d_reg>;
-		IOVDD-supply = <&v3_3d_reg>;
-		DRVDD-supply = <&v3_3d_reg>;
-		DVDD-supply = <&v1_8d_reg>;
-	};
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&epwmss2 {
-	status = "okay";
-
-	ecap2: pwm@100 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap2_pins>;
-	};
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1351500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&gpio0_target {
-	ti,no-reset-on-init;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <31 IRQ_TYPE_EDGE_RISING>; /* gpio 31 */
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&mcasp1 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp1_pins>;
-	pinctrl-1 = <&mcasp1_pins_sleep>;
-
-	status = "okay";
-
-	op-mode = <0>;          /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializers */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		0 0 1 2
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-
-	blue-and-red-wiring = "crossed";
-
-	port {
-		lcdc_0: endpoint@0 {
-			remote-endpoint = <&panel_0>;
-		};
-	};
-};
-
-&rtc {
-	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-	clock-names = "ext-clk", "int-clk";
-};
-
-&pruss_tm {
-	status = "okay";
-};
-
-&wkup_m3_ipc {
-	firmware-name = "am335x-evm-scale-data.bin";
-};
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
deleted file mode 100644
index b357364e93f99..0000000000000
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ /dev/null
@@ -1,745 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (C) 2018 Robert Bosch Power Tools GmbH
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Bosch AM335x Guardian";
-	compatible = "bosch,am335x-guardian", "ti,am33xx";
-
-	chosen {
-		stdout-path = &uart0;
-		tick-timer = &timer2;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	guardian_buttons: gpio-keys {
-		pinctrl-names = "default";
-		pinctrl-0 = <&guardian_button_pins>;
-		compatible = "gpio-keys";
-
-		select-button {
-			label = "guardian-select-button";
-			linux,code = <KEY_5>;
-			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-
-		power-button {
-			label = "guardian-power-button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-	};
-
-	guardian_leds: gpio-leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&guardian_led_pins>;
-		compatible = "gpio-leds";
-
-		life-led {
-			label = "guardian:life-led";
-			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
-		pinctrl-1 = <&lcd_pins_sleep>;
-
-		display-timings {
-			320x240 {
-				hactive         = <320>;
-				vactive         = <240>;
-				hback-porch     = <68>;
-				hfront-porch    = <20>;
-				hsync-len       = <1>;
-				vback-porch     = <18>;
-				vfront-porch    = <4>;
-				vsync-len       = <1>;
-				clock-frequency = <9000000>;
-				hsync-active    = <0>;
-				vsync-active    = <0>;
-			};
-		};
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <24>;
-			bus-width         = <16>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-
-	};
-
-	guardian_beeper: pwm-7 {
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer7>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&guardian_beeper_pins>;
-		ti,clock-source = <0x01>;
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	mt_keypad: mt_keypad@0 {
-		compatible = "gpio-mt-keypad";
-		debounce-delay-ms = <10>;
-		col-scan-delay-us = <2>;
-		keypad,num-lines = <5>;
-		linux,no-autorepeat;
-		gpio-activelow;
-		line-gpios = <
-			&gpio1 24 GPIO_ACTIVE_LOW    /*gpio_56*/
-			&gpio1 23 GPIO_ACTIVE_LOW    /*gpio_55*/
-			&gpio1 22 GPIO_ACTIVE_LOW    /*gpio_54*/
-			&gpio1 20 GPIO_ACTIVE_LOW    /*gpio_52*/
-			&gpio1 16 GPIO_ACTIVE_LOW    /*gpio_48*/
-		>;
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-	ranges = <0 0 0x08000000 0x1000000>;  /* CS0: 16MB for NAND */
-	status = "okay";
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>; /* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		ti,nand-xfer-type = "prefetch-dma";
-		ti,nand-ecc-opt = "bch16";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <30>;
-		gpmc,cs-wr-off-ns = <30>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <30>;
-		gpmc,adv-wr-off-ns = <30>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <15>;
-		gpmc,oe-on-ns = <1>;
-		gpmc,oe-off-ns = <15>;
-		gpmc,access-ns = <30>;
-		gpmc,rd-cycle-ns = <30>;
-		gpmc,wr-cycle-ns = <30>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		/*
-		 * MTD partition table
-		 *
-		 * All SPL-* partitions are sized to minimal length which can
-		 * be independently programmable. For NAND flash this is equal
-		 * to size of erase-block.
-		 */
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "SPL";
-			reg = <0x0 0x40000>;
-		};
-
-		partition@1 {
-			label = "SPL.backup1";
-			reg = <0x40000  0x40000>;
-		};
-
-		partition@2 {
-			label = "SPL.backup2";
-			reg = <0x80000  0x40000>;
-		};
-
-		partition@3 {
-			label = "SPL.backup3";
-			reg = <0xc0000  0x40000>;
-		};
-
-		partition@4 {
-			label = "u-boot";
-			reg = <0x100000 0x100000>;
-		};
-
-		partition@5 {
-			label = "u-boot.backup1";
-			reg = <0x200000 0x100000>;
-		};
-
-		partition@6 {
-			label = "u-boot-2";
-			reg = <0x300000 0x100000>;
-		};
-
-		partition@7 {
-			label = "u-boot-2.backup1";
-			reg = <0x400000 0x100000>;
-		};
-
-		partition@8 {
-			label = "u-boot-env";
-			reg = <0x500000 0x40000>;
-		};
-
-		partition@9 {
-			label = "u-boot-env.backup1";
-			reg = <0x540000 0x40000>;
-		};
-
-		partition@10 {
-			label = "splash-screen";
-			reg = <0x580000 0x40000>;
-		};
-
-		partition@11 {
-			label = "UBI";
-			reg = <0x5c0000 0x1fa40000>;
-		};
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-};
-
-&lcdc {
-	blue-and-red-wiring = "crossed";
-	status = "okay";
-	port {
-		lcdc_0: endpoint@0 {
-			remote-endpoint = <0>;
-		};
-	};
-};
-
-&mmc1 {
-	bus-width = <0x4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	status = "okay";
-};
-
-&rtc {
-	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-	clock-names = "ext-clk", "int-clk";
-};
-
-&spi0 {
-	ti,pindir-d0-out-d1-in;
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	status = "okay";
-};
-
-#include "tps65217.dtsi"
-
-&tps {
-  /*
-   * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
-   * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
-   * mode and risk hardware damage if this mode is entered.
-   *
-   * For details, see linux-omap mailing list May 2015 thread
-   *  [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
-   * In particular, messages:
-   *  http://www.spinics.net/lists/linux-omap/msg118585.html
-   *  http://www.spinics.net/lists/linux-omap/msg118615.html
-   *
-   * You can override this later with
-   *  &tps {  /delete-property/ ti,pmic-shutdown-controller;  }
-   * if you want to use RTC-only mode and made sure you are not affected
-   * by the hardware problems. (Tip: double-check by performing a current
-   * measurement after shutdown: it should be less than 1 mA.)
-   */
-	ti,pmic-shutdown-controller;
-	interrupt-parent = <&intc>;
-	interrupts = <7>; /* NMI */
-
-	backlight {
-		isel = <1>;  /* 1 - ISET1, 2 ISET2 */
-		fdim = <500>; /* TPS65217_BL_FDIM_500HZ */
-		default-brightness = <50>;
-		/* 1(on) - enable current sink, while initialization */
-		/* 0(off) - disable current sink, while initialization */
-		isink-en = <1>;
-	};
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-name = "vdds_dpr";
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1351500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "vio,vrtc,vdds";
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "vdd_3v3aux";
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-name = "vdd_1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-name = "vdd_3v3a";
-			regulator-always-on;
-		};
-	};
-};
-
-&tscadc {
-	status = "okay";
-
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6>;
-	};
-};
-
-&gpio0 {
-	gpio-line-names =
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"MirxWakeup",
-		"",
-		"";
-};
-
-&gpio3 {
-	ti,gpio-always-on;
-	ti,no-reset-on-init;
-	gpio-line-names =
-		"",
-		"MirxBtReset",
-		"",
-		"CcVolAdcEn",
-		"MirxBlePause",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"AspEn",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"BatVolAdcEn",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"",
-		"";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "peripheral";
-};
-
-&usb1 {
-	dr_mode = "host";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin &guardian_interface_pins>;
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			/* xdma_event_intr1.clkout2 */
-			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
-		>;
-	};
-
-	guardian_interface_pins: pinmux_interface_pins {
-		pinctrl-single,pins = <
-			/* ADC_BATSENSE_EN */
-			/* (A14) MCASP0_AHCLKx.gpio3[21] */
-			AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
-			/* ADC_COINCELL_EN */
-			/* (J16) MII1_TX_EN.gpio3[3] */
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
-			/* ASP_ENABLE */
-			/* (A13) MCASP0_ACLKx.gpio3[14] */
-			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP | MUX_MODE7)
-			/* (D16) uart1_rxd.uart1_rxd */
-			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE7)
-			/* (D15) uart1_txd.uart1_txd */
-			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE7)
-			/*SWITCH-OFF_3V6*/
-			/* (M18) gpio0[1] */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE7)
-			/* MIRACULIX */
-			/* (H17) gmii1_crs.gpio3[1] */
-			AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
-			/* (H18) rmii1_refclk.gpio0[29] */
-			AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
-			/* (J18) gmii1_txd3.gpio0[16] */
-			AM33XX_IOPAD(0x91c, PIN_INPUT           | MUX_MODE7 )
-			/* (J17) gmii1_rxdv.gpio3[4] */
-			AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
-		>;
-	};
-
-	guardian_beeper_pins: pinmux_dmtimer7_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */
-		>;
-	};
-
-	guardian_button_pins: pinmux_guardian_button_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */
-			AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9)  gpmc_csn2.gpio1[31] */
-		>;
-	};
-
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	led_bl_pins: gpio_led_bl_pins {
-		pinctrl-single,pins = <
-			/* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */
-			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
-		>;
-	};
-
-	lcd_disen_pins: pinmux_lcd_disen_pins {
-		pinctrl-single,pins = <
-			/* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */
-			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
-		>;
-	};
-
-	lcd_pins_default: pinmux_lcd_pins_default {
-		pinctrl-single,pins = <
-			/* (U10) gpmc_ad8.lcd_data23 */
-			AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			/* (T10) gpmc_ad9.lcd_data22 */
-			AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			/* (T11) gpmc_ad10.lcd_data21 */
-			AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			/* (U12) gpmc_ad11.lcd_data20 */
-			AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			/* (T12) gpmc_ad12.lcd_data19 */
-			AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			/* (R12) gpmc_ad13.lcd_data18 */
-			AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			/* (V13) gpmc_ad14.lcd_data17 */
-			AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			/* (U13) gpmc_ad15.lcd_data16 */
-			AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			/* lcd_data0.lcd_data0 */
-			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data1.lcd_data1 */
-			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data2.lcd_data2 */
-			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data3.lcd_data3 */
-			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data4.lcd_data4 */
-			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data5.lcd_data5 */
-			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data6.lcd_data6 */
-			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data7.lcd_data7 */
-			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data8.lcd_data8 */
-			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data9.lcd_data9 */
-			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data10.lcd_data10 */
-			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data11.lcd_data11 */
-			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data12.lcd_data12 */
-			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data13.lcd_data13 */
-			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data14.lcd_data14 */
-			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_data15.lcd_data15 */
-			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_vsync.lcd_vsync */
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_hsync.lcd_hsync */
-			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_pclk.lcd_pclk */
-			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			/* lcd_ac_bias_en.lcd_ac_bias_en */
-			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-		>;
-	};
-
-	lcd_pins_sleep: pinmux_lcd_pins_sleep {
-		pinctrl-single,pins = <
-			/* lcd_data0.lcd_data0 */
-			AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data1.lcd_data1 */
-			AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data2.lcd_data2 */
-			AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data3.lcd_data3 */
-			AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data4.lcd_data4 */
-			AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data5.lcd_data5 */
-			AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data6.lcd_data6 */
-			AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data7.lcd_data7 */
-			AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data8.lcd_data8 */
-			AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data9.lcd_data9 */
-			AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data10.lcd_data10 */
-			AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data11.lcd_data11 */
-			AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data12.lcd_data12 */
-			AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data13.lcd_data13 */
-			AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data14.lcd_data14 */
-			AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_data15.lcd_data15 */
-			AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_vsync.lcd_vsync */
-			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_hsync.lcd_hsync */
-			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_pclk.lcd_pclk */
-			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
-			/* lcd_ac_bias_en.lcd_ac_bias_en */
-			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
-		>;
-	};
-
-	guardian_led_pins: pinmux_guardian_led_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat3.mmc0_dat3 */
-			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat2.mmc0_dat2 */
-			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat1.mmc0_dat1 */
-			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat0.mmc0_dat0 */
-			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_clk.mmc0_clk */
-			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_cmd.mmc0_cmd */
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)         /* GPIO0_6 */
-		>;
-	};
-
-	spi0_pins: pinmux_spi0_pins {
-		pinctrl-single,pins = <
-			/* SPI0_CLK  - spi0_clk.spi */
-			AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-			/* SPI0_MOSI - spi0_d0.spi0 */
-			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			/* SPI0_MISO - spi0_d1.spi0 */
-			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* SPI0_CS0 - spi */
-			AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* uart0_txd.uart0_txd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			/* K18 uart2_rxd.mirx_txd */
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1)
-			/* L18 uart2_txd.mirx_rxd */
-			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1)
-		>;
-	};
-
-	nandflash_pins: pinmux_nandflash_pins {
-		pinctrl-single,pins = <
-			/* (U7) gpmc_ad0.gpmc_ad0 */
-			AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
-			/* (V7) gpmc_ad1.gpmc_ad1 */
-			AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
-			/* (R8) gpmc_ad2.gpmc_ad2 */
-			AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
-			/* (T8) gpmc_ad3.gpmc_ad3 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
-			/* (U8) gpmc_ad4.gpmc_ad4 */
-			AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
-			/* (V8) gpmc_ad5.gpmc_ad5 */
-			AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
-			/* (R9) gpmc_ad6.gpmc_ad6 */
-			AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
-			/* (T9) gpmc_ad7.gpmc_ad7 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
-			/* (T17) gpmc_wait0.gpmc_wait0 */
-			AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
-			/* (U17) gpmc_wpn.gpmc_wpn */
-			AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
-			/* (V6) gpmc_csn0.gpmc_csn0 */
-			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
-			/* (R7) gpmc_advn_ale.gpmc_advn_ale */
-			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
-			/* (T7) gpmc_oen_ren.gpmc_oen_ren */
-			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
-			/* (U6) gpmc_wen.gpmc_wen */
-			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
-			/* (T6) gpmc_be0n_cle.gpmc_be0n_cle */
-			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
deleted file mode 100644
index 5835c0cdda50b..0000000000000
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ /dev/null
@@ -1,518 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * AM335x ICE V2 board
- * http://www.ti.com/tool/tmdsice3359
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "TI AM3359 ICE-V2";
-	compatible = "ti,am3359-icev2", "ti,am33xx";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	vtt_fixed: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-	};
-
-	leds-iio {
-		status = "disabled";
-		compatible = "gpio-leds";
-		led-out0 {
-			label = "out0";
-			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out1 {
-			label = "out1";
-			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out2 {
-			label = "out2";
-			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out3 {
-			label = "out3";
-			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out4 {
-			label = "out4";
-			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out5 {
-			label = "out5";
-			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out6 {
-			label = "out6";
-			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out7 {
-			label = "out7";
-			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	/* Tricolor status LEDs */
-	leds1 {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds>;
-
-		led0 {
-			label = "status0:red:cpu0";
-			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu0";
-		};
-
-		led1 {
-			label = "status0:green:usr";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "status0:yellow:usr";
-			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "status1:red:mmc0";
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-
-		led4 {
-			label = "status1:green:usr";
-			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led5 {
-			label = "status1:yellow:usr";
-			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-	gpio-decoder {
-		compatible = "gpio-decoder";
-		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
-			<&pca9536 2 GPIO_ACTIVE_HIGH>,
-			<&pca9536 1 GPIO_ACTIVE_HIGH>,
-			<&pca9536 0 GPIO_ACTIVE_HIGH>;
-		linux,axis = <0>; /* ABS_X */
-		decoder-max-value = <9>;
-	};
-};
-
-&am33xx_pinmux {
-	user_leds: user_leds {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */
-		>;
-	};
-
-	mmc0_pins_default: mmc0_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	i2c0_pins_default: i2c0_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
-		>;
-	};
-
-	spi0_pins_default: spi0_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */
-		>;
-	};
-
-	uart3_pins_default: uart3_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLUP, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1, RMII mode */
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txen.rmii1_txen */
-			/* Slave 2, RMII mode */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_wait0.rmii2_crs_dv */
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_col.rmii2_refclk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a11.rmii2_rxd0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a10.rmii2_rxd1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_wpn.rmii2_rxerr */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* gpmc_a5.rmii2_txd0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* gpmc_a4.rmii2_txd1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* gpmc_a0.rmii2_txen */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-
-			/* Slave 2 reset value */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_default>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: power-controller@2d {
-		reg = <0x2d>;
-	};
-
-	tpic2810: gpio@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	pca9536: gpio@41 {
-		compatible = "ti,pca9536";
-		reg = <0x41>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	/* osd9616p0899-10 */
-	display@3c {
-		compatible = "solomon,ssd1306fb-i2c";
-		reg = <0x3c>;
-		solomon,height = <16>;
-		solomon,width = <96>;
-		solomon,com-seq;
-		solomon,com-invdir;
-		solomon,page-offset = <0>;
-		solomon,prechargep1 = <2>;
-		solomon,prechargep2 = <13>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_default>;
-
-	sn65hvs882@1 {
-		compatible = "pisosr-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
-
-		reg = <1>;
-		spi-max-frequency = <1000000>;
-		spi-cpol;
-	};
-
-	spi_nor: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "winbond,w25q64", "jedec,spi-nor";
-		spi-max-frequency = <80000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "u-boot";
-			reg = <0x80000 0x100000>;
-			read-only;
-		};
-
-		partition@2 {
-			label = "u-boot-env";
-			reg = <0x180000 0x20000>;
-			read-only;
-		};
-
-		partition@3 {
-			label = "misc";
-			reg = <0x1A0000 0x660000>;
-		};
-	};
-
-};
-
-&tscadc {
-	status = "okay";
-	adc {
-		ti,adc-channels = <1 2 3 4 5 6 7>;
-	};
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1326000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_default>;
-};
-
-&gpio0_target {
-	/* Do not idle the GPIO used for holding the VTT regulator */
-	ti,no-reset-on-init;
-	ti,no-idle-on-init;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_default>;
-	status = "okay";
-};
-
-&gpio3 {
-	pr1-mii-ctl-hog {
-		gpio-hog;
-		gpios = <4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PR1_MII_CTRL";
-	};
-
-	mux-mii-hog {
-		gpio-hog;
-		gpios = <10 GPIO_ACTIVE_HIGH>;
-		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
-		output-high;
-		line-name = "MUX_MII_CTL1";
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <2>;
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-	reset-delay-us = <2>;   /* PHY datasheet states 1uS min */
-
-	ethphy0: ethernet-phy@1 {
-		reg = <1>;
-	};
-
-	ethphy1: ethernet-phy@3 {
-		reg = <3>;
-	};
-};
-
-&pruss_tm {
-	status = "okay";
-};
-
-&rtc {
-	system-power-controller;
-};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
deleted file mode 100644
index 3fddf80dcf714..0000000000000
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ /dev/null
@@ -1,300 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
- *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-
-		compatible = "gpio-leds";
-
-		led0 {
-			label = "com:green:user";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	vmmc: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	nandflash_pins: pinmux_nandflash_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-		>;
-	};
-};
-
-&mac_sw {
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <2>;
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-
-	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		nand-bus-width = <8>;
-		ti,nand-ecc-opt = "bch8";
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ti,elm-id = <&elm>;
-
-		/* MTD partition table */
-		partition@0 {
-			label = "SPL";
-			reg = <0x00000000 0x00080000>;
-		};
-
-		partition@1 {
-			label = "U-boot";
-			reg = <0x00080000 0x001e0000>;
-		};
-
-		partition@2 {
-			label = "U-Boot Env";
-			reg = <0x00260000 0x00020000>;
-		};
-
-		partition@3 {
-			label = "Kernel";
-			reg = <0x00280000 0x00500000>;
-		};
-
-		partition@4 {
-			label = "File System";
-			reg = <0x00780000 0x07880000>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc>;
-	bus-width = <4>;
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-always-on;
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
deleted file mode 100644
index 1282dae144ddc..0000000000000
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ /dev/null
@@ -1,347 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 NovaTech LLC - https://www.novatechweb.com
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "NovaTech OrionLXm";
-	compatible = "novatech,am335x-lxm", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	/* Power supply provides a fixed 5V @2A */
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	/* Power supply provides a fixed 3.3V @3A */
-	vmmcsd_fixed: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-};
-
-&am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_int */
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii1_crs_dv */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii1_rxer */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* rmii1_txen */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* rmii1_td1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* rmii1_td0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii1_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii1_rd0 */
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
-
-			/* Slave 2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* rmii2_txen */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* rmii2_td1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* rmii2_td0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* rmii2_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* rmii2_rd0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* rmii2_crs_dv */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* rmii2_rxer */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_int */
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii2_refclk */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_int */
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_crs_dv */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_rxer */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_txen */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_td1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_td0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_rd0 */
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_refclk */
-
-			/* Slave 2 reset value*/
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_txen */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_td1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_td0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_rd0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_crs_dv */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_rxer */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_int */
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_refclk */
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	emmc_pins: pinmux_emmc_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	serial_config1: serial_config1@20 {
-		compatible = "nxp,pca9539";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	serial_config2: serial_config2@21 {
-		compatible = "nxp,pca9539";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	tps: tps@2d {
-		compatible = "ti,tps65910";
-		reg = <0x2d>;
-	};
-};
-
-/include/ "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		/* vrtc - unused */
-
-		vio_reg: regulator@1 {
-			regulator-name = "vio_1v5,ddr";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			regulator-name = "vdd1,mpu";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			regulator-name = "vdd2_1v1,core";
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		/* vdd3 - unused */
-
-		/* vdig1 - unused */
-
-		vdig2_reg: regulator@6 {
-			regulator-name = "vdig2_1v8,vdds_pll";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		/* vpll - unused */
-
-		vdac_reg: regulator@8 {
-			regulator-name = "vdac_1v8,vdds";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-name = "vaux1_1v8,usb";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-name = "vaux2_3v3,io";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-name = "vaux33_3v3,usb";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-name = "vmmc_3v3,io";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "host";
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <2>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <3>;
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	ethphy0: ethernet-phy@5 {
-		reg = <5>;
-	};
-
-	ethphy1: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
deleted file mode 100644
index 49e280b42442f..0000000000000
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ /dev/null
@@ -1,225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
- *
- * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
- *          Wes Huang (黃淵河) <wes.huang@moxa.com>
- *          Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
- */
-
-#include "am33xx.dtsi"
-
-/ {
-	vbat: vbat-regulator {
-		compatible = "regulator-fixed";
-	};
-
-	/* Power supply provides a fixed 3.3V @3A */
-	vmmcsd_fixed: vmmcsd-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
-	buttons: push_button {
-		compatible = "gpio-keys";
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	push_button_pins: pinmux_push_button {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_hsync.gpio2_23 */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	mmc1_pins_default: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			/* eMMC */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad12.mmc1_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad13.mmc1_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad14.mmc1_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad15.mmc1_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad8.mmc1_dat4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad9.mmc1_dat5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad10.mmc1_dat6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad11.mmc1_dat7 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-		>;
-	};
-
-	spi0_pins: pinmux_spi0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-};
-
-&uart0 {
-	/* Console */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c16";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
-	rtc_wdt: rtc_wdt@68 {
-		compatible = "dallas,ds1374";
-		reg = <0x68>;
-	};
-};
-
-&usb0 {
-	dr_mode = "host";
-};
-
-/* Power */
-&vbat {
-	regulator-name = "vbat";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-};
-
-&mac_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cpsw_default>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&davinci_mdio_default>;
-	status = "okay";
-};
-
-&cpsw_port1 {
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	ti,dual-emac-pvid = <2>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&gpio0_target {
-	ti,no-reset-on-init;
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	pinctrl-0 = <&mmc1_pins_default>;
-	non-removable;
-	status = "okay";
-};
-
-&buttons {
-	pinctrl-names = "default";
-	pinctrl-0 = <&push_button_pins>;
-
-	button-0 {
-		label = "push_button";
-		linux,code = <0x100>;
-		gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	};
-};
-
-/* SPI Busses */
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-
-	flash@0 {
-		compatible = "mx25l6405d";
-		spi-max-frequency = <40000000>;
-
-		reg = <0>;
-		spi-cpol;
-		spi-cpha;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/* reg : The partition's offset and size within the mtd bank. */
-			partitions@0 {
-				label = "MLO";
-				reg = <0x0 0x80000>;
-			};
-
-			partitions@1 {
-				label = "U-Boot";
-				reg = <0x80000 0x100000>;
-			};
-
-			partitions@2 {
-				label = "U-Boot Env";
-				reg = <0x180000 0x40000>;
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-
-	tpm_spi_tis@0 {
-		compatible = "tcg,tpm_tis-spi";
-		reg = <0>;
-		spi-max-frequency = <500000>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
deleted file mode 100644
index 1cc513ed92ccf..0000000000000
--- a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
- *
- * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
- *          Wes Huang (黃淵河) <wes.huang@moxa.com>
- *          Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
- */
-
-/dts-v1/;
-
-#include "am335x-moxa-uc-2100-common.dtsi"
-
-/ {
-	model = "Moxa UC-2101";
-	compatible = "moxa,uc-2101", "ti,am33xx";
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "UC2100:GREEN:USER";
-			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txen.rmii1_txen */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	spi1_pins: pinmux_spi1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4)	 /* ecap0_in_pwm0_out.spi1_sclk */
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE4)	 /* uart1_ctsn.spi1_cs0 */
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4)	 /* uart0_ctsn.spi1_d0 */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4)	 /* uart0_rtsn.spi1_d1 */
-		>;
-	};
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&phy0>;
-	phy-mode = "rmii";
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
deleted file mode 100644
index 7d00e8b20f18a..0000000000000
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ /dev/null
@@ -1,421 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2020 MOXA Inc. - https://www.moxa.com/
- *
- * Author: Johnson Chen <johnsonch.chen@moxa.com>
- */
-
-#include "am33xx.dtsi"
-
-/ {
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	vbat: vbat-regulator {
-		compatible = "regulator-fixed";
-	};
-
-	/* Power supply provides a fixed 3.3V @3A */
-	vmmcsd_fixed: vmmcsd-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
-	buttons: push_button {
-		compatible = "gpio-keys";
-	};
-
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&minipcie_pins>;
-
-	minipcie_pins: pinmux_minipcie {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_pclk.gpio2_24 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_ac_bias_en.gpio2_25 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_vsync.gpio2_22  Power off PIN*/
-		>;
-	};
-
-	push_button_pins: pinmux_push_button {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_ahcklx.gpio3_21 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart0_ctsn.i2c1_sda */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart0_rtsn.i2c1_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6)		/* lcd_data14.uart5_ctsn */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6)  /* lcd_data15.uart5_rtsn */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4)     /* lcd_data9.uart5_rxd */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4)		/* lcd_data8.uart5_txd */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
-
-			/* Slave 2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_crs_dv */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_rxer */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)  /* rmii2_txen */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3)  /* rmii2_td1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3)  /* rmii2_td0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_rd0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1)  /* rmii2_refclk */
-
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	mmc0_pins_default: pinmux_mmc0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7)	/* mcasp0_aclkx.gpio3_14 */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)    /* mcasp0_aclkx.gpio3_18 */
-		>;
-	};
-
-	mmc2_pins_default: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			/* eMMC */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad12.mmc2_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad13.mmc2_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad14.mmc2_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad15.mmc2_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad8.mmc2_dat4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad9.mmc2_dat5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad10.mmc2_dat6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad11.mmc2_dat7 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)     /* gpmc_csn3.mmc2_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc2_clk */
-		>;
-	};
-
-	spi0_pins: pinmux_spi0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-};
-
-&uart0 {
-	/* Console */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&uart1 {
-	/* UART 1 setting */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart5 {
-	/* UART 2 setting */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		compatible = "ti,tps65910";
-		reg = <0x2d>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c16";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
-	rtc_wdt: rtc_wdt@68 {
-		compatible = "dallas,ds1374";
-		reg = <0x68>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-	gpio_xten: gpio_xten@27 {
-		compatible = "nxp,pca9535";
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0x27>;
-	};
-};
-
-&usb0 {
-	dr_mode = "host";
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-
-#include "tps65910.dtsi"
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			compatible = "regulator-fixed";
-			regulator-name = "vmmc_reg";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-/* Power */
-&vbat {
-	regulator-name = "vbat";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-};
-
-&mac_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cpsw_default>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&davinci_mdio_default>;
-
-	ethphy0: ethernet-phy@4 {
-		reg = <4>;
-	};
-
-	ethphy1: ethernet-phy@5 {
-		reg = <5>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <2>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&gpio0_target {
-	ti,no-reset-on-init;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-0 = <&mmc0_pins_default>;
-	cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&mmc3 {
-	dmas = <&edma_xbar 12 0 1
-			&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-	pinctrl-names = "default";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	pinctrl-0 = <&mmc2_pins_default>;
-	ti,non-removable;
-	status = "okay";
-};
-
-&buttons {
-	pinctrl-names = "default";
-	pinctrl-0 = <&push_button_pins>;
-
-	button-0 {
-		label = "push_button";
-		linux,code = <0x100>;
-		gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
-	};
-};
-
-/* SPI Busses */
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-
-	flash@0 {
-		compatible = "mx25l6405d";
-		spi-max-frequency = <40000000>;
-
-		reg = <0>;
-		spi-cpol;
-		spi-cpha;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* reg : The partition's offset and size within the mtd bank. */
-		partitions@0 {
-			label = "MLO";
-			reg = <0x0 0x80000>;
-		};
-
-		partitions@1 {
-			label = "U-Boot";
-			reg = <0x80000 0x100000>;
-		};
-
-		partitions@2 {
-			label = "U-Boot Env";
-			reg = <0x180000 0x20000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
deleted file mode 100644
index 0c7949d21bd9a..0000000000000
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 MOXA Inc. - https://www.moxa.com/
- *
- * Author: SZ Lin (林上智) <sz.lin@moxa.com>
- */
-/dts-v1/;
-
-#include "am335x-moxa-uc-8100-common.dtsi"
-
-/ {
-	model = "Moxa UC-8100-ME-T";
-	compatible = "moxa,uc-8100-me-t", "ti,am33xx";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "uc8100me:CEL1";
-			gpios = <&gpio_xten 8 0>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "uc8100me:CEL2";
-			gpios = <&gpio_xten 9 0>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "uc8100me:CEL3";
-			gpios = <&gpio_xten 10 0>;
-			default-state = "off";
-		};
-
-		led4 {
-			label = "uc8100me:DIA1";
-			gpios = <&gpio_xten 11 0>;
-			default-state = "off";
-		};
-		led5 {
-			label = "uc8100me:DIA2";
-			gpios = <&gpio_xten 12 0>;
-			default-state = "off";
-		};
-		led6 {
-			label = "uc8100me:DIA3";
-			gpios = <&gpio_xten 13 0>;
-			default-state = "off";
-		};
-		led7 {
-			label = "uc8100me:SD";
-			gpios = <&gpio_xten 14 0>;
-			default-state = "off";
-		};
-		led8 {
-			label = "uc8100me:USB";
-			gpios = <&gpio_xten 15 0>;
-			default-state = "off";
-		};
-		led9 {
-			label = "uc8100me:USER";
-			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
-
-&i2c0 {
-	tpm: tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-	};
-};
-
-&tps {
-	regulators {
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
deleted file mode 100644
index 6eea18b293557..0000000000000
--- a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
+++ /dev/null
@@ -1,276 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
-
-/* Based on code by myc_c335x.dts, MYiRtech.com */
-/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "MYIR MYC-AM335X";
-	compatible = "myir,myc-am335x", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd_core>;
-			voltage-tolerance = <2>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	clk32k: clk32k {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-
-		#clock-cells = <0>;
-	};
-
-	vdd_mod: vdd_mod_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-mod";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vdd_core: vdd_core_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-core";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vdd_mod>;
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_mod_pins>;
-
-		led_mod: led_mod {
-			label = "module:user";
-			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			default-state = "off";
-			panic-indicator;
-		};
-	};
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&eth_slave1_pins_default>;
-	pinctrl-1 = <&eth_slave1_pins_sleep>;
-	status = "okay";
-};
-
-&cpsw_port1 {
-	phy-handle = <&phy0>;
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mdio_pins_default>;
-	pinctrl-1 = <&mdio_pins_sleep>;
-
-	phy0: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&nand_pins_default>;
-	pinctrl-1 = <&nand_pins_sleep>;
-	ranges = <0 0 0x8000000 0x1000000>;
-	status = "okay";
-
-	nand0: nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>;
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE_NONE>;
-		nand-bus-width = <8>;
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		ti,elm-id = <&elm>;
-		ti,nand-ecc-opt = "bch8";
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default", "gpio", "sleep";
-	pinctrl-0 = <&i2c0_pins_default>;
-	pinctrl-1 = <&i2c0_pins_gpio>;
-	pinctrl-2 = <&i2c0_pins_sleep>;
-	clock-frequency = <400000>;
-	scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c32";
-		reg = <0x50>;
-		pagesize = <32>;
-		vcc-supply = <&vdd_mod>;
-	};
-};
-
-&rtc {
-	clocks = <&clk32k>;
-	clock-names = "ext-clk";
-	system-power-controller;
-};
-
-&am33xx_pinmux {
-	mdio_pins_default: pinmux_mdio_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)	/* mdio_data */
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)			/* mdio_clk */
-		>;
-	};
-
-	mdio_pins_sleep: pinmux_mdio_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	eth_slave1_pins_default: pinmux_eth_slave1_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_tctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_rctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_td3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_td2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_td1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_td0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_tclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_rclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_rd3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_rd2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_rd0 */
-		>;
-	};
-
-	eth_slave1_pins_sleep: pinmux_eth_slave1_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	i2c0_pins_default: pinmux_i2c0_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0)	/* I2C0_SDA */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0)	/* I2C0_SCL */
-		>;
-	};
-
-	i2c0_pins_gpio: pinmux_i2c0_pins_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE7)			/* gpio3[5] */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE7)			/* gpio3[6] */
-		>;
-	};
-
-	i2c0_pins_sleep: pinmux_i2c0_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	led_mod_pins: pinmux_led_mod_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* gpio3[18] */
-		>;
-	};
-
-	nand_pins_default: pinmux_nand_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad7 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_wait0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)		/* gpio0[31] */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)			/* gpmc_csn0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)			/* gpmc_advn_ale */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)			/* gpmc_oen_ren */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)			/* gpmc_wen */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)			/* gpmc_be0n_cle */
-		>;
-	};
-
-	nand_pins_sleep: pinmux_nand_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts
deleted file mode 100644
index 425ad9b81a68a..0000000000000
--- a/arch/arm/boot/dts/am335x-myirtech-myd.dts
+++ /dev/null
@@ -1,549 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
-/* Based on code by myd_c335x.dts, MYiRtech.com */
-/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
-
-/dts-v1/;
-
-#include "am335x-myirtech-myc.dtsi"
-
-#include <dt-bindings/display/tda998x.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "MYIR MYD-AM335X";
-	compatible = "myir,myd-am335x", "myir,myc-am335x", "ti,am33xx";
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	clk12m: clk12m {
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-
-		#clock-cells = <0>;
-	};
-
-	gpio_buttons: gpio_buttons {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_buttons_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button1: button@0 {
-			reg = <0>;
-			label = "button1";
-			linux,code = <BTN_1>;
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-		};
-
-		button2: button@1 {
-			reg = <1>;
-			label = "button2";
-			linux,code = <BTN_2>;
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sound: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&master_codec>;
-		simple-audio-card,frame-master = <&master_codec>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp0>;
-		};
-
-		master_codec: simple-audio-card,codec@1 {
-			sound-dai = <&sgtl5000>;
-		};
-
-		simple-audio-card,codec@2 {
-			sound-dai = <&tda9988>;
-		};
-	};
-
-	vdd_5v0: vdd_5v0_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vdd_3v3: vdd_3v3_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vdd_5v0>;
-	};
-};
-
-&cpsw_port2 {
-	status = "okay";
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-};
-
-&davinci_mdio_sw {
-	phy1: ethernet-phy@6 {
-		reg = <6>;
-		eee-broken-1000t;
-	};
-};
-
-&mac_sw {
-	pinctrl-0 = <&eth_slave1_pins_default>, <&eth_slave2_pins_default>;
-	pinctrl-1 = <&eth_slave1_pins_sleep>, <&eth_slave2_pins_sleep>;
-	slaves = <2>;
-};
-
-&dcan0 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan0_pins_default>;
-	pinctrl-1 = <&dcan0_pins_sleep>;
-	status = "okay";
-};
-
-&dcan1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan1_pins_default>;
-	pinctrl-1 = <&dcan1_pins_sleep>;
-	status = "okay";
-};
-
-&ehrpwm0 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&ehrpwm0_pins_default>;
-	pinctrl-1 = <&ehrpwm0_pins_sleep>;
-	status = "okay";
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default", "gpio", "sleep";
-	pinctrl-0 = <&i2c1_pins_default>;
-	pinctrl-1 = <&i2c1_pins_gpio>;
-	pinctrl-2 = <&i2c1_pins_sleep>;
-	clock-frequency = <400000>;
-	scl-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	sgtl5000: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg =<0xa>;
-		clocks = <&clk12m>;
-		micbias-resistor-k-ohms = <4>;
-		micbias-voltage-m-volts = <2250>;
-		VDDA-supply = <&vdd_3v3>;
-		VDDIO-supply = <&vdd_3v3>;
-
-		#sound-dai-cells = <0>;
-	};
-
-	tda9988: tda9988@70 {
-		compatible = "nxp,tda998x";
-		reg =<0x70>;
-		audio-ports = <TDA998x_I2S 1>;
-
-		#sound-dai-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				hdmi_0: endpoint {
-					remote-endpoint = <&lcdc_0>;
-				};
-			};
-		};
-	};
-};
-
-&lcdc {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&lcdc_pins_default>;
-	pinctrl-1 = <&lcdc_pins_sleep>;
-	blue-and-red-wiring = "straight";
-	status = "okay";
-
-	port {
-		lcdc_0: endpoint@0 {
-			remote-endpoint = <&hdmi_0>;
-		};
-	};
-};
-
-&leds {
-	pinctrl-0 = <&led_mod_pins &leds_pins>;
-
-	led1: led1 {
-		label = "base:user1";
-		gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		color = <LED_COLOR_ID_GREEN>;
-		default-state = "off";
-	};
-
-	led2: led2 {
-		label = "base:user2";
-		gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-		color = <LED_COLOR_ID_GREEN>;
-		default-state = "off";
-	};
-};
-
-&mcasp0 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp0_pins_default>;
-	pinctrl-1 = <&mcasp0_pins_sleep>;
-	op-mode = <0>;
-	tdm-slots = <2>;
-	serial-dir = <0 1 2 0>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-	status = "okay";
-
-	#sound-dai-cells = <0>;
-};
-
-&mmc1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_sleep>;
-	cd-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	vmmc-supply = <&vdd_3v3>;
-	status = "okay";
-};
-
-&nand0 {
-	nand_parts: partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "MLO";
-			reg = <0x00000 0x20000>;
-		};
-
-		partition@80000 {
-			label = "boot";
-			reg = <0x80000 0x100000>;
-		};
-	};
-};
-
-&tscadc {
-	status = "okay";
-
-	adc: adc {
-		ti,adc-channels = <0 1 2 3 4 5 6>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&uart1_pins_default>;
-	pinctrl-1 = <&uart1_pins_sleep>;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&uart2_pins_default>;
-	pinctrl-1 = <&uart2_pins_sleep>;
-	status = "okay";
-};
-
-&usb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb_pins>;
-};
-
-&usb0 {
-	dr_mode = "otg";
-};
-
-&usb0_phy {
-	vcc-supply = <&vdd_5v0>;
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&usb1_phy {
-	vcc-supply = <&vdd_5v0>;
-};
-
-&vdd_mod {
-	vin-supply = <&vdd_3v3>;
-};
-
-&am33xx_pinmux {
-	dcan0_pins_default: pinmux_dcan0_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2)			/* dcan0_tx_mux2 */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2)			/* dcan0_rx_mux2 */
-		>;
-	};
-
-	dcan0_pins_sleep: pinmux_dcan0_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	dcan1_pins_default: pinmux_dcan1_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)			/* dcan1_tx_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)			/* dcan1_rx_mux0 */
-		>;
-	};
-
-	dcan1_pins_sleep: pinmux_dcan1_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	ehrpwm0_pins_default: pinmux_ehrpwm0_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_OUTPUT, MUX_MODE3)			/* ehrpwm0A_mux1 */
-		>;
-	};
-
-	ehrpwm0_pins_sleep: pinmux_ehrpwm0_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	eth_slave2_pins_default: pinmux_eth_slave2_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_tctl */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_rctl */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_td3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_td2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_td1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_td0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_tclk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_rclk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_rd3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_rd2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2		/* rgmii2_rd1 */)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2		/* rgmii2_rd0 */)
-		>;
-	};
-
-	eth_slave2_pins_sleep: pinmux_eth_slave2_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	gpio_buttons_pins: pinmux_gpio_buttons_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* gpio3[0] */
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT, MUX_MODE7)			/* gpio0[29] */
-		>;
-	};
-
-	i2c1_pins_default: pinmux_i2c1_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2)	/* I2C1_SDA_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2)	/* I2C1_SCL_mux3 */
-		>;
-	};
-
-	i2c1_pins_gpio: pinmux_i2c1_pins_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE7)			/* gpio0[4] */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE7)			/* gpio0[5] */
-		>;
-	};
-
-	i2c1_pins_sleep: pinmux_i2c1_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	lcdc_pins_default: pinmux_lcdc_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)			/* lcd_data0 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)			/* lcd_data1 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)			/* lcd_data2 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)			/* lcd_data3 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)			/* lcd_data4 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)			/* lcd_data5 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)			/* lcd_data6 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)			/* lcd_data7 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)			/* lcd_data8 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)			/* lcd_data9 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)			/* lcd_data10 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)			/* lcd_data11 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)			/* lcd_data12 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)			/* lcd_data13 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)			/* lcd_data14 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)			/* lcd_data15 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)			/* lcd_vsync */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)			/* lcd_hsync */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)			/* lcd_pclk */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)		/* lcd_ac_bias_en */
-		>;
-	};
-
-	lcdc_pins_sleep: pinmux_lcdc_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7)			/* gpio0[27] */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE7)			/* gpio0[3] */
-		>;
-	};
-
-	mcasp0_pins_default: pinmux_mcasp0_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* mcasp0_aclkx_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* mcasp0_fsx_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* mcasp0_axr2_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* mcasp0_axr1_mux0 */
-		>;
-	};
-
-	mcasp0_pins_sleep: pinmux_mcasp0_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins_default: pinmux_mmc1_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_clk */
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_cmd */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7)		/* gpio3[21] */
-		>;
-	};
-
-	mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)		/* uart0_rxd */
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* uart0_txd */
-		>;
-	};
-
-	uart1_pins_default: pinmux_uart1_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)		/* uart1_rxd */
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* uart1_txd */
-		>;
-	};
-
-	uart1_pins_sleep: pinmux_uart1_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	uart2_pins_default: pinmux_uart2_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE6)			/* uart2_rxd_mux1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_OUTPUT, MUX_MODE6)			/* uart2_txd_mux1 */
-		>;
-	};
-
-	uart2_pins_sleep: pinmux_uart2_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	usb_pins: pinmux_usb_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_USB0_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* USB0_DRVVBUS */
-			AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* USB1_DRVVBUS */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
deleted file mode 100644
index c447aebd8d866..0000000000000
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ /dev/null
@@ -1,492 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "Newflow AM335x NanoBone";
-	compatible = "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 {
-			label = "nanobone:green:usr1";
-			gpios = <&gpio1 5 0>;
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&misc_pins>;
-
-	misc_pins: misc_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7)	/* spi0_cs0.gpio0_5 */
-		>;
-	};
-
-	gpmc_pins: gpmc_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE0)
-
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE0)
-
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
-
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE1)		/* lcd_data1.gpmc_a1 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE1)		/* lcd_data2.gpmc_a2 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE1)		/* lcd_data3.gpmc_a3 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE1)		/* lcd_data4.gpmc_a4 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE1)		/* lcd_data5.gpmc_a5 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE1)		/* lcd_data6.gpmc_a6 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE1)		/* lcd_data7.gpmc_a7 */
-
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
-		>;
-	};
-
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart0_pins: uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	uart1_pins: uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	uart2_pins: uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_INPUT_PULLUP, MUX_MODE7)	/* lcd_data8.gpio2[14] */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7)		/* lcd_data9.gpio2[15] */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)		/* spi0_sclk.uart2_rxd */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)		/* spi0_d0.uart2_txd */
-		>;
-	};
-
-	uart3_pins: uart3_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE7)	/* lcd_data10.gpio2[16] */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7)		/* lcd_data11.gpio2[17] */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE1)		/* spi0_cs1.uart3_rxd */
-			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT, MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
-		>;
-	};
-
-	uart4_pins: uart4_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE7)	/* lcd_data12.gpio0[8] */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7)		/* lcd_data13.gpio0[9] */
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE1)		/* uart0_rtsn.uart4_txd */
-		>;
-	};
-
-	uart5_pins: uart5_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE4)		/* lcd_data14.uart5_rxd */
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT, MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
-		>;
-	};
-
-	mmc1_pins: mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7)	/* emu1.gpio3[8] */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-	rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	rs485-rx-during-tx;
-	rs485-rts-delay = <1 1>;
-	linux,rs485-enabled-at-boot-time;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-	rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	rs485-rts-delay = <1 1>;
-	linux,rs485-enabled-at-boot-time;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	rts-gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	rs485-rx-during-tx;
-	rs485-rts-delay = <1 1>;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-	rts-gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	rs485-rx-during-tx;
-	rs485-rts-delay = <1 1>;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart5_pins>;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	gpio@20 {
-		compatible = "microchip,mcp23017";
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0x20>;
-	};
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	temperature-sensor@48 {
-		compatible = "lm75";
-		reg = <0x48>;
-	};
-
-	eeprom@53 {
-		compatible = "microchip,24c02", "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <8>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1307";
-		reg = <0x68>;
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	compatible = "ti,am3352-gpmc";
-	status = "okay";
-	gpmc,num-waitpins = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmc_pins>;
-
-	#address-cells = <2>;
-	#size-cells = <1>;
-	ranges = <0 0 0x08000000 0x08000000>,	/* CS0: NOR 128M */
-		 <1 0 0x1c000000 0x01000000>;	/* CS1: FRAM 16M */
-
-	nor@0,0 {
-		reg = <0 0x00000000 0x08000000>;
-		compatible = "cfi-flash";
-		linux,mtd-name = "spansion,s29gl010p11t";
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <2>;
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <160>;
-		gpmc,cs-wr-off-ns = <160>;
-		gpmc,adv-on-ns = <10>;
-		gpmc,adv-rd-off-ns = <30>;
-		gpmc,adv-wr-off-ns = <30>;
-		gpmc,oe-on-ns = <40>;
-		gpmc,oe-off-ns = <160>;
-		gpmc,we-on-ns = <40>;
-		gpmc,we-off-ns = <160>;
-		gpmc,rd-cycle-ns = <160>;
-		gpmc,wr-cycle-ns = <160>;
-		gpmc,access-ns = <150>;
-		gpmc,page-burst-access-ns = <10>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-delay-ns = <20>;
-		gpmc,wr-data-mux-bus-ns = <70>;
-		gpmc,wr-access-ns = <80>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/*
-		MTD partition table
-		===================
-		+------------+-->0x00000000-> U-Boot start
-		|            |
-		|            |-->0x000BFFFF-> U-Boot end
-		|            |-->0x000C0000-> ENV1 start
-		|            |
-		|            |-->0x000DFFFF-> ENV1 end
-		|            |-->0x000E0000-> ENV2 start
-		|            |
-		|            |-->0x000FFFFF-> ENV2 end
-		|            |-->0x00100000-> Kernel start
-		|            |
-		|            |-->0x004FFFFF-> Kernel end
-		|            |-->0x00500000-> File system start
-		|            |
-		|            |-->0x01FFFFFF-> File system end
-		|            |-->0x02000000-> User data start
-		|            |
-		|            |-->0x03FFFFFF-> User data end
-		|            |-->0x04000000-> Data storage start
-		|            |
-		+------------+-->0x08000000-> NOR end (Free end)
-		*/
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x000c0000>; /* 768KB */
-		};
-
-		partition@1 {
-			label = "env1";
-			reg = <0x000c0000 0x00020000>; /* 128KB */
-		};
-
-		partition@2 {
-			label = "env2";
-			reg = <0x000e0000 0x00020000>; /* 128KB */
-		};
-
-		partition@3 {
-			label = "kernel";
-			reg = <0x00100000 0x00400000>; /* 4MB */
-		};
-
-		partition@4 {
-			label = "rootfs";
-			reg = <0x00500000 0x01b00000>; /* 27MB */
-		};
-
-		partition@5 {
-			label = "user";
-			reg = <0x02000000 0x02000000>; /* 32MB */
-		};
-
-		partition@6 {
-			label = "data";
-			reg = <0x04000000 0x04000000>; /* 64MB */
-		};
-	};
-
-	fram@1,0 {
-		reg = <1 0x00000000 0x01000000>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <2>;
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <160>;
-		gpmc,cs-wr-off-ns = <160>;
-		gpmc,adv-on-ns = <10>;
-		gpmc,adv-rd-off-ns = <20>;
-		gpmc,adv-wr-off-ns = <20>;
-		gpmc,oe-on-ns = <30>;
-		gpmc,oe-off-ns = <150>;
-		gpmc,we-on-ns = <30>;
-		gpmc,we-off-ns = <150>;
-		gpmc,rd-cycle-ns = <160>;
-		gpmc,wr-cycle-ns = <160>;
-		gpmc,access-ns = <130>;
-		gpmc,page-burst-access-ns = <10>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		gpmc,cycle2cycle-delay-ns = <10>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-		gpmc,wr-access-ns = <0>;
-	};
-};
-
-&mac_sw {
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "mii";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "mii";
-	ti,dual-emac-pvid = <2>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&ldo4_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	bus-width = <4>;
-	cd-debounce-delay-ms = <5>;
-	cd-gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-};
-
-&usb0 {
-	dr_mode = "host";
-};
-
-#include "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			/* +1.5V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1450000>;
-			regulator-max-microvolt = <1550000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <915000>;
-			regulator-max-microvolt = <1140000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <915000>;
-			regulator-max-microvolt = <1140000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			/* +1.8V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1750000>;
-			regulator-max-microvolt = <1870000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			/* +3.3V voltage with ±4% tolerance */
-			regulator-min-microvolt = <3175000>;
-			regulator-max-microvolt = <3430000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			/* +1.8V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1750000>;
-			regulator-max-microvolt = <1870000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			/* +3.3V voltage with ±4% tolerance */
-			regulator-min-microvolt = <3175000>;
-			regulator-max-microvolt = <3430000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
deleted file mode 100644
index 2e049489ac066..0000000000000
--- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
+++ /dev/null
@@ -1,231 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "NetCAN";
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led@1 {
-			label = "can_data";
-			linux,default-trigger = "netdev";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-		led@2 {
-			label = "can_error";
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Data LED */
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Error LED */
-		>;
-	};
-
-	dcan1_pins: pinmux_dcan1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)	/* CAN TX */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)	/* CAN RX */
-		>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-
-	status = "okay";
-};
-
-&gpio0 {
-	gpio-line-names =
-		"MDIO",
-		"MDC",
-		"NC",
-		"NC",
-		"I2C1_SDA",
-		"I2C1_SCL",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"can_data",
-		"can_error",
-		"onrisc:blue:wlan",
-		"onrisc:green:app",
-		"USB0_DRVVBUS",
-		"ETH2_INT",
-		"NC",
-		"NC",
-		"MMC1_DAT0",
-		"MMC1_DAT1",
-		"NC",
-		"NC",
-		"MMC1_DAT2",
-		"MMC1_DAT3",
-		"NC",
-		"NC",
-		"GPMC_WAIT0",
-		"GPMC_WP_N";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"GPMC_AD0",
-		"GPMC_AD1",
-		"GPMC_AD2",
-		"GPMC_AD3",
-		"GPMC_AD4",
-		"GPMC_AD5",
-		"GPMC_AD6",
-		"GPMC_AD7",
-		"DCAN1_TX",
-		"DCAN1_RX",
-		"CONSOLE_RX",
-		"CONSOLE_TX",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"RGMII2_TCTL",
-		"RGMII2_RCTL",
-		"RGMII2_TD3",
-		"RGMII2_TD2",
-		"RGMII2_TD1",
-		"RGMII2_TD0",
-		"RGMII2_TCLK",
-		"RGMII2_RCLK",
-		"RGMII2_RD3",
-		"RGMII2_RD2",
-		"RGMII2_RD1",
-		"RGMII2_RD0",
-		"PMIC_INT1",
-		"GPMC_CSN0_Flash",
-		"MMC1_CLK",
-		"MMC1_CMD";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"GPMC_CSN3_BUS",
-		"GPMC_CLK",
-		"GPMC_ADVN_ALE",
-		"GPMC_OEN_RE_N",
-		"GPMC_WE_N",
-		"GPMC_BEN0_CLE",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"SW2_0",
-		"SW2_1",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"MMC0_DAT3",
-		"MMC0_DAT2",
-		"MMC0_DAT1",
-		"MMC0_DAT0",
-		"MMC0_CLK",
-		"MMC0_CMD";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"onrisc:red:power",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"WLAN_IRQ",
-		"WLAN_EN",
-		"SW2_2",
-		"SW2_3",
-		"NC",
-		"NC",
-		"NC",
-		"ModeA0",
-		"ModeA1",
-		"ModeA2",
-		"ModeA3",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC";
-};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
deleted file mode 100644
index 6ed886c3306be..0000000000000
--- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
+++ /dev/null
@@ -1,239 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "NetCom Plus";
-};
-
-&am33xx_pinmux {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)			/* RX */
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)			/* TX */
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* CTS */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* RTS */
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)		/* RX */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      		/* TX */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* CTS */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* RTS */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* DTR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DSR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DCD */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
-		>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&gpio0 {
-	gpio-line-names =
-		"MDIO",
-		"MDC",
-		"UART2_RX",
-		"UART2_TX",
-		"I2C1_SDA",
-		"I2C1_SCL",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"UART1_CTSN",
-		"UART1_RTSN",
-		"UART1_RX",
-		"UART1_TX",
-		"onrisc:blue:wlan",
-		"onrisc:green:app",
-		"USB0_DRVVBUS",
-		"ETH2_INT",
-		"NC",
-		"NC",
-		"MMC1_DAT0",
-		"MMC1_DAT1",
-		"NC",
-		"NC",
-		"MMC1_DAT2",
-		"MMC1_DAT3",
-		"NC",
-		"NC",
-		"GPMC_WAIT0",
-		"GPMC_WP_N";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"GPMC_AD0",
-		"GPMC_AD1",
-		"GPMC_AD2",
-		"GPMC_AD3",
-		"GPMC_AD4",
-		"GPMC_AD5",
-		"GPMC_AD6",
-		"GPMC_AD7",
-		"NC",
-		"NC",
-		"CONSOLE_RX",
-		"CONSOLE_TX",
-		"UART2_DTR",
-		"UART2_DSR",
-		"UART2_DCD",
-		"UART2_RI",
-		"RGMII2_TCTL",
-		"RGMII2_RCTL",
-		"RGMII2_TD3",
-		"RGMII2_TD2",
-		"RGMII2_TD1",
-		"RGMII2_TD0",
-		"RGMII2_TCLK",
-		"RGMII2_RCLK",
-		"RGMII2_RD3",
-		"RGMII2_RD2",
-		"RGMII2_RD1",
-		"RGMII2_RD0",
-		"PMIC_INT1",
-		"GPMC_CSN0_Flash",
-		"MMC1_CLK",
-		"MMC1_CMD";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"GPMC_CSN3_BUS",
-		"GPMC_CLK",
-		"GPMC_ADVN_ALE",
-		"GPMC_OEN_RE_N",
-		"GPMC_WE_N",
-		"GPMC_BEN0_CLE",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"SW2_0",
-		"SW2_1",
-		"NC",
-		"NC",
-		"UART1_DTR",
-		"UART1_DSR",
-		"UART1_DCD",
-		"UART1_RI",
-		"MMC0_DAT3",
-		"MMC0_DAT2",
-		"MMC0_DAT1",
-		"MMC0_DAT0",
-		"MMC0_CLK",
-		"MMC0_CMD";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"onrisc:red:power",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"UART2_CTSN",
-		"UART2_RTSN",
-		"WLAN_IRQ",
-		"WLAN_EN",
-		"SW2_2",
-		"SW2_3",
-		"NC",
-		"NC",
-		"NC",
-		"ModeA0",
-		"ModeA1",
-		"ModeA2",
-		"ModeA3",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC";
-};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
deleted file mode 100644
index ad3adc7679f98..0000000000000
--- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-
-/ {
-	model = "NetCom Plus";
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dip_switches>;
-
-	dip_switches: pinmux_dip_switches {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	tca6416_pins: pinmux_tca6416_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
-		>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&i2c1 {
-	tca6416a: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tca6416_pins>;
-		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
-				  "GP_IN4", "GP_IN5", "GP_IN6", "GP_IN7",
-				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
-				  "GP_OUT4", "GP_OUT5", "GP_OUT6", "GP_OUT7";
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tca6416b: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "CH1_M0", "CH1_M1", "CH1_M2", "CH1_M3",
-				  "CH2_M0", "CH2_M1", "CH2_M2", "CH2_M3",
-				  "CH3_M0", "CH3_M1", "CH3_M2", "CH3_M3",
-				  "CH4_M0", "CH4_M1", "CH4_M2", "CH4_M3";
-	};
-
-	tca6416c: gpio@21 {
-		compatible = "ti,tca6416";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "CH5_M0", "CH5_M1", "CH5_M2", "CH5_M3",
-				  "CH6_M0", "CH6_M1", "CH6_M2", "CH6_M3",
-				  "CH7_M0", "CH7_M1", "CH7_M2", "CH7_M3",
-				  "CH8_M0", "CH8_M1", "CH8_M2", "CH8_M3";
-	};
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&gpio0 {
-	gpio-line-names =
-		"MDIO",
-		"MDC",
-		"NC",
-		"NC",
-		"I2C1_SDA",
-		"I2C1_SCL",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"I2C2_SDA",
-		"I2C2_SCL",
-		"NC",
-		"NC",
-		"onrisc:blue:wlan",
-		"onrisc:green:app",
-		"USB0_DRVVBUS",
-		"ETH2_INT",
-		"NC",
-		"NC",
-		"MMC1_DAT0",
-		"MMC1_DAT1",
-		"NC",
-		"NC",
-		"MMC1_DAT2",
-		"MMC1_DAT3",
-		"NC",
-		"NC",
-		"GPMC_WAIT0",
-		"GPMC_WP_N";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"GPMC_AD0",
-		"GPMC_AD1",
-		"GPMC_AD2",
-		"GPMC_AD3",
-		"GPMC_AD4",
-		"GPMC_AD5",
-		"GPMC_AD6",
-		"GPMC_AD7",
-		"NC",
-		"NC",
-		"CONSOLE_RX",
-		"CONSOLE_TX",
-		"SW2_0_alt",
-		"SW2_1_alt",
-		"SW2_2_alt",
-		"SW2_3_alt",
-		"RGMII2_TCTL",
-		"RGMII2_RCTL",
-		"RGMII2_TD3",
-		"RGMII2_TD2",
-		"RGMII2_TD1",
-		"RGMII2_TD0",
-		"RGMII2_TCLK",
-		"RGMII2_RCLK",
-		"RGMII2_RD3",
-		"RGMII2_RD2",
-		"RGMII2_RD1",
-		"RGMII2_RD0",
-		"PMIC_INT1",
-		"GPMC_CSN0_Flash",
-		"MMC1_CLK",
-		"MMC1_CMD";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"GPMC_CSN3_BUS",
-		"GPMC_CLK",
-		"GPMC_ADVN_ALE",
-		"GPMC_OEN_RE_N",
-		"GPMC_WE_N",
-		"GPMC_BEN0_CLE",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"SW2_0",
-		"SW2_1",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"MMC0_DAT3",
-		"MMC0_DAT2",
-		"MMC0_DAT1",
-		"MMC0_DAT0",
-		"MMC0_CLK",
-		"MMC0_CMD";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"onrisc:red:power",
-		"NC",
-		"NC",
-		"NC",
-		"3G_PWR_EN",
-		"NC",
-		"NC",
-		"WLAN_IRQ",
-		"WLAN_EN",
-		"SW2_2",
-		"SW2_3",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC";
-};
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
deleted file mode 100644
index b2846cd220f04..0000000000000
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ /dev/null
@@ -1,434 +0,0 @@
-//SPDX-License-Identifier: GPL-2.0
-/* Copyright (C) 2018 Octavo Systems LLC - https://www.octavosystems.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-osd335x-common.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include <dt-bindings/display/tda998x.h>
-
-/ {
-	model = "Octavo Systems OSD3358-SM-RED";
-	compatible = "oct,osd3358-sm-refdesign", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
-};
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&lcdc {
-	status = "okay";
-
-	/* If you want to get 24 bit RGB and 16 BGR mode instead of
-	 * current 16 bit RGB and 24 BGR modes, set the propety
-	 * below to "crossed" and uncomment the video-ports -property
-	 * in tda19988 node.
-	 * AM335x errata for wiring:
-	 * https://www.ti.com/lit/er/sprz360i/sprz360i.pdf
-	 */
-
-	blue-and-red-wiring = "straight";
-
-	port {
-		lcdc_0: endpoint {
-			remote-endpoint = <&hdmi_0>;
-		};
-	};
-};
-
-&i2c0 {
-	tda19988: hdmi-encoder@70 {
-		compatible = "nxp,tda998x";
-		reg = <0x70>;
-
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
-		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-
-		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
-		/* video-ports = <0x234501>; */
-
-		#sound-dai-cells = <0>;
-		audio-ports = <	TDA998x_I2S	0x03>;
-
-		port {
-			hdmi_0: endpoint {
-				remote-endpoint = <&lcdc_0>;
-			};
-		};
-	};
-
-	mpu9250: imu@68 {
-		compatible = "invensense,mpu6050";
-		reg = <0x68>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
-		i2c-gate {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ax8975@c {
-				compatible = "asahi-kasei,ak8975";
-				reg = <0x0c>;
-			};
-		};
-		/*invensense,int_config = <0x10>;
-		invensense,level_shifter = <0>;
-		invensense,orientation = [01 00 00 00 01 00 00 00 01];
-		invensense,sec_slave_type = <0>;
-		invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
-	};
-
-	bmp280: pressure@76 {
-		compatible = "bosch,bmp280";
-		reg = <0x76>;
-	};
-};
-
-&mcasp0 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp0_pins>;
-	status = "okay";
-	op-mode = <0>;	/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 0
-		>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-/ {
-	clk_mcasp0_fixed: clk-mcasp0-fixed {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24576000>;
-	};
-
-	clk_mcasp0: clk-mcasp0 {
-		#clock-cells = <0>;
-		compatible = "gpio-gate-clock";
-		clocks = <&clk_mcasp0_fixed>;
-		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "TI BeagleBone Black";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink0_master>;
-		simple-audio-card,frame-master = <&dailink0_master>;
-
-		dailink0_master: simple-audio-card,cpu {
-			sound-dai = <&mcasp0>;
-			clocks = <&clk_mcasp0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&tda19988>;
-		};
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led2 {
-			label = "beaglebone:green:usr0";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led3 {
-			label = "beaglebone:green:usr1";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led4 {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led5 {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin>;
-
-	nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-		>;
-	};
-
-	mcasp0_pins: mcasp0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
-		>;
-	};
-
-	flash_enable: flash-enable {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* rmii1_ref_clk.gpio0_29 */
-		>;
-	};
-
-	imu_interrupt: imu-interrupt {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mii1_rx_er.gpio3_2 */
-		>;
-	};
-
-	ethernet_interrupt: ethernet-interrupt{
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mii1_col.gpio3_0 */
-		>;
-	};
-
-	user_leds_s0: user-leds-s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-		>;
-	};
-
-	i2c2_pins: pinmux-i2c2-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
-		>;
-	};
-
-	uart0_pins: pinmux-uart0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	clkout2_pin: pinmux-clkout2-pin {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	cpsw_default: cpsw-default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* mii1_rxdv.rgmii1_rctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
-		>;
-	};
-
-	cpsw_sleep: cpsw-sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci-mdio-default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci-mdio-sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux-mmc1-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	emmc_pins: pinmux-emmc-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-};
-
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "peripheral";
-	interrupts-extended = <&intc 18 &tps 0>;
-	interrupt-names = "mc", "vbus";
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	ethphy0: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <0x4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&rtc {
-	system-power-controller;
-	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-	clock-names = "ext-clk", "int-clk";
-};
diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
deleted file mode 100644
index 2888b15999ee6..0000000000000
--- a/arch/arm/boot/dts/am335x-osd335x-common.dtsi
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Author: Robert Nelson <robertcnelson@gmail.com>
- */
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-};
-
-&cpu0_opp_table {
-	/*
-	* Octavo Systems:
-	* The EFUSE_SMA register is not programmed for any of the AM335x wafers
-	* we get and we are not programming them during our production test.
-	* Therefore, from a DEVICE_ID revision point of view, the silicon looks
-	* like it is Revision 2.1.  However, from an EFUSE_SMA point of view for
-	* the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
-	* EFUSE_SMA register reads as all zeros).
-	*/
-	oppnitro-1000000000 {
-		opp-supported-hw = <0x06 0x0100>;
-	};
-};
-
-&am33xx_pinmux {
-	i2c0_pins: pinmux-i2c0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	interrupts = <7>; /* NMI */
-	interrupt-parent = <&intc>;
-
-	ti,pmic-shutdown-controller;
-
-	pwrbutton {
-		interrupts = <2>;
-		status = "okay";
-	};
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-name = "vdds_dpr";
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1351500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "vio,vrtc,vdds";
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "vdd_3v3aux";
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-name = "vdd_1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-name = "vdd_3v3a";
-			regulator-always-on;
-		};
-	};
-};
-
-&aes {
-	status = "okay";
-};
-
-&sham {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
deleted file mode 100644
index 67c7fcc52ce6d..0000000000000
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ /dev/null
@@ -1,236 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-2017 Phytec Messtechnik GmbH
- * Author: Wadim Egorov <w.egorov@phytec.de>
- *	   Teresa Remmet <t.remmet@phytec.de>
- */
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Phytec AM335x PCM-953";
-	compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
-
-	/* Power */
-	vcc3v3: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
-	vcc1v8: fixedregulator2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-	};
-
-	/* User IO */
-	user_leds: user-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_pins>;
-
-		user-led0 {
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		user-led1 {
-			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-	};
-
-	user_buttons: user-buttons {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_buttons_pins>;
-
-		button-0 {
-			label = "home";
-			linux,code = <KEY_HOME>;
-			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
-			wakeup-source;
-		};
-
-		button-1 {
-			label = "menu";
-			linux,code = <KEY_MENU>;
-			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
-			wakeup-source;
-		};
-
-	};
-};
-
-&am33xx_pinmux {
-	user_buttons_pins: pinmux-user-buttons {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* emu0.gpio3_7 */
-			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* emu1.gpio3_8 */
-		>;
-	};
-
-	user_leds_pins: pinmux-user-leds {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn1.gpio1_30 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn2.gpio1_31 */
-		>;
-	};
-};
-
-/* CAN */
-&am33xx_pinmux {
-	dcan1_pins: pinmux-dcan1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart1_rxd.dcan1_tx_mux2 */
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart1_txd.dcan1_rx_mux2 */
-		>;
-	};
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-	status = "okay";
-};
-
-/* Ethernet */
-&am33xx_pinmux {
-	ethernet1_pins: pinmux_ethernet1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-		>;
-	};
-};
-
-&cpsw_port2 {
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	phy1: ethernet-phy@2 {
-		reg = <2>;
-	};
-};
-
-&mac_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-};
-
-/* Misc */
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cb_gpio_pins>;
-
-	cb_gpio_pins: pinmux-cb-gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* uart0_ctsn.gpio1_8 */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* uart0_rtsn.gpio1_9 */
-		>;
-	};
-};
-
-/* MMC */
-&am33xx_pinmux {
-	mmc1_pins: pinmux-mmc1-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
-		>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vcc3v3>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-/* UARTs */
-&am33xx_pinmux {
-	uart0_pins: pinmux-uart0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart1_pins: pinmux-uart1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart2_pins: pinmux-uart2 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
-		>;
-	};
-
-	uart3_pins: pinmux-uart3 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxd3.uart3_rxd */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rxd2.uart3_txd */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	status = "okay";
-};
-
-/* USB */
-&usb1 {
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
deleted file mode 100644
index ce6cc2b96654f..0000000000000
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ /dev/null
@@ -1,573 +0,0 @@
-/*
- * pdu001.dts
- *
- * EETS GmbH PDU001 board device tree file
- *
- * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
- *
- * SPDX-License-Identifier:  GPL-2.0+
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/leds/leds-pca9532.h>
-
-/ {
-	model = "EETS,PDU001";
-	compatible = "ti,am33xx";
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-		regulator-boot-on;
-	};
-
-	lis3_reg: fixedregulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lis3_reg";
-		regulator-boot-on;
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins_s0>;
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <16>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-
-		display-timings {
-			240x320p16 {
-				clock-frequency = <6500000>;
-				hactive = <240>;
-				vactive = <320>;
-				hfront-porch = <6>;
-				hback-porch = <6>;
-				hsync-len = <1>;
-				vback-porch = <6>;
-				vfront-porch = <6>;
-				vsync-len = <1>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				pixelclk-active = <1>;
-				de-active = <0>;
-			};
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin>;
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_d1.i2c1_sda */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_cs0.i2c1_scl */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_clk.i2c2_sda */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_d0.i2c2_scl */
-		>;
-	};
-
-	spi1_pins: pinmux_spi1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT, MUX_MODE3)		/* mcasp0_aclkx.spi1_sclk */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT, MUX_MODE3)		/* mcasp0_fsx.spi1_d0 */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* mcasp0_axr0.spi1_d1 */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT, MUX_MODE3)		/* mcasp0_ahclkr.spi1_cs0 */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE1)	/* spi0_cs1.uart3_rxd */
-			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* ecap0_in_pwm0_out.uart3_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Port 1 (emac0) */
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT, MUX_MODE0)
-
-			/* Port 2 (emac1) */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* mii2_txen.gpmc_a0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT, MUX_MODE1)		/* mii2_rxdv.gpmc_a1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1)		/* mii2_txd3.gpmc_a2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1)		/* mii2_txd2.gpmc_a3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1)		/* mii2_txd1.gpmc_a4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1)		/* mii2_txd0.gpmc_a5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT, MUX_MODE1)		/* mii2_txclk.gpmc_a6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT, MUX_MODE1)		/* mii2_rxclk.gpmc_a7 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE1)		/* mii2_rxd3.gpmc_a8 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE1)		/* mii2_rxd2.gpmc_a9 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE1)		/* mii2_rxd1.gpmc_a10 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE1)		/* mii2_rxd0.gpmc_a11 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT, MUX_MODE1)		/* mii2_crs.gpmc_wait0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT, MUX_MODE1)		/* mii2_rxer.gpmc_wpn */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT, MUX_MODE1)		/* mii2_col.gpmc_ben1 */
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		/* eMMC */
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		/* SD cardcage */
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			/* card change signal for frontpanel SD cardcage */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT, MUX_MODE7)		/* gpmc_advn_ale.gpio2_2 */
-		>;
-	};
-
-	lcd_pins_s0: lcd_pins_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	dcan0_pins: pinmux_dcan0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	rs485-rts-delay = <0 0>;
-	linux,rs485-enabled-at-boot-time;
-
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-
-	m2_eeprom: m2_eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-		status = "okay";
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <100000>;
-
-	board_24aa025e48: board_24aa025e48@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-	};
-
-	backplane_24aa025e48: backplane_24aa025e48@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-	};
-
-	pca9532: pca9532@60 {
-		compatible = "nxp,pca9532";
-		reg = <0x60>;
-		psc0 = <0x97>;
-		pwm0 = <0x80>;
-		psc1 = <0x97>;
-		pwm1 = <0x10>;
-
-		run.red@0 {
-			type = <PCA9532_TYPE_LED>;
-		};
-		run.green@1 {
-			type = <PCA9532_TYPE_LED>;
-			default-state = "on";
-		};
-		s2.red@2 {
-			type = <PCA9532_TYPE_LED>;
-		};
-		s2.green@3 {
-			type = <PCA9532_TYPE_LED>;
-		};
-		s1.yellow@4 {
-			type = <PCA9532_TYPE_LED>;
-		};
-		s1.green@5 {
-			type = <PCA9532_TYPE_LED>;
-		};
-	};
-
-	pca9530: pca9530@61 {
-		compatible = "nxp,pca9530";
-		reg = <0x61>;
-
-		tft-panel@0 {
-			type = <PCA9532_TYPE_LED>;
-			linux,default-trigger = "backlight";
-			default-state = "on";
-		};
-	};
-
-	mcp79400: rtc@6f {
-		compatible = "microchip,mcp7940x";
-		reg = <0x6f>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-	ti,pindir-d0-out-d1-in;
-	status = "okay";
-
-	display-controller@0 {
-		compatible = "orisetech,otm3225a";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		// SPI mode 3
-		spi-cpol;
-		spi-cpha;
-		status = "okay";
-	};
-};
-
-/*
- * Disable soc's rtc as we have no VBAT for it. This makes the board
- * rtc (Microchip MCP79400) the default rtc device 'rtc0'.
- */
-&rtc {
-	status = "disabled";
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&elm {
-	status = "okay";
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-name = "ldo_vrtc";
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-name = "buck_vdd_ddr";
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits */
-			regulator-name = "buck_vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits */
-			regulator-name = "buck_vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-name = "boost_res";
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-name = "ldo_vdig1";
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-name = "ldo_vdig2";
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-name = "ldo_vpll";
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-name = "ldo_vdac";
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-name = "ldo_vaux1";
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-name = "ldo_vaux2";
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-name = "ldo_vaux33";
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-name = "ldo_vmmc";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vbb_reg: regulator@13 {
-			regulator-name = "bat_vbb";
-		};
-	};
-};
-
-&mac_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cpsw_default>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&davinci_mdio_default>;
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "mii";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "mii";
-	ti,dual-emac-pvid = <2>;
-};
-
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x01 0x10 0x22 0x33>;
-		ti,charge-delay = <0x400>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	non-removable;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&dcan0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan0_pins>;
-};
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
deleted file mode 100644
index a4509e9e1056c..0000000000000
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ /dev/null
@@ -1,637 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
- */
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "am33xx.dtsi"
-
-/ {
-	model = "Gumstix Pepper";
-	compatible = "gumstix,am335x-pepper", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc3_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	buttons: user_buttons {
-		compatible = "gpio-keys";
-	};
-
-	leds: user_leds {
-		compatible = "gpio-leds";
-	};
-
-	panel: lcd_panel {
-		compatible = "ti,tilcdc,panel";
-	};
-
-	sound: sound_iface {
-		compatible = "ti,da830-evm-audio";
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-	};
-
-	v3v3c_reg: fixedregulator1 {
-		compatible = "regulator-fixed";
-	};
-
-	vdd5_reg: fixedregulator2 {
-		compatible = "regulator-fixed";
-	};
-};
-
-/* I2C Busses */
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-
-	audio_codec: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		ai3x-micbias-vg = <0x2>;
-	};
-
-	accel: lis331dlh@1d {
-		compatible = "st,lis3lv02d";
-		reg = <0x1d>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-};
-
-&am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-	i2c1_pins: pinmux_i2c1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE3)	/* mii1_crs,i2c1_sda */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
-		>;
-	};
-};
-
-/* Accelerometer */
-&accel {
-	pinctrl-names = "default";
-	pinctrl-0 = <&accel_pins>;
-
-	Vdd-supply = <&ldo3_reg>;
-	Vdd_IO-supply = <&ldo3_reg>;
-	st,irq1-click;
-	st,wakeup-x-lo;
-	st,wakeup-x-hi;
-	st,wakeup-y-lo;
-	st,wakeup-y-hi;
-	st,wakeup-z-lo;
-	st,wakeup-z-hi;
-	st,min-limit-x = <92>;
-	st,max-limit-x = <14>;
-	st,min-limit-y = <14>;
-	st,max-limit-y = <92>;
-	st,min-limit-z = <92>;
-	st,max-limit-z = <14>;
-};
-
-&am33xx_pinmux {
-	accel_pins: pinmux_accel {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT, MUX_MODE7)   /* gpmc_wen.gpio2_4 */
-		>;
-	};
-};
-
-/* Audio */
-&audio_codec {
-	status = "okay";
-
-	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-	AVDD-supply = <&ldo3_reg>;
-	IOVDD-supply = <&ldo3_reg>;
-	DRVDD-supply = <&ldo3_reg>;
-	DVDD-supply = <&dcdc1_reg>;
-};
-
-&sound {
-	ti,model = "AM335x-EVM";
-	ti,audio-codec = <&audio_codec>;
-	ti,mcasp-controller = <&mcasp0>;
-	ti,codec-clock-rate = <12000000>;
-	ti,audio-routing =
-		"Headphone Jack",	"HPLOUT",
-		"Headphone Jack",	"HPROUT",
-		"MIC3L",		"Mic3L Switch";
-};
-
-&mcasp0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&audio_pins>;
-
-	op-mode = <0>;	/* MCASP_ISS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <
-		1 2 0 0
-		0 0 0 0
-		0 0 0 0
-		0 0 0 0
-	>;
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
-};
-
-&am33xx_pinmux {
-	audio_pins: pinmux_audio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a0.gpio1_16 */
-		>;
-	};
-};
-
-/* Display: 24-bit LCD Screen */
-&panel {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_pins>;
-	panel-info {
-		ac-bias = <255>;
-		ac-bias-intrpt = <0>;
-		dma-burst-sz = <16>;
-		bpp = <32>;
-		fdd = <0x80>;
-		sync-edge = <0>;
-		sync-ctrl = <1>;
-		raster-order = <0>;
-		fifo-th = <0>;
-	};
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 480x272 {
-			clock-frequency = <18400000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <8>;
-			hback-porch = <4>;
-			hsync-len = <41>;
-			vfront-porch = <4>;
-			vback-porch = <2>;
-			vsync-len = <10>;
-			hsync-active = <1>;
-			vsync-active = <1>;
-		};
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	lcd_pins: pinmux_lcd {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
-			/* Display Enable */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-		>;
-	};
-};
-
-/* Ethernet */
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
-	ti,dual-emac-pvid = <2>;
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&mac_sw {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet_pins>;
-};
-
-&am33xx_pinmux {
-	ethernet_pins: pinmux_ethernet {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE2)
-			/* ethernet interrupt */
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
-			/* ethernet PHY nReset */
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* mii1_col.gpio3_0 */
-		>;
-	};
-
-	mdio_pins: pinmux_mdio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-};
-
-/* MMC */
-&mmc1 {
-	/* Bootable SD card slot */
-	status = "okay";
-	vmmc-supply = <&ldo3_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&mmc2 {
-	/* eMMC (not populated) on MMC #2 */
-	status = "disabled";
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	vmmc-supply = <&ldo3_reg>;
-	bus-width = <8>;
-	non-removable;
-};
-
-&mmc3 {
-	/* Wifi & Bluetooth on MMC #3 */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&wireless_pins>;
-	vmmmc-supply = <&v3v3c_reg>;
-	bus-width = <4>;
-	non-removable;
-	dmas = <&edma_xbar 12 0 1
-		&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-};
-
-
-&am33xx_pinmux {
-	sd_pins: pinmux_sd_card {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* spi0_cs1.gpio0_6 */
-		>;
-	};
-	emmc_pins: pinmux_emmc {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
-			/* EMMC nReset */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-		>;
-	};
-	wireless_pins: pinmux_wireless {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc1_clk */
-			/* WLAN nReset */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-			/* WLAN nPower down */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			/* 32kHz Clock */
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-};
-
-/* Power */
-&vbat {
-	regulator-name = "vbat";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-};
-
-&v3v3c_reg {
-	regulator-name = "v3v3c_reg";
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	vin-supply = <&vbat>;
-};
-
-&vdd5_reg {
-	regulator-name = "vdd5_reg";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-	vin-supply = <&vbat>;
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	backlight {
-		isel = <1>; /* ISET1 */
-		fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
-		default-brightness = <80>;
-	};
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			/* VDD_1V8 system supply */
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			/* VRTC 1.8V always-on supply */
-			regulator-name = "vrtc,vdds";
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			/* 3.3V rail */
-			regulator-name = "vdd_3v3aux";
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			/* VDD_3V3A 3.3V rail */
-			regulator-name = "vdd_3v3a";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		ldo4_reg: regulator@6 {
-			/* VDD_3V3B 3.3V rail */
-			regulator-name = "vdd_3v3b";
-			regulator-always-on;
-		};
-	};
-};
-
-/* SPI Busses */
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-};
-
-&am33xx_pinmux {
-	spi0_pins: pinmux_spi0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-};
-
-/* Touch Screen */
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-/* UARTs */
-&uart0 {
-	/* Serial Console */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&uart1 {
-	/* Broken out to J6 header */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-	uart1_pins: pinmux_uart1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-};
-
-/* USB */
-&usb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb_pins>;
-};
-
-&usb0 {
-	dr_mode = "host";
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&am33xx_pinmux {
-	usb_pins: pinmux_usb {
-		pinctrl-single,pins = <
-			/* USB0 Over-Current (active low) */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			/* USB1 Over-Current (active low) */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-		>;
-	};
-};
-
-/* User IO */
-&leds {
-	pinctrl-names = "default";
-	pinctrl-0 = <&user_leds_pins>;
-
-	led0 {
-		label = "pepper:user0:blue";
-		gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		linux,default-trigger = "none";
-		default-state = "off";
-	};
-
-	led1 {
-		label = "pepper:user1:red";
-		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-		linux,default-trigger = "none";
-		default-state = "off";
-	};
-};
-
-&buttons {
-	pinctrl-names = "default";
-	pinctrl-0 = <&user_buttons_pins>;
-
-	button-0 {
-		label = "home";
-		linux,code = <KEY_HOME>;
-		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-		wakeup-source;
-	};
-
-	button-1 {
-		label = "menu";
-		linux,code = <KEY_MENU>;
-		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-		wakeup-source;
-	};
-
-	button-2 {
-		label = "power";
-		linux,code = <KEY_POWER>;
-		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		wakeup-source;
-	};
-};
-
-&am33xx_pinmux {
-	user_leds_pins: pinmux_user_leds {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a4.gpio1_20 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-		>;
-	};
-
-	user_buttons_pins: pinmux_user_buttons {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a7.gpio1_21 */
-			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio0_7 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-phycore-rdk.dts b/arch/arm/boot/dts/am335x-phycore-rdk.dts
deleted file mode 100644
index 43907d03e6759..0000000000000
--- a/arch/arm/boot/dts/am335x-phycore-rdk.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 PHYTEC Messtechnik GmbH
- * Author: Wadim Egorov <w.egorov@phytec.de>
- */
-
-/dts-v1/;
-
-#include "am335x-phycore-som.dtsi"
-#include "am335x-pcm-953.dtsi"
-
-/* SoM */
-&gpmc {
-	status = "okay";
-};
-
-&i2c_eeprom {
-	status = "okay";
-};
-
-&i2c_rtc {
-	status = "okay";
-};
-
-&serial_flash {
-	status = "okay";
-
-};
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
deleted file mode 100644
index 034dc51816794..0000000000000
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ /dev/null
@@ -1,343 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 Phytec Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet@phytec.de>
- */
-
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Phytec AM335x phyCORE";
-	compatible = "phytec,am335x-phycore-som", "ti,am33xx";
-
-	aliases {
-		rtc0 = &i2c_rtc;
-		rtc1 = &rtc;
-		rtc2 = &tps;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	vcc5v: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-/* Crypto Module */
-&aes {
-	status = "okay";
-};
-
-&sham {
-	status = "okay";
-};
-
-/* EMMC */
-&am33xx_pinmux {
-	emmc_pins: pinmux-emmc-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <8>;
-	non-removable;
-	status = "disabled";
-};
-
-/* Ethernet */
-&am33xx_pinmux {
-	ethernet0_pins: pinmux_ethernet0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	mdio_pins: pinmux_mdio {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&phy0>;
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&mac_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet0_pins>;
-	status = "okay";
-};
-
-/* I2C Busses */
-&am33xx_pinmux {
-	i2c0_pins: pinmux-i2c0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
-		>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	tps: pmic@2d {
-		reg = <0x2d>;
-	};
-
-	i2c_tmp102: temp@4b {
-		compatible = "ti,tmp102";
-		reg = <0x4b>;
-		status = "disabled";
-	};
-
-	i2c_eeprom: eeprom@52 {
-		compatible = "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-		status = "disabled";
-	};
-
-	i2c_rtc: rtc@68 {
-		compatible = "microcrystal,rv4162";
-		reg = <0x68>;
-		status = "disabled";
-	};
-};
-
-/* NAND memory */
-&am33xx_pinmux {
-		nandflash_pins: pinmux-nandflash {
-			pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "disabled";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-	ranges = <0 0 0x08000000 0x1000000>;   /* CS0: NAND */
-	nandflash: nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		nand-bus-width = <8>;
-		ti,nand-ecc-opt = "bch8";
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <30>;
-		gpmc,cs-wr-off-ns = <30>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <30>;
-		gpmc,adv-wr-off-ns = <30>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <20>;
-		gpmc,oe-on-ns = <10>;
-		gpmc,oe-off-ns = <30>;
-		gpmc,access-ns = <30>;
-		gpmc,rd-cycle-ns = <30>;
-		gpmc,wr-cycle-ns = <30>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <50>;
-		gpmc,cycle2cycle-diffcsen;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <30>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		ti,elm-id = <&elm>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-/* Power */
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vcc5v>;
-	vcc2-supply = <&vcc5v>;
-	vcc3-supply = <&vcc5v>;
-	vcc4-supply = <&vcc5v>;
-	vcc5-supply = <&vcc5v>;
-	vcc6-supply = <&vcc5v>;
-	vcc7-supply = <&vcc5v>;
-	vccio-supply = <&vcc5v>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-name = "vdig1_1p8v";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-/* SPI Busses */
-&am33xx_pinmux {
-	spi0_pins: pinmux-spi0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	status = "okay";
-
-	serial_flash: flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <48000000>;
-		reg = <0x0>;
-		m25p,fast-read;
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
deleted file mode 100644
index 0ba4883cd4eff..0000000000000
--- a/arch/arm/boot/dts/am335x-pocketbeagle.dts
+++ /dev/null
@@ -1,484 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Author: Robert Nelson <robertcnelson@gmail.com>
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-osd335x-common.dtsi"
-
-/ {
-	model = "TI AM335x PocketBeagle";
-	compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx";
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&usr_leds_pins>;
-
-		compatible = "gpio-leds";
-
-		led-usr0 {
-			label = "beaglebone:green:usr0";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led-usr1 {
-			label = "beaglebone:green:usr1";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led-usr2 {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led-usr3 {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&gpio0 {
-	gpio-line-names =
-		"NC",
-		"NC",
-		"P1.08 [SPI0_CLK]",
-		"P1.10 [SPI0_MISO]",
-		"P1.12 [SPI0_MOSI]",
-		"P1.06 [SPI0_CS]",
-		"[MMC0_CD]",
-		"P2.29 [SPI1_CLK]",
-		"[SYSBOOT 12]",
-		"[SYSBOOT 13]",
-		"[SYSBOOT 14]",
-		"[SYSBOOT 15]",
-		"P1.26 [I2C2_SDA]",
-		"P1.28 [I2C2_SCL]",
-		"P2.11 [I2C1_SDA]",
-		"P2.09 [I2C1_SCL]",
-		"NC",
-		"NC",
-		"NC",
-		"P2.31 [SPI1_CS]",
-		"P1.20 [PRU0.16]",
-		"NC",
-		"NC",
-		"P2.03",
-		"NC",
-		"NC",
-		"P1.34",
-		"P2.19",
-		"NC",
-		"NC",
-		"P2.05 [UART4_RX]",
-		"P2.07 [UART4_TX]";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"P2.25 [SPI1_MOSI]",
-		"P1.32 [UART0_RX]",
-		"P1.30 [UART0_TX]",
-		"P2.24",
-		"P2.33",
-		"P2.22",
-		"P2.18",
-		"NC",
-		"NC",
-		"P2.01 [PWM1A]",
-		"NC",
-		"P2.10",
-		"[USR LED 0]",
-		"[USR LED 1]",
-		"[USR LED 2]",
-		"[USR LED 3]",
-		"P2.06",
-		"P2.04",
-		"P2.02",
-		"P2.08",
-		"NC",
-		"NC",
-		"NC";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"P2.20",
-		"P2.17",
-		"NC",
-		"NC",
-		"NC",
-		"[EEPROM_WP]",
-		"[SYSBOOT 0]",
-		"[SYSBOOT 1]",
-		"[SYSBOOT 2]",
-		"[SYSBOOT 3]",
-		"[SYSBOOT 4]",
-		"[SYSBOOT 5]",
-		"[SYSBOOT 6]",
-		"[SYSBOOT 7]",
-		"[SYSBOOT 8]",
-		"[SYSBOOT 9]",
-		"[SYSBOOT 10]",
-		"[SYSBOOT 11]",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"P2.35 [AIN5]",
-		"P1.02 [AIN6]",
-		"P1.35 [PRU1.10]",
-		"P1.04 [PRU1.11]",
-		"[MMC0_DAT3]",
-		"[MMC0_DAT2]",
-		"[MMC0_DAT1]",
-		"[MMC0_DAT0]",
-		"[MMC0_CLK]",
-		"[MMC0_CMD]";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"[I2C0_SDA]",
-		"[I2C0_SCL]",
-		"[JTAG EMU0]",
-		"[JTAG EMU1]",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"P1.03 [USB1]",
-		"P1.36 [PWM0A]",
-		"P1.33 [PRU0.1]",
-		"P2.32 [PRU0.2]",
-		"P2.30 [PRU0.3]",
-		"P1.31 [PRU0.4]",
-		"P2.34 [PRU0.5]",
-		"P2.28 [PRU0.6]",
-		"P1.29 [PRU0.7]",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC";
-};
-
-&am33xx_pinmux {
-
-	compatible = "pinconf-single";
-	pinctrl-names = "default";
-
-	pinctrl-0 =   < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio
-			&P2_33_gpio &P2_22_gpio &P2_18_gpio &P2_10_gpio
-			&P2_06_gpio &P2_04_gpio &P2_02_gpio &P2_08_gpio
-			&P2_17_gpio >;
-
-	/* P2_03 (ZCZ ball T10) gpio0_23 0x824 PIN 9 */
-	P2_03_gpio: pinmux_P2_03_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P1_34 (ZCZ ball T11) gpio0_26 0x828 PIN 10 */
-	P1_34_gpio: pinmux_P1_34_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_19 (ZCZ ball U12) gpio0_27 0x82c PIN 11 */
-	P2_19_gpio: pinmux_P2_19_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_24 (ZCZ ball T12) gpio1_12 0x830 PIN 12 */
-	P2_24_gpio: pinmux_P2_24_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_33 (ZCZ ball R12) gpio1_13 0x834 PIN 13 */
-	P2_33_gpio: pinmux_P2_33_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_22 (ZCZ ball V13) gpio1_14 0x838 PIN 14 */
-	P2_22_gpio: pinmux_P2_22_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_18 (ZCZ ball U13) gpio1_15 0x83c PIN 15 */
-	P2_18_gpio: pinmux_P2_18_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_10 (ZCZ ball R14) gpio1_20 0x850 PIN 20 */
-	P2_10_gpio: pinmux_P2_10_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_06 (ZCZ ball U16) gpio1_25 0x864 PIN 25 */
-	P2_06_gpio: pinmux_P2_06_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_04 (ZCZ ball T16) gpio1_26 0x868 PIN 26 */
-	P2_04_gpio: pinmux_P2_04_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_02 (ZCZ ball V17) gpio1_27 0x86c PIN 27 */
-	P2_02_gpio: pinmux_P2_02_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_08 (ZCZ ball U18) gpio1_28 0x878 PIN 30 */
-	P2_08_gpio: pinmux_P2_08_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x00  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x00  0x00  0x10  0x18>;
-	};
-
-	/* P2_17 (ZCZ ball V12) gpio2_1 0x88c PIN 35 */
-	P2_17_gpio: pinmux_P2_17_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	i2c2_pins: pinmux-i2c2-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
-		>;
-	};
-
-	ehrpwm0_pins: pinmux-ehrpwm0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (A13) mcasp0_aclkx.ehrpwm0A */
-		>;
-	};
-
-	ehrpwm1_pins: pinmux-ehrpwm1-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* (U14) gpmc_a2.ehrpwm1A */
-		>;
-	};
-
-	mmc0_pins: pinmux-mmc0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	spi0_pins: pinmux-spi0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	spi1_pins: pinmux-spi1-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4)	/* (C18) eCAP0_in_PWM0_out.spi1_sclk */
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4)	/* (E18) uart0_ctsn.spi1_d0 */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4)	/* (E17) uart0_rtsn.spi1_d1 */
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE4)	/* (A15) xdma_event_intr0.spi1_cs1 */
-		>;
-	};
-
-	usr_leds_pins: pinmux-usr-leds-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)		/* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)		/* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7)		/* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7)		/* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
-		>;
-	};
-
-	uart0_pins: pinmux-uart0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart4_pins: pinmux-uart4-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* (U17) gpmc_wpn.uart4_txd */
-		>;
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ehrpwm0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ehrpwm0_pins>;
-};
-
-&epwmss1 {
-	status = "okay";
-};
-
-&ehrpwm1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ehrpwm1_pins>;
-};
-
-&i2c0 {
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&rtc {
-	system-power-controller;
-};
-
-&tscadc {
-	status = "okay";
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6 7>;
-		ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
-		ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>;
-		ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "otg";
-};
-
-&usb1 {
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/am335x-regor-rdk.dts b/arch/arm/boot/dts/am335x-regor-rdk.dts
deleted file mode 100644
index 66a1360b83d5f..0000000000000
--- a/arch/arm/boot/dts/am335x-regor-rdk.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019 Phytec Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet@phytec.de>
- *
- */
-
-/dts-v1/;
-
-#include "am335x-phycore-som.dtsi"
-#include "am335x-regor.dtsi"
-
-/* SoM */
-&gpmc {
-	status = "okay";
-};
-
-&i2c_eeprom {
-	status = "okay";
-};
-
-&serial_flash {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi
deleted file mode 100644
index 3894f14a914cf..0000000000000
--- a/arch/arm/boot/dts/am335x-regor.dtsi
+++ /dev/null
@@ -1,201 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019 Phytec Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet@phytec.de>
- *
- */
-
-/ {
-	model = "Phytec AM335x phyBOARD-REGOR";
-	compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx";
-
-	vcc3v3: fixedregulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
-	/* User IO */
-	user_leds: user-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_pins>;
-
-		run_stop-led {
-			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "off";
-		};
-
-		error-led {
-			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "off";
-		};
-	};
-};
-
-/* User Leds */
-&am33xx_pinmux {
-	user_leds_pins: pinmux-user-leds {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* lcd_hsync.gpio2_22 */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_fsx.gpio3_15 */
-		>;
-	};
-};
-
-/* CAN Busses */
-&am33xx_pinmux {
-	dcan1_pins: pinmux-dcan1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart0_ctsn.d_can1_tx */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart0_rtsn.d_can1_rx */
-		>;
-	};
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-	status = "okay";
-};
-
-/* Ethernet */
-&am33xx_pinmux {
-	ethernet1_pins: pinmux-ethernet1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a6.mii2_txclk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1)	 /* gpmc_a9.mii2_rxd2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_ben1.mii2_col */
-		>;
-	};
-};
-
-&cpsw_port2 {
-	status = "okay";
-	phy-handle = <&phy1>;
-	phy-mode = "mii";
-	ti,dual-emac-pvid = <2>;
-};
-
-&davinci_mdio_sw {
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&mac_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-};
-
-/* GPIOs */
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&user_gpios_pins>;
-
-	user_gpios_pins: pinmux-user-gpios {
-		pinctrl-single,pins = <
-			/* DIGIN 1-4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7)		/* gpmc_ad11.gpio0_27 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT, MUX_MODE7)		/* gpmc_ad10.gpio0_26 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT, MUX_MODE7)		/* gpmc_ad9.gpio0_23 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT, MUX_MODE7)		/* gpmc_ad8.gpio0_22 */
-			/* DIGOUT 1-4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad15.gpio1_15 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad14.gpio1_14 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad13.gpio1_13 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad12.gpio1_12 */
-		>;
-	};
-};
-
-/* MMC */
-&am33xx_pinmux {
-	mmc1_pins: pinmux-mmc1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
-		>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vcc3v3>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-/* RTC */
-&i2c_rtc {
-	status = "okay";
-};
-
-/* UARTs */
-&am33xx_pinmux {
-	uart0_pins: pinmux-uart0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart2_pins: pinmux-uart2 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-/* RS485 - UART1 */
-&am33xx_pinmux {
-	uart1_rs485_pins: pinmux-uart1-rs485-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_rs485_pins>;
-	status = "okay";
-	linux,rs485-enabled-at-boot-time;
-};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
deleted file mode 100644
index f9b7e774ac48d..0000000000000
--- a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-&am33xx_pinmux {
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	usb_hub_ctrl: usb_hub_ctrl {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)     /* rmii1_refclk.gpio0_29 */
-		>;
-	};
-};
-
-&mac_sw {
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-};
-
-&cpsw_port1 {
-	phy-mode = "rgmii-id";
-};
-
-&i2c0 {
-	usb2512b: usb-hub@2c {
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb_hub_ctrl>;
-		compatible = "microchip,usb2512b";
-		reg = <0x2c>;
-		reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts
deleted file mode 100644
index a2676d10c24af..0000000000000
--- a/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2021 Sancloud Ltd
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-#include "am335x-boneblack-common.dtsi"
-#include "am335x-sancloud-bbe-common.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "SanCloud BeagleBone Enhanced Extended WiFi";
-	compatible = "sancloud,am335x-boneenhanced",
-		     "ti,am335x-bone-black",
-		     "ti,am335x-bone",
-		     "ti,am33xx";
-
-	wlan_en_reg: fixedregulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-	};
-};
-
-&am33xx_pinmux {
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			/* gpmc_a9.gpio1_25: RADIO_EN */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_OUTPUT_PULLUP, MUX_MODE7)
-
-			/* gpmc_ad12.mmc2_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)
-
-			/* gpmc_ad13.mmc2_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)
-
-			/* gpmc_ad14.mmc2_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)
-
-			/* gpmc_ad15.mmc2_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)
-
-			/* gpmc_csn3.mmc2_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)
-
-			/* gpmc_clk.mmc2_clk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)
-		>;
-	};
-
-	bluetooth_pins: pinmux_bluetooth_pins {
-		pinctrl-single,pins = <
-			/* event_intr0.gpio0_19 */
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			/* uart1_rxd */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-
-			/* uart1_txd */
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
-
-			/* uart1_ctsn */
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-
-			/* uart1_rtsn */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-};
-
-&i2c2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "okay";
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	non-removable;
-	cap-power-off-card;
-	ti,needs-special-hs-handling;
-	keep-power-in-suspend;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins>;
-	dmas = <&edma_xbar 12 0 1
-		&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-	clock-frequency = <50000000>;
-	max-frequency = <50000000>;
-};
-
-&uart1 {
-	status = "okay";
-
-	bluetooth {
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart1_pins &bluetooth_pins>;
-		compatible = "qcom,qca6174-bt";
-		enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-		clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts
deleted file mode 100644
index d6ef19311a914..0000000000000
--- a/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- * Copyright (C) 2021 SanCloud Ltd
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-#include "am335x-boneblack-common.dtsi"
-#include "am335x-sancloud-bbe-common.dtsi"
-
-/ {
-	model = "SanCloud BeagleBone Enhanced Lite";
-	compatible = "sancloud,am335x-boneenhanced",
-		     "ti,am335x-bone-black",
-		     "ti,am335x-bone",
-		     "ti,am33xx";
-};
-
-&am33xx_pinmux {
-	bb_spi0_pins: pinmux_bb_spi0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE0)
-		>;
-	};
-};
-
-&spi0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&bb_spi0_pins>;
-
-	channel@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		compatible = "micron,spi-authenta";
-
-		reg = <0>;
-		spi-max-frequency = <16000000>;
-		spi-cpha;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
deleted file mode 100644
index efbe93135dbe4..0000000000000
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-#include "am335x-boneblack-common.dtsi"
-#include "am335x-boneblack-hdmi.dtsi"
-#include "am335x-sancloud-bbe-common.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "SanCloud BeagleBone Enhanced";
-	compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
-};
-
-&am33xx_pinmux {
-	mpu6050_pins: pinmux_mpu6050_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE7)    /* uart0_ctsn.gpio1_8 */
-		>;
-	};
-
-	lps3331ap_pins: pinmux_lps3331ap_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)     /* gpmc_a10.gpio1_26 */
-		>;
-	};
-};
-
-&i2c0 {
-	lps331ap: barometer@5c {
-		pinctrl-names = "default";
-		pinctrl-0 = <&lps3331ap_pins>;
-		compatible = "st,lps331ap-press";
-		st,drdy-int-pin = <1>;
-		reg = <0x5c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <26 IRQ_TYPE_EDGE_RISING>;
-	};
-
-	mpu6050: accelerometer@68 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&mpu6050_pins>;
-		compatible = "invensense,mpu6050";
-		reg = <0x68>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
-		orientation = <0xff 0 0 0 1 0 0 0 0xff>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts
deleted file mode 100644
index 81e4453687ba1..0000000000000
--- a/arch/arm/boot/dts/am335x-sbc-t335.dts
+++ /dev/null
@@ -1,176 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
- *
- * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
- */
-
-#include "am335x-cm-t335.dts"
-
-/ {
-	model = "CompuLab CM-T335 on SB-T335";
-	compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx";
-
-	/* DRM display driver */
-	panel {
-		compatible = "ti,tilcdc,panel";
-		status = "okay";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&lcd_pins_default>;
-		pinctrl-1 = <&lcd_pins_sleep>;
-
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-		display-timings {
-			/* Timing selection performed by U-Boot */
-			timing0: lcd {/* 800x480p62 */
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <39>;
-				hback-porch = <39>;
-				hsync-len = <47>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <2>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-			timing1: dvi { /* 1024x768p60 */
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				hfront-porch = <24>;
-				hback-porch = <160>;
-				hsync-len = <136>;
-				vactive = <768>;
-				vfront-porch = <3>;
-				vback-porch = <29>;
-				vsync-len = <6>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-			};
-		};
-	};
-};
-
-&am33xx_pinmux {
-	/* Display */
-	lcd_pins_default: lcd_pins_default {
-		pinctrl-single,pins = <
-			/* gpmc_ad8.lcd_data23 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)
-			/* gpmc_ad9.lcd_data22 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)
-			/* gpmc_ad10.lcd_data21 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)
-			/* gpmc_ad11.lcd_data20 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)
-			/* gpmc_ad12.lcd_data19 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)
-			/* gpmc_ad13.lcd_data18 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)
-			/* gpmc_ad14.lcd_data17 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)
-			/* gpmc_ad15.lcd_data16 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	lcd_pins_sleep: lcd_pins_sleep {
-		pinctrl-single,pins = <
-			/* gpmc_ad8.lcd_data23 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			/* gpmc_ad9.lcd_data22 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			/* gpmc_ad10.lcd_data21 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			/* gpmc_ad11.lcd_data20 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			/* gpmc_ad12.lcd_data19 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			/* gpmc_ad13.lcd_data18 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			/* gpmc_ad14.lcd_data17 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			/* gpmc_ad15.lcd_data16 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-};
-
-&i2c0 {
-	/* GPIO extender */
-	gpio_ext: pca9555@26 {
-		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0x26>;
-		dvi-ena-hog {
-			gpio-hog;
-			gpios = <13 GPIO_ACTIVE_HIGH>;
-			output-high;
-			line-name = "dvi-enable";
-		};
-		lcd-ena-hog {
-			gpio-hog;
-			gpios = <11 GPIO_ACTIVE_HIGH>;
-			output-high;
-			line-name = "lcd-enable";
-		};
-	};
-};
-
-/* Display */
-&lcdc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
deleted file mode 100644
index c497200f9cb0b..0000000000000
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ /dev/null
@@ -1,559 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * support for the bosch am335x based shc c3 board
- *
- * Copyright, C) 2015 Heiko Schocher <hs@denx.de>
- *
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Bosch SHC";
-	compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
-
-	aliases {
-		mmcblk0 = &mmc1;
-		mmcblk1 = &mmc2;
-	};
-
-	cpus {
-		cpu@0 {
-			/*
-			 * To consider voltage drop between PMIC and SoC,
-			 * tolerance value is reduced to 2% from 4% and
-			 * voltage value is increased as a precaution.
-			 */
-			operating-points = <
-				/* kHz    uV */
-				594000  1225000
-				294000  1125000
-			>;
-			voltage-tolerance = <2>; /* 2 percentage */
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		back-button {
-			label = "Back Button";
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_BACK>;
-			debounce-interval = <1000>;
-			wakeup-source;
-		};
-
-		front-button {
-			label = "Front Button";
-			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_FRONT>;
-			debounce-interval = <1000>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "shc:power:red";
-			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "shc:power:bl";
-			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-			default-state = "on";
-		};
-
-		led3 {
-			label = "shc:lan:red";
-			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led4 {
-			label = "shc:lan:bl";
-			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led5 {
-			label = "shc:cloud:red";
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led6 {
-			label = "shc:cloud:bl";
-			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&aes {
-	status = "okay";
-};
-
-&epwmss1 {
-	status = "okay";
-
-	ehrpwm1: pwm@200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ehrpwm1_pins>;
-		status = "okay";
-	};
-};
-
-&gpio1 {
-	hmtc-rst-hog {
-		gpio-hog;
-		gpios = <24 GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "homematic_reset";
-	};
-
-	hmtc-prog-hog {
-		gpio-hog;
-		gpios = <27 GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "homematic_program";
-	};
-};
-
-&gpio3 {
-	zgb-rst-hog {
-		gpio-hog;
-		gpios = <18 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "zigbee_reset";
-	};
-
-	zgb-boot-hog {
-		gpio-hog;
-		gpios = <19 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "zigbee_boot";
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	at24@50 {
-		compatible = "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x50>;
-	};
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&cpsw_port1 {
-	phy-mode = "mii";
-	phy-handle = <&ethernetphy0>;
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	ethernetphy0: ethernet-phy@0 {
-		reg = <0>;
-		smsc,disable-energy-detect;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	bus-width = <0x4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-	cd-inverted;
-	max-frequency = <26000000>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	status = "okay";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	max-frequency = <26000000>;
-	sd-uhs-sdr25;
-	vmmc-supply = <&vmmcsd_fixed>;
-	status = "okay";
-};
-
-&mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins>;
-	bus-width = <4>;
-	cap-power-off-card;
-	max-frequency = <26000000>;
-	sd-uhs-sdr25;
-	vmmc-supply = <&vmmcsd_fixed>;
-	status = "okay";
-};
-
-&rtc {
-	ti,no-init;
-};
-
-&sham {
-	status = "okay";
-};
-
-&tps {
-	compatible = "ti,tps65217";
-	ti,pmic-shutdown-controller;
-
-	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dcdc1_reg: regulator@0 {
-			reg = <0>;
-			regulator-name = "vdds_dpr";
-			regulator-compatible = "dcdc1";
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1450000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			reg = <1>;
-			/*
-			 * VDD_MPU voltage limits 0.95V - 1.26V with
-			 * +/-4% tolerance
-			 */
-			regulator-compatible = "dcdc2";
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1375000>;
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-ramp-delay = <70000>;
-		};
-
-		dcdc3_reg: regulator@2 {
-			reg = <2>;
-			/*
-			 * VDD_CORE voltage limits 0.95V - 1.1V with
-			 * +/-4% tolerance
-			 */
-			regulator-name = "vdd_core";
-			regulator-compatible = "dcdc3";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1125000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			reg = <3>;
-			regulator-name = "vio,vrtc,vdds";
-			regulator-compatible = "ldo1";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			reg = <4>;
-			regulator-name = "vdd_3v3aux";
-			regulator-compatible = "ldo2";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			reg = <5>;
-			regulator-name = "vdd_1v8";
-			regulator-compatible = "ldo3";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			reg = <6>;
-			regulator-name = "vdd_3v3a";
-			regulator-compatible = "ldo4";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin>;
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			/* xdma_event_intr1.clkout2 */
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT, MUX_MODE6)
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	ehrpwm1_pins: pinmux_ehrpwm1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.gpio1_19 */
-		>;
-	};
-
-	emmc_pins: pinmux_emmc_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE5)
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT, MUX_MODE3)
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	uart1_pins: pinmux_uart1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)
-		>;
-	};
-
-	uart4_pins: pinmux_uart4_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE6)
-		>;
-	};
-
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLUP, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLUP, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
deleted file mode 100644
index 73b5d1a024bd1..0000000000000
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ /dev/null
@@ -1,721 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Toby Churchill SL50 Series";
-	compatible = "tcl,am335x-sl50", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		led0 {
-			label = "sl50:red:usr0";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led1 {
-			label = "sl50:green:usr1";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "sl50:red:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "sl50:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	backlight0: disp0 {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight0_pins>;
-		pwms = <&ehrpwm1 0 500000 PWM_POLARITY_INVERTED>;
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-		enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_sys_reg>;
-	};
-
-	backlight1: disp1 {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight1_pins>;
-		pwms = <&ehrpwm1 1 500000 PWM_POLARITY_INVERTED>;
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-		enable-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_sys_reg>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* audio external oscillator */
-		audio_mclk_fixed: oscillator@0 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency  = <24576000>;	/* 24.576MHz */
-		};
-
-		audio_mclk: audio_mclk_gate@0 {
-			compatible = "gpio-gate-clock";
-			#clock-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&audio_mclk_pins>;
-			clocks = <&audio_mclk_fixed>;
-			enable-gpios = <&gpio1 27 0>;
-		};
-	};
-
-	panel: lcd_panel {
-		compatible = "ti,tilcdc,panel";
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		panel-info {
-			ac-bias = <255>;
-			ac-bias-intrpt = <0>;
-			dma-burst-sz = <16>;
-			bpp = <16>;
-			fdd = <0x80>;
-			tft-alt-mode = <0>;
-			mono-8bit-mode = <0>;
-			sync-edge = <0>;
-			sync-ctrl = <1>;
-			raster-order = <0>;
-			fifo-th = <0>;
-		};
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: 960x128 {
-				clock-frequency = <18000000>;
-				hactive = <960>;
-				vactive = <272>;
-
-				hback-porch = <40>;
-				hfront-porch = <16>;
-				hsync-len = <24>;
-				hsync-active = <0>;
-
-				vback-porch = <3>;
-				vfront-porch = <8>;
-				vsync-len = <4>;
-				vsync-active = <0>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "audio-graph-card";
-		label = "sound-card";
-		pinctrl-names = "default";
-		pinctrl-0 = <&audio_pa_pins>;
-
-		widgets = "Headphone", "Headphone Jack",
-			  "Speaker", "Speaker External",
-			  "Line", "Line In",
-			  "Microphone", "Microphone Jack";
-
-		routing = "Headphone Jack",	"HPLOUT",
-			  "Headphone Jack",	"HPROUT",
-			  "Amplifier",		"MONO_LOUT",
-			  "Speaker External",	"Amplifier",
-			  "LINE1R",		"Line In",
-			  "LINE1L",		"Line In",
-			  "MIC3L",		"Microphone Jack",
-			  "MIC3R",		"Microphone Jack",
-			  "Microphone Jack",	"Mic Bias";
-
-		dais = <&cpu_port>;
-
-		pa-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-	};
-
-	emmc_pwrseq: pwrseq@0 {
-		compatible = "mmc-pwrseq-emmc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&emmc_pwrseq_pins>;
-		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-	};
-
-	vdd_sys_reg: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_sys_reg";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lwb_pins>;
-
-	audio_pins: pinmux_audio_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
-		>;
-	};
-
-	audio_pa_pins: pinmux_audio_pa_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* SoundPA_en - mcasp0_aclkr.gpio3_18 */
-		>;
-	};
-
-	audio_mclk_pins: pinmux_audio_mclk_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-		>;
-	};
-
-	backlight0_pins: pinmux_backlight0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7)	/* gpmc_wen.gpio2_4 */
-		>;
-	};
-
-	backlight1_pins: pinmux_backlight1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7)     /* gpmc_ad10.gpio0_26 */
-		>;
-	};
-
-	lcd_pins: pinmux_lcd_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart4_pins: pinmux_uart4_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* gpmc_wait0.uart4_rxd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* gpmc_wpn.uart4_txd */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			/* Ethernet */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7)	/* Ethernet_nRST - gpmc_ad14.gpio1_14 */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE7)		/* uart0_rtsn.gpio1_9 */
-		>;
-	};
-
-	emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a4.gpio1_20 */
-		>;
-	};
-
-	emmc_pins: pinmux_emmc_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) 	/* gpmc_ad5.mmc1_dat5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-
-	ehrpwm1_pins: pinmux_ehrpwm1a_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE6)	/* gpmc_a2.ehrpwm1a */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6)	/* gpmc_a3.ehrpwm1b */
-		>;
-	};
-
-	rtc0_irq_pins: pinmux_rtc0_irq_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7)     /* gpmc_ad9.gpio0_23 */
-		>;
-	};
-
-	spi0_pins: pinmux_spi0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_MOSI */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_MISO */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_CS0 (NBATTSS) */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_CS1 (FPGA_FLASH_NCS) */
-		>;
-	};
-
-	lwb_pins: pinmux_lwb_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7)	/* nKbdInt - gpmc_ad12.gpio1_12 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7)	/* nKbdReset - gpmc_ad13.gpio1_13 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE7)	/* USB1_enPower - gpmc_a1.gpio1_17 */
-			/* PDI Bus - Battery system */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7)	/* nBattReset  gpmc_a0.gpio1_16 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7)	/* BattPDIData gpmc_ad15.gpio1_15 */
-			/* FPGA */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE7)	/* FPGA_DONE - gpmc_ad8.gpio0_22 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7)	/* FPGA_NRST - gpmc_a0.gpio1_16 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* FPGA_RUN - gpmc_a1.gpio1_17 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7)	/* ENFPGA - gpmc_a9.gpio1_25 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
-		>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	rtc0: rtc@68 {
-		compatible = "dallas,ds1339";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rtc0_irq_pins>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <23 IRQ_TYPE_EDGE_FALLING>; /* gpio 23 */
-		wakeup-source;
-		trickle-resistor-ohms = <2000>;
-		reg = <0x68>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-
-	gpio_exp: mcp23017@20 {
-		compatible = "microchip,mcp23017";
-		reg = <0x20>;
-	};
-
-};
-
-&i2c2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-
-	audio_codec: tlv320aic3106@1b {
-		status = "okay";
-		compatible = "ti,tlv320aic3106";
-		#sound-dai-cells = <0>;
-		reg = <0x1b>;
-		ai3x-micbias-vg = <2>;  /* 2.5V */
-
-		AVDD-supply = <&ldo4_reg>;
-		IOVDD-supply = <&ldo4_reg>;
-		DRVDD-supply = <&ldo4_reg>;
-		DVDD-supply = <&ldo3_reg>;
-
-		codec_port: port {
-			codec_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint>;
-				clocks = <&audio_mclk>;
-			};
-		};
-	};
-
-	/* Ambient Light Sensor */
-	als: isl29023@44 {
-		compatible = "isil,isl29023";
-		reg = <0x44>;
-	};
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&usb0 {
-	dr_mode = "otg";
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&mmc1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	bus-width = <4>;
-	cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&vmmcsd_fixed>;
-};
-
-&mmc2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	mmc-pwrseq = <&emmc_pwrseq>;
-};
-
-&mcasp0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&audio_pins>;
-	#sound-dai-cells = <0>;
-	op-mode = <0>;  /* MCASP_ISS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializers */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		0 0 1 2
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-
-	cpu_port: port {
-		cpu_endpoint: endpoint {
-			remote-endpoint = <&codec_endpoint>;
-
-			dai-format = "dsp_b";
-			bitclock-master = <&codec_port>;
-			frame-master = <&codec_port>;
-			bitclock-inversion;
-			clocks = <&audio_mclk>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-
-	flash: flash@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q032";
-		reg = <1>;
-		spi-max-frequency = <5000000>;
-	};
-};
-
-#include "tps65217.dtsi"
-
-&tps {
-	ti,pmic-shutdown-controller;
-
-	interrupt-parent = <&intc>;
-	interrupts = <7>;	/* NNMI */
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			/* VDDS_DDR */
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			/* VRTC / VIO / VDDS*/
-			regulator-always-on;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		ldo2_reg: regulator@4 {
-			/* VDD_3V3AUX */
-			regulator-always-on;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		ldo3_reg: regulator@5 {
-			/* VDD_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			/* VDD_3V3A */
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&cpsw_port1 {
-	phy-mode = "mii";
-	phy-handle = <&ethphy0>;
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
-
-&mac_sw {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	reset-delay-us = <100>;   /* PHY datasheet states 100us min */
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&epwmss1 {
-	status = "okay";
-};
-
-&ehrpwm1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ehrpwm1_pins>;
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&tscadc {
-	status = "okay";
-};
-
-&am335x_adc {
-	ti,adc-channels = <0 1 2 3 4 5 6 7>;
-};
diff --git a/arch/arm/boot/dts/am335x-wega-rdk.dts b/arch/arm/boot/dts/am335x-wega-rdk.dts
deleted file mode 100644
index 866b5f0cbfbc4..0000000000000
--- a/arch/arm/boot/dts/am335x-wega-rdk.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 Phytec Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet@phytec.de>
- */
-
-/dts-v1/;
-
-#include "am335x-phycore-som.dtsi"
-#include "am335x-wega.dtsi"
-
-/* SoM */
-&gpmc {
-	status = "okay";
-};
-
-&i2c_eeprom {
-	status = "okay";
-};
-
-&i2c_rtc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
deleted file mode 100644
index 6a103f17585b4..0000000000000
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 Phytec Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet@phytec.de>
- */
-
-/ {
-	model = "Phytec AM335x phyBOARD-WEGA";
-	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
-
-	sound: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "snd-wega";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_iface_main>;
-		simple-audio-card,frame-master = <&sound_iface_main>;
-		simple-audio-card,mclk-fs = <32>;
-		simple-audio-card,widgets =
-					"Line", "Line In",
-					"Line", "Line Out",
-					"Speaker", "Speaker";
-		simple-audio-card,routing =
-					"Line Out", "LLOUT",
-					"Line Out", "RLOUT",
-					"Speaker", "SPOP",
-					"Speaker", "SPOM",
-					"LINE1L", "Line In",
-					"LINE1R", "Line In";
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp0>;
-		};
-
-		sound_iface_main: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3007>;
-			clocks = <&mcasp0_fck>;
-		};
-
-	};
-
-	vcc3v3: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-};
-
-/* Audio */
-&am33xx_pinmux {
-	mcasp0_pins: pinmux-mcasp0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-};
-
-&i2c0 {
-	tlv320aic3007: tlv320aic3007@18 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3007";
-		reg = <0x18>;
-		AVDD-supply = <&vcc3v3>;
-		IOVDD-supply = <&vcc3v3>;
-		DRVDD-supply = <&vcc3v3>;
-		DVDD-supply = <&vdig1_reg>;
-		status = "okay";
-	};
-};
-
-&mcasp0 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp0_pins>;
-	op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <
-		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
-	>;
-	tx-num-evt = <16>;
-	rx-num-evt = <16>;
-	status = "okay";
-};
-
-
-/* CAN Busses */
-&am33xx_pinmux {
-	dcan1_pins: pinmux-dcan1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
-		>;
-	};
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-	status = "okay";
-};
-
-/* Ethernet */
-&am33xx_pinmux {
-	ethernet1_pins: pinmux-ethernet1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a6.mii2_txclk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a9.mii2_rxd2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_ben1.mii2_col */
-		>;
-	};
-};
-
-&cpsw_port2 {
-	status = "okay";
-	phy-handle = <&phy1>;
-	phy-mode = "mii";
-	ti,dual-emac-pvid = <2>;
-};
-
-&davinci_mdio_sw {
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&mac_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-};
-
-/* MMC */
-&am33xx_pinmux {
-	mmc1_pins: pinmux-mmc1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
-		>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vcc3v3>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-/* Power */
-&vdig1_reg {
-	regulator-boot-on;
-	regulator-always-on;
-};
-
-/* UARTs */
-&am33xx_pinmux {
-	uart0_pins: pinmux-uart0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart1_pins: pinmux-uart1 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
deleted file mode 100644
index d34483ae1778e..0000000000000
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ /dev/null
@@ -1,779 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for AM33xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&scm_clocks {
-	sys_clkin_ck: clock-sys-clkin-22@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "sys_clkin_ck";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: clock-adc-tsc-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "adc_tsc_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: clock-dcan0-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dcan0_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: clock-dcan1-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dcan1_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: clock-mcasp0-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "mcasp0_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: clock-mcasp1-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "mcasp1_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: clock-smartreflex0-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "smartreflex0_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: clock-smartreflex1-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "smartreflex1_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: clock-sha0-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "sha0_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: clock-aes0-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "aes0_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	rng_fck: clock-rng-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "rng_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	clock@664 {
-		compatible = "ti,clksel";
-		reg = <0x664>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		ehrpwm0_tbclk: clock-ehrpwm0-tbclk {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "ehrpwm0_tbclk";
-			clocks = <&l4ls_gclk>;
-			ti,bit-shift = <0>;
-		};
-
-		ehrpwm1_tbclk: clock-ehrpwm1-tbclk {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "ehrpwm1_tbclk";
-			clocks = <&l4ls_gclk>;
-			ti,bit-shift = <1>;
-		};
-
-		ehrpwm2_tbclk: clock-ehrpwm2-tbclk {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "ehrpwm2_tbclk";
-			clocks = <&l4ls_gclk>;
-			ti,bit-shift = <2>;
-		};
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clock-clk-32768 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "clk_32768_ck";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clock-clk-rc32k {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "clk_rc32k_ck";
-		clock-frequency = <32000>;
-	};
-
-	virt_19200000_ck: clock-virt-19200000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_19200000_ck";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: clock-virt-24000000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_24000000_ck";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: clock-virt-25000000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_25000000_ck";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: clock-virt-26000000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_26000000_ck";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: clock-tclkin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "tclkin_ck";
-		clock-frequency = <12000000>;
-	};
-
-	dpll_core_ck: clock@490 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clock-output-names = "dpll_core_ck";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0490>, <0x045c>, <0x0468>, <0x0460>, <0x0464>;
-	};
-
-	dpll_core_x2_ck: clock-dpll-core-x2 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clock-output-names = "dpll_core_x2_ck";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: clock-dpll-core-m4@480 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m4_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0480>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m5_ck: clock-dpll-core-m5@484 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m5_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0484>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m6_ck: clock-dpll-core-m6@4d8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m6_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x04d8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_mpu_ck: clock@488 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clock-output-names = "dpll_mpu_ck";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0488>, <0x0420>, <0x042c>, <0x0424>, <0x0428>;
-	};
-
-	dpll_mpu_m2_ck: clock-dpll-mpu-m2@4a8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_mpu_m2_ck";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_ck: clock@494 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clock-output-names = "dpll_ddr_ck";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0494>, <0x0434>, <0x0440>, <0x0438>, <0x043c>;
-	};
-
-	dpll_ddr_m2_ck: clock-dpll-ddr-m2@4a0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_ddr_m2_ck";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a0>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_m2_div2_ck: clock-dpll-ddr-m2-div2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dpll_ddr_m2_div2_ck";
-		clocks = <&dpll_ddr_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_disp_ck: clock@498 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clock-output-names = "dpll_disp_ck";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>;
-	};
-
-	dpll_disp_m2_ck: clock-dpll-disp-m2@4a4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_disp_m2_ck";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a4>;
-		ti,index-starts-at-one;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: clock@48c {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-j-type-clock";
-		clock-output-names = "dpll_per_ck";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x048c>, <0x0470>, <0x049c>, <0x0474>, <0x0478>;
-	};
-
-	dpll_per_m2_ck: clock-dpll-per-m2@4ac {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_m2_ck";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		reg = <0x04ac>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dpll_per_m2_div4_wkupdm_ck";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dpll_per_m2_div4_ck";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	clk_24mhz: clock-clk-24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "clk_24mhz";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clock-clkdiv32k {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "clkdiv32k_ck";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	l3_gclk: clock-l3-gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "l3_gclk";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: clock-pruss-ocp-gclk@530 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "pruss_ocp_gclk";
-		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
-		reg = <0x0530>;
-	};
-
-	mmu_fck: clock-mmu-fck-1@914 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "mmu_fck";
-		clocks = <&dpll_core_m4_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0914>;
-	};
-
-	timer1_fck: clock-timer1-fck@528 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer1_fck";
-		clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
-		reg = <0x0528>;
-	};
-
-	timer2_fck: clock-timer2-fck@508 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer2_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0508>;
-	};
-
-	timer3_fck: clock-timer3-fck@50c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer3_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x050c>;
-	};
-
-	timer4_fck: clock-timer4-fck@510 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer4_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0510>;
-	};
-
-	timer5_fck: clock-timer5-fck@518 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer5_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0518>;
-	};
-
-	timer6_fck: clock-timer6-fck@51c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer6_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x051c>;
-	};
-
-	timer7_fck: clock-timer7-fck@504 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer7_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0504>;
-	};
-
-	usbotg_fck: clock-usbotg-fck-8@47c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "usbotg_fck";
-		clocks = <&dpll_per_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x047c>;
-	};
-
-	dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dpll_core_m4_div2_ck";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	ieee5000_fck: clock-ieee5000-fck-1@e4 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "ieee5000_fck";
-		clocks = <&dpll_core_m4_div2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x00e4>;
-	};
-
-	wdt1_fck: clock-wdt1-fck@538 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "wdt1_fck";
-		clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0538>;
-	};
-
-	l4_rtc_gclk: clock-l4-rtc-gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "l4_rtc_gclk";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: clock-l4hs-gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "l4hs_gclk";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: clock-l3s-gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "l3s_gclk";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4fw_gclk: clock-l4fw-gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "l4fw_gclk";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: clock-l4ls-gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "l4ls_gclk";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sysclk_div_ck: clock-sysclk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "sysclk_div_ck";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "cpsw_125mhz_gclk";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@520 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "cpsw_cpts_rft_clk";
-		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
-		reg = <0x0520>;
-	};
-
-	gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@53c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "gpio0_dbclk_mux_ck";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x053c>;
-	};
-
-	lcd_gclk: clock-lcd-gclk@534 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "lcd_gclk";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x0534>;
-		ti,set-rate-parent;
-	};
-
-	mmc_clk: clock-mmc {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "mmc_clk";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	clock@52c {
-		compatible = "ti,clksel";
-		reg = <0x52c>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		gfx_fclk_clksel_ck: clock-gfx-fclk-clksel {
-			#clock-cells = <0>;
-			compatible = "ti,mux-clock";
-			clock-output-names = "gfx_fclk_clksel_ck";
-			clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
-			ti,bit-shift = <1>;
-		};
-
-		gfx_fck_div_ck: clock-gfx-fck-div {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "gfx_fck_div_ck";
-			clocks = <&gfx_fclk_clksel_ck>;
-			ti,max-div = <2>;
-		};
-	};
-
-	clock@700 {
-		compatible = "ti,clksel";
-		reg = <0x700>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		sysclkout_pre_ck: clock-sysclkout-pre {
-			#clock-cells = <0>;
-			compatible = "ti,mux-clock";
-			clock-output-names = "sysclkout_pre_ck";
-			clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
-		};
-
-		clkout2_div_ck: clock-clkout2-div {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "clkout2_div_ck";
-			clocks = <&sysclkout_pre_ck>;
-			ti,bit-shift = <3>;
-			ti,max-div = <8>;
-		};
-
-		clkout2_ck: clock-clkout2 {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "clkout2_ck";
-			clocks = <&clkout2_div_ck>;
-			ti,bit-shift = <7>;
-		};
-	};
-};
-
-&prcm {
-	per_cm: clock@0 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "per_cm";
-		reg = <0x0 0x400>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x0 0x400>;
-
-		l4ls_clkctrl: clock@38 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4ls_clkctrl";
-			reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l3s_clkctrl: clock@1c {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3s_clkctrl";
-			reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l3_clkctrl: clock@24 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3_clkctrl";
-			reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>;
-			#clock-cells = <2>;
-		};
-
-		l4hs_clkctrl: clock@120 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4hs_clkctrl";
-			reg = <0x120 0x4>;
-			#clock-cells = <2>;
-		};
-
-		pruss_ocp_clkctrl: clock@e8 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "pruss_ocp_clkctrl";
-			reg = <0xe8 0x4>;
-			#clock-cells = <2>;
-		};
-
-		cpsw_125mhz_clkctrl: clock@0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "cpsw_125mhz_clkctrl";
-			reg = <0x0 0x18>;
-			#clock-cells = <2>;
-		};
-
-		lcdc_clkctrl: clock@18 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "lcdc_clkctrl";
-			reg = <0x18 0x4>;
-			#clock-cells = <2>;
-		};
-
-		clk_24mhz_clkctrl: clock@14c {
-			compatible = "ti,clkctrl";
-			clock-output-names = "clk_24mhz_clkctrl";
-			reg = <0x14c 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	wkup_cm: clock@400 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "wkup_cm";
-		reg = <0x400 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x400 0x100>;
-
-		l4_wkup_clkctrl: clock@0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4_wkup_clkctrl";
-			reg = <0x0 0x10>, <0xb4 0x24>;
-			#clock-cells = <2>;
-		};
-
-		l3_aon_clkctrl: clock@14 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3_aon_clkctrl";
-			reg = <0x14 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l4_wkup_aon_clkctrl: clock@b0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4_wkup_aon_clkctrl";
-			reg = <0xb0 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	mpu_cm: clock@600 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "mpu_cm";
-		reg = <0x600 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x600 0x100>;
-
-		mpu_clkctrl: clock@0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "mpu_clkctrl";
-			reg = <0x0 0x8>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4_rtc_cm: clock@800 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l4_rtc_cm";
-		reg = <0x800 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x800 0x100>;
-
-		l4_rtc_clkctrl: clock@0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4_rtc_clkctrl";
-			reg = <0x0 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	gfx_l3_cm: clock@900 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "gfx_l3_cm";
-		reg = <0x900 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x900 0x100>;
-
-		gfx_l3_clkctrl: clock@0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "gfx_l3_clkctrl";
-			reg = <0x0 0x8>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4_cefuse_cm: clock@a00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l4_cefuse_cm";
-		reg = <0xa00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xa00 0x100>;
-
-		l4_cefuse_clkctrl: clock@0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4_cefuse_clkctrl";
-			reg = <0x0 0x24>;
-			#clock-cells = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
deleted file mode 100644
index 7e50fe633d8a1..0000000000000
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ /dev/null
@@ -1,2322 +0,0 @@
-&l4_wkup {						/* 0x44c00000 */
-	compatible = "ti,am33xx-l4-wkup", "simple-pm-bus";
-	power-domains = <&prm_wkup>;
-	clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x44c00000 0x800>,
-	      <0x44c00800 0x800>,
-	      <0x44c01000 0x400>,
-	      <0x44c01400 0x400>;
-	reg-names = "ap", "la", "ia0", "ia1";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x44c00000 0x100000>,	/* segment 0 */
-		 <0x00100000 0x44d00000 0x100000>,	/* segment 1 */
-		 <0x00200000 0x44e00000 0x100000>;	/* segment 2 */
-
-	segment@0 {					/* 0x44c00000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
-			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
-			 <0x00001400 0x00001400 0x000400>;	/* ap 3 */
-	};
-
-	segment@100000 {					/* 0x44d00000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00100000 0x004000>,	/* ap 4 */
-			 <0x00004000 0x00104000 0x001000>,	/* ap 5 */
-			 <0x00080000 0x00180000 0x002000>,	/* ap 6 */
-			 <0x00082000 0x00182000 0x001000>;	/* ap 7 */
-
-		target-module@0 {			/* 0x44d00000, ap 4 28.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x0 0x4>;
-			reg-names = "rev";
-			clocks = <&l4_wkup_aon_clkctrl AM3_L4_WKUP_AON_WKUP_M3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00000000 0x4000>,
-				 <0x00080000 0x00080000 0x2000>;
-
-			wkup_m3: cpu@0 {
-				compatible = "ti,am3352-wkup-m3";
-				reg = <0x00000000 0x4000>,
-				      <0x00080000 0x2000>;
-				reg-names = "umem", "dmem";
-				resets = <&prm_wkup 3>;
-				reset-names = "rstctrl";
-				ti,pm-firmware = "am335x-pm-firmware.elf";
-			};
-		};
-	};
-
-	segment@200000 {					/* 0x44e00000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00200000 0x002000>,	/* ap 8 */
-			 <0x00002000 0x00202000 0x001000>,	/* ap 9 */
-			 <0x00003000 0x00203000 0x001000>,	/* ap 10 */
-			 <0x00004000 0x00204000 0x001000>,	/* ap 11 */
-			 <0x00005000 0x00205000 0x001000>,	/* ap 12 */
-			 <0x00006000 0x00206000 0x001000>,	/* ap 13 */
-			 <0x00007000 0x00207000 0x001000>,	/* ap 14 */
-			 <0x00008000 0x00208000 0x001000>,	/* ap 15 */
-			 <0x00009000 0x00209000 0x001000>,	/* ap 16 */
-			 <0x0000a000 0x0020a000 0x001000>,	/* ap 17 */
-			 <0x0000b000 0x0020b000 0x001000>,	/* ap 18 */
-			 <0x0000c000 0x0020c000 0x001000>,	/* ap 19 */
-			 <0x0000d000 0x0020d000 0x001000>,	/* ap 20 */
-			 <0x0000f000 0x0020f000 0x001000>,	/* ap 21 */
-			 <0x00010000 0x00210000 0x010000>,	/* ap 22 */
-			 <0x00020000 0x00220000 0x010000>,	/* ap 23 */
-			 <0x00030000 0x00230000 0x001000>,	/* ap 24 */
-			 <0x00031000 0x00231000 0x001000>,	/* ap 25 */
-			 <0x00032000 0x00232000 0x001000>,	/* ap 26 */
-			 <0x00033000 0x00233000 0x001000>,	/* ap 27 */
-			 <0x00034000 0x00234000 0x001000>,	/* ap 28 */
-			 <0x00035000 0x00235000 0x001000>,	/* ap 29 */
-			 <0x00036000 0x00236000 0x001000>,	/* ap 30 */
-			 <0x00037000 0x00237000 0x001000>,	/* ap 31 */
-			 <0x00038000 0x00238000 0x001000>,	/* ap 32 */
-			 <0x00039000 0x00239000 0x001000>,	/* ap 33 */
-			 <0x0003a000 0x0023a000 0x001000>,	/* ap 34 */
-			 <0x0003e000 0x0023e000 0x001000>,	/* ap 35 */
-			 <0x0003f000 0x0023f000 0x001000>,	/* ap 36 */
-			 <0x0000e000 0x0020e000 0x001000>,	/* ap 37 */
-			 <0x00040000 0x00240000 0x040000>,	/* ap 38 */
-			 <0x00080000 0x00280000 0x001000>;	/* ap 39 */
-
-		target-module@0 {			/* 0x44e00000, ap 8 58.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x2000>;
-
-			prcm: prcm@0 {
-				compatible = "ti,am3-prcm", "simple-bus";
-				reg = <0 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x2000>;
-
-				prcm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prcm_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		target-module@3000 {			/* 0x44e03000, ap 10 0a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3000 0x1000>;
-		};
-
-		target-module@5000 {			/* 0x44e05000, ap 12 30.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5000 0x1000>;
-		};
-
-		gpio0_target: target-module@7000 {	/* 0x44e07000, ap 14 20.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x7000 0x4>,
-			      <0x7010 0x4>,
-			      <0x7114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 0>,
-				 <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 18>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x7000 0x1000>;
-
-			gpio0: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				gpio-ranges =	<&am33xx_pinmux  0  82 8>,
-						<&am33xx_pinmux  8  52 4>,
-						<&am33xx_pinmux 12  94 4>,
-						<&am33xx_pinmux 16  71 2>,
-						<&am33xx_pinmux 18 135 1>,
-						<&am33xx_pinmux 19 108 2>,
-						<&am33xx_pinmux 21  73 1>,
-						<&am33xx_pinmux 22   8 2>,
-						<&am33xx_pinmux 26  10 2>,
-						<&am33xx_pinmux 28  74 1>,
-						<&am33xx_pinmux 29  81 1>,
-						<&am33xx_pinmux 30  28 2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x1000>;
-				interrupts = <96>;
-			};
-		};
-
-		target-module@9000 {			/* 0x44e09000, ap 16 04.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x9050 0x4>,
-			      <0x9054 0x4>,
-			      <0x9058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_UART1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x9000 0x1000>;
-
-			uart0: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				clock-frequency = <48000000>;
-				reg = <0x0 0x1000>;
-				interrupts = <72>;
-				status = "disabled";
-				dmas = <&edma 26 0>, <&edma 27 0>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@b000 {			/* 0x44e0b000, ap 18 48.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xb000 0x8>,
-			      <0xb010 0x8>,
-			      <0xb090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_I2C1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb000 0x1000>;
-
-			i2c0: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x0 0x1000>;
-				interrupts = <70>;
-				status = "disabled";
-			};
-		};
-
-		target-module@d000 {			/* 0x44e0d000, ap 20 38.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xd000 0x4>,
-			      <0xd010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_ADC_TSC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x0000d000 0x00001000>,
-				 <0x00001000 0x0000e000 0x00001000>;
-
-			tscadc: tscadc@0 {
-				compatible = "ti,am3359-tscadc";
-				reg = <0x0 0x1000>;
-				interrupts = <16>;
-				clocks = <&adc_tsc_fck>;
-				clock-names = "fck";
-				status = "disabled";
-				dmas = <&edma 53 0>, <&edma 57 0>;
-				dma-names = "fifo0", "fifo1";
-
-				tsc {
-					compatible = "ti,am3359-tsc";
-				};
-				am335x_adc: adc {
-					#io-channel-cells = <1>;
-					compatible = "ti,am3359-adc";
-				};
-			};
-		};
-
-		target-module@10000 {			/* 0x44e10000, ap 22 0c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x10000 0x4>;
-			reg-names = "rev";
-			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_CONTROL_CLKCTRL 0>;
-			clock-names = "fck";
-			ti,no-idle;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00010000 0x00010000>,
-				 <0x00010000 0x00020000 0x00010000>;
-
-			scm: scm@0 {
-				compatible = "ti,am3-scm", "simple-bus";
-				reg = <0x0 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#pinctrl-cells = <1>;
-				ranges = <0 0 0x2000>;
-
-				am33xx_pinmux: pinmux@800 {
-					compatible = "pinctrl-single";
-					reg = <0x800 0x238>;
-					#pinctrl-cells = <2>;
-					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0x7f>;
-				};
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
-					reg = <0x0 0x800>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0 0x800>;
-
-					phy_gmii_sel: phy-gmii-sel {
-						compatible = "ti,am3352-phy-gmii-sel";
-						reg = <0x650 0x4>;
-						#phy-cells = <2>;
-					};
-
-					scm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				usb_ctrl_mod: control@620 {
-					compatible = "ti,am335x-usb-ctrl-module";
-					reg = <0x620 0x10>,
-					      <0x648 0x4>;
-					reg-names = "phy_ctrl", "wakeup";
-				};
-
-				wkup_m3_ipc: wkup_m3_ipc@1324 {
-					compatible = "ti,am3352-wkup-m3-ipc";
-					reg = <0x1324 0x24>;
-					interrupts = <78>;
-					ti,rproc = <&wkup_m3>;
-					mboxes = <&mailbox &mbox_wkupm3>;
-				};
-
-				edma_xbar: dma-router@f90 {
-					compatible = "ti,am335x-edma-crossbar";
-					reg = <0xf90 0x40>;
-					#dma-cells = <3>;
-					dma-requests = <32>;
-					dma-masters = <&edma>;
-				};
-
-				scm_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		timer1_target: target-module@31000 {	/* 0x44e31000, ap 25 40.0 */
-			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			reg = <0x31000 0x4>,
-			      <0x31010 0x4>,
-			      <0x31014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x31000 0x1000>;
-
-			timer1: timer@0 {
-				compatible = "ti,am335x-timer-1ms";
-				reg = <0x0 0x400>;
-				interrupts = <67>;
-				ti,timer-alwon;
-				clocks = <&timer1_fck>;
-				clock-names = "fck";
-			};
-		};
-
-		target-module@33000 {			/* 0x44e33000, ap 27 18.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x33000 0x1000>;
-		};
-
-		target-module@35000 {			/* 0x44e35000, ap 29 50.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x35000 0x4>,
-			      <0x35010 0x4>,
-			      <0x35014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_WD_TIMER2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x35000 0x1000>;
-
-			wdt2: wdt@0 {
-				compatible = "ti,omap3-wdt";
-				reg = <0x0 0x1000>;
-				interrupts = <91>;
-			};
-		};
-
-		target-module@37000 {			/* 0x44e37000, ap 31 08.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x37000 0x1000>;
-		};
-
-		target-module@39000 {			/* 0x44e39000, ap 33 02.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x39000 0x1000>;
-		};
-
-		target-module@3e000 {			/* 0x44e3e000, ap 35 60.0 */
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x3e074 0x4>,
-			      <0x3e078 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */
-			power-domains = <&prm_rtc>;
-			clocks = <&l4_rtc_clkctrl AM3_L4_RTC_RTC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3e000 0x1000>;
-
-			rtc: rtc@0 {
-				compatible = "ti,am3352-rtc", "ti,da830-rtc";
-				reg = <0x0 0x1000>;
-				interrupts = <75
-					      76>;
-			};
-		};
-
-		target-module@40000 {			/* 0x44e40000, ap 38 68.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x40000 0x40000>;
-		};
-	};
-};
-
-&l4_fw {						/* 0x47c00000 */
-	compatible = "ti,am33xx-l4-fw", "simple-bus";
-	reg = <0x47c00000 0x800>,
-	      <0x47c00800 0x800>,
-	      <0x47c01000 0x400>;
-	reg-names = "ap", "la", "ia0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x47c00000 0x1000000>;	/* segment 0 */
-
-	segment@0 {					/* 0x47c00000 */
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
-			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
-			 <0x0000c000 0x0000c000 0x001000>,	/* ap 3 */
-			 <0x0000d000 0x0000d000 0x001000>,	/* ap 4 */
-			 <0x0000e000 0x0000e000 0x001000>,	/* ap 5 */
-			 <0x0000f000 0x0000f000 0x001000>,	/* ap 6 */
-			 <0x00010000 0x00010000 0x001000>,	/* ap 7 */
-			 <0x00011000 0x00011000 0x001000>,	/* ap 8 */
-			 <0x0001a000 0x0001a000 0x001000>,	/* ap 9 */
-			 <0x0001b000 0x0001b000 0x001000>,	/* ap 10 */
-			 <0x00024000 0x00024000 0x001000>,	/* ap 11 */
-			 <0x00025000 0x00025000 0x001000>,	/* ap 12 */
-			 <0x00026000 0x00026000 0x001000>,	/* ap 13 */
-			 <0x00027000 0x00027000 0x001000>,	/* ap 14 */
-			 <0x00030000 0x00030000 0x001000>,	/* ap 15 */
-			 <0x00031000 0x00031000 0x001000>,	/* ap 16 */
-			 <0x00038000 0x00038000 0x001000>,	/* ap 17 */
-			 <0x00039000 0x00039000 0x001000>,	/* ap 18 */
-			 <0x0003a000 0x0003a000 0x001000>,	/* ap 19 */
-			 <0x0003b000 0x0003b000 0x001000>,	/* ap 20 */
-			 <0x0003e000 0x0003e000 0x001000>,	/* ap 21 */
-			 <0x0003f000 0x0003f000 0x001000>,	/* ap 22 */
-			 <0x0003c000 0x0003c000 0x001000>,	/* ap 23 */
-			 <0x00040000 0x00040000 0x001000>,	/* ap 24 */
-			 <0x00046000 0x00046000 0x001000>,	/* ap 25 */
-			 <0x00047000 0x00047000 0x001000>,	/* ap 26 */
-			 <0x00044000 0x00044000 0x001000>,	/* ap 27 */
-			 <0x00045000 0x00045000 0x001000>,	/* ap 28 */
-			 <0x00028000 0x00028000 0x001000>,	/* ap 29 */
-			 <0x00029000 0x00029000 0x001000>,	/* ap 30 */
-			 <0x00032000 0x00032000 0x001000>,	/* ap 31 */
-			 <0x00033000 0x00033000 0x001000>,	/* ap 32 */
-			 <0x0003d000 0x0003d000 0x001000>,	/* ap 33 */
-			 <0x00041000 0x00041000 0x001000>,	/* ap 34 */
-			 <0x00042000 0x00042000 0x001000>,	/* ap 35 */
-			 <0x00043000 0x00043000 0x001000>,	/* ap 36 */
-			 <0x00014000 0x00014000 0x001000>,	/* ap 37 */
-			 <0x00015000 0x00015000 0x001000>;	/* ap 38 */
-
-		target-module@c000 {			/* 0x47c0c000, ap 3 04.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc000 0x1000>;
-		};
-
-		target-module@e000 {			/* 0x47c0e000, ap 5 0c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xe000 0x1000>;
-		};
-
-		target-module@10000 {			/* 0x47c10000, ap 7 20.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x10000 0x1000>;
-		};
-
-		target-module@14000 {			/* 0x47c14000, ap 37 3c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x14000 0x1000>;
-		};
-
-		target-module@1a000 {			/* 0x47c1a000, ap 9 08.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1a000 0x1000>;
-		};
-
-		target-module@24000 {			/* 0x47c24000, ap 11 28.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x24000 0x1000>;
-		};
-
-		target-module@26000 {			/* 0x47c26000, ap 13 30.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x26000 0x1000>;
-		};
-
-		target-module@28000 {			/* 0x47c28000, ap 29 40.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x28000 0x1000>;
-		};
-
-		target-module@30000 {			/* 0x47c30000, ap 15 14.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x30000 0x1000>;
-		};
-
-		target-module@32000 {			/* 0x47c32000, ap 31 06.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x32000 0x1000>;
-		};
-
-		target-module@38000 {			/* 0x47c38000, ap 17 18.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x38000 0x1000>;
-		};
-
-		target-module@3a000 {			/* 0x47c3a000, ap 19 1c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3a000 0x1000>;
-		};
-
-		target-module@3c000 {			/* 0x47c3c000, ap 23 38.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3c000 0x1000>;
-		};
-
-		target-module@3e000 {			/* 0x47c3e000, ap 21 10.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3e000 0x1000>;
-		};
-
-		target-module@40000 {			/* 0x47c40000, ap 24 02.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x40000 0x1000>;
-		};
-
-		target-module@42000 {			/* 0x47c42000, ap 35 34.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x42000 0x1000>;
-		};
-
-		target-module@44000 {			/* 0x47c44000, ap 27 24.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x44000 0x1000>;
-		};
-
-		target-module@46000 {			/* 0x47c46000, ap 25 2c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x46000 0x1000>;
-		};
-	};
-};
-
-&l4_fast {					/* 0x4a000000 */
-	compatible = "ti,am33xx-l4-fast", "simple-pm-bus";
-	power-domains = <&prm_per>;
-	clocks = <&l4hs_clkctrl AM3_L4HS_L4_HS_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x4a000000 0x800>,
-	      <0x4a000800 0x800>,
-	      <0x4a001000 0x400>;
-	reg-names = "ap", "la", "ia0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x4a000000 0x1000000>;	/* segment 0 */
-
-	segment@0 {					/* 0x4a000000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
-			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
-			 <0x00100000 0x00100000 0x008000>,	/* ap 3 */
-			 <0x00108000 0x00108000 0x001000>,	/* ap 4 */
-			 <0x00180000 0x00180000 0x020000>,	/* ap 5 */
-			 <0x001a0000 0x001a0000 0x001000>,	/* ap 6 */
-			 <0x00200000 0x00200000 0x080000>,	/* ap 7 */
-			 <0x00280000 0x00280000 0x001000>,	/* ap 8 */
-			 <0x00300000 0x00300000 0x080000>,	/* ap 9 */
-			 <0x00380000 0x00380000 0x001000>;	/* ap 10 */
-
-		target-module@100000 {			/* 0x4a100000, ap 3 08.0 */
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x101200 0x4>,
-			      <0x101208 0x4>,
-			      <0x101204 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <0>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			ti,syss-mask = <1>;
-			clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x100000 0x8000>;
-
-			mac: ethernet@0 {
-				compatible = "ti,am335x-cpsw","ti,cpsw";
-				clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-				clock-names = "fck", "cpts";
-				cpdma_channels = <8>;
-				ale_entries = <1024>;
-				bd_ram_size = <0x2000>;
-				mac_control = <0x20>;
-				slaves = <2>;
-				active_slave = <0>;
-				cpts_clock_mult = <0x80000000>;
-				cpts_clock_shift = <29>;
-				reg = <0x0 0x800
-				       0x1200 0x100>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				/*
-				 * c0_rx_thresh_pend
-				 * c0_rx_pend
-				 * c0_tx_pend
-				 * c0_misc_pend
-				 */
-				interrupts = <40 41 42 43>;
-				ranges = <0 0 0x8000>;
-				syscon = <&scm_conf>;
-				status = "disabled";
-
-				davinci_mdio: mdio@1000 {
-					compatible = "ti,cpsw-mdio","ti,davinci_mdio";
-					clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
-					clock-names = "fck";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					bus_freq = <1000000>;
-					reg = <0x1000 0x100>;
-					status = "disabled";
-				};
-
-				cpsw_emac0: slave@200 {
-					/* Filled in by U-Boot */
-					mac-address = [ 00 00 00 00 00 00 ];
-					phys = <&phy_gmii_sel 1 1>;
-				};
-
-				cpsw_emac1: slave@300 {
-					/* Filled in by U-Boot */
-					mac-address = [ 00 00 00 00 00 00 ];
-					phys = <&phy_gmii_sel 2 1>;
-				};
-			};
-
-			mac_sw: switch@0 {
-				compatible = "ti,am335x-cpsw-switch", "ti,cpsw-switch";
-				reg = <0x0 0x4000>;
-				ranges = <0 0 0x4000>;
-				clocks = <&cpsw_125mhz_gclk>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				syscon = <&scm_conf>;
-				status = "disabled";
-
-				interrupts = <40 41 42 43>;
-				interrupt-names = "rx_thresh", "rx", "tx", "misc";
-
-				ethernet-ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					cpsw_port1: port@1 {
-						reg = <1>;
-						label = "port1";
-						mac-address = [ 00 00 00 00 00 00 ];
-						phys = <&phy_gmii_sel 1 1>;
-					};
-
-					cpsw_port2: port@2 {
-						reg = <2>;
-						label = "port2";
-						mac-address = [ 00 00 00 00 00 00 ];
-						phys = <&phy_gmii_sel 2 1>;
-					};
-				};
-
-				davinci_mdio_sw: mdio@1000 {
-					compatible = "ti,cpsw-mdio","ti,davinci_mdio";
-					clocks = <&cpsw_125mhz_gclk>;
-					clock-names = "fck";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					bus_freq = <1000000>;
-					reg = <0x1000 0x100>;
-				};
-
-				cpts {
-					clocks = <&cpsw_cpts_rft_clk>;
-					clock-names = "cpts";
-				};
-			};
-		};
-
-		target-module@180000 {			/* 0x4a180000, ap 5 10.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x180000 0x20000>;
-		};
-
-		target-module@200000 {			/* 0x4a200000, ap 7 02.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x200000 0x80000>;
-		};
-
-		pruss_tm: target-module@300000 {	/* 0x4a300000, ap 9 04.0 */
-			compatible = "ti,sysc-pruss", "ti,sysc";
-			reg = <0x326000 0x4>,
-			      <0x326004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
-					 SYSC_PRUSS_SUB_MWAIT)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>;
-			clock-names = "fck";
-			resets = <&prm_per 1>;
-			reset-names = "rstctrl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x300000 0x80000>;
-			status = "disabled";
-
-			pruss: pruss@0 {
-				compatible = "ti,am3356-pruss";
-				reg = <0x0 0x80000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges;
-
-				pruss_mem: memories@0 {
-					reg = <0x0 0x2000>,
-					      <0x2000 0x2000>,
-					      <0x10000 0x3000>;
-					reg-names = "dram0", "dram1",
-						    "shrdram2";
-				};
-
-				pruss_cfg: cfg@26000 {
-					compatible = "ti,pruss-cfg", "syscon";
-					reg = <0x26000 0x2000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x26000 0x2000>;
-
-					clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						pruss_iepclk_mux: iepclk-mux@30 {
-							reg = <0x30>;
-							#clock-cells = <0>;
-							clocks = <&l3_gclk>,        /* icss_iep_gclk */
-								 <&pruss_ocp_gclk>; /* icss_ocp_gclk */
-						};
-					};
-				};
-
-				pruss_mii_rt: mii-rt@32000 {
-					compatible = "ti,pruss-mii", "syscon";
-					reg = <0x32000 0x58>;
-				};
-
-				pruss_intc: interrupt-controller@20000 {
-					compatible = "ti,pruss-intc";
-					reg = <0x20000 0x2000>;
-					interrupts = <20 21 22 23 24 25 26 27>;
-					interrupt-names = "host_intr0", "host_intr1",
-							  "host_intr2", "host_intr3",
-							  "host_intr4", "host_intr5",
-							  "host_intr6", "host_intr7";
-					interrupt-controller;
-					#interrupt-cells = <3>;
-				};
-
-				pru0: pru@34000 {
-					compatible = "ti,am3356-pru";
-					reg = <0x34000 0x2000>,
-					      <0x22000 0x400>,
-					      <0x22400 0x100>;
-					reg-names = "iram", "control", "debug";
-					firmware-name = "am335x-pru0-fw";
-				};
-
-				pru1: pru@38000 {
-					compatible = "ti,am3356-pru";
-					reg = <0x38000 0x2000>,
-					      <0x24000 0x400>,
-					      <0x24400 0x100>;
-					reg-names = "iram", "control", "debug";
-					firmware-name = "am335x-pru1-fw";
-				};
-
-				pruss_mdio: mdio@32400 {
-					compatible = "ti,davinci_mdio";
-					reg = <0x32400 0x90>;
-					clocks = <&dpll_core_m4_ck>;
-					clock-names = "fck";
-					bus_freq = <1000000>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					status = "disabled";
-				};
-			};
-		};
-	};
-};
-
-&l4_mpuss {						/* 0x4b140000 */
-	compatible = "ti,am33xx-l4-mpuss", "simple-bus";
-	reg = <0x4b144400 0x100>,
-	      <0x4b144800 0x400>;
-	reg-names = "la", "ap";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x4b140000 0x008000>;	/* segment 0 */
-
-	segment@0 {					/* 0x4b140000 */
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00004800 0x00004800 0x000400>,	/* ap 0 */
-			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
-			 <0x00002000 0x00002000 0x001000>,	/* ap 2 */
-			 <0x00004000 0x00004000 0x000400>,	/* ap 3 */
-			 <0x00005000 0x00005000 0x000400>,	/* ap 4 */
-			 <0x00000000 0x00000000 0x001000>,	/* ap 5 */
-			 <0x00003000 0x00003000 0x001000>,	/* ap 6 */
-			 <0x00000800 0x00000800 0x000800>;	/* ap 7 */
-
-		target-module@0 {			/* 0x4b140000, ap 5 02.2 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00000000 0x00001000>,
-				 <0x00001000 0x00001000 0x00001000>,
-				 <0x00002000 0x00002000 0x00001000>;
-		};
-
-		target-module@3000 {			/* 0x4b143000, ap 6 04.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3000 0x1000>;
-		};
-	};
-};
-
-&l4_per {						/* 0x48000000 */
-	compatible = "ti,am33xx-l4-per", "simple-pm-bus";
-	power-domains = <&prm_per>;
-	clocks = <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x48000000 0x800>,
-	      <0x48000800 0x800>,
-	      <0x48001000 0x400>,
-	      <0x48001400 0x400>,
-	      <0x48001800 0x400>,
-	      <0x48001c00 0x400>;
-	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x48000000 0x100000>,	/* segment 0 */
-		 <0x00100000 0x48100000 0x100000>,	/* segment 1 */
-		 <0x00200000 0x48200000 0x100000>,	/* segment 2 */
-		 <0x00300000 0x48300000 0x100000>,	/* segment 3 */
-		 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
-		 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
-
-	segment@0 {					/* 0x48000000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
-			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
-			 <0x00001400 0x00001400 0x000400>,	/* ap 3 */
-			 <0x00001800 0x00001800 0x000400>,	/* ap 4 */
-			 <0x00001c00 0x00001c00 0x000400>,	/* ap 5 */
-			 <0x00008000 0x00008000 0x001000>,	/* ap 6 */
-			 <0x00009000 0x00009000 0x001000>,	/* ap 7 */
-			 <0x00016000 0x00016000 0x001000>,	/* ap 8 */
-			 <0x00017000 0x00017000 0x001000>,	/* ap 9 */
-			 <0x00022000 0x00022000 0x001000>,	/* ap 10 */
-			 <0x00023000 0x00023000 0x001000>,	/* ap 11 */
-			 <0x00024000 0x00024000 0x001000>,	/* ap 12 */
-			 <0x00025000 0x00025000 0x001000>,	/* ap 13 */
-			 <0x0002a000 0x0002a000 0x001000>,	/* ap 14 */
-			 <0x0002b000 0x0002b000 0x001000>,	/* ap 15 */
-			 <0x00038000 0x00038000 0x002000>,	/* ap 16 */
-			 <0x0003a000 0x0003a000 0x001000>,	/* ap 17 */
-			 <0x00014000 0x00014000 0x001000>,	/* ap 18 */
-			 <0x00015000 0x00015000 0x001000>,	/* ap 19 */
-			 <0x0003c000 0x0003c000 0x002000>,	/* ap 20 */
-			 <0x0003e000 0x0003e000 0x001000>,	/* ap 21 */
-			 <0x00040000 0x00040000 0x001000>,	/* ap 22 */
-			 <0x00041000 0x00041000 0x001000>,	/* ap 23 */
-			 <0x00042000 0x00042000 0x001000>,	/* ap 24 */
-			 <0x00043000 0x00043000 0x001000>,	/* ap 25 */
-			 <0x00044000 0x00044000 0x001000>,	/* ap 26 */
-			 <0x00045000 0x00045000 0x001000>,	/* ap 27 */
-			 <0x00046000 0x00046000 0x001000>,	/* ap 28 */
-			 <0x00047000 0x00047000 0x001000>,	/* ap 29 */
-			 <0x00048000 0x00048000 0x001000>,	/* ap 30 */
-			 <0x00049000 0x00049000 0x001000>,	/* ap 31 */
-			 <0x0004c000 0x0004c000 0x001000>,	/* ap 32 */
-			 <0x0004d000 0x0004d000 0x001000>,	/* ap 33 */
-			 <0x00050000 0x00050000 0x002000>,	/* ap 34 */
-			 <0x00052000 0x00052000 0x001000>,	/* ap 35 */
-			 <0x00060000 0x00060000 0x001000>,	/* ap 36 */
-			 <0x00061000 0x00061000 0x001000>,	/* ap 37 */
-			 <0x00080000 0x00080000 0x010000>,	/* ap 38 */
-			 <0x00090000 0x00090000 0x001000>,	/* ap 39 */
-			 <0x000a0000 0x000a0000 0x010000>,	/* ap 40 */
-			 <0x000b0000 0x000b0000 0x001000>,	/* ap 41 */
-			 <0x00030000 0x00030000 0x001000>,	/* ap 77 */
-			 <0x00031000 0x00031000 0x001000>,	/* ap 78 */
-			 <0x0004a000 0x0004a000 0x001000>,	/* ap 85 */
-			 <0x0004b000 0x0004b000 0x001000>,	/* ap 86 */
-			 <0x000c8000 0x000c8000 0x001000>,	/* ap 87 */
-			 <0x000c9000 0x000c9000 0x001000>,	/* ap 88 */
-			 <0x000cc000 0x000cc000 0x001000>,	/* ap 89 */
-			 <0x000cd000 0x000cd000 0x001000>,	/* ap 90 */
-			 <0x000ca000 0x000ca000 0x001000>,	/* ap 91 */
-			 <0x000cb000 0x000cb000 0x001000>,	/* ap 92 */
-			 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
-			 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
-
-		target-module@8000 {			/* 0x48008000, ap 6 10.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8000 0x1000>;
-		};
-
-		target-module@14000 {			/* 0x48014000, ap 18 58.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x14000 0x1000>;
-		};
-
-		target-module@16000 {			/* 0x48016000, ap 8 3c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x16000 0x1000>;
-		};
-
-		target-module@22000 {			/* 0x48022000, ap 10 12.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x22050 0x4>,
-			      <0x22054 0x4>,
-			      <0x22058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x22000 0x1000>;
-
-			uart1: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				clock-frequency = <48000000>;
-				reg = <0x0 0x1000>;
-				interrupts = <73>;
-				status = "disabled";
-				dmas = <&edma 28 0>, <&edma 29 0>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@24000 {			/* 0x48024000, ap 12 14.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x24050 0x4>,
-			      <0x24054 0x4>,
-			      <0x24058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_UART3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x24000 0x1000>;
-
-			uart2: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				clock-frequency = <48000000>;
-				reg = <0x0 0x1000>;
-				interrupts = <74>;
-				status = "disabled";
-				dmas = <&edma 30 0>, <&edma 31 0>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@2a000 {			/* 0x4802a000, ap 14 2a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x2a000 0x8>,
-			      <0x2a010 0x8>,
-			      <0x2a090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_I2C2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2a000 0x1000>;
-
-			i2c1: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x0 0x1000>;
-				interrupts = <71>;
-				status = "disabled";
-			};
-		};
-
-		target-module@30000 {			/* 0x48030000, ap 77 08.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x30000 0x4>,
-			      <0x30110 0x4>,
-			      <0x30114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_SPI0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x30000 0x1000>;
-
-			spi0: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x0 0x400>;
-				interrupts = <65>;
-				ti,spi-num-cs = <2>;
-				dmas = <&edma 16 0
-					&edma 17 0
-					&edma 18 0
-					&edma 19 0>;
-				dma-names = "tx0", "rx0", "tx1", "rx1";
-				status = "disabled";
-			};
-		};
-
-		target-module@38000 {			/* 0x48038000, ap 16 02.0 */
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x38000 0x4>,
-			      <0x38004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): per_pwrdm, l3s_clkdm */
-			clocks = <&l3s_clkctrl AM3_L3S_MCASP0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x38000 0x2000>,
-				 <0x46000000 0x46000000 0x400000>;
-
-			mcasp0: mcasp@0 {
-				compatible = "ti,am33xx-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x46000000 0x400000>;
-				reg-names = "mpu", "dat";
-				interrupts = <80>, <81>;
-				interrupt-names = "tx", "rx";
-				status = "disabled";
-				dmas = <&edma 8 2>,
-					<&edma 9 2>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@3c000 {			/* 0x4803c000, ap 20 32.0 */
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x3c000 0x4>,
-			      <0x3c004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): per_pwrdm, l3s_clkdm */
-			clocks = <&l3s_clkctrl AM3_L3S_MCASP1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3c000 0x2000>,
-				 <0x46400000 0x46400000 0x400000>;
-
-			mcasp1: mcasp@0 {
-				compatible = "ti,am33xx-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x46400000 0x400000>;
-				reg-names = "mpu", "dat";
-				interrupts = <82>, <83>;
-				interrupt-names = "tx", "rx";
-				status = "disabled";
-				dmas = <&edma 10 2>,
-					<&edma 11 2>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		timer2_target: target-module@40000 {	/* 0x48040000, ap 22 1e.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x40000 0x4>,
-			      <0x40010 0x4>,
-			      <0x40014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x40000 0x1000>;
-
-			timer2: timer@0 {
-				compatible = "ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <68>;
-				clocks = <&timer2_fck>;
-				clock-names = "fck";
-			};
-		};
-
-		target-module@42000 {			/* 0x48042000, ap 24 1c.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x42000 0x4>,
-			      <0x42010 0x4>,
-			      <0x42014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x42000 0x1000>;
-
-			timer3: timer@0 {
-				compatible = "ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <69>;
-			};
-		};
-
-		target-module@44000 {			/* 0x48044000, ap 26 26.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x44000 0x4>,
-			      <0x44010 0x4>,
-			      <0x44014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x44000 0x1000>;
-
-			timer4: timer@0 {
-				compatible = "ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <92>;
-				ti,timer-pwm;
-			};
-		};
-
-		target-module@46000 {			/* 0x48046000, ap 28 28.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x46000 0x4>,
-			      <0x46010 0x4>,
-			      <0x46014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x46000 0x1000>;
-
-			timer5: timer@0 {
-				compatible = "ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <93>;
-				ti,timer-pwm;
-			};
-		};
-
-		target-module@48000 {			/* 0x48048000, ap 30 22.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x48000 0x4>,
-			      <0x48010 0x4>,
-			      <0x48014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER6_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48000 0x1000>;
-
-			timer6: timer@0 {
-				compatible = "ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <94>;
-				ti,timer-pwm;
-			};
-		};
-
-		target-module@4a000 {			/* 0x4804a000, ap 85 60.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x4a000 0x4>,
-			      <0x4a010 0x4>,
-			      <0x4a014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER7_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4a000 0x1000>;
-
-			timer7: timer@0 {
-				compatible = "ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <95>;
-				ti,timer-pwm;
-			};
-		};
-
-		target-module@4c000 {			/* 0x4804c000, ap 32 36.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4c000 0x4>,
-			      <0x4c010 0x4>,
-			      <0x4c114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 0>,
-				 <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 18>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4c000 0x1000>;
-
-			gpio1: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				gpio-ranges =   <&am33xx_pinmux  0  0  8>,
-						<&am33xx_pinmux  8 90  4>,
-						<&am33xx_pinmux 12 12 16>,
-						<&am33xx_pinmux 28 30  4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x1000>;
-				interrupts = <98>;
-			};
-		};
-
-		target-module@50000 {			/* 0x48050000, ap 34 2c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x50000 0x2000>;
-		};
-
-		target-module@60000 {			/* 0x48060000, ap 36 0c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x602fc 0x4>,
-			      <0x60110 0x4>,
-			      <0x60114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_MMC1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x60000 0x1000>;
-
-			mmc1: mmc@0 {
-				compatible = "ti,am335-sdhci";
-				ti,needs-special-reset;
-				dmas = <&edma 24 0>, <&edma 25 0>;
-				dma-names = "tx", "rx";
-				interrupts = <64>;
-				reg = <0x0 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		target-module@80000 {			/* 0x48080000, ap 38 18.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x80000 0x4>,
-			      <0x80010 0x4>,
-			      <0x80014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_ELM_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x80000 0x10000>;
-
-			elm: elm@0 {
-				compatible = "ti,am3352-elm";
-				reg = <0x0 0x2000>;
-				interrupts = <4>;
-				status = "disabled";
-			};
-		};
-
-		target-module@a0000 {			/* 0x480a0000, ap 40 5e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa0000 0x10000>;
-		};
-
-		target-module@c8000 {			/* 0x480c8000, ap 87 06.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xc8000 0x4>,
-			      <0xc8010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_MAILBOX_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc8000 0x1000>;
-
-			mailbox: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <77>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <8>;
-				mbox_wkupm3: mbox-wkup-m3 {
-					ti,mbox-send-noirq;
-					ti,mbox-tx = <0 0 0>;
-					ti,mbox-rx = <0 0 3>;
-				};
-			};
-		};
-
-		target-module@ca000 {			/* 0x480ca000, ap 91 40.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xca000 0x4>,
-			      <0xca010 0x4>,
-			      <0xca014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_SPINLOCK_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xca000 0x1000>;
-
-			hwspinlock: spinlock@0 {
-				compatible = "ti,omap4-hwspinlock";
-				reg = <0x0 0x1000>;
-				#hwlock-cells = <1>;
-			};
-		};
-
-		target-module@cc000 {			/* 0x480cc000, ap 89 0e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xcc000 0x1000>;
-		};
-	};
-
-	segment@100000 {					/* 0x48100000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0008c000 0x0018c000 0x001000>,	/* ap 42 */
-			 <0x0008d000 0x0018d000 0x001000>,	/* ap 43 */
-			 <0x0008e000 0x0018e000 0x001000>,	/* ap 44 */
-			 <0x0008f000 0x0018f000 0x001000>,	/* ap 45 */
-			 <0x0009c000 0x0019c000 0x001000>,	/* ap 46 */
-			 <0x0009d000 0x0019d000 0x001000>,	/* ap 47 */
-			 <0x000a6000 0x001a6000 0x001000>,	/* ap 48 */
-			 <0x000a7000 0x001a7000 0x001000>,	/* ap 49 */
-			 <0x000a8000 0x001a8000 0x001000>,	/* ap 50 */
-			 <0x000a9000 0x001a9000 0x001000>,	/* ap 51 */
-			 <0x000aa000 0x001aa000 0x001000>,	/* ap 52 */
-			 <0x000ab000 0x001ab000 0x001000>,	/* ap 53 */
-			 <0x000ac000 0x001ac000 0x001000>,	/* ap 54 */
-			 <0x000ad000 0x001ad000 0x001000>,	/* ap 55 */
-			 <0x000ae000 0x001ae000 0x001000>,	/* ap 56 */
-			 <0x000af000 0x001af000 0x001000>,	/* ap 57 */
-			 <0x000b0000 0x001b0000 0x010000>,	/* ap 58 */
-			 <0x000c0000 0x001c0000 0x001000>,	/* ap 59 */
-			 <0x000cc000 0x001cc000 0x002000>,	/* ap 60 */
-			 <0x000ce000 0x001ce000 0x002000>,	/* ap 61 */
-			 <0x000d0000 0x001d0000 0x002000>,	/* ap 62 */
-			 <0x000d2000 0x001d2000 0x002000>,	/* ap 63 */
-			 <0x000d8000 0x001d8000 0x001000>,	/* ap 64 */
-			 <0x000d9000 0x001d9000 0x001000>,	/* ap 65 */
-			 <0x000a0000 0x001a0000 0x001000>,	/* ap 79 */
-			 <0x000a1000 0x001a1000 0x001000>,	/* ap 80 */
-			 <0x000a2000 0x001a2000 0x001000>,	/* ap 81 */
-			 <0x000a3000 0x001a3000 0x001000>,	/* ap 82 */
-			 <0x000a4000 0x001a4000 0x001000>,	/* ap 83 */
-			 <0x000a5000 0x001a5000 0x001000>;	/* ap 84 */
-
-		target-module@8c000 {			/* 0x4818c000, ap 42 04.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8c000 0x1000>;
-		};
-
-		target-module@8e000 {			/* 0x4818e000, ap 44 0a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8e000 0x1000>;
-		};
-
-		target-module@9c000 {			/* 0x4819c000, ap 46 5a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x9c000 0x8>,
-			      <0x9c010 0x8>,
-			      <0x9c090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_I2C3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x9c000 0x1000>;
-
-			i2c2: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x0 0x1000>;
-				interrupts = <30>;
-				status = "disabled";
-			};
-		};
-
-		target-module@a0000 {			/* 0x481a0000, ap 79 24.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xa0000 0x4>,
-			      <0xa0110 0x4>,
-			      <0xa0114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_SPI1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa0000 0x1000>;
-
-			spi1: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x0 0x400>;
-				interrupts = <125>;
-				ti,spi-num-cs = <2>;
-				dmas = <&edma 42 0
-					&edma 43 0
-					&edma 44 0
-					&edma 45 0>;
-				dma-names = "tx0", "rx0", "tx1", "rx1";
-				status = "disabled";
-			};
-		};
-
-		target-module@a2000 {			/* 0x481a2000, ap 81 2e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa2000 0x1000>;
-		};
-
-		target-module@a4000 {			/* 0x481a4000, ap 83 30.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa4000 0x1000>;
-		};
-
-		target-module@a6000 {			/* 0x481a6000, ap 48 16.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xa6050 0x4>,
-			      <0xa6054 0x4>,
-			      <0xa6058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_UART4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa6000 0x1000>;
-
-			uart3: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				clock-frequency = <48000000>;
-				reg = <0x0 0x1000>;
-				interrupts = <44>;
-				status = "disabled";
-			};
-		};
-
-		target-module@a8000 {			/* 0x481a8000, ap 50 20.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xa8050 0x4>,
-			      <0xa8054 0x4>,
-			      <0xa8058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_UART5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa8000 0x1000>;
-
-			uart4: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				clock-frequency = <48000000>;
-				reg = <0x0 0x1000>;
-				interrupts = <45>;
-				status = "disabled";
-			};
-		};
-
-		target-module@aa000 {			/* 0x481aa000, ap 52 1a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xaa050 0x4>,
-			      <0xaa054 0x4>,
-			      <0xaa058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_UART6_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xaa000 0x1000>;
-
-			uart5: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				clock-frequency = <48000000>;
-				reg = <0x0 0x1000>;
-				interrupts = <46>;
-				status = "disabled";
-			};
-		};
-
-		target-module@ac000 {			/* 0x481ac000, ap 54 38.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xac000 0x4>,
-			      <0xac010 0x4>,
-			      <0xac114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 0>,
-				 <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 18>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xac000 0x1000>;
-
-			gpio2: gpio@0 {
-				compatible = "ti,omap4-gpio";
-                                gpio-ranges =	<&am33xx_pinmux  0 34 18>,
-						<&am33xx_pinmux 18 77  4>,
-						<&am33xx_pinmux 22 56 10>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x1000>;
-				interrupts = <32>;
-			};
-		};
-
-		gpio3_target: target-module@ae000 {		/* 0x481ae000, ap 56 3a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xae000 0x4>,
-			      <0xae010 0x4>,
-			      <0xae114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 0>,
-				 <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 18>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xae000 0x1000>;
-
-			gpio3: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				gpio-ranges =	<&am33xx_pinmux  0  66 5>,
-						<&am33xx_pinmux  5  98 2>,
-						<&am33xx_pinmux  7  75 2>,
-						<&am33xx_pinmux 13 141 1>,
-						<&am33xx_pinmux 14 100 8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x1000>;
-				interrupts = <62>;
-			};
-		};
-
-		target-module@b0000 {			/* 0x481b0000, ap 58 50.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb0000 0x10000>;
-		};
-
-		target-module@cc000 {			/* 0x481cc000, ap 60 46.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xcc020 0x4>;
-			reg-names = "rev";
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
-				 <&dcan0_fck>;
-			clock-names = "fck", "osc";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xcc000 0x2000>;
-
-			dcan0: can@0 {
-				compatible = "ti,am3352-d_can";
-				reg = <0x0 0x2000>;
-				clocks = <&dcan0_fck>;
-				clock-names = "fck";
-				syscon-raminit = <&scm_conf 0x644 0>;
-				interrupts = <52>;
-				status = "disabled";
-			};
-		};
-
-		target-module@d0000 {			/* 0x481d0000, ap 62 42.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xd0020 0x4>;
-			reg-names = "rev";
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
-				 <&dcan1_fck>;
-			clock-names = "fck", "osc";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xd0000 0x2000>;
-
-			dcan1: can@0 {
-				compatible = "ti,am3352-d_can";
-				reg = <0x0 0x2000>;
-				clocks = <&dcan1_fck>;
-				clock-names = "fck";
-				syscon-raminit = <&scm_conf 0x644 1>;
-				interrupts = <55>;
-				status = "disabled";
-			};
-		};
-
-		target-module@d8000 {			/* 0x481d8000, ap 64 66.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xd82fc 0x4>,
-			      <0xd8110 0x4>,
-			      <0xd8114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_MMC2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xd8000 0x1000>;
-
-			mmc2: mmc@0 {
-				compatible = "ti,am335-sdhci";
-				ti,needs-special-reset;
-				dmas = <&edma 2 0
-					&edma 3 0>;
-				dma-names = "tx", "rx";
-				interrupts = <28>;
-				reg = <0x0 0x1000>;
-				status = "disabled";
-			};
-		};
-	};
-
-	segment@200000 {					/* 0x48200000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00200000 0x010000>;
-
-		target-module@0 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			power-domains = <&prm_mpu>;
-			clocks = <&mpu_clkctrl AM3_MPU_MPU_CLKCTRL 0>;
-			clock-names = "fck";
-			ti,no-idle;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0x10000>;
-
-			mpu@0 {
-				compatible = "ti,omap3-mpu";
-				pm-sram = <&pm_sram_code
-					   &pm_sram_data>;
-			};
-		};
-	};
-
-	segment@300000 {					/* 0x48300000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00300000 0x001000>,	/* ap 66 */
-			 <0x00001000 0x00301000 0x001000>,	/* ap 67 */
-			 <0x00002000 0x00302000 0x001000>,	/* ap 68 */
-			 <0x00003000 0x00303000 0x001000>,	/* ap 69 */
-			 <0x00004000 0x00304000 0x001000>,	/* ap 70 */
-			 <0x00005000 0x00305000 0x001000>,	/* ap 71 */
-			 <0x0000e000 0x0030e000 0x001000>,	/* ap 72 */
-			 <0x0000f000 0x0030f000 0x001000>,	/* ap 73 */
-			 <0x00018000 0x00318000 0x004000>,	/* ap 74 */
-			 <0x0001c000 0x0031c000 0x001000>,	/* ap 75 */
-			 <0x00010000 0x00310000 0x002000>,	/* ap 76 */
-			 <0x00012000 0x00312000 0x001000>,	/* ap 93 */
-			 <0x00015000 0x00315000 0x001000>,	/* ap 94 */
-			 <0x00016000 0x00316000 0x001000>,	/* ap 95 */
-			 <0x00017000 0x00317000 0x001000>,	/* ap 96 */
-			 <0x00013000 0x00313000 0x001000>,	/* ap 97 */
-			 <0x00014000 0x00314000 0x001000>,	/* ap 98 */
-			 <0x00020000 0x00320000 0x001000>,	/* ap 99 */
-			 <0x00021000 0x00321000 0x001000>,	/* ap 100 */
-			 <0x00022000 0x00322000 0x001000>,	/* ap 101 */
-			 <0x00023000 0x00323000 0x001000>,	/* ap 102 */
-			 <0x00024000 0x00324000 0x001000>,	/* ap 103 */
-			 <0x00025000 0x00325000 0x001000>;	/* ap 104 */
-
-		target-module@0 {			/* 0x48300000, ap 66 48.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x0 0x4>,
-			      <0x4 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x1000>;
-
-			epwmss0: epwmss@0 {
-				compatible = "ti,am33xx-pwmss";
-				reg = <0x0 0x10>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				status = "disabled";
-				ranges = <0 0 0x1000>;
-
-				ecap0: pwm@100 {
-					compatible = "ti,am3352-ecap";
-					#pwm-cells = <3>;
-					reg = <0x100 0x80>;
-					clocks = <&l4ls_gclk>;
-					clock-names = "fck";
-					status = "disabled";
-				};
-
-				eqep0: counter@180 {
-					compatible = "ti,am3352-eqep";
-					reg = <0x180 0x80>;
-					clocks = <&l4ls_gclk>;
-					clock-names = "sysclkout";
-					interrupts = <79>;
-					status = "disabled";
-				};
-
-				ehrpwm0: pwm@200 {
-					compatible = "ti,am3352-ehrpwm";
-					#pwm-cells = <3>;
-					reg = <0x200 0x80>;
-					clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
-					clock-names = "tbclk", "fck";
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@2000 {			/* 0x48302000, ap 68 52.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x2000 0x4>,
-			      <0x2004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2000 0x1000>;
-
-			epwmss1: epwmss@0 {
-				compatible = "ti,am33xx-pwmss";
-				reg = <0x0 0x10>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				status = "disabled";
-				ranges = <0 0 0x1000>;
-
-				ecap1: pwm@100 {
-					compatible = "ti,am3352-ecap";
-					#pwm-cells = <3>;
-					reg = <0x100 0x80>;
-					clocks = <&l4ls_gclk>;
-					clock-names = "fck";
-					status = "disabled";
-				};
-
-				eqep1: counter@180 {
-					compatible = "ti,am3352-eqep";
-					reg = <0x180 0x80>;
-					clocks = <&l4ls_gclk>;
-					clock-names = "sysclkout";
-					interrupts = <88>;
-					status = "disabled";
-				};
-
-				ehrpwm1: pwm@200 {
-					compatible = "ti,am3352-ehrpwm";
-					#pwm-cells = <3>;
-					reg = <0x200 0x80>;
-					clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
-					clock-names = "tbclk", "fck";
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@4000 {			/* 0x48304000, ap 70 44.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x4000 0x4>,
-			      <0x4004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-
-			epwmss2: epwmss@0 {
-				compatible = "ti,am33xx-pwmss";
-				reg = <0x0 0x10>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				status = "disabled";
-				ranges = <0 0 0x1000>;
-
-				ecap2: pwm@100 {
-					compatible = "ti,am3352-ecap";
-					#pwm-cells = <3>;
-					reg = <0x100 0x80>;
-					clocks = <&l4ls_gclk>;
-					clock-names = "fck";
-					status = "disabled";
-				};
-
-				eqep2: counter@180 {
-					compatible = "ti,am3352-eqep";
-					reg = <0x180 0x80>;
-					clocks = <&l4ls_gclk>;
-					clock-names = "sysclkout";
-					interrupts = <89>;
-					status = "disabled";
-				};
-
-				ehrpwm2: pwm@200 {
-					compatible = "ti,am3352-ehrpwm";
-					#pwm-cells = <3>;
-					reg = <0x200 0x80>;
-					clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
-					clock-names = "tbclk", "fck";
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@e000 {			/* 0x4830e000, ap 72 4a.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xe000 0x4>,
-			      <0xe054 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): per_pwrdm, lcdc_clkdm */
-			clocks = <&lcdc_clkctrl AM3_LCDC_LCDC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xe000 0x1000>;
-
-			lcdc: lcdc@0 {
-				compatible = "ti,am33xx-tilcdc";
-				reg = <0x0 0x1000>;
-				interrupts = <36>;
-				status = "disabled";
-			};
-		};
-
-		target-module@10000 {			/* 0x48310000, ap 76 4e.1 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x11fe0 0x4>,
-			      <0x11fe4 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_L4LS_RNG_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x10000 0x2000>;
-
-			rng: rng@0 {
-				compatible = "ti,omap4-rng";
-				reg = <0x0 0x2000>;
-				interrupts = <111>;
-			};
-		};
-
-		target-module@13000 {			/* 0x48313000, ap 97 62.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x13000 0x1000>;
-		};
-
-		target-module@15000 {			/* 0x48315000, ap 94 56.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00015000 0x00001000>,
-				 <0x00001000 0x00016000 0x00001000>;
-		};
-
-		target-module@18000 {			/* 0x48318000, ap 74 4c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x18000 0x4000>;
-		};
-
-		target-module@20000 {			/* 0x48320000, ap 99 34.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x20000 0x1000>;
-		};
-
-		target-module@22000 {			/* 0x48322000, ap 101 3e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x22000 0x1000>;
-		};
-
-		target-module@24000 {			/* 0x48324000, ap 103 68.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x24000 0x1000>;
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
deleted file mode 100644
index 32d397b3950b9..0000000000000
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ /dev/null
@@ -1,714 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for AM33XX SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/am33xx.h>
-#include <dt-bindings/clock/am3.h>
-
-/ {
-	compatible = "ti,am33xx";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		d-can0 = &dcan0;
-		d-can1 = &dcan1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		phy0 = &usb0_phy;
-		phy1 = &usb1_phy;
-		ethernet0 = &cpsw_port1;
-		ethernet1 = &cpsw_port2;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		mmc0 = &mmc1;
-		mmc1 = &mmc2;
-		mmc2 = &mmc3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			enable-method = "ti,am3352";
-			device_type = "cpu";
-			reg = <0>;
-
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-			cpu-idle-states = <&mpu_gate>;
-		};
-
-		idle-states {
-			mpu_gate: mpu_gate {
-				compatible = "arm,idle-state";
-				entry-latency-us = <40>;
-				exit-latency-us = <90>;
-				min-residency-us = <300>;
-				ti,idle-wkup-m3;
-			};
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2-ti-cpu";
-		syscon = <&scm_conf>;
-
-		/*
-		 * The three following nodes are marked with opp-suspend
-		 * because the can not be enabled simultaneously on a
-		 * single SoC.
-		 */
-		opp50-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <950000 931000 969000>;
-			opp-supported-hw = <0x06 0x0010>;
-			opp-suspend;
-		};
-
-		opp100-275000000 {
-			opp-hz = /bits/ 64 <275000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x01 0x00FF>;
-			opp-suspend;
-		};
-
-		opp100-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x06 0x0020>;
-			opp-suspend;
-		};
-
-		opp100-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		opp100-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x06 0x0040>;
-		};
-
-		opp120-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1200000 1176000 1224000>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		opp120-720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1200000 1176000 1224000>;
-			opp-supported-hw = <0x06 0x0080>;
-		};
-
-		oppturbo-720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1260000 1234800 1285200>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		oppturbo-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1260000 1234800 1285200>;
-			opp-supported-hw = <0x06 0x0100>;
-		};
-
-		oppnitro-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1325000 1298500 1351500>;
-			opp-supported-hw = <0x04 0x0200>;
-		};
-	};
-
-	target-module@4b000000 {
-		compatible = "ti,sysc-omap4-simple", "ti,sysc";
-		clocks = <&l3_clkctrl AM3_L3_L3_INSTR_CLKCTRL 0>;
-		clock-names = "fck";
-		ti,no-idle;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x4b000000 0x1000000>;
-
-		target-module@140000 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			clocks = <&l3_aon_clkctrl AM3_L3_AON_DEBUGSS_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x140000 0xec0000>;
-
-			pmu@0 {
-				compatible = "arm,cortex-a8-pmu";
-				interrupts = <3>;
-			};
-		};
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-	};
-
-	/*
-	 * XXX: Use a flat representation of the AM33XX interconnect.
-	 * The real AM33XX interconnect network is quite complex. Since
-	 * it will not bring real advantage to represent that in DT
-	 * for the moment, just use a fake OCP bus entry to represent
-	 * the whole bus hierarchy.
-	 */
-	ocp: ocp {
-		compatible = "simple-pm-bus";
-		power-domains = <&prm_per>;
-		clocks = <&l3_clkctrl AM3_L3_L3_MAIN_CLKCTRL 0>;
-		clock-names = "fck";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		l4_wkup: interconnect@44c00000 {
-		};
-		l4_per: interconnect@48000000 {
-		};
-		l4_fw: interconnect@47c00000 {
-		};
-		l4_fast: interconnect@4a000000 {
-		};
-		l4_mpuss: interconnect@4b140000 {
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,am33xx-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		target-module@49000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49000000 0x4>;
-			reg-names = "rev";
-			clocks = <&l3_clkctrl AM3_L3_TPCC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49000000 0x10000>;
-
-			edma: dma@0 {
-				compatible = "ti,edma3-tpcc";
-				reg = <0 0x10000>;
-				reg-names = "edma3_cc";
-				interrupts = <12 13 14>;
-				interrupt-names = "edma3_ccint", "edma3_mperr",
-						  "edma3_ccerrint";
-				dma-requests = <64>;
-				#dma-cells = <2>;
-
-				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-					   <&edma_tptc2 0>;
-
-				ti,edma-memcpy-channels = <20 21>;
-			};
-		};
-
-		target-module@49800000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49800000 0x4>,
-			      <0x49800010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&l3_clkctrl AM3_L3_TPTC0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49800000 0x100000>;
-
-			edma_tptc0: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <112>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@49900000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49900000 0x4>,
-			      <0x49900010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&l3_clkctrl AM3_L3_TPTC1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49900000 0x100000>;
-
-			edma_tptc1: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <113>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@49a00000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49a00000 0x4>,
-			      <0x49a00010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&l3_clkctrl AM3_L3_TPTC2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49a00000 0x100000>;
-
-			edma_tptc2: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <114>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@47810000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x478102fc 0x4>,
-			      <0x47810110 0x4>,
-			      <0x47810114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x47810000 0x1000>;
-
-			mmc3: mmc@0 {
-				compatible = "ti,am335-sdhci";
-				ti,needs-special-reset;
-				interrupts = <29>;
-				reg = <0x0 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		usb: target-module@47400000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x47400000 0x4>,
-			      <0x47400010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x47400000 0x8000>;
-
-			usb0_phy: usb-phy@1300 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x1300 0x100>;
-				reg-names = "phy";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-				#phy-cells = <0>;
-			};
-
-			usb0: usb@1400 {
-				compatible = "ti,musb-am33xx";
-				reg = <0x1400 0x400>,
-				      <0x1000 0x200>;
-				reg-names = "mc", "control";
-
-				interrupts = <18>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb0_phy>;
-
-				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
-					&cppi41dma  2 0 &cppi41dma  3 0
-					&cppi41dma  4 0 &cppi41dma  5 0
-					&cppi41dma  6 0 &cppi41dma  7 0
-					&cppi41dma  8 0 &cppi41dma  9 0
-					&cppi41dma 10 0 &cppi41dma 11 0
-					&cppi41dma 12 0 &cppi41dma 13 0
-					&cppi41dma 14 0 &cppi41dma  0 1
-					&cppi41dma  1 1 &cppi41dma  2 1
-					&cppi41dma  3 1 &cppi41dma  4 1
-					&cppi41dma  5 1 &cppi41dma  6 1
-					&cppi41dma  7 1 &cppi41dma  8 1
-					&cppi41dma  9 1 &cppi41dma 10 1
-					&cppi41dma 11 1 &cppi41dma 12 1
-					&cppi41dma 13 1 &cppi41dma 14 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			usb1_phy: usb-phy@1b00 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x1b00 0x100>;
-				reg-names = "phy";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-				#phy-cells = <0>;
-			};
-
-			usb1: usb@1800 {
-				compatible = "ti,musb-am33xx";
-				reg = <0x1c00 0x400>,
-				      <0x1800 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <19>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb1_phy>;
-
-				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
-					&cppi41dma 17 0 &cppi41dma 18 0
-					&cppi41dma 19 0 &cppi41dma 20 0
-					&cppi41dma 21 0 &cppi41dma 22 0
-					&cppi41dma 23 0 &cppi41dma 24 0
-					&cppi41dma 25 0 &cppi41dma 26 0
-					&cppi41dma 27 0 &cppi41dma 28 0
-					&cppi41dma 29 0 &cppi41dma 15 1
-					&cppi41dma 16 1 &cppi41dma 17 1
-					&cppi41dma 18 1 &cppi41dma 19 1
-					&cppi41dma 20 1 &cppi41dma 21 1
-					&cppi41dma 22 1 &cppi41dma 23 1
-					&cppi41dma 24 1 &cppi41dma 25 1
-					&cppi41dma 26 1 &cppi41dma 27 1
-					&cppi41dma 28 1 &cppi41dma 29 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			cppi41dma: dma-controller@2000 {
-				compatible = "ti,am3359-cppi41";
-				reg =  <0x0000 0x1000>,
-				       <0x2000 0x1000>,
-				       <0x3000 0x1000>,
-				       <0x4000 0x4000>;
-				reg-names = "glue", "controller", "scheduler", "queuemgr";
-				interrupts = <17>;
-				interrupt-names = "glue";
-				#dma-cells = <2>;
-				/* For backwards compatibility: */
-				#dma-channels = <30>;
-				dma-channels = <30>;
-				#dma-requests = <256>;
-				dma-requests = <256>;
-			};
-		};
-
-		target-module@40300000 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			clocks = <&l3_clkctrl AM3_L3_OCMCRAM_CLKCTRL 0>;
-			clock-names = "fck";
-			ti,no-idle;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x40300000 0x10000>;
-
-			ocmcram: sram@0 {
-				compatible = "mmio-sram";
-				reg = <0 0x10000>; /* 64k */
-				ranges = <0 0 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				pm_sram_code: pm-code-sram@0 {
-					compatible = "ti,sram";
-					reg = <0x0 0x1000>;
-					protect-exec;
-				};
-
-				pm_sram_data: pm-data-sram@1000 {
-					compatible = "ti,sram";
-					reg = <0x1000 0x1000>;
-					pool;
-				};
-			};
-		};
-
-		target-module@4c000000 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x4c000000 0x4>;
-			reg-names = "rev";
-			clocks = <&l3_clkctrl AM3_L3_EMIF_CLKCTRL 0>;
-			clock-names = "fck";
-			ti,no-idle;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4c000000 0x1000000>;
-
-			emif: emif@0 {
-				compatible = "ti,emif-am3352";
-				reg = <0 0x1000000>;
-				interrupts = <101>;
-				sram = <&pm_sram_code
-					&pm_sram_data>;
-			};
-		};
-
-		target-module@50000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x50000000 4>,
-			      <0x50000010 4>,
-			      <0x50000014 4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&l3s_clkctrl AM3_L3S_GPMC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
-				 <0x00000000 0x00000000 0x40000000>; /* data */
-
-			gpmc: gpmc@50000000 {
-				compatible = "ti,am3352-gpmc";
-				reg = <0x50000000 0x2000>;
-				interrupts = <100>;
-				dmas = <&edma 52 0>;
-				dma-names = "rxtx";
-				gpmc,num-cs = <7>;
-				gpmc,num-waitpins = <2>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				status = "disabled";
-			};
-		};
-
-		sham_target: target-module@53100000 {
-			compatible = "ti,sysc-omap3-sham", "ti,sysc";
-			reg = <0x53100100 0x4>,
-			      <0x53100110 0x4>,
-			      <0x53100114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l3_clkdm */
-			clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x53100000 0x1000>;
-
-			sham: sham@0 {
-				compatible = "ti,omap4-sham";
-				reg = <0 0x200>;
-				interrupts = <109>;
-				dmas = <&edma 36 0>;
-				dma-names = "rx";
-			};
-		};
-
-		aes_target: target-module@53500000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x53500080 0x4>,
-			      <0x53500084 0x4>,
-			      <0x53500088 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l3_clkdm */
-			clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x53500000 0x1000>;
-
-			aes: aes@0 {
-				compatible = "ti,omap4-aes";
-				reg = <0 0xa0>;
-				interrupts = <103>;
-				dmas = <&edma 6 0>,
-				       <&edma 5 0>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@56000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x5600fe00 0x4>,
-			      <0x5600fe10 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>;
-			clock-names = "fck";
-			power-domains = <&prm_gfx>;
-			resets = <&prm_gfx 0>;
-			reset-names = "rstctrl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x56000000 0x1000000>;
-
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
-		};
-	};
-};
-
-#include "am33xx-l4.dtsi"
-#include "am33xx-clocks.dtsi"
-
-&prcm {
-	prm_per: prm@c00 {
-		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
-		reg = <0xc00 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_wkup: prm@d00 {
-		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
-		reg = <0xd00 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_mpu: prm@e00 {
-		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
-		reg = <0xe00 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_device: prm@f00 {
-		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
-		reg = <0xf00 0x100>;
-		#reset-cells = <1>;
-	};
-
-	prm_rtc: prm@1000 {
-		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1000 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_gfx: prm@1100 {
-		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1100 0x100>;
-		#power-domain-cells = <0>;
-		#reset-cells = <1>;
-	};
-
-	prm_cefuse: prm@1200 {
-		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1200 0x100>;
-		#power-domain-cells = <0>;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer1_target {
-	clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>,
-		 <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>;
-	clock-names = "fck", "ick";
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&timer1_fck>;
-		assigned-clock-parents = <&sys_clkin_ck>;
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>,
-		 <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>;
-	clock-names = "fck", "ick";
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&timer2_fck>;
-		assigned-clock-parents = <&sys_clkin_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
deleted file mode 100644
index 3642cfc801941..0000000000000
--- a/arch/arm/boot/dts/am3517-craneboard.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * See craneboard.org for more details
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "am3517.dtsi"
-
-/ {
-	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
-	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;	/* 256 MB */
-	};
-
-	vbat: fixedregulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-};
-
-&davinci_emac {
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-&mmc1 {
-	vmmc-supply = <&vdd2_reg>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-&mmc3 {
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-#include "tps65910.dtsi"
-
-&omap3_pmx_core {
-	tps_pins: pinmux_tps_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
-		>;
-	};
-};
-
-&tps {
-	pinctrl-names = "default";
-	pinctrl-0 = <&tps_pins>;
-
-	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-	interrupt-parent = <&intc>;
-
-	ti,en-ck32k-xtal;
-
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		/*
-		 * Unused:
-		 * VDIG1=2.7V,300mA max
-		 * VDIG2=1.8V,300mA max
-		 */
-
-		vpll_reg: regulator@7 {
-			/* VDDS_DPLL_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			/* VDDS_SRAM_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			/* VDDA1P8V_USBPHY */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		/* VAUX33 unused */
-
-		vdac_reg: regulator@8 {
-			/* VDDA_DAC_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			/* VDDA3P3V_USBPHY */
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_CORE */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDDSHV_3V3 */
-			regulator-name = "vdd_shv";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		/* VDD3 unused */
-	};
-};
diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi
deleted file mode 100644
index 75ad42179aeeb..0000000000000
--- a/arch/arm/boot/dts/am3517-evm-ui.dtsi
+++ /dev/null
@@ -1,217 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2018 Logic PD, Inc - https://www.logicpd.com/
- */
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	codec1 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "tlv320aic23-hifi";
-
-		simple-audio-card,widgets =
-			"Microphone", "Mic In",
-			"Line", "Line In",
-			"Line", "Line Out";
-
-		simple-audio-card,routing =
-			"Line Out", "LOUT",
-			"Line Out", "ROUT",
-			"LLINEIN", "Line In",
-			"RLINEIN", "Line In",
-			"MICIN", "Mic In";
-
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_master>;
-		simple-audio-card,frame-master = <&sound_master>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcbsp1>;
-		};
-
-		sound_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic23_1>;
-			system-clock-frequency = <12000000>;
-		};
-	};
-
-	codec2 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "tlv320aic23-hifi";
-
-		simple-audio-card,widgets =
-			"Microphone", "Mic In",
-			"Line", "Line In",
-			"Line", "Line Out";
-
-		simple-audio-card,routing =
-			"Line Out", "LOUT",
-			"Line Out", "ROUT",
-			"LLINEIN", "Line In",
-			"RLINEIN", "Line In",
-			"MICIN", "Mic In";
-
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_master2>;
-		simple-audio-card,frame-master = <&sound_master2>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcbsp2>;
-		};
-
-		sound_master2: simple-audio-card,codec {
-			sound-dai = <&tlv320aic23_2>;
-			system-clock-frequency = <12000000>;
-		};
-	};
-
-	expander-keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		key-record {
-			label = "Record";
-			/* linux,code = <BTN_0>; */
-			gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
-		};
-
-		key-play {
-			label = "Play";
-			linux,code = <KEY_PLAY>;
-			gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
-		};
-
-		key-stop {
-			label = "Stop";
-			linux,code = <KEY_STOP>;
-			gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
-		};
-
-		key-fwd {
-			label = "FWD";
-			linux,code = <KEY_FASTFORWARD>;
-			gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
-		};
-
-		key-rwd {
-			label = "RWD";
-			linux,code = <KEY_REWIND>;
-			gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
-		};
-
-		key-shift {
-			label = "Shift";
-			linux,code = <KEY_LEFTSHIFT>;
-			gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
-		};
-
-		key-mode {
-			label = "Mode";
-			linux,code = <BTN_MODE>;
-			gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
-		};
-
-		key-menu {
-			label = "Menu";
-			linux,code = <KEY_MENU>;
-			gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
-		};
-
-		key-up {
-			label = "Up";
-			linux,code = <KEY_UP>;
-			gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
-		};
-
-		key-down {
-			label = "Down";
-			linux,code = <KEY_DOWN>;
-			gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&i2c2 {
-	/* Audio codecs */
-	tlv320aic23_1: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-		#sound-dai-cells = <0>;
-		status = "okay";
-	};
-
-	tlv320aic23_2: codec@1b {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1b>;
-		#sound-dai-cells = <0>;
-		status = "okay";
-	};
-};
-
-&i2c3 {
-	/* Audio codecs */
-	tlv320aic23_3: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-		#sound-dai-cells = <0>;
-		status = "okay";
-	};
-
-	/* GPIO Expanders */
-	tca6416_2: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		vcc-supply = <&vdd_io_reg>;
-	};
-
-	tca6416_3: gpio@21 {
-		compatible = "ti,tca6416";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		vcc-supply = <&vdd_io_reg>;
-	};
-
-	/* TVP5146 Analog Video decoder input */
-	tvp5146@5c {
-		compatible = "ti,tvp5146m2";
-		reg = <0x5c>;
-	};
-};
-
-&mcbsp1 {
-	status = "okay";
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-};
-
-&mcbsp2 {
-	status = "okay";
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-};
-
-&omap3_pmx_core {
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
-			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
-			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
-			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
-			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
-			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
-			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
deleted file mode 100644
index 11618aa501fc5..0000000000000
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ /dev/null
@@ -1,357 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "am3517.dtsi"
-#include "am3517-som.dtsi"
-#include "am3517-evm-ui.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
-	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	vmmc_fixed: vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		button-user {
-			label = "User Push Button";
-			linux,code = <BTN_0>;
-			gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
-		};
-
-		switch-1 {
-			label = "User Switch 1";
-			linux,code = <BTN_1>;
-			gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
-		};
-
-		switch-2 {
-			label = "User Switch 2";
-			linux,code = <BTN_2>;
-			gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
-		};
-
-		switch-3 {
-			label = "User Switch 3";
-			linux,code = <BTN_3>;
-			gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
-		};
-
-		switch-4 {
-			label = "User Switch 4";
-			linux,code = <BTN_4>;
-			gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
-		};
-
-		switch-5 {
-			label = "User Switch 5";
-			linux,code = <BTN_5>;
-			gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
-		};
-
-		switch-6 {
-			label = "User Switch 6";
-			linux,code = <BTN_6>;
-			gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
-		};
-
-		switch-7 {
-			label = "User Switch 7";
-			linux,code = <BTN_7>;
-			gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
-		};
-
-		switch-8 {
-			label = "User Switch 8";
-			linux,code = <BTN_8>;
-			gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-
-		user_led_1 {
-			label = "am3517evm:green:user_led_1";
-			gpios = <&tca6416 7 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		user_led_2 {
-			label = "am3517evm:green:user_led_2";
-			gpios = <&tca6416 6 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		user_led_3 {
-			label = "am3517evm:green:user_led_3";
-			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0"; /* SD/MMC card activity */
-		};
-
-		user_led_4 {
-			label = "am3517evm:green:user_led_4";
-			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	lcd0: display@0 {
-		/* This isn't the exact LCD, but the timings meet spec */
-		/* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
-		compatible = "newhaven,nhd-4.3-480272ef-atxl";
-		label = "15";
-		backlight = <&bl>;
-		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;	/* gpio176, lcd INI */
-		vcc-supply = <&vdd_io_reg>;
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	bl: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		power-supply = <&vdd_io_reg>;
-		pinctrl-0 = <&backlight_pins>;
-		pwms = <&pwm11 0 5000000 0>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
-	};
-
-	pwm11: pwm-11 {
-		compatible = "ti,omap-dmtimer-pwm";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm_pins>;
-		ti,timers = <&timer11>;
-		#pwm-cells = <3>;
-		ti,clock-source = <0x01>;
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		pinctrl-names = "default";
-		pinctrl-0 = <&hsusb1_rst_pins>;
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
-		#phy-cells = <0>;
-	};
-};
-
-&davinci_emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet_pins>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	vdds_dsi-supply = <&vdd_io_reg>;
-	vdda_video-supply = <&vdd_io_reg>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <16>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	clock-frequency = <400000>;
-	/* User DIP swithes [1:8] / User LEDS [1:2] */
-	tca6416: gpio@21 {
-		compatible = "ti,tca6416";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		vcc-supply = <&vdd_io_reg>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc_fixed>;
-	bus-width = <4>;
-	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
-	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&usbhshost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
-
-&omap3_pmx_core {
-
-	ethernet_pins: pinmux_ethernet_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
-			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
-			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
-			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
-			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
-			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
-			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
-			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
-			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
-			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
-			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 */
-			OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu1.gpio_31 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */
-			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */
-		>;
-	};
-
-	pwm_pins: pinmux_pwm_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1)       /* mcspi2_cs0.gpt11_pwm */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4)       /* mcspi2_cs1.gpio_182 */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4)       /* mcspi1_cs2.gpio_176 */
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)       /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)       /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)       /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)       /* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)       /* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)       /* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)       /* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)       /* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)       /* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)       /* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)       /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)       /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)       /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)       /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)       /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)       /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)       /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)       /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)       /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)       /* dss_data15.dss_data15 */
-		>;
-	};
-
-	hsusb1_rst_pins: pinmux_hsusb1_rst_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-
-	hsusb1_pins: pinmux_hsusb1_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)	/* etk_clk.hsusb1_stp */
-			OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)	/* etk_ctl.hsusb1_clk */
-			OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)	/* etk_d8.hsusb1_dir */
-			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
-			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
-			OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
-			OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
-			OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
-			OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
-			OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
-			OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
deleted file mode 100644
index f7b680f6c48ad..0000000000000
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ /dev/null
@@ -1,243 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Derald D. Woods <woods.technical@gmail.com>
- *
- * Based on am3517-evm.dts
- */
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd_core_reg>;
-		};
-	};
-
-	wl12xx_buffer: wl12xx_buf {
-		compatible = "regulator-fixed";
-		regulator-name = "wl1271_buf";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_buffer_pins>;
-		gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */
-		regulator-always-on;
-		vin-supply = <&vdd_1v8_reg>;
-	};
-
-	wl12xx_vmmc2: wl12xx_vmmc2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_wkup_pins>;
-		gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		regulator-always-on;
-		vin-supply = <&wl12xx_buffer>;
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		linux,mtd-name = "micron,mt29f4g16abchch";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,device-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-
-	s35390a: s35390a@30 {
-		compatible = "sii,s35390a";
-		reg = <0x30>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&rtc_pins>;
-		interrupts-extended = <&gpio2 23 IRQ_TYPE_EDGE_FALLING>; /* gpio_55 */
-	};
-
-	tps: tps65023@48 {
-		compatible = "ti,tps65023";
-		reg = <0x48>;
-
-		regulators {
-			vdd_core_reg: VDCDC1 {
-				regulator-name = "vdd_core";
-				regulator-always-on;
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			vdd_io_reg: VDCDC2 {
-				regulator-name = "vdd_io";
-				regulator-always-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_1v8_reg: VDCDC3 {
-				regulator-name = "vdd_1v8";
-				regulator-always-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vdd_usb18_reg: LDO1 {
-				regulator-name = "vdd_usb18";
-				regulator-always-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vdd_usb33_reg: LDO2 {
-				regulator-name = "vdd_usb33";
-				regulator-always-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-		};
-	};
-
-	touchscreen: tsc2004@4b {
-		compatible = "ti,tsc2004";
-		reg = <0x4b>;
-
-		vio-supply = <&vdd_io_reg>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsc2004_pins>;
-		interrupts-extended = <&gpio3 1 IRQ_TYPE_EDGE_RISING>; /* gpio_65 */
-
-		touchscreen-fuzz-x = <4>;
-		touchscreen-fuzz-y = <7>;
-		touchscreen-fuzz-pressure = <2>;
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <272>;
-		touchscreen-max-pressure = <2048>;
-
-		ti,x-plate-ohms = <280>;
-		ti,esd-recovery-timeout-ms = <8000>;
-	};
-};
-
-&mmc2 {
-	interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>;
-
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&wl12xx_vmmc2>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
-		ref-clock-frequency = <26000000>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-
-	bluetooth {
-		compatible = "ti,wl1271-st";
-		enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */
-		max-speed = <3000000>;
-	};
-};
-
-&omap3_pmx_core {
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
-		>;
-	};
-
-	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_clk.mmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_cmd.mmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat0.mmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat1.mmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat2.mmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat3.mmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */
-			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4)	/* hdq_sio.gpio_170 */
-		>;
-	};
-
-	rtc_pins: pinmux_rtc_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
-		>;
-	};
-
-	tsc2004_pins: pinmux_tsc2004_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* uart2_rts */
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
-			OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0)		/* gpio_56 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-
-	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
deleted file mode 100644
index 823f63502e9fe..0000000000000
--- a/arch/arm/boot/dts/am3517.dtsi
+++ /dev/null
@@ -1,216 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for am3517 SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "omap3.dtsi"
-
-/* AM3517 doesn't appear to have the crypto engines defined in omap3.dtsi */
-/delete-node/ &aes1_target;
-/delete-node/ &aes2_target;
-
-/ {
-	aliases {
-		serial3 = &uart4;
-		can = &hecc;
-	};
-
-	cpus {
-		cpu: cpu@0 {
-			/* Based on OMAP3630 variants OPP50 and OPP100 */
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			clock-latency = <300000>; /* From legacy driver */
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2-ti-cpu";
-		syscon = <&scm_conf>;
-		/*
-		 * AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx
-		 * appear to operate at 300MHz as well. Since AM3517 only
-		 * lists one operating voltage, it will remain fixed at 1.2V
-		 */
-		opp50-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <1200000>;
-			opp-supported-hw = <0xffffffff 0xffffffff>;
-			opp-suspend;
-		};
-
-		opp100-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1200000>;
-			opp-supported-hw = <0xffffffff 0xffffffff>;
-		};
-	};
-
-	ocp@68000000 {
-		target-module@5c040000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x5c040400 0x4>,
-			      <0x5c040404 0x4>,
-			      <0x5c040408 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&hsotgusb_ick_am35xx>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5c040000 0x1000>;
-
-			am35x_otg_hs: am35x_otg_hs@0 {
-				compatible = "ti,omap3-musb";
-				status = "disabled";
-				reg = <0 0x1000>;
-				interrupts = <71>;
-				interrupt-names = "mc";
-			};
-		};
-
-		davinci_emac: ethernet@5c000000 {
-			compatible = "ti,am3517-emac";
-			ti,hwmods = "davinci_emac";
-			status = "disabled";
-			reg = <0x5c000000 0x30000>;
-			interrupts = <67 68 69 70>;
-			syscon = <&scm_conf>;
-			ti,davinci-ctrl-reg-offset = <0x10000>;
-			ti,davinci-ctrl-mod-reg-offset = <0>;
-			ti,davinci-ctrl-ram-offset = <0x20000>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			ti,davinci-rmii-en = /bits/ 8 <1>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			clocks = <&emac_ick>;
-			clock-names = "ick";
-		};
-
-		davinci_mdio: mdio@5c030000 {
-			compatible = "ti,davinci_mdio";
-			ti,hwmods = "davinci_mdio";
-			status = "disabled";
-			reg = <0x5c030000 0x1000>;
-			bus_freq = <1000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&emac_fck>;
-			clock-names = "fck";
-		};
-
-		uart4: serial@4809e000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			status = "disabled";
-			reg = <0x4809e000 0x400>;
-			interrupts = <84>;
-			dmas = <&sdma 55 &sdma 54>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-
-		omap3_pmx_core2: pinmux@480025d8 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x480025d8 0x24>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pinctrl-cells = <1>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		hecc: can@5c050000 {
-			compatible = "ti,am3517-hecc";
-			status = "disabled";
-			reg = <0x5c050000 0x80>,
-			      <0x5c053000 0x180>,
-			      <0x5c052000 0x200>;
-			reg-names = "hecc", "hecc-ram", "mbx";
-			interrupts = <24>;
-			clocks = <&hecc_ck>;
-		};
-
-		/*
-		 * On am3517 the OCP registers do not seem to be accessible
-		 * similar to the omap34xx. Maybe SGX is permanently set to
-		 * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
-		 * write-only at 0x50000e10. We detect SGX based on the SGX
-		 * revision register instead of the unreadable OCP revision
-		 * register.
-		 */
-		sgx_module: target-module@50000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x50000014 0x4>;
-			reg-names = "rev";
-			clocks = <&sgx_fck>, <&sgx_ick>;
-			clock-names = "fck", "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x50000000 0x4000>;
-
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
-		};
-	};
-};
-
-/* Not currently working, probably needs at least different clocks */
-&rng_target {
-	status = "disabled";
-	/delete-property/ clocks;
-};
-
-/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
-&usb_otg_target {
-	status = "disabled";
-};
-
-&iva {
-	status = "disabled";
-};
-
-&mailbox {
-	status = "disabled";
-};
-
-&mmu_isp {
-	status = "disabled";
-};
-
-#include "am35xx-clocks.dtsi"
-#include "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
-
-/* Preferred always-on timer for clocksource */
-&timer1_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt1_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts
deleted file mode 100644
index e7d7124a34ba2..0000000000000
--- a/arch/arm/boot/dts/am3517_mt_ventoux.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-
-/ {
-	model = "TeeJet Mt.Ventoux";
-	compatible = "teejet,mt_ventoux", "ti,am3517", "ti,omap3";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	/* AM35xx doesn't have IVA */
-	soc {
-		iva {
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
deleted file mode 100644
index 0ee7afaa0e8e2..0000000000000
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP3 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&scm_clocks {
-	emac_ick: emac_ick@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x032c>;
-		ti,bit-shift = <1>;
-	};
-
-	emac_fck: emac_fck@32c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&rmii_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <9>;
-	};
-
-	vpfe_ick: vpfe_ick@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x032c>;
-		ti,bit-shift = <2>;
-	};
-
-	vpfe_fck: vpfe_fck@32c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pclk_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <10>;
-	};
-
-	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x032c>;
-		ti,bit-shift = <0>;
-	};
-
-	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <8>;
-	};
-
-	hecc_ck: hecc_ck@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <3>;
-	};
-};
-&cm_clocks {
-	clock@a10 {
-		compatible = "ti,clksel";
-		reg = <0xa10>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		ipss_ick: clock-ipss-ick {
-			#clock-cells = <0>;
-			compatible = "ti,am35xx-interface-clock";
-			clock-output-names = "ipss_ick";
-			clocks = <&core_l3_ick>;
-			ti,bit-shift = <4>;
-		};
-
-		uart4_ick_am35xx: clock-uart4-ick-am35xx {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "uart4_ick_am35xx";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <23>;
-		};
-	};
-
-	rmii_ck: rmii_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <50000000>;
-	};
-
-	pclk_ck: pclk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	clock@a00 {
-		compatible = "ti,clksel";
-		reg = <0xa00>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		uart4_fck_am35xx: clock-uart4-fck-am35xx {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "uart4_fck_am35xx";
-			clocks = <&core_48m_fck>;
-			ti,bit-shift = <23>;
-		};
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
-			 <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
-			 <&hecc_ck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
-			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
-	};
-};
diff --git a/arch/arm/boot/dts/am3703.dtsi b/arch/arm/boot/dts/am3703.dtsi
deleted file mode 100644
index 2b994ae790c9a..0000000000000
--- a/arch/arm/boot/dts/am3703.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
- */
-
-#include "omap36xx.dtsi"
-
-&iva {
-	status = "disabled";
-};
-
-&sgx_module {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am3715.dtsi b/arch/arm/boot/dts/am3715.dtsi
deleted file mode 100644
index ab328e8c0bd86..0000000000000
--- a/arch/arm/boot/dts/am3715.dtsi
+++ /dev/null
@@ -1,10 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
- */
-
-#include "omap36xx.dtsi"
-
-&iva {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts
deleted file mode 100644
index 791478e81c5ad..0000000000000
--- a/arch/arm/boot/dts/am3874-iceboard.dts
+++ /dev/null
@@ -1,489 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree for Winterland IceBoard
- *
- * https://mcgillcosmology.com
- * https://threespeedlogic.com
- *
- * This is an ARM + FPGA instrumentation board used at telescopes in
- * Antarctica (the South Pole Telescope), Chile (POLARBEAR), and at the DRAO
- * observatory in British Columbia (CHIME).
- *
- * Copyright (c) 2019 Three-Speed Logic, Inc. <gsmecher@threespeedlogic.com>
- */
-
-/dts-v1/;
-
-#include "dm814x.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Winterland IceBoard";
-	compatible = "ti,dm8148", "ti,dm814";
-
-	chosen {
-		stdout-path = "serial1:115200n8";
-		bootargs = "earlycon";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;	/* 1 GB */
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-/* The MAC provides internal delay for the transmit path ONLY, which is enabled
- * provided no -id/-txid/-rxid suffix is provided to "phy-mode".
- *
- * The receive path is delayed at the PHY. The recommended register settings
- * are 0xf0 for the control bits, and 0x7777 for the data bits. However, the
- * conversion code in the kernel lies: the PHY's registers are 120 ps per tap,
- * and the kernel assumes 200 ps per tap. So we have fudged the numbers here to
- * obtain the correct register settings.
- */
-&mac { dual_emac = <1>; };
-&cpsw_emac0 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <1>;
-};
-&cpsw_emac1 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <2>;
-};
-
-&davinci_mdio {
-	ethphy0: ethernet-phy@0 {
-		reg = <0x2>;
-
-		rxc-skew-ps = <3000>;
-		rxdv-skew-ps = <0>;
-
-		rxd3-skew-ps = <0>;
-		rxd2-skew-ps = <0>;
-		rxd1-skew-ps = <0>;
-		rxd0-skew-ps = <0>;
-
-		phy-reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <0x1>;
-
-		rxc-skew-ps = <3000>;
-		rxdv-skew-ps = <0>;
-
-		rxd3-skew-ps = <0>;
-		rxd2-skew-ps = <0>;
-		rxd1-skew-ps = <0>;
-		rxd0-skew-ps = <0>;
-
-		phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&mmc1 { status = "disabled"; };
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-};
-&mmc3 { status = "disabled"; };
-
-&i2c1 {
-	/* Most I2C activity happens through this port, with the sole exception
-	 * of the backplane. Since there are multiply assigned addresses, the
-	 * "i2c-mux-idle-disconnect" is important.
-	 */
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c@0 {
-			/* FMC A */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c@1 {
-			/* FMC B */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c@2 {
-			/* QSFP A */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c@3 {
-			/* QSFP B */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		i2c@4 {
-			/* SFP */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; };
-			ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; };
-			ina230@42 { compatible = "ti,ina230"; reg = <0x42>; shunt-resistor = <5000>; };
-
-			ina230@44 { compatible = "ti,ina230"; reg = <0x44>; shunt-resistor = <5000>; };
-			ina230@45 { compatible = "ti,ina230"; reg = <0x45>; shunt-resistor = <5000>; };
-			ina230@46 { compatible = "ti,ina230"; reg = <0x46>; shunt-resistor = <5000>; };
-
-			ina230@47 { compatible = "ti,ina230"; reg = <0x47>; shunt-resistor = <5500>; };
-			ina230@48 { compatible = "ti,ina230"; reg = <0x48>; shunt-resistor = <2360>; };
-			ina230@49 { compatible = "ti,ina230"; reg = <0x49>; shunt-resistor = <2360>; };
-			ina230@43 { compatible = "ti,ina230"; reg = <0x43>; shunt-resistor = <2360>; };
-			ina230@4b { compatible = "ti,ina230"; reg = <0x4b>; shunt-resistor = <5500>; };
-			ina230@4c { compatible = "ti,ina230"; reg = <0x4c>; shunt-resistor = <2360>; };
-			ina230@4d { compatible = "ti,ina230"; reg = <0x4d>; shunt-resistor = <770>; };
-			ina230@4e { compatible = "ti,ina230"; reg = <0x4e>; shunt-resistor = <770>; };
-			ina230@4f { compatible = "ti,ina230"; reg = <0x4f>; shunt-resistor = <770>; };
-		};
-
-		i2c@6 {
-			/* Backplane */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			u41: pca9575@20 {
-				compatible = "nxp,pca9575";
-				reg = <0x20>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				gpio-line-names =
-					"FMCA_EN_12V0", "FMCA_EN_3V3", "FMCA_EN_VADJ", "FMCA_PG_M2C",
-					"FMCA_PG_C2M", "FMCA_PRSNT_M2C_L", "FMCA_CLK_DIR", "SFP_LOS",
-					"FMCB_EN_12V0", "FMCB_EN_3V3", "FMCB_EN_VADJ", "FMCB_PG_M2C",
-					"FMCB_PG_C2M", "FMCB_PRSNT_M2C_L", "FMCB_CLK_DIR", "SFP_ModPrsL";
-				reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
-			};
-
-			u42: pca9575@21 {
-				compatible = "nxp,pca9575";
-				reg = <0x21>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-line-names =
-					"QSFPA_ModPrsL", "QSFPA_IntL", "QSFPA_ResetL", "QSFPA_ModSelL",
-					"QSFPA_LPMode", "QSFPB_ModPrsL", "QSFPB_IntL", "QSFPB_ResetL",
-					"SFP_TxFault", "SFP_TxDisable", "SFP_RS0", "SFP_RS1",
-					"QSFPB_ModSelL", "QSFPB_LPMode", "SEL_SFP", "ARM_MR";
-				reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
-			};
-
-			u48: pca9575@22 {
-				compatible = "nxp,pca9575";
-				reg = <0x22>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				sw-gpios = <&u48 0 0>, <&u48 1 0>, <&u48 2 0>, <&u48 3 0>,
-					<&u48 4 0>, <&u48 5 0>, <&u48 6 0>, <&u48 7 0>;
-				led-gpios = <&u48 7 0>, <&u48 6 0>, <&u48 5 0>, <&u48 4 0>,
-					<&u48 3 0>, <&u48 2 0>, <&u48 1 0>, <&u48 0 0>;
-
-				gpio-line-names =
-					"GP_SW1", "GP_SW2", "GP_SW3", "GP_SW4",
-					"GP_SW5", "GP_SW6", "GP_SW7", "GP_SW8",
-					"GP_LED8", "GP_LED7", "GP_LED6", "GP_LED5",
-					"GP_LED4", "GP_LED3", "GP_LED2", "GP_LED1";
-				reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
-			};
-
-			u59: pca9575@23 {
-				compatible = "nxp,pca9575";
-				reg = <0x23>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-line-names =
-					"GP_LED9", "GP_LED10", "GP_LED11", "GP_LED12",
-					"GTX1V8PowerFault", "PHYAPowerFault", "PHYBPowerFault", "ArmPowerFault",
-					"BP_SLOW_GPIO0", "BP_SLOW_GPIO1", "BP_SLOW_GPIO2", "BP_SLOW_GPIO3",
-					"BP_SLOW_GPIO4", "BP_SLOW_GPIO5", "__unused_u59_p16", "__unused_u59_p17";
-				reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
-			};
-
-			tmp100@48 { compatible = "ti,tmp100"; reg = <0x48>; };
-			tmp100@4a { compatible = "ti,tmp100"; reg = <0x4a>; };
-			tmp100@4b { compatible = "ti,tmp100"; reg = <0x4b>; };
-			tmp100@4c { compatible = "ti,tmp100"; reg = <0x4c>; };
-
-			/* EEPROM bank and serial number are treated as separate devices */
-			at24c01@57 { compatible = "atmel,24c01"; reg = <0x57>; };
-			at24cs01@5f { compatible = "atmel,24cs01"; reg = <0x5f>; };
-		};
-	};
-};
-
-&i2c2 {
-	i2c-mux@71 {
-		compatible = "nxp,pca9548";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@6 {
-			/* Backplane */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-			multi-master;
-
-			/* All backplanes should have this -- it's how we know they're there. */
-			at24c08@54 { compatible="atmel,24c08"; reg=<0x54>; };
-			at24cs08@5c { compatible="atmel,24cs08"; reg=<0x5c>; };
-
-			/* 16 slot backplane */
-			tmp421@4d { compatible="ti,tmp421"; reg=<0x4d>; };
-			tmp421@4e { compatible="ti,tmp421"; reg=<0x4e>; };
-			ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <2360>; };
-			amc6821@18 { compatible = "ti,amc6821"; reg = <0x18>; };
-
-			/* Single slot backplane */
-		};
-	};
-};
-
-&pincntl {
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
-			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1)	/* SD1_CMD */
-			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[0] */
-			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[1] */
-			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[2] */
-			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[3] */
-			DM814X_IOPAD(0x0924, PIN_INPUT_PULLUP | 0x40)	/* SD1_POW */
-			DM814X_IOPAD(0x0928, PIN_INPUT | 0x40)	/* SD1_SDWP */
-			DM814X_IOPAD(0x093C, PIN_INPUT | 0x2)	/* SD1_SDCD */
-			>;
-	};
-
-	usb0_pins: pinmux_usb0_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
-			>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
-			>;
-	};
-
-	gpio1_pins: pinmux_gpio1_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x081c, PIN_OUTPUT | 0x80)	/* PROGRAM_B */
-			DM814X_IOPAD(0x0820, PIN_INPUT | 0x80)	/* INIT_B */
-			DM814X_IOPAD(0x0824, PIN_INPUT | 0x80)	/* DONE */
-
-			DM814X_IOPAD(0x0838, PIN_INPUT_PULLUP | 0x80) /* FMCA_TMS */
-			DM814X_IOPAD(0x083c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TCK */
-			DM814X_IOPAD(0x0898, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDO */
-			DM814X_IOPAD(0x089c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDI */
-			DM814X_IOPAD(0x08ac, PIN_INPUT_PULLUP | 0x80) /* FMCA_TRST */
-
-			DM814X_IOPAD(0x08b0, PIN_INPUT_PULLUP | 0x80) /* FMCB_TMS */
-			DM814X_IOPAD(0x0a88, PIN_INPUT_PULLUP | 0x80) /* FMCB_TCK */
-			DM814X_IOPAD(0x0a8c, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDO */
-			DM814X_IOPAD(0x08bc, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDI */
-			DM814X_IOPAD(0x0a94, PIN_INPUT_PULLUP | 0x80) /* FMCB_TRST */
-
-			DM814X_IOPAD(0x08d4, PIN_INPUT_PULLUP | 0x80) /* FPGA_TMS */
-			DM814X_IOPAD(0x0aa8, PIN_INPUT_PULLUP | 0x80) /* FPGA_TCK */
-			DM814X_IOPAD(0x0adc, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDO */
-			DM814X_IOPAD(0x0ab0, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDI */
-			>;
-	};
-
-	gpio2_pins: pinmux_gpio2_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x090c, PIN_INPUT_PULLUP | 0x80) /* PHY A IRQ */
-			DM814X_IOPAD(0x0910, PIN_INPUT_PULLUP | 0x80) /* PHY A RESET */
-			DM814X_IOPAD(0x08f4, PIN_INPUT_PULLUP | 0x80) /* PHY B IRQ */
-			DM814X_IOPAD(0x08f8, PIN_INPUT_PULLUP | 0x80) /* PHY B RESET */
-
-			//DM814X_IOPAD(0x0a14, PIN_INPUT_PULLUP | 0x80) /* ARM IRQ */
-			//DM814X_IOPAD(0x0900, PIN_INPUT | 0x80) /* GPIO IRQ */
-			DM814X_IOPAD(0x0a2c, PIN_INPUT_PULLUP | 0x80) /* GPIO RESET */
-		>;
-	};
-
-	gpio4_pins: pinmux_gpio4_pins {
-		pinctrl-single,pins = <
-			/* The PLL doesn't react well to the SPI controller reset, so
-			 * we force the CS lines to pull up as GPIOs until we're ready.
-			 * See https://e2e.ti.com/support/processors/f/791/t/276011?Linux-support-for-AM3874-DM8148-in-Arago-linux-omap3
-			 */
-			DM814X_IOPAD(0x0b3c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO0 */
-			DM814X_IOPAD(0x0b40, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO1 */
-			DM814X_IOPAD(0x0b44, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO2 */
-			DM814X_IOPAD(0x0b48, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO3 */
-			DM814X_IOPAD(0x0b4c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO4 */
-			DM814X_IOPAD(0x0b50, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO5 */
-		>;
-	};
-
-	spi2_pins: pinmux_spi2_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0950, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS1 as GPIO */
-			DM814X_IOPAD(0x0818, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS2 as GPIO */
-		>;
-	};
-
-	spi4_pins: pinmux_spi4_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0a7c, 0x20)
-			DM814X_IOPAD(0x0b74, 0x20)
-			DM814X_IOPAD(0x0b78, PIN_OUTPUT | 0x20)
-			DM814X_IOPAD(0x0b7c, PIN_OUTPUT_PULLDOWN | 0x20)
-			DM814X_IOPAD(0x0b80, PIN_INPUT | 0x20)
-		>;
-	};
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio1_pins>;
-	gpio-line-names =
-		"", "PROGRAM_B", "INIT_B", "DONE",			/* 0-3 */
-		"", "", "", "",						/* 4-7 */
-		"FMCA_TMS", "FMCA_TCK", "FMCA_TDO", "FMCA_TDI",		/* 8-11 */
-		"", "", "", "FMCA_TRST",				/* 12-15 */
-		"FMCB_TMS", "FMCB_TCK", "FMCB_TDO", "FMCB_TDI",		/* 16-19 */
-		"FMCB_TRST", "", "", "",				/* 20-23 */
-		"FPGA_TMS", "FPGA_TCK", "FPGA_TDO", "FPGA_TDI",		/* 24-27 */
-		"", "", "", "";						/* 28-31 */
-};
-
-&gpio2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio2_pins>;
-	gpio-line-names =
-		"PHYA_IRQ_N", "PHYA_RESET_N", "", "",			/* 0-3 */
-		"", "", "", "PHYB_IRQ_N",				/* 4-7 */
-		"PHYB_RESET_N", "ARM_IRQ", "GPIO_IRQ", "";		/* 8-11 */
-};
-
-&gpio3 {
-	pinctrl-names = "default";
-	/*pinctrl-0 = <&gpio3_pins>;*/
-	gpio-line-names =
-		"", "", "ARMClkSel0", "",				/* 0-3 */
-		"EnFPGARef", "", "", "ARMClkSel1";			/* 4-7 */
-};
-
-&gpio4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio4_pins>;
-	gpio-line-names =
-		"BP_ARM_GPIO0", "BP_ARM_GPIO1", "BP_ARM_GPIO2", "BP_ARM_GPIO3",
-		"BP_ARM_GPIO4", "BP_ARM_GPIO5";
-};
-
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins>;
-	dr_mode = "host";
-};
-
-&usb1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-	dr_mode = "host";
-};
-
-&mcspi1 {
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-
-		fsbl@0 {
-			/* 256 kB */
-			label = "U-Boot-min";
-			reg = <0 0x40000>;
-		};
-		ssbl@1 {
-			/* 512 kB */
-			label = "U-Boot";
-			reg = <0x40000 0x80000>;
-		};
-		bootenv@2 {
-			/* 256 kB */
-			label = "U-Boot Env";
-			reg = <0xc0000 0x40000>;
-		};
-		kernel@3 {
-			/* 4 MB */
-			label = "Kernel";
-			reg = <0x100000 0x400000>;
-		};
-		ipmi@4 {
-			label = "IPMI FRU";
-			reg = <0x500000 0x40000>;
-		};
-		fs@5 {
-			label = "File System";
-			reg = <0x540000 0x1ac0000>;
-		};
-	};
-};
-
-&mcspi3 {
-	/* DMA event numbers stolen from MCASP */
-	dmas = <&edma_xbar 8 0 16 &edma_xbar 9 0 17
-		&edma_xbar 10 0 18 &edma_xbar 11 0 19>;
-	dma-names = "tx0", "rx0", "tx1", "rx1";
-};
-
-&mcspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi4_pins>;
-
-	/* DMA event numbers stolen from MCASP, MCBSP */
-	dmas = <&edma_xbar 12 0 20 &edma_xbar 13 0 21>;
-	dma-names = "tx0", "rx0";
-};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
deleted file mode 100644
index 8613355bbd5ec..0000000000000
--- a/arch/arm/boot/dts/am4372.dtsi
+++ /dev/null
@@ -1,801 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for AM4372 SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/am4.h>
-
-/ {
-	compatible = "ti,am4372", "ti,am43";
-	interrupt-parent = <&wakeupgen>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0>;
-	};
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		ethernet0 = &cpsw_port1;
-		ethernet1 = &cpsw_port2;
-		spi0 = &qspi;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu: cpu@0 {
-			compatible = "arm,cortex-a9";
-			enable-method = "ti,am4372";
-			device_type = "cpu";
-			reg = <0>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-			cpu-idle-states = <&mpu_gate>;
-		};
-
-		idle-states {
-			mpu_gate: mpu_gate {
-				compatible = "arm,idle-state";
-				entry-latency-us = <40>;
-				exit-latency-us = <100>;
-				min-residency-us = <300>;
-				local-timer-stop;
-			};
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2-ti-cpu";
-		syscon = <&scm_conf>;
-
-		opp50-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <950000 931000 969000>;
-			opp-supported-hw = <0xFF 0x01>;
-			opp-suspend;
-		};
-
-		opp100-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0xFF 0x04>;
-		};
-
-		opp120-720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1200000 1176000 1224000>;
-			opp-supported-hw = <0xFF 0x08>;
-		};
-
-		oppturbo-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1260000 1234800 1285200>;
-			opp-supported-hw = <0xFF 0x10>;
-		};
-
-		oppnitro-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1325000 1298500 1351500>;
-			opp-supported-hw = <0xFF 0x20>;
-		};
-	};
-
-	soc {
-		compatible = "ti,omap-infra";
-	};
-
-	gic: interrupt-controller@48241000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48241000 0x1000>,
-		      <0x48240100 0x0100>;
-		interrupt-parent = <&gic>;
-	};
-
-	wakeupgen: interrupt-controller@48281000 {
-		compatible = "ti,omap4-wugen-mpu";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48281000 0x1000>;
-		interrupt-parent = <&gic>;
-	};
-
-	scu: scu@48240000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x48240000 0x100>;
-	};
-
-	global_timer: timer@48240200 {
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0x48240200 0x100>;
-		interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-		interrupt-parent = <&gic>;
-		clocks = <&mpu_periphclk>;
-	};
-
-	local_timer: timer@48240600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x48240600 0x100>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
-		interrupt-parent = <&gic>;
-		clocks = <&mpu_periphclk>;
-	};
-
-	cache-controller@48242000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x48242000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	ocp@44000000 {
-		compatible = "simple-pm-bus";
-		power-domains = <&prm_per>;
-		clocks = <&l3_clkctrl AM4_L3_L3_MAIN_CLKCTRL 0>;
-		clock-names = "fck";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,no-idle;
-
-		l3-noc@44000000 {
-			compatible = "ti,am4372-l3-noc";
-			reg = <0x44000000 0x400000>,
-			      <0x44800000 0x400000>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		l4_wkup: interconnect@44c00000 {
-		};
-		l4_per: interconnect@48000000 {
-		};
-		l4_fast: interconnect@4a000000 {
-		};
-
-		target-module@4c000000 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x4c000000 0x4>;
-			reg-names = "rev";
-			clocks = <&emif_clkctrl AM4_EMIF_EMIF_CLKCTRL 0>;
-			clock-names = "fck";
-			ti,no-idle;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4c000000 0x1000000>;
-
-			emif: emif@0 {
-				compatible = "ti,emif-am4372";
-				reg = <0 0x1000000>;
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				sram = <&pm_sram_code
-					&pm_sram_data>;
-			};
-		};
-
-		target-module@49000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49000000 0x4>;
-			reg-names = "rev";
-			clocks = <&l3_clkctrl AM4_L3_TPCC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49000000 0x10000>;
-
-			edma: dma@0 {
-				compatible = "ti,edma3-tpcc";
-				reg = <0 0x10000>;
-				reg-names = "edma3_cc";
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "edma3_ccint", "edma3_mperr",
-						  "edma3_ccerrint";
-				dma-requests = <64>;
-				#dma-cells = <2>;
-
-				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-					   <&edma_tptc2 0>;
-
-				ti,edma-memcpy-channels = <58 59>;
-			};
-		};
-
-		target-module@49800000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49800000 0x4>,
-			      <0x49800010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&l3_clkctrl AM4_L3_TPTC0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49800000 0x100000>;
-
-			edma_tptc0: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@49900000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49900000 0x4>,
-			      <0x49900010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&l3_clkctrl AM4_L3_TPTC1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49900000 0x100000>;
-
-			edma_tptc1: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@49a00000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49a00000 0x4>,
-			      <0x49a00010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&l3_clkctrl AM4_L3_TPTC2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49a00000 0x100000>;
-
-			edma_tptc2: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@47810000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x478102fc 0x4>,
-			      <0x47810110 0x4>,
-			      <0x47810114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x47810000 0x1000>;
-
-			mmc3: mmc@0 {
-				compatible = "ti,am437-sdhci";
-				ti,needs-special-reset;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		sham_target: target-module@53100000 {
-			compatible = "ti,sysc-omap3-sham", "ti,sysc";
-			reg = <0x53100100 0x4>,
-			      <0x53100110 0x4>,
-			      <0x53100114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l3_clkdm */
-			clocks = <&l3_clkctrl AM4_L3_SHAM_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x53100000 0x1000>;
-
-			sham: sham@0 {
-				compatible = "ti,omap5-sham";
-				reg = <0 0x300>;
-				dmas = <&edma 36 0>;
-				dma-names = "rx";
-				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		aes_target: target-module@53501000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x53501080 0x4>,
-			      <0x53501084 0x4>,
-			      <0x53501088 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l3_clkdm */
-			clocks = <&l3_clkctrl AM4_L3_AES_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x53501000 0x1000>;
-
-			aes: aes@0 {
-				compatible = "ti,omap4-aes";
-				reg = <0 0xa0>;
-				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&edma 6 0>,
-				      <&edma 5 0>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		des_target: target-module@53701000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x53701030 0x4>,
-			      <0x53701034 0x4>,
-			      <0x53701038 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l3_clkdm */
-			clocks = <&l3_clkctrl AM4_L3_DES_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x53701000 0x1000>;
-
-			des: des@0 {
-				compatible = "ti,omap4-des";
-				reg = <0 0xa0>;
-				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&edma 34 0>,
-				       <&edma 33 0>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		pruss_tm: target-module@54400000 {
-			compatible = "ti,sysc-pruss", "ti,sysc";
-			reg = <0x54426000 0x4>,
-			      <0x54426004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
-					 SYSC_PRUSS_SUB_MWAIT)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&pruss_ocp_clkctrl AM4_PRUSS_OCP_PRUSS_CLKCTRL 0>;
-			clock-names = "fck";
-			resets = <&prm_per 1>;
-			reset-names = "rstctrl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x54400000 0x80000>;
-
-			pruss1: pruss@0 {
-				compatible = "ti,am4376-pruss1";
-				reg = <0x0 0x40000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges;
-
-				pruss1_mem: memories@0 {
-					reg = <0x0 0x2000>,
-					      <0x2000 0x2000>,
-					      <0x10000 0x8000>;
-					reg-names = "dram0", "dram1",
-						    "shrdram2";
-				};
-
-				pruss1_cfg: cfg@26000 {
-					compatible = "ti,pruss-cfg", "syscon";
-					reg = <0x26000 0x2000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x26000 0x2000>;
-
-					clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						pruss1_iepclk_mux: iepclk-mux@30 {
-							reg = <0x30>;
-							#clock-cells = <0>;
-							clocks = <&sysclk_div>,     /* icss_iep_gclk */
-								 <&pruss_ocp_gclk>; /* icss_ocp_gclk */
-						};
-					};
-				};
-
-				pruss1_mii_rt: mii-rt@32000 {
-					compatible = "ti,pruss-mii", "syscon";
-					reg = <0x32000 0x58>;
-				};
-
-				pruss1_intc: interrupt-controller@20000 {
-					compatible = "ti,pruss-intc";
-					reg = <0x20000 0x2000>;
-					interrupt-controller;
-					#interrupt-cells = <3>;
-					interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "host_intr0", "host_intr1",
-							  "host_intr2", "host_intr3",
-							  "host_intr4",
-							  "host_intr6", "host_intr7";
-					ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
-				};
-
-				pru1_0: pru@34000 {
-					compatible = "ti,am4376-pru";
-					reg = <0x34000 0x3000>,
-					      <0x22000 0x400>,
-					      <0x22400 0x100>;
-					reg-names = "iram", "control", "debug";
-					firmware-name = "am437x-pru1_0-fw";
-				};
-
-				pru1_1: pru@38000 {
-					compatible = "ti,am4376-pru";
-					reg = <0x38000 0x3000>,
-					      <0x24000 0x400>,
-					      <0x24400 0x100>;
-					reg-names = "iram", "control", "debug";
-					firmware-name = "am437x-pru1_1-fw";
-				};
-
-				pruss1_mdio: mdio@32400 {
-					compatible = "ti,davinci_mdio";
-					reg = <0x32400 0x90>;
-					clocks = <&dpll_core_m4_ck>;
-					clock-names = "fck";
-					bus_freq = <1000000>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-			};
-
-			pruss0: pruss@40000 {
-				compatible = "ti,am4376-pruss0";
-				reg = <0x40000 0x40000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges;
-
-				pruss0_mem: memories@40000 {
-					reg = <0x40000 0x1000>,
-					      <0x42000 0x1000>;
-					reg-names = "dram0", "dram1";
-				};
-
-				pruss0_cfg: cfg@66000 {
-					compatible = "ti,pruss-cfg", "syscon";
-					reg = <0x66000 0x2000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x66000 0x2000>;
-
-					clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						pruss0_iepclk_mux: iepclk-mux@30 {
-							reg = <0x30>;
-							#clock-cells = <0>;
-							clocks = <&sysclk_div>,     /* icss_iep_gclk */
-								 <&pruss_ocp_gclk>; /* icss_ocp_gclk */
-						};
-					};
-				};
-
-				pruss0_mii_rt: mii-rt@72000 {
-					compatible = "ti,pruss-mii", "syscon";
-					reg = <0x72000 0x58>;
-					status = "disabled";
-				};
-
-				pruss0_intc: interrupt-controller@60000 {
-					compatible = "ti,pruss-intc";
-					reg = <0x60000 0x2000>;
-					interrupt-controller;
-					#interrupt-cells = <3>;
-					interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "host_intr0", "host_intr1",
-							  "host_intr2", "host_intr3",
-							  "host_intr4",
-							  "host_intr6", "host_intr7";
-					ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
-				};
-
-				pru0_0: pru@74000 {
-					compatible = "ti,am4376-pru";
-					reg = <0x74000 0x1000>,
-					      <0x62000 0x400>,
-					      <0x62400 0x100>;
-					reg-names = "iram", "control", "debug";
-					firmware-name = "am437x-pru0_0-fw";
-				};
-
-				pru0_1: pru@78000 {
-					compatible = "ti,am4376-pru";
-					reg = <0x78000 0x1000>,
-					      <0x64000 0x400>,
-					      <0x64400 0x100>;
-					reg-names = "iram", "control", "debug";
-					firmware-name = "am437x-pru0_1-fw";
-				};
-			};
-		};
-
-		target-module@50000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x50000000 4>,
-			      <0x50000010 4>,
-			      <0x50000014 4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&l3s_clkctrl AM4_L3S_GPMC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
-				 <0x00000000 0x00000000 0x40000000>; /* data */
-
-			gpmc: gpmc@50000000 {
-				compatible = "ti,am3352-gpmc";
-				dmas = <&edma 52 0>;
-				dma-names = "rxtx";
-				clocks = <&l3s_gclk>;
-				clock-names = "fck";
-				reg = <0x50000000 0x2000>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-				gpmc,num-cs = <7>;
-				gpmc,num-waitpins = <2>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				status = "disabled";
-			};
-		};
-
-		target-module@47900000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x47900000 0x4>,
-			      <0x47900010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&l3s_clkctrl AM4_L3S_QSPI_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x47900000 0x1000>,
-				 <0x30000000 0x30000000 0x4000000>;
-
-			qspi: spi@0 {
-				compatible = "ti,am4372-qspi";
-				reg = <0 0x100>,
-				      <0x30000000 0x4000000>;
-				reg-names = "qspi_base", "qspi_mmap";
-				clocks = <&dpll_per_m2_div4_ck>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <0 138 0x4>;
-				num-cs = <4>;
-			};
-		};
-
-		target-module@40300000 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			clocks = <&l3_clkctrl AM4_L3_OCMCRAM_CLKCTRL 0>;
-			clock-names = "fck";
-			ti,no-idle;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x40300000 0x40000>;
-
-			ocmcram: sram@0 {
-				compatible = "mmio-sram";
-				reg = <0 0x40000>; /* 256k */
-				ranges = <0 0 0x40000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				pm_sram_code: pm-code-sram@0 {
-					compatible = "ti,sram";
-					reg = <0x0 0x1000>;
-					protect-exec;
-				};
-
-				pm_sram_data: pm-data-sram@1000 {
-					compatible = "ti,sram";
-					reg = <0x1000 0x1000>;
-					pool;
-				};
-			};
-		};
-
-		target-module@56000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x5600fe00 0x4>,
-			      <0x5600fe10 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
-			clock-names = "fck";
-			power-domains = <&prm_gfx>;
-			resets = <&prm_gfx 0>;
-			reset-names = "rstctrl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x56000000 0x1000000>;
-		};
-	};
-};
-
-#include "am437x-l4.dtsi"
-#include "am43xx-clocks.dtsi"
-
-&prcm {
-	prm_mpu: prm@300 {
-		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x300 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_gfx: prm@400 {
-		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x400 0x100>;
-		#power-domain-cells = <0>;
-		#reset-cells = <1>;
-	};
-
-	prm_rtc: prm@500 {
-		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x500 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_tamper: prm@600 {
-		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x600 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_cefuse: prm@700 {
-		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x700 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_per: prm@800 {
-		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x800 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_wkup: prm@2000 {
-		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x2000 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_device: prm@4000 {
-		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x4000 0x100>;
-		#reset-cells = <1>;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer1_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_TIMER1_CLKCTRL 0>,
-		 <&l4_wkup_clkctrl AM4_L4_WKUP_L4_WKUP_CLKCTRL 0>;
-	clock-names = "fck", "ick";
-	timer@0 {
-		assigned-clocks = <&timer1_fck>;
-		assigned-clock-parents = <&sys_clkin_ck>;
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	clocks = <&l4ls_clkctrl AM4_L4LS_TIMER2_CLKCTRL 0>,
-		 <&l4ls_clkctrl AM4_L4LS_L4_LS_CLKCTRL 0>;
-	clock-names = "fck", "ick";
-	timer@0 {
-		assigned-clocks = <&timer2_fck>;
-		assigned-clock-parents = <&sys_clkin_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
deleted file mode 100644
index 0861e868b75ab..0000000000000
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ /dev/null
@@ -1,422 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
- */
-
-/dts-v1/;
-
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "am4372.dtsi"
-
-/ {
-	model = "CompuLab CM-T43";
-	compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
-
-	leds {
-		compatible = "gpio-leds";
-
-		ledb {
-			label = "cm-t43:green";
-			gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	vmmc_3v3: fixedregulator-v3_3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		enable-active-high;
-	};
-};
-
-&am43xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cm_t43_led_pins>;
-
-	cm_t43_led_pins: cm_t43_led_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0xa78, MUX_MODE7)
-		>;
-	};
-
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	emmc_pins: emmc_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0 */
-			AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1 */
-			AM4372_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2 */
-			AM4372_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3 */
-			AM4372_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad12.mmc1_dat4 */
-			AM4372_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad13.mmc1_dat5 */
-			AM4372_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad14.mmc1_dat6 */
-			AM4372_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad15.mmc1_dat7 */
-			AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-		>;
-	};
-
-	spi0_pins: pinmux_spi0_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_sclk.spi0_sclk */
-			AM4372_IOPAD(0x954, PIN_INPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
-			AM4372_IOPAD(0x958, PIN_OUTPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
-			AM4372_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
-		>;
-	};
-
-	nand_flash_x8: nand_flash_x8 {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x800, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
-			AM4372_IOPAD(0x804, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
-			AM4372_IOPAD(0x808, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
-			AM4372_IOPAD(0x80c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
-			AM4372_IOPAD(0x810, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
-			AM4372_IOPAD(0x814, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
-			AM4372_IOPAD(0x818, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
-			AM4372_IOPAD(0x81c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
-			AM4372_IOPAD(0x870, PIN_INPUT_PULLUP  | MUX_MODE0)
-			AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x898, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-			AM4372_IOPAD(0x894, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-			AM4372_IOPAD(0x890, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-			AM4372_IOPAD(0x89c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
-			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
-			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
-			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
-			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
-			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
-			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
-			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
-			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
-			AM4372_IOPAD(0xa74, MUX_MODE3)
-			/* Slave 2 */
-			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.txen */
-			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a1.rxctl */
-			AM4372_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.txd3 */
-			AM4372_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.txd2 */
-			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.txd1 */
-			AM4372_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.txd0 */
-			AM4372_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.tclk */
-			AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a7.rclk */
-			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a8.rxd3 */
-			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a9.rxd2 */
-			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a10.rxd1 */
-			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a11.rxd0 */
-			AM4372_IOPAD(0xa38, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0x08000000 0x1000000>;
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>;		/* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		/* MTD partition table */
-		partition@0 {
-			label = "kernel";
-			reg = <0x0 0x00980000>;
-		};
-		partition@980000 {
-			label = "dtb";
-			reg = <0x00980000 0x00080000>;
-		};
-		partition@a00000 {
-			label = "rootfs";
-			reg = <0x00a00000 0x0>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <100000>;
-
-	tps65218: tps65218@24 {
-		compatible = "ti,tps65218";
-		reg = <0x24>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
-		interrupt-parent = <&gic>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			regulator-name = "vdcdc3";
-			regulator-suspend-enable;
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc5: regulator-dcdc5 {
-			regulator-name = "v1_0bat";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc6: regulator-dcdc6 {
-			regulator-name = "v1_8bat";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1: regulator-ldo1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-
-	eeprom_module: at24@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&gpio4 {
-	status = "okay";
-};
-
-&gpio5 {
-	status = "okay";
-};
-
-&mmc2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	vmmc-supply = <&vmmc_3v3>;
-	bus-width = <8>;
-	non-removable;
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	dmas = <&edma 16 0
-		&edma 17 0>;
-	dma-names = "tx0", "rx0";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		partition@0 {
-			label = "uboot";
-			reg = <0x0 0xc0000>;
-		};
-
-		partition@c0000 {
-			label = "uboot environment";
-			reg = <0xc0000 0x40000>;
-		};
-
-		partition@100000 {
-			label = "reserved";
-			reg = <0x100000 0x100000>;
-		};
-	};
-};
-
-&mac_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cpsw_default>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default";
-	pinctrl-0 = <&davinci_mdio_default>;
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-txid";
-	ti,dual-emac-pvid = <2>;
-};
-
-&dwc3_1 {
-	status = "okay";
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&dwc3_2 {
-	status = "okay";
-};
-
-&usb2_phy2 {
-	status = "okay";
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-	interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "peripheral", "host", "otg";
-};
-
-&elm {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-&cpu {
-	cpu0-supply = <&dcdc2>;
-	operating-points = <1000000 1330000>,
-			   <800000 1260000>,
-			   <720000 1200000>,
-			   <600000 1100000>,
-			   <300000 950000>;
-};
-
-&pruss1_mdio {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
deleted file mode 100644
index 46d5361fe8764..0000000000000
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ /dev/null
@@ -1,1137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/* AM437x GP EVM */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "TI AM437x GP EVM";
-	compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	evm_v3_3d: fixedregulator-v3_3d {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_v3_3d";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	vmmcwl_fixed: fixedregulator-mmcwl {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcwl_fixed";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	lcd_bl: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	matrix_keypad: matrix_keypad0 {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&matrix_keypad_default>;
-		pinctrl-1 = <&matrix_keypad_sleep>;
-
-		wakeup-source;
-
-		row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */
-				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
-				&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
-
-		col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
-				&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
-
-		linux,keymap = <0x00000201      /* P1 */
-				0x00010202      /* P2 */
-				0x01000067      /* UP */
-				0x0101006a      /* RIGHT */
-				0x02000069      /* LEFT */
-				0x0201006c>;      /* DOWN */
-		};
-
-	lcd0: display {
-		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
-		label = "lcd";
-
-		backlight = <&lcd_bl>;
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	/* fixed 12MHz oscillator */
-	refclk: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	/* fixed 32k external oscillator clock */
-	clk_32k_rtc: clk_32k_rtc {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	sound0: sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "AM437x-GP-EVM";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Headphone Jack",	"HPLOUT",
-			"Headphone Jack",	"HPROUT",
-			"LINE1L",		"Line In",
-			"LINE1R",		"Line In";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound0_master>;
-		simple-audio-card,frame-master = <&sound0_master>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp1>;
-			system-clock-frequency = <12000000>;
-		};
-
-		sound0_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			system-clock-frequency = <12000000>;
-		};
-	};
-
-	beeper: beeper {
-		compatible = "gpio-beeper";
-		pinctrl-names = "default";
-		pinctrl-0 = <&beeper_pins_default>;
-		pinctrl-1 = <&beeper_pins_sleep>;
-		gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&am43xx_pinmux {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>;
-	pinctrl-1 = <&wlan_pins_sleep>;
-
-	ddr3_vtt_toggle_default: ddr_vtt_toggle_default {
-		pinctrl-single,pins = <
-			0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) /* spi0_cs0.gpio5_7 */
-		>;
-	};
-
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: i2c1_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x964, MUX_MODE0)       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-		>;
-	};
-
-	pixcir_ts_pins: pixcir_ts_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
-			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
-			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
-			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
-			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
-			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
-			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
-			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
-			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	nand_flash_x8: nand_flash_x8 {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x800, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			AM4372_IOPAD(0x804, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			AM4372_IOPAD(0x808, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			AM4372_IOPAD(0x80c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			AM4372_IOPAD(0x810, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			AM4372_IOPAD(0x814, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			AM4372_IOPAD(0x818, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			AM4372_IOPAD(0x81c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	dss_pins: dss_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-			AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
-			AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
-			AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
-			AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
-			AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
-			AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
-			AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-			AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-			AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-			AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-			AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-			AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-			AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
-
-		>;
-	};
-
-	display_mux_pins: display_mux_pins {
-		pinctrl-single,pins = <
-			/* GPIO 5_8 to select LCD / HDMI */
-			AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-
-	dcan0_default: dcan0_default_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
-			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
-		>;
-	};
-
-	dcan0_sleep: dcan0_sleep_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_ctsn.gpio0_12 */
-			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rtsn.gpio0_13 */
-		>;
-	};
-
-	dcan1_default: dcan1_default_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
-			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
-		>;
-	};
-
-	dcan1_sleep: dcan1_sleep_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rxd.gpio0_14 */
-			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_txd.gpio0_15 */
-		>;
-	};
-
-	vpfe0_pins_default: vpfe0_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
-			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
-			AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
-			AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
-			AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
-			AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
-			AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
-			AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
-			AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
-			AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
-			AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
-			AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
-			AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
-		>;
-	};
-
-	vpfe0_pins_sleep: vpfe0_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
-			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
-			AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
-			AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
-			AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
-			AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
-			AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
-			AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
-			AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
-			AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
-			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
-			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
-			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
-		>;
-	};
-
-	vpfe1_pins_default: vpfe1_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
-			AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
-			AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
-			AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
-			AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
-			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
-			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
-			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
-			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
-			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
-			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
-			AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
-			AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
-		>;
-	};
-
-	vpfe1_pins_sleep: vpfe1_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
-			AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
-			AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
-			AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
-			AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
-			AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
-			AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
-			AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
-			AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
-			AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
-			AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
-			AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
-			AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
-		>;
-	};
-
-	mmc3_pins_default: pinmux_mmc3_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
-			AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
-			AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
-			AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
-			AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
-			AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
-		>;
-	};
-
-	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
-			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
-			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
-			AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
-			AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
-			AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
-		>;
-	};
-
-	wlan_pins_default: pinmux_wlan_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
-			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
-			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
-		>;
-	};
-
-	wlan_pins_sleep: pinmux_wlan_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
-			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
-			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
-		>;
-	};
-
-	uart3_pins: uart3_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
-			AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
-			AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
-			AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
-		>;
-	};
-
-	mcasp1_pins: mcasp1_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
-			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
-			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
-			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-
-	mcasp1_sleep_pins: mcasp1_sleep_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	gpio0_pins: gpio0_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
-		>;
-	};
-
-	emmc_pins_default: emmc_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
-			AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-		>;
-	};
-
-	emmc_pins_sleep: emmc_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
-			AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
-			AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
-			AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
-			AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
-			AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
-			AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
-			AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
-			AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
-			AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
-		>;
-	};
-
-	beeper_pins_default: beeper_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* cam1_field.gpio4_12 */
-		>;
-	};
-
-	beeper_pins_sleep: beeper_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9e0, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* cam1_field.gpio4_12 */
-		>;
-	};
-
-	unused_pins: unused_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xa3c, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
-			AM4372_IOPAD(0xa40, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xa44, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xa48, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xa4c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xa50, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xa54, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
-			AM4372_IOPAD(0xa58, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xa60, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
-			AM4372_IOPAD(0xa68, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xa70, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xa78, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xa7c, PIN_INPUT | PULL_DISABLE)
-			AM4372_IOPAD(0xac8, PIN_INPUT_PULLDOWN)
-			AM4372_IOPAD(0xad4, PIN_INPUT_PULLDOWN)
-			AM4372_IOPAD(0xad8, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xadc, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xae0, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xae4, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xae8, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xaec, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xaf0, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xaf4, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xaf8, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xafc, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xb00, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xb04, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xb08, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xb0c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xb10, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xb14, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0xb18, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	debugss_pins: pinmux_debugss_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0xa90, PIN_INPUT_PULLDOWN)
-			AM4372_IOPAD(0xa94, PIN_INPUT_PULLDOWN)
-			AM4372_IOPAD(0xa98, PIN_INPUT_PULLDOWN)
-			AM4372_IOPAD(0xa9c, PIN_INPUT_PULLDOWN)
-			AM4372_IOPAD(0xaa0, PIN_INPUT_PULLDOWN)
-			AM4372_IOPAD(0xaa4, PIN_INPUT_PULLDOWN)
-			AM4372_IOPAD(0xaa8, PIN_INPUT_PULLDOWN)
-		>;
-	};
-
-	uart0_pins_default: uart0_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
-			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
-			AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
-			AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
-		>;
-	};
-
-	uart0_pins_sleep: uart0_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_ctsn.uart0_ctsn */
-			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_rtsn.uart0_rtsn */
-			AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
-			AM4372_IOPAD(0x974, PIN_INPUT_PULLDOWN | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
-		>;
-	};
-
-	matrix_keypad_default: matrix_keypad_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7)
-			AM4372_IOPAD(0x9a8, PIN_OUTPUT | MUX_MODE7)
-			AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9)
-			AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)
-		>;
-	};
-
-	matrix_keypad_sleep: matrix_keypad_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9a4, PULL_UP | MUX_MODE7)
-			AM4372_IOPAD(0x9a8, PULL_UP | MUX_MODE7)
-			AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9)
-			AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)
-		>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&uart0_pins_default>;
-	pinctrl-1 = <&uart0_pins_sleep>;
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <100000>;
-
-	tps65218: tps65218@24 {
-		reg = <0x24>;
-		compatible = "ti,tps65218";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			regulator-name = "vdcdc3";
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-state-mem {
-				regulator-on-in-suspend;
-			};
-			regulator-state-disk {
-				regulator-off-in-suspend;
-			};
-		};
-
-		dcdc5: regulator-dcdc5 {
-			regulator-name = "v1_0bat";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-state-mem {
-				regulator-on-in-suspend;
-			};
-		};
-
-		dcdc6: regulator-dcdc6 {
-			regulator-name = "v1_8bat";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-state-mem {
-				regulator-on-in-suspend;
-			};
-		};
-
-		ldo1: regulator-ldo1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-
-	ov2659@30 {
-		compatible = "ovti,ov2659";
-		reg = <0x30>;
-
-		clocks = <&refclk 0>;
-		clock-names = "xvclk";
-
-		port {
-			ov2659_0: endpoint {
-				remote-endpoint = <&vpfe1_ep>;
-				link-frequencies = /bits/ 64 <70000000>;
-			};
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	pixcir_ts@5c {
-		compatible = "pixcir,pixcir_tangoc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pixcir_ts_pins>;
-		reg = <0x5c>;
-
-		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-
-		/*
-		 * 0x264 represents the offset of padconf register of
-		 * gpio3_22 from am43xx_pinmux base.
-		 */
-		interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
-				      <&am43xx_pinmux 0x264>;
-		interrupt-names = "tsc", "wakeup";
-
-		touchscreen-size-x = <1024>;
-		touchscreen-size-y = <600>;
-		wakeup-source;
-	};
-
-	ov2659@30 {
-		compatible = "ovti,ov2659";
-		reg = <0x30>;
-
-		clocks = <&refclk 0>;
-		clock-names = "xvclk";
-
-		port {
-			ov2659_1: endpoint {
-				remote-endpoint = <&vpfe0_ep>;
-				link-frequencies = /bits/ 64 <70000000>;
-			};
-		};
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
-		AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
-		DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
-		DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&tscadc {
-	status = "okay";
-
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6 7>;
-	};
-};
-
-&magadc {
-	status = "okay";
-
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6 7>;
-	};
-};
-
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins>;
-};
-
-&gpio0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio0_pins>;
-	status = "okay";
-
-	sel-emmc-nand-hog {
-		gpio-hog;
-		gpios = <23 GPIO_ACTIVE_HIGH>;
-		/* SelEMMCorNAND selects between eMMC and NAND:
-		 * Low: NAND
-		 * High: eMMC
-		 * When changing this line make sure the newly
-		 * selected device node is enabled and the previously
-		 * selected device node is disabled.
-		 */
-		output-low;
-		line-name = "SelEMMCorNAND";
-	};
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&gpio4 {
-	status = "okay";
-};
-
-&gpio5_target {
-	ti,no-reset-on-init;
-};
-
-&gpio5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&display_mux_pins>;
-	status = "okay";
-
-	sel-lcd-hdmi-hog {
-		/*
-		 * SelLCDorHDMI selects between display and audio paths:
-		 * Low: HDMI display with audio via HDMI
-		 * High: LCD display with analog audio via aic3111 codec
-		 */
-		gpio-hog;
-		gpios = <8 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "SelLCDorHDMI";
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&evm_v3_3d>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-/* eMMC sits on mmc2 */
-&mmc2 {
-	/*
-	 * When enabling eMMC, disable GPMC/NAND and set
-	 * SelEMMCorNAND to output-high
-	 */
-	status = "disabled";
-	vmmc-supply = <&evm_v3_3d>;
-	bus-width = <8>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&emmc_pins_default>;
-	pinctrl-1 = <&emmc_pins_sleep>;
-	non-removable;
-};
-
-&mmc3 {
-	status = "okay";
-	/* these are on the crossbar and are outlined in the
-	   xbar-event-map element */
-	dmas = <&edma_xbar 30 0 1>,
-		<&edma_xbar 31 0 2>;
-	dma-names = "tx", "rx";
-	vmmc-supply = <&vmmcwl_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mmc3_pins_default>;
-	pinctrl-1 = <&mmc3_pins_sleep>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	non-removable;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@0 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <23 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usb2_phy2 {
-	status = "okay";
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-rxid";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	/*
-	 * When enabling GPMC, disable eMMC and set
-	 * SelEMMCorNAND to output-low
-	 */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0x08000000 0x01000000>;	/* CS0 space. Min partition = 16MB */
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>;		/* device IO registers */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
-		ti,nand-xfer-type = "prefetch-dma";
-		ti,nand-ecc-opt = "bch16";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <40>;
-		gpmc,cs-wr-off-ns = <40>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <25>;
-		gpmc,adv-wr-off-ns = <25>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <20>;
-		gpmc,oe-on-ns = <3>;
-		gpmc,oe-off-ns = <30>;
-		gpmc,access-ns = <30>;
-		gpmc,rd-cycle-ns = <40>;
-		gpmc,wr-cycle-ns = <40>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x00040000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00040000 0x00040000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x000c0000 0x00040000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00100000 0x00080000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x00180000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x00280000 0x00040000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x002c0000 0x00040000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00300000 0x00700000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x1f600000>;
-		};
-	};
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&dcan0 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan0_default>;
-	pinctrl-1 = <&dcan0_sleep>;
-	status = "okay";
-};
-
-&dcan1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan1_default>;
-	pinctrl-1 = <&dcan1_sleep>;
-	status = "okay";
-};
-
-&vpfe0 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&vpfe0_pins_default>;
-	pinctrl-1 = <&vpfe0_pins_sleep>;
-
-	port {
-		vpfe0_ep: endpoint {
-			remote-endpoint = <&ov2659_1>;
-			ti,am437x-vpfe-interface = <0>;
-			bus-width = <8>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-		};
-	};
-};
-
-&vpfe1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&vpfe1_pins_default>;
-	pinctrl-1 = <&vpfe1_pins_sleep>;
-
-	port {
-		vpfe1_ep: endpoint {
-			remote-endpoint = <&ov2659_0>;
-			ti,am437x-vpfe-interface = <0>;
-			bus-width = <8>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-		};
-	};
-};
-
-&mcasp1 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp1_pins>;
-	pinctrl-1 = <&mcasp1_sleep_pins>;
-
-	status = "okay";
-
-	op-mode = <0>; /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializers */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		0 0 1 2
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&rtc {
-	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
-	clock-names = "ext-clk", "int-clk";
-	status = "okay";
-};
-
-&cpu {
-	cpu0-supply = <&dcdc2>;
-};
-
-&wkup_m3_ipc {
-	ti,set-io-isolation;
-	firmware-name = "am43x-evm-scale-data.bin";
-};
-
-&pruss1_mdio {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
deleted file mode 100644
index e46cf2a9d075c..0000000000000
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ /dev/null
@@ -1,541 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "TI AM437x Industrial Development Kit";
-	compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43";
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	v24_0d: fixed-regulator-v24_0d {
-		compatible = "regulator-fixed";
-		regulator-name = "V24_0D";
-		regulator-min-microvolt = <24000000>;
-		regulator-max-microvolt = <24000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	v3_3d: fixed-regulator-v3_3d {
-		compatible = "regulator-fixed";
-		regulator-name = "V3_3D";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&v24_0d>;
-	};
-
-	vdd_corereg: fixed-regulator-vdd_corereg {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_COREREG";
-		regulator-min-microvolt = <1100000>;
-		regulator-max-microvolt = <1100000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&v24_0d>;
-	};
-
-	vdd_core: fixed-regulator-vdd_core {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_CORE";
-		regulator-min-microvolt = <1100000>;
-		regulator-max-microvolt = <1100000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vdd_corereg>;
-	};
-
-	v1_8dreg: fixed-regulator-v1_8dreg{
-		compatible = "regulator-fixed";
-		regulator-name = "V1_8DREG";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&v24_0d>;
-	};
-
-	v1_8d: fixed-regulator-v1_8d{
-		compatible = "regulator-fixed";
-		regulator-name = "V1_8D";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&v1_8dreg>;
-	};
-
-	v1_5dreg: fixed-regulator-v1_5dreg{
-		compatible = "regulator-fixed";
-		regulator-name = "V1_5DREG";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&v24_0d>;
-	};
-
-	v1_5d: fixed-regulator-v1_5d{
-		compatible = "regulator-fixed";
-		regulator-name = "V1_5D";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&v1_5dreg>;
-	};
-
-	gpio_keys: gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pins_default>;
-
-		switch-0 {
-			label = "power-button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	/* fixed 32k external oscillator clock */
-	clk_32k_rtc: clk_32k_rtc {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	leds-iio {
-		status = "disabled";
-		compatible = "gpio-leds";
-		led-out0 {
-			label = "out0";
-			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out1 {
-			label = "out1";
-			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out2 {
-			label = "out2";
-			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out3 {
-			label = "out3";
-			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out4 {
-			label = "out4";
-			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out5 {
-			label = "out5";
-			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out6 {
-			label = "out6";
-			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out7 {
-			label = "out7";
-			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
-
-&am43xx_pinmux {
-	gpio_keys_pins_default: gpio_keys_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9b8, PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
-		>;
-	};
-
-	i2c0_pins_default: i2c0_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
-			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c0_pins_sleep: i2c0_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	i2c2_pins_default: i2c2_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9e8, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
-			AM4372_IOPAD(0x9ec, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
-		>;
-	};
-
-	i2c2_pins_sleep: i2c2_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins_default: pinmux_mmc1_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			AM4372_IOPAD(0x9f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			AM4372_IOPAD(0x9f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			AM4372_IOPAD(0x9f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			AM4372_IOPAD(0x9fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x900, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x904, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x960, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	spi1_pins_default: spi1_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x908, PIN_INPUT | MUX_MODE2)	/* mii1_col.spi1_sclk */
-			AM4372_IOPAD(0x910, PIN_INPUT | MUX_MODE2)	/* mii1_rx_er.spi1_d1 */
-			AM4372_IOPAD(0x944, PIN_OUTPUT | MUX_MODE2)	/* rmii1_ref_clk.spi1_cs0 */
-			AM4372_IOPAD(0x90c, PIN_OUTPUT | MUX_MODE7)	/* mii1_crs.gpio3_1 */
-		>;
-	};
-
-	spi1_pins_sleep: spi1_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	ecap0_pins_default: backlight_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	qspi_pins_default: qspi_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
-			AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
-		>;
-	};
-
-	qspi_pins_sleep: qspi_pins_sleep{
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x87c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x898, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2c0_pins_default>;
-	pinctrl-1 = <&i2c0_pins_sleep>;
-	clock-frequency = <400000>;
-
-	at24@50 {
-		compatible = "atmel,24c256";
-		pagesize = <64>;
-		reg = <0x50>;
-	};
-
-	tps: tps62362@60 {
-		compatible = "ti,tps62362";
-		reg = <0x60>;
-		regulator-name = "VDD_MPU";
-		regulator-min-microvolt = <950000>;
-		regulator-max-microvolt = <1330000>;
-		regulator-boot-on;
-		regulator-always-on;
-		ti,vsel0-state-high;
-		ti,vsel1-state-high;
-		vin-supply = <&v3_3d>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2c2_pins_default>;
-	pinctrl-1 = <&i2c2_pins_sleep>;
-	clock-frequency = <100000>;
-
-	tpic2810: tpic2810@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&spi1_pins_default>;
-	pinctrl-1 = <&spi1_pins_sleep>;
-	ti,pindir-d0-out-d1-in;
-
-	sn65hvs882: sn65hvs882@0 {
-		compatible = "pisosr-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		load-gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
-
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		spi-cpol;
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins_default>;
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&gpio4 {
-	status = "okay";
-};
-
-&gpio5 {
-	status = "okay";
-};
-
-&mmc1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_sleep>;
-	vmmc-supply = <&v3_3d>;
-	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_pins_default>;
-	pinctrl-1 = <&qspi_pins_sleep>;
-
-	spi-max-frequency = <48000000>;
-	flash@0 {
-		compatible = "mx66l51235l";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpol;
-		spi-cpha;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/*
-		 * MTD partition table.  The ROM checks the first 512KiB for a
-		 * valid file to boot(XIP).
-		 */
-		partition@0 {
-			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x00080000>;
-		};
-		partition@1 {
-			label = "QSPI.U_BOOT.backup";
-			reg = <0x00080000 0x00080000>;
-		};
-		partition@2 {
-			label = "QSPI.U-BOOT-SPL_OS";
-			reg = <0x00100000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.U_BOOT_ENV";
-			reg = <0x00110000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.U-BOOT-ENV.backup";
-			reg = <0x00120000 0x00010000>;
-		};
-		partition@5 {
-			label = "QSPI.KERNEL";
-			reg = <0x00130000 0x0800000>;
-		};
-		partition@6 {
-			label = "QSPI.FILESYSTEM";
-			reg = <0x00930000 0x36D0000>;
-		};
-	};
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-rxid";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
-
-&rtc {
-	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
-	clock-names = "ext-clk", "int-clk";
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
-
-&cpu {
-	cpu0-supply = <&tps>;
-};
-
-&cpu0_opp_table {
-	/*
-	 * Supply voltage supervisor on board will not allow opp50 so
-	 * disable it and set opp100 as suspend OPP.
-	 */
-	opp50-300000000 {
-		status = "disabled";
-	};
-
-	opp100-600000000 {
-		opp-suspend;
-	};
-};
-
-&pruss1_mdio {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
deleted file mode 100644
index 415210b034efa..0000000000000
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ /dev/null
@@ -1,2584 +0,0 @@
-&l4_wkup {						/* 0x44c00000 */
-	compatible = "ti,am4-l4-wkup", "simple-pm-bus";
-	power-domains = <&prm_wkup>;
-	clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_L4_WKUP_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x44c00000 0x800>,
-	      <0x44c00800 0x800>,
-	      <0x44c01000 0x400>,
-	      <0x44c01400 0x400>;
-	reg-names = "ap", "la", "ia0", "ia1";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x44c00000 0x100000>,	/* segment 0 */
-		 <0x00100000 0x44d00000 0x100000>,	/* segment 1 */
-		 <0x00200000 0x44e00000 0x100000>;	/* segment 2 */
-
-	segment@0 {					/* 0x44c00000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
-			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
-			 <0x00001400 0x00001400 0x000400>;	/* ap 3 */
-	};
-
-	segment@100000 {					/* 0x44d00000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00100000 0x004000>,	/* ap 4 */
-			 <0x00004000 0x00104000 0x001000>,	/* ap 5 */
-			 <0x00080000 0x00180000 0x002000>,	/* ap 6 */
-			 <0x00082000 0x00182000 0x001000>,	/* ap 7 */
-			 <0x000f0000 0x001f0000 0x010000>;	/* ap 8 */
-
-		target-module@0 {			/* 0x44d00000, ap 4 28.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x0 0x4>;
-			reg-names = "rev";
-			clocks = <&l4_wkup_aon_clkctrl AM4_L4_WKUP_AON_WKUP_M3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00000000 0x4000>,
-				 <0x00080000 0x00080000 0x2000>;
-
-			wkup_m3: cpu@0 {
-				compatible = "ti,am4372-wkup-m3";
-				reg = <0x00000000 0x4000>,
-				      <0x00080000 0x2000>;
-				reg-names = "umem", "dmem";
-				resets = <&prm_wkup 3>;
-				reset-names = "rstctrl";
-				ti,pm-firmware = "am335x-pm-firmware.elf";
-			};
-		};
-
-		target-module@f0000 {			/* 0x44df0000, ap 8 58.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xf0000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xf0000 0x10000>;
-
-			prcm: prcm@0 {
-				compatible = "ti,am4-prcm", "simple-bus";
-				reg = <0x0 0x11000>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x11000>;
-
-				prcm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prcm_clockdomains: clockdomains {
-				};
-			};
-		};
-	};
-
-	segment@200000 {					/* 0x44e00000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00200000 0x001000>,	/* ap 9 */
-			 <0x00003000 0x00203000 0x001000>,	/* ap 10 */
-			 <0x00004000 0x00204000 0x001000>,	/* ap 11 */
-			 <0x00005000 0x00205000 0x001000>,	/* ap 12 */
-			 <0x00006000 0x00206000 0x001000>,	/* ap 13 */
-			 <0x00007000 0x00207000 0x001000>,	/* ap 14 */
-			 <0x00008000 0x00208000 0x001000>,	/* ap 15 */
-			 <0x00009000 0x00209000 0x001000>,	/* ap 16 */
-			 <0x0000a000 0x0020a000 0x001000>,	/* ap 17 */
-			 <0x0000b000 0x0020b000 0x001000>,	/* ap 18 */
-			 <0x0000c000 0x0020c000 0x001000>,	/* ap 19 */
-			 <0x0000d000 0x0020d000 0x001000>,	/* ap 20 */
-			 <0x0000f000 0x0020f000 0x001000>,	/* ap 21 */
-			 <0x00010000 0x00210000 0x010000>,	/* ap 22 */
-			 <0x00030000 0x00230000 0x001000>,	/* ap 23 */
-			 <0x00031000 0x00231000 0x001000>,	/* ap 24 */
-			 <0x00032000 0x00232000 0x001000>,	/* ap 25 */
-			 <0x00033000 0x00233000 0x001000>,	/* ap 26 */
-			 <0x00034000 0x00234000 0x001000>,	/* ap 27 */
-			 <0x00035000 0x00235000 0x001000>,	/* ap 28 */
-			 <0x00036000 0x00236000 0x001000>,	/* ap 29 */
-			 <0x00037000 0x00237000 0x001000>,	/* ap 30 */
-			 <0x00038000 0x00238000 0x001000>,	/* ap 31 */
-			 <0x00039000 0x00239000 0x001000>,	/* ap 32 */
-			 <0x0003a000 0x0023a000 0x001000>,	/* ap 33 */
-			 <0x0003e000 0x0023e000 0x001000>,	/* ap 34 */
-			 <0x0003f000 0x0023f000 0x001000>,	/* ap 35 */
-			 <0x00040000 0x00240000 0x040000>,	/* ap 36 */
-			 <0x00080000 0x00280000 0x001000>,	/* ap 37 */
-			 <0x00088000 0x00288000 0x008000>,	/* ap 38 */
-			 <0x00092000 0x00292000 0x001000>,	/* ap 39 */
-			 <0x00086000 0x00286000 0x001000>,	/* ap 40 */
-			 <0x00087000 0x00287000 0x001000>,	/* ap 41 */
-			 <0x00090000 0x00290000 0x001000>,	/* ap 42 */
-			 <0x00091000 0x00291000 0x001000>;	/* ap 43 */
-
-		target-module@3000 {			/* 0x44e03000, ap 10 0a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3000 0x1000>;
-		};
-
-		target-module@5000 {			/* 0x44e05000, ap 12 30.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5000 0x1000>;
-		};
-
-		target-module@7000 {			/* 0x44e07000, ap 14 20.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x7000 0x4>,
-			      <0x7010 0x4>,
-			      <0x7114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_GPIO1_CLKCTRL 0>,
-				 <&l4_wkup_clkctrl AM4_L4_WKUP_GPIO1_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x7000 0x1000>;
-
-			gpio0: gpio@0 {
-				compatible = "ti,am4372-gpio","ti,omap4-gpio";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-		};
-
-		target-module@9000 {			/* 0x44e09000, ap 16 04.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x9050 0x4>,
-			      <0x9054 0x4>,
-			      <0x9058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_UART1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x9000 0x1000>;
-
-			uart0: serial@0 {
-				compatible = "ti,am4372-uart";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@b000 {			/* 0x44e0b000, ap 18 48.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xb000 0x8>,
-			      <0xb010 0x8>,
-			      <0xb090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_I2C1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb000 0x1000>;
-
-			i2c0: i2c@0 {
-				compatible = "ti,am4372-i2c","ti,omap4-i2c";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		target-module@d000 {			/* 0x44e0d000, ap 20 38.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xd000 0x4>,
-			      <0xd010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): wkup_pwrdm, l3s_tsc_clkdm */
-			clocks = <&l3s_tsc_clkctrl AM4_L3S_TSC_ADC_TSC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xd000 0x1000>;
-
-			tscadc: tscadc@0 {
-				compatible = "ti,am3359-tscadc";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&adc_tsc_fck>;
-				clock-names = "fck";
-				status = "disabled";
-				dmas = <&edma 53 0>, <&edma 57 0>;
-				dma-names = "fifo0", "fifo1";
-
-				tsc {
-					compatible = "ti,am3359-tsc";
-				};
-
-				adc {
-					#io-channel-cells = <1>;
-					compatible = "ti,am3359-adc";
-				};
-
-			};
-		};
-
-		target-module@10000 {			/* 0x44e10000, ap 22 0c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x10000 0x4>;
-			reg-names = "rev";
-			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_CONTROL_CLKCTRL 0>;
-			clock-names = "fck";
-			ti,no-idle;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x10000 0x10000>;
-
-			scm: scm@0 {
-				compatible = "ti,am4-scm", "simple-bus";
-				reg = <0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x4000>;
-
-				am43xx_pinmux: pinmux@800 {
-					compatible = "ti,am437-padconf",
-						     "pinctrl-single";
-					reg = <0x800 0x31c>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					#interrupt-cells = <1>;
-					interrupt-controller;
-					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0xffffffff>;
-				};
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
-					reg = <0x0 0x800>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					phy_gmii_sel: phy-gmii-sel {
-						compatible = "ti,am43xx-phy-gmii-sel";
-						reg = <0x650 0x4>;
-						#phy-cells = <2>;
-					};
-
-					scm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				wkup_m3_ipc: wkup_m3_ipc@1324 {
-					compatible = "ti,am4372-wkup-m3-ipc";
-					reg = <0x1324 0x44>;
-					interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-					ti,rproc = <&wkup_m3>;
-					mboxes = <&mailbox &mbox_wkupm3>;
-				};
-
-				edma_xbar: dma-router@f90 {
-					compatible = "ti,am335x-edma-crossbar";
-					reg = <0xf90 0x40>;
-					#dma-cells = <3>;
-					dma-requests = <64>;
-					dma-masters = <&edma>;
-				};
-
-				scm_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		timer1_target: target-module@31000 {	/* 0x44e31000, ap 24 40.0 */
-			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			reg = <0x31000 0x4>,
-			      <0x31010 0x4>,
-			      <0x31014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_TIMER1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x31000 0x1000>;
-
-			timer1: timer@0 {
-				compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-alwon;
-				clocks = <&timer1_fck>;
-				clock-names = "fck";
-			};
-		};
-
-		target-module@33000 {			/* 0x44e33000, ap 26 18.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x33000 0x1000>;
-		};
-
-		target-module@35000 {			/* 0x44e35000, ap 28 50.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x35000 0x4>,
-			      <0x35010 0x4>,
-			      <0x35014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_WD_TIMER2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x35000 0x1000>;
-
-			wdt: wdt@0 {
-				compatible = "ti,am4372-wdt","ti,omap3-wdt";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@37000 {			/* 0x44e37000, ap 30 08.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x37000 0x1000>;
-		};
-
-		target-module@39000 {			/* 0x44e39000, ap 32 02.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x39000 0x1000>;
-		};
-
-		rtc_target: target-module@3e000 {	/* 0x44e3e000, ap 34 60.0 */
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x3e074 0x4>,
-			      <0x3e078 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */
-			power-domains = <&prm_rtc>;
-			clocks = <&l4_rtc_clkctrl AM4_L4_RTC_RTC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3e000 0x1000>;
-
-			rtc: rtc@0 {
-				compatible = "ti,am4372-rtc", "ti,am3352-rtc",
-					     "ti,da830-rtc";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
-					      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk_32768_ck>;
-				clock-names = "int-clk";
-				system-power-controller;
-				status = "disabled";
-			};
-		};
-
-		target-module@40000 {			/* 0x44e40000, ap 36 68.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x40000 0x40000>;
-		};
-
-		target-module@86000 {			/* 0x44e86000, ap 40 70.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x86000 0x4>,
-			      <0x86004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			/* Domains (P, C): wkup_pwrdm, l4_wkup_aon_clkdm */
-			clocks = <&l4_wkup_aon_clkctrl AM4_L4_WKUP_AON_COUNTER_32K_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x86000 0x1000>;
-
-			counter32k: counter@0 {
-				compatible = "ti,am4372-counter32k","ti,omap-counter32k";
-				reg = <0x0 0x40>;
-			};
-		};
-
-		target-module@88000 {			/* 0x44e88000, ap 38 12.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00088000 0x00008000>,
-				 <0x00008000 0x00090000 0x00001000>,
-				 <0x00009000 0x00091000 0x00001000>;
-		};
-	};
-};
-
-&l4_fast {					/* 0x4a000000 */
-	compatible = "ti,am4-l4-fast", "simple-pm-bus";
-	power-domains = <&prm_per>;
-	clocks = <&l3_clkctrl AM4_L3_L4_HS_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x4a000000 0x800>,
-	      <0x4a000800 0x800>,
-	      <0x4a001000 0x400>;
-	reg-names = "ap", "la", "ia0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x4a000000 0x1000000>;	/* segment 0 */
-
-	segment@0 {					/* 0x4a000000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
-			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
-			 <0x00100000 0x00100000 0x008000>,	/* ap 3 */
-			 <0x00108000 0x00108000 0x001000>,	/* ap 4 */
-			 <0x00400000 0x00400000 0x002000>,	/* ap 5 */
-			 <0x00402000 0x00402000 0x001000>,	/* ap 6 */
-			 <0x00200000 0x00200000 0x080000>,	/* ap 7 */
-			 <0x00280000 0x00280000 0x001000>;	/* ap 8 */
-
-		target-module@100000 {			/* 0x4a100000, ap 3 04.0 */
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x101200 0x4>,
-			      <0x101208 0x4>,
-			      <0x101204 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <0>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			ti,syss-mask = <1>;
-			clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x100000 0x8000>;
-
-			mac_sw: switch@0 {
-				compatible = "ti,am4372-cpsw-switch", "ti,cpsw-switch";
-				reg = <0x0 0x4000>;
-				ranges = <0 0 0x4000>;
-				clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>;
-				clock-names = "fck", "50mclk";
-				assigned-clocks = <&dpll_clksel_mac_clk>;
-				assigned-clock-rates = <50000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				syscon = <&scm_conf>;
-				status = "disabled";
-
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
-					      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
-					      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
-					      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "rx_thresh", "rx", "tx", "misc";
-
-				ethernet-ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					cpsw_port1: port@1 {
-						reg = <1>;
-						label = "port1";
-						mac-address = [ 00 00 00 00 00 00 ];
-						phys = <&phy_gmii_sel 1 0>;
-					};
-
-					cpsw_port2: port@2 {
-						reg = <2>;
-						label = "port2";
-						mac-address = [ 00 00 00 00 00 00 ];
-						phys = <&phy_gmii_sel 2 0>;
-					};
-				};
-
-				davinci_mdio_sw: mdio@1000 {
-					compatible = "ti,am4372-mdio", "ti,cpsw-mdio","ti,davinci_mdio";
-					clocks = <&cpsw_125mhz_gclk>;
-					clock-names = "fck";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					bus_freq = <1000000>;
-					reg = <0x1000 0x100>;
-				};
-
-				cpts {
-					clocks = <&cpsw_cpts_rft_clk>;
-					clock-names = "cpts";
-				};
-			};
-		};
-
-		target-module@200000 {			/* 0x4a200000, ap 7 02.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x200000 0x80000>;
-		};
-
-		target-module@400000 {			/* 0x4a400000, ap 5 08.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x400000 0x2000>;
-		};
-	};
-};
-
-&l4_per {					/* 0x48000000 */
-	compatible = "ti,am4-l4-per", "simple-pm-bus";
-	power-domains = <&prm_per>;
-	clocks = <&l4ls_clkctrl AM4_L4LS_L4_LS_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x48000000 0x800>,
-	      <0x48000800 0x800>,
-	      <0x48001000 0x400>,
-	      <0x48001400 0x400>,
-	      <0x48001800 0x400>,
-	      <0x48001c00 0x400>;
-	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x48000000 0x100000>,	/* segment 0 */
-		 <0x00100000 0x48100000 0x100000>,	/* segment 1 */
-		 <0x00200000 0x48200000 0x100000>,	/* segment 2 */
-		 <0x00300000 0x48300000 0x100000>,	/* segment 3 */
-		 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
-		 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
-
-	segment@0 {					/* 0x48000000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
-			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
-			 <0x00001400 0x00001400 0x000400>,	/* ap 3 */
-			 <0x00001800 0x00001800 0x000400>,	/* ap 4 */
-			 <0x00001c00 0x00001c00 0x000400>,	/* ap 5 */
-			 <0x00008000 0x00008000 0x001000>,	/* ap 6 */
-			 <0x00009000 0x00009000 0x001000>,	/* ap 7 */
-			 <0x00022000 0x00022000 0x001000>,	/* ap 8 */
-			 <0x00023000 0x00023000 0x001000>,	/* ap 9 */
-			 <0x00024000 0x00024000 0x001000>,	/* ap 10 */
-			 <0x00025000 0x00025000 0x001000>,	/* ap 11 */
-			 <0x0002a000 0x0002a000 0x001000>,	/* ap 12 */
-			 <0x0002b000 0x0002b000 0x001000>,	/* ap 13 */
-			 <0x00038000 0x00038000 0x002000>,	/* ap 14 */
-			 <0x0003a000 0x0003a000 0x001000>,	/* ap 15 */
-			 <0x0003c000 0x0003c000 0x002000>,	/* ap 16 */
-			 <0x0003e000 0x0003e000 0x001000>,	/* ap 17 */
-			 <0x00040000 0x00040000 0x001000>,	/* ap 18 */
-			 <0x00041000 0x00041000 0x001000>,	/* ap 19 */
-			 <0x00042000 0x00042000 0x001000>,	/* ap 20 */
-			 <0x00043000 0x00043000 0x001000>,	/* ap 21 */
-			 <0x00044000 0x00044000 0x001000>,	/* ap 22 */
-			 <0x00045000 0x00045000 0x001000>,	/* ap 23 */
-			 <0x00046000 0x00046000 0x001000>,	/* ap 24 */
-			 <0x00047000 0x00047000 0x001000>,	/* ap 25 */
-			 <0x00048000 0x00048000 0x001000>,	/* ap 26 */
-			 <0x00049000 0x00049000 0x001000>,	/* ap 27 */
-			 <0x0004c000 0x0004c000 0x001000>,	/* ap 28 */
-			 <0x0004d000 0x0004d000 0x001000>,	/* ap 29 */
-			 <0x00060000 0x00060000 0x001000>,	/* ap 30 */
-			 <0x00061000 0x00061000 0x001000>,	/* ap 31 */
-			 <0x00080000 0x00080000 0x010000>,	/* ap 32 */
-			 <0x00090000 0x00090000 0x001000>,	/* ap 33 */
-			 <0x00030000 0x00030000 0x001000>,	/* ap 65 */
-			 <0x00031000 0x00031000 0x001000>,	/* ap 66 */
-			 <0x0004a000 0x0004a000 0x001000>,	/* ap 71 */
-			 <0x0004b000 0x0004b000 0x001000>,	/* ap 72 */
-			 <0x000c8000 0x000c8000 0x001000>,	/* ap 73 */
-			 <0x000c9000 0x000c9000 0x001000>,	/* ap 74 */
-			 <0x000ca000 0x000ca000 0x001000>,	/* ap 77 */
-			 <0x000cb000 0x000cb000 0x001000>,	/* ap 78 */
-			 <0x00034000 0x00034000 0x001000>,	/* ap 80 */
-			 <0x00035000 0x00035000 0x001000>,	/* ap 81 */
-			 <0x00036000 0x00036000 0x001000>,	/* ap 84 */
-			 <0x00037000 0x00037000 0x001000>,	/* ap 85 */
-			 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
-			 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
-
-		target-module@8000 {			/* 0x48008000, ap 6 10.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8000 0x1000>;
-		};
-
-		target-module@22000 {			/* 0x48022000, ap 8 0a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x22050 0x4>,
-			      <0x22054 0x4>,
-			      <0x22058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_UART2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x22000 0x1000>;
-
-			uart1: serial@0 {
-				compatible = "ti,am4372-uart";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@24000 {			/* 0x48024000, ap 10 1c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x24050 0x4>,
-			      <0x24054 0x4>,
-			      <0x24058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_UART3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x24000 0x1000>;
-
-			uart2: serial@0 {
-				compatible = "ti,am4372-uart";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@2a000 {			/* 0x4802a000, ap 12 22.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x2a000 0x8>,
-			      <0x2a010 0x8>,
-			      <0x2a090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_I2C2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2a000 0x1000>;
-
-			i2c1: i2c@0 {
-				compatible = "ti,am4372-i2c","ti,omap4-i2c";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		target-module@30000 {			/* 0x48030000, ap 65 08.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x30000 0x4>,
-			      <0x30110 0x4>,
-			      <0x30114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_SPI0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x30000 0x1000>;
-
-			spi0: spi@0 {
-				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		target-module@34000 {			/* 0x48034000, ap 80 56.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x34000 0x1000>;
-		};
-
-		target-module@36000 {			/* 0x48036000, ap 84 3e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x36000 0x1000>;
-		};
-
-		target-module@38000 {			/* 0x48038000, ap 14 04.0 */
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x38000 0x4>,
-			      <0x38004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): per_pwrdm, l3s_clkdm */
-			clocks = <&l3s_clkctrl AM4_L3S_MCASP0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x38000 0x2000>,
-				 <0x46000000 0x46000000 0x400000>;
-
-			mcasp0: mcasp@0 {
-				compatible = "ti,am33xx-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x46000000 0x400000>;
-				reg-names = "mpu", "dat";
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx", "rx";
-				status = "disabled";
-				dmas = <&edma 8 2>,
-				       <&edma 9 2>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@3c000 {			/* 0x4803c000, ap 16 2a.0 */
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x3c000 0x4>,
-			      <0x3c004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): per_pwrdm, l3s_clkdm */
-			clocks = <&l3s_clkctrl AM4_L3S_MCASP1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3c000 0x2000>,
-				 <0x46400000 0x46400000 0x400000>;
-
-			mcasp1: mcasp@0 {
-				compatible = "ti,am33xx-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x46400000 0x400000>;
-				reg-names = "mpu", "dat";
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx", "rx";
-				status = "disabled";
-				dmas = <&edma 10 2>,
-				       <&edma 11 2>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		timer2_target: target-module@40000 {	/* 0x48040000, ap 18 1e.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x40000 0x4>,
-			      <0x40010 0x4>,
-			      <0x40014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x40000 0x1000>;
-
-			timer2: timer@0  {
-				compatible = "ti,am4372-timer","ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&timer2_fck>;
-				clock-names = "fck";
-			};
-		};
-
-		target-module@42000 {			/* 0x48042000, ap 20 24.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x42000 0x4>,
-			      <0x42010 0x4>,
-			      <0x42014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x42000 0x1000>;
-
-			timer3: timer@0 {
-				compatible = "ti,am4372-timer","ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@44000 {			/* 0x48044000, ap 22 26.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x44000 0x4>,
-			      <0x44010 0x4>,
-			      <0x44014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x44000 0x1000>;
-
-			timer4: timer@0 {
-				compatible = "ti,am4372-timer","ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-				status = "disabled";
-			};
-		};
-
-		target-module@46000 {			/* 0x48046000, ap 24 28.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x46000 0x4>,
-			      <0x46010 0x4>,
-			      <0x46014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x46000 0x1000>;
-
-			timer5: timer@0 {
-				compatible = "ti,am4372-timer","ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-				status = "disabled";
-			};
-		};
-
-		target-module@48000 {			/* 0x48048000, ap 26 1a.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x48000 0x4>,
-			      <0x48010 0x4>,
-			      <0x48014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER6_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48000 0x1000>;
-
-			timer6: timer@0 {
-				compatible = "ti,am4372-timer","ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-				status = "disabled";
-			};
-		};
-
-		target-module@4a000 {			/* 0x4804a000, ap 71 48.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x4a000 0x4>,
-			      <0x4a010 0x4>,
-			      <0x4a014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER7_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4a000 0x1000>;
-
-			timer7: timer@0 {
-				compatible = "ti,am4372-timer","ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-				status = "disabled";
-			};
-		};
-
-		target-module@4c000 {			/* 0x4804c000, ap 28 36.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4c000 0x4>,
-			      <0x4c010 0x4>,
-			      <0x4c114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO2_CLKCTRL 0>,
-				 <&l4ls_clkctrl AM4_L4LS_GPIO2_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4c000 0x1000>;
-
-			gpio1: gpio@0 {
-				compatible = "ti,am4372-gpio","ti,omap4-gpio";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-		};
-
-		target-module@60000 {			/* 0x48060000, ap 30 14.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x602fc 0x4>,
-			      <0x60110 0x4>,
-			      <0x60114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_MMC1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x60000 0x1000>;
-
-			mmc1: mmc@0 {
-				compatible = "ti,am437-sdhci";
-				reg = <0x0 0x1000>;
-				ti,needs-special-reset;
-				dmas = <&edma 24 0>,
-					<&edma 25 0>;
-				dma-names = "tx", "rx";
-				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@80000 {			/* 0x48080000, ap 32 18.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x80000 0x4>,
-			      <0x80010 0x4>,
-			      <0x80014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_ELM_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x80000 0x10000>;
-
-			elm: elm@0 {
-				compatible = "ti,am3352-elm";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&l4ls_gclk>;
-				clock-names = "fck";
-				status = "disabled";
-			};
-		};
-
-		target-module@c8000 {			/* 0x480c8000, ap 73 06.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xc8000 0x4>,
-			      <0xc8010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_MAILBOX_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc8000 0x1000>;
-
-			mailbox: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <8>;
-				mbox_wkupm3: mbox-wkup-m3 {
-					ti,mbox-send-noirq;
-					ti,mbox-tx = <0 0 0>;
-					ti,mbox-rx = <0 0 3>;
-				};
-			};
-		};
-
-		target-module@ca000 {			/* 0x480ca000, ap 77 38.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xca000 0x4>,
-			      <0xca010 0x4>,
-			      <0xca014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_SPINLOCK_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xca000 0x1000>;
-
-			hwspinlock: spinlock@0 {
-				compatible = "ti,omap4-hwspinlock";
-				reg = <0x0 0x1000>;
-				#hwlock-cells = <1>;
-			};
-		};
-	};
-
-	segment@100000 {					/* 0x48100000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0008c000 0x0018c000 0x001000>,	/* ap 34 */
-			 <0x0008d000 0x0018d000 0x001000>,	/* ap 35 */
-			 <0x0008e000 0x0018e000 0x001000>,	/* ap 36 */
-			 <0x0008f000 0x0018f000 0x001000>,	/* ap 37 */
-			 <0x0009c000 0x0019c000 0x001000>,	/* ap 38 */
-			 <0x0009d000 0x0019d000 0x001000>,	/* ap 39 */
-			 <0x000a6000 0x001a6000 0x001000>,	/* ap 40 */
-			 <0x000a7000 0x001a7000 0x001000>,	/* ap 41 */
-			 <0x000a8000 0x001a8000 0x001000>,	/* ap 42 */
-			 <0x000a9000 0x001a9000 0x001000>,	/* ap 43 */
-			 <0x000aa000 0x001aa000 0x001000>,	/* ap 44 */
-			 <0x000ab000 0x001ab000 0x001000>,	/* ap 45 */
-			 <0x000ac000 0x001ac000 0x001000>,	/* ap 46 */
-			 <0x000ad000 0x001ad000 0x001000>,	/* ap 47 */
-			 <0x000ae000 0x001ae000 0x001000>,	/* ap 48 */
-			 <0x000af000 0x001af000 0x001000>,	/* ap 49 */
-			 <0x000cc000 0x001cc000 0x002000>,	/* ap 50 */
-			 <0x000ce000 0x001ce000 0x002000>,	/* ap 51 */
-			 <0x000d0000 0x001d0000 0x002000>,	/* ap 52 */
-			 <0x000d2000 0x001d2000 0x002000>,	/* ap 53 */
-			 <0x000d8000 0x001d8000 0x001000>,	/* ap 54 */
-			 <0x000d9000 0x001d9000 0x001000>,	/* ap 55 */
-			 <0x000a0000 0x001a0000 0x001000>,	/* ap 67 */
-			 <0x000a1000 0x001a1000 0x001000>,	/* ap 68 */
-			 <0x000a2000 0x001a2000 0x001000>,	/* ap 69 */
-			 <0x000a3000 0x001a3000 0x001000>,	/* ap 70 */
-			 <0x000a4000 0x001a4000 0x001000>,	/* ap 92 */
-			 <0x000a5000 0x001a5000 0x001000>,	/* ap 93 */
-			 <0x000c1000 0x001c1000 0x001000>,	/* ap 94 */
-			 <0x000c2000 0x001c2000 0x001000>;	/* ap 95 */
-
-		target-module@8c000 {			/* 0x4818c000, ap 34 0c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8c000 0x1000>;
-		};
-
-		target-module@8e000 {			/* 0x4818e000, ap 36 02.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8e000 0x1000>;
-		};
-
-		target-module@9c000 {			/* 0x4819c000, ap 38 52.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x9c000 0x8>,
-			      <0x9c010 0x8>,
-			      <0x9c090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_I2C3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x9c000 0x1000>;
-
-			i2c2: i2c@0 {
-				compatible = "ti,am4372-i2c","ti,omap4-i2c";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		target-module@a0000 {			/* 0x481a0000, ap 67 2c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xa0000 0x4>,
-			      <0xa0110 0x4>,
-			      <0xa0114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_SPI1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa0000 0x1000>;
-
-			spi1: spi@0 {
-				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		target-module@a2000 {			/* 0x481a2000, ap 69 2e.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xa2000 0x4>,
-			      <0xa2110 0x4>,
-			      <0xa2114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_SPI2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa2000 0x1000>;
-
-			spi2: spi@0 {
-				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		target-module@a4000 {			/* 0x481a4000, ap 92 62.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xa4000 0x4>,
-			      <0xa4110 0x4>,
-			      <0xa4114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_SPI3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa4000 0x1000>;
-
-			spi3: spi@0 {
-				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		target-module@a6000 {			/* 0x481a6000, ap 40 16.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xa6050 0x4>,
-			      <0xa6054 0x4>,
-			      <0xa6058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_UART4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa6000 0x1000>;
-
-			uart3: serial@0 {
-				compatible = "ti,am4372-uart";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@a8000 {			/* 0x481a8000, ap 42 20.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xa8050 0x4>,
-			      <0xa8054 0x4>,
-			      <0xa8058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_UART5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa8000 0x1000>;
-
-			uart4: serial@0 {
-				compatible = "ti,am4372-uart";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@aa000 {			/* 0x481aa000, ap 44 12.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xaa050 0x4>,
-			      <0xaa054 0x4>,
-			      <0xaa058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_UART6_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xaa000 0x1000>;
-
-			uart5: serial@0 {
-				compatible = "ti,am4372-uart";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@ac000 {			/* 0x481ac000, ap 46 30.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xac000 0x4>,
-			      <0xac010 0x4>,
-			      <0xac114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO3_CLKCTRL 0>,
-				 <&l4ls_clkctrl AM4_L4LS_GPIO3_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xac000 0x1000>;
-
-			gpio2: gpio@0 {
-				compatible = "ti,am4372-gpio","ti,omap4-gpio";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-		};
-
-		target-module@ae000 {			/* 0x481ae000, ap 48 32.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xae000 0x4>,
-			      <0xae010 0x4>,
-			      <0xae114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO4_CLKCTRL 0>,
-				 <&l4ls_clkctrl AM4_L4LS_GPIO4_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xae000 0x1000>;
-
-			gpio3: gpio@0 {
-				compatible = "ti,am4372-gpio","ti,omap4-gpio";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-		};
-
-		target-module@c1000 {			/* 0x481c1000, ap 94 68.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0xc1000 0x4>,
-			      <0xc1010 0x4>,
-			      <0xc1014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER8_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc1000 0x1000>;
-
-			timer8: timer@0 {
-				compatible = "ti,am4372-timer","ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@cc000 {			/* 0x481cc000, ap 50 46.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xcc020 0x4>;
-			reg-names = "rev";
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>,
-			<&dcan0_fck>;
-			clock-names = "fck", "osc";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xcc000 0x2000>;
-
-			dcan0: can@0 {
-				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
-				reg = <0x0 0x2000>;
-				clocks = <&dcan0_fck>;
-				clock-names = "fck";
-				syscon-raminit = <&scm_conf 0x644 0>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@d0000 {			/* 0x481d0000, ap 52 3a.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xd0020 0x4>;
-			reg-names = "rev";
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>,
-			<&dcan1_fck>;
-			clock-names = "fck", "osc";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xd0000 0x2000>;
-
-			dcan1: can@0 {
-				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
-				reg = <0x0 0x2000>;
-				clocks = <&dcan1_fck>;
-				clock-names = "fck";
-				syscon-raminit = <&scm_conf 0x644 1>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@d8000 {			/* 0x481d8000, ap 54 5e.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xd82fc 0x4>,
-			      <0xd8110 0x4>,
-			      <0xd8114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_MMC2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xd8000 0x1000>;
-
-			mmc2: mmc@0 {
-				compatible = "ti,am437-sdhci";
-				reg = <0x0 0x1000>;
-				ti,needs-special-reset;
-				dmas = <&edma 2 0>,
-					<&edma 3 0>;
-				dma-names = "tx", "rx";
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-	};
-
-	segment@200000 {					/* 0x48200000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00200000 0x010000>;
-
-		target-module@0 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			power-domains = <&prm_mpu>;
-			clocks = <&mpu_clkctrl AM4_MPU_MPU_CLKCTRL 0>;
-			clock-names = "fck";
-			ti,no-idle;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0x10000>;
-
-			mpu@0 {
-				compatible = "ti,omap4-mpu";
-				pm-sram = <&pm_sram_code
-					   &pm_sram_data>;
-			};
-		};
-	};
-
-	segment@300000 {					/* 0x48300000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00300000 0x001000>,	/* ap 56 */
-			 <0x00001000 0x00301000 0x001000>,	/* ap 57 */
-			 <0x00002000 0x00302000 0x001000>,	/* ap 58 */
-			 <0x00003000 0x00303000 0x001000>,	/* ap 59 */
-			 <0x00004000 0x00304000 0x001000>,	/* ap 60 */
-			 <0x00005000 0x00305000 0x001000>,	/* ap 61 */
-			 <0x00018000 0x00318000 0x004000>,	/* ap 62 */
-			 <0x0001c000 0x0031c000 0x001000>,	/* ap 63 */
-			 <0x00010000 0x00310000 0x002000>,	/* ap 64 */
-			 <0x00028000 0x00328000 0x001000>,	/* ap 75 */
-			 <0x00029000 0x00329000 0x001000>,	/* ap 76 */
-			 <0x00012000 0x00312000 0x001000>,	/* ap 79 */
-			 <0x00020000 0x00320000 0x001000>,	/* ap 82 */
-			 <0x00021000 0x00321000 0x001000>,	/* ap 83 */
-			 <0x00026000 0x00326000 0x001000>,	/* ap 86 */
-			 <0x00027000 0x00327000 0x001000>,	/* ap 87 */
-			 <0x0002a000 0x0032a000 0x000400>,	/* ap 88 */
-			 <0x0002c000 0x0032c000 0x001000>,	/* ap 89 */
-			 <0x00013000 0x00313000 0x001000>,	/* ap 90 */
-			 <0x00014000 0x00314000 0x001000>,	/* ap 91 */
-			 <0x00006000 0x00306000 0x001000>,	/* ap 96 */
-			 <0x00007000 0x00307000 0x001000>,	/* ap 97 */
-			 <0x00008000 0x00308000 0x001000>,	/* ap 98 */
-			 <0x00009000 0x00309000 0x001000>,	/* ap 99 */
-			 <0x0000a000 0x0030a000 0x001000>,	/* ap 100 */
-			 <0x0000b000 0x0030b000 0x001000>,	/* ap 101 */
-			 <0x0003d000 0x0033d000 0x001000>,	/* ap 102 */
-			 <0x0003e000 0x0033e000 0x001000>,	/* ap 103 */
-			 <0x0003f000 0x0033f000 0x001000>,	/* ap 104 */
-			 <0x00040000 0x00340000 0x001000>,	/* ap 105 */
-			 <0x00041000 0x00341000 0x001000>,	/* ap 106 */
-			 <0x00042000 0x00342000 0x001000>,	/* ap 107 */
-			 <0x00045000 0x00345000 0x001000>,	/* ap 108 */
-			 <0x00046000 0x00346000 0x001000>,	/* ap 109 */
-			 <0x00047000 0x00347000 0x001000>,	/* ap 110 */
-			 <0x00048000 0x00348000 0x001000>,	/* ap 111 */
-			 <0x000f2000 0x003f2000 0x002000>,	/* ap 112 */
-			 <0x000f4000 0x003f4000 0x001000>,	/* ap 113 */
-			 <0x0004c000 0x0034c000 0x002000>,	/* ap 114 */
-			 <0x0004e000 0x0034e000 0x001000>,	/* ap 115 */
-			 <0x00022000 0x00322000 0x001000>,	/* ap 116 */
-			 <0x00023000 0x00323000 0x001000>,	/* ap 117 */
-			 <0x000f0000 0x003f0000 0x001000>,	/* ap 118 */
-			 <0x0002a400 0x0032a400 0x000400>,	/* ap 119 */
-			 <0x0002a800 0x0032a800 0x000400>,	/* ap 120 */
-			 <0x0002ac00 0x0032ac00 0x000400>,	/* ap 121 */
-			 <0x0002b000 0x0032b000 0x001000>,	/* ap 122 */
-			 <0x00080000 0x00380000 0x020000>,	/* ap 123 */
-			 <0x000a0000 0x003a0000 0x001000>,	/* ap 124 */
-			 <0x000a8000 0x003a8000 0x008000>,	/* ap 125 */
-			 <0x000b0000 0x003b0000 0x001000>,	/* ap 126 */
-			 <0x000c0000 0x003c0000 0x020000>,	/* ap 127 */
-			 <0x000e0000 0x003e0000 0x001000>,	/* ap 128 */
-			 <0x000e8000 0x003e8000 0x008000>;	/* ap 129 */
-
-		target-module@0 {			/* 0x48300000, ap 56 40.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x0 0x4>,
-			      <0x4 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x1000>;
-
-			epwmss0: epwmss@0 {
-				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-				reg = <0x0 0x10>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x1000>;
-				status = "disabled";
-
-				ecap0: pwm@100 {
-					compatible = "ti,am4372-ecap",
-						     "ti,am3352-ecap";
-					#pwm-cells = <3>;
-					reg = <0x100 0x80>;
-					clocks = <&l4ls_gclk>;
-					clock-names = "fck";
-					status = "disabled";
-				};
-
-				ehrpwm0: pwm@200 {
-					compatible = "ti,am4372-ehrpwm",
-						     "ti,am3352-ehrpwm";
-					#pwm-cells = <3>;
-					reg = <0x200 0x80>;
-					clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
-					clock-names = "tbclk", "fck";
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@2000 {			/* 0x48302000, ap 58 4a.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x2000 0x4>,
-			      <0x2004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2000 0x1000>;
-
-			epwmss1: epwmss@0 {
-				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-				reg = <0x0 0x10>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x1000>;
-				status = "disabled";
-
-				ecap1: pwm@100 {
-					compatible = "ti,am4372-ecap",
-						     "ti,am3352-ecap";
-					#pwm-cells = <3>;
-					reg = <0x100 0x80>;
-					clocks = <&l4ls_gclk>;
-					clock-names = "fck";
-					status = "disabled";
-				};
-
-				ehrpwm1: pwm@200 {
-					compatible = "ti,am4372-ehrpwm",
-						     "ti,am3352-ehrpwm";
-					#pwm-cells = <3>;
-					reg = <0x200 0x80>;
-					clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
-					clock-names = "tbclk", "fck";
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@4000 {			/* 0x48304000, ap 60 44.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x4000 0x4>,
-			      <0x4004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-
-			epwmss2: epwmss@0 {
-				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-				reg = <0x0 0x10>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x1000>;
-				status = "disabled";
-
-				ecap2: pwm@100 {
-					compatible = "ti,am4372-ecap",
-						     "ti,am3352-ecap";
-					#pwm-cells = <3>;
-					reg = <0x100 0x80>;
-					clocks = <&l4ls_gclk>;
-					clock-names = "fck";
-					status = "disabled";
-				};
-
-				ehrpwm2: pwm@200 {
-					compatible = "ti,am4372-ehrpwm",
-						     "ti,am3352-ehrpwm";
-					#pwm-cells = <3>;
-					reg = <0x200 0x80>;
-					clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
-					clock-names = "tbclk", "fck";
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@6000 {			/* 0x48306000, ap 96 58.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x6000 0x4>,
-			      <0x6004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6000 0x1000>;
-
-			epwmss3: epwmss@0 {
-				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-				reg = <0x0 0x10>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x1000>;
-				status = "disabled";
-
-				ehrpwm3: pwm@200 {
-					compatible = "ti,am4372-ehrpwm",
-						     "ti,am3352-ehrpwm";
-					#pwm-cells = <3>;
-					reg = <0x200 0x80>;
-					clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
-					clock-names = "tbclk", "fck";
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@8000 {			/* 0x48308000, ap 98 54.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x8000 0x4>,
-			      <0x8004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8000 0x1000>;
-
-			epwmss4: epwmss@0 {
-				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-				reg = <0x0 0x10>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x1000>;
-				status = "disabled";
-
-				ehrpwm4: pwm@48308200 {
-					compatible = "ti,am4372-ehrpwm",
-						     "ti,am3352-ehrpwm";
-					#pwm-cells = <3>;
-					reg = <0x200 0x80>;
-					clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
-					clock-names = "tbclk", "fck";
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@a000 {			/* 0x4830a000, ap 100 60.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xa000 0x4>,
-			      <0xa004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa000 0x1000>;
-
-			epwmss5: epwmss@0 {
-				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-				reg = <0x0 0x10>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x1000>;
-				status = "disabled";
-
-				ehrpwm5: pwm@200 {
-					compatible = "ti,am4372-ehrpwm",
-						     "ti,am3352-ehrpwm";
-					#pwm-cells = <3>;
-					reg = <0x200 0x80>;
-					clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
-					clock-names = "tbclk", "fck";
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@10000 {			/* 0x48310000, ap 64 4e.1 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x11fe0 0x4>,
-			      <0x11fe4 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_RNG_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x10000 0x2000>;
-
-			rng: rng@0 {
-				compatible = "ti,omap4-rng";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@13000 {			/* 0x48313000, ap 90 50.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x13000 0x1000>;
-		};
-
-		target-module@18000 {			/* 0x48318000, ap 62 4c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x18000 0x4000>;
-		};
-
-		target-module@20000 {			/* 0x48320000, ap 82 34.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x20000 0x4>,
-			      <0x20010 0x4>,
-			      <0x20114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO5_CLKCTRL 0>,
-				 <&l4ls_clkctrl AM4_L4LS_GPIO5_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x20000 0x1000>;
-
-			gpio4: gpio@0 {
-				compatible = "ti,am4372-gpio","ti,omap4-gpio";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-		};
-
-		gpio5_target: target-module@22000 {		/* 0x48322000, ap 116 64.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x22000 0x4>,
-			      <0x22010 0x4>,
-			      <0x22114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO6_CLKCTRL 0>,
-				 <&l4ls_clkctrl AM4_L4LS_GPIO6_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x22000 0x1000>;
-
-			gpio5: gpio@0 {
-				compatible = "ti,am4372-gpio","ti,omap4-gpio";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-		};
-
-		target-module@26000 {			/* 0x48326000, ap 86 66.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x26000 0x4>,
-			      <0x26104 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): per_pwrdm, l3s_clkdm */
-			clocks = <&l3s_clkctrl AM4_L3S_VPFE0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x26000 0x1000>;
-
-			vpfe0: vpfe@0 {
-				compatible = "ti,am437x-vpfe";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@28000 {			/* 0x48328000, ap 75 0e.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x28000 0x4>,
-			      <0x28104 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): per_pwrdm, l3s_clkdm */
-			clocks = <&l3s_clkctrl AM4_L3S_VPFE1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x28000 0x1000>;
-
-			vpfe1: vpfe@0 {
-				compatible = "ti,am437x-vpfe";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@2a000 {			/* 0x4832a000, ap 88 3c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x2a000 0x4>,
-			      <0x2a010 0x4>,
-			      <0x2a014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, dss_clkdm */
-			clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x0002a000 0x00000400>,
-				 <0x00000400 0x0002a400 0x00000400>,
-				 <0x00000800 0x0002a800 0x00000400>,
-				 <0x00000c00 0x0002ac00 0x00000400>,
-				 <0x00001000 0x0002b000 0x00001000>;
-
-			dss: dss@0 {
-				compatible = "ti,omap3-dss";
-				reg = <0 0x200>;
-				status = "disabled";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x00000000 0x00000000 0x00000400>,
-					 <0x00000400 0x00000400 0x00000400>,
-					 <0x00000800 0x00000800 0x00000400>,
-					 <0x00000c00 0x00000c00 0x00000400>,
-					 <0x00001000 0x00001000 0x00001000>;
-
-				target-module@400 {
-					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x400 0x4>,
-					      <0x410 0x4>,
-					      <0x414 0x4>;
-					reg-names = "rev", "sysc", "syss";
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-midle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-							 SYSC_OMAP2_ENAWAKEUP |
-							 SYSC_OMAP2_SOFTRESET |
-							 SYSC_OMAP2_AUTOIDLE)>;
-					ti,syss-mask = <1>;
-					clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
-					clock-names = "fck";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x400 0x400>;
-
-					dispc: dispc@0 {
-						compatible = "ti,omap3-dispc";
-						reg = <0 0x400>;
-						interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-						clocks = <&disp_clk>;
-						clock-names = "fck";
-
-						max-memory-bandwidth = <230000000>;
-					};
-				};
-
-				target-module@800 {
-					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x800 0x4>,
-					      <0x810 0x4>,
-					      <0x814 0x4>;
-					reg-names = "rev", "sysc", "syss";
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-							 SYSC_OMAP2_AUTOIDLE)>;
-					ti,syss-mask = <1>;
-					clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
-					clock-names = "fck";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x800 0x400>;
-
-					rfbi: rfbi@0 {
-						compatible = "ti,omap3-rfbi";
-						reg = <0 0x100>;
-						clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
-						clock-names = "fck";
-						status = "disabled";
-					};
-				};
-			};
-		};
-
-		target-module@3d000 {			/* 0x4833d000, ap 102 6e.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x3d000 0x4>,
-			      <0x3d010 0x4>,
-			      <0x3d014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER9_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3d000 0x1000>;
-
-			timer9: timer@0 {
-				compatible = "ti,am4372-timer","ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@3f000 {			/* 0x4833f000, ap 104 5c.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x3f000 0x4>,
-			      <0x3f010 0x4>,
-			      <0x3f014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER10_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3f000 0x1000>;
-
-			timer10: timer@0 {
-				compatible = "ti,am4372-timer","ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@41000 {			/* 0x48341000, ap 106 76.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x41000 0x4>,
-			      <0x41010 0x4>,
-			      <0x41014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER11_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x41000 0x1000>;
-
-			timer11: timer@0 {
-				compatible = "ti,am4372-timer","ti,am335x-timer";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@45000 {			/* 0x48345000, ap 108 6a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x45000 0x4>,
-			      <0x45110 0x4>,
-			      <0x45114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_SPI4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x45000 0x1000>;
-
-			spi4: spi@0 {
-				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		target-module@47000 {			/* 0x48347000, ap 110 70.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x47000 0x4>,
-			      <0x47014 0x4>,
-			      <0x47018 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_HDQ1W_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x47000 0x1000>;
-
-			hdq: hdq@0 {
-				compatible = "ti,am4372-hdq";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&func_12m_clk>;
-				clock-names = "fck";
-				status = "disabled";
-			};
-		};
-
-		target-module@4c000 {			/* 0x4834c000, ap 114 72.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x4c000 0x4>,
-			      <0x4c010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&l3s_clkctrl AM4_L3S_ADC1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4c000 0x2000>;
-
-			magadc: magadc@0 {
-				compatible = "ti,am4372-magadc";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&adc_mag_fck>;
-				clock-names = "fck";
-				dmas = <&edma 54 0>, <&edma 55 0>;
-				dma-names = "fifo0", "fifo1";
-				status = "disabled";
-
-				mag {
-					compatible = "ti,am4372-mag";
-				};
-
-				adc {
-					#io-channel-cells = <1>;
-					compatible = "ti,am4372-adc";
-				};
-			};
-		};
-
-		target-module@80000 {			/* 0x48380000, ap 123 42.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x80000 0x4>,
-			      <0x80010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l3s_clkdm */
-			clocks = <&l3s_clkctrl AM4_L3S_USB_OTG_SS0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x80000 0x20000>;
-
-			dwc3_1: omap_dwc3@0 {
-				compatible = "ti,am437x-dwc3";
-				reg = <0x0 0x10000>;
-				interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				utmi-mode = <1>;
-				ranges = <0 0 0x20000>;
-
-				usb1: usb@10000 {
-					compatible = "snps,dwc3";
-					reg = <0x10000 0x10000>;
-					interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "peripheral",
-							  "host",
-							  "otg";
-					phys = <&usb2_phy1>;
-					phy-names = "usb2-phy";
-					maximum-speed = "high-speed";
-					dr_mode = "otg";
-					status = "disabled";
-					snps,dis_u3_susphy_quirk;
-					snps,dis_u2_susphy_quirk;
-				};
-			};
-		};
-
-		target-module@a8000 {			/* 0x483a8000, ap 125 6c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xa8000 0x4>;
-			reg-names = "rev";
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_OCP2SCP0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa8000 0x8000>;
-
-			ocp2scp0: ocp2scp@0 {
-				compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x8000>;
-
-				usb2_phy1: phy@8000 {
-					compatible = "ti,am437x-usb2";
-					reg = <0x0 0x8000>;
-					syscon-phy-power = <&scm_conf 0x620>;
-					clocks = <&usb_phy0_always_on_clk32k>,
-						 <&l3s_clkctrl AM4_L3S_USB_OTG_SS0_CLKCTRL 8>;
-					clock-names = "wkupclk", "refclk";
-					#phy-cells = <0>;
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@c0000 {			/* 0x483c0000, ap 127 7a.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xc0000 0x4>,
-			      <0xc0010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): per_pwrdm, l3s_clkdm */
-			clocks = <&l3s_clkctrl AM4_L3S_USB_OTG_SS1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc0000 0x20000>;
-
-			dwc3_2: omap_dwc3@0 {
-				compatible = "ti,am437x-dwc3";
-				reg = <0x0 0x10000>;
-				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				utmi-mode = <1>;
-				ranges = <0 0 0x20000>;
-
-				usb2: usb@10000 {
-					compatible = "snps,dwc3";
-					reg = <0x10000 0x10000>;
-					interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "peripheral",
-							  "host",
-							  "otg";
-					phys = <&usb2_phy2>;
-					phy-names = "usb2-phy";
-					maximum-speed = "high-speed";
-					dr_mode = "otg";
-					status = "disabled";
-					snps,dis_u3_susphy_quirk;
-					snps,dis_u2_susphy_quirk;
-				};
-			};
-		};
-
-		target-module@e8000 {			/* 0x483e8000, ap 129 78.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xe8000 0x4>;
-			reg-names = "rev";
-			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_OCP2SCP1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xe8000 0x8000>;
-
-			ocp2scp1: ocp2scp@0 {
-				compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x8000>;
-
-				usb2_phy2: phy@8000 {
-					compatible = "ti,am437x-usb2";
-					reg = <0x0 0x8000>;
-					syscon-phy-power = <&scm_conf 0x628>;
-					clocks = <&usb_phy1_always_on_clk32k>,
-						 <&l3s_clkctrl AM4_L3S_USB_OTG_SS1_CLKCTRL 8>;
-					clock-names = "wkupclk", "refclk";
-					#phy-cells = <0>;
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@f2000 {			/* 0x483f2000, ap 112 5a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xf2000 0x2000>;
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts
deleted file mode 100644
index 8ea3780f939de..0000000000000
--- a/arch/arm/boot/dts/am437x-sbc-t43.dts
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
- */
-
-#include "am437x-cm-t43.dts"
-#include "compulab-sb-som.dtsi"
-
-/ {
-	model = "CompuLab CM-T43 on SB-SOM-T43";
-	compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-};
-
-&am43xx_pinmux {
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			AM4372_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			AM4372_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			AM4372_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			AM4372_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			AM4372_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-			AM4372_IOPAD(0x964, PIN_INPUT | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */
-		>;
-	};
-
-	dss_pinctrl_default: dss_pinctrl_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam0 hd -> DSS DATA 23 */
-			AM4372_IOPAD(0x9b4, PIN_OUTPUT_PULLUP | MUX_MODE2)
-			AM4372_IOPAD(0x9b8, PIN_OUTPUT_PULLUP | MUX_MODE2)
-			AM4372_IOPAD(0x9bc, PIN_OUTPUT_PULLUP | MUX_MODE2)
-			AM4372_IOPAD(0x9c0, PIN_OUTPUT_PULLUP | MUX_MODE2)
-			AM4372_IOPAD(0x9c4, PIN_OUTPUT_PULLUP | MUX_MODE2)
-			AM4372_IOPAD(0x9c8, PIN_OUTPUT_PULLUP | MUX_MODE2)
-			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam1 data 9 -> DSS DATA 16 */
-
-			AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-			AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-			AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-			AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-			AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-			AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
-			AM4372_IOPAD(0xa20, PIN_OUTPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-
-	uart0_pins_default: uart0_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
-			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
-			AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
-			AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
-		>;
-	};
-
-	i2c1_pins: i2c1_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0xa6c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1)  /* spi2_cs0.i2c1_sda  */
-			AM4372_IOPAD(0xa60, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1)  /* spi2_sclk.i2c1_scl */
-		>;
-	};
-
-	i2c2_pins: i2c2_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3)  /* uart1_ctsn.i2c2_sda  */
-			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3)  /* uart1_rtsn.i2c2_scl */
-		>;
-	};
-
-	usb2_phy1_default: usb2_phy1_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
-		>;
-	};
-
-	usb2_phy2_default: usb2_phy2_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
-		>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	pca9555: pca9555@20 {
-		compatible = "nxp,pca9555";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	eeprom_base: at24@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-};
-
-&mmc1 {
-	status = "okay";
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vsb_3v3>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pinctrl_default>;
-
-	port {
-		dpi_lcd_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_default>;
-};
-
-&dwc3_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_phy1_default>;
-};
-
-&dwc3_2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_phy2_default>;
-};
-
-&lcd0 {
-	enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
-			&gpio4 28 GPIO_ACTIVE_HIGH>;
-
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&dpi_lcd_out>;
-			data-lines = <24>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
deleted file mode 100644
index 511a02e13e2c9..0000000000000
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ /dev/null
@@ -1,902 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/* AM437x SK EVM */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM437x SK EVM";
-	compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	/* fixed 32k external oscillator clock */
-	clk_32k_rtc: clk_32k_rtc {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	lcd_bl: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "AM437x-SK-EVM";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Headphone Jack",	"HPLOUT",
-			"Headphone Jack",	"HPROUT",
-			"LINE1L",		"Line In",
-			"LINE1R",		"Line In";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound_master>;
-		simple-audio-card,frame-master = <&sound_master>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp1>;
-		};
-
-		sound_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			system-clock-frequency = <24000000>;
-		};
-	};
-
-	matrix_keypad: matrix_keypad0 {
-		compatible = "gpio-matrix-keypad";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&matrix_keypad_pins>;
-
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <5>;
-
-		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
-				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
-
-		col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH		/* Bank5, pin13 */
-				&gpio5 4 GPIO_ACTIVE_HIGH>;	/* Bank5, pin4 */
-
-		linux,keymap = <
-				MATRIX_KEY(0, 0, KEY_DOWN)
-				MATRIX_KEY(0, 1, KEY_RIGHT)
-				MATRIX_KEY(1, 0, KEY_LEFT)
-				MATRIX_KEY(1, 1, KEY_UP)
-			>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-
-		led0 {
-			label = "am437x-sk:red:heartbeat";
-			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led1 {
-			label = "am437x-sk:green:mmc1";
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led2 {
-			label = "am437x-sk:blue:cpu0";
-			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led3 {
-			label = "am437x-sk:blue:usr3";
-			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
-			default-state = "off";
-		};
-	};
-
-	lcd0: display {
-		compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		backlight = <&lcd_bl>;
-
-		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	vmmcwl_fixed: fixedregulator-mmcwl {
-		/*
-		 * WL_EN is not SDIO standard compliant. It is an out of band
-		 * signal and hard to be dealt with in a standard way by the
-		 * SDIO core driver.
-		 * So modelling the WL_EN line as a regulator was a natural
-		 * choice as the MMC core already deals with MMC supplies.
-		 */
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcwl_fixed";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&am43xx_pinmux {
-	matrix_keypad_pins: matrix_keypad_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
-			AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
-			AM4372_IOPAD(0xa54, PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
-			AM4372_IOPAD(0xa58, PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
-		>;
-	};
-
-	leds_pins: leds_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
-			AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
-			AM4372_IOPAD(0xa30, PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
-			AM4372_IOPAD(0xa34, PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
-		>;
-	};
-
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: i2c1_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			AM4372_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			AM4372_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
-		>;
-	};
-
-	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-			AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
-		>;
-	};
-
-	vpfe0_pins_default: vpfe0_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
-			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
-			AM4372_IOPAD(0x9b8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
-			AM4372_IOPAD(0x9bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
-			AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
-			AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
-			AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
-			AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
-			AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
-			AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
-			AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
-			AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
-			AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
-			AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
-			AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
-		>;
-	};
-
-	vpfe0_pins_sleep: vpfe0_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0x9b8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0x9bc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-		>;
-	};
-
-	clkout1_pin: pinmux_clkout1_pin {
-		pinctrl-single,pins = <
-			0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* XDMA_EVENT_INTR0/CLKOUT1 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			AM4372_IOPAD(0x914, PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			AM4372_IOPAD(0x928, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			AM4372_IOPAD(0x924, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			AM4372_IOPAD(0x920, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			AM4372_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			AM4372_IOPAD(0x930, PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			AM4372_IOPAD(0x918, PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			AM4372_IOPAD(0x940, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			AM4372_IOPAD(0x93c, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			AM4372_IOPAD(0x938, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			AM4372_IOPAD(0x934, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
-
-			/* Slave 2 */
-			AM4372_IOPAD(0x858, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
-			AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-			AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-			/* Slave 2 reset value */
-			AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			AM4372_IOPAD(0x94c, PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	dss_pins: dss_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
-			AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
-			AM4372_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
-			AM4372_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
-			AM4372_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
-			AM4372_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
-			AM4372_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
-			AM4372_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
-			AM4372_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
-			AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
-			AM4372_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
-			AM4372_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
-			AM4372_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
-			AM4372_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
-			AM4372_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */
-
-		>;
-	};
-
-	qspi_pins: qspi_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
-			AM4372_IOPAD(0x890, PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			AM4372_IOPAD(0x894, PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			AM4372_IOPAD(0x898, PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			AM4372_IOPAD(0x89c, PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
-		>;
-	};
-
-	mcasp1_pins: mcasp1_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
-			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
-			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
-			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-
-	mcasp1_pins_sleep: mcasp1_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	lcd_pins: lcd_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
-		>;
-	};
-
-	usb1_pins: usb1_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
-		>;
-	};
-
-	usb2_pins: usb2_pins {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
-		>;
-	};
-
-	mmc3_pins_default: pinmux_mmc3_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */
-			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */
-			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD22) cam1_data4.mmc2_dat0 */
-			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE23) cam1_data5.mmc2_dat1 */
-			AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD23) cam1_data6.mmc2_dat2 */
-			AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE24) cam1_data7.mmc2_dat3 */
-		>;
-	};
-
-	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */
-			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */
-			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD22) cam1_data4.mmc2_dat0 */
-			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE23) cam1_data5.mmc2_dat1 */
-			AM4372_IOPAD(0xa00, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD23) cam1_data6.mmc2_dat2 */
-			AM4372_IOPAD(0xa04, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE24) cam1_data7.mmc2_dat3 */
-		>;
-	};
-
-	wlan_pins_default: pinmux_wlan_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* cam1_data8.gpio4_8 WL_EN */
-			AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* cam1_wen.gpio4_13 WL_IRQ */
-		>;
-	};
-
-	wlan_pins_sleep: pinmux_wlan_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* cam1_data8.gpio4_8 WL_EN */
-			AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* cam1_wen.gpio4_13 WL_IRQ */
-		>;
-	};
-
-	uart1_bt_pins_default: pinmux_uart1_bt_pins_default {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0)		/* uart1_rxd.uart1_rxd */
-			AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
-			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
-			AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* cam1_data9.gpio4_7 BT_EN */
-		>;
-	};
-
-	uart1_bt_pins_sleep: pinmux_uart1_bt_pins_sleep {
-		pinctrl-single,pins = <
-			AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_rxd.uart1_rxd */
-			AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_txd.uart1_txd */
-			AM4372_IOPAD(0x978, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_ctsn.uart1_ctsn */
-			AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_rtsn.uart1_rtsn */
-			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* cam1_data9.gpio4_7 BT_EN */
-		>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <100000>;
-
-	tps@24 {
-		compatible = "ti,tps65218";
-		reg = <0x24>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			/* VDD_CORE limits min of OPP50 and max of OPP100 */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			regulator-name = "vdds_ddr";
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-state-mem {
-				regulator-on-in-suspend;
-			};
-			regulator-state-disk {
-				regulator-off-in-suspend;
-			};
-		};
-
-		dcdc4: regulator-dcdc4 {
-			regulator-name = "v3_3d";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
-			regulator-name = "v1_0bat";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-state-mem {
-				regulator-on-in-suspend;
-			};
-		};
-
-		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
-			regulator-name = "v1_8bat";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-state-mem {
-				regulator-on-in-suspend;
-			};
-		};
-
-		ldo1: regulator-ldo1 {
-			regulator-name = "v1_8d";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		power-button {
-			compatible = "ti,tps65218-pwrbutton";
-			status = "okay";
-			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
-		};
-	};
-
-	at24@50 {
-		compatible = "atmel,24c256";
-		pagesize = <64>;
-		reg = <0x50>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-
-	ov2659@30 {
-		compatible = "ovti,ov2659";
-		reg = <0x30>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&clkout1_pin>;
-
-		clocks = <&clkout1_mux_ck>;
-		clock-names = "xvclk";
-		assigned-clocks = <&clkout1_mux_ck>;
-		assigned-clock-parents = <&clkout1_osc_div_ck>;
-
-		port {
-			ov2659_1: endpoint {
-				remote-endpoint = <&vpfe0_ep>;
-				link-frequencies = /bits/ 64 <70000000>;
-			};
-		};
-	};
-
-	edt-ft5306@38 {
-		status = "okay";
-		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
-		pinctrl-names = "default";
-		pinctrl-0 = <&edt_ft5306_ts_pins>;
-
-		reg = <0x38>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-
-		reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <272>;
-
-		wakeup-source;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&dcdc4>;
-		IOVDD-supply = <&dcdc4>;
-		DRVDD-supply = <&dcdc4>;
-		DVDD-supply = <&ldo1>;
-	};
-
-	lis331dlh@18 {
-		compatible = "st,lis331dlh";
-		reg = <0x18>;
-		status = "okay";
-
-		Vdd-supply = <&dcdc4>;
-		Vdd_IO-supply = <&dcdc4>;
-		interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins>;
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio4 {
-	status = "okay";
-};
-
-&gpio5 {
-	status = "okay";
-};
-
-&mmc1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-
-	vmmc-supply = <&dcdc4>;
-	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&uart1_bt_pins_default>;
-	pinctrl-1 = <&uart1_bt_pins_sleep>;
-};
-
-&mmc3 {
-	status = "okay";
-	/*
-	 * these are on the crossbar and are outlined in the
-	 * xbar-event-map element
-	 */
-	dmas = <&edma_xbar 30 0 1>,
-		<&edma_xbar 31 0 2>;
-	dma-names = "tx", "rx";
-	vmmc-supply = <&vmmcwl_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mmc3_pins_default>;
-	pinctrl-1 = <&mmc3_pins_sleep>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	non-removable;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&wlan_pins_default>;
-		pinctrl-1 = <&wlan_pins_sleep>;
-		reg = <2>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "otg";
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-};
-
-&usb2_phy2 {
-	status = "okay";
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_pins>;
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_pins>;
-
-	spi-max-frequency = <48000000>;
-	flash@0 {
-		compatible = "mx66l51235l";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpol;
-		spi-cpha;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first 512KiB
-		 * for a valid file to boot(XIP).
-		 */
-		partition@0 {
-			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x00080000>;
-		};
-		partition@1 {
-			label = "QSPI.U_BOOT.backup";
-			reg = <0x00080000 0x00080000>;
-		};
-		partition@2 {
-			label = "QSPI.U-BOOT-SPL_OS";
-			reg = <0x00100000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.U_BOOT_ENV";
-			reg = <0x00110000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.U-BOOT-ENV.backup";
-			reg = <0x00120000 0x00010000>;
-		};
-		partition@5 {
-			label = "QSPI.KERNEL";
-			reg = <0x00130000 0x0800000>;
-		};
-		partition@6 {
-			label = "QSPI.FILESYSTEM";
-			reg = <0x00930000 0x36D0000>;
-		};
-	};
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	ethphy0: ethernet-phy@4 {
-		reg = <4>;
-	};
-
-	ethphy1: ethernet-phy@5 {
-		reg = <5>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-rxid";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-rxid";
-	ti,dual-emac-pvid = <2>;
-};
-
-&elm {
-	status = "okay";
-};
-
-&mcasp1 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp1_pins>;
-	pinctrl-1 = <&mcasp1_pins_sleep>;
-
-	status = "okay";
-
-	op-mode = <0>;
-	tdm-slots = <2>;
-	serial-dir = <
-		0 0 1 2
-	>;
-
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pins>;
-
-	port {
-		dpi_out: endpoint@0 {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&rtc {
-	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
-	clock-names = "ext-clk", "int-clk";
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
-
-&cpu {
-	cpu0-supply = <&dcdc2>;
-};
-
-&vpfe0 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&vpfe0_pins_default>;
-	pinctrl-1 = <&vpfe0_pins_sleep>;
-
-	/* Camera port */
-	port {
-		vpfe0_ep: endpoint {
-			remote-endpoint = <&ov2659_1>;
-			ti,am437x-vpfe-interface = <0>;
-			bus-width = <8>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-		};
-	};
-};
-
-&wkup_m3_ipc {
-	firmware-name = "am43x-evm-scale-data.bin";
-};
-
-&pruss1_mdio {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
deleted file mode 100644
index 9fc915a2582e2..0000000000000
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ /dev/null
@@ -1,1028 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/* AM43x EPOS EVM */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/sound/tlv320aic31xx.h>
-
-/ {
-	model = "TI AM43x EPOS EVM";
-	compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	vmmcsd_fixed: fixedregulator-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lcd0: display {
-		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
-		label = "lcd";
-
-		backlight = <&lcd_bl>;
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	matrix_keypad: matrix_keypad0 {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&matrix_keypad_default>;
-		pinctrl-1 = <&matrix_keypad_sleep>;
-		wakeup-source;
-
-		row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
-			     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
-			     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
-			     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
-
-		col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
-			     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
-			     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
-			     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
-
-		linux,keymap = <0x00000201	/* P1 */
-			0x01000204	/* P4 */
-			0x02000207	/* P7 */
-			0x0300020a	/* NUMERIC_STAR */
-			0x00010202	/* P2 */
-			0x01010205	/* P5 */
-			0x02010208	/* P8 */
-			0x03010200	/* P0 */
-			0x00020203	/* P3 */
-			0x01020206	/* P6 */
-			0x02020209	/* P9 */
-			0x0302020b	/* NUMERIC_POUND */
-			0x00030067	/* UP */
-			0x0103006a	/* RIGHT */
-			0x0203006c	/* DOWN */
-			0x03030069>;	/* LEFT */
-	};
-
-	lcd_bl: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	sound0: sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "AM43-EPOS-EVM";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker";
-		simple-audio-card,routing =
-			"MIC1LP", "Microphone Jack",
-			"MIC1RP", "Microphone Jack",
-			"MIC1LP", "MICBIAS",
-			"MIC1RP", "MICBIAS",
-			"Headphone Jack", "HPL",
-			"Headphone Jack", "HPR",
-			"Speaker", "SPL",
-			"Speaker", "SPR";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound0_master>;
-		simple-audio-card,frame-master = <&sound0_master>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp1>;
-			system-clock-frequency = <12000000>;
-		};
-
-		sound0_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3111>;
-			system-clock-frequency = <12000000>;
-		};
-	};
-
-	audio_mstrclk: clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-	};
-};
-
-&am43xx_pinmux {
-		pinctrl-names = "default";
-		pinctrl-0 = <&unused_pins>;
-
-		unused_pins: unused_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x848, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x850, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x858, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x860, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x864, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x868, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x86c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x878, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x908, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x91c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x920, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x9e0, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA0c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA38, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA3c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA40, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA44, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA48, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA4c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA50, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA54, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA58, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA5c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA60, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA64, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0xA68, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA6C, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA74, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0xA78, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
-				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-				AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
-				AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-				AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		nand_flash_x8_default: nand_flash_x8_default {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
-				AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-				AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-				AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-				AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-				AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-				AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-				AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-				AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-				AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-				AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-				AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-				AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-				AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-				AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-				AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-			>;
-		};
-
-		nand_flash_x8_sleep: nand_flash_x8_sleep {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x840, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x800, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x804, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x808, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x80c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x810, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x814, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x818, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x81c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x870, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x874, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-			>;
-		};
-
-		ecap0_pins_default: backlight_pins_default {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x964, MUX_MODE0)         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-			>;
-		};
-
-		ecap0_pins_sleep: backlight_pins_sleep {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x964, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-			>;
-		};
-
-		i2c2_pins: pinmux_i2c2_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
-				AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
-			>;
-		};
-
-		spi0_pins_default: pinmux_spi0_pins_default {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
-				AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
-				AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
-				AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
-			>;
-		};
-
-		spi0_pins_sleep: pinmux_spi0_pins_sleep {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x950, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x954, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x958, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x95c, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
-			>;
-		};
-
-		spi1_pins_default: pinmux_spi1_pins_default {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
-				AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
-				AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
-				AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
-			>;
-		};
-
-		spi1_pins_sleep: pinmux_spi1_pins_sleep {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x990, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x994, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x998, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x99c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		mmc1_pins_default: pinmux_mmc1_pins_default {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-			>;
-		};
-
-		mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x960, DS0_PIN_OUTPUT_PULLUP | PIN_INPUT | MUX_MODE7)
-			>;
-		};
-
-		matrix_keypad_default: matrix_keypad_default {
-			pinctrl-single,pins = <
-				 AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7)          /* mii1_tx_clk.gpio3_9 */
-				 AM4372_IOPAD(0x930, PIN_OUTPUT | MUX_MODE7)          /* mii1_rx_clk.gpio3_10 */
-				 AM4372_IOPAD(0x934, PIN_OUTPUT | MUX_MODE7)          /* mii1_rxd3.gpio2_18 */
-				 AM4372_IOPAD(0x938, PIN_OUTPUT | MUX_MODE7)          /* mii1_rxd2.gpio2_19 */
-				 AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_ctsn.gpio0_12 */
-				 AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_rtsn.gpio0_13 */
-				 AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_rxd.gpio0_14 */
-				 AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_txd.gpio0_15 */
-			>;
-		};
-
-		matrix_keypad_sleep: matrix_keypad_sleep {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		qspi1_pins_default: qspi1_pins_default {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
-				AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
-				AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)
-				AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)
-				AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)
-				AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)
-			>;
-		};
-
-		qspi1_pins_sleep: qspi1_pins_sleep {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x888, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-				AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
-			>;
-		};
-
-		pixcir_ts_pins_default: pixcir_ts_pins_default {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
-			>;
-		};
-
-		pixcir_ts_pins_sleep: pixcir_ts_pins_sleep {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x844, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
-			>;
-		};
-
-		hdq_pins: pinmux_hdq_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
-			>;
-		};
-
-		dss_pins: dss_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-				AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
-				AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
-				AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
-				AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
-				AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
-				AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
-				AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-				AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-				AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-				AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-				AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-				AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-				AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
-			>;
-		};
-
-		display_mux_pins: display_mux_pins {
-			pinctrl-single,pins = <
-				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
-				AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
-			>;
-		};
-
-		vpfe1_pins_default: vpfe1_pins_default {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
-				AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
-				AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
-				AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
-				AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
-				AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
-				AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
-				AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
-				AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
-				AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
-				AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
-				AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
-				AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
-			>;
-		};
-
-		vpfe1_pins_sleep: vpfe1_pins_sleep {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			>;
-		};
-
-		uart0_pins_default: uart0_pins_default {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
-				AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
-				AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-				AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-			>;
-		};
-
-		uart0_pins_sleep: uart0_pins_sleep {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
-				AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
-			>;
-		};
-
-		usb2_phy1_default: usb2_phy1_default {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0xac0, PIN_INPUT_PULLDOWN | MUX_MODE0)
-			>;
-		};
-
-		usb2_phy1_sleep: usb2_phy1_sleep {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		usb2_phy2_default: usb2_phy2_default {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0xac4, PIN_INPUT_PULLDOWN | MUX_MODE0)
-			>;
-		};
-
-		usb2_phy2_sleep: usb2_phy2_sleep {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		mcasp1_pins: mcasp1_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
-				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
-				AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
-				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
-			>;
-		};
-
-		mcasp1_sleep_pins: mcasp1_sleep_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_sleep>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&mac_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	ethphy0: ethernet-phy@16 {
-		reg = <16>;
-	};
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rmii";
-	phys = <&phy_gmii_sel 1 1>;
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <100000>;
-
-	tps65218: tps65218@24 {
-		reg = <0x24>;
-		compatible = "ti,tps65218";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			regulator-name = "vdcdc3";
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-state-mem {
-				regulator-on-in-suspend;
-			};
-			regulator-state-disk {
-				regulator-off-in-suspend;
-			};
-		};
-
-		dcdc4: regulator-dcdc4 {
-			regulator-name = "vdcdc4";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc5: regulator-dcdc5 {
-			regulator-name = "v1_0bat";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc6: regulator-dcdc6 {
-			regulator-name = "v1_8bat";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1: regulator-ldo1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-
-	at24@50 {
-		compatible = "atmel,24c256";
-		pagesize = <64>;
-		reg = <0x50>;
-	};
-
-	pixcir_ts@5c {
-		compatible = "pixcir,pixcir_tangoc";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&pixcir_ts_pins_default>;
-		pinctrl-1 = <&pixcir_ts_pins_sleep>;
-
-		reg = <0x5c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
-
-		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-
-		touchscreen-size-x = <1024>;
-		touchscreen-size-y = <600>;
-	};
-
-	tlv320aic3111: tlv320aic3111@18 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3111";
-		reg = <0x18>;
-		status = "okay";
-
-		ai31xx-micbias-vg = <MICBIAS_2_0V>;
-
-		/* Regulators */
-		HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
-		SPRVDD-supply = <&vbat>; /* vbat */
-		SPLVDD-supply = <&vbat>; /* vbat */
-		AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
-		IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
-		DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
-	};
-
-	ov2659@30 {
-		compatible = "ovti,ov2659";
-		reg = <0x30>;
-
-		clocks = <&audio_mstrclk>;
-		clock-names = "xvclk";
-
-		port {
-			ov2659_1: endpoint {
-				remote-endpoint = <&vpfe1_ep>;
-				link-frequencies = /bits/ 64 <70000000>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	status = "okay";
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&display_mux_pins>;
-	status = "okay";
-
-	sel-lcd-hdmi-hog {
-		/*
-		 * SelLCDorHDMI selects between display and audio paths:
-		 * Low: HDMI display with audio via HDMI
-		 * High: LCD display with analog audio via aic3111 codec
-		 */
-		gpio-hog;
-		gpios = <1 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "SelLCDorHDMI";
-	};
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";	/* Disable QSPI when enabling GPMC (NAND) */
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&nand_flash_x8_default>;
-	pinctrl-1 = <&nand_flash_x8_sleep>;
-	ranges = <0 0 0x08000000 0x01000000>;	/* CS0 space. Min partition = 16MB */
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
-		ti,nand-xfer-type = "prefetch-dma";
-		ti,nand-ecc-opt = "bch16";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
-		gpmc,cs-wr-off-ns = <40>;
-		gpmc,adv-on-ns = <0>;  /* cs-on-ns */
-		gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
-		gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
-		gpmc,we-on-ns = <0>;   /* cs-on-ns */
-		gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
-		gpmc,oe-on-ns = <3>;  /* cs-on-ns + tRR + 2 */
-		gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
-		gpmc,access-ns = <30>; /* tCEA + 4*/
-		gpmc,rd-cycle-ns = <40>;
-		gpmc,wr-cycle-ns = <40>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x00040000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00040000 0x00040000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x000C0000 0x00040000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00100000 0x00080000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x00180000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x00280000 0x00040000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x002C0000 0x00040000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00300000 0x00700000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x1f600000>;
-		};
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&rtc_target {
-	status = "disabled";
-};
-
-&tscadc {
-	status = "okay";
-
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6 7>;
-	};
-};
-
-&ecap0 {
-		status = "okay";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&ecap0_pins_default>;
-		pinctrl-1 = <&ecap0_pins_sleep>;
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&spi0_pins_default>;
-	pinctrl-1 = <&spi0_pins_sleep>;
-	ti,pindir-d0-out-d1-in;
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&spi1_pins_default>;
-	pinctrl-1 = <&spi1_pins_sleep>;
-	ti,pindir-d0-out-d1-in;
-};
-
-&usb2_phy1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&usb2_phy1_default>;
-	pinctrl-1 = <&usb2_phy1_sleep>;
-};
-
-&usb1 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usb2_phy2 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&usb2_phy2_default>;
-	pinctrl-1 = <&usb2_phy2_sleep>;
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&qspi {
-	status = "disabled";	/* Disable GPMC (NAND) when enabling QSPI */
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi1_pins_default>;
-	pinctrl-1 = <&qspi1_pins_sleep>;
-
-	spi-max-frequency = <48000000>;
-	flash@0 {
-		compatible = "mx66l51235l";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpol;
-		spi-cpha;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first 512KiB
-		 * for a valid file to boot(XIP).
-		 */
-		partition@0 {
-			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x00080000>;
-		};
-		partition@1 {
-			label = "QSPI.U_BOOT.backup";
-			reg = <0x00080000 0x00080000>;
-		};
-		partition@2 {
-			label = "QSPI.U-BOOT-SPL_OS";
-			reg = <0x00100000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.U_BOOT_ENV";
-			reg = <0x00110000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.U-BOOT-ENV.backup";
-			reg = <0x00120000 0x00010000>;
-		};
-		partition@5 {
-			label = "QSPI.KERNEL";
-			reg = <0x00130000 0x0800000>;
-		};
-		partition@6 {
-			label = "QSPI.FILESYSTEM";
-			reg = <0x00930000 0x36D0000>;
-		};
-	};
-};
-
-&hdq {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdq_pins>;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&vpfe1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&vpfe1_pins_default>;
-	pinctrl-1 = <&vpfe1_pins_sleep>;
-
-	port {
-		vpfe1_ep: endpoint {
-			remote-endpoint = <&ov2659_1>;
-			ti,am437x-vpfe-interface = <0>;
-			bus-width = <8>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&uart0_pins_default>;
-	pinctrl-1 = <&uart0_pins_sleep>;
-};
-
-&mcasp1 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp1_pins>;
-	pinctrl-1 = <&mcasp1_sleep_pins>;
-
-	status = "okay";
-
-	op-mode = <0>;          /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializer */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		1 2 0 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&mux_synctimer32k_ck {
-	assigned-clocks = <&mux_synctimer32k_ck>;
-	assigned-clock-parents = <&clkdiv32k_ick>;
-};
-
-&cpu {
-	cpu0-supply = <&dcdc2>;
-};
-
-&wkup_m3_ipc {
-	firmware-name = "am43x-evm-scale-data.bin";
-};
-
-&pruss1_mdio {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
deleted file mode 100644
index 9a5437b3d6a8e..0000000000000
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ /dev/null
@@ -1,1003 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for AM43xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&scm_clocks {
-	sys_clkin_ck: clock-sys-clkin-31@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "sys_clkin_ck";
-		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
-		ti,bit-shift = <31>;
-		reg = <0x0040>;
-	};
-
-	crystal_freq_sel_ck: clock-crystal-freq-sel-29@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "crystal_freq_sel_ck";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <29>;
-		reg = <0x0040>;
-	};
-
-	sysboot_freq_sel_ck: clock-sysboot-freq-sel-22@44e10040 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "sysboot_freq_sel_ck";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: clock-adc-tsc-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "adc_tsc_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: clock-dcan0-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dcan0_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: clock-dcan1-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dcan1_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: clock-mcasp0-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "mcasp0_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: clock-mcasp1-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "mcasp1_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: clock-smartreflex0-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "smartreflex0_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: clock-smartreflex1-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "smartreflex1_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: clock-sha0-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "sha0_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: clock-aes0-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "aes0_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	rng_fck: clock-rng-fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "rng_fck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ehrpwm0_tbclk: clock-ehrpwm0-tbclk-0@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "ehrpwm0_tbclk";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: clock-ehrpwm1-tbclk-1@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "ehrpwm1_tbclk";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: clock-ehrpwm2-tbclk-2@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "ehrpwm2_tbclk";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm3_tbclk: clock-ehrpwm3-tbclk-4@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "ehrpwm3_tbclk";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <4>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm4_tbclk: clock-ehrpwm4-tbclk-5@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "ehrpwm4_tbclk";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <5>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm5_tbclk: clock-ehrpwm5-tbclk-6@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "ehrpwm5_tbclk";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <6>;
-		reg = <0x0664>;
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clock-clk-32768 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "clk_32768_ck";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clock-clk-rc32k {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "clk_rc32k_ck";
-		clock-frequency = <32768>;
-	};
-
-	virt_19200000_ck: clock-virt-19200000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_19200000_ck";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: clock-virt-24000000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_24000000_ck";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: clock-virt-25000000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_25000000_ck";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: clock-virt-26000000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_26000000_ck";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: clock-tclkin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "tclkin_ck";
-		clock-frequency = <26000000>;
-	};
-
-	dpll_core_ck: clock@2d20 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clock-output-names = "dpll_core_ck";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>;
-	};
-
-	dpll_core_x2_ck: clock-dpll-core-x2 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clock-output-names = "dpll_core_x2_ck";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: clock-dpll-core-m4-8@2d38 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m4_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d38>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m5_ck: clock-dpll-core-m5-8@2d3c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m5_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d3c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m6_ck: clock-dpll-core-m6-8@2d40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m6_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d40>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_mpu_ck: clock@2d60 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clock-output-names = "dpll_mpu_ck";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>;
-	};
-
-	dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@2d70 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_mpu_m2_ck";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_periphclk: clock-mpu-periphclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "mpu_periphclk";
-		clocks = <&dpll_mpu_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_ddr_ck: clock@2da0 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clock-output-names = "dpll_ddr_ck";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>;
-	};
-
-	dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@2db0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_ddr_m2_ck";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_disp_ck: clock@2e20 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clock-output-names = "dpll_disp_ck";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>;
-	};
-
-	dpll_disp_m2_ck: clock-dpll-disp-m2-8@2e30 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_disp_m2_ck";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e30>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: clock@2de0 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-j-type-clock";
-		clock-output-names = "dpll_per_ck";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>;
-	};
-
-	dpll_per_m2_ck: clock-dpll-per-m2-8@2df0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_m2_ck";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2df0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dpll_per_m2_div4_wkupdm_ck";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dpll_per_m2_div4_ck";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	clk_24mhz: clock-clk-24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "clk_24mhz";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clock-clkdiv32k {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "clkdiv32k_ck";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	clkdiv32k_ick: clock-clkdiv32k-ick-8@2a38 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "clkdiv32k_ick";
-		clocks = <&clkdiv32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2a38>;
-	};
-
-	sysclk_div: clock-sysclk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "sysclk_div";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: clock-pruss-ocp-gclk@4248 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "pruss_ocp_gclk";
-		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
-		reg = <0x4248>;
-	};
-
-	clk_32k_tpm_ck: clock-clk-32k-tpm {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "clk_32k_tpm_ck";
-		clock-frequency = <32768>;
-	};
-
-	timer1_fck: clock-timer1-fck@4200 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer1_fck";
-		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4200>;
-	};
-
-	timer2_fck: clock-timer2-fck@4204 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer2_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4204>;
-	};
-
-	timer3_fck: clock-timer3-fck@4208 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer3_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4208>;
-	};
-
-	timer4_fck: clock-timer4-fck@420c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer4_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x420c>;
-	};
-
-	timer5_fck: clock-timer5-fck@4210 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer5_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4210>;
-	};
-
-	timer6_fck: clock-timer6-fck@4214 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer6_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4214>;
-	};
-
-	timer7_fck: clock-timer7-fck@4218 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer7_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4218>;
-	};
-
-	wdt1_fck: clock-wdt1-fck@422c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "wdt1_fck";
-		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
-		reg = <0x422c>;
-	};
-
-	adc_mag_fck: adc_mag_fck@424c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_per_m2_ck>;
-		reg = <0x424c>;
-	};
-
-	l3_gclk: clock-l3-gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "l3_gclk";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dpll_core_m4_div2_ck";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: clock-l4hs-gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "l4hs_gclk";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: clock-l3s-gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "l3s_gclk";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: clock-l4ls-gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "l4ls_gclk";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "cpsw_125mhz_gclk";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@4238 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "cpsw_cpts_rft_clk";
-		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
-		reg = <0x4238>;
-	};
-
-	dpll_clksel_mac_clk: clock-dpll-clksel-mac-2@4234 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_clksel_mac_clk";
-		clocks = <&dpll_core_m5_ck>;
-		reg = <0x4234>;
-		ti,bit-shift = <2>;
-		ti,dividers = <2>, <5>;
-	};
-
-	clk_32k_mosc_ck: clock-clk-32k-mosc {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "clk_32k_mosc_ck";
-		clock-frequency = <32768>;
-	};
-
-	gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@4240 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "gpio0_dbclk_mux_ck";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4240>;
-	};
-
-	mmc_clk: clock-mmc {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "mmc_clk";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	gfx_fclk_clksel_ck: clock-gfx-fclk-clksel-1@423c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "gfx_fclk_clksel_ck";
-		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x423c>;
-	};
-
-	gfx_fck_div_ck: clock-gfx-fck-div@423c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "gfx_fck_div_ck";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x423c>;
-		ti,max-div = <2>;
-	};
-
-	disp_clk: clock-disp@4244 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "disp_clk";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x4244>;
-		ti,set-rate-parent;
-	};
-
-	dpll_extdev_ck: clock@2e60 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clock-output-names = "dpll_extdev_ck";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>;
-	};
-
-	dpll_extdev_m2_ck: clock-dpll-extdev-m2-8@2e70 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_extdev_m2_ck";
-		clocks = <&dpll_extdev_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mux_synctimer32k_ck: clock-mux-synctimer32k@4230 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "mux_synctimer32k_ck";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
-		reg = <0x4230>;
-	};
-
-	timer8_fck: clock-timer8-fck@421c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer8_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x421c>;
-	};
-
-	timer9_fck: clock-timer9-fck@4220 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer9_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4220>;
-	};
-
-	timer10_fck: clock-timer10-fck@4224 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer10_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4224>;
-	};
-
-	timer11_fck: clock-timer11-fck@4228 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "timer11_fck";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4228>;
-	};
-
-	cpsw_50m_clkdiv: clock-cpsw-50m-clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "cpsw_50m_clkdiv";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_5m_clkdiv: clock-cpsw-5m-clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "cpsw_5m_clkdiv";
-		clocks = <&cpsw_50m_clkdiv>;
-		clock-mult = <1>;
-		clock-div = <10>;
-	};
-
-	dpll_ddr_x2_ck: clock-dpll-ddr-x2 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clock-output-names = "dpll_ddr_x2_ck";
-		clocks = <&dpll_ddr_ck>;
-	};
-
-	dpll_ddr_m4_ck: clock-dpll-ddr-m4-8@2db8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_ddr_m4_ck";
-		clocks = <&dpll_ddr_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_clkdcoldo: clock-dpll-per-clkdcoldo-8@2e14 {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clock-output-names = "dpll_per_clkdcoldo";
-		clocks = <&dpll_per_ck>;
-		ti,clock-mult = <1>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e14>;
-		ti,invert-autoidle-bit;
-	};
-
-	dll_aging_clk_div: clock-dll-aging-clk-div@4250 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dll_aging_clk_div";
-		clocks = <&sys_clkin_ck>;
-		reg = <0x4250>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	div_core_25m_ck: clock-div-core-25m {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "div_core_25m_ck";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	func_12m_clk: clock-func-12m {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_12m_clk";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	vtp_clk_div: clock-vtp-clk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "vtp_clk_div";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usbphy_32khz_clkmux: clock-usbphy-32khz-clkmux@4260 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "usbphy_32khz_clkmux";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4260>;
-	};
-
-	usb_phy0_always_on_clk32k: clock-usb-phy0-always-on-clk32k-8@2a40 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "usb_phy0_always_on_clk32k";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a40>;
-	};
-
-	usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@2a48 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "usb_phy1_always_on_clk32k";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a48>;
-	};
-
-	clkout1_osc_div_ck: clock-clkout1-osc-div-ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "clkout1_osc_div_ck";
-		clocks = <&sys_clkin_ck>;
-		ti,bit-shift = <20>;
-		ti,max-div = <4>;
-		reg = <0x4100>;
-	};
-
-	clkout1_src2_mux_ck: clock-clkout1-src2-mux-ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "clkout1_src2_mux_ck";
-		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
-			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
-			 <&dpll_mpu_m2_ck>;
-		reg = <0x4100>;
-	};
-
-	clkout1_src2_pre_div_ck: clock-clkout1-src2-pre-div-ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "clkout1_src2_pre_div_ck";
-		clocks = <&clkout1_src2_mux_ck>;
-		ti,bit-shift = <4>;
-		ti,max-div = <8>;
-		reg = <0x4100>;
-	};
-
-	clkout1_src2_post_div_ck: clock-clkout1-src2-post-div-ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "clkout1_src2_post_div_ck";
-		clocks = <&clkout1_src2_pre_div_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <32>;
-		ti,index-power-of-two;
-		reg = <0x4100>;
-	};
-
-	clkout1_mux_ck: clock-clkout1-mux-ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "clkout1_mux_ck";
-		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
-			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
-		ti,bit-shift = <16>;
-		reg = <0x4100>;
-	};
-
-	clkout1_ck: clock-clkout1-ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "clkout1_ck";
-		clocks = <&clkout1_mux_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x4100>;
-	};
-};
-
-&prcm {
-	wkup_cm: clock@2800 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "wkup_cm";
-		reg = <0x2800 0x400>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x2800 0x400>;
-
-		l3s_tsc_clkctrl: clock@120 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3s_tsc_clkctrl";
-			reg = <0x120 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l4_wkup_aon_clkctrl: clock@228 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4_wkup_aon_clkctrl";
-			reg = <0x228 0xc>;
-			#clock-cells = <2>;
-		};
-
-		l4_wkup_clkctrl: clock@220 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4_wkup_clkctrl";
-			reg = <0x220 0x4>, <0x328 0x44>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	mpu_cm: clock@8300 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "mpu_cm";
-		reg = <0x8300 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x8300 0x100>;
-
-		mpu_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "mpu_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	gfx_l3_cm: clock@8400 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "gfx_l3_cm";
-		reg = <0x8400 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x8400 0x100>;
-
-		gfx_l3_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "gfx_l3_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4_rtc_cm: clock@8500 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l4_rtc_cm";
-		reg = <0x8500 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x8500 0x100>;
-
-		l4_rtc_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4_rtc_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	per_cm: clock@8800 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "per_cm";
-		reg = <0x8800 0xc00>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x8800 0xc00>;
-
-		l3_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3_clkctrl";
-			reg = <0x20 0x3c>, <0x78 0x2c>;
-			#clock-cells = <2>;
-		};
-
-		l3s_clkctrl: clock@68 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3s_clkctrl";
-			reg = <0x68 0xc>, <0x220 0x4c>;
-			#clock-cells = <2>;
-		};
-
-		pruss_ocp_clkctrl: clock@320 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "pruss_ocp_clkctrl";
-			reg = <0x320 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l4ls_clkctrl: clock@420 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4ls_clkctrl";
-			reg = <0x420 0x1a4>;
-			#clock-cells = <2>;
-		};
-
-		emif_clkctrl: clock@720 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "emif_clkctrl";
-			reg = <0x720 0x4>;
-			#clock-cells = <2>;
-		};
-
-		dss_clkctrl: clock@a20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "dss_clkctrl";
-			reg = <0xa20 0x4>;
-			#clock-cells = <2>;
-		};
-
-		cpsw_125mhz_clkctrl: clock@b20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "cpsw_125mhz_clkctrl";
-			reg = <0xb20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/am57-pruss.dtsi b/arch/arm/boot/dts/am57-pruss.dtsi
deleted file mode 100644
index 46c5383f0eee2..0000000000000
--- a/arch/arm/boot/dts/am57-pruss.dtsi
+++ /dev/null
@@ -1,226 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Common PRUSS data for TI AM57xx platforms
- */
-
-&ocp {
-	pruss1_tm: target-module@4b226000 {
-		compatible = "ti,sysc-pruss", "ti,sysc";
-		reg = <0x4b226000 0x4>,
-		      <0x4b226004 0x4>;
-		reg-names = "rev", "sysc";
-		ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
-				 SYSC_PRUSS_SUB_MWAIT)>;
-		ti,sysc-midle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>,
-				<SYSC_IDLE_SMART>;
-		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>,
-				<SYSC_IDLE_SMART>;
-		/* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
-		clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>;
-		clock-names = "fck";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x4b200000 0x80000>;
-
-		pruss1: pruss@0 {
-			compatible = "ti,am5728-pruss";
-			reg = <0x0 0x80000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pruss1_mem: memories@0 {
-				reg = <0x0 0x2000>,
-				      <0x2000 0x2000>,
-				      <0x10000 0x8000>;
-				reg-names = "dram0", "dram1",
-					    "shrdram2";
-			};
-
-			pruss1_cfg: cfg@26000 {
-				compatible = "ti,pruss-cfg", "syscon";
-				reg = <0x26000 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x26000 0x2000>;
-
-				clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pruss1_iepclk_mux: iepclk-mux@30 {
-						reg = <0x30>;
-						#clock-cells = <0>;
-						clocks = <&dpll_gmac_m3x2_ck>,  /* icss_iep_clk */
-							 <&dpll_gmac_h13x2_ck>; /* icss_clk */
-					};
-				};
-			};
-
-			pruss1_mii_rt: mii-rt@32000 {
-				compatible = "ti,pruss-mii", "syscon";
-				reg = <0x32000 0x58>;
-			};
-
-			pruss1_intc: interrupt-controller@20000 {
-				compatible = "ti,pruss-intc";
-				reg = <0x20000 0x2000>;
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "host_intr0", "host_intr1",
-						  "host_intr2", "host_intr3",
-						  "host_intr4", "host_intr5",
-						  "host_intr6", "host_intr7";
-			};
-
-			pru1_0: pru@34000 {
-				compatible = "ti,am5728-pru";
-				reg = <0x34000 0x3000>,
-				      <0x22000 0x400>,
-				      <0x22400 0x100>;
-				reg-names = "iram", "control", "debug";
-				firmware-name = "am57xx-pru1_0-fw";
-			};
-
-			pru1_1: pru@38000 {
-				compatible = "ti,am5728-pru";
-				reg = <0x38000 0x3000>,
-				      <0x24000 0x400>,
-				      <0x24400 0x100>;
-				reg-names = "iram", "control", "debug";
-				firmware-name = "am57xx-pru1_1-fw";
-			};
-
-			pruss1_mdio: mdio@32400 {
-				compatible = "ti,davinci_mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&dpll_gmac_h13x2_ck>;
-				clock-names = "fck";
-				bus_freq = <1000000>;
-				reg = <0x32400 0x90>;
-			};
-		};
-	};
-
-	pruss2_tm: target-module@4b2a6000 {
-		compatible = "ti,sysc-pruss", "ti,sysc";
-		reg = <0x4b2a6000 0x4>,
-		      <0x4b2a6004 0x4>;
-		reg-names = "rev", "sysc";
-		ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
-				 SYSC_PRUSS_SUB_MWAIT)>;
-		ti,sysc-midle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>,
-				<SYSC_IDLE_SMART>;
-		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>,
-				<SYSC_IDLE_SMART>;
-		/* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
-		clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS2_CLKCTRL 0>;
-		clock-names = "fck";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x4b280000 0x80000>;
-
-		pruss2: pruss@0 {
-			compatible = "ti,am5728-pruss";
-			reg = <0x0 0x80000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pruss2_mem: memories@0 {
-				reg = <0x0 0x2000>,
-				      <0x2000 0x2000>,
-				      <0x10000 0x8000>;
-				reg-names = "dram0", "dram1",
-					    "shrdram2";
-			};
-
-			pruss2_cfg: cfg@26000 {
-				compatible = "ti,pruss-cfg", "syscon";
-				reg = <0x26000 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x26000 0x2000>;
-
-				clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pruss2_iepclk_mux: iepclk-mux@30 {
-						reg = <0x30>;
-						#clock-cells = <0>;
-						clocks = <&dpll_gmac_m3x2_ck>,  /* icss_iep_clk */
-							 <&dpll_gmac_h13x2_ck>; /* icss_clk */
-					};
-				};
-			};
-
-			pruss2_mii_rt: mii-rt@32000 {
-				compatible = "ti,pruss-mii", "syscon";
-				reg = <0x32000 0x58>;
-			};
-
-			pruss2_intc: interrupt-controller@20000 {
-				compatible = "ti,pruss-intc";
-				reg = <0x20000 0x2000>;
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "host_intr0", "host_intr1",
-						  "host_intr2", "host_intr3",
-						  "host_intr4", "host_intr5",
-						  "host_intr6", "host_intr7";
-			};
-
-			pru2_0: pru@34000 {
-				compatible = "ti,am5728-pru";
-				reg = <0x34000 0x3000>,
-				      <0x22000 0x400>,
-				      <0x22400 0x100>;
-				reg-names = "iram", "control", "debug";
-				firmware-name = "am57xx-pru2_0-fw";
-			};
-
-			pru2_1: pru@38000 {
-				compatible = "ti,am5728-pru";
-				reg = <0x38000 0x3000>,
-				      <0x24000 0x400>,
-				      <0x24400 0x100>;
-				reg-names = "iram", "control", "debug";
-				firmware-name = "am57xx-pru2_1-fw";
-			};
-
-			pruss2_mdio: mdio@32400 {
-				compatible = "ti,davinci_mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&dpll_gmac_h13x2_ck>;
-				clock-names = "fck";
-				bus_freq = <1000000>;
-				reg = <0x32400 0x90>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi
deleted file mode 100644
index 6d7530a48c73f..0000000000000
--- a/arch/arm/boot/dts/am5718.dtsi
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "dra72x.dtsi"
-#include "am57-pruss.dtsi"
-
-/ {
-	compatible = "ti,am5718", "ti,dra7";
-};
-
-/*
- * These modules are not present on AM5718
- *
- * ATL
- * VCP1, VCP2
- * MLB
- * ISS
- * USB3
- */
-
-&usb3_tm {
-	status = "disabled";
-};
-
-&atl_tm {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am571x-idk-touchscreen.dtso b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso
deleted file mode 100644
index c051ee6c11306..0000000000000
--- a/arch/arm/boot/dts/am571x-idk-touchscreen.dtso
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-&i2c1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	touchscreen: edt-ft5506@38 {
-		compatible = "edt,edt-ft5506", "edt,edt-ft5x06";
-
-		reg = <0x38>;
-
-		interrupt-parent = <&gpio5>;
-		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-
-		/* GPIO line is inverted before going to touch panel */
-		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-
-		touchscreen-size-x = <1920>;
-		touchscreen-size-y = <1200>;
-
-		wakeup-source;
-	};
-};
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
deleted file mode 100644
index 48425020281a9..0000000000000
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ /dev/null
@@ -1,218 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "am5718.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "dra7-mmc-iodelay.dtsi"
-#include "dra72x-mmc-iodelay.dtsi"
-#include "am57xx-idk-common.dtsi"
-#include "dra7-ipu-dsp-common.dtsi"
-
-/ {
-	model = "TI AM5718 IDK";
-	compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		ipu2_memory_region: ipu2-memory@95800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x95800000 0x0 0x3800000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp1_memory_region: dsp1-memory@99000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x99000000 0x0 0x4000000>;
-			reusable;
-			status = "okay";
-		};
-
-		ipu1_memory_region: ipu1-memory@9d000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9d000000 0x0 0x2000000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		cpu0-led {
-			label = "status0:red:cpu0";
-			gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu0";
-		};
-
-		usr0-led {
-			label = "status0:green:usr";
-			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		heartbeat-led {
-			label = "status0:blue:heartbeat";
-			gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		usr1-led {
-			label = "status1:red:usr";
-			gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		usr2-led {
-			label = "status1:green:usr";
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		mmc0-led {
-			label = "status1:blue:mmc0";
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	idk-leds {
-		status = "disabled";
-		compatible = "gpio-leds";
-		red0-led {
-			label = "idk:red0";
-			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green0-led {
-			label = "idk:green0";
-			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue0-led {
-			label = "idk:blue0";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red1-led {
-			label = "idk:red1";
-			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green1-led {
-			label = "idk:green1";
-			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue1-led {
-			label = "idk:blue1";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red2-led {
-			label = "idk:red2";
-			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green2-led {
-			label = "idk:green2";
-			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue2-led {
-			label = "idk:blue2";
-			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red3-led {
-			label = "idk:red3";
-			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green3-led {
-			label = "idk:green3";
-			gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue3-led {
-			label = "idk:blue3";
-			gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
-
-&extcon_usb2 {
-	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
-};
-
-&sn65hvs882 {
-	load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-};
-
-&ipu2 {
-	status = "okay";
-	memory-region = <&ipu2_memory_region>;
-};
-
-&ipu1 {
-	status = "okay";
-	memory-region = <&ipu1_memory_region>;
-};
-
-&dsp1 {
-	status = "okay";
-	memory-region = <&dsp1_memory_region>;
-};
-
-&pcie1_rc {
-	status = "okay";
-	gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
-};
-
-&mmc1 {
-	pinctrl-names = "default", "hs";
-	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
-	pinctrl-1 = <&mmc1_pins_hs>;
-};
-
-&mmc2 {
-	pinctrl-names = "default", "hs", "ddr_3_3v";
-	pinctrl-0 = <&mmc2_pins_default>;
-	pinctrl-1 = <&mmc2_pins_hs>;
-	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
-};
-
-&pruss1_mdio {
-	status = "disabled";
-};
-
-&pruss2_mdio {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi
deleted file mode 100644
index 5e0bdf16d4858..0000000000000
--- a/arch/arm/boot/dts/am5728.dtsi
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "dra74x.dtsi"
-#include "am57-pruss.dtsi"
-
-/ {
-	compatible = "ti,am5728", "ti,dra7";
-};
-
-/*
- * These modules are not present on AM5728
- *
- * EVE1, EVE2
- * ATL
- * VCP1, VCP2
- * MLB
- * ISS
- * USB3, USB4
- */
-
-&usb3_tm {
-	status = "disabled";
-};
-
-&usb4_tm {
-	status = "disabled";
-};
-
-&atl_tm {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts
deleted file mode 100644
index 149cfafb90bfc..0000000000000
--- a/arch/arm/boot/dts/am5729-beagleboneai.dts
+++ /dev/null
@@ -1,704 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-/dts-v1/;
-
-#include "dra74x.dtsi"
-#include "am57xx-commercial-grade.dtsi"
-#include "dra74x-mmc-iodelay.dtsi"
-#include "dra74-ipu-dsp-common.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/dra.h>
-
-/ {
-	model = "BeagleBoard.org BeagleBone AI";
-	compatible = "beagle,am5729-beagleboneai", "ti,am5728",
-		     "ti,dra742", "ti,dra74", "ti,dra7";
-
-	aliases {
-		rtc0 = &tps659038_rtc;
-		rtc1 = &rtc;
-		display0 = &hdmi_conn;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		ipu2_memory_region: ipu2-memory@95800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x95800000 0x0 0x3800000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp1_memory_region: dsp1-memory@99000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x99000000 0x0 0x4000000>;
-			reusable;
-			status = "okay";
-		};
-
-		ipu1_memory_region: ipu1-memory@9d000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9d000000 0x0 0x2000000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp2_memory_region: dsp2-memory@9f000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9f000000 0x0 0x800000>;
-			reusable;
-			status = "okay";
-		};
-
-	};
-
-	vdd_adc: gpioregulator-vdd_adc {
-		compatible = "regulator-gpio";
-		regulator-name = "vdd_adc";
-		vin-supply = <&vdd_5v>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0
-			3300000 1>;
-	};
-
-	vdd_5v: fixedregulator-vdd_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		/* TPS51200 */
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		vin-supply = <&vdd_ddr>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 {
-			label = "beaglebone:green:usr0";
-			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led1 {
-			label = "beaglebone:green:usr1";
-			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led2 {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu";
-			default-state = "off";
-		};
-
-		led3 {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-
-		led4 {
-			label = "beaglebone:green:usr4";
-			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "netdev";
-			default-state = "off";
-		};
-	};
-
-	hdmi_conn: connector@0 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_encoder_out>;
-			};
-		};
-	};
-
-	hdmi_enc: encoder@0 {
-		/* "ti,tpd12s016" software compatible with "ti,tpd12s015"
-		 *  no need for individual driver
-		 */
-		compatible = "ti,tpd12s015";
-		gpios = <0>,
-			<0>,
-			<&gpio7 12 GPIO_ACTIVE_HIGH>;
-
-		ports {
-			#address-cells = <0x1>;
-			#size-cells = <0x0>;
-
-			port@0 {
-				reg = <0x0>;
-
-				hdmi_encoder_in: endpoint@0 {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <0x1>;
-
-				hdmi_encoder_out: endpoint@0 {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	emmc_pwrseq: emmc_pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
-	};
-
-	brcmf_pwrseq: brcmf_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>,	/* BT-REG-ON */
-				<&gpio3 18 GPIO_ACTIVE_LOW>;	/* WL-REG-ON */
-	};
-
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		ti,enable-id-detection;
-		id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps659038: tps659038@58 {
-		compatible = "ti,tps659038";
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-
-		#interrupt-cells = <2>;
-		interrupt-controller;
-
-		ti,system-power-controller;
-		ti,palmas-override-powerhold;
-
-		tps659038_pmic {
-			compatible = "ti,tps659038-pmic";
-
-			smps12-in-supply = <&vdd_5v>;
-			smps3-in-supply = <&vdd_5v>;
-			smps45-in-supply = <&vdd_5v>;
-			smps6-in-supply = <&vdd_5v>;
-			smps7-in-supply = <&vdd_5v>;
-			mps3-in-supply = <&vdd_5v>;
-			smps8-in-supply = <&vdd_5v>;
-			smps9-in-supply = <&vdd_5v>;
-			ldo1-in-supply = <&vdd_5v>;
-			ldo2-in-supply = <&vdd_5v>;
-			ldo3-in-supply = <&vdd_5v>;
-			ldo4-in-supply = <&vdd_5v>;
-			ldo9-in-supply = <&vdd_5v>;
-			ldoln-in-supply = <&vdd_5v>;
-			ldousb-in-supply = <&vdd_5v>;
-			ldortc-in-supply = <&vdd_5v>;
-
-			regulators {
-				vdd_mpu: smps12 {
-					/* VDD_MPU */
-					regulator-name = "smps12";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_ddr: smps3 {
-					/* VDD_DDR EMIF1 EMIF2 */
-					regulator-name = "smps3";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_dspeve: smps45 {
-					/* VDD_DSPEVE on AM572 */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_gpu: smps6 {
-					/* VDD_GPU */
-					regulator-name = "smps6";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_core: smps7 {
-					/* VDD_CORE */
-					regulator-name = "smps7";
-					regulator-min-microvolt = < 850000>;	/*** 1.15V */
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_iva: smps8 {
-					/* VDD_IVAHD */				/*** 1.06V */
-					regulator-name = "smps8";
-				};
-
-				vdd_3v3: smps9 {
-					/* VDD_3V3 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_sd: ldo1 {
-					/* VDDSHV8 - VSDMMC  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				vdd_1v8: ldo2 {
-					/* VDDSH18V */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_1v8_phy_ldo3: ldo3 {
-					/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_1v8_phy_ldo4: ldo4 {
-					/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				/* LDO5-8 unused */
-
-				vdd_rtc: ldo9 {
-					/* VDD_RTC  */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = < 840000>;
-					regulator-max-microvolt = <1160000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_1v8_pll: ldoln {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldortc_reg: ldortc {
-					/* VDDA_RTC  */
-					regulator-name = "ldortc";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				regen1: regen1 {
-					/* VDD_3V3_ON */
-					regulator-name = "regen1";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				regen2: regen2 {
-					/* Needed for PMIC internal resource */
-					regulator-name = "regen2";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-			};
-		};
-
-		tps659038_rtc: tps659038_rtc {
-			compatible = "ti,palmas-rtc";
-			interrupt-parent = <&tps659038>;
-			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-		};
-
-		tps659038_pwr_button: tps659038_pwr_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&tps659038>;
-			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-			ti,palmas-long-press-seconds = <12>;
-		};
-
-		tps659038_gpio: tps659038_gpio {
-			compatible = "ti,palmas-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-
-	/* STMPE811 touch screen controller */
-	stmpe811@41 {
-		compatible = "st,stmpe811";
-		reg = <0x41>;
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio2>;
-		interrupt-controller;
-		id = <0>;
-		blocks = <0x5>;
-		irq-trigger = <0x1>;
-		st,mod-12b = <1>; /* 12-bit ADC */
-		st,ref-sel = <0>; /* internal ADC reference */
-		st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
-		st,sample-time = <4>; /* ADC converstion time: 80 clocks */
-
-		stmpe_adc {
-			compatible = "st,stmpe-adc";
-			st,norequest-mask = <0x00>; /* mask any channels to be used by touchscreen */
-			adc0: iio-device@0 {
-				#io-channel-cells = <1>;
-				iio-channels = <&adc0 4>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>;
-				iio-channel-names = "AIN0_P9_39", "AIN1_P9_40", "AIN2_P9_37", "AIN3_P9_38",
-					"AIN4_P9_33", "AIN5_P9_36", "AIN6_P9_35";
-			};
-		};
-
-		stmpe_touchscreen {
-			status = "disabled";
-			compatible = "st,stmpe-ts";
-			/* 8 sample average control */
-			st,ave-ctrl = <3>;
-			/* 7 length fractional part in z */
-			st,fraction-z = <7>;
-			/*
-			 * 50 mA typical 80 mA max touchscreen drivers
-			 * current limit value
-			 */
-			st,i-drive = <1>;
-			/* 1 ms panel driver settling time */
-			st,settling = <3>;
-			/* 5 ms touch detect interrupt delay */
-			st,touch-det-delay = <5>;
-		};
-
-		stmpe_gpio {
-			compatible = "st,stmpe-gpio";
-		};
-
-		stmpe_pwm {
-			compatible = "st,stmpe-pwm";
-			#pwm-cells = <2>;
-		};
-	};
-};
-
-&mcspi3 {
-	status = "okay";
-	ti,pindir-d0-out-d1-in;
-
-	sn65hvs882: sn65hvs882@0 {
-		compatible = "pisosr-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		spi-cpol;
-	};
-};
-
-&cpu0 {
-	vdd-supply = <&vdd_mpu>;
-	voltage-tolerance = <1>;
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	reset-delay-us = <2>;
-
-	phy0: ethernet-phy@4 {
-		reg = <4>;
-		eee-broken-100tx;
-		eee-broken-1000t;
-	};
-};
-
-&mac_sw {
-	status = "okay";
-};
-
-&cpsw_port1 {
-	phy-handle = <&phy0>;
-	phy-mode = "rgmii-rxid";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
-
-&ocp {
-	pruss1_shmem: pruss_shmem@4b200000 {
-		status = "okay";
-		compatible = "ti,pruss-shmem";
-		reg = <0x4b200000 0x020000>;
-	};
-
-	pruss2_shmem: pruss_shmem@4b280000 {
-		status = "okay";
-		compatible = "ti,pruss-shmem";
-		reg = <0x4b280000 0x020000>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vdd_3v3>;
-	vqmmc-supply = <&vdd_sd>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_default>;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&vdd_1v8>;
-	vqmmc-supply = <&vdd_1v8>;
-	bus-width = <8>;
-	ti,non-removable;
-	non-removable;
-	mmc-pwrseq = <&emmc_pwrseq>;
-
-	ti,needs-special-reset;
-	dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
-	dma-names = "tx", "rx";
-
-};
-
-&mmc4 {
-	/* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */
-	/* HS: High speed up to 50 MHz (3.3 V signaling). */
-	/* SDR12: SDR up to 25 MHz (1.8 V signaling). */
-	/* SDR25: SDR up to 50 MHz (1.8 V signaling). */
-	/* SDR50: SDR up to 100 MHz (1.8 V signaling). */
-	/* SDR104: SDR up to 208 MHz (1.8 V signaling) */
-	/* DDR50: DDR up to 50 MHz (1.8 V signaling). */
-	status = "okay";
-
-	ti,needs-special-reset;
-	vmmc-supply = <&vdd_3v3>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	bus-width = <4>;
-	ti,non-removable;
-	non-removable;
-	no-1-8-v;
-	max-frequency = <24000000>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	mmc-pwrseq = <&brcmf_pwrseq>;
-
-	brcmf: wifi@1 {
-		status = "okay";
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-
-		brcm,sd-head-align = <4>;
-		brcm,sd_head_align = <4>;
-		brcm,sd_sgentry_align = <512>;
-
-		interrupt-parent = <&gpio3>;
-		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "host-wake";
-	};
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "otg";
-};
-
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&usb2 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&dss {
-	status = "okay";
-	vdda_video-supply = <&vdd_1v8_pll>;
-};
-
-&hdmi {
-	status = "okay";
-	vdda-supply = <&vdd_1v8_phy_ldo4>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&hdmi_encoder_in>;
-		};
-	};
-};
-
-&bandgap {
-	status = "okay";
-};
-
-&cpu_alert0 {
-	temperature = <55000>; /* milliCelsius */
-};
-
-&cpu_crit {
-	temperature = <85000>; /* milliCelsius */
-};
-
-&gpu_crit {
-	temperature = <85000>; /* milliCelsius */
-};
-
-&core_crit {
-	temperature = <85000>; /* milliCelsius */
-};
-
-&dspeve_crit {
-	temperature = <85000>; /* milliCelsius */
-};
-
-&iva_crit {
-	temperature = <85000>; /* milliCelsius */
-};
-
-&sata {
-	status = "disabled";
-};
-
-&sata_phy {
-	status = "disabled";
-};
-
-/* bluetooth */
-&uart6 {
-	status = "okay";
-};
-
-/* cape header stuff */
-&i2c4 {
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&cpu0_opp_table {
-	opp_slow-500000000 {
-		opp-shared;
-	};
-};
-
-&ipu2 {
-	status = "okay";
-	memory-region = <&ipu2_memory_region>;
-};
-
-&ipu1 {
-	status = "okay";
-	memory-region = <&ipu1_memory_region>;
-};
-
-&dsp1 {
-	status = "okay";
-	memory-region = <&dsp1_memory_region>;
-};
-
-&dsp2 {
-	status = "okay";
-	memory-region = <&dsp2_memory_region>;
-};
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
deleted file mode 100644
index 1d66278c3a722..0000000000000
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ /dev/null
@@ -1,203 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "am57xx-idk-common.dtsi"
-#include "dra74-ipu-dsp-common.dtsi"
-
-/ {
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		ipu2_memory_region: ipu2-memory@95800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x95800000 0x0 0x3800000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp1_memory_region: dsp1-memory@99000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x99000000 0x0 0x4000000>;
-			reusable;
-			status = "okay";
-		};
-
-		ipu1_memory_region: ipu1-memory@9d000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9d000000 0x0 0x2000000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp2_memory_region: dsp2-memory@9f000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9f000000 0x0 0x800000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	status-leds {
-		compatible = "gpio-leds";
-		cpu0-led {
-			label = "status0:red:cpu0";
-			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu0";
-		};
-
-		usr0-led {
-			label = "status0:green:usr";
-			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		heartbeat-led {
-			label = "status0:blue:heartbeat";
-			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		cpu1-led {
-			label = "status1:red:cpu1";
-			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu1";
-		};
-
-		usr1-led {
-			label = "status1:green:usr";
-			gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		mmc0-led {
-			label = "status1:blue:mmc0";
-			gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	idk-leds {
-		status = "disabled";
-		compatible = "gpio-leds";
-		red0-led {
-			label = "idk:red0";
-			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green0-led {
-			label = "idk:green0";
-			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue0-led {
-			label = "idk:blue0";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red1-led {
-			label = "idk:red1";
-			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green1-led {
-			label = "idk:green1";
-			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue1-led {
-			label = "idk:blue1";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red2-led {
-			label = "idk:red2";
-			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green2-led {
-			label = "idk:green2";
-			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue2-led {
-			label = "idk:blue2";
-			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red3-led {
-			label = "idk:red3";
-			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green3-led {
-			label = "idk:green3";
-			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue3-led {
-			label = "idk:blue3";
-			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
-
-&extcon_usb2 {
-	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
-};
-
-&sn65hvs882 {
-	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-};
-
-&pcie1_rc {
-	status = "okay";
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&ipu2 {
-	status = "okay";
-	memory-region = <&ipu2_memory_region>;
-};
-
-&ipu1 {
-	status = "okay";
-	memory-region = <&ipu1_memory_region>;
-};
-
-&dsp1 {
-	status = "okay";
-	memory-region = <&dsp1_memory_region>;
-};
-
-&dsp2 {
-	status = "okay";
-	memory-region = <&dsp2_memory_region>;
-};
diff --git a/arch/arm/boot/dts/am572x-idk-touchscreen.dtso b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso
deleted file mode 100644
index 573e932b12396..0000000000000
--- a/arch/arm/boot/dts/am572x-idk-touchscreen.dtso
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-&i2c1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	touchscreen: edt-ft5506@38 {
-		compatible = "edt,edt-ft5506", "edt,edt-ft5x06";
-
-		reg = <0x38>;
-
-		interrupt-parent = <&gpio3>;
-		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
-
-		/* GPIO line is inverted before going to touch panel */
-		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-
-		touchscreen-size-x = <1920>;
-		touchscreen-size-y = <1200>;
-
-		wakeup-source;
-	};
-};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
deleted file mode 100644
index 94a738cb0a4d6..0000000000000
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-
-#include "am5728.dtsi"
-#include "dra7-mmc-iodelay.dtsi"
-#include "dra74x-mmc-iodelay.dtsi"
-#include "am572x-idk-common.dtsi"
-
-/ {
-	model = "TI AM5728 IDK";
-	compatible = "ti,am5728-idk", "ti,am5728", "ti,dra7";
-};
-
-&mmc1 {
-	pinctrl-names = "default", "hs";
-	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
-	pinctrl-1 = <&mmc1_pins_hs>;
-};
-
-&mmc2 {
-	pinctrl-names = "default", "hs", "ddr_3_3v";
-	pinctrl-0 = <&mmc2_pins_default>;
-	pinctrl-1 = <&mmc2_pins_hs>;
-	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
-};
-
-&pruss1_mdio {
-	status = "disabled";
-};
-
-&pruss2_mdio {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi
deleted file mode 100644
index a1f029e9d1f3d..0000000000000
--- a/arch/arm/boot/dts/am5748.dtsi
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "dra74x-p.dtsi"
-#include "am57-pruss.dtsi"
-
-/ {
-	compatible = "ti,am5748", "ti,dra762", "ti,dra7";
-};
-
-/*
- * These modules are not present on AM5748
- *
- * EVE1, EVE2
- * ATL
- * VCP1, VCP2
- * MLB
- * ISS
- * USB3, USB4
- */
-
-&usb3_tm {
-	status = "disabled";
-};
-
-&usb4_tm {
-	status = "disabled";
-};
-
-&atl_tm {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
deleted file mode 100644
index 47b9174d23530..0000000000000
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-
-/dts-v1/;
-
-#include "am5748.dtsi"
-#include "dra7-mmc-iodelay.dtsi"
-#include "dra76x-mmc-iodelay.dtsi"
-#include "am572x-idk-common.dtsi"
-
-/ {
-	model = "TI AM5748 IDK";
-	compatible = "ti,am5748-idk", "ti,am5748", "ti,dra762", "ti,dra7";
-};
-
-&qspi {
-	spi-max-frequency = <96000000>;
-	flash@0 {
-		spi-max-frequency = <96000000>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default", "hs";
-	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
-	pinctrl-1 = <&mmc1_pins_hs>;
-};
-
-&mmc2 {
-	pinctrl-names = "default", "hs", "ddr_3_3v";
-	pinctrl-0 = <&mmc2_pins_default>;
-	pinctrl-1 = <&mmc2_pins_default>;
-	pinctrl-2 = <&mmc2_pins_default>;
-};
-
-&emif1 {
-	status = "okay";
-};
-
-&pruss1_mdio {
-	status = "disabled";
-};
-
-&pruss2_mdio {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
deleted file mode 100644
index 994e69ab38d72..0000000000000
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ /dev/null
@@ -1,647 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "am5728.dtsi"
-#include "am57xx-commercial-grade.dtsi"
-#include "dra74x-mmc-iodelay.dtsi"
-#include "dra74-ipu-dsp-common.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
-
-	aliases {
-		rtc0 = &mcp_rtc;
-		rtc1 = &tps659038_rtc;
-		rtc2 = &rtc;
-		display0 = &hdmi0;
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	main_12v0: fixedregulator-main_12v0 {
-		/* main supply */
-		compatible = "regulator-fixed";
-		regulator-name = "main_12v0";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	evm_5v0: fixedregulator-evm_5v0 {
-		/* Output of TPS54531D */
-		compatible = "regulator-fixed";
-		regulator-name = "evm_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&main_12v0>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		ipu2_memory_region: ipu2-memory@95800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x95800000 0x0 0x3800000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp1_memory_region: dsp1-memory@99000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x99000000 0x0 0x4000000>;
-			reusable;
-			status = "okay";
-		};
-
-		ipu1_memory_region: ipu1-memory@9d000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9d000000 0x0 0x2000000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp2_memory_region: dsp2-memory@9f000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9f000000 0x0 0x800000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	vdd_3v3: fixedregulator-vdd_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3";
-		vin-supply = <&regen1>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	aic_dvdd: fixedregulator-aic_dvdd {
-		compatible = "regulator-fixed";
-		regulator-name = "aic_dvdd_fixed";
-		vin-supply = <&vdd_3v3>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		/* TPS51200 */
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		vin-supply = <&smps3_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 {
-			label = "beagle-x15:usr0";
-			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led1 {
-			label = "beagle-x15:usr1";
-			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led2 {
-			label = "beagle-x15:usr2";
-			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led3 {
-			label = "beagle-x15:usr3";
-			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "disk-activity";
-			default-state = "off";
-		};
-	};
-
-	gpio_fan: gpio_fan {
-		/* Based on 5v 500mA AFB02505HHB */
-		compatible = "gpio-fan";
-		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0     0>,
-				     <13000 1>;
-		#cooling-cells = <2>;
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder {
-		compatible = "ti,tpd12s015";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	sound0: sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "BeagleBoard-X15";
-		simple-audio-card,widgets =
-			"Line", "Line Out",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Line Out",	"LLOUT",
-			"Line Out",	"RLOUT",
-			"MIC2L",	"Line In",
-			"MIC2R",	"Line In";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound0_master>;
-		simple-audio-card,frame-master = <&sound0_master>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp3>;
-		};
-
-		sound0_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3104>;
-			clocks = <&clkout2_clk>;
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps659038: tps659038@58 {
-		compatible = "ti,tps659038";
-		reg = <0x58>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		#interrupt-cells = <2>;
-		interrupt-controller;
-
-		ti,system-power-controller;
-		ti,palmas-override-powerhold;
-
-		tps659038_pmic {
-			compatible = "ti,tps659038-pmic";
-
-			regulators {
-				smps12_reg: smps12 {
-					/* VDD_MPU */
-					regulator-name = "smps12";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps3_reg: smps3 {
-					/* VDD_DDR */
-					regulator-name = "smps3";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_CORE */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				/* SMPS7 unused */
-
-				smps8_reg: smps8 {
-					/* VDD_1V8 */
-					regulator-name = "smps8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				/* SMPS9 unused */
-
-				ldo1_reg: ldo1 {
-					/* VDD_SD / VDDSHV8  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDD_SHV5 */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHYA */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDA_1V8_PHYB */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo9_reg: ldo9 {
-					/* VDD_RTC */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				regen1: regen1 {
-					/* VDD_3V3_ON */
-					regulator-name = "regen1";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-			};
-		};
-
-		tps659038_rtc: tps659038_rtc {
-			compatible = "ti,palmas-rtc";
-			interrupt-parent = <&tps659038>;
-			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-		};
-
-		tps659038_pwr_button: tps659038_pwr_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&tps659038>;
-			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-			ti,palmas-long-press-seconds = <12>;
-		};
-
-		tps659038_gpio: tps659038_gpio {
-			compatible = "ti,palmas-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		extcon_usb2: tps659038_usb {
-			compatible = "ti,palmas-usb-vid";
-			ti,enable-vbus-detection;
-			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-		};
-
-	};
-
-	tmp102: tmp102@48 {
-		compatible = "ti,tmp102";
-		reg = <0x48>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		#thermal-sensor-cells = <1>;
-	};
-
-	tlv320aic3104: tlv320aic3104@18 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3104";
-		reg = <0x18>;
-		assigned-clocks = <&clkoutmux2_clk_mux>;
-		assigned-clock-parents = <&sys_clk2_dclk_div>;
-
-		status = "okay";
-		adc-settle-ms = <40>;
-
-		AVDD-supply = <&vdd_3v3>;
-		IOVDD-supply = <&vdd_3v3>;
-		DRVDD-supply = <&vdd_3v3>;
-		DVDD-supply = <&aic_dvdd>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c32";
-		reg = <0x50>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	mcp_rtc: rtc@6f {
-		compatible = "microchip,mcp7941x";
-		reg = <0x6f>;
-		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
-				      <&dra7_pmx_core 0x424>;
-		interrupt-names = "irq", "wakeup";
-
-		vcc-supply = <&vdd_3v3>;
-		wakeup-source;
-	};
-};
-
-&gpio7_target {
-	ti,no-reset-on-init;
-	ti,no-idle-on-init;
-};
-
-&cpu0 {
-	vdd-supply = <&smps12_reg>;
-	voltage-tolerance = <1>;
-};
-
-&uart3 {
-	status = "okay";
-	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x3f8>;
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@1 {
-		reg = <1>;
-	};
-
-	phy1: ethernet-phy@2 {
-		reg = <2>;
-	};
-};
-
-&mac_sw {
-	status = "okay";
-};
-
-&cpsw_port1 {
-	phy-handle = <&phy0>;
-	phy-mode = "rgmii-rxid";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii-rxid";
-	ti,dual-emac-pvid = <2>;
-};
-
-&mmc1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_default>;
-
-	bus-width = <4>;
-	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
-	no-1-8-v;
-};
-
-&mmc2 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_default>;
-
-	vmmc-supply = <&vdd_3v3>;
-	vqmmc-supply = <&vdd_3v3>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-};
-
-&sata {
-	status = "okay";
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&usb2 {
-	/*
-	 * Stand alone usage is peripheral only.
-	 * However, with some resistor modifications
-	 * this port can be used via expansion connectors
-	 * as "host" or "dual-role". If so, provide
-	 * the necessary dr_mode override in the expansion
-	 * board's DT.
-	 */
-	dr_mode = "peripheral";
-};
-
-&cpu_trips {
-	cpu_alert1: cpu_alert1 {
-		temperature = <50000>; /* millicelsius */
-		hysteresis = <2000>; /* millicelsius */
-		type = "active";
-	};
-};
-
-&cpu_cooling_maps {
-	map1 {
-		trip = <&cpu_alert1>;
-		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-	};
-};
-
-&thermal_zones {
-	board_thermal: board_thermal {
-		polling-delay-passive = <1250>; /* milliseconds */
-		polling-delay = <1500>; /* milliseconds */
-
-				/* sensor       ID */
-		thermal-sensors = <&tmp102     0>;
-
-		board_trips: trips {
-			board_alert0: board_alert {
-				temperature = <40000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "active";
-			};
-
-			board_crit: board_crit {
-				temperature = <105000>; /* millicelsius */
-				hysteresis = <0>; /* millicelsius */
-				type = "critical";
-			};
-		};
-
-		board_cooling_maps: cooling-maps {
-			map0 {
-				trip = <&board_alert0>;
-				cooling-device =
-				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-			};
-		};
-       };
-};
-
-&dss {
-	status = "okay";
-
-	vdda_video-supply = <&ldoln_reg>;
-};
-
-&hdmi {
-	status = "okay";
-	vdda-supply = <&ldo4_reg>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
-
-&pcie1_rc {
-	status = "okay";
-	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
-&mcasp3 {
-	#sound-dai-cells = <0>;
-	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin2>;
-	status = "okay";
-
-	op-mode = <0>;	/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializers */
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-		1 2 0 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&ipu2 {
-	status = "okay";
-	memory-region = <&ipu2_memory_region>;
-};
-
-&ipu1 {
-	status = "okay";
-	memory-region = <&ipu1_memory_region>;
-};
-
-&dsp1 {
-	status = "okay";
-	memory-region = <&dsp1_memory_region>;
-};
-
-&dsp2 {
-	status = "okay";
-	memory-region = <&dsp2_memory_region>;
-};
-
-&pruss1_mdio {
-	status = "disabled";
-};
-
-&pruss2_mdio {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
deleted file mode 100644
index 83e174e053c77..0000000000000
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "am57xx-beagle-x15-common.dtsi"
-
-/ {
-	model = "TI AM5728 BeagleBoard-X15 rev B1";
-};
-
-&tpd12s015 {
-	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
-		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
-		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
-};
-
-&mmc1 {
-	pinctrl-names = "default", "hs";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_hs>;
-	vmmc-supply = <&vdd_3v3>;
-	vqmmc-supply = <&ldo1_reg>;
-};
-
-&mmc2 {
-	pinctrl-names = "default", "hs", "ddr_3_3v";
-	pinctrl-0 = <&mmc2_pins_default>;
-	pinctrl-1 = <&mmc2_pins_hs>;
-	pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
-};
-
-/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
-&phy1 {
-	max-speed = <100>;
-};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
deleted file mode 100644
index 656dd84460d24..0000000000000
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "am57xx-beagle-x15-common.dtsi"
-
-/ {
-	model = "TI AM5728 BeagleBoard-X15 rev C";
-};
-
-&tpd12s015 {
-	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
-		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
-		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
-};
-
-&mmc1 {
-	pinctrl-names = "default", "hs";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_hs>;
-	vmmc-supply = <&vdd_3v3>;
-	vqmmc-supply = <&ldo1_reg>;
-};
-
-&mmc2 {
-	pinctrl-names = "default", "hs", "ddr_3_3v";
-	pinctrl-0 = <&mmc2_pins_default>;
-	pinctrl-1 = <&mmc2_pins_hs>;
-	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
-};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
deleted file mode 100644
index 0a8b16505ed98..0000000000000
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "am57xx-beagle-x15-common.dtsi"
-
-/ {
-	/* NOTE: This describes the "original" pre-production A2 revision */
-	model = "TI AM5728 BeagleBoard-X15";
-};
-
-&tpd12s015 {
-	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
-		<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
-		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
-};
-
-&mmc1 {
-	pinctrl-names = "default", "hs";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_hs>;
-
-	vmmc-supply = <&ldo1_reg>;
-	no-1-8-v;
-};
-
-&mmc2 {
-	pinctrl-names = "default", "hs", "ddr_3_3v";
-	pinctrl-0 = <&mmc2_pins_default>;
-	pinctrl-1 = <&mmc2_pins_hs>;
-	pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
-};
-
-/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
-&phy1 {
-	max-speed = <100>;
-};
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
deleted file mode 100644
index 625b9b311b49d..0000000000000
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ /dev/null
@@ -1,628 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for CompuLab CL-SOM-AM57x System-on-Module
- *
- * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
- * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "am5728.dtsi"
-
-/ {
-	model = "CompuLab CL-SOM-AM57x";
-	compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins_default>;
-
-		led0 {
-			label = "cl-som-am57x:green";
-			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	vdd_3v3: fixedregulator-vdd_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	ads7846reg: fixedregulator-ads7846-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "ads7846-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	sound0: sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink0_master>;
-		simple-audio-card,frame-master = <&dailink0_master>;
-		simple-audio-card,widgets =
-					"Headphone", "Headphone Jack",
-					"Microphone", "Microphone Jack",
-					"Line", "Line Jack";
-		simple-audio-card,routing =
-					"Headphone Jack", "RHPOUT",
-					"Headphone Jack", "LHPOUT",
-					"LLINEIN", "Line Jack",
-					"MICIN", "Mic Bias",
-					"Mic Bias", "Microphone Jack";
-
-		dailink0_master: simple-audio-card,cpu {
-			sound-dai = <&mcasp3>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&wm8731>;
-			system-clock-frequency = <12000000>;
-		};
-	};
-};
-
-&dra7_pmx_core {
-	leds_pins_default: leds_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14)	/* gpmc_a15.gpio2_5 */
-		>;
-	};
-
-	i2c1_pins_default: i2c1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
-			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
-		>;
-	};
-
-	i2c3_pins_default: i2c3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
-			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
-		>;
-	};
-
-	i2c4_pins_default: i2c4_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10)	/* mcasp1_acl.i2c4_sda */
-			DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsr.i2c4_scl */
-		>;
-	};
-
-	tps659038_pins_default: tps659038_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
-		>;
-	};
-
-	mmc2_pins_default: mmc2_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	qspi1_pins: pinmux_qspi1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
-			DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d0 */
-			DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d1 */
-			DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
-			DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
-			DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs3.qspi1_cs1 */
-		>;
-	};
-
-	cpsw_pins_default: cpsw_pins_default {
-		pinctrl-single,pins = <
-			/* Slave at addr 0x0 */
-			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tclk */
-			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tctl */
-			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3 */
-			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td2 */
-			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td1 */
-			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td0 */
-			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */
-			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */
-			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */
-			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */
-			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */
-			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */
-
-			/* Slave at addr 0x1 */
-			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_tclk */
-			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
-			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
-			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
-			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
-			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
-			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
-			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
-			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
-			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
-			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
-		>;
-	};
-
-	cpsw_pins_sleep: cpsw_pins_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
-
-			/* Slave 2 */
-			DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
-		>;
-	};
-
-	davinci_mdio_pins_default: davinci_mdio_pins_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */
-			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3)	/* vin2a_d11.mdio_d */
-		>;
-	};
-
-	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15)
-		>;
-	};
-
-	ads7846_pins: pinmux_ads7846_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */
-		>;
-	};
-
-	mcasp3_pins_default: mcasp3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
-			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
-			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
-			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
-		>;
-	};
-
-	mcasp3_pins_sleep: mcasp3_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
-		>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_default>;
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins_default>;
-	clock-frequency = <400000>;
-};
-
-&i2c4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins_default>;
-	clock-frequency = <400000>;
-
-	tps659038: tps659038@58 {
-		compatible = "ti,tps659038";
-		reg = <0x58>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tps659038_pins_default>;
-
-		#interrupt-cells = <2>;
-		interrupt-controller;
-
-		ti,system-power-controller;
-
-		tps659038_pmic {
-			compatible = "ti,tps659038-pmic";
-
-			regulators {
-				smps12_reg: smps12 {
-					/* VDD_MPU */
-					regulator-name = "smps12";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps3_reg: smps3 {
-					/* VDD_DDR */
-					regulator-name = "smps3";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_DSPEVE */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_GPU */
-					regulator-name = "smps6";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps7_reg: smps7 {
-					/* VDD_CORE */
-					regulator-name = "smps7";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1160000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* VDD_IVA */
-					regulator-name = "smps8";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps9_reg: smps9 {
-					/* PMIC_3V3 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-
-				ldo1_reg: ldo1 {
-					/* VDD_SD / VDDSHV8  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDD_1V8 */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo9_reg: ldo9 {
-					/* VDD_RTC */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				/* regen1 not used */
-			};
-		};
-
-		tps659038_pwr_button: tps659038_pwr_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&tps659038>;
-			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-			ti,palmas-long-press-seconds = <12>;
-		};
-
-		tps659038_gpio: tps659038_gpio {
-			compatible = "ti,palmas-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-
-	rtc0: rtc@56 {
-		compatible = "emmicro,em3027";
-		reg = <0x56>;
-	};
-
-	eeprom_module: atmel@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	wm8731: wm8731@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8731";
-		reg = <0x1a>;
-		status = "okay";
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&smps12_reg>;
-	voltage-tolerance = <1>;
-};
-
-&sata {
-	status = "okay";
-};
-
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
-		status = "okay";
-	};
-	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
-		status = "okay";
-	};
-};
-
-&mmc2 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_default>;
-
-	vmmc-supply = <&vdd_3v3>;
-	bus-width = <8>;
-	ti,non-removable;
-	cap-mmc-dual-data-rate;
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi1_pins>;
-
-	spi-max-frequency = <48000000>;
-
-	spi_flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,m25p80", "jedec,spi-nor";
-		reg = <0>;				/* CS0 */
-		spi-max-frequency = <48000000>;
-
-		partition@0 {
-			label = "uboot";
-			reg = <0x0 0xc0000>;
-		};
-
-		partition@c0000 {
-			label = "uboot environment";
-			reg = <0xc0000 0x40000>;
-		};
-
-		partition@100000 {
-			label = "reserved";
-			reg = <0x100000 0x0>;
-		};
-	};
-
-	/* touch controller */
-	touchscreen@1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ads7846_pins>;
-
-		compatible = "ti,ads7846";
-		vcc-supply = <&ads7846reg>;
-
-		reg = <1>;                              /* CS1 */
-		spi-max-frequency = <1500000>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <31 0>;
-		pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
-
-
-		ti,x-min = /bits/ 16 <0x0>;
-		ti,x-max = /bits/ 16 <0x0fff>;
-		ti,y-min = /bits/ 16 <0x0>;
-		ti,y-max = /bits/ 16 <0x0fff>;
-
-		ti,x-plate-ohms = /bits/ 16 <180>;
-		ti,pressure-max = /bits/ 16 <255>;
-
-		ti,debounce-max = /bits/ 16 <30>;
-		ti,debounce-tol = /bits/ 16 <10>;
-		ti,debounce-rep = /bits/ 16 <1>;
-
-		wakeup-source;
-	};
-};
-
-&mac_sw {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_pins_default>;
-	pinctrl-1 = <&cpsw_pins_sleep>;
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-txid";
-	ti,dual-emac-pvid = <2>;
-};
-
-&davinci_mdio_sw {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_pins_default>;
-	pinctrl-1 = <&davinci_mdio_pins_sleep>;
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&usb2 {
-	dr_mode = "host";
-};
-
-&mcasp3 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp3_pins_default>;
-	pinctrl-1 = <&mcasp3_pins_sleep>;
-	status = "okay";
-
-	op-mode = <0>;	/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializers */
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-		1 2 0 0
-	>;
-};
-
-&gpio3_target {
-	ti,no-reset-on-init;
-};
-
-&gpio2_target {
-	status = "okay";
-	ti,no-reset-on-init;
-};
-
-&pruss1_mdio {
-	status = "disabled";
-};
-
-&pruss2_mdio {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am57xx-commercial-grade.dtsi b/arch/arm/boot/dts/am57xx-commercial-grade.dtsi
deleted file mode 100644
index 3eed6e09c8841..0000000000000
--- a/arch/arm/boot/dts/am57xx-commercial-grade.dtsi
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-&cpu_alert0 {
-	temperature = <80000>; /* milliCelsius */
-};
-
-&cpu_crit {
-	temperature = <90000>; /* milliCelsius */
-};
-
-&gpu_crit {
-	temperature = <90000>; /* milliCelsius */
-};
-
-&core_crit {
-	temperature = <90000>; /* milliCelsius */
-};
-
-&dspeve_crit {
-	temperature = <90000>; /* milliCelsius */
-};
-
-&iva_crit {
-	temperature = <90000>; /* milliCelsius */
-};
diff --git a/arch/arm/boot/dts/am57xx-evm.dtso b/arch/arm/boot/dts/am57xx-evm.dtso
deleted file mode 100644
index 12385a31061e9..0000000000000
--- a/arch/arm/boot/dts/am57xx-evm.dtso
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * DT overlay for AM57xx GP EVM boards
- *
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-&{/} {
-	compatible = "ti,am5728-evm", "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
-	model = "TI AM5728 EVM";
-
-	aliases {
-		display0 = "/display";
-		display1 = "/connector"; // Fixme: &lcd0 and &hdmi0 could be
-					 // resolved here correcly based on
-					 // information in the base dtb symbol
-					 // table with a fix in dtc
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-user1 {
-			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-			label = "USER1";
-			linux,code = <BTN_1>;
-		};
-
-		button-user2 {
-			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-			label = "USER2";
-			linux,code = <BTN_2>;
-		};
-
-		button-user3 {
-			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-			label = "USER3";
-			linux,code = <BTN_3>;
-		};
-
-		button-user4 {
-			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-			label = "USER4";
-			linux,code = <BTN_4>;
-		};
-
-		button-user5 {
-			gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
-			label = "USER5";
-			linux,code = <BTN_5>;
-		};
-	};
-
-	lcd0: display {
-		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
-		backlight = <&lcd_bl>;
-		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-		label = "lcd";
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	lcd_bl: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 243 245 247 249 251 252 253 255>;
-		default-brightness-level = <8>;
-		pwms = <&ehrpwm1 0 50000 0>;
-	};
-};
-
-&ehrpwm1 {
-	status = "okay";
-};
-
-&epwmss1 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	touchscreen@5c {
-		compatible = "pixcir,pixcir_tangoc";
-		attb-gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-		reg = <0x5c>;
-		reset-gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
-		touchscreen-size-x = <1024>;
-		touchscreen-size-y = <600>;
-	};
-};
-
-&uart8 {
-	status = "okay";
-};
-
-&dss {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			dpi_out: endpoint {
-				data-lines = <24>;
-				remote-endpoint = <&lcd_in>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
deleted file mode 100644
index 7f092a8811e88..0000000000000
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ /dev/null
@@ -1,608 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "am57xx-industrial-grade.dtsi"
-
-/ {
-	aliases {
-		rtc0 = &tps659038_rtc;
-		rtc1 = &rtc;
-		display0 = &hdmi0;
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	vmain: fixedregulator-vmain {
-		compatible = "regulator-fixed";
-		regulator-name = "VMAIN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	v3_3d: fixedregulator-v3_3d {
-		compatible = "regulator-fixed";
-		regulator-name = "V3_3D";
-		vin-supply = <&smps9_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	v1_2d: fixedregulator-v1_2d {
-		compatible = "regulator-fixed";
-		regulator-name = "V1_2D";
-		vin-supply = <&vmain>;
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		/* TPS51200 */
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		vin-supply = <&v3_3d>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	leds-iio {
-		status = "disabled";
-		compatible = "gpio-leds";
-		led-out0 {
-			label = "out0";
-			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out1 {
-			label = "out1";
-			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out2 {
-			label = "out2";
-			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out3 {
-			label = "out3";
-			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out4 {
-			label = "out4";
-			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out5 {
-			label = "out5";
-			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out6 {
-			label = "out6";
-			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out7 {
-			label = "out7";
-			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	hdmi0: connector@0 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder@0 {
-		compatible = "ti,tpd12s016", "ti,tpd12s015";
-
-		gpios = <0>, /* optional CT_CP_HPD */
-			<0>, /* optional LS_OE */
-			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint@0 {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint@0 {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	src_clk_x1: src_clk_x1 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <20000000>;
-	};
-};
-
-&dra7_pmx_core {
-	dcan1_pins_default: dcan1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* dcan1_tx */
-			DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0)		/* dcan1_rx */
-		>;
-	};
-
-	dcan1_pins_sleep: dcan1_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP)	/* dcan1_rx.off */
-		>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps659038: tps659038@58 {
-		compatible = "ti,tps659038";
-		reg = <0x58>;
-		interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_HIGH
-			       &dra7_pmx_core 0x418>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		ti,system-power-controller;
-		ti,palmas-override-powerhold;
-
-		tps659038_pmic {
-			compatible = "ti,tps659038-pmic";
-
-			smps12-in-supply = <&vmain>;
-			smps3-in-supply = <&vmain>;
-			smps45-in-supply = <&vmain>;
-			smps6-in-supply = <&vmain>;
-			smps7-in-supply = <&vmain>;
-			smps8-in-supply = <&vmain>;
-			smps9-in-supply = <&vmain>;
-			ldo1-in-supply = <&vmain>;
-			ldo2-in-supply = <&vmain>;
-			ldo3-in-supply = <&vmain>;
-			ldo4-in-supply = <&vmain>;
-			ldo9-in-supply = <&vmain>;
-			ldoln-in-supply = <&vmain>;
-			ldousb-in-supply = <&vmain>;
-			ldortc-in-supply = <&vmain>;
-
-			regulators {
-				smps12_reg: smps12 {
-					/* VDD_MPU */
-					regulator-name = "smps12";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps3_reg: smps3 {
-					/* VDD_DDR EMIF1 EMIF2 */
-					regulator-name = "smps3";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_DSPEVE on AM572 */
-					/* VDD_IVA + VDD_DSP on AM571 */
-					regulator-name = "smps45";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_GPU */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps7_reg: smps7 {
-					/* VDD_CORE */
-					regulator-name = "smps7";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* 5728 - VDD_IVAHD */
-					/* 5718 - N.C. test point */
-					regulator-name = "smps8";
-				};
-
-				smps9_reg: smps9 {
-					/* VDD_3_3D */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo1_reg: ldo1 {
-					/* VDDSHV8 - VSDMMC  */
-					/* NOTE: on rev 1.3a, data supply */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDDSH18V */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo3_reg: ldo3 {
-					/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				/* LDO5-8 unused */
-
-				ldo9_reg: ldo9 {
-					/* VDD_RTC  */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <840000>;
-					regulator-max-microvolt = <1160000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldortc_reg: ldortc {
-					/* VDDA_RTC  */
-					regulator-name = "ldortc";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				regen1: regen1 {
-					/* VDD_3V3_ON */
-					regulator-name = "regen1";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				regen2: regen2 {
-					/* Needed for PMIC internal resource */
-					regulator-name = "regen2";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-			};
-		};
-
-		tps659038_rtc: tps659038_rtc {
-			compatible = "ti,palmas-rtc";
-			interrupt-parent = <&tps659038>;
-			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-		};
-
-		tps659038_pwr_button: tps659038_pwr_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&tps659038>;
-			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-			ti,palmas-long-press-seconds = <12>;
-		};
-
-		tps659038_gpio: tps659038_gpio {
-			compatible = "ti,palmas-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		extcon_usb2: tps659038_usb {
-			compatible = "ti,palmas-usb-vid";
-			ti,enable-vbus-detection;
-			ti,enable-id-detection;
-			/* ID & VBUS GPIOs provided in board dts */
-		};
-	};
-
-	tpic2810: tpic2810@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	dsi_bridge: tc358778@e {
-		compatible = "toshiba,tc358778", "toshiba,tc358768";
-		reg = <0xe>;
-		status = "disabled";
-
-		clocks = <&src_clk_x1>;
-		clock-names = "refclk";
-
-		vddc-supply = <&v1_2d>;
-		vddmipi-supply = <&v1_2d>;
-		vddio-supply = <&v3_3d>;
-
-		dsi_bridge_ports: ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				rgb_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-					data-lines = <24>;
-				};
-			};
-		};
-	};
-};
-
-&mcspi3 {
-	status = "okay";
-	ti,pindir-d0-out-d1-in;
-
-	sn65hvs882: sn65hvs882@0 {
-		compatible = "pisosr-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		spi-cpol;
-	};
-};
-
-&uart3 {
-	status = "okay";
-	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
-			       &dra7_pmx_core 0x248>;
-};
-
-&rtc {
-	status = "okay";
-	ext-clk-src;
-};
-
-&mac_sw {
-	status = "okay";
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-rxid";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-rxid";
-	ti,dual-emac-pvid = <2>;
-};
-
-&davinci_mdio_sw {
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&usb2 {
-	extcon = <&extcon_usb2>;
-	dr_mode = "otg";
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&v3_3d>;
-	vqmmc-supply = <&ldo1_reg>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
-	no-1-8-v;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&v3_3d>;
-	vqmmc-supply = <&v3_3d>;
-	bus-width = <8>;
-	non-removable;
-	max-frequency = <96000000>;
-	no-1-8-v;
-};
-
-&dcan1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep", "active";
-	pinctrl-0 = <&dcan1_pins_sleep>;
-	pinctrl-1 = <&dcan1_pins_sleep>;
-	pinctrl-2 = <&dcan1_pins_default>;
-};
-
-&qspi {
-	status = "okay";
-
-	spi-max-frequency = <76800000>;
-	flash@0 {
-		compatible = "s25fl256s1", "jedec,spi-nor";
-		spi-max-frequency = <76800000>;
-		reg = <0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first four physical blocks
-		 * for a valid file to boot and the flash here is
-		 * 64KiB block size.
-		 */
-		partition@0 {
-			label = "QSPI.SPL";
-			reg = <0x00000000 0x00040000>;
-		};
-		partition@1 {
-			label = "QSPI.u-boot";
-			reg = <0x00040000 0x00100000>;
-		};
-		partition@2 {
-			label = "QSPI.u-boot-spl-os";
-			reg = <0x00140000 0x00080000>;
-		};
-		partition@3 {
-			label = "QSPI.u-boot-env";
-			reg = <0x001c0000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.u-boot-env.backup1";
-			reg = <0x001d0000 0x0010000>;
-		};
-		partition@5 {
-			label = "QSPI.kernel";
-			reg = <0x001e0000 0x0800000>;
-		};
-		partition@6 {
-			label = "QSPI.file-system";
-			reg = <0x009e0000 0x01620000>;
-		};
-	};
-};
-
-&cpu0 {
-	vdd-supply = <&smps12_reg>;
-};
-
-&hdmi {
-	status = "okay";
-
-	vdda-supply = <&ldo4_reg>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
-
-&dss {
-	status = "okay";
-
-	vdda_video-supply = <&ldoln_reg>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			dpi_out: endpoint {
-				remote-endpoint = <&rgb_in>;
-				data-lines = <24>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso
deleted file mode 100644
index 25d74e9f3c9ef..0000000000000
--- a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-/plugin/;
-
-&{/} {
-	aliases {
-		display0 = "/display";
-		display1 = "/connector";
-	};
-
-	lcd_bl: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 1>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-};
-
-&dsi_bridge {
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	lcd: display {
-		compatible = "osddisplays,osd101t2045-53ts";
-		reg = <0>;
-
-		label = "lcd";
-
-		backlight = <&lcd_bl>;
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-	};
-};
-
-&dsi_bridge_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	port@1 {
-		reg = <1>;
-		dsi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-		};
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ecap0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso
deleted file mode 100644
index 8cea7ba32487e..0000000000000
--- a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso
+++ /dev/null
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-&{/} {
-	aliases {
-		display0 = "/display";
-		display1 = "/connector";
-	};
-
-	lcd_bl: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 1>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-};
-
-&dsi_bridge {
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	lcd: display {
-		compatible = "osddisplays,osd101t2587-53ts";
-		reg = <0>;
-
-		label = "lcd";
-
-		backlight = <&lcd_bl>;
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-	};
-};
-
-&dsi_bridge_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	port@1 {
-		reg = <1>;
-		dsi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-		};
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ecap0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am57xx-industrial-grade.dtsi b/arch/arm/boot/dts/am57xx-industrial-grade.dtsi
deleted file mode 100644
index 422f953fc8d88..0000000000000
--- a/arch/arm/boot/dts/am57xx-industrial-grade.dtsi
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-&cpu_alert0 {
-	temperature = <90000>; /* milliCelsius */
-};
-
-&cpu_crit {
-	temperature = <105000>; /* milliCelsius */
-};
-
-&gpu_crit {
-	temperature = <105000>; /* milliCelsius */
-};
-
-&core_crit {
-	temperature = <105000>; /* milliCelsius */
-};
-
-&dspeve_crit {
-	temperature = <105000>; /* milliCelsius */
-};
-
-&iva_crit {
-	temperature = <105000>; /* milliCelsius */
-};
diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
deleted file mode 100644
index beef63e8a0057..0000000000000
--- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts
+++ /dev/null
@@ -1,176 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for CompuLab SBC-AM57x single board computer
- *
- * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
- * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
- */
-
-#include "am57xx-cl-som-am57x.dts"
-#include "compulab-sb-som.dtsi"
-
-/ {
-	model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x";
-	compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &hdmi;
-	};
-};
-
-&dra7_pmx_core {
-	uart3_pins_default: uart3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_rxd */
-			DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_txd */
-		>;
-	};
-
-	mmc1_pins_default: mmc1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1_sdcd.gpio6_27 */
-			DRA7XX_CORE_IOPAD(0x377c, PIN_INPUT | MUX_MODE14)	/* mmc1_sdwp.gpio6_28 */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
-		>;
-	};
-
-	i2c5_pins_default: i2c5_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr0.i2c5_sda */
-			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr1.i2c5_scl */
-		>;
-	};
-
-	lcd_pins_default: lcd_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14)      /* vin2a_vsync0.gpio4_0 */
-		>;
-	};
-
-	hdmi_pins: pinmux_hdmi_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
-			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
-		>;
-	};
-
-	hdmi_conn_pins: pinmux_hdmi_conn_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14)	/* spi1_cs2.gpio7_12 */
-		>;
-	};
-};
-
-&uart3 {
-	status = "okay";
-	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x3f8>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_default>;
-};
-
-&mmc1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_default>;
-
-	vmmc-supply = <&ldo1_reg>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
-};
-
-&usb1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-};
-
-&i2c5 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins_default>;
-	clock-frequency = <400000>;
-
-	eeprom_base: atmel@54 {
-		compatible = "atmel,24c08";
-		reg = <0x54>;
-		pagesize = <16>;
-	};
-
-	pca9555: pca9555@20 {
-		compatible = "nxp,pca9555";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&dss {
-	status = "okay";
-
-	vdda_video-supply = <&ldoln_reg>;
-
-	port {
-		dpi_lcd_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&lcd0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_pins_default>;
-
-	enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
-			&gpio4 0 GPIO_ACTIVE_HIGH>;
-
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&dpi_lcd_out>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&hdmi {
-	status = "okay";
-	vdda-supply = <&ldo4_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&hdmi_connector_in>;
-			lanes = <1 0 3 2 5 4 7 6>;
-		};
-	};
-};
-
-&hdmi_conn {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_conn_pins>;
-
-	hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-
-	port {
-		hdmi_connector_in: endpoint {
-			remote-endpoint = <&hdmi_out>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/amazon/Makefile b/arch/arm/boot/dts/amazon/Makefile
new file mode 100644
index 0000000000000..58af5c4846efc
--- /dev/null
+++ b/arch/arm/boot/dts/amazon/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ALPINE) += \
+	alpine-db.dtb
+dtb-$(CONFIG_ARCH_ALPINE) += \
+	alpine-db.dtb
diff --git a/arch/arm/boot/dts/amazon/alpine-db.dts b/arch/arm/boot/dts/amazon/alpine-db.dts
new file mode 100644
index 0000000000000..dfb5a08022732
--- /dev/null
+++ b/arch/arm/boot/dts/amazon/alpine-db.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2015 Annapurna Labs Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * Alternatively, redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   *   Redistributions of source code must retain the above copyright notice,
+ *       this list of conditions and the following disclaimer.
+ *
+ *   *   Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+/dts-v1/;
+
+#include "alpine.dtsi"
+
+/ {
+	model = "Annapurna Labs Alpine Dev Board";
+	/* no need for anything outside SOC */
+};
+
diff --git a/arch/arm/boot/dts/amazon/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi
new file mode 100644
index 0000000000000..ff68dfb4eb787
--- /dev/null
+++ b/arch/arm/boot/dts/amazon/alpine.dtsi
@@ -0,0 +1,176 @@
+/*
+ * Copyright 2015 Annapurna Labs Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * Alternatively, redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   *   Redistributions of source code must retain the above copyright notice,
+ *       this list of conditions and the following disclaimer.
+ *
+ *   *   Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	/* SOC compatibility */
+	compatible = "al,alpine";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;
+	};
+
+	/* CPU Configuration */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "al,alpine-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <1700000000>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+			clock-frequency = <1700000000>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+			clock-frequency = <1700000000>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+			clock-frequency = <1700000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		arch-timer {
+			compatible = "arm,cortex-a15-timer",
+				     "arm,armv7-timer";
+			interrupts =
+				<GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			clock-frequency = <50000000>;
+		};
+
+		/* Interrupt Controller */
+		gic: interrupt-controller@fb001000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			#size-cells = <0>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfb001000 0x0 0x1000>,
+			      <0x0 0xfb002000 0x0 0x2000>,
+			      <0x0 0xfb004000 0x0 0x2000>,
+			      <0x0 0xfb006000 0x0 0x2000>;
+			interrupts =
+				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		/* CPU Resume registers */
+		cpu-resume@fbff5ec0 {
+			compatible = "al,alpine-cpu-resume";
+			reg = <0x0 0xfbff5ec0 0x0 0x30>;
+		};
+
+		/* North Bridge Service Registers */
+		sysfabric-service@fb070000 {
+			compatible = "al,alpine-sysfabric-service", "syscon";
+			reg = <0x0 0xfb070000 0x0 0x10000>;
+		};
+
+		/* Performance Monitor Unit */
+		pmu {
+			compatible = "arm,cortex-a15-pmu";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@fd883000 {
+			compatible = "ns16550a";
+			reg = <0x0 0xfd883000 0x0 0x1000>;
+			clock-frequency = <375000000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart1: serial@fd884000 {
+			compatible = "ns16550a";
+			reg = <0x0 0xfd884000 0x0 0x1000>;
+			clock-frequency = <375000000>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		/* Internal PCIe Controller */
+		pcie@fbc00000 {
+			compatible = "pci-host-ecam-generic";
+			device_type = "pci";
+			#size-cells = <2>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			reg = <0x0 0xfbc00000 0x0 0x100000>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			/* Add legacy interrupts for SATA devices only */
+			interrupt-map = <0x4000 0 0 1 &gic 0 43 4>,
+					<0x4800 0 0 1 &gic 0 44 4>;
+
+			/* 32 bit non prefetchable memory space */
+			ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
+
+			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			interrupt-controller;
+			msi-controller;
+			al,msi-base-spi = <96>;
+			al,msi-num-spis = <64>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/amlogic/Makefile b/arch/arm/boot/dts/amlogic/Makefile
new file mode 100644
index 0000000000000..a84310780ea34
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_MESON6) += \
+	meson6-atv1200.dtb
+dtb-$(CONFIG_MACH_MESON8) += \
+	meson8-minix-neo-x8.dtb \
+	meson8b-ec100.dtb \
+	meson8b-mxq.dtb \
+	meson8b-odroidc1.dtb \
+	meson8m2-mxiii-plus.dtb
diff --git a/arch/arm/boot/dts/amlogic/meson.dtsi b/arch/arm/boot/dts/amlogic/meson.dtsi
new file mode 100644
index 0000000000000..8e3860d5d9160
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson.dtsi
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&saradc 8>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cbus: cbus@c1100000 {
+			compatible = "simple-bus";
+			reg = <0xc1100000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc1100000 0x200000>;
+
+			hhi: system-controller@4000 {
+				compatible = "amlogic,meson-hhi-sysctrl",
+					     "simple-mfd",
+					     "syscon";
+				reg = <0x4000 0x400>;
+			};
+
+			aiu: audio-controller@5400 {
+				compatible = "amlogic,aiu";
+				#sound-dai-cells = <2>;
+				sound-name-prefix = "AIU";
+				reg = <0x5400 0x2ac>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "i2s", "spdif";
+				status = "disabled";
+			};
+
+			assist: assist@7c00 {
+				compatible = "amlogic,meson-mx-assist", "syscon";
+				reg = <0x7c00 0x200>;
+			};
+
+			hwrng: rng@8100 {
+				compatible = "amlogic,meson-rng";
+				reg = <0x8100 0x8>;
+			};
+
+			uart_A: serial@84c0 {
+				compatible = "amlogic,meson6-uart";
+				reg = <0x84c0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				fifo-size = <128>;
+				status = "disabled";
+			};
+
+			uart_B: serial@84dc {
+				compatible = "amlogic,meson6-uart";
+				reg = <0x84dc 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c@8500 {
+				compatible = "amlogic,meson6-i2c";
+				reg = <0x8500 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-pwm";
+				reg = <0x8550 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-pwm";
+				reg = <0x8650 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			saradc: adc@8680 {
+				compatible = "amlogic,meson-saradc";
+				reg = <0x8680 0x34>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			uart_C: serial@8700 {
+				compatible = "amlogic,meson6-uart";
+				reg = <0x8700 0x18>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_B: i2c@87c0 {
+				compatible = "amlogic,meson6-i2c";
+				reg = <0x87c0 0x20>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usb0_phy: phy@8800 {
+				compatible = "amlogic,meson-mx-usb2-phy";
+				#phy-cells = <0>;
+				reg = <0x8800 0x20>;
+				status = "disabled";
+			};
+
+			usb1_phy: phy@8820 {
+				compatible = "amlogic,meson-mx-usb2-phy";
+				#phy-cells = <0>;
+				reg = <0x8820 0x20>;
+				status = "disabled";
+			};
+
+			sdio: mmc@8c20 {
+				compatible = "amlogic,meson-mx-sdio";
+				reg = <0x8c20 0x20>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spifc: spi@8c80 {
+				compatible = "amlogic,meson6-spifc";
+				reg = <0x8c80 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			sdhc: mmc@8e00 {
+				compatible = "amlogic,meson-mx-sdhc";
+				reg = <0x8e00 0x42>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			gpio_intc: interrupt-controller@9880 {
+				compatible = "amlogic,meson-gpio-intc";
+				reg = <0x9880 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+				status = "disabled";
+			};
+
+			wdt: watchdog@9900 {
+				compatible = "amlogic,meson6-wdt";
+				reg = <0x9900 0x8>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			timer_abcde: timer@9940 {
+				compatible = "amlogic,meson6-timer";
+				reg = <0x9940 0x18>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		L2: cache-controller@c4200000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xc4200000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		periph: bus@c4300000 {
+			compatible = "simple-bus";
+			reg = <0xc4300000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc4300000 0x10000>;
+
+			gic: interrupt-controller@1000 {
+				compatible = "arm,cortex-a9-gic";
+				reg = <0x1000 0x1000>,
+				      <0x100 0x100>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+		};
+
+		aobus: aobus@c8100000 {
+			compatible = "simple-bus";
+			reg = <0xc8100000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc8100000 0x100000>;
+
+			ao_arc_rproc: remoteproc@1c {
+				compatible = "amlogic,meson-mx-ao-arc";
+				reg = <0x1c 0x8>, <0x38 0x8>;
+				reg-names = "remap", "cpu";
+				status = "disabled";
+			};
+
+			ir_receiver: ir-receiver@480 {
+				compatible = "amlogic,meson6-ir";
+				reg = <0x480 0x20>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			uart_AO: serial@4c0 {
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
+				reg = <0x4c0 0x18>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@500 {
+				compatible = "amlogic,meson6-i2c";
+				reg = <0x500 0x20>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			rtc: rtc@740 {
+				compatible = "amlogic,meson6-rtc";
+				reg = <0x740 0x14>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		usb0: usb@c9040000 {
+			compatible = "snps,dwc2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc9040000 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <500>;
+			g-tx-fifo-size = <256 192 128 128 128>;
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb1: usb@c90c0000 {
+			compatible = "snps,dwc2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc90c0000 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		ethmac: ethernet@c9410000 {
+			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
+			reg = <0xc9410000 0x10000
+			       0xc1108108 0x4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		ahb_sram: sram@d9000000 {
+			compatible = "mmio-sram";
+			reg = <0xd9000000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xd9000000 0x20000>;
+		};
+
+		bootrom: bootrom@d9040000 {
+			compatible = "amlogic,meson-mx-bootrom", "syscon";
+			reg = <0xd9040000 0x10000>;
+		};
+
+		secbus: secbus@da000000 {
+			compatible = "simple-bus";
+			reg = <0xda000000 0x6000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xda000000 0x6000>;
+
+			efuse: nvmem@0 {
+				compatible = "amlogic,meson6-efuse";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+	};
+
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&saradc 8>;
+		io-channel-names = "sensor-channel";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+}; /* end of / */
diff --git a/arch/arm/boot/dts/amlogic/meson6-atv1200.dts b/arch/arm/boot/dts/amlogic/meson6-atv1200.dts
new file mode 100644
index 0000000000000..98e1c94c02611
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson6-atv1200.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ */
+
+/dts-v1/;
+#include "meson6.dtsi"
+
+/ {
+	model = "Geniatech ATV1200";
+	compatible = "geniatech,atv1200", "amlogic,meson6";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson6.dtsi b/arch/arm/boot/dts/amlogic/meson6.dtsi
new file mode 100644
index 0000000000000..4716030a48d0d
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson6.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ */
+
+#include "meson.dtsi"
+
+/ {
+	model = "Amlogic Meson6 SoC";
+	compatible = "amlogic,meson6";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+		};
+	};
+
+	apb2: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x40000>;
+	};
+
+	clk81: clk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <200000000>;
+	};
+}; /* end of / */
+
+&efuse {
+	status = "disabled";
+};
+
+&timer_abcde {
+	clocks = <&xtal>, <&clk81>;
+	clock-names = "xtal", "pclk";
+};
+
+&uart_AO {
+	clocks = <&xtal>, <&clk81>, <&clk81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+	clocks = <&xtal>, <&clk81>, <&clk81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	clocks = <&xtal>, <&clk81>, <&clk81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	clocks = <&xtal>, <&clk81>, <&clk81>;
+	clock-names = "xtal", "pclk", "baud";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts
new file mode 100644
index 0000000000000..c6d1c5a8a3bfe
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "meson8.dtsi"
+
+/ {
+	model = "MINIX NEO-X8";
+	compatible = "minix,neo-x8", "amlogic,meson8";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "x8:blue:power";
+			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&spi_nor_pins>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		compatible = "mxicy,mx25l1606e";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x100000>;
+		};
+
+		partition@100000 {
+			label = "env";
+			reg = <0x100000 0x10000>;
+		};
+	};
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pnictrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8.dtsi b/arch/arm/boot/dts/amlogic/meson8.dtsi
new file mode 100644
index 0000000000000..59932fbfd5d5f
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8.dtsi
@@ -0,0 +1,806 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ */
+
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "meson.dtsi"
+
+/ {
+	model = "Amlogic Meson8 SoC";
+	compatible = "amlogic,meson8";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu2: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x202>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu3: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x203>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-96000000 {
+			opp-hz = /bits/ 64 <96000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <875000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <925000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1025000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-1800000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1125000>;
+		};
+		opp-1992000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <1992000000>;
+			opp-microvolt = <1150000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-182142857 {
+			opp-hz = /bits/ 64 <182142857>;
+			opp-microvolt = <1150000>;
+		};
+		opp-318750000 {
+			opp-hz = /bits/ 64 <318750000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-510000000 {
+			opp-hz = /bits/ 64 <510000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-637500000 {
+			opp-hz = /bits/ 64 <637500000>;
+			opp-microvolt = <1150000>;
+			turbo-mode;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* 2 MiB reserved for Hardware ROM Firmware? */
+		hwrom@0 {
+			reg = <0x0 0x200000>;
+			no-map;
+		};
+
+		/*
+		 * 1 MiB reserved for the "ARM Power Firmware": this is ARM
+		 * code which is responsible for system suspend. It loads a
+		 * piece of ARC code ("arc_power" in the vendor u-boot tree)
+		 * into SRAM, executes that and shuts down the (last) ARM core.
+		 * The arc_power firmware then checks various wakeup sources
+		 * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or
+		 * simply the power key) and re-starts the ARM core once it
+		 * detects a wakeup request.
+		 */
+		power-firmware@4f00000 {
+			reg = <0x4f00000 0x100000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		soc {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&thermal_sensor>;
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	mmcbus: bus@c8000000 {
+		compatible = "simple-bus";
+		reg = <0xc8000000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xc8000000 0x8000>;
+
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
+		dmcbus: bus@6000 {
+			compatible = "simple-bus";
+			reg = <0x6000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x400>;
+
+			canvas: video-lut@20 {
+				compatible = "amlogic,meson8-canvas",
+					     "amlogic,canvas";
+				reg = <0x20 0x14>;
+			};
+		};
+	};
+
+	apb: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x200000>;
+
+		mali: gpu@c0000 {
+			compatible = "amlogic,meson8-mali", "arm,mali-450";
+			reg = <0xc0000 0x40000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp", "pmu",
+					  "pp0", "ppmmu0", "pp1", "ppmmu1",
+					  "pp2", "ppmmu2", "pp4", "ppmmu4",
+					  "pp5", "ppmmu5", "pp6", "ppmmu6";
+			resets = <&reset RESET_MALI>;
+
+			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+			clock-names = "bus", "core";
+
+			assigned-clocks = <&clkc CLKID_MALI>;
+			assigned-clock-rates = <318750000>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+}; /* end of / */
+
+&aiu {
+	compatible = "amlogic,aiu-meson8", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&aobus {
+	pmu: pmu@e0 {
+		compatible = "amlogic,meson8-pmu", "syscon";
+		reg = <0xe0 0x18>;
+	};
+
+	pinctrl_aobus: pinctrl@84 {
+		compatible = "amlogic,meson8-aobus-pinctrl";
+		reg = <0x84 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio_ao: ao-bank@14 {
+			reg = <0x14 0x4>,
+			      <0x2c 0x4>,
+			      <0x24 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 16>;
+		};
+
+		i2s_am_clk_pins: i2s-am-clk-out {
+			mux {
+				groups = "i2s_am_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s-ao-clk-out {
+			mux {
+				groups = "i2s_ao_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s-lr-clk-out {
+			mux {
+				groups = "i2s_lr_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s-out-ch01 {
+			mux {
+				groups = "i2s_out_ch01_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		i2c_ao_pins: i2c_mst_ao {
+			mux {
+				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+				function = "i2c_mst_ao";
+				bias-disable;
+			};
+		};
+
+		ir_recv_pins: remote {
+			mux {
+				groups = "remote_input";
+				function = "remote";
+				bias-disable;
+			};
+		};
+
+		pwm_f_ao_pins: pwm-f-ao {
+			mux {
+				groups = "pwm_f_ao";
+				function = "pwm_f_ao";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ao_arc_rproc {
+	compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+	amlogic,secbus2 = <&secbus2>;
+	sram = <&ao_arc_sram>;
+	resets = <&reset RESET_MEDIA_CPU>;
+	clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
+&cbus {
+	reset: reset-controller@4404 {
+		compatible = "amlogic,meson8b-reset";
+		reg = <0x4404 0x9c>;
+		#reset-cells = <1>;
+	};
+
+	analog_top: analog-top@81a8 {
+		compatible = "amlogic,meson8-analog-top", "syscon";
+		reg = <0x81a8 0x14>;
+	};
+
+	pwm_ef: pwm@86c0 {
+		compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+		reg = <0x86c0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clock-measure@8758 {
+		compatible = "amlogic,meson8-clk-measure";
+		reg = <0x8758 0x1c>;
+	};
+
+	pinctrl_cbus: pinctrl@9880 {
+		compatible = "amlogic,meson8-cbus-pinctrl";
+		reg = <0x9880 0x10>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio: banks@80b0 {
+			reg = <0x80b0 0x28>,
+			      <0x80e8 0x18>,
+			      <0x8120 0x18>,
+			      <0x8030 0x30>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_cbus 0 0 120>;
+		};
+
+		sd_a_pins: sd-a {
+			mux {
+				groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
+					"sd_d3_a", "sd_clk_a", "sd_cmd_a";
+				function = "sd_a";
+				bias-disable;
+			};
+		};
+
+		sd_b_pins: sd-b {
+			mux {
+				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
+					"sd_d3_b", "sd_clk_b", "sd_cmd_b";
+				function = "sd_b";
+				bias-disable;
+			};
+		};
+
+		sd_c_pins: sd-c {
+			mux {
+				groups = "sd_d0_c", "sd_d1_c", "sd_d2_c",
+					"sd_d3_c", "sd_clk_c", "sd_cmd_c";
+				function = "sd_c";
+				bias-disable;
+			};
+		};
+
+		sdxc_a_pins: sdxc-a {
+			mux {
+				groups = "sdxc_d0_a", "sdxc_d13_a",
+					 "sdxc_clk_a", "sdxc_cmd_a";
+				function = "sdxc_a";
+				bias-pull-up;
+			};
+		};
+
+		sdxc_b_pins: sdxc-b {
+			mux {
+				groups = "sdxc_d0_b", "sdxc_d13_b",
+					 "sdxc_clk_b", "sdxc_cmd_b";
+				function = "sdxc_b";
+				bias-pull-up;
+			};
+		};
+
+		spdif_out_pins: spdif-out {
+			mux {
+				groups = "spdif_out";
+				function = "spdif";
+				bias-disable;
+			};
+		};
+
+		spi_nor_pins: nor {
+			mux {
+				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
+				function = "nor";
+				bias-disable;
+			};
+		};
+
+		eth_pins: ethernet {
+			mux {
+				groups = "eth_tx_clk_50m", "eth_tx_en",
+					 "eth_txd1", "eth_txd0",
+					 "eth_rx_clk_in", "eth_rx_dv",
+					 "eth_rxd1", "eth_rxd0", "eth_mdio",
+					 "eth_mdc";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		pwm_e_pins: pwm-e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+				bias-disable;
+			};
+		};
+
+		uart_a1_pins: uart-a1 {
+			mux {
+				groups = "uart_tx_a1",
+				       "uart_rx_a1";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_a1_cts_rts_pins: uart-a1-cts-rts {
+			mux {
+				groups = "uart_cts_a1",
+				       "uart_rts_a1";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		xtal_32k_out_pins: xtal-32k-out {
+			mux {
+				groups = "xtal_32k_out";
+				function = "xtal";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ahb_sram {
+	ao_arc_sram: ao-arc-sram@0 {
+		compatible = "amlogic,meson8-ao-arc-sram";
+		reg = <0x0 0x8000>;
+		pool;
+	};
+
+	smp-sram@1ff80 {
+		compatible = "amlogic,meson8-smp-sram";
+		reg = <0x1ff80 0x8>;
+	};
+};
+
+&efuse {
+	compatible = "amlogic,meson8-efuse";
+	clocks = <&clkc CLKID_EFUSE>;
+	clock-names = "core";
+
+	temperature_calib: calib@1f4 {
+		/* only the upper two bytes are relevant */
+		reg = <0x1f4 0x4>;
+	};
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>;
+	clock-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson8-gpio-intc", "amlogic,meson-gpio-intc";
+	status = "okay";
+};
+
+&hhi {
+	clkc: clock-controller {
+		compatible = "amlogic,meson8-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <364285714>;
+	};
+};
+
+&hwrng {
+	compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&L2 {
+	arm,data-latency = <3 3 3>;
+	arm,tag-latency = <2 2 2>;
+	arm,filter-ranges = <0x100000 0xc0000000>;
+	prefetch-data = <1>;
+	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
+	arm,shared-override;
+};
+
+&periph {
+	scu@0 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x0 0x100>;
+	};
+
+	timer@200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x200 0x20>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+
+		/*
+		 * the arm_global_timer driver currently does not handle clock
+		 * rate changes. Keep it disabled for now.
+		 */
+		status = "disabled";
+	};
+
+	timer@600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+	};
+};
+
+&pwm_ab {
+	compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+};
+
+&pwm_cd {
+	compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+};
+
+&rtc {
+	compatible = "amlogic,meson8-rtc";
+	resets = <&reset RESET_RTC>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+	clock-names = "clkin", "core";
+	amlogic,hhi-sysctrl = <&hhi>;
+	nvmem-cells = <&temperature_calib>;
+	nvmem-cell-names = "temperature_calib";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
+&secbus {
+	secbus2: system-controller@4000 {
+		compatible = "amlogic,meson8-secbus2", "syscon";
+		reg = <0x4000 0x2000>;
+	};
+};
+
+&sdio {
+	compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
+&spifc {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&timer_abcde {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk";
+};
+
+&uart_AO {
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&usb0 {
+	compatible = "amlogic,meson8-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb1 {
+	compatible = "amlogic,meson8-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8b-ec100.dts b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
new file mode 100644
index 0000000000000..3da47349eaaf7
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "meson8b.dtsi"
+
+/ {
+	model = "Endless Computers Endless Mini";
+	compatible = "endless,ec100", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		pal-switch {
+			label = "pal";
+			linux,input-type = <EV_SW>;
+			linux,code = <KEY_SWITCHVIDEOMODE>;
+			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+		};
+
+		ntsc-switch {
+			label = "ntsc";
+			linux,input-type = <EV_SW>;
+			linux,code = <KEY_SWITCHVIDEOMODE>;
+			gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio GPIOH_9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		/*
+		 * shutdown is managed by the EC (embedded micro-controller)
+		 * which is configured through GPIOAO_2 (poweroff GPIO) and
+		 * GPIOAO_7 (power LED, which has to go LOW as well).
+		 */
+		gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		timeout-ms = <20000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "ec100:red:power";
+			/*
+			 * Needs to go LOW (together with the poweroff GPIO)
+			 * during shutdown to allow the EC (embedded
+			 * micro-controller) to shutdown the system. Setting
+			 * the output to LOW signals the EC to start a
+			 * "breathing"/pulsing effect until the power is fully
+			 * turned off.
+			 */
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	rtc32k_xtal: rtc32k-xtal-clk {
+		/* X2 in the schematics */
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "RTC32K";
+		#clock-cells = <0>;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "M8B-EC100";
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-rates = <270950400>,
+				       <294912000>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&rt5640>;
+			};
+		};
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		/*
+		 * Silergy SY6288CCAC-GP 2A Power Distribution Switch.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&vcc_5v>;
+
+		/*
+		 * signal name from the schematics: USB_PWR_EN
+		 */
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v: regulator-vcc5v {
+		/*
+		 * supplied by the main power input which called PWR_5V_STB
+		 * in the schematics
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC5V";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/*
+		 * signal name from the schematics: 3V3_5V_EN
+		 */
+		gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcck: regulator-vcck {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 0 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc1v8 {
+		/*
+		 * ABLIC S-1339D18-M5001-GP
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called
+		 * VDDIO_AO3.3V in the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_ddr3: regulator-vcc-ddr3 {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called
+		 * DDR3_1.5V in the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_DDR3_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&vcc_5v>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_rtc: regulator-vcc-rtc {
+		/*
+		 * Global Mixed-mode Technology Inc. G918T12U-GP
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_RTC";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		/*
+		 * When the board is powered then the input is VCC3V3,
+		 * otherwise power is taken from the coin cell battery.
+		 */
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vddee: regulator-vddee {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called VDDAO
+		 * in a part of the schematics.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 1 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&aiu {
+	status = "okay";
+
+	pinctrl-0 = <&i2s_am_clk_pins>, <&i2s_out_ao_clk_pins>,
+		    <&i2s_out_lr_clk_pins>, <&i2s_out_ch01_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A/G (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+			icplus,select-interrupt;
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+
+	rt5640: codec@1c {
+		compatible = "realtek,rt5640";
+
+		reg = <0x1c>;
+
+		#sound-dai-cells = <0>;
+
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
+
+		/*
+		 * TODO: realtek,ldo1-en-gpios is connected to GPIO_BSD_EN.
+		 * We currently cannot configure this pin correctly.
+		 * Luckily for us it's in the "right" state by default.
+		 */
+		realtek,in1-differential;
+	};
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <50000000>;
+
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&gpio_ao {
+	gpio-line-names = "Linux_TX", "Linux_RX",
+			  "SLP_S5_N", "USB2_OC_FLAG#",
+			  "HUB_RST", "USB_PWR_EN",
+			  "I2S_IN", "SLP_S1_N",
+			  "TCK", "TMS", "TDI", "TDO",
+			  "HDMI_CEC", "5640_IRQ",
+			  "MUTE", "S805_TEST#";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOX */
+			  "WIFI_SD_D0", "WIFI_SD_D1", "WIFI_SD_D2",
+			  "WIFI_SD_D3", "BTPCM_DOUT", "BTPCM_DIN",
+			  "BTPCM_SYNC", "BTPCM_CLK", "WIFI_SD_CLK",
+			  "WIFI_SD_CMD", "WIFI_32K", "WIFI_PWREN",
+			  "UART_B_TX", "UART_B_RX", "UART_B_CTS_N",
+			  "UART_B_RTS_N", "BT_EN", "WIFI_WAKE_HOST",
+			  /* Bank GPIOY */
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "",
+			  /* Bank GPIODV */
+			  "VCCK_PWM_C", "I2C_SDA_A", "I2C_SCL_A",
+			  "I2C_SDA_B", "I2C_SCL_B", "VDDEE_PWM_D",
+			  "VDDEE_PWM 3V3_5V_EN",
+			  /* Bank GPIOH */
+			  "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
+			  "RMII_IRQ", "RMII_RST#", "RMII_TXD1",
+			  "RMII_TXD0", "AV_select_1", "AV_select_2",
+			  "MCU_Control_S",
+			  /* Bank CARD */
+			  "SD_D1_B", "SD_D0_B", "SD_CLK_8726MX",
+			  "SD_CMD_8726MX", "SD_D3_B", "SD_D2_B",
+			  "CARD_EN_DET (CARD_DET)",
+			  /* Bank BOOT */
+			  "NAND_D0 (EMMC)", "NAND_D1 (EMMC)",
+			  "NAND_D2 (EMMC)", "NAND_D3 (EMMC)",
+			  "NAND_D4 (EMMC)", "NAND_D5 (EMMC)",
+			  "NAND_D6 (EMMC)", "NAND_D7 (EMMC)",
+			  "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)",
+			  "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)",
+			  "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)",
+			  "nWE_S1 NAND_nWE (EMMC)",  "", "", "SPI_CS",
+			  /* Bank DIF */
+			  "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV",
+			  "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5",
+			  "RMII_TXEN", "CPUETH_25MOUT", "RMII_MDC",
+			  "RMII_MDIO";
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>, <&xtal>;
+	clock-names = "clkin0", "clkin1";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&rtc32k_xtal>;
+	vdd-supply = <&vcc_rtc>;
+};
+
+/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/*
+ * connected to the Bluetooth part of the RTL8723BS SDIO wifi / Bluetooth
+ * combo chip. This is only available on the variant with 2GB RAM.
+ */
+&uart_B {
+	status = "okay";
+	pinctrl-0 = <&uart_b0_pins>, <&uart_b0_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&usb1 {
+	status = "okay";
+	vbus-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8b-mxq.dts b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
new file mode 100644
index 0000000000000..7adedd3258c33
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "meson8b.dtsi"
+
+/ {
+	model = "TRONFY MXQ S805";
+	compatible = "tronfy,mxq", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	vcck: regulator-vcck {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 0 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddee: regulator-vddee {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 1 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A/G (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+			icplus,select-interrupt;
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>, <&xtal>;
+	clock-names = "clkin0", "clkin1";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
new file mode 100644
index 0000000000000..941682844faf4
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hardkernel ODROID-C1";
+	compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+		mmc0 = &sd_card_slot;
+		mmc1 = &sdhc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-blue {
+			label = "c1:blue:alive";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	p5v0: regulator-p5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		/*
+		 * signal name from schematics: TFLASH_VDD_EN
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_3v3>;
+
+		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_3v3>;
+
+		/*
+		 * signal name from schematics: TF_3V3N_1V8_EN
+		 */
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0
+			  1800000 1>;
+	};
+
+	rtc32k_xtal: rtc32k-xtal-clk {
+		/* X3 in the schematics */
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "RTC32K";
+		#clock-cells = <0>;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		/*
+		 * RICHTEK RT9179 configured for a fixed output voltage of
+		 * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and
+		 * VDD1V8 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		/*
+		 * Monolithic Power Systems MP2161 configured for a fixed
+		 * output voltage of 3.3V. This supplies not only VCC3V3 but
+		 * also VDD3V3 and VDDIO_AO3V3 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vcck: regulator-vcck {
+		/* Monolithic Power Systems MP2161 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&p5v0>;
+
+		pwms = <&pwm_cd 0 12218 0>;
+		pwm-dutycycle-range = <91 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddc_ddr: regulator-vddc-ddr {
+		/*
+		 * Monolithic Power Systems MP2161 configured for a fixed
+		 * output voltage of 1.5V. This supplies not only DDR_VDDC but
+		 * also DDR3_1V5 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "DDR_VDDC";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vddee: regulator-vddee {
+		/* Monolithic Power Systems MP2161 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&p5v0>;
+
+		pwms = <&pwm_cd 1 12218 0>;
+		pwm-dutycycle-range = <91 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd_rtc: regulator-vdd-rtc {
+		/*
+		 * Torex Semiconductor XC6215 configured for a fixed output of
+		 * 0.9V.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_RTC";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&vcc_3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&efuse {
+	ethernet_mac_address: mac@1b4 {
+		reg = <0x1b4 0x6>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy>;
+	phy-mode = "rgmii-id";
+
+	nvmem-cells = <&ethernet_mac_address>;
+	nvmem-cell-names = "mac-address";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Realtek RTL8211F (0x001cc916) */
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOX */
+			  "J2 Header Pin 35", "J2 Header Pin 36",
+			  "J2 Header Pin 32", "J2 Header Pin 31",
+			  "J2 Header Pin 29", "J2 Header Pin 18",
+			  "J2 Header Pin 22", "J2 Header Pin 16",
+			  "J2 Header Pin 23", "J2 Header Pin 21",
+			  "J2 Header Pin 19", "J2 Header Pin 33",
+			  "J2 Header Pin 8", "J2 Header Pin 10",
+			  "J2 Header Pin 15", "J2 Header Pin 13",
+			  "J2 Header Pin 24", "J2 Header Pin 26",
+			  /* Bank GPIOY */
+			  "Revision (upper)", "Revision (lower)",
+			  "J2 Header Pin 7", "", "J2 Header Pin 12",
+			  "J2 Header Pin 11", "", "", "",
+			  "TFLASH_VDD_EN", "", "",
+			  /* Bank GPIODV */
+			  "VCCK_PWM (PWM_C)", "I2CA_SDA", "I2CA_SCL",
+			  "I2CB_SDA", "I2CB_SCL", "VDDEE_PWM (PWM_D)",
+			  "",
+			  /* Bank GPIOH */
+			  "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
+			  "ETH_PHY_INTR", "ETH_PHY_NRST", "ETH_TXD1",
+			  "ETH_TXD0", "ETH_TXD3", "ETH_TXD2",
+			  "ETH_RGMII_TX_CLK",
+			  /* Bank CARD */
+			  "SD_DATA1 (SDB_D1)", "SD_DATA0 (SDB_D0)",
+			  "SD_CLK",  "SD_CMD", "SD_DATA3 (SDB_D3)",
+			  "SD_DATA2 (SDB_D2)", "SD_CDN (SD_DET_N)",
+			  /* Bank BOOT */
+			  "SDC_D0 (EMMC)", "SDC_D1 (EMMC)",
+			  "SDC_D2 (EMMC)", "SDC_D3 (EMMC)",
+			  "SDC_D4 (EMMC)", "SDC_D5 (EMMC)",
+			  "SDC_D6 (EMMC)", "SDC_D7 (EMMC)",
+			  "SDC_CLK (EMMC)", "SDC_RSTn (EMMC)",
+			  "SDC_CMD (EMMC)", "BOOT_SEL", "", "", "",
+			  "", "", "", "",
+			  /* Bank DIF */
+			  "ETH_RXD1", "ETH_RXD0", "ETH_RX_DV",
+			  "RGMII_RX_CLK", "ETH_RXD3", "ETH_RXD2",
+			  "ETH_TXEN", "ETH_PHY_REF_CLK_25MOUT",
+			  "ETH_MDC", "ETH_MDIO";
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX", "UART RX", "",
+			  "TF_3V3N_1V8_EN", "USB_HUB_RST_N",
+			  "USB_OTG_PWREN", "J7 Header Pin 2",
+			  "IR_IN", "J7 Header Pin 4",
+			  "J7 Header Pin 6", "J7 Header Pin 5",
+			  "J7 Header Pin 7", "HDMI_CEC",
+			  "SYS_LED", "", "";
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&tflash_vdd>;
+		vqmmc-supply = <&tf_io>;
+	};
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>, <&xtal>;
+	clock-names = "clkin0", "clkin1";
+};
+
+&rtc {
+	/* needs to be enabled manually when a battery is connected */
+	clocks = <&rtc32k_xtal>;
+	vdd-supply = <&vdd_rtc>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		/* Genesys Logic GL852G usb hub */
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&p5v0>;
+		reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8b.dtsi b/arch/arm/boot/dts/amlogic/meson8b.dtsi
new file mode 100644
index 0000000000000..5198f5177c2c1
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b.dtsi
@@ -0,0 +1,781 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "meson.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu2: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x202>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu3: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x203>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-96000000 {
+			opp-hz = /bits/ 64 <96000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1320000000 {
+			opp-hz = /bits/ 64 <1320000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1488000000 {
+			opp-hz = /bits/ 64 <1488000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-microvolt = <1140000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-255000000 {
+			opp-hz = /bits/ 64 <255000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-364285714 {
+			opp-hz = /bits/ 64 <364285714>;
+			opp-microvolt = <1100000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-510000000 {
+			opp-hz = /bits/ 64 <510000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-637500000 {
+			opp-hz = /bits/ 64 <637500000>;
+			opp-microvolt = <1100000>;
+			turbo-mode;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* 2 MiB reserved for Hardware ROM Firmware? */
+		hwrom@0 {
+			reg = <0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		soc {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&thermal_sensor>;
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	mmcbus: bus@c8000000 {
+		compatible = "simple-bus";
+		reg = <0xc8000000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xc8000000 0x8000>;
+
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8b-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
+		dmcbus: bus@6000 {
+			compatible = "simple-bus";
+			reg = <0x6000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x400>;
+
+			canvas: video-lut@48 {
+				compatible = "amlogic,meson8b-canvas",
+					     "amlogic,canvas";
+				reg = <0x48 0x14>;
+			};
+		};
+	};
+
+	apb: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x200000>;
+
+		mali: gpu@c0000 {
+			compatible = "amlogic,meson8b-mali", "arm,mali-450";
+			reg = <0xc0000 0x40000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp", "pmu",
+					  "pp0", "ppmmu0", "pp1", "ppmmu1";
+			resets = <&reset RESET_MALI>;
+			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+			clock-names = "bus", "core";
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+}; /* end of / */
+
+&aiu {
+	compatible = "amlogic,aiu-meson8b", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&aobus {
+	pmu: pmu@e0 {
+		compatible = "amlogic,meson8b-pmu", "syscon";
+		reg = <0xe0 0x18>;
+	};
+
+	pinctrl_aobus: pinctrl@84 {
+		compatible = "amlogic,meson8b-aobus-pinctrl";
+		reg = <0x84 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio_ao: ao-bank@14 {
+			reg = <0x14 0x4>,
+				<0x2c 0x4>,
+				<0x24 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 16>;
+		};
+
+		i2s_am_clk_pins: i2s-am-clk-out {
+			mux {
+				groups = "i2s_am_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s-ao-clk-out {
+			mux {
+				groups = "i2s_ao_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s-lr-clk-out {
+			mux {
+				groups = "i2s_lr_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s-out-ch01 {
+			mux {
+				groups = "i2s_out_01";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		spdif_out_1_pins: spdif-out-1 {
+			mux {
+				groups = "spdif_out_1";
+				function = "spdif_1";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		ir_recv_pins: remote {
+			mux {
+				groups = "remote_input";
+				function = "remote";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ao_arc_rproc {
+	compatible = "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
+	amlogic,secbus2 = <&secbus2>;
+	sram = <&ao_arc_sram>;
+	resets = <&reset RESET_MEDIA_CPU>;
+	clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
+&cbus {
+	reset: reset-controller@4404 {
+		compatible = "amlogic,meson8b-reset";
+		reg = <0x4404 0x9c>;
+		#reset-cells = <1>;
+	};
+
+	analog_top: analog-top@81a8 {
+		compatible = "amlogic,meson8b-analog-top", "syscon";
+		reg = <0x81a8 0x14>;
+	};
+
+	pwm_ef: pwm@86c0 {
+		compatible = "amlogic,meson8b-pwm";
+		reg = <0x86c0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clock-measure@8758 {
+		compatible = "amlogic,meson8b-clk-measure";
+		reg = <0x8758 0x1c>;
+	};
+
+	pinctrl_cbus: pinctrl@9880 {
+		compatible = "amlogic,meson8b-cbus-pinctrl";
+		reg = <0x9880 0x10>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio: banks@80b0 {
+			reg = <0x80b0 0x28>,
+				<0x80e8 0x18>,
+				<0x8120 0x18>,
+				<0x8030 0x38>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_cbus 0 0 83>;
+		};
+
+		eth_rgmii_pins: eth-rgmii {
+			mux {
+				groups = "eth_tx_clk",
+					 "eth_tx_en",
+					 "eth_txd1_0",
+					 "eth_txd0_0",
+					 "eth_rx_clk",
+					 "eth_rx_dv",
+					 "eth_rxd1",
+					 "eth_rxd0",
+					 "eth_mdio_en",
+					 "eth_mdc",
+					 "eth_ref_clk",
+					 "eth_txd2",
+					 "eth_txd3",
+					 "eth_rxd3",
+					 "eth_rxd2";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		eth_rmii_pins: eth-rmii {
+			mux {
+				groups = "eth_tx_en",
+					 "eth_txd1_0",
+					 "eth_txd0_0",
+					 "eth_rx_clk",
+					 "eth_rx_dv",
+					 "eth_rxd1",
+					 "eth_rxd0",
+					 "eth_mdio_en",
+					 "eth_mdc";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		i2c_a_pins: i2c-a {
+			mux {
+				groups = "i2c_sda_a", "i2c_sck_a";
+				function = "i2c_a";
+				bias-disable;
+			};
+		};
+
+		sd_b_pins: sd-b {
+			mux {
+				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
+					"sd_d3_b", "sd_clk_b", "sd_cmd_b";
+				function = "sd_b";
+				bias-disable;
+			};
+		};
+
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					 "sdxc_d47_c", "sdxc_clk_c",
+					 "sdxc_cmd_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
+		pwm_c1_pins: pwm-c1 {
+			mux {
+				groups = "pwm_c1";
+				function = "pwm_c";
+				bias-disable;
+			};
+		};
+
+		pwm_d_pins: pwm-d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+				bias-disable;
+			};
+		};
+
+		uart_b0_pins: uart-b0 {
+			mux {
+				groups = "uart_tx_b0",
+				       "uart_rx_b0";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_b0_cts_rts_pins: uart-b0-cts-rts {
+			mux {
+				groups = "uart_cts_b0",
+				       "uart_rts_b0";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ahb_sram {
+	ao_arc_sram: ao-arc-sram@0 {
+		compatible = "amlogic,meson8b-ao-arc-sram";
+		reg = <0x0 0x8000>;
+		pool;
+	};
+
+	smp-sram@1ff80 {
+		compatible = "amlogic,meson8b-smp-sram";
+		reg = <0x1ff80 0x8>;
+	};
+};
+
+
+&efuse {
+	compatible = "amlogic,meson8b-efuse";
+	clocks = <&clkc CLKID_EFUSE>;
+	clock-names = "core";
+
+	temperature_calib: calib@1f4 {
+		/* only the upper two bytes are relevant */
+		reg = <0x1f4 0x4>;
+	};
+};
+
+&ethmac {
+	compatible = "amlogic,meson8b-dwmac", "snps,dwmac-3.70a", "snps,dwmac";
+
+	reg = <0xc9410000 0x10000
+	       0xc1108140 0x4>;
+
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+	rx-fifo-depth = <4096>;
+	tx-fifo-depth = <2048>;
+
+	resets = <&reset RESET_ETHERNET>;
+	reset-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson8b-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+	status = "okay";
+};
+
+&hhi {
+	clkc: clock-controller {
+		compatible = "amlogic,meson8b-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8b-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		resets = <&reset RESET_DBLK>,
+			 <&reset RESET_PIC_DC>,
+			 <&reset RESET_HDMI_APB>,
+			 <&reset RESET_HDMI_SYSTEM_RESET>,
+			 <&reset RESET_VENCI>,
+			 <&reset RESET_VENCP>,
+			 <&reset RESET_VDAC_4>,
+			 <&reset RESET_VENCL>,
+			 <&reset RESET_VIU>,
+			 <&reset RESET_VENC>,
+			 <&reset RESET_RDMA>;
+		reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system",
+			      "venci", "vencp", "vdac", "vencl", "viu",
+			      "venc", "rdma";
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <182142857>;
+	};
+};
+
+&hwrng {
+	compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&L2 {
+	arm,data-latency = <3 3 3>;
+	arm,tag-latency = <2 2 2>;
+	arm,filter-ranges = <0x100000 0xc0000000>;
+	prefetch-data = <1>;
+	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
+	arm,shared-override;
+};
+
+&periph {
+	scu@0 {
+		compatible = "arm,cortex-a5-scu";
+		reg = <0x0 0x100>;
+	};
+
+	timer@200 {
+		compatible = "arm,cortex-a5-global-timer";
+		reg = <0x200 0x20>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+
+		/*
+		 * the arm_global_timer driver currently does not handle clock
+		 * rate changes. Keep it disabled for now.
+		 */
+		status = "disabled";
+	};
+
+	timer@600 {
+		compatible = "arm,cortex-a5-twd-timer";
+		reg = <0x600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+	};
+};
+
+&pwm_ab {
+	compatible = "amlogic,meson8b-pwm";
+};
+
+&pwm_cd {
+	compatible = "amlogic,meson8b-pwm";
+};
+
+&rtc {
+	compatible = "amlogic,meson8b-rtc";
+	resets = <&reset RESET_RTC>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+	clock-names = "clkin", "core";
+	amlogic,hhi-sysctrl = <&hhi>;
+	nvmem-cells = <&temperature_calib>;
+	nvmem-cell-names = "temperature_calib";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
+&secbus {
+	secbus2: system-controller@4000 {
+		compatible = "amlogic,meson8b-secbus2", "syscon";
+		reg = <0x4000 0x2000>;
+	};
+};
+
+&sdio {
+	compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
+&timer_abcde {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk";
+};
+
+&uart_AO {
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&usb0 {
+	compatible = "amlogic,meson8b-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb1 {
+	compatible = "amlogic,meson8b-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&wdt {
+	compatible = "amlogic,meson8b-wdt";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts
new file mode 100644
index 0000000000000..aa4d4bf706296
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Oleg Ivanov <balbes-150@yandex.ru>
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+/dts-v1/;
+
+#include "meson8m2.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Tronsmart MXIII Plus";
+	compatible = "tronsmart,mxiii-plus", "amlogic,meson8m2";
+
+	aliases {
+		ethernet0 = &ethmac;
+		i2c0 = &i2c_AO;
+		serial0 = &uart_AO;
+		mmc0 = &sd_card_slot;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		pinctrl-0 = <&xtal_32k_out_pins>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>,
+			      <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>;
+
+		clocks = <&xtal_32k_out>;
+		clock-names = "ext_clock";
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	xtal_32k_out: xtal-32k-out-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32k_out";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii-id";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+			vcck: DCDC1 {
+				regulator-name = "VCCK";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddee: DCDC2 {
+				/* the output is also used as VDDAO */
+				regulator-name = "VDD_EE";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			DCDC3 {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "VDDIO_AO28";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddio_ao1v8: LDO2 {
+				regulator-name = "VDDIO_AO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "VCC1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "VCC2V8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "AVDD1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC1 {
+				regulator-name = "VDD_LDO";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC2 {
+				regulator-name = "RTC_0V9";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO wifi */
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_a_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	disable-wp;
+	non-removable;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+/* connected to the Bluetooth module */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8m2.dtsi b/arch/arm/boot/dts/amlogic/meson8m2.dtsi
new file mode 100644
index 0000000000000..6725dd9fd825c
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8m2.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+#include "meson8.dtsi"
+
+/ {
+	model = "Amlogic Meson8m2 SoC";
+	compatible = "amlogic,meson8m2";
+}; /* end of / */
+
+&clkc {
+	compatible = "amlogic,meson8m2-clkc", "amlogic,meson8-clkc";
+};
+
+&dmcbus {
+	/* the offset of the canvas registers has changed compared to Meson8 */
+	/delete-node/ video-lut@20;
+
+	canvas: video-lut@48 {
+		compatible = "amlogic,meson8m2-canvas", "amlogic,canvas";
+		reg = <0x48 0x14>;
+	};
+};
+
+&ethmac {
+	compatible = "amlogic,meson8m2-dwmac", "snps,dwmac";
+	reg = <0xc9410000 0x10000
+		0xc1108140 0x8>;
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+	resets = <&reset RESET_ETHERNET>;
+	reset-names = "stmmaceth";
+};
+
+&pinctrl_aobus {
+	compatible = "amlogic,meson8m2-aobus-pinctrl",
+		     "amlogic,meson8-aobus-pinctrl";
+};
+
+&pinctrl_cbus {
+	compatible = "amlogic,meson8m2-cbus-pinctrl",
+		     "amlogic,meson8-cbus-pinctrl";
+
+	eth_rgmii_pins: ethernet {
+		mux {
+			groups = "eth_tx_clk_50m", "eth_tx_en",
+				 "eth_txd3", "eth_txd2",
+				 "eth_txd1", "eth_txd0",
+				 "eth_rx_clk_in", "eth_rx_dv",
+				 "eth_rxd3", "eth_rxd2",
+				 "eth_rxd1", "eth_rxd0",
+				 "eth_mdio", "eth_mdc";
+			function = "ethernet";
+			bias-disable;
+		};
+	};
+};
+
+&pwrc {
+	compatible = "amlogic,meson8m2-pwrc";
+	resets = <&reset RESET_DBLK>,
+		 <&reset RESET_PIC_DC>,
+		 <&reset RESET_HDMI_APB>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_VENCI>,
+		 <&reset RESET_VENCP>,
+		 <&reset RESET_VDAC_4>,
+		 <&reset RESET_VENCL>,
+		 <&reset RESET_VIU>,
+		 <&reset RESET_VENC>,
+		 <&reset RESET_RDMA>;
+	reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system", "venci",
+		      "vencp", "vdac", "vencl", "viu", "venc", "rdma";
+	assigned-clocks = <&clkc CLKID_VPU>;
+	assigned-clock-rates = <364000000>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8m2-sdhc", "amlogic,meson-mx-sdhc";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
+};
+
+&wdt {
+	compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt";
+};
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
deleted file mode 100644
index 29936bfbeeb7e..0000000000000
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ /dev/null
@@ -1,195 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
- *
- *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-/dts-v1/;
-#include "at91sam9260.dtsi"
-
-/ {
-	model = "Somfy Animeo IP";
-	compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
-
-	aliases {
-		serial0 = &usart1;
-		serial1 = &usart2;
-		serial2 = &usart0;
-		serial3 = &dbgu;
-		serial4 = &usart3;
-		serial5 = &uart0;
-		serial6 = &uart1;
-	};
-
-	chosen {
-		stdout-path = &usart2;
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
-				linux,rs485-enabled-at-boot-time;
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
-				linux,rs485-enabled-at-boot-time;
-				status = "okay";
-			};
-
-			usart2: serial@fffb8000 {
-				pinctrl-0 = <&pinctrl_usart2>;
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
-				phy-mode = "mii";
-				status = "okay";
-			};
-
-			mmc0: mmc@fffa8000 {
-				pinctrl-0 = <&pinctrl_mmc0_clk
-					     &pinctrl_mmc0_slot1_cmd_dat0
-					     &pinctrl_mmc0_slot1_dat1_3>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				slot@1 {
-					reg = <1>;
-					bus-width = <4>;
-				};
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						barebox@0 {
-							label = "barebox";
-							reg = <0x0 0x58000>;
-						};
-
-						u_boot_env@58000 {
-							label = "u_boot_env";
-							reg = <0x58000 0x8000>;
-						};
-
-						ubi@60000 {
-							label = "ubi";
-							reg = <0x60000 0x1FA0000>;
-						};
-					};
-				};
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power_green {
-			label = "power_green";
-			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		power_red {
-			label = "power_red";
-			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		tx_green {
-			label = "tx_green";
-			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
-		};
-
-		tx_red {
-			label = "tx_red";
-			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-switch-in {
-			label = "keyswitch_in";
-			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <28>;
-			wakeup-source;
-		};
-
-		key-error-in {
-			label = "error_in";
-			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <29>;
-			wakeup-source;
-		};
-
-		key-s {
-			label = "btn";
-			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
-			linux,code = <31>;
-			wakeup-source;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
deleted file mode 100644
index e18769df9fd94..0000000000000
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "arm-realview-eb-11mp-ctrevb.dts"
-#include "arm-realview-eb-bbrevd.dtsi"
-
-/*
- * This is the EB with the new Revision D baseboard with SMSC9118 ethernet and
- * the Rev B core tile.
- */
-/ {
-	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Core Tile Rev B";
-};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
deleted file mode 100644
index 26b1c69e9f436..0000000000000
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "arm-realview-eb-11mp.dts"
-#include "arm-realview-eb-bbrevd.dtsi"
-
-/ {
-	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Rev C Core Tile";
-};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
deleted file mode 100644
index e68527b0d5522..0000000000000
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "arm-realview-eb-11mp.dts"
-
-/ {
-	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev B";
-};
-
-/*
- * The revision B has a distinctly different layout of the syscon, so
- * append a specific compatible-string.
- */
-&syscon {
-	compatible = "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon", "simple-mfd";
-};
-
-&intc {
-	reg = <0x10101000 0x1000>,
-	      <0x10100100 0x100>;
-};
-
-&L2 {
-	reg = <0x10102000 0x1000>;
-};
-
-&scu {
-	reg = <0x10100000 0x100>;
-};
-
-&twd_timer {
-	reg = <0x10100600 0x20>;
-};
-
-&twd_wdog {
-	reg = <0x10100620 0x20>;
-};
-
-/*
- * On revision B, we cannot reach the secondary interrupt
- * controller, as a result, some peripherals that are dependent
- * on their IRQ cannot be reached, so disable them.
- */
-&intc_second {
-	status = "disabled";
-};
-
-&gpio0 {
-	status = "disabled";
-};
-
-&gpio1 {
-	status = "disabled";
-};
-
-&gpio2 {
-	status = "disabled";
-};
-
-&serial2 {
-	status = "disabled";
-};
-
-&serial3 {
-	status = "disabled";
-};
-
-&ssp {
-	status = "disabled";
-};
-
-&wdog {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm-realview-eb-11mp.dts
deleted file mode 100644
index aac1edd4b2270..0000000000000
--- a/arch/arm/boot/dts/arm-realview-eb-11mp.dts
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "arm-realview-eb-mp.dtsi"
-
-/ {
-	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C Core Tile";
-	arm,hbi = <0x146>;
-
-	/*
-	 * This is the ARM11 MPCore tile (HBI-0146) used with the RealView EB.
-	 * Reference: ARM DUI 0318F
-	 *
-	 * To run this machine with QEMU, specify the following:
-	 * qemu-system-arm -M realview-eb-mpcore -smp cpus=4
-	 */
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "arm,realview-smp";
-
-		MP11_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		MP11_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		MP11_2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			reg = <2>;
-			next-level-cache = <&L2>;
-		};
-
-		MP11_3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			reg = <3>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
-
-&pmu {
-	interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
-};
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
deleted file mode 100644
index 42efac7496ef1..0000000000000
--- a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "arm-realview-eb-a9mp.dts"
-#include "arm-realview-eb-bbrevd.dtsi"
-
-/ {
-	model = "ARM RealView EB Baseboard Rev D Cortex A9 MPCore";
-};
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts b/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
deleted file mode 100644
index 967684b3636c1..0000000000000
--- a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "arm-realview-eb-mp.dtsi"
-
-/ {
-	model = "ARM RealView EB Cortex A9 MPCore";
-
-	/*
-	 * This is the Cortex A9 MPCore tile used with the
-	 * RealView EB.
-	 */
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "arm,realview-smp";
-
-		A9_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		A9_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		A9_2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <2>;
-			next-level-cache = <&L2>;
-		};
-
-		A9_3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <3>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
-
-&pmu {
-	interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
-};
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
deleted file mode 100644
index f533c8b49d97d..0000000000000
--- a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-/* This derives from the Realview Baseboard, and overlays the new ethernet */
-#include "arm-realview-eb.dts"
-#include "arm-realview-eb-bbrevd.dtsi"
-
-/ {
-	model = "ARM RealView Emulation Baseboard Rev D";
-};
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
deleted file mode 100644
index a79e1d1d30a7b..0000000000000
--- a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-/ {
-	/* Introduce a fixed regulator for the new ethernet controller */
-	veth: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "veth";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-};
-
-/*
- * The revision D has a different ethernet controller that the elder boards:
- * the older board uses LAN91C111 but the new one uses LAN9118.
- */
-&ethernet {
-	compatible = "smsc,lan9118", "smsc,lan9115";
-	phy-mode = "mii";
-	smsc,irq-active-high;
-	smsc,irq-push-pull;
-	vdd33a-supply = <&veth>;
-	vddvario-supply = <&veth>;
-};
diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
deleted file mode 100644
index 26783d053ac7f..0000000000000
--- a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "arm-realview-eb.dtsi"
-
-/*
- * This is the common include file for all MPCore variants of the
- * Evaluation Baseboard, i.e. ARM11MPCore, ARM11MPCore Revision B
- * and Cortex-A9 MPCore.
- */
-/ {
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,realview-eb-soc", "simple-bus";
-		regmap = <&syscon>;
-		ranges;
-
-		/* Primary interrupt controller in the test chip */
-		intc: interrupt-controller@1f000100 {
-			compatible = "arm,eb11mp-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0x1f001000 0x1000>,
-			      <0x1f000100 0x100>;
-		};
-
-		/* Secondary interrupt controller on the FPGA */
-		intc_second: interrupt-controller@10040000 {
-			compatible = "arm,pl390";
-			#interrupt-cells = <3>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0x10041000 0x1000>,
-			      <0x10040000 0x100>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		L2: cache-controller {
-			compatible = "arm,l220-cache";
-			reg = <0x1f002000 0x1000>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
-			cache-unified;
-			cache-level = <2>;
-			/*
-			 * Override default cache size, sets and
-			 * associativity as these may be erroneously set
-			 * up by boot loader(s), probably for safety
-			 * since th outer sync operation can cause the
-			 * cache to hang unless disabled.
-			 */
-			cache-size = <1048576>; // 1MB
-			cache-sets = <4096>;
-			cache-line-size = <32>;
-			arm,shared-override;
-			arm,parity-enable;
-			arm,outer-sync-disable;
-		};
-
-		scu: scu@1f000000 {
-			compatible = "arm,arm11mp-scu";
-			reg = <0x1f000000 0x100>;
-		};
-
-		twd_timer: timer@1f000600 {
-			compatible = "arm,arm11mp-twd-timer";
-			reg = <0x1f000600 0x20>;
-			interrupt-parent = <&intc>;
-			interrupts = <1 13 0xf04>;
-		};
-
-		twd_wdog: watchdog@1f000620 {
-			compatible = "arm,arm11mp-twd-wdt";
-			reg = <0x1f000620 0x20>;
-			interrupt-parent = <&intc>;
-			interrupts = <1 14 0xf04>;
-		};
-
-		/* PMU with one IRQ line per core */
-		pmu: pmu@0 {
-			compatible = "arm,arm11mpcore-pmu";
-			interrupt-parent = <&intc>;
-			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-};
-
-/*
- * This adapts all the peripherals to the interrupt routing
- * to the GIC on the core tile.
- */
-
-&ethernet {
-	interrupt-parent = <&intc>;
-	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usb {
-	interrupt-parent = <&intc>;
-	interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&aaci {
-	interrupt-parent = <&intc>;
-	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&mmc {
-	interrupt-parent = <&intc>;
-	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
-			<0 15 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&kmi0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&kmi1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer01 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer23 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&rtc {
-	interrupt-parent = <&intc>;
-	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-/*
- * On revision A, these peripherals does not have their IRQ lines
- * routed to the core tile, but they can be reached on the secondary
- * GIC.
- */
-&gpio0 {
-	interrupt-parent = <&intc_second>;
-	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio1 {
-	interrupt-parent = <&intc_second>;
-	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio2 {
-	interrupt-parent = <&intc_second>;
-	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial2 {
-	interrupt-parent = <&intc_second>;
-	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
-	status = "okay";
-};
-
-&serial3 {
-	interrupt-parent = <&intc_second>;
-	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
-	status = "okay";
-};
-
-&ssp {
-	interrupt-parent = <&intc_second>;
-	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-	status = "okay";
-};
-
-&wdog {
-	interrupt-parent = <&intc_second>;
-	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dts b/arch/arm/boot/dts/arm-realview-eb.dts
deleted file mode 100644
index 15431077f00cd..0000000000000
--- a/arch/arm/boot/dts/arm-realview-eb.dts
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "arm-realview-eb.dtsi"
-
-/ {
-	model = "ARM RealView Emulation Baseboard";
-	compatible = "arm,realview-eb";
-	arm,hbi = <0x140>;
-
-	/*
-	 * This is the core tile with the CPU and GIC etc for the
-	 * ARM926EJ-S, ARM1136, ARM1176 that does not have L2 cache
-	 * or PMU.
-	 *
-	 * To run this machine with QEMU, specify the following:
-	 * qemu-system-arm -M realview-eb
-	 * Unless specified, QEMU will emulate an ARM926EJ-S core tile.
-	 * Switches -cpu arm1136 or -cpu arm1176 emulates the other
-	 * core tiles.
-	 */
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,realview-eb-soc", "simple-bus";
-		regmap = <&syscon>;
-		ranges;
-
-		intc: interrupt-controller@10040000 {
-			compatible = "arm,pl390";
-			#interrupt-cells = <3>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0x10041000 0x1000>,
-			      <0x10040000 0x100>;
-		};
-	};
-};
-
-/*
- * This adapts all the peripherals to the interrupt routing
- * to the GIC on the core tile.
- */
-
-&ethernet {
-	interrupt-parent = <&intc>;
-	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usb {
-	interrupt-parent = <&intc>;
-	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&aaci {
-	interrupt-parent = <&intc>;
-	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&mmc {
-	interrupt-parent = <&intc>;
-	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
-			<0 18 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&kmi0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&kmi1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&charlcd {
-	interrupt-parent = <&intc>;
-	interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial2 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial3 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&ssp {
-	interrupt-parent = <&intc>;
-	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&wdog {
-	interrupt-parent = <&intc>;
-	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer01 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer23 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio2 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&rtc {
-	interrupt-parent = <&intc>;
-	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&clcd {
-	interrupt-parent = <&intc>;
-	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
deleted file mode 100644
index fbb2258b451f9..0000000000000
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ /dev/null
@@ -1,484 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "arm,realview-eb";
-
-	chosen { };
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		i2c0 = &i2c;
-	};
-
-	memory {
-		device_type = "memory";
-		/* 128 MiB memory @ 0x0 */
-		reg = <0x00000000 0x08000000>;
-	};
-
-	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-        };
-
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	timclk: timclk@1M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <24>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	flash0@40000000 {
-		/* 2 * 32MiB NOR Flash memory */
-		compatible = "arm,versatile-flash", "cfi-flash";
-		reg = <0x40000000 0x04000000>;
-		bank-width = <4>;
-		partitions {
-			compatible = "arm,arm-firmware-suite";
-		};
-	};
-
-	flash1@44000000 {
-		/* 2 * 32MiB NOR Flash memory */
-		compatible = "arm,versatile-flash", "cfi-flash";
-		reg = <0x44000000 0x04000000>;
-		bank-width = <4>;
-		partitions {
-			compatible = "arm,arm-firmware-suite";
-		};
-	};
-
-	/* SMSC LAN91C111 ethernet with PHY and EEPROM */
-	ethernet: ethernet@4e000000 {
-		compatible = "smsc,lan91c111";
-		reg = <0x4e000000 0x10000>;
-		/*
-		 * This means the adapter can be accessed with 8, 16 or
-		 * 32 bit reads/writes.
-		 */
-		reg-io-width = <7>;
-	};
-
-	usb: usb@4f000000 {
-		compatible = "nxp,usb-isp1761";
-		reg = <0x4f000000 0x20000>;
-		dr_mode = "peripheral";
-	};
-
-	bridge {
-		compatible = "ti,ths8134a", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				vga_bridge_in: endpoint {
-					remote-endpoint = <&clcd_pads>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				vga_bridge_out: endpoint {
-					remote-endpoint = <&vga_con_in>;
-				};
-			};
-		};
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_con_in: endpoint {
-				remote-endpoint = <&vga_bridge_out>;
-			};
-		};
-	};
-
-	/* These peripherals are inside the FPGA */
-	fpga {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		syscon: syscon@10000000 {
-			compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
-			reg = <0x10000000 0x1000>;
-			ranges = <0x0 0x10000000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			led@8,0 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x01>;
-				label = "versatile:0";
-				linux,default-trigger = "heartbeat";
-				default-state = "on";
-			};
-			led@8,1 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x02>;
-				label = "versatile:1";
-				linux,default-trigger = "mmc0";
-				default-state = "off";
-			};
-			led@8,2 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x04>;
-				label = "versatile:2";
-				linux,default-trigger = "cpu0";
-				default-state = "off";
-			};
-			led@8,3 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x08>;
-				label = "versatile:3";
-				default-state = "off";
-			};
-			led@8,4 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x10>;
-				label = "versatile:4";
-				default-state = "off";
-			};
-			led@8,5 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x20>;
-				label = "versatile:5";
-				default-state = "off";
-			};
-			led@8,6 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x40>;
-				label = "versatile:6";
-				default-state = "off";
-			};
-			led@8,7 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x80>;
-				label = "versatile:7";
-				default-state = "off";
-			};
-			oscclk0: clock-controller@c {
-				compatible = "arm,syscon-icst307";
-				reg = <0x0c 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x0C>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk1: clock-controller@10 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x10 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x10>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk2: clock-controller@14 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x14 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x14>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk3: clock-controller@18 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x18 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x18>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk4: clock-controller@1c {
-				compatible = "arm,syscon-icst307";
-				reg = <0x1c 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x1c>;
-				clocks = <&xtal24mhz>;
-			};
-		};
-
-		i2c: i2c@10002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "arm,versatile-i2c";
-			reg = <0x10002000 0x1000>;
-
-			rtc@68 {
-				compatible = "dallas,ds1338";
-				reg = <0x68>;
-			};
-		};
-
-		aaci: aaci@10004000 {
-			compatible = "arm,pl041", "arm,primecell";
-			reg = <0x10004000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		mmc: mmcsd@10005000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x10005000 0x1000>;
-
-			/* Due to frequent FIFO overruns, use just 500 kHz */
-			max-frequency = <500000>;
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			clocks = <&mclk>, <&pclk>;
-			clock-names = "mclk", "apb_pclk";
-			vmmc-supply = <&vmmc>;
-			cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-			wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		kmi0: kmi@10006000 {
-			compatible = "arm,pl050", "arm,primecell";
-			reg = <0x10006000 0x1000>;
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		kmi1: kmi@10007000 {
-			compatible = "arm,pl050", "arm,primecell";
-			reg = <0x10007000 0x1000>;
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		charlcd: fpga_charlcd: charlcd@10008000 {
-			compatible = "arm,versatile-lcd";
-			reg = <0x10008000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		serial0: serial@10009000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x10009000 0x1000>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		serial1: serial@1000a000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1000a000 0x1000>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		serial2: serial@1000b000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1000b000 0x1000>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		serial3: serial@1000c000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1000c000 0x1000>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		ssp: spi@1000d000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x1000d000 0x1000>;
-			clocks = <&sspclk>, <&pclk>;
-			clock-names = "sspclk", "apb_pclk";
-		};
-
-		wdog: watchdog@10010000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x10010000 0x1000>;
-			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdog_clk", "apb_pclk";
-			status = "disabled";
-		};
-
-		timer01: timer@10011000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10011000 0x1000>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timer1", "timer2", "apb_pclk";
-		};
-
-		timer23: timer@10012000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10012000 0x1000>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timer1", "timer2", "apb_pclk";
-		};
-
-		gpio0: gpio@10013000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10013000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio1: gpio@10014000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10014000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio2: gpio@10015000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10015000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		rtc: rtc@10017000 {
-			compatible = "arm,pl031", "arm,primecell";
-			reg = <0x10017000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		clcd: clcd@10020000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0x10020000 0x1000>;
-			interrupt-names = "combined";
-			clocks = <&oscclk0>, <&pclk>;
-			clock-names = "clcdclk", "apb_pclk";
-			/* 1024x768 16bpp @65MHz works fine */
-			max-memory-bandwidth = <95000000>;
-
-			port {
-				clcd_pads: endpoint {
-					remote-endpoint = <&vga_bridge_in>;
-					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
deleted file mode 100644
index efed325af88d2..0000000000000
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ /dev/null
@@ -1,608 +0,0 @@
-/*
- * Copyright 2014 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "ARM RealView PB1176";
-	compatible = "arm,realview-pb1176";
-
-	chosen { };
-
-	aliases {
-		serial0 = &pb1176_serial0;
-		serial1 = &pb1176_serial1;
-		serial2 = &pb1176_serial2;
-		serial3 = &pb1176_serial3;
-		serial4 = &fpga_serial;
-	};
-
-	memory {
-		device_type = "memory";
-		/* 128 MiB memory @ 0x0 */
-		reg = <0x00000000 0x08000000>;
-	};
-
-	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: regulator-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-        };
-
-	veth: regulator-veth {
-		compatible = "regulator-fixed";
-		regulator-name = "veth";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	timclk: timclk@1M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <24>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	flash@30000000 {
-		compatible = "arm,versatile-flash", "cfi-flash";
-		reg = <0x30000000 0x4000000>;
-		bank-width = <4>;
-		partitions {
-			compatible = "arm,arm-firmware-suite";
-		};
-	};
-
-	fpga_flash@38000000 {
-		compatible = "arm,versatile-flash", "cfi-flash";
-		reg = <0x38000000 0x800000>;
-		bank-width = <4>;
-		partitions {
-			compatible = "arm,arm-firmware-suite";
-		};
-	};
-
-	/*
-	 * The "secure flash" contains things like the boot
-	 * monitor so we don't want people to accidentally
-	 * screw this up. Mark the device tree node disabled
-	 * by default.
-	 */
-	secflash@3c000000 {
-		compatible = "arm,versatile-flash", "cfi-flash";
-		reg = <0x3c000000 0x4000000>;
-		bank-width = <4>;
-		status = "disabled";
-	};
-
-	/* SMSC 9118 ethernet with PHY and EEPROM */
-	ethernet@3a000000 {
-		compatible = "smsc,lan9118", "smsc,lan9115";
-		reg = <0x3a000000 0x10000>;
-		interrupt-parent = <&intc_fpga1176>;
-		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-		phy-mode = "mii";
-		reg-io-width = <4>;
-		smsc,irq-active-high;
-		smsc,irq-push-pull;
-		vdd33a-supply = <&veth>;
-		vddvario-supply = <&veth>;
-	};
-
-	usb@3b000000 {
-		compatible = "nxp,usb-isp1761";
-		reg = <0x3b000000 0x20000>;
-		interrupt-parent = <&intc_fpga1176>;
-		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-		dr_mode = "peripheral";
-	};
-
-	bridge {
-		compatible = "ti,ths8134a", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				vga_bridge_in: endpoint {
-					remote-endpoint = <&clcd_pads>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				vga_bridge_out: endpoint {
-					remote-endpoint = <&vga_con_in>;
-				};
-			};
-		};
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_con_in: endpoint {
-				remote-endpoint = <&vga_bridge_out>;
-			};
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,realview-pb1176-soc", "simple-bus";
-		regmap = <&syscon>;
-		ranges;
-
-		syscon: syscon@10000000 {
-			compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
-			reg = <0x10000000 0x1000>;
-			ranges = <0x0 0x10000000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			led@8,0 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x01>;
-				label = "versatile:0";
-				linux,default-trigger = "heartbeat";
-				default-state = "on";
-			};
-			led@8,1 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x02>;
-				label = "versatile:1";
-				linux,default-trigger = "mmc0";
-				default-state = "off";
-			};
-			led@8,2 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x04>;
-				label = "versatile:2";
-				linux,default-trigger = "cpu0";
-				default-state = "off";
-			};
-			led@8,3 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x08>;
-				label = "versatile:3";
-				default-state = "off";
-			};
-			led@8,4 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x10>;
-				label = "versatile:4";
-				default-state = "off";
-			};
-			led@8,5 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x20>;
-				label = "versatile:5";
-				default-state = "off";
-			};
-			led@8,6 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x40>;
-				label = "versatile:6";
-				default-state = "off";
-			};
-			led@8,7 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x80>;
-				label = "versatile:7";
-				default-state = "off";
-			};
-			oscclk0: clock-controller@c {
-				compatible = "arm,syscon-icst307";
-				reg = <0x0c 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x0C>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk1: clock-controller@10 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x10 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x10>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk2: clock-controller@14 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x14 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x14>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk3: clock-controller@18 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x18 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x18>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk4: clock-controller@1c {
-				compatible = "arm,syscon-icst307";
-				reg = <0x1c 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x1c>;
-				clocks = <&xtal24mhz>;
-			};
-		};
-
-		/* Primary DevChip GIC synthesized with the CPU */
-		intc_dc1176: interrupt-controller@10120000 {
-			compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0x10121000 0x1000>,
-			      <0x10120000 0x100>;
-		};
-
-		L2: cache-controller {
-			compatible = "arm,l220-cache";
-			reg = <0x10110000 0x1000>;
-			interrupt-parent = <&intc_dc1176>;
-			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
-			cache-unified;
-			cache-level = <2>;
-			/*
-			 * Override default cache size, sets and
-			 * associativity as these may be erroneously set
-			 * up by boot loader(s).
-			 */
-			arm,override-auxreg;
-			cache-size = <131072>; // 128kB
-			cache-sets = <512>;
-			cache-line-size = <32>;
-		};
-
-		pmu {
-			compatible = "arm,arm1176-pmu";
-			interrupt-parent = <&intc_dc1176>;
-			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		timer01: timer@10104000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10104000 0x1000>;
-			interrupt-parent = <&intc_dc1176>;
-			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timer1", "timer2", "apb_pclk";
-		};
-
-		timer23: timer@10105000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10105000 0x1000>;
-			interrupt-parent = <&intc_dc1176>;
-			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-			arm,sp804-has-irq = <1>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timer1", "timer2", "apb_pclk";
-		};
-
-		pb1176_rtc: rtc@10108000 {
-			compatible = "arm,pl031", "arm,primecell";
-			reg = <0x10108000 0x1000>;
-			interrupt-parent = <&intc_dc1176>;
-			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		pb1176_gpio0: gpio@1010a000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x1010a000 0x1000>;
-			gpio-controller;
-			interrupt-parent = <&intc_dc1176>;
-			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		pb1176_ssp: spi@1010b000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x1010b000 0x1000>;
-			interrupt-parent = <&intc_dc1176>;
-			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sspclk>, <&pclk>;
-			clock-names = "sspclk", "apb_pclk";
-		};
-
-		pb1176_serial0: serial@1010c000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1010c000 0x1000>;
-			interrupt-parent = <&intc_dc1176>;
-			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		pb1176_serial1: serial@1010d000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1010d000 0x1000>;
-			interrupt-parent = <&intc_dc1176>;
-			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		pb1176_serial2: serial@1010e000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1010e000 0x1000>;
-			interrupt-parent = <&intc_dc1176>;
-			interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		pb1176_serial3: serial@1010f000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1010f000 0x1000>;
-			interrupt-parent = <&intc_dc1176>;
-			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		/* Direct-mapped development chip ROM */
-		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
-			reg = <0x10200000 0x4000>;
-			bank-width = <1>;
-		};
-
-		clcd@10112000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0x10112000 0x1000>;
-			interrupt-parent = <&intc_dc1176>;
-			interrupt-names = "combined";
-			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&oscclk0>, <&pclk>;
-			clock-names = "clcdclk", "apb_pclk";
-			/* 1024x768 16bpp @65MHz works fine */
-			max-memory-bandwidth = <95000000>;
-
-			port {
-				clcd_pads: endpoint {
-					remote-endpoint = <&vga_bridge_in>;
-					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-				};
-			};
-		};
-	};
-
-	/* These peripherals are inside the FPGA rather than the DevChip */
-	fpga {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		i2c0: i2c@10002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "arm,versatile-i2c";
-			reg = <0x10002000 0x1000>;
-
-			rtc@68 {
-				compatible = "dallas,ds1338";
-				reg = <0x68>;
-			};
-		};
-
-		fpga_aaci: aaci@10004000 {
-			compatible = "arm,pl041", "arm,primecell";
-			reg = <0x10004000 0x1000>;
-			interrupt-parent = <&intc_fpga1176>;
-			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		fpga_mci: mmcsd@10005000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x10005000 0x1000>;
-			interrupt-parent = <&intc_fpga1176>;
-			interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>,
-					<0 2 IRQ_TYPE_LEVEL_HIGH>;
-			/* Due to frequent FIFO overruns, use just 500 kHz */
-			max-frequency = <500000>;
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			clocks = <&mclk>, <&pclk>;
-			clock-names = "mclk", "apb_pclk";
-			vmmc-supply = <&vmmc>;
-			cd-gpios = <&fpga_gpio1 0 GPIO_ACTIVE_LOW>;
-			wp-gpios = <&fpga_gpio1 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		fpga_kmi0: kmi@10006000 {
-			compatible = "arm,pl050", "arm,primecell";
-			reg = <0x10006000 0x1000>;
-			interrupt-parent = <&intc_fpga1176>;
-			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		fpga_kmi1: kmi@10007000 {
-			compatible = "arm,pl050", "arm,primecell";
-			reg = <0x10007000 0x1000>;
-			interrupt-parent = <&intc_fpga1176>;
-			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		fpga_charlcd: charlcd@10008000 {
-			compatible = "arm,versatile-lcd";
-			reg = <0x10008000 0x1000>;
-			interrupt-parent = <&intc_fpga1176>;
-			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		fpga_serial: serial@10009000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x10009000 0x1000>;
-			interrupt-parent = <&intc_fpga1176>;
-			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		/* This GIC on the board is cascaded off the DevChip GIC */
-		intc_fpga1176: interrupt-controller@10040000 {
-			compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0x10041000 0x1000>,
-			      <0x10040000 0x100>;
-			interrupt-parent = <&intc_dc1176>;
-			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		fpga_gpio0: gpio@10014000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10014000 0x1000>;
-			gpio-controller;
-			interrupt-parent = <&intc_fpga1176>;
-			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		fpga_gpio1: gpio@10015000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10015000 0x1000>;
-			gpio-controller;
-			interrupt-parent = <&intc_fpga1176>;
-			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		fpga_rtc: rtc@10017000 {
-			compatible = "arm,pl031", "arm,primecell";
-			reg = <0x10017000 0x1000>;
-			interrupt-parent = <&intc_fpga1176>;
-			interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
deleted file mode 100644
index 89103d54ecc15..0000000000000
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ /dev/null
@@ -1,736 +0,0 @@
-/*
- * Copyright 2015 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "ARM RealView PB11MPcore";
-	compatible = "arm,realview-pb11mp";
-
-	chosen { };
-
-	aliases {
-		serial0 = &pb11mp_serial0;
-		serial1 = &pb11mp_serial1;
-		serial2 = &pb11mp_serial2;
-		serial3 = &pb11mp_serial3;
-	};
-
-	memory {
-		device_type = "memory";
-		/*
-		 * The PB11MPCore has 512 MiB memory @ 0x70000000
-		 * and the first 256 are also remapped @ 0x00000000
-		 */
-		reg = <0x70000000 0x20000000>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "arm,realview-smp";
-
-		MP11_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		MP11_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		MP11_2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			reg = <2>;
-			next-level-cache = <&L2>;
-		};
-
-		MP11_3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			reg = <3>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	/* Primary TestChip GIC synthesized with the CPU */
-	intc_tc11mp: interrupt-controller@1f000100 {
-		compatible = "arm,tc11mp-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <1>;
-		interrupt-controller;
-		reg = <0x1f001000 0x1000>,
-		      <0x1f000100 0x100>;
-	};
-
-	L2: cache-controller {
-		compatible = "arm,l220-cache";
-		reg = <0x1f002000 0x1000>;
-		interrupt-parent = <&intc_tc11mp>;
-		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
-		cache-unified;
-		cache-level = <2>;
-		/*
-		 * Override default cache size, sets and
-		 * associativity as these may be erroneously set
-		 * up by boot loader(s), probably for safety
-		 * since th outer sync operation can cause the
-		 * cache to hang unless disabled.
-		 */
-		cache-size = <1048576>; // 1MB
-		cache-sets = <4096>;
-		cache-line-size = <32>;
-		arm,shared-override;
-		arm,parity-enable;
-		arm,outer-sync-disable;
-	};
-
-	scu@1f000000 {
-		compatible = "arm,arm11mp-scu";
-		reg = <0x1f000000 0x100>;
-	};
-
-	timer@1f000600 {
-		compatible = "arm,arm11mp-twd-timer";
-		reg = <0x1f000600 0x20>;
-		interrupt-parent = <&intc_tc11mp>;
-		interrupts = <1 13 0xf04>;
-	};
-
-	watchdog@1f000620 {
-		compatible = "arm,arm11mp-twd-wdt";
-		reg = <0x1f000620 0x20>;
-		interrupt-parent = <&intc_tc11mp>;
-		interrupts = <1 14 0xf04>;
-	};
-
-	/* PMU with one IRQ line per core */
-	pmu {
-		compatible = "arm,arm11mpcore-pmu";
-		interrupt-parent = <&intc_tc11mp>;
-		interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
-	};
-
-	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: regulator-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-        };
-
-	veth: regulator-veth {
-		compatible = "regulator-fixed";
-		regulator-name = "veth";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	refclk32khz: refclk32khz {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-
-	timclk: timclk@1M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <24>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	flash0@40000000 {
-		/* 2 * 32MiB NOR Flash memory */
-		compatible = "arm,versatile-flash", "cfi-flash";
-		reg = <0x40000000 0x04000000>;
-		bank-width = <4>;
-		partitions {
-			compatible = "arm,arm-firmware-suite";
-		};
-	};
-
-	flash1@44000000 {
-		// 2 * 32MiB NOR Flash memory
-		compatible = "arm,versatile-flash", "cfi-flash";
-		reg = <0x44000000 0x04000000>;
-		bank-width = <4>;
-		partitions {
-			compatible = "arm,arm-firmware-suite";
-		};
-	};
-
-	bridge {
-		compatible = "ti,ths8134a", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				vga_bridge_in: endpoint {
-					remote-endpoint = <&clcd_pads>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				vga_bridge_out: endpoint {
-					remote-endpoint = <&vga_con_in>;
-				};
-			};
-		};
-	};
-
-	vga {
-		/*
-		 * This DDC I2C is connected directly to the DVI portions
-		 * of the connector, so it's not really working when the
-		 * monitor is connected to the VGA connector.
-		 */
-		compatible = "vga-connector";
-		ddc-i2c-bus = <&i2c1>;
-
-		port {
-			vga_con_in: endpoint {
-				remote-endpoint = <&vga_bridge_out>;
-			};
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,realview-pb11mp-soc", "simple-bus";
-		regmap = <&pb11mp_syscon>;
-		ranges;
-
-		pb11mp_syscon: syscon@10000000 {
-			compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
-			reg = <0x10000000 0x1000>;
-			ranges = <0x0 0x10000000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			led@8,0 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x01>;
-				label = "versatile:0";
-				linux,default-trigger = "heartbeat";
-				default-state = "on";
-			};
-			led@8,1 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x02>;
-				label = "versatile:1";
-				linux,default-trigger = "mmc0";
-				default-state = "off";
-			};
-			led@8,2 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x04>;
-				label = "versatile:2";
-				linux,default-trigger = "cpu0";
-				default-state = "off";
-			};
-			led@8,3 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x08>;
-				label = "versatile:3";
-				linux,default-trigger = "cpu1";
-				default-state = "off";
-			};
-			led@8,4 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x10>;
-				label = "versatile:4";
-				linux,default-trigger = "cpu2";
-				default-state = "off";
-			};
-			led@8,5 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x20>;
-				label = "versatile:5";
-				linux,default-trigger = "cpu3";
-				default-state = "off";
-			};
-			led@8,6 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x40>;
-				label = "versatile:6";
-				default-state = "off";
-			};
-			led@8,7 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x80>;
-				label = "versatile:7";
-				default-state = "off";
-			};
-
-			oscclk0: clock-controller@c {
-				compatible = "arm,syscon-icst307";
-				reg = <0x0c 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x0C>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk1: clock-controller@10 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x10 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x10>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk2: clock-controller@14 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x14 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x14>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk3: clock-controller@18 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x18 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x18>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk4: clock-controller@1c {
-				compatible = "arm,syscon-icst307";
-				reg = <0x1c 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x1c>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk5: clock-controller@d4 {
-				compatible = "arm,syscon-icst307";
-				reg = <0xd4 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0xd4>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk6: clock-controller@d8 {
-				compatible = "arm,syscon-icst307";
-				reg = <0xd8 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0xd8>;
-				clocks = <&xtal24mhz>;
-			};
-		};
-
-		sp810_syscon: sysctl@10001000 {
-			compatible = "arm,sp810", "arm,primecell";
-			reg = <0x10001000 0x1000>;
-			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
-			clock-names = "refclk", "timclk", "apb_pclk";
-			#clock-cells = <1>;
-			clock-output-names = "timerclk0",
-					     "timerclk1",
-					     "timerclk2",
-					     "timerclk3";
-			assigned-clocks = <&sp810_syscon 0>,
-					  <&sp810_syscon 1>,
-					  <&sp810_syscon 2>,
-					  <&sp810_syscon 3>;
-			assigned-clock-parents = <&timclk>,
-					       <&timclk>,
-					       <&timclk>,
-					       <&timclk>;
-		};
-
-		i2c0: i2c@10002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "arm,versatile-i2c";
-			reg = <0x10002000 0x1000>;
-
-			rtc@68 {
-				compatible = "dallas,ds1338";
-				reg = <0x68>;
-			};
-		};
-
-		aaci: aaci@10004000 {
-			compatible = "arm,pl041", "arm,primecell";
-			reg = <0x10004000 0x1000>;
-			interrupt-parent = <&intc_tc11mp>;
-			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		mci: mmcsd@10005000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x10005000 0x1000>;
-			interrupt-parent = <&intc_tc11mp>;
-			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
-					<0 15 IRQ_TYPE_LEVEL_HIGH>;
-			/* Due to frequent FIFO overruns, use just 500 kHz */
-			max-frequency = <500000>;
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			clocks = <&mclk>, <&pclk>;
-			clock-names = "mclk", "apb_pclk";
-			vmmc-supply = <&vmmc>;
-			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		kmi0: kmi@10006000 {
-			compatible = "arm,pl050", "arm,primecell";
-			reg = <0x10006000 0x1000>;
-			interrupt-parent = <&intc_tc11mp>;
-			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		kmi1: kmi@10007000 {
-			compatible = "arm,pl050", "arm,primecell";
-			reg = <0x10007000 0x1000>;
-			interrupt-parent = <&intc_tc11mp>;
-			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		pb11mp_serial0: serial@10009000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x10009000 0x1000>;
-			interrupt-parent = <&intc_tc11mp>;
-			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		pb11mp_serial1: serial@1000a000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1000a000 0x1000>;
-			interrupt-parent = <&intc_tc11mp>;
-			interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		pb11mp_serial2: serial@1000b000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1000b000 0x1000>;
-			interrupt-parent = <&intc_pb11mp>;
-			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		pb11mp_serial3: serial@1000c000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1000c000 0x1000>;
-			interrupt-parent = <&intc_pb11mp>;
-			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		spi@1000d000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x1000d000 0x1000>;
-			interrupt-parent = <&intc_pb11mp>;
-			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sspclk>, <&pclk>;
-			clock-names = "sspclk", "apb_pclk";
-		};
-
-		watchdog@1000f000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x1000f000 0x1000>;
-			interrupt-parent = <&intc_pb11mp>;
-			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdog_clk", "apb_pclk";
-			status = "disabled";
-		};
-
-		watchdog@10010000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x10010000 0x1000>;
-			interrupt-parent = <&intc_pb11mp>;
-			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdog_clk", "apb_pclk";
-		};
-
-		timer01: timer@10011000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10011000 0x1000>;
-			interrupt-parent = <&intc_tc11mp>;
-			interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
-			arm,sp804-has-irq = <1>;
-			clocks = <&sp810_syscon 0>,
-			         <&sp810_syscon 1>,
-				 <&pclk>;
-			clock-names = "timer0clk",
-				    "timer1clk",
-				    "apb_pclk";
-		};
-
-		timer23: timer@10012000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10012000 0x1000>;
-			interrupt-parent = <&intc_tc11mp>;
-			interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
-			arm,sp804-has-irq = <1>;
-			clocks = <&sp810_syscon 2>,
-			         <&sp810_syscon 3>,
-				 <&pclk>;
-			clock-names = "timer0clk",
-				    "timer1clk",
-				    "apb_pclk";
-		};
-
-		gpio0: gpio@10013000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10013000 0x1000>;
-			gpio-controller;
-			interrupt-parent = <&intc_pb11mp>;
-			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio1: gpio@10014000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10014000 0x1000>;
-			gpio-controller;
-			interrupt-parent = <&intc_pb11mp>;
-			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio2: gpio@10015000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10015000 0x1000>;
-			gpio-controller;
-			interrupt-parent = <&intc_pb11mp>;
-			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		i2c1: i2c@10016000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "arm,versatile-i2c";
-			reg = <0x10016000 0x1000>;
-		};
-
-		rtc: rtc@10017000 {
-			compatible = "arm,pl031", "arm,primecell";
-			reg = <0x10017000 0x1000>;
-			interrupt-parent = <&intc_tc11mp>;
-			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		timer45: timer@10018000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10018000 0x1000>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timer0clk", "timer1clk", "apb_pclk";
-			status = "disabled";
-		};
-
-		timer67: timer@10019000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10019000 0x1000>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timer0clk", "timer1clk", "apb_pclk";
-			status = "disabled";
-		};
-
-
-		clcd@10020000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0x10020000 0x1000>;
-			interrupt-parent = <&intc_pb11mp>;
-			interrupt-names = "combined";
-			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&oscclk4>, <&pclk>;
-			clock-names = "clcdclk", "apb_pclk";
-			/* 1024x768 16bpp @65MHz works fine */
-			max-memory-bandwidth = <95000000>;
-
-			port {
-				clcd_pads: endpoint {
-					remote-endpoint = <&vga_bridge_in>;
-					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-				};
-			};
-		};
-
-		/*
-		 * This GIC on the Platform Baseboard is cascaded off the
-		 * TestChip GIC
-		 */
-		intc_pb11mp: interrupt-controller@1e000000 {
-			compatible = "arm,arm11mp-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0x1e001000 0x1000>,
-			      <0x1e000000 0x100>;
-			interrupt-parent = <&intc_tc11mp>;
-			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		/* SMSC 9118 ethernet with PHY and EEPROM */
-		ethernet@4e000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <0x4e000000 0x10000>;
-			interrupt-parent = <&intc_tc11mp>;
-			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-			vdd33a-supply = <&veth>;
-			vddvario-supply = <&veth>;
-		};
-
-		usb@4f000000 {
-			compatible = "nxp,usb-isp1761";
-			reg = <0x4f000000 0x20000>;
-			interrupt-parent = <&intc_tc11mp>;
-			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "peripheral";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/arm-realview-pba8.dts b/arch/arm/boot/dts/arm-realview-pba8.dts
deleted file mode 100644
index d3238c252b597..0000000000000
--- a/arch/arm/boot/dts/arm-realview-pba8.dts
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "arm-realview-pbx.dtsi"
-
-/ {
-	model = "ARM RealView Platform Baseboard for Cortex-A8";
-	compatible = "arm,realview-pba8";
-	arm,hbi = <0x178>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "arm,realview-smp";
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0>;
-		};
-	};
-
-	pmu: pmu@0 {
-		compatible = "arm,cortex-a8-pmu";
-		interrupt-parent = <&intc>;
-		interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>;
-	};
-
-	/* Primary GIC PL390 interrupt controller in the test chip */
-	intc: interrupt-controller@1e000000 {
-		compatible = "arm,pl390";
-		#interrupt-cells = <3>;
-		#address-cells = <1>;
-		interrupt-controller;
-		reg = <0x1e001000 0x1000>,
-		      <0x1e000000 0x100>;
-	};
-};
-
-&ethernet {
-	interrupt-parent = <&intc>;
-	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usb {
-	interrupt-parent = <&intc>;
-	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&soc {
-	compatible = "arm,realview-pba8-soc", "simple-bus";
-};
-
-&syscon {
-	compatible = "arm,realview-pba8-syscon", "syscon", "simple-mfd";
-};
-
-&serial0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial2 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial3 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&ssp {
-	interrupt-parent = <&intc>;
-	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&wdog0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&wdog1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer01 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer23 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio2 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&rtc {
-	interrupt-parent = <&intc>;
-	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer45 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer67 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&aaci {
-	interrupt-parent = <&intc>;
-	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&mmc {
-	interrupt-parent = <&intc>;
-	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 18 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&kmi0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&kmi1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&clcd {
-	interrupt-parent = <&intc>;
-	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm-realview-pbx-a9.dts
deleted file mode 100644
index 85d3968fbb917..0000000000000
--- a/arch/arm/boot/dts/arm-realview-pbx-a9.dts
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "arm-realview-pbx.dtsi"
-
-/ {
-	/*
-	 * This is the RealView Platform Baseboard Explore for Cortex-A9
-	 * (HBI0182 + HBI0183) as described in ARM DUI 0440B
-	 */
-	model = "ARM RealView Platform Baseboard Explore for Cortex-A9";
-	arm,hbi = <0x182>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "arm,realview-smp";
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-				core1 {
-					cpu = <&CPU1>;
-				};
-			};
-		};
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	L2: cache-controller {
-		compatible = "arm,pl310-cache";
-		reg = <0x1f002000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-		/*
-		 * Override default cache size, sets and
-		 * associativity as these may be erroneously set
-		 * up by boot loader(s).
-		 */
-		cache-size = <131072>; // 128KB
-		cache-sets = <512>;
-		cache-line-size = <32>;
-		arm,parity-disable;
-		arm,tag-latency = <1 1 1>;
-		arm,data-latency = <1 1 1>;
-	};
-
-	scu: scu@1f000000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x1f000000 0x100>;
-	};
-
-	twd_timer: timer@1f000600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x1f000600 0x20>;
-		interrupt-parent = <&intc>;
-		interrupts = <1 13 0xf04>;
-	};
-
-	twd_wdog: watchdog@1f000620 {
-		compatible = "arm,cortex-a9-twd-wdt";
-		reg = <0x1f000620 0x20>;
-		interrupt-parent = <&intc>;
-		interrupts = <1 14 0xf04>;
-	};
-
-	pmu: pmu@0 {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&intc>;
-		interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 45 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&CPU0>, <&CPU1>;
-	};
-
-	/* Primary GIC PL390 interrupt controller in the test chip */
-	intc: interrupt-controller@1f000000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <1>;
-		interrupt-controller;
-		reg = <0x1f001000 0x1000>,
-		      <0x1f000100 0x100>;
-	};
-};
-
-&ethernet {
-	interrupt-parent = <&intc>;
-	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usb {
-	interrupt-parent = <&intc>;
-	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial2 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial3 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&ssp {
-	interrupt-parent = <&intc>;
-	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&wdog0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&wdog1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer01 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer23 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio2 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&rtc {
-	interrupt-parent = <&intc>;
-	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer45 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer67 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&aaci {
-	interrupt-parent = <&intc>;
-	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&mmc {
-	interrupt-parent = <&intc>;
-	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 18 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&kmi0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&kmi1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&clcd {
-	interrupt-parent = <&intc>;
-	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
deleted file mode 100644
index ec1507c5147c6..0000000000000
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ /dev/null
@@ -1,593 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "arm,realview-pbx";
-
-	chosen { };
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-	};
-
-	memory {
-		device_type = "memory";
-		/* 128 MiB memory @ 0x0 */
-		reg = <0x00000000 0x08000000>;
-	};
-
-	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: regulator-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-        };
-
-	veth: regulator-veth {
-		compatible = "regulator-fixed";
-		regulator-name = "veth";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	refclk32khz: refclk32khz {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	timclk: timclk@1M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <24>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	flash0@40000000 {
-		/* 2 * 32MiB NOR Flash memory */
-		compatible = "arm,versatile-flash", "cfi-flash";
-		reg = <0x40000000 0x04000000>;
-		bank-width = <4>;
-		partitions {
-			compatible = "arm,arm-firmware-suite";
-		};
-	};
-
-	flash1@44000000 {
-		/* 2 * 32MiB NOR Flash memory */
-		compatible = "arm,versatile-flash", "cfi-flash";
-		reg = <0x44000000 0x04000000>;
-		bank-width = <4>;
-		partitions {
-			compatible = "arm,arm-firmware-suite";
-		};
-	};
-
-	/* SMSC 9118 ethernet with PHY and EEPROM */
-	ethernet: ethernet@4e000000 {
-		compatible = "smsc,lan9118", "smsc,lan9115";
-		reg = <0x4e000000 0x10000>;
-		phy-mode = "mii";
-		reg-io-width = <4>;
-		smsc,irq-active-high;
-		smsc,irq-push-pull;
-		vdd33a-supply = <&veth>;
-		vddvario-supply = <&veth>;
-	};
-
-	usb: usb@4f000000 {
-		compatible = "nxp,usb-isp1761";
-		reg = <0x4f000000 0x20000>;
-		dr_mode = "peripheral";
-	};
-
-	bridge {
-		compatible = "ti,ths8134a", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				vga_bridge_in: endpoint {
-					remote-endpoint = <&clcd_pads>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				vga_bridge_out: endpoint {
-					remote-endpoint = <&vga_con_in>;
-				};
-			};
-		};
-	};
-
-	vga {
-		/*
-		 * This DDC I2C is connected directly to the DVI portions
-		 * of the connector, so it's not really working when the
-		 * monitor is connected to the VGA connector.
-		 */
-		compatible = "vga-connector";
-		ddc-i2c-bus = <&i2c1>;
-
-		port {
-			vga_con_in: endpoint {
-				remote-endpoint = <&vga_bridge_out>;
-			};
-		};
-	};
-
-	soc: soc {
-		compatible = "arm,realview-pbx-soc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		regmap = <&syscon>;
-		ranges;
-
-		syscon: syscon@10000000 {
-			compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
-			reg = <0x10000000 0x1000>;
-			ranges = <0x0 0x10000000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			led@8,0 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x01>;
-				label = "versatile:0";
-				linux,default-trigger = "heartbeat";
-				default-state = "on";
-			};
-			led@8,1 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x02>;
-				label = "versatile:1";
-				linux,default-trigger = "mmc0";
-				default-state = "off";
-			};
-			led@8,2 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x04>;
-				label = "versatile:2";
-				linux,default-trigger = "cpu0";
-				default-state = "off";
-			};
-			led@8,3 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x08>;
-				label = "versatile:3";
-				default-state = "off";
-			};
-			led@8,4 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x10>;
-				label = "versatile:4";
-				default-state = "off";
-			};
-			led@8,5 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x20>;
-				label = "versatile:5";
-				default-state = "off";
-			};
-			led@8,6 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x40>;
-				label = "versatile:6";
-				default-state = "off";
-			};
-			led@8,7 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x80>;
-				label = "versatile:7";
-				default-state = "off";
-			};
-			oscclk0: clock-controller@c {
-				compatible = "arm,syscon-icst307";
-				reg = <0x0c 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x0C>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk1: clock-controller@10 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x10 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x10>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk2: clock-controller@14 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x14 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x14>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk3: clock-controller@18 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x18 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x18>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk4: clock-controller@1c {
-				compatible = "arm,syscon-icst307";
-				reg = <0x1c 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x1c>;
-				clocks = <&xtal24mhz>;
-			};
-		};
-
-		sp810_syscon0: sysctl@10001000 {
-			compatible = "arm,sp810", "arm,primecell";
-			reg = <0x10001000 0x1000>;
-			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
-			clock-names = "refclk", "timclk", "apb_pclk";
-			#clock-cells = <1>;
-			clock-output-names = "timerclk0",
-					     "timerclk1",
-					     "timerclk2",
-					     "timerclk3";
-			assigned-clocks = <&sp810_syscon0 0>,
-					  <&sp810_syscon0 1>,
-					  <&sp810_syscon0 2>,
-					  <&sp810_syscon0 3>;
-			assigned-clock-parents = <&timclk>,
-					       <&timclk>,
-					       <&timclk>,
-					       <&timclk>;
-		};
-
-		i2c0: i2c@10002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "arm,versatile-i2c";
-			reg = <0x10002000 0x1000>;
-
-			rtc@68 {
-				compatible = "dallas,ds1338";
-				reg = <0x68>;
-			};
-		};
-
-		serial0: serial@10009000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x10009000 0x1000>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		serial1: serial@1000a000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1000a000 0x1000>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		serial2: serial@1000b000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1000b000 0x1000>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		ssp: spi@1000d000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x1000d000 0x1000>;
-			clocks = <&sspclk>, <&pclk>;
-			clock-names = "sspclk", "apb_pclk";
-		};
-
-		wdog0: watchdog@1000f000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x1000f000 0x1000>;
-			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdog_clk", "apb_pclk";
-			status = "disabled";
-		};
-
-		wdog1: watchdog@10010000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x10010000 0x1000>;
-			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdog_clk", "apb_pclk";
-			status = "disabled";
-		};
-
-		timer01: timer@10011000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10011000 0x1000>;
-			clocks = <&sp810_syscon0 0>,
-			         <&sp810_syscon0 1>,
-				 <&pclk>;
-			clock-names = "timerclk0",
-				    "timerclk1",
-				    "apb_pclk";
-		};
-
-		timer23: timer@10012000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10012000 0x1000>;
-			clocks = <&sp810_syscon0 2>,
-			         <&sp810_syscon0 3>,
-				 <&pclk>;
-			clock-names = "timerclk2",
-				    "timerclk3",
-				    "apb_pclk";
-		};
-
-		gpio0: gpio@10013000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10013000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio1: gpio@10014000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10014000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio2: gpio@10015000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10015000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		i2c1: i2c@10016000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "arm,versatile-i2c";
-			reg = <0x10016000 0x1000>;
-		};
-
-		rtc: rtc@10017000 {
-			compatible = "arm,pl031", "arm,primecell";
-			reg = <0x10017000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		timer45: timer@10018000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10018000 0x1000>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timerclk4", "timerclk5", "apb_pclk";
-		};
-
-		timer67: timer@10019000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10019000 0x1000>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timerclk6", "timerclk7", "apb_pclk";
-		};
-
-		sp810_syscon1: sysctl@1001a000 {
-			compatible = "arm,sp810", "arm,primecell";
-			reg = <0x1001a000 0x1000>;
-			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
-			clock-names = "refclk", "timclk", "apb_pclk";
-			#clock-cells = <1>;
-			clock-output-names = "timerclk4",
-					     "timerclk5",
-					     "timerclk6",
-					     "timerclk7";
-			assigned-clocks = <&sp810_syscon1 0>,
-					  <&sp810_syscon1 1>,
-					  <&sp810_syscon1 2>,
-					  <&sp810_syscon1 3>;
-			assigned-clock-parents = <&timclk>,
-					       <&timclk>,
-					       <&timclk>,
-					       <&timclk>;
-		};
-	};
-
-
-	/* These peripherals are inside the FPGA */
-	fpga {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		aaci: aaci@10004000 {
-			compatible = "arm,pl041", "arm,primecell";
-			reg = <0x10004000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		mmc: mmcsd@10005000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x10005000 0x1000>;
-
-			/* Due to frequent FIFO overruns, use just 500 kHz */
-			max-frequency = <500000>;
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			clocks = <&mclk>, <&pclk>;
-			clock-names = "mclk", "apb_pclk";
-			vmmc-supply = <&vmmc>;
-			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		kmi0: kmi@10006000 {
-			compatible = "arm,pl050", "arm,primecell";
-			reg = <0x10006000 0x1000>;
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		kmi1: kmi@10007000 {
-			compatible = "arm,pl050", "arm,primecell";
-			reg = <0x10007000 0x1000>;
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		serial3: serial@1000c000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1000c000 0x1000>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-	};
-
-	/* These peripherals are inside the NEC ISSP */
-	issp {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		clcd: clcd@10020000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0x10020000 0x1000>;
-			interrupt-names = "combined";
-			clocks = <&oscclk4>, <&pclk>;
-			clock-names = "clcdclk", "apb_pclk";
-			/* 1024x768 16bpp @65MHz works fine */
-			max-memory-bandwidth = <95000000>;
-
-			port {
-				clcd_pads: endpoint {
-					remote-endpoint = <&vga_bridge_in>;
-					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/arm/Makefile b/arch/arm/boot/dts/arm/Makefile
new file mode 100644
index 0000000000000..07ebb64e2cd01
--- /dev/null
+++ b/arch/arm/boot/dts/arm/Makefile
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_INTEGRATOR) += \
+	integratorap.dtb \
+	integratorap-im-pd1.dtb \
+	integratorcp.dtb
+dtb-$(CONFIG_ARCH_MPS2) += \
+	mps2-an385.dtb \
+	mps2-an399.dtb
+dtb-$(CONFIG_ARCH_REALVIEW) += \
+	arm-realview-pb1176.dtb \
+	arm-realview-pb11mp.dtb \
+	arm-realview-eb.dtb \
+	arm-realview-eb-bbrevd.dtb \
+	arm-realview-eb-11mp.dtb \
+	arm-realview-eb-11mp-bbrevd.dtb \
+	arm-realview-eb-11mp-ctrevb.dtb \
+	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
+	arm-realview-eb-a9mp.dtb \
+	arm-realview-eb-a9mp-bbrevd.dtb \
+	arm-realview-pba8.dtb \
+	arm-realview-pbx-a9.dtb
+dtb-$(CONFIG_ARCH_VERSATILE) += \
+	versatile-ab.dtb \
+	versatile-ab-ib2.dtb \
+	versatile-pb.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += \
+	vexpress-v2p-ca5s.dtb \
+	vexpress-v2p-ca9.dtb \
+	vexpress-v2p-ca15-tc1.dtb \
+	vexpress-v2p-ca15_a7.dtb
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
new file mode 100644
index 0000000000000..e18769df9fd94
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp-ctrevb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/*
+ * This is the EB with the new Revision D baseboard with SMSC9118 ethernet and
+ * the Rev B core tile.
+ */
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Core Tile Rev B";
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts
new file mode 100644
index 0000000000000..26b1c69e9f436
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Rev C Core Tile";
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts
new file mode 100644
index 0000000000000..e68527b0d5522
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+
+/ {
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev B";
+};
+
+/*
+ * The revision B has a distinctly different layout of the syscon, so
+ * append a specific compatible-string.
+ */
+&syscon {
+	compatible = "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon", "simple-mfd";
+};
+
+&intc {
+	reg = <0x10101000 0x1000>,
+	      <0x10100100 0x100>;
+};
+
+&L2 {
+	reg = <0x10102000 0x1000>;
+};
+
+&scu {
+	reg = <0x10100000 0x100>;
+};
+
+&twd_timer {
+	reg = <0x10100600 0x20>;
+};
+
+&twd_wdog {
+	reg = <0x10100620 0x20>;
+};
+
+/*
+ * On revision B, we cannot reach the secondary interrupt
+ * controller, as a result, some peripherals that are dependent
+ * on their IRQ cannot be reached, so disable them.
+ */
+&intc_second {
+	status = "disabled";
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&serial2 {
+	status = "disabled";
+};
+
+&serial3 {
+	status = "disabled";
+};
+
+&ssp {
+	status = "disabled";
+};
+
+&wdog {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts
new file mode 100644
index 0000000000000..aac1edd4b2270
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C Core Tile";
+	arm,hbi = <0x146>;
+
+	/*
+	 * This is the ARM11 MPCore tile (HBI-0146) used with the RealView EB.
+	 * Reference: ARM DUI 0318F
+	 *
+	 * To run this machine with QEMU, specify the following:
+	 * qemu-system-arm -M realview-eb-mpcore -smp cpus=4
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		MP11_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+&pmu {
+	interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts
new file mode 100644
index 0000000000000..42efac7496ef1
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-a9mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView EB Baseboard Rev D Cortex A9 MPCore";
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts
new file mode 100644
index 0000000000000..967684b3636c1
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+	model = "ARM RealView EB Cortex A9 MPCore";
+
+	/*
+	 * This is the Cortex A9 MPCore tile used with the
+	 * RealView EB.
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		A9_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+&pmu {
+	interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts
new file mode 100644
index 0000000000000..f533c8b49d97d
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/* This derives from the Realview Baseboard, and overlays the new ethernet */
+#include "arm-realview-eb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D";
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
new file mode 100644
index 0000000000000..a79e1d1d30a7b
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/ {
+	/* Introduce a fixed regulator for the new ethernet controller */
+	veth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+/*
+ * The revision D has a different ethernet controller that the elder boards:
+ * the older board uses LAN91C111 but the new one uses LAN9118.
+ */
+&ethernet {
+	compatible = "smsc,lan9118", "smsc,lan9115";
+	phy-mode = "mii";
+	smsc,irq-active-high;
+	smsc,irq-push-pull;
+	vdd33a-supply = <&veth>;
+	vddvario-supply = <&veth>;
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi
new file mode 100644
index 0000000000000..26783d053ac7f
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/*
+ * This is the common include file for all MPCore variants of the
+ * Evaluation Baseboard, i.e. ARM11MPCore, ARM11MPCore Revision B
+ * and Cortex-A9 MPCore.
+ */
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-eb-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		/* Primary interrupt controller in the test chip */
+		intc: interrupt-controller@1f000100 {
+			compatible = "arm,eb11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x1f001000 0x1000>,
+			      <0x1f000100 0x100>;
+		};
+
+		/* Secondary interrupt controller on the FPGA */
+		intc_second: interrupt-controller@10040000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,l220-cache";
+			reg = <0x1f002000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			/*
+			 * Override default cache size, sets and
+			 * associativity as these may be erroneously set
+			 * up by boot loader(s), probably for safety
+			 * since th outer sync operation can cause the
+			 * cache to hang unless disabled.
+			 */
+			cache-size = <1048576>; // 1MB
+			cache-sets = <4096>;
+			cache-line-size = <32>;
+			arm,shared-override;
+			arm,parity-enable;
+			arm,outer-sync-disable;
+		};
+
+		scu: scu@1f000000 {
+			compatible = "arm,arm11mp-scu";
+			reg = <0x1f000000 0x100>;
+		};
+
+		twd_timer: timer@1f000600 {
+			compatible = "arm,arm11mp-twd-timer";
+			reg = <0x1f000600 0x20>;
+			interrupt-parent = <&intc>;
+			interrupts = <1 13 0xf04>;
+		};
+
+		twd_wdog: watchdog@1f000620 {
+			compatible = "arm,arm11mp-twd-wdt";
+			reg = <0x1f000620 0x20>;
+			interrupt-parent = <&intc>;
+			interrupts = <1 14 0xf04>;
+		};
+
+		/* PMU with one IRQ line per core */
+		pmu: pmu@0 {
+			compatible = "arm,arm11mpcore-pmu";
+			interrupt-parent = <&intc>;
+			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+			<0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/*
+ * On revision A, these peripherals does not have their IRQ lines
+ * routed to the core tile, but they can be reached on the secondary
+ * GIC.
+ */
+&gpio0 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&serial3 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&ssp {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&wdog {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb.dts b/arch/arm/boot/dts/arm/arm-realview-eb.dts
new file mode 100644
index 0000000000000..15431077f00cd
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dts
@@ -0,0 +1,166 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard";
+	compatible = "arm,realview-eb";
+	arm,hbi = <0x140>;
+
+	/*
+	 * This is the core tile with the CPU and GIC etc for the
+	 * ARM926EJ-S, ARM1136, ARM1176 that does not have L2 cache
+	 * or PMU.
+	 *
+	 * To run this machine with QEMU, specify the following:
+	 * qemu-system-arm -M realview-eb
+	 * Unless specified, QEMU will emulate an ARM926EJ-S core tile.
+	 * Switches -cpu arm1136 or -cpu arm1176 emulates the other
+	 * core tiles.
+	 */
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-eb-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		intc: interrupt-controller@10040000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+		};
+	};
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			<0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&charlcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
new file mode 100644
index 0000000000000..fbb2258b451f9
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
@@ -0,0 +1,484 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "arm,realview-eb";
+
+	chosen { };
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c;
+	};
+
+	memory {
+		device_type = "memory";
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	wdogclk: wdogclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	flash1@44000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	/* SMSC LAN91C111 ethernet with PHY and EEPROM */
+	ethernet: ethernet@4e000000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x4e000000 0x10000>;
+		/*
+		 * This means the adapter can be accessed with 8, 16 or
+		 * 32 bit reads/writes.
+		 */
+		reg-io-width = <7>;
+	};
+
+	usb: usb@4f000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x4f000000 0x20000>;
+		dr_mode = "peripheral";
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	/* These peripherals are inside the FPGA */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@8,0 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@8,1 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@8,2 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@8,3 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@8,4 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@8,5 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@8,6 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@8,7 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+			oscclk0: clock-controller@c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: clock-controller@10 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: clock-controller@14 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: clock-controller@18 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: clock-controller@1c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		i2c: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mmc: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		charlcd: fpga_charlcd: charlcd@10008000 {
+			compatible = "arm,versatile-lcd";
+			reg = <0x10008000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		ssp: spi@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		wdog: watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		clcd: clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-names = "combined";
+			clocks = <&oscclk0>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
new file mode 100644
index 0000000000000..efed325af88d2
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
@@ -0,0 +1,608 @@
+/*
+ * Copyright 2014 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "ARM RealView PB1176";
+	compatible = "arm,realview-pb1176";
+
+	chosen { };
+
+	aliases {
+		serial0 = &pb1176_serial0;
+		serial1 = &pb1176_serial1;
+		serial2 = &pb1176_serial2;
+		serial3 = &pb1176_serial3;
+		serial4 = &fpga_serial;
+	};
+
+	memory {
+		device_type = "memory";
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: regulator-veth {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash@30000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x30000000 0x4000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	fpga_flash@38000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x38000000 0x800000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	/*
+	 * The "secure flash" contains things like the boot
+	 * monitor so we don't want people to accidentally
+	 * screw this up. Mark the device tree node disabled
+	 * by default.
+	 */
+	secflash@3c000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x3c000000 0x4000000>;
+		bank-width = <4>;
+		status = "disabled";
+	};
+
+	/* SMSC 9118 ethernet with PHY and EEPROM */
+	ethernet@3a000000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <0x3a000000 0x10000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&veth>;
+		vddvario-supply = <&veth>;
+	};
+
+	usb@3b000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x3b000000 0x20000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		dr_mode = "peripheral";
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-pb1176-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@8,0 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@8,1 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@8,2 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@8,3 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@8,4 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@8,5 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@8,6 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@8,7 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+			oscclk0: clock-controller@c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: clock-controller@10 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: clock-controller@14 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: clock-controller@18 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: clock-controller@1c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		/* Primary DevChip GIC synthesized with the CPU */
+		intc_dc1176: interrupt-controller@10120000 {
+			compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10121000 0x1000>,
+			      <0x10120000 0x100>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,l220-cache";
+			reg = <0x10110000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			/*
+			 * Override default cache size, sets and
+			 * associativity as these may be erroneously set
+			 * up by boot loader(s).
+			 */
+			arm,override-auxreg;
+			cache-size = <131072>; // 128kB
+			cache-sets = <512>;
+			cache-line-size = <32>;
+		};
+
+		pmu {
+			compatible = "arm,arm1176-pmu";
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer01: timer@10104000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10104000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer23: timer@10105000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10105000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		pb1176_rtc: rtc@10108000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10108000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pb1176_gpio0: gpio@1010a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x1010a000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pb1176_ssp: spi@1010b000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1010b000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		pb1176_serial0: serial@1010c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010c000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial1: serial@1010d000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010d000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial2: serial@1010e000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010e000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial3: serial@1010f000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010f000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		/* Direct-mapped development chip ROM */
+		pb1176_rom@10200000 {
+			compatible = "direct-mapped";
+			reg = <0x10200000 0x4000>;
+			bank-width = <1>;
+		};
+
+		clcd@10112000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10112000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupt-names = "combined";
+			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk0>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+
+	/* These peripherals are inside the FPGA rather than the DevChip */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		fpga_aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_mci: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>,
+					<0 2 IRQ_TYPE_LEVEL_HIGH>;
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&fpga_gpio1 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&fpga_gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		fpga_kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		fpga_kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		fpga_charlcd: charlcd@10008000 {
+			compatible = "arm,versatile-lcd";
+			reg = <0x10008000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_serial: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		/* This GIC on the board is cascaded off the DevChip GIC */
+		intc_fpga1176: interrupt-controller@10040000 {
+			compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		fpga_gpio0: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_gpio1: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
new file mode 100644
index 0000000000000..89103d54ecc15
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
@@ -0,0 +1,736 @@
+/*
+ * Copyright 2015 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "ARM RealView PB11MPcore";
+	compatible = "arm,realview-pb11mp";
+
+	chosen { };
+
+	aliases {
+		serial0 = &pb11mp_serial0;
+		serial1 = &pb11mp_serial1;
+		serial2 = &pb11mp_serial2;
+		serial3 = &pb11mp_serial3;
+	};
+
+	memory {
+		device_type = "memory";
+		/*
+		 * The PB11MPCore has 512 MiB memory @ 0x70000000
+		 * and the first 256 are also remapped @ 0x00000000
+		 */
+		reg = <0x70000000 0x20000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		MP11_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	/* Primary TestChip GIC synthesized with the CPU */
+	intc_tc11mp: interrupt-controller@1f000100 {
+		compatible = "arm,tc11mp-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1f001000 0x1000>,
+		      <0x1f000100 0x100>;
+	};
+
+	L2: cache-controller {
+		compatible = "arm,l220-cache";
+		reg = <0x1f002000 0x1000>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		cache-unified;
+		cache-level = <2>;
+		/*
+		 * Override default cache size, sets and
+		 * associativity as these may be erroneously set
+		 * up by boot loader(s), probably for safety
+		 * since th outer sync operation can cause the
+		 * cache to hang unless disabled.
+		 */
+		cache-size = <1048576>; // 1MB
+		cache-sets = <4096>;
+		cache-line-size = <32>;
+		arm,shared-override;
+		arm,parity-enable;
+		arm,outer-sync-disable;
+	};
+
+	scu@1f000000 {
+		compatible = "arm,arm11mp-scu";
+		reg = <0x1f000000 0x100>;
+	};
+
+	timer@1f000600 {
+		compatible = "arm,arm11mp-twd-timer";
+		reg = <0x1f000600 0x20>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	watchdog@1f000620 {
+		compatible = "arm,arm11mp-twd-wdt";
+		reg = <0x1f000620 0x20>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	/* PMU with one IRQ line per core */
+	pmu {
+		compatible = "arm,arm11mpcore-pmu";
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: regulator-veth {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	wdogclk: wdogclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	flash1@44000000 {
+		// 2 * 32MiB NOR Flash memory
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		/*
+		 * This DDC I2C is connected directly to the DVI portions
+		 * of the connector, so it's not really working when the
+		 * monitor is connected to the VGA connector.
+		 */
+		compatible = "vga-connector";
+		ddc-i2c-bus = <&i2c1>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-pb11mp-soc", "simple-bus";
+		regmap = <&pb11mp_syscon>;
+		ranges;
+
+		pb11mp_syscon: syscon@10000000 {
+			compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@8,0 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@8,1 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@8,2 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@8,3 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				linux,default-trigger = "cpu1";
+				default-state = "off";
+			};
+			led@8,4 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				linux,default-trigger = "cpu2";
+				default-state = "off";
+			};
+			led@8,5 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				linux,default-trigger = "cpu3";
+				default-state = "off";
+			};
+			led@8,6 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@8,7 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+
+			oscclk0: clock-controller@c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: clock-controller@10 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: clock-controller@14 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: clock-controller@18 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: clock-controller@1c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk5: clock-controller@d4 {
+				compatible = "arm,syscon-icst307";
+				reg = <0xd4 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0xd4>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk6: clock-controller@d8 {
+				compatible = "arm,syscon-icst307";
+				reg = <0xd8 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0xd8>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		sp810_syscon: sysctl@10001000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x10001000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk0",
+					     "timerclk1",
+					     "timerclk2",
+					     "timerclk3";
+			assigned-clocks = <&sp810_syscon 0>,
+					  <&sp810_syscon 1>,
+					  <&sp810_syscon 2>,
+					  <&sp810_syscon 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mci: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+					<0 15 IRQ_TYPE_LEVEL_HIGH>;
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		pb11mp_serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		spi@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		watchdog@1000f000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x1000f000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&sp810_syscon 0>,
+			         <&sp810_syscon 1>,
+				 <&pclk>;
+			clock-names = "timer0clk",
+				    "timer1clk",
+				    "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&sp810_syscon 2>,
+			         <&sp810_syscon 3>,
+				 <&pclk>;
+			clock-names = "timer0clk",
+				    "timer1clk",
+				    "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		i2c1: i2c@10016000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10016000 0x1000>;
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer45: timer@10018000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10018000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer67: timer@10019000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10019000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+
+		clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupt-names = "combined";
+			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk4>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+
+		/*
+		 * This GIC on the Platform Baseboard is cascaded off the
+		 * TestChip GIC
+		 */
+		intc_pb11mp: interrupt-controller@1e000000 {
+			compatible = "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x1e001000 0x1000>,
+			      <0x1e000000 0x100>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		/* SMSC 9118 ethernet with PHY and EEPROM */
+		ethernet@4e000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <0x4e000000 0x10000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,irq-active-high;
+			smsc,irq-push-pull;
+			vdd33a-supply = <&veth>;
+			vddvario-supply = <&veth>;
+		};
+
+		usb@4f000000 {
+			compatible = "nxp,usb-isp1761";
+			reg = <0x4f000000 0x20000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "peripheral";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-pba8.dts b/arch/arm/boot/dts/arm/arm-realview-pba8.dts
new file mode 100644
index 0000000000000..d3238c252b597
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-pba8.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-pbx.dtsi"
+
+/ {
+	model = "ARM RealView Platform Baseboard for Cortex-A8";
+	compatible = "arm,realview-pba8";
+	arm,hbi = <0x178>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0>;
+		};
+	};
+
+	pmu: pmu@0 {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	/* Primary GIC PL390 interrupt controller in the test chip */
+	intc: interrupt-controller@1e000000 {
+		compatible = "arm,pl390";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1e001000 0x1000>,
+		      <0x1e000000 0x100>;
+	};
+};
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&soc {
+	compatible = "arm,realview-pba8-soc", "simple-bus";
+};
+
+&syscon {
+	compatible = "arm,realview-pba8-syscon", "syscon", "simple-mfd";
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer45 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer67 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts
new file mode 100644
index 0000000000000..85d3968fbb917
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts
@@ -0,0 +1,228 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-pbx.dtsi"
+
+/ {
+	/*
+	 * This is the RealView Platform Baseboard Explore for Cortex-A9
+	 * (HBI0182 + HBI0183) as described in ARM DUI 0440B
+	 */
+	model = "ARM RealView Platform Baseboard Explore for Cortex-A9";
+	arm,hbi = <0x182>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+		};
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	L2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0x1f002000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+		/*
+		 * Override default cache size, sets and
+		 * associativity as these may be erroneously set
+		 * up by boot loader(s).
+		 */
+		cache-size = <131072>; // 128KB
+		cache-sets = <512>;
+		cache-line-size = <32>;
+		arm,parity-disable;
+		arm,tag-latency = <1 1 1>;
+		arm,data-latency = <1 1 1>;
+	};
+
+	scu: scu@1f000000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1f000000 0x100>;
+	};
+
+	twd_timer: timer@1f000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1f000600 0x20>;
+		interrupt-parent = <&intc>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	twd_wdog: watchdog@1f000620 {
+		compatible = "arm,cortex-a9-twd-wdt";
+		reg = <0x1f000620 0x20>;
+		interrupt-parent = <&intc>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	pmu: pmu@0 {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CPU0>, <&CPU1>;
+	};
+
+	/* Primary GIC PL390 interrupt controller in the test chip */
+	intc: interrupt-controller@1f000000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1f001000 0x1000>,
+		      <0x1f000100 0x100>;
+	};
+};
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer45 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer67 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
new file mode 100644
index 0000000000000..ec1507c5147c6
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
@@ -0,0 +1,593 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "arm,realview-pbx";
+
+	chosen { };
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	memory {
+		device_type = "memory";
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: regulator-veth {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	refclk32khz: refclk32khz {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	wdogclk: wdogclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	flash1@44000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	/* SMSC 9118 ethernet with PHY and EEPROM */
+	ethernet: ethernet@4e000000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <0x4e000000 0x10000>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&veth>;
+		vddvario-supply = <&veth>;
+	};
+
+	usb: usb@4f000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x4f000000 0x20000>;
+		dr_mode = "peripheral";
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		/*
+		 * This DDC I2C is connected directly to the DVI portions
+		 * of the connector, so it's not really working when the
+		 * monitor is connected to the VGA connector.
+		 */
+		compatible = "vga-connector";
+		ddc-i2c-bus = <&i2c1>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	soc: soc {
+		compatible = "arm,realview-pbx-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		regmap = <&syscon>;
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@8,0 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@8,1 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@8,2 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@8,3 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@8,4 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@8,5 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@8,6 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@8,7 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+			oscclk0: clock-controller@c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: clock-controller@10 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: clock-controller@14 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: clock-controller@18 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: clock-controller@1c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		sp810_syscon0: sysctl@10001000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x10001000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk0",
+					     "timerclk1",
+					     "timerclk2",
+					     "timerclk3";
+			assigned-clocks = <&sp810_syscon0 0>,
+					  <&sp810_syscon0 1>,
+					  <&sp810_syscon0 2>,
+					  <&sp810_syscon0 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		ssp: spi@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		wdog0: watchdog@1000f000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x1000f000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		wdog1: watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			clocks = <&sp810_syscon0 0>,
+			         <&sp810_syscon0 1>,
+				 <&pclk>;
+			clock-names = "timerclk0",
+				    "timerclk1",
+				    "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			clocks = <&sp810_syscon0 2>,
+			         <&sp810_syscon0 3>,
+				 <&pclk>;
+			clock-names = "timerclk2",
+				    "timerclk3",
+				    "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		i2c1: i2c@10016000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10016000 0x1000>;
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer45: timer@10018000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10018000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timerclk4", "timerclk5", "apb_pclk";
+		};
+
+		timer67: timer@10019000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10019000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timerclk6", "timerclk7", "apb_pclk";
+		};
+
+		sp810_syscon1: sysctl@1001a000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x1001a000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk4",
+					     "timerclk5",
+					     "timerclk6",
+					     "timerclk7";
+			assigned-clocks = <&sp810_syscon1 0>,
+					  <&sp810_syscon1 1>,
+					  <&sp810_syscon1 2>,
+					  <&sp810_syscon1 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+	};
+
+
+	/* These peripherals are inside the FPGA */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mmc: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+	};
+
+	/* These peripherals are inside the NEC ISSP */
+	issp {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		clcd: clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-names = "combined";
+			clocks = <&oscclk4>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/integrator.dtsi b/arch/arm/boot/dts/arm/integrator.dtsi
new file mode 100644
index 0000000000000..7f1c8ee9dd8ab
--- /dev/null
+++ b/arch/arm/boot/dts/arm/integrator.dtsi
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SoC core Device Tree for the ARM Integrator platforms
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	core-module@10000000 {
+		compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
+		reg = <0x10000000 0x200>;
+		ranges = <0x0 0x10000000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* Use core module LED to indicate CPU load */
+		led@c,0 {
+			compatible = "register-bit-led";
+			reg = <0x0c 0x04>;
+			offset = <0x0c>;
+			mask = <0x01>;
+			label = "integrator:core_module";
+			linux,default-trigger = "cpu0";
+			default-state = "on";
+		};
+	};
+
+	ebi@12000000 {
+		compatible = "arm,external-bus-interface";
+		reg = <0x12000000 0x100>;
+	};
+
+	timer@13000000 {
+		reg = <0x13000000 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <5>;
+	};
+
+	timer@13000100 {
+		reg = <0x13000100 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <6>;
+	};
+
+	timer@13000200 {
+		reg = <0x13000200 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <7>;
+	};
+
+	pic@14000000 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0x14000000 0x100>;
+		clear-mask = <0xffffffff>;
+	};
+
+	flash@24000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x24000000 0x02000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&pic>;
+
+		/*
+		 * These PrimeCells are in the same locations and using the
+		 * same interrupts in all Integrators, however the silicon
+		 * version deployed is different.
+		 */
+		rtc@15000000 {
+			reg = <0x15000000 0x1000>;
+			interrupts = <8>;
+		};
+
+		serial@16000000 {
+			reg = <0x16000000 0x1000>;
+			interrupts = <1>;
+		};
+
+		serial@17000000 {
+			reg = <0x17000000 0x1000>;
+			interrupts = <2>;
+		};
+
+		kmi@18000000 {
+			reg = <0x18000000 0x1000>;
+			interrupts = <3>;
+		};
+
+		kmi@19000000 {
+			reg = <0x19000000 0x1000>;
+			interrupts = <4>;
+		};
+
+		syscon@1a000000 {
+			/* Debug registers mapped as syscon */
+			compatible = "syscon", "simple-mfd";
+			reg = <0x1a000000 0x10>;
+			ranges = <0x0 0x1a000000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@4,0 {
+				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
+				offset = <0x04>;
+				mask = <0x01>;
+				label = "integrator:green0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@4,1 {
+				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
+				offset = <0x04>;
+				mask = <0x02>;
+				label = "integrator:yellow";
+				default-state = "off";
+			};
+			led@4,2 {
+				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
+				offset = <0x04>;
+				mask = <0x04>;
+				label = "integrator:red";
+				default-state = "off";
+			};
+			led@4,3 {
+				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
+				offset = <0x04>;
+				mask = <0x08>;
+				label = "integrator:green1";
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
new file mode 100644
index 0000000000000..7072a70da00d9
--- /dev/null
+++ b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/AP platform
+ * with the IM-PD1 example logical module mounted.
+ */
+
+#include "integratorap.dts"
+
+/ {
+	model = "ARM Integrator/AP with IM-PD1";
+	compatible = "arm,integrator-ap";
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		impd1_ram: vram@c2000000 {
+			/* 1 MB of designated video RAM on the IM-PD1 */
+			compatible = "shared-dma-pool";
+			reg = <0xc2000000 0x00100000>;
+			no-map;
+		};
+	};
+};
+
+&lm0 {
+	syscon@0 {
+		compatible = "arm,im-pd1-syscon", "syscon";
+		reg = <0x00000000 0x1000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		vco1: clock-controller@0 {
+			compatible = "arm,impd1-vco1";
+			reg = <0x00 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x08>;
+			vco-offset = <0x00>;
+			clocks = <&sysclk>;
+			clock-output-names = "IM-PD1-VCO1";
+		};
+
+		vco2: clock-controller@4 {
+			compatible = "arm,impd1-vco2";
+			reg = <0x04 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x08>;
+			vco-offset = <0x04>;
+			clocks = <&sysclk>;
+			clock-output-names = "IM-PD1-VCO2";
+		};
+	};
+
+	/* Also used for the Smart Card Interface SCI */
+	impd1_uartclk: clock@1_4 {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clocks = <&vco2>;
+		clock-output-names = "VCO2_DIV4";
+	};
+
+	/* For the SSP the clock is divided by 64 */
+	impd1_sspclk: clock@1_64 {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clock-div = <64>;
+		clock-mult = <1>;
+		clocks = <&vco2>;
+		clock-output-names = "VCO2_DIV64";
+	};
+
+	/* Fixed regulator for the MMC */
+	impd1_3v3: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Push buttons on the IM-PD1 */
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			debounce-interval = <50>;
+			linux,code = <KEY_UP>;
+			label = "UP";
+			gpios = <&impd1_gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+		button@1 {
+			debounce-interval = <50>;
+			linux,code = <KEY_DOWN>;
+			label = "DOWN";
+			gpios = <&impd1_gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			debounce-interval = <50>;
+			linux,code = <KEY_LEFT>;
+			label = "LEFT";
+			gpios = <&impd1_gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+		button@3 {
+			debounce-interval = <50>;
+			linux,code = <KEY_RIGHT>;
+			label = "UP";
+			gpios = <&impd1_gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+		button@4 {
+			debounce-interval = <50>;
+			linux,code = <KEY_ESC>;
+			label = "ESC";
+			gpios = <&impd1_gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+		button@5 {
+			debounce-interval = <50>;
+			linux,code = <KEY_ENTER>;
+			label = "ENTER";
+			gpios = <&impd1_gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+
+	bridge {
+		compatible = "ti,ths8134b", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+					vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	serial@100000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x00100000 0x1000>;
+		interrupts-extended = <&impd1_vic 1>;
+		clocks = <&impd1_uartclk>, <&sysclk>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	serial@200000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x00200000 0x1000>;
+		interrupts-extended = <&impd1_vic 2>;
+		clocks = <&impd1_uartclk>, <&sysclk>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	spi@300000 {
+		compatible = "arm,pl022", "arm,primecell";
+		reg = <0x00300000 0x1000>;
+		interrupts-extended = <&impd1_vic 3>;
+		clocks = <&impd1_sspclk>, <&sysclk>;
+		clock-names = "sspclk", "apb_pclk";
+	};
+
+	impd1_gpio0: gpio@400000 {
+		compatible = "arm,pl061", "arm,primecell";
+		reg = <0x00400000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts-extended = <&impd1_vic 4>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	impd1_gpio1: gpio@500000 {
+		compatible = "arm,pl061", "arm,primecell";
+		reg = <0x00500000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts-extended = <&impd1_vic 5>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	rtc@600000 {
+		compatible = "arm,pl030", "arm,primecell";
+		reg = <0x00600000 0x1000>;
+		interrupts-extended = <&impd1_vic 6>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	mmc@700000 {
+		compatible = "arm,pl181", "arm,primecell";
+		reg = <0x00700000 0x1000>;
+		interrupts-extended = <&impd1_vic 7>,
+				    <&impd1_vic 8>;
+		clocks = <&sysclk>, <&sysclk>;
+		clock-names = "mclk", "apb_pclk";
+		bus-width = <1>;
+		max-frequency = <515633>;
+		vmmc-supply = <&impd1_3v3>;
+		wp-gpios = <&impd1_gpio0 3 GPIO_ACTIVE_HIGH>;
+		cd-gpios = <&impd1_gpio0 4 GPIO_ACTIVE_LOW>;
+	};
+
+	aaci@800000 {
+		compatible = "arm,pl041", "arm,primecell";
+		reg = <0x00800000 0x1000>;
+		interrupts-extended = <&impd1_vic 9>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	display@1000000 {
+		compatible = "arm,pl110", "arm,primecell";
+		reg = <0x01000000 0x1000>;
+		interrupts-extended = <&impd1_vic 11>;
+		clocks = <&vco1>, <&sysclk>;
+		clock-names = "clcdclk", "apb_pclk";
+		/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
+		max-memory-bandwidth = <40000000>;
+		memory-region = <&impd1_ram>;
+		dma-ranges;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clcd_pads_vga_dac: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vga_bridge_in>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+	};
+
+	impd1_vic: interrupt-controller@3000000 {
+		compatible = "arm,pl192-vic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x03000000 0x1000>;
+		/* Valid interrupts, 0-9 and 11 */
+		valid-mask = <0x00000bff>;
+		/* LM site 0 has IRQ 9 on the PIC */
+		interrupts-extended = <&pic 9>;
+	};
+};
diff --git a/arch/arm/boot/dts/arm/integratorap.dts b/arch/arm/boot/dts/arm/integratorap.dts
new file mode 100644
index 0000000000000..d9927d3181dce
--- /dev/null
+++ b/arch/arm/boot/dts/arm/integratorap.dts
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/AP platform
+ */
+
+/dts-v1/;
+#include "integrator.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ARM Integrator/AP";
+	compatible = "arm,integrator-ap";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			/*
+			 * Since the board has pluggable CPU modules, we
+			 * cannot define a proper compatible here. Let the
+			 * boot loader fill in the apropriate compatible
+			 * string if necessary.
+			 */
+			/* compatible = "arm,arm926ej-s"; */
+			reg = <0>;
+			/*
+			 * The documentation in ARM DUI 0138E page 3-12 states
+			 * that the maximum frequency for this clock is 200 MHz
+			 * but painful trial-and-error has proved to me that it
+			 * is actually just hanging the system above 71 MHz.
+			 * Sad but true.
+			 */
+					 /* kHz     uV   */
+			operating-points = <71000  0
+					    66000  0
+					    60000  0
+					    48000  0
+					    36000  0
+					    24000  0
+					    12000  0>;
+			clocks = <&cmosc>;
+			clock-names = "cpu";
+			clock-latency = <1000000>; /* 1 ms */
+		};
+	};
+
+	aliases {
+		arm,timer-primary = &timer2;
+		arm,timer-secondary = &timer1;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
+	};
+
+	/* 24 MHz chrystal on the Integrator/AP development board */
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* The UART clock is 14.74 MHz divided by an ICS525 */
+	uartclk: uartclk@14.74M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <14745600>;
+		clocks = <&xtal24mhz>;
+	};
+
+	core-module@10000000 {
+		/* 24 MHz chrystal on the core module */
+		cm24mhz: cm24mhz@24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		/* Oscillator on the core module, clocks the CPU core */
+		cmosc: clock-controller@8 {
+			compatible = "arm,syscon-icst525-integratorap-cm";
+			reg = <0x08 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, 32.369MHz at boot */
+		auxosc: clock-controller@1c {
+			compatible = "arm,syscon-icst525";
+			reg = <0x1c 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
+		};
+	};
+
+	syscon {
+		compatible = "arm,integrator-ap-syscon", "syscon";
+		reg = <0x11000000 0x100>;
+		ranges = <0x0 0x11000000 0x100>;
+		#size-cells = <1>;
+		#address-cells = <1>;
+
+		/*
+		 * SYSCLK clocks PCIv3 bridge, system controller and the
+		 * logic modules.
+		 */
+		sysclk: clock-controller@4 {
+			compatible = "arm,syscon-icst525-integratorap-sys";
+			reg = <0x04 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
+
+		/* One-bit control for the PCI bus clock (33 or 25 MHz) */
+		pciclk: clock-controller@4,8 {
+			compatible = "arm,syscon-icst525-integratorap-pci";
+			reg = <0x04 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
+	};
+
+	timer0: timer@13000000 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	timer1: timer@13000100 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	timer2: timer@13000200 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	pic: pic@14000000 {
+		valid-mask = <0x003fffff>;
+	};
+
+	pci: pci@62000000 {
+		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		/* Bridge registers and config access space */
+		reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
+		interrupt-parent = <&pic>;
+		interrupts = <17>; /* Bus error IRQ */
+		clocks = <&pciclk>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x01000000 0 0x0000000 /* I/O space @00000000 */
+			0x60000000 0 0x00010000 /* 64 KB @ LB 60000000 */
+			0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
+			0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
+			0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
+			0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
+		dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
+			0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
+			0x02000000 0 0x80000000 /* Core module alias memory */
+			0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
+		interrupt-map-mask = <0xf800 0 0 0x7>;
+		interrupt-map = <
+		/* IDSEL 9 */
+		0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
+		0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
+		0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
+		0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+		/* IDSEL 10 */
+		0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
+		0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
+		0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
+		0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+		/* IDSEL 11 */
+		0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
+		0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
+		0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
+		0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+		/* IDSEL 12 */
+		0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
+		0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
+		0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
+		0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+		>;
+	};
+
+	fpga {
+		/*
+		 * The Integator/AP predates the idea to have magic numbers
+		 * identifying the PrimeCell in hardware, thus we have to
+		 * supply these from the device tree.
+		 */
+		rtc: rtc@15000000 {
+			compatible = "arm,pl030", "arm,primecell";
+			arm,primecell-periphid = <0x00041030>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: serial@16000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: serial@17000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		kmi0: kmi@18000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@19000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+	};
+
+	/*
+	 * Logic module bus, we support up to 4 logical modules
+	 * They appear at 0xc0000000, 0xd0000000, 0xe0000000 and 0xf0000000
+	 * and use interrupts 9, 10, 11 and 12 respectively.
+	 */
+	bus@c0000000 {
+		compatible = "arm,integrator-ap-lm";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0xc0000000 0xc0000000 0x40000000>;
+		dma-ranges;
+
+		lm0: bus@c0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xc0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xc0000000 0x10000000>;
+			reg = <0xc0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm1: bus@d0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xd0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xd0000000 0x10000000>;
+			reg = <0xd0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm2: bus@e0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xe0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xe0000000 0x10000000>;
+			reg = <0xe0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm3: bus@f0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xf0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xf0000000 0x10000000>;
+			reg = <0xf0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/integratorcp.dts b/arch/arm/boot/dts/arm/integratorcp.dts
new file mode 100644
index 0000000000000..c011333eb165d
--- /dev/null
+++ b/arch/arm/boot/dts/arm/integratorcp.dts
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/CP platform
+ */
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+	model = "ARM Integrator/CP";
+	compatible = "arm,integrator-cp";
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			/*
+			 * Since the board has pluggable CPU modules, we
+			 * cannot define a proper compatible here. Let the
+			 * boot loader fill in the apropriate compatible
+			 * string if necessary.
+			 */
+			/* compatible = "arm,arm920t"; */
+			reg = <0>;
+			/*
+			 * TBD comment.
+			 */
+					 /* kHz     uV   */
+			operating-points = <50000  0
+					    48000  0>;
+			clocks = <&cmcore>;
+			clock-names = "cpu";
+			clock-latency = <1000000>; /* 1 ms */
+		};
+	};
+
+	/*
+	 * The Integrator/CP overall clocking architecture can be found in
+	 * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
+	 * appear to illustrate the layout used in most configurations.
+	 */
+
+	/* The codec chrystal operates at 24.576 MHz */
+	xtal_codec: xtal24.576@24.576M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
+	aaci_bitclk: aaci_bitclk@12.288M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&xtal_codec>;
+	};
+
+	/* This is a 25MHz chrystal on the base board */
+	xtal25mhz: xtal25mhz@25M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
+	uartclk: uartclk@14.74M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <14745600>;
+	};
+
+	/* Actually sysclk I think */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	core-module@10000000 {
+		/* 24 MHz chrystal on the core module */
+		cm24mhz: cm24mhz@24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		/* Oscillator on the core module, clocks the CPU core */
+		cmcore: clock-controller@8 {
+			compatible = "arm,syscon-icst525-integratorcp-cm-core";
+			reg = <0x08 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Oscillator on the core module, clocks the memory bus */
+		cmmem: clock-controller@8,12 {
+			compatible = "arm,syscon-icst525-integratorcp-cm-mem";
+			reg = <0x08 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, clocks the CLCD */
+		auxosc: clock-controller@1c {
+			compatible = "arm,syscon-icst525";
+			reg = <0x1c 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
+		kmiclk: kmiclk@1M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <3>;
+			clock-mult = <1>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
+		timclk: timclk@1M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <24>;
+			clock-mult = <1>;
+			clocks = <&cm24mhz>;
+		};
+	};
+
+	syscon {
+		compatible = "arm,integrator-cp-syscon", "syscon";
+		reg = <0xcb000000 0x100>;
+	};
+
+	timer0: timer@13000000 {
+		/* TIMER0 runs directly on the 25MHz chrystal */
+		compatible = "arm,integrator-cp-timer";
+		clocks = <&xtal25mhz>;
+	};
+
+	timer1: timer@13000100 {
+		/* TIMER1 runs @ 1MHz */
+		compatible = "arm,integrator-cp-timer";
+		clocks = <&timclk>;
+	};
+
+	timer2: timer@13000200 {
+		/* TIMER2 runs @ 1MHz */
+		compatible = "arm,integrator-cp-timer";
+		clocks = <&timclk>;
+	};
+
+	pic: pic@14000000 {
+		valid-mask = <0x1fc003ff>;
+	};
+
+	cic: cic@10000040 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0x10000040 0x100>;
+		clear-mask = <0xffffffff>;
+		valid-mask = <0x00000007>;
+	};
+
+	/* The SIC is cascaded off IRQ 26 on the PIC */
+	sic: sic@ca000000 {
+		compatible = "arm,versatile-fpga-irq";
+		interrupt-parent = <&pic>;
+		interrupts = <26>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0xca000000 0x100>;
+		clear-mask = <0x00000fff>;
+		valid-mask = <0x00000fff>;
+	};
+
+	ethernet@c8000000 {
+		compatible = "smsc,lan91c111";
+		reg = <0xc8000000 0x10>;
+		interrupt-parent = <&pic>;
+		interrupts = <27>;
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	fpga {
+		/*
+		 * These PrimeCells are at the same location and using
+		 * the same interrupts in all Integrators, but in the CP
+		 * slightly newer versions are deployed.
+		 */
+		rtc@15000000 {
+			compatible = "arm,pl031", "arm,primecell";
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		serial@16000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial@17000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		kmi@18000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi@19000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		/*
+		 * These PrimeCells are only available on the Integrator/CP
+		 */
+		mmc@1c000000 {
+			compatible = "arm,pl180", "arm,primecell";
+			reg = <0x1c000000 0x1000>;
+			interrupts = <23 24>;
+			max-frequency = <515633>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+		};
+
+		aaci@1d000000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x1d000000 0x1000>;
+			interrupts = <25>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		clcd@c0000000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0xC0000000 0x1000>;
+			interrupts = <22>;
+			clocks = <&auxosc>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
+			max-memory-bandwidth = <40000000>;
+
+			/*
+			 * This port is routed through a PLD (Programmable
+			 * Logic Device) that routes the output from the CLCD
+			 * (after transformations) to the VGA DAC and also an
+			 * external panel connector. The PLD is essential for
+			 * supporting RGB565/BGR565.
+			 *
+			 * The signals from the port thus reaches two endpoints.
+			 * The PLD is managed through a few special bits in the
+			 * FPGA "sysreg".
+			 *
+			 * This arrangement can be clearly seen in
+			 * ARM DUI 0225D, page 3-41, figure 3-19.
+			 */
+			port@0 {
+				clcd_pads_vga_dac: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/mps2-an385.dts b/arch/arm/boot/dts/arm/mps2-an385.dts
new file mode 100644
index 0000000000000..aebbebfc25d11
--- /dev/null
+++ b/arch/arm/boot/dts/arm/mps2-an385.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "mps2.dtsi"
+
+/ {
+	model = "ARM MPS2 Application Note 385/386";
+	compatible = "arm,mps2";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:9600n8";
+	};
+
+	memory@21000000 {
+		device_type = "memory";
+		reg = <0x21000000 0x1000000>;
+	};
+
+	smb {
+		ethernet@0,0 {
+			compatible = "smsc,lan9220", "smsc,lan9115";
+			reg = <0 0x0 0x10000>;
+			interrupts = <13>;
+			interrupt-parent = <&nvic>;
+			smsc,irq-active-high;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&timer0 {
+	status = "okay";
+};
+
+&timer1 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/arm/mps2-an399.dts b/arch/arm/boot/dts/arm/mps2-an399.dts
new file mode 100644
index 0000000000000..349abf70b2a58
--- /dev/null
+++ b/arch/arm/boot/dts/arm/mps2-an399.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "mps2.dtsi"
+
+/ {
+	model = "ARM MPS2 Application Note 399/400";
+	compatible = "arm,mps2";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:9600n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x1000000>;
+	};
+
+	smb {
+		ethernet@1,0 {
+			compatible = "smsc,lan9220", "smsc,lan9115";
+			reg = <1 0x0 0x10000>;
+			interrupts = <13>;
+			interrupt-parent = <&nvic>;
+			smsc,irq-active-high;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&timer0 {
+	status = "okay";
+};
+
+&timer1 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/arm/mps2.dtsi b/arch/arm/boot/dts/arm/mps2.dtsi
new file mode 100644
index 0000000000000..ce308820765b8
--- /dev/null
+++ b/arch/arm/boot/dts/arm/mps2.dtsi
@@ -0,0 +1,252 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "../armv7-m.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	oscclk0: clk-osc0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	oscclk1: clk-osc1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	oscclk2: clk-osc2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	cfgclk: clk-cfg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <5000000>;
+	};
+
+	spicfgclk: clk-spicfg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <75000000>;
+	};
+
+	sysclk: clk-sys {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	audmclk: clk-audm {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk1>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	audsclk: clk-auds {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk1>;
+		#clock-cells = <0>;
+		clock-div = <8>;
+		clock-mult = <1>;
+	};
+
+	spiclcd: clk-cpiclcd {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	spicon: clk-spicon {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	i2cclcd: clk-i2cclcd {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	i2caud: clk-i2caud {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+
+		apb@40000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40000000 0x10000>;
+
+			timer0: mps2-timer0@0 {
+				compatible = "arm,mps2-timer";
+				reg = <0x0 0x1000>;
+				interrupts = <8>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			timer1: mps2-timer1@1000 {
+				compatible = "arm,mps2-timer";
+				reg = <0x1000 0x1000>;
+				interrupts = <9>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			timer2: dual-timer@2000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x2000 0x1000>;
+				clocks = <&sysclk>, <&sysclk>, <&sysclk>;
+				clock-names = "timer0clk", "timer1clk",
+					       "apb_pclk";
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			uart0: serial@4000 {
+				compatible = "arm,mps2-uart";
+				reg = <0x4000 0x1000>;
+				interrupts = <0>, <1>, <12>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			uart1: serial@5000 {
+				compatible = "arm,mps2-uart";
+				reg = <0x5000 0x1000>;
+				interrupts = <2>, <3>, <12>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			uart2: serial@6000 {
+				compatible = "arm,mps2-uart";
+				reg = <0x6000 0x1000>;
+				interrupts = <4>, <5>, <12>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			wdt: watchdog@8000 {
+				compatible = "arm,sp805", "arm,primecell";
+				arm,primecell-periphid = <0x00141805>;
+				reg = <0x8000 0x1000>;
+				interrupts = <0>;
+				clocks = <&sysclk>, <&sysclk>;
+				clock-names = "wdog_clk", "apb_pclk";
+				status = "disabled";
+			};
+		};
+	};
+
+	fpga@40020000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40020000 0x10000>;
+
+		fpgaio@8000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x8000 0x10>;
+
+			ranges = <0x0 0x8000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@0,0 {
+				compatible = "register-bit-led";
+				reg = <0x00 0x04>;
+				offset = <0x0>;
+				mask = <0x01>;
+				label = "userled:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+
+			led@0,1 {
+				compatible = "register-bit-led";
+				reg = <0x00 0x04>;
+				offset = <0x0>;
+				mask = <0x02>;
+				label = "userled:1";
+				linux,default-trigger = "usr";
+				default-state = "off";
+			};
+		};
+	};
+
+	smb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40200000 0x10000>,
+			 <1 0 0xa0000000 0x10000>;
+	};
+};
diff --git a/arch/arm/boot/dts/arm/versatile-ab-ib2.dts b/arch/arm/boot/dts/arm/versatile-ab-ib2.dts
new file mode 100644
index 0000000000000..7ebb0dfd04670
--- /dev/null
+++ b/arch/arm/boot/dts/arm/versatile-ab-ib2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The Versatile AB with the IB2 expansion board mounted.
+ * This works as a superset of the Versatile AB.
+ */
+
+#include "versatile-ab.dts"
+
+/ {
+	model = "ARM Versatile AB + IB2 board";
+
+	/* Special IB2 control register */
+	syscon@27000000 {
+		compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
+		reg = <0x27000000 0x4>;
+		ranges = <0x0 0x27000000 0x4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		led@0,4 {
+			compatible = "register-bit-led";
+			reg = <0x00 0x04>;
+			offset = <0x00>;
+			mask = <0x10>;
+			label = "versatile-ib2:0";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/versatile-ab.dts b/arch/arm/boot/dts/arm/versatile-ab.dts
new file mode 100644
index 0000000000000..f31dcf7e5862e
--- /dev/null
+++ b/arch/arm/boot/dts/arm/versatile-ab.dts
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/ {
+	model = "ARM Versatile AB";
+	compatible = "arm,versatile-ab";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		i2c0 = &i2c0;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	bridge {
+		compatible = "ti,ths8134b", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	core-module@10000000 {
+		compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
+		reg = <0x10000000 0x200>;
+		ranges = <0x0 0x10000000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		led@8,0 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x01>;
+			label = "versatile:0";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+		led@8,1 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x02>;
+			label = "versatile:1";
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+		led@8,2 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x04>;
+			label = "versatile:2";
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+		led@8,3 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x08>;
+			label = "versatile:3";
+			default-state = "off";
+		};
+		led@8,4 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x10>;
+			label = "versatile:4";
+			default-state = "off";
+		};
+		led@8,5 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x20>;
+			label = "versatile:5";
+			default-state = "off";
+		};
+		led@8,6 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x40>;
+			label = "versatile:6";
+			default-state = "off";
+		};
+		led@8,7 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x80>;
+			label = "versatile:7";
+			default-state = "off";
+		};
+
+		/* OSC1 on AB, OSC4 on PB */
+		osc1: cm_aux_osc@24M {
+			#clock-cells = <0>;
+			compatible = "arm,versatile-cm-auxosc";
+			clocks = <&xtal24mhz>;
+		};
+
+		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
+		timclk: timclk@1M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <24>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+
+		pclk: pclk@24M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+	};
+
+	flash@34000000 {
+		/* 64 MiB NOR flash in non-interleaved chips */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x34000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	i2c0: i2c@10002000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "arm,versatile-i2c";
+		reg = <0x10002000 0x1000>;
+
+		rtc@68 {
+			compatible = "dallas,ds1338";
+			reg = <0x68>;
+		};
+	};
+
+	net@10010000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x10010000 0x10000>;
+		interrupts = <25>;
+	};
+
+	lcd@10008000 {
+		compatible = "arm,versatile-lcd";
+		reg = <0x10008000 0x1000>;
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic: interrupt-controller@10140000 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10140000 0x1000>;
+			valid-mask = <0xffffffff>;
+		};
+
+		sic: interrupt-controller@10003000 {
+			compatible = "arm,versatile-sic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10003000 0x1000>;
+			interrupt-parent = <&vic>;
+			interrupts = <31>; /* Cascaded to vic */
+			clear-mask = <0xffffffff>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * table 4-36 page 4-50 of ARM DUI 0225D
+			 */
+			valid-mask = <0x0760031b>;
+		};
+
+		dma@10130000 {
+			compatible = "arm,pl081", "arm,primecell";
+			reg = <0x10130000 0x1000>;
+			interrupts = <17>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: serial@101f1000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f1000 0x1000>;
+			interrupts = <12>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: serial@101f2000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f2000 0x1000>;
+			interrupts = <13>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart2: serial@101f3000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f3000 0x1000>;
+			interrupts = <14>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		smc@10100000 {
+			compatible = "arm,primecell";
+			reg = <0x10100000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mpmc@10110000 {
+			compatible = "arm,primecell";
+			reg = <0x10110000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		display@10120000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x10120000 0x1000>;
+			interrupts = <16>;
+			clocks = <&osc1>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 800x600 16bpp @ 36MHz works fine */
+			max-memory-bandwidth = <54000000>;
+
+			/*
+			 * This port is routed through a PLD (Programmable
+			 * Logic Device) that routes the output from the CLCD
+			 * (after transformations) to the VGA DAC and also an
+			 * external panel connector. The PLD is essential for
+			 * supporting RGB565/BGR565.
+			 *
+			 * The signals from the port thus reaches two endpoints.
+			 * The PLD is managed through a few special bits in the
+			 * FPGA "sysreg".
+			 *
+			 * This arrangement can be clearly seen in
+			 * ARM DUI 0225D, page 3-41, figure 3-19.
+			 */
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clcd_pads_panel: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&panel_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+				clcd_pads_vga_dac: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+
+		sctl@101e0000 {
+			compatible = "arm,primecell";
+			reg = <0x101e0000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		watchdog@101e1000 {
+			compatible = "arm,primecell";
+			reg = <0x101e1000 0x1000>;
+			interrupts = <0>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer@101e2000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x101e2000 0x1000>;
+			interrupts = <4>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0", "timer1", "apb_pclk";
+		};
+
+		timer@101e3000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x101e3000 0x1000>;
+			interrupts = <5>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0", "timer1", "apb_pclk";
+		};
+
+		gpio0: gpio@101e4000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e4000 0x1000>;
+			gpio-controller;
+			interrupts = <6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@101e5000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e5000 0x1000>;
+			interrupts = <7>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc@101e8000 {
+			compatible = "arm,pl030", "arm,primecell";
+			reg = <0x101e8000 0x1000>;
+			interrupts = <10>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		sci@101f0000 {
+			compatible = "arm,primecell";
+			reg = <0x101f0000 0x1000>;
+			interrupts = <15>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		spi@101f4000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x101f4000 0x1000>;
+			interrupts = <11>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		fpga {
+			compatible = "arm,versatile-fpga", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x10000000 0x10000>;
+
+			sysreg@0 {
+				compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
+				reg = <0x00000 0x1000>;
+
+				panel: display@0 {
+					compatible = "arm,versatile-tft-panel";
+
+					port {
+						panel_in: endpoint {
+							remote-endpoint = <&clcd_pads_panel>;
+						};
+					};
+				};
+			};
+
+			aaci@4000 {
+				compatible = "arm,primecell";
+				reg = <0x4000 0x1000>;
+				interrupts = <24>;
+				clocks = <&pclk>;
+				clock-names = "apb_pclk";
+			};
+			mmc@5000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0x5000 0x1000>;
+				interrupts-extended = <&vic 22 &sic 1>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "mclk", "apb_pclk";
+			};
+			kmi@6000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x6000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <3>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+			kmi@7000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x7000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <4>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/versatile-pb.dts b/arch/arm/boot/dts/arm/versatile-pb.dts
new file mode 100644
index 0000000000000..fc21ce54b33a5
--- /dev/null
+++ b/arch/arm/boot/dts/arm/versatile-pb.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "versatile-ab.dts"
+
+/ {
+	model = "ARM Versatile PB";
+	compatible = "arm,versatile-pb";
+
+	amba {
+		/* The Versatile PB is using more SIC IRQ lines than the AB */
+		sic: interrupt-controller@10003000 {
+			clear-mask = <0xffffffff>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * figure 3-30 page 3-74 of ARM DUI 0224B
+			 */
+			valid-mask = <0x7fe003ff>;
+		};
+
+		gpio2: gpio@101e6000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e6000 0x1000>;
+			interrupts = <8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@101e7000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e7000 0x1000>;
+			interrupts = <9>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pci@10001000 {
+			compatible = "arm,versatile-pci";
+			device_type = "pci";
+			reg = <0x10001000 0x1000
+			       0x41000000 0x10000
+			       0x42000000 0x100000>;
+			bus-range = <0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			ranges = <0x01000000 0 0x00000000 0x43000000 0 0x00010000   /* downstream I/O */
+				  0x02000000 0 0x50000000 0x50000000 0 0x10000000   /* non-prefetchable memory */
+				  0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */
+
+			interrupt-map-mask = <0x1800 0 0 7>;
+			interrupt-map = <0x1800 0 0 1 &sic 28
+					 0x1800 0 0 2 &sic 29
+					 0x1800 0 0 3 &sic 30
+					 0x1800 0 0 4 &sic 27
+
+					 0x1000 0 0 1 &sic 27
+					 0x1000 0 0 2 &sic 28
+					 0x1000 0 0 3 &sic 29
+					 0x1000 0 0 4 &sic 30
+
+					 0x0800 0 0 1 &sic 30
+					 0x0800 0 0 2 &sic 27
+					 0x0800 0 0 3 &sic 28
+					 0x0800 0 0 4 &sic 29
+
+					 0x0000 0 0 1 &sic 29
+					 0x0000 0 0 2 &sic 30
+					 0x0000 0 0 3 &sic 27
+					 0x0000 0 0 4 &sic 28>;
+		};
+
+		fpga {
+			mmc@5000 {
+				/*
+				 * Overrides the interrupt assignment from
+				 * the Versatile AB board file.
+				 */
+				interrupts-extended = <&sic 22 &sic 23>;
+			};
+			serial@9000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x9000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <6>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+			sci@a000 {
+				compatible = "arm,primecell";
+				reg = <0xa000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <5>;
+				clocks = <&xtal24mhz>;
+				clock-names = "apb_pclk";
+			};
+			mmc@b000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0xb000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <1>, <2>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "mclk", "apb_pclk";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
new file mode 100644
index 0000000000000..8af4b77fe655d
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	v2m_fixed_3v3: fixed-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v2m_clk24mhz: clk24mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "v2m:clk24mhz";
+	};
+
+	v2m_refclk1mhz: refclk1mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "v2m:refclk1mhz";
+	};
+
+	v2m_refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "v2m:refclk32khz";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "v2m:green:user1";
+			gpios = <&v2m_led_gpios 0 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "v2m:green:user2";
+			gpios = <&v2m_led_gpios 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-3 {
+			label = "v2m:green:user3";
+			gpios = <&v2m_led_gpios 2 0>;
+			linux,default-trigger = "cpu0";
+		};
+
+		led-4 {
+			label = "v2m:green:user4";
+			gpios = <&v2m_led_gpios 3 0>;
+			linux,default-trigger = "cpu1";
+		};
+
+		led-5 {
+			label = "v2m:green:user5";
+			gpios = <&v2m_led_gpios 4 0>;
+			linux,default-trigger = "cpu2";
+		};
+
+		led-6 {
+			label = "v2m:green:user6";
+			gpios = <&v2m_led_gpios 5 0>;
+			linux,default-trigger = "cpu3";
+		};
+
+		led-7 {
+			label = "v2m:green:user7";
+			gpios = <&v2m_led_gpios 6 0>;
+			linux,default-trigger = "cpu4";
+		};
+
+		led-8 {
+			label = "v2m:green:user8";
+			gpios = <&v2m_led_gpios 7 0>;
+			linux,default-trigger = "cpu5";
+		};
+	};
+
+	bus@8000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@8000000 {
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0x08000000 0x04000000>,
+				 <1 0 0x14000000 0x04000000>,
+				 <2 0 0x18000000 0x04000000>,
+				 <3 0 0x1c000000 0x04000000>,
+				 <4 0 0x0c000000 0x04000000>,
+				 <5 0 0x10000000 0x04000000>;
+
+			nor_flash: flash@0 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <4 0x00000000 0x04000000>;
+				bank-width = <4>;
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			psram@100000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <1 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@202000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@203000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <2 0x03000000 0x20000>;
+				interrupts = <16>;
+				dr_mode = "peripheral";
+			};
+
+			iofpga-bus@300000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
+
+				v2m_sysreg: sysreg@10000 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x010000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x10000 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@30000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x030000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@40000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x040000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmc@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: serial@90000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x090000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: serial@a0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: serial@b0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b0000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: serial@c0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c0000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				watchdog@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@160000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x160000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in: endpoint {
+									remote-endpoint = <&clcd_pads>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a0000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a0000 0x100
+					       0x1a0100 0xf00>;
+					reg-shift = <2>;
+				};
+
+				clcd@1f0000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f0000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads: endpoint {
+							remote-endpoint = <&dvi_bridge_in>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+
+				mcc {
+					compatible = "arm,vexpress,config-bus";
+					arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+					oscclk0 {
+						/* MCC static memory clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 0>;
+						freq-range = <25000000 60000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk0";
+					};
+
+					v2m_oscclk1: oscclk1 {
+						/* CLCD clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 1>;
+						freq-range = <23750000 65000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk1";
+					};
+
+					v2m_oscclk2: oscclk2 {
+						/* IO FPGA peripheral clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 2>;
+						freq-range = <24000000 24000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk2";
+					};
+
+					volt-vio {
+						/* Logic level voltage */
+						compatible = "arm,vexpress-volt";
+						arm,vexpress-sysreg,func = <2 0>;
+						regulator-name = "VIO";
+						regulator-always-on;
+						label = "VIO";
+					};
+
+					temp-mcc {
+						/* MCC internal operating temperature */
+						compatible = "arm,vexpress-temp";
+						arm,vexpress-sysreg,func = <4 0>;
+						label = "MCC";
+					};
+
+					reset {
+						compatible = "arm,vexpress-reset";
+						arm,vexpress-sysreg,func = <5 0>;
+					};
+
+					muxfpga {
+						compatible = "arm,vexpress-muxfpga";
+						arm,vexpress-sysreg,func = <7 0>;
+					};
+
+					shutdown {
+						compatible = "arm,vexpress-shutdown";
+						arm,vexpress-sysreg,func = <8 0>;
+					};
+
+					reboot {
+						compatible = "arm,vexpress-reboot";
+						arm,vexpress-sysreg,func = <9 0>;
+					};
+
+					dvimode {
+						compatible = "arm,vexpress-dvimode";
+						arm,vexpress-sysreg,func = <11 0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2m.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
new file mode 100644
index 0000000000000..c5e92f6d2fcd8
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * Original memory map ("Legacy memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m-rs1.dtsi!
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	bus@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x10000000>,
+			 <0x10000000 0x10000000 0x00020000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@40000000 {
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0x40000000 0x04000000>,
+				 <1 0 0x44000000 0x04000000>,
+				 <2 0 0x48000000 0x04000000>,
+				 <3 0 0x4c000000 0x04000000>,
+				 <7 0 0x10000000 0x00020000>;
+
+			flash@0,00000000 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <1 0x00000000 0x04000000>;
+				bank-width = <4>;
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			psram@2,00000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <2 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@3,02000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <3 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@3,03000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <3 0x03000000 0x20000>;
+				interrupts = <16>;
+				dr_mode = "peripheral";
+			};
+
+			iofpga@7,00000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 7 0 0x20000>;
+
+				v2m_sysreg: sysreg@0 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x00000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@1000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x01000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@2000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x02000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@4000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x04000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmci@5000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x05000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@6000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x06000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@7000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x07000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: serial@9000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x09000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: serial@a000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: serial@b000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: serial@c000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				wdt@f000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@11000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x11000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@12000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x12000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@16000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x16000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							/*
+							 * Both the core tile and the motherboard routes their output
+							 * pads to this transmitter. The motherboard system controller
+							 * can select one of them as input using a mux register in
+							 * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
+							 * the only platform with this specific set-up.
+							 */
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in_ct: endpoint {
+									remote-endpoint = <&clcd_pads_ct>;
+								};
+							};
+							port@1 {
+								reg = <1>;
+								dvi_bridge_in_mb: endpoint {
+									remote-endpoint = <&clcd_pads_mb>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@17000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x17000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a000 0x100
+					       0x1a100 0xf00>;
+					reg-shift = <2>;
+				};
+
+
+				clcd@1f000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads_mb: endpoint {
+							remote-endpoint = <&dvi_bridge_in_mb>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+			};
+
+			v2m_fixed_3v3: fixed-regulator-0 {
+				compatible = "regulator-fixed";
+				regulator-name = "3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			v2m_clk24mhz: clk24mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+				clock-output-names = "v2m:clk24mhz";
+			};
+
+			v2m_refclk1mhz: refclk1mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <1000000>;
+				clock-output-names = "v2m:refclk1mhz";
+			};
+
+			v2m_refclk32khz: refclk32khz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+				clock-output-names = "v2m:refclk32khz";
+			};
+
+			leds {
+				compatible = "gpio-leds";
+
+				led-user1 {
+					label = "v2m:green:user1";
+					gpios = <&v2m_led_gpios 0 0>;
+					linux,default-trigger = "heartbeat";
+				};
+
+				led-user2 {
+					label = "v2m:green:user2";
+					gpios = <&v2m_led_gpios 1 0>;
+					linux,default-trigger = "mmc0";
+				};
+
+				led-user3 {
+					label = "v2m:green:user3";
+					gpios = <&v2m_led_gpios 2 0>;
+					linux,default-trigger = "cpu0";
+				};
+
+				led-user4 {
+					label = "v2m:green:user4";
+					gpios = <&v2m_led_gpios 3 0>;
+					linux,default-trigger = "cpu1";
+				};
+
+				led-user5 {
+					label = "v2m:green:user5";
+					gpios = <&v2m_led_gpios 4 0>;
+					linux,default-trigger = "cpu2";
+				};
+
+				led-user6 {
+					label = "v2m:green:user6";
+					gpios = <&v2m_led_gpios 5 0>;
+					linux,default-trigger = "cpu3";
+				};
+
+				led-user7 {
+					label = "v2m:green:user7";
+					gpios = <&v2m_led_gpios 6 0>;
+					linux,default-trigger = "cpu4";
+				};
+
+				led-user8 {
+					label = "v2m:green:user8";
+					gpios = <&v2m_led_gpios 7 0>;
+					linux,default-trigger = "cpu5";
+				};
+			};
+
+			mcc {
+				compatible = "arm,vexpress,config-bus";
+				arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+				oscclk0 {
+					/* MCC static memory clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 0>;
+					freq-range = <25000000 60000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk0";
+				};
+
+				v2m_oscclk1: oscclk1 {
+					/* CLCD clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 1>;
+					freq-range = <23750000 65000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk1";
+				};
+
+				v2m_oscclk2: oscclk2 {
+					/* IO FPGA peripheral clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 2>;
+					freq-range = <24000000 24000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk2";
+				};
+
+				volt-vio {
+					/* Logic level voltage */
+					compatible = "arm,vexpress-volt";
+					arm,vexpress-sysreg,func = <2 0>;
+					regulator-name = "VIO";
+					regulator-always-on;
+					label = "VIO";
+				};
+
+				temp-mcc {
+					/* MCC internal operating temperature */
+					compatible = "arm,vexpress-temp";
+					arm,vexpress-sysreg,func = <4 0>;
+					label = "MCC";
+				};
+
+				reset {
+					compatible = "arm,vexpress-reset";
+					arm,vexpress-sysreg,func = <5 0>;
+				};
+
+				muxfpga {
+					compatible = "arm,vexpress-muxfpga";
+					arm,vexpress-sysreg,func = <7 0>;
+				};
+
+				shutdown {
+					compatible = "arm,vexpress-shutdown";
+					arm,vexpress-sysreg,func = <8 0>;
+				};
+
+				reboot {
+					compatible = "arm,vexpress-reboot";
+					arm,vexpress-sysreg,func = <9 0>;
+				};
+
+				dvimode {
+					compatible = "arm,vexpress-dvimode";
+					arm,vexpress-sysreg,func = <11 0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
new file mode 100644
index 0000000000000..679537e17ff5c
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A15x2 (version with Test Chip 1)
+ * Cortex-A15 MPCore (V2P-CA15)
+ *
+ * HBI-0237A
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA15";
+	arm,hbi = <0x237>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	hdlcd@2b000000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x2b000000 0 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2b0a0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0 0x2b0a0000 0 0x1000>;
+		clocks = <&sys_pll>;
+		clock-names = "apb_pclk";
+	};
+
+	wdt@2b060000 {
+		compatible = "arm,sp805", "arm,primecell";
+		status = "disabled";
+		reg = <0 0x2b060000 0 0x1000>;
+		interrupts = <0 98 4>;
+		clocks = <&sys_pll>, <&sys_pll>;
+		clock-names = "wdog_clk", "apb_pclk";
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&sys_pll>;
+		clock-names = "apb_pclk";
+	};
+
+	dma@7ffb0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0 0x7ffb0000 0 0x1000>;
+		interrupts = <0 92 4>,
+			     <0 88 4>,
+			     <0 89 4>,
+			     <0 90 4>,
+			     <0 91 4>;
+		clocks = <&sys_pll>;
+		clock-names = "apb_pclk";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		oscclk0 {
+			/* CPU PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		oscclk4 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		hdlcd_clk: oscclk5 {
+			/* HDLCD PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		smbclk: oscclk6 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 6>;
+			freq-range = <20000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk6";
+		};
+
+		sys_pll: oscclk7 {
+			/* SYS PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 7>;
+			freq-range = <20000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk7";
+		};
+
+		oscclk8 {
+			/* DDR2 PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 8>;
+			freq-range = <40000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk8";
+		};
+
+		volt-cores {
+			/* CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "Cores";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "Cores";
+		};
+
+		amp-cores {
+			/* Total current for the two cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "Cores";
+		};
+
+		temp-dcc {
+			/* DCC internal temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+
+		power-cores {
+			/* Total power */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "Cores";
+		};
+
+		energy {
+			/* Total energy */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 0>;
+			label = "Cores";
+		};
+	};
+
+	bus@8000000 {
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40000000 0x3fef0000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
new file mode 100644
index 0000000000000..511e87cc2bc5e
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
@@ -0,0 +1,636 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A15x2 A7x3
+ * Cortex-A15_A7 MPCore (V2P-CA15_A7)
+ *
+ * HBI-0249A
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA15_CA7";
+	arm,hbi = <0x249>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			cci-control-port = <&cci_control1>;
+			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <990>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			cci-control-port = <&cci_control1>;
+			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <990>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
+		};
+
+		cpu4: cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
+		};
+
+		idle-states {
+			CLUSTER_SLEEP_BIG: cluster-sleep-big {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_LITTLE: cluster-sleep-little {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <500>;
+				min-residency-us = <2500>;
+			};
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	wdt@2a490000 {
+		compatible = "arm,sp805", "arm,primecell";
+		reg = <0 0x2a490000 0 0x1000>;
+		interrupts = <0 98 4>;
+		clocks = <&oscclk6a>, <&oscclk6a>;
+		clock-names = "wdog_clk", "apb_pclk";
+	};
+
+	hdlcd@2b000000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x2b000000 0 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2b0a0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0 0x2b0a0000 0 0x1000>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	cci@2c090000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0x2c090000 0 0x1000>;
+		ranges = <0x0 0x0 0x2c090000 0x10000>;
+
+		cci_control1: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+
+		pmu@9000 {
+			 compatible = "arm,cci-400-pmu,r0";
+			 reg = <0x9000 0x5000>;
+			 interrupts = <0 105 4>,
+				      <0 101 4>,
+				      <0 102 4>,
+				      <0 103 4>,
+				      <0 104 4>;
+		};
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+	dma@7ff00000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0 0x7ff00000 0 0x1000>;
+		interrupts = <0 92 4>,
+			     <0 88 4>,
+			     <0 89 4>,
+			     <0 90 4>,
+			     <0 91 4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+        scc@7fff0000 {
+		compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+		reg = <0 0x7fff0000 0 0x1000>;
+		interrupts = <0 95 4>;
+        };
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	pmu-a15 {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>;
+	};
+
+	pmu-a7 {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <0 128 4>,
+			     <0 129 4>,
+			     <0 130 4>;
+		interrupt-affinity = <&cpu2>,
+				     <&cpu3>,
+				     <&cpu4>;
+	};
+
+	oscclk6a: oscclk6a {
+		/* Reference 24MHz clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "oscclk6a";
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		oscclk0 {
+			/* A15 PLL 0 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		oscclk1 {
+			/* A15 PLL 1 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		oscclk2 {
+			/* A7 PLL 0 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		oscclk3 {
+			/* A7 PLL 1 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		oscclk4 {
+			/* External AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		hdlcd_clk: oscclk5 {
+			/* HDLCD PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		smbclk: oscclk6 {
+			/* Static memory controller clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 6>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk6";
+		};
+
+		oscclk7 {
+			/* SYS PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 7>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk7";
+		};
+
+		oscclk8 {
+			/* DDR2 PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 8>;
+			freq-range = <20000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk8";
+		};
+
+		volt-a15 {
+			/* A15 CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "A15 Vcore";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "A15 Vcore";
+		};
+
+		volt-a7 {
+			/* A7 CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "A7 Vcore";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "A7 Vcore";
+		};
+
+		amp-a15 {
+			/* Total current for the two A15 cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "A15 Icore";
+		};
+
+		amp-a7 {
+			/* Total current for the three A7 cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 1>;
+			label = "A7 Icore";
+		};
+
+		temp-dcc {
+			/* DCC internal temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+
+		power-a15 {
+			/* Total power for the two A15 cores */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "A15 Pcore";
+		};
+
+		power-a7 {
+			/* Total power for the three A7 cores */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 1>;
+			label = "A7 Pcore";
+		};
+
+		energy-a15 {
+			/* Total energy for the two A15 cores */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 0>, <13 1>;
+			label = "A15 Jcore";
+		};
+
+		energy-a7 {
+			/* Total energy for the three A7 cores */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 2>, <13 3>;
+			label = "A7 Jcore";
+		};
+	};
+
+	etb@20010000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port0>;
+				};
+			};
+		};
+	};
+
+	tpiu@20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				tpiu_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+	};
+
+	replicator {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator_in_port0: endpoint {
+					remote-endpoint = <&funnel_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@20040000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel_in_port0: endpoint {
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel_in_port1: endpoint {
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel_in_port2: endpoint {
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			/* Input port #3 is for ITM, not supported here */
+
+			port@4 {
+				reg = <4>;
+				funnel_in_port4: endpoint {
+					remote-endpoint = <&etm1_out_port>;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				funnel_in_port5: endpoint {
+					remote-endpoint = <&etm2_out_port>;
+				};
+			};
+		};
+	};
+
+	ptm@2201c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201c000 0 0x1000>;
+
+		cpu = <&cpu0>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@2201d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201d000 0 0x1000>;
+
+		cpu = <&cpu1>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	etm@2203c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203c000 0 0x1000>;
+
+		cpu = <&cpu2>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port2>;
+				};
+			};
+		};
+	};
+
+	etm@2203d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203d000 0 0x1000>;
+
+		cpu = <&cpu3>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port4>;
+				};
+			};
+		};
+	};
+
+	etm@2203e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203e000 0 0x1000>;
+
+		cpu = <&cpu4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm2_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port5>;
+				};
+			};
+		};
+	};
+
+	smb: bus@8000000 {
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40000000 0x3fef0000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
+
+&nor_flash {
+	/*
+	 * Unfortunately, accessing the flash disturbs the CPU idle states
+	 * (suspend) and CPU hotplug of this platform. For this reason, flash
+	 * hardware access is disabled by default on this platform alone.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
new file mode 100644
index 0000000000000..ff1f9a1bcfcfc
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A5x2
+ * Cortex-A5 MPCore (V2P-CA5s)
+ *
+ * HBI-0225B
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA5s";
+	arm,hbi = <0x225>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x18000000 0x00800000>;
+			no-map;
+		};
+	};
+
+	hdlcd@2a110000 {
+		compatible = "arm,hdlcd";
+		reg = <0x2a110000 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2a150000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0x2a150000 0x1000>;
+		clocks = <&axi_clk>;
+		clock-names = "apb_pclk";
+	};
+
+	memory-controller@2a190000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0x2a190000 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&axi_clk>;
+		clock-names = "apb_pclk";
+	};
+
+	scu@2c000000 {
+		compatible = "arm,cortex-a5-scu";
+		reg = <0x2c000000 0x58>;
+	};
+
+	timer@2c000600 {
+		compatible = "arm,cortex-a5-twd-timer";
+		reg = <0x2c000600 0x20>;
+		interrupts = <1 13 0x304>;
+	};
+
+	timer@2c000200 {
+		compatible = "arm,cortex-a5-global-timer",
+		             "arm,cortex-a9-global-timer";
+		reg = <0x2c000200 0x20>;
+		interrupts = <1 11 0x304>;
+		clocks = <&cpu_clk>;
+	};
+
+	watchdog@2c000620 {
+		compatible = "arm,cortex-a5-twd-wdt";
+		reg = <0x2c000620 0x20>;
+		interrupts = <1 14 0x304>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x2c001000 0x1000>,
+		      <0x2c000100 0x100>;
+	};
+
+	L2: cache-controller@2c0f0000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x2c0f0000 0x1000>;
+		interrupts = <0 84 4>;
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		cpu_clk: oscclk0 {
+			/* CPU and internal AXI reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		axi_clk: oscclk1 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <5000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		oscclk2 {
+			/* DDR2 */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <80000000 120000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		hdlcd_clk: oscclk3 {
+			/* HDLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		oscclk4 {
+			/* Test chip gate configuration */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <80000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		smbclk: oscclk5 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <25000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		temp-dcc {
+			/* DCC internal operating temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+	};
+
+	smb: bus@8000000 {
+		ranges = <0 0x8000000 0x18000000>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
new file mode 100644
index 0000000000000..5916e4877eace
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A9x4
+ * Cortex-A9 MPCore (V2P-CA9)
+ *
+ * HBI-0191B
+ */
+
+/dts-v1/;
+#include "vexpress-v2m.dtsi"
+
+/ {
+	model = "V2P-CA9";
+	arm,hbi = <0x191>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A9_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Chipselect 3 is physically at 0x4c000000 */
+		vram: vram@4c000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x4c000000 0x00800000>;
+			no-map;
+		};
+	};
+
+	clcd@10020000 {
+		compatible = "arm,pl111", "arm,primecell";
+		reg = <0x10020000 0x1000>;
+		interrupt-names = "combined";
+		interrupts = <0 44 4>;
+		clocks = <&oscclk1>, <&oscclk2>;
+		clock-names = "clcdclk", "apb_pclk";
+		/* 1024x768 16bpp @65MHz */
+		max-memory-bandwidth = <95000000>;
+
+		port {
+			clcd_pads_ct: endpoint {
+				remote-endpoint = <&dvi_bridge_in_ct>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+	};
+
+	memory-controller@100e0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0x100e0000 0x1000>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
+	};
+
+	memory-controller@100e1000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0x100e1000 0x1000>;
+		interrupts = <0 45 4>,
+			     <0 46 4>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
+	};
+
+	timer@100e4000 {
+		compatible = "arm,sp804", "arm,primecell";
+		reg = <0x100e4000 0x1000>;
+		interrupts = <0 48 4>,
+			     <0 49 4>;
+		clocks = <&oscclk2>, <&oscclk2>, <&oscclk2>;
+		clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		status = "disabled";
+	};
+
+	watchdog@100e5000 {
+		compatible = "arm,sp805", "arm,primecell";
+		reg = <0x100e5000 0x1000>;
+		interrupts = <0 51 4>;
+		clocks = <&oscclk2>, <&oscclk2>;
+		clock-names = "wdog_clk", "apb_pclk";
+	};
+
+	scu@1e000000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1e000000 0x58>;
+	};
+
+	timer@1e000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1e000600 0x20>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	watchdog@1e000620 {
+		compatible = "arm,cortex-a9-twd-wdt";
+		reg = <0x1e000620 0x20>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	gic: interrupt-controller@1e001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x1e001000 0x1000>,
+		      <0x1e000100 0x100>;
+	};
+
+	L2: cache-controller@1e00a000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x1e00a000 0x1000>;
+		interrupts = <0 43 4>;
+		cache-unified;
+		cache-level = <2>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <1 1 1>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+		interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		oscclk0: extsaxiclk {
+			/* ACLK clock to the AXI master port on the test chip */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <30000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "extsaxiclk";
+		};
+
+		oscclk1: clcdclk {
+			/* Reference clock for the CLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <10000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "clcdclk";
+		};
+
+		smbclk: oscclk2: tcrefclk {
+			/* Reference clock for the test chip internal PLLs */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <33000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "tcrefclk";
+		};
+
+		volt-vd10 {
+			/* Test Chip internal logic voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "VD10";
+			regulator-always-on;
+			label = "VD10";
+		};
+
+		volt-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "VD10_S2";
+			regulator-always-on;
+			label = "VD10_S2";
+		};
+
+		volt-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 2>;
+			regulator-name = "VD10_S3";
+			regulator-always-on;
+			label = "VD10_S3";
+		};
+
+		volt-vcc1v8 {
+			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 3>;
+			regulator-name = "VCC1V8";
+			regulator-always-on;
+			label = "VCC1V8";
+		};
+
+		volt-ddr2vtt {
+			/* DDR2 SDRAM VTT termination voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 4>;
+			regulator-name = "DDR2VTT";
+			regulator-always-on;
+			label = "DDR2VTT";
+		};
+
+		volt-vcc3v3 {
+			/* Local board supply for miscellaneous logic external to the Test Chip */
+			arm,vexpress-sysreg,func = <2 5>;
+			compatible = "arm,vexpress-volt";
+			regulator-name = "VCC3V3";
+			regulator-always-on;
+			label = "VCC3V3";
+		};
+
+		amp-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "VD10_S2";
+		};
+
+		amp-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 1>;
+			label = "VD10_S3";
+		};
+
+		power-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "PVD10_S2";
+		};
+
+		power-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 1>;
+			label = "PVD10_S3";
+		};
+	};
+
+	site2: hsb@e0000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xe0000000 0x20000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-c200-v2.dts b/arch/arm/boot/dts/armada-370-c200-v2.dts
deleted file mode 100644
index 84d40e1d70eff..0000000000000
--- a/arch/arm/boot/dts/armada-370-c200-v2.dts
+++ /dev/null
@@ -1,388 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Ctera C200-V2
- *
- * Copyright (C) 2022 Pawel Dembicki <paweldembicki@gmail.com>
- */
-
-/dts-v1/;
-
-#include "armada-370.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Ctera C200 V2";
-	compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1024 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-	};
-
-	thermal-zones {
-		ethphy-thermal {
-			polling-delay = <20000>;
-			polling-delay-passive = <2000>;
-
-			thermal-sensors = <&ethphy0>;
-
-			trips {
-				ethphy_alert1: trip1 {
-					temperature = <65000>;
-					hysteresis = <4000>;
-					type = "passive";
-				};
-
-				ethphy_crit: trip2 {
-					temperature = <100000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	beeper {
-		compatible = "pwm-beeper";
-		pinctrl-0 = <&pmx_beeper>;
-		pinctrl-names = "default";
-		pwms = <&gpio1 31 4000>;
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-
-		button-power {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		button-reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-		};
-
-		button-usb1 {
-			label = "USB1 Button";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-		};
-
-		button-usb2 {
-			label = "USB2 Button";
-			linux,code = <BTN_1>;
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
-		pinctrl-names = "default";
-
-		led-0 {
-			function = LED_FUNCTION_USB;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		};
-
-		led-1 {
-			function = LED_FUNCTION_USB;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led-2 {
-			function = LED_FUNCTION_USB;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-
-		led-3 {
-			function = LED_FUNCTION_USB;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-
-		led-4 {
-			function = LED_FUNCTION_DISK;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-
-		led-5 {
-			function = LED_FUNCTION_DISK;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
-		};
-
-		led-6 {
-			function = LED_FUNCTION_DISK;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-		};
-
-		led-7 {
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-8 {
-			function = LED_FUNCTION_DISK_ERR;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-		};
-
-		led-9 {
-			function = LED_FUNCTION_DISK_ERR;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-		};
-
-		led-10 {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-		};
-
-		led-11 {
-			function = LED_FUNCTION_DISK;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-		};
-
-		led-12 {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&coherencyfab {
-	broken-idle;
-};
-
-&eth1 {
-	pinctrl-0 = <&ge1_rgmii_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	phy-handle = <&ethphy0>;
-	phy-connection-type = "rgmii-id";
-};
-
-&i2c0 {
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-	clock-frequency = <100000>;
-	status = "okay";
-
-	hwmon@2a {
-		compatible = "nuvoton,nct7802";
-		reg = <0x2a>;
-	};
-
-	rtc@30 {
-		compatible = "sii,s35390a";
-		reg = <0x30>;
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-
-	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0000000 0x200000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "certificate";
-				reg = <0x0200000 0x100000>;
-				read-only;
-			};
-
-			partition@300000 {
-				label = "preset_cfg";
-				reg = <0x0300000 0x100000>;
-				read-only;
-			};
-
-			partition@400000 {
-				label = "dev_params";
-				reg = <0x0400000 0x100000>;
-				read-only;
-			};
-			partition@500000 {
-				label = "active_bank";
-				reg = <0x0500000 0x0100000>;
-			};
-
-			partition@600000 {
-				label = "magic";
-				reg = <0x0600000 0x0100000>;
-				read-only;
-			};
-
-			partition@700000 {
-				label = "bank1";
-				reg = <0x0700000 0x2800000>;
-			};
-
-			partition@2f00000 {
-				label = "bank2";
-				reg = <0x2f00000 0x2800000>;
-			};
-
-			/* 0x5700000-0x5a00000 undefined in vendor firmware */
-
-			partition@5a00000 {
-				label = "reserved";
-				reg = <0x5a00000 0x2000000>;
-			};
-
-			partition@7a00000 {
-				label = "rootfs";
-				reg = <0x7a00000 0x8600000>;
-			};
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */
-		pinctrl-0 = <&pmx_pcie>;
-		pinctrl-names = "default";
-		status = "okay";
-		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&pinctrl {
-	pmx_poweroff: pmx-poweroff {
-		marvell,pins = "mpp7";
-		marvell,function = "gpo";
-	};
-
-	pmx_power_cpu: pmx-power-cpu {
-		marvell,pins = "mpp4";
-		marvell,function = "vdd";
-	};
-
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
-		marvell,function = "gpio";
-	};
-
-	pmx_leds1: pmx-leds1 {
-		marvell,pins = "mpp47";
-		marvell,function = "gpo";
-	};
-
-	pmx_leds2: pmx-leds2 {
-		marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
-			       "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
-		marvell,function = "gpio";
-	};
-
-	pmx_pcie: pmx-pcie {
-		marvell,pins = "mpp59";
-		marvell,function = "gpio";
-	};
-
-	pmx_beeper: pmx-beeper {
-		marvell,pins = "mpp63";
-		marvell,function = "gpio";
-	};
-};
-
-&pmsu {
-	pinctrl-0 = <&pmx_power_cpu>;
-	pinctrl-names = "default";
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&sata {
-	nr-ports = <2>;
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hdd0_temp: sata-port@0 {
-		reg = <0>;
-		#thermal-sensor-cells = <0>;
-	};
-
-	hdd1_temp: sata-port@1 {
-		reg = <1>;
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
deleted file mode 100644
index a7dc4c04d10bd..0000000000000
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ /dev/null
@@ -1,244 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada 370 evaluation board
- * (DB-88F6710-BP-DDR3)
- *
- *  Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-370.dtsi"
-
-/ {
-	model = "Marvell Armada 370 Evaluation Board";
-	compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			i2c@11000 {
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				clock-frequency = <100000>;
-				status = "okay";
-				audio_codec: audio-codec@4a {
-					#sound-dai-cells = <0>;
-					compatible = "cirrus,cs42l51";
-					reg = <0x4a>;
-				};
-			};
-
-			audio-controller@30000 {
-				pinctrl-0 = <&i2s_pins2>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins1>;
-				pinctrl-names = "default";
-				/*
-				 * This device is disabled by default, because
-				 * using the SD card connector requires
-				 * changing the default CON40 connector
-				 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
-				 * different connector
-				 * "DB-88F6710_MPP_RGMII_SD_Jumper".
-				 */
-				status = "disabled";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Armada 370 DB Audio";
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Headphone", "Out Jack",
-			"Line", "In Jack";
-		simple-audio-card,routing =
-			"Out Jack", "HPL",
-			"Out Jack", "HPR",
-			"AIN1L", "In Jack",
-			"AIN1L", "In Jack";
-		status = "okay";
-
-		simple-audio-card,dai-link@0 {
-			format = "i2s";
-			cpu {
-				sound-dai = <&audio_controller 0>;
-			};
-
-			codec {
-				sound-dai = <&audio_codec>;
-			};
-		};
-
-		simple-audio-card,dai-link@1 {
-			format = "i2s";
-			cpu {
-				sound-dai = <&audio_controller 1>;
-			};
-
-			codec {
-				sound-dai = <&spdif_out>;
-			};
-		};
-
-		simple-audio-card,dai-link@2 {
-			format = "i2s";
-			cpu {
-				sound-dai = <&audio_controller 1>;
-			};
-
-			codec {
-				sound-dai = <&spdif_in>;
-			};
-		};
-	};
-
-	spdif_out: spdif-out {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dit";
-	};
-
-	spdif_in: spdif-in {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dir";
-	};
-};
-
-&pciec {
-	status = "okay";
-	/*
-	 * The two PCIe units are accessible through
-	 * both standard PCIe slots and mini-PCIe
-	 * slots on the board.
-	 */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	pcie@2,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-
-&spi0 {
-	pinctrl-0 = <&spi0_pins2>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "mx25l25635e", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x800000>;
-			};
-			partition@800000 {
-				label = "Linux";
-				reg = <0x800000 0x800000>;
-			};
-			partition@1000000 {
-				label = "Filesystem";
-				reg = <0x1000000 0x3f000000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
deleted file mode 100644
index 561195b749ebe..0000000000000
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ /dev/null
@@ -1,330 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for D-Link DNS-327L
- *
- * Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org>
- */
-
-/* Remaining unsolved:
- * There's still some unknown device on i2c address 0x13
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "D-Link DNS-327L";
-	compatible = "dlink,dns327l",
-		"marvell,armada370",
-		"marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MiB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <
-			&backup_button_pin
-			&power_button_pin
-			&reset_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		};
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <
-			&sata_l_amber_pin
-			&sata_r_amber_pin
-			&backup_led_pin
-			/* Ensure these are managed by hardware */
-			&sata_l_white_pin
-			&sata_r_white_pin>;
-
-		pinctrl-names = "default";
-
-		led-sata-r-amber {
-			label = "dns327l:amber:sata-r";
-			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		led-sata-l-amber {
-			label = "dns327l:amber:sata-l";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		led-backup {
-			label = "dns327l:white:usb";
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-0 = <&xhci_pwr_pin>;
-			pinctrl-names = "default";
-			regulator-name = "USB3.0 Port Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-boot-on;
-			regulator-always-on;
-			gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata_r_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-0 = <&sata_r_pwr_pin>;
-			pinctrl-names = "default";
-			regulator-name = "SATA-R Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata_l_power: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-0 = <&sata_l_pwr_pin>;
-			pinctrl-names = "default";
-			regulator-name = "SATA-L Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	pcie@2,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&pinctrl {
-	sata_l_white_pin: sata-l-white-pin {
-		marvell,pins = "mpp57";
-		marvell,function = "sata0";
-	};
-
-	sata_r_white_pin: sata-r-white-pin {
-		marvell,pins = "mpp55";
-		marvell,function = "sata1";
-	};
-
-	sata_r_amber_pin: sata-r-amber-pin {
-		marvell,pins = "mpp52";
-		marvell,function = "gpio";
-	};
-
-	sata_l_amber_pin: sata-l-amber-pin {
-		marvell,pins = "mpp53";
-		marvell,function = "gpio";
-	};
-
-	backup_led_pin: backup-led-pin {
-		marvell,pins = "mpp61";
-		marvell,function = "gpo";
-	};
-
-	xhci_pwr_pin: xhci-pwr-pin {
-		marvell,pins = "mpp13";
-		marvell,function = "gpio";
-	};
-
-	sata_r_pwr_pin: sata-r-pwr-pin {
-		marvell,pins = "mpp54";
-		marvell,function = "gpio";
-	};
-
-	sata_l_pwr_pin: sata-l-pwr-pin {
-		marvell,pins = "mpp56";
-		marvell,function = "gpio";
-	};
-
-	uart1_pins: uart1-pins {
-		marvell,pins = "mpp60", "mpp61";
-		marvell,function = "uart1";
-	};
-
-	power_button_pin: power-button-pin {
-		marvell,pins = "mpp65";
-		marvell,function = "gpio";
-	};
-
-	backup_button_pin: backup-button-pin {
-		marvell,pins = "mpp63";
-		marvell,function = "gpio";
-	};
-
-	reset_button_pin: reset-button-pin {
-		marvell,pins = "mpp64";
-		marvell,function = "gpio";
-	};
-};
-
-/* Serial console */
-&uart0 {
-	status = "okay";
-};
-
-/* Connected to Weltrend MCU */
-&uart1 {
-	pinctrl-0 = <&uart1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&mdio {
-	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-		marvell,reg-init = <0x2 0x19 0x0 0x0077>,
-				   <0x2 0x18 0x0 0x5747>;
-	};
-};
-
-&eth1 {
-	phy = <&phy0>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
-
-&i2c0 {
-	compatible = "marvell,mv64xxx-i2c";
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				/* 1.0 MiB */
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "u-boot-env";
-				/* 128 KiB */
-				reg = <0x100000 0x20000>;
-				read-only;
-			};
-
-			partition@120000 {
-				label = "uImage";
-				/* 7 MiB */
-				reg = <0x120000 0x700000>;
-			};
-
-			partition@820000 {
-				label = "ubifs";
-				/* ~ 84 MiB */
-				reg = <0x820000 0x54e0000>;
-			};
-
-			/* Hardcoded into stock bootloader */
-			partition@5d00000 {
-				label = "failsafe-uImage";
-				/* 5 MiB */
-				reg = <0x5d00000 0x500000>;
-			};
-
-			partition@6200000 {
-				label = "failsafe-fs";
-				/* 29 MiB */
-				reg = <0x6200000 0x1d00000>;
-			};
-
-			partition@7f00000 {
-				label = "bbt";
-				/* 1 MiB for BBT */
-				reg = <0x7f00000 0x100000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
deleted file mode 100644
index 7c2f5a79b50da..0000000000000
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Globalscale Mirabox
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "Globalscale Mirabox";
-	compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			timer@20300 {
-				clock-frequency = <600000000>;
-				status = "okay";
-			};
-
-			gpio_leds {
-				compatible = "gpio-leds";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
-
-				green_pwr_led {
-					label = "mirabox:green:pwr";
-					gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-					default-state = "keep";
-				};
-
-				blue_stat_led {
-					label = "mirabox:blue:stat";
-					gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				green_stat_led {
-					label = "mirabox:green:stat";
-					gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			crypto@90000 {
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins3>;
-				pinctrl-names = "default";
-				status = "okay";
-				/*
-				 * No CD or WP GPIOs: SDIO interface used for
-				 * Wifi/Bluetooth chip
-				 */
-				 broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pca9505: pca9505@25 {
-					compatible = "nxp,pca9505";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x25>;
-				};
-			};
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* Internal mini-PCIe connector */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* Connected on the PCB to a USB 3.0 XHCI controller */
-	pcie@2,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&pinctrl {
-	pwr_led_pin: pwr-led-pin {
-		marvell,pins = "mpp63";
-		marvell,function = "gpio";
-	};
-
-	stat_led_pins: stat-led-pins {
-		marvell,pins = "mpp64", "mpp65";
-		marvell,function = "gpio";
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x400000>;
-			};
-			partition@400000 {
-				label = "Linux";
-				reg = <0x400000 0x400000>;
-			};
-			partition@800000 {
-				label = "Filesystem";
-				reg = <0x800000 0x3f800000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
deleted file mode 100644
index 079b37cf148a1..0000000000000
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ /dev/null
@@ -1,276 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for NETGEAR ReadyNAS 102
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 102";
-	compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-
-			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
-			rtc@10300 {
-				status = "disabled";
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			/* eSATA interface */
-			sata@a0000 {
-				nr-ports = <1>;
-				status = "okay";
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				clock-frequency = <100000>;
-
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-
-				status = "okay";
-
-				isl12057: rtc@68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-					wakeup-source;
-				};
-
-				g762: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-			};
-		};
-	};
-
-	clocks {
-		g762_clk: g762-oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <8192>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&power_led_pin
-			     &sata1_led_pin
-			     &sata2_led_pin
-			     &backup_led_pin>;
-		pinctrl-names = "default";
-
-		blue-power-led {
-			label = "rn102:blue:pwr";
-			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		blue-sata1-led {
-			label = "rn102:blue:sata1";
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		blue-sata2-led {
-			label = "rn102:blue:sata2";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		blue-backup-led {
-			label = "rn102:blue:backup";
-			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin
-			     &reset_button_pin
-			     &backup_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-		};
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* Connected to Marvell 88SE9170 SATA controller */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* Connected to FL1009 USB 3.0 controller */
-	pcie@2,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-	};
-};
-
-&pinctrl {
-	power_led_pin: power-led-pin {
-		marvell,pins = "mpp57";
-		marvell,function = "gpio";
-	};
-
-	sata1_led_pin: sata1-led-pin {
-		marvell,pins = "mpp15";
-		marvell,function = "gpio";
-	};
-
-	sata2_led_pin: sata2-led-pin {
-		marvell,pins = "mpp14";
-		marvell,function = "gpio";
-	};
-
-	backup_led_pin: backup-led-pin {
-		marvell,pins = "mpp56";
-		marvell,function = "gpio";
-	};
-
-	backup_button_pin: backup-button-pin {
-		marvell,pins = "mpp58";
-		marvell,function = "gpio";
-	};
-
-	power_button_pin: power-button-pin {
-		marvell,pins = "mpp62";
-		marvell,function = "gpio";
-	};
-
-	reset_button_pin: reset-button-pin {
-		marvell,pins = "mpp6";
-		marvell,function = "gpio";
-	};
-
-	poweroff: poweroff {
-		marvell,pins = "mpp8";
-		marvell,function = "gpio";
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-
-		/* Use Hardware BCH ECC */
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x180000>;  /* 1.5MB */
-				read-only;
-			};
-
-			partition@180000 {
-				label = "u-boot-env";
-				reg = <0x180000 0x20000>;    /* 128KB */
-				read-only;
-			};
-
-			partition@200000 {
-				label = "uImage";
-				reg = <0x0200000 0x600000>;    /* 6MB */
-			};
-
-			partition@800000 {
-				label = "minirootfs";
-				reg = <0x0800000 0x400000>;    /* 4MB */
-			};
-
-			/* Last MB is for the BBT, i.e. not writable */
-			partition@c00000 {
-				label = "ubifs";
-				reg = <0x0c00000 0x7400000>; /* 116MB */
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
deleted file mode 100644
index d752ac1d7b58a..0000000000000
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ /dev/null
@@ -1,302 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for NETGEAR ReadyNAS 104
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 104";
-	compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-
-			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
-			rtc@10300 {
-				status = "disabled";
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				clock-frequency = <100000>;
-
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-
-				status = "okay";
-
-				isl12057: rtc@68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-					wakeup-source;
-				};
-
-				g762: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				pca9554: pca9554@23 {
-					compatible = "nxp,pca9554";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x23>;
-				};
-			};
-		};
-	};
-
-	clocks {
-		g762_clk: g762-oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <8192>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&backup_led_pin &power_led_pin>;
-		pinctrl-names = "default";
-
-		blue-backup-led {
-			label = "rn104:blue:backup";
-			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue-power-led {
-			label = "rn104:blue:pwr";
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "keep";
-		};
-
-		blue-sata1-led {
-			label = "rn104:blue:sata1";
-			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata2-led {
-			label = "rn104:blue:sata2";
-			gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata3-led {
-			label = "rn104:blue:sata3";
-			gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata4-led {
-			label = "rn104:blue:sata4";
-			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	auxdisplay {
-		compatible = "hit,hd44780";
-		data-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>,
-				<&gpio1 26 GPIO_ACTIVE_HIGH>,
-				<&gpio1 27 GPIO_ACTIVE_HIGH>,
-				<&gpio1 29 GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-		rs-gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		rw-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-		backlight-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-		display-height-chars = <2>;
-		display-width-chars = <16>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&backup_button_pin
-			     &power_button_pin
-			     &reset_button_pin>;
-		pinctrl-names = "default";
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-		};
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* Connected to FL1009 USB 3.0 controller */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* Connected to Marvell 88SE9215 SATA controller */
-	pcie@2,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-		reg = <1>;
-	};
-};
-
-&pinctrl {
-	poweroff: poweroff {
-		marvell,pins = "mpp60";
-		marvell,function = "gpio";
-	};
-
-	backup_button_pin: backup-button-pin {
-		marvell,pins = "mpp52";
-		marvell,function = "gpio";
-	};
-
-	power_button_pin: power-button-pin {
-		marvell,pins = "mpp62";
-		marvell,function = "gpio";
-	};
-
-	backup_led_pin: backup-led-pin {
-		marvell,pins = "mpp63";
-		marvell,function = "gpio";
-	};
-
-	power_led_pin: power-led-pin {
-		marvell,pins = "mpp64";
-		marvell,function = "gpio";
-	};
-
-	reset_button_pin: reset-button-pin {
-		marvell,pins = "mpp65";
-		marvell,function = "gpio";
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-
-		/* Use Hardware BCH ECC */
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x180000>;  /* 1.5MB */
-				read-only;
-			};
-
-			partition@180000 {
-				label = "u-boot-env";
-				reg = <0x180000 0x20000>;    /* 128KB */
-				read-only;
-			};
-
-			partition@200000 {
-				label = "uImage";
-				reg = <0x0200000 0x600000>;    /* 6MB */
-			};
-
-			partition@800000 {
-				label = "minirootfs";
-				reg = <0x0800000 0x400000>;    /* 4MB */
-			};
-
-			/* Last MB is for the BBT, i.e. not writable */
-			partition@c00000 {
-				label = "ubifs";
-				reg = <0x0c00000 0x7400000>; /* 116MB */
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
deleted file mode 100644
index b459a670f6158..0000000000000
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada 370 Reference Design board
- * (RD-88F6710-A1)
- *
- *  Copied from arch/arm/boot/dts/armada-370-db.dts
- *
- *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "Marvell Armada 370 Reference Design";
-	compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "sgmii";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy-mode = "rgmii-id";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins1>;
-				pinctrl-names = "default";
-				status = "okay";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			gpio-keys {
-				compatible = "gpio-keys";
-				button {
-					label = "Software Button";
-					linux,code = <KEY_POWER>;
-					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-				};
-			};
-
-			gpio-fan {
-				compatible = "gpio-fan";
-				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-				gpio-fan,speed-map = <0 0 3000 1>;
-				pinctrl-0 = <&fan_pins>;
-				pinctrl-names = "default";
-			};
-
-			gpio_leds {
-				compatible = "gpio-leds";
-				pinctrl-names = "default";
-				pinctrl-0 = <&led_pins>;
-
-				sw_led {
-					label = "370rd:green:sw";
-					gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-					default-state = "keep";
-				};
-			};
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* Internal mini-PCIe connector */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* Internal mini-PCIe connector */
-	pcie@2,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		leds {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_WHITE>;
-				function = LED_FUNCTION_WAN;
-				default-state = "keep";
-			};
-		};
-	};
-
-	switch: switch@10 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan0";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan1";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan3";
-			};
-
-			port@5 {
-				reg = <5>;
-				ethernet = <&eth1>;
-				phy-mode = "rgmii-id";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switchphy0: switchphy@0 {
-				reg = <0>;
-				interrupt-parent = <&switch>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			switchphy1: switchphy@1 {
-				reg = <1>;
-				interrupt-parent = <&switch>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			switchphy2: switchphy@2 {
-				reg = <2>;
-				interrupt-parent = <&switch>;
-				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			switchphy3: switchphy@3 {
-				reg = <3>;
-				interrupt-parent = <&switch>;
-				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-	};
-};
-
-
-&pinctrl {
-	fan_pins: fan-pins {
-		marvell,pins = "mpp8";
-		marvell,function = "gpio";
-	};
-
-	led_pins: led-pins {
-		marvell,pins = "mpp32";
-		marvell,function = "gpio";
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x800000>;
-			};
-			partition@800000 {
-				label = "Linux";
-				reg = <0x800000 0x800000>;
-			};
-			partition@1000000 {
-				label = "Filesystem";
-				reg = <0x1000000 0x3f000000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
deleted file mode 100644
index 8dd242e668e65..0000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Vincent Donnefort <vdonnefort@gmail.com>
- */
-
-/*
- * Here are some information allowing to identify the device:
- *
- * Product name                 : Seagate NAS 2-Bay
- * Code name (board/PCB)        : Dart 2-Bay
- * Model name (case sticker)    : SRPD20
- * Material desc (product spec) : STCTxxxxxxx
- */
-
-/dts-v1/;
-#include "armada-370-seagate-nas-xbay.dtsi"
-
-/ {
-	model = "Seagate NAS 2-Bay (Dart, SRPD20)";
-	compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp";
-
-	gpio-fan {
-		gpio-fan,speed-map =
-			<   0 3
-			  950 2
-			 1400 1
-			 1800 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
deleted file mode 100644
index 9cb69999b1dbc..0000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Vincent Donnefort <vdonnefort@gmail.com>
- */
-
-/*
- * Here are some information allowing to identify the device:
- *
- * Product name                 : Seagate NAS 4-Bay
- * Code name (board/PCB)        : Dart 4-Bay
- * Model name (case sticker)    : SRPD40
- * Material desc (product spec) : STCUxxxxxxx
- */
-
-/dts-v1/;
-#include "armada-370-seagate-nas-xbay.dtsi"
-#include <dt-bindings/leds/leds-ns2.h>
-
-/ {
-	model = "Seagate NAS 4-Bay (Dart, SRPD40)";
-	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
-
-	soc {
-		internal-regs {
-			ethernet@74000 {
-				status = "okay";
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			i2c@11000 {
-				/* I2C GPIO expander (PCA9554A) */
-				pca9554: pca9554@21 {
-					compatible = "nxp,pca9554";
-					reg = <0x21>;
-					#gpio-cells = <2>;
-					gpio-controller;
-				};
-			};
-		};
-	};
-
-	regulators {
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "SATA2 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
-		};
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "SATA3 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		led-red-sata2 {
-			label = "dart:red:sata2";
-			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
-		};
-		led-red-sata3 {
-			label = "dart:red:sata3";
-			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds-ns2 {
-		compatible = "lacie,ns2-leds";
-
-		white-sata2 {
-			label = "dart:white:sata2";
-			cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
-			slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
-			num-modes = <4>;
-			modes-map = <NS_V2_LED_SATA 0 0
-				     NS_V2_LED_OFF  0 1
-				     NS_V2_LED_ON   1 0
-				     NS_V2_LED_ON   1 1>;
-		};
-		white-sata3 {
-			label = "dart:white:sata3";
-			cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
-			slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
-			num-modes = <4>;
-			modes-map = <NS_V2_LED_SATA 0 0
-				     NS_V2_LED_OFF  0 1
-				     NS_V2_LED_ON   1 0
-				     NS_V2_LED_ON   1 1>;
-		};
-	};
-
-	gpio-fan {
-		gpio-fan,speed-map =
-			<   0 3
-			  800 2
-			  1050 1
-			  1300 0>;
-	};
-};
-
-&pciec {
-	/* SATA AHCI controller 88SE9170 */
-	pcie@1,0 {
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
deleted file mode 100644
index 822f10734946d..0000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Vincent Donnefort <vdonnefort@gmail.com>
- */
-
-/*
- * TODO: add support for the white SATA LEDs associated with HDD 0 and 1.
- */
-
-#include "armada-370.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			i2c@11000 {
-				status = "okay";
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				clock-frequency = <100000>;
-
-				/* RTC - NXP 8563T (second source) */
-				rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-					interrupts = <110>;
-				};
-				/* RTC - MCP7940NT */
-				rtc@6f {
-					compatible = "microchip,mcp7941x";
-					reg = <0x6f>;
-					interrupts = <110>;
-				};
-			};
-		};
-
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		};
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio2 0 GPIO_ACTIVE_HIGH
-			 &gpio2 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-power {
-			label = "Power button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-		button-backup {
-			label = "Backup button";
-			linux,code = <KEY_OPTION>;
-			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-		button-reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led-white-power {
-			label = "dart:white:power";
-			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-
-		};
-		led-red-power {
-			label = "dart:red:power";
-			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-		};
-		led-red-sata0 {
-			label = "dart:red:sata0";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		led-red-sata1 {
-			label = "dart:red:sata1";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* USB 3.0 bridge ASM1042A */
-	pcie@2,0 {
-		status = "okay";
-	};
-};
-
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
-	pinctrl-names = "default";
-
-	hdd0_led_sata_pin: hdd0-led-sata-pin {
-		marvell,pins = "mpp48";
-		marvell,function = "sata1";
-	};
-	hdd0_led_gpio_pin: hdd0-led-gpio-pin {
-		marvell,pins = "mpp48";
-		marvell,function = "gpio";
-	};
-	hdd1_led_sata_pin: hdd1-led-sata-pin {
-		marvell,pins = "mpp57";
-		marvell,function = "sata0";
-	};
-	hdd1_led_gpio_pin: hdd1-led-gpio-pin {
-		marvell,pins = "mpp57";
-		marvell,function = "gpio";
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x300000>;
-			};
-			partition@300000 {
-				label = "device-tree";
-				reg = <0x300000 0x20000>;
-			};
-			partition@320000 {
-				label = "linux";
-				reg = <0x320000 0x2000000>;
-			};
-			partition@2320000 {
-				label = "rootfs";
-				reg = <0x2320000 0xdce0000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
deleted file mode 100644
index 5ee572dc92423..0000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Simon Guinot <simon.guinot@sequanux.org>
- */
-
-/*
- * Here are some information allowing to identify the device:
- *
- * Product name                 : Seagate Personal Cloud 2-Bay
- * Code name (board/PCB)        : Cumulus Max
- * Model name (case sticker)    : SRN22C
- * Material desc (product spec) : STCSxxxxxxx
- */
-
-/dts-v1/;
-#include "armada-370-seagate-personal-cloud.dtsi"
-
-/ {
-	model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
-	compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
-
-	soc {
-		internal-regs {
-			sata@a0000 {
-				status = "okay";
-				nr-ports = <2>;
-			};
-		};
-	};
-
-	regulators {
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
deleted file mode 100644
index 578b54b39c8f0..0000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Simon Guinot <simon.guinot@sequanux.org>
- */
-
-/*
- * Here are some information allowing to identify the device:
- *
- * Product name                 : Seagate Personal Cloud
- * Code name (board/PCB)        : Cumulus
- * Model name (case sticker)    : SRN21C
- * Material desc (product spec) : STCRxxxxxxx
- */
-
-/dts-v1/;
-#include "armada-370-seagate-personal-cloud.dtsi"
-
-/ {
-	model = "Seagate Personal Cloud (Cumulus, SRN21C)";
-	compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp";
-
-	soc {
-		internal-regs {
-			sata@a0000 {
-				status = "okay";
-				nr-ports = <1>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
deleted file mode 100644
index 124a8ba279e37..0000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ /dev/null
@@ -1,173 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
- * (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Simon Guinot <simon.guinot@sequanux.org>
- */
-
-/*
- * TODO: add support for the white SATA LED.
- */
-
-#include "armada-370.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			coherency-fabric@20200 {
-				broken-idle;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
-		};
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-power {
-			label = "Power button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-			debounce-interval = <100>;
-		};
-		button-reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-		button-usb {
-			label = "USB VBUS error";
-			linux,code = <KEY_UNKNOWN>;
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led-red-sata0 {
-			label = "cumulus:red:sata0";
-			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* USB 3.0 Bridge ASM1042A */
-	pcie@1,0 {
-		status = "okay";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&sata_led_pin>;
-	pinctrl-names = "default";
-
-	sata_led_pin: sata-led-pin {
-		marvell,pins = "mpp60";
-		marvell,function = "sata0";
-	};
-	gpio_led_pin: gpio-led-pin {
-		marvell,pins = "mpp60";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-0 = <&spi0_pins2>;
-	pinctrl-names = "default";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		/* MX25L8006E */
-		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <50000000>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x100000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
deleted file mode 100644
index f0893cc066071..0000000000000
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ /dev/null
@@ -1,312 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Synology DS213j
- *
- * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the old 0xd0000000).
- * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
- * bootloaders provided by Marvell. It is used in recent versions of
- * DSM software provided by Synology. Nonetheless, some earlier boards
- * were delivered with an older version of u-boot that left internal
- * registers mapped at 0xd0000000. If you have such a device you will
- * not be able to directly boot a kernel based on this Device Tree. In
- * that case, the preferred solution is to update your bootloader (e.g.
- * by upgrading to latest version of DSM, or building a new one and
- * installing it from u-boot prompt) or adjust the Devive Tree
- * (s/0xf1000000/0xd0000000/ in 'ranges' below).
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "Synology DS213j";
-	compatible = "synology,ds213j", "marvell,armada370",
-		     "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-
-			/* RTC provided by Seiko S-35390A I2C RTC chip below */
-			rtc@10300 {
-				status = "disabled";
-			};
-
-			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				clock-frequency = <400000>;
-				status = "okay";
-
-				/* Main device RTC chip */
-				s35390a: s35390a@30 {
-					 compatible = "sii,s35390a";
-					 reg = <0x30>;
-				};
-			};
-
-			/* Connected to a header on device's PCB */
-			serial@12000 {
-				status = "okay";
-			};
-
-			/* Connected to a TI MSP430F2111 for power control */
-			serial@12100 {
-				status = "okay";
-			};
-
-			poweroff@12100 {
-				compatible = "synology,power-off";
-				reg = <0x12100 0x100>;
-				clocks = <&coreclk 0>;
-			};
-
-			/* rear USB port, near reset button */
-			usb@50000 {
-				status = "okay";
-			};
-
-			/* rear USB port, near RJ45 port */
-			usb@51000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "sgmii";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-		};
-	};
-
-	gpio-fan-32-38 {
-		status = "okay";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
-			     &fan_ctrl_high_pin &fan_alarm_pin>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
-			 &gpio2  0 GPIO_ACTIVE_HIGH
-			 &gpio2  1 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       1000 1
-				       1150 2
-				       1350 4
-				       1500 3
-				       1650 5
-				       1750 6
-				       1900 7 >;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&disk1_led_pin
-			     &disk2_led_pin>;
-		pinctrl-names = "default";
-
-		disk1-led-amber {
-			label = "synology:amber:disk1";
-			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		disk2-led-amber {
-			label = "synology:amber:disk2";
-			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
-		pinctrl-names = "default";
-
-		sata1_regulator: sata1-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata2_regulator: sata2-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA2 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
-		reg = <1>;
-	};
-};
-
-&pinctrl {
-	disk1_led_pin: disk1-led-pin {
-		marvell,pins = "mpp31";
-		marvell,function = "gpio";
-	};
-
-	disk2_led_pin: disk2-led-pin {
-		marvell,pins = "mpp32";
-		marvell,function = "gpio";
-	};
-
-	sata1_pwr_pin: sata1-pwr-pin {
-		marvell,pins = "mpp37";
-		marvell,function = "gpio";
-	};
-
-	sata2_pwr_pin: sata2-pwr-pin {
-		marvell,pins = "mpp62";
-		marvell,function = "gpio";
-	};
-
-	sata1_pres_pin: sata1-pres-pin {
-		marvell,pins = "mpp60";
-		marvell,function = "gpio";
-	};
-
-	sata2_pres_pin: sata2-pres-pin {
-		marvell,pins = "mpp48";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit0_pin: syno-id-bit0-pin {
-		marvell,pins = "mpp55";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit1_pin: syno-id-bit1-pin {
-		marvell,pins = "mpp56";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit2_pin: syno-id-bit2-pin {
-		marvell,pins = "mpp57";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit3_pin: syno-id-bit3-pin {
-		marvell,pins = "mpp58";
-		marvell,function = "gpio";
-	};
-
-	fan_ctrl_low_pin: fan-ctrl-low-pin {
-		marvell,pins = "mpp65";
-		marvell,function = "gpio";
-	};
-
-	fan_ctrl_mid_pin: fan-ctrl-mid-pin {
-		marvell,pins = "mpp64";
-		marvell,function = "gpio";
-	};
-
-	fan_ctrl_high_pin: fan-ctrl-high-pin {
-		marvell,pins = "mpp63";
-		marvell,function = "gpio";
-	};
-
-	fan_alarm_pin: fan-alarm-pin {
-		marvell,pins = "mpp38";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q064", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <20000000>;
-
-		/*
-		 * Warning!
-		 *
-		 * Synology u-boot uses its compiled-in environment
-		 * and it seems Synology did not care to change u-boot
-		 * default configuration in order to allow saving a
-		 * modified environment at a sensible location. So,
-		 * if you do a 'saveenv' under u-boot, your modified
-		 * environment will be saved at 1MB after the start
-		 * of the flash, i.e. in the middle of the uImage.
-		 * For that reason, it is strongly advised not to
-		 * change the default environment, unless you know
-		 * what you are doing.
-		 */
-		partition@0 { /* u-boot */
-			label = "RedBoot";
-			reg = <0x00000000 0x000c0000>; /* 768KB */
-		};
-
-		partition@c0000 { /* uImage */
-			label = "zImage";
-			reg = <0x000c0000 0x002d0000>; /* 2880KB */
-		};
-
-		partition@390000 { /* uInitramfs */
-			label = "rd.gz";
-			reg = <0x00390000 0x00440000>; /* 4250KB */
-		};
-
-		partition@7d0000 { /* MAC address and serial number */
-			label = "vendor";
-			reg = <0x007d0000 0x00010000>; /* 64KB */
-		};
-
-		partition@7e0000 {
-			label = "RedBoot config";
-			reg = <0x007e0000 0x00010000>; /* 64KB */
-		};
-
-		partition@7f0000 {
-			label = "FIS directory";
-			reg = <0x007f0000 0x00010000>; /* 64KB */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
deleted file mode 100644
index 0b8c2a64b36f9..0000000000000
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ /dev/null
@@ -1,313 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 370 and Armada XP SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Ben Dooks <ben.dooks@codethink.co.uk>
- *
- * This file contains the definitions that are common to the Armada
- * 370 and Armada XP SoC.
- */
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	model = "Marvell Armada 370 and XP SoC";
-	compatible = "marvell,armada-370-xp";
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "marvell,sheeva-v7";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts-extended = <&mpic 3>;
-	};
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		interrupt-parent = <&mpic>;
-		pcie-mem-aperture = <0xf8000000 0x7e00000>;
-		pcie-io-aperture  = <0xffe00000 0x100000>;
-
-		devbus_bootcs: devbus-bootcs {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs0: devbus-cs0 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs1: devbus-cs1 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs2: devbus-cs2 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs3: devbus-cs3 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			rtc: rtc@10300 {
-				compatible = "marvell,orion-rtc";
-				reg = <0x10300 0x20>;
-				interrupts = <50>;
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <31>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <32>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			uart0: serial@12000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <41>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			uart1: serial@12100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <42>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			pinctrl: pin-ctrl@18000 {
-				reg = <0x18000 0x38>;
-			};
-
-			coredivclk: corediv-clock@18740 {
-				compatible = "marvell,armada-370-corediv-clock";
-				reg = <0x18740 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>,
-				      <0x20250 0x8>;
-			};
-
-			mpic: interrupt-controller@20a00 {
-				compatible = "marvell,mpic";
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-			};
-
-			coherencyfab: coherency-fabric@20200 {
-				compatible = "marvell,coherency-fabric";
-				reg = <0x20200 0xb0>, <0x21010 0x1c>;
-			};
-
-			timer: timer@20300 {
-				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
-			};
-
-			watchdog: watchdog@20300 {
-				reg = <0x20300 0x34>, <0x20704 0x4>;
-			};
-
-			cpurst: cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x8>;
-			};
-
-			pmsu: pmsu@22000 {
-				compatible = "marvell,armada-370-pmsu";
-				reg = <0x22000 0x1000>;
-			};
-
-			usb0: usb@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x500>;
-				interrupts = <45>;
-				status = "disabled";
-			};
-
-			usb1: usb@51000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x51000 0x500>;
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			eth0: ethernet@70000 {
-				reg = <0x70000 0x4000>;
-				interrupts = <8>;
-				clocks = <&gateclk 4>;
-				status = "disabled";
-			};
-
-			mdio: mdio@72004 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0x72004 0x4>;
-				clocks = <&gateclk 4>;
-			};
-
-			eth1: ethernet@74000 {
-				reg = <0x74000 0x4000>;
-				interrupts = <10>;
-				clocks = <&gateclk 3>;
-				status = "disabled";
-			};
-
-			sata: sata@a0000 {
-				compatible = "marvell,armada-370-sata";
-				reg = <0xa0000 0x5000>;
-				interrupts = <55>;
-				clocks = <&gateclk 15>, <&gateclk 30>;
-				clock-names = "0", "1";
-				status = "disabled";
-			};
-
-			nand_controller: nand-controller@d0000 {
-				compatible = "marvell,armada370-nand-controller";
-				reg = <0xd0000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <113>;
-				clocks = <&coredivclk 0>;
-				status = "disabled";
-			};
-
-			sdio: mvsdio@d4000 {
-				compatible = "marvell,orion-sdio";
-				reg = <0xd4000 0x200>;
-				interrupts = <54>;
-				clocks = <&gateclk 17>;
-				bus-width = <4>;
-				cap-sdio-irq;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				status = "disabled";
-			};
-		};
-
-		spi0: spi@10600 {
-			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
-			      <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
-			      <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
-			      <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
-			      <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
-			      <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
-			      <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
-			      <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
-			      <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			interrupts = <30>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		spi1: spi@10680 {
-			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */
-			      <MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */
-			      <MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */
-			      <MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */
-			      <MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */
-			      <MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */
-			      <MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */
-			      <MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */
-			      <MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			interrupts = <92>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-	};
-
-	clocks {
-		/* 2 GHz fixed main PLL */
-		mainpll: mainpll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
-		};
-	};
- };
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
deleted file mode 100644
index 2013a5ccecd31..0000000000000
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ /dev/null
@@ -1,439 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 370 family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Contains definitions specific to the Armada 370 SoC that are not
- * common to all Armada SoCs.
- */
-
-#include "armada-370-xp.dtsi"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	model = "Marvell Armada 370 family SoC";
-	compatible = "marvell,armada370", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	soc {
-		compatible = "marvell,armada370-mbus", "simple-bus";
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
-		};
-
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 58>;
-				#interrupt-cells = <1>;
-                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
-						<0 0 0 2 &pcie0_intc 1>,
-						<0 0 0 3 &pcie0_intc 2>,
-						<0 0 0 4 &pcie0_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-
-				pcie0_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 62>;
-				#interrupt-cells = <1>;
-                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
-						<0 0 0 2 &pcie2_intc 1>,
-						<0 0 0 3 &pcie2_intc 2>,
-						<0 0 0 4 &pcie2_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-
-				pcie2_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		internal-regs {
-			L2: l2-cache@8000 {
-				compatible = "marvell,aurora-outer-cache";
-				reg = <0x08000 0x1000>;
-				cache-id-part = <0x100>;
-				cache-level = <2>;
-				cache-unified;
-				wt-override;
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-
-			systemc: system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-370-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			coreclk: mvebu-sar@18230 {
-				compatible = "marvell,armada-370-core-clock";
-				reg = <0x18230 0x08>;
-				#clock-cells = <1>;
-			};
-
-			thermal: thermal@18300 {
-				compatible = "marvell,armada370-thermal";
-				reg = <0x18300 0x4
-					0x18304 0x4>;
-				status = "okay";
-			};
-
-			sscg: sscg@18330 {
-				reg = <0x18330 0x4>;
-			};
-
-			cpuconf: cpu-config@21000 {
-				compatible = "marvell,armada-370-cpu-config";
-				reg = <0x21000 0x8>;
-			};
-
-			audio_controller: audio-controller@30000 {
-				#sound-dai-cells = <1>;
-				compatible = "marvell,armada370-audio";
-				reg = <0x30000 0x4000>;
-				interrupts = <93>;
-				clocks = <&gateclk 0>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			xor0: xor@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60A00 0x100>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <51>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <52>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor1: xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <94>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <95>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			cesa: crypto@90000 {
-				compatible = "marvell,armada-370-crypto";
-				reg = <0x90000 0x10000>;
-				reg-names = "regs";
-				interrupts = <48>;
-				clocks = <&gateclk 23>;
-				clock-names = "cesa0";
-				marvell,crypto-srams = <&crypto_sram>;
-				marvell,crypto-sram-size = <0x7e0>;
-			};
-		};
-
-		crypto_sram: sa-sram {
-			compatible = "mmio-sram";
-			reg = <MBUS_ID(0x09, 0x01) 0 0x800>;
-			reg-names = "sram";
-			clocks = <&gateclk 23>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>;
-
-			/*
-			 * The Armada 370 has an erratum preventing the use of
-			 * the standard workflow for CPU idle support (relying
-			 * on the BootROM code to enter/exit idle state).
-			 * Reserve some amount of the crypto SRAM to put the
-			 * cpuidle workaround.
-			 */
-			idle-sram@0 {
-				reg = <0x0 0x20>;
-			};
-		};
-	};
-};
-
-/*
- * Default UART pinctrl setting without RTS/CTS, can be overwritten on
- * board level if a different configuration is used.
- */
-
-&uart0 {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-};
-
-&uart1 {
-	pinctrl-0 = <&uart1_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c0 {
-	reg = <0x11000 0x20>;
-};
-
-&i2c1 {
-	reg = <0x11100 0x20>;
-};
-
-&mpic {
-	reg = <0x20a00 0x1d0>, <0x21870 0x58>;
-};
-
-&timer {
-	compatible = "marvell,armada-370-timer";
-	clocks = <&coreclk 2>;
-};
-
-&watchdog {
-	compatible = "marvell,armada-370-wdt";
-	clocks = <&coreclk 2>;
-};
-
-&usb0 {
-	clocks = <&coreclk 0>;
-};
-
-&usb1 {
-	clocks = <&coreclk 0>;
-};
-
-&eth0 {
-	compatible = "marvell,armada-370-neta";
-};
-
-&eth1 {
-	compatible = "marvell,armada-370-neta";
-};
-
-&pinctrl {
-	compatible = "marvell,mv88f6710-pinctrl";
-
-	spi0_pins1: spi0-pins1 {
-		marvell,pins = "mpp33", "mpp34",
-			       "mpp35", "mpp36";
-		marvell,function = "spi0";
-	};
-
-	spi0_pins2: spi0_pins2 {
-		marvell,pins = "mpp32", "mpp63",
-			       "mpp64", "mpp65";
-		marvell,function = "spi0";
-	};
-
-	spi1_pins: spi1-pins {
-		marvell,pins = "mpp49", "mpp50",
-			       "mpp51", "mpp52";
-		marvell,function = "spi1";
-	};
-
-	uart0_pins: uart0-pins {
-		marvell,pins = "mpp0", "mpp1";
-		marvell,function = "uart0";
-	};
-
-	uart1_pins: uart1-pins {
-		marvell,pins = "mpp41", "mpp42";
-		marvell,function = "uart1";
-	};
-
-	sdio_pins1: sdio-pins1 {
-		marvell,pins = "mpp9",  "mpp11", "mpp12",
-				"mpp13", "mpp14", "mpp15";
-		marvell,function = "sd0";
-	};
-
-	sdio_pins2: sdio-pins2 {
-		marvell,pins = "mpp47", "mpp48", "mpp49",
-				"mpp50", "mpp51", "mpp52";
-		marvell,function = "sd0";
-	};
-
-	sdio_pins3: sdio-pins3 {
-		marvell,pins = "mpp48", "mpp49", "mpp50",
-				"mpp51", "mpp52", "mpp53";
-		marvell,function = "sd0";
-	};
-
-	i2c0_pins: i2c0-pins {
-		marvell,pins = "mpp2", "mpp3";
-		marvell,function = "i2c0";
-	};
-
-	i2s_pins1: i2s-pins1 {
-		marvell,pins = "mpp5", "mpp6", "mpp7",
-			       "mpp8", "mpp9", "mpp10",
-			       "mpp12", "mpp13";
-		marvell,function = "audio";
-	};
-
-	i2s_pins2: i2s-pins2 {
-		marvell,pins = "mpp49", "mpp47", "mpp50",
-			       "mpp59", "mpp57", "mpp61",
-			       "mpp62", "mpp60", "mpp58";
-		marvell,function = "audio";
-	};
-
-	mdio_pins: mdio-pins {
-		marvell,pins = "mpp17", "mpp18";
-		marvell,function = "ge";
-	};
-
-	ge0_rgmii_pins: ge0-rgmii-pins {
-		marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
-			       "mpp9", "mpp10", "mpp11", "mpp12",
-			       "mpp13", "mpp14", "mpp15", "mpp16";
-		marvell,function = "ge0";
-	};
-
-	ge1_rgmii_pins: ge1-rgmii-pins {
-		marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
-			       "mpp23", "mpp24", "mpp25", "mpp26",
-			       "mpp27", "mpp28", "mpp29", "mpp30";
-		marvell,function = "ge1";
-	};
-};
-
-/*
- * Default SPI pinctrl setting, can be overwritten on
- * board level if a different configuration is used.
- */
-&spi0 {
-	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
-	pinctrl-0 = <&spi0_pins1>;
-	pinctrl-names = "default";
-};
-
-&spi1 {
-	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
-	pinctrl-0 = <&spi1_pins>;
-	pinctrl-names = "default";
-};
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
deleted file mode 100644
index 4c4092790a200..0000000000000
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada 375 evaluation board
- * (DB-88F6720)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-375.dtsi"
-
-/ {
-	model = "Marvell Armada 375 Development Board";
-	compatible = "marvell,a375-db", "marvell,armada375";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
-
-	};
-};
-&pciec {
-	status = "okay";
-};
-
-/*
- * The two PCIe units are accessible through
- * standard PCIe slots on the board.
- */
-&pcie0 {
-	/* Port 0, Lane 0 */
-	status = "okay";
-};
-
-&pcie1 {
-	/* Port 1, Lane 0 */
-	status = "okay";
-};
-
-
-&spi0 {
-	pinctrl-0 = <&spi0_pins>;
-	pinctrl-names = "default";
-
-	/*
-	 * SPI conflicts with NAND, so we disable it here, and
-	 * select NAND as the enabled device by default.
-	 */
-
-	status = "disabled";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "n25q128a13", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&pinctrl {
-	sdio_st_pins: sdio-st-pins {
-		marvell,pins = "mpp44", "mpp45";
-		marvell,function = "gpio";
-	};
-};
-
-&sata {
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&nand_controller {
-	status = "okay";
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x800000>;
-			};
-			partition@800000 {
-				label = "Linux";
-				reg = <0x800000 0x800000>;
-			};
-			partition@1000000 {
-				label = "Filesystem";
-				reg = <0x1000000 0x3f000000>;
-			};
-		};
-	};
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
-
-&sdio {
-	pinctrl-0 = <&sdio_pins &sdio_st_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-};
-
-&mdio {
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy3: ethernet-phy@3 {
-		reg = <3>;
-	};
-};
-
-&ethernet {
-	status = "okay";
-};
-
-
-&eth0 {
-	status = "okay";
-	phy = <&phy0>;
-	phy-mode = "rgmii-id";
-};
-
-&eth1 {
-	status = "okay";
-	phy = <&phy3>;
-	phy-mode = "gmii";
-};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
deleted file mode 100644
index ddc49547d7867..0000000000000
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ /dev/null
@@ -1,645 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 375 family SoC
- *
- * Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/phy/phy.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	model = "Marvell Armada 375 family SoC";
-	compatible = "marvell,armada375";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	clocks {
-		/* 1 GHz fixed main PLL */
-		mainpll: mainpll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000000>;
-		};
-		/* 25 MHz reference crystal */
-		refclk: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-375-smp";
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts-extended = <&mpic 3>;
-	};
-
-	soc {
-		compatible = "marvell,armada375-mbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		interrupt-parent = <&gic>;
-		pcie-mem-aperture = <0xe0000000 0x8000000>;
-		pcie-io-aperture  = <0xe8000000 0x100000>;
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
-		};
-
-		devbus_bootcs: devbus-bootcs {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs0: devbus-cs0 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs1: devbus-cs1 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs2: devbus-cs2 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs3: devbus-cs3 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			L2: cache-controller@8000 {
-				compatible = "arm,pl310-cache";
-				reg = <0x8000 0x1000>;
-				cache-unified;
-				cache-level = <2>;
-				arm,double-linefill-incr = <0>;
-				arm,double-linefill-wrap = <0>;
-				arm,double-linefill = <0>;
-				prefetch-data = <1>;
-			};
-
-			scu: scu@c000 {
-				compatible = "arm,cortex-a9-scu";
-				reg = <0xc000 0x58>;
-			};
-
-			timer0: timer@c600 {
-				compatible = "arm,cortex-a9-twd-timer";
-				reg = <0xc600 0x20>;
-				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
-				clocks = <&coreclk 2>;
-			};
-
-			gic: interrupt-controller@d000 {
-				compatible = "arm,cortex-a9-gic";
-				#interrupt-cells = <3>;
-				#size-cells = <0>;
-				interrupt-controller;
-				reg = <0xd000 0x1000>,
-				      <0xc100 0x100>;
-			};
-
-			mdio: mdio@c0054 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0xc0054 0x4>;
-				clocks = <&gateclk 19>;
-			};
-
-			/* Network controller */
-			ethernet: ethernet@f0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,armada-375-pp2";
-				reg = <0xf0000 0xa000>, /* Packet Processor regs */
-				      <0xc0000 0x3060>, /* LMS regs */
-				      <0xc4000 0x100>,  /* eth0 regs */
-				      <0xc5000 0x100>;  /* eth1 regs */
-				clocks = <&gateclk 3>, <&gateclk 19>;
-				clock-names = "pp_clk", "gop_clk";
-				status = "disabled";
-
-				eth0: ethernet-port@0 {
-					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-					reg = <0>;
-					port-id = <0>; /* For backward compatibility. */
-					status = "disabled";
-				};
-
-				eth1: ethernet-port@1 {
-					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					reg = <1>;
-					port-id = <1>; /* For backward compatibility. */
-					status = "disabled";
-				};
-			};
-
-			rtc: rtc@10300 {
-				compatible = "marvell,orion-rtc";
-				reg = <0x10300 0x20>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			spi0: spi@10600 {
-				compatible = "marvell,armada-375-spi",
-						"marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-375-spi",
-						"marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			uart0: serial@12000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			uart1: serial@12100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			pinctrl: pinctrl@18000 {
-				compatible = "marvell,mv88f6720-pinctrl";
-				reg = <0x18000 0x24>;
-
-				i2c0_pins: i2c0-pins {
-					marvell,pins = "mpp14",  "mpp15";
-					marvell,function = "i2c0";
-				};
-
-				i2c1_pins: i2c1-pins {
-					marvell,pins = "mpp61",  "mpp62";
-					marvell,function = "i2c1";
-				};
-
-				nand_pins: nand-pins {
-					marvell,pins = "mpp0", "mpp1", "mpp2",
-						"mpp3", "mpp4", "mpp5",
-						"mpp6", "mpp7", "mpp8",
-						"mpp9", "mpp10", "mpp11",
-						"mpp12", "mpp13";
-					marvell,function = "nand";
-				};
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp24",  "mpp25", "mpp26",
-						     "mpp27", "mpp28", "mpp29";
-					marvell,function = "sd";
-				};
-
-				spi0_pins: spi0-pins {
-					marvell,pins = "mpp0",  "mpp1", "mpp4",
-						     "mpp5", "mpp8", "mpp9";
-					marvell,function = "spi0";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			systemc: system-controller@18200 {
-				compatible = "marvell,armada-375-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-375-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			usbcluster: usb-cluster@18400 {
-				compatible = "marvell,armada-375-usb-cluster";
-				reg = <0x18400 0x4>;
-				#phy-cells = <1>;
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
-			};
-
-			mpic: interrupt-controller@20a00 {
-				compatible = "marvell,mpic";
-				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			timer1: timer@20300 {
-				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
-				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-						      <&mpic 5>,
-						      <&mpic 6>;
-				clocks = <&coreclk 0>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			watchdog: watchdog@20300 {
-				compatible = "marvell,armada-375-wdt";
-				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
-				clocks = <&coreclk 0>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			cpurst: cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x10>;
-			};
-
-			coherencyfab: coherency-fabric@21010 {
-				compatible = "marvell,armada-375-coherency-fabric";
-				reg = <0x21010 0x1c>;
-			};
-
-			usb0: usb@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x500>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 18>;
-				phys = <&usbcluster PHY_TYPE_USB2>;
-				phy-names = "usb";
-				status = "disabled";
-			};
-
-			usb1: usb@54000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x54000 0x500>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-
-			usb2: usb@58000 {
-				compatible = "marvell,armada-375-xhci";
-				reg = <0x58000 0x20000>,<0x5b880 0x80>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 16>;
-				phys = <&usbcluster PHY_TYPE_USB3>;
-				phy-names = "usb";
-				status = "disabled";
-			};
-
-			xor0: xor@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60A00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor1: xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gateclk 23>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			cesa: crypto@90000 {
-				compatible = "marvell,armada-375-crypto";
-				reg = <0x90000 0x10000>;
-				reg-names = "regs";
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 30>, <&gateclk 31>,
-					 <&gateclk 28>, <&gateclk 29>;
-				clock-names = "cesa0", "cesa1",
-					      "cesaz0", "cesaz1";
-				marvell,crypto-srams = <&crypto_sram0>,
-						       <&crypto_sram1>;
-				marvell,crypto-sram-size = <0x800>;
-			};
-
-			sata: sata@a0000 {
-				compatible = "marvell,armada-370-sata";
-				reg = <0xa0000 0x5000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 14>, <&gateclk 20>;
-				clock-names = "0", "1";
-				status = "disabled";
-			};
-
-			nand_controller: nand-controller@d0000 {
-				compatible = "marvell,armada370-nand-controller";
-				reg = <0xd0000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			sdio: mvsdio@d4000 {
-				compatible = "marvell,orion-sdio";
-				reg = <0xd4000 0x200>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 17>;
-				bus-width = <4>;
-				cap-sdio-irq;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				status = "disabled";
-			};
-
-			thermal: thermal@e8078 {
-				compatible = "marvell,armada375-thermal";
-				reg = <0xe8078 0x4>, <0xe807c 0x8>;
-				status = "okay";
-			};
-
-			coreclk: mvebu-sar@e8204 {
-				compatible = "marvell,armada-375-core-clock";
-				reg = <0xe8204 0x04>;
-				#clock-cells = <1>;
-			};
-
-			coredivclk: corediv-clock@e8250 {
-				compatible = "marvell,armada-375-corediv-clock";
-				reg = <0xe8250 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-		};
-
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
-						<0 0 0 2 &pcie0_intc 1>,
-						<0 0 0 3 &pcie0_intc 2>,
-						<0 0 0 4 &pcie0_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-
-				pcie0_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie1: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
-						<0 0 0 2 &pcie1_intc 1>,
-						<0 0 0 3 &pcie1_intc 2>,
-						<0 0 0 4 &pcie1_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-		};
-
-		crypto_sram0: sa-sram0 {
-			compatible = "mmio-sram";
-			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
-			clocks = <&gateclk 30>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
-		};
-
-		crypto_sram1: sa-sram1 {
-			compatible = "mmio-sram";
-			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
-			clocks = <&gateclk 31>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
deleted file mode 100644
index e94f22b0e9b5e..0000000000000
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 380 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 380 family SoC";
-	compatible = "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6810-pinctrl";
-			};
-		};
-
-		pcie {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
-
-			/* x1 port */
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
-						<0 0 0 2 &pcie1_intc 1>,
-						<0 0 0 3 &pcie1_intc 2>,
-						<0 0 0 4 &pcie1_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			/* x1 port */
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
-						<0 0 0 2 &pcie2_intc 1>,
-						<0 0 0 3 &pcie2_intc 2>,
-						<0 0 0 4 &pcie2_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-
-				pcie2_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			/* x1 port */
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
-						<0 0 0 2 &pcie3_intc 1>,
-						<0 0 0 3 &pcie3_intc 2>,
-						<0 0 0 4 &pcie3_intc 3>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-
-				pcie3_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
deleted file mode 100644
index f4c4b213ef4ed..0000000000000
--- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
+++ /dev/null
@@ -1,295 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2021, Marcel Ziswiler <marcel@ziswiler.com> */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear GS110EMX";
-	compatible = "netgear,gs110emx", "marvell,armada380";
-
-	aliases {
-		/* So that mvebu u-boot can update the MAC addresses */
-		ethernet1 = &eth0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&front_button_pins>;
-		pinctrl-names = "default";
-
-		key-factory-default {
-			label = "Factory Default";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>; /* 128 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-			rtc@a3800 {
-				/*
-				 * If the rtc doesn't work, run "date reset"
-				 * twice in u-boot.
-				 */
-				status = "okay";
-			};
-		};
-	};
-};
-
-&eth0 {
-	/* ethernet@70000 */
-	bm,pool-long = <0>;
-	bm,pool-short = <1>;
-	buffer-manager = <&bm>;
-	phy-mode = "rgmii-id";
-	pinctrl-0 = <&ge0_rgmii_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	fixed-link {
-		full-duplex;
-		pause;
-		speed = <1000>;
-	};
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-	status = "okay";
-
-	switch@0 {
-		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&switch_interrupt_pins>;
-		pinctrl-names = "default";
-		#size-cells = <0>;
-		reg = <0>;
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switch0phy1: switch0phy1@1 {
-				reg = <0x1>;
-			};
-
-			switch0phy2: switch0phy2@2 {
-				reg = <0x2>;
-			};
-
-			switch0phy3: switch0phy3@3 {
-				reg = <0x3>;
-			};
-
-			switch0phy4: switch0phy4@4 {
-				reg = <0x4>;
-			};
-
-			switch0phy5: switch0phy5@5 {
-				reg = <0x5>;
-			};
-
-			switch0phy6: switch0phy6@6 {
-				reg = <0x6>;
-			};
-
-			switch0phy7: switch0phy7@7 {
-				reg = <0x7>;
-			};
-
-			switch0phy8: switch0phy8@8 {
-				reg = <0x8>;
-			};
-		};
-
-		mdio-external {
-			compatible = "marvell,mv88e6xxx-mdio-external";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy1: ethernet-phy@b {
-				reg = <0xb>;
-				compatible = "ethernet-phy-ieee802.3-c45";
-			};
-
-			phy2: ethernet-phy@c {
-				reg = <0xc>;
-				compatible = "ethernet-phy-ieee802.3-c45";
-			};
-		};
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				ethernet = <&eth0>;
-				phy-mode = "rgmii";
-				reg = <0>;
-
-				fixed-link {
-					full-duplex;
-					pause;
-					speed = <1000>;
-				};
-			};
-
-			port@1 {
-				label = "lan1";
-				phy-handle = <&switch0phy1>;
-				reg = <1>;
-			};
-
-			port@2 {
-				label = "lan2";
-				phy-handle = <&switch0phy2>;
-				reg = <2>;
-			};
-
-			port@3 {
-				label = "lan3";
-				phy-handle = <&switch0phy3>;
-				reg = <3>;
-			};
-
-			port@4 {
-				label = "lan4";
-				phy-handle = <&switch0phy4>;
-				reg = <4>;
-			};
-
-			port@5 {
-				label = "lan5";
-				phy-handle = <&switch0phy5>;
-				reg = <5>;
-			};
-
-			port@6 {
-				label = "lan6";
-				phy-handle = <&switch0phy6>;
-				reg = <6>;
-			};
-
-			port@7 {
-				label = "lan7";
-				phy-handle = <&switch0phy7>;
-				reg = <7>;
-			};
-
-			port@8 {
-				label = "lan8";
-				phy-handle = <&switch0phy8>;
-				reg = <8>;
-			};
-
-			port@9 {
-				/* 88X3310P external phy */
-				label = "lan9";
-				phy-handle = <&phy1>;
-				phy-mode = "xaui";
-				reg = <9>;
-			};
-
-			port@a {
-				/* 88X3310P external phy */
-				label = "lan10";
-				phy-handle = <&phy2>;
-				phy-mode = "xaui";
-				reg = <0xa>;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	front_button_pins: front-button-pins {
-		marvell,pins = "mpp38";
-		marvell,function = "gpio";
-	};
-
-	switch_interrupt_pins: switch-interrupt-pins {
-		marvell,pins = "mpp39";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	pinctrl-0 = <&spi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <3000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "boot";
-				read-only;
-				reg = <0x00000000 0x00100000>;
-			};
-
-			partition@100000 {
-				label = "env";
-				reg = <0x00100000 0x00010000>;
-			};
-
-			partition@200000 {
-				label = "rsv";
-				reg = <0x00110000 0x00010000>;
-			};
-
-			partition@300000 {
-				label = "image0";
-				reg = <0x00120000 0x00900000>;
-			};
-
-			partition@400000 {
-				label = "config";
-				reg = <0x00a20000 0x00300000>;
-			};
-
-			partition@480000 {
-				label = "debug";
-				reg = <0x00d20000 0x002e0000>;
-			};
-		};
-	};
-};
-
-&uart0 {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts b/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts
deleted file mode 100644
index 584f0d0398a51..0000000000000
--- a/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for Marvell Armada 382 reference board
- * (RD-AC3X-48G4X2XL)
- *
- * Copyright (C) 2020 Allied Telesis Labs
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Marvell Armada 382 RD-AC3X";
-	compatible = "marvell,rd-ac3x-48g4x2xl", "marvell,rd-ac3x",
-			 "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		ethernet0 = &eth1;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-
-	eeprom@53{
-		compatible = "atmel,24c64";
-		reg = <0x53>;
-	};
-
-	/* CPLD device present at 0x3c. Function unknown */
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&eth1 {
-	status = "okay";
-	phy = <&phy0>;
-	phy-mode = "rgmii-id";
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie1 {
-	/* Port 0, Lane 0 */
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		nand-on-flash-bbt;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				reg = <0x00000000 0x00500000>;
-				label = "u-boot";
-			};
-			partition@500000{
-				reg = <0x00500000 0x00400000>;
-				label = "u-boot env";
-			};
-			partition@900000{
-				reg = <0x00900000 0x3F700000>;
-				label = "user";
-			};
-		};
-	};
-};
-
-&refclk {
-	clock-frequency = <200000000>;
-};
diff --git a/arch/arm/boot/dts/armada-385-atl-x530.dts b/arch/arm/boot/dts/armada-385-atl-x530.dts
deleted file mode 100644
index 241f5d7c80e9a..0000000000000
--- a/arch/arm/boot/dts/armada-385-atl-x530.dts
+++ /dev/null
@@ -1,235 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for Armada 385 Allied Telesis x530/GS980MX Board.
- (x530/AT-GS980MX)
- *
- Copyright (C) 2020 Allied Telesis Labs
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "x530/AT-GS980MX";
-	compatible = "alliedtelesis,gs980mx", "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial1:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			i2c0: i2c@11000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins>;
-				status = "okay";
-			};
-
-			uart0: serial@12000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart0_pins>;
-				status = "okay";
-			};
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-	reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-	reset-delay-us = <400000>;
-};
-
-&pcie2 {
-	status = "okay";
-};
-
-&devbus_cs1 {
-	compatible = "marvell,mvebu-devbus";
-	status = "okay";
-
-	devbus,bus-width    = <8>;
-	devbus,turn-off-ps  = <60000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <124000>;
-	devbus,acc-next-ps  = <248000>;
-	devbus,rd-setup-ps  = <0>;
-	devbus,rd-hold-ps   = <0>;
-
-	/* Write parameters */
-	devbus,sync-enable = <0>;
-	devbus,wr-high-ps  = <60000>;
-	devbus,wr-low-ps   = <60000>;
-	devbus,ale-wr-ps   = <60000>;
-
-	nvs@0 {
-		status = "okay";
-
-		compatible = "mtd-ram";
-		reg = <0 0x00080000>;
-		bank-width = <1>;
-		label = "nvs";
-	};
-};
-
-&pinctrl {
-	i2c0_gpio_pins: i2c-gpio-pins-0 {
-		marvell,pins = "mpp2", "mpp3";
-		marvell,function = "gpio";
-	};
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-1 = <&i2c0_gpio_pins>;
-	scl-gpio = <&gpio0 2 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	sda-gpio = <&gpio0 3 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-
-	i2c0mux: mux@71 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nxp,pca9544";
-		reg = <0x71>;
-		i2c-mux-idle-disconnect;
-
-		i2c@0 { /* POE devices MUX */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			adt7476_2e: hwmon@2e {
-				compatible = "adi,adt7476";
-				reg = <0x2e>;
-			};
-
-			adt7476_2d: hwmon@2d {
-				compatible = "adi,adt7476";
-				reg = <0x2d>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			rtc@68 {
-				compatible = "dallas,ds1340";
-				reg = <0x68>;
-			};
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			gpio@20 {
-				compatible = "nxp,pca9554";
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x20>;
-			};
-		};
-	};
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-	status = "okay";
-
-	flash@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <1>; /* Chip select 1 */
-		spi-max-frequency = <54000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@u-boot {
-				reg = <0x00000000 0x00100000>;
-				label = "u-boot";
-			};
-			partition@u-boot-env {
-				reg = <0x00100000 0x00040000>;
-				label = "u-boot-env";
-			};
-			partition@unused {
-				reg = <0x00140000 0x00e80000>;
-				label = "unused";
-			};
-			partition@idprom {
-				reg = <0x00fc0000 0x00040000>;
-				label = "idprom";
-			};
-		};
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		marvell,nand-enable-arbiter;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@user {
-				reg = <0x00000000 0x0f000000>;
-				label = "user";
-			};
-			partition@errlog {
-				/* Maximum mtdoops size is 8MB, so set to that. */
-				reg = <0x0f000000 0x00800000>;
-				label = "errlog";
-			};
-			partition@nand-bbt {
-				reg = <0x0f800000 0x00800000>;
-				label = "nand-bbt";
-			};
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
deleted file mode 100644
index 1990f7d0cc79a..0000000000000
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-
-#include "armada-385-clearfog-gtr.dtsi"
-
-/ {
-	model = "SolidRun Clearfog GTR L8";
-};
-
-&mdio {
-	switch0: switch0@4 {
-		compatible = "marvell,mv88e6190";
-		reg = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
-		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-				label = "lan8";
-				phy-handle = <&switch0phy0>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan7";
-				phy-handle = <&switch0phy1>;
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan6";
-				phy-handle = <&switch0phy2>;
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan5";
-				phy-handle = <&switch0phy3>;
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "lan4";
-				phy-handle = <&switch0phy4>;
-			};
-
-			port@6 {
-				reg = <6>;
-				label = "lan3";
-				phy-handle = <&switch0phy5>;
-			};
-
-			port@7 {
-				reg = <7>;
-				label = "lan2";
-				phy-handle = <&switch0phy6>;
-			};
-
-			port@8 {
-				reg = <8>;
-				label = "lan1";
-				phy-handle = <&switch0phy7>;
-			};
-
-			port@10 {
-				reg = <10>;
-				phy-mode = "2500base-x";
-
-				ethernet = <&eth1>;
-				fixed-link {
-					speed = <2500>;
-					full-duplex;
-				};
-			};
-
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switch0phy0: switch0phy0@1 {
-				reg = <0x1>;
-			};
-
-			switch0phy1: switch0phy1@2 {
-				reg = <0x2>;
-			};
-
-			switch0phy2: switch0phy2@3 {
-				reg = <0x3>;
-			};
-
-			switch0phy3: switch0phy3@4 {
-				reg = <0x4>;
-			};
-
-			switch0phy4: switch0phy4@5 {
-				reg = <0x5>;
-			};
-
-			switch0phy5: switch0phy5@6 {
-				reg = <0x6>;
-			};
-
-			switch0phy6: switch0phy6@7 {
-				reg = <0x7>;
-			};
-
-			switch0phy7: switch0phy7@8 {
-				reg = <0x8>;
-			};
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
deleted file mode 100644
index b795ad573891e..0000000000000
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-
-#include "armada-385-clearfog-gtr.dtsi"
-
-/ {
-	model = "SolidRun Clearfog GTR S4";
-};
-
-&sfp0 {
-	tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-};
-
-&mdio {
-	switch0: switch0@4 {
-		compatible = "marvell,mv88e6085";
-		reg = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
-		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-				phy-handle = <&switch0phy0>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan1";
-				phy-handle = <&switch0phy1>;
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-				phy-handle = <&switch0phy2>;
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan3";
-				phy-handle = <&switch0phy3>;
-			};
-
-			port@5 {
-				reg = <5>;
-				phy-mode = "2500base-x";
-				ethernet = <&eth1>;
-
-				fixed-link {
-					speed = <2500>;
-					full-duplex;
-				};
-			};
-
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switch0phy0: switch0phy0@11 {
-				reg = <0x11>;
-			};
-
-			switch0phy1: switch0phy1@12 {
-				reg = <0x12>;
-			};
-
-			switch0phy2: switch0phy2@13 {
-				reg = <0x13>;
-			};
-
-			switch0phy3: switch0phy3@14 {
-				reg = <0x14>;
-			};
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
deleted file mode 100644
index d1452a04e9040..0000000000000
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
+++ /dev/null
@@ -1,450 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for Clearfog GTR machines rev 1.0 (88F6825)
- *
- *  Rabeeh Khoury <rabeeh@solid-run.com>, based on Russell King clearfog work
- */
-
-/*
-	SERDES mapping -
-	0. SATA1 on CON18, or optionally mini PCIe CON3 - PCIe0
-	1. 6141 switch (2.5Gbps capable)
-	2. SATA0 on CON17, or optionally mini PCIe CON4 - PCIe1
-	3. USB 3.0 Host
-	4. mini PCIe CON2 - PCIe2
-	5. SFP connector, or optionally SGMII Ethernet 1512 PHY
-
-	USB 2.0 mapping -
-	0. USB 2.0 - 0 USB pins header CON12
-	1. USB 2.0 - 1 mini PCIe CON2
-	2. USB 2.0 - 2 to USB 3.0 connector (used with SERDES #3)
-
-	Pin mapping -
-	0,1 - console UART
-	2,3 - I2C0 - connected to I2C EEPROM, two temperature sensors,
-	      front panel and PSE controller
-	4,5 - MDC/MDIO
-	6..17 - RGMII
-	18 - Topaz switch reset (active low)
-	19 - 1512 phy reset
-	20 - 1512 phy reset (eth2, optional)
-	21,28,37,38,39,40 - SD0
-	22 - USB 3.0 current limiter enable (active high)
-	24 - SFP TX fault (input active high)
-	25 - SFP present (input active low)
-	26,27 - I2C1 - connected to SFP
-	29 - Fan PWM
-	30 - CON4 mini PCIe wifi disable
-	31 - CON3 mini PCIe wifi disable
-	32 - Fuse programming power toggle (1.8v)
-	33 - CON4 mini PCIe reset
-	34 - CON2 mini PCIe wifi disable
-	35 - CON3 mini PCIe reset
-	36 - Rear button (GPIO active low)
-	41 - CON1 front panel connector
-	42 - Front LED1, or front panel CON1
-	43 - Micron L-PBGA 24 ball SPI (1Gb) CS, or TPM SPI CS
-	44 - CON2 mini PCIe reset
-	45 - TPM PIRQ signal, or front panel CON1
-	46 - SFP TX disable
-	47 - Control isolation of boot sensitive SAR signals
-	48 - PSE reset
-	49 - PSE OSS signal
-	50 - PSE interrupt
-	52 - Front LED2, or front panel
-	53 - Front button
-	54 - SFP LOS (input active high)
-	55 - Fan sense
-	56(mosi),57(clk),58(miso) - SPI interface - 32Mb SPI, 1Gb SPI and TPM
-	59 - SPI 32Mb W25Q32BVZPIG CS0 chip select (bootable)
-*/
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-385.dtsi"
-
-/ {
-	compatible = "marvell,armada385", "marvell,armada380";
-
-	aliases {
-		/* So that mvebu u-boot can update the MAC addresses */
-		ethernet1 = &eth0;
-		ethernet2 = &eth1;
-		ethernet3 = &eth2;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	v_usb3_con: regulator-v-usb3-con {
-		compatible = "regulator-fixed";
-		gpio = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cf_gtr_usb3_con_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb3_con";
-		vin-supply = <&reg_5p0v>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-
-			rtc@a3800 {
-				status = "okay";
-			};
-
-			i2c@11000 { /* ROM, temp sensor and front panel */
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			i2c@11100 { /* SFP (CON5/CON6) */
-				pinctrl-0 = <&cf_gtr_i2c1_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			pinctrl@18000 {
-				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
-					marvell,pins = "mpp18";
-					marvell,function = "gpio";
-				};
-
-				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
-					marvell,pins = "mpp22";
-					marvell,function = "gpio";
-				};
-
-				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
-					marvell,pins = "mpp23";
-					marvell,function = "gpio";
-				};
-
-				cf_gtr_i2c1_pins: i2c1-pins {
-					/* SFP */
-					marvell,pins = "mpp26", "mpp27";
-					marvell,function = "i2c1";
-				};
-
-				cf_gtr_sdhci_pins: cf-gtr-sdhci-pins {
-					marvell,pins = "mpp21", "mpp28",
-						       "mpp37", "mpp38",
-						       "mpp39", "mpp40";
-					marvell,function = "sd0";
-				};
-
-				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
-					marvell,pins = "mpp47";
-					marvell,function = "gpio";
-				};
-
-				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
-					marvell,pins = "mpp48";
-					marvell,function = "gpio";
-				};
-
-				cf_gtr_spi1_cs_pins: spi1-cs-pins {
-					marvell,pins = "mpp59";
-					marvell,function = "spi1";
-				};
-
-				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
-					marvell,pins = "mpp53";
-					marvell,function = "gpio";
-				};
-
-				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
-					marvell,pins = "mpp36";
-					marvell,function = "gpio";
-				};
-			};
-
-			sdhci@d8000 {
-				bus-width = <4>;
-				no-1-8-v;
-				non-removable;
-				pinctrl-0 = <&cf_gtr_sdhci_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				vmmc = <&reg_3p3v>;
-				wp-inverted;
-			};
-
-			usb@58000 {
-				status = "okay";
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				vbus-supply = <&v_usb3_con>;
-				status = "okay";
-			};
-		};
-
-		pcie {
-			status = "okay";
-			/*
-			 * The PCIe units are accessible through
-			 * the mini-PCIe connectors on the board.
-			 */
-			pcie@1,0 {
-				reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-				status = "okay";
-			};
-
-			pcie@3,0 {
-				reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-				status = "okay";
-			};
-		};
-	};
-
-	sfp0: sfp {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
-		pinctrl-names = "default";
-
-		button-0 {
-			label = "Rear Button";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,can-disable;
-			linux,code = <BTN_0>;
-		};
-
-		button-1 {
-			label = "Front Button";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			linux,can-disable;
-			linux,code = <BTN_1>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			function = LED_FUNCTION_CPU;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		led2 {
-			function = LED_FUNCTION_HEARTBEAT;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&bm {
-	status = "okay";
-};
-
-&bm_bppi {
-	status = "okay";
-};
-
-&eth0 {
-	/* ethernet@70000 */
-	pinctrl-0 = <&ge0_rgmii_pins>;
-	pinctrl-names = "default";
-	phy = <&phy_dedicated>;
-	phy-mode = "rgmii-id";
-	buffer-manager = <&bm>;
-	bm,pool-long = <0>;
-	bm,pool-short = <1>;
-	status = "okay";
-};
-
-&eth1 {
-	/* ethernet@30000 */
-	bm,pool-long = <2>;
-	bm,pool-short = <1>;
-	buffer-manager = <&bm>;
-	phys = <&comphy1 1>;
-	phy-mode = "2500base-x";
-	status = "okay";
-
-	fixed-link {
-		speed = <2500>;
-		full-duplex;
-	};
-};
-
-&eth2 {
-	/* ethernet@34000 */
-	bm,pool-long = <3>;
-	bm,pool-short = <1>;
-	buffer-manager = <&bm>;
-	managed = "in-band-status";
-	phys = <&comphy5 1>;
-	phy-mode = "sgmii";
-	sfp = <&sfp0>;
-	status = "okay";
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-	status = "okay";
-
-	phy_dedicated: ethernet-phy@0 {
-		/*
-		 * Annoyingly, the marvell phy driver configures the LED
-		 * register, rather than preserving reset-loaded setting.
-		 * We undo that rubbish here.
-		 */
-		marvell,reg-init = <3 16 0 0x1017>;
-		reg = <0>;
-	};
-};
-
-&uart0 {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&spi1 {
-	/*
-	 * CS0: W25Q32 flash
-	 */
-	pinctrl-0 = <&spi1_pins &cf_gtr_spi1_cs_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "w25q32", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <3000000>;
-		status = "okay";
-	};
-};
-
-&i2c0 {
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	/* U26 temperature sensor placed near SoC */
-	temp1: nct75@4c {
-		compatible = "lm75";
-		reg = <0x4c>;
-	};
-
-	/* U27 temperature sensor placed near RTC battery */
-	temp2: nct75@4d {
-		compatible = "lm75";
-		reg = <0x4d>;
-	};
-
-	/* 2Kb eeprom */
-	eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-	};
-};
-
-&ahci0 {
-	status = "okay";
-};
-
-&ahci1 {
-	status = "okay";
-};
-
-&gpio0 {
-	pinctrl-0 = <&cf_gtr_fan_pwm>;
-	pinctrl-names = "default";
-
-	wifi-disable {
-		gpio-hog;
-		gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "wifi-disable";
-	};
-};
-
-&gpio1 {
-	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>;
-	pinctrl-names = "default";
-
-	lte-disable {
-		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "lte-disable";
-	};
-
-	/*
-	 * This signal, when asserted, isolates Armada 38x sample at reset pins
-	 * from control of external devices. Should be de-asserted after reset.
-	 */
-	sar-isolation {
-		gpio-hog;
-		gpios = <15 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "sar-isolation";
-	};
-
-	poe-reset {
-		gpio-hog;
-		gpios = <16 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "poe-reset";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
deleted file mode 100644
index 389d9c75d546a..0000000000000
--- a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for Marvell Armada 385 AMC board
- * (DB-88F6820-AMC)
- *
- * Copyright (C) 2017 Allied Telesis Labs
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Marvell Armada 385 AMC";
-	compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-		spi1 = &spi1;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-};
-
-&uart0 {
-	/*
-	 * Exported on the micro USB connector CON3
-	 * through an FTDI
-	 */
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-
-&eth0 {
-	pinctrl-names = "default";
-	/*
-	 * The Reference Clock 0 is used to provide a
-	 * clock to the PHY
-	 */
-	pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
-	status = "okay";
-	phy = <&phy0>;
-	phy-mode = "rgmii-id";
-};
-
-&eth2 {
-	status = "okay";
-	phy = <&phy1>;
-	phy-mode = "sgmii";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-
-	phy0: ethernet-phy@1 {
-		reg = <1>;
-	};
-
-	phy1: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		nand-on-flash-bbt;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				reg = <0x00000000 0x40000000>;
-				label = "user";
-			};
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie1 {
-	/* Port 0, Lane 0 */
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <50000000>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				reg = <0x00000000 0x00100000>;
-				label = "u-boot";
-			};
-			partition@100000 {
-				reg = <0x00100000 0x00040000>;
-				label = "u-boot-env";
-			};
-		};
-	};
-};
-
-&refclk {
-	clock-frequency = <20000000>;
-};
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
deleted file mode 100644
index 332f8fce77dc2..0000000000000
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for Marvell Armada 385 Access Point Development board
- * (DB-88F6820-AP)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Nadav Haklai <nadavh@marvell.com>
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Marvell Armada 385 Access Point Development Board";
-	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial1:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-			i2c0: i2c@11000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins>;
-				status = "okay";
-
-				/*
-				 * This bus is wired to two EEPROM
-				 * sockets, one of which holding the
-				 * board ID used by the	bootloader.
-				 * Erasing this EEPROM's content will
-				 * brick the board.
-				 * Use this bus with caution.
-				 */
-			};
-
-			mdio@72004 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&mdio_pins>;
-
-				phy0: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy1: ethernet-phy@4 {
-					reg = <4>;
-				};
-
-				phy2: ethernet-phy@6 {
-					reg = <6>;
-				};
-			};
-
-			/* UART0 is exposed through the JP8 connector */
-			uart0: serial@12000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart0_pins>;
-				status = "okay";
-			};
-
-			/*
-			 * UART1 is exposed through a FTDI chip
-			 * wired to the mini-USB connector
-			 */
-			uart1: serial@12100 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart1_pins>;
-				status = "okay";
-			};
-
-			pinctrl@18000 {
-				xhci0_vbus_pins: xhci0-vbus-pins {
-					marvell,pins = "mpp44";
-					marvell,function = "gpio";
-				};
-			};
-
-			/* CON3 */
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <1>;
-				bm,pool-short = <3>;
-			};
-
-			/* CON2 */
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-				bm,pool-short = <3>;
-			};
-
-			usb@58000 {
-				status = "okay";
-			};
-
-			/* CON4 */
-			ethernet@70000 {
-				pinctrl-names = "default";
-
-				/*
-				 * The Reference Clock 0 is used to
-				 * provide a clock to the PHY
-				 */
-				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-				bm,pool-short = <3>;
-			};
-
-			bm@c8000 {
-				status = "okay";
-			};
-
-			usb3@f0000 {
-				status = "okay";
-				usb-phy = <&usb3_phy>;
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-
-		pcie {
-			status = "okay";
-
-			/*
-			 * The three PCIe units are accessible through
-			 * standard mini-PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@3,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-
-	usb3_phy: usb3_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_xhci0_vbus>;
-		#phy-cells = <0>;
-	};
-
-	reg_xhci0_vbus: xhci0-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&xhci0_vbus_pins>;
-		regulator-name = "xhci0-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p128", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <54000000>;
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0x00000000 0x00800000>;
-				read-only;
-			};
-
-			partition@800000 {
-				label = "uImage";
-				reg = <0x00800000 0x00400000>;
-				read-only;
-			};
-
-			partition@c00000 {
-				label = "Root";
-				reg = <0x00c00000 0x3f400000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
deleted file mode 100644
index 88b2921fed55b..0000000000000
--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree include for the Linksys WRT1200AC (Caiman)
- *
- * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- */
-
-/dts-v1/;
-#include "armada-385-linksys.dtsi"
-
-/ {
-	model = "Linksys WRT1200AC";
-	compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
-		     "marvell,armada380";
-};
-
-&expander0 {
-	wan_amber@0 {
-		label = "caiman:amber:wan";
-		reg = <0x0>;
-	};
-
-	wan_white@1 {
-		label = "caiman:white:wan";
-		reg = <0x1>;
-	};
-
-	wlan_2g@2 {
-		label = "caiman:white:wlan_2g";
-		reg = <0x2>;
-	};
-
-	wlan_5g@3 {
-		label = "caiman:white:wlan_5g";
-		reg = <0x3>;
-	};
-
-	usb2@5 {
-		label = "caiman:white:usb2";
-		reg = <0x5>;
-	};
-
-	usb3_1@6 {
-		label = "caiman:white:usb3_1";
-		reg = <0x6>;
-	};
-
-	usb3_2@7 {
-		label = "caiman:white:usb3_2";
-		reg = <0x7>;
-	};
-
-	wps_white@8 {
-		label = "caiman:white:wps";
-		reg = <0x8>;
-	};
-
-	wps_amber@9 {
-		label = "caiman:amber:wps";
-		reg = <0x9>;
-	};
-};
-
-&gpio_leds {
-	led-power {
-		label = "caiman:white:power";
-	};
-
-	led-sata {
-		label = "caiman:white:sata";
-	};
-};
-
-&nand {
-	/* 128MiB */
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0000000 0x200000>;  /* 2MiB */
-			read-only;
-		};
-
-		partition@100000 {
-			label = "u_env";
-			reg = <0x200000 0x40000>;    /* 256KiB */
-		};
-
-		partition@140000 {
-			label = "s_env";
-			reg = <0x240000 0x40000>;    /* 256KiB */
-		};
-
-		partition@900000 {
-			label = "devinfo";
-			reg = <0x900000 0x100000>;   /* 1MiB */
-			read-only;
-		};
-
-		/* kernel1 overlaps with rootfs1 by design */
-		partition@a00000 {
-			label = "kernel1";
-			reg = <0xa00000 0x2800000>;  /* 40MiB */
-		};
-
-		partition@1000000 {
-			label = "rootfs1";
-			reg = <0x1000000 0x2200000>;  /* 34MiB */
-		};
-
-		/* kernel2 overlaps with rootfs2 by design */
-		partition@3200000 {
-			label = "kernel2";
-			reg = <0x3200000 0x2800000>; /* 40MiB */
-		};
-
-		partition@3800000 {
-			label = "rootfs2";
-			reg = <0x3800000 0x2200000>; /* 34MiB */
-		};
-
-		/*
-		 * 38MiB, last MiB is for the BBT, not writable
-		 */
-		partition@5a00000 {
-			label = "syscfg";
-			reg = <0x5a00000 0x2600000>;
-		};
-
-		/*
-		 * Unused area between "s_env" and "devinfo".
-		 * Moved here because otherwise the renumbered
-		 * partitions would break the bootloader
-		 * supplied bootargs
-		 */
-		partition@180000 {
-			label = "unused_area";
-			reg = <0x280000 0x680000>;   /* 6.5MiB */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
deleted file mode 100644
index 88200f930d0d8..0000000000000
--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for the Linksys WRT1900ACv2 (Cobra)
- *
- * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- */
-
-/dts-v1/;
-#include "armada-385-linksys.dtsi"
-
-/ {
-	model = "Linksys WRT1900ACv2";
-	compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
-		     "marvell,armada380";
-};
-
-&expander0 {
-	wan_amber@0 {
-		label = "cobra:amber:wan";
-		reg = <0x0>;
-	};
-
-	wan_white@1 {
-		label = "cobra:white:wan";
-		reg = <0x1>;
-	};
-
-	wlan_2g@2 {
-		label = "cobra:white:wlan_2g";
-		reg = <0x2>;
-	};
-
-	wlan_5g@3 {
-		label = "cobra:white:wlan_5g";
-		reg = <0x3>;
-	};
-
-	usb2@5 {
-		label = "cobra:white:usb2";
-		reg = <0x5>;
-	};
-
-	usb3_1@6 {
-		label = "cobra:white:usb3_1";
-		reg = <0x6>;
-	};
-
-	usb3_2@7 {
-		label = "cobra:white:usb3_2";
-		reg = <0x7>;
-	};
-
-	wps_white@8 {
-		label = "cobra:white:wps";
-		reg = <0x8>;
-	};
-
-	wps_amber@9 {
-		label = "cobra:amber:wps";
-		reg = <0x9>;
-	};
-};
-
-&gpio_leds {
-	led-power {
-		label = "cobra:white:power";
-	};
-
-	led-sata {
-		label = "cobra:white:sata";
-	};
-};
-
-&nand {
-	/* 128MiB */
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0000000 0x200000>;  /* 2MiB */
-			read-only;
-		};
-
-		partition@100000 {
-			label = "u_env";
-			reg = <0x200000 0x40000>;    /* 256KiB */
-		};
-
-		partition@140000 {
-			label = "s_env";
-			reg = <0x240000 0x40000>;    /* 256KiB */
-		};
-
-		partition@900000 {
-			label = "devinfo";
-			reg = <0x900000 0x100000>;   /* 1MiB */
-			read-only;
-		};
-
-		/* kernel1 overlaps with rootfs1 by design */
-		partition@a00000 {
-			label = "kernel1";
-			reg = <0xa00000 0x2800000>;  /* 40MiB */
-		};
-
-		partition@1000000 {
-			label = "rootfs1";
-			reg = <0x1000000 0x2200000>;  /* 34MiB */
-		};
-
-		/* kernel2 overlaps with rootfs2 by design */
-		partition@3200000 {
-			label = "kernel2";
-			reg = <0x3200000 0x2800000>; /* 40MiB */
-		};
-
-		partition@3800000 {
-			label = "rootfs2";
-			reg = <0x3800000 0x2200000>; /* 34MiB */
-		};
-
-		/*
-		 * 38MiB, last MiB is for the BBT, not writable
-		 */
-		partition@5a00000 {
-			label = "syscfg";
-			reg = <0x5a00000 0x2600000>;
-		};
-
-		/*
-		 * Unused area between "s_env" and "devinfo".
-		 * Moved here because otherwise the renumbered
-		 * partitions would break the bootloader
-		 * supplied bootargs
-		 */
-		partition@180000 {
-			label = "unused_area";
-			reg = <0x280000 0x680000>;   /* 6.5MiB */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts
deleted file mode 100644
index 4ab45f294de22..0000000000000
--- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
+++ /dev/null
@@ -1,176 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for the Linksys WRT3200ACM (Rango)
- *
- * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385-linksys.dtsi"
-
-/ {
-	model = "Linksys WRT3200ACM";
-	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
-		     "marvell,armada380";
-};
-
-&expander0 {
-	wan_amber@0 {
-		label = "rango:amber:wan";
-		reg = <0x0>;
-	};
-
-	wan_white@1 {
-		label = "rango:white:wan";
-		reg = <0x1>;
-	};
-
-	usb2@5 {
-		label = "rango:white:usb2";
-		reg = <0x5>;
-	};
-
-	usb3_1@6 {
-		label = "rango:white:usb3_1";
-		reg = <0x6>;
-	};
-
-	usb3_2@7 {
-		label = "rango:white:usb3_2";
-		reg = <0x7>;
-	};
-
-	wps_white@8 {
-		label = "rango:white:wps";
-		reg = <0x8>;
-	};
-
-	wps_amber@9 {
-		label = "rango:amber:wps";
-		reg = <0x9>;
-	};
-};
-
-&gpio_leds {
-	led-power {
-		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-		label = "rango:white:power";
-	};
-
-	led-sata {
-		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		label = "rango:white:sata";
-	};
-
-	led-wlan_2g {
-		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		label = "rango:white:wlan_2g";
-	};
-
-	led-wlan_5g {
-		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		label = "rango:white:wlan_5g";
-	};
-};
-
-&gpio_leds_pins {
-	marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
-};
-
-&nand {
-	/* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0000000 0x200000>;  /* 2MiB */
-			read-only;
-		};
-
-		partition@200000 {
-			label = "u_env";
-			reg = <0x200000 0x20000>;    /* 128KiB */
-		};
-
-		partition@220000 {
-			label = "s_env";
-			reg = <0x220000 0x40000>;    /* 256KiB */
-		};
-
-		partition@7e0000 {
-			label = "devinfo";
-			reg = <0x7e0000 0x40000>;   /* 256KiB */
-			read-only;
-		};
-
-		partition@820000 {
-			label = "sysdiag";
-			reg = <0x820000 0x1e0000>;   /* 1920KiB */
-			read-only;
-		};
-
-		/* kernel1 overlaps with rootfs1 by design */
-		partition@a00000 {
-			label = "kernel1";
-			reg = <0xa00000 0x5000000>;  /* 80MiB */
-		};
-
-		partition@1000000 {
-			label = "rootfs1";
-			reg = <0x1000000 0x4a00000>;  /* 74MiB */
-		};
-
-		/* kernel2 overlaps with rootfs2 by design */
-		partition@5a00000 {
-			label = "kernel2";
-			reg = <0x5a00000 0x5000000>; /* 80MiB */
-		};
-
-		partition@6000000 {
-			label = "rootfs2";
-			reg = <0x6000000 0x4a00000>; /* 74MiB */
-		};
-
-		/*
-		 * 86MiB, last MiB is for the BBT, not writable
-		 */
-		partition@aa00000 {
-			label = "syscfg";
-			reg = <0xaa00000 0x5600000>;
-		};
-
-		/*
-		 * Unused area between "s_env" and "devinfo".
-		 * Moved here because otherwise the renumbered
-		 * partitions would break the bootloader
-		 * supplied bootargs
-		 */
-		partition@180000 {
-			label = "unused_area";
-			reg = <0x260000 0x5c0000>;   /* 5.75MiB */
-		};
-	};
-};
-
-&sdhci {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhci_pins>;
-	no-1-8-v;
-	non-removable;
-	wp-inverted;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&usb3_1_vbus {
-	gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_1_vbus_pins {
-	marvell,pins = "mpp44";
-};
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
deleted file mode 100644
index f1b1f22413f1b..0000000000000
--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for the Linksys WRT1900ACS (Shelby)
- *
- * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- */
-
-/dts-v1/;
-#include "armada-385-linksys.dtsi"
-
-/ {
-	model = "Linksys WRT1900ACS";
-	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
-		     "marvell,armada380";
-};
-
-&expander0 {
-	wan_amber@0 {
-		label = "shelby:amber:wan";
-		reg = <0x0>;
-	};
-
-	wan_white@1 {
-		label = "shelby:white:wan";
-		reg = <0x1>;
-	};
-
-	wlan_2g@2 {
-		label = "shelby:white:wlan_2g";
-		reg = <0x2>;
-	};
-
-	wlan_5g@3 {
-		label = "shelby:white:wlan_5g";
-		reg = <0x3>;
-	};
-
-	usb2@5 {
-		label = "shelby:white:usb2";
-		reg = <0x5>;
-	};
-
-	usb3_1@6 {
-		label = "shelby:white:usb3_1";
-		reg = <0x6>;
-	};
-
-	usb3_2@7 {
-		label = "shelby:white:usb3_2";
-		reg = <0x7>;
-	};
-
-	wps_white@8 {
-		label = "shelby:white:wps";
-		reg = <0x8>;
-	};
-
-	wps_amber@9 {
-		label = "shelby:amber:wps";
-		reg = <0x9>;
-	};
-};
-
-&gpio_leds {
-	led-power {
-		label = "shelby:white:power";
-	};
-
-	led-sata {
-		label = "shelby:white:sata";
-	};
-};
-
-&nand {
-	/* 128MiB */
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0000000 0x200000>;  /* 2MiB */
-			read-only;
-		};
-
-		partition@100000 {
-			label = "u_env";
-			reg = <0x200000 0x40000>;    /* 256KiB */
-		};
-
-		partition@140000 {
-			label = "s_env";
-			reg = <0x240000 0x40000>;    /* 256KiB */
-		};
-
-		partition@900000 {
-			label = "devinfo";
-			reg = <0x900000 0x100000>;   /* 1MiB */
-			read-only;
-		};
-
-		/* kernel1 overlaps with rootfs1 by design */
-		partition@a00000 {
-			label = "kernel1";
-			reg = <0xa00000 0x2800000>;  /* 40MiB */
-		};
-
-		partition@1000000 {
-			label = "rootfs1";
-			reg = <0x1000000 0x2200000>;  /* 34MiB */
-		};
-
-		/* kernel2 overlaps with rootfs2 by design */
-		partition@3200000 {
-			label = "kernel2";
-			reg = <0x3200000 0x2800000>; /* 40MiB */
-		};
-
-		partition@3800000 {
-			label = "rootfs2";
-			reg = <0x3800000 0x2200000>; /* 34MiB */
-		};
-
-		/*
-		 * 38MiB, last MiB is for the BBT, not writable
-		 */
-		partition@5a00000 {
-			label = "syscfg";
-			reg = <0x5a00000 0x2600000>;
-		};
-
-		/*
-		 * Unused area between "s_env" and "devinfo".
-		 * Moved here because otherwise the renumbered
-		 * partitions would break the bootloader
-		 * supplied bootargs
-		 */
-		partition@180000 {
-			label = "unused_area";
-			reg = <0x280000 0x680000>;   /* 6.5MiB */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
deleted file mode 100644
index fc8216fd9f600..0000000000000
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ /dev/null
@@ -1,265 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree include file for Armada 385 based Linksys boards
- *
- * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385.dtsi"
-
-/ {
-	model = "Linksys boards based on Armada 385";
-	compatible = "linksys,armada385", "marvell,armada385",
-		     "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MiB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-	};
-
-	usb3_1_phy: usb3_1-phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&usb3_1_vbus>;
-		#phy-cells = <0>;
-	};
-
-	usb3_1_vbus: usb3_1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_1_vbus_pins>;
-		regulator-name = "usb3_1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio_keys: gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&gpio_keys_pins>;
-		pinctrl-names = "default";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		button-reset {
-			label = "Factory Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds: gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&gpio_leds_pins>;
-		pinctrl-names = "default";
-
-		led-power {
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led-sata {
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "disk-activity";
-		};
-	};
-};
-
-&ahci0 {
-	status = "okay";
-};
-
-&bm {
-	status = "okay";
-};
-
-&bm_bppi {
-	status = "okay";
-};
-
-&eth0 {
-	status = "okay";
-	phy-mode = "rgmii-id";
-	buffer-manager = <&bm>;
-	bm,pool-long = <0>;
-	bm,pool-short = <1>;
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&eth2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	buffer-manager = <&bm>;
-	bm,pool-long = <2>;
-	bm,pool-short = <3>;
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-
-	tmp421@4c {
-		compatible = "ti,tmp421";
-		reg = <0x4c>;
-	};
-
-	expander0: pca9635@68 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nxp,pca9635";
-		reg = <0x68>;
-	};
-};
-
-&nand_controller {
-	/* 128MiB or 256MiB */
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand: nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	switch@0 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan4";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan3";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan1";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-
-			port@5 {
-				reg = <5>;
-				phy-mode = "sgmii";
-				ethernet = <&eth2>;
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie1 {
-	/* Marvell 88W8864, 5GHz-only */
-	status = "okay";
-};
-
-&pcie2 {
-	/* Marvell 88W8864, 2GHz-only */
-	status = "okay";
-};
-
-&pinctrl {
-	gpio_keys_pins: gpio-keys-pins {
-		/* mpp24: wps, mpp29: reset */
-		marvell,pins = "mpp24", "mpp29";
-		marvell,function = "gpio";
-	};
-
-	gpio_leds_pins: gpio-leds-pins {
-		/* mpp54: sata, mpp55: power */
-		marvell,pins = "mpp54", "mpp55";
-		marvell,function = "gpio";
-	};
-
-	usb3_1_vbus_pins: usb3_1-vbus-pins {
-		marvell,pins = "mpp50";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	status = "disabled";
-};
-
-&uart0 {
-	/* J10: VCC, NC, RX, NC, TX, GND  */
-	status = "okay";
-};
-
-&usb0 {
-	/* USB part of the eSATA/USB 2.0 port */
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-	usb-phy = <&usb3_1_phy>;
-};
-
-&rtc {
-	/* No crystal connected to the internal RTC */
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
deleted file mode 100644
index ea91ff964d94e..0000000000000
--- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
+++ /dev/null
@@ -1,292 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for Synology DS116 NAS
- *
- * Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Synology DS116";
-	compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins>;
-				status = "okay";
-				clock-frequency = <100000>;
-
-				eeprom@57 {
-					compatible = "atmel,24c64";
-					reg = <0x57>;
-				};
-			};
-
-			serial@12000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart0_pins>;
-				status = "okay";
-			};
-
-			serial@12100 {
-				/* A PIC16F1829 is connected to uart1 at 9600 bps,
-				 * and takes single-character orders :
-				 *   "1" : power off // already handled by the poweroff node
-				 *   "2" : short beep
-				 *   "3" : long beep
-				 *   "4" : turn the power LED ON
-				 *   "5" : flash the power LED
-				 *   "6" : turn the power LED OFF
-				 *   "7" : turn the status LED OFF
-				 *   "8" : turn the status LED ON
-				 *   "9" : flash the status LED
-				 *   "A" : flash the motherboard LED (D8)
-				 *   "B" : turn the motherboard LED OFF
-				 *   "C" : hard reset
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart1_pins>;
-				status = "okay";
-			};
-
-			poweroff@12100 {
-				compatible = "synology,power-off";
-				reg = <0x12100 0x100>;
-				clocks = <&coreclk 0>;
-			};
-
-			ethernet@70000 {
-				pinctrl-names = "default";
-				phy = <&phy0>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-				status = "okay";
-			};
-
-
-			mdio@72004 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&mdio_pins>;
-
-				phy0: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			sata@a8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&sata0_pins>;
-				status = "okay";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				sata0: sata-port@0 {
-					reg = <0>;
-					target-supply = <&reg_5v_sata0>;
-				};
-			};
-
-			bm@c8000 {
-				status = "okay";
-			};
-
-			usb3@f0000 {
-				usb-phy = <&usb3_0_phy>;
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				usb-phy = <&usb3_1_phy>;
-				status = "okay";
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-
-		gpio-fan {
-			compatible = "gpio-fan";
-			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
-				<&gpio1 17 GPIO_ACTIVE_HIGH>,
-				<&gpio1 16 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <   0 0
-					      1500 1
-					      2500 2
-					      3000 3
-					      3400 4
-					      3700 5
-					      3900 6
-					      4000 7>;
-			#cooling-cells = <2>;
-		};
-
-		gpio-leds {
-			compatible = "gpio-leds";
-
-			/* The green part is on gpio0.20 which is also used by
-			 * sata0, and accesses to SATA disk 0 make it blink so it
-			 * doesn't need to be declared here.
-			 */
-			led-orange {
-				gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-				label = "ds116:orange:disk";
-				default-state = "off";
-			};
-		};
-	};
-
-	usb3_0_phy: usb3_0_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_usb3_0_vbus>;
-		#phy-cells = <0>;
-	};
-
-	usb3_1_phy: usb3_1_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_usb3_1_vbus>;
-		#phy-cells = <0>;
-	};
-
-	reg_usb3_0_vbus: usb3-vbus0 {
-		compatible = "regulator-fixed";
-		regulator-name = "usb3-vbus0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&xhci0_vbus_pins>;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usb3_1_vbus: usb3-vbus1 {
-		compatible = "regulator-fixed";
-		regulator-name = "usb3-vbus1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&xhci1_vbus_pins>;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_sata0: pwr-sata0 {
-		compatible = "regulator-fixed";
-		regulator-name = "pwr_en_sata0";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		enable-active-high;
-		regulator-boot-on;
-		gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_5v_sata0: v5-sata0 {
-		compatible = "regulator-fixed";
-		regulator-name = "v5.0-sata0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_sata0>;
-	};
-
-	reg_12v_sata0: v12-sata0 {
-		compatible = "regulator-fixed";
-		regulator-name = "v12.0-sata0";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		vin-supply = <&reg_sata0>;
-	};
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "macronix,mx25l6405d", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <50000000>;
-		m25p,fast-read;
-
-		/* Note: there is a redboot partition table despite u-boot
-		 * being used. The names presented here are the same as those
-		 * found in the FIS directory. There is also a small device
-		 * tree in the last 64kB of the RedBoot partition which is not
-		 * enumerated. The MAC address and the serial number are listed
-		 * in the "vendor" partition.
-		 */
-		partition@0 {
-			label = "RedBoot";
-			reg = <0x00000000 0x000f0000>;
-			read-only;
-		};
-
-		partition@c0000 {
-			label = "zImage";
-			reg = <0x000f0000 0x002d0000>;
-		};
-
-		partition@390000 {
-			label = "rd.gz";
-			reg = <0x003c0000 0x00410000>;
-		};
-
-		partition@7d0000 {
-			label = "vendor";
-			reg = <0x007d0000 0x00010000>;
-			read-only;
-		};
-
-		partition@7e0000 {
-			label = "RedBoot config";
-			reg = <0x007e0000 0x00010000>;
-			read-only;
-		};
-
-		partition@7f0000 {
-			label = "FIS directory";
-			reg = <0x007f0000 0x00010000>;
-			read-only;
-		};
-	};
-};
-
-&pinctrl {
-	/* use only one pin for UART1, as mpp20 is used by sata0 */
-	uart1_pins: uart-pins-1 {
-		marvell,pins = "mpp19";
-		marvell,function = "ua1";
-	};
-
-	xhci0_vbus_pins: xhci0_vbus_pins {
-		marvell,pins = "mpp58";
-		marvell,function = "gpio";
-	};
-	xhci1_vbus_pins: xhci1_vbus_pins {
-		marvell,pins = "mpp59";
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
deleted file mode 100644
index 2d8d319bec830..0000000000000
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ /dev/null
@@ -1,571 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for the Turris Omnia
- *
- * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
- * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
- *
- * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-385.dtsi"
-
-/ {
-	model = "Turris Omnia";
-	compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	aliases {
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-		ethernet2 = &eth2;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1024 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-
-			/* USB part of the PCIe2/USB 2.0 port */
-			usb@58000 {
-				status = "okay";
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			sdhci@d8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdhci_pins>;
-				status = "okay";
-
-				bus-width = <8>;
-				no-1-8-v;
-				non-removable;
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		pcie {
-			status = "okay";
-
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-				slot-power-limit-milliwatt = <10000>;
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-				slot-power-limit-milliwatt = <10000>;
-			};
-
-			pcie@3,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-				slot-power-limit-milliwatt = <10000>;
-			};
-		};
-	};
-
-	sfp: sfp {
-		compatible = "sff,sfp";
-		i2c-bus = <&sfp_i2c>;
-		tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
-		rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
-		los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
-		maximum-power-milliwatt = <3000>;
-
-		/*
-		 * For now this has to be enabled at boot time by U-Boot when
-		 * a SFP module is present. Read more in the comment in the
-		 * eth2 node below.
-		 */
-		status = "disabled";
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "SPDIF";
-		simple-audio-card,format = "i2s";
-
-		simple-audio-card,cpu {
-			sound-dai = <&audio_controller 1>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&spdif_out>;
-		};
-	};
-
-	spdif_out: spdif-out {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dit";
-	};
-};
-
-&audio_controller {
-	/* Pin header U16, GPIO51 in SPDIFO mode */
-	pinctrl-0 = <&spdif_pins>;
-	pinctrl-names = "default";
-	spdif-mode;
-	status = "okay";
-};
-
-&bm {
-	status = "okay";
-};
-
-&bm_bppi {
-	status = "okay";
-};
-
-/* Connected to 88E6176 switch, port 6 */
-&eth0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ge0_rgmii_pins>;
-	status = "okay";
-	phy-mode = "rgmii";
-	buffer-manager = <&bm>;
-	bm,pool-long = <0>;
-	bm,pool-short = <3>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-/* Connected to 88E6176 switch, port 5 */
-&eth1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ge1_rgmii_pins>;
-	status = "okay";
-	phy-mode = "rgmii";
-	buffer-manager = <&bm>;
-	bm,pool-long = <1>;
-	bm,pool-short = <3>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-/* WAN port */
-&eth2 {
-	/*
-	 * eth2 is connected via a multiplexor to both the SFP cage and to
-	 * ethernet-phy@1. The multiplexor switches the signal to SFP cage when
-	 * a SFP module is present, as determined by the mode-def0 GPIO.
-	 *
-	 * Until kernel supports this configuration properly, in case SFP module
-	 * is present, U-Boot has to enable the sfp node above, remove phy
-	 * handle and add managed = "in-band-status" property.
-	 */
-	status = "okay";
-	phy-mode = "sgmii";
-	phy-handle = <&phy1>;
-	phys = <&comphy5 2>;
-	sfp = <&sfp>;
-	buffer-manager = <&bm>;
-	bm,pool-long = <2>;
-	bm,pool-short = <3>;
-	label = "wan";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-
-	i2cmux@70 {
-		compatible = "nxp,pca9547";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			/* STM32F0 command interface at address 0x2a */
-
-			led-controller@2b {
-				compatible = "cznic,turris-omnia-leds";
-				reg = <0x2b>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "okay";
-
-				/*
-				 * LEDs are controlled by MCU (STM32F0) at
-				 * address 0x2b.
-				 *
-				 * LED functions are not stable yet:
-				 * - there are 3 LEDs connected via MCU to PCIe
-				 *   ports. One of these ports supports mSATA.
-				 *   There is no mSATA nor PCIe function.
-				 *   For now we use LED_FUNCTION_WLAN, since
-				 *   in most cases users have wifi cards in
-				 *   these slots
-				 * - there are 2 LEDs dedicated for user: A and
-				 *   B. Again there is no such function defined.
-				 *   For now we use LED_FUNCTION_INDICATOR
-				 */
-
-				multi-led@0 {
-					reg = <0x0>;
-					color = <LED_COLOR_ID_RGB>;
-					function = LED_FUNCTION_INDICATOR;
-					function-enumerator = <2>;
-				};
-
-				multi-led@1 {
-					reg = <0x1>;
-					color = <LED_COLOR_ID_RGB>;
-					function = LED_FUNCTION_INDICATOR;
-					function-enumerator = <1>;
-				};
-
-				multi-led@2 {
-					reg = <0x2>;
-					color = <LED_COLOR_ID_RGB>;
-					function = LED_FUNCTION_WLAN;
-					function-enumerator = <3>;
-				};
-
-				multi-led@3 {
-					reg = <0x3>;
-					color = <LED_COLOR_ID_RGB>;
-					function = LED_FUNCTION_WLAN;
-					function-enumerator = <2>;
-				};
-
-				multi-led@4 {
-					reg = <0x4>;
-					color = <LED_COLOR_ID_RGB>;
-					function = LED_FUNCTION_WLAN;
-					function-enumerator = <1>;
-				};
-
-				multi-led@5 {
-					reg = <0x5>;
-					color = <LED_COLOR_ID_RGB>;
-					function = LED_FUNCTION_WAN;
-				};
-
-				multi-led@6 {
-					reg = <0x6>;
-					color = <LED_COLOR_ID_RGB>;
-					function = LED_FUNCTION_LAN;
-					function-enumerator = <4>;
-				};
-
-				multi-led@7 {
-					reg = <0x7>;
-					color = <LED_COLOR_ID_RGB>;
-					function = LED_FUNCTION_LAN;
-					function-enumerator = <3>;
-				};
-
-				multi-led@8 {
-					reg = <0x8>;
-					color = <LED_COLOR_ID_RGB>;
-					function = LED_FUNCTION_LAN;
-					function-enumerator = <2>;
-				};
-
-				multi-led@9 {
-					reg = <0x9>;
-					color = <LED_COLOR_ID_RGB>;
-					function = LED_FUNCTION_LAN;
-					function-enumerator = <1>;
-				};
-
-				multi-led@a {
-					reg = <0xa>;
-					color = <LED_COLOR_ID_RGB>;
-					function = LED_FUNCTION_LAN;
-					function-enumerator = <0>;
-				};
-
-				multi-led@b {
-					reg = <0xb>;
-					color = <LED_COLOR_ID_RGB>;
-					function = LED_FUNCTION_POWER;
-				};
-			};
-
-			eeprom@54 {
-				compatible = "atmel,24c64";
-				reg = <0x54>;
-
-				/* The EEPROM contains data for bootloader.
-				 * Contents:
-				 * 	struct omnia_eeprom {
-				 * 		u32 magic; (=0x0341a034 in LE)
-				 *		u32 ramsize; (in GiB)
-				 * 		char regdomain[4];
-				 * 		u32 crc32;
-				 * 	};
-				 */
-			};
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			/* routed to PCIe0/mSATA connector (CN7A) */
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			/* routed to PCIe1/USB2 connector (CN61A) */
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			/* routed to PCIe2 connector (CN62A) */
-		};
-
-		sfp_i2c: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			/* routed to SFP+ */
-		};
-
-		i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			/* ATSHA204A-MAHDA-T crypto module */
-			crypto@64 {
-				compatible = "atmel,atsha204a";
-				reg = <0x64>;
-			};
-		};
-
-		i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			/* exposed on pin header */
-		};
-
-		i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			pcawan: gpio@71 {
-				/*
-				 * GPIO expander for SFP+ signals and
-				 * and phy irq
-				 */
-				compatible = "nxp,pca9538";
-				reg = <0x71>;
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&pcawan_pins>;
-
-				interrupt-parent = <&gpio1>;
-				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-	};
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		marvell,reg-init = <3 18 0 0x4985>,
-				   <3 16 0xfff0 0x0001>;
-
-		/* irq is connected to &pcawan pin 7 */
-	};
-
-	/* Switch MV88E6176 at address 0x10 */
-	switch@10 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&swint_pins>;
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dsa,member = <0 0>;
-		reg = <0x10>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ports@0 {
-				reg = <0>;
-				label = "lan0";
-			};
-
-			ports@1 {
-				reg = <1>;
-				label = "lan1";
-			};
-
-			ports@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			ports@3 {
-				reg = <3>;
-				label = "lan3";
-			};
-
-			ports@4 {
-				reg = <4>;
-				label = "lan4";
-			};
-
-			ports@5 {
-				reg = <5>;
-				ethernet = <&eth1>;
-				phy-mode = "rgmii-id";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			ports@6 {
-				reg = <6>;
-				ethernet = <&eth0>;
-				phy-mode = "rgmii-id";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&pinctrl {
-	pcawan_pins: pcawan-pins {
-		marvell,pins = "mpp46";
-		marvell,function = "gpio";
-	};
-
-	swint_pins: swint-pins {
-		marvell,pins = "mpp45";
-		marvell,function = "gpio";
-	};
-
-	spi0cs0_pins: spi0cs0-pins {
-		marvell,pins = "mpp25";
-		marvell,function = "spi0";
-	};
-
-	spi0cs2_pins: spi0cs2-pins {
-		marvell,pins = "mpp26";
-		marvell,function = "spi0";
-	};
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "spansion,s25fl164k", "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x00100000>;
-				label = "U-Boot";
-			};
-
-			partition@100000 {
-				reg = <0x00100000 0x00700000>;
-				label = "Rescue system";
-			};
-		};
-	};
-
-	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
-};
-
-&uart0 {
-	/* Pin header CN10 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	/* Pin header CN11 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
deleted file mode 100644
index be8d607c59b21..0000000000000
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ /dev/null
@@ -1,185 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 385 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 385 family SoC";
-	compatible = "marvell,armada385", "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	soc {
-		pciec: pcie {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
-
-			/*
-			 * This port can be either x4 or x1. When
-			 * configured in x4 by the bootloader, then
-			 * pcie@4,0 is not available.
-			 */
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
-						<0 0 0 2 &pcie1_intc 1>,
-						<0 0 0 3 &pcie1_intc 2>,
-						<0 0 0 4 &pcie1_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			/* x1 port */
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
-						<0 0 0 2 &pcie2_intc 1>,
-						<0 0 0 3 &pcie2_intc 2>,
-						<0 0 0 4 &pcie2_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-				pcie2_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			/* x1 port */
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
-						<0 0 0 2 &pcie3_intc 1>,
-						<0 0 0 3 &pcie3_intc 2>,
-						<0 0 0 4 &pcie3_intc 3>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-				pcie3_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			/*
-			 * x1 port only available when pcie@1,0 is
-			 * configured as a x1 port
-			 */
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
-						<0 0 0 2 &pcie4_intc 1>,
-						<0 0 0 3 &pcie4_intc 2>,
-						<0 0 0 4 &pcie4_intc 3>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-				pcie4_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv88f6820-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts
deleted file mode 100644
index f7daa3bc707ef..0000000000000
--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828)
- *
- *  Copyright (C) 2015 Russell King
- */
-
-/dts-v1/;
-#include "armada-388-clearfog.dtsi"
-
-/ {
-	model = "SolidRun Clearfog Base A1";
-	compatible = "solidrun,clearfog-base-a1",
-		"solidrun,clearfog-a1", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&rear_button_pins>;
-		pinctrl-names = "default";
-
-		button-0 {
-			/* The rear SW3 button */
-			label = "Rear Button";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-			linux,can-disable;
-			linux,code = <BTN_0>;
-		};
-	};
-};
-
-&eth1 {
-	phy = <&phy1>;
-};
-
-&gpio0 {
-	phy1_reset {
-		gpio-hog;
-		gpios = <19 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "phy1-reset";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins &clearfog_phy_pins>;
-	phy1: ethernet-phy@1 {
-		/*
-		 * Annoyingly, the marvell phy driver configures the LED
-		 * register, rather than preserving reset-loaded setting.
-		 * We undo that rubbish here.
-		 */
-		marvell,reg-init = <3 16 0 0x101e>;
-		reg = <1>;
-	};
-};
-
-&pinctrl {
-	/* phy1 reset */
-	clearfog_phy_pins: clearfog-phy-pins {
-		marvell,pins = "mpp19";
-		marvell,function = "gpio";
-	};
-	rear_button_pins: rear-button-pins {
-		marvell,pins = "mpp44";
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/armada-388-clearfog-pro.dts
deleted file mode 100644
index ff890c09c3ede..0000000000000
--- a/arch/arm/boot/dts/armada-388-clearfog-pro.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
- *
- *  Copyright (C) 2015 Russell King
- */
-#include "armada-388-clearfog.dts"
-
-/ {
-	model = "SolidRun Clearfog Pro A1";
-	compatible = "solidrun,clearfog-pro-a1",
-		"solidrun,clearfog-a1", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
-};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
deleted file mode 100644
index 95299167dcf58..0000000000000
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
- *
- *  Copyright (C) 2015 Russell King
- */
-
-/dts-v1/;
-#include "armada-388-clearfog.dtsi"
-
-/ {
-	model = "SolidRun Clearfog A1";
-	compatible = "solidrun,clearfog-a1", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
-
-	soc {
-		internal-regs {
-			usb3@f0000 {
-				/* CON2, nearest CPU, USB2 only. */
-				status = "okay";
-			};
-		};
-
-		pcie {
-			pcie@3,0 {
-				/* Port 2, Lane 0. CON2, nearest CPU. */
-				reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
-				status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&rear_button_pins>;
-		pinctrl-names = "default";
-
-		button-0 {
-			/* The rear SW3 button */
-			label = "Rear Button";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			linux,can-disable;
-			linux,code = <BTN_0>;
-		};
-	};
-};
-
-&eth1 {
-	/* ethernet@30000 */
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&expander0 {
-	/*
-	 * PCA9655 GPIO expander:
-	 *  0-CON3 CLKREQ#
-	 *  1-CON3 PERST#
-	 *  2-CON2 PERST#
-	 *  3-CON3 W_DISABLE
-	 *  4-CON2 CLKREQ#
-	 *  5-USB3 overcurrent
-	 *  6-USB3 power
-	 *  7-CON2 W_DISABLE
-	 *  8-JP4 P1
-	 *  9-JP4 P4
-	 * 10-JP4 P5
-	 * 11-m.2 DEVSLP
-	 * 12-SFP_LOS
-	 * 13-SFP_TX_FAULT
-	 * 14-SFP_TX_DISABLE
-	 * 15-SFP_MOD_DEF0
-	 */
-	pcie2-0-clkreq-hog {
-		gpio-hog;
-		gpios = <4 GPIO_ACTIVE_LOW>;
-		input;
-		line-name = "pcie2.0-clkreq";
-	};
-	pcie2-0-w-disable-hog {
-		gpio-hog;
-		gpios = <7 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "pcie2.0-w-disable";
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	switch@4 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <4>;
-		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
-		pinctrl-names = "default";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan5";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan4";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan2";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan1";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-				ethernet = <&eth1>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			port@6 {
-				/* 88E1512 external phy */
-				reg = <6>;
-				label = "lan6";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&pinctrl {
-	clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
-		marvell,pins = "mpp46";
-		marvell,function = "ref";
-	};
-	clearfog_dsa0_pins: clearfog-dsa0-pins {
-		marvell,pins = "mpp23", "mpp41";
-		marvell,function = "gpio";
-	};
-	clearfog_spi1_cs_pins: spi1-cs-pins {
-		marvell,pins = "mpp55";
-		marvell,function = "spi1";
-	};
-	rear_button_pins: rear-button-pins {
-		marvell,pins = "mpp34";
-		marvell,function = "gpio";
-	};
-};
-
-&spi1 {
-	/*
-	 * Add SPI CS pins for clearfog:
-	 * CS0: W25Q32
-	 * CS1:
-	 * CS2: mikrobus
-	 */
-	pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
-};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
deleted file mode 100644
index f8a06ae4a3c91..0000000000000
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ /dev/null
@@ -1,245 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree include file for SolidRun Clearfog 88F6828 based boards
- *
- *  Copyright (C) 2015 Russell King
- */
-
-#include "armada-388.dtsi"
-#include "armada-38x-solidrun-microsom.dtsi"
-
-/ {
-	aliases {
-		/* So that mvebu u-boot can update the MAC addresses */
-		ethernet1 = &eth0;
-		ethernet2 = &eth1;
-		ethernet3 = &eth2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	soc {
-		internal-regs {
-			sata@a8000 {
-				/* pinctrl? */
-				status = "okay";
-			};
-
-			sata@e0000 {
-				/* pinctrl? */
-				status = "okay";
-			};
-
-			sdhci@d8000 {
-				bus-width = <4>;
-				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-				no-1-8-v;
-				pinctrl-0 = <&microsom_sdhci_pins
-					     &clearfog_sdhci_cd_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				vmmc-supply = <&reg_3p3v>;
-				wp-inverted;
-			};
-
-			usb@58000 {
-				/* CON3, nearest  power. */
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				/* CON7 */
-				status = "okay";
-			};
-		};
-
-		pcie {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * the mini-PCIe connectors on the board.
-			 */
-			pcie@2,0 {
-				/* Port 1, Lane 0. CON3, nearest power. */
-				reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
-				status = "okay";
-			};
-		};
-	};
-
-	sfp: sfp {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
-		maximum-power-milliwatt = <2000>;
-	};
-};
-
-&eth1 {
-	/* ethernet@30000 */
-	bm,pool-long = <2>;
-	bm,pool-short = <1>;
-	buffer-manager = <&bm>;
-	phys = <&comphy1 1>;
-	phy-mode = "sgmii";
-	status = "okay";
-};
-
-&eth2 {
-	/* ethernet@34000 */
-	bm,pool-long = <3>;
-	bm,pool-short = <1>;
-	buffer-manager = <&bm>;
-	managed = "in-band-status";
-	phys = <&comphy5 2>;
-	phy-mode = "sgmii";
-	sfp = <&sfp>;
-	status = "okay";
-};
-
-&i2c0 {
-	/*
-	 * PCA9655 GPIO expander, up to 1MHz clock.
-	 *  0-CON3 CLKREQ#
-	 *  1-CON3 PERST#
-	 *  2-
-	 *  3-CON3 W_DISABLE
-	 *  4-
-	 *  5-USB3 overcurrent
-	 *  6-USB3 power
-	 *  7-
-	 *  8-JP4 P1
-	 *  9-JP4 P4
-	 * 10-JP4 P5
-	 * 11-m.2 DEVSLP
-	 * 12-SFP_LOS
-	 * 13-SFP_TX_FAULT
-	 * 14-SFP_TX_DISABLE
-	 * 15-SFP_MOD_DEF0
-	 */
-	expander0: gpio-expander@20 {
-		/*
-		 * This is how it should be:
-		 * compatible = "onnn,pca9655", "nxp,pca9555";
-		 * but you can't do this because of the way I2C works.
-		 */
-		compatible = "nxp,pca9555";
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0x20>;
-
-		pcie1-0-clkreq-hog {
-			gpio-hog;
-			gpios = <0 GPIO_ACTIVE_LOW>;
-			input;
-			line-name = "pcie1.0-clkreq";
-		};
-		pcie1-0-w-disable-hog {
-			gpio-hog;
-			gpios = <3 GPIO_ACTIVE_LOW>;
-			output-low;
-			line-name = "pcie1.0-w-disable";
-		};
-		usb3-ilimit-hog {
-			gpio-hog;
-			gpios = <5 GPIO_ACTIVE_LOW>;
-			input;
-			line-name = "usb3-current-limit";
-		};
-		usb3-power-hog {
-			gpio-hog;
-			gpios = <6 GPIO_ACTIVE_HIGH>;
-			output-high;
-			line-name = "usb3-power";
-		};
-		m2-devslp-hog {
-			gpio-hog;
-			gpios = <11 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "m.2 devslp";
-		};
-	};
-
-	/* The MCP3021 supports standard and fast modes */
-	mikrobus_adc: mcp3021@4c {
-		compatible = "microchip,mcp3021";
-		reg = <0x4c>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-};
-
-&i2c1 {
-	/*
-	 * Routed to SFP, mikrobus, and PCIe.
-	 * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with
-	 *  address pins tied low, which takes addresses 0x50 and 0x51.
-	 * Mikrobus doesn't specify beyond an I2C bus being present.
-	 * PCIe uses ARP to assign addresses, or 0x63-0x64.
-	 */
-	clock-frequency = <100000>;
-	pinctrl-0 = <&clearfog_i2c1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&pinctrl {
-	clearfog_i2c1_pins: i2c1-pins {
-		/* SFP, PCIe, mSATA, mikrobus */
-		marvell,pins = "mpp26", "mpp27";
-		marvell,function = "i2c1";
-	};
-	clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
-		marvell,pins = "mpp20";
-		marvell,function = "gpio";
-	};
-	mikro_pins: mikro-pins {
-		/* int: mpp22 rst: mpp29 */
-		marvell,pins = "mpp22", "mpp29";
-		marvell,function = "gpio";
-	};
-	mikro_spi_pins: mikro-spi-pins {
-		marvell,pins = "mpp43";
-		marvell,function = "spi1";
-	};
-	mikro_uart_pins: mikro-uart-pins {
-		marvell,pins = "mpp24", "mpp25";
-		marvell,function = "ua1";
-	};
-};
-
-&spi1 {
-	/*
-	 * Add SPI CS pins for clearfog:
-	 * CS0: W25Q32
-	 * CS1: PIC microcontroller (Pro models)
-	 * CS2: mikrobus
-	 */
-	pinctrl-0 = <&spi1_pins &mikro_spi_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart1 {
-	/* mikrobus uart */
-	pinctrl-0 = <&mikro_uart_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
deleted file mode 100644
index 45cc784659fd6..0000000000000
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ /dev/null
@@ -1,245 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada 388 evaluation board
- * (DB-88F6820)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-/dts-v1/;
-#include "armada-388.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Development Board";
-	compatible = "marvell,a385-db", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-				audio_codec: audio-codec@4a {
-					#sound-dai-cells = <0>;
-					compatible = "cirrus,cs42l51";
-					reg = <0x4a>;
-				};
-			};
-
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-				bm,pool-short = <3>;
-			};
-
-			usb@58000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-				bm,pool-short = <1>;
-			};
-
-			mdio@72004 {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			sata@e0000 {
-				status = "okay";
-			};
-
-			bm@c8000 {
-				status = "okay";
-			};
-
-			sdhci@d8000 {
-				broken-cd;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-				no-1-8-v;
-			};
-
-			audio-controller@e8000 {
-				pinctrl-0 = <&i2s_pins>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-
-		pcie {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Armada 385 DB Audio";
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Headphone", "Out Jack",
-			"Line", "In Jack";
-		simple-audio-card,routing =
-			"Out Jack", "HPL",
-			"Out Jack", "HPR",
-			"AIN1L", "In Jack",
-			"AIN1R", "In Jack";
-		status = "disabled";
-
-		simple-audio-card,dai-link@0 {
-			format = "i2s";
-			cpu {
-				sound-dai = <&audio_controller 0>;
-			};
-
-			codec {
-				sound-dai = <&audio_codec>;
-			};
-		};
-
-		simple-audio-card,dai-link@1 {
-			format = "i2s";
-			cpu {
-				sound-dai = <&audio_controller 1>;
-			};
-
-			codec {
-				sound-dai = <&spdif_out>;
-			};
-		};
-
-		simple-audio-card,dai-link@2 {
-			format = "i2s";
-			cpu {
-				sound-dai = <&audio_controller 1>;
-			};
-
-			codec {
-				sound-dai = <&spdif_in>;
-			};
-		};
-	};
-
-	spdif_out: spdif-out {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dit";
-	};
-
-	spdif_in: spdif-in {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dir";
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "w25q32", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x800000>;
-			};
-			partition@800000 {
-				label = "Linux";
-				reg = <0x800000 0x800000>;
-			};
-			partition@1000000 {
-				label = "Filesystem";
-				reg = <0x1000000 0x3f000000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
deleted file mode 100644
index e2ba50520b6b0..0000000000000
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ /dev/null
@@ -1,406 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for Marvell Armada 385 development board
- * (RD-88F6820-GP)
- *
- * Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- */
-
-/dts-v1/;
-#include "armada-388.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Marvell Armada 388 DB-88F6820-GP";
-	compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins>;
-				status = "okay";
-				clock-frequency = <100000>;
-
-				expander0: pca9555@20 {
-					compatible = "nxp,pca9555";
-					pinctrl-names = "default";
-					pinctrl-0 = <&pca0_pins>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					reg = <0x20>;
-				};
-
-				expander1: pca9555@21 {
-					compatible = "nxp,pca9555";
-					pinctrl-names = "default";
-					interrupt-parent = <&gpio0>;
-					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					reg = <0x21>;
-				};
-
-				eeprom@57 {
-					compatible = "atmel,24c64";
-					reg = <0x57>;
-				};
-			};
-
-			serial@12000 {
-				/*
-				 * Exported on the micro USB connector CON16
-				 * through an FTDI
-				 */
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart0_pins>;
-				status = "okay";
-			};
-
-			/* GE1 CON15 */
-			ethernet@30000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-				bm,pool-short = <3>;
-			};
-
-			/* CON4 */
-			usb@58000 {
-				vcc-supply = <&reg_usb2_0_vbus>;
-				status = "okay";
-			};
-
-			/* GE0 CON1 */
-			ethernet@70000 {
-				pinctrl-names = "default";
-				/*
-				 * The Reference Clock 0 is used to provide a
-				 * clock to the PHY
-				 */
-				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-				bm,pool-short = <1>;
-			};
-
-
-			mdio@72004 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&mdio_pins>;
-
-				phy0: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy1: ethernet-phy@0 {
-					reg = <0>;
-				};
-			};
-
-			sata@a8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&sata0_pins>, <&sata1_pins>;
-				status = "okay";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				sata0: sata-port@0 {
-					reg = <0>;
-					target-supply = <&reg_5v_sata0>;
-				};
-
-				sata1: sata-port@1 {
-					reg = <1>;
-					target-supply = <&reg_5v_sata1>;
-				};
-			};
-
-			bm@c8000 {
-				status = "okay";
-			};
-
-			sata@e0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
-				status = "okay";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				sata2: sata-port@0 {
-					reg = <0>;
-					target-supply = <&reg_5v_sata2>;
-				};
-
-				sata3: sata-port@1 {
-					reg = <1>;
-					target-supply = <&reg_5v_sata3>;
-				};
-			};
-
-			sdhci@d8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdhci_pins>;
-				no-1-8-v;
-				/*
-				 * A388-GP board v1.5 and higher replace
-				 * hitherto card detection method based on GPIO
-				 * with the one using DAT3 pin. As they are
-				 * incompatible, software-based polling is
-				 * enabled with 'broken-cd' property. For boards
-				 * older than v1.5 it can be replaced with:
-				 * 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;',
-				 * whereas for the newer ones following can be
-				 * used instead:
-				 * 'dat3-cd;'
-				 * 'cd-inverted;'
-				 */
-				broken-cd;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-			};
-
-			/* CON5 */
-			usb3@f0000 {
-				usb-phy = <&usb2_1_phy>;
-				status = "okay";
-			};
-
-			/* CON7 */
-			usb3@f8000 {
-				usb-phy = <&usb3_phy>;
-				status = "okay";
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-
-		pcie {
-			status = "okay";
-			/*
-			 * One PCIe units is accessible through
-			 * standard PCIe slot on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/*
-			 * The two other PCIe units are accessible
-			 * through mini PCIe slot on the board.
-			 */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-			pcie@3,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		gpio-fan {
-			compatible = "gpio-fan";
-			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <	 0 0
-					      3000 1>;
-		};
-	};
-
-	usb2_1_phy: usb2_1_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_usb2_1_vbus>;
-		#phy-cells = <0>;
-	};
-
-	usb3_phy: usb3_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_usb3_vbus>;
-		#phy-cells = <0>;
-	};
-
-	reg_usb3_vbus: usb3-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb3-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usb2_0_vbus: v5-vbus0 {
-		compatible = "regulator-fixed";
-		regulator-name = "v5.0-vbus0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usb2_1_vbus: v5-vbus1 {
-		compatible = "regulator-fixed";
-		regulator-name = "v5.0-vbus1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_sata0: pwr-sata0 {
-		compatible = "regulator-fixed";
-		regulator-name = "pwr_en_sata0";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		enable-active-high;
-		regulator-boot-on;
-		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_5v_sata0: v5-sata0 {
-		compatible = "regulator-fixed";
-		regulator-name = "v5.0-sata0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_sata0>;
-	};
-
-	reg_12v_sata0: v12-sata0 {
-		compatible = "regulator-fixed";
-		regulator-name = "v12.0-sata0";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		vin-supply = <&reg_sata0>;
-	};
-
-	reg_sata1: pwr-sata1 {
-		regulator-name = "pwr_en_sata1";
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		enable-active-high;
-		regulator-boot-on;
-		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_5v_sata1: v5-sata1 {
-		compatible = "regulator-fixed";
-		regulator-name = "v5.0-sata1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_sata1>;
-	};
-
-	reg_12v_sata1: v12-sata1 {
-		compatible = "regulator-fixed";
-		regulator-name = "v12.0-sata1";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		vin-supply = <&reg_sata1>;
-	};
-
-	reg_sata2: pwr-sata2 {
-		compatible = "regulator-fixed";
-		regulator-name = "pwr_en_sata2";
-		enable-active-high;
-		regulator-boot-on;
-		gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_5v_sata2: v5-sata2 {
-		compatible = "regulator-fixed";
-		regulator-name = "v5.0-sata2";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_sata2>;
-	};
-
-	reg_12v_sata2: v12-sata2 {
-		compatible = "regulator-fixed";
-		regulator-name = "v12.0-sata2";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		vin-supply = <&reg_sata2>;
-	};
-
-	reg_sata3: pwr-sata3 {
-		compatible = "regulator-fixed";
-		regulator-name = "pwr_en_sata3";
-		enable-active-high;
-		regulator-boot-on;
-		gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_5v_sata3: v5-sata3 {
-		compatible = "regulator-fixed";
-		regulator-name = "v5.0-sata3";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_sata3>;
-	};
-
-	reg_12v_sata3: v12-sata3 {
-		compatible = "regulator-fixed";
-		regulator-name = "v12.0-sata3";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		vin-supply = <&reg_sata3>;
-	};
-};
-
-&pinctrl {
-	pca0_pins: pca0_pins {
-		marvell,pins = "mpp18";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p128", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <50000000>;
-		m25p,fast-read;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
deleted file mode 100644
index ec134e22bae3e..0000000000000
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ /dev/null
@@ -1,324 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for Helios4
- * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828)
- *
- *  Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io>
- *
- */
-
-/dts-v1/;
-#include "armada-388.dtsi"
-#include "armada-38x-solidrun-microsom.dtsi"
-
-/ {
-	model = "Helios4";
-	compatible = "kobol,helios4", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2 GB */
-	};
-
-	aliases {
-		/* So that mvebu u-boot can update the MAC addresses */
-		ethernet1 = &eth0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reg_12v: regulator-12v {
-		compatible = "regulator-fixed";
-		regulator-name = "power_brick_12V";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&reg_12v>;
-	};
-
-	reg_5p0v_hdd: regulator-5v-hdd {
-		compatible = "regulator-fixed";
-		regulator-name = "5V_HDD";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&reg_12v>;
-	};
-
-	reg_5p0v_usb: regulator-5v-usb {
-		compatible = "regulator-fixed";
-		regulator-name = "USB-PWR";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-		enable-active-high;
-		gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
-		vin-supply = <&reg_12v>;
-	};
-
-	system-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&helios_system_led_pins>;
-
-		status-led {
-			label = "helios4:green:status";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-			default-state = "on";
-		};
-
-		fault-led {
-			label = "helios4:red:fault";
-			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-	};
-
-	io-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&helios_io_led_pins>;
-
-		sata1-led {
-			label = "helios4:green:ata1";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ata1";
-			default-state = "off";
-		};
-		sata2-led {
-			label = "helios4:green:ata2";
-			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ata2";
-			default-state = "off";
-		};
-		sata3-led {
-			label = "helios4:green:ata3";
-			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ata3";
-			default-state = "off";
-		};
-		sata4-led {
-			label = "helios4:green:ata4";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ata4";
-			default-state = "off";
-		};
-		usb-led {
-			label = "helios4:green:usb";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "usb-host";
-			default-state = "off";
-		};
-	};
-
-	fan1: j10-pwm {
-		compatible = "pwm-fan";
-		pwms = <&gpio1 9 40000>;	/* Target freq:25 kHz */
-		pinctrl-names = "default";
-		pinctrl-0 = <&helios_fan1_pins>;
-	};
-
-	fan2: j17-pwm {
-		compatible = "pwm-fan";
-		pwms = <&gpio1 23 40000>;	/* Target freq:25 kHz */
-		pinctrl-names = "default";
-		pinctrl-0 = <&helios_fan2_pins>;
-	};
-
-	usb2_phy: usb2-phy {
-		compatible = "usb-nop-xceiv";
-		vbus-regulator = <&reg_5p0v_usb>;
-	};
-
-	usb3_phy: usb3-phy {
-		compatible = "usb-nop-xceiv";
-	};
-
-	soc {
-		internal-regs {
-			i2c@11000 {
-				/*
-				 * PCA9655 GPIO expander, up to 1MHz clock.
-				 *  0-Board Revision bit 0 #
-				 *  1-Board Revision bit 1 #
-				 *  5-USB3 overcurrent
-				 *  6-USB3 power
-				 */
-				expander0: gpio-expander@20 {
-					/*
-					 * This is how it should be:
-					 * compatible = "onnn,pca9655",
-					 *	 "nxp,pca9555";
-					 * but you can't do this because of
-					 * the way I2C works.
-					 */
-					compatible = "nxp,pca9555";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x20>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pca0_pins>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-
-					board-rev-bit-0-hog {
-						gpio-hog;
-						gpios = <0 GPIO_ACTIVE_LOW>;
-						input;
-						line-name = "board-rev-0";
-					};
-					board-rev-bit-1-hog {
-						gpio-hog;
-						gpios = <1 GPIO_ACTIVE_LOW>;
-						input;
-						line-name = "board-rev-1";
-					};
-					usb3-ilimit-hog {
-						gpio-hog;
-						gpios = <5 GPIO_ACTIVE_HIGH>;
-						input;
-						line-name = "usb-overcurrent-status";
-					};
-				};
-
-				temp_sensor: temp@4c {
-					compatible = "ti,lm75";
-					reg = <0x4c>;
-					vcc-supply = <&reg_3p3v>;
-				};
-			};
-
-			i2c@11100 {
-				/*
-				 * External I2C Bus for user peripheral
-				 */
-				clock-frequency = <400000>;
-				pinctrl-0 = <&helios_i2c1_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			sata@a8000 {
-				status = "okay";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				sata0: sata-port@0 {
-					reg = <0>;
-				};
-
-				sata1: sata-port@1 {
-					reg = <1>;
-				};
-			};
-
-			sata@e0000 {
-				status = "okay";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				sata2: sata-port@0 {
-					reg = <0>;
-				};
-
-				sata3: sata-port@1 {
-					reg = <1>;
-				};
-			};
-
-			spi@10680 {
-				pinctrl-0 = <&spi1_pins
-					     &microsom_spi1_cs_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			sdhci@d8000 {
-				bus-width = <4>;
-				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-				no-1-8-v;
-				pinctrl-0 = <&helios_sdhci_pins
-					     &helios_sdhci_cd_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				vmmc = <&reg_3p3v>;
-				wp-inverted;
-			};
-
-			usb@58000 {
-				usb-phy = <&usb2_phy>;
-				status = "okay";
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-
-			pinctrl@18000 {
-				pca0_pins: pca0-pins {
-					marvell,pins = "mpp23";
-					marvell,function = "gpio";
-				};
-				microsom_phy0_int_pins: microsom-phy0-int-pins {
-					marvell,pins = "mpp18";
-					marvell,function = "gpio";
-				};
-				helios_i2c1_pins: i2c1-pins {
-					marvell,pins = "mpp26", "mpp27";
-					marvell,function = "i2c1";
-				};
-				helios_sdhci_cd_pins: helios-sdhci-cd-pins {
-					marvell,pins = "mpp20";
-					marvell,function = "gpio";
-				};
-				helios_sdhci_pins: helios-sdhci-pins {
-					marvell,pins = "mpp21", "mpp28",
-						       "mpp37", "mpp38",
-						       "mpp39", "mpp40";
-					marvell,function = "sd0";
-				};
-				helios_system_led_pins: helios-system-led-pins {
-					marvell,pins = "mpp24", "mpp25";
-					marvell,function = "gpio";
-				};
-				helios_io_led_pins: helios-io-led-pins {
-					marvell,pins = "mpp49", "mpp50",
-						       "mpp52", "mpp53",
-						       "mpp54";
-					marvell,function = "gpio";
-				};
-				helios_fan1_pins: helios_fan1_pins {
-					marvell,pins = "mpp41", "mpp43";
-					marvell,function = "gpio";
-				};
-				helios_fan2_pins: helios_fan2_pins {
-					marvell,pins = "mpp48", "mpp55";
-					marvell,function = "gpio";
-				};
-				microsom_spi1_cs_pins: spi1-cs-pins {
-					marvell,pins = "mpp59";
-					marvell,function = "spi1";
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
deleted file mode 100644
index c0efafd45b338..0000000000000
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada 388 Reference Design board
- * (RD-88F6820-AP)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-/dts-v1/;
-#include "armada-388.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Reference Design";
-	compatible = "marvell,a385-rd", "marvell,armada388",
-		"marvell,armada385","marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
-
-		internal-regs {
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			sdhci@d8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdhci_pins>;
-				broken-cd;
-				no-1-8-v;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-
-			mdio@72004 {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-		};
-
-		pcie {
-			status = "okay";
-			/*
-			 * One PCIe units is accessible through
-			 * standard PCIe slot on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p128", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/armada-388.dtsi
deleted file mode 100644
index f3a020ff577e3..0000000000000
--- a/arch/arm/boot/dts/armada-388.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 388 SoC.
- *
- * Copyright (C) 2015 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * The main difference with the Armada 385 is that the 388 can handle two more
- * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl
- * property and the name of the SoC, and add the second SATA host which control
- * the 2 other ports.
- */
-
-#include "armada-385.dtsi"
-
-/ {
-	model = "Marvell Armada 388 family SoC";
-	compatible = "marvell,armada388", "marvell,armada385",
-		"marvell,armada380";
-	soc {
-		internal-regs {
-			sata@e0000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xe0000 0x2000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 30>;
-				status = "disabled";
-			};
-
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv88f6828-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
deleted file mode 100644
index 2c64bc6e5a170..0000000000000
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for SolidRun Armada 38x Microsom
- *
- *  Copyright (C) 2015 Russell King
- */
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-			rtc@a3800 {
-				/*
-				 * If the rtc doesn't work, run "date reset"
-				 * twice in u-boot.
-				 */
-				status = "okay";
-			};
-		};
-	};
-};
-
-&bm {
-	status = "okay";
-};
-
-&bm_bppi {
-	status = "okay";
-};
-
-&eth0 {
-	/* ethernet@70000 */
-	pinctrl-0 = <&ge0_rgmii_pins>;
-	pinctrl-names = "default";
-	phy = <&phy_dedicated>;
-	phy-mode = "rgmii-id";
-	buffer-manager = <&bm>;
-	bm,pool-long = <0>;
-	bm,pool-short = <1>;
-	status = "okay";
-};
-
-&mdio {
-	/*
-	 * Add the phy clock here, so the phy can be accessed to read its
-	 * IDs prior to binding with the driver.
-	 */
-	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
-	pinctrl-names = "default";
-
-	phy_dedicated: ethernet-phy@0 {
-		/*
-		 * Annoyingly, the marvell phy driver configures the LED
-		 * register, rather than preserving reset-loaded setting.
-		 * We undo that rubbish here.
-		 */
-		marvell,reg-init = <3 16 0 0x101e>;
-		reg = <0>;
-	};
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-};
-
-&pinctrl {
-	microsom_phy_clk_pins: microsom-phy-clk-pins {
-		marvell,pins = "mpp45";
-		marvell,function = "ref";
-	};
-	/* Optional eMMC */
-	microsom_sdhci_pins: microsom-sdhci-pins {
-		marvell,pins = "mpp21", "mpp28", "mpp37",
-			       "mpp38", "mpp39", "mpp40";
-		marvell,function = "sd0";
-	};
-};
-
-&spi1 {
-	/* The microsom has an optional W25Q32 on board, connected to CS0 */
-	pinctrl-0 = <&spi1_pins>;
-
-	w25q32: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "w25q32", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <3000000>;
-	};
-};
-
-&uart0 {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
deleted file mode 100644
index 446861b6b17b2..0000000000000
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ /dev/null
@@ -1,733 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 38x family of SoCs.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	model = "Marvell Armada 38x family SoC";
-	compatible = "marvell,armada380";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts-extended = <&mpic 3>;
-	};
-
-	soc {
-		compatible = "marvell,armada380-mbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		interrupt-parent = <&gic>;
-		pcie-mem-aperture = <0xe0000000 0x8000000>;
-		pcie-io-aperture  = <0xe8000000 0x100000>;
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
-		};
-
-		devbus_bootcs: devbus-bootcs {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs0: devbus-cs0 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs1: devbus-cs1 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs2: devbus-cs2 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs3: devbus-cs3 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			sdramc: sdramc@1400 {
-				compatible = "marvell,armada-xp-sdram-controller";
-				reg = <0x1400 0x500>;
-			};
-
-			L2: cache-controller@8000 {
-				compatible = "arm,pl310-cache";
-				reg = <0x8000 0x1000>;
-				cache-unified;
-				cache-level = <2>;
-				arm,double-linefill-incr = <0>;
-				arm,double-linefill-wrap = <0>;
-				arm,double-linefill = <0>;
-				prefetch-data = <1>;
-			};
-
-			scu@c000 {
-				compatible = "arm,cortex-a9-scu";
-				reg = <0xc000 0x58>;
-			};
-
-			timer@c200 {
-				compatible = "arm,cortex-a9-global-timer";
-				reg = <0xc200 0x20>;
-				interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
-				clocks = <&coreclk 2>;
-			};
-
-			timer@c600 {
-				compatible = "arm,cortex-a9-twd-timer";
-				reg = <0xc600 0x20>;
-				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
-				clocks = <&coreclk 2>;
-			};
-
-			gic: interrupt-controller@d000 {
-				compatible = "arm,cortex-a9-gic";
-				#interrupt-cells = <3>;
-				#size-cells = <0>;
-				interrupt-controller;
-				reg = <0xd000 0x1000>,
-				      <0xc100 0x100>;
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			uart0: serial@12000 {
-				compatible = "marvell,armada-38x-uart", "ns16550a";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			uart1: serial@12100 {
-				compatible = "marvell,armada-38x-uart", "ns16550a";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			pinctrl: pinctrl@18000 {
-				reg = <0x18000 0x20>;
-
-				ge0_rgmii_pins: ge-rgmii-pins-0 {
-					marvell,pins = "mpp6", "mpp7", "mpp8",
-						       "mpp9", "mpp10", "mpp11",
-						       "mpp12", "mpp13", "mpp14",
-						       "mpp15", "mpp16", "mpp17";
-					marvell,function = "ge0";
-				};
-
-				ge1_rgmii_pins: ge-rgmii-pins-1 {
-					marvell,pins = "mpp21", "mpp27", "mpp28",
-						       "mpp29", "mpp30", "mpp31",
-						       "mpp32", "mpp37", "mpp38",
-						       "mpp39", "mpp40", "mpp41";
-					marvell,function = "ge1";
-				};
-
-				i2c0_pins: i2c-pins-0 {
-					marvell,pins = "mpp2", "mpp3";
-					marvell,function = "i2c0";
-				};
-
-				mdio_pins: mdio-pins {
-					marvell,pins = "mpp4", "mpp5";
-					marvell,function = "ge";
-				};
-
-				ref_clk0_pins: ref-clk-pins-0 {
-					marvell,pins = "mpp45";
-					marvell,function = "ref";
-				};
-
-				ref_clk1_pins: ref-clk-pins-1 {
-					marvell,pins = "mpp46";
-					marvell,function = "ref";
-				};
-
-				spi0_pins: spi-pins-0 {
-					marvell,pins = "mpp22", "mpp23", "mpp24",
-						       "mpp25";
-					marvell,function = "spi0";
-				};
-
-				spi1_pins: spi-pins-1 {
-					marvell,pins = "mpp56", "mpp57", "mpp58",
-						       "mpp59";
-					marvell,function = "spi1";
-				};
-
-				nand_pins: nand-pins {
-					marvell,pins = "mpp22", "mpp34", "mpp23",
-						       "mpp33", "mpp38", "mpp28",
-						       "mpp40", "mpp42", "mpp35",
-						       "mpp36", "mpp25", "mpp30",
-						       "mpp32";
-					marvell,function = "dev";
-				};
-
-				nand_rb: nand-rb {
-					marvell,pins = "mpp41";
-					marvell,function = "nand";
-				};
-
-				uart0_pins: uart-pins-0 {
-					marvell,pins = "mpp0", "mpp1";
-					marvell,function = "ua0";
-				};
-
-				uart1_pins: uart-pins-1 {
-					marvell,pins = "mpp19", "mpp20";
-					marvell,function = "ua1";
-				};
-
-				sdhci_pins: sdhci-pins {
-					marvell,pins = "mpp48", "mpp49", "mpp50",
-						       "mpp52", "mpp53", "mpp54",
-						       "mpp55", "mpp57", "mpp58",
-						       "mpp59";
-					marvell,function = "sd0";
-				};
-
-				sata0_pins: sata-pins-0 {
-					marvell,pins = "mpp20";
-					marvell,function = "sata0";
-				};
-
-				sata1_pins: sata-pins-1 {
-					marvell,pins = "mpp19";
-					marvell,function = "sata1";
-				};
-
-				sata2_pins: sata-pins-2 {
-					marvell,pins = "mpp47";
-					marvell,function = "sata2";
-				};
-
-				sata3_pins: sata-pins-3 {
-					marvell,pins = "mpp44";
-					marvell,function = "sata3";
-				};
-
-				i2s_pins: i2s-pins {
-					marvell,pins = "mpp48", "mpp49",
-						       "mpp50", "mpp51",
-						       "mpp52", "mpp53";
-					marvell,function = "audio";
-				};
-
-				spdif_pins: spdif-pins {
-					marvell,pins = "mpp51";
-					marvell,function = "audio";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				gpio-ranges = <&pinctrl 0 0 32>;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <28>;
-				gpio-controller;
-				gpio-ranges = <&pinctrl 0 32 28>;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-			};
-
-			systemc: system-controller@18200 {
-				compatible = "marvell,armada-380-system-controller",
-					     "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-380-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			comphy: phy@18300 {
-				compatible = "marvell,armada-380-comphy";
-				reg-names = "comphy", "conf";
-				reg = <0x18300 0x100>, <0x18460 4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				comphy0: phy@0 {
-					reg = <0>;
-					#phy-cells = <1>;
-				};
-
-				comphy1: phy@1 {
-					reg = <1>;
-					#phy-cells = <1>;
-				};
-
-				comphy2: phy@2 {
-					reg = <2>;
-					#phy-cells = <1>;
-				};
-
-				comphy3: phy@3 {
-					reg = <3>;
-					#phy-cells = <1>;
-				};
-
-				comphy4: phy@4 {
-					reg = <4>;
-					#phy-cells = <1>;
-				};
-
-				comphy5: phy@5 {
-					reg = <5>;
-					#phy-cells = <1>;
-				};
-			};
-
-			coreclk: mvebu-sar@18600 {
-				compatible = "marvell,armada-380-core-clock";
-				reg = <0x18600 0x04>;
-				#clock-cells = <1>;
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>,
-				      <0x20250 0x8>;
-			};
-
-			mpic: interrupt-controller@20a00 {
-				compatible = "marvell,mpic";
-				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			timer: timer@20300 {
-				compatible = "marvell,armada-380-timer",
-					     "marvell,armada-xp-timer";
-				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-						      <&mpic 5>,
-						      <&mpic 6>;
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			watchdog: watchdog@20300 {
-				compatible = "marvell,armada-380-wdt";
-				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-				interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			cpurst: cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x10>;
-			};
-
-			mpcore-soc-ctrl@20d20 {
-				compatible = "marvell,armada-380-mpcore-soc-ctrl";
-				reg = <0x20d20 0x6c>;
-			};
-
-			coherencyfab: coherency-fabric@21010 {
-				compatible = "marvell,armada-380-coherency-fabric";
-				reg = <0x21010 0x1c>;
-			};
-
-			pmsu: pmsu@22000 {
-				compatible = "marvell,armada-380-pmsu";
-				reg = <0x22000 0x1000>;
-			};
-
-			/*
-			 * As a special exception to the "order by
-			 * register address" rule, the eth0 node is
-			 * placed here to ensure that it gets
-			 * registered as the first interface, since
-			 * the network subsystem doesn't allow naming
-			 * interfaces using DT aliases. Without this,
-			 * the ordering of interfaces is different
-			 * from the one used in U-Boot and the
-			 * labeling of interfaces on the boards, which
-			 * is very confusing for users.
-			 */
-			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x70000 0x4000>;
-				interrupts-extended = <&mpic 8>;
-				clocks = <&gateclk 4>;
-				tx-csum-limit = <9800>;
-				status = "disabled";
-			};
-
-			eth1: ethernet@30000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x30000 0x4000>;
-				interrupts-extended = <&mpic 10>;
-				clocks = <&gateclk 3>;
-				status = "disabled";
-			};
-
-			eth2: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x34000 0x4000>;
-				interrupts-extended = <&mpic 12>;
-				clocks = <&gateclk 2>;
-				status = "disabled";
-			};
-
-			usb0: usb@58000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x58000 0x500>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 18>;
-				status = "disabled";
-			};
-
-			xor0: xor@60800 {
-				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60a00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor1: xor@60900 {
-				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gateclk 28>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			mdio: mdio@72004 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0x72004 0x4>;
-				clocks = <&gateclk 4>;
-			};
-
-			cesa: crypto@90000 {
-				compatible = "marvell,armada-38x-crypto";
-				reg = <0x90000 0x10000>;
-				reg-names = "regs";
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 23>, <&gateclk 21>,
-					 <&gateclk 14>, <&gateclk 16>;
-				clock-names = "cesa0", "cesa1",
-					      "cesaz0", "cesaz1";
-				marvell,crypto-srams = <&crypto_sram0>,
-						       <&crypto_sram1>;
-				marvell,crypto-sram-size = <0x800>;
-			};
-
-			rtc: rtc@a3800 {
-				compatible = "marvell,armada-380-rtc";
-				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
-				reg-names = "rtc", "rtc-soc";
-				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			ahci0: sata@a8000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xa8000 0x2000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 15>;
-				status = "disabled";
-			};
-
-			bm: bm@c8000 {
-				compatible = "marvell,armada-380-neta-bm";
-				reg = <0xc8000 0xac>;
-				clocks = <&gateclk 13>;
-				internal-mem = <&bm_bppi>;
-				status = "disabled";
-			};
-
-			ahci1: sata@e0000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xe0000 0x2000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 30>;
-				status = "disabled";
-			};
-
-			coredivclk: clock@e4250 {
-				compatible = "marvell,armada-380-corediv-clock";
-				reg = <0xe4250 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-
-			thermal: thermal@e8078 {
-				compatible = "marvell,armada380-thermal";
-				reg = <0xe4078 0x4>, <0xe4070 0x8>;
-				status = "okay";
-			};
-
-			nand_controller: nand-controller@d0000 {
-				compatible = "marvell,armada370-nand-controller";
-				reg = <0xd0000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coredivclk 0>;
-				status = "disabled";
-			};
-
-			sdhci: sdhci@d8000 {
-				compatible = "marvell,armada-380-sdhci";
-				reg-names = "sdhci", "mbus", "conf-sdio3";
-				reg = <0xd8000 0x1000>,
-					<0xdc000 0x100>,
-					<0x18454 0x4>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 17>;
-				mrvl,clk-delay-cycles = <0x1F>;
-				status = "disabled";
-			};
-
-			audio_controller: audio-controller@e8000 {
-				#sound-dai-cells = <1>;
-				compatible = "marvell,armada-380-audio";
-				reg = <0xe8000 0x4000>, <0x18410 0xc>,
-				      <0x18204 0x4>;
-				reg-names = "i2s_regs", "pll_regs", "soc_ctrl";
-				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 0>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			usb3_0: usb3@f0000 {
-				compatible = "marvell,armada-380-xhci";
-				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			usb3_1: usb3@f8000 {
-				compatible = "marvell,armada-380-xhci";
-				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-		};
-
-		crypto_sram0: sa-sram0 {
-			compatible = "mmio-sram";
-			reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
-			clocks = <&gateclk 23>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
-		};
-
-		crypto_sram1: sa-sram1 {
-			compatible = "mmio-sram";
-			reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
-			clocks = <&gateclk 21>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
-		};
-
-		bm_bppi: bm-bppi {
-			compatible = "mmio-sram";
-			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
-			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&gateclk 13>;
-			no-memory-wc;
-			status = "disabled";
-		};
-
-		spi0: spi@10600 {
-			compatible = "marvell,armada-380-spi",
-					"marvell,orion-spi";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		spi1: spi@10680 {
-			compatible = "marvell,armada-380-spi",
-					"marvell,orion-spi";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-	};
-
-	clocks {
-		/* 1 GHz fixed main PLL */
-		mainpll: mainpll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000000>;
-		};
-
-		/* 25 MHz reference crystal */
-		refclk: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
deleted file mode 100644
index 792d0a0184e82..0000000000000
--- a/arch/arm/boot/dts/armada-390-db.dts
+++ /dev/null
@@ -1,142 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada 390 Development Board
- * (DB-88F6920)
- *
- * Copyright (C) 2016 Marvell
- *
- * Grzegorz Jaszczyk <jaz@semihalf.com>
- */
-
-/dts-v1/;
-#include "armada-390.dtsi"
-
-/ {
-	model = "Marvell Armada 390 Development Board";
-	compatible = "marvell,a390-db", "marvell,armada390";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-
-				eeprom@50 {
-					compatible = "atmel,24c64";
-					reg = <0x50>;
-				};
-			};
-
-			/* CON104 */
-			serial@12000 {
-				status = "okay";
-			};
-
-			/* CON97 */
-			usb@58000 {
-				status = "okay";
-			};
-
-			/* CON98 */
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		pcie {
-			status = "okay";
-
-			/* CON30 */
-			pcie@1,0 {
-				status = "okay";
-			};
-
-			/* CON44 */
-			pcie@2,0 {
-				status = "okay";
-			};
-
-			/* CON61 */
-			pcie@3,0 {
-				status = "okay";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-0 = <&spi1_pins>;
-	pinctrl-names = "default";
-
-	flash@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "n25q128a13",
-			     "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x400000>;
-			};
-			partition@400000 {
-				label = "Filesystem";
-				reg = <0x400000 0xc00000>;
-			};
-		};
-	};
-};
-
-&nand_controller {
-	status = "okay";
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x800000>;
-			};
-			partition@800000 {
-				label = "Linux";
-				reg = <0x800000 0x800000>;
-			};
-			partition@1000000 {
-				label = "Filesystem";
-				reg = <0x1000000 0x3f000000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi
deleted file mode 100644
index aa2057d4d6f81..0000000000000
--- a/arch/arm/boot/dts/armada-390.dtsi
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 390 SoC.
- *
- * Copyright (C) 2015 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-#include "armada-39x.dtsi"
-
-/ {
-	compatible = "marvell,armada390";
-
-	soc {
-		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6920-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/armada-395-gp.dts
deleted file mode 100644
index 6dd9e9077f842..0000000000000
--- a/arch/arm/boot/dts/armada-395-gp.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for Marvell Armada 395 GP board
- *
- * Copyright (C) 2016 Marvell
- *
- * Grzegorz Jaszczyk <jaz@semihalf.com>
- */
-
-/dts-v1/;
-#include "armada-395.dtsi"
-
-/ {
-	model = "Marvell Armada 395 GP Board";
-	compatible = "marvell,a395-gp", "marvell,armada395",
-		     "marvell,armada390";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-
-				eeprom@57 {
-					compatible = "atmel,24c64";
-					reg = <0x57>;
-				};
-			};
-
-			serial@12000 {
-				/*
-				 * Exported on the micro USB connector CON17
-				 * through an FTDI
-				 */
-				status = "okay";
-			};
-
-			/* CON1 */
-			usb@58000 {
-				status = "okay";
-			};
-
-			/* CON2 */
-			sata@a8000 {
-				status = "okay";
-			};
-
-			/* CON18 */
-			sdhci@d8000 {
-				clock-frequency = <200000000>;
-				broken-cd;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-				no-1-8-v;
-			};
-
-			/* CON4 */
-			usb3@f0000 {
-				status = "okay";
-			};
-		};
-
-		pcie {
-			status = "okay";
-
-			/*
-			 * The two PCIe units are accessible through
-			 * mini PCIe slot on the board.
-			 */
-
-			/* CON7 */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-
-			/* CON8 */
-			pcie@4,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
-
-&nand_controller {
-	status = "okay";
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0x00000000 0x00600000>;
-				read-only;
-			};
-
-			partition@800000 {
-				label = "uImage";
-				reg = <0x00600000 0x00400000>;
-				read-only;
-			};
-
-			partition@1000000 {
-				label = "Root";
-				reg = <0x00a00000 0x3f600000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-395.dtsi b/arch/arm/boot/dts/armada-395.dtsi
deleted file mode 100644
index e18a7d9cd7d43..0000000000000
--- a/arch/arm/boot/dts/armada-395.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 395 SoC.
- *
- * Copyright (C) 2016 Marvell
- *
- * Grzegorz Jaszczyk <jaz@semihalf.com>
- */
-
-#include "armada-39x.dtsi"
-
-/ {
-	compatible = "marvell,armada395", "marvell,armada390";
-
-	soc {
-		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6925-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-
-			sata@a8000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xa8000 0x2000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 15>;
-				status = "disabled";
-			};
-
-			usb3@f0000 {
-				compatible = "marvell,armada-380-xhci";
-				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
deleted file mode 100644
index ec6cdbeedde71..0000000000000
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 398 Development Board
- *
- * Copyright (C) 2015 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-/dts-v1/;
-#include "armada-398.dtsi"
-
-/ {
-	model = "Marvell Armada 398 Development Board";
-	compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				pinctrl-0 = <&uart0_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			serial@12100 {
-				pinctrl-0 = <&uart1_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			usb@58000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		pcie {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				status = "okay";
-			};
-
-			pcie@3,0 {
-				status = "okay";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-0 = <&spi1_pins>;
-	pinctrl-names = "default";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "n25q128a13", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <108000000>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0 0x400000>;
-		};
-
-		partition@400000 {
-			label = "Filesystem";
-			reg = <0x400000 0x1000000>;
-		};
-	};
-};
-
-&nand_controller {
-	status = "okay";
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x800000>;
-			};
-			partition@800000 {
-				label = "Linux";
-				reg = <0x800000 0x800000>;
-			};
-			partition@1000000 {
-				label = "Filesystem";
-				reg = <0x1000000 0x3f000000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi
deleted file mode 100644
index c5ac89399ce14..0000000000000
--- a/arch/arm/boot/dts/armada-398.dtsi
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 398 SoC.
- *
- * Copyright (C) 2015 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-#include "armada-395.dtsi"
-
-/ {
-	compatible = "marvell,armada398", "marvell,armada390";
-
-	soc {
-		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6928-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-
-			sata@e0000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xe0000 0x2000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 30>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
deleted file mode 100644
index 9d1cac49c022f..0000000000000
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ /dev/null
@@ -1,594 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 39x family of SoCs.
- *
- * Copyright (C) 2015 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Marvell Armada 39x family SoC";
-	compatible = "marvell,armada390";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-390-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts-extended = <&mpic 3>;
-	};
-
-	soc {
-		compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
-			     "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		interrupt-parent = <&gic>;
-		pcie-mem-aperture = <0xe0000000 0x8000000>;
-		pcie-io-aperture  = <0xe8000000 0x100000>;
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			L2: cache-controller@8000 {
-				compatible = "arm,pl310-cache";
-				reg = <0x8000 0x1000>;
-				cache-unified;
-				cache-level = <2>;
-				arm,double-linefill-incr = <0>;
-				arm,double-linefill-wrap = <0>;
-				arm,double-linefill = <0>;
-				prefetch-data = <1>;
-			};
-
-			scu@c000 {
-				compatible = "arm,cortex-a9-scu";
-				reg = <0xc000 0x100>;
-			};
-
-			timer@c600 {
-				compatible = "arm,cortex-a9-twd-timer";
-				reg = <0xc600 0x20>;
-				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
-				clocks = <&coreclk 2>;
-			};
-
-			gic: interrupt-controller@d000 {
-				compatible = "arm,cortex-a9-gic";
-				#interrupt-cells = <3>;
-				#size-cells = <0>;
-				interrupt-controller;
-				reg = <0xd000 0x1000>,
-				      <0xc100 0x100>;
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@11200 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11200 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@11300 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11300 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			uart0: serial@12000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			uart1: serial@12100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			uart2: serial@12200 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12200 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			uart3: serial@12300 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12300 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			pinctrl@18000 {
-				i2c0_pins: i2c0-pins {
-					marvell,pins = "mpp2", "mpp3";
-					marvell,function = "i2c0";
-				};
-
-				uart0_pins: uart0-pins {
-					marvell,pins = "mpp0", "mpp1";
-					marvell,function = "ua0";
-				};
-
-				uart1_pins: uart1-pins {
-					marvell,pins = "mpp19", "mpp20";
-					marvell,function = "ua1";
-				};
-
-				spi1_pins: spi1-pins {
-					marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
-					marvell,function = "spi1";
-				};
-
-				nand_pins: nand-pins {
-					marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33",
-						       "mpp38", "mpp28", "mpp40", "mpp42",
-						       "mpp35", "mpp36", "mpp25", "mpp30",
-						       "mpp32";
-					marvell,function = "dev";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <28>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			system-controller@18200 {
-				compatible = "marvell,armada-390-system-controller",
-					     "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-390-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			coreclk: mvebu-sar@18600 {
-				compatible = "marvell,armada-390-core-clock";
-				reg = <0x18600 0x04>;
-				#clock-cells = <1>;
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
-			};
-
-			mpic: interrupt-controller@20a00 {
-				compatible = "marvell,mpic";
-				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-380-timer",
-					     "marvell,armada-xp-timer";
-				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-						      <&mpic 5>,
-						      <&mpic 6>;
-				clocks = <&coreclk 2>, <&coreclk 5>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-380-wdt";
-				reg = <0x20300 0x34>, <0x20704 0x4>,
-				      <0x18260 0x4>;
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x10>;
-			};
-
-			mpcore-soc-ctrl@20d20 {
-				compatible = "marvell,armada-380-mpcore-soc-ctrl";
-				reg = <0x20d20 0x6c>;
-			};
-
-			coherency-fabric@21010 {
-				compatible = "marvell,armada-380-coherency-fabric";
-				reg = <0x21010 0x1c>;
-			};
-
-			pmsu@22000 {
-				compatible = "marvell,armada-390-pmsu",
-					     "marvell,armada-380-pmsu";
-				reg = <0x22000 0x1000>;
-			};
-
-			xor@60800 {
-				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60a00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor@60900 {
-				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gateclk 28>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			rtc@a3800 {
-				compatible = "marvell,armada-380-rtc";
-				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
-				reg-names = "rtc", "rtc-soc";
-				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			nand_controller: nand-controller@d0000 {
-				compatible = "marvell,armada370-nand-controller";
-				reg = <0xd0000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coredivclk 0>;
-				status = "disabled";
-			};
-
-			sdhci@d8000 {
-				compatible = "marvell,armada-380-sdhci";
-				reg-names = "sdhci", "mbus", "conf-sdio3";
-				reg = <0xd8000 0x1000>,
-					<0xdc000 0x100>,
-					<0x18454 0x4>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 17>;
-				mrvl,clk-delay-cycles = <0x1F>;
-				status = "disabled";
-			};
-
-			coredivclk: clock@e4250 {
-				compatible = "marvell,armada-390-corediv-clock",
-					     "marvell,armada-380-corediv-clock";
-				reg = <0xe4250 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-
-			thermal@e8078 {
-				compatible = "marvell,armada380-thermal";
-				reg = <0xe4078 0x4>, <0xe4074 0x4>;
-				status = "okay";
-			};
-		};
-
-		pcie {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
-
-			/*
-			 * This port can be either x4 or x1. When
-			 * configured in x4 by the bootloader, then
-			 * pcie@4,0 is not available.
-			 */
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
-						<0 0 0 2 &pcie1_intc 1>,
-						<0 0 0 3 &pcie1_intc 2>,
-						<0 0 0 4 &pcie1_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			/* x1 port */
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
-						<0 0 0 2 &pcie2_intc 1>,
-						<0 0 0 3 &pcie2_intc 2>,
-						<0 0 0 4 &pcie2_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-
-				pcie2_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			/* x1 port */
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
-						<0 0 0 2 &pcie3_intc 1>,
-						<0 0 0 3 &pcie3_intc 2>,
-						<0 0 0 4 &pcie3_intc 3>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-
-				pcie3_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			/*
-			 * x1 port only available when pcie@1,0 is
-			 * configured as a x1 port
-			 */
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
-						<0 0 0 2 &pcie4_intc 1>,
-						<0 0 0 3 &pcie4_intc 2>,
-						<0 0 0 4 &pcie4_intc 3>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-
-				pcie4_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		spi0: spi@10600 {
-			compatible = "marvell,armada-390-spi",
-					"marvell,orion-spi";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		spi1: spi@10680 {
-			compatible = "marvell,armada-390-spi",
-					"marvell,orion-spi";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-	};
-
-	clocks {
-		/* 1 GHz fixed main PLL */
-		mainpll: mainpll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000000>;
-		};
-
-		/* 25 MHz reference crystal */
-		refclk: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
deleted file mode 100644
index 7a7e2066c498a..0000000000000
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell 98dx3236 family SoC
- *
- * Copyright (C) 2016 Allied Telesis Labs
- *
- * Contains definitions specific to the 98dx3236 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-370-xp.dtsi"
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	model = "Marvell 98DX3236 SoC";
-	compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,98dx3236-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		compatible = "marvell,armadaxp-mbus", "simple-bus";
-
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-			  MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
-			  MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
-		};
-
-		/*
-		 * 98DX3236 has 1 x1 PCIe unit Gen2.0
-		 */
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 58>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
-						<0 0 0 2 &pcie1_intc 1>,
-						<0 0 0 3 &pcie1_intc 2>,
-						<0 0 0 4 &pcie1_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		internal-regs {
-			sdramc: sdramc@1400 {
-				compatible = "marvell,armada-xp-sdram-controller";
-				reg = <0x1400 0x500>;
-			};
-
-			L2: l2-cache@8000 {
-				compatible = "marvell,aurora-system-cache";
-				reg = <0x08000 0x1000>;
-				cache-id-part = <0x100>;
-				cache-level = <2>;
-				cache-unified;
-				wt-override;
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			/* does not exist */
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				status = "disabled";
-			};
-
-			gpio2: gpio@18180 { /* rework some properties */
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <1>; /* only gpio #32 */
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>;
-			};
-
-			systemc: system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x500>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,mv98dx3236-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			cpuclk: clock-complex@18700 {
-				#clock-cells = <1>;
-				compatible = "marvell,mv98dx3236-cpu-clock";
-				reg = <0x18700 0x24>, <0x1c054 0x10>;
-				clocks = <&coreclk 1>;
-			};
-
-			corediv-clock@18740 {
-				status = "disabled";
-			};
-
-			cpu-config@21000 {
-				compatible = "marvell,armada-xp-cpu-config";
-				reg = <0x21000 0x8>;
-			};
-
-			ethernet@70000 {
-				compatible = "marvell,armada-xp-neta";
-			};
-
-			ethernet@74000 {
-				compatible = "marvell,armada-xp-neta";
-			};
-
-			xor1: xor@f0800 {
-				compatible = "marvell,orion-xor";
-				reg = <0xf0800 0x100
-				       0xf0a00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <51>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <52>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			nand_controller: nand-controller@d0000 {
-				clocks = <&dfx_coredivclk 0>;
-			};
-
-			xor0: xor@f0900 {
-				compatible = "marvell,orion-xor";
-				reg = <0xF0900 0x100
-				       0xF0B00 0x100>;
-				clocks = <&gateclk 28>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <94>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <95>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-		};
-
-		dfx: dfx-server@ac000000 {
-			compatible = "marvell,dfx-server", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
-			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
-
-			coreclk: mvebu-sar@f8204 {
-				compatible = "marvell,mv98dx3236-core-clock";
-				reg = <0xf8204 0x4>;
-				#clock-cells = <1>;
-			};
-
-			dfx_coredivclk: corediv-clock@f8268 {
-				compatible = "marvell,mv98dx3236-corediv-clock";
-				reg = <0xf8268 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-		};
-
-		switch: switch@a8000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
-
-			pp0: packet-processor@0 {
-				compatible = "marvell,prestera-98dx3236", "marvell,prestera";
-				reg = <0 0x4000000>;
-				interrupts = <33>, <34>, <35>;
-				dfx = <&dfx>;
-			};
-		};
-	};
-
-	clocks {
-		/* 25 MHz reference crystal */
-		refclk: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-};
-
-&i2c0 {
-	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-	reg = <0x11000 0x100>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-};
-
-&mpic {
-	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&timer {
-	compatible = "marvell,armada-xp-timer";
-	clocks = <&coreclk 2>, <&refclk>;
-	clock-names = "nbclk", "fixed";
-};
-
-&watchdog {
-	compatible = "marvell,armada-xp-wdt";
-	clocks = <&coreclk 2>, <&refclk>;
-	clock-names = "nbclk", "fixed";
-	interrupts = <93>, <38>;
-};
-
-&cpurst {
-	reg = <0x20800 0x20>;
-};
-
-&usb0 {
-	clocks = <&gateclk 18>;
-};
-
-&usb1 {
-	clocks = <&gateclk 19>;
-};
-
-&pinctrl {
-	compatible = "marvell,98dx3236-pinctrl";
-
-	nand_pins: nand-pins {
-		marvell,pins = "mpp20", "mpp21", "mpp22",
-			       "mpp23", "mpp24", "mpp25",
-			       "mpp26", "mpp27", "mpp28",
-			       "mpp29", "mpp30";
-		marvell,function = "dev";
-	};
-
-	nand_rb: nand-rb {
-		marvell,pins = "mpp19";
-		marvell,function = "nand";
-	};
-
-	spi0_pins: spi0-pins {
-		marvell,pins = "mpp0", "mpp1",
-			       "mpp2", "mpp3";
-		marvell,function = "spi0";
-	};
-
-	i2c0_pins: i2c-pins-0 {
-		marvell,pins = "mpp14", "mpp15";
-		marvell,function = "i2c0";
-	};
-};
-
-&spi0 {
-	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
-	pinctrl-0 = <&spi0_pins>;
-	pinctrl-names = "default";
-};
-
-&sdio {
-	status = "disabled";
-};
-
-&uart0 {
-	compatible = "marvell,armada-38x-uart";
-};
-
-&uart1 {
-	compatible = "marvell,armada-38x-uart";
-};
-
diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
deleted file mode 100644
index 1d9d8a8ea60ca..0000000000000
--- a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell 98dx3336 family SoC
- *
- * Copyright (C) 2016 Allied Telesis Labs
- *
- * Contains definitions specific to the 98dx3236 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp-98dx3236.dtsi"
-
-/ {
-	model = "Marvell 98DX3336 SoC";
-	compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
-
-	cpus {
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			resume@20980 {
-				compatible = "marvell,98dx3336-resume-ctrl";
-				reg = <0x20980 0x10>;
-			};
-		};
-	};
-};
-
-&pp0 {
-	compatible = "marvell,prestera-98dx3336", "marvell,prestera";
-};
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
deleted file mode 100644
index 48ffdc72bfc75..0000000000000
--- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell 98dx4521 family SoC
- *
- * Copyright (C) 2016 Allied Telesis Labs
- *
- * Contains definitions specific to the 98dx4521 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp-98dx3236.dtsi"
-
-/ {
-	model = "Marvell 98DX4251 SoC";
-	compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
-
-	cpus {
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			resume@20980 {
-				compatible = "marvell,98dx3336-resume-ctrl";
-				reg = <0x20980 0x10>;
-			};
-		};
-	};
-};
-
-&sdio {
-	status = "okay";
-};
-
-&pinctrl {
-	compatible = "marvell,98dx4251-pinctrl";
-
-	sdio_pins: sdio-pins {
-		marvell,pins = "mpp5", "mpp6", "mpp7",
-			       "mpp8", "mpp9", "mpp10";
-		marvell,function = "sd0";
-	};
-};
-
-&pp0 {
-	compatible = "marvell,prestera-98dx4251", "marvell,prestera";
-	interrupts = <33>, <34>, <35>, <36>;
-};
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
deleted file mode 100644
index 5a74197be0ad8..0000000000000
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ /dev/null
@@ -1,142 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell RD-AXPWiFiAP.
- *
- * Note: this board is shipped with a new generation boot loader that
- * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
- * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the
- * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used.
- *
- * Copyright (C) 2013 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Marvell RD-AXPWiFiAP";
-	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
-
-		internal-regs {
-			/* UART0 */
-			serial@12000 {
-				status = "okay";
-			};
-
-			/* UART1 */
-			serial@12100 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <1>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&keys_pin>;
-		pinctrl-names = "default";
-
-		button-reset {
-			label = "Factory Reset Button";
-			linux,code = <KEY_SETUP>;
-			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&mdio {
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* First mini-PCIe port */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* Second mini-PCIe port */
-	pcie@2,0 {
-		/* Port 0, Lane 1 */
-		status = "okay";
-	};
-
-	/* Renesas uPD720202 USB 3.0 controller */
-	pcie@3,0 {
-		/* Port 0, Lane 3 */
-		status = "okay";
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&phy_int_pin>;
-	pinctrl-names = "default";
-
-	keys_pin: keys-pin {
-		marvell,pins = "mpp33";
-		marvell,function = "gpio";
-	};
-
-	phy_int_pin: phy-int-pin {
-		marvell,pins = "mpp32";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "n25q128a13", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
deleted file mode 100644
index c28e140b4afc8..0000000000000
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for MikroTik CRS305-1G-4S+ Bit board
- *
- * Copyright (C) 2020 Sartura Ltd.
- * Author: Luka Kovacic <luka.kovacic@sartura.hr>
- */
-
-#include "armada-xp-crs305-1g-4s.dtsi"
-
-/ {
-	model = "MikroTik CRS305-1G-4S+ Bit";
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-		m25p,fast-read;
-
-		partition@u-boot {
-			reg = <0x00000000 0x001f0000>;
-			label = "u-boot";
-		};
-		partition@u-boot-env {
-			reg = <0x001f0000 0x00010000>;
-			label = "u-boot-env";
-		};
-		partition@ubi1 {
-			reg = <0x00200000 0x03f00000>;
-			label = "ubi1";
-		};
-		partition@ubi2 {
-			reg = <0x04100000 0x03f00000>;
-			label = "ubi2";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts
deleted file mode 100644
index 010b83b542127..0000000000000
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for MikroTik CRS305-1G-4S+ board
- *
- * Copyright (C) 2020 Sartura Ltd.
- * Author: Luka Kovacic <luka.kovacic@sartura.hr>
- */
-
-#include "armada-xp-crs305-1g-4s.dtsi"
-
-/ {
-	model = "MikroTik CRS305-1G-4S+";
-};
-
-&spi0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
deleted file mode 100644
index 47b003a81bd4b..0000000000000
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for CRS305-1G-4S board
- *
- * Copyright (C) 2016 Allied Telesis Labs
- * Copyright (C) 2020 Sartura Ltd.
- *
- * Based on armada-xp-db.dts
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-98dx3236.dtsi"
-
-/ {
-	model = "CRS305-1G-4S+";
-	compatible = "mikrotik,crs305-1g-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
-	};
-};
-
-&L2 {
-	arm,parity-enable;
-	marvell,ecc-enable;
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Device Bus parameters are required */
-
-	/* Read parameters */
-	devbus,bus-width    = <16>;
-	devbus,turn-off-ps  = <60000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <124000>;
-	devbus,acc-next-ps  = <248000>;
-	devbus,rd-setup-ps  = <0>;
-	devbus,rd-hold-ps   = <0>;
-
-	/* Write parameters */
-	devbus,sync-enable = <0>;
-	devbus,wr-high-ps  = <60000>;
-	devbus,wr-low-ps   = <60000>;
-	devbus,ale-wr-ps   = <60000>;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-		m25p,fast-read;
-
-		partition@u-boot {
-			reg = <0x00000000 0x001f0000>;
-			label = "u-boot";
-		};
-		partition@u-boot-env {
-			reg = <0x001f0000 0x00010000>;
-			label = "u-boot-env";
-		};
-		partition@ubi1 {
-			reg = <0x00200000 0x00e00000>;
-			label = "ubi1";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
deleted file mode 100644
index 20ba5c823bb27..0000000000000
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for MikroTik CRS326-24G-2S+ Bit board
- *
- * Copyright (C) 2020 Sartura Ltd.
- * Author: Luka Kovacic <luka.kovacic@sartura.hr>
- */
-
-#include "armada-xp-crs326-24g-2s.dtsi"
-
-/ {
-	model = "MikroTik CRS326-24G-2S+ Bit";
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-		m25p,fast-read;
-
-		partition@u-boot {
-			reg = <0x00000000 0x001f0000>;
-			label = "u-boot";
-		};
-		partition@u-boot-env {
-			reg = <0x001f0000 0x00010000>;
-			label = "u-boot-env";
-		};
-		partition@ubi1 {
-			reg = <0x00200000 0x03f00000>;
-			label = "ubi1";
-		};
-		partition@ubi2 {
-			reg = <0x04100000 0x03f00000>;
-			label = "ubi2";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts
deleted file mode 100644
index 83aef43f66d54..0000000000000
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for MikroTik CRS326-24G-2S+ board
- *
- * Copyright (C) 2020 Sartura Ltd.
- * Author: Luka Kovacic <luka.kovacic@sartura.hr>
- */
-
-#include "armada-xp-crs326-24g-2s.dtsi"
-
-/ {
-	model = "MikroTik CRS326-24G-2S+";
-};
-
-&spi0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
deleted file mode 100644
index cab99d8e29113..0000000000000
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for CRS326-24G-2S board
- *
- * Copyright (C) 2016 Allied Telesis Labs
- * Copyright (C) 2020 Sartura Ltd.
- *
- * Based on armada-xp-db.dts
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-98dx3236.dtsi"
-
-/ {
-	model = "CRS326-24G-2S+";
-	compatible = "mikrotik,crs326-24g-2s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
-	};
-};
-
-&L2 {
-	arm,parity-enable;
-	marvell,ecc-enable;
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Device Bus parameters are required */
-
-	/* Read parameters */
-	devbus,bus-width    = <16>;
-	devbus,turn-off-ps  = <60000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <124000>;
-	devbus,acc-next-ps  = <248000>;
-	devbus,rd-setup-ps  = <0>;
-	devbus,rd-hold-ps   = <0>;
-
-	/* Write parameters */
-	devbus,sync-enable = <0>;
-	devbus,wr-high-ps  = <60000>;
-	devbus,wr-low-ps   = <60000>;
-	devbus,ale-wr-ps   = <60000>;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-		m25p,fast-read;
-
-		partition@u-boot {
-			reg = <0x00000000 0x001f0000>;
-			label = "u-boot";
-		};
-		partition@u-boot-env {
-			reg = <0x001f0000 0x00010000>;
-			label = "u-boot-env";
-		};
-		partition@ubi1 {
-			reg = <0x00200000 0x00e00000>;
-			label = "ubi1";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
deleted file mode 100644
index 2caa3980fdf66..0000000000000
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for MikroTik CRS328-4C-20S-4S+ Bit board
- *
- * Copyright (C) 2020 Sartura Ltd.
- * Author: Luka Kovacic <luka.kovacic@sartura.hr>
- */
-
-#include "armada-xp-crs328-4c-20s-4s.dtsi"
-
-/ {
-	model = "MikroTik CRS328-4C-20S-4S+ Bit";
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-		m25p,fast-read;
-
-		partition@u-boot {
-			reg = <0x00000000 0x001f0000>;
-			label = "u-boot";
-		};
-		partition@u-boot-env {
-			reg = <0x001f0000 0x00010000>;
-			label = "u-boot-env";
-		};
-		partition@ubi1 {
-			reg = <0x00200000 0x03f00000>;
-			label = "ubi1";
-		};
-		partition@ubi2 {
-			reg = <0x04100000 0x03f00000>;
-			label = "ubi2";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts
deleted file mode 100644
index 665757f6e18ea..0000000000000
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for MikroTik CRS328-4C-20S-4S+ board
- *
- * Copyright (C) 2020 Sartura Ltd.
- * Author: Luka Kovacic <luka.kovacic@sartura.hr>
- */
-
-#include "armada-xp-crs328-4c-20s-4s.dtsi"
-
-/ {
-	model = "MikroTik CRS328-4C-20S-4S+";
-};
-
-&spi0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
deleted file mode 100644
index 7028482ce4b2d..0000000000000
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for CRS328-4C-20S-4S+ board
- *
- * Copyright (C) 2016 Allied Telesis Labs
- * Copyright (C) 2020 Sartura Ltd.
- *
- * Based on armada-xp-db.dts
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-98dx3236.dtsi"
-
-/ {
-	model = "CRS328-4C-20S-4S+";
-	compatible = "mikrotik,crs328-4c-20s-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
-	};
-};
-
-&L2 {
-	arm,parity-enable;
-	marvell,ecc-enable;
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Device Bus parameters are required */
-
-	/* Read parameters */
-	devbus,bus-width    = <16>;
-	devbus,turn-off-ps  = <60000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <124000>;
-	devbus,acc-next-ps  = <248000>;
-	devbus,rd-setup-ps  = <0>;
-	devbus,rd-hold-ps   = <0>;
-
-	/* Write parameters */
-	devbus,sync-enable = <0>;
-	devbus,wr-high-ps  = <60000>;
-	devbus,wr-low-ps   = <60000>;
-	devbus,ale-wr-ps   = <60000>;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-		m25p,fast-read;
-
-		partition@u-boot {
-			reg = <0x00000000 0x001f0000>;
-			label = "u-boot";
-		};
-		partition@u-boot-env {
-			reg = <0x001f0000 0x00010000>;
-			label = "u-boot-env";
-		};
-		partition@ubi1 {
-			reg = <0x00200000 0x00e00000>;
-			label = "ubi1";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
deleted file mode 100644
index 02bef8dc42701..0000000000000
--- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for DB-DXBC2 board
- *
- * Copyright (C) 2016 Allied Telesis Labs
- *
- * Based on armada-xp-db.dts
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-98dx4251.dtsi"
-
-/ {
-	model = "Marvell Bobcat2 Evaluation Board";
-	compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
-	};
-
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Device Bus parameters are required */
-
-	/* Read parameters */
-	devbus,bus-width    = <16>;
-	devbus,turn-off-ps  = <60000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <124000>;
-	devbus,acc-next-ps  = <248000>;
-	devbus,rd-setup-ps  = <0>;
-	devbus,rd-hold-ps   = <0>;
-
-	/* Write parameters */
-	devbus,sync-enable = <0>;
-	devbus,wr-high-ps  = <60000>;
-	devbus,wr-low-ps   = <60000>;
-	devbus,ale-wr-ps   = <60000>;
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-	};
-};
-
-&sdio {
-	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	/* No CD or WP GPIOs */
-	broken-cd;
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p64";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <20000000>;
-		m25p,fast-read;
-
-		partition@u-boot {
-			reg = <0x00000000 0x00100000>;
-			label = "u-boot";
-		};
-		partition@u-boot-env {
-			reg = <0x00100000 0x00040000>;
-			label = "u-boot-env";
-		};
-		partition@unused {
-			reg = <0x00140000 0x00ec0000>;
-			label = "unused";
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
deleted file mode 100644
index d1b61dad0c461..0000000000000
--- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for DB-XC3-24G4XG board
- *
- * Copyright (C) 2016 Allied Telesis Labs
- *
- * Based on armada-xp-db.dts
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-98dx3336.dtsi"
-
-/ {
-	model = "DB-XC3-24G4XG";
-	compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
-	};
-};
-
-&L2 {
-	arm,parity-enable;
-	marvell,ecc-enable;
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Device Bus parameters are required */
-
-	/* Read parameters */
-	devbus,bus-width    = <16>;
-	devbus,turn-off-ps  = <60000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <124000>;
-	devbus,acc-next-ps  = <248000>;
-	devbus,rd-setup-ps  = <0>;
-	devbus,rd-hold-ps   = <0>;
-
-	/* Write parameters */
-	devbus,sync-enable = <0>;
-	devbus,wr-high-ps  = <60000>;
-	devbus,wr-low-ps   = <60000>;
-	devbus,ale-wr-ps   = <60000>;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p64";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <20000000>;
-		m25p,fast-read;
-
-		partition@u-boot {
-			reg = <0x00000000 0x00100000>;
-			label = "u-boot";
-		};
-		partition@u-boot-env {
-			reg = <0x00100000 0x00040000>;
-			label = "u-boot-env";
-		};
-		partition@unused {
-			reg = <0x00140000 0x00ec0000>;
-			label = "unused";
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
deleted file mode 100644
index 75318fd0fc117..0000000000000
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ /dev/null
@@ -1,245 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada XP evaluation board
- * (DB-78460-BP)
- *
- * Copyright (C) 2012-2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
-  *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Evaluation Board";
-	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 16 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x1000000>;
-				bank-width = <2>;
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <1>;
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <3>;
-			};
-
-			bm@c0000 {
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			usb@52000 {
-				status = "okay";
-			};
-
-			nand-controller@d0000 {
-				status = "okay";
-
-				nand@0 {
-					reg = <0>;
-					label = "pxa3xx_nand-0";
-					nand-rb = <0>;
-					nand-on-flash-bbt;
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						partition@0 {
-							label = "U-Boot";
-							reg = <0 0x800000>;
-						};
-						partition@800000 {
-							label = "Linux";
-							reg = <0x800000 0x800000>;
-						};
-						partition@1000000 {
-							label = "Filesystem";
-							reg = <0x1000000 0x3f000000>;
-						};
-					};
-				};
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/*
-	 * All 6 slots are physically present as
-	 * standard PCIe slots on the board.
-	 */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-	pcie@2,0 {
-		/* Port 0, Lane 1 */
-		status = "okay";
-	};
-	pcie@3,0 {
-		/* Port 0, Lane 2 */
-		status = "okay";
-	};
-	pcie@4,0 {
-		/* Port 0, Lane 3 */
-		status = "okay";
-	};
-	pcie@9,0 {
-		/* Port 2, Lane 0 */
-		status = "okay";
-	};
-	pcie@a,0 {
-		/* Port 3, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-
-	phy2: ethernet-phy@2 {
-		reg = <25>;
-	};
-
-	phy3: ethernet-phy@3 {
-		reg = <27>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p64", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <20000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
deleted file mode 100644
index d1d348b91c0a8..0000000000000
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ /dev/null
@@ -1,230 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada XP development board
- * (DB-MV784MP-GP)
- *
- * Copyright (C) 2013-2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
-	compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		/*
-                 * 8 GB of plug-in RAM modules by default.The amount
-                 * of memory available can be changed by the
-                 * bootloader according the size of the module
-                 * actually plugged. However, memory between
-                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
-                 * the address range used for I/O (internal registers,
-                 * MBus windows).
-		 */
-		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
-		      <0x00000001 0x00000000 0x00000001 0x00000000>;
-	};
-
-	cpus {
-		pm_pic {
-			ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
-				     <&gpio0 17 GPIO_ACTIVE_LOW>,
-				     <&gpio0 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 16 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x1000000>;
-				bank-width = <2>;
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-			pinctrl {
-				pinctrl-0 = <&pic_pins>;
-				pinctrl-names = "default";
-				pic_pins: pic-pins-0 {
-					marvell,pins = "mpp16", "mpp17",
-						       "mpp18";
-					marvell,function = "gpio";
-				};
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "qsgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "qsgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <1>;
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "qsgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "qsgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <3>;
-			};
-
-			/* Front-side USB slot */
-			usb@50000 {
-				status = "okay";
-			};
-
-			/* Back-side USB slot */
-			usb@51000 {
-				status = "okay";
-			};
-
-			bm@c0000 {
-				status = "okay";
-			};
-
-			nand-controller@d0000 {
-				status = "okay";
-
-				nand@0 {
-					reg = <0>;
-					label = "pxa3xx_nand-0";
-					nand-rb = <0>;
-					nand-on-flash-bbt;
-				};
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/*
-	 * The 3 slots are physically present as
-	 * standard PCIe slots on the board.
-	 */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-	pcie@9,0 {
-		/* Port 2, Lane 0 */
-		status = "okay";
-	};
-	pcie@a,0 {
-		/* Port 3, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy0: ethernet-phy@0 {
-		reg = <16>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <17>;
-	};
-
-	phy2: ethernet-phy@2 {
-		reg = <18>;
-	};
-
-	phy3: ethernet-phy@3 {
-		reg = <19>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "n25q128a13", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
deleted file mode 100644
index 0dad95ea26c2a..0000000000000
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ /dev/null
@@ -1,293 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Lenovo Iomega ix4-300d
- *
- * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Lenovo Iomega ix4-300d";
-	compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
-		     "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x20000000>; /* 512MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				clock-frequency = <400000>;
-				status = "okay";
-
-				adt7473@2e {
-					compatible = "adi,adt7473";
-					reg = <0x2e>;
-				};
-
-				eeprom@50 {
-					compatible = "atmel,24c64";
-					reg = <0x50>;
-				};
-
-				pcf8563@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-			};
-
-			nand-controller@d0000 {
-				status = "okay";
-
-				nand@0 {
-					reg = <0>;
-					label = "pxa3xx_nand-0";
-					nand-rb = <0>;
-					nand-on-flash-bbt;
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						partition@0 {
-							label = "u-boot";
-							reg = <0x00000000 0x000e0000>;
-							read-only;
-						};
-
-						partition@e0000 {
-							label = "u-boot-env";
-							reg = <0x000e0000 0x00020000>;
-							read-only;
-						};
-
-						partition@100000 {
-							label = "u-boot-env2";
-							reg = <0x00100000 0x00020000>;
-							read-only;
-						};
-
-						partition@120000 {
-							label = "zImage";
-							reg = <0x00120000 0x00400000>;
-						};
-
-						partition@520000 {
-							label = "initrd";
-							reg = <0x00520000 0x00400000>;
-						};
-
-						partition@e00000 {
-							label = "boot";
-							reg = <0x00e00000 0x3f200000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin &reset_button_pin
-			&select_button_pin &scroll_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-
-		select-button {
-			label = "Select Button";
-			linux,code = <BTN_SELECT>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		scroll-button {
-			label = "Scroll Button";
-			linux,code = <KEY_SCROLLDOWN>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	spi-3 {
-		compatible = "spi-gpio";
-		status = "okay";
-		gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
-		cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio_spi: gpio_spi@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <1>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&hdd_led_pin>;
-		pinctrl-names = "default";
-
-		hdd-led {
-			label = "ix4-300d:hdd:blue";
-			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		power-led {
-			label = "ix4-300d:power:white";
-			gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
-			/* init blinking while booting */
-			linux,default-trigger = "timer";
-			default-state = "on";
-		};
-
-		sysfail-led {
-			label = "ix4-300d:sysfail:red";
-			gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		sys-led {
-			label = "ix4-300d:sys:blue";
-			gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		hddfail-led {
-			label = "ix4-300d:hddfail:red";
-			gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-	};
-
-	/*
-	 * Warning: you need both eth1 & 0 PHY initialized (i.e having
-	 * them up does the tweak) for poweroff to shutdown otherwise it
-	 * reboots
-	 */
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff_pin>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-	};
-};
-&pciec {
-	status = "okay";
-
-	/* Quad port sata: Marvell 88SX7042 */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* USB 3.0 xHCI controller: NEC D720200F1 */
-	pcie@5,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-		reg = <1>;
-	};
-};
-
-&pinctrl {
-	poweroff_pin: poweroff-pin {
-		marvell,pins = "mpp24";
-		marvell,function = "gpio";
-	};
-
-	power_button_pin: power-button-pin {
-		marvell,pins = "mpp44";
-		marvell,function = "gpio";
-	};
-
-	reset_button_pin: reset-button-pin {
-		marvell,pins = "mpp45";
-		marvell,function = "gpio";
-	};
-	select_button_pin: select-button-pin {
-		marvell,pins = "mpp41";
-		marvell,function = "gpio";
-	};
-
-	scroll_button_pin: scroll-button-pin {
-		marvell,pins = "mpp42";
-		marvell,function = "gpio";
-	};
-
-	hdd_led_pin: hdd-led-pin {
-		marvell,pins = "mpp26";
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
deleted file mode 100644
index 7a0614fd0c93a..0000000000000
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ /dev/null
@@ -1,397 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for the Linksys WRT1900AC (Mamba).
- *
- * Note: this board is shipped with a new generation boot loader that
- * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
- * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be
- * used.
- *
- * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on armada-xp-axpwifiap.dts:
- *
- *     Copyright (C) 2013 Marvell
- *
- *     Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Linksys WRT1900AC";
-	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
-		     "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
-
-		internal-regs {
-
-			rtc@10300 {
-				/* No crystal connected to the internal RTC */
-				status = "disabled";
-			};
-
-			/* J10: VCC, NC, RX, NC, TX, GND  */
-			serial@12000 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <1>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-				bm,pool-short = <1>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-				bm,pool-short = <3>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			/* USB part of the eSATA/USB 2.0 port */
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-
-				tmp421@4c {
-					compatible = "ti,tmp421";
-					reg = <0x4c>;
-				};
-
-				tlc59116@68 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#gpio-cells = <2>;
-					compatible = "ti,tlc59116";
-					reg = <0x68>;
-
-					wan_amber@0 {
-						label = "mamba:amber:wan";
-						reg = <0x0>;
-					};
-
-					wan_white@1 {
-						label = "mamba:white:wan";
-						reg = <0x1>;
-					};
-
-					wlan_2g@2 {
-						label = "mamba:white:wlan_2g";
-						reg = <0x2>;
-					};
-
-					wlan_5g@3 {
-						label = "mamba:white:wlan_5g";
-						reg = <0x3>;
-					};
-
-					esata@4 {
-						label = "mamba:white:esata";
-						reg = <0x4>;
-						linux,default-trigger = "disk-activity";
-					};
-
-					usb2@5 {
-						label = "mamba:white:usb2";
-						reg = <0x5>;
-					};
-
-					usb3_1@6 {
-						label = "mamba:white:usb3_1";
-						reg = <0x6>;
-					};
-
-					usb3_2@7 {
-						label = "mamba:white:usb3_2";
-						reg = <0x7>;
-					};
-
-					wps_white@8 {
-						label = "mamba:white:wps";
-						reg = <0x8>;
-					};
-
-					wps_amber@9 {
-						label = "mamba:amber:wps";
-						reg = <0x9>;
-					};
-				};
-			};
-
-			bm@c8000 {
-				status = "okay";
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&keys_pin>;
-		pinctrl-names = "default";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-		};
-
-		button-reset {
-			label = "Factory Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&power_led_pin>;
-		pinctrl-names = "default";
-
-		led-power {
-			label = "mamba:white:power";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	pwm_fan {
-		/* SUNON HA4010V4-0000-C99 */
-
-		compatible = "pwm-fan";
-		pwms = <&gpio0 24 4000>;
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* Etron EJ168 USB 3.0 controller */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* First mini-PCIe port */
-	pcie@2,0 {
-		/* Port 0, Lane 1 */
-		status = "okay";
-	};
-
-	/* Second mini-PCIe port */
-	pcie@3,0 {
-		/* Port 0, Lane 3 */
-		status = "okay";
-	};
-};
-
-&pinctrl {
-
-	keys_pin: keys-pin {
-		marvell,pins = "mpp32", "mpp33";
-		marvell,function = "gpio";
-	};
-
-	power_led_pin: power-led-pin {
-		marvell,pins = "mpp40";
-		marvell,function = "gpio";
-	};
-
-	gpio_fan_pin: gpio-fan-pin {
-		marvell,pins = "mpp24";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "everspin,mr25h256";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <40000000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	switch@0 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan4";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan3";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan1";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "internet";
-			};
-
-			port@5 {
-				reg = <5>;
-				phy-mode = "rgmii-id";
-				ethernet = <&eth0>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;  /* 1MB */
-				read-only;
-			};
-
-			partition@100000 {
-				label = "u_env";
-				reg = <0x100000 0x40000>;    /* 256KB */
-			};
-
-			partition@140000 {
-				label = "s_env";
-				reg = <0x140000 0x40000>;    /* 256KB */
-			};
-
-			partition@900000 {
-				label = "devinfo";
-				reg = <0x900000 0x100000>;   /* 1MB */
-				read-only;
-			};
-
-			/* kernel1 overlaps with rootfs1 by design */
-			partition@a00000 {
-				label = "kernel1";
-				reg = <0xa00000 0x2800000>;  /* 40MB */
-			};
-
-			partition@d00000 {
-				label = "rootfs1";
-				reg = <0xd00000 0x2500000>;  /* 37MB */
-			};
-
-			/* kernel2 overlaps with rootfs2 by design */
-			partition@3200000 {
-				label = "kernel2";
-				reg = <0x3200000 0x2800000>; /* 40MB */
-			};
-
-			partition@3500000 {
-				label = "rootfs2";
-				reg = <0x3500000 0x2500000>; /* 37MB */
-			};
-
-			/*
-			 * 38MB, last MB is for the BBT, not writable
-			 */
-			partition@5a00000 {
-				label = "syscfg";
-				reg = <0x5a00000 0x2600000>;
-			};
-
-			/*
-			 * Unused area between "s_env" and "devinfo".
-			 * Moved here because otherwise the renumbered
-			 * partitions would break the bootloader
-			 * supplied bootargs
-			 */
-			partition@180000 {
-				label = "unused_area";
-				reg = <0x180000 0x780000>;   /* 7.5MB */
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
deleted file mode 100644
index 1395cea12759a..0000000000000
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada XP Matrix board
- *
- * Copyright (C) 2013 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- */
-
-/dts-v1/;
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Matrix Board";
-	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		/*
-		 * This board has 4 GB of RAM, but the last 256 MB of
-		 * RAM are not usable due to the overlap with the MBus
-		 * Window address range
-		 */
-		reg = <0 0x00000000 0 0xf0000000>;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy-mode = "sgmii";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
deleted file mode 100644
index 5ea9d509cd308..0000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ /dev/null
@@ -1,257 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Contains definitions specific to the Armada XP MV78230 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78230 SoC";
-	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x1 only.
-		 */
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 58>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
-						<0 0 0 2 &pcie1_intc 1>,
-						<0 0 0 3 &pcie1_intc 2>,
-						<0 0 0 4 &pcie1_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 59>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
-						<0 0 0 2 &pcie2_intc 1>,
-						<0 0 0 3 &pcie2_intc 2>,
-						<0 0 0 4 &pcie2_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-
-				pcie2_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 60>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
-						<0 0 0 2 &pcie3_intc 1>,
-						<0 0 0 3 &pcie3_intc 2>,
-						<0 0 0 4 &pcie3_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-
-				pcie3_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 61>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
-						<0 0 0 2 &pcie4_intc 1>,
-						<0 0 0 3 &pcie4_intc 2>,
-						<0 0 0 4 &pcie4_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-
-				pcie4_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 62>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
-						<0 0 0 2 &pcie5_intc 1>,
-						<0 0 0 3 &pcie5_intc 2>,
-						<0 0 0 4 &pcie5_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-
-				pcie5_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <17>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>;
-				clocks = <&coreclk 0>;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78230-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
deleted file mode 100644
index 6c6fbb9faf5ac..0000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ /dev/null
@@ -1,404 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Contains definitions specific to the Armada XP MV78260 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78260 SoC";
-	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4 only.
-		 */
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 58>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
-						<0 0 0 2 &pcie1_intc 1>,
-						<0 0 0 3 &pcie1_intc 2>,
-						<0 0 0 4 &pcie1_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 59>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
-						<0 0 0 2 &pcie2_intc 1>,
-						<0 0 0 3 &pcie2_intc 2>,
-						<0 0 0 4 &pcie2_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-
-				pcie2_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 60>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
-						<0 0 0 2 &pcie3_intc 1>,
-						<0 0 0 3 &pcie3_intc 2>,
-						<0 0 0 4 &pcie3_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-
-				pcie3_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 61>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
-						<0 0 0 2 &pcie4_intc 1>,
-						<0 0 0 3 &pcie4_intc 2>,
-						<0 0 0 4 &pcie4_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-
-				pcie4_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 62>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
-						<0 0 0 2 &pcie5_intc 1>,
-						<0 0 0 3 &pcie5_intc 2>,
-						<0 0 0 4 &pcie5_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-
-				pcie5_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie6: pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 63>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
-						<0 0 0 2 &pcie6_intc 1>,
-						<0 0 0 3 &pcie6_intc 2>,
-						<0 0 0 4 &pcie6_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-
-				pcie6_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie7: pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 64>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
-						<0 0 0 2 &pcie7_intc 1>,
-						<0 0 0 3 &pcie7_intc 2>,
-						<0 0 0 4 &pcie7_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-
-				pcie7_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie8: pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 65>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
-						<0 0 0 2 &pcie8_intc 1>,
-						<0 0 0 3 &pcie8_intc 2>,
-						<0 0 0 4 &pcie8_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-
-				pcie8_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie9: pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 99>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
-						<0 0 0 2 &pcie9_intc 1>,
-						<0 0 0 3 &pcie9_intc 2>,
-						<0 0 0 4 &pcie9_intc 3>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-
-				pcie9_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-xp-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78260-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
deleted file mode 100644
index 16185edf9aa5f..0000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ /dev/null
@@ -1,453 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Contains definitions specific to the Armada XP MV78460 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78460 SoC";
-	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <2>;
-			clocks = <&cpuclk 2>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <3>;
-			clocks = <&cpuclk 3>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. Two units are
-		 * x4/x1.
-		 */
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
-
-				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 58>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
-						<0 0 0 2 &pcie1_intc 1>,
-						<0 0 0 3 &pcie1_intc 2>,
-						<0 0 0 4 &pcie1_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 59>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
-						<0 0 0 2 &pcie2_intc 1>,
-						<0 0 0 3 &pcie2_intc 2>,
-						<0 0 0 4 &pcie2_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-
-				pcie2_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 60>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
-						<0 0 0 2 &pcie3_intc 1>,
-						<0 0 0 3 &pcie3_intc 2>,
-						<0 0 0 4 &pcie3_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-
-				pcie3_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 61>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
-						<0 0 0 2 &pcie4_intc 1>,
-						<0 0 0 3 &pcie4_intc 2>,
-						<0 0 0 4 &pcie4_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-
-				pcie4_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 62>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
-						<0 0 0 2 &pcie5_intc 1>,
-						<0 0 0 3 &pcie5_intc 2>,
-						<0 0 0 4 &pcie5_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-
-				pcie5_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie6: pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 63>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
-						<0 0 0 2 &pcie6_intc 1>,
-						<0 0 0 3 &pcie6_intc 2>,
-						<0 0 0 4 &pcie6_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-
-				pcie6_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie7: pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 64>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
-						<0 0 0 2 &pcie7_intc 1>,
-						<0 0 0 3 &pcie7_intc 2>,
-						<0 0 0 4 &pcie7_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-
-				pcie7_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie8: pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 65>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
-						<0 0 0 2 &pcie8_intc 1>,
-						<0 0 0 3 &pcie8_intc 2>,
-						<0 0 0 4 &pcie8_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-
-				pcie8_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie9: pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 99>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
-						<0 0 0 2 &pcie9_intc 1>,
-						<0 0 0 3 &pcie9_intc 2>,
-						<0 0 0 4 &pcie9_intc 3>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-
-				pcie9_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie10: pcie@a,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-				reg = <0x5000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				interrupt-names = "intx";
-				interrupts-extended = <&mpic 103>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie10_intc 0>,
-						<0 0 0 2 &pcie10_intc 1>,
-						<0 0 0 3 &pcie10_intc 2>,
-						<0 0 0 4 &pcie10_intc 3>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 27>;
-				status = "disabled";
-
-				pcie10_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-xp-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78460-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
deleted file mode 100644
index 31933f81144ea..0000000000000
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ /dev/null
@@ -1,357 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for NETGEAR ReadyNAS 2120
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 2120";
-	compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
-
-		internal-regs {
-
-			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
-			rtc@10300 {
-				status = "disabled";
-			};
-
-			i2c@11000 {
-				clock-frequency = <400000>;
-				status = "okay";
-
-				/* Controller for rear fan #1 of 3 (Protechnic
-				 * MGT4012XB-O20, 8000RPM) near eSATA port */
-				g762_fan1: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/*  Controller for rear (center) fan #2 of 3 */
-				g762_fan2: g762@48 {
-					compatible = "gmt,g762";
-					reg = <0x48>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/*  Controller for rear fan #3 of 3 */
-				g762_fan3: g762@49 {
-					compatible = "gmt,g762";
-					reg = <0x49>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/* Temperature sensor */
-				g751: g751@4c {
-					compatible = "gmt,g751";
-					reg = <0x4c>;
-				};
-
-				isl12057: rtc@68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-					wakeup-source;
-				};
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			/* Front USB 2.0 port */
-			usb@50000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			/* Two rear eSATA ports */
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-		};
-	};
-
-	clocks {
-		g762_clk: g762-oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
-			     &sata3_led_pin &sata4_led_pin>;
-		pinctrl-names = "default";
-
-		red-sata1-led {
-			label = "rn2120:red:sata1";
-			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata2-led {
-			label = "rn2120:red:sata2";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata3-led {
-			label = "rn2120:red:sata3";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata4-led {
-			label = "rn2120:red:sata4";
-			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-err-led {
-			label = "rn2120:red:err";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin &reset_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* Connected to first Marvell 88SE9170 SATA controller */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* Connected to second Marvell 88SE9170 SATA controller */
-	pcie@2,0 {
-		/* Port 0, Lane 1 */
-		status = "okay";
-	};
-
-	/* Connected to Fresco Logic FL1009 USB 3.0 controller */
-	pcie@5,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-		reg = <1>;
-	};
-};
-
-
-&pinctrl {
-	poweroff: poweroff {
-		marvell,pins = "mpp42";
-		marvell,function = "gpio";
-	};
-
-	power_button_pin: power-button-pin {
-		marvell,pins = "mpp27";
-		marvell,function = "gpio";
-	};
-
-	reset_button_pin: reset-button-pin {
-		marvell,pins = "mpp41";
-		marvell,function = "gpio";
-	};
-
-	sata1_led_pin: sata1-led-pin {
-		marvell,pins = "mpp31";
-		marvell,function = "gpio";
-	};
-
-	sata2_led_pin: sata2-led-pin {
-		marvell,pins = "mpp40";
-		marvell,function = "gpio";
-	};
-
-	sata3_led_pin: sata3-led-pin {
-		marvell,pins = "mpp44";
-		marvell,function = "gpio";
-	};
-
-	sata4_led_pin: sata4-led-pin {
-		marvell,pins = "mpp47";
-		marvell,function = "gpio";
-	};
-
-	sata1_power_pin: sata1-power-pin {
-		marvell,pins = "mpp24";
-		marvell,function = "gpio";
-	};
-
-	sata2_power_pin: sata2-power-pin {
-		marvell,pins = "mpp25";
-		marvell,function = "gpio";
-	};
-
-	sata3_power_pin: sata3-power-pin {
-		marvell,pins = "mpp26";
-		marvell,function = "gpio";
-	};
-
-	sata4_power_pin: sata4-power-pin {
-		marvell,pins = "mpp28";
-		marvell,function = "gpio";
-	};
-
-	sata1_pres_pin: sata1-pres-pin {
-		marvell,pins = "mpp32";
-		marvell,function = "gpio";
-	};
-
-	sata2_pres_pin: sata2-pres-pin {
-		marvell,pins = "mpp33";
-		marvell,function = "gpio";
-	};
-
-	sata3_pres_pin: sata3-pres-pin {
-		marvell,pins = "mpp34";
-		marvell,function = "gpio";
-	};
-
-	sata4_pres_pin: sata4-pres-pin {
-		marvell,pins = "mpp35";
-		marvell,function = "gpio";
-	};
-
-	err_led_pin: err-led-pin {
-		marvell,pins = "mpp45";
-		marvell,function = "gpio";
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-
-		/* Use Hardware BCH ECC */
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x180000>;  /* 1.5MB */
-				read-only;
-			};
-
-			partition@180000 {
-				label = "u-boot-env";
-				reg = <0x180000 0x20000>;    /* 128KB */
-				read-only;
-			};
-
-			partition@200000 {
-				label = "uImage";
-				reg = <0x0200000 0x600000>;    /* 6MB */
-			};
-
-			partition@800000 {
-				label = "minirootfs";
-				reg = <0x0800000 0x400000>;    /* 4MB */
-			};
-
-			/* Last MB is for the BBT, i.e. not writable */
-			partition@c00000 {
-				label = "ubifs";
-				reg = <0x0c00000 0x7400000>; /* 116MB */
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
deleted file mode 100644
index 1ecf72a61bcad..0000000000000
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ /dev/null
@@ -1,209 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for OpenBlocks AX3-4 board
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-xp-mv78260.dtsi"
-
-/ {
-	model = "PlatHome OpenBlocks AX3-4 board";
-	compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 128 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x8000000>;
-				bank-width = <2>;
-			};
-		};
-
-		internal-regs {
-			rtc@10300 {
-				/* No crystal connected to the internal RTC */
-				status = "disabled";
-			};
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-
-			leds {
-				compatible = "gpio-leds";
-				pinctrl-names = "default";
-				pinctrl-0 = <&led_pins>;
-
-				red_led {
-					label = "red_led";
-					gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				yellow_led {
-					label = "yellow_led";
-					gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				green_led {
-					label = "green_led";
-					gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-					default-state = "keep";
-				};
-			};
-
-			gpio-keys {
-				compatible = "gpio-keys";
-
-				button-init {
-					label = "Init Button";
-					linux,code = <KEY_POWER>;
-					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <1>;
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <3>;
-			};
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <400000>;
-			};
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <400000>;
-
-				s35390a: s35390a@30 {
-					compatible = "s35390a";
-					reg = <0x30>;
-				};
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			/* Front side USB 0 */
-			usb@50000 {
-				status = "okay";
-			};
-
-			/* Front side USB 1 */
-			usb@51000 {
-				status = "okay";
-			};
-
-			bm@c0000 {
-				status = "okay";
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-	/* Internal mini-PCIe connector */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-
-	phy2: ethernet-phy@2 {
-		reg = <2>;
-	};
-
-	phy3: ethernet-phy@3 {
-		reg = <3>;
-	};
-};
-
-&pinctrl {
-	led_pins: led-pins-0 {
-		marvell,pins = "mpp49", "mpp51", "mpp53";
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
deleted file mode 100644
index 5551bac1962c2..0000000000000
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ /dev/null
@@ -1,328 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Synology DS414
- *
- * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the old 0xd0000000).
- * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
- * bootloaders provided by Marvell. It is used in recent versions of
- * DSM software provided by Synology. Nonetheless, some earlier boards
- * were delivered with an older version of u-boot that left internal
- * registers mapped at 0xd0000000. If you have such a device you will
- * not be able to directly boot a kernel based on this Device Tree. In
- * that case, the preferred solution is to update your bootloader (e.g.
- * by upgrading to latest version of DSM, or building a new one and
- * installing it from u-boot prompt) or adjust the Devive Tree
- * (s/0xf1000000/0xd0000000/ in 'ranges' below).
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Synology DS414";
-	compatible = "synology,ds414", "marvell,armadaxp-mv78230",
-		     "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x40000000>; /* 1GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
-
-		internal-regs {
-
-			/* RTC is provided by Seiko S-35390A below */
-			rtc@10300 {
-				status = "disabled";
-			};
-
-			i2c@11000 {
-				clock-frequency = <400000>;
-				status = "okay";
-
-				s35390a: s35390a@30 {
-					 compatible = "sii,s35390a";
-					 reg = <0x30>;
-				};
-			};
-
-			/* Connected to a header on device's PCB. This
-			 * provides the main console for the device.
-			 *
-			 * Warning: the device may not boot with a 3.3V
-			 * USB-serial converter connected when the power
-			 * button is pressed. The converter needs to be
-			 * connected a few seconds after pressing the
-			 * power button. This is possibly due to UART0_TXD
-			 * pin being sampled at reset (bit 0 of SAR).
-			 */
-			serial@12000 {
-				status = "okay";
-			};
-
-			/* Connected to a Microchip PIC16F883 for power control */
-			serial@12100 {
-				status = "okay";
-			};
-
-			poweroff@12100 {
-				compatible = "synology,power-off";
-				reg = <0x12100 0x100>;
-				clocks = <&coreclk 0>;
-			};
-
-			/* Front USB 2.0 port */
-			usb@50000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
-			     &sata3_pwr_pin &sata4_pwr_pin>;
-		pinctrl-names = "default";
-
-		sata1_regulator: sata1-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata2_regulator: sata2-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA2 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata3_regulator: sata3-regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "SATA3 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <6000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata4_regulator: sata4-regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "SATA4 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <8000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/*
-	 * Connected to Marvell 88SX7042 SATA-II controller
-	 * handling the four disks.
-	 */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/*
-	 * Connected to EtronTech EJ168A XHCI controller
-	 * providing the two rear USB 3.0 ports.
-	 */
-	pcie@5,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-
-&mdio {
-	phy0: ethernet-phy@0 { /* Marvell 88E1512 */
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
-		reg = <1>;
-	};
-};
-
-&pinctrl {
-	sata1_pwr_pin: sata1-pwr-pin {
-		marvell,pins = "mpp42";
-		marvell,function = "gpio";
-	};
-
-	sata2_pwr_pin: sata2-pwr-pin {
-		marvell,pins = "mpp44";
-		marvell,function = "gpio";
-	};
-
-	sata3_pwr_pin: sata3-pwr-pin {
-		marvell,pins = "mpp45";
-		marvell,function = "gpio";
-	};
-
-	sata4_pwr_pin: sata4-pwr-pin {
-		marvell,pins = "mpp46";
-		marvell,function = "gpio";
-	};
-
-	sata1_pres_pin: sata1-pres-pin {
-		marvell,pins = "mpp34";
-		marvell,function = "gpio";
-	};
-
-	sata2_pres_pin: sata2-pres-pin {
-		marvell,pins = "mpp35";
-		marvell,function = "gpio";
-	};
-
-	sata3_pres_pin: sata3-pres-pin {
-		marvell,pins = "mpp40";
-		marvell,function = "gpio";
-	};
-
-	sata4_pres_pin: sata4-pres-pin {
-		marvell,pins = "mpp41";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit0_pin: syno-id-bit0-pin {
-		marvell,pins = "mpp26";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit1_pin: syno-id-bit1-pin {
-		marvell,pins = "mpp28";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit2_pin: syno-id-bit2-pin {
-		marvell,pins = "mpp29";
-		marvell,function = "gpio";
-	};
-
-	fan1_alarm_pin: fan1-alarm-pin {
-		marvell,pins = "mpp33";
-		marvell,function = "gpio";
-	};
-
-	fan2_alarm_pin: fan2-alarm-pin {
-		marvell,pins = "mpp32";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q064", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <20000000>;
-
-		/*
-		 * Warning!
-		 *
-		 * Synology u-boot uses its compiled-in environment
-		 * and it seems Synology did not care to change u-boot
-		 * default configuration in order to allow saving a
-		 * modified environment at a sensible location. So,
-		 * if you do a 'saveenv' under u-boot, your modified
-		 * environment will be saved at 1MB after the start
-		 * of the flash, i.e. in the middle of the uImage.
-		 * For that reason, it is strongly advised not to
-		 * change the default environment, unless you know
-		 * what you are doing.
-		 */
-		partition@0 { /* u-boot */
-			label = "RedBoot";
-			reg = <0x00000000 0x000d0000>; /* 832KB */
-		};
-
-		partition@c0000 { /* uImage */
-			label = "zImage";
-			reg = <0x000d0000 0x002d0000>; /* 2880KB */
-		};
-
-		partition@3a0000 { /* uInitramfs */
-			label = "rd.gz";
-			reg = <0x003a0000 0x00430000>; /* 4250KB */
-		};
-
-		partition@7d0000 { /* MAC address and serial number */
-			label = "vendor";
-			reg = <0x007d0000 0x00010000>; /* 64KB */
-		};
-
-		partition@7e0000 {
-			label = "RedBoot config";
-			reg = <0x007e0000 0x00010000>; /* 64KB */
-		};
-
-		partition@7f0000 {
-			label = "FIS directory";
-			reg = <0x007f0000 0x00010000>; /* 64KB */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
deleted file mode 100644
index 4297482da62ff..0000000000000
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ /dev/null
@@ -1,345 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Ben Dooks <ben.dooks@codethink.co.uk>
- *
- * Contains definitions specific to the Armada XP SoC that are not
- * common to all Armada SoCs.
- */
-
-#include "armada-370-xp.dtsi"
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	model = "Marvell Armada XP family SoC";
-	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	soc {
-		compatible = "marvell,armadaxp-mbus", "simple-bus";
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
-		};
-
-		internal-regs {
-			sdramc: sdramc@1400 {
-				compatible = "marvell,armada-xp-sdram-controller";
-				reg = <0x1400 0x500>;
-			};
-
-			L2: l2-cache@8000 {
-				compatible = "marvell,aurora-system-cache";
-				reg = <0x08000 0x1000>;
-				cache-id-part = <0x100>;
-				cache-level = <2>;
-				cache-unified;
-				wt-override;
-			};
-
-			uart2: serial@12200 {
-				compatible = "snps,dw-apb-uart";
-				pinctrl-0 = <&uart2_pins>;
-				pinctrl-names = "default";
-				reg = <0x12200 0x100>;
-				reg-shift = <2>;
-				interrupts = <43>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			uart3: serial@12300 {
-				compatible = "snps,dw-apb-uart";
-				pinctrl-0 = <&uart3_pins>;
-				pinctrl-names = "default";
-				reg = <0x12300 0x100>;
-				reg-shift = <2>;
-				interrupts = <44>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			systemc: system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x500>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-xp-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			coreclk: mvebu-sar@18230 {
-				compatible = "marvell,armada-xp-core-clock";
-				reg = <0x18230 0x08>;
-				#clock-cells = <1>;
-			};
-
-			thermal: thermal@182b0 {
-				compatible = "marvell,armadaxp-thermal";
-				reg = <0x182b0 0x4
-					0x184d0 0x4>;
-				status = "okay";
-			};
-
-			cpuclk: clock-complex@18700 {
-				#clock-cells = <1>;
-				compatible = "marvell,armada-xp-cpu-clock";
-				reg = <0x18700 0x24>, <0x1c054 0x10>;
-				clocks = <&coreclk 1>;
-			};
-
-			cpu-config@21000 {
-				compatible = "marvell,armada-xp-cpu-config";
-				reg = <0x21000 0x8>;
-			};
-
-			eth2: ethernet@30000 {
-				compatible = "marvell,armada-xp-neta";
-				reg = <0x30000 0x4000>;
-				interrupts = <12>;
-				clocks = <&gateclk 2>;
-				status = "disabled";
-			};
-
-			usb2: usb@52000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x52000 0x500>;
-				interrupts = <47>;
-				clocks = <&gateclk 20>;
-				status = "disabled";
-			};
-
-			xor1: xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <51>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <52>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			ethernet@70000 {
-				compatible = "marvell,armada-xp-neta";
-			};
-
-			ethernet@74000 {
-				compatible = "marvell,armada-xp-neta";
-			};
-
-			cesa: crypto@90000 {
-				compatible = "marvell,armada-xp-crypto";
-				reg = <0x90000 0x10000>;
-				reg-names = "regs";
-				interrupts = <48>, <49>;
-				clocks = <&gateclk 23>, <&gateclk 23>;
-				clock-names = "cesa0", "cesa1";
-				marvell,crypto-srams = <&crypto_sram0>,
-						       <&crypto_sram1>;
-				marvell,crypto-sram-size = <0x800>;
-			};
-
-			bm: bm@c0000 {
-				compatible = "marvell,armada-380-neta-bm";
-				reg = <0xc0000 0xac>;
-				clocks = <&gateclk 13>;
-				internal-mem = <&bm_bppi>;
-				status = "disabled";
-			};
-
-			xor0: xor@f0900 {
-				compatible = "marvell,orion-xor";
-				reg = <0xF0900 0x100
-				       0xF0B00 0x100>;
-				clocks = <&gateclk 28>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <94>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <95>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-		};
-
-		crypto_sram0: sa-sram0 {
-			compatible = "mmio-sram";
-			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
-			clocks = <&gateclk 23>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
-		};
-
-		crypto_sram1: sa-sram1 {
-			compatible = "mmio-sram";
-			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
-			clocks = <&gateclk 23>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
-		};
-
-		bm_bppi: bm-bppi {
-			compatible = "mmio-sram";
-			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
-			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&gateclk 13>;
-			no-memory-wc;
-			status = "disabled";
-		};
-	};
-
-	clocks {
-		/* 25 MHz reference crystal */
-		refclk: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-};
-
-&i2c0 {
-	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-	reg = <0x11000 0x100>;
-};
-
-&i2c1 {
-	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-	reg = <0x11100 0x100>;
-};
-
-&mpic {
-	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-};
-
-&timer {
-	compatible = "marvell,armada-xp-timer";
-	clocks = <&coreclk 2>, <&refclk>;
-	clock-names = "nbclk", "fixed";
-};
-
-&watchdog {
-	compatible = "marvell,armada-xp-wdt";
-	clocks = <&coreclk 2>, <&refclk>;
-	clock-names = "nbclk", "fixed";
-	interrupts = <93>, <38>;
-};
-
-&cpurst {
-	reg = <0x20800 0x20>;
-};
-
-&usb0 {
-	clocks = <&gateclk 18>;
-};
-
-&usb1 {
-	clocks = <&gateclk 19>;
-};
-
-&pinctrl {
-	ge0_gmii_pins: ge0-gmii-pins {
-		marvell,pins =
-		     "mpp0",  "mpp1",  "mpp2",  "mpp3",
-		     "mpp4",  "mpp5",  "mpp6",  "mpp7",
-		     "mpp8",  "mpp9",  "mpp10", "mpp11",
-		     "mpp12", "mpp13", "mpp14", "mpp15",
-		     "mpp16", "mpp17", "mpp18", "mpp19",
-		     "mpp20", "mpp21", "mpp22", "mpp23";
-		marvell,function = "ge0";
-	};
-
-	ge0_rgmii_pins: ge0-rgmii-pins {
-		marvell,pins =
-		     "mpp0", "mpp1", "mpp2", "mpp3",
-		     "mpp4", "mpp5", "mpp6", "mpp7",
-		     "mpp8", "mpp9", "mpp10", "mpp11";
-		marvell,function = "ge0";
-	};
-
-	ge1_rgmii_pins: ge1-rgmii-pins {
-		marvell,pins =
-		     "mpp12", "mpp13", "mpp14", "mpp15",
-		     "mpp16", "mpp17", "mpp18", "mpp19",
-		     "mpp20", "mpp21", "mpp22", "mpp23";
-		marvell,function = "ge1";
-	};
-
-	sdio_pins: sdio-pins {
-		marvell,pins = "mpp30", "mpp31", "mpp32",
-			       "mpp33", "mpp34", "mpp35";
-		marvell,function = "sd0";
-	};
-
-	spi0_pins: spi0-pins {
-		marvell,pins = "mpp36", "mpp37",
-			       "mpp38", "mpp39";
-		marvell,function = "spi0";
-	};
-
-	spi1_pins: spi1-pins {
-		marvell,pins = "mpp13", "mpp14",
-			       "mpp16", "mpp17";
-		marvell,function = "spi1";
-	};
-
-	uart2_pins: uart2-pins {
-		marvell,pins = "mpp42", "mpp43";
-		marvell,function = "uart2";
-	};
-
-	uart3_pins: uart3-pins {
-		marvell,pins = "mpp44", "mpp45";
-		marvell,function = "uart3";
-	};
-};
-
-&spi0 {
-	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
-	pinctrl-0 = <&spi0_pins>;
-	pinctrl-names = "default";
-};
-
-&spi1 {
-	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
-	pinctrl-0 = <&spi1_pins>;
-	pinctrl-names = "default";
-};
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
deleted file mode 100644
index 042a9cc920c67..0000000000000
--- a/arch/arm/boot/dts/artpec6-devboard.dts
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Axis ARTPEC-6 development board.
-
-/dts-v1/;
-#include "artpec6.dtsi"
-
-/ {
-	model = "ARTPEC-6 development board";
-	compatible = "axis,artpec6-dev-board", "axis,artpec6";
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial3:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&ethernet {
-	status = "okay";
-
-	phy-handle = <&phy1>;
-	phy-mode = "gmii";
-
-	mdio {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		compatible = "snps,dwmac-mdio";
-		phy1: phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			device_type = "ethernet-phy";
-			reg = <0x0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
deleted file mode 100644
index 037157e6c5ee3..0000000000000
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ /dev/null
@@ -1,388 +0,0 @@
-/*
- * Device Tree Source for the Axis ARTPEC-6 SoC
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/dma/nbpfaxi.h>
-#include <dt-bindings/clock/axis,artpec6-clkctrl.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "axis,artpec6";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			next-level-cache = <&pl310>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			next-level-cache = <&pl310>;
-		};
-	};
-
-	syscon: syscon@f8000000 {
-		compatible = "axis,artpec6-syscon", "syscon";
-		reg = <0xf8000000 0x48>;
-	};
-
-	psci {
-		compatible = "arm,psci-0.2", "arm,psci";
-		method = "smc";
-		psci_version = <0x84000000>;
-		cpu_on = <0x84000003>;
-		system_reset = <0x84000009>;
-	};
-
-	scu@faf00000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0xfaf00000 0x58>;
-	};
-
-	/* Main external clock driving CPU and peripherals */
-	ext_clk: ext_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <50000000>;
-	};
-
-	eth_phy_ref_clk: eth_phy_ref_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-	};
-
-	clkctrl: clkctrl@f8000000 {
-		#clock-cells = <1>;
-		compatible = "axis,artpec6-clkctrl";
-		reg = <0xf8000000 0x48>;
-		clocks = <&ext_clk>;
-		clock-names = "sys_refclk";
-	};
-
-	gtimer@faf00200 {
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0xfaf00200 0x20>;
-		interrupts = <GIC_PPI 11 0xf01>;
-		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
-	};
-
-	timer@faf00600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0xfaf00600 0x20>;
-		interrupts = <GIC_PPI 13 0xf04>;
-		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
-		status = "disabled";
-	};
-
-	intc: interrupt-controller@faf01000 {
-		interrupt-controller;
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >;
-	};
-
-	pl310: cache-controller@faf10000 {
-		compatible = "arm,pl310-cache";
-		cache-unified;
-		cache-level = <2>;
-		reg = <0xfaf10000 0x1000>;
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-		arm,data-latency = <1 1 1>;
-		arm,tag-latency = <1 1 1>;
-		arm,filter-ranges = <0x0 0x80000000>;
-		arm,double-linefill = <1>;
-		arm,double-linefill-incr = <0>;
-		arm,double-linefill-wrap = <0>;
-		prefetch-data = <1>;
-		prefetch-instr = <1>;
-		arm,prefetch-offset = <0>;
-		arm,prefetch-drop = <1>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	/*
-	 * Both pci nodes cannot be enabled at the same time,
-	 * leave the unwanted node as disabled.
-	 */
-	pcie: pcie@f8050000 {
-		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
-		reg = <0xf8050000 0x2000
-		       0xf8040000 0x1000
-		       0xc0000000 0x2000>;
-		reg-names = "dbi", "phy", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-			  /* downstream I/O */
-		ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
-			  /* non-prefetchable memory */
-			  0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
-		num-lanes = <2>;
-		bus-range = <0x00 0xff>;
-		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-		axis,syscon-pcie = <&syscon>;
-		status = "disabled";
-	};
-
-	pcie_ep: pcie_ep@f8050000 {
-		compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie";
-		reg = <0xf8050000 0x2000
-		       0xf8051000 0x2000
-		       0xf8040000 0x1000
-		       0xc0000000 0x20000000>;
-		reg-names = "dbi", "dbi2", "phy", "addr_space";
-		num-ib-windows = <6>;
-		num-ob-windows = <2>;
-		num-lanes = <2>;
-		axis,syscon-pcie = <&syscon>;
-		status = "disabled";
-	};
-
-	pinctrl: pinctrl@f801d000 {
-		compatible = "axis,artpec6-pinctrl";
-		reg = <0xf801d000 0x400>;
-
-		pinctrl_uart0: uart0grp {
-			function = "uart0";
-			groups = "uart0grp2";
-			bias-pull-up;
-		};
-		pinctrl_uart1: uart1grp {
-			function = "uart1";
-			groups = "uart1grp0";
-			bias-pull-up;
-		};
-		pinctrl_uart2: uart2grp {
-			function = "uart2";
-			groups = "uart2grp1";
-			bias-pull-up;
-		};
-		pinctrl_uart3: uart3grp {
-			function = "uart3";
-			groups = "uart3grp0";
-			bias-pull-up;
-		};
-	};
-
-	amba@0 {
-		compatible = "simple-bus";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-		dma-ranges;
-
-		crypto@f4264000 {
-			compatible = "axis,artpec6-crypto";
-			reg = <0xf4264000 0x4000>;
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		dma0: dma@f8019000 {
-			compatible = "renesas,nbpfaxi64dmac8b16";
-			reg = <0xf8019000 0x400>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
-				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch12",
-					  "ch12", "ch13", "ch14", "ch15";
-			clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
-			#dma-cells = <2>;
-			dma-channels = <8>;
-			dma-requests = <8>;
-		};
-		dma1: dma@f8019400 {
-			compatible = "renesas,nbpfaxi64dmac8b16";
-			reg = <0xf8019400 0x400>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
-				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch12",
-					  "ch12", "ch13", "ch14", "ch15";
-			clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
-			#dma-cells = <2>;
-			dma-channels = <8>;
-			dma-requests = <8>;
-		};
-
-		ethernet: ethernet@f8010000 {
-			clock-names = "stmmaceth", "ptp_ref";
-			clocks = <&clkctrl ARTPEC6_CLK_ETH_ACLK>,
-				<&clkctrl ARTPEC6_CLK_PTP_REF>;
-			compatible = "snps,dwmac-4.10a", "snps,dwmac";
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq", "eth_lpi";
-			reg = <0xf8010000 0x4000>;
-
-			snps,axi-config = <&stmmac_axi_setup>;
-			snps,mtl-rx-config = <&mtl_rx_setup>;
-			snps,mtl-tx-config = <&mtl_tx_setup>;
-
-			snps,txpbl = <8>;
-			snps,rxpbl = <2>;
-			snps,aal;
-			snps,tso;
-
-			status = "disabled";
-
-			stmmac_axi_setup: stmmac-axi-config {
-				snps,wr_osr_lmt = <1>;
-				snps,rd_osr_lmt = <15>;
-				/* If FB is disabled, the AXI master chooses
-				 * a burst length of any value less than the
-				 * maximum enabled burst length
-				 * (all lesser burst length enables are redundant).
-				 */
-				snps,blen = <0 0 0 0 16 0 0>;
-			};
-
-			mtl_rx_setup: rx-queues-config {
-				snps,rx-queues-to-use = <1>;
-				queue0 {};
-			};
-
-			mtl_tx_setup: tx-queues-config {
-				snps,tx-queues-to-use = <2>;
-				queue0 {};
-				queue1 {};
-			};
-		};
-
-		uart0: serial@f8036000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xf8036000 0x1000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
-				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
-			clock-names = "uart_clk", "apb_pclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart0>;
-			dmas = <&dma0 4 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
-			       <&dma0 5 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-		uart1: serial@f8037000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xf8037000 0x1000>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
-				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
-			clock-names = "uart_clk", "apb_pclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart1>;
-			dmas = <&dma0 6 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
-			       <&dma0 7 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-		uart2: serial@f8038000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xf8038000 0x1000>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
-				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
-			clock-names = "uart_clk", "apb_pclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart2>;
-			dmas = <&dma1 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
-			       <&dma1 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-		uart3: serial@f8039000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xf8039000 0x1000>;
-			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
-				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
-			clock-names = "uart_clk", "apb_pclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart3>;
-			dmas = <&dma1 2 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
-			       <&dma1 3 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
deleted file mode 100644
index a497dd135491b..0000000000000
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ /dev/null
@@ -1,135 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-
-/ {
-	model = "AST2500 EVB";
-	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
-
-	aliases {
-		serial4 = &uart5;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&spi2 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c3 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	lm75@4d {
-		compatible = "national,lm75";
-		reg = <0x4d>;
-	};
-};
-
-&sdmmc {
-	status = "okay";
-};
-
-&sdhci0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sd1_default>;
-};
-
-/*
- * Enable port A as device (via the virtual hub) and port B as
- * host by default on the eval board. This can be easily changed
- * by replacing the override below with &ehci0 { ... } to enable
- * host on both ports.
- */
-&vhub {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&gfx {
-     status = "okay";
-     memory-region = <&gfx_memory>;
-};
-
-&rtc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
deleted file mode 100644
index f34a2b1ec2f0f..0000000000000
--- a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2021 IBM Corp.
-
-#include "aspeed-ast2600-evb.dts"
-
-/ {
-	model = "AST2600 A1 EVB";
-	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600-evb", "aspeed,ast2600";
-
-	/delete-node/regulator-vcc-sdhci0;
-	/delete-node/regulator-vcc-sdhci1;
-	/delete-node/regulator-vccq-sdhci0;
-	/delete-node/regulator-vccq-sdhci1;
-};
-
-/delete-node/ &sdc;
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
deleted file mode 100644
index de83c0eb1d6ed..0000000000000
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ /dev/null
@@ -1,350 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2019 IBM Corp.
-
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "AST2600 EVB";
-	compatible = "aspeed,ast2600-evb", "aspeed,ast2600";
-
-	aliases {
-		serial4 = &uart5;
-	};
-
-	chosen {
-		bootargs = "console=ttyS4,115200n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		video_engine_memory: video {
-			size = <0x04000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	vcc_sdhci0: regulator-vcc-sdhci0 {
-		compatible = "regulator-fixed";
-		regulator-name = "SDHCI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpios = <&gpio0 ASPEED_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhci0: regulator-vccq-sdhci0 {
-		compatible = "regulator-gpio";
-		regulator-name = "SDHCI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>,
-			 <1800000 0>;
-	};
-
-	vcc_sdhci1: regulator-vcc-sdhci1 {
-		compatible = "regulator-fixed";
-		regulator-name = "SDHCI1 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhci1: regulator-vccq-sdhci1 {
-		compatible = "regulator-gpio";
-		regulator-name = "SDHCI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		gpios = <&gpio0 ASPEED_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>,
-			 <1800000 0>;
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&mdio1 {
-	status = "okay";
-
-	ethphy1: ethernet-phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&mdio2 {
-	status = "okay";
-
-	ethphy2: ethernet-phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&mdio3 {
-	status = "okay";
-
-	ethphy3: ethernet-phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&mac0 {
-	status = "okay";
-
-	phy-mode = "rgmii-rxid";
-	phy-handle = <&ethphy0>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii1_default>;
-};
-
-
-&mac1 {
-	status = "okay";
-
-	phy-mode = "rgmii-rxid";
-	phy-handle = <&ethphy1>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default>;
-};
-
-&mac2 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy2>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii3_default>;
-};
-
-&mac3 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy3>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii4_default>;
-};
-
-&emmc_controller {
-	status = "okay";
-};
-
-&emmc {
-	non-removable;
-	bus-width = <4>;
-	max-frequency = <100000000>;
-	clk-phase-mmc-hs200 = <9>, <225>;
-};
-
-&rtc {
-	status = "okay";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-64.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&uart5 {
-	// Workaround for A0
-	compatible = "snps,dw-apb-uart";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-
-	temp@2e {
-		compatible = "adi,adt7490";
-		reg = <0x2e>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	lm75@4d {
-		compatible = "national,lm75";
-		reg = <0x4d>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&i2c14 {
-	status = "okay";
-};
-
-&i2c15 {
-	status = "okay";
-};
-
-&fsim0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&sdc {
-	status = "okay";
-};
-
-/*
- * The signal voltage of sdhci0 and sdhci1 on AST2600-A2 EVB is able to be
- * toggled by GPIO pins.
- * In the reference design, GPIOV0 of AST2600-A2 EVB is connected to the
- * power load switch that provides 3.3v to sdhci0 vdd, GPIOV1 is connected to
- * a 1.8v and a 3.3v power load switch that provides signal voltage to
- * sdhci0 bus.
- * If GPIOV0 is active high, sdhci0 is enabled, otherwise, sdhci0 is disabled.
- * If GPIOV1 is active high, 3.3v power load switch is enabled, sdhci0 signal
- * voltage is 3.3v, otherwise, 1.8v power load switch will be enabled,
- * sdhci0 signal voltage becomes 1.8v.
- * AST2600-A2 EVB also supports toggling signal voltage for sdhci1.
- * The design is the same as sdhci0, it uses GPIOV2 as power-gpio and GPIOV3
- * as power-switch-gpio.
- */
-&sdhci0 {
-	status = "okay";
-	bus-width = <4>;
-	max-frequency = <100000000>;
-	sdhci-drive-type = /bits/ 8 <3>;
-	sdhci-caps-mask = <0x7 0x0>;
-	sdhci,wp-inverted;
-	vmmc-supply = <&vcc_sdhci0>;
-	vqmmc-supply = <&vccq_sdhci0>;
-	clk-phase-sd-hs = <7>, <200>;
-};
-
-&sdhci1 {
-	status = "okay";
-	bus-width = <4>;
-	max-frequency = <100000000>;
-	sdhci-drive-type = /bits/ 8 <3>;
-	sdhci-caps-mask = <0x7 0x0>;
-	sdhci,wp-inverted;
-	vmmc-supply = <&vcc_sdhci1>;
-	vqmmc-supply = <&vccq_sdhci1>;
-	clk-phase-sd-hs = <7>, <200>;
-};
-
-&vhub {
-	status = "okay";
-	pinctrl-names = "default";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts b/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts
deleted file mode 100644
index 64bb9bf92de23..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts
+++ /dev/null
@@ -1,319 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "AMD DaytonaX BMC";
-	compatible = "amd,daytonax-bmc", "aspeed,ast2500";
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;	/* 32M */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	aliases {
-		serial0 = &uart1;
-		serial4 = &uart5;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-fault {
-			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		led-identify {
-			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
-			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
-			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>,
-			<&adc 15>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
-};
-
-&uart1 {
-	//Host Console
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		&pinctrl_rxd1_default
-		&pinctrl_nrts1_default
-		&pinctrl_ndtr1_default
-		&pinctrl_ndsr1_default
-		&pinctrl_ncts1_default
-		&pinctrl_ndcd1_default
-		&pinctrl_nri1_default>;
-};
-
-&uart5 {
-	//BMC Console
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-	aspeed,lpc-io-reg = <0x3f8>;
-	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-		&pinctrl_adc1_default
-		&pinctrl_adc2_default
-		&pinctrl_adc3_default
-		&pinctrl_adc4_default
-		&pinctrl_adc5_default
-		&pinctrl_adc6_default
-		&pinctrl_adc7_default
-		&pinctrl_adc8_default
-		&pinctrl_adc9_default
-		&pinctrl_adc10_default
-		&pinctrl_adc11_default
-		&pinctrl_adc12_default
-		&pinctrl_adc13_default
-		&pinctrl_adc14_default
-		&pinctrl_adc15_default>;
-};
-
-&gpio {
-	status = "okay";
-	gpio-line-names =
-	/*A0-A7*/	"","","led-fault","led-identify","","","","",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"id-button","","","","","","","",
-	/*D0-D7*/	"","","ASSERT_BMC_READY","","","","","",
-	/*E0-E7*/	"reset-button","reset-control","power-button","power-control","",
-			"power-good","power-ok","",
-	/*F0-F7*/	"","","","","","","BATTERY_DETECT","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","","","","","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"FM_BMC_READ_SPD_TEMP","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-};
-
-&lpc_snoop {
-	status = "okay";
-	snoop-ports = <0x80>, <0x81>;
-};
-
-&lpc_ctrl {
-	status = "okay";
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default
-		&pinctrl_pwm1_default
-		&pinctrl_pwm2_default
-		&pinctrl_pwm3_default
-		&pinctrl_pwm4_default
-		&pinctrl_pwm5_default
-		&pinctrl_pwm6_default
-		&pinctrl_pwm7_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@6 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-
-	fan@8 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@9 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-
-	fan@10 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
-	};
-
-	fan@11 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
-	};
-
-	fan@12 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
-	};
-
-	fan@13 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
-	};
-
-	fan@14 {
-		reg = <0x07>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
-	};
-
-	fan@15 {
-		reg = <0x07>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
-	};
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&vhub {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
deleted file mode 100644
index 6bded774c4575..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
+++ /dev/null
@@ -1,346 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2020 AMD Inc.
-// Author: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "AMD EthanolX BMC";
-	compatible = "amd,ethanolx-bmc", "aspeed,ast2500";
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;	/* 32M */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-
-	aliases {
-		serial0 = &uart1;
-		serial4 = &uart5;
-	};
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-	leds {
-		compatible = "gpio-leds";
-
-		fault {
-			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		identify {
-			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
-		};
-	};
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bios";
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-};
-
-&uart1 {
-	//Host Console
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default
-		     &pinctrl_nrts1_default
-		     &pinctrl_ncts1_default>;
-};
-
-&uart5 {
-	//BMC Console
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-		     &pinctrl_adc1_default
-		     &pinctrl_adc2_default
-		     &pinctrl_adc3_default
-		     &pinctrl_adc4_default>;
-};
-
-&gpio {
-	status = "okay";
-	gpio-line-names =
-	/*A0-A7*/	"","","FAULT_LED","CHASSIS_ID_LED","","","","",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","",
-	/*D0-D7*/	"HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S",
-			"JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD",
-	/*E0-E7*/	"","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN",
-			"MON_P0_PWR_GOOD","MON_PWROK","MON_RESET",
-	/*F0-F7*/	"MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP",
-			"MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","",
-	/*G0-G7*/	"BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0",
-			"P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","",
-	/*H0-H7*/	"BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3",
-			"PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN",
-			"ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT",
-			"ASSERT_CLR_CMOS","ASSERT_BMC_READY",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT",
-			"P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT",
-			"P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT",
-			"P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","","","","","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","SENSOR THERM","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-//APML for P0
-&i2c0 {
-	status = "okay";
-};
-
-//APML for P1
-&i2c1 {
-	status = "okay";
-};
-
-//FPGA
-&i2c2 {
-	status = "okay";
-};
-
-//24LC128 EEPROM
-&i2c3 {
-	status = "okay";
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <64>;
-	};
-};
-
-//P0 Power regulators
-&i2c4 {
-	status = "okay";
-};
-
-//P1 Power regulators
-&i2c5 {
-	status = "okay";
-};
-
-//P0/P1 Thermal diode
-&i2c6 {
-	status = "okay";
-};
-
-// Thermal Sensors
-&i2c7 {
-	status = "okay";
-
-	lm75a@48 {
-		compatible = "national,lm75a";
-		reg = <0x48>;
-	};
-
-	lm75a@49 {
-		compatible = "national,lm75a";
-		reg = <0x49>;
-	};
-
-	lm75a@4a {
-		compatible = "national,lm75a";
-		reg = <0x4a>;
-	};
-
-	lm75a@4b {
-		compatible = "national,lm75a";
-		reg = <0x4b>;
-	};
-
-	lm75a@4c {
-		compatible = "national,lm75a";
-		reg = <0x4c>;
-	};
-
-	lm75a@4d {
-		compatible = "national,lm75a";
-		reg = <0x4d>;
-	};
-
-	lm75a@4e {
-		compatible = "national,lm75a";
-		reg = <0x4e>;
-	};
-
-	lm75a@4f {
-		compatible = "national,lm75a";
-		reg = <0x4f>;
-	};
-};
-
-//BMC I2C
-&i2c8 {
-	status = "okay";
-};
-
-&kcs1 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0x60>;
-};
-
-&kcs2 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0x62>;
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xCA2>;
-};
-
-&kcs4 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0x97DE>;
-};
-
-&lpc_snoop {
-	status = "okay";
-	snoop-ports = <0x80>, <0x81>;
-};
-
-&lpc_ctrl {
-	//Enable lpc clock
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-	aspeed,lpc-io-reg = <0x3f8>;
-	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default
-	&pinctrl_pwm1_default
-	&pinctrl_pwm2_default
-	&pinctrl_pwm3_default
-	&pinctrl_pwm4_default
-	&pinctrl_pwm5_default
-	&pinctrl_pwm6_default
-	&pinctrl_pwm7_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@6 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x07>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&vhub {
-	status = "okay";
-};
-
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
deleted file mode 100644
index 0a51d2e32fabd..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ /dev/null
@@ -1,808 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Ampere Mt. Jade BMC";
-	compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
-
-	aliases {
-		/*
-		 *  i2c bus 50-57 assigned to NVMe slot 0-7
-		 */
-		i2c50 = &nvmeslot_0;
-		i2c51 = &nvmeslot_1;
-		i2c52 = &nvmeslot_2;
-		i2c53 = &nvmeslot_3;
-		i2c54 = &nvmeslot_4;
-		i2c55 = &nvmeslot_5;
-		i2c56 = &nvmeslot_6;
-		i2c57 = &nvmeslot_7;
-
-		/*
-		 *  i2c bus 60-67 assigned to NVMe slot 8-15
-		 */
-		i2c60 = &nvmeslot_8;
-		i2c61 = &nvmeslot_9;
-		i2c62 = &nvmeslot_10;
-		i2c63 = &nvmeslot_11;
-		i2c64 = &nvmeslot_12;
-		i2c65 = &nvmeslot_13;
-		i2c66 = &nvmeslot_14;
-		i2c67 = &nvmeslot_15;
-
-		/*
-		 *  i2c bus 70-77 assigned to NVMe slot 16-23
-		 */
-		i2c70 = &nvmeslot_16;
-		i2c71 = &nvmeslot_17;
-		i2c72 = &nvmeslot_18;
-		i2c73 = &nvmeslot_19;
-		i2c74 = &nvmeslot_20;
-		i2c75 = &nvmeslot_21;
-		i2c76 = &nvmeslot_22;
-		i2c77 = &nvmeslot_23;
-
-		/*
-		 *  i2c bus 80-81 assigned to NVMe M2 slot 0-1
-		 */
-		i2c80 = &nvme_m2_0;
-		i2c81 = &nvme_m2_1;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@9f000000 {
-			no-map;
-			reg = <0x9f000000 0x01000000>; /* 16M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;	/* 32M */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		fault {
-			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
-		};
-
-		identify {
-			gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpioA0mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-		mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>;
-	};
-
-	adc0mux: adc0mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 0>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc1mux: adc1mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 1>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc2mux: adc2mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 2>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc3mux: adc3mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 3>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc4mux: adc4mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 4>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc5mux: adc5mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 5>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc6mux: adc6mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 6>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc7mux: adc7mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 7>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc8mux: adc8mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 8>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc9mux: adc9mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 9>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc10mux: adc10mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 10>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc11mux: adc11mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 11>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc12mux: adc12mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 12>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc13mux: adc13mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 13>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc0mux 0>, <&adc0mux 1>,
-			<&adc1mux 0>, <&adc1mux 1>,
-			<&adc2mux 0>, <&adc2mux 1>,
-			<&adc3mux 0>, <&adc3mux 1>,
-			<&adc4mux 0>, <&adc4mux 1>,
-			<&adc5mux 0>, <&adc5mux 1>,
-			<&adc6mux 0>, <&adc6mux 1>,
-			<&adc7mux 0>, <&adc7mux 1>,
-			<&adc8mux 0>, <&adc8mux 1>,
-			<&adc9mux 0>, <&adc9mux 1>,
-			<&adc10mux 0>, <&adc10mux 1>,
-			<&adc11mux 0>, <&adc11mux 1>,
-			<&adc12mux 0>, <&adc12mux 1>,
-			<&adc13mux 0>, <&adc13mux 1>,
-			<&adc 14>, <&adc 15>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		/* spi-max-frequency = <50000000>; */
-#include "openbmc-flash-layout-64.dtsi"
-	};
-
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt-bmc";
-#include "openbmc-flash-layout-64-alt.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		/* spi-max-frequency = <100000000>; */
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			uefi@400000 {
-				reg = <0x400000 0x1C00000>;
-				label = "pnor-uefi";
-			};
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			 &pinctrl_rxd1_default
-			 &pinctrl_ncts1_default
-			 &pinctrl_nrts1_default>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-			 &pinctrl_rxd2_default>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default
-			 &pinctrl_rxd3_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-			 &pinctrl_rxd4_default>;
-};
-
-/* The BMC's uart */
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "okay";
-	ssif-bmc@10 {
-		compatible = "ssif-bmc";
-		reg = <0x10>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-	smpro@4f {
-		compatible = "ampere,smpro";
-		reg = <0x4f>;
-	};
-	smpro@4e {
-		compatible = "ampere,smpro";
-		reg = <0x4e>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-	eeprom@50 {
-		compatible = "microchip,24c64", "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	inlet_mem2: tmp175@28 {
-		compatible = "ti,tmp175";
-		reg = <0x28>;
-	};
-
-	inlet_cpu: tmp175@29 {
-		compatible = "ti,tmp175";
-		reg = <0x29>;
-	};
-
-	inlet_mem1: tmp175@2a {
-		compatible = "ti,tmp175";
-		reg = <0x2a>;
-	};
-
-	outlet_cpu: tmp175@2b {
-		compatible = "ti,tmp175";
-		reg = <0x2b>;
-	};
-
-	outlet1: tmp175@2c {
-		compatible = "ti,tmp175";
-		reg = <0x2c>;
-	};
-
-	outlet2: tmp175@2d {
-		compatible = "ti,tmp175";
-		reg = <0x2d>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-	rtc@51 {
-		compatible = "nxp,pcf85063a";
-		reg = <0x51>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		nvmeslot_0_7: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3>;
-		};
-	};
-
-	i2c-mux@71 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-		i2c-mux-idle-disconnect;
-
-		nvmeslot_8_15: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4>;
-		};
-
-		nvmeslot_16_23: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3>;
-		};
-
-	};
-
-	i2c-mux@72 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x72>;
-		i2c-mux-idle-disconnect;
-
-		nvme_m2_0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-		};
-
-		nvme_m2_1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1>;
-		};
-	};
-};
-
-&nvmeslot_0_7 {
-	status = "okay";
-
-	i2c-mux@75 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x75>;
-		i2c-mux-idle-disconnect;
-
-		nvmeslot_0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-		};
-		nvmeslot_1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1>;
-		};
-		nvmeslot_2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-		};
-		nvmeslot_3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3>;
-		};
-		nvmeslot_4: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4>;
-		};
-		nvmeslot_5: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x5>;
-		};
-		nvmeslot_6: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x6>;
-		};
-		nvmeslot_7: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x7>;
-		};
-
-	};
-};
-
-&nvmeslot_8_15 {
-	status = "okay";
-
-	i2c-mux@75 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x75>;
-		i2c-mux-idle-disconnect;
-
-		nvmeslot_8: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-		};
-		nvmeslot_9: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1>;
-		};
-		nvmeslot_10: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-		};
-		nvmeslot_11: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3>;
-		};
-		nvmeslot_12: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4>;
-		};
-		nvmeslot_13: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x5>;
-		};
-		nvmeslot_14: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x6>;
-		};
-		nvmeslot_15: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x7>;
-		};
-	};
-};
-
-&nvmeslot_16_23 {
-	status = "okay";
-
-	i2c-mux@75 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x75>;
-		i2c-mux-idle-disconnect;
-
-		nvmeslot_16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-		};
-		nvmeslot_17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1>;
-		};
-		nvmeslot_18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-		};
-		nvmeslot_19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3>;
-		};
-		nvmeslot_20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4>;
-		};
-		nvmeslot_21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x5>;
-		};
-		nvmeslot_22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x6>;
-		};
-		nvmeslot_23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x7>;
-		};
-	};
-};
-
-&i2c6 {
-	status = "okay";
-	psu@58 {
-		compatible = "pmbus";
-		reg = <0x58>;
-	};
-
-	psu@59 {
-		compatible = "pmbus";
-		reg = <0x59>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-	adm1278@10 {
-		compatible = "adi,adm1278";
-		reg = <0x10>;
-	};
-
-	adm1278@11 {
-		compatible = "adi,adm1278";
-		reg = <0x11>;
-	};
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default
-			&pinctrl_pwm4_default &pinctrl_pwm5_default
-			&pinctrl_pwm6_default &pinctrl_pwm7_default>;
-
-	fan@0 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@1 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@2 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@5 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-
-	fan@6 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
-	};
-
-	fan@7 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
-	};
-
-	fan@8 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
-	};
-
-	fan@9 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
-	};
-
-	fan@10 {
-		reg = <0x07>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
-	};
-
-	fan@11 {
-		reg = <0x07>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
-	};
-
-};
-
-&vhub {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&gpio {
-	gpio-line-names =
-	/*A0-A7*/	"","","","S0_BMC_SPECIAL_BOOT","","","","",
-	/*B0-B7*/	"BMC_SELECT_EEPROM","","","",
-			"POWER_BUTTON","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
-			"S1_DDR_SAVE","","",
-	/*G0-G7*/	"host0-ready","SHD_REQ_L","","S0_OVERTEMP_L","","",
-			"","",
-	/*H0-H7*/	"","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","",
-	/*I0-I7*/	"PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT",
-			"","","","","",
-	/*J0-J7*/	"S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","",
-			"","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/       "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","UID_BUTTON","","",
-	/*R0-R7*/	"","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
-			"OCP_MAIN_PWREN","RESET_BUTTON","","",
-	/*S0-S7*/	"","","","","rtc-battery-voltage-read-enable","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","",
-			"S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR",
-			"S1_BMC_DDR_ADR","","","","",
-	/*AC0-AC7*/	"SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
-			"BMC_OCP_PG";
-
-	i2c4-o-en-hog {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_I2C4_O_EN";
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
deleted file mode 100644
index 1e0e884652549..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
+++ /dev/null
@@ -1,585 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (c) 2022, Ampere Computing LLC
-
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Ampere Mt.Mitchell BMC";
-	compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
-
-	chosen {
-		stdout-path = &uart5;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: video {
-			size = <0x04000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		vga_memory: region@bf000000 {
-			no-map;
-			compatible = "shared-dma-pool";
-			reg = <0xbf000000 0x01000000>;  /* 16M */
-		};
-	};
-
-	voltage_mon_reg: voltage-mon-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "ltc2497_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	gpioI5mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-		mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>;
-	};
-
-	adc0mux: adc0mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc0 0>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc1mux: adc1mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc0 1>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc2mux: adc2mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc0 2>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc3mux: adc3mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc0 3>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc4mux: adc4mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc0 4>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc5mux: adc5mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc0 5>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc6mux: adc6mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc0 6>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc7mux: adc7mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc0 7>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc8mux: adc8mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc1 0>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc9mux: adc9mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc1 1>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc10mux: adc10mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc1 2>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc11mux: adc11mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc1 3>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc12mux: adc12mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc1 4>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc13mux: adc13mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc1 5>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc14mux: adc14mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc1 6>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	adc15mux: adc15mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc1 7>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioI5mux>;
-		channels = "s0", "s1";
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc0mux 0>, <&adc0mux 1>,
-			<&adc1mux 0>, <&adc1mux 1>,
-			<&adc2mux 0>, <&adc2mux 1>,
-			<&adc3mux 0>, <&adc3mux 1>,
-			<&adc4mux 0>, <&adc4mux 1>,
-			<&adc5mux 0>, <&adc5mux 1>,
-			<&adc6mux 0>, <&adc6mux 1>,
-			<&adc7mux 0>, <&adc7mux 1>,
-			<&adc8mux 0>, <&adc8mux 1>,
-			<&adc9mux 0>, <&adc9mux 1>,
-			<&adc10mux 0>, <&adc10mux 1>,
-			<&adc11mux 0>, <&adc11mux 1>,
-			<&adc12mux 0>, <&adc12mux 1>,
-			<&adc13mux 0>, <&adc13mux 1>,
-			<&adc14mux 0>, <&adc14mux 1>,
-			<&adc15mux 0>, <&adc15mux 1>,
-			<&adc_i2c 0>, <&adc_i2c 1>,
-			<&adc_i2c 2>, <&adc_i2c 3>,
-			<&adc_i2c 4>, <&adc_i2c 5>,
-			<&adc_i2c 6>, <&adc_i2c 7>,
-			<&adc_i2c 8>, <&adc_i2c 9>,
-			<&adc_i2c 10>, <&adc_i2c 11>,
-			<&adc_i2c 12>, <&adc_i2c 13>,
-			<&adc_i2c 14>, <&adc_i2c 15>;
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&mac0 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy0>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii1_default>;
-};
-
-&mac3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii4_default>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-64.dtsi"
-	};
-
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt-bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-64-alt.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		spi-max-frequency = <20000000>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	temperature-sensor@2e {
-		compatible = "adi,adt7490";
-		reg = <0x2e>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	psu@58 {
-		compatible = "pmbus";
-		reg = <0x58>;
-	};
-
-	psu@59 {
-		compatible = "pmbus";
-		reg = <0x59>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-
-	adc_i2c: adc@16 {
-		compatible = "lltc,ltc2497";
-		reg = <0x16>;
-		vref-supply = <&voltage_mon_reg>;
-		#io-channel-cells = <1>;
-	 };
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		i2c4_bus70_chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-
-			outlet_temp1: temperature-sensor@48 {
-				compatible = "ti,tmp75";
-				reg = <0x48>;
-			};
-			psu1_inlet_temp2: temperature-sensor@49 {
-				compatible = "ti,tmp75";
-				reg = <0x49>;
-			};
-		};
-
-		i2c4_bus70_chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1>;
-
-			pcie_zone_temp1: temperature-sensor@48 {
-				compatible = "ti,tmp75";
-				reg = <0x48>;
-			};
-			psu0_inlet_temp2: temperature-sensor@49 {
-				compatible = "ti,tmp75";
-				reg = <0x49>;
-			};
-		};
-
-		i2c4_bus70_chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-
-			pcie_zone_temp2: temperature-sensor@48 {
-				compatible = "ti,tmp75";
-				reg = <0x48>;
-			};
-			outlet_temp2: temperature-sensor@49 {
-				compatible = "ti,tmp75";
-				reg = <0x49>;
-			};
-		};
-
-		i2c4_bus70_chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3>;
-
-			mb_inlet_temp1: temperature-sensor@7c {
-				compatible = "microchip,emc1413";
-				reg = <0x7c>;
-			};
-			mb_inlet_temp2: temperature-sensor@4c {
-				compatible = "microchip,emc1413";
-				reg = <0x4c>;
-			};
-		};
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-	};
-};
-
-&i2c6 {
-	status = "okay";
-	rtc@51 {
-		compatible = "nxp,pcf85063a";
-		reg = <0x51>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-
-	gpio@77 {
-		compatible = "nxp,pca9539";
-		reg = <0x77>;
-		gpio-controller;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#gpio-cells = <2>;
-
-		bmc-ocp0-en-hog {
-			gpio-hog;
-			gpios = <7 GPIO_ACTIVE_LOW>;
-			output-high;
-			line-name = "bmc-ocp0-en-n";
-		};
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-	ssif-bmc@10 {
-		compatible = "ssif-bmc";
-		reg = <0x10>;
-	};
-};
-
-&i2c14 {
-	status = "okay";
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	bmc_ast2600_cpu: temperature-sensor@35 {
-		compatible = "ti,tmp175";
-		reg = <0x35>;
-	};
-};
-
-&adc0 {
-	ref_voltage = <2500>;
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
-		&pinctrl_adc2_default &pinctrl_adc3_default
-		&pinctrl_adc4_default &pinctrl_adc5_default
-		&pinctrl_adc6_default &pinctrl_adc7_default>;
-};
-
-&adc1 {
-	ref_voltage = <2500>;
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
-		&pinctrl_adc10_default &pinctrl_adc11_default
-		&pinctrl_adc12_default &pinctrl_adc13_default
-		&pinctrl_adc14_default &pinctrl_adc15_default>;
-};
-
-&vhub {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&gpio0 {
-	gpio-line-names =
-	/*A0-A7*/	"","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n",
-	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","","",
-	/*C0-C7*/	"s0-vrd-fault-n","s1-vrd-fault-n","","",
-			"irq-n","","vrd-sel","spd-sel",
-	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
-			"","bmc-ncsi-txen","","",
-	/*E0-E7*/	"","","clk50m-bmc-ncsi","","","","","",
-	/*F0-F7*/	"s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control",
-			"cpu-bios-recover","s0-heartbeat","hs-csout-prochot",
-			"s0-vr-hot-n","s1-vr-hot-n",
-	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","","","",
-	/*H0-H7*/	"","","wd-disable-n","power-chassis-good","","","","",
-	/*I0-I7*/	"","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","s0-ddr-save","soc-spi-nor-access","presence-cpu0",
-			"s0-rtc-lock","","","",
-	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
-			"jtag-dbgr-prsnt-n","s1-heartbeat","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","",
-			"led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","","","","","","",
-	/*S0-S7*/	"","","identify-button","led-identify",
-			"s1-ddr-save","spi-nor-access","sys-pgood","presence-cpu1",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
-			"host0-reboot-ack-n","host0-ready","host0-shd-req-n",
-			"host0-shd-ack-n","s0-overtemp-n",
-	/*W0-W7*/	"","ocp-main-pwren","ocp-pgood","",
-			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
-	/*X0-X7*/	"i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
-			"s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
-			"s1-overtemp-n","s1-spi-auth-fail-n",
-	/*Y0-Y7*/	"","","","","","","","host0-special-boot",
-	/*Z0-Z7*/	"reset-button","ps0-pgood","ps1-pgood","","","","","";
-
-	ocp-aux-pwren-hog {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "ocp-aux-pwren";
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-	/*18A0-18A7*/	"","","","","","","","",
-	/*18B0-18B7*/	"","","","","","","s0-soc-pgood","",
-	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
-			"uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1",
-	/*18D0-18D7*/	"","","","","","","","",
-	/*18E0-18E3*/	"","","","";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
deleted file mode 100644
index 7c6af7f226e75..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
+++ /dev/null
@@ -1,220 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "HXT StarDragon 4800 REP2 AST2520";
-	compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-						<&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 7>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		system_fault1 {
-			label = "System_fault1";
-			gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
-		};
-
-		system_fault2 {
-			label = "System_fault2";
-			gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-	flash@0 {
-		status = "okay";
-	};
-};
-
-&spi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2ck_default
-			&pinctrl_spi2miso_default
-			&pinctrl_spi2mosi_default
-			&pinctrl_spi2cs0_default>;
-};
-
-&uart3 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
-	current-speed = <115200>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
-};
-
-&mac1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii2_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
-		 <&syscon ASPEED_CLK_MAC2RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	tmp421@1e {
-		compatible = "ti,tmp421";
-		reg = <0x1e>;
-	};
-	tmp421@2a {
-		compatible = "ti,tmp421";
-		reg = <0x2a>;
-	};
-	tmp421@1c {
-		compatible = "ti,tmp421";
-		reg = <0x1c>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-
-	tmp421@1f {
-		compatible = "ti,tmp421";
-		reg = <0x1f>;
-	};
-	nvt210@4c {
-		compatible = "nvt210";
-		reg = <0x4c>;
-	};
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <128>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-
-	pca9641@70 {
-		compatible = "nxp,pca9641";
-		reg = <0x70>;
-		i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			eeprom@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-			};
-			dps650ab@58 {
-				compatible = "dps650ab";
-				reg = <0x58>;
-			};
-		};
-	};
-
-	dps650ab@58 {
-		compatible = "delta,dps650ab";
-		reg = <0x58>;
-	};
-
-	dps650ab@59 {
-		compatible = "delta,dps650ab";
-		reg = <0x59>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&gpio {
-	pin_gpio_c7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "BIOS_SPI_MUX_S";
-	};
-	pin_gpio_d1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PHY2_RESET_N";
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
deleted file mode 100644
index c4b2efbfdf56d..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
+++ /dev/null
@@ -1,208 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/{
-	model = "ASRock E3C246D4I BMC";
-	compatible = "asrock,e3c246d4i-bmc", "aspeed,ast2500";
-
-	aliases {
-		serial4 = &uart5;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			/* BMC_HB_LED_N */
-			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		system-fault {
-			/* SYSTEM_FAULT_LED_N */
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
-			panic-indicator;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		uid-button {
-			label = "uid-button";
-			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 1)>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
-			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
-			<&adc 10>, <&adc 11>, <&adc 12>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>; /* 50 MHz */
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-	aspeed,lpc-io-reg = <0x2f8>;
-	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
-};
-
-&i2c1 {
-	status = "okay";
-
-	/* thermal sensor, one diode run to a disconnected header */
-	w83773g@4c {
-		compatible = "nuvoton,w83773g";
-		reg = <0x4c>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-
-	/* FRU EEPROM */
-	eeprom@57 {
-		compatible = "st,24c128", "atmel,24c128";
-		reg = <0x57>;
-		pagesize = <16>;
-	};
-};
-
-&video {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-};
-
-&lpc_snoop {
-	status = "okay";
-	snoop-ports = <0x80>;
-};
-
-&gpio {
-	status = "okay";
-	gpio-line-names =
-		/*  A */ "BMC_MAC1_INTB", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
-			"", "", "", "",
-		/*  B */ "", "", "", "", "", "IRQ_BMC_PCH_SMI_LPC_N", "", "",
-		/*  C */ "", "", "", "", "", "", "", "",
-		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
-			"", "", "", "",
-		/*  E */ "", "", "", "", "", "", "", "",
-		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
-			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
-		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
-			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "SML0ALERT",
-		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "SKL_CNL_R", "D4_DIMM_EVENT_3V_N",
-			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
-		/*  I */ "", "", "", "", "", "", "", "",
-		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "",
-			"", "", "", "",
-		/*  K */ "", "", "", "", "", "", "", "",
-		/*  L */ "BMC_CTS1", "BMC_DCD1", "BMC_DSR1", "BMC_RI1",
-			"BMC_DTR1", "BMC_RTS1", "BMC_TXD1", "BMC_RXD1",
-		/*  M */ "BMC_LAN0_DIS_N", "BMC_LAN1_DIS_N", "", "",
-			"", "", "", "",
-		/*  N */ "", "", "", "", "", "", "", "",
-		/*  O */ "", "", "", "", "", "", "", "",
-		/*  P */ "", "", "", "", "", "", "", "",
-		/*  Q */ "", "", "", "",
-			"BMC_SBM_PRESENT_1_N", "BMC_SBM_PRESENT_2_N",
-			"BMC_SBM_PRESENT_3_N", "BMC_PCIE_WAKE_N",
-		/*  R */ "", "", "", "", "", "", "", "",
-		/*  S */ "PCHHOT_BMC_N", "", "RSMRST",
-			"", "", "", "", "",
-		/*  T */ "", "", "", "", "", "", "", "",
-		/*  U */ "", "", "", "", "", "", "", "",
-		/*  V */ "", "", "", "", "", "", "", "",
-		/*  W */ "PS_PWROK", /* dummy always-high signal */
-			"", "", "", "", "", "", "",
-		/*  X */ "", "", "", "", "", "", "", "",
-		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
-		/*  Z */ "CPU_CATERR_BMC_PCH_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
-			"", "", "", "",
-		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
-			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
-		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY",
-			"", "", "", "",
-		/* AC */ "LAD0", "LAD1", "LAD2", "LAD3",
-			"CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
-
-	/* Assert BMC_READY so BIOS doesn't sit around waiting for it */
-	bmc-ready {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
-		output-high;
-	};
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-			&pinctrl_adc1_default
-			&pinctrl_adc2_default
-			&pinctrl_adc3_default
-			&pinctrl_adc4_default
-			&pinctrl_adc5_default
-			&pinctrl_adc6_default
-			&pinctrl_adc7_default
-			&pinctrl_adc8_default
-			&pinctrl_adc9_default
-			&pinctrl_adc10_default
-			&pinctrl_adc11_default
-			&pinctrl_adc12_default>;
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-};
-
-&peci0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
deleted file mode 100644
index 4554abf0c7cdf..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/{
-	model = "ASRock ROMED8HM3 BMC v1.00";
-	compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500";
-
-	aliases {
-		serial4 = &uart5;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		system-fault {
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
-			panic-indicator;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
-			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
-			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>; /* 50 MHz */
-#include "openbmc-flash-layout-64.dtsi"
-	};
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-	aspeed,lpc-io-reg = <0x2f8>;
-	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	/* inlet temp sensor */
-	w83773g@4c {
-		compatible = "nuvoton,w83773g";
-		reg = <0x4c>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* IPB temp sensor */
-	w83773g@4c {
-		compatible = "nuvoton,w83773g";
-		reg = <0x4c>;
-	};
-
-	/* IPB PMIC */
-	lm25066@40 {
-		compatible = "lm25066";
-		reg = <0x40>;
-		shunt-resistor-micro-ohms = <1000>;
-	};
-
-	/* 12VSB PMIC */
-	lm25066@41 {
-		compatible = "lm25066";
-		reg = <0x41>;
-		shunt-resistor-micro-ohms = <10000>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-
-	/* Baseboard FRU eeprom */
-	eeprom@50 {
-		compatible = "st,24c128", "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-};
-
-&lpc_snoop {
-	status = "okay";
-	snoop-ports = <0x80>;
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3_default
-		&pinctrl_pwm4_default
-		&pinctrl_pwm5_default
-		&pinctrl_pwm6_default>;
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>;
-	};
-
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>;
-	};
-
-	fan@6 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>;
-	};
-};
-
-&gpio {
-	status = "okay";
-	gpio-line-names =
-		/*  A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
-			"", "", "", "",
-		/*  B */ "POST_COMPLETE_N", "", "", "", "", "", "", "",
-		/*  C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "",
-		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
-			"", "", "", "PSU_FAN_FAIL_N",
-		/*  E */ "", "", "", "", "", "", "", "",
-		/*  F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2",
-			"PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG",
-		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
-			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N",
-		/*  H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N",
-			"FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
-		/*  I */ "", "", "", "", "", "", "", "",
-		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N",
-			"", "", "", "",
-		/*  K */ "", "", "", "", "", "", "", "",
-		/*  L */ "", "", "", "", "", "", "", "",
-		/*  M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN",
-			"MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN",
-		/*  N */ "", "", "", "", "", "", "", "",
-		/*  O */ "", "", "", "", "", "", "", "",
-		/*  P */ "", "", "", "", "", "", "", "",
-		/*  Q */ "", "", "", "",
-			"BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N",
-			"BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N",
-		/*  R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "",
-		/*  S */ "", "", "", "", "", "", "", "",
-		/*  T */ "", "", "", "", "", "", "", "",
-		/*  U */ "", "", "", "", "", "", "", "",
-		/*  V */ "", "", "", "", "", "", "", "",
-		/*  W */ "", "", "", "", "", "", "", "",
-		/*  X */ "", "", "", "", "", "", "", "",
-		/*  Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "",
-		/*  Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N",
-			"", "", "", "",
-		/* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "",
-			"", "", "", "",
-		/* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N",
-			"", "", "", "",
-		/* AC */ "", "", "", "", "", "", "", "";
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-		&pinctrl_adc1_default
-		&pinctrl_adc2_default
-		&pinctrl_adc3_default
-		&pinctrl_adc4_default
-		&pinctrl_adc5_default
-		&pinctrl_adc6_default
-		&pinctrl_adc7_default
-		&pinctrl_adc8_default
-		&pinctrl_adc9_default
-		&pinctrl_adc10_default
-		&pinctrl_adc11_default
-		&pinctrl_adc12_default
-		&pinctrl_adc13_default
-		&pinctrl_adc14_default
-		&pinctrl_adc15_default>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
deleted file mode 100644
index f75cad41ae6f6..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
+++ /dev/null
@@ -1,940 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (C) 2020 Bytedance.
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Bytedance G220A BMC";
-	compatible = "bytedance,g220a-bmc", "aspeed,ast2500";
-
-	aliases {
-		serial4 = &uart5;
-		i2c14 = &channel_3_0;
-		i2c15 = &channel_3_1;
-		i2c16 = &channel_3_2;
-		i2c17 = &channel_3_3;
-		i2c18 = &channel_6_0;
-		i2c19 = &channel_6_1;
-		i2c20 = &channel_6_2;
-		i2c21 = &channel_6_3;
-		i2c22 = &channel_6_4;
-		i2c23 = &channel_6_5;
-		i2c24 = &channel_6_6;
-		i2c25 = &channel_6_7;
-		i2c26 = &channel_6_8;
-		i2c27 = &channel_6_9;
-		i2c28 = &channel_6_10;
-		i2c29 = &channel_6_11;
-		i2c30 = &channel_6_12;
-		i2c31 = &channel_6_13;
-		i2c32 = &channel_6_14;
-		i2c33 = &channel_6_15;
-		i2c34 = &channel_6_16;
-		i2c35 = &channel_6_17;
-		i2c36 = &channel_6_18;
-		i2c37 = &channel_6_19;
-		i2c38 = &channel_6_20;
-		i2c39 = &channel_6_21;
-		i2c40 = &channel_6_22;
-		i2c41 = &channel_6_23;
-		i2c42 = &channel_6_24;
-		i2c43 = &channel_6_25;
-		i2c44 = &channel_10_0;
-		i2c45 = &channel_10_1;
-		i2c46 = &channel_10_2;
-		i2c47 = &channel_10_3;
-		i2c48 = &channel_10_4;
-		i2c49 = &channel_10_5;
-		i2c50 = &channel_10_6;
-		i2c51 = &channel_10_7;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@bc000000 {
-			no-map;
-			reg = <0xbc000000 0x04000000>; /* 64M */
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;	/* 32M */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
-			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
-			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		bmc_alive {
-			label = "bmc_alive";
-			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-			led-pattern = <1000 1000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		event-burn-in-signal {
-			label = "burn-in";
-			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(R, 5)>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-rear-riser1-presence {
-			label = "rear-riser1-presence";
-			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <1>;
-		};
-
-		event-alrt-pvddq-cpu0 {
-			label = "alrt-pvddq-cpu0";
-			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
-			linux,code = <2>;
-		};
-
-		event-rear-riser0-presence {
-			label = "rear-riser0-presence";
-			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
-			linux,code = <3>;
-		};
-
-		event-fault-pvddq-cpu0 {
-			label = "fault-pvddq-cpu0";
-			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
-			linux,code = <4>;
-		};
-
-		event-alrt-pvddq-cpu1 {
-			label = "alrt-pvddq-cpu1";
-			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
-			linux,code = <5>;
-		};
-
-		event-fault-pvddq-cpu1 {
-			label = "alrt-pvddq-cpu1";
-			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		event-fault-pvccin-cpu1 {
-			label = "fault-pvccin-cpuq";
-			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		event-bmc-rom0-wp {
-			label = "bmc-rom0-wp";
-			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
-			linux,code = <8>;
-		};
-
-		event-bmc-rom1-wp {
-			label = "bmc-rom1-wp";
-			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
-			linux,code = <10>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
-			linux,code = <11>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		event-fan4-presence {
-			label = "fan4-presence";
-			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
-			linux,code = <14>;
-		};
-
-		event-fan5-presence {
-			label = "fan5-presence";
-			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
-			linux,code = <15>;
-		};
-
-		event-front-bp1-presence {
-			label = "front-bp1-presence";
-			gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
-			linux,code = <16>;
-		};
-
-		event-rear-bp-presence {
-			label = "rear-bp-presence";
-			gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
-			linux,code = <17>;
-		};
-
-		event-fault-pvccin-cpu0 {
-			label = "fault-pvccin-cpu0";
-			gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
-			linux,code = <18>;
-		};
-
-		event-alrt-p1v05-pvcc {
-			label = "alrt-p1v05-pvcc1";
-			gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
-			linux,code = <19>;
-		};
-
-		event-fault-p1v05-pvccio {
-			label = "alrt-p1v05-pvcc1";
-			gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
-			linux,code = <20>;
-		};
-
-		event-alrt-p1v8-pvccio {
-			label = "alrt-p1v8-pvccio";
-			gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
-			linux,code = <21>;
-		};
-
-		event-fault-p1v8-pvccio {
-			label = "fault-p1v8-pvccio";
-			gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
-			linux,code = <22>;
-		};
-
-		event-front-bp0-presence {
-			label = "front-bp0-presence";
-			gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
-			linux,code = <23>;
-		};
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-64.dtsi"
-	};
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-64-alt.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bios";
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&adc {
-	status = "okay";
-};
-
-&wdt2 {
-	status = "okay";
-	aspeed,alt-boot;
-};
-
-&gpio {
-	status = "okay";
-	gpio-line-names =
-	/*A0-A7*/	"SMRST_OCP_N","MAC2_LINK","BMC_CPLD_SMB_RST_R_N","BMC_CPLD_GPIO0",
-			"","","","",
-	/*B0-B7*/	"BMC_INIT_R_OK","FM_BOARD_REV_ID2","FM_PROJECT_ID7","FAULT_P12V_STBY_N",
-			"","CPU0_PROCHOT_LVT3_N","","BIOS_LOAD_DEFAULT_R_N",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"FM_PROJECT_ID0","FM_PROJECT_ID1","FM_PROJECT_ID2","FM_PROJECT_ID3",
-			"FM_PROJECT_ID4","FM_PROJECT_ID5","","",
-	/*F0-F7*/	"PSU0_PRSNT_N","PSU1_PRSNT_N","","FAULT_P12V_NVME_N",
-			"BIOS_DEBUG_MODE_R_N","DISABLE_CPU_DDR_R_SPD","COOLING_STRATEGY",
-			"PCH_GLB_RST_N",
-	/*G0-G7*/	"P12V_PMBUS_ALERT_N","CPLD_ALERT_N","BMC_RELOAD_N",
-			"P12V_PVDDQ_PMBUS_ALERT_N","BMC_JTAG_TCK_MUX_R_SEL","","NMI_OUT",
-			"NMI_BUTTON",
-	/*H0-H7*/	"BMC_CPLD_JTAG_TDI","BMC_CPLD_JTAG_TDO","BMC_CPLD_JTAG_TCK",
-			"BMC_CPLD_JTAG_TMS","FM_PROJECT_ID6","FM_BOARD_REV_ID0",
-			"PCA9546_U70_RST_N","IRQ_SML0_ALERT_N",
-	/*I0-I7*/	"FAULT_FRONT_RISER_P12V_N","FAULT_OCP_P12V_N","FM_BMC_PCH_SCI_R_N",
-			"","","","","",
-	/*J0-J7*/	"FM_CPU0_SKTOCC_N","FM_CPU1_SKTOCC_N","FM_CPU1_DISABLE_COD_N",
-			"","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"P12V_FAULT_N","PWRGD_P12V_PCIE_RISER","","LEAKAGE_DETECT_INPUT_N",
-			"","IRQ_SML1_PMBUS_ALERT_N","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","","FM_PCH_THERMTRIP_N","CHASSIS_INTRUSION",
-	/*R0-R7*/	"","PVCCIN_CPU1_SMBALERT_N","BMC_PREQ_R_N","FAULT_P12V_PCIE_RISER_N",
-			"ALT_P12V_PCIE_RISER_N","BURN_BOARD_N","PVCCIN_CPU0_SMBALERT_N","",
-	/*S0-S7*/	"BMC_PRDY_N","SIO_POWER_GOOD","FM_BMC_PWR_DEBUG_R_N",
-			"FM_BMC_XDP_DEBUG_EN","","STRAP_BMC_BATTERY_GPIOS5","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","PWRGD_PSU0_PWROK","CPU1_PROCHOT_LVT3_N","IRQ_BMC_PCH_SMI_LPC_N",
-			"","","","",
-	/*Z0-Z7*/	"XDP_PRSNT_N","BMC_XDP_SYS_PWROK","BMC_XDP_JTAG_SEL",
-			"PCH_BMC_SMI_ACTIVE_R_N","","","","",
-	/*AA0-AA7*/	"PWRGD_P12V_STBY_OCP","PS_PWROK","RST_PLTRST_BMC_R_N","HDA_SDO_R",
-			"FM_SLPS4_R_N","PWRGD_PSU1_PWROK","POWER_BUTTON","POWER_OUT",
-	/*AB0-AB7*/	"","RESET_OUT","SPI_BIOS_MODE_SELECT","POST_COMPLETE","","","","",
-	/*AC0-AC7*/	"","","","","","","","CPLD_PLTRST_B_N";
-};
-
-&kcs3 {
-	aspeed,lpc-io-reg = <0xCA2>;
-	status = "okay";
-};
-
-&kcs4 {
-	aspeed,lpc-io-reg = <0xCA4>;
-	status = "okay";
-};
-
-&lpc_snoop {
-	snoop-ports = <0x80>;
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-			&pinctrl_rxd2_default
-			&pinctrl_nrts2_default
-			&pinctrl_ndtr2_default
-			&pinctrl_ndsr2_default
-			&pinctrl_ncts2_default
-			&pinctrl_ndcd2_default
-			&pinctrl_nri2_default>;
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel_3_0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		channel_3_1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		channel_3_2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		channel_3_3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c4 {
-	status = "okay";
-	ipmb0@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-	i2c-switch@72 {
-		compatible = "nxp,pca9548";
-		reg = <0x72>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		channel_6_0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		channel_6_1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		channel_6_2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		channel_6_3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-		channel_6_4: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		channel_6_5: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		channel_6_6: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		channel_6_7: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		channel_6_8: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			i2c-switch@71 {
-				compatible = "nxp,pca9546";
-				reg = <0x71>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				channel_6_12: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-				};
-
-				channel_6_13: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				channel_6_14: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				channel_6_15: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-			};
-		 };
-
-		channel_6_9: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			i2c-switch@71 {
-				compatible = "nxp,pca9546";
-				reg = <0x71>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				channel_6_16: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-				};
-
-				channel_6_17: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				channel_6_18: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				channel_6_19: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-			};
-		 };
-
-		channel_6_10: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			i2c-switch@71 {
-				compatible = "nxp,pca9546";
-				reg = <0x71>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				channel_6_20: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				channel_6_21: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				channel_6_22: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				channel_6_23: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-			};
-		 };
-
-		channel_6_11: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			i2c-switch@71 {
-				compatible = "nxp,pca9546";
-				reg = <0x71>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				channel_6_24: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				channel_6_25: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-			 };
-		};
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-	pca0:pca9555@24 {
-		compatible = "nxp,pca9555";
-		reg = <0x24>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	pca1:pca9555@25 {
-		compatible = "nxp,pca9555";
-		reg = <0x25>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		channel_10_0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		channel_10_1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		channel_10_2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		channel_10_3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9546";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		channel_10_4: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		channel_10_5: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		channel_10_6: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		channel_10_7: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-			 &pinctrl_pwm2_default &pinctrl_pwm3_default
-			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
-	};
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
-	};
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
-	};
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
-	};
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
-	};
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
-	};
-};
-
-&gpio {
-	pin_gpio_i3 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "NCSI_BMC_R_SEL";
-	};
-
-	pin_gpio_b6 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "EN_NCSI_SWITCH_N";
-	};
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&vhub {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts
deleted file mode 100644
index 6600f7e9bf5ed..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts
+++ /dev/null
@@ -1,418 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-
-#include "aspeed-g4.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-#define EFUSE_OUTPUT(n)					\
-	efuse##n {					\
-		compatible = "regulator-output";	\
-		vout-supply = <&efuse##n>;		\
-	}
-
-#define __stringify(x) #x
-
-#define EFUSE(hexaddr, num)							\
-	efuse@##hexaddr {							\
-		compatible = "lm25066";						\
-		reg = <0x##hexaddr>;						\
-		shunt-resistor-micro-ohms = <675>;				\
-		regulators {							\
-			efuse##num: vout0 {					\
-				regulator-name = __stringify(efuse##num##-reg);	\
-			};							\
-		};								\
-	}
-
-/{
-	model = "Delta Power AHE-50DC";
-	compatible = "delta,ahe50dc-bmc", "aspeed,ast2400";
-
-	aliases {
-		serial4 = &uart5;
-
-		/*
-		 * pca9541-arbitrated logical i2c buses are numbered as the
-		 * corresponding physical bus plus 20
-		 */
-		i2c20 = &i2carb0;
-		i2c21 = &i2carb1;
-		i2c22 = &i2carb2;
-		i2c23 = &i2carb3;
-		i2c24 = &i2carb4;
-		i2c26 = &i2carb6;
-		i2c27 = &i2carb7;
-		i2c28 = &i2carb8;
-		i2c32 = &i2carb12;
-	};
-
-	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS2,115200n8 earlycon";
-	};
-
-	memory@40000000 {
-		reg = <0x40000000 0x10000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		panic {
-			gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic";
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
-			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
-	};
-
-	EFUSE_OUTPUT(01);
-	EFUSE_OUTPUT(02);
-	EFUSE_OUTPUT(03);
-	EFUSE_OUTPUT(04);
-	EFUSE_OUTPUT(05);
-	EFUSE_OUTPUT(06);
-	EFUSE_OUTPUT(07);
-	EFUSE_OUTPUT(08);
-	EFUSE_OUTPUT(09);
-	EFUSE_OUTPUT(10);
-	EFUSE_OUTPUT(11);
-	EFUSE_OUTPUT(12);
-	EFUSE_OUTPUT(13);
-	EFUSE_OUTPUT(14);
-	EFUSE_OUTPUT(15);
-	EFUSE_OUTPUT(16);
-	EFUSE_OUTPUT(17);
-	EFUSE_OUTPUT(18);
-	EFUSE_OUTPUT(19);
-	EFUSE_OUTPUT(20);
-	EFUSE_OUTPUT(21);
-	EFUSE_OUTPUT(22);
-	EFUSE_OUTPUT(23);
-	EFUSE_OUTPUT(24);
-	EFUSE_OUTPUT(25);
-	EFUSE_OUTPUT(26);
-	EFUSE_OUTPUT(27);
-	EFUSE_OUTPUT(28);
-	EFUSE_OUTPUT(29);
-	EFUSE_OUTPUT(30);
-	EFUSE_OUTPUT(31);
-	EFUSE_OUTPUT(32);
-	EFUSE_OUTPUT(33);
-	EFUSE_OUTPUT(34);
-	EFUSE_OUTPUT(35);
-	EFUSE_OUTPUT(36);
-	EFUSE_OUTPUT(37);
-	EFUSE_OUTPUT(38);
-	EFUSE_OUTPUT(39);
-	EFUSE_OUTPUT(40);
-	EFUSE_OUTPUT(41);
-	EFUSE_OUTPUT(42);
-	EFUSE_OUTPUT(43);
-	EFUSE_OUTPUT(44);
-	EFUSE_OUTPUT(45);
-	EFUSE_OUTPUT(46);
-	EFUSE_OUTPUT(47);
-	EFUSE_OUTPUT(48);
-	EFUSE_OUTPUT(49);
-	EFUSE_OUTPUT(50);
-
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "flash0";
-		spi-max-frequency = <50000000>; // 50 MHz
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&mac1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "okay";
-	bus-frequency = <200000>;
-
-	pca9541@79 {
-		compatible = "nxp,pca9541";
-		reg = <0x79>;
-
-		i2carb0: i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* lm25066 efuses @ 10-17, 40-47, 50-57 */
-			EFUSE(10, 03);
-			EFUSE(11, 04);
-			EFUSE(12, 01);
-			EFUSE(13, 02);
-			EFUSE(14, 13);
-			EFUSE(15, 14);
-			EFUSE(16, 15);
-			EFUSE(17, 16);
-			EFUSE(40, 12);
-			EFUSE(41, 11);
-			EFUSE(42, 10);
-			EFUSE(43, 09);
-			EFUSE(44, 08);
-			EFUSE(45, 07);
-			EFUSE(46, 05);
-			EFUSE(47, 06);
-			EFUSE(50, 17);
-			EFUSE(51, 18);
-			EFUSE(52, 20);
-			EFUSE(53, 19);
-			EFUSE(54, 22);
-			EFUSE(55, 21);
-			EFUSE(56, 24);
-			EFUSE(57, 23);
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	bus-frequency = <200000>;
-
-	pca9541@72 {
-		compatible = "nxp,pca9541";
-		reg = <0x72>;
-
-		i2carb1: i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	bus-frequency = <200000>;
-
-	pca9541@73 {
-		compatible = "nxp,pca9541";
-		reg = <0x73>;
-
-		i2carb2: i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&i2c3 {
-	status = "okay";
-	bus-frequency = <200000>;
-
-	pca9541@74 {
-		compatible = "nxp,pca9541";
-		reg = <0x74>;
-
-		i2carb3: i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&i2c4 {
-	status = "okay";
-	bus-frequency = <200000>;
-
-	pca9541@7a {
-		compatible = "nxp,pca9541";
-		reg = <0x7a>;
-
-		i2carb4: i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio@20 {
-				compatible = "nxp,pca9534";
-				reg = <0x20>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			/* lm25066 efuses @ 10-17, 40-47, 50-57, 59, 5a */
-			EFUSE(10, 27);
-			EFUSE(11, 28);
-			EFUSE(12, 25);
-			EFUSE(13, 26);
-			EFUSE(14, 37);
-			EFUSE(15, 38);
-			EFUSE(16, 39);
-			EFUSE(17, 40);
-			EFUSE(40, 36);
-			EFUSE(41, 35);
-			EFUSE(42, 34);
-			EFUSE(43, 33);
-			EFUSE(44, 32);
-			EFUSE(45, 31);
-			EFUSE(46, 29);
-			EFUSE(47, 30);
-			EFUSE(50, 41);
-			EFUSE(51, 42);
-			EFUSE(52, 44);
-			EFUSE(53, 43);
-			EFUSE(54, 46);
-			EFUSE(55, 45);
-			EFUSE(56, 48);
-			EFUSE(57, 47);
-			EFUSE(59, 49);
-			EFUSE(5a, 50);
-		};
-	};
-};
-
-&i2c6 {
-	status = "okay";
-	bus-frequency = <200000>;
-
-	pca9541@75 {
-		compatible = "nxp,pca9541";
-		reg = <0x75>;
-
-		i2carb6: i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&i2c7 {
-	status = "okay";
-	bus-frequency = <200000>;
-
-	pca9541@76 {
-		compatible = "nxp,pca9541";
-		reg = <0x76>;
-
-		i2carb7: i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&i2c8 {
-	status = "okay";
-	bus-frequency = <200000>;
-
-	pca9541@7c {
-		compatible = "nxp,pca9541";
-		reg = <0x7c>;
-
-		i2carb8: i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fancontrol@30 {
-				compatible = "delta,ahe50dc-fan";
-				reg = <0x30>;
-			};
-
-			/* Baseboard FRU eeprom */
-			eeprom@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-			};
-		};
-	};
-};
-
-&i2c12 {
-	status = "okay";
-	bus-frequency = <200000>;
-
-	pca9541@71 {
-		compatible = "nxp,pca9541";
-		reg = <0x71>;
-
-		i2carb12: i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&gpio {
-	status = "okay";
-	gpio-line-names =
-		/*  A */ "", "", "", "", "", "", "", "",
-		/*  B */ "", "", "", "", "", "", "", "",
-		/*  C */ "RESET_PEER_N", "HEARTBEAT_OUT", "", "", "", "", "", "",
-		/*  D */ "", "", "", "", "", "", "", "",
-		/*  E */ "DOOM_N", "", "", "", "", "LED_PWR_BLUE", "", "",
-		/*  F */ "", "", "", "", "", "", "", "",
-		/*  G */ "", "", "", "", "", "", "", "",
-		/*  H */ "", "", "", "", "", "", "", "",
-		/*  I */ "", "", "", "", "", "", "", "",
-		/*  J */ "", "", "BMC_ID", "", "", "", "", "",
-		/*  K */ "", "", "", "", "", "", "", "",
-		/*  L */ "", "", "", "", "", "", "", "",
-		/*  M */ "", "", "", "", "", "", "", "",
-		/*  N */ "", "", "", "", "", "", "", "",
-		/*  O */ "", "", "", "", "", "", "", "",
-		/*  P */ "LED_GREEN", "", "LED_RED", "", "", "", "", "",
-		/*  Q */ "", "", "", "", "", "", "", "",
-		/*  R */ "", "", "", "", "", "", "", "",
-		/*  S */ "", "", "", "", "", "", "", "",
-		/*  T */ "", "", "", "", "", "", "", "",
-		/*  U */ "", "", "", "", "", "", "", "",
-		/*  V */ "", "", "", "", "", "", "", "",
-		/*  W */ "", "", "", "", "", "", "", "",
-		/*  X */ "", "", "", "", "", "", "", "",
-		/*  Y */ "HEARTBEAT_IN", "BOARDREV0", "BOARDREV1", "",
-		/*  Z */ "", "", "", "", "", "", "", "",
-		/* AA */ "", "", "", "", "", "", "", "",
-		/* AB */ "", "", "", "";
-
-	/*
-	 * I don't rightly know what this GPIO really *is*, but setting it to
-	 * zero causes the fans to run at full speed, after which setting it
-	 * back to one causes a power output glitch, so install a hog to keep
-	 * it at one as a failsafe to ensure nothing accidentally touches it.
-	 */
-	doom-guardrail {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
-		output-low;
-	};
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-		&pinctrl_adc1_default
-		&pinctrl_adc2_default
-		&pinctrl_adc3_default
-		&pinctrl_adc4_default
-		&pinctrl_adc5_default
-		&pinctrl_adc6_default
-		&pinctrl_adc7_default
-		&pinctrl_adc8_default
-		&pinctrl_adc9_default>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
deleted file mode 100644
index e899de681f475..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
+++ /dev/null
@@ -1,1077 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2021 Facebook Inc.
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/usb/pd.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/i2c/i2c.h>
-
-/ {
-	model = "Facebook Bletchley BMC";
-	compatible = "facebook,bletchley-bmc", "aspeed,ast2600";
-
-	aliases {
-		serial4 = &uart5;
-	};
-
-	chosen {
-		bootargs = "console=ttyS4,57600n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
-			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
-			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
-			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
-	};
-
-	spi1_gpio: spi1-gpio {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
-
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
-			spi-max-frequency = <33000000>;
-			reg = <0>;
-		};
-	};
-
-	switchphy: ethernet-phy@0 {
-		// Fixed link
-	};
-
-	front_gpio_leds {
-		compatible = "gpio-leds";
-		sys_log_id {
-			default-state = "off";
-			gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fan_gpio_leds {
-		compatible = "gpio-leds";
-		fan0_blue {
-			retain-state-shutdown;
-			default-state = "on";
-			gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
-		};
-		fan1_blue {
-			retain-state-shutdown;
-			default-state = "on";
-			gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
-		};
-		fan2_blue {
-			retain-state-shutdown;
-			default-state = "on";
-			gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
-		};
-		fan3_blue {
-			retain-state-shutdown;
-			default-state = "on";
-			gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
-		};
-		fan0_amber {
-			retain-state-shutdown;
-			default-state = "off";
-			gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
-		};
-		fan1_amber {
-			retain-state-shutdown;
-			default-state = "off";
-			gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
-		};
-		fan2_amber {
-			retain-state-shutdown;
-			default-state = "off";
-			gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
-		};
-		fan3_amber {
-			retain-state-shutdown;
-			default-state = "off";
-			gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	sled1_gpio_leds {
-		compatible = "gpio-leds";
-		sled1_amber {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
-		};
-		sled1_blue {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sled2_gpio_leds {
-		compatible = "gpio-leds";
-		sled2_amber {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
-		};
-		sled2_blue {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sled3_gpio_leds {
-		compatible = "gpio-leds";
-		sled3_amber {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
-		};
-		sled3_blue {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sled4_gpio_leds {
-		compatible = "gpio-leds";
-		sled4_amber {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
-		};
-		sled4_blue {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sled5_gpio_leds {
-		compatible = "gpio-leds";
-		sled5_amber {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
-		};
-		sled5_blue {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sled6_gpio_leds {
-		compatible = "gpio-leds";
-		sled6_amber {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
-		};
-		sled6_blue {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		presence-sled1 {
-			label = "presence-sled1";
-			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 2)>;
-		};
-		presence-sled2 {
-			label = "presence-sled2";
-			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 3)>;
-		};
-		presence-sled3 {
-			label = "presence-sled3";
-			gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 4)>;
-		};
-		presence-sled4 {
-			label = "presence-sled4";
-			gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 5)>;
-		};
-		presence-sled5 {
-			label = "presence-sled5";
-			gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 6)>;
-		};
-		presence-sled6 {
-			label = "presence-sled6";
-			gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 7)>;
-		};
-	};
-
-	vbus_sled1: vbus_sled1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus_sled1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vbus_sled2: vbus_sled2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus_sled2";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vbus_sled3: vbus_sled3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus_sled3";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vbus_sled4: vbus_sled4 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus_sled4";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vbus_sled5: vbus_sled5 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus_sled5";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vbus_sled6: vbus_sled6 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus_sled6";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&mac2 {
-	status = "okay";
-	phy-mode = "rgmii";
-	phy-handle = <&switchphy>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii3_default>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
-	};
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt-bmc";
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&spi2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	ina230@45 {
-		compatible = "ti,ina230";
-		reg = <0x45>;
-		shunt-resistor = <2000>;
-	};
-
-	mp5023@40 {
-		compatible = "mps,mp5023";
-		reg = <0x40>;
-	};
-
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-
-	sled1_ioexp41: pca9536@41 {
-		compatible = "nxp,pca9536";
-		reg = <0x41>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"SLED1_SWD_MUX", "SLED1_XRES_SWD_N",
-		"SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN";
-	};
-
-	sled1_ioexp: pca9539@76 {
-		compatible = "nxp,pca9539";
-		reg = <0x76>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
-
-		gpio-line-names =
-		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
-		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
-		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
-		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
-	};
-
-	sled1_leds: pca9552@67 {
-		compatible = "nxp,pca9552";
-		reg = <0x67>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
-		"","","","",
-		"","","","",
-		"","","","";
-	};
-
-	sled1_fusb302: typec-portc@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>;
-		vbus-supply = <&vbus_sled1>;
-
-		connector {
-			compatible = "usb-c-connector";
-			label = "USB-C";
-			power-role = "source";
-			data-role = "host";
-			pd-disable;
-			typec-power-opmode = "default";
-		};
-	};
-
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	ina230@45 {
-		compatible = "ti,ina230";
-		reg = <0x45>;
-		shunt-resistor = <2000>;
-	};
-
-	mp5023@40 {
-		compatible = "mps,mp5023";
-		reg = <0x40>;
-	};
-
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-
-	sled2_ioexp41: pca9536@41 {
-		compatible = "nxp,pca9536";
-		reg = <0x41>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"SLED2_SWD_MUX", "SLED2_XRES_SWD_N",
-		"SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN";
-	};
-
-	sled2_ioexp: pca9539@76 {
-		compatible = "nxp,pca9539";
-		reg = <0x76>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
-
-		gpio-line-names =
-		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
-		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
-		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
-		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
-	};
-
-	sled2_leds: pca9552@67 {
-		compatible = "nxp,pca9552";
-		reg = <0x67>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
-		"","","","",
-		"","","","",
-		"","","","";
-	};
-
-	sled2_fusb302: typec-portc@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>;
-		vbus-supply = <&vbus_sled2>;
-
-		connector {
-			compatible = "usb-c-connector";
-			label = "USB-C";
-			power-role = "source";
-			data-role = "host";
-			pd-disable;
-			typec-power-opmode = "default";
-		};
-	};
-
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	ina230@45 {
-		compatible = "ti,ina230";
-		reg = <0x45>;
-		shunt-resistor = <2000>;
-	};
-
-	mp5023@40 {
-		compatible = "mps,mp5023";
-		reg = <0x40>;
-	};
-
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-
-	sled3_ioexp41: pca9536@41 {
-		compatible = "nxp,pca9536";
-		reg = <0x41>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"SLED3_SWD_MUX", "SLED3_XRES_SWD_N",
-		"SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN";
-	};
-
-	sled3_ioexp: pca9539@76 {
-		compatible = "nxp,pca9539";
-		reg = <0x76>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
-
-		gpio-line-names =
-		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
-		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
-		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
-		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
-	};
-
-	sled3_leds: pca9552@67 {
-		compatible = "nxp,pca9552";
-		reg = <0x67>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
-		"","","","",
-		"","","","",
-		"","","","";
-	};
-
-	sled3_fusb302: typec-portc@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>;
-		vbus-supply = <&vbus_sled3>;
-
-		connector {
-			compatible = "usb-c-connector";
-			label = "USB-C";
-			power-role = "source";
-			data-role = "host";
-			pd-disable;
-			typec-power-opmode = "default";
-		};
-	};
-
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-	ina230@45 {
-		compatible = "ti,ina230";
-		reg = <0x45>;
-		shunt-resistor = <2000>;
-	};
-
-	mp5023@40 {
-		compatible = "mps,mp5023";
-		reg = <0x40>;
-	};
-
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-
-	sled4_ioexp41: pca9536@41 {
-		compatible = "nxp,pca9536";
-		reg = <0x41>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"SLED4_SWD_MUX", "SLED4_XRES_SWD_N",
-		"SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN";
-	};
-
-	sled4_ioexp: pca9539@76 {
-		compatible = "nxp,pca9539";
-		reg = <0x76>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
-
-		gpio-line-names =
-		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
-		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
-		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
-		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
-	};
-
-	sled4_leds: pca9552@67 {
-		compatible = "nxp,pca9552";
-		reg = <0x67>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
-		"","","","",
-		"","","","",
-		"","","","";
-	};
-
-	sled4_fusb302: typec-portc@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>;
-		vbus-supply = <&vbus_sled4>;
-
-		connector {
-			compatible = "usb-c-connector";
-			label = "USB-C";
-			power-role = "source";
-			data-role = "host";
-			pd-disable;
-			typec-power-opmode = "default";
-		};
-	};
-
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-	ina230@45 {
-		compatible = "ti,ina230";
-		reg = <0x45>;
-		shunt-resistor = <2000>;
-	};
-
-	mp5023@40 {
-		compatible = "mps,mp5023";
-		reg = <0x40>;
-	};
-
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-
-	sled5_ioexp41: pca9536@41 {
-		compatible = "nxp,pca9536";
-		reg = <0x41>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"SLED5_SWD_MUX", "SLED5_XRES_SWD_N",
-		"SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN";
-	};
-
-	sled5_ioexp: pca9539@76 {
-		compatible = "nxp,pca9539";
-		reg = <0x76>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
-
-		gpio-line-names =
-		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
-		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
-		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
-		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
-	};
-
-	sled5_leds: pca9552@67 {
-		compatible = "nxp,pca9552";
-		reg = <0x67>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
-		"","","","",
-		"","","","",
-		"","","","";
-	};
-
-	sled5_fusb302: typec-portc@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>;
-		vbus-supply = <&vbus_sled5>;
-
-		connector {
-			compatible = "usb-c-connector";
-			label = "USB-C";
-			power-role = "source";
-			data-role = "host";
-			pd-disable;
-			typec-power-opmode = "default";
-		};
-	};
-
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-	ina230@45 {
-		compatible = "ti,ina230";
-		reg = <0x45>;
-		shunt-resistor = <2000>;
-	};
-
-	mp5023@40 {
-		compatible = "mps,mp5023";
-		reg = <0x40>;
-	};
-
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-
-	sled6_ioexp41: pca9536@41 {
-		compatible = "nxp,pca9536";
-		reg = <0x41>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"SLED6_SWD_MUX", "SLED6_XRES_SWD_N",
-		"SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN";
-	};
-
-	sled6_ioexp: pca9539@76 {
-		compatible = "nxp,pca9539";
-		reg = <0x76>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
-
-		gpio-line-names =
-		"SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
-		"SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
-		"SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
-		"SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
-	};
-
-	sled6_leds: pca9552@67 {
-		compatible = "nxp,pca9552";
-		reg = <0x67>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
-		"","","","",
-		"","","","",
-		"","","","";
-	};
-
-	sled6_fusb302: typec-portc@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>;
-		vbus-supply = <&vbus_sled6>;
-
-		connector {
-			compatible = "usb-c-connector";
-			label = "USB-C";
-			power-role = "source";
-			data-role = "host";
-			pd-disable;
-			typec-power-opmode = "default";
-		};
-	};
-
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	eeprom@56 {
-		compatible = "atmel,24c64";
-		reg = <0x56>;
-	};
-
-	rtc@51 {
-		/* in-chip rtc disabled, use external rtc (battery-backed) */
-		compatible = "nxp,pcf85263";
-		reg = <0x51>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-
-	front_leds: pca9552@67 {
-		compatible = "nxp,pca9552";
-		reg = <0x67>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"led-fault-identify","power-p5v-stby-good",
-		"power-p1v0-dvdd-good","power-p1v0-avdd-good",
-		"","","","",
-		"","","","",
-		"","","","";
-	};
-};
-
-&i2c12 {
-	status = "okay";
-
-	adm1278@11 {
-		compatible = "adi,adm1278";
-		reg = <0x11>;
-		shunt-resistor-micro-ohms = <300>;
-		adi,volt-curr-sample-average = <128>;
-		adi,power-sample-average = <128>;
-	};
-
-	tmp421@4c {
-		compatible = "ti,tmp421";
-		reg = <0x4c>;
-	};
-
-	tmp421@4d {
-		compatible = "ti,tmp421";
-		reg = <0x4d>;
-	};
-
-	fan_leds: pca9552@67 {
-		compatible = "nxp,pca9552";
-		reg = <0x67>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"presence-fan0","presence-fan1",
-		"presence-fan2","presence-fan3",
-		"power-fan0-good","power-fan1-good",
-		"power-fan2-good","power-fan3-good",
-		"","","","",
-		"","","","";
-	};
-};
-
-&i2c13 {
-	multi-master;
-	aspeed,hw-timeout-ms = <1000>;
-	status = "okay";
-
-	//USB Debug Connector
-	ipmb13@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&gpio0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>;
-
-	gpio-line-names =
-	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N",
-			"SEL_SPI2_MUX","SPI2_MUX1",
-			"SPI2_MUX2","SPI2_MUX3",
-			"","FUSB302_SLED3_INT_N",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"BMC_SLED1_STCK","BMC_SLED2_STCK",
-			"BMC_SLED3_STCK","BMC_SLED4_STCK",
-			"BMC_SLED5_STCK","BMC_SLED6_STCK",
-			"","",
-	/*G0-G7*/	"BSM_FRU_WP","SWITCH_FRU_MUX","","FM_SOL_UART_CH_SEL",
-			"PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
-	/*H0-H7*/	"presence-riser1","presence-riser2",
-			"presence-sled1","presence-sled2",
-			"presence-sled3","presence-sled4",
-			"presence-sled5","presence-sled6",
-	/*I0-I7*/	"REV_ID0","",
-			"REV_ID1","REV_ID2",
-			"","BSM_FLASH_WP_STATUS",
-			"BMC_TPM_PRES_N","FUSB302_SLED6_INT_N",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","BMC_RTC_INT","","",
-	/*M0-M7*/	"ALERT_SLED1_N","ALERT_SLED2_N",
-			"ALERT_SLED3_N","ALERT_SLED4_N",
-			"ALERT_SLED5_N","ALERT_SLED6_N",
-			"","USB_DEBUG_PWR_BTN_N",
-	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
-			"LED_POSTCODE_2","LED_POSTCODE_3",
-			"LED_POSTCODE_4","LED_POSTCODE_5",
-			"LED_POSTCODE_6","LED_POSTCODE_7",
-	/*O0-O7*/	"","","","",
-			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
-	/*P0-P7*/	"","","","","","","","BMC_HEARTBEAT",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","","","","","","",
-	/*S0-S7*/	"","","","BAT_DETECT",
-			"BMC_BT_WP0_N","BMC_BT_WP1_N","","FUSB302_SLED4_INT_N",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"PWRGD_CNS_PSU","RST_BMC_MVL_N",
-			"P12V_AUX_ALERT1_N","PSU_PRSNT",
-			"USB2_SEL0_A","USB2_SEL1_A",
-			"USB2_SEL0_B","USB2_SEL1_B",
-	/*W0-W7*/	"RST_FRONT_IOEXP_N","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"BMC_SELF_HW_RST","BSM_PRSNT_N",
-			"BSM_FLASH_LATCH_N","FUSB302_SLED5_INT_N",
-			"","","","",
-	/*Z0-Z7*/	"","","","","","","","";
-};
-
-&adc0 {
-	vref = <1800>;
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
-		&pinctrl_adc2_default &pinctrl_adc3_default
-		&pinctrl_adc4_default &pinctrl_adc5_default
-		&pinctrl_adc6_default &pinctrl_adc7_default>;
-};
-
-&adc1 {
-	vref = <2500>;
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
-		&pinctrl_adc10_default &pinctrl_adc11_default
-		&pinctrl_adc12_default &pinctrl_adc13_default
-		&pinctrl_adc14_default &pinctrl_adc15_default>;
-};
-
-&mdio0 {
-	status = "okay";
-	/* TODO: Add Marvell 88E6191X */
-};
-
-&mdio3 {
-	status = "okay";
-	/* TODO: Add Marvell 88X3310 */
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&emmc_controller {
-	status = "okay";
-};
-
-&emmc {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl_gpiov2_unbiased_default: gpiov2 {
-		pins = "AD14";
-		bias-disable;
-	};
-};
-
-&wdt1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-	aspeed,reset-type = "soc";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-	aspeed,ext-pulse-duration = <256>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
deleted file mode 100644
index 5cd060029ea97..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
+++ /dev/null
@@ -1,544 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2020 Facebook Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include "ast2600-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Cloudripper BMC";
-	compatible = "facebook,cloudripper-bmc", "aspeed,ast2600";
-
-	aliases {
-		/*
-		 * PCA9548 (1-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (3-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c32 = &imux32;
-		i2c33 = &imux33;
-		i2c34 = &imux34;
-		i2c35 = &imux35;
-		i2c36 = &imux36;
-		i2c37 = &imux37;
-		i2c38 = &imux38;
-		i2c39 = &imux39;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * PDB (Power Delivery Board).
-		 */
-		i2c40 = &imux40;
-		i2c41 = &imux41;
-		i2c42 = &imux42;
-		i2c43 = &imux43;
-		i2c44 = &imux44;
-		i2c45 = &imux45;
-		i2c46 = &imux46;
-		i2c47 = &imux47;
-
-		/*
-		 * PCA9548 (15-0076) provides 8 channels connecting to
-		 * FCM (Fan Controller Module).
-		 */
-		i2c48 = &imux48;
-		i2c49 = &imux49;
-		i2c50 = &imux50;
-		i2c51 = &imux51;
-		i2c52 = &imux52;
-		i2c53 = &imux53;
-		i2c54 = &imux54;
-		i2c55 = &imux55;
-	};
-
-	spi_gpio: spi {
-		num-chipselects = <2>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
-			   <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
-
-		eeprom@1 {
-			compatible = "atmel,at93c46d";
-			spi-max-frequency = <250000>;
-			data-size = <16>;
-			spi-cs-high;
-			reg = <1>;
-		};
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-/*
- * "mdio1" is connected to the MDC/MDIO interface of the on-board
- * management switch (whose ports are connected to BMC, Host and front
- * panel ethernet port).
- */
-&mdio1 {
-	status = "okay";
-};
-
-&mdio3 {
-	status = "okay";
-
-	ethphy1: ethernet-phy@13 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0x0d>;
-	};
-};
-
-&mac3 {
-	status = "okay";
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii4_default>;
-};
-
-&i2c0 {
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c1 {
-	/*
-	 * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c2 {
-	/*
-	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
-	 * Controller Module).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c3 {
-	/*
-	 * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux32: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux33: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux34: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux35: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux36: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux37: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux38: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux39: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c6 {
-	lp5012@14 {
-		compatible = "ti,lp5012";
-		reg = <0x14>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		multi-led@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "sys";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-
-		multi-led@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "fan";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-
-		multi-led@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "psu";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-
-		multi-led@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "scm";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-	};
-};
-
-&i2c8 {
-	/*
-	 * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
-	 * Delivery Board).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux40: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux41: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux42: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux43: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux44: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux45: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux46: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux47: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c15 {
-	/*
-	 * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
-	 * Controller Module).
-	 */
-	i2c-switch@76 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x76>;
-		i2c-mux-idle-disconnect;
-
-		imux48: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux49: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux50: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux51: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux52: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux53: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux54: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux55: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
deleted file mode 100644
index 90a3f485c67a9..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
+++ /dev/null
@@ -1,1590 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Facebook Inc.
-/dts-v1/;
-
-#include "ast2500-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Backpack CMM BMC";
-	compatible = "facebook,cmm-bmc", "aspeed,ast2500";
-
-	aliases {
-		/*
-		 * Override the default uart aliases to avoid breaking
-		 * the legacy applications.
-		 */
-		serial0 = &uart5;
-		serial1 = &uart1;
-		serial2 = &uart3;
-		serial3 = &uart4;
-
-		/*
-		 * PCA9548 (1-0077) provides 8 channels for connecting to
-		 * 4 Line Cards and 4 Fabric Cards.
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (2-0071) provides 8 channels for connecting to
-		 * Power Distribution Board.
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (8-0077) provides 8 channels and the first 4
-		 * channels are connecting to 4 Fan Control Boards.
-		 */
-		i2c32 = &imux32;
-		i2c33 = &imux33;
-		i2c34 = &imux34;
-		i2c35 = &imux35;
-		i2c36 = &imux36;
-		i2c37 = &imux37;
-		i2c38 = &imux38;
-		i2c39 = &imux39;
-
-		/*
-		 * 2 PCA9548 (18-0070 & 18-0073), 16 channels connecting
-		 * to Line Card #1.
-		 */
-		i2c40 = &imux40;
-		i2c41 = &imux41;
-		i2c42 = &imux42;
-		i2c43 = &imux43;
-		i2c44 = &imux44;
-		i2c45 = &imux45;
-		i2c46 = &imux46;
-		i2c47 = &imux47;
-		i2c48 = &imux48;
-		i2c49 = &imux49;
-		i2c50 = &imux50;
-		i2c51 = &imux51;
-		i2c52 = &imux52;
-		i2c53 = &imux53;
-		i2c54 = &imux54;
-		i2c55 = &imux55;
-
-		/*
-		 * 2 PCA9548 (19-0070 & 19-0073), 16 channels connecting
-		 * to Line Card #2.
-		 */
-		i2c56 = &imux56;
-		i2c57 = &imux57;
-		i2c58 = &imux58;
-		i2c59 = &imux59;
-		i2c60 = &imux60;
-		i2c61 = &imux61;
-		i2c62 = &imux62;
-		i2c63 = &imux63;
-		i2c64 = &imux64;
-		i2c65 = &imux65;
-		i2c66 = &imux66;
-		i2c67 = &imux67;
-		i2c68 = &imux68;
-		i2c69 = &imux69;
-		i2c70 = &imux70;
-		i2c71 = &imux71;
-
-		/*
-		 * 2 PCA9548 (20-0070 & 20-0073), 16 channels connecting
-		 * to Line Card #3.
-		 */
-		i2c72 = &imux72;
-		i2c73 = &imux73;
-		i2c74 = &imux74;
-		i2c75 = &imux75;
-		i2c76 = &imux76;
-		i2c77 = &imux77;
-		i2c78 = &imux78;
-		i2c79 = &imux79;
-		i2c80 = &imux80;
-		i2c81 = &imux81;
-		i2c82 = &imux82;
-		i2c83 = &imux83;
-		i2c84 = &imux84;
-		i2c85 = &imux85;
-		i2c86 = &imux86;
-		i2c87 = &imux87;
-
-		/*
-		 * 2 PCA9548 (21-0070 & 21-0073), 16 channels connecting
-		 * to Line Card #4.
-		 */
-		i2c88 = &imux88;
-		i2c89 = &imux89;
-		i2c90 = &imux90;
-		i2c91 = &imux91;
-		i2c92 = &imux92;
-		i2c93 = &imux93;
-		i2c94 = &imux94;
-		i2c95 = &imux95;
-		i2c96 = &imux96;
-		i2c97 = &imux97;
-		i2c98 = &imux98;
-		i2c99 = &imux99;
-		i2c100 = &imux100;
-		i2c101 = &imux101;
-		i2c102 = &imux102;
-		i2c103 = &imux103;
-
-		/*
-		 * 2 PCA9548 (16-0070 & 16-0073), 16 channels connecting
-		 * to Fabric Card #1.
-		 */
-		i2c104 = &imux104;
-		i2c105 = &imux105;
-		i2c106 = &imux106;
-		i2c107 = &imux107;
-		i2c108 = &imux108;
-		i2c109 = &imux109;
-		i2c110 = &imux110;
-		i2c111 = &imux111;
-		i2c112 = &imux112;
-		i2c113 = &imux113;
-		i2c114 = &imux114;
-		i2c115 = &imux115;
-		i2c116 = &imux116;
-		i2c117 = &imux117;
-		i2c118 = &imux118;
-		i2c119 = &imux119;
-
-		/*
-		 * 2 PCA9548 (17-0070 & 17-0073), 16 channels connecting
-		 * to Fabric Card #2.
-		 */
-		i2c120 = &imux120;
-		i2c121 = &imux121;
-		i2c122 = &imux122;
-		i2c123 = &imux123;
-		i2c124 = &imux124;
-		i2c125 = &imux125;
-		i2c126 = &imux126;
-		i2c127 = &imux127;
-		i2c128 = &imux128;
-		i2c129 = &imux129;
-		i2c130 = &imux130;
-		i2c131 = &imux131;
-		i2c132 = &imux132;
-		i2c133 = &imux133;
-		i2c134 = &imux134;
-		i2c135 = &imux135;
-
-		/*
-		 * 2 PCA9548 (22-0070 & 22-0073), 16 channels connecting
-		 * to Fabric Card #3.
-		 */
-		i2c136 = &imux136;
-		i2c137 = &imux137;
-		i2c138 = &imux138;
-		i2c139 = &imux139;
-		i2c140 = &imux140;
-		i2c141 = &imux141;
-		i2c142 = &imux142;
-		i2c143 = &imux143;
-		i2c144 = &imux144;
-		i2c145 = &imux145;
-		i2c146 = &imux146;
-		i2c147 = &imux147;
-		i2c148 = &imux148;
-		i2c149 = &imux149;
-		i2c150 = &imux150;
-		i2c151 = &imux151;
-
-		/*
-		 * 2 PCA9548 (23-0070 & 23-0073), 16 channels connecting
-		 * to Fabric Card #4.
-		 */
-		i2c152 = &imux152;
-		i2c153 = &imux153;
-		i2c154 = &imux154;
-		i2c155 = &imux155;
-		i2c156 = &imux156;
-		i2c157 = &imux157;
-		i2c158 = &imux158;
-		i2c159 = &imux159;
-		i2c160 = &imux160;
-		i2c161 = &imux161;
-		i2c162 = &imux162;
-		i2c163 = &imux163;
-		i2c164 = &imux164;
-		i2c165 = &imux165;
-		i2c166 = &imux166;
-		i2c167 = &imux167;
-
-		/*
-		 * PCA9548 (32-0070), 8 channels connecting to Fan Control
-		 # Board #1.
-		 */
-		i2c168 = &imux168;
-		i2c169 = &imux169;
-		i2c170 = &imux170;
-		i2c171 = &imux171;
-		i2c172 = &imux172;
-		i2c173 = &imux173;
-		i2c174 = &imux174;
-		i2c175 = &imux175;
-
-		/*
-		 * PCA9548 (33-0070), 8 channels connecting to Fan Control
-		 # Board #2.
-		 */
-		i2c176 = &imux176;
-		i2c177 = &imux177;
-		i2c178 = &imux178;
-		i2c179 = &imux179;
-		i2c180 = &imux180;
-		i2c181 = &imux181;
-		i2c182 = &imux182;
-		i2c183 = &imux183;
-
-		/*
-		 * PCA9548 (34-0070), 8 channels connecting to Fan Control
-		 # Board #3.
-		 */
-		i2c184 = &imux184;
-		i2c185 = &imux185;
-		i2c186 = &imux186;
-		i2c187 = &imux187;
-		i2c188 = &imux188;
-		i2c189 = &imux189;
-		i2c190 = &imux190;
-		i2c191 = &imux191;
-
-		/*
-		 * PCA9548 (35-0070), 8 channels connecting to Fan Control
-		 # Board #4.
-		 */
-		i2c192 = &imux192;
-		i2c193 = &imux193;
-		i2c194 = &imux194;
-		i2c195 = &imux195;
-		i2c196 = &imux196;
-		i2c197 = &imux197;
-		i2c198 = &imux198;
-		i2c199 = &imux199;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-		bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlycon";
-	};
-
-	ast-adc-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
-	};
-};
-
-&uart1 {
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default
-		     &pinctrl_ncts1_default
-		     &pinctrl_ndcd1_default
-		     &pinctrl_ndsr1_default
-		     &pinctrl_ndtr1_default
-		     &pinctrl_nrts1_default>;
-};
-
-&uart3 {
-	pinctrl-0 = <&pinctrl_txd3_default
-		     &pinctrl_rxd3_default
-		     &pinctrl_ncts3_default
-		     &pinctrl_ndcd3_default
-		     &pinctrl_nri3_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-		     &pinctrl_rxd4_default>;
-};
-
-/*
- * I2C bus reserved for communication with COM-E.
- */
-&i2c0 {
-	status = "okay";
-};
-
-/*
- * I2C bus to Line Cards and Fabric Cards.
- */
-&i2c1 {
-	status = "okay";
-
-	i2c-switch@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-		i2c-mux-idle-disconnect;
-
-		/* To Fabric Card #1 */
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-switch@70 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x70>;
-				i2c-mux-idle-disconnect;
-
-				imux104: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux105: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux106: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux107: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux108: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux109: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux110: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux111: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux112: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux113: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux114: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux115: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux116: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux117: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux118: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux119: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/* To Fabric Card #2 */
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-switch@70 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x70>;
-				i2c-mux-idle-disconnect;
-
-				imux120: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux121: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux122: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux123: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux124: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux125: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux126: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux127: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux128: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux129: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux130: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux131: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux132: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux133: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux134: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux135: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/* To Line Card #1 */
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-switch@70 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x70>;
-				i2c-mux-idle-disconnect;
-
-				imux40: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux41: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux42: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux43: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux44: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux45: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux46: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux47: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux48: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux49: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux50: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux51: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux52: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux53: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux54: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux55: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/* To Line Card #2 */
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-switch@70 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x70>;
-				i2c-mux-idle-disconnect;
-
-				imux56: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux57: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux58: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux59: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux60: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux61: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux62: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux63: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux64: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux65: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux66: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux67: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux68: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux69: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux70: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux71: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/* To LC3 SCM */
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			i2c-switch@70 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x70>;
-				i2c-mux-idle-disconnect;
-
-				imux72: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux73: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux74: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux75: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux76: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux77: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux78: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux79: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux80: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux81: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux82: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux83: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux84: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux85: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux86: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux87: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/* To Line Card #4 */
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			i2c-switch@70 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x70>;
-				i2c-mux-idle-disconnect;
-
-				imux88: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux89: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux90: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux91: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux92: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux93: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux94: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux95: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux96: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux97: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux98: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux99: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux100: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux101: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux102: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux103: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/* To Fabric Card #3 */
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			i2c-switch@70 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x70>;
-				i2c-mux-idle-disconnect;
-
-				imux136: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux137: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux138: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux139: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux140: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux141: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux142: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux143: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux144: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux145: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux146: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux147: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux148: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux149: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux150: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux151: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/* To Fabric Card #4 */
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			i2c-switch@70 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x70>;
-				i2c-mux-idle-disconnect;
-
-				imux152: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux153: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux154: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux155: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux156: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux157: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux158: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux159: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux160: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux161: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux162: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux163: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux164: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux165: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux166: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux167: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-	};
-};
-
-/*
- * I2C bus to Power Distribution Board.
- */
-&i2c2 {
-	status = "okay";
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-/*
- * I2c bus connected with temperature sensors on CMM.
- */
-&i2c3 {
-	status = "okay";
-};
-
-/*
- * I2C bus reserved for communication with COM-E.
- */
-&i2c4 {
-	status = "okay";
-};
-
-/*
- * I2c bus connected with ADM1278.
- */
-&i2c5 {
-	status = "okay";
-};
-
-/*
- * I2c bus connected with I/O Expander.
- */
-&i2c6 {
-	status = "okay";
-};
-
-/*
- * I2c bus connected with I/O Expander and EPROMs.
- */
-&i2c7 {
-	status = "okay";
-};
-
-/*
- * I2C bus to Fan Control Boards.
- */
-&i2c8 {
-	status = "okay";
-
-	i2c-switch@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-		i2c-mux-idle-disconnect;
-
-		/* To Fan Control Board #1 */
-		imux32: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-switch@70 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x70>;
-				i2c-mux-idle-disconnect;
-
-				imux168: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux169: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux170: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux171: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux172: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux173: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux174: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux175: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/* To Fan Control Board #2 */
-		imux33: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-switch@70 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x70>;
-				i2c-mux-idle-disconnect;
-
-				imux176: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux177: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux178: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux179: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux180: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux181: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux182: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux183: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/* To Fan Control Board #3 */
-		imux34: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-switch@70 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x70>;
-				i2c-mux-idle-disconnect;
-
-				imux184: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux185: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux186: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux187: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux188: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux189: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux190: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux191: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/* To Fan Control Board #4 */
-		imux35: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-switch@70 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x70>;
-				i2c-mux-idle-disconnect;
-
-				imux192: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				imux193: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				imux194: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				imux195: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				imux196: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				imux197: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				imux198: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-				imux199: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		imux36: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux37: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux38: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux39: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-/*
- * I2C bus to CMM CPLD.
- */
-&i2c13 {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&vhub {
-	status = "disabled";
-};
-
-&sdhci0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sd1_default>;
-};
-
-&sdhci1 {
-	status = "disabled";
-};
-
-&fmc_flash0 {
-#include "facebook-bmc-flash-layout.dtsi"
-};
-
-&fmc_flash1 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		flash1@0 {
-			reg = <0x0 0x2000000>;
-			label = "flash1";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
deleted file mode 100644
index b5cd4c7800b05..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
+++ /dev/null
@@ -1,203 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2020 Facebook Inc.
-
-/dts-v1/;
-
-#include "ast2600-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Elbert BMC";
-	compatible = "facebook,elbert-bmc", "aspeed,ast2600";
-
-	aliases {
-		serial0 = &uart5;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-
-		/*
-		 * 8 child channels of PCA9548 2-0075.
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * 8 child channels of PCA9548 5-0075.
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-	};
-
-	spi_gpio: spi {
-		num-chipselects = <1>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
-	};
-};
-
-&lpc_ctrl {
-	status = "okay";
-};
-
-&kcs2 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca8>;
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-};
-
-&i2c2 {
-	i2c-switch@75 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x75>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c5 {
-	i2c-switch@75 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x75>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-/*
- * BMC's "mac3" controller is connected to BCM53134P's IMP_RGMII port
- * directly (fixed link, no PHY in between).
- * Note: BMC's "mdio0" controller is connected to BCM53134P's MDIO
- * interface, and the MDIO channel will be enabled in dts later, when
- * BCM53134 is added to "bcm53xx" DSA driver.
- */
-&mac3 {
-	status = "okay";
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii4_default>;
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
deleted file mode 100644
index 6b319f34a9b98..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
+++ /dev/null
@@ -1,1251 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2020 Facebook Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include "ast2600-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Fuji BMC";
-	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
-
-	aliases {
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (11-0077) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c40 = &imux40;
-		i2c41 = &imux41;
-		i2c42 = &imux42;
-		i2c43 = &imux43;
-		i2c44 = &imux44;
-		i2c45 = &imux45;
-		i2c46 = &imux46;
-		i2c47 = &imux47;
-
-		/*
-		 * PCA9548 (24-0071) provides 8 channels connecting to
-		 * PDB-Left.
-		 */
-		i2c48 = &imux48;
-		i2c49 = &imux49;
-		i2c50 = &imux50;
-		i2c51 = &imux51;
-		i2c52 = &imux52;
-		i2c53 = &imux53;
-		i2c54 = &imux54;
-		i2c55 = &imux55;
-
-		/*
-		 * PCA9548 (25-0072) provides 8 channels connecting to
-		 * PDB-Right.
-		 */
-		i2c56 = &imux56;
-		i2c57 = &imux57;
-		i2c58 = &imux58;
-		i2c59 = &imux59;
-		i2c60 = &imux60;
-		i2c61 = &imux61;
-		i2c62 = &imux62;
-		i2c63 = &imux63;
-
-		/*
-		 * PCA9548 (26-0076) provides 8 channels connecting to
-		 * FCM1.
-		 */
-		i2c64 = &imux64;
-		i2c65 = &imux65;
-		i2c66 = &imux66;
-		i2c67 = &imux67;
-		i2c68 = &imux68;
-		i2c69 = &imux69;
-		i2c70 = &imux70;
-		i2c71 = &imux71;
-
-		/*
-		 * PCA9548 (27-0076) provides 8 channels connecting to
-		 * FCM2.
-		 */
-		i2c72 = &imux72;
-		i2c73 = &imux73;
-		i2c74 = &imux74;
-		i2c75 = &imux75;
-		i2c76 = &imux76;
-		i2c77 = &imux77;
-		i2c78 = &imux78;
-		i2c79 = &imux79;
-
-		/*
-		 * PCA9548 (40-0076) provides 8 channels connecting to
-		 * PIM1.
-		 */
-		i2c80 = &imux80;
-		i2c81 = &imux81;
-		i2c82 = &imux82;
-		i2c83 = &imux83;
-		i2c84 = &imux84;
-		i2c85 = &imux85;
-		i2c86 = &imux86;
-		i2c87 = &imux87;
-
-		/*
-		 * PCA9548 (41-0076) provides 8 channels connecting to
-		 * PIM2.
-		 */
-		i2c88 = &imux88;
-		i2c89 = &imux89;
-		i2c90 = &imux90;
-		i2c91 = &imux91;
-		i2c92 = &imux92;
-		i2c93 = &imux93;
-		i2c94 = &imux94;
-		i2c95 = &imux95;
-
-		/*
-		 * PCA9548 (42-0076) provides 8 channels connecting to
-		 * PIM3.
-		 */
-		i2c96 = &imux96;
-		i2c97 = &imux97;
-		i2c98 = &imux98;
-		i2c99 = &imux99;
-		i2c100 = &imux100;
-		i2c101 = &imux101;
-		i2c102 = &imux102;
-		i2c103 = &imux103;
-
-		/*
-		 * PCA9548 (43-0076) provides 8 channels connecting to
-		 * PIM4.
-		 */
-		i2c104 = &imux104;
-		i2c105 = &imux105;
-		i2c106 = &imux106;
-		i2c107 = &imux107;
-		i2c108 = &imux108;
-		i2c109 = &imux109;
-		i2c110 = &imux110;
-		i2c111 = &imux111;
-
-		/*
-		 * PCA9548 (44-0076) provides 8 channels connecting to
-		 * PIM5.
-		 */
-		i2c112 = &imux112;
-		i2c113 = &imux113;
-		i2c114 = &imux114;
-		i2c115 = &imux115;
-		i2c116 = &imux116;
-		i2c117 = &imux117;
-		i2c118 = &imux118;
-		i2c119 = &imux119;
-
-		/*
-		 * PCA9548 (45-0076) provides 8 channels connecting to
-		 * PIM6.
-		 */
-		i2c120 = &imux120;
-		i2c121 = &imux121;
-		i2c122 = &imux122;
-		i2c123 = &imux123;
-		i2c124 = &imux124;
-		i2c125 = &imux125;
-		i2c126 = &imux126;
-		i2c127 = &imux127;
-
-		/*
-		 * PCA9548 (46-0076) provides 8 channels connecting to
-		 * PIM7.
-		 */
-		i2c128 = &imux128;
-		i2c129 = &imux129;
-		i2c130 = &imux130;
-		i2c131 = &imux131;
-		i2c132 = &imux132;
-		i2c133 = &imux133;
-		i2c134 = &imux134;
-		i2c135 = &imux135;
-
-		/*
-		 * PCA9548 (47-0076) provides 8 channels connecting to
-		 * PIM8.
-		 */
-		i2c136 = &imux136;
-		i2c137 = &imux137;
-		i2c138 = &imux138;
-		i2c139 = &imux139;
-		i2c140 = &imux140;
-		i2c141 = &imux141;
-		i2c142 = &imux142;
-		i2c143 = &imux143;
-	};
-
-	spi_gpio: spi {
-		num-chipselects = <3>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
-			   <0>,	/* device reg=<1> does not exist */
-			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
-
-		eeprom@2 {
-			compatible = "atmel,at93c46d";
-			spi-max-frequency = <250000>;
-			data-size = <16>;
-			spi-cs-high;
-			reg = <2>;
-		};
-	};
-};
-
-&i2c0 {
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c2 {
-	/*
-	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
-	 * Controller Module).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adm1278@10 {
-				compatible = "adi,adm1278";
-				reg = <0x10>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				shunt-resistor-micro-ohms = <1500>;
-			};
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c8 {
-	/*
-	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-switch@71 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x71>;
-				i2c-mux-idle-disconnect;
-
-				imux48: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux49: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux50: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-
-					lp5012@14 {
-						compatible = "ti,lp5012";
-						reg = <0x14>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						multi-led@0 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <0>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "sys";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@1 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <1>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "fan";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@2 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <2>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "psu";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@3 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <3>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "smb";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-					};
-				};
-
-				imux51: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux52: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux53: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux54: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux55: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-switch@72 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72>;
-				i2c-mux-idle-disconnect;
-
-				imux56: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux57: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux58: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux59: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux60: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux61: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux62: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux63: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux64: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux65: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux66: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux67: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-
-					adm1278@10 {
-						compatible = "adi,adm1278";
-						reg = <0x10>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						shunt-resistor-micro-ohms = <250>;
-					};
-				};
-
-				imux68: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux69: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux70: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux71: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux72: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux73: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux74: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux75: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-
-					adm1278@10 {
-						compatible = "adi,adm1278";
-						reg = <0x10>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						shunt-resistor-micro-ohms = <250>;
-					};
-				};
-
-				imux76: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux77: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux78: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux79: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	/*
-	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-switch@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-		i2c-mux-idle-disconnect;
-
-		imux40: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux80: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux81: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux82: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux83: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux84: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux85: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux86: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux87: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux41: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux88: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux89: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux90: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux91: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux92: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux93: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux94: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux95: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux42: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux96: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux97: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux98: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux99: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux100: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux101: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux102: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux103: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux43: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux104: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux105: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux106: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux107: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux108: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux109: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux110: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux111: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux44: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux112: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux113: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux114: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux115: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux116: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux117: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux118: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux119: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux45: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux120: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux121: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux122: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux123: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux124: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux125: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux126: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux127: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux46: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux128: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux129: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux130: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux131: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux132: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux133: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux134: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux135: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux47: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux136: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux137: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux138: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux139: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux140: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux141: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux142: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux143: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&mdio1 {
-	status = "okay";
-
-	ethphy3: ethernet-phy@13 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0x0d>;
-	};
-};
-
-&mac3 {
-	status = "okay";
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii4_default>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts
deleted file mode 100644
index 60e875ac24614..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2020 Facebook Inc.
-/dts-v1/;
-
-#include "ast2400-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Galaxy 100 BMC";
-	compatible = "facebook,galaxy100-bmc", "aspeed,ast2400";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
-	};
-
-	ast-adc-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 3>, <&adc 4>, <&adc 8>, <&adc 9>;
-	};
-};
-
-&wdt2 {
-	status = "okay";
-	aspeed,reset-type = "system";
-};
-
-&fmc {
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "spi0.1";
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			flash1@0 {
-				reg = <0x0 0x2000000>;
-				label = "flash1";
-			};
-		};
-	};
-};
-
-
-&i2c9 {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
deleted file mode 100644
index 7a53f54833a03..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
+++ /dev/null
@@ -1,294 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2022 Facebook Inc.
-
-/dts-v1/;
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-#include <dt-bindings/i2c/i2c.h>
-
-/ {
-	model = "Facebook Greatlakes BMC";
-	compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
-
-	aliases {
-		serial4 = &uart5;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
-				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
-				<&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
-				<&adc1 5>, <&adc1 6>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&wdt1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-	aspeed,reset-type = "soc";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-	aspeed,ext-pulse-duration = <256>;
-};
-
-&mac3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii4_default>;
-	no-hw-checksum;
-	use-ncsi;
-	mlx,multi-host;
-	ncsi-ctrl,start-redo-probe;
-	ncsi-ctrl,no-channel-monitor;
-	ncsi-package = <1>;
-	ncsi-channel = <1>;
-	ncsi-rexmit = <1>;
-	ncsi-timeout = <2>;
-};
-
-&rtc {
-	status = "okay";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-64.dtsi"
-	};
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc2";
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	multi-master;
-	ipmb@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	multi-master;
-	ipmb@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	multi-master;
-	ipmb@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-	multi-master;
-	ipmb@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-	mctp-controller;
-	temperature-sensor@1f {
-		compatible = "ti,tmp421";
-		reg = <0x1f>;
-	};
-	// NIC EEPROM
-	eeprom@50 {
-		compatible = "st,24c32";
-		reg = <0x50>;
-	};
-	mctp@10 {
-		compatible = "mctp-i2c-controller";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-	multi-master;
-	ipmb@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-	eeprom@54 {
-		compatible = "atmel,24c128";
-		reg = <0x54>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-	temperature-sensor@4f {
-		compatible = "lm75";
-		reg = <0x4f>;
-	};
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&adc0 {
-	ref_voltage = <2500>;
-	status = "okay";
-	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
-			&pinctrl_adc2_default &pinctrl_adc3_default
-			&pinctrl_adc4_default &pinctrl_adc5_default
-			&pinctrl_adc6_default &pinctrl_adc7_default>;
-};
-
-&adc1 {
-	ref_voltage = <2500>;
-	status = "okay";
-	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
-			&pinctrl_adc11_default &pinctrl_adc12_default
-			&pinctrl_adc13_default &pinctrl_adc14_default>;
-};
-
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&gpio0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
-
-	gpio-line-names =
-	/*A0-A7*/ "","","","","","","","",
-	/*B0-B7*/ "power-bmc-nic","presence-ocp-debug",
-		  "power-bmc-slot1","power-bmc-slot2",
-		  "power-bmc-slot3","power-bmc-slot4","","",
-	/*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary",
-		  "reset-cause-nic-secondary","","","",
-	/*D0-D7*/ "","","","","","","","",
-	/*E0-E7*/ "","","","","","","","",
-	/*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button",
-		  "slot3-bmc-reset-button","slot4-bmc-reset-button",
-		  "","","","presence-emmc",
-	/*G0-G7*/ "","","","","","","","",
-	/*H0-H7*/ "","","","",
-		  "presence-mb-slot1","presence-mb-slot2",
-		  "presence-mb-slot3","presence-mb-slot4",
-	/*I0-I7*/ "","","","","","","bb-bmc-button","",
-	/*J0-J7*/ "","","","","","","","",
-	/*K0-K7*/ "","","","","","","","",
-	/*L0-L7*/ "","","","","","","","",
-	/*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","",
-	/*N0-N7*/ "","","","","bmc-ready","","","",
-	/*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable",
-	/*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable",
-		  "reset-cause-pcie-slot1","reset-cause-pcie-slot2",
-		  "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","",
-	/*Q0-Q7*/ "","","","","","","","",
-	/*R0-R7*/ "","","","","","","","",
-	/*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","",
-	/*T0-T7*/ "","","","","","","","",
-	/*U0-U7*/ "","","","","","","","GND",
-	/*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button",
-		  "bmc-slot3-ac-button","bmc-slot4-ac-button",
-		  "","","","",
-	/*W0-W7*/ "","","","","","","","",
-	/*X0-X7*/ "","","","","","","","",
-	/*Y0-Y7*/ "","","","reset-cause-emmc","","","","",
-	/*Z0-Z7*/ "","","","","","","","";
-};
-
-&gpio1 {
-	gpio-line-names =
-	/*18A0-18A7*/ "","","","","","","","",
-	/*18B0-18B7*/ "","","","","","","","",
-	/*18C0-18C7*/ "","","","","","","","",
-	/*18D0-18D7*/ "","","","","","","","",
-	/*18E0-18E3*/ "","","","","","","","";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
deleted file mode 100644
index 230d16cd99672..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
+++ /dev/null
@@ -1,1339 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Facebook Inc.
-/dts-v1/;
-
-#include "ast2500-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Minipack 100 BMC";
-	compatible = "facebook,minipack-bmc", "aspeed,ast2500";
-
-	aliases {
-		/*
-		 * Override the default serial aliases to avoid breaking
-		 * the legacy applications.
-		 */
-		serial0 = &uart5;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-
-		/*
-		 * i2c switch 2-0070, pca9548, 8 child channels assigned
-		 * with bus number 16-23.
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * i2c switch 8-0070, pca9548, 8 child channels assigned
-		 * with bus number 24-31.
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * i2c switch 9-0070, pca9548, 8 child channels assigned
-		 * with bus number 32-39.
-		 */
-		i2c32 = &imux32;
-		i2c33 = &imux33;
-		i2c34 = &imux34;
-		i2c35 = &imux35;
-		i2c36 = &imux36;
-		i2c37 = &imux37;
-		i2c38 = &imux38;
-		i2c39 = &imux39;
-
-		/*
-		 * i2c switch 11-0070, pca9548, 8 child channels assigned
-		 * with bus number 40-47.
-		 */
-		i2c40 = &imux40;
-		i2c41 = &imux41;
-		i2c42 = &imux42;
-		i2c43 = &imux43;
-		i2c44 = &imux44;
-		i2c45 = &imux45;
-		i2c46 = &imux46;
-		i2c47 = &imux47;
-
-		/*
-		 * I2C Switch 24-0071 (channel #0 of 8-0070): 8 channels for
-		 * connecting to left PDB (Power Distribution Board).
-		 */
-		i2c48 = &imux48;
-		i2c49 = &imux49;
-		i2c50 = &imux50;
-		i2c51 = &imux51;
-		i2c52 = &imux52;
-		i2c53 = &imux53;
-		i2c54 = &imux54;
-		i2c55 = &imux55;
-
-		/*
-		 * I2C Switch 25-0072 (channel #1 of 8-0070): 8 channels for
-		 * connecting to right PDB (Power Distribution Board).
-		 */
-		i2c56 = &imux56;
-		i2c57 = &imux57;
-		i2c58 = &imux58;
-		i2c59 = &imux59;
-		i2c60 = &imux60;
-		i2c61 = &imux61;
-		i2c62 = &imux62;
-		i2c63 = &imux63;
-
-		/*
-		 * I2C Switch 26-0076 (channel #2 of 8-0070): 8 channels for
-		 * connecting to top FCM (Fan Control Module).
-		 */
-		i2c64 = &imux64;
-		i2c65 = &imux65;
-		i2c66 = &imux66;
-		i2c67 = &imux67;
-		i2c68 = &imux68;
-		i2c69 = &imux69;
-		i2c70 = &imux70;
-		i2c71 = &imux71;
-
-		/*
-		 * I2C Switch 27-0076 (channel #3 of 8-0070): 8 channels for
-		 * connecting to bottom FCM (Fan Control Module).
-		 */
-		i2c72 = &imux72;
-		i2c73 = &imux73;
-		i2c74 = &imux74;
-		i2c75 = &imux75;
-		i2c76 = &imux76;
-		i2c77 = &imux77;
-		i2c78 = &imux78;
-		i2c79 = &imux79;
-
-		/*
-		 * I2C Switch 40-0073 (channel #0 of 11-0070): connecting
-		 * to PIM (Port Interface Module) #1 (1-based).
-		 */
-		i2c80 = &imux80;
-		i2c81 = &imux81;
-		i2c82 = &imux82;
-		i2c83 = &imux83;
-		i2c84 = &imux84;
-		i2c85 = &imux85;
-		i2c86 = &imux86;
-		i2c87 = &imux87;
-
-		/*
-		 * I2C Switch 41-0073 (channel #1 of 11-0070): connecting
-		 * to PIM (Port Interface Module) #2 (1-based).
-		 */
-		i2c88 = &imux88;
-		i2c89 = &imux89;
-		i2c90 = &imux90;
-		i2c91 = &imux91;
-		i2c92 = &imux92;
-		i2c93 = &imux93;
-		i2c94 = &imux94;
-		i2c95 = &imux95;
-
-		/*
-		 * I2C Switch 42-0073 (channel #2 of 11-0070): connecting
-		 * to PIM (Port Interface Module) #3 (1-based).
-		 */
-		i2c96 = &imux96;
-		i2c97 = &imux97;
-		i2c98 = &imux98;
-		i2c99 = &imux99;
-		i2c100 = &imux100;
-		i2c101 = &imux101;
-		i2c102 = &imux102;
-		i2c103 = &imux103;
-
-		/*
-		 * I2C Switch 43-0073 (channel #3 of 11-0070): connecting
-		 * to PIM (Port Interface Module) #4 (1-based).
-		 */
-		i2c104 = &imux104;
-		i2c105 = &imux105;
-		i2c106 = &imux106;
-		i2c107 = &imux107;
-		i2c108 = &imux108;
-		i2c109 = &imux109;
-		i2c110 = &imux110;
-		i2c111 = &imux111;
-
-		/*
-		 * I2C Switch 44-0073 (channel #4 of 11-0070): connecting
-		 * to PIM (Port Interface Module) #5 (1-based).
-		 */
-		i2c112 = &imux112;
-		i2c113 = &imux113;
-		i2c114 = &imux114;
-		i2c115 = &imux115;
-		i2c116 = &imux116;
-		i2c117 = &imux117;
-		i2c118 = &imux118;
-		i2c119 = &imux119;
-
-		/*
-		 * I2C Switch 45-0073 (channel #5 of 11-0070): connecting
-		 * to PIM (Port Interface Module) #6 (1-based).
-		 */
-		i2c120 = &imux120;
-		i2c121 = &imux121;
-		i2c122 = &imux122;
-		i2c123 = &imux123;
-		i2c124 = &imux124;
-		i2c125 = &imux125;
-		i2c126 = &imux126;
-		i2c127 = &imux127;
-
-		/*
-		 * I2C Switch 46-0073 (channel #6 of 11-0070): connecting
-		 * to PIM (Port Interface Module) #7 (1-based).
-		 */
-		i2c128 = &imux128;
-		i2c129 = &imux129;
-		i2c130 = &imux130;
-		i2c131 = &imux131;
-		i2c132 = &imux132;
-		i2c133 = &imux133;
-		i2c134 = &imux134;
-		i2c135 = &imux135;
-
-		/*
-		 * I2C Switch 47-0073 (channel #7 of 11-0070): connecting
-		 * to PIM (Port Interface Module) #8 (1-based).
-		 */
-		i2c136 = &imux136;
-		i2c137 = &imux137;
-		i2c138 = &imux138;
-		i2c139 = &imux139;
-		i2c140 = &imux140;
-		i2c141 = &imux141;
-		i2c142 = &imux142;
-		i2c143 = &imux143;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-		bootargs = "debug console=ttyS1,9600n8 root=/dev/ram rw";
-	};
-};
-
-&wdt2 {
-	status = "okay";
-	aspeed,reset-type = "system";
-};
-
-/*
- * Both firmware flashes are 64MB on Minipack BMC.
- */
-&fmc_flash0 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/*
-		 * u-boot partition: 384KB.
-		 */
-		u-boot@0 {
-			reg = <0x0 0x60000>;
-			label = "u-boot";
-		};
-
-		/*
-		 * u-boot environment variables: 128KB.
-		 */
-		u-boot-env@60000 {
-			reg = <0x60000 0x20000>;
-			label = "env";
-		};
-
-		/*
-		 * FIT image: 55.5 MB.
-		 */
-		fit@80000 {
-			reg = <0x80000 0x3780000>;
-			label = "fit";
-		};
-
-		/*
-		 * "data0" partition (8MB) is reserved for persistent
-		 * data store.
-		 */
-		data0@3800000 {
-			reg = <0x3800000 0x800000>;
-			label = "data0";
-		};
-
-		/*
-		 * "flash0" partition (covering the entire flash) is
-		 * explicitly created to avoid breaking legacy applications.
-		 */
-		flash0@0 {
-			reg = <0x0 0x4000000>;
-			label = "flash0";
-		};
-	};
-};
-
-&fmc_flash1 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		flash1@0 {
-			reg = <0x0 0x4000000>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default
-		     &pinctrl_ncts1_default
-		     &pinctrl_ndsr1_default
-		     &pinctrl_ndtr1_default
-		     &pinctrl_nrts1_default>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-		     &pinctrl_rxd2_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-		     &pinctrl_rxd4_default>;
-};
-
-&i2c0 {
-	status = "okay";
-	bus-frequency = <400000>;
-	multi-master;
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/*
-	 * I2C Switch 2-0070 is connecting to SCM (System Controller
-	 * Module).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-	multi-master;
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		/*
-		 * I2C Switch 8-0070 channel #0: connecting to left PDB
-		 * (Power Distribution Board).
-		 */
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-switch@71 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x71>;
-				i2c-mux-idle-disconnect;
-
-				imux48: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux49: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux50: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux51: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux52: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux53: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux54: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux55: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/*
-		 * I2C Switch 8-0070 channel #1: connecting to right PDB
-		 * (Power Distribution Board).
-		 */
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-switch@72 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72>;
-				i2c-mux-idle-disconnect;
-
-				imux56: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux57: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux58: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux59: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux60: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux61: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux62: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux63: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/*
-		 * I2C Switch 8-0070 channel #2: connecting to top FCM
-		 * (Fan Control Module).
-		 */
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux64: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux65: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux66: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux67: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux68: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux69: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux70: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux71: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/*
-		 * I2C Switch 8-0070 channel #3: connecting to bottom
-		 * FCM (Fan Control Module).
-		 */
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux72: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux73: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux74: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux75: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux76: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux77: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux78: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux79: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	/*
-	 * I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB
-	 * (Switch Main Board).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux32: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux33: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux34: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux35: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux36: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux37: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux38: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux39: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		/*
-		 * I2C Switch 11-0070 channel #0: connecting to PIM
-		 * (Port Interface Module) #1 (1-based).
-		 */
-		imux40: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux80: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux81: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux82: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux83: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux84: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux85: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux86: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux87: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/*
-		 * I2C Switch 11-0070 channel #1: connecting to PIM
-		 * (Port Interface Module) #2 (1-based).
-		 */
-		imux41: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux88: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux89: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux90: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux91: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux92: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux93: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux94: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux95: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/*
-		 * I2C Switch 11-0070 channel #2: connecting to PIM
-		 * (Port Interface Module) #3 (1-based).
-		 */
-		imux42: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux96: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux97: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux98: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux99: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux100: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux101: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux102: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux103: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/*
-		 * I2C Switch 11-0070 channel #3: connecting to PIM
-		 * (Port Interface Module) #4 (1-based).
-		 */
-		imux43: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux104: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux105: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux106: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux107: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux108: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux109: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux110: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux111: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/*
-		 * I2C Switch 11-0070 channel #4: connecting to PIM
-		 * (Port Interface Module) #5 (1-based).
-		 */
-		imux44: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux112: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux113: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux114: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux115: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux116: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux117: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux118: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux119: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/*
-		 * I2C Switch 11-0070 channel #5: connecting to PIM
-		 * (Port Interface Module) #6 (1-based).
-		 */
-		imux45: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux120: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux121: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux122: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux123: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux124: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux125: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux126: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux127: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/*
-		 * I2C Switch 11-0070 channel #6: connecting to PIM
-		 * (Port Interface Module) #7 (1-based).
-		 */
-		imux46: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux128: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux129: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux130: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux131: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux132: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux133: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux134: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux135: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-
-		/*
-		 * I2C Switch 11-0070 channel #7: connecting to PIM
-		 * (Port Interface Module) #8 (1-based).
-		 */
-		imux47: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-				i2c-mux-idle-disconnect;
-
-				imux136: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux137: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux138: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux139: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux140: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux141: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux142: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux143: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-		};
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
deleted file mode 100644
index b6b16356f571a..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ /dev/null
@@ -1,549 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Facebook Inc.
-// Author: Vijay Khemka <vijaykhemka@fb.com>
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-
-/ {
-	model = "Facebook TiogaPass BMC";
-	compatible = "facebook,tiogapass-bmc", "aspeed,ast2500";
-	aliases {
-		serial0 = &uart1;
-		serial4 = &uart5;
-
-		/*
-		 * Hardcode the bus number of i2c switches' channels to
-		 * avoid breaking the legacy applications.
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-	};
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
-	};
-
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-	};
-};
-
-&lpc_snoop {
-	status = "okay";
-	snoop-ports = <0x80>;
-};
-
-&lpc_ctrl {
-	// Enable lpc clock
-	status = "okay";
-};
-
-&uart1 {
-	// Host Console
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
-};
-
-&uart2 {
-	// SoL Host Console
-	status = "okay";
-};
-
-&uart3 {
-	// SoL BMC Console
-	status = "okay";
-};
-
-&uart5 {
-	// BMC Console
-	status = "okay";
-};
-
-&kcs2 {
-	// BMC KCS channel 2
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca8>;
-};
-
-&kcs3 {
-	// BMC KCS channel 3
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-};
-
-&gpio {
-	status = "okay";
-	gpio-line-names =
-	/*A0-A7*/	"BMC_CPLD_FPGA_SEL","","","","","","","",
-	/*B0-B7*/	"","BMC_DEBUG_EN","","","","BMC_PPIN","PS_PWROK",
-			"IRQ_PVDDQ_GHJ_VRHOT_LVT3",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"BIOS_MRC_DEBUG_MSG_DIS","BOARD_REV_ID0","",
-			"BOARD_REV_ID1","IRQ_DIMM_SAVE_LVT3","BOARD_REV_ID2",
-			"CPU_ERR0_LVT3_BMC","CPU_ERR1_LVT3_BMC",
-	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON",
-			"POWER_OUT","NMI_BUTTON","","CPU0_PROCHOT_LVT3_ BMC",
-			"CPU1_PROCHOT_LVT3_ BMC",
-	/*F0-F7*/	"IRQ_PVDDQ_ABC_VRHOT_LVT3","",
-			"IRQ_PVCCIN_CPU0_VRHOT_LVC3",
-			"IRQ_PVCCIN_CPU1_VRHOT_LVC3",
-			"IRQ_PVDDQ_KLM_VRHOT_LVT3","","P3VBAT_BRIDGE_EN","",
-	/*G0-G7*/	"CPU_ERR2_LVT3","CPU_CATERR_LVT3","PCH_BMC_THERMTRIP",
-			"CPU0_SKTOCC_LVT3","","","","BIOS_SMI_ACTIVE",
-	/*H0-H7*/	"LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2",
-			"LED_POST_CODE_3","LED_POST_CODE_4","LED_POST_CODE_5",
-			"LED_POST_CODE_6","LED_POST_CODE_7",
-	/*I0-I7*/	"CPU0_FIVR_FAULT_LVT3","CPU1_FIVR_FAULT_LVT3",
-			"FORCE_ADR","UV_ADR_TRIGGER_EN","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"IRQ_UV_DETECT","IRQ_OC_DETECT","HSC_TIMER_EXP","",
-			"MEM_THERM_EVENT_PCH","PMBUS_ALERT_BUF_EN","","",
-	/*M0-M7*/	"CPU0_RC_ERROR","CPU1_RC_ERROR","","OC_DETECT_EN",
-			"CPU0_THERMTRIP_LATCH_LVT3",
-			"CPU1_THERMTRIP_LATCH_LVT3","","",
-	/*N0-N7*/	"","","","CPU_MSMI_LVT3","","BIOS_SPI_BMC_CTRL","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"BOARD_SKU_ID0","BOARD_SKU_ID1","BOARD_SKU_ID2",
-			"BOARD_SKU_ID3","BOARD_SKU_ID4","BMC_PREQ",
-			"BMC_PWR_DEBUG","RST_RSMRST",
-	/*Q0-Q7*/	"","","","","UARTSW_LSB","UARTSW_MSB",
-			"POST_CARD_PRES_BMC","PE_BMC_WAKE",
-	/*R0-R7*/	"","","BMC_TCK_MUX_SEL","BMC_PRDY",
-			"BMC_XDP_PRSNT_IN","RST_BMC_PLTRST_BUF","SLT_CFG0",
-			"SLT_CFG1",
-	/*S0-S7*/	"THROTTLE","BMC_READY","","HSC_SMBUS_SWITCH_EN","",
-			"","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","BMC_FAULT","","",
-	/*V0-V7*/	"","","","FAST_PROCHOT_EN","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","GLOBAL_RST_WARN",
-			"CPU0_MEMABC_MEMHOT_LVT3_BMC",
-			"CPU0_MEMDEF_MEMHOT_LVT3_BMC",
-			"CPU1_MEMGHJ_MEMHOT_LVT3_BMC",
-			"CPU1_MEMKLM_MEMHOT_LVT3_BMC",
-	/*Y0-Y7*/	"SIO_S3","SIO_S5","BMC_JTAG_SEL","SIO_ONCONTROL","",
-			"","","",
-	/*Z0-Z7*/	"","SIO_POWER_GOOD","IRQ_PVDDQ_DEF_VRHOT_LVT3","",
-			"","","","",
-	/*AA0-AA7*/	"CPU1_SKTOCC_LVT3","IRQ_SML1_PMBUS_ALERT",
-			"SERVER_POWER_LED","","PECI_MUX_SELECT","UV_HIGH_SET",
-			"","POST_COMPLETE",
-	/*AB0-AB7*/	"IRQ_HSC_FAULT","OCP_MEZZA_PRES","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii2_default>;
-	use-ncsi;
-};
-
-&adc {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	//Airmax Conn B, CPU0 PIROM, CPU1 PIROM
-};
-
-&i2c1 {
-	status = "okay";
-	//X24 Riser
-	i2c-switch@71 {
-		compatible = "nxp,pca9544";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			ina230@45 {
-				compatible = "ti,ina230";
-				reg = <0x45>;
-			};
-
-			tmp75@48 {
-				compatible = "ti,tmp75";
-				reg = <0x48>;
-			};
-
-			tmp421@49 {
-				compatible = "ti,tmp75";
-				reg = <0x49>;
-			};
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-				pagesize = <32>;
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9546";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-
-				imux20: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux21: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux22: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux23: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-			};
-
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			ina230@45 {
-				compatible = "ti,ina230";
-				reg = <0x45>;
-			};
-
-			tmp421@48 {
-				compatible = "ti,tmp75";
-				reg = <0x48>;
-			};
-
-			tmp421@49 {
-				compatible = "ti,tmp75";
-				reg = <0x49>;
-			};
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-				pagesize = <32>;
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9546";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-
-				imux24: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux25: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux26: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux27: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-			};
-
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			ina230@45 {
-				compatible = "ti,ina230";
-				reg = <0x45>;
-			};
-
-			tmp421@48 {
-				compatible = "ti,tmp75";
-				reg = <0x48>;
-			};
-
-			tmp421@49 {
-				compatible = "ti,tmp75";
-				reg = <0x49>;
-			};
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-				pagesize = <32>;
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9546";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-
-				imux28: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux29: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux30: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux31: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-			};
-
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-switch@40 {
-				compatible = "ti,ina230";
-				reg = <0x40>;
-			};
-
-			i2c-switch@41 {
-				compatible = "ti,ina230";
-				reg = <0x41>;
-			};
-
-			i2c-switch@45 {
-				compatible = "ti,ina230";
-				reg = <0x45>;
-			};
-
-		};
-
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	// Mezz Management SMBus
-};
-
-&i2c3 {
-	status = "okay";
-	// SMBus to Board ID EEPROM
-};
-
-&i2c4 {
-	status = "okay";
-	// BMC Debug Header
-	ipmb0@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-	// CPU Voltage regulators
-	regulator@48 {
-		compatible = "infineon,pxe1610";
-		reg = <0x48>;
-	};
-	regulator@4a {
-		compatible = "infineon,pxe1610";
-		reg = <0x4a>;
-	};
-	regulator@50 {
-		compatible = "infineon,pxe1610";
-		reg = <0x50>;
-	};
-	regulator@52 {
-		compatible = "infineon,pxe1610";
-		reg = <0x52>;
-	};
-	regulator@58 {
-		compatible = "infineon,pxe1610";
-		reg = <0x58>;
-	};
-	regulator@5a {
-		compatible = "infineon,pxe1610";
-		reg = <0x5a>;
-	};
-	regulator@68 {
-		compatible = "infineon,pxe1610";
-		reg = <0x68>;
-	};
-	regulator@70 {
-		compatible = "infineon,pxe1610";
-		reg = <0x70>;
-	};
-	regulator@72 {
-		compatible = "infineon,pxe1610";
-		reg = <0x72>;
-	};
-};
-
-&i2c6 {
-	status = "okay";
-	tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-	};
-	tmp421@4e {
-		compatible = "ti,tmp421";
-		reg = <0x4e>;
-	};
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-		pagesize = <32>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-	//HSC, AirMax Conn A
-	adm1278@45 {
-		compatible = "adm1275";
-		reg = <0x45>;
-		shunt-resistor-micro-ohms = <250>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-	tmp421@1f {
-		compatible = "ti,tmp421";
-		reg = <0x1f>;
-	};
-	//Mezz Sensor SMBus
-};
-
-&i2c9 {
-	status = "okay";
-	//USB Debug Connector
-	ipmb0@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
deleted file mode 100644
index 584efa5284500..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Facebook Inc.
-/dts-v1/;
-
-#include "ast2400-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Wedge 100 BMC";
-	compatible = "facebook,wedge100-bmc", "aspeed,ast2400";
-
-	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
-	};
-
-	ast-adc-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
-	};
-};
-
-&wdt2 {
-	status = "okay";
-	aspeed,reset-type = "system";
-};
-
-&fmc {
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "spi0.1";
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			flash1@0 {
-				reg = <0x0 0x2000000>;
-				label = "flash1";
-			};
-		};
-	};
-};
-
-&i2c7 {
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-
-&vhub {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
deleted file mode 100644
index 6624855d8ebdf..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Facebook Inc.
-/dts-v1/;
-
-#include "ast2400-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Wedge 40 BMC";
-	compatible = "facebook,wedge40-bmc", "aspeed,ast2400";
-
-	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
-	};
-
-	ast-adc-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
-	};
-};
-
-&wdt2 {
-	status = "disabled";
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default
-		     &pinctrl_pwm1_default
-		     &pinctrl_pwm6_default
-		     &pinctrl_pwm7_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
-	};
-
-	fan@6 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
-	};
-
-	fan@7 {
-		reg = <0x07>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
deleted file mode 100644
index ed305948386f2..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
+++ /dev/null
@@ -1,374 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2019 Facebook Inc.
-/dts-v1/;
-
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include "ast2500-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Wedge 400 BMC";
-	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
-
-	aliases {
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (11-0076) provides 8 channels connecting to
-		 * FCM (Fan Controller Module).
-		 */
-		i2c32 = &imux32;
-		i2c33 = &imux33;
-		i2c34 = &imux34;
-		i2c35 = &imux35;
-		i2c36 = &imux36;
-		i2c37 = &imux37;
-		i2c38 = &imux38;
-		i2c39 = &imux39;
-
-		spi2 = &spi_gpio;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
-	};
-
-	ast-adc-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
-	};
-
-	/*
-	 * GPIO-based SPI Master is required to access SPI TPM, because
-	 * full-duplex SPI transactions are not supported by ASPEED SPI
-	 * Controllers.
-	 */
-	spi_gpio: spi {
-		status = "okay";
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-		gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
-			spi-max-frequency = <33000000>;
-			reg = <0>;
-		};
-	};
-};
-
-/*
- * Both firmware flashes are 128MB on Wedge400 BMC.
- */
-&fmc_flash0 {
-#include "facebook-bmc-flash-layout-128.dtsi"
-};
-
-&fmc_flash1 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		flash1@0 {
-			reg = <0x0 0x8000000>;
-			label = "flash1";
-		};
-	};
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-		     &pinctrl_rxd2_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-		     &pinctrl_rxd4_default>;
-};
-
-/*
- * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
- * communication.
- */
-&i2c0 {
-	status = "okay";
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	i2c-switch@76 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x76>;
-		i2c-mux-idle-disconnect;
-
-		imux32: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux33: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux34: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux35: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux36: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux37: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux38: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux39: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&sdhci1 {
-	/*
-	 * DMA mode needs to be disabled to avoid conflicts with UHCI
-	 * Controller in AST2500 SoC.
-	 */
-	sdhci-caps-mask = <0x0 0x580000>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
deleted file mode 100644
index 5e61058742171..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Facebook Inc.
-/dts-v1/;
-
-#include "ast2500-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook YAMP 100 BMC";
-	compatible = "facebook,yamp-bmc", "aspeed,ast2500";
-
-	aliases {
-		/*
-		 * Override the default uart aliases to avoid breaking
-		 * the legacy applications.
-		 */
-		serial0 = &uart5;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
-	};
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-		     &pinctrl_rxd2_default>;
-};
-
-&mac0 {
-	status = "okay";
-	use-ncsi;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-};
-
-&mac1 {
-	status = "disabled";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	i2c-switch@75 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x75>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&fmc_flash0 {
-#include "facebook-bmc-flash-layout.dtsi"
-};
-
-&fmc_flash1 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		flash1@0 {
-			reg = <0x0 0x2000000>;
-			label = "flash1";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
deleted file mode 100644
index 6bf2ff85a40e7..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
+++ /dev/null
@@ -1,236 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright (c) 2018 Facebook Inc.
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/i2c/i2c.h>
-
-/ {
-	model = "Facebook Yosemitev2 BMC";
-	compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
-	aliases {
-		serial4 = &uart5;
-	};
-	chosen {
-		stdout-path = &uart5;
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	iio-hwmon {
-		// VOLATAGE SENSOR
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0> , <&adc 1> , <&adc 2> ,  <&adc 3> ,
-		<&adc 4> , <&adc 5> , <&adc 6> ,  <&adc 7> ,
-		<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
-		<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-	};
-};
-&uart1 {
-	// Host1 Console
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
-};
-
-&uart2 {
-	// Host2 Console
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-		     &pinctrl_rxd2_default>;
-
-};
-
-&uart3 {
-	// Host3 Console
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default
-		     &pinctrl_rxd3_default>;
-};
-
-&uart4 {
-	// Host4 Console
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-		     &pinctrl_rxd4_default>;
-};
-
-&uart5 {
-	// BMC Console
-	status = "okay";
-};
-
-&vuart {
-	// Virtual UART
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	use-ncsi;
-	mlx,multi-host;
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-			&pinctrl_adc1_default
-			&pinctrl_adc2_default
-			&pinctrl_adc3_default
-			&pinctrl_adc4_default
-			&pinctrl_adc5_default
-			&pinctrl_adc6_default
-			&pinctrl_adc7_default
-			&pinctrl_adc8_default
-			&pinctrl_adc9_default
-			&pinctrl_adc10_default
-			&pinctrl_adc11_default
-			&pinctrl_adc12_default
-			&pinctrl_adc13_default
-			&pinctrl_adc14_default
-			&pinctrl_adc15_default>;
-};
-
-&i2c1 {
-	//Host1 IPMB bus
-	status = "okay";
-	multi-master;
-	ipmb1@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&i2c3 {
-	//Host2 IPMB bus
-	status = "okay";
-	multi-master;
-	ipmb3@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&i2c5 {
-	//Host3 IPMB bus
-	status = "okay";
-	multi-master;
-	ipmb5@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&i2c7 {
-	//Host4 IPMB bus
-	status = "okay";
-	multi-master;
-	ipmb7@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-	//FRU EEPROM
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-		pagesize = <32>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-	tmp421@4e {
-	//INLET TEMP
-		compatible = "ti,tmp421";
-		reg = <0x4e>;
-	};
-	//OUTLET TEMP
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-	//HSC
-	adm1278@40 {
-		compatible = "adi,adm1278";
-		reg = <0x40>;
-	};
-};
-
-&i2c11 {
-	status = "okay";
-	//MEZZ_TEMP_SENSOR
-	tmp421@1f {
-		compatible = "ti,tmp421";
-		reg = <0x1f>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-	// Debug Card
-	multi-master;
-	ipmb13@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	//FSC
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
deleted file mode 100644
index 81902cbe662cb..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
+++ /dev/null
@@ -1,915 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2022 IBM Corp.
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Bonnell";
-	compatible = "ibm,bonnell-bmc", "aspeed,ast2600";
-
-	aliases {
-		i2c100 = &cfam0_i2c0;
-		i2c101 = &cfam0_i2c1;
-		i2c110 = &cfam0_i2c10;
-		i2c111 = &cfam0_i2c11;
-		i2c112 = &cfam0_i2c12;
-		i2c113 = &cfam0_i2c13;
-		i2c114 = &cfam0_i2c14;
-		i2c115 = &cfam0_i2c15;
-		i2c202 = &cfam1_i2c2;
-		i2c203 = &cfam1_i2c3;
-		i2c210 = &cfam1_i2c10;
-		i2c211 = &cfam1_i2c11;
-		i2c214 = &cfam1_i2c14;
-		i2c215 = &cfam1_i2c15;
-		i2c216 = &cfam1_i2c16;
-		i2c217 = &cfam1_i2c17;
-
-		serial4 = &uart5;
-		i2c16 = &i2c11mux0chn0;
-		i2c17 = &i2c11mux0chn1;
-		i2c18 = &i2c11mux0chn2;
-		i2c19 = &i2c11mux0chn3;
-
-		spi10 = &cfam0_spi0;
-		spi11 = &cfam0_spi1;
-		spi12 = &cfam0_spi2;
-		spi13 = &cfam0_spi3;
-		spi20 = &cfam1_spi0;
-		spi21 = &cfam1_spi1;
-		spi22 = &cfam1_spi2;
-		spi23 = &cfam1_spi3;
-
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200n8 earlycon";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		ramoops@b3e00000 {
-			compatible = "ramoops";
-			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
-			record-size = <0x8000>;
-			console-size = <0x8000>;
-			ftrace-size = <0x8000>;
-			pmsg-size = <0x8000>;
-			max-reason = <3>; /* KMSG_DUMP_EMERG */
-		};
-
-		/* LPC FW cycle bridge region requires natural alignment */
-		flash_memory: region@b4000000 {
-			no-map;
-			reg = <0xb4000000 0x04000000>; /* 64M */
-		};
-
-		/* VGA region is dictated by hardware strapping */
-		vga_memory: region@bf000000 {
-			no-map;
-			compatible = "shared-dma-pool";
-			reg = <0xbf000000 0x01000000>;  /* 16M */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		fan0 {
-			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		rear-enc-id0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		rear-enc-fault0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <1000>;
-
-		fan0-presence {
-			label = "fan0-presence";
-			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		fan1-presence {
-			label = "fan1-presence";
-			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc1 7>;
-	};
-};
-
-&adc1 {
-	status = "okay";
-	aspeed,int-vref-microvolt = <2500000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
-		&pinctrl_adc10_default &pinctrl_adc11_default
-		&pinctrl_adc12_default &pinctrl_adc13_default
-		&pinctrl_adc14_default &pinctrl_adc15_default>;
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&gpio0 {
-	gpio-line-names =
-		/*A0-A7*/	"","","","","","","","",
-		/*B0-B7*/	"","","","","","","checkstop","",
-		/*C0-C7*/	"","","","","","","","",
-		/*D0-D7*/	"","","","","","","","",
-		/*E0-E7*/	"","","","","","","","",
-		/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","",
-		/*G0-G7*/	"fan0","fan1","","","","","","",
-		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
-		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
-		/*J0-J7*/	"","","","","","","","",
-		/*K0-K7*/	"","","","","","","","",
-		/*L0-L7*/	"","","","","","","","",
-		/*M0-M7*/	"","","","","","","","",
-		/*N0-N7*/	"","","","","","","","",
-		/*O0-O7*/	"","","","usb-power","","","","",
-		/*P0-P7*/	"","","","","","","","",
-		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
-		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
-		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","","",
-		/*T0-T7*/	"","","","","","","","",
-		/*U0-U7*/	"","","","","","","","",
-		/*V0-V7*/	"","","","","","","","",
-		/*W0-W7*/	"","","","","","","","",
-		/*X0-X7*/	"","","","","","","","",
-		/*Y0-Y7*/	"","","","","","","","",
-		/*Z0-Z7*/	"","","","","","","","";
-
-	usb_power {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
-		output-high;
-	};
-};
-
-&emmc_controller {
-	status = "okay";
-};
-
-&pinctrl_emmc_default {
-	bias-disable;
-};
-
-&emmc {
-	status = "okay";
-	clk-phase-mmc-hs200 = <180>, <180>;
-};
-
-&fsim0 {
-	status = "okay";
-
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
-
-	cfam@0,0 {
-		reg = <0 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <0>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OMI01 */
-			};
-
-			cfam0_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OMI23 */
-			};
-
-			cfam0_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam0_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam0_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam0_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam0_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam0_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ0: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub0: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&fsi_hub0 {
-	cfam@1,0 {
-		reg = <1 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <1>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OMI45 */
-			};
-
-			cfam1_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OMI67 */
-			};
-
-			cfam1_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam1_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam1_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam1_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam1_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam1_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ1: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub1: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-};
-
-&ibt {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	tca9554@20 {
-		compatible = "ti,tca9554";
-		reg = <0x20>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "",
-			"RUSSEL_FW_I2C_ENABLE_N",
-			"RUSSEL_OPPANEL_PRESENCE_N",
-			"BLYTH_OPPANEL_PRESENCE_N",
-			"CPU_TPM_CARD_PRESENT_N",
-			"",
-			"",
-			"DASD_BP_PRESENT_N";
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	ucd90160@64 {
-		compatible = "ti,ucd90160";
-		reg = <0x64>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-
-	power-supply@5a {
-		compatible = "acbel,fsg032";
-		reg = <0x5a>;
-	};
-
-	power-supply@5b {
-		compatible = "acbel,fsg032";
-		reg = <0x5b>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	multi-master;
-	status = "okay";
-
-	si7021-a20@40 {
-		compatible = "silabs,si7020";
-		reg = <0x40>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan0: fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-		};
-
-		fan1: fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-		};
-	};
-
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "front-sys-id0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "front-check-log0";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "front-enc-fault1";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "front-sys-pwron0";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	ibm-panel@62 {
-		compatible = "ibm,op-panel";
-		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
-	};
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "",
-			"APSS_RESET_N",
-			"",
-			"N_MODE_CPU_N",
-			"",
-			"",
-			"P10_DCM_PRESENT",
-			"";
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	tca9554@20 {
-		compatible = "ti,tca9554";
-		reg = <0x20>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "BOOT_RCVRY_TWI",
-			"BOOT_RCVRY_UART",
-			"",
-			"",
-			"",
-			"",
-			"",
-			"PE_SWITCH_RSTB_N";
-	};
-
-	tmp435@4c {
-		compatible = "ti,tmp435";
-		reg = <0x4c>;
-	};
-
-	pca9849@75 {
-		compatible = "nxp,pca9849";
-		reg = <0x75>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c11mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c11mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c11mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c11mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c12 {
-	status = "okay";
-
-	tpm@2e {
-		compatible = "nuvoton,npct75x";
-		reg = <0x2e>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c13 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "nvme0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "nvme1";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "nvme2";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "nvme3";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-};
-
-&i2c14 {
-	status = "okay";
-};
-
-&i2c15 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&vuart1 {
-	status = "okay";
-};
-
-&vuart2 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-};
-
-&mac2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii3_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
-		 <&syscon ASPEED_CLK_MAC3RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	status = "okay";
-};
-
-&xdma {
-	status = "okay";
-	memory-region = <&vga_memory>;
-};
-
-&kcs2 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca8 0xcac>;
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
deleted file mode 100644
index c6f8f20914d19..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ /dev/null
@@ -1,3723 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2020 IBM Corp.
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Everest";
-	compatible = "ibm,everest-bmc", "aspeed,ast2600";
-
-	aliases {
-		i2c100 = &cfam0_i2c0;
-		i2c101 = &cfam0_i2c1;
-		i2c110 = &cfam0_i2c10;
-		i2c111 = &cfam0_i2c11;
-		i2c112 = &cfam0_i2c12;
-		i2c113 = &cfam0_i2c13;
-		i2c114 = &cfam0_i2c14;
-		i2c115 = &cfam0_i2c15;
-		i2c202 = &cfam1_i2c2;
-		i2c203 = &cfam1_i2c3;
-		i2c210 = &cfam1_i2c10;
-		i2c211 = &cfam1_i2c11;
-		i2c214 = &cfam1_i2c14;
-		i2c215 = &cfam1_i2c15;
-		i2c216 = &cfam1_i2c16;
-		i2c217 = &cfam1_i2c17;
-		i2c300 = &cfam2_i2c0;
-		i2c301 = &cfam2_i2c1;
-		i2c310 = &cfam2_i2c10;
-		i2c311 = &cfam2_i2c11;
-		i2c312 = &cfam2_i2c12;
-		i2c313 = &cfam2_i2c13;
-		i2c314 = &cfam2_i2c14;
-		i2c315 = &cfam2_i2c15;
-		i2c402 = &cfam3_i2c2;
-		i2c403 = &cfam3_i2c3;
-		i2c410 = &cfam3_i2c10;
-		i2c411 = &cfam3_i2c11;
-		i2c414 = &cfam3_i2c14;
-		i2c415 = &cfam3_i2c15;
-		i2c416 = &cfam3_i2c16;
-		i2c417 = &cfam3_i2c17;
-		i2c500 = &cfam4_i2c0;
-		i2c501 = &cfam4_i2c1;
-		i2c510 = &cfam4_i2c10;
-		i2c511 = &cfam4_i2c11;
-		i2c512 = &cfam4_i2c12;
-		i2c513 = &cfam4_i2c13;
-		i2c514 = &cfam4_i2c14;
-		i2c515 = &cfam4_i2c15;
-		i2c602 = &cfam5_i2c2;
-		i2c603 = &cfam5_i2c3;
-		i2c610 = &cfam5_i2c10;
-		i2c611 = &cfam5_i2c11;
-		i2c614 = &cfam5_i2c14;
-		i2c615 = &cfam5_i2c15;
-		i2c616 = &cfam5_i2c16;
-		i2c617 = &cfam5_i2c17;
-		i2c700 = &cfam6_i2c0;
-		i2c701 = &cfam6_i2c1;
-		i2c710 = &cfam6_i2c10;
-		i2c711 = &cfam6_i2c11;
-		i2c712 = &cfam6_i2c12;
-		i2c713 = &cfam6_i2c13;
-		i2c714 = &cfam6_i2c14;
-		i2c715 = &cfam6_i2c15;
-		i2c802 = &cfam7_i2c2;
-		i2c803 = &cfam7_i2c3;
-		i2c810 = &cfam7_i2c10;
-		i2c811 = &cfam7_i2c11;
-		i2c814 = &cfam7_i2c14;
-		i2c815 = &cfam7_i2c15;
-		i2c816 = &cfam7_i2c16;
-		i2c817 = &cfam7_i2c17;
-
-		i2c16 = &i2c4mux0chn0;
-		i2c17 = &i2c4mux0chn1;
-		i2c18 = &i2c4mux0chn2;
-		i2c19 = &i2c5mux0chn0;
-		i2c20 = &i2c5mux0chn1;
-		i2c21 = &i2c5mux0chn2;
-		i2c22 = &i2c5mux0chn3;
-		i2c23 = &i2c6mux0chn0;
-		i2c24 = &i2c6mux0chn1;
-		i2c25 = &i2c6mux0chn2;
-		i2c26 = &i2c6mux0chn3;
-		i2c27 = &i2c14mux0chn0;
-		i2c28 = &i2c14mux0chn1;
-		i2c29 = &i2c14mux0chn2;
-		i2c30 = &i2c14mux0chn3;
-		i2c31 = &i2c14mux1chn0;
-		i2c32 = &i2c14mux1chn1;
-		i2c33 = &i2c14mux1chn2;
-		i2c34 = &i2c14mux1chn3;
-		i2c35 = &i2c15mux0chn0;
-		i2c36 = &i2c15mux0chn1;
-		i2c37 = &i2c15mux0chn2;
-		i2c38 = &i2c15mux0chn3;
-		i2c39 = &i2c15mux1chn0;
-		i2c40 = &i2c15mux1chn1;
-		i2c41 = &i2c15mux1chn2;
-		i2c42 = &i2c15mux1chn3;
-		i2c43 = &i2c15mux2chn0;
-		i2c44 = &i2c15mux2chn1;
-		i2c45 = &i2c15mux2chn2;
-		i2c46 = &i2c15mux2chn3;
-		i2c47 = &i2c8mux0chn0;
-		i2c48 = &i2c8mux0chn1;
-
-		serial4 = &uart5;
-
-		spi10 = &cfam0_spi0;
-		spi11 = &cfam0_spi1;
-		spi12 = &cfam0_spi2;
-		spi13 = &cfam0_spi3;
-		spi20 = &cfam1_spi0;
-		spi21 = &cfam1_spi1;
-		spi22 = &cfam1_spi2;
-		spi23 = &cfam1_spi3;
-		spi30 = &cfam2_spi0;
-		spi31 = &cfam2_spi1;
-		spi32 = &cfam2_spi2;
-		spi33 = &cfam2_spi3;
-		spi40 = &cfam3_spi0;
-		spi41 = &cfam3_spi1;
-		spi42 = &cfam3_spi2;
-		spi43 = &cfam3_spi3;
-		spi50 = &cfam4_spi0;
-		spi51 = &cfam4_spi1;
-		spi52 = &cfam4_spi2;
-		spi53 = &cfam4_spi3;
-		spi60 = &cfam5_spi0;
-		spi61 = &cfam5_spi1;
-		spi62 = &cfam5_spi2;
-		spi63 = &cfam5_spi3;
-		spi70 = &cfam6_spi0;
-		spi71 = &cfam6_spi1;
-		spi72 = &cfam6_spi2;
-		spi73 = &cfam6_spi3;
-		spi80 = &cfam7_spi0;
-		spi81 = &cfam7_spi1;
-		spi82 = &cfam7_spi2;
-		spi83 = &cfam7_spi3;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		event_log: tcg_event_log@b3d00000 {
-			no-map;
-			reg = <0xb3d00000 0x100000>;
-		};
-
-		ramoops@b3e00000 {
-			compatible = "ramoops";
-			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
-			record-size = <0x8000>;
-			console-size = <0x8000>;
-			ftrace-size = <0x8000>;
-			pmsg-size = <0x8000>;
-			max-reason = <3>; /* KMSG_DUMP_EMERG */
-		};
-
-		/* LPC FW cycle bridge region requires natural alignment */
-		flash_memory: region@b4000000 {
-			no-map;
-			reg = <0xb4000000 0x04000000>; /* 64M */
-		};
-
-		/* VGA region is dictated by hardware strapping */
-		vga_memory: region@bf000000 {
-			no-map;
-			compatible = "shared-dma-pool";
-			reg = <0xbf000000 0x01000000>; /* 16M */
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
-			linux,code = <15>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
-			linux,code = <14>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* RTC battery fault LED at the back */
-		led-rtc-battery {
-			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		/* BMC Card fault LED at the back */
-		led-bmc {
-			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		/* Enclosure Identify LED at the back */
-		led-rear-enc-id0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		/* Enclosure fault LED at the back */
-		led-rear-enc-fault0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
-		};
-
-		/* PCIE slot power LED */
-		led-pcieslot-power {
-			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc1 7>;
-	};
-};
-
-&adc1 {
-	status = "okay";
-	aspeed,int-vref-microvolt = <2500000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
-				 &pinctrl_adc10_default &pinctrl_adc11_default
-				 &pinctrl_adc12_default &pinctrl_adc13_default
-				 &pinctrl_adc14_default &pinctrl_adc15_default>;
-};
-
-&gpio0 {
-	gpio-line-names =
-	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"USERSPACE_RSTIND_BUFF","","","","","","checkstop","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
-	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","usb-power","","","","",
-	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
-	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
-	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
-	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/   "","","","","","","","";
-
-	usb_power {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
-		output-high;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	pca1: pca9552@62 {
-		compatible = "nxp,pca9552";
-		reg = <0x62>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"presence-ps0",
-			"presence-ps1",
-			"presence-ps2",
-			"presence-ps3",
-			"presence-pdb",
-			"presence-tpm",
-			"", "",
-			"presence-cp0",
-			"presence-cp1",
-			"presence-cp2",
-			"presence-cp3",
-			"presence-dasd",
-			"presence-lcd-op",
-			"presence-base-op",
-			"";
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	eeprom@54 {
-		compatible = "atmel,24c128";
-		reg = <0x54>;
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps";
-		reg = <0x69>;
-	};
-
-	power-supply@6b {
-		compatible = "ibm,cffps";
-		reg = <0x6b>;
-	};
-
-	power-supply@6d {
-		compatible = "ibm,cffps";
-		reg = <0x6d>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	pca2: pca9552@65 {
-		compatible = "nxp,pca9552";
-		reg = <0x65>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"presence-cable-card1",
-			"presence-cable-card2",
-			"presence-cable-card3",
-			"presence-cable-card4",
-			"presence-cable-card5",
-			"expander-cable-card1",
-			"expander-cable-card2",
-			"expander-cable-card3",
-			"expander-cable-card4",
-			"expander-cable-card5";
-	};
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c4mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-
-			pca_cable_card_c01: pca9551@62 {
-				compatible = "nxp,pca9551";
-				reg = <0x62>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c01-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c01-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c4mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-
-			pca_cable_card_c02: pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c02-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c02-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c4mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-
-			pca_cable_card_c03: pca9551@61 {
-				compatible = "nxp,pca9551";
-				reg = <0x61>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c03-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c03-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	pca3: pca9552@66 {
-		compatible = "nxp,pca9552";
-		reg = <0x66>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"presence-cable-card6",
-			"presence-cable-card7",
-			"presence-cable-card8",
-			"presence-cable-card9",
-			"presence-cable-card10",
-			"presence-cable-card11",
-			"expander-cable-card6",
-			"expander-cable-card7",
-			"expander-cable-card8",
-			"expander-cable-card9",
-			"expander-cable-card10",
-			"expander-cable-card11";
-	};
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c5mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-
-			pca_cable_card_c04: pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c04-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c04-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c5mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-
-			pca_cable_card_c05: pca9551@61 {
-				compatible = "nxp,pca9551";
-				reg = <0x61>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c05-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c05-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c5mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-
-			pca_cable_card_c06: pca9551@62 {
-				compatible = "nxp,pca9551";
-				reg = <0x62>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c06-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c06-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c5mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-
-			pca_cable_card_c07: pca9551@63 {
-				compatible = "nxp,pca9551";
-				reg = <0x63>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c07-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c07-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c6mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@50 {
-			compatible = "atmel,24c64";
-			reg = <0x50>;
-			};
-
-			pca_cable_card_c08: pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c08-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c08-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c6mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-
-			pca_cable_card_c09: pca9551@62 {
-				compatible = "nxp,pca9551";
-				reg = <0x62>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c09-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c09-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c6mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-
-			pca_cable_card_c10: pca9551@63 {
-				compatible = "nxp,pca9551";
-				reg = <0x63>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c10-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c10-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c6mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-
-			pca_cable_card_c11: pca9551@61 {
-				compatible = "nxp,pca9551";
-				reg = <0x61>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c11-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c11-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-	};
-
-	pca_pcie_slot: pca9552@65 {
-		compatible = "nxp,pca9552";
-		reg = <0x65>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@1 {
-			label = "pcieslot-c01";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "pcieslot-c02";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "pcieslot-c03";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "pcieslot-c04";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "pcieslot-c05";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "pcieslot-c06";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "pcieslot-c07";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "pcieslot-c08";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "pcieslot-c09";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "pcieslot-c10";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "pcieslot-c11";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	pic0_dimm: pca9552@31 {
-		compatible = "ibm,pca9552";
-		reg = <0x31>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm1";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm2";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm3";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm4";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm5";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm6";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm7";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm8";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm9";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm10";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm11";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm12";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm13";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm14";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm15";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic1_dimm: pca9552@32 {
-		compatible = "ibm,pca9552";
-		reg = <0x32>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm16";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm17";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm18";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm19";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm20";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm21";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm22";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm23";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm24";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm25";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm26";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm27";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm28";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm29";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm30";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm31";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic2_dimm: pca9552@33 {
-		compatible = "ibm,pca9552";
-		reg = <0x33>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm32";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm33";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm34";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm35";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm36";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm37";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm38";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm39";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm40";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm41";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm42";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm43";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm44";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm45";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm46";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm47";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic3_dimm: pca9552@30 {
-		compatible = "ibm,pca9552";
-		reg = <0x30>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm48";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm49";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm50";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm51";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm52";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm53";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm54";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm55";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm56";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm57";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm58";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm59";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm60";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm61";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm62";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm63";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic0_vrm_misc: pca9552@34 {
-		compatible = "ibm,pca9552";
-		reg = <0x34>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "planar";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "tpm";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "cpu3-c61";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "cpu0-c14";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "opencapi-connector3";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "opencapi-connector4";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "opencapi-connector5";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "vrm4";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "vrm5";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "vrm6";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "vrm7";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "vrm12";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "vrm13";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "vrm14";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "vrm15";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic1_vrm_misc: pca9552@35 {
-		compatible = "ibm,pca9552";
-		reg = <0x35>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "dasd-backplane";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "power-distribution";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "cpu1-c19";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "cpu2-c56";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "opencapi-connector0";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "opencapi-connector1";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "opencapi-connector2";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "vrm0";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "vrm1";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "vrm2";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "vrm3";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "vrm8";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "vrm9";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "vrm10";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "vrm11";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	ucd90320@11 {
-		compatible = "ti,ucd90320";
-		reg = <0x11>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c8mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c8mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c128";
-		reg = <0x53>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c128";
-		reg = <0x53>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c128";
-		reg = <0x53>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-
-	tpm@2e {
-		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
-		reg = <0x2e>;
-		memory-region = <&event_log>;
-	};
-};
-
-&i2c13 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c128";
-		reg = <0x53>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-	};
-};
-
-&i2c14 {
-	multi-master;
-	status = "okay";
-
-	ibm-panel@62 {
-		compatible = "ibm,op-panel";
-		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
-	};
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		idle-state = <1>;
-
-		i2c14mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c14mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@51 {
-				compatible = "atmel,24c32";
-				reg = <0x51>;
-			};
-		};
-
-		i2c14mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-
-			pca_oppanel: pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "front-sys-id0";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "front-check-log0";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@2 {
-					label = "front-enc-fault1";
-					reg = <2>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@3 {
-					label = "front-sys-pwron0";
-					reg = <3>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c14mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			max31785@52 {
-				compatible = "maxim,max31785a";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x52>;
-
-				fan@0 {
-					compatible = "pmbus-fan";
-					reg = <0>;
-					tach-pulses = <2>;
-				};
-
-				fan@1 {
-					compatible = "pmbus-fan";
-					reg = <1>;
-					tach-pulses = <2>;
-				};
-
-				fan@2 {
-					compatible = "pmbus-fan";
-					reg = <2>;
-					tach-pulses = <2>;
-				};
-
-				fan@3 {
-					compatible = "pmbus-fan";
-					reg = <3>;
-					tach-pulses = <2>;
-				};
-			};
-
-			pca_fan_nvme: pca9552@60 {
-				compatible = "nxp,pca9552";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "nvme0";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "nvme1";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@2 {
-					label = "nvme2";
-					reg = <2>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@3 {
-					label = "nvme3";
-					reg = <3>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@4 {
-					label = "nvme4";
-					reg = <4>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@5 {
-					label = "nvme5";
-					reg = <5>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@6 {
-					label = "nvme6";
-					reg = <6>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@7 {
-					label = "nvme7";
-					reg = <7>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@8 {
-					label = "nvme8";
-					reg = <8>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@9 {
-					label = "nvme9";
-					reg = <9>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@10 {
-					label = "fan0";
-					reg = <10>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@11 {
-					label = "fan1";
-					reg = <11>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@12 {
-					label = "fan2";
-					reg = <12>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@13 {
-					label = "fan3";
-					reg = <13>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-
-			pca0: pca9552@61 {
-				compatible = "nxp,pca9552";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x61>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				gpio-line-names =
-					"","","","",
-					"","","","",
-					"","","","",
-					"presence-fan3",
-					"presence-fan2",
-					"presence-fan1",
-					"presence-fan0";
-			};
-		};
-	};
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9546";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c14mux1chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-		};
-
-		i2c14mux1chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-		};
-
-		i2c14mux1chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-		};
-
-		i2c14mux1chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-		};
-	};
-};
-
-&i2c15 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c15mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-	};
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9546";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c15mux1chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux1chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux1chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux1chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-	};
-
-	i2c-switch@72 {
-		compatible = "nxp,pca9546";
-		reg = <0x72>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c15mux2chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux2chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux2chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c15mux2chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&emmc_controller {
-	status = "okay";
-};
-
-&pinctrl_emmc_default {
-	bias-disable;
-};
-
-&emmc {
-	status = "okay";
-	clk-phase-mmc-hs200 = <210>, <228>;
-};
-
-&fsim0 {
-	status = "okay";
-
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	/*
-	 * CFAM Reset is supposed to be active low but pass1 hardware is wired
-	 * active high.
-	 */
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
-
-	cfam@0,0 {	/* DCM0_C0 */
-		reg = <0 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <0>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OMI01 */
-			};
-
-			cfam0_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OMI23 */
-			};
-
-			cfam0_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam0_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam0_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam0_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam0_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam0_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ0: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub0: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&fsi_hub0 {
-	cfam@1,0 { /* DCM0_C1 */
-		reg = <1 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <1>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OMI45 */
-			};
-
-			cfam1_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OMI67 */
-			};
-
-			cfam1_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam1_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam1_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam1_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam1_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam1_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ1: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub1: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@2,0 { /* DCM1_C0 */
-		reg = <2 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <2>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam2_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OM01 */
-			};
-
-			cfam2_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OM23 */
-			};
-
-			cfam2_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam2_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam2_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam2_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam2_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam2_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam2_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ2: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub2: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@3,0 { /* DCM1_C1 */
-		reg = <3 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <3>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam3_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OM45 */
-			};
-
-			cfam3_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OM67 */
-			};
-
-			cfam3_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam3_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam3_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam3_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam3_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam3_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam3_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ3: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub3: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@4,0 { /* DCM2_C0 */
-		reg = <4 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <4>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam4_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OM01 */
-			};
-
-			cfam4_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OM23 */
-			};
-
-			cfam4_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam4_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam4_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam4_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam4_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam4_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam4_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam4_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam4_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam4_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ4: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub4: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@5,0 { /* DCM2_C1 */
-		reg = <5 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <5>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam5_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OM45 */
-			};
-
-			cfam5_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OM67 */
-			};
-
-			cfam5_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam5_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam5_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam5_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam5_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam5_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam5_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam5_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam5_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam5_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ5: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub5: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@6,0 { /* DCM3_C0 */
-		reg = <6 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <6>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam6_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OM01 */
-			};
-
-			cfam6_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OM23 */
-			};
-
-			cfam6_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam6_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam6_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam6_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam6_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam6_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam6_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam6_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam6_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam6_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ6: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub6: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@7,0 { /* DCM3_C1 */
-		reg = <7 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <7>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam7_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OM45 */
-			};
-
-			cfam7_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OM67 */
-			};
-
-			cfam7_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam7_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam7_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam7_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam7_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam7_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam7_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam7_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam7_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam7_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ7: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub7: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-};
-
-/* Legacy OCC numbering (to get rid of when userspace is fixed) */
-&fsi_occ0 {
-	reg = <1>;
-};
-
-&fsi_occ1 {
-	reg = <2>;
-};
-
-&fsi_occ2 {
-	reg = <3>;
-};
-
-&fsi_occ3 {
-	reg = <4>;
-};
-
-&fsi_occ4 {
-	reg = <5>;
-};
-
-&fsi_occ5 {
-	reg = <6>;
-};
-
-&fsi_occ6 {
-	reg = <7>;
-};
-
-&fsi_occ7 {
-	reg = <8>;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&vuart1 {
-	status = "okay";
-};
-
-&vuart2 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-};
-
-&mac2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii3_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
-		 <&syscon ASPEED_CLK_MAC3RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii4_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
-		 <&syscon ASPEED_CLK_MAC4RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	status = "okay";
-};
-
-&xdma {
-	status = "okay";
-	memory-region = <&vga_memory>;
-};
-
-&kcs2 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca8 0xcac>;
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts
deleted file mode 100644
index f5f5b18c113a8..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2021 IBM Corp.
-/dts-v1/;
-
-#include "aspeed-bmc-ibm-rainier-4u.dts"
-
-/ {
-	model = "Rainier 1S4U";
-};
-
-&max {
-	/delete-node/ fan3;
-	/delete-node/ fan5;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts
deleted file mode 100644
index 342546a3c0f5a..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2020 IBM Corp.
-/dts-v1/;
-
-#include "aspeed-bmc-ibm-rainier.dts"
-
-/ {
-	model = "Rainier 4U";
-};
-
-&i2c3 {
-	power-supply@6a {
-		compatible = "ibm,cffps";
-		reg = <0x6a>;
-	};
-
-	power-supply@6b {
-		compatible = "ibm,cffps";
-		reg = <0x6b>;
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
deleted file mode 100644
index 7162e65b81156..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ /dev/null
@@ -1,2420 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2019 IBM Corp.
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Rainier 2U";
-	compatible = "ibm,rainier-bmc", "aspeed,ast2600";
-
-	aliases {
-		i2c100 = &cfam0_i2c0;
-		i2c101 = &cfam0_i2c1;
-		i2c110 = &cfam0_i2c10;
-		i2c111 = &cfam0_i2c11;
-		i2c112 = &cfam0_i2c12;
-		i2c113 = &cfam0_i2c13;
-		i2c114 = &cfam0_i2c14;
-		i2c115 = &cfam0_i2c15;
-		i2c202 = &cfam1_i2c2;
-		i2c203 = &cfam1_i2c3;
-		i2c210 = &cfam1_i2c10;
-		i2c211 = &cfam1_i2c11;
-		i2c214 = &cfam1_i2c14;
-		i2c215 = &cfam1_i2c15;
-		i2c216 = &cfam1_i2c16;
-		i2c217 = &cfam1_i2c17;
-		i2c300 = &cfam2_i2c0;
-		i2c301 = &cfam2_i2c1;
-		i2c310 = &cfam2_i2c10;
-		i2c311 = &cfam2_i2c11;
-		i2c312 = &cfam2_i2c12;
-		i2c313 = &cfam2_i2c13;
-		i2c314 = &cfam2_i2c14;
-		i2c315 = &cfam2_i2c15;
-		i2c402 = &cfam3_i2c2;
-		i2c403 = &cfam3_i2c3;
-		i2c410 = &cfam3_i2c10;
-		i2c411 = &cfam3_i2c11;
-		i2c414 = &cfam3_i2c14;
-		i2c415 = &cfam3_i2c15;
-		i2c416 = &cfam3_i2c16;
-		i2c417 = &cfam3_i2c17;
-
-		serial4 = &uart5;
-		i2c16 = &i2c2mux0;
-		i2c17 = &i2c2mux1;
-		i2c18 = &i2c2mux2;
-		i2c19 = &i2c2mux3;
-		i2c20 = &i2c4mux0chn0;
-		i2c21 = &i2c4mux0chn1;
-		i2c22 = &i2c4mux0chn2;
-		i2c23 = &i2c5mux0chn0;
-		i2c24 = &i2c5mux0chn1;
-		i2c25 = &i2c6mux0chn0;
-		i2c26 = &i2c6mux0chn1;
-		i2c27 = &i2c6mux0chn2;
-		i2c28 = &i2c6mux0chn3;
-		i2c29 = &i2c11mux0chn0;
-		i2c30 = &i2c11mux0chn1;
-
-		spi10 = &cfam0_spi0;
-		spi11 = &cfam0_spi1;
-		spi12 = &cfam0_spi2;
-		spi13 = &cfam0_spi3;
-		spi20 = &cfam1_spi0;
-		spi21 = &cfam1_spi1;
-		spi22 = &cfam1_spi2;
-		spi23 = &cfam1_spi3;
-		spi30 = &cfam2_spi0;
-		spi31 = &cfam2_spi1;
-		spi32 = &cfam2_spi2;
-		spi33 = &cfam2_spi3;
-		spi40 = &cfam3_spi0;
-		spi41 = &cfam3_spi1;
-		spi42 = &cfam3_spi2;
-		spi43 = &cfam3_spi3;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200n8 earlycon";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		ramoops@b3e00000 {
-			compatible = "ramoops";
-			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
-			record-size = <0x8000>;
-			console-size = <0x8000>;
-			ftrace-size = <0x8000>;
-			pmsg-size = <0x8000>;
-			max-reason = <3>; /* KMSG_DUMP_EMERG */
-		};
-
-		/* LPC FW cycle bridge region requires natural alignment */
-		flash_memory: region@b4000000 {
-			no-map;
-			reg = <0xb4000000 0x04000000>; /* 64M */
-		};
-
-		/* VGA region is dictated by hardware strapping */
-		vga_memory: region@bf000000 {
-			no-map;
-			compatible = "shared-dma-pool";
-			reg = <0xbf000000 0x01000000>;  /* 16M */
-		};
-	};
-
-	i2c2mux: i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		i2c-parent = <&i2c2>;
-		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
-			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
-		idle-state = <0>;
-
-		i2c2mux0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c2mux1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c2mux2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c2mux3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* BMC Card fault LED at the back */
-		bmc-ingraham0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		/* Enclosure ID LED at the back */
-		rear-enc-id0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		/* Enclosure fault LED at the back */
-		rear-enc-fault0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
-		};
-
-		/* PCIE slot power LED */
-		pcieslot-power {
-			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
-			linux,code = <8>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-
-		event-fan4-presence {
-			label = "fan4-presence";
-			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
-			linux,code = <10>;
-		};
-
-		event-fan5-presence {
-			label = "fan5-presence";
-			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
-			linux,code = <11>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc1 7>;
-	};
-};
-
-&adc1 {
-	status = "okay";
-	aspeed,int-vref-microvolt = <2500000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
-		&pinctrl_adc10_default &pinctrl_adc11_default
-		&pinctrl_adc12_default &pinctrl_adc13_default
-		&pinctrl_adc14_default &pinctrl_adc15_default>;
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&gpio0 {
-	gpio-line-names =
-	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"","","","","","","checkstop","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
-	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","usb-power","","","","",
-	/*P0-P7*/	"","","","","pcieslot-power","","","",
-	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
-	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
-	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
-	"power-ffs-sync-history","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","";
-
-	i2c3_mux_oe_n {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "I2C3_MUX_OE_N";
-	};
-
-	usb_power {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
-		output-high;
-	};
-};
-
-&emmc_controller {
-	status = "okay";
-};
-
-&pinctrl_emmc_default {
-	bias-disable;
-};
-
-&emmc {
-	status = "okay";
-	clk-phase-mmc-hs200 = <180>, <180>;
-};
-
-&fsim0 {
-	status = "okay";
-
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	/*
-	 * CFAM Reset is supposed to be active low but pass1 hardware is wired
-	 * active high.
-	 */
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
-
-	cfam@0,0 {
-		reg = <0 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <0>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OMI01 */
-			};
-
-			cfam0_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OMI23 */
-			};
-
-			cfam0_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam0_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam0_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam0_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam0_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam0_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-                };
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ0: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub0: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&fsi_hub0 {
-	cfam@1,0 {
-		reg = <1 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <1>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OMI45 */
-			};
-
-			cfam1_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OMI67 */
-			};
-
-			cfam1_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam1_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam1_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam1_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam1_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam1_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-                };
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ1: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub1: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@2,0 {
-		reg = <2 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <2>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam2_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OM01 */
-			};
-
-			cfam2_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OM23 */
-			};
-
-			cfam2_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam2_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam2_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam2_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam2_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam2_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam2_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ2: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub2: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@3,0 {
-		reg = <3 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <3>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam3_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OM45 */
-			};
-
-			cfam3_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OM67 */
-			};
-
-			cfam3_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam3_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam3_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam3_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam3_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam3_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam3_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ3: occ {
-				compatible = "ibm,p10-occ";
-
-				occ-hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub3: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-};
-
-/* Legacy OCC numbering (to get rid of when userspace is fixed) */
-&fsi_occ0 {
-	reg = <1>;
-};
-
-&fsi_occ1 {
-	reg = <2>;
-};
-
-&fsi_occ2 {
-	reg = <3>;
-};
-
-&fsi_occ3 {
-	reg = <4>;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	tca_pres1: tca9554@20{
-		compatible = "ti,tca9554";
-		reg = <0x20>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "",
-			"RUSSEL_FW_I2C_ENABLE_N",
-			"RUSSEL_OPPANEL_PRESENCE_N",
-			"BLYTH_OPPANEL_PRESENCE_N",
-			"CPU_TPM_CARD_PRESENT_N",
-			"DASD_BP2_PRESENT_N",
-			"DASD_BP1_PRESENT_N",
-			"DASD_BP0_PRESENT_N";
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	power-supply@68 {
-		compatible = "ibm,cffps";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps";
-		reg = <0x69>;
-	};
-
-	pca_pres1: pca9552@61 {
-		compatible = "nxp,pca9552";
-		reg = <0x61>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
-			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
-			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
-			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
-			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
-			"", "", "", "", "", "";
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-
-	pca9546@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c4mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-
-			pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard0-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard0-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c4mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-		};
-
-		i2c4mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-		};
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	pca9546@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c5mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-
-			pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard3-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard3-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c5mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-
-			pca9551@61 {
-				compatible = "nxp,pca9551";
-				reg = <0x61>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard4-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard4-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-
-	tmp275@4b {
-		compatible = "ti,tmp275";
-		reg = <0x4b>;
-	};
-
-	pca9546@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c6mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c6mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-		};
-
-		i2c6mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c6mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-		};
-	};
-};
-
-&i2c7 {
-	multi-master;
-	status = "okay";
-
-	pca9552@30 {
-		compatible = "ibm,pca9552";
-		reg = <0x30>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "pcieslot0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "pcieslot1";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "pcieslot2";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "pcieslot3";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "pcieslot4";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "cpu1";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "cpu-vrm1";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "lcd-russel";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca9552@31 {
-		compatible = "ibm,pca9552";
-		reg = <0x31>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm1";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm2";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm3";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm4";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm5";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm6";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm7";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm8";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm9";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm10";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm11";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm12";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm13";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm14";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm15";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca9552@32 {
-		compatible = "ibm,pca9552";
-		reg = <0x32>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm16";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm17";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm18";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm19";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm20";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm21";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm22";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm23";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm24";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm25";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm26";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm27";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm28";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm29";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm30";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm31";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca9552@33 {
-		compatible = "ibm,pca9552";
-		reg = <0x33>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "planar";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cpu0";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "dasd-pyramid0";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "dasd-pyramid1";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "dasd-pyramid2";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "cpu0-vrm0";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "rtc-battery";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "base-blyth";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "pcieslot6";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "pcieslot7";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "pcieslot8";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "pcieslot9";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "pcieslot10";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "pcieslot11";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "tpm-wilson";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	si7021-a20@40 {
-		compatible = "silabs,si7020";
-		reg = <0x40>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	max: max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan0: fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-		};
-
-		fan1: fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-		};
-
-		fan2: fan@2 {
-			compatible = "pmbus-fan";
-			reg = <2>;
-			tach-pulses = <2>;
-		};
-
-		fan3: fan@3 {
-			compatible = "pmbus-fan";
-			reg = <3>;
-			tach-pulses = <2>;
-		};
-
-		fan4: fan@4 {
-			compatible = "pmbus-fan";
-			reg = <4>;
-			tach-pulses = <2>;
-		};
-
-		fan5: fan@5 {
-			compatible = "pmbus-fan";
-			reg = <5>;
-			tach-pulses = <2>;
-		};
-	};
-
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "front-sys-id0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "front-check-log0";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "front-enc-fault1";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "front-sys-pwron0";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca0: pca9552@61 {
-		compatible = "nxp,pca9552";
-		reg = <0x61>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "fan0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "fan1";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "fan2";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "fan3";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "fan4";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "fan5";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	ibm-panel@62 {
-		compatible = "ibm,op-panel";
-		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
-	};
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	ucd90320@11 {
-		compatible = "ti,ucd90320";
-		reg = <0x11>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	pca_pres3: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"", "", "", "", "", "", "", "",
-			"", "", "", "", "", "", "power-config-full-load", "";
-	};
-
-	pca_pres2: pca9552@61 {
-		compatible = "nxp,pca9552";
-		reg = <0x61>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
-			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
-			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
-			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
-			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
-			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
-			"", "", "", "";
-	};
-
-};
-
-&i2c9 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	tmp423b@4d {
-		compatible = "ti,tmp423";
-		reg = <0x4d>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	tmp423b@4d {
-		compatible = "ti,tmp423";
-		reg = <0x4d>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	pca9546@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c11mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-
-			pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard10-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard10-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c11mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-		};
-	};
-};
-
-&i2c12 {
-	status = "okay";
-
-	tpm@2e {
-		compatible = "nuvoton,npct75x";
-		reg = <0x2e>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c13 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "nvme0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "nvme1";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "nvme2";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "nvme3";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "nvme4";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "nvme5";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "nvme6";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "nvme7";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-};
-
-&i2c14 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "nvme8";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "nvme9";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "nvme10";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "nvme11";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "nvme12";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "nvme13";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "nvme14";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "nvme15";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-};
-
-&i2c15 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "nvme16";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "nvme17";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "nvme18";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "nvme19";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "nvme20";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "nvme21";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "nvme22";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "nvme23";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&vuart1 {
-	status = "okay";
-};
-
-&vuart2 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-};
-
-&mac2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii3_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
-		 <&syscon ASPEED_CLK_MAC3RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii4_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
-		 <&syscon ASPEED_CLK_MAC4RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	status = "okay";
-};
-
-&xdma {
-	status = "okay";
-	memory-region = <&vga_memory>;
-};
-
-&kcs2 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca8 0xcac>;
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
deleted file mode 100644
index 208b0f094ed95..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ /dev/null
@@ -1,912 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "FP5280G2 BMC";
-	compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@9f000000 {
-			no-map;
-			reg = <0x9f000000 0x01000000>; /* 16M */
-		};
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		coldfire_memory: codefire_memory@9ef00000 {
-			reg = <0x9ef00000 0x00100000>;
-			no-map;
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;	/* 32M */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		memory-region = <&coldfire_memory>;
-		aspeed,sram = <&sram>;
-		aspeed,cvic = <&cvic>;
-
-		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(B, 3)>;
-		};
-
-		event-ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 0)>;
-		};
-
-		event-ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 1)>;
-		};
-
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
-			linux,code = <1>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
-			linux,code = <2>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
-			linux,code = <3>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
-			linux,code = <4>;
-		};
-
-		event-fan4-presence {
-			label = "fan4-presence";
-			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <5>;
-		};
-
-		event-fan5-presence {
-			label = "fan5-presence";
-			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		event-fan6-presence {
-			label = "fan6-presence";
-			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		event-fan7-presence {
-			label = "fan7-presence";
-			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
-			linux,code = <8>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "power";
-			/* TODO: dummy gpio */
-			gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		init-ok {
-			label = "init-ok";
-			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
-		};
-
-		front-memory {
-			label = "front-memory";
-			gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
-		};
-
-		front-syshot {
-			label = "front-syshot";
-			gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		front-syshealth {
-			label = "front-syshealth";
-			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		front-fan {
-			label = "front-fan";
-			gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
-		};
-
-		front-psu {
-			label = "front-psu";
-			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		identify {
-			label = "identify";
-			gpios = <&gpio ASPEED_GPIO(Z, 7) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
-			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
-			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>;
-	};
-
-};
-
-&gpio {
-	gpio-line-names =
-	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"","","front-psu","checkstop","cfam-reset","","","init-ok",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"ps0-presence","ps1-presence","","","front-memory","","","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","","front-fan","","","",
-	/*I0-I7*/	"front-syshealth","front-syshot","mux-gpios","enable-gpios","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","power","trans-gpios","","","","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","identify",
-	/*AA0-AA7*/	"clock-gpios","","data-gpios","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-64.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* Test Point */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart3 {
-	/* APSS */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	/* LCD */
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-		label = "fru";
-	};
-
-};
-
-&i2c2 {
-	status = "okay";
-
-	tmp112@48 {
-		compatible = "ti,tmp112";
-		reg = <0x48>;
-		label = "inlet";
-	};
-
-	tmp112@49 {
-		compatible = "ti,tmp112";
-		reg = <0x49>;
-		label = "outlet";
-	};
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tmp112@4a {
-				compatible = "ti,tmp112";
-				reg = <0x4a>;
-				label = "psu_inlet";
-			};
-
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tmp112@4a {
-				compatible = "ti,tmp112";
-				reg = <0x4a>;
-				label = "ocp_zone";
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			tmp112@4a {
-				compatible = "ti,tmp112";
-				reg = <0x4a>;
-				label = "bmc_zone";
-			};
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			tmp112@7c {
-				compatible = "microchip,emc1413";
-				reg = <0x7c>;
-			};
-		};
-
-	};
-};
-
-&i2c3 {
-	/* Riser Card */
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-
-	rtc@68 {
-		compatible = "dallas,ds3232";
-		reg = <0x68>;
-	};
-};
-
-&i2c5 {
-	/* vr  */
-	status = "okay";
-};
-
-&i2c6 {
-	/* bp card */
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adm1278@10 {
-				compatible = "adi,adm1278";
-				reg = <0x10>;
-			};
-
-			adm1278@13 {
-				compatible = "adi,adm1278";
-				reg = <0x13>;
-			};
-
-			adm1278@50 {
-				compatible = "adi,adm1278";
-				reg = <0x50>;
-			};
-
-			adm1278@53 {
-				compatible = "adi,adm1278";
-				reg = <0x53>;
-			};
-
-		};
-
-		/*pcie riser*/
-
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	pca0: pca9555@20 {
-		compatible = "nxp,pca9555";
-		reg = <0x20>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-	};
-
-	pca1: pca9555@21 {
-		compatible = "nxp,pca9555";
-		reg = <0x21>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	pca2: pca9555@22 {
-		compatible = "nxp,pca9555";
-		reg = <0x22>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	pca3: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	pca4: pca9555@24 {
-		compatible = "nxp,pca9555";
-		reg = <0x24>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	pca5: pca9555@25 {
-		compatible = "nxp,pca9555";
-		reg = <0x25>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-};
-
-&i2c9 {
-	/* cpld */
-	status = "okay";
-};
-
-&i2c10 {
-	/* hdd bp */
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	power-supply@58 {
-		compatible = "inspur,ipsps1";
-		reg = <0x58>;
-	};
-
-	power-supply@59 {
-		compatible = "inspur,ipsps1";
-		reg = <0x59>;
-	};
-};
-
-&i2c12 {
-	/* odcc */
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&ibt {
-	status = "okay";
-
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
-	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
-	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
-	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
-	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
-	 &pinctrl_adc14_default &pinctrl_adc15_default>;
-};
-
-&vhub {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-		&pinctrl_pwm2_default &pinctrl_pwm3_default
-		&pinctrl_pwm4_default &pinctrl_pwm5_default
-		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
-	};
-
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
-	};
-
-	fan@6 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
-	};
-
-	fan@7 {
-		reg = <0x07>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
-	};
-
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-};
-
-#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
deleted file mode 100644
index b3c1e3ba58318..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
+++ /dev/null
@@ -1,691 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2021 Inspur Corporation
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "NF5280M6 BMC";
-	compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@9f000000 {
-			no-map;
-			reg = <0x9f000000 0x01000000>; /* 16M */
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;	/* 32M */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	leds {
-	    compatible = "gpio-leds";
-
-		bmc_alive {
-			label = "bmc_alive";
-			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-			led-pattern = <1000 1000>;
-		};
-
-		front-fan {
-			label = "front-fan";
-			gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
-		};
-
-	    front-psu {
-			label = "front-psu";
-			gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
-		};
-
-	    front-syshot {
-			label = "front-syshot";
-			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
-		};
-
-		front-memory {
-			label = "front-memory";
-			gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
-		};
-
-		identify {
-			label = "identify";
-			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
-			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
-			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bios";
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		<&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&gpio {
-	status = "okay";
-	/* Enable GPIOE0 and GPIOE2 pass-through by default */
-	pinctrl-names = "pass-through";
-	pinctrl-0 = <&pinctrl_gpie0_default
-			&pinctrl_gpie2_default>;
-	gpio-line-names =
-	/*A0-A7*/	"","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
-	/*B0-B7*/	"BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
-				"FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
-				"FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
-				"BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
-	/*E0-E7*/	"FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
-				"FM_BOARD_ID4","FM_BOARD_ID5","","",
-	/*F0-F7*/	"PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
-				"BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
-				"RST_GLB_RST_WARN_N",
-	/*G0-G7*/	"IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
-				"BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
-	/*H0-H7*/	"JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
-				"FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
-	/*I0-I7*/	"FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
-				"FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
-	/*J0-J7*/	"FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
-				"VGA_HSYNC","VGA_VSYNC","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
-	/*R0-R7*/	"SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
-				"DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
-				"RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
-	/*S0-S7*/	"BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
-				"GPIOS5_BMC","","GPIOS7_BMC",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
-	/*Z0-Z7*/	"XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
-				"GPIOZ5","","",
-	/*AA0-AA7*/	"FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
-				"FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
-	/*AB0-AB7*/	"RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-&i2c0 {
-	/* FP_LCD */
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-		label = "fru";
-	};
-};
-
-&i2c2 {
-	status = "okay";
-
-	tmp112@48 {
-		compatible = "ti,tmp112";
-		reg = <0x48>;
-		label = "inlet";
-	};
-
-	tmp112@49 {
-		compatible = "ti,tmp112";
-		reg = <0x49>;
-		label = "outlet";
-	};
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-	};
-
-	pca9548@71 {
-		compatible = "nxp,pca9548";
-		reg = <0x71>;
-	};
-
-	pca9548@72 {
-		compatible = "nxp,pca9548";
-		reg = <0x72>;
-	};
-};
-
-&i2c4 {
-	/* IPMB */
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	adm1278@33 {
-		compatible = "adi,adm1293";
-		reg = <0x33>;
-	};
-
-	adm1278@32 {
-		compatible = "adi,adm1293";
-		reg = <0x32>;
-	};
-
-	adm1278@20 {
-		compatible = "adi,adm1293";
-		reg = <0x20>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	pca0: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	pca1: pca9555@22 {
-		compatible = "nxp,pca9555";
-		reg = <0x22>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	pca2: pca9555@20 {
-		compatible = "nxp,pca9555";
-		reg = <0x20>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	pca3: pca9555@21 {
-		compatible = "nxp,pca9555";
-		reg = <0x21>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-};
-
-&i2c9 {
-	/* cpld */
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-
-	pca4: pca9555@24 {
-		compatible = "nxp,pca9555";
-		reg = <0x24>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	pca5: pca9555@25 {
-		compatible = "nxp,pca9555";
-		reg = <0x25>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	power-supply@58 {
-		compatible = "inspur,ipsps1";
-		reg = <0x58>;
-	};
-
-	power-supply@59 {
-		compatible = "inspur,ipsps1";
-		reg = <0x59>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-		&pinctrl_pwm2_default &pinctrl_pwm3_default
-		&pinctrl_pwm4_default &pinctrl_pwm5_default
-		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
-	};
-
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
-	};
-
-	fan@6 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
-	};
-
-	fan@7 {
-		reg = <0x07>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
-	};
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-};
-
-&kcs4 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca4>;
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
-	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
-	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
-	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
-	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
-	 &pinctrl_adc14_default &pinctrl_adc15_default>;
-};
-
-&vhub {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&vuart {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
deleted file mode 100644
index 5a98a19f445e0..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018 Inspur Corporation
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "ON5263M5 BMC";
-	compatible = "inspur,on5263m5-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "earlycon";
-	};
-
-	memory {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@9f000000 {
-			no-map;
-			reg = <0x9f000000 0x01000000>;
-		};
-	};
-
-	leds {
-	    compatible = "gpio-leds";
-	    bmc_alive {
-		label = "bmc_alive";
-		gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
-		linux,default-trigger = "timer";
-	    };
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
-	};
-
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-	};
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c6 {
-	status = "okay";
-
-	tmp421@4e {
-		compatible = "ti,tmp421";
-		reg = <0x4e>;
-	};
-
-	tmp112@48 {
-		compatible = "ti,tmp112";
-		reg = <0x48>;
-	};
-
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-		pagesize = <32>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	adm1278@11 {
-		  compatible = "adi,adm1278";
-		  reg = <0x11>;
-	};
-};
-
-&gfx {
-	status = "okay";
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
-	};
-};
-
-&adc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
deleted file mode 100644
index d5b7d28cda887..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2017 Intel Corporation
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-
-/ {
-	model = "S2600WF BMC";
-	compatible = "intel,s2600wf-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@9f000000 {
-			no-map;
-			reg = <0x9f000000 0x01000000>; /* 16M */
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
-			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
-			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
-	};
-
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-	};
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-			 &pinctrl_pwm2_default &pinctrl_pwm3_default
-			 &pinctrl_pwm4_default &pinctrl_pwm5_default
-			 &pinctrl_pwm6_default &pinctrl_pwm7_default>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts
deleted file mode 100644
index caf66651e5b5d..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts
+++ /dev/null
@@ -1,328 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2021 Inventec Corp.
-
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include "aspeed-g6-pinctrl.dtsi"
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-       model = "TRANSFORMERS BMC";
-       compatible = "inventec,transformer-bmc", "aspeed,ast2600";
-
-       aliases {
-               serial4 = &uart5;
-       };
-
-       chosen {
-               stdout-path = &uart5;
-               bootargs = "console=ttyS4,115200n8";
-       };
-
-       memory@80000000 {
-               device_type = "memory";
-               reg = <0x80000000 0x80000000>;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               // UID led
-               uid {
-                       label = "UID_LED";
-                       gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
-               };
-
-               // Heart beat led
-               heartbeat {
-                       label = "HB_LED";
-                       gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&mdio0 {
-       status = "okay";
-
-       ethphy0: ethernet-phy@0 {
-               compatible = "ethernet-phy-ieee802.3-c22";
-               reg = <1>;
-       };
-};
-
-&mac3 {
-       status = "okay";
-       phy-mode = "rgmii";
-       phy-handle = <&ethphy0>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_rgmii4_default>;
-};
-
-&fmc {
-       status = "okay";
-
-       flash@0 {
-               status = "okay";
-               m25p,fast-read;
-               label = "bmc";
-               spi-max-frequency = <33000000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-#include "openbmc-flash-layout.dtsi"
-       };
-
-       flash@1 {
-               status = "okay";
-               m25p,fast-read;
-               label = "bmc2";
-               spi-max-frequency = <33000000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-       };
-};
-
-&spi1 {
-       status = "okay";
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_spi1_default>;
-
-       flash@0 {
-               status = "okay";
-               m25p,fast-read;
-               label = "bios";
-               spi-max-frequency = <33000000>;
-               spi-tx-bus-width = <1>;
-               spi-rx-bus-width = <1>;
-       };
-};
-
-&wdt1 {
-       status = "okay";
-};
-
-&uart1 {
-       status = "okay";
-};
-
-&uart5 {
-       status = "okay";
-};
-
-&i2c0 {
-       status = "okay";
-
-       //Set bmc' slave address;
-       bmc_slave@10 {
-               compatible = "ipmb-dev";
-               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-               i2c-protocol;
-       };
-};
-
-&i2c2 {
-       status = "okay";
-};
-
-&i2c3 {
-       // FRU AT24C512C-SSHM-T
-       status = "okay";
-       eeprom@50 {
-               compatible = "atmel,24c512";
-               reg = <0x50>;
-               pagesize = <128>;
-       };
-};
-
-&i2c5 {
-       status = "okay";
-};
-
-&i2c6 {
-       status = "okay";
-
-       tmp75@49 {
-               compatible = "ti,tmp75";
-               reg = <0x49>;
-       };
-
-       tmp75@4f {
-               compatible = "ti,tmp75";
-               reg = <0x4f>;
-       };
-
-       tmp468@48 {
-               compatible = "ti,tmp468";
-               reg = <0x48>;
-       };
-};
-
-&i2c7 {
-       status = "okay";
-       adm1278@40 {
-               compatible = "adi,adm1278";
-               reg = <0x40>;
-       };
-};
-
-
-&i2c8 {
-       // FRU AT24C512C-SSHM-T
-       status = "okay";
-
-       eeprom@51 {
-               compatible = "atmel,24c512";
-               reg = <0x51>;
-               pagesize = <128>;
-       };
-
-       eeprom@53 {
-               compatible = "atmel,24c512";
-               reg = <0x53>;
-               pagesize = <128>;
-       };
-};
-
-&i2c9 {
-       // M.2
-       status = "okay";
-};
-
-&i2c10 {
-       // I2C EXPANDER
-       status = "okay";
-
-       i2c-switch@71 {
-               compatible = "nxp,pca9544";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x71>;
-       };
-
-       i2c-switch@73 {
-               compatible = "nxp,pca9544";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x73>;
-       };
-};
-
-&i2c11 {
-       // I2C EXPANDER
-       status = "okay";
-
-       i2c-switch@70 {
-               compatible = "nxp,pca9544";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x70>;
-
-               pcie_eeprom_riser1: i2c@0 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       reg = <0>;
-
-                       eeprom@55 {
-                               compatible = "atmel,24c512";
-                               reg = <0x55>;
-                               pagesize = <128>;
-                       };
-               };
-
-               pcie_eeprom_riser2: i2c@1 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       reg = <1>;
-
-                       eeprom@55 {
-                               compatible = "atmel,24c512";
-                               reg = <0x55>;
-                               pagesize = <128>;
-                       };
-               };
-
-               pcie_eeprom_riser3: i2c@2 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       reg = <2>;
-
-                       eeprom@55 {
-                               compatible = "atmel,24c512";
-                               reg = <0x55>;
-                               pagesize = <128>;
-                       };
-               };
-       };
-};
-
-&i2c12 {
-       status = "okay";
-
-       psu0:psu0@58 {
-               compatible = "pmbus";
-               reg = <0x58>;
-       };
-};
-
-&gpio0 {
-       status = "okay";
-       gpio-line-names =
-       /*A0-A7*/   "","","","","","","","",
-       /*B0-B7*/   "presence-ps0","power-chassis-good","","","","","presence-ps1","",
-       /*C0-C7*/   "","","","","","","","",
-       /*D0-D7*/   "","","","","","","","",
-       /*E0-E7*/   "","","","","","","","",
-       /*F0-F7*/   "","","","","power-chassis-control","","","",
-       /*G0-G7*/   "","","jtag-mux","","","","","",
-       /*H0-H7*/   "","","","","reset-button","power-button","","",
-       /*I0-I7*/   "","","","","","","","",
-       /*J0-J7*/   "","","","","","","","",
-       /*K0-K7*/   "","","","","","","","",
-       /*L0-L7*/   "","","","","","","","",
-       /*M0-M7*/   "","","","","","","","",
-       /*N0-N7*/   "","","","","","","","",
-       /*O0-O7*/   "","","","","","","","",
-       /*P0-P7*/   "","","","tck-mux","","","","",
-       /*Q0-Q7*/   "","","","","","","","",
-       /*R0-R7*/   "","","","","","","","",
-       /*S0-S7*/   "","","","","","","","",
-       /*T0-T7*/   "","","","","","","","",
-       /*U0-U7*/   "","nmi-button","","","","","","",
-       /*V0-V7*/   "","","","","power-config-full-load","","","",
-       /*W0-W7*/   "","","","","","","","",
-       /*X0-X7*/   "","","","","","","","",
-       /*Y0-Y7*/   "","","","","","","","",
-       /*Z0-Z7*/   "","","","","","","","",
-       /*AA0-AA7*/ "","","","","","","","",
-       /*AB0-AB7*/ "","","","","","","","",
-       /*AC0-AC7*/ "","","","","","","","";
-};
-
-&lpc_snoop {
-       status = "okay";
-       snoop-ports = <0x80>;
-};
-
-&emmc_controller {
-       status = "okay";
-};
-
-&emmc {
-       status = "okay";
-       non-removable;
-       max-frequency = <52000000>;
-       bus-width = <8>;
-};
-
-&vhub {
-       status = "okay";
-       aspeed,vhub-downstream-ports = <7>;
-       aspeed,vhub-generic-endpoints = <21>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usb2ad_default>;
-};
-
-&rtc {
-       status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
deleted file mode 100644
index 8f543cca7c21f..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
+++ /dev/null
@@ -1,569 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for Lenovo Hr630 platform
- *
- * Copyright (C) 2019-present Lenovo
- */
-
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "HR630 BMC";
-	compatible = "lenovo,hr630-bmc", "aspeed,ast2500";
-
-	aliases {
-		i2c14 = &i2c_rbp;
-		i2c15 = &i2c_fbp1;
-		i2c16 = &i2c_fbp2;
-		i2c17 = &i2c_fbp3;
-		i2c18 = &i2c_riser2;
-		i2c19 = &i2c_pcie4;
-		i2c20 = &i2c_riser1;
-		i2c21 = &i2c_ocp;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x00100000>; /* 1M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		fault {
-			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
-		<&adc 8>, <&adc 9>, <&adc 10>,
-		<&adc 12>, <&adc 13>, <&adc 14>;
-	};
-
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default>;
-};
-
-&uart2 {
-	/* Rear RS-232 connector */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-			&pinctrl_rxd2_default
-			&pinctrl_nrts2_default
-			&pinctrl_ndtr2_default
-			&pinctrl_ndsr2_default
-			&pinctrl_ncts2_default
-			&pinctrl_ndcd2_default
-			&pinctrl_nri2_default>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default
-			&pinctrl_rxd3_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&ibt {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&adc {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-			&pinctrl_adc1_default
-			&pinctrl_adc2_default
-			&pinctrl_adc3_default
-			&pinctrl_adc4_default
-			&pinctrl_adc5_default
-			&pinctrl_adc6_default
-			&pinctrl_adc7_default
-			&pinctrl_adc8_default
-			&pinctrl_adc9_default
-			&pinctrl_adc10_default
-			&pinctrl_adc12_default
-			&pinctrl_adc13_default
-			&pinctrl_adc14_default>;
-};
-
-&i2c0 {
-	status = "okay";
-	/* temp1 inlet */
-	tmp75@4e {
-		compatible = "national,lm75";
-		reg = <0x4e>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	/* temp2 outlet */
-	tmp75@4d {
-		compatible = "national,lm75";
-		reg = <0x4d>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-	/*	Slot 0,
-	 *	Slot 1,
-	 *	Slot 2,
-	 *	Slot 3
-	 */
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9545";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;	/* may use mux@70 next. */
-
-		i2c_rbp: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c_fbp1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c_fbp2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c_fbp3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	/*	Slot 0,
-	 *	Slot 1,
-	 *	Slot 2,
-	 *	Slot 3
-	 */
-	i2c-switch@76 {
-		compatible = "nxp,pca9546";
-		reg = <0x76>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;  /* may use mux@76 next. */
-
-		i2c_riser2: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c_pcie4: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c_riser1: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c_ocp: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	eeprom@57 {
-		compatible = "atmel,24c256";
-		reg = <0x57>;
-		pagesize = <16>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default
-	&pinctrl_pwm1_default
-	&pinctrl_pwm2_default
-	&pinctrl_pwm3_default
-	&pinctrl_pwm4_default
-	&pinctrl_pwm5_default
-	&pinctrl_pwm6_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@6 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-
-	fan@8 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@9 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-
-	fan@10 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
-	};
-
-	fan@11 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
-	};
-
-	fan@12 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
-	};
-
-	fan@13 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
-	};
-};
-
-&gpio {
-
-	pin_gpio_b5 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
-	};
-
-	pin_gpio_f0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "IRQ_BMC_PCH_NMI_R";
-	};
-
-	pin_gpio_f3 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "I2C_BUS0_RST_OUT_N";
-	};
-
-	pin_gpio_f4 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "FM_SKT0_FAULT_LED";
-	};
-
-	pin_gpio_f5 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "FM_SKT1_FAULT_LED";
-	};
-
-	pin_gpio_g4 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "FAN_PWR_CTL_N";
-	};
-
-	pin_gpio_g7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "RST_BMC_PCIE_I2CMUX_N";
-	};
-
-	pin_gpio_h2 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PSU1_FFS_N_R";
-	};
-
-	pin_gpio_h3 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PSU2_FFS_N_R";
-	};
-
-	pin_gpio_i3 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_INTRUDED_COVER";
-	};
-
-	pin_gpio_j2 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_BIOS_UPDATE_N";
-	};
-
-	pin_gpio_j3 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "RST_BMC_HDD_I2CMUX_N";
-	};
-
-	pin_gpio_s2 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_VGA_SW";
-	};
-
-	pin_gpio_s4 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
-		output;
-		line-name = "VBAT_EN_N";
-	};
-
-	pin_gpio_s6 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PU_BMC_GPIOS6";
-	};
-
-	pin_gpio_y0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "BMC_NCSI_MUX_CTL_S0";
-	};
-
-	pin_gpio_y1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "BMC_NCSI_MUX_CTL_S1";
-	};
-
-	pin_gpio_z0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "I2C_RISER2_INT_N";
-	};
-
-	pin_gpio_z2 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "I2C_RISER2_RESET_N";
-	};
-
-	pin_gpio_z3 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "FM_BMC_PCH_SCI_LPC_N";
-	};
-
-	pin_gpio_z7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "BMC_POST_CMPLT_N";
-	};
-
-	pin_gpio_aa0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "HOST_BMC_USB_SEL";
-	};
-
-	pin_gpio_aa5 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "I2C_BUS1_RST_OUT_N";
-	};
-
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
deleted file mode 100644
index bcc1820f5c073..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
+++ /dev/null
@@ -1,666 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for Lenovo Hr855xg2 platform
- *
- * Copyright (C) 2019-present Lenovo
- */
-
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "HR855XG2 BMC";
-	compatible = "lenovo,hr855xg2-bmc", "aspeed,ast2500";
-
-	aliases {
-		i2c14 = &i2c_riser1;
-		i2c15 = &i2c_riser2;
-		i2c16 = &i2c_riser3;
-		i2c17 = &i2c_M2;
-		i2c18 = &channel_0;
-		i2c19 = &channel_1;
-		i2c20 = &channel_2;
-		i2c21 = &channel_3;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x00100000>; /* 1M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
-		};
-
-		fault {
-			gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
-		<&adc 8>, <&adc 9>, <&adc 10>,<&adc 11>,
-		<&adc 12>,<&adc 13>,<&adc 14>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
-	};
-
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&lpc_snoop {
-	status = "okay";
-	snoop-ports = <0x80>;
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default>;
-};
-
-&uart2 {
-	/* Rear RS-232 connector */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-			&pinctrl_rxd2_default
-			&pinctrl_nrts2_default
-			&pinctrl_ndtr2_default
-			&pinctrl_ndsr2_default
-			&pinctrl_ncts2_default
-			&pinctrl_ndcd2_default
-			&pinctrl_nri2_default>;
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&ibt {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&adc{
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-			&pinctrl_adc1_default
-			&pinctrl_adc2_default
-			&pinctrl_adc3_default
-			&pinctrl_adc4_default
-			&pinctrl_adc5_default
-			&pinctrl_adc6_default
-			&pinctrl_adc7_default
-			&pinctrl_adc8_default
-			&pinctrl_adc9_default
-			&pinctrl_adc10_default
-			&pinctrl_adc11_default
-			&pinctrl_adc12_default
-			&pinctrl_adc13_default
-			&pinctrl_adc14_default
-			&pinctrl_adc15_default>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9545";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c_riser1: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c_riser2: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c_riser3: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c_M2: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	bus-frequency = <90000>;
-	HotSwap@10 {
-		compatible = "adm1272";
-		reg = <0x10>;
-	};
-
-	VR@45 {
-		compatible = "pmbus";
-		reg = <0x45>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel_0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		channel_1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		channel_2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		channel_3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-	/* temp1 */
-	tmp75@49 {
-		compatible = "national,lm75";
-		reg = <0x49>;
-	};
-
-	/* temp2 */
-	tmp75@4d {
-		compatible = "national,lm75";
-		reg = <0x4d>;
-	};
-
-	eeprom@54 {
-		compatible = "atmel,24c256";
-		reg = <0x54>;
-		pagesize = <16>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default
-	&pinctrl_pwm1_default
-	&pinctrl_pwm2_default
-	&pinctrl_pwm3_default
-	&pinctrl_pwm4_default
-	&pinctrl_pwm5_default
-	&pinctrl_pwm6_default
-	&pinctrl_pwm7_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@6 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-
-	fan@8 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@9 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-
-	fan@10 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
-	};
-
-	fan@11 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
-	};
-
-	fan@12 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
-	};
-
-	fan@13 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
-	};
-
-	fan@14 {
-		reg = <0x07>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
-	};
-
-	fan@15 {
-		reg = <0x07>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
-	};
-
-	fan@16 {
-		reg = <0x07>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
-	};
-};
-
-&gpio {
-
-	pin_gpio_a1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "BMC_EMMC_RST_N";
-	};
-
-	pin_gpio_a3 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "PCH_PWROK_BMC_FPGA";
-	};
-
-	pin_gpio_b5 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
-	};
-
-	pin_gpio_b7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "CPU_SM_WP";
-	};
-
-	pin_gpio_e0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
-		input;
-		line-name = "PDB_PSU_SEL";
-	};
-
-	pin_gpio_e2 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LOCATOR_LED_N";
-	};
-
-	pin_gpio_e5 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "FM_BMC_DBP_PRESENT_R1_N";
-	};
-
-	pin_gpio_e6 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_ME_SECURITY_OVERRIDE_N";
-	};
-
-	pin_gpio_f0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "IRQ_BMC_PCH_NMI_R";
-	};
-
-	pin_gpio_f1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
-		input;
-		line-name = "CPU2_PROCDIS_BMC_N";
-	};
-
-	pin_gpio_f2 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "RM_THROTTLE_EN_N";
-	};
-
-	pin_gpio_f3 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "FM_PMBUS_ALERT_B_EN";
-	};
-
-	pin_gpio_f4 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_FORCE_NM_THROTTLE_N";
-	};
-
-	pin_gpio_f6 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "FM_BMC_CPU_PWR_DEBUG_N";
-	};
-
-	pin_gpio_g7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_PCIE_I2C_MUX_RST_N";
-	};
-
-	pin_gpio_h6 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "FM_BMC_DBP_PRESENT_R2_N";
-	};
-
-	pin_gpio_i3 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "SPI_BMC_BIOS_WP_N";
-	};
-
-	pin_gpio_j1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_USB_SEL";
-	};
-
-	pin_gpio_j2 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PDB_SMB_RST_N";
-	};
-
-	pin_gpio_j3 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "SPI_BMC_BIOS_HOLD_N";
-	};
-
-	pin_gpio_l0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PDB_FAN_TACH_SEL";
-	};
-
-	pin_gpio_l1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "SYS_RESET_BMC_FPGA_N";
-	};
-
-	pin_gpio_l4 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "FM_EFUSE_FAN_G1_EN";
-	};
-
-	pin_gpio_l5 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "FM_EFUSE_FAN_G2_EN";
-	};
-
-	pin_gpio_r6 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
-		input;
-		line-name = "CPU3_PROCDIS_BMC_N";
-	};
-
-	pin_gpio_r7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
-		input;
-		line-name = "CPU4_PROCDIS_BMC_N";
-	};
-
-	pin_gpio_s1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "DBP_SYSPWROK_BMC";
-	};
-
-	pin_gpio_s2 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PCH_RST_RSMRST_N";
-	};
-
-	pin_gpio_s6 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_HW_STRAP_5";
-	};
-
-	pin_gpio_z3 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "FM_BMC_PCH_SCI_LPC_N";
-	};
-
-	pin_gpio_aa0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "FW_PSU_ALERT_EN_N";
-	};
-
-	pin_gpio_aa4 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "DBP_CPU_PREQ_N";
-	};
-
-	pin_gpio_ab3 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "BMC_WDTRST";
-	};
-
-	pin_gpio_ac6 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "ESPI_BMC_ALERT_N";
-	};
-
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
deleted file mode 100644
index 3ef8358ff764a..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
+++ /dev/null
@@ -1,207 +0,0 @@
-//SPDX-License-Identifier: GPL-2.0+
-
-/dts-v1/;
-
-#include "aspeed-g4.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Olympus BMC";
-	compatible = "microsoft,olympus-bmc", "aspeed,ast2400";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@40000000 {
-		reg = <0x40000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@5f000000 {
-			no-map;
-			reg = <0x5f000000 0x01000000>; /* 16M */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		bmc_heartbeat {
-			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		power_green {
-			gpios = <&gpio ASPEED_GPIO(U, 2) GPIO_ACTIVE_HIGH>;
-		};
-
-		power_amber {
-			gpios = <&gpio ASPEED_GPIO(U, 3) GPIO_ACTIVE_HIGH>;
-		};
-
-		identify {
-			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-		};
-
-		fault {
-			gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
-	};
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 =    <&pinctrl_adc0_default
-			&pinctrl_adc1_default
-			&pinctrl_adc2_default
-			&pinctrl_adc3_default
-			&pinctrl_adc4_default
-			&pinctrl_adc5_default
-			&pinctrl_adc6_default
-			&pinctrl_adc7_default>;
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-	};
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	tmp421@4c {
-		compatible = "ti,tmp421";
-		reg = <0x4c>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-
-	tmp421@4c {
-		compatible = "ti,tmp421";
-		reg = <0x4c>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&wdt2 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 =    <&pinctrl_pwm0_default
-			&pinctrl_pwm1_default
-			&pinctrl_pwm2_default
-			&pinctrl_pwm3_default
-			&pinctrl_pwm4_default
-			&pinctrl_pwm5_default
-			&pinctrl_pwm6_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
deleted file mode 100644
index c0847636f20b9..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
+++ /dev/null
@@ -1,329 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Inventec Corporation
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Lanyang BMC";
-	compatible = "inventec,lanyang-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		sys_boot_status {
-			label = "System_boot_status";
-			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>;
-		};
-
-		attention {
-			label = "Attention_locator";
-			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
-		};
-
-		plt_fault {
-			label = "Platform_fault";
-			gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
-		};
-
-		hdd_fault {
-			label = "Onboard_drive_fault";
-			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
-		};
-		bmc_err {
-			lable = "BMC_fault";
-			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
-		};
-
-		sys_err {
-			lable = "Sys_fault";
-			gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
-			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
-			<&adc 13>, <&adc 14>, <&adc 15>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-	};
-};
-
-&spi2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2ck_default
-		     &pinctrl_spi2cs0_default
-		     &pinctrl_spi2cs1_default
-		     &pinctrl_spi2miso_default
-		     &pinctrl_spi2mosi_default>;
-
-	flash@0 {
-		status = "okay";
-	};
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&lpc_snoop {
-	status = "okay";
-	snoop-ports = <0x80>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@55 {
-		compatible = "atmel,24c64";
-		reg = <0x55>;
-		pagesize = <32>;
-	};
-
-	rtc@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	tmp75@48 {
-		compatible = "ti,tmp75";
-		reg = <0x48>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&gpio {
-	pin_gpio_b0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_HDD1_PWR_EN";
-	};
-
-	pin_gpio_b5 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
-		input;
-		line-name = "BMC_USB1_OCI2";
-	};
-
-	pin_gpio_h5 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_CP0_PERST_ENABLE_R";
-	};
-
-	pin_gpio_z2 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "RST_PCA9546_U177_N";
-	};
-
-	pin_gpio_aa6 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_CP0_RESET_N";
-	};
-
-	pin_gpio_aa7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_TPM_RESET_N";
-	};
-
-	pin_gpio_ab0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "BMC_USB_PWRON_N";
-	};
-};
-
-&ibt {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
deleted file mode 100644
index 31ff19ef87a0b..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
+++ /dev/null
@@ -1,667 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Mowgli BMC";
-	compatible = "ibm,mowgli-bmc", "aspeed,ast2500";
-
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-air-water {
-			label = "air-water";
-			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 6)>;
-		};
-
-		event-checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		event-ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 2)>;
-		};
-
-		event-ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 0)>;
-		};
-
-		button-id {
-			label = "id-button";
-			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 1)>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
-			linux,code = <10>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
-			linux,code = <11>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-
-		event-fan4-presence {
-			label = "fan4-presence";
-			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		front-fault {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		power-button {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		front-id {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		fan0 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
-		};
-
-		fan2 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
-		};
-
-		fan3 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
-		};
-
-		fan4 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
-	};
-
-	iio-hwmon-12v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>;
-	};
-
-	iio-hwmon-5v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 1>;
-	};
-
-	iio-hwmon-3v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 2>;
-	};
-
-	iio-hwmon-vdd {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 3>;
-	};
-
-	iio-hwmon-vcs {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 5>;
-	};
-
-	iio-hwmon-vdn {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 7>;
-	};
-
-	iio-hwmon-vio {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 9>;
-	};
-
-	iio-hwmon-vddra {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 11>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-	iio-hwmon-vddrb {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 13>;
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-		&pinctrl_pwm2_default &pinctrl_pwm3_default
-		&pinctrl_pwm4_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@6 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-
-	fan@8 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@9 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "obmc-ubi";
-			};
-		};
-	};
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "alt-u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "alt-u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "alt-obmc-ubi";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* APSS */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-};
-
-&i2c1 {
-	status = "disabled";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* CPU MFG CONN */
-
-};
-
-&i2c3 {
-	status = "okay";
-
-	/* APSS */
-	/* CPLD */
-
-	/* PCA9516 (repeater) ->
-	 *    CLK Buffer 9FGS9092
-	 *    Power Supply 0
-	 *    Power Supply 1
-	 *    PCA 9552 LED
-	 */
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps1";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps1";
-		reg = <0x69>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	/* CP0 VDD & VCS : IR35221 */
-	/* CP0 VDN & VIO : IR35221 */
-	/* CP0 VDDR : IR35221 */
-
-	ir35221@28 {
-		compatible = "infineon,ir35221";
-		reg = <0x28>;
-	};
-
-	ir35221@29 {
-		compatible = "infineon,ir35221";
-		reg = <0x29>;
-	};
-
-	ir35221@2d {
-		compatible = "infineon,ir35221";
-		reg = <0x2d>;
-	};
-
-};
-
-&i2c5 {
-	status = "disabled";
-};
-
-&i2c6 {
-	status = "disabled";
-};
-
-&i2c7 {
-	status = "disabled";
-};
-
-&i2c8 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	/* PCIe G3 x16 slot */
-};
-
-&i2c10 {
-	status = "disabled";
-};
-
-&i2c11 {
-	status = "okay";
-
-	/* CPLD */
-	/* TPM */
-	/* RTC RX8900CE */
-	/* TMP275A */
-	/* TMP275A */
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-};
-
-&i2c12 {
-	status = "disabled";
-};
-
-&i2c13 {
-	status = "disabled";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-			&pinctrl_adc1_default
-			&pinctrl_adc2_default
-			&pinctrl_adc3_default
-			&pinctrl_adc4_default
-			&pinctrl_adc5_default
-			&pinctrl_adc6_default
-			&pinctrl_adc7_default
-			&pinctrl_adc8_default
-			&pinctrl_adc9_default
-			&pinctrl_adc10_default
-			&pinctrl_adc11_default
-			&pinctrl_adc12_default
-			&pinctrl_adc13_default
-			&pinctrl_adc14_default
-			&pinctrl_adc15_default>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
deleted file mode 100644
index ac0d666ca10ef..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
+++ /dev/null
@@ -1,326 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright 2019 YADRO
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Nicole BMC";
-	compatible = "yadro,nicole-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@9f000000 {
-			no-map;
-			reg = <0x9f000000 0x01000000>; /* 16M */
-		};
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		coldfire_memory: codefire_memory@9ef00000 {
-			reg = <0x9ef00000 0x00100000>;
-			no-map;
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;	/* 32M */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "platform:green:power";
-			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
-		};
-
-		identify {
-			label = "platform:blue:indicator";
-			gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
-		};
-
-		fault {
-			label = "platform:red:fault";
-			gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>;
-		};
-
-		attention {
-			label = "platform:yellow:alarm";
-			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		memory-region = <&coldfire_memory>;
-		aspeed,sram = <&sram>;
-		aspeed,cvic = <&cvic>;
-
-		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	use-ncsi;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-		pagesize = <64>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	/* CPU0 characterization connector */
-};
-
-&i2c3 {
-	status = "okay";
-	/* CLK GEN SI5338 */
-};
-
-&i2c4 {
-	status = "okay";
-	/* Voltage regulators for CPU0 */
-};
-
-&i2c5 {
-	status = "okay";
-	/* Voltage regulators for CPU1 */
-};
-
-&i2c6 {
-	status = "okay";
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-	/* CPLD */
-};
-
-&gpio {
-	gpio-line-names =
-	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"fsi-enable","bmc_power_up","sys_pwrok_buf",
-			"func_mode0","func_mode1","func_mode2","","",
-	/*E0-E7*/	"","ncsi_cfg","","","","","","",
-	/*F0-F7*/	"","","","","","","","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","checkstop","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","power-button","","","","","",
-	/*P0-P7*/	"","fsi-trans","pm_rtc_adc_en","","","","","",
-	/*Q0-Q7*/	"","","","","","","","id-button",
-	/*R0-R7*/	"","software_pwrgood","","","","","","",
-	/*S0-S7*/	"","","","","","","","seq_cont",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"fsi-clock","led-attention","fsi-data","led-fault",
-			"led-power","","","led-identify",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-
-	func_mode0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
-		output-low;
-	};
-	func_mode1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		output-low;
-	};
-	func_mode2 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
-		output-low;
-	};
-	seq_cont {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
-		output-low;
-	};
-	ncsi_cfg {
-		gpio-hog;
-		input;
-		gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-			&pinctrl_adc1_default
-			&pinctrl_adc2_default
-			&pinctrl_adc3_default
-			&pinctrl_adc4_default
-			&pinctrl_adc5_default
-			&pinctrl_adc6_default
-			&pinctrl_adc7_default
-			&pinctrl_adc8_default
-			&pinctrl_adc9_default
-			&pinctrl_adc10_default
-			&pinctrl_adc11_default
-			&pinctrl_adc12_default
-			&pinctrl_adc13_default
-			&pinctrl_adc14_default
-			&pinctrl_adc15_default>;
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
deleted file mode 100644
index 45631b47a7b39..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ /dev/null
@@ -1,373 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-
-#include "aspeed-g4.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Palmetto BMC";
-	compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@40000000 {
-		reg = <0x40000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@5f000000 {
-			no-map;
-			reg = <0x5f000000 0x01000000>; /* 16M */
-		};
-
-		coldfire_memory: codefire_memory@5ee00000 {
-			reg = <0x5ee00000 0x00200000>;
-			no-map;
-		};
-
-		flash_memory: region@5c000000 {
-			no-map;
-			reg = <0x5C000000 0x02000000>; /* 32MB */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
-		};
-
-		power {
-			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
-		};
-
-		identify {
-			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		memory-region = <&coldfire_memory>;
-		aspeed,sram = <&sram>;
-		aspeed,cvic = <&cvic>;
-
-		clock-gpios = <&gpio ASPEED_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(A, 5) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(P, 5)>;
-		};
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1debug_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		label = "pnor";
-	};
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flbusy_default &pinctrl_flwp_default
-
-			&pinctrl_vgahs_default &pinctrl_vgavs_default
-			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	use-ncsi;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-		pagesize = <64>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds3231";
-		reg = <0x68>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	tmp423@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-
-	occ-hwmon@50 {
-		compatible = "ibm,p8-occ-hwmon";
-		reg = <0x50>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&ibt {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi>;
-};
-
-&gpio {
-	pin_func_mode0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "func_mode0";
-	};
-
-	pin_func_mode1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(C, 5)  GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "func_mode1";
-	};
-
-	pin_func_mode2 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "func_mode2";
-	};
-
-	pin_gpio_a0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
-		input;
-		line-name = "BMC_FAN_RESERVED_N";
-	};
-
-	pin_gpio_a1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "APSS_WDT_N";
-	};
-
-	pin_gpio_b1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "APSS_BOOT_MODE";
-	};
-
-	pin_gpio_b2 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "APSS_RESET_N";
-	};
-
-	pin_gpio_b7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "SPIVID_STBY_RESET_N";
-	};
-
-	pin_gpio_d1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_POWER_UP";
-	};
-
-	pin_gpio_f1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
-		input;
-		line-name = "BMC_BATTERY_TEST";
-	};
-
-	pin_gpio_f4 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
-		input;
-		line-name = "AST_HW_FAULT_N";
-	};
-
-	pin_gpio_f5 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
-		input;
-		line-name = "AST_SYS_FAULT_N";
-	};
-
-	pin_gpio_f7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_FULL_SPEED_N";
-	};
-
-	pin_gpio_g3 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_FAN_ERROR_N";
-	};
-
-	pin_gpio_g4 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
-		input;
-		line-name = "BMC_WDT_RST1_P";
-	};
-
-	pin_gpio_g5 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
-		input;
-		line-name = "BMC_WDT_RST2_P";
-	};
-
-	pin_gpio_h0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
-		input;
-		line-name = "PE_SLOT_TEST_EN_N";
-	};
-
-	pin_gpio_h1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-		input;
-		line-name = "BMC_RTCRST_N";
-	};
-
-	pin_gpio_h2 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "SYS_PWROK_BMC";
-	};
-
-	pin_gpio_h7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "BMC_TPM_INT_N";
-	};
-};
-
-&fsi {
-	cfam@0,0 {
-		reg = <0 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <0>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		fsi_hub0: hub@3400 {
-			compatible = "ibm,fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			no-scan-on-init;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
deleted file mode 100644
index 893e621ecab11..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ /dev/null
@@ -1,354 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Romulus BMC";
-	compatible = "ibm,romulus-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@9f000000 {
-			no-map;
-			reg = <0x9f000000 0x01000000>; /* 16M */
-		};
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		coldfire_memory: codefire_memory@9ef00000 {
-			reg = <0x9ef00000 0x00100000>;
-			no-map;
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;	/* 32M */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		fault {
-			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		identify {
-			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-		};
-
-		power {
-			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		memory-region = <&coldfire_memory>;
-		aspeed,sram = <&sram>;
-		aspeed,cvic = <&cvic>;
-
-		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		id-button {
-			label = "id-button";
-			gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Q, 7)>;
-		};
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	use-ncsi;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	/* PCIe slot 1 (x8) */
-	status = "okay";
-};
-
-&i2c7 {
-	/* PCIe slot 2 (x16) */
-	status = "okay";
-};
-
-&i2c8 {
-	/* PCIe slot 3 (x16) */
-	status = "okay";
-};
-
-&i2c9 {
-	/* PCIe slot 4 (x16) */
-	status = "okay";
-};
-
-&i2c10 {
-	/* PCIe slot 5 (x8) */
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-
-	w83773g@4c {
-		compatible = "nuvoton,w83773g";
-		reg = <0x4c>;
-	};
-};
-
-&gpio {
-	gpio-line-names =
-	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"fsi-enable","","","nic_func_mode0","nic_func_mode1","","","",
-	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","","","","","","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","","power-button","","","","",
-	/*J0-J7*/	"","","checkstop","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","led-fault","",
-				"led-identify","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","","","id-button",
-	/*R0-R7*/	"","","fsi-trans","","","led-power","","",
-	/*S0-S7*/	"","","","","","","","seq_cont",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"fsi-clock","","fsi-data","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-
-	nic_func_mode0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
-		output-low;
-	};
-	nic_func_mode1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		output-low;
-	};
-	seq_cont {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
-		output-low;
-	};
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@1 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-
-	fan@2 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
-	};
-
-	fan@3 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
-	};
-
-	fan@4 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
-	};
-
-	fan@5 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
-	};
-
-	fan@6 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
-	};
-};
-
-&ibt {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
deleted file mode 100644
index bbf864f84d37f..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
+++ /dev/null
@@ -1,978 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Swift BMC";
-	compatible = "ibm,swift-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-air-water {
-			label = "air-water";
-			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(B, 5)>;
-		};
-
-		event-checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		event-ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(R, 7)>;
-		};
-
-		event-ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(N, 0)>;
-		};
-
-		event-oppanel-presence {
-			label = "oppanel-presence";
-			gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(A, 7)>;
-		};
-
-		event-opencapi-riser-presence {
-			label = "opencapi-riser-presence";
-			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(I, 0)>;
-		};
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-scm0-presence {
-			label = "scm0-presence";
-			gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		event-scm1-presence {
-			label = "scm1-presence";
-			gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		event-cpu0vrm-presence {
-			label = "cpu0vrm-presence";
-			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-
-		event-cpu1vrm-presence {
-			label = "cpu1vrm-presence";
-			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <5>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
-			linux,code = <8>;
-		};
-
-		event-fanboost-presence {
-			label = "fanboost-presence";
-			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		fan0 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
-		};
-
-		fan2 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
-		};
-
-		fan3 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
-		};
-
-		fanboost {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
-		};
-
-		front-fault {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		front-power {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
-		};
-
-		front-id {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
-		};
-
-		rear-fault {
-			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		rear-id {
-			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		clock-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
-	};
-
-	iio-hwmon-dps310 {
-		compatible = "iio-hwmon";
-		io-channels = <&dps 0>;
-	};
-
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x7F80000>;
-				label = "obmc-ubi";
-			};
-		};
-	};
-
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "alt-u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "alt-u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x7F80000>;
-				label = "alt-obmc-ubi";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* APSS */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	use-ncsi;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* MUX ->
-	 *    Samtec 1
-	 *    Samtec 2
-	 */
-};
-
-&i2c3 {
-	status = "okay";
-
-	max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@2 {
-			compatible = "pmbus-fan";
-			reg = <2>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@3 {
-			compatible = "pmbus-fan";
-			reg = <3>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@4 {
-			compatible = "pmbus-fan";
-			reg = <4>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-	};
-
-	pca0: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps2";
-		reg = <0x68>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps2";
-		reg = <0x69>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	si7021a20@20 {
-		compatible = "si,si7021a20";
-		reg = <0x20>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	pca1: pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
-			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
-			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
-			"P9_SCM0_PRES",	"P9_SCM1_PRES",
-			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
-			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
-			"PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N",
-			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	ucd90160@64 {
-		compatible = "ti,ucd90160";
-		reg = <0x64>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	pca2: pca9539@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-		};
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	pca3: pca9539@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-		};
-	};
-};
-
-&i2c11 {
-	/* MUX
-	 *   -> PCIe Slot 0
-	 *   -> PCIe Slot 1
-	 *   -> PCIe Slot 2
-	 *   -> PCIe Slot 3
-	 */
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&sdmmc {
-       status = "okay";
-};
-
-&sdhci1 {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_sd2_default>;
-};
-
-#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
deleted file mode 100644
index 3f6010ef2b86f..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ /dev/null
@@ -1,887 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2019 IBM Corp.
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Tacoma";
-	compatible = "ibm,tacoma-bmc", "aspeed,ast2600";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200n8 earlycon";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x4000000>; /* 64M */
-		};
-
-		ramoops@bc000000 {
-			compatible = "ramoops";
-			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
-			record-size = <0x8000>;
-			console-size = <0x8000>;
-			pmsg-size = <0x8000>;
-			max-reason = <3>; /* KMSG_DUMP_EMERG */
-		};
-
-		vga_memory: region@bf000000 {
-			no-map;
-			compatible = "shared-dma-pool";
-			reg = <0xbf000000 0x01000000>;	/* 16M */
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 3)>;
-		};
-
-		event-ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(E, 5)>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
-			linux,code = <4>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <5>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-	};
-
-	iio-hwmon-dps310 {
-		compatible = "iio-hwmon";
-		io-channels = <&dps 0>;
-	};
-
-	iio-hwmon-bmp280 {
-		compatible = "iio-hwmon";
-		io-channels = <&bmp 1>;
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&gpio0 {
-	gpio-line-names =
-	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"fsi-mux","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"power-button","","","checkstop","","presence-ps1","","led-rear-fault",
-	/*F0-F7*/	"","","","","","","","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","presence-ps0","","","","",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"led-rear-power","led-rear-id","","usb-power","","","","",
-	/*P0-P7*/	"","","","","","bmc-tpm-reset","","",
-	/*Q0-Q7*/	"cfam-reset","","","","","","","fsi-routing",
-	/*R0-R7*/	"","","","","","","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
-	};
-
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt-bmc";
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&mac2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii3_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
-		 <&syscon ASPEED_CLK_MAC3RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&emmc_controller {
-	status = "okay";
-};
-
-&emmc {
-	status = "okay";
-	clk-phase-mmc-hs200 = <36>, <270>;
-};
-
-&fsim0 {
-	status = "okay";
-
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
-	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
-
-	cfam@0,0 {
-		reg = <0 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <0>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_i2c0: i2c-bus@0 {
-				reg = <0>;
-			};
-
-			cfam0_i2c1: i2c-bus@1 {
-				reg = <1>;
-			};
-
-			cfam0_i2c2: i2c-bus@2 {
-				reg = <2>;
-			};
-
-			cfam0_i2c3: i2c-bus@3 {
-				reg = <3>;
-			};
-
-			cfam0_i2c4: i2c-bus@4 {
-				reg = <4>;
-			};
-
-			cfam0_i2c5: i2c-bus@5 {
-				reg = <5>;
-			};
-
-			cfam0_i2c6: i2c-bus@6 {
-				reg = <6>;
-			};
-
-			cfam0_i2c7: i2c-bus@7 {
-				reg = <7>;
-			};
-
-			cfam0_i2c8: i2c-bus@8 {
-				reg = <8>;
-			};
-
-			cfam0_i2c9: i2c-bus@9 {
-				reg = <9>;
-			};
-
-			cfam0_i2c10: i2c-bus@a {
-				reg = <10>;
-			};
-
-			cfam0_i2c11: i2c-bus@b {
-				reg = <11>;
-			};
-
-			cfam0_i2c12: i2c-bus@c {
-				reg = <12>;
-			};
-
-			cfam0_i2c13: i2c-bus@d {
-				reg = <13>;
-			};
-
-			cfam0_i2c14: i2c-bus@e {
-				reg = <14>;
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ0: occ {
-				compatible = "ibm,p9-occ";
-			};
-		};
-
-		fsi_hub0: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-};
-
-&fsi_hub0 {
-	cfam@1,0 {
-		reg = <1 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <1>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_i2c0: i2c-bus@0 {
-				reg = <0>;
-			};
-
-			cfam1_i2c1: i2c-bus@1 {
-				reg = <1>;
-			};
-
-			cfam1_i2c2: i2c-bus@2 {
-				reg = <2>;
-			};
-
-			cfam1_i2c3: i2c-bus@3 {
-				reg = <3>;
-			};
-
-			cfam1_i2c4: i2c-bus@4 {
-				reg = <4>;
-			};
-
-			cfam1_i2c5: i2c-bus@5 {
-				reg = <5>;
-			};
-
-			cfam1_i2c6: i2c-bus@6 {
-				reg = <6>;
-			};
-
-			cfam1_i2c7: i2c-bus@7 {
-				reg = <7>;
-			};
-
-			cfam1_i2c8: i2c-bus@8 {
-				reg = <8>;
-			};
-
-			cfam1_i2c9: i2c-bus@9 {
-				reg = <9>;
-			};
-
-			cfam1_i2c10: i2c-bus@a {
-				reg = <10>;
-			};
-
-			cfam1_i2c11: i2c-bus@b {
-				reg = <11>;
-			};
-
-			cfam1_i2c12: i2c-bus@c {
-				reg = <12>;
-			};
-
-			cfam1_i2c13: i2c-bus@d {
-				reg = <13>;
-			};
-
-			cfam1_i2c14: i2c-bus@e {
-				reg = <14>;
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ1: occ {
-				compatible = "ibm,p9-occ";
-			};
-		};
-
-		fsi_hub1: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-};
-
-/* Legacy OCC numbering (to get rid of when userspace is fixed) */
-&fsi_occ0 {
-	reg = <1>;
-};
-
-&fsi_occ1 {
-	reg = <2>;
-};
-
-/ {
-	aliases {
-		i2c100 = &cfam0_i2c0;
-		i2c101 = &cfam0_i2c1;
-		i2c102 = &cfam0_i2c2;
-		i2c103 = &cfam0_i2c3;
-		i2c104 = &cfam0_i2c4;
-		i2c105 = &cfam0_i2c5;
-		i2c106 = &cfam0_i2c6;
-		i2c107 = &cfam0_i2c7;
-		i2c108 = &cfam0_i2c8;
-		i2c109 = &cfam0_i2c9;
-		i2c110 = &cfam0_i2c10;
-		i2c111 = &cfam0_i2c11;
-		i2c112 = &cfam0_i2c12;
-		i2c113 = &cfam0_i2c13;
-		i2c114 = &cfam0_i2c14;
-		i2c200 = &cfam1_i2c0;
-		i2c201 = &cfam1_i2c1;
-		i2c202 = &cfam1_i2c2;
-		i2c203 = &cfam1_i2c3;
-		i2c204 = &cfam1_i2c4;
-		i2c205 = &cfam1_i2c5;
-		i2c206 = &cfam1_i2c6;
-		i2c207 = &cfam1_i2c7;
-		i2c208 = &cfam1_i2c8;
-		i2c209 = &cfam1_i2c9;
-		i2c210 = &cfam1_i2c10;
-		i2c211 = &cfam1_i2c11;
-		i2c212 = &cfam1_i2c12;
-		i2c213 = &cfam1_i2c13;
-		i2c214 = &cfam1_i2c14;
-	};
-
-};
-
-&i2c0 {
-	multi-master;
-	status = "okay";
-
-	ibm-panel@62 {
-		compatible = "ibm,op-panel";
-		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	tpm: tpm@2e {
-		compatible = "tcg,tpm-tis-i2c";
-		reg = <0x2e>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	bmp: bmp280@77 {
-		compatible = "bosch,bmp280";
-		reg = <0x77>;
-		#io-channel-cells = <1>;
-	};
-
-	max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@2 {
-			compatible = "pmbus-fan";
-			reg = <2>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@3 {
-			compatible = "pmbus-fan";
-			reg = <3>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-	};
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-
-	pca0: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps1";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps1";
-		reg = <0x69>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
-			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
-			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
-			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
-			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
-			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
-			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
-			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	ucd90160@64 {
-		compatible = "ti,ucd90160";
-		reg = <0x64>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&ibt {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-	// Workaround for A0
-	compatible = "snps,dw-apb-uart";
-};
-
-&uart5 {
-	// Workaround for A0
-	compatible = "snps,dw-apb-uart";
-};
-
-&vuart1 {
-	status = "okay";
-};
-
-&vuart2 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	status = "okay";
-};
-
-&pinctrl {
-	/* Hog these as no driver is probed for the entire LPC block */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpc_default>,
-		    <&pinctrl_lsirq_default>;
-};
-
-&xdma {
-	status = "okay";
-	memory-region = <&vga_memory>;
-};
-
-&kcs2 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca8 0xcac>;
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
deleted file mode 100644
index 8a7fb55ab4893..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ /dev/null
@@ -1,248 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright 2019 YADRO
-/dts-v1/;
-
-#include "aspeed-g4.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Vesnin BMC";
-	compatible = "yadro,vesnin-bmc", "aspeed,ast2400";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@40000000 {
-		reg = <0x40000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@5f000000 {
-			no-map;
-			reg = <0x5f000000 0x01000000>; /* 16MB */
-		};
-		flash_memory: region@5c000000 {
-			no-map;
-			reg = <0x5c000000 0x02000000>; /* 32M */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
-		};
-		power_red {
-			gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		power_green {
-			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		id_blue {
-			gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		alarm_red {
-			gpios = <&gpio ASPEED_GPIO(N, 6) GPIO_ACTIVE_LOW>;
-		};
-
-		alarm_yel {
-			gpios = <&gpio ASPEED_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-checkstop {
-			label = "checkstop";
-			linux,code = <74>;
-			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
-		};
-
-		event-identify {
-			label = "identify";
-			linux,code = <152>;
-			gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-        label = "bmc";
-#include "openbmc-flash-layout.dtsi"
-	};
-
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt";
-	};
-};
-
-&spi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1debug_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-	};
-};
-
-&mac0 {
-	status = "okay";
-	use-ncsi;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-};
-
-
-&uart5 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi>;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-		pagesize = <64>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	tmp75@49 {
-		compatible = "ti,tmp75";
-		reg = <0x49>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-
-	occ-hwmon@50 {
-		compatible = "ibm,p8-occ-hwmon";
-		reg = <0x50>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	occ-hwmon@51 {
-		compatible = "ibm,p8-occ-hwmon";
-		reg = <0x51>;
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	w83795g@2f {
-		compatible = "nuvoton,w83795g";
-		reg = <0x2f>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	occ-hwmon@56 {
-		compatible = "ibm,p8-occ-hwmon";
-		reg = <0x56>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	occ-hwmon@57 {
-		compatible = "ibm,p8-occ-hwmon";
-		reg = <0x57>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-
-	rtc@68 {
-		compatible = "maxim,ds3231";
-		reg = <0x68>;
-	};
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&sdmmc {
-	status = "okay";
-};
-
-&sdhci1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sd2_default>;
-	cd-inverted;
-	disable-wp;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
deleted file mode 100644
index a20a532fc2805..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ /dev/null
@@ -1,704 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Witherspoon BMC";
-	compatible = "ibm,witherspoon-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		vga_memory: region@9f000000 {
-			no-map;
-			compatible = "shared-dma-pool";
-			reg = <0x9f000000 0x01000000>; /* 16M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;	/* 32MM */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-air-water {
-			label = "air-water";
-			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(B, 5)>;
-		};
-
-		event-checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		event-ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(P, 7)>;
-		};
-
-		event-ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(N, 0)>;
-		};
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
-			linux,code = <4>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <5>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		fan0 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
-		};
-
-		fan2 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
-		};
-
-		fan3 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
-		};
-
-		front-fault {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
-		};
-
-		front-power {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
-		};
-
-		front-id {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
-		};
-
-		rear-fault {
-			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		rear-id {
-			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
-		};
-
-		rear-power {
-			gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
-		};
-
-		power-button {
-			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-	};
-
-	iio-hwmon-dps310 {
-		compatible = "iio-hwmon";
-		io-channels = <&dps 0>;
-	};
-
-	iio-hwmon-bmp280 {
-		compatible = "iio-hwmon";
-		io-channels = <&bmp 1>;
-	};
-
-};
-
-&gpio {
-	gpio-line-names =
-	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
-	/*B0-B7*/	"","","","","","air-water","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"fsi-enable","","","","","","","",
-	/*E0-E7*/	"fsi-data","","","","","","","",
-	/*F0-F7*/	"","","","","","","","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","checkstop","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"presence-ps1","","led-rear-fault","led-rear-power",
-		        "led-rear-id","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","presence-ps0",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","fsi-trans","","","power-button","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"fsi-clock","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "obmc-ubi";
-			};
-		};
-	};
-
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "alt-u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "alt-u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "alt-obmc-ubi";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* APSS */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* MUX ->
-	 *    Samtec 1
-	 *    Samtec 2
-	 */
-};
-
-&i2c3 {
-	status = "okay";
-
-	bmp: bmp280@77 {
-		compatible = "bosch,bmp280";
-		reg = <0x77>;
-		#io-channel-cells = <1>;
-	};
-
-	max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-
-	pca0: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps1";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps1";
-		reg = <0x69>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-};
-
-
-&i2c5 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-};
-
-&i2c10 {
-	/* MUX
-	 *   -> PCIe Slot 3
-	 *   -> PCIe Slot 4
-	 */
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
-			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
-			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
-			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
-			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
-			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
-			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
-			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	ucd90160@64 {
-		compatible = "ti,ucd90160";
-		reg = <0x64>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&xdma {
-	status = "okay";
-	memory-region = <&vga_memory>;
-};
-
-#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
deleted file mode 100644
index 0cb7b20ff3ab8..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ /dev/null
@@ -1,578 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Zaius BMC";
-	compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
-
-	aliases {
-		i2c15 = &i2cpcie0;
-		i2c16 = &i2cpcie1;
-		i2c17 = &i2cpcie2;
-		i2c19 = &i2cpcie3;
-		i2c20 = &i2cpcie4;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-	};
-
-	onewire0 {
-		compatible = "w1-gpio";
-		gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
-	};
-
-	onewire1 {
-		compatible = "w1-gpio";
-		gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-	};
-
-	onewire2 {
-		compatible = "w1-gpio";
-		gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-	};
-
-	onewire3 {
-		compatible = "w1-gpio";
-		gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 7)>;
-		};
-
-		event-pcie-e2b-present{
-			label = "pcie-e2b-present";
-			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(E, 7)>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		sys_boot_status {
-			label = "System boot status";
-			gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
-		};
-
-		attention {
-			label = "Attention";
-			gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
-		};
-
-		plt_fault {
-			label = "Platform fault";
-			gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
-		};
-
-		hdd_fault {
-			label = "Onboard drive fault";
-			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
-			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
-			<&adc 13>, <&adc 14>, <&adc 15>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&spi2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2ck_default
-		     &pinctrl_spi2cs0_default
-		     &pinctrl_spi2cs1_default
-		     &pinctrl_spi2miso_default
-		     &pinctrl_spi2mosi_default>;
-
-	flash@0 {
-		status = "okay";
-	};
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&lpc_snoop {
-	status = "okay";
-	snoop-ports = <0x80>;
-};
-
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	rtc@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	ucd90160@64 {
-		compatible = "ti,ucd90160";
-		reg = <0x64>;
-	};
-
-	/* Power sequencer UCD90160 PMBUS @64h
-	 * FRU AT24C64D @50h
-	 * RTC PCF8523 @68h
-	 * Clock buffer 9DBL04 @6dh
-	 */
-};
-
-&i2c1 {
-	status = "okay";
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9546";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2cpcie0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-		i2cpcie1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-		i2cpcie2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-		i2ctpm: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	/* MUX1 PCA9546A @71h
-	 *   PCIe 0
-	 *   PCIe 1
-	 *   PCIe 2
-	 *   TPM header
-	 */
-};
-
-&i2c2 {
-	status = "disabled";
-
-	/* OCP Mezz Connector A (OOB SMBUS) */
-};
-
-&i2c3 {
-	status = "disabled";
-
-	/* OCP Mezz Connector A (PCIe slot SMBUS) */
-};
-
-&i2c4 {
-	status = "okay";
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9546";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2cpcie3: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-		i2cpcie4: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-	};
-
-	/* MUX1 PCA9546A @71h
-	 *   PCIe 3
-	 *   PCIe 4
-	 */
-};
-
-
-&i2c5 {
-	status = "disabled";
-
-	/* CPU0 PRM 0.7V */
-	/* CPU0 PRM 1.2V CH03 */
-	/* CPU0 PRM 0.8V */
-	/* CPU0 PRM 1.2V CH47 */
-};
-
-&i2c6 {
-	status = "disabled";
-
-	/* CPU1 PRM 0.7V */
-	/* CPU1 PRM 1.2V CH03 */
-	/* CPU1 PRM 0.8V */
-	/* CPU1 PRM 1.2V CH47 */
-};
-
-&i2c7 {
-	status = "okay";
-
-	pca9541a@70 {
-		compatible = "nxp,pca9541";
-		reg = <0x70>;
-
-		i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			hotswap@54 {
-				compatible = "ti,lm5066i";
-				reg = <0x54>;
-			};
-		};
-
-	};
-
-	vrm@64 {
-		compatible = "isil,isl68137";
-		reg = <0x64>;
-	};
-
-	vrm@40 {
-		compatible = "isil,isl68137";
-		reg = <0x40>;
-	};
-
-	vrm@60 {
-		compatible = "isil,isl68137";
-		reg = <0x60>;
-	};
-
-	vrm@43 {
-		compatible = "infineon,ir38064";
-		reg = <0x43>;
-	};
-
-	vrm@41 {
-		compatible = "isil,isl68137";
-		reg = <0x41>;
-	};
-
-	/* Master selector PCA9541A @70h (other master: CPU0)
-	 *   LM5066I PMBUS @10h
-	 */
-
-	/*
-	 * Brick will be one of these types/addresses.  Depending
-	 * on the board SKU only one is actually present and will successfully
-	 * instantiate while the others will fail the probe operation.
-	 * These are the PVT (and presumably beyond) addresses:
-	 *    12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah
-	 *    12V Quarter Brick DC/DC Converter Q54SH12050 @30h
-	 */
-	power-brick@6a {
-		compatible = "delta,dps800";
-		reg = <0x6a>;
-	};
-	power-brick@30 {
-		compatible = "delta,dps800";
-		reg = <0x30>;
-	};
-
-	/* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
-	/* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
-	/* CPU0 VR ISL68137 0.8V PMBUS @60h */
-	/* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */
-	/* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
-	/* Master selector PCA9541A @70h (other master: CPU0)
-	 *   LM5066I PMBUS @10h
-	 */
-};
-
-&i2c8 {
-	status = "okay";
-
-	vrm@64 {
-		compatible = "isil,isl68137";
-		reg = <0x64>;
-	};
-
-	vrm@40 {
-		compatible = "isil,isl68137";
-		reg = <0x40>;
-	};
-
-	vrm@41 {
-		compatible = "isil,isl68137";
-		reg = <0x41>;
-	};
-
-	vrm@42 {
-		compatible = "infineon,ir38064";
-		reg = <0x42>;
-	};
-
-	vrm@60 {
-		compatible = "isil,isl68137";
-		reg = <0x60>;
-	};
-
-	/* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */
-	/* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */
-	/* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */
-	/* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
-	/* CPU1 VR ISL68137 0.8V PMBUS @60h */
-};
-
-
-&i2c9 {
-	status = "disabled";
-
-	/* Fan board */
-};
-
-&i2c10 {
-	status = "disabled";
-};
-
-&i2c11 {
-	status = "disabled";
-
-	/* GPU sideband */
-};
-
-&i2c12 {
-	status = "disabled";
-};
-
-&i2c13 {
-	status = "disabled";
-
-	/* MUX PI3USB102
-	 *   CPU0 debug
-	 *   CPU1 debug
-	 */
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-
-	pinctrl_gpioh_unbiased: gpioi_unbiased {
-		pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
-		bias-disable;
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpioh_unbiased>;
-
-	gpio-line-names =
-	/*A0-A7*/	"","cfam-reset","","","","","","",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"fsi-enable","","","","","led-sys-boot-status","led-attention",
-				"led-fault",
-	/*E0-E7*/	"","","","","","","","presence-pcie-e2b",
-	/*F0-F7*/	"","","","","","","","checkstop",
-	/*G0-G7*/	"fsi-clock","fsi-data","","","","","","",
-	/*H0-H7*/	"onewire0","onewire1","onewire2","onewire3","","","","",
-	/*I0-I7*/	"","","","power-button","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","iso_u164_en","","fsi-trans","",
-	/*P0-P7*/	"ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","",
-				"","fsi-mux","",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","","","","","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","led-hdd-fault","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-
-	line_iso_u146_en {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-	};
-
-	ncsi_mux_en_n {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
-		output-low;
-	};
-
-	line_bmc_i2c2_sw_rst_n {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
-		output-high;
-	};
-
-	line_bmc_i2c5_sw_rst_n {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
-		output-high;
-	};
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-};
-
-&ibt {
-	status = "okay";
-};
-
-#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
deleted file mode 100644
index a5e64ccc2b3a4..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
+++ /dev/null
@@ -1,167 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2017 Facebook Inc.
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Portwell Neptune BMC";
-	compatible = "portwell,neptune-bmc", "aspeed,ast2500";
-	aliases {
-		serial0 = &uart1;
-		serial4 = &uart5;
-	};
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		postcode0 {
-			label = "BMC_UP";
-			gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-		postcode1 {
-			label = "BMC_HB";
-			gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-		postcode2 {
-			label = "FAULT";
-			gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-		};
-		// postcode3-7 are GPIOH3-H7
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-	};
-};
-
-&uart1 {
-	// Host Console
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
-};
-
-&uart5 {
-	// BMC Console
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default
-		     &pinctrl_mdio1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-};
-
-&mac1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii2_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
-		 <&syscon ASPEED_CLK_MAC2RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&i2c1 {
-	status = "okay";
-	// To PCIe slot SMBUS
-};
-
-&i2c2 {
-	status = "okay";
-	// To LAN I210
-};
-
-&i2c3 {
-	status = "okay";
-	// SMBus to COMe AB
-};
-
-&i2c4 {
-	status = "okay";
-	// I2C to COMe AB
-};
-
-&i2c5 {
-	status = "okay";
-// 	USB Debug card
-	pca9555@27 {
-		compatible = "nxp,pca9555";
-		reg = <0x27>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&i2c6 {
-	status = "okay";
-	tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-	};
-	tmp421@4e {
-		compatible = "ti,tmp421";
-		reg = <0x4e>;
-	};
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-		pagesize = <32>;
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts b/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts
deleted file mode 100644
index 259ef3f54c5cc..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
-
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-
-/ {
-	model = "Qualcomm DC-SCM V1 BMC";
-	compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600";
-
-	aliases {
-		serial4 = &uart5;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-};
-
-&mdio3 {
-	status = "okay";
-
-	ethphy3: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&mac2 {
-	status = "okay";
-
-	/* Bootloader sets up the MAC to insert delay */
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy3>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii3_default>;
-};
-
-&mac3 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii4_default>;
-
-	use-ncsi;
-};
-
-&rtc {
-	status = "okay";
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <133000000>;
-#include "openbmc-flash-layout-64.dtsi"
-	};
-
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt-bmc";
-		spi-max-frequency = <133000000>;
-#include "openbmc-flash-layout-64-alt.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bios";
-		spi-max-frequency = <133000000>;
-	};
-};
-
-&gpio0 {
-	gpio-line-names =
-	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"BMC_FLASH_MUX_SEL","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","","","","","","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"BMC_FWSPI_RST_N","","GPIO_1_BMC_3V3","","","","","",
-	/*O0-O7*/	"JTAG_MUX_A","JTAG_MUX_B","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","","","","","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","SCMFPGA_SPARE_GPIO1_3V3",
-			"SCMFPGA_SPARE_GPIO2_3V3","SCMFPGA_SPARE_GPIO3_3V3",
-			"SCMFPGA_SPARE_GPIO4_3V3","SCMFPGA_SPARE_GPIO5_3V3",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-&gpio1 {
-	gpio-line-names =
-	/*A0-A7*/	"GPI_1_BMC_1V8","","","","","",
-			"SCMFPGA_SPARE_GPIO1_1V8","SCMFPGA_SPARE_GPIO2_1V8",
-	/*B0-B7*/	"SCMFPGA_SPARE_GPIO3_1V8","SCMFPGA_SPARE_GPIO4_1V8",
-			"SCMFPGA_SPARE_GPIO5_1V8","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","BMC_SPI1_RST_N","BIOS_FLASH_MUX_SEL","",
-			"","TPM2_PIRQ_N","TPM2_RST_N","",
-	/*E0-E7*/	"","","","","","","","";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&i2c14 {
-	status = "okay";
-};
-
-&i2c15 {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
deleted file mode 100644
index 9605e53f5bbfc..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
+++ /dev/null
@@ -1,518 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "aspeed-g4.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Quanta Q71L BMC";
-	compatible = "quanta,q71l-bmc", "aspeed,ast2400";
-
-	aliases {
-		i2c14 = &i2c_pcie2;
-		i2c15 = &i2c_pcie3;
-		i2c16 = &i2c_pcie6;
-		i2c17 = &i2c_pcie7;
-		i2c18 = &i2c_pcie1;
-		i2c19 = &i2c_pcie4;
-		i2c20 = &i2c_pcie5;
-		i2c21 = &i2c_pcie8;
-		i2c22 = &i2c_pcie9;
-		i2c23 = &i2c_pcie10;
-		i2c24 = &i2c_ssd1;
-		i2c25 = &i2c_ssd2;
-		i2c26 = &i2c_psu4;
-		i2c27 = &i2c_psu1;
-		i2c28 = &i2c_psu3;
-		i2c29 = &i2c_psu2;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@40000000 {
-		reg = <0x40000000 0x8000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@47800000 {
-			no-map;
-			reg = <0x47800000 0x00800000>; /* 8MB */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		power {
-			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		identify {
-			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
-			<&adc 8>, <&adc 9>, <&adc 10>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 11>;
-	};
-
-	i2c1mux: i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* mux-gpios = <&sgpio 10 GPIO_ACTIVE_HIGH> */
-		i2c-parent = <&i2c1>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-	};
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default
-			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
-};
-
-&p2a {
-	status = "okay";
-	memory-region = <&vga_memory>;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-};
-
-&lpc_snoop {
-	status = "okay";
-	snoop-ports = <0x80>;
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	/* temp2 inlet */
-	tmp75@4c {
-		compatible = "ti,tmp75";
-		reg = <0x4c>;
-	};
-
-	/* temp3 */
-	tmp75@4e {
-		compatible = "ti,tmp75";
-		reg = <0x4e>;
-	};
-
-	/* temp1 */
-	tmp75@4f {
-		compatible = "ti,tmp75";
-		reg = <0x4f>;
-	};
-
-	/* Baseboard FRU */
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-
-	/* FP FRU */
-	eeprom@57 {
-		compatible = "atmel,24c64";
-		reg = <0x57>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* 0: PCIe Slot 2,
-	 *    Slot 3,
-	 *    Slot 6,
-	 *    Slot 7
-	 */
-	i2c-switch@74 {
-		compatible = "nxp,pca9546";
-		reg = <0x74>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;  /* may use mux@77 next. */
-
-		i2c_pcie2: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c_pcie3: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c_pcie6: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c_pcie7: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	/* 0: PCIe Slot 1,
-	 *    Slot 4,
-	 *    Slot 5,
-	 *    Slot 8,
-	 *    Slot 9,
-	 *    Slot 10,
-	 *    SSD 1,
-	 *    SSD 2
-	 */
-	i2c-switch@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-		i2c-mux-idle-disconnect;  /* may use mux@74 next. */
-
-		i2c_pcie1: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c_pcie4: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c_pcie5: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c_pcie8: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		i2c_pcie9: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		i2c_pcie10: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		i2c_ssd1: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		i2c_ssd2: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c3 {
-	status = "okay";
-
-	/* BIOS FRU */
-	eeprom@56 {
-		compatible = "atmel,24c64";
-		reg = <0x56>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-
-	/* 0: PSU4
-	 *    PSU1
-	 *    PSU3
-	 *    PSU2
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c_psu4: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			psu@59 {
-				compatible = "pmbus";
-				reg = <0x59>;
-			};
-		};
-
-		i2c_psu1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			psu@58 {
-				compatible = "pmbus";
-				reg = <0x58>;
-			};
-		};
-
-		i2c_psu3: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			psu@58 {
-				compatible = "pmbus";
-				reg = <0x58>;
-			};
-		};
-
-		i2c_psu2: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			psu@59 {
-				compatible = "pmbus";
-				reg = <0x59>;
-			};
-		};
-	};
-
-	/* PDB FRU */
-	eeprom@52 {
-		compatible = "atmel,24c64";
-		reg = <0x52>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	/* BMC FRU */
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&vuart {
-	status = "okay";
-};
-
-&wdt2 {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&pwm_tacho {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default
-		&pinctrl_pwm1_default
-		&pinctrl_pwm2_default
-		&pinctrl_pwm3_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@6 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-};
-
-&i2c1mux {
-	i2c@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Memory Riser 1 FRU */
-		eeprom@50 {
-			compatible = "atmel,24c02";
-			reg = <0x50>;
-		};
-
-		/* Memory Riser 2 FRU */
-		eeprom@51 {
-			compatible = "atmel,24c02";
-			reg = <0x51>;
-		};
-
-		/* Memory Riser 3 FRU */
-		eeprom@52 {
-			compatible = "atmel,24c02";
-			reg = <0x52>;
-		};
-
-		/* Memory Riser 4 FRU */
-		eeprom@53 {
-			compatible = "atmel,24c02";
-			reg = <0x53>;
-		};
-	};
-
-	i2c@1 {
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Memory Riser 5 FRU */
-		eeprom@50 {
-			compatible = "atmel,24c02";
-			reg = <0x50>;
-		};
-
-		/* Memory Riser 6 FRU */
-		eeprom@51 {
-			compatible = "atmel,24c02";
-			reg = <0x51>;
-		};
-
-		/* Memory Riser 7 FRU */
-		eeprom@52 {
-			compatible = "atmel,24c02";
-			reg = <0x52>;
-		};
-
-		/* Memory Riser 8 FRU */
-		eeprom@53 {
-			compatible = "atmel,24c02";
-			reg = <0x53>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts
deleted file mode 100644
index 46cbba6305b8f..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts
+++ /dev/null
@@ -1,610 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2022 Quanta Corp.
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-
-/ {
-	model = "Quanta S6Q BMC";
-	compatible = "quanta,s6q-bmc", "aspeed,ast2600";
-
-	aliases {
-		// bus 0
-		i2c20 = &SMB_HOST_DB2000_3V3AUX_SCL;
-		i2c21 = &U12_PCA9546_CH1;
-		i2c22 = &SMB_HOST_DB800_B_SCL;
-		i2c23 = &SMB_HOST_DB800_C_SCL;
-
-		// bus 1
-		i2c24 = &SMB_M2_P0_1V8AUX_SCL;
-		i2c25 = &SMB_M2_P1_1V8AUX_SCL;
-		i2c26 = &SMB_CPU_PIROM_3V3AUX_SCL;
-		i2c27 = &SMB_TEMP_3V3AUX_SCL;
-		i2c28 = &SMB_IPMB_3V3AUX_SSDSB_SCL;
-		i2c29 = &SMB_IPMB_3V3AUX_SCL;
-		i2c31 = &SMB_FB_SCL;
-
-		// bus 1 - Fan board
-		i2c32 = &SMB_IOEXP_SCL;
-		i2c33 = &SMB_PROGRAM_SCL;
-		i2c34 = &SMB_FB_SCL_CH2;
-		i2c35 = &SMB_FAN_SENSE_SCL;
-
-		// bus 6
-		i2c36 = &U197_PCA9546_CH0;
-		i2c37 = &U197_PCA9546_CH1;
-		i2c38 = &U197_PCA9546_CH2;
-		i2c39 = &U197_PCA9546_CH3;
-
-		//bus 7
-		i2c40 = &SMB_OCP_SFF_3V3AUX_SCL; //OCP1
-		i2c41 = &SMB_OCP_LFF_3V3AUX_SCL; //OCP2
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200n8 earlycon";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
-			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
-			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
-			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		BMC_HEARTBEAT_N {
-			label = "BMC_HEARTBEAT_N";
-			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		BMC_LED_STATUS_AMBER_N {
-			label = "BMC_LED_STATUS_AMBER_N";
-			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		FM_ID_LED_N {
-			label = "FM_ID_LED_N";
-			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-};
-
-&gpio0 {
-	gpio-line-names =
-	/*A0 - A7*/	"", "", "", "", "", "", "", "",
-	/*B0 - B7*/	"", "", "", "", "", "", "", "",
-	/*C0 - C7*/	"", "", "", "", "", "", "", "",
-	/*D0 - D7*/	"", "", "", "", "", "", "", "",
-	/*E0 - E7*/	"", "", "", "", "", "", "", "",
-	/*F0 - F7*/	"PLTRST_N", "", "PWR_DEBUG_N", "", "", "", "", "",
-	/*G0 - G7*/	"", "", "", "", "", "", "", "",
-	/*H0 - H7*/	"", "", "", "", "", "", "", "",
-	/*I0 - I7*/	"", "", "", "", "", "", "", "",
-	/*J0 - J7*/	"", "", "", "", "", "", "", "",
-	/*K0 - K7*/	"", "", "", "", "", "", "", "",
-	/*L0 - L7*/	"", "", "", "", "PREQ_N", "TCK_MUX_SEL", "", "",
-	/*M0 - M7*/	"", "", "", "PWRGD_SYS_PWROK", "", "PRDY_N", "", "",
-	/*N0 - N7*/	"", "", "", "", "", "", "", "",
-	/*O0 - O7*/	"", "", "", "", "", "", "", "",
-	/*P0 - P7*/	"SYS_BMC_PWRBTN_R_N", "SYS_PWRBTN_N", "FM_MB_RST_BTN", "RST_BMC_RSTBTN_OUT_N", "", "", "", "",
-	/*Q0 - Q7*/	"", "", "", "", "", "", "", "",
-	/*R0 - R7*/	"", "", "", "", "", "", "", "",
-	/*S0 - S7*/	"", "", "", "FP_ID_BTN_SCM_N", "", "", "", "",
-	/*T0 - T7*/	"", "", "", "", "", "", "", "",
-	/*U0 - U7*/	"", "", "", "", "", "", "", "",
-	/*V0 - V7*/	"", "", "", "", "", "SMI", "", "",
-	/*W0 - W7*/	"", "", "", "", "", "", "", "",
-	/*X0 - X7*/	"", "", "", "", "", "", "", "",
-	/*Y0 - Y7*/	"", "", "", "", "", "", "", "",
-	/*Z0 - Z7*/	"FM_BMC_READY_N", "", "", "", "", "", "", "",
-	/*AA0 - AA7*/	"", "", "", "", "", "", "", "",
-	/*AB0 - AB7*/	"", "", "", "", "", "", "", "",
-	/*AC0 - AC7*/	"", "", "", "", "", "", "", "";
-};
-
-&sgpiom0 {
-	status = "okay";
-	ngpios = <128>;
-	bus-frequency = <48000>;
-	gpio-line-names =
-	/* SGPIO input lines */
-	/*IOA0-IOA7*/	"","", "SIO_POWER_GOOD","OA1", "XDP_PRST_N","", "","", "FM_SLPS3_PLD_N","", "FM_SLPS4_PLD_N","", "FM_BIOS_POST_CMPLT_BMC_N","", "FM_ADR_TRIGGER_N","OA7",
-	/*IOB0-IOB7*/	"FM_ADR_COMPLETE","", "FM_PMBUS_ALERT_B_EN","", "PSU0_PRESENT_N","", "PSU1_PRESENT_N","", "PSU0_VIN_BUF_GOOD","", "PSU01_VIN_BUF_GOOD","", "PWRGD_PS0_PWROK_R","", "PWRGD_PS1_PWROK_R","",
-	/*IOC0-IOC7*/	"PWRGD_PS_PWROK_PLD_R","", "CHASSIS_INTRUSION","", "BMC_MFG_MODE","", "FM_BMC_EN_DET_R","", "FM_ME_BT_DONE","", "CPU1_PRESENCE","", "CPU2_PRESENCE","", "IRQ_PSYS_CRIT_N","",
-	/*IOD0-IOD7*/	"","", "CPU1_THERMTRIP","", "CPU2_THERMTRIP","", "CPU1_MEM_THERM_EVENT","", "CPU2_MEM_THERM_EVENT","", "CPU1_VRHOT","", "CPU2_VRHOT","", "","",
-	/*IOE0-IOE7*/	"","", "CPU1_MEM_VRHOT","", "CPU2_MEM_VRHOT","", "","", "PCH_BMC_THERMTRIP","", "","", "","", "","",
-	/*IOF0-IOF7*/	"CPU_ERR0","", "CPU_ERR1","", "CPU_ERR2","", "","", "","", "CPU_CATERR","", "","", "","",
-	/*IOG0-IOG7*/	"","", "","", "","", "","", "","", "","", "","", "","",
-	/*IOH0-IOH7*/	"","", "FP_ID_BTN_R1_N","", "FP_RST_BTN_N","", "","", "","", "FP_PWR_BTN_PLD_N_R","", "","", "","",
-	/*IOI0-IOI7*/	"","", "","", "","", "","", "","", "","", "","", "","",
-	/*IOJ0-IOJ7*/	"","", "","", "","", "","", "","", "","", "","", "","",
-	/*IOK0-IOK7*/	"","", "","", "","", "","", "","", "","", "","", "","",
-	/*IOL0-IOL7*/	"","", "","", "","", "","", "","", "","", "","", "","",
-	/*IOM0-IOM7*/	"","", "","", "","", "","", "","", "","", "","", "","",
-	/*ION0-ION7*/	"","BMC_SW_HEARTBEAT_N_R", "","FP_LED_FAULT_N", "","FP_ID_LED_N", "","FM_BMC_RSTBTN_OUT_N", "","FM_THERMTRIP_DLY_LVC1_R_N", "","", "","RST_PCA9548_SENSOR_PLD_N", "","USB_OC1_REAR_N",
-	/*IOO0-IOO7*/	"","IRQ_TPM_SPI_N", "","", "","IRQ_PCH_SCI_WHEA_R_N", "","IRQ_BMC_PCH_NMI_R", "","H_CPU_NMI_LVC1_R_N", "","", "","", "","FM_JTAG_BMC_PLD_MUX_SEL",
-	/*IOP0-IOP7*/	"IP0","OP0", "","", "","", "","", "","", "","", "","", "IP7","OP7";
-};
-
-&adc0 {
-	vref = <2500>;
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
-		&pinctrl_adc2_default &pinctrl_adc3_default
-		&pinctrl_adc4_default &pinctrl_adc5_default
-		&pinctrl_adc6_default &pinctrl_adc7_default>;
-};
-
-&adc1 {
-	vref = <2500>;
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
-		&pinctrl_adc10_default &pinctrl_adc11_default
-		&pinctrl_adc12_default &pinctrl_adc13_default
-		&pinctrl_adc14_default &pinctrl_adc15_default>;
-};
-
-&mdio2 {
-	status = "okay";
-
-	ethphy2: ethernet-phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&mac2 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy2>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii3_default>;
-};
-
-&mac3 {
-	status = "okay";
-
-	phy-mode = "rmii";
-	use-ncsi;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii4_default>;
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-64.dtsi"
-	};
-};
-
-&spi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
-		&pinctrl_spi2cs2_default>;
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "spi2:0";
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&kcs1 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xCA0>;
-};
-
-&kcs2 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xCA8>;
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xCA2>;
-};
-
-&emmc_controller {
-	status = "okay";
-};
-
-&emmc {
-	non-removable;
-	bus-width = <4>;
-	max-frequency = <100000000>;
-};
-
-&vhub {
-	status = "okay";
-};
-
-&lpc_snoop {
-	status = "okay";
-	snoop-ports = <0x80>;
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&uart_routing {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	U34_PWR_ADC@48 {
-		compatible = "ti,ads7830";
-		reg = <0x48>;
-	};
-
-	U35_PWR_ADC@4b {
-		compatible = "ti,ads7830";
-		reg = <0x4b>;
-	};
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		SMB_HOST_DB2000_3V3AUX_SCL: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		U12_PCA9546_CH1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		SMB_HOST_DB800_B_SCL: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		SMB_HOST_DB800_C_SCL: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	i2c-switch@59 {
-		compatible = "nxp,pca9848";
-		reg = <0x59>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		SMB_M2_P0_1V8AUX_SCL: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		SMB_M2_P1_1V8AUX_SCL: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		SMB_CPU_PIROM_3V3AUX_SCL: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		SMB_TEMP_3V3AUX_SCL: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			U163_tmp75@48 {
-				compatible = "ti,tmp75";
-				reg = <0x48>;
-			};
-			U114_tmp75@49 {
-				compatible = "ti,tmp75";
-				reg = <0x49>;
-			};
-		};
-
-		SMB_IPMB_3V3AUX_SSDSB_SCL: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			U4_tmp75@4c {
-				compatible = "ti,tmp75";
-				reg = <0x4c>;
-			};
-			U73_tmp75@4d {
-				compatible = "ti,tmp75";
-				reg = <0x4d>;
-			};
-		};
-
-		SMB_IPMB_3V3AUX_SCL: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			U190_fru@51 {
-				compatible = "atmel,24c128";
-				reg = <0x51>;
-				pagesize = <32>;
-			};
-		};
-
-		SMB_FB_SCL: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			i2c-switch@77 {
-				compatible = "nxp,pca9546";
-				reg = <0x77>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				i2c-mux-idle-disconnect;
-
-				SMB_IOEXP_SCL: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				SMB_PROGRAM_SCL: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				SMB_FB_SCL_CH2: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				SMB_FAN_SENSE_SCL: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-
-					Current_Meter_U2@45 {
-						compatible = "ti,ina219";
-						reg = <0x45>;
-						shunt-resistor = <1000>; /* = 1 mOhm */
-					};
-
-					Current_Meter_U3@44 {
-						compatible = "ti,ina219";
-						reg = <0x44>;
-						shunt-resistor = <1000>; /* = 1 mOhm */
-					};
-
-					TEMP_sensor_U2@4b {
-						compatible = "ti,tmp75";
-						reg = <0x4b>;
-					};
-				};
-			};
-		};
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	bus-frequency = <400000>;
-
-	ipmb@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-
-	/* MB FRU (U173) @ 0xA2 */
-	mb_fru: mb_fru@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-		pagesize = <32>;
-	};
-
-	/* FP_U1 Inlet */
-	FP_U1_tmp75@4a {
-		compatible = "ti,tmp75";
-		reg = <0x4a>;
-	};
-
-	FP_U4_fru@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-
-	i2c-switch@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-		i2c-mux-idle-disconnect;
-
-		U197_PCA9546_CH0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		U197_PCA9546_CH1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			cpu0_pvccin@60 {
-				compatible = "isil,raa229004";
-				reg = <0x60>;
-			};
-
-			cpu0_pvccinfaon@61 {
-				compatible = "isil,isl69260";
-				reg = <0x61>;
-			};
-
-			cpu0_pvccd_hv@63 {
-				compatible = "isil,isl69260";
-				reg = <0x63>;
-			};
-		};
-
-		U197_PCA9546_CH2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			cpu1_pvccin@72 {
-				compatible = "isil,raa229004";
-				reg = <0x72>;
-			};
-
-			cpu1_pvccinfaon@74 {
-				compatible = "isil,isl69260";
-				reg = <0x74>;
-			};
-
-			cpu1_pvccd_hv@76 {
-				compatible = "isil,isl69260";
-				reg = <0x76>;
-			};
-		};
-
-		U197_PCA9546_CH3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	i2c-switch@75 {
-		compatible = "nxp,pca9546";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x75>;
-		i2c-mux-idle-disconnect;
-
-		SMB_OCP_SFF_3V3AUX_SCL: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		SMB_OCP_LFF_3V3AUX_SCL: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-	};
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-&i2c14 {
-	status = "okay";
-
-	/* SCM FRU (U19) @ 0xA2 */
-	scm_fru: scm_fru@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-		pagesize = <32>;
-	};
-
-	scm_tmp75_u4@4a {
-		compatible = "ti,tmp75";
-		reg = <0x4a>;
-	};
-};
-
-&i2c15 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
deleted file mode 100644
index 50f3c6a5c0c8d..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2020 Super Micro Computer, Inc
-
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-
-/ {
-	model = "X11SPI BMC";
-	compatible = "supermicro,x11spi-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@7f000000 {
-			no-map;
-			reg = <0x7f000000 0x01000000>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
-			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
-			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
-	};
-
-};
-
-&gpio {
-    status = "okay";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-	};
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-    status = "okay";
-
-    pinctrl-names = "default";
-    pinctrl-0 = <&pinctrl_rmii1_default>;
-    clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-           <&syscon ASPEED_CLK_MAC1RCLK>;
-    clock-names = "MACCLK", "RCLK";
-    use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-			 &pinctrl_pwm2_default &pinctrl_pwm3_default
-			 &pinctrl_pwm4_default &pinctrl_pwm5_default
-			 &pinctrl_pwm6_default &pinctrl_pwm7_default>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
deleted file mode 100644
index aff27c1d4b06d..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
+++ /dev/null
@@ -1,528 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Tyan S7106 BMC";
-	compatible = "tyan,s7106-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		p2a_memory: region@987f0000 {
-			no-map;
-			reg = <0x987f0000 0x00010000>; /* 64KB */
-		};
-
-		vga_memory: framebuffer@9f000000 {
-			no-map;
-			reg = <0x9f000000 0x01000000>; /* 16M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>; /* 16M */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		identify {
-			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		heartbeat {
-			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
-			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
-			<&adc 12>, <&adc 13>, <&adc 14>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		label = "bmc";
-		status = "okay";
-		m25p,fast-read;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-	};
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default>;
-};
-
-&uart2 {
-	/* RS-232 connector on header */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-			&pinctrl_rxd2_default>;
-};
-
-&uart3 {
-	/* Alternative to vuart to internally connect (route) to uart1
-	 * when vuart cannot be used due to BIOS limitations.
-	 */
-	status = "okay";
-};
-
-&uart4 {
-	/* Alternative to vuart to internally connect (route) to the
-	 * external port usually used by uart1 when vuart cannot be
-	 * used due to BIOS limitations.
-	 */
-	status = "okay";
-};
-
-&uart5 {
-	/* BMC "debug" (console) UART; connected to RS-232 connector
-	 * on header; selectable via jumpers as alternative to uart2
-	 */
-	status = "okay";
-};
-
-&uart_routing {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-
-	/* We enable the VUART here, but leave it in a state that does
-	 * not interfere with the SuperIO. The goal is to have both the
-	 * VUART and the SuperIO available and decide at runtime whether
-	 * the VUART should actually be used. For that reason, configure
-	 * an "invalid" IO address and an IRQ that is not used by the
-	 * BMC.
-	 */
-
-	aspeed,lpc-io-reg = <0xffff>;
-	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&lpc_ctrl {
-	status = "okay";
-};
-
-&p2a {
-	status = "okay";
-	memory-region = <&p2a_memory>;
-};
-
-&lpc_snoop {
-	status = "okay";
-	snoop-ports = <0x80>;
-};
-
-&adc {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default
-			&pinctrl_pwm1_default
-			&pinctrl_pwm3_default
-			&pinctrl_pwm4_default>;
-
-	/* CPU fan #0 */
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	/* CPU fan #1 */
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	/* PWM group for chassis fans #1, #2, #3 and #4  */
-	fan@2 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	/* PWM group for chassis fans #5 and #6  */
-	fan@6 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	/* Hardware monitor with temperature sensors */
-	nct7802@28 {
-		compatible = "nuvoton,nct7802";
-		reg = <0x28>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@0 { /* LTD */
-			reg = <0>;
-		};
-
-		channel@1 { /* RTD1 */
-			reg = <1>;
-			sensor-type = "temperature";
-			temperature-mode = "thermistor";
-		};
-
-		channel@2 { /* RTD2 */
-			reg = <2>;
-			sensor-type = "temperature";
-			temperature-mode = "thermistor";
-		};
-
-		channel@3 { /* RTD3 */
-			reg = <3>;
-			sensor-type = "temperature";
-		};
-	};
-
-	/* Also connected to:
-	 * - IPMB pin header
-	 * - CPU #0 memory error LED @ 0x3A
-	 * - CPU #1 memory error LED @ 0x3C
-	 */
-};
-
-&i2c1 {
-	/* Directly connected to PCH SMBUS #0 */
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* BMC EEPROM, incl. mainboard FRU */
-	eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-
-	/* Also connected to:
-	 * - fan header
-	 * - mini-SAS HD connector
-	 * - SSATA SGPIO
-	 * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low)
-	 *   to PCH SMBUS #3
-	 */
-};
-
-&i2c3 {
-	status = "okay";
-
-	/* PSU1 FRU @ 0xA0 */
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-	};
-
-	/* PSU2 FRU @ 0xA2 */
-	eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-	};
-
-	/* PSU1 @ 0xB0 */
-	power-supply@58 {
-		compatible = "pmbus";
-		reg = <0x58>;
-	};
-
-	/* PSU2 @ 0xB2 */
-	power-supply@59 {
-		compatible = "pmbus";
-		reg = <0x59>;
-	};
-
-	/* Also connected to:
-	 * - PCH SMBUS #1
-	 */
-};
-
-&i2c4 {
-	status = "okay";
-
-	/* Connected to:
-	 * - PCH SMBUS #2
-	 */
-
-	/* Connected via switch to:
-	 * - CPU #0 channels ABC VDDQ @ 0x80
-	 * - CPU #0 channels DEF VDDQ @ 0x81
-	 * - CPU #1 channels ABC VDDQ @ 0x82
-	 * - CPU #1 channels DEF VDDQ @ 0x83
-	 * - CPU #0 VCCIO & VMCP @ 0x52
-	 * - CPU #1 VCCIO & VMCP @ 0x53
-	 * - CPU #0 VCCIN @ 0xC0
-	 * - CPU #0 VSA @ 0xC2
-	 * - CPU #1 VCCIN @ 0xC4
-	 * - CPU #1 VSA @ 0xC6
-	 * - J110
-	 */
-};
-
-&i2c5 {
-	status = "okay";
-
-	/* Connected via switch (PCH_BMC_SMB_SW_P) to:
-	 * - mainboard FRU @ 0xAE
-	 * - XDP connector
-	 * - ME debug header
-	 * - clock buffer @ 0xD8
-	 * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH)
-	 * - PCH SMBUS
-	 */
-};
-
-&i2c6 {
-	status = "okay";
-
-	/* Connected via switch (BMC_PE_SMB_EN_1_N) to
-	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
-	 * - 0,0: PCIE slot 1, SMB #1
-	 * - 0,1: PCIE slot 1, SMB #2
-	 * - 1,0: PCIE slot 2, SMB #1
-	 * - 1,1: PCIE slot 2, SMB #2
-	 */
-
-	/* Connected via switch (BMC_PE_SMB_EN_2_N) to
-	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
-	 * - 0,0: OCP0 (A) SMB
-	 * - 0,1: OCP0 (C) SMB
-	 * - 1,0: OCP1 (A) SMB
-	 * - 1,1: NC
-	 */
-};
-
-&i2c7 {
-	status = "okay";
-
-	/* Connected to:
-	 * - PCH SMBUS #4
-	 */
-};
-
-&i2c8 {
-	status = "okay";
-
-	/* Not connected */
-};
-
-&mac0 {
-	status = "okay";
-	use-ncsi;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-};
-
-&mac1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&kcs1 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca8>;
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-};
-
-/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-/* We're following the GPIO naming as defined at
- * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
- *
- * Notes on led-identify and id-button:
- * - A physical button is connected to id-button which
- *   triggers the clock on a D flip-flop. The /Q output of the
- *   flip-flop drives its D input.
- * - The flip-flop's Q output drives led-identify which is
- *   connected to LEDs.
- * - With that, every button press toggles the LED between on and off.
- *
- * Notes on power-, reset- and nmi- button and control:
- * - The -button signals can be used to monitor physical buttons.
- * - The -control signals can be used to actuate the specific
- *   operation.
- * - In hardware, the -button signals are connected to the -control
- *   signals through drivers with the -control signals being
- *   protected through diodes.
- */
-&gpio {
-	status = "okay";
-	gpio-line-names =
-	/*A0*/		"",
-	/*A1*/		"",
-	/*A2*/		"led-identify", /* in/out: BMC_IDLED_ON_N */
-	/*A3*/		"",
-	/*A4*/		"",
-	/*A5*/		"",
-	/*A6*/		"",
-	/*A7*/		"",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0*/		"",
-	/*C1*/		"",
-	/*C2*/		"",
-	/*C3*/		"",
-	/*C4*/		"id-button", /* in/out: BMC_IDBTN_IN_OUT_N */
-	/*C5*/		"post-complete", /* in: FM_BIOS_POST_CMPLT_N */
-	/*C6*/		"",
-	/*C7*/		"",
-	/*D0*/		"",
-	/*D1*/		"",
-	/*D2*/		"power-chassis-good", /* in: SYS_PWROK_BUF */
-	/*D3*/		"platform-reset", /* in: SYS_PLTRST_N */
-	/*D4*/		"",
-	/*D5*/		"",
-	/*D6*/		"",
-	/*D7*/		"",
-	/*E0*/		"power-button", /* in: BMC_PWBTN_IN_N */
-	/*E1*/		"power-chassis-control", /* out: BMC_PWRBTN_OUT_N */
-	/*E2*/		"reset-button", /* in: BMC_RSTBTN_IN_N */
-	/*E3*/		"reset-control", /* out: BMC_RSTBTN_OUT_N */
-	/*E4*/		"nmi-button", /* in: BMC_NMIBTN_IN_N */
-	/*E5*/		"nmi-control", /* out: BMC_NMIBTN_OUT_N */
-	/*E6*/		"",
-	/*E7*/		"led-heartbeat", /* out: BMC_HEARTBRAT_LED_N */
-	/*F0*/		"",
-	/*F1*/		"clear-cmos-control", /* out: BMC_CLR_CMOS_N */
-	/*F2*/		"",
-	/*F3*/		"",
-	/*F4*/		"led-fault", /* out: AST_HW_FAULT_N */
-	/*F5*/		"",
-	/*F6*/		"",
-	/*F7*/		"",
-	/*G0*/		"BMC_PE_SMB_EN_1_N", /* out */
-	/*G1*/		"BMC_PE_SMB_EN_2_N", /* out */
-	/*G2*/		"",
-	/*G3*/		"",
-	/*G4*/		"",
-	/*G5*/		"",
-	/*G6*/		"",
-	/*G7*/		"",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0*/		"",
-	/*Q1*/		"",
-	/*Q2*/		"",
-	/*Q3*/		"",
-	/*Q4*/		"BMC_PE_SMB_SW_BIT0", /* out */
-	/*Q5*/		"BMC_PE_SMB_SW_BIT1", /* out */
-	/*Q6*/		"",
-	/*Q7*/		"",
-	/*R0-R7*/	"","","","","","","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0*/		"",
-	/*AA1*/		"",
-	/*AA2*/		"",
-	/*AA3*/		"BMC_SMB3_PCH_IE_SML3_EN", /* out */
-	/*AA4*/		"",
-	/*AA5*/		"",
-	/*AA6*/		"",
-	/*AA7*/		"",
-	/*AB0-AB7*/	"","","","","","","","";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts
deleted file mode 100644
index f6c4549c0ac47..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts
+++ /dev/null
@@ -1,471 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Tyan S8036 BMC";
-	compatible = "tyan,s8036-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		p2a_memory: region@987f0000 {
-			no-map;
-			reg = <0x987f0000 0x00010000>; /* 64KB */
-		};
-
-		vga_memory: framebuffer@9f000000 {
-			no-map;
-			reg = <0x9f000000 0x01000000>; /* 16M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>; /* 16M */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		identify {
-			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		heartbeat {
-			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
-			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
-			<&adc 12>, <&adc 13>, <&adc 14>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		label = "bmc";
-		status = "okay";
-		m25p,fast-read;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-	};
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default>;
-};
-
-&uart2 {
-	/* RS-232 connector on header */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-			&pinctrl_rxd2_default>;
-};
-
-&uart3 {
-	/* Alternative to vuart to internally connect (route) to uart1
-	 * when vuart cannot be used due to BIOS limitations.
-	 */
-	status = "okay";
-};
-
-&uart4 {
-	/* Alternative to vuart to internally connect (route) to the
-	 * external port usually used by uart1 when vuart cannot be
-	 * used due to BIOS limitations.
-	 */
-	status = "okay";
-};
-
-&uart5 {
-	/* BMC "debug" (console) UART; connected to RS-232 connector
-	 * on header; selectable via jumpers as alternative to uart2
-	 */
-	status = "okay";
-};
-
-&uart_routing {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-
-	/* We enable the VUART here, but leave it in a state that does
-	 * not interfere with the SuperIO. The goal is to have both the
-	 * VUART and the SuperIO available and decide at runtime whether
-	 * the VUART should actually be used. For that reason, configure
-	 * an "invalid" IO address and an IRQ that is not used by the
-	 * BMC.
-	 */
-	aspeed,lpc-io-reg = <0xffff>;
-	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&lpc_ctrl {
-	status = "okay";
-};
-
-&p2a {
-	status = "okay";
-	memory-region = <&p2a_memory>;
-};
-
-&lpc_snoop {
-	status = "okay";
-	snoop-ports = <0x80>;
-};
-
-&adc {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default
-			&pinctrl_pwm1_default
-			&pinctrl_pwm3_default
-			&pinctrl_pwm4_default>;
-
-	/* CPU fan */
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	/* PWM group for chassis fans #1, #2, #3 and #4 */
-	fan@2 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	/* PWM group for chassis fans #5 and #6  */
-	fan@6 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-};
-
-&i2c0 {
-	/* Directly connected to Sideband-Temperature Sensor Interface (APML) */
-	status = "okay";
-};
-
-&i2c1 {
-	/* Directly connected to IPMB HDR. */
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* BMC EEPROM, incl. mainboard FRU */
-	eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-	/* Also connected to:
-	 * - BCM5720
-	 * - FPGA
-	 * - FAN HDR
-	 * - FPIO HDR
-	 */
-};
-
-&i2c3 {
-	status = "okay";
-
-	/* PSU1 FRU @ 0xA0 */
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-	};
-
-	/* PSU2 FRU @ 0xA2 */
-	eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-	};
-
-	/* PSU1 @ 0xB0 */
-	power-supply@58 {
-		compatible = "pmbus";
-		reg = <0x58>;
-	};
-
-	/* PSU2 @ 0xB2 */
-	power-supply@59 {
-		compatible = "pmbus";
-		reg = <0x59>;
-	};
-
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-	/* Hardware monitor with temperature sensors */
-	nct7802@28 {
-		compatible = "nuvoton,nct7802";
-		reg = <0x28>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@0 { /* LTD */
-			reg = <0>;
-			status = "okay";
-		};
-
-		channel@1 { /* RTD1 */
-			reg = <1>;
-			status = "okay";
-			sensor-type = "temperature";
-			temperature-mode = "thermistor";
-		};
-
-		channel@2 { /* RTD2 */
-			reg = <2>;
-			status = "okay";
-			sensor-type = "temperature";
-			temperature-mode = "thermistor";
-		};
-
-		channel@3 { /* RTD3 */
-			reg = <3>;
-			status = "okay";
-			sensor-type = "temperature";
-		};
-	};
-
-	/* Also connected to:
-	 * - PCA9544
-	 * - CLK BUFF
-	 * - OCP FRU
-	 */
-};
-
-&i2c6 {
-	status = "okay";
-	/* Connected to:
-	 * - PCA9548 @0xE0
-	 * - PCA9548 @0xE2
-	 * - PCA9544 @0xE4
-	 */
-};
-
-&i2c7 {
-	status = "okay";
-
-	/* Connected to:
-	 * - PCH SMBUS #4
-	 */
-};
-
-&i2c8 {
-	status = "okay";
-
-	/* Not connected */
-};
-
-&mac0 {
-	status = "okay";
-	use-ncsi;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-};
-
-&mac1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&kcs1 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca8>;
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-	aspeed,lpc-interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-/* We're following the GPIO naming as defined at
- * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
- *
- * Notes on led-identify and id-button:
- * - A physical button is connected to id-button which
- *   triggers the clock on a D flip-flop. The /Q output of the
- *   flip-flop drives its D input.
- * - The flip-flop's Q output drives led-identify which is
- *   connected to LEDs.
- * - With that, every button press toggles the LED between on and off.
- *
- * Notes on power-, reset- and nmi- button and control:
- * - The -button signals can be used to monitor physical buttons.
- * - The -control signals can be used to actuate the specific
- *   operation.
- * - In hardware, the -button signals are connected to the -control
- *   signals through drivers with the -control signals being
- *   protected through diodes.
- */
-&gpio {
-	status = "okay";
-	gpio-line-names =
-	/*A0*/		"",
-	/*A1*/		"",
-	/*A2*/		"led-identify", /* in/out: BMC_CHASSIS_ID_LED_L */
-	/*A3*/		"",
-	/*A4*/		"",
-	/*A5*/		"",
-	/*A6*/		"",
-	/*A7*/		"",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0*/		"",
-	/*D1*/		"",
-	/*D2*/		"power-chassis-good", /* in: PWR_GOOD_LED -- Check if this is Z3?*/
-	/*D3*/		"platform-reset", /* in: RESET_LED_L */
-	/*D4*/		"",
-	/*D5*/		"",
-	/*D6*/		"",
-	/*D7*/		"",
-	/*E0*/		"power-button", /* in: BMC_SYS_MON_PWR_BTN_L */
-	/*E1*/		"power-chassis-control", /* out: BMC_ASSERT_PWR_BTN */
-	/*E2*/		"reset-button", /* in: BMC_SYS_MOS_RST_BTN_L*/
-	/*E3*/		"reset-control", /* out: BMC_ASSERT_RST_BTN */
-	/*E4*/		"nmi-button", /* in: BMC_SYS_MON_NMI_BTN_L */
-	/*E5*/		"nmi-control", /* out: BMC_ASSERT_NMI_BTN */
-	/*E6*/		"TSI_RESERT",
-	/*E7*/		"led-heartbeat", /* out: BMC_GPIOE7 */
-	/*F0*/		"",
-	/*F1*/		"clear-cmos-control", /* out: BMC_ASSERT_CLR_CMOS_L */
-	/*F2*/		"",
-	/*F3*/		"",
-	/*F4*/		"led-fault", /* out: BMC_HWM_FAULT_LED_L */
-	/*F5*/		"BMC_SYS_FAULT_LED_L",
-	/*F6*/		"BMC_ASSERT_BIOS_WP_L",
-	/*F7*/		"",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0*/		"",
-	/*Q1*/		"",
-	/*Q2*/		"",
-	/*Q3*/		"",
-	/*Q4*/		"",
-	/*Q5*/		"",
-	/*Q6*/		"id-button", /* in: BMC_CHASSIS_ID_BTN_L */
-	/*Q7*/		"",
-	/*R0-R7*/	"","","","","","","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z2*/	"","","",
-	/*Z3*/		"post-complete", /* BMC_SYS_MON_PWROK */
-	/*Z4-Z7*/	"","","","",
-	/*AA0*/		"",
-	/*AA1*/		"",
-	/*AA2*/		"",
-	/*AA3*/		"",
-	/*AA4*/		"",
-	/*AA5*/		"",
-	/*AA6*/		"",
-	/*AA7*/		"BMC_ASSERT_BMC_READY",
-	/*AB0*/		"BMC_SPD_SEL",
-	/*AB1-AB7*/	"","","","","","","";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
deleted file mode 100644
index 7ab29129d1e4e..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
+++ /dev/null
@@ -1,360 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright (c) 2022 Ufispace Co., Ltd.
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Ufispace NCPLite BMC";
-	compatible = "ufispace,ncplite-bmc", "aspeed,ast2600";
-
-	aliases {
-		serial4 = &uart5;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200n8 earlycon";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
-			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
-			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
-			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		fan-status-int-l {
-			label = "fan-status-int-l";
-			gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(M, 2)>;
-		};
-
-		allpwr-good {
-			label = "allpwr-good";
-			gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
-			linux,code = <ASPEED_GPIO(V, 4)>;
-		};
-
-		psu0-alert-n {
-			label = "psu0-alert-n";
-			gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(V, 1)>;
-		};
-
-		psu1-alert-n {
-			label = "psu1-alert-n";
-			gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(V, 2)>;
-		};
-
-		int-thermal-alert {
-			label = "int-thermal-alert";
-			gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(P, 2)>;
-		};
-
-		cpu-caterr-l {
-			label = "cpu-caterr-l";
-			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(N, 3)>;
-		};
-
-		cpu-thermtrip-l {
-			label = "cpu-thermtrip-l";
-			gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(V, 5)>;
-		};
-
-		psu0-presence-l {
-			label = "psu0-presence-l";
-			gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 6)>;
-		};
-
-		psu1-presence-l {
-			label = "psu1-presence-l";
-			gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 7)>;
-		};
-
-		psu0-power-ok {
-			label = "psu0-power-ok";
-			gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>;
-			linux,code = <ASPEED_GPIO(M, 4)>;
-		};
-
-		psu1-power-ok {
-			label = "psu1-power-ok";
-			gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>;
-			linux,code = <ASPEED_GPIO(M, 5)>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <1000>;
-
-		fan0-presence {
-			label = "fan0-presence";
-			gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>;
-			linux,code = <2>;
-		};
-
-		fan1-presence {
-			label = "fan1-presence";
-			gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		fan2-presence {
-			label = "fan2-presence";
-			gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>;
-			linux,code = <10>;
-		};
-
-		fan3-presence {
-			label = "fan3-presence";
-			gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>;
-			linux,code = <14>;
-		};
-	};
-};
-
-&mac2 {
-	status = "okay";
-	use-ncsi;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii3_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
-		 <&syscon ASPEED_CLK_MAC3RCLK>;
-	clock-names = "MACCLK", "RCLK";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-64.dtsi"
-	};
-
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt-bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-64-alt.dtsi"
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-};
-
-&lpc_reset {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-};
-
-&uart_routing {
-	status = "okay";
-};
-
-&wdt1 {
-	status = "okay";
-};
-
-&wdt2 {
-	status = "okay";
-};
-
-&peci0 {
-	status = "okay";
-};
-
-&udc {
-	status = "okay";
-};
-
-&adc0 {
-	vref = <2500>;
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
-		&pinctrl_adc2_default &pinctrl_adc3_default
-		&pinctrl_adc4_default &pinctrl_adc5_default
-		&pinctrl_adc6_default &pinctrl_adc7_default>;
-};
-
-&adc1 {
-	vref = <2500>;
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
-		&pinctrl_adc10_default &pinctrl_adc11_default
-		&pinctrl_adc12_default &pinctrl_adc13_default
-		&pinctrl_adc14_default &pinctrl_adc15_default>;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	lm75@48 {
-		compatible = "national,lm75";
-		reg = <0x48>;
-	};
-
-	lm75@49 {
-		compatible = "national,lm75";
-		reg = <0x49>;
-	};
-
-	lm86@4c {
-		compatible = "national,lm86";
-		reg = <0x4c>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-
-	lm75@4f {
-		cpmpatible = "national,lm75";
-		reg = <0x4f>;
-	};
-
-	fan_ioexp: pca9535@20 {
-		compatible = "nxp,pca9535";
-		reg = <0x20>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"","","presence-fan0","",
-		"","","presence-fan1","",
-		"","","presence-fan2","",
-		"","","presence-fan3","";
-	};
-};
-
-&i2c3 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <64>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	psu@58 {
-		compatible = "pmbus";
-		reg = <0x58>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <1>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	psu@58 {
-		compatible = "pmbus";
-		reg = <0x58>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <1>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-
-	lm75@4d {
-		compatible = "national,lm75";
-		reg = <0x4d>;
-	};
-};
-
-&gpio0 {
-	status = "okay";
-
-	gpio-line-names =
-	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"CPU_PWRGD","","","power-button","host0-ready","","presence-ps0","presence-ps1",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","","","","reset-button","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"power-chassis-control0","power-chassis-control1","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","","","","","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","power-chassis-good","","","";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts b/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts
deleted file mode 100644
index 24319267d5508..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (C) 2021 YADRO
-/dts-v1/;
-
-#include "aspeed-bmc-vegman.dtsi"
-
-/ {
-	model = "YADRO VEGMAN N110 BMC";
-	compatible = "yadro,vegman-n110-bmc", "aspeed,ast2500";
-};
-
-&gpio {
-	status = "okay";
-	gpio-line-names =
-	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
-	/*F0-F7*/	"NMI_OUT","PCIE_NIC_ALERT","","","SKT0_FAULT_LED","","RST_RGMII_PHYRST_DNP","",
-	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
-	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
-	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
-	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
-	/*AA0-AA7*/	"","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
-	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-&sgpio {
-	ngpios = <80>;
-	bus-frequency = <2000000>;
-	status = "okay";
-	/* SGPIO lines. even: input, odd: output */
-	gpio-line-names =
-	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
-	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
-	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
-	/*D0-D7*/	"","","","","","","","","","","","","","","","",
-	/*E0-E7*/	"","","","","","","","","","","","","","","","",
-	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
-	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
-	/*H0-H7*/	"","","","","","","","","","","","","","","","",
-	/*I0-I7*/	"","","","","","","","","","","","","","","","",
-	/*J0-J7*/	"","","","","","","","","","","","","","","","";
-};
-
-&i2c11 {
-	/* SMB_BMC_MGMT_LVC3 */
-	gpio@21 {
-		compatible = "nxp,pcal9535";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names =
-		/*IO0.0-0.7*/	"", "", "", "", "", "", "PE_PCH_SCR_CLKREQ", "",
-		/*IO1.0-1.7*/	"", "PE_PCH_MEZ_PRSNT", "PE_PCH_MEZ_PRSNT_", "NIC_4_PE_PRSNT", "NIC_3_PE_PRSNT", "NIC_2_PE_PRSNT", "NIC_1_PE_PRSNT", "";
-	};
-	gpio@27 {
-		compatible = "nxp,pca9698";
-		reg = <0x27>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names =
-		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
-		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
-		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "", "", "",
-		/*IO3.0-3.7*/	"", "", "", "", "", "", "", "",
-		/*IO4.0-4.7*/	"", "", "", "", "", "", "", "";
-	};
-};
-
-&i2c13 {
-	/* SMB_PCIE2_STBY_LVC3 */
-	mux-expa@73 {
-		compatible = "nxp,pca9545";
-		reg = <0x73>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-	};
-	mux-sata@71 {
-		compatible = "nxp,pca9543";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-	};
-};
-
-&i2c2 {
-	/* SMB_PCIE_STBY_LVC3 */
-	mux-expb@71 {
-		compatible = "nxp,pca9545";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-			 &pinctrl_pwm2_default &pinctrl_pwm3_default
-			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x06>;
-	};
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
-	};
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
-	};
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
-	};
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
-	};
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts b/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts
deleted file mode 100644
index ebbb68b55559a..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts
+++ /dev/null
@@ -1,255 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (C) 2021 YADRO
-/dts-v1/;
-
-#include "aspeed-bmc-vegman.dtsi"
-
-/ {
-	model = "YADRO VEGMAN Rx20 BMC";
-	compatible = "yadro,vegman-rx20-bmc", "aspeed,ast2500";
-
-	leds {
-		compatible = "gpio-leds";
-
-		temp_alarm {
-			label = "temp:red:status";
-			default-state = "off";
-			gpios = <&gpio ASPEED_GPIO(E, 4) GPIO_ACTIVE_LOW>;
-		};
-
-		temp_ok {
-			label = "temp:green:status";
-			default-state = "off";
-			gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
-		};
-
-		psu_fault {
-			label = "psu:red:status";
-			default-state = "off";
-			gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_LOW>;
-		};
-
-		psu_ok {
-			label = "psu:green:status";
-			default-state = "off";
-			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&gpio {
-	status = "okay";
-	gpio-line-names =
-	/*A0-A7*/	"CASE_OPEN_DNP","CASE_OPEN_FAULT_RST_DNP","BEZEL_ON_PWR_P3V3","PWM_PWRGD_EXP_EN","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","LED_TEMP_STATUS_R","LED_TEMP_STATUS_G","LED_PWR_STATUS_R","LED_PWR_STATUS_G",
-	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED_DNP","SKT1_FAULT_LED_DNP","RST_RGMII_PHYRST_DNP","",
-	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","SPI_BMC_BOOT_HD","IRQ_NMI_EVENT","SPI_BMC_BOOT_WP","SPI_BMC_BOOT_WP1","",
-	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"SEL_FLASH_SOFT","STATUS_SEL_BMC","","","BMC_WDT_P","ID_BUTTON","PS_PWROK","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","SPI_BIOS_ACTIVE_FLASH_SEL","STATUS_SEL_BIOS",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"_SPI_BMC_BOOT_CS1","","","","","","","",
-	/*S0-S7*/	"_SPI2_BMC_CS1","RSR_A_SMBEXP_RST_INT","RSR_B_SMBEXP_RST_INT","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
-	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
-	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
-	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","BMC_WDT_RST1","BMC_WDT_RST2","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-&sgpio {
-	ngpios = <80>;
-	bus-frequency = <2000000>;
-	status = "okay";
-	/* SGPIO lines. even: input, odd: output */
-	gpio-line-names =
-	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
-	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
-	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
-	/*D0-D7*/	"","","","","","","","","","","","","","","","",
-	/*E0-E7*/	"","","","","","","","","","","","","","","","",
-	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
-	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
-	/*H0-H7*/	"","","","","","","","","","","","","","","","",
-	/*I0-I7*/	"","","","","","","","","","","","","","","","",
-	/*J0-J7*/	"","","","","","","","","","","","","","","","";
-};
-
-&i2c11 {
-	/* SMB_BMC_MGMT_LVC3 */
-	gpio@21 {
-		compatible = "nxp,pcal9535";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names =
-		/*IO0.0-0.7*/	"ETH3_CLK_REQ", "ETH2_CLK_REQ", "RSR_A_PCIE_X16_2_PRSNT", "RSR_B_PCIE_X16_2_PRSNT", "", "RSR_B_PCIE_X8_3_PRSNT", "RSR_B_PCIE_X8_4_PRSNT", "RSR_B_PCIE_X16_PRSNT_N",
-		/*IO1.0-1.7*/	"RSR_B_PCIE_X8_2_PRSNT", "RSR_B_PCIE_X8_1_PRSNT", "NIC_1_PE_BUF_PRSNT", "RSR_A_PCIE_X16_PRSNT", "RSR_A_PCIE_X8_3_PRSNT", "RSR_A_PCIE_X8_2_PRSNT", "RSR_A_PCIE_X8_1_PRSNT_N", "";
-	};
-	gpio@23 {
-		compatible = "nxp,pcal9535";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names =
-		/*IO0.0-0.7*/	"FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "", "", "",
-		/*IO1.0-1.7*/	"", "", "", "", "", "", "", "";
-	};
-	gpio@27 {
-		compatible = "nxp,pca9698";
-		reg = <0x27>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names =
-		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
-		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
-		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
-		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
-		/*IO4.0-4.7*/	"PCH_PWR_RESET_N", "FM_BOARD_SKU_ID0", "FM_BOARD_SKU_ID1", "FM_BOARD_SKU_ID2", "FM_BOARD_SKU_ID3", "FM_BOARD_SKU_ID4", "FM_BOARD_REV_ID0", "FM_BOARD_REV_ID1";
-	};
-	gpio@39 {
-		compatible = "nxp,pca9554";
-		reg = <0x39>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names =
-		/*IO0.0-0.7*/	"FAN_FAULT_0", "FAN_FAULT_1", "FAN_FAULT_2", "FAN_FAULT_3", "FAN_FAULT_4", "FAN_FAULT_5", "FAN_FAULT_6", "";
-	};
-};
-
-&i2c13 {
-	/* SMB_PCIE2_STBY_LVC3 */
-	mux-expa@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			rsra-mux@72 {
-				compatible = "nxp,pca9548";
-				reg = <0x72>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-					at24@50 {
-						compatible = "atmel,24c64";
-						reg = <0x50>;
-						pagesize = <32>;
-						size = <8192>;
-						address-width = <16>;
-					};
-				};
-			};
-		};
-	};
-	mux-sata@71 {
-		compatible = "nxp,pca9543";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-	};
-};
-
-&i2c2 {
-	/* SMB_PCIE_STBY_LVC3 */
-	mux-expb@71 {
-		compatible = "nxp,pca9548";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			rsrb-mux@72 {
-				compatible = "nxp,pca9548";
-				reg = <0x72>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-					at24@50 {
-						compatible = "atmel,24c64";
-						reg = <0x50>;
-						pagesize = <32>;
-						size = <8192>;
-						address-width = <16>;
-					};
-				};
-			};
-			at24@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-				pagesize = <32>;
-				size = <8192>;
-				address-width = <16>;
-			};
-		};
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-			 &pinctrl_pwm2_default &pinctrl_pwm3_default
-			 &pinctrl_pwm4_default &pinctrl_pwm5_default
-			 &pinctrl_pwm6_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x07>;
-	};
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
-	};
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
-	};
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
-	};
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
-	};
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0C>;
-	};
-	fan@6 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0D>;
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts b/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts
deleted file mode 100644
index e36ee4704994b..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (C) 2021 YADRO
-/dts-v1/;
-
-#include "aspeed-bmc-vegman.dtsi"
-
-/ {
-	model = "YADRO VEGMAN Sx20 BMC";
-	compatible = "yadro,vegman-sx20-bmc", "aspeed,ast2500";
-};
-
-&gpio {
-	status = "okay";
-	gpio-line-names =
-	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
-	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED","SKT1_FAULT_LED","RST_RGMII_PHYRST_DNP","",
-	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
-	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","BMC_GPU_RISER_ID1","BMC_GPU_RISER_ID0","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
-	/*P0-P7*/	"","P12V_HDDS_A_EN","P12V_HDDS_B_EN","P5V_HDDS_A_EN","PWRGD_P5V_HDDS_A","P5V_HDDS_B_EN","PWRGD_P5V_HDDS_B","",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
-	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
-	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
-	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
-	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-&sgpio {
-	ngpios = <80>;
-	bus-frequency = <2000000>;
-	status = "okay";
-	/* SGPIO lines. even: input, odd: output */
-	gpio-line-names =
-	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
-	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
-	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
-	/*D0-D7*/	"","","","","","","","","","","","","","","","",
-	/*E0-E7*/	"","","","","","","","","","","","","","","","",
-	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
-	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
-	/*H0-H7*/	"","","","","","","","","","","","","","","","",
-	/*I0-I7*/	"","","","","","","","","","","","","","","","",
-	/*J0-J7*/	"","","","","","","","","","","","","","","","";
-};
-
-&i2c11 {
-	/* SMB_BMC_MGMT_LVC3 */
-	gpio@21 {
-		compatible = "nxp,pcal9535";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names =
-		/*IO0.0-0.7*/	"", "", "CPU1_PE3_0_SLOT_PRSNT", "", "CPU1_PE1_GPU_PRSNT", "CPU1_PE3_1_SLOT_PRSNT", "PE_PCH_MEZ_PRSNT", "CPU0_PE3_1_SLOT_PRSNT",
-		/*IO1.0-1.7*/	"CPU0_PE1_GPU_PRSNT", "CPU0_PE2_NVME2_PRSNT", "CPU1_PE2_NVME3_PRSNT", "CPU1_PE2_SLOT_PRSNT", "CPU1_PE2_NVME4_PRSNT", "", "CPU0_PE2_NVME1_PRSNT", "CPU0_PE3_0_RAID_PRSNT";
-	};
-	gpio@27 {
-		compatible = "nxp,pca9698";
-		reg = <0x27>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names =
-		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
-		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
-		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
-		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
-		/*IO4.0-4.7*/	"PWRGD_P5V_HDDS_A_R", "PWRGD_P5V_HDDS_B_R", "", "", "", "", "", "";
-	};
-};
-
-&i2c13 {
-	/* SMB_PCIE2_STBY_LVC3 */
-	mux-expa@73 {
-		compatible = "nxp,pca9545";
-		reg = <0x73>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-	};
-	mux-sata@71 {
-		compatible = "nxp,pca9543";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-	};
-};
-
-&i2c2 {
-	/* SMB_PCIE_STBY_LVC3 */
-	mux-expb@71 {
-		compatible = "nxp,pca9545";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-			 &pinctrl_pwm2_default &pinctrl_pwm3_default
-			 &pinctrl_pwm4_default &pinctrl_pwm5_default
-			 &pinctrl_pwm6_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-	fan@6 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi
deleted file mode 100644
index 1a5b25b2ea295..0000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi
+++ /dev/null
@@ -1,311 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (C) 2021 YADRO
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	aliases {
-		serial4 = &uart5;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;	/* 32M */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		ramoops@9eff0000{
-			compatible = "ramoops";
-			reg = <0x9eff0000 0x10000>;
-			record-size = <0x2000>;
-			console-size = <0x2000>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
-			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
-			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		identify {
-			label = "platform:blue:indicator";
-			linux,default-trigger = "heartbeat";
-			gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
-		};
-
-		status_amber {
-			label = "platform:red:status";
-			default-state = "off";
-			gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
-		};
-
-		status_green {
-			label = "platform:green:status";
-			default-state = "off";
-			gpios = <&gpio ASPEED_GPIO(S, 4) GPIO_ACTIVE_LOW>;
-		};
-
-		power_fault {
-			label = "platform:red:power";
-			default-state = "off";
-			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
-		};
-
-		power_ok {
-			label = "platform:green:power";
-			default-state = "off";
-			gpios = <&gpio ASPEED_GPIO(AA, 5) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	beeper {
-		compatible = "pwm-beeper";
-		pwms = <&timer 5 1000000 0>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-#include "openbmc-flash-layout-64.dtsi"
-	};
-};
-
-&spi2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2ck_default
-			&pinctrl_spi2miso_default
-			&pinctrl_spi2mosi_default
-			&pinctrl_spi2cs0_default>;
-	flash@0 {
-		status = "okay";
-		label = "bios";
-		m25p,fast-read;
-	};
-};
-
-&mac0 {
-	status = "okay";
-	use-ncsi;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-
-	phy-mode = "rgmii";
-	phy-handle = <&phy>;
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy: ethernet-phy@1 {
-			/* KSZ9131 */
-			compatible = "ethernet-phy-id0022.1640";
-			reg = <1>;
-
-			micrel,led-mode = <0>;
-		};
-	};
-};
-
-&vhub {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&sdmmc {
-	status = "okay";
-};
-
-&sdhci1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sd2_default>;
-	disable-wp;
-};
-
-&timer {
-	fttmr010,pwm-outputs = <5>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_timer5_default>;
-	#pwm-cells = <3>;
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&kcs3 {
-	aspeed,lpc-io-reg = <0xCA2>;
-	status = "okay";
-};
-
-&kcs4 {
-	aspeed,lpc-io-reg = <0xCA4>;
-	status = "okay";
-};
-
-&lpc_snoop {
-	snoop-ports = <0x80>;
-	status = "okay";
-};
-
-&uart_routing {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <>;
-};
-
-&i2c0 {
-	/* SMB_IPMB_STBY_LVC3 */
-	multi-master;
-	status = "okay";
-};
-
-&i2c1 {
-	/* SMB_CHASSENSOR_STBY_LVC3 */
-	status = "okay";
-};
-
-&i2c2 {
-	/* SMB_PCIE_STBY_LVC3 */
-	status = "okay";
-};
-
-&i2c3 {
-	/* SMB_HOST_STBY_LVC3 */
-	multi-master;
-	status = "okay";
-};
-
-&i2c4 {
-	/* BMC_PMBUS2_STBY */
-	status = "okay";
-};
-
-&i2c5 {
-	/* SMB_SMLINK0_STBY_LVC3 */
-	bus-frequency = <1000000>;
-	multi-master;
-	status = "okay";
-};
-
-&i2c6 {
-	/* SMB_TEMPSENSOR_STBY_LVC3 */
-	multi-master;
-	status = "okay";
-};
-
-&i2c7 {
-	/* SMB_SM_PMB1_SML1_STBY_LVC3 */
-	multi-master;
-	status = "okay";
-};
-
-&i2c9 {
-	/* SMB_BMC_ETH3_LVC3 */
-	status = "okay";
-};
-
-&i2c10 {
-	/* SMB_BMC_ETH2_LVC3 */
-	status = "okay";
-};
-
-&i2c11 {
-	/* SMB_BMC_MGMT_LVC3 */
-	status = "okay";
-
-	at24@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-		size = <8192>;
-		address-width = <16>;
-	};
-};
-
-&i2c12 {
-	/* SMB_BMC_FAULT_EXP_LVC3 */
-	status = "okay";
-};
-
-&i2c13 {
-	/* SMB_PCIE2_STBY_LVC3 */
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
deleted file mode 100644
index 530491ae5eb26..0000000000000
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ /dev/null
@@ -1,1453 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-#include <dt-bindings/clock/aspeed-clock.h>
-
-/ {
-	model = "Aspeed BMC";
-	compatible = "aspeed,ast2400";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&vic>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		i2c8 = &i2c8;
-		i2c9 = &i2c9;
-		i2c10 = &i2c10;
-		i2c11 = &i2c11;
-		i2c12 = &i2c12;
-		i2c13 = &i2c13;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &vuart;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		fmc: spi@1e620000 {
-			reg = <0x1e620000 0x94>, <0x20000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "aspeed,ast2400-fmc";
-			clocks = <&syscon ASPEED_CLK_AHB>;
-			status = "disabled";
-			interrupts = <19>;
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				spi-rx-bus-width = <2>;
-				spi-max-frequency = <50000000>;
-				status = "disabled";
-			};
-			flash@1 {
-				reg = < 1 >;
-				compatible = "jedec,spi-nor";
-				spi-rx-bus-width = <2>;
-				spi-max-frequency = <50000000>;
-				status = "disabled";
-			};
-			flash@2 {
-				reg = < 2 >;
-				compatible = "jedec,spi-nor";
-				spi-rx-bus-width = <2>;
-				spi-max-frequency = <50000000>;
-				status = "disabled";
-			};
-			flash@3 {
-				reg = < 3 >;
-				compatible = "jedec,spi-nor";
-				spi-rx-bus-width = <2>;
-				spi-max-frequency = <50000000>;
-				status = "disabled";
-			};
-			flash@4 {
-				reg = < 4 >;
-				compatible = "jedec,spi-nor";
-				spi-rx-bus-width = <2>;
-				spi-max-frequency = <50000000>;
-				status = "disabled";
-			};
-		};
-
-		spi: spi@1e630000 {
-			reg = <0x1e630000 0x18>, <0x30000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "aspeed,ast2400-spi";
-			clocks = <&syscon ASPEED_CLK_AHB>;
-			status = "disabled";
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-		};
-
-		vic: interrupt-controller@1e6c0080 {
-			compatible = "aspeed,ast2400-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			valid-sources = <0xffffffff 0x0007ffff>;
-			reg = <0x1e6c0080 0x80>;
-		};
-
-		cvic: copro-interrupt-controller@1e6c2000 {
-			compatible = "aspeed,ast2400-cvic", "aspeed-cvic";
-			valid-sources = <0x7fffffff>;
-			reg = <0x1e6c2000 0x80>;
-		};
-
-		mac0: ethernet@1e660000 {
-			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
-			reg = <0x1e660000 0x180>;
-			interrupts = <2>;
-			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
-			status = "disabled";
-		};
-
-		mac1: ethernet@1e680000 {
-			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
-			reg = <0x1e680000 0x180>;
-			interrupts = <3>;
-			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
-			status = "disabled";
-		};
-
-		ehci0: usb@1e6a1000 {
-			compatible = "aspeed,ast2400-ehci", "generic-ehci";
-			reg = <0x1e6a1000 0x100>;
-			interrupts = <5>;
-			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2h_default>;
-			status = "disabled";
-		};
-
-		uhci: usb@1e6b0000 {
-			compatible = "aspeed,ast2400-uhci", "generic-uhci";
-			reg = <0x1e6b0000 0x100>;
-			interrupts = <14>;
-			#ports = <3>;
-			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
-			status = "disabled";
-			/*
-			 * No default pinmux, it will follow EHCI, use an explicit pinmux
-			 * override if you don't enable EHCI
-			 */
-		};
-
-		vhub: usb-vhub@1e6a0000 {
-			compatible = "aspeed,ast2400-usb-vhub";
-			reg = <0x1e6a0000 0x300>;
-			interrupts = <5>;
-			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
-			aspeed,vhub-downstream-ports = <5>;
-			aspeed,vhub-generic-endpoints = <15>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2d_default>;
-			status = "disabled";
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon: syscon@1e6e2000 {
-				compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
-				reg = <0x1e6e2000 0x1a8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1e6e2000 0x1000>;
-				#clock-cells = <1>;
-				#reset-cells = <1>;
-
-				p2a: p2a-control@2c {
-					reg = <0x2c 0x4>;
-					compatible = "aspeed,ast2400-p2a-ctrl";
-					status = "disabled";
-				};
-
-				silicon-id@7c {
-					compatible = "aspeed,ast2400-silicon-id", "aspeed,silicon-id";
-					reg = <0x7c 0x4>;
-				};
-
-				pinctrl: pinctrl@80 {
-					reg = <0x80 0x18>, <0xa0 0x10>;
-					compatible = "aspeed,ast2400-pinctrl";
-				};
-			};
-
-			rng: hwrng@1e6e2078 {
-				compatible = "timeriomem_rng";
-				reg = <0x1e6e2078 0x4>;
-				period = <1>;
-				quality = <100>;
-			};
-
-			adc: adc@1e6e9000 {
-				compatible = "aspeed,ast2400-adc";
-				reg = <0x1e6e9000 0xb0>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-				resets = <&syscon ASPEED_RESET_ADC>;
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-
-			sram: sram@1e720000 {
-				compatible = "mmio-sram";
-				reg = <0x1e720000 0x8000>;	// 32K
-			};
-
-			video: video@1e700000 {
-				compatible = "aspeed,ast2400-video-engine";
-				reg = <0x1e700000 0x1000>;
-				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
-					 <&syscon ASPEED_CLK_GATE_ECLK>;
-				clock-names = "vclk", "eclk";
-				interrupts = <7>;
-				status = "disabled";
-			};
-
-			sdmmc: sd-controller@1e740000 {
-				compatible = "aspeed,ast2400-sd-controller";
-				reg = <0x1e740000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1e740000 0x10000>;
-				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
-				status = "disabled";
-
-				sdhci0: sdhci@100 {
-					compatible = "aspeed,ast2400-sdhci";
-					reg = <0x100 0x100>;
-					interrupts = <26>;
-					sdhci,auto-cmd12;
-					clocks = <&syscon ASPEED_CLK_SDIO>;
-					status = "disabled";
-				};
-
-				sdhci1: sdhci@200 {
-					compatible = "aspeed,ast2400-sdhci";
-					reg = <0x200 0x100>;
-					interrupts = <26>;
-					sdhci,auto-cmd12;
-					clocks = <&syscon ASPEED_CLK_SDIO>;
-					status = "disabled";
-				};
-			};
-
-			gpio: gpio@1e780000 {
-				#gpio-cells = <2>;
-				gpio-controller;
-				compatible = "aspeed,ast2400-gpio";
-				reg = <0x1e780000 0x1000>;
-				interrupts = <20>;
-				gpio-ranges = <&pinctrl 0 0 220>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			timer: timer@1e782000 {
-				/* This timer is a Faraday FTTMR010 derivative */
-				compatible = "aspeed,ast2400-timer";
-				reg = <0x1e782000 0x90>;
-				interrupts = <16 17 18 35 36 37 38 39>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-				clock-names = "PCLK";
-			};
-
-			rtc: rtc@1e781000 {
-				compatible = "aspeed,ast2400-rtc";
-				reg = <0x1e781000 0x18>;
-				status = "disabled";
-			};
-
-			uart1: serial@1e783000 {
-				compatible = "ns16550a";
-				reg = <0x1e783000 0x20>;
-				reg-shift = <2>;
-				interrupts = <9>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
-				resets = <&lpc_reset 4>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart5: serial@1e784000 {
-				compatible = "ns16550a";
-				reg = <0x1e784000 0x20>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			wdt1: watchdog@1e785000 {
-				compatible = "aspeed,ast2400-wdt";
-				reg = <0x1e785000 0x1c>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-			};
-
-			wdt2: watchdog@1e785020 {
-				compatible = "aspeed,ast2400-wdt";
-				reg = <0x1e785020 0x1c>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-			};
-
-			pwm_tacho: pwm-tacho-controller@1e786000 {
-				compatible = "aspeed,ast2400-pwm-tacho";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x1e786000 0x1000>;
-				clocks = <&syscon ASPEED_CLK_24M>;
-				resets = <&syscon ASPEED_RESET_PWM>;
-				status = "disabled";
-			};
-
-			vuart: serial@1e787000 {
-				compatible = "aspeed,ast2400-vuart";
-				reg = <0x1e787000 0x40>;
-				reg-shift = <2>;
-				interrupts = <8>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
-				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
-
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x1e789000 0x1000>;
-
-				lpc_ctrl: lpc-ctrl@80 {
-					compatible = "aspeed,ast2400-lpc-ctrl";
-					reg = <0x80 0x10>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				lpc_snoop: lpc-snoop@90 {
-					compatible = "aspeed,ast2400-lpc-snoop";
-					reg = <0x90 0x8>;
-					interrupts = <8>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				lhc: lhc@a0 {
-					compatible = "aspeed,ast2400-lhc";
-					reg = <0xa0 0x24 0xc8 0x8>;
-				};
-
-				lpc_reset: reset-controller@98 {
-					compatible = "aspeed,ast2400-lpc-reset";
-					reg = <0x98 0x4>;
-					#reset-cells = <1>;
-				};
-
-				ibt: ibt@140 {
-					compatible = "aspeed,ast2400-ibt-bmc";
-					reg = <0x140 0x18>;
-					interrupts = <8>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				uart_routing: uart-routing@9c {
-					compatible = "aspeed,ast2400-uart-routing";
-					reg = <0x9c 0x4>;
-					status = "disabled";
-				};
-			};
-
-			peci0: peci-controller@1e78b000 {
-				compatible = "aspeed,ast2400-peci";
-				reg = <0x1e78b000 0x60>;
-				interrupts = <15>;
-				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
-				resets = <&syscon ASPEED_RESET_PECI>;
-				cmd-timeout-ms = <1000>;
-				clock-frequency = <1000000>;
-				status = "disabled";
-			};
-
-			uart2: serial@1e78d000 {
-				compatible = "ns16550a";
-				reg = <0x1e78d000 0x20>;
-				reg-shift = <2>;
-				interrupts = <32>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
-				resets = <&lpc_reset 5>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart3: serial@1e78e000 {
-				compatible = "ns16550a";
-				reg = <0x1e78e000 0x20>;
-				reg-shift = <2>;
-				interrupts = <33>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
-				resets = <&lpc_reset 6>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart4: serial@1e78f000 {
-				compatible = "ns16550a";
-				reg = <0x1e78f000 0x20>;
-				reg-shift = <2>;
-				interrupts = <34>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
-				resets = <&lpc_reset 7>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			i2c: bus@1e78a000 {
-				compatible = "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1e78a000 0x1000>;
-			};
-		};
-	};
-};
-
-&i2c {
-	i2c_ic: interrupt-controller@0 {
-		#interrupt-cells = <1>;
-		compatible = "aspeed,ast2400-i2c-ic";
-		reg = <0x0 0x40>;
-		interrupts = <12>;
-		interrupt-controller;
-	};
-
-	i2c0: i2c-bus@40 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x40 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <0>;
-		interrupt-parent = <&i2c_ic>;
-		status = "disabled";
-		/* Does not need pinctrl properties */
-	};
-
-	i2c1: i2c-bus@80 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x80 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <1>;
-		interrupt-parent = <&i2c_ic>;
-		status = "disabled";
-		/* Does not need pinctrl properties */
-	};
-
-	i2c2: i2c-bus@c0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0xc0 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <2>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3_default>;
-		status = "disabled";
-	};
-
-	i2c3: i2c-bus@100 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x100 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <3>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c4_default>;
-		status = "disabled";
-	};
-
-	i2c4: i2c-bus@140 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x140 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <4>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c5_default>;
-		status = "disabled";
-	};
-
-	i2c5: i2c-bus@180 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x180 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <5>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c6_default>;
-		status = "disabled";
-	};
-
-	i2c6: i2c-bus@1c0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x1c0 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <6>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c7_default>;
-		status = "disabled";
-	};
-
-	i2c7: i2c-bus@300 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x300 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <7>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c8_default>;
-		status = "disabled";
-	};
-
-	i2c8: i2c-bus@340 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x340 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <8>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c9_default>;
-		status = "disabled";
-	};
-
-	i2c9: i2c-bus@380 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x380 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <9>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c10_default>;
-		status = "disabled";
-	};
-
-	i2c10: i2c-bus@3c0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x3c0 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <10>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c11_default>;
-		status = "disabled";
-	};
-
-	i2c11: i2c-bus@400 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x400 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <11>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c12_default>;
-		status = "disabled";
-	};
-
-	i2c12: i2c-bus@440 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x440 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <12>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c13_default>;
-		status = "disabled";
-	};
-
-	i2c13: i2c-bus@480 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x480 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <13>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c14_default>;
-		status = "disabled";
-	};
-};
-
-&pinctrl {
-	pinctrl_acpi_default: acpi_default {
-		function = "ACPI";
-		groups = "ACPI";
-	};
-
-	pinctrl_adc0_default: adc0_default {
-		function = "ADC0";
-		groups = "ADC0";
-	};
-
-	pinctrl_adc1_default: adc1_default {
-		function = "ADC1";
-		groups = "ADC1";
-	};
-
-	pinctrl_adc10_default: adc10_default {
-		function = "ADC10";
-		groups = "ADC10";
-	};
-
-	pinctrl_adc11_default: adc11_default {
-		function = "ADC11";
-		groups = "ADC11";
-	};
-
-	pinctrl_adc12_default: adc12_default {
-		function = "ADC12";
-		groups = "ADC12";
-	};
-
-	pinctrl_adc13_default: adc13_default {
-		function = "ADC13";
-		groups = "ADC13";
-	};
-
-	pinctrl_adc14_default: adc14_default {
-		function = "ADC14";
-		groups = "ADC14";
-	};
-
-	pinctrl_adc15_default: adc15_default {
-		function = "ADC15";
-		groups = "ADC15";
-	};
-
-	pinctrl_adc2_default: adc2_default {
-		function = "ADC2";
-		groups = "ADC2";
-	};
-
-	pinctrl_adc3_default: adc3_default {
-		function = "ADC3";
-		groups = "ADC3";
-	};
-
-	pinctrl_adc4_default: adc4_default {
-		function = "ADC4";
-		groups = "ADC4";
-	};
-
-	pinctrl_adc5_default: adc5_default {
-		function = "ADC5";
-		groups = "ADC5";
-	};
-
-	pinctrl_adc6_default: adc6_default {
-		function = "ADC6";
-		groups = "ADC6";
-	};
-
-	pinctrl_adc7_default: adc7_default {
-		function = "ADC7";
-		groups = "ADC7";
-	};
-
-	pinctrl_adc8_default: adc8_default {
-		function = "ADC8";
-		groups = "ADC8";
-	};
-
-	pinctrl_adc9_default: adc9_default {
-		function = "ADC9";
-		groups = "ADC9";
-	};
-
-	pinctrl_bmcint_default: bmcint_default {
-		function = "BMCINT";
-		groups = "BMCINT";
-	};
-
-	pinctrl_ddcclk_default: ddcclk_default {
-		function = "DDCCLK";
-		groups = "DDCCLK";
-	};
-
-	pinctrl_ddcdat_default: ddcdat_default {
-		function = "DDCDAT";
-		groups = "DDCDAT";
-	};
-
-	pinctrl_extrst_default: extrst_default {
-		function = "EXTRST";
-		groups = "EXTRST";
-	};
-
-	pinctrl_flack_default: flack_default {
-		function = "FLACK";
-		groups = "FLACK";
-	};
-
-	pinctrl_flbusy_default: flbusy_default {
-		function = "FLBUSY";
-		groups = "FLBUSY";
-	};
-
-	pinctrl_flwp_default: flwp_default {
-		function = "FLWP";
-		groups = "FLWP";
-	};
-
-	pinctrl_gpid_default: gpid_default {
-		function = "GPID";
-		groups = "GPID";
-	};
-
-	pinctrl_gpid0_default: gpid0_default {
-		function = "GPID0";
-		groups = "GPID0";
-	};
-
-	pinctrl_gpid2_default: gpid2_default {
-		function = "GPID2";
-		groups = "GPID2";
-	};
-
-	pinctrl_gpid4_default: gpid4_default {
-		function = "GPID4";
-		groups = "GPID4";
-	};
-
-	pinctrl_gpid6_default: gpid6_default {
-		function = "GPID6";
-		groups = "GPID6";
-	};
-
-	pinctrl_gpie0_default: gpie0_default {
-		function = "GPIE0";
-		groups = "GPIE0";
-	};
-
-	pinctrl_gpie2_default: gpie2_default {
-		function = "GPIE2";
-		groups = "GPIE2";
-	};
-
-	pinctrl_gpie4_default: gpie4_default {
-		function = "GPIE4";
-		groups = "GPIE4";
-	};
-
-	pinctrl_gpie6_default: gpie6_default {
-		function = "GPIE6";
-		groups = "GPIE6";
-	};
-
-	pinctrl_i2c10_default: i2c10_default {
-		function = "I2C10";
-		groups = "I2C10";
-	};
-
-	pinctrl_i2c11_default: i2c11_default {
-		function = "I2C11";
-		groups = "I2C11";
-	};
-
-	pinctrl_i2c12_default: i2c12_default {
-		function = "I2C12";
-		groups = "I2C12";
-	};
-
-	pinctrl_i2c13_default: i2c13_default {
-		function = "I2C13";
-		groups = "I2C13";
-	};
-
-	pinctrl_i2c14_default: i2c14_default {
-		function = "I2C14";
-		groups = "I2C14";
-	};
-
-	pinctrl_i2c3_default: i2c3_default {
-		function = "I2C3";
-		groups = "I2C3";
-	};
-
-	pinctrl_i2c4_default: i2c4_default {
-		function = "I2C4";
-		groups = "I2C4";
-	};
-
-	pinctrl_i2c5_default: i2c5_default {
-		function = "I2C5";
-		groups = "I2C5";
-	};
-
-	pinctrl_i2c6_default: i2c6_default {
-		function = "I2C6";
-		groups = "I2C6";
-	};
-
-	pinctrl_i2c7_default: i2c7_default {
-		function = "I2C7";
-		groups = "I2C7";
-	};
-
-	pinctrl_i2c8_default: i2c8_default {
-		function = "I2C8";
-		groups = "I2C8";
-	};
-
-	pinctrl_i2c9_default: i2c9_default {
-		function = "I2C9";
-		groups = "I2C9";
-	};
-
-	pinctrl_lpcpd_default: lpcpd_default {
-		function = "LPCPD";
-		groups = "LPCPD";
-	};
-
-	pinctrl_lpcpme_default: lpcpme_default {
-		function = "LPCPME";
-		groups = "LPCPME";
-	};
-
-	pinctrl_lpcrst_default: lpcrst_default {
-		function = "LPCRST";
-		groups = "LPCRST";
-	};
-
-	pinctrl_lpcsmi_default: lpcsmi_default {
-		function = "LPCSMI";
-		groups = "LPCSMI";
-	};
-
-	pinctrl_mac1link_default: mac1link_default {
-		function = "MAC1LINK";
-		groups = "MAC1LINK";
-	};
-
-	pinctrl_mac2link_default: mac2link_default {
-		function = "MAC2LINK";
-		groups = "MAC2LINK";
-	};
-
-	pinctrl_mdio1_default: mdio1_default {
-		function = "MDIO1";
-		groups = "MDIO1";
-	};
-
-	pinctrl_mdio2_default: mdio2_default {
-		function = "MDIO2";
-		groups = "MDIO2";
-	};
-
-	pinctrl_ncts1_default: ncts1_default {
-		function = "NCTS1";
-		groups = "NCTS1";
-	};
-
-	pinctrl_ncts2_default: ncts2_default {
-		function = "NCTS2";
-		groups = "NCTS2";
-	};
-
-	pinctrl_ncts3_default: ncts3_default {
-		function = "NCTS3";
-		groups = "NCTS3";
-	};
-
-	pinctrl_ncts4_default: ncts4_default {
-		function = "NCTS4";
-		groups = "NCTS4";
-	};
-
-	pinctrl_ndcd1_default: ndcd1_default {
-		function = "NDCD1";
-		groups = "NDCD1";
-	};
-
-	pinctrl_ndcd2_default: ndcd2_default {
-		function = "NDCD2";
-		groups = "NDCD2";
-	};
-
-	pinctrl_ndcd3_default: ndcd3_default {
-		function = "NDCD3";
-		groups = "NDCD3";
-	};
-
-	pinctrl_ndcd4_default: ndcd4_default {
-		function = "NDCD4";
-		groups = "NDCD4";
-	};
-
-	pinctrl_ndsr1_default: ndsr1_default {
-		function = "NDSR1";
-		groups = "NDSR1";
-	};
-
-	pinctrl_ndsr2_default: ndsr2_default {
-		function = "NDSR2";
-		groups = "NDSR2";
-	};
-
-	pinctrl_ndsr3_default: ndsr3_default {
-		function = "NDSR3";
-		groups = "NDSR3";
-	};
-
-	pinctrl_ndsr4_default: ndsr4_default {
-		function = "NDSR4";
-		groups = "NDSR4";
-	};
-
-	pinctrl_ndtr1_default: ndtr1_default {
-		function = "NDTR1";
-		groups = "NDTR1";
-	};
-
-	pinctrl_ndtr2_default: ndtr2_default {
-		function = "NDTR2";
-		groups = "NDTR2";
-	};
-
-	pinctrl_ndtr3_default: ndtr3_default {
-		function = "NDTR3";
-		groups = "NDTR3";
-	};
-
-	pinctrl_ndtr4_default: ndtr4_default {
-		function = "NDTR4";
-		groups = "NDTR4";
-	};
-
-	pinctrl_ndts4_default: ndts4_default {
-		function = "NDTS4";
-		groups = "NDTS4";
-	};
-
-	pinctrl_nri1_default: nri1_default {
-		function = "NRI1";
-		groups = "NRI1";
-	};
-
-	pinctrl_nri2_default: nri2_default {
-		function = "NRI2";
-		groups = "NRI2";
-	};
-
-	pinctrl_nri3_default: nri3_default {
-		function = "NRI3";
-		groups = "NRI3";
-	};
-
-	pinctrl_nri4_default: nri4_default {
-		function = "NRI4";
-		groups = "NRI4";
-	};
-
-	pinctrl_nrts1_default: nrts1_default {
-		function = "NRTS1";
-		groups = "NRTS1";
-	};
-
-	pinctrl_nrts2_default: nrts2_default {
-		function = "NRTS2";
-		groups = "NRTS2";
-	};
-
-	pinctrl_nrts3_default: nrts3_default {
-		function = "NRTS3";
-		groups = "NRTS3";
-	};
-
-	pinctrl_oscclk_default: oscclk_default {
-		function = "OSCCLK";
-		groups = "OSCCLK";
-	};
-
-	pinctrl_pwm0_default: pwm0_default {
-		function = "PWM0";
-		groups = "PWM0";
-	};
-
-	pinctrl_pwm1_default: pwm1_default {
-		function = "PWM1";
-		groups = "PWM1";
-	};
-
-	pinctrl_pwm2_default: pwm2_default {
-		function = "PWM2";
-		groups = "PWM2";
-	};
-
-	pinctrl_pwm3_default: pwm3_default {
-		function = "PWM3";
-		groups = "PWM3";
-	};
-
-	pinctrl_pwm4_default: pwm4_default {
-		function = "PWM4";
-		groups = "PWM4";
-	};
-
-	pinctrl_pwm5_default: pwm5_default {
-		function = "PWM5";
-		groups = "PWM5";
-	};
-
-	pinctrl_pwm6_default: pwm6_default {
-		function = "PWM6";
-		groups = "PWM6";
-	};
-
-	pinctrl_pwm7_default: pwm7_default {
-		function = "PWM7";
-		groups = "PWM7";
-	};
-
-	pinctrl_rgmii1_default: rgmii1_default {
-		function = "RGMII1";
-		groups = "RGMII1";
-	};
-
-	pinctrl_rgmii2_default: rgmii2_default {
-		function = "RGMII2";
-		groups = "RGMII2";
-	};
-
-	pinctrl_rmii1_default: rmii1_default {
-		function = "RMII1";
-		groups = "RMII1";
-	};
-
-	pinctrl_rmii2_default: rmii2_default {
-		function = "RMII2";
-		groups = "RMII2";
-	};
-
-	pinctrl_rom16_default: rom16_default {
-		function = "ROM16";
-		groups = "ROM16";
-	};
-
-	pinctrl_rom8_default: rom8_default {
-		function = "ROM8";
-		groups = "ROM8";
-	};
-
-	pinctrl_romcs1_default: romcs1_default {
-		function = "ROMCS1";
-		groups = "ROMCS1";
-	};
-
-	pinctrl_romcs2_default: romcs2_default {
-		function = "ROMCS2";
-		groups = "ROMCS2";
-	};
-
-	pinctrl_romcs3_default: romcs3_default {
-		function = "ROMCS3";
-		groups = "ROMCS3";
-	};
-
-	pinctrl_romcs4_default: romcs4_default {
-		function = "ROMCS4";
-		groups = "ROMCS4";
-	};
-
-	pinctrl_rxd1_default: rxd1_default {
-		function = "RXD1";
-		groups = "RXD1";
-	};
-
-	pinctrl_rxd2_default: rxd2_default {
-		function = "RXD2";
-		groups = "RXD2";
-	};
-
-	pinctrl_rxd3_default: rxd3_default {
-		function = "RXD3";
-		groups = "RXD3";
-	};
-
-	pinctrl_rxd4_default: rxd4_default {
-		function = "RXD4";
-		groups = "RXD4";
-	};
-
-	pinctrl_salt1_default: salt1_default {
-		function = "SALT1";
-		groups = "SALT1";
-	};
-
-	pinctrl_salt2_default: salt2_default {
-		function = "SALT2";
-		groups = "SALT2";
-	};
-
-	pinctrl_salt3_default: salt3_default {
-		function = "SALT3";
-		groups = "SALT3";
-	};
-
-	pinctrl_salt4_default: salt4_default {
-		function = "SALT4";
-		groups = "SALT4";
-	};
-
-	pinctrl_sd1_default: sd1_default {
-		function = "SD1";
-		groups = "SD1";
-	};
-
-	pinctrl_sd2_default: sd2_default {
-		function = "SD2";
-		groups = "SD2";
-	};
-
-	pinctrl_sgpmck_default: sgpmck_default {
-		function = "SGPMCK";
-		groups = "SGPMCK";
-	};
-
-	pinctrl_sgpmi_default: sgpmi_default {
-		function = "SGPMI";
-		groups = "SGPMI";
-	};
-
-	pinctrl_sgpmld_default: sgpmld_default {
-		function = "SGPMLD";
-		groups = "SGPMLD";
-	};
-
-	pinctrl_sgpmo_default: sgpmo_default {
-		function = "SGPMO";
-		groups = "SGPMO";
-	};
-
-	pinctrl_sgpsck_default: sgpsck_default {
-		function = "SGPSCK";
-		groups = "SGPSCK";
-	};
-
-	pinctrl_sgpsi0_default: sgpsi0_default {
-		function = "SGPSI0";
-		groups = "SGPSI0";
-	};
-
-	pinctrl_sgpsi1_default: sgpsi1_default {
-		function = "SGPSI1";
-		groups = "SGPSI1";
-	};
-
-	pinctrl_sgpsld_default: sgpsld_default {
-		function = "SGPSLD";
-		groups = "SGPSLD";
-	};
-
-	pinctrl_sioonctrl_default: sioonctrl_default {
-		function = "SIOONCTRL";
-		groups = "SIOONCTRL";
-	};
-
-	pinctrl_siopbi_default: siopbi_default {
-		function = "SIOPBI";
-		groups = "SIOPBI";
-	};
-
-	pinctrl_siopbo_default: siopbo_default {
-		function = "SIOPBO";
-		groups = "SIOPBO";
-	};
-
-	pinctrl_siopwreq_default: siopwreq_default {
-		function = "SIOPWREQ";
-		groups = "SIOPWREQ";
-	};
-
-	pinctrl_siopwrgd_default: siopwrgd_default {
-		function = "SIOPWRGD";
-		groups = "SIOPWRGD";
-	};
-
-	pinctrl_sios3_default: sios3_default {
-		function = "SIOS3";
-		groups = "SIOS3";
-	};
-
-	pinctrl_sios5_default: sios5_default {
-		function = "SIOS5";
-		groups = "SIOS5";
-	};
-
-	pinctrl_siosci_default: siosci_default {
-		function = "SIOSCI";
-		groups = "SIOSCI";
-	};
-
-	pinctrl_spi1_default: spi1_default {
-		function = "SPI1";
-		groups = "SPI1";
-	};
-
-	pinctrl_spi1debug_default: spi1debug_default {
-		function = "SPI1DEBUG";
-		groups = "SPI1DEBUG";
-	};
-
-	pinctrl_spi1passthru_default: spi1passthru_default {
-		function = "SPI1PASSTHRU";
-		groups = "SPI1PASSTHRU";
-	};
-
-	pinctrl_spics1_default: spics1_default {
-		function = "SPICS1";
-		groups = "SPICS1";
-	};
-
-	pinctrl_timer3_default: timer3_default {
-		function = "TIMER3";
-		groups = "TIMER3";
-	};
-
-	pinctrl_timer4_default: timer4_default {
-		function = "TIMER4";
-		groups = "TIMER4";
-	};
-
-	pinctrl_timer5_default: timer5_default {
-		function = "TIMER5";
-		groups = "TIMER5";
-	};
-
-	pinctrl_timer6_default: timer6_default {
-		function = "TIMER6";
-		groups = "TIMER6";
-	};
-
-	pinctrl_timer7_default: timer7_default {
-		function = "TIMER7";
-		groups = "TIMER7";
-	};
-
-	pinctrl_timer8_default: timer8_default {
-		function = "TIMER8";
-		groups = "TIMER8";
-	};
-
-	pinctrl_txd1_default: txd1_default {
-		function = "TXD1";
-		groups = "TXD1";
-	};
-
-	pinctrl_txd2_default: txd2_default {
-		function = "TXD2";
-		groups = "TXD2";
-	};
-
-	pinctrl_txd3_default: txd3_default {
-		function = "TXD3";
-		groups = "TXD3";
-	};
-
-	pinctrl_txd4_default: txd4_default {
-		function = "TXD4";
-		groups = "TXD4";
-	};
-
-	pinctrl_uart6_default: uart6_default {
-		function = "UART6";
-		groups = "UART6";
-	};
-
-	pinctrl_usbcki_default: usbcki_default {
-		function = "USBCKI";
-		groups = "USBCKI";
-	};
-
-	pinctrl_usb2h_default: usb2h_default {
-		function = "USB2H1";
-		groups = "USB2H1";
-	};
-
-	pinctrl_usb2d_default: usb2d_default {
-		function = "USB2D1";
-		groups = "USB2D1";
-	};
-
-	pinctrl_vgabios_rom_default: vgabios_rom_default {
-		function = "VGABIOS_ROM";
-		groups = "VGABIOS_ROM";
-	};
-
-	pinctrl_vgahs_default: vgahs_default {
-		function = "VGAHS";
-		groups = "VGAHS";
-	};
-
-	pinctrl_vgavs_default: vgavs_default {
-		function = "VGAVS";
-		groups = "VGAVS";
-	};
-
-	pinctrl_vpi18_default: vpi18_default {
-		function = "VPI18";
-		groups = "VPI18";
-	};
-
-	pinctrl_vpi24_default: vpi24_default {
-		function = "VPI24";
-		groups = "VPI24";
-	};
-
-	pinctrl_vpi30_default: vpi30_default {
-		function = "VPI30";
-		groups = "VPI30";
-	};
-
-	pinctrl_vpo12_default: vpo12_default {
-		function = "VPO12";
-		groups = "VPO12";
-	};
-
-	pinctrl_vpo24_default: vpo24_default {
-		function = "VPO24";
-		groups = "VPO24";
-	};
-
-	pinctrl_wdtrst1_default: wdtrst1_default {
-		function = "WDTRST1";
-		groups = "WDTRST1";
-	};
-
-	pinctrl_wdtrst2_default: wdtrst2_default {
-		function = "WDTRST2";
-		groups = "WDTRST2";
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
deleted file mode 100644
index 04f98d1dbb97c..0000000000000
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ /dev/null
@@ -1,1661 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-#include <dt-bindings/clock/aspeed-clock.h>
-#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
-
-/ {
-	model = "Aspeed BMC";
-	compatible = "aspeed,ast2500";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&vic>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		i2c8 = &i2c8;
-		i2c9 = &i2c9;
-		i2c10 = &i2c10;
-		i2c11 = &i2c11;
-		i2c12 = &i2c12;
-		i2c13 = &i2c13;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &vuart;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm1176jzf-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		fmc: spi@1e620000 {
-			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "aspeed,ast2500-fmc";
-			clocks = <&syscon ASPEED_CLK_AHB>;
-			status = "disabled";
-			interrupts = <19>;
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@1 {
-				reg = < 1 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@2 {
-				reg = < 2 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-		};
-
-		spi1: spi@1e630000 {
-			reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "aspeed,ast2500-spi";
-			clocks = <&syscon ASPEED_CLK_AHB>;
-			status = "disabled";
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@1 {
-				reg = < 1 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-		};
-
-		spi2: spi@1e631000 {
-			reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "aspeed,ast2500-spi";
-			clocks = <&syscon ASPEED_CLK_AHB>;
-			status = "disabled";
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@1 {
-				reg = < 1 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-		};
-
-		vic: interrupt-controller@1e6c0080 {
-			compatible = "aspeed,ast2400-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			valid-sources = <0xfefff7ff 0x0807ffff>;
-			reg = <0x1e6c0080 0x80>;
-		};
-
-		cvic: copro-interrupt-controller@1e6c2000 {
-			compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
-			valid-sources = <0xffffffff>;
-			copro-sw-interrupts = <1>;
-			reg = <0x1e6c2000 0x80>;
-		};
-
-		mac0: ethernet@1e660000 {
-			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
-			reg = <0x1e660000 0x180>;
-			interrupts = <2>;
-			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
-			status = "disabled";
-		};
-
-		mac1: ethernet@1e680000 {
-			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
-			reg = <0x1e680000 0x180>;
-			interrupts = <3>;
-			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
-			status = "disabled";
-		};
-
-		ehci0: usb@1e6a1000 {
-			compatible = "aspeed,ast2500-ehci", "generic-ehci";
-			reg = <0x1e6a1000 0x100>;
-			interrupts = <5>;
-			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2ah_default>;
-			status = "disabled";
-		};
-
-		ehci1: usb@1e6a3000 {
-			compatible = "aspeed,ast2500-ehci", "generic-ehci";
-			reg = <0x1e6a3000 0x100>;
-			interrupts = <13>;
-			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2bh_default>;
-			status = "disabled";
-		};
-
-		uhci: usb@1e6b0000 {
-			compatible = "aspeed,ast2500-uhci", "generic-uhci";
-			reg = <0x1e6b0000 0x100>;
-			interrupts = <14>;
-			#ports = <2>;
-			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
-			status = "disabled";
-			/*
-			 * No default pinmux, it will follow EHCI, use an explicit pinmux
-			 * override if you don't enable EHCI
-			 */
-		};
-
-		vhub: usb-vhub@1e6a0000 {
-			compatible = "aspeed,ast2500-usb-vhub";
-			reg = <0x1e6a0000 0x300>;
-			interrupts = <5>;
-			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
-			aspeed,vhub-downstream-ports = <5>;
-			aspeed,vhub-generic-endpoints = <15>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2ad_default>;
-			status = "disabled";
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			edac: memory-controller@1e6e0000 {
-				compatible = "aspeed,ast2500-sdram-edac";
-				reg = <0x1e6e0000 0x174>;
-				interrupts = <0>;
-				status = "disabled";
-			};
-
-			syscon: syscon@1e6e2000 {
-				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
-				reg = <0x1e6e2000 0x1a8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1e6e2000 0x1000>;
-				#clock-cells = <1>;
-				#reset-cells = <1>;
-
-				scu_ic: interrupt-controller@18 {
-					#interrupt-cells = <1>;
-					compatible = "aspeed,ast2500-scu-ic";
-					reg = <0x18 0x4>;
-					interrupts = <21>;
-					interrupt-controller;
-				};
-
-				p2a: p2a-control@2c {
-					compatible = "aspeed,ast2500-p2a-ctrl";
-					reg = <0x2c 0x4>;
-					status = "disabled";
-				};
-
-				silicon-id@7c {
-					compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
-					reg = <0x7c 0x4 0x150 0x8>;
-				};
-
-				pinctrl: pinctrl@80 {
-					compatible = "aspeed,ast2500-pinctrl";
-					reg = <0x80 0x18>, <0xa0 0x10>;
-					aspeed,external-nodes = <&gfx>, <&lhc>;
-				};
-			};
-
-			rng: hwrng@1e6e2078 {
-				compatible = "timeriomem_rng";
-				reg = <0x1e6e2078 0x4>;
-				period = <1>;
-				quality = <100>;
-			};
-
-			hace: crypto@1e6e3000 {
-				compatible = "aspeed,ast2500-hace";
-				reg = <0x1e6e3000 0x100>;
-				interrupts = <4>;
-				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
-				resets = <&syscon ASPEED_RESET_HACE>;
-			};
-
-			gfx: display@1e6e6000 {
-				compatible = "aspeed,ast2500-gfx", "syscon";
-				reg = <0x1e6e6000 0x1000>;
-				reg-io-width = <4>;
-				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
-				resets = <&syscon ASPEED_RESET_CRT1>;
-				syscon = <&syscon>;
-				status = "disabled";
-				interrupts = <0x19>;
-			};
-
-			xdma: xdma@1e6e7000 {
-				compatible = "aspeed,ast2500-xdma";
-				reg = <0x1e6e7000 0x100>;
-				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
-				resets = <&syscon ASPEED_RESET_XDMA>;
-				interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
-				aspeed,pcie-device = "bmc";
-				aspeed,scu = <&syscon>;
-				status = "disabled";
-			};
-
-			adc: adc@1e6e9000 {
-				compatible = "aspeed,ast2500-adc";
-				reg = <0x1e6e9000 0xb0>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-				resets = <&syscon ASPEED_RESET_ADC>;
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-
-			video: video@1e700000 {
-				compatible = "aspeed,ast2500-video-engine";
-				reg = <0x1e700000 0x1000>;
-				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
-					 <&syscon ASPEED_CLK_GATE_ECLK>;
-				clock-names = "vclk", "eclk";
-				interrupts = <7>;
-				status = "disabled";
-			};
-
-			sram: sram@1e720000 {
-				compatible = "mmio-sram";
-				reg = <0x1e720000 0x9000>;	// 36K
-			};
-
-			sdmmc: sd-controller@1e740000 {
-				compatible = "aspeed,ast2500-sd-controller";
-				reg = <0x1e740000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1e740000 0x10000>;
-				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
-				status = "disabled";
-
-				sdhci0: sdhci@100 {
-					compatible = "aspeed,ast2500-sdhci";
-					reg = <0x100 0x100>;
-					interrupts = <26>;
-					sdhci,auto-cmd12;
-					clocks = <&syscon ASPEED_CLK_SDIO>;
-					status = "disabled";
-				};
-
-				sdhci1: sdhci@200 {
-					compatible = "aspeed,ast2500-sdhci";
-					reg = <0x200 0x100>;
-					interrupts = <26>;
-					sdhci,auto-cmd12;
-					clocks = <&syscon ASPEED_CLK_SDIO>;
-					status = "disabled";
-				};
-			};
-
-			gpio: gpio@1e780000 {
-				#gpio-cells = <2>;
-				gpio-controller;
-				compatible = "aspeed,ast2500-gpio";
-				reg = <0x1e780000 0x200>;
-				interrupts = <20>;
-				gpio-ranges = <&pinctrl 0 0 232>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			sgpio: sgpio@1e780200 {
-				#gpio-cells = <2>;
-				compatible = "aspeed,ast2500-sgpio";
-				gpio-controller;
-				interrupts = <40>;
-				reg = <0x1e780200 0x0100>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-				interrupt-controller;
-				bus-frequency = <12000000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_sgpm_default>;
-				status = "disabled";
-			};
-
-			rtc: rtc@1e781000 {
-				compatible = "aspeed,ast2500-rtc";
-				reg = <0x1e781000 0x18>;
-				status = "disabled";
-			};
-
-			timer: timer@1e782000 {
-				/* This timer is a Faraday FTTMR010 derivative */
-				compatible = "aspeed,ast2400-timer";
-				reg = <0x1e782000 0x90>;
-				interrupts = <16 17 18 35 36 37 38 39>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-				clock-names = "PCLK";
-			};
-
-			uart1: serial@1e783000 {
-				compatible = "ns16550a";
-				reg = <0x1e783000 0x20>;
-				reg-shift = <2>;
-				interrupts = <9>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
-				resets = <&lpc_reset 4>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart5: serial@1e784000 {
-				compatible = "ns16550a";
-				reg = <0x1e784000 0x20>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			wdt1: watchdog@1e785000 {
-				compatible = "aspeed,ast2500-wdt";
-				reg = <0x1e785000 0x20>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-			};
-
-			wdt2: watchdog@1e785020 {
-				compatible = "aspeed,ast2500-wdt";
-				reg = <0x1e785020 0x20>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-			};
-
-			wdt3: watchdog@1e785040 {
-				compatible = "aspeed,ast2500-wdt";
-				reg = <0x1e785040 0x20>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-				status = "disabled";
-			};
-
-			pwm_tacho: pwm-tacho-controller@1e786000 {
-				compatible = "aspeed,ast2500-pwm-tacho";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x1e786000 0x1000>;
-				clocks = <&syscon ASPEED_CLK_24M>;
-				resets = <&syscon ASPEED_RESET_PWM>;
-				status = "disabled";
-			};
-
-			vuart: serial@1e787000 {
-				compatible = "aspeed,ast2500-vuart";
-				reg = <0x1e787000 0x40>;
-				reg-shift = <2>;
-				interrupts = <8>;
-				clocks = <&syscon ASPEED_CLK_APB>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
-				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
-
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x1e789000 0x1000>;
-
-				kcs1: kcs@24 {
-					compatible = "aspeed,ast2500-kcs-bmc-v2";
-					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
-					interrupts = <8>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				kcs2: kcs@28 {
-					compatible = "aspeed,ast2500-kcs-bmc-v2";
-					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
-					interrupts = <8>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				kcs3: kcs@2c {
-					compatible = "aspeed,ast2500-kcs-bmc-v2";
-					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
-					interrupts = <8>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				kcs4: kcs@114 {
-					compatible = "aspeed,ast2500-kcs-bmc-v2";
-					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
-					interrupts = <8>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				lpc_ctrl: lpc-ctrl@80 {
-					compatible = "aspeed,ast2500-lpc-ctrl";
-					reg = <0x80 0x10>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				lpc_snoop: lpc-snoop@90 {
-					compatible = "aspeed,ast2500-lpc-snoop";
-					reg = <0x90 0x8>;
-					interrupts = <8>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				lpc_reset: reset-controller@98 {
-					compatible = "aspeed,ast2500-lpc-reset";
-					reg = <0x98 0x4>;
-					#reset-cells = <1>;
-				};
-
-				uart_routing: uart-routing@9c {
-					compatible = "aspeed,ast2500-uart-routing";
-					reg = <0x9c 0x4>;
-					status = "disabled";
-				};
-
-				lhc: lhc@a0 {
-					compatible = "aspeed,ast2500-lhc";
-					reg = <0xa0 0x24 0xc8 0x8>;
-				};
-
-
-				ibt: ibt@140 {
-					compatible = "aspeed,ast2500-ibt-bmc";
-					reg = <0x140 0x18>;
-					interrupts = <8>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-			};
-
-			peci0: peci-controller@1e78b000 {
-				compatible = "aspeed,ast2500-peci";
-				reg = <0x1e78b000 0x60>;
-				interrupts = <15>;
-				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
-				resets = <&syscon ASPEED_RESET_PECI>;
-				cmd-timeout-ms = <1000>;
-				clock-frequency = <1000000>;
-				status = "disabled";
-			};
-
-			uart2: serial@1e78d000 {
-				compatible = "ns16550a";
-				reg = <0x1e78d000 0x20>;
-				reg-shift = <2>;
-				interrupts = <32>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
-				resets = <&lpc_reset 5>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart3: serial@1e78e000 {
-				compatible = "ns16550a";
-				reg = <0x1e78e000 0x20>;
-				reg-shift = <2>;
-				interrupts = <33>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
-				resets = <&lpc_reset 6>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart4: serial@1e78f000 {
-				compatible = "ns16550a";
-				reg = <0x1e78f000 0x20>;
-				reg-shift = <2>;
-				interrupts = <34>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
-				resets = <&lpc_reset 7>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			i2c: bus@1e78a000 {
-				compatible = "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1e78a000 0x1000>;
-			};
-		};
-	};
-};
-
-&i2c {
-	i2c_ic: interrupt-controller@0 {
-		#interrupt-cells = <1>;
-		compatible = "aspeed,ast2500-i2c-ic";
-		reg = <0x0 0x40>;
-		interrupts = <12>;
-		interrupt-controller;
-	};
-
-	i2c0: i2c-bus@40 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x40 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <0>;
-		interrupt-parent = <&i2c_ic>;
-		status = "disabled";
-		/* Does not need pinctrl properties */
-	};
-
-	i2c1: i2c-bus@80 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x80 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <1>;
-		interrupt-parent = <&i2c_ic>;
-		status = "disabled";
-		/* Does not need pinctrl properties */
-	};
-
-	i2c2: i2c-bus@c0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0xc0 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <2>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3_default>;
-		status = "disabled";
-	};
-
-	i2c3: i2c-bus@100 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x100 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <3>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c4_default>;
-		status = "disabled";
-	};
-
-	i2c4: i2c-bus@140 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x140 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <4>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c5_default>;
-		status = "disabled";
-	};
-
-	i2c5: i2c-bus@180 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x180 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <5>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c6_default>;
-		status = "disabled";
-	};
-
-	i2c6: i2c-bus@1c0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x1c0 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <6>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c7_default>;
-		status = "disabled";
-	};
-
-	i2c7: i2c-bus@300 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x300 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <7>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c8_default>;
-		status = "disabled";
-	};
-
-	i2c8: i2c-bus@340 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x340 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <8>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c9_default>;
-		status = "disabled";
-	};
-
-	i2c9: i2c-bus@380 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x380 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <9>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c10_default>;
-		status = "disabled";
-	};
-
-	i2c10: i2c-bus@3c0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x3c0 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <10>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c11_default>;
-		status = "disabled";
-	};
-
-	i2c11: i2c-bus@400 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x400 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <11>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c12_default>;
-		status = "disabled";
-	};
-
-	i2c12: i2c-bus@440 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x440 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <12>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c13_default>;
-		status = "disabled";
-	};
-
-	i2c13: i2c-bus@480 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-
-		reg = <0x480 0x40>;
-		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <13>;
-		interrupt-parent = <&i2c_ic>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c14_default>;
-		status = "disabled";
-	};
-};
-
-&pinctrl {
-	pinctrl_acpi_default: acpi_default {
-		function = "ACPI";
-		groups = "ACPI";
-	};
-
-	pinctrl_adc0_default: adc0_default {
-		function = "ADC0";
-		groups = "ADC0";
-	};
-
-	pinctrl_adc1_default: adc1_default {
-		function = "ADC1";
-		groups = "ADC1";
-	};
-
-	pinctrl_adc10_default: adc10_default {
-		function = "ADC10";
-		groups = "ADC10";
-	};
-
-	pinctrl_adc11_default: adc11_default {
-		function = "ADC11";
-		groups = "ADC11";
-	};
-
-	pinctrl_adc12_default: adc12_default {
-		function = "ADC12";
-		groups = "ADC12";
-	};
-
-	pinctrl_adc13_default: adc13_default {
-		function = "ADC13";
-		groups = "ADC13";
-	};
-
-	pinctrl_adc14_default: adc14_default {
-		function = "ADC14";
-		groups = "ADC14";
-	};
-
-	pinctrl_adc15_default: adc15_default {
-		function = "ADC15";
-		groups = "ADC15";
-	};
-
-	pinctrl_adc2_default: adc2_default {
-		function = "ADC2";
-		groups = "ADC2";
-	};
-
-	pinctrl_adc3_default: adc3_default {
-		function = "ADC3";
-		groups = "ADC3";
-	};
-
-	pinctrl_adc4_default: adc4_default {
-		function = "ADC4";
-		groups = "ADC4";
-	};
-
-	pinctrl_adc5_default: adc5_default {
-		function = "ADC5";
-		groups = "ADC5";
-	};
-
-	pinctrl_adc6_default: adc6_default {
-		function = "ADC6";
-		groups = "ADC6";
-	};
-
-	pinctrl_adc7_default: adc7_default {
-		function = "ADC7";
-		groups = "ADC7";
-	};
-
-	pinctrl_adc8_default: adc8_default {
-		function = "ADC8";
-		groups = "ADC8";
-	};
-
-	pinctrl_adc9_default: adc9_default {
-		function = "ADC9";
-		groups = "ADC9";
-	};
-
-	pinctrl_bmcint_default: bmcint_default {
-		function = "BMCINT";
-		groups = "BMCINT";
-	};
-
-	pinctrl_ddcclk_default: ddcclk_default {
-		function = "DDCCLK";
-		groups = "DDCCLK";
-	};
-
-	pinctrl_ddcdat_default: ddcdat_default {
-		function = "DDCDAT";
-		groups = "DDCDAT";
-	};
-
-	pinctrl_espi_default: espi_default {
-		function = "ESPI";
-		groups = "ESPI";
-	};
-
-	pinctrl_fwspics1_default: fwspics1_default {
-		function = "FWSPICS1";
-		groups = "FWSPICS1";
-	};
-
-	pinctrl_fwspics2_default: fwspics2_default {
-		function = "FWSPICS2";
-		groups = "FWSPICS2";
-	};
-
-	pinctrl_gpid0_default: gpid0_default {
-		function = "GPID0";
-		groups = "GPID0";
-	};
-
-	pinctrl_gpid2_default: gpid2_default {
-		function = "GPID2";
-		groups = "GPID2";
-	};
-
-	pinctrl_gpid4_default: gpid4_default {
-		function = "GPID4";
-		groups = "GPID4";
-	};
-
-	pinctrl_gpid6_default: gpid6_default {
-		function = "GPID6";
-		groups = "GPID6";
-	};
-
-	pinctrl_gpie0_default: gpie0_default {
-		function = "GPIE0";
-		groups = "GPIE0";
-	};
-
-	pinctrl_gpie2_default: gpie2_default {
-		function = "GPIE2";
-		groups = "GPIE2";
-	};
-
-	pinctrl_gpie4_default: gpie4_default {
-		function = "GPIE4";
-		groups = "GPIE4";
-	};
-
-	pinctrl_gpie6_default: gpie6_default {
-		function = "GPIE6";
-		groups = "GPIE6";
-	};
-
-	pinctrl_i2c10_default: i2c10_default {
-		function = "I2C10";
-		groups = "I2C10";
-	};
-
-	pinctrl_i2c11_default: i2c11_default {
-		function = "I2C11";
-		groups = "I2C11";
-	};
-
-	pinctrl_i2c12_default: i2c12_default {
-		function = "I2C12";
-		groups = "I2C12";
-	};
-
-	pinctrl_i2c13_default: i2c13_default {
-		function = "I2C13";
-		groups = "I2C13";
-	};
-
-	pinctrl_i2c14_default: i2c14_default {
-		function = "I2C14";
-		groups = "I2C14";
-	};
-
-	pinctrl_i2c3_default: i2c3_default {
-		function = "I2C3";
-		groups = "I2C3";
-	};
-
-	pinctrl_i2c4_default: i2c4_default {
-		function = "I2C4";
-		groups = "I2C4";
-	};
-
-	pinctrl_i2c5_default: i2c5_default {
-		function = "I2C5";
-		groups = "I2C5";
-	};
-
-	pinctrl_i2c6_default: i2c6_default {
-		function = "I2C6";
-		groups = "I2C6";
-	};
-
-	pinctrl_i2c7_default: i2c7_default {
-		function = "I2C7";
-		groups = "I2C7";
-	};
-
-	pinctrl_i2c8_default: i2c8_default {
-		function = "I2C8";
-		groups = "I2C8";
-	};
-
-	pinctrl_i2c9_default: i2c9_default {
-		function = "I2C9";
-		groups = "I2C9";
-	};
-
-	pinctrl_lad0_default: lad0_default {
-		function = "LAD0";
-		groups = "LAD0";
-	};
-
-	pinctrl_lad1_default: lad1_default {
-		function = "LAD1";
-		groups = "LAD1";
-	};
-
-	pinctrl_lad2_default: lad2_default {
-		function = "LAD2";
-		groups = "LAD2";
-	};
-
-	pinctrl_lad3_default: lad3_default {
-		function = "LAD3";
-		groups = "LAD3";
-	};
-
-	pinctrl_lclk_default: lclk_default {
-		function = "LCLK";
-		groups = "LCLK";
-	};
-
-	pinctrl_lframe_default: lframe_default {
-		function = "LFRAME";
-		groups = "LFRAME";
-	};
-
-	pinctrl_lpchc_default: lpchc_default {
-		function = "LPCHC";
-		groups = "LPCHC";
-	};
-
-	pinctrl_lpcpd_default: lpcpd_default {
-		function = "LPCPD";
-		groups = "LPCPD";
-	};
-
-	pinctrl_lpcplus_default: lpcplus_default {
-		function = "LPCPLUS";
-		groups = "LPCPLUS";
-	};
-
-	pinctrl_lpcpme_default: lpcpme_default {
-		function = "LPCPME";
-		groups = "LPCPME";
-	};
-
-	pinctrl_lpcrst_default: lpcrst_default {
-		function = "LPCRST";
-		groups = "LPCRST";
-	};
-
-	pinctrl_lpcsmi_default: lpcsmi_default {
-		function = "LPCSMI";
-		groups = "LPCSMI";
-	};
-
-	pinctrl_lsirq_default: lsirq_default {
-		function = "LSIRQ";
-		groups = "LSIRQ";
-	};
-
-	pinctrl_mac1link_default: mac1link_default {
-		function = "MAC1LINK";
-		groups = "MAC1LINK";
-	};
-
-	pinctrl_mac2link_default: mac2link_default {
-		function = "MAC2LINK";
-		groups = "MAC2LINK";
-	};
-
-	pinctrl_mdio1_default: mdio1_default {
-		function = "MDIO1";
-		groups = "MDIO1";
-	};
-
-	pinctrl_mdio2_default: mdio2_default {
-		function = "MDIO2";
-		groups = "MDIO2";
-	};
-
-	pinctrl_ncts1_default: ncts1_default {
-		function = "NCTS1";
-		groups = "NCTS1";
-	};
-
-	pinctrl_ncts2_default: ncts2_default {
-		function = "NCTS2";
-		groups = "NCTS2";
-	};
-
-	pinctrl_ncts3_default: ncts3_default {
-		function = "NCTS3";
-		groups = "NCTS3";
-	};
-
-	pinctrl_ncts4_default: ncts4_default {
-		function = "NCTS4";
-		groups = "NCTS4";
-	};
-
-	pinctrl_ndcd1_default: ndcd1_default {
-		function = "NDCD1";
-		groups = "NDCD1";
-	};
-
-	pinctrl_ndcd2_default: ndcd2_default {
-		function = "NDCD2";
-		groups = "NDCD2";
-	};
-
-	pinctrl_ndcd3_default: ndcd3_default {
-		function = "NDCD3";
-		groups = "NDCD3";
-	};
-
-	pinctrl_ndcd4_default: ndcd4_default {
-		function = "NDCD4";
-		groups = "NDCD4";
-	};
-
-	pinctrl_ndsr1_default: ndsr1_default {
-		function = "NDSR1";
-		groups = "NDSR1";
-	};
-
-	pinctrl_ndsr2_default: ndsr2_default {
-		function = "NDSR2";
-		groups = "NDSR2";
-	};
-
-	pinctrl_ndsr3_default: ndsr3_default {
-		function = "NDSR3";
-		groups = "NDSR3";
-	};
-
-	pinctrl_ndsr4_default: ndsr4_default {
-		function = "NDSR4";
-		groups = "NDSR4";
-	};
-
-	pinctrl_ndtr1_default: ndtr1_default {
-		function = "NDTR1";
-		groups = "NDTR1";
-	};
-
-	pinctrl_ndtr2_default: ndtr2_default {
-		function = "NDTR2";
-		groups = "NDTR2";
-	};
-
-	pinctrl_ndtr3_default: ndtr3_default {
-		function = "NDTR3";
-		groups = "NDTR3";
-	};
-
-	pinctrl_ndtr4_default: ndtr4_default {
-		function = "NDTR4";
-		groups = "NDTR4";
-	};
-
-	pinctrl_nri1_default: nri1_default {
-		function = "NRI1";
-		groups = "NRI1";
-	};
-
-	pinctrl_nri2_default: nri2_default {
-		function = "NRI2";
-		groups = "NRI2";
-	};
-
-	pinctrl_nri3_default: nri3_default {
-		function = "NRI3";
-		groups = "NRI3";
-	};
-
-	pinctrl_nri4_default: nri4_default {
-		function = "NRI4";
-		groups = "NRI4";
-	};
-
-	pinctrl_nrts1_default: nrts1_default {
-		function = "NRTS1";
-		groups = "NRTS1";
-	};
-
-	pinctrl_nrts2_default: nrts2_default {
-		function = "NRTS2";
-		groups = "NRTS2";
-	};
-
-	pinctrl_nrts3_default: nrts3_default {
-		function = "NRTS3";
-		groups = "NRTS3";
-	};
-
-	pinctrl_nrts4_default: nrts4_default {
-		function = "NRTS4";
-		groups = "NRTS4";
-	};
-
-	pinctrl_oscclk_default: oscclk_default {
-		function = "OSCCLK";
-		groups = "OSCCLK";
-	};
-
-	pinctrl_pewake_default: pewake_default {
-		function = "PEWAKE";
-		groups = "PEWAKE";
-	};
-
-	pinctrl_pnor_default: pnor_default {
-		function = "PNOR";
-		groups = "PNOR";
-	};
-
-	pinctrl_pwm0_default: pwm0_default {
-		function = "PWM0";
-		groups = "PWM0";
-	};
-
-	pinctrl_pwm1_default: pwm1_default {
-		function = "PWM1";
-		groups = "PWM1";
-	};
-
-	pinctrl_pwm2_default: pwm2_default {
-		function = "PWM2";
-		groups = "PWM2";
-	};
-
-	pinctrl_pwm3_default: pwm3_default {
-		function = "PWM3";
-		groups = "PWM3";
-	};
-
-	pinctrl_pwm4_default: pwm4_default {
-		function = "PWM4";
-		groups = "PWM4";
-	};
-
-	pinctrl_pwm5_default: pwm5_default {
-		function = "PWM5";
-		groups = "PWM5";
-	};
-
-	pinctrl_pwm6_default: pwm6_default {
-		function = "PWM6";
-		groups = "PWM6";
-	};
-
-	pinctrl_pwm7_default: pwm7_default {
-		function = "PWM7";
-		groups = "PWM7";
-	};
-
-	pinctrl_rgmii1_default: rgmii1_default {
-		function = "RGMII1";
-		groups = "RGMII1";
-	};
-
-	pinctrl_rgmii2_default: rgmii2_default {
-		function = "RGMII2";
-		groups = "RGMII2";
-	};
-
-	pinctrl_rmii1_default: rmii1_default {
-		function = "RMII1";
-		groups = "RMII1";
-	};
-
-	pinctrl_rmii2_default: rmii2_default {
-		function = "RMII2";
-		groups = "RMII2";
-	};
-
-	pinctrl_rxd1_default: rxd1_default {
-		function = "RXD1";
-		groups = "RXD1";
-	};
-
-	pinctrl_rxd2_default: rxd2_default {
-		function = "RXD2";
-		groups = "RXD2";
-	};
-
-	pinctrl_rxd3_default: rxd3_default {
-		function = "RXD3";
-		groups = "RXD3";
-	};
-
-	pinctrl_rxd4_default: rxd4_default {
-		function = "RXD4";
-		groups = "RXD4";
-	};
-
-	pinctrl_salt1_default: salt1_default {
-		function = "SALT1";
-		groups = "SALT1";
-	};
-
-	pinctrl_salt10_default: salt10_default {
-		function = "SALT10";
-		groups = "SALT10";
-	};
-
-	pinctrl_salt11_default: salt11_default {
-		function = "SALT11";
-		groups = "SALT11";
-	};
-
-	pinctrl_salt12_default: salt12_default {
-		function = "SALT12";
-		groups = "SALT12";
-	};
-
-	pinctrl_salt13_default: salt13_default {
-		function = "SALT13";
-		groups = "SALT13";
-	};
-
-	pinctrl_salt14_default: salt14_default {
-		function = "SALT14";
-		groups = "SALT14";
-	};
-
-	pinctrl_salt2_default: salt2_default {
-		function = "SALT2";
-		groups = "SALT2";
-	};
-
-	pinctrl_salt3_default: salt3_default {
-		function = "SALT3";
-		groups = "SALT3";
-	};
-
-	pinctrl_salt4_default: salt4_default {
-		function = "SALT4";
-		groups = "SALT4";
-	};
-
-	pinctrl_salt5_default: salt5_default {
-		function = "SALT5";
-		groups = "SALT5";
-	};
-
-	pinctrl_salt6_default: salt6_default {
-		function = "SALT6";
-		groups = "SALT6";
-	};
-
-	pinctrl_salt7_default: salt7_default {
-		function = "SALT7";
-		groups = "SALT7";
-	};
-
-	pinctrl_salt8_default: salt8_default {
-		function = "SALT8";
-		groups = "SALT8";
-	};
-
-	pinctrl_salt9_default: salt9_default {
-		function = "SALT9";
-		groups = "SALT9";
-	};
-
-	pinctrl_scl1_default: scl1_default {
-		function = "SCL1";
-		groups = "SCL1";
-	};
-
-	pinctrl_scl2_default: scl2_default {
-		function = "SCL2";
-		groups = "SCL2";
-	};
-
-	pinctrl_sd1_default: sd1_default {
-		function = "SD1";
-		groups = "SD1";
-	};
-
-	pinctrl_sd2_default: sd2_default {
-		function = "SD2";
-		groups = "SD2";
-	};
-
-	pinctrl_sda1_default: sda1_default {
-		function = "SDA1";
-		groups = "SDA1";
-	};
-
-	pinctrl_sda2_default: sda2_default {
-		function = "SDA2";
-		groups = "SDA2";
-	};
-
-	pinctrl_sgpm_default: sgpm_default {
-		function = "SGPM";
-		groups = "SGPM";
-	};
-
-	pinctrl_sgps1_default: sgps1_default {
-		function = "SGPS1";
-		groups = "SGPS1";
-	};
-
-	pinctrl_sgps2_default: sgps2_default {
-		function = "SGPS2";
-		groups = "SGPS2";
-	};
-
-	pinctrl_sioonctrl_default: sioonctrl_default {
-		function = "SIOONCTRL";
-		groups = "SIOONCTRL";
-	};
-
-	pinctrl_siopbi_default: siopbi_default {
-		function = "SIOPBI";
-		groups = "SIOPBI";
-	};
-
-	pinctrl_siopbo_default: siopbo_default {
-		function = "SIOPBO";
-		groups = "SIOPBO";
-	};
-
-	pinctrl_siopwreq_default: siopwreq_default {
-		function = "SIOPWREQ";
-		groups = "SIOPWREQ";
-	};
-
-	pinctrl_siopwrgd_default: siopwrgd_default {
-		function = "SIOPWRGD";
-		groups = "SIOPWRGD";
-	};
-
-	pinctrl_sios3_default: sios3_default {
-		function = "SIOS3";
-		groups = "SIOS3";
-	};
-
-	pinctrl_sios5_default: sios5_default {
-		function = "SIOS5";
-		groups = "SIOS5";
-	};
-
-	pinctrl_siosci_default: siosci_default {
-		function = "SIOSCI";
-		groups = "SIOSCI";
-	};
-
-	pinctrl_spi1_default: spi1_default {
-		function = "SPI1";
-		groups = "SPI1";
-	};
-
-	pinctrl_spi1cs1_default: spi1cs1_default {
-		function = "SPI1CS1";
-		groups = "SPI1CS1";
-	};
-
-	pinctrl_spi1debug_default: spi1debug_default {
-		function = "SPI1DEBUG";
-		groups = "SPI1DEBUG";
-	};
-
-	pinctrl_spi1passthru_default: spi1passthru_default {
-		function = "SPI1PASSTHRU";
-		groups = "SPI1PASSTHRU";
-	};
-
-	pinctrl_spi2ck_default: spi2ck_default {
-		function = "SPI2CK";
-		groups = "SPI2CK";
-	};
-
-	pinctrl_spi2cs0_default: spi2cs0_default {
-		function = "SPI2CS0";
-		groups = "SPI2CS0";
-	};
-
-	pinctrl_spi2cs1_default: spi2cs1_default {
-		function = "SPI2CS1";
-		groups = "SPI2CS1";
-	};
-
-	pinctrl_spi2miso_default: spi2miso_default {
-		function = "SPI2MISO";
-		groups = "SPI2MISO";
-	};
-
-	pinctrl_spi2mosi_default: spi2mosi_default {
-		function = "SPI2MOSI";
-		groups = "SPI2MOSI";
-	};
-
-	pinctrl_timer3_default: timer3_default {
-		function = "TIMER3";
-		groups = "TIMER3";
-	};
-
-	pinctrl_timer4_default: timer4_default {
-		function = "TIMER4";
-		groups = "TIMER4";
-	};
-
-	pinctrl_timer5_default: timer5_default {
-		function = "TIMER5";
-		groups = "TIMER5";
-	};
-
-	pinctrl_timer6_default: timer6_default {
-		function = "TIMER6";
-		groups = "TIMER6";
-	};
-
-	pinctrl_timer7_default: timer7_default {
-		function = "TIMER7";
-		groups = "TIMER7";
-	};
-
-	pinctrl_timer8_default: timer8_default {
-		function = "TIMER8";
-		groups = "TIMER8";
-	};
-
-	pinctrl_txd1_default: txd1_default {
-		function = "TXD1";
-		groups = "TXD1";
-	};
-
-	pinctrl_txd2_default: txd2_default {
-		function = "TXD2";
-		groups = "TXD2";
-	};
-
-	pinctrl_txd3_default: txd3_default {
-		function = "TXD3";
-		groups = "TXD3";
-	};
-
-	pinctrl_txd4_default: txd4_default {
-		function = "TXD4";
-		groups = "TXD4";
-	};
-
-	pinctrl_uart6_default: uart6_default {
-		function = "UART6";
-		groups = "UART6";
-	};
-
-	pinctrl_usbcki_default: usbcki_default {
-		function = "USBCKI";
-		groups = "USBCKI";
-	};
-
-	pinctrl_usb2ah_default: usb2ah_default {
-		function = "USB2AH";
-		groups = "USB2AH";
-	};
-
-	pinctrl_usb2ad_default: usb2ad_default {
-		function = "USB2AD";
-		groups = "USB2AD";
-	};
-
-	pinctrl_usb11bhid_default: usb11bhid_default {
-		function = "USB11BHID";
-		groups = "USB11BHID";
-	};
-
-	pinctrl_usb2bh_default: usb2bh_default {
-		function = "USB2BH";
-		groups = "USB2BH";
-	};
-
-	pinctrl_vgabiosrom_default: vgabiosrom_default {
-		function = "VGABIOSROM";
-		groups = "VGABIOSROM";
-	};
-
-	pinctrl_vgahs_default: vgahs_default {
-		function = "VGAHS";
-		groups = "VGAHS";
-	};
-
-	pinctrl_vgavs_default: vgavs_default {
-		function = "VGAVS";
-		groups = "VGAVS";
-	};
-
-	pinctrl_vpi24_default: vpi24_default {
-		function = "VPI24";
-		groups = "VPI24";
-	};
-
-	pinctrl_vpo_default: vpo_default {
-		function = "VPO";
-		groups = "VPO";
-	};
-
-	pinctrl_wdtrst1_default: wdtrst1_default {
-		function = "WDTRST1";
-		groups = "WDTRST1";
-	};
-
-	pinctrl_wdtrst2_default: wdtrst2_default {
-		function = "WDTRST2";
-		groups = "WDTRST2";
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
deleted file mode 100644
index 7cd4f075e3250..0000000000000
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ /dev/null
@@ -1,1184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2019 IBM Corp.
-
-&pinctrl {
-	pinctrl_adc0_default: adc0_default {
-		function = "ADC0";
-		groups = "ADC0";
-	};
-
-	pinctrl_adc1_default: adc1_default {
-		function = "ADC1";
-		groups = "ADC1";
-	};
-
-	pinctrl_adc10_default: adc10_default {
-		function = "ADC10";
-		groups = "ADC10";
-	};
-
-	pinctrl_adc11_default: adc11_default {
-		function = "ADC11";
-		groups = "ADC11";
-	};
-
-	pinctrl_adc12_default: adc12_default {
-		function = "ADC12";
-		groups = "ADC12";
-	};
-
-	pinctrl_adc13_default: adc13_default {
-		function = "ADC13";
-		groups = "ADC13";
-	};
-
-	pinctrl_adc14_default: adc14_default {
-		function = "ADC14";
-		groups = "ADC14";
-	};
-
-	pinctrl_adc15_default: adc15_default {
-		function = "ADC15";
-		groups = "ADC15";
-	};
-
-	pinctrl_adc2_default: adc2_default {
-		function = "ADC2";
-		groups = "ADC2";
-	};
-
-	pinctrl_adc3_default: adc3_default {
-		function = "ADC3";
-		groups = "ADC3";
-	};
-
-	pinctrl_adc4_default: adc4_default {
-		function = "ADC4";
-		groups = "ADC4";
-	};
-
-	pinctrl_adc5_default: adc5_default {
-		function = "ADC5";
-		groups = "ADC5";
-	};
-
-	pinctrl_adc6_default: adc6_default {
-		function = "ADC6";
-		groups = "ADC6";
-	};
-
-	pinctrl_adc7_default: adc7_default {
-		function = "ADC7";
-		groups = "ADC7";
-	};
-
-	pinctrl_adc8_default: adc8_default {
-		function = "ADC8";
-		groups = "ADC8";
-	};
-
-	pinctrl_adc9_default: adc9_default {
-		function = "ADC9";
-		groups = "ADC9";
-	};
-
-	pinctrl_bmcint_default: bmcint_default {
-		function = "BMCINT";
-		groups = "BMCINT";
-	};
-
-	pinctrl_espi_default: espi_default {
-		function = "ESPI";
-		groups = "ESPI";
-	};
-
-	pinctrl_espialt_default: espialt_default {
-		function = "ESPIALT";
-		groups = "ESPIALT";
-	};
-
-	pinctrl_fsi1_default: fsi1_default {
-		function = "FSI1";
-		groups = "FSI1";
-	};
-
-	pinctrl_fsi2_default: fsi2_default {
-		function = "FSI2";
-		groups = "FSI2";
-	};
-
-	pinctrl_fwspiabr_default: fwspiabr_default {
-		function = "FWSPIABR";
-		groups = "FWSPIABR";
-	};
-
-	pinctrl_fwspid_default: fwspid_default {
-		function = "FWSPID";
-		groups = "FWSPID";
-	};
-
-	pinctrl_fwqspi_default: fwqspi_default {
-		function = "FWQSPI";
-		groups = "FWQSPI";
-	};
-
-	pinctrl_fwspiwp_default: fwspiwp_default {
-		function = "FWSPIWP";
-		groups = "FWSPIWP";
-	};
-
-	pinctrl_gpit0_default: gpit0_default {
-		function = "GPIT0";
-		groups = "GPIT0";
-	};
-
-	pinctrl_gpit1_default: gpit1_default {
-		function = "GPIT1";
-		groups = "GPIT1";
-	};
-
-	pinctrl_gpit2_default: gpit2_default {
-		function = "GPIT2";
-		groups = "GPIT2";
-	};
-
-	pinctrl_gpit3_default: gpit3_default {
-		function = "GPIT3";
-		groups = "GPIT3";
-	};
-
-	pinctrl_gpit4_default: gpit4_default {
-		function = "GPIT4";
-		groups = "GPIT4";
-	};
-
-	pinctrl_gpit5_default: gpit5_default {
-		function = "GPIT5";
-		groups = "GPIT5";
-	};
-
-	pinctrl_gpit6_default: gpit6_default {
-		function = "GPIT6";
-		groups = "GPIT6";
-	};
-
-	pinctrl_gpit7_default: gpit7_default {
-		function = "GPIT7";
-		groups = "GPIT7";
-	};
-
-	pinctrl_gpiu0_default: gpiu0_default {
-		function = "GPIU0";
-		groups = "GPIU0";
-	};
-
-	pinctrl_gpiu1_default: gpiu1_default {
-		function = "GPIU1";
-		groups = "GPIU1";
-	};
-
-	pinctrl_gpiu2_default: gpiu2_default {
-		function = "GPIU2";
-		groups = "GPIU2";
-	};
-
-	pinctrl_gpiu3_default: gpiu3_default {
-		function = "GPIU3";
-		groups = "GPIU3";
-	};
-
-	pinctrl_gpiu4_default: gpiu4_default {
-		function = "GPIU4";
-		groups = "GPIU4";
-	};
-
-	pinctrl_gpiu5_default: gpiu5_default {
-		function = "GPIU5";
-		groups = "GPIU5";
-	};
-
-	pinctrl_gpiu6_default: gpiu6_default {
-		function = "GPIU6";
-		groups = "GPIU6";
-	};
-
-	pinctrl_gpiu7_default: gpiu7_default {
-		function = "GPIU7";
-		groups = "GPIU7";
-	};
-
-	pinctrl_hvi3c3_default: hvi3c3_default {
-		function = "I3C3";
-		groups = "HVI3C3";
-	};
-
-	pinctrl_hvi3c4_default: hvi3c4_default {
-		function = "I3C4";
-		groups = "HVI3C4";
-	};
-
-	pinctrl_i2c1_default: i2c1_default {
-		function = "I2C1";
-		groups = "I2C1";
-	};
-
-	pinctrl_i2c10_default: i2c10_default {
-		function = "I2C10";
-		groups = "I2C10";
-	};
-
-	pinctrl_i2c11_default: i2c11_default {
-		function = "I2C11";
-		groups = "I2C11";
-	};
-
-	pinctrl_i2c12_default: i2c12_default {
-		function = "I2C12";
-		groups = "I2C12";
-	};
-
-	pinctrl_i2c13_default: i2c13_default {
-		function = "I2C13";
-		groups = "I2C13";
-	};
-
-	pinctrl_i2c14_default: i2c14_default {
-		function = "I2C14";
-		groups = "I2C14";
-	};
-
-	pinctrl_i2c15_default: i2c15_default {
-		function = "I2C15";
-		groups = "I2C15";
-	};
-
-	pinctrl_i2c16_default: i2c16_default {
-		function = "I2C16";
-		groups = "I2C16";
-	};
-
-	pinctrl_i2c2_default: i2c2_default {
-		function = "I2C2";
-		groups = "I2C2";
-	};
-
-	pinctrl_i2c3_default: i2c3_default {
-		function = "I2C3";
-		groups = "I2C3";
-	};
-
-	pinctrl_i2c4_default: i2c4_default {
-		function = "I2C4";
-		groups = "I2C4";
-	};
-
-	pinctrl_i2c5_default: i2c5_default {
-		function = "I2C5";
-		groups = "I2C5";
-	};
-
-	pinctrl_i2c6_default: i2c6_default {
-		function = "I2C6";
-		groups = "I2C6";
-	};
-
-	pinctrl_i2c7_default: i2c7_default {
-		function = "I2C7";
-		groups = "I2C7";
-	};
-
-	pinctrl_i2c8_default: i2c8_default {
-		function = "I2C8";
-		groups = "I2C8";
-	};
-
-	pinctrl_i2c9_default: i2c9_default {
-		function = "I2C9";
-		groups = "I2C9";
-	};
-
-	pinctrl_i3c3_default: i3c3_default {
-		function = "I3C3";
-		groups = "I3C3";
-	};
-
-	pinctrl_i3c4_default: i3c4_default {
-		function = "I3C4";
-		groups = "I3C4";
-	};
-
-	pinctrl_i3c5_default: i3c5_default {
-		function = "I3C5";
-		groups = "I3C5";
-	};
-
-	pinctrl_i3c6_default: i3c6_default {
-		function = "I3C6";
-		groups = "I3C6";
-	};
-
-	pinctrl_jtagm_default: jtagm_default {
-		function = "JTAGM";
-		groups = "JTAGM";
-	};
-
-	pinctrl_lhpd_default: lhpd_default {
-		function = "LHPD";
-		groups = "LHPD";
-	};
-
-	pinctrl_lhsirq_default: lhsirq_default {
-		function = "LHSIRQ";
-		groups = "LHSIRQ";
-	};
-
-	pinctrl_lpc_default: lpc_default {
-		function = "LPC";
-		groups = "LPC";
-	};
-
-	pinctrl_lpchc_default: lpchc_default {
-		function = "LPCHC";
-		groups = "LPCHC";
-	};
-
-	pinctrl_lpcpd_default: lpcpd_default {
-		function = "LPCPD";
-		groups = "LPCPD";
-	};
-
-	pinctrl_lpcpme_default: lpcpme_default {
-		function = "LPCPME";
-		groups = "LPCPME";
-	};
-
-	pinctrl_lpcsmi_default: lpcsmi_default {
-		function = "LPCSMI";
-		groups = "LPCSMI";
-	};
-
-	pinctrl_lsirq_default: lsirq_default {
-		function = "LSIRQ";
-		groups = "LSIRQ";
-	};
-
-	pinctrl_maclink1_default: maclink1_default {
-		function = "MACLINK1";
-		groups = "MACLINK1";
-	};
-
-	pinctrl_maclink2_default: maclink2_default {
-		function = "MACLINK2";
-		groups = "MACLINK2";
-	};
-
-	pinctrl_maclink3_default: maclink3_default {
-		function = "MACLINK3";
-		groups = "MACLINK3";
-	};
-
-	pinctrl_maclink4_default: maclink4_default {
-		function = "MACLINK4";
-		groups = "MACLINK4";
-	};
-
-	pinctrl_mdio1_default: mdio1_default {
-		function = "MDIO1";
-		groups = "MDIO1";
-	};
-
-	pinctrl_mdio2_default: mdio2_default {
-		function = "MDIO2";
-		groups = "MDIO2";
-	};
-
-	pinctrl_mdio3_default: mdio3_default {
-		function = "MDIO3";
-		groups = "MDIO3";
-	};
-
-	pinctrl_mdio4_default: mdio4_default {
-		function = "MDIO4";
-		groups = "MDIO4";
-	};
-
-	pinctrl_ncts1_default: ncts1_default {
-		function = "NCTS1";
-		groups = "NCTS1";
-	};
-
-	pinctrl_ncts2_default: ncts2_default {
-		function = "NCTS2";
-		groups = "NCTS2";
-	};
-
-	pinctrl_ncts3_default: ncts3_default {
-		function = "NCTS3";
-		groups = "NCTS3";
-	};
-
-	pinctrl_ncts4_default: ncts4_default {
-		function = "NCTS4";
-		groups = "NCTS4";
-	};
-
-	pinctrl_ndcd1_default: ndcd1_default {
-		function = "NDCD1";
-		groups = "NDCD1";
-	};
-
-	pinctrl_ndcd2_default: ndcd2_default {
-		function = "NDCD2";
-		groups = "NDCD2";
-	};
-
-	pinctrl_ndcd3_default: ndcd3_default {
-		function = "NDCD3";
-		groups = "NDCD3";
-	};
-
-	pinctrl_ndcd4_default: ndcd4_default {
-		function = "NDCD4";
-		groups = "NDCD4";
-	};
-
-	pinctrl_ndsr1_default: ndsr1_default {
-		function = "NDSR1";
-		groups = "NDSR1";
-	};
-
-	pinctrl_ndsr2_default: ndsr2_default {
-		function = "NDSR2";
-		groups = "NDSR2";
-	};
-
-	pinctrl_ndsr3_default: ndsr3_default {
-		function = "NDSR3";
-		groups = "NDSR3";
-	};
-
-	pinctrl_ndsr4_default: ndsr4_default {
-		function = "NDSR4";
-		groups = "NDSR4";
-	};
-
-	pinctrl_ndtr1_default: ndtr1_default {
-		function = "NDTR1";
-		groups = "NDTR1";
-	};
-
-	pinctrl_ndtr2_default: ndtr2_default {
-		function = "NDTR2";
-		groups = "NDTR2";
-	};
-
-	pinctrl_ndtr3_default: ndtr3_default {
-		function = "NDTR3";
-		groups = "NDTR3";
-	};
-
-	pinctrl_ndtr4_default: ndtr4_default {
-		function = "NDTR4";
-		groups = "NDTR4";
-	};
-
-	pinctrl_nri1_default: nri1_default {
-		function = "NRI1";
-		groups = "NRI1";
-	};
-
-	pinctrl_nri2_default: nri2_default {
-		function = "NRI2";
-		groups = "NRI2";
-	};
-
-	pinctrl_nri3_default: nri3_default {
-		function = "NRI3";
-		groups = "NRI3";
-	};
-
-	pinctrl_nri4_default: nri4_default {
-		function = "NRI4";
-		groups = "NRI4";
-	};
-
-	pinctrl_nrts1_default: nrts1_default {
-		function = "NRTS1";
-		groups = "NRTS1";
-	};
-
-	pinctrl_nrts2_default: nrts2_default {
-		function = "NRTS2";
-		groups = "NRTS2";
-	};
-
-	pinctrl_nrts3_default: nrts3_default {
-		function = "NRTS3";
-		groups = "NRTS3";
-	};
-
-	pinctrl_nrts4_default: nrts4_default {
-		function = "NRTS4";
-		groups = "NRTS4";
-	};
-
-	pinctrl_oscclk_default: oscclk_default {
-		function = "OSCCLK";
-		groups = "OSCCLK";
-	};
-
-	pinctrl_pewake_default: pewake_default {
-		function = "PEWAKE";
-		groups = "PEWAKE";
-	};
-
-	pinctrl_pwm0_default: pwm0_default {
-		function = "PWM0";
-		groups = "PWM0";
-	};
-
-	pinctrl_pwm1_default: pwm1_default {
-		function = "PWM1";
-		groups = "PWM1";
-	};
-
-	pinctrl_pwm10g0_default: pwm10g0_default {
-		function = "PWM10";
-		groups = "PWM10G0";
-	};
-
-	pinctrl_pwm10g1_default: pwm10g1_default {
-		function = "PWM10";
-		groups = "PWM10G1";
-	};
-
-	pinctrl_pwm11g0_default: pwm11g0_default {
-		function = "PWM11";
-		groups = "PWM11G0";
-	};
-
-	pinctrl_pwm11g1_default: pwm11g1_default {
-		function = "PWM11";
-		groups = "PWM11G1";
-	};
-
-	pinctrl_pwm12g0_default: pwm12g0_default {
-		function = "PWM12";
-		groups = "PWM12G0";
-	};
-
-	pinctrl_pwm12g1_default: pwm12g1_default {
-		function = "PWM12";
-		groups = "PWM12G1";
-	};
-
-	pinctrl_pwm13g0_default: pwm13g0_default {
-		function = "PWM13";
-		groups = "PWM13G0";
-	};
-
-	pinctrl_pwm13g1_default: pwm13g1_default {
-		function = "PWM13";
-		groups = "PWM13G1";
-	};
-
-	pinctrl_pwm14g0_default: pwm14g0_default {
-		function = "PWM14";
-		groups = "PWM14G0";
-	};
-
-	pinctrl_pwm14g1_default: pwm14g1_default {
-		function = "PWM14";
-		groups = "PWM14G1";
-	};
-
-	pinctrl_pwm15g0_default: pwm15g0_default {
-		function = "PWM15";
-		groups = "PWM15G0";
-	};
-
-	pinctrl_pwm15g1_default: pwm15g1_default {
-		function = "PWM15";
-		groups = "PWM15G1";
-	};
-
-	pinctrl_pwm2_default: pwm2_default {
-		function = "PWM2";
-		groups = "PWM2";
-	};
-
-	pinctrl_pwm3_default: pwm3_default {
-		function = "PWM3";
-		groups = "PWM3";
-	};
-
-	pinctrl_pwm4_default: pwm4_default {
-		function = "PWM4";
-		groups = "PWM4";
-	};
-
-	pinctrl_pwm5_default: pwm5_default {
-		function = "PWM5";
-		groups = "PWM5";
-	};
-
-	pinctrl_pwm6_default: pwm6_default {
-		function = "PWM6";
-		groups = "PWM6";
-	};
-
-	pinctrl_pwm7_default: pwm7_default {
-		function = "PWM7";
-		groups = "PWM7";
-	};
-
-	pinctrl_pwm8g0_default: pwm8g0_default {
-		function = "PWM8";
-		groups = "PWM8G0";
-	};
-
-	pinctrl_pwm8g1_default: pwm8g1_default {
-		function = "PWM8";
-		groups = "PWM8G1";
-	};
-
-	pinctrl_pwm9g0_default: pwm9g0_default {
-		function = "PWM9";
-		groups = "PWM9G0";
-	};
-
-	pinctrl_pwm9g1_default: pwm9g1_default {
-		function = "PWM9";
-		groups = "PWM9G1";
-	};
-
-	pinctrl_qspi1_default: qspi1_default {
-		function = "SPI1";
-		groups = "QSPI1";
-	};
-
-	pinctrl_qspi2_default: qspi2_default {
-		function = "SPI2";
-		groups = "QSPI2";
-	};
-
-	pinctrl_rgmii1_default: rgmii1_default {
-		function = "RGMII1";
-		groups = "RGMII1";
-	};
-
-	pinctrl_rgmii2_default: rgmii2_default {
-		function = "RGMII2";
-		groups = "RGMII2";
-	};
-
-	pinctrl_rgmii3_default: rgmii3_default {
-		function = "RGMII3";
-		groups = "RGMII3";
-	};
-
-	pinctrl_rgmii4_default: rgmii4_default {
-		function = "RGMII4";
-		groups = "RGMII4";
-	};
-
-	pinctrl_rmii1_default: rmii1_default {
-		function = "RMII1";
-		groups = "RMII1";
-	};
-
-	pinctrl_rmii2_default: rmii2_default {
-		function = "RMII2";
-		groups = "RMII2";
-	};
-
-	pinctrl_rmii3_default: rmii3_default {
-		function = "RMII3";
-		groups = "RMII3";
-	};
-
-	pinctrl_rmii4_default: rmii4_default {
-		function = "RMII4";
-		groups = "RMII4";
-	};
-
-	pinctrl_rxd1_default: rxd1_default {
-		function = "RXD1";
-		groups = "RXD1";
-	};
-
-	pinctrl_rxd2_default: rxd2_default {
-		function = "RXD2";
-		groups = "RXD2";
-	};
-
-	pinctrl_rxd3_default: rxd3_default {
-		function = "RXD3";
-		groups = "RXD3";
-	};
-
-	pinctrl_rxd4_default: rxd4_default {
-		function = "RXD4";
-		groups = "RXD4";
-	};
-
-	pinctrl_salt1_default: salt1_default {
-		function = "SALT1";
-		groups = "SALT1";
-	};
-
-	pinctrl_salt10g0_default: salt10g0_default {
-		function = "SALT10";
-		groups = "SALT10G0";
-	};
-
-	pinctrl_salt10g1_default: salt10g1_default {
-		function = "SALT10";
-		groups = "SALT10G1";
-	};
-
-	pinctrl_salt11g0_default: salt11g0_default {
-		function = "SALT11";
-		groups = "SALT11G0";
-	};
-
-	pinctrl_salt11g1_default: salt11g1_default {
-		function = "SALT11";
-		groups = "SALT11G1";
-	};
-
-	pinctrl_salt12g0_default: salt12g0_default {
-		function = "SALT12";
-		groups = "SALT12G0";
-	};
-
-	pinctrl_salt12g1_default: salt12g1_default {
-		function = "SALT12";
-		groups = "SALT12G1";
-	};
-
-	pinctrl_salt13g0_default: salt13g0_default {
-		function = "SALT13";
-		groups = "SALT13G0";
-	};
-
-	pinctrl_salt13g1_default: salt13g1_default {
-		function = "SALT13";
-		groups = "SALT13G1";
-	};
-
-	pinctrl_salt14g0_default: salt14g0_default {
-		function = "SALT14";
-		groups = "SALT14G0";
-	};
-
-	pinctrl_salt14g1_default: salt14g1_default {
-		function = "SALT14";
-		groups = "SALT14G1";
-	};
-
-	pinctrl_salt15g0_default: salt15g0_default {
-		function = "SALT15";
-		groups = "SALT15G0";
-	};
-
-	pinctrl_salt15g1_default: salt15g1_default {
-		function = "SALT15";
-		groups = "SALT15G1";
-	};
-
-	pinctrl_salt16g0_default: salt16g0_default {
-		function = "SALT16";
-		groups = "SALT16G0";
-	};
-
-	pinctrl_salt16g1_default: salt16g1_default {
-		function = "SALT16";
-		groups = "SALT16G1";
-	};
-
-	pinctrl_salt2_default: salt2_default {
-		function = "SALT2";
-		groups = "SALT2";
-	};
-
-	pinctrl_salt3_default: salt3_default {
-		function = "SALT3";
-		groups = "SALT3";
-	};
-
-	pinctrl_salt4_default: salt4_default {
-		function = "SALT4";
-		groups = "SALT4";
-	};
-
-	pinctrl_salt5_default: salt5_default {
-		function = "SALT5";
-		groups = "SALT5";
-	};
-
-	pinctrl_salt6_default: salt6_default {
-		function = "SALT6";
-		groups = "SALT6";
-	};
-
-	pinctrl_salt7_default: salt7_default {
-		function = "SALT7";
-		groups = "SALT7";
-	};
-
-	pinctrl_salt8_default: salt8_default {
-		function = "SALT8";
-		groups = "SALT8";
-	};
-
-	pinctrl_salt9g0_default: salt9g0_default {
-		function = "SALT9";
-		groups = "SALT9G0";
-	};
-
-	pinctrl_salt9g1_default: salt9g1_default {
-		function = "SALT9";
-		groups = "SALT9G1";
-	};
-
-	pinctrl_sd1_default: sd1_default {
-		function = "SD1";
-		groups = "SD1";
-	};
-
-	pinctrl_sd2_default: sd2_default {
-		function = "SD2";
-		groups = "SD2";
-	};
-
-	pinctrl_emmc_default: emmc_default {
-		function = "EMMC";
-		groups = "EMMCG4";
-	};
-
-	pinctrl_sgpm1_default: sgpm1_default {
-		function = "SGPM1";
-		groups = "SGPM1";
-	};
-
-	pinctrl_sgpm2_default: sgpm2_default {
-		function = "SGPM2";
-		groups = "SGPM2";
-	};
-
-	pinctrl_sgps1_default: sgps1_default {
-		function = "SGPS1";
-		groups = "SGPS1";
-	};
-
-	pinctrl_sgps2_default: sgps2_default {
-		function = "SGPS2";
-		groups = "SGPS2";
-	};
-
-	pinctrl_sioonctrl_default: sioonctrl_default {
-		function = "SIOONCTRL";
-		groups = "SIOONCTRL";
-	};
-
-	pinctrl_siopbi_default: siopbi_default {
-		function = "SIOPBI";
-		groups = "SIOPBI";
-	};
-
-	pinctrl_siopbo_default: siopbo_default {
-		function = "SIOPBO";
-		groups = "SIOPBO";
-	};
-
-	pinctrl_siopwreq_default: siopwreq_default {
-		function = "SIOPWREQ";
-		groups = "SIOPWREQ";
-	};
-
-	pinctrl_siopwrgd_default: siopwrgd_default {
-		function = "SIOPWRGD";
-		groups = "SIOPWRGD";
-	};
-
-	pinctrl_sios3_default: sios3_default {
-		function = "SIOS3";
-		groups = "SIOS3";
-	};
-
-	pinctrl_sios5_default: sios5_default {
-		function = "SIOS5";
-		groups = "SIOS5";
-	};
-
-	pinctrl_siosci_default: siosci_default {
-		function = "SIOSCI";
-		groups = "SIOSCI";
-	};
-
-	pinctrl_spi1_default: spi1_default {
-		function = "SPI1";
-		groups = "SPI1";
-	};
-
-	pinctrl_spi1abr_default: spi1abr_default {
-		function = "SPI1ABR";
-		groups = "SPI1ABR";
-	};
-
-	pinctrl_spi1cs1_default: spi1cs1_default {
-		function = "SPI1CS1";
-		groups = "SPI1CS1";
-	};
-
-	pinctrl_spi1wp_default: spi1wp_default {
-		function = "SPI1WP";
-		groups = "SPI1WP";
-	};
-
-	pinctrl_spi2_default: spi2_default {
-		function = "SPI2";
-		groups = "SPI2";
-	};
-
-	pinctrl_spi2cs1_default: spi2cs1_default {
-		function = "SPI2CS1";
-		groups = "SPI2CS1";
-	};
-
-	pinctrl_spi2cs2_default: spi2cs2_default {
-		function = "SPI2CS2";
-		groups = "SPI2CS2";
-	};
-
-	pinctrl_tach0_default: tach0_default {
-		function = "TACH0";
-		groups = "TACH0";
-	};
-
-	pinctrl_tach1_default: tach1_default {
-		function = "TACH1";
-		groups = "TACH1";
-	};
-
-	pinctrl_tach10_default: tach10_default {
-		function = "TACH10";
-		groups = "TACH10";
-	};
-
-	pinctrl_tach11_default: tach11_default {
-		function = "TACH11";
-		groups = "TACH11";
-	};
-
-	pinctrl_tach12_default: tach12_default {
-		function = "TACH12";
-		groups = "TACH12";
-	};
-
-	pinctrl_tach13_default: tach13_default {
-		function = "TACH13";
-		groups = "TACH13";
-	};
-
-	pinctrl_tach14_default: tach14_default {
-		function = "TACH14";
-		groups = "TACH14";
-	};
-
-	pinctrl_tach15_default: tach15_default {
-		function = "TACH15";
-		groups = "TACH15";
-	};
-
-	pinctrl_tach2_default: tach2_default {
-		function = "TACH2";
-		groups = "TACH2";
-	};
-
-	pinctrl_tach3_default: tach3_default {
-		function = "TACH3";
-		groups = "TACH3";
-	};
-
-	pinctrl_tach4_default: tach4_default {
-		function = "TACH4";
-		groups = "TACH4";
-	};
-
-	pinctrl_tach5_default: tach5_default {
-		function = "TACH5";
-		groups = "TACH5";
-	};
-
-	pinctrl_tach6_default: tach6_default {
-		function = "TACH6";
-		groups = "TACH6";
-	};
-
-	pinctrl_tach7_default: tach7_default {
-		function = "TACH7";
-		groups = "TACH7";
-	};
-
-	pinctrl_tach8_default: tach8_default {
-		function = "TACH8";
-		groups = "TACH8";
-	};
-
-	pinctrl_tach9_default: tach9_default {
-		function = "TACH9";
-		groups = "TACH9";
-	};
-
-	pinctrl_thru0_default: thru0_default {
-		function = "THRU0";
-		groups = "THRU0";
-	};
-
-	pinctrl_thru1_default: thru1_default {
-		function = "THRU1";
-		groups = "THRU1";
-	};
-
-	pinctrl_thru2_default: thru2_default {
-		function = "THRU2";
-		groups = "THRU2";
-	};
-
-	pinctrl_thru3_default: thru3_default {
-		function = "THRU3";
-		groups = "THRU3";
-	};
-
-	pinctrl_txd1_default: txd1_default {
-		function = "TXD1";
-		groups = "TXD1";
-	};
-
-	pinctrl_txd2_default: txd2_default {
-		function = "TXD2";
-		groups = "TXD2";
-	};
-
-	pinctrl_txd3_default: txd3_default {
-		function = "TXD3";
-		groups = "TXD3";
-	};
-
-	pinctrl_txd4_default: txd4_default {
-		function = "TXD4";
-		groups = "TXD4";
-	};
-
-	pinctrl_uart10_default: uart10_default {
-		function = "UART10";
-		groups = "UART10";
-	};
-
-	pinctrl_uart11_default: uart11_default {
-		function = "UART11";
-		groups = "UART11";
-	};
-
-	pinctrl_uart12g0_default: uart12g0_default {
-		function = "UART12";
-		groups = "UART12G0";
-	};
-
-	pinctrl_uart12g1_default: uart12g1_default {
-		function = "UART12";
-		groups = "UART12G1";
-	};
-
-	pinctrl_uart13g0_default: uart13g0_default {
-		function = "UART13";
-		groups = "UART13G0";
-	};
-
-	pinctrl_uart13g1_default: uart13g1_default {
-		function = "UART13";
-		groups = "UART13G1";
-	};
-
-	pinctrl_uart6_default: uart6_default {
-		function = "UART6";
-		groups = "UART6";
-	};
-
-	pinctrl_uart7_default: uart7_default {
-		function = "UART7";
-		groups = "UART7";
-	};
-
-	pinctrl_uart8_default: uart8_default {
-		function = "UART8";
-		groups = "UART8";
-	};
-
-	pinctrl_uart9_default: uart9_default {
-		function = "UART9";
-		groups = "UART9";
-	};
-
-	pinctrl_usb2ah_default: usb2ah_default {
-		function = "USB2AH";
-		groups = "USBA";
-	};
-
-	pinctrl_usb2ad_default: usb2ad_default {
-		function = "USB2AD";
-		groups = "USBA";
-	};
-
-	pinctrl_usb2bh_default: usb2bh_default {
-		function = "USB2BH";
-		groups = "USBB";
-	};
-
-	pinctrl_usb2bd_default: usb2bd_default {
-		function = "USB2BD";
-		groups = "USBB";
-	};
-
-	pinctrl_usb11bhid_default: usb11bhid_default {
-		function = "USB11BHID";
-		groups = "USBB";
-	};
-
-	pinctrl_vb_default: vb_default {
-		function = "VB";
-		groups = "VB";
-	};
-
-	pinctrl_vgahs_default: vgahs_default {
-		function = "VGAHS";
-		groups = "VGAHS";
-	};
-
-	pinctrl_vgavs_default: vgavs_default {
-		function = "VGAVS";
-		groups = "VGAVS";
-	};
-
-	pinctrl_wdtrst1_default: wdtrst1_default {
-		function = "WDTRST1";
-		groups = "WDTRST1";
-	};
-
-	pinctrl_wdtrst2_default: wdtrst2_default {
-		function = "WDTRST2";
-		groups = "WDTRST2";
-	};
-
-	pinctrl_wdtrst3_default: wdtrst3_default {
-		function = "WDTRST3";
-		groups = "WDTRST3";
-	};
-
-	pinctrl_wdtrst4_default: wdtrst4_default {
-		function = "WDTRST4";
-		groups = "WDTRST4";
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
deleted file mode 100644
index 172dd748d8076..0000000000000
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ /dev/null
@@ -1,1121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2019 IBM Corp.
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
-#include <dt-bindings/clock/ast2600-clock.h>
-
-/ {
-	model = "Aspeed BMC";
-	compatible = "aspeed,ast2600";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		i2c8 = &i2c8;
-		i2c9 = &i2c9;
-		i2c10 = &i2c10;
-		i2c11 = &i2c11;
-		i2c12 = &i2c12;
-		i2c13 = &i2c13;
-		i2c14 = &i2c14;
-		i2c15 = &i2c15;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &vuart1;
-		serial6 = &vuart2;
-		mdio0 = &mdio0;
-		mdio1 = &mdio1;
-		mdio2 = &mdio2;
-		mdio3 = &mdio3;
-	};
-
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "aspeed,ast2600-smp";
-
-		cpu@f00 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0xf00>;
-		};
-
-		cpu@f01 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0xf01>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-		clocks = <&syscon ASPEED_CLK_HPLL>;
-		arm,cpu-registers-not-fw-configured;
-		always-on;
-	};
-
-	edac: sdram@1e6e0000 {
-		compatible = "aspeed,ast2600-sdram-edac", "syscon";
-		reg = <0x1e6e0000 0x174>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges;
-
-		gic: interrupt-controller@40461000 {
-			compatible = "arm,cortex-a7-gic";
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			reg = <0x40461000 0x1000>,
-			    <0x40462000 0x1000>,
-			    <0x40464000 0x2000>,
-			    <0x40466000 0x2000>;
-			};
-
-		ahbc: bus@1e600000 {
-			compatible = "aspeed,ast2600-ahbc", "syscon";
-			reg = <0x1e600000 0x100>;
-		};
-
-		fmc: spi@1e620000 {
-			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "aspeed,ast2600-fmc";
-			clocks = <&syscon ASPEED_CLK_AHB>;
-			status = "disabled";
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@1 {
-				reg = < 1 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@2 {
-				reg = < 2 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-		};
-
-		spi1: spi@1e630000 {
-			reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "aspeed,ast2600-spi";
-			clocks = <&syscon ASPEED_CLK_AHB>;
-			status = "disabled";
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@1 {
-				reg = < 1 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-		};
-
-		spi2: spi@1e631000 {
-			reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "aspeed,ast2600-spi";
-			clocks = <&syscon ASPEED_CLK_AHB>;
-			status = "disabled";
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@1 {
-				reg = < 1 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@2 {
-				reg = < 2 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-		};
-
-		mdio0: mdio@1e650000 {
-			compatible = "aspeed,ast2600-mdio";
-			reg = <0x1e650000 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_mdio1_default>;
-			resets = <&syscon ASPEED_RESET_MII>;
-		};
-
-		mdio1: mdio@1e650008 {
-			compatible = "aspeed,ast2600-mdio";
-			reg = <0x1e650008 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_mdio2_default>;
-			resets = <&syscon ASPEED_RESET_MII>;
-		};
-
-		mdio2: mdio@1e650010 {
-			compatible = "aspeed,ast2600-mdio";
-			reg = <0x1e650010 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_mdio3_default>;
-			resets = <&syscon ASPEED_RESET_MII>;
-		};
-
-		mdio3: mdio@1e650018 {
-			compatible = "aspeed,ast2600-mdio";
-			reg = <0x1e650018 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_mdio4_default>;
-			resets = <&syscon ASPEED_RESET_MII>;
-		};
-
-		mac0: ftgmac@1e660000 {
-			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
-			reg = <0x1e660000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
-			status = "disabled";
-		};
-
-		mac1: ftgmac@1e680000 {
-			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
-			reg = <0x1e680000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
-			status = "disabled";
-		};
-
-		mac2: ftgmac@1e670000 {
-			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
-			reg = <0x1e670000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
-			status = "disabled";
-		};
-
-		mac3: ftgmac@1e690000 {
-			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
-			reg = <0x1e690000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
-			status = "disabled";
-		};
-
-		ehci0: usb@1e6a1000 {
-			compatible = "aspeed,ast2600-ehci", "generic-ehci";
-			reg = <0x1e6a1000 0x100>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2ah_default>;
-			status = "disabled";
-		};
-
-		ehci1: usb@1e6a3000 {
-			compatible = "aspeed,ast2600-ehci", "generic-ehci";
-			reg = <0x1e6a3000 0x100>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2bh_default>;
-			status = "disabled";
-		};
-
-		uhci: usb@1e6b0000 {
-			compatible = "aspeed,ast2600-uhci", "generic-uhci";
-			reg = <0x1e6b0000 0x100>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			#ports = <2>;
-			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
-			status = "disabled";
-			/*
-			 * No default pinmux, it will follow EHCI, use an
-			 * explicit pinmux override if EHCI is not enabled.
-			 */
-		};
-
-		vhub: usb-vhub@1e6a0000 {
-			compatible = "aspeed,ast2600-usb-vhub";
-			reg = <0x1e6a0000 0x350>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
-			aspeed,vhub-downstream-ports = <7>;
-			aspeed,vhub-generic-endpoints = <21>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2ad_default>;
-			status = "disabled";
-		};
-
-		udc: usb@1e6a2000 {
-			compatible = "aspeed,ast2600-udc";
-			reg = <0x1e6a2000 0x300>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2bd_default>;
-			status = "disabled";
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			hace: crypto@1e6d0000 {
-				compatible = "aspeed,ast2600-hace";
-				reg = <0x1e6d0000 0x200>;
-				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
-				resets = <&syscon ASPEED_RESET_HACE>;
-			};
-
-			syscon: syscon@1e6e2000 {
-				compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
-				reg = <0x1e6e2000 0x1000>;
-				ranges = <0 0x1e6e2000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#clock-cells = <1>;
-				#reset-cells = <1>;
-
-				pinctrl: pinctrl {
-					compatible = "aspeed,ast2600-pinctrl";
-				};
-
-				silicon-id@14 {
-					compatible = "aspeed,ast2600-silicon-id", "aspeed,silicon-id";
-					reg = <0x14 0x4 0x5b0 0x8>;
-				};
-
-				smp-memram@180 {
-					compatible = "aspeed,ast2600-smpmem";
-					reg = <0x180 0x40>;
-				};
-
-				scu_ic0: interrupt-controller@560 {
-					#interrupt-cells = <1>;
-					compatible = "aspeed,ast2600-scu-ic0";
-					reg = <0x560 0x4>;
-					interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-controller;
-				};
-
-				scu_ic1: interrupt-controller@570 {
-					#interrupt-cells = <1>;
-					compatible = "aspeed,ast2600-scu-ic1";
-					reg = <0x570 0x4>;
-					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-controller;
-				};
-			};
-
-			rng: hwrng@1e6e2524 {
-				compatible = "timeriomem_rng";
-				reg = <0x1e6e2524 0x4>;
-				period = <1>;
-				quality = <100>;
-			};
-
-			gfx: display@1e6e6000 {
-				compatible = "aspeed,ast2600-gfx", "syscon";
-				reg = <0x1e6e6000 0x1000>;
-				reg-io-width = <4>;
-				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
-				resets = <&syscon ASPEED_RESET_GRAPHICS>;
-				syscon = <&syscon>;
-				status = "disabled";
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			xdma: xdma@1e6e7000 {
-				compatible = "aspeed,ast2600-xdma";
-				reg = <0x1e6e7000 0x100>;
-				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
-				resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
-				reset-names = "device", "root-complex";
-				interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-						      <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
-				aspeed,pcie-device = "bmc";
-				aspeed,scu = <&syscon>;
-				status = "disabled";
-			};
-
-			adc0: adc@1e6e9000 {
-				compatible = "aspeed,ast2600-adc0";
-				reg = <0x1e6e9000 0x100>;
-				clocks = <&syscon ASPEED_CLK_APB2>;
-				resets = <&syscon ASPEED_RESET_ADC>;
-				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-
-			adc1: adc@1e6e9100 {
-				compatible = "aspeed,ast2600-adc1";
-				reg = <0x1e6e9100 0x100>;
-				clocks = <&syscon ASPEED_CLK_APB2>;
-				resets = <&syscon ASPEED_RESET_ADC>;
-				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-
-			sbc: secure-boot-controller@1e6f2000 {
-				compatible = "aspeed,ast2600-sbc";
-				reg = <0x1e6f2000 0x1000>;
-			};
-
-			acry: crypto@1e6fa000 {
-				compatible = "aspeed,ast2600-acry";
-				reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
-				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
-				aspeed,ahbc = <&ahbc>;
-			};
-
-			video: video@1e700000 {
-				compatible = "aspeed,ast2600-video-engine";
-				reg = <0x1e700000 0x1000>;
-				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
-					 <&syscon ASPEED_CLK_GATE_ECLK>;
-				clock-names = "vclk", "eclk";
-				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			gpio0: gpio@1e780000 {
-				#gpio-cells = <2>;
-				gpio-controller;
-				compatible = "aspeed,ast2600-gpio";
-				reg = <0x1e780000 0x400>;
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-ranges = <&pinctrl 0 0 208>;
-				ngpios = <208>;
-				clocks = <&syscon ASPEED_CLK_APB2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			sgpiom0: sgpiom@1e780500 {
-				#gpio-cells = <2>;
-				gpio-controller;
-				compatible = "aspeed,ast2600-sgpiom";
-				reg = <0x1e780500 0x100>;
-				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_APB2>;
-				interrupt-controller;
-				bus-frequency = <12000000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_sgpm1_default>;
-				status = "disabled";
-			};
-
-			sgpiom1: sgpiom@1e780600 {
-				#gpio-cells = <2>;
-				gpio-controller;
-				compatible = "aspeed,ast2600-sgpiom";
-				reg = <0x1e780600 0x100>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_APB2>;
-				interrupt-controller;
-				bus-frequency = <12000000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_sgpm2_default>;
-				status = "disabled";
-			};
-
-			gpio1: gpio@1e780800 {
-				#gpio-cells = <2>;
-				gpio-controller;
-				compatible = "aspeed,ast2600-gpio";
-				reg = <0x1e780800 0x800>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-ranges = <&pinctrl 0 208 36>;
-				ngpios = <36>;
-				clocks = <&syscon ASPEED_CLK_APB1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			rtc: rtc@1e781000 {
-				compatible = "aspeed,ast2600-rtc";
-				reg = <0x1e781000 0x18>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			timer: timer@1e782000 {
-				compatible = "aspeed,ast2600-timer";
-				reg = <0x1e782000 0x90>;
-				interrupts-extended = <&gic  GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-						<&gic  GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-						<&gic  GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-						<&gic  GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-						<&gic  GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-						<&gic  GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-						<&gic  GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-						<&gic  GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_APB1>;
-				clock-names = "PCLK";
-				status = "disabled";
-                        };
-
-			uart1: serial@1e783000 {
-				compatible = "ns16550a";
-				reg = <0x1e783000 0x20>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
-				resets = <&lpc_reset 4>;
-				no-loopback-test;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
-				status = "disabled";
-			};
-
-			uart5: serial@1e784000 {
-				compatible = "ns16550a";
-				reg = <0x1e784000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
-				no-loopback-test;
-			};
-
-			wdt1: watchdog@1e785000 {
-				compatible = "aspeed,ast2600-wdt";
-				reg = <0x1e785000 0x40>;
-			};
-
-			wdt2: watchdog@1e785040 {
-				compatible = "aspeed,ast2600-wdt";
-				reg = <0x1e785040 0x40>;
-				status = "disabled";
-			};
-
-			wdt3: watchdog@1e785080 {
-				compatible = "aspeed,ast2600-wdt";
-				reg = <0x1e785080 0x40>;
-				status = "disabled";
-			};
-
-			wdt4: watchdog@1e7850c0 {
-				compatible = "aspeed,ast2600-wdt";
-				reg = <0x1e7850C0 0x40>;
-				status = "disabled";
-			};
-
-			peci0: peci-controller@1e78b000 {
-				compatible = "aspeed,ast2600-peci";
-				reg = <0x1e78b000 0x100>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
-				resets = <&syscon ASPEED_RESET_PECI>;
-				cmd-timeout-ms = <1000>;
-				clock-frequency = <1000000>;
-				status = "disabled";
-			};
-
-			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
-				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
-
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x1e789000 0x1000>;
-
-				kcs1: kcs@24 {
-					compatible = "aspeed,ast2500-kcs-bmc-v2";
-					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
-					interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					kcs_chan = <1>;
-					status = "disabled";
-				};
-
-				kcs2: kcs@28 {
-					compatible = "aspeed,ast2500-kcs-bmc-v2";
-					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
-					interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				kcs3: kcs@2c {
-					compatible = "aspeed,ast2500-kcs-bmc-v2";
-					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
-					interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				kcs4: kcs@114 {
-					compatible = "aspeed,ast2500-kcs-bmc-v2";
-					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
-					interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				lpc_ctrl: lpc-ctrl@80 {
-					compatible = "aspeed,ast2600-lpc-ctrl";
-					reg = <0x80 0x80>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				lpc_snoop: lpc-snoop@80 {
-					compatible = "aspeed,ast2600-lpc-snoop";
-					reg = <0x80 0x80>;
-					interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-
-				lhc: lhc@a0 {
-					compatible = "aspeed,ast2600-lhc";
-					reg = <0xa0 0x24 0xc8 0x8>;
-				};
-
-				lpc_reset: reset-controller@98 {
-					compatible = "aspeed,ast2600-lpc-reset";
-					reg = <0x98 0x4>;
-					#reset-cells = <1>;
-				};
-
-				uart_routing: uart-routing@98 {
-					compatible = "aspeed,ast2600-uart-routing";
-					reg = <0x98 0x8>;
-					status = "disabled";
-				};
-
-				ibt: ibt@140 {
-					compatible = "aspeed,ast2600-ibt-bmc";
-					reg = <0x140 0x18>;
-					interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-					status = "disabled";
-				};
-			};
-
-			sdc: sdc@1e740000 {
-				compatible = "aspeed,ast2600-sd-controller";
-				reg = <0x1e740000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1e740000 0x10000>;
-				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
-				status = "disabled";
-
-				sdhci0: sdhci@1e740100 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
-					reg = <0x100 0x100>;
-					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-					sdhci,auto-cmd12;
-					clocks = <&syscon ASPEED_CLK_SDIO>;
-					status = "disabled";
-				};
-
-				sdhci1: sdhci@1e740200 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
-					reg = <0x200 0x100>;
-					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-					sdhci,auto-cmd12;
-					clocks = <&syscon ASPEED_CLK_SDIO>;
-					status = "disabled";
-				};
-			};
-
-			emmc_controller: sdc@1e750000 {
-				compatible = "aspeed,ast2600-sd-controller";
-				reg = <0x1e750000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1e750000 0x10000>;
-				clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
-				status = "disabled";
-
-				emmc: sdhci@1e750100 {
-					compatible = "aspeed,ast2600-sdhci";
-					reg = <0x100 0x100>;
-					sdhci,auto-cmd12;
-					interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&syscon ASPEED_CLK_EMMC>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_emmc_default>;
-				};
-			};
-
-			vuart1: serial@1e787000 {
-				compatible = "aspeed,ast2500-vuart";
-				reg = <0x1e787000 0x40>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_APB1>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			vuart2: serial@1e788000 {
-				compatible = "aspeed,ast2500-vuart";
-				reg = <0x1e788000 0x40>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_APB1>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart2: serial@1e78d000 {
-				compatible = "ns16550a";
-				reg = <0x1e78d000 0x20>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
-				resets = <&lpc_reset 5>;
-				no-loopback-test;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-				status = "disabled";
-			};
-
-			uart3: serial@1e78e000 {
-				compatible = "ns16550a";
-				reg = <0x1e78e000 0x20>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
-				resets = <&lpc_reset 6>;
-				no-loopback-test;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
-				status = "disabled";
-			};
-
-			uart4: serial@1e78f000 {
-				compatible = "ns16550a";
-				reg = <0x1e78f000 0x20>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
-				resets = <&lpc_reset 7>;
-				no-loopback-test;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
-				status = "disabled";
-			};
-
-			uart6: serial@1e790000 {
-				compatible = "ns16550a";
-				reg = <0x1e790000 0x20>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART6CLK>;
-				no-loopback-test;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart6_default>;
-
-				status = "disabled";
-			};
-
-			uart7: serial@1e790100 {
-				compatible = "ns16550a";
-				reg = <0x1e790100 0x20>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART7CLK>;
-				no-loopback-test;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart7_default>;
-
-				status = "disabled";
-			};
-
-			uart8: serial@1e790200 {
-				compatible = "ns16550a";
-				reg = <0x1e790200 0x20>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART8CLK>;
-				no-loopback-test;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart8_default>;
-
-				status = "disabled";
-			};
-
-			uart9: serial@1e790300 {
-				compatible = "ns16550a";
-				reg = <0x1e790300 0x20>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART9CLK>;
-				no-loopback-test;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart9_default>;
-
-				status = "disabled";
-			};
-
-			i2c: bus@1e78a000 {
-				compatible = "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1e78a000 0x1000>;
-			};
-
-			fsim0: fsi@1e79b000 {
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
-				reg = <0x1e79b000 0x94>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_fsi1_default>;
-				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
-				status = "disabled";
-			};
-
-			fsim1: fsi@1e79b100 {
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
-				reg = <0x1e79b100 0x94>;
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_fsi2_default>;
-				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
-				status = "disabled";
-			};
-
-			udma: dma-controller@1e79e000 {
-				compatible = "aspeed,ast2600-udma";
-				reg = <0x1e79e000 0x1000>;
-				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-				dma-channels = <28>;
-				#dma-cells = <1>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-#include "aspeed-g6-pinctrl.dtsi"
-
-&i2c {
-	i2c0: i2c-bus@80 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x80 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1_default>;
-		status = "disabled";
-	};
-
-	i2c1: i2c-bus@100 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x100 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2_default>;
-		status = "disabled";
-	};
-
-	i2c2: i2c-bus@180 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x180 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3_default>;
-		status = "disabled";
-	};
-
-	i2c3: i2c-bus@200 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x200 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c4_default>;
-		status = "disabled";
-	};
-
-	i2c4: i2c-bus@280 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x280 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c5_default>;
-		status = "disabled";
-	};
-
-	i2c5: i2c-bus@300 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x300 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c6_default>;
-		status = "disabled";
-	};
-
-	i2c6: i2c-bus@380 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x380 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c7_default>;
-		status = "disabled";
-	};
-
-	i2c7: i2c-bus@400 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x400 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c8_default>;
-		status = "disabled";
-	};
-
-	i2c8: i2c-bus@480 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x480 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c9_default>;
-		status = "disabled";
-	};
-
-	i2c9: i2c-bus@500 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x500 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c10_default>;
-		status = "disabled";
-	};
-
-	i2c10: i2c-bus@580 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x580 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c11_default>;
-		status = "disabled";
-	};
-
-	i2c11: i2c-bus@600 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x600 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c12_default>;
-		status = "disabled";
-	};
-
-	i2c12: i2c-bus@680 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x680 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c13_default>;
-		status = "disabled";
-	};
-
-	i2c13: i2c-bus@700 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x700 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c14_default>;
-		status = "disabled";
-	};
-
-	i2c14: i2c-bus@780 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x780 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c15_default>;
-		status = "disabled";
-	};
-
-	i2c15: i2c-bus@800 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x800 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c16_default>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
new file mode 100644
index 0000000000000..c68984322a86c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ASPEED) += \
+	aspeed-ast2500-evb.dtb \
+	aspeed-ast2600-evb-a1.dtb \
+	aspeed-ast2600-evb.dtb \
+	aspeed-bmc-amd-daytonax.dtb \
+	aspeed-bmc-amd-ethanolx.dtb \
+	aspeed-bmc-ampere-mtjade.dtb \
+	aspeed-bmc-ampere-mtmitchell.dtb \
+	aspeed-bmc-arm-stardragon4800-rep2.dtb \
+	aspeed-bmc-asrock-e3c246d4i.dtb \
+	aspeed-bmc-asrock-romed8hm3.dtb \
+	aspeed-bmc-bytedance-g220a.dtb \
+	aspeed-bmc-delta-ahe50dc.dtb \
+	aspeed-bmc-facebook-bletchley.dtb \
+	aspeed-bmc-facebook-cloudripper.dtb \
+	aspeed-bmc-facebook-cmm.dtb \
+	aspeed-bmc-facebook-elbert.dtb \
+	aspeed-bmc-facebook-fuji.dtb \
+	aspeed-bmc-facebook-galaxy100.dtb \
+	aspeed-bmc-facebook-greatlakes.dtb \
+	aspeed-bmc-facebook-minipack.dtb \
+	aspeed-bmc-facebook-tiogapass.dtb \
+	aspeed-bmc-facebook-wedge40.dtb \
+	aspeed-bmc-facebook-wedge100.dtb \
+	aspeed-bmc-facebook-wedge400.dtb \
+	aspeed-bmc-facebook-yamp.dtb \
+	aspeed-bmc-facebook-yosemitev2.dtb \
+	aspeed-bmc-ibm-bonnell.dtb \
+	aspeed-bmc-ibm-everest.dtb \
+	aspeed-bmc-ibm-rainier.dtb \
+	aspeed-bmc-ibm-rainier-1s4u.dtb \
+	aspeed-bmc-ibm-rainier-4u.dtb \
+	aspeed-bmc-intel-s2600wf.dtb \
+	aspeed-bmc-inspur-fp5280g2.dtb \
+	aspeed-bmc-inspur-nf5280m6.dtb \
+	aspeed-bmc-inspur-on5263m5.dtb \
+	aspeed-bmc-lenovo-hr630.dtb \
+	aspeed-bmc-lenovo-hr855xg2.dtb \
+	aspeed-bmc-microsoft-olympus.dtb \
+	aspeed-bmc-opp-lanyang.dtb \
+	aspeed-bmc-opp-mowgli.dtb \
+	aspeed-bmc-opp-nicole.dtb \
+	aspeed-bmc-opp-palmetto.dtb \
+	aspeed-bmc-opp-romulus.dtb \
+	aspeed-bmc-opp-swift.dtb \
+	aspeed-bmc-opp-tacoma.dtb \
+	aspeed-bmc-opp-vesnin.dtb \
+	aspeed-bmc-opp-witherspoon.dtb \
+	aspeed-bmc-opp-zaius.dtb \
+	aspeed-bmc-portwell-neptune.dtb \
+	aspeed-bmc-qcom-dc-scm-v1.dtb \
+	aspeed-bmc-quanta-q71l.dtb \
+	aspeed-bmc-quanta-s6q.dtb \
+	aspeed-bmc-supermicro-x11spi.dtb \
+	aspeed-bmc-inventec-transformers.dtb \
+	aspeed-bmc-tyan-s7106.dtb \
+	aspeed-bmc-tyan-s8036.dtb \
+	aspeed-bmc-ufispace-ncplite.dtb \
+	aspeed-bmc-vegman-n110.dtb \
+	aspeed-bmc-vegman-rx20.dtb \
+	aspeed-bmc-vegman-sx20.dtb
diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts
new file mode 100644
index 0000000000000..a497dd135491b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "AST2500 EVB";
+	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+/*
+ * Enable port A as device (via the virtual hub) and port B as
+ * host by default on the eval board. This can be easily changed
+ * by replacing the override below with &ehci0 { ... } to enable
+ * host on both ports.
+ */
+&vhub {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+     status = "okay";
+     memory-region = <&gfx_memory>;
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts
new file mode 100644
index 0000000000000..f34a2b1ec2f0f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+
+#include "aspeed-ast2600-evb.dts"
+
+/ {
+	model = "AST2600 A1 EVB";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600-evb", "aspeed,ast2600";
+
+	/delete-node/regulator-vcc-sdhci0;
+	/delete-node/regulator-vcc-sdhci1;
+	/delete-node/regulator-vccq-sdhci0;
+	/delete-node/regulator-vccq-sdhci1;
+};
+
+/delete-node/ &sdc;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
new file mode 100644
index 0000000000000..de83c0eb1d6ed
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "AST2600 EVB";
+	compatible = "aspeed,ast2600-evb", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	vcc_sdhci0: regulator-vcc-sdhci0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHCI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhci0: regulator-vccq-sdhci0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHCI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>,
+			 <1800000 0>;
+	};
+
+	vcc_sdhci1: regulator-vcc-sdhci1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHCI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhci1: regulator-vccq-sdhci1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHCI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>,
+			 <1800000 0>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+
+&mac1 {
+	status = "okay";
+
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethphy1>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default>;
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	clk-phase-mmc-hs200 = <9>, <225>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart5 {
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	temp@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&fsim0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdc {
+	status = "okay";
+};
+
+/*
+ * The signal voltage of sdhci0 and sdhci1 on AST2600-A2 EVB is able to be
+ * toggled by GPIO pins.
+ * In the reference design, GPIOV0 of AST2600-A2 EVB is connected to the
+ * power load switch that provides 3.3v to sdhci0 vdd, GPIOV1 is connected to
+ * a 1.8v and a 3.3v power load switch that provides signal voltage to
+ * sdhci0 bus.
+ * If GPIOV0 is active high, sdhci0 is enabled, otherwise, sdhci0 is disabled.
+ * If GPIOV1 is active high, 3.3v power load switch is enabled, sdhci0 signal
+ * voltage is 3.3v, otherwise, 1.8v power load switch will be enabled,
+ * sdhci0 signal voltage becomes 1.8v.
+ * AST2600-A2 EVB also supports toggling signal voltage for sdhci1.
+ * The design is the same as sdhci0, it uses GPIOV2 as power-gpio and GPIOV3
+ * as power-switch-gpio.
+ */
+&sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	sdhci-drive-type = /bits/ 8 <3>;
+	sdhci-caps-mask = <0x7 0x0>;
+	sdhci,wp-inverted;
+	vmmc-supply = <&vcc_sdhci0>;
+	vqmmc-supply = <&vccq_sdhci0>;
+	clk-phase-sd-hs = <7>, <200>;
+};
+
+&sdhci1 {
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	sdhci-drive-type = /bits/ 8 <3>;
+	sdhci-caps-mask = <0x7 0x0>;
+	sdhci,wp-inverted;
+	vmmc-supply = <&vcc_sdhci1>;
+	vqmmc-supply = <&vccq_sdhci1>;
+	clk-phase-sd-hs = <7>, <200>;
+};
+
+&vhub {
+	status = "okay";
+	pinctrl-names = "default";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts
new file mode 100644
index 0000000000000..64bb9bf92de23
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD DaytonaX BMC";
+	compatible = "amd,daytonax-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>,
+			<&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		&pinctrl_rxd1_default
+		&pinctrl_nrts1_default
+		&pinctrl_ndtr1_default
+		&pinctrl_ndsr1_default
+		&pinctrl_ncts1_default
+		&pinctrl_ndcd1_default
+		&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","led-fault","led-identify","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"id-button","","","","","","","",
+	/*D0-D7*/	"","","ASSERT_BMC_READY","","","","","",
+	/*E0-E7*/	"reset-button","reset-control","power-button","power-control","",
+			"power-good","power-ok","",
+	/*F0-F7*/	"","","","","","","BATTERY_DETECT","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"FM_BMC_READ_SPD_TEMP","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default
+		&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts
new file mode 100644
index 0000000000000..6bded774c4575
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 AMD Inc.
+// Author: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD EthanolX BMC";
+	compatible = "amd,ethanolx-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_nrts1_default
+		     &pinctrl_ncts1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		     &pinctrl_adc1_default
+		     &pinctrl_adc2_default
+		     &pinctrl_adc3_default
+		     &pinctrl_adc4_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","FAULT_LED","CHASSIS_ID_LED","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","",
+	/*D0-D7*/	"HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S",
+			"JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD",
+	/*E0-E7*/	"","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN",
+			"MON_P0_PWR_GOOD","MON_PWROK","MON_RESET",
+	/*F0-F7*/	"MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP",
+			"MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","",
+	/*G0-G7*/	"BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0",
+			"P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","",
+	/*H0-H7*/	"BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3",
+			"PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN",
+			"ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT",
+			"ASSERT_CLR_CMOS","ASSERT_BMC_READY",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT",
+			"P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT",
+			"P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT",
+			"P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","SENSOR THERM","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+//APML for P0
+&i2c0 {
+	status = "okay";
+};
+
+//APML for P1
+&i2c1 {
+	status = "okay";
+};
+
+//FPGA
+&i2c2 {
+	status = "okay";
+};
+
+//24LC128 EEPROM
+&i2c3 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+//P0 Power regulators
+&i2c4 {
+	status = "okay";
+};
+
+//P1 Power regulators
+&i2c5 {
+	status = "okay";
+};
+
+//P0/P1 Thermal diode
+&i2c6 {
+	status = "okay";
+};
+
+// Thermal Sensors
+&i2c7 {
+	status = "okay";
+
+	lm75a@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+	};
+
+	lm75a@49 {
+		compatible = "national,lm75a";
+		reg = <0x49>;
+	};
+
+	lm75a@4a {
+		compatible = "national,lm75a";
+		reg = <0x4a>;
+	};
+
+	lm75a@4b {
+		compatible = "national,lm75a";
+		reg = <0x4b>;
+	};
+
+	lm75a@4c {
+		compatible = "national,lm75a";
+		reg = <0x4c>;
+	};
+
+	lm75a@4d {
+		compatible = "national,lm75a";
+		reg = <0x4d>;
+	};
+
+	lm75a@4e {
+		compatible = "national,lm75a";
+		reg = <0x4e>;
+	};
+
+	lm75a@4f {
+		compatible = "national,lm75a";
+		reg = <0x4f>;
+	};
+};
+
+//BMC I2C
+&i2c8 {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x60>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x62>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&kcs4 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x97DE>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	//Enable lpc clock
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default
+	&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
new file mode 100644
index 0000000000000..0a51d2e32fabd
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
@@ -0,0 +1,808 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jade BMC";
+	compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 *  i2c bus 50-57 assigned to NVMe slot 0-7
+		 */
+		i2c50 = &nvmeslot_0;
+		i2c51 = &nvmeslot_1;
+		i2c52 = &nvmeslot_2;
+		i2c53 = &nvmeslot_3;
+		i2c54 = &nvmeslot_4;
+		i2c55 = &nvmeslot_5;
+		i2c56 = &nvmeslot_6;
+		i2c57 = &nvmeslot_7;
+
+		/*
+		 *  i2c bus 60-67 assigned to NVMe slot 8-15
+		 */
+		i2c60 = &nvmeslot_8;
+		i2c61 = &nvmeslot_9;
+		i2c62 = &nvmeslot_10;
+		i2c63 = &nvmeslot_11;
+		i2c64 = &nvmeslot_12;
+		i2c65 = &nvmeslot_13;
+		i2c66 = &nvmeslot_14;
+		i2c67 = &nvmeslot_15;
+
+		/*
+		 *  i2c bus 70-77 assigned to NVMe slot 16-23
+		 */
+		i2c70 = &nvmeslot_16;
+		i2c71 = &nvmeslot_17;
+		i2c72 = &nvmeslot_18;
+		i2c73 = &nvmeslot_19;
+		i2c74 = &nvmeslot_20;
+		i2c75 = &nvmeslot_21;
+		i2c76 = &nvmeslot_22;
+		i2c77 = &nvmeslot_23;
+
+		/*
+		 *  i2c bus 80-81 assigned to NVMe M2 slot 0-1
+		 */
+		i2c80 = &nvme_m2_0;
+		i2c81 = &nvme_m2_1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpioA0mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 8>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 9>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 10>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 11>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 12>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 13>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0mux 0>, <&adc0mux 1>,
+			<&adc1mux 0>, <&adc1mux 1>,
+			<&adc2mux 0>, <&adc2mux 1>,
+			<&adc3mux 0>, <&adc3mux 1>,
+			<&adc4mux 0>, <&adc4mux 1>,
+			<&adc5mux 0>, <&adc5mux 1>,
+			<&adc6mux 0>, <&adc6mux 1>,
+			<&adc7mux 0>, <&adc7mux 1>,
+			<&adc8mux 0>, <&adc8mux 1>,
+			<&adc9mux 0>, <&adc9mux 1>,
+			<&adc10mux 0>, <&adc10mux 1>,
+			<&adc11mux 0>, <&adc11mux 1>,
+			<&adc12mux 0>, <&adc12mux 1>,
+			<&adc13mux 0>, <&adc13mux 1>,
+			<&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		/* spi-max-frequency = <50000000>; */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		/* spi-max-frequency = <100000000>; */
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			uefi@400000 {
+				reg = <0x400000 0x1C00000>;
+				label = "pnor-uefi";
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			 &pinctrl_rxd1_default
+			 &pinctrl_ncts1_default
+			 &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			 &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+			 &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+			 &pinctrl_rxd4_default>;
+};
+
+/* The BMC's uart */
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	smpro@4f {
+		compatible = "ampere,smpro";
+		reg = <0x4f>;
+	};
+	smpro@4e {
+		compatible = "ampere,smpro";
+		reg = <0x4e>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	inlet_mem2: tmp175@28 {
+		compatible = "ti,tmp175";
+		reg = <0x28>;
+	};
+
+	inlet_cpu: tmp175@29 {
+		compatible = "ti,tmp175";
+		reg = <0x29>;
+	};
+
+	inlet_mem1: tmp175@2a {
+		compatible = "ti,tmp175";
+		reg = <0x2a>;
+	};
+
+	outlet_cpu: tmp175@2b {
+		compatible = "ti,tmp175";
+		reg = <0x2b>;
+	};
+
+	outlet1: tmp175@2c {
+		compatible = "ti,tmp175";
+		reg = <0x2c>;
+	};
+
+	outlet2: tmp175@2d {
+		compatible = "ti,tmp175";
+		reg = <0x2d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_0_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8_15: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		nvmeslot_16_23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+
+		nvme_m2_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		nvme_m2_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+	};
+};
+
+&nvmeslot_0_7 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+
+	};
+};
+
+&nvmeslot_8_15 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_12: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_13: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_14: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_15: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&nvmeslot_16_23 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+	adm1278@10 {
+		compatible = "adi,adm1278";
+		reg = <0x10>;
+	};
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+	};
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default
+			&pinctrl_pwm4_default &pinctrl_pwm5_default
+			&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@1 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@5 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@6 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@7 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@8 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@9 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@10 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@11 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","","","S0_BMC_SPECIAL_BOOT","","","","",
+	/*B0-B7*/	"BMC_SELECT_EEPROM","","","",
+			"POWER_BUTTON","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
+			"S1_DDR_SAVE","","",
+	/*G0-G7*/	"host0-ready","SHD_REQ_L","","S0_OVERTEMP_L","","",
+			"","",
+	/*H0-H7*/	"","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","",
+	/*I0-I7*/	"PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT",
+			"","","","","",
+	/*J0-J7*/	"S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","",
+			"","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/       "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","UID_BUTTON","","",
+	/*R0-R7*/	"","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
+			"OCP_MAIN_PWREN","RESET_BUTTON","","",
+	/*S0-S7*/	"","","","","rtc-battery-voltage-read-enable","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","",
+			"S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR",
+			"S1_BMC_DDR_ADR","","","","",
+	/*AC0-AC7*/	"SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
+			"BMC_OCP_PG";
+
+	i2c4-o-en-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_I2C4_O_EN";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
new file mode 100644
index 0000000000000..1e0e884652549
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -0,0 +1,585 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2022, Ampere Computing LLC
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt.Mitchell BMC";
+	compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpioI5mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc14mux: adc14mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc15mux: adc15mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0mux 0>, <&adc0mux 1>,
+			<&adc1mux 0>, <&adc1mux 1>,
+			<&adc2mux 0>, <&adc2mux 1>,
+			<&adc3mux 0>, <&adc3mux 1>,
+			<&adc4mux 0>, <&adc4mux 1>,
+			<&adc5mux 0>, <&adc5mux 1>,
+			<&adc6mux 0>, <&adc6mux 1>,
+			<&adc7mux 0>, <&adc7mux 1>,
+			<&adc8mux 0>, <&adc8mux 1>,
+			<&adc9mux 0>, <&adc9mux 1>,
+			<&adc10mux 0>, <&adc10mux 1>,
+			<&adc11mux 0>, <&adc11mux 1>,
+			<&adc12mux 0>, <&adc12mux 1>,
+			<&adc13mux 0>, <&adc13mux 1>,
+			<&adc14mux 0>, <&adc14mux 1>,
+			<&adc15mux 0>, <&adc15mux 1>,
+			<&adc_i2c 0>, <&adc_i2c 1>,
+			<&adc_i2c 2>, <&adc_i2c 3>,
+			<&adc_i2c 4>, <&adc_i2c 5>,
+			<&adc_i2c 6>, <&adc_i2c 7>,
+			<&adc_i2c 8>, <&adc_i2c 9>,
+			<&adc_i2c 10>, <&adc_i2c 11>,
+			<&adc_i2c 12>, <&adc_i2c 13>,
+			<&adc_i2c 14>, <&adc_i2c 15>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	adc_i2c: adc@16 {
+		compatible = "lltc,ltc2497";
+		reg = <0x16>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			outlet_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu1_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			pcie_zone_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu0_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			pcie_zone_temp2: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			outlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			mb_inlet_temp1: temperature-sensor@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+			mb_inlet_temp2: temperature-sensor@4c {
+				compatible = "microchip,emc1413";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+		gpio-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#gpio-cells = <2>;
+
+		bmc-ocp0-en-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "bmc-ocp0-en-n";
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@35 {
+		compatible = "ti,tmp175";
+		reg = <0x35>;
+	};
+};
+
+&adc0 {
+	ref_voltage = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	ref_voltage = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","","",
+	/*C0-C7*/	"s0-vrd-fault-n","s1-vrd-fault-n","","",
+			"irq-n","","vrd-sel","spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","bmc-ncsi-txen","","",
+	/*E0-E7*/	"","","clk50m-bmc-ncsi","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-csout-prochot",
+			"s0-vr-hot-n","s1-vr-hot-n",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","","","",
+	/*H0-H7*/	"","","wd-disable-n","power-chassis-good","","","","",
+	/*I0-I7*/	"","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","s0-ddr-save","soc-spi-nor-access","presence-cpu0",
+			"s0-rtc-lock","","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","s1-heartbeat","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","",
+			"led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify",
+			"s1-ddr-save","spi-nor-access","sys-pgood","presence-cpu1",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","host0-ready","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"","ocp-main-pwren","ocp-pgood","",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
+			"s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
+			"s1-overtemp-n","s1-spi-auth-fail-n",
+	/*Y0-Y7*/	"","","","","","","","host0-special-boot",
+	/*Z0-Z7*/	"reset-button","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","","","s0-soc-pgood","",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
new file mode 100644
index 0000000000000..7c6af7f226e75
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HXT StarDragon 4800 REP2 AST2520";
+	compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+						<&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system_fault1 {
+			label = "System_fault1";
+			gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		system_fault2 {
+			label = "System_fault2";
+			gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+};
+
+&uart3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+	current-speed = <115200>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
+		 <&syscon ASPEED_CLK_MAC2RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp421@1e {
+		compatible = "ti,tmp421";
+		reg = <0x1e>;
+	};
+	tmp421@2a {
+		compatible = "ti,tmp421";
+		reg = <0x2a>;
+	};
+	tmp421@1c {
+		compatible = "ti,tmp421";
+		reg = <0x1c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	nvt210@4c {
+		compatible = "nvt210";
+		reg = <0x4c>;
+	};
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca9641@70 {
+		compatible = "nxp,pca9641";
+		reg = <0x70>;
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+			dps650ab@58 {
+				compatible = "dps650ab";
+				reg = <0x58>;
+			};
+		};
+	};
+
+	dps650ab@58 {
+		compatible = "delta,dps650ab";
+		reg = <0x58>;
+	};
+
+	dps650ab@59 {
+		compatible = "delta,dps650ab";
+		reg = <0x59>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+	pin_gpio_c7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BIOS_SPI_MUX_S";
+	};
+	pin_gpio_d1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PHY2_RESET_N";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
new file mode 100644
index 0000000000000..c4b2efbfdf56d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock E3C246D4I BMC";
+	compatible = "asrock,e3c246d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			/* BMC_HB_LED_N */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			/* SYSTEM_FAULT_LED_N */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		uid-button {
+			label = "uid-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* thermal sensor, one diode run to a disconnected header */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* FRU EEPROM */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "BMC_MAC1_INTB", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "", "", "", "", "", "IRQ_BMC_PCH_SMI_LPC_N", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "SML0ALERT",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "SKL_CNL_R", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "BMC_CTS1", "BMC_DCD1", "BMC_DSR1", "BMC_RI1",
+			"BMC_DTR1", "BMC_RTS1", "BMC_TXD1", "BMC_RXD1",
+		/*  M */ "BMC_LAN0_DIS_N", "BMC_LAN1_DIS_N", "", "",
+			"", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SBM_PRESENT_1_N", "BMC_SBM_PRESENT_2_N",
+			"BMC_SBM_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST",
+			"", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "PS_PWROK", /* dummy always-high signal */
+			"", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_PCH_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY",
+			"", "", "", "",
+		/* AC */ "LAD0", "LAD1", "LAD2", "LAD3",
+			"CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
+
+	/* Assert BMC_READY so BIOS doesn't sit around waiting for it */
+	bmc-ready {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
new file mode 100644
index 0000000000000..4554abf0c7cdf
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock ROMED8HM3 BMC v1.00";
+	compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* inlet temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* IPB temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* IPB PMIC */
+	lm25066@40 {
+		compatible = "lm25066";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	/* 12VSB PMIC */
+	lm25066@41 {
+		compatible = "lm25066";
+		reg = <0x41>;
+		shunt-resistor-micro-ohms = <10000>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Baseboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default>;
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "POST_COMPLETE_N", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "PSU_FAN_FAIL_N",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2",
+			"PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N",
+		/*  H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N",
+			"FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN",
+			"MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N",
+			"BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "",
+		/*  Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "",
+			"", "", "", "",
+		/* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
new file mode 100644
index 0000000000000..f75cad41ae6f6
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
@@ -0,0 +1,940 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2020 Bytedance.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bytedance G220A BMC";
+	compatible = "bytedance,g220a-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+		i2c14 = &channel_3_0;
+		i2c15 = &channel_3_1;
+		i2c16 = &channel_3_2;
+		i2c17 = &channel_3_3;
+		i2c18 = &channel_6_0;
+		i2c19 = &channel_6_1;
+		i2c20 = &channel_6_2;
+		i2c21 = &channel_6_3;
+		i2c22 = &channel_6_4;
+		i2c23 = &channel_6_5;
+		i2c24 = &channel_6_6;
+		i2c25 = &channel_6_7;
+		i2c26 = &channel_6_8;
+		i2c27 = &channel_6_9;
+		i2c28 = &channel_6_10;
+		i2c29 = &channel_6_11;
+		i2c30 = &channel_6_12;
+		i2c31 = &channel_6_13;
+		i2c32 = &channel_6_14;
+		i2c33 = &channel_6_15;
+		i2c34 = &channel_6_16;
+		i2c35 = &channel_6_17;
+		i2c36 = &channel_6_18;
+		i2c37 = &channel_6_19;
+		i2c38 = &channel_6_20;
+		i2c39 = &channel_6_21;
+		i2c40 = &channel_6_22;
+		i2c41 = &channel_6_23;
+		i2c42 = &channel_6_24;
+		i2c43 = &channel_6_25;
+		i2c44 = &channel_10_0;
+		i2c45 = &channel_10_1;
+		i2c46 = &channel_10_2;
+		i2c47 = &channel_10_3;
+		i2c48 = &channel_10_4;
+		i2c49 = &channel_10_5;
+		i2c50 = &channel_10_6;
+		i2c51 = &channel_10_7;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@bc000000 {
+			no-map;
+			reg = <0xbc000000 0x04000000>; /* 64M */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		bmc_alive {
+			label = "bmc_alive";
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			led-pattern = <1000 1000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		event-burn-in-signal {
+			label = "burn-in";
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(R, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-rear-riser1-presence {
+			label = "rear-riser1-presence";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-alrt-pvddq-cpu0 {
+			label = "alrt-pvddq-cpu0";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-rear-riser0-presence {
+			label = "rear-riser0-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+
+		event-fault-pvddq-cpu0 {
+			label = "fault-pvddq-cpu0";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-alrt-pvddq-cpu1 {
+			label = "alrt-pvddq-cpu1";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fault-pvddq-cpu1 {
+			label = "alrt-pvddq-cpu1";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fault-pvccin-cpu1 {
+			label = "fault-pvccin-cpuq";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-bmc-rom0-wp {
+			label = "bmc-rom0-wp";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-bmc-rom1-wp {
+			label = "bmc-rom1-wp";
+			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-front-bp1-presence {
+			label = "front-bp1-presence";
+			gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <16>;
+		};
+
+		event-rear-bp-presence {
+			label = "rear-bp-presence";
+			gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
+			linux,code = <17>;
+		};
+
+		event-fault-pvccin-cpu0 {
+			label = "fault-pvccin-cpu0";
+			gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
+			linux,code = <18>;
+		};
+
+		event-alrt-p1v05-pvcc {
+			label = "alrt-p1v05-pvcc1";
+			gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <19>;
+		};
+
+		event-fault-p1v05-pvccio {
+			label = "alrt-p1v05-pvcc1";
+			gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <20>;
+		};
+
+		event-alrt-p1v8-pvccio {
+			label = "alrt-p1v8-pvccio";
+			gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
+			linux,code = <21>;
+		};
+
+		event-fault-p1v8-pvccio {
+			label = "fault-p1v8-pvccio";
+			gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
+			linux,code = <22>;
+		};
+
+		event-front-bp0-presence {
+			label = "front-bp0-presence";
+			gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
+			linux,code = <23>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,alt-boot;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"SMRST_OCP_N","MAC2_LINK","BMC_CPLD_SMB_RST_R_N","BMC_CPLD_GPIO0",
+			"","","","",
+	/*B0-B7*/	"BMC_INIT_R_OK","FM_BOARD_REV_ID2","FM_PROJECT_ID7","FAULT_P12V_STBY_N",
+			"","CPU0_PROCHOT_LVT3_N","","BIOS_LOAD_DEFAULT_R_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"FM_PROJECT_ID0","FM_PROJECT_ID1","FM_PROJECT_ID2","FM_PROJECT_ID3",
+			"FM_PROJECT_ID4","FM_PROJECT_ID5","","",
+	/*F0-F7*/	"PSU0_PRSNT_N","PSU1_PRSNT_N","","FAULT_P12V_NVME_N",
+			"BIOS_DEBUG_MODE_R_N","DISABLE_CPU_DDR_R_SPD","COOLING_STRATEGY",
+			"PCH_GLB_RST_N",
+	/*G0-G7*/	"P12V_PMBUS_ALERT_N","CPLD_ALERT_N","BMC_RELOAD_N",
+			"P12V_PVDDQ_PMBUS_ALERT_N","BMC_JTAG_TCK_MUX_R_SEL","","NMI_OUT",
+			"NMI_BUTTON",
+	/*H0-H7*/	"BMC_CPLD_JTAG_TDI","BMC_CPLD_JTAG_TDO","BMC_CPLD_JTAG_TCK",
+			"BMC_CPLD_JTAG_TMS","FM_PROJECT_ID6","FM_BOARD_REV_ID0",
+			"PCA9546_U70_RST_N","IRQ_SML0_ALERT_N",
+	/*I0-I7*/	"FAULT_FRONT_RISER_P12V_N","FAULT_OCP_P12V_N","FM_BMC_PCH_SCI_R_N",
+			"","","","","",
+	/*J0-J7*/	"FM_CPU0_SKTOCC_N","FM_CPU1_SKTOCC_N","FM_CPU1_DISABLE_COD_N",
+			"","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"P12V_FAULT_N","PWRGD_P12V_PCIE_RISER","","LEAKAGE_DETECT_INPUT_N",
+			"","IRQ_SML1_PMBUS_ALERT_N","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_THERMTRIP_N","CHASSIS_INTRUSION",
+	/*R0-R7*/	"","PVCCIN_CPU1_SMBALERT_N","BMC_PREQ_R_N","FAULT_P12V_PCIE_RISER_N",
+			"ALT_P12V_PCIE_RISER_N","BURN_BOARD_N","PVCCIN_CPU0_SMBALERT_N","",
+	/*S0-S7*/	"BMC_PRDY_N","SIO_POWER_GOOD","FM_BMC_PWR_DEBUG_R_N",
+			"FM_BMC_XDP_DEBUG_EN","","STRAP_BMC_BATTERY_GPIOS5","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","PWRGD_PSU0_PWROK","CPU1_PROCHOT_LVT3_N","IRQ_BMC_PCH_SMI_LPC_N",
+			"","","","",
+	/*Z0-Z7*/	"XDP_PRSNT_N","BMC_XDP_SYS_PWROK","BMC_XDP_JTAG_SEL",
+			"PCH_BMC_SMI_ACTIVE_R_N","","","","",
+	/*AA0-AA7*/	"PWRGD_P12V_STBY_OCP","PS_PWROK","RST_PLTRST_BMC_R_N","HDA_SDO_R",
+			"FM_SLPS4_R_N","PWRGD_PSU1_PWROK","POWER_BUTTON","POWER_OUT",
+	/*AB0-AB7*/	"","RESET_OUT","SPI_BIOS_MODE_SELECT","POST_COMPLETE","","","","",
+	/*AC0-AC7*/	"","","","","","","","CPLD_PLTRST_B_N";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xCA2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xCA4>;
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_3_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_3_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_3_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	i2c-switch@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_6_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_6_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_6_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_6_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		channel_6_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		channel_6_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		channel_6_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		channel_6_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_6_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			i2c-switch@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_12: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+				};
+
+				channel_6_13: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_14: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_15: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			i2c-switch@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_16: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+				};
+
+				channel_6_17: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_18: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_19: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			i2c-switch@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_20: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				channel_6_21: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_22: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_23: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			i2c-switch@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_24: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				channel_6_25: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			 };
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	pca0:pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca1:pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_10_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_10_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_10_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_10_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_10_4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_10_5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_10_6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_10_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+};
+
+&gpio {
+	pin_gpio_i3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "NCSI_BMC_R_SEL";
+	};
+
+	pin_gpio_b6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "EN_NCSI_SWITCH_N";
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
new file mode 100644
index 0000000000000..6600f7e9bf5ed
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+#define EFUSE_OUTPUT(n)					\
+	efuse##n {					\
+		compatible = "regulator-output";	\
+		vout-supply = <&efuse##n>;		\
+	}
+
+#define __stringify(x) #x
+
+#define EFUSE(hexaddr, num)							\
+	efuse@##hexaddr {							\
+		compatible = "lm25066";						\
+		reg = <0x##hexaddr>;						\
+		shunt-resistor-micro-ohms = <675>;				\
+		regulators {							\
+			efuse##num: vout0 {					\
+				regulator-name = __stringify(efuse##num##-reg);	\
+			};							\
+		};								\
+	}
+
+/{
+	model = "Delta Power AHE-50DC";
+	compatible = "delta,ahe50dc-bmc", "aspeed,ast2400";
+
+	aliases {
+		serial4 = &uart5;
+
+		/*
+		 * pca9541-arbitrated logical i2c buses are numbered as the
+		 * corresponding physical bus plus 20
+		 */
+		i2c20 = &i2carb0;
+		i2c21 = &i2carb1;
+		i2c22 = &i2carb2;
+		i2c23 = &i2carb3;
+		i2c24 = &i2carb4;
+		i2c26 = &i2carb6;
+		i2c27 = &i2carb7;
+		i2c28 = &i2carb8;
+		i2c32 = &i2carb12;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,115200n8 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		panic {
+			gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "panic";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+
+	EFUSE_OUTPUT(01);
+	EFUSE_OUTPUT(02);
+	EFUSE_OUTPUT(03);
+	EFUSE_OUTPUT(04);
+	EFUSE_OUTPUT(05);
+	EFUSE_OUTPUT(06);
+	EFUSE_OUTPUT(07);
+	EFUSE_OUTPUT(08);
+	EFUSE_OUTPUT(09);
+	EFUSE_OUTPUT(10);
+	EFUSE_OUTPUT(11);
+	EFUSE_OUTPUT(12);
+	EFUSE_OUTPUT(13);
+	EFUSE_OUTPUT(14);
+	EFUSE_OUTPUT(15);
+	EFUSE_OUTPUT(16);
+	EFUSE_OUTPUT(17);
+	EFUSE_OUTPUT(18);
+	EFUSE_OUTPUT(19);
+	EFUSE_OUTPUT(20);
+	EFUSE_OUTPUT(21);
+	EFUSE_OUTPUT(22);
+	EFUSE_OUTPUT(23);
+	EFUSE_OUTPUT(24);
+	EFUSE_OUTPUT(25);
+	EFUSE_OUTPUT(26);
+	EFUSE_OUTPUT(27);
+	EFUSE_OUTPUT(28);
+	EFUSE_OUTPUT(29);
+	EFUSE_OUTPUT(30);
+	EFUSE_OUTPUT(31);
+	EFUSE_OUTPUT(32);
+	EFUSE_OUTPUT(33);
+	EFUSE_OUTPUT(34);
+	EFUSE_OUTPUT(35);
+	EFUSE_OUTPUT(36);
+	EFUSE_OUTPUT(37);
+	EFUSE_OUTPUT(38);
+	EFUSE_OUTPUT(39);
+	EFUSE_OUTPUT(40);
+	EFUSE_OUTPUT(41);
+	EFUSE_OUTPUT(42);
+	EFUSE_OUTPUT(43);
+	EFUSE_OUTPUT(44);
+	EFUSE_OUTPUT(45);
+	EFUSE_OUTPUT(46);
+	EFUSE_OUTPUT(47);
+	EFUSE_OUTPUT(48);
+	EFUSE_OUTPUT(49);
+	EFUSE_OUTPUT(50);
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "flash0";
+		spi-max-frequency = <50000000>; // 50 MHz
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@79 {
+		compatible = "nxp,pca9541";
+		reg = <0x79>;
+
+		i2carb0: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57 */
+			EFUSE(10, 03);
+			EFUSE(11, 04);
+			EFUSE(12, 01);
+			EFUSE(13, 02);
+			EFUSE(14, 13);
+			EFUSE(15, 14);
+			EFUSE(16, 15);
+			EFUSE(17, 16);
+			EFUSE(40, 12);
+			EFUSE(41, 11);
+			EFUSE(42, 10);
+			EFUSE(43, 09);
+			EFUSE(44, 08);
+			EFUSE(45, 07);
+			EFUSE(46, 05);
+			EFUSE(47, 06);
+			EFUSE(50, 17);
+			EFUSE(51, 18);
+			EFUSE(52, 20);
+			EFUSE(53, 19);
+			EFUSE(54, 22);
+			EFUSE(55, 21);
+			EFUSE(56, 24);
+			EFUSE(57, 23);
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@72 {
+		compatible = "nxp,pca9541";
+		reg = <0x72>;
+
+		i2carb1: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@73 {
+		compatible = "nxp,pca9541";
+		reg = <0x73>;
+
+		i2carb2: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@74 {
+		compatible = "nxp,pca9541";
+		reg = <0x74>;
+
+		i2carb3: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7a {
+		compatible = "nxp,pca9541";
+		reg = <0x7a>;
+
+		i2carb4: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9534";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57, 59, 5a */
+			EFUSE(10, 27);
+			EFUSE(11, 28);
+			EFUSE(12, 25);
+			EFUSE(13, 26);
+			EFUSE(14, 37);
+			EFUSE(15, 38);
+			EFUSE(16, 39);
+			EFUSE(17, 40);
+			EFUSE(40, 36);
+			EFUSE(41, 35);
+			EFUSE(42, 34);
+			EFUSE(43, 33);
+			EFUSE(44, 32);
+			EFUSE(45, 31);
+			EFUSE(46, 29);
+			EFUSE(47, 30);
+			EFUSE(50, 41);
+			EFUSE(51, 42);
+			EFUSE(52, 44);
+			EFUSE(53, 43);
+			EFUSE(54, 46);
+			EFUSE(55, 45);
+			EFUSE(56, 48);
+			EFUSE(57, 47);
+			EFUSE(59, 49);
+			EFUSE(5a, 50);
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@75 {
+		compatible = "nxp,pca9541";
+		reg = <0x75>;
+
+		i2carb6: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@76 {
+		compatible = "nxp,pca9541";
+		reg = <0x76>;
+
+		i2carb7: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7c {
+		compatible = "nxp,pca9541";
+		reg = <0x7c>;
+
+		i2carb8: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fancontrol@30 {
+				compatible = "delta,ahe50dc-fan";
+				reg = <0x30>;
+			};
+
+			/* Baseboard FRU eeprom */
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@71 {
+		compatible = "nxp,pca9541";
+		reg = <0x71>;
+
+		i2carb12: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "", "", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "RESET_PEER_N", "HEARTBEAT_OUT", "", "", "", "", "", "",
+		/*  D */ "", "", "", "", "", "", "", "",
+		/*  E */ "DOOM_N", "", "", "", "", "LED_PWR_BLUE", "", "",
+		/*  F */ "", "", "", "", "", "", "", "",
+		/*  G */ "", "", "", "", "", "", "", "",
+		/*  H */ "", "", "", "", "", "", "", "",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "", "", "BMC_ID", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "LED_GREEN", "", "LED_RED", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "HEARTBEAT_IN", "BOARDREV0", "BOARDREV1", "",
+		/*  Z */ "", "", "", "", "", "", "", "",
+		/* AA */ "", "", "", "", "", "", "", "",
+		/* AB */ "", "", "", "";
+
+	/*
+	 * I don't rightly know what this GPIO really *is*, but setting it to
+	 * zero causes the fans to run at full speed, after which setting it
+	 * back to one causes a power output glitch, so install a hog to keep
+	 * it at one as a failsafe to ensure nothing accidentally touches it.
+	 */
+	doom-guardrail {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
new file mode 100644
index 0000000000000..e899de681f475
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -0,0 +1,1077 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Bletchley BMC";
+	compatible = "facebook,bletchley-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi1_gpio: spi1-gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpmdev@0 {
+			compatible = "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+
+	switchphy: ethernet-phy@0 {
+		// Fixed link
+	};
+
+	front_gpio_leds {
+		compatible = "gpio-leds";
+		sys_log_id {
+			default-state = "off";
+			gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fan_gpio_leds {
+		compatible = "gpio-leds";
+		fan0_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
+		};
+		fan0_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sled1_gpio_leds {
+		compatible = "gpio-leds";
+		sled1_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled1_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled2_gpio_leds {
+		compatible = "gpio-leds";
+		sled2_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled2_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled3_gpio_leds {
+		compatible = "gpio-leds";
+		sled3_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled3_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled4_gpio_leds {
+		compatible = "gpio-leds";
+		sled4_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled4_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled5_gpio_leds {
+		compatible = "gpio-leds";
+		sled5_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled5_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled6_gpio_leds {
+		compatible = "gpio-leds";
+		sled6_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled6_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		presence-sled1 {
+			label = "presence-sled1";
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 2)>;
+		};
+		presence-sled2 {
+			label = "presence-sled2";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+		presence-sled3 {
+			label = "presence-sled3";
+			gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 4)>;
+		};
+		presence-sled4 {
+			label = "presence-sled4";
+			gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 5)>;
+		};
+		presence-sled5 {
+			label = "presence-sled5";
+			gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 6)>;
+		};
+		presence-sled6 {
+			label = "presence-sled6";
+			gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 7)>;
+		};
+	};
+
+	vbus_sled1: vbus_sled1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled2: vbus_sled2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled3: vbus_sled3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled4: vbus_sled4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled4";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled5: vbus_sled5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled6: vbus_sled6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled6";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&switchphy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled1_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED1_SWD_MUX", "SLED1_XRES_SWD_N",
+		"SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN";
+	};
+
+	sled1_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
+		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
+		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
+		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
+	};
+
+	sled1_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled1_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled1>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled2_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED2_SWD_MUX", "SLED2_XRES_SWD_N",
+		"SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN";
+	};
+
+	sled2_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
+		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
+		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
+		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
+	};
+
+	sled2_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled2_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled2>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled3_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED3_SWD_MUX", "SLED3_XRES_SWD_N",
+		"SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN";
+	};
+
+	sled3_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
+		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
+		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
+		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
+	};
+
+	sled3_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled3_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled3>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled4_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED4_SWD_MUX", "SLED4_XRES_SWD_N",
+		"SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN";
+	};
+
+	sled4_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
+		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
+		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
+		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
+	};
+
+	sled4_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled4_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled4>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled5_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED5_SWD_MUX", "SLED5_XRES_SWD_N",
+		"SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN";
+	};
+
+	sled5_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
+		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
+		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
+		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
+	};
+
+	sled5_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled5_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled5>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled6_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED6_SWD_MUX", "SLED6_XRES_SWD_N",
+		"SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN";
+	};
+
+	sled6_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
+		"SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
+		"SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
+		"SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
+	};
+
+	sled6_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled6_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled6>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+
+	rtc@51 {
+		/* in-chip rtc disabled, use external rtc (battery-backed) */
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	front_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-fault-identify","power-p5v-stby-good",
+		"power-p1v0-dvdd-good","power-p1v0-avdd-good",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+		shunt-resistor-micro-ohms = <300>;
+		adi,volt-curr-sample-average = <128>;
+		adi,power-sample-average = <128>;
+	};
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	tmp421@4d {
+		compatible = "ti,tmp421";
+		reg = <0x4d>;
+	};
+
+	fan_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"presence-fan0","presence-fan1",
+		"presence-fan2","presence-fan3",
+		"power-fan0-good","power-fan1-good",
+		"power-fan2-good","power-fan3-good",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c13 {
+	multi-master;
+	aspeed,hw-timeout-ms = <1000>;
+	status = "okay";
+
+	//USB Debug Connector
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N",
+			"SEL_SPI2_MUX","SPI2_MUX1",
+			"SPI2_MUX2","SPI2_MUX3",
+			"","FUSB302_SLED3_INT_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"BMC_SLED1_STCK","BMC_SLED2_STCK",
+			"BMC_SLED3_STCK","BMC_SLED4_STCK",
+			"BMC_SLED5_STCK","BMC_SLED6_STCK",
+			"","",
+	/*G0-G7*/	"BSM_FRU_WP","SWITCH_FRU_MUX","","FM_SOL_UART_CH_SEL",
+			"PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
+	/*H0-H7*/	"presence-riser1","presence-riser2",
+			"presence-sled1","presence-sled2",
+			"presence-sled3","presence-sled4",
+			"presence-sled5","presence-sled6",
+	/*I0-I7*/	"REV_ID0","",
+			"REV_ID1","REV_ID2",
+			"","BSM_FLASH_WP_STATUS",
+			"BMC_TPM_PRES_N","FUSB302_SLED6_INT_N",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","BMC_RTC_INT","","",
+	/*M0-M7*/	"ALERT_SLED1_N","ALERT_SLED2_N",
+			"ALERT_SLED3_N","ALERT_SLED4_N",
+			"ALERT_SLED5_N","ALERT_SLED6_N",
+			"","USB_DEBUG_PWR_BTN_N",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"","","","",
+			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
+	/*P0-P7*/	"","","","","","","","BMC_HEARTBEAT",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","BAT_DETECT",
+			"BMC_BT_WP0_N","BMC_BT_WP1_N","","FUSB302_SLED4_INT_N",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"PWRGD_CNS_PSU","RST_BMC_MVL_N",
+			"P12V_AUX_ALERT1_N","PSU_PRSNT",
+			"USB2_SEL0_A","USB2_SEL1_A",
+			"USB2_SEL0_B","USB2_SEL1_B",
+	/*W0-W7*/	"RST_FRONT_IOEXP_N","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"BMC_SELF_HW_RST","BSM_PRSNT_N",
+			"BSM_FLASH_LATCH_N","FUSB302_SLED5_INT_N",
+			"","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&adc0 {
+	vref = <1800>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio0 {
+	status = "okay";
+	/* TODO: Add Marvell 88E6191X */
+};
+
+&mdio3 {
+	status = "okay";
+	/* TODO: Add Marvell 88X3310 */
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiov2_unbiased_default: gpiov2 {
+		pins = "AD14";
+		bias-disable;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts
new file mode 100644
index 0000000000000..5cd060029ea97
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Cloudripper BMC";
+	compatible = "facebook,cloudripper-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (1-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (3-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * PDB (Power Delivery Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (15-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <2>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+
+		eeprom@1 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <1>;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/*
+ * "mdio1" is connected to the MDC/MDIO interface of the on-board
+ * management switch (whose ports are connected to BMC, Host and front
+ * panel ethernet port).
+ */
+&mdio1 {
+	status = "okay";
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	/*
+	 * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	/*
+	 * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c6 {
+	lp5012@14 {
+		compatible = "ti,lp5012";
+		reg = <0x14>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "sys";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+
+		multi-led@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "fan";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+
+		multi-led@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "psu";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+
+		multi-led@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "scm";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
+	 * Delivery Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c15 {
+	/*
+	 * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
+	 * Controller Module).
+	 */
+	i2c-switch@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux48: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux49: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux50: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux51: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux52: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux53: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux54: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux55: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
new file mode 100644
index 0000000000000..90a3f485c67a9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
@@ -0,0 +1,1590 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Backpack CMM BMC";
+	compatible = "facebook,cmm-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+
+		/*
+		 * PCA9548 (1-0077) provides 8 channels for connecting to
+		 * 4 Line Cards and 4 Fabric Cards.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (2-0071) provides 8 channels for connecting to
+		 * Power Distribution Board.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (8-0077) provides 8 channels and the first 4
+		 * channels are connecting to 4 Fan Control Boards.
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * 2 PCA9548 (18-0070 & 18-0073), 16 channels connecting
+		 * to Line Card #1.
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * 2 PCA9548 (19-0070 & 19-0073), 16 channels connecting
+		 * to Line Card #2.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * 2 PCA9548 (20-0070 & 20-0073), 16 channels connecting
+		 * to Line Card #3.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * 2 PCA9548 (21-0070 & 21-0073), 16 channels connecting
+		 * to Line Card #4.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * 2 PCA9548 (16-0070 & 16-0073), 16 channels connecting
+		 * to Fabric Card #1.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * 2 PCA9548 (17-0070 & 17-0073), 16 channels connecting
+		 * to Fabric Card #2.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * 2 PCA9548 (22-0070 & 22-0073), 16 channels connecting
+		 * to Fabric Card #3.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+		i2c144 = &imux144;
+		i2c145 = &imux145;
+		i2c146 = &imux146;
+		i2c147 = &imux147;
+		i2c148 = &imux148;
+		i2c149 = &imux149;
+		i2c150 = &imux150;
+		i2c151 = &imux151;
+
+		/*
+		 * 2 PCA9548 (23-0070 & 23-0073), 16 channels connecting
+		 * to Fabric Card #4.
+		 */
+		i2c152 = &imux152;
+		i2c153 = &imux153;
+		i2c154 = &imux154;
+		i2c155 = &imux155;
+		i2c156 = &imux156;
+		i2c157 = &imux157;
+		i2c158 = &imux158;
+		i2c159 = &imux159;
+		i2c160 = &imux160;
+		i2c161 = &imux161;
+		i2c162 = &imux162;
+		i2c163 = &imux163;
+		i2c164 = &imux164;
+		i2c165 = &imux165;
+		i2c166 = &imux166;
+		i2c167 = &imux167;
+
+		/*
+		 * PCA9548 (32-0070), 8 channels connecting to Fan Control
+		 # Board #1.
+		 */
+		i2c168 = &imux168;
+		i2c169 = &imux169;
+		i2c170 = &imux170;
+		i2c171 = &imux171;
+		i2c172 = &imux172;
+		i2c173 = &imux173;
+		i2c174 = &imux174;
+		i2c175 = &imux175;
+
+		/*
+		 * PCA9548 (33-0070), 8 channels connecting to Fan Control
+		 # Board #2.
+		 */
+		i2c176 = &imux176;
+		i2c177 = &imux177;
+		i2c178 = &imux178;
+		i2c179 = &imux179;
+		i2c180 = &imux180;
+		i2c181 = &imux181;
+		i2c182 = &imux182;
+		i2c183 = &imux183;
+
+		/*
+		 * PCA9548 (34-0070), 8 channels connecting to Fan Control
+		 # Board #3.
+		 */
+		i2c184 = &imux184;
+		i2c185 = &imux185;
+		i2c186 = &imux186;
+		i2c187 = &imux187;
+		i2c188 = &imux188;
+		i2c189 = &imux189;
+		i2c190 = &imux190;
+		i2c191 = &imux191;
+
+		/*
+		 * PCA9548 (35-0070), 8 channels connecting to Fan Control
+		 # Board #4.
+		 */
+		i2c192 = &imux192;
+		i2c193 = &imux193;
+		i2c194 = &imux194;
+		i2c195 = &imux195;
+		i2c196 = &imux196;
+		i2c197 = &imux197;
+		i2c198 = &imux198;
+		i2c199 = &imux199;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlycon";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_ncts1_default
+		     &pinctrl_ndcd1_default
+		     &pinctrl_ndsr1_default
+		     &pinctrl_ndtr1_default
+		     &pinctrl_nrts1_default>;
+};
+
+&uart3 {
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default
+		     &pinctrl_ncts3_default
+		     &pinctrl_ndcd3_default
+		     &pinctrl_nri3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c0 {
+	status = "okay";
+};
+
+/*
+ * I2C bus to Line Cards and Fabric Cards.
+ */
+&i2c1 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		/* To Fabric Card #1 */
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #2 */
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #1 */
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux40: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux41: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux42: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux43: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux44: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux45: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux46: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux47: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #2 */
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To LC3 SCM */
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #4 */
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #3 */
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux144: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux145: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux146: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux147: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux148: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux149: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux150: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux151: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #4 */
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux152: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux153: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux154: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux155: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux156: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux157: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux158: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux159: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux160: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux161: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux162: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux163: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux164: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux165: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux166: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux167: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+	};
+};
+
+/*
+ * I2C bus to Power Distribution Board.
+ */
+&i2c2 {
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * I2c bus connected with temperature sensors on CMM.
+ */
+&i2c3 {
+	status = "okay";
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c4 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with ADM1278.
+ */
+&i2c5 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander.
+ */
+&i2c6 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander and EPROMs.
+ */
+&i2c7 {
+	status = "okay";
+};
+
+/*
+ * I2C bus to Fan Control Boards.
+ */
+&i2c8 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		/* To Fan Control Board #1 */
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux168: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux169: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux170: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux171: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux172: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux173: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux174: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux175: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #2 */
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux176: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux177: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux178: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux179: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux180: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux181: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux182: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux183: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #3 */
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux184: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux185: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux186: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux187: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux188: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux189: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux190: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux191: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #4 */
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux192: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux193: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux194: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux195: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux196: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux197: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux198: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux199: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * I2C bus to CMM CPLD.
+ */
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&vhub {
+	status = "disabled";
+};
+
+&sdhci0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+&sdhci1 {
+	status = "disabled";
+};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x2000000>;
+			label = "flash1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
new file mode 100644
index 0000000000000..b5cd4c7800b05
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Elbert BMC";
+	compatible = "facebook,elbert-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+
+		/*
+		 * 8 child channels of PCA9548 2-0075.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * 8 child channels of PCA9548 5-0075.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c2 {
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c5 {
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+/*
+ * BMC's "mac3" controller is connected to BCM53134P's IMP_RGMII port
+ * directly (fixed link, no PHY in between).
+ * Note: BMC's "mdio0" controller is connected to BCM53134P's MDIO
+ * interface, and the MDIO channel will be enabled in dts later, when
+ * BCM53134 is added to "bcm53xx" DSA driver.
+ */
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
new file mode 100644
index 0000000000000..6b319f34a9b98
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
@@ -0,0 +1,1251 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Fuji BMC";
+	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0077) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (24-0071) provides 8 channels connecting to
+		 * PDB-Left.
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * PCA9548 (25-0072) provides 8 channels connecting to
+		 * PDB-Right.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * PCA9548 (26-0076) provides 8 channels connecting to
+		 * FCM1.
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * PCA9548 (27-0076) provides 8 channels connecting to
+		 * FCM2.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * PCA9548 (40-0076) provides 8 channels connecting to
+		 * PIM1.
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * PCA9548 (41-0076) provides 8 channels connecting to
+		 * PIM2.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * PCA9548 (42-0076) provides 8 channels connecting to
+		 * PIM3.
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * PCA9548 (43-0076) provides 8 channels connecting to
+		 * PIM4.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * PCA9548 (44-0076) provides 8 channels connecting to
+		 * PIM5.
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * PCA9548 (45-0076) provides 8 channels connecting to
+		 * PIM6.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * PCA9548 (46-0076) provides 8 channels connecting to
+		 * PIM7.
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * PCA9548 (47-0076) provides 8 channels connecting to
+		 * PIM8.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <3>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <0>,	/* device reg=<1> does not exist */
+			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+		eeprom@2 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <2>;
+		};
+	};
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				shunt-resistor-micro-ohms = <1500>;
+			};
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					lp5012@14 {
+						compatible = "ti,lp5012";
+						reg = <0x14>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						multi-led@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "sys";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@1 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <1>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "fan";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@2 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <2>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "psu";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@3 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <3>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "smb";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+					};
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/*
+	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts
new file mode 100644
index 0000000000000..60e875ac24614
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Galaxy 100 BMC";
+	compatible = "facebook,galaxy100-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 3>, <&adc 4>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x2000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+
+&i2c9 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644
index 0000000000000..7a53f54833a03
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Greatlakes BMC";
+	compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+				<&adc1 5>, <&adc1 6>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	no-hw-checksum;
+	use-ncsi;
+	mlx,multi-host;
+	ncsi-ctrl,start-redo-probe;
+	ncsi-ctrl,no-channel-monitor;
+	ncsi-package = <1>;
+	ncsi-channel = <1>;
+	ncsi-rexmit = <1>;
+	ncsi-timeout = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	mctp-controller;
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	// NIC EEPROM
+	eeprom@50 {
+		compatible = "st,24c32";
+		reg = <0x50>;
+	};
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	temperature-sensor@4f {
+		compatible = "lm75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc0 {
+	ref_voltage = <2500>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	ref_voltage = <2500>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+			&pinctrl_adc11_default &pinctrl_adc12_default
+			&pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+
+	gpio-line-names =
+	/*A0-A7*/ "","","","","","","","",
+	/*B0-B7*/ "power-bmc-nic","presence-ocp-debug",
+		  "power-bmc-slot1","power-bmc-slot2",
+		  "power-bmc-slot3","power-bmc-slot4","","",
+	/*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary",
+		  "reset-cause-nic-secondary","","","",
+	/*D0-D7*/ "","","","","","","","",
+	/*E0-E7*/ "","","","","","","","",
+	/*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button",
+		  "slot3-bmc-reset-button","slot4-bmc-reset-button",
+		  "","","","presence-emmc",
+	/*G0-G7*/ "","","","","","","","",
+	/*H0-H7*/ "","","","",
+		  "presence-mb-slot1","presence-mb-slot2",
+		  "presence-mb-slot3","presence-mb-slot4",
+	/*I0-I7*/ "","","","","","","bb-bmc-button","",
+	/*J0-J7*/ "","","","","","","","",
+	/*K0-K7*/ "","","","","","","","",
+	/*L0-L7*/ "","","","","","","","",
+	/*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","",
+	/*N0-N7*/ "","","","","bmc-ready","","","",
+	/*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable",
+	/*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable",
+		  "reset-cause-pcie-slot1","reset-cause-pcie-slot2",
+		  "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","",
+	/*Q0-Q7*/ "","","","","","","","",
+	/*R0-R7*/ "","","","","","","","",
+	/*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","",
+	/*T0-T7*/ "","","","","","","","",
+	/*U0-U7*/ "","","","","","","","GND",
+	/*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button",
+		  "bmc-slot3-ac-button","bmc-slot4-ac-button",
+		  "","","","",
+	/*W0-W7*/ "","","","","","","","",
+	/*X0-X7*/ "","","","","","","","",
+	/*Y0-Y7*/ "","","","reset-cause-emmc","","","","",
+	/*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
new file mode 100644
index 0000000000000..230d16cd99672
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
@@ -0,0 +1,1339 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Minipack 100 BMC";
+	compatible = "facebook,minipack-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default serial aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+
+		/*
+		 * i2c switch 2-0070, pca9548, 8 child channels assigned
+		 * with bus number 16-23.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * i2c switch 8-0070, pca9548, 8 child channels assigned
+		 * with bus number 24-31.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * i2c switch 9-0070, pca9548, 8 child channels assigned
+		 * with bus number 32-39.
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * i2c switch 11-0070, pca9548, 8 child channels assigned
+		 * with bus number 40-47.
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * I2C Switch 24-0071 (channel #0 of 8-0070): 8 channels for
+		 * connecting to left PDB (Power Distribution Board).
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * I2C Switch 25-0072 (channel #1 of 8-0070): 8 channels for
+		 * connecting to right PDB (Power Distribution Board).
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * I2C Switch 26-0076 (channel #2 of 8-0070): 8 channels for
+		 * connecting to top FCM (Fan Control Module).
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * I2C Switch 27-0076 (channel #3 of 8-0070): 8 channels for
+		 * connecting to bottom FCM (Fan Control Module).
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * I2C Switch 40-0073 (channel #0 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #1 (1-based).
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * I2C Switch 41-0073 (channel #1 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #2 (1-based).
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * I2C Switch 42-0073 (channel #2 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #3 (1-based).
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * I2C Switch 43-0073 (channel #3 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #4 (1-based).
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * I2C Switch 44-0073 (channel #4 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #5 (1-based).
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * I2C Switch 45-0073 (channel #5 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #6 (1-based).
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * I2C Switch 46-0073 (channel #6 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #7 (1-based).
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * I2C Switch 47-0073 (channel #7 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #8 (1-based).
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "debug console=ttyS1,9600n8 root=/dev/ram rw";
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+/*
+ * Both firmware flashes are 64MB on Minipack BMC.
+ */
+&fmc_flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * u-boot partition: 384KB.
+		 */
+		u-boot@0 {
+			reg = <0x0 0x60000>;
+			label = "u-boot";
+		};
+
+		/*
+		 * u-boot environment variables: 128KB.
+		 */
+		u-boot-env@60000 {
+			reg = <0x60000 0x20000>;
+			label = "env";
+		};
+
+		/*
+		 * FIT image: 55.5 MB.
+		 */
+		fit@80000 {
+			reg = <0x80000 0x3780000>;
+			label = "fit";
+		};
+
+		/*
+		 * "data0" partition (8MB) is reserved for persistent
+		 * data store.
+		 */
+		data0@3800000 {
+			reg = <0x3800000 0x800000>;
+			label = "data0";
+		};
+
+		/*
+		 * "flash0" partition (covering the entire flash) is
+		 * explicitly created to avoid breaking legacy applications.
+		 */
+		flash0@0 {
+			reg = <0x0 0x4000000>;
+			label = "flash0";
+		};
+	};
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_ncts1_default
+		     &pinctrl_ndsr1_default
+		     &pinctrl_ndtr1_default
+		     &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <400000>;
+	multi-master;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/*
+	 * I2C Switch 2-0070 is connecting to SCM (System Controller
+	 * Module).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		/*
+		 * I2C Switch 8-0070 channel #0: connecting to left PDB
+		 * (Power Distribution Board).
+		 */
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #1: connecting to right PDB
+		 * (Power Distribution Board).
+		 */
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #2: connecting to top FCM
+		 * (Fan Control Module).
+		 */
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #3: connecting to bottom
+		 * FCM (Fan Control Module).
+		 */
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	/*
+	 * I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB
+	 * (Switch Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		/*
+		 * I2C Switch 11-0070 channel #0: connecting to PIM
+		 * (Port Interface Module) #1 (1-based).
+		 */
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #1: connecting to PIM
+		 * (Port Interface Module) #2 (1-based).
+		 */
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #2: connecting to PIM
+		 * (Port Interface Module) #3 (1-based).
+		 */
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #3: connecting to PIM
+		 * (Port Interface Module) #4 (1-based).
+		 */
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #4: connecting to PIM
+		 * (Port Interface Module) #5 (1-based).
+		 */
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #5: connecting to PIM
+		 * (Port Interface Module) #6 (1-based).
+		 */
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #6: connecting to PIM
+		 * (Port Interface Module) #7 (1-based).
+		 */
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #7: connecting to PIM
+		 * (Port Interface Module) #8 (1-based).
+		 */
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
new file mode 100644
index 0000000000000..b6b16356f571a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+// Author: Vijay Khemka <vijaykhemka@fb.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook TiogaPass BMC";
+	compatible = "facebook,tiogapass-bmc", "aspeed,ast2500";
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+
+		/*
+		 * Hardcode the bus number of i2c switches' channels to
+		 * avoid breaking the legacy applications.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&lpc_ctrl {
+	// Enable lpc clock
+	status = "okay";
+};
+
+&uart1 {
+	// Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	// SoL Host Console
+	status = "okay";
+};
+
+&uart3 {
+	// SoL BMC Console
+	status = "okay";
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&kcs2 {
+	// BMC KCS channel 2
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	// BMC KCS channel 3
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"BMC_CPLD_FPGA_SEL","","","","","","","",
+	/*B0-B7*/	"","BMC_DEBUG_EN","","","","BMC_PPIN","PS_PWROK",
+			"IRQ_PVDDQ_GHJ_VRHOT_LVT3",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"BIOS_MRC_DEBUG_MSG_DIS","BOARD_REV_ID0","",
+			"BOARD_REV_ID1","IRQ_DIMM_SAVE_LVT3","BOARD_REV_ID2",
+			"CPU_ERR0_LVT3_BMC","CPU_ERR1_LVT3_BMC",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON",
+			"POWER_OUT","NMI_BUTTON","","CPU0_PROCHOT_LVT3_ BMC",
+			"CPU1_PROCHOT_LVT3_ BMC",
+	/*F0-F7*/	"IRQ_PVDDQ_ABC_VRHOT_LVT3","",
+			"IRQ_PVCCIN_CPU0_VRHOT_LVC3",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3",
+			"IRQ_PVDDQ_KLM_VRHOT_LVT3","","P3VBAT_BRIDGE_EN","",
+	/*G0-G7*/	"CPU_ERR2_LVT3","CPU_CATERR_LVT3","PCH_BMC_THERMTRIP",
+			"CPU0_SKTOCC_LVT3","","","","BIOS_SMI_ACTIVE",
+	/*H0-H7*/	"LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2",
+			"LED_POST_CODE_3","LED_POST_CODE_4","LED_POST_CODE_5",
+			"LED_POST_CODE_6","LED_POST_CODE_7",
+	/*I0-I7*/	"CPU0_FIVR_FAULT_LVT3","CPU1_FIVR_FAULT_LVT3",
+			"FORCE_ADR","UV_ADR_TRIGGER_EN","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"IRQ_UV_DETECT","IRQ_OC_DETECT","HSC_TIMER_EXP","",
+			"MEM_THERM_EVENT_PCH","PMBUS_ALERT_BUF_EN","","",
+	/*M0-M7*/	"CPU0_RC_ERROR","CPU1_RC_ERROR","","OC_DETECT_EN",
+			"CPU0_THERMTRIP_LATCH_LVT3",
+			"CPU1_THERMTRIP_LATCH_LVT3","","",
+	/*N0-N7*/	"","","","CPU_MSMI_LVT3","","BIOS_SPI_BMC_CTRL","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"BOARD_SKU_ID0","BOARD_SKU_ID1","BOARD_SKU_ID2",
+			"BOARD_SKU_ID3","BOARD_SKU_ID4","BMC_PREQ",
+			"BMC_PWR_DEBUG","RST_RSMRST",
+	/*Q0-Q7*/	"","","","","UARTSW_LSB","UARTSW_MSB",
+			"POST_CARD_PRES_BMC","PE_BMC_WAKE",
+	/*R0-R7*/	"","","BMC_TCK_MUX_SEL","BMC_PRDY",
+			"BMC_XDP_PRSNT_IN","RST_BMC_PLTRST_BUF","SLT_CFG0",
+			"SLT_CFG1",
+	/*S0-S7*/	"THROTTLE","BMC_READY","","HSC_SMBUS_SWITCH_EN","",
+			"","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","BMC_FAULT","","",
+	/*V0-V7*/	"","","","FAST_PROCHOT_EN","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","GLOBAL_RST_WARN",
+			"CPU0_MEMABC_MEMHOT_LVT3_BMC",
+			"CPU0_MEMDEF_MEMHOT_LVT3_BMC",
+			"CPU1_MEMGHJ_MEMHOT_LVT3_BMC",
+			"CPU1_MEMKLM_MEMHOT_LVT3_BMC",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","BMC_JTAG_SEL","SIO_ONCONTROL","",
+			"","","",
+	/*Z0-Z7*/	"","SIO_POWER_GOOD","IRQ_PVDDQ_DEF_VRHOT_LVT3","",
+			"","","","",
+	/*AA0-AA7*/	"CPU1_SKTOCC_LVT3","IRQ_SML1_PMBUS_ALERT",
+			"SERVER_POWER_LED","","PECI_MUX_SELECT","UV_HIGH_SET",
+			"","POST_COMPLETE",
+	/*AB0-AB7*/	"IRQ_HSC_FAULT","OCP_MEZZA_PRES","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	use-ncsi;
+};
+
+&adc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	//Airmax Conn B, CPU0 PIROM, CPU1 PIROM
+};
+
+&i2c1 {
+	status = "okay";
+	//X24 Riser
+	i2c-switch@71 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux20: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux21: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux22: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux23: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp421@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux24: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux25: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux26: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux27: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp421@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux28: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux29: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux30: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux31: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+			};
+
+			i2c-switch@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+			};
+
+			i2c-switch@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+		};
+
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	// Mezz Management SMBus
+};
+
+&i2c3 {
+	status = "okay";
+	// SMBus to Board ID EEPROM
+};
+
+&i2c4 {
+	status = "okay";
+	// BMC Debug Header
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	// CPU Voltage regulators
+	regulator@48 {
+		compatible = "infineon,pxe1610";
+		reg = <0x48>;
+	};
+	regulator@4a {
+		compatible = "infineon,pxe1610";
+		reg = <0x4a>;
+	};
+	regulator@50 {
+		compatible = "infineon,pxe1610";
+		reg = <0x50>;
+	};
+	regulator@52 {
+		compatible = "infineon,pxe1610";
+		reg = <0x52>;
+	};
+	regulator@58 {
+		compatible = "infineon,pxe1610";
+		reg = <0x58>;
+	};
+	regulator@5a {
+		compatible = "infineon,pxe1610";
+		reg = <0x5a>;
+	};
+	regulator@68 {
+		compatible = "infineon,pxe1610";
+		reg = <0x68>;
+	};
+	regulator@70 {
+		compatible = "infineon,pxe1610";
+		reg = <0x70>;
+	};
+	regulator@72 {
+		compatible = "infineon,pxe1610";
+		reg = <0x72>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	//HSC, AirMax Conn A
+	adm1278@45 {
+		compatible = "adm1275";
+		reg = <0x45>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	//Mezz Sensor SMBus
+};
+
+&i2c9 {
+	status = "okay";
+	//USB Debug Connector
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
new file mode 100644
index 0000000000000..584efa5284500
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 100 BMC";
+	compatible = "facebook,wedge100-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x2000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+&i2c7 {
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts
new file mode 100644
index 0000000000000..6624855d8ebdf
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 40 BMC";
+	compatible = "facebook,wedge40-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		     &pinctrl_pwm1_default
+		     &pinctrl_pwm6_default
+		     &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
new file mode 100644
index 0000000000000..ed305948386f2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 400 BMC";
+	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+		gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		tpmdev@0 {
+			compatible = "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+/*
+ * Both firmware flashes are 128MB on Wedge400 BMC.
+ */
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout-128.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x8000000>;
+			label = "flash1";
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
+ * communication.
+ */
+&i2c0 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-switch@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdhci1 {
+	/*
+	 * DMA mode needs to be disabled to avoid conflicts with UHCI
+	 * Controller in AST2500 SoC.
+	 */
+	sdhci-caps-mask = <0x0 0x580000>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
new file mode 100644
index 0000000000000..5e61058742171
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook YAMP 100 BMC";
+	compatible = "facebook,yamp-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&mac1 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x2000000>;
+			label = "flash1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts
new file mode 100644
index 0000000000000..6bf2ff85a40e7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemitev2 BMC";
+	compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
+	aliases {
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		// VOLATAGE SENSOR
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0> , <&adc 1> , <&adc 2> ,  <&adc 3> ,
+		<&adc 4> , <&adc 5> , <&adc 6> ,  <&adc 7> ,
+		<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
+		<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+&uart1 {
+	// Host1 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	// Host2 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+
+};
+
+&uart3 {
+	// Host3 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	// Host4 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&vuart {
+	// Virtual UART
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+	mlx,multi-host;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&i2c1 {
+	//Host1 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb1@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	//Host2 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb3@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	//Host3 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb5@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c7 {
+	//Host4 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb7@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	//FRU EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	tmp421@4e {
+	//INLET TEMP
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	//OUTLET TEMP
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	//HSC
+	adm1278@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	//MEZZ_TEMP_SENSOR
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+	// Debug Card
+	multi-master;
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	//FSC
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
new file mode 100644
index 0000000000000..81902cbe662cb
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
@@ -0,0 +1,915 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bonnell";
+	compatible = "ibm,bonnell-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+
+		serial4 = &uart5;
+		i2c16 = &i2c11mux0chn0;
+		i2c17 = &i2c11mux0chn1;
+		i2c18 = &i2c11mux0chn2;
+		i2c19 = &i2c11mux0chn3;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/	"","","","","","","","",
+		/*B0-B7*/	"","","","","","","checkstop","",
+		/*C0-C7*/	"","","","","","","","",
+		/*D0-D7*/	"","","","","","","","",
+		/*E0-E7*/	"","","","","","","","",
+		/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","",
+		/*G0-G7*/	"fan0","fan1","","","","","","",
+		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
+		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+		/*J0-J7*/	"","","","","","","","",
+		/*K0-K7*/	"","","","","","","","",
+		/*L0-L7*/	"","","","","","","","",
+		/*M0-M7*/	"","","","","","","","",
+		/*N0-N7*/	"","","","","","","","",
+		/*O0-O7*/	"","","","usb-power","","","","",
+		/*P0-P7*/	"","","","","","","","",
+		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","","",
+		/*T0-T7*/	"","","","","","","","",
+		/*U0-U7*/	"","","","","","","","",
+		/*V0-V7*/	"","","","","","","","",
+		/*W0-W7*/	"","","","","","","","",
+		/*X0-X7*/	"","","","","","","","",
+		/*Y0-Y7*/	"","","","","","","","",
+		/*Z0-Z7*/	"","","","","","","","";
+
+	usb_power {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"",
+			"",
+			"DASD_BP_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@5a {
+		compatible = "acbel,fsg032";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "acbel,fsg032";
+		reg = <0x5b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"APSS_RESET_N",
+			"",
+			"N_MODE_CPU_N",
+			"",
+			"",
+			"P10_DCM_PRESENT",
+			"";
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "BOOT_RCVRY_TWI",
+			"BOOT_RCVRY_UART",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"PE_SWITCH_RSTB_N";
+	};
+
+	tmp435@4c {
+		compatible = "ti,tmp435";
+		reg = <0x4c>;
+	};
+
+	pca9849@75 {
+		compatible = "nxp,pca9849";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c11mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c11mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
new file mode 100644
index 0000000000000..c6f8f20914d19
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -0,0 +1,3723 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Everest";
+	compatible = "ibm,everest-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+		i2c300 = &cfam2_i2c0;
+		i2c301 = &cfam2_i2c1;
+		i2c310 = &cfam2_i2c10;
+		i2c311 = &cfam2_i2c11;
+		i2c312 = &cfam2_i2c12;
+		i2c313 = &cfam2_i2c13;
+		i2c314 = &cfam2_i2c14;
+		i2c315 = &cfam2_i2c15;
+		i2c402 = &cfam3_i2c2;
+		i2c403 = &cfam3_i2c3;
+		i2c410 = &cfam3_i2c10;
+		i2c411 = &cfam3_i2c11;
+		i2c414 = &cfam3_i2c14;
+		i2c415 = &cfam3_i2c15;
+		i2c416 = &cfam3_i2c16;
+		i2c417 = &cfam3_i2c17;
+		i2c500 = &cfam4_i2c0;
+		i2c501 = &cfam4_i2c1;
+		i2c510 = &cfam4_i2c10;
+		i2c511 = &cfam4_i2c11;
+		i2c512 = &cfam4_i2c12;
+		i2c513 = &cfam4_i2c13;
+		i2c514 = &cfam4_i2c14;
+		i2c515 = &cfam4_i2c15;
+		i2c602 = &cfam5_i2c2;
+		i2c603 = &cfam5_i2c3;
+		i2c610 = &cfam5_i2c10;
+		i2c611 = &cfam5_i2c11;
+		i2c614 = &cfam5_i2c14;
+		i2c615 = &cfam5_i2c15;
+		i2c616 = &cfam5_i2c16;
+		i2c617 = &cfam5_i2c17;
+		i2c700 = &cfam6_i2c0;
+		i2c701 = &cfam6_i2c1;
+		i2c710 = &cfam6_i2c10;
+		i2c711 = &cfam6_i2c11;
+		i2c712 = &cfam6_i2c12;
+		i2c713 = &cfam6_i2c13;
+		i2c714 = &cfam6_i2c14;
+		i2c715 = &cfam6_i2c15;
+		i2c802 = &cfam7_i2c2;
+		i2c803 = &cfam7_i2c3;
+		i2c810 = &cfam7_i2c10;
+		i2c811 = &cfam7_i2c11;
+		i2c814 = &cfam7_i2c14;
+		i2c815 = &cfam7_i2c15;
+		i2c816 = &cfam7_i2c16;
+		i2c817 = &cfam7_i2c17;
+
+		i2c16 = &i2c4mux0chn0;
+		i2c17 = &i2c4mux0chn1;
+		i2c18 = &i2c4mux0chn2;
+		i2c19 = &i2c5mux0chn0;
+		i2c20 = &i2c5mux0chn1;
+		i2c21 = &i2c5mux0chn2;
+		i2c22 = &i2c5mux0chn3;
+		i2c23 = &i2c6mux0chn0;
+		i2c24 = &i2c6mux0chn1;
+		i2c25 = &i2c6mux0chn2;
+		i2c26 = &i2c6mux0chn3;
+		i2c27 = &i2c14mux0chn0;
+		i2c28 = &i2c14mux0chn1;
+		i2c29 = &i2c14mux0chn2;
+		i2c30 = &i2c14mux0chn3;
+		i2c31 = &i2c14mux1chn0;
+		i2c32 = &i2c14mux1chn1;
+		i2c33 = &i2c14mux1chn2;
+		i2c34 = &i2c14mux1chn3;
+		i2c35 = &i2c15mux0chn0;
+		i2c36 = &i2c15mux0chn1;
+		i2c37 = &i2c15mux0chn2;
+		i2c38 = &i2c15mux0chn3;
+		i2c39 = &i2c15mux1chn0;
+		i2c40 = &i2c15mux1chn1;
+		i2c41 = &i2c15mux1chn2;
+		i2c42 = &i2c15mux1chn3;
+		i2c43 = &i2c15mux2chn0;
+		i2c44 = &i2c15mux2chn1;
+		i2c45 = &i2c15mux2chn2;
+		i2c46 = &i2c15mux2chn3;
+		i2c47 = &i2c8mux0chn0;
+		i2c48 = &i2c8mux0chn1;
+
+		serial4 = &uart5;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
+		spi40 = &cfam3_spi0;
+		spi41 = &cfam3_spi1;
+		spi42 = &cfam3_spi2;
+		spi43 = &cfam3_spi3;
+		spi50 = &cfam4_spi0;
+		spi51 = &cfam4_spi1;
+		spi52 = &cfam4_spi2;
+		spi53 = &cfam4_spi3;
+		spi60 = &cfam5_spi0;
+		spi61 = &cfam5_spi1;
+		spi62 = &cfam5_spi2;
+		spi63 = &cfam5_spi3;
+		spi70 = &cfam6_spi0;
+		spi71 = &cfam6_spi1;
+		spi72 = &cfam6_spi2;
+		spi73 = &cfam6_spi3;
+		spi80 = &cfam7_spi0;
+		spi81 = &cfam7_spi1;
+		spi82 = &cfam7_spi2;
+		spi83 = &cfam7_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: tcg_event_log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>; /* 16M */
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* RTC battery fault LED at the back */
+		led-rtc-battery {
+			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		/* BMC Card fault LED at the back */
+		led-bmc {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Identify LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"USERSPACE_RSTIND_BUFF","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/   "","","","","","","","";
+
+	usb_power {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca1: pca9552@62 {
+		compatible = "nxp,pca9552";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-ps0",
+			"presence-ps1",
+			"presence-ps2",
+			"presence-ps3",
+			"presence-pdb",
+			"presence-tpm",
+			"", "",
+			"presence-cp0",
+			"presence-cp1",
+			"presence-cp2",
+			"presence-cp3",
+			"presence-dasd",
+			"presence-lcd-op",
+			"presence-base-op",
+			"";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	pca2: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card1",
+			"presence-cable-card2",
+			"presence-cable-card3",
+			"presence-cable-card4",
+			"presence-cable-card5",
+			"expander-cable-card1",
+			"expander-cable-card2",
+			"expander-cable-card3",
+			"expander-cable-card4",
+			"expander-cable-card5";
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c01: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c01-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c01-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c02: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c02-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c02-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c03: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c03-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c03-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca3: pca9552@66 {
+		compatible = "nxp,pca9552";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card6",
+			"presence-cable-card7",
+			"presence-cable-card8",
+			"presence-cable-card9",
+			"presence-cable-card10",
+			"presence-cable-card11",
+			"expander-cable-card6",
+			"expander-cable-card7",
+			"expander-cable-card8",
+			"expander-cable-card9",
+			"expander-cable-card10",
+			"expander-cable-card11";
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c04: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c04-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c04-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c05: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c05-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c05-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c06: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c06-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c06-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c07: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c07-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c07-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			};
+
+			pca_cable_card_c08: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c08-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c08-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c09: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c09-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c09-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c10: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c11: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c11-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c11-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+
+	pca_pcie_slot: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@1 {
+			label = "pcieslot-c01";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot-c02";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot-c03";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot-c04";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcieslot-c05";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcieslot-c06";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcieslot-c07";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcieslot-c08";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot-c09";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot-c10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot-c11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	pic0_dimm: pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_dimm: pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic2_dimm: pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm32";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm33";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm34";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm35";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm36";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm37";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm38";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm39";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm40";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm41";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm42";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm43";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm44";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm45";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm46";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm47";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic3_dimm: pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm48";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm49";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm50";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm51";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm52";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm53";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm54";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm55";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm56";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm57";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm58";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm59";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm60";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm61";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm62";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm63";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic0_vrm_misc: pca9552@34 {
+		compatible = "ibm,pca9552";
+		reg = <0x34>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "tpm";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu3-c61";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu0-c14";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector3";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector4";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector5";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm4";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm5";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm6";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm7";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_vrm_misc: pca9552@35 {
+		compatible = "ibm,pca9552";
+		reg = <0x35>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "dasd-backplane";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "power-distribution";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu1-c19";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu2-c56";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector0";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector2";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm0";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm1";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm2";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm3";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm8";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm9";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm10";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm11";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		idle-state = <1>;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c32";
+				reg = <0x51>;
+			};
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			pca_oppanel: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "front-sys-id0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "front-check-log0";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "front-enc-fault1";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "front-sys-pwron0";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			max31785@52 {
+				compatible = "maxim,max31785a";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x52>;
+
+				fan@0 {
+					compatible = "pmbus-fan";
+					reg = <0>;
+					tach-pulses = <2>;
+				};
+
+				fan@1 {
+					compatible = "pmbus-fan";
+					reg = <1>;
+					tach-pulses = <2>;
+				};
+
+				fan@2 {
+					compatible = "pmbus-fan";
+					reg = <2>;
+					tach-pulses = <2>;
+				};
+
+				fan@3 {
+					compatible = "pmbus-fan";
+					reg = <3>;
+					tach-pulses = <2>;
+				};
+			};
+
+			pca_fan_nvme: pca9552@60 {
+				compatible = "nxp,pca9552";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "nvme0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "nvme1";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "nvme2";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "nvme3";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@4 {
+					label = "nvme4";
+					reg = <4>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@5 {
+					label = "nvme5";
+					reg = <5>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@6 {
+					label = "nvme6";
+					reg = <6>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@7 {
+					label = "nvme7";
+					reg = <7>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@8 {
+					label = "nvme8";
+					reg = <8>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@9 {
+					label = "nvme9";
+					reg = <9>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@10 {
+					label = "fan0";
+					reg = <10>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@11 {
+					label = "fan1";
+					reg = <11>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@12 {
+					label = "fan2";
+					reg = <12>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@13 {
+					label = "fan3";
+					reg = <13>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			pca0: pca9552@61 {
+				compatible = "nxp,pca9552";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x61>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"","","","",
+					"","","","",
+					"","","","",
+					"presence-fan3",
+					"presence-fan2",
+					"presence-fan1",
+					"presence-fan0";
+			};
+		};
+	};
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c14mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-switch@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux2chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux2chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	/*
+	 * CFAM Reset is supposed to be active low but pass1 hardware is wired
+	 * active high.
+	 */
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {	/* DCM0_C0 */
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 { /* DCM0_C1 */
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@2,0 { /* DCM1_C0 */
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+			};
+
+			cfam2_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+			};
+
+			cfam2_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam2_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam2_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam2_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam2_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam2_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ2: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub2: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@3,0 { /* DCM1_C1 */
+		reg = <3 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <3>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+			};
+
+			cfam3_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+			};
+
+			cfam3_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam3_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam3_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam3_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam3_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam3_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ3: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub3: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@4,0 { /* DCM2_C0 */
+		reg = <4 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <4>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+			};
+
+			cfam4_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+			};
+
+			cfam4_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam4_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam4_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam4_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam4_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam4_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ4: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub4: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@5,0 { /* DCM2_C1 */
+		reg = <5 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <5>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+			};
+
+			cfam5_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+			};
+
+			cfam5_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam5_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam5_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam5_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam5_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam5_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ5: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub5: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@6,0 { /* DCM3_C0 */
+		reg = <6 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <6>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+			};
+
+			cfam6_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+			};
+
+			cfam6_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam6_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam6_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam6_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam6_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam6_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ6: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub6: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@7,0 { /* DCM3_C1 */
+		reg = <7 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <7>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+			};
+
+			cfam7_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+			};
+
+			cfam7_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam7_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam7_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam7_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam7_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam7_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ7: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub7: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+&fsi_occ2 {
+	reg = <3>;
+};
+
+&fsi_occ3 {
+	reg = <4>;
+};
+
+&fsi_occ4 {
+	reg = <5>;
+};
+
+&fsi_occ5 {
+	reg = <6>;
+};
+
+&fsi_occ6 {
+	reg = <7>;
+};
+
+&fsi_occ7 {
+	reg = <8>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts
new file mode 100644
index 0000000000000..f5f5b18c113a8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-rainier-4u.dts"
+
+/ {
+	model = "Rainier 1S4U";
+};
+
+&max {
+	/delete-node/ fan3;
+	/delete-node/ fan5;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts
new file mode 100644
index 0000000000000..342546a3c0f5a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-rainier.dts"
+
+/ {
+	model = "Rainier 4U";
+};
+
+&i2c3 {
+	power-supply@6a {
+		compatible = "ibm,cffps";
+		reg = <0x6a>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
new file mode 100644
index 0000000000000..7162e65b81156
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -0,0 +1,2420 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Rainier 2U";
+	compatible = "ibm,rainier-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+		i2c300 = &cfam2_i2c0;
+		i2c301 = &cfam2_i2c1;
+		i2c310 = &cfam2_i2c10;
+		i2c311 = &cfam2_i2c11;
+		i2c312 = &cfam2_i2c12;
+		i2c313 = &cfam2_i2c13;
+		i2c314 = &cfam2_i2c14;
+		i2c315 = &cfam2_i2c15;
+		i2c402 = &cfam3_i2c2;
+		i2c403 = &cfam3_i2c3;
+		i2c410 = &cfam3_i2c10;
+		i2c411 = &cfam3_i2c11;
+		i2c414 = &cfam3_i2c14;
+		i2c415 = &cfam3_i2c15;
+		i2c416 = &cfam3_i2c16;
+		i2c417 = &cfam3_i2c17;
+
+		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+		i2c20 = &i2c4mux0chn0;
+		i2c21 = &i2c4mux0chn1;
+		i2c22 = &i2c4mux0chn2;
+		i2c23 = &i2c5mux0chn0;
+		i2c24 = &i2c5mux0chn1;
+		i2c25 = &i2c6mux0chn0;
+		i2c26 = &i2c6mux0chn1;
+		i2c27 = &i2c6mux0chn2;
+		i2c28 = &i2c6mux0chn3;
+		i2c29 = &i2c11mux0chn0;
+		i2c30 = &i2c11mux0chn1;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
+		spi40 = &cfam3_spi0;
+		spi41 = &cfam3_spi1;
+		spi42 = &cfam3_spi2;
+		spi43 = &cfam3_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	i2c2mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		i2c-parent = <&i2c2>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+
+		i2c2mux0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC Card fault LED at the back */
+		bmc-ingraham0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure ID LED at the back */
+		rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","pcieslot-power","","","",
+	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+	"power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	i2c3_mux_oe_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "I2C3_MUX_OE_N";
+	};
+
+	usb_power {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	/*
+	 * CFAM Reset is supposed to be active low but pass1 hardware is wired
+	 * active high.
+	 */
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+                };
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+                };
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@2,0 {
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+			};
+
+			cfam2_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+			};
+
+			cfam2_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam2_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam2_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam2_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam2_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam2_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ2: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub2: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@3,0 {
+		reg = <3 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <3>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+			};
+
+			cfam3_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+			};
+
+			cfam3_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam3_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam3_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam3_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam3_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam3_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ3: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub3: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+&fsi_occ2 {
+	reg = <3>;
+};
+
+&fsi_occ3 {
+	reg = <4>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca_pres1: tca9554@20{
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"DASD_BP2_PRESENT_N",
+			"DASD_BP1_PRESENT_N",
+			"DASD_BP0_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	pca_pres1: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+			"", "", "", "", "", "";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	pca9546@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard0-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard0-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	pca9546@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard3-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard3-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard4-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard4-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	tmp275@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+
+	pca9546@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "pcieslot0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "pcieslot1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "cpu1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu-vrm1";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "lcd-russel";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "cpu0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "dasd-pyramid0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "dasd-pyramid1";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "dasd-pyramid2";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu0-vrm0";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "rtc-battery";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "base-blyth";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot6";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot7";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot8";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "pcieslot9";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pcieslot10";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pcieslot11";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "tpm-wilson";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	max: max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+
+		fan2: fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+		};
+
+		fan3: fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+		};
+
+		fan4: fan@4 {
+			compatible = "pmbus-fan";
+			reg = <4>;
+			tach-pulses = <2>;
+		};
+
+		fan5: fan@5 {
+			compatible = "pmbus-fan";
+			reg = <5>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca0: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "fan0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "fan1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "fan2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "fan3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "fan4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "fan5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca_pres3: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"", "", "", "", "", "", "", "",
+			"", "", "", "", "", "", "power-config-full-load", "";
+	};
+
+	pca_pres2: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+			"", "", "", "";
+	};
+
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	pca9546@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme8";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme9";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme10";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme11";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme12";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme13";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme14";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme15";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
new file mode 100644
index 0000000000000..208b0f094ed95
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
@@ -0,0 +1,912 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "FP5280G2 BMC";
+	compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 3)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 0)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan6-presence {
+			label = "fan6-presence";
+			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan7-presence {
+			label = "fan7-presence";
+			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "power";
+			/* TODO: dummy gpio */
+			gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		init-ok {
+			label = "init-ok";
+			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshealth {
+			label = "front-syshealth";
+			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(Z, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","front-psu","checkstop","cfam-reset","","","init-ok",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"ps0-presence","ps1-presence","","","front-memory","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","front-fan","","","",
+	/*I0-I7*/	"front-syshealth","front-syshot","mux-gpios","enable-gpios","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","power","trans-gpios","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","identify",
+	/*AA0-AA7*/	"clock-gpios","","data-gpios","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* Test Point */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	/* LCD */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		label = "fru";
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "inlet";
+	};
+
+	tmp112@49 {
+		compatible = "ti,tmp112";
+		reg = <0x49>;
+		label = "outlet";
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "psu_inlet";
+			};
+
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "ocp_zone";
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "bmc_zone";
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			tmp112@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+		};
+
+	};
+};
+
+&i2c3 {
+	/* Riser Card */
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds3232";
+		reg = <0x68>;
+	};
+};
+
+&i2c5 {
+	/* vr  */
+	status = "okay";
+};
+
+&i2c6 {
+	/* bp card */
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+			};
+
+			adm1278@13 {
+				compatible = "adi,adm1278";
+				reg = <0x13>;
+			};
+
+			adm1278@50 {
+				compatible = "adi,adm1278";
+				reg = <0x50>;
+			};
+
+			adm1278@53 {
+				compatible = "adi,adm1278";
+				reg = <0x53>;
+			};
+
+		};
+
+		/*pcie riser*/
+
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca0: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+	};
+
+	pca1: pca9555@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca2: pca9555@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca3: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca4: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca5: pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+};
+
+&i2c9 {
+	/* cpld */
+	status = "okay";
+};
+
+&i2c10 {
+	/* hdd bp */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "inspur,ipsps1";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "inspur,ipsps1";
+		reg = <0x59>;
+	};
+};
+
+&i2c12 {
+	/* odcc */
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&ibt {
+	status = "okay";
+
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+	 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default
+		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+	};
+
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
new file mode 100644
index 0000000000000..b3c1e3ba58318
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "NF5280M6 BMC";
+	compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+
+		bmc_alive {
+			label = "bmc_alive";
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			led-pattern = <1000 1000>;
+		};
+
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		<&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&gpio {
+	status = "okay";
+	/* Enable GPIOE0 and GPIOE2 pass-through by default */
+	pinctrl-names = "pass-through";
+	pinctrl-0 = <&pinctrl_gpie0_default
+			&pinctrl_gpie2_default>;
+	gpio-line-names =
+	/*A0-A7*/	"","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
+	/*B0-B7*/	"BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
+				"FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
+				"FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
+				"BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
+	/*E0-E7*/	"FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
+				"FM_BOARD_ID4","FM_BOARD_ID5","","",
+	/*F0-F7*/	"PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
+				"BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
+				"RST_GLB_RST_WARN_N",
+	/*G0-G7*/	"IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
+				"BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
+	/*H0-H7*/	"JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
+				"FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
+	/*I0-I7*/	"FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
+				"FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
+	/*J0-J7*/	"FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
+				"VGA_HSYNC","VGA_VSYNC","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
+	/*R0-R7*/	"SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
+				"DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
+				"RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
+	/*S0-S7*/	"BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
+				"GPIOS5_BMC","","GPIOS7_BMC",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
+				"GPIOZ5","","",
+	/*AA0-AA7*/	"FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
+				"FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
+	/*AB0-AB7*/	"RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	/* FP_LCD */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		label = "fru";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "inlet";
+	};
+
+	tmp112@49 {
+		compatible = "ti,tmp112";
+		reg = <0x49>;
+		label = "outlet";
+	};
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+
+	pca9548@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+	};
+
+	pca9548@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+	};
+};
+
+&i2c4 {
+	/* IPMB */
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	adm1278@33 {
+		compatible = "adi,adm1293";
+		reg = <0x33>;
+	};
+
+	adm1278@32 {
+		compatible = "adi,adm1293";
+		reg = <0x32>;
+	};
+
+	adm1278@20 {
+		compatible = "adi,adm1293";
+		reg = <0x20>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca0: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca1: pca9555@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca2: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca3: pca9555@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c9 {
+	/* cpld */
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	pca4: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca5: pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "inspur,ipsps1";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "inspur,ipsps1";
+		reg = <0x59>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default
+		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+	};
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&kcs4 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca4>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+	 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vuart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts
new file mode 100644
index 0000000000000..5a98a19f445e0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ON5263M5 BMC";
+	compatible = "inspur,on5263m5-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlycon";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+	    bmc_alive {
+		label = "bmc_alive";
+		gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+		linux,default-trigger = "timer";
+	    };
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	adm1278@11 {
+		  compatible = "adi,adm1278";
+		  reg = <0x11>;
+	};
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+};
+
+&adc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts
new file mode 100644
index 0000000000000..d5b7d28cda887
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Intel Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "S2600WF BMC";
+	compatible = "intel,s2600wf-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
new file mode 100644
index 0000000000000..caf66651e5b5d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 Inventec Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+       model = "TRANSFORMERS BMC";
+       compatible = "inventec,transformer-bmc", "aspeed,ast2600";
+
+       aliases {
+               serial4 = &uart5;
+       };
+
+       chosen {
+               stdout-path = &uart5;
+               bootargs = "console=ttyS4,115200n8";
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x80000000 0x80000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               // UID led
+               uid {
+                       label = "UID_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+               };
+
+               // Heart beat led
+               heartbeat {
+                       label = "HB_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
+&mac3 {
+       status = "okay";
+       phy-mode = "rgmii";
+       phy-handle = <&ethphy0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&fmc {
+       status = "okay";
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+#include "openbmc-flash-layout.dtsi"
+       };
+
+       flash@1 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc2";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+       };
+};
+
+&spi1 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_spi1_default>;
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bios";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <1>;
+               spi-rx-bus-width = <1>;
+       };
+};
+
+&wdt1 {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart5 {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+
+       //Set bmc' slave address;
+       bmc_slave@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c2 {
+       status = "okay";
+};
+
+&i2c3 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+       eeprom@50 {
+               compatible = "atmel,24c512";
+               reg = <0x50>;
+               pagesize = <128>;
+       };
+};
+
+&i2c5 {
+       status = "okay";
+};
+
+&i2c6 {
+       status = "okay";
+
+       tmp75@49 {
+               compatible = "ti,tmp75";
+               reg = <0x49>;
+       };
+
+       tmp75@4f {
+               compatible = "ti,tmp75";
+               reg = <0x4f>;
+       };
+
+       tmp468@48 {
+               compatible = "ti,tmp468";
+               reg = <0x48>;
+       };
+};
+
+&i2c7 {
+       status = "okay";
+       adm1278@40 {
+               compatible = "adi,adm1278";
+               reg = <0x40>;
+       };
+};
+
+
+&i2c8 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+
+       eeprom@51 {
+               compatible = "atmel,24c512";
+               reg = <0x51>;
+               pagesize = <128>;
+       };
+
+       eeprom@53 {
+               compatible = "atmel,24c512";
+               reg = <0x53>;
+               pagesize = <128>;
+       };
+};
+
+&i2c9 {
+       // M.2
+       status = "okay";
+};
+
+&i2c10 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-switch@71 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x71>;
+       };
+
+       i2c-switch@73 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x73>;
+       };
+};
+
+&i2c11 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-switch@70 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x70>;
+
+               pcie_eeprom_riser1: i2c@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser2: i2c@1 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <1>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser3: i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <2>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+       };
+};
+
+&i2c12 {
+       status = "okay";
+
+       psu0:psu0@58 {
+               compatible = "pmbus";
+               reg = <0x58>;
+       };
+};
+
+&gpio0 {
+       status = "okay";
+       gpio-line-names =
+       /*A0-A7*/   "","","","","","","","",
+       /*B0-B7*/   "presence-ps0","power-chassis-good","","","","","presence-ps1","",
+       /*C0-C7*/   "","","","","","","","",
+       /*D0-D7*/   "","","","","","","","",
+       /*E0-E7*/   "","","","","","","","",
+       /*F0-F7*/   "","","","","power-chassis-control","","","",
+       /*G0-G7*/   "","","jtag-mux","","","","","",
+       /*H0-H7*/   "","","","","reset-button","power-button","","",
+       /*I0-I7*/   "","","","","","","","",
+       /*J0-J7*/   "","","","","","","","",
+       /*K0-K7*/   "","","","","","","","",
+       /*L0-L7*/   "","","","","","","","",
+       /*M0-M7*/   "","","","","","","","",
+       /*N0-N7*/   "","","","","","","","",
+       /*O0-O7*/   "","","","","","","","",
+       /*P0-P7*/   "","","","tck-mux","","","","",
+       /*Q0-Q7*/   "","","","","","","","",
+       /*R0-R7*/   "","","","","","","","",
+       /*S0-S7*/   "","","","","","","","",
+       /*T0-T7*/   "","","","","","","","",
+       /*U0-U7*/   "","nmi-button","","","","","","",
+       /*V0-V7*/   "","","","","power-config-full-load","","","",
+       /*W0-W7*/   "","","","","","","","",
+       /*X0-X7*/   "","","","","","","","",
+       /*Y0-Y7*/   "","","","","","","","",
+       /*Z0-Z7*/   "","","","","","","","",
+       /*AA0-AA7*/ "","","","","","","","",
+       /*AB0-AB7*/ "","","","","","","","",
+       /*AC0-AC7*/ "","","","","","","","";
+};
+
+&lpc_snoop {
+       status = "okay";
+       snoop-ports = <0x80>;
+};
+
+&emmc_controller {
+       status = "okay";
+};
+
+&emmc {
+       status = "okay";
+       non-removable;
+       max-frequency = <52000000>;
+       bus-width = <8>;
+};
+
+&vhub {
+       status = "okay";
+       aspeed,vhub-downstream-ports = <7>;
+       aspeed,vhub-generic-endpoints = <21>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb2ad_default>;
+};
+
+&rtc {
+       status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
new file mode 100644
index 0000000000000..8f543cca7c21f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
@@ -0,0 +1,569 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr630 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HR630 BMC";
+	compatible = "lenovo,hr630-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c14 = &i2c_rbp;
+		i2c15 = &i2c_fbp1;
+		i2c16 = &i2c_fbp2;
+		i2c17 = &i2c_fbp3;
+		i2c18 = &i2c_riser2;
+		i2c19 = &i2c_pcie4;
+		i2c20 = &i2c_riser1;
+		i2c21 = &i2c_ocp;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x00100000>; /* 1M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+		<&adc 8>, <&adc 9>, <&adc 10>,
+		<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+			&pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	/* temp1 inlet */
+	tmp75@4e {
+		compatible = "national,lm75";
+		reg = <0x4e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	/* temp2 outlet */
+	tmp75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;	/* may use mux@70 next. */
+
+		i2c_rbp: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_fbp1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_fbp2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_fbp3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+	i2c-switch@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;  /* may use mux@76 next. */
+
+		i2c_riser2: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_riser1: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_ocp: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "atmel,24c256";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+};
+
+&gpio {
+
+	pin_gpio_b5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+	};
+
+	pin_gpio_f0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "IRQ_BMC_PCH_NMI_R";
+	};
+
+	pin_gpio_f3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS0_RST_OUT_N";
+	};
+
+	pin_gpio_f4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT0_FAULT_LED";
+	};
+
+	pin_gpio_f5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT1_FAULT_LED";
+	};
+
+	pin_gpio_g4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FAN_PWR_CTL_N";
+	};
+
+	pin_gpio_g7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_PCIE_I2CMUX_N";
+	};
+
+	pin_gpio_h2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU1_FFS_N_R";
+	};
+
+	pin_gpio_h3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU2_FFS_N_R";
+	};
+
+	pin_gpio_i3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_INTRUDED_COVER";
+	};
+
+	pin_gpio_j2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_BIOS_UPDATE_N";
+	};
+
+	pin_gpio_j3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_HDD_I2CMUX_N";
+	};
+
+	pin_gpio_s2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_VGA_SW";
+	};
+
+	pin_gpio_s4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
+		output;
+		line-name = "VBAT_EN_N";
+	};
+
+	pin_gpio_s6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PU_BMC_GPIOS6";
+	};
+
+	pin_gpio_y0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S0";
+	};
+
+	pin_gpio_y1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S1";
+	};
+
+	pin_gpio_z0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_INT_N";
+	};
+
+	pin_gpio_z2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_RESET_N";
+	};
+
+	pin_gpio_z3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_PCH_SCI_LPC_N";
+	};
+
+	pin_gpio_z7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_POST_CMPLT_N";
+	};
+
+	pin_gpio_aa0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "HOST_BMC_USB_SEL";
+	};
+
+	pin_gpio_aa5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS1_RST_OUT_N";
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
new file mode 100644
index 0000000000000..bcc1820f5c073
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr855xg2 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HR855XG2 BMC";
+	compatible = "lenovo,hr855xg2-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c14 = &i2c_riser1;
+		i2c15 = &i2c_riser2;
+		i2c16 = &i2c_riser3;
+		i2c17 = &i2c_M2;
+		i2c18 = &channel_0;
+		i2c19 = &channel_1;
+		i2c20 = &channel_2;
+		i2c21 = &channel_3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x00100000>; /* 1M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+		<&adc 8>, <&adc 9>, <&adc 10>,<&adc 11>,
+		<&adc 12>,<&adc 13>,<&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc{
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c_riser1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_riser2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_riser3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_M2: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <90000>;
+	HotSwap@10 {
+		compatible = "adm1272";
+		reg = <0x10>;
+	};
+
+	VR@45 {
+		compatible = "pmbus";
+		reg = <0x45>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	/* temp1 */
+	tmp75@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	/* temp2 */
+	tmp75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c256";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default
+	&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+
+	fan@16 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&gpio {
+
+	pin_gpio_a1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "BMC_EMMC_RST_N";
+	};
+
+	pin_gpio_a3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "PCH_PWROK_BMC_FPGA";
+	};
+
+	pin_gpio_b5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+	};
+
+	pin_gpio_b7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "CPU_SM_WP";
+	};
+
+	pin_gpio_e0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PDB_PSU_SEL";
+	};
+
+	pin_gpio_e2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LOCATOR_LED_N";
+	};
+
+	pin_gpio_e5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_DBP_PRESENT_R1_N";
+	};
+
+	pin_gpio_e6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_ME_SECURITY_OVERRIDE_N";
+	};
+
+	pin_gpio_f0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_NMI_R";
+	};
+
+	pin_gpio_f1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU2_PROCDIS_BMC_N";
+	};
+
+	pin_gpio_f2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RM_THROTTLE_EN_N";
+	};
+
+	pin_gpio_f3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_PMBUS_ALERT_B_EN";
+	};
+
+	pin_gpio_f4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FORCE_NM_THROTTLE_N";
+	};
+
+	pin_gpio_f6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_CPU_PWR_DEBUG_N";
+	};
+
+	pin_gpio_g7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_PCIE_I2C_MUX_RST_N";
+	};
+
+	pin_gpio_h6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_DBP_PRESENT_R2_N";
+	};
+
+	pin_gpio_i3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPI_BMC_BIOS_WP_N";
+	};
+
+	pin_gpio_j1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_USB_SEL";
+	};
+
+	pin_gpio_j2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PDB_SMB_RST_N";
+	};
+
+	pin_gpio_j3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPI_BMC_BIOS_HOLD_N";
+	};
+
+	pin_gpio_l0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PDB_FAN_TACH_SEL";
+	};
+
+	pin_gpio_l1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SYS_RESET_BMC_FPGA_N";
+	};
+
+	pin_gpio_l4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_EFUSE_FAN_G1_EN";
+	};
+
+	pin_gpio_l5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_EFUSE_FAN_G2_EN";
+	};
+
+	pin_gpio_r6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU3_PROCDIS_BMC_N";
+	};
+
+	pin_gpio_r7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU4_PROCDIS_BMC_N";
+	};
+
+	pin_gpio_s1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "DBP_SYSPWROK_BMC";
+	};
+
+	pin_gpio_s2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCH_RST_RSMRST_N";
+	};
+
+	pin_gpio_s6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_HW_STRAP_5";
+	};
+
+	pin_gpio_z3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_PCH_SCI_LPC_N";
+	};
+
+	pin_gpio_aa0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FW_PSU_ALERT_EN_N";
+	};
+
+	pin_gpio_aa4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "DBP_CPU_PREQ_N";
+	};
+
+	pin_gpio_ab3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_WDTRST";
+	};
+
+	pin_gpio_ac6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ESPI_BMC_ALERT_N";
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts
new file mode 100644
index 0000000000000..3ef8358ff764a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts
@@ -0,0 +1,207 @@
+//SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Olympus BMC";
+	compatible = "microsoft,olympus-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		bmc_heartbeat {
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power_green {
+			gpios = <&gpio ASPEED_GPIO(U, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		power_amber {
+			gpios = <&gpio ASPEED_GPIO(U, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 =    <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 =    <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm2_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default
+			&pinctrl_pwm5_default
+			&pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
new file mode 100644
index 0000000000000..c0847636f20b9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Inventec Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Lanyang BMC";
+	compatible = "inventec,lanyang-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_boot_status {
+			label = "System_boot_status";
+			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		attention {
+			label = "Attention_locator";
+			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		plt_fault {
+			label = "Platform_fault";
+			gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_fault {
+			label = "Onboard_drive_fault";
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
+		};
+		bmc_err {
+			lable = "BMC_fault";
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		sys_err {
+			lable = "Sys_fault";
+			gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+		     &pinctrl_spi2cs0_default
+		     &pinctrl_spi2cs1_default
+		     &pinctrl_spi2miso_default
+		     &pinctrl_spi2mosi_default>;
+
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@55 {
+		compatible = "atmel,24c64";
+		reg = <0x55>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	tmp75@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+	pin_gpio_b0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_HDD1_PWR_EN";
+	};
+
+	pin_gpio_b5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_USB1_OCI2";
+	};
+
+	pin_gpio_h5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_CP0_PERST_ENABLE_R";
+	};
+
+	pin_gpio_z2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_PCA9546_U177_N";
+	};
+
+	pin_gpio_aa6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_CP0_RESET_N";
+	};
+
+	pin_gpio_aa7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_TPM_RESET_N";
+	};
+
+	pin_gpio_ab0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "BMC_USB_PWRON_N";
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
new file mode 100644
index 0000000000000..31ff19ef87a0b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Mowgli BMC";
+	compatible = "ibm,mowgli-bmc", "aspeed,ast2500";
+
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 2)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 0)>;
+		};
+
+		button-id {
+			label = "id-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
+		};
+
+		fan4 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-12v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>;
+	};
+
+	iio-hwmon-5v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 1>;
+	};
+
+	iio-hwmon-3v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 2>;
+	};
+
+	iio-hwmon-vdd {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 3>;
+	};
+
+	iio-hwmon-vcs {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>;
+	};
+
+	iio-hwmon-vdn {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	iio-hwmon-vio {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 9>;
+	};
+
+	iio-hwmon-vddra {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 11>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	iio-hwmon-vddrb {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 13>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "obmc-ubi";
+			};
+		};
+	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* CPU MFG CONN */
+
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* APSS */
+	/* CPLD */
+
+	/* PCA9516 (repeater) ->
+	 *    CLK Buffer 9FGS9092
+	 *    Power Supply 0
+	 *    Power Supply 1
+	 *    PCA 9552 LED
+	 */
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* CP0 VDD & VCS : IR35221 */
+	/* CP0 VDN & VIO : IR35221 */
+	/* CP0 VDDR : IR35221 */
+
+	ir35221@28 {
+		compatible = "infineon,ir35221";
+		reg = <0x28>;
+	};
+
+	ir35221@29 {
+		compatible = "infineon,ir35221";
+		reg = <0x29>;
+	};
+
+	ir35221@2d {
+		compatible = "infineon,ir35221";
+		reg = <0x2d>;
+	};
+
+};
+
+&i2c5 {
+	status = "disabled";
+};
+
+&i2c6 {
+	status = "disabled";
+};
+
+&i2c7 {
+	status = "disabled";
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	/* PCIe G3 x16 slot */
+};
+
+&i2c10 {
+	status = "disabled";
+};
+
+&i2c11 {
+	status = "okay";
+
+	/* CPLD */
+	/* TPM */
+	/* RTC RX8900CE */
+	/* TMP275A */
+	/* TMP275A */
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+};
+
+&i2c12 {
+	status = "disabled";
+};
+
+&i2c13 {
+	status = "disabled";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
new file mode 100644
index 0000000000000..ac0d666ca10ef
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Nicole BMC";
+	compatible = "yadro,nicole-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "platform:green:power";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			label = "platform:blue:indicator";
+			gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		fault {
+			label = "platform:red:fault";
+			gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		attention {
+			label = "platform:yellow:alarm";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	/* CPU0 characterization connector */
+};
+
+&i2c3 {
+	status = "okay";
+	/* CLK GEN SI5338 */
+};
+
+&i2c4 {
+	status = "okay";
+	/* Voltage regulators for CPU0 */
+};
+
+&i2c5 {
+	status = "okay";
+	/* Voltage regulators for CPU1 */
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	/* CPLD */
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","bmc_power_up","sys_pwrok_buf",
+			"func_mode0","func_mode1","func_mode2","","",
+	/*E0-E7*/	"","ncsi_cfg","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","power-button","","","","","",
+	/*P0-P7*/	"","fsi-trans","pm_rtc_adc_en","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","software_pwrgood","","","","","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","led-attention","fsi-data","led-fault",
+			"led-power","","","led-identify",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	func_mode0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func_mode1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func_mode2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	seq_cont {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	ncsi_cfg {
+		gpio-hog;
+		input;
+		gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
new file mode 100644
index 0000000000000..45631b47a7b39
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Palmetto BMC";
+	compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16M */
+		};
+
+		coldfire_memory: codefire_memory@5ee00000 {
+			reg = <0x5ee00000 0x00200000>;
+			no-map;
+		};
+
+		flash_memory: region@5c000000 {
+			no-map;
+			reg = <0x5C000000 0x02000000>; /* 32MB */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(A, 5) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 5)>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1debug_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		label = "pnor";
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flbusy_default &pinctrl_flwp_default
+
+			&pinctrl_vgahs_default &pinctrl_vgavs_default
+			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds3231";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp423@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	occ-hwmon@50 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi>;
+};
+
+&gpio {
+	pin_func_mode0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode0";
+	};
+
+	pin_func_mode1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 5)  GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode1";
+	};
+
+	pin_func_mode2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode2";
+	};
+
+	pin_gpio_a0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_FAN_RESERVED_N";
+	};
+
+	pin_gpio_a1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_WDT_N";
+	};
+
+	pin_gpio_b1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_BOOT_MODE";
+	};
+
+	pin_gpio_b2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_RESET_N";
+	};
+
+	pin_gpio_b7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPIVID_STBY_RESET_N";
+	};
+
+	pin_gpio_d1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_POWER_UP";
+	};
+
+	pin_gpio_f1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_BATTERY_TEST";
+	};
+
+	pin_gpio_f4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "AST_HW_FAULT_N";
+	};
+
+	pin_gpio_f5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "AST_SYS_FAULT_N";
+	};
+
+	pin_gpio_f7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FULL_SPEED_N";
+	};
+
+	pin_gpio_g3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FAN_ERROR_N";
+	};
+
+	pin_gpio_g4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_WDT_RST1_P";
+	};
+
+	pin_gpio_g5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_WDT_RST2_P";
+	};
+
+	pin_gpio_h0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PE_SLOT_TEST_EN_N";
+	};
+
+	pin_gpio_h1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_RTCRST_N";
+	};
+
+	pin_gpio_h2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SYS_PWROK_BMC";
+	};
+
+	pin_gpio_h7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_TPM_INT_N";
+	};
+};
+
+&fsi {
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "ibm,fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
new file mode 100644
index 0000000000000..893e621ecab11
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Romulus BMC";
+	compatible = "ibm,romulus-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		id-button {
+			label = "id-button";
+			gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Q, 7)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	/* PCIe slot 1 (x8) */
+	status = "okay";
+};
+
+&i2c7 {
+	/* PCIe slot 2 (x16) */
+	status = "okay";
+};
+
+&i2c8 {
+	/* PCIe slot 3 (x16) */
+	status = "okay";
+};
+
+&i2c9 {
+	/* PCIe slot 4 (x16) */
+	status = "okay";
+};
+
+&i2c10 {
+	/* PCIe slot 5 (x8) */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","nic_func_mode0","nic_func_mode1","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","led-fault","",
+				"led-identify","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","","fsi-trans","","","led-power","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","fsi-data","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	nic_func_mode0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	nic_func_mode1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	seq_cont {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts
new file mode 100644
index 0000000000000..bbf864f84d37f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts
@@ -0,0 +1,978 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Swift BMC";
+	compatible = "ibm,swift-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 5)>;
+		};
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(R, 7)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 0)>;
+		};
+
+		event-oppanel-presence {
+			label = "oppanel-presence";
+			gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(A, 7)>;
+		};
+
+		event-opencapi-riser-presence {
+			label = "opencapi-riser-presence";
+			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(I, 0)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-scm0-presence {
+			label = "scm0-presence";
+			gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-scm1-presence {
+			label = "scm1-presence";
+			gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-cpu0vrm-presence {
+			label = "cpu0vrm-presence";
+			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		event-cpu1vrm-presence {
+			label = "cpu1vrm-presence";
+			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-fanboost-presence {
+			label = "fanboost-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		fanboost {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		front-power {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		rear-fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-id {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x7F80000>;
+				label = "obmc-ubi";
+			};
+		};
+	};
+
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x7F80000>;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* MUX ->
+	 *    Samtec 1
+	 *    Samtec 2
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@4 {
+			compatible = "pmbus-fan";
+			reg = <4>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps2";
+		reg = <0x68>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps2";
+		reg = <0x69>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	si7021a20@20 {
+		compatible = "si,si7021a20";
+		reg = <0x20>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca1: pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"P9_SCM0_PRES",	"P9_SCM1_PRES",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+
+	ir35221@72 {
+		compatible = "infineon,ir35221";
+		reg = <0x72>;
+	};
+
+	pca2: pca9539@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+
+	ir35221@72 {
+		compatible = "infineon,ir35221";
+		reg = <0x72>;
+	};
+
+	pca3: pca9539@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+		};
+	};
+};
+
+&i2c11 {
+	/* MUX
+	 *   -> PCIe Slot 0
+	 *   -> PCIe Slot 1
+	 *   -> PCIe Slot 2
+	 *   -> PCIe Slot 3
+	 */
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&sdmmc {
+       status = "okay";
+};
+
+&sdhci1 {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_sd2_default>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
new file mode 100644
index 0000000000000..3f6010ef2b86f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -0,0 +1,887 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Tacoma";
+	compatible = "ibm,tacoma-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@b8000000 {
+			no-map;
+			reg = <0xb8000000 0x4000000>; /* 64M */
+		};
+
+		ramoops@bc000000 {
+			compatible = "ramoops";
+			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;	/* 16M */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(E, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+	iio-hwmon-bmp280 {
+		compatible = "iio-hwmon";
+		io-channels = <&bmp 1>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"fsi-mux","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"power-button","","","checkstop","","presence-ps1","","led-rear-fault",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","presence-ps0","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"led-rear-power","led-rear-id","","usb-power","","","","",
+	/*P0-P7*/	"","","","","","bmc-tpm-reset","","",
+	/*Q0-Q7*/	"cfam-reset","","","","","","","fsi-routing",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <36>, <270>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam0_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam0_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam0_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam0_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam0_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam0_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam0_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam0_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam1_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam1_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam1_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam1_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam1_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam1_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam1_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam1_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam1_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c102 = &cfam0_i2c2;
+		i2c103 = &cfam0_i2c3;
+		i2c104 = &cfam0_i2c4;
+		i2c105 = &cfam0_i2c5;
+		i2c106 = &cfam0_i2c6;
+		i2c107 = &cfam0_i2c7;
+		i2c108 = &cfam0_i2c8;
+		i2c109 = &cfam0_i2c9;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c200 = &cfam1_i2c0;
+		i2c201 = &cfam1_i2c1;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c204 = &cfam1_i2c4;
+		i2c205 = &cfam1_i2c5;
+		i2c206 = &cfam1_i2c6;
+		i2c207 = &cfam1_i2c7;
+		i2c208 = &cfam1_i2c8;
+		i2c209 = &cfam1_i2c9;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c212 = &cfam1_i2c12;
+		i2c213 = &cfam1_i2c13;
+		i2c214 = &cfam1_i2c14;
+	};
+
+};
+
+&i2c0 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	tpm: tpm@2e {
+		compatible = "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&uart5 {
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&pinctrl {
+	/* Hog these as no driver is probed for the entire LPC block */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpc_default>,
+		    <&pinctrl_lsirq_default>;
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
new file mode 100644
index 0000000000000..8a7fb55ab4893
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Vesnin BMC";
+	compatible = "yadro,vesnin-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16MB */
+		};
+		flash_memory: region@5c000000 {
+			no-map;
+			reg = <0x5c000000 0x02000000>; /* 32M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+		};
+		power_red {
+			gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		power_green {
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		id_blue {
+			gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		alarm_red {
+			gpios = <&gpio ASPEED_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		alarm_yel {
+			gpios = <&gpio ASPEED_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			linux,code = <74>;
+			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		event-identify {
+			label = "identify";
+			linux,code = <152>;
+			gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+        label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt";
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1debug_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp75@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	occ-hwmon@50 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x50>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	occ-hwmon@51 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x51>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	w83795g@2f {
+		compatible = "nuvoton,w83795g";
+		reg = <0x2f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	occ-hwmon@56 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x56>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	occ-hwmon@57 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x57>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "maxim,ds3231";
+		reg = <0x68>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	cd-inverted;
+	disable-wp;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
new file mode 100644
index 0000000000000..a20a532fc2805
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
@@ -0,0 +1,704 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Witherspoon BMC";
+	compatible = "ibm,witherspoon-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		vga_memory: region@9f000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32MM */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 5)>;
+		};
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 7)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 0)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		front-power {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rear-fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-id {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-power {
+			gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+	iio-hwmon-bmp280 {
+		compatible = "iio-hwmon";
+		io-channels = <&bmp 1>;
+	};
+
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","air-water","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","","","",
+	/*E0-E7*/	"fsi-data","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"presence-ps1","","led-rear-fault","led-rear-power",
+		        "led-rear-id","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","presence-ps0",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","fsi-trans","","","power-button","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "obmc-ubi";
+			};
+		};
+	};
+
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* MUX ->
+	 *    Samtec 1
+	 *    Samtec 2
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	/* MUX
+	 *   -> PCIe Slot 3
+	 *   -> PCIe Slot 4
+	 */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
new file mode 100644
index 0000000000000..0cb7b20ff3ab8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
@@ -0,0 +1,578 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Zaius BMC";
+	compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c15 = &i2cpcie0;
+		i2c16 = &i2cpcie1;
+		i2c17 = &i2cpcie2;
+		i2c19 = &i2cpcie3;
+		i2c20 = &i2cpcie4;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+	};
+
+	onewire0 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire1 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire2 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire3 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+
+		event-pcie-e2b-present{
+			label = "pcie-e2b-present";
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(E, 7)>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_boot_status {
+			label = "System boot status";
+			gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		attention {
+			label = "Attention";
+			gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		plt_fault {
+			label = "Platform fault";
+			gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		hdd_fault {
+			label = "Onboard drive fault";
+			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+		     &pinctrl_spi2cs0_default
+		     &pinctrl_spi2cs1_default
+		     &pinctrl_spi2miso_default
+		     &pinctrl_spi2mosi_default>;
+
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+
+	/* Power sequencer UCD90160 PMBUS @64h
+	 * FRU AT24C64D @50h
+	 * RTC PCF8523 @68h
+	 * Clock buffer 9DBL04 @6dh
+	 */
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cpcie0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2cpcie1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2cpcie2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2ctpm: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	/* MUX1 PCA9546A @71h
+	 *   PCIe 0
+	 *   PCIe 1
+	 *   PCIe 2
+	 *   TPM header
+	 */
+};
+
+&i2c2 {
+	status = "disabled";
+
+	/* OCP Mezz Connector A (OOB SMBUS) */
+};
+
+&i2c3 {
+	status = "disabled";
+
+	/* OCP Mezz Connector A (PCIe slot SMBUS) */
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cpcie3: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2cpcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+
+	/* MUX1 PCA9546A @71h
+	 *   PCIe 3
+	 *   PCIe 4
+	 */
+};
+
+
+&i2c5 {
+	status = "disabled";
+
+	/* CPU0 PRM 0.7V */
+	/* CPU0 PRM 1.2V CH03 */
+	/* CPU0 PRM 0.8V */
+	/* CPU0 PRM 1.2V CH47 */
+};
+
+&i2c6 {
+	status = "disabled";
+
+	/* CPU1 PRM 0.7V */
+	/* CPU1 PRM 1.2V CH03 */
+	/* CPU1 PRM 0.8V */
+	/* CPU1 PRM 1.2V CH47 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	pca9541a@70 {
+		compatible = "nxp,pca9541";
+		reg = <0x70>;
+
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hotswap@54 {
+				compatible = "ti,lm5066i";
+				reg = <0x54>;
+			};
+		};
+
+	};
+
+	vrm@64 {
+		compatible = "isil,isl68137";
+		reg = <0x64>;
+	};
+
+	vrm@40 {
+		compatible = "isil,isl68137";
+		reg = <0x40>;
+	};
+
+	vrm@60 {
+		compatible = "isil,isl68137";
+		reg = <0x60>;
+	};
+
+	vrm@43 {
+		compatible = "infineon,ir38064";
+		reg = <0x43>;
+	};
+
+	vrm@41 {
+		compatible = "isil,isl68137";
+		reg = <0x41>;
+	};
+
+	/* Master selector PCA9541A @70h (other master: CPU0)
+	 *   LM5066I PMBUS @10h
+	 */
+
+	/*
+	 * Brick will be one of these types/addresses.  Depending
+	 * on the board SKU only one is actually present and will successfully
+	 * instantiate while the others will fail the probe operation.
+	 * These are the PVT (and presumably beyond) addresses:
+	 *    12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah
+	 *    12V Quarter Brick DC/DC Converter Q54SH12050 @30h
+	 */
+	power-brick@6a {
+		compatible = "delta,dps800";
+		reg = <0x6a>;
+	};
+	power-brick@30 {
+		compatible = "delta,dps800";
+		reg = <0x30>;
+	};
+
+	/* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+	/* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
+	/* CPU0 VR ISL68137 0.8V PMBUS @60h */
+	/* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */
+	/* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
+	/* Master selector PCA9541A @70h (other master: CPU0)
+	 *   LM5066I PMBUS @10h
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	vrm@64 {
+		compatible = "isil,isl68137";
+		reg = <0x64>;
+	};
+
+	vrm@40 {
+		compatible = "isil,isl68137";
+		reg = <0x40>;
+	};
+
+	vrm@41 {
+		compatible = "isil,isl68137";
+		reg = <0x41>;
+	};
+
+	vrm@42 {
+		compatible = "infineon,ir38064";
+		reg = <0x42>;
+	};
+
+	vrm@60 {
+		compatible = "isil,isl68137";
+		reg = <0x60>;
+	};
+
+	/* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+	/* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */
+	/* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */
+	/* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
+	/* CPU1 VR ISL68137 0.8V PMBUS @60h */
+};
+
+
+&i2c9 {
+	status = "disabled";
+
+	/* Fan board */
+};
+
+&i2c10 {
+	status = "disabled";
+};
+
+&i2c11 {
+	status = "disabled";
+
+	/* GPU sideband */
+};
+
+&i2c12 {
+	status = "disabled";
+};
+
+&i2c13 {
+	status = "disabled";
+
+	/* MUX PI3USB102
+	 *   CPU0 debug
+	 *   CPU1 debug
+	 */
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+
+	pinctrl_gpioh_unbiased: gpioi_unbiased {
+		pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
+		bias-disable;
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpioh_unbiased>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","led-sys-boot-status","led-attention",
+				"led-fault",
+	/*E0-E7*/	"","","","","","","","presence-pcie-e2b",
+	/*F0-F7*/	"","","","","","","","checkstop",
+	/*G0-G7*/	"fsi-clock","fsi-data","","","","","","",
+	/*H0-H7*/	"onewire0","onewire1","onewire2","onewire3","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","iso_u164_en","","fsi-trans","",
+	/*P0-P7*/	"ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","",
+				"","fsi-mux","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","led-hdd-fault","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	line_iso_u146_en {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	ncsi_mux_en_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+
+	line_bmc_i2c2_sw_rst_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	line_bmc_i2c5_sw_rst_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts
new file mode 100644
index 0000000000000..a5e64ccc2b3a4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Portwell Neptune BMC";
+	compatible = "portwell,neptune-bmc", "aspeed,ast2500";
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		postcode0 {
+			label = "BMC_UP";
+			gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		postcode1 {
+			label = "BMC_HB";
+			gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+		postcode2 {
+			label = "FAULT";
+			gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		};
+		// postcode3-7 are GPIOH3-H7
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart1 {
+	// Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default
+		     &pinctrl_mdio1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
+		 <&syscon ASPEED_CLK_MAC2RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c1 {
+	status = "okay";
+	// To PCIe slot SMBUS
+};
+
+&i2c2 {
+	status = "okay";
+	// To LAN I210
+};
+
+&i2c3 {
+	status = "okay";
+	// SMBus to COMe AB
+};
+
+&i2c4 {
+	status = "okay";
+	// I2C to COMe AB
+};
+
+&i2c5 {
+	status = "okay";
+// 	USB Debug card
+	pca9555@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
new file mode 100644
index 0000000000000..259ef3f54c5cc
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "Qualcomm DC-SCM V1 BMC";
+	compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	/* Bootloader sets up the MAC to insert delay */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+
+	use-ncsi;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <133000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BMC_FLASH_MUX_SEL","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"BMC_FWSPI_RST_N","","GPIO_1_BMC_3V3","","","","","",
+	/*O0-O7*/	"JTAG_MUX_A","JTAG_MUX_B","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","SCMFPGA_SPARE_GPIO1_3V3",
+			"SCMFPGA_SPARE_GPIO2_3V3","SCMFPGA_SPARE_GPIO3_3V3",
+			"SCMFPGA_SPARE_GPIO4_3V3","SCMFPGA_SPARE_GPIO5_3V3",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*A0-A7*/	"GPI_1_BMC_1V8","","","","","",
+			"SCMFPGA_SPARE_GPIO1_1V8","SCMFPGA_SPARE_GPIO2_1V8",
+	/*B0-B7*/	"SCMFPGA_SPARE_GPIO3_1V8","SCMFPGA_SPARE_GPIO4_1V8",
+			"SCMFPGA_SPARE_GPIO5_1V8","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SPI1_RST_N","BIOS_FLASH_MUX_SEL","",
+			"","TPM2_PIRQ_N","TPM2_RST_N","",
+	/*E0-E7*/	"","","","","","","","";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
new file mode 100644
index 0000000000000..9605e53f5bbfc
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Quanta Q71L BMC";
+	compatible = "quanta,q71l-bmc", "aspeed,ast2400";
+
+	aliases {
+		i2c14 = &i2c_pcie2;
+		i2c15 = &i2c_pcie3;
+		i2c16 = &i2c_pcie6;
+		i2c17 = &i2c_pcie7;
+		i2c18 = &i2c_pcie1;
+		i2c19 = &i2c_pcie4;
+		i2c20 = &i2c_pcie5;
+		i2c21 = &i2c_pcie8;
+		i2c22 = &i2c_pcie9;
+		i2c23 = &i2c_pcie10;
+		i2c24 = &i2c_ssd1;
+		i2c25 = &i2c_ssd2;
+		i2c26 = &i2c_psu4;
+		i2c27 = &i2c_psu1;
+		i2c28 = &i2c_psu3;
+		i2c29 = &i2c_psu2;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x8000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@47800000 {
+			no-map;
+			reg = <0x47800000 0x00800000>; /* 8MB */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 11>;
+	};
+
+	i2c1mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* mux-gpios = <&sgpio 10 GPIO_ACTIVE_HIGH> */
+		i2c-parent = <&i2c1>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default
+			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* temp2 inlet */
+	tmp75@4c {
+		compatible = "ti,tmp75";
+		reg = <0x4c>;
+	};
+
+	/* temp3 */
+	tmp75@4e {
+		compatible = "ti,tmp75";
+		reg = <0x4e>;
+	};
+
+	/* temp1 */
+	tmp75@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	/* Baseboard FRU */
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+
+	/* FP FRU */
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* 0: PCIe Slot 2,
+	 *    Slot 3,
+	 *    Slot 6,
+	 *    Slot 7
+	 */
+	i2c-switch@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;  /* may use mux@77 next. */
+
+		i2c_pcie2: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie3: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_pcie6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_pcie7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	/* 0: PCIe Slot 1,
+	 *    Slot 4,
+	 *    Slot 5,
+	 *    Slot 8,
+	 *    Slot 9,
+	 *    Slot 10,
+	 *    SSD 1,
+	 *    SSD 2
+	 */
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;  /* may use mux@74 next. */
+
+		i2c_pcie1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_pcie5: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_pcie8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c_pcie9: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c_pcie10: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c_ssd1: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c_ssd2: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* BIOS FRU */
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* 0: PSU4
+	 *    PSU1
+	 *    PSU3
+	 *    PSU2
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c_psu4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			psu@59 {
+				compatible = "pmbus";
+				reg = <0x59>;
+			};
+		};
+
+		i2c_psu1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			psu@58 {
+				compatible = "pmbus";
+				reg = <0x58>;
+			};
+		};
+
+		i2c_psu3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			psu@58 {
+				compatible = "pmbus";
+				reg = <0x58>;
+			};
+		};
+
+		i2c_psu2: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			psu@59 {
+				compatible = "pmbus";
+				reg = <0x59>;
+			};
+		};
+	};
+
+	/* PDB FRU */
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* BMC FRU */
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c1mux {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Memory Riser 1 FRU */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+		};
+
+		/* Memory Riser 2 FRU */
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+		};
+
+		/* Memory Riser 3 FRU */
+		eeprom@52 {
+			compatible = "atmel,24c02";
+			reg = <0x52>;
+		};
+
+		/* Memory Riser 4 FRU */
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+		};
+	};
+
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Memory Riser 5 FRU */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+		};
+
+		/* Memory Riser 6 FRU */
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+		};
+
+		/* Memory Riser 7 FRU */
+		eeprom@52 {
+			compatible = "atmel,24c02";
+			reg = <0x52>;
+		};
+
+		/* Memory Riser 8 FRU */
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
new file mode 100644
index 0000000000000..46cbba6305b8f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Quanta Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Quanta S6Q BMC";
+	compatible = "quanta,s6q-bmc", "aspeed,ast2600";
+
+	aliases {
+		// bus 0
+		i2c20 = &SMB_HOST_DB2000_3V3AUX_SCL;
+		i2c21 = &U12_PCA9546_CH1;
+		i2c22 = &SMB_HOST_DB800_B_SCL;
+		i2c23 = &SMB_HOST_DB800_C_SCL;
+
+		// bus 1
+		i2c24 = &SMB_M2_P0_1V8AUX_SCL;
+		i2c25 = &SMB_M2_P1_1V8AUX_SCL;
+		i2c26 = &SMB_CPU_PIROM_3V3AUX_SCL;
+		i2c27 = &SMB_TEMP_3V3AUX_SCL;
+		i2c28 = &SMB_IPMB_3V3AUX_SSDSB_SCL;
+		i2c29 = &SMB_IPMB_3V3AUX_SCL;
+		i2c31 = &SMB_FB_SCL;
+
+		// bus 1 - Fan board
+		i2c32 = &SMB_IOEXP_SCL;
+		i2c33 = &SMB_PROGRAM_SCL;
+		i2c34 = &SMB_FB_SCL_CH2;
+		i2c35 = &SMB_FAN_SENSE_SCL;
+
+		// bus 6
+		i2c36 = &U197_PCA9546_CH0;
+		i2c37 = &U197_PCA9546_CH1;
+		i2c38 = &U197_PCA9546_CH2;
+		i2c39 = &U197_PCA9546_CH3;
+
+		//bus 7
+		i2c40 = &SMB_OCP_SFF_3V3AUX_SCL; //OCP1
+		i2c41 = &SMB_OCP_LFF_3V3AUX_SCL; //OCP2
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		BMC_HEARTBEAT_N {
+			label = "BMC_HEARTBEAT_N";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		BMC_LED_STATUS_AMBER_N {
+			label = "BMC_LED_STATUS_AMBER_N";
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		FM_ID_LED_N {
+			label = "FM_ID_LED_N";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 - A7*/	"", "", "", "", "", "", "", "",
+	/*B0 - B7*/	"", "", "", "", "", "", "", "",
+	/*C0 - C7*/	"", "", "", "", "", "", "", "",
+	/*D0 - D7*/	"", "", "", "", "", "", "", "",
+	/*E0 - E7*/	"", "", "", "", "", "", "", "",
+	/*F0 - F7*/	"PLTRST_N", "", "PWR_DEBUG_N", "", "", "", "", "",
+	/*G0 - G7*/	"", "", "", "", "", "", "", "",
+	/*H0 - H7*/	"", "", "", "", "", "", "", "",
+	/*I0 - I7*/	"", "", "", "", "", "", "", "",
+	/*J0 - J7*/	"", "", "", "", "", "", "", "",
+	/*K0 - K7*/	"", "", "", "", "", "", "", "",
+	/*L0 - L7*/	"", "", "", "", "PREQ_N", "TCK_MUX_SEL", "", "",
+	/*M0 - M7*/	"", "", "", "PWRGD_SYS_PWROK", "", "PRDY_N", "", "",
+	/*N0 - N7*/	"", "", "", "", "", "", "", "",
+	/*O0 - O7*/	"", "", "", "", "", "", "", "",
+	/*P0 - P7*/	"SYS_BMC_PWRBTN_R_N", "SYS_PWRBTN_N", "FM_MB_RST_BTN", "RST_BMC_RSTBTN_OUT_N", "", "", "", "",
+	/*Q0 - Q7*/	"", "", "", "", "", "", "", "",
+	/*R0 - R7*/	"", "", "", "", "", "", "", "",
+	/*S0 - S7*/	"", "", "", "FP_ID_BTN_SCM_N", "", "", "", "",
+	/*T0 - T7*/	"", "", "", "", "", "", "", "",
+	/*U0 - U7*/	"", "", "", "", "", "", "", "",
+	/*V0 - V7*/	"", "", "", "", "", "SMI", "", "",
+	/*W0 - W7*/	"", "", "", "", "", "", "", "",
+	/*X0 - X7*/	"", "", "", "", "", "", "", "",
+	/*Y0 - Y7*/	"", "", "", "", "", "", "", "",
+	/*Z0 - Z7*/	"FM_BMC_READY_N", "", "", "", "", "", "", "",
+	/*AA0 - AA7*/	"", "", "", "", "", "", "", "",
+	/*AB0 - AB7*/	"", "", "", "", "", "", "", "",
+	/*AC0 - AC7*/	"", "", "", "", "", "", "", "";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <48000>;
+	gpio-line-names =
+	/* SGPIO input lines */
+	/*IOA0-IOA7*/	"","", "SIO_POWER_GOOD","OA1", "XDP_PRST_N","", "","", "FM_SLPS3_PLD_N","", "FM_SLPS4_PLD_N","", "FM_BIOS_POST_CMPLT_BMC_N","", "FM_ADR_TRIGGER_N","OA7",
+	/*IOB0-IOB7*/	"FM_ADR_COMPLETE","", "FM_PMBUS_ALERT_B_EN","", "PSU0_PRESENT_N","", "PSU1_PRESENT_N","", "PSU0_VIN_BUF_GOOD","", "PSU01_VIN_BUF_GOOD","", "PWRGD_PS0_PWROK_R","", "PWRGD_PS1_PWROK_R","",
+	/*IOC0-IOC7*/	"PWRGD_PS_PWROK_PLD_R","", "CHASSIS_INTRUSION","", "BMC_MFG_MODE","", "FM_BMC_EN_DET_R","", "FM_ME_BT_DONE","", "CPU1_PRESENCE","", "CPU2_PRESENCE","", "IRQ_PSYS_CRIT_N","",
+	/*IOD0-IOD7*/	"","", "CPU1_THERMTRIP","", "CPU2_THERMTRIP","", "CPU1_MEM_THERM_EVENT","", "CPU2_MEM_THERM_EVENT","", "CPU1_VRHOT","", "CPU2_VRHOT","", "","",
+	/*IOE0-IOE7*/	"","", "CPU1_MEM_VRHOT","", "CPU2_MEM_VRHOT","", "","", "PCH_BMC_THERMTRIP","", "","", "","", "","",
+	/*IOF0-IOF7*/	"CPU_ERR0","", "CPU_ERR1","", "CPU_ERR2","", "","", "","", "CPU_CATERR","", "","", "","",
+	/*IOG0-IOG7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOH0-IOH7*/	"","", "FP_ID_BTN_R1_N","", "FP_RST_BTN_N","", "","", "","", "FP_PWR_BTN_PLD_N_R","", "","", "","",
+	/*IOI0-IOI7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOJ0-IOJ7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOK0-IOK7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOL0-IOL7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOM0-IOM7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*ION0-ION7*/	"","BMC_SW_HEARTBEAT_N_R", "","FP_LED_FAULT_N", "","FP_ID_LED_N", "","FM_BMC_RSTBTN_OUT_N", "","FM_THERMTRIP_DLY_LVC1_R_N", "","", "","RST_PCA9548_SENSOR_PLD_N", "","USB_OC1_REAR_N",
+	/*IOO0-IOO7*/	"","IRQ_TPM_SPI_N", "","", "","IRQ_PCH_SCI_WHEA_R_N", "","IRQ_BMC_PCH_NMI_R", "","H_CPU_NMI_LVC1_R_N", "","", "","", "","FM_JTAG_BMC_PLD_MUX_SEL",
+	/*IOP0-IOP7*/	"IP0","OP0", "","", "","", "","", "","", "","", "","", "IP7","OP7";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rmii";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
+		&pinctrl_spi2cs2_default>;
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi2:0";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA0>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	U34_PWR_ADC@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	U35_PWR_ADC@4b {
+		compatible = "ti,ads7830";
+		reg = <0x4b>;
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_HOST_DB2000_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U12_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_HOST_DB800_B_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_HOST_DB800_C_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-switch@59 {
+		compatible = "nxp,pca9848";
+		reg = <0x59>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_M2_P0_1V8AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_M2_P1_1V8AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_CPU_PIROM_3V3AUX_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_TEMP_3V3AUX_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			U163_tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			U114_tmp75@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SSDSB_SCL: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			U4_tmp75@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+			U73_tmp75@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SCL: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			U190_fru@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+				pagesize = <32>;
+			};
+		};
+
+		SMB_FB_SCL: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				SMB_IOEXP_SCL: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				SMB_PROGRAM_SCL: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				SMB_FB_SCL_CH2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				SMB_FAN_SENSE_SCL: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					Current_Meter_U2@45 {
+						compatible = "ti,ina219";
+						reg = <0x45>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					Current_Meter_U3@44 {
+						compatible = "ti,ina219";
+						reg = <0x44>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					TEMP_sensor_U2@4b {
+						compatible = "ti,tmp75";
+						reg = <0x4b>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* MB FRU (U173) @ 0xA2 */
+	mb_fru: mb_fru@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	/* FP_U1 Inlet */
+	FP_U1_tmp75@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+
+	FP_U4_fru@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		U197_PCA9546_CH0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U197_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			cpu0_pvccin@60 {
+				compatible = "isil,raa229004";
+				reg = <0x60>;
+			};
+
+			cpu0_pvccinfaon@61 {
+				compatible = "isil,isl69260";
+				reg = <0x61>;
+			};
+
+			cpu0_pvccd_hv@63 {
+				compatible = "isil,isl69260";
+				reg = <0x63>;
+			};
+		};
+
+		U197_PCA9546_CH2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			cpu1_pvccin@72 {
+				compatible = "isil,raa229004";
+				reg = <0x72>;
+			};
+
+			cpu1_pvccinfaon@74 {
+				compatible = "isil,isl69260";
+				reg = <0x74>;
+			};
+
+			cpu1_pvccd_hv@76 {
+				compatible = "isil,isl69260";
+				reg = <0x76>;
+			};
+		};
+
+		U197_PCA9546_CH3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-switch@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		SMB_OCP_SFF_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_OCP_LFF_3V3AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+
+	/* SCM FRU (U19) @ 0xA2 */
+	scm_fru: scm_fru@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	scm_tmp75_u4@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts
new file mode 100644
index 0000000000000..50f3c6a5c0c8d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Super Micro Computer, Inc
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "X11SPI BMC";
+	compatible = "supermicro,x11spi-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@7f000000 {
+			no-map;
+			reg = <0x7f000000 0x01000000>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+};
+
+&gpio {
+    status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+    status = "okay";
+
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_rmii1_default>;
+    clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+           <&syscon ASPEED_CLK_MAC1RCLK>;
+    clock-names = "MACCLK", "RCLK";
+    use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts
new file mode 100644
index 0000000000000..aff27c1d4b06d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Tyan S7106 BMC";
+	compatible = "tyan,s7106-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		p2a_memory: region@987f0000 {
+			no-map;
+			reg = <0x987f0000 0x00010000>; /* 64KB */
+		};
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>; /* 16M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		label = "bmc";
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* RS-232 connector on header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* Alternative to vuart to internally connect (route) to uart1
+	 * when vuart cannot be used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart4 {
+	/* Alternative to vuart to internally connect (route) to the
+	 * external port usually used by uart1 when vuart cannot be
+	 * used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart5 {
+	/* BMC "debug" (console) UART; connected to RS-232 connector
+	 * on header; selectable via jumpers as alternative to uart2
+	 */
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default>;
+
+	/* CPU fan #0 */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* CPU fan #1 */
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	/* PWM group for chassis fans #1, #2, #3 and #4  */
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	/* PWM group for chassis fans #5 and #6  */
+	fan@6 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* Hardware monitor with temperature sensors */
+	nct7802@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			sensor-type = "temperature";
+		};
+	};
+
+	/* Also connected to:
+	 * - IPMB pin header
+	 * - CPU #0 memory error LED @ 0x3A
+	 * - CPU #1 memory error LED @ 0x3C
+	 */
+};
+
+&i2c1 {
+	/* Directly connected to PCH SMBUS #0 */
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* BMC EEPROM, incl. mainboard FRU */
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	/* Also connected to:
+	 * - fan header
+	 * - mini-SAS HD connector
+	 * - SSATA SGPIO
+	 * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low)
+	 *   to PCH SMBUS #3
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* PSU1 FRU @ 0xA0 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* PSU2 FRU @ 0xA2 */
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* PSU1 @ 0xB0 */
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	/* PSU2 @ 0xB2 */
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+
+	/* Also connected to:
+	 * - PCH SMBUS #1
+	 */
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #2
+	 */
+
+	/* Connected via switch to:
+	 * - CPU #0 channels ABC VDDQ @ 0x80
+	 * - CPU #0 channels DEF VDDQ @ 0x81
+	 * - CPU #1 channels ABC VDDQ @ 0x82
+	 * - CPU #1 channels DEF VDDQ @ 0x83
+	 * - CPU #0 VCCIO & VMCP @ 0x52
+	 * - CPU #1 VCCIO & VMCP @ 0x53
+	 * - CPU #0 VCCIN @ 0xC0
+	 * - CPU #0 VSA @ 0xC2
+	 * - CPU #1 VCCIN @ 0xC4
+	 * - CPU #1 VSA @ 0xC6
+	 * - J110
+	 */
+};
+
+&i2c5 {
+	status = "okay";
+
+	/* Connected via switch (PCH_BMC_SMB_SW_P) to:
+	 * - mainboard FRU @ 0xAE
+	 * - XDP connector
+	 * - ME debug header
+	 * - clock buffer @ 0xD8
+	 * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH)
+	 * - PCH SMBUS
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+
+	/* Connected via switch (BMC_PE_SMB_EN_1_N) to
+	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+	 * - 0,0: PCIE slot 1, SMB #1
+	 * - 0,1: PCIE slot 1, SMB #2
+	 * - 1,0: PCIE slot 2, SMB #1
+	 * - 1,1: PCIE slot 2, SMB #2
+	 */
+
+	/* Connected via switch (BMC_PE_SMB_EN_2_N) to
+	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+	 * - 0,0: OCP0 (A) SMB
+	 * - 0,1: OCP0 (C) SMB
+	 * - 1,0: OCP1 (A) SMB
+	 * - 1,1: NC
+	 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #4
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* Not connected */
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+/* We're following the GPIO naming as defined at
+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
+ *
+ * Notes on led-identify and id-button:
+ * - A physical button is connected to id-button which
+ *   triggers the clock on a D flip-flop. The /Q output of the
+ *   flip-flop drives its D input.
+ * - The flip-flop's Q output drives led-identify which is
+ *   connected to LEDs.
+ * - With that, every button press toggles the LED between on and off.
+ *
+ * Notes on power-, reset- and nmi- button and control:
+ * - The -button signals can be used to monitor physical buttons.
+ * - The -control signals can be used to actuate the specific
+ *   operation.
+ * - In hardware, the -button signals are connected to the -control
+ *   signals through drivers with the -control signals being
+ *   protected through diodes.
+ */
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0*/		"",
+	/*A1*/		"",
+	/*A2*/		"led-identify", /* in/out: BMC_IDLED_ON_N */
+	/*A3*/		"",
+	/*A4*/		"",
+	/*A5*/		"",
+	/*A6*/		"",
+	/*A7*/		"",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0*/		"",
+	/*C1*/		"",
+	/*C2*/		"",
+	/*C3*/		"",
+	/*C4*/		"id-button", /* in/out: BMC_IDBTN_IN_OUT_N */
+	/*C5*/		"post-complete", /* in: FM_BIOS_POST_CMPLT_N */
+	/*C6*/		"",
+	/*C7*/		"",
+	/*D0*/		"",
+	/*D1*/		"",
+	/*D2*/		"power-chassis-good", /* in: SYS_PWROK_BUF */
+	/*D3*/		"platform-reset", /* in: SYS_PLTRST_N */
+	/*D4*/		"",
+	/*D5*/		"",
+	/*D6*/		"",
+	/*D7*/		"",
+	/*E0*/		"power-button", /* in: BMC_PWBTN_IN_N */
+	/*E1*/		"power-chassis-control", /* out: BMC_PWRBTN_OUT_N */
+	/*E2*/		"reset-button", /* in: BMC_RSTBTN_IN_N */
+	/*E3*/		"reset-control", /* out: BMC_RSTBTN_OUT_N */
+	/*E4*/		"nmi-button", /* in: BMC_NMIBTN_IN_N */
+	/*E5*/		"nmi-control", /* out: BMC_NMIBTN_OUT_N */
+	/*E6*/		"",
+	/*E7*/		"led-heartbeat", /* out: BMC_HEARTBRAT_LED_N */
+	/*F0*/		"",
+	/*F1*/		"clear-cmos-control", /* out: BMC_CLR_CMOS_N */
+	/*F2*/		"",
+	/*F3*/		"",
+	/*F4*/		"led-fault", /* out: AST_HW_FAULT_N */
+	/*F5*/		"",
+	/*F6*/		"",
+	/*F7*/		"",
+	/*G0*/		"BMC_PE_SMB_EN_1_N", /* out */
+	/*G1*/		"BMC_PE_SMB_EN_2_N", /* out */
+	/*G2*/		"",
+	/*G3*/		"",
+	/*G4*/		"",
+	/*G5*/		"",
+	/*G6*/		"",
+	/*G7*/		"",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0*/		"",
+	/*Q1*/		"",
+	/*Q2*/		"",
+	/*Q3*/		"",
+	/*Q4*/		"BMC_PE_SMB_SW_BIT0", /* out */
+	/*Q5*/		"BMC_PE_SMB_SW_BIT1", /* out */
+	/*Q6*/		"",
+	/*Q7*/		"",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0*/		"",
+	/*AA1*/		"",
+	/*AA2*/		"",
+	/*AA3*/		"BMC_SMB3_PCH_IE_SML3_EN", /* out */
+	/*AA4*/		"",
+	/*AA5*/		"",
+	/*AA6*/		"",
+	/*AA7*/		"",
+	/*AB0-AB7*/	"","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts
new file mode 100644
index 0000000000000..f6c4549c0ac47
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Tyan S8036 BMC";
+	compatible = "tyan,s8036-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		p2a_memory: region@987f0000 {
+			no-map;
+			reg = <0x987f0000 0x00010000>; /* 64KB */
+		};
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>; /* 16M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		label = "bmc";
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* RS-232 connector on header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* Alternative to vuart to internally connect (route) to uart1
+	 * when vuart cannot be used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart4 {
+	/* Alternative to vuart to internally connect (route) to the
+	 * external port usually used by uart1 when vuart cannot be
+	 * used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart5 {
+	/* BMC "debug" (console) UART; connected to RS-232 connector
+	 * on header; selectable via jumpers as alternative to uart2
+	 */
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default>;
+
+	/* CPU fan */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* PWM group for chassis fans #1, #2, #3 and #4 */
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	/* PWM group for chassis fans #5 and #6  */
+	fan@6 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c0 {
+	/* Directly connected to Sideband-Temperature Sensor Interface (APML) */
+	status = "okay";
+};
+
+&i2c1 {
+	/* Directly connected to IPMB HDR. */
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* BMC EEPROM, incl. mainboard FRU */
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+	/* Also connected to:
+	 * - BCM5720
+	 * - FPGA
+	 * - FAN HDR
+	 * - FPIO HDR
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* PSU1 FRU @ 0xA0 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* PSU2 FRU @ 0xA2 */
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* PSU1 @ 0xB0 */
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	/* PSU2 @ 0xB2 */
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	/* Hardware monitor with temperature sensors */
+	nct7802@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+			status = "okay";
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			status = "okay";
+			sensor-type = "temperature";
+		};
+	};
+
+	/* Also connected to:
+	 * - PCA9544
+	 * - CLK BUFF
+	 * - OCP FRU
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+	/* Connected to:
+	 * - PCA9548 @0xE0
+	 * - PCA9548 @0xE2
+	 * - PCA9544 @0xE4
+	 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #4
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* Not connected */
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+/* We're following the GPIO naming as defined at
+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
+ *
+ * Notes on led-identify and id-button:
+ * - A physical button is connected to id-button which
+ *   triggers the clock on a D flip-flop. The /Q output of the
+ *   flip-flop drives its D input.
+ * - The flip-flop's Q output drives led-identify which is
+ *   connected to LEDs.
+ * - With that, every button press toggles the LED between on and off.
+ *
+ * Notes on power-, reset- and nmi- button and control:
+ * - The -button signals can be used to monitor physical buttons.
+ * - The -control signals can be used to actuate the specific
+ *   operation.
+ * - In hardware, the -button signals are connected to the -control
+ *   signals through drivers with the -control signals being
+ *   protected through diodes.
+ */
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0*/		"",
+	/*A1*/		"",
+	/*A2*/		"led-identify", /* in/out: BMC_CHASSIS_ID_LED_L */
+	/*A3*/		"",
+	/*A4*/		"",
+	/*A5*/		"",
+	/*A6*/		"",
+	/*A7*/		"",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0*/		"",
+	/*D1*/		"",
+	/*D2*/		"power-chassis-good", /* in: PWR_GOOD_LED -- Check if this is Z3?*/
+	/*D3*/		"platform-reset", /* in: RESET_LED_L */
+	/*D4*/		"",
+	/*D5*/		"",
+	/*D6*/		"",
+	/*D7*/		"",
+	/*E0*/		"power-button", /* in: BMC_SYS_MON_PWR_BTN_L */
+	/*E1*/		"power-chassis-control", /* out: BMC_ASSERT_PWR_BTN */
+	/*E2*/		"reset-button", /* in: BMC_SYS_MOS_RST_BTN_L*/
+	/*E3*/		"reset-control", /* out: BMC_ASSERT_RST_BTN */
+	/*E4*/		"nmi-button", /* in: BMC_SYS_MON_NMI_BTN_L */
+	/*E5*/		"nmi-control", /* out: BMC_ASSERT_NMI_BTN */
+	/*E6*/		"TSI_RESERT",
+	/*E7*/		"led-heartbeat", /* out: BMC_GPIOE7 */
+	/*F0*/		"",
+	/*F1*/		"clear-cmos-control", /* out: BMC_ASSERT_CLR_CMOS_L */
+	/*F2*/		"",
+	/*F3*/		"",
+	/*F4*/		"led-fault", /* out: BMC_HWM_FAULT_LED_L */
+	/*F5*/		"BMC_SYS_FAULT_LED_L",
+	/*F6*/		"BMC_ASSERT_BIOS_WP_L",
+	/*F7*/		"",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0*/		"",
+	/*Q1*/		"",
+	/*Q2*/		"",
+	/*Q3*/		"",
+	/*Q4*/		"",
+	/*Q5*/		"",
+	/*Q6*/		"id-button", /* in: BMC_CHASSIS_ID_BTN_L */
+	/*Q7*/		"",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z2*/	"","","",
+	/*Z3*/		"post-complete", /* BMC_SYS_MON_PWROK */
+	/*Z4-Z7*/	"","","","",
+	/*AA0*/		"",
+	/*AA1*/		"",
+	/*AA2*/		"",
+	/*AA3*/		"",
+	/*AA4*/		"",
+	/*AA5*/		"",
+	/*AA6*/		"",
+	/*AA7*/		"BMC_ASSERT_BMC_READY",
+	/*AB0*/		"BMC_SPD_SEL",
+	/*AB1-AB7*/	"","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
new file mode 100644
index 0000000000000..7ab29129d1e4e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2022 Ufispace Co., Ltd.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ufispace NCPLite BMC";
+	compatible = "ufispace,ncplite-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		fan-status-int-l {
+			label = "fan-status-int-l";
+			gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(M, 2)>;
+		};
+
+		allpwr-good {
+			label = "allpwr-good";
+			gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(V, 4)>;
+		};
+
+		psu0-alert-n {
+			label = "psu0-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 1)>;
+		};
+
+		psu1-alert-n {
+			label = "psu1-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 2)>;
+		};
+
+		int-thermal-alert {
+			label = "int-thermal-alert";
+			gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 2)>;
+		};
+
+		cpu-caterr-l {
+			label = "cpu-caterr-l";
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 3)>;
+		};
+
+		cpu-thermtrip-l {
+			label = "cpu-thermtrip-l";
+			gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 5)>;
+		};
+
+		psu0-presence-l {
+			label = "psu0-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		psu1-presence-l {
+			label = "psu1-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+
+		psu0-power-ok {
+			label = "psu0-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 4)>;
+		};
+
+		psu1-power-ok {
+			label = "psu1-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+	};
+};
+
+&mac2 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_reset {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&udc {
+	status = "okay";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	lm75@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	lm86@4c {
+		compatible = "national,lm86";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	lm75@4f {
+		cpmpatible = "national,lm75";
+		reg = <0x4f>;
+	};
+
+	fan_ioexp: pca9535@20 {
+		compatible = "nxp,pca9535";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"","","presence-fan0","",
+		"","","presence-fan1","",
+		"","","presence-fan2","",
+		"","","presence-fan3","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"CPU_PWRGD","","","power-button","host0-ready","","presence-ps0","presence-ps1",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","reset-button","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"power-chassis-control0","power-chassis-control1","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","power-chassis-good","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts
new file mode 100644
index 0000000000000..24319267d5508
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN N110 BMC";
+	compatible = "yadro,vegman-n110-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","PCIE_NIC_ALERT","","","SKT0_FAULT_LED","","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "", "", "", "", "PE_PCH_SCR_CLKREQ", "",
+		/*IO1.0-1.7*/	"", "PE_PCH_MEZ_PRSNT", "PE_PCH_MEZ_PRSNT_", "NIC_4_PE_PRSNT", "NIC_3_PE_PRSNT", "NIC_2_PE_PRSNT", "NIC_1_PE_PRSNT", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "", "", "",
+		/*IO3.0-3.7*/	"", "", "", "", "", "", "", "",
+		/*IO4.0-4.7*/	"", "", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	mux-expa@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	mux-sata@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	mux-expb@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x06>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
new file mode 100644
index 0000000000000..ebbb68b55559a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Rx20 BMC";
+	compatible = "yadro,vegman-rx20-bmc", "aspeed,ast2500";
+
+	leds {
+		compatible = "gpio-leds";
+
+		temp_alarm {
+			label = "temp:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		temp_ok {
+			label = "temp:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_fault {
+			label = "psu:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_ok {
+			label = "psu:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CASE_OPEN_DNP","CASE_OPEN_FAULT_RST_DNP","BEZEL_ON_PWR_P3V3","PWM_PWRGD_EXP_EN","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","LED_TEMP_STATUS_R","LED_TEMP_STATUS_G","LED_PWR_STATUS_R","LED_PWR_STATUS_G",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED_DNP","SKT1_FAULT_LED_DNP","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","SPI_BMC_BOOT_HD","IRQ_NMI_EVENT","SPI_BMC_BOOT_WP","SPI_BMC_BOOT_WP1","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"SEL_FLASH_SOFT","STATUS_SEL_BMC","","","BMC_WDT_P","ID_BUTTON","PS_PWROK","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","SPI_BIOS_ACTIVE_FLASH_SEL","STATUS_SEL_BIOS",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_BMC_BOOT_CS1","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","RSR_A_SMBEXP_RST_INT","RSR_B_SMBEXP_RST_INT","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","BMC_WDT_RST1","BMC_WDT_RST2","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"ETH3_CLK_REQ", "ETH2_CLK_REQ", "RSR_A_PCIE_X16_2_PRSNT", "RSR_B_PCIE_X16_2_PRSNT", "", "RSR_B_PCIE_X8_3_PRSNT", "RSR_B_PCIE_X8_4_PRSNT", "RSR_B_PCIE_X16_PRSNT_N",
+		/*IO1.0-1.7*/	"RSR_B_PCIE_X8_2_PRSNT", "RSR_B_PCIE_X8_1_PRSNT", "NIC_1_PE_BUF_PRSNT", "RSR_A_PCIE_X16_PRSNT", "RSR_A_PCIE_X8_3_PRSNT", "RSR_A_PCIE_X8_2_PRSNT", "RSR_A_PCIE_X8_1_PRSNT_N", "";
+	};
+	gpio@23 {
+		compatible = "nxp,pcal9535";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "", "", "",
+		/*IO1.0-1.7*/	"", "", "", "", "", "", "", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PCH_PWR_RESET_N", "FM_BOARD_SKU_ID0", "FM_BOARD_SKU_ID1", "FM_BOARD_SKU_ID2", "FM_BOARD_SKU_ID3", "FM_BOARD_SKU_ID4", "FM_BOARD_REV_ID0", "FM_BOARD_REV_ID1";
+	};
+	gpio@39 {
+		compatible = "nxp,pca9554";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FAN_FAULT_0", "FAN_FAULT_1", "FAN_FAULT_2", "FAN_FAULT_3", "FAN_FAULT_4", "FAN_FAULT_5", "FAN_FAULT_6", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	mux-expa@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			rsra-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					at24@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+		};
+	};
+	mux-sata@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	mux-expb@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			rsrb-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					at24@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+			at24@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+				size = <8192>;
+				address-width = <16>;
+			};
+		};
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x07>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0C>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0D>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts
new file mode 100644
index 0000000000000..e36ee4704994b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Sx20 BMC";
+	compatible = "yadro,vegman-sx20-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED","SKT1_FAULT_LED","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","BMC_GPU_RISER_ID1","BMC_GPU_RISER_ID0","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","P12V_HDDS_A_EN","P12V_HDDS_B_EN","P5V_HDDS_A_EN","PWRGD_P5V_HDDS_A","P5V_HDDS_B_EN","PWRGD_P5V_HDDS_B","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "CPU1_PE3_0_SLOT_PRSNT", "", "CPU1_PE1_GPU_PRSNT", "CPU1_PE3_1_SLOT_PRSNT", "PE_PCH_MEZ_PRSNT", "CPU0_PE3_1_SLOT_PRSNT",
+		/*IO1.0-1.7*/	"CPU0_PE1_GPU_PRSNT", "CPU0_PE2_NVME2_PRSNT", "CPU1_PE2_NVME3_PRSNT", "CPU1_PE2_SLOT_PRSNT", "CPU1_PE2_NVME4_PRSNT", "", "CPU0_PE2_NVME1_PRSNT", "CPU0_PE3_0_RAID_PRSNT";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PWRGD_P5V_HDDS_A_R", "PWRGD_P5V_HDDS_B_R", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	mux-expa@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	mux-sata@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	mux-expb@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
new file mode 100644
index 0000000000000..1a5b25b2ea295
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		ramoops@9eff0000{
+			compatible = "ramoops";
+			reg = <0x9eff0000 0x10000>;
+			record-size = <0x2000>;
+			console-size = <0x2000>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			label = "platform:blue:indicator";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		status_amber {
+			label = "platform:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		status_green {
+			label = "platform:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_fault {
+			label = "platform:red:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_ok {
+			label = "platform:green:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&timer 5 1000000 0>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		m25p,fast-read;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			/* KSZ9131 */
+			compatible = "ethernet-phy-id0022.1640";
+			reg = <1>;
+
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	disable-wp;
+};
+
+&timer {
+	fttmr010,pwm-outputs = <5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_timer5_default>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xCA2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xCA4>;
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&i2c0 {
+	/* SMB_IPMB_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c1 {
+	/* SMB_CHASSENSOR_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c3 {
+	/* SMB_HOST_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c4 {
+	/* BMC_PMBUS2_STBY */
+	status = "okay";
+};
+
+&i2c5 {
+	/* SMB_SMLINK0_STBY_LVC3 */
+	bus-frequency = <1000000>;
+	multi-master;
+	status = "okay";
+};
+
+&i2c6 {
+	/* SMB_TEMPSENSOR_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c7 {
+	/* SMB_SM_PMB1_SML1_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c9 {
+	/* SMB_BMC_ETH3_LVC3 */
+	status = "okay";
+};
+
+&i2c10 {
+	/* SMB_BMC_ETH2_LVC3 */
+	status = "okay";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	status = "okay";
+
+	at24@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		size = <8192>;
+		address-width = <16>;
+	};
+};
+
+&i2c12 {
+	/* SMB_BMC_FAULT_EXP_LVC3 */
+	status = "okay";
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
new file mode 100644
index 0000000000000..530491ae5eb26
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -0,0 +1,1453 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dt-bindings/clock/aspeed-clock.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2400";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fmc: spi@1e620000 {
+			reg = <0x1e620000 0x94>, <0x20000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2400-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <19>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@3 {
+				reg = < 3 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@4 {
+				reg = < 4 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+		};
+
+		spi: spi@1e630000 {
+			reg = <0x1e630000 0x18>, <0x30000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2400-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		vic: interrupt-controller@1e6c0080 {
+			compatible = "aspeed,ast2400-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-sources = <0xffffffff 0x0007ffff>;
+			reg = <0x1e6c0080 0x80>;
+		};
+
+		cvic: copro-interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2400-cvic", "aspeed-cvic";
+			valid-sources = <0x7fffffff>;
+			reg = <0x1e6c2000 0x80>;
+		};
+
+		mac0: ethernet@1e660000 {
+			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			interrupts = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@1e680000 {
+			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			interrupts = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2400-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2h_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2400-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <14>;
+			#ports = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an explicit pinmux
+			 * override if you don't enable EHCI
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2400-usb-vhub";
+			reg = <0x1e6a0000 0x300>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <5>;
+			aspeed,vhub-generic-endpoints = <15>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2d_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1a8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				p2a: p2a-control@2c {
+					reg = <0x2c 0x4>;
+					compatible = "aspeed,ast2400-p2a-ctrl";
+					status = "disabled";
+				};
+
+				silicon-id@7c {
+					compatible = "aspeed,ast2400-silicon-id", "aspeed,silicon-id";
+					reg = <0x7c 0x4>;
+				};
+
+				pinctrl: pinctrl@80 {
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					compatible = "aspeed,ast2400-pinctrl";
+				};
+			};
+
+			rng: hwrng@1e6e2078 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2078 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			adc: adc@1e6e9000 {
+				compatible = "aspeed,ast2400-adc";
+				reg = <0x1e6e9000 0xb0>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sram: sram@1e720000 {
+				compatible = "mmio-sram";
+				reg = <0x1e720000 0x8000>;	// 32K
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2400-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <7>;
+				status = "disabled";
+			};
+
+			sdmmc: sd-controller@1e740000 {
+				compatible = "aspeed,ast2400-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@100 {
+					compatible = "aspeed,ast2400-sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@200 {
+					compatible = "aspeed,ast2400-sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			gpio: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2400-gpio";
+				reg = <0x1e780000 0x1000>;
+				interrupts = <20>;
+				gpio-ranges = <&pinctrl 0 0 220>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			timer: timer@1e782000 {
+				/* This timer is a Faraday FTTMR010 derivative */
+				compatible = "aspeed,ast2400-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts = <16 17 18 35 36 37 38 39>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				clock-names = "PCLK";
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2400-rtc";
+				reg = <0x1e781000 0x18>;
+				status = "disabled";
+			};
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x20>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2400-wdt";
+				reg = <0x1e785000 0x1c>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt2: watchdog@1e785020 {
+				compatible = "aspeed,ast2400-wdt";
+				reg = <0x1e785020 0x1c>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			pwm_tacho: pwm-tacho-controller@1e786000 {
+				compatible = "aspeed,ast2400-pwm-tacho";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1e786000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_24M>;
+				resets = <&syscon ASPEED_RESET_PWM>;
+				status = "disabled";
+			};
+
+			vuart: serial@1e787000 {
+				compatible = "aspeed,ast2400-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
+				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2400-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2400-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2400-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2400-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2400-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				uart_routing: uart-routing@9c {
+					compatible = "aspeed,ast2400-uart-routing";
+					reg = <0x9c 0x4>;
+					status = "disabled";
+				};
+			};
+
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2400-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				interrupts = <32>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				interrupts = <33>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				interrupts = <34>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+		};
+	};
+};
+
+&i2c {
+	i2c_ic: interrupt-controller@0 {
+		#interrupt-cells = <1>;
+		compatible = "aspeed,ast2400-i2c-ic";
+		reg = <0x0 0x40>;
+		interrupts = <12>;
+		interrupt-controller;
+	};
+
+	i2c0: i2c-bus@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <0>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c1: i2c-bus@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x80 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <1>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c2: i2c-bus@c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0xc0 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <2>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c-bus@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x100 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <3>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c-bus@140 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x140 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <4>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c-bus@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x180 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <5>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c-bus@1c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x1c0 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <6>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c-bus@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x300 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <7>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c-bus@340 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x340 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <8>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c-bus@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x380 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <9>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c-bus@3c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x3c0 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <10>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c-bus@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x400 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <11>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c-bus@440 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x440 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <12>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c-bus@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x480 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <13>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+};
+
+&pinctrl {
+	pinctrl_acpi_default: acpi_default {
+		function = "ACPI";
+		groups = "ACPI";
+	};
+
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_ddcclk_default: ddcclk_default {
+		function = "DDCCLK";
+		groups = "DDCCLK";
+	};
+
+	pinctrl_ddcdat_default: ddcdat_default {
+		function = "DDCDAT";
+		groups = "DDCDAT";
+	};
+
+	pinctrl_extrst_default: extrst_default {
+		function = "EXTRST";
+		groups = "EXTRST";
+	};
+
+	pinctrl_flack_default: flack_default {
+		function = "FLACK";
+		groups = "FLACK";
+	};
+
+	pinctrl_flbusy_default: flbusy_default {
+		function = "FLBUSY";
+		groups = "FLBUSY";
+	};
+
+	pinctrl_flwp_default: flwp_default {
+		function = "FLWP";
+		groups = "FLWP";
+	};
+
+	pinctrl_gpid_default: gpid_default {
+		function = "GPID";
+		groups = "GPID";
+	};
+
+	pinctrl_gpid0_default: gpid0_default {
+		function = "GPID0";
+		groups = "GPID0";
+	};
+
+	pinctrl_gpid2_default: gpid2_default {
+		function = "GPID2";
+		groups = "GPID2";
+	};
+
+	pinctrl_gpid4_default: gpid4_default {
+		function = "GPID4";
+		groups = "GPID4";
+	};
+
+	pinctrl_gpid6_default: gpid6_default {
+		function = "GPID6";
+		groups = "GPID6";
+	};
+
+	pinctrl_gpie0_default: gpie0_default {
+		function = "GPIE0";
+		groups = "GPIE0";
+	};
+
+	pinctrl_gpie2_default: gpie2_default {
+		function = "GPIE2";
+		groups = "GPIE2";
+	};
+
+	pinctrl_gpie4_default: gpie4_default {
+		function = "GPIE4";
+		groups = "GPIE4";
+	};
+
+	pinctrl_gpie6_default: gpie6_default {
+		function = "GPIE6";
+		groups = "GPIE6";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcrst_default: lpcrst_default {
+		function = "LPCRST";
+		groups = "LPCRST";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_mac1link_default: mac1link_default {
+		function = "MAC1LINK";
+		groups = "MAC1LINK";
+	};
+
+	pinctrl_mac2link_default: mac2link_default {
+		function = "MAC2LINK";
+		groups = "MAC2LINK";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_ndts4_default: ndts4_default {
+		function = "NDTS4";
+		groups = "NDTS4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rom16_default: rom16_default {
+		function = "ROM16";
+		groups = "ROM16";
+	};
+
+	pinctrl_rom8_default: rom8_default {
+		function = "ROM8";
+		groups = "ROM8";
+	};
+
+	pinctrl_romcs1_default: romcs1_default {
+		function = "ROMCS1";
+		groups = "ROMCS1";
+	};
+
+	pinctrl_romcs2_default: romcs2_default {
+		function = "ROMCS2";
+		groups = "ROMCS2";
+	};
+
+	pinctrl_romcs3_default: romcs3_default {
+		function = "ROMCS3";
+		groups = "ROMCS3";
+	};
+
+	pinctrl_romcs4_default: romcs4_default {
+		function = "ROMCS4";
+		groups = "ROMCS4";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_sgpmck_default: sgpmck_default {
+		function = "SGPMCK";
+		groups = "SGPMCK";
+	};
+
+	pinctrl_sgpmi_default: sgpmi_default {
+		function = "SGPMI";
+		groups = "SGPMI";
+	};
+
+	pinctrl_sgpmld_default: sgpmld_default {
+		function = "SGPMLD";
+		groups = "SGPMLD";
+	};
+
+	pinctrl_sgpmo_default: sgpmo_default {
+		function = "SGPMO";
+		groups = "SGPMO";
+	};
+
+	pinctrl_sgpsck_default: sgpsck_default {
+		function = "SGPSCK";
+		groups = "SGPSCK";
+	};
+
+	pinctrl_sgpsi0_default: sgpsi0_default {
+		function = "SGPSI0";
+		groups = "SGPSI0";
+	};
+
+	pinctrl_sgpsi1_default: sgpsi1_default {
+		function = "SGPSI1";
+		groups = "SGPSI1";
+	};
+
+	pinctrl_sgpsld_default: sgpsld_default {
+		function = "SGPSLD";
+		groups = "SGPSLD";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1debug_default: spi1debug_default {
+		function = "SPI1DEBUG";
+		groups = "SPI1DEBUG";
+	};
+
+	pinctrl_spi1passthru_default: spi1passthru_default {
+		function = "SPI1PASSTHRU";
+		groups = "SPI1PASSTHRU";
+	};
+
+	pinctrl_spics1_default: spics1_default {
+		function = "SPICS1";
+		groups = "SPICS1";
+	};
+
+	pinctrl_timer3_default: timer3_default {
+		function = "TIMER3";
+		groups = "TIMER3";
+	};
+
+	pinctrl_timer4_default: timer4_default {
+		function = "TIMER4";
+		groups = "TIMER4";
+	};
+
+	pinctrl_timer5_default: timer5_default {
+		function = "TIMER5";
+		groups = "TIMER5";
+	};
+
+	pinctrl_timer6_default: timer6_default {
+		function = "TIMER6";
+		groups = "TIMER6";
+	};
+
+	pinctrl_timer7_default: timer7_default {
+		function = "TIMER7";
+		groups = "TIMER7";
+	};
+
+	pinctrl_timer8_default: timer8_default {
+		function = "TIMER8";
+		groups = "TIMER8";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_usbcki_default: usbcki_default {
+		function = "USBCKI";
+		groups = "USBCKI";
+	};
+
+	pinctrl_usb2h_default: usb2h_default {
+		function = "USB2H1";
+		groups = "USB2H1";
+	};
+
+	pinctrl_usb2d_default: usb2d_default {
+		function = "USB2D1";
+		groups = "USB2D1";
+	};
+
+	pinctrl_vgabios_rom_default: vgabios_rom_default {
+		function = "VGABIOS_ROM";
+		groups = "VGABIOS_ROM";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_vpi18_default: vpi18_default {
+		function = "VPI18";
+		groups = "VPI18";
+	};
+
+	pinctrl_vpi24_default: vpi24_default {
+		function = "VPI24";
+		groups = "VPI24";
+	};
+
+	pinctrl_vpi30_default: vpi30_default {
+		function = "VPI30";
+		groups = "VPI30";
+	};
+
+	pinctrl_vpo12_default: vpo12_default {
+		function = "VPO12";
+		groups = "VPO12";
+	};
+
+	pinctrl_vpo24_default: vpo24_default {
+		function = "VPO24";
+		groups = "VPO24";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
new file mode 100644
index 0000000000000..04f98d1dbb97c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -0,0 +1,1661 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dt-bindings/clock/aspeed-clock.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2500";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm1176jzf-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fmc: spi@1e620000 {
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <19>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi1: spi@1e630000 {
+			reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@1e631000 {
+			reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		vic: interrupt-controller@1e6c0080 {
+			compatible = "aspeed,ast2400-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-sources = <0xfefff7ff 0x0807ffff>;
+			reg = <0x1e6c0080 0x80>;
+		};
+
+		cvic: copro-interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
+			valid-sources = <0xffffffff>;
+			copro-sw-interrupts = <1>;
+			reg = <0x1e6c2000 0x80>;
+		};
+
+		mac0: ethernet@1e660000 {
+			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			interrupts = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@1e680000 {
+			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			interrupts = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2500-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,ast2500-ehci", "generic-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <13>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2500-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <14>;
+			#ports = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an explicit pinmux
+			 * override if you don't enable EHCI
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2500-usb-vhub";
+			reg = <0x1e6a0000 0x300>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <5>;
+			aspeed,vhub-generic-endpoints = <15>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ad_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edac: memory-controller@1e6e0000 {
+				compatible = "aspeed,ast2500-sdram-edac";
+				reg = <0x1e6e0000 0x174>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1a8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				scu_ic: interrupt-controller@18 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2500-scu-ic";
+					reg = <0x18 0x4>;
+					interrupts = <21>;
+					interrupt-controller;
+				};
+
+				p2a: p2a-control@2c {
+					compatible = "aspeed,ast2500-p2a-ctrl";
+					reg = <0x2c 0x4>;
+					status = "disabled";
+				};
+
+				silicon-id@7c {
+					compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
+					reg = <0x7c 0x4 0x150 0x8>;
+				};
+
+				pinctrl: pinctrl@80 {
+					compatible = "aspeed,ast2500-pinctrl";
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					aspeed,external-nodes = <&gfx>, <&lhc>;
+				};
+			};
+
+			rng: hwrng@1e6e2078 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2078 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			hace: crypto@1e6e3000 {
+				compatible = "aspeed,ast2500-hace";
+				reg = <0x1e6e3000 0x100>;
+				interrupts = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2500-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				reg-io-width = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_CRT1>;
+				syscon = <&syscon>;
+				status = "disabled";
+				interrupts = <0x19>;
+			};
+
+			xdma: xdma@1e6e7000 {
+				compatible = "aspeed,ast2500-xdma";
+				reg = <0x1e6e7000 0x100>;
+				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+				resets = <&syscon ASPEED_RESET_XDMA>;
+				interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
+				aspeed,pcie-device = "bmc";
+				aspeed,scu = <&syscon>;
+				status = "disabled";
+			};
+
+			adc: adc@1e6e9000 {
+				compatible = "aspeed,ast2500-adc";
+				reg = <0x1e6e9000 0xb0>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2500-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <7>;
+				status = "disabled";
+			};
+
+			sram: sram@1e720000 {
+				compatible = "mmio-sram";
+				reg = <0x1e720000 0x9000>;	// 36K
+			};
+
+			sdmmc: sd-controller@1e740000 {
+				compatible = "aspeed,ast2500-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@100 {
+					compatible = "aspeed,ast2500-sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@200 {
+					compatible = "aspeed,ast2500-sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			gpio: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2500-gpio";
+				reg = <0x1e780000 0x200>;
+				interrupts = <20>;
+				gpio-ranges = <&pinctrl 0 0 232>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sgpio: sgpio@1e780200 {
+				#gpio-cells = <2>;
+				compatible = "aspeed,ast2500-sgpio";
+				gpio-controller;
+				interrupts = <40>;
+				reg = <0x1e780200 0x0100>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm_default>;
+				status = "disabled";
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2500-rtc";
+				reg = <0x1e781000 0x18>;
+				status = "disabled";
+			};
+
+			timer: timer@1e782000 {
+				/* This timer is a Faraday FTTMR010 derivative */
+				compatible = "aspeed,ast2400-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts = <16 17 18 35 36 37 38 39>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				clock-names = "PCLK";
+			};
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x20>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785000 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt2: watchdog@1e785020 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785020 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt3: watchdog@1e785040 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785040 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				status = "disabled";
+			};
+
+			pwm_tacho: pwm-tacho-controller@1e786000 {
+				compatible = "aspeed,ast2500-pwm-tacho";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1e786000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_24M>;
+				resets = <&syscon ASPEED_RESET_PWM>;
+				status = "disabled";
+			};
+
+			vuart: serial@1e787000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
+				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2500-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2500-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2500-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				uart_routing: uart-routing@9c {
+					compatible = "aspeed,ast2500-uart-routing";
+					reg = <0x9c 0x4>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2500-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2500-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+			};
+
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2500-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				interrupts = <32>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				interrupts = <33>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				interrupts = <34>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+		};
+	};
+};
+
+&i2c {
+	i2c_ic: interrupt-controller@0 {
+		#interrupt-cells = <1>;
+		compatible = "aspeed,ast2500-i2c-ic";
+		reg = <0x0 0x40>;
+		interrupts = <12>;
+		interrupt-controller;
+	};
+
+	i2c0: i2c-bus@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <0>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c1: i2c-bus@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x80 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <1>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c2: i2c-bus@c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0xc0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <2>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c-bus@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x100 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <3>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c-bus@140 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x140 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <4>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c-bus@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x180 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <5>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c-bus@1c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x1c0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <6>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c-bus@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x300 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <7>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c-bus@340 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x340 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <8>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c-bus@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x380 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <9>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c-bus@3c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x3c0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <10>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c-bus@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x400 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <11>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c-bus@440 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x440 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <12>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c-bus@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x480 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <13>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+};
+
+&pinctrl {
+	pinctrl_acpi_default: acpi_default {
+		function = "ACPI";
+		groups = "ACPI";
+	};
+
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_ddcclk_default: ddcclk_default {
+		function = "DDCCLK";
+		groups = "DDCCLK";
+	};
+
+	pinctrl_ddcdat_default: ddcdat_default {
+		function = "DDCDAT";
+		groups = "DDCDAT";
+	};
+
+	pinctrl_espi_default: espi_default {
+		function = "ESPI";
+		groups = "ESPI";
+	};
+
+	pinctrl_fwspics1_default: fwspics1_default {
+		function = "FWSPICS1";
+		groups = "FWSPICS1";
+	};
+
+	pinctrl_fwspics2_default: fwspics2_default {
+		function = "FWSPICS2";
+		groups = "FWSPICS2";
+	};
+
+	pinctrl_gpid0_default: gpid0_default {
+		function = "GPID0";
+		groups = "GPID0";
+	};
+
+	pinctrl_gpid2_default: gpid2_default {
+		function = "GPID2";
+		groups = "GPID2";
+	};
+
+	pinctrl_gpid4_default: gpid4_default {
+		function = "GPID4";
+		groups = "GPID4";
+	};
+
+	pinctrl_gpid6_default: gpid6_default {
+		function = "GPID6";
+		groups = "GPID6";
+	};
+
+	pinctrl_gpie0_default: gpie0_default {
+		function = "GPIE0";
+		groups = "GPIE0";
+	};
+
+	pinctrl_gpie2_default: gpie2_default {
+		function = "GPIE2";
+		groups = "GPIE2";
+	};
+
+	pinctrl_gpie4_default: gpie4_default {
+		function = "GPIE4";
+		groups = "GPIE4";
+	};
+
+	pinctrl_gpie6_default: gpie6_default {
+		function = "GPIE6";
+		groups = "GPIE6";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_lad0_default: lad0_default {
+		function = "LAD0";
+		groups = "LAD0";
+	};
+
+	pinctrl_lad1_default: lad1_default {
+		function = "LAD1";
+		groups = "LAD1";
+	};
+
+	pinctrl_lad2_default: lad2_default {
+		function = "LAD2";
+		groups = "LAD2";
+	};
+
+	pinctrl_lad3_default: lad3_default {
+		function = "LAD3";
+		groups = "LAD3";
+	};
+
+	pinctrl_lclk_default: lclk_default {
+		function = "LCLK";
+		groups = "LCLK";
+	};
+
+	pinctrl_lframe_default: lframe_default {
+		function = "LFRAME";
+		groups = "LFRAME";
+	};
+
+	pinctrl_lpchc_default: lpchc_default {
+		function = "LPCHC";
+		groups = "LPCHC";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcplus_default: lpcplus_default {
+		function = "LPCPLUS";
+		groups = "LPCPLUS";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcrst_default: lpcrst_default {
+		function = "LPCRST";
+		groups = "LPCRST";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_lsirq_default: lsirq_default {
+		function = "LSIRQ";
+		groups = "LSIRQ";
+	};
+
+	pinctrl_mac1link_default: mac1link_default {
+		function = "MAC1LINK";
+		groups = "MAC1LINK";
+	};
+
+	pinctrl_mac2link_default: mac2link_default {
+		function = "MAC2LINK";
+		groups = "MAC2LINK";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_nrts4_default: nrts4_default {
+		function = "NRTS4";
+		groups = "NRTS4";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pewake_default: pewake_default {
+		function = "PEWAKE";
+		groups = "PEWAKE";
+	};
+
+	pinctrl_pnor_default: pnor_default {
+		function = "PNOR";
+		groups = "PNOR";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt10_default: salt10_default {
+		function = "SALT10";
+		groups = "SALT10";
+	};
+
+	pinctrl_salt11_default: salt11_default {
+		function = "SALT11";
+		groups = "SALT11";
+	};
+
+	pinctrl_salt12_default: salt12_default {
+		function = "SALT12";
+		groups = "SALT12";
+	};
+
+	pinctrl_salt13_default: salt13_default {
+		function = "SALT13";
+		groups = "SALT13";
+	};
+
+	pinctrl_salt14_default: salt14_default {
+		function = "SALT14";
+		groups = "SALT14";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_salt5_default: salt5_default {
+		function = "SALT5";
+		groups = "SALT5";
+	};
+
+	pinctrl_salt6_default: salt6_default {
+		function = "SALT6";
+		groups = "SALT6";
+	};
+
+	pinctrl_salt7_default: salt7_default {
+		function = "SALT7";
+		groups = "SALT7";
+	};
+
+	pinctrl_salt8_default: salt8_default {
+		function = "SALT8";
+		groups = "SALT8";
+	};
+
+	pinctrl_salt9_default: salt9_default {
+		function = "SALT9";
+		groups = "SALT9";
+	};
+
+	pinctrl_scl1_default: scl1_default {
+		function = "SCL1";
+		groups = "SCL1";
+	};
+
+	pinctrl_scl2_default: scl2_default {
+		function = "SCL2";
+		groups = "SCL2";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_sda1_default: sda1_default {
+		function = "SDA1";
+		groups = "SDA1";
+	};
+
+	pinctrl_sda2_default: sda2_default {
+		function = "SDA2";
+		groups = "SDA2";
+	};
+
+	pinctrl_sgpm_default: sgpm_default {
+		function = "SGPM";
+		groups = "SGPM";
+	};
+
+	pinctrl_sgps1_default: sgps1_default {
+		function = "SGPS1";
+		groups = "SGPS1";
+	};
+
+	pinctrl_sgps2_default: sgps2_default {
+		function = "SGPS2";
+		groups = "SGPS2";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1cs1_default: spi1cs1_default {
+		function = "SPI1CS1";
+		groups = "SPI1CS1";
+	};
+
+	pinctrl_spi1debug_default: spi1debug_default {
+		function = "SPI1DEBUG";
+		groups = "SPI1DEBUG";
+	};
+
+	pinctrl_spi1passthru_default: spi1passthru_default {
+		function = "SPI1PASSTHRU";
+		groups = "SPI1PASSTHRU";
+	};
+
+	pinctrl_spi2ck_default: spi2ck_default {
+		function = "SPI2CK";
+		groups = "SPI2CK";
+	};
+
+	pinctrl_spi2cs0_default: spi2cs0_default {
+		function = "SPI2CS0";
+		groups = "SPI2CS0";
+	};
+
+	pinctrl_spi2cs1_default: spi2cs1_default {
+		function = "SPI2CS1";
+		groups = "SPI2CS1";
+	};
+
+	pinctrl_spi2miso_default: spi2miso_default {
+		function = "SPI2MISO";
+		groups = "SPI2MISO";
+	};
+
+	pinctrl_spi2mosi_default: spi2mosi_default {
+		function = "SPI2MOSI";
+		groups = "SPI2MOSI";
+	};
+
+	pinctrl_timer3_default: timer3_default {
+		function = "TIMER3";
+		groups = "TIMER3";
+	};
+
+	pinctrl_timer4_default: timer4_default {
+		function = "TIMER4";
+		groups = "TIMER4";
+	};
+
+	pinctrl_timer5_default: timer5_default {
+		function = "TIMER5";
+		groups = "TIMER5";
+	};
+
+	pinctrl_timer6_default: timer6_default {
+		function = "TIMER6";
+		groups = "TIMER6";
+	};
+
+	pinctrl_timer7_default: timer7_default {
+		function = "TIMER7";
+		groups = "TIMER7";
+	};
+
+	pinctrl_timer8_default: timer8_default {
+		function = "TIMER8";
+		groups = "TIMER8";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_usbcki_default: usbcki_default {
+		function = "USBCKI";
+		groups = "USBCKI";
+	};
+
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USB2AH";
+	};
+
+	pinctrl_usb2ad_default: usb2ad_default {
+		function = "USB2AD";
+		groups = "USB2AD";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USB11BHID";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USB2BH";
+	};
+
+	pinctrl_vgabiosrom_default: vgabiosrom_default {
+		function = "VGABIOSROM";
+		groups = "VGABIOSROM";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_vpi24_default: vpi24_default {
+		function = "VPI24";
+		groups = "VPI24";
+	};
+
+	pinctrl_vpo_default: vpo_default {
+		function = "VPO";
+		groups = "VPO";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
new file mode 100644
index 0000000000000..7cd4f075e3250
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
@@ -0,0 +1,1184 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+&pinctrl {
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_espi_default: espi_default {
+		function = "ESPI";
+		groups = "ESPI";
+	};
+
+	pinctrl_espialt_default: espialt_default {
+		function = "ESPIALT";
+		groups = "ESPIALT";
+	};
+
+	pinctrl_fsi1_default: fsi1_default {
+		function = "FSI1";
+		groups = "FSI1";
+	};
+
+	pinctrl_fsi2_default: fsi2_default {
+		function = "FSI2";
+		groups = "FSI2";
+	};
+
+	pinctrl_fwspiabr_default: fwspiabr_default {
+		function = "FWSPIABR";
+		groups = "FWSPIABR";
+	};
+
+	pinctrl_fwspid_default: fwspid_default {
+		function = "FWSPID";
+		groups = "FWSPID";
+	};
+
+	pinctrl_fwqspi_default: fwqspi_default {
+		function = "FWQSPI";
+		groups = "FWQSPI";
+	};
+
+	pinctrl_fwspiwp_default: fwspiwp_default {
+		function = "FWSPIWP";
+		groups = "FWSPIWP";
+	};
+
+	pinctrl_gpit0_default: gpit0_default {
+		function = "GPIT0";
+		groups = "GPIT0";
+	};
+
+	pinctrl_gpit1_default: gpit1_default {
+		function = "GPIT1";
+		groups = "GPIT1";
+	};
+
+	pinctrl_gpit2_default: gpit2_default {
+		function = "GPIT2";
+		groups = "GPIT2";
+	};
+
+	pinctrl_gpit3_default: gpit3_default {
+		function = "GPIT3";
+		groups = "GPIT3";
+	};
+
+	pinctrl_gpit4_default: gpit4_default {
+		function = "GPIT4";
+		groups = "GPIT4";
+	};
+
+	pinctrl_gpit5_default: gpit5_default {
+		function = "GPIT5";
+		groups = "GPIT5";
+	};
+
+	pinctrl_gpit6_default: gpit6_default {
+		function = "GPIT6";
+		groups = "GPIT6";
+	};
+
+	pinctrl_gpit7_default: gpit7_default {
+		function = "GPIT7";
+		groups = "GPIT7";
+	};
+
+	pinctrl_gpiu0_default: gpiu0_default {
+		function = "GPIU0";
+		groups = "GPIU0";
+	};
+
+	pinctrl_gpiu1_default: gpiu1_default {
+		function = "GPIU1";
+		groups = "GPIU1";
+	};
+
+	pinctrl_gpiu2_default: gpiu2_default {
+		function = "GPIU2";
+		groups = "GPIU2";
+	};
+
+	pinctrl_gpiu3_default: gpiu3_default {
+		function = "GPIU3";
+		groups = "GPIU3";
+	};
+
+	pinctrl_gpiu4_default: gpiu4_default {
+		function = "GPIU4";
+		groups = "GPIU4";
+	};
+
+	pinctrl_gpiu5_default: gpiu5_default {
+		function = "GPIU5";
+		groups = "GPIU5";
+	};
+
+	pinctrl_gpiu6_default: gpiu6_default {
+		function = "GPIU6";
+		groups = "GPIU6";
+	};
+
+	pinctrl_gpiu7_default: gpiu7_default {
+		function = "GPIU7";
+		groups = "GPIU7";
+	};
+
+	pinctrl_hvi3c3_default: hvi3c3_default {
+		function = "I3C3";
+		groups = "HVI3C3";
+	};
+
+	pinctrl_hvi3c4_default: hvi3c4_default {
+		function = "I3C4";
+		groups = "HVI3C4";
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		function = "I2C1";
+		groups = "I2C1";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c15_default: i2c15_default {
+		function = "I2C15";
+		groups = "I2C15";
+	};
+
+	pinctrl_i2c16_default: i2c16_default {
+		function = "I2C16";
+		groups = "I2C16";
+	};
+
+	pinctrl_i2c2_default: i2c2_default {
+		function = "I2C2";
+		groups = "I2C2";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_i3c3_default: i3c3_default {
+		function = "I3C3";
+		groups = "I3C3";
+	};
+
+	pinctrl_i3c4_default: i3c4_default {
+		function = "I3C4";
+		groups = "I3C4";
+	};
+
+	pinctrl_i3c5_default: i3c5_default {
+		function = "I3C5";
+		groups = "I3C5";
+	};
+
+	pinctrl_i3c6_default: i3c6_default {
+		function = "I3C6";
+		groups = "I3C6";
+	};
+
+	pinctrl_jtagm_default: jtagm_default {
+		function = "JTAGM";
+		groups = "JTAGM";
+	};
+
+	pinctrl_lhpd_default: lhpd_default {
+		function = "LHPD";
+		groups = "LHPD";
+	};
+
+	pinctrl_lhsirq_default: lhsirq_default {
+		function = "LHSIRQ";
+		groups = "LHSIRQ";
+	};
+
+	pinctrl_lpc_default: lpc_default {
+		function = "LPC";
+		groups = "LPC";
+	};
+
+	pinctrl_lpchc_default: lpchc_default {
+		function = "LPCHC";
+		groups = "LPCHC";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_lsirq_default: lsirq_default {
+		function = "LSIRQ";
+		groups = "LSIRQ";
+	};
+
+	pinctrl_maclink1_default: maclink1_default {
+		function = "MACLINK1";
+		groups = "MACLINK1";
+	};
+
+	pinctrl_maclink2_default: maclink2_default {
+		function = "MACLINK2";
+		groups = "MACLINK2";
+	};
+
+	pinctrl_maclink3_default: maclink3_default {
+		function = "MACLINK3";
+		groups = "MACLINK3";
+	};
+
+	pinctrl_maclink4_default: maclink4_default {
+		function = "MACLINK4";
+		groups = "MACLINK4";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_mdio3_default: mdio3_default {
+		function = "MDIO3";
+		groups = "MDIO3";
+	};
+
+	pinctrl_mdio4_default: mdio4_default {
+		function = "MDIO4";
+		groups = "MDIO4";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_nrts4_default: nrts4_default {
+		function = "NRTS4";
+		groups = "NRTS4";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pewake_default: pewake_default {
+		function = "PEWAKE";
+		groups = "PEWAKE";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm10g0_default: pwm10g0_default {
+		function = "PWM10";
+		groups = "PWM10G0";
+	};
+
+	pinctrl_pwm10g1_default: pwm10g1_default {
+		function = "PWM10";
+		groups = "PWM10G1";
+	};
+
+	pinctrl_pwm11g0_default: pwm11g0_default {
+		function = "PWM11";
+		groups = "PWM11G0";
+	};
+
+	pinctrl_pwm11g1_default: pwm11g1_default {
+		function = "PWM11";
+		groups = "PWM11G1";
+	};
+
+	pinctrl_pwm12g0_default: pwm12g0_default {
+		function = "PWM12";
+		groups = "PWM12G0";
+	};
+
+	pinctrl_pwm12g1_default: pwm12g1_default {
+		function = "PWM12";
+		groups = "PWM12G1";
+	};
+
+	pinctrl_pwm13g0_default: pwm13g0_default {
+		function = "PWM13";
+		groups = "PWM13G0";
+	};
+
+	pinctrl_pwm13g1_default: pwm13g1_default {
+		function = "PWM13";
+		groups = "PWM13G1";
+	};
+
+	pinctrl_pwm14g0_default: pwm14g0_default {
+		function = "PWM14";
+		groups = "PWM14G0";
+	};
+
+	pinctrl_pwm14g1_default: pwm14g1_default {
+		function = "PWM14";
+		groups = "PWM14G1";
+	};
+
+	pinctrl_pwm15g0_default: pwm15g0_default {
+		function = "PWM15";
+		groups = "PWM15G0";
+	};
+
+	pinctrl_pwm15g1_default: pwm15g1_default {
+		function = "PWM15";
+		groups = "PWM15G1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_pwm8g0_default: pwm8g0_default {
+		function = "PWM8";
+		groups = "PWM8G0";
+	};
+
+	pinctrl_pwm8g1_default: pwm8g1_default {
+		function = "PWM8";
+		groups = "PWM8G1";
+	};
+
+	pinctrl_pwm9g0_default: pwm9g0_default {
+		function = "PWM9";
+		groups = "PWM9G0";
+	};
+
+	pinctrl_pwm9g1_default: pwm9g1_default {
+		function = "PWM9";
+		groups = "PWM9G1";
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		function = "SPI1";
+		groups = "QSPI1";
+	};
+
+	pinctrl_qspi2_default: qspi2_default {
+		function = "SPI2";
+		groups = "QSPI2";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rgmii3_default: rgmii3_default {
+		function = "RGMII3";
+		groups = "RGMII3";
+	};
+
+	pinctrl_rgmii4_default: rgmii4_default {
+		function = "RGMII4";
+		groups = "RGMII4";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rmii3_default: rmii3_default {
+		function = "RMII3";
+		groups = "RMII3";
+	};
+
+	pinctrl_rmii4_default: rmii4_default {
+		function = "RMII4";
+		groups = "RMII4";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt10g0_default: salt10g0_default {
+		function = "SALT10";
+		groups = "SALT10G0";
+	};
+
+	pinctrl_salt10g1_default: salt10g1_default {
+		function = "SALT10";
+		groups = "SALT10G1";
+	};
+
+	pinctrl_salt11g0_default: salt11g0_default {
+		function = "SALT11";
+		groups = "SALT11G0";
+	};
+
+	pinctrl_salt11g1_default: salt11g1_default {
+		function = "SALT11";
+		groups = "SALT11G1";
+	};
+
+	pinctrl_salt12g0_default: salt12g0_default {
+		function = "SALT12";
+		groups = "SALT12G0";
+	};
+
+	pinctrl_salt12g1_default: salt12g1_default {
+		function = "SALT12";
+		groups = "SALT12G1";
+	};
+
+	pinctrl_salt13g0_default: salt13g0_default {
+		function = "SALT13";
+		groups = "SALT13G0";
+	};
+
+	pinctrl_salt13g1_default: salt13g1_default {
+		function = "SALT13";
+		groups = "SALT13G1";
+	};
+
+	pinctrl_salt14g0_default: salt14g0_default {
+		function = "SALT14";
+		groups = "SALT14G0";
+	};
+
+	pinctrl_salt14g1_default: salt14g1_default {
+		function = "SALT14";
+		groups = "SALT14G1";
+	};
+
+	pinctrl_salt15g0_default: salt15g0_default {
+		function = "SALT15";
+		groups = "SALT15G0";
+	};
+
+	pinctrl_salt15g1_default: salt15g1_default {
+		function = "SALT15";
+		groups = "SALT15G1";
+	};
+
+	pinctrl_salt16g0_default: salt16g0_default {
+		function = "SALT16";
+		groups = "SALT16G0";
+	};
+
+	pinctrl_salt16g1_default: salt16g1_default {
+		function = "SALT16";
+		groups = "SALT16G1";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_salt5_default: salt5_default {
+		function = "SALT5";
+		groups = "SALT5";
+	};
+
+	pinctrl_salt6_default: salt6_default {
+		function = "SALT6";
+		groups = "SALT6";
+	};
+
+	pinctrl_salt7_default: salt7_default {
+		function = "SALT7";
+		groups = "SALT7";
+	};
+
+	pinctrl_salt8_default: salt8_default {
+		function = "SALT8";
+		groups = "SALT8";
+	};
+
+	pinctrl_salt9g0_default: salt9g0_default {
+		function = "SALT9";
+		groups = "SALT9G0";
+	};
+
+	pinctrl_salt9g1_default: salt9g1_default {
+		function = "SALT9";
+		groups = "SALT9G1";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_emmc_default: emmc_default {
+		function = "EMMC";
+		groups = "EMMCG4";
+	};
+
+	pinctrl_sgpm1_default: sgpm1_default {
+		function = "SGPM1";
+		groups = "SGPM1";
+	};
+
+	pinctrl_sgpm2_default: sgpm2_default {
+		function = "SGPM2";
+		groups = "SGPM2";
+	};
+
+	pinctrl_sgps1_default: sgps1_default {
+		function = "SGPS1";
+		groups = "SGPS1";
+	};
+
+	pinctrl_sgps2_default: sgps2_default {
+		function = "SGPS2";
+		groups = "SGPS2";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1abr_default: spi1abr_default {
+		function = "SPI1ABR";
+		groups = "SPI1ABR";
+	};
+
+	pinctrl_spi1cs1_default: spi1cs1_default {
+		function = "SPI1CS1";
+		groups = "SPI1CS1";
+	};
+
+	pinctrl_spi1wp_default: spi1wp_default {
+		function = "SPI1WP";
+		groups = "SPI1WP";
+	};
+
+	pinctrl_spi2_default: spi2_default {
+		function = "SPI2";
+		groups = "SPI2";
+	};
+
+	pinctrl_spi2cs1_default: spi2cs1_default {
+		function = "SPI2CS1";
+		groups = "SPI2CS1";
+	};
+
+	pinctrl_spi2cs2_default: spi2cs2_default {
+		function = "SPI2CS2";
+		groups = "SPI2CS2";
+	};
+
+	pinctrl_tach0_default: tach0_default {
+		function = "TACH0";
+		groups = "TACH0";
+	};
+
+	pinctrl_tach1_default: tach1_default {
+		function = "TACH1";
+		groups = "TACH1";
+	};
+
+	pinctrl_tach10_default: tach10_default {
+		function = "TACH10";
+		groups = "TACH10";
+	};
+
+	pinctrl_tach11_default: tach11_default {
+		function = "TACH11";
+		groups = "TACH11";
+	};
+
+	pinctrl_tach12_default: tach12_default {
+		function = "TACH12";
+		groups = "TACH12";
+	};
+
+	pinctrl_tach13_default: tach13_default {
+		function = "TACH13";
+		groups = "TACH13";
+	};
+
+	pinctrl_tach14_default: tach14_default {
+		function = "TACH14";
+		groups = "TACH14";
+	};
+
+	pinctrl_tach15_default: tach15_default {
+		function = "TACH15";
+		groups = "TACH15";
+	};
+
+	pinctrl_tach2_default: tach2_default {
+		function = "TACH2";
+		groups = "TACH2";
+	};
+
+	pinctrl_tach3_default: tach3_default {
+		function = "TACH3";
+		groups = "TACH3";
+	};
+
+	pinctrl_tach4_default: tach4_default {
+		function = "TACH4";
+		groups = "TACH4";
+	};
+
+	pinctrl_tach5_default: tach5_default {
+		function = "TACH5";
+		groups = "TACH5";
+	};
+
+	pinctrl_tach6_default: tach6_default {
+		function = "TACH6";
+		groups = "TACH6";
+	};
+
+	pinctrl_tach7_default: tach7_default {
+		function = "TACH7";
+		groups = "TACH7";
+	};
+
+	pinctrl_tach8_default: tach8_default {
+		function = "TACH8";
+		groups = "TACH8";
+	};
+
+	pinctrl_tach9_default: tach9_default {
+		function = "TACH9";
+		groups = "TACH9";
+	};
+
+	pinctrl_thru0_default: thru0_default {
+		function = "THRU0";
+		groups = "THRU0";
+	};
+
+	pinctrl_thru1_default: thru1_default {
+		function = "THRU1";
+		groups = "THRU1";
+	};
+
+	pinctrl_thru2_default: thru2_default {
+		function = "THRU2";
+		groups = "THRU2";
+	};
+
+	pinctrl_thru3_default: thru3_default {
+		function = "THRU3";
+		groups = "THRU3";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart10_default: uart10_default {
+		function = "UART10";
+		groups = "UART10";
+	};
+
+	pinctrl_uart11_default: uart11_default {
+		function = "UART11";
+		groups = "UART11";
+	};
+
+	pinctrl_uart12g0_default: uart12g0_default {
+		function = "UART12";
+		groups = "UART12G0";
+	};
+
+	pinctrl_uart12g1_default: uart12g1_default {
+		function = "UART12";
+		groups = "UART12G1";
+	};
+
+	pinctrl_uart13g0_default: uart13g0_default {
+		function = "UART13";
+		groups = "UART13G0";
+	};
+
+	pinctrl_uart13g1_default: uart13g1_default {
+		function = "UART13";
+		groups = "UART13G1";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_uart7_default: uart7_default {
+		function = "UART7";
+		groups = "UART7";
+	};
+
+	pinctrl_uart8_default: uart8_default {
+		function = "UART8";
+		groups = "UART8";
+	};
+
+	pinctrl_uart9_default: uart9_default {
+		function = "UART9";
+		groups = "UART9";
+	};
+
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2ad_default: usb2ad_default {
+		function = "USB2AD";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USBB";
+	};
+
+	pinctrl_usb2bd_default: usb2bd_default {
+		function = "USB2BD";
+		groups = "USBB";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USBB";
+	};
+
+	pinctrl_vb_default: vb_default {
+		function = "VB";
+		groups = "VB";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+
+	pinctrl_wdtrst3_default: wdtrst3_default {
+		function = "WDTRST3";
+		groups = "WDTRST3";
+	};
+
+	pinctrl_wdtrst4_default: wdtrst4_default {
+		function = "WDTRST4";
+		groups = "WDTRST4";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
new file mode 100644
index 0000000000000..172dd748d8076
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -0,0 +1,1121 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+#include <dt-bindings/clock/ast2600-clock.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2600";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart1;
+		serial6 = &vuart2;
+		mdio0 = &mdio0;
+		mdio1 = &mdio1;
+		mdio2 = &mdio2;
+		mdio3 = &mdio3;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "aspeed,ast2600-smp";
+
+		cpu@f00 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf00>;
+		};
+
+		cpu@f01 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf01>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		clocks = <&syscon ASPEED_CLK_HPLL>;
+		arm,cpu-registers-not-fw-configured;
+		always-on;
+	};
+
+	edac: sdram@1e6e0000 {
+		compatible = "aspeed,ast2600-sdram-edac", "syscon";
+		reg = <0x1e6e0000 0x174>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges;
+
+		gic: interrupt-controller@40461000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			reg = <0x40461000 0x1000>,
+			    <0x40462000 0x1000>,
+			    <0x40464000 0x2000>,
+			    <0x40466000 0x2000>;
+			};
+
+		ahbc: bus@1e600000 {
+			compatible = "aspeed,ast2600-ahbc", "syscon";
+			reg = <0x1e600000 0x100>;
+		};
+
+		fmc: spi@1e620000 {
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi1: spi@1e630000 {
+			reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@1e631000 {
+			reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		mdio0: mdio@1e650000 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650000 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio1_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mdio1: mdio@1e650008 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650008 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio2_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mdio2: mdio@1e650010 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650010 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio3_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mdio3: mdio@1e650018 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650018 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio4_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mac0: ftgmac@1e660000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ftgmac@1e680000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		mac2: ftgmac@1e670000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e670000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
+			status = "disabled";
+		};
+
+		mac3: ftgmac@1e690000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e690000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2600-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#ports = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an
+			 * explicit pinmux override if EHCI is not enabled.
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2600-usb-vhub";
+			reg = <0x1e6a0000 0x350>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <7>;
+			aspeed,vhub-generic-endpoints = <21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ad_default>;
+			status = "disabled";
+		};
+
+		udc: usb@1e6a2000 {
+			compatible = "aspeed,ast2600-udc";
+			reg = <0x1e6a2000 0x300>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bd_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hace: crypto@1e6d0000 {
+				compatible = "aspeed,ast2600-hace";
+				reg = <0x1e6d0000 0x200>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1000>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				pinctrl: pinctrl {
+					compatible = "aspeed,ast2600-pinctrl";
+				};
+
+				silicon-id@14 {
+					compatible = "aspeed,ast2600-silicon-id", "aspeed,silicon-id";
+					reg = <0x14 0x4 0x5b0 0x8>;
+				};
+
+				smp-memram@180 {
+					compatible = "aspeed,ast2600-smpmem";
+					reg = <0x180 0x40>;
+				};
+
+				scu_ic0: interrupt-controller@560 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic0";
+					reg = <0x560 0x4>;
+					interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+
+				scu_ic1: interrupt-controller@570 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic1";
+					reg = <0x570 0x4>;
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+			};
+
+			rng: hwrng@1e6e2524 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2524 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2600-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				reg-io-width = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_GRAPHICS>;
+				syscon = <&syscon>;
+				status = "disabled";
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			xdma: xdma@1e6e7000 {
+				compatible = "aspeed,ast2600-xdma";
+				reg = <0x1e6e7000 0x100>;
+				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+				resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
+				reset-names = "device", "root-complex";
+				interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+						      <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
+				aspeed,pcie-device = "bmc";
+				aspeed,scu = <&syscon>;
+				status = "disabled";
+			};
+
+			adc0: adc@1e6e9000 {
+				compatible = "aspeed,ast2600-adc0";
+				reg = <0x1e6e9000 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			adc1: adc@1e6e9100 {
+				compatible = "aspeed,ast2600-adc1";
+				reg = <0x1e6e9100 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sbc: secure-boot-controller@1e6f2000 {
+				compatible = "aspeed,ast2600-sbc";
+				reg = <0x1e6f2000 0x1000>;
+			};
+
+			acry: crypto@1e6fa000 {
+				compatible = "aspeed,ast2600-acry";
+				reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
+				aspeed,ahbc = <&ahbc>;
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			gpio0: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-gpio";
+				reg = <0x1e780000 0x400>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 0 208>;
+				ngpios = <208>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sgpiom0: sgpiom@1e780500 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780500 0x100>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm1_default>;
+				status = "disabled";
+			};
+
+			sgpiom1: sgpiom@1e780600 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780600 0x100>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm2_default>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@1e780800 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-gpio";
+				reg = <0x1e780800 0x800>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 208 36>;
+				ngpios = <36>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2600-rtc";
+				reg = <0x1e781000 0x18>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			timer: timer@1e782000 {
+				compatible = "aspeed,ast2600-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts-extended = <&gic  GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				clock-names = "PCLK";
+				status = "disabled";
+                        };
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785000 0x40>;
+			};
+
+			wdt2: watchdog@1e785040 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785040 0x40>;
+				status = "disabled";
+			};
+
+			wdt3: watchdog@1e785080 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785080 0x40>;
+				status = "disabled";
+			};
+
+			wdt4: watchdog@1e7850c0 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e7850C0 0x40>;
+				status = "disabled";
+			};
+
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2600-peci";
+				reg = <0x1e78b000 0x100>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
+				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					kcs_chan = <1>;
+					status = "disabled";
+				};
+
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2600-lpc-ctrl";
+					reg = <0x80 0x80>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@80 {
+					compatible = "aspeed,ast2600-lpc-snoop";
+					reg = <0x80 0x80>;
+					interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2600-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2600-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				uart_routing: uart-routing@98 {
+					compatible = "aspeed,ast2600-uart-routing";
+					reg = <0x98 0x8>;
+					status = "disabled";
+				};
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2600-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+			};
+
+			sdc: sdc@1e740000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@1e740100 {
+					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@1e740200 {
+					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			emmc_controller: sdc@1e750000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e750000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e750000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
+				status = "disabled";
+
+				emmc: sdhci@1e750100 {
+					compatible = "aspeed,ast2600-sdhci";
+					reg = <0x100 0x100>;
+					sdhci,auto-cmd12;
+					interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_EMMC>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_emmc_default>;
+				};
+			};
+
+			vuart1: serial@1e787000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			vuart2: serial@1e788000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e788000 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
+				status = "disabled";
+			};
+
+			uart6: serial@1e790000 {
+				compatible = "ns16550a";
+				reg = <0x1e790000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART6CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart6_default>;
+
+				status = "disabled";
+			};
+
+			uart7: serial@1e790100 {
+				compatible = "ns16550a";
+				reg = <0x1e790100 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART7CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart7_default>;
+
+				status = "disabled";
+			};
+
+			uart8: serial@1e790200 {
+				compatible = "ns16550a";
+				reg = <0x1e790200 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART8CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart8_default>;
+
+				status = "disabled";
+			};
+
+			uart9: serial@1e790300 {
+				compatible = "ns16550a";
+				reg = <0x1e790300 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART9CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart9_default>;
+
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+
+			fsim0: fsi@1e79b000 {
+				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				reg = <0x1e79b000 0x94>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi1_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				status = "disabled";
+			};
+
+			fsim1: fsi@1e79b100 {
+				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				reg = <0x1e79b100 0x94>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi2_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				status = "disabled";
+			};
+
+			udma: dma-controller@1e79e000 {
+				compatible = "aspeed,ast2600-udma";
+				reg = <0x1e79e000 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <28>;
+				#dma-cells = <1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "aspeed-g6-pinctrl.dtsi"
+
+&i2c {
+	i2c0: i2c-bus@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_default>;
+		status = "disabled";
+	};
+
+	i2c1: i2c-bus@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x100 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_default>;
+		status = "disabled";
+	};
+
+	i2c2: i2c-bus@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x180 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c-bus@200 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x200 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c-bus@280 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x280 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c-bus@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x300 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c-bus@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x380 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c-bus@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x400 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c-bus@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x480 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c-bus@500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x500 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c-bus@580 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x580 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c-bus@600 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x600 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c-bus@680 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x680 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c-bus@700 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x700 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+
+	i2c14: i2c-bus@780 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x780 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c15_default>;
+		status = "disabled";
+	};
+
+	i2c15: i2c-bus@800 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x800 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c16_default>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ast2400-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2400-facebook-netbmc-common.dtsi
new file mode 100644
index 0000000000000..4e5e786e18b77
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ast2400-facebook-netbmc-common.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+
+/ {
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+#include "facebook-bmc-flash-layout.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default
+		     &pinctrl_ndts4_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2500-facebook-netbmc-common.dtsi
new file mode 100644
index 0000000000000..c0c43b8644eee
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ast2500-facebook-netbmc-common.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+/*
+ * Update reset type to "system" (full chip) to fix warm reboot hang issue
+ * when reset type is set to default ("soc", gated by reset mask registers).
+ */
+&wdt1 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	fmc_flash0: flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+	};
+
+	fmc_flash1: flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+	};
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
new file mode 100644
index 0000000000000..31590d3186a2e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+		spi1 = &spi1;
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw vmalloc=640M";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+
+		tpmdev@0 {
+			compatible = "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+
+#include "facebook-bmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x8000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi
new file mode 100644
index 0000000000000..7f3652dea550b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/*
+	 * u-boot partition: 896KB.
+	 */
+	u-boot@0 {
+		reg = <0x0 0xe0000>;
+		label = "u-boot";
+	};
+
+	/*
+	 * u-boot environment variables: 64KB.
+	 */
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x10000>;
+		label = "env";
+	};
+
+	/*
+	 * image metadata partition (64KB), used by Facebook internal
+	 * tools.
+	 */
+	image-meta@f0000 {
+		reg = <0xf0000 0x10000>;
+		label = "meta";
+	};
+
+	/*
+	 * FIT image: 119 MB.
+	 */
+	fit@100000 {
+		reg = <0x100000 0x7700000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition (8MB) is used by Facebook BMC platforms as
+	 * persistent data store.
+	 */
+	data0@7800000 {
+		reg = <0x7800000 0x800000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x8000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout.dtsi
new file mode 100644
index 0000000000000..87bb8b5762500
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0x60000>;
+		label = "u-boot";
+	};
+
+	u-boot-env@60000 {
+		reg = <0x60000 0x20000>;
+		label = "env";
+	};
+
+	fit@80000 {
+		reg = <0x80000 0x1b80000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition is used by several Facebook BMC platforms
+	 * as persistent data store.
+	 */
+	data0@1c00000 {
+		reg = <0x1c00000 0x400000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x2000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power9-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power9-dual.dtsi
new file mode 100644
index 0000000000000..a0fa65b44b0fb
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power9-dual.dtsi
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2018 IBM Corp
+
+&fsi {
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam0_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam0_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam0_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam0_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam0_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam0_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam0_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam0_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ@1 {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam1_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam1_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam1_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam1_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam1_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam1_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam1_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam1_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam1_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ@2 {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c102 = &cfam0_i2c2;
+		i2c103 = &cfam0_i2c3;
+		i2c104 = &cfam0_i2c4;
+		i2c105 = &cfam0_i2c5;
+		i2c106 = &cfam0_i2c6;
+		i2c107 = &cfam0_i2c7;
+		i2c108 = &cfam0_i2c8;
+		i2c109 = &cfam0_i2c9;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c200 = &cfam1_i2c0;
+		i2c201 = &cfam1_i2c1;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c204 = &cfam1_i2c4;
+		i2c205 = &cfam1_i2c5;
+		i2c206 = &cfam1_i2c6;
+		i2c207 = &cfam1_i2c7;
+		i2c208 = &cfam1_i2c8;
+		i2c209 = &cfam1_i2c9;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c212 = &cfam1_i2c12;
+		i2c213 = &cfam1_i2c13;
+		i2c214 = &cfam1_i2c14;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/openbmc-flash-layout-128.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-128.dtsi
new file mode 100644
index 0000000000000..05101a38c5bd2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-128.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0xe0000>; // 896KB
+		label = "u-boot";
+	};
+
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
+		label = "u-boot-env";
+	};
+
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
+		label = "kernel";
+	};
+
+	rofs@a00000 {
+		reg = <0xa00000 0x5600000>; // 86MB
+		label = "rofs";
+	};
+
+	rwfs@6000000 {
+		reg = <0x6000000 0x2000000>; // 32MB
+		label = "rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi
new file mode 100644
index 0000000000000..6505258675612
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Bytedance.
+ */
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0xe0000>; // 896KB
+		label = "alt-u-boot";
+	};
+
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
+		label = "alt-u-boot-env";
+	};
+
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
+		label = "alt-kernel";
+	};
+
+	rofs@a00000 {
+		reg = <0xa00000 0x2000000>; // 32MB
+		label = "alt-rofs";
+	};
+
+	rwfs@6000000 {
+		reg = <0x2a00000 0x1600000>; // 22MB
+		label = "alt-rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64.dtsi
new file mode 100644
index 0000000000000..7af41361c4800
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Bytedance.
+ */
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0xe0000>; // 896KB
+		label = "u-boot";
+	};
+
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
+		label = "u-boot-env";
+	};
+
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
+		label = "kernel";
+	};
+
+	rofs@a00000 {
+		reg = <0xa00000 0x2000000>; // 32MB
+		label = "rofs";
+	};
+
+	rwfs@2a00000 {
+		reg = <0x2a00000 0x1600000>; // 22MB
+		label = "rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout.dtsi
new file mode 100644
index 0000000000000..b47e14063c380
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0x60000>;
+		label = "u-boot";
+	};
+
+	u-boot-env@60000 {
+		reg = <0x60000 0x20000>;
+		label = "u-boot-env";
+	};
+
+	kernel@80000 {
+		reg = <0x80000 0x440000>;
+		label = "kernel";
+	};
+
+	rofs@4c0000 {
+		reg = <0x4c0000 0x1740000>;
+		label = "rofs";
+	};
+
+	rwfs@1c00000 {
+		reg = <0x1c00000 0x400000>;
+		label = "rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi
deleted file mode 100644
index 4e5e786e18b77..0000000000000
--- a/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2020 Facebook Inc.
-/dts-v1/;
-
-#include "aspeed-g4.dtsi"
-
-/ {
-	aliases {
-		/*
-		 * Override the default uart aliases to avoid breaking
-		 * the legacy applications.
-		 */
-		serial0 = &uart5;
-		serial1 = &uart1;
-		serial2 = &uart3;
-		serial3 = &uart4;
-	};
-
-	memory@40000000 {
-		reg = <0x40000000 0x20000000>;
-	};
-};
-
-&wdt1 {
-	status = "okay";
-	aspeed,reset-type = "system";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "spi0.0";
-#include "facebook-bmc-flash-layout.dtsi"
-	};
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default
-		     &pinctrl_rxd3_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-		     &pinctrl_rxd4_default
-		     &pinctrl_ndts4_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
deleted file mode 100644
index c0c43b8644eee..0000000000000
--- a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2019 Facebook Inc.
-
-#include "aspeed-g5.dtsi"
-
-/ {
-	memory@80000000 {
-		reg = <0x80000000 0x40000000>;
-	};
-};
-
-/*
- * Update reset type to "system" (full chip) to fix warm reboot hang issue
- * when reset type is set to default ("soc", gated by reset mask registers).
- */
-&wdt1 {
-	status = "okay";
-	aspeed,reset-type = "system";
-};
-
-&wdt2 {
-	status = "disabled";
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default
-		     &pinctrl_rxd3_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&fmc {
-	status = "okay";
-
-	fmc_flash0: flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "spi0.0";
-	};
-
-	fmc_flash1: flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "spi0.1";
-	};
-};
-
-&mac1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&rtc {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&sdmmc {
-	status = "okay";
-};
-
-&sdhci1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sd2_default>;
-};
diff --git a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
deleted file mode 100644
index 31590d3186a2e..0000000000000
--- a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
+++ /dev/null
@@ -1,169 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2020 Facebook Inc.
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	aliases {
-		mmc0 = &emmc;
-		spi1 = &spi1;
-		spi2 = &spi_gpio;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw vmalloc=640M";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	/*
-	 * GPIO-based SPI Master is required to access SPI TPM, because
-	 * full-duplex SPI transactions are not supported by ASPEED SPI
-	 * Controllers.
-	 */
-	spi_gpio: spi {
-		status = "okay";
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
-
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
-			spi-max-frequency = <33000000>;
-			reg = <0>;
-		};
-	};
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "spi0.0";
-
-#include "facebook-bmc-flash-layout-128.dtsi"
-	};
-
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "spi0.1";
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			flash1@0 {
-				reg = <0x0 0x8000000>;
-				label = "flash1";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&wdt1 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&i2c15 {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&emmc_controller {
-	status = "okay";
-};
-
-&emmc {
-	status = "okay";
-
-	non-removable;
-	max-frequency = <25000000>;
-	bus-width = <4>;
-};
-
-&rtc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
deleted file mode 100644
index 713d18f803568..0000000000000
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based)
- *
- * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>,
- *                    Robert Nelson <robertcnelson@gmail.com>
- */
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-
-/ {
-	model = "Acme Systems Aria G25";
-	compatible = "acme,ariag25", "atmel,at91sam9x5ek",
-		     "atmel,at91sam9x5", "atmel,at91sam9";
-
-	aliases {
-		serial5 = &uart0;
-		serial6 = &uart1;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
-	};
-
-	memory@20000000 {
-		/* 128 MB, change this for 256 MB revision */
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* little green LED in middle of Aria G25 module */
-		aria_led {
-			label = "aria_led";
-			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
-			linux,default-trigger = "heartbeat";
-		};
-
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_w1_0>;
-	};
-};
-
-&adc0 {
-	status = "okay";
-	atmel,adc-channels-used = <0xf>;
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-/* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
-
-&macb0 {
-	phy-mode = "rmii";
-	/*
-	 * following can be overwritten by bootloader:
-	 * for example u-boot 'ftd set' command
-	 */
-	local-mac-address = [00 00 00 00 00 00];
-	status = "okay";
-};
-
-
-&mmc0 {
-	/* N.B. Aria has no SD card detect (CD), assumed present */
-
-	pinctrl-0 = <
-		&pinctrl_mmc0_slot0_clk_cmd_dat0
-		&pinctrl_mmc0_slot0_dat1_3>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
-};
-
-&pinctrl {
-	w1_0 {
-		pinctrl_w1_0: w1_0-0 {
-			atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
-		};
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&tcb0 {
-	timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
-
-	timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
-};
-
-/*
- * UART0/1 pins are marked as GPIO on
- * Aria documentation.
- * Change to "okay" if you need additional serial ports
- */
-&uart0 {
-	status = "disabled";
-};
-
-&uart1 {
-	status = "disabled";
-};
-
-&usart0 {
-	pinctrl-0 = <&pinctrl_usart0
-		     &pinctrl_usart0_rts
-		     &pinctrl_usart0_cts>;
-	status = "okay";
-};
-
-&usart1 {
-	pinctrl-0 = <&pinctrl_usart1
-		     /* &pinctrl_usart1_rts */
-		     /* &pinctrl_usart1_cts */
-		    >;
-	status = "okay";
-};
-
-&usart2 {
-	/* cannot activate RTS2+CTS2, clash with
-	 * ethernet on PB0 and PB1 */
-	pinctrl-0 = <&pinctrl_usart2>;
-	status = "okay";
-};
-
-&usart3 {
-	compatible = "atmel,at91sam9260-usart";
-	reg = <0xf8028000 0x200>;
-	interrupts = <8 4 5>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usart3
-		     /* &pinctrl_usart3_rts */
-		     /* &pinctrl_usart3_cts */
-		    >;
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	num-ports = <3>;
-};
-
-&usb1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts
deleted file mode 100644
index 2c52a71752c2d..0000000000000
--- a/arch/arm/boot/dts/at91-ariettag25.dts
+++ /dev/null
@@ -1,87 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Arietta G25
- * This device tree is minimal, to activate more peripherals, see:
- * http://dts.acmesystems.it/arietta/
- */
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-
-/ {
-	model = "Acme Systems Arietta G25";
-	compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		arietta_led {
-			label = "arietta_led";
-			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&mmc0 {
-	pinctrl-0 = <
-		&pinctrl_mmc0_slot0_clk_cmd_dat0
-		&pinctrl_mmc0_slot0_dat1_3>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&tcb0 {
-	timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
-
-	timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
-};
-
-&usb0 {
-	num-ports = <3>;
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
deleted file mode 100644
index ee0f5da6d8197..0000000000000
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-cosino.dtsi - Device Tree file for Cosino core module
- *
- * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
- *			HCE Engineering
- *
- * Derived from at91sam9x5ek.dtsi by:
- *	Copyright (C) 2012 Atmel,
- *	2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-
-#include "at91sam9g35.dtsi"
-
-/ {
-	model = "HCE Cosino core module";
-	compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-};
-
-&adc0 {
-	atmel,adc-ts-wires = <4>;
-	atmel,adc-ts-pressure-threshold = <10000>;
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_addr_nand
-		     &pinctrl_ebi_data_0_7>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand-controller {
-		pinctrl-0 = <&pinctrl_nand_oe_we
-			     &pinctrl_nand_cs
-			     &pinctrl_nand_rb>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		nand@3 {
-			reg = <0x3 0x0 0x800000>;
-			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <4>;
-			nand-ecc-step-size = <512>;
-			nand-on-flash-bbt;
-			label = "atmel_nand";
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				at91bootstrap@0 {
-					label = "at91bootstrap";
-					reg = <0x0 0x40000>;
-				};
-
-				uboot@40000 {
-					label = "u-boot";
-					reg = <0x40000 0x80000>;
-				};
-
-				ubootenv@c0000 {
-					label = "U-Boot Env";
-					reg = <0xc0000 0x140000>;
-				};
-
-				kernel@200000 {
-					label = "kernel";
-					reg = <0x200000 0x600000>;
-				};
-
-				rootfs@800000 {
-					label = "rootfs";
-					reg = <0x800000 0x0f800000>;
-				};
-			};
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&mmc0 {
-	pinctrl-0 = <
-		&pinctrl_board_mmc0
-		&pinctrl_mmc0_slot0_clk_cmd_dat0
-		&pinctrl_mmc0_slot0_dat1_3>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&pinctrl {
-	mmc0 {
-		pinctrl_board_mmc0: mmc0-board {
-			atmel,pins =
-				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
-		};
-	};
-};
-
-&tcb0 {
-	timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
-
-	timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
-};
-
-&usart0 {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts
deleted file mode 100644
index 04cb7bee937d3..0000000000000
--- a/arch/arm/boot/dts/at91-cosino_mega2560.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
- *			      Mega 2560 extension
- *
- * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
- *			HCE Engineering
- *
- * Derived from at91sam9g35ek.dts by:
- * 	Copyright (C) 2012 Atmel,
- *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-
-/dts-v1/;
-#include "at91-cosino.dtsi"
-
-/ {
-	model = "HCE Cosino Mega 2560";
-	compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
-};
-
-&adc0 {
-	atmel,adc-ts-wires = <4>;
-	atmel,adc-ts-pressure-threshold = <10000>;
-	status = "okay";
-};
-
-&macb0 {
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-0 = <
-		&pinctrl_mmc1_slot0_clk_cmd_dat0
-		&pinctrl_mmc1_slot0_dat1_3>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		non-removable;
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&usart1 {
-	status = "okay";
-};
-
-&usart2 {
-	status = "okay";
-};
-
-&usb0 {
-	num-ports = <3>;
-	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
-			   &pioD 19 GPIO_ACTIVE_LOW
-			   &pioD 20 GPIO_ACTIVE_LOW
-			  >;
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
-	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-dvk_som60.dts b/arch/arm/boot/dts/at91-dvk_som60.dts
deleted file mode 100644
index ededd5b0d27bc..0000000000000
--- a/arch/arm/boot/dts/at91-dvk_som60.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board
- *
- *  Copyright (C) 2018 Laird,
- *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
- *
- */
-/dts-v1/;
-#include "at91-som60.dtsi"
-#include "at91-dvk_su60_somc.dtsi"
-#include "at91-dvk_su60_somc_lcm.dtsi"
-
-/ {
-	model = "Laird DVK SOM60";
-	compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
-
-	chosen {
-		stdout-path = &dbgu;
-		tick-timer = &pit;
-	};
-};
-
-&mmc0 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-};
-
-&ssc0 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&usart1 {
-	status = "okay";
-};
-
-&usart2 {
-	status = "okay";
-};
-
-&usart3 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&pit {
-	status = "okay";
-};
-
-&adc0 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&macb0 {
-	status = "okay";
-};
-
-&macb1 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
-
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
deleted file mode 100644
index 3542ad8a243ea..0000000000000
--- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board
- *
- *  Copyright (C) 2018 Laird,
- *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
- *
- */
-
-/ {
-	sound {
-		compatible = "atmel,asoc-wm8904";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
-
-		atmel,model = "wm8904 @ DVK-SOM60";
-		atmel,audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"IN2L", "Line In Jack",
-			"IN2R", "Line In Jack",
-			"Mic", "MICBIAS",
-			"IN1L", "Mic";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8904>;
-
-		status = "okay";
-	};
-};
-
-&mmc0 {
-	status = "okay";
-
-	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
-	slot@0 {
-		bus-width = <4>;
-		cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
-		cd-inverted;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
-	flash@0 {
-		compatible = "mxicy,mx25u4035", "jedec,spi-nor";
-		spi-max-frequency = <33000000>;
-		reg = <0>;
-	};
-};
-
-&ssc0 {
-	atmel,clk-from-rk-pin;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	wm8904: wm8904@1a {
-		compatible = "wlf,wm8904";
-		reg = <0x1a>;
-		clocks = <&pmc PMC_TYPE_SYSTEM 10>;
-		clock-names = "mclk";
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	eeprom@57 {
-		compatible = "giantec,gt24c32a", "atmel,24c32";
-		reg = <0x57>;
-		pagesize = <32>;
-	};
-};
-
-&usart1 {
-	status = "okay";
-};
-
-&usart2 {
-	status = "okay";
-};
-
-&usart3 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&pit {
-	status = "okay";
-};
-
-&adc0 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&macb0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	ethernet-phy@7 {
-		reg = <7>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_geth_int>;
-		interrupt-parent = <&pioB>;
-		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-		txen-skew-ps = <800>;
-		txc-skew-ps = <3000>;
-		rxdv-skew-ps = <400>;
-		rxc-skew-ps = <3000>;
-		rxd0-skew-ps = <400>;
-		rxd1-skew-ps = <400>;
-		rxd2-skew-ps = <400>;
-		rxd3-skew-ps = <400>;
-	};
-};
-
-&macb1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	ethernet-phy@1 {
-		reg = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eth_int>;
-		interrupt-parent = <&pioC>;
-		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
-
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
deleted file mode 100644
index bea920b192b65..0000000000000
--- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board
- *
- *  Copyright (C) 2018 Laird,
- *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
- *
- */
-
-/ {
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 50000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	panel: panel {
-		compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92";
-		backlight = <&backlight>;
-		power-supply = <&vcc_lcd_reg>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&hlcdc_panel_output>;
-			};
-		};
-	};
-
-	vcc_lcd_reg: fixedregulator_lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC LCM";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-		status = "okay";
-	};
-};
-
-&pinctrl {
-	board {
-		pinctrl_lcd_ctp_int: lcd_ctp_int {
-			 atmel,pins =
-				 <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	ft5426@38 {
-		compatible = "focaltech,ft5426", "edt,edt-ft5406";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd_ctp_int>;
-
-		interrupt-parent = <&pioC>;
-		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
-
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-	};
-};
-
-&hlcdc {
-	status = "okay";
-
-	hlcdc-display-controller {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-
-		port@0 {
-			hlcdc_panel_output: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&panel_input>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
deleted file mode 100644
index 9dfd5de808d18..0000000000000
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board
- *
- * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC)
- *
- * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>
- */
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-
-/ {
-	model = "Acme Systems FoxG20";
-	compatible = "acme,foxg20", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			mmc0: mmc@fffa8000 {
-				pinctrl-0 = <
-					&pinctrl_mmc0_clk
-					&pinctrl_mmc0_slot1_cmd_dat0
-					&pinctrl_mmc0_slot1_dat1_3>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				slot@1 {
-					reg = <1>;
-					bus-width = <4>;
-				};
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 =
-					<&pinctrl_usart0
-					 &pinctrl_usart0_rts
-					 &pinctrl_usart0_cts
-					>;
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			usart2: serial@fffb8000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-			};
-
-			uart0: serial@fffd4000 {
-				status = "okay";
-			};
-
-			uart1: serial@fffd8000 {
-				status = "okay";
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				board {
-					pinctrl_pck0_as_mck: pck0_as_mck {
-						atmel,pins =
-							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				mmc0_slot1 {
-					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
-						atmel,pins =
-							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* CD pin */
-					};
-				};
-
-				i2c0 {
-					pinctrl_i2c0: i2c0-0 {
-						atmel,pins =
-							<AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE	/* TWD (SDA), open drain */
-							 AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>;	/* TWCK (SCL), open drain */
-					};
-				};
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-
-	i2c-gpio-0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c0>;
-		i2c-gpio,delay-us = <5>;	/* ~85 kHz */
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* red LED marked "PC7" near mini USB (device) receptacle */
-		user_led {
-			label = "user_led";
-			gpios = <&pioC 7 GPIO_ACTIVE_HIGH>;	/* PC7 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button {
-			label = "Button";
-			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
-			linux,code = <0x103>;
-			wakeup-source;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
deleted file mode 100644
index 551300fd77469..0000000000000
--- a/arch/arm/boot/dts/at91-gatwick.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-gatwick.dts - Device Tree file for the Gatwick board
- *
- *  Copyright (C) 2018 Laird
- *
- */
-/dts-v1/;
-#include "at91-wb50n.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Laird Workgroup Bridge 50N - Project Gatwick";
-	compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio>;
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_SETUP>;
-			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-ethernet {
-			label = "gatwick:yellow:ethernet";
-			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-wifi {
-			label = "gatwick:green:wifi";
-			gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-ble {
-			label = "gatwick:blue:ble";
-			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-lora {
-			label = "gatwick:orange:lora";
-			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-blank {
-			label = "gatwick:green:blank";
-			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-user {
-			label = "gatwick:yellow:user";
-			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-};
-
-&pinctrl {
-	board {
-		pinctrl_key_gpio: key_gpio_0 {
-		  atmel,pins =
-			  <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */
-	  };
-	};
-};
-
-&mmc0 {
-	status = "okay";
-};
-
-&macb1 {
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-/* FTDI USART */
-&usart0 {
-	status = "okay";
-};
-
-/* GPS USART */
-&usart1 {
-	pinctrl-0 = <&pinctrl_usart1>;
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-
-	spidev@0 {
-		compatible = "semtech,sx1301";
-		reg = <0>;
-		spi-max-frequency = <8000000>;
-	};
-};
-
-&usb1 {
-	status = "okay";
-	/delete-property/atmel,oc-gpio;
-};
-
-&usb2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
deleted file mode 100644
index 307663b4eec25..0000000000000
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
- *
- * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
- *               2014-2015 Gaël PORTAY <g.portay@overkiz.com>
- */
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Overkiz Kizbox";
-	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = &dbgu;
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x2000000>;
-	};
-
-	clocks {
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-reset {
-			label = "PB_RST";
-			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-
-		button-user {
-			label = "PB_USER";
-			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x101>;
-			wakeup-source;
-		};
-	};
-
-	led-controller {
-		compatible = "pwm-leds";
-
-		led-1 {
-			label = "pwm:green:network";
-			pwms = <&tcb1_pwm1 0 10000000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-2 {
-			label = "pwm:red:network";
-			pwms = <&tcb1_pwm2 0 10000000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-3 {
-			label = "pwm:green:user";
-			pwms = <&tcb1_pwm0 0 10000000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-4 {
-			label = "pwm:red:user";
-			pwms = <&tcb1_pwm0 1 10000000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-};
-
-&tcb0 {
-	timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>, <1>;
-	};
-
-	timer@2 {
-		compatible = "atmel,tcb-timer";
-		reg = <2>;
-	};
-};
-
-&tcb1 {
-	tcb1_pwm0: pwm@0 {
-		compatible = "atmel,tcb-pwm";
-		reg = <0>;
-		#pwm-cells = <3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tcb1_tioa0 &pinctrl_tcb1_tiob0>;
-	};
-
-	tcb1_pwm1: pwm@1 {
-		compatible = "atmel,tcb-pwm";
-		reg = <1>;
-		#pwm-cells = <3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tcb1_tioa1>;
-	};
-
-	tcb1_pwm2: pwm@2 {
-		compatible = "atmel,tcb-pwm";
-		reg = <2>;
-		#pwm-cells = <3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tcb1_tioa2>;
-	};
-};
-
-&ebi {
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-	pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-	pinctrl-names = "default";
-
-	nand@3 {
-		reg = <0x3 0x0 0x800000>;
-		rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-		nand-bus-width = <8>;
-		nand-ecc-mode = "soft";
-		nand-on-flash-bbt;
-		label = "atmel_nand";
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			bootstrap@0 {
-				label = "bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			ubi@20000 {
-				label = "ubi";
-				reg = <0x20000 0x7fe0000>;
-			};
-		};
-	};
-};
-
-&macb0 {
-	phy-mode = "mii";
-	pinctrl-0 = <&pinctrl_macb_rmii
-		     &pinctrl_macb_rmii_mii_alt>;
-	status = "okay";
-};
-
-&usart3 {
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&watchdog {
-	timeout-sec = <15>;
-	atmel,max-heartbeat-sec = <16>;
-	atmel,min-heartbeat-sec = <0>;
-	status = "okay";
-};
-
-&usb0 {
-	num-ports = <1>;
-	status = "okay";
-};
-
-&i2c_gpio0 {
-	status = "okay";
-
-	rtc: pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
diff --git a/arch/arm/boot/dts/at91-kizbox2-2.dts b/arch/arm/boot/dts/at91-kizbox2-2.dts
deleted file mode 100644
index cab8b3579efab..0000000000000
--- a/arch/arm/boot/dts/at91-kizbox2-2.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-kizbox2-2.dts - Device Tree file for the Kizbox2 with
- * two head board
- *
- * Copyright (C) 2015 Overkiz SAS
- *
- * Authors: Antoine Aubert <a.aubert@overkiz.com>
- *	    Kévin Raymond <k.raymond@overkiz.com>
- */
-/dts-v1/;
-#include "at91-kizbox2-common.dtsi"
-
-/ {
-	model = "Overkiz Kizbox 2 with two heads";
-	compatible = "overkiz,kizbox2-2", "atmel,sama5d31",
-		     "atmel,sama5d3", "atmel,sama5";
-};
-
-&usart1 {
-	status = "okay";
-};
-
-&usart2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
deleted file mode 100644
index e5e21dff882fb..0000000000000
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ /dev/null
@@ -1,256 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-kizbox2_common.dtsi - Device Tree Include file for
- * Overkiz Kizbox 2 family SoC
- *
- * Copyright (C) 2014-2018 Overkiz SAS
- *
- * Authors: Antoine Aubert <a.aubert@overkiz.com>
- *          Gaël Portay <g.portay@overkiz.com>
- *          Kévin Raymond <k.raymond@overkiz.com>
- */
-#include "sama5d31.dtsi"
-
-/ {
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = &dbgu;
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-prog {
-			label = "PB_PROG";
-			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-			wakeup-source;
-		};
-
-		button-reset {
-			label = "PB_RST";
-			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-
-		button-user {
-			label = "PB_USER";
-			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x101>;
-			wakeup-source;
-		};
-	};
-
-	led-controller {
-		compatible = "pwm-leds";
-
-		led-1 {
-			label = "pwm:blue:user";
-			pwms = <&pwm0 2 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "none";
-		};
-
-		led-2 {
-			label = "pwm:green:user";
-			pwms = <&pwm0 1 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-3 {
-			label = "pwm:red:user";
-			pwms = <&pwm0 0 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	pmic: act8865@5b {
-		compatible = "active-semi,act8865";
-		reg = <0x5b>;
-		status = "okay";
-
-		regulators {
-			vcc_1v8_reg: DCDC_REG1 {
-				regulator-name = "VCC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vcc_1v2_reg: DCDC_REG2 {
-				regulator-name = "VCC_1V2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vcc_3v3_reg: DCDC_REG3 {
-				regulator-name = "VCC_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vddfuse_reg: LDO_REG1 {
-				regulator-name = "FUSE_2V5";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-			};
-
-			vddana_reg: LDO_REG2 {
-				regulator-name = "VDDANA";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vled_reg: LDO_REG3 {
-				regulator-name = "VLED";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			v3v8_rf_reg: LDO_REG4 {
-				regulator-name = "V3V8_RF";
-				regulator-min-microvolt = <3800000>;
-				regulator-max-microvolt = <3800000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&usart0 {
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "disabled";
-};
-
-&usart1 {
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "disabled";
-};
-
-&usart2 {
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "disabled";
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
-		     &pinctrl_pwm0_pwmh1_1
-		     &pinctrl_pwm0_pwmh2_0>;
-	status = "okay";
-};
-
-&adc0 {
-	atmel,adc-vref = <3333>;
-	status = "okay";
-};
-
-&macb1 {
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@3 {
-		reg = <0x3 0x0 0x2>;
-		atmel,rb = <0>;
-		nand-bus-width = <8>;
-		nand-ecc-mode = "hw";
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-on-flash-bbt;
-		label = "atmel_nand";
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			bootstrap@0 {
-				label = "bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			ubi@20000 {
-				label = "ubi";
-				reg = <0x20000 0x7fe0000>;
-			};
-		};
-	};
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
-
-/* WMBUS (inverted with IO in the latest schematic) */
-&pinctrl_usart0 {
-	atmel,pins =
-		<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
-		 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-		 AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
-};
-
-/* RTS */
-&pinctrl_usart1 {
-	atmel,pins =
-		<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE
-		 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-		 AT91_PIOE 7 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
-};
-
-/* IO (inverted with WMBUS in the latest schematic) */
-&pinctrl_usart2 {
-	atmel,pins =
-		<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE
-		 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
-		 AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
-};
diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
deleted file mode 100644
index 7075df6549e99..0000000000000
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ /dev/null
@@ -1,309 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board
- *
- * Copyright (C) 2018 Overkiz SAS
- *
- * Authors: Dorian Rocipon <d.rocipon@overkiz.com>
- *          Kevin Carli <k.carli@overkiz.com>
- *          Mickael Gardet <m.gardet@overkiz.com>
- */
-/dts-v1/;
-#include "at91-kizbox3_common.dtsi"
-
-/ {
-	model = "Overkiz KIZBOX3-HS";
-	compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5";
-
-	led-controller-1 {
-		status = "okay";
-
-		led-1 {
-			status = "okay";
-		};
-
-		led-2 {
-			status = "okay";
-		};
-
-		led-3 {
-			status = "okay";
-		};
-
-		led-4 {
-			status = "okay";
-		};
-	};
-
-	led-controller-2  {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led_red
-			     &pinctrl_led_white>;
-		status = "okay";
-
-		led-5 {
-			label = "pio:red:user";
-			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-6 {
-			label = "pio:white:user";
-			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default" , "default", "default",
-				"default", "default" ;
-		pinctrl-0 = <&pinctrl_key_gpio_default>;
-		pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>;
-		pinctrl-2 = <&pinctrl_pio_io_boot
-			     &pinctrl_pio_io_reset
-			     &pinctrl_pio_io_test_radio>;
-		pinctrl-3 = <&pinctrl_pio_zbe_test_radio
-			     &pinctrl_pio_zbe_rst>;
-		pinctrl-4 = <&pinctrl_pio_input>;
-
-		switch-1 {
-			label = "SW1";
-			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x101>;
-			wakeup-source;
-		};
-
-		switch-2 {
-			label = "SW2";
-			gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-			wakeup-source;
-		};
-
-		switch-3 {
-			label = "SW3";
-			gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
-			linux,code = <0x103>;
-			wakeup-source;
-		};
-
-		switch-7 {
-			label = "SW7";
-			gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
-			linux,code = <0x107>;
-			wakeup-source;
-		};
-
-		switch-8 {
-			label = "SW8";
-			gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
-			linux,code = <0x108>;
-			wakeup-source;
-		};
-	};
-
-	gpios {
-		compatible = "gpio";
-		status = "okay";
-
-		rf_on {
-			label = "rf on";
-			gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>;
-			output;
-			init-low;
-		};
-
-		wifi_on {
-			label = "wifi on";
-			gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>;
-			output;
-			init-low;
-		};
-
-		zbe_test_radio {
-			label = "zbe test radio";
-			gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>;
-			output;
-			init-low;
-		};
-
-		zbe_rst {
-			label = "zbe rst";
-			gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>;
-			output;
-			init-low;
-		};
-
-		io_reset {
-			label = "io reset";
-			gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>;
-			output;
-			init-low;
-		};
-
-		io_test_radio {
-			label = "io test radio";
-			gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>;
-			output;
-			init-low;
-		};
-
-		io_boot_0 {
-			label = "io boot 0";
-			gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>;
-			output;
-			init-low;
-		};
-
-		io_boot_1 {
-			label = "io boot 1";
-			gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>;
-			output;
-			init-low;
-		};
-
-		verbose_bootloader {
-			label = "verbose bootloader";
-			gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
-			input;
-		};
-
-		 nail_bed_detection  {
-			label = "nail bed detection";
-			gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>;
-			input;
-		};
-
-		 id_usba {
-			label = "id usba";
-			gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
-			input;
-		};
-	};
-};
-
-&pioA {
-	pinctrl_key_gpio_default: key_gpio_default {
-		pinmux = <PIN_PA22__GPIO>,
-		<PIN_PA24__GPIO>,
-		<PIN_PA26__GPIO>,
-		<PIN_PA29__GPIO>,
-		<PIN_PA18__GPIO>;
-		bias-disable;
-		};
-
-	pinctrl_gpio {
-		pinctrl_pio_rf: gpio_rf {
-			pinmux = <PIN_PC19__GPIO>;
-			bias-disable;
-		};
-		pinctrl_pio_wifi: gpio_wifi {
-			pinmux = <PIN_PC20__GPIO>;
-			bias-disable;
-		};
-		pinctrl_pio_io_boot: gpio_io_boot {
-			pinmux =
-			<PIN_PC11__GPIO>,
-			<PIN_PC17__GPIO>;
-			bias-disable;
-		};
-		pinctrl_pio_io_test_radio: gpio_io_test_radio {
-			pinmux = <PIN_PC9__GPIO>;
-			bias-disable;
-		};
-		pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio {
-			pinmux = <PIN_PB21__GPIO>;
-			bias-disable;
-		};
-		pinctrl_pio_zbe_rst: gpio_zbe_rst {
-			pinmux = <PIN_PB25__GPIO>;
-			bias-disable;
-		};
-		/* stm32 reset must be open drain (internal pull up) */
-		pinctrl_pio_io_reset: gpio_io_reset {
-			pinmux = <PIN_PB30__GPIO>;
-			bias-disable;
-			drive-open-drain = <1>;
-			output-low;
-		};
-		pinctrl_pio_input: gpio_input {
-			pinmux =
-			<PIN_PB11__GPIO>,
-			<PIN_PB12__GPIO>,
-			<PIN_PC0__GPIO>;
-			bias-disable;
-		};
-	};
-
-	pinctrl_leds {
-		pinctrl_led_red: led_red {
-			pinmux = <PIN_PB1__GPIO>;
-			bias-disable;
-		};
-		pinctrl_led_white: led_white {
-			pinmux = <PIN_PB8__GPIO>;
-			bias-disable;
-		};
-	};
-};
-
-&adc {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&flx0 {
-	status = "okay";
-
-	uart5: serial@200  {
-			status = "okay";
-	};
-};
-
-&flx3 {
-	status = "okay";
-	uart8: serial@200 {
-		status = "okay";
-	};
-};
-
-&flx4 {
-	status = "okay";
-
-	i2c6: i2c@600 {
-		status = "okay";
-	};
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
deleted file mode 100644
index abe27adfa4d65..0000000000000
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ /dev/null
@@ -1,371 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3
- * family SoC boards
- *
- * Copyright (C) 2018 Overkiz SAS
- *
- * Authors: Dorian Rocipon <d.rocipon@overkiz.com>
- *          Kevin Carli <k.carli@overkiz.com>
- *          Mickael Gardet <m.gardet@overkiz.com>
- */
-/dts-v1/;
-#include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/mfd/atmel-flexcom.h>
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Overkiz Kizbox3";
-	compatible = "overkiz,kizbox3", "atmel,sama5d2", "atmel,sama5";
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart8;
-	};
-
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = "serial1:115200n8";
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	vdd_adc_vddana: supply_3v3_ana {
-		compatible = "regulator-fixed";
-		regulator-name = "adc-vddana";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vdd_adc_vref: supply_3v3_ref {
-		compatible = "regulator-fixed";
-		regulator-name = "adc-vref";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	led-controller-1 {
-		compatible = "pwm-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pwm0_pwm_h0
-			     &pinctrl_pwm0_pwm_h1
-			     &pinctrl_pwm0_pwm_h2
-			     &pinctrl_pwm0_pwm_h3>;
-		status = "disabled";
-
-		led-1 {
-			label = "pwm:red:user";
-			pwms = <&pwm0 0 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-			status = "disabled";
-		};
-
-		led-2 {
-			label = "pwm:green:user";
-			pwms = <&pwm0 1 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-			status = "disabled";
-		};
-
-		led-3 {
-			label = "pwm:blue:user";
-			pwms = <&pwm0 2 10000000 0>;
-			max-brightness = <255>;
-			status = "disabled";
-		};
-
-		led-4 {
-			label = "pwm:white:user";
-			pwms = <&pwm0 3 10000000 0>;
-			max-brightness = <255>;
-			status = "disabled";
-		};
-	};
-};
-
-&ebi {
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@3 {
-		pinctrl-0 = <&pinctrl_ebi_nand_addr>;
-		pinctrl-names = "default";
-		reg = <0x3 0x0 0x800000>;
-
-		atmel,rb = <0>;
-		nand-bus-width = <8>;
-		nand-ecc-mode = "hw";
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-on-flash-bbt;
-		label = "atmel_nand";
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			bootstrap@0 {
-				label = "bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			u-boot@20000 {
-				label = "u-boot";
-				reg = <0x20000 0x140000>;
-			};
-
-			u-boot-factory@160000 {
-				label = "u-boot-factory";
-				reg = <0x160000 0x140000>;
-			};
-
-			ubi@2A0000 {
-				label = "ubi";
-				reg = <0x2A0000 0x7D60000>;
-			};
-		};
-
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&pioA {
-	pinctrl_ebi_nand_addr: ebi-addr-1 {
-		pinmux = <PIN_PA0__D0>,
-			<PIN_PA1__D1>,
-			<PIN_PA2__D2>,
-			<PIN_PA3__D3>,
-			<PIN_PA4__D4>,
-			<PIN_PA5__D5>,
-			<PIN_PA6__D6>,
-			<PIN_PA7__D7>,
-			<PIN_PA8__NWE_NANDWE>,
-			<PIN_PA9__NCS3>,
-			<PIN_PA10__A21_NANDALE>,
-			<PIN_PA11__A22_NANDCLE>,
-			<PIN_PA21__NANDRDY>;
-		bias-disable;
-	};
-
-	pinctrl_usart {
-		pinctrl_usart_0: usart0-0 {
-			pinmux = < PIN_PB26__URXD0>, <PIN_PB27__UTXD0>;
-			bias-disable;
-		};
-		pinctrl_usart_1: usart1-0 {
-			pinmux = < PIN_PD2__URXD1>, <PIN_PD3__UTXD1>;
-			bias-disable;
-		};
-		pinctrl_usart_2: usart2-0 {
-			pinmux = < PIN_PD4__URXD2>, <PIN_PD5__UTXD2>;
-			bias-disable;
-		};
-		pinctrl_usart_3: usart3-0 {
-			pinmux = < PIN_PC12__URXD3>, <PIN_PC13__UTXD3>;
-			bias-disable;
-		};
-		pinctrl_usart_4: usart4-0 {
-			pinmux = < PIN_PB3__URXD4>, <PIN_PB4__UTXD4>;
-			bias-disable;
-		};
-		pinctrl_flx0_default: flx0_usart_default {
-			pinmux = <PIN_PB28__FLEXCOM0_IO0>, //TX
-			<PIN_PB29__FLEXCOM0_IO1>; //RX
-			bias-disable;
-		};
-		pinctrl_flx3_default: flx3_usart_default {
-			pinmux = <PIN_PB22__FLEXCOM3_IO1>, //RX
-			<PIN_PB23__FLEXCOM3_IO0>; //TX
-			bias-disable;
-		};
-	};
-
-	pinctrl_flx4_default: flx4_i2c6_default {
-		pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
-		<PIN_PD13__FLEXCOM4_IO1>; //CLK
-		bias-disable;
-		drive-open-drain = <1>;
-	};
-
-	pinctrl_pwm0 {
-		pinctrl_pwm0_pwm_h0: pwm0_pwm_h0 {
-			pinmux = <PIN_PA30__PWMH0>;
-			bias-disable;
-		};
-		pinctrl_pwm0_pwm_h1: pwm0_pwmh1 {
-			pinmux = <PIN_PB0__PWMH1>;
-			bias-disable;
-		};
-		pinctrl_pwm0_pwm_h2: pwm0_pwm_h2 {
-			pinmux = <PIN_PB5__PWMH2>;
-			bias-disable;
-		};
-		pinctrl_pwm0_pwm_h3: pwm0_pwm_h3 {
-			pinmux = <PIN_PB7__PWMH3>;
-			bias-disable;
-		};
-	};
-
-	pinctrl_adc {
-		pinctrl_adc2: adc2 {
-			pinmux = <PIN_PD21__GPIO>;
-			bias-disable;
-		};
-		pinctrl_adc3: adc3 {
-			pinmux = <PIN_PD22__GPIO>;
-			bias-disable;
-		};
-		pinctrl_adc4: adc4 {
-			pinmux = <PIN_PD23__GPIO>;
-			bias-disable;
-		};
-		pinctrl_adc5: adc5 {
-			pinmux = <PIN_PD24__GPIO>;
-			bias-disable;
-		};
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usart_0>;
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "disabled";
-};
-
-/* debug uart */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usart_1>;
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usart_2>;
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "disabled";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usart_3>;
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "disabled";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usart_4>;
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "disabled";
-};
-
-&flx0 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "disabled";
-
-	uart5: serial@200  {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx0_default>;
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		status = "disabled";
-	};
-};
-
-&flx3 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "disabled";
-
-	uart8: serial@200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx3_default>;
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		status = "disabled";
-	};
-};
-
-&flx4 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "disabled";
-
-	i2c6: i2c@600 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx4_default>;
-		status = "disabled";
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&shutdown_controller {
-	debounce-delay-us = <976>;
-	atmel,wakeup-rtc-timer;
-
-	input@0 {
-		reg = <0>;
-	};
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&adc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc2
-		     &pinctrl_adc3
-		     &pinctrl_adc4
-		     &pinctrl_adc5>;
-
-	vddana-supply = <&vdd_adc_vddana>;
-	vref-supply = <&vdd_adc_vref>;
-	status = "disabled";
-};
-
-&securam {
-	export;
-
-	/* export overkiz u-boot mode/version and factory */
-	uboot@1400 {
-		reg = <0x1400 0x20>;
-		export;
-	};
-};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-base.dts b/arch/arm/boot/dts/at91-kizboxmini-base.dts
deleted file mode 100644
index 81c29ca5cc1b7..0000000000000
--- a/arch/arm/boot/dts/at91-kizboxmini-base.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-kizboxmini-base.dts - Device Tree file for Overkiz Kizbox mini
- * base board
- *
- * Copyright (C) 2015 Overkiz SAS
- *   Author: Antoine Aubert <a.aubert@overkiz.com>
- *           Kévin Raymond <k.raymond@overkiz.com>
- */
-/dts-v1/;
-#include "at91-kizboxmini-common.dtsi"
-
-/ {
-	model = "Overkiz Kizbox Mini";
-	compatible = "overkiz,kizboxmini-base", "atmel,at91sam9g25",
-		     "atmel,at91sam9x5", "atmel,at91sam9";
-};
-
-&pinctrl_usart0 {
-	atmel,pins =
-		<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-		 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
-		 AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
-};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
deleted file mode 100644
index 42640fe6b6d04..0000000000000
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ /dev/null
@@ -1,168 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
- *
- * Copyright (C) 2014-2018 Overkiz SAS
- *   Author: Antoine Aubert <a.aubert@overkiz.com>
- *           Gaël Portay <g.portay@overkiz.com>
- *           Kévin Raymond <k.raymond@overkiz.com>
- *           Dorian Rocipon <d.rocipon@overkiz.com>
- */
-#include "at91sam9g25.dtsi"
-
-/ {
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = &dbgu;
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		adc_op_clk {
-			status = "disabled";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		key-prog {
-			label = "PB_PROG";
-			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-			wakeup-source;
-		};
-
-		key-reset {
-			label = "PB_RST";
-			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-
-	leds: led-controller-1 {
-		compatible = "pwm-leds";
-
-		led_blue: led-1 {
-			label = "pwm:blue:user";
-			pwms = <&pwm0 2 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "none";
-			status = "disabled";
-		};
-
-		led_green: led-2 {
-			label = "pwm:green:user";
-			pwms = <&pwm0 0 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		led_red: led-3 {
-			label = "pwm:red:user";
-			pwms = <&pwm0 1 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-};
-
-&usart0 {
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "okay";
-};
-
-&macb0 {
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_pwm0_1
-		     &pinctrl_pwm0_pwm1_1
-		     &pinctrl_pwm0_pwm2_1>;
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&adc0 {
-	status = "disabled";
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_addr_nand
-			&pinctrl_ebi_data_0_7>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-	pinctrl-0 = <&pinctrl_nand_oe_we
-		     &pinctrl_nand_cs
-		     &pinctrl_nand_rb>;
-	pinctrl-names = "default";
-
-	nand@3 {
-		reg = <0x3 0x0 0x800000>;
-		rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-		nand-bus-width = <8>;
-		nand-ecc-mode = "hw";
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-on-flash-bbt;
-		label = "atmel_nand";
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			bootstrap@0 {
-				label = "bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			ubi@20000 {
-				label = "ubi";
-				reg = <0x20000 0x7fe0000>;
-			};
-		};
-	};
-};
-
-&usb0 {
-	num-ports = <1>;
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
diff --git a/arch/arm/boot/dts/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/at91-kizboxmini-mb.dts
deleted file mode 100644
index c07d3076a9bc1..0000000000000
--- a/arch/arm/boot/dts/at91-kizboxmini-mb.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2015-2018 Overkiz SAS
- *   Author: Mickael Gardet <m.gardet@overkiz.com>
- *           Kévin Raymond <k.raymond@overkiz.com>
- */
-/dts-v1/;
-#include "at91-kizboxmini-common.dtsi"
-
-/ {
-	model = "Overkiz Kizbox Mini Mother Board";
-	compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25",
-		     "atmel,at91sam9x5", "atmel,at91sam9";
-};
-
-&usb0 {
-	num-ports = <2>;
-};
-
-&rtc {
-	status = "okay";
-};
-
-&led_blue {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-rd.dts b/arch/arm/boot/dts/at91-kizboxmini-rd.dts
deleted file mode 100644
index ab50f4d22387a..0000000000000
--- a/arch/arm/boot/dts/at91-kizboxmini-rd.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2015-2018 Overkiz SAS
- *   Author: Mickael Gardet <m.gardet@overkiz.com>
- *           Kévin Raymond <k.raymond@overkiz.com>
- */
-/dts-v1/;
-#include "at91-kizboxmini-common.dtsi"
-
-/ {
-	model = "Overkiz Kizbox Mini RailDIN";
-	compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25",
-		     "atmel,at91sam9x5", "atmel,at91sam9";
-
-	clocks {
-		adc_op_clk {
-			status = "okay";
-		};
-	};
-};
-
-&pinctrl {
-	adc0 {
-		pinctrl_adc0_ad5: adc0_ad5-0 {
-			/* pull-up disable */
-			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-};
-
-&usart0 {
-	status = "disabled";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&led_blue {
-	status = "okay";
-};
-
-&adc0 {
-	atmel,adc-vref = <2500>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_ad5>;
-	atmel,adc-channels-used = <0x0020>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi
deleted file mode 100644
index 533a440d5583e..0000000000000
--- a/arch/arm/boot/dts/at91-linea.dtsi
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-linea.dtsi - Device Tree Include file for the Axentia Linea Module.
- *
- * Copyright (C) 2017 Axentia Technologies AB
- *
- * Author: Peter Rosin <peda@axentia.se>
- */
-
-#include "sama5d31.dtsi"
-
-/ {
-	compatible = "axentia,linea",
-		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-};
-
-&slow_xtal {
-	clock-frequency = <32768>;
-};
-
-&main_xtal {
-	clock-frequency = <12000000>;
-};
-
-&tcb0 {
-	timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
-
-	timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "st,24c64", "atmel,24c64";
-		reg = <0x51>;
-		pagesize = <32>;
-	};
-};
-
-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-
-&nand_controller {
-	status = "okay";
-
-	nand: nand@3 {
-		reg = <0x3 0x0 0x2>;
-		atmel,rb = <0>;
-		nand-bus-width = <8>;
-		nand-ecc-mode = "hw";
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-on-flash-bbt;
-		label = "atmel_nand";
-	};
-};
diff --git a/arch/arm/boot/dts/at91-lmu5000.dts b/arch/arm/boot/dts/at91-lmu5000.dts
deleted file mode 100644
index f8863d7c07982..0000000000000
--- a/arch/arm/boot/dts/at91-lmu5000.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree file for CalAmp LMU5000 board
- *
- * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
- */
-
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-
-/ {
-	model = "CalAmp LMU5000";
-	compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
-	};
-
-	memory {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-	};
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&ebi {
-	status = "okay";
-
-	nand_controller: nand-controller {
-		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		nand@3 {
-			reg = <0x3 0x0 0x800000>;
-			rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-			cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			label = "atmel_nand";
-			status = "okay";
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				kernel@0 {
-					label = "kernel";
-					reg = <0x0 0x400000>;
-				};
-
-				rootfs@400000 {
-					label = "rootfs";
-					reg = <0x400000 0x3C00000>;
-				};
-
-				user1@4000000 {
-					label = "user1";
-					reg = <0x4000000 0x2000000>;
-				};
-
-				user2@6000000 {
-					label = "user2";
-					reg = <0x6000000 0x2000000>;
-				};
-			};
-		};
-	};
-};
-
-&macb0 {
-	phy-mode = "mii";
-	status = "okay";
-};
-
-&pinctrl {
-	board {
-		pinctrl_pck0_as_mck: pck0_as_mck {
-			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-		};
-	};
-
-	usb0 {
-		pinctrl_usb1_vbus_gpio: usb0_vbus_gpio {
-			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-};
-
-&ssc0 {
-	status = "okay";
-	pinctrl-0 = <&pinctrl_ssc0_tx>;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&usart0 {
-	pinctrl-0 =
-		<&pinctrl_usart0
-		 &pinctrl_usart0_rts
-		 &pinctrl_usart0_cts
-		 &pinctrl_usart0_dtr_dsr
-		 &pinctrl_usart0_dcd
-		 &pinctrl_usart0_ri>;
-	status = "okay";
-};
-
-&usart2 {
-	status = "okay";
-};
-
-&usb0 {
-	num-ports = <2>;
-	status = "okay";
-};
-
-&usb1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
-	atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-natte.dtsi b/arch/arm/boot/dts/at91-natte.dtsi
deleted file mode 100644
index 49f0a0c46cde4..0000000000000
--- a/arch/arm/boot/dts/at91-natte.dtsi
+++ /dev/null
@@ -1,244 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * at91-natte.dts - Device Tree include file for the Natte board
- *
- * Copyright (C) 2017 Axentia Technologies AB
- *
- * Author: Peter Rosin <peda@axentia.se>
- */
-
-/ {
-	mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>,
-			    <&ioexp 1 GPIO_ACTIVE_HIGH>,
-			    <&ioexp 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	batntc-mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 5>;
-		io-channel-names = "parent";
-		mux-controls = <&mux>;
-
-		channels =
-			"batntc0", "batntc1", "batntc2", "batntc3",
-			"batntc4", "batntc5", "batntc6", "batntc7";
-	};
-
-	batv-mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 6>;
-		io-channel-names = "parent";
-		mux-controls = <&mux>;
-
-		channels =
-			"batv0", "batv1", "batv2", "batv3",
-			"batv4", "batv5", "batv6", "batv7";
-	};
-
-	iout-mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 7>;
-		io-channel-names = "parent";
-		mux-controls = <&mux>;
-
-		channels =
-			"iout0", "iout1", "iout2", "iout3",
-			"iout4", "iout5", "iout6", "iout7";
-	};
-
-	i2c-mux {
-		compatible = "i2c-mux";
-		mux-locked;
-		i2c-parent = <&i2c0>;
-		mux-controls = <&mux>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			charger@9 {
-				compatible = "ti,bq24735";
-				reg = <0x9>;
-
-				ti,charge-current = <2000>;
-				ti,charge-voltage = <16800>;
-
-				poll-interval = <20000>;
-			};
-		};
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			charger@9 {
-				compatible = "ti,bq24735";
-				reg = <0x9>;
-
-				ti,charge-current = <2000>;
-				ti,charge-voltage = <16800>;
-
-				poll-interval = <20000>;
-			};
-		};
-
-		i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			charger@9 {
-				compatible = "ti,bq24735";
-				reg = <0x9>;
-
-				ti,charge-current = <2000>;
-				ti,charge-voltage = <16800>;
-
-				poll-interval = <20000>;
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			charger@9 {
-				compatible = "ti,bq24735";
-				reg = <0x9>;
-
-				ti,charge-current = <2000>;
-				ti,charge-voltage = <16800>;
-
-				poll-interval = <20000>;
-			};
-		};
-
-		i2c@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			charger@9 {
-				compatible = "ti,bq24735";
-				reg = <0x9>;
-
-				ti,charge-current = <2000>;
-				ti,charge-voltage = <16800>;
-
-				poll-interval = <20000>;
-			};
-		};
-
-		i2c@5 {
-			reg = <5>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			charger@9 {
-				compatible = "ti,bq24735";
-				reg = <0x9>;
-
-				ti,charge-current = <2000>;
-				ti,charge-voltage = <16800>;
-
-				poll-interval = <20000>;
-			};
-		};
-
-		i2c@6 {
-			reg = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			charger@9 {
-				compatible = "ti,bq24735";
-				reg = <0x9>;
-
-				ti,charge-current = <2000>;
-				ti,charge-voltage = <16800>;
-
-				poll-interval = <20000>;
-			};
-		};
-
-		i2c@7 {
-			reg = <7>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			charger@9 {
-				compatible = "ti,bq24735";
-				reg = <0x9>;
-
-				ti,charge-current = <2000>;
-				ti,charge-voltage = <16800>;
-
-				poll-interval = <20000>;
-			};
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	ioexp: ioexp@20 {
-		#gpio-cells = <2>;
-		compatible = "semtech,sx1502q";
-		reg = <0x20>;
-
-		gpio-controller;
-		ngpios = <8>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio3_cfg_pins>;
-
-		gpio3_cfg_pins: gpio3_cfg {
-			pins = "gpio3";
-			bias-pull-up;
-		};
-	};
-
-	adc: adc@48 {
-		compatible = "ti,ads1015";
-		reg = <0x48>;
-		#io-channel-cells = <1>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@4 {
-			reg = <4>;
-			ti,gain = <2>;
-			ti,datarate = <4>;
-		};
-
-		channel@5 {
-			reg = <5>;
-			ti,gain = <2>;
-			ti,datarate = <4>;
-		};
-
-		channel@6 {
-			reg = <6>;
-			ti,gain = <1>;
-			ti,datarate = <4>;
-		};
-
-		channel@7 {
-			reg = <7>;
-			ti,gain = <3>;
-			ti,datarate = <4>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
deleted file mode 100644
index f71377c9b757f..0000000000000
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ /dev/null
@@ -1,306 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board
- *
- * Copyright (C) 2017 Axentia Technologies AB
- *
- * Author: Peter Rosin <peda@axentia.se>
- */
-/dts-v1/;
-#include "at91-linea.dtsi"
-#include "at91-natte.dtsi"
-
-/ {
-	model = "Axentia Linea-Nattis v2 Natte v2";
-	compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
-		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-wakeup {
-			label = "Wakeup";
-			linux,code = <10>;
-			wakeup-source;
-			gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	panel_reg: panel-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "panel-VCC";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	bl_reg: backlight-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "panel-VDD";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	panel_bl: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 100000 0>;
-
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <40>;
-
-		power-supply = <&bl_reg>;
-		enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_blon>;
-	};
-
-	panel: panel {
-		compatible = "sharp,lq150x1lg11", "panel-lvds";
-
-		backlight = <&panel_bl>;
-		power-supply = <&panel_reg>;
-
-		width-mm = <304>;
-		height-mm = <228>;
-
-		data-mapping = "jeida-18";
-
-		panel-timing {
-			// 1024x768 @ 60Hz (typical)
-			clock-frequency = <50000000 65000000 80000000>;
-			hactive = <1024>;
-			vactive = <768>;
-			hfront-porch = <48 88 88>;
-			hback-porch = <96 168 168>;
-			hsync-len = <32 64 64>;
-			vsync-len = <3 13 74>;
-			vfront-porch = <3 13 74>;
-			vback-porch = <3 12 74>;
-		};
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&lvds_encoder_output>;
-			};
-		};
-	};
-
-	lvds-encoder {
-		compatible = "ti,ds90c185", "lvds-encoder";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_encoder_input: endpoint {
-					remote-endpoint = <&hlcdc_output>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds_encoder_output: endpoint {
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,name = "nattis-tfa9879";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&cpu_dai>;
-		simple-audio-card,frame-master = <&cpu_dai>;
-		simple-audio-card,widgets = "Line", "Line Out Jack";
-		simple-audio-card,routing = "Line Out Jack", "LINEOUT";
-
-		cpu_dai: simple-audio-card,cpu {
-			sound-dai = <&ssc0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&amp>;
-		};
-	};
-};
-
-&pinctrl {
-	nattis {
-		pinctrl_usba_vbus: usba_vbus {
-			atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO
-				      AT91_PINCTRL_DEGLITCH>;
-		};
-
-		pinctrl_mmc0_cd: mmc0_cd {
-			atmel,pins = <AT91_PIOD  5 AT91_PERIPH_GPIO
-				      AT91_PINCTRL_PULL_UP_DEGLITCH>;
-		};
-
-		pinctrl_lvds_prlud0: lvds_prlud0 {
-			atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO
-				      (AT91_PINCTRL_OUTPUT |
-				       AT91_PINCTRL_OUTPUT_VAL(0))>;
-		};
-
-		pinctrl_lvds_hipow0: lvds_hipow0 {
-			atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO
-				      (AT91_PINCTRL_OUTPUT |
-				       AT91_PINCTRL_OUTPUT_VAL(0))>;
-		};
-
-		pinctrl_blon: blon {
-			atmel,pins = <AT91_PIOA 20 AT91_PERIPH_GPIO
-				      (AT91_PINCTRL_OUTPUT |
-				       AT91_PINCTRL_OUTPUT_VAL(0))>;
-		};
-	};
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	clock-frequency = <100000>;
-
-	temp@18 {
-		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
-		reg = <0x18>;
-		smbus-timeout-disable;
-	};
-
-	eeprom@50 {
-		compatible = "nxp,se97b", "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	amp: amplifier@6c {
-		 compatible = "nxp,tfa9879";
-		 reg = <0x6c>;
-		 #sound-dai-cells = <0>;
-	};
-};
-
-&ssc0 {
-	status = "okay";
-
-	atmel,clk-from-rk-pin;
-	#sound-dai-cells = <0>;
-};
-
-&hlcdc {
-	status = "okay";
-
-	hlcdc-display-controller {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
-
-		port@0 {
-			hlcdc_output: endpoint {
-				remote-endpoint = <&lvds_encoder_input>;
-				bus-width = <16>;
-			};
-		};
-	};
-};
-
-&mmc0 {
-	status = "okay";
-
-	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
-		     &pinctrl_mmc0_dat1_3
-		     &pinctrl_mmc0_cd>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-		cd-inverted;
-	};
-};
-
-&usart0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usart0>;
-	atmel,use-dma-rx;
-};
-
-&nand {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		at91bootstrap@0 {
-			label = "at91bootstrap";
-			reg = <0x0 0x40000>;
-		};
-
-		barebox@40000 {
-			label = "barebox";
-			reg = <0x40000 0x60000>;
-		};
-
-		bareboxenv@c0000 {
-			label = "bareboxenv";
-			reg = <0xc0000 0x40000>;
-		};
-
-		bareboxenv2@100000 {
-			label = "bareboxenv2";
-			reg = <0x100000 0x40000>;
-		};
-
-		oftree@180000 {
-			label = "oftree";
-			reg = <0x180000 0x20000>;
-		};
-
-		kernel@200000 {
-			label = "kernel";
-			reg = <0x200000 0x500000>;
-		};
-
-		rootfs@800000 {
-			label = "rootfs";
-			reg = <0x800000 0x1f800000>;
-		};
-	};
-};
-
-&dbgu {
-	status = "okay";
-
-	atmel,use-dma-rx;
-};
-
-&usb0 {
-	status = "okay";
-
-	atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usba_vbus>;
-};
diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/at91-q5xr5.dts
deleted file mode 100644
index 9cf60b6f695c4..0000000000000
--- a/arch/arm/boot/dts/at91-q5xr5.dts
+++ /dev/null
@@ -1,181 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree file for Exegin Q5xR5 board
- *
- * Copyright (C) 2014 Owen Kirby <osk@exegin.com>
- */
-
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-
-/ {
-	model = "Exegin Q5x (rev5)";
-	compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2";
-	};
-
-	memory {
-		reg = <0x20000000 0x0>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&ebi {
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "cfi-flash";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x0 0x1000000 0x800000>;
-		bank-width = <2>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			kernel@0 {
-				label = "kernel";
-				reg = <0x0 0x200000>;
-			};
-
-			rootfs@200000 {
-				label = "rootfs";
-				reg = <0x200000 0x600000>;
-			};
-		};
-	};
-};
-
-&macb0 {
-	phy-mode = "mii";
-	status = "okay";
-};
-
-&pinctrl {
-	board {
-		pinctrl_pck0_as_mck: pck0_as_mck {
-			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-		};
-	};
-
-	spi0 {
-		pinctrl_spi0: spi0-0 {
-			atmel,pins =
-				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_spi0_npcs0: spi0_npcs0 {
-			atmel,pins = <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_spi0_npcs1: spi0_npcs1 {
-			atmel,pins = <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-		};
-	};
-
-	spi1 {
-		pinctrl_spi1: spi1-0 {
-			atmel,pins =
-				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_spi1_npcs0: spi1_npcs0 {
-			atmel,pins = <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_spi1_npcs1: spi1_npcs1 {
-			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-		};
-	};
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_npcs0 &pinctrl_spi0_npcs1>;
-	cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		at91boot@0 {
-			label = "at91boot";
-			reg = <0x0 0x4000>;
-		};
-
-		uenv@4000 {
-			label = "uboot-env";
-			reg = <0x4000 0x4000>;
-		};
-
-		uboot@8000 {
-			label = "uboot";
-			reg = <0x8000 0x3E000>;
-		};
-	};
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>;
-	cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>;
-	status = "okay";
-};
-
-&usart0 {
-	pinctrl-0 =
-		<&pinctrl_usart0
-		 &pinctrl_usart0_rts
-		 &pinctrl_usart0_cts
-		 &pinctrl_usart0_dtr_dsr
-		 &pinctrl_usart0_dcd
-		 &pinctrl_usart0_ri>;
-	status = "okay";
-};
-
-&usb0 {
-	num-ports = <2>;
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
deleted file mode 100644
index 9d26f99963483..0000000000000
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
- *
- * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-/dts-v1/;
-#include "at91sam9260.dtsi"
-/ {
-	model = "Calao QIL A9260";
-	compatible = "calao,qil-a9260", "atmel,at91sam9260", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			mmc0: mmc@fffa8000 {
-				pinctrl-0 = <
-					&pinctrl_mmc0_clk
-					&pinctrl_mmc0_slot0_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				pinctrl-names = "default";
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-				};
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 =
-					<&pinctrl_usart0
-					 &pinctrl_usart0_rts
-					 &pinctrl_usart0_cts
-					 &pinctrl_usart0_dtr_dsr
-					 &pinctrl_usart0_dcd
-					 &pinctrl_usart0_ri>;
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				pinctrl-0 =
-					<&pinctrl_usart1
-					 &pinctrl_usart1_rts
-					 &pinctrl_usart1_cts>;
-				status = "okay";
-			};
-
-			usart2: serial@fffb8000 {
-				pinctrl-0 =
-					<&pinctrl_usart2
-					 &pinctrl_usart2_rts
-					 &pinctrl_usart2_cts>;
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			spi0: spi@fffc8000 {
-				status = "okay";
-				cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>;
-
-				m41t94@0 {
-					compatible = "st,m41t94";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			shdwc@fffffd10 {
-				atmel,wakeup-counter = <10>;
-				atmel,wakeup-rtt-timer;
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						barebox@20000 {
-							label = "barebox";
-							reg = <0x20000 0x40000>;
-						};
-
-						bareboxenv@60000 {
-							label = "bareboxenv";
-							reg = <0x60000 0x20000>;
-						};
-
-						bareboxenv2@80000 {
-							label = "bareboxenv2";
-							reg = <0x80000 0x20000>;
-						};
-
-						oftree@a0000 {
-							label = "oftree";
-							reg = <0xa0000 0x20000>;
-						};
-
-						kernel@c0000 {
-							label = "kernel";
-							reg = <0xc0000 0x400000>;
-						};
-
-						rootfs@4c0000 {
-							label = "rootfs";
-							reg = <0x4c0000 0x7800000>;
-						};
-
-						data@7cc0000 {
-							label = "data";
-							reg = <0x7cc0000 0x8340000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led {
-			label = "user_led";
-			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-user {
-			label = "user_pb";
-			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
-			linux,code = <28>;
-			wakeup-source;
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
deleted file mode 100644
index 2fb51b9aca2ae..0000000000000
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board
- *
- *  Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com>
- */
-/dts-v1/;
-#include "at91sam9260.dtsi"
-
-/ {
-	model = "Olimex sam9-l9260";
-	compatible = "olimex,sam9-l9260", "atmel,at91sam9260", "atmel,at91sam9";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			mmc0: mmc@fffa8000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0
-					&pinctrl_mmc0_clk
-					&pinctrl_mmc0_slot1_cmd_dat0
-					&pinctrl_mmc0_slot1_dat1_3>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				slot@1 {
-					reg = <1>;
-					bus-width = <4>;
-					cd-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
-					wp-gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			macb0: ethernet@fffc4000 {
-				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>;
-				phy-mode = "mii";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "okay";
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-				};
-			};
-
-			spi0: spi@fffc8000 {
-				cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
-				status = "okay";
-
-				flash@0 {
-					compatible = "atmel,at45", "atmel,dataflash";
-					spi-max-frequency = <15000000>;
-					reg = <0>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				mmc0 {
-					pinctrl_board_mmc0: mmc0-board {
-						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* CD pin */
-							 AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* WP pin */
-					};
-				};
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-		};
-
-		usb0: ohci@500000 {
-			status = "okay";
-		};
-
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pwr_led {
-			label = "sam9-l9260:yellow:pwr";
-			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-		};
-
-		status_led {
-			label = "sam9-l9260:green:status";
-			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/at91-sam9x60_curiosity.dts
deleted file mode 100644
index cb86a3a170ce1..0000000000000
--- a/arch/arm/boot/dts/at91-sam9x60_curiosity.dts
+++ /dev/null
@@ -1,503 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sam9x60_curiosity.dts - Device Tree file for Microchip SAM9X60 Curiosity board
- *
- * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
- *
- * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
- */
-/dts-v1/;
-#include "sam9x60.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Microchip SAM9X60 Curiosity";
-	compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c6;
-		serial2 = &uart7;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio_default>;
-
-		button-user {
-			label = "PB_USER";
-			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led-red {
-			label = "red";
-			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-green {
-			label = "green";
-			gpios = <&pioD 19 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-blue {
-			label = "blue";
-			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-
-	vdd_1v8: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <1800000>;
-		regulator-min-microvolt = <1800000>;
-		regulator-name = "VDD_1V8";
-	};
-
-	vdd_1v15: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <1150000>;
-		regulator-min-microvolt = <1150000>;
-		regulator-name = "VDD_1V15";
-	};
-
-	vdd1_3v3: regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "VDD1_3V3";
-	};
-};
-
-&adc {
-	vddana-supply = <&vdd1_3v3>;
-	vref-supply = <&vdd1_3v3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
-	status = "okay";
-};
-
-&can0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can0_rx_tx>;
-	status = "disabled"; /* Conflict with dbgu. */
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1_rx_tx>;
-	status = "okay";
-};
-
-&dbgu {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_dbgu>;
-	status = "okay"; /* Conflict with can0. */
-};
-
-&ebi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_lsb>;
-	status = "okay";
-
-	nand_controller: nand-controller {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
-		status = "okay";
-
-		nand@3 {
-			reg = <0x3 0x0 0x800000>;
-			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <8>;
-			nand-ecc-step-size = <512>;
-			nand-on-flash-bbt;
-			label = "atmel_nand";
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				at91bootstrap@0 {
-					label = "at91bootstrap";
-					reg = <0x0 0x40000>;
-				};
-
-				uboot@40000 {
-					label = "u-boot";
-					reg = <0x40000 0xc0000>;
-				};
-
-				ubootenvred@100000 {
-					label = "U-Boot Env Redundant";
-					reg = <0x100000 0x40000>;
-				};
-
-				ubootenv@140000 {
-					label = "U-Boot Env";
-					reg = <0x140000 0x40000>;
-				};
-
-				dtb@180000 {
-					label = "device tree";
-					reg = <0x180000 0x80000>;
-				};
-
-				kernel@200000 {
-					label = "kernel";
-					reg = <0x200000 0x600000>;
-				};
-
-				rootfs@800000 {
-					label = "rootfs";
-					reg = <0x800000 0x1f800000>;
-				};
-			};
-		};
-	};
-};
-
-&flx0 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c0: i2c@600 {
-		dmas = <0>, <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx0_default>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-analog-filter;
-		i2c-digital-filter;
-		i2c-digital-filter-width-ns = <35>;
-		status = "okay";
-
-		eeprom@53 {
-			compatible = "atmel,24c02";
-			reg = <0x53>;
-			pagesize = <16>;
-		};
-	};
-};
-
-&flx6 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c6: i2c@600 {
-		dmas = <0>, <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx6_default>;
-		i2c-analog-filter;
-		i2c-digital-filter;
-		i2c-digital-filter-width-ns = <35>;
-		status = "disabled";
-	};
-};
-
-&flx7 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	uart7: serial@200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx7_default>;
-		status = "okay";
-	};
-};
-
-&macb0 {
-	phy-mode = "rmii";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_macb0_rmii>;
-	status = "okay";
-
-	ethernet-phy@0 {
-		reg = <0x0>;
-	};
-};
-
-&pinctrl {
-	adc {
-		pinctrl_adc_default: adc-default {
-			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_adtrg_default: adtrg-default {
-			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
-		};
-	};
-
-	can0 {
-		pinctrl_can0_rx_tx: can0-rx-tx {
-			atmel,pins =
-				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
-				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
-				 AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
-		};
-	};
-
-	can1 {
-		pinctrl_can1_rx_tx: can1-rx-tx {
-			atmel,pins =
-				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 */
-				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 */
-				 AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
-		};
-	};
-
-	dbgu {
-		pinctrl_dbgu: dbgu-0 {
-			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-		};
-	};
-
-	ebi {
-		pinctrl_ebi_data_lsb: ebi-data-lsb {
-			atmel,pins =
-				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
-		};
-
-		pinctrl_ebi_addr_nand: ebi-addr-nand {
-			atmel,pins =
-				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
-		};
-	};
-
-	flexcom {
-		pinctrl_flx0_default: flx0-twi {
-			atmel,pins =
-				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-		};
-
-		pinctrl_flx6_default: flx6-twi {
-			atmel,pins =
-				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-		};
-
-		pinctrl_flx7_default: flx7-usart {
-			atmel,pins =
-				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
-				 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-		};
-	};
-
-	gpio-keys {
-		pinctrl_key_gpio_default: pinctrl-key-gpio {
-			atmel,pins = <AT91_PIOA 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-
-	leds {
-		pinctrl_gpio_leds: gpio-leds {
-			atmel,pins = <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-				      AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-				      AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-
-	macb0 {
-		pinctrl_macb0_rmii: macb0-rmii-0 {
-			atmel,pins =
-				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
-				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
-				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
-				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
-				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
-				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
-				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
-				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
-				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
-				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
-		};
-	};
-
-	nand {
-		pinctrl_nand_oe_we: nand-oe-we-0 {
-			atmel,pins =
-				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
-		};
-
-		pinctrl_nand_rb: nand-rb-0 {
-			atmel,pins =
-				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-		};
-
-		pinctrl_nand_cs: nand-cs-0 {
-			atmel,pins =
-				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-		};
-	};
-
-	pwm0 {
-		pinctrl_pwm0_0: pwm0-0 {
-			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_pwm0_1: pwm0-1 {
-			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_pwm0_2: pwm0-2 {
-			atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-		};
-	};
-
-	sdmmc0 {
-		pinctrl_sdmmc0_default: sdmmc0 {
-			atmel,pins =
-				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
-				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
-				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
-				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
-				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
-				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
-		};
-
-		pinctrl_sdmmc0_cd: sdmmc0-cd {
-			atmel,pins =
-				<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-
-	sdmmc1 {
-		pinctrl_sdmmc1_default: sdmmc1 {
-			atmel,pins =
-				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
-				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
-				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
-				 AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
-				 AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
-				 AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
-		};
-	};
-
-	usb0 {
-		pinctrl_usba_vbus: usba-vbus {
-			atmel,pins = <AT91_PIOA 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-
-	usb1 {
-		pinctrl_usb_default: usb-default {
-			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-				      AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-}; /* pinctrl */
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2>;
-	status = "okay";
-};
-
-&sdmmc0 {
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
-	cd-gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	status = "okay";
-};
-
-&sdmmc1 {
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc1_default>;
-	disable-wp;
-	status = "okay";
-};
-
-&shutdown_controller {
-	debounce-delay-us = <976>;
-	status = "okay";
-
-	input@0 {
-		reg = <0>;
-	};
-};
-
-&tcb0 {
-	timer0: timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
-
-	timer1: timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
-};
-
-&usb0 {
-	atmel,vbus-gpio = <&pioA 27 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usba_vbus>;
-	status = "okay";
-};
-
-&usb1 {
-	num-ports = <3>;
-	atmel,vbus-gpio = <0
-			   &pioD 18 GPIO_ACTIVE_HIGH
-			   &pioD 15 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_default>;
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
deleted file mode 100644
index 5cd593028aff7..0000000000000
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ /dev/null
@@ -1,669 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board
- *
- * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
- *
- * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
- */
-/dts-v1/;
-#include "sam9x60.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Microchip SAM9X60-EK";
-	compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9";
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c6;
-		serial1 = &uart5;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio_default>;
-
-		button-1 {
-			label = "SW1";
-			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-		status = "okay"; /* Conflict with pwm0. */
-
-		red {
-			label = "red";
-			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		green {
-			label = "green";
-			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		blue {
-			label = "blue";
-			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	vdd_1v8: fixed-regulator-vdd_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	vdd_1v15: fixed-regulator-vdd_1v15 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_1V15";
-		regulator-min-microvolt = <1150000>;
-		regulator-max-microvolt = <1150000>;
-		regulator-always-on;
-	};
-
-	vdd1_3v3: fixed-regulator-vdd1_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD1_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vdd2_3v3: regulator-fixed-vdd2_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD2_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&adc {
-	vddana-supply = <&vdd1_3v3>;
-	vref-supply = <&vdd1_3v3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
-	status = "okay";
-};
-
-&can0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can0_rx_tx>;
-	status = "disabled"; /* Conflict with dbgu. */
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1_rx_tx>;
-	status = "okay";
-};
-
-&classd {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_classd_default>;
-	atmel,pwm-type = "diff";
-	atmel,non-overlap-time = <10>;
-	status = "okay";
-};
-
-&dbgu {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_dbgu>;
-	status = "okay"; /* Conflict with can0. */
-};
-
-&ebi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
-	status = "okay";
-
-	nand_controller: nand-controller {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
-		status = "okay";
-
-		nand@3 {
-			reg = <0x3 0x0 0x800000>;
-			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <8>;
-			nand-ecc-step-size = <512>;
-			nand-on-flash-bbt;
-			label = "atmel_nand";
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				at91bootstrap@0 {
-					label = "at91bootstrap";
-					reg = <0x0 0x40000>;
-				};
-
-				uboot@40000 {
-					label = "u-boot";
-					reg = <0x40000 0xc0000>;
-				};
-
-				ubootenvred@100000 {
-					label = "U-Boot Env Redundant";
-					reg = <0x100000 0x40000>;
-				};
-
-				ubootenv@140000 {
-					label = "U-Boot Env";
-					reg = <0x140000 0x40000>;
-				};
-
-				dtb@180000 {
-					label = "device tree";
-					reg = <0x180000 0x80000>;
-				};
-
-				kernel@200000 {
-					label = "kernel";
-					reg = <0x200000 0x600000>;
-				};
-
-				rootfs@800000 {
-					label = "rootfs";
-					reg = <0x800000 0x1f800000>;
-				};
-			};
-		};
-	};
-};
-
-&flx0 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c0: i2c@600 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		dmas = <0>, <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx0_default>;
-		i2c-analog-filter;
-		i2c-digital-filter;
-		i2c-digital-filter-width-ns = <35>;
-		status = "okay";
-
-		eeprom@53 {
-			compatible = "atmel,24c02";
-			reg = <0x53>;
-			pagesize = <16>;
-			status = "okay";
-		};
-	};
-};
-
-&flx4 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
-	status = "disabled";
-
-	spi4: spi@400 {
-		dmas = <0>, <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx4_default>;
-		status = "disabled";
-	};
-};
-
-&flx5 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	uart5: serial@200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx5_default>;
-		status = "okay";
-	};
-};
-
-&flx6 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c6: i2c@600 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		dmas = <0>, <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx6_default>;
-		i2c-analog-filter;
-		i2c-digital-filter;
-		i2c-digital-filter-width-ns = <35>;
-		status = "okay";
-
-		gpio_exp: mcp23008@20 {
-			compatible = "microchip,mcp23008";
-			reg = <0x20>;
-		};
-	};
-};
-
-&gpbr {
-	status = "okay";
-};
-
-&i2s {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2s_default>;
-	#sound-dai-cells = <0>;
-	status = "disabled"; /* Conflict with QSPI. */
-};
-
-&macb0 {
-	phy-mode = "rmii";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_macb0_rmii>;
-	status = "okay";
-
-	ethernet-phy@0 {
-		reg = <0x0>;
-	};
-};
-
-&pinctrl {
-	adc {
-		pinctrl_adc_default: adc_default {
-			atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_adtrg_default: adtrg_default {
-			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
-		};
-	};
-
-	dbgu {
-		pinctrl_dbgu: dbgu-0 {
-			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-		};
-	};
-
-	i2s {
-		pinctrl_i2s_default: i2s {
-			atmel,pins =
-				<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SCK */
-				 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SWS */
-				 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDIN */
-				 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDOUT */
-				 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* I2SMCK */
-		};
-	};
-
-	qspi {
-		pinctrl_qspi: qspi {
-			atmel,pins =
-				<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
-				 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
-				 AT91_PIOB 21 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOB 22 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOB 23 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOB 24 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)>;
-		};
-	};
-
-	nand {
-		pinctrl_nand_oe_we: nand-oe-we-0 {
-			atmel,pins =
-				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
-		};
-
-		pinctrl_nand_rb: nand-rb-0 {
-			atmel,pins =
-				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-		};
-
-		pinctrl_nand_cs: nand-cs-0 {
-			atmel,pins =
-				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-		};
-	};
-
-	ebi {
-		pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
-			atmel,pins =
-				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
-		};
-
-		pinctrl_ebi_data_0_15: ebi-data-msb-0 {
-			atmel,pins =
-				<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_ebi_addr_nand: ebi-addr-0 {
-			atmel,pins =
-				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
-				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
-		};
-	};
-
-	flexcom {
-		pinctrl_flx0_default: flx0_twi {
-			atmel,pins =
-				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-		};
-
-		pinctrl_flx4_default: flx4_spi {
-			atmel,pins =
-				<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
-				 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_flx5_default: flx5_uart {
-			atmel,pins =
-				<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
-				 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
-				 AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE
-				 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_flx6_default: flx6_twi {
-			atmel,pins =
-				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-		};
-	};
-
-	classd {
-		pinctrl_classd_default: classd {
-			atmel,pins =
-				<AT91_PIOA 24 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
-				 AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN
-				 AT91_PIOA 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
-				 AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>;
-		};
-	};
-
-	can0 {
-		pinctrl_can0_rx_tx: can0_rx_tx {
-			atmel,pins =
-				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
-				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
-				 AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN0 mux */
-				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
-		};
-	};
-
-	can1 {
-		pinctrl_can1_rx_tx: can1_rx_tx {
-			atmel,pins =
-				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 RXD1 */
-				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 TXD1 */
-				 AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN1 mux */
-				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
-		};
-	};
-
-	macb0 {
-		pinctrl_macb0_rmii: macb0_rmii-0 {
-			atmel,pins =
-				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
-				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
-				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
-				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
-				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
-				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
-				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
-				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
-				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
-				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
-		};
-	};
-
-	pwm0 {
-		pinctrl_pwm0_0: pwm0_0 {
-			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_pwm0_1: pwm0_1 {
-			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_pwm0_2: pwm0_2 {
-			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_pwm0_3: pwm0_3 {
-			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-		};
-	};
-
-	sdmmc0 {
-		pinctrl_sdmmc0_default: sdmmc0 {
-			atmel,pins =
-				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
-				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
-				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
-				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
-				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
-				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
-		};
-		pinctrl_sdmmc0_cd: sdmmc0_cd {
-			atmel,pins =
-				<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-
-	sdmmc1 {
-		pinctrl_sdmmc1_default: sdmmc1 {
-			atmel,pins =
-				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
-				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
-				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
-				 AT91_PIOA  2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
-				 AT91_PIOA  3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
-				 AT91_PIOA  4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
-		};
-	};
-
-	gpio_keys {
-		pinctrl_key_gpio_default: pinctrl_key_gpio {
-			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-
-	usb0 {
-		pinctrl_usba_vbus: usba_vbus {
-			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-
-	usb1 {
-		pinctrl_usb_default: usb_default {
-			atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-				      AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-
-	leds {
-		pinctrl_gpio_leds: gpio_leds {
-			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-				      AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-				      AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-}; /* pinctrl */
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>;
-	status = "disabled"; /* Conflict with leds. */
-};
-
-&sdmmc0 {
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
-	status = "okay";
-	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
-	disable-wp;
-};
-
-&sdmmc1 {
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc1_default>;
-	no-1-8-v;
-	non-removable;
-	status = "disabled"; /* Conflict with flx4. */
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi>;
-	status = "okay"; /* Conflict with i2s. */
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-		spi-cs-setup-ns = <7>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		m25p,fast-read;
-
-		at91bootstrap@0 {
-			label = "qspi: at91bootstrap";
-			reg = <0x0 0x40000>;
-		};
-
-		bootloader@40000 {
-			label = "qspi: bootloader";
-			reg = <0x40000 0xc0000>;
-		};
-
-		bootloaderenvred@100000 {
-			label = "qspi: bootloader env redundant";
-			reg = <0x100000 0x40000>;
-		};
-
-		bootloaderenv@140000 {
-			label = "qspi: bootloader env";
-			reg = <0x140000 0x40000>;
-		};
-
-		dtb@180000 {
-			label = "qspi: device tree";
-			reg = <0x180000 0x80000>;
-		};
-
-		kernel@200000 {
-			label = "qspi: kernel";
-			reg = <0x200000 0x600000>;
-		};
-	};
-};
-
-&rtt {
-	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-	status = "okay";
-};
-
-&shutdown_controller {
-	debounce-delay-us = <976>;
-	status = "okay";
-
-	input@0 {
-		reg = <0>;
-	};
-};
-
-&tcb0 {
-	timer0: timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
-
-	timer1: timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
-};
-
-&usb0 {
-	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usba_vbus>;
-	status = "okay";
-};
-
-&usb1 {
-	num-ports = <3>;
-	atmel,vbus-gpio = <0
-			   &pioD 15 GPIO_ACTIVE_HIGH
-			   &pioD 16 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_default>;
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
-
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
deleted file mode 100644
index 95ecb7d040a88..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
- *
- *  Copyright (c) 2017, Microchip Technology Inc.
- *                2017 Cristian Birsan <cristian.birsan@microchip.com>
- *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
- */
-#include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Atmel SAMA5D27 SoM1";
-	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
-
-	aliases {
-		i2c0 = &i2c0;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <24000000>;
-		};
-	};
-
-	ahb {
-		sdmmc0: sdio-host@a0000000 {
-			microchip,sdcal-inverted;
-		};
-
-		apb {
-			qspi1: spi@f0024000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_qspi1_default>;
-
-				flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "jedec,spi-nor";
-					reg = <0>;
-					spi-max-frequency = <104000000>;
-					spi-cs-setup-ns = <7>;
-					spi-tx-bus-width = <4>;
-					spi-rx-bus-width = <4>;
-					m25p,fast-read;
-
-					at91bootstrap@0 {
-						label = "at91bootstrap";
-						reg = <0x00000000 0x00040000>;
-					};
-
-					bootloader@40000 {
-						label = "bootloader";
-						reg = <0x00040000 0x000c0000>;
-					};
-
-					bootloaderenvred@100000 {
-						label = "bootloader env redundant";
-						reg = <0x00100000 0x00040000>;
-					};
-
-					bootloaderenv@140000 {
-						label = "bootloader env";
-						reg = <0x00140000 0x00040000>;
-					};
-
-					dtb@180000 {
-						label = "device tree";
-						reg = <0x00180000 0x00080000>;
-					};
-
-					kernel@200000 {
-						label = "kernel";
-						reg = <0x00200000 0x00600000>;
-					};
-				};
-			};
-
-			macb0: ethernet@f8008000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_default>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				phy-mode = "rmii";
-
-				ethernet-phy@7 {
-					reg = <0x7>;
-					interrupt-parent = <&pioA>;
-					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_macb0_phy_irq>;
-				};
-			};
-
-			i2c0: i2c@f8028000 {
-				dmas = <0>, <0>;
-				pinctrl-names = "default", "gpio";
-				pinctrl-0 = <&pinctrl_i2c0_default>;
-				pinctrl-1 = <&pinctrl_i2c0_gpio>;
-				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-				status = "okay";
-
-				at24@50 {
-					compatible = "atmel,24c02";
-					reg = <0x50>;
-					pagesize = <8>;
-				};
-			};
-
-			pinctrl@fc038000 {
-				pinctrl_i2c0_default: i2c0_default {
-					pinmux = <PIN_PD21__TWD0>,
-						 <PIN_PD22__TWCK0>;
-					bias-disable;
-				};
-
-				pinctrl_i2c0_gpio: i2c0_gpio {
-					pinmux = <PIN_PD21__GPIO>,
-						 <PIN_PD22__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_qspi1_default: qspi1_default {
-					sck_cs {
-						pinmux = <PIN_PB5__QSPI1_SCK>,
-							 <PIN_PB6__QSPI1_CS>;
-						bias-disable;
-					};
-
-					data {
-						pinmux = <PIN_PB7__QSPI1_IO0>,
-							 <PIN_PB8__QSPI1_IO1>,
-							 <PIN_PB9__QSPI1_IO2>,
-							 <PIN_PB10__QSPI1_IO3>;
-						bias-pull-up;
-					};
-				};
-
-				pinctrl_macb0_default: macb0_default {
-					pinmux = <PIN_PD9__GTXCK>,
-						 <PIN_PD10__GTXEN>,
-						 <PIN_PD11__GRXDV>,
-						 <PIN_PD12__GRXER>,
-						 <PIN_PD13__GRX0>,
-						 <PIN_PD14__GRX1>,
-						 <PIN_PD15__GTX0>,
-						 <PIN_PD16__GTX1>,
-						 <PIN_PD17__GMDC>,
-						 <PIN_PD18__GMDIO>;
-					bias-disable;
-				};
-
-				pinctrl_macb0_phy_irq: macb0_phy_irq {
-					pinmux = <PIN_PD31__GPIO>;
-					bias-disable;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
deleted file mode 100644
index 52ddd0571f1c0..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ /dev/null
@@ -1,552 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
- *
- *  Copyright (c) 2017, Microchip Technology Inc.
- *                2016 Nicolas Ferre <nicolas.ferre@atmel.com>
- *                2017 Cristian Birsan <cristian.birsan@microchip.com>
- *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
- */
-/dts-v1/;
-#include "at91-sama5d27_som1.dtsi"
-#include <dt-bindings/mfd/atmel-flexcom.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Atmel SAMA5D27 SOM1 EK";
-	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
-
-	aliases {
-		serial0 = &uart1;	/* DBGU */
-		serial1 = &uart4;	/* mikro BUS 1 */
-		serial2 = &uart2;	/* mikro BUS 2 */
-		i2c1 = &i2c1;
-		i2c2 = &i2c3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	ahb {
-		usb0: gadget@300000 {
-			atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-
-		usb1: ohci@400000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
-					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
-					   0
-					  >;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_default>;
-			status = "okay";
-		};
-
-		usb2: ehci@500000 {
-			status = "okay";
-		};
-
-		sdmmc0: sdio-host@a0000000 {
-			bus-width = <8>;
-			mmc-ddr-3_3v;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_sdmmc0_default>;
-			status = "okay";
-		};
-
-		sdmmc1: sdio-host@b0000000 {
-			bus-width = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_sdmmc1_default>;
-			status = "okay";
-		};
-
-		apb {
-			isc: isc@f0008000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
-			};
-
-			qspi1: spi@f0024000 {
-				status = "okay";
-			};
-
-			spi0: spi@f8000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_default>;
-				status = "okay";
-			};
-
-			macb0: ethernet@f8008000 {
-				status = "okay";
-			};
-
-			tcb0: timer@f800c000 {
-				timer0: timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer1: timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			uart1: serial@f8020000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1_default>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "okay";
-			};
-
-			uart2: serial@f8024000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mikrobus2_uart>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "okay";
-			};
-
-			pwm0: pwm@f802c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
-				status = "disabled"; /* Conflict with leds. */
-			};
-
-			flx1: flexcom@f8038000 {
-				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-				status = "okay";
-
-				i2c3: i2c@600 {
-					dmas = <0>, <0>;
-					i2c-analog-filter;
-					i2c-digital-filter;
-					i2c-digital-filter-width-ns = <35>;
-					pinctrl-names = "default", "gpio";
-					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
-					pinctrl-1 = <&pinctrl_i2c3_gpio>;
-					sda-gpios = <&pioA PIN_PA24 GPIO_ACTIVE_HIGH>;
-					scl-gpios = <&pioA PIN_PA23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-					status = "okay";
-				};
-			};
-
-			shdwc@f8048010 {
-				debounce-delay-us = <976>;
-				atmel,wakeup-rtc-timer;
-
-				input@0 {
-					reg = <0>;
-				};
-			};
-
-			watchdog@f8048040 {
-				status = "okay";
-			};
-
-			uart3: serial@fc008000 {
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart3_default>;
-				status = "disabled"; /* Conflict with isc. */
-			};
-
-			uart4: serial@fc00c000 {
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
-				status = "okay";
-			};
-
-			flx3: flexcom@fc014000 {
-				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
-				status = "disabled";
-
-				uart8: serial@200 {
-					dmas = <0>, <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_flx3_default>;
-					status = "disabled"; /* Conflict with isc. */
-				};
-
-				spi5: spi@400 {
-					dmas = <0>, <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_flx3_default>;
-					status = "disabled"; /* Conflict with isc. */
-				};
-			};
-
-			flx4: flexcom@fc018000 {
-				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
-				status = "okay";
-
-				uart9: serial@200 {
-					dmas = <0>, <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_flx4_default>;
-					status = "disabled"; /* Conflict with spi6 and i2c6. */
-				};
-
-				spi6: spi@400 {
-					dmas = <0>, <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
-					status = "okay"; /* Conflict with uart5 and i2c6. */
-				};
-
-				i2c6: i2c@600 {
-					dmas = <0>, <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_flx4_default>;
-					status = "disabled"; /* Conflict with uart5 and spi6. */
-				};
-			};
-
-			i2c1: i2c@fc028000 {
-				dmas = <0>, <0>;
-				i2c-analog-filter;
-				i2c-digital-filter;
-				i2c-digital-filter-width-ns = <35>;
-				pinctrl-names = "default", "gpio";
-				pinctrl-0 = <&pinctrl_i2c1_default>;
-				pinctrl-1 = <&pinctrl_i2c1_gpio>;
-				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-				status = "okay";
-			};
-
-			adc: adc@fc030000 {
-				vddana-supply = <&vddana>;
-				vref-supply = <&advref>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mikrobus1_an &pinctrl_mikrobus2_an>;
-
-				status = "okay";
-			};
-
-			pinctrl@fc038000 {
-
-				pinctrl_can1_default: can1_default {
-					pinmux = <PIN_PC26__CANTX1>,
-						 <PIN_PC27__CANRX1>;
-					bias-disable;
-				};
-
-				pinctrl_flx3_default: flx3_default {
-					pinmux = <PIN_PC20__FLEXCOM3_IO0>,
-						 <PIN_PC19__FLEXCOM3_IO1>,
-						 <PIN_PC18__FLEXCOM3_IO2>,
-						 <PIN_PC21__FLEXCOM3_IO3>,
-						 <PIN_PC22__FLEXCOM3_IO4>;
-					bias-disable;
-				};
-
-				pinctrl_i2c1_default: i2c1_default {
-					pinmux = <PIN_PD4__TWD1>,
-						 <PIN_PD5__TWCK1>;
-					bias-disable;
-				};
-
-				pinctrl_i2c1_gpio: i2c1_gpio {
-                                        pinmux = <PIN_PD4__GPIO>,
-                                                 <PIN_PD5__GPIO>;
-                                        bias-disable;
-                                };
-
-
-				pinctrl_isc_base: isc_base {
-					pinmux = <PIN_PC21__ISC_PCK>,
-						 <PIN_PC22__ISC_VSYNC>,
-						 <PIN_PC23__ISC_HSYNC>,
-						 <PIN_PC24__ISC_MCK>;
-					bias-disable;
-				};
-
-				pinctrl_isc_data_8bit: isc_data_8bit {
-					pinmux = <PIN_PC20__ISC_D11>,
-						 <PIN_PC19__ISC_D10>,
-						 <PIN_PC18__ISC_D9>,
-						 <PIN_PC17__ISC_D8>,
-						 <PIN_PC16__ISC_D7>,
-						 <PIN_PC15__ISC_D6>,
-						 <PIN_PC14__ISC_D5>,
-						 <PIN_PC13__ISC_D4>;
-					bias-disable;
-				};
-
-				pinctrl_isc_data_9_10: isc_data_9_10 {
-					pinmux = <PIN_PC12__ISC_D3>,
-						 <PIN_PC11__ISC_D2>;
-					bias-disable;
-				};
-
-				pinctrl_isc_data_11_12: isc_data_11_12 {
-					pinmux = <PIN_PC10__ISC_D1>,
-						 <PIN_PC9__ISC_D0>;
-					bias-disable;
-				};
-
-				pinctrl_key_gpio_default: key_gpio_default {
-					pinmux = <PIN_PA29__GPIO>;
-					bias-pull-up;
-				};
-
-				pinctrl_led_gpio_default: led_gpio_default {
-					pinmux = <PIN_PA10__GPIO>,
-						 <PIN_PB1__GPIO>,
-						 <PIN_PA31__GPIO>;
-					bias-pull-up;
-				};
-
-				pinctrl_sdmmc0_default: sdmmc0_default {
-					cmd_data {
-						pinmux = <PIN_PA1__SDMMC0_CMD>,
-							 <PIN_PA2__SDMMC0_DAT0>,
-							 <PIN_PA3__SDMMC0_DAT1>,
-							 <PIN_PA4__SDMMC0_DAT2>,
-							 <PIN_PA5__SDMMC0_DAT3>,
-							 <PIN_PA6__SDMMC0_DAT4>,
-							 <PIN_PA7__SDMMC0_DAT5>,
-							 <PIN_PA8__SDMMC0_DAT6>,
-							 <PIN_PA9__SDMMC0_DAT7>;
-						bias-disable;
-					};
-
-					ck_cd_vddsel {
-						pinmux = <PIN_PA0__SDMMC0_CK>,
-							 <PIN_PA11__SDMMC0_VDDSEL>,
-							 <PIN_PA13__SDMMC0_CD>;
-						bias-disable;
-					};
-				};
-
-				pinctrl_sdmmc1_default: sdmmc1_default {
-					cmd_data {
-						pinmux = <PIN_PA28__SDMMC1_CMD>,
-							 <PIN_PA18__SDMMC1_DAT0>,
-							 <PIN_PA19__SDMMC1_DAT1>,
-							 <PIN_PA20__SDMMC1_DAT2>,
-							 <PIN_PA21__SDMMC1_DAT3>;
-						bias-disable;
-					};
-
-					conf-ck_cd {
-						pinmux = <PIN_PA22__SDMMC1_CK>,
-							 <PIN_PA30__SDMMC1_CD>;
-						bias-disable;
-					};
-				};
-
-				pinctrl_spi0_default: spi0_default {
-					pinmux = <PIN_PA14__SPI0_SPCK>,
-						 <PIN_PA15__SPI0_MOSI>,
-						 <PIN_PA16__SPI0_MISO>,
-						 <PIN_PA17__SPI0_NPCS0>;
-					bias-disable;
-				};
-
-				pinctrl_uart1_default: uart1_default {
-					pinmux = <PIN_PD2__URXD1>,
-						 <PIN_PD3__UTXD1>;
-					bias-disable;
-				};
-
-				pinctrl_uart3_default: uart3_default {
-					pinmux = <PIN_PC12__URXD3>,
-						 <PIN_PC13__UTXD3>;
-					bias-disable;
-				};
-
-				pinctrl_usb_default: usb_default {
-					pinmux = <PIN_PA27__GPIO>,
-						 <PIN_PD19__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_usba_vbus: usba_vbus {
-					pinmux = <PIN_PD20__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus1_an: mikrobus1_an {
-					pinmux = <PIN_PD25__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus2_an: mikrobus2_an {
-					pinmux = <PIN_PD26__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus1_rst: mikrobus1_rst {
-					pinmux = <PIN_PB2__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus2_rst: mikrobus2_rst {
-					pinmux = <PIN_PA26__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
-					pinmux = <PIN_PD0__FLEXCOM4_IO4>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
-					pinmux = <PIN_PC31__FLEXCOM4_IO3>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus_spi: mikrobus_spi {
-					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
-						 <PIN_PC29__FLEXCOM4_IO1>,
-						 <PIN_PC30__FLEXCOM4_IO2>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus1_pwm: mikrobus1_pwm {
-					pinmux = <PIN_PB1__PWML1>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus2_pwm: mikrobus2_pwm {
-					pinmux = <PIN_PA31__PWML0>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus1_int: mikrobus1_int {
-					pinmux = <PIN_PB0__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus2_int: mikrobus2_int {
-					pinmux = <PIN_PA25__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus1_uart: mikrobus1_uart {
-					pinmux = <PIN_PB3__URXD4>,
-						 <PIN_PB4__UTXD4>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus2_uart: mikrobus2_uart {
-					pinmux = <PIN_PD23__URXD2>,
-						 <PIN_PD24__UTXD2>;
-					bias-disable;
-				};
-
-				pinctrl_mikrobus_i2c: mikrobus1_i2c {
-					pinmux = <PIN_PA24__FLEXCOM1_IO0>,
-						 <PIN_PA23__FLEXCOM1_IO1>;
-					bias-disable;
-				};
-
-				pinctrl_i2c3_gpio: i2c3_gpio {
-					pinmux = <PIN_PA24__GPIO>,
-						 <PIN_PA23__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_flx4_default: flx4_uart_default {
-					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
-						 <PIN_PC29__FLEXCOM4_IO1>,
-						 <PIN_PC30__FLEXCOM4_IO2>,
-						 <PIN_PC31__FLEXCOM4_IO3>,
-						 <PIN_PD0__FLEXCOM4_IO4>;
-					bias-disable;
-				};
-			};
-
-			can1: can@fc050000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can1_default>;
-				status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio_default>;
-
-		button {
-			label = "USER";
-			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led_gpio_default>;
-		status = "okay"; /* Conflict with pwm0. */
-
-		led-red {
-			label = "red";
-			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-green {
-			label = "green";
-			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-blue {
-			label = "blue";
-			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	vddin_3v3: fixed-regulator-vddin_3v3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VDDIN_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		status = "okay";
-	};
-
-	vddana: fixed-regulator-vddana {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VDDANA";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vddin_3v3>;
-		status = "okay";
-	};
-
-	advref: fixed-regulator-advref {
-		compatible = "regulator-fixed";
-
-		regulator-name = "advref";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vddana>;
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
deleted file mode 100644
index 4617805c77488..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ /dev/null
@@ -1,386 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
- *
- * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
- *
- * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
- * Author: Eugen Hristev <eugen.hristev@microcihp.com>
- */
-#include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/mfd/atmel-flexcom.h>
-#include <dt-bindings/pinctrl/at91.h>
-
-/ {
-	model = "Microchip SAMA5D27 WLSOM1";
-	compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
-
-	aliases {
-		i2c0 = &i2c0;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <24000000>;
-		};
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-wilc1000";
-		reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
-		powerdown-gpios = <&pioA PIN_PA29 GPIO_ACTIVE_HIGH>;
-		pinctrl-0 = <&pinctrl_wilc_pwrseq>;
-		pinctrl-names = "default";
-	};
-};
-
-&flx1 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-
-	uart6: serial@200 {
-		pinctrl-0 = <&pinctrl_flx1_default>;
-		pinctrl-names = "default";
-	};
-};
-
-&i2c0 {
-	pinctrl-0 = <&pinctrl_i2c0_default>;
-	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	pinctrl-names = "default", "gpio";
-	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c1 {
-	dmas = <0>, <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	mcp16502@5b {
-		compatible = "microchip,mcp16502";
-		reg = <0x5b>;
-		status = "okay";
-		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
-
-		regulators {
-			vdd_3v3: VDD_IO {
-				regulator-name = "VDD_IO";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-initial-mode = <2>;
-				regulator-allowed-modes = <2>, <4>;
-				regulator-always-on;
-
-				regulator-state-standby {
-					regulator-on-in-suspend;
-					regulator-mode = <4>;
-				};
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-mode = <4>;
-				};
-			};
-
-			vddio_ddr: VDD_DDR {
-				regulator-name = "VDD_DDR";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-initial-mode = <2>;
-				regulator-allowed-modes = <2>, <4>;
-				regulator-always-on;
-
-				regulator-state-standby {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1200000>;
-					regulator-changeable-in-suspend;
-					regulator-mode = <4>;
-				};
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1200000>;
-					regulator-changeable-in-suspend;
-					regulator-mode = <4>;
-				};
-			};
-
-			vdd_core: VDD_CORE {
-				regulator-name = "VDD_CORE";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-initial-mode = <2>;
-				regulator-allowed-modes = <2>, <4>;
-				regulator-always-on;
-
-				regulator-state-standby {
-					regulator-on-in-suspend;
-					regulator-mode = <4>;
-				};
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-mode = <4>;
-				};
-			};
-
-			vdd_ddr: VDD_OTHER {
-				regulator-name = "VDD_OTHER";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-initial-mode = <2>;
-				regulator-allowed-modes = <2>, <4>;
-				regulator-always-on;
-
-				regulator-state-standby {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-					regulator-changeable-in-suspend;
-					regulator-mode = <4>;
-				};
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-					regulator-changeable-in-suspend;
-					regulator-mode = <4>;
-				};
-			};
-
-			LDO1 {
-				regulator-name = "LDO1";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-
-				regulator-state-standby {
-					regulator-on-in-suspend;
-				};
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			LDO2 {
-				regulator-name = "LDO2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-standby {
-					regulator-on-in-suspend;
-				};
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&macb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_macb0_default>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	phy-mode = "rmii";
-
-	ethernet-phy@0 {
-		reg = <0x0>;
-		interrupt-parent = <&pioA>;
-		interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_macb0_phy_irq>;
-	};
-};
-
-&pmc {
-	atmel,osc-bypass;
-};
-
-&qspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi1_default>;
-	status = "disabled";
-
-	qspi1_flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-		spi-cs-setup-ns = <7>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
-		m25p,fast-read;
-		status = "disabled";
-
-		at91bootstrap@0 {
-			label = "at91bootstrap";
-			reg = <0x0 0x40000>;
-		};
-
-		bootloader@40000 {
-			label = "bootloader";
-			reg = <0x40000 0xc0000>;
-		};
-
-		bootloaderenvred@100000 {
-			label = "bootloader env redundant";
-			reg = <0x100000 0x40000>;
-		};
-
-		bootloaderenv@140000 {
-			label = "bootloader env";
-			reg = <0x140000 0x40000>;
-		};
-
-		dtb@180000 {
-			label = "device tree";
-			reg = <0x180000 0x80000>;
-		};
-
-		kernel@200000 {
-			label = "kernel";
-			reg = <0x200000 0x600000>;
-		};
-	};
-};
-
-&pioA {
-	pinctrl_flx1_default: flx1_usart_default {
-		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
-			 <PIN_PA23__FLEXCOM1_IO1>,
-			 <PIN_PA25__FLEXCOM1_IO3>,
-			 <PIN_PA26__FLEXCOM1_IO4>;
-		bias-disable;
-	};
-
-	pinctrl_i2c0_default: i2c0_default {
-		pinmux = <PIN_PD21__TWD0>,
-			 <PIN_PD22__TWCK0>;
-		bias-disable;
-	};
-
-	pinctrl_i2c0_gpio: i2c0_gpio {
-		pinmux = <PIN_PD21__GPIO>,
-			 <PIN_PD22__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_i2c1_default: i2c1_default {
-		pinmux = <PIN_PD19__TWD1>,
-			 <PIN_PD20__TWCK1>;
-		bias-disable;
-	};
-
-	pinctrl_i2c1_gpio: i2c1_gpio {
-		pinmux = <PIN_PD19__GPIO>,
-			 <PIN_PD20__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_macb0_default: macb0_default {
-		pinmux = <PIN_PB14__GTXCK>,
-			 <PIN_PB15__GTXEN>,
-			 <PIN_PB16__GRXDV>,
-			 <PIN_PB17__GRXER>,
-			 <PIN_PB18__GRX0>,
-			 <PIN_PB19__GRX1>,
-			 <PIN_PB20__GTX0>,
-			 <PIN_PB21__GTX1>,
-			 <PIN_PB22__GMDC>,
-			 <PIN_PB23__GMDIO>;
-		bias-disable;
-	};
-
-	pinctrl_macb0_phy_irq: macb0_phy_irq {
-		pinmux = <PIN_PB24__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_qspi1_default: qspi1_default {
-		pinmux = <PIN_PB5__QSPI1_SCK>,
-			 <PIN_PB6__QSPI1_CS>,
-			 <PIN_PB7__QSPI1_IO0>,
-			 <PIN_PB8__QSPI1_IO1>,
-			 <PIN_PB9__QSPI1_IO2>,
-			 <PIN_PB10__QSPI1_IO3>;
-		bias-pull-up;
-	};
-
-	pinctrl_sdmmc1_default: sdmmc1_default {
-		cmd-data {
-			pinmux = <PIN_PA28__SDMMC1_CMD>,
-				 <PIN_PA18__SDMMC1_DAT0>,
-				 <PIN_PA19__SDMMC1_DAT1>,
-				 <PIN_PA20__SDMMC1_DAT2>,
-				 <PIN_PA21__SDMMC1_DAT3>;
-			bias-disable;
-		};
-
-		conf-ck {
-			pinmux = <PIN_PA22__SDMMC1_CK>;
-			bias-disable;
-		};
-	};
-
-	pinctrl_wilc_default: wilc_default {
-		conf-irq {
-			pinmux = <PIN_PB25__GPIO>;
-			bias-disable;
-		};
-	};
-
-	pinctrl_wilc_pwrseq: wilc_pwrseq {
-		conf-ce-nrst {
-			pinmux = <PIN_PA27__GPIO>,
-				 <PIN_PA29__GPIO>;
-			bias-disable;
-		};
-
-		conf-rtcclk {
-			pinmux = <PIN_PB13__PCK1>;
-			bias-disable;
-		};
-	};
-};
-
-&sdmmc1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc1_default>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	no-1-8-v;
-	non-removable;
-	bus-width = <4>;
-	status = "okay";
-
-	wilc: wifi@0 {
-		reg = <0>;
-		compatible = "microchip,wilc1000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wilc_default>;
-		clocks = <&pmc PMC_TYPE_SYSTEM 9>;
-		clock-names = "rtc";
-		interrupts = <PIN_PB25 IRQ_TYPE_NONE>;
-		interrupt-parent = <&pioA>;
-		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
-		assigned-clock-rates = <32768>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
deleted file mode 100644
index e055b9e2fe344..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ /dev/null
@@ -1,269 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
- *
- * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
- *
- * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
- */
-/dts-v1/;
-#include "at91-sama5d27_wlsom1.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Microchip SAMA5D27 WLSOM1 EK";
-	compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
-
-	aliases {
-		serial0 = &uart0;	/* DBGU */
-		serial1 = &uart6;	/* BT */
-		serial2 = &uart5;	/* mikro BUS 2 */
-		serial3 = &uart3;	/* mikro BUS 1 */
-		i2c1 = &i2c1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio_default>;
-
-		button-1 {
-			label = "USER BUTTON";
-			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led_gpio_default>;
-		status = "okay";
-
-		led-red {
-			label = "red";
-			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-green {
-			label = "green";
-			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-blue {
-			label = "blue";
-			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&adc {
-	vddana-supply = <&vdd_3v3>;
-	vref-supply = <&vdd_3v3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc_default>;
-	status = "okay";
-};
-
-&flx0 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	uart5: serial@200 {
-		pinctrl-0 = <&pinctrl_flx0_default>;
-		pinctrl-names = "default";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		status = "okay";
-	};
-};
-
-&flx1 {
-	status = "okay";
-
-	uart6: serial@200 {
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		status = "okay";
-	};
-};
-
-&macb0 {
-	status = "okay";
-};
-
-&pioA {
-	/*
-	 * There is no real pinmux for ADC, if the pin
-	 * is not requested by another peripheral then
-	 * the muxing is done when channel is enabled.
-	 * Requesting pins for ADC is GPIO is
-	 * encouraged to prevent conflicts and to
-	 * disable bias in order to be in the same
-	 * state when the pin is not muxed to the adc.
-	 */
-	pinctrl_adc_default: adc_default {
-		pinmux = <PIN_PD25__GPIO>,
-			 <PIN_PD26__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_flx0_default: flx0_usart_default {
-		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
-			 <PIN_PB29__FLEXCOM0_IO1>;
-		bias-disable;
-	};
-
-	pinctrl_key_gpio_default: key_gpio_default {
-		pinmux = <PIN_PB2__GPIO>;
-		bias-pull-up;
-	};
-
-	pinctrl_led_gpio_default: led_gpio_default {
-		pinmux = <PIN_PA6__GPIO>,
-			 <PIN_PA7__GPIO>,
-			 <PIN_PA8__GPIO>;
-		bias-pull-down;
-	};
-
-	pinctrl_sdmmc0_default: sdmmc0_default {
-		cmd_data {
-			pinmux = <PIN_PA1__SDMMC0_CMD>,
-				 <PIN_PA2__SDMMC0_DAT0>,
-				 <PIN_PA3__SDMMC0_DAT1>,
-				 <PIN_PA4__SDMMC0_DAT2>,
-				 <PIN_PA5__SDMMC0_DAT3>;
-			bias-disable;
-		};
-
-		ck_cd_vddsel {
-			pinmux = <PIN_PA0__SDMMC0_CK>,
-				 <PIN_PA11__SDMMC0_VDDSEL>,
-				 <PIN_PA12__SDMMC0_WP>,
-				 <PIN_PA13__SDMMC0_CD>;
-			bias-disable;
-		};
-	};
-
-	pinctrl_uart0_default: uart0_default {
-		pinmux = <PIN_PB26__URXD0>,
-			 <PIN_PB27__UTXD0>;
-		bias-disable;
-	};
-
-	pinctrl_uart3_default: uart3_default {
-		pinmux = <PIN_PB11__URXD3>,
-			 <PIN_PB12__UTXD3>;
-		bias-disable;
-	};
-
-	pinctrl_pwm0_default: pwm0_default {
-		pinmux = <PIN_PA31__PWML0>,
-			 <PIN_PA30__PWMH0>;
-		bias-disable;
-	};
-
-	pinctrl_usb_default: usb_default {
-		pinmux = <PIN_PA10__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_usba_vbus: usba_vbus {
-		pinmux = <PIN_PA16__GPIO>;
-		bias-disable;
-	};
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default>;
-	status = "okay";
-};
-
-&qspi1 {
-	status = "okay";
-
-	qspi1_flash: flash@0 {
-		status = "okay";
-	};
-};
-
-&sdmmc0 {
-	bus-width = <4>;
-	mmc-ddr-3_3v;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc0_default>;
-	status = "okay";
-};
-
-&shutdown_controller {
-	debounce-delay-us = <976>;
-	atmel,wakeup-rtc-timer;
-
-	input@0 {
-		reg = <0>;
-	};
-};
-
-&tcb0 {
-	timer0: timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
-
-	timer1: timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart0_default>;
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_default>;
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "okay";
-};
-
-&usb0 {
-	atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usba_vbus>;
-	status = "okay";
-};
-
-&usb1 {
-	num-ports = <3>;
-	atmel,vbus-gpio = <0
-			   &pioA PIN_PA10 GPIO_ACTIVE_HIGH
-			   0
-			  >;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_default>;
-	status = "okay";
-};
-
-&usb2 {
-	phy_type = "hsic";
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
-
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
deleted file mode 100644
index 999adeca6f336..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ /dev/null
@@ -1,790 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sama5d2_icp.dts - Device Tree file for SAMA5D2-ICP board
- *
- *  Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
- *
- *	Author: Radu Pirea & Razvan Stefanescu,
- *		Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
- *		Cristian Birsan <cristian.birsan@microchip.com>
- */
-/dts-v1/;
-#include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mfd/atmel-flexcom.h>
-
-/ {
-	model = "Microchip SAMA5D2-ICP";
-	compatible = "microchip,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
-
-	aliases {
-		serial0 = &uart0;	/* debug uart0 + mikro BUS 1 */
-		serial1 = &uart1;	/* mikro BUS 3 */
-		serial3 = &uart3;	/* mikro BUS 2 */
-		serial5 = &uart7;	/* flx2 */
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio_default>;
-
-		button-1 {
-			label = "USER_PB1";
-			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led_gpio_default>;
-		status = "okay"; /* conflict with pwm0 */
-
-		led-red {
-			label = "red";
-			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-green {
-			label = "green";
-			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-blue {
-			label = "blue";
-			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&adc {
-	vddana-supply = <&vdd_io_reg>;
-	vref-supply = <&vdd_io_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
-	status = "okay";
-};
-
-&can0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can0_default>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1_default>;
-	status = "okay";
-};
-
-&flx0 { /* mikrobus2 spi */
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
-	status = "okay";
-
-	spi2: spi@400 {
-		dmas = <0>, <0>;
-		cs-gpios = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mikrobus2_spi &pinctrl_ksz_spi_cs>;
-		status = "okay";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch0: ksz8563@0 {
-			compatible = "microchip,ksz8563";
-			reg = <0>;
-			reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>;
-
-			spi-max-frequency = <500000>;
-			spi-cpha;
-			spi-cpol;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					label = "lan1";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan2";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "cpu";
-					ethernet = <&macb0>;
-					phy-mode = "mii";
-					fixed-link {
-						speed = <100>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
-};
-
-&flx2 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	uart7: serial@200 {
-		pinctrl-0 = <&pinctrl_flx2_default>;
-		pinctrl-names = "default";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		status = "okay"; /* Conflict w/ qspi1. */
-	};
-};
-
-&flx3 { /* mikrobus1 spi */
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
-	status = "okay";
-
-	spi5: spi@400 {
-		dmas = <0>, <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
-		status = "okay";
-	};
-};
-
-&flx4 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c6: i2c@600 {
-		dmas = <0>, <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx4_default>;
-		i2c-digital-filter;
-		i2c-digital-filter-width-ns = <35>;
-		status = "okay";
-
-		mcp16502@5b {
-			compatible = "microchip,mcp16502";
-			reg = <0x5b>;
-			status = "okay";
-			lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
-
-			regulators {
-				vdd_io_reg: VDD_IO {
-					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-initial-mode = <2>;
-					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-						regulator-mode = <4>;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-						regulator-mode = <4>;
-					};
-				};
-
-				VDD_DDR {
-					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-initial-mode = <2>;
-					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-						regulator-mode = <4>;
-					};
-
-					regulator-state-mem {
-						regulator-on-in-suspend;
-						regulator-mode = <4>;
-					};
-				};
-
-				VDD_CORE {
-					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-initial-mode = <2>;
-					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-						regulator-mode = <4>;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-						regulator-mode = <4>;
-					};
-				};
-
-				VDD_OTHER {
-					regulator-name = "VDD_OTHER";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
-					regulator-initial-mode = <2>;
-					regulator-allowed-modes = <2>, <4>;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-						regulator-mode = <4>;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-						regulator-mode = <4>;
-					};
-				};
-
-				LDO1 {
-					regulator-name = "LDO1";
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <2500000>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				LDO2 {
-					regulator-name = "LDO2";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-			};
-		};
-	};
-};
-
-&i2c0 { /* mikrobus i2c */
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_mikrobus_i2c>;
-	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	i2c-digital-filter;
-	i2c-digital-filter-width-ns = <35>;
-	status = "okay";
-};
-
-&i2c1 {
-	dmas = <0>, <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	i2c-digital-filter;
-	i2c-digital-filter-width-ns = <35>;
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-		status = "okay";
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-		status = "disabled";
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-		status = "disabled";
-	};
-};
-
-&macb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>;
-	phy-mode = "mii";
-	status = "okay";
-
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&pioA {
-	pinctrl_adc_default: adc_default {
-		pinmux = <PIN_PD24__GPIO>,
-				<PIN_PD25__GPIO>,
-				<PIN_PD26__GPIO>;
-		bias-disable;
-	};
-
-	/*
-	 * The ADTRG pin can work on any edge type.
-	 * In here it's being pulled up, so need to
-	 * connect it to ground to get an edge e.g.
-	 * Trigger can be configured on falling, rise
-	 * or any edge, and the pull-up can be changed
-	 * to pull-down or left floating according to
-	 * needs.
-	 */
-	pinctrl_adtrg_default: adtrg_default {
-		pinmux = <PIN_PD31__ADTRG>;
-		bias-pull-up;
-	};
-
-	pinctrl_flx4_default: flx4_default {
-		pinmux = <PIN_PC28__FLEXCOM4_IO0>,
-			 <PIN_PC29__FLEXCOM4_IO1>;
-		bias-disable;
-	};
-
-	pinctrl_can0_default: can0_default {
-		pinmux = <PIN_PC10__CANTX0>,
-			 <PIN_PC11__CANRX0>;
-		bias-disable;
-	};
-
-	pinctrl_can1_default: can1_default {
-		pinmux = <PIN_PC26__CANTX1>,
-			 <PIN_PC27__CANRX1>;
-		bias-disable;
-	};
-
-	pinctrl_i2c1_default: i2c1_default {
-		pinmux = <PIN_PD19__TWD1>,
-			 <PIN_PD20__TWCK1>;
-		bias-disable;
-	};
-
-	pinctrl_i2c1_gpio: i2c1_gpio {
-                pinmux = <PIN_PD19__GPIO>,
-                         <PIN_PD20__GPIO>;
-                bias-disable;
-        };
-
-	pinctrl_key_gpio_default: key_gpio_default {
-		pinmux = <PIN_PD0__GPIO>;
-		bias-pull-up;
-	};
-
-	pinctrl_led_gpio_default: led_gpio_default {
-		pinmux = <PIN_PB0__GPIO>,
-			 <PIN_PB1__GPIO>,
-			 <PIN_PA31__GPIO>;
-		bias-pull-up;
-	};
-
-	pinctrl_qspi1_default: qspi1_default {
-		pinmux = <PIN_PA6__QSPI1_SCK>,
-			 <PIN_PA7__QSPI1_IO0>,
-			 <PIN_PA8__QSPI1_IO1>,
-			 <PIN_PA9__QSPI1_IO2>,
-			 <PIN_PA10__QSPI1_IO3>,
-			 <PIN_PA11__QSPI1_CS>;
-		bias-disable;
-	};
-
-	pinctrl_sdmmc0_default: sdmmc0_default {
-		cmd_data {
-			pinmux = <PIN_PA1__SDMMC0_CMD>,
-				 <PIN_PA2__SDMMC0_DAT0>,
-				 <PIN_PA3__SDMMC0_DAT1>,
-				 <PIN_PA4__SDMMC0_DAT2>,
-				 <PIN_PA5__SDMMC0_DAT3>;
-			bias-disable;
-		};
-
-		ck_cd {
-			pinmux = <PIN_PA0__SDMMC0_CK>,
-				 <PIN_PA13__SDMMC0_CD>;
-			bias-disable;
-		};
-	};
-
-	pinctrl_sdmmc1_default: sdmmc1_default {
-		cmd_data {
-			pinmux = <PIN_PA18__SDMMC1_DAT0>,
-				 <PIN_PA19__SDMMC1_DAT1>,
-				 <PIN_PA20__SDMMC1_DAT2>,
-				 <PIN_PA21__SDMMC1_DAT3>;
-			bias-disable;
-		};
-
-		ck_cd {
-			pinmux = <PIN_PA22__SDMMC1_CK>,
-				 <PIN_PA28__SDMMC1_CMD>;
-			bias-disable;
-		};
-	};
-
-	pinctrl_mikrobus_i2c: mikrobus_i2c {
-		pinmux = <PIN_PD22__TWCK0>,
-			 <PIN_PD21__TWD0>;
-		bias-disable;
-	};
-
-	pinctrl_i2c0_gpio: i2c0_gpio {
-		pinmux = <PIN_PD21__GPIO>,
-			 <PIN_PD22__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus1_an: mikrobus1_an {
-		pinmux = <PIN_PD26__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus1_rst: mikrobus1_rst {
-		pinmux = <PIN_PC5__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
-		pinmux = <PIN_PC21__FLEXCOM3_IO3>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus1_spi: mikrobus1_spi {
-		pinmux = <PIN_PC20__FLEXCOM3_IO0>,
-			 <PIN_PC19__FLEXCOM3_IO1>,
-			 <PIN_PC18__FLEXCOM3_IO2>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus1_pwm: mikrobus1_pwm {
-		pinmux = <PIN_PC4__TIOB1>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus1_int: mikrobus1_int {
-		pinmux = <PIN_PC3__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus1_uart: mikrobus1_uart {
-		pinmux = <PIN_PB26__URXD0>,
-			 <PIN_PB27__UTXD0>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus2_an: mikrobus2_an {
-		pinmux = <PIN_PD25__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus2_rst: mikrobus2_rst {
-		pinmux = <PIN_PB24__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
-		pinmux = <PIN_PB31__FLEXCOM0_IO3>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus2_spi: mikrobus2_spi {
-		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
-			 <PIN_PB29__FLEXCOM0_IO1>,
-			 <PIN_PB30__FLEXCOM0_IO2>;
-		bias-disable;
-	};
-
-	pinctrl_ksz_spi_cs: ksz_spi_cs {
-		pinmux = <PIN_PC0__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus2_pwm: mikrobus2_pwm {
-		pinmux = <PIN_PB23__TIOB2>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus2_int: mikrobus2_int {
-		pinmux = <PIN_PB22__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus2_uart: mikrobus2_uart {
-		pinmux = <PIN_PC12__URXD3>,
-			 <PIN_PC13__UTXD3>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus3_an: mikrobus3_an {
-		pinmux = <PIN_PD24__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus3_rst: mikrobus3_rst {
-		pinmux = <PIN_PB21__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus3_spi_cs: mikrobus3_spi_cs {
-		pinmux = <PIN_PA17__SPI0_NPCS0>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus3_spi: mikrobus3_spi {
-		pinmux = <PIN_PA14__SPI0_SPCK>,
-			 <PIN_PA16__SPI0_MISO>,
-			 <PIN_PA15__SPI0_MOSI>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus3_pwm: mikrobus3_pwm {
-		pinmux = <PIN_PB20__TIOB3>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus3_int: mikrobus3_int {
-		pinmux = <PIN_PB18__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus3_uart: mikrobus3_uart {
-		pinmux = <PIN_PC7__URXD1>,
-			 <PIN_PC8__UTXD1>;
-		bias-disable;
-	};
-
-	pinctrl_usb_default: usb_default {
-		pinmux = <PIN_PC17__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_usba_vbus: usba_vbus {
-		pinmux = <PIN_PD23__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
-		pinmux = <PIN_PB5__PWMH2>,
-			 <PIN_PB6__PWML2>;
-		bias-pull-up;
-	};
-
-	pinctrl_macb0_default: macb0_default {
-		pinmux = <PIN_PD1__GRXCK>,
-			 <PIN_PD2__GTXER>,
-			 <PIN_PD5__GRX2>,
-			 <PIN_PD6__GRX3>,
-			 <PIN_PD7__GTX2>,
-			 <PIN_PD8__GTX3>,
-			 <PIN_PD9__GTXCK>,
-			 <PIN_PD10__GTXEN>,
-			 <PIN_PD11__GRXDV>,
-			 <PIN_PD12__GRXER>,
-			 <PIN_PD13__GRX0>,
-			 <PIN_PD14__GRX1>,
-			 <PIN_PD15__GTX0>,
-			 <PIN_PD16__GTX1>,
-			 <PIN_PD17__GMDC>,
-			 <PIN_PD18__GMDIO>;
-		bias-disable;
-	};
-
-	pinctrl_macb0_phy_irq: macb0_phy_irq {
-		pinmux = <PIN_PD3__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_macb0_rst: macb0_sw_rst {
-		pinmux = <PIN_PD4__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_flx2_default: flx2_default {
-		pinmux = <PIN_PA6__FLEXCOM2_IO0>,
-			 <PIN_PA7__FLEXCOM2_IO1>,
-			 <PIN_PA9__FLEXCOM2_IO3>,
-			 <PIN_PA10__FLEXCOM2_IO4>;
-		bias-disable;
-	};
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
-	status = "disabled"; /* conflict with leds, HSIC */
-};
-
-&qspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi1_default>;
-	status = "disabled"; /* Conflict with wilc_pwrseq, flx2 */
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-		spi-cs-setup-ns = <7>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		m25p,fast-read;
-
-		at91bootstrap@0 {
-			label = "qspi: at91bootstrap";
-			reg = <0x00000000 0x00040000>;
-		};
-
-		bootloader@40000 {
-			label = "qspi: bootloader";
-			reg = <0x00040000 0x000c0000>;
-		};
-
-		bootloaderenvred@100000 {
-			label = "qspi: bootloader env redundant";
-			reg = <0x00100000 0x00040000>;
-		};
-
-		bootloaderenv@140000 {
-			label = "qspi: bootloader env";
-			reg = <0x00140000 0x00040000>;
-		};
-
-		dtb@180000 {
-			label = "qspi: device tree";
-			reg = <0x00180000 0x00080000>;
-		};
-
-		kernel@200000 {
-			label = "qspi: kernel";
-			reg = <0x00200000 0x00600000>;
-		};
-	};
-};
-
-&sdmmc0 {
-	no-1-8-v;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc0_default>;
-	status = "okay";
-};
-
-&shutdown_controller {
-	debounce-delay-us = <976>;
-	atmel,wakeup-rtc-timer;
-
-	input@0 {
-		reg = <0>;
-	};
-};
-
-&spi0 {  /* mikrobus3 spi */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mikrobus3_spi &pinctrl_mikrobus3_spi_cs>;
-	status = "okay";
-};
-
-&tcb0 {
-	timer0: timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
-
-	timer1: timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mikrobus1_uart>;
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mikrobus3_uart>;
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mikrobus2_uart>;
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "okay";
-};
-
-&usb0 {
-	atmel,vbus-gpio = <&pioA PIN_PD23 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usba_vbus>;
-	status = "okay";
-};
-
-&usb1 {
-	num-ports = <3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_default>;
-	status = "okay";
-};
-
-&usb2 {
-	phy_type = "hsic";
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
deleted file mode 100644
index bf1c9ca72a9f3..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ /dev/null
@@ -1,435 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR X11)
-/*
- * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
- *
- *  Copyright (C) 2017 Microchip/Atmel,
- *		  2017 Wenyou Yang <wenyou.yang@microchip.com>
- *		  2017 Ludovic Desroches <ludovic.desroches@microchip.com>
- */
-/dts-v1/;
-#include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
-#include <dt-bindings/mfd/atmel-flexcom.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/at91.h>
-
-/ {
-	model = "Atmel SAMA5D2 PTC EK";
-	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
-
-	aliases {
-		serial0 = &uart0;	/* DBGU */
-		i2c0 = &i2c0;	/* mikroBUS 1 */
-		i2c1 = &i2c1;	/* XPRO EXT1 */
-		i2c2 = &i2c2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <24000000>;
-		};
-	};
-
-	ahb {
-		usb0: gadget@300000 {
-			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-
-		usb1: ohci@400000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0
-					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
-					   0
-					  >;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_default>;
-			status = "okay";
-		};
-
-		usb2: ehci@500000 {
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_nand_default>;
-			status = "okay"; /* conflicts with sdmmc1 and qspi0 */
-
-			nand_controller: nand-controller {
-				status = "okay";
-
-				nand@3 {
-					reg = <0x3 0x0 0x2>;
-					atmel,rb = <0>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						bootloader@40000 {
-							label = "bootloader";
-							reg = <0x40000 0xc0000>;
-						};
-
-						bootloaderenvred@100000 {
-							label = "bootloader env redundant";
-							reg = <0x100000 0x40000>;
-						};
-
-						bootloaderenv@140000 {
-							label = "bootloader env";
-							reg = <0x140000 0x40000>;
-						};
-
-						dtb@180000 {
-							label = "device tree";
-							reg = <0x180000 0x80000>;
-						};
-
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
-						};
-
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x1f800000>;
-						};
-					};
-				};
-			};
-		};
-
-		sdmmc0: sdio-host@a0000000 {
-			bus-width = <8>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_sdmmc0_default>;
-			status = "okay";
-		};
-
-		apb {
-			spi0: spi@f8000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_default>;
-				status = "okay";
-			};
-
-			macb0: ethernet@f8008000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				phy-mode = "rmii";
-				status = "okay";
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-					interrupt-parent = <&pioA>;
-					interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
-
-			tcb0: timer@f800c000 {
-				timer0: timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer1: timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			uart0: serial@f801c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart0_default>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "okay";
-			};
-
-			uart2: serial@f8024000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart2_default>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "okay";
-			};
-
-			i2c0: i2c@f8028000 {
-				dmas = <0>, <0>;
-				pinctrl-names = "default", "gpio";
-				pinctrl-0 = <&pinctrl_i2c0_default>;
-				pinctrl-1 = <&pinctrl_i2c0_gpio>;
-				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-				status = "okay";
-			};
-
-			flx0: flexcom@f8034000 {
-				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-				status = "okay";
-
-				i2c2: i2c@600 {
-					dmas = <0>, <0>;
-					pinctrl-names = "default", "gpio";
-					pinctrl-0 = <&pinctrl_flx0_default>;
-					pinctrl-1 = <&pinctrl_flx0_gpio>;
-					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
-					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-					status = "okay";
-				};
-			};
-
-			shdwc@f8048010 {
-				debounce-delay-us = <976>;
-
-				input@0 {
-					reg = <0>;
-				};
-			};
-
-			watchdog@f8048040 {
-				status = "okay";
-			};
-
-			spi1: spi@fc000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1_default>;
-				status = "okay";
-			};
-
-			i2c1: i2c@fc028000 {
-				dmas = <0>, <0>;
-				pinctrl-names = "default", "gpio";
-				pinctrl-0 = <&pinctrl_i2c1_default>;
-				pinctrl-1 = <&pinctrl_i2c1_gpio>;
-				sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-				status = "okay";
-
-				at24@50 {
-					compatible = "atmel,24c02";
-					reg = <0x50>;
-					pagesize = <8>;
-				};
-			};
-
-			pinctrl@fc038000 {
-				pinctrl_flx0_default: flx0_default {
-					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
-						 <PIN_PB29__FLEXCOM0_IO1>;
-					bias-disable;
-				};
-
-				pinctrl_flx0_gpio: flx0_gpio {
-					pinmux = <PIN_PB28__GPIO>,
-						 <PIN_PB29__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_i2c0_default: i2c0_default {
-					pinmux = <PIN_PD21__TWD0>,
-						 <PIN_PD22__TWCK0>;
-					bias-disable;
-				};
-
-				pinctrl_i2c0_gpio: i2c0_gpio {
-					pinmux = <PIN_PD21__GPIO>,
-						 <PIN_PD22__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_i2c1_default: i2c1_default {
-					pinmux = <PIN_PC6__TWD1>,
-						 <PIN_PC7__TWCK1>;
-					bias-disable;
-				};
-
-				pinctrl_i2c1_gpio: i2c1_gpio {
-					pinmux = <PIN_PC6__GPIO>,
-						 <PIN_PC7__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_key_gpio_default: key_gpio_default {
-					pinmux = <PIN_PA10__GPIO>;
-					bias-pull-up;
-				};
-
-				pinctrl_led_gpio_default: led_gpio_default {
-					pinmux = <PIN_PB6__GPIO>,
-						 <PIN_PB8__GPIO>,
-						 <PIN_PB10__GPIO>;
-					bias-pull-up;
-				};
-
-				pinctrl_macb0_default: macb0_default {
-					pinmux = <PIN_PB14__GTXCK>,
-						 <PIN_PB15__GTXEN>,
-						 <PIN_PB16__GRXDV>,
-						 <PIN_PB17__GRXER>,
-						 <PIN_PB18__GRX0>,
-						 <PIN_PB19__GRX1>,
-						 <PIN_PB20__GTX0>,
-						 <PIN_PB21__GTX1>,
-						 <PIN_PB22__GMDC>,
-						 <PIN_PB23__GMDIO>;
-					bias-disable;
-				};
-
-				pinctrl_macb0_phy_irq: macb0_phy_irq {
-					pinmux = <PIN_PB24__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_nand_default: nand_default {
-					re_we_data {
-						pinmux = <PIN_PA22__D0>,
-							 <PIN_PA23__D1>,
-							 <PIN_PA24__D2>,
-							 <PIN_PA25__D3>,
-							 <PIN_PA26__D4>,
-							 <PIN_PA27__D5>,
-							 <PIN_PA28__D6>,
-							 <PIN_PA29__D7>,
-							 <PIN_PA30__NWE_NANDWE>,
-							 <PIN_PB2__NRD_NANDOE>;
-						bias-pull-up;
-						atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
-					};
-
-					ale_cle_rdy_cs {
-						pinmux = <PIN_PB0__A21_NANDALE>,
-							 <PIN_PB1__A22_NANDCLE>,
-							 <PIN_PC8__NANDRDY>,
-							 <PIN_PA31__NCS3>;
-						bias-pull-up;
-					};
-				};
-
-				pinctrl_sdmmc0_default: sdmmc0_default {
-					cmd_data {
-						pinmux = <PIN_PA1__SDMMC0_CMD>,
-							 <PIN_PA2__SDMMC0_DAT0>,
-							 <PIN_PA3__SDMMC0_DAT1>,
-							 <PIN_PA4__SDMMC0_DAT2>,
-							 <PIN_PA5__SDMMC0_DAT3>,
-							 <PIN_PA6__SDMMC0_DAT4>,
-							 <PIN_PA7__SDMMC0_DAT5>,
-							 <PIN_PA8__SDMMC0_DAT6>,
-							 <PIN_PA9__SDMMC0_DAT7>;
-						bias-pull-up;
-					};
-
-					ck_cd_vddsel {
-						pinmux = <PIN_PA0__SDMMC0_CK>,
-							 <PIN_PA11__SDMMC0_VDDSEL>,
-							 <PIN_PA13__SDMMC0_CD>;
-						bias-disable;
-					};
-				};
-
-				pinctrl_spi0_default: spi0_default {
-					pinmux = <PIN_PA14__SPI0_SPCK>,
-						 <PIN_PA15__SPI0_MOSI>,
-						 <PIN_PA16__SPI0_MISO>,
-						 <PIN_PA17__SPI0_NPCS0>;
-					bias-disable;
-				};
-
-				pinctrl_spi1_default: spi1_default {
-					pinmux = <PIN_PC1__SPI1_SPCK>,
-						 <PIN_PC2__SPI1_MOSI>,
-						 <PIN_PC3__SPI1_MISO>,
-						 <PIN_PC4__SPI1_NPCS0>;
-					bias-disable;
-				};
-
-				pinctrl_uart0_default: uart0_default {
-					pinmux = <PIN_PB26__URXD0>,
-						 <PIN_PB27__UTXD0>;
-					bias-disable;
-				};
-
-				pinctrl_uart2_default: uart2_default {
-					pinmux = <PIN_PD23__URXD2>,
-						 <PIN_PD24__UTXD2>;
-					bias-disable;
-				};
-
-				pinctrl_usb_default: usb_default {
-					pinmux = <PIN_PB12__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_usba_vbus: usba_vbus {
-					pinmux = <PIN_PB11__GPIO>;
-					bias-disable;
-				};
-
-			};
-
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio_default>;
-
-		button-1 {
-			label = "PB_USER";
-			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led_gpio_default>;
-		status = "okay";
-
-		led-red {
-			label = "red";
-			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-green {
-			label = "green";
-			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-blue {
-			label = "blue";
-			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
deleted file mode 100644
index 2d53c47d7cc86..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ /dev/null
@@ -1,745 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
- *
- *  Copyright (C) 2015 Atmel,
- *                2015 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-/dts-v1/;
-#include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
-#include <dt-bindings/mfd/atmel-flexcom.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
-
-/ {
-	model = "Atmel SAMA5D2 Xplained";
-	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
-
-	aliases {
-		serial0 = &uart1;	/* DBGU */
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;		/* XPRO EXT2 */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		usb0: gadget@300000 {
-			atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-
-		usb1: ohci@400000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
-					   &pioA PIN_PB10 GPIO_ACTIVE_HIGH
-					   0
-					  >;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_default>;
-			status = "okay";
-		};
-
-		usb2: ehci@500000 {
-			status = "okay";
-		};
-
-		sdmmc0: sdio-host@a0000000 {
-			bus-width = <8>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_sdmmc0_default>;
-			non-removable;
-			mmc-ddr-3_3v;
-			status = "okay";
-		};
-
-		sdmmc1: sdio-host@b0000000 {
-			bus-width = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_sdmmc1_default>;
-			status = "okay"; /* conflict with qspi0 */
-			vqmmc-supply = <&vdd_3v3_reg>;
-			vmmc-supply = <&vdd_3v3_reg>;
-		};
-
-		apb {
-			qspi0: spi@f0020000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_qspi0_default>;
-				status = "disabled"; /* conflict with sdmmc1 */
-
-				flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "jedec,spi-nor";
-					reg = <0>;
-					spi-max-frequency = <80000000>;
-					spi-tx-bus-width = <4>;
-					spi-rx-bus-width = <4>;
-					m25p,fast-read;
-
-					at91bootstrap@0 {
-						label = "at91bootstrap";
-						reg = <0x00000000 0x00040000>;
-					};
-
-					bootloader@40000 {
-						label = "bootloader";
-						reg = <0x00040000 0x000c0000>;
-					};
-
-					bootloaderenvred@100000 {
-						label = "bootloader env redundant";
-						reg = <0x00100000 0x00040000>;
-					};
-
-					bootloaderenv@140000 {
-						label = "bootloader env";
-						reg = <0x00140000 0x00040000>;
-					};
-
-					dtb@180000 {
-						label = "device tree";
-						reg = <0x00180000 0x00080000>;
-					};
-
-					kernel@200000 {
-						label = "kernel";
-						reg = <0x00200000 0x00600000>;
-					};
-
-					misc@800000 {
-						label = "misc";
-						reg = <0x00800000 0x00000000>;
-					};
-				};
-			};
-
-			spi0: spi@f8000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_default>;
-				status = "okay";
-
-				flash@0 {
-					compatible = "atmel,at25df321a";
-					reg = <0>;
-					spi-max-frequency = <50000000>;
-				};
-			};
-
-			macb0: ethernet@f8008000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				phy-mode = "rmii";
-				status = "okay";
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-					interrupt-parent = <&pioA>;
-					interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
-
-			tcb0: timer@f800c000 {
-				timer0: timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer1: timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			uart1: serial@f8020000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1_default>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "okay";
-			};
-
-			i2c0: i2c@f8028000 {
-				dmas = <0>, <0>;
-				pinctrl-names = "default", "gpio";
-				pinctrl-0 = <&pinctrl_i2c0_default>;
-				pinctrl-1 = <&pinctrl_i2c0_gpio>;
-				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-				i2c-sda-hold-time-ns = <350>;
-				status = "okay";
-
-				pmic@5b {
-					compatible = "active-semi,act8945a";
-					reg = <0x5b>;
-					active-semi,vsel-high;
-					status = "okay";
-
-					regulators {
-						vdd_1v35_reg: REG_DCDC1 {
-							regulator-name = "VDD_1V35";
-							regulator-min-microvolt = <1350000>;
-							regulator-max-microvolt = <1350000>;
-							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
-										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
-							regulator-always-on;
-
-							regulator-state-mem {
-								regulator-on-in-suspend;
-								regulator-suspend-min-microvolt = <1400000>;
-								regulator-suspend-max-microvolt = <1400000>;
-								regulator-changeable-in-suspend;
-								regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-							};
-						};
-
-						vdd_1v2_reg: REG_DCDC2 {
-							regulator-name = "VDD_1V2";
-							regulator-min-microvolt = <1100000>;
-							regulator-max-microvolt = <1300000>;
-							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
-										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
-							regulator-always-on;
-
-							regulator-state-mem {
-								regulator-off-in-suspend;
-							};
-						};
-
-						vdd_3v3_reg: REG_DCDC3 {
-							regulator-name = "VDD_3V3";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
-										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
-							regulator-always-on;
-
-							regulator-state-mem {
-								regulator-off-in-suspend;
-							};
-						};
-
-						vdd_fuse_reg: REG_LDO1 {
-							regulator-name = "VDD_FUSE";
-							regulator-min-microvolt = <2500000>;
-							regulator-max-microvolt = <2500000>;
-							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
-										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
-							regulator-always-on;
-
-							regulator-state-mem {
-								regulator-off-in-suspend;
-							};
-						};
-
-						vdd_3v3_lp_reg: REG_LDO2 {
-							regulator-name = "VDD_3V3_LP";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
-										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
-							regulator-always-on;
-
-							regulator-state-mem {
-								regulator-off-in-suspend;
-							};
-						};
-
-						vdd_led_reg: REG_LDO3 {
-							regulator-name = "VDD_LED";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
-										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
-							regulator-always-on;
-
-							regulator-state-mem {
-								regulator-off-in-suspend;
-							};
-						};
-
-						vdd_sdhc_1v8_reg: REG_LDO4 {
-							regulator-name = "VDD_SDHC_1V8";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <1800000>;
-							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
-										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
-							regulator-always-on;
-
-							regulator-state-mem {
-								regulator-off-in-suspend;
-							};
-						};
-					};
-
-					charger {
-						compatible = "active-semi,act8945a-charger";
-						pinctrl-names = "default";
-						pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
-						interrupt-parent = <&pioA>;
-						interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>;
-
-						active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
-						active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
-						active-semi,input-voltage-threshold-microvolt = <6600>;
-						active-semi,precondition-timeout = <40>;
-						active-semi,total-timeout = <3>;
-						status = "okay";
-					};
-				};
-			};
-
-			pwm0: pwm@f802c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
-				status = "disabled"; /* conflict with leds */
-			};
-
-			flx0: flexcom@f8034000 {
-				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-				status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
-
-				uart5: serial@200 {
-					dmas = <0>, <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_flx0_default>;
-					status = "okay";
-				};
-
-				i2c2: i2c@600 {
-					dmas = <0>, <0>;
-					pinctrl-names = "default", "gpio";
-					pinctrl-0 = <&pinctrl_flx0_default>;
-					pinctrl-1 = <&pinctrl_i2c2_gpio>;
-					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
-					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-					i2c-sda-hold-time-ns = <350>;
-					i2c-analog-filter;
-					i2c-digital-filter;
-					i2c-digital-filter-width-ns = <35>;
-					status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
-				};
-			};
-
-			shdwc@f8048010 {
-				debounce-delay-us = <976>;
-				atmel,wakeup-rtc-timer;
-
-				input@0 {
-					reg = <0>;
-				};
-			};
-
-			watchdog@f8048040 {
-				status = "okay";
-			};
-
-			i2s0: i2s@f8050000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2s0_default>;
-				status = "disabled"; /* conflict with can0 */
-			};
-
-			can0: can@f8054000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can0_default>;
-				status = "okay";
-			};
-
-			uart3: serial@fc008000 {
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart3_default>;
-				status = "okay";
-			};
-
-			flx4: flexcom@fc018000 {
-				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-				status = "okay";
-
-				i2c6: i2c@600 {
-					dmas = <0>, <0>;
-					pinctrl-names = "default", "gpio";
-					pinctrl-0 = <&pinctrl_flx4_default>;
-					pinctrl-1 = <&pinctrl_flx4_gpio>;
-					sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
-					scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-					i2c-analog-filter;
-					i2c-digital-filter;
-					i2c-digital-filter-width-ns = <35>;
-					status = "okay";
-				};
-			};
-
-			i2c1: i2c@fc028000 {
-				dmas = <0>, <0>;
-				pinctrl-names = "default", "gpio";
-				pinctrl-0 = <&pinctrl_i2c1_default>;
-				i2c-analog-filter;
-				i2c-digital-filter;
-				i2c-digital-filter-width-ns = <35>;
-				pinctrl-1 = <&pinctrl_i2c1_gpio>;
-				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-				status = "okay";
-
-				at24@54 {
-					compatible = "atmel,24c02";
-					reg = <0x54>;
-					pagesize = <16>;
-				};
-			};
-
-			adc: adc@fc030000 {
-				vddana-supply = <&vdd_3v3_lp_reg>;
-				vref-supply = <&vdd_3v3_lp_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
-				status = "okay";
-			};
-
-			pinctrl@fc038000 {
-				/*
-				 * There is no real pinmux for ADC, if the pin
-				 * is not requested by another peripheral then
-				 * the muxing is done when channel is enabled.
-				 * Requesting pins for ADC is GPIO is
-				 * encouraged to prevent conflicts and to
-				 * disable bias in order to be in the same
-				 * state when the pin is not muxed to the adc.
-				 */
-				pinctrl_adc_default: adc_default {
-					pinmux = <PIN_PD23__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_can0_default: can0_default {
-					pinmux = <PIN_PC10__CANTX0>,
-						 <PIN_PC11__CANRX0>;
-					bias-disable;
-				};
-
-				pinctrl_can1_default: can1_default {
-					pinmux = <PIN_PC26__CANTX1>,
-						 <PIN_PC27__CANRX1>;
-					bias-disable;
-				};
-
-				/*
-				 * The ADTRG pin can work on any edge type.
-				 * In here it's being pulled up, so need to
-				 * connect it to ground to get an edge e.g.
-				 * Trigger can be configured on falling, rise
-				 * or any edge, and the pull-up can be changed
-				 * to pull-down or left floating according to
-				 * needs.
-				 */
-				pinctrl_adtrg_default: adtrg_default {
-					pinmux = <PIN_PD31__ADTRG>;
-					bias-pull-up;
-				};
-
-				pinctrl_charger_chglev: charger_chglev {
-					pinmux = <PIN_PA12__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_charger_irq: charger_irq {
-					pinmux = <PIN_PB13__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_charger_lbo: charger_lbo {
-					pinmux = <PIN_PC8__GPIO>;
-					bias-pull-up;
-				};
-
-				pinctrl_classd_default_pfets: classd_default_pfets {
-					pinmux = <PIN_PB1__CLASSD_R0>,
-						 <PIN_PB3__CLASSD_R2>;
-					bias-pull-up;
-				};
-
-				pinctrl_classd_default_nfets: classd_default_nfets {
-					pinmux = <PIN_PB2__CLASSD_R1>,
-						 <PIN_PB4__CLASSD_R3>;
-					bias-pull-down;
-				};
-
-				pinctrl_flx0_default: flx0_default {
-					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
-						 <PIN_PB29__FLEXCOM0_IO1>;
-					bias-disable;
-				};
-
-				pinctrl_flx4_default: flx4_default {
-					pinmux = <PIN_PD12__FLEXCOM4_IO0>,
-						 <PIN_PD13__FLEXCOM4_IO1>;
-					bias-disable;
-				};
-
-				pinctrl_flx4_gpio: flx4_gpio {
-					pinmux = <PIN_PD12__GPIO>,
-						 <PIN_PD13__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_i2c0_default: i2c0_default {
-					pinmux = <PIN_PD21__TWD0>,
-						 <PIN_PD22__TWCK0>;
-					bias-disable;
-				};
-
-				pinctrl_i2c0_gpio: i2c0_gpio {
-					pinmux = <PIN_PD21__GPIO>,
-						 <PIN_PD22__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_i2c1_default: i2c1_default {
-					pinmux = <PIN_PD4__TWD1>,
-						 <PIN_PD5__TWCK1>;
-					bias-disable;
-				};
-
-				pinctrl_i2c1_gpio: i2c1_gpio {
-					pinmux = <PIN_PD4__GPIO>,
-						 <PIN_PD5__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_i2c2_gpio: i2c2_gpio {
-					pinmux = <PIN_PB28__GPIO>,
-						 <PIN_PB29__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_i2s0_default: i2s0_default {
-					pinmux = <PIN_PC1__I2SC0_CK>,
-						 <PIN_PC2__I2SC0_MCK>,
-						 <PIN_PC3__I2SC0_WS>,
-						 <PIN_PC4__I2SC0_DI0>,
-						 <PIN_PC5__I2SC0_DO0>;
-					bias-disable;
-				};
-
-				pinctrl_i2s1_default: i2s1_default {
-					pinmux = <PIN_PA15__I2SC1_CK>,
-						 <PIN_PA14__I2SC1_MCK>,
-						 <PIN_PA16__I2SC1_WS>,
-						 <PIN_PA17__I2SC1_DI0>,
-						 <PIN_PA18__I2SC1_DO0>;
-					bias-disable;
-				};
-
-				pinctrl_key_gpio_default: key_gpio_default {
-					pinmux = <PIN_PB9__GPIO>;
-					bias-pull-up;
-				};
-
-				pinctrl_led_gpio_default: led_gpio_default {
-					pinmux = <PIN_PB0__GPIO>,
-						 <PIN_PB5__GPIO>,
-						 <PIN_PB6__GPIO>;
-					bias-pull-up;
-				};
-
-				pinctrl_macb0_default: macb0_default {
-					pinmux = <PIN_PB14__GTXCK>,
-						 <PIN_PB15__GTXEN>,
-						 <PIN_PB16__GRXDV>,
-						 <PIN_PB17__GRXER>,
-						 <PIN_PB18__GRX0>,
-						 <PIN_PB19__GRX1>,
-						 <PIN_PB20__GTX0>,
-						 <PIN_PB21__GTX1>,
-						 <PIN_PB22__GMDC>,
-						 <PIN_PB23__GMDIO>;
-					bias-disable;
-				};
-
-				pinctrl_macb0_phy_irq: macb0_phy_irq {
-					pinmux = <PIN_PC9__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_qspi0_default: qspi0_default {
-					sck_cs {
-						pinmux = <PIN_PA22__QSPI0_SCK>,
-							 <PIN_PA23__QSPI0_CS>;
-						bias-disable;
-					};
-
-					data {
-						pinmux = <PIN_PA24__QSPI0_IO0>,
-							 <PIN_PA25__QSPI0_IO1>,
-							 <PIN_PA26__QSPI0_IO2>,
-							 <PIN_PA27__QSPI0_IO3>;
-						bias-pull-up;
-					};
-				};
-
-				pinctrl_sdmmc0_default: sdmmc0_default {
-					cmd_data {
-						pinmux = <PIN_PA1__SDMMC0_CMD>,
-							 <PIN_PA2__SDMMC0_DAT0>,
-							 <PIN_PA3__SDMMC0_DAT1>,
-							 <PIN_PA4__SDMMC0_DAT2>,
-							 <PIN_PA5__SDMMC0_DAT3>,
-							 <PIN_PA6__SDMMC0_DAT4>,
-							 <PIN_PA7__SDMMC0_DAT5>,
-							 <PIN_PA8__SDMMC0_DAT6>,
-							 <PIN_PA9__SDMMC0_DAT7>;
-						bias-disable;
-					};
-
-					ck_cd_rstn {
-						pinmux = <PIN_PA0__SDMMC0_CK>,
-							 <PIN_PA10__SDMMC0_RSTN>,
-							 <PIN_PA13__SDMMC0_CD>;
-						bias-disable;
-					};
-				};
-
-				pinctrl_sdmmc1_default: sdmmc1_default {
-					cmd_data {
-						pinmux = <PIN_PA28__SDMMC1_CMD>,
-							 <PIN_PA18__SDMMC1_DAT0>,
-							 <PIN_PA19__SDMMC1_DAT1>,
-							 <PIN_PA20__SDMMC1_DAT2>,
-							 <PIN_PA21__SDMMC1_DAT3>;
-						bias-disable;
-					};
-
-					conf-ck_cd {
-						pinmux = <PIN_PA22__SDMMC1_CK>,
-							 <PIN_PA30__SDMMC1_CD>;
-						bias-disable;
-					};
-				};
-
-				pinctrl_spi0_default: spi0_default {
-					pinmux = <PIN_PA14__SPI0_SPCK>,
-						 <PIN_PA15__SPI0_MOSI>,
-						 <PIN_PA16__SPI0_MISO>,
-						 <PIN_PA17__SPI0_NPCS0>;
-					bias-disable;
-				};
-
-				pinctrl_uart1_default: uart1_default {
-					pinmux = <PIN_PD2__URXD1>,
-						 <PIN_PD3__UTXD1>;
-					bias-disable;
-				};
-
-				pinctrl_uart3_default: uart3_default {
-					pinmux = <PIN_PB11__URXD3>,
-						 <PIN_PB12__UTXD3>;
-					bias-disable;
-				};
-
-				pinctrl_usb_default: usb_default {
-					pinmux = <PIN_PB10__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_usba_vbus: usba_vbus {
-					pinmux = <PIN_PA31__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
-					pinmux = <PIN_PB5__PWMH2>,
-						 <PIN_PB6__PWML2>;
-					bias-pull-up;
-				};
-			};
-
-			classd: classd@fc048000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_classd_default_pfets &pinctrl_classd_default_nfets>;
-				atmel,pwm-type = "diff";
-				atmel,non-overlap-time = <10>;
-				status = "okay";
-			};
-
-			i2s1: i2s@fc04c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2s1_default>;
-				status = "disabled"; /* conflict with spi0, sdmmc1 */
-			};
-
-			can1: can@fc050000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can1_default>;
-				status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio_default>;
-
-		button {
-			label = "PB_USER";
-			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led_gpio_default>;
-		status = "okay"; /* conflict with pwm0 */
-
-		led-red {
-			label = "red";
-			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
-		};
-
-
-		led-green {
-			label = "green";
-			gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
-		};
-
-		led-blue {
-			label = "blue";
-			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sama5d3_eds.dts b/arch/arm/boot/dts/at91-sama5d3_eds.dts
deleted file mode 100644
index c287b03d768b6..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d3_eds.dts
+++ /dev/null
@@ -1,307 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet
- *    Development System board.
- *
- * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
- *
- * Author: Jerry Ray <jerry.ray@microchip.com>
- */
-/dts-v1/;
-#include "sama5d36.dtsi"
-
-/ {
-	model = "SAMA5D3 Ethernet Development System";
-	compatible = "microchip,sama5d3-eds", "atmel,sama5d36",
-		     "atmel,sama5d3", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio>;
-
-		button-3 {
-			label = "PB_USER";
-			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
-			wakeup-source;
-		};
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x10000000>;
-	};
-
-	vcc_3v3_reg: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vcc_2v5_reg: regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_2V5";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-		vin-supply = <&vcc_3v3_reg>;
-	};
-
-	vcc_1v8_reg: regulator-3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		vin-supply = <&vcc_3v3_reg>;
-	};
-
-	vcc_1v2_reg: regulator-4 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V2";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-always-on;
-	};
-
-	vcc_mmc0_reg: regulator-5 {
-		compatible = "regulator-fixed";
-		regulator-name = "mmc0-card-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
-		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&can0 {
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand_controller: nand-controller {
-		status = "okay";
-
-		nand@3 {
-			reg = <0x3 0x0 0x2>;
-			atmel,rb = <0>;
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <4>;
-			nand-ecc-step-size = <512>;
-			nand-on-flash-bbt;
-			label = "atmel_nand";
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				at91bootstrap@0 {
-					label = "at91bootstrap";
-					reg = <0x0 0x40000>;
-				};
-
-				bootloader@40000 {
-					label = "bootloader";
-					reg = <0x40000 0xc0000>;
-				};
-
-				bootloaderenvred@100000 {
-					label = "bootloader env redundant";
-					reg = <0x100000 0x40000>;
-				};
-
-				bootloaderenv@140000 {
-					label = "bootloader env";
-					reg = <0x140000 0x40000>;
-				};
-
-				dtb@180000 {
-					label = "device tree";
-					reg = <0x180000 0x80000>;
-				};
-
-				kernel@200000 {
-					label = "kernel";
-					reg = <0x200000 0x600000>;
-				};
-
-				rootfs@800000 {
-					label = "rootfs";
-					reg = <0x800000 0x0f800000>;
-				};
-			};
-		};
-	};
-};
-
-&i2c0 {
-	pinctrl-0 = <&pinctrl_i2c0_pu>;
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-0 = <&pinctrl_i2c2_pu>;
-	status = "okay";
-};
-
-&main_xtal {
-	clock-frequency = <12000000>;
-};
-
-&mmc0 {
-	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
-		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
-	vmmc-supply = <&vcc_mmc0_reg>;
-	vqmmc-supply = <&vcc_3v3_reg>;
-	status = "okay";
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&pinctrl {
-	board {
-		pinctrl_i2c0_pu: i2c0-pu {
-			atmel,pins =
-				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-		};
-
-		pinctrl_i2c2_pu: i2c2-pu {
-			atmel,pins =
-				<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
-				<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
-		};
-
-		pinctrl_key_gpio: key-gpio-0 {
-			atmel,pins =
-				<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-		};
-
-		pinctrl_mmc0_cd: mmc0-cd {
-			atmel,pins =
-				<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-		};
-
-		/* Reserved for reset signal to the RGMII connector. */
-		pinctrl_rgmii_rstn: rgmii-rstn {
-			atmel,pins =
-				<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-		};
-
-		/* Reserved for an interrupt line from the RMII and RGMII connectors. */
-		pinctrl_spi_irqn: spi-irqn {
-			atmel,pins =
-				<AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-		};
-
-		pinctrl_spi0_cs: spi0-cs-default {
-			atmel,pins =
-				<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-				 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_spi1_cs: spi1-cs-default {
-			atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-				      AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_usba_vbus: usba-vbus {
-			atmel,pins =
-				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-		};
-
-		pinctrl_usb_default: usb-default {
-			atmel,pins =
-				<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-				 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-
-		/* Reserved for VBUS fault interrupt. */
-		pinctrl_vbusfault_irqn: vbusfault-irqn {
-			atmel,pins =
-				<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-		};
-
-		pinctrl_vcc_mmc0_reg_gpio: vcc-mmc0-reg-gpio-default {
-			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-		};
-	};
-};
-
-&slow_xtal {
-	clock-frequency = <32768>;
-};
-
-&spi0 {
-	pinctrl-names = "default", "cs";
-	pinctrl-1 = <&pinctrl_spi0_cs>;
-	cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-names = "default", "cs";
-	pinctrl-1 = <&pinctrl_spi1_cs>;
-	cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioC 28 0>;
-	status = "okay";
-};
-
-&tcb0 {
-	timer0: timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
-
-	timer1: timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
-};
-
-&usb0 {	/* USB Device port with VBUS detection. */
-	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usba_vbus>;
-	status = "okay";
-};
-
-&usb1 {	/* 3-port Host. First port is unused. */
-	atmel,vbus-gpio = <0
-			   &pioE 3 GPIO_ACTIVE_HIGH
-			   &pioE 4 GPIO_ACTIVE_HIGH
-			  >;
-	num-ports = <3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_default>;
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
deleted file mode 100644
index 14af1fd6d247d..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
+++ /dev/null
@@ -1,214 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2021 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-/dts-v1/;
-#include "sama5d36.dtsi"
-
-/ {
-	model = "EVB-KSZ9477";
-	compatible = "microchip,sama5d3-ksz9477-evb", "atmel,sama5d36",
-		     "atmel,sama5d3", "atmel,sama5";
-
-	chosen {
-		stdout-path = &dbgu;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_vcc_mmc0: regulator-mmc0 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mcc0_vcc>;
-		regulator-name = "mmc0-vcc";
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-0 = <&pinctrl_i2c0_pu>;
-	status = "okay";
-};
-
-&macb0 {
-	phy-mode = "rgmii";
-	status = "okay";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&main_xtal {
-	clock-frequency = <12000000>;
-};
-
-&mmc0 {
-	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
-		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
-	status = "okay";
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
-		disable-wp;
-		vmmc-supply = <&reg_vcc_mmc0>;
-		vqmmc-supply = <&reg_3v3>;
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@3 {
-		reg = <0x3 0x0 0x2>;
-		atmel,rb = <0>;
-		nand-bus-width = <8>;
-		nand-ecc-mode = "hw";
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-on-flash-bbt;
-		label = "atmel_nand";
-	};
-};
-
-&slow_xtal {
-	clock-frequency = <32768>;
-};
-
-&spi0 {
-	cs-gpios = <&pioD 13 GPIO_ACTIVE_LOW>, <0>, <0>,
-		   <&pioD 16 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-0 = <&pinctrl_spi_ksz>;
-	cs-gpios = <&pioC 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	switch@0 {
-		compatible = "microchip,ksz9477";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		spi-cpha;
-		spi-cpol;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-				phy-mode = "internal";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-				phy-mode = "internal";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-				phy-mode = "internal";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-				phy-mode = "internal";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan5";
-				phy-mode = "internal";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-				ethernet = <&macb0>;
-				phy-mode = "rgmii-txid";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usba_vbus>;
-	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&pinctrl {
-	board {
-		pinctrl_i2c0_pu: i2c0-pu {
-			atmel,pins =
-				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-		};
-
-		pinctrl_mmc0_cd: mmc0-cd {
-			atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_mcc0_vcc: mmc0-vcc {
-			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_spi_ksz: spi-ksz {
-			atmel,pins =
-				<
-				/* SPI1_MISO */
-				AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-				/* SPI1_MOSI */
-				AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE
-				/* SPI1_SPCK */
-				AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE
-
-				/* SPI CS */
-				AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-				/* switch IRQ */
-				AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH
-				/* switch PME_N, SoC IN */
-				AT91_PIOC 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
-				/* switch RST */
-				AT91_PIOC 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH
-				>;
-		};
-
-		pinctrl_usba_vbus: usba-vbus {
-			atmel,pins =
-				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
deleted file mode 100644
index 8200337270882..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ /dev/null
@@ -1,406 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
- *
- *  Copyright (C) 2014 Atmel,
- *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-/dts-v1/;
-#include "sama5d36.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "SAMA5D3 Xplained";
-	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			mmc0: mmc@f0000000 {
-				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
-				vmmc-supply = <&vcc_mmc0_reg>;
-				vqmmc-supply = <&vcc_3v3_reg>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <8>;
-					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
-				};
-			};
-
-			mmc1: mmc@f8000000 {
-				vmmc-supply = <&vcc_3v3_reg>;
-				vqmmc-supply = <&vcc_3v3_reg>;
-				status = "disabled";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
-				};
-			};
-
-			spi0: spi@f0004000 {
-				pinctrl-names = "default", "cs";
-				pinctrl-1 = <&pinctrl_spi0_cs>;
-				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
-				status = "okay";
-			};
-
-			can0: can@f000c000 {
-				status = "okay";
-			};
-
-			tcb0: timer@f0010000 {
-				timer0: timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer1: timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			i2c0: i2c@f0014000 {
-				pinctrl-0 = <&pinctrl_i2c0_pu>;
-				status = "okay";
-			};
-
-			i2c1: i2c@f0018000 {
-				status = "okay";
-
-				pmic: act8865@5b {
-					compatible = "active-semi,act8865";
-					reg = <0x5b>;
-					status = "disabled";
-
-					regulators {
-						vcc_1v8_reg: DCDC_REG1 {
-							regulator-name = "VCC_1V8";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <1800000>;
-							regulator-always-on;
-						};
-
-						vcc_1v2_reg: DCDC_REG2 {
-							regulator-name = "VCC_1V2";
-							regulator-min-microvolt = <1200000>;
-							regulator-max-microvolt = <1200000>;
-							regulator-always-on;
-						};
-
-						vcc_3v3_reg: DCDC_REG3 {
-							regulator-name = "VCC_3V3";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						vddfuse_reg: LDO_REG1 {
-							regulator-name = "FUSE_2V5";
-							regulator-min-microvolt = <2500000>;
-							regulator-max-microvolt = <2500000>;
-						};
-
-						vddana_reg: LDO_REG2 {
-							regulator-name = "VDDANA";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-					};
-				};
-			};
-
-			macb0: ethernet@f0028000 {
-				phy-mode = "rgmii-rxid";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "okay";
-
-				ethernet-phy@7 {
-					reg = <0x7>;
-				};
-			};
-
-			pwm0: pwm@f002c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
-				status = "okay";
-			};
-
-			usart0: serial@f001c000 {
-				status = "okay";
-			};
-
-			usart1: serial@f0020000 {
-				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
-				status = "okay";
-			};
-
-			uart0: serial@f0024000 {
-				status = "okay";
-			};
-
-			mmc1: mmc@f8000000 {
-				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			spi1: spi@f8008000 {
-				pinctrl-names = "default", "cs";
-				pinctrl-1 = <&pinctrl_spi1_cs>;
-				cs-gpios = <&pioC 25 0>;
-				status = "okay";
-			};
-
-			adc0: adc@f8018000 {
-				atmel,adc-vref = <3300>;
-				atmel,adc-channels-used = <0xfe>;
-				pinctrl-0 = <
-					&pinctrl_adc0_adtrg
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					&pinctrl_adc0_ad5
-					&pinctrl_adc0_ad6
-					&pinctrl_adc0_ad7
-					>;
-				status = "okay";
-			};
-
-			i2c2: i2c@f801c000 {
-				dmas = <0>, <0>;	/* Do not use DMA for i2c2 */
-				pinctrl-0 = <&pinctrl_i2c2_pu>;
-				status = "okay";
-			};
-
-			macb1: ethernet@f802c000 {
-				phy-mode = "rmii";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "okay";
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-				};
-			};
-
-			dbgu: serial@ffffee00 {
-				status = "okay";
-			};
-
-			pinctrl@fffff200 {
-				board {
-					pinctrl_i2c0_pu: i2c0_pu {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_i2c2_pu: i2c2_pu {
-						atmel,pins =
-							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_key_gpio: key_gpio_0 {
-						atmel,pins =
-							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-
-					pinctrl_mmc0_cd: mmc0_cd {
-						atmel,pins =
-							<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-
-					pinctrl_mmc1_cd: mmc1_cd {
-						atmel,pins =
-							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
-					};
-					pinctrl_usb_default: usb_default {
-						atmel,pins =
-							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_gpio_leds: gpio_leds_default {
-						atmel,pins =
-							<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-							 AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_spi0_cs: spi0_cs_default {
-						atmel,pins =
-							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-							 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_spi1_cs: spi1_cs_default {
-						atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
-						atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-				};
-			};
-		};
-
-		usb0: gadget@500000 {
-			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-
-		usb1: ohci@600000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0
-					   &pioE 3 GPIO_ACTIVE_LOW
-					   &pioE 4 GPIO_ACTIVE_LOW
-					  >;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_default>;
-			status = "okay";
-		};
-
-		usb2: ehci@700000 {
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-
-				nand@3 {
-					reg = <0x3 0x0 0x2>;
-					atmel,rb = <0>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-ecc-strength = <4>;
-					nand-ecc-step-size = <512>;
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						bootloader@40000 {
-							label = "bootloader";
-							reg = <0x40000 0xc0000>;
-						};
-
-						bootloaderenvred@100000 {
-							label = "bootloader env redundant";
-							reg = <0x100000 0x40000>;
-						};
-
-						bootloaderenv@140000 {
-							label = "bootloader env";
-							reg = <0x140000 0x40000>;
-						};
-
-						dtb@180000 {
-							label = "device tree";
-							reg = <0x180000 0x80000>;
-						};
-
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
-						};
-
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	vcc_mmc0_reg: fixedregulator_mmc0 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
-		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
-		regulator-name = "mmc0-card-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio>;
-
-		button {
-			label = "PB_USER";
-			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-		status = "okay";
-
-		led-d2 {
-			label = "d2";
-			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-d3 {
-			label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */
-			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
deleted file mode 100644
index fd1086f52b404..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- */
-
-#include "sama5d4.dtsi"
-
-/ {
-	model = "Aries/DENX MA5D4";
-	compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
-
-	memory@20000000 {
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-
-		clk20m: clk20m {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <20000000>;
-			clock-output-names = "clk20m";
-		};
-	};
-
-	ahb {
-		apb {
-			mmc0: mmc@f8000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
-				vmmc-supply = <&vcc_mmc0_reg>;
-				vqmmc-supply = <&vcc_3v3_reg>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <8>;
-					broken-cd;
-				};
-			};
-
-			spi0: spi@f8010000 {
-				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
-				status = "okay";
-
-				flash@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			i2c0: i2c@f8014000 {
-				status = "okay";
-			};
-
-			spi1: spi@fc018000 {
-				cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>;
-				status = "okay";
-
-				can0: can@0 {
-					compatible = "microchip,mcp2515";
-					reg = <0>;
-					clocks = <&clk20m>;
-					interrupt-parent = <&pioE>;
-					interrupts = <6 IRQ_TYPE_EDGE_RISING>;
-					spi-max-frequency = <10000000>;
-				};
-
-				can1: can@1 {
-					compatible = "microchip,mcp2515";
-					reg = <1>;
-					clocks = <&clk20m>;
-					interrupt-parent = <&pioE>;
-					interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-					spi-max-frequency = <10000000>;
-				};
-			};
-
-			tcb2: timer@fc024000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			adc0: adc@fc034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <
-					/* external trigger conflicts with USBA_VBUS */
-					&pinctrl_adc0_ad0
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					>;
-				atmel,adc-vref = <3300>;
-				status = "okay";
-			};
-
-			watchdog@fc068640 {
-				status = "okay";
-			};
-		};
-	};
-
-	vcc_3v3_reg: fixedregulator_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC 3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_mmc0_reg: fixedregulator_mmc0 {
-		compatible = "regulator-fixed";
-		gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
-		regulator-name = "RST_n MCI0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_3v3_reg>;
-		regulator-boot-on;
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
deleted file mode 100644
index 8adf567f2f0fe..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "at91-sama5d4_ma5d4.dtsi"
-
-/ {
-	model = "Aries/DENX MA5D4EVK";
-	compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial3:115200n8";
-	};
-
-	ahb {
-		usb0: gadget@400000 {
-			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-
-		usb1: ohci@500000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0
-					   &pioE 11 GPIO_ACTIVE_LOW
-					   &pioE 14 GPIO_ACTIVE_LOW
-					  >;
-			status = "okay";
-		};
-
-		usb2: ehci@600000 {
-			status = "okay";
-		};
-
-		apb {
-			hlcdc: hlcdc@f0000000 {
-				status = "okay";
-
-				hlcdc-display-controller {
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-
-					port@0 {
-						hlcdc_panel_output: endpoint@0 {
-							reg = <0>;
-							remote-endpoint = <&panel_input>;
-						};
-					};
-				};
-
-			};
-
-			macb0: ethernet@f8020000 {
-				phy-mode = "rmii";
-				status = "okay";
-
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-			};
-
-			usart0: serial@f802c000 {
-				status = "okay";
-			};
-
-			usart1: serial@f8030000 {
-				status = "okay";
-			};
-
-			mmc1: mmc@fc000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
-				vmmc-supply = <&vcc_mmc1_reg>;
-				vqmmc-supply = <&vcc_3v3_reg>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 5 0>;
-				};
-			};
-
-			adc0: adc@fc034000 {
-				atmel,adc-ts-wires = <4>;
-				atmel,adc-ts-pressure-threshold = <10000>;
-			};
-
-
-			pinctrl@fc06a000 {
-				board {
-					pinctrl_mmc1_cd: mmc1_cd {
-						atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-					};
-				};
-			};
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 50000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led-user1 {
-			label = "user1";
-			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-user2 {
-			label = "user2";
-			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-user3 {
-			label = "user3";
-			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	panel: panel {
-		/* Actually Ampire 800480R2 */
-		compatible = "foxlink,fl500wvr00-a0t";
-		backlight = <&backlight>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&hlcdc_panel_output>;
-			};
-		};
-	};
-
-	vcc_mmc1_reg: fixedregulator_mmc1 {
-		compatible = "regulator-fixed";
-		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
-		regulator-name = "VDD MCI1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_3v3_reg>;
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
deleted file mode 100644
index 95d701d13fef6..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ /dev/null
@@ -1,298 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
- *
- *  Copyright (C) 2015 Atmel,
- *                2015 Josh Wu <josh.wu@atmel.com>
- */
-/dts-v1/;
-#include "sama5d4.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Atmel SAMA5D4 Xplained";
-	compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x20000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			uart0: serial@f8004000 {
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "okay";
-			};
-
-			i2c0: i2c@f8014000 {
-				i2c-digital-filter;
-				status = "okay";
-			};
-
-			macb0: ethernet@f8020000 {
-				phy-mode = "rmii";
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
-
-				phy0: ethernet-phy@1 {
-					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-					reg = <1>;
-				};
-			};
-
-			mmc1: mmc@fc000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
-				vmmc-supply = <&vcc_mmc1_reg>;
-				vqmmc-supply = <&vcc_3v3_reg>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 3 0>;
-				};
-			};
-
-			usart3: serial@fc00c000 {
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "okay";
-			};
-
-			usart4: serial@fc010000 {
-				status = "okay";
-			};
-
-			spi1: spi@fc018000 {
-				pinctrl-names = "default", "cs";
-				pinctrl-1 = <&pinctrl_spi1_cs>;
-				cs-gpios = <&pioB 21 0>;
-				status = "okay";
-			};
-
-			tcb2: timer@fc024000 {
-				timer0: timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer1: timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			adc0: adc@fc034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <
-					/* external trigger conflicts with USBA_VBUS */
-					&pinctrl_adc0_ad0
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					>;
-				atmel,adc-vref = <3300>;
-				status = "okay";
-			};
-
-			watchdog@fc068640 {
-				status = "okay";
-			};
-
-			pinctrl@fc06a000 {
-				board {
-					pinctrl_mmc1_cd: mmc1_cd {
-						atmel,pins =
-							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-					};
-					pinctrl_usb_default: usb_default {
-						atmel,pins =
-							<AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-							 AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_key_gpio: key_gpio_0 {
-						atmel,pins =
-							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
-						atmel,pins =
-							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_spi1_cs: spi1_cs_default {
-						atmel,pins =
-							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_gpio_leds: gpio_leds_default {
-						atmel,pins =
-							<AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-							 AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
-						atmel,pins =
-							<AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-				};
-			};
-		};
-
-		usb0: gadget@400000 {
-			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-
-		usb1: ohci@500000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0
-					   &pioE 11 GPIO_ACTIVE_HIGH
-					   &pioE 14 GPIO_ACTIVE_HIGH
-					  >;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_default>;
-			status = "okay";
-		};
-
-		usb2: ehci@600000 {
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
-				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
-				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-
-				nand@3 {
-					reg = <0x3 0x0 0x2>;
-					atmel,rb = <0>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						bootloader@40000 {
-							label = "bootloader";
-							reg = <0x40000 0xc0000>;
-						};
-
-						bootloaderenvred@100000 {
-							label = "bootloader env redundant";
-							reg = <0x100000 0x40000>;
-						};
-
-						bootloaderenv@140000 {
-							label = "bootloader env";
-							reg = <0x140000 0x40000>;
-						};
-
-						dtb@180000 {
-							label = "device tree";
-							reg = <0x180000 0x80000>;
-						};
-
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
-						};
-
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x1f800000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio>;
-
-		button {
-			label = "pb_user1";
-			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-		status = "okay";
-
-		led-d8 {
-			label = "d8";
-			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led-d10 {
-			label = "d10";
-			gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	vcc_3v3_reg: fixedregulator_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC 3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_mmc1_reg: fixedregulator_mmc1 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
-		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
-		regulator-name = "VDD MCI1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_3v3_reg>;
-		regulator-always-on;
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
deleted file mode 100644
index 20ac775059ca4..0000000000000
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ /dev/null
@@ -1,323 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
- *
- *  Copyright (C) 2014 Atmel,
- *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-/dts-v1/;
-#include "sama5d4.dtsi"
-
-/ {
-	model = "Atmel SAMA5D4-EK";
-	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x20000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			adc0: adc@fc034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <
-					/* external trigger conflicts with USBA_VBUS */
-					&pinctrl_adc0_ad0
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					>;
-				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
-				atmel,adc-vref = <3300>;
-				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
-				status = "okay";		/* Enable ADC IIO support */
-			};
-
-			mmc0: mmc@f8000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 5 0>;
-				};
-			};
-
-			ssc0: ssc@f8008000 {
-				status = "okay";
-			};
-
-			spi0: spi@f8010000 {
-				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
-				status = "okay";
-				flash@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			i2c0: i2c@f8014000 {
-				status = "okay";
-
-				wm8904: codec@1a {
-					compatible = "wlf,wm8904";
-					reg = <0x1a>;
-					clocks = <&pmc PMC_TYPE_SYSTEM 10>;
-					clock-names = "mclk";
-				};
-
-				qt1070:keyboard@1b {
-					compatible = "qt1070";
-					reg = <0x1b>;
-					interrupt-parent = <&pioE>;
-					interrupts = <25 0x0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_qt1070_irq>;
-					wakeup-source;
-				};
-
-				touchscreen@4c {
-					compatible = "atmel,maxtouch";
-					reg = <0x4c>;
-					interrupt-parent = <&pioE>;
-					interrupts = <24 0x0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_mxt_ts>;
-				};
-			};
-
-			macb0: ethernet@f8020000 {
-				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
-				phy-mode = "rmii";
-				status = "okay";
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
-
-			mmc1: mmc@fc000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 6 0>;
-				};
-			};
-
-			usart2: serial@fc008000 {
-				status = "okay";
-			};
-
-			usart3: serial@fc00c000 {
-				status = "okay";
-			};
-
-			usart4: serial@fc010000 {
-				status = "okay";
-			};
-
-			tcb2: timer@fc024000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			watchdog@fc068640 {
-				status = "okay";
-			};
-
-			pinctrl@fc06a000 {
-				board {
-					pinctrl_macb0_phy_irq: macb0_phy_irq {
-						atmel,pins =
-							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_mmc0_cd: mmc0_cd {
-						atmel,pins =
-							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_mmc1_cd: mmc1_cd {
-						atmel,pins =
-							<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
-						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-					};
-					pinctrl_key_gpio: key_gpio_0 {
-						atmel,pins =
-							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
-					};
-					pinctrl_qt1070_irq: qt1070_irq {
-						atmel,pins =
-							<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_mxt_ts: mxt_irq {
-						atmel,pins =
-							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-				};
-			};
-		};
-
-		usb0: gadget@400000 {
-			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-
-		usb1: ohci@500000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
-					   &pioE 11 GPIO_ACTIVE_LOW
-					   &pioE 12 GPIO_ACTIVE_LOW
-					  >;
-			status = "okay";
-		};
-
-		usb2: ehci@600000 {
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
-				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
-				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-
-				nand@3 {
-					reg = <0x3 0x0 0x2>;
-					atmel,rb = <0>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						bootloader@40000 {
-							label = "bootloader";
-							reg = <0x40000 0x80000>;
-						};
-
-						bootloaderenv@c0000 {
-							label = "bootloader env";
-							reg = <0xc0000 0xc0000>;
-						};
-
-						dtb@180000 {
-							label = "device tree";
-							reg = <0x180000 0x80000>;
-						};
-
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
-						};
-
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio>;
-
-		button {
-			label = "pb_user1";
-			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led-d8 {
-			label = "d8";
-			/* PE28, conflicts with usart4 rts pin */
-			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
-		};
-
-		led-d9 {
-			label = "d9";
-			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-d10 {
-			label = "d10";
-			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "atmel,asoc-wm8904";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
-
-		atmel,model = "wm8904 @ SAMA5D4EK";
-		atmel,audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"IN1L", "Line In Jack",
-			"IN1R", "Line In Jack";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8904>;
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
deleted file mode 100644
index 217e9b96c61e5..0000000000000
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ /dev/null
@@ -1,834 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- *  at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
- *
- *  Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
- *
- *  Author: Eugen Hristev <eugen.hristev@microchip.com>
- *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
- *
- */
-/dts-v1/;
-#include "sama7g5-pinfunc.h"
-#include "sama7g5.dtsi"
-#include <dt-bindings/mfd/atmel-flexcom.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/sound/microchip,pdmc.h>
-
-/ {
-	model = "Microchip SAMA7G5-EK";
-	compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
-
-	chosen {
-		bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart3;
-		serial1 = &uart4;
-		serial2 = &uart7;
-		serial3 = &uart0;
-		i2c0 = &i2c1;
-		i2c1 = &i2c8;
-		i2c2 = &i2c9;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio_default>;
-
-		button {
-			label = "PB_USER";
-			gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led_gpio_default>;
-		status = "okay"; /* Conflict with pwm. */
-
-		red_led {
-			label = "red";
-			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
-		};
-
-		green_led {
-			label = "green";
-			gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
-		};
-
-		blue_led {
-			label = "blue";
-			gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	/* 512 M */
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x20000000>;
-	};
-
-	sound: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "sama7g5ek audio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		simple-audio-card,dai-link@0 {
-			reg = <0>;
-			cpu {
-				sound-dai = <&spdiftx>;
-			};
-			codec {
-				sound-dai = <&spdif_out>;
-			};
-		};
-		simple-audio-card,dai-link@1 {
-			reg = <1>;
-			cpu {
-				sound-dai = <&spdifrx>;
-			};
-			codec {
-				sound-dai = <&spdif_in>;
-			};
-		};
-	};
-
-	spdif_in: spdif-in {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dir";
-	};
-
-	spdif_out: spdif-out {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dit";
-	};
-};
-
-&adc {
-	vddana-supply = <&vddout25>;
-	vref-supply = <&vddout25>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
-	status = "okay";
-};
-
-&can0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can0_default>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1_default>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu-supply = <&vddcpu>;
-};
-
-&qspi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi>;
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <133000000>;
-		spi-tx-bus-width = <8>;
-		spi-rx-bus-width = <8>;
-		m25p,fast-read;
-
-		at91bootstrap@0 {
-			label = "ospi: at91bootstrap";
-			reg = <0x0 0x40000>;
-		};
-
-		bootloader@40000 {
-			label = "ospi: bootloader";
-			reg = <0x40000 0xc0000>;
-		};
-
-		bootloaderenvred@100000 {
-			label = "ospi: bootloader env redundant";
-			reg = <0x100000 0x40000>;
-		};
-
-		bootloaderenv@140000 {
-			label = "ospi: bootloader env";
-			reg = <0x140000 0x40000>;
-		};
-
-		dtb@180000 {
-			label = "ospi: device tree";
-			reg = <0x180000 0x80000>;
-		};
-
-		kernel@200000 {
-			label = "ospi: kernel";
-			reg = <0x200000 0x600000>;
-		};
-
-		rootfs@800000 {
-			label = "ospi: rootfs";
-			reg = <0x800000 0x7800000>;
-		};
-
-	};
-};
-
-&dma0 {
-	status = "okay";
-};
-
-&dma1 {
-	status = "okay";
-};
-
-&dma2 {
-	status = "okay";
-};
-
-&flx0 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "disabled";
-
-	uart0: serial@200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx0_default>;
-		status = "disabled";
-	};
-};
-
-&flx1 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c1: i2c@600 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1_default>;
-		i2c-analog-filter;
-		i2c-digital-filter;
-		i2c-digital-filter-width-ns = <35>;
-		status = "okay";
-
-		mcp16502@5b {
-			compatible = "microchip,mcp16502";
-			reg = <0x5b>;
-			status = "okay";
-
-			regulators {
-				vdd_3v3: VDD_IO {
-					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-initial-mode = <2>;
-					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-						regulator-suspend-microvolt = <3300000>;
-						regulator-mode = <4>;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-						regulator-mode = <4>;
-					};
-				};
-
-				vddioddr: VDD_DDR {
-					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-initial-mode = <2>;
-					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-						regulator-suspend-microvolt = <1350000>;
-						regulator-mode = <4>;
-					};
-
-					regulator-state-mem {
-						regulator-on-in-suspend;
-						regulator-suspend-microvolt = <1350000>;
-						regulator-mode = <4>;
-					};
-				};
-
-				vddcore: VDD_CORE {
-					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-initial-mode = <2>;
-					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1150000>;
-						regulator-mode = <4>;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-						regulator-mode = <4>;
-					};
-				};
-
-				vddcpu: VDD_OTHER {
-					regulator-name = "VDD_OTHER";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-initial-mode = <2>;
-					regulator-allowed-modes = <2>, <4>;
-					regulator-ramp-delay = <3125>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1050000>;
-						regulator-mode = <4>;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-						regulator-mode = <4>;
-					};
-				};
-
-				vldo1: LDO1 {
-					regulator-name = "LDO1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-suspend-voltage = <1800000>;
-						regulator-on-in-suspend;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				vldo2: LDO2 {
-					regulator-name = "LDO2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
-
-					regulator-state-standby {
-						regulator-suspend-voltage = <1800000>;
-						regulator-on-in-suspend;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-			};
-		};
-	};
-};
-
-&flx3 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	uart3: serial@200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx3_default>;
-		status = "okay";
-	};
-};
-
-&flx4 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	uart4: serial@200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx4_default>;
-		status = "okay";
-	};
-};
-
-&flx7 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	uart7: serial@200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx7_default>;
-		status = "okay";
-	};
-};
-
-&flx8 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c8: i2c@600 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c8_default>;
-		i2c-analog-filter;
-		i2c-digital-filter;
-		i2c-digital-filter-width-ns = <35>;
-		status = "okay";
-	};
-};
-
-&flx9 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c9: i2c@600 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c9_default>;
-		i2c-analog-filter;
-		i2c-digital-filter;
-		i2c-digital-filter-width-ns = <35>;
-		status = "okay";
-	};
-};
-
-&flx11 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
-	status = "okay";
-
-	spi11: spi@400 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
-		status = "okay";
-	};
-};
-
-&gmac0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gmac0_default
-		     &pinctrl_gmac0_mdio_default
-		     &pinctrl_gmac0_txck_default
-		     &pinctrl_gmac0_phy_irq>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-
-	ethernet-phy@7 {
-		reg = <0x7>;
-		interrupt-parent = <&pioA>;
-		interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&gmac1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gmac1_default
-		     &pinctrl_gmac1_mdio_default
-		     &pinctrl_gmac1_phy_irq>;
-	phy-mode = "rmii";
-	status = "okay"; /* Conflict with pdmc0. */
-
-	ethernet-phy@0 {
-		reg = <0x0>;
-		interrupt-parent = <&pioA>;
-		interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&i2s0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2s0_default>;
-};
-
-&pdmc0 {
-	#sound-dai-cells = <0>;
-	microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */
-			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 2 */
-			    <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>, /* MIC 3 */
-			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>; /* MIC 4 */
-	status = "disabled"; /* Conflict with gmac1. */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pdmc0_default>;
-};
-
-&pioA {
-
-	pinctrl_can0_default: can0_default {
-		pinmux = <PIN_PD12__CANTX0>,
-			 <PIN_PD13__CANRX0 >;
-		bias-disable;
-	};
-
-	pinctrl_can1_default: can1_default {
-		pinmux = <PIN_PD14__CANTX1>,
-			 <PIN_PD15__CANRX1 >;
-		bias-disable;
-	};
-
-	pinctrl_flx0_default: flx0_default {
-		pinmux = <PIN_PE3__FLEXCOM0_IO0>,
-			 <PIN_PE4__FLEXCOM0_IO1>,
-			 <PIN_PE6__FLEXCOM0_IO3>,
-			 <PIN_PE7__FLEXCOM0_IO4>;
-		bias-disable;
-	};
-
-	pinctrl_flx3_default: flx3_default {
-		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
-			 <PIN_PD17__FLEXCOM3_IO1>;
-		bias-pull-up;
-	};
-
-	pinctrl_flx4_default: flx4_default {
-		pinmux = <PIN_PD18__FLEXCOM4_IO0>,
-			 <PIN_PD19__FLEXCOM4_IO1>;
-		bias-disable;
-	};
-
-	pinctrl_flx7_default: flx7_default {
-		pinmux = <PIN_PC23__FLEXCOM7_IO0>,
-			 <PIN_PC24__FLEXCOM7_IO1>;
-		bias-disable;
-	};
-
-	pinctrl_gmac0_default: gmac0_default {
-		pinmux = <PIN_PA16__G0_TX0>,
-			 <PIN_PA17__G0_TX1>,
-			 <PIN_PA26__G0_TX2>,
-			 <PIN_PA27__G0_TX3>,
-			 <PIN_PA19__G0_RX0>,
-			 <PIN_PA20__G0_RX1>,
-			 <PIN_PA28__G0_RX2>,
-			 <PIN_PA29__G0_RX3>,
-			 <PIN_PA15__G0_TXEN>,
-			 <PIN_PA30__G0_RXCK>,
-			 <PIN_PA18__G0_RXDV>,
-			 <PIN_PA25__G0_125CK>;
-		slew-rate = <0>;
-		bias-disable;
-	};
-
-	pinctrl_gmac0_mdio_default: gmac0_mdio_default {
-		pinmux = <PIN_PA22__G0_MDC>,
-			 <PIN_PA23__G0_MDIO>;
-		bias-disable;
-	};
-
-	pinctrl_gmac0_txck_default: gmac0_txck_default {
-		pinmux = <PIN_PA24__G0_TXCK>;
-		slew-rate = <0>;
-		bias-pull-up;
-	};
-
-	pinctrl_gmac0_phy_irq: gmac0_phy_irq {
-		pinmux = <PIN_PA31__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_gmac1_default: gmac1_default {
-		pinmux = <PIN_PD30__G1_TXCK>,
-			 <PIN_PD22__G1_TX0>,
-			 <PIN_PD23__G1_TX1>,
-			 <PIN_PD21__G1_TXEN>,
-			 <PIN_PD25__G1_RX0>,
-			 <PIN_PD26__G1_RX1>,
-			 <PIN_PD27__G1_RXER>,
-			 <PIN_PD24__G1_RXDV>;
-		slew-rate = <0>;
-		bias-disable;
-	};
-
-	pinctrl_gmac1_mdio_default: gmac1_mdio_default {
-		pinmux = <PIN_PD28__G1_MDC>,
-			 <PIN_PD29__G1_MDIO>;
-		bias-disable;
-	};
-
-	pinctrl_gmac1_phy_irq: gmac1_phy_irq {
-		pinmux = <PIN_PA21__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_i2c1_default: i2c1_default {
-		pinmux = <PIN_PC9__FLEXCOM1_IO0>,
-			 <PIN_PC10__FLEXCOM1_IO1>;
-		bias-disable;
-	};
-
-	pinctrl_i2c8_default: i2c8_default {
-		pinmux = <PIN_PC14__FLEXCOM8_IO0>,
-			 <PIN_PC13__FLEXCOM8_IO1>;
-		bias-disable;
-	};
-
-	pinctrl_i2c9_default: i2c9_default {
-		pinmux = <PIN_PC18__FLEXCOM9_IO0>,
-			 <PIN_PC19__FLEXCOM9_IO1>;
-		bias-disable;
-	};
-
-	pinctrl_i2s0_default: i2s0_default {
-		pinmux = <PIN_PB23__I2SMCC0_CK>,
-			 <PIN_PB24__I2SMCC0_WS>,
-			 <PIN_PB25__I2SMCC0_DOUT1>,
-			 <PIN_PB26__I2SMCC0_DOUT0>,
-			 <PIN_PB27__I2SMCC0_MCK>;
-		bias-disable;
-	};
-
-	pinctrl_key_gpio_default: key_gpio_default {
-		pinmux = <PIN_PA12__GPIO>;
-		bias-pull-up;
-	};
-
-	pinctrl_led_gpio_default: led_gpio_default {
-		pinmux = <PIN_PA13__GPIO>,
-			 <PIN_PB8__GPIO>,
-			 <PIN_PD20__GPIO>;
-		bias-pull-up;
-	};
-
-	pinctrl_mikrobus1_an_default: mikrobus1_an_default {
-		pinmux = <PIN_PD0__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus2_an_default: mikrobus2_an_default {
-		pinmux = <PIN_PD1__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
-		pinmux = <PIN_PA13__PWMH2>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
-		pinmux = <PIN_PD20__PWMH3>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
-		pinmux = <PIN_PB6__FLEXCOM11_IO3>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus1_spi: mikrobus1_spi {
-		pinmux = <PIN_PB3__FLEXCOM11_IO0>,
-			 <PIN_PB4__FLEXCOM11_IO1>,
-			 <PIN_PB5__FLEXCOM11_IO2>;
-		bias-disable;
-	};
-
-	pinctrl_pdmc0_default: pdmc0_default {
-		pinmux = <PIN_PD23__PDMC0_DS0>,
-			 <PIN_PD24__PDMC0_DS1>,
-			 <PIN_PD22__PDMC0_CLK>;
-		bias_disable;
-	};
-
-	pinctrl_qspi: qspi {
-		pinmux = <PIN_PB12__QSPI0_IO0>,
-			 <PIN_PB11__QSPI0_IO1>,
-			 <PIN_PB10__QSPI0_IO2>,
-			 <PIN_PB9__QSPI0_IO3>,
-			 <PIN_PB16__QSPI0_IO4>,
-			 <PIN_PB17__QSPI0_IO5>,
-			 <PIN_PB18__QSPI0_IO6>,
-			 <PIN_PB19__QSPI0_IO7>,
-			 <PIN_PB13__QSPI0_CS>,
-			 <PIN_PB14__QSPI0_SCK>,
-			 <PIN_PB15__QSPI0_SCKN>,
-			 <PIN_PB20__QSPI0_DQS>,
-			 <PIN_PB21__QSPI0_INT>;
-		bias-disable;
-		slew-rate = <0>;
-		atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
-	};
-
-	pinctrl_sdmmc0_default: sdmmc0_default {
-		cmd_data {
-			pinmux = <PIN_PA1__SDMMC0_CMD>,
-				 <PIN_PA3__SDMMC0_DAT0>,
-				 <PIN_PA4__SDMMC0_DAT1>,
-				 <PIN_PA5__SDMMC0_DAT2>,
-				 <PIN_PA6__SDMMC0_DAT3>,
-				 <PIN_PA7__SDMMC0_DAT4>,
-				 <PIN_PA8__SDMMC0_DAT5>,
-				 <PIN_PA9__SDMMC0_DAT6>,
-				 <PIN_PA10__SDMMC0_DAT7>;
-			slew-rate = <0>;
-			bias-pull-up;
-		};
-
-		ck_cd_rstn_vddsel {
-			pinmux = <PIN_PA0__SDMMC0_CK>,
-				 <PIN_PA2__SDMMC0_RSTN>,
-				 <PIN_PA11__SDMMC0_DS>;
-			slew-rate = <0>;
-			bias-pull-up;
-		};
-	};
-
-	pinctrl_sdmmc1_default: sdmmc1_default {
-		cmd_data {
-			pinmux = <PIN_PB29__SDMMC1_CMD>,
-				 <PIN_PB31__SDMMC1_DAT0>,
-				 <PIN_PC0__SDMMC1_DAT1>,
-				 <PIN_PC1__SDMMC1_DAT2>,
-				 <PIN_PC2__SDMMC1_DAT3>;
-			slew-rate = <0>;
-			bias-pull-up;
-		};
-
-		ck_cd_rstn_vddsel {
-			pinmux = <PIN_PB30__SDMMC1_CK>,
-				 <PIN_PB28__SDMMC1_RSTN>,
-				 <PIN_PC5__SDMMC1_1V8SEL>,
-				 <PIN_PC4__SDMMC1_CD>;
-			slew-rate = <0>;
-			bias-pull-up;
-		};
-	};
-
-	pinctrl_sdmmc2_default: sdmmc2_default {
-		cmd_data {
-			pinmux = <PIN_PD3__SDMMC2_CMD>,
-				 <PIN_PD5__SDMMC2_DAT0>,
-				 <PIN_PD6__SDMMC2_DAT1>,
-				 <PIN_PD7__SDMMC2_DAT2>,
-				 <PIN_PD8__SDMMC2_DAT3>;
-			slew-rate = <0>;
-			bias-pull-up;
-		};
-
-		ck {
-			pinmux = <PIN_PD4__SDMMC2_CK>;
-			slew-rate = <0>;
-			bias-pull-up;
-		};
-	};
-
-	pinctrl_spdifrx_default: spdifrx_default {
-		pinmux = <PIN_PB0__SPDIF_RX>;
-		bias-disable;
-	};
-
-	pinctrl_spdiftx_default: spdiftx_default {
-		pinmux = <PIN_PB1__SPDIF_TX>;
-		bias-disable;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
-	status = "disabled"; /* Conflict with leds. */
-};
-
-&rtt {
-	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-};
-
-&sdmmc0 {
-	bus-width = <8>;
-	non-removable;
-	sdhci-caps-mask = <0x0 0x00200000>;
-	vmmc-supply = <&vdd_3v3>;
-	vqmmc-supply = <&vldo1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc0_default>;
-	status = "okay";
-};
-
-&sdmmc1 {
-	bus-width = <4>;
-	no-1-8-v;
-	sdhci-caps-mask = <0x0 0x00200000>;
-	vmmc-supply = <&vdd_3v3>;
-	vqmmc-supply = <&vdd_3v3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc1_default>;
-	status = "okay";
-};
-
-&sdmmc2 {
-	bus-width = <4>;
-	no-1-8-v;
-	sdhci-caps-mask = <0x0 0x00200000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc2_default>;
-};
-
-&shdwc {
-	debounce-delay-us = <976>;
-	status = "okay";
-
-	input@0 {
-		reg = <0>;
-	};
-};
-
-&spdifrx {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdifrx_default>;
-	status = "okay";
-};
-
-&spdiftx {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdiftx_default>;
-	status = "okay";
-};
-
-&tcb0 {
-	timer0: timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
-
-	timer1: timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
-};
-
-&trng {
-	status = "okay";
-};
-
-&vddout25 {
-	vin-supply = <&vdd_3v3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-smartkiz.dts b/arch/arm/boot/dts/at91-smartkiz.dts
deleted file mode 100644
index b76a6b5ac464d..0000000000000
--- a/arch/arm/boot/dts/at91-smartkiz.dts
+++ /dev/null
@@ -1,107 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017-2018 Overkiz SAS
- *   Author: Mickael Gardet <m.gardet@overkiz.com>
- *           Kévin Raymond <k.raymond@overkiz.com>
- *           Dorian Rocipon <d.rocipon@overkiz.com>
- */
-/dts-v1/;
-#include "at91-kizboxmini-common.dtsi"
-
-/ {
-	model = "Overkiz SmartKiz";
-	compatible = "overkiz,smartkiz", "atmel,at91sam9g25",
-		     "atmel,at91sam9x5", "atmel,at91sam9";
-
-	clocks {
-		adc_op_clk {
-			status = "okay";
-		};
-	};
-
-	aliases {
-		serial5 = &uart0;
-	};
-
-	pio_keys {
-		hk_reset {
-			label = "HK_RESET";
-			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_rf {
-			label = "POWER_RF";
-			gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_wifi {
-			label = "POWER_WIFI";
-			gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pinctrl {
-	i2c1 {
-		pinctrl_i2c1: i2c1-0 {
-			atmel,pins =
-				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
-				AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
-		};
-	};
-
-	adc0 {
-		pinctrl_adc0_ad0: adc0_ad0-0 {
-			/* pull-up disable */
-			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-		pinctrl_adc0_ad5: adc0_ad5-0 {
-			/* pull-up disable */
-			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-		pinctrl_adc0_ad6: adc0_ad6-0 {
-			/* pull-up disable */
-			atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-		pinctrl_adc0_ad11: adc0_ad11-0 {
-			/* pull-up disable */
-			atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-};
-
-&i2c1 {
-	dmas = <0>, <0>;
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "disabled";
-};
-
-&macb0 {
-	status = "disabled";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&led_blue {
-	status = "okay";
-};
-
-&adc0 {
-	atmel,adc-vref = <2500>;
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pinctrl_adc0_ad0
-		&pinctrl_adc0_ad5
-		&pinctrl_adc0_ad6
-		&pinctrl_adc0_ad11
-	>;
-	atmel,adc-channels-used = <0x0861>;
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi
deleted file mode 100644
index 39474a112b16e..0000000000000
--- a/arch/arm/boot/dts/at91-som60.dtsi
+++ /dev/null
@@ -1,230 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-som60.dtsi - Device Tree file for the SOM60 module
- *
- *  Copyright (C) 2018 Laird,
- *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
- *
- */
-#include "sama5d36.dtsi"
-
-/ {
-	model = "Laird SOM60";
-	compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
-
-	chosen {
-		stdout-path = &dbgu;
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-};
-
-&pinctrl {
-	board {
-		pinctrl_mmc0_cd: mmc0_cd {
-			atmel,pins =
-				<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-		};
-
-		pinctrl_mmc0_en: mmc0_en {
-			atmel,pins =
-				<AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_nand0_wp: nand0_wp {
-			atmel,pins =
-				<AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-		};
-
-		pinctrl_usb_vbus: usb_vbus {
-			atmel,pins =
-				<AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-				/* Conflicts with USART2_SCK */
-		};
-
-		pinctrl_usart2_sck: usart2_sck {
-			atmel,pins =
-				<AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-				/* Conflicts with USB_VBUS */
-		};
-
-		pinctrl_usb_oc: usb_oc {
-			atmel,pins =
-				<AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-				/* Conflicts with USART3_SCK */
-		};
-
-		pinctrl_usart3_sck: usart3_sck {
-			atmel,pins =
-				<AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-				/* Conflicts with USB_OC */
-		};
-
-		pinctrl_usba_vbus: usba_vbus {
-		   atmel,pins =
-				<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-		};
-
-		pinctrl_geth_int: geth_int {
-			atmel,pins =
-				<AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-				/* Conflicts with USART1_SCK */
-		};
-
-		pinctrl_usart1_sck: usart1_sck {
-			atmel,pins =
-				<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-				/* Conflicts with GETH_INT */
-		};
-
-		pinctrl_eth_int: eth_int {
-			atmel,pins =
-				<AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-		};
-
-		pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
-			atmel,pins =
-				<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-		};
-	};
-};
-
-&mmc0 {
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
-};
-
-&spi0 {
-	cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
-};
-
-&usart0 {
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "okay";
-	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
-};
-
-&usart1 {
-	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
-};
-
-&usart2 {
-	pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>;
-};
-
-&usart3 {
-	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
-};
-
-&adc0 {
-	pinctrl-0 = <
-		&pinctrl_adc0_adtrg
-		&pinctrl_adc0_ad0
-		&pinctrl_adc0_ad1
-		&pinctrl_adc0_ad2
-		&pinctrl_adc0_ad3
-		&pinctrl_adc0_ad4
-		&pinctrl_adc0_ad5
-		>;
-};
-
-&macb0 {
-	phy-mode = "rgmii";
-};
-
-&macb1 {
-	phy-mode = "rmii";
-};
-
-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand: nand@3 {
-		reg = <0x3 0x0 0x2>;
-		atmel,rb = <0>;
-		nand-bus-width = <8>;
-		nand-ecc-mode = "hw";
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-on-flash-bbt;
-		label = "atmel_nand";
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ubootspl@0 {
-				label = "u-boot-spl";
-				reg = <0x0 0x20000>;
-			};
-
-			uboot@20000 {
-				label = "u-boot";
-				reg = <0x20000 0x80000>;
-			};
-
-			ubootenv@a0000 {
-				label = "u-boot-env";
-				reg = <0xa0000 0x20000>;
-			};
-
-			ubootenv@c0000 {
-				label = "u-boot-env";
-				reg = <0xc0000 0x20000>;
-			};
-
-			ubi@e0000 {
-				label = "ubi";
-				reg = <0xe0000 0xfe00000>;
-			};
-		};
-	};
-};
-
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usba_vbus>;
-	atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>;
-};
-
-&usb1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>;
-	num-ports = <3>;
-	atmel,vbus-gpio = <0
-		&pioE 20 GPIO_ACTIVE_HIGH
-		0>;
-	atmel,oc-gpio = <0
-		&pioE 15 GPIO_ACTIVE_LOW
-		0>;
-};
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
deleted file mode 100644
index b99a4fb44a364..0000000000000
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ /dev/null
@@ -1,302 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
- *
- * Copyright (C) 2017 Axentia Technologies AB
- *
- * Author: Peter Rosin <peda@axentia.se>
- */
-/dts-v1/;
-#include <dt-bindings/pwm/pwm.h>
-#include "at91-linea.dtsi"
-
-/ {
-	model = "Axentia TSE-850 3.0";
-	compatible = "axentia,tse850v3", "axentia,linea",
-		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
-	sck: oscillator {
-		compatible = "fixed-clock";
-
-		#clock-cells = <0>;
-		clock-frequency = <16000000>;
-		clock-output-names = "sck";
-	};
-
-	reg_3v3: regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "3v3-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	ana: reg-ana {
-		compatible = "pwm-regulator";
-
-		regulator-name = "ANA";
-
-		pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
-		pwm-dutycycle-unit = <1000>;
-		pwm-dutycycle-range = <100 1000>;
-
-		regulator-min-microvolt = <2000000>;
-		regulator-max-microvolt = <20000000>;
-		regulator-ramp-delay = <1000>;
-	};
-
-	sound {
-		compatible = "axentia,tse850-pcm5142";
-
-		axentia,cpu-dai = <&ssc0>;
-		axentia,audio-codec = <&pcm5142>;
-
-		axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
-		axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
-		axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
-
-		axentia,ana-supply = <&ana>;
-	};
-
-	dac: dpot-dac {
-		compatible = "dpot-dac";
-		vref-supply = <&reg_3v3>;
-		io-channels = <&dpot 0>;
-		io-channel-names = "dpot";
-		#io-channel-cells = <1>;
-	};
-
-	env_det: envelope-detector {
-		compatible = "axentia,tse850-envelope-detector";
-		io-channels = <&dac 0>;
-		io-channel-names = "dac";
-		#io-channel-cells = <1>;
-
-		interrupt-parent = <&pioA>;
-		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "comp";
-	};
-
-	mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
-			    <&pioA 1 GPIO_ACTIVE_HIGH>,
-			    <&pioA 2 GPIO_ACTIVE_HIGH>;
-		idle-state = <0>;
-	};
-
-	envelope-detector-mux {
-		compatible = "io-channel-mux";
-		io-channels = <&env_det 0>;
-		io-channel-names = "parent";
-
-		mux-controls = <&mux>;
-
-		channels = "", "",
-			 "sync-1",
-			 "in",
-			 "out",
-			 "sync-2",
-			 "sys-reg",
-			 "ana-reg";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-ch1-red {
-			label = "ch-1:red";
-			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
-		};
-		led-ch1-green {
-			label = "ch-1:green";
-			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
-		};
-		led-ch2-red {
-			label = "ch-2:red";
-			gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
-		};
-		led-ch2-green {
-			label = "ch-2:green";
-			gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
-		};
-		led-data-red {
-			label = "data:red";
-			gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
-		};
-		led-data-green {
-			label = "data:green";
-			gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
-		};
-		led-alarm-red {
-			label = "alarm:red";
-			gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
-		};
-		led-alarm-green {
-			label = "alarm:green";
-			gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&nand {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		at91bootstrap@0 {
-			label = "at91bootstrap";
-			reg = <0x0 0x40000>;
-		};
-
-		barebox@40000 {
-			label = "bootloader";
-			reg = <0x40000 0x60000>;
-		};
-
-		bareboxenv@c0000 {
-			label = "bareboxenv";
-			reg = <0xc0000 0x40000>;
-		};
-
-		bareboxenv2@100000 {
-			label = "bareboxenv2";
-			reg = <0x100000 0x40000>;
-		};
-
-		oftree@180000 {
-			label = "oftree";
-			reg = <0x180000 0x20000>;
-		};
-
-		kernel@200000 {
-			label = "kernel";
-			reg = <0x200000 0x500000>;
-		};
-
-		rootfs@800000 {
-			label = "rootfs";
-			reg = <0x800000 0x0f800000>;
-		};
-
-		ovlfs@10000000 {
-			label = "ovlfs";
-			reg = <0x10000000 0x10000000>;
-		};
-	};
-};
-
-&ssc0 {
-	#sound-dai-cells = <0>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	jc42@18 {
-		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
-		reg = <0x18>;
-		smbus-timeout-disable;
-	};
-
-	dpot: mcp4651-104@28 {
-		compatible = "microchip,mcp4651-104";
-		reg = <0x28>;
-		#io-channel-cells = <1>;
-	};
-
-	pcm5142: pcm5142@4c {
-		compatible = "ti,pcm5142";
-
-		reg = <0x4c>;
-		#sound-dai-cells = <0>;
-
-		AVDD-supply = <&reg_3v3>;
-		DVDD-supply = <&reg_3v3>;
-		CPVDD-supply = <&reg_3v3>;
-
-		clocks = <&sck>;
-
-		pll-in = <3>;
-		pll-out = <6>;
-	};
-
-	eeprom@50 {
-		compatible = "nxp,se97b", "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-&pinctrl {
-	tse850 {
-		pinctrl_usba_vbus: usba-vbus {
-			atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO
-				      AT91_PINCTRL_DEGLITCH>;
-		};
-	};
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&usart0 {
-	status = "okay";
-
-	atmel,use-dma-rx;
-};
-
-&pwm0 {
-	status = "okay";
-
-	pinctrl-0 = <&pinctrl_pwm0_pwml2_1>;
-	pinctrl-names = "default";
-};
-
-&macb1 {
-	status = "okay";
-
-	phy-mode = "rmii";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	phy0: ethernet-phy@3 {
-		reg = <3>;
-
-		interrupt-parent = <&pioE>;
-		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&usb0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usba_vbus>;
-	atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>;
-};
-
-&usb1 {
-	status = "okay";
-
-	num-ports = <1>;
-	atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
-	atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>;
-};
-
-&usb2 {
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-
-	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
-};
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
deleted file mode 100644
index ebeaa6ab500e4..0000000000000
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ /dev/null
@@ -1,231 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for VInCo platform
- *
- *  Copyright (C) 2014 Atmel,
- *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- *   2015 Gregory CLEMENT <gregory.clement@free-electrons.com>
- */
-/dts-v1/;
-#include "sama5d4.dtsi"
-
-/ {
-	model = "L+G VInCo platform";
-	compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-
-			adc0: adc@fc034000 {
-				status = "okay"; /* Enable ADC IIO support */
-			};
-
-			mmc0: mmc@f8000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
-					     &pinctrl_mmc0_dat1_3
-					     &pinctrl_mmc0_dat4_7>;
-				vqmmc-supply = <&vcc_3v3_reg>;
-				vmmc-supply = <&vcc_3v3_reg>;
-				no-1-8-v;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <8>;
-					non-removable;
-					broken-cd;
-					status = "okay";
-				};
-			};
-
-			spi0: spi@f8010000 {
-				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
-				status = "okay";
-				flash@0 {
-					compatible = "n25q32b", "jedec,spi-nor";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			i2c0: i2c@f8014000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@f8018000 {
-				status = "okay";
-				/* kerkey security module */
-			};
-
-			macb0: ethernet@f8020000 {
-				phy-mode = "rmii";
-				status = "okay";
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-					reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
-					interrupt-parent = <&pioB>;
-					interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-				};
-
-			};
-
-			i2c2: i2c@f8024000 {
-				status = "okay";
-
-				rtc1: rtc@32 {
-					compatible = "epson,rx8900";
-					reg = <0x32>;
-				};
-			};
-
-			usart2: serial@fc008000 {
-				/* MBUS */
-				status = "okay";
-			};
-
-			usart3: serial@fc00c000 {
-				/* debug */
-				status = "okay";
-			};
-
-			usart4: serial@fc010000 {
-				/* LMN */
-				pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>;
-				linux,rs485-enabled-at-boot-time;
-				status = "okay";
-			};
-
-			tcb2: timer@fc024000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			macb1: ethernet@fc028000 {
-				phy-mode = "rmii";
-				status = "okay";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "okay";
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-					interrupt-parent = <&pioB>;
-					interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-					reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
-				};
-			};
-
-			watchdog@fc068640 {
-				status = "okay";
-			};
-
-			pinctrl@fc06a000 {
-				board {
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-						<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-					};
-				};
-			};
-		};
-
-		usb0: gadget@400000 {
-			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "disable";
-		};
-
-		usb1: ohci@500000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0
-					   &pioE 11 GPIO_ACTIVE_LOW
-					   &pioE 12 GPIO_ACTIVE_LOW
-					  >;
-			status = "disable";
-		};
-
-		usb2: ehci@600000 {
-			/* 4G Modem */
-			status = "okay";
-		};
-
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led_err {
-			label = "err";
-			gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_rssi {
-			label = "rssi";
-			gpios = <&pioA 9 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_tls {
-			label = "tls";
-			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_lmc {
-			label = "lmc";
-			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_wmt {
-			label = "wmt";
-			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_pwr {
-			label = "pwr";
-			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-	};
-
-	vcc_3v3_reg: fixedregulator_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC 3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
deleted file mode 100644
index ef73f727f7bde..0000000000000
--- a/arch/arm/boot/dts/at91-wb45n.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-wb45n.dts - Device Tree file for WB45NBT board
- *
- *  Copyright (C) 2018 Laird
- *
- */
-/dts-v1/;
-#include "at91-wb45n.dtsi"
-
-/ {
-	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
-	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button {
-			label = "IRQBTN";
-			linux,code = <99>;
-			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-	};
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&mmc0 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-};
-
-&macb0 {
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&usart0 {
-	status = "okay";
-};
-
-&usart3 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-wb45n.dtsi b/arch/arm/boot/dts/at91-wb45n.dtsi
deleted file mode 100644
index 430c75358086f..0000000000000
--- a/arch/arm/boot/dts/at91-wb45n.dtsi
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-wb45n.dtsi - Device Tree file for WB45NBT board
- *
- *  Copyright (C) 2018 Laird
- *
- */
-
-#include "at91sam9g25.dtsi"
-
-/ {
-	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
-	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	atheros {
-		compatible = "atheros,ath6kl";
-		atheros,board-id = "SD32";
-	};
-};
-
-&reset_controller {
-	compatible = "atmel,sama5d3-rstc";
-};
-
-&shutdown_controller {
-	atmel,wakeup-mode = "low";
-};
-
-&slow_xtal {
-	clock-frequency = <32768>;
-};
-
-&main_xtal {
-	clock-frequency = <12000000>;
-};
-
-&ebi {
-	status = "okay";
-	nand_controller: nand-controller {
-		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		nand@3 {
-			reg = <0x3 0x0 0x800000>;
-			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <4>;
-			nand-ecc-step-size = <512>;
-			nand-on-flash-bbt;
-			label = "atmel_nand";
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				at91bootstrap@0 {
-					label = "at91bs";
-					reg = <0x0 0x20000>;
-				};
-
-				uboot@20000 {
-					label = "u-boot";
-					reg = <0x20000 0x80000>;
-				};
-
-				ubootenv@a0000 {
-					label = "u-boot-env";
-					reg = <0xa0000 0x20000>;
-				};
-
-				ubootenv@c0000 {
-					label = "redund-env";
-					reg = <0xc0000 0x20000>;
-				};
-
-				kernel-a@e0000 {
-					label = "kernel-a";
-					reg = <0xe0000 0x280000>;
-				};
-
-				kernel-b@360000 {
-					label = "kernel-b";
-					reg = <0x360000 0x280000>;
-				};
-
-				rootfs-a@5e0000 {
-					label = "rootfs-a";
-					reg = <0x5e0000 0x2600000>;
-				};
-
-				rootfs-b@2be0000 {
-					label = "rootfs-b";
-					reg = <0x2be0000 0x2600000>;
-				};
-
-				user@51e0000 {
-					label = "user";
-					reg = <0x51e0000 0x2dc0000>;
-				};
-
-				logs@7fa0000 {
-					label = "logs";
-					reg = <0x7fa0000 0x60000>;
-				};
-
-			};
-		};
-	};
-};
-
-&usb0 {
-	num-ports = <2>;
-	atmel,vbus-gpio = <
-		&pioB 12 GPIO_ACTIVE_HIGH
-		&pioA 31 GPIO_ACTIVE_HIGH
-		>;
-	atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
-};
-
-&macb0 {
-	phy-mode = "rmii";
-};
-
-&spi0 {
-	cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
-};
-
-&usb2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_board_usb2>;
-	atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pinctrl_mmc0_slot0_clk_cmd_dat0
-		&pinctrl_mmc0_slot0_dat1_3>;
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
-};
-
-&pinctrl {
-	usb2 {
-		pinctrl_board_usb2: usb2-board {
-			atmel,pins =
-				<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB11 gpio vbus sense, deglitch */
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
deleted file mode 100644
index ec2becf6133ba..0000000000000
--- a/arch/arm/boot/dts/at91-wb50n.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-wb50n.dts - Device Tree file for wb50n evaluation board
- *
- *  Copyright (C) 2018 Laird
- *
- */
-
-/dts-v1/;
-#include "at91-wb50n.dtsi"
-
-/ {
-	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
-	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-0 {
-			label = "BTNESC";
-			linux,code = <1>; /* ESC button */
-			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-
-		button-1 {
-			label = "IRQBTN";
-			linux,code = <99>; /* SysReq button */
-			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 {
-			label = "wb50n:blue:led0";
-			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led1 {
-			label = "wb50n:green:led1";
-			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "wb50n:red:led2";
-			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&mmc0 {
-	status = "okay";
-};
-
-&macb1 {
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-/* On BB40 this port is labeled UART1 */
-&usart0 {
-	status = "okay";
-};
-
-/* On BB40 this port is labeled UART0 */
-&usart1 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
-
diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi
deleted file mode 100644
index 74b249bb63519..0000000000000
--- a/arch/arm/boot/dts/at91-wb50n.dtsi
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module
- *
- *  Copyright (C) 2018 Laird
- *
- */
-
-#include "sama5d31.dtsi"
-
-/ {
-	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
-	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
-	chosen {
-		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-};
-
-&pinctrl {
-	board {
-		pinctrl_mmc0_cd: mmc0_cd {
-			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
-		};
-
-		pinctrl_usba_vbus: usba_vbus {
-			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
-		};
-	};
-};
-
-&slow_xtal {
-	clock-frequency = <32768>;
-};
-
-&main_xtal {
-	clock-frequency = <12000000>;
-};
-
-&clk32k {
-	atmel,osc-bypass;
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
-	cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
-	status = "okay";
-	atheros@0 {
-		compatible = "atheros,ath6kl";
-		atheros,board-id = "SD32";
-		reg = <0>;
-		bus-width = <4>;
-	};
-};
-
-&macb1 {
-	phy-mode = "rmii";
-};
-
-&dbgu {
-	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
-};
-
-/* On BB40 this port is labeled UART1 */
-&usart0 {
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
-};
-
-/* On BB40 this port is labeled UART0 */
-&usart1 {
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
-	dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
-};
-
-/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
-&usart3 {
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
-	status = "okay";
-};
-
-&spi1 {
-	cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
-};
-
-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand: nand@3 {
-		reg = <0x3 0x0 0x2>;
-		atmel,rb = <0>;
-		nand-bus-width = <8>;
-		nand-ecc-mode = "hw";
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-on-flash-bbt;
-		label = "atmel_nand";
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			at91bootstrap@0 {
-				label = "at91bs";
-				reg = <0x0 0x20000>;
-			};
-
-			uboot@20000 {
-				label = "u-boot";
-				reg = <0x20000 0x80000>;
-			};
-
-			ubootenv@a0000 {
-				label = "u-boot-env";
-				reg = <0xa0000 0x20000>;
-			};
-
-			ubootenv@c0000 {
-				label = "u-boot-env";
-				reg = <0xc0000 0x20000>;
-			};
-
-			kernel-a@e0000 {
-				label = "kernel-a";
-				reg = <0xe0000 0x500000>;
-			};
-
-			kernel-b@5e0000 {
-				label = "kernel-b";
-				reg = <0x5e0000 0x500000>;
-			};
-
-			rootfs-a@ae0000 {
-				label = "rootfs-a";
-				reg = <0xae0000 0x3000000>;
-			};
-
-			rootfs-b@3ae0000 {
-				label = "rootfs-b";
-				reg = <0x3ae0000 0x3000000>;
-			};
-
-			user@6ae0000 {
-				label = "user";
-				reg = <0x6ae0000 0x14e0000>;
-			};
-		};
-	};
-};
-
-&usb0 {
-	atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usba_vbus>;
-};
-
-&usb1 {
-	num-ports = <3>;
-	atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
-	atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
deleted file mode 100644
index 6f9004ebf4245..0000000000000
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ /dev/null
@@ -1,729 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC
- *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
- *                2012 Joachim Eastwood <manabian@gmail.com>
- *
- * Based on at91sam9260.dtsi
- */
-
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-#include <dt-bindings/mfd/at91-usart.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Atmel AT91RM9200 family SoC";
-	compatible = "atmel,at91rm9200";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-		i2c0 = &i2c0;
-		ssc0 = &ssc0;
-		ssc1 = &ssc1;
-		ssc2 = &ssc2;
-	};
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm920t";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x04000000>;
-	};
-
-	clocks {
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	sram: sram@200000 {
-		compatible = "mmio-sram";
-		reg = <0x00200000 0x4000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x00200000 0x4000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <25 26 27 28 29 30 31>;
-			};
-
-			ramc0: ramc@ffffff00 {
-				compatible = "atmel,at91rm9200-sdramc", "syscon";
-				reg = <0xffffff00 0x100>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc", "syscon";
-				reg = <0xfffffc00 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				#clock-cells = <2>;
-				clocks = <&slow_xtal>, <&main_xtal>;
-				clock-names = "slow_xtal", "main_xtal";
-			};
-
-			st: timer@fffffd00 {
-				compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
-				reg = <0xfffffd00 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&slow_xtal>;
-
-				watchdog {
-					compatible = "atmel,at91rm9200-wdt";
-				};
-			};
-
-			rtc: rtc@fffffe00 {
-				compatible = "atmel,at91rm9200-rtc";
-				reg = <0xfffffe00 0x40>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&slow_xtal>;
-				status = "disabled";
-			};
-
-			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xfffa0000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
-					      18 IRQ_TYPE_LEVEL_HIGH 0
-					      19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			tcb1: timer@fffa4000 {
-				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xfffa4000 0x100>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
-					      21 IRQ_TYPE_LEVEL_HIGH 0
-					      22 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&slow_xtal>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			i2c0: i2c@fffb8000 {
-				compatible = "atmel,at91rm9200-i2c";
-				reg = <0xfffb8000 0x4000>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_twi>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			mmc0: mmc@fffb4000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfffb4000 0x4000>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
-				clock-names = "mci_clk";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			ssc0: ssc@fffd0000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffd0000 0x4000>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			ssc1: ssc@fffd4000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffd4000 0x4000>;
-				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			ssc2: ssc@fffd8000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffd8000 0x4000>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			macb0: ethernet@fffbc000 {
-				compatible = "cdns,at91rm9200-emac", "cdns,emac";
-				reg = <0xfffbc000 0x4000>;
-				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
-				phy-mode = "rmii";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
-				clock-names = "ether_clk";
-				status = "disabled";
-			};
-
-			pinctrl@fffff400 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff400 0xfffff400 0x800>;
-
-				atmel,mux-mask = <
-					/*    A         B     */
-					 0xffffffff 0xffffffff  /* pioA */
-					 0xffffffff 0x083fffff  /* pioB */
-					 0xffff3fff 0x00000000  /* pioC */
-					 0x03ff87ff 0x0fffff80  /* pioD */
-					>;
-
-				/* shared pinctrl settings */
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				uart0 {
-					pinctrl_uart0: uart0-0 {
-						atmel,pins =
-							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_uart0_cts: uart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A */
-					};
-
-					pinctrl_uart0_rts: uart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1: uart1-0 {
-						atmel,pins =
-							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_uart1_rts: uart1_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB24 periph A */
-					};
-
-					pinctrl_uart1_cts: uart1_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
-					};
-
-					pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 {
-						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
-							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
-					};
-
-					pinctrl_uart1_dcd: uart1_dcd-0 {
-						atmel,pins =
-							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
-					};
-
-					pinctrl_uart1_ri: uart1_ri-0 {
-						atmel,pins =
-							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
-					};
-				};
-
-				uart2 {
-					pinctrl_uart2: uart2-0 {
-						atmel,pins =
-							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_uart2_rts: uart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
-					};
-
-					pinctrl_uart2_cts: uart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA31 periph B */
-					};
-				};
-
-				uart3 {
-					pinctrl_uart3: uart3-0 {
-						atmel,pins =
-							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE
-							 AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_uart3_rts: uart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
-					};
-
-					pinctrl_uart3_cts: uart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
-					};
-				};
-
-				nand {
-					pinctrl_nand: nand-0 {
-						atmel,pins =
-							<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PC2 gpio RDY pin pull_up */
-							 AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PB1 gpio CD pin pull_up */
-					};
-				};
-
-				macb {
-					pinctrl_macb_rmii: macb_rmii-0 {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA7 periph A */
-							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA8 periph A */
-							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
-							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
-							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
-							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
-							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
-							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA16 periph A */
-					};
-
-					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
-						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB12 periph B */
-							 AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB13 periph B */
-							 AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B */
-							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB15 periph B */
-							 AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB16 periph B */
-							 AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB17 periph B */
-							 AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB18 periph B */
-							 AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB19 periph B */
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_clk: mmc0_clk-0 {
-						atmel,pins =
-							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA27 periph A */
-					};
-
-					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
-							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA29 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB3 periph B with pullup */
-							 AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB4 periph B with pullup */
-							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PB5 periph B with pullup */
-					};
-
-					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA8 periph B with pullup */
-							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA9 periph B with pullup */
-					};
-
-					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA10 periph B with pullup */
-							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
-							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA12 periph B with pullup */
-					};
-				};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A */
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
-							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
-					};
-				};
-
-				ssc1 {
-					pinctrl_ssc1_tx: ssc1_tx-0 {
-						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
-							 AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
-					};
-
-					pinctrl_ssc1_rx: ssc1_rx-0 {
-						atmel,pins =
-							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
-							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
-					};
-				};
-
-				ssc2 {
-					pinctrl_ssc2_tx: ssc2_tx-0 {
-						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
-							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A */
-					};
-
-					pinctrl_ssc2_rx: ssc2_rx-0 {
-						atmel,pins =
-							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
-					};
-				};
-
-				twi {
-					pinctrl_twi: twi-0 {
-						atmel,pins =
-							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE	/* PA25 periph A with multi drive */
-							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 periph A with multi drive */
-					};
-
-					pinctrl_twi_gpio: twi_gpio-0 {
-						atmel,pins =
-							<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA25 GPIO with multi drive */
-							 AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 GPIO with multi drive */
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb1 {
-					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
-						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
-						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
-						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
-						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
-						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
-						atmel,pins = <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
-						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
-						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
-						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
-							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
-							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
-					};
-				};
-
-				pioA: gpio@fffff400 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
-				};
-
-				pioB: gpio@fffff600 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
-				};
-
-				pioC: gpio@fffff800 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
-				};
-
-				pioD: gpio@fffffa00 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffffa00 0x200>;
-					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
-				reg = <0xfffff200 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart0: serial@fffc0000 {
-				compatible = "atmel,at91rm9200-usart";
-				reg = <0xfffc0000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@fffc4000 {
-				compatible = "atmel,at91rm9200-usart";
-				reg = <0xfffc4000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@fffc8000 {
-				compatible = "atmel,at91rm9200-usart";
-				reg = <0xfffc8000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart3: serial@fffcc000 {
-				compatible = "atmel,at91rm9200-usart";
-				reg = <0xfffcc000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart3>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usb1: gadget@fffb0000 {
-				compatible = "atmel,at91rm9200-udc";
-				reg = <0xfffb0000 0x4000>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
-				clock-names = "pclk", "hclk";
-				status = "disabled";
-			};
-
-			spi0: spi@fffe0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffe0000 0x200>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-		};
-
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40000000 0x10000000>;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_nand>;
-			nand-ecc-mode = "soft";
-			gpios = <&pioC 2 GPIO_ACTIVE_HIGH
-				 0
-				 &pioB 1 GPIO_ACTIVE_HIGH
-				>;
-			status = "disabled";
-		};
-
-		usb0: ohci@300000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00300000 0x100000>;
-			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 4>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_twi_gpio>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
deleted file mode 100644
index c3d4177b98238..0000000000000
--- a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC
- *
- * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-#include "at91rm9200.dtsi"
-
-/ {
-	compatible = "atmel,at91rm9200-pqfp", "atmel,at91rm9200";
-};
-
-&pioD {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
deleted file mode 100644
index 4624a6f076f81..0000000000000
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
- *
- *  Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
- */
-/dts-v1/;
-#include "at91rm9200.dtsi"
-
-/ {
-	model = "Atmel AT91RM9200 evaluation kit";
-	compatible = "atmel,at91rm9200ek", "atmel,at91rm9200";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			usb1: gadget@fffb0000 {
-				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
-				atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			macb0: ethernet@fffbc000 {
-				phy-mode = "rmii";
-				status = "okay";
-
-				phy0: ethernet-phy {
-					interrupt-parent = <&pioC>;
-					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
-				};
-			};
-
-			usart1: serial@fffc4000 {
-				pinctrl-0 =
-						<&pinctrl_uart1
-						 &pinctrl_uart1_rts
-						 &pinctrl_uart1_cts
-						 &pinctrl_uart1_dtr_dsr
-						 &pinctrl_uart1_dcd
-						 &pinctrl_uart1_ri>;
-				status = "okay";
-			};
-
-			spi0: spi@fffe0000 {
-				status = "okay";
-				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
-				flash@0 {
-					compatible = "atmel,at45", "atmel,dataflash";
-					spi-max-frequency = <15000000>;
-					reg = <0>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			rtc: rtc@fffffe00 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@300000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-
-		flash@10000000 {
-			compatible = "cfi-flash";
-			reg = <0x10000000 0x800000>;
-			linux,mtd-name = "physmap-flash.0";
-			bank-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			barebox@0 {
-				label = "barebox";
-				reg = <0x00000 0x40000>;
-			};
-
-			bareboxenv@40000 {
-				label = "bareboxenv";
-				reg = <0x40000 0x10000>;
-			};
-
-			kernel@50000 {
-				label = "kernel";
-				reg = <0x50000 0x300000>;
-			};
-
-			root@350000  {
-				label = "root";
-				reg = <0x350000 0x4B0000>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		ds2 {
-			label = "green";
-			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "mmc0";
-		};
-
-		ds4 {
-			label = "yellow";
-			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		ds6 {
-			label = "red";
-			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
deleted file mode 100644
index 789fe356dbf60..0000000000000
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ /dev/null
@@ -1,796 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
- *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
- *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-#include <dt-bindings/mfd/at91-usart.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Atmel AT91SAM9260 family SoC";
-	compatible = "atmel,at91sam9260";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		serial5 = &uart0;
-		serial6 = &uart1;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-		i2c0 = &i2c0;
-		ssc0 = &ssc0;
-	};
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x04000000>;
-	};
-
-	clocks {
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		adc_op_clk: adc_op_clk{
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <5000000>;
-		};
-	};
-
-	sram0: sram@2ff000 {
-		compatible = "mmio-sram";
-		reg = <0x002ff000 0x2000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x002ff000 0x2000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <29 30 31>;
-			};
-
-			ramc0: ramc@ffffea00 {
-				compatible = "atmel,at91sam9260-sdramc";
-				reg = <0xffffea00 0x200>;
-			};
-
-			smc: smc@ffffec00 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffec00 0x200>;
-			};
-
-			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9260-matrix", "syscon";
-				reg = <0xffffee00 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9260-pmc", "syscon";
-				reg = <0xfffffc00 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				#clock-cells = <2>;
-				clocks = <&slow_xtal>, <&main_xtal>;
-				clock-names = "slow_xtal", "main_xtal";
-			};
-
-			reset-controller@fffffd00 {
-				compatible = "atmel,at91sam9260-rstc";
-				reg = <0xfffffd00 0x10>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
-			};
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9260-shdwc";
-				reg = <0xfffffd10 0x10>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			};
-
-			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xfffa0000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
-					      18 IRQ_TYPE_LEVEL_HIGH 0
-					      19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			tcb1: timer@fffdc000 {
-				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xfffdc000 0x100>;
-				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
-					      27 IRQ_TYPE_LEVEL_HIGH 0
-					      28 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 28>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			pinctrl: pinctrl@fffff400 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff400 0xfffff400 0x600>;
-
-				atmel,mux-mask = <
-				      /*    A         B     */
-				       0xffffffff 0xffc00c3b  /* pioA */
-				       0xffffffff 0x7fff3ccf  /* pioB */
-				       0xffffffff 0x007fffff  /* pioC */
-				      >;
-
-				/* shared pinctrl settings */
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart0 {
-					pinctrl_usart0: usart0-0 {
-						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart0_rts: usart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
-					};
-
-					pinctrl_usart0_cts: usart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A */
-					};
-
-					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
-						atmel,pins =
-							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A */
-							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB22 periph A */
-					};
-
-					pinctrl_usart0_dcd: usart0_dcd-0 {
-						atmel,pins =
-							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
-					};
-
-					pinctrl_usart0_ri: usart0_ri-0 {
-						atmel,pins =
-							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
-					};
-				};
-
-				usart1 {
-					pinctrl_usart1: usart1-0 {
-						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart1_rts: usart1_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB28 periph A */
-					};
-
-					pinctrl_usart1_cts: usart1_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB29 periph A */
-					};
-				};
-
-				usart2 {
-					pinctrl_usart2: usart2-0 {
-						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart2_rts: usart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
-					};
-
-					pinctrl_usart2_cts: usart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
-					};
-				};
-
-				usart3 {
-					pinctrl_usart3: usart3-0 {
-						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart3_rts: usart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart3_cts: usart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				uart0 {
-					pinctrl_uart0: uart0-0 {
-						atmel,pins =
-							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
-							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1: uart1-0 {
-						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				nand {
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_cs: nand-cs-0 {
-						atmel,pins =
-							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				macb {
-					pinctrl_macb_rmii: macb_rmii-0 {
-						atmel,pins =
-							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
-							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
-							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
-							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
-							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
-							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
-							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA19 periph A */
-							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA20 periph A */
-							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
-					};
-
-					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
-						atmel,pins =
-							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
-							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA23 periph B */
-							 AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
-							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
-							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
-							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
-							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
-							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
-					};
-
-					pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
-						atmel,pins =
-							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA10 periph B */
-							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA11 periph B */
-							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
-							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
-							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
-							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
-							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
-							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_clk: mmc0_clk-0 {
-						atmel,pins =
-							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
-					};
-
-					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
-							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA6 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA9 periph A with pullup */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA10 periph A with pullup */
-							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA11 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA1 periph B with pullup */
-							 AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA0 periph B with pullup */
-					};
-
-					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA5 periph B with pullup */
-							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA4 periph B with pullup */
-							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA3 periph B with pullup */
-					};
-				};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A */
-							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
-							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB20 periph A */
-							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB21 periph A */
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
-							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
-							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
-					};
-				};
-
-				spi1 {
-					pinctrl_spi1: spi1-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI1_MISO pin */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI1_MOSI pin */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI1_SPCK pin */
-					};
-				};
-
-				i2c_gpio0 {
-					pinctrl_i2c_gpio0: i2c_gpio0-0 {
-						atmel,pins =
-							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
-							 AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb1 {
-					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
-						atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
-						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
-						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
-						atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
-						atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
-						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
-						atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
-						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
-						atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				pioA: gpio@fffff400 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
-				};
-
-				pioB: gpio@fffff600 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
-				};
-
-				pioC: gpio@fffff800 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart0: serial@fffb0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb0000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@fffb4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb4000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@fffb8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb8000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart3: serial@fffd0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd0000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			uart0: serial@fffd4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd4000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			uart1: serial@fffd8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd8000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			macb0: ethernet@fffc4000 {
-				compatible = "cdns,at91sam9260-macb", "cdns,macb";
-				reg = <0xfffc4000 0x100>;
-				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
-				clock-names = "hclk", "pclk";
-				status = "disabled";
-			};
-
-			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91sam9260-udc";
-				reg = <0xfffa4000 0x4000>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
-				clock-names = "pclk", "hclk";
-				status = "disabled";
-			};
-
-			i2c0: i2c@fffac000 {
-				compatible = "atmel,at91sam9260-i2c";
-				reg = <0xfffac000 0x100>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
-				status = "disabled";
-			};
-
-			mmc0: mmc@fffa8000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfffa8000 0x600>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
-				clock-names = "mci_clk";
-				status = "disabled";
-			};
-
-			ssc0: ssc@fffbc000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffbc000 0x4000>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			spi0: spi@fffc8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffc8000 0x200>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			spi1: spi@fffcc000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffcc000 0x200>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			adc0: adc@fffe0000 {
-				compatible = "atmel,at91sam9260-adc";
-				reg = <0xfffe0000 0x100>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&adc_op_clk>;
-				clock-names = "adc_clk", "adc_op_clk";
-				atmel,adc-use-external-triggers;
-				atmel,adc-channels-used = <0xf>;
-				atmel,adc-vref = <3300>;
-				atmel,adc-startup-time = <15>;
-			};
-
-			rtc@fffffd20 {
-				compatible = "atmel,at91sam9260-rtt";
-				reg = <0xfffffd20 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
-				status = "disabled";
-			};
-
-			watchdog: watchdog@fffffd40 {
-				compatible = "atmel,at91sam9260-wdt";
-				reg = <0xfffffd40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
-				atmel,watchdog-type = "hardware";
-				atmel,reset-type = "all";
-				atmel,dbg-halt;
-				status = "disabled";
-			};
-
-			gpbr: syscon@fffffd50 {
-				compatible = "atmel,at91sam9260-gpbr", "syscon";
-				reg = <0xfffffd50 0x10>;
-				status = "disabled";
-			};
-		};
-
-		usb0: ohci@500000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00500000 0x100000>;
-			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 6>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-
-		ebi: ebi@10000000 {
-			compatible = "atmel,at91sam9260-ebi";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc>;
-			atmel,matrix = <&matrix>;
-			reg = <0x10000000 0x80000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000
-				  0x6 0x0 0x70000000 0x10000000
-				  0x7 0x0 0x80000000 0x10000000>;
-			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			status = "disabled";
-
-			nand_controller: nand-controller {
-				compatible = "atmel,at91sam9260-nand-controller";
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-	};
-
-	i2c_gpio0: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
deleted file mode 100644
index bb72f050a4fef..0000000000000
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ /dev/null
@@ -1,188 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Atmel at91sam9260 Evaluation Kit
- *
- *  Copyright (C) 2016 Atmel,
- *		  2016 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-/dts-v1/;
-#include "at91sam9260.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Atmel at91sam9260ek";
-	compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
-
-	chosen {
-		stdout-path = &dbgu;
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			mmc0: mmc@fffa8000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0_slot1
-					&pinctrl_mmc0_clk
-					&pinctrl_mmc0_slot1_cmd_dat0
-					&pinctrl_mmc0_slot1_dat1_3>;
-				pinctrl-names = "default";
-				status = "okay";
-				slot@1 {
-					reg = <1>;
-					bus-width = <4>;
-					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 =
-					<&pinctrl_usart0
-					 &pinctrl_usart0_rts
-					 &pinctrl_usart0_cts
-					 &pinctrl_usart0_dtr_dsr
-					 &pinctrl_usart0_dcd
-					 &pinctrl_usart0_ri>;
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			ssc0: ssc@fffbc000 {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_ssc0_tx>;
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			spi0: spi@fffc8000 {
-				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				flash@1 {
-					compatible = "atmel,at45", "atmel,dataflash";
-					spi-max-frequency = <50000000>;
-					reg = <1>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				board {
-					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
-						atmel,pins =
-							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-				};
-			};
-
-			shdwc@fffffd10 {
-				atmel,wakeup-counter = <10>;
-				atmel,wakeup-rtt-timer;
-			};
-
-			rtc@fffffd20 {
-				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-
-			gpbr: syscon@fffffd50 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-3 {
-			label = "Button 3";
-			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
-			linux,code = <0x103>;
-			wakeup-source;
-		};
-
-		button-4 {
-			label = "Button 4";
-			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-
-		24c512@50 {
-			compatible = "atmel,24c512";
-			reg = <0x50>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		ds1 {
-			label = "ds1";
-			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		ds5 {
-			label = "ds5";
-			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
deleted file mode 100644
index ee0bd1aceb3f0..0000000000000
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ /dev/null
@@ -1,667 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
- *
- *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
- */
-
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-#include <dt-bindings/mfd/at91-usart.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Atmel AT91SAM9261 family SoC";
-	compatible = "atmel,at91sam9261";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		tcb0 = &tcb0;
-		i2c0 = &i2c0;
-		ssc0 = &ssc0;
-		ssc1 = &ssc1;
-		ssc2 = &ssc2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x08000000>;
-	};
-
-	clocks {
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	sram: sram@300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x28000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x00300000 0x28000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usb0: ohci@500000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00500000 0x100000>;
-			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 16>, <&pmc PMC_TYPE_SYSTEM 6>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-
-		fb0: fb@600000 {
-			compatible = "atmel,at91sam9261-lcdc";
-			reg = <0x00600000 0x1000>;
-			interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_fb>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_SYSTEM 17>;
-			clock-names = "lcdc_clk", "hclk";
-			status = "disabled";
-		};
-
-		ebi: ebi@10000000 {
-			compatible = "atmel,at91sam9261-ebi";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc>;
-			atmel,matrix = <&matrix>;
-			reg = <0x10000000 0x80000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000
-				  0x6 0x0 0x70000000 0x10000000
-				  0x7 0x0 0x80000000 0x10000000>;
-			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			status = "disabled";
-
-			nand_controller: nand-controller {
-				compatible = "atmel,at91sam9261-nand-controller";
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xfffa0000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91sam9261-udc";
-				reg = <0xfffa4000 0x4000>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
-				clock-names = "pclk", "hclk";
-				atmel,matrix = <&matrix>;
-				status = "disabled";
-			};
-
-			mmc0: mmc@fffa8000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfffa8000 0x600>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
-				clock-names = "mci_clk";
-				status = "disabled";
-			};
-
-			i2c0: i2c@fffac000 {
-				compatible = "atmel,at91sam9261-i2c";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c_twi>;
-				reg = <0xfffac000 0x100>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
-				status = "disabled";
-			};
-
-			usart0: serial@fffb0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb0000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@fffb4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb4000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@fffb8000{
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb8000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			ssc0: ssc@fffbc000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffbc000 0x4000>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			ssc1: ssc@fffc0000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffc0000 0x4000>;
-				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			ssc2: ssc@fffc4000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffc4000 0x4000>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			spi0: spi@fffc8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffc8000 0x200>;
-				cs-gpios = <0>, <0>, <0>, <0>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			spi1: spi@fffcc000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffcc000 0x200>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			ramc: ramc@ffffea00 {
-				compatible = "atmel,at91sam9260-sdramc";
-				reg = <0xffffea00 0x200>;
-			};
-
-			smc: smc@ffffec00 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffec00 0x200>;
-			};
-
-			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9261-matrix", "syscon";
-				reg = <0xffffee00 0x200>;
-			};
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <29 30 31>;
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			pinctrl@fffff400 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff400 0xfffff400 0x600>;
-
-				atmel,mux-mask =
-				      /*    A         B     */
-				      <0xffffffff 0xfffffff7>,  /* pioA */
-				      <0xffffffff 0xfffffff4>,  /* pioB */
-				      <0xffffffff 0xffffff07>;  /* pioC */
-
-				/* shared pinctrl settings */
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart0 {
-					pinctrl_usart0: usart0-0 {
-						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart0_rts: usart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart0_cts: usart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart1 {
-					pinctrl_usart1: usart1-0 {
-						atmel,pins =
-							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart1_rts: usart1_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart1_cts: usart1_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart2 {
-					pinctrl_usart2: usart2-0 {
-						atmel,pins =
-							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart2_rts: usart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart2_cts: usart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				nand {
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_cs: nand-cs-0 {
-						atmel,pins =
-							<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_clk: mmc0_clk-0 {
-						atmel,pins =
-							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
-					};
-					};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				ssc1 {
-					pinctrl_ssc1_tx: ssc1_tx-0 {
-						atmel,pins =
-							<AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ssc1_rx: ssc1_rx-0 {
-						atmel,pins =
-							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				ssc2 {
-					pinctrl_ssc2_tx: ssc2_tx-0 {
-						atmel,pins =
-							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ssc2_rx: ssc2_rx-0 {
-						atmel,pins =
-							<AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-					};
-
-				spi1 {
-					pinctrl_spi1: spi1-0 {
-						atmel,pins =
-							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				i2c0 {
-					pinctrl_i2c_bitbang: i2c-0-bitbang {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
-							<AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_i2c_twi: i2c-0-twi {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				fb {
-					pinctrl_fb: fb-0 {
-						atmel,pins =
-							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				pioA: gpio@fffff400 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
-				};
-
-				pioB: gpio@fffff600 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
-				};
-
-				pioC: gpio@fffff800 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
-				};
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9261-pmc", "syscon";
-				reg = <0xfffffc00 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				#clock-cells = <2>;
-				clocks = <&slow_xtal>, <&main_xtal>;
-				clock-names = "slow_xtal", "main_xtal";
-			};
-
-			reset-controller@fffffd00 {
-				compatible = "atmel,at91sam9260-rstc";
-				reg = <0xfffffd00 0x10>;
-				clocks = <&slow_xtal>;
-			};
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9260-shdwc";
-				reg = <0xfffffd10 0x10>;
-				clocks = <&slow_xtal>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			};
-
-			rtc@fffffd20 {
-				compatible = "atmel,at91sam9260-rtt";
-				reg = <0xfffffd20 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&slow_xtal>;
-				status = "disabled";
-			};
-
-			watchdog@fffffd40 {
-				compatible = "atmel,at91sam9260-wdt";
-				reg = <0xfffffd40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&slow_xtal>;
-				status = "disabled";
-			};
-
-			gpbr: syscon@fffffd50 {
-				compatible = "atmel,at91sam9260-gpbr", "syscon";
-				reg = <0xfffffd50 0x10>;
-				status = "disabled";
-			};
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_bitbang>;
-		gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
deleted file mode 100644
index 045cb253f23a6..0000000000000
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ /dev/null
@@ -1,245 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
- *
- *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
- */
-/dts-v1/;
-#include "at91sam9261.dtsi"
-
-/ {
-	model = "Atmel at91sam9261ek";
-	compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		usb0: ohci@500000 {
-			status = "okay";
-		};
-
-		fb0: fb@600000 {
-			display = <&display0>;
-			atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
-			status = "okay";
-
-			display0: panel {
-				bits-per-pixel = <16>;
-				atmel,lcdcon-backlight;
-				atmel,dmacon = <0x1>;
-				atmel,lcdcon2 = <0x80008002>;
-				atmel,guard-time = <1>;
-				atmel,lcd-wiring-mode = "BRG";
-
-				display-timings {
-					native-mode = <&timing0>;
-					timing0: timing0 {
-						clock-frequency = <4965000>;
-						hactive = <240>;
-						vactive = <320>;
-						hback-porch = <1>;
-						hfront-porch = <33>;
-						vback-porch = <1>;
-						vfront-porch = <0>;
-						hsync-len = <5>;
-						vsync-len = <1>;
-						hsync-active = <1>;
-						vsync-active = <1>;
-					};
-				};
-			};
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						bootloader@40000 {
-							label = "bootloader";
-							reg = <0x40000 0x80000>;
-						};
-
-						bootloaderenv@c0000 {
-							label = "bootloader env";
-							reg = <0xc0000 0xc0000>;
-						};
-
-						dtb@180000 {
-							label = "device tree";
-							reg = <0x180000 0x80000>;
-						};
-
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
-						};
-
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
-						};
-					};
-				};
-			};
-		};
-
-		apb {
-			tcb0: timer@fffa0000 {
-				timer0: timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer1: timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			spi0: spi@fffc8000 {
-				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
-				status = "okay";
-
-				flash@0 {
-					compatible = "atmel,at45", "atmel,dataflash";
-					reg = <0>;
-					spi-max-frequency = <15000000>;
-				};
-
-				tsc2046@2 {
-					reg = <2>;
-					compatible = "ti,ads7843";
-					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
-					spi-max-frequency = <3000000>;
-					pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
-
-					ti,x-min = /bits/ 16 <150>;
-					ti,x-max = /bits/ 16 <3830>;
-					ti,y-min = /bits/ 16 <190>;
-					ti,y-max = /bits/ 16 <3830>;
-					ti,vref-delay-usecs = /bits/ 16 <450>;
-					ti,x-plate-ohms = /bits/ 16 <450>;
-					ti,y-plate-ohms = /bits/ 16 <250>;
-					ti,pressure-max = /bits/ 16 <15000>;
-					ti,debounce-rep = /bits/ 16 <0>;
-					ti,debounce-tol = /bits/ 16 <65535>;
-					ti,debounce-max = /bits/ 16 <1>;
-
-					wakeup-source;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			rtc@fffffd20 {
-				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		ds8 {
-			label = "ds8";
-			gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		ds7 {
-			label = "ds7";
-			gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "nand-disk";
-		};
-
-		ds1 {
-			label = "ds1";
-			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-0 {
-			label = "button_0";
-			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
-			linux,code = <256>;
-			wakeup-source;
-		};
-
-		button-1 {
-			label = "button_1";
-			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
-			linux,code = <257>;
-			wakeup-source;
-		};
-
-		button-2 {
-			label = "button_2";
-			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
-			linux,code = <258>;
-			wakeup-source;
-		};
-
-		button-3 {
-			label = "button_3";
-			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
-			linux,code = <259>;
-			wakeup-source;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
deleted file mode 100644
index 3ce9ea9873129..0000000000000
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ /dev/null
@@ -1,839 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
- *
- *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-#include <dt-bindings/mfd/at91-usart.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Atmel AT91SAM9263 family SoC";
-	compatible = "atmel,at91sam9263";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		gpio4 = &pioE;
-		tcb0 = &tcb0;
-		i2c0 = &i2c0;
-		ssc0 = &ssc0;
-		ssc1 = &ssc1;
-		pwm0 = &pwm0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x08000000>;
-	};
-
-	clocks {
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	sram0: sram@300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x14000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x00300000 0x14000>;
-	};
-
-	sram1: sram@500000 {
-		compatible = "mmio-sram";
-		reg = <0x00500000 0x4000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x00500000 0x4000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <30 31>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9263-pmc", "syscon";
-				reg = <0xfffffc00 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				#clock-cells = <2>;
-				clocks = <&slow_xtal>, <&main_xtal>;
-				clock-names = "slow_xtal", "main_xtal";
-			};
-
-			ramc0: ramc@ffffe200 {
-				compatible = "atmel,at91sam9260-sdramc";
-				reg = <0xffffe200 0x200>;
-			};
-
-			smc0: smc@ffffe400 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffe400 0x200>;
-			};
-
-			ramc1: ramc@ffffe800 {
-				compatible = "atmel,at91sam9260-sdramc";
-				reg = <0xffffe800 0x200>;
-			};
-
-			smc1: smc@ffffea00 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffea00 0x200>;
-			};
-
-			matrix: matrix@ffffec00 {
-				compatible = "atmel,at91sam9263-matrix", "syscon";
-				reg = <0xffffec00 0x200>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			};
-
-			tcb0: timer@fff7c000 {
-				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xfff7c000 0x100>;
-				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
-				clock-names = "t0_clk", "slow_clk";
-			};
-
-			reset-controller@fffffd00 {
-				compatible = "atmel,at91sam9260-rstc";
-				reg = <0xfffffd00 0x10>;
-				clocks = <&slow_xtal>;
-			};
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9260-shdwc";
-				reg = <0xfffffd10 0x10>;
-				clocks = <&slow_xtal>;
-			};
-
-			pinctrl@fffff200 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff200 0xfffff200 0xa00>;
-
-				atmel,mux-mask = <
-				      /*    A         B     */
-				       0xfffffffb 0xffffe07f  /* pioA */
-				       0x0007ffff 0x39072fff  /* pioB */
-				       0xffffffff 0x3ffffff8  /* pioC */
-				       0xfffffbff 0xffffffff  /* pioD */
-				       0xffe00fff 0xfbfcff00  /* pioE */
-				      >;
-
-				/* shared pinctrl settings */
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart0 {
-					pinctrl_usart0: usart0-0 {
-						atmel,pins =
-							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart0_rts: usart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA28 periph A */
-					};
-
-					pinctrl_usart0_cts: usart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA29 periph A */
-					};
-				};
-
-				usart1 {
-					pinctrl_usart1: usart1-0 {
-						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart1_rts: usart1_rts-0 {
-						atmel,pins =
-							<AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD7 periph B */
-					};
-
-					pinctrl_usart1_cts: usart1_cts-0 {
-						atmel,pins =
-							<AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD8 periph B */
-					};
-				};
-
-				usart2 {
-					pinctrl_usart2: usart2-0 {
-						atmel,pins =
-							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart2_rts: usart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD5 periph B */
-					};
-
-					pinctrl_usart2_cts: usart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD6 periph B */
-					};
-				};
-
-				nand {
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_cs: nand-cs-0 {
-						atmel,pins =
-							 <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				macb {
-					pinctrl_macb_rmii: macb_rmii-0 {
-						atmel,pins =
-							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC25 periph B */
-							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
-							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
-							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
-							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
-							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
-							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
-							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
-							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
-							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
-					};
-
-					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
-						atmel,pins =
-							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
-							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
-							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC22 periph B */
-							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC23 periph B */
-							 AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC24 periph B */
-							 AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC25 periph B */
-							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
-							 AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE22 periph B */
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_clk: mmc0_clk-0 {
-						atmel,pins =
-							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA12 periph A */
-					};
-
-					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
-							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA0 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA3 periph A with pullup */
-							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA4 periph A with pullup */
-							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA5 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
-							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA17 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
-							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
-							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
-					};
-				};
-
-				mmc1 {
-					pinctrl_mmc1_clk: mmc1_clk-0 {
-						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA6 periph A */
-					};
-
-					pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
-							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA8 periph A with pullup */
-					};
-
-					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA9 periph A with pullup */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA10 periph A with pullup */
-							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA11 periph A with pullup */
-					};
-
-					pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA21 periph A with pullup */
-							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA22 periph A with pullup */
-					};
-
-					pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA23 periph A with pullup */
-							 AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA24 periph A with pullup */
-							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA25 periph A with pullup */
-					};
-				};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB0 periph B */
-							 AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB1 periph B */
-							 AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB3 periph B */
-							 AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B */
-							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B */
-					};
-				};
-
-				ssc1 {
-					pinctrl_ssc1_tx: ssc1_tx-0 {
-						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
-							 AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
-					};
-
-					pinctrl_ssc1_rx: ssc1_rx-0 {
-						atmel,pins =
-							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
-							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA0 periph B SPI0_MISO pin */
-							 AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA1 periph B SPI0_MOSI pin */
-							 AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA2 periph B SPI0_SPCK pin */
-					};
-				};
-
-				spi1 {
-					pinctrl_spi1: spi1-0 {
-						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A SPI1_MISO pin */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A SPI1_MOSI pin */
-							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A SPI1_SPCK pin */
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				fb {
-					pinctrl_fb: fb-0 {
-						atmel,pins =
-							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A */
-							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A */
-							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A */
-							 AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB9 periph B */
-							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A */
-							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A */
-							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A */
-							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 periph A */
-							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 periph A */
-							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A */
-							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A */
-							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A */
-							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A */
-							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC12 periph B */
-							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC18 periph A */
-							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A */
-							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A */
-							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A */
-							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC24 periph A */
-							 AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC17 periph B */
-							 AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC26 periph A */
-							 AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC27 periph A */
-					};
-				};
-
-				can {
-					pinctrl_can_rx_tx: can_rx_tx {
-						atmel,pins =
-							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* CANRX, conflicts with IRQ0 */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* CANTX, conflicts with PCK0 */
-					};
-				};
-
-				ac97 {
-					pinctrl_ac97: ac97-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A AC97FS pin */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A AC97CK pin */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A AC97TX pin */
-							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A AC97RX pin */
-					};
-				};
-
-				pioA: gpio@fffff200 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff200 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
-				};
-
-				pioB: gpio@fffff400 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
-				};
-
-				pioC: gpio@fffff600 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
-				};
-
-				pioD: gpio@fffff800 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
-				};
-
-				pioE: gpio@fffffa00 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffffa00 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
-				};
-			};
-
-			dbgu: serial@ffffee00 {
-				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				reg = <0xffffee00 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart0: serial@fff8c000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff8c000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@fff90000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff90000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@fff94000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff94000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			ssc0: ssc@fff98000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfff98000 0x4000>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			ssc1: ssc@fff9c000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfff9c000 0x4000>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			ac97: sound@fffa0000 {
-				compatible = "atmel,at91sam9263-ac97c";
-				reg = <0xfffa0000 0x4000>;
-				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ac97>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
-				clock-names = "ac97_clk";
-				status = "disabled";
-			};
-
-			macb0: ethernet@fffbc000 {
-				compatible = "cdns,at91sam9260-macb", "cdns,macb";
-				reg = <0xfffbc000 0x100>;
-				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
-				clock-names = "hclk", "pclk";
-				status = "disabled";
-			};
-
-			usb1: gadget@fff78000 {
-				compatible = "atmel,at91sam9263-udc";
-				reg = <0xfff78000 0x4000>;
-				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_SYSTEM 7>;
-				clock-names = "pclk", "hclk";
-				status = "disabled";
-			};
-
-			i2c0: i2c@fff88000 {
-				compatible = "atmel,at91sam9260-i2c";
-				reg = <0xfff88000 0x100>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
-				status = "disabled";
-			};
-
-			mmc0: mmc@fff80000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfff80000 0x600>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
-				clock-names = "mci_clk";
-				status = "disabled";
-			};
-
-			mmc1: mmc@fff84000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfff84000 0x600>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
-				clock-names = "mci_clk";
-				status = "disabled";
-			};
-
-			watchdog@fffffd40 {
-				compatible = "atmel,at91sam9260-wdt";
-				reg = <0xfffffd40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&slow_xtal>;
-				atmel,watchdog-type = "hardware";
-				atmel,reset-type = "all";
-				atmel,dbg-halt;
-				status = "disabled";
-			};
-
-			spi0: spi@fffa4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffa4000 0x200>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			spi1: spi@fffa8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffa8000 0x200>;
-				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			pwm0: pwm@fffb8000 {
-				compatible = "atmel,at91sam9rl-pwm";
-				reg = <0xfffb8000 0x300>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
-				#pwm-cells = <3>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
-				clock-names = "pwm_clk";
-				status = "disabled";
-			};
-
-			can: can@fffac000 {
-				compatible = "atmel,at91sam9263-can";
-				reg = <0xfffac000 0x300>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can_rx_tx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
-				clock-names = "can_clk";
-			};
-
-			rtc@fffffd20 {
-				compatible = "atmel,at91sam9260-rtt";
-				reg = <0xfffffd20 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&slow_xtal>;
-				status = "disabled";
-			};
-
-			rtc@fffffd50 {
-				compatible = "atmel,at91sam9260-rtt";
-				reg = <0xfffffd50 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&slow_xtal>;
-				status = "disabled";
-			};
-
-			gpbr: syscon@fffffd60 {
-				compatible = "atmel,at91sam9260-gpbr", "syscon";
-				reg = <0xfffffd60 0x50>;
-				status = "disabled";
-			};
-		};
-
-		fb0: fb@700000 {
-			compatible = "atmel,at91sam9263-lcdc";
-			reg = <0x00700000 0x1000>;
-			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_fb>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 26>;
-			clock-names = "lcdc_clk", "hclk";
-			status = "disabled";
-		};
-
-		usb0: ohci@a00000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00a00000 0x100000>;
-			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_SYSTEM 6>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-
-		ebi0: ebi@10000000 {
-			compatible = "atmel,at91sam9263-ebi0";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc0>;
-			atmel,matrix = <&matrix>;
-			reg = <0x10000000 0x80000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000>;
-			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			status = "disabled";
-
-			nand_controller0: nand-controller {
-				compatible = "atmel,at91sam9260-nand-controller";
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-
-		ebi1: ebi@70000000 {
-			compatible = "atmel,at91sam9263-ebi1";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc1>;
-			atmel,matrix = <&matrix>;
-			reg = <0x80000000 0x20000000>;
-			ranges = <0x0 0x0 0x80000000 0x10000000
-				  0x1 0x0 0x90000000 0x10000000>;
-			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			status = "disabled";
-
-			nand_controller1: nand-controller {
-				compatible = "atmel,at91sam9260-nand-controller";
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
-			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
deleted file mode 100644
index ce8baff6a9f4e..0000000000000
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ /dev/null
@@ -1,262 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
- *
- *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-/dts-v1/;
-#include "at91sam9263.dtsi"
-
-/ {
-	model = "Atmel at91sam9263ek";
-	compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <16367660>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@ffffee00 {
-				status = "okay";
-			};
-
-			tcb0: timer@fff7c000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			usart0: serial@fff8c000 {
-				pinctrl-0 = <
-					&pinctrl_usart0
-					&pinctrl_usart0_rts
-					&pinctrl_usart0_cts>;
-				status = "okay";
-			};
-
-			macb0: ethernet@fffbc000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fff78000 {
-				atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			mmc0: mmc@fff80000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0
-					&pinctrl_mmc0_clk
-					&pinctrl_mmc0_slot0_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				pinctrl-names = "default";
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
-					wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			pinctrl@fffff200 {
-				mmc0 {
-					pinctrl_board_mmc0: mmc0-board {
-						atmel,pins =
-							<AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH 	/* PE18 gpio CD pin pull up and deglitch */
-							 AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PE19 gpio WP pin pull up */
-					};
-				};
-			};
-
-			spi0: spi@fffa4000 {
-				status = "okay";
-				cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
-				flash@0 {
-					compatible = "atmel,at45", "atmel,dataflash";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			rtc@fffffd20 {
-				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-		};
-
-		fb0: fb@700000 {
-			display = <&display0>;
-			status = "okay";
-
-			display0: panel {
-				bits-per-pixel = <16>;
-				atmel,lcdcon-backlight;
-				atmel,dmacon = <0x1>;
-				atmel,lcdcon2 = <0x80008002>;
-				atmel,guard-time = <1>;
-
-				display-timings {
-					native-mode = <&timing0>;
-					timing0: timing0 {
-						clock-frequency = <4965000>;
-						hactive = <240>;
-						vactive = <320>;
-						hback-porch = <1>;
-						hfront-porch = <33>;
-						vback-porch = <1>;
-						vfront-porch = <0>;
-						hsync-len = <5>;
-						vsync-len = <1>;
-						hsync-active = <1>;
-						vsync-active = <1>;
-					};
-				};
-			};
-		};
-
-		ebi0: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						barebox@20000 {
-							label = "barebox";
-							reg = <0x20000 0x40000>;
-						};
-
-						bareboxenv@60000 {
-							label = "bareboxenv";
-							reg = <0x60000 0x20000>;
-						};
-
-						bareboxenv2@80000 {
-							label = "bareboxenv2";
-							reg = <0x80000 0x20000>;
-						};
-
-						oftree@80000 {
-							label = "oftree";
-							reg = <0xa0000 0x20000>;
-						};
-
-						kernel@a0000 {
-							label = "kernel";
-							reg = <0xc0000 0x400000>;
-						};
-
-						rootfs@4a0000 {
-							label = "rootfs";
-							reg = <0x4c0000 0x7800000>;
-						};
-
-						data@7ca0000 {
-							label = "data";
-							reg = <0x7cc0000 0x8340000>;
-						};
-					};
-				};
-			};
-		};
-
-		usb0: ohci@a00000 {
-			num-ports = <2>;
-			status = "okay";
-			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
-					   &pioA 21 GPIO_ACTIVE_HIGH
-					  >;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		d3 {
-			label = "d3";
-			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		d2 {
-			label = "d2";
-			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "nand-disk";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-left-click {
-			label = "left_click";
-			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
-			linux,code = <272>;
-			wakeup-source;
-		};
-
-		button-right-click {
-			label = "right_click";
-			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
-			linux,code = <273>;
-			wakeup-source;
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-
-		24c512@50 {
-			compatible = "atmel,24c512";
-			reg = <0x50>;
-			pagesize = <128>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
deleted file mode 100644
index dde88276fe523..0000000000000
--- a/arch/arm/boot/dts/at91sam9g15.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
- *
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-#include "at91sam9x5.dtsi"
-#include "at91sam9x5_lcd.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G15 SoC";
-	compatible = "atmel,at91sam9g15", "atmel,at91sam9x5";
-};
-
-&pinctrl {
-	atmel,mux-mask = <
-	      /*    A         B          C     */
-	       0xffffffff 0xffe0399f 0x00000000  /* pioA */
-	       0x00040000 0x00047e3f 0x00000000  /* pioB */
-	       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
-	       0x003fffff 0x003f8000 0x00000000  /* pioD */
-	      >;
-};
-
-&pmc {
-	compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon";
-};
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts
deleted file mode 100644
index 889a5097eb2d4..0000000000000
--- a/arch/arm/boot/dts/at91sam9g15ek.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-/dts-v1/;
-#include "at91sam9g15.dtsi"
-#include "at91sam9x5dm.dtsi"
-#include "at91sam9x5ek.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G15-EK";
-	compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	backlight: backlight {
-		status = "okay";
-	};
-
-	bl_reg: backlight_regulator {
-		status = "okay";
-	};
-
-	panel: panel {
-		status = "okay";
-	};
-
-	panel_reg: panel_regulator {
-		status = "okay";
-	};
-};
-
-&hlcdc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
deleted file mode 100644
index 708e1646b7f46..0000000000000
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
- *
- *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-#include "at91sam9260.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G20 family SoC";
-	compatible = "atmel,at91sam9g20";
-
-	memory@20000000 {
-		reg = <0x20000000 0x08000000>;
-	};
-
-	sram0: sram@2ff000 {
-		status = "disabled";
-	};
-
-	sram1: sram@2fc000 {
-		compatible = "mmio-sram";
-		reg = <0x002fc000 0x8000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x002fc000 0x8000>;
-	};
-
-	ahb {
-		apb {
-			i2c0: i2c@fffac000 {
-				compatible = "atmel,at91sam9g20-i2c";
-			};
-
-			ssc0: ssc@fffbc000 {
-				compatible = "atmel,at91sam9rl-ssc";
-			};
-
-			adc0: adc@fffe0000 {
-				atmel,adc-startup-time = <40>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9g20-pmc", "atmel,at91sam9260-pmc", "syscon";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts
deleted file mode 100644
index 6de7a7cd3c078..0000000000000
--- a/arch/arm/boot/dts/at91sam9g20ek.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
- *
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-/dts-v1/;
-#include "at91sam9g20ek_common.dtsi"
-
-/ {
-	model = "Atmel at91sam9g20ek";
-	compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	leds {
-		compatible = "gpio-leds";
-
-		ds1 {
-			label = "ds1";
-			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		ds5 {
-			label = "ds5";
-			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
deleted file mode 100644
index 2db95e8ffc643..0000000000000
--- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
- *
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-/dts-v1/;
-#include "at91sam9g20ek_common.dtsi"
-
-/ {
-	model = "Atmel at91sam9g20ek 2 mmc";
-	compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	ahb {
-		apb{
-			mmc0: mmc@fffa8000 {
-				/* clk already mux wuth slot0 */
-				pinctrl-0 = <
-					&pinctrl_board_mmc0_slot0
-					&pinctrl_mmc0_slot0_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			pinctrl@fffff400 {
-				mmc0_slot0 {
-					pinctrl_board_mmc0_slot0: mmc0_slot0-board {
-						atmel,pins =
-							<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC2 gpio CD pin pull up and deglitch */
-					};
-				};
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		ds1 {
-			label = "ds1";
-			gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		ds5 {
-			label = "ds5";
-			gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
deleted file mode 100644
index 024af2db638eb..0000000000000
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ /dev/null
@@ -1,309 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
- *
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-#include "at91sam9g20.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-
-	chosen {
-		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				board {
-					pinctrl_pck0_as_mck: pck0_as_mck {
-						atmel,pins =
-							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC1 periph B */
-					};
-
-				};
-
-				usb1 {
-					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
-						atmel,pins =
-							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
-					};
-				};
-
-				mmc0_slot1 {
-					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
-						atmel,pins =
-							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC9 gpio CD pin pull up and deglitch */
-					};
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 =
-					<&pinctrl_usart0
-					 &pinctrl_usart0_rts
-					 &pinctrl_usart0_cts
-					 &pinctrl_usart0_dtr_dsr
-					 &pinctrl_usart0_dcd
-					 &pinctrl_usart0_ri>;
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
-				pinctrl-names = "default";
-				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			mmc0: mmc@fffa8000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0_slot1
-					&pinctrl_mmc0_clk
-					&pinctrl_mmc0_slot1_cmd_dat0
-					&pinctrl_mmc0_slot1_dat1_3>;
-				pinctrl-names = "default";
-				status = "okay";
-				slot@1 {
-					reg = <1>;
-					bus-width = <4>;
-					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			ssc0: ssc@fffbc000 {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_ssc0_tx>;
-			};
-
-			spi0: spi@fffc8000 {
-				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				flash@1 {
-					compatible = "atmel,at45", "atmel,dataflash";
-					spi-max-frequency = <50000000>;
-					reg = <1>;
-				};
-			};
-
-			shdwc@fffffd10 {
-				atmel,wakeup-counter = <10>;
-				atmel,wakeup-rtt-timer;
-			};
-
-			rtc@fffffd20 {
-				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-
-			gpbr: syscon@fffffd50 {
-				status = "okay";
-			};
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						barebox@20000 {
-							label = "barebox";
-							reg = <0x20000 0x40000>;
-						};
-
-						bareboxenv@60000 {
-							label = "bareboxenv";
-							reg = <0x60000 0x20000>;
-						};
-
-						bareboxenv2@80000 {
-							label = "bareboxenv2";
-							reg = <0x80000 0x20000>;
-						};
-
-						oftree@80000 {
-							label = "oftree";
-							reg = <0xa0000 0x20000>;
-						};
-
-						kernel@a0000 {
-							label = "kernel";
-							reg = <0xc0000 0x400000>;
-						};
-
-						rootfs@4a0000 {
-							label = "rootfs";
-							reg = <0x4c0000 0x7800000>;
-						};
-
-						data@7ca0000 {
-							label = "data";
-							reg = <0x7cc0000 0x8340000>;
-						};
-					};
-				};
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-
-		24c512@50 {
-			compatible = "atmel,24c512";
-			reg = <0x50>;
-			vcc-supply = <&reg_3v3>;
-		};
-
-		wm8731: wm8731@1b {
-			compatible = "wm8731";
-			reg = <0x1b>;
-
-			/* PCK0 at 12MHz */
-			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
-			clock-names = "mclk";
-			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
-			assigned-clock-rates = <12000000>;
-
-			HPVDD-supply = <&vcc_dac>;
-			AVDD-supply = <&vcc_dac>;
-			DCVDD-supply = <&reg_3v3>;
-			DBVDD-supply = <&reg_3v3>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-3 {
-			label = "Button 3";
-			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
-			linux,code = <0x103>;
-			wakeup-source;
-		};
-
-		button-4 {
-			label = "Button 4";
-			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	sound {
-		compatible = "atmel,at91sam9g20ek-wm8731-audio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pck0_as_mck>;
-
-		atmel,model = "wm8731 @ AT91SAMG20EK";
-
-		atmel,audio-routing =
-			"Ext Spk", "LHPOUT",
-			"Int Mic", "MICIN";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8731>;
-	};
-
-	reg_5v: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_3v3: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		vin-supply = <&reg_5v>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_1v: fixedregulator2 {
-		compatible = "regulator-fixed";
-		regulator-name = "1V";
-		vin-supply = <&reg_5v>;
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-	};
-
-	vcc_dac: fixedregulator3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_DAC";
-		vin-supply = <&reg_3v3>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
deleted file mode 100644
index 92f2c05c873f6..0000000000000
--- a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for the GARDENA smart Gateway (Article No. 19000)
- *
- *  Copyright (C) 2020 GARDENA GmbH
- */
-
-/dts-v1/;
-
-#include "at91sam9g25.dtsi"
-#include "at91sam9x5ek.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "GARDENA smart Gateway (Article No. 19000)";
-	compatible = "gardena,smart-gateway-at91sam", "atmel,at91sam9g25", "atmel,at91sam9x5",
-		"atmel,at91sam9";
-
-	aliases {
-		serial1 = &usart3;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button {
-			label = "USER_BTN1";
-			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-		};
-	};
-
-	1wire_cm {
-		status = "disabled";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power_blue {
-			label = "smartgw:power:blue";
-			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		power_green {
-			label = "smartgw:power:green";
-			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		power_red {
-			label = "smartgw:power:red";
-			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		radio_blue {
-			label = "smartgw:radio:blue";
-			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		radio_green {
-			label = "smartgw:radio:green";
-			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		radio_red {
-			label = "smartgw:radio:red";
-			gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		internet_blue {
-			label = "smartgw:internet:blue";
-			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		internet_green {
-			label = "smartgw:internet:green";
-			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		internet_red {
-			label = "smartgw:internet:red";
-			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		heartbeat {
-			label = "smartgw:heartbeat";
-			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		pb18 {
-			status = "disabled";
-		};
-
-		pd21 {
-			status = "disabled";
-		};
-	};
-};
-
-&macb0 {
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&usart0 {
-	status = "disabled";
-};
-
-&usart2 {
-	status = "disabled";
-};
-
-&usart3 {
-	status = "okay";
-
-	pinctrl-0 = <&pinctrl_usart3
-		     &pinctrl_usart3_rts
-		     &pinctrl_usart3_cts
-		    >;
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&mmc0 {
-	status = "disabled";
-};
-
-&mmc1 {
-	status = "disabled";
-};
-
-&spi0 {
-	status = "disabled";
-};
-
-&i2c0 {
-	status = "disabled";
-};
-
-&adc0 {
-	status = "disabled";
-};
-
-&ssc0 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
deleted file mode 100644
index d2f13afb35eaf..0000000000000
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
- *
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-#include "at91sam9x5.dtsi"
-#include "at91sam9x5_isi.dtsi"
-#include "at91sam9x5_usart3.dtsi"
-#include "at91sam9x5_macb0.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G25 SoC";
-	compatible = "atmel,at91sam9g25", "atmel,at91sam9x5";
-
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				atmel,mux-mask = <
-				      /*    A         B          C     */
-				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
-				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
-				       0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
-				       0x003fffff 0x003f8000 0x00000000  /* pioD */
-				      >;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
deleted file mode 100644
index 61b0bdb615dc6..0000000000000
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-#include "at91sam9x5ek.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G25-EK";
-	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-};
-
-&i2c0 {
-	camera@30 {
-		compatible = "ovti,ov2640";
-		reg = <0x30>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
-		resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
-		pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
-		clocks = <&pmc PMC_TYPE_SYSTEM 8>;
-		clock-names = "xvclk";
-		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
-		assigned-clock-rates = <25000000>;
-		status = "okay";
-
-		port {
-			ov2640_0: endpoint {
-				remote-endpoint = <&isi_0>;
-				bus-width = <8>;
-			};
-		};
-	};
-};
-
-&isi {
-	status = "okay";
-
-	port {
-		isi_0: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&ov2640_0>;
-			bus-width = <8>;
-			vsync-active = <1>;
-			hsync-active = <1>;
-		};
-	};
-};
-
-&macb0 {
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&mmc1 {
-	status = "disabled";
-};
-
-&spi0 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
deleted file mode 100644
index 48c2bc4a7753d..0000000000000
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
- *
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-#include "at91sam9x5.dtsi"
-#include "at91sam9x5_lcd.dtsi"
-#include "at91sam9x5_macb0.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G35 SoC";
-	compatible = "atmel,at91sam9g35", "atmel,at91sam9x5";
-
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				atmel,mux-mask = <
-				      /*    A         B          C     */
-				       0xffffffff 0xffe0399f 0xc000000c  /* pioA */
-				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
-				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
-				       0x003fffff 0x003f8000 0x00000000  /* pioD */
-				      >;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts
deleted file mode 100644
index f966b56de63c2..0000000000000
--- a/arch/arm/boot/dts/at91sam9g35ek.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-/dts-v1/;
-#include "at91sam9g35.dtsi"
-#include "at91sam9x5dm.dtsi"
-#include "at91sam9x5ek.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G35-EK";
-	compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	backlight: backlight {
-		status = "okay";
-	};
-
-	bl_reg: backlight_regulator {
-		status = "okay";
-	};
-
-	panel: panel {
-		status = "okay";
-	};
-
-	panel_reg: panel_regulator {
-		status = "okay";
-	};
-};
-
-&hlcdc {
-	status = "okay";
-};
-
-&macb0 {
-	phy-mode = "rmii";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
deleted file mode 100644
index 95f5d76234dbb..0000000000000
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ /dev/null
@@ -1,1023 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
- *                    applies to AT91SAM9G45, AT91SAM9M10,
- *                    AT91SAM9G46, AT91SAM9M11 SoC
- *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-
-#include <dt-bindings/dma/at91.h>
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-#include <dt-bindings/mfd/at91-usart.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Atmel AT91SAM9G45 family SoC";
-	compatible = "atmel,at91sam9g45";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		gpio4 = &pioE;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		ssc0 = &ssc0;
-		ssc1 = &ssc1;
-		pwm0 = &pwm0;
-	};
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		adc_op_clk: adc_op_clk{
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <300000>;
-		};
-	};
-
-	sram: sram@300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x10000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x00300000 0x10000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <31>;
-			};
-
-			ramc0: ramc@ffffe400 {
-				compatible = "atmel,at91sam9g45-ddramc";
-				reg = <0xffffe400 0x200>;
-				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
-				clock-names = "ddrck";
-			};
-
-			ramc1: ramc@ffffe600 {
-				compatible = "atmel,at91sam9g45-ddramc";
-				reg = <0xffffe600 0x200>;
-				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
-				clock-names = "ddrck";
-			};
-
-			smc: smc@ffffe800 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffe800 0x200>;
-			};
-
-			matrix: matrix@ffffea00 {
-				compatible = "atmel,at91sam9g45-matrix", "syscon";
-				reg = <0xffffea00 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9g45-pmc", "syscon";
-				reg = <0xfffffc00 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				#clock-cells = <2>;
-				clocks = <&clk32k>, <&main_xtal>;
-				clock-names = "slow_clk", "main_xtal";
-			};
-
-			reset-controller@fffffd00 {
-				compatible = "atmel,at91sam9g45-rstc";
-				reg = <0xfffffd00 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			};
-
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9rl-shdwc";
-				reg = <0xfffffd10 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			tcb0: timer@fff7c000 {
-				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xfff7c000 0x100>;
-				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			tcb1: timer@fffd4000 {
-				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xfffd4000 0x100>;
-				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			dma: dma-controller@ffffec00 {
-				compatible = "atmel,at91sam9g45-dma";
-				reg = <0xffffec00 0x200>;
-				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
-				#dma-cells = <2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
-				clock-names = "dma_clk";
-			};
-
-			pinctrl@fffff200 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff200 0xfffff200 0xa00>;
-
-				atmel,mux-mask = <
-				      /*    A         B     */
-				       0xffffffff 0xffc003ff  /* pioA */
-				       0xffffffff 0x800f8f00  /* pioB */
-				       0xffffffff 0x00000e00  /* pioC */
-				       0xffffffff 0xff0c1381  /* pioD */
-				       0xffffffff 0x81ffff81  /* pioE */
-				      >;
-
-				/* shared pinctrl settings */
-				ac97 {
-					pinctrl_ac97: ac97-0 {
-						atmel,pins =
-							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97RX */
-							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97TX */
-							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97FS */
-							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* AC97CK */
-					};
-				};
-
-				adc0 {
-					pinctrl_adc0_adtrg: adc0_adtrg {
-						atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad0: adc0_ad0 {
-						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad1: adc0_ad1 {
-						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad2: adc0_ad2 {
-						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad3: adc0_ad3 {
-						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad4: adc0_ad4 {
-						atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad5: adc0_ad5 {
-						atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad6: adc0_ad6 {
-						atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad7: adc0_ad7 {
-						atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-				};
-
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				i2c0 {
-					pinctrl_i2c0: i2c0-0 {
-						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA21 periph A TWCK0 */
-							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A TWD0 */
-					};
-				};
-
-				i2c1 {
-					pinctrl_i2c1: i2c1-0 {
-						atmel,pins =
-							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A TWCK1 */
-							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A TWD1 */
-					};
-				};
-
-				isi {
-					pinctrl_isi_data_0_7: isi-0-data-0-7 {
-						atmel,pins =
-							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
-							AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
-							AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
-							AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
-							AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
-							AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
-							AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
-							AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
-							AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
-							AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
-							AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */
-					};
-
-					pinctrl_isi_data_8_9: isi-0-data-8-9 {
-						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
-							AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */
-					};
-
-					pinctrl_isi_data_10_11: isi-0-data-10-11 {
-						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
-							AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */
-					};
-				};
-
-				usart0 {
-					pinctrl_usart0: usart0-0 {
-						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart0_rts: usart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB17 periph B */
-					};
-
-					pinctrl_usart0_cts: usart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B */
-					};
-				};
-
-				usart1 {
-					pinctrl_usart1: usart1-0 {
-						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart1_rts: usart1_rts-0 {
-						atmel,pins =
-							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A */
-					};
-
-					pinctrl_usart1_cts: usart1_cts-0 {
-						atmel,pins =
-							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD17 periph A */
-					};
-				};
-
-				usart2 {
-					pinctrl_usart2: usart2-0 {
-						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart2_rts: usart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC9 periph B */
-					};
-
-					pinctrl_usart2_cts: usart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC11 periph B */
-					};
-				};
-
-				usart3 {
-					pinctrl_usart3: usart3-0 {
-						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart3_rts: usart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B */
-					};
-
-					pinctrl_usart3_cts: usart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA24 periph B */
-					};
-				};
-
-				nand {
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_cs: nand-cs-0 {
-						atmel,pins =
-							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				macb {
-					pinctrl_macb_rmii: macb_rmii-0 {
-						atmel,pins =
-							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
-							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
-							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
-							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
-							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
-							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
-							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
-							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
-							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA19 periph A */
-					};
-
-					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
-						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA6 periph B */
-							 AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA7 periph B */
-							 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA8 periph B */
-							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA9 periph B */
-							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
-							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
-							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA29 periph B */
-							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A */
-							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
-							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA2 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA3 periph A with pullup */
-							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA4 periph A with pullup */
-							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA5 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
-						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
-							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
-							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
-							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA9 periph A with pullup */
-					};
-				};
-
-				mmc1 {
-					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA31 periph A */
-							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA22 periph A with pullup */
-							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA23 periph A with pullup */
-					};
-
-					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA24 periph A with pullup */
-							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA25 periph A with pullup */
-							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA26 periph A with pullup */
-					};
-
-					pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
-						atmel,pins =
-							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA27 periph A with pullup */
-							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
-							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA29 periph A with pullup */
-							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA30 periph A with pullup */
-					};
-				};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD0 periph A */
-							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD1 periph A */
-							 AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD2 periph A */
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD3 periph A */
-							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD4 periph A */
-							 AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD5 periph A */
-					};
-				};
-
-				ssc1 {
-					pinctrl_ssc1_tx: ssc1_tx-0 {
-						atmel,pins =
-							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A */
-							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A */
-							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A */
-					};
-
-					pinctrl_ssc1_rx: ssc1_rx-0 {
-						atmel,pins =
-							<AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD13 periph A */
-							 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD14 periph A */
-							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD15 periph A */
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI0_MISO pin */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI0_MOSI pin */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI0_SPCK pin */
-					};
-				};
-
-				spi1 {
-					pinctrl_spi1: spi1-0 {
-						atmel,pins =
-							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A SPI1_MISO pin */
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A SPI1_MOSI pin */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB16 periph A SPI1_SPCK pin */
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb1 {
-					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
-						atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
-						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
-						atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
-						atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
-						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
-						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
-						atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
-						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
-						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				fb {
-					pinctrl_fb: fb-0 {
-						atmel,pins =
-							<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE0 periph A */
-							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE2 periph A */
-							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE3 periph A */
-							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE4 periph A */
-							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE5 periph A */
-							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE6 periph A */
-							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE7 periph A */
-							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE8 periph A */
-							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE9 periph A */
-							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE10 periph A */
-							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE11 periph A */
-							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE12 periph A */
-							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE13 periph A */
-							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE14 periph A */
-							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE15 periph A */
-							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE16 periph A */
-							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE17 periph A */
-							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE18 periph A */
-							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE19 periph A */
-							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE20 periph A */
-							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
-							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE22 periph A */
-							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
-							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
-							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
-							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
-							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
-							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
-							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
-							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
-					};
-				};
-
-				pioA: gpio@fffff200 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff200 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
-				};
-
-				pioB: gpio@fffff400 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
-				};
-
-				pioC: gpio@fffff600 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
-				};
-
-				pioD: gpio@fffff800 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
-				};
-
-				pioE: gpio@fffffa00 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffffa00 0x200>;
-					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
-				};
-			};
-
-			dbgu: serial@ffffee00 {
-				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				reg = <0xffffee00 0x200>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart0: serial@fff8c000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff8c000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@fff90000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff90000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@fff94000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff94000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart3: serial@fff98000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff98000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			macb0: ethernet@fffbc000 {
-				compatible = "cdns,at91sam9260-macb", "cdns,macb";
-				reg = <0xfffbc000 0x100>;
-				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_PERIPHERAL 25>;
-				clock-names = "hclk", "pclk";
-				status = "disabled";
-			};
-
-			trng@fffcc000 {
-				compatible = "atmel,at91sam9g45-trng";
-				reg = <0xfffcc000 0x100>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
-			};
-
-			i2c0: i2c@fff84000 {
-				compatible = "atmel,at91sam9g10-i2c";
-				reg = <0xfff84000 0x100>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@fff88000 {
-				compatible = "atmel,at91sam9g10-i2c";
-				reg = <0xfff88000 0x100>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
-				status = "disabled";
-			};
-
-			ssc0: ssc@fff9c000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xfff9c000 0x4000>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			ssc1: ssc@fffa0000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xfffa0000 0x4000>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			ac97: sound@fffac000 {
-				compatible = "atmel,at91sam9263-ac97c";
-				reg = <0xfffac000 0x4000>;
-				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ac97>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
-				clock-names = "ac97_clk";
-				status = "disabled";
-			};
-
-			adc0: adc@fffb0000 {
-				compatible = "atmel,at91sam9g45-adc";
-				reg = <0xfffb0000 0x100>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
-				clock-names = "adc_clk", "adc_op_clk";
-				atmel,adc-channels-used = <0xff>;
-				atmel,adc-vref = <3300>;
-				atmel,adc-startup-time = <40>;
-			};
-
-			isi@fffb4000 {
-				compatible = "atmel,at91sam9g45-isi";
-				reg = <0xfffb4000 0x4000>;
-				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
-				clock-names = "isi_clk";
-				status = "disabled";
-				port {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-			};
-
-			pwm0: pwm@fffb8000 {
-				compatible = "atmel,at91sam9rl-pwm";
-				reg = <0xfffb8000 0x300>;
-				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
-				#pwm-cells = <3>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
-				status = "disabled";
-			};
-
-			mmc0: mmc@fff80000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfff80000 0x600>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
-				dma-names = "rxtx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
-				clock-names = "mci_clk";
-				status = "disabled";
-			};
-
-			mmc1: mmc@fffd0000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfffd0000 0x600>;
-				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
-				dma-names = "rxtx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
-				clock-names = "mci_clk";
-				status = "disabled";
-			};
-
-			watchdog@fffffd40 {
-				compatible = "atmel,at91sam9260-wdt";
-				reg = <0xfffffd40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				atmel,watchdog-type = "hardware";
-				atmel,reset-type = "all";
-				atmel,dbg-halt;
-				status = "disabled";
-			};
-
-			spi0: spi@fffa4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffa4000 0x200>;
-				interrupts = <14 4 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			spi1: spi@fffa8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffa8000 0x200>;
-				interrupts = <15 4 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			usb2: gadget@fff78000 {
-				compatible = "atmel,at91sam9g45-udc";
-				reg = <0x00600000 0x80000
-				       0xfff78000 0x400>;
-				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
-				clock-names = "pclk", "hclk";
-				status = "disabled";
-			};
-
-			clk32k: sckc@fffffd50 {
-				compatible = "atmel,at91sam9x5-sckc";
-				reg = <0xfffffd50 0x4>;
-				clocks = <&slow_xtal>;
-				#clock-cells = <0>;
-			};
-
-			rtc@fffffd20 {
-				compatible = "atmel,at91sam9260-rtt";
-				reg = <0xfffffd20 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-			rtc@fffffdb0 {
-				compatible = "atmel,at91rm9200-rtc";
-				reg = <0xfffffdb0 0x30>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-			gpbr: syscon@fffffd60 {
-				compatible = "atmel,at91sam9260-gpbr", "syscon";
-				reg = <0xfffffd60 0x10>;
-				status = "disabled";
-			};
-		};
-
-		fb0: fb@500000 {
-			compatible = "atmel,at91sam9g45-lcdc";
-			reg = <0x00500000 0x1000>;
-			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_fb>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
-			clock-names = "hclk", "lcdc_clk";
-			status = "disabled";
-		};
-
-		usb0: ohci@700000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00700000 0x100000>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-
-		usb1: ehci@800000 {
-			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
-			reg = <0x00800000 0x100000>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
-			clock-names = "usb_clk", "ehci_clk";
-			status = "disabled";
-		};
-
-		ebi: ebi@10000000 {
-			compatible = "atmel,at91sam9g45-ebi";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc>;
-			atmel,matrix = <&matrix>;
-			reg = <0x10000000 0x80000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000>;
-			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			status = "disabled";
-
-			nand_controller: nand-controller {
-				compatible = "atmel,at91sam9g45-nand-controller";
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
deleted file mode 100644
index 7f45e81ca165c..0000000000000
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ /dev/null
@@ -1,393 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
- *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-/dts-v1/;
-#include "at91sam9g45.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Atmel AT91SAM9M10G45-EK";
-	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@70000000 {
-		reg = <0x70000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-		      clock-frequency = <32768>;
-		};
-
-		main_xtal {
-		      clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@ffffee00 {
-				status = "okay";
-			};
-
-			tcb0: timer@fff7c000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			usart1: serial@fff90000 {
-				pinctrl-0 =
-					<&pinctrl_usart1
-					 &pinctrl_usart1_rts
-					 &pinctrl_usart1_cts>;
-				status = "okay";
-			};
-
-			macb0: ethernet@fffbc000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			i2c0: i2c@fff84000 {
-				status = "okay";
-				ov2640: camera@30 {
-					compatible = "ovti,ov2640";
-					reg = <0x30>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
-					resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
-					pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
-					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
-					clock-names = "xvclk";
-					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
-					assigned-clock-rates = <25000000>;
-
-					port {
-						ov2640_0: endpoint {
-							remote-endpoint = <&isi_0>;
-							bus-width = <8>;
-						};
-					};
-				};
-			};
-
-			i2c1: i2c@fff88000 {
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-
-			mmc0: mmc@fff80000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0
-					&pinctrl_mmc0_slot0_clk_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				pinctrl-names = "default";
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			mmc1: mmc@fffd0000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc1
-					&pinctrl_mmc1_slot0_clk_cmd_dat0
-					&pinctrl_mmc1_slot0_dat1_3>;
-				pinctrl-names = "default";
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
-					wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			pinctrl@fffff200 {
-				camera_sensor {
-					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
-						atmel,pins =
-							<AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_sensor_reset: sensor_reset-0 {
-						atmel,pins =
-							<AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_sensor_power: sensor_power-0 {
-						atmel,pins =
-							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-				};
-				mmc0 {
-					pinctrl_board_mmc0: mmc0-board {
-						atmel,pins =
-							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD10 gpio CD pin pull up and deglitch */
-					};
-				};
-
-				mmc1 {
-					pinctrl_board_mmc1: mmc1-board {
-						atmel,pins =
-							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* PD11 gpio CD pin pull up and deglitch */
-							 AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PD29 gpio WP pin pull up */
-					};
-				};
-
-				pwm0 {
-					pinctrl_pwm_leds: pwm-led {
-						atmel,pins =
-							<AT91_PIOD 0  AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PD0 periph B */
-							 AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PD31 periph B */
-					};
-				};
-			};
-
-			spi0: spi@fffa4000{
-				status = "okay";
-				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
-				flash@0 {
-					compatible = "atmel,at45", "atmel,dataflash";
-					spi-max-frequency = <13000000>;
-					reg = <0>;
-				};
-			};
-
-			usb2: gadget@fff78000 {
-				atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			ac97: sound@fffac000 {
-				status = "okay";
-			};
-
-			adc0: adc@fffb0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <
-					&pinctrl_adc0_ad0
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					&pinctrl_adc0_ad5
-					&pinctrl_adc0_ad6
-					&pinctrl_adc0_ad7>;
-				atmel,adc-ts-wires = <4>;
-				status = "okay";
-			};
-
-			isi@fffb4000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_isi_data_0_7>;
-				status = "okay";
-				port {
-					isi_0: endpoint {
-						remote-endpoint = <&ov2640_0>;
-						bus-width = <8>;
-						vsync-active = <1>;
-						hsync-active = <1>;
-					};
-				};
-			};
-
-			pwm0: pwm@fffb8000 {
-				status = "okay";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pwm_leds>;
-			};
-
-			rtc@fffffd20 {
-				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-				status = "okay";
-			};
-
-			gpbr: syscon@fffffd60 {
-				status = "okay";
-			};
-
-			rtc@fffffdb0 {
-				status = "okay";
-			};
-		};
-
-		fb0: fb@500000 {
-			display = <&display0>;
-			status = "okay";
-
-			display0: panel {
-				bits-per-pixel = <32>;
-				atmel,lcdcon-backlight;
-				atmel,dmacon = <0x1>;
-				atmel,lcdcon2 = <0x80008002>;
-				atmel,guard-time = <9>;
-				atmel,lcd-wiring-mode = "RGB";
-
-				display-timings {
-					native-mode = <&timing0>;
-					timing0: timing0 {
-						clock-frequency = <9000000>;
-						hactive = <480>;
-						vactive = <272>;
-						hback-porch = <1>;
-						hfront-porch = <1>;
-						vback-porch = <40>;
-						vfront-porch = <1>;
-						hsync-len = <45>;
-						vsync-len = <1>;
-					};
-				};
-			};
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						boot@0 {
-							label = "bootstrap/uboot/kernel";
-							reg = <0x0 0x400000>;
-						};
-
-						rootfs@400000 {
-							label = "rootfs";
-							reg = <0x400000 0x3C00000>;
-						};
-
-						data@4000000 {
-							label = "data";
-							reg = <0x4000000 0xC000000>;
-						};
-					};
-				};
-			};
-		};
-
-		usb0: ohci@700000 {
-			status = "okay";
-			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
-					   &pioD 3 GPIO_ACTIVE_LOW>;
-		};
-
-		usb1: ehci@800000 {
-			status = "okay";
-		};
-	};
-
-	led-controller-1 {
-		compatible = "gpio-leds";
-
-		led-1 {
-			label = "d8";
-			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	led-controller-2 {
-		compatible = "pwm-leds";
-
-		led-2 {
-			label = "d6";
-			pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "nand-disk";
-		};
-
-		led-3 {
-			label = "d7";
-			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-left-click {
-			label = "left_click";
-			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
-			linux,code = <272>;
-			wakeup-source;
-		};
-
-		button-right-click {
-			label = "right_click";
-			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
-			linux,code = <273>;
-			wakeup-source;
-		};
-
-		button-left {
-			label = "Joystick Left";
-			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
-			linux,code = <105>;
-		};
-
-		button-right {
-			label = "Joystick Right";
-			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
-			linux,code = <106>;
-		};
-
-		button-up {
-			label = "Joystick Up";
-			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
-			linux,code = <103>;
-		};
-
-		button-down {
-			label = "Joystick Down";
-			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
-			linux,code = <108>;
-		};
-
-		button-enter {
-			label = "Joystick Press";
-			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
-			linux,code = <28>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
deleted file mode 100644
index 83114d26f10d0..0000000000000
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ /dev/null
@@ -1,816 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Hong Xu <hong.xu@atmel.com>
- */
-
-#include <dt-bindings/dma/at91.h>
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-#include <dt-bindings/mfd/at91-usart.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Atmel AT91SAM9N12 SoC";
-	compatible = "atmel,at91sam9n12";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		ssc0 = &ssc0;
-		pwm0 = &pwm0;
-	};
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	sram: sram@300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x8000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x00300000 0x8000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <31>;
-			};
-
-			matrix: matrix@ffffde00 {
-				compatible = "atmel,at91sam9n12-matrix", "syscon";
-				reg = <0xffffde00 0x100>;
-			};
-
-			pmecc: ecc-engine@ffffe000 {
-				compatible = "atmel,at91sam9g45-pmecc";
-				reg = <0xffffe000 0x600>,
-				      <0xffffe600 0x200>;
-			};
-
-			ramc0: ramc@ffffe800 {
-				compatible = "atmel,at91sam9g45-ddramc";
-				reg = <0xffffe800 0x200>;
-				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
-				clock-names = "ddrck";
-			};
-
-			smc: smc@ffffea00 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffea00 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9n12-pmc", "syscon";
-				reg = <0xfffffc00 0x200>;
-				#clock-cells = <2>;
-				clocks = <&clk32k>, <&main_xtal>;
-				clock-names = "slow_clk", "main_xtal";
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-			};
-
-			reset-controller@fffffe00 {
-				compatible = "atmel,at91sam9g45-rstc";
-				reg = <0xfffffe00 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			pit: timer@fffffe30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffe30 0xf>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			};
-
-			shdwc@fffffe10 {
-				compatible = "atmel,at91sam9x5-shdwc";
-				reg = <0xfffffe10 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			sckc@fffffe50 {
-				compatible = "atmel,at91sam9x5-sckc";
-				reg = <0xfffffe50 0x4>;
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					clocks = <&slow_xtal>;
-				};
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <50000000>;
-				};
-
-				clk32k: slck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc>, <&slow_osc>;
-				};
-			};
-
-			mmc0: mmc@f0008000 {
-				compatible = "atmel,hsmci";
-				reg = <0xf0008000 0x600>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
-				dma-names = "rxtx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
-				clock-names = "mci_clk";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			tcb0: timer@f8008000 {
-				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xf8008000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
-				clock-names = "t0_clk", "slow_clk";
-			};
-
-			tcb1: timer@f800c000 {
-				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xf800c000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
-				clock-names = "t0_clk", "slow_clk";
-			};
-
-			hlcdc: hlcdc@f8038000 {
-				compatible = "atmel,at91sam9n12-hlcdc";
-				reg = <0xf8038000 0x2000>;
-				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
-				clock-names = "periph_clk", "sys_clk", "slow_clk";
-				status = "disabled";
-
-				hlcdc-display-controller {
-					compatible = "atmel,hlcdc-display-controller";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						reg = <0>;
-					};
-				};
-
-				hlcdc_pwm: hlcdc-pwm {
-					compatible = "atmel,hlcdc-pwm";
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_lcd_pwm>;
-					#pwm-cells = <3>;
-				};
-			};
-
-			dma: dma-controller@ffffec00 {
-				compatible = "atmel,at91sam9g45-dma";
-				reg = <0xffffec00 0x200>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				#dma-cells = <2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
-				clock-names = "dma_clk";
-			};
-
-			pinctrl@fffff400 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff400 0xfffff400 0x800>;
-
-				atmel,mux-mask = <
-				      /*    A         B          C     */
-				       0xffffffff 0xffe07983 0x00000000  /* pioA */
-				       0x00040000 0x00047e0f 0x00000000  /* pioB */
-				       0xfdffffff 0x07c00000 0xb83fffff  /* pioC */
-				       0x003fffff 0x003f8000 0x00000000  /* pioD */
-				      >;
-
-				/* shared pinctrl settings */
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				lcd {
-					pinctrl_lcd_base: lcd-base-0 {
-						atmel,pins =
-							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
-							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
-							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
-							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
-							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
-					};
-
-					pinctrl_lcd_pwm: lcd-pwm-0 {
-						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
-					};
-
-					pinctrl_lcd_rgb888: lcd-rgb-3 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
-							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
-							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
-							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
-							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
-							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
-							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
-							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
-							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
-							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
-							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
-							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
-							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
-							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
-							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
-							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
-							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
-							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
-							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
-							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
-							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
-							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
-							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
-							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
-					};
-				};
-
-				usart0 {
-					pinctrl_usart0: usart0-0 {
-						atmel,pins =
-							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
-							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA0 periph A */
-					};
-
-					pinctrl_usart0_rts: usart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
-					};
-
-					pinctrl_usart0_cts: usart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
-					};
-				};
-
-				usart1 {
-					pinctrl_usart1: usart1-0 {
-						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
-							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
-					};
-				};
-
-				usart2 {
-					pinctrl_usart2: usart2-0 {
-						atmel,pins =
-							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
-							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA7 periph A */
-					};
-
-					pinctrl_usart2_rts: usart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
-					};
-
-					pinctrl_usart2_cts: usart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
-					};
-				};
-
-				usart3 {
-					pinctrl_usart3: usart3-0 {
-						atmel,pins =
-							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC23 periph B with pullup */
-							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC22 periph B */
-					};
-
-					pinctrl_usart3_rts: usart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC24 periph B */
-					};
-
-					pinctrl_usart3_cts: usart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC25 periph B */
-					};
-				};
-
-				uart0 {
-					pinctrl_uart0: uart0-0 {
-						atmel,pins =
-							<AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* PC9 periph C with pullup */
-							 AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC8 periph C */
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1: uart1-0 {
-						atmel,pins =
-							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE
-							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				nand {
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_cs: nand-cs-0 {
-						atmel,pins =
-							 <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
-							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
-							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
-							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
-							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
-						atmel,pins =
-							<AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
-							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
-							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA13 periph B with pullup */
-							 AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA14 periph B with pullup */
-					};
-				};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
-							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
-							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
-							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
-							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
-							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
-					};
-				};
-
-				spi1 {
-					pinctrl_spi1: spi1-0 {
-						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
-							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
-							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
-					};
-				};
-
-				i2c0 {
-					pinctrl_i2c0: i2c0-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				i2c1 {
-					pinctrl_i2c1: i2c1-0 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
-							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb1 {
-					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
-						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
-						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
-						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
-						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
-						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
-						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
-						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
-						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
-						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-				};
-
-				pioA: gpio@fffff400 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
-				};
-
-				pioB: gpio@fffff600 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
-				};
-
-				pioC: gpio@fffff800 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
-				};
-
-				pioD: gpio@fffffa00 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffffa00 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			ssc0: ssc@f0010000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xf0010000 0x4000>;
-				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
-				dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
-				       <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			usart0: serial@f801c000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf801c000 0x4000>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@f8020000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8020000 0x4000>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@f8024000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8024000 0x4000>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart3: serial@f8028000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8028000 0x4000>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			i2c0: i2c@f8010000 {
-				compatible = "atmel,at91sam9x5-i2c";
-				reg = <0xf8010000 0x100>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>,
-				       <&dma 1 AT91_DMA_CFG_PER_ID(14)>;
-				dma-names = "tx", "rx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@f8014000 {
-				compatible = "atmel,at91sam9x5-i2c";
-				reg = <0xf8014000 0x100>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>,
-				       <&dma 1 AT91_DMA_CFG_PER_ID(16)>;
-				dma-names = "tx", "rx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
-				status = "disabled";
-			};
-
-			spi0: spi@f0000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xf0000000 0x100>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>,
-				       <&dma 1 AT91_DMA_CFG_PER_ID(2)>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			spi1: spi@f0004000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xf0004000 0x100>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>,
-				       <&dma 1 AT91_DMA_CFG_PER_ID(4)>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			watchdog@fffffe40 {
-				compatible = "atmel,at91sam9260-wdt";
-				reg = <0xfffffe40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				atmel,watchdog-type = "hardware";
-				atmel,reset-type = "all";
-				atmel,dbg-halt;
-				status = "disabled";
-			};
-
-			rtc@fffffeb0 {
-				compatible = "atmel,at91rm9200-rtc";
-				reg = <0xfffffeb0 0x40>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-			pwm0: pwm@f8034000 {
-				compatible = "atmel,at91sam9rl-pwm";
-				reg = <0xf8034000 0x300>;
-				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
-				#pwm-cells = <3>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
-				status = "disabled";
-			};
-
-			usb1: gadget@f803c000 {
-				compatible = "atmel,at91sam9260-udc";
-				reg = <0xf803c000 0x4000>;
-				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 7>;
-				clock-names = "pclk", "hclk";
-				status = "disabled";
-			};
-		};
-
-		usb0: ohci@500000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00500000 0x00100000>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-
-		ebi: ebi@10000000 {
-			compatible = "atmel,at91sam9x5-ebi";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc>;
-			atmel,matrix = <&matrix>;
-			reg = <0x10000000 0x60000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000>;
-			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			status = "disabled";
-
-			nand_controller: nand-controller {
-				compatible = "atmel,at91sam9g45-nand-controller";
-				ecc-engine = <&pmecc>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
deleted file mode 100644
index 4c644d4c6be72..0000000000000
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ /dev/null
@@ -1,285 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Hong Xu <hong.xu@atmel.com>
- */
-/dts-v1/;
-#include "at91sam9n12.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9N12-EK";
-	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "root=/dev/mtdblock1 rw rootfstype=jffs2";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <16000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			ssc0: ssc@f0010000 {
-				status = "okay";
-			};
-
-			tcb0: timer@f8008000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			i2c0: i2c@f8010000 {
-				status = "okay";
-
-				wm8904: codec@1a {
-					compatible = "wlf,wm8904";
-					reg = <0x1a>;
-					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
-					clock-names = "mclk";
-				};
-
-				qt1070: keyboard@1b {
-					compatible = "qt1070";
-					reg = <0x1b>;
-					interrupt-parent = <&pioA>;
-					interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_qt1070_irq>;
-				};
-			};
-
-			mmc0: mmc@f0008000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0
-					&pinctrl_mmc0_slot0_clk_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			pinctrl@fffff400 {
-				mmc0 {
-					pinctrl_board_mmc0: mmc0-board {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PA7 gpio CD pin pull up and deglitch */
-					};
-				};
-
-				qt1070 {
-					pinctrl_qt1070_irq: qt1070_irq {
-						atmel,pins =
-							<AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-				};
-
-				sound {
-					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
-						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usb1 {
-					pinctrl_usb1_vbus_sense: usb1_vbus_sense {
-						atmel,pins =
-							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PB16 gpio usb vbus sense, no pull up and deglitch */
-					};
-				};
-			};
-
-			spi0: spi@f0000000 {
-				status = "okay";
-				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-				flash@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			hlcdc: hlcdc@f8038000 {
-				status = "okay";
-
-				hlcdc-display-controller {
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-
-					port@0 {
-						hlcdc_panel_output: endpoint@0 {
-							reg = <0>;
-							remote-endpoint = <&panel_input>;
-						};
-					};
-				};
-			};
-
-			usb1: gadget@f803c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usb1_vbus_sense>;
-				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-
-			rtc@fffffeb0 {
-				status = "okay";
-			};
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-ecc-strength = <2>;
-					nand-ecc-step-size = <512>;
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-				};
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <1>;
-			atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 50000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		power-supply = <&bl_reg>;
-		status = "okay";
-	};
-
-	bl_reg: backlight_regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "backlight-power-supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		d8 {
-			label = "d8";
-			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "mmc0";
-		};
-
-		d9 {
-			label = "d9";
-			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "nand-disk";
-		};
-
-		d10 {
-			label = "d10";
-			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-enter {
-			label = "Enter";
-			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
-			linux,code = <28>;
-			wakeup-source;
-		};
-	};
-
-	panel: panel {
-		compatible = "qiaodian,qd43003c0-40";
-		backlight = <&backlight>;
-		power-supply = <&panel_reg>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&hlcdc_panel_output>;
-			};
-		};
-	};
-
-	panel_reg: panel_regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "panel-power-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		status = "okay";
-	};
-
-	sound {
-		compatible = "atmel,asoc-wm8904";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
-
-		atmel,model = "wm8904 @ AT91SAM9N12";
-		atmel,audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"IN2L", "Line In Jack",
-			"IN2R", "Line In Jack",
-			"Mic", "MICBIAS",
-			"IN1L", "Mic";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8904>;
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
deleted file mode 100644
index 364a2ff0a763d..0000000000000
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ /dev/null
@@ -1,861 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
- *
- *  Copyright (C) 2014 Microchip
- *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
- */
-
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/clock/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/mfd/at91-usart.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Atmel AT91SAM9RL family SoC";
-	compatible = "atmel,at91sam9rl", "atmel,at91sam9";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		tcb0 = &tcb0;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		ssc0 = &ssc0;
-		ssc1 = &ssc1;
-		pwm0 = &pwm0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x04000000>;
-	};
-
-	clocks {
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		adc_op_clk: adc_op_clk{
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-		};
-	};
-
-	sram: sram@300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x10000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x00300000 0x10000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		fb0: fb@500000 {
-			compatible = "atmel,at91sam9rl-lcdc";
-			reg = <0x00500000 0x1000>;
-			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_fb>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
-			clock-names = "hclk", "lcdc_clk";
-			status = "disabled";
-		};
-
-		ebi: ebi@10000000 {
-			compatible = "atmel,at91sam9rl-ebi";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc>;
-			atmel,matrix = <&matrix>;
-			reg = <0x10000000 0x80000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000>;
-			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			status = "disabled";
-
-			nand_controller: nand-controller {
-				compatible = "atmel,at91sam9g45-nand-controller";
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xfffa0000 0x100>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <17 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>, <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			mmc0: mmc@fffa4000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfffa4000 0x600>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
-				clock-names = "mci_clk";
-				status = "disabled";
-			};
-
-			i2c0: i2c@fffa8000 {
-				compatible = "atmel,at91sam9260-i2c";
-				reg = <0xfffa8000 0x100>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@fffac000 {
-				compatible = "atmel,at91sam9260-i2c";
-				reg = <0xfffac000 0x100>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			usart0: serial@fffb0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb0000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@fffb4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb4000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@fffb8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb8000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart3: serial@fffbc000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffbc000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			ssc0: ssc@fffc0000 {
-				compatible = "atmel,at91sam9rl-ssc";
-				reg = <0xfffc0000 0x4000>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				status = "disabled";
-			};
-
-			ssc1: ssc@fffc4000 {
-				compatible = "atmel,at91sam9rl-ssc";
-				reg = <0xfffc4000 0x4000>;
-				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				status = "disabled";
-			};
-
-			pwm0: pwm@fffc8000 {
-				compatible = "atmel,at91sam9rl-pwm";
-				reg = <0xfffc8000 0x300>;
-				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
-				#pwm-cells = <3>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
-				clock-names = "pwm_clk";
-				status = "disabled";
-			};
-
-			spi0: spi@fffcc000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffcc000 0x200>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			adc0: adc@fffd0000 {
-				compatible = "atmel,at91sam9rl-adc";
-				reg = <0xfffd0000 0x100>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
-				clock-names = "adc_clk", "adc_op_clk";
-				atmel,adc-use-external-triggers;
-				atmel,adc-channels-used = <0x3f>;
-				atmel,adc-vref = <3300>;
-				atmel,adc-startup-time = <40>;
-			};
-
-			usb0: gadget@fffd4000 {
-				compatible = "atmel,at91sam9rl-udc";
-				reg = <0x00600000 0x100000>,
-				      <0xfffd4000 0x4000>;
-				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
-				clock-names = "pclk", "hclk";
-				status = "disabled";
-			};
-
-			dma0: dma-controller@ffffe600 {
-				compatible = "atmel,at91sam9rl-dma";
-				reg = <0xffffe600 0x200>;
-				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
-				#dma-cells = <2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
-				clock-names = "dma_clk";
-			};
-
-			ramc0: ramc@ffffea00 {
-				compatible = "atmel,at91sam9260-sdramc";
-				reg = <0xffffea00 0x200>;
-			};
-
-			smc: smc@ffffec00 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffec00 0x200>;
-			};
-
-			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9rl-matrix", "syscon";
-				reg = <0xffffee00 0x200>;
-			};
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <31>;
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			pinctrl@fffff400 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff400 0xfffff400 0x800>;
-
-				atmel,mux-mask =
-					/*    A         B     */
-					<0xffffffff 0xe05c6738>,  /* pioA */
-					<0xffffffff 0x0000c780>,  /* pioB */
-					<0xffffffff 0xe3ffff0e>,  /* pioC */
-					<0x003fffff 0x0001ff3c>;  /* pioD */
-
-				/* shared pinctrl settings */
-				adc0 {
-					pinctrl_adc0_ts: adc0_ts-0 {
-						atmel,pins =
-							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_ad0: adc0_ad0-0 {
-						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_ad1: adc0_ad1-0 {
-						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_ad2: adc0_ad2-0 {
-						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_ad3: adc0_ad3-0 {
-						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_ad4: adc0_ad4-0 {
-						atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_ad5: adc0_ad5-0 {
-						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_adtrg: adc0_adtrg-0 {
-						atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				ebi {
-					pinctrl_ebi_addr_nand: ebi-addr-0 {
-						atmel,pins =
-							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				fb {
-					pinctrl_fb: fb-0 {
-						atmel,pins =
-							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				i2c_gpio0 {
-					pinctrl_i2c_gpio0: i2c_gpio0-0 {
-						atmel,pins =
-							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
-							<AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
-					};
-				};
-
-				i2c_gpio1 {
-					pinctrl_i2c_gpio1: i2c_gpio1-0 {
-						atmel,pins =
-							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
-							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_clk: mmc0_clk-0 {
-						atmel,pins =
-							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				nand {
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_cs: nand-cs-0 {
-						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_oe_we: nand-oe-we-0 {
-						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				pwm0 {
-					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
-						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
-						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
-						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
-						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
-						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
-						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
-						atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
-						atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 {
-						atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
-						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
-						atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				ssc1 {
-					pinctrl_ssc1_tx: ssc1_tx-0 {
-						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ssc1_rx: ssc1_rx-0 {
-						atmel,pins =
-							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart0 {
-					pinctrl_usart0: usart0-0 {
-						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart0_rts: usart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart0_cts: usart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
-						atmel,pins =
-							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart0_dcd: usart0_dcd-0 {
-						atmel,pins =
-							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart0_ri: usart0_ri-0 {
-						atmel,pins =
-							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart0_sck: usart0_sck-0 {
-						atmel,pins =
-							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart1 {
-					pinctrl_usart1: usart1-0 {
-						atmel,pins =
-							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart1_rts: usart1_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart1_cts: usart1_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart1_sck: usart1_sck-0 {
-						atmel,pins =
-							<AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart2 {
-					pinctrl_usart2: usart2-0 {
-						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart2_rts: usart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart2_cts: usart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart2_sck: usart2_sck-0 {
-						atmel,pins =
-							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart3 {
-					pinctrl_usart3: usart3-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart3_rts: usart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart3_cts: usart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart3_sck: usart3_sck-0 {
-						atmel,pins =
-							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				pioA: gpio@fffff400 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
-				};
-
-				pioB: gpio@fffff600 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
-				};
-
-				pioC: gpio@fffff800 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
-				};
-
-				pioD: gpio@fffffa00 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffffa00 0x200>;
-					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
-				};
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9rl-pmc", "syscon";
-				reg = <0xfffffc00 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				#clock-cells = <2>;
-				clocks = <&clk32k>, <&main_xtal>;
-				clock-names = "slow_clk", "main_xtal";
-			};
-
-			reset-controller@fffffd00 {
-				compatible = "atmel,at91sam9260-rstc";
-				reg = <0xfffffd00 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9260-shdwc";
-				reg = <0xfffffd10 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			};
-
-			watchdog@fffffd40 {
-				compatible = "atmel,at91sam9260-wdt";
-				reg = <0xfffffd40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-			clk32k: sckc@fffffd50 {
-				compatible = "atmel,at91sam9x5-sckc";
-				reg = <0xfffffd50 0x4>;
-				clocks = <&slow_xtal>;
-				#clock-cells = <0>;
-			};
-
-			rtc@fffffd20 {
-				compatible = "atmel,at91sam9260-rtt";
-				reg = <0xfffffd20 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-			gpbr: syscon@fffffd60 {
-				compatible = "atmel,at91sam9260-gpbr", "syscon";
-				reg = <0xfffffd60 0x10>;
-				status = "disabled";
-			};
-
-			rtc@fffffe00 {
-				compatible = "atmel,at91rm9200-rtc";
-				reg = <0xfffffe00 0x40>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio0>;
-		status = "disabled";
-	};
-
-	i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio1>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
deleted file mode 100644
index a57351270551a..0000000000000
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ /dev/null
@@ -1,276 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
- *
- *  Copyright (C) 2014 Microchip
- *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
- */
-/dts-v1/;
-#include "at91sam9rl.dtsi"
-
-/ {
-	model = "Atmel at91sam9rlek";
-	compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		fb0: fb@500000 {
-			display = <&display0>;
-			status = "okay";
-
-			display0: panel {
-				bits-per-pixel = <16>;
-				atmel,lcdcon-backlight;
-				atmel,dmacon = <0x1>;
-				atmel,lcdcon2 = <0x80008002>;
-				atmel,guard-time = <1>;
-				atmel,lcd-wiring-mode = "RGB";
-
-				display-timings {
-					native-mode = <&timing0>;
-					timing0: timing0 {
-						clock-frequency = <4965000>;
-						hactive = <240>;
-						vactive = <320>;
-						hback-porch = <1>;
-						hfront-porch = <33>;
-						vback-porch = <1>;
-						vfront-porch = <0>;
-						hsync-len = <5>;
-						vsync-len = <1>;
-						hsync-active = <1>;
-						vsync-active = <1>;
-					};
-				};
-			};
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_addr_nand>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_oe_we
-					     &pinctrl_nand_cs
-					     &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						bootloader@40000 {
-							label = "bootloader";
-							reg = <0x40000 0x80000>;
-						};
-
-						bootloaderenv@c0000 {
-							label = "bootloader env";
-							reg = <0xc0000 0xc0000>;
-						};
-
-						dtb@180000 {
-							label = "device tree";
-							reg = <0x180000 0x80000>;
-						};
-
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
-						};
-
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
-						};
-					};
-				};
-			};
-		};
-
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			mmc0: mmc@fffa4000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0
-					&pinctrl_mmc0_clk
-					&pinctrl_mmc0_slot0_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 = <
-					&pinctrl_usart0
-					&pinctrl_usart0_rts
-					&pinctrl_usart0_cts>;
-				status = "okay";
-			};
-
-			adc0: adc@fffd0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <
-					&pinctrl_adc0_ad0
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					&pinctrl_adc0_ad5
-					&pinctrl_adc0_adtrg>;
-				atmel,adc-ts-wires = <4>;
-				status = "okay";
-			};
-
-			usb0: gadget@fffd4000 {
-				atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			spi0: spi@fffcc000 {
-				status = "okay";
-				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
-				flash@0 {
-					compatible = "atmel,at45", "atmel,dataflash";
-					spi-max-frequency = <15000000>;
-					reg = <0>;
-				};
-			};
-
-			pwm0: pwm@fffc8000 {
-				status = "okay";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pwm0_pwm1_2>,
-					<&pinctrl_pwm0_pwm2_2>;
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				mmc0 {
-					pinctrl_board_mmc0: mmc0-board {
-						atmel,pins =
-							<AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-				};
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-
-			rtc@fffffd20 {
-				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-			};
-
-			rtc@fffffe00 {
-				status = "okay";
-			};
-		};
-	};
-
-	led-controller-1 {
-		compatible = "pwm-leds";
-
-		led-1 {
-			label = "ds1";
-			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-		};
-
-		led-2 {
-			label = "ds2";
-			pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-		};
-	};
-
-	led-controller-2 {
-		compatible = "gpio-leds";
-
-		led-3 {
-			label = "ds3";
-			gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-right-click {
-			label = "right_click";
-			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
-			linux,code = <273>;
-			wakeup-source;
-		};
-
-		button-left-click {
-			label = "left_click";
-			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
-			linux,code = <272>;
-			wakeup-source;
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-	};
-
-	i2c-gpio-1 {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
deleted file mode 100644
index 0fe8802e1242b..0000000000000
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
- *
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-#include "at91sam9x5.dtsi"
-#include "at91sam9x5_usart3.dtsi"
-#include "at91sam9x5_macb0.dtsi"
-#include "at91sam9x5_macb1.dtsi"
-#include "at91sam9x5_can.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9X25 SoC";
-	compatible = "atmel,at91sam9x25", "atmel,at91sam9x5";
-
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				atmel,mux-mask = <
-				      /*    A         B          C     */
-				       0xffffffff 0xffe03fff 0xc000001c  /* pioA */
-				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
-				       0x80000000 0xfffd0000 0xb83fffff  /* pioC */
-				       0x003fffff 0x003f8000 0x00000000  /* pioD */
-				      >;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
deleted file mode 100644
index ad7c6b36f0bac..0000000000000
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-/dts-v1/;
-#include "at91sam9x25.dtsi"
-#include "at91sam9x5ek.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9X25-EK";
-	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&macb0 {
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&macb1 {
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
deleted file mode 100644
index 0bfa21f18f870..0000000000000
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
- *
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-#include "at91sam9x5.dtsi"
-#include "at91sam9x5_lcd.dtsi"
-#include "at91sam9x5_macb0.dtsi"
-#include "at91sam9x5_can.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9X35 SoC";
-	compatible = "atmel,at91sam9x35", "atmel,at91sam9x5";
-
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				atmel,mux-mask = <
-				      /*    A         B          C     */
-				       0xffffffff 0xffe03fff 0xc000000c  /* pioA */
-				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
-				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
-				       0x003fffff 0x003f8000 0x00000000  /* pioD */
-				      >;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts
deleted file mode 100644
index 66675c787b97d..0000000000000
--- a/arch/arm/boot/dts/at91sam9x35ek.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-/dts-v1/;
-#include "at91sam9x35.dtsi"
-#include "at91sam9x5dm.dtsi"
-#include "at91sam9x5ek.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9X35-EK";
-	compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&bl_reg {
-	status = "okay";
-};
-
-&hlcdc {
-	status = "okay";
-};
-
-&macb0 {
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&panel {
-	status = "okay";
-};
-
-&panel_reg {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
deleted file mode 100644
index 0c26c925761b2..0000000000000
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ /dev/null
@@ -1,978 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
- *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
- *                   AT91SAM9X25, AT91SAM9X35 SoC
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-
-#include <dt-bindings/dma/at91.h>
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-#include <dt-bindings/mfd/at91-usart.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Atmel AT91SAM9x5 family SoC";
-	compatible = "atmel,at91sam9x5";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		ssc0 = &ssc0;
-		pwm0 = &pwm0;
-	};
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		adc_op_clk: adc_op_clk{
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-		};
-	};
-
-	sram: sram@300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x8000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x00300000 0x8000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <31>;
-			};
-
-			matrix: matrix@ffffde00 {
-				compatible = "atmel,at91sam9x5-matrix", "syscon";
-				reg = <0xffffde00 0x100>;
-			};
-
-			pmecc: ecc-engine@ffffe000 {
-				compatible = "atmel,at91sam9g45-pmecc";
-				reg = <0xffffe000 0x600>,
-				      <0xffffe600 0x200>;
-			};
-
-			ramc0: ramc@ffffe800 {
-				compatible = "atmel,at91sam9g45-ddramc";
-				reg = <0xffffe800 0x200>;
-				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
-				clock-names = "ddrck";
-			};
-
-			smc: smc@ffffea00 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffea00 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9x5-pmc", "syscon";
-				reg = <0xfffffc00 0x200>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				#clock-cells = <2>;
-				clocks = <&clk32k>, <&main_xtal>;
-				clock-names = "slow_clk", "main_xtal";
-			};
-
-			reset_controller: reset-controller@fffffe00 {
-				compatible = "atmel,at91sam9g45-rstc";
-				reg = <0xfffffe00 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			shutdown_controller: shdwc@fffffe10 {
-				compatible = "atmel,at91sam9x5-shdwc";
-				reg = <0xfffffe10 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			pit: timer@fffffe30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffe30 0xf>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			};
-
-			clk32k: sckc@fffffe50 {
-				compatible = "atmel,at91sam9x5-sckc";
-				reg = <0xfffffe50 0x4>;
-				clocks = <&slow_xtal>;
-				#clock-cells = <0>;
-			};
-
-			tcb0: timer@f8008000 {
-				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xf8008000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
-				clock-names = "t0_clk", "slow_clk";
-			};
-
-			tcb1: timer@f800c000 {
-				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xf800c000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
-				clock-names = "t0_clk", "slow_clk";
-			};
-
-			dma0: dma-controller@ffffec00 {
-				compatible = "atmel,at91sam9g45-dma";
-				reg = <0xffffec00 0x200>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				#dma-cells = <2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
-				clock-names = "dma_clk";
-			};
-
-			dma1: dma-controller@ffffee00 {
-				compatible = "atmel,at91sam9g45-dma";
-				reg = <0xffffee00 0x200>;
-				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
-				#dma-cells = <2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
-				clock-names = "dma_clk";
-			};
-
-			pinctrl: pinctrl@fffff400 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff400 0xfffff400 0x800>;
-
-				/* shared pinctrl settings */
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				ebi {
-					pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
-						atmel,pins =
-							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ebi_data_8_15: ebi-data-msb-0 {
-						atmel,pins =
-							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ebi_addr_nand: ebi-addr-0 {
-						atmel,pins =
-							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart0 {
-					pinctrl_usart0: usart0-0 {
-						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart0_rts: usart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
-					};
-
-					pinctrl_usart0_cts: usart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
-					};
-
-					pinctrl_usart0_sck: usart0_sck-0 {
-						atmel,pins =
-							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
-					};
-				};
-
-				usart1 {
-					pinctrl_usart1: usart1-0 {
-						atmel,pins =
-							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart1_rts: usart1_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC27 periph C */
-					};
-
-					pinctrl_usart1_cts: usart1_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C */
-					};
-
-					pinctrl_usart1_sck: usart1_sck-0 {
-						atmel,pins =
-							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC29 periph C */
-					};
-				};
-
-				usart2 {
-					pinctrl_usart2: usart2-0 {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart2_rts: usart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
-					};
-
-					pinctrl_usart2_cts: usart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
-					};
-
-					pinctrl_usart2_sck: usart2_sck-0 {
-						atmel,pins =
-							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
-					};
-				};
-
-				uart0 {
-					pinctrl_uart0: uart0-0 {
-						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC8 periph C */
-							 AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC9 periph C with pullup */
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1: uart1-0 {
-						atmel,pins =
-							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC16 periph C */
-							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC17 periph C with pullup */
-					};
-				};
-
-				nand {
-					pinctrl_nand_oe_we: nand-oe-we-0 {
-						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_cs: nand-cs-0 {
-						atmel,pins =
-							<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
-							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
-							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
-							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
-							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
-					};
-				};
-
-				mmc1 {
-					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA13 periph B */
-							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
-							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA11 periph B with pullup */
-					};
-
-					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA2 periph B with pullup */
-							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA3 periph B with pullup */
-							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA4 periph B with pullup */
-					};
-				};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
-							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
-							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
-							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
-							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
-							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
-					};
-				};
-
-				spi1 {
-					pinctrl_spi1: spi1-0 {
-						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
-							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
-							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
-					};
-				};
-
-				i2c0 {
-					pinctrl_i2c0: i2c0-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A I2C0 data */
-							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A I2C0 clock */
-					};
-				};
-
-				i2c1 {
-					pinctrl_i2c1: i2c1-0 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC0 periph C I2C1 data */
-							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC1 periph C I2C1 clock */
-					};
-				};
-
-				i2c2 {
-					pinctrl_i2c2: i2c2-0 {
-						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B I2C2 data */
-							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B I2C2 clock */
-					};
-				};
-
-				i2c_gpio0 {
-					pinctrl_i2c_gpio0: i2c_gpio0-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA30 gpio multidrive I2C0 data */
-							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA31 gpio multidrive I2C0 clock */
-					};
-				};
-
-				i2c_gpio1 {
-					pinctrl_i2c_gpio1: i2c_gpio1-0 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PC0 gpio multidrive I2C1 data */
-							 AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PC1 gpio multidrive I2C1 clock */
-					};
-				};
-
-				i2c_gpio2 {
-					pinctrl_i2c_gpio2: i2c_gpio2-0 {
-						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PB4 gpio multidrive I2C2 data */
-							 AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PB5 gpio multidrive I2C2 clock */
-					};
-				};
-
-				pwm0 {
-					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
-						atmel,pins =
-							<AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
-						atmel,pins =
-							<AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
-						atmel,pins =
-							<AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
-						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
-						atmel,pins =
-							<AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
-						atmel,pins =
-							<AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
-						atmel,pins =
-							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
-						atmel,pins =
-							<AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
-						atmel,pins =
-							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
-						atmel,pins =
-							<AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb1 {
-					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
-						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
-						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
-						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
-						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
-						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
-						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
-						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
-						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
-						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-				};
-
-				pioA: gpio@fffff400 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
-				};
-
-				pioB: gpio@fffff600 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					#gpio-lines = <19>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
-				};
-
-				pioC: gpio@fffff800 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
-				};
-
-				pioD: gpio@fffffa00 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffffa00 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					#gpio-lines = <22>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
-				};
-			};
-
-			ssc0: ssc@f0010000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xf0010000 0x4000>;
-				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
-				       <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			mmc0: mmc@f0008000 {
-				compatible = "atmel,hsmci";
-				reg = <0xf0008000 0x600>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
-				dma-names = "rxtx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
-				clock-names = "mci_clk";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			mmc1: mmc@f000c000 {
-				compatible = "atmel,hsmci";
-				reg = <0xf000c000 0x600>;
-				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
-				dma-names = "rxtx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
-				clock-names = "mci_clk";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
-				       <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
-				dma-names = "tx", "rx";
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart0: serial@f801c000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf801c000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart0>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
-				       <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
-				dma-names = "tx", "rx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@f8020000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8020000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
-				       <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
-				dma-names = "tx", "rx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@f8024000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8024000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart2>;
-				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
-				       <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
-				dma-names = "tx", "rx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			i2c0: i2c@f8010000 {
-				compatible = "atmel,at91sam9x5-i2c";
-				reg = <0xf8010000 0x100>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
-				       <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
-				dma-names = "tx", "rx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@f8014000 {
-				compatible = "atmel,at91sam9x5-i2c";
-				reg = <0xf8014000 0x100>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
-				       <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
-				dma-names = "tx", "rx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@f8018000 {
-				compatible = "atmel,at91sam9x5-i2c";
-				reg = <0xf8018000 0x100>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
-				       <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
-				dma-names = "tx", "rx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
-				status = "disabled";
-			};
-
-			uart0: serial@f8040000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8040000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			uart1: serial@f8044000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8044000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			adc0: adc@f804c000 {
-				compatible = "atmel,at91sam9x5-adc";
-				reg = <0xf804c000 0x100>;
-				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
-					 <&adc_op_clk>;
-				clock-names = "adc_clk", "adc_op_clk";
-				atmel,adc-use-external-triggers;
-				atmel,adc-channels-used = <0xffff>;
-				atmel,adc-vref = <3300>;
-				atmel,adc-startup-time = <40>;
-				atmel,adc-sample-hold-time = <11>;
-			};
-
-			spi0: spi@f0000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xf0000000 0x100>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
-				       <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			spi1: spi@f0004000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xf0004000 0x100>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
-				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
-				       <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			usb2: gadget@f803c000 {
-				compatible = "atmel,at91sam9g45-udc";
-				reg = <0x00500000 0x80000
-				       0xf803c000 0x400>;
-				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
-				clock-names = "hclk", "pclk";
-				status = "disabled";
-			};
-
-			watchdog: watchdog@fffffe40 {
-				compatible = "atmel,at91sam9260-wdt";
-				reg = <0xfffffe40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				atmel,watchdog-type = "hardware";
-				atmel,reset-type = "all";
-				atmel,dbg-halt;
-				status = "disabled";
-			};
-
-			rtc: rtc@fffffeb0 {
-				compatible = "atmel,at91sam9x5-rtc";
-				reg = <0xfffffeb0 0x40>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-			pwm0: pwm@f8034000 {
-				compatible = "atmel,at91sam9rl-pwm";
-				reg = <0xf8034000 0x300>;
-				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-		};
-
-		usb0: ohci@600000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00600000 0x100000>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-
-		usb1: ehci@700000 {
-			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
-			reg = <0x00700000 0x100000>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
-			clock-names = "usb_clk", "ehci_clk";
-			status = "disabled";
-		};
-
-		ebi: ebi@10000000 {
-			compatible = "atmel,at91sam9x5-ebi";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc>;
-			atmel,matrix = <&matrix>;
-			reg = <0x10000000 0x60000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000>;
-			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			status = "disabled";
-
-			nand_controller: nand-controller {
-				compatible = "atmel,at91sam9g45-nand-controller";
-				ecc-engine = <&pmecc>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio0>;
-		status = "disabled";
-	};
-
-	i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
-			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio1>;
-		status = "disabled";
-	};
-
-	i2c-gpio-2 {
-		compatible = "i2c-gpio";
-		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
-			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio2>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi
deleted file mode 100644
index 04ccb25d342c5..0000000000000
--- a/arch/arm/boot/dts/at91sam9x5_can.dtsi
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
- * Ethernet interface.
- *
- * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- */
-
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	ahb {
-		apb {
-			can0: can@f8000000 {
-				compatible = "atmel,at91sam9x5-can";
-				reg = <0xf8000000 0x300>;
-				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can0_rx_tx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
-				clock-names = "can_clk";
-				status = "disabled";
-			};
-
-			can1: can@f8004000 {
-				compatible = "atmel,at91sam9x5-can";
-				reg = <0xf8004000 0x300>;
-				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can1_rx_tx>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
-				clock-names = "can_clk";
-				status = "disabled";
-			};
-
-			pinctrl@fffff400 {
-				can0 {
-					pinctrl_can0_rx_tx: can0_rx_tx {
-						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0, conflicts with DRXD */
-							AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX0, conflicts with DTXD */
-					};
-				};
-
-				can1 {
-					pinctrl_can1_rx_tx: can1_rx_tx {
-						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1, conflicts with RXD1 */
-							AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX1, conflicts with TXD1 */
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
deleted file mode 100644
index 4ce98f05d7db4..0000000000000
--- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
- * Image Sensor Interface.
- *
- * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- */
-
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				isi {
-					pinctrl_isi_data_0_7: isi-0-data-0-7 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D0, conflicts with LCDDAT0 */
-							AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D1, conflicts with LCDDAT1 */
-							AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D2, conflicts with LCDDAT2 */
-							AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D3, conflicts with LCDDAT3 */
-							AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D4, conflicts with LCDDAT4 */
-							AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D5, conflicts with LCDDAT5 */
-							AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D6, conflicts with LCDDAT6 */
-							AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D7, conflicts with LCDDAT7 */
-							AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_PCK, conflicts with LCDDAT12 */
-							AT91_PIOC 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_HSYNC, conflicts with LCDDAT14 */
-							AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_VSYNC, conflicts with LCDDAT13 */
-					};
-
-					pinctrl_isi_data_8_9: isi-0-data-8-9 {
-						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D8, conflicts with LCDDAT8 */
-							AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_D9, conflicts with LCDDAT9 */
-					};
-
-					pinctrl_isi_data_10_11: isi-0-data-10-11 {
-						atmel,pins =
-							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D10, conflicts with LCDDAT10 */
-							AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_D11, conflicts with LCDDAT11 */
-					};
-				};
-			};
-
-			isi: isi@f8048000 {
-				compatible = "atmel,at91sam9g45-isi";
-				reg = <0xf8048000 0x4000>;
-				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_isi_data_0_7>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
-				clock-names = "isi_clk";
-				status = "disabled";
-				port {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
deleted file mode 100644
index f81c9d1691e03..0000000000000
--- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
- * LCD controller.
- *
- * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- */
-
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	ahb {
-		apb {
-			hlcdc: hlcdc@f8038000 {
-				compatible = "atmel,at91sam9x5-hlcdc";
-				reg = <0xf8038000 0x4000>;
-				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
-				clock-names = "periph_clk","sys_clk", "slow_clk";
-				status = "disabled";
-
-				hlcdc-display-controller {
-					compatible = "atmel,hlcdc-display-controller";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						reg = <0>;
-					};
-				};
-
-				hlcdc_pwm: hlcdc-pwm {
-					compatible = "atmel,hlcdc-pwm";
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_lcd_pwm>;
-					#pwm-cells = <3>;
-				};
-			};
-		};
-	};
-};
-
-&pinctrl {
-	lcd {
-		pinctrl_lcd_base: lcd-base-0 {
-			atmel,pins =
-				<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
-				 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
-				 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
-				 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
-				 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
-		};
-
-		pinctrl_lcd_pwm: lcd-pwm-0 {
-			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
-		};
-
-		pinctrl_lcd_rgb444: lcd-rgb-0 {
-			atmel,pins =
-				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
-				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
-				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
-				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
-				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
-				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
-				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
-				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
-				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
-				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
-				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
-				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
-		};
-
-		pinctrl_lcd_rgb565: lcd-rgb-1 {
-			atmel,pins =
-				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
-				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
-				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
-				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
-				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
-				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
-				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
-				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
-				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
-				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
-				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
-				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
-				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
-				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
-				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
-				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
-		};
-
-		pinctrl_lcd_rgb666: lcd-rgb-2 {
-			atmel,pins =
-				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
-				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
-				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
-				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
-				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
-				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
-				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
-				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
-				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
-				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
-				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
-				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
-				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
-				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
-				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
-				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
-				 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
-				 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
-		};
-
-		pinctrl_lcd_rgb888: lcd-rgb-3 {
-			atmel,pins =
-				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
-				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
-				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
-				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
-				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
-				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
-				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
-				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
-				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
-				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
-				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
-				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
-				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
-				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
-				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
-				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
-				 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
-				 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
-				 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
-				 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
-				 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
-				 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
-				 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
-				 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
deleted file mode 100644
index 222aa30f68603..0000000000000
--- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
- * Ethernet interface.
- *
- * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- */
-
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				macb0 {
-					pinctrl_macb0_rmii: macb0_rmii-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
-							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
-							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
-							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
-							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
-							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
-					};
-
-					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
-						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A */
-							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
-							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
-					};
-				};
-			};
-
-			macb0: ethernet@f802c000 {
-				compatible = "cdns,at91sam9260-macb", "cdns,macb";
-				reg = <0xf802c000 0x100>;
-				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_rmii>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
-				clock-names = "hclk", "pclk";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
deleted file mode 100644
index 26bf9b5de9ee4..0000000000000
--- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
- * Ethernet interfaces.
- *
- * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- */
-
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				macb1 {
-					pinctrl_macb1_rmii: macb1_rmii-0 {
-						atmel,pins =
-							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC16 periph B */
-							 AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC18 periph B */
-							 AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC19 periph B */
-							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
-							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
-							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
-							 AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC28 periph B */
-							 AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC29 periph B */
-							 AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC30 periph B */
-							 AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC31 periph B */
-					};
-				};
-			};
-
-			macb1: ethernet@f8030000 {
-				compatible = "cdns,at91sam9260-macb", "cdns,macb";
-				reg = <0xf8030000 0x100>;
-				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb1_rmii>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
-				clock-names = "hclk", "pclk";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
deleted file mode 100644
index a47c765e1b20a..0000000000000
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
- * 4 USART.
- *
- * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- */
-
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/mfd/at91-usart.h>
-
-/ {
-	aliases {
-		serial4 = &usart3;
-	};
-
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				usart3 {
-					pinctrl_usart3: usart3-0 {
-						atmel,pins =
-							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE
-							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart3_rts: usart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC24 periph B */
-					};
-
-					pinctrl_usart3_cts: usart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC25 periph B */
-					};
-
-					pinctrl_usart3_sck: usart3_sck-0 {
-						atmel,pins =
-							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC26 periph B */
-					};
-				};
-			};
-
-			usart3: serial@f8028000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8028000 0x200>;
-				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart3>;
-				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
-				       <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
-				dma-names = "tx", "rx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
deleted file mode 100644
index cdd37f67280bf..0000000000000
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-
-/ {
-	memory@20000000 {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			tcb0: timer@f8008000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			pinctrl@fffff400 {
-				1wire_cm {
-					pinctrl_1wire_cm: 1wire_cm-0 {
-						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
-					};
-				};
-			};
-
-			rtc@fffffeb0 {
-				status = "okay";
-			};
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_addr_nand
-				     &pinctrl_ebi_data_0_7>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_oe_we
-					     &pinctrl_nand_cs
-					     &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-ecc-strength = <2>;
-					nand-ecc-step-size = <512>;
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						uboot@40000 {
-							label = "u-boot";
-							reg = <0x40000 0xc0000>;
-						};
-
-						ubootenvred@100000 {
-							label = "U-Boot Env Redundant";
-							reg = <0x100000 0x40000>;
-						};
-
-						ubootenv@140000 {
-							label = "U-Boot Env";
-							reg = <0x140000 0x40000>;
-						};
-
-						dtb@180000 {
-							label = "device tree";
-							reg = <0x180000 0x80000>;
-						};
-
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
-						};
-
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pb18 {
-			label = "pb18";
-			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		pd21 {
-			label = "pd21";
-			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	1wire_cm {
-		compatible = "w1-gpio";
-		gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
-		linux,open-drain;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_1wire_cm>;
-		status = "okay";
-	};
-
-};
diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi
deleted file mode 100644
index a9278038af3bc..0000000000000
--- a/arch/arm/boot/dts/at91sam9x5dm.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
- *
- *  Copyright (C) 2014 Atmel,
- *                2014 Free Electrons
- *
- *  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
- */
-
-/ {
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 50000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		power-supply = <&bl_reg>;
-		status = "disabled";
-	};
-
-	bl_reg: backlight_regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "backlight-power-supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		status = "disabled";
-	};
-
-	panel: panel {
-		compatible = "foxlink,fl500wvr00-a0t";
-		backlight = <&backlight>;
-		power-supply = <&panel_reg>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&hlcdc_panel_output>;
-			};
-		};
-	};
-
-	panel_reg: panel_regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "panel-power-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		status = "disabled";
-	};
-};
-
-&adc0 {
-	atmel,adc-ts-wires = <4>;
-	atmel,adc-ts-pressure-threshold = <10000>;
-	status = "okay";
-};
-
-&i2c0 {
-	keyboard@1b {
-		compatible = "qt1070";
-		reg = <0x1b>;
-		interrupt-parent = <&pioA>;
-		interrupts = <7 0x0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_qt1070_irq>;
-		wakeup-source;
-	};
-};
-
-&hlcdc {
-	hlcdc-display-controller {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-
-		port@0 {
-			hlcdc_panel_output: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&panel_input>;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	board {
-		pinctrl_qt1070_irq: qt1070_irq {
-			atmel,pins =
-				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
deleted file mode 100644
index 5f4eaa618ab47..0000000000000
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ /dev/null
@@ -1,167 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-#include "at91sam9x5cm.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9X5-EK";
-	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
-		stdout-path = "serial0:115200n8";
-	};
-
-	sound {
-		compatible = "atmel,sam9x5-wm8731-audio";
-
-		atmel,model = "wm8731 @ AT91SAM9X5EK";
-
-		atmel,audio-routing =
-			"Headphone Jack", "RHPOUT",
-			"Headphone Jack", "LHPOUT",
-			"LLINEIN", "Line In Jack",
-			"RLINEIN", "Line In Jack";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8731>;
-	};
-};
-
-&adc0 {
-	atmel,adc-ts-wires = <4>;
-	atmel,adc-ts-pressure-threshold = <10000>;
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	wm8731: wm8731@1a {
-		compatible = "wm8731";
-		reg = <0x1a>;
-	};
-};
-
-&mmc0 {
-	pinctrl-0 = <
-		&pinctrl_board_mmc0
-		&pinctrl_mmc0_slot0_clk_cmd_dat0
-		&pinctrl_mmc0_slot0_dat1_3>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&mmc1 {
-	pinctrl-0 = <
-		&pinctrl_board_mmc1
-		&pinctrl_mmc1_slot0_clk_cmd_dat0
-		&pinctrl_mmc1_slot0_dat1_3>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&pinctrl {
-	camera_sensor {
-		pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
-			atmel,pins =
-				<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
-		};
-
-		pinctrl_sensor_power: sensor_power-0 {
-			atmel,pins =
-				<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_sensor_reset: sensor_reset-0 {
-			atmel,pins =
-				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-
-	mmc0 {
-		pinctrl_board_mmc0: mmc0-board {
-			atmel,pins =
-				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
-		};
-	};
-
-	mmc1 {
-		pinctrl_board_mmc1: mmc1-board {
-			atmel,pins =
-				<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
-		};
-	};
-
-	usb2 {
-		pinctrl_board_usb2: usb2-board {
-			atmel,pins =
-				<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
-		};
-	};
-};
-
-&spi0 {
-	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-	status = "disabled"; /* conflicts with mmc1 */
-
-	flash@0 {
-		compatible = "atmel,at25df321a";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-	};
-};
-
-&ssc0 {
-	status = "okay";
-};
-
-&usart0 {
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "okay";
-};
-
-&usb0 {
-	num-ports = <3>;
-	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
-			   &pioD 19 GPIO_ACTIVE_LOW
-			   &pioD 20 GPIO_ACTIVE_LOW
-			  >;
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_board_usb2>;
-	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi
deleted file mode 100644
index f571f77779c36..0000000000000
--- a/arch/arm/boot/dts/at91sam9xe.dtsi
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC
- *
- *  Copyright (C) 2015 Atmel,
- *                2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com>
- */
-
-#include "at91sam9260.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9XE family SoC";
-	compatible = "atmel,at91sam9xe", "atmel,at91sam9260";
-
-	sram0: sram@2ff000 {
-		status = "disabled";
-	};
-
-	sram1: sram@300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x4000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x00300000 0x4000>;
-	};
-};
diff --git a/arch/arm/boot/dts/axis/Makefile b/arch/arm/boot/dts/axis/Makefile
new file mode 100644
index 0000000000000..2cab41451281a
--- /dev/null
+++ b/arch/arm/boot/dts/axis/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
diff --git a/arch/arm/boot/dts/axis/artpec6-devboard.dts b/arch/arm/boot/dts/axis/artpec6-devboard.dts
new file mode 100644
index 0000000000000..042a9cc920c67
--- /dev/null
+++ b/arch/arm/boot/dts/axis/artpec6-devboard.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Axis ARTPEC-6 development board.
+
+/dts-v1/;
+#include "artpec6.dtsi"
+
+/ {
+	model = "ARTPEC-6 development board";
+	compatible = "axis,artpec6-dev-board", "axis,artpec6";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+
+	mdio {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			device_type = "ethernet-phy";
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/axis/artpec6.dtsi b/arch/arm/boot/dts/axis/artpec6.dtsi
new file mode 100644
index 0000000000000..037157e6c5ee3
--- /dev/null
+++ b/arch/arm/boot/dts/axis/artpec6.dtsi
@@ -0,0 +1,388 @@
+/*
+ * Device Tree Source for the Axis ARTPEC-6 SoC
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/dma/nbpfaxi.h>
+#include <dt-bindings/clock/axis,artpec6-clkctrl.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "axis,artpec6";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&pl310>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&pl310>;
+		};
+	};
+
+	syscon: syscon@f8000000 {
+		compatible = "axis,artpec6-syscon", "syscon";
+		reg = <0xf8000000 0x48>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		psci_version = <0x84000000>;
+		cpu_on = <0x84000003>;
+		system_reset = <0x84000009>;
+	};
+
+	scu@faf00000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0xfaf00000 0x58>;
+	};
+
+	/* Main external clock driving CPU and peripherals */
+	ext_clk: ext_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	eth_phy_ref_clk: eth_phy_ref_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+	};
+
+	clkctrl: clkctrl@f8000000 {
+		#clock-cells = <1>;
+		compatible = "axis,artpec6-clkctrl";
+		reg = <0xf8000000 0x48>;
+		clocks = <&ext_clk>;
+		clock-names = "sys_refclk";
+	};
+
+	gtimer@faf00200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xfaf00200 0x20>;
+		interrupts = <GIC_PPI 11 0xf01>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
+	};
+
+	timer@faf00600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0xfaf00600 0x20>;
+		interrupts = <GIC_PPI 13 0xf04>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
+		status = "disabled";
+	};
+
+	intc: interrupt-controller@faf01000 {
+		interrupt-controller;
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >;
+	};
+
+	pl310: cache-controller@faf10000 {
+		compatible = "arm,pl310-cache";
+		cache-unified;
+		cache-level = <2>;
+		reg = <0xfaf10000 0x1000>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <1 1 1>;
+		arm,filter-ranges = <0x0 0x80000000>;
+		arm,double-linefill = <1>;
+		arm,double-linefill-incr = <0>;
+		arm,double-linefill-wrap = <0>;
+		prefetch-data = <1>;
+		prefetch-instr = <1>;
+		arm,prefetch-offset = <0>;
+		arm,prefetch-drop = <1>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/*
+	 * Both pci nodes cannot be enabled at the same time,
+	 * leave the unwanted node as disabled.
+	 */
+	pcie: pcie@f8050000 {
+		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x2000>;
+		reg-names = "dbi", "phy", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+			  /* downstream I/O */
+		ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
+			  /* non-prefetchable memory */
+			  0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
+		num-lanes = <2>;
+		bus-range = <0x00 0xff>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		axis,syscon-pcie = <&syscon>;
+		status = "disabled";
+	};
+
+	pcie_ep: pcie_ep@f8050000 {
+		compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8051000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x20000000>;
+		reg-names = "dbi", "dbi2", "phy", "addr_space";
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		num-lanes = <2>;
+		axis,syscon-pcie = <&syscon>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl@f801d000 {
+		compatible = "axis,artpec6-pinctrl";
+		reg = <0xf801d000 0x400>;
+
+		pinctrl_uart0: uart0grp {
+			function = "uart0";
+			groups = "uart0grp2";
+			bias-pull-up;
+		};
+		pinctrl_uart1: uart1grp {
+			function = "uart1";
+			groups = "uart1grp0";
+			bias-pull-up;
+		};
+		pinctrl_uart2: uart2grp {
+			function = "uart2";
+			groups = "uart2grp1";
+			bias-pull-up;
+		};
+		pinctrl_uart3: uart3grp {
+			function = "uart3";
+			groups = "uart3grp0";
+			bias-pull-up;
+		};
+	};
+
+	amba@0 {
+		compatible = "simple-bus";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+		dma-ranges;
+
+		crypto@f4264000 {
+			compatible = "axis,artpec6-crypto";
+			reg = <0xf4264000 0x4000>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma0: dma@f8019000 {
+			compatible = "renesas,nbpfaxi64dmac8b16";
+			reg = <0xf8019000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch12",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			dma-requests = <8>;
+		};
+		dma1: dma@f8019400 {
+			compatible = "renesas,nbpfaxi64dmac8b16";
+			reg = <0xf8019400 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch12",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			dma-requests = <8>;
+		};
+
+		ethernet: ethernet@f8010000 {
+			clock-names = "stmmaceth", "ptp_ref";
+			clocks = <&clkctrl ARTPEC6_CLK_ETH_ACLK>,
+				<&clkctrl ARTPEC6_CLK_PTP_REF>;
+			compatible = "snps,dwmac-4.10a", "snps,dwmac";
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+			reg = <0xf8010000 0x4000>;
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup>;
+			snps,mtl-tx-config = <&mtl_tx_setup>;
+
+			snps,txpbl = <8>;
+			snps,rxpbl = <2>;
+			snps,aal;
+			snps,tso;
+
+			status = "disabled";
+
+			stmmac_axi_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <1>;
+				snps,rd_osr_lmt = <15>;
+				/* If FB is disabled, the AXI master chooses
+				 * a burst length of any value less than the
+				 * maximum enabled burst length
+				 * (all lesser burst length enables are redundant).
+				 */
+				snps,blen = <0 0 0 0 16 0 0>;
+			};
+
+			mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <1>;
+				queue0 {};
+			};
+
+			mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <2>;
+				queue0 {};
+				queue1 {};
+			};
+		};
+
+		uart0: serial@f8036000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8036000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			dmas = <&dma0 4 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma0 5 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		uart1: serial@f8037000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8037000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			dmas = <&dma0 6 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma0 7 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		uart2: serial@f8038000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8038000 0x1000>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			dmas = <&dma1 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma1 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		uart3: serial@f8039000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8039000 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			dmas = <&dma1 2 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma1 3 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/axm5516-amarillo.dts
deleted file mode 100644
index 2e2ad3c7ee776..0000000000000
--- a/arch/arm/boot/dts/axm5516-amarillo.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/boot/dts/axm5516-amarillo.dts
- *
- * Copyright (C) 2013 LSI
- */
-
-/dts-v1/;
-
-/memreserve/ 0x00000000 0x00400000;
-
-#include "axm55xx.dtsi"
-#include "axm5516-cpus.dtsi"
-
-/ {
-	model = "Amarillo AXM5516";
-	compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0x02 0x00000000>;
-	};
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&serial3 {
-	status = "okay";
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi
deleted file mode 100644
index f13ef80b66373..0000000000000
--- a/arch/arm/boot/dts/axm5516-cpus.dtsi
+++ /dev/null
@@ -1,200 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/boot/dts/axm5516-cpus.dtsi
- *
- * Copyright (C) 2013 LSI
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-				core1 {
-					cpu = <&CPU1>;
-				};
-				core2 {
-					cpu = <&CPU2>;
-				};
-				core3 {
-					cpu = <&CPU3>;
-				};
-			};
-			cluster1 {
-				core0 {
-					cpu = <&CPU4>;
-				};
-				core1 {
-					cpu = <&CPU5>;
-				};
-				core2 {
-					cpu = <&CPU6>;
-				};
-				core3 {
-					cpu = <&CPU7>;
-				};
-			};
-			cluster2 {
-				core0 {
-					cpu = <&CPU8>;
-				};
-				core1 {
-					cpu = <&CPU9>;
-				};
-				core2 {
-					cpu = <&CPU10>;
-				};
-				core3 {
-					cpu = <&CPU11>;
-				};
-			};
-			cluster3 {
-				core0 {
-					cpu = <&CPU12>;
-				};
-				core1 {
-					cpu = <&CPU13>;
-				};
-				core2 {
-					cpu = <&CPU14>;
-				};
-				core3 {
-					cpu = <&CPU15>;
-				};
-			};
-		};
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x00>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x01>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x02>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x03>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x100>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x101>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x102>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x103>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU8: cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x200>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU9: cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x201>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU10: cpu@202 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x202>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU11: cpu@203 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x203>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU12: cpu@300 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x300>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU13: cpu@301 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x301>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU14: cpu@302 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x302>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU15: cpu@303 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x303>;
-			clock-frequency = <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi
deleted file mode 100644
index 5277890cfad2e..0000000000000
--- a/arch/arm/boot/dts/axm55xx.dtsi
+++ /dev/null
@@ -1,200 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/boot/dts/axm55xx.dtsi
- *
- * Copyright (C) 2013 LSI
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/lsi,axm5516-clks.h>
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0	  = &serial0;
-		serial1   = &serial1;
-		serial2	  = &serial2;
-		serial3	  = &serial3;
-		timer	  = &timer0;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		clk_ref0: clk_ref0 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		clk_ref1: clk_ref1 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		clk_ref2: clk_ref2 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		clks: clock-controller@2010020000 {
-			compatible = "lsi,axm5516-clks";
-			#clock-cells = <1>;
-			reg = <0x20 0x10020000 0 0x20000>;
-		};
-	};
-
-	gic: interrupt-controller@2001001000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x20 0x01001000 0 0x1000>,
-		      <0x20 0x01002000 0 0x2000>,
-		      <0x20 0x01004000 0 0x2000>,
-		      <0x20 0x01006000 0 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-				IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts =
-			<GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		device_type = "soc";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		interrupt-parent = <&gic>;
-		ranges;
-
-		syscon: syscon@2010030000 {
-			compatible = "lsi,axxia-syscon", "syscon";
-			reg = <0x20 0x10030000 0 0x2000>;
-		};
-
-		reset: reset@2010031000 {
-			compatible = "lsi,axm55xx-reset";
-			syscon = <&syscon>;
-		};
-
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			serial0: serial@2010080000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x20 0x10080000 0 0x1000>;
-				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			serial1: serial@2010081000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x20 0x10081000 0 0x1000>;
-				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			serial2: serial@2010082000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x20 0x10082000 0 0x1000>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			serial3: serial@2010083000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x20 0x10083000 0 0x1000>;
-				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			timer0: timer@2010091000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x20 0x10091000 0 0x1000>;
-				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "okay";
-			};
-
-			gpio0: gpio@2010092000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0x20 0x10092000 0x00 0x1000>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			gpio1: gpio@2010093000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0x20 0x10093000 0x00 0x1000>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-		};
-	};
-};
-
-/*
-  Local Variables:
-  mode: C
-  End:
-*/
diff --git a/arch/arm/boot/dts/axp152.dtsi b/arch/arm/boot/dts/axp152.dtsi
deleted file mode 100644
index f90ad6c64a073..0000000000000
--- a/arch/arm/boot/dts/axp152.dtsi
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright 2015 Chen-Yu Tsai
- *
- * Chen-Yu Tsai <wens@csie.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-&axp152 {
-	compatible = "x-powers,axp152";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-};
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
deleted file mode 100644
index ca240cd6f6c35..0000000000000
--- a/arch/arm/boot/dts/axp209.dtsi
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright 2015 Chen-Yu Tsai
- *
- * Chen-Yu Tsai <wens@csie.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * AXP202/209 Integrated Power Management Chip
- * http://www.x-powers.com/product/AXP20X.php
- * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
- */
-
-&axp209 {
-	compatible = "x-powers,axp209";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	ac_power_supply: ac-power {
-		compatible = "x-powers,axp202-ac-power-supply";
-		status = "disabled";
-	};
-
-	axp_adc: adc {
-		compatible = "x-powers,axp209-adc";
-		#io-channel-cells = <1>;
-	};
-
-	axp_gpio: gpio {
-		compatible = "x-powers,axp209-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	battery_power_supply: battery-power {
-		compatible = "x-powers,axp209-battery-power-supply";
-		status = "disabled";
-	};
-
-	regulators {
-		/* Default work frequency for buck regulators */
-		x-powers,dcdc-freq = <1500>;
-
-		reg_dcdc2: dcdc2 {
-			regulator-name = "dcdc2";
-		};
-
-		reg_dcdc3: dcdc3 {
-			regulator-name = "dcdc3";
-		};
-
-		reg_ldo1: ldo1 {
-			/* LDO1 is a fixed output regulator */
-			regulator-always-on;
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-name = "ldo1";
-		};
-
-		reg_ldo2: ldo2 {
-			regulator-name = "ldo2";
-		};
-
-		reg_ldo3: ldo3 {
-			regulator-name = "ldo3";
-		};
-
-		reg_ldo4: ldo4 {
-			regulator-name = "ldo4";
-		};
-
-		reg_ldo5: ldo5 {
-			regulator-name = "ldo5";
-			status = "disabled";
-		};
-	};
-
-	usb_power_supply: usb-power {
-		compatible = "x-powers,axp202-usb-power-supply";
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/axp223.dtsi b/arch/arm/boot/dts/axp223.dtsi
deleted file mode 100644
index b91b6c1278c7a..0000000000000
--- a/arch/arm/boot/dts/axp223.dtsi
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright 2016 Free Electrons
- *
- * Quentin Schulz <quentin.schulz@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * AXP223 Integrated Power Management Chip
- * http://www.x-powers.com/product/AXP22X.php
- * http://dl.linux-sunxi.org/AXP/AXP223-en.pdf
- *
- * The AXP223 shares most of its logic with the AXP221 but it has some
- * differences, for the VBUS driver for example.
- */
-
-#include "axp22x.dtsi"
-
-&usb_power_supply {
-	compatible = "x-powers,axp223-usb-power-supply";
-};
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi
deleted file mode 100644
index f79650afd0a76..0000000000000
--- a/arch/arm/boot/dts/axp22x.dtsi
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Copyright 2015 Chen-Yu Tsai
- *
- * Chen-Yu Tsai <wens@csie.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * AXP221/221s/223 Integrated Power Management Chip
- * http://www.x-powers.com/product/AXP22X.php
- * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
- */
-
-&axp22x {
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	ac_power_supply: ac-power {
-		compatible = "x-powers,axp221-ac-power-supply";
-		status = "disabled";
-	};
-
-	axp_adc: adc {
-		compatible = "x-powers,axp221-adc";
-		#io-channel-cells = <1>;
-	};
-
-	battery_power_supply: battery-power {
-		compatible = "x-powers,axp221-battery-power-supply";
-		status = "disabled";
-	};
-
-	axp_gpio: gpio {
-		compatible = "x-powers,axp221-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	regulators {
-		/* Default work frequency for buck regulators */
-		x-powers,dcdc-freq = <3000>;
-
-		reg_dcdc1: dcdc1 {
-			regulator-name = "dcdc1";
-		};
-
-		reg_dcdc2: dcdc2 {
-			regulator-name = "dcdc2";
-		};
-
-		reg_dcdc3: dcdc3 {
-			regulator-name = "dcdc3";
-		};
-
-		reg_dcdc4: dcdc4 {
-			regulator-name = "dcdc4";
-		};
-
-		reg_dcdc5: dcdc5 {
-			regulator-name = "dcdc5";
-		};
-
-		reg_dc1sw: dc1sw {
-			regulator-name = "dc1sw";
-		};
-
-		reg_dc5ldo: dc5ldo {
-			regulator-name = "dc5ldo";
-		};
-
-		reg_aldo1: aldo1 {
-			regulator-name = "aldo1";
-		};
-
-		reg_aldo2: aldo2 {
-			regulator-name = "aldo2";
-		};
-
-		reg_aldo3: aldo3 {
-			regulator-name = "aldo3";
-		};
-
-		reg_dldo1: dldo1 {
-			regulator-name = "dldo1";
-		};
-
-		reg_dldo2: dldo2 {
-			regulator-name = "dldo2";
-		};
-
-		reg_dldo3: dldo3 {
-			regulator-name = "dldo3";
-		};
-
-		reg_dldo4: dldo4 {
-			regulator-name = "dldo4";
-		};
-
-		reg_eldo1: eldo1 {
-			regulator-name = "eldo1";
-		};
-
-		reg_eldo2: eldo2 {
-			regulator-name = "eldo2";
-		};
-
-		reg_eldo3: eldo3 {
-			regulator-name = "eldo3";
-		};
-
-		reg_ldo_io0: ldo_io0 {
-			regulator-name = "ldo_io0";
-			status = "disabled";
-		};
-
-		reg_ldo_io1: ldo_io1 {
-			regulator-name = "ldo_io1";
-			status = "disabled";
-		};
-
-		reg_rtc_ldo: rtc_ldo {
-			/* RTC_LDO is a fixed, always-on regulator */
-			regulator-always-on;
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-name = "rtc_ldo";
-		};
-
-		reg_drivevbus: drivevbus {
-			regulator-name = "drivevbus";
-			status = "disabled";
-		};
-	};
-
-	usb_power_supply: usb-power {
-		compatible = "x-powers,axp221-usb-power-supply";
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/axp809.dtsi
deleted file mode 100644
index d134d4c00bd86..0000000000000
--- a/arch/arm/boot/dts/axp809.dtsi
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright 2015 Chen-Yu Tsai
- *
- * Chen-Yu Tsai <wens@csie.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * AXP809 Integrated Power Management Chip
- */
-
-&axp809 {
-	compatible = "x-powers,axp809";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	axp_gpio: gpio {
-		compatible = "x-powers,axp809-gpio",
-			     "x-powers,axp221-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
deleted file mode 100644
index ebaf1c3ce8dbb..0000000000000
--- a/arch/arm/boot/dts/axp81x.dtsi
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Copyright 2017 Chen-Yu Tsai
- *
- * Chen-Yu Tsai <wens@csie.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/* AXP813/818 Integrated Power Management Chip */
-
-&axp81x {
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	ac_power_supply: ac-power {
-		compatible = "x-powers,axp813-ac-power-supply";
-		status = "disabled";
-	};
-
-	axp_adc: adc {
-		compatible = "x-powers,axp813-adc";
-		#io-channel-cells = <1>;
-	};
-
-	axp_gpio: gpio {
-		compatible = "x-powers,axp813-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	battery_power_supply: battery-power {
-		compatible = "x-powers,axp813-battery-power-supply";
-		status = "disabled";
-	};
-
-	regulators {
-		/* Default work frequency for buck regulators */
-		x-powers,dcdc-freq = <3000>;
-
-		reg_dcdc1: dcdc1 {
-		};
-
-		reg_dcdc2: dcdc2 {
-		};
-
-		reg_dcdc3: dcdc3 {
-		};
-
-		reg_dcdc4: dcdc4 {
-		};
-
-		reg_dcdc5: dcdc5 {
-		};
-
-		reg_dcdc6: dcdc6 {
-		};
-
-		reg_dcdc7: dcdc7 {
-		};
-
-		reg_aldo1: aldo1 {
-		};
-
-		reg_aldo2: aldo2 {
-		};
-
-		reg_aldo3: aldo3 {
-		};
-
-		reg_dldo1: dldo1 {
-		};
-
-		reg_dldo2: dldo2 {
-		};
-
-		reg_dldo3: dldo3 {
-		};
-
-		reg_dldo4: dldo4 {
-		};
-
-		reg_eldo1: eldo1 {
-		};
-
-		reg_eldo2: eldo2 {
-		};
-
-		reg_eldo3: eldo3 {
-		};
-
-		reg_fldo1: fldo1 {
-		};
-
-		reg_fldo2: fldo2 {
-		};
-
-		reg_fldo3: fldo3 {
-		};
-
-		reg_ldo_io0: ldo-io0 {
-			/* Disable by default to avoid conflicts with GPIO */
-			status = "disabled";
-		};
-
-		reg_ldo_io1: ldo-io1 {
-			/* Disable by default to avoid conflicts with GPIO */
-			status = "disabled";
-		};
-
-		reg_rtc_ldo: rtc-ldo {
-			/* RTC_LDO is a fixed, always-on regulator */
-			regulator-always-on;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		reg_sw: sw {
-		};
-
-		reg_drivevbus: drivevbus {
-			status = "disabled";
-		};
-	};
-
-	usb_power_supply: usb-power {
-		compatible = "x-powers,axp813-usb-power-supply";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
deleted file mode 100644
index 52f91a12a99aa..0000000000000
--- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-clocks {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	osc: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	/* Cygnus ARM PLL */
-	armpll: armpll@19000000 {
-		#clock-cells = <0>;
-		compatible = "brcm,cygnus-armpll";
-		clocks = <&osc>;
-		reg = <0x19000000 0x1000>;
-	};
-
-	/* peripheral clock for system timer */
-	periph_clk: arm_periph_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&armpll>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	/* APB bus clock */
-	apb_clk: apb_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&armpll>;
-		clock-div = <4>;
-		clock-mult = <1>;
-	};
-
-	genpll: genpll@301d000 {
-		#clock-cells = <1>;
-		compatible = "brcm,cygnus-genpll";
-		reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
-		clocks = <&osc>;
-		clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
-				     "enet_sw", "audio_125", "can";
-	};
-
-	/* always 1/2 of the axi21 clock */
-	axi41_clk: axi41_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&genpll 1>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	/* always 1/4 of the axi21 clock */
-	axi81_clk: axi81_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&genpll 1>;
-		clock-div = <4>;
-		clock-mult = <1>;
-	};
-
-	lcpll0: lcpll0@301d02c {
-		#clock-cells = <1>;
-		compatible = "brcm,cygnus-lcpll0";
-		reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>;
-		clocks = <&osc>;
-		clock-output-names = "lcpll0", "pcie_phy", "ddr_phy", "sdio",
-				     "usb_phy", "smart_card", "ch5";
-	};
-
-	mipipll: mipipll@180a9800 {
-		#clock-cells = <1>;
-		compatible = "brcm,cygnus-mipipll";
-		reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>;
-		clocks = <&osc>;
-		clock-output-names = "mipipll", "ch0_unused", "ch1_lcd",
-				     "ch2_v3d", "ch3_unused", "ch4_unused",
-				     "ch5_unused";
-	};
-
-	asiu_clks: asiu_clks@301d048 {
-		#clock-cells = <1>;
-		compatible = "brcm,cygnus-asiu-clk";
-		reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
-
-		clocks = <&osc>;
-		clock-output-names = "keypad", "adc/touch", "pwm";
-	};
-
-	audiopll: audiopll@180aeb00 {
-		#clock-cells = <1>;
-		compatible = "brcm,cygnus-audiopll";
-		reg = <0x180aeb00 0x68>;
-		clocks = <&osc>;
-		clock-output-names = "audiopll", "ch0_audio",
-					"ch1_audio", "ch2_audio";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
deleted file mode 100644
index f9f79ed825181..0000000000000
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ /dev/null
@@ -1,623 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/bcm-cygnus.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "brcm,cygnus";
-	model = "Broadcom Cygnus SoC";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		ethernet0 = &eth0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-	};
-
-	/include/ "bcm-cygnus-clock.dtsi"
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	core@19000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x19000000 0x1000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		timer@20200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&periph_clk>;
-		};
-
-		gic: interrupt-controller@21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x21000 0x1000>,
-			      <0x20100 0x100>;
-		};
-
-		L2: cache-controller@22000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x22000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-	};
-
-	axi {
-		compatible = "simple-bus";
-		ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		otp: otp@301c800 {
-			compatible = "brcm,ocotp";
-			reg = <0x0301c800 0x2c>;
-			brcm,ocotp-size = <2048>;
-			status = "disabled";
-		};
-
-		pcie_phy: pcie_phy@301d0a0 {
-			compatible = "brcm,cygnus-pcie-phy";
-			reg = <0x0301d0a0 0x14>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pcie0_phy: pcie-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-
-			pcie1_phy: pcie-phy@1 {
-				reg = <1>;
-				#phy-cells = <0>;
-			};
-		};
-
-		pinctrl: pinctrl@301d0c8 {
-			compatible = "brcm,cygnus-pinmux";
-			reg = <0x0301d0c8 0x30>,
-			      <0x0301d24c 0x2c>;
-
-			spi_0: spi_0 {
-				function = "spi0";
-				groups = "spi0_grp";
-			};
-
-			spi_1: spi_1 {
-				function = "spi1";
-				groups = "spi1_grp";
-			};
-
-			spi_2: spi_2 {
-				function = "spi2";
-				groups = "spi2_grp";
-			};
-		};
-
-		mailbox: mailbox@3024024 {
-			compatible = "brcm,iproc-mailbox";
-			reg = <0x03024024 0x40>;
-			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			#mbox-cells = <1>;
-		};
-
-		gpio_crmu: gpio@3024800 {
-			compatible = "brcm,cygnus-crmu-gpio";
-			reg = <0x03024800 0x50>,
-			      <0x03024008 0x18>;
-			ngpios = <6>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-			interrupt-parent = <&mailbox>;
-			interrupts = <0>;
-		};
-
-		mdio: mdio@18002000 {
-			compatible = "brcm,iproc-mdio";
-			reg = <0x18002000 0x8>;
-			#size-cells = <0>;
-			#address-cells = <1>;
-			status = "disabled";
-
-			gphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			gphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		switch: switch@18007000 {
-			compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
-			reg = <0x18007000 0x1000>;
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					phy-handle = <&gphy0>;
-					phy-mode = "rgmii";
-				};
-
-				port@1 {
-					reg = <1>;
-					phy-handle = <&gphy1>;
-					phy-mode = "rgmii";
-				};
-
-				port@8 {
-					reg = <8>;
-					label = "cpu";
-					ethernet = <&eth0>;
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-
-		i2c0: i2c@18008000 {
-			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
-			reg = <0x18008000 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		wdt0: wdt@18009000 {
-			compatible = "arm,sp805" , "arm,primecell";
-			reg = <0x18009000 0x1000>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&axi81_clk>, <&axi81_clk>;
-			clock-names = "wdog_clk", "apb_pclk";
-		};
-
-		gpio_ccm: gpio@1800a000 {
-			compatible = "brcm,cygnus-ccm-gpio";
-			reg = <0x1800a000 0x50>,
-			      <0x0301d164 0x20>;
-			ngpios = <24>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-		};
-
-		i2c1: i2c@1800b000 {
-			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
-			reg = <0x1800b000 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		pcie0: pcie@18012000 {
-			compatible = "brcm,iproc-pcie";
-			reg = <0x18012000 0x1000>;
-
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-
-			linux,pci-domain = <0>;
-
-			bus-range = <0x00 0xff>;
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000>,
-				 <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
-
-			phys = <&pcie0_phy>;
-			phy-names = "pcie-phy";
-
-			status = "disabled";
-
-			msi-parent = <&msi0>;
-			msi0: msi {
-				compatible = "brcm,iproc-msi";
-				msi-controller;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pcie1: pcie@18013000 {
-			compatible = "brcm,iproc-pcie";
-			reg = <0x18013000 0x1000>;
-
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-
-			linux,pci-domain = <1>;
-
-			bus-range = <0x00 0xff>;
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000>,
-				 <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
-
-			phys = <&pcie1_phy>;
-			phy-names = "pcie-phy";
-
-			status = "disabled";
-
-			msi-parent = <&msi1>;
-			msi1: msi {
-				compatible = "brcm,iproc-msi";
-				msi-controller;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		dma0: dma@18018000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x18018000 0x1000>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb_clk>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		uart0: serial@18020000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x18020000 0x100>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&axi81_clk>;
-			clock-frequency = <100000000>;
-			status = "disabled";
-		};
-
-		uart1: serial@18021000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x18021000 0x100>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&axi81_clk>;
-			clock-frequency = <100000000>;
-			status = "disabled";
-		};
-
-		uart2: serial@18022000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x18022000 0x100>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&axi81_clk>;
-			clock-frequency = <100000000>;
-			status = "disabled";
-		};
-
-		uart3: serial@18023000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x18023000 0x100>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&axi81_clk>;
-			clock-frequency = <100000000>;
-			status = "disabled";
-		};
-
-		spi0: spi@18028000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x18028000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-0 = <&spi_0>;
-			clocks = <&axi81_clk>, <&axi81_clk>;
-			clock-names = "sspclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		spi1: spi@18029000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x18029000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-0 = <&spi_1>;
-			clocks = <&axi81_clk>, <&axi81_clk>;
-			clock-names = "sspclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		spi2: spi@1802a000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x1802a000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-0 = <&spi_2>;
-			clocks = <&axi81_clk>, <&axi81_clk>;
-			clock-names = "sspclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		rng: rng@18032000 {
-			compatible = "brcm,iproc-rng200";
-			reg = <0x18032000 0x28>;
-		};
-
-		sdhci0: sdhci@18041000 {
-			compatible = "brcm,sdhci-iproc-cygnus";
-			reg = <0x18041000 0x100>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
-			bus-width = <4>;
-			sdhci,auto-cmd12;
-			status = "disabled";
-		};
-
-		eth0: ethernet@18042000 {
-			compatible = "brcm,amac";
-			reg = <0x18042000 0x1000>,
-			      <0x18110000 0x1000>;
-			reg-names = "amac_base", "idm_base";
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		sdhci1: sdhci@18043000 {
-			compatible = "brcm,sdhci-iproc-cygnus";
-			reg = <0x18043000 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
-			bus-width = <4>;
-			sdhci,auto-cmd12;
-			status = "disabled";
-		};
-
-		nand_controller: nand-controller@18046000 {
-			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
-			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
-			      <0x18046f00 0x20>;
-			reg-names = "nand", "iproc-idm", "iproc-ext";
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			brcm,nand-has-wp;
-		};
-
-		ehci0: usb@18048000 {
-			compatible = "generic-ehci";
-			reg = <0x18048000 0x100>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		ohci0: usb@18048800 {
-			compatible = "generic-ohci";
-			reg = <0x18048800 0x100>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		clcd: clcd@180a0000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0x180a0000 0x1000>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "combined";
-			clocks = <&axi41_clk>, <&apb_clk>;
-			clock-names = "clcdclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		v3d: v3d@180a2000 {
-			compatible = "brcm,cygnus-v3d";
-			reg = <0x180a2000 0x1000>;
-			clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
-			clock-names = "v3d_clk";
-			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		vc4: gpu {
-			compatible = "brcm,cygnus-vc4";
-		};
-
-		gpio_asiu: gpio@180a5000 {
-			compatible = "brcm,cygnus-asiu-gpio";
-			reg = <0x180a5000 0x668>;
-			ngpios = <146>;
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			interrupt-controller;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&pinctrl 0 42 1>,
-					<&pinctrl 1 44 3>,
-					<&pinctrl 4 48 1>,
-					<&pinctrl 5 50 3>,
-					<&pinctrl 8 126 1>,
-					<&pinctrl 9 155 1>,
-					<&pinctrl 10 152 1>,
-					<&pinctrl 11 154 1>,
-					<&pinctrl 12 153 1>,
-					<&pinctrl 13 127 3>,
-					<&pinctrl 16 140 1>,
-					<&pinctrl 17 145 7>,
-					<&pinctrl 24 130 10>,
-					<&pinctrl 34 141 4>,
-					<&pinctrl 38 54 1>,
-					<&pinctrl 39 56 3>,
-					<&pinctrl 42 60 3>,
-					<&pinctrl 45 64 3>,
-					<&pinctrl 48 68 2>,
-					<&pinctrl 50 84 6>,
-					<&pinctrl 56 94 6>,
-					<&pinctrl 62 72 1>,
-					<&pinctrl 63 70 1>,
-					<&pinctrl 64 80 1>,
-					<&pinctrl 65 74 3>,
-					<&pinctrl 68 78 1>,
-					<&pinctrl 69 82 1>,
-					<&pinctrl 70 156 17>,
-					<&pinctrl 87 104 12>,
-					<&pinctrl 99 102 2>,
-					<&pinctrl 101 90 4>,
-					<&pinctrl 105 116 6>,
-					<&pinctrl 111 100 2>,
-					<&pinctrl 113 122 4>,
-					<&pinctrl 123 11 1>,
-					<&pinctrl 124 38 4>,
-					<&pinctrl 128 43 1>,
-					<&pinctrl 129 47 1>,
-					<&pinctrl 130 49 1>,
-					<&pinctrl 131 53 1>,
-					<&pinctrl 132 55 1>,
-					<&pinctrl 133 59 1>,
-					<&pinctrl 134 63 1>,
-					<&pinctrl 135 67 1>,
-					<&pinctrl 136 71 1>,
-					<&pinctrl 137 73 1>,
-					<&pinctrl 138 77 1>,
-					<&pinctrl 139 79 1>,
-					<&pinctrl 140 81 1>,
-					<&pinctrl 141 83 1>,
-					<&pinctrl 142 10 1>;
-		};
-
-		ts_adc_syscon: ts_adc_syscon@180a6000 {
-			compatible = "brcm,iproc-ts-adc-syscon", "syscon";
-			reg = <0x180a6000 0xc30>;
-		};
-
-		touchscreen: touchscreen@180a6000 {
-			compatible = "brcm,iproc-touchscreen";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ts_syscon = <&ts_adc_syscon>;
-			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
-			clock-names = "tsc_clk";
-			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		adc: adc@180a6000 {
-			compatible = "brcm,iproc-static-adc";
-			#io-channel-cells = <1>;
-			adc-syscon = <&ts_adc_syscon>;
-			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
-			clock-names = "tsc_clk";
-			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		pwm: pwm@180aa500 {
-			compatible = "brcm,kona-pwm";
-			reg = <0x180aa500 0xc4>;
-			#pwm-cells = <3>;
-			clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
-			status = "disabled";
-		};
-
-		keypad: keypad@180ac000 {
-			compatible = "brcm,bcm-keypad";
-			reg = <0x180ac000 0x14c>;
-			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>;
-			clock-names = "peri_clk";
-			clock-frequency = <31250>;
-			pull-up-enabled;
-			col-debounce-filter-period = <0>;
-			status-debounce-filter-period = <0>;
-			row-output-enabled;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
deleted file mode 100644
index 33e6ba63a1eee..0000000000000
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2017 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "brcm,hr2";
-	model = "Broadcom Hurricane 2 SoC";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>;
-	};
-
-	mpcore@19000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x19000000 0x00023000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		a9pll: arm_clk@0 {
-			#clock-cells = <0>;
-			compatible = "brcm,hr2-armpll";
-			clocks = <&osc>;
-			reg = <0x0 0x1000>;
-		};
-
-		timer@20200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&periph_clk>;
-		};
-
-		twd-timer@20600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x20600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		twd-watchdog@20620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x20620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		gic: interrupt-controller@21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x21000 0x1000>,
-			      <0x20100 0x100>;
-		};
-
-		L2: cache-controller@22000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x22000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-		};
-
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&a9pll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-	};
-
-	axi@18000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x0011c40c>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uart0: serial@300 {
-			compatible = "ns16550a";
-			reg = <0x0300 0x100>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			status = "disabled";
-		};
-
-		uart1: serial@400 {
-			compatible = "ns16550a";
-			reg = <0x0400 0x100>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			status = "disabled";
-		};
-
-		dma@20000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x20000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			status = "disabled";
-		};
-
-		amac0: ethernet@22000 {
-			compatible = "brcm,nsp-amac";
-			reg = <0x22000 0x1000>,
-			      <0x110000 0x1000>;
-			reg-names = "amac_base", "idm_base";
-			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		nand_controller: nand-controller@26000 {
-			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
-			reg = <0x26000 0x600>,
-			      <0x11b408 0x600>,
-			      <0x026f00 0x20>;
-			reg-names = "nand", "iproc-idm", "iproc-ext";
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			brcm,nand-has-wp;
-		};
-
-		gpiob: gpio@30000 {
-			compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio";
-			reg = <0x30000 0x50>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			ngpios = <4>;
-			interrupt-controller;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pwm: pwm@31000 {
-			compatible = "brcm,iproc-pwm";
-			reg = <0x31000 0x28>;
-			clocks = <&osc>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		rng: rng@33000 {
-			compatible = "brcm,bcm-nsp-rng";
-			reg = <0x33000 0x14>;
-		};
-
-		qspi: spi@27200 {
-			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
-			reg = <0x027200 0x184>,
-			      <0x027000 0x124>,
-			      <0x11c408 0x004>,
-			      <0x0273a0 0x01c>;
-			reg-names = "mspi", "bspi", "intr_regs",
-				    "intr_status_reg";
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "spi_lr_fullness_reached",
-					  "spi_lr_session_aborted",
-					  "spi_lr_impatient",
-					  "spi_lr_session_done",
-					  "spi_lr_overhead",
-					  "mspi_done",
-					  "mspi_halted";
-			num-cs = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* partitions defined in board DTS */
-		};
-
-		ccbtimer0: timer@34000 {
-			compatible = "arm,sp804";
-			reg = <0x34000 0x1000>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		ccbtimer1: timer@35000 {
-			compatible = "arm,sp804";
-			reg = <0x35000 0x1000>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		i2c0: i2c@38000 {
-			compatible = "brcm,iproc-i2c";
-			reg = <0x38000 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000>;
-		};
-
-		watchdog: watchdog@39000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x39000 0x1000>;
-			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		i2c1: i2c@3b000 {
-			compatible = "brcm,iproc-i2c";
-			reg = <0x3b000 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000>;
-		};
-	};
-
-	pflash: nor@20000000 {
-		compatible = "cfi-flash", "jedec-flash";
-		reg = <0x20000000 0x04000000>;
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* partitions defined in board DTS */
-	};
-
-	pcie0: pcie@18012000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18012000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-
-		linux,pci-domain = <0>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-
-		/* Note: The HW does not support I/O resources.  So,
-		 * only the memory resource range is being specified.
-		 */
-		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
-
-		status = "disabled";
-
-		msi-parent = <&msi0>;
-		msi0: msi {
-			compatible = "brcm,iproc-msi";
-			msi-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
-			brcm,pcie-msi-inten;
-		};
-	};
-
-	pcie1: pcie@18013000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18013000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-
-		linux,pci-domain = <1>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-
-		/* Note: The HW does not support I/O resources.  So,
-		 * only the memory resource range is being specified.
-		 */
-		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
-
-		status = "disabled";
-
-		msi-parent = <&msi1>;
-		msi1: msi {
-			compatible = "brcm,iproc-msi";
-			msi-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
-			brcm,pcie-msi-inten;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/bcm-nsp-ax.dtsi
deleted file mode 100644
index f2e941dbab103..0000000000000
--- a/arch/arm/boot/dts/bcm-nsp-ax.dtsi
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom Northstar Plus Ax stepping-specific bindings.
- * Notable differences from B0+ are the secondary-boot-reg and
- * lack of DMA coherency.
- */
-
-&cpu1 {
-	secondary-boot-reg = <0xffff042c>;
-};
-
-&dma {
-	/delete-property/ dma-coherent;
-};
-
-&sdio {
-	/delete-property/ dma-coherent;
-};
-
-&amac0 {
-	/delete-property/ dma-coherent;
-};
-
-&amac1 {
-	/delete-property/ dma-coherent;
-};
-
-&amac2 {
-	/delete-property/ dma-coherent;
-};
-
-&ehci0 {
-	/delete-property/ dma-coherent;
-};
-
-&mailbox {
-	/delete-property/ dma-coherent;
-};
-
-&xhci {
-	/delete-property/ dma-coherent;
-};
-
-&ehci0 {
-	/delete-property/ dma-coherent;
-};
-
-&ohci0 {
-	/delete-property/ dma-coherent;
-};
-
-&i2c0 {
-	/delete-property/ dma-coherent;
-};
-
-&sata {
-	/delete-property/ dma-coherent;
-};
-
-&pcie0 {
-	/delete-property/ dma-coherent;
-};
-
-&pcie1 {
-	/delete-property/ dma-coherent;
-};
-
-&pcie2 {
-	/delete-property/ dma-coherent;
-};
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
deleted file mode 100644
index 5b1dc58d40ba2..0000000000000
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ /dev/null
@@ -1,695 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/bcm-nsp.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "brcm,nsp";
-	model = "Broadcom Northstar Plus SoC";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		ethernet0 = &amac0;
-		ethernet1 = &amac1;
-		ethernet2 = &amac2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			enable-method = "brcm,bcm-nsp-smp";
-			secondary-boot-reg = <0xffff0fec>;
-			reg = <0x1>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	mpcore-bus@19000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x19000000 0x00023000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		a9pll: arm_clk@0 {
-			#clock-cells = <0>;
-			compatible = "brcm,nsp-armpll";
-			clocks = <&osc>;
-			reg = <0x00000 0x1000>;
-		};
-
-		timer@20200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&periph_clk>;
-		};
-
-		twd-timer@20600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x20600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		twd-watchdog@20620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x20620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&periph_clk>;
-		};
-
-		gic: interrupt-controller@21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x21000 0x1000>,
-			      <0x20100 0x100>;
-		};
-
-		L2: cache-controller@22000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x22000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-		};
-
-		iprocmed: iprocmed {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		iprocslow: iprocslow {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&a9pll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-	};
-
-	axi: axi@18000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x0011c40c>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		gpioa: gpio@20 {
-			compatible = "brcm,nsp-gpio-a";
-			reg = <0x0020 0x70>,
-			      <0x3f1c4 0x1c>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			ngpios = <32>;
-			interrupt-controller;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&pinctrl 0 0 32>;
-		};
-
-		uart0: serial@300 {
-			compatible = "ns16550a";
-			reg = <0x0300 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			status = "disabled";
-		};
-
-		uart1: serial@400 {
-			compatible = "ns16550a";
-			reg = <0x0400 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			status = "disabled";
-		};
-
-		dma: dma@20000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x20000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		sdio: mmc@21000 {
-			compatible = "brcm,sdhci-iproc-cygnus";
-			reg = <0x21000 0x100>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			sdhci,auto-cmd12;
-			clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		amac0: ethernet@22000 {
-			compatible = "brcm,nsp-amac";
-			reg = <0x022000 0x1000>,
-			      <0x110000 0x1000>;
-			reg-names = "amac_base", "idm_base";
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		amac1: ethernet@23000 {
-			compatible = "brcm,nsp-amac";
-			reg = <0x023000 0x1000>,
-			      <0x111000 0x1000>;
-			reg-names = "amac_base", "idm_base";
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		amac2: ethernet@24000 {
-			compatible = "brcm,nsp-amac";
-			reg = <0x024000 0x1000>,
-			      <0x112000 0x1000>;
-			reg-names = "amac_base", "idm_base";
-			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		mailbox: mailbox@25c00 {
-			compatible = "brcm,iproc-fa2-mbox";
-			reg = <0x25c00 0x400>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <1>;
-			brcm,rx-status-len = <32>;
-			brcm,use-bcm-hdr;
-			dma-coherent;
-		};
-
-		nand_controller: nand-controller@26000 {
-			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
-			reg = <0x026000 0x600>,
-			      <0x11b408 0x600>,
-			      <0x026f00 0x20>;
-			reg-names = "nand", "iproc-idm", "iproc-ext";
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			brcm,nand-has-wp;
-		};
-
-		qspi: spi@27200 {
-			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
-			reg = <0x027200 0x184>,
-			      <0x027000 0x124>,
-			      <0x11c408 0x004>,
-			      <0x0273a0 0x01c>;
-			reg-names = "mspi", "bspi", "intr_regs",
-				    "intr_status_reg";
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "spi_lr_fullness_reached",
-					  "spi_lr_session_aborted",
-					  "spi_lr_impatient",
-					  "spi_lr_session_done",
-					  "spi_lr_overhead",
-					  "mspi_done",
-					  "mspi_halted";
-			clocks = <&iprocmed>;
-			clock-names = "iprocmed";
-			num-cs = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		xhci: usb@29000 {
-			compatible = "generic-xhci";
-			reg = <0x29000 0x1000>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb3_phy>;
-			phy-names = "usb3-phy";
-			dma-coherent;
-			status = "disabled";
-		};
-
-		ehci0: usb@2a000 {
-			compatible = "generic-ehci";
-			reg = <0x2a000 0x100>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		ohci0: usb@2b000 {
-			compatible = "generic-ohci";
-			reg = <0x2b000 0x100>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		crypto@2f000 {
-			compatible = "brcm,spum-nsp-crypto";
-			reg = <0x2f000 0x900>;
-			mboxes = <&mailbox 0>;
-		};
-
-		gpiob: gpio@30000 {
-			compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
-			reg = <0x30000 0x50>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			ngpios = <4>;
-			interrupt-controller;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pwm: pwm@31000 {
-			compatible = "brcm,iproc-pwm";
-			reg = <0x31000 0x28>;
-			clocks = <&osc>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		mdio: mdio@32000 {
-			compatible = "brcm,iproc-mdio";
-			reg = <0x32000 0x8>;
-			#size-cells = <0>;
-			#address-cells = <1>;
-		};
-
-		mdio-mux@32000 {
-			compatible = "mdio-mux-mmioreg", "mdio-mux";
-			reg = <0x32000 0x4>;
-			mux-mask = <0x200>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			mdio-parent-bus = <&mdio>;
-
-			mdio_int: mdio@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb3_phy: usb3-phy@10 {
-					compatible = "brcm,ns-bx-usb3-phy";
-					reg = <0x10>;
-					usb3-dmp-syscon = <&usb3_dmp>;
-					#phy-cells = <0>;
-					status = "disabled";
-				};
-			};
-
-			mdio_ext: mdio@200 {
-				reg = <0x200>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		rng: rng@33000 {
-			compatible = "brcm,bcm-nsp-rng";
-			reg = <0x33000 0x14>;
-		};
-
-		ccbtimer0: timer@34000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x34000 0x1000>;
-			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			clock-names = "apb_pclk";
-		};
-
-		ccbtimer1: timer@35000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x35000 0x1000>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			clock-names = "apb_pclk";
-		};
-
-		srab: ethernet-switch@36000 {
-			compatible = "brcm,nsp-srab";
-			reg = <0x36000 0x1000>,
-			      <0x3f308 0x8>,
-			      <0x3f410 0xc>;
-			reg-names = "srab", "mux_config", "sgmii_config";
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "link_state_p0",
-					  "link_state_p1",
-					  "link_state_p2",
-					  "link_state_p3",
-					  "link_state_p4",
-					  "link_state_p5",
-					  "link_state_p7",
-					  "link_state_p8",
-					  "phy",
-					  "ts",
-					  "imp_sleep_timer_p5",
-					  "imp_sleep_timer_p7",
-					  "imp_sleep_timer_p8";
-			status = "disabled";
-
-			/* ports are defined in board DTS */
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		i2c0: i2c@38000 {
-			compatible = "brcm,iproc-i2c";
-			reg = <0x38000 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		watchdog@39000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x39000 0x1000>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>, <&iprocslow>;
-			clock-names = "wdog_clk", "apb_pclk";
-		};
-
-		lcpll0: lcpll0@3f100 {
-			#clock-cells = <1>;
-			compatible = "brcm,nsp-lcpll0";
-			reg = <0x3f100 0x14>;
-			clocks = <&osc>;
-			clock-output-names = "lcpll0", "pcie_phy", "sdio",
-					     "ddr_phy";
-		};
-
-		genpll: genpll@3f140 {
-			#clock-cells = <1>;
-			compatible = "brcm,nsp-genpll";
-			reg = <0x3f140 0x24>;
-			clocks = <&osc>;
-			clock-output-names = "genpll", "phy", "ethernetclk",
-					     "usbclk", "iprocfast", "sata1",
-					     "sata2";
-		};
-
-		pinctrl: pinctrl@3f1c0 {
-			compatible = "brcm,nsp-pinmux";
-			reg = <0x3f1c0 0x04>,
-			      <0x30028 0x04>,
-			      <0x3f408 0x04>;
-		};
-
-		thermal: thermal@3f2c0 {
-			compatible = "brcm,ns-thermal";
-			reg = <0x3f2c0 0x10>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		sata_phy: sata_phy@40100 {
-			compatible = "brcm,iproc-nsp-sata-phy";
-			reg = <0x40100 0x340>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			sata_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-
-			sata_phy1: sata-phy@1 {
-				reg = <1>;
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		sata: sata@41000 {
-			compatible = "brcm,bcm-nsp-ahci";
-			reg-names = "ahci", "top-ctrl";
-			reg = <0x41000 0x1000>, <0x40020 0x1c>;
-			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			dma-coherent;
-			status = "disabled";
-
-			sata0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata_phy0>;
-				phy-names = "sata-phy";
-			};
-
-			sata1: sata-port@1 {
-				reg = <1>;
-				phys = <&sata_phy1>;
-				phy-names = "sata-phy";
-			};
-		};
-
-		usb3_dmp: syscon@104000 {
-			reg = <0x104000 0x1000>;
-		};
-	};
-
-	pcie0: pcie@18012000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18012000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-
-		linux,pci-domain = <0>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-
-		/* Note: The HW does not support I/O resources.  So,
-		 * only the memory resource range is being specified.
-		 */
-		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
-
-		dma-coherent;
-		status = "disabled";
-
-		msi-parent = <&msi0>;
-		msi0: msi {
-			compatible = "brcm,iproc-msi";
-			msi-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			brcm,pcie-msi-inten;
-		};
-	};
-
-	pcie1: pcie@18013000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18013000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-
-		linux,pci-domain = <1>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-
-		/* Note: The HW does not support I/O resources.  So,
-		 * only the memory resource range is being specified.
-		 */
-		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
-
-		dma-coherent;
-		status = "disabled";
-
-		msi-parent = <&msi1>;
-		msi1: msi {
-			compatible = "brcm,iproc-msi";
-			msi-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-			brcm,pcie-msi-inten;
-		};
-	};
-
-	pcie2: pcie@18014000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18014000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-
-		linux,pci-domain = <2>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-
-		/* Note: The HW does not support I/O resources.  So,
-		 * only the memory resource range is being specified.
-		 */
-		ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
-
-		dma-coherent;
-		status = "disabled";
-
-		msi-parent = <&msi2>;
-		msi2: msi {
-			compatible = "brcm,iproc-msi";
-			msi-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-			brcm,pcie-msi-inten;
-		};
-	};
-
-	thermal-zones {
-		cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <1000>;
-			coefficients = <(-556) 418000>;
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature     = <125000>;
-					hysteresis      = <0>;
-					type            = "critical";
-				};
-			};
-
-			cooling-maps {
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
deleted file mode 100644
index ba75784d66a97..0000000000000
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ /dev/null
@@ -1,414 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2012-2013 Broadcom Corporation
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "dt-bindings/clock/bcm281xx.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "BCM11351 SoC";
-	compatible = "brcm,bcm11351";
-	interrupt-parent = <&gic>;
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			enable-method = "brcm,bcm11351-cpu-method";
-			secondary-boot-reg = <0x3500417c>;
-			reg = <1>;
-		};
-	};
-
-	gic: interrupt-controller@3ff00100 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x3ff01000 0x1000>,
-		      <0x3ff00100 0x100>;
-	};
-
-	smc@3404c000 {
-		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
-		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
-	};
-
-	serial@3e000000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e000000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	serial@3e001000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e001000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	serial@3e002000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e002000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	serial@3e003000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e003000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
-		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	L2: l2-cache@3ff20000 {
-		compatible = "brcm,bcm11351-a2-pl310-cache";
-		reg = <0x3ff20000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	watchdog@35002f40 {
-		compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
-		reg = <0x35002f40 0x6c>;
-	};
-
-	timer@35006000 {
-		compatible = "brcm,kona-timer";
-		reg = <0x35006000 0x1000>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
-	};
-
-	gpio: gpio@35003000 {
-		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
-		reg = <0x35003000 0x800>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-	};
-
-	sdio1: sdio@3f180000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f180000 0x10000>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO1>;
-		status = "disabled";
-	};
-
-	sdio2: sdio@3f190000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f190000 0x10000>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO2>;
-		status = "disabled";
-	};
-
-	sdio3: sdio@3f1a0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1a0000 0x10000>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
-		status = "disabled";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1b0000 0x10000>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO4>;
-		status = "disabled";
-	};
-
-	pinctrl@35004800 {
-		compatible = "brcm,bcm11351-pinctrl";
-		reg = <0x35004800 0x430>;
-	};
-
-	i2c@3e016000 {
-		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
-		reg = <0x3e016000 0x80>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC1>;
-		status = "disabled";
-	};
-
-	i2c@3e017000 {
-		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
-		reg = <0x3e017000 0x80>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC2>;
-		status = "disabled";
-	};
-
-	i2c@3e018000 {
-		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
-		reg = <0x3e018000 0x80>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC3>;
-		status = "disabled";
-	};
-
-	i2c@3500d000 {
-		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
-		reg = <0x3500d000 0x80>;
-		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&aon_ccu BCM281XX_AON_CCU_PMU_BSC>;
-		status = "disabled";
-	};
-
-	pwm: pwm@3e01a000 {
-		compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
-		reg = <0x3e01a000 0xcc>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		root_ccu: root_ccu@35001000 {
-			compatible = "brcm,bcm11351-root-ccu";
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		hub_ccu: hub_ccu@34000000 {
-			compatible = "brcm,bcm11351-hub-ccu";
-			reg = <0x34000000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "tmon_1m";
-		};
-
-		aon_ccu: aon_ccu@35002000 {
-			compatible = "brcm,bcm11351-aon-ccu";
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer",
-					     "pmu_bsc",
-					     "pmu_bsc_var";
-		};
-
-		master_ccu: master_ccu@3f001000 {
-			compatible = "brcm,bcm11351-master-ccu";
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "usb_ic",
-					     "hsic2_48m",
-					     "hsic2_12m";
-		};
-
-		slave_ccu: slave_ccu@3e011000 {
-			compatible = "brcm,bcm11351-slave-ccu";
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "uartb4",
-					     "ssp0",
-					     "ssp2",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "pwm";
-		};
-
-		ref_1m_clk: ref_1m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <1000000>;
-		};
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_cx40_clk: ref_cx40 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <40000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-			#clock-cells = <0>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		ref_208m_clk: ref_208m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <208000000>;
-		};
-
-		var_208m_clk: var_208m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <208000000>;
-		};
-
-		ref_312m_clk: ref_312m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <312000000>;
-		};
-
-		var_312m_clk: var_312m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <312000000>;
-		};
-	};
-
-	usbotg: usb@3f120000 {
-		compatible = "snps,dwc2";
-		reg = <0x3f120000 0x10000>;
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usb_otg_ahb_clk>;
-		clock-names = "otg";
-		phys = <&usbphy>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		compatible = "brcm,kona-usb2-phy";
-		reg = <0x3f130000 0x28>;
-		#phy-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
deleted file mode 100644
index cd03fa0c2aae4..0000000000000
--- a/arch/arm/boot/dts/bcm21664-garnet.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2014 Broadcom Corporation
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm21664.dtsi"
-
-/ {
-	model = "BCM21664 Garnet board";
-	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	serial@3e000000 {
-		status = "okay";
-	};
-
-	sdio1: sdio@3f180000 {
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
deleted file mode 100644
index ed4de031e48ee..0000000000000
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ /dev/null
@@ -1,347 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2014 Broadcom Corporation
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "dt-bindings/clock/bcm21664.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "BCM21664 SoC";
-	compatible = "brcm,bcm21664";
-	interrupt-parent = <&gic>;
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			enable-method = "brcm,bcm11351-cpu-method";
-			secondary-boot-reg = <0x35004178>;
-			reg = <1>;
-		};
-	};
-
-	gic: interrupt-controller@3ff00100 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x3ff01000 0x1000>,
-		      <0x3ff00100 0x100>;
-	};
-
-	smc@3404e000 {
-		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
-		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
-	};
-
-	serial@3e000000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e000000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	serial@3e001000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e001000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	serial@3e002000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e002000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	L2: cache-controller@3ff20000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x3ff20000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	brcm,resetmgr@35001f00 {
-		compatible = "brcm,bcm21664-resetmgr";
-		reg = <0x35001f00 0x24>;
-	};
-
-	timer@35006000 {
-		compatible = "brcm,kona-timer";
-		reg = <0x35006000 0x1c>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
-	};
-
-	gpio: gpio@35003000 {
-		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
-		reg = <0x35003000 0x524>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-	};
-
-	sdio1: sdio@3f180000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f180000 0x801c>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
-		status = "disabled";
-	};
-
-	sdio2: sdio@3f190000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f190000 0x801c>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
-		status = "disabled";
-	};
-
-	sdio3: sdio@3f1a0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1a0000 0x801c>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
-		status = "disabled";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1b0000 0x801c>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
-		status = "disabled";
-	};
-
-	i2c@3e016000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e016000 0x70>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
-		status = "disabled";
-	};
-
-	i2c@3e017000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e017000 0x70>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
-		status = "disabled";
-	};
-
-	i2c@3e018000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e018000 0x70>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
-		status = "disabled";
-	};
-
-	i2c@3e01c000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e01c000 0x70>;
-		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed clocks are defined before CCUs whose
-		 * clocks may depend on them.
-		 */
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		root_ccu: root_ccu@35001000 {
-			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		aon_ccu: aon_ccu@35002000 {
-			compatible = BCM21664_DT_AON_CCU_COMPAT;
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer";
-		};
-
-		master_ccu: master_ccu@3f001000 {
-			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "sdio1_sleep",
-					     "sdio2_sleep",
-					     "sdio3_sleep",
-					     "sdio4_sleep";
-		};
-
-		slave_ccu: slave_ccu@3e011000 {
-			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "bsc4";
-		};
-	};
-
-	usbotg: usb@3f120000 {
-		compatible = "snps,dwc2";
-		reg = <0x3f120000 0x10000>;
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usb_otg_ahb_clk>;
-		clock-names = "otg";
-		phys = <&usbphy>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		compatible = "brcm,kona-usb2-phy";
-		reg = <0x3f130000 0x28>;
-		#phy-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/bcm23550-sparrow.dts
deleted file mode 100644
index ace77709f468b..0000000000000
--- a/arch/arm/boot/dts/bcm23550-sparrow.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm23550.dtsi"
-
-/ {
-	model = "BCM23550 Sparrow board";
-	compatible = "brcm,bcm23550-sparrow", "brcm,bcm23550";
-
-	chosen {
-		stdout-path = "/slaves@3e000000/serial@0:115200n8";
-		bootargs = "console=ttyS0,115200n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-};
-
-&uartb {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&sdio1 {
-	max-frequency = <48000000>;
-	status = "okay";
-};
-
-&sdio2 {
-	non-removable;
-	max-frequency = <48000000>;
-	status = "okay";
-};
-
-&sdio4 {
-	max-frequency = <48000000>;
-	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
deleted file mode 100644
index a36c9b1d23c8e..0000000000000
--- a/arch/arm/boot/dts/bcm23550.dtsi
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/* BCM23550 and BCM21664 have almost identical clocks */
-#include "dt-bindings/clock/bcm21664.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "BCM23550 SoC";
-	compatible = "brcm,bcm23550";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <1>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <2>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <3>;
-			clock-frequency = <1000000000>;
-		};
-	};
-
-	/* Hub bus */
-	hub@34000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x34000000 0x102f83ac>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		smc@4e000 {
-			compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
-			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
-		};
-
-		resetmgr: reset-controller@1001f00 {
-			compatible = "brcm,bcm21664-resetmgr";
-			reg = <0x01001f00 0x24>;
-		};
-
-		gpio: gpio@1003000 {
-			compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
-			reg = <0x01003000 0x524>;
-			interrupts =
-			       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-		};
-
-		timer@1006000 {
-			compatible = "brcm,kona-timer";
-			reg = <0x01006000 0x1c>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
-		};
-	};
-
-	/* Slaves bus */
-	slaves@3e000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x3e000000 0x0001c070>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uartb: serial@0 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00000000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		uartb2: serial@1000 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00001000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		uartb3: serial@2000 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00002000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		bsc1: i2c@16000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00016000 0x70>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
-			status = "disabled";
-		};
-
-		bsc2: i2c@17000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00017000 0x70>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
-			status = "disabled";
-		};
-
-		bsc3: i2c@18000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00018000 0x70>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
-			status = "disabled";
-		};
-
-		bsc4: i2c@1c000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x0001c000 0x70>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
-			status = "disabled";
-		};
-	};
-
-	/* Apps bus */
-	apps@3e300000 {
-		compatible = "simple-bus";
-		ranges = <0 0x3e300000 0x01b77000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		usbotg: usb@e20000 {
-			compatible = "snps,dwc2";
-			reg = <0x00e20000 0x10000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&usb_otg_ahb_clk>;
-			clock-names = "otg";
-			phys = <&usbphy>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		usbphy: usb-phy@e30000 {
-			compatible = "brcm,kona-usb2-phy";
-			reg = <0x00e30000 0x28>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		sdio1: sdio@e80000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00e80000 0x801c>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
-			status = "disabled";
-		};
-
-		sdio2: sdio@e90000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00e90000 0x801c>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
-			status = "disabled";
-		};
-
-		sdio3: sdio@ea0000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00ea0000 0x801c>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
-			status = "disabled";
-		};
-
-		sdio4: sdio@eb0000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00eb0000 0x801c>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
-			status = "disabled";
-		};
-
-		cdc: cdc@1b0e000 {
-			compatible = "brcm,bcm23550-cdc";
-			reg = <0x01b0e000 0x78>;
-		};
-
-		gic: interrupt-controller@1b21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x01b21000 0x1000>,
-			      <0x01b22000 0x1000>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed clocks are defined before CCUs whose
-		 * clocks may depend on them.
-		 */
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		root_ccu: root_ccu@35001000 {
-			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		aon_ccu: aon_ccu@35002000 {
-			compatible = BCM21664_DT_AON_CCU_COMPAT;
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer";
-		};
-
-		slave_ccu: slave_ccu@3e011000 {
-			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "bsc4";
-		};
-
-		master_ccu: master_ccu@3f001000 {
-			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "sdio1_sleep",
-					     "sdio2_sleep",
-					     "sdio3_sleep",
-					     "sdio4_sleep";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
deleted file mode 100644
index d5f8823230db9..0000000000000
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ /dev/null
@@ -1,243 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2711.dtsi"
-#include "bcm2711-rpi.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-usb-peripheral.dtsi"
-#include "bcm283x-rpi-wifi-bt.dtsi"
-
-/ {
-	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
-	model = "Raspberry Pi 4 Model B";
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-
-	sd_io_1v8_reg: regulator-sd-io-1v8 {
-		compatible = "regulator-gpio";
-		regulator-name = "vdd-sd-io";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-settling-time-us = <5000>;
-		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1>,
-			 <3300000 0x0>;
-		status = "okay";
-	};
-
-	sd_vcc_reg: regulator-sd-vcc {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc-sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		enable-active-high;
-		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&bt {
-	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-};
-
-&ddc0 {
-	status = "okay";
-};
-
-&ddc1 {
-	status = "okay";
-};
-
-&expgpio {
-	gpio-line-names = "BT_ON",		/*  0 */
-			  "WL_ON",
-			  "PWR_LED_OFF",
-			  "GLOBAL_RESET",
-			  "VDD_SD_IO_SEL",
-			  "CAM_GPIO",		/*  5 */
-			  "SD_PWR_ON",
-			  "";
-};
-
-&gpio {
-	/*
-	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
-	 * the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",		/*  0 */
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",		/*  5 */
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",		/* 10 */
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD1",
-			  "RXD1",		/* 15 */
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",		/* 20 */
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",		/* 25 */
-			  "GPIO26",
-			  "GPIO27",
-			  "RGMII_MDIO",
-			  "RGMIO_MDC",
-			  /* Used by BT module */
-			  "CTS0",		/* 30 */
-			  "RTS0",
-			  "TXD0",
-			  "RXD0",
-			  /* Used by Wifi */
-			  "SD1_CLK",
-			  "SD1_CMD",		/* 35 */
-			  "SD1_DATA0",
-			  "SD1_DATA1",
-			  "SD1_DATA2",
-			  "SD1_DATA3",
-			  /* Shared with SPI flash */
-			  "PWM0_MISO",		/* 40 */
-			  "PWM1_MOSI",
-			  "STATUS_LED_G_CLK",
-			  "SPIFLASH_CE_N",
-			  "SDA0",
-			  "SCL0",		/* 45 */
-			  "RGMII_RXCLK",
-			  "RGMII_RXCTL",
-			  "RGMII_RXD0",
-			  "RGMII_RXD1",
-			  "RGMII_RXD2",		/* 50 */
-			  "RGMII_RXD3",
-			  "RGMII_TXCLK",
-			  "RGMII_TXCTL",
-			  "RGMII_TXD0",
-			  "RGMII_TXD1",		/* 55 */
-			  "RGMII_TXD2",
-			  "RGMII_TXD3";
-};
-
-&hdmi0 {
-	status = "okay";
-};
-
-&hdmi1 {
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-};
-
-&leds {
-	led_pwr: led-pwr {
-		label = "PWR";
-		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-		default-state = "keep";
-		linux,default-trigger = "default-on";
-	};
-};
-
-&pixelvalve0 {
-	status = "okay";
-};
-
-&pixelvalve1 {
-	status = "okay";
-};
-
-&pixelvalve2 {
-	status = "okay";
-};
-
-&pixelvalve4 {
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
-	status = "okay";
-};
-
-/* EMMC2 is used to drive the SD card */
-&emmc2 {
-	vqmmc-supply = <&sd_io_1v8_reg>;
-	vmmc-supply = <&sd_vcc_reg>;
-	broken-cd;
-	status = "okay";
-};
-
-&genet {
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii-rxid";
-	status = "okay";
-};
-
-&genet_mdio {
-	phy1: ethernet-phy@1 {
-		/* No PHY interrupt */
-		reg = <0x1>;
-	};
-};
-
-&pcie0 {
-	pci@0,0 {
-		device_type = "pci";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		reg = <0 0 0 0 0>;
-
-		usb@0,0 {
-			reg = <0 0 0 0 0>;
-			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
-		};
-	};
-};
-
-/* uart0 communicates with the BT module */
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
-	uart-has-rtscts;
-};
-
-/* uart1 is mapped to the pin header */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_gpio14>;
-	status = "okay";
-};
-
-&vc4 {
-	status = "okay";
-};
-
-&vec {
-	status = "disabled";
-};
-
-&wifi_pwrseq {
-	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-400.dts b/arch/arm/boot/dts/bcm2711-rpi-400.dts
deleted file mode 100644
index 1ab8184302db4..0000000000000
--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2711-rpi-4-b.dts"
-
-/ {
-	compatible = "raspberrypi,400", "brcm,bcm2711";
-	model = "Raspberry Pi 400";
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&expgpio {
-	gpio-line-names = "BT_ON",
-			  "WL_ON",
-			  "PWR_LED_OFF",
-			  "GLOBAL_RESET",
-			  "VDD_SD_IO_SEL",
-			  "GLOBAL_SHUTDOWN",
-			  "SD_PWR_ON",
-			  "SHUTDOWN_REQUEST";
-};
-
-&genet_mdio {
-	clock-frequency = <1950000>;
-};
-
-&led_pwr {
-	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-};
-
-&leds {
-	/delete-node/ led_act;
-};
-
-&pm {
-	/delete-property/ system-power-controller;
-};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts
deleted file mode 100644
index d7ba02f586d30..0000000000000
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2711-rpi-cm4.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	model = "Raspberry Pi Compute Module 4 IO Board";
-};
-
-&ddc0 {
-	status = "okay";
-};
-
-&ddc1 {
-	status = "okay";
-};
-
-&gpio {
-	/*
-	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
-	 * the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD1",
-			  "RXD1",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "RGMII_MDIO",
-			  "RGMIO_MDC",
-			  /* Used by BT module */
-			  "CTS0",
-			  "RTS0",
-			  "TXD0",
-			  "RXD0",
-			  /* Used by Wifi */
-			  "SD1_CLK",
-			  "SD1_CMD",
-			  "SD1_DATA0",
-			  "SD1_DATA1",
-			  "SD1_DATA2",
-			  "SD1_DATA3",
-			  /* Shared with SPI flash */
-			  "PWM0_MISO",
-			  "PWM1_MOSI",
-			  "STATUS_LED_G_CLK",
-			  "SPIFLASH_CE_N",
-			  "SDA0",
-			  "SCL0",
-			  "RGMII_RXCLK",
-			  "RGMII_RXCTL",
-			  "RGMII_RXD0",
-			  "RGMII_RXD1",
-			  "RGMII_RXD2",
-			  "RGMII_RXD3",
-			  "RGMII_TXCLK",
-			  "RGMII_TXCTL",
-			  "RGMII_TXD0",
-			  "RGMII_TXD1",
-			  "RGMII_TXD2",
-			  "RGMII_TXD3";
-};
-
-&hdmi0 {
-	status = "okay";
-};
-
-&hdmi1 {
-	status = "okay";
-};
-
-&genet {
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-};
-
-&leds {
-	led-pwr {
-		label = "PWR";
-		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-		default-state = "keep";
-		linux,default-trigger = "default-on";
-	};
-};
-
-&pixelvalve0 {
-	status = "okay";
-};
-
-&pixelvalve1 {
-	status = "okay";
-};
-
-&pixelvalve2 {
-	status = "okay";
-};
-
-&pixelvalve4 {
-	status = "okay";
-};
-
-&vc4 {
-	status = "okay";
-};
-
-&vec {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
deleted file mode 100644
index 48e63ab7848c0..0000000000000
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2711.dtsi"
-#include "bcm2711-rpi.dtsi"
-#include "bcm283x-rpi-wifi-bt.dtsi"
-
-/ {
-	compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-
-	sd_io_1v8_reg: regulator-sd-io-1v8 {
-		compatible = "regulator-gpio";
-		regulator-name = "vdd-sd-io";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-settling-time-us = <5000>;
-		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1>,
-			 <3300000 0x0>;
-		status = "okay";
-	};
-
-	sd_vcc_reg: regulator-sd-vcc {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc-sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		enable-active-high;
-		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&bt {
-	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-};
-
-/* EMMC2 is used to drive the eMMC */
-&emmc2 {
-	bus-width = <8>;
-	vqmmc-supply = <&sd_io_1v8_reg>;
-	vmmc-supply = <&sd_vcc_reg>;
-	broken-cd;
-	/* Even the IP block is limited to 100 MHz
-	 * this provides a throughput gain
-	 */
-	mmc-hs200-1_8v;
-	status = "okay";
-};
-
-&expgpio {
-	gpio-line-names = "BT_ON",
-			  "WL_ON",
-			  "PWR_LED_OFF",
-			  "ANT1",
-			  "VDD_SD_IO_SEL",
-			  "CAM_GPIO",
-			  "SD_PWR_ON",
-			  "ANT2";
-
-	ant1: ant1-hog {
-		gpio-hog;
-		gpios = <3 GPIO_ACTIVE_HIGH>;
-		/* internal antenna enabled */
-		output-high;
-		line-name = "ant1";
-	};
-
-	ant2: ant2-hog {
-		gpio-hog;
-		gpios = <7 GPIO_ACTIVE_HIGH>;
-		/* external antenna disabled */
-		output-low;
-		line-name = "ant2";
-	};
-};
-
-&genet {
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii-rxid";
-	status = "okay";
-};
-
-&genet_mdio {
-	phy1: ethernet-phy@0 {
-		/* No PHY interrupt */
-		reg = <0x0>;
-	};
-};
-
-/* uart0 communicates with the BT module */
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
-	uart-has-rtscts;
-};
-
-/* uart1 is mapped to the pin header */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_gpio14>;
-	status = "okay";
-};
-
-&wifi_pwrseq {
-	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
deleted file mode 100644
index 98817a6675b9d..0000000000000
--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm2835-rpi.dtsi"
-
-#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
-
-/ {
-	/* Will be filled by the bootloader */
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0 0>;
-	};
-
-	aliases {
-		emmc2bus = &emmc2bus;
-		ethernet0 = &genet;
-		pcie0 = &pcie0;
-		blconfig = &blconfig;
-	};
-};
-
-&firmware {
-	firmware_clocks: clocks {
-		compatible = "raspberrypi,firmware-clocks";
-		#clock-cells = <1>;
-	};
-
-	expgpio: gpio {
-		compatible = "raspberrypi,firmware-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		status = "okay";
-	};
-
-	reset: reset {
-		compatible = "raspberrypi,firmware-reset";
-		#reset-cells = <1>;
-	};
-};
-
-&hdmi0 {
-	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
-	clock-names = "hdmi", "bvb", "audio", "cec";
-	wifi-2.4ghz-coexistence;
-};
-
-&hdmi1 {
-	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
-	clock-names = "hdmi", "bvb", "audio", "cec";
-	wifi-2.4ghz-coexistence;
-};
-
-&hvs {
-	clocks = <&firmware_clocks 4>;
-};
-
-&rmem {
-	/*
-	 * RPi4's co-processor will copy the board's bootloader configuration
-	 * into memory for the OS to consume. It'll also update this node with
-	 * its placement information.
-	 */
-	blconfig: nvram@0 {
-		compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x0 0x0 0x0>;
-		no-map;
-		status = "disabled";
-	};
-};
-
-&v3d {
-	clocks = <&firmware_clocks 5>;
-};
-
-&vchiq {
-	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
deleted file mode 100644
index 097e9f252235a..0000000000000
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ /dev/null
@@ -1,1172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm283x.dtsi"
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/soc/bcm2835-pm.h>
-
-/ {
-	compatible = "brcm,bcm2711";
-
-	#address-cells = <2>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gicv2>;
-
-	vc4: gpu {
-		compatible = "brcm,bcm2711-vc5";
-		status = "disabled";
-	};
-
-	clk_27MHz: clk-27M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-		clock-output-names = "27MHz-clock";
-	};
-
-	clk_108MHz: clk-108M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <108000000>;
-		clock-output-names = "108MHz-clock";
-	};
-
-	soc {
-		/*
-		 * Defined ranges:
-		 *   Common BCM283x peripherals
-		 *   BCM2711-specific peripherals
-		 *   ARM-local peripherals
-		 */
-		ranges = <0x7e000000  0x0 0xfe000000  0x01800000>,
-			 <0x7c000000  0x0 0xfc000000  0x02000000>,
-			 <0x40000000  0x0 0xff800000  0x00800000>;
-		/* Emulate a contiguous 30-bit address range for DMA */
-		dma-ranges = <0xc0000000  0x0 0x00000000  0x40000000>;
-
-		/*
-		 * This node is the provider for the enable-method for
-		 * bringing up secondary cores.
-		 */
-		local_intc: interrupt-controller@40000000 {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x40000000 0x100>;
-		};
-
-		gicv2: interrupt-controller@40041000 {
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "arm,gic-400";
-			reg =	<0x40041000 0x1000>,
-				<0x40042000 0x2000>,
-				<0x40044000 0x2000>,
-				<0x40046000 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-						 IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		avs_monitor: avs-monitor@7d5d2000 {
-			compatible = "brcm,bcm2711-avs-monitor",
-				     "syscon", "simple-mfd";
-			reg = <0x7d5d2000 0xf00>;
-
-			thermal: thermal {
-				compatible = "brcm,bcm2711-thermal";
-				#thermal-sensor-cells = <0>;
-			};
-		};
-
-		dma: dma@7e007000 {
-			compatible = "brcm,bcm2835-dma";
-			reg = <0x7e007000 0xb00>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				     /* DMA lite 7 - 10 */
-				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "dma0",
-					  "dma1",
-					  "dma2",
-					  "dma3",
-					  "dma4",
-					  "dma5",
-					  "dma6",
-					  "dma7",
-					  "dma8",
-					  "dma9",
-					  "dma10";
-			#dma-cells = <1>;
-			brcm,dma-channel-mask = <0x07f5>;
-		};
-
-		pm: watchdog@7e100000 {
-			compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt";
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x7e100000 0x114>,
-			      <0x7e00a000 0x24>,
-			      <0x7ec11000 0x20>;
-			reg-names = "pm", "asb", "rpivid_asb";
-			clocks = <&clocks BCM2835_CLOCK_V3D>,
-				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
-				 <&clocks BCM2835_CLOCK_H264>,
-				 <&clocks BCM2835_CLOCK_ISP>;
-			clock-names = "v3d", "peri_image", "h264", "isp";
-			system-power-controller;
-		};
-
-		rng@7e104000 {
-			compatible = "brcm,bcm2711-rng200";
-			reg = <0x7e104000 0x28>;
-		};
-
-		uart2: serial@7e201400 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x7e201400 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-			status = "disabled";
-		};
-
-		uart3: serial@7e201600 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x7e201600 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-			status = "disabled";
-		};
-
-		uart4: serial@7e201800 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x7e201800 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-			status = "disabled";
-		};
-
-		uart5: serial@7e201a00 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x7e201a00 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-			status = "disabled";
-		};
-
-		spi3: spi@7e204600 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204600 0x0200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi4: spi@7e204800 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204800 0x0200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi5: spi@7e204a00 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204a00 0x0200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi6: spi@7e204c00 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204c00 0x0200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@7e205600 {
-			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-			reg = <0x7e205600 0x200>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c4: i2c@7e205800 {
-			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-			reg = <0x7e205800 0x200>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c5: i2c@7e205a00 {
-			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-			reg = <0x7e205a00 0x200>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c6: i2c@7e205c00 {
-			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-			reg = <0x7e205c00 0x200>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pixelvalve0: pixelvalve@7e206000 {
-			compatible = "brcm,bcm2711-pixelvalve0";
-			reg = <0x7e206000 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		pixelvalve1: pixelvalve@7e207000 {
-			compatible = "brcm,bcm2711-pixelvalve1";
-			reg = <0x7e207000 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		pixelvalve2: pixelvalve@7e20a000 {
-			compatible = "brcm,bcm2711-pixelvalve2";
-			reg = <0x7e20a000 0x100>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		pwm1: pwm@7e20c800 {
-			compatible = "brcm,bcm2835-pwm";
-			reg = <0x7e20c800 0x28>;
-			clocks = <&clocks BCM2835_CLOCK_PWM>;
-			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
-			assigned-clock-rates = <10000000>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pixelvalve4: pixelvalve@7e216000 {
-			compatible = "brcm,bcm2711-pixelvalve4";
-			reg = <0x7e216000 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		hvs: hvs@7e400000 {
-			compatible = "brcm,bcm2711-hvs";
-			reg = <0x7e400000 0x8000>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pixelvalve3: pixelvalve@7ec12000 {
-			compatible = "brcm,bcm2711-pixelvalve3";
-			reg = <0x7ec12000 0x100>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		vec: vec@7ec13000 {
-			compatible = "brcm,bcm2711-vec";
-			reg = <0x7ec13000 0x1000>;
-			clocks = <&clocks BCM2835_CLOCK_VEC>;
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		dvp: clock@7ef00000 {
-			compatible = "brcm,brcm2711-dvp";
-			reg = <0x7ef00000 0x10>;
-			clocks = <&clk_108MHz>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		aon_intr: interrupt-controller@7ef00100 {
-			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
-			reg = <0x7ef00100 0x30>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		hdmi0: hdmi@7ef00700 {
-			compatible = "brcm,bcm2711-hdmi0";
-			reg = <0x7ef00700 0x300>,
-			      <0x7ef00300 0x200>,
-			      <0x7ef00f00 0x80>,
-			      <0x7ef00f80 0x80>,
-			      <0x7ef01b00 0x200>,
-			      <0x7ef01f00 0x400>,
-			      <0x7ef00200 0x80>,
-			      <0x7ef04300 0x100>,
-			      <0x7ef20000 0x100>;
-			reg-names = "hdmi",
-				    "dvp",
-				    "phy",
-				    "rm",
-				    "packet",
-				    "metadata",
-				    "csc",
-				    "cec",
-				    "hd";
-			clock-names = "hdmi", "bvb", "audio", "cec";
-			resets = <&dvp 0>;
-			interrupt-parent = <&aon_intr>;
-			interrupts = <0>, <1>, <2>,
-				     <3>, <4>, <5>;
-			interrupt-names = "cec-tx", "cec-rx", "cec-low",
-					  "wakeup", "hpd-connected", "hpd-removed";
-			ddc = <&ddc0>;
-			dmas = <&dma 10>;
-			dma-names = "audio-rx";
-			status = "disabled";
-		};
-
-		ddc0: i2c@7ef04500 {
-			compatible = "brcm,bcm2711-hdmi-i2c";
-			reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
-			reg-names = "bsc", "auto-i2c";
-			clock-frequency = <97500>;
-			status = "disabled";
-		};
-
-		hdmi1: hdmi@7ef05700 {
-			compatible = "brcm,bcm2711-hdmi1";
-			reg = <0x7ef05700 0x300>,
-			      <0x7ef05300 0x200>,
-			      <0x7ef05f00 0x80>,
-			      <0x7ef05f80 0x80>,
-			      <0x7ef06b00 0x200>,
-			      <0x7ef06f00 0x400>,
-			      <0x7ef00280 0x80>,
-			      <0x7ef09300 0x100>,
-			      <0x7ef20000 0x100>;
-			reg-names = "hdmi",
-				    "dvp",
-				    "phy",
-				    "rm",
-				    "packet",
-				    "metadata",
-				    "csc",
-				    "cec",
-				    "hd";
-			ddc = <&ddc1>;
-			clock-names = "hdmi", "bvb", "audio", "cec";
-			resets = <&dvp 1>;
-			interrupt-parent = <&aon_intr>;
-			interrupts = <8>, <7>, <6>,
-				     <9>, <10>, <11>;
-			interrupt-names = "cec-tx", "cec-rx", "cec-low",
-					  "wakeup", "hpd-connected", "hpd-removed";
-			dmas = <&dma 17>;
-			dma-names = "audio-rx";
-			status = "disabled";
-		};
-
-		ddc1: i2c@7ef09500 {
-			compatible = "brcm,bcm2711-hdmi-i2c";
-			reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
-			reg-names = "bsc", "auto-i2c";
-			clock-frequency = <97500>;
-			status = "disabled";
-		};
-	};
-
-	/*
-	 * emmc2 has different DMA constraints based on SoC revisions. It was
-	 * moved into its own bus, so as for RPi4's firmware to update them.
-	 * The firmware will find whether the emmc2bus alias is defined, and if
-	 * so, it'll edit the dma-ranges property below accordingly.
-	 */
-	emmc2bus: emmc2bus {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-
-		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
-		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
-
-		emmc2: mmc@7e340000 {
-			compatible = "brcm,bcm2711-emmc2";
-			reg = <0x0 0x7e340000 0x100>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2711_CLOCK_EMMC2>;
-			status = "disabled";
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>;
-		/* This only applies to the ARMv7 stub */
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
-
-		/* Source for d/i-cache-line-size and d/i-cache-sets
-		 * https://developer.arm.com/documentation/100095/0003
-		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
-		 * Source for d/i-cache-size
-		 * https://www.raspberrypi.com/documentation/computers
-		 * /processors.html#bcm2711
-		 */
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000d8>;
-			d-cache-size = <0x8000>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
-			i-cache-size = <0xc000>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
-			next-level-cache = <&l2>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e0>;
-			d-cache-size = <0x8000>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
-			i-cache-size = <0xc000>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
-			next-level-cache = <&l2>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e8>;
-			d-cache-size = <0x8000>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
-			i-cache-size = <0xc000>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
-			next-level-cache = <&l2>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000f0>;
-			d-cache-size = <0x8000>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
-			i-cache-size = <0xc000>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
-			next-level-cache = <&l2>;
-		};
-
-		/* Source for d/i-cache-line-size and d/i-cache-sets
-		 *  https://developer.arm.com/documentation/100095/0003
-		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
-		 *  Source for d/i-cache-size
-		 *  https://www.raspberrypi.com/documentation/computers
-		 *  /processors.html#bcm2711
-		 */
-		l2: l2-cache0 {
-			compatible = "cache";
-			cache-unified;
-			cache-size = <0x100000>;
-			cache-line-size = <64>;
-			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
-			cache-level = <2>;
-		};
-	};
-
-	scb {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-
-		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
-			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
-
-		pcie0: pcie@7d500000 {
-			compatible = "brcm,bcm2711-pcie";
-			reg = <0x0 0x7d500000 0x9310>;
-			device_type = "pci";
-			#address-cells = <3>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pcie", "msi";
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
-							IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &gicv2 GIC_SPI 144
-							IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &gicv2 GIC_SPI 145
-							IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &gicv2 GIC_SPI 146
-							IRQ_TYPE_LEVEL_HIGH>;
-			msi-controller;
-			msi-parent = <&pcie0>;
-
-			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
-				  0x0 0x04000000>;
-			/*
-			 * The wrapper around the PCIe block has a bug
-			 * preventing it from accessing beyond the first 3GB of
-			 * memory.
-			 */
-			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
-				      0x0 0xc0000000>;
-			brcm,enable-ssc;
-		};
-
-		genet: ethernet@7d580000 {
-			compatible = "brcm,bcm2711-genet-v5";
-			reg = <0x0 0x7d580000 0x10000>;
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-
-			genet_mdio: mdio@e14 {
-				compatible = "brcm,genet-mdio-v5";
-				reg = <0xe14 0x8>;
-				reg-names = "mdio";
-				#address-cells = <0x1>;
-				#size-cells = <0x0>;
-			};
-		};
-
-		v3d: gpu@7ec00000 {
-			compatible = "brcm,2711-v3d";
-			reg = <0x0 0x7ec00000 0x4000>,
-			      <0x0 0x7ec04000 0x4000>;
-			reg-names = "hub", "core0";
-
-			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
-			resets = <&pm BCM2835_RESET_V3D>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-};
-
-&clk_osc {
-	clock-frequency = <54000000>;
-};
-
-&clocks {
-	compatible = "brcm,bcm2711-cprman";
-};
-
-&cpu_thermal {
-	coefficients = <(-487) 410040>;
-	thermal-sensors = <&thermal>;
-};
-
-&dsi0 {
-	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&dsi1 {
-	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-	compatible = "brcm,bcm2711-dsi1";
-};
-
-&gpio {
-	compatible = "brcm,bcm2711-gpio";
-	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-
-	gpio-ranges = <&gpio 0 0 58>;
-
-	gpclk0_gpio49: gpclk0-gpio49 {
-		pin-gpclk {
-			pins = "gpio49";
-			function = "alt1";
-			bias-disable;
-		};
-	};
-	gpclk1_gpio50: gpclk1-gpio50 {
-		pin-gpclk {
-			pins = "gpio50";
-			function = "alt1";
-			bias-disable;
-		};
-	};
-	gpclk2_gpio51: gpclk2-gpio51 {
-		pin-gpclk {
-			pins = "gpio51";
-			function = "alt1";
-			bias-disable;
-		};
-	};
-
-	i2c0_gpio46: i2c0-gpio46 {
-		pin-sda {
-			function = "alt0";
-			pins = "gpio46";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt0";
-			pins = "gpio47";
-			bias-disable;
-		};
-	};
-	i2c1_gpio46: i2c1-gpio46 {
-		pin-sda {
-			function = "alt1";
-			pins = "gpio46";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt1";
-			pins = "gpio47";
-			bias-disable;
-		};
-	};
-	i2c3_gpio2: i2c3-gpio2 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio2";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio3";
-			bias-disable;
-		};
-	};
-	i2c3_gpio4: i2c3-gpio4 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio4";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio5";
-			bias-disable;
-		};
-	};
-	i2c4_gpio6: i2c4-gpio6 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio6";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio7";
-			bias-disable;
-		};
-	};
-	i2c4_gpio8: i2c4-gpio8 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio8";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio9";
-			bias-disable;
-		};
-	};
-	i2c5_gpio10: i2c5-gpio10 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio10";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio11";
-			bias-disable;
-		};
-	};
-	i2c5_gpio12: i2c5-gpio12 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio12";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio13";
-			bias-disable;
-		};
-	};
-	i2c6_gpio0: i2c6-gpio0 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio0";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio1";
-			bias-disable;
-		};
-	};
-	i2c6_gpio22: i2c6-gpio22 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio22";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio23";
-			bias-disable;
-		};
-	};
-	i2c_slave_gpio8: i2c-slave-gpio8 {
-		pins-i2c-slave {
-			pins = "gpio8",
-			       "gpio9",
-			       "gpio10",
-			       "gpio11";
-			function = "alt3";
-		};
-	};
-
-	jtag_gpio48: jtag-gpio48 {
-		pins-jtag {
-			pins = "gpio48",
-			       "gpio49",
-			       "gpio50",
-			       "gpio51",
-			       "gpio52",
-			       "gpio53";
-			function = "alt4";
-		};
-	};
-
-	mii_gpio28: mii-gpio28 {
-		pins-mii {
-			pins = "gpio28",
-			       "gpio29",
-			       "gpio30",
-			       "gpio31";
-			function = "alt4";
-		};
-	};
-	mii_gpio36: mii-gpio36 {
-		pins-mii {
-			pins = "gpio36",
-			       "gpio37",
-			       "gpio38",
-			       "gpio39";
-			function = "alt5";
-		};
-	};
-
-	pcm_gpio50: pcm-gpio50 {
-		pins-pcm {
-			pins = "gpio50",
-			       "gpio51",
-			       "gpio52",
-			       "gpio53";
-			function = "alt2";
-		};
-	};
-
-	pwm0_0_gpio12: pwm0-0-gpio12 {
-		pin-pwm {
-			pins = "gpio12";
-			function = "alt0";
-			bias-disable;
-		};
-	};
-	pwm0_0_gpio18: pwm0-0-gpio18 {
-		pin-pwm {
-			pins = "gpio18";
-			function = "alt5";
-			bias-disable;
-		};
-	};
-	pwm1_0_gpio40: pwm1-0-gpio40 {
-		pin-pwm {
-			pins = "gpio40";
-			function = "alt0";
-			bias-disable;
-		};
-	};
-	pwm0_1_gpio13: pwm0-1-gpio13 {
-		pin-pwm {
-			pins = "gpio13";
-			function = "alt0";
-			bias-disable;
-		};
-	};
-	pwm0_1_gpio19: pwm0-1-gpio19 {
-		pin-pwm {
-			pins = "gpio19";
-			function = "alt5";
-			bias-disable;
-		};
-	};
-	pwm1_1_gpio41: pwm1-1-gpio41 {
-		pin-pwm {
-			pins = "gpio41";
-			function = "alt0";
-			bias-disable;
-		};
-	};
-	pwm0_1_gpio45: pwm0-1-gpio45 {
-		pin-pwm {
-			pins = "gpio45";
-			function = "alt0";
-			bias-disable;
-		};
-	};
-	pwm0_0_gpio52: pwm0-0-gpio52 {
-		pin-pwm {
-			pins = "gpio52";
-			function = "alt1";
-			bias-disable;
-		};
-	};
-	pwm0_1_gpio53: pwm0-1-gpio53 {
-		pin-pwm {
-			pins = "gpio53";
-			function = "alt1";
-			bias-disable;
-		};
-	};
-
-	rgmii_gpio35: rgmii-gpio35 {
-		pin-start-stop {
-			pins = "gpio35";
-			function = "alt4";
-		};
-		pin-rx-ok {
-			pins = "gpio36";
-			function = "alt4";
-		};
-	};
-	rgmii_irq_gpio34: rgmii-irq-gpio34 {
-		pin-irq {
-			pins = "gpio34";
-			function = "alt5";
-		};
-	};
-	rgmii_irq_gpio39: rgmii-irq-gpio39 {
-		pin-irq {
-			pins = "gpio39";
-			function = "alt4";
-		};
-	};
-	rgmii_mdio_gpio28: rgmii-mdio-gpio28 {
-		pins-mdio {
-			pins = "gpio28",
-			       "gpio29";
-			function = "alt5";
-		};
-	};
-	rgmii_mdio_gpio37: rgmii-mdio-gpio37 {
-		pins-mdio {
-			pins = "gpio37",
-			       "gpio38";
-			function = "alt4";
-		};
-	};
-
-	spi0_gpio46: spi0-gpio46 {
-		pins-spi {
-			pins = "gpio46",
-			       "gpio47",
-			       "gpio48",
-			       "gpio49";
-			function = "alt2";
-		};
-	};
-	spi2_gpio46: spi2-gpio46 {
-		pins-spi {
-			pins = "gpio46",
-			       "gpio47",
-			       "gpio48",
-			       "gpio49",
-			       "gpio50";
-			function = "alt5";
-		};
-	};
-	spi3_gpio0: spi3-gpio0 {
-		pins-spi {
-			pins = "gpio0",
-			       "gpio1",
-			       "gpio2",
-			       "gpio3";
-			function = "alt3";
-		};
-	};
-	spi4_gpio4: spi4-gpio4 {
-		pins-spi {
-			pins = "gpio4",
-			       "gpio5",
-			       "gpio6",
-			       "gpio7";
-			function = "alt3";
-		};
-	};
-	spi5_gpio12: spi5-gpio12 {
-		pins-spi {
-			pins = "gpio12",
-			       "gpio13",
-			       "gpio14",
-			       "gpio15";
-			function = "alt3";
-		};
-	};
-	spi6_gpio18: spi6-gpio18 {
-		pins-spi {
-			pins = "gpio18",
-			       "gpio19",
-			       "gpio20",
-			       "gpio21";
-			function = "alt3";
-		};
-	};
-
-	uart2_gpio0: uart2-gpio0 {
-		pin-tx {
-			pins = "gpio0";
-			function = "alt4";
-			bias-disable;
-		};
-		pin-rx {
-			pins = "gpio1";
-			function = "alt4";
-			bias-pull-up;
-		};
-	};
-	uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 {
-		pin-cts {
-			pins = "gpio2";
-			function = "alt4";
-			bias-pull-up;
-		};
-		pin-rts {
-			pins = "gpio3";
-			function = "alt4";
-			bias-disable;
-		};
-	};
-	uart3_gpio4: uart3-gpio4 {
-		pin-tx {
-			pins = "gpio4";
-			function = "alt4";
-			bias-disable;
-		};
-		pin-rx {
-			pins = "gpio5";
-			function = "alt4";
-			bias-pull-up;
-		};
-	};
-	uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 {
-		pin-cts {
-			pins = "gpio6";
-			function = "alt4";
-			bias-pull-up;
-		};
-		pin-rts {
-			pins = "gpio7";
-			function = "alt4";
-			bias-disable;
-		};
-	};
-	uart4_gpio8: uart4-gpio8 {
-		pin-tx {
-			pins = "gpio8";
-			function = "alt4";
-			bias-disable;
-		};
-		pin-rx {
-			pins = "gpio9";
-			function = "alt4";
-			bias-pull-up;
-		};
-	};
-	uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 {
-		pin-cts {
-			pins = "gpio10";
-			function = "alt4";
-			bias-pull-up;
-		};
-		pin-rts {
-			pins = "gpio11";
-			function = "alt4";
-			bias-disable;
-		};
-	};
-	uart5_gpio12: uart5-gpio12 {
-		pin-tx {
-			pins = "gpio12";
-			function = "alt4";
-			bias-disable;
-		};
-		pin-rx {
-			pins = "gpio13";
-			function = "alt4";
-			bias-pull-up;
-		};
-	};
-	uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 {
-		pin-cts {
-			pins = "gpio14";
-			function = "alt4";
-			bias-pull-up;
-		};
-		pin-rts {
-			pins = "gpio15";
-			function = "alt4";
-			bias-disable;
-		};
-	};
-};
-
-&rmem {
-	#address-cells = <2>;
-};
-
-&cma {
-	/*
-	 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
-	 * that's not good enough for the BCM2711 as some devices can
-	 * only address the lower 1G of memory (ZONE_DMA).
-	 */
-	alloc-ranges = <0x0 0x00000000 0x40000000>;
-};
-
-&i2c0 {
-	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&i2c1 {
-	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&mailbox {
-	interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&sdhci {
-	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&sdhost {
-	interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&spi {
-	interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&spi1 {
-	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&spi2 {
-	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&system_timer {
-	interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&txp {
-	interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart0 {
-	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart1 {
-	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usb {
-	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&vec {
-	compatible = "brcm,bcm2711-vec";
-	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
deleted file mode 100644
index 60c8ab8a28557..0000000000000
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2013 Broadcom Corporation
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm11351.dtsi"
-
-/ {
-	model = "BCM28155 AP board";
-	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	serial@3e000000 {
-		status = "okay";
-	};
-
-	i2c@3e016000 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e017000 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e018000 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3500d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		pmu: pmu@8 {
-			reg = <0x08>;
-		};
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		vmmc-supply = <&camldo1_reg>;
-		vqmmc-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		vmmc-supply = <&sdldo_reg>;
-		vqmmc-supply = <&sdxldo_reg>;
-		status = "okay";
-	};
-
-	pwm: pwm@3e01a000 {
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		vusb_d-supply = <&usbldo_reg>;
-		vusb_a-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
-
-#include "bcm59056.dtsi"
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-	regulators {
-		camldo1_reg: camldo1 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdldo_reg: sdldo {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		sdxldo_reg: sdxldo {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		usbldo_reg: usbldo {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		iosr1_reg: iosr1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
deleted file mode 100644
index bb7e8f7facafd..0000000000000
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ /dev/null
@@ -1,208 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/* This include file covers the common peripherals and configuration between
- * bcm2835, bcm2836 and bcm2837 implementations.
- */
-
-/ {
-	interrupt-parent = <&intc>;
-
-	soc {
-		dma: dma@7e007000 {
-			compatible = "brcm,bcm2835-dma";
-			reg = <0x7e007000 0xf00>;
-			interrupts = <1 16>,
-				     <1 17>,
-				     <1 18>,
-				     <1 19>,
-				     <1 20>,
-				     <1 21>,
-				     <1 22>,
-				     <1 23>,
-				     <1 24>,
-				     <1 25>,
-				     <1 26>,
-				     /* dma channel 11-14 share one irq */
-				     <1 27>,
-				     <1 27>,
-				     <1 27>,
-				     <1 27>,
-				     /* unused shared irq for all channels */
-				     <1 28>;
-			interrupt-names = "dma0",
-					  "dma1",
-					  "dma2",
-					  "dma3",
-					  "dma4",
-					  "dma5",
-					  "dma6",
-					  "dma7",
-					  "dma8",
-					  "dma9",
-					  "dma10",
-					  "dma11",
-					  "dma12",
-					  "dma13",
-					  "dma14",
-					  "dma-shared-all";
-			#dma-cells = <1>;
-			brcm,dma-channel-mask = <0x7f35>;
-		};
-
-		intc: interrupt-controller@7e00b200 {
-			compatible = "brcm,bcm2835-armctrl-ic";
-			reg = <0x7e00b200 0x200>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pm: watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x7e100000 0x114>,
-			      <0x7e00a000 0x24>;
-			reg-names = "pm", "asb";
-			clocks = <&clocks BCM2835_CLOCK_V3D>,
-				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
-				 <&clocks BCM2835_CLOCK_H264>,
-				 <&clocks BCM2835_CLOCK_ISP>;
-			clock-names = "v3d", "peri_image", "h264", "isp";
-			system-power-controller;
-		};
-
-		rng@7e104000 {
-			compatible = "brcm,bcm2835-rng";
-			reg = <0x7e104000 0x10>;
-			interrupts = <2 29>;
-		};
-
-		pixelvalve@7e206000 {
-			compatible = "brcm,bcm2835-pixelvalve0";
-			reg = <0x7e206000 0x100>;
-			interrupts = <2 13>; /* pwa0 */
-		};
-
-		pixelvalve@7e207000 {
-			compatible = "brcm,bcm2835-pixelvalve1";
-			reg = <0x7e207000 0x100>;
-			interrupts = <2 14>; /* pwa1 */
-		};
-
-		thermal: thermal@7e212000 {
-			compatible = "brcm,bcm2835-thermal";
-			reg = <0x7e212000 0x8>;
-			clocks = <&clocks BCM2835_CLOCK_TSENS>;
-			#thermal-sensor-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@7e805000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e805000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "okay";
-		};
-
-		vec: vec@7e806000 {
-			compatible = "brcm,bcm2835-vec";
-			reg = <0x7e806000 0x1000>;
-			clocks = <&clocks BCM2835_CLOCK_VEC>;
-			interrupts = <2 27>;
-			status = "disabled";
-		};
-
-		pixelvalve@7e807000 {
-			compatible = "brcm,bcm2835-pixelvalve2";
-			reg = <0x7e807000 0x100>;
-			interrupts = <2 10>; /* pixelvalve */
-		};
-
-		hdmi: hdmi@7e902000 {
-			compatible = "brcm,bcm2835-hdmi";
-			reg = <0x7e902000 0x600>,
-			      <0x7e808000 0x100>;
-			interrupts = <2 8>, <2 9>;
-			ddc = <&i2c2>;
-			clocks = <&clocks BCM2835_PLLH_PIX>,
-				 <&clocks BCM2835_CLOCK_HSM>;
-			clock-names = "pixel", "hdmi";
-			dmas = <&dma 17>;
-			dma-names = "audio-rx";
-			status = "disabled";
-		};
-
-		v3d: v3d@7ec00000 {
-			compatible = "brcm,bcm2835-v3d";
-			reg = <0x7ec00000 0x1000>;
-			interrupts = <1 10>;
-		};
-
-		vc4: gpu {
-			compatible = "brcm,bcm2835-vc4";
-		};
-	};
-};
-
-&cpu_thermal {
-	thermal-sensors = <&thermal>;
-};
-
-&gpio {
-	i2c_slave_gpio18: i2c-slave-gpio18 {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	jtag_gpio4: jtag-gpio4 {
-		brcm,pins = <4 5 6 12 13>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-
-	pwm0_gpio12: pwm0-gpio12 {
-		brcm,pins = <12>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-	pwm0_gpio18: pwm0-gpio18 {
-		brcm,pins = <18>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-	pwm0_gpio40: pwm0-gpio40 {
-		brcm,pins = <40>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-	pwm1_gpio13: pwm1-gpio13 {
-		brcm,pins = <13>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-	pwm1_gpio19: pwm1-gpio19 {
-		brcm,pins = <19>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-	pwm1_gpio41: pwm1-gpio41 {
-		brcm,pins = <41>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-	pwm1_gpio45: pwm1-gpio45 {
-		brcm,pins = <45>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&i2s {
-	dmas = <&dma 2>, <&dma 3>;
-	dma-names = "tx", "rx";
-};
-
-&sdhost {
-	dmas = <&dma 13>;
-	dma-names = "rx-tx";
-};
-
-&spi {
-	dmas = <&dma 6>, <&dma 7>;
-	dma-names = "tx", "rx";
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
deleted file mode 100644
index 02ce817868ba7..0000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ /dev/null
@@ -1,129 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm2835-rpi-common.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
-	model = "Raspberry Pi Model A+";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-};
-
-&gpio {
-	/*
-	 * This is based on the unreleased schematic for the Model A+.
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "SDA0",
-			  "SCL0",
-			  "", /* GPIO30 */
-			  "", /* GPIO31 */
-			  "CAM_GPIO1", /* GPIO32 */
-			  "", /* GPIO33 */
-			  "", /* GPIO34 */
-			  "PWR_LOW_N", /* GPIO35 */
-			  "", /* GPIO36 */
-			  "", /* GPIO37 */
-			  "USB_LIMIT", /* GPIO38 */
-			  "", /* GPIO39 */
-			  "PWM0_OUT", /* GPIO40 */
-			  "CAM_GPIO0", /* GPIO41 */
-			  "", /* GPIO42 */
-			  "", /* GPIO43 */
-			  "", /* GPIO44 */
-			  "PWM1_OUT", /* GPIO45 */
-			  "HDMI_HPD_N",
-			  "STATUS_LED",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
-
-	/* I2S interface */
-	i2s_alt0: i2s_alt0 {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-};
-
-&leds {
-	led-pwr {
-		label = "PWR";
-		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-		default-state = "keep";
-		linux,default-trigger = "default-on";
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-	status = "okay";
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
deleted file mode 100644
index 3fdf60eb11dc9..0000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm2835-rpi-common.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-a", "brcm,bcm2835";
-	model = "Raspberry Pi Model A";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
-	 * RPI00021 sheet 02
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "SDA0",
-			  "SCL0",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "CAM_GPIO1",
-			  "LAN_RUN",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "", /* GPIO12 */
-			  "", /* GPIO13 */
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "STATUS_LED_N",
-			  "GPIO17",
-			  "GPIO18",
-			  "", /* GPIO19 */
-			  "", /* GPIO20 */
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "", /* GPIO26 */
-			  "CAM_GPIO0",
-			  /* Binary number representing build/revision */
-			  "CONFIG0",
-			  "CONFIG1",
-			  "CONFIG2",
-			  "CONFIG3",
-			  "", /* GPIO32 */
-			  "", /* GPIO33 */
-			  "", /* GPIO34 */
-			  "", /* GPIO35 */
-			  "", /* GPIO36 */
-			  "", /* GPIO37 */
-			  "", /* GPIO38 */
-			  "", /* GPIO39 */
-			  "PWM0_OUT",
-			  "", /* GPIO41 */
-			  "", /* GPIO42 */
-			  "", /* GPIO43 */
-			  "", /* GPIO44 */
-			  "PWM1_OUT",
-			  "HDMI_HPD_P",
-			  "SD_CARD_DET",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
-
-	/* I2S interface */
-	i2s_alt2: i2s_alt2 {
-		brcm,pins = <28 29 30 31>;
-		brcm,function = <BCM2835_FSEL_ALT2>;
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-	status = "okay";
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
deleted file mode 100644
index 9956fd06a4b63..0000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm2835-rpi-common.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-smsc9514.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
-	model = "Raspberry Pi Model B+";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x20000000>;
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf
-	 * RPI-BPLUS sheet 1
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "SDA0",
-			  "SCL0",
-			  "", /* GPIO30 */
-			  "LAN_RUN", /* GPIO31 */
-			  "CAM_GPIO1", /* GPIO32 */
-			  "", /* GPIO33 */
-			  "", /* GPIO34 */
-			  "PWR_LOW_N", /* GPIO35 */
-			  "", /* GPIO36 */
-			  "", /* GPIO37 */
-			  "USB_LIMIT", /* GPIO38 */
-			  "", /* GPIO39 */
-			  "PWM0_OUT", /* GPIO40 */
-			  "CAM_GPIO0", /* GPIO41 */
-			  "", /* GPIO42 */
-			  "", /* GPIO43 */
-			  "ETH_CLK", /* GPIO44 */
-			  "PWM1_OUT", /* GPIO45 */
-			  "HDMI_HPD_N",
-			  "STATUS_LED",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
-
-	/* I2S interface */
-	i2s_alt0: i2s_alt0 {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-};
-
-&leds {
-	led-pwr {
-		label = "PWR";
-		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-		default-state = "keep";
-		linux,default-trigger = "default-on";
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-	status = "okay";
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
deleted file mode 100644
index 4e1770afb145d..0000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm2835-rpi-common.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-smsc9512.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
-	model = "Raspberry Pi Model B rev2";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf
-	 * RPI00022 sheet 02
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "SDA0",
-			  "SCL0",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "CAM_CLK",
-			  "LAN_RUN",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "", /* GPIO12 */
-			  "", /* GPIO13 */
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "STATUS_LED_N",
-			  "GPIO17",
-			  "GPIO18",
-			  "", /* GPIO19 */
-			  "", /* GPIO20 */
-			  "CAM_GPIO",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "", /* GPIO26 */
-			  "GPIO27",
-			  "GPIO28",
-			  "GPIO29",
-			  "GPIO30",
-			  "GPIO31",
-			  "", /* GPIO32 */
-			  "", /* GPIO33 */
-			  "", /* GPIO34 */
-			  "", /* GPIO35 */
-			  "", /* GPIO36 */
-			  "", /* GPIO37 */
-			  "", /* GPIO38 */
-			  "", /* GPIO39 */
-			  "PWM0_OUT",
-			  "", /* GPIO41 */
-			  "", /* GPIO42 */
-			  "", /* GPIO43 */
-			  "", /* GPIO44 */
-			  "PWM1_OUT",
-			  "HDMI_HPD_P",
-			  "SD_CARD_DET",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
-
-	/* I2S interface */
-	i2s_alt2: i2s_alt2 {
-		brcm,pins = <28 29 30 31>;
-		brcm,function = <BCM2835_FSEL_ALT2>;
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-	status = "okay";
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
deleted file mode 100644
index eec1d0892d332..0000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm2835-rpi-common.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-smsc9512.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-b", "brcm,bcm2835";
-	model = "Raspberry Pi Model B";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
-	 * RPI00021 sheet 02
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "SDA0",
-			  "SCL0",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "CAM_GPIO1",
-			  "LAN_RUN",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "", /* GPIO12 */
-			  "", /* GPIO13 */
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "STATUS_LED_N",
-			  "GPIO17",
-			  "GPIO18",
-			  "", /* GPIO19 */
-			  "", /* GPIO20 */
-			  "CAM_GPIO0",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "", /* GPIO26 */
-			  "GPIO27",
-			  "GPIO28",
-			  "GPIO29",
-			  "GPIO30",
-			  "GPIO31",
-			  "", /* GPIO32 */
-			  "", /* GPIO33 */
-			  "", /* GPIO34 */
-			  "", /* GPIO35 */
-			  "", /* GPIO36 */
-			  "", /* GPIO37 */
-			  "", /* GPIO38 */
-			  "", /* GPIO39 */
-			  "PWM0_OUT",
-			  "", /* GPIO41 */
-			  "", /* GPIO42 */
-			  "", /* GPIO43 */
-			  "", /* GPIO44 */
-			  "PWM1_OUT",
-			  "HDMI_HPD_P",
-			  "SD_CARD_DET",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0>;
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-	status = "okay";
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
deleted file mode 100644
index 87958a96c3e0c..0000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2835-rpi-cm1.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,compute-module", "brcm,bcm2835";
-	model = "Raspberry Pi Compute Module IO board rev1";
-};
-
-&gpio {
-	/*
-	 * This is based on the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "GPIO0",
-			  "GPIO1",
-			  "GPIO2",
-			  "GPIO3",
-			  "GPIO4",
-			  "GPIO5",
-			  "GPIO6",
-			  "GPIO7",
-			  "GPIO8",
-			  "GPIO9",
-			  "GPIO10",
-			  "GPIO11",
-			  "GPIO12",
-			  "GPIO13",
-			  "GPIO14",
-			  "GPIO15",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "GPIO28",
-			  "GPIO29",
-			  "GPIO30",
-			  "GPIO31",
-			  "GPIO32",
-			  "GPIO33",
-			  "GPIO34",
-			  "GPIO35",
-			  "GPIO36",
-			  "GPIO37",
-			  "GPIO38",
-			  "GPIO39",
-			  "GPIO40",
-			  "GPIO41",
-			  "GPIO42",
-			  "GPIO43",
-			  "GPIO44",
-			  "GPIO45",
-			  "HDMI_HPD_N",
-			  /* Also used as ACT LED */
-			  "EMMC_EN_N",
-			  /* Used by eMMC */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0>;
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
deleted file mode 100644
index 750cd76948e37..0000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm2835-rpi-common.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-
-/ {
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x20000000>;
-	};
-
-	reg_3v3: fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_1v8: fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-};
-
-&led_act {
-	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-};
-
-&sdhost {
-	non-removable;
-	vmmc-supply = <&reg_3v3>;
-	vqmmc-supply = <&reg_1v8>;
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
deleted file mode 100644
index 4e7b4a592da7c..0000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This include file covers the common peripherals and configuration between
- * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
- * firmware interface.
- */
-
-#include <dt-bindings/power/raspberrypi-power.h>
-
-&firmware {
-	firmware_clocks: clocks {
-		compatible = "raspberrypi,firmware-clocks";
-		#clock-cells = <1>;
-	};
-};
-
-&hdmi {
-	clocks = <&firmware_clocks 9>,
-		 <&firmware_clocks 13>;
-	clock-names = "pixel", "hdmi";
-};
-
-&v3d {
-	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
-};
-
-&vec {
-	clocks = <&firmware_clocks 15>;
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
deleted file mode 100644
index dbf825985ec0b..0000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
- */
-
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm2835-rpi-common.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-usb-otg.dtsi"
-#include "bcm283x-rpi-wifi-bt.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
-	model = "Raspberry Pi Zero W";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x20000000>;
-	};
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-};
-
-&bt {
-	shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
-};
-
-&gpio {
-	/*
-	 * This is based on the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "SDA0",
-			  "SCL0",
-			  /* Used by BT module */
-			  "CTS0",
-			  "RTS0",
-			  "TXD0",
-			  "RXD0",
-			  /* Used by Wifi */
-			  "SD1_CLK",
-			  "SD1_CMD",
-			  "SD1_DATA0",
-			  "SD1_DATA1",
-			  "SD1_DATA2",
-			  "SD1_DATA3",
-			  "CAM_GPIO1", /* GPIO40 */
-			  "WL_ON", /* GPIO41 */
-			  "", /* GPIO42 */
-			  "WIFI_CLK", /* GPIO43 */
-			  "CAM_GPIO0", /* GPIO44 */
-			  "BT_ON", /* GPIO45 */
-			  "HDMI_HPD_N",
-			  "STATUS_LED_N",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0>;
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-};
-
-&sdhci {
-	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_gpio14>;
-	status = "okay";
-};
-
-&wifi_pwrseq {
-	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
deleted file mode 100644
index f80e65a825fd6..0000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com>
- */
-
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm2835-rpi-common.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-usb-otg.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
-	model = "Raspberry Pi Zero";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x20000000>;
-	};
-};
-
-&gpio {
-	/*
-	 * This is based on the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "SDA0",
-			  "SCL0",
-			  "", /* GPIO30 */
-			  "", /* GPIO31 */
-			  "CAM_GPIO1", /* GPIO32 */
-			  "", /* GPIO33 */
-			  "", /* GPIO34 */
-			  "", /* GPIO35 */
-			  "", /* GPIO36 */
-			  "", /* GPIO37 */
-			  "", /* GPIO38 */
-			  "", /* GPIO39 */
-			  "", /* GPIO40 */
-			  "CAM_GPIO0", /* GPIO41 */
-			  "", /* GPIO42 */
-			  "", /* GPIO43 */
-			  "", /* GPIO44 */
-			  "", /* GPIO45 */
-			  "HDMI_HPD_N",
-			  "STATUS_LED_N",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
-
-	/* I2S interface */
-	i2s_alt0: i2s_alt0 {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
deleted file mode 100644
index ee9ee9d1fe654..0000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ /dev/null
@@ -1,71 +0,0 @@
-#include <dt-bindings/power/raspberrypi-power.h>
-
-/ {
-	soc {
-		firmware: firmware {
-			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			mboxes = <&mailbox>;
-			dma-ranges;
-		};
-
-		power: power {
-			compatible = "raspberrypi,bcm2835-power";
-			firmware = <&firmware>;
-			#power-domain-cells = <1>;
-		};
-
-		vchiq: mailbox@7e00b840 {
-			compatible = "brcm,bcm2835-vchiq";
-			reg = <0x7e00b840 0x3c>;
-			interrupts = <0 2>;
-		};
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-
-	gpioout: gpioout {
-		brcm,pins = <6>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	alt0: alt0 {
-		brcm,pins = <4 5 7 8 9 10 11>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_gpio0>;
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_gpio2>;
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&usb {
-	power-domains = <&power RPI_POWER_DOMAIN_USB>;
-};
-
-&vec {
-	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
-	status = "okay";
-};
-
-&dsi0 {
-	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
-};
-
-&dsi1 {
-	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
-};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
deleted file mode 100644
index 15cb331febbba..0000000000000
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm283x.dtsi"
-#include "bcm2835-common.dtsi"
-
-/ {
-	compatible = "brcm,bcm2835";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm1176jzf-s";
-			reg = <0x0>;
-			/* Source for d/i-cache-line-size and d/i-cache-sets
-			 * https://developer.arm.com/documentation/ddi0301
-			 * /h/level-one-memory-system/cache-organization?lang=en
-			 *
-			 * Source for d/i-cache-size
-			 * https://forums.raspberrypi.com/viewtopic.php?t=98428
-			 *
-			 * NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU
-			 * It can be shared with the CPU through fw settings,
-			 * but this is not recommended.
-			 */
-			d-cache-size = <0x4000>;
-			d-cache-line-size = <16>;
-			d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
-			i-cache-size = <0x4000>;
-			i-cache-line-size = <16>;
-			i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
-		};
-	};
-
-	soc {
-		ranges = <0x7e000000 0x20000000 0x02000000>;
-		dma-ranges = <0x40000000 0x00000000 0x20000000>;
-	};
-
-	arm-pmu {
-		compatible = "arm,arm1176-pmu";
-	};
-};
-
-&cpu_thermal {
-	coefficients = <(-538)	407000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
-	compatible = "brcm,bcm2835-thermal";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
deleted file mode 100644
index 6068ec3900817..0000000000000
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2836.dtsi"
-#include "bcm2836-rpi.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-smsc9514.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
-	model = "Raspberry Pi 2 Model B";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and
-	 * the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "SDA0",
-			  "SCL0",
-			  "", /* GPIO30 */
-			  "LAN_RUN",
-			  "CAM_GPIO1",
-			  "", /* GPIO33 */
-			  "", /* GPIO34 */
-			  "PWR_LOW_N",
-			  "", /* GPIO36 */
-			  "", /* GPIO37 */
-			  "USB_LIMIT",
-			  "", /* GPIO39 */
-			  "PWM0_OUT",
-			  "CAM_GPIO0",
-			  "SMPS_SCL",
-			  "SMPS_SDA",
-			  "ETH_CLK",
-			  "PWM1_OUT",
-			  "HDMI_HPD_N",
-			  "STATUS_LED",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
-
-	/* I2S interface */
-	i2s_alt0: i2s_alt0 {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-};
-
-&leds {
-	led-pwr {
-		label = "PWR";
-		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-		default-state = "keep";
-		linux,default-trigger = "default-on";
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-	status = "okay";
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2836-rpi.dtsi b/arch/arm/boot/dts/bcm2836-rpi.dtsi
deleted file mode 100644
index 48b03b55ff56b..0000000000000
--- a/arch/arm/boot/dts/bcm2836-rpi.dtsi
+++ /dev/null
@@ -1,7 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm2835-rpi.dtsi"
-#include "bcm2835-rpi-common.dtsi"
-
-&vchiq {
-	compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
-};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
deleted file mode 100644
index 783fe624ba688..0000000000000
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ /dev/null
@@ -1,142 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm283x.dtsi"
-#include "bcm2835-common.dtsi"
-
-/ {
-	compatible = "brcm,bcm2836";
-
-	soc {
-		ranges = <0x7e000000 0x3f000000 0x1000000>,
-			 <0x40000000 0x40000000 0x00001000>;
-		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
-
-		local_intc: interrupt-controller@40000000 {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x40000000 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&local_intc>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupt-parent = <&local_intc>;
-		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&local_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
-			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
-			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
-			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
-		always-on;
-	};
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm2836-smp";
-
-		/* Source for d/i-cache-line-size and d/i-cache-sets
-		 * https://developer.arm.com/documentation/ddi0464/f/L1-Memory-System
-		 * /About-the-L1-memory-system?lang=en
-		 *
-		 * Source for d/i-cache-size
-		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
-		 */
-
-		v7_cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf00>;
-			clock-frequency = <800000000>;
-			d-cache-size = <0x8000>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
-			i-cache-size = <0x8000>;
-			i-cache-line-size = <32>;
-			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
-			next-level-cache = <&l2>;
-		};
-
-		v7_cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf01>;
-			clock-frequency = <800000000>;
-			d-cache-size = <0x8000>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
-			i-cache-size = <0x8000>;
-			i-cache-line-size = <32>;
-			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
-			next-level-cache = <&l2>;
-		};
-
-		v7_cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf02>;
-			clock-frequency = <800000000>;
-			d-cache-size = <0x8000>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
-			i-cache-size = <0x8000>;
-			i-cache-line-size = <32>;
-			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
-			next-level-cache = <&l2>;
-		};
-
-		v7_cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf03>;
-			clock-frequency = <800000000>;
-			d-cache-size = <0x8000>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
-			i-cache-size = <0x8000>;
-			i-cache-line-size = <32>;
-			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
-			next-level-cache = <&l2>;
-		};
-
-		/* Source for cache-line-size + cache-sets
-		 * https://developer.arm.com/documentation/ddi0464/f/L2-Memory-System
-		 * /About-the-L2-Memory-system?lang=en
-		 * Source for cache-size
-		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
-		 */
-		l2: l2-cache0 {
-			compatible = "cache";
-			cache-unified;
-			cache-size = <0x80000>;
-			cache-line-size = <64>;
-			cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
-			cache-level = <2>;
-		};
-	};
-};
-
-/* Make the BCM2835-style global interrupt controller be a child of the
- * CPU-local interrupt controller.
- */
-&intc {
-	compatible = "brcm,bcm2836-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-parent = <&local_intc>;
-	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&cpu_thermal {
-	coefficients = <(-538)	407000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
-	compatible = "brcm,bcm2836-thermal";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
deleted file mode 100644
index 3548306dfbcb3..0000000000000
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2837.dtsi"
-#include "bcm2836-rpi.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-#include "bcm283x-rpi-wifi-bt.dtsi"
-
-/ {
-	compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
-	model = "Raspberry Pi 3 Model A+";
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x20000000>;
-	};
-};
-
-&firmware {
-	expgpio: gpio {
-		compatible = "raspberrypi,firmware-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "",
-				  "BT_WL_ON",
-				  "STATUS_LED_R",
-				  "",
-				  "",
-				  "CAM_GPIO0",
-				  "CAM_GPIO1",
-				  "";
-		status = "okay";
-	};
-};
-
-&gpio {
-	/*
-	 * This is mostly based on the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD1",
-			  "RXD1",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "HDMI_HPD_N",
-			  "STATUS_LED_G",
-			  /* Used by BT module */
-			  "CTS0",
-			  "RTS0",
-			  "TXD0",
-			  "RXD0",
-			  /* Used by Wifi */
-			  "SD1_CLK",
-			  "SD1_CMD",
-			  "SD1_DATA0",
-			  "SD1_DATA1",
-			  "SD1_DATA2",
-			  "SD1_DATA3",
-			  "PWM0_OUT",
-			  "PWM1_OUT",
-			  "", /* GPIO42 */
-			  "WIFI_CLK",
-			  "SDA0",
-			  "SCL0",
-			  "SMPS_SCL",
-			  "SMPS_SDA",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-};
-
-&leds {
-	led-pwr {
-		label = "PWR";
-		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-		default-state = "keep";
-		linux,default-trigger = "default-on";
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
-	status = "okay";
-};
-
-/* SDHOST is used to drive the SD card */
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	status = "okay";
-	bus-width = <4>;
-};
-
-/* uart0 communicates with the BT module
- *
- * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
- * by a single GPIO. We can't give GPIO control to one of the drivers,
- * otherwise the other part would get unexpectedly disturbed.
- */
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
-};
-
-/* uart1 is mapped to the pin header */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
deleted file mode 100644
index 2f1800cbc5221..0000000000000
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2837.dtsi"
-#include "bcm2836-rpi.dtsi"
-#include "bcm283x-rpi-lan7515.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-#include "bcm283x-rpi-wifi-bt.dtsi"
-
-/ {
-	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
-	model = "Raspberry Pi 3 Model B+";
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-};
-
-&bt {
-	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-};
-
-&firmware {
-	expgpio: gpio {
-		compatible = "raspberrypi,firmware-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "BT_ON",
-				  "WL_ON",
-				  "PWR_LED_R",
-				  "LAN_RUN",
-				  "",
-				  "CAM_GPIO0",
-				  "CAM_GPIO1",
-				  "";
-		status = "okay";
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and
-	 * the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD1",
-			  "RXD1",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "HDMI_HPD_N",
-			  "STATUS_LED_G",
-			  /* Used by BT module */
-			  "CTS0",
-			  "RTS0",
-			  "TXD0",
-			  "RXD0",
-			  /* Used by Wifi */
-			  "SD1_CLK",
-			  "SD1_CMD",
-			  "SD1_DATA0",
-			  "SD1_DATA1",
-			  "SD1_DATA2",
-			  "SD1_DATA3",
-			  "PWM0_OUT",
-			  "PWM1_OUT",
-			  "ETH_CLK",
-			  "WIFI_CLK",
-			  "SDA0",
-			  "SCL0",
-			  "SMPS_SCL",
-			  "SMPS_SDA",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-};
-
-&leds {
-	led-pwr {
-		label = "PWR";
-		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-		default-state = "keep";
-		linux,default-trigger = "default-on";
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
-	status = "okay";
-};
-
-/* SDHOST is used to drive the SD card */
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	status = "okay";
-	bus-width = <4>;
-};
-
-/* uart0 communicates with the BT module */
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
-};
-
-/* uart1 is mapped to the pin header */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_gpio14>;
-	status = "okay";
-};
-
-&wifi_pwrseq {
-	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
deleted file mode 100644
index 61270340075c1..0000000000000
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2837.dtsi"
-#include "bcm2836-rpi.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-smsc9514.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-#include "bcm283x-rpi-wifi-bt.dtsi"
-
-/ {
-	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
-	model = "Raspberry Pi 3 Model B";
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-};
-
-&bt {
-	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-};
-
-&firmware {
-	expgpio: gpio {
-		compatible = "raspberrypi,firmware-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "BT_ON",
-				  "WL_ON",
-				  "STATUS_LED",
-				  "LAN_RUN",
-				  "HDMI_HPD_N",
-				  "CAM_GPIO0",
-				  "CAM_GPIO1",
-				  "PWR_LOW_N";
-		status = "okay";
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from rpi_SCH_3b_1p2_reduced.pdf and
-	 * the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD1",
-			  "RXD1",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "", /* GPIO 28 */
-			  "LAN_RUN_BOOT",
-			  /* Used by BT module */
-			  "CTS0",
-			  "RTS0",
-			  "TXD0",
-			  "RXD0",
-			  /* Used by Wifi */
-			  "SD1_CLK",
-			  "SD1_CMD",
-			  "SD1_DATA0",
-			  "SD1_DATA1",
-			  "SD1_DATA2",
-			  "SD1_DATA3",
-			  "PWM0_OUT",
-			  "PWM1_OUT",
-			  "ETH_CLK",
-			  "WIFI_CLK",
-			  "SDA0",
-			  "SCL0",
-			  "SMPS_SCL",
-			  "SMPS_SDA",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
-	status = "okay";
-};
-
-&hdmi {
-	hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
-};
-
-/* uart0 communicates with the BT module */
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
-};
-
-/* uart1 is mapped to the pin header */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_gpio14>;
-	status = "okay";
-};
-
-/* SDHOST is used to drive the SD card */
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	status = "okay";
-	bus-width = <4>;
-};
-
-&wifi_pwrseq {
-	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
deleted file mode 100644
index cf84e69fced83..0000000000000
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2837-rpi-cm3.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
-	model = "Raspberry Pi Compute Module 3 IO board V3.0";
-};
-
-&gpio {
-	/*
-	 * This is based on the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "GPIO0",
-			  "GPIO1",
-			  "GPIO2",
-			  "GPIO3",
-			  "GPIO4",
-			  "GPIO5",
-			  "GPIO6",
-			  "GPIO7",
-			  "GPIO8",
-			  "GPIO9",
-			  "GPIO10",
-			  "GPIO11",
-			  "GPIO12",
-			  "GPIO13",
-			  "GPIO14",
-			  "GPIO15",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "GPIO28",
-			  "GPIO29",
-			  "GPIO30",
-			  "GPIO31",
-			  "GPIO32",
-			  "GPIO33",
-			  "GPIO34",
-			  "GPIO35",
-			  "GPIO36",
-			  "GPIO37",
-			  "GPIO38",
-			  "GPIO39",
-			  "GPIO40",
-			  "GPIO41",
-			  "GPIO42",
-			  "GPIO43",
-			  "GPIO44",
-			  "GPIO45",
-			  "SMPS_SCL",
-			  "SMPS_SDA",
-			  /* Used by eMMC */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0>;
-};
-
-&hdmi {
-	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
deleted file mode 100644
index 1e4e4946b6b61..0000000000000
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2837.dtsi"
-#include "bcm2836-rpi.dtsi"
-
-/ {
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-
-	reg_3v3: fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_1v8: fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-};
-
-&firmware {
-	expgpio: gpio {
-		compatible = "raspberrypi,firmware-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "HDMI_HPD_N",
-				  "EMMC_EN_N",
-				  "",
-				  "",
-				  "",
-				  "",
-				  "",
-				  "";
-		status = "okay";
-	};
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3v3>;
-	vqmmc-supply = <&reg_1v8>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
deleted file mode 100644
index b9cc4594398b1..0000000000000
--- a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
+++ /dev/null
@@ -1,135 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2022 Stefan Wahren <stefan.wahren@i2se.com>
- */
-
-/dts-v1/;
-#include "bcm2837.dtsi"
-#include "bcm2836-rpi.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-usb-otg.dtsi"
-#include "bcm283x-rpi-wifi-bt.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837";
-	model = "Raspberry Pi Zero 2 W";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x20000000>;
-	};
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-};
-
-&bt {
-	shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-};
-
-&gpio {
-	/*
-	 * This is based on the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "HDMI_HPD_N",
-			  "STATUS_LED_N",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "CAM_GPIO0", /* GPIO40 */
-			  "WL_ON", /* GPIO41 */
-			  "BT_ON", /* GPIO42 */
-			  "WIFI_CLK", /* GPIO43 */
-			  "SDA0", /* GPIO44 */
-			  "SCL0", /* GPIO45 */
-			  "SMPS_SCL",
-			  "SMPS_SDA",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0>;
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&led_act {
-	gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-};
-
-&sdhci {
-	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_gpio14>;
-	status = "okay";
-};
-
-&wifi_pwrseq {
-	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
deleted file mode 100644
index 84c08b46519da..0000000000000
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ /dev/null
@@ -1,144 +0,0 @@
-#include "bcm283x.dtsi"
-#include "bcm2835-common.dtsi"
-
-/ {
-	compatible = "brcm,bcm2837";
-
-	soc {
-		ranges = <0x7e000000 0x3f000000 0x1000000>,
-			 <0x40000000 0x40000000 0x00001000>;
-		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
-
-		local_intc: local_intc@40000000 {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x40000000 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&local_intc>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupt-parent = <&local_intc>;
-		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&local_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
-			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
-			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
-			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
-		always-on;
-	};
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
-
-		/* Source for d/i-cache-line-size and d/i-cache-sets
-		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
-		 * /about-the-l1-memory-system?lang=en
-		 *
-		 * Source for d/i-cache-size
-		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
-		 */
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000d8>;
-			d-cache-size = <0x8000>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
-			i-cache-size = <0x8000>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
-			next-level-cache = <&l2>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e0>;
-			d-cache-size = <0x8000>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
-			i-cache-size = <0x8000>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
-			next-level-cache = <&l2>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e8>;
-			d-cache-size = <0x8000>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
-			i-cache-size = <0x8000>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
-			next-level-cache = <&l2>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000f0>;
-			d-cache-size = <0x8000>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
-			i-cache-size = <0x8000>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
-			next-level-cache = <&l2>;
-		};
-
-		/* Source for cache-line-size + cache-sets
-		 * https://developer.arm.com/documentation/ddi0500
-		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
-		 * Source for cache-size
-		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
-		 */
-		l2: l2-cache0 {
-			compatible = "cache";
-			cache-unified;
-			cache-size = <0x80000>;
-			cache-line-size = <64>;
-			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
-			cache-level = <2>;
-		};
-	};
-};
-
-/* Make the BCM2835-style global interrupt controller be a child of the
- * CPU-local interrupt controller.
- */
-&intc {
-	compatible = "brcm,bcm2836-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-parent = <&local_intc>;
-	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&cpu_thermal {
-	coefficients = <(-538)	412000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
-	compatible = "brcm,bcm2837-thermal";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
deleted file mode 100644
index 70bece63f9a74..0000000000000
--- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/net/microchip-lan78xx.h>
-
-/ {
-	aliases {
-		ethernet0 = &ethernet;
-	};
-};
-
-&usb {
-	usb-port@1 {
-		compatible = "usb424,2514";
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb-port@1 {
-			compatible = "usb424,2514";
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ethernet: ethernet@1 {
-				compatible = "usb424,7800";
-				reg = <1>;
-
-				mdio {
-					#address-cells = <0x1>;
-					#size-cells = <0x0>;
-					eth_phy: ethernet-phy@1 {
-						reg = <1>;
-						microchip,led-modes = <
-							LAN78XX_LINK_1000_ACTIVITY
-							LAN78XX_LINK_10_100_ACTIVITY
-						>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi b/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi
deleted file mode 100644
index f83e56de1a725..0000000000000
--- a/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/ {
-	/*
-	 * This file provides the now deprecated ACT LED to the
-	 * Raspberry Pi boards. Please don't include this file
-	 * for new boards!
-	 */
-	leds: leds {
-		compatible = "gpio-leds";
-
-		led_act: led-act {
-			label = "ACT";
-			default-state = "keep";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
deleted file mode 100644
index 882b138070754..0000000000000
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/ {
-	aliases {
-		ethernet0 = &ethernet;
-	};
-};
-
-&usb {
-	usb1@1 {
-		compatible = "usb424,9512";
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethernet: ethernet@1 {
-			compatible = "usb424,ec00";
-			reg = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
deleted file mode 100644
index 4273b90b53cc0..0000000000000
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-/ {
-	aliases {
-		ethernet0 = &ethernet;
-	};
-};
-
-&usb {
-	usb1@1 {
-		compatible = "usb424,9514";
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethernet: ethernet@1 {
-			compatible = "usb424,ec00";
-			reg = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
deleted file mode 100644
index 73f4ece8dcd0d..0000000000000
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
+++ /dev/null
@@ -1,3 +0,0 @@
-&usb {
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
deleted file mode 100644
index e2fd9610e1252..0000000000000
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-&usb {
-	dr_mode = "otg";
-	g-rx-fifo-size = <256>;
-	g-np-tx-fifo-size = <32>;
-	/*
-	 * According to dwc2 the sum of all device EP
-	 * fifo sizes shouldn't exceed 3776 bytes.
-	 */
-	g-tx-fifo-size = <256 256 512 512 512 768 768>;
-};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
deleted file mode 100644
index 0ff0e9e253272..0000000000000
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
+++ /dev/null
@@ -1,7 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-&usb {
-	dr_mode = "peripheral";
-	g-rx-fifo-size = <256>;
-	g-np-tx-fifo-size = <32>;
-	g-tx-fifo-size = <256 256 512 512 512 768 768>;
-};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi b/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi
deleted file mode 100644
index 0b64cc19941f3..0000000000000
--- a/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/ {
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-	};
-};
-
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
-	bus-width = <4>;
-	non-removable;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-/* uart0 communicates with the BT module */
-&uart0 {
-	status = "okay";
-
-	bt: bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
deleted file mode 100644
index c9c52a19ef3b4..0000000000000
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ /dev/null
@@ -1,501 +0,0 @@
-#include <dt-bindings/pinctrl/bcm2835.h>
-#include <dt-bindings/clock/bcm2835.h>
-#include <dt-bindings/clock/bcm2835-aux.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/soc/bcm2835-pm.h>
-
-/* firmware-provided startup stubs live here, where the secondary CPUs are
- * spinning.
- */
-/memreserve/ 0x00000000 0x00001000;
-
-/* This include file covers the common peripherals and configuration between
- * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
- * bcm2835.dtsi and bcm2836.dtsi.
- */
-
-/ {
-	compatible = "brcm,bcm2835";
-	model = "BCM2835";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	rmem: reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		cma: linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x4000000>; /* 64MB */
-			reusable;
-			linux,cma-default;
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <1000>;
-
-			trips {
-				cpu-crit {
-					temperature = <90000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-			};
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		system_timer: timer@7e003000 {
-			compatible = "brcm,bcm2835-system-timer";
-			reg = <0x7e003000 0x1000>;
-			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
-			/* This could be a reference to BCM2835_CLOCK_TIMER,
-			 * but we don't have the driver using the common clock
-			 * support yet.
-			 */
-			clock-frequency = <1000000>;
-		};
-
-		txp: txp@7e004000 {
-			compatible = "brcm,bcm2835-txp";
-			reg = <0x7e004000 0x20>;
-			interrupts = <1 11>;
-		};
-
-		clocks: cprman@7e101000 {
-			compatible = "brcm,bcm2835-cprman";
-			#clock-cells = <1>;
-			reg = <0x7e101000 0x2000>;
-
-			/* CPRMAN derives almost everything from the
-			 * platform's oscillator.  However, the DSI
-			 * pixel clocks come from the DSI analog PHY.
-			 */
-			clocks = <&clk_osc>,
-				<&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
-				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
-		};
-
-		mailbox: mailbox@7e00b880 {
-			compatible = "brcm,bcm2835-mbox";
-			reg = <0x7e00b880 0x40>;
-			interrupts = <0 1>;
-			#mbox-cells = <0>;
-		};
-
-		gpio: gpio@7e200000 {
-			compatible = "brcm,bcm2835-gpio";
-			reg = <0x7e200000 0xb4>;
-			/*
-			 * The GPIO IP block is designed for 3 banks of GPIOs.
-			 * Each bank has a GPIO interrupt for itself.
-			 * There is an overall "any bank" interrupt.
-			 * In order, these are GIC interrupts 17, 18, 19, 20.
-			 * Since the BCM2835 only has 2 banks, the 2nd bank
-			 * interrupt output appears to be mirrored onto the
-			 * 3rd bank's interrupt signal.
-			 * So, a bank0 interrupt shows up on 17, 20, and
-			 * a bank1 interrupt shows up on 18, 19, 20!
-			 */
-			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			gpio-ranges = <&gpio 0 0 54>;
-
-			/* Defines common pin muxing groups
-			 *
-			 * While each pin can have its mux selected
-			 * for various functions individually, some
-			 * groups only make sense to switch to a
-			 * particular function together.
-			 */
-			dpi_gpio0: dpi-gpio0 {
-				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
-					     12 13 14 15 16 17 18 19
-					     20 21 22 23 24 25 26 27>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-			emmc_gpio22: emmc-gpio22 {
-				brcm,pins = <22 23 24 25 26 27>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
-			emmc_gpio34: emmc-gpio34 {
-				brcm,pins = <34 35 36 37 38 39>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-				brcm,pull = <BCM2835_PUD_OFF
-					     BCM2835_PUD_UP
-					     BCM2835_PUD_UP
-					     BCM2835_PUD_UP
-					     BCM2835_PUD_UP
-					     BCM2835_PUD_UP>;
-			};
-			emmc_gpio48: emmc-gpio48 {
-				brcm,pins = <48 49 50 51 52 53>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
-
-			gpclk0_gpio4: gpclk0-gpio4 {
-				brcm,pins = <4>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk1_gpio5: gpclk1-gpio5 {
-				brcm,pins = <5>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk1_gpio42: gpclk1-gpio42 {
-				brcm,pins = <42>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk1_gpio44: gpclk1-gpio44 {
-				brcm,pins = <44>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk2_gpio6: gpclk2-gpio6 {
-				brcm,pins = <6>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk2_gpio43: gpclk2-gpio43 {
-				brcm,pins = <43>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-				brcm,pull = <BCM2835_PUD_OFF>;
-			};
-
-			i2c0_gpio0: i2c0-gpio0 {
-				brcm,pins = <0 1>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			i2c0_gpio28: i2c0-gpio28 {
-				brcm,pins = <28 29>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			i2c0_gpio44: i2c0-gpio44 {
-				brcm,pins = <44 45>;
-				brcm,function = <BCM2835_FSEL_ALT1>;
-			};
-			i2c1_gpio2: i2c1-gpio2 {
-				brcm,pins = <2 3>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			i2c1_gpio44: i2c1-gpio44 {
-				brcm,pins = <44 45>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-
-			jtag_gpio22: jtag-gpio22 {
-				brcm,pins = <22 23 24 25 26 27>;
-				brcm,function = <BCM2835_FSEL_ALT4>;
-			};
-
-			pcm_gpio18: pcm-gpio18 {
-				brcm,pins = <18 19 20 21>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			pcm_gpio28: pcm-gpio28 {
-				brcm,pins = <28 29 30 31>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-
-			sdhost_gpio48: sdhost-gpio48 {
-				brcm,pins = <48 49 50 51 52 53>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-
-			spi0_gpio7: spi0-gpio7 {
-				brcm,pins = <7 8 9 10 11>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			spi0_gpio35: spi0-gpio35 {
-				brcm,pins = <35 36 37 38 39>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			spi1_gpio16: spi1-gpio16 {
-				brcm,pins = <16 17 18 19 20 21>;
-				brcm,function = <BCM2835_FSEL_ALT4>;
-			};
-			spi2_gpio40: spi2-gpio40 {
-				brcm,pins = <40 41 42 43 44 45>;
-				brcm,function = <BCM2835_FSEL_ALT4>;
-			};
-
-			uart0_gpio14: uart0-gpio14 {
-				brcm,pins = <14 15>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			/* Separate from the uart0_gpio14 group
-			 * because it conflicts with spi1_gpio16, and
-			 * people often run uart0 on the two pins
-			 * without flow control.
-			 */
-			uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 {
-				brcm,pins = <16 17>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
-			uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 {
-				brcm,pins = <30 31>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-				brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-			};
-			uart0_gpio32: uart0-gpio32 {
-				brcm,pins = <32 33>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-				brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-			};
-			uart0_gpio36: uart0-gpio36 {
-				brcm,pins = <36 37>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-			uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 {
-				brcm,pins = <38 39>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-
-			uart1_gpio14: uart1-gpio14 {
-				brcm,pins = <14 15>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 {
-				brcm,pins = <16 17>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_gpio32: uart1-gpio32 {
-				brcm,pins = <32 33>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 {
-				brcm,pins = <30 31>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_gpio40: uart1-gpio40 {
-				brcm,pins = <40 41>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 {
-				brcm,pins = <42 43>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-		};
-
-		uart0: serial@7e201000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x7e201000 0x200>;
-			interrupts = <2 25>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-		};
-
-		sdhost: mmc@7e202000 {
-			compatible = "brcm,bcm2835-sdhost";
-			reg = <0x7e202000 0x100>;
-			interrupts = <2 24>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			status = "disabled";
-		};
-
-		i2s: i2s@7e203000 {
-			compatible = "brcm,bcm2835-i2s";
-			reg = <0x7e203000 0x24>;
-			clocks = <&clocks BCM2835_CLOCK_PCM>;
-			status = "disabled";
-		};
-
-		spi: spi@7e204000 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204000 0x200>;
-			interrupts = <2 22>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@7e205000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205000 0x200>;
-			interrupts = <2 21>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		dpi: dpi@7e208000 {
-			compatible = "brcm,bcm2835-dpi";
-			reg = <0x7e208000 0x8c>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>,
-				 <&clocks BCM2835_CLOCK_DPI>;
-			clock-names = "core", "pixel";
-			status = "disabled";
-		};
-
-		dsi0: dsi@7e209000 {
-			compatible = "brcm,bcm2835-dsi0";
-			reg = <0x7e209000 0x78>;
-			interrupts = <2 4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#clock-cells = <1>;
-
-			clocks = <&clocks BCM2835_PLLA_DSI0>,
-				 <&clocks BCM2835_CLOCK_DSI0E>,
-				 <&clocks BCM2835_CLOCK_DSI0P>;
-			clock-names = "phy", "escape", "pixel";
-
-			clock-output-names = "dsi0_byte",
-					     "dsi0_ddr2",
-					     "dsi0_ddr";
-
-			status = "disabled";
-		};
-
-		aux: aux@7e215000 {
-			compatible = "brcm,bcm2835-aux";
-			#clock-cells = <1>;
-			reg = <0x7e215000 0x8>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-		};
-
-		uart1: serial@7e215040 {
-			compatible = "brcm,bcm2835-aux-uart";
-			reg = <0x7e215040 0x40>;
-			interrupts = <1 29>;
-			clocks = <&aux BCM2835_AUX_CLOCK_UART>;
-			status = "disabled";
-		};
-
-		spi1: spi@7e215080 {
-			compatible = "brcm,bcm2835-aux-spi";
-			reg = <0x7e215080 0x40>;
-			interrupts = <1 29>;
-			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi2: spi@7e2150c0 {
-			compatible = "brcm,bcm2835-aux-spi";
-			reg = <0x7e2150c0 0x40>;
-			interrupts = <1 29>;
-			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pwm: pwm@7e20c000 {
-			compatible = "brcm,bcm2835-pwm";
-			reg = <0x7e20c000 0x28>;
-			clocks = <&clocks BCM2835_CLOCK_PWM>;
-			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
-			assigned-clock-rates = <10000000>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		sdhci: mmc@7e300000 {
-			compatible = "brcm,bcm2835-sdhci";
-			reg = <0x7e300000 0x100>;
-			interrupts = <2 30>;
-			clocks = <&clocks BCM2835_CLOCK_EMMC>;
-			status = "disabled";
-		};
-
-		hvs@7e400000 {
-			compatible = "brcm,bcm2835-hvs";
-			reg = <0x7e400000 0x6000>;
-			interrupts = <2 1>;
-		};
-
-		dsi1: dsi@7e700000 {
-			compatible = "brcm,bcm2835-dsi1";
-			reg = <0x7e700000 0x8c>;
-			interrupts = <2 12>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#clock-cells = <1>;
-
-			clocks = <&clocks BCM2835_PLLD_DSI1>,
-				 <&clocks BCM2835_CLOCK_DSI1E>,
-				 <&clocks BCM2835_CLOCK_DSI1P>;
-			clock-names = "phy", "escape", "pixel";
-
-			clock-output-names = "dsi1_byte",
-					     "dsi1_ddr2",
-					     "dsi1_ddr";
-
-			status = "disabled";
-		};
-
-		i2c1: i2c@7e804000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e804000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usb: usb@7e980000 {
-			compatible = "brcm,bcm2835-usb";
-			reg = <0x7e980000 0x10000>;
-			interrupts = <1 9>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clk_usb>;
-			clock-names = "otg";
-			phys = <&usbphy>;
-			phy-names = "usb2-phy";
-		};
-	};
-
-	clocks {
-		/* The oscillator is the root of the clock tree. */
-		clk_osc: clk-osc {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-output-names = "osc";
-			clock-frequency = <19200000>;
-		};
-
-		clk_usb: clk-usb {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-output-names = "otg";
-			clock-frequency = <480000000>;
-		};
-	};
-
-	usbphy: phy {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
deleted file mode 100644
index c80ac16ad9496..0000000000000
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Asus RT-AC56U
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "asus,rt-ac56u", "brcm,bcm4708";
-	model = "Asus RT-AC56U (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-usb3 {
-			label = "bcm53xx:blue:usb3";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-		};
-
-		led-wan {
-			label = "bcm53xx:blue:wan";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		led-lan {
-			label = "bcm53xx:blue:lan";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		led-power {
-			label = "bcm53xx:blue:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-all {
-			label = "bcm53xx:blue:all";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb2 {
-			label = "bcm53xx:blue:usb2";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
deleted file mode 100644
index 3fe17bd7b86d2..0000000000000
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Asus RT-AC68U
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "asus,rt-ac68u", "brcm,bcm4708";
-	model = "Asus RT-AC68U (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-usb2 {
-			label = "bcm53xx:blue:usb2";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-		};
-
-		led-power {
-			label = "bcm53xx:blue:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-logo {
-			label = "bcm53xx:white:logo";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-usb3 {
-			label = "bcm53xx:blue:usb3";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-brightness {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-
-		button-rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
deleted file mode 100644
index e583b9cbf07c0..0000000000000
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
- */
-
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-#include <dt-bindings/leds/common.h>
-
-/ {
-	spi {
-		compatible = "spi-gpio";
-		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
-		cs-gpios = <&chipcommon 6 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hc595: gpio_spi@0 {
-			compatible = "fairchild,74hc595";
-			reg = <0>;
-			registers-number = <1>;
-			spi-max-frequency = <100000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-usb {
-			/* label = "bcm53xx:blue:usb"; */
-			function = LED_FUNCTION_USB;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>, <&ohci_port2>,
-					  <&ehci_port2>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-power0 {
-			/* label = "bcm53xx:red:power"; */
-			function = LED_FUNCTION_FAULT;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-power1 {
-			/* label = "bcm53xx:white:power"; */
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_WHITE>;
-			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-router0 {
-			/*  label = "bcm53xx:blue:router"; */
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-router1 {
-			/* label = "bcm53xx:amber:router"; */
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_AMBER>;
-			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wan {
-			/* label = "bcm53xx:blue:wan"; */
-			function = LED_FUNCTION_WAN;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-wireless0 {
-			/* label = "bcm53xx:blue:wireless"; */
-			function = LED_FUNCTION_WLAN;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wireless1 {
-			/* label = "bcm53xx:amber:wireless"; */
-			function = LED_FUNCTION_WLAN;
-			color = <LED_COLOR_ID_AMBER>;
-			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-
-		button-aoss {
-			label = "AOSS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Commit mode set by switch? */
-		button-mode {
-			label = "Mode";
-			linux,code = <KEY_SETUP>;
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Switch: AP mode */
-		button-sw-ap {
-			label = "AP";
-			linux,code = <BTN_0>;
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-
-		button-eject {
-			label = "USB eject";
-			linux,code = <KEY_EJECTCD>;
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan1";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan2";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan3";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan4";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
deleted file mode 100644
index 8e506269fa1a2..0000000000000
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree Bindigs for Buffalo WZR-1166DHP
- *
- * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
-
-/ {
-	compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708";
-	model = "Buffalo WZR-1166DHP";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
deleted file mode 100644
index 596129027074e..0000000000000
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree Bindigs for Buffalo WZR-1166DHP2
- *
- * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
-
-/ {
-	compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708";
-	model = "Buffalo WZR-1166DHP2";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
deleted file mode 100644
index 43c698a0a7c39..0000000000000
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Buffalo WZR-1750DHP
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708";
-	model = "Buffalo WZR-1750DHP (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	spi {
-		compatible = "spi-gpio";
-		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
-		cs-gpios = <&chipcommon 6 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hc595: gpio_spi@0 {
-			compatible = "fairchild,74hc595";
-			reg = <0>;
-			registers-number = <1>;
-			spi-max-frequency = <100000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-usb {
-			label = "bcm53xx:blue:usb";
-			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>, <&ohci_port2>,
-					  <&ehci_port2>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-power0 {
-			label = "bcm53xx:red:power";
-			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-power1 {
-			label = "bcm53xx:white:power";
-			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-router0 {
-			label = "bcm53xx:blue:router";
-			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-router1 {
-			label = "bcm53xx:amber:router";
-			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wan {
-			label = "bcm53xx:blue:wan";
-			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-wireless0 {
-			label = "bcm53xx:blue:wireless";
-			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wireless1 {
-			label = "bcm53xx:amber:wireless";
-			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-
-		button-aoss {
-			label = "AOSS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Commit mode set by switch? */
-		button-mode {
-			label = "Mode";
-			linux,code = <KEY_SETUP>;
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Switch: AP mode */
-		button-sw-ap {
-			label = "AP";
-			linux,code = <BTN_0>;
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-
-		button-eject {
-			label = "USB eject";
-			linux,code = <KEY_EJECTCD>;
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
deleted file mode 100644
index 0ed25bf71f0df..0000000000000
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "linksys,ea6300-v1", "brcm,bcm4708";
-	model = "Linksys EA6300 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	nvram@1c080000 {
-		compatible = "brcm,nvram";
-		reg = <0x1c080000 0x180000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
deleted file mode 100644
index f1412ba83defb..0000000000000
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "linksys,ea6500-v2", "brcm,bcm4708";
-	model = "Linksys EA6500 V2";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
deleted file mode 100644
index 6de7fe204b0c0..0000000000000
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2016 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-
-/ {
-	compatible = "luxul,xap-1510v1", "brcm,bcm4708";
-	model = "Luxul XAP-1510 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led-2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led-status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "poe";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "lan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
deleted file mode 100644
index f5b75ba935124..0000000000000
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Luxul XWC-1000
- *
- * Copyright 2014 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,xwc-1000", "brcm,bcm4708";
-	model = "Luxul XWC-1000 (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	nand_controller: nand-controller@18028000 {
-		nand@0 {
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "ubi";
-					reg = <0x00000000 0x08000000>;
-				};
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@4 {
-			reg = <4>;
-			label = "lan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
deleted file mode 100644
index 89155caf50bef..0000000000000
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X arm platform code.
- * DTS for Netgear R6250 V1
- *
- * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "netgear,r6250v1", "brcm,bcm4708";
-	model = "Netgear R6250 V1 (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-logo {
-			label = "bcm53xx:white:logo";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-power0 {
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-power1 {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb {
-			label = "bcm53xx:blue:usb";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-wireless {
-			label = "bcm53xx:blue:wireless";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		button-rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan4";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan3";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan1";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
deleted file mode 100644
index 57d00a0b4765a..0000000000000
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Netgear R6300 V2
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "netgear,r6300v2", "brcm,bcm4708";
-	model = "Netgear R6300 V2 (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-logo {
-			label = "bcm53xx:white:logo";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-power0 {
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		led-power1 {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-usb {
-			label = "bcm53xx:blue:usb";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-		};
-
-		led-wireless {
-			label = "bcm53xx:blue:wireless";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		button-rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
deleted file mode 100644
index 26cdeb5cc3377..0000000000000
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ /dev/null
@@ -1,160 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X arm platform code.
- * DTS for SmartRG SR400ac
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "smartrg,sr400ac", "brcm,bcm4708";
-	model = "SmartRG SR400ac";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-usb2 {
-			label = "bcm53xx:white:usb2";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&ohci_port2>, <&ehci_port2>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-usb3-white {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-usb3-green {
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-wps {
-			label = "bcm53xx:white:wps";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-status-red {
-			label = "bcm53xx:red:status";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-status-green {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-status-blue {
-			label = "bcm53xx:blue:status";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wan-white {
-			label = "bcm53xx:white:wan";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wan-red {
-			label = "bcm53xx:red:wan";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan4";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan3";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan1";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
deleted file mode 100644
index 1a19e97a987db..0000000000000
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for BCM4708 SoC.
- *
- * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-#include "bcm5301x.dtsi"
-
-/ {
-	compatible = "brcm,bcm4708";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm-nsp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			secondary-boot-reg = <0xffff0400>;
-			reg = <0x1>;
-		};
-	};
-
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
deleted file mode 100644
index 3854db0118a99..0000000000000
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Asus RT-N18U
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Asus RT-N18U (BCM47081)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power {
-			label = "bcm53xx:blue:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-usb2 {
-			label = "bcm53xx:blue:usb2";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		led-wan {
-			label = "bcm53xx:blue:wan";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-lan {
-			label = "bcm53xx:blue:lan";
-			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-usb3 {
-			label = "bcm53xx:blue:usb3";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
deleted file mode 100644
index 407319cb5c0dd..0000000000000
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Buffalo WZR-600DHP2
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Buffalo WZR-600DHP2 (BCM47081)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	spi {
-		compatible = "spi-gpio";
-		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
-		cs-gpios = <&chipcommon 6 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hc595: gpio_spi@0 {
-			compatible = "fairchild,74hc595";
-			reg = <0>;
-			registers-number = <1>;
-			spi-max-frequency = <100000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power0 {
-			label = "bcm53xx:green:power";
-			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-power1 {
-			label = "bcm53xx:red:power";
-			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-router0 {
-			label = "bcm53xx:green:router";
-			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-router1 {
-			label = "bcm53xx:amber:router";
-			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wan {
-			label = "bcm53xx:green:wan";
-			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-wireless0 {
-			label = "bcm53xx:green:wireless";
-			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wireless1 {
-			label = "bcm53xx:amber:wireless";
-			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-aoss {
-			label = "AOSS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Switch device mode? */
-		button-mode {
-			label = "Mode";
-			linux,code = <KEY_SETUP>;
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-
-		button-eject {
-			label = "USB eject";
-			linux,code = <KEY_EJECTCD>;
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan1";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan2";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan3";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan4";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
deleted file mode 100644
index f8622ecce6a2b..0000000000000
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Buffalo WZR-900DHP
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Buffalo WZR-900DHP (BCM47081)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	spi {
-		compatible = "spi-gpio";
-		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
-		cs-gpios = <&chipcommon 6 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hc595: gpio_spi@0 {
-			compatible = "fairchild,74hc595";
-			reg = <0>;
-			registers-number = <1>;
-			spi-max-frequency = <100000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-usb {
-			label = "bcm53xx:green:usb";
-			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-power0 {
-			label = "bcm53xx:green:power";
-			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-power1 {
-			label = "bcm53xx:red:power";
-			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-router0 {
-			label = "bcm53xx:green:router";
-			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-router1 {
-			label = "bcm53xx:amber:router";
-			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wan {
-			label = "bcm53xx:green:wan";
-			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-wireless0 {
-			label = "bcm53xx:green:wireless";
-			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wireless1 {
-			label = "bcm53xx:amber:wireless";
-			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
deleted file mode 100644
index 76c9b30b868d4..0000000000000
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-
-/ {
-	compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Luxul XAP-1410 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led-2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led-status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@4 {
-			reg = <4>;
-			label = "poe";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
deleted file mode 100644
index 6ef0c0788e625..0000000000000
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-#include "bcm5301x-nand-cs0-bch4.dtsi"
-
-/ {
-	compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Luxul XWR-1200 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	nvram@1eff0000 {
-		compatible = "brcm,nvram";
-		reg = <0x1eff0000 0x10000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power {
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-lan3 {
-			label = "bcm53xx:green:lan3";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led-lan4 {
-			label = "bcm53xx:green:lan4";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led-wan {
-			label = "bcm53xx:green:wan";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led-lan2 {
-			label = "bcm53xx:green:lan2";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led-usb {
-			label = "bcm53xx:green:usb";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port2>, <&ehci_port2>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		led-2ghz {
-			label = "bcm53xx:green:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led-5ghz {
-			label = "bcm53xx:green:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led-lan1 {
-			label = "bcm53xx:green:lan1";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan4";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan3";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan1";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
deleted file mode 100644
index b6a5886698b2a..0000000000000
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-
-/ {
-	compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
-	model = "TP-LINK Archer C5 V2";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-2ghz {
-			label = "bcm53xx:green:2ghz";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-lan {
-			label = "bcm53xx:green:lan";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-usb2-port1 {
-			label = "bcm53xx:green:usb2-port1";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-power {
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-wan-green {
-			label = "bcm53xx:green:wan";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wps {
-			label = "bcm53xx:green:wps";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-5ghz {
-			label = "bcm53xx:green:5ghz";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-usb2-port2 {
-			label = "bcm53xx:green:usb2-port2";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&ohci_port2>, <&ehci_port2>;
-			linux,default-trigger = "usbport";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-
-	partitions {
-		compatible = "tplink,safeloader-partitions";
-		partitions-table-offset = <0xe50000>;
-
-		partition-os-image {
-			compatible = "brcm,trx";
-		};
-
-		partition-file-system {
-			linux,rootfs;
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-};
diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi
deleted file mode 100644
index ed13af028528e..0000000000000
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for BCM47081 SoC.
- *
- * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
- */
-
-#include "bcm5301x.dtsi"
-
-/ {
-	compatible = "brcm,bcm47081";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
deleted file mode 100644
index 4f44cb4df7049..0000000000000
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Asus RT-AC87U
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Asus RT-AC87U";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-wps {
-			label = "bcm53xx:blue:wps";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		led-power {
-			label = "bcm53xx:blue:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-wan {
-			label = "bcm53xx:red:wan";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&nandcs {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot@0 {
-			label = "boot";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-
-		nvram@80000 {
-			label = "nvram";
-			reg = <0x00080000 0x00180000>;
-		};
-
-		firmware@200000 {
-			label = "firmware";
-			reg = <0x00200000 0x07cc0000>;
-			compatible = "brcm,trx";
-		};
-
-		asus@7ec0000 {
-			label = "asus";
-			reg = <0x07ec0000 0x00140000>;
-			read-only;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
deleted file mode 100644
index b7cd2faa30cea..0000000000000
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Buffalo WXR-1900DHP
- *
- * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Buffalo WXR-1900DHP";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-usb {
-			label = "bcm53xx:green:usb";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-router-amber {
-			label = "bcm53xx:amber:router";
-			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-router-white {
-			label = "bcm53xx:white:router";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wan-white {
-			label = "bcm53xx:white:wan";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wireless-amber {
-			label = "bcm53xx:amber:wireless";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wireless-white {
-			label = "bcm53xx:white:wireless";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-power {
-			label = "Power";
-			linux,code = <KEY_POWER>;
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-		};
-
-		button-aoss {
-			label = "AOSS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Commit mode set by switch? */
-		button-mode {
-			label = "Mode";
-			linux,code = <KEY_SETUP>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Switch: AP mode */
-		button-sw-ap {
-			label = "AP";
-			linux,code = <BTN_0>;
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-		};
-
-		button-eject {
-			label = "USB eject";
-			linux,code = <KEY_EJECTCD>;
-			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-
-&usb2 {
-	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
deleted file mode 100644
index 99253fd7adb31..0000000000000
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Linksys EA9200";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	nvram@1c080000 {
-		compatible = "brcm,nvram";
-		reg = <0x1c080000 0x180000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
deleted file mode 100644
index 24ba8f8f9bf36..0000000000000
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Netgear R7000
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Netgear R7000";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		led-5ghz {
-			label = "bcm53xx:white:5ghz";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-		};
-
-		led-2ghz {
-			label = "bcm53xx:white:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led-wps {
-			label = "bcm53xx:white:wps";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wireless {
-			label = "bcm53xx:white:wireless";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-usb3 {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb2 {
-			label = "bcm53xx:white:usb2";
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		button-rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
deleted file mode 100644
index 14303ab521ea4..0000000000000
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Netgear R8000
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Netgear R8000 (BCM4709)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		led-wan-white {
-			label = "bcm53xx:white:wan";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-5ghz-1 {
-			label = "bcm53xx:white:5ghz-1";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-		};
-
-		led-2ghz {
-			label = "bcm53xx:white:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led-wireless {
-			label = "bcm53xx:white:wireless";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wps {
-			label = "bcm53xx:white:wps";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-5ghz-2 {
-			label = "bcm53xx:white:5ghz-2";
-			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb3 {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb2 {
-			label = "bcm53xx:white:usb2";
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-
-		button-brightness {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pcie0 {
-	#address-cells = <3>;
-	#size-cells = <2>;
-
-	bridge@0,0,0 {
-		reg = <0x0000 0 0 0 0>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		wifi@0,1,0 {
-			reg = <0x0000 0 0 0 0>;
-			ieee80211-freq-limit = <5735000 5835000>;
-		};
-	};
-};
-
-&pcie1 {
-	#address-cells = <3>;
-	#size-cells = <2>;
-
-	bridge@1,0,0 {
-		reg = <0x0000 0 0 0 0>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		bridge@1,1,0 {
-			reg = <0x0000 0 0 0 0>;
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bridge@1,2,2 {
-				reg = <0x1000 0 0 0 0>;
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				wifi@1,4,0 {
-					reg = <0x0000 0 0 0 0>;
-					ieee80211-freq-limit = <5170000 5730000>;
-				};
-			};
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan1";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan2";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan3";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan4";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@8 {
-			reg = <8>;
-			label = "cpu";
-			ethernet = <&gmac2>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
deleted file mode 100644
index 5a8b2b1567e66..0000000000000
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-
-/ {
-	compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
-	model = "TP-LINK Archer C9 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-lan {
-			label = "bcm53xx:blue:lan";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wps {
-			label = "bcm53xx:blue:wps";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-usb3 {
-			label = "bcm53xx:blue:usb3";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-usb2 {
-			label = "bcm53xx:blue:usb2";
-			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&ohci_port2>, <&ehci_port2>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-wan-blue {
-			label = "bcm53xx:blue:wan";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-power {
-			label = "bcm53xx:blue:power";
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-
-	partitions {
-		compatible = "tplink,safeloader-partitions";
-		partitions-table-offset = <0xe50000>;
-
-		partition-os-image {
-			compatible = "brcm,trx";
-		};
-
-		partition-file-system {
-			linux,rootfs;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
deleted file mode 100644
index cba3d910bed81..0000000000000
--- a/arch/arm/boot/dts/bcm4709.dtsi
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- */
-
-#include "bcm4708.dtsi"
-
-&uart0 {
-	clock-frequency = <125000000>;
-	status = "okay";
-};
-
-&srab {
-	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-};
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
deleted file mode 100644
index a50ff686b557e..0000000000000
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ /dev/null
@@ -1,284 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2021-2022 Arınç ÜNAL <arinc.unal@arinc9.com>
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Asus RT-AC88U";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	nvram@1c080000 {
-		compatible = "brcm,nvram";
-		reg = <0x1c080000 0x00180000>;
-
-		et1macaddr: et1macaddr {
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power {
-			label = "white:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-wan-red {
-			label = "red:wan";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-lan {
-			label = "white:lan";
-			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb2 {
-			label = "white:usb2";
-			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ehci_port2>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-usb3 {
-			label = "white:usb3";
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ehci_port1>, <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-wps {
-			label = "white:wps";
-			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-		};
-
-		button-reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wifi {
-			label = "Wi-Fi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-		};
-
-		button-led {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	switch {
-		compatible = "realtek,rtl8365mb";
-		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
-		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-		realtek,disable-leds;
-		dsa,member = <1 0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan5";
-				phy-handle = <&ethphy0>;
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan6";
-				phy-handle = <&ethphy1>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan7";
-				phy-handle = <&ethphy2>;
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan8";
-				phy-handle = <&ethphy3>;
-			};
-
-			port@6 {
-				reg = <6>;
-				label = "cpu";
-				ethernet = <&sw0_p5>;
-				phy-mode = "rgmii";
-				tx-internal-delay-ps = <2000>;
-				rx-internal-delay-ps = <2100>;
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-					pause;
-				};
-			};
-		};
-
-		mdio {
-			compatible = "realtek,smi-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ethphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-
-			ethphy2: ethernet-phy@2 {
-				reg = <2>;
-			};
-
-			ethphy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-		};
-	};
-};
-
-&srab {
-	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-	status = "okay";
-	dsa,member = <0 0>;
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan4";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan3";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan1";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		sw0_p5: port@5 {
-			reg = <5>;
-			label = "extsw";
-			phy-mode = "rgmii";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-				pause;
-			};
-		};
-
-		port@7 {
-			reg = <7>;
-			ethernet = <&gmac1>;
-			label = "cpu";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		port@8 {
-			reg = <8>;
-			ethernet = <&gmac2>;
-			label = "cpu";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
-
-&gmac0 {
-	status = "disabled";
-};
-
-&gmac1 {
-	nvmem-cells = <&et1macaddr>;
-	nvmem-cell-names = "mac-address";
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&nandcs {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-
-		partition@80000 {
-			label = "nvram";
-			reg = <0x00080000 0x00180000>;
-		};
-
-		partition@200000 {
-			label = "firmware";
-			reg = <0x00200000 0x07e00000>;
-			compatible = "brcm,trx";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
deleted file mode 100644
index 555fbe41dd8fe..0000000000000
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for D-Link DIR-885L
- *
- * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch1.dtsi"
-
-/ {
-	compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
-	model = "D-Link DIR-885L";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	nand_controller: nand-controller@18028000 {
-		nand@0 {
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "firmware";
-					reg = <0x00000000 0x08000000>;
-				};
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-wan-white {
-			label = "bcm53xx:white:wan";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		led-power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		led-wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb3-white {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-2ghz {
-			label = "bcm53xx:white:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led-5ghz {
-			label = "bcm53xx:white:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Switch: router / extender */
-		button-extender {
-			label = "Extender";
-			linux,code = <BTN_0>;
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan4";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan3";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan1";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@8 {
-			reg = <8>;
-			label = "cpu";
-			ethernet = <&gmac2>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
deleted file mode 100644
index d945a20b06e07..0000000000000
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
+++ /dev/null
@@ -1,211 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device tree for D-Link DIR-890L
- * D-Link calls this board "WRGAC36"
- * this router has the same looks and form factor as D-Link DIR-885L.
- *
- * Some differences from DIR-885L include a separate USB2 port, separate LEDs
- * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
- * router/extender switch is mounted (there is an empty mount point on the
- * PCB) so this device is a pure router. Also the LAN ports are in the right
- * order.
- *
- * Based on the device tree for DIR-885L
- * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
- * Copyright (C) 2022 Linus Walleij
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch1.dtsi"
-
-/ {
-	compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
-	model = "D-Link DIR-890L";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	leds {
-		/*
-		 * LED information is derived from the boot log which
-		 * conveniently lists all the LEDs.
-		 */
-		compatible = "gpio-leds";
-
-		led-power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-wan-white {
-			label = "bcm53xx:white:wan";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		led-power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		led-wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb3-white {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-usb2-white {
-			label = "bcm53xx:white:usb2";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-2ghz {
-			label = "bcm53xx:white:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led-5ghz {
-			label = "bcm53xx:white:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Called "factory reset" in the vendor dmesg */
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	/*
-	 * The flash memory is memory mapped at 0x1e000000-0x1fffffff
-	 * 64KB blocks; total size 2MB, same that can be
-	 * found attached to the spi_nor SPI controller.
-	 */
-	nvram@1e1f0000 {
-		compatible = "brcm,nvram";
-		reg = <0x1e1f0000 0x00010000>;
-
-		et0macaddr: et0macaddr {
-		};
-	};
-};
-
-&gmac2 {
-	/*
-	 * The NVRAM curiously does not contain a MAC address
-	 * for et2 so since that is the only ethernet interface
-	 * actually in use on the platform, we use this et0 MAC
-	 * address for et2.
-	 */
-	nvmem-cells = <&et0macaddr>;
-	nvmem-cell-names = "mac-address";
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&nandcs {
-	/* Spansion S34ML01G2, 128MB with 128KB erase blocks */
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/*
-		 * This is called "nflash" in the vendor kernel with
-		 * "upgrade" and "rootfs" (probably using OpenWrt
-		 * splitpart). We call it "firmware" like standard tools
-		 * assume. The CFE loader contains incorrect information
-		 * about TRX partitions, ignore this, there are no TRX
-		 * partitions: this device uses SEAMA.
-		 */
-		firmware@0 {
-			label = "firmware";
-			reg = <0x00000000 0x08000000>;
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3 {
-	vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan1";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan2";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan3";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan4";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@8 {
-			reg = <8>;
-			label = "cpu";
-			ethernet = <&gmac2>;
-			phy-mode = "rgmii";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
deleted file mode 100644
index d9a16a820e7f9..0000000000000
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ /dev/null
@@ -1,318 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Linksys EA9500";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	nvram@1c080000 {
-		compatible = "brcm,nvram";
-		reg = <0x1c080000 0x100000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		button-rfkill {
-				label = "WiFi";
-				linux,code = <KEY_RFKILL>;
-				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-		};
-
-		button-reset {
-				label = "Reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-wps {
-			label = "bcm53xx:white:wps";
-			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb2 {
-			label = "bcm53xx:green:usb2";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port2>, <&ehci_port2>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-usb3 {
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-power {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-wifi-disabled {
-			label = "bcm53xx:amber:wifi-disabled";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-		};
-
-		led-wifi-enabled {
-			label = "bcm53xx:white:wifi-enabled";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-bluebar1 {
-			label = "bcm53xx:white:bluebar1";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-bluebar2 {
-			label = "bcm53xx:white:bluebar2";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-bluebar3 {
-			label = "bcm53xx:white:bluebar3";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-		};
-
-		led-bluebar4 {
-			label = "bcm53xx:white:bluebar4";
-			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-bluebar5 {
-			label = "bcm53xx:white:bluebar5";
-			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-bluebar6 {
-			label = "bcm53xx:white:bluebar6";
-			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-bluebar7 {
-			label = "bcm53xx:white:bluebar7";
-			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-bluebar8 {
-			label = "bcm53xx:white:bluebar8";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	mdio-mux@18003000 {
-
-		/* BIT(9) = 1 => external mdio */
-		mdio@200 {
-			reg = <0x200>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switch@0  {
-				compatible = "brcm,bcm53125";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-				reset-names = "robo_reset";
-				reg = <0>;
-				dsa,member = <1 0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinmux_mdio>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						label = "lan1";
-					};
-
-					port@1 {
-						reg = <1>;
-						label = "lan5";
-					};
-
-					port@2 {
-						reg = <2>;
-						label = "lan2";
-					};
-
-					port@3 {
-						reg = <3>;
-						label = "lan6";
-					};
-
-					port@4 {
-						reg = <4>;
-						label = "lan3";
-					};
-
-					sw1_p8: port@8 {
-						reg = <8>;
-						ethernet = <&sw0_p0>;
-						label = "cpu";
-
-						fixed-link {
-							speed = <1000>;
-							full-duplex;
-						};
-					};
-				};
-			};
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-};
-
-&srab {
-	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-	status = "okay";
-	dsa,member = <0 0>;
-
-	ports {
-		port@1 {
-			reg = <1>;
-			label = "lan7";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan4";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan8";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@5 {
-			reg = <5>;
-			ethernet = <&gmac0>;
-			label = "cpu";
-			status = "disabled";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		port@7 {
-			reg = <7>;
-			ethernet = <&gmac1>;
-			label = "cpu";
-			status = "disabled";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		port@8 {
-			reg = <8>;
-			ethernet = <&gmac2>;
-			label = "cpu";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		sw0_p0: port@0 {
-			reg = <0>;
-			label = "extsw";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&nandcs {
-	partitions {
-		compatible = "linksys,ns-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x0000000 0x0080000>;
-			read-only;
-		};
-
-		partition@80000 {
-			label = "nvram";
-			reg = <0x080000 0x0100000>;
-		};
-
-		partition@180000{
-			label = "devinfo";
-			reg = <0x0180000 0x080000>;
-		};
-
-		partition@200000 {
-			reg = <0x0200000 0x01d00000>;
-			compatible = "linksys,ns-firmware", "brcm,trx";
-		};
-
-		partition@1f00000 {
-			reg = <0x01f00000 0x01d00000>;
-			compatible = "linksys,ns-firmware", "brcm,trx";
-		};
-
-		partition@5200000 {
-			label = "system";
-			reg = <0x05200000 0x02e00000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
deleted file mode 100644
index 41a0722fa64a6..0000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ /dev/null
@@ -1,107 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul ABR-4500 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	nvram@1eff0000 {
-		compatible = "brcm,nvram";
-		reg = <0x1eff0000 0x10000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		led-usb3 {
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-				<&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "wan";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan4";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan3";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan2";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "lan1";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
deleted file mode 100644
index c56c7e366848b..0000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-
-/ {
-	compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XAP-1610 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		led-2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led-5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "poe";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
deleted file mode 100644
index 1b5c91a524ac9..0000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ /dev/null
@@ -1,107 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XBR-4500 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	nvram@1eff0000 {
-		compatible = "brcm,nvram";
-		reg = <0x1eff0000 0x10000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-		};
-
-		led-usb3 {
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-				<&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "wan";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan4";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan3";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan2";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "lan1";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
deleted file mode 100644
index 739063b77b1f6..0000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2019 Legrand AV Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XWC-2000 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
deleted file mode 100644
index 7afc68d5d2c20..0000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2016 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch4.dtsi"
-
-/ {
-	compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XWR-3100 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	nvram@1eff0000 {
-		compatible = "brcm,nvram";
-		reg = <0x1eff0000 0x10000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power {
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-lan3 {
-			label = "bcm53xx:green:lan3";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		led-lan4 {
-			label = "bcm53xx:green:lan4";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		led-wan {
-			label = "bcm53xx:green:wan";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		led-lan1 {
-			label = "bcm53xx:green:lan1";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		led-lan2 {
-			label = "bcm53xx:green:lan2";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb3 {
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		led-2ghz {
-			label = "bcm53xx:green:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led-5ghz {
-			label = "bcm53xx:green:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan4";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan3";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan1";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
deleted file mode 100644
index 60a2c441d5bda..0000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XWR-3150 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	nvram@1eff0000 {
-		compatible = "brcm,nvram";
-		reg = <0x1eff0000 0x10000>;
-
-		et0macaddr: et0macaddr {
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power {
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-usb3 {
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		led-2ghz {
-			label = "bcm53xx:green:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led-5ghz {
-			label = "bcm53xx:green:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&gmac0 {
-	nvmem-cells = <&et0macaddr>;
-	nvmem-cell-names = "mac-address";
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan4";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan3";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan1";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
deleted file mode 100644
index 76d562610654a..0000000000000
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "netgear,r8500", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Netgear R8500";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power0 {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-power1 {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		led-5ghz-1 {
-			label = "bcm53xx:white:5ghz-1";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-
-		led-5ghz-2 {
-			label = "bcm53xx:white:5ghz-2";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-		};
-
-		led-2ghz {
-			label = "bcm53xx:white:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb2 {
-			label = "bcm53xx:white:usb2";
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb3 {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-brightness {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-
-		button-rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
deleted file mode 100644
index 3bf6e24978ac2..0000000000000
--- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Hamster Tian <haotia@gmail.com>
- * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch4.dtsi"
-
-/ {
-	compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Phicomm K3";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&nandcs {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x0000000 0x0080000>;
-			read-only;
-		};
-
-		partition@80000 {
-			label = "nvram";
-			reg = <0x0080000 0x0100000>;
-		};
-
-		partition@180000{
-			label = "phicomm";
-			reg = <0x0180000 0x0280000>;
-			read-only;
-		};
-
-		partition@400000 {
-			label = "firmware";
-			reg = <0x0400000 0x7C00000>;
-			compatible = "brcm,trx";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
deleted file mode 100644
index 6282363313e18..0000000000000
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- */
-
-#include "bcm4708.dtsi"
-
-/ {
-};
-
-&pinctrl {
-	compatible = "brcm,bcm4709-pinmux";
-
-	pinmux_mdio: mdio-pins {
-		groups = "mdio_grp";
-		function = "mdio";
-	};
-};
-
-&usb3_phy {
-	compatible = "brcm,ns-bx-usb3-phy";
-};
-
-&uart0 {
-	clock-frequency = <125000000>;
-	status = "okay";
-};
-
-&srab {
-	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
deleted file mode 100644
index 0734aa249b8e0..0000000000000
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm53573.dtsi"
-
-/ {
-	compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
-	model = "Luxul XAP-1440 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-wlan {
-			label = "bcm53xx:blue:wlan";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
-		};
-
-		led-system {
-			label = "bcm53xx:green:system";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
deleted file mode 100644
index e6fb6cbe69633..0000000000000
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm53573.dtsi"
-
-/ {
-	compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
-	model = "Luxul XAP-810 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds-0 {
-		compatible = "gpio-leds";
-
-		led-5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-
-		led-system {
-			label = "bcm53xx:green:system";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	leds-1 {
-		compatible = "gpio-leds";
-
-		led-2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pcie0 {
-	ranges = <0x00000000 0 0 0 0 0x00100000>;
-	#address-cells = <3>;
-	#size-cells = <2>;
-
-	bridge@0,0,0 {
-		reg = <0x0000 0 0 0 0>;
-		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		wifi@0,1,0 {
-			reg = <0x0000 0 0 0 0>;
-			ranges = <0x00000000 0 0 0 0x00100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			pcie0_chipcommon: chipcommon@0 {
-				reg = <0 0x1000>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
deleted file mode 100644
index dab2e5f63a727..0000000000000
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- */
-
-/dts-v1/;
-
-#include "bcm53573.dtsi"
-
-/ {
-	compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573";
-	model = "Tenda AC9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds-0 {
-		compatible = "gpio-leds";
-
-		led-usb {
-			label = "bcm53xx:blue:usb";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led-wps {
-			label = "bcm53xx:blue:wps";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-system {
-			label = "bcm53xx:blue:system";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	leds-1 {
-		compatible = "gpio-leds";
-
-		led-2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pcie0 {
-	ranges = <0x00000000 0 0 0 0 0x00100000>;
-	#address-cells = <3>;
-	#size-cells = <2>;
-
-	bridge@0,0,0 {
-		reg = <0x0000 0 0 0 0>;
-		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		wifi@0,1,0 {
-			reg = <0x0000 0 0 0 0>;
-			ranges = <0x00000000 0 0 0 0x00100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			pcie0_chipcommon: chipcommon@0 {
-				reg = <0 0x1000>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-	};
-};
-
-&switch {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "wan";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan1";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan3";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "lan4";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi
deleted file mode 100644
index cd25ed2757b70..0000000000000
--- a/arch/arm/boot/dts/bcm47622.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "brcm,bcm47622", "brcm,bcmbca";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CA7_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x3>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		L2_0: l2-cache0 {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&CA7_0>, <&CA7_1>,
-			<&CA7_2>, <&CA7_3>;
-	};
-
-	clocks: clocks {
-		periph_clk: periph-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-
-		uart_clk: uart-clk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clocks = <&periph_clk>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		hsspi_pll: hsspi-pll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	axi@81000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x81000000 0x8000>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>,
-				<0x4000 0x2000>,
-				<0x6000 0x2000>;
-		};
-	};
-
-	bus@ff800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xff800000 0x800000>;
-
-		hsspi: spi@1000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0";
-			reg = <0x1000 0x600>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&hsspi_pll &hsspi_pll>;
-			clock-names = "hsspi", "pll";
-			num-cs = <8>;
-			status = "disabled";
-		};
-
-		uart0: serial@12000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_clk>, <&uart_clk>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
deleted file mode 100644
index 14f58033efeb9..0000000000000
--- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Meraki MR26 / Codename: Venom
- *
- * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-#include <dt-bindings/leds/common.h>
-
-/ {
-	compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
-	model = "Meraki MR26";
-
-	memory@0 {
-		reg = <0x00000000 0x08000000>;
-		device_type = "memory";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			function = LED_FUNCTION_FAULT;
-			color = <LED_COLOR_ID_AMBER>;
-			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-			panic-indicator;
-		};
-		led-1 {
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_WHITE>;
-			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		key-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&uart0 {
-	clock-frequency = <50000000>;
-	/delete-property/ clocks;
-};
-
-&uart1 {
-	status = "disabled";
-};
-
-&gmac0 {
-	status = "okay";
-};
-
-&gmac1 {
-	status = "disabled";
-};
-&gmac2 {
-	status = "disabled";
-};
-&gmac3 {
-	status = "disabled";
-};
-
-&nandcs {
-	nand-ecc-algo = "hw";
-
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x200000>;
-			read-only;
-		};
-
-		partition@200000 {
-			label = "u-boot-env";
-			reg = <0x200000 0x200000>;
-			/* empty */
-		};
-
-		partition@400000 {
-			label = "u-boot-backup";
-			reg = <0x400000 0x200000>;
-			/* empty */
-		};
-
-		partition@600000 {
-			label = "u-boot-env-backup";
-			reg = <0x600000 0x200000>;
-			/* empty */
-		};
-
-		partition@800000 {
-			label = "ubi";
-			reg = <0x800000 0x7780000>;
-		};
-	};
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "poe";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-
-			fixed-link {
-				speed = <1000>;
-				duplex-full;
-			};
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinmux_i2c>;
-
-	clock-frequency = <100000>;
-
-	ina219@40 {
-		compatible = "ti,ina219"; /* PoE power */
-		reg = <0x40>;
-		shunt-resistor = <60000>; /* = 60 mOhms */
-	};
-
-	eeprom@56 {
-		compatible = "atmel,24c64";
-		reg = <0x56>;
-		pagesize = <32>;
-		read-only;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* it's empty */
-	};
-};
-
-&thermal {
-	status = "disabled";
-	/* does not work, reads 418 degree Celsius */
-};
diff --git a/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
deleted file mode 100644
index c1f54391746fa..0000000000000
--- a/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "D-Link DWL-8610AP";
-	compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
-
-	memory@0 {
-		device_type = "memory";
-		/* 512 MB RAM in 2 x Macronix D9PSH chips */
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power {
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		led-diag {
-			/* Actually "diag" unclear what this means */
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-wlan-2g {
-			function = LED_FUNCTION_WLAN;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		led-wlan-5g {
-			function = LED_FUNCTION_WLAN;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-reset {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_RESTART>;
-			label = "reset";
-			/* This GPIO is actually stored in NVRAM, but it's not gonna change */
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	/*
-	 * Flash memory at 0x1e000000-0x1fffffff
-	 * Macronix 32 64KB blocks; total size 2MB, same that can be
-	 * found attached to the spi_nor SPI controller.
-	 */
-	nvram@1e080000 {
-		compatible = "brcm,nvram";
-		reg = <0x1e080000 0x00020000>;
-
-		et0macaddr: et0macaddr {
-		};
-
-		et1macaddr: et1macaddr {
-		};
-	};
-};
-
-&gmac0 {
-	nvmem-cells = <&et0macaddr>;
-	nvmem-cell-names = "mac-address";
-};
-
-&gmac1 {
-	nvmem-cells = <&et1macaddr>;
-	nvmem-cell-names = "mac-address";
-};
-
-&spi_nor {
-	/* Serial SPI NOR Flash MX 25L1606E */
-	status = "okay";
-};
-
-&nandcs {
-	/*
-	 * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
-	 *
-	 * This ECC is a bit unorthodox but it is what the stock firmware
-	 * is using, so to be able to mount the original partitions
-	 * this is necessary.
-	 */
-	nand-ecc-strength = <5>;
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* This is named nflash1.trx in CFE */
-		trx@0 {
-			label = "firmware";
-			reg = <0x00000000 0x02800000>;
-			compatible = "brcm,trx";
-		};
-
-		/* This is named nflash1.trx2 in CFE */
-		trx2@2800000 {
-			label = "firmware2";
-			reg = <0x02800000 0x02800000>;
-			compatible = "brcm,trx";
-		};
-
-		/* This is named nflash1.rwfs in CFE */
-		free@5000000 {
-			label = "free";
-			reg = <0x05000000 0x03000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
deleted file mode 100644
index 46c2c93b01d88..0000000000000
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ /dev/null
@@ -1,222 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Meraki MR32 / Codename: Espresso
- *
- * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-#include <dt-bindings/leds/common.h>
-
-/ {
-	compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708";
-	model = "Meraki MR32";
-
-	chosen {
-		bootargs = " console=ttyS0,115200n8 earlycon";
-	};
-
-	memory@0 {
-		reg = <0x00000000 0x08000000>;
-		device_type = "memory";
-	};
-
-	aliases {
-		serial1 = &uart2;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		sysled3 {
-			function = LED_FUNCTION_FAULT;
-			color = <LED_COLOR_ID_AMBER>;
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-			panic-indicator;
-		};
-		sysled2 {
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_WHITE>;
-			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	pwm-leds {
-		compatible = "pwm-leds";
-
-		led-0 {
-			/* SYS-LED 1 - Tricolor */
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_RED>;
-			pwms = <&pwm 0 50000 0>;
-			max-brightness = <255>;
-		};
-
-		led-1 {
-			/* SYS-LED 1 - Tricolor */
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_GREEN>;
-			pwms = <&pwm 1 50000 0>;
-			max-brightness = <255>;
-		};
-
-		led-2 {
-			/* SYS-LED 1 - Tricolor */
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_BLUE>;
-			pwms = <&pwm 2 50000 0>;
-			max-brightness = <255>;
-		};
-	};
-};
-
-&uart0 {
-	clock-frequency = <62500000>;
-	/delete-property/ clocks;
-};
-
-&uart1 {
-	status = "disabled";
-};
-
-&uart2 {
-	status = "okay";
-	/*
-	 * bluetooth-le {
-	 *	compatible = "brcm,bcm20732";
-	 *	enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
-	 *};
-	 */
-};
-
-&gmac0 {
-	nvmem-cell-names = "mac-address";
-	nvmem-cells = <&mac_address>;
-};
-
-&gmac1 {
-	status = "disabled";
-};
-&gmac2 {
-	status = "disabled";
-};
-&gmac3 {
-	status = "disabled";
-};
-
-&pwm {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinmux_pwm>;
-};
-
-&nandcs {
-	nand-ecc-algo = "hw";
-
-	partitions {
-		/*
-		 * The partition autodetection does not work for this device.
-		 * It will only detect the "nvram" partition with an incorrect size.
-		 *	[    1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0
-		 *	[    1.727962] Creating 1 MTD partitions on "brcmnand.0":
-		 *	[    1.733117] 0x000000400000-0x000008000000 : "nvram"
-		 */
-
-		compatible = "fixed-partitions";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-
-		partition0@0 {
-			label = "u-boot";
-			reg = <0x0 0x100000>;
-			read-only;
-		};
-
-		partition1@100000 {
-			label = "bootkernel1";
-			reg = <0x100000 0x300000>;
-			read-only;
-		};
-
-		partition2@400000 {
-			label = "nvram";
-			reg = <0x400000 0x100000>;
-			read-only;
-		};
-
-		partition3@500000 {
-			label = "bootkernel2";
-			reg = <0x500000 0x300000>;
-			read-only;
-		};
-
-		partition4@800000 {
-			label = "ubi";
-			reg = <0x800000 0x7780000>;
-		};
-	};
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "poe";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-
-			fixed-link {
-				speed = <1000>;
-				duplex-full;
-			};
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinmux_i2c>;
-
-	clock-frequency = <100000>;
-
-	current_sense: ina219@45 {
-		compatible = "ti,ina219";
-		reg = <0x45>;
-		shunt-resistor = <60000>; /* = 60 mOhms */
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-		read-only;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		mac_address: mac-address@66 {
-			reg = <0x66 0x6>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
deleted file mode 100644
index c349e8f0afc57..0000000000000
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom Northstar NAND.
- *
- * Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
- */
-
-#include "bcm5301x-nand-cs0.dtsi"
-
-&nandcs {
-	nand-ecc-algo = "bch";
-	nand-ecc-strength = <1>;
-	nand-ecc-step-size = <512>;
-};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
deleted file mode 100644
index 18e25e302b132..0000000000000
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
+++ /dev/null
@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2016 Luxul Inc.
- */
-
-#include "bcm5301x-nand-cs0.dtsi"
-
-&nandcs {
-	nand-ecc-algo = "bch";
-	nand-ecc-strength = <4>;
-	nand-ecc-step-size = <512>;
-};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
deleted file mode 100644
index c8e56d30bd6f5..0000000000000
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X Nand chip defaults.
- *
- * This should be included if the NAND controller is on chip select 0
- * and uses 8 bit ECC.
- *
- * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
- */
-
-#include "bcm5301x-nand-cs0.dtsi"
-
-&nandcs {
-	nand-ecc-algo = "bch";
-	nand-ecc-strength = <8>;
-	nand-ecc-step-size = <512>;
-};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
deleted file mode 100644
index be9a00ff752d9..0000000000000
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom Northstar NAND.
- *
- * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
- */
-
-/ {
-	nand-controller@18028000 {
-		nandcs: nand@0 {
-			compatible = "brcm,nandcs";
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partitions {
-				compatible = "brcm,bcm947xx-cfe-partitions";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
deleted file mode 100644
index 5fc1b847f4aa5..0000000000000
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ /dev/null
@@ -1,581 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
- * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
- *
- * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-#include <dt-bindings/clock/bcm-nsp.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	chipcommon-a-bus@18000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x00001000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uart0: serial@300 {
-			compatible = "ns16550";
-			reg = <0x0300 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			status = "disabled";
-		};
-
-		uart1: serial@400 {
-			compatible = "ns16550";
-			reg = <0x0400 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinmux_uart1>;
-			status = "disabled";
-		};
-	};
-
-	mpcore-bus@19000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x19000000 0x00023000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		a9pll: arm_clk@0 {
-			#clock-cells = <0>;
-			compatible = "brcm,nsp-armpll";
-			clocks = <&osc>;
-			reg = <0x00000 0x1000>;
-		};
-
-		scu@20000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x20000 0x100>;
-		};
-
-		timer@20200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&periph_clk>;
-		};
-
-		timer@20600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x20600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		watchdog@20620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x20620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		gic: interrupt-controller@21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x21000 0x1000>,
-			      <0x20100 0x100>;
-		};
-
-		L2: cache-controller@22000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x22000 0x1000>;
-			cache-unified;
-			arm,shared-override;
-			prefetch-data = <1>;
-			prefetch-instr = <1>;
-			cache-level = <2>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts =
-			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-		};
-
-		iprocmed: iprocmed {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		iprocslow: iprocslow {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&a9pll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-	};
-
-	axi@18000000 {
-		compatible = "brcm,bus-axi";
-		reg = <0x18000000 0x1000>;
-		ranges = <0x00000000 0x18000000 0x00100000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0x000fffff 0xffff>;
-		interrupt-map = 
-			/* ChipCommon */
-			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Switch Register Access Block */
-			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 0 */
-			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 1 */
-			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 2 */
-			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* USB 2.0 Controller */
-			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* USB 3.0 Controller */
-			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 0 */
-			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 1 */
-			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 2 */
-			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 3 */
-			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* NAND Controller */
-			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-		chipcommon: chipcommon@0 {
-			reg = <0x00000000 0x1000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pcie0: pcie@12000 {
-			reg = <0x00012000 0x1000>;
-		};
-
-		pcie1: pcie@13000 {
-			reg = <0x00013000 0x1000>;
-		};
-
-		pcie2: pcie@14000 {
-			reg = <0x00014000 0x1000>;
-		};
-
-		usb2: usb2@21000 {
-			reg = <0x00021000 0x1000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			interrupt-parent = <&gic>;
-
-			ehci: usb@21000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-ehci";
-				reg = <0x00021000 0x1000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ehci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				ehci_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-
-			ohci: usb@22000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-ohci";
-				reg = <0x00022000 0x1000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ohci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				ohci_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		usb3: usb3@23000 {
-			reg = <0x00023000 0x1000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			interrupt-parent = <&gic>;
-
-			xhci: usb@23000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-xhci";
-				reg = <0x00023000 0x1000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb3_phy>;
-				phy-names = "usb";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				xhci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		gmac0: ethernet@24000 {
-			reg = <0x24000 0x800>;
-		};
-
-		gmac1: ethernet@25000 {
-			reg = <0x25000 0x800>;
-		};
-
-		gmac2: ethernet@26000 {
-			reg = <0x26000 0x800>;
-		};
-
-		gmac3: ethernet@27000 {
-			reg = <0x27000 0x800>;
-		};
-	};
-
-	pwm: pwm@18002000 {
-		compatible = "brcm,iproc-pwm";
-		reg = <0x18002000 0x28>;
-		clocks = <&osc>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	mdio: mdio@18003000 {
-		compatible = "brcm,iproc-mdio";
-		reg = <0x18003000 0x8>;
-		#size-cells = <0>;
-		#address-cells = <1>;
-	};
-
-	mdio-mux@18003000 {
-		compatible = "mdio-mux-mmioreg", "mdio-mux";
-		mdio-parent-bus = <&mdio>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x18003000 0x4>;
-		mux-mask = <0x200>;
-
-		mdio@0 {
-			reg = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			usb3_phy: usb3-phy@10 {
-				compatible = "brcm,ns-ax-usb3-phy";
-				reg = <0x10>;
-				usb3-dmp-syscon = <&usb3_dmp>;
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-	};
-
-	usb3_dmp: syscon@18105000 {
-		reg = <0x18105000 0x1000>;
-	};
-
-	uart2: serial@18008000 {
-		compatible = "ns16550a";
-		reg = <0x18008000 0x20>;
-		clocks = <&iprocslow>;
-		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		status = "disabled";
-	};
-
-	i2c0: i2c@18009000 {
-		compatible = "brcm,iproc-i2c";
-		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
-
-	dmu-bus@1800c000 {
-		compatible = "simple-bus";
-		ranges = <0 0x1800c000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		cru-bus@100 {
-			compatible = "brcm,ns-cru", "simple-mfd";
-			reg = <0x100 0x1a4>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			lcpll0: clock-controller@100 {
-				#clock-cells = <1>;
-				compatible = "brcm,nsp-lcpll0";
-				reg = <0x100 0x14>;
-				clocks = <&osc>;
-				clock-output-names = "lcpll0", "pcie_phy",
-						     "sdio", "ddr_phy";
-			};
-
-			genpll: clock-controller@140 {
-				#clock-cells = <1>;
-				compatible = "brcm,nsp-genpll";
-				reg = <0x140 0x24>;
-				clocks = <&osc>;
-				clock-output-names = "genpll", "phy",
-						     "ethernetclk",
-						     "usbclk", "iprocfast",
-						     "sata1", "sata2";
-			};
-
-			usb2_phy: phy@164 {
-				compatible = "brcm,ns-usb2-phy";
-				reg = <0x164 0x4>;
-				brcm,syscon-clkset = <&cru_clkset>;
-				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-				clock-names = "phy-ref-clk";
-				#phy-cells = <0>;
-			};
-
-			cru_clkset: syscon@180 {
-				compatible = "brcm,cru-clkset", "syscon";
-				reg = <0x180 0x4>;
-			};
-
-			pinctrl: pinctrl@1c0 {
-				compatible = "brcm,bcm4708-pinmux";
-				reg = <0x1c0 0x24>;
-				reg-names = "cru_gpio_control";
-
-				spi-pins {
-					groups = "spi_grp";
-					function = "spi";
-				};
-
-				pinmux_i2c: i2c-pins {
-					groups = "i2c_grp";
-					function = "i2c";
-				};
-
-				pinmux_pwm: pwm-pins {
-					groups = "pwm0_grp", "pwm1_grp",
-						 "pwm2_grp", "pwm3_grp";
-					function = "pwm";
-				};
-
-				pinmux_uart1: uart1-pins {
-					groups = "uart1_grp";
-					function = "uart1";
-				};
-			};
-
-			thermal: thermal@2c0 {
-				compatible = "brcm,ns-thermal";
-				reg = <0x2c0 0x10>;
-				#thermal-sensor-cells = <0>;
-			};
-		};
-	};
-
-	srab: ethernet-switch@18007000 {
-		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
-		reg = <0x18007000 0x1000>;
-
-		status = "disabled";
-
-		/* ports are defined in board DTS */
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	rng: rng@18004000 {
-		compatible = "brcm,bcm5301x-rng";
-		reg = <0x18004000 0x14>;
-	};
-
-	nand_controller: nand-controller@18028000 {
-		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
-		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
-		reg-names = "nand", "iproc-idm", "iproc-ext";
-		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		brcm,nand-has-wp;
-	};
-
-	spi@18029200 {
-		compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
-		reg = <0x18029200 0x184>,
-		      <0x18029000 0x124>,
-		      <0x1811b408 0x004>,
-		      <0x180293a0 0x01c>;
-		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "mspi_done",
-				  "mspi_halted",
-				  "spi_lr_fullness_reached",
-				  "spi_lr_session_aborted",
-				  "spi_lr_impatient",
-				  "spi_lr_session_done",
-				  "spi_lr_overread";
-		clocks = <&iprocmed>;
-		clock-names = "iprocmed";
-		num-cs = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		spi_nor: flash@0 {
-			compatible = "jedec,spi-nor";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-			status = "disabled";
-
-			partitions {
-				compatible = "brcm,bcm947xx-cfe-partitions";
-			};
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <1000>;
-			coefficients = <(-556) 418000>;
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature = <125000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
deleted file mode 100644
index 975f854f652ff..0000000000000
--- a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * DTS for Unifi Switch 8 port
- *
- * Copyright (C) 2017 Florian Fainelli <f.fainelli@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-/dts-v1/;
-
-#include "bcm-hr2.dtsi"
-
-/ {
-	compatible = "ubnt,unifi-switch8", "brcm,bcm53342", "brcm,hr2";
-	model = "Ubiquiti UniFi Switch 8 (BCM53342)";
-
-	/* Hurricane 2 designs use the second UART */
-	chosen {
-		bootargs = "console=ttyS1,115200 earlyprintk";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x68000000 0x08000000>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&qspi {
-	status = "okay";
-	bspi-sel = <0>;
-
-	flash: flash@0 {
-		compatible = "m25p80";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <12500000>;
-		spi-cpol;
-		spi-cpha;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0xc0000>;
-		};
-
-		partition@c0000 {
-			label = "u-boot-env";
-			reg = <0xc0000 0x10000>;
-		};
-
-		partition@d0000 {
-			label = "shmoo";
-			reg = <0xd0000 0x10000>;
-		};
-
-		partition@e0000 {
-			label = "kernel0";
-			reg = <0xe0000 0xf00000>;
-		};
-
-		partition@fe0000 {
-			label = "kernel1";
-			reg = <0xfe0000 0xf10000>;
-		};
-
-		partition@1ef0000 {
-			label = "cfg";
-			reg = <0x1ef0000 0x100000>;
-		};
-
-		partition@1ff0000 {
-			label = "EEPROM";
-			reg = <0x1ff0000 0x10000>;
-		};
-	};
-};
-
-&pcie0 {
-	/* Attaches to the internal switch */
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
deleted file mode 100644
index 3f03a381db0f2..0000000000000
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ /dev/null
@@ -1,219 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-		};
-	};
-
-	mpcore@18310000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x18310000 0x00008000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x1000 0x1000>,
-			      <0x2000 0x0100>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		alp: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <40000000>;
-		};
-	};
-
-	axi@18000000 {
-		compatible = "brcm,bus-axi";
-		reg = <0x18000000 0x1000>;
-		ranges = <0x00000000 0x18000000 0x00100000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0x000fffff 0xffff>;
-		interrupt-map =
-			/* ChipCommon */
-			<0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* IEEE 802.11 0 */
-			<0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 0 */
-			<0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* USB 2.0 Controller */
-			<0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 0 */
-			<0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* IEEE 802.11 1 */
-			<0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 1 */
-			<0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-
-		chipcommon: chipcommon@0 {
-			compatible = "simple-bus";
-			reg = <0x00000000 0x1000>;
-			ranges;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			uart0: serial@300 {
-				compatible = "ns16550a";
-				reg = <0x0300 0x100>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&alp>;
-				status = "okay";
-			};
-		};
-
-		pcie0: pcie@2000 {
-			reg = <0x00002000 0x1000>;
-		};
-
-		usb2: usb2@4000 {
-			reg = <0x4000 0x1000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ehci: usb@4000 {
-				compatible = "generic-ehci";
-				reg = <0x4000 0x1000>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ehci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				ehci_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-
-			ohci: usb@d000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-ohci";
-				reg = <0xd000 0x1000>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ohci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				ohci_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		gmac0: ethernet@5000 {
-			reg = <0x5000 0x1000>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switch: switch@1e {
-					compatible = "brcm,bcm53125";
-					reg = <0x1e>;
-
-					status = "disabled";
-
-					/* ports are defined in board DTS */
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-			};
-		};
-
-		gmac1: ethernet@b000 {
-			reg = <0xb000 0x1000>;
-		};
-
-		pmu@12000 {
-			compatible = "simple-mfd", "syscon";
-			reg = <0x00012000 0x00001000>;
-
-			ilp: ilp {
-				compatible = "brcm,bcm53573-ilp";
-				clocks = <&alp>;
-				#clock-cells = <0>;
-				clock-output-names = "ilp";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi
deleted file mode 100644
index a9bb7ad81378d..0000000000000
--- a/arch/arm/boot/dts/bcm59056.dtsi
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-* Copyright 2014 Linaro Limited
-* Author: Matt Porter <mporter@linaro.org>
-*/
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	regulators {
-		rfldo_reg: rfldo {
-		};
-
-		camldo1_reg: camldo1 {
-		};
-
-		camldo2_reg: camldo2 {
-		};
-
-		simldo1_reg: simldo1 {
-		};
-
-		simldo2_reg: simldo2 {
-		};
-
-		sdldo_reg: sdldo {
-		};
-
-		sdxldo_reg: sdxldo {
-		};
-
-		mmcldo1_reg: mmcldo1 {
-		};
-
-		mmcldo2_reg: mmcldo2 {
-		};
-
-		audldo_reg: audldo {
-		};
-
-		micldo_reg: micldo {
-		};
-
-		usbldo_reg: usbldo {
-		};
-
-		vibldo_reg: vibldo {
-		};
-
-		csr_reg: csr {
-		};
-
-		iosr1_reg: iosr1 {
-		};
-
-		iosr2_reg: iosr2 {
-		};
-
-		msr_reg: msr {
-		};
-
-		sdsr1_reg: sdsr1 {
-		};
-
-		sdsr2_reg: sdsr2 {
-		};
-
-		vsr_reg: vsr {
-		};
-
-		gpldo1_reg: gpldo1 {
-		};
-
-		gpldo2_reg: gpldo2 {
-		};
-
-		gpldo3_reg: gpldo3 {
-		};
-
-		gpldo4_reg: gpldo4 {
-		};
-
-		gpldo5_reg: gpldo5 {
-		};
-
-		gpldo6_reg: gpldo6 {
-		};
-
-		vbus_reg: vbus {
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
deleted file mode 100644
index 93281c47c9ba9..0000000000000
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ /dev/null
@@ -1,247 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Broadcom BCM63138 DSL SoCs Device Tree
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "brcm,bcm63138", "brcm,bcmbca";
-	model = "Broadcom BCM963138 Reference Board";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		uart0 = &serial0;
-		uart1 = &serial1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0>;
-			enable-method = "brcm,bcm63138";
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <1>;
-			enable-method = "brcm,bcm63138";
-			resets = <&pmb0 4 1>;
-		};
-	};
-
-	clocks {
-		/* UBUS peripheral clock */
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-			clock-output-names = "periph";
-		};
-
-		/* peripheral clock for system timer */
-		axi_clk: axi_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&armpll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		/* APB bus clock */
-		apb_clk: apb_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&armpll>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		hsspi_pll: hsspi-pll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <400000000>;
-		};
-	};
-
-	/* ARM bus */
-	axi@80000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x80000000 0x784000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		L2: cache-controller@1d000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x1d000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			cache-size = <524288>;
-			cache-sets = <1024>;
-			cache-line-size = <32>;
-			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		scu: scu@1e000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x1e000 0x100>;
-		};
-
-		gic: interrupt-controller@1f000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0x1f000 0x1000
-				0x1e100 0x100>;
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-		};
-
-		global_timer: timer@1e200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x1e200 0x20>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&axi_clk>;
-		};
-
-		local_timer: local-timer@1e600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x1e600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&axi_clk>;
-		};
-
-		twd_watchdog: watchdog@1e620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x1e620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		armpll: armpll@20000 {
-			#clock-cells = <0>;
-			compatible = "brcm,bcm63138-armpll";
-			clocks = <&periph_clk>;
-			reg = <0x20000 0xf00>;
-		};
-
-		pmb0: reset-controller@4800c0 {
-			compatible = "brcm,bcm63138-pmb";
-			reg = <0x4800c0 0x10>;
-			#reset-cells = <2>;
-		};
-
-		pmb1: reset-controller@4800e0 {
-			compatible = "brcm,bcm63138-pmb";
-			reg = <0x4800e0 0x10>;
-			#reset-cells = <2>;
-		};
-
-		ahci: sata@a000 {
-			compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
-			reg-names = "ahci", "top-ctrl";
-			reg = <0xa000 0x9ac>, <0x8040 0x24>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&pmb0 3 1>;
-			reset-names = "ahci";
-			status = "disabled";
-
-			sata0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata_phy0>;
-			};
-		};
-
-		sata_phy: sata-phy@8100 {
-			compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3";
-			reg = <0x8100 0x1e00>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-		};
-	};
-
-	/* Legacy UBUS base */
-	ubus@fffe8000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xfffe8000 0x8100>;
-
-		timer: timer@80 {
-			compatible = "brcm,bcm6328-timer", "syscon";
-			reg = <0x80 0x3c>;
-		};
-
-		serial0: serial@600 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x600 0x1b>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "periph";
-			status = "disabled";
-		};
-
-		serial1: serial@620 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x620 0x1b>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "periph";
-			status = "disabled";
-		};
-
-		hsspi: spi@1000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0";
-			reg = <0x1000 0x600>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&hsspi_pll &hsspi_pll>;
-			clock-names = "hsspi", "pll";
-			num-cs = <8>;
-			status = "disabled";
-		};
-
-		nand_controller: nand-controller@2000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
-			reg = <0x2000 0x600>, <0xf0 0x10>;
-			reg-names = "nand", "nand-int-base";
-			status = "disabled";
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "nand";
-		};
-
-		bootlut: bootlut@8000 {
-			compatible = "brcm,bcm63138-bootlut";
-			reg = <0x8000 0x50>;
-		};
-
-		reboot {
-			compatible = "syscon-reboot";
-			regmap = <&timer>;
-			offset = <0x34>;
-			mask = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi
deleted file mode 100644
index ba7f265db1210..0000000000000
--- a/arch/arm/boot/dts/bcm63148.dtsi
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "brcm,bcm63148", "brcm,bcmbca";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		B15_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "brcm,brahma-b15";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		B15_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "brcm,brahma-b15";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		L2_0: l2-cache0 {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&B15_0>, <&B15_1>;
-	};
-
-	clocks: clocks {
-		periph_clk: periph-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <50000000>;
-		};
-
-		hsspi_pll: hsspi-pll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <400000000>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	axi@80030000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x80030000 0x8000>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>,
-				<0x4000 0x2000>,
-				<0x6000 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
-					IRQ_TYPE_LEVEL_HIGH)>;
-		};
-	};
-
-	bus@ff800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xfffe8000 0x8000>;
-
-		uart0: serial@600 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x600 0x20>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "refclk";
-			status = "disabled";
-		};
-
-		hsspi: spi@1000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0";
-			reg = <0x1000 0x600>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&hsspi_pll &hsspi_pll>;
-			clock-names = "hsspi", "pll";
-			num-cs = <8>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi
deleted file mode 100644
index d8268a1e889bb..0000000000000
--- a/arch/arm/boot/dts/bcm63178.dtsi
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "brcm,bcm63178", "brcm,bcmbca";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CA7_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		L2_0: l2-cache0 {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&CA7_0>, <&CA7_1>,
-			<&CA7_2>;
-	};
-
-	clocks: clocks {
-		periph_clk: periph-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-
-		uart_clk: uart-clk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clocks = <&periph_clk>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		hsspi_pll: hsspi-pll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	axi@81000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x81000000 0x8000>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
-			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>,
-				<0x4000 0x2000>,
-				<0x6000 0x2000>;
-		};
-	};
-
-	bus@ff800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xff800000 0x800000>;
-
-		hsspi: spi@1000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0";
-			reg = <0x1000 0x600>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&hsspi_pll &hsspi_pll>;
-			clock-names = "hsspi", "pll";
-			num-cs = <8>;
-			status = "disabled";
-		};
-
-		uart0: serial@12000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_clk>, <&uart_clk>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi
deleted file mode 100644
index 49ecc1f0c18c5..0000000000000
--- a/arch/arm/boot/dts/bcm6756.dtsi
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "brcm,bcm6756", "brcm,bcmbca";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CA7_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x3>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		L2_0: l2-cache0 {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&CA7_0>, <&CA7_1>,
-			<&CA7_2>, <&CA7_3>;
-	};
-
-	clocks: clocks {
-		periph_clk: periph-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-
-		uart_clk: uart-clk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clocks = <&periph_clk>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		hsspi_pll: hsspi-pll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	axi@81000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x81000000 0x8000>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>,
-				<0x4000 0x2000>,
-				<0x6000 0x2000>;
-		};
-	};
-
-	bus@ff800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xff800000 0x800000>;
-
-		hsspi: spi@1000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
-			reg = <0x1000 0x600>, <0x2610 0x4>;
-			reg-names = "hsspi", "spim-ctrl";
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&hsspi_pll &hsspi_pll>;
-			clock-names = "hsspi", "pll";
-			num-cs = <8>;
-			status = "disabled";
-		};
-
-		uart0: serial@12000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_clk>, <&uart_clk>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi
deleted file mode 100644
index fbc7d3a5dc5f1..0000000000000
--- a/arch/arm/boot/dts/bcm6846.dtsi
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "brcm,bcm6846", "brcm,bcmbca";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CA7_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		L2_0: l2-cache0 {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&CA7_0>, <&CA7_1>;
-	};
-
-	clocks: clocks {
-		periph_clk: periph-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-
-		hsspi_pll: hsspi-pll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <400000000>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	axi@81000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x81000000 0x8000>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>,
-				<0x4000 0x2000>,
-				<0x6000 0x2000>;
-		};
-	};
-
-	bus@ff800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xff800000 0x800000>;
-
-		uart0: serial@640 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x640 0x1b>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "refclk";
-			status = "disabled";
-		};
-
-		hsspi: spi@1000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0";
-			reg = <0x1000 0x600>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&hsspi_pll &hsspi_pll>;
-			clock-names = "hsspi", "pll";
-			num-cs = <8>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi
deleted file mode 100644
index 5e0fe26530f18..0000000000000
--- a/arch/arm/boot/dts/bcm6855.dtsi
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "brcm,bcm6855", "brcm,bcmbca";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CA7_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		L2_0: l2-cache0 {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
-	};
-
-	clocks: clocks {
-		periph_clk: periph-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-
-		uart_clk: uart-clk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clocks = <&periph_clk>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		hsspi_pll: hsspi-pll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	axi@81000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x81000000 0x8000>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
-			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>,
-				<0x4000 0x2000>,
-				<0x6000 0x2000>;
-		};
-	};
-
-	bus@ff800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xff800000 0x800000>;
-
-		hsspi: spi@1000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1";
-			reg = <0x1000 0x600>, <0x2610 0x4>;
-			reg-names = "hsspi", "spim-ctrl";
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&hsspi_pll &hsspi_pll>;
-			clock-names = "hsspi", "pll";
-			num-cs = <8>;
-			status = "disabled";
-		};
-
-		uart0: serial@12000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_clk>, <&uart_clk>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi
deleted file mode 100644
index 96529d3d4dc26..0000000000000
--- a/arch/arm/boot/dts/bcm6878.dtsi
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "brcm,bcm6878", "brcm,bcmbca";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CA7_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		L2_0: l2-cache0 {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&CA7_0>, <&CA7_1>;
-	};
-
-	clocks: clocks {
-		periph_clk: periph-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-
-		uart_clk: uart-clk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clocks = <&periph_clk>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		hsspi_pll: hsspi-pll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	axi@81000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x81000000 0x8000>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>,
-				<0x4000 0x2000>,
-				<0x6000 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
-					IRQ_TYPE_LEVEL_HIGH)>;
-		};
-	};
-
-	bus@ff800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xff800000 0x800000>;
-
-		hsspi: spi@1000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0";
-			reg = <0x1000 0x600>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&hsspi_pll &hsspi_pll>;
-			clock-names = "hsspi", "pll";
-			num-cs = <8>;
-			status = "disabled";
-		};
-
-		uart0: serial@12000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_clk>, <&uart_clk>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
deleted file mode 100644
index f92d2cf859726..0000000000000
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm7445.dtsi"
-
-/ {
-	model = "Broadcom STB (bcm7445), SVMB reference board";
-	compatible = "brcm,bcm7445", "brcm,brcmstb";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00 0x00000000 0x00 0x40000000>,
-		      <0x00 0x40000000 0x00 0x40000000>,
-		      <0x00 0x80000000 0x00 0x40000000>;
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@1 {
-		compatible = "brcm,nandcs";
-		reg = <1>;
-		nand-ecc-step-size = <512>;
-		nand-ecc-strength = <8>;
-		nand-on-flash-bbt;
-
-		#size-cells = <2>;
-		#address-cells = <2>;
-
-		flash1.rootfs0@0 {
-			reg = <0x0 0x0 0x0 0x80000000>;
-		};
-
-		flash1.rootfs1@80000000 {
-			reg = <0x0 0x80000000 0x0 0x80000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
deleted file mode 100644
index 5ac2042515b8f..0000000000000
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ /dev/null
@@ -1,315 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	model = "Broadcom STB (bcm7445)";
-	compatible = "brcm,bcm7445", "brcm,brcmstb";
-	interrupt-parent = <&gic>;
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "brcm,brahma-b15";
-			device_type = "cpu";
-			enable-method = "brcm,brahma-b15";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "brcm,brahma-b15";
-			device_type = "cpu";
-			enable-method = "brcm,brahma-b15";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "brcm,brahma-b15";
-			device_type = "cpu";
-			enable-method = "brcm,brahma-b15";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "brcm,brahma-b15";
-			device_type = "cpu";
-			enable-method = "brcm,brahma-b15";
-			reg = <3>;
-		};
-	};
-
-	gic: interrupt-controller@ffd00000 {
-		compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic";
-		reg = <0x00 0xffd01000 0x00 0x1000>,
-		      <0x00 0xffd02000 0x00 0x2000>,
-		      <0x00 0xffd04000 0x00 0x2000>,
-		      <0x00 0xffd06000 0x00 0x2000>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	rdb@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0 0x00 0xf0000000 0x1000000>;
-
-		serial@40ab00 {
-			compatible = "ns16550a";
-			reg = <0x40ab00 0x20>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <81000000>;
-		};
-
-		sun_top_ctrl: syscon@404000 {
-			compatible = "brcm,bcm7445-sun-top-ctrl",
-				     "syscon";
-			reg = <0x404000 0x51c>;
-		};
-
-		hif_cpubiuctrl: syscon@3e2400 {
-			compatible = "brcm,bcm7445-hif-cpubiuctrl",
-				     "syscon";
-			reg = <0x3e2400 0x5b4>;
-		};
-
-		hif_continuation: syscon@452000 {
-			compatible = "brcm,bcm7445-hif-continuation",
-				     "syscon";
-			reg = <0x452000 0x100>;
-		};
-
-		irq0_intc: interrupt-controller@40a780 {
-			compatible = "brcm,bcm7120-l2-intc";
-			interrupt-parent = <&gic>;
-			#interrupt-cells = <1>;
-			reg = <0x40a780 0x8>;
-			interrupt-controller;
-			interrupts = <GIC_SPI 0x45 0x0>,
-				     <GIC_SPI 0x43 0x0>;
-			brcm,int-map-mask = <0x25c>, <0x7000000>;
-			brcm,int-fwd-mask = <0x70000>;
-		};
-
-		irq0_aon_intc: interrupt-controller@417280 {
-			compatible = "brcm,bcm7120-l2-intc";
-			reg = <0x417280 0x8>;
-			interrupt-parent = <&gic>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			interrupts = <GIC_SPI 0x46 0x0>,
-				     <GIC_SPI 0x44 0x0>,
-				     <GIC_SPI 0x49 0x0>;
-			brcm,int-map-mask = <0x1e3 0x18000000 0x100000>;
-			brcm,int-fwd-mask = <0x0>;
-			brcm,irq-can-wake;
-		};
-
-		hif_intr2_intc: interrupt-controller@3e1000 {
-			compatible = "brcm,l2-intc";
-			reg = <0x3e1000 0x30>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupts = <GIC_SPI 0x20 0x0>;
-			interrupt-parent = <&gic>;
-			interrupt-names = "hif";
-		};
-
-                aon_pm_l2_intc: interrupt-controller@410640 {
-			compatible = "brcm,l2-intc";
-			reg = <0x410640 0x30>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupts = <GIC_SPI 0x40 0x0>;
-			interrupt-parent = <&gic>;
-			brcm,irq-can-wake;
-		};
-
-		aon-ctrl@410000 {
-			compatible = "brcm,brcmstb-aon-ctrl";
-			reg = <0x410000 0x200>, <0x410200 0x400>;
-			reg-names = "aon-ctrl", "aon-sram";
-		};
-
-		nand_controller: nand-controller@3e2800 {
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
-			reg-names = "nand", "flash-dma";
-			reg = <0x3e2800 0x600>, <0x3e3000 0x2c>;
-			interrupt-parent = <&hif_intr2_intc>;
-			interrupts = <24>, <4>;
-			interrupt-names = "nand_ctlrdy", "flash_dma_done";
-		};
-
-		sata@45a000 {
-			compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
-			reg-names = "ahci", "top-ctrl";
-			reg = <0x45a000 0xa9c>, <0x458040 0x24>;
-			interrupts = <GIC_SPI 30 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			sata0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata_phy0>;
-			};
-
-			sata1: sata-port@1 {
-				reg = <1>;
-				phys = <&sata_phy1>;
-			};
-		};
-
-		sata_phy: sata-phy@458100 {
-			compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
-			reg = <0x458100 0x1f00>;
-			reg-names = "phy";
-			#address-cells = <0x1>;
-			#size-cells = <0x0>;
-
-			sata_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-
-			sata_phy1: sata-phy@1 {
-				reg = <1>;
-				#phy-cells = <0>;
-			};
-		};
-
-		upg_gio: gpio@40a700 {
-			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
-			reg = <0x40a700 0x80>;
-			#gpio-cells = <2>;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-			interrupt-parent = <&irq0_intc>;
-			interrupts = <6>;
-			brcm,gpio-bank-widths = <32 32 32 24>;
-		};
-
-		upg_gio_aon: gpio@4172c0 {
-			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
-			reg = <0x4172c0 0x40>;
-			#gpio-cells = <2>;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-			interrupts-extended = <&irq0_aon_intc 0x6>,
-					      <&aon_pm_l2_intc 0x5>;
-			wakeup-source;
-			brcm,gpio-bank-widths = <18 4>;
-		};
-
-	};
-
-	memory_controllers@f1100000 {
-		compatible = "simple-bus";
-		ranges = <0x0 0x0 0xf1100000 0x200000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		memc@0 {
-			compatible = "brcm,brcmstb-memc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x80000>;
-
-			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
-				reg = <0x2000 0x800>;
-			};
-
-			ddr-phy@6000 {
-				compatible = "brcm,brcmstb-ddr-phy-v240.1";
-				reg = <0x6000 0x21c>;
-				};
-
-			shimphy@8000 {
-				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
-				reg = <0x8000 0xe4>;
-			};
-		};
-
-		memc@80000 {
-			compatible = "brcm,brcmstb-memc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x80000 0x80000>;
-
-			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
-				reg = <0x2000 0x800>;
-			};
-
-			ddr-phy@6000 {
-				compatible = "brcm,brcmstb-ddr-phy-v240.1";
-				reg = <0x6000 0x21c>;
-			};
-
-			shimphy@8000 {
-				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
-				reg = <0x8000 0xe4>;
-			};
-		};
-
-		memc@100000 {
-			compatible = "brcm,brcmstb-memc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x100000 0x80000>;
-
-			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
-				reg = <0x2000 0x800>;
-			};
-
-			ddr-phy@6000 {
-				compatible = "brcm,brcmstb-ddr-phy-v240.1";
-				reg = <0x6000 0x21c>;
-			};
-
-			shimphy@8000 {
-				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
-				reg = <0x8000 0xe4>;
-			};
-		};
-	};
-
-	sram@ffe00000 {
-		compatible = "brcm,boot-sram", "mmio-sram";
-		reg = <0x0 0xffe00000 0x0 0x10000>;
-	};
-
-	smpboot {
-		compatible = "brcm,brcmstb-smpboot";
-		syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
-		syscon-cont = <&hif_continuation>;
-	};
-
-	reboot {
-		compatible = "brcm,brcmstb-reboot";
-		syscon = <&sun_top_ctrl 0x304 0x308>;
-	};
-};
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
deleted file mode 100644
index 363009e747b38..0000000000000
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm-cygnus.dtsi"
-#include "dt-bindings/input/input.h"
-
-/ {
-	model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
-	compatible = "brcm,bcm11360", "brcm,cygnus";
-
-	aliases {
-		serial0 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-hook {
-			label = "HOOK";
-			linux,code = <KEY_O>;
-			gpios = <&gpio_asiu 48 0>;
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-};
-
-&mdio {
-	status = "okay";
-};
-
-&switch {
-	status = "okay";
-};
-
-&v3d {
-	assigned-clocks =
-		<&mipipll BCM_CYGNUS_MIPIPLL>,
-		<&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
-	assigned-clock-rates = <525000000>, <300000000>;
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&nand_controller {
-	nand@1 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <24>;
-		nand-ecc-step-size = <1024>;
-
-		brcm,nand-oob-sector-size = <27>;
-	};
-};
diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts
deleted file mode 100644
index 091c73a46e08b..0000000000000
--- a/arch/arm/boot/dts/bcm911360k.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm-cygnus.dtsi"
-
-/ {
-	model = "Cygnus SVK (BCM911360K)";
-	compatible = "brcm,bcm11360", "brcm,cygnus";
-
-	aliases {
-		serial0 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
deleted file mode 100644
index d9eb2040b9631..0000000000000
--- a/arch/arm/boot/dts/bcm94708.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-
-/ {
-	model = "NorthStar SVK (BCM94708)";
-	compatible = "brcm,bcm94708", "brcm,bcm4708";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
deleted file mode 100644
index 618c812eef73e..0000000000000
--- a/arch/arm/boot/dts/bcm94709.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-
-/ {
-	model = "NorthStar SVK (BCM94709)";
-	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
deleted file mode 100644
index 3709baa2376f5..0000000000000
--- a/arch/arm/boot/dts/bcm947189acdbmr.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2017 Broadcom
- * Author: Florian Fainelli <f.fainelli@gmail.com>
- *
- * Licensed under the ISC license.
- */
-
-/dts-v1/;
-
-#include "bcm53573.dtsi"
-
-/ {
-	compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
-	model = "Broadcom BCM947189ACDBMR";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-wps {
-			label = "bcm53xx:blue:wps";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	spi {
-		compatible = "spi-gpio";
-		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 21 0>;
-		gpio-miso = <&chipcommon 22 0>;
-		gpio-mosi = <&chipcommon 23 0>;
-		cs-gpios = <&chipcommon 24 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* External BCM6802 MoCA chip is connected */
-	};
-};
-
-&pcie0 {
-	ranges = <0x00000000 0 0 0 0 0x00100000>;
-	#address-cells = <3>;
-	#size-cells = <2>;
-
-	bridge@0,0,0 {
-		reg = <0x0000 0 0 0 0>;
-		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		wifi@0,1,0 {
-			reg = <0x0000 0 0 0 0>;
-			ranges = <0x00000000 0 0 0 0x00100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-};
diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts
deleted file mode 100644
index 93b8ce22678d3..0000000000000
--- a/arch/arm/boot/dts/bcm947622.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm47622.dtsi"
-
-/ {
-	model = "Broadcom BCM947622 Reference Board";
-	compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&hsspi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
deleted file mode 100644
index 4fe3b36533767..0000000000000
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom. All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	model = "NorthStar Enterprise Router (BCM953012ER)";
-	compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "port0";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "port1";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts
deleted file mode 100644
index b070b69466bd2..0000000000000
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- *  SPDX-License-Identifier: BSD-3-Clause
- *
- *  Copyright(c) 2017 Broadcom
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom nor the names of its contributors
- *      may be used to endorse or promote products derived from this
- *      software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch4.dtsi"
-
-/ {
-	model = "NorthStar HR (BCM953012HR)";
-	compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708";
-
-	aliases {
-		ethernet0 = &gmac0;
-		ethernet1 = &gmac1;
-		ethernet2 = &gmac2;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-};
-
-&nandcs {
-	partition@0 {
-		label = "nboot";
-		reg = <0x00000000 0x00200000>;
-		read-only;
-	};
-	partition@200000 {
-		label = "nenv";
-		reg = <0x00200000 0x00400000>;
-	};
-	partition@600000 {
-		label = "nsystem";
-		reg = <0x00600000 0x00a00000>;
-	};
-	partition@1000000 {
-		label = "nrootfs";
-		reg = <0x01000000 0x07000000>;
-	};
-};
-
-&spi_nor {
-	status = "okay";
-	spi-max-frequency = <62500000>;
-	m25p,default-addr-width = <3>;
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	partition@0 {
-		label = "boot";
-		reg = <0x00000000 0x000d0000>;
-	};
-	partition@d000 {
-		label = "env";
-		reg = <0x000d0000 0x00030000>;
-	};
-	partition@100000 {
-		label = "system";
-		reg = <0x00100000 0x00600000>;
-	};
-	partition@700000 {
-		label = "rootfs";
-		reg = <0x00700000 0x00900000>;
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
deleted file mode 100644
index f1e6bcaa1eddc..0000000000000
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-
-/ {
-	model = "NorthStar SVK (BCM953012K)";
-	compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708";
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-};
-
-&nand_controller {
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partition@0 {
-			label = "nboot";
-			reg = <0x00000000 0x00200000>;
-			read-only;
-		};
-		partition@200000 {
-			label = "nenv";
-			reg = <0x00200000 0x00400000>;
-		};
-		partition@600000 {
-			label = "nsystem";
-			reg = <0x00600000 0x00a00000>;
-		};
-		partition@1000000 {
-			label = "nrootfs";
-			reg = <0x01000000 0x07000000>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-	spi-max-frequency = <62500000>;
-	m25p,default-addr-width = <3>;
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	partition@0 {
-		label = "boot";
-		reg = <0x00000000 0x000d0000>;
-	};
-	partition@d000 {
-		label = "env";
-		reg = <0x000d0000 0x00030000>;
-	};
-	partition@100000 {
-		label = "system";
-		reg = <0x00100000 0x00600000>;
-	};
-	partition@700000 {
-		label = "rootfs";
-		reg = <0x00700000 0x00900000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
deleted file mode 100644
index dda3e11b711f6..0000000000000
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm-cygnus.dtsi"
-#include "bcm9hmidc.dtsi"
-
-/ {
-	model = "Cygnus SVK (BCM958300K)";
-	compatible = "brcm,bcm58300", "brcm,cygnus";
-
-	aliases {
-		serial0 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&nand_controller {
-	nand@1 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <24>;
-		nand-ecc-step-size = <1024>;
-
-		brcm,nand-oob-sector-size = <27>;
-	};
-};
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
deleted file mode 100644
index ea3c6b88b313b..0000000000000
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm-cygnus.dtsi"
-#include "bcm9hmidc.dtsi"
-
-/ {
-	model = "Cygnus Wireless Audio (BCM958305K)";
-	compatible = "brcm,bcm58305", "brcm,cygnus";
-
-	aliases {
-		serial0 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&nand_controller {
-	nand@1 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <24>;
-		nand-ecc-step-size = <1024>;
-
-		brcm,nand-oob-sector-size = <27>;
-	};
-};
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
deleted file mode 100644
index 15f023656df00..0000000000000
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm-nsp.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "NorthStar Plus SVK (BCM958522ER)";
-	compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
-		open-source;
-		priority = <200>;
-	};
-};
-
-/* USB 3 support needed to be complete */
-
-&dma {
-	status = "okay";
-};
-
-&amac0 {
-	status = "okay";
-};
-
-&amac1 {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&nand_controller {
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <24>;
-		nand-ecc-step-size = <1024>;
-
-		brcm,nand-oob-sector-size = <27>;
-
-		partition@0 {
-			label = "nboot";
-			reg = <0x00000000 0x00200000>;
-			read-only;
-		};
-		partition@200000 {
-			label = "nenv";
-			reg = <0x00200000 0x00400000>;
-		};
-		partition@600000 {
-			label = "nsystem";
-			reg = <0x00600000 0x00a00000>;
-		};
-		partition@1000000 {
-			label = "nrootfs";
-			reg = <0x01000000 0x03000000>;
-		};
-		partition@4000000 {
-			label = "ncustfs";
-			reg = <0x04000000 0x3c000000>;
-		};
-	};
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_sel>;
-	nand_sel: nand_sel {
-		function = "nand";
-		groups = "nand_grp";
-	};
-};
-
-&qspi {
-	status = "okay";
-	bspi-sel = <0>;
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p80";
-		reg = <0x0>;
-		spi-max-frequency = <12500000>;
-		m25p,fast-read;
-		spi-cpol;
-		spi-cpha;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x000a0000>;
-		};
-
-		partition@a0000 {
-			label = "env";
-			reg = <0x000a0000 0x00060000>;
-		};
-
-		partition@100000 {
-			label = "system";
-			reg = <0x00100000 0x00600000>;
-		};
-
-		partition@700000 {
-			label = "rootfs";
-			reg = <0x00700000 0x01900000>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&xhci {
-	status = "okay";
-};
-
-&srab {
-	compatible = "brcm,bcm58522-srab", "brcm,nsp-srab";
-};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
deleted file mode 100644
index 9b9c225a1fb39..0000000000000
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm-nsp.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "NorthStar Plus SVK (BCM958525ER)";
-	compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
-		open-source;
-		priority = <200>;
-	};
-};
-
-/* USB 3 support needed to be complete */
-
-&dma {
-	status = "okay";
-};
-
-&amac0 {
-	status = "okay";
-};
-
-&amac1 {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&nand_controller {
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <24>;
-		nand-ecc-step-size = <1024>;
-
-		brcm,nand-oob-sector-size = <27>;
-
-		partition@0 {
-			label = "nboot";
-			reg = <0x00000000 0x00200000>;
-			read-only;
-		};
-		partition@200000 {
-			label = "nenv";
-			reg = <0x00200000 0x00400000>;
-		};
-		partition@600000 {
-			label = "nsystem";
-			reg = <0x00600000 0x00a00000>;
-		};
-		partition@1000000 {
-			label = "nrootfs";
-			reg = <0x01000000 0x03000000>;
-		};
-		partition@4000000 {
-			label = "ncustfs";
-			reg = <0x04000000 0x3c000000>;
-		};
-	};
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_sel>;
-	nand_sel: nand_sel {
-		function = "nand";
-		groups = "nand_grp";
-	};
-};
-
-&qspi {
-	status = "okay";
-	bspi-sel = <0>;
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p80";
-		reg = <0x0>;
-		spi-max-frequency = <12500000>;
-		m25p,fast-read;
-		spi-cpol;
-		spi-cpha;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x000a0000>;
-		};
-
-		partition@a0000 {
-			label = "env";
-			reg = <0x000a0000 0x00060000>;
-		};
-
-		partition@100000 {
-			label = "system";
-			reg = <0x00100000 0x00600000>;
-		};
-
-		partition@700000 {
-			label = "rootfs";
-			reg = <0x00700000 0x01900000>;
-		};
-	};
-};
-
-&sata_phy0 {
-	status = "okay";
-};
-
-&sata_phy1 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&xhci {
-	status = "okay";
-};
-
-&srab {
-	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
-};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
deleted file mode 100644
index ca9311452739e..0000000000000
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm-nsp.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "NorthStar Plus XMC (BCM958525xmc)";
-	compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpioa 31 GPIO_ACTIVE_LOW>;
-		open-source;
-		priority = <200>;
-	};
-};
-
-/* XHCI support needed to be complete */
-
-&dma {
-	status = "okay";
-};
-
-&amac0 {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	temperature-sensor@4c {
-		compatible = "adi,adt7461a";
-		reg = <0x4c>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	rtc@68 {
-		compatible = "st,m41t81";
-		reg = <0x68>;
-	};
-};
-
-&nand_controller {
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <24>;
-		nand-ecc-step-size = <1024>;
-
-		brcm,nand-oob-sector-size = <27>;
-
-		partition@0 {
-			label = "nboot";
-			reg = <0x00000000 0x00200000>;
-			read-only;
-		};
-		partition@200000 {
-			label = "nenv";
-			reg = <0x00200000 0x00400000>;
-		};
-		partition@600000 {
-			label = "nsystem";
-			reg = <0x00600000 0x00a00000>;
-		};
-		partition@1000000 {
-			label = "nrootfs";
-			reg = <0x01000000 0x03000000>;
-		};
-		partition@4000000 {
-			label = "ncustfs";
-			reg = <0x04000000 0x3c000000>;
-		};
-	};
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_sel>;
-	nand_sel: nand_sel {
-		function = "nand";
-		groups = "nand_grp";
-	};
-};
-
-&qspi {
-	status = "okay";
-	bspi-sel = <0>;
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p80";
-		reg = <0x0>;
-		spi-max-frequency = <12500000>;
-		m25p,fast-read;
-		spi-cpol;
-		spi-cpha;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x000a0000>;
-		};
-
-		partition@a0000 {
-			label = "env";
-			reg = <0x000a0000 0x00060000>;
-		};
-
-		partition@100000 {
-			label = "system";
-			reg = <0x00100000 0x00600000>;
-		};
-
-		partition@700000 {
-			label = "rootfs";
-			reg = <0x00700000 0x01900000>;
-		};
-	};
-};
-
-&sata_phy0 {
-	status = "okay";
-};
-
-&sata_phy1 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sdio {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&xhci {
-	status = "okay";
-};
-
-&srab {
-	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
-};
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
deleted file mode 100644
index 9db3c851451a0..0000000000000
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm-nsp.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "NorthStar Plus SVK (BCM958622HR)";
-	compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
-		open-source;
-		priority = <200>;
-	};
-};
-
-/* USB 3 and SLIC support needed to be complete */
-
-&dma {
-	status = "okay";
-};
-
-&amac0 {
-	status = "okay";
-};
-
-&amac1 {
-	status = "okay";
-};
-
-&amac2 {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&nand_controller {
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <24>;
-		nand-ecc-step-size = <1024>;
-
-		brcm,nand-oob-sector-size = <27>;
-
-		partition@0 {
-			label = "nboot";
-			reg = <0x00000000 0x00200000>;
-			read-only;
-		};
-		partition@200000 {
-			label = "nenv";
-			reg = <0x00200000 0x00400000>;
-		};
-		partition@600000 {
-			label = "nsystem";
-			reg = <0x00600000 0x00a00000>;
-		};
-		partition@1000000 {
-			label = "nrootfs";
-			reg = <0x01000000 0x03000000>;
-		};
-		partition@4000000 {
-			label = "ncustfs";
-			reg = <0x04000000 0x3c000000>;
-		};
-	};
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_sel>;
-	nand_sel: nand_sel {
-		function = "nand";
-		groups = "nand_grp";
-	};
-};
-
-&qspi {
-	status = "okay";
-	bspi-sel = <0>;
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p80";
-		reg = <0x0>;
-		spi-max-frequency = <12500000>;
-		m25p,fast-read;
-		spi-cpol;
-		spi-cpha;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x000a0000>;
-		};
-
-		partition@a0000 {
-			label = "env";
-			reg = <0x000a0000 0x00060000>;
-		};
-
-		partition@100000 {
-			label = "system";
-			reg = <0x00100000 0x00600000>;
-		};
-
-		partition@700000 {
-			label = "rootfs";
-			reg = <0x00700000 0x01900000>;
-		};
-	};
-};
-
-&srab {
-	compatible = "brcm,bcm58622-srab", "brcm,nsp-srab";
-	status = "okay";
-
-	ports {
-		port@0 {
-			label = "port0";
-			reg = <0>;
-		};
-
-		port@1 {
-			label = "port1";
-			reg = <1>;
-		};
-
-		port@2 {
-			label = "port2";
-			reg = <2>;
-		};
-
-		port@3 {
-			label = "port3";
-			reg = <3>;
-		};
-
-		port@4 {
-			label = "port4";
-			reg = <4>;
-		};
-
-		port@8 {
-			ethernet = <&amac2>;
-			label = "cpu";
-			reg = <8>;
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&xhci {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
deleted file mode 100644
index 32786e7c4e12e..0000000000000
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm-nsp.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "NorthStar Plus SVK (BCM958623HR)";
-	compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
-		open-source;
-		priority = <200>;
-	};
-};
-
-/* USB 3 and SLIC support needed to be complete */
-
-&dma {
-	status = "okay";
-};
-
-&amac0 {
-	status = "okay";
-};
-
-&amac1 {
-	status = "okay";
-};
-
-&amac2 {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&nand_controller {
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <24>;
-		nand-ecc-step-size = <1024>;
-
-		brcm,nand-oob-sector-size = <27>;
-
-		partition@0 {
-			label = "nboot";
-			reg = <0x00000000 0x00200000>;
-			read-only;
-		};
-		partition@200000 {
-			label = "nenv";
-			reg = <0x00200000 0x00400000>;
-		};
-		partition@600000 {
-			label = "nsystem";
-			reg = <0x00600000 0x00a00000>;
-		};
-		partition@1000000 {
-			label = "nrootfs";
-			reg = <0x01000000 0x03000000>;
-		};
-		partition@4000000 {
-			label = "ncustfs";
-			reg = <0x04000000 0x3c000000>;
-		};
-	};
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_sel>;
-	nand_sel: nand_sel {
-		function = "nand";
-		groups = "nand_grp";
-	};
-};
-
-&sata_phy0 {
-	status = "okay";
-};
-
-&qspi {
-	status = "okay";
-	bspi-sel = <0>;
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p80";
-		reg = <0x0>;
-		spi-max-frequency = <12500000>;
-		m25p,fast-read;
-		spi-cpol;
-		spi-cpha;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x000a0000>;
-		};
-
-		partition@a0000 {
-			label = "env";
-			reg = <0x000a0000 0x00060000>;
-		};
-
-		partition@100000 {
-			label = "system";
-			reg = <0x00100000 0x00600000>;
-		};
-
-		partition@700000 {
-			label = "rootfs";
-			reg = <0x00700000 0x01900000>;
-		};
-	};
-};
-
-&srab {
-	compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
-	status = "okay";
-
-	ports {
-		port@0 {
-			label = "port0";
-			reg = <0>;
-		};
-
-		port@1 {
-			label = "port1";
-			reg = <1>;
-		};
-
-		port@2 {
-			label = "port2";
-			reg = <2>;
-		};
-
-		port@3 {
-			label = "port3";
-			reg = <3>;
-		};
-
-		port@4 {
-			label = "port4";
-			reg = <4>;
-		};
-
-		port@8 {
-			ethernet = <&amac2>;
-			label = "cpu";
-			reg = <8>;
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&xhci {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
deleted file mode 100644
index c54451dde6dd4..0000000000000
--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+++ /dev/null
@@ -1,284 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
- *
- * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
- */
-
-#include "bcm958625-meraki-mx6x-common.dtsi"
-
-/ {
-	keys {
-		compatible = "gpio-keys-polled";
-		autorepeat;
-		poll-interval = <20>;
-
-		button-reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			/* green:wan1-left */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <0>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
-		};
-
-		led-1 {
-			/* green:wan1-right */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
-		};
-
-		led-2 {
-			/* green:wan2-left */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
-		};
-
-		led-3 {
-			/* green:wan2-right */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <3>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
-		};
-
-		led-4 {
-			/* amber:power */
-			function = LED_FUNCTION_FAULT;
-			color = <LED_COLOR_ID_AMBER>;
-			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-5 {
-			/* white:status */
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_WHITE>;
-			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&axi {
-	mdio-mux@3f1c0 {
-		compatible = "mdio-mux-mmioreg", "mdio-mux";
-		reg = <0x3f1c0 0x4>;
-		mux-mask = <0x2000>;
-		mdio-parent-bus = <&mdio_ext>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mdio@0 {
-			reg = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy_port6: phy@0 {
-				reg = <0>;
-			};
-
-			phy_port7: phy@1 {
-				reg = <1>;
-			};
-
-			phy_port8: phy@2 {
-				reg = <2>;
-			};
-
-			phy_port9: phy@3 {
-				reg = <3>;
-			};
-
-			phy_port10: phy@4 {
-				reg = <4>;
-			};
-
-			switch@10 {
-				compatible = "qca,qca8337";
-				reg = <0x10>;
-				dsa,member = <1 0>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					port@0 {
-						reg = <0>;
-						ethernet = <&sgmii1>;
-						phy-mode = "sgmii";
-						qca,sgmii-enable-pll;
-						qca,sgmii-txclk-falling-edge;
-						fixed-link {
-							speed = <1000>;
-							full-duplex;
-						};
-					};
-
-					port@1 {
-						reg = <1>;
-						label = "lan8";
-						phy-handle = <&phy_port6>;
-					};
-
-					port@2 {
-						reg = <2>;
-						label = "lan9";
-						phy-handle = <&phy_port7>;
-					};
-
-					port@3 {
-						reg = <3>;
-						label = "lan10";
-						phy-handle = <&phy_port8>;
-					};
-
-					port@4 {
-						reg = <4>;
-						label = "lan11";
-						phy-handle = <&phy_port9>;
-					};
-
-					port@5 {
-						reg = <5>;
-						label = "lan12";
-						phy-handle = <&phy_port10>;
-					};
-				};
-			};
-		};
-
-		mdio-mii@2000 {
-			reg = <0x2000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy_port1: phy@0 {
-				reg = <0>;
-			};
-
-			phy_port2: phy@1 {
-				reg = <1>;
-			};
-
-			phy_port3: phy@2 {
-				reg = <2>;
-			};
-
-			phy_port4: phy@3 {
-				reg = <3>;
-			};
-
-			phy_port5: phy@4 {
-				reg = <4>;
-			};
-
-			switch@10 {
-				compatible = "qca,qca8337";
-				reg = <0x10>;
-				dsa,member = <2 0>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					port@0 {
-						reg = <0>;
-						ethernet = <&sgmii0>;
-						phy-mode = "sgmii";
-						qca,sgmii-enable-pll;
-						qca,sgmii-txclk-falling-edge;
-						fixed-link {
-							speed = <1000>;
-							full-duplex;
-						};
-					};
-
-					port@1 {
-						reg = <1>;
-						label = "lan3";
-						phy-handle = <&phy_port1>;
-					};
-
-					port@2 {
-						reg = <2>;
-						label = "lan4";
-						phy-handle = <&phy_port2>;
-					};
-
-					port@3 {
-						reg = <3>;
-						label = "lan5";
-						phy-handle = <&phy_port3>;
-					};
-
-					port@4 {
-						reg = <4>;
-						label = "lan6";
-						phy-handle = <&phy_port4>;
-					};
-
-					port@5 {
-						reg = <5>;
-						label = "lan7";
-						phy-handle = <&phy_port5>;
-					};
-				};
-			};
-		};
-	};
-};
-
-&srab {
-	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
-	status = "okay";
-	dsa,member = <0 0>;
-
-	ports {
-		port@0 {
-			label = "wan1";
-			reg = <0>;
-		};
-
-		port@1 {
-			label = "wan2";
-			reg = <1>;
-		};
-
-		sgmii0: port@4 {
-			label = "sw0";
-			reg = <4>;
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		sgmii1: port@5 {
-			label = "sw1";
-			reg = <5>;
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		port@8 {
-			ethernet = <&amac2>;
-			reg = <8>;
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
deleted file mode 100644
index 1830844c84048..0000000000000
--- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
- *
- * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
- */
-
-#include "bcm958625-meraki-mx6x-common.dtsi"
-
-/ {
-
-	keys {
-		compatible = "gpio-keys-polled";
-		autorepeat;
-		poll-interval = <20>;
-
-		button-reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			/* green:lan1-left */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <0>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
-		};
-
-		led-1 {
-			/* green:lan1-right */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
-		};
-
-		led-2 {
-			/* green:lan2-left */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
-		};
-
-		led-3 {
-			/* green:lan2-right */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <3>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
-		};
-
-		led-4 {
-			/* green:lan3-left */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <4>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
-		};
-
-		led-5 {
-			/* green:lan3-right */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <5>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
-		};
-
-		led-6 {
-			/* green:lan4-left */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <6>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
-		};
-
-		led-7 {
-			/* green:lan4-right */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <7>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
-		};
-
-		led-8 {
-			/* green:wan-left */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <8>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
-		};
-
-		led-9 {
-			/* green:wan-right */
-			function = LED_FUNCTION_ACTIVITY;
-			function-enumerator = <9>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
-		};
-
-		led-a {
-			/* amber:power */
-			function = LED_FUNCTION_FAULT;
-			color = <LED_COLOR_ID_AMBER>;
-			gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
-		};
-
-		led-b {
-			/* white:status */
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_WHITE>;
-			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&srab {
-	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
-	status = "okay";
-
-	ports {
-		port@0 {
-			label = "lan1";
-			reg = <0>;
-		};
-
-		port@1 {
-			label = "lan2";
-			reg = <1>;
-		};
-
-		port@2 {
-			label = "lan3";
-			reg = <2>;
-		};
-
-		port@3 {
-			label = "lan4";
-			reg = <3>;
-		};
-
-		port@4 {
-			label = "wan";
-			reg = <4>;
-		};
-
-		port@8 {
-			ethernet = <&amac2>;
-			reg = <8>;
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
deleted file mode 100644
index 9944566c1195f..0000000000000
--- a/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
- *
- * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm958625-meraki-kingpin.dtsi"
-#include "bcm-nsp-ax.dtsi"
-
-/ {
-	model = "Cisco Meraki MX64(A0)";
-	compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
deleted file mode 100644
index 06939438e8747..0000000000000
--- a/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
- *
- * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm958625-meraki-kingpin.dtsi"
-
-/ {
-	model = "Cisco Meraki MX64";
-	compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
deleted file mode 100644
index 112fddb1eed89..0000000000000
--- a/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
- *
- * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm958625-meraki-kingpin.dtsi"
-#include "bcm-nsp-ax.dtsi"
-
-/ {
-	model = "Cisco Meraki MX64W(A0)";
-	compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
-	};
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
deleted file mode 100644
index de2e367c3e788..0000000000000
--- a/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
- *
- * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm958625-meraki-kingpin.dtsi"
-
-/ {
-	model = "Cisco Meraki MX64W";
-	compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
-	};
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
deleted file mode 100644
index d1b684dcdbfaa..0000000000000
--- a/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree Bindings for Cisco Meraki MX65.
- *
- * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm958625-meraki-alamo.dtsi"
-
-/ {
-	model = "Cisco Meraki MX65";
-	compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
deleted file mode 100644
index a2165aba36766..0000000000000
--- a/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree Bindings for Cisco Meraki MX65W.
- *
- * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm958625-meraki-alamo.dtsi"
-
-/ {
-	model = "Cisco Meraki MX65W";
-	compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
-	};
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
deleted file mode 100644
index b0854d881ac68..0000000000000
--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
- *
- * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
- */
-
-#include "bcm-nsp.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	pwm-leds {
-		compatible = "pwm-leds";
-
-		led-1 {
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_RED>;
-			pwms = <&pwm 1 50000>;
-			max-brightness = <255>;
-		};
-
-		led-2 {
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_GREEN>;
-			pwms = <&pwm 2 50000>;
-			max-brightness = <255>;
-		};
-
-		led-3 {
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_BLUE>;
-			pwms = <&pwm 3 50000>;
-			max-brightness = <255>;
-		};
-	};
-};
-
-&amac2 {
-	status = "okay";
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-		read-only;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		mac_address: mac-address@66 {
-			reg = <0x66 0x6>;
-		};
-	};
-};
-
-&nand_controller {
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <24>;
-		nand-ecc-step-size = <1024>;
-
-		brcm,nand-oob-sector-size = <27>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@80000 {
-			label = "shmoo";
-			reg = <0x80000 0x80000>;
-			read-only;
-		};
-
-		partition@100000 {
-			label = "bootkernel1";
-			reg = <0x100000 0x300000>;
-		};
-
-		partition@400000 {
-			label = "nvram";
-			reg = <0x400000 0x100000>;
-		};
-
-		partition@500000 {
-			label = "bootkernel2";
-			reg = <0x500000 0x300000>;
-		};
-
-		partition@800000 {
-			label = "ubi";
-			reg = <0x800000 0x3f700000>;
-		};
-	};
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm_leds>;
-
-	pwm_leds: pwm_leds {
-		function = "pwm";
-		groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
-	};
-};
-
-&pwm {
-	status = "okay";
-	#pwm-cells = <2>;
-};
-
-&uart0 {
-	clock-frequency = <62500000>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
deleted file mode 100644
index 74263d98de73b..0000000000000
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm-nsp.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "NorthStar Plus SVK (BCM958625HR)";
-	compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x20000000>;
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
-		open-source;
-		priority = <200>;
-	};
-
-	sfp: sfp {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
-		los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&dma {
-	status = "okay";
-};
-
-&amac0 {
-	status = "okay";
-};
-
-&amac1 {
-	status = "okay";
-};
-
-&amac2 {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&nand_controller {
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <24>;
-		nand-ecc-step-size = <1024>;
-
-		brcm,nand-oob-sector-size = <27>;
-
-		partition@0 {
-			label = "nboot";
-			reg = <0x00000000 0x00200000>;
-			read-only;
-		};
-		partition@200000 {
-			label = "nenv";
-			reg = <0x00200000 0x00400000>;
-		};
-		partition@600000 {
-			label = "nsystem";
-			reg = <0x00600000 0x00a00000>;
-		};
-		partition@1000000 {
-			label = "nrootfs";
-			reg = <0x01000000 0x03000000>;
-		};
-		partition@4000000 {
-			label = "ncustfs";
-			reg = <0x04000000 0x3c000000>;
-		};
-	};
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_sel>;
-	nand_sel: nand_sel {
-		function = "nand";
-		groups = "nand_grp";
-	};
-};
-
-&qspi {
-	status = "okay";
-	bspi-sel = <0>;
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p80";
-		reg = <0x0>;
-		spi-max-frequency = <12500000>;
-		m25p,fast-read;
-		spi-cpol;
-		spi-cpha;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x000a0000>;
-		};
-
-		partition@a0000 {
-			label = "env";
-			reg = <0x000a0000 0x00060000>;
-		};
-
-		partition@100000 {
-			label = "system";
-			reg = <0x00100000 0x00600000>;
-		};
-
-		partition@700000 {
-			label = "rootfs";
-			reg = <0x00700000 0x01900000>;
-		};
-	};
-};
-
-&sata_phy0 {
-	status = "okay";
-};
-
-&sata_phy1 {
-	status = "okay";
-};
-
-&srab {
-	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
-	status = "okay";
-
-	ports {
-		port@0 {
-			label = "port0";
-			reg = <0>;
-		};
-
-		port@1 {
-			label = "port1";
-			reg = <1>;
-		};
-
-		port@2 {
-			label = "port2";
-			reg = <2>;
-		};
-
-		port@3 {
-			label = "port3";
-			reg = <3>;
-		};
-
-		port@4 {
-			label = "port4";
-			reg = <4>;
-		};
-
-		port@5 {
-			label = "sfp";
-			phy-mode = "sgmii";
-			reg = <5>;
-			sfp = <&sfp>;
-			managed = "in-band-status";
-		};
-
-		port@8 {
-			ethernet = <&amac2>;
-			label = "cpu";
-			reg = <8>;
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&xhci {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
deleted file mode 100644
index 69ebc7a913a73..0000000000000
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm-nsp.dtsi"
-
-/ {
-	model = "NorthStar Plus SVK (BCM958625K)";
-	compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
-	};
-};
-
-&dma {
-	status = "okay";
-};
-
-&amac0 {
-	status = "okay";
-};
-
-&amac1 {
-	status = "okay";
-};
-
-&amac2 {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&nand_controller {
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <24>;
-		nand-ecc-step-size = <1024>;
-
-		brcm,nand-oob-sector-size = <27>;
-
-		partition@0 {
-			label = "nboot";
-			reg = <0x00000000 0x00200000>;
-			read-only;
-		};
-		partition@200000 {
-			label = "nenv";
-			reg = <0x00200000 0x00400000>;
-		};
-		partition@600000 {
-			label = "nsystem";
-			reg = <0x00600000 0x00a00000>;
-		};
-		partition@1000000 {
-			label = "nrootfs";
-			reg = <0x01000000 0x03000000>;
-		};
-		partition@4000000 {
-			label = "ncustfs";
-			reg = <0x04000000 0x3c000000>;
-		};
-	};
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_sel>, <&gpiobs>, <&pwmc>;
-
-	nand_sel: nand_sel {
-		function = "nand";
-		groups = "nand_grp";
-	};
-
-	gpiobs: gpiobs {
-		function = "gpio_b";
-		groups = "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp",
-			 "gpio_b_3_grp";
-	};
-
-	pwmc: pwmc {
-		function = "pwm";
-		groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp";
-	};
-
-	emmc_sel: emmc_sel {
-		function = "emmc";
-		groups = "emmc_grp";
-	};
-};
-
-&pwm {
-	status = "okay";
-};
-
-&qspi {
-	status = "okay";
-	bspi-sel = <0>;
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p80";
-		reg = <0x0>;
-		spi-max-frequency = <12500000>;
-		m25p,fast-read;
-		spi-cpol;
-		spi-cpha;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x000a0000>;
-		};
-
-		partition@a0000 {
-			label = "env";
-			reg = <0x000a0000 0x00060000>;
-		};
-
-		partition@100000 {
-			label = "system";
-			reg = <0x00100000 0x00600000>;
-		};
-
-		partition@700000 {
-			label = "rootfs";
-			reg = <0x00700000 0x01900000>;
-		};
-	};
-};
-
-&sata_phy0 {
-	status = "okay";
-};
-
-&sata_phy1 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-/*
- * By default the sd slot is functional. For emmc to work add "<&emmc_sel>"
- * and delete "<&nand_sel>" in "pinctrl-0" property of pinctrl node. Remove the
- * bus-width property here and disable the nand node with status = "disabled";.
- *
- * Ex: pinctrl-0 = <&emmc_sel>, <&gpiobs>, <&pwmc>;
- */
-&sdio {
-	bus-width = <4>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&srab {
-	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
-	status = "okay";
-
-	ports {
-		port@0 {
-			label = "port0";
-			reg = <0>;
-		};
-
-		port@1 {
-			label = "port1";
-			reg = <1>;
-		};
-
-		port@2 {
-			label = "port2";
-			reg = <2>;
-		};
-
-		port@3 {
-			label = "port3";
-			reg = <3>;
-		};
-
-		port@4 {
-			label = "port4";
-			reg = <4>;
-		};
-
-		port@8 {
-			ethernet = <&amac2>;
-			label = "cpu";
-			reg = <8>;
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&xhci {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts
deleted file mode 100644
index 1b405c2492137..0000000000000
--- a/arch/arm/boot/dts/bcm963138.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63138.dtsi"
-
-/ {
-	model = "Broadcom BCM963138 Reference Board";
-	compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serial0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&hsspi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
deleted file mode 100644
index b5af61853a072..0000000000000
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Broadcom BCM63138 Reference Board DTS
- */
-
-/dts-v1/;
-
-#include "bcm63138.dtsi"
-
-/ {
-	compatible = "brcm,BCM963138DVT", "brcm,bcm63138", "brcm,bcmbca";
-	model = "Broadcom BCM963138DVT";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serial0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		brcm,nand-oob-sectors-size = <16>;
-	};
-};
-
-&ahci {
-	status = "okay";
-};
-
-&sata_phy {
-	status = "okay";
-};
-
-&hsspi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts
deleted file mode 100644
index 1f5d6d783f090..0000000000000
--- a/arch/arm/boot/dts/bcm963148.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63148.dtsi"
-
-/ {
-	model = "Broadcom BCM963148 Reference Board";
-	compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&hsspi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts
deleted file mode 100644
index d036e99dd8d16..0000000000000
--- a/arch/arm/boot/dts/bcm963178.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63178.dtsi"
-
-/ {
-	model = "Broadcom BCM963178 Reference Board";
-	compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&hsspi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts
deleted file mode 100644
index 8b104f3fb14ae..0000000000000
--- a/arch/arm/boot/dts/bcm96756.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6756.dtsi"
-
-/ {
-	model = "Broadcom BCM96756 Reference Board";
-	compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&hsspi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts
deleted file mode 100644
index 55852c2296087..0000000000000
--- a/arch/arm/boot/dts/bcm96846.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6846.dtsi"
-
-/ {
-	model = "Broadcom BCM96846 Reference Board";
-	compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&hsspi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts
deleted file mode 100644
index 2ad880af21044..0000000000000
--- a/arch/arm/boot/dts/bcm96855.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6855.dtsi"
-
-/ {
-	model = "Broadcom BCM96855 Reference Board";
-	compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&hsspi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts
deleted file mode 100644
index b7af8ade7a9d0..0000000000000
--- a/arch/arm/boot/dts/bcm96878.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6878.dtsi"
-
-/ {
-	model = "Broadcom BCM96878 Reference Board";
-	compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&hsspi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
deleted file mode 100644
index e96bc3f2d5cfa..0000000000000
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "bcm-nsp.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "NorthStar Plus SVK (BCM988312HR)";
-	compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
-		open-source;
-		priority = <200>;
-	};
-};
-
-/* USB 3 support needed to be complete */
-
-&dma {
-	status = "okay";
-};
-
-&amac0 {
-	status = "okay";
-};
-
-&amac1 {
-	status = "okay";
-};
-
-&amac2 {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&nand_controller {
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <24>;
-		nand-ecc-step-size = <1024>;
-
-		brcm,nand-oob-sector-size = <27>;
-
-		partition@0 {
-			label = "nboot";
-			reg = <0x00000000 0x00200000>;
-			read-only;
-		};
-		partition@200000 {
-			label = "nenv";
-			reg = <0x00200000 0x00400000>;
-		};
-		partition@600000 {
-			label = "nsystem";
-			reg = <0x00600000 0x00a00000>;
-		};
-		partition@1000000 {
-			label = "nrootfs";
-			reg = <0x01000000 0x03000000>;
-		};
-		partition@4000000 {
-			label = "ncustfs";
-			reg = <0x04000000 0x3c000000>;
-		};
-	};
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_sel>;
-	nand_sel: nand_sel {
-		function = "nand";
-		groups = "nand_grp";
-	};
-};
-
-&qspi {
-	status = "okay";
-	bspi-sel = <0>;
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p80";
-		reg = <0x0>;
-		spi-max-frequency = <12500000>;
-		m25p,fast-read;
-		spi-cpol;
-		spi-cpha;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x000a0000>;
-		};
-
-		partition@a0000 {
-			label = "env";
-			reg = <0x000a0000 0x00060000>;
-		};
-
-		partition@100000 {
-			label = "system";
-			reg = <0x00100000 0x00600000>;
-		};
-
-		partition@700000 {
-			label = "rootfs";
-			reg = <0x00700000 0x01900000>;
-		};
-	};
-};
-
-&sata_phy0 {
-	status = "okay";
-};
-
-&sata_phy1 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&srab {
-	compatible = "brcm,bcm88312-srab", "brcm,nsp-srab";
-	status = "okay";
-
-	ports {
-		port@0 {
-			label = "port0";
-			reg = <0>;
-		};
-
-		port@1 {
-			label = "port1";
-			reg = <1>;
-		};
-
-		port@2 {
-			label = "port2";
-			reg = <2>;
-		};
-
-		port@3 {
-			label = "port3";
-			reg = <3>;
-		};
-
-		port@4 {
-			label = "port4";
-			reg = <4>;
-		};
-
-		port@8 {
-			ethernet = <&amac2>;
-			label = "cpu";
-			reg = <8>;
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm9hmidc.dtsi b/arch/arm/boot/dts/bcm9hmidc.dtsi
deleted file mode 100644
index 65397c0883355..0000000000000
--- a/arch/arm/boot/dts/bcm9hmidc.dtsi
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * Broadcom human machine interface daughter card (bcm9hmidc) installed on
- * bcm958300k/bcm958305k boards
- */
-
-&touchscreen {
-	touchscreen-inverted-x;
-	touchscreen-inverted-y;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
deleted file mode 100644
index 64a297759eb9c..0000000000000
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for Sony NSZ-GS7
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- */
-
-/dts-v1/;
-
-#include "berlin2.dtsi"
-
-/ {
-	model = "Sony NSZ-GS7";
-	compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
-
-	chosen {
-		bootargs = "earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-};
-
-&ahci { status = "okay"; };
-
-&eth1 { status = "okay"; };
-
-/* Unpopulated SATA plug on solder side */
-&sata0 { status = "okay"; };
-
-&sata_phy { status = "okay"; };
-
-/* Samsung M8G2FA 8GB eMMC */
-&sdhci2 {
-	non-removable;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&uart0 { status = "okay"; };
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
deleted file mode 100644
index 1114c592e461b..0000000000000
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ /dev/null
@@ -1,540 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 1500 (Berlin BG2) SoC
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * based on GPL'ed 2.6 kernel sources
- *  (c) Marvell International Ltd.
- */
-
-#include <dt-bindings/clock/berlin2.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	model = "Marvell Armada 1500 (BG2) SoC";
-	compatible = "marvell,berlin2", "marvell,berlin";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,berlin-smp";
-
-		cpu@0 {
-			compatible = "marvell,pj4b";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-
-			clocks = <&chip_clk CLKID_CPU>;
-			clock-latency = <100000>;
-			operating-points = <
-				/* kHz    uV */
-				1200000 1200000
-				1000000 1200000
-				800000  1200000
-				600000  1200000
-			>;
-		};
-
-		cpu@1 {
-			compatible = "marvell,pj4b";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <1>;
-
-			clocks = <&chip_clk CLKID_CPU>;
-			clock-latency = <100000>;
-			operating-points = <
-				/* kHz    uV */
-				1200000 1200000
-				1000000 1200000
-				800000  1200000
-				600000  1200000
-			>;
-		};
-	};
-
-	refclk: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	soc@f7000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&gic>;
-
-		ranges = <0 0xf7000000 0x1000000>;
-
-		sdhci0: mmc@ab0000 {
-			compatible = "mrvl,pxav3-mmc";
-			reg = <0xab0000 0x200>;
-			clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
-			clock-names = "io", "core";
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		sdhci1: mmc@ab0800 {
-			compatible = "mrvl,pxav3-mmc";
-			reg = <0xab0800 0x200>;
-			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>;
-			clock-names = "io", "core";
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		sdhci2: mmc@ab1000 {
-			compatible = "mrvl,pxav3-mmc";
-			reg = <0xab1000 0x200>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
-			clock-names = "io", "core";
-			pinctrl-0 = <&emmc_pmux>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		l2: cache-controller@ac0000 {
-			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
-			reg = <0xac0000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		scu: snoop-control-unit@ad0000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0xad0000 0x58>;
-		};
-
-		gic: interrupt-controller@ad1000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-		};
-
-		local-timer@ad0600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&chip_clk CLKID_TWD>;
-		};
-
-		eth1: ethernet@b90000 {
-			compatible = "marvell,pxa168-eth";
-			reg = <0xb90000 0x10000>;
-			clocks = <&chip_clk CLKID_GETH1>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			/* set by bootloader */
-			local-mac-address = [00 00 00 00 00 00];
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy-connection-type = "mii";
-			phy-handle = <&ethphy1>;
-			status = "disabled";
-
-			ethphy1: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		cpu-ctrl@dd0000 {
-			compatible = "marvell,berlin-cpu-ctrl";
-			reg = <0xdd0000 0x10000>;
-		};
-
-		eth0: ethernet@e50000 {
-			compatible = "marvell,pxa168-eth";
-			reg = <0xe50000 0x10000>;
-			clocks = <&chip_clk CLKID_GETH0>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			/* set by bootloader */
-			local-mac-address = [00 00 00 00 00 00];
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy-connection-type = "mii";
-			phy-handle = <&ethphy0>;
-			status = "disabled";
-
-			ethphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		apb@e80000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xe80000 0x10000>;
-			interrupt-parent = <&aic>;
-
-			gpio0: gpio@400 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0400 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porta: gpio-port@0 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <0>;
-				};
-			};
-
-			gpio1: gpio@800 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0800 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portb: gpio-port@1 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <1>;
-				};
-			};
-
-			gpio2: gpio@c00 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0c00 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portc: gpio-port@2 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <2>;
-				};
-			};
-
-			gpio3: gpio@1000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x1000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portd: gpio-port@3 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <3>;
-				};
-			};
-
-			timer0: timer@2c00 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c00 0x14>;
-				interrupts = <8>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "okay";
-			};
-
-			timer1: timer@2c14 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c14 0x14>;
-				interrupts = <9>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "okay";
-			};
-
-			timer2: timer@2c28 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c28 0x14>;
-				interrupts = <10>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer3: timer@2c3c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c3c 0x14>;
-				interrupts = <11>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer4: timer@2c50 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c50 0x14>;
-				interrupts = <12>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer5: timer@2c64 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c64 0x14>;
-				interrupts = <13>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer6: timer@2c78 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c78 0x14>;
-				interrupts = <14>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer7: timer@2c8c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c8c 0x14>;
-				interrupts = <15>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			aic: interrupt-controller@3000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0x3000 0xc00>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		ahci: sata@e90000 {
-			compatible = "marvell,berlin2-ahci", "generic-ahci";
-			reg = <0xe90000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip_clk CLKID_SATA>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			sata0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata_phy 0>;
-				status = "disabled";
-			};
-
-			sata1: sata-port@1 {
-				reg = <1>;
-				phys = <&sata_phy 1>;
-				status = "disabled";
-			};
-		};
-
-		sata_phy: phy@e900a0 {
-			compatible = "marvell,berlin2-sata-phy";
-			reg = <0xe900a0 0x200>;
-			clocks = <&chip_clk CLKID_SATA>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#phy-cells = <1>;
-			status = "disabled";
-
-			sata-phy@0 {
-				reg = <0>;
-			};
-
-			sata-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		chip: chip-control@ea0000 {
-			compatible = "simple-mfd", "syscon";
-			reg = <0xea0000 0x400>;
-
-			chip_clk: clock {
-				compatible = "marvell,berlin2-clk";
-				#clock-cells = <1>;
-				clocks = <&refclk>;
-				clock-names = "refclk";
-			};
-
-			soc_pinctrl: pin-controller {
-				compatible = "marvell,berlin2-soc-pinctrl";
-
-				emmc_pmux: emmc-pmux {
-					groups = "G26";
-					function = "emmc";
-				};
-			};
-
-			chip_rst: reset {
-				compatible = "marvell,berlin2-reset";
-				#reset-cells = <2>;
-			};
-		};
-
-		pwm: pwm@f20000 {
-			compatible = "marvell,berlin-pwm";
-			reg = <0xf20000 0x40>;
-			clocks = <&chip_clk CLKID_CFG>;
-			#pwm-cells = <3>;
-		};
-
-		apb@fc0000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xfc0000 0x10000>;
-			interrupt-parent = <&sic>;
-
-			wdt0: watchdog@1000 {
-				compatible = "snps,dw-wdt";
-				reg = <0x1000 0x100>;
-				clocks = <&refclk>;
-				interrupts = <0>;
-			};
-
-			wdt1: watchdog@2000 {
-				compatible = "snps,dw-wdt";
-				reg = <0x2000 0x100>;
-				clocks = <&refclk>;
-				interrupts = <1>;
-			};
-
-			wdt2: watchdog@3000 {
-				compatible = "snps,dw-wdt";
-				reg = <0x3000 0x100>;
-				clocks = <&refclk>;
-				interrupts = <2>;
-			};
-
-			sm_gpio1: gpio@5000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x5000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portf: gpio-port@5 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <8>;
-					reg = <0>;
-				};
-			};
-
-			sm_gpio0: gpio@c000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0xc000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porte: gpio-port@4 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <11>;
-				};
-			};
-
-			uart0: serial@9000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x9000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <8>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&uart0_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart1: serial@a000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xa000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <9>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&uart1_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart2: serial@b000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xb000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <10>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&uart2_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			sysctrl: system-controller@d000 {
-				compatible = "simple-mfd", "syscon";
-				reg = <0xd000 0x100>;
-
-				sys_pinctrl: pin-controller {
-					compatible = "marvell,berlin2-system-pinctrl";
-					uart0_pmux: uart0-pmux {
-						groups = "GSM4";
-						function = "uart0";
-					};
-
-					uart1_pmux: uart1-pmux {
-						groups = "GSM5";
-						function = "uart1";
-					};
-					uart2_pmux: uart2-pmux {
-						groups = "GSM3";
-						function = "uart2";
-					};
-				};
-			};
-
-			sic: interrupt-controller@e000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0xe000 0x400>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
deleted file mode 100644
index c1d91424e6580..0000000000000
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for Google Chromecast
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- */
-
-/dts-v1/;
-
-#include "berlin2cd.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Google Chromecast";
-	compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin";
-
-	chosen {
-		bootargs = "earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-
-		/*
-		 * We're using "linux,usable-memory" instead of "reg" here
-		 * because the (signed and encrypted) bootloader that shipped
-		 * with this device provides an incorrect memory range in
-		 * ATAG_MEM. Linux helpfully overrides the "reg" property with
-		 * data from the ATAG, so we can't specify the proper range
-		 * normally. Fortunately, this alternate property is checked
-		 * first by the OF driver, so we can (ab)use it instead.
-		 */
-		linux,usable-memory = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	led-controller {
-		compatible = "pwm-leds";
-		pinctrl-0 = <&ledpwm_pmux>;
-		pinctrl-names = "default";
-
-		led-1 {
-			label = "white";
-			pwms = <&pwm 0 600000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-2 {
-			label = "red";
-			pwms = <&pwm 1 600000 0>;
-			max-brightness = <255>;
-		};
-	};
-};
-
-/*
- * AzureWave AW-NH387 (Marvell 88W8787)
- * 802.11b/g/n + Bluetooth 2.1
- */
-&sdhci0 {
-	non-removable;
-	status = "okay";
-};
-
-&uart0 { status = "okay"; };
-
-&usb_phy1 { status = "okay"; };
-
-&usb1 { status = "okay"; };
-
-&soc_pinctrl {
-	ledpwm_pmux: ledpwm-pmux {
-		groups = "G0";
-		function = "pwm";
-	};
-};
diff --git a/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts b/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts
deleted file mode 100644
index 79ac842ae461e..0000000000000
--- a/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2018 Alexander Monakov <amonakov@gmail.com>
- */
-/dts-v1/;
-
-#include "berlin2cd.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Valve Steam Link";
-	compatible = "valve,steamlink", "marvell,berlin2cd", "marvell,berlin";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&porta 6 GPIO_ACTIVE_HIGH>;
-		active-delay = <100>;
-		inactive-delay = <10>;
-		wait-delay = <100>;
-		priority = <200>;
-	};
-};
-
-&cpu {
-	cpu-supply = <&vcpu>;
-	operating-points = <
-		/* kHz    uV */
-		1000000 1325000
-	>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	/* There are two regulators on the board. One is accessible via I2C,
-	 * with buck1 providing SoC power (set up by bootloader to 1.325V or
-	 * less depending on leakage value in OTP), and buck2 likely used for
-	 * DRAM (providing 1.35V). The other regulator on the opposite side
-	 * of the board is probably supplying SDIO and NAND fixed voltages. */
-	regulator@19 {
-		compatible = "marvell,88pg868";
-		reg = <0x19>;
-
-		vcpu: buck1 {
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1325000>;
-		};
-	};
-};
-
-/* Fixed interface to on-board Marvell 8897 Wi-Fi/Bluetooth/NFC chip. */
-&sdhci0 {
-	keep-power-in-suspend;
-	non-removable;
-	status = "okay";
-};
-
-&uart0 {
-	/* RX/TX are routed to TP50/TP51 on the board. */
-	status = "okay";
-};
-
-/* The SoC is connected to on-board USB hub that in turn has one downstream
- * port wired to the on-board Steam Controller wireless receiver chip. */
-&usb_phy1 { status = "okay"; };
-
-&usb1 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&eth1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
deleted file mode 100644
index b2768f7a31852..0000000000000
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ /dev/null
@@ -1,583 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 1500-mini (Berlin BG2CD) SoC
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * based on GPL'ed 2.6 kernel sources
- *  (c) Marvell International Ltd.
- */
-
-#include <dt-bindings/clock/berlin2.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	model = "Marvell Armada 1500-mini (BG2CD) SoC";
-	compatible = "marvell,berlin2cd", "marvell,berlin";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-
-			clocks = <&chip_clk CLKID_CPU>;
-			clock-latency = <100000>;
-			operating-points = <
-				/* kHz    uV */
-				800000  1200000
-				600000  1200000
-			>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	refclk: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	soc@f7000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&gic>;
-
-		ranges = <0 0xf7000000 0x1000000>;
-
-		sdhci0: mmc@ab0000 {
-			compatible = "mrvl,pxav3-mmc";
-			reg = <0xab0000 0x200>;
-			clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
-			clock-names = "io", "core";
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		l2: cache-controller@ac0000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xac0000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		snoop-control-unit@ad0000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0xad0000 0x100>;
-		};
-
-		gic: interrupt-controller@ad1000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-		};
-
-		global-timer@ad0200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0xad0200 0x20>;
-			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&chip_clk CLKID_TWD>;
-		};
-
-		local-timer@ad0600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&chip_clk CLKID_TWD>;
-		};
-
-		local-wdt@ad0620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0xad0620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&chip_clk CLKID_TWD>;
-		};
-
-		usb_phy0: usb-phy@b74000 {
-			compatible = "marvell,berlin2cd-usb-phy";
-			reg = <0xb74000 0x128>;
-			#phy-cells = <0>;
-			resets = <&chip_rst 0x178 23>;
-			status = "disabled";
-		};
-
-		usb_phy1: usb-phy@b78000 {
-			compatible = "marvell,berlin2cd-usb-phy";
-			reg = <0xb78000 0x128>;
-			#phy-cells = <0>;
-			resets = <&chip_rst 0x178 24>;
-			status = "disabled";
-		};
-
-		eth1: ethernet@b90000 {
-			compatible = "marvell,pxa168-eth";
-			reg = <0xb90000 0x10000>;
-			clocks = <&chip_clk CLKID_GETH1>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			/* set by bootloader */
-			local-mac-address = [00 00 00 00 00 00];
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy-connection-type = "mii";
-			phy-handle = <&ethphy1>;
-			status = "disabled";
-
-			ethphy1: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		eth0: ethernet@e50000 {
-			compatible = "marvell,pxa168-eth";
-			reg = <0xe50000 0x10000>;
-			clocks = <&chip_clk CLKID_GETH0>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			/* set by bootloader */
-			local-mac-address = [00 00 00 00 00 00];
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy-connection-type = "mii";
-			phy-handle = <&ethphy0>;
-			status = "disabled";
-
-			ethphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		apb@e80000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xe80000 0x10000>;
-			interrupt-parent = <&aic>;
-
-			gpio0: gpio@400 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0400 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porta: gpio-port@0 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <0>;
-				};
-			};
-
-			gpio1: gpio@800 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0800 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portb: gpio-port@1 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <1>;
-				};
-			};
-
-			gpio2: gpio@c00 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0c00 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portc: gpio-port@2 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <2>;
-				};
-			};
-
-			gpio3: gpio@1000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x1000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portd: gpio-port@3 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <3>;
-				};
-			};
-
-			i2c0: i2c@1400 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x1400 0x100>;
-				interrupts = <16>;
-				clocks = <&chip_clk CLKID_CFG>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@1800 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x1800 0x100>;
-				interrupts = <17>;
-				clocks = <&chip_clk CLKID_CFG>;
-				status = "disabled";
-			};
-
-			spi0: spi@1c00 {
-				compatible = "snps,dw-apb-ssi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x1c00 0x100>;
-				interrupts = <4>;
-				clocks = <&chip_clk CLKID_CFG>;
-				status = "disabled";
-			};
-
-			wdt4: watchdog@2000 {
-				compatible = "snps,dw-wdt";
-				reg = <0x2000 0x100>;
-				clocks = <&chip_clk CLKID_CFG>;
-				interrupts = <5>;
-				status = "disabled";
-			};
-
-			wdt5: watchdog@2400 {
-				compatible = "snps,dw-wdt";
-				reg = <0x2400 0x100>;
-				clocks = <&chip_clk CLKID_CFG>;
-				interrupts = <6>;
-				status = "disabled";
-			};
-
-			wdt6: watchdog@2800 {
-				compatible = "snps,dw-wdt";
-				reg = <0x2800 0x100>;
-				clocks = <&chip_clk CLKID_CFG>;
-				interrupts = <7>;
-				status = "disabled";
-			};
-
-			timer0: timer@2c00 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c00 0x14>;
-				interrupts = <8>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "okay";
-			};
-
-			timer1: timer@2c14 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c14 0x14>;
-				interrupts = <9>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "okay";
-			};
-
-			timer2: timer@2c28 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c28 0x14>;
-				interrupts = <10>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer3: timer@2c3c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c3c 0x14>;
-				interrupts = <11>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer4: timer@2c50 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c50 0x14>;
-				interrupts = <12>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer5: timer@2c64 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c64 0x14>;
-				interrupts = <13>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer6: timer@2c78 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c78 0x14>;
-				interrupts = <14>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer7: timer@2c8c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c8c 0x14>;
-				interrupts = <15>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			aic: interrupt-controller@3000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0x3000 0xc00>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		chip: chip-control@ea0000 {
-			compatible = "simple-mfd", "syscon";
-			reg = <0xea0000 0x400>;
-
-			chip_clk: clock {
-				compatible = "marvell,berlin2-clk";
-				#clock-cells = <1>;
-				clocks = <&refclk>;
-				clock-names = "refclk";
-			};
-
-			soc_pinctrl: pin-controller {
-				compatible = "marvell,berlin2cd-soc-pinctrl";
-
-				uart0_pmux: uart0-pmux {
-					groups = "G6";
-					function = "uart0";
-				};
-			};
-
-			chip_rst: reset {
-				compatible = "marvell,berlin2-reset";
-				#reset-cells = <2>;
-			};
-		};
-
-		usb0: usb@ed0000 {
-			compatible = "chipidea,usb2";
-			reg = <0xed0000 0x200>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip_clk CLKID_USB0>;
-			phys = <&usb_phy0>;
-			phy-names = "usb-phy";
-			status = "disabled";
-		};
-
-		usb1: usb@ee0000 {
-			compatible = "chipidea,usb2";
-			reg = <0xee0000 0x200>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip_clk CLKID_USB1>;
-			phys = <&usb_phy1>;
-			phy-names = "usb-phy";
-			status = "disabled";
-		};
-
-		pwm: pwm@f20000 {
-			compatible = "marvell,berlin-pwm";
-			reg = <0xf20000 0x40>;
-			clocks = <&chip_clk CLKID_CFG>;
-			#pwm-cells = <3>;
-		};
-
-		apb@fc0000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xfc0000 0x10000>;
-			interrupt-parent = <&sic>;
-
-			wdt0: watchdog@1000 {
-				compatible = "snps,dw-wdt";
-				reg = <0x1000 0x100>;
-				clocks = <&refclk>;
-				interrupts = <0>;
-			};
-
-			wdt1: watchdog@2000 {
-				compatible = "snps,dw-wdt";
-				reg = <0x2000 0x100>;
-				clocks = <&refclk>;
-				interrupts = <1>;
-				status = "disabled";
-			};
-
-			wdt2: watchdog@3000 {
-				compatible = "snps,dw-wdt";
-				reg = <0x3000 0x100>;
-				clocks = <&refclk>;
-				interrupts = <2>;
-				status = "disabled";
-			};
-
-			sm_gpio1: gpio@5000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x5000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portf: gpio-port@5 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <8>;
-					reg = <0>;
-				};
-			};
-
-			spi1: spi@6000 {
-				compatible = "snps,dw-apb-ssi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x6000 0x100>;
-				clocks = <&refclk>;
-				interrupts = <5>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@7000 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x7000 0x100>;
-				interrupts = <6>;
-				clocks = <&refclk>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@8000 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x8000 0x100>;
-				interrupts = <7>;
-				clocks = <&refclk>;
-				status = "disabled";
-			};
-
-			sm_gpio0: gpio@c000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0xc000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porte: gpio-port@4 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <8>;
-					reg = <0>;
-				};
-			};
-
-			uart0: serial@9000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x9000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <8>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&uart0_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart1: serial@a000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xa000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <9>;
-				clocks = <&refclk>;
-				status = "disabled";
-			};
-
-			uart2: serial@b000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xb000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <10>;
-				clocks = <&refclk>;
-				status = "disabled";
-			};
-
-			sysctrl: system-controller@d000 {
-				compatible = "simple-mfd", "syscon";
-				reg = <0xd000 0x100>;
-
-				sys_pinctrl: pin-controller {
-					compatible = "marvell,berlin2cd-system-pinctrl";
-				};
-
-				adc: adc {
-					compatible = "marvell,berlin2-adc";
-					interrupts = <12>, <14>;
-					interrupt-names = "adc", "tsen";
-				};
-			};
-
-			sic: interrupt-controller@e000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0xe000 0x400>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
deleted file mode 100644
index c162f98cb8e86..0000000000000
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "berlin2q.dtsi"
-
-/ {
-	model = "Marvell BG2-Q DMP";
-	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator_usb0 {
-			compatible = "regulator-fixed";
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb1_vbus: regulator_usb1 {
-			compatible = "regulator-fixed";
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb2_vbus: regulator_usb2 {
-			compatible = "regulator-fixed";
-			regulator-name = "usb2_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_sdio1_vmmc: regulator_sdio1_vmmc {
-			compatible = "regulator-fixed";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-name = "sdio1_vmmc";
-			enable-active-high;
-			regulator-boot-on;
-			gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
-		};
-
-		reg_sdio1_vqmmc: regulator_sido1_vqmmc {
-			compatible = "regulator-gpio";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-name = "sdio1_vqmmc";
-			regulator-type = "voltage";
-			enable-active-high;
-			gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
-			states = <3300000 0x1
-				  1800000 0x0>;
-		};
-	};
-};
-
-&soc_pinctrl {
-	sd1gpio_pmux: sd1pwr-pmux {
-		groups = "G23", "G32";
-		function = "gpio";
-	};
-};
-
-&sdhci1 {
-	vmmc-supply = <&reg_sdio1_vmmc>;
-	vqmmc-supply = <&reg_sdio1_vqmmc>;
-	cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
-	pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci2 {
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb_phy0 {
-	status = "okay";
-};
-
-&usb_phy2 {
-	status = "okay";
-};
-
-&usb0 {
-	vbus-supply = <&reg_usb0_vbus>;
-	status = "okay";
-};
-
-&usb2 {
-	vbus-supply = <&reg_usb2_vbus>;
-	status = "okay";
-};
-
-&eth0 {
-	status = "okay";
-};
-
-&sata0 {
-	status = "okay";
-};
-
-&sata_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
deleted file mode 100644
index 6edaefa617a58..0000000000000
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ /dev/null
@@ -1,666 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
- */
-
-#include <dt-bindings/clock/berlin2q.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
-	compatible = "marvell,berlin2q", "marvell,berlin";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,berlin-smp";
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-
-			clocks = <&chip_clk CLKID_CPU>;
-			clock-latency = <100000>;
-			/* Can be modified by the bootloader */
-			operating-points = <
-				/* kHz    uV */
-				1200000 1200000
-				1000000 1200000
-				800000  1200000
-				600000  1200000
-			>;
-		};
-
-		cpu1: cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <1>;
-
-			clocks = <&chip_clk CLKID_CPU>;
-			clock-latency = <100000>;
-			/* Can be modified by the bootloader */
-			operating-points = <
-				/* kHz    uV */
-				1200000 1200000
-				1000000 1200000
-				800000  1200000
-				600000  1200000
-			>;
-		};
-
-		cpu2: cpu@2 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <2>;
-
-			clocks = <&chip_clk CLKID_CPU>;
-			clock-latency = <100000>;
-			/* Can be modified by the bootloader */
-			operating-points = <
-				/* kHz    uV */
-				1200000 1200000
-				1000000 1200000
-				800000  1200000
-				600000  1200000
-			>;
-		};
-
-		cpu3: cpu@3 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <3>;
-
-			clocks = <&chip_clk CLKID_CPU>;
-			clock-latency = <100000>;
-			/* Can be modified by the bootloader */
-			operating-points = <
-				/* kHz    uV */
-				1200000 1200000
-				1000000 1200000
-				800000  1200000
-				600000  1200000
-			>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>,
-				     <&cpu1>,
-				     <&cpu2>,
-				     <&cpu3>;
-	};
-
-	refclk: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	soc@f7000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0 0xf7000000 0x1000000>;
-		interrupt-parent = <&gic>;
-
-		sdhci0: mmc@ab0000 {
-			compatible = "mrvl,pxav3-mmc";
-			reg = <0xab0000 0x200>;
-			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
-			clock-names = "io", "core";
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		sdhci1: mmc@ab0800 {
-			compatible = "mrvl,pxav3-mmc";
-			reg = <0xab0800 0x200>;
-			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
-			clock-names = "io", "core";
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		sdhci2: mmc@ab1000 {
-			compatible = "mrvl,pxav3-mmc";
-			reg = <0xab1000 0x200>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_SDIO>;
-			clock-names = "io", "core";
-			status = "disabled";
-		};
-
-		l2: cache-controller@ac0000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xac0000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			arm,data-latency = <2 2 2>;
-			arm,tag-latency = <2 2 2>;
-		};
-
-		scu: snoop-control-unit@ad0000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0xad0000 0x58>;
-		};
-
-		local-timer@ad0600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xad0600 0x20>;
-			clocks = <&chip_clk CLKID_TWD>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-		};
-
-		gic: interrupt-controller@ad1000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0xad1000 0x1000>, <0xad0100 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-		};
-
-		usb_phy2: phy@a2f400 {
-			compatible = "marvell,berlin2cd-usb-phy";
-			reg = <0xa2f400 0x128>;
-			#phy-cells = <0>;
-			resets = <&chip_rst 0x104 14>;
-			status = "disabled";
-		};
-
-		usb2: usb@a30000 {
-			compatible = "chipidea,usb2";
-			reg = <0xa30000 0x10000>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip_clk CLKID_USB2>;
-			phys = <&usb_phy2>;
-			phy-names = "usb-phy";
-			status = "disabled";
-		};
-
-		usb_phy0: phy@b74000 {
-			compatible = "marvell,berlin2cd-usb-phy";
-			reg = <0xb74000 0x128>;
-			#phy-cells = <0>;
-			resets = <&chip_rst 0x104 12>;
-			status = "disabled";
-		};
-
-		usb_phy1: phy@b78000 {
-			compatible = "marvell,berlin2cd-usb-phy";
-			reg = <0xb78000 0x128>;
-			#phy-cells = <0>;
-			resets = <&chip_rst 0x104 13>;
-			status = "disabled";
-		};
-
-		eth0: ethernet@b90000 {
-			compatible = "marvell,pxa168-eth";
-			reg = <0xb90000 0x10000>;
-			clocks = <&chip_clk CLKID_GETH0>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			/* set by bootloader */
-			local-mac-address = [00 00 00 00 00 00];
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy-connection-type = "mii";
-			phy-handle = <&ethphy0>;
-			status = "disabled";
-
-			ethphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		cpu-ctrl@dd0000 {
-			compatible = "marvell,berlin-cpu-ctrl";
-			reg = <0xdd0000 0x10000>;
-		};
-
-		apb@e80000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xe80000 0x10000>;
-			interrupt-parent = <&aic>;
-
-			gpio0: gpio@400 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0400 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porta: gpio-port@0 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <0>;
-				};
-			};
-
-			gpio1: gpio@800 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0800 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portb: gpio-port@1 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <1>;
-				};
-			};
-
-			gpio2: gpio@c00 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0c00 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portc: gpio-port@2 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <2>;
-				};
-			};
-
-			gpio3: gpio@1000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x1000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portd: gpio-port@3 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <3>;
-				};
-			};
-
-			i2c0: i2c@1400 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x1400 0x100>;
-				interrupts = <4>;
-				clocks = <&chip_clk CLKID_CFG>;
-				pinctrl-0 = <&twsi0_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			i2c1: i2c@1800 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x1800 0x100>;
-				interrupts = <5>;
-				clocks = <&chip_clk CLKID_CFG>;
-				pinctrl-0 = <&twsi1_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			timer0: timer@2c00 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c00 0x14>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				interrupts = <8>;
-			};
-
-			timer1: timer@2c14 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c14 0x14>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-			};
-
-			timer2: timer@2c28 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c28 0x14>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer3: timer@2c3c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c3c 0x14>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer4: timer@2c50 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c50 0x14>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer5: timer@2c64 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c64 0x14>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer6: timer@2c78 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c78 0x14>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer7: timer@2c8c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c8c 0x14>;
-				clocks = <&chip_clk CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			aic: interrupt-controller@3800 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0x3800 0x30>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		chip: chip-control@ea0000 {
-			compatible = "simple-mfd", "syscon";
-			reg = <0xea0000 0x400>, <0xdd0170 0x10>;
-
-			chip_clk: clock {
-				compatible = "marvell,berlin2q-clk";
-				#clock-cells = <1>;
-				clocks = <&refclk>;
-				clock-names = "refclk";
-			};
-
-			soc_pinctrl: pin-controller {
-				compatible = "marvell,berlin2q-soc-pinctrl";
-
-				sd1_pmux: sd1-pmux {
-					groups = "G31";
-					function = "sd1";
-				};
-
-				twsi0_pmux: twsi0-pmux {
-					groups = "G6";
-					function = "twsi0";
-				};
-
-				twsi1_pmux: twsi1-pmux {
-					groups = "G7";
-					function = "twsi1";
-				};
-			};
-
-			chip_rst: reset {
-				compatible = "marvell,berlin2-reset";
-				#reset-cells = <2>;
-			};
-		};
-
-		ahci: sata@e90000 {
-			compatible = "marvell,berlin2q-ahci", "generic-ahci";
-			reg = <0xe90000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip_clk CLKID_SATA>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			sata0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata_phy 0>;
-				status = "disabled";
-			};
-
-			sata1: sata-port@1 {
-				reg = <1>;
-				phys = <&sata_phy 1>;
-				status = "disabled";
-			};
-		};
-
-		sata_phy: phy@e900a0 {
-			compatible = "marvell,berlin2q-sata-phy";
-			reg = <0xe900a0 0x200>;
-			clocks = <&chip_clk CLKID_SATA>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#phy-cells = <1>;
-			status = "disabled";
-
-			sata-phy@0 {
-				reg = <0>;
-			};
-
-			sata-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		usb0: usb@ed0000 {
-			compatible = "chipidea,usb2";
-			reg = <0xed0000 0x10000>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip_clk CLKID_USB0>;
-			phys = <&usb_phy0>;
-			phy-names = "usb-phy";
-			status = "disabled";
-		};
-
-		usb1: usb@ee0000 {
-			compatible = "chipidea,usb2";
-			reg = <0xee0000 0x10000>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip_clk CLKID_USB1>;
-			phys = <&usb_phy1>;
-			phy-names = "usb-phy";
-			status = "disabled";
-		};
-
-		pwm: pwm@f20000 {
-			compatible = "marvell,berlin-pwm";
-			reg = <0xf20000 0x40>;
-			clocks = <&chip_clk CLKID_CFG>;
-			#pwm-cells = <3>;
-		};
-
-		apb@fc0000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xfc0000 0x10000>;
-			interrupt-parent = <&sic>;
-
-			wdt0: watchdog@1000 {
-				compatible = "snps,dw-wdt";
-				reg = <0x1000 0x100>;
-				clocks = <&refclk>;
-				interrupts = <0>;
-			};
-
-			wdt1: watchdog@2000 {
-				compatible = "snps,dw-wdt";
-				reg = <0x2000 0x100>;
-				clocks = <&refclk>;
-				interrupts = <1>;
-			};
-
-			wdt2: watchdog@3000 {
-				compatible = "snps,dw-wdt";
-				reg = <0x3000 0x100>;
-				clocks = <&refclk>;
-				interrupts = <2>;
-			};
-
-			sm_gpio1: gpio@5000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x5000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portf: gpio-port@5 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <32>;
-					reg = <0>;
-				};
-			};
-
-			i2c2: i2c@7000 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x7000 0x100>;
-				interrupts = <6>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&twsi2_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			i2c3: i2c@8000 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x8000 0x100>;
-				interrupts = <7>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&twsi3_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart0: serial@9000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x9000 0x100>;
-				interrupts = <8>;
-				clocks = <&refclk>;
-				reg-shift = <2>;
-				pinctrl-0 = <&uart0_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart1: serial@a000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xa000 0x100>;
-				interrupts = <9>;
-				clocks = <&refclk>;
-				reg-shift = <2>;
-				pinctrl-0 = <&uart1_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			sm_gpio0: gpio@c000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0xc000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porte: gpio-port@4 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					ngpios = <32>;
-					reg = <0>;
-				};
-			};
-
-			sysctrl: pin-controller@d000 {
-				compatible = "simple-mfd", "syscon";
-				reg = <0xd000 0x100>;
-
-				sys_pinctrl: pin-controller {
-					compatible = "marvell,berlin2q-system-pinctrl";
-
-					uart0_pmux: uart0-pmux {
-						groups = "GSM12";
-						function = "uart0";
-					};
-
-					uart1_pmux: uart1-pmux {
-						groups = "GSM14";
-						function = "uart1";
-					};
-
-					twsi2_pmux: twsi2-pmux {
-						groups = "GSM13";
-						function = "twsi2";
-					};
-
-					twsi3_pmux: twsi3-pmux {
-						groups = "GSM14";
-						function = "twsi3";
-					};
-				};
-
-				adc: adc {
-					compatible = "marvell,berlin2-adc";
-					interrupts = <12>, <14>;
-					interrupt-names = "adc", "tsen";
-				};
-			};
-
-			sic: interrupt-controller@e000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0xe000 0x30>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile
new file mode 100644
index 0000000000000..95b0ef2a42152
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/Makefile
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+# Enables support for device-tree overlays
+DTC_FLAGS_bcm2835-rpi-b := -@
+DTC_FLAGS_bcm2835-rpi-a := -@
+DTC_FLAGS_bcm2835-rpi-b-rev2 := -@
+DTC_FLAGS_bcm2835-rpi-b-plus := -@
+DTC_FLAGS_bcm2835-rpi-a-plus := -@
+DTC_FLAGS_bcm2835-rpi-cm1-io1 := -@
+DTC_FLAGS_bcm2836-rpi-2-b := -@
+DTC_FLAGS_bcm2837-rpi-3-a-plus := -@
+DTC_FLAGS_bcm2837-rpi-3-b := -@
+DTC_FLAGS_bcm2837-rpi-3-b-plus := -@
+DTC_FLAGS_bcm2837-rpi-cm3-io3 := -@
+DTC_FLAGS_bcm2837-rpi-zero-2-w := -@
+DTC_FLAGS_bcm2711-rpi-400 := -@
+DTC_FLAGS_bcm2711-rpi-4-b := -@
+DTC_FLAGS_bcm2711-rpi-cm4-io := -@
+DTC_FLAGS_bcm2835-rpi-zero := -@
+DTC_FLAGS_bcm2835-rpi-zero-w := -@
+dtb-$(CONFIG_ARCH_BCM2835) += \
+	bcm2835-rpi-b.dtb \
+	bcm2835-rpi-a.dtb \
+	bcm2835-rpi-b-rev2.dtb \
+	bcm2835-rpi-b-plus.dtb \
+	bcm2835-rpi-a-plus.dtb \
+	bcm2835-rpi-cm1-io1.dtb \
+	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-3-a-plus.dtb \
+	bcm2837-rpi-3-b.dtb \
+	bcm2837-rpi-3-b-plus.dtb \
+	bcm2837-rpi-cm3-io3.dtb \
+	bcm2837-rpi-zero-2-w.dtb \
+	bcm2711-rpi-400.dtb \
+	bcm2711-rpi-4-b.dtb \
+	bcm2711-rpi-cm4-io.dtb \
+	bcm2835-rpi-zero.dtb \
+	bcm2835-rpi-zero-w.dtb
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+	bcm947622.dtb \
+	bcm963138.dtb \
+	bcm963138dvt.dtb \
+	bcm963148.dtb \
+	bcm963178.dtb \
+	bcm96756.dtb \
+	bcm96846.dtb \
+	bcm96855.dtb \
+	bcm96878.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += \
+	bcm4708-asus-rt-ac56u.dtb \
+	bcm4708-asus-rt-ac68u.dtb \
+	bcm4708-buffalo-wzr-1750dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp2.dtb \
+	bcm4708-linksys-ea6300-v1.dtb \
+	bcm4708-linksys-ea6500-v2.dtb \
+	bcm4708-luxul-xap-1510.dtb \
+	bcm4708-luxul-xwc-1000.dtb \
+	bcm4708-netgear-r6250.dtb \
+	bcm4708-netgear-r6300-v2.dtb \
+	bcm4708-smartrg-sr400ac.dtb \
+	bcm47081-asus-rt-n18u.dtb \
+	bcm47081-buffalo-wzr-600dhp2.dtb \
+	bcm47081-buffalo-wzr-900dhp.dtb \
+	bcm47081-luxul-xap-1410.dtb \
+	bcm47081-luxul-xwr-1200.dtb \
+	bcm47081-tplink-archer-c5-v2.dtb \
+	bcm4709-asus-rt-ac87u.dtb \
+	bcm4709-buffalo-wxr-1900dhp.dtb \
+	bcm4709-linksys-ea9200.dtb \
+	bcm4709-netgear-r7000.dtb \
+	bcm4709-netgear-r8000.dtb \
+	bcm4709-tplink-archer-c9-v1.dtb \
+	bcm47094-asus-rt-ac88u.dtb \
+	bcm47094-dlink-dir-885l.dtb \
+	bcm47094-dlink-dir-890l.dtb \
+	bcm47094-linksys-panamera.dtb \
+	bcm47094-luxul-abr-4500.dtb \
+	bcm47094-luxul-xap-1610.dtb \
+	bcm47094-luxul-xbr-4500.dtb \
+	bcm47094-luxul-xwc-2000.dtb \
+	bcm47094-luxul-xwr-3100.dtb \
+	bcm47094-luxul-xwr-3150-v1.dtb \
+	bcm47094-netgear-r8500.dtb \
+	bcm47094-phicomm-k3.dtb \
+	bcm53015-meraki-mr26.dtb \
+	bcm53016-dlink-dwl-8610ap.dtb \
+	bcm53016-meraki-mr32.dtb \
+	bcm94708.dtb \
+	bcm94709.dtb \
+	bcm953012er.dtb \
+	bcm953012hr.dtb \
+	bcm953012k.dtb
+dtb-$(CONFIG_ARCH_BCM_53573) += \
+	bcm47189-luxul-xap-1440.dtb \
+	bcm47189-luxul-xap-810.dtb \
+	bcm47189-tenda-ac9.dtb \
+	bcm947189acdbmr.dtb
+dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+	bcm911360_entphn.dtb \
+	bcm911360k.dtb \
+	bcm958300k.dtb \
+	bcm958305k.dtb
+dtb-$(CONFIG_ARCH_BCM_HR2) += \
+	bcm53340-ubnt-unifi-switch8.dtb
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
+	bcm28155-ap.dtb \
+	bcm21664-garnet.dtb \
+	bcm23550-sparrow.dtb
+dtb-$(CONFIG_ARCH_BCM_NSP) += \
+	bcm958522er.dtb \
+	bcm958525er.dtb \
+	bcm958525xmc.dtb \
+	bcm958622hr.dtb \
+	bcm958623hr.dtb \
+	bcm958625-meraki-mx64.dtb \
+	bcm958625-meraki-mx64-a0.dtb \
+	bcm958625-meraki-mx64w.dtb \
+	bcm958625-meraki-mx64w-a0.dtb \
+	bcm958625-meraki-mx65.dtb \
+	bcm958625-meraki-mx65w.dtb \
+	bcm958625hr.dtb \
+	bcm988312hr.dtb \
+	bcm958625k.dtb
+dtb-$(CONFIG_ARCH_BRCMSTB) += \
+	bcm7445-bcm97445svmb.dtb
diff --git a/arch/arm/boot/dts/broadcom/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus-clock.dtsi
new file mode 100644
index 0000000000000..52f91a12a99aa
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus-clock.dtsi
@@ -0,0 +1,133 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+clocks {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	osc: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	/* Cygnus ARM PLL */
+	armpll: armpll@19000000 {
+		#clock-cells = <0>;
+		compatible = "brcm,cygnus-armpll";
+		clocks = <&osc>;
+		reg = <0x19000000 0x1000>;
+	};
+
+	/* peripheral clock for system timer */
+	periph_clk: arm_periph_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&armpll>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	/* APB bus clock */
+	apb_clk: apb_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&armpll>;
+		clock-div = <4>;
+		clock-mult = <1>;
+	};
+
+	genpll: genpll@301d000 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-genpll";
+		reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+				     "enet_sw", "audio_125", "can";
+	};
+
+	/* always 1/2 of the axi21 clock */
+	axi41_clk: axi41_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll 1>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	/* always 1/4 of the axi21 clock */
+	axi81_clk: axi81_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll 1>;
+		clock-div = <4>;
+		clock-mult = <1>;
+	};
+
+	lcpll0: lcpll0@301d02c {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-lcpll0";
+		reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll0", "pcie_phy", "ddr_phy", "sdio",
+				     "usb_phy", "smart_card", "ch5";
+	};
+
+	mipipll: mipipll@180a9800 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-mipipll";
+		reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "mipipll", "ch0_unused", "ch1_lcd",
+				     "ch2_v3d", "ch3_unused", "ch4_unused",
+				     "ch5_unused";
+	};
+
+	asiu_clks: asiu_clks@301d048 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-asiu-clk";
+		reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
+
+		clocks = <&osc>;
+		clock-output-names = "keypad", "adc/touch", "pwm";
+	};
+
+	audiopll: audiopll@180aeb00 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-audiopll";
+		reg = <0x180aeb00 0x68>;
+		clocks = <&osc>;
+		clock-output-names = "audiopll", "ch0_audio",
+					"ch1_audio", "ch2_audio";
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
new file mode 100644
index 0000000000000..f9f79ed825181
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
@@ -0,0 +1,623 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-cygnus.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,cygnus";
+	model = "Broadcom Cygnus SoC";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &eth0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+
+	/include/ "bcm-cygnus-clock.dtsi"
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	core@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		otp: otp@301c800 {
+			compatible = "brcm,ocotp";
+			reg = <0x0301c800 0x2c>;
+			brcm,ocotp-size = <2048>;
+			status = "disabled";
+		};
+
+		pcie_phy: pcie_phy@301d0a0 {
+			compatible = "brcm,cygnus-pcie-phy";
+			reg = <0x0301d0a0 0x14>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcie0_phy: pcie-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			pcie1_phy: pcie-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		pinctrl: pinctrl@301d0c8 {
+			compatible = "brcm,cygnus-pinmux";
+			reg = <0x0301d0c8 0x30>,
+			      <0x0301d24c 0x2c>;
+
+			spi_0: spi_0 {
+				function = "spi0";
+				groups = "spi0_grp";
+			};
+
+			spi_1: spi_1 {
+				function = "spi1";
+				groups = "spi1_grp";
+			};
+
+			spi_2: spi_2 {
+				function = "spi2";
+				groups = "spi2_grp";
+			};
+		};
+
+		mailbox: mailbox@3024024 {
+			compatible = "brcm,iproc-mailbox";
+			reg = <0x03024024 0x40>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			#mbox-cells = <1>;
+		};
+
+		gpio_crmu: gpio@3024800 {
+			compatible = "brcm,cygnus-crmu-gpio";
+			reg = <0x03024800 0x50>,
+			      <0x03024008 0x18>;
+			ngpios = <6>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&mailbox>;
+			interrupts = <0>;
+		};
+
+		mdio: mdio@18002000 {
+			compatible = "brcm,iproc-mdio";
+			reg = <0x18002000 0x8>;
+			#size-cells = <0>;
+			#address-cells = <1>;
+			status = "disabled";
+
+			gphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			gphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		switch: switch@18007000 {
+			compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
+			reg = <0x18007000 0x1000>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					phy-handle = <&gphy0>;
+					phy-mode = "rgmii";
+				};
+
+				port@1 {
+					reg = <1>;
+					phy-handle = <&gphy1>;
+					phy-mode = "rgmii";
+				};
+
+				port@8 {
+					reg = <8>;
+					label = "cpu";
+					ethernet = <&eth0>;
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
+		i2c0: i2c@18008000 {
+			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+			reg = <0x18008000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		wdt0: wdt@18009000 {
+			compatible = "arm,sp805" , "arm,primecell";
+			reg = <0x18009000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		gpio_ccm: gpio@1800a000 {
+			compatible = "brcm,cygnus-ccm-gpio";
+			reg = <0x1800a000 0x50>,
+			      <0x0301d164 0x20>;
+			ngpios = <24>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+		};
+
+		i2c1: i2c@1800b000 {
+			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+			reg = <0x1800b000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		pcie0: pcie@18012000 {
+			compatible = "brcm,iproc-pcie";
+			reg = <0x18012000 0x1000>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+
+			linux,pci-domain = <0>;
+
+			bus-range = <0x00 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000>,
+				 <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pcie-phy";
+
+			status = "disabled";
+
+			msi-parent = <&msi0>;
+			msi0: msi {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie1: pcie@18013000 {
+			compatible = "brcm,iproc-pcie";
+			reg = <0x18013000 0x1000>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+
+			linux,pci-domain = <1>;
+
+			bus-range = <0x00 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000>,
+				 <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pcie-phy";
+
+			status = "disabled";
+
+			msi-parent = <&msi1>;
+			msi1: msi {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		dma0: dma@18018000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x18018000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@18020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18020000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart1: serial@18021000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18021000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart2: serial@18022000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18022000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart3: serial@18023000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18023000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		spi0: spi@18028000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x18028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_0>;
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		spi1: spi@18029000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x18029000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_1>;
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		spi2: spi@1802a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1802a000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_2>;
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		rng: rng@18032000 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x18032000 0x28>;
+		};
+
+		sdhci0: sdhci@18041000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x18041000 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+			bus-width = <4>;
+			sdhci,auto-cmd12;
+			status = "disabled";
+		};
+
+		eth0: ethernet@18042000 {
+			compatible = "brcm,amac";
+			reg = <0x18042000 0x1000>,
+			      <0x18110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@18043000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x18043000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+			bus-width = <4>;
+			sdhci,auto-cmd12;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@18046000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
+			      <0x18046f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		ehci0: usb@18048000 {
+			compatible = "generic-ehci";
+			reg = <0x18048000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ohci0: usb@18048800 {
+			compatible = "generic-ohci";
+			reg = <0x18048800 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		clcd: clcd@180a0000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x180a0000 0x1000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			clocks = <&axi41_clk>, <&apb_clk>;
+			clock-names = "clcdclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		v3d: v3d@180a2000 {
+			compatible = "brcm,cygnus-v3d";
+			reg = <0x180a2000 0x1000>;
+			clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+			clock-names = "v3d_clk";
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		vc4: gpu {
+			compatible = "brcm,cygnus-vc4";
+		};
+
+		gpio_asiu: gpio@180a5000 {
+			compatible = "brcm,cygnus-asiu-gpio";
+			reg = <0x180a5000 0x668>;
+			ngpios = <146>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			interrupt-controller;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 42 1>,
+					<&pinctrl 1 44 3>,
+					<&pinctrl 4 48 1>,
+					<&pinctrl 5 50 3>,
+					<&pinctrl 8 126 1>,
+					<&pinctrl 9 155 1>,
+					<&pinctrl 10 152 1>,
+					<&pinctrl 11 154 1>,
+					<&pinctrl 12 153 1>,
+					<&pinctrl 13 127 3>,
+					<&pinctrl 16 140 1>,
+					<&pinctrl 17 145 7>,
+					<&pinctrl 24 130 10>,
+					<&pinctrl 34 141 4>,
+					<&pinctrl 38 54 1>,
+					<&pinctrl 39 56 3>,
+					<&pinctrl 42 60 3>,
+					<&pinctrl 45 64 3>,
+					<&pinctrl 48 68 2>,
+					<&pinctrl 50 84 6>,
+					<&pinctrl 56 94 6>,
+					<&pinctrl 62 72 1>,
+					<&pinctrl 63 70 1>,
+					<&pinctrl 64 80 1>,
+					<&pinctrl 65 74 3>,
+					<&pinctrl 68 78 1>,
+					<&pinctrl 69 82 1>,
+					<&pinctrl 70 156 17>,
+					<&pinctrl 87 104 12>,
+					<&pinctrl 99 102 2>,
+					<&pinctrl 101 90 4>,
+					<&pinctrl 105 116 6>,
+					<&pinctrl 111 100 2>,
+					<&pinctrl 113 122 4>,
+					<&pinctrl 123 11 1>,
+					<&pinctrl 124 38 4>,
+					<&pinctrl 128 43 1>,
+					<&pinctrl 129 47 1>,
+					<&pinctrl 130 49 1>,
+					<&pinctrl 131 53 1>,
+					<&pinctrl 132 55 1>,
+					<&pinctrl 133 59 1>,
+					<&pinctrl 134 63 1>,
+					<&pinctrl 135 67 1>,
+					<&pinctrl 136 71 1>,
+					<&pinctrl 137 73 1>,
+					<&pinctrl 138 77 1>,
+					<&pinctrl 139 79 1>,
+					<&pinctrl 140 81 1>,
+					<&pinctrl 141 83 1>,
+					<&pinctrl 142 10 1>;
+		};
+
+		ts_adc_syscon: ts_adc_syscon@180a6000 {
+			compatible = "brcm,iproc-ts-adc-syscon", "syscon";
+			reg = <0x180a6000 0xc30>;
+		};
+
+		touchscreen: touchscreen@180a6000 {
+			compatible = "brcm,iproc-touchscreen";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_syscon = <&ts_adc_syscon>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+			clock-names = "tsc_clk";
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		adc: adc@180a6000 {
+			compatible = "brcm,iproc-static-adc";
+			#io-channel-cells = <1>;
+			adc-syscon = <&ts_adc_syscon>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+			clock-names = "tsc_clk";
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pwm: pwm@180aa500 {
+			compatible = "brcm,kona-pwm";
+			reg = <0x180aa500 0xc4>;
+			#pwm-cells = <3>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
+			status = "disabled";
+		};
+
+		keypad: keypad@180ac000 {
+			compatible = "brcm,bcm-keypad";
+			reg = <0x180ac000 0x14c>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>;
+			clock-names = "peri_clk";
+			clock-frequency = <31250>;
+			pull-up-enabled;
+			col-debounce-filter-period = <0>;
+			status-debounce-filter-period = <0>;
+			row-output-enabled;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
new file mode 100644
index 0000000000000..33e6ba63a1eee
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
@@ -0,0 +1,368 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,hr2";
+	model = "Broadcom Hurricane 2 SoC";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	mpcore@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,hr2-armpll";
+			clocks = <&osc>;
+			reg = <0x0 0x1000>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x0011c40c>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@300 {
+			compatible = "ns16550a";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		uart1: serial@400 {
+			compatible = "ns16550a";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		dma@20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		amac0: ethernet@22000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x22000 0x1000>,
+			      <0x110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@26000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x26000 0x600>,
+			      <0x11b408 0x600>,
+			      <0x026f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		gpiob: gpio@30000 {
+			compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio";
+			reg = <0x30000 0x50>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <4>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@31000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x31000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		rng: rng@33000 {
+			compatible = "brcm,bcm-nsp-rng";
+			reg = <0x33000 0x14>;
+		};
+
+		qspi: spi@27200 {
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+			reg = <0x027200 0x184>,
+			      <0x027000 0x124>,
+			      <0x11c408 0x004>,
+			      <0x0273a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				    "intr_status_reg";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overhead",
+					  "mspi_done",
+					  "mspi_halted";
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* partitions defined in board DTS */
+		};
+
+		ccbtimer0: timer@34000 {
+			compatible = "arm,sp804";
+			reg = <0x34000 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ccbtimer1: timer@35000 {
+			compatible = "arm,sp804";
+			reg = <0x35000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c0: i2c@38000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x38000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+		};
+
+		watchdog: watchdog@39000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x39000 0x1000>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c1: i2c@3b000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x3b000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+		};
+	};
+
+	pflash: nor@20000000 {
+		compatible = "cfi-flash", "jedec-flash";
+		reg = <0x20000000 0x04000000>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* partitions defined in board DTS */
+	};
+
+	pcie0: pcie@18012000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18012000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+		status = "disabled";
+
+		msi-parent = <&msi0>;
+		msi0: msi {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	pcie1: pcie@18013000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18013000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <1>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+		status = "disabled";
+
+		msi-parent = <&msi1>;
+		msi1: msi {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
new file mode 100644
index 0000000000000..dae9c47ace761
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
@@ -0,0 +1,464 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+#include <dt-bindings/clock/bcm-nsp.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chipcommon-a-bus@18000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x00001000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@300 {
+			compatible = "ns16550";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			status = "disabled";
+		};
+
+		uart1: serial@400 {
+			compatible = "ns16550";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_uart1>;
+			status = "disabled";
+		};
+	};
+
+	mpcore-bus@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scu@20000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x20000 0x100>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			arm,shared-override;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			cache-level = <2>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map =
+			/* ChipCommon */
+			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Switch Register Access Block */
+			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 0 */
+			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 1 */
+			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 2 */
+			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 2.0 Controller */
+			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 3.0 Controller */
+			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 0 */
+			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 2 */
+			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 3 */
+			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* NAND Controller */
+			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon: chipcommon@0 {
+			reg = <0x00000000 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcie0: pcie@12000 {
+			reg = <0x00012000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		pcie1: pcie@13000 {
+			reg = <0x00013000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		pcie2: pcie@14000 {
+			reg = <0x00014000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		usb2: usb2@21000 {
+			reg = <0x00021000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			ehci: usb@21000 {
+				compatible = "generic-ehci";
+				reg = <0x00021000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ehci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ehci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+
+			ohci: usb@22000 {
+				compatible = "generic-ohci";
+				reg = <0x00022000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ohci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ohci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		usb3: usb3@23000 {
+			reg = <0x00023000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			xhci: usb@23000 {
+				compatible = "generic-xhci";
+				reg = <0x00023000 0x1000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy>;
+				phy-names = "usb";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				xhci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		gmac0: ethernet@24000 {
+			reg = <0x24000 0x800>;
+		};
+
+		gmac1: ethernet@25000 {
+			reg = <0x25000 0x800>;
+		};
+
+		gmac2: ethernet@26000 {
+			reg = <0x26000 0x800>;
+		};
+
+		gmac3: ethernet@27000 {
+			reg = <0x27000 0x800>;
+		};
+	};
+
+	pwm: pwm@18002000 {
+		compatible = "brcm,iproc-pwm";
+		reg = <0x18002000 0x28>;
+		clocks = <&osc>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	mdio: mdio@18003000 {
+		compatible = "brcm,iproc-mdio";
+		reg = <0x18003000 0x8>;
+		#size-cells = <0>;
+		#address-cells = <1>;
+	};
+
+	rng: rng@18004000 {
+		compatible = "brcm,bcm5301x-rng";
+		reg = <0x18004000 0x14>;
+	};
+
+	srab: ethernet-switch@18007000 {
+		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
+		reg = <0x18007000 0x1000>;
+
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				ethernet = <&gmac0>;
+			};
+
+			port@7 {
+				reg = <7>;
+				ethernet = <&gmac1>;
+			};
+
+			port@8 {
+				reg = <8>;
+				ethernet = <&gmac2>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	uart2: serial@18008000 {
+		compatible = "ns16550a";
+		reg = <0x18008000 0x20>;
+		clocks = <&iprocslow>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	dmu-bus@1800c000 {
+		compatible = "simple-bus";
+		ranges = <0 0x1800c000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cru-bus@100 {
+			compatible = "brcm,ns-cru", "simple-mfd";
+			reg = <0x100 0x1a4>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			usb2_phy: phy@164 {
+				compatible = "brcm,ns-usb2-phy";
+				reg = <0x164 0x4>;
+				brcm,syscon-clkset = <&cru_clkset>;
+				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+				clock-names = "phy-ref-clk";
+				#phy-cells = <0>;
+			};
+
+			cru_clkset: syscon@180 {
+				compatible = "brcm,cru-clkset", "syscon";
+				reg = <0x180 0x4>;
+			};
+
+			pinctrl: pinctrl@1c0 {
+				compatible = "brcm,bcm4708-pinmux";
+				reg = <0x1c0 0x24>;
+				reg-names = "cru_gpio_control";
+
+				spi-pins {
+					groups = "spi_grp";
+					function = "spi";
+				};
+
+				pinmux_i2c: i2c-pins {
+					groups = "i2c_grp";
+					function = "i2c";
+				};
+
+				pinmux_pwm: pwm-pins {
+					groups = "pwm0_grp", "pwm1_grp",
+						 "pwm2_grp", "pwm3_grp";
+					function = "pwm";
+				};
+
+				pinmux_uart1: uart1-pins {
+					groups = "uart1_grp";
+					function = "uart1";
+				};
+			};
+
+			thermal: thermal@2c0 {
+				compatible = "brcm,ns-thermal";
+				reg = <0x2c0 0x10>;
+				#thermal-sensor-cells = <0>;
+			};
+		};
+	};
+
+	nand_controller: nand-controller@18028000 {
+		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
+		reg-names = "nand", "iproc-idm", "iproc-ext";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		brcm,nand-has-wp;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			coefficients = <(-556) 418000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi
new file mode 100644
index 0000000000000..f2e941dbab103
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar Plus Ax stepping-specific bindings.
+ * Notable differences from B0+ are the secondary-boot-reg and
+ * lack of DMA coherency.
+ */
+
+&cpu1 {
+	secondary-boot-reg = <0xffff042c>;
+};
+
+&dma {
+	/delete-property/ dma-coherent;
+};
+
+&sdio {
+	/delete-property/ dma-coherent;
+};
+
+&amac0 {
+	/delete-property/ dma-coherent;
+};
+
+&amac1 {
+	/delete-property/ dma-coherent;
+};
+
+&amac2 {
+	/delete-property/ dma-coherent;
+};
+
+&ehci0 {
+	/delete-property/ dma-coherent;
+};
+
+&mailbox {
+	/delete-property/ dma-coherent;
+};
+
+&xhci {
+	/delete-property/ dma-coherent;
+};
+
+&ehci0 {
+	/delete-property/ dma-coherent;
+};
+
+&ohci0 {
+	/delete-property/ dma-coherent;
+};
+
+&i2c0 {
+	/delete-property/ dma-coherent;
+};
+
+&sata {
+	/delete-property/ dma-coherent;
+};
+
+&pcie0 {
+	/delete-property/ dma-coherent;
+};
+
+&pcie1 {
+	/delete-property/ dma-coherent;
+};
+
+&pcie2 {
+	/delete-property/ dma-coherent;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
new file mode 100644
index 0000000000000..5b1dc58d40ba2
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
@@ -0,0 +1,695 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-nsp.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,nsp";
+	model = "Broadcom Northstar Plus SoC";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		ethernet0 = &amac0;
+		ethernet1 = &amac1;
+		ethernet2 = &amac2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			enable-method = "brcm,bcm-nsp-smp";
+			secondary-boot-reg = <0xffff0fec>;
+			reg = <0x1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	mpcore-bus@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	axi: axi@18000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x0011c40c>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gpioa: gpio@20 {
+			compatible = "brcm,nsp-gpio-a";
+			reg = <0x0020 0x70>,
+			      <0x3f1c4 0x1c>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <32>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+		};
+
+		uart0: serial@300 {
+			compatible = "ns16550a";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		uart1: serial@400 {
+			compatible = "ns16550a";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		dma: dma@20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sdio: mmc@21000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x21000 0x100>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			sdhci,auto-cmd12;
+			clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		amac0: ethernet@22000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x022000 0x1000>,
+			      <0x110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		amac1: ethernet@23000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x023000 0x1000>,
+			      <0x111000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		amac2: ethernet@24000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x024000 0x1000>,
+			      <0x112000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		mailbox: mailbox@25c00 {
+			compatible = "brcm,iproc-fa2-mbox";
+			reg = <0x25c00 0x400>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+			dma-coherent;
+		};
+
+		nand_controller: nand-controller@26000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x026000 0x600>,
+			      <0x11b408 0x600>,
+			      <0x026f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		qspi: spi@27200 {
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+			reg = <0x027200 0x184>,
+			      <0x027000 0x124>,
+			      <0x11c408 0x004>,
+			      <0x0273a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				    "intr_status_reg";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overhead",
+					  "mspi_done",
+					  "mspi_halted";
+			clocks = <&iprocmed>;
+			clock-names = "iprocmed";
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		xhci: usb@29000 {
+			compatible = "generic-xhci";
+			reg = <0x29000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy>;
+			phy-names = "usb3-phy";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		ehci0: usb@2a000 {
+			compatible = "generic-ehci";
+			reg = <0x2a000 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		ohci0: usb@2b000 {
+			compatible = "generic-ohci";
+			reg = <0x2b000 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		crypto@2f000 {
+			compatible = "brcm,spum-nsp-crypto";
+			reg = <0x2f000 0x900>;
+			mboxes = <&mailbox 0>;
+		};
+
+		gpiob: gpio@30000 {
+			compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
+			reg = <0x30000 0x50>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <4>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@31000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x31000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		mdio: mdio@32000 {
+			compatible = "brcm,iproc-mdio";
+			reg = <0x32000 0x8>;
+			#size-cells = <0>;
+			#address-cells = <1>;
+		};
+
+		mdio-mux@32000 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
+			reg = <0x32000 0x4>;
+			mux-mask = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mdio-parent-bus = <&mdio>;
+
+			mdio_int: mdio@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb3_phy: usb3-phy@10 {
+					compatible = "brcm,ns-bx-usb3-phy";
+					reg = <0x10>;
+					usb3-dmp-syscon = <&usb3_dmp>;
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+
+			mdio_ext: mdio@200 {
+				reg = <0x200>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		rng: rng@33000 {
+			compatible = "brcm,bcm-nsp-rng";
+			reg = <0x33000 0x14>;
+		};
+
+		ccbtimer0: timer@34000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x34000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
+		ccbtimer1: timer@35000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x35000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
+		srab: ethernet-switch@36000 {
+			compatible = "brcm,nsp-srab";
+			reg = <0x36000 0x1000>,
+			      <0x3f308 0x8>,
+			      <0x3f410 0xc>;
+			reg-names = "srab", "mux_config", "sgmii_config";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "link_state_p0",
+					  "link_state_p1",
+					  "link_state_p2",
+					  "link_state_p3",
+					  "link_state_p4",
+					  "link_state_p5",
+					  "link_state_p7",
+					  "link_state_p8",
+					  "phy",
+					  "ts",
+					  "imp_sleep_timer_p5",
+					  "imp_sleep_timer_p7",
+					  "imp_sleep_timer_p8";
+			status = "disabled";
+
+			/* ports are defined in board DTS */
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		i2c0: i2c@38000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x38000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		watchdog@39000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x39000 0x1000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		lcpll0: lcpll0@3f100 {
+			#clock-cells = <1>;
+			compatible = "brcm,nsp-lcpll0";
+			reg = <0x3f100 0x14>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll0", "pcie_phy", "sdio",
+					     "ddr_phy";
+		};
+
+		genpll: genpll@3f140 {
+			#clock-cells = <1>;
+			compatible = "brcm,nsp-genpll";
+			reg = <0x3f140 0x24>;
+			clocks = <&osc>;
+			clock-output-names = "genpll", "phy", "ethernetclk",
+					     "usbclk", "iprocfast", "sata1",
+					     "sata2";
+		};
+
+		pinctrl: pinctrl@3f1c0 {
+			compatible = "brcm,nsp-pinmux";
+			reg = <0x3f1c0 0x04>,
+			      <0x30028 0x04>,
+			      <0x3f408 0x04>;
+		};
+
+		thermal: thermal@3f2c0 {
+			compatible = "brcm,ns-thermal";
+			reg = <0x3f2c0 0x10>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		sata_phy: sata_phy@40100 {
+			compatible = "brcm,iproc-nsp-sata-phy";
+			reg = <0x40100 0x340>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		sata: sata@41000 {
+			compatible = "brcm,bcm-nsp-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x41000 0x1000>, <0x40020 0x1c>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dma-coherent;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+				phy-names = "sata-phy";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+				phy-names = "sata-phy";
+			};
+		};
+
+		usb3_dmp: syscon@104000 {
+			reg = <0x104000 0x1000>;
+		};
+	};
+
+	pcie0: pcie@18012000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18012000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+		dma-coherent;
+		status = "disabled";
+
+		msi-parent = <&msi0>;
+		msi0: msi {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	pcie1: pcie@18013000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18013000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <1>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+		dma-coherent;
+		status = "disabled";
+
+		msi-parent = <&msi1>;
+		msi1: msi {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	pcie2: pcie@18014000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18014000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <2>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
+
+		dma-coherent;
+		status = "disabled";
+
+		msi-parent = <&msi2>;
+		msi2: msi {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			coefficients = <(-556) 418000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature     = <125000>;
+					hysteresis      = <0>;
+					type            = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm11351.dtsi b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
new file mode 100644
index 0000000000000..b271a9bf06a9a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012-2013 Broadcom Corporation
+
+#include <dt-bindings/clock/bcm281xx.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "BCM11351 SoC";
+	compatible = "brcm,bcm11351";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x3500417c>;
+			reg = <1>;
+		};
+	};
+
+	gic: interrupt-controller@3ff00100 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x3ff01000 0x1000>,
+		      <0x3ff00100 0x100>;
+	};
+
+	smc@3404c000 {
+		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
+		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
+	};
+
+	uartb: serial@3e000000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		reg = <0x3e000000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uartb2: serial@3e001000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		reg = <0x3e001000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uartb3: serial@3e002000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		reg = <0x3e002000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uartb4: serial@3e003000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		reg = <0x3e003000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	L2: l2-cache@3ff20000 {
+		compatible = "brcm,bcm11351-a2-pl310-cache";
+		reg = <0x3ff20000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	watchdog@35002f40 {
+		compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
+		reg = <0x35002f40 0x6c>;
+	};
+
+	timer@35006000 {
+		compatible = "brcm,kona-timer";
+		reg = <0x35006000 0x1000>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
+	};
+
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x800>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	sdio1: mmc@3f180000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f180000 0x10000>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO1>;
+		status = "disabled";
+	};
+
+	sdio2: mmc@3f190000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f190000 0x10000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO2>;
+		status = "disabled";
+	};
+
+	sdio3: mmc@3f1a0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1a0000 0x10000>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
+		status = "disabled";
+	};
+
+	sdio4: mmc@3f1b0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1b0000 0x10000>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO4>;
+		status = "disabled";
+	};
+
+	pinctrl@35004800 {
+		compatible = "brcm,bcm11351-pinctrl";
+		reg = <0x35004800 0x430>;
+	};
+
+	bsc1: i2c@3e016000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e016000 0x80>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC1>;
+		status = "disabled";
+	};
+
+	bsc2: i2c@3e017000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e017000 0x80>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC2>;
+		status = "disabled";
+	};
+
+	bsc3: i2c@3e018000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e018000 0x80>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC3>;
+		status = "disabled";
+	};
+
+	pmu_bsc: i2c@3500d000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3500d000 0x80>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&aon_ccu BCM281XX_AON_CCU_PMU_BSC>;
+		status = "disabled";
+	};
+
+	pwm: pwm@3e01a000 {
+		compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
+		reg = <0x3e01a000 0xcc>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		root_ccu: root_ccu@35001000 {
+			compatible = "brcm,bcm11351-root-ccu";
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		hub_ccu: hub_ccu@34000000 {
+			compatible = "brcm,bcm11351-hub-ccu";
+			reg = <0x34000000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "tmon_1m";
+		};
+
+		aon_ccu: aon_ccu@35002000 {
+			compatible = "brcm,bcm11351-aon-ccu";
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer",
+					     "pmu_bsc",
+					     "pmu_bsc_var";
+		};
+
+		master_ccu: master_ccu@3f001000 {
+			compatible = "brcm,bcm11351-master-ccu";
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "usb_ic",
+					     "hsic2_48m",
+					     "hsic2_12m";
+		};
+
+		slave_ccu: slave_ccu@3e011000 {
+			compatible = "brcm,bcm11351-slave-ccu";
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "uartb4",
+					     "ssp0",
+					     "ssp2",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "pwm";
+		};
+
+		ref_1m_clk: ref_1m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <1000000>;
+		};
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_cx40_clk: ref_cx40 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+			#clock-cells = <0>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		ref_208m_clk: ref_208m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <208000000>;
+		};
+
+		var_208m_clk: var_208m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <208000000>;
+		};
+
+		ref_312m_clk: ref_312m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <312000000>;
+		};
+
+		var_312m_clk: var_312m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <312000000>;
+		};
+	};
+
+	usbotg: usb@3f120000 {
+		compatible = "snps,dwc2";
+		reg = <0x3f120000 0x10000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts
new file mode 100644
index 0000000000000..8789fae178bf8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm21664.dtsi"
+
+/ {
+	model = "BCM21664 Garnet board";
+	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};
+
+&sdio1 {
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm21664.dtsi b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
new file mode 100644
index 0000000000000..2eb7f5b0c1dc5
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
+
+#include <dt-bindings/clock/bcm21664.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "BCM21664 SoC";
+	compatible = "brcm,bcm21664";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+		};
+	};
+
+	gic: interrupt-controller@3ff00100 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x3ff01000 0x1000>,
+		      <0x3ff00100 0x100>;
+	};
+
+	smc@3404e000 {
+		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
+		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
+	};
+
+	uartb: serial@3e000000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		reg = <0x3e000000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uartb2: serial@3e001000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		reg = <0x3e001000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uartb3: serial@3e002000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		reg = <0x3e002000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	L2: cache-controller@3ff20000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x3ff20000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	brcm,resetmgr@35001f00 {
+		compatible = "brcm,bcm21664-resetmgr";
+		reg = <0x35001f00 0x24>;
+	};
+
+	timer@35006000 {
+		compatible = "brcm,kona-timer";
+		reg = <0x35006000 0x1c>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+	};
+
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x524>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	sdio1: mmc@3f180000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f180000 0x801c>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+		status = "disabled";
+	};
+
+	sdio2: mmc@3f190000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f190000 0x801c>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+		status = "disabled";
+	};
+
+	sdio3: mmc@3f1a0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1a0000 0x801c>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+		status = "disabled";
+	};
+
+	sdio4: mmc@3f1b0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1b0000 0x801c>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+		status = "disabled";
+	};
+
+	bsc1: i2c@3e016000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e016000 0x70>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+		status = "disabled";
+	};
+
+	bsc2: i2c@3e017000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e017000 0x70>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+		status = "disabled";
+	};
+
+	bsc3: i2c@3e018000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e018000 0x70>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+		status = "disabled";
+	};
+
+	bsc4: i2c@3e01c000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e01c000 0x70>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu@35001000 {
+			compatible = "brcm,bcm21664-root-ccu";
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu@35002000 {
+			compatible = "brcm,bcm21664-aon-ccu";
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		master_ccu: master_ccu@3f001000 {
+			compatible = "brcm,bcm21664-master-ccu";
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+
+		slave_ccu: slave_ccu@3e011000 {
+			compatible = "brcm,bcm21664-slave-ccu";
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+	};
+
+	usbotg: usb@3f120000 {
+		compatible = "snps,dwc2";
+		reg = <0x3f120000 0x10000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm23550-sparrow.dts b/arch/arm/boot/dts/broadcom/bcm23550-sparrow.dts
new file mode 100644
index 0000000000000..ace77709f468b
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm23550-sparrow.dts
@@ -0,0 +1,81 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm23550.dtsi"
+
+/ {
+	model = "BCM23550 Sparrow board";
+	compatible = "brcm,bcm23550-sparrow", "brcm,bcm23550";
+
+	chosen {
+		stdout-path = "/slaves@3e000000/serial@0:115200n8";
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&sdio1 {
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm23550.dtsi b/arch/arm/boot/dts/broadcom/bcm23550.dtsi
new file mode 100644
index 0000000000000..445eadb8d871f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm23550.dtsi
@@ -0,0 +1,414 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* BCM23550 and BCM21664 have almost identical clocks */
+#include <dt-bindings/clock/bcm21664.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "BCM23550 SoC";
+	compatible = "brcm,bcm23550";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <2>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <3>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	/* Hub bus */
+	hub@34000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x34000000 0x102f83ac>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		smc@4e000 {
+			compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
+			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
+		};
+
+		resetmgr: reset-controller@1001f00 {
+			compatible = "brcm,bcm21664-resetmgr";
+			reg = <0x01001f00 0x24>;
+		};
+
+		gpio: gpio@1003000 {
+			compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
+			reg = <0x01003000 0x524>;
+			interrupts =
+			       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+		};
+
+		timer@1006000 {
+			compatible = "brcm,kona-timer";
+			reg = <0x01006000 0x1c>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+		};
+	};
+
+	/* Slaves bus */
+	slaves@3e000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e000000 0x0001c070>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uartb: serial@0 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00000000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uartb2: serial@1000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00001000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uartb3: serial@2000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00002000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		bsc1: i2c@16000 {
+			compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+			reg = <0x00016000 0x70>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+			status = "disabled";
+		};
+
+		bsc2: i2c@17000 {
+			compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+			reg = <0x00017000 0x70>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+			status = "disabled";
+		};
+
+		bsc3: i2c@18000 {
+			compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+			reg = <0x00018000 0x70>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+			status = "disabled";
+		};
+
+		bsc4: i2c@1c000 {
+			compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+			reg = <0x0001c000 0x70>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+			status = "disabled";
+		};
+	};
+
+	/* Apps bus */
+	apps@3e300000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e300000 0x01b77000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usbotg: usb@e20000 {
+			compatible = "snps,dwc2";
+			reg = <0x00e20000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_otg_ahb_clk>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e30000 {
+			compatible = "brcm,kona-usb2-phy";
+			reg = <0x00e30000 0x28>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		sdio1: mmc@e80000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e80000 0x801c>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+			status = "disabled";
+		};
+
+		sdio2: mmc@e90000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e90000 0x801c>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+			status = "disabled";
+		};
+
+		sdio3: mmc@ea0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00ea0000 0x801c>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+			status = "disabled";
+		};
+
+		sdio4: mmc@eb0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00eb0000 0x801c>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+			status = "disabled";
+		};
+
+		cdc: cdc@1b0e000 {
+			compatible = "brcm,bcm23550-cdc";
+			reg = <0x01b0e000 0x78>;
+		};
+
+		gic: interrupt-controller@1b21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x01b21000 0x1000>,
+			      <0x01b22000 0x1000>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu@35001000 {
+			compatible = "brcm,bcm21664-root-ccu";
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu@35002000 {
+			compatible = "brcm,bcm21664-aon-ccu";
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		slave_ccu: slave_ccu@3e011000 {
+			compatible = "brcm,bcm21664-slave-ccu";
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+
+		master_ccu: master_ccu@3f001000 {
+			compatible = "brcm,bcm21664-master-ccu";
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
new file mode 100644
index 0000000000000..d5f8823230db9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711.dtsi"
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-peripheral.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
+	model = "Raspberry Pi 4 Model B";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		status = "okay";
+	};
+
+	sd_vcc_reg: regulator-sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",		/*  0 */
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "GLOBAL_RESET",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",		/*  5 */
+			  "SD_PWR_ON",
+			  "";
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",		/*  0 */
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",		/*  5 */
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",		/* 10 */
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",		/* 15 */
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",		/* 20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",		/* 25 */
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",		/* 30 */
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",		/* 35 */
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",		/* 40 */
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",		/* 45 */
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",		/* 50 */
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",		/* 55 */
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led_pwr: led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
+	status = "okay";
+};
+
+/* EMMC2 is used to drive the SD card */
+&emmc2 {
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	broken-cd;
+	status = "okay";
+};
+
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&genet_mdio {
+	phy1: ethernet-phy@1 {
+		/* No PHY interrupt */
+		reg = <0x1>;
+	};
+};
+
+&pcie0 {
+	pci@0,0 {
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		reg = <0 0 0 0 0>;
+
+		usb@0,0 {
+			reg = <0 0 0 0 0>;
+			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
+		};
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
+	uart-has-rtscts;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&vc4 {
+	status = "okay";
+};
+
+&vec {
+	status = "disabled";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
new file mode 100644
index 0000000000000..1ab8184302db4
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711-rpi-4-b.dts"
+
+/ {
+	compatible = "raspberrypi,400", "brcm,bcm2711";
+	model = "Raspberry Pi 400";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "GLOBAL_RESET",
+			  "VDD_SD_IO_SEL",
+			  "GLOBAL_SHUTDOWN",
+			  "SD_PWR_ON",
+			  "SHUTDOWN_REQUEST";
+};
+
+&genet_mdio {
+	clock-frequency = <1950000>;
+};
+
+&led_pwr {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	/delete-node/ led_act;
+};
+
+&pm {
+	/delete-property/ system-power-controller;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
new file mode 100644
index 0000000000000..d7ba02f586d30
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711-rpi-cm4.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	model = "Raspberry Pi Compute Module 4 IO Board";
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&genet {
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&vc4 {
+	status = "okay";
+};
+
+&vec {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi
new file mode 100644
index 0000000000000..48e63ab7848c0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711.dtsi"
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		status = "okay";
+	};
+
+	sd_vcc_reg: regulator-sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+/* EMMC2 is used to drive the eMMC */
+&emmc2 {
+	bus-width = <8>;
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	broken-cd;
+	/* Even the IP block is limited to 100 MHz
+	 * this provides a throughput gain
+	 */
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "ANT1",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",
+			  "SD_PWR_ON",
+			  "ANT2";
+
+	ant1: ant1-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>;
+		/* internal antenna enabled */
+		output-high;
+		line-name = "ant1";
+	};
+
+	ant2: ant2-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_HIGH>;
+		/* external antenna disabled */
+		output-low;
+		line-name = "ant2";
+	};
+};
+
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&genet_mdio {
+	phy1: ethernet-phy@0 {
+		/* No PHY interrupt */
+		reg = <0x0>;
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
+	uart-has-rtscts;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
new file mode 100644
index 0000000000000..98817a6675b9d
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0>;
+	};
+
+	aliases {
+		emmc2bus = &emmc2bus;
+		ethernet0 = &genet;
+		pcie0 = &pcie0;
+		blconfig = &blconfig;
+	};
+};
+
+&firmware {
+	firmware_clocks: clocks {
+		compatible = "raspberrypi,firmware-clocks";
+		#clock-cells = <1>;
+	};
+
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "okay";
+	};
+
+	reset: reset {
+		compatible = "raspberrypi,firmware-reset";
+		#reset-cells = <1>;
+	};
+};
+
+&hdmi0 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hdmi1 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hvs {
+	clocks = <&firmware_clocks 4>;
+};
+
+&rmem {
+	/*
+	 * RPi4's co-processor will copy the board's bootloader configuration
+	 * into memory for the OS to consume. It'll also update this node with
+	 * its placement information.
+	 */
+	blconfig: nvram@0 {
+		compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x0>;
+		no-map;
+		status = "disabled";
+	};
+};
+
+&v3d {
+	clocks = <&firmware_clocks 5>;
+};
+
+&vchiq {
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
new file mode 100644
index 0000000000000..097e9f252235a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -0,0 +1,1172 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
+
+/ {
+	compatible = "brcm,bcm2711";
+
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gicv2>;
+
+	vc4: gpu {
+		compatible = "brcm,bcm2711-vc5";
+		status = "disabled";
+	};
+
+	clk_27MHz: clk-27M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		clock-output-names = "27MHz-clock";
+	};
+
+	clk_108MHz: clk-108M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <108000000>;
+		clock-output-names = "108MHz-clock";
+	};
+
+	soc {
+		/*
+		 * Defined ranges:
+		 *   Common BCM283x peripherals
+		 *   BCM2711-specific peripherals
+		 *   ARM-local peripherals
+		 */
+		ranges = <0x7e000000  0x0 0xfe000000  0x01800000>,
+			 <0x7c000000  0x0 0xfc000000  0x02000000>,
+			 <0x40000000  0x0 0xff800000  0x00800000>;
+		/* Emulate a contiguous 30-bit address range for DMA */
+		dma-ranges = <0xc0000000  0x0 0x00000000  0x40000000>;
+
+		/*
+		 * This node is the provider for the enable-method for
+		 * bringing up secondary cores.
+		 */
+		local_intc: interrupt-controller@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+		};
+
+		gicv2: interrupt-controller@40041000 {
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "arm,gic-400";
+			reg =	<0x40041000 0x1000>,
+				<0x40042000 0x2000>,
+				<0x40044000 0x2000>,
+				<0x40046000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		avs_monitor: avs-monitor@7d5d2000 {
+			compatible = "brcm,bcm2711-avs-monitor",
+				     "syscon", "simple-mfd";
+			reg = <0x7d5d2000 0xf00>;
+
+			thermal: thermal {
+				compatible = "brcm,bcm2711-thermal";
+				#thermal-sensor-cells = <0>;
+			};
+		};
+
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xb00>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     /* DMA lite 7 - 10 */
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x07f5>;
+		};
+
+		pm: watchdog@7e100000 {
+			compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt";
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x7e100000 0x114>,
+			      <0x7e00a000 0x24>,
+			      <0x7ec11000 0x20>;
+			reg-names = "pm", "asb", "rpivid_asb";
+			clocks = <&clocks BCM2835_CLOCK_V3D>,
+				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+				 <&clocks BCM2835_CLOCK_H264>,
+				 <&clocks BCM2835_CLOCK_ISP>;
+			clock-names = "v3d", "peri_image", "h264", "isp";
+			system-power-controller;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2711-rng200";
+			reg = <0x7e104000 0x28>;
+		};
+
+		uart2: serial@7e201400 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201400 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		uart3: serial@7e201600 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201600 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		uart4: serial@7e201800 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201800 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		uart5: serial@7e201a00 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201a00 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		spi3: spi@7e204600 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204600 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@7e204800 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204800 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi5: spi@7e204a00 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204a00 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi6: spi@7e204c00 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204c00 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@7e205600 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205600 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@7e205800 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205800 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@7e205a00 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205a00 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@7e205c00 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205c00 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pixelvalve0: pixelvalve@7e206000 {
+			compatible = "brcm,bcm2711-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pixelvalve1: pixelvalve@7e207000 {
+			compatible = "brcm,bcm2711-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pixelvalve2: pixelvalve@7e20a000 {
+			compatible = "brcm,bcm2711-pixelvalve2";
+			reg = <0x7e20a000 0x100>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@7e20c800 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c800 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pixelvalve4: pixelvalve@7e216000 {
+			compatible = "brcm,bcm2711-pixelvalve4";
+			reg = <0x7e216000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		hvs: hvs@7e400000 {
+			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pixelvalve3: pixelvalve@7ec12000 {
+			compatible = "brcm,bcm2711-pixelvalve3";
+			reg = <0x7ec12000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		vec: vec@7ec13000 {
+			compatible = "brcm,bcm2711-vec";
+			reg = <0x7ec13000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		dvp: clock@7ef00000 {
+			compatible = "brcm,brcm2711-dvp";
+			reg = <0x7ef00000 0x10>;
+			clocks = <&clk_108MHz>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		aon_intr: interrupt-controller@7ef00100 {
+			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+			reg = <0x7ef00100 0x30>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		hdmi0: hdmi@7ef00700 {
+			compatible = "brcm,bcm2711-hdmi0";
+			reg = <0x7ef00700 0x300>,
+			      <0x7ef00300 0x200>,
+			      <0x7ef00f00 0x80>,
+			      <0x7ef00f80 0x80>,
+			      <0x7ef01b00 0x200>,
+			      <0x7ef01f00 0x400>,
+			      <0x7ef00200 0x80>,
+			      <0x7ef04300 0x100>,
+			      <0x7ef20000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			clock-names = "hdmi", "bvb", "audio", "cec";
+			resets = <&dvp 0>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <0>, <1>, <2>,
+				     <3>, <4>, <5>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "wakeup", "hpd-connected", "hpd-removed";
+			ddc = <&ddc0>;
+			dmas = <&dma 10>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		ddc0: i2c@7ef04500 {
+			compatible = "brcm,bcm2711-hdmi-i2c";
+			reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+			reg-names = "bsc", "auto-i2c";
+			clock-frequency = <97500>;
+			status = "disabled";
+		};
+
+		hdmi1: hdmi@7ef05700 {
+			compatible = "brcm,bcm2711-hdmi1";
+			reg = <0x7ef05700 0x300>,
+			      <0x7ef05300 0x200>,
+			      <0x7ef05f00 0x80>,
+			      <0x7ef05f80 0x80>,
+			      <0x7ef06b00 0x200>,
+			      <0x7ef06f00 0x400>,
+			      <0x7ef00280 0x80>,
+			      <0x7ef09300 0x100>,
+			      <0x7ef20000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			ddc = <&ddc1>;
+			clock-names = "hdmi", "bvb", "audio", "cec";
+			resets = <&dvp 1>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <8>, <7>, <6>,
+				     <9>, <10>, <11>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "wakeup", "hpd-connected", "hpd-removed";
+			dmas = <&dma 17>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		ddc1: i2c@7ef09500 {
+			compatible = "brcm,bcm2711-hdmi-i2c";
+			reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
+			reg-names = "bsc", "auto-i2c";
+			clock-frequency = <97500>;
+			status = "disabled";
+		};
+	};
+
+	/*
+	 * emmc2 has different DMA constraints based on SoC revisions. It was
+	 * moved into its own bus, so as for RPi4's firmware to update them.
+	 * The firmware will find whether the emmc2bus alias is defined, and if
+	 * so, it'll edit the dma-ranges property below accordingly.
+	 */
+	emmc2bus: emmc2bus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
+		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
+
+		emmc2: mmc@7e340000 {
+			compatible = "brcm,bcm2711-emmc2";
+			reg = <0x0 0x7e340000 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2711_CLOCK_EMMC2>;
+			status = "disabled";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		/* This only applies to the ARMv7 stub */
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
+		};
+	};
+
+	scb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
+			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
+
+		pcie0: pcie@7d500000 {
+			compatible = "brcm,bcm2711-pcie";
+			reg = <0x0 0x7d500000 0x9310>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 146
+							IRQ_TYPE_LEVEL_HIGH>;
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+				  0x0 0x04000000>;
+			/*
+			 * The wrapper around the PCIe block has a bug
+			 * preventing it from accessing beyond the first 3GB of
+			 * memory.
+			 */
+			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+				      0x0 0xc0000000>;
+			brcm,enable-ssc;
+		};
+
+		genet: ethernet@7d580000 {
+			compatible = "brcm,bcm2711-genet-v5";
+			reg = <0x0 0x7d580000 0x10000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+
+			genet_mdio: mdio@e14 {
+				compatible = "brcm,genet-mdio-v5";
+				reg = <0xe14 0x8>;
+				reg-names = "mdio";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+			};
+		};
+
+		v3d: gpu@7ec00000 {
+			compatible = "brcm,2711-v3d";
+			reg = <0x0 0x7ec00000 0x4000>,
+			      <0x0 0x7ec04000 0x4000>;
+			reg-names = "hub", "core0";
+
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+			resets = <&pm BCM2835_RESET_V3D>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
+
+&clk_osc {
+	clock-frequency = <54000000>;
+};
+
+&clocks {
+	compatible = "brcm,bcm2711-cprman";
+};
+
+&cpu_thermal {
+	coefficients = <(-487) 410040>;
+	thermal-sensors = <&thermal>;
+};
+
+&dsi0 {
+	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&dsi1 {
+	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+	compatible = "brcm,bcm2711-dsi1";
+};
+
+&gpio {
+	compatible = "brcm,bcm2711-gpio";
+	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+
+	gpio-ranges = <&gpio 0 0 58>;
+
+	gpclk0_gpio49: gpclk0-gpio49 {
+		pin-gpclk {
+			pins = "gpio49";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	gpclk1_gpio50: gpclk1-gpio50 {
+		pin-gpclk {
+			pins = "gpio50";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	gpclk2_gpio51: gpclk2-gpio51 {
+		pin-gpclk {
+			pins = "gpio51";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+
+	i2c0_gpio46: i2c0-gpio46 {
+		pin-sda {
+			function = "alt0";
+			pins = "gpio46";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt0";
+			pins = "gpio47";
+			bias-disable;
+		};
+	};
+	i2c1_gpio46: i2c1-gpio46 {
+		pin-sda {
+			function = "alt1";
+			pins = "gpio46";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt1";
+			pins = "gpio47";
+			bias-disable;
+		};
+	};
+	i2c3_gpio2: i2c3-gpio2 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio2";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio3";
+			bias-disable;
+		};
+	};
+	i2c3_gpio4: i2c3-gpio4 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio4";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio5";
+			bias-disable;
+		};
+	};
+	i2c4_gpio6: i2c4-gpio6 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio6";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio7";
+			bias-disable;
+		};
+	};
+	i2c4_gpio8: i2c4-gpio8 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio8";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio9";
+			bias-disable;
+		};
+	};
+	i2c5_gpio10: i2c5-gpio10 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio10";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio11";
+			bias-disable;
+		};
+	};
+	i2c5_gpio12: i2c5-gpio12 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio12";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio13";
+			bias-disable;
+		};
+	};
+	i2c6_gpio0: i2c6-gpio0 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio0";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio1";
+			bias-disable;
+		};
+	};
+	i2c6_gpio22: i2c6-gpio22 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio22";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio23";
+			bias-disable;
+		};
+	};
+	i2c_slave_gpio8: i2c-slave-gpio8 {
+		pins-i2c-slave {
+			pins = "gpio8",
+			       "gpio9",
+			       "gpio10",
+			       "gpio11";
+			function = "alt3";
+		};
+	};
+
+	jtag_gpio48: jtag-gpio48 {
+		pins-jtag {
+			pins = "gpio48",
+			       "gpio49",
+			       "gpio50",
+			       "gpio51",
+			       "gpio52",
+			       "gpio53";
+			function = "alt4";
+		};
+	};
+
+	mii_gpio28: mii-gpio28 {
+		pins-mii {
+			pins = "gpio28",
+			       "gpio29",
+			       "gpio30",
+			       "gpio31";
+			function = "alt4";
+		};
+	};
+	mii_gpio36: mii-gpio36 {
+		pins-mii {
+			pins = "gpio36",
+			       "gpio37",
+			       "gpio38",
+			       "gpio39";
+			function = "alt5";
+		};
+	};
+
+	pcm_gpio50: pcm-gpio50 {
+		pins-pcm {
+			pins = "gpio50",
+			       "gpio51",
+			       "gpio52",
+			       "gpio53";
+			function = "alt2";
+		};
+	};
+
+	pwm0_0_gpio12: pwm0-0-gpio12 {
+		pin-pwm {
+			pins = "gpio12";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_0_gpio18: pwm0-0-gpio18 {
+		pin-pwm {
+			pins = "gpio18";
+			function = "alt5";
+			bias-disable;
+		};
+	};
+	pwm1_0_gpio40: pwm1-0-gpio40 {
+		pin-pwm {
+			pins = "gpio40";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio13: pwm0-1-gpio13 {
+		pin-pwm {
+			pins = "gpio13";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio19: pwm0-1-gpio19 {
+		pin-pwm {
+			pins = "gpio19";
+			function = "alt5";
+			bias-disable;
+		};
+	};
+	pwm1_1_gpio41: pwm1-1-gpio41 {
+		pin-pwm {
+			pins = "gpio41";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio45: pwm0-1-gpio45 {
+		pin-pwm {
+			pins = "gpio45";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_0_gpio52: pwm0-0-gpio52 {
+		pin-pwm {
+			pins = "gpio52";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio53: pwm0-1-gpio53 {
+		pin-pwm {
+			pins = "gpio53";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+
+	rgmii_gpio35: rgmii-gpio35 {
+		pin-start-stop {
+			pins = "gpio35";
+			function = "alt4";
+		};
+		pin-rx-ok {
+			pins = "gpio36";
+			function = "alt4";
+		};
+	};
+	rgmii_irq_gpio34: rgmii-irq-gpio34 {
+		pin-irq {
+			pins = "gpio34";
+			function = "alt5";
+		};
+	};
+	rgmii_irq_gpio39: rgmii-irq-gpio39 {
+		pin-irq {
+			pins = "gpio39";
+			function = "alt4";
+		};
+	};
+	rgmii_mdio_gpio28: rgmii-mdio-gpio28 {
+		pins-mdio {
+			pins = "gpio28",
+			       "gpio29";
+			function = "alt5";
+		};
+	};
+	rgmii_mdio_gpio37: rgmii-mdio-gpio37 {
+		pins-mdio {
+			pins = "gpio37",
+			       "gpio38";
+			function = "alt4";
+		};
+	};
+
+	spi0_gpio46: spi0-gpio46 {
+		pins-spi {
+			pins = "gpio46",
+			       "gpio47",
+			       "gpio48",
+			       "gpio49";
+			function = "alt2";
+		};
+	};
+	spi2_gpio46: spi2-gpio46 {
+		pins-spi {
+			pins = "gpio46",
+			       "gpio47",
+			       "gpio48",
+			       "gpio49",
+			       "gpio50";
+			function = "alt5";
+		};
+	};
+	spi3_gpio0: spi3-gpio0 {
+		pins-spi {
+			pins = "gpio0",
+			       "gpio1",
+			       "gpio2",
+			       "gpio3";
+			function = "alt3";
+		};
+	};
+	spi4_gpio4: spi4-gpio4 {
+		pins-spi {
+			pins = "gpio4",
+			       "gpio5",
+			       "gpio6",
+			       "gpio7";
+			function = "alt3";
+		};
+	};
+	spi5_gpio12: spi5-gpio12 {
+		pins-spi {
+			pins = "gpio12",
+			       "gpio13",
+			       "gpio14",
+			       "gpio15";
+			function = "alt3";
+		};
+	};
+	spi6_gpio18: spi6-gpio18 {
+		pins-spi {
+			pins = "gpio18",
+			       "gpio19",
+			       "gpio20",
+			       "gpio21";
+			function = "alt3";
+		};
+	};
+
+	uart2_gpio0: uart2-gpio0 {
+		pin-tx {
+			pins = "gpio0";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio1";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 {
+		pin-cts {
+			pins = "gpio2";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio3";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart3_gpio4: uart3-gpio4 {
+		pin-tx {
+			pins = "gpio4";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio5";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 {
+		pin-cts {
+			pins = "gpio6";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio7";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart4_gpio8: uart4-gpio8 {
+		pin-tx {
+			pins = "gpio8";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio9";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 {
+		pin-cts {
+			pins = "gpio10";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio11";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart5_gpio12: uart5-gpio12 {
+		pin-tx {
+			pins = "gpio12";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio13";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 {
+		pin-cts {
+			pins = "gpio14";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio15";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+};
+
+&rmem {
+	#address-cells = <2>;
+};
+
+&cma {
+	/*
+	 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
+	 * that's not good enough for the BCM2711 as some devices can
+	 * only address the lower 1G of memory (ZONE_DMA).
+	 */
+	alloc-ranges = <0x0 0x00000000 0x40000000>;
+};
+
+&i2c0 {
+	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c1 {
+	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mailbox {
+	interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdhci {
+	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdhost {
+	interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi {
+	interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi1 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi2 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&system_timer {
+	interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&txp {
+	interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart0 {
+	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart1 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&vec {
+	compatible = "brcm,bcm2711-vec";
+	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
new file mode 100644
index 0000000000000..0a8ad1d673d85
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Broadcom Corporation
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm11351.dtsi"
+
+/ {
+	model = "BCM28155 AP board";
+	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	serial@3e000000 {
+		status = "okay";
+	};
+
+	i2c@3e016000 {
+		clock-frequency = <400000>;
+		status = "okay";
+	};
+
+	i2c@3e017000 {
+		clock-frequency = <400000>;
+		status = "okay";
+	};
+
+	i2c@3e018000 {
+		clock-frequency = <400000>;
+		status = "okay";
+	};
+
+	i2c@3500d000 {
+		clock-frequency = <100000>;
+		status = "okay";
+
+		pmu: pmu@8 {
+			reg = <0x08>;
+		};
+	};
+
+	sdio2: mmc@3f190000 {
+		non-removable;
+		max-frequency = <48000000>;
+		vmmc-supply = <&camldo1_reg>;
+		vqmmc-supply = <&iosr1_reg>;
+		status = "okay";
+	};
+
+	sdio4: mmc@3f1b0000 {
+		max-frequency = <48000000>;
+		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		vmmc-supply = <&sdldo_reg>;
+		vqmmc-supply = <&sdxldo_reg>;
+		status = "okay";
+	};
+
+	pwm: pwm@3e01a000 {
+		status = "okay";
+	};
+
+	usbotg: usb@3f120000 {
+		vusb_d-supply = <&usbldo_reg>;
+		vusb_a-supply = <&iosr1_reg>;
+		status = "okay";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		status = "okay";
+	};
+};
+
+#include "bcm59056.dtsi"
+
+&pmu {
+	compatible = "brcm,bcm59056";
+	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+	regulators {
+		camldo1_reg: camldo1 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		sdldo_reg: sdldo {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		sdxldo_reg: sdxldo {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		usbldo_reg: usbldo {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		iosr1_reg: iosr1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
new file mode 100644
index 0000000000000..bb7e8f7facafd
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations.
+ */
+
+/ {
+	interrupt-parent = <&intc>;
+
+	soc {
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xf00>;
+			interrupts = <1 16>,
+				     <1 17>,
+				     <1 18>,
+				     <1 19>,
+				     <1 20>,
+				     <1 21>,
+				     <1 22>,
+				     <1 23>,
+				     <1 24>,
+				     <1 25>,
+				     <1 26>,
+				     /* dma channel 11-14 share one irq */
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     /* unused shared irq for all channels */
+				     <1 28>;
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10",
+					  "dma11",
+					  "dma12",
+					  "dma13",
+					  "dma14",
+					  "dma-shared-all";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x7f35>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm: watchdog@7e100000 {
+			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x7e100000 0x114>,
+			      <0x7e00a000 0x24>;
+			reg-names = "pm", "asb";
+			clocks = <&clocks BCM2835_CLOCK_V3D>,
+				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+				 <&clocks BCM2835_CLOCK_H264>,
+				 <&clocks BCM2835_CLOCK_ISP>;
+			clock-names = "v3d", "peri_image", "h264", "isp";
+			system-power-controller;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+			interrupts = <2 29>;
+		};
+
+		pixelvalve@7e206000 {
+			compatible = "brcm,bcm2835-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <2 13>; /* pwa0 */
+		};
+
+		pixelvalve@7e207000 {
+			compatible = "brcm,bcm2835-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <2 14>; /* pwa1 */
+		};
+
+		thermal: thermal@7e212000 {
+			compatible = "brcm,bcm2835-thermal";
+			reg = <0x7e212000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@7e805000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e805000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+		};
+
+		vec: vec@7e806000 {
+			compatible = "brcm,bcm2835-vec";
+			reg = <0x7e806000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <2 27>;
+			status = "disabled";
+		};
+
+		pixelvalve@7e807000 {
+			compatible = "brcm,bcm2835-pixelvalve2";
+			reg = <0x7e807000 0x100>;
+			interrupts = <2 10>; /* pixelvalve */
+		};
+
+		hdmi: hdmi@7e902000 {
+			compatible = "brcm,bcm2835-hdmi";
+			reg = <0x7e902000 0x600>,
+			      <0x7e808000 0x100>;
+			interrupts = <2 8>, <2 9>;
+			ddc = <&i2c2>;
+			clocks = <&clocks BCM2835_PLLH_PIX>,
+				 <&clocks BCM2835_CLOCK_HSM>;
+			clock-names = "pixel", "hdmi";
+			dmas = <&dma 17>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		v3d: v3d@7ec00000 {
+			compatible = "brcm,bcm2835-v3d";
+			reg = <0x7ec00000 0x1000>;
+			interrupts = <1 10>;
+		};
+
+		vc4: gpu {
+			compatible = "brcm,bcm2835-vc4";
+		};
+	};
+};
+
+&cpu_thermal {
+	thermal-sensors = <&thermal>;
+};
+
+&gpio {
+	i2c_slave_gpio18: i2c-slave-gpio18 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	jtag_gpio4: jtag-gpio4 {
+		brcm,pins = <4 5 6 12 13>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+
+	pwm0_gpio12: pwm0-gpio12 {
+		brcm,pins = <12>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm0_gpio18: pwm0-gpio18 {
+		brcm,pins = <18>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	pwm0_gpio40: pwm0-gpio40 {
+		brcm,pins = <40>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio13: pwm1-gpio13 {
+		brcm,pins = <13>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio19: pwm1-gpio19 {
+		brcm,pins = <19>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	pwm1_gpio41: pwm1-gpio41 {
+		brcm,pins = <41>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio45: pwm1-gpio45 {
+		brcm,pins = <45>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2s {
+	dmas = <&dma 2>, <&dma 3>;
+	dma-names = "tx", "rx";
+};
+
+&sdhost {
+	dmas = <&dma 13>;
+	dma-names = "rx-tx";
+};
+
+&spi {
+	dmas = <&dma 6>, <&dma 7>;
+	dma-names = "tx", "rx";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
new file mode 100644
index 0000000000000..02ce817868ba7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model A+";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * This is based on the unreleased schematic for the Model A+.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
new file mode 100644
index 0000000000000..3fdf60eb11dc9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a", "brcm,bcm2835";
+	model = "Raspberry Pi Model A";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "", /* GPIO26 */
+			  "CAM_GPIO0",
+			  /* Binary number representing build/revision */
+			  "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "CONFIG3",
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
new file mode 100644
index 0000000000000..9956fd06a4b63
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model B+";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf
+	 * RPI-BPLUS sheet 1
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "ETH_CLK", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
new file mode 100644
index 0000000000000..4e1770afb145d
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
+	model = "Raspberry Pi Model B rev2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf
+	 * RPI00022 sheet 02
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_CLK",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
+			  "CAM_GPIO",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
new file mode 100644
index 0000000000000..eec1d0892d332
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b", "brcm,bcm2835";
+	model = "Raspberry Pi Model B";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
+			  "CAM_GPIO0",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
new file mode 100644
index 0000000000000..87958a96c3e0c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835-rpi-cm1.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,compute-module", "brcm,bcm2835";
+	model = "Raspberry Pi Compute Module IO board rev1";
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "GPIO0",
+			  "GPIO1",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "GPIO32",
+			  "GPIO33",
+			  "GPIO34",
+			  "GPIO35",
+			  "GPIO36",
+			  "GPIO37",
+			  "GPIO38",
+			  "GPIO39",
+			  "GPIO40",
+			  "GPIO41",
+			  "GPIO42",
+			  "GPIO43",
+			  "GPIO44",
+			  "GPIO45",
+			  "HDMI_HPD_N",
+			  /* Also used as ACT LED */
+			  "EMMC_EN_N",
+			  /* Used by eMMC */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1.dtsi
new file mode 100644
index 0000000000000..750cd76948e37
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+
+/ {
+	leds {
+		led-act {
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	reg_3v3: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
+&sdhost {
+	non-removable;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi
new file mode 100644
index 0000000000000..4e7b4a592da7c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
+ * firmware interface.
+ */
+
+#include <dt-bindings/power/raspberrypi-power.h>
+
+&firmware {
+	firmware_clocks: clocks {
+		compatible = "raspberrypi,firmware-clocks";
+		#clock-cells = <1>;
+	};
+};
+
+&hdmi {
+	clocks = <&firmware_clocks 9>,
+		 <&firmware_clocks 13>;
+	clock-names = "pixel", "hdmi";
+};
+
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
+
+&vec {
+	clocks = <&firmware_clocks 15>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
new file mode 100644
index 0000000000000..dbf825985ec0b
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
+	model = "Raspberry Pi Zero W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&bt {
+	shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "CAM_GPIO1", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "CAM_GPIO0", /* GPIO44 */
+			  "BT_ON", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
new file mode 100644
index 0000000000000..f80e65a825fd6
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
+	model = "Raspberry Pi Zero";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
new file mode 100644
index 0000000000000..ee9ee9d1fe654
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
@@ -0,0 +1,71 @@
+#include <dt-bindings/power/raspberrypi-power.h>
+
+/ {
+	soc {
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mboxes = <&mailbox>;
+			dma-ranges;
+		};
+
+		power: power {
+			compatible = "raspberrypi,bcm2835-power";
+			firmware = <&firmware>;
+			#power-domain-cells = <1>;
+		};
+
+		vchiq: mailbox@7e00b840 {
+			compatible = "brcm,bcm2835-vchiq";
+			reg = <0x7e00b840 0x3c>;
+			interrupts = <0 2>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+
+	gpioout: gpioout {
+		brcm,pins = <6>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	alt0: alt0 {
+		brcm,pins = <4 5 7 8 9 10 11>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_gpio0>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_gpio2>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&usb {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
+
+&vec {
+	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
+	status = "okay";
+};
+
+&dsi0 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
+};
+
+&dsi1 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835.dtsi b/arch/arm/boot/dts/broadcom/bcm2835.dtsi
new file mode 100644
index 0000000000000..15cb331febbba
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf-s";
+			reg = <0x0>;
+			/* Source for d/i-cache-line-size and d/i-cache-sets
+			 * https://developer.arm.com/documentation/ddi0301
+			 * /h/level-one-memory-system/cache-organization?lang=en
+			 *
+			 * Source for d/i-cache-size
+			 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+			 *
+			 * NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU
+			 * It can be shared with the CPU through fw settings,
+			 * but this is not recommended.
+			 */
+			d-cache-size = <0x4000>;
+			d-cache-line-size = <16>;
+			d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+			i-cache-size = <0x4000>;
+			i-cache-line-size = <16>;
+			i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+		};
+	};
+
+	soc {
+		ranges = <0x7e000000 0x20000000 0x02000000>;
+		dma-ranges = <0x40000000 0x00000000 0x20000000>;
+	};
+
+	arm-pmu {
+		compatible = "arm,arm1176-pmu";
+	};
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2835-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
new file mode 100644
index 0000000000000..6068ec3900817
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2836.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
+	model = "Raspberry Pi 2 Model B";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN",
+			  "CAM_GPIO1",
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N",
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT",
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "CAM_GPIO0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  "ETH_CLK",
+			  "PWM1_OUT",
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2836-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2836-rpi.dtsi
new file mode 100644
index 0000000000000..48b03b55ff56b
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2836-rpi.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+
+&vchiq {
+	compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2836.dtsi b/arch/arm/boot/dts/broadcom/bcm2836.dtsi
new file mode 100644
index 0000000000000..783fe624ba688
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2836.dtsi
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2836";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: interrupt-controller@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp";
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L1-Memory-System
+		 * /About-the-L1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+
+		v7_cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L2-Memory-System
+		 * /About-the-L2-Memory-system?lang=en
+		 * Source for cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
+			cache-level = <2>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2836-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
new file mode 100644
index 0000000000000..3548306dfbcb3
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model A+";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "",
+				  "BT_WL_ON",
+				  "STATUS_LED_R",
+				  "",
+				  "",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * This is mostly based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_G",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "", /* GPIO42 */
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module
+ *
+ * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
+ * by a single GPIO. We can't give GPIO control to one of the drivers,
+ * otherwise the other part would get unexpectedly disturbed.
+ */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 0000000000000..2f1800cbc5221
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B+";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "PWR_LED_R",
+				  "LAN_RUN",
+				  "",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_G",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "ETH_CLK",
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
new file mode 100644
index 0000000000000..61270340075c1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "STATUS_LED",
+				  "LAN_RUN",
+				  "HDMI_HPD_N",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "PWR_LOW_N";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_3b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "", /* GPIO 28 */
+			  "LAN_RUN_BOOT",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "ETH_CLK",
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
new file mode 100644
index 0000000000000..cf84e69fced83
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837-rpi-cm3.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+	model = "Raspberry Pi Compute Module 3 IO board V3.0";
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "GPIO0",
+			  "GPIO1",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "GPIO32",
+			  "GPIO33",
+			  "GPIO34",
+			  "GPIO35",
+			  "GPIO36",
+			  "GPIO37",
+			  "GPIO38",
+			  "GPIO39",
+			  "GPIO40",
+			  "GPIO41",
+			  "GPIO42",
+			  "GPIO43",
+			  "GPIO44",
+			  "GPIO45",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by eMMC */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3.dtsi
new file mode 100644
index 0000000000000..1e4e4946b6b61
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	reg_3v3: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HDMI_HPD_N",
+				  "EMMC_EN_N",
+				  "",
+				  "",
+				  "",
+				  "",
+				  "",
+				  "";
+		status = "okay";
+	};
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 0000000000000..b9cc4594398b1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837";
+	model = "Raspberry Pi Zero 2 W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&bt {
+	shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "CAM_GPIO0", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "BT_ON", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "SDA0", /* GPIO44 */
+			  "SCL0", /* GPIO45 */
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837.dtsi b/arch/arm/boot/dts/broadcom/bcm2837.dtsi
new file mode 100644
index 0000000000000..84c08b46519da
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837.dtsi
@@ -0,0 +1,144 @@
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2837";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: local_intc@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	412000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2837-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi
new file mode 100644
index 0000000000000..70bece63f9a74
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/net/microchip-lan78xx.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb-port@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb-port@1 {
+			compatible = "usb424,2514";
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet: ethernet@1 {
+				compatible = "usb424,7800";
+				reg = <1>;
+
+				mdio {
+					#address-cells = <0x1>;
+					#size-cells = <0x0>;
+					eth_phy: ethernet-phy@1 {
+						reg = <1>;
+						microchip,led-modes = <
+							LAN78XX_LINK_1000_ACTIVITY
+							LAN78XX_LINK_10_100_ACTIVITY
+						>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi
new file mode 100644
index 0000000000000..f83e56de1a725
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	/*
+	 * This file provides the now deprecated ACT LED to the
+	 * Raspberry Pi boards. Please don't include this file
+	 * for new boards!
+	 */
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led_act: led-act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9512.dtsi
new file mode 100644
index 0000000000000..882b138070754
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9512.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9512";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
new file mode 100644
index 0000000000000..4273b90b53cc0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
@@ -0,0 +1,19 @@
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
new file mode 100644
index 0000000000000..73f4ece8dcd0d
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
@@ -0,0 +1,3 @@
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-otg.dtsi
new file mode 100644
index 0000000000000..e2fd9610e1252
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-otg.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+&usb {
+	dr_mode = "otg";
+	g-rx-fifo-size = <256>;
+	g-np-tx-fifo-size = <32>;
+	/*
+	 * According to dwc2 the sum of all device EP
+	 * fifo sizes shouldn't exceed 3776 bytes.
+	 */
+	g-tx-fifo-size = <256 256 512 512 512 768 768>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-peripheral.dtsi
new file mode 100644
index 0000000000000..0ff0e9e253272
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-peripheral.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+&usb {
+	dr_mode = "peripheral";
+	g-rx-fifo-size = <256>;
+	g-np-tx-fifo-size = <32>;
+	g-tx-fifo-size = <256 256 512 512 512 768 768>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi
new file mode 100644
index 0000000000000..0b64cc19941f3
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+	};
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	status = "okay";
+
+	bt: bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x.dtsi b/arch/arm/boot/dts/broadcom/bcm283x.dtsi
new file mode 100644
index 0000000000000..c9c52a19ef3b4
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x.dtsi
@@ -0,0 +1,501 @@
+#include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/clock/bcm2835.h>
+#include <dt-bindings/clock/bcm2835-aux.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
+
+/* firmware-provided startup stubs live here, where the secondary CPUs are
+ * spinning.
+ */
+/memreserve/ 0x00000000 0x00001000;
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
+ * bcm2835.dtsi and bcm2836.dtsi.
+ */
+
+/ {
+	compatible = "brcm,bcm2835";
+	model = "BCM2835";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	rmem: reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cma: linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x4000000>; /* 64MB */
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+
+			trips {
+				cpu-crit {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		system_timer: timer@7e003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			/* This could be a reference to BCM2835_CLOCK_TIMER,
+			 * but we don't have the driver using the common clock
+			 * support yet.
+			 */
+			clock-frequency = <1000000>;
+		};
+
+		txp: txp@7e004000 {
+			compatible = "brcm,bcm2835-txp";
+			reg = <0x7e004000 0x20>;
+			interrupts = <1 11>;
+		};
+
+		clocks: cprman@7e101000 {
+			compatible = "brcm,bcm2835-cprman";
+			#clock-cells = <1>;
+			reg = <0x7e101000 0x2000>;
+
+			/* CPRMAN derives almost everything from the
+			 * platform's oscillator.  However, the DSI
+			 * pixel clocks come from the DSI analog PHY.
+			 */
+			clocks = <&clk_osc>,
+				<&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
+				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
+		};
+
+		mailbox: mailbox@7e00b880 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7e00b880 0x40>;
+			interrupts = <0 1>;
+			#mbox-cells = <0>;
+		};
+
+		gpio: gpio@7e200000 {
+			compatible = "brcm,bcm2835-gpio";
+			reg = <0x7e200000 0xb4>;
+			/*
+			 * The GPIO IP block is designed for 3 banks of GPIOs.
+			 * Each bank has a GPIO interrupt for itself.
+			 * There is an overall "any bank" interrupt.
+			 * In order, these are GIC interrupts 17, 18, 19, 20.
+			 * Since the BCM2835 only has 2 banks, the 2nd bank
+			 * interrupt output appears to be mirrored onto the
+			 * 3rd bank's interrupt signal.
+			 * So, a bank0 interrupt shows up on 17, 20, and
+			 * a bank1 interrupt shows up on 18, 19, 20!
+			 */
+			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&gpio 0 0 54>;
+
+			/* Defines common pin muxing groups
+			 *
+			 * While each pin can have its mux selected
+			 * for various functions individually, some
+			 * groups only make sense to switch to a
+			 * particular function together.
+			 */
+			dpi_gpio0: dpi-gpio0 {
+				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
+					     12 13 14 15 16 17 18 19
+					     20 21 22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			emmc_gpio22: emmc-gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			emmc_gpio34: emmc-gpio34 {
+				brcm,pins = <34 35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP>;
+			};
+			emmc_gpio48: emmc-gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			gpclk0_gpio4: gpclk0-gpio4 {
+				brcm,pins = <4>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio5: gpclk1-gpio5 {
+				brcm,pins = <5>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio42: gpclk1-gpio42 {
+				brcm,pins = <42>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio44: gpclk1-gpio44 {
+				brcm,pins = <44>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio6: gpclk2-gpio6 {
+				brcm,pins = <6>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio43: gpclk2-gpio43 {
+				brcm,pins = <43>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+				brcm,pull = <BCM2835_PUD_OFF>;
+			};
+
+			i2c0_gpio0: i2c0-gpio0 {
+				brcm,pins = <0 1>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio28: i2c0-gpio28 {
+				brcm,pins = <28 29>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio44: i2c0-gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT1>;
+			};
+			i2c1_gpio2: i2c1-gpio2 {
+				brcm,pins = <2 3>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c1_gpio44: i2c1-gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			jtag_gpio22: jtag-gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			pcm_gpio18: pcm-gpio18 {
+				brcm,pins = <18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pcm_gpio28: pcm-gpio28 {
+				brcm,pins = <28 29 30 31>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			sdhost_gpio48: sdhost-gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			spi0_gpio7: spi0-gpio7 {
+				brcm,pins = <7 8 9 10 11>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi0_gpio35: spi0-gpio35 {
+				brcm,pins = <35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi1_gpio16: spi1-gpio16 {
+				brcm,pins = <16 17 18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+			spi2_gpio40: spi2-gpio40 {
+				brcm,pins = <40 41 42 43 44 45>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			uart0_gpio14: uart0-gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			/* Separate from the uart0_gpio14 group
+			 * because it conflicts with spi1_gpio16, and
+			 * people often run uart0 on the two pins
+			 * without flow control.
+			 */
+			uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
+			};
+			uart0_gpio32: uart0-gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
+			};
+			uart0_gpio36: uart0-gpio36 {
+				brcm,pins = <36 37>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 {
+				brcm,pins = <38 39>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			uart1_gpio14: uart1-gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio32: uart1-gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio40: uart1-gpio40 {
+				brcm,pins = <40 41>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 {
+				brcm,pins = <42 43>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+		};
+
+		uart0: serial@7e201000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x200>;
+			interrupts = <2 25>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+		};
+
+		sdhost: mmc@7e202000 {
+			compatible = "brcm,bcm2835-sdhost";
+			reg = <0x7e202000 0x100>;
+			interrupts = <2 24>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			status = "disabled";
+		};
+
+		i2s: i2s@7e203000 {
+			compatible = "brcm,bcm2835-i2s";
+			reg = <0x7e203000 0x24>;
+			clocks = <&clocks BCM2835_CLOCK_PCM>;
+			status = "disabled";
+		};
+
+		spi: spi@7e204000 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204000 0x200>;
+			interrupts = <2 22>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7e205000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205000 0x200>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dpi: dpi@7e208000 {
+			compatible = "brcm,bcm2835-dpi";
+			reg = <0x7e208000 0x8c>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>,
+				 <&clocks BCM2835_CLOCK_DPI>;
+			clock-names = "core", "pixel";
+			status = "disabled";
+		};
+
+		dsi0: dsi@7e209000 {
+			compatible = "brcm,bcm2835-dsi0";
+			reg = <0x7e209000 0x78>;
+			interrupts = <2 4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLA_DSI0>,
+				 <&clocks BCM2835_CLOCK_DSI0E>,
+				 <&clocks BCM2835_CLOCK_DSI0P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi0_byte",
+					     "dsi0_ddr2",
+					     "dsi0_ddr";
+
+			status = "disabled";
+		};
+
+		aux: aux@7e215000 {
+			compatible = "brcm,bcm2835-aux";
+			#clock-cells = <1>;
+			reg = <0x7e215000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+		};
+
+		uart1: serial@7e215040 {
+			compatible = "brcm,bcm2835-aux-uart";
+			reg = <0x7e215040 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+			status = "disabled";
+		};
+
+		spi1: spi@7e215080 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e215080 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@7e2150c0 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e2150c0 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7e20c000 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c000 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		sdhci: mmc@7e300000 {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clocks BCM2835_CLOCK_EMMC>;
+			status = "disabled";
+		};
+
+		hvs@7e400000 {
+			compatible = "brcm,bcm2835-hvs";
+			reg = <0x7e400000 0x6000>;
+			interrupts = <2 1>;
+		};
+
+		dsi1: dsi@7e700000 {
+			compatible = "brcm,bcm2835-dsi1";
+			reg = <0x7e700000 0x8c>;
+			interrupts = <2 12>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLD_DSI1>,
+				 <&clocks BCM2835_CLOCK_DSI1E>,
+				 <&clocks BCM2835_CLOCK_DSI1P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi1_byte",
+					     "dsi1_ddr2",
+					     "dsi1_ddr";
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@7e804000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@7e980000 {
+			compatible = "brcm,bcm2835-usb";
+			reg = <0x7e980000 0x10000>;
+			interrupts = <1 9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk_usb>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+		};
+	};
+
+	clocks {
+		/* The oscillator is the root of the clock tree. */
+		clk_osc: clk-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "osc";
+			clock-frequency = <19200000>;
+		};
+
+		clk_usb: clk-usb {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "otg";
+			clock-frequency = <480000000>;
+		};
+	};
+
+	usbphy: phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts
new file mode 100644
index 0000000000000..c80ac16ad9496
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC56U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac56u", "brcm,bcm4708";
+	model = "Asus RT-AC56U (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-all {
+			label = "bcm53xx:blue:all";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts
new file mode 100644
index 0000000000000..3fe17bd7b86d2
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC68U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac68u", "brcm,bcm4708";
+	model = "Asus RT-AC68U (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-logo {
+			label = "bcm53xx:white:logo";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
new file mode 100644
index 0000000000000..42bcbf10957c4
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb {
+			/* label = "bcm53xx:blue:usb"; */
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>, <&ohci_port2>,
+					  <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power0 {
+			/* label = "bcm53xx:red:power"; */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power1 {
+			/* label = "bcm53xx:white:power"; */
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router0 {
+			/*  label = "bcm53xx:blue:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router1 {
+			/* label = "bcm53xx:amber:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			/* label = "bcm53xx:blue:wan"; */
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wireless0 {
+			/* label = "bcm53xx:blue:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless1 {
+			/* label = "bcm53xx:amber:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Commit mode set by switch? */
+		button-mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: AP mode */
+		button-sw-ap {
+			label = "AP";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts
new file mode 100644
index 0000000000000..8e506269fa1a2
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts
new file mode 100644
index 0000000000000..596129027074e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP2
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP2";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
new file mode 100644
index 0000000000000..95ef6ca7210b3
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-1750DHP
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708";
+	model = "Buffalo WZR-1750DHP (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>, <&ohci_port2>,
+					  <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power0 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power1 {
+			label = "bcm53xx:white:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router0 {
+			label = "bcm53xx:blue:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			label = "bcm53xx:blue:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wireless0 {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Commit mode set by switch? */
+		button-mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: AP mode */
+		button-sw-ap {
+			label = "AP";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
new file mode 100644
index 0000000000000..0ed25bf71f0df
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea6300-v1", "brcm,bcm4708";
+	model = "Linksys EA6300 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
new file mode 100644
index 0000000000000..f1412ba83defb
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea6500-v2", "brcm,bcm4708";
+	model = "Linksys EA6500 V2";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
new file mode 100644
index 0000000000000..e04d2e5ea51aa
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "luxul,xap-1510-v1", "brcm,bcm4708";
+	model = "Luxul XAP-1510 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@4 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
new file mode 100644
index 0000000000000..a399800139d9c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Luxul XWC-1000
+ *
+ * Copyright 2014 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwc-1000", "brcm,bcm4708";
+	model = "Luxul XWC-1000 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "ubi";
+					reg = <0x00000000 0x08000000>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@4 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
new file mode 100644
index 0000000000000..fad3473810a2e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
@@ -0,0 +1,126 @@
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for Netgear R6250 V1
+ *
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r6250-v1", "brcm,bcm4708";
+	model = "Netgear R6250 V1 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-logo {
+			label = "bcm53xx:white:logo";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wireless {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
new file mode 100644
index 0000000000000..77396730bdd3e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R6300 V2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r6300-v2", "brcm,bcm4708";
+	model = "Netgear R6300 V2 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-logo {
+			label = "bcm53xx:white:logo";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wireless {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
new file mode 100644
index 0000000000000..5b2b7b8b3b123
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for SmartRG SR400ac
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "smartrg,sr400ac", "brcm,bcm4708";
+	model = "SmartRG SR400ac";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3-green {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-status-red {
+			label = "bcm53xx:red:status";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-status-green {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-status-blue {
+			label = "bcm53xx:blue:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-red {
+			label = "bcm53xx:red:wan";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708.dtsi b/arch/arm/boot/dts/broadcom/bcm4708.dtsi
new file mode 100644
index 0000000000000..1a19e97a987db
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708.dtsi
@@ -0,0 +1,48 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM4708 SoC.
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+	compatible = "brcm,bcm4708";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm-nsp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			secondary-boot-reg = <0xffff0400>;
+			reg = <0x1>;
+		};
+	};
+
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts
new file mode 100644
index 0000000000000..3854db0118a99
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-N18U
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Asus RT-N18U (BCM47081)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
new file mode 100644
index 0000000000000..d0a26b643b82f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-600DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Buffalo WZR-600DHP2 (BCM47081)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power1 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router0 {
+			label = "bcm53xx:green:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wireless0 {
+			label = "bcm53xx:green:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch device mode? */
+		button-mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts
new file mode 100644
index 0000000000000..7655e4ff2d1cc
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-900DHP
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Buffalo WZR-900DHP (BCM47081)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb {
+			label = "bcm53xx:green:usb";
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power1 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router0 {
+			label = "bcm53xx:green:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wireless0 {
+			label = "bcm53xx:green:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
new file mode 100644
index 0000000000000..9f21d6d6d35b7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "luxul,xap-1410-v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XAP-1410 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@4 {
+			label = "poe";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
new file mode 100644
index 0000000000000..2561072917021
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "luxul,xwr-1200-v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XWR-1200 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-lan3 {
+			label = "bcm53xx:green:lan3";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-lan4 {
+			label = "bcm53xx:green:lan4";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-lan2 {
+			label = "bcm53xx:green:lan2";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-usb {
+			label = "bcm53xx:green:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-lan1 {
+			label = "bcm53xx:green:lan1";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
new file mode 100644
index 0000000000000..b6a5886698b2a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
+	model = "TP-LINK Archer C5 V2";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-lan {
+			label = "bcm53xx:green:lan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb2-port1 {
+			label = "bcm53xx:green:usb2-port1";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-green {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			label = "bcm53xx:green:wps";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb2-port2 {
+			label = "bcm53xx:green:usb2-port2";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+
+	partitions {
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
+
+		partition-os-image {
+			compatible = "brcm,trx";
+		};
+
+		partition-file-system {
+			linux,rootfs;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081.dtsi b/arch/arm/boot/dts/broadcom/bcm47081.dtsi
new file mode 100644
index 0000000000000..ed13af028528e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM47081 SoC.
+ *
+ * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+	compatible = "brcm,bcm47081";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
new file mode 100644
index 0000000000000..4f44cb4df7049
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC87U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Asus RT-AC87U";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan {
+			label = "bcm53xx:red:wan";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot@0 {
+			label = "boot";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		nvram@80000 {
+			label = "nvram";
+			reg = <0x00080000 0x00180000>;
+		};
+
+		firmware@200000 {
+			label = "firmware";
+			reg = <0x00200000 0x07cc0000>;
+			compatible = "brcm,trx";
+		};
+
+		asus@7ec0000 {
+			label = "asus";
+			reg = <0x07ec0000 0x00140000>;
+			read-only;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
new file mode 100644
index 0000000000000..b7cd2faa30cea
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WXR-1900DHP
+ *
+ * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Buffalo WXR-1900DHP";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb {
+			label = "bcm53xx:green:usb";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router-amber {
+			label = "bcm53xx:amber:router";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router-white {
+			label = "bcm53xx:white:router";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless-amber {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless-white {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+
+		button-aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Commit mode set by switch? */
+		button-mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: AP mode */
+		button-sw-ap {
+			label = "AP";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button-eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
new file mode 100644
index 0000000000000..99253fd7adb31
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Linksys EA9200";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
new file mode 100644
index 0000000000000..24ba8f8f9bf36
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R7000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Netgear R7000";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
new file mode 100644
index 0000000000000..707c561703ed8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
@@ -0,0 +1,234 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R8000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Netgear R8000 (BCM4709)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz-1 {
+			label = "bcm53xx:white:5ghz-1";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wireless {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz-2 {
+			label = "bcm53xx:white:5ghz-2";
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		button-brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			ieee80211-freq-limit = <5735000 5835000>;
+			brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@1,0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		bridge@1,1,0 {
+			reg = <0x0000 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bridge@1,0 {
+				reg = <0x800 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				wifi@0,0 {
+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+					reg = <0x0000 0 0 0 0>;
+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+				};
+			};
+
+			bridge@1,2,2 {
+				reg = <0x1000 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				wifi@1,4,0 {
+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+					reg = <0x0000 0 0 0 0>;
+					ieee80211-freq-limit = <5170000 5730000>;
+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+				};
+			};
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
new file mode 100644
index 0000000000000..5a8b2b1567e66
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+
+/ {
+	compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
+	model = "TP-LINK Archer C9 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wan-blue {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+
+	partitions {
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
+
+		partition-os-image {
+			compatible = "brcm,trx";
+		};
+
+		partition-file-system {
+			linux,rootfs;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709.dtsi b/arch/arm/boot/dts/broadcom/bcm4709.dtsi
new file mode 100644
index 0000000000000..cba3d910bed81
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include "bcm4708.dtsi"
+
+&uart0 {
+	clock-frequency = <125000000>;
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
new file mode 100644
index 0000000000000..4d5747aa5dc82
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2021-2022 Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Asus RT-AC88U";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et1macaddr: et1macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "white:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			label = "red:wan";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-lan {
+			label = "white:lan";
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "white:usb2";
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			label = "white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port1>, <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wps {
+			label = "white:wps";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button-led {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	switch {
+		compatible = "realtek,rtl8365mb";
+		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+		dsa,member = <1 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy-handle = <&ethphy0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan6";
+				phy-handle = <&ethphy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&ethphy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan8";
+				phy-handle = <&ethphy3>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&sw0_p5>;
+				phy-mode = "rgmii";
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <2100>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		sw0_p5: port@5 {
+			/delete-property/ethernet;
+
+			label = "extsw";
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+
+		port@7 {
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
+
+&gmac0 {
+	status = "disabled";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x00080000 0x00180000>;
+		};
+
+		partition@200000 {
+			label = "firmware";
+			reg = <0x00200000 0x07e00000>;
+			compatible = "brcm,trx";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
new file mode 100644
index 0000000000000..51ce510b3e3a0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for D-Link DIR-885L
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-885L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "firmware";
+					reg = <0x00000000 0x08000000>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: router / extender */
+		button-extender {
+			label = "Extender";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
new file mode 100644
index 0000000000000..60744f82c2b71
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device tree for D-Link DIR-890L
+ * D-Link calls this board "WRGAC36"
+ * this router has the same looks and form factor as D-Link DIR-885L.
+ *
+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
+ * router/extender switch is mounted (there is an empty mount point on the
+ * PCB) so this device is a pure router. Also the LAN ports are in the right
+ * order.
+ *
+ * Based on the device tree for DIR-885L
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 Linus Walleij
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-890L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		/*
+		 * LED information is derived from the boot log which
+		 * conveniently lists all the LEDs.
+		 */
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb2-white {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Called "factory reset" in the vendor dmesg */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * The flash memory is memory mapped at 0x1e000000-0x1fffffff
+	 * 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e1f0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e1f0000 0x00010000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+};
+
+&gmac2 {
+	/*
+	 * The NVRAM curiously does not contain a MAC address
+	 * for et2 so since that is the only ethernet interface
+	 * actually in use on the platform, we use this et0 MAC
+	 * address for et2.
+	 */
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&nandcs {
+	/* Spansion S34ML01G2, 128MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * This is called "nflash" in the vendor kernel with
+		 * "upgrade" and "rootfs" (probably using OpenWrt
+		 * splitpart). We call it "firmware" like standard tools
+		 * assume. The CFE loader contains incorrect information
+		 * about TRX partitions, ignore this, there are no TRX
+		 * partitions: this device uses SEAMA.
+		 */
+		firmware@0 {
+			label = "firmware";
+			reg = <0x00000000 0x08000000>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@8 {
+			label = "cpu";
+			phy-mode = "rgmii";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
new file mode 100644
index 0000000000000..8036c04d81cbf
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Linksys EA9500";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x100000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+				label = "WiFi";
+				linux,code = <KEY_RFKILL>;
+				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+				label = "Reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:green:usb2";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wifi-disabled {
+			label = "bcm53xx:amber:wifi-disabled";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wifi-enabled {
+			label = "bcm53xx:white:wifi-enabled";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar1 {
+			label = "bcm53xx:white:bluebar1";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar2 {
+			label = "bcm53xx:white:bluebar2";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar3 {
+			label = "bcm53xx:white:bluebar3";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-bluebar4 {
+			label = "bcm53xx:white:bluebar4";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar5 {
+			label = "bcm53xx:white:bluebar5";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar6 {
+			label = "bcm53xx:white:bluebar6";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar7 {
+			label = "bcm53xx:white:bluebar7";
+			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar8 {
+			label = "bcm53xx:white:bluebar8";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	mdio-mux@18003000 {
+
+		/* BIT(9) = 1 => external mdio */
+		mdio@200 {
+			reg = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch@0  {
+				compatible = "brcm,bcm53125";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+				reset-names = "robo_reset";
+				reg = <0>;
+				dsa,member = <1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinmux_mdio>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "lan1";
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan5";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan2";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan6";
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan3";
+					};
+
+					sw1_p8: port@8 {
+						reg = <8>;
+						ethernet = <&sw0_p0>;
+						label = "cpu";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		sw0_p0: port@0 {
+			label = "extsw";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@1 {
+			label = "lan7";
+		};
+
+		port@2 {
+			label = "lan4";
+		};
+
+		port@3 {
+			label = "lan8";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "linksys,ns-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0000000 0x0080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x080000 0x0100000>;
+		};
+
+		partition@180000{
+			label = "devinfo";
+			reg = <0x0180000 0x080000>;
+		};
+
+		partition@200000 {
+			reg = <0x0200000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
+		};
+
+		partition@1f00000 {
+			reg = <0x01f00000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
+		};
+
+		partition@5200000 {
+			label = "system";
+			reg = <0x05200000 0x02e00000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
new file mode 100644
index 0000000000000..e8991d4e248ce
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul ABR-4500 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+				<&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 1>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
new file mode 100644
index 0000000000000..6875625869d9c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+
+/ {
+	compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XAP-1610 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@1 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
new file mode 100644
index 0000000000000..7cfa4607ef311
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XBR-4500 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+				<&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 1>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
new file mode 100644
index 0000000000000..d55e10095eae7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Legrand AV Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWC-2000 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
new file mode 100644
index 0000000000000..ccf031c0e276d
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3100-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3100 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-lan3 {
+			label = "bcm53xx:green:lan3";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan4 {
+			label = "bcm53xx:green:lan4";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan1 {
+			label = "bcm53xx:green:lan1";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan2 {
+			label = "bcm53xx:green:lan2";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
new file mode 100644
index 0000000000000..789dd2a3d2263
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3150 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts
new file mode 100644
index 0000000000000..76d562610654a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r8500", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Netgear R8500";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power0 {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz-1 {
+			label = "bcm53xx:white:5ghz-1";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz-2 {
+			label = "bcm53xx:white:5ghz-2";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts
new file mode 100644
index 0000000000000..3bf6e24978ac2
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Hamster Tian <haotia@gmail.com>
+ * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Phicomm K3";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0000000 0x0080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x0080000 0x0100000>;
+		};
+
+		partition@180000{
+			label = "phicomm";
+			reg = <0x0180000 0x0280000>;
+			read-only;
+		};
+
+		partition@400000 {
+			label = "firmware";
+			reg = <0x0400000 0x7C00000>;
+			compatible = "brcm,trx";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094.dtsi b/arch/arm/boot/dts/broadcom/bcm47094.dtsi
new file mode 100644
index 0000000000000..6282363313e18
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include "bcm4708.dtsi"
+
+/ {
+};
+
+&pinctrl {
+	compatible = "brcm,bcm4709-pinmux";
+
+	pinmux_mdio: mdio-pins {
+		groups = "mdio_grp";
+		function = "mdio";
+	};
+};
+
+&usb3_phy {
+	compatible = "brcm,ns-bx-usb3-phy";
+};
+
+&uart0 {
+	clock-frequency = <125000000>;
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
new file mode 100644
index 0000000000000..0734aa249b8e0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Luxul XAP-1440 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wlan {
+			label = "bcm53xx:blue:wlan";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		led-system {
+			label = "bcm53xx:green:system";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
new file mode 100644
index 0000000000000..e6fb6cbe69633
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Luxul XAP-810 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds-0 {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		led-system {
+			label = "bcm53xx:green:system";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	leds-1 {
+		compatible = "gpio-leds";
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	ranges = <0x00000000 0 0 0 0 0x00100000>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ranges = <0x00000000 0 0 0 0x00100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pcie0_chipcommon: chipcommon@0 {
+				reg = <0 0x1000>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts
new file mode 100644
index 0000000000000..dab2e5f63a727
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Tenda AC9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds-0 {
+		compatible = "gpio-leds";
+
+		led-usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-system {
+			label = "bcm53xx:blue:system";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	leds-1 {
+		compatible = "gpio-leds";
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	ranges = <0x00000000 0 0 0 0 0x00100000>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ranges = <0x00000000 0 0 0 0x00100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pcie0_chipcommon: chipcommon@0 {
+				reg = <0 0x1000>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&switch {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "wan";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan1";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan3";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan4";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47622.dtsi b/arch/arm/boot/dts/broadcom/bcm47622.dtsi
new file mode 100644
index 0000000000000..7cd38de118c32
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47622.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm47622", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
new file mode 100644
index 0000000000000..03ad614e6b721
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR26 / Codename: Venom
+ *
+ * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
+	model = "Meraki MR26";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <50000000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x200000 0x200000>;
+			/* empty */
+		};
+
+		partition@400000 {
+			label = "u-boot-backup";
+			reg = <0x400000 0x200000>;
+			/* empty */
+		};
+
+		partition@600000 {
+			label = "u-boot-env-backup";
+			reg = <0x600000 0x200000>;
+			/* empty */
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@5 {
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	ina219@40 {
+		compatible = "ti,ina219"; /* PoE power */
+		reg = <0x40>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* it's empty */
+	};
+};
+
+&thermal {
+	status = "disabled";
+	/* does not work, reads 418 degree Celsius */
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts b/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts
new file mode 100644
index 0000000000000..c1f54391746fa
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DWL-8610AP";
+	compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		/* 512 MB RAM in 2 x Macronix D9PSH chips */
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-diag {
+			/* Actually "diag" unclear what this means */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-wlan-2g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wlan-5g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* This GPIO is actually stored in NVRAM, but it's not gonna change */
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * Flash memory at 0x1e000000-0x1fffffff
+	 * Macronix 32 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e080000 0x00020000>;
+
+		et0macaddr: et0macaddr {
+		};
+
+		et1macaddr: et1macaddr {
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	/* Serial SPI NOR Flash MX 25L1606E */
+	status = "okay";
+};
+
+&nandcs {
+	/*
+	 * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
+	 *
+	 * This ECC is a bit unorthodox but it is what the stock firmware
+	 * is using, so to be able to mount the original partitions
+	 * this is necessary.
+	 */
+	nand-ecc-strength = <5>;
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* This is named nflash1.trx in CFE */
+		trx@0 {
+			label = "firmware";
+			reg = <0x00000000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.trx2 in CFE */
+		trx2@2800000 {
+			label = "firmware2";
+			reg = <0x02800000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.rwfs in CFE */
+		free@5000000 {
+			label = "free";
+			reg = <0x05000000 0x03000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
new file mode 100644
index 0000000000000..26c12bfb0bdd4
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR32 / Codename: Espresso
+ *
+ * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708";
+	model = "Meraki MR32";
+
+	chosen {
+		bootargs = " console=ttyS0,115200n8 earlycon";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		serial1 = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sysled3 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+		sysled2 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-0 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			pwms = <&pwm 0 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-1 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			pwms = <&pwm 1 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 2 50000 0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <62500000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	status = "okay";
+	/*
+	 * bluetooth-le {
+	 *	compatible = "brcm,bcm20732";
+	 *	enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+	 *};
+	 */
+};
+
+&gmac0 {
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&mac_address>;
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&pwm {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_pwm>;
+};
+
+&nandcs {
+	partitions {
+		/*
+		 * The partition autodetection does not work for this device.
+		 * It will only detect the "nvram" partition with an incorrect size.
+		 *	[    1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0
+		 *	[    1.727962] Creating 1 MTD partitions on "brcmnand.0":
+		 *	[    1.733117] 0x000000400000-0x000008000000 : "nvram"
+		 */
+
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "bootkernel1";
+			reg = <0x100000 0x300000>;
+			read-only;
+		};
+
+		partition@400000 {
+			label = "nvram";
+			reg = <0x400000 0x100000>;
+			read-only;
+		};
+
+		partition@500000 {
+			label = "bootkernel2";
+			reg = <0x500000 0x300000>;
+			read-only;
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@5 {
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	current_sense: ina219@45 {
+		compatible = "ti,ina219";
+		reg = <0x45>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@66 {
+			reg = <0x66 0x6>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch1.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch1.dtsi
new file mode 100644
index 0000000000000..c349e8f0afc57
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch1.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <1>;
+	nand-ecc-step-size = <512>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch4.dtsi
new file mode 100644
index 0000000000000..18e25e302b132
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch4.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch8.dtsi
new file mode 100644
index 0000000000000..c8e56d30bd6f5
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch8.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X Nand chip defaults.
+ *
+ * This should be included if the NAND controller is on chip select 0
+ * and uses 8 bit ECC.
+ *
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <8>;
+	nand-ecc-step-size = <512>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi
new file mode 100644
index 0000000000000..be9a00ff752d9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+/ {
+	nand-controller@18028000 {
+		nandcs: nand@0 {
+			compatible = "brcm,nandcs";
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
new file mode 100644
index 0000000000000..600a1b54f2ae5
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
@@ -0,0 +1,170 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm-ns.dtsi"
+
+/ {
+	mpcore-bus@19000000 {
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts =
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	mdio-mux@18003000 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x18003000 0x4>;
+		mux-mask = <0x200>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb3_phy: usb3-phy@10 {
+				compatible = "brcm,ns-ax-usb3-phy";
+				reg = <0x10>;
+				usb3-dmp-syscon = <&usb3_dmp>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usb3_dmp: syscon@18105000 {
+		reg = <0x18105000 0x1000>;
+	};
+
+	i2c0: i2c@18009000 {
+		compatible = "brcm,iproc-i2c";
+		reg = <0x18009000 0x50>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	dmu-bus@1800c000 {
+		cru-bus@100 {
+			lcpll0: clock-controller@100 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-lcpll0";
+				reg = <0x100 0x14>;
+				clocks = <&osc>;
+				clock-output-names = "lcpll0", "pcie_phy",
+						     "sdio", "ddr_phy";
+			};
+
+			genpll: clock-controller@140 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-genpll";
+				reg = <0x140 0x24>;
+				clocks = <&osc>;
+				clock-output-names = "genpll", "phy",
+						     "ethernetclk",
+						     "usbclk", "iprocfast",
+						     "sata1", "sata2";
+			};
+		};
+	};
+
+	spi@18029200 {
+		compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+		reg = <0x18029200 0x184>,
+		      <0x18029000 0x124>,
+		      <0x1811b408 0x004>,
+		      <0x180293a0 0x01c>;
+		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mspi_done",
+				  "mspi_halted",
+				  "spi_lr_fullness_reached",
+				  "spi_lr_session_aborted",
+				  "spi_lr_impatient",
+				  "spi_lr_session_done",
+				  "spi_lr_overread";
+		clocks = <&iprocmed>;
+		num-cs = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		spi_nor: flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+			status = "disabled";
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts
new file mode 100644
index 0000000000000..975f854f652ff
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts
@@ -0,0 +1,86 @@
+/*
+ * DTS for Unifi Switch 8 port
+ *
+ * Copyright (C) 2017 Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm-hr2.dtsi"
+
+/ {
+	compatible = "ubnt,unifi-switch8", "brcm,bcm53342", "brcm,hr2";
+	model = "Ubiquiti UniFi Switch 8 (BCM53342)";
+
+	/* Hurricane 2 designs use the second UART */
+	chosen {
+		bootargs = "console=ttyS1,115200 earlyprintk";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x68000000 0x08000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+
+	flash: flash@0 {
+		compatible = "m25p80";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <12500000>;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "u-boot-env";
+			reg = <0xc0000 0x10000>;
+		};
+
+		partition@d0000 {
+			label = "shmoo";
+			reg = <0xd0000 0x10000>;
+		};
+
+		partition@e0000 {
+			label = "kernel0";
+			reg = <0xe0000 0xf00000>;
+		};
+
+		partition@fe0000 {
+			label = "kernel1";
+			reg = <0xfe0000 0xf10000>;
+		};
+
+		partition@1ef0000 {
+			label = "cfg";
+			reg = <0x1ef0000 0x100000>;
+		};
+
+		partition@1ff0000 {
+			label = "EEPROM";
+			reg = <0x1ff0000 0x10000>;
+		};
+	};
+};
+
+&pcie0 {
+	/* Attaches to the internal switch */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53573.dtsi b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
new file mode 100644
index 0000000000000..3f03a381db0f2
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+	};
+
+	mpcore@18310000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18310000 0x00008000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x2000 0x0100>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		alp: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map =
+			/* ChipCommon */
+			<0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* IEEE 802.11 0 */
+			<0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 0 */
+			<0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 2.0 Controller */
+			<0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 0 */
+			<0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* IEEE 802.11 1 */
+			<0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon: chipcommon@0 {
+			compatible = "simple-bus";
+			reg = <0x00000000 0x1000>;
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			uart0: serial@300 {
+				compatible = "ns16550a";
+				reg = <0x0300 0x100>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&alp>;
+				status = "okay";
+			};
+		};
+
+		pcie0: pcie@2000 {
+			reg = <0x00002000 0x1000>;
+		};
+
+		usb2: usb2@4000 {
+			reg = <0x4000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ehci: usb@4000 {
+				compatible = "generic-ehci";
+				reg = <0x4000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ehci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ehci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+
+			ohci: usb@d000 {
+				#usb-cells = <0>;
+
+				compatible = "generic-ohci";
+				reg = <0xd000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ohci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ohci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		gmac0: ethernet@5000 {
+			reg = <0x5000 0x1000>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch: switch@1e {
+					compatible = "brcm,bcm53125";
+					reg = <0x1e>;
+
+					status = "disabled";
+
+					/* ports are defined in board DTS */
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+			};
+		};
+
+		gmac1: ethernet@b000 {
+			reg = <0xb000 0x1000>;
+		};
+
+		pmu@12000 {
+			compatible = "simple-mfd", "syscon";
+			reg = <0x00012000 0x00001000>;
+
+			ilp: ilp {
+				compatible = "brcm,bcm53573-ilp";
+				clocks = <&alp>;
+				#clock-cells = <0>;
+				clock-output-names = "ilp";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm59056.dtsi b/arch/arm/boot/dts/broadcom/bcm59056.dtsi
new file mode 100644
index 0000000000000..a9bb7ad81378d
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm59056.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+* Copyright 2014 Linaro Limited
+* Author: Matt Porter <mporter@linaro.org>
+*/
+
+&pmu {
+	compatible = "brcm,bcm59056";
+	regulators {
+		rfldo_reg: rfldo {
+		};
+
+		camldo1_reg: camldo1 {
+		};
+
+		camldo2_reg: camldo2 {
+		};
+
+		simldo1_reg: simldo1 {
+		};
+
+		simldo2_reg: simldo2 {
+		};
+
+		sdldo_reg: sdldo {
+		};
+
+		sdxldo_reg: sdxldo {
+		};
+
+		mmcldo1_reg: mmcldo1 {
+		};
+
+		mmcldo2_reg: mmcldo2 {
+		};
+
+		audldo_reg: audldo {
+		};
+
+		micldo_reg: micldo {
+		};
+
+		usbldo_reg: usbldo {
+		};
+
+		vibldo_reg: vibldo {
+		};
+
+		csr_reg: csr {
+		};
+
+		iosr1_reg: iosr1 {
+		};
+
+		iosr2_reg: iosr2 {
+		};
+
+		msr_reg: msr {
+		};
+
+		sdsr1_reg: sdsr1 {
+		};
+
+		sdsr2_reg: sdsr2 {
+		};
+
+		vsr_reg: vsr {
+		};
+
+		gpldo1_reg: gpldo1 {
+		};
+
+		gpldo2_reg: gpldo2 {
+		};
+
+		gpldo3_reg: gpldo3 {
+		};
+
+		gpldo4_reg: gpldo4 {
+		};
+
+		gpldo5_reg: gpldo5 {
+		};
+
+		gpldo6_reg: gpldo6 {
+		};
+
+		vbus_reg: vbus {
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm63138.dtsi b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
new file mode 100644
index 0000000000000..93281c47c9ba9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom BCM63138 DSL SoCs Device Tree
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm63138", "brcm,bcmbca";
+	model = "Broadcom BCM963138 Reference Board";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		uart0 = &serial0;
+		uart1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0>;
+			enable-method = "brcm,bcm63138";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <1>;
+			enable-method = "brcm,bcm63138";
+			resets = <&pmb0 4 1>;
+		};
+	};
+
+	clocks {
+		/* UBUS peripheral clock */
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+
+		/* peripheral clock for system timer */
+		axi_clk: axi_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/* APB bus clock */
+		apb_clk: apb_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	/* ARM bus */
+	axi@80000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x80000000 0x784000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		L2: cache-controller@1d000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x1d000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <524288>;
+			cache-sets = <1024>;
+			cache-line-size = <32>;
+			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		scu: scu@1e000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x1e000 0x100>;
+		};
+
+		gic: interrupt-controller@1f000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x1f000 0x1000
+				0x1e100 0x100>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+		};
+
+		global_timer: timer@1e200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x1e200 0x20>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&axi_clk>;
+		};
+
+		local_timer: local-timer@1e600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1e600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&axi_clk>;
+		};
+
+		twd_watchdog: watchdog@1e620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x1e620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		armpll: armpll@20000 {
+			#clock-cells = <0>;
+			compatible = "brcm,bcm63138-armpll";
+			clocks = <&periph_clk>;
+			reg = <0x20000 0xf00>;
+		};
+
+		pmb0: reset-controller@4800c0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800c0 0x10>;
+			#reset-cells = <2>;
+		};
+
+		pmb1: reset-controller@4800e0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800e0 0x10>;
+			#reset-cells = <2>;
+		};
+
+		ahci: sata@a000 {
+			compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0xa000 0x9ac>, <0x8040 0x24>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&pmb0 3 1>;
+			reset-names = "ahci";
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+		};
+
+		sata_phy: sata-phy@8100 {
+			compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3";
+			reg = <0x8100 0x1e00>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+	};
+
+	/* Legacy UBUS base */
+	ubus@fffe8000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x8100>;
+
+		timer: timer@80 {
+			compatible = "brcm,bcm6328-timer", "syscon";
+			reg = <0x80 0x3c>;
+		};
+
+		serial0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x1b>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		serial1: serial@620 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x620 0x1b>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
+			reg = <0x2000 0x600>, <0xf0 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nand";
+		};
+
+		bootlut: bootlut@8000 {
+			compatible = "brcm,bcm63138-bootlut";
+			reg = <0x8000 0x50>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&timer>;
+			offset = <0x34>;
+			mask = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm63148.dtsi b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
new file mode 100644
index 0000000000000..24431de1810ed
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63148", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		B15_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B15_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B15_0>, <&B15_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@80030000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80030000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x8000>;
+
+		uart0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x20>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm63178.dtsi b/arch/arm/boot/dts/broadcom/bcm63178.dtsi
new file mode 100644
index 0000000000000..3f9aed96babfc
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63178.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63178", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6756.dtsi b/arch/arm/boot/dts/broadcom/bcm6756.dtsi
new file mode 100644
index 0000000000000..1d8d957d65dd0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6756.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6756", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6846.dtsi b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
new file mode 100644
index 0000000000000..cf92cf8c46933
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6846", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x1b>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6855.dtsi b/arch/arm/boot/dts/broadcom/bcm6855.dtsi
new file mode 100644
index 0000000000000..52d6bc89f9f82
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6855.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6855", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6878.dtsi b/arch/arm/boot/dts/broadcom/bcm6878.dtsi
new file mode 100644
index 0000000000000..2c5d706bac7e3
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6878.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6878", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/broadcom/bcm7445-bcm97445svmb.dts
new file mode 100644
index 0000000000000..f92d2cf859726
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm7445-bcm97445svmb.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm7445.dtsi"
+
+/ {
+	model = "Broadcom STB (bcm7445), SVMB reference board";
+	compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00000000 0x00 0x40000000>,
+		      <0x00 0x40000000 0x00 0x40000000>,
+		      <0x00 0x80000000 0x00 0x40000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@1 {
+		compatible = "brcm,nandcs";
+		reg = <1>;
+		nand-ecc-step-size = <512>;
+		nand-ecc-strength = <8>;
+		nand-on-flash-bbt;
+
+		#size-cells = <2>;
+		#address-cells = <2>;
+
+		flash1.rootfs0@0 {
+			reg = <0x0 0x0 0x0 0x80000000>;
+		};
+
+		flash1.rootfs1@80000000 {
+			reg = <0x0 0x80000000 0x0 0x80000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm7445.dtsi b/arch/arm/boot/dts/broadcom/bcm7445.dtsi
new file mode 100644
index 0000000000000..5ac2042515b8f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm7445.dtsi
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Broadcom STB (bcm7445)";
+	compatible = "brcm,bcm7445", "brcm,brcmstb";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <3>;
+		};
+	};
+
+	gic: interrupt-controller@ffd00000 {
+		compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic";
+		reg = <0x00 0xffd01000 0x00 0x1000>,
+		      <0x00 0xffd02000 0x00 0x2000>,
+		      <0x00 0xffd04000 0x00 0x2000>,
+		      <0x00 0xffd06000 0x00 0x2000>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	rdb@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0x00 0xf0000000 0x1000000>;
+
+		serial@40ab00 {
+			compatible = "ns16550a";
+			reg = <0x40ab00 0x20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <81000000>;
+		};
+
+		sun_top_ctrl: syscon@404000 {
+			compatible = "brcm,bcm7445-sun-top-ctrl",
+				     "syscon";
+			reg = <0x404000 0x51c>;
+		};
+
+		hif_cpubiuctrl: syscon@3e2400 {
+			compatible = "brcm,bcm7445-hif-cpubiuctrl",
+				     "syscon";
+			reg = <0x3e2400 0x5b4>;
+		};
+
+		hif_continuation: syscon@452000 {
+			compatible = "brcm,bcm7445-hif-continuation",
+				     "syscon";
+			reg = <0x452000 0x100>;
+		};
+
+		irq0_intc: interrupt-controller@40a780 {
+			compatible = "brcm,bcm7120-l2-intc";
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <1>;
+			reg = <0x40a780 0x8>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 0x45 0x0>,
+				     <GIC_SPI 0x43 0x0>;
+			brcm,int-map-mask = <0x25c>, <0x7000000>;
+			brcm,int-fwd-mask = <0x70000>;
+		};
+
+		irq0_aon_intc: interrupt-controller@417280 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x417280 0x8>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 0x46 0x0>,
+				     <GIC_SPI 0x44 0x0>,
+				     <GIC_SPI 0x49 0x0>;
+			brcm,int-map-mask = <0x1e3 0x18000000 0x100000>;
+			brcm,int-fwd-mask = <0x0>;
+			brcm,irq-can-wake;
+		};
+
+		hif_intr2_intc: interrupt-controller@3e1000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x3e1000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 0x20 0x0>;
+			interrupt-parent = <&gic>;
+			interrupt-names = "hif";
+		};
+
+                aon_pm_l2_intc: interrupt-controller@410640 {
+			compatible = "brcm,l2-intc";
+			reg = <0x410640 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 0x40 0x0>;
+			interrupt-parent = <&gic>;
+			brcm,irq-can-wake;
+		};
+
+		aon-ctrl@410000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x410000 0x200>, <0x410200 0x400>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		nand_controller: nand-controller@3e2800 {
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg-names = "nand", "flash-dma";
+			reg = <0x3e2800 0x600>, <0x3e3000 0x2c>;
+			interrupt-parent = <&hif_intr2_intc>;
+			interrupts = <24>, <4>;
+			interrupt-names = "nand_ctlrdy", "flash_dma_done";
+		};
+
+		sata@45a000 {
+			compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x45a000 0xa9c>, <0x458040 0x24>;
+			interrupts = <GIC_SPI 30 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@458100 {
+			compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+			reg = <0x458100 0x1f00>;
+			reg-names = "phy";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		upg_gio: gpio@40a700 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x40a700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 24>;
+		};
+
+		upg_gio_aon: gpio@4172c0 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x4172c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupts-extended = <&irq0_aon_intc 0x6>,
+					      <&aon_pm_l2_intc 0x5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
+	};
+
+	memory_controllers@f1100000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0xf1100000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memc@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+				};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@80000 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@100000 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+	};
+
+	sram@ffe00000 {
+		compatible = "brcm,boot-sram", "mmio-sram";
+		reg = <0x0 0xffe00000 0x0 0x10000>;
+	};
+
+	smpboot {
+		compatible = "brcm,brcmstb-smpboot";
+		syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+		syscon-cont = <&hif_continuation>;
+	};
+
+	reboot {
+		compatible = "brcm,brcmstb-reboot";
+		syscon = <&sun_top_ctrl 0x304 0x308>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm911360_entphn.dts b/arch/arm/boot/dts/broadcom/bcm911360_entphn.dts
new file mode 100644
index 0000000000000..363009e747b38
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm911360_entphn.dts
@@ -0,0 +1,99 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+#include "dt-bindings/input/input.h"
+
+/ {
+	model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
+	compatible = "brcm,bcm11360", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-hook {
+			label = "HOOK";
+			linux,code = <KEY_O>;
+			gpios = <&gpio_asiu 48 0>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&v3d {
+	assigned-clocks =
+		<&mipipll BCM_CYGNUS_MIPIPLL>,
+		<&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+	assigned-clock-rates = <525000000>, <300000000>;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm911360k.dts b/arch/arm/boot/dts/broadcom/bcm911360k.dts
new file mode 100644
index 0000000000000..091c73a46e08b
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm911360k.dts
@@ -0,0 +1,52 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+	model = "Cygnus SVK (BCM911360K)";
+	compatible = "brcm,bcm11360", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm94708.dts b/arch/arm/boot/dts/broadcom/bcm94708.dts
new file mode 100644
index 0000000000000..d9eb2040b9631
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm94708.dts
@@ -0,0 +1,49 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM94708)";
+	compatible = "brcm,bcm94708", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm94709.dts b/arch/arm/boot/dts/broadcom/bcm94709.dts
new file mode 100644
index 0000000000000..618c812eef73e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm94709.dts
@@ -0,0 +1,49 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM94709)";
+	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts b/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts
new file mode 100644
index 0000000000000..3709baa2376f5
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Broadcom BCM947189ACDBMR";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 21 0>;
+		gpio-miso = <&chipcommon 22 0>;
+		gpio-mosi = <&chipcommon 23 0>;
+		cs-gpios = <&chipcommon 24 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* External BCM6802 MoCA chip is connected */
+	};
+};
+
+&pcie0 {
+	ranges = <0x00000000 0 0 0 0 0x00100000>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ranges = <0x00000000 0 0 0 0x00100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm947622.dts b/arch/arm/boot/dts/broadcom/bcm947622.dts
new file mode 100644
index 0000000000000..93b8ce22678d3
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm947622.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm47622.dtsi"
+
+/ {
+	model = "Broadcom BCM947622 Reference Board";
+	compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm953012er.dts b/arch/arm/boot/dts/broadcom/bcm953012er.dts
new file mode 100644
index 0000000000000..4fe3b36533767
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm953012er.dts
@@ -0,0 +1,92 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	model = "NorthStar Enterprise Router (BCM953012ER)";
+	compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "port0";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "port1";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm953012hr.dts b/arch/arm/boot/dts/broadcom/bcm953012hr.dts
new file mode 100644
index 0000000000000..b070b69466bd2
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm953012hr.dts
@@ -0,0 +1,102 @@
+/*
+ *  SPDX-License-Identifier: BSD-3-Clause
+ *
+ *  Copyright(c) 2017 Broadcom
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its contributors
+ *      may be used to endorse or promote products derived from this
+ *      software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	model = "NorthStar HR (BCM953012HR)";
+	compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&nandcs {
+	partition@0 {
+		label = "nboot";
+		reg = <0x00000000 0x00200000>;
+		read-only;
+	};
+	partition@200000 {
+		label = "nenv";
+		reg = <0x00200000 0x00400000>;
+	};
+	partition@600000 {
+		label = "nsystem";
+		reg = <0x00600000 0x00a00000>;
+	};
+	partition@1000000 {
+		label = "nrootfs";
+		reg = <0x01000000 0x07000000>;
+	};
+};
+
+&spi_nor {
+	status = "okay";
+	spi-max-frequency = <62500000>;
+	m25p,default-addr-width = <3>;
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	partition@0 {
+		label = "boot";
+		reg = <0x00000000 0x000d0000>;
+	};
+	partition@d000 {
+		label = "env";
+		reg = <0x000d0000 0x00030000>;
+	};
+	partition@100000 {
+		label = "system";
+		reg = <0x00100000 0x00600000>;
+	};
+	partition@700000 {
+		label = "rootfs";
+		reg = <0x00700000 0x00900000>;
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm953012k.dts b/arch/arm/boot/dts/broadcom/bcm953012k.dts
new file mode 100644
index 0000000000000..f1e6bcaa1eddc
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm953012k.dts
@@ -0,0 +1,120 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM953012K)";
+	compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x07000000>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+	spi-max-frequency = <62500000>;
+	m25p,default-addr-width = <3>;
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	partition@0 {
+		label = "boot";
+		reg = <0x00000000 0x000d0000>;
+	};
+	partition@d000 {
+		label = "env";
+		reg = <0x000d0000 0x00030000>;
+	};
+	partition@100000 {
+		label = "system";
+		reg = <0x00100000 0x00600000>;
+	};
+	partition@700000 {
+		label = "rootfs";
+		reg = <0x00700000 0x00900000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958300k.dts b/arch/arm/boot/dts/broadcom/bcm958300k.dts
new file mode 100644
index 0000000000000..dda3e11b711f6
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958300k.dts
@@ -0,0 +1,77 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
+
+/ {
+	model = "Cygnus SVK (BCM958300K)";
+	compatible = "brcm,bcm58300", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958305k.dts b/arch/arm/boot/dts/broadcom/bcm958305k.dts
new file mode 100644
index 0000000000000..ea3c6b88b313b
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958305k.dts
@@ -0,0 +1,85 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
+
+/ {
+	model = "Cygnus Wireless Audio (BCM958305K)";
+	compatible = "brcm,bcm58305", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958522er.dts b/arch/arm/boot/dts/broadcom/bcm958522er.dts
new file mode 100644
index 0000000000000..15f023656df00
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958522er.dts
@@ -0,0 +1,185 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958522ER)";
+	compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58522-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958525er.dts b/arch/arm/boot/dts/broadcom/bcm958525er.dts
new file mode 100644
index 0000000000000..9b9c225a1fb39
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958525er.dts
@@ -0,0 +1,197 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958525ER)";
+	compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958525xmc.dts b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts
new file mode 100644
index 0000000000000..ca9311452739e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts
@@ -0,0 +1,217 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus XMC (BCM958525xmc)";
+	compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 31 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* XHCI support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "adi,adt7461a";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "st,m41t81";
+		reg = <0x68>;
+	};
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sdio {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958622hr.dts b/arch/arm/boot/dts/broadcom/bcm958622hr.dts
new file mode 100644
index 0000000000000..9db3c851451a0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958622hr.dts
@@ -0,0 +1,227 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958622HR)";
+	compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 and SLIC support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58622-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958623hr.dts b/arch/arm/boot/dts/broadcom/bcm958623hr.dts
new file mode 100644
index 0000000000000..32786e7c4e12e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958623hr.dts
@@ -0,0 +1,231 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958623HR)";
+	compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 and SLIC support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
new file mode 100644
index 0000000000000..c54451dde6dd4
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+	keys {
+		compatible = "gpio-keys-polled";
+		autorepeat;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* green:wan1-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* green:wan1-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* green:wan2-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* green:wan2-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* amber:power */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			/* white:status */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&axi {
+	mdio-mux@3f1c0 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		reg = <0x3f1c0 0x4>;
+		mux-mask = <0x2000>;
+		mdio-parent-bus = <&mdio_ext>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port6: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port7: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port8: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port9: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port10: phy@4 {
+				reg = <4>;
+			};
+
+			switch@10 {
+				compatible = "qca,qca8337";
+				reg = <0x10>;
+				dsa,member = <1 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						ethernet = <&sgmii1>;
+						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan8";
+						phy-handle = <&phy_port6>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan9";
+						phy-handle = <&phy_port7>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan10";
+						phy-handle = <&phy_port8>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan11";
+						phy-handle = <&phy_port9>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan12";
+						phy-handle = <&phy_port10>;
+					};
+				};
+			};
+		};
+
+		mdio-mii@2000 {
+			reg = <0x2000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+
+			switch@10 {
+				compatible = "qca,qca8337";
+				reg = <0x10>;
+				dsa,member = <2 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						ethernet = <&sgmii0>;
+						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan3";
+						phy-handle = <&phy_port1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan4";
+						phy-handle = <&phy_port2>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan5";
+						phy-handle = <&phy_port3>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan6";
+						phy-handle = <&phy_port4>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan7";
+						phy-handle = <&phy_port5>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		port@0 {
+			label = "wan1";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "wan2";
+			reg = <1>;
+		};
+
+		sgmii0: port@4 {
+			label = "sw0";
+			reg = <4>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		sgmii1: port@5 {
+			label = "sw1";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
new file mode 100644
index 0000000000000..1830844c84048
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+
+	keys {
+		compatible = "gpio-keys-polled";
+		autorepeat;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* green:lan1-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* green:lan1-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* green:lan2-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* green:lan2-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* green:lan3-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			/* green:lan3-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <5>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			/* green:lan4-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			/* green:lan4-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <7>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led-8 {
+			/* green:wan-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <8>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			/* green:wan-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <9>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
+		};
+
+		led-a {
+			/* amber:power */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-b {
+			/* white:status */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "lan2";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "lan3";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "lan4";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "wan";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts
new file mode 100644
index 0000000000000..9944566c1195f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64(A0)";
+	compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts
new file mode 100644
index 0000000000000..06939438e8747
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64";
+	compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts
new file mode 100644
index 0000000000000..112fddb1eed89
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64W(A0)";
+	compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts
new file mode 100644
index 0000000000000..de2e367c3e788
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64W";
+	compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts
new file mode 100644
index 0000000000000..d1b684dcdbfaa
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+	model = "Cisco Meraki MX65";
+	compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts
new file mode 100644
index 0000000000000..a2165aba36766
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65W.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+	model = "Cisco Meraki MX65W";
+	compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
new file mode 100644
index 0000000000000..b0854d881ac68
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			pwms = <&pwm 1 50000>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			pwms = <&pwm 2 50000>;
+			max-brightness = <255>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 3 50000>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&amac2 {
+	status = "okay";
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@66 {
+			reg = <0x66 0x6>;
+		};
+	};
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "shmoo";
+			reg = <0x80000 0x80000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "bootkernel1";
+			reg = <0x100000 0x300000>;
+		};
+
+		partition@400000 {
+			label = "nvram";
+			reg = <0x400000 0x100000>;
+		};
+
+		partition@500000 {
+			label = "bootkernel2";
+			reg = <0x500000 0x300000>;
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x3f700000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_leds>;
+
+	pwm_leds: pwm_leds {
+		function = "pwm";
+		groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
+	};
+};
+
+&pwm {
+	status = "okay";
+	#pwm-cells = <2>;
+};
+
+&uart0 {
+	clock-frequency = <62500000>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625hr.dts b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
new file mode 100644
index 0000000000000..74263d98de73b
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
@@ -0,0 +1,254 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958625HR)";
+	compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			label = "sfp";
+			phy-mode = "sgmii";
+			reg = <5>;
+			sfp = <&sfp>;
+			managed = "in-band-status";
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625k.dts b/arch/arm/boot/dts/broadcom/bcm958625k.dts
new file mode 100644
index 0000000000000..69ebc7a913a73
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625k.dts
@@ -0,0 +1,271 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+
+/ {
+	model = "NorthStar Plus SVK (BCM958625K)";
+	compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>, <&gpiobs>, <&pwmc>;
+
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+
+	gpiobs: gpiobs {
+		function = "gpio_b";
+		groups = "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp",
+			 "gpio_b_3_grp";
+	};
+
+	pwmc: pwmc {
+		function = "pwm";
+		groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp";
+	};
+
+	emmc_sel: emmc_sel {
+		function = "emmc";
+		groups = "emmc_grp";
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+/*
+ * By default the sd slot is functional. For emmc to work add "<&emmc_sel>"
+ * and delete "<&nand_sel>" in "pinctrl-0" property of pinctrl node. Remove the
+ * bus-width property here and disable the nand node with status = "disabled";.
+ *
+ * Ex: pinctrl-0 = <&emmc_sel>, <&gpiobs>, <&pwmc>;
+ */
+&sdio {
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963138.dts b/arch/arm/boot/dts/broadcom/bcm963138.dts
new file mode 100644
index 0000000000000..1b405c2492137
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963138.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	model = "Broadcom BCM963138 Reference Board";
+	compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963138dvt.dts b/arch/arm/boot/dts/broadcom/bcm963138dvt.dts
new file mode 100644
index 0000000000000..b5af61853a072
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963138dvt.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom BCM63138 Reference Board DTS
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	compatible = "brcm,BCM963138DVT", "brcm,bcm63138", "brcm,bcmbca";
+	model = "Broadcom BCM963138DVT";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		brcm,nand-oob-sectors-size = <16>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963148.dts b/arch/arm/boot/dts/broadcom/bcm963148.dts
new file mode 100644
index 0000000000000..1f5d6d783f090
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963148.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63148.dtsi"
+
+/ {
+	model = "Broadcom BCM963148 Reference Board";
+	compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963178.dts b/arch/arm/boot/dts/broadcom/bcm963178.dts
new file mode 100644
index 0000000000000..d036e99dd8d16
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963178.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63178.dtsi"
+
+/ {
+	model = "Broadcom BCM963178 Reference Board";
+	compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96756.dts b/arch/arm/boot/dts/broadcom/bcm96756.dts
new file mode 100644
index 0000000000000..8b104f3fb14ae
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96756.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6756.dtsi"
+
+/ {
+	model = "Broadcom BCM96756 Reference Board";
+	compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96846.dts b/arch/arm/boot/dts/broadcom/bcm96846.dts
new file mode 100644
index 0000000000000..55852c2296087
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96846.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+
+/ {
+	model = "Broadcom BCM96846 Reference Board";
+	compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96855.dts b/arch/arm/boot/dts/broadcom/bcm96855.dts
new file mode 100644
index 0000000000000..2ad880af21044
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96855.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6855.dtsi"
+
+/ {
+	model = "Broadcom BCM96855 Reference Board";
+	compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96878.dts b/arch/arm/boot/dts/broadcom/bcm96878.dts
new file mode 100644
index 0000000000000..b7af8ade7a9d0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96878.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6878.dtsi"
+
+/ {
+	model = "Broadcom BCM96878 Reference Board";
+	compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm988312hr.dts b/arch/arm/boot/dts/broadcom/bcm988312hr.dts
new file mode 100644
index 0000000000000..e96bc3f2d5cfa
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm988312hr.dts
@@ -0,0 +1,231 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM988312HR)";
+	compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm88312-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm9hmidc.dtsi b/arch/arm/boot/dts/broadcom/bcm9hmidc.dtsi
new file mode 100644
index 0000000000000..65397c0883355
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm9hmidc.dtsi
@@ -0,0 +1,42 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Broadcom human machine interface daughter card (bcm9hmidc) installed on
+ * bcm958300k/bcm958305k boards
+ */
+
+&touchscreen {
+	touchscreen-inverted-x;
+	touchscreen-inverted-y;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/calxeda/Makefile b/arch/arm/boot/dts/calxeda/Makefile
new file mode 100644
index 0000000000000..f5126b6d26adc
--- /dev/null
+++ b/arch/arm/boot/dts/calxeda/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HIGHBANK) += \
+	highbank.dtb \
+	ecx-2000.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += \
+	highbank.dtb \
+	ecx-2000.dtb
diff --git a/arch/arm/boot/dts/calxeda/ecx-2000.dts b/arch/arm/boot/dts/calxeda/ecx-2000.dts
new file mode 100644
index 0000000000000..f6eb71553b952
--- /dev/null
+++ b/arch/arm/boot/dts/calxeda/ecx-2000.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+	model = "Calxeda ECX-2000";
+	compatible = "calxeda,ecx-2000";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0xff800000>;
+	};
+
+	memory@200000000 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x00000002 0x00000000 0x00000003 0x00000000>;
+	};
+
+	soc {
+		ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>;
+
+		timer {
+			compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; 			interrupts = <1 13 0xf08>,
+				<1 14 0xf08>,
+				<1 11 0xf08>,
+				<1 10 0xf08>;
+		};
+
+		memory-controller@fff00000 {
+			compatible = "calxeda,ecx-2000-ddr-ctrl";
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 91 4>;
+		};
+
+		intc: interrupt-controller@fff11000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <1 9 0xf04>;
+			reg = <0xfff11000 0x1000>,
+			      <0xfff12000 0x2000>,
+			      <0xfff14000 0x2000>,
+			      <0xfff16000 0x2000>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
+		};
+	};
+};
+
+/include/ "ecx-common.dtsi"
diff --git a/arch/arm/boot/dts/calxeda/ecx-common.dtsi b/arch/arm/boot/dts/calxeda/ecx-common.dtsi
new file mode 100644
index 0000000000000..ce5221c6b358e
--- /dev/null
+++ b/arch/arm/boot/dts/calxeda/ecx-common.dtsi
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ */
+
+/ {
+	chosen {
+		bootargs = "console=ttyAMA0";
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000002>;
+		cpu_off = <0x84000004>;
+		cpu_on = <0x84000006>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+
+		sata@ffe08000 {
+			compatible = "calxeda,hb-ahci";
+			reg = <0xffe08000 0x10000>;
+			interrupts = <0 83 4>;
+			dma-coherent;
+			calxeda,port-phys = < &combophy5 0>, <&combophy0 0>,
+					     <&combophy0 1>, <&combophy0 2>,
+					     <&combophy0 3>;
+			calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>,
+					    <&gpioh 7 1>;
+			calxeda,led-order = <4 0 1 2 3>;
+		};
+
+		sdhci@ffe0e000 {
+			compatible = "calxeda,hb-sdhci";
+			reg = <0xffe0e000 0x1000>;
+			interrupts = <0 90 4>;
+			clocks = <&eclk>;
+			status = "disabled";
+		};
+
+		ipc@fff20000 {
+			compatible = "arm,pl320", "arm,primecell";
+			reg = <0xfff20000 0x1000>;
+			interrupts = <0 7 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpioe: gpio@fff30000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff30000 0x1000>;
+			interrupts = <0 14 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpiof: gpio@fff31000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff31000 0x1000>;
+			interrupts = <0 15 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpiog: gpio@fff32000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff32000 0x1000>;
+			interrupts = <0 16 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpioh: gpio@fff33000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff33000 0x1000>;
+			interrupts = <0 17 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		timer@fff34000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xfff34000 0x1000>;
+			interrupts = <0 18 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc@fff35000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0xfff35000 0x1000>;
+			interrupts = <0 19 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		serial@fff36000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xfff36000 0x1000>;
+			interrupts = <0 20 4>;
+			clocks = <&pclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		smic@fff3a000 {
+			compatible = "ipmi-smic";
+			device_type = "ipmi";
+			reg = <0xfff3a000 0x1000>;
+			interrupts = <0 24 4>;
+			reg-size = <4>;
+			reg-spacing = <4>;
+		};
+
+		sregs@fff3c000 {
+			compatible = "calxeda,hb-sregs";
+			reg = <0xfff3c000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				osc: oscillator {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <33333000>;
+				};
+
+				ddrpll: ddrpll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x108>;
+				};
+
+				a9pll: a9pll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x100>;
+				};
+
+				a9periphclk: a9periphclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-a9periph-clock";
+					clocks = <&a9pll>;
+					reg = <0x104>;
+				};
+
+				a9bclk: a9bclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-a9bus-clock";
+					clocks = <&a9pll>;
+					reg = <0x104>;
+				};
+
+				emmcpll: emmcpll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x10C>;
+				};
+
+				eclk: eclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-emmc-clock";
+					clocks = <&emmcpll>;
+					reg = <0x114>;
+				};
+
+				pclk: pclk {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <150000000>;
+				};
+			};
+		};
+
+		dma@fff3d000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xfff3d000 0x1000>;
+			interrupts = <0 92 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		ethernet@fff50000 {
+			compatible = "calxeda,hb-xgmac";
+			reg = <0xfff50000 0x1000>;
+			interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
+			dma-coherent;
+		};
+
+		ethernet@fff51000 {
+			compatible = "calxeda,hb-xgmac";
+			reg = <0xfff51000 0x1000>;
+			interrupts = <0 80 4>, <0 81 4>, <0 82 4>;
+			dma-coherent;
+		};
+
+		combophy0: combo-phy@fff58000 {
+			compatible = "calxeda,hb-combophy";
+			#phy-cells = <1>;
+			reg = <0xfff58000 0x1000>;
+			phydev = <5>;
+		};
+
+		combophy5: combo-phy@fff5d000 {
+			compatible = "calxeda,hb-combophy";
+			#phy-cells = <1>;
+			reg = <0xfff5d000 0x1000>;
+			phydev = <31>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/calxeda/highbank.dts b/arch/arm/boot/dts/calxeda/highbank.dts
new file mode 100644
index 0000000000000..b6b0225a769e6
--- /dev/null
+++ b/arch/arm/boot/dts/calxeda/highbank.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+	model = "Calxeda Highbank";
+	compatible = "calxeda,highbank";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@900 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x900>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
+		};
+
+		cpu@901 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x901>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
+		};
+
+		cpu@902 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x902>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
+		};
+
+		cpu@903 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x903>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
+		};
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x00000000 0xff900000>;
+	};
+
+	soc {
+		ranges = <0x00000000 0x00000000 0xffffffff>;
+
+		memory-controller@fff00000 {
+			compatible = "calxeda,hb-ddr-ctrl";
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 91 4>;
+		};
+
+		timer@fff10600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xfff10600 0x20>;
+			interrupts = <1 13 0xf01>;
+			clocks = <&a9periphclk>;
+		};
+
+		watchdog@fff10620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xfff10620 0x20>;
+			interrupts = <1 14 0xf01>;
+			clocks = <&a9periphclk>;
+		};
+
+		intc: interrupt-controller@fff11000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0xfff11000 0x1000>,
+			      <0xfff10100 0x100>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,pl310-cache";
+			reg = <0xfff12000 0x1000>;
+			interrupts = <0 70 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
+		};
+
+
+		sregs@fff3c200 {
+			compatible = "calxeda,hb-sregs-l2-ecc";
+			reg = <0xfff3c200 0x100>;
+			interrupts = <0 71 4>, <0 72 4>;
+		};
+
+	};
+};
+
+/include/ "ecx-common.dtsi"
diff --git a/arch/arm/boot/dts/cirrus/Makefile b/arch/arm/boot/dts/cirrus/Makefile
new file mode 100644
index 0000000000000..e944d3e2129db
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+	ep7211-edb7211.dtb
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+	ep7211-edb7211.dtb
diff --git a/arch/arm/boot/dts/cirrus/ep7209.dtsi b/arch/arm/boot/dts/cirrus/ep7209.dtsi
new file mode 100644
index 0000000000000..57bdad2c19947
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep7209.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+
+#include <dt-bindings/clock/clps711x-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Cirrus Logic EP7209";
+	compatible = "cirrus,ep7209";
+
+	chosen { };
+
+	aliases {
+		gpio0 = &porta;
+		gpio1 = &portb;
+		gpio3 = &portd;
+		gpio4 = &porte;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		spi0 = &spi;
+		timer0 = &timer1;
+		timer1 = &timer2;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm720t";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		clks: clks@80000000 {
+			#clock-cells = <1>;
+			compatible = "cirrus,ep7209-clk";
+			reg = <0x80000000 0xc000>;
+			startup-frequency = <73728000>;
+		};
+
+		intc: intc@80000000 {
+			compatible = "cirrus,ep7209-intc";
+			reg = <0x80000000 0x4000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		porta: gpio@80000000 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000000 0x1 0x80000040 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		portb: gpio@80000001 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000001 0x1 0x80000041 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		portd: gpio@80000003 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000003 0x1 0x80000043 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		porte: gpio@80000083 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000083 0x1 0x800000c3 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		syscon1: syscon@80000100 {
+			compatible = "cirrus,ep7209-syscon1", "syscon";
+			reg = <0x80000100 0x80>;
+		};
+
+		bus: bus@80000180 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "cirrus,ep7209-bus", "simple-bus";
+			clocks = <&clks CLPS711X_CLK_BUS>;
+			reg = <0x80000180 0x80>;
+			ranges = <
+				0 0 0x00000000 0x10000000
+				1 0 0x10000000 0x10000000
+				2 0 0x20000000 0x10000000
+				3 0 0x30000000 0x10000000
+				4 0 0x40000000 0x10000000
+				5 0 0x50000000 0x10000000
+				6 0 0x60000000 0x0000c000
+				7 0 0x70000000 0x00000080
+			>;
+		};
+
+		fb: fb@800002c0 {
+			compatible = "cirrus,ep7209-fb";
+			reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
+			clocks = <&clks CLPS711X_CLK_BUS>;
+			syscon = <&syscon1>;
+			status = "disabled";
+		};
+
+		timer1: timer@80000300 {
+			compatible = "cirrus,ep7209-timer";
+			reg = <0x80000300 0x4>;
+			clocks = <&clks CLPS711X_CLK_TIMER1>;
+			interrupts = <8>;
+		};
+
+		timer2: timer@80000340 {
+			compatible = "cirrus,ep7209-timer";
+			reg = <0x80000340 0x4>;
+			clocks = <&clks CLPS711X_CLK_TIMER2>;
+			interrupts = <9>;
+		};
+
+		pwm: pwm@80000400 {
+			compatible = "cirrus,ep7209-pwm";
+			reg = <0x80000400 0x4>;
+			clocks = <&clks CLPS711X_CLK_PWM>;
+			#pwm-cells = <1>;
+		};
+
+		uart1: serial@80000480 {
+			compatible = "cirrus,ep7209-uart";
+			reg = <0x80000480 0x80>;
+			interrupts = <12 13>;
+			clocks = <&clks CLPS711X_CLK_UART>;
+			syscon = <&syscon1>;
+		};
+
+		spi: spi@80000500 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "cirrus,ep7209-spi";
+			reg = <0x80000500 0x4>;
+			interrupts = <15>;
+			clocks = <&clks CLPS711X_CLK_SPI>;
+			syscon = <&syscon3>;
+			status = "disabled";
+		};
+
+		syscon2: syscon@80001100 {
+			compatible = "cirrus,ep7209-syscon2", "syscon";
+			reg = <0x80001100 0x80>;
+		};
+
+		uart2: serial@80001480 {
+			compatible = "cirrus,ep7209-uart";
+			reg = <0x80001480 0x80>;
+			interrupts = <28 29>;
+			clocks = <&clks CLPS711X_CLK_UART>;
+			syscon = <&syscon2>;
+		};
+
+		dai: dai@80002000 {
+			#sound-dai-cells = <0>;
+			compatible = "cirrus,ep7209-dai";
+			reg = <0x80002000 0x604>;
+			clocks = <&clks CLPS711X_CLK_PLL>;
+			clock-names = "pll";
+			interrupts = <32>;
+			syscon = <&syscon3>;
+			status = "disabled";
+		};
+
+		syscon3: syscon@80002200 {
+			compatible = "cirrus,ep7209-syscon3", "syscon";
+			reg = <0x80002200 0x40>;
+		};
+	};
+
+	keypad: keypad {
+		compatible = "cirrus,ep7209-keypad";
+		interrupt-parent = <&intc>;
+		interrupts = <16>;
+		syscon = <&syscon1>;
+		status = "disabled";
+	};
+
+	mctrl: mctrl {
+		compatible = "cirrus,ep7209-mctrl-gpio";
+		gpio,syscon-dev = <&syscon1 0 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
new file mode 100644
index 0000000000000..7fb532f227afb
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ep7211.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cirrus Logic EP7211 Development Board";
+	compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x02000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0>;
+		brightness-levels = <
+			0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
+			0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf
+		>;
+		default-brightness-level = <0x0>;
+		power-supply = <&blen>;
+	};
+
+	display: display {
+		model = "320x240x4";
+		bits-per-pixel = <4>;
+		ac-prescale = <17>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 320x240 {
+				hactive = <320>;
+				hback-porch = <0>;
+				hfront-porch = <0>;
+				hsync-len = <0>;
+				vactive = <240>;
+				vback-porch = <0>;
+				vfront-porch = <0>;
+				vsync-len = <0>;
+				clock-frequency = <6500000>;
+			};
+		};
+	};
+
+	i2c: i2c {
+		compatible = "i2c-gpio";
+		gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
+			<&portd 5 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		i2c-gpio,scl-output-only;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	lcddc: lcddc {
+		compatible = "regulator-fixed";
+		regulator-name = "BACKLIGHT ENABLE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&portd 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	blen: blen {
+		compatible = "regulator-fixed";
+		regulator-name = "BACKLIGHT ENABLE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&portd 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bus {
+	flash: nor@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&fb {
+	display = <&display>;
+	lcd-supply = <&lcddc>;
+	status = "okay";
+};
+
+&portd {
+	lcden {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LCD ENABLE";
+	};
+};
diff --git a/arch/arm/boot/dts/cirrus/ep7211.dtsi b/arch/arm/boot/dts/cirrus/ep7211.dtsi
new file mode 100644
index 0000000000000..32a4e12371457
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep7211.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ep7209.dtsi"
+
+/ {
+	model = "Cirrus Logic EP7211";
+	compatible = "cirrus,ep7211", "cirrus,ep7209";
+};
diff --git a/arch/arm/boot/dts/cnxt/Makefile b/arch/arm/boot/dts/cnxt/Makefile
new file mode 100644
index 0000000000000..d49df53f65a16
--- /dev/null
+++ b/arch/arm/boot/dts/cnxt/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_DIGICOLOR) += \
+	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_DIGICOLOR) += \
+	cx92755_equinox.dtb
diff --git a/arch/arm/boot/dts/cnxt/cx92755.dtsi b/arch/arm/boot/dts/cnxt/cx92755.dtsi
new file mode 100644
index 0000000000000..227675fbe8208
--- /dev/null
+++ b/arch/arm/boot/dts/cnxt/cx92755.dtsi
@@ -0,0 +1,144 @@
+/*
+ * Device Tree Include file for the Conexant Digicolor CX92755 SoC
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ *  Copyright (C) 2014 Paradox Innovation Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "cnxt,cx92755";
+
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
+	};
+
+	main_clk: main_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency  = <200000000>;
+	};
+
+	intc: interrupt-controller@f0000040 {
+		compatible = "cnxt,cx92755-ic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf0000040 0x40>;
+		syscon = <&uc_regs>;
+	};
+
+	timer@f0000fc0 {
+		compatible = "cnxt,cx92755-timer";
+		reg = <0xf0000fc0 0x40>;
+		interrupts = <19>, <31>, <34>, <35>, <52>, <53>, <54>, <55>;
+		clocks = <&main_clk>;
+	};
+
+	rtc@f0000c30 {
+		compatible = "cnxt,cx92755-rtc";
+		reg = <0xf0000c30 0x18>;
+		interrupts = <25>;
+	};
+
+	watchdog@f0000fc0 {
+		compatible = "cnxt,cx92755-wdt";
+		reg = <0xf0000fc0 0x8>;
+		clocks = <&main_clk>;
+		timeout-sec = <15>;
+	};
+
+	pinctrl: pinctrl@f0000e20 {
+		compatible = "cnxt,cx92755-pinctrl";
+		reg = <0xf0000e20 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	uc_regs: syscon@f00003a0 {
+		compatible = "cnxt,cx92755-uc", "syscon";
+		reg = <0xf00003a0 0x10>;
+	};
+
+	uart0: serial@f0000740 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000740 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <44>;
+		status = "disabled";
+	};
+
+	uart1: serial@f0000760 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000760 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <45>;
+		status = "disabled";
+	};
+
+	uart2: serial@f0000780 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000780 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <46>;
+		status = "disabled";
+	};
+
+	i2c: i2c@f0000120 {
+		compatible = "cnxt,cx92755-i2c";
+		reg = <0xf0000120 0x10>;
+		interrupts = <28>;
+		clocks = <&main_clk>;
+		clock-frequency = <100000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/cnxt/cx92755_equinox.dts b/arch/arm/boot/dts/cnxt/cx92755_equinox.dts
new file mode 100644
index 0000000000000..026f556c8c503
--- /dev/null
+++ b/arch/arm/boot/dts/cnxt/cx92755_equinox.dts
@@ -0,0 +1,86 @@
+/*
+ * Device Tree file for the Conexant Equinox CX92755 EVK
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ *  Copyright (C) 2014 Paradox Innovation Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "cx92755.dtsi"
+
+/ {
+	model = "Conexant Equinox CX92755 EVK";
+	compatible = "cnxt,equinox", "cnxt,cx92755";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	memory@0 {
+		reg = <0 0x8000000>;
+		device_type = "memory";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_default>;
+	pinctrl-names = "default";
+};
+
+&i2c {
+	status = "okay";
+};
+
+&pinctrl {
+	uart0_default: uart0_active {
+		pins = "GP_O0", "GP_O1";
+		function = "client_b";
+	};
+};
diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/compulab-sb-som.dtsi
deleted file mode 100644
index f5e6216718d85..0000000000000
--- a/arch/arm/boot/dts/compulab-sb-som.dtsi
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
- */
-
-/ {
-	model = "CompuLab SB-SOM";
-	compatible = "compulab,sb-som";
-
-	vsb_3v3: fixedregulator-v3_3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vsb_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		enable-active-high;
-	};
-
-	lcd0: display {
-		compatible = "startek,startek-kd050c", "panel-dpi";
-		label = "lcd";
-
-		panel-timing {
-			clock-frequency = <33000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <40>;
-			hback-porch = <40>;
-			hsync-len = <43>;
-			vback-porch = <29>;
-			vfront-porch = <13>;
-			vsync-len = <3>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-	};
-
-	hdmi_conn: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-	};
-};
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi
deleted file mode 100644
index 227675fbe8208..0000000000000
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Device Tree Include file for the Conexant Digicolor CX92755 SoC
- *
- * Author: Baruch Siach <baruch@tkos.co.il>
- *
- *  Copyright (C) 2014 Paradox Innovation Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "cnxt,cx92755";
-
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0x0>;
-		};
-	};
-
-	main_clk: main_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency  = <200000000>;
-	};
-
-	intc: interrupt-controller@f0000040 {
-		compatible = "cnxt,cx92755-ic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xf0000040 0x40>;
-		syscon = <&uc_regs>;
-	};
-
-	timer@f0000fc0 {
-		compatible = "cnxt,cx92755-timer";
-		reg = <0xf0000fc0 0x40>;
-		interrupts = <19>, <31>, <34>, <35>, <52>, <53>, <54>, <55>;
-		clocks = <&main_clk>;
-	};
-
-	rtc@f0000c30 {
-		compatible = "cnxt,cx92755-rtc";
-		reg = <0xf0000c30 0x18>;
-		interrupts = <25>;
-	};
-
-	watchdog@f0000fc0 {
-		compatible = "cnxt,cx92755-wdt";
-		reg = <0xf0000fc0 0x8>;
-		clocks = <&main_clk>;
-		timeout-sec = <15>;
-	};
-
-	pinctrl: pinctrl@f0000e20 {
-		compatible = "cnxt,cx92755-pinctrl";
-		reg = <0xf0000e20 0x100>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	uc_regs: syscon@f00003a0 {
-		compatible = "cnxt,cx92755-uc", "syscon";
-		reg = <0xf00003a0 0x10>;
-	};
-
-	uart0: serial@f0000740 {
-		compatible = "cnxt,cx92755-usart";
-		reg = <0xf0000740 0x20>;
-		clocks = <&main_clk>;
-		interrupts = <44>;
-		status = "disabled";
-	};
-
-	uart1: serial@f0000760 {
-		compatible = "cnxt,cx92755-usart";
-		reg = <0xf0000760 0x20>;
-		clocks = <&main_clk>;
-		interrupts = <45>;
-		status = "disabled";
-	};
-
-	uart2: serial@f0000780 {
-		compatible = "cnxt,cx92755-usart";
-		reg = <0xf0000780 0x20>;
-		clocks = <&main_clk>;
-		interrupts = <46>;
-		status = "disabled";
-	};
-
-	i2c: i2c@f0000120 {
-		compatible = "cnxt,cx92755-i2c";
-		reg = <0xf0000120 0x10>;
-		interrupts = <28>;
-		clocks = <&main_clk>;
-		clock-frequency = <100000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts
deleted file mode 100644
index 026f556c8c503..0000000000000
--- a/arch/arm/boot/dts/cx92755_equinox.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Device Tree file for the Conexant Equinox CX92755 EVK
- *
- * Author: Baruch Siach <baruch@tkos.co.il>
- *
- *  Copyright (C) 2014 Paradox Innovation Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "cx92755.dtsi"
-
-/ {
-	model = "Conexant Equinox CX92755 EVK";
-	compatible = "cnxt,equinox", "cnxt,cx92755";
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-	};
-
-	memory@0 {
-		reg = <0 0x8000000>;
-		device_type = "memory";
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-0 = <&uart0_default>;
-	pinctrl-names = "default";
-};
-
-&i2c {
-	status = "okay";
-};
-
-&pinctrl {
-	uart0_default: uart0_active {
-		pins = "GP_O0", "GP_O1";
-		function = "client_b";
-	};
-};
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
deleted file mode 100644
index d4a5237cee0a8..0000000000000
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Device Tree for AM1808 EnBW CMC board
- *
- * Copyright 2012 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- */
-/dts-v1/;
-#include "da850.dtsi"
-
-/ {
-	compatible = "enbw,cmc", "ti,da850";
-	model = "EnBW CMC";
-
-	soc@1c00000 {
-		serial0: serial@42000 {
-			status = "okay";
-		};
-		serial1: serial@10c000 {
-			status = "okay";
-		};
-		serial2: serial@10d000 {
-			status = "okay";
-		};
-		mdio: mdio@224000 {
-			status = "okay";
-		};
-		eth0: ethernet@220000 {
-			status = "okay";
-		};
-	};
-};
-
-&ref_clk {
-	clock-frequency = <24000000>;
-};
-
-&edma0 {
-	ti,edma-reserved-slot-ranges = <32 50>;
-};
-
-&edma1 {
-	ti,edma-reserved-slot-ranges = <32 90>;
-};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
deleted file mode 100644
index 0ca849885d1fe..0000000000000
--- a/arch/arm/boot/dts/da850-evm.dts
+++ /dev/null
@@ -1,466 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree for DA850 EVM board
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-#include "da850.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "ti,da850-evm", "ti,da850";
-	model = "DA850/AM1808/OMAP-L138 EVM";
-
-	chosen {
-		stdout-path = &serial2;
-	};
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		ethernet0 = &eth0;
-		spi0 = &spi1;
-	};
-
-	backlight: backlight-pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap2_pins>;
-		power-supply = <&backlight_lcd>;
-		compatible = "pwm-backlight";
-		/*
-		 * The PWM here corresponds to production hardware. The
-		 * schematic needs to be 1015171 (15 March 2010), Rev A
-		 * or newer.
-		 */
-		pwms = <&ecap2 0 50000 0>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
-		default-brightness-level = <7>;
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-		/*
-		 * The vpif and the LCD are mutually exclusive.
-		 * To enable VPIF, change the status below to 'disabled' then
-		 * then change the status of the vpif below to 'okay'
-		 */
-		status = "okay";
-		enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
-
-		panel-info {
-			ac-bias = <255>;
-			ac-bias-intrpt = <0>;
-			dma-burst-sz = <16>;
-			bpp = <16>;
-			fdd = <0x80>;
-			sync-edge = <0>;
-			sync-ctrl = <1>;
-			raster-order = <0>;
-			fifo-th = <0>;
-		};
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: 480x272 {
-				clock-frequency = <9000000>;
-				hactive = <480>;
-				vactive = <272>;
-				hfront-porch = <3>;
-				hback-porch = <2>;
-				hsync-len = <42>;
-				vback-porch = <3>;
-				vfront-porch = <4>;
-				vsync-len = <11>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	baseboard_3v3: fixedregulator-3v3 {
-		/* TPS73701DCQ */
-		compatible = "regulator-fixed";
-		regulator-name = "baseboard_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vbat>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	baseboard_1v8: fixedregulator-1v8 {
-		/* TPS73701DCQ */
-		compatible = "regulator-fixed";
-		regulator-name = "baseboard_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vbat>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	backlight_lcd: backlight-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd_backlight_pwr";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "DA850-OMAPL138 EVM";
-		simple-audio-card,widgets =
-			"Line", "Line In",
-			"Line", "Line Out";
-		simple-audio-card,routing =
-			"LINE1L", "Line In",
-			"LINE1R", "Line In",
-			"Line Out", "LLOUT",
-			"Line Out", "RLOUT";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&link0_codec>;
-		simple-audio-card,frame-master = <&link0_codec>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp0>;
-			system-clock-frequency = <24576000>;
-		};
-
-		link0_codec: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			system-clock-frequency = <24576000>;
-		};
-	};
-};
-
-&ecap2 {
-	status = "okay";
-};
-
-&ref_clk {
-	clock-frequency = <24000000>;
-};
-
-&pmx_core {
-	status = "okay";
-
-	mcasp0_pins: pinmux_mcasp0_pins {
-		pinctrl-single,bits = <
-			/*
-			 * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
-			 * AFSR, AMUTE
-			 */
-			0x00 0x11111111 0xffffffff
-			/* AXR11, AXR12 */
-			0x04 0x00011000 0x000ff000
-		>;
-	};
-	nand_pins: nand_pins {
-		pinctrl-single,bits = <
-			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
-			0x1c 0x10110110  0xf0ff0ff0
-			/*
-			 * EMA_D[0], EMA_D[1], EMA_D[2],
-			 * EMA_D[3], EMA_D[4], EMA_D[5],
-			 * EMA_D[6], EMA_D[7]
-			 */
-			0x24 0x11111111  0xffffffff
-			/* EMA_A[1], EMA_A[2] */
-			0x30 0x01100000  0x0ff00000
-		>;
-	};
-};
-
-&cpu {
-	cpu-supply = <&vdcdc3_reg>;
-};
-
-/*
- * The standard da850-evm kits and SOM's are 375MHz so enable this operating
- * point by default. Higher frequencies must be enabled for custom boards with
- * other variants of the SoC.
- */
-&opp_375 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&rtc0 {
-	status = "okay";
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	tps: tps@48 {
-		reg = <0x48>;
-	};
-	tlv320aic3106: tlv320aic3106@18 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x18>;
-		status = "okay";
-
-		/* Regulators */
-		IOVDD-supply = <&vdcdc2_reg>;
-		AVDD-supply = <&baseboard_3v3>;
-		DRVDD-supply = <&baseboard_3v3>;
-		DVDD-supply = <&baseboard_1v8>;
-	};
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-	tca6416_bb: gpio@21 {
-		compatible = "ti,tca6416";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&wdt {
-	status = "okay";
-};
-
-&mmc0 {
-	max-frequency = <50000000>;
-	bus-width = <4>;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio 65 GPIO_ACTIVE_HIGH>;
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <30000000>;
-		m25p,fast-read;
-		reg = <0>;
-		partition@0 {
-			label = "U-Boot-SPL";
-			reg = <0x00000000 0x00010000>;
-			read-only;
-		};
-		partition@1 {
-			label = "U-Boot";
-			reg = <0x00010000 0x00080000>;
-			read-only;
-		};
-		partition@2 {
-			label = "U-Boot-Env";
-			reg = <0x00090000 0x00010000>;
-			read-only;
-		};
-		partition@3 {
-			label = "Kernel";
-			reg = <0x000a0000 0x00280000>;
-		};
-		partition@4 {
-			label = "Filesystem";
-			reg = <0x00320000 0x00400000>;
-		};
-		partition@5 {
-			label = "MAC-Address";
-			reg = <0x007f0000 0x00010000>;
-			read-only;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-	bus_freq = <2200000>;
-};
-
-&eth0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mii_pins>;
-};
-
-&gpio {
-	status = "okay";
-};
-
-/include/ "tps6507x.dtsi"
-
-&tps {
-	vdcdc1_2-supply = <&vbat>;
-	vdcdc3-supply = <&vbat>;
-	vldo1_2-supply = <&vbat>;
-
-	regulators {
-		vdcdc1_reg: regulator@0 {
-			regulator-name = "VDCDC1_3.3V";
-			regulator-min-microvolt = <3150000>;
-			regulator-max-microvolt = <3450000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdcdc2_reg: regulator@1 {
-			regulator-name = "VDCDC2_3.3V";
-			regulator-min-microvolt = <1710000>;
-			regulator-max-microvolt = <3450000>;
-			regulator-always-on;
-			regulator-boot-on;
-			ti,defdcdc_default = <1>;
-		};
-
-		vdcdc3_reg: regulator@2 {
-			regulator-name = "VDCDC3_1.2V";
-			regulator-min-microvolt = <950000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-always-on;
-			regulator-boot-on;
-			ti,defdcdc_default = <1>;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "LDO1_1.8V";
-			regulator-min-microvolt = <1710000>;
-			regulator-max-microvolt = <1890000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "LDO2_1.2V";
-			regulator-min-microvolt = <1140000>;
-			regulator-max-microvolt = <1320000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
-
-&mcasp0 {
-	#sound-dai-cells = <0>;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp0_pins>;
-
-	op-mode = <0>;          /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializer */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		0 0 0 0
-		0 0 0 0
-		0 0 0 1
-		2 0 0 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&edma0 {
-	ti,edma-reserved-slot-ranges = <32 50>;
-};
-
-&edma1 {
-	ti,edma-reserved-slot-ranges = <32 90>;
-};
-
-&aemif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_pins>;
-	status = "okay";
-	cs3 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <3>;
-
-		nand@2000000,0 {
-			compatible = "ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0x02000000 0x02000000
-			       1 0x00000000 0x00008000>;
-
-			ti,davinci-chipselect = <1>;
-			ti,davinci-mask-ale = <0>;
-			ti,davinci-mask-cle = <0>;
-			ti,davinci-mask-chipsel = <0>;
-			ti,davinci-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			ti,davinci-nand-use-bbt;
-		};
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&vpif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
-	/*
-	 * The vpif and the LCD are mutually exclusive.
-	 * To enable VPIF, disable the ti,tilcdc,panel then
-	 * change the status below to 'okay'
-	 */
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
deleted file mode 100644
index e379d6e7ad499..0000000000000
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ /dev/null
@@ -1,425 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2016 BayLibre, Inc.
- */
-/dts-v1/;
-#include "da850.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "DA850/AM1808/OMAP-L138 LCDK";
-	compatible = "ti,da850-lcdk", "ti,da850";
-
-	aliases {
-		serial2 = &serial2;
-		ethernet0 = &eth0;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	memory@c0000000 {
-		/* 128 MB DDR2 SDRAM @ 0xc0000000 */
-		reg = <0xc0000000 0x08000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dsp_memory_region: dsp-memory@c3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0xc3000000 0x1000000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	vcc_5vd: fixedregulator-vcc_5vd {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_5vd";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	vcc_3v3d: fixedregulator-vcc_3v3d {
-		/* TPS650250 - VDCDC1 */
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_3v3d";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_5vd>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_1v8d: fixedregulator-vcc_1v8d {
-		/* TPS650250 - VDCDC2 */
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_1v8d";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_5vd>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "DA850-OMAPL138 LCDK";
-		simple-audio-card,widgets =
-			"Line", "Line In",
-			"Line", "Line Out",
-			"Microphone", "Mic Jack";
-		simple-audio-card,routing =
-			"LINE1L", "Line In",
-			"LINE1R", "Line In",
-			"Line Out", "LLOUT",
-			"Line Out", "RLOUT",
-			"MIC3L", "Mic Jack",
-			"MIC3R", "Mic Jack",
-			"Mic Jack", "Mic Bias";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&link0_codec>;
-		simple-audio-card,frame-master = <&link0_codec>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp0>;
-			system-clock-frequency = <24576000>;
-		};
-
-		link0_codec: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			system-clock-frequency = <24576000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		user1 {
-			label = "GPIO Key USER1";
-			linux,code = <BTN_0>;
-			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
-		};
-
-		user2 {
-			label = "GPIO Key USER2";
-			linux,code = <BTN_1>;
-			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	vga-bridge {
-		compatible = "ti,ths8135";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				vga_bridge_in: endpoint {
-					remote-endpoint = <&lcdc_out_vga>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				vga_bridge_out: endpoint {
-					remote-endpoint = <&vga_con_in>;
-				};
-			};
-		};
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		ddc-i2c-bus = <&i2c0>;
-
-		port {
-			vga_con_in: endpoint {
-				remote-endpoint = <&vga_bridge_out>;
-			};
-		};
-	};
-
-	cvdd: regulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "cvdd";
-		regulator-min-microvolt = <1300000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&ref_clk {
-	clock-frequency = <24000000>;
-};
-
-&cpu {
-	cpu-supply = <&cvdd>;
-};
-
-/*
- * LCDK has a fixed CVDD of 1.3V, so only operating points >= 300MHz are
- * valid. Unfortunately due to a problem with the DA8XX OHCI controller, we
- * can't enable more than one OPP by default, since the controller sometimes
- * becomes unresponsive after a transition. Fix the frequency at 456 MHz.
- */
-
-&opp_100 {
-	status = "disabled";
-};
-
-&opp_200 {
-	status = "disabled";
-};
-
-&opp_300 {
-	status = "disabled";
-};
-
-&opp_456 {
-	status = "okay";
-};
-
-&pmx_core {
-	status = "okay";
-
-	mcasp0_pins: pinmux_mcasp0_pins {
-		pinctrl-single,bits = <
-			/* AHCLKX AFSX ACLKX */
-			0x00 0x00101010 0x00f0f0f0
-			/* ARX13 ARX14 */
-			0x04 0x00000110 0x00000ff0
-		>;
-	};
-
-	nand_pins: nand_pins {
-		pinctrl-single,bits = <
-			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */
-			0x1c 0x10110010  0xf0ff00f0
-			/*
-			 * EMA_D[0], EMA_D[1], EMA_D[2],
-			 * EMA_D[3], EMA_D[4], EMA_D[5],
-			 * EMA_D[6], EMA_D[7]
-			 */
-			0x24 0x11111111  0xffffffff
-			/*
-			 * EMA_D[8],  EMA_D[9],  EMA_D[10],
-			 * EMA_D[11], EMA_D[12], EMA_D[13],
-			 * EMA_D[14], EMA_D[15]
-			 */
-			0x20 0x11111111  0xffffffff
-			/* EMA_A[1], EMA_A[2] */
-			0x30 0x01100000  0x0ff00000
-		>;
-	};
-};
-
-&serial2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&serial2_rxtx_pins>;
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
-
-&rtc0 {
-	status = "okay";
-};
-
-&gpio {
-	status = "okay";
-};
-
-&sata_refclk {
-	status = "okay";
-	clock-frequency = <100000000>;
-};
-
-&sata {
-	status = "okay";
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-	bus_freq = <2200000>;
-	status = "okay";
-};
-
-&eth0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mii_pins>;
-	status = "okay";
-};
-
-&mmc0 {
-	max-frequency = <50000000>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	tlv320aic3106: tlv320aic3106@18 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x18>;
-		adc-settle-ms = <40>;
-		ai3x-micbias-vg = <1>;		/* 2.0V */
-		status = "okay";
-
-		/* Regulators */
-		IOVDD-supply = <&vcc_3v3d>;
-		AVDD-supply = <&vcc_3v3d>;
-		DRVDD-supply = <&vcc_3v3d>;
-		DVDD-supply = <&vcc_1v8d>;
-	};
-};
-
-&mcasp0 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp0_pins>;
-	status = "okay";
-
-	op-mode = <0>;   /* DAVINCI_MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <   /* 0: INACTIVE, 1: TX, 2: RX */
-		0 0 0 0
-		0 0 0 0
-		0 0 0 0
-		0 1 2 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&aemif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_pins>;
-	status = "okay";
-	cs3 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <3>;
-
-		nand@2000000,0 {
-			compatible = "ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0x02000000 0x02000000
-			       1 0x00000000 0x00008000>;
-
-			ti,davinci-chipselect = <1>;
-			ti,davinci-mask-ale = <0>;
-			ti,davinci-mask-cle = <0>;
-			ti,davinci-mask-chipsel = <0>;
-
-			ti,davinci-nand-buswidth = <16>;
-			ti,davinci-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			ti,davinci-nand-use-bbt;
-
-			/*
-			 * The OMAP-L132/L138 Bootloader doc SPRAB41E reads:
-			 * "To boot from NAND Flash, the AIS should be written
-			 * to NAND block 1 (NAND block 0 is not used by default)".
-			 * The same doc mentions that for ROM "Silicon Revision 2.1",
-			 * "Updated NAND boot mode to offer boot from block 0 or block 1".
-			 * However the limitaion is left here by default for compatibility
-			 * with older silicon and because it needs new boot pin settings
-			 * not possible in stock LCDK.
-			 */
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "u-boot env";
-					reg = <0 0x020000>;
-				};
-				partition@20000 {
-					/* The LCDK defaults to booting from this partition */
-					label = "u-boot";
-					reg = <0x020000 0x080000>;
-				};
-				partition@a0000 {
-					label = "free space";
-					reg = <0x0a0000 0>;
-				};
-			};
-		};
-	};
-};
-
-&prictrl {
-	status = "okay";
-};
-
-&memctrl {
-	status = "okay";
-};
-
-&lcdc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_pins>;
-
-	port {
-		lcdc_out_vga: endpoint {
-			remote-endpoint = <&vga_bridge_in>;
-		};
-	};
-};
-
-&vpif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&vpif_capture_pins>;
-	status = "okay";
-};
-
-&dsp {
-	memory-region = <&dsp_memory_region>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
deleted file mode 100644
index afd04a423856d..0000000000000
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ /dev/null
@@ -1,466 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device tree for LEGO MINDSTORMS EV3
- *
- * Copyright (C) 2017 David Lechner <david@lechnology.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-
-#include "da850.dtsi"
-
-/ {
-	compatible = "lego,ev3", "ti,da850";
-	model = "LEGO MINDSTORMS EV3";
-
-	aliases {
-		serial1 = &serial1;
-	};
-
-	memory@c0000000 {
-		device_type = "memory";
-		reg = <0xc0000000 0x04000000>;
-	};
-
-	/*
-	 * The buttons on the EV3 are mapped to keyboard keys.
-	 */
-	gpio_keys {
-		compatible = "gpio-keys";
-		label = "EV3 Brick Buttons";
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_bias>;
-
-		center {
-			label = "Center";
-			linux,code = <KEY_ENTER>;
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		left {
-			label = "Left";
-			linux,code = <KEY_LEFT>;
-			gpios = <&gpio 102 GPIO_ACTIVE_HIGH>;
-		};
-
-		back {
-			label = "Back";
-			linux,code = <KEY_BACKSPACE>;
-			gpios = <&gpio 106 GPIO_ACTIVE_HIGH>;
-		};
-
-		right {
-			label = "Right";
-			linux,code = <KEY_RIGHT>;
-			gpios = <&gpio 124 GPIO_ACTIVE_HIGH>;
-		};
-
-		down {
-			label = "Down";
-			linux,code = <KEY_DOWN>;
-			gpios = <&gpio 126 GPIO_ACTIVE_HIGH>;
-		};
-
-		up {
-			label = "Up";
-			linux,code = <KEY_UP>;
-			gpios = <&gpio 127 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	/*
-	 * The EV3 has two built-in bi-color LEDs behind the buttons.
-	 */
-	leds {
-		compatible = "gpio-leds";
-
-		left_green {
-			label = "led0:green:brick-status";
-			/* GP6[13] */
-			gpios = <&gpio 103 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		right_red {
-			label = "led1:red:brick-status";
-			/* GP6[7] */
-			gpios = <&gpio 108 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		left_red {
-			label = "led0:red:brick-status";
-			/* GP6[12] */
-			gpios = <&gpio 109 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		right_green {
-			label = "led1:green:brick-status";
-			/* GP6[14] */
-			gpios = <&gpio 110 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	/*
-	 * The EV3 is powered down by turning off the main 5V supply.
-	 */
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio 107 GPIO_ACTIVE_LOW>;
-	};
-
-	sound {
-		compatible = "pwm-beeper";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ehrpwm0b_pins>;
-		pwms = <&ehrpwm0 1 1000000 0>;
-		amp-supply = <&amp>;
-	};
-
-	cvdd: regulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "cvdd";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/*
-	 * This is a 5V current limiting regulator that is shared by USB,
-	 * the sensor (input) ports, the motor (output) ports and the A/DC.
-	 */
-	vcc5v: regulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio 101 0>;
-		over-current-gpios = <&gpio 99 GPIO_ACTIVE_LOW>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	/*
-	 * This is a simple voltage divider on VCC5V to provide a 2.5V
-	 * reference signal to the ADC.
-	 */
-	adc_ref: regulator2 {
-		compatible = "regulator-fixed";
-		regulator-name = "adc ref";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-boot-on;
-		vin-supply = <&vcc5v>;
-	};
-
-	/*
-	 * This is the amplifier for the speaker.
-	 */
-	amp: regulator3 {
-		compatible = "regulator-fixed";
-		regulator-name = "amp";
-		gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	/*
-	 * The EV3 can use 6-AA batteries or a rechargeable Li-ion battery pack.
-	 */
-	battery {
-		compatible = "lego,ev3-battery";
-		io-channels = <&adc 4>, <&adc 3>;
-		io-channel-names = "voltage", "current";
-		rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
-	};
-
-	bt_slow_clk: bt-clock {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap2_pins>, <&bt_clock_bias>;
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		pwms = <&ecap2 0 30518 0>;
-	};
-
-	/* ARM local RAM */
-	memory@ffff0000 {
-		compatible = "syscon", "simple-mfd";
-		reg = <0xffff0000 0x2000>; /* 8k */
-
-		/*
-		 * The I2C bootloader looks for this magic value to either
-		 * boot normally or boot into a firmware update mode.
-		 */
-		reboot-mode {
-			compatible = "syscon-reboot-mode";
-			offset = <0x1ffc>;
-			mode-normal = <0x00000000>;
-			mode-loader = <0x5555aaaa>;
-		};
-	};
-};
-
-&ref_clk {
-	clock-frequency = <24000000>;
-};
-
-&cpu {
-	cpu-supply = <&cvdd>;
-};
-
-/* since we have a fixed regulator, we can't run at these points */
-&opp_100 {
-	status = "disabled";
-};
-
-&opp_200 {
-	status = "disabled";
-};
-
-/*
- * The SoC is actually the 456MHz version, but because of the fixed regulator
- * This is the fastest we can go.
- */
-&opp_375 {
-	status = "okay";
-};
-
-&pmx_core {
-	status = "okay";
-
-	ev3_lcd_pins: pinmux_lcd {
-		pinctrl-single,bits = <
-			/* SIMO, CLK */
-			0x14 0x00100100 0x00f00f00
-		>;
-	};
-};
-
-&pinconf {
-	status = "okay";
-
-	/* Buttons have external pulldown resistors */
-	button_bias: button-bias-groups {
-		disable {
-			groups = "cp5", "cp24", "cp25", "cp28";
-			bias-disable;
-		};
-	};
-
-	bt_clock_bias: bt-clock-bias-groups {
-		disable {
-			groups = "cp2";
-			bias-disable;
-		};
-	};
-
-	bt_pic_bias: bt-pic-bias-groups {
-		disable {
-			groups = "cp20";
-			bias-disable;
-		};
-	};
-};
-
-/* Input port 1 */
-&serial1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&serial1_rxtx_pins>;
-};
-
-&serial2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&serial2_rxtx_pins>, <&serial2_rtscts_pins>, <&bt_pic_bias>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "ti,cc2560";
-		clocks = <&bt_slow_clk>;
-		clock-names = "ext_clock";
-		enable-gpios = <&gpio 73 GPIO_ACTIVE_HIGH>;
-		max-speed = <2000000>;
-		nvmem-cells = <&bdaddr>;
-		nvmem-cell-names = "bd-address";
-	};
-};
-
-&rtc0 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	/*
-	 * EEPROM contains the first stage bootloader, HW ID and Bluetooth MAC.
-	 */
-	eeprom@50 {
-		compatible = "microchip,24c128", "atmel,24c128";
-		pagesize = <64>;
-		read-only;
-		reg = <0x50>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		bdaddr: bdaddr@3f06 {
-			reg = <0x3f06 0x06>;
-		};
-	};
-};
-
-&wdt {
-	status = "okay";
-};
-
-&mmc0 {
-	status = "okay";
-	max-frequency = <50000000>;
-	bus-width = <4>;
-	cd-gpios = <&gpio 94 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>, <&spi0_cs3_pin>;
-
-	flash@0 {
-		compatible = "n25q128a13", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		ti,spi-wdelay = <8>;
-
-		/* Partitions are based on the official firmware from LEGO */
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x40000>;
-			};
-
-			partition@40000 {
-				label = "U-Boot Env";
-				reg = <0x40000 0x10000>;
-			};
-
-			partition@50000 {
-				label = "Kernel";
-				reg = <0x50000 0x200000>;
-			};
-
-			partition@250000 {
-				label = "Filesystem";
-				reg = <0x250000 0xa50000>;
-			};
-
-			partition@cb0000 {
-				label = "Storage";
-				reg = <0xcb0000 0x2f0000>;
-			};
-		};
-	};
-
-	adc: adc@3 {
-		compatible = "ti,ads7957";
-		reg = <3>;
-		#io-channel-cells = <1>;
-		spi-max-frequency = <1000000>;
-		ti,spi-wdelay = <63>;
-		vref-supply = <&adc_ref>;
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-0 = <&ev3_lcd_pins>;
-	pinctrl-names = "default";
-	cs-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-
-	display@0{
-		compatible = "lego,ev3-lcd";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-		a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&ecap2 {
-	status = "okay";
-};
-
-&ehrpwm0 {
-	status = "okay";
-};
-
-&gpio {
-	status = "okay";
-
-	/* Don't pull down battery voltage adc io channel */
-	batt_volt_en {
-		gpio-hog;
-		gpios = <6 GPIO_ACTIVE_HIGH>;
-		output-high;
-	};
-
-	/* Don't impede Bluetooth clock signal */
-	bt_clock_en {
-		gpio-hog;
-		gpios = <5 GPIO_ACTIVE_HIGH>;
-		input;
-	};
-
-	/*
-	 * There is a PIC microcontroller for interfacing with an Apple MFi
-	 * chip. This interferes with normal Bluetooth operation, so we need
-	 * to make sure it is turned off. Note: The publicly available
-	 * schematics from LEGO don't show that these pins are connected to
-	 * anything, but they are present in the source code from LEGO.
-	 */
-
-	bt_pic_en {
-		gpio-hog;
-		gpios = <51 GPIO_ACTIVE_HIGH>;
-		output-low;
-	};
-
-	bt_pic_rst {
-		gpio-hog;
-		gpios = <78 GPIO_ACTIVE_HIGH>;
-		output-high;
-	};
-
-	bt_pic_cts {
-		gpio-hog;
-		gpios = <87 GPIO_ACTIVE_HIGH>;
-		input;
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	vbus-supply = <&vcc5v>;
-};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
deleted file mode 100644
index e46e4d22db394..0000000000000
--- a/arch/arm/boot/dts/da850.dtsi
+++ /dev/null
@@ -1,964 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- */
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-	aliases { };
-
-	memory@c0000000 {
-		device_type = "memory";
-		reg = <0xc0000000 0x0>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu: cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-			clocks = <&psc0 14>;
-			operating-points-v2 = <&opp_table>;
-		};
-	};
-
-	opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp_100: opp100-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <1000000 950000 1050000>;
-		};
-
-		opp_200: opp110-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <1100000 1050000 1160000>;
-		};
-
-		opp_300: opp120-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <1200000 1140000 1320000>;
-		};
-
-		/*
-		 * Original silicon was 300MHz max, so higher frequencies
-		 * need to be enabled on a per-board basis if the chip is
-		 * capable.
-		 */
-
-		opp_375: opp120-375000000 {
-			status = "disabled";
-			opp-hz = /bits/ 64 <375000000>;
-			opp-microvolt = <1200000 1140000 1320000>;
-		};
-
-		opp_456: opp130-456000000 {
-			status = "disabled";
-			opp-hz = /bits/ 64 <456000000>;
-			opp-microvolt = <1300000 1250000 1350000>;
-		};
-	};
-
-	arm {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		intc: interrupt-controller@fffee000 {
-			compatible = "ti,cp-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			ti,intc-size = <101>;
-			reg = <0xfffee000 0x2000>;
-		};
-	};
-	clocks: clocks {
-		ref_clk: ref_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-output-names = "ref_clk";
-		};
-		sata_refclk: sata_refclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-output-names = "sata_refclk";
-			status = "disabled";
-		};
-		usb_refclkin: usb_refclkin {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-output-names = "usb_refclkin";
-			status = "disabled";
-		};
-	};
-	dsp: dsp@11800000 {
-		compatible = "ti,da850-dsp";
-		reg = <0x11800000 0x40000>,
-		      <0x11e00000 0x8000>,
-		      <0x11f00000 0x8000>,
-		      <0x01c14044 0x4>,
-		      <0x01c14174 0x8>;
-		reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
-		interrupt-parent = <&intc>;
-		interrupts = <28>;
-		clocks = <&psc0 15>;
-		resets = <&psc0 15>;
-		status = "disabled";
-	};
-	soc@1c00000 {
-		compatible = "simple-bus";
-		model = "da850";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x01c00000 0x400000>;
-		interrupt-parent = <&intc>;
-
-		psc0: clock-controller@10000 {
-			compatible = "ti,da850-psc0";
-			reg = <0x10000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
-				 <&pll0_sysclk 4>, <&pll0_sysclk 6>,
-				 <&async1_clk>;
-			clock-names = "pll0_sysclk1", "pll0_sysclk2",
-				      "pll0_sysclk4", "pll0_sysclk6",
-				      "async1";
-		};
-		pll0: clock-controller@11000 {
-			compatible = "ti,da850-pll0";
-			reg = <0x11000 0x1000>;
-			clocks = <&ref_clk>, <&pll1_sysclk 3>;
-			clock-names = "clksrc", "extclksrc";
-
-			pll0_pllout: pllout {
-				#clock-cells = <0>;
-			};
-			pll0_sysclk: sysclk {
-				#clock-cells = <1>;
-			};
-			pll0_auxclk: auxclk {
-				#clock-cells = <0>;
-			};
-			pll0_obsclk: obsclk {
-				#clock-cells = <0>;
-			};
-		};
-		pmx_core: pinmux@14120 {
-			compatible = "pinctrl-single";
-			reg = <0x14120 0x50>;
-			#pinctrl-cells = <2>;
-			pinctrl-single,bit-per-mux;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0xf>;
-			/* pin base, nr pins & gpio function */
-			pinctrl-single,gpio-range = <&range   0 17 0x8>,
-						    <&range  17  8 0x4>,
-						    <&range  26  8 0x4>,
-						    <&range  34 80 0x8>,
-						    <&range 129 31 0x8>;
-			status = "disabled";
-
-			range: gpio-range {
-				#pinctrl-single,gpio-range-cells = <3>;
-			};
-
-			serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
-				pinctrl-single,bits = <
-					/* UART0_RTS UART0_CTS */
-					0x0c 0x22000000 0xff000000
-				>;
-			};
-			serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
-				pinctrl-single,bits = <
-					/* UART0_TXD UART0_RXD */
-					0x0c 0x00220000 0x00ff0000
-				>;
-			};
-			serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
-				pinctrl-single,bits = <
-					/* UART1_CTS UART1_RTS */
-					0x00 0x00440000 0x00ff0000
-				>;
-			};
-			serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
-				pinctrl-single,bits = <
-					/* UART1_TXD UART1_RXD */
-					0x10 0x22000000 0xff000000
-				>;
-			};
-			serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
-				pinctrl-single,bits = <
-					/* UART2_CTS UART2_RTS */
-					0x00 0x44000000 0xff000000
-				>;
-			};
-			serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
-				pinctrl-single,bits = <
-					/* UART2_TXD UART2_RXD */
-					0x10 0x00220000 0x00ff0000
-				>;
-			};
-			i2c0_pins: pinmux_i2c0_pins {
-				pinctrl-single,bits = <
-					/* I2C0_SDA,I2C0_SCL */
-					0x10 0x00002200 0x0000ff00
-				>;
-			};
-			i2c1_pins: pinmux_i2c1_pins {
-				pinctrl-single,bits = <
-					/* I2C1_SDA, I2C1_SCL */
-					0x10 0x00440000 0x00ff0000
-				>;
-			};
-			mmc0_pins: pinmux_mmc_pins {
-				pinctrl-single,bits = <
-					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
-					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
-					 * MMCSD0_CMD    MMCSD0_CLK
-					 */
-					0x28 0x00222222  0x00ffffff
-				>;
-			};
-			ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
-				pinctrl-single,bits = <
-					/* EPWM0A */
-					0xc 0x00000002 0x0000000f
-				>;
-			};
-			ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
-				pinctrl-single,bits = <
-					/* EPWM0B */
-					0xc 0x00000020 0x000000f0
-				>;
-			};
-			ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
-				pinctrl-single,bits = <
-					/* EPWM1A */
-					0x14 0x00000002 0x0000000f
-				>;
-			};
-			ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
-				pinctrl-single,bits = <
-					/* EPWM1B */
-					0x14 0x00000020 0x000000f0
-				>;
-			};
-			ecap0_pins: pinmux_ecap0_pins {
-				pinctrl-single,bits = <
-					/* ECAP0_APWM0 */
-					0x8 0x20000000 0xf0000000
-				>;
-			};
-			ecap1_pins: pinmux_ecap1_pins {
-				pinctrl-single,bits = <
-					/* ECAP1_APWM1 */
-					0x4 0x40000000 0xf0000000
-				>;
-			};
-			ecap2_pins: pinmux_ecap2_pins {
-				pinctrl-single,bits = <
-					/* ECAP2_APWM2 */
-					0x4 0x00000004 0x0000000f
-				>;
-			};
-			spi0_pins: pinmux_spi0_pins {
-				pinctrl-single,bits = <
-					/* SIMO, SOMI, CLK */
-					0xc 0x00001101 0x0000ff0f
-				>;
-			};
-			spi0_cs0_pin: pinmux_spi0_cs0 {
-				pinctrl-single,bits = <
-					/* CS0 */
-					0x10 0x00000010 0x000000f0
-				>;
-			};
-			spi0_cs3_pin: pinmux_spi0_cs3_pin {
-				pinctrl-single,bits = <
-					/* CS3 */
-					0xc 0x01000000 0x0f000000
-				>;
-			};
-			spi1_pins: pinmux_spi1_pins {
-				pinctrl-single,bits = <
-					/* SIMO, SOMI, CLK */
-					0x14 0x00110100 0x00ff0f00
-				>;
-			};
-			spi1_cs0_pin: pinmux_spi1_cs0 {
-				pinctrl-single,bits = <
-					/* CS0 */
-					0x14 0x00000010 0x000000f0
-				>;
-			};
-			mdio_pins: pinmux_mdio_pins {
-				pinctrl-single,bits = <
-					/* MDIO_CLK, MDIO_D */
-					0x10 0x00000088 0x000000ff
-				>;
-			};
-			mii_pins: pinmux_mii_pins {
-				pinctrl-single,bits = <
-					/*
-					 * MII_TXEN, MII_TXCLK, MII_COL
-					 * MII_TXD_3, MII_TXD_2, MII_TXD_1
-					 * MII_TXD_0
-					 */
-					0x8 0x88888880 0xfffffff0
-					/*
-					 * MII_RXER, MII_CRS, MII_RXCLK
-					 * MII_RXDV, MII_RXD_3, MII_RXD_2
-					 * MII_RXD_1, MII_RXD_0
-					 */
-					0xc 0x88888888 0xffffffff
-				>;
-			};
-			lcd_pins: pinmux_lcd_pins {
-				pinctrl-single,bits = <
-					/*
-					 * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5],
-					 * LCD_D[6], LCD_D[7]
-					 */
-					0x40 0x22222200 0xffffff00
-					/*
-					 * LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13],
-					 * LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1]
-					 */
-					0x44 0x22222222 0xffffffff
-					/* LCD_D[8], LCD_D[9] */
-					0x48 0x00000022 0x000000ff
-
-					/* LCD_PCLK */
-					0x48 0x02000000 0x0f000000
-					/* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */
-					0x4c 0x02000022 0x0f0000ff
-				>;
-			};
-			vpif_capture_pins: vpif_capture_pins {
-				pinctrl-single,bits = <
-					/* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */
-					0x38 0x11111111 0xffffffff
-					/* VP_DIN[10..15,0..1] */
-					0x3c 0x11111111 0xffffffff
-					/* VP_DIN[8..9] */
-					0x40 0x00000011 0x000000ff
-				>;
-			};
-			vpif_display_pins: vpif_display_pins {
-				pinctrl-single,bits = <
-					/* VP_DOUT[2..7] */
-					0x40 0x11111100 0xffffff00
-					/* VP_DOUT[10..15,0..1] */
-					0x44 0x11111111 0xffffffff
-					/*  VP_DOUT[8..9] */
-					0x48 0x00000011 0x000000ff
-					/*
-					 * VP_CLKOUT3, VP_CLKIN3,
-					 * VP_CLKOUT2, VP_CLKIN2
-					 */
-					0x4c 0x00111100 0x00ffff00
-				>;
-			};
-		};
-		prictrl: priority-controller@14110 {
-			compatible = "ti,da850-mstpri";
-			reg = <0x14110 0x0c>;
-			status = "disabled";
-		};
-		cfgchip: chip-controller@1417c {
-			compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
-			reg = <0x1417c 0x14>;
-
-			usb_phy: usb-phy {
-				compatible = "ti,da830-usb-phy";
-				#phy-cells = <1>;
-				clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
-				clock-names = "usb0_clk48", "usb1_clk48";
-				status = "disabled";
-			};
-			usb_phy_clk: usb-phy-clocks {
-				compatible = "ti,da830-usb-phy-clocks";
-				#clock-cells = <1>;
-				clocks = <&psc1 1>, <&usb_refclkin>,
-					 <&pll0_auxclk>;
-				clock-names = "fck", "usb_refclkin", "auxclk";
-			};
-			ehrpwm_tbclk: ehrpwm_tbclk {
-				compatible = "ti,da830-tbclksync";
-				#clock-cells = <0>;
-				clocks = <&psc1 17>;
-				clock-names = "fck";
-			};
-			div4p5_clk: div4.5 {
-				compatible = "ti,da830-div4p5ena";
-				#clock-cells = <0>;
-				clocks = <&pll0_pllout>;
-				clock-names = "pll0_pllout";
-			};
-			async1_clk: async1 {
-				compatible = "ti,da850-async1-clksrc";
-				#clock-cells = <0>;
-				clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
-				clock-names = "pll0_sysclk3", "div4.5";
-			};
-			async3_clk: async3 {
-				compatible = "ti,da850-async3-clksrc";
-				#clock-cells = <0>;
-				clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
-				clock-names = "pll0_sysclk2", "pll1_sysclk2";
-			};
-		};
-		edma0: edma@0 {
-			compatible = "ti,edma3-tpcc";
-			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
-			reg = <0x0 0x8000>;
-			reg-names = "edma3_cc";
-			interrupts = <11 12>;
-			interrupt-names = "edma3_ccint", "edma3_ccerrint";
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
-			power-domains = <&psc0 0>;
-		};
-		edma0_tptc0: tptc@8000 {
-			compatible = "ti,edma3-tptc";
-			reg = <0x8000 0x400>;
-			interrupts = <13>;
-			interrupt-names = "edm3_tcerrint";
-			power-domains = <&psc0 1>;
-		};
-		edma0_tptc1: tptc@8400 {
-			compatible = "ti,edma3-tptc";
-			reg = <0x8400 0x400>;
-			interrupts = <32>;
-			interrupt-names = "edm3_tcerrint";
-			power-domains = <&psc0 2>;
-		};
-		edma1: edma@230000 {
-			compatible = "ti,edma3-tpcc";
-			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
-			reg = <0x230000 0x8000>;
-			reg-names = "edma3_cc";
-			interrupts = <93 94>;
-			interrupt-names = "edma3_ccint", "edma3_ccerrint";
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma1_tptc0 7>;
-			power-domains = <&psc1 0>;
-		};
-		edma1_tptc0: tptc@238000 {
-			compatible = "ti,edma3-tptc";
-			reg = <0x238000 0x400>;
-			interrupts = <95>;
-			interrupt-names = "edm3_tcerrint";
-			power-domains = <&psc1 21>;
-		};
-		serial0: serial@42000 {
-			compatible = "ti,da830-uart", "ns16550a";
-			reg = <0x42000 0x100>;
-			reg-io-width = <4>;
-			reg-shift = <2>;
-			interrupts = <25>;
-			clocks = <&psc0 9>;
-			power-domains = <&psc0 9>;
-			status = "disabled";
-		};
-		serial1: serial@10c000 {
-			compatible = "ti,da830-uart", "ns16550a";
-			reg = <0x10c000 0x100>;
-			reg-io-width = <4>;
-			reg-shift = <2>;
-			interrupts = <53>;
-			clocks = <&psc1 12>;
-			power-domains = <&psc1 12>;
-			status = "disabled";
-		};
-		serial2: serial@10d000 {
-			compatible = "ti,da830-uart", "ns16550a";
-			reg = <0x10d000 0x100>;
-			reg-io-width = <4>;
-			reg-shift = <2>;
-			interrupts = <61>;
-			clocks = <&psc1 13>;
-			power-domains = <&psc1 13>;
-			status = "disabled";
-		};
-		rtc0: rtc@23000 {
-			compatible = "ti,da830-rtc";
-			reg = <0x23000 0x1000>;
-			interrupts = <19
-				      19>;
-			clocks = <&pll0_auxclk>;
-			clock-names = "int-clk";
-			status = "disabled";
-		};
-		i2c0: i2c@22000 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x22000 0x1000>;
-			interrupts = <15>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&pll0_auxclk>;
-			status = "disabled";
-		};
-		i2c1: i2c@228000 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x228000 0x1000>;
-			interrupts = <51>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&psc1 11>;
-			power-domains = <&psc1 11>;
-			status = "disabled";
-		};
-		clocksource: timer@20000 {
-			compatible = "ti,da830-timer";
-			reg = <0x20000 0x1000>;
-			interrupts = <21>, <22>;
-			interrupt-names = "tint12", "tint34";
-			clocks = <&pll0_auxclk>;
-		};
-		wdt: wdt@21000 {
-			compatible = "ti,davinci-wdt";
-			reg = <0x21000 0x1000>;
-			clocks = <&pll0_auxclk>;
-			status = "disabled";
-		};
-		mmc0: mmc@40000 {
-			compatible = "ti,da830-mmc";
-			reg = <0x40000 0x1000>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			interrupts = <16>;
-			dmas = <&edma0 16 0>, <&edma0 17 0>;
-			dma-names = "rx", "tx";
-			clocks = <&psc0 5>;
-			status = "disabled";
-		};
-		vpif: video@217000 {
-			compatible = "ti,da850-vpif";
-			reg = <0x217000 0x1000>;
-			interrupts = <92>;
-			power-domains = <&psc1 9>;
-			status = "disabled";
-
-			/* VPIF capture port */
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			/* VPIF display port */
-			port@1 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-		mmc1: mmc@21b000 {
-			compatible = "ti,da830-mmc";
-			reg = <0x21b000 0x1000>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			interrupts = <72>;
-			dmas = <&edma1 28 0>, <&edma1 29 0>;
-			dma-names = "rx", "tx";
-			clocks = <&psc1 18>;
-			status = "disabled";
-		};
-		ehrpwm0: pwm@300000 {
-			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm";
-			#pwm-cells = <3>;
-			reg = <0x300000 0x2000>;
-			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
-			clock-names = "fck", "tbclk";
-			power-domains = <&psc1 17>;
-			status = "disabled";
-		};
-		ehrpwm1: pwm@302000 {
-			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm";
-			#pwm-cells = <3>;
-			reg = <0x302000 0x2000>;
-			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
-			clock-names = "fck", "tbclk";
-			power-domains = <&psc1 17>;
-			status = "disabled";
-		};
-		ecap0: pwm@306000 {
-			compatible = "ti,da850-ecap", "ti,am3352-ecap";
-			#pwm-cells = <3>;
-			reg = <0x306000 0x80>;
-			clocks = <&psc1 20>;
-			clock-names = "fck";
-			power-domains = <&psc1 20>;
-			status = "disabled";
-		};
-		ecap1: pwm@307000 {
-			compatible = "ti,da850-ecap", "ti,am3352-ecap";
-			#pwm-cells = <3>;
-			reg = <0x307000 0x80>;
-			clocks = <&psc1 20>;
-			clock-names = "fck";
-			power-domains = <&psc1 20>;
-			status = "disabled";
-		};
-		ecap2: pwm@308000 {
-			compatible = "ti,da850-ecap", "ti,am3352-ecap";
-			#pwm-cells = <3>;
-			reg = <0x308000 0x80>;
-			clocks = <&psc1 20>;
-			clock-names = "fck";
-			power-domains = <&psc1 20>;
-			status = "disabled";
-		};
-		spi0: spi@41000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "ti,da830-spi";
-			reg = <0x41000 0x1000>;
-			num-cs = <6>;
-			ti,davinci-spi-intr-line = <1>;
-			interrupts = <20>;
-			dmas = <&edma0 14 0>, <&edma0 15 0>;
-			dma-names = "rx", "tx";
-			clocks = <&psc0 4>;
-			power-domains = <&psc0 4>;
-			status = "disabled";
-		};
-		spi1: spi@30e000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "ti,da830-spi";
-			reg = <0x30e000 0x1000>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <1>;
-			interrupts = <56>;
-			dmas = <&edma0 18 0>, <&edma0 19 0>;
-			dma-names = "rx", "tx";
-			clocks = <&psc1 10>;
-			power-domains = <&psc1 10>;
-			status = "disabled";
-		};
-		usb0: usb@200000 {
-			compatible = "ti,da830-musb";
-			reg = <0x200000 0x1000>;
-			ranges;
-			interrupts = <58>;
-			interrupt-names = "mc";
-			dr_mode = "otg";
-			phys = <&usb_phy 0>;
-			phy-names = "usb-phy";
-			clocks = <&psc1 1>;
-			clock-ranges;
-			status = "disabled";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			dmas = <&cppi41dma 0 0 &cppi41dma 1 0
-				&cppi41dma 2 0 &cppi41dma 3 0
-				&cppi41dma 0 1 &cppi41dma 1 1
-				&cppi41dma 2 1 &cppi41dma 3 1>;
-			dma-names =
-				"rx1", "rx2", "rx3", "rx4",
-				"tx1", "tx2", "tx3", "tx4";
-
-			cppi41dma: dma-controller@201000 {
-				compatible = "ti,da830-cppi41";
-				reg = <0x201000 0x1000
-					0x202000 0x1000
-					0x204000 0x4000>;
-				reg-names = "controller",
-					    "scheduler", "queuemgr";
-				interrupts = <58>;
-				#dma-cells = <2>;
-				/* For backwards compatibility: */
-				#dma-channels = <4>;
-				dma-channels = <4>;
-				power-domains = <&psc1 1>;
-				status = "okay";
-			};
-		};
-		sata: sata@218000 {
-			compatible = "ti,da850-ahci";
-			reg = <0x218000 0x2000>, <0x22c018 0x4>;
-			interrupts = <67>;
-			clocks = <&psc1 8>, <&sata_refclk>;
-			clock-names = "fck", "refclk";
-			status = "disabled";
-		};
-		pll1: clock-controller@21a000 {
-			compatible = "ti,da850-pll1";
-			reg = <0x21a000 0x1000>;
-			clocks = <&ref_clk>;
-			clock-names = "clksrc";
-
-			pll1_sysclk: sysclk {
-				#clock-cells = <1>;
-			};
-			pll1_obsclk: obsclk {
-				#clock-cells = <0>;
-			};
-		};
-		mdio: mdio@224000 {
-			compatible = "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x224000 0x1000>;
-			clocks = <&psc1 5>;
-			clock-names = "fck";
-			power-domains = <&psc1 5>;
-			status = "disabled";
-		};
-		eth0: ethernet@220000 {
-			compatible = "ti,davinci-dm6467-emac";
-			reg = <0x220000 0x4000>;
-			ti,davinci-ctrl-reg-offset = <0x3000>;
-			ti,davinci-ctrl-mod-reg-offset = <0x2000>;
-			ti,davinci-ctrl-ram-offset = <0>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <33
-					34
-					35
-					36
-					>;
-			clocks = <&psc1 5>;
-			power-domains = <&psc1 5>;
-			status = "disabled";
-		};
-		usb1: usb@225000 {
-			compatible = "ti,da830-ohci";
-			reg = <0x225000 0x1000>;
-			interrupts = <59>;
-			phys = <&usb_phy 1>;
-			phy-names = "usb-phy";
-			clocks = <&psc1 2>;
-			status = "disabled";
-		};
-		gpio: gpio@226000 {
-			compatible = "ti,dm6441-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0x226000 0x1000>;
-			interrupts = <42 43 44 45 46 47 48 49 50>;
-			ti,ngpio = <144>;
-			ti,davinci-gpio-unbanked = <0>;
-			clocks = <&psc1 3>;
-			clock-names = "gpio";
-			status = "disabled";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-ranges = <&pmx_core   0  15 1>,
-				      <&pmx_core   1  14 1>,
-				      <&pmx_core   2  13 1>,
-				      <&pmx_core   3  12 1>,
-				      <&pmx_core   4  11 1>,
-				      <&pmx_core   5  10 1>,
-				      <&pmx_core   6   9 1>,
-				      <&pmx_core   7   8 1>,
-				      <&pmx_core   8   7 1>,
-				      <&pmx_core   9   6 1>,
-				      <&pmx_core  10   5 1>,
-				      <&pmx_core  11   4 1>,
-				      <&pmx_core  12   3 1>,
-				      <&pmx_core  13   2 1>,
-				      <&pmx_core  14   1 1>,
-				      <&pmx_core  15   0 1>,
-				      <&pmx_core  16  39 1>,
-				      <&pmx_core  17  38 1>,
-				      <&pmx_core  18  37 1>,
-				      <&pmx_core  19  36 1>,
-				      <&pmx_core  20  35 1>,
-				      <&pmx_core  21  34 1>,
-				      <&pmx_core  22  33 1>,
-				      <&pmx_core  23  32 1>,
-				      <&pmx_core  24  24 1>,
-				      <&pmx_core  25  22 1>,
-				      <&pmx_core  26  21 1>,
-				      <&pmx_core  27  20 1>,
-				      <&pmx_core  28  19 1>,
-				      <&pmx_core  29  18 1>,
-				      <&pmx_core  30  17 1>,
-				      <&pmx_core  31  16 1>,
-				      <&pmx_core  32  55 1>,
-				      <&pmx_core  33  54 1>,
-				      <&pmx_core  34  53 1>,
-				      <&pmx_core  35  52 1>,
-				      <&pmx_core  36  51 1>,
-				      <&pmx_core  37  50 1>,
-				      <&pmx_core  38  49 1>,
-				      <&pmx_core  39  48 1>,
-				      <&pmx_core  40  47 1>,
-				      <&pmx_core  41  46 1>,
-				      <&pmx_core  42  45 1>,
-				      <&pmx_core  43  44 1>,
-				      <&pmx_core  44  43 1>,
-				      <&pmx_core  45  42 1>,
-				      <&pmx_core  46  41 1>,
-				      <&pmx_core  47  40 1>,
-				      <&pmx_core  48  71 1>,
-				      <&pmx_core  49  70 1>,
-				      <&pmx_core  50  69 1>,
-				      <&pmx_core  51  68 1>,
-				      <&pmx_core  52  67 1>,
-				      <&pmx_core  53  66 1>,
-				      <&pmx_core  54  65 1>,
-				      <&pmx_core  55  64 1>,
-				      <&pmx_core  56  63 1>,
-				      <&pmx_core  57  62 1>,
-				      <&pmx_core  58  61 1>,
-				      <&pmx_core  59  60 1>,
-				      <&pmx_core  60  59 1>,
-				      <&pmx_core  61  58 1>,
-				      <&pmx_core  62  57 1>,
-				      <&pmx_core  63  56 1>,
-				      <&pmx_core  64  87 1>,
-				      <&pmx_core  65  86 1>,
-				      <&pmx_core  66  85 1>,
-				      <&pmx_core  67  84 1>,
-				      <&pmx_core  68  83 1>,
-				      <&pmx_core  69  82 1>,
-				      <&pmx_core  70  81 1>,
-				      <&pmx_core  71  80 1>,
-				      <&pmx_core  72  70 1>,
-				      <&pmx_core  73  78 1>,
-				      <&pmx_core  74  77 1>,
-				      <&pmx_core  75  76 1>,
-				      <&pmx_core  76  75 1>,
-				      <&pmx_core  77  74 1>,
-				      <&pmx_core  78  73 1>,
-				      <&pmx_core  79  72 1>,
-				      <&pmx_core  80 103 1>,
-				      <&pmx_core  81 102 1>,
-				      <&pmx_core  82 101 1>,
-				      <&pmx_core  83 100 1>,
-				      <&pmx_core  84  99 1>,
-				      <&pmx_core  85  98 1>,
-				      <&pmx_core  86  97 1>,
-				      <&pmx_core  87  96 1>,
-				      <&pmx_core  88  95 1>,
-				      <&pmx_core  89  94 1>,
-				      <&pmx_core  90  93 1>,
-				      <&pmx_core  91  92 1>,
-				      <&pmx_core  92  91 1>,
-				      <&pmx_core  93  90 1>,
-				      <&pmx_core  94  89 1>,
-				      <&pmx_core  95  88 1>,
-				      <&pmx_core  96 158 1>,
-				      <&pmx_core  97 157 1>,
-				      <&pmx_core  98 156 1>,
-				      <&pmx_core  99 155 1>,
-				      <&pmx_core 100 154 1>,
-				      <&pmx_core 101 129 1>,
-				      <&pmx_core 102 113 1>,
-				      <&pmx_core 103 112 1>,
-				      <&pmx_core 104 111 1>,
-				      <&pmx_core 105 110 1>,
-				      <&pmx_core 106 109 1>,
-				      <&pmx_core 107 108 1>,
-				      <&pmx_core 108 107 1>,
-				      <&pmx_core 109 106 1>,
-				      <&pmx_core 110 105 1>,
-				      <&pmx_core 111 104 1>,
-				      <&pmx_core 112 145 1>,
-				      <&pmx_core 113 144 1>,
-				      <&pmx_core 114 143 1>,
-				      <&pmx_core 115 142 1>,
-				      <&pmx_core 116 141 1>,
-				      <&pmx_core 117 140 1>,
-				      <&pmx_core 118 139 1>,
-				      <&pmx_core 119 138 1>,
-				      <&pmx_core 120 137 1>,
-				      <&pmx_core 121 136 1>,
-				      <&pmx_core 122 135 1>,
-				      <&pmx_core 123 134 1>,
-				      <&pmx_core 124 133 1>,
-				      <&pmx_core 125 132 1>,
-				      <&pmx_core 126 131 1>,
-				      <&pmx_core 127 130 1>,
-				      <&pmx_core 128 159 1>,
-				      <&pmx_core 129  31 1>,
-				      <&pmx_core 130  30 1>,
-				      <&pmx_core 131  20 1>,
-				      <&pmx_core 132  28 1>,
-				      <&pmx_core 133  27 1>,
-				      <&pmx_core 134  26 1>,
-				      <&pmx_core 135  23 1>,
-				      <&pmx_core 136 153 1>,
-				      <&pmx_core 137 152 1>,
-				      <&pmx_core 138 151 1>,
-				      <&pmx_core 139 150 1>,
-				      <&pmx_core 140 149 1>,
-				      <&pmx_core 141 148 1>,
-				      <&pmx_core 142 147 1>,
-				      <&pmx_core 143 146 1>;
-		};
-		psc1: clock-controller@227000 {
-			compatible = "ti,da850-psc1";
-			reg = <0x227000 0x1000>;
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>,
-				 <&async3_clk>;
-			clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3";
-			assigned-clocks = <&async3_clk>;
-			assigned-clock-parents = <&pll1_sysclk 2>;
-		};
-		pinconf: pin-controller@22c00c {
-			compatible = "ti,da850-pupd";
-			reg = <0x22c00c 0x8>;
-			status = "disabled";
-		};
-
-		mcasp0: mcasp@100000 {
-			compatible = "ti,da830-mcasp-audio";
-			reg = <0x100000 0x2000>,
-			      <0x102000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <54>;
-			interrupt-names = "common";
-			power-domains = <&psc1 7>;
-			status = "disabled";
-			dmas = <&edma0 1 1>,
-				<&edma0 0 1>;
-			dma-names = "tx", "rx";
-		};
-
-		lcdc: display@213000 {
-			compatible = "ti,da850-tilcdc";
-			reg = <0x213000 0x1000>;
-			interrupts = <52>;
-			max-pixelclock = <37500>;
-			clocks = <&psc1 16>;
-			clock-names = "fck";
-			power-domains = <&psc1 16>;
-			status = "disabled";
-		};
-	};
-	aemif: aemif@68000000 {
-		compatible = "ti,da850-aemif";
-		#address-cells = <2>;
-		#size-cells = <1>;
-
-		reg = <0x68000000 0x00008000>;
-		ranges = <0 0 0x60000000 0x08000000
-			  1 0 0x68000000 0x00008000>;
-		clocks = <&psc0 3>;
-		clock-names = "aemif";
-		clock-ranges;
-		status = "disabled";
-	};
-	memctrl: memory-controller@b0000000 {
-		compatible = "ti,da850-ddr-controller";
-		reg = <0xb0000000 0xe8>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/dm3725.dtsi b/arch/arm/boot/dts/dm3725.dtsi
deleted file mode 100644
index d24e906a14b11..0000000000000
--- a/arch/arm/boot/dts/dm3725.dtsi
+++ /dev/null
@@ -1,10 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
- */
-
-#include "omap36xx.dtsi"
-
-&sgx_module {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
deleted file mode 100644
index fe3f9a970b188..0000000000000
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include "dm814x.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "DM8148 EVM";
-	compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;	/* 1 GB */
-	};
-
-	/* MIC94060YC6 controlled by SD1_POW pin */
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&cpsw_emac0 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-id";
-};
-
-&cpsw_emac1 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-id";
-};
-
-&davinci_mdio {
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>; /* termcount */
-		linux,mtd-name = "micron,mt29f2g16aadwp";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ti,nand-ecc-opt = "bch8";
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		partition@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1c0000>;
-		};
-		partition@1c0000 {
-			label = "Environment";
-			reg = <0x240000 0x40000>;
-		};
-		partition@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x500000>;
-		};
-		partition@780000 {
-			label = "Filesystem";
-			reg = <0x780000 0xf880000>;
-		};
-	};
-};
-
-&mmc1 {
-        status = "disabled";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-};
-
-&mmc3 {
-        status = "disabled";
-};
-
-&pincntl {
-	sd1_pins: pinmux_sd1_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
-			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
-			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[0] */
-			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[1] */
-			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[2] */
-			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[3] */
-			DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)	/* SD1_POW */
-			DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)	/* GP1[6] */
-			>;
-	};
-
-	usb0_pins: pinmux_usb0_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
-			>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
-			>;
-	};
-};
-
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins>;
-	dr_mode = "host";
-};
-
-&usb1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
deleted file mode 100644
index 79ccdd4470f4c..0000000000000
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include "dm814x.dtsi"
-
-/ {
-	model = "HP t410 Smart Zero Client";
-	compatible = "hp,t410", "ti,dm8148", "ti,dm814";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;	/* 1 GB */
-	};
-
-	/* gpio9 seems to control USB VBUS regulator and/or hub power */
-	usb_power: regulator@9 {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&cpsw_emac0 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-id";
-};
-
-&cpsw_emac1 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-id";
-};
-
-&davinci_mdio {
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&mmc1 {
-	status = "disabled";
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	dmas = <&edma_xbar 8 0 1	/* use SDTXEVT1 instead of MCASP0TX */
-		&edma_xbar 9 0 2>;	/* use SDRXEVT1 instead of MCASP0RX */
-	dma-names = "tx", "rx";
-	non-removable;
-};
-
-&pincntl {
-	sd2_pins: pinmux_sd2_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[7] */
-			DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[6] */
-			DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[5] */
-			DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[4] */
-			DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[3] */
-			DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[2] */
-			DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[1] */
-			DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[0] */
-			DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1)		/* SD2_CLK */
-			DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2)	/* SD2_CMD */
-			DM814X_IOPAD(0x0920, PIN_INPUT | 0x40)	/* SD2_SDCD */
-			>;
-	};
-
-	usb0_pins: pinmux_usb0_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
-			>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
-			>;
-	};
-};
-
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins>;
-	dr_mode = "host";
-};
-
-&usb1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi
deleted file mode 100644
index f7939f43413b9..0000000000000
--- a/arch/arm/boot/dts/dm814x-clocks.dtsi
+++ /dev/null
@@ -1,379 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-&pllss {
-	/*
-	 * See TRM "2.6.10 Connected outputso DPLLS" and
-	 * "2.6.11 Connected Outputs of DPLLJ". Only clkout is
-	 * connected except for hdmi and usb.
-	 */
-	adpll_mpu_ck: adpll@40 {
-		#clock-cells = <1>;
-		compatible = "ti,dm814-adpll-s-clock";
-		reg = <0x40 0x40>;
-		clocks = <&devosc_ck &devosc_ck &devosc_ck>;
-		clock-names = "clkinp", "clkinpulow", "clkinphif";
-		clock-output-names = "481c5040.adpll.dcoclkldo",
-				     "481c5040.adpll.clkout",
-				     "481c5040.adpll.clkoutx2",
-				     "481c5040.adpll.clkouthif";
-	};
-
-	adpll_dsp_ck: adpll@80 {
-		#clock-cells = <1>;
-		compatible = "ti,dm814-adpll-lj-clock";
-		reg = <0x80 0x30>;
-		clocks = <&devosc_ck &devosc_ck>;
-		clock-names = "clkinp", "clkinpulow";
-		clock-output-names = "481c5080.adpll.dcoclkldo",
-				     "481c5080.adpll.clkout",
-				     "481c5080.adpll.clkoutldo";
-	};
-
-	adpll_sgx_ck: adpll@b0 {
-		#clock-cells = <1>;
-		compatible = "ti,dm814-adpll-lj-clock";
-		reg = <0xb0 0x30>;
-		clocks = <&devosc_ck &devosc_ck>;
-		clock-names = "clkinp", "clkinpulow";
-		clock-output-names = "481c50b0.adpll.dcoclkldo",
-				     "481c50b0.adpll.clkout",
-				     "481c50b0.adpll.clkoutldo";
-	};
-
-	adpll_hdvic_ck: adpll@e0 {
-		#clock-cells = <1>;
-		compatible = "ti,dm814-adpll-lj-clock";
-		reg = <0xe0 0x30>;
-		clocks = <&devosc_ck &devosc_ck>;
-		clock-names = "clkinp", "clkinpulow";
-		clock-output-names = "481c50e0.adpll.dcoclkldo",
-				     "481c50e0.adpll.clkout",
-				     "481c50e0.adpll.clkoutldo";
-	};
-
-	adpll_l3_ck: adpll@110 {
-		#clock-cells = <1>;
-		compatible = "ti,dm814-adpll-lj-clock";
-		reg = <0x110 0x30>;
-		clocks = <&devosc_ck &devosc_ck>;
-		clock-names = "clkinp", "clkinpulow";
-		clock-output-names = "481c5110.adpll.dcoclkldo",
-				     "481c5110.adpll.clkout",
-				     "481c5110.adpll.clkoutldo";
-	};
-
-	adpll_isp_ck: adpll@140 {
-		#clock-cells = <1>;
-		compatible = "ti,dm814-adpll-lj-clock";
-		reg = <0x140 0x30>;
-		clocks = <&devosc_ck &devosc_ck>;
-		clock-names = "clkinp", "clkinpulow";
-		clock-output-names = "481c5140.adpll.dcoclkldo",
-				     "481c5140.adpll.clkout",
-				     "481c5140.adpll.clkoutldo";
-	};
-
-	adpll_dss_ck: adpll@170 {
-		#clock-cells = <1>;
-		compatible = "ti,dm814-adpll-lj-clock";
-		reg = <0x170 0x30>;
-		clocks = <&devosc_ck &devosc_ck>;
-		clock-names = "clkinp", "clkinpulow";
-		clock-output-names = "481c5170.adpll.dcoclkldo",
-				     "481c5170.adpll.clkout",
-				     "481c5170.adpll.clkoutldo";
-	};
-
-	adpll_video0_ck: adpll@1a0 {
-		#clock-cells = <1>;
-		compatible = "ti,dm814-adpll-lj-clock";
-		reg = <0x1a0 0x30>;
-		clocks = <&devosc_ck &devosc_ck>;
-		clock-names = "clkinp", "clkinpulow";
-		clock-output-names = "481c51a0.adpll.dcoclkldo",
-				     "481c51a0.adpll.clkout",
-				     "481c51a0.adpll.clkoutldo";
-	};
-
-	adpll_video1_ck: adpll@1d0 {
-		#clock-cells = <1>;
-		compatible = "ti,dm814-adpll-lj-clock";
-		reg = <0x1d0 0x30>;
-		clocks = <&devosc_ck &devosc_ck>;
-		clock-names = "clkinp", "clkinpulow";
-		clock-output-names = "481c51d0.adpll.dcoclkldo",
-				     "481c51d0.adpll.clkout",
-				     "481c51d0.adpll.clkoutldo";
-	};
-
-	adpll_hdmi_ck: adpll@200 {
-		#clock-cells = <1>;
-		compatible = "ti,dm814-adpll-lj-clock";
-		reg = <0x200 0x30>;
-		clocks = <&devosc_ck &devosc_ck>;
-		clock-names = "clkinp", "clkinpulow";
-		clock-output-names = "481c5200.adpll.dcoclkldo",
-				     "481c5200.adpll.clkout",
-				     "481c5200.adpll.clkoutldo";
-	};
-
-	adpll_audio_ck: adpll@230 {
-		#clock-cells = <1>;
-		compatible = "ti,dm814-adpll-lj-clock";
-		reg = <0x230 0x30>;
-		clocks = <&devosc_ck &devosc_ck>;
-		clock-names = "clkinp", "clkinpulow";
-		clock-output-names = "481c5230.adpll.dcoclkldo",
-				     "481c5230.adpll.clkout",
-				     "481c5230.adpll.clkoutldo";
-	};
-
-	adpll_usb_ck: adpll@260 {
-		#clock-cells = <1>;
-		compatible = "ti,dm814-adpll-lj-clock";
-		reg = <0x260 0x30>;
-		clocks = <&devosc_ck &devosc_ck>;
-		clock-names = "clkinp", "clkinpulow";
-		clock-output-names = "481c5260.adpll.dcoclkldo",
-				     "481c5260.adpll.clkout",
-				     "481c5260.adpll.clkoutldo";
-	};
-
-	adpll_ddr_ck: adpll@290 {
-		#clock-cells = <1>;
-		compatible = "ti,dm814-adpll-lj-clock";
-		reg = <0x290 0x30>;
-		clocks = <&devosc_ck &devosc_ck>;
-		clock-names = "clkinp", "clkinpulow";
-		clock-output-names = "481c5290.adpll.dcoclkldo",
-				     "481c5290.adpll.clkout",
-				     "481c5290.adpll.clkoutldo";
-	};
-};
-
-&pllss_clocks {
-	timer1_fck: timer1_fck@2e0 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
-			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x2e0>;
-	};
-
-	timer2_fck: timer2_fck@2e0 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
-			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x2e0>;
-	};
-
-	/* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&adpll_video0_ck 1
-			  &adpll_video1_ck 1
-			  &adpll_audio_ck 1>;
-		ti,bit-shift = <1>;
-		reg = <0x2e8>;
-	};
-
-	/* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-	};
-
-	sysclk18_ck: sysclk18_ck@2f0 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&rtcosc_ck>, <&rtcdivider_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x02f0>;
-	};
-};
-
-&scm_clocks {
-	devosc_ck: devosc_ck@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_20000000_ck>, <&virt_19200000_ck>;
-		ti,bit-shift = <21>;
-		reg = <0x0040>;
-	};
-
-	/* Optional auxosc, 20 - 30 MHz range, assume 22.5729 MHz by default */
-	auxosc_ck: auxosc_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <22572900>;
-	};
-
-	/* Optional 32768Hz crystal or clock on RTCOSC pins */
-	rtcosc_ck: rtcosc_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	/* Optional external clock on TCLKIN pin, set rate in baord dts file */
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	virt_20000000_ck: virt_20000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <20000000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	mpu_ck: mpu_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <1000000000>;
-	};
-};
-
-&prcm_clocks {
-	osc_src_ck: osc_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&devosc_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mpu_clksrc_ck: mpu_clksrc_ck@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&devosc_ck>, <&rtcdivider_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0040>;
-	};
-
-	/* Fixed divider clock 0.0016384 * devosc */
-	rtcdivider_ck: rtcdivider_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&devosc_ck>;
-		clock-mult = <128>;
-		clock-div = <78125>;
-	};
-
-	/* L4_HS 220 MHz*/
-	sysclk4_ck: sysclk4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&adpll_l3_ck 1>;
-		ti,clock-mult = <1>;
-		ti,clock-div = <1>;
-	};
-
-	/* L4_FWCFG */
-	sysclk5_ck: sysclk5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&adpll_l3_ck 1>;
-		ti,clock-mult = <1>;
-		ti,clock-div = <2>;
-	};
-
-	/* L4_LS 110 MHz */
-	sysclk6_ck: sysclk6_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&adpll_l3_ck 1>;
-		ti,clock-mult = <1>;
-		ti,clock-div = <2>;
-	};
-
-	sysclk8_ck: sysclk8_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&adpll_usb_ck 1>;
-		ti,clock-mult = <1>;
-		ti,clock-div = <1>;
-	};
-
-	sysclk10_ck: sysclk10_ck {
-		compatible = "ti,divider-clock";
-		reg = <0x324>;
-		ti,max-div = <7>;
-		#clock-cells = <0>;
-		clocks = <&adpll_usb_ck 1>;
-	};
-
-	aud_clkin0_ck: aud_clkin0_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <20000000>;
-	};
-
-	aud_clkin1_ck: aud_clkin1_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <20000000>;
-	};
-
-	aud_clkin2_ck: aud_clkin2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <20000000>;
-	};
-};
-
-&prcm {
-	default_cm: default_cm@500 {
-		compatible = "ti,omap4-cm";
-		reg = <0x500 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x500 0x100>;
-
-		default_clkctrl: clk@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x5c>;
-			#clock-cells = <2>;
-		};
-	};
-
-	alwon_cm: alwon_cm@1400 {
-		compatible = "ti,omap4-cm";
-		reg = <0x1400 0x300>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1400 0x300>;
-
-		alwon_clkctrl: clk@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x228>;
-			#clock-cells = <2>;
-		};
-	};
-
-	alwon_ethernet_cm: alwon_ethernet_cm@15d4 {
-		compatible = "ti,omap4-cm";
-		reg = <0x15d4 0x4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x15d4 0x4>;
-
-		alwon_ethernet_clkctrl: clk@0 {
-			compatible = "ti,clkctrl";
-			reg = <0 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
deleted file mode 100644
index a8cd724ce4bc4..0000000000000
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ /dev/null
@@ -1,788 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/clock/dm814.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/dm814x.h>
-
-/ {
-	compatible = "ti,dm814";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		phy0 = &usb0_phy;
-		phy1 = &usb1_phy;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		usb: usb@47400000 {
-			compatible = "ti,am33xx-usb";
-			reg = <0x47400000 0x1000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "usb_otg_hs";
-
-			usb0_phy: usb-phy@47401300 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401300 0x100>;
-				reg-names = "phy";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-				#phy-cells = <0>;
-			};
-
-			usb0: usb@47401000 {
-				compatible = "ti,musb-am33xx";
-				reg = <0x47401400 0x400
-				       0x47401000 0x200>;
-				reg-names = "mc", "control";
-
-				interrupts = <18>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb0_phy>;
-
-				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
-					&cppi41dma  2 0 &cppi41dma  3 0
-					&cppi41dma  4 0 &cppi41dma  5 0
-					&cppi41dma  6 0 &cppi41dma  7 0
-					&cppi41dma  8 0 &cppi41dma  9 0
-					&cppi41dma 10 0 &cppi41dma 11 0
-					&cppi41dma 12 0 &cppi41dma 13 0
-					&cppi41dma 14 0 &cppi41dma  0 1
-					&cppi41dma  1 1 &cppi41dma  2 1
-					&cppi41dma  3 1 &cppi41dma  4 1
-					&cppi41dma  5 1 &cppi41dma  6 1
-					&cppi41dma  7 1 &cppi41dma  8 1
-					&cppi41dma  9 1 &cppi41dma 10 1
-					&cppi41dma 11 1 &cppi41dma 12 1
-					&cppi41dma 13 1 &cppi41dma 14 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			usb1: usb@47401800 {
-				compatible = "ti,musb-am33xx";
-				reg = <0x47401c00 0x400
-					0x47401800 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <19>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb1_phy>;
-
-				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
-					&cppi41dma 17 0 &cppi41dma 18 0
-					&cppi41dma 19 0 &cppi41dma 20 0
-					&cppi41dma 21 0 &cppi41dma 22 0
-					&cppi41dma 23 0 &cppi41dma 24 0
-					&cppi41dma 25 0 &cppi41dma 26 0
-					&cppi41dma 27 0 &cppi41dma 28 0
-					&cppi41dma 29 0 &cppi41dma 15 1
-					&cppi41dma 16 1 &cppi41dma 17 1
-					&cppi41dma 18 1 &cppi41dma 19 1
-					&cppi41dma 20 1 &cppi41dma 21 1
-					&cppi41dma 22 1 &cppi41dma 23 1
-					&cppi41dma 24 1 &cppi41dma 25 1
-					&cppi41dma 26 1 &cppi41dma 27 1
-					&cppi41dma 28 1 &cppi41dma 29 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			cppi41dma: dma-controller@47402000 {
-				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
-				reg-names = "glue", "controller", "scheduler", "queuemgr";
-				interrupts = <17>;
-				interrupt-names = "glue";
-				#dma-cells = <2>;
-				/* For backwards compatibility: */
-				#dma-channels = <30>;
-				dma-channels = <30>;
-				#dma-requests = <256>;
-				dma-requests = <256>;
-			};
-		};
-
-		/*
-		 * See TRM "Table 1-317. L4LS Instance Summary" for hints.
-		 * It shows the module target agent registers though, so the
-		 * actual device is typically 0x1000 before the target agent
-		 * except in cases where the module is larger than 0x1000.
-		 */
-		l4ls: l4ls@48000000 {
-			compatible = "ti,dm814-l4ls", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48000000 0x2000000>;
-
-			i2c1: i2c@28000 {
-				compatible = "ti,omap4-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "i2c1";
-				reg = <0x28000 0x1000>;
-				interrupts = <70>;
-			};
-
-			elm: elm@80000 {
-				compatible = "ti,814-elm";
-				ti,hwmods = "elm";
-				reg = <0x80000 0x2000>;
-				interrupts = <4>;
-			};
-
-			gpio1: gpio@32000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio1";
-				ti,gpio-always-on;
-				reg = <0x32000 0x2000>;
-				interrupts = <96>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@4c000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio2";
-				ti,gpio-always-on;
-				reg = <0x4c000 0x2000>;
-				interrupts = <98>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@1ac000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio3";
-				ti,gpio-always-on;
-				reg = <0x1ac000 0x2000>;
-				interrupts = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@1ae000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio4";
-				ti,gpio-always-on;
-				reg = <0x1ae000 0x2000>;
-				interrupts = <62>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			i2c2: i2c@2a000 {
-				compatible = "ti,omap4-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "i2c2";
-				reg = <0x2a000 0x1000>;
-				interrupts = <71>;
-			};
-
-			mcspi1: spi@30000 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x30000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <65>;
-				ti,spi-num-cs = <4>;
-				ti,hwmods = "mcspi1";
-				dmas = <&edma 16 0 &edma 17 0
-					&edma 18 0 &edma 19 0
-					&edma 20 0 &edma 21 0
-					&edma 22 0 &edma 23 0>;
-
-				dma-names = "tx0", "rx0", "tx1", "rx1",
-					"tx2", "rx2", "tx3", "rx3";
-			};
-
-			mcspi2: spi@1a0000 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x1a0000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <125>;
-				ti,spi-num-cs = <4>;
-				ti,hwmods = "mcspi2";
-				dmas = <&edma 42 0 &edma 43 0
-					&edma 44 0 &edma 45 0>;
-				dma-names = "tx0", "rx0", "tx1", "rx1";
-			};
-
-			/* Board must configure dmas with edma_xbar for EDMA */
-			mcspi3: spi@1a2000 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x1a2000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <126>;
-				ti,spi-num-cs = <4>;
-				ti,hwmods = "mcspi3";
-			};
-
-			mcspi4: spi@1a4000 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x1a4000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <127>;
-				ti,spi-num-cs = <4>;
-				ti,hwmods = "mcspi4";
-			};
-
-			timer1_target: target-module@2e000 {
-				compatible = "ti,sysc-omap4-timer", "ti,sysc";
-				reg = <0x2e000 0x4>,
-				      <0x2e010 0x4>;
-				reg-names = "rev", "sysc";
-				ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-						<SYSC_IDLE_NO>,
-						<SYSC_IDLE_SMART>,
-						<SYSC_IDLE_SMART_WKUP>;
-				clocks = <&timer1_fck>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x2e000 0x1000>;
-
-				timer1: timer@0 {
-					compatible = "ti,am335x-timer-1ms";
-					reg = <0x0 0x400>;
-					interrupts = <67>;
-					ti,timer-alwon;
-					clocks = <&timer1_fck>;
-					clock-names = "fck";
-				};
-			};
-
-			uart1: serial@20000 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				ti,hwmods = "uart1";
-				reg = <0x20000 0x2000>;
-				clock-frequency = <48000000>;
-				interrupts = <72>;
-				dmas = <&edma 26 0 &edma 27 0>;
-				dma-names = "tx", "rx";
-			};
-
-			uart2: serial@22000 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				ti,hwmods = "uart2";
-				reg = <0x22000 0x2000>;
-				clock-frequency = <48000000>;
-				interrupts = <73>;
-				dmas = <&edma 28 0 &edma 29 0>;
-				dma-names = "tx", "rx";
-			};
-
-			uart3: serial@24000 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				ti,hwmods = "uart3";
-				reg = <0x24000 0x2000>;
-				clock-frequency = <48000000>;
-				interrupts = <74>;
-				dmas = <&edma 30 0 &edma 31 0>;
-				dma-names = "tx", "rx";
-			};
-
-			timer2_target: target-module@40000 {
-				compatible = "ti,sysc-omap4-timer", "ti,sysc";
-				reg = <0x40000 0x4>,
-				      <0x40010 0x4>;
-				reg-names = "rev", "sysc";
-				ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-						<SYSC_IDLE_NO>,
-						<SYSC_IDLE_SMART>,
-						<SYSC_IDLE_SMART_WKUP>;
-				clocks = <&timer2_fck>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x40000 0x1000>;
-
-				timer2: timer@0 {
-					compatible = "ti,dm814-timer";
-					reg = <0 0x1000>;
-					interrupts = <68>;
-					clocks = <&timer2_fck>;
-					clock-names = "fck";
-				};
-			};
-
-			timer3: timer@42000 {
-				compatible = "ti,dm814-timer";
-				reg = <0x42000 0x2000>;
-				interrupts = <69>;
-				ti,hwmods = "timer3";
-			};
-
-			mmc1: mmc@60000 {
-				compatible = "ti,omap4-hsmmc";
-				ti,hwmods = "mmc1";
-				dmas = <&edma 24 0
-					&edma 25 0>;
-				dma-names = "tx", "rx";
-				interrupts = <64>;
-				interrupt-parent = <&intc>;
-				reg = <0x60000 0x1000>;
-			};
-
-			rtc: rtc@c0000 {
-				compatible = "ti,am3352-rtc", "ti,da830-rtc";
-				reg = <0xc0000 0x1000>;
-				interrupts = <75 76>;
-				ti,hwmods = "rtc";
-			};
-
-			mmc2: mmc@1d8000 {
-				compatible = "ti,omap4-hsmmc";
-				ti,hwmods = "mmc2";
-				dmas = <&edma 2 0
-					&edma 3 0>;
-				dma-names = "tx", "rx";
-				interrupts = <28>;
-				interrupt-parent = <&intc>;
-				reg = <0x1d8000 0x1000>;
-			};
-
-			control: control@140000 {
-				compatible = "ti,dm814-scm", "simple-bus";
-				reg = <0x140000 0x20000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x140000 0x20000>;
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
-					reg = <0x0 0x800>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0 0x800>;
-
-					phy_gmii_sel: phy-gmii-sel {
-						compatible = "ti,dm814-phy-gmii-sel";
-						reg = <0x650 0x4>;
-						#phy-cells = <1>;
-					};
-
-					scm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-
-					scm_clockdomains: clockdomains {
-					};
-				};
-
-				usb_ctrl_mod: control@620 {
-					compatible = "ti,am335x-usb-ctrl-module";
-					reg = <0x620 0x10
-						0x648 0x4>;
-					reg-names = "phy_ctrl", "wakeup";
-				};
-
-				edma_xbar: dma-router@f90 {
-					compatible = "ti,am335x-edma-crossbar";
-					reg = <0xf90 0x40>;
-					#dma-cells = <3>;
-					dma-requests = <32>;
-					dma-masters = <&edma>;
-				};
-
-				/*
-				 * Note that silicon revision 2.1 and older
-				 * require input enabled (bit 18 set) for all
-				 * 3.3V I/Os to avoid cumulative hardware damage.
-				 * For more info, see errata advisory 2.1.87.
-				 * We leave bit 18 out of function-mask and rely
-				 * on the bootloader for it.
-				 */
-				pincntl: pinmux@800 {
-					compatible = "pinctrl-single";
-					reg = <0x800 0x438>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0x307ff>;
-				};
-
-				usb1_phy: usb-phy@1b00 {
-					compatible = "ti,am335x-usb-phy";
-					reg = <0x1b00 0x100>;
-					reg-names = "phy";
-					ti,ctrl_mod = <&usb_ctrl_mod>;
-					#phy-cells = <0>;
-				};
-			};
-
-			prcm: prcm@180000 {
-				compatible = "ti,dm814-prcm", "simple-bus";
-				reg = <0x180000 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x180000 0x2000>;
-
-				prcm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prcm_clockdomains: clockdomains {
-				};
-			};
-
-			/* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
-			pllss: pllss@1c5000 {
-				compatible = "ti,dm814-pllss", "simple-bus";
-				reg = <0x1c5000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1c5000 0x1000>;
-
-				pllss_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				pllss_clockdomains: clockdomains {
-				};
-			};
-
-			wdt1: wdt@1c7000 {
-				compatible = "ti,omap3-wdt";
-				ti,hwmods = "wd_timer";
-				reg = <0x1c7000 0x1000>;
-				interrupts = <91>;
-			};
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,dm814-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		/* Board must configure evtmux with edma_xbar for EDMA */
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc3";
-			interrupts = <29>;
-			interrupt-parent = <&intc>;
-			reg = <0x47810000 0x1000>;
-		};
-
-		target-module@49000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49000000 0x4>;
-			reg-names = "rev";
-			clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49000000 0x10000>;
-
-			edma: dma@0 {
-				compatible = "ti,edma3-tpcc";
-				reg = <0 0x10000>;
-				reg-names = "edma3_cc";
-				interrupts = <12 13 14>;
-				interrupt-names = "edma3_ccint", "edma3_mperr",
-						  "edma3_ccerrint";
-				dma-requests = <64>;
-				#dma-cells = <2>;
-
-				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-					   <&edma_tptc2 3>, <&edma_tptc3 0>;
-
-				ti,edma-memcpy-channels = <20 21>;
-			};
-		};
-
-		target-module@49800000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49800000 0x4>,
-			      <0x49800010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49800000 0x100000>;
-
-			edma_tptc0: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <112>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@49900000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49900000 0x4>,
-			      <0x49900010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49900000 0x100000>;
-
-			edma_tptc1: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <113>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@49a00000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49a00000 0x4>,
-			      <0x49a00010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49a00000 0x100000>;
-
-			edma_tptc2: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <114>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@49b00000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49b00000 0x4>,
-			      <0x49b00010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49b00000 0x100000>;
-
-			edma_tptc3: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <115>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		/* See TRM "Table 1-318. L4HS Instance Summary" */
-		l4hs: l4hs@4a000000 {
-			compatible = "ti,dm814-l4hs", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4a000000 0x1b4040>;
-
-			target-module@100000 {
-				compatible = "ti,sysc-omap4-simple", "ti,sysc";
-				reg = <0x100900 0x4>,
-				      <0x100908 0x4>,
-				      <0x100904 0x4>;
-				reg-names = "rev", "sysc", "syss";
-				ti,sysc-mask = <0>;
-				ti,sysc-midle = <SYSC_IDLE_FORCE>,
-						<SYSC_IDLE_NO>;
-				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-						<SYSC_IDLE_NO>;
-				ti,syss-mask = <1>;
-				clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x100000 0x8000>;
-
-				mac: ethernet@0 {
-					compatible = "ti,cpsw";
-					clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-					clock-names = "fck", "cpts";
-					cpdma_channels = <8>;
-					ale_entries = <1024>;
-					bd_ram_size = <0x2000>;
-					mac_control = <0x20>;
-					slaves = <2>;
-					active_slave = <0>;
-					cpts_clock_mult = <0x80000000>;
-					cpts_clock_shift = <29>;
-					reg = <0 0x800>,
-					      <0x900 0x100>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					/*
-					* c0_rx_thresh_pend
-					* c0_rx_pend
-					* c0_tx_pend
-					* c0_misc_pend
-					*/
-					interrupts = <40 41 42 43>;
-					ranges = <0 0 0x8000>;
-					syscon = <&scm_conf>;
-
-					davinci_mdio: mdio@800 {
-						compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
-						clocks = <&cpsw_125mhz_gclk>;
-						clock-names = "fck";
-						#address-cells = <1>;
-						#size-cells = <0>;
-						bus_freq = <1000000>;
-						reg = <0x800 0x100>;
-					};
-
-					cpsw_emac0: slave@200 {
-						/* Filled in by U-Boot */
-						mac-address = [ 00 00 00 00 00 00 ];
-						phys = <&phy_gmii_sel 1>;
-					};
-
-					cpsw_emac1: slave@300 {
-						/* Filled in by U-Boot */
-						mac-address = [ 00 00 00 00 00 00 ];
-						phys = <&phy_gmii_sel 2>;
-					};
-				};
-			};
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			ti,no-idle-on-init;
-			reg = <0x50000000 0x2000>;
-			interrupts = <100>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-};
-
-#include "dm814x-clocks.dtsi"
-
-/* Preferred always-on timer for clocksource */
-&timer1_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&timer1_fck>;
-		assigned-clock-parents = <&devosc_ck>;
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&timer2_fck>;
-		assigned-clock-parents = <&devosc_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
deleted file mode 100644
index 244a957f9ba3a..0000000000000
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include "dm816x.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "DM8168 EVM";
-	compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000	/* 1 GB */
-		       0xc0000000 0x40000000>;	/* 1 GB */
-	};
-
-	/* FDC6331L controlled by SD_POW pin */
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	sata_refclk: fixedclock0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-};
-
-&dm816x_pinmux {
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			DM816X_IOPAD(0x0a94, MUX_MODE0)			/* SPI_SCLK */
-			DM816X_IOPAD(0x0a98, MUX_MODE0)			/* SPI_SCS0 */
-			DM816X_IOPAD(0x0aa8, MUX_MODE0)			/* SPI_D0 */
-			DM816X_IOPAD(0x0aac, MUX_MODE0)			/* SPI_D1 */
-		>;
-	};
-
-	mmc_pins: pinmux_mmc_pins {
-		pinctrl-single,pins = <
-			DM816X_IOPAD(0x0a70, MUX_MODE0)			/* SD_POW */
-			DM816X_IOPAD(0x0a74, MUX_MODE0)			/* SD_CLK */
-			DM816X_IOPAD(0x0a78, MUX_MODE0)			/* SD_CMD */
-			DM816X_IOPAD(0x0a7C, MUX_MODE0)			/* SD_DAT0 */
-			DM816X_IOPAD(0x0a80, MUX_MODE0)			/* SD_DAT1 */
-			DM816X_IOPAD(0x0a84, MUX_MODE0)			/* SD_DAT2 */
-			DM816X_IOPAD(0x0a88, MUX_MODE0)			/* SD_DAT2 */
-			DM816X_IOPAD(0x0a8c, MUX_MODE2)			/* GP1[7] */
-			DM816X_IOPAD(0x0a90, MUX_MODE2)			/* GP1[8] */
-		>;
-	};
-
-	usb0_pins: pinmux_usb0_pins {
-		pinctrl-single,pins = <
-			DM816X_IOPAD(0x0d04, MUX_MODE0)			/* USB0_DRVVBUS */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			DM816X_IOPAD(0x0d08, MUX_MODE0)			/* USB1_DRVVBUS */
-		>;
-	};
-
-	nandflash_pins: nandflash_pins {
-		pinctrl-single,pins = <
-			DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0)		/* PINCTRL207 GPMC_CS0*/
-			DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0)		/* PINCTRL217 GPMC_ADV_ALE */
-			DM816X_IOPAD(0x0b54, PULL_UP | PULL_ENA | MUX_MODE0)	/* PINCTRL214 GPMC_OE_RE */
-			DM816X_IOPAD(0x0b58, PULL_ENA | MUX_MODE0)		/* PINCTRL215 GPMC_BE0_CLE */
-			DM816X_IOPAD(0x0b50, PULL_UP | MUX_MODE0)		/* PINCTRL213 GPMC_WE */
-			DM816X_IOPAD(0x0b6c, MUX_MODE0)				/* PINCTRL220 GPMC_WAIT */
-			DM816X_IOPAD(0x0be4, PULL_ENA | MUX_MODE0)		/* PINCTRL250 GPMC_CLK */
-			DM816X_IOPAD(0x0ba4, MUX_MODE0)				/* PINCTRL234 GPMC_D0 */
-			DM816X_IOPAD(0x0ba8, MUX_MODE0)				/* PINCTRL234 GPMC_D1 */
-			DM816X_IOPAD(0x0bac, MUX_MODE0)				/* PINCTRL234 GPMC_D2 */
-			DM816X_IOPAD(0x0bb0, MUX_MODE0)				/* PINCTRL234 GPMC_D3 */
-			DM816X_IOPAD(0x0bb4, MUX_MODE0)				/* PINCTRL234 GPMC_D4 */
-			DM816X_IOPAD(0x0bb8, MUX_MODE0)				/* PINCTRL234 GPMC_D5 */
-			DM816X_IOPAD(0x0bbc, MUX_MODE0)				/* PINCTRL234 GPMC_D6 */
-			DM816X_IOPAD(0x0bc0, MUX_MODE0)				/* PINCTRL234 GPMC_D7 */
-			DM816X_IOPAD(0x0bc4, MUX_MODE0)				/* PINCTRL234 GPMC_D8 */
-			DM816X_IOPAD(0x0bc8, MUX_MODE0)				/* PINCTRL234 GPMC_D9 */
-			DM816X_IOPAD(0x0bcc, MUX_MODE0)				/* PINCTRL234 GPMC_D10 */
-			DM816X_IOPAD(0x0bd0, MUX_MODE0)				/* PINCTRL234 GPMC_D11 */
-			DM816X_IOPAD(0x0bd4, MUX_MODE0)				/* PINCTRL234 GPMC_D12 */
-			DM816X_IOPAD(0x0bd8, MUX_MODE0)				/* PINCTRL234 GPMC_D13 */
-			DM816X_IOPAD(0x0bdc, MUX_MODE0)				/* PINCTRL234 GPMC_D14 */
-			DM816X_IOPAD(0x0be0, MUX_MODE0)				/* PINCTRL234 GPMC_D15 */
-		>;
-	};
-};
-
-&i2c1 {
-	extgpio0: pcf8575@20 {
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&i2c2 {
-	extgpio1: pcf8575@20 {
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		linux,mtd-name = "micron,mt29f2g16aadwp";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>; /* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		partition@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1c0000>;
-		};
-		partition@1c0000 {
-			label = "Environment";
-			reg = <0x240000 0x40000>;
-		};
-		partition@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x500000>;
-		};
-		partition@780000 {
-			label = "Filesystem";
-			reg = <0x780000 0xf880000>;
-		};
-	};
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-
-	flash@0 {
-		compatible = "w25x32";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
-};
-
-/* At least dm8168-evm rev c won't support multipoint, later may */
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins>;
-	mentor,multipoint = <0>;
-};
-
-&usb1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-	mentor,multipoint = <0>;
-};
-
-&sata {
-	clocks = <&sysclk5_ck>, <&sata_refclk>;
-};
diff --git a/arch/arm/boot/dts/dm816x-clocks.dtsi b/arch/arm/boot/dts/dm816x-clocks.dtsi
deleted file mode 100644
index 338449b32a183..0000000000000
--- a/arch/arm/boot/dts/dm816x-clocks.dtsi
+++ /dev/null
@@ -1,276 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-&scrm {
-	main_fapll: main_fapll {
-		#clock-cells = <1>;
-		compatible = "ti,dm816-fapll-clock";
-		reg = <0x400 0x40>;
-		clocks = <&sys_clkin_ck &sys_clkin_ck>;
-		clock-indices = <1>, <2>, <3>, <4>, <5>,
-				<6>, <7>;
-		clock-output-names = "main_pll_clk1",
-				     "main_pll_clk2",
-				     "main_pll_clk3",
-				     "main_pll_clk4",
-				     "main_pll_clk5",
-				     "main_pll_clk6",
-				     "main_pll_clk7";
-	};
-
-	ddr_fapll: ddr_fapll {
-		#clock-cells = <1>;
-		compatible = "ti,dm816-fapll-clock";
-		reg = <0x440 0x30>;
-		clocks = <&sys_clkin_ck &sys_clkin_ck>;
-		clock-indices = <1>, <2>, <3>, <4>;
-		clock-output-names = "ddr_pll_clk1",
-				     "ddr_pll_clk2",
-				     "ddr_pll_clk3",
-				     "ddr_pll_clk4";
-	};
-
-	video_fapll: video_fapll {
-		#clock-cells = <1>;
-		compatible = "ti,dm816-fapll-clock";
-		reg = <0x470 0x30>;
-		clocks = <&sys_clkin_ck &sys_clkin_ck>;
-		clock-indices = <1>, <2>, <3>;
-		clock-output-names = "video_pll_clk1",
-				     "video_pll_clk2",
-				     "video_pll_clk3";
-	};
-
-	audio_fapll: audio_fapll {
-		#clock-cells = <1>;
-		compatible = "ti,dm816-fapll-clock";
-		reg = <0x4a0 0x30>;
-		clocks = <&main_fapll 7>, < &sys_clkin_ck>;
-		clock-indices = <1>, <2>, <3>, <4>, <5>;
-		clock-output-names = "audio_pll_clk1",
-				     "audio_pll_clk2",
-				     "audio_pll_clk3",
-				     "audio_pll_clk4",
-				     "audio_pll_clk5";
-	};
-};
-
-&scrm_clocks {
-	secure_32k_ck: secure_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	sys_32k_ck: sys_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	sys_clkin_ck: sys_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-};
-
-/* 0x48180000 */
-&prcm_clocks {
-	clkout_pre_ck: clkout_pre_ck@100 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1
-			  &audio_fapll 1>;
-		reg = <0x100>;
-	};
-
-	clkout_div_ck: clkout_div_ck@100 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&clkout_pre_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <8>;
-		reg = <0x100>;
-	};
-
-	clkout_ck: clkout_ck@100 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkout_div_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x100>;
-	};
-
-	/* CM_DPLL clocks p1795 */
-	sysclk1_ck: sysclk1_ck@300 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&main_fapll 1>;
-		ti,max-div = <7>;
-		reg = <0x0300>;
-	};
-
-	sysclk2_ck: sysclk2_ck@304 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&main_fapll 2>;
-		ti,max-div = <7>;
-		reg = <0x0304>;
-	};
-
-	sysclk3_ck: sysclk3_ck@308 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&main_fapll 3>;
-		ti,max-div = <7>;
-		reg = <0x0308>;
-	};
-
-	sysclk4_ck: sysclk4_ck@30c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&main_fapll 4>;
-		ti,max-div = <1>;
-		reg = <0x030c>;
-	};
-
-	sysclk5_ck: sysclk5_ck@310 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sysclk4_ck>;
-		ti,max-div = <1>;
-		reg = <0x0310>;
-	};
-
-	sysclk6_ck: sysclk6_ck@314 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&main_fapll 4>;
-		ti,dividers = <2>, <4>;
-		reg = <0x0314>;
-	};
-
-	sysclk10_ck: sysclk10_ck@324 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&ddr_fapll 2>;
-		ti,max-div = <7>;
-		reg = <0x0324>;
-	};
-
-	sysclk24_ck: sysclk24_ck@3b4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&main_fapll 5>;
-		ti,max-div = <7>;
-		reg = <0x03b4>;
-	};
-
-	mpu_ck: mpu_ck@15dc {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sysclk2_ck>;
-		ti,bit-shift = <1>;
-                reg = <0x15dc>;
-	};
-
-	audio_pll_a_ck: audio_pll_a_ck@35c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&audio_fapll 1>;
-		ti,max-div = <7>;
-		reg = <0x035c>;
-	};
-
-	sysclk18_ck: sysclk18_ck@378 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_32k_ck>, <&audio_pll_a_ck>;
-		reg = <0x0378>;
-	};
-
-	timer1_fck: timer1_fck@390 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
-		reg = <0x0390>;
-	};
-
-	timer2_fck: timer2_fck@394 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
-		reg = <0x0394>;
-	};
-
-	timer3_fck: timer3_fck@398 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
-		reg = <0x0398>;
-	};
-
-	timer4_fck: timer4_fck@39c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
-		reg = <0x039c>;
-	};
-
-	timer5_fck: timer5_fck@3a0 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
-		reg = <0x03a0>;
-	};
-
-	timer6_fck: timer6_fck@3a4 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
-		reg = <0x03a4>;
-	};
-
-	timer7_fck: timer7_fck@3a8 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
-		reg = <0x03a8>;
-	};
-};
-
-&prcm {
-	default_cm: default_cm@500 {
-		compatible = "ti,omap4-cm";
-		reg = <0x500 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x500 0x100>;
-
-		default_clkctrl: clk@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x5c>;
-			#clock-cells = <2>;
-		};
-	};
-
-	alwon_cm: alwon_cm@1400 {
-		compatible = "ti,omap4-cm";
-		reg = <0x1400 0x300>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1400 0x300>;
-
-		alwon_clkctrl: clk@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x208>;
-			#clock-cells = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
deleted file mode 100644
index b68686f0643b0..0000000000000
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ /dev/null
@@ -1,691 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/clock/dm816.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-/ {
-	compatible = "ti,dm816";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the dm816x interconnect.
-	 * The real dm816x interconnect network is quite complex. Since
-	 * it will not bring real advantage to represent that in DT
-	 * for the moment, just use a fake OCP bus entry to represent
-	 * the whole bus hierarchy.
-	 */
-	ocp {
-		compatible = "simple-bus";
-		reg = <0x44000000 0x10000>;
-		interrupts = <9 10>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		prcm: prcm@48180000 {
-			compatible = "ti,dm816-prcm", "simple-bus";
-			reg = <0x48180000 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48180000 0x4000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prcm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@48140000 {
-			compatible = "ti,dm816-scrm", "simple-bus";
-			reg = <0x48140000 0x21000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#pinctrl-cells = <1>;
-			ranges = <0 0x48140000 0x21000>;
-
-			dm816x_pinmux: pinmux@800 {
-				compatible = "pinctrl-single";
-				reg = <0x800 0x50a>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#pinctrl-cells = <1>;
-				pinctrl-single,register-width = <16>;
-				pinctrl-single,function-mask = <0xf>;
-			};
-
-			/* Device Configuration Registers */
-			scm_conf: syscon@600 {
-				compatible = "syscon", "simple-bus";
-				reg = <0x600 0x110>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x600 0x110>;
-
-				usb_phy0: usb-phy@20 {
-					compatible = "ti,dm8168-usb-phy";
-					reg = <0x20 0x8>;
-					reg-names = "phy";
-					clocks = <&main_fapll 6>;
-					clock-names = "refclk";
-					#phy-cells = <0>;
-					syscon = <&scm_conf>;
-				};
-
-				usb_phy1: usb-phy@28 {
-					compatible = "ti,dm8168-usb-phy";
-					reg = <0x28 0x8>;
-					reg-names = "phy";
-					clocks = <&main_fapll 6>;
-					clock-names = "refclk";
-					#phy-cells = <0>;
-					syscon = <&scm_conf>;
-				};
-			};
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		target-module@49000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49000000 0x4>;
-			reg-names = "rev";
-			clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49000000 0x10000>;
-
-			edma: dma@0 {
-				compatible = "ti,edma3-tpcc";
-				reg = <0 0x10000>;
-				reg-names = "edma3_cc";
-				interrupts = <12 13 14>;
-				interrupt-names = "edma3_ccint", "edma3_mperr",
-						  "edma3_ccerrint";
-				dma-requests = <64>;
-				#dma-cells = <2>;
-
-				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-					   <&edma_tptc2 3>, <&edma_tptc3 0>;
-
-				ti,edma-memcpy-channels = <20 21>;
-			};
-		};
-
-		target-module@49800000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49800000 0x4>,
-			      <0x49800010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49800000 0x100000>;
-
-			edma_tptc0: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <112>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@49900000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49900000 0x4>,
-			      <0x49900010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49900000 0x100000>;
-
-			edma_tptc1: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <113>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@49a00000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49a00000 0x4>,
-			      <0x49a00010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49a00000 0x100000>;
-
-			edma_tptc2: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <114>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@49b00000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x49b00000 0x4>,
-			      <0x49b00010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49b00000 0x100000>;
-
-			edma_tptc3: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <115>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		elm: elm@48080000 {
-			compatible = "ti,am3352-elm";
-			ti,hwmods = "elm";
-			reg = <0x48080000 0x2000>;
-			interrupts = <4>;
-		};
-
-		gpio1: gpio@48032000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			reg = <0x48032000 0x1000>;
-			interrupts = <96>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@4804c000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio2";
-			ti,gpio-always-on;
-			reg = <0x4804c000 0x1000>;
-			interrupts = <98>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			reg = <0x50000000 0x2000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <100>;
-			dmas = <&edma 52 0>;
-			dma-names = "rxtx";
-			gpmc,num-cs = <6>;
-			gpmc,num-waitpins = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		i2c1: i2c@48028000 {
-			compatible = "ti,omap4-i2c";
-			ti,hwmods = "i2c1";
-			reg = <0x48028000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <70>;
-		};
-
-		i2c2: i2c@4802a000 {
-			compatible = "ti,omap4-i2c";
-			ti,hwmods = "i2c2";
-			reg = <0x4802a000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <71>;
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,dm816-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		rtc: rtc@480c0000 {
-			compatible = "ti,am3352-rtc", "ti,da830-rtc";
-			reg = <0x480c0000 0x1000>;
-			interrupts = <75 76>;
-			ti,hwmods = "rtc";
-		};
-
-		mailbox: mailbox@480c8000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x480c8000 0x2000>;
-			interrupts = <77>;
-			ti,hwmods = "mailbox";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			mbox_dsp: mbox-dsp {
-				ti,mbox-tx = <3 0 0>;
-				ti,mbox-rx = <0 0 0>;
-			};
-		};
-
-		spinbox: spinbox@480ca000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x480ca000 0x2000>;
-			ti,hwmods = "spinbox";
-			#hwlock-cells = <1>;
-		};
-
-		mdio: mdio@4a100800 {
-			compatible = "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4a100800 0x100>;
-			ti,hwmods = "davinci_mdio";
-			bus_freq = <1000000>;
-			phy0: ethernet-phy@0 {
-				reg = <1>;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <2>;
-			};
-		};
-
-		eth0: ethernet@4a100000 {
-			compatible = "ti,dm816-emac";
-			ti,hwmods = "emac0";
-			reg = <0x4a100000 0x800
-			       0x4a100900 0x3700>;
-			clocks = <&sysclk24_ck>;
-			syscon = <&scm_conf>;
-			ti,davinci-ctrl-reg-offset = <0>;
-			ti,davinci-ctrl-mod-reg-offset = <0x900>;
-			ti,davinci-ctrl-ram-offset = <0x2000>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			interrupts = <40 41 42 43>;
-			phy-handle = <&phy0>;
-		};
-
-		eth1: ethernet@4a120000 {
-			compatible = "ti,dm816-emac";
-			ti,hwmods = "emac1";
-			reg = <0x4a120000 0x4000>;
-			clocks = <&sysclk24_ck>;
-			syscon = <&scm_conf>;
-			ti,davinci-ctrl-reg-offset = <0>;
-			ti,davinci-ctrl-mod-reg-offset = <0x900>;
-			ti,davinci-ctrl-ram-offset = <0x2000>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			interrupts = <44 45 46 47>;
-			phy-handle = <&phy1>;
-		};
-
-		sata: sata@4a140000 {
-			compatible = "ti,dm816-ahci";
-			reg = <0x4a140000 0x10000>;
-			interrupts = <16>;
-			ti,hwmods = "sata";
-		};
-
-		mcspi1: spi@48030000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x48030000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <65>;
-			ti,spi-num-cs = <4>;
-			ti,hwmods = "mcspi1";
-			dmas = <&edma 16 0 &edma 17 0
-				&edma 18 0 &edma 19 0
-				&edma 20 0 &edma 21 0
-				&edma 22 0 &edma 23 0>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mmc1: mmc@48060000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x48060000 0x11000>;
-			ti,hwmods = "mmc1";
-			interrupts = <64>;
-			dmas = <&edma 24 0 &edma 25 0>;
-			dma-names = "tx", "rx";
-		};
-
-		timer1_target: target-module@4802e000 {
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x4802e000 0x4>,
-			      <0x4802e010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4802e000 0x1000>;
-
-			timer1: timer@0 {
-				compatible = "ti,dm816-timer";
-				reg = <0 0x1000>;
-				interrupts = <67>;
-				ti,timer-alwon;
-				clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
-				clock-names = "fck";
-			};
-		};
-
-		timer2_target: target-module@48040000 {
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x48040000 0x4>,
-			      <0x48040010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48040000 0x1000>;
-
-			timer2: timer@0 {
-				compatible = "ti,dm816-timer";
-				reg = <0 0x1000>;
-				interrupts = <68>;
-				clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
-				clock-names = "fck";
-			};
-		};
-
-		timer3: timer@48042000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48042000 0x2000>;
-			interrupts = <69>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48044000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48044000 0x2000>;
-			interrupts = <92>;
-			ti,hwmods = "timer4";
-			ti,timer-pwm;
-		};
-
-		timer5: timer@48046000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48046000 0x2000>;
-			interrupts = <93>;
-			ti,hwmods = "timer5";
-			ti,timer-pwm;
-		};
-
-		timer6: timer@48048000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48048000 0x2000>;
-			interrupts = <94>;
-			ti,hwmods = "timer6";
-			ti,timer-pwm;
-		};
-
-		timer7: timer@4804a000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x4804a000 0x2000>;
-			interrupts = <95>;
-			ti,hwmods = "timer7";
-			ti,timer-pwm;
-		};
-
-		uart1: serial@48020000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart1";
-			reg = <0x48020000 0x2000>;
-			clock-frequency = <48000000>;
-			interrupts = <72>;
-			dmas = <&edma 26 0 &edma 27 0>;
-			dma-names = "tx", "rx";
-		};
-
-		uart2: serial@48022000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart2";
-			reg = <0x48022000 0x2000>;
-			clock-frequency = <48000000>;
-			interrupts = <73>;
-			dmas = <&edma 28 0 &edma 29 0>;
-			dma-names = "tx", "rx";
-		};
-
-		uart3: serial@48024000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart3";
-			reg = <0x48024000 0x2000>;
-			clock-frequency = <48000000>;
-			interrupts = <74>;
-			dmas = <&edma 30 0 &edma 31 0>;
-			dma-names = "tx", "rx";
-		};
-
-		/* NOTE: USB needs a transceiver driver for phys to work */
-		usb: usb_otg_hs@47401000 {
-			compatible = "ti,am33xx-usb";
-			reg = <0x47401000 0x400000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "usb_otg_hs";
-
-			usb0: usb@47401000 {
-				compatible = "ti,musb-dm816";
-				reg = <0x47401400 0x400
-				       0x47401000 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <18>;
-				interrupt-names = "mc";
-				dr_mode = "host";
-				interface-type = <0>;
-				phys = <&usb_phy0>;
-				phy-names = "usb2-phy";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-
-				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
-					&cppi41dma  2 0 &cppi41dma  3 0
-					&cppi41dma  4 0 &cppi41dma  5 0
-					&cppi41dma  6 0 &cppi41dma  7 0
-					&cppi41dma  8 0 &cppi41dma  9 0
-					&cppi41dma 10 0 &cppi41dma 11 0
-					&cppi41dma 12 0 &cppi41dma 13 0
-					&cppi41dma 14 0 &cppi41dma  0 1
-					&cppi41dma  1 1 &cppi41dma  2 1
-					&cppi41dma  3 1 &cppi41dma  4 1
-					&cppi41dma  5 1 &cppi41dma  6 1
-					&cppi41dma  7 1 &cppi41dma  8 1
-					&cppi41dma  9 1 &cppi41dma 10 1
-					&cppi41dma 11 1 &cppi41dma 12 1
-					&cppi41dma 13 1 &cppi41dma 14 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			usb1: usb@47401800 {
-				compatible = "ti,musb-dm816";
-				reg = <0x47401c00 0x400
-				       0x47401800 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <19>;
-				interrupt-names = "mc";
-				dr_mode = "host";
-				interface-type = <0>;
-				phys = <&usb_phy1>;
-				phy-names = "usb2-phy";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-
-				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
-					&cppi41dma 17 0 &cppi41dma 18 0
-					&cppi41dma 19 0 &cppi41dma 20 0
-					&cppi41dma 21 0 &cppi41dma 22 0
-					&cppi41dma 23 0 &cppi41dma 24 0
-					&cppi41dma 25 0 &cppi41dma 26 0
-					&cppi41dma 27 0 &cppi41dma 28 0
-					&cppi41dma 29 0 &cppi41dma 15 1
-					&cppi41dma 16 1 &cppi41dma 17 1
-					&cppi41dma 18 1 &cppi41dma 19 1
-					&cppi41dma 20 1 &cppi41dma 21 1
-					&cppi41dma 22 1 &cppi41dma 23 1
-					&cppi41dma 24 1 &cppi41dma 25 1
-					&cppi41dma 26 1 &cppi41dma 27 1
-					&cppi41dma 28 1 &cppi41dma 29 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			cppi41dma: dma-controller@47402000 {
-				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
-				reg-names = "glue", "controller", "scheduler", "queuemgr";
-				interrupts = <17>;
-				interrupt-names = "glue";
-				#dma-cells = <2>;
-				/* For backwards compatibility: */
-				#dma-channels = <30>;
-				dma-channels = <30>;
-				#dma-requests = <256>;
-				dma-requests = <256>;
-			};
-		};
-
-		wd_timer2: wd_timer@480c2000 {
-			compatible = "ti,omap3-wdt";
-			ti,hwmods = "wd_timer";
-			reg = <0x480c2000 0x1000>;
-			interrupts = <0>;
-		};
-	};
-};
-
-#include "dm816x-clocks.dtsi"
-
-/* Preferred always-on timer for clocksource */
-&timer1_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&timer1_fck>;
-		assigned-clock-parents = <&sys_clkin_ck>;
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&timer2_fck>;
-		assigned-clock-parents = <&sys_clkin_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi
deleted file mode 100644
index 1082fdfbfe60d..0000000000000
--- a/arch/arm/boot/dts/dove-cm-a510.dtsi
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Device Tree include for Compulab CM-A510 System-on-Module
- *
- * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; version 2 of the
- *     License.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * The CM-A510 comes with several optional components:
- *
- * Memory options:
- *  D512: 512M
- *  D1024: 1G
- *
- * NAND options:
- *  N512: 512M NAND
- *
- * Ethernet options:
- *  E1: PHY RTL8211D on internal GbE (SMI address 0x03)
- *  E2: Additional ethernet NIC RTL8111D on PCIe1
- *
- * Audio options:
- *  A: TI TLV320AIC23b audio codec (I2C address 0x1a)
- *
- * Touchscreen options:
- *  I: TI TSC2046 touchscreen controller (on SPI1)
- *
- * USB options:
- *  U2: 2 dual-role USB2.0 ports
- *  U4: 2 additional USB2.0 host ports (via USB1)
- *
- * WiFi options:
- *  W: Broadcom BCM4319 802.11b/g/n (USI WM-N-BM-01 on SDIO1)
- *
- * GPIOs used on CM-A510:
- *   1 GbE PHY reset (active low)
- *   3 WakeUp
- *   8 PowerOff (active low)
- *  13 Touchscreen pen irq (active low)
- *  65 System LED (active high)
- *  69 USB Hub reset (active low)
- *  70 WLAN reset (active low)
- *  71 WLAN regulator (active high)
- */
-
-#include "dove.dtsi"
-
-/ {
-	model = "Compulab CM-A510";
-	compatible = "compulab,cm-a510", "marvell,dove";
-
-	/*
-	 * Set the minimum memory size here and let the
-	 * bootloader set the real size.
-	 */
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		/* Set upper NAND data bit to GPO */
-		pinctrl-0 = <&pmx_nand_gpo>;
-		pinctrl-names = "default";
-
-		led-system {
-			label = "cm-a510:system:green";
-			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wifi_power: regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "WiFi Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-/* Optional RTL8211D GbE PHY on SMI address 0x03 */
-&mdio {
-	ethphy: ethernet-phy@3 {
-		reg = <3>;
-		status = "disabled";
-	};
-};
-
-&eth {
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c0 {
-	/* Optional TI TLV320AIC23b audio codec */
-	opt_audio: audio@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-		status = "disabled";
-	};
-};
-
-/* Optional RTL8111D GbE NIC on PCIe1 */
-&pcie { status = "disabled"; };
-
-&pcie1 {
-	pinctrl-0 = <&pmx_pcie1_clkreq>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&pinctrl {
-	pmx_uart2: pmx-uart2 {
-		marvell,pins = "mpp14", "mpp15";
-		marvell,function = "uart2";
-	};
-};
-
-/* Optional Broadcom BCM4319 802.11b/g/n WiFi module */
-&sdio1 {
-	non-removable;
-	vmmc-supply = <&wifi_power>;
-	reset-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&spi0 {
-	status = "okay";
-
-	/* 1M Flash Winbond W25Q80BL */
-	flash@0 {
-		compatible = "winbond,w25q80";
-		spi-max-frequency = <80000000>;
-		reg = <0>;
-	};
-};
-
-&spi1 {
-	pinctrl-0 = <&pmx_spi1_20_23>;
-	pinctrl-names = "default";
-	status = "disabled";
-
-	/* Optional TI TSC2046 touchscreen controller */
-	opt_touch: touchscreen@0 {
-		compatible = "ti,tsc2046";
-		spi-max-frequency = <2500000>;
-		reg = <0>;
-		pinctrl-0 = <&pmx_gpio_13>;
-		pinctrl-names = "default";
-		interrupts-extended = <&gpio0 13 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&uart2 {
-	pinctrl-0 = <&pmx_uart2>;
-	pinctrl-names = "default";
-};
diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/dove-cubox-es.dts
deleted file mode 100644
index ad361ec1361de..0000000000000
--- a/arch/arm/boot/dts/dove-cubox-es.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "dove-cubox.dts"
-
-/ {
-	model = "SolidRun CuBox (Engineering Sample)";
-	compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove";
-};
-
-&sdio0 {
-	/* sdio0 card detect is connected to wrong pin on CuBox ES */
-	cd-gpios = <&gpio0 12 1>;
-	pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
-};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
deleted file mode 100644
index dbba0c8cdab1a..0000000000000
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "SolidRun CuBox";
-	compatible = "solidrun,cubox", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_18>;
-		pinctrl-names = "default";
-
-		led-power {
-			label = "Power";
-			gpios = <&gpio0 18 1>;
-			default-state = "keep";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 1 0>;
-			pinctrl-0 = <&pmx_gpio_1>;
-			pinctrl-names = "default";
-		};
-	};
-
-	clocks {
-		/* 25MHz reference crystal */
-		ref25: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 19 1>;
-		pinctrl-0 = <&pmx_gpio_19>;
-		pinctrl-names = "default";
-	};
-
-	gpu-subsystem {
-		status = "okay";
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&mdio { status = "okay"; };
-&eth {
-	status = "okay";
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&mdio {
-	ethphy: ethernet-phy@1 {
-		compatible = "marvell,88e1310";
-		reg = <1>;
-	};
-};
-
-&gpu {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-
-	si5351: clock-generator@60 {
-		compatible = "silabs,si5351a-msop";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#clock-cells = <1>;
-
-		/* connect xtal input to 25MHz reference */
-		clocks = <&ref25>;
-		clock-names = "xtal";
-
-		/* connect xtal input as source of pll0 and pll1 */
-		silabs,pll-source = <0 0>, <1 0>;
-
-		clkout0 {
-			reg = <0>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <0>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-		};
-
-		clkout2 {
-			reg = <2>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <1>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-		};
-	};
-};
-
-&sdio0 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash Winbond W25Q32BV */
-	flash@0 {
-		compatible = "st,w25q32";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&audio1 {
-	status = "okay";
-	clocks = <&gate_clk 13>, <&si5351 2>;
-	clock-names = "internal", "extclk";
-	pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>;
-	pinctrl-names = "default";
-};
diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts
deleted file mode 100644
index 79ee2b32409d5..0000000000000
--- a/arch/arm/boot/dts/dove-d2plug.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Globalscale D2Plug";
-	compatible = "globalscale,d2plug", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
-		pinctrl-names = "default";
-
-		led-wlan-ap {
-			label = "wlan-ap";
-			gpios = <&gpio0 0 1>;
-		};
-
-		led-wlan-act {
-			label = "wlan-act";
-			gpios = <&gpio0 1 1>;
-		};
-
-		led-bluetooth-act {
-			label = "bt-act";
-			gpios = <&gpio0 2 1>;
-		};
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
-&mdio { status = "okay"; };
-&eth { status = "okay"; };
-
-/* Samsung M8G2F eMMC */
-&sdio0 {
-	status = "okay";
-	non-removable;
-	bus-width = <4>;
-};
-
-/* Marvell SD8787 WLAN/BT */
-&sdio1 {
-	status = "okay";
-	non-removable;
-	bus-width = <4>;
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash Macronix MX25L3205D */
-	flash@0 {
-		compatible = "st,m25l3205d";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
deleted file mode 100644
index 5aa5d4a7d51d7..0000000000000
--- a/arch/arm/boot/dts/dove-d3plug.dts
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Globalscale D3Plug";
-	compatible = "globalscale,d3plug", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
-		pinctrl-names = "default";
-
-		led-wlan-act {
-			label = "wlan-act";
-			gpios = <&gpio0 0 1>;
-		};
-
-		led-wlan-ap {
-			label = "wlan-ap";
-			gpios = <&gpio0 1 1>;
-		};
-
-		led-status {
-			label = "status";
-			gpios = <&gpio0 2 1>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 8 0>;
-			pinctrl-0 = <&pmx_gpio_8>;
-			pinctrl-names = "default";
-		};
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
-
-/* Samsung M8G2F eMMC */
-&sdio0 {
-	status = "okay";
-	non-removable;
-	bus-width = <4>;
-};
-
-/* Marvell SD8787 WLAN/BT */
-&sdio1 {
-	status = "okay";
-	non-removable;
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 2M Flash Macronix MX25L1605D */
-	flash@0 {
-		compatible = "st,m25l1605d";
-		spi-max-frequency = <86000000>;
-		reg = <0>;
-	};
-};
-
-&pcie {
-	status = "okay";
-	/* Fresco Logic USB3.0 xHCI controller */
-	pcie@1 {
-		status = "okay";
-		reset-gpios = <&gpio0 26 1>;
-		reset-delay-us = <20000>;
-		pinctrl-0 = <&pmx_camera_gpio>;
-		pinctrl-names = "default";
-	};
-	/* Mini-PCIe slot */
-	pcie@2 {
-		status = "okay";
-		reset-gpios = <&gpio0 25 1>;
-	};
-};
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts
deleted file mode 100644
index c1912dc6bfc35..0000000000000
--- a/arch/arm/boot/dts/dove-dove-db.dts
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Marvell DB-MV88AP510-BP Development Board";
-	compatible = "marvell,dove-db", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-};
-
-&uart0 { status = "okay"; };
-&uart1 { status = "okay"; };
-&sdio0 { status = "okay"; };
-&sdio1 { status = "okay"; };
-&sata0 { status = "okay"; };
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
-	flash@0 {
-		compatible = "st,m25p32";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&i2c0 {
-	  status = "okay";
-};
diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/dove-sbc-a510.dts
deleted file mode 100644
index df021f9b01176..0000000000000
--- a/arch/arm/boot/dts/dove-sbc-a510.dts
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Device Tree file for Compulab SBC-A510 Single Board Computer
- *
- * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; version 2 of the
- *     License.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * SBC-A510 comprises a PCA9555 I2C GPIO expander its GPIO lines connected to
- *
- * 0.0 USB0 VBUS_EN (active high)
- * 0.1 USB0 VBUS_GOOD
- * 0.2 DVI transmitter TI TFP410 MSEN
- * 0.3 DVI transmitter TI TFP410 PD# (active low power down)
- * 0.4 LVDS transmitter DS90C365 PD# (active low power down)
- * 0.5 LCD nRST (active low reset)
- * 0.6 PCIe0 nRST (active low reset)
- * 0.7 mini-PCIe slot W_DISABLE#
- *
- * 1.0 MMC WP
- * 1.1 Camera Input FPC FLASH_STB and P21.5
- * 1.2 Camera Input FPC WE        and P21.22
- * 1.3 MMC VCC_EN (active high)   and P21.7
- * 1.4 Camera Input FPC AFTR_RST  and P21.17
- * 1.5 Camera Input FPC OE        and P21.19
- * 1.6 Camera Input FPC SNPSHT    and P21.6
- * 1.7 Camera Input FPC SHTR      and P21.10
- */
-
-/dts-v1/;
-
-#include "dove-cm-a510.dtsi"
-
-/ {
-	model = "Compulab SBC-A510";
-	compatible = "compulab,sbc-a510", "compulab,cm-a510", "marvell,dove";
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	regulators {
-		usb0_power: regulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		mmc_power: regulator@3 {
-			compatible = "regulator-fixed";
-			regulator-name = "MMC Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-/* Ethernet0 depends on CM-A510 option E1 */
-&mdio { status = "disabled"; };
-&eth { status = "disabled"; };
-&ethphy { status = "disabled"; };
-
-/*
- * USB port 0 can be powered and monitored by I2C GPIO expander:
- *  VBUS_ENABLE on GPIO0, VBUS_GOOD on GPIO1
- */
-&ehci0 {
-	status = "okay";
-	vbus-supply = <&usb0_power>;
-};
-
-/* USB port 1 (and ports 2, 3 if CM-A510 has U4 option) */
-&ehci1 { status = "okay"; };
-
-/*
- * I2C bus layout:
- * i2c0:
- *  - Audio Codec, 0x1a (option from CM-A510)
- *  - DVI transmitter TI TFP410, 0x39
- *  - HDMI/DVI DDC channel
- * i2c1:
- *  - GPIO expander, NXP PCA9555, 0x20
- *  - VGA DDC channel
- */
-&i2c {
-	pinctrl-0 = <&pmx_i2c1>;
-	pinctrl-names = "default";
-};
-
-&i2c0 {
-	/* TI TFP410 DVI transmitter */
-	dvi: video@39 {
-		compatible = "ti,tfp410";
-		reg = <0x39>;
-		powerdown-gpio = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	/* NXP PCA9555 GPIO expander */
-	gpio_ext: gpio@20 {
-		compatible = "nxp,pca9555";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&pcie { status = "okay"; };
-
-/*
- * PCIe0 can be configured by Jumper E1 to be either connected to
- * a mini-PCIe slot or a Pericom PI7C9X111 PCIe-to-PCI bridge.
- */
-&pcie0 {
-	status = "okay";
-	pinctrl-0 = <&pmx_pcie0_clkreq>;
-	pinctrl-names = "default";
-	reset-gpios = <&gpio_ext 6 GPIO_ACTIVE_LOW>;
-};
-
-/* Ethernet1 depends on CM-A510 option E2 */
-&pcie1 { status = "disabled"; };
-
-/* SATA connector */
-&sata0 { status = "okay"; };
-
-/*
- * SDIO0 is connected to a MMC/SD/SDIO socket, I2C GPIO expander has
- *  VCC_MMC_ENABLE on GPIO13, MMC_WP on GPIO10
- */
-&sdio0 {
-	vmmc-supply = <&mmc_power>;
-	wp-gpios = <&gpio_ext 10 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-/* UART0 on RS232 mini-connector */
-&uart0 { status = "okay"; };
-/* UART2 on pin headers */
-&uart2 { status = "okay"; };
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
deleted file mode 100644
index 062c86361640f..0000000000000
--- a/arch/arm/boot/dts/dove.dtsi
+++ /dev/null
@@ -1,820 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "marvell,dove";
-	model = "Marvell Armada 88AP510 SoC";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "marvell,pj4a", "marvell,sheeva-v7";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-		};
-	};
-
-	l2: l2-cache {
-		compatible = "marvell,tauros2-cache";
-		marvell,tauros2-cache-features = <0>;
-	};
-
-	gpu-subsystem {
-		compatible = "marvell,dove-gpu-subsystem";
-		cores = <&gpu>;
-		status = "disabled";
-	};
-
-	i2c-mux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&i2c>;
-
-		pinctrl-names = "i2c0", "i2c1", "i2c2";
-		pinctrl-0 = <&pmx_i2cmux_0>;
-		pinctrl-1 = <&pmx_i2cmux_1>;
-		pinctrl-2 = <&pmx_i2cmux_2>;
-
-		i2c0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "okay";
-		};
-
-		i2c1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			/* Requires pmx_i2c1 on i2c controller node */
-			status = "disabled";
-		};
-
-		i2c2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			/* Requires pmx_i2c2 on i2c controller node */
-			status = "disabled";
-		};
-	};
-
-	mbus {
-		compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */
-		pcie-io-aperture  = <0xf2000000 0x00200000>; /*   2M I/O space */
-
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000   /* MBUS regs  1M */
-			  MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000   /* AXI  regs 16M */
-			  MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000   /* BootROM  128M */
-			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
-			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
-
-		pcie: pcie {
-			compatible = "marvell,dove-pcie";
-			status = "disabled";
-			device_type = "pci";
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&intc>;
-			bus-range = <0x00 0xff>;
-
-			ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
-			          0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
-				  0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0   /* Port 0.0 Mem */
-				  0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0   /* Port 0.0 I/O */
-				  0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
-				  0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
-
-			pcie0: pcie@1 {
-				device_type = "pci";
-				status = "disabled";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				clocks = <&gate_clk 4>;
-				marvell,pcie-port = <0>;
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-				          0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-
-				#interrupt-cells = <1>;
-				interrupt-names = "intx", "error";
-				interrupts = <16>, <15>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
-						<0 0 0 2 &pcie0_intc 1>,
-						<0 0 0 3 &pcie0_intc 2>,
-						<0 0 0 4 &pcie0_intc 3>;
-
-				pcie0_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie1: pcie@2 {
-				device_type = "pci";
-				status = "disabled";
-				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				clocks = <&gate_clk 5>;
-				marvell,pcie-port = <1>;
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-				          0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-
-				#interrupt-cells = <1>;
-				interrupt-names = "intx", "error";
-				interrupts = <18>, <17>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
-						<0 0 0 2 &pcie1_intc 1>,
-						<0 0 0 3 &pcie1_intc 2>,
-						<0 0 0 4 &pcie1_intc 3>;
-
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000   /* MBUS regs  1M */
-				  0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000   /* AXI  regs 16M */
-				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
-				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
-
-			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <6>;
-				reg = <0x10600 0x28>;
-				clocks = <&core_clk 0>;
-				pinctrl-0 = <&pmx_spi0>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			i2c: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <11>;
-				clock-frequency = <400000>;
-				clocks = <&core_clk 0>;
-				status = "okay";
-			};
-
-			uart0: serial@12000 {
-				compatible = "ns16550a";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <7>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart1: serial@12100 {
-				compatible = "ns16550a";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <8>;
-				clocks = <&core_clk 0>;
-				pinctrl-0 = <&pmx_uart1>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart2: serial@12200 {
-				compatible = "ns16550a";
-				reg = <0x12200 0x100>;
-				reg-shift = <2>;
-				interrupts = <9>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart3: serial@12300 {
-				compatible = "ns16550a";
-				reg = <0x12300 0x100>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@14600 {
-				compatible = "marvell,orion-spi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <5>;
-				reg = <0x14600 0x28>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			mbusc: mbus-ctrl@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x80>, <0x800100 0x8>;
-			};
-
-			sysc: system-ctrl@20000 {
-				compatible = "marvell,orion-system-controller";
-				reg = <0x20000 0x110>;
-			};
-
-			bridge_intc: bridge-interrupt-ctrl@20110 {
-				compatible = "marvell,orion-bridge-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20110 0x8>;
-				interrupts = <0>;
-				marvell,#interrupts = <5>;
-			};
-
-			intc: interrupt-controller@20200 {
-				compatible = "marvell,orion-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20200 0x10>, <0x20210 0x10>;
-			};
-
-			timer: timer@20300 {
-				compatible = "marvell,orion-timer";
-				reg = <0x20300 0x20>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <1>, <2>;
-				clocks = <&core_clk 0>;
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,orion-wdt";
-				reg = <0x20300 0x28>, <0x20108 0x4>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <3>;
-				clocks = <&core_clk 0>;
-			};
-
-			crypto: crypto-engine@30000 {
-				compatible = "marvell,dove-crypto";
-				reg = <0x30000 0x10000>;
-				reg-names = "regs";
-				interrupts = <31>;
-				clocks = <&gate_clk 15>;
-				marvell,crypto-srams = <&crypto_sram>;
-				marvell,crypto-sram-size = <0x800>;
-				status = "okay";
-			};
-
-			ehci0: usb-host@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x1000>;
-				interrupts = <24>;
-				clocks = <&gate_clk 0>;
-				status = "okay";
-			};
-
-			ehci1: usb-host@51000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x51000 0x1000>;
-				interrupts = <25>;
-				clocks = <&gate_clk 1>;
-				status = "okay";
-			};
-
-			xor0: dma-engine@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60a00 0x100>;
-				clocks = <&gate_clk 23>;
-				status = "okay";
-
-				channel0 {
-					interrupts = <39>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-
-				channel1 {
-					interrupts = <40>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-			};
-
-			xor1: dma-engine@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gate_clk 24>;
-				status = "okay";
-
-				channel0 {
-					interrupts = <42>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-
-				channel1 {
-					interrupts = <43>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-			};
-
-			sdio1: sdio-host@90000 {
-				compatible = "marvell,dove-sdhci";
-				reg = <0x90000 0x100>;
-				interrupts = <36>, <38>;
-				clocks = <&gate_clk 9>;
-				pinctrl-0 = <&pmx_sdio1>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			eth: ethernet-ctrl@72000 {
-				compatible = "marvell,orion-eth";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72000 0x4000>;
-				clocks = <&gate_clk 2>;
-				marvell,tx-checksum-limit = <1600>;
-				status = "disabled";
-
-				ethernet-port@0 {
-					compatible = "marvell,orion-eth-port";
-					reg = <0>;
-					interrupts = <29>;
-					/* overwrite MAC address in bootloader */
-					local-mac-address = [00 00 00 00 00 00];
-				};
-			};
-
-			mdio: mdio-bus@72004 {
-				compatible = "marvell,orion-mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72004 0x84>;
-				interrupts = <30>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-
-			sdio0: sdio-host@92000 {
-				compatible = "marvell,dove-sdhci";
-				reg = <0x92000 0x100>;
-				interrupts = <35>, <37>;
-				clocks = <&gate_clk 8>;
-				pinctrl-0 = <&pmx_sdio0>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			sata0: sata-host@a0000 {
-				compatible = "marvell,orion-sata";
-				reg = <0xa0000 0x2400>;
-				interrupts = <62>;
-				clocks = <&gate_clk 3>;
-				phys = <&sata_phy0>;
-				phy-names = "port0";
-				nr-ports = <1>;
-				status = "disabled";
-			};
-
-			sata_phy0: sata-phy@a2000 {
-				compatible = "marvell,mvebu-sata-phy";
-				reg = <0xa2000 0x0334>;
-				clocks = <&gate_clk 3>;
-				clock-names = "sata";
-				#phy-cells = <0>;
-				status = "okay";
-			};
-
-			audio0: audio-controller@b0000 {
-				compatible = "marvell,dove-audio";
-				reg = <0xb0000 0x2210>;
-				interrupts = <19>, <20>;
-				clocks = <&gate_clk 12>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			audio1: audio-controller@b4000 {
-				compatible = "marvell,dove-audio";
-				reg = <0xb4000 0x2210>;
-				interrupts = <21>, <22>;
-				clocks = <&gate_clk 13>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			pmu: power-management@d0000 {
-				compatible = "marvell,dove-pmu", "simple-bus";
-				reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
-				ranges = <0x00000000 0x000d0000 0x8000
-					  0x00008000 0x000d8000 0x8000>;
-				interrupts = <33>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#interrupt-cells = <1>;
-				#reset-cells = <1>;
-
-				domains {
-					vpu_domain: vpu-domain {
-						#power-domain-cells = <0>;
-						marvell,pmu_pwr_mask = <0x00000008>;
-						marvell,pmu_iso_mask = <0x00000001>;
-						resets = <&pmu 16>;
-					};
-
-					gpu_domain: gpu-domain {
-						#power-domain-cells = <0>;
-						marvell,pmu_pwr_mask = <0x00000004>;
-						marvell,pmu_iso_mask = <0x00000002>;
-						resets = <&pmu 18>;
-					};
-				};
-
-				thermal: thermal-diode@1c {
-					compatible = "marvell,dove-thermal";
-					reg = <0x001c 0x0c>, <0x005c 0x08>;
-				};
-
-				gate_clk: clock-gating-ctrl@38 {
-					compatible = "marvell,dove-gating-clock";
-					reg = <0x0038 0x4>;
-					clocks = <&core_clk 0>;
-					#clock-cells = <1>;
-				};
-
-				divider_clk: core-clock@64 {
-					compatible = "marvell,dove-divider-clock";
-					reg = <0x0064 0x8>;
-					#clock-cells = <1>;
-				};
-
-				pinctrl: pin-ctrl@200 {
-					compatible = "marvell,dove-pinctrl";
-					reg = <0x0200 0x14>,
-					      <0x0440 0x04>;
-					clocks = <&gate_clk 22>;
-
-					pmx_gpio_0: pmx-gpio-0 {
-						marvell,pins = "mpp0";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_1: pmx-gpio-1 {
-						marvell,pins = "mpp1";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_2: pmx-gpio-2 {
-						marvell,pins = "mpp2";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_3: pmx-gpio-3 {
-						marvell,pins = "mpp3";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_4: pmx-gpio-4 {
-						marvell,pins = "mpp4";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_5: pmx-gpio-5 {
-						marvell,pins = "mpp5";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_6: pmx-gpio-6 {
-						marvell,pins = "mpp6";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_7: pmx-gpio-7 {
-						marvell,pins = "mpp7";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_8: pmx-gpio-8 {
-						marvell,pins = "mpp8";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_9: pmx-gpio-9 {
-						marvell,pins = "mpp9";
-						marvell,function = "gpio";
-					};
-
-					pmx_pcie1_clkreq: pmx-pcie1-clkreq {
-						marvell,pins = "mpp9";
-						marvell,function = "pex1";
-					};
-
-					pmx_gpio_10: pmx-gpio-10 {
-						marvell,pins = "mpp10";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_11: pmx-gpio-11 {
-						marvell,pins = "mpp11";
-						marvell,function = "gpio";
-					};
-
-					pmx_pcie0_clkreq: pmx-pcie0-clkreq {
-						marvell,pins = "mpp11";
-						marvell,function = "pex0";
-					};
-
-					pmx_gpio_12: pmx-gpio-12 {
-						marvell,pins = "mpp12";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_13: pmx-gpio-13 {
-						marvell,pins = "mpp13";
-						marvell,function = "gpio";
-					};
-
-					pmx_audio1_extclk: pmx-audio1-extclk {
-						marvell,pins = "mpp13";
-						marvell,function = "audio1";
-					};
-
-					pmx_gpio_14: pmx-gpio-14 {
-						marvell,pins = "mpp14";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_15: pmx-gpio-15 {
-						marvell,pins = "mpp15";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_16: pmx-gpio-16 {
-						marvell,pins = "mpp16";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_17: pmx-gpio-17 {
-						marvell,pins = "mpp17";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_18: pmx-gpio-18 {
-						marvell,pins = "mpp18";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_19: pmx-gpio-19 {
-						marvell,pins = "mpp19";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_20: pmx-gpio-20 {
-						marvell,pins = "mpp20";
-						marvell,function = "gpio";
-					};
-
-					pmx_gpio_21: pmx-gpio-21 {
-						marvell,pins = "mpp21";
-						marvell,function = "gpio";
-					};
-
-					pmx_camera: pmx-camera {
-						marvell,pins = "mpp_camera";
-						marvell,function = "camera";
-					};
-
-					pmx_camera_gpio: pmx-camera-gpio {
-						marvell,pins = "mpp_camera";
-						marvell,function = "gpio";
-					};
-
-					pmx_sdio0: pmx-sdio0 {
-						marvell,pins = "mpp_sdio0";
-						marvell,function = "sdio0";
-					};
-
-					pmx_sdio0_gpio: pmx-sdio0-gpio {
-						marvell,pins = "mpp_sdio0";
-						marvell,function = "gpio";
-					};
-
-					pmx_sdio1: pmx-sdio1 {
-						marvell,pins = "mpp_sdio1";
-						marvell,function = "sdio1";
-					};
-
-					pmx_sdio1_gpio: pmx-sdio1-gpio {
-						marvell,pins = "mpp_sdio1";
-						marvell,function = "gpio";
-					};
-
-					pmx_audio1_gpio: pmx-audio1-gpio {
-						marvell,pins = "mpp_audio1";
-						marvell,function = "gpio";
-					};
-
-					pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
-						marvell,pins = "mpp_audio1";
-						marvell,function = "i2s1/spdifo";
-					};
-
-					pmx_spi0: pmx-spi0 {
-						marvell,pins = "mpp_spi0";
-						marvell,function = "spi0";
-					};
-
-					pmx_spi0_gpio: pmx-spi0-gpio {
-						marvell,pins = "mpp_spi0";
-						marvell,function = "gpio";
-					};
-
-					pmx_spi1_4_7: pmx-spi1-4-7 {
-						marvell,pins = "mpp4", "mpp5",
-							"mpp6", "mpp7";
-						marvell,function = "spi1";
-					};
-
-					pmx_spi1_20_23: pmx-spi1-20-23 {
-						marvell,pins = "mpp20", "mpp21",
-							"mpp22", "mpp23";
-						marvell,function = "spi1";
-					};
-
-					pmx_uart1: pmx-uart1 {
-						marvell,pins = "mpp_uart1";
-						marvell,function = "uart1";
-					};
-
-					pmx_uart1_gpio: pmx-uart1-gpio {
-						marvell,pins = "mpp_uart1";
-						marvell,function = "gpio";
-					};
-
-					pmx_nand: pmx-nand {
-						marvell,pins = "mpp_nand";
-						marvell,function = "nand";
-					};
-
-					pmx_nand_gpo: pmx-nand-gpo {
-						marvell,pins = "mpp_nand";
-						marvell,function = "gpo";
-					};
-
-					pmx_i2c1: pmx-i2c1 {
-						marvell,pins = "mpp17", "mpp19";
-						marvell,function = "twsi";
-					};
-
-					pmx_i2c2: pmx-i2c2 {
-						marvell,pins = "mpp_audio1";
-						marvell,function = "twsi";
-					};
-
-					pmx_ssp_i2c2: pmx-ssp-i2c2 {
-						marvell,pins = "mpp_audio1";
-						marvell,function = "ssp/twsi";
-					};
-
-					pmx_i2cmux_0: pmx-i2cmux-0 {
-						marvell,pins = "twsi";
-						marvell,function = "twsi-opt1";
-					};
-
-					pmx_i2cmux_1: pmx-i2cmux-1 {
-						marvell,pins = "twsi";
-						marvell,function = "twsi-opt2";
-					};
-
-					pmx_i2cmux_2: pmx-i2cmux-2 {
-						marvell,pins = "twsi";
-						marvell,function = "twsi-opt3";
-					};
-				};
-
-				core_clk: core-clocks@214 {
-					compatible = "marvell,dove-core-clock";
-					reg = <0x0214 0x4>;
-					#clock-cells = <1>;
-				};
-
-				gpio0: gpio-ctrl@400 {
-					compatible = "marvell,orion-gpio";
-					#gpio-cells = <2>;
-					gpio-controller;
-					reg = <0x0400 0x20>;
-					ngpios = <32>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupt-parent = <&intc>;
-					interrupts = <12>, <13>, <14>, <60>;
-				};
-
-				gpio1: gpio-ctrl@420 {
-					compatible = "marvell,orion-gpio";
-					#gpio-cells = <2>;
-					gpio-controller;
-					reg = <0x0420 0x20>;
-					ngpios = <32>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupt-parent = <&intc>;
-					interrupts = <61>;
-				};
-
-				rtc: real-time-clock@8500 {
-					compatible = "marvell,orion-rtc";
-					reg = <0x8500 0x20>;
-					interrupts = <5>;
-				};
-			};
-
-			gconf: global-config@e802c {
-				compatible = "marvell,dove-global-config",
-				             "syscon";
-				reg = <0xe802c 0x14>;
-			};
-
-			gpio2: gpio-ctrl@e8400 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xe8400 0x0c>;
-				ngpios = <8>;
-			};
-
-			lcd1: lcd-controller@810000 {
-				compatible = "marvell,dove-lcd";
-				reg = <0x810000 0x1000>;
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			lcd0: lcd-controller@820000 {
-				compatible = "marvell,dove-lcd";
-				reg = <0x820000 0x1000>;
-				interrupts = <47>;
-				status = "disabled";
-			};
-
-			crypto_sram: sram@ffffe000 {
-				compatible = "mmio-sram";
-				reg = <0xffffe000 0x800>;
-				clocks = <&gate_clk 15>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-			};
-
-			gpu: gpu@840000 {
-				clocks = <&divider_clk 1>;
-				clock-names = "core";
-				compatible = "vivante,gc";
-				interrupts = <48>;
-				power-domains = <&gpu_domain>;
-				reg = <0x840000 0x4000>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dra62x-clocks.dtsi b/arch/arm/boot/dts/dra62x-clocks.dtsi
deleted file mode 100644
index 11d1241b0e13a..0000000000000
--- a/arch/arm/boot/dts/dra62x-clocks.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include "dm814x-clocks.dtsi"
-
-/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */
-&adpll_hdvic_ck {
-	status = "disabled";
-};
-
-&adpll_l3_ck {
-	status = "disabled";
-};
-
-&adpll_dss_ck {
-	status = "disabled";
-};
-
-/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */
-&sysclk4_ck {
-	clocks = <&adpll_isp_ck 1>;
-};
-
-&sysclk5_ck {
-	clocks = <&adpll_isp_ck 1>;
-};
-
-&sysclk6_ck {
-	clocks = <&adpll_isp_ck 1>;
-};
-
-/*
- * Compared to dm814x, dra62x has different shifts and more mux options.
- * Please add the extra options for ysclk_14 and 16 if really needed.
- */
-&timer1_fck {
-	clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
-		  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
-	ti,bit-shift = <4>;
-};
-
-&timer2_fck {
-	clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
-		  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
-	ti,bit-shift = <8>;
-};
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
deleted file mode 100644
index 577114c4c20a3..0000000000000
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include "dra62x.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "DRA62x J5 Eco EVM";
-	compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148", "ti,dm814";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;	/* 1 GB */
-	};
-
-	/* MIC94060YC6 controlled by SD1_POW pin */
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&cpsw_emac0 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-id";
-};
-
-&cpsw_emac1 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-id";
-};
-
-&davinci_mdio {
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>; /* termcount */
-		linux,mtd-name = "micron,mt29f2g16aadwp";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ti,nand-ecc-opt = "bch8";
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		partition@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1c0000>;
-		};
-		partition@1c0000 {
-			label = "Environment";
-			reg = <0x240000 0x40000>;
-		};
-		partition@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x500000>;
-		};
-		partition@780000 {
-			label = "Filesystem";
-			reg = <0x780000 0xf880000>;
-		};
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-};
-
-&pincntl {
-	sd1_pins: pinmux_sd1_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
-			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
-			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[0] */
-			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[1] */
-			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[2] */
-			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[3] */
-			DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)	/* SD1_POW */
-			DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)	/* GP1[6] */
-			>;
-	};
-
-	usb0_pins: pinmux_usb0_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
-			>;
-	};
-};
-
-/* USB0_ID pin state: SW10[1] = 0 cable detection, SW10[1] = 1 ID grounded */
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins>;
-	dr_mode = "otg";
-};
-
-&usb1_phy {
-	status = "disabled";
-};
-
-&usb1 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi
deleted file mode 100644
index cfefa670515cc..0000000000000
--- a/arch/arm/boot/dts/dra62x.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include "dm814x.dtsi"
-
-/ {
-	compatible = "ti,dra62x";
-};
-
-/* Compared to dm814x, dra62x has different offsets for Ethernet */
-&mac {
-	reg = <0 0x800>,
-	      <0x1200 0x100>;
-};
-
-&davinci_mdio {
-	reg = <0x1000 0x100>;
-};
-
-#include "dra62x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
deleted file mode 100644
index 747ff0db90c7d..0000000000000
--- a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for DRA7x SoC DSPEVE thermal
- *
- * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-dspeve_thermal: dspeve_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <500>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     3>;
-
-	trips {
-		dspeve_crit: dspeve_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
deleted file mode 100644
index 4cdffd6db7407..0000000000000
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ /dev/null
@@ -1,265 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "dra74-ipu-dsp-common.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/ti-dra7-atl.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	extcon_usb2: extcon_usb2 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	sound0: sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "DRA7xx-EVM";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Line", "Line Out",
-			"Microphone", "Mic Jack",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Headphone Jack",	"HPLOUT",
-			"Headphone Jack",	"HPROUT",
-			"Line Out",		"LLOUT",
-			"Line Out",		"RLOUT",
-			"MIC3L",		"Mic Jack",
-			"MIC3R",		"Mic Jack",
-			"Mic Jack",		"Mic Bias",
-			"LINE1L",		"Line In",
-			"LINE1R",		"Line In";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound0_master>;
-		simple-audio-card,frame-master = <&sound0_master>;
-		simple-audio-card,bitclock-inversion;
-
-		sound0_master: simple-audio-card,cpu {
-			sound-dai = <&mcasp3>;
-			system-clock-frequency = <5644800>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			clocks = <&atl_clkin2_ck>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led0 {
-			label = "dra7:usr1";
-			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led1 {
-			label = "dra7:usr2";
-			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "dra7:usr3";
-			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "dra7:usr4";
-			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		USER1 {
-			label = "btnUser1";
-			linux,code = <BTN_0>;
-			gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
-		};
-
-		USER2 {
-			label = "btnUser2";
-			linux,code = <BTN_1>;
-			gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&i2c3 {
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-&mcspi1 {
-	status = "okay";
-};
-
-&mcspi2 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x3e0>;
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&qspi {
-	status = "okay";
-
-	spi-max-frequency = <76800000>;
-	flash@0 {
-		compatible = "s25fl256s1";
-		spi-max-frequency = <76800000>;
-		reg = <0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first four physical blocks
-		 * for a valid file to boot and the flash here is
-		 * 64KiB block size.
-		 */
-		partition@0 {
-			label = "QSPI.SPL";
-			reg = <0x00000000 0x00010000>;
-		};
-		partition@1 {
-			label = "QSPI.SPL.backup1";
-			reg = <0x00010000 0x00010000>;
-		};
-		partition@2 {
-			label = "QSPI.SPL.backup2";
-			reg = <0x00020000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.SPL.backup3";
-			reg = <0x00030000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.u-boot";
-			reg = <0x00040000 0x00100000>;
-		};
-		partition@5 {
-			label = "QSPI.u-boot-spl-os";
-			reg = <0x00140000 0x00080000>;
-		};
-		partition@6 {
-			label = "QSPI.u-boot-env";
-			reg = <0x001c0000 0x00010000>;
-		};
-		partition@7 {
-			label = "QSPI.u-boot-env.backup1";
-			reg = <0x001d0000 0x0010000>;
-		};
-		partition@8 {
-			label = "QSPI.kernel";
-			reg = <0x001e0000 0x0800000>;
-		};
-		partition@9 {
-			label = "QSPI.file-system";
-			reg = <0x009e0000 0x01620000>;
-		};
-	};
-};
-
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&usb1 {
-	dr_mode = "otg";
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&usb2 {
-	dr_mode = "host";
-	extcon = <&extcon_usb2>;
-};
-
-&atl {
-	assigned-clocks = <&abe_dpll_sys_clk_mux>,
-			  <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
-			  <&dpll_abe_ck>,
-			  <&dpll_abe_m2x2_ck>,
-			  <&atl_clkin2_ck>;
-	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
-	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
-
-	status = "okay";
-
-	atl2 {
-		bws = <DRA7_ATL_WS_MCASP2_FSX>;
-		aws = <DRA7_ATL_WS_MCASP3_FSX>;
-	};
-};
-
-&mcasp3 {
-	#sound-dai-cells = <0>;
-
-	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
-	assigned-clock-parents = <&atl_clkin2_ck>;
-
-	status = "okay";
-
-	op-mode = <0>;          /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializer */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		1 2 0 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&pcie1_rc {
-	status = "okay";
-};
-
-&mmc4 {
-	bus-width = <4>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	non-removable;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wifi@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-	};
-};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
deleted file mode 100644
index 8cbcf55a5a339..0000000000000
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ /dev/null
@@ -1,592 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "dra74x.dtsi"
-#include "dra7-evm-common.dtsi"
-#include "dra74x-mmc-iodelay.dtsi"
-
-/ {
-	model = "TI DRA742";
-	compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
-	};
-
-	evm_12v0: fixedregulator-evm_12v0 {
-		/* main supply */
-		compatible = "regulator-fixed";
-		regulator-name = "evm_12v0";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	evm_1v8_sw: fixedregulator-evm_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_1v8";
-		vin-supply = <&smps9_reg>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		ipu2_memory_region: ipu2-memory@95800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x95800000 0x0 0x3800000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp1_memory_region: dsp1-memory@99000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x99000000 0x0 0x4000000>;
-			reusable;
-			status = "okay";
-		};
-
-		ipu1_memory_region: ipu1-memory@9d000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9d000000 0x0 0x2000000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp2_memory_region: dsp2-memory@9f000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9f000000 0x0 0x800000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	evm_3v3_sd: fixedregulator-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_3v3_sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	evm_3v3_sw: fixedregulator-evm_3v3_sw {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_3v3_sw";
-		vin-supply = <&sysen1>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	aic_dvdd: fixedregulator-aic_dvdd {
-		/* TPS77018DBVT */
-		compatible = "regulator-fixed";
-		regulator-name = "aic_dvdd";
-		vin-supply = <&evm_3v3_sw>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vsys_3v3: fixedregulator-vsys3v3 {
-		/* Output of Cntlr A of TPS43351-Q1 on dra7-evm */
-		compatible = "regulator-fixed";
-		regulator-name = "vsys_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&evm_12v0>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	evm_5v0: fixedregulator-evm_5v0 {
-		/* Output of Cntlr B of TPS43351-Q1 on dra7-evm */
-		compatible = "regulator-fixed";
-		regulator-name = "evm_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&evm_12v0>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	evm_3v6: fixedregulator-evm_3v6 {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_3v6";
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-		vin-supply = <&evm_5v0>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vmmcwl_fixed: fixedregulator-mmcwl {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcwl_fixed";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio5 8 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		regulator-min-microvolt = <1350000>;
-		regulator-max-microvolt = <1350000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-		vin-supply = <&sysen2>;
-		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-	};
-
-};
-
-&dra7_pmx_core {
-	dcan1_pins_default: dcan1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
-		>;
-	};
-
-	dcan1_pins_sleep: dcan1_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
-		>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps659038: tps659038@58 {
-		compatible = "ti,tps659038";
-		reg = <0x58>;
-		ti,palmas-override-powerhold;
-		ti,system-power-controller;
-
-		tps659038_pmic {
-			compatible = "ti,tps659038-pmic";
-
-			regulators {
-				smps123_reg: smps123 {
-					/* VDD_MPU */
-					regulator-name = "smps123";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_DSPEVE */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_GPU - over VDD_SMPS6 */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps7_reg: smps7 {
-					/* CORE_VDD */
-					regulator-name = "smps7";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* VDD_IVAHD */
-					regulator-name = "smps8";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps9_reg: smps9 {
-					/* VDDS1V8 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo1_reg: ldo1 {
-					/* LDO1_OUT --> SDIO  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDD_RTCIO */
-					/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHY */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo9_reg: ldo9 {
-					/* VDD_RTC */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-allow-bypass;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				/* REGEN1 is unused */
-
-				regen2: regen2 {
-					/* Needed for PMIC internal resources */
-					regulator-name = "regen2";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				/* REGEN3 is unused */
-
-				sysen1: sysen1 {
-					/* PMIC_REGEN_3V3 */
-					regulator-name = "sysen1";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				sysen2: sysen2 {
-					/* PMIC_REGEN_DDR */
-					regulator-name = "sysen2";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-			};
-		};
-	};
-
-	pcf_lcd: gpio@20 {
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	pcf_gpio_21: gpio@21 {
-		compatible = "nxp,pcf8575";
-		reg = <0x21>;
-		lines-initial-states = <0x1408>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	tlv320aic3106: tlv320aic3106@19 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x19>;
-		adc-settle-ms = <40>;
-		ai3x-micbias-vg = <1>;		/* 2.0V */
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&evm_3v3_sw>;
-		IOVDD-supply = <&evm_3v3_sw>;
-		DRVDD-supply = <&evm_3v3_sw>;
-		DVDD-supply = <&aic_dvdd>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	pcf_hdmi: gpio@26 {
-		compatible = "nxp,pcf8575";
-		reg = <0x26>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		hdmi-audio-hog {
-			/* vin6_sel_s0: high: VIN6, low: audio */
-			gpio-hog;
-			gpios = <1 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "vin6_sel_s0";
-		};
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&evm_3v3_sd>;
-	vqmmc-supply = <&ldo1_reg>;
-	bus-width = <4>;
-	/*
-	 * SDCD signal is not being used here - using the fact that GPIO mode
-	 * is always hardwired.
-	 */
-	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
-	pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
-	pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&evm_1v8_sw>;
-	vqmmc-supply = <&evm_1v8_sw>;
-	bus-width = <8>;
-	non-removable;
-	pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
-	pinctrl-0 = <&mmc2_pins_default>;
-	pinctrl-1 = <&mmc2_pins_hs>;
-	pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>;
-	pinctrl-3 = <&mmc2_pins_ddr_rev20>;
-	pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>;
-	pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
-};
-
-&mmc4 {
-	status = "okay";
-	vmmc-supply = <&evm_3v6>;
-	vqmmc-supply = <&vmmcwl_fixed>;
-	pinctrl-names = "default-rev11", "default", "hs-rev11", "hs", "sdr12-rev11", "sdr12", "sdr25-rev11", "sdr25";
-	pinctrl-0 = <&mmc4_pins_default &mmc4_iodelay_ds_rev11_conf>;
-	pinctrl-1 = <&mmc4_pins_default &mmc4_iodelay_ds_rev20_conf>;
-	pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
-	pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
-	pinctrl-4 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
-	pinctrl-5 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
-	pinctrl-6 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
-	pinctrl-7 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
-};
-
-&cpu0 {
-	vdd-supply = <&smps123_reg>;
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	/*
-	* For the existing IOdelay configuration via U-Boot we don't
-	* support NAND on dra7-evm. Keep it disabled. Enabling it
-	* requires a different configuration by U-Boot.
-	*/
-	status = "disabled";
-	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>;		/* device IO registers */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>; /* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
-		ti,nand-xfer-type = "prefetch-dma";
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <80>;
-		gpmc,cs-wr-off-ns = <80>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <60>;
-		gpmc,adv-wr-off-ns = <60>;
-		gpmc,we-on-ns = <10>;
-		gpmc,we-off-ns = <50>;
-		gpmc,oe-on-ns = <4>;
-		gpmc,oe-off-ns = <40>;
-		gpmc,access-ns = <40>;
-		gpmc,wr-access-ns = <80>;
-		gpmc,rd-cycle-ns = <80>;
-		gpmc,wr-cycle-ns = <80>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x00020000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00020000 0x00020000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00040000 0x00020000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x00060000 0x00020000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x000c0000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x001c0000 0x00020000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x001e0000 0x00020000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00200000 0x00800000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x0f600000>;
-		};
-	};
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&gpio7_target {
-	ti,no-reset-on-init;
-	ti,no-idle-on-init;
-};
-
-&mac_sw {
-	status = "okay";
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
-	ti,dual-emac-pvid = <2>;
-};
-
-&davinci_mdio_sw {
-	ethphy0: ethernet-phy@2 {
-		reg = <2>;
-	};
-
-	ethphy1: ethernet-phy@3 {
-		reg = <3>;
-	};
-};
-
-&dcan1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep", "active";
-	pinctrl-0 = <&dcan1_pins_sleep>;
-	pinctrl-1 = <&dcan1_pins_sleep>;
-	pinctrl-2 = <&dcan1_pins_default>;
-};
-
-&ipu2 {
-	status = "okay";
-	memory-region = <&ipu2_memory_region>;
-};
-
-&ipu1 {
-	status = "okay";
-	memory-region = <&ipu1_memory_region>;
-};
-
-&dsp1 {
-	status = "okay";
-	memory-region = <&dsp1_memory_region>;
-};
-
-&dsp2 {
-	status = "okay";
-	memory-region = <&dsp2_memory_region>;
-};
diff --git a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
deleted file mode 100644
index a5bdc6431d8d0..0000000000000
--- a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common IPU and DSP data for TI DRA7xx/AM57xx platforms
- */
-
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
-		status = "okay";
-	};
-};
-
-&ipu2 {
-	mboxes = <&mailbox6 &mbox_ipu2_ipc3x>;
-	ti,timers = <&timer3>;
-	ti,watchdog-timers = <&timer4>, <&timer9>;
-};
-
-&ipu1 {
-	mboxes = <&mailbox5 &mbox_ipu1_ipc3x>;
-	ti,timers = <&timer11>;
-	ti,watchdog-timers = <&timer7>, <&timer8>;
-};
-
-&dsp1 {
-	mboxes = <&mailbox5 &mbox_dsp1_ipc3x>;
-	ti,timers = <&timer5>;
-	ti,watchdog-timers = <&timer10>;
-};
diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
deleted file mode 100644
index 0a31313065df4..0000000000000
--- a/arch/arm/boot/dts/dra7-iva-thermal.dtsi
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for DRA7x SoC IVA thermal
- *
- * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-iva_thermal: iva_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <500>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     4>;
-
-	trips {
-		iva_crit: iva_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
deleted file mode 100644
index 5733e3a4ea8e7..0000000000000
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ /dev/null
@@ -1,4606 +0,0 @@
-&l4_cfg {						/* 0x4a000000 */
-	compatible = "ti,dra7-l4-cfg", "simple-pm-bus";
-	power-domains = <&prm_coreaon>;
-	clocks = <&l4cfg_clkctrl DRA7_L4CFG_L4_CFG_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x4a000000 0x800>,
-	      <0x4a000800 0x800>,
-	      <0x4a001000 0x1000>;
-	reg-names = "ap", "la", "ia0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x4a000000 0x100000>,	/* segment 0 */
-		 <0x00100000 0x4a100000 0x100000>,	/* segment 1 */
-		 <0x00200000 0x4a200000 0x100000>;	/* segment 2 */
-
-	segment@0 {					/* 0x4a000000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
-			 <0x00001000 0x00001000 0x001000>,	/* ap 2 */
-			 <0x00002000 0x00002000 0x002000>,	/* ap 3 */
-			 <0x00004000 0x00004000 0x001000>,	/* ap 4 */
-			 <0x00005000 0x00005000 0x001000>,	/* ap 5 */
-			 <0x00006000 0x00006000 0x001000>,	/* ap 6 */
-			 <0x00008000 0x00008000 0x002000>,	/* ap 7 */
-			 <0x0000a000 0x0000a000 0x001000>,	/* ap 8 */
-			 <0x00056000 0x00056000 0x001000>,	/* ap 9 */
-			 <0x00057000 0x00057000 0x001000>,	/* ap 10 */
-			 <0x0005e000 0x0005e000 0x002000>,	/* ap 11 */
-			 <0x00060000 0x00060000 0x001000>,	/* ap 12 */
-			 <0x00080000 0x00080000 0x008000>,	/* ap 13 */
-			 <0x00088000 0x00088000 0x001000>,	/* ap 14 */
-			 <0x000a0000 0x000a0000 0x008000>,	/* ap 15 */
-			 <0x000a8000 0x000a8000 0x001000>,	/* ap 16 */
-			 <0x000d9000 0x000d9000 0x001000>,	/* ap 17 */
-			 <0x000da000 0x000da000 0x001000>,	/* ap 18 */
-			 <0x000dd000 0x000dd000 0x001000>,	/* ap 19 */
-			 <0x000de000 0x000de000 0x001000>,	/* ap 20 */
-			 <0x000e0000 0x000e0000 0x001000>,	/* ap 21 */
-			 <0x000e1000 0x000e1000 0x001000>,	/* ap 22 */
-			 <0x000f4000 0x000f4000 0x001000>,	/* ap 23 */
-			 <0x000f5000 0x000f5000 0x001000>,	/* ap 24 */
-			 <0x000f6000 0x000f6000 0x001000>,	/* ap 25 */
-			 <0x000f7000 0x000f7000 0x001000>,	/* ap 26 */
-			 <0x00090000 0x00090000 0x008000>,	/* ap 59 */
-			 <0x00098000 0x00098000 0x001000>;	/* ap 60 */
-
-		target-module@2000 {			/* 0x4a002000, ap 3 08.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x2000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2000 0x2000>;
-
-			scm: scm@0 {
-				compatible = "ti,dra7-scm-core", "simple-bus";
-				reg = <0 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x2000>;
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
-					reg = <0x0 0x1400>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x0 0x1400>;
-
-					pbias_regulator: pbias_regulator@e00 {
-						compatible = "ti,pbias-dra7", "ti,pbias-omap";
-						reg = <0xe00 0x4>;
-						syscon = <&scm_conf>;
-						pbias_mmc_reg: pbias_mmc_omap5 {
-							regulator-name = "pbias_mmc_omap5";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-						};
-					};
-
-					phy_gmii_sel: phy-gmii-sel {
-						compatible = "ti,dra7xx-phy-gmii-sel";
-						reg = <0x554 0x4>;
-						#phy-cells = <1>;
-					};
-
-					scm_conf_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				dra7_pmx_core: pinmux@1400 {
-					compatible = "ti,dra7-padconf",
-						     "pinctrl-single";
-					reg = <0x1400 0x0468>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					#interrupt-cells = <1>;
-					interrupt-controller;
-					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0x3fffffff>;
-				};
-
-				scm_conf1: scm_conf@1c04 {
-					compatible = "syscon";
-					reg = <0x1c04 0x0020>;
-					#syscon-cells = <2>;
-				};
-
-				scm_conf_pcie: scm_conf@1c24 {
-					compatible = "syscon";
-					reg = <0x1c24 0x0024>;
-				};
-
-				sdma_xbar: dma-router@b78 {
-					compatible = "ti,dra7-dma-crossbar";
-					reg = <0xb78 0xfc>;
-					#dma-cells = <1>;
-					dma-requests = <205>;
-					ti,dma-safe-map = <0>;
-					dma-masters = <&sdma>;
-				};
-
-				edma_xbar: dma-router@c78 {
-					compatible = "ti,dra7-dma-crossbar";
-					reg = <0xc78 0x7c>;
-					#dma-cells = <2>;
-					dma-requests = <204>;
-					ti,dma-safe-map = <0>;
-					dma-masters = <&edma>;
-				};
-			};
-		};
-
-		target-module@5000 {			/* 0x4a005000, ap 5 10.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x5000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5000 0x1000>;
-
-			cm_core_aon: cm_core_aon@0 {
-				compatible = "ti,dra7-cm-core-aon",
-					      "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0 0x2000>;
-				ranges = <0 0 0x2000>;
-
-				cm_core_aon_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				cm_core_aon_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		target-module@8000 {			/* 0x4a008000, ap 7 0e.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x8000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8000 0x2000>;
-
-			cm_core: cm_core@0 {
-				compatible = "ti,dra7-cm-core", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0 0x3000>;
-				ranges = <0 0 0x3000>;
-
-				cm_core_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				cm_core_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		target-module@56000 {			/* 0x4a056000, ap 9 02.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x56000 0x4>,
-			      <0x5602c 0x4>,
-			      <0x56028 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): core_pwrdm, dma_clkdm */
-			clocks = <&dma_clkctrl DRA7_DMA_DMA_SYSTEM_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x56000 0x1000>;
-
-			sdma: dma-controller@0 {
-				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				#dma-cells = <1>;
-				dma-channels = <32>;
-				dma-requests = <127>;
-			};
-		};
-
-		target-module@5e000 {			/* 0x4a05e000, ap 11 1a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5e000 0x2000>;
-		};
-
-		target-module@80000 {			/* 0x4a080000, ap 13 20.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x80000 0x4>,
-			      <0x80010 0x4>,
-			      <0x80014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x80000 0x8000>;
-
-			ocp2scp@0 {
-				compatible = "ti,omap-ocp2scp";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x8000>;
-				reg = <0x0 0x20>;
-
-				usb2_phy1: phy@4000 {
-					compatible = "ti,dra7x-usb2", "ti,omap-usb2";
-					reg = <0x4000 0x400>;
-					syscon-phy-power = <&scm_conf 0x300>;
-					clocks = <&usb_phy1_always_on_clk32k>,
-						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
-					clock-names =	"wkupclk",
-							"refclk";
-					#phy-cells = <0>;
-				};
-
-				usb2_phy2: phy@5000 {
-					compatible = "ti,dra7x-usb2-phy2",
-						     "ti,omap-usb2";
-					reg = <0x5000 0x400>;
-					syscon-phy-power = <&scm_conf 0xe74>;
-					clocks = <&usb_phy2_always_on_clk32k>,
-						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>;
-					clock-names =	"wkupclk",
-							"refclk";
-					#phy-cells = <0>;
-				};
-
-				usb3_phy1: phy@4400 {
-					compatible = "ti,omap-usb3";
-					reg = <0x4400 0x80>,
-					      <0x4800 0x64>,
-					      <0x4c00 0x40>;
-					reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-					syscon-phy-power = <&scm_conf 0x370>;
-					clocks = <&usb_phy3_always_on_clk32k>,
-						 <&sys_clkin1>,
-						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
-					clock-names =	"wkupclk",
-							"sysclk",
-							"refclk";
-					#phy-cells = <0>;
-				};
-			};
-		};
-
-		target-module@90000 {			/* 0x4a090000, ap 59 42.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x90000 0x4>,
-			      <0x90010 0x4>,
-			      <0x90014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x90000 0x8000>;
-
-			ocp2scp@0 {
-				compatible = "ti,omap-ocp2scp";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x8000>;
-				reg = <0x0 0x20>;
-
-				pcie1_phy: pciephy@4000 {
-					compatible = "ti,phy-pipe3-pcie";
-					reg = <0x4000 0x80>, /* phy_rx */
-					      <0x4400 0x64>; /* phy_tx */
-					reg-names = "phy_rx", "phy_tx";
-					syscon-phy-power = <&scm_conf_pcie 0x1c>;
-					syscon-pcs = <&scm_conf_pcie 0x10>;
-					clocks = <&dpll_pcie_ref_ck>,
-						 <&dpll_pcie_ref_m2ldo_ck>,
-						 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 8>,
-						 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>,
-						 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>,
-						 <&optfclk_pciephy_div>,
-						 <&sys_clkin1>;
-					clock-names = "dpll_ref", "dpll_ref_m2",
-						      "wkupclk", "refclk",
-						      "div-clk", "phy-div", "sysclk";
-					#phy-cells = <0>;
-				};
-
-				pcie2_phy: pciephy@5000 {
-					compatible = "ti,phy-pipe3-pcie";
-					reg = <0x5000 0x80>, /* phy_rx */
-					      <0x5400 0x64>; /* phy_tx */
-					reg-names = "phy_rx", "phy_tx";
-					syscon-phy-power = <&scm_conf_pcie 0x20>;
-					syscon-pcs = <&scm_conf_pcie 0x10>;
-					clocks = <&dpll_pcie_ref_ck>,
-						 <&dpll_pcie_ref_m2ldo_ck>,
-						 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 8>,
-						 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>,
-						 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>,
-						 <&optfclk_pciephy_div>,
-						 <&sys_clkin1>;
-					clock-names = "dpll_ref", "dpll_ref_m2",
-						      "wkupclk", "refclk",
-						      "div-clk", "phy-div", "sysclk";
-					#phy-cells = <0>;
-					status = "disabled";
-				};
-
-				sata_phy: phy@6000 {
-					compatible = "ti,phy-pipe3-sata";
-					reg = <0x6000 0x80>, /* phy_rx */
-					      <0x6400 0x64>, /* phy_tx */
-					      <0x6800 0x40>; /* pll_ctrl */
-					reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-					syscon-phy-power = <&scm_conf 0x374>;
-					clocks = <&sys_clkin1>,
-						 <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
-					clock-names = "sysclk", "refclk";
-					syscon-pllreset = <&scm_conf 0x3fc>;
-					#phy-cells = <0>;
-				};
-			};
-		};
-
-		target-module@a0000 {			/* 0x4a0a0000, ap 15 40.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa0000 0x8000>;
-		};
-
-		target-module@d9000 {			/* 0x4a0d9000, ap 17 72.0 */
-			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			reg = <0xd9038 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */
-			clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xd9000 0x1000>;
-
-			/* SmartReflex child device marked reserved in TRM */
-		};
-
-		target-module@dd000 {			/* 0x4a0dd000, ap 19 18.0 */
-			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			reg = <0xdd038 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */
-			clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xdd000 0x1000>;
-
-			/* SmartReflex child device marked reserved in TRM */
-		};
-
-		target-module@e0000 {			/* 0x4a0e0000, ap 21 28.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xe0000 0x1000>;
-		};
-
-		target-module@f4000 {			/* 0x4a0f4000, ap 23 04.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xf4000 0x4>,
-			      <0xf4010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xf4000 0x1000>;
-
-			mailbox1: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <3>;
-				ti,mbox-num-fifos = <8>;
-				status = "disabled";
-			};
-		};
-
-		target-module@f6000 {			/* 0x4a0f6000, ap 25 78.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xf6000 0x4>,
-			      <0xf6010 0x4>,
-			      <0xf6014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_SPINLOCK_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xf6000 0x1000>;
-
-			hwspinlock: spinlock@0 {
-				compatible = "ti,omap4-hwspinlock";
-				reg = <0x0 0x1000>;
-				#hwlock-cells = <1>;
-			};
-		};
-	};
-
-	segment@100000 {					/* 0x4a100000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00002000 0x00102000 0x001000>,	/* ap 27 */
-			 <0x00003000 0x00103000 0x001000>,	/* ap 28 */
-			 <0x00008000 0x00108000 0x001000>,	/* ap 29 */
-			 <0x00009000 0x00109000 0x001000>,	/* ap 30 */
-			 <0x00040000 0x00140000 0x010000>,	/* ap 31 */
-			 <0x00050000 0x00150000 0x001000>,	/* ap 32 */
-			 <0x00051000 0x00151000 0x001000>,	/* ap 33 */
-			 <0x00052000 0x00152000 0x001000>,	/* ap 34 */
-			 <0x00053000 0x00153000 0x001000>,	/* ap 35 */
-			 <0x00054000 0x00154000 0x001000>,	/* ap 36 */
-			 <0x00055000 0x00155000 0x001000>,	/* ap 37 */
-			 <0x00056000 0x00156000 0x001000>,	/* ap 38 */
-			 <0x00057000 0x00157000 0x001000>,	/* ap 39 */
-			 <0x00058000 0x00158000 0x001000>,	/* ap 40 */
-			 <0x0005b000 0x0015b000 0x001000>,	/* ap 41 */
-			 <0x0005c000 0x0015c000 0x001000>,	/* ap 42 */
-			 <0x0005d000 0x0015d000 0x001000>,	/* ap 45 */
-			 <0x0005e000 0x0015e000 0x001000>,	/* ap 46 */
-			 <0x0005f000 0x0015f000 0x001000>,	/* ap 47 */
-			 <0x00060000 0x00160000 0x001000>,	/* ap 48 */
-			 <0x00061000 0x00161000 0x001000>,	/* ap 49 */
-			 <0x00062000 0x00162000 0x001000>,	/* ap 50 */
-			 <0x00063000 0x00163000 0x001000>,	/* ap 51 */
-			 <0x00064000 0x00164000 0x001000>,	/* ap 52 */
-			 <0x00065000 0x00165000 0x001000>,	/* ap 53 */
-			 <0x00066000 0x00166000 0x001000>,	/* ap 54 */
-			 <0x00067000 0x00167000 0x001000>,	/* ap 55 */
-			 <0x00068000 0x00168000 0x001000>,	/* ap 56 */
-			 <0x0006d000 0x0016d000 0x001000>,	/* ap 57 */
-			 <0x0006e000 0x0016e000 0x001000>,	/* ap 58 */
-			 <0x00071000 0x00171000 0x001000>,	/* ap 61 */
-			 <0x00072000 0x00172000 0x001000>,	/* ap 62 */
-			 <0x00073000 0x00173000 0x001000>,	/* ap 63 */
-			 <0x00074000 0x00174000 0x001000>,	/* ap 64 */
-			 <0x00075000 0x00175000 0x001000>,	/* ap 65 */
-			 <0x00076000 0x00176000 0x001000>,	/* ap 66 */
-			 <0x00077000 0x00177000 0x001000>,	/* ap 67 */
-			 <0x00078000 0x00178000 0x001000>,	/* ap 68 */
-			 <0x00081000 0x00181000 0x001000>,	/* ap 69 */
-			 <0x00082000 0x00182000 0x001000>,	/* ap 70 */
-			 <0x00083000 0x00183000 0x001000>,	/* ap 71 */
-			 <0x00084000 0x00184000 0x001000>,	/* ap 72 */
-			 <0x00085000 0x00185000 0x001000>,	/* ap 73 */
-			 <0x00086000 0x00186000 0x001000>,	/* ap 74 */
-			 <0x00087000 0x00187000 0x001000>,	/* ap 75 */
-			 <0x00088000 0x00188000 0x001000>,	/* ap 76 */
-			 <0x00069000 0x00169000 0x001000>,	/* ap 103 */
-			 <0x0006a000 0x0016a000 0x001000>,	/* ap 104 */
-			 <0x00079000 0x00179000 0x001000>,	/* ap 105 */
-			 <0x0007a000 0x0017a000 0x001000>,	/* ap 106 */
-			 <0x0006b000 0x0016b000 0x001000>,	/* ap 107 */
-			 <0x0006c000 0x0016c000 0x001000>,	/* ap 108 */
-			 <0x0007b000 0x0017b000 0x001000>,	/* ap 121 */
-			 <0x0007c000 0x0017c000 0x001000>,	/* ap 122 */
-			 <0x0007d000 0x0017d000 0x001000>,	/* ap 123 */
-			 <0x0007e000 0x0017e000 0x001000>,	/* ap 124 */
-			 <0x00059000 0x00159000 0x001000>,	/* ap 125 */
-			 <0x0005a000 0x0015a000 0x001000>;	/* ap 126 */
-
-		target-module@2000 {			/* 0x4a102000, ap 27 3c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2000 0x1000>;
-		};
-
-		target-module@8000 {			/* 0x4a108000, ap 29 1e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8000 0x1000>;
-		};
-
-		target-module@40000 {			/* 0x4a140000, ap 31 06.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x400fc 4>,
-			      <0x41100 4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			power-domains = <&prm_l3init>;
-			clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 0>;
-			clock-names = "fck";
-			#size-cells = <1>;
-			#address-cells = <1>;
-			ranges = <0x0 0x40000 0x10000>;
-
-			sata: sata@0 {
-				compatible = "snps,dwc-ahci";
-				reg = <0 0x1100>, <0x1100 0x8>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&sata_phy>;
-				phy-names = "sata-phy";
-				clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
-				ports-implemented = <0x1>;
-			};
-		};
-
-		target-module@51000 {			/* 0x4a151000, ap 33 50.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x51000 0x1000>;
-		};
-
-		target-module@53000 {			/* 0x4a153000, ap 35 54.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x53000 0x1000>;
-		};
-
-		target-module@55000 {			/* 0x4a155000, ap 37 46.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x55000 0x1000>;
-		};
-
-		target-module@57000 {			/* 0x4a157000, ap 39 58.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x57000 0x1000>;
-		};
-
-		target-module@59000 {			/* 0x4a159000, ap 125 6a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x59000 0x1000>;
-		};
-
-		target-module@5b000 {			/* 0x4a15b000, ap 41 60.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5b000 0x1000>;
-		};
-
-		target-module@5d000 {			/* 0x4a15d000, ap 45 3a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5d000 0x1000>;
-		};
-
-		target-module@5f000 {			/* 0x4a15f000, ap 47 56.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5f000 0x1000>;
-		};
-
-		target-module@61000 {			/* 0x4a161000, ap 49 32.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x61000 0x1000>;
-		};
-
-		target-module@63000 {			/* 0x4a163000, ap 51 5c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x63000 0x1000>;
-		};
-
-		target-module@65000 {			/* 0x4a165000, ap 53 4e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x65000 0x1000>;
-		};
-
-		target-module@67000 {			/* 0x4a167000, ap 55 5e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x67000 0x1000>;
-		};
-
-		target-module@69000 {			/* 0x4a169000, ap 103 4a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x69000 0x1000>;
-		};
-
-		target-module@6b000 {			/* 0x4a16b000, ap 107 52.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6b000 0x1000>;
-		};
-
-		target-module@6d000 {			/* 0x4a16d000, ap 57 68.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6d000 0x1000>;
-		};
-
-		target-module@71000 {			/* 0x4a171000, ap 61 48.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x71000 0x1000>;
-		};
-
-		target-module@73000 {			/* 0x4a173000, ap 63 2a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x73000 0x1000>;
-		};
-
-		target-module@75000 {			/* 0x4a175000, ap 65 64.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x75000 0x1000>;
-		};
-
-		target-module@77000 {			/* 0x4a177000, ap 67 66.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x77000 0x1000>;
-		};
-
-		target-module@79000 {			/* 0x4a179000, ap 105 34.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x79000 0x1000>;
-		};
-
-		target-module@7b000 {			/* 0x4a17b000, ap 121 7c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x7b000 0x1000>;
-		};
-
-		target-module@7d000 {			/* 0x4a17d000, ap 123 7e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x7d000 0x1000>;
-		};
-
-		target-module@81000 {			/* 0x4a181000, ap 69 26.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x81000 0x1000>;
-		};
-
-		target-module@83000 {			/* 0x4a183000, ap 71 2e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x83000 0x1000>;
-		};
-
-		target-module@85000 {			/* 0x4a185000, ap 73 36.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x85000 0x1000>;
-		};
-
-		target-module@87000 {			/* 0x4a187000, ap 75 74.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x87000 0x1000>;
-		};
-	};
-
-	segment@200000 {					/* 0x4a200000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00018000 0x00218000 0x001000>,	/* ap 43 */
-			 <0x00019000 0x00219000 0x001000>,	/* ap 44 */
-			 <0x00000000 0x00200000 0x001000>,	/* ap 77 */
-			 <0x00001000 0x00201000 0x001000>,	/* ap 78 */
-			 <0x0000a000 0x0020a000 0x001000>,	/* ap 79 */
-			 <0x0000b000 0x0020b000 0x001000>,	/* ap 80 */
-			 <0x0000c000 0x0020c000 0x001000>,	/* ap 81 */
-			 <0x0000d000 0x0020d000 0x001000>,	/* ap 82 */
-			 <0x0000e000 0x0020e000 0x001000>,	/* ap 83 */
-			 <0x0000f000 0x0020f000 0x001000>,	/* ap 84 */
-			 <0x00010000 0x00210000 0x001000>,	/* ap 85 */
-			 <0x00011000 0x00211000 0x001000>,	/* ap 86 */
-			 <0x00012000 0x00212000 0x001000>,	/* ap 87 */
-			 <0x00013000 0x00213000 0x001000>,	/* ap 88 */
-			 <0x00014000 0x00214000 0x001000>,	/* ap 89 */
-			 <0x00015000 0x00215000 0x001000>,	/* ap 90 */
-			 <0x0002a000 0x0022a000 0x001000>,	/* ap 91 */
-			 <0x0002b000 0x0022b000 0x001000>,	/* ap 92 */
-			 <0x0001c000 0x0021c000 0x001000>,	/* ap 93 */
-			 <0x0001d000 0x0021d000 0x001000>,	/* ap 94 */
-			 <0x0001e000 0x0021e000 0x001000>,	/* ap 95 */
-			 <0x0001f000 0x0021f000 0x001000>,	/* ap 96 */
-			 <0x00020000 0x00220000 0x001000>,	/* ap 97 */
-			 <0x00021000 0x00221000 0x001000>,	/* ap 98 */
-			 <0x00024000 0x00224000 0x001000>,	/* ap 99 */
-			 <0x00025000 0x00225000 0x001000>,	/* ap 100 */
-			 <0x00026000 0x00226000 0x001000>,	/* ap 101 */
-			 <0x00027000 0x00227000 0x001000>,	/* ap 102 */
-			 <0x0002c000 0x0022c000 0x001000>,	/* ap 109 */
-			 <0x0002d000 0x0022d000 0x001000>,	/* ap 110 */
-			 <0x0002e000 0x0022e000 0x001000>,	/* ap 111 */
-			 <0x0002f000 0x0022f000 0x001000>,	/* ap 112 */
-			 <0x00030000 0x00230000 0x001000>,	/* ap 113 */
-			 <0x00031000 0x00231000 0x001000>,	/* ap 114 */
-			 <0x00032000 0x00232000 0x001000>,	/* ap 115 */
-			 <0x00033000 0x00233000 0x001000>,	/* ap 116 */
-			 <0x00034000 0x00234000 0x001000>,	/* ap 117 */
-			 <0x00035000 0x00235000 0x001000>,	/* ap 118 */
-			 <0x00036000 0x00236000 0x001000>,	/* ap 119 */
-			 <0x00037000 0x00237000 0x001000>,	/* ap 120 */
-			 <0x0001a000 0x0021a000 0x001000>,	/* ap 127 */
-			 <0x0001b000 0x0021b000 0x001000>;	/* ap 128 */
-
-		target-module@0 {			/* 0x4a200000, ap 77 3e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x1000>;
-		};
-
-		target-module@a000 {			/* 0x4a20a000, ap 79 30.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa000 0x1000>;
-		};
-
-		target-module@c000 {			/* 0x4a20c000, ap 81 0c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc000 0x1000>;
-		};
-
-		target-module@e000 {			/* 0x4a20e000, ap 83 22.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xe000 0x1000>;
-		};
-
-		target-module@10000 {			/* 0x4a210000, ap 85 14.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x10000 0x1000>;
-		};
-
-		target-module@12000 {			/* 0x4a212000, ap 87 16.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x12000 0x1000>;
-		};
-
-		target-module@14000 {			/* 0x4a214000, ap 89 1c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x14000 0x1000>;
-		};
-
-		target-module@18000 {			/* 0x4a218000, ap 43 12.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x18000 0x1000>;
-		};
-
-		target-module@1a000 {			/* 0x4a21a000, ap 127 7a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1a000 0x1000>;
-		};
-
-		target-module@1c000 {			/* 0x4a21c000, ap 93 38.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1c000 0x1000>;
-		};
-
-		target-module@1e000 {			/* 0x4a21e000, ap 95 0a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1e000 0x1000>;
-		};
-
-		target-module@20000 {			/* 0x4a220000, ap 97 24.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x20000 0x1000>;
-		};
-
-		target-module@24000 {			/* 0x4a224000, ap 99 44.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x24000 0x1000>;
-		};
-
-		target-module@26000 {			/* 0x4a226000, ap 101 2c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x26000 0x1000>;
-		};
-
-		target-module@2a000 {			/* 0x4a22a000, ap 91 4c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2a000 0x1000>;
-		};
-
-		target-module@2c000 {			/* 0x4a22c000, ap 109 6c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2c000 0x1000>;
-		};
-
-		target-module@2e000 {			/* 0x4a22e000, ap 111 6e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2e000 0x1000>;
-		};
-
-		target-module@30000 {			/* 0x4a230000, ap 113 70.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x30000 0x1000>;
-		};
-
-		target-module@32000 {			/* 0x4a232000, ap 115 5a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x32000 0x1000>;
-		};
-
-		target-module@34000 {			/* 0x4a234000, ap 117 76.1 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x34000 0x1000>;
-		};
-
-		target-module@36000 {			/* 0x4a236000, ap 119 62.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x36000 0x1000>;
-		};
-	};
-};
-
-&l4_per1 {						/* 0x48000000 */
-	compatible = "ti,dra7-l4-per1", "simple-pm-bus";
-	power-domains = <&prm_l4per>;
-	clocks = <&l4per_clkctrl DRA7_L4PER_L4_PER1_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x48000000 0x800>,
-	      <0x48000800 0x800>,
-	      <0x48001000 0x400>,
-	      <0x48001400 0x400>,
-	      <0x48001800 0x400>,
-	      <0x48001c00 0x400>;
-	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x48000000 0x200000>,	/* segment 0 */
-		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
-
-	segment@0 {					/* 0x48000000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00001000 0x00001000 0x000400>,	/* ap 1 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
-			 <0x00020000 0x00020000 0x001000>,	/* ap 3 */
-			 <0x00021000 0x00021000 0x001000>,	/* ap 4 */
-			 <0x00032000 0x00032000 0x001000>,	/* ap 5 */
-			 <0x00033000 0x00033000 0x001000>,	/* ap 6 */
-			 <0x00034000 0x00034000 0x001000>,	/* ap 7 */
-			 <0x00035000 0x00035000 0x001000>,	/* ap 8 */
-			 <0x00036000 0x00036000 0x001000>,	/* ap 9 */
-			 <0x00037000 0x00037000 0x001000>,	/* ap 10 */
-			 <0x0003e000 0x0003e000 0x001000>,	/* ap 11 */
-			 <0x0003f000 0x0003f000 0x001000>,	/* ap 12 */
-			 <0x00055000 0x00055000 0x001000>,	/* ap 13 */
-			 <0x00056000 0x00056000 0x001000>,	/* ap 14 */
-			 <0x00057000 0x00057000 0x001000>,	/* ap 15 */
-			 <0x00058000 0x00058000 0x001000>,	/* ap 16 */
-			 <0x00059000 0x00059000 0x001000>,	/* ap 17 */
-			 <0x0005a000 0x0005a000 0x001000>,	/* ap 18 */
-			 <0x0005b000 0x0005b000 0x001000>,	/* ap 19 */
-			 <0x0005c000 0x0005c000 0x001000>,	/* ap 20 */
-			 <0x0005d000 0x0005d000 0x001000>,	/* ap 21 */
-			 <0x0005e000 0x0005e000 0x001000>,	/* ap 22 */
-			 <0x00060000 0x00060000 0x001000>,	/* ap 23 */
-			 <0x0006a000 0x0006a000 0x001000>,	/* ap 24 */
-			 <0x0006b000 0x0006b000 0x001000>,	/* ap 25 */
-			 <0x0006c000 0x0006c000 0x001000>,	/* ap 26 */
-			 <0x0006d000 0x0006d000 0x001000>,	/* ap 27 */
-			 <0x0006e000 0x0006e000 0x001000>,	/* ap 28 */
-			 <0x0006f000 0x0006f000 0x001000>,	/* ap 29 */
-			 <0x00070000 0x00070000 0x001000>,	/* ap 30 */
-			 <0x00071000 0x00071000 0x001000>,	/* ap 31 */
-			 <0x00072000 0x00072000 0x001000>,	/* ap 32 */
-			 <0x00073000 0x00073000 0x001000>,	/* ap 33 */
-			 <0x00061000 0x00061000 0x001000>,	/* ap 34 */
-			 <0x00053000 0x00053000 0x001000>,	/* ap 35 */
-			 <0x00054000 0x00054000 0x001000>,	/* ap 36 */
-			 <0x000b2000 0x000b2000 0x001000>,	/* ap 37 */
-			 <0x000b3000 0x000b3000 0x001000>,	/* ap 38 */
-			 <0x00078000 0x00078000 0x001000>,	/* ap 39 */
-			 <0x00079000 0x00079000 0x001000>,	/* ap 40 */
-			 <0x00086000 0x00086000 0x001000>,	/* ap 41 */
-			 <0x00087000 0x00087000 0x001000>,	/* ap 42 */
-			 <0x00088000 0x00088000 0x001000>,	/* ap 43 */
-			 <0x00089000 0x00089000 0x001000>,	/* ap 44 */
-			 <0x00051000 0x00051000 0x001000>,	/* ap 45 */
-			 <0x00052000 0x00052000 0x001000>,	/* ap 46 */
-			 <0x00098000 0x00098000 0x001000>,	/* ap 47 */
-			 <0x00099000 0x00099000 0x001000>,	/* ap 48 */
-			 <0x0009a000 0x0009a000 0x001000>,	/* ap 49 */
-			 <0x0009b000 0x0009b000 0x001000>,	/* ap 50 */
-			 <0x0009c000 0x0009c000 0x001000>,	/* ap 51 */
-			 <0x0009d000 0x0009d000 0x001000>,	/* ap 52 */
-			 <0x00068000 0x00068000 0x001000>,	/* ap 53 */
-			 <0x00069000 0x00069000 0x001000>,	/* ap 54 */
-			 <0x00090000 0x00090000 0x002000>,	/* ap 55 */
-			 <0x00092000 0x00092000 0x001000>,	/* ap 56 */
-			 <0x000a4000 0x000a4000 0x001000>,	/* ap 57 */
-			 <0x000a6000 0x000a6000 0x001000>,	/* ap 58 */
-			 <0x000a8000 0x000a8000 0x004000>,	/* ap 59 */
-			 <0x000ac000 0x000ac000 0x001000>,	/* ap 60 */
-			 <0x000ad000 0x000ad000 0x001000>,	/* ap 61 */
-			 <0x000ae000 0x000ae000 0x001000>,	/* ap 62 */
-			 <0x00066000 0x00066000 0x001000>,	/* ap 63 */
-			 <0x00067000 0x00067000 0x001000>,	/* ap 64 */
-			 <0x000b4000 0x000b4000 0x001000>,	/* ap 65 */
-			 <0x000b5000 0x000b5000 0x001000>,	/* ap 66 */
-			 <0x000b8000 0x000b8000 0x001000>,	/* ap 67 */
-			 <0x000b9000 0x000b9000 0x001000>,	/* ap 68 */
-			 <0x000ba000 0x000ba000 0x001000>,	/* ap 69 */
-			 <0x000bb000 0x000bb000 0x001000>,	/* ap 70 */
-			 <0x000d1000 0x000d1000 0x001000>,	/* ap 71 */
-			 <0x000d2000 0x000d2000 0x001000>,	/* ap 72 */
-			 <0x000d5000 0x000d5000 0x001000>,	/* ap 73 */
-			 <0x000d6000 0x000d6000 0x001000>,	/* ap 74 */
-			 <0x000a2000 0x000a2000 0x001000>,	/* ap 75 */
-			 <0x000a3000 0x000a3000 0x001000>,	/* ap 76 */
-			 <0x00001400 0x00001400 0x000400>,	/* ap 77 */
-			 <0x00001800 0x00001800 0x000400>,	/* ap 78 */
-			 <0x00001c00 0x00001c00 0x000400>,	/* ap 79 */
-			 <0x000a5000 0x000a5000 0x001000>,	/* ap 80 */
-			 <0x0007a000 0x0007a000 0x001000>,	/* ap 81 */
-			 <0x0007b000 0x0007b000 0x001000>,	/* ap 82 */
-			 <0x0007c000 0x0007c000 0x001000>,	/* ap 83 */
-			 <0x0007d000 0x0007d000 0x001000>;	/* ap 84 */
-
-		target-module@20000 {			/* 0x48020000, ap 3 04.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x20050 0x4>,
-			      <0x20054 0x4>,
-			      <0x20058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_UART3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x20000 0x1000>;
-
-			uart3: serial@0 {
-				compatible = "ti,dra742-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-				status = "disabled";
-				dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@32000 {			/* 0x48032000, ap 5 3e.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x32000 0x4>,
-			      <0x32010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x32000 0x1000>;
-
-			timer2: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		timer3_target: target-module@34000 {	/* 0x48034000, ap 7 46.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x34000 0x4>,
-			      <0x34010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x34000 0x1000>;
-
-			timer3: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		timer4_target: target-module@36000 {	/* 0x48036000, ap 9 4e.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x36000 0x4>,
-			      <0x36010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x36000 0x1000>;
-
-			timer4: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@3e000 {			/* 0x4803e000, ap 11 56.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x3e000 0x4>,
-			      <0x3e010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3e000 0x1000>;
-
-			timer9: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		gpio7_target: target-module@51000 {		/* 0x48051000, ap 45 2e.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x51000 0x4>,
-			      <0x51010 0x4>,
-			      <0x51114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 0>,
-				 <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x51000 0x1000>;
-
-			gpio7: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@53000 {			/* 0x48053000, ap 35 36.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x53000 0x4>,
-			      <0x53010 0x4>,
-			      <0x53114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 0>,
-				 <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x53000 0x1000>;
-
-			gpio8: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		gpio2_target: target-module@55000 {		/* 0x48055000, ap 13 0e.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x55000 0x4>,
-			      <0x55010 0x4>,
-			      <0x55114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 0>,
-				 <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x55000 0x1000>;
-
-			gpio2: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		gpio3_target: target-module@57000 {		/* 0x48057000, ap 15 06.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x57000 0x4>,
-			      <0x57010 0x4>,
-			      <0x57114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 0>,
-				 <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x57000 0x1000>;
-
-			gpio3: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@59000 {			/* 0x48059000, ap 17 16.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x59000 0x4>,
-			      <0x59010 0x4>,
-			      <0x59114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 0>,
-				 <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x59000 0x1000>;
-
-			gpio4: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@5b000 {			/* 0x4805b000, ap 19 1e.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x5b000 0x4>,
-			      <0x5b010 0x4>,
-			      <0x5b114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 0>,
-				 <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5b000 0x1000>;
-
-			gpio5: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@5d000 {			/* 0x4805d000, ap 21 26.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x5d000 0x4>,
-			      <0x5d010 0x4>,
-			      <0x5d114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 0>,
-				 <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5d000 0x1000>;
-
-			gpio6: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@60000 {			/* 0x48060000, ap 23 32.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x60000 0x8>,
-			      <0x60010 0x8>,
-			      <0x60090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_I2C3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x60000 0x1000>;
-
-			i2c3: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		target-module@66000 {			/* 0x48066000, ap 63 14.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x66050 0x4>,
-			      <0x66054 0x4>,
-			      <0x66058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_UART5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x66000 0x1000>;
-
-			uart5: serial@0 {
-				compatible = "ti,dra742-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-				status = "disabled";
-				dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@68000 {			/* 0x48068000, ap 53 1c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x68050 0x4>,
-			      <0x68054 0x4>,
-			      <0x68058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
-			clocks = <&ipu_clkctrl DRA7_IPU_UART6_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x68000 0x1000>;
-
-			uart6: serial@0 {
-				compatible = "ti,dra742-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-				status = "disabled";
-				dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@6a000 {			/* 0x4806a000, ap 24 24.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x6a050 0x4>,
-			      <0x6a054 0x4>,
-			      <0x6a058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_UART1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6a000 0x1000>;
-
-			uart1: serial@0 {
-				compatible = "ti,dra742-uart";
-				reg = <0x0 0x100>;
-				interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-				status = "disabled";
-				dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@6c000 {			/* 0x4806c000, ap 26 2c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x6c050 0x4>,
-			      <0x6c054 0x4>,
-			      <0x6c058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_UART2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6c000 0x1000>;
-
-			uart2: serial@0 {
-				compatible = "ti,dra742-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-				status = "disabled";
-				dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@6e000 {			/* 0x4806e000, ap 28 0c.1 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x6e050 0x4>,
-			      <0x6e054 0x4>,
-			      <0x6e058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_UART4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6e000 0x1000>;
-
-			uart4: serial@0 {
-				compatible = "ti,dra742-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-			                        status = "disabled";
-				dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@70000 {			/* 0x48070000, ap 30 22.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x70000 0x8>,
-			      <0x70010 0x8>,
-			      <0x70090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_I2C1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x70000 0x1000>;
-
-			i2c1: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		target-module@72000 {			/* 0x48072000, ap 32 2a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x72000 0x8>,
-			      <0x72010 0x8>,
-			      <0x72090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_I2C2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x72000 0x1000>;
-
-			i2c2: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		target-module@78000 {			/* 0x48078000, ap 39 0a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x78000 0x4>,
-			      <0x78010 0x4>,
-			      <0x78014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_ELM_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x78000 0x1000>;
-
-			elm: elm@0 {
-				compatible = "ti,am3352-elm";
-				reg = <0x0 0xfc0>;      /* device IO registers */
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@7a000 {			/* 0x4807a000, ap 81 3a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x7a000 0x8>,
-			      <0x7a010 0x8>,
-			      <0x7a090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_I2C4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x7a000 0x1000>;
-
-			i2c4: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		target-module@7c000 {			/* 0x4807c000, ap 83 4a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x7c000 0x8>,
-			      <0x7c010 0x8>,
-			      <0x7c090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
-			clocks = <&ipu_clkctrl DRA7_IPU_I2C5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x7c000 0x1000>;
-
-			i2c5: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		target-module@86000 {			/* 0x48086000, ap 41 5e.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x86000 0x4>,
-			      <0x86010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x86000 0x1000>;
-
-			timer10: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@88000 {			/* 0x48088000, ap 43 66.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x88000 0x4>,
-			      <0x88010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x88000 0x1000>;
-
-			timer11: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@90000 {			/* 0x48090000, ap 55 12.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x91fe0 0x4>,
-			      <0x91fe4 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
-			clocks = <&l4sec_clkctrl DRA7_L4SEC_RNG_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x90000 0x2000>;
-
-			rng: rng@0 {
-				compatible = "ti,omap4-rng";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&l3_iclk_div>;
-				clock-names = "fck";
-			};
-		};
-
-		target-module@98000 {			/* 0x48098000, ap 47 08.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x98000 0x4>,
-			      <0x98010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x98000 0x1000>;
-
-			mcspi1: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,spi-num-cs = <4>;
-				dmas = <&sdma_xbar 35>,
-				       <&sdma_xbar 36>,
-				       <&sdma_xbar 37>,
-				       <&sdma_xbar 38>,
-				       <&sdma_xbar 39>,
-				       <&sdma_xbar 40>,
-				       <&sdma_xbar 41>,
-				       <&sdma_xbar 42>;
-				dma-names = "tx0", "rx0", "tx1", "rx1",
-					    "tx2", "rx2", "tx3", "rx3";
-				status = "disabled";
-			};
-		};
-
-		target-module@9a000 {			/* 0x4809a000, ap 49 10.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x9a000 0x4>,
-			      <0x9a010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x9a000 0x1000>;
-
-			mcspi2: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,spi-num-cs = <2>;
-				dmas = <&sdma_xbar 43>,
-				       <&sdma_xbar 44>,
-				       <&sdma_xbar 45>,
-				       <&sdma_xbar 46>;
-				dma-names = "tx0", "rx0", "tx1", "rx1";
-				status = "disabled";
-			};
-		};
-
-		target-module@9c000 {			/* 0x4809c000, ap 51 38.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x9c000 0x4>,
-			      <0x9c010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl DRA7_L3INIT_MMC1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x9c000 0x1000>;
-
-			mmc1: mmc@0 {
-				compatible = "ti,dra7-sdhci";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				pbias-supply = <&pbias_mmc_reg>;
-				max-frequency = <192000000>;
-				mmc-ddr-1_8v;
-				mmc-ddr-3_3v;
-			};
-		};
-
-		target-module@a2000 {			/* 0x480a2000, ap 75 02.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa2000 0x1000>;
-		};
-
-		target-module@a4000 {			/* 0x480a4000, ap 57 42.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x000a4000 0x00001000>,
-				 <0x00001000 0x000a5000 0x00001000>;
-		};
-
-		des_target: target-module@a5000 {	/* 0x480a5000 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xa5030 0x4>,
-			      <0xa5034 0x4>,
-			      <0xa5038 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
-			clocks = <&l4sec_clkctrl DRA7_L4SEC_DES_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0xa5000 0x00001000>;
-
-			des: des@0 {
-				compatible = "ti,omap4-des";
-				reg = <0 0xa0>;
-				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
-				dma-names = "tx", "rx";
-				clocks = <&l3_iclk_div>;
-				clock-names = "fck";
-			};
-		};
-
-		target-module@a8000 {			/* 0x480a8000, ap 59 1a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa8000 0x4000>;
-		};
-
-		target-module@ad000 {			/* 0x480ad000, ap 61 20.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xad000 0x4>,
-			      <0xad010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_MMC3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xad000 0x1000>;
-
-			mmc3: mmc@0 {
-				compatible = "ti,dra7-sdhci";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				/* Errata i887 limits max-frequency of MMC3 to 64 MHz */
-				max-frequency = <64000000>;
-				/* SDMA is not supported */
-				sdhci-caps-mask = <0x0 0x400000>;
-			};
-		};
-
-		target-module@b2000 {			/* 0x480b2000, ap 37 52.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xb2000 0x4>,
-			      <0xb2014 0x4>,
-			      <0xb2018 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,syss-mask = <1>;
-			ti,no-reset-on-init;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_HDQ1W_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb2000 0x1000>;
-
-			hdqw1w: 1w@0 {
-				compatible = "ti,omap3-1w";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@b4000 {			/* 0x480b4000, ap 65 40.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xb4000 0x4>,
-			      <0xb4010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl DRA7_L3INIT_MMC2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb4000 0x1000>;
-
-			mmc2: mmc@0 {
-				compatible = "ti,dra7-sdhci";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				max-frequency = <192000000>;
-				/* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */
-				sdhci-caps-mask = <0x7 0x0>;
-				mmc-hs200-1_8v;
-				mmc-ddr-1_8v;
-				mmc-ddr-3_3v;
-			};
-		};
-
-		target-module@b8000 {			/* 0x480b8000, ap 67 48.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xb8000 0x4>,
-			      <0xb8010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb8000 0x1000>;
-
-			mcspi3: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,spi-num-cs = <2>;
-				dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
-				dma-names = "tx0", "rx0";
-				status = "disabled";
-			};
-		};
-
-		target-module@ba000 {			/* 0x480ba000, ap 69 18.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xba000 0x4>,
-			      <0xba010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xba000 0x1000>;
-
-			mcspi4: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,spi-num-cs = <1>;
-				dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
-				dma-names = "tx0", "rx0";
-				status = "disabled";
-			};
-		};
-
-		target-module@d1000 {			/* 0x480d1000, ap 71 28.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xd1000 0x4>,
-			      <0xd1010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_MMC4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xd1000 0x1000>;
-
-			mmc4: mmc@0 {
-				compatible = "ti,dra7-sdhci";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				max-frequency = <192000000>;
-				/* SDMA is not supported */
-				sdhci-caps-mask = <0x0 0x400000>;
-			};
-		};
-
-		target-module@d5000 {			/* 0x480d5000, ap 73 30.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xd5000 0x1000>;
-		};
-	};
-
-	segment@200000 {					/* 0x48200000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&l4_per2 {						/* 0x48400000 */
-	compatible = "ti,dra7-l4-per2", "simple-pm-bus";
-	power-domains = <&prm_l4per>;
-	clocks = <&l4per2_clkctrl DRA7_L4PER2_L4_PER2_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x48400000 0x800>,
-	      <0x48400800 0x800>,
-	      <0x48401000 0x400>,
-	      <0x48401400 0x400>,
-	      <0x48401800 0x400>;
-	reg-names = "ap", "la", "ia0", "ia1", "ia2";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x48400000 0x400000>,	/* segment 0 */
-		 <0x45800000 0x45800000 0x400000>,	/* L3 data port */
-		 <0x45c00000 0x45c00000 0x400000>,	/* L3 data port */
-		 <0x46000000 0x46000000 0x400000>,	/* L3 data port */
-		 <0x48436000 0x48436000 0x400000>,	/* L3 data port */
-		 <0x4843a000 0x4843a000 0x400000>,	/* L3 data port */
-		 <0x4844c000 0x4844c000 0x400000>,	/* L3 data port */
-		 <0x48450000 0x48450000 0x400000>,	/* L3 data port */
-		 <0x48454000 0x48454000 0x400000>;	/* L3 data port */
-
-	segment@0 {					/* 0x48400000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00001000 0x00001000 0x000400>,	/* ap 1 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
-			 <0x00084000 0x00084000 0x004000>,	/* ap 3 */
-			 <0x00001400 0x00001400 0x000400>,	/* ap 4 */
-			 <0x00001800 0x00001800 0x000400>,	/* ap 5 */
-			 <0x00088000 0x00088000 0x001000>,	/* ap 6 */
-			 <0x0002c000 0x0002c000 0x001000>,	/* ap 7 */
-			 <0x0002d000 0x0002d000 0x001000>,	/* ap 8 */
-			 <0x00060000 0x00060000 0x002000>,	/* ap 9 */
-			 <0x00062000 0x00062000 0x001000>,	/* ap 10 */
-			 <0x00064000 0x00064000 0x002000>,	/* ap 11 */
-			 <0x00066000 0x00066000 0x001000>,	/* ap 12 */
-			 <0x00068000 0x00068000 0x002000>,	/* ap 13 */
-			 <0x0006a000 0x0006a000 0x001000>,	/* ap 14 */
-			 <0x0006c000 0x0006c000 0x002000>,	/* ap 15 */
-			 <0x0006e000 0x0006e000 0x001000>,	/* ap 16 */
-			 <0x00036000 0x00036000 0x001000>,	/* ap 17 */
-			 <0x00037000 0x00037000 0x001000>,	/* ap 18 */
-			 <0x00070000 0x00070000 0x002000>,	/* ap 19 */
-			 <0x00072000 0x00072000 0x001000>,	/* ap 20 */
-			 <0x0003a000 0x0003a000 0x001000>,	/* ap 21 */
-			 <0x0003b000 0x0003b000 0x001000>,	/* ap 22 */
-			 <0x0003c000 0x0003c000 0x001000>,	/* ap 23 */
-			 <0x0003d000 0x0003d000 0x001000>,	/* ap 24 */
-			 <0x0003e000 0x0003e000 0x001000>,	/* ap 25 */
-			 <0x0003f000 0x0003f000 0x001000>,	/* ap 26 */
-			 <0x00040000 0x00040000 0x001000>,	/* ap 27 */
-			 <0x00041000 0x00041000 0x001000>,	/* ap 28 */
-			 <0x00042000 0x00042000 0x001000>,	/* ap 29 */
-			 <0x00043000 0x00043000 0x001000>,	/* ap 30 */
-			 <0x00080000 0x00080000 0x002000>,	/* ap 31 */
-			 <0x00082000 0x00082000 0x001000>,	/* ap 32 */
-			 <0x0004a000 0x0004a000 0x001000>,	/* ap 33 */
-			 <0x0004b000 0x0004b000 0x001000>,	/* ap 34 */
-			 <0x00074000 0x00074000 0x002000>,	/* ap 35 */
-			 <0x00076000 0x00076000 0x001000>,	/* ap 36 */
-			 <0x00050000 0x00050000 0x001000>,	/* ap 37 */
-			 <0x00051000 0x00051000 0x001000>,	/* ap 38 */
-			 <0x00078000 0x00078000 0x002000>,	/* ap 39 */
-			 <0x0007a000 0x0007a000 0x001000>,	/* ap 40 */
-			 <0x00054000 0x00054000 0x001000>,	/* ap 41 */
-			 <0x00055000 0x00055000 0x001000>,	/* ap 42 */
-			 <0x0007c000 0x0007c000 0x002000>,	/* ap 43 */
-			 <0x0007e000 0x0007e000 0x001000>,	/* ap 44 */
-			 <0x0004c000 0x0004c000 0x001000>,	/* ap 45 */
-			 <0x0004d000 0x0004d000 0x001000>,	/* ap 46 */
-			 <0x00020000 0x00020000 0x001000>,	/* ap 47 */
-			 <0x00021000 0x00021000 0x001000>,	/* ap 48 */
-			 <0x00022000 0x00022000 0x001000>,	/* ap 49 */
-			 <0x00023000 0x00023000 0x001000>,	/* ap 50 */
-			 <0x00024000 0x00024000 0x001000>,	/* ap 51 */
-			 <0x00025000 0x00025000 0x001000>,	/* ap 52 */
-			 <0x00046000 0x00046000 0x001000>,	/* ap 53 */
-			 <0x00047000 0x00047000 0x001000>,	/* ap 54 */
-			 <0x00048000 0x00048000 0x001000>,	/* ap 55 */
-			 <0x00049000 0x00049000 0x001000>,	/* ap 56 */
-			 <0x00058000 0x00058000 0x002000>,	/* ap 57 */
-			 <0x0005a000 0x0005a000 0x001000>,	/* ap 58 */
-			 <0x0005b000 0x0005b000 0x001000>,	/* ap 59 */
-			 <0x0005c000 0x0005c000 0x001000>,	/* ap 60 */
-			 <0x0005d000 0x0005d000 0x001000>,	/* ap 61 */
-			 <0x0005e000 0x0005e000 0x001000>,	/* ap 62 */
-			 <0x45800000 0x45800000 0x400000>,	/* L3 data port */
-			 <0x45c00000 0x45c00000 0x400000>,	/* L3 data port */
-			 <0x46000000 0x46000000 0x400000>,	/* L3 data port */
-			 <0x48436000 0x48436000 0x400000>,	/* L3 data port */
-			 <0x4843a000 0x4843a000 0x400000>,	/* L3 data port */
-			 <0x4844c000 0x4844c000 0x400000>,	/* L3 data port */
-			 <0x48450000 0x48450000 0x400000>,	/* L3 data port */
-			 <0x48454000 0x48454000 0x400000>;	/* L3 data port */
-
-		target-module@20000 {			/* 0x48420000, ap 47 02.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x20050 0x4>,
-			      <0x20054 0x4>,
-			      <0x20058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_UART7_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x20000 0x1000>;
-
-			uart7: serial@0 {
-				compatible = "ti,dra742-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-				status = "disabled";
-			};
-		};
-
-		target-module@22000 {			/* 0x48422000, ap 49 0a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x22050 0x4>,
-			      <0x22054 0x4>,
-			      <0x22058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_UART8_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x22000 0x1000>;
-
-			uart8: serial@0 {
-				compatible = "ti,dra742-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-				status = "disabled";
-			};
-		};
-
-		target-module@24000 {			/* 0x48424000, ap 51 12.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x24050 0x4>,
-			      <0x24054 0x4>,
-			      <0x24058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_UART9_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x24000 0x1000>;
-
-			uart9: serial@0 {
-				compatible = "ti,dra742-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-				status = "disabled";
-			};
-		};
-
-		target-module@2c000 {			/* 0x4842c000, ap 7 18.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2c000 0x1000>;
-		};
-
-		target-module@36000 {			/* 0x48436000, ap 17 06.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x36000 0x1000>;
-		};
-
-		target-module@3a000 {			/* 0x4843a000, ap 21 3e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3a000 0x1000>;
-		};
-
-		atl_tm: target-module@3c000 {		/* 0x4843c000, ap 23 08.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x3c000 0x4>;
-			reg-names = "rev";
-			clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3c000 0x1000>;
-
-			atl: atl@0 {
-				compatible = "ti,dra7-atl";
-				reg = <0x0 0x3ff>;
-				ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
-						     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
-				clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
-				clock-names = "fck";
-				status = "disabled";
-			};
-		};
-
-		target-module@3e000 {			/* 0x4843e000, ap 25 30.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x3e000 0x4>,
-			      <0x3e004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3e000 0x1000>;
-
-			epwmss0: epwmss@0 {
-				compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
-				reg = <0x0 0x30>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				status = "disabled";
-				ranges = <0 0 0x1000>;
-
-				ecap0: pwm@100 {
-					compatible = "ti,dra746-ecap",
-						     "ti,am3352-ecap";
-					#pwm-cells = <3>;
-					reg = <0x100 0x80>;
-					clocks = <&l4_root_clk_div>;
-					clock-names = "fck";
-					status = "disabled";
-				};
-
-				ehrpwm0: pwm@200 {
-					compatible = "ti,dra746-ehrpwm",
-						     "ti,am3352-ehrpwm";
-					#pwm-cells = <3>;
-					reg = <0x200 0x80>;
-					clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
-					clock-names = "tbclk", "fck";
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@40000 {			/* 0x48440000, ap 27 38.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x40000 0x4>,
-			      <0x40004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x40000 0x1000>;
-
-			epwmss1: epwmss@0 {
-				compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
-				reg = <0x0 0x30>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				status = "disabled";
-				ranges = <0 0 0x1000>;
-
-				ecap1: pwm@100 {
-					compatible = "ti,dra746-ecap",
-						     "ti,am3352-ecap";
-					#pwm-cells = <3>;
-					reg = <0x100 0x80>;
-					clocks = <&l4_root_clk_div>;
-					clock-names = "fck";
-					status = "disabled";
-				};
-
-				ehrpwm1: pwm@200 {
-					compatible = "ti,dra746-ehrpwm",
-						     "ti,am3352-ehrpwm";
-					#pwm-cells = <3>;
-					reg = <0x200 0x80>;
-					clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
-					clock-names = "tbclk", "fck";
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@42000 {			/* 0x48442000, ap 29 20.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x42000 0x4>,
-			      <0x42004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x42000 0x1000>;
-
-			epwmss2: epwmss@0 {
-				compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
-				reg = <0x0 0x30>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				status = "disabled";
-				ranges = <0 0 0x1000>;
-
-				ecap2: pwm@100 {
-					compatible = "ti,dra746-ecap",
-						     "ti,am3352-ecap";
-					#pwm-cells = <3>;
-					reg = <0x100 0x80>;
-					clocks = <&l4_root_clk_div>;
-					clock-names = "fck";
-					status = "disabled";
-				};
-
-				ehrpwm2: pwm@200 {
-					compatible = "ti,dra746-ehrpwm",
-						     "ti,am3352-ehrpwm";
-					#pwm-cells = <3>;
-					reg = <0x200 0x80>;
-					clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
-					clock-names = "tbclk", "fck";
-					status = "disabled";
-				};
-			};
-		};
-
-		target-module@46000 {			/* 0x48446000, ap 53 40.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x46000 0x1000>;
-		};
-
-		target-module@48000 {			/* 0x48448000, ap 55 48.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48000 0x1000>;
-		};
-
-		target-module@4a000 {			/* 0x4844a000, ap 33 1a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4a000 0x1000>;
-		};
-
-		target-module@4c000 {			/* 0x4844c000, ap 45 1c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4c000 0x1000>;
-		};
-
-		target-module@50000 {			/* 0x48450000, ap 37 24.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x50000 0x1000>;
-		};
-
-		target-module@54000 {			/* 0x48454000, ap 41 2c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x54000 0x1000>;
-		};
-
-		target-module@58000 {			/* 0x48458000, ap 57 28.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x58000 0x2000>;
-		};
-
-		target-module@5b000 {			/* 0x4845b000, ap 59 46.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5b000 0x1000>;
-		};
-
-		target-module@5d000 {			/* 0x4845d000, ap 61 22.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5d000 0x1000>;
-		};
-
-		target-module@60000 {			/* 0x48460000, ap 9 0e.0 */
-			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			reg = <0x60000 0x4>,
-			      <0x60004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
-			clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>,
-				 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
-				 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x60000 0x2000>,
-				 <0x45800000 0x45800000 0x400000>;
-
-			mcasp1: mcasp@0 {
-				compatible = "ti,dra7-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x45800000 0x1000>;	/* L3 data port */
-				reg-names = "mpu","dat";
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx", "rx";
-				dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
-				dma-names = "tx", "rx";
-				clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>,
-					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
-					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
-				clock-names = "fck", "ahclkx", "ahclkr";
-				status = "disabled";
-			};
-		};
-
-		target-module@64000 {			/* 0x48464000, ap 11 1e.0 */
-			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			reg = <0x64000 0x4>,
-			      <0x64004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x64000 0x2000>,
-				 <0x45c00000 0x45c00000 0x400000>;
-
-			mcasp2: mcasp@0 {
-				compatible = "ti,dra7-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x45c00000 0x1000>;	/* L3 data port */
-				reg-names = "mpu","dat";
-				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx", "rx";
-				dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
-				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>,
-					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
-					 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
-				clock-names = "fck", "ahclkx", "ahclkr";
-				status = "disabled";
-			};
-		};
-
-		target-module@68000 {			/* 0x48468000, ap 13 26.0 */
-			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			reg = <0x68000 0x4>,
-			      <0x68004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
-			clock-names = "fck", "ahclkx";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x68000 0x2000>,
-				 <0x46000000 0x46000000 0x400000>;
-
-			mcasp3: mcasp@0 {
-				compatible = "ti,dra7-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x46000000 0x1000>;	/* L3 data port */
-				reg-names = "mpu","dat";
-				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx", "rx";
-				dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
-				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
-					 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
-				clock-names = "fck", "ahclkx";
-				status = "disabled";
-			};
-		};
-
-		target-module@6c000 {			/* 0x4846c000, ap 15 2e.0 */
-			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			reg = <0x6c000 0x4>,
-			      <0x6c004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
-			clock-names = "fck", "ahclkx";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6c000 0x2000>,
-				 <0x48436000 0x48436000 0x400000>;
-
-			mcasp4: mcasp@0 {
-				compatible = "ti,dra7-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x48436000 0x1000>;	/* L3 data port */
-				reg-names = "mpu","dat";
-				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx", "rx";
-				dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
-				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
-					 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
-				clock-names = "fck", "ahclkx";
-				status = "disabled";
-			};
-		};
-
-		target-module@70000 {			/* 0x48470000, ap 19 36.0 */
-			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			reg = <0x70000 0x4>,
-			      <0x70004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
-			clock-names = "fck", "ahclkx";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x70000 0x2000>,
-				 <0x4843a000 0x4843a000 0x400000>;
-
-			mcasp5: mcasp@0 {
-				compatible = "ti,dra7-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x4843a000 0x1000>;	/* L3 data port */
-				reg-names = "mpu","dat";
-				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx", "rx";
-				dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
-				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
-					 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
-				clock-names = "fck", "ahclkx";
-				status = "disabled";
-			};
-		};
-
-		target-module@74000 {			/* 0x48474000, ap 35 14.0 */
-			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			reg = <0x74000 0x4>,
-			      <0x74004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
-			clock-names = "fck", "ahclkx";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x74000 0x2000>,
-				 <0x4844c000 0x4844c000 0x400000>;
-
-			mcasp6: mcasp@0 {
-				compatible = "ti,dra7-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x4844c000 0x1000>;	/* L3 data port */
-				reg-names = "mpu","dat";
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx", "rx";
-				dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
-				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
-					 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
-				clock-names = "fck", "ahclkx";
-				status = "disabled";
-			};
-		};
-
-		target-module@78000 {			/* 0x48478000, ap 39 0c.0 */
-			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			reg = <0x78000 0x4>,
-			      <0x78004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
-			clock-names = "fck", "ahclkx";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x78000 0x2000>,
-				 <0x48450000 0x48450000 0x400000>;
-
-			mcasp7: mcasp@0 {
-				compatible = "ti,dra7-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x48450000 0x1000>;	/* L3 data port */
-				reg-names = "mpu","dat";
-				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx", "rx";
-				dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
-				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
-					 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
-				clock-names = "fck", "ahclkx";
-				status = "disabled";
-			};
-		};
-
-		target-module@7c000 {			/* 0x4847c000, ap 43 04.0 */
-			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			reg = <0x7c000 0x4>,
-			      <0x7c004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
-			clock-names = "fck", "ahclkx";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x7c000 0x2000>,
-				 <0x48454000 0x48454000 0x400000>;
-
-			mcasp8: mcasp@0 {
-				compatible = "ti,dra7-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x48454000 0x1000>;	/* L3 data port */
-				reg-names = "mpu","dat";
-				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx", "rx";
-				dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
-				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
-					 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
-				clock-names = "fck", "ahclkx";
-				status = "disabled";
-			};
-		};
-
-		target-module@80000 {			/* 0x48480000, ap 31 16.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x80020 0x4>;
-			reg-names = "rev";
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x80000 0x2000>;
-
-			dcan2: can@0 {
-				compatible = "ti,dra7-d_can";
-				reg = <0x0 0x2000>;
-				syscon-raminit = <&scm_conf 0x558 1>;
-				interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&sys_clkin1>;
-				status = "disabled";
-			};
-		};
-
-		target-module@84000 {			/* 0x48484000, ap 3 10.0 */
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x85200 0x4>,
-			      <0x85208 0x4>,
-			      <0x85204 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <0>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			ti,syss-mask = <1>;
-			clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x84000 0x4000>;
-			/*
-			 * Do not allow gating of cpsw clock as workaround
-			 * for errata i877. Keeping internal clock disabled
-			 * causes the device switching characteristics
-			 * to degrade over time and eventually fail to meet
-			 * the data manual delay time/skew specs.
-			 */
-			ti,no-idle;
-
-			mac_sw: switch@0 {
-				compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
-				reg = <0x0 0x4000>;
-				ranges = <0 0 0x4000>;
-				clocks = <&gmac_main_clk>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				syscon = <&scm_conf>;
-				status = "disabled";
-
-				interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "rx_thresh", "rx", "tx", "misc";
-
-				ethernet-ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					cpsw_port1: port@1 {
-						reg = <1>;
-						label = "port1";
-						mac-address = [ 00 00 00 00 00 00 ];
-						phys = <&phy_gmii_sel 1>;
-					};
-
-					cpsw_port2: port@2 {
-						reg = <2>;
-						label = "port2";
-						mac-address = [ 00 00 00 00 00 00 ];
-						phys = <&phy_gmii_sel 2>;
-					};
-				};
-
-				davinci_mdio_sw: mdio@1000 {
-					compatible = "ti,cpsw-mdio","ti,davinci_mdio";
-					clocks = <&gmac_main_clk>;
-					clock-names = "fck";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					bus_freq = <1000000>;
-					reg = <0x1000 0x100>;
-				};
-
-				cpts {
-					clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
-					clock-names = "cpts";
-				};
-			};
-		};
-	};
-};
-
-&l4_per3 {						/* 0x48800000 */
-	compatible = "ti,dra7-l4-per3", "simple-pm-bus";
-	power-domains = <&prm_l4per>;
-	clocks = <&l4per3_clkctrl DRA7_L4PER3_L4_PER3_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x48800000 0x800>,
-	      <0x48800800 0x800>,
-	      <0x48801000 0x400>,
-	      <0x48801400 0x400>,
-	      <0x48801800 0x400>;
-	reg-names = "ap", "la", "ia0", "ia1", "ia2";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x48800000 0x200000>;	/* segment 0 */
-
-	segment@0 {					/* 0x48800000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
-			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
-			 <0x00001400 0x00001400 0x000400>,	/* ap 3 */
-			 <0x00001800 0x00001800 0x000400>,	/* ap 4 */
-			 <0x00020000 0x00020000 0x001000>,	/* ap 5 */
-			 <0x00021000 0x00021000 0x001000>,	/* ap 6 */
-			 <0x00022000 0x00022000 0x001000>,	/* ap 7 */
-			 <0x00023000 0x00023000 0x001000>,	/* ap 8 */
-			 <0x00024000 0x00024000 0x001000>,	/* ap 9 */
-			 <0x00025000 0x00025000 0x001000>,	/* ap 10 */
-			 <0x00026000 0x00026000 0x001000>,	/* ap 11 */
-			 <0x00027000 0x00027000 0x001000>,	/* ap 12 */
-			 <0x00028000 0x00028000 0x001000>,	/* ap 13 */
-			 <0x00029000 0x00029000 0x001000>,	/* ap 14 */
-			 <0x0002a000 0x0002a000 0x001000>,	/* ap 15 */
-			 <0x0002b000 0x0002b000 0x001000>,	/* ap 16 */
-			 <0x0002c000 0x0002c000 0x001000>,	/* ap 17 */
-			 <0x0002d000 0x0002d000 0x001000>,	/* ap 18 */
-			 <0x0002e000 0x0002e000 0x001000>,	/* ap 19 */
-			 <0x0002f000 0x0002f000 0x001000>,	/* ap 20 */
-			 <0x00170000 0x00170000 0x010000>,	/* ap 21 */
-			 <0x00180000 0x00180000 0x001000>,	/* ap 22 */
-			 <0x00190000 0x00190000 0x010000>,	/* ap 23 */
-			 <0x001a0000 0x001a0000 0x001000>,	/* ap 24 */
-			 <0x001b0000 0x001b0000 0x010000>,	/* ap 25 */
-			 <0x001c0000 0x001c0000 0x001000>,	/* ap 26 */
-			 <0x001d0000 0x001d0000 0x010000>,	/* ap 27 */
-			 <0x001e0000 0x001e0000 0x001000>,	/* ap 28 */
-			 <0x00038000 0x00038000 0x001000>,	/* ap 29 */
-			 <0x00039000 0x00039000 0x001000>,	/* ap 30 */
-			 <0x0005c000 0x0005c000 0x001000>,	/* ap 31 */
-			 <0x0005d000 0x0005d000 0x001000>,	/* ap 32 */
-			 <0x0003a000 0x0003a000 0x001000>,	/* ap 33 */
-			 <0x0003b000 0x0003b000 0x001000>,	/* ap 34 */
-			 <0x0003c000 0x0003c000 0x001000>,	/* ap 35 */
-			 <0x0003d000 0x0003d000 0x001000>,	/* ap 36 */
-			 <0x0003e000 0x0003e000 0x001000>,	/* ap 37 */
-			 <0x0003f000 0x0003f000 0x001000>,	/* ap 38 */
-			 <0x00040000 0x00040000 0x001000>,	/* ap 39 */
-			 <0x00041000 0x00041000 0x001000>,	/* ap 40 */
-			 <0x00042000 0x00042000 0x001000>,	/* ap 41 */
-			 <0x00043000 0x00043000 0x001000>,	/* ap 42 */
-			 <0x00044000 0x00044000 0x001000>,	/* ap 43 */
-			 <0x00045000 0x00045000 0x001000>,	/* ap 44 */
-			 <0x00046000 0x00046000 0x001000>,	/* ap 45 */
-			 <0x00047000 0x00047000 0x001000>,	/* ap 46 */
-			 <0x00048000 0x00048000 0x001000>,	/* ap 47 */
-			 <0x00049000 0x00049000 0x001000>,	/* ap 48 */
-			 <0x0004a000 0x0004a000 0x001000>,	/* ap 49 */
-			 <0x0004b000 0x0004b000 0x001000>,	/* ap 50 */
-			 <0x0004c000 0x0004c000 0x001000>,	/* ap 51 */
-			 <0x0004d000 0x0004d000 0x001000>,	/* ap 52 */
-			 <0x0004e000 0x0004e000 0x001000>,	/* ap 53 */
-			 <0x0004f000 0x0004f000 0x001000>,	/* ap 54 */
-			 <0x00050000 0x00050000 0x001000>,	/* ap 55 */
-			 <0x00051000 0x00051000 0x001000>,	/* ap 56 */
-			 <0x00052000 0x00052000 0x001000>,	/* ap 57 */
-			 <0x00053000 0x00053000 0x001000>,	/* ap 58 */
-			 <0x00054000 0x00054000 0x001000>,	/* ap 59 */
-			 <0x00055000 0x00055000 0x001000>,	/* ap 60 */
-			 <0x00056000 0x00056000 0x001000>,	/* ap 61 */
-			 <0x00057000 0x00057000 0x001000>,	/* ap 62 */
-			 <0x00058000 0x00058000 0x001000>,	/* ap 63 */
-			 <0x00059000 0x00059000 0x001000>,	/* ap 64 */
-			 <0x0005a000 0x0005a000 0x001000>,	/* ap 65 */
-			 <0x0005b000 0x0005b000 0x001000>,	/* ap 66 */
-			 <0x00064000 0x00064000 0x001000>,	/* ap 67 */
-			 <0x00065000 0x00065000 0x001000>,	/* ap 68 */
-			 <0x0005e000 0x0005e000 0x001000>,	/* ap 69 */
-			 <0x0005f000 0x0005f000 0x001000>,	/* ap 70 */
-			 <0x00060000 0x00060000 0x001000>,	/* ap 71 */
-			 <0x00061000 0x00061000 0x001000>,	/* ap 72 */
-			 <0x00062000 0x00062000 0x001000>,	/* ap 73 */
-			 <0x00063000 0x00063000 0x001000>,	/* ap 74 */
-			 <0x00140000 0x00140000 0x020000>,	/* ap 75 */
-			 <0x00160000 0x00160000 0x001000>,	/* ap 76 */
-			 <0x00016000 0x00016000 0x001000>,	/* ap 77 */
-			 <0x00017000 0x00017000 0x001000>,	/* ap 78 */
-			 <0x000c0000 0x000c0000 0x020000>,	/* ap 79 */
-			 <0x000e0000 0x000e0000 0x001000>,	/* ap 80 */
-			 <0x00004000 0x00004000 0x001000>,	/* ap 81 */
-			 <0x00005000 0x00005000 0x001000>,	/* ap 82 */
-			 <0x00080000 0x00080000 0x020000>,	/* ap 83 */
-			 <0x000a0000 0x000a0000 0x001000>,	/* ap 84 */
-			 <0x00100000 0x00100000 0x020000>,	/* ap 85 */
-			 <0x00120000 0x00120000 0x001000>,	/* ap 86 */
-			 <0x00010000 0x00010000 0x001000>,	/* ap 87 */
-			 <0x00011000 0x00011000 0x001000>,	/* ap 88 */
-			 <0x0000a000 0x0000a000 0x001000>,	/* ap 89 */
-			 <0x0000b000 0x0000b000 0x001000>,	/* ap 90 */
-			 <0x0001c000 0x0001c000 0x001000>,	/* ap 91 */
-			 <0x0001d000 0x0001d000 0x001000>,	/* ap 92 */
-			 <0x0001e000 0x0001e000 0x001000>,	/* ap 93 */
-			 <0x0001f000 0x0001f000 0x001000>,	/* ap 94 */
-			 <0x00002000 0x00002000 0x001000>,	/* ap 95 */
-			 <0x00003000 0x00003000 0x001000>;	/* ap 96 */
-
-		target-module@2000 {			/* 0x48802000, ap 95 7c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x2000 0x4>,
-			      <0x2010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX13_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2000 0x1000>;
-
-			mailbox13: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <12>;
-				status = "disabled";
-			};
-		};
-
-		target-module@4000 {			/* 0x48804000, ap 81 20.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-		};
-
-		target-module@a000 {			/* 0x4880a000, ap 89 18.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa000 0x1000>;
-		};
-
-		target-module@10000 {			/* 0x48810000, ap 87 28.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x10000 0x1000>;
-		};
-
-		target-module@16000 {			/* 0x48816000, ap 77 1e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x16000 0x1000>;
-		};
-
-		target-module@1c000 {			/* 0x4881c000, ap 91 1c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1c000 0x1000>;
-		};
-
-		target-module@1e000 {			/* 0x4881e000, ap 93 2c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1e000 0x1000>;
-		};
-
-		target-module@20000 {			/* 0x48820000, ap 5 08.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x20000 0x4>,
-			      <0x20010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
-			clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x20000 0x1000>;
-
-			timer5: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@22000 {			/* 0x48822000, ap 7 24.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x22000 0x4>,
-			      <0x22010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
-			clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x22000 0x1000>;
-
-			timer6: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@24000 {			/* 0x48824000, ap 9 26.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x24000 0x4>,
-			      <0x24010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
-			clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x24000 0x1000>;
-
-			timer7: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@26000 {			/* 0x48826000, ap 11 0c.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x26000 0x4>,
-			      <0x26010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
-			clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x26000 0x1000>;
-
-			timer8: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@28000 {			/* 0x48828000, ap 13 16.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x28000 0x4>,
-			      <0x28010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
-			clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x28000 0x1000>;
-
-			timer13: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-			};
-		};
-
-		target-module@2a000 {			/* 0x4882a000, ap 15 10.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x2a000 0x4>,
-			      <0x2a010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
-			clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2a000 0x1000>;
-
-			timer14: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-			};
-		};
-		timer15_target: target-module@2c000 {	/* 0x4882c000, ap 17 02.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x2c000 0x4>,
-			      <0x2c010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
-			clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2c000 0x1000>;
-
-			timer15: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-			};
-		};
-
-		timer16_target: target-module@2e000 {	/* 0x4882e000, ap 19 14.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x2e000 0x4>,
-			      <0x2e010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
-			clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2e000 0x1000>;
-
-			timer16: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>, <&timer_sys_clk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-			};
-		};
-
-		rtctarget: target-module@38000 {			/* 0x48838000, ap 29 12.0 */
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x38074 0x4>,
-			      <0x38078 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): rtc_pwrdm, rtc_clkdm */
-			clocks = <&rtc_clkctrl DRA7_RTC_RTCSS_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x38000 0x1000>;
-
-			rtc: rtc@0 {
-				compatible = "ti,am3352-rtc";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&sys_32k_ck>;
-			};
-		};
-
-		target-module@3a000 {			/* 0x4883a000, ap 33 3e.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x3a000 0x4>,
-			      <0x3a010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3a000 0x1000>;
-
-			mailbox2: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <12>;
-				status = "disabled";
-			};
-		};
-
-		target-module@3c000 {			/* 0x4883c000, ap 35 3a.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x3c000 0x4>,
-			      <0x3c010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3c000 0x1000>;
-
-			mailbox3: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <12>;
-				status = "disabled";
-			};
-		};
-
-		target-module@3e000 {			/* 0x4883e000, ap 37 46.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x3e000 0x4>,
-			      <0x3e010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3e000 0x1000>;
-
-			mailbox4: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <12>;
-				status = "disabled";
-			};
-		};
-
-		target-module@40000 {			/* 0x48840000, ap 39 64.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x40000 0x4>,
-			      <0x40010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x40000 0x1000>;
-
-			mailbox5: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <12>;
-				status = "disabled";
-			};
-		};
-
-		target-module@42000 {			/* 0x48842000, ap 41 4e.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x42000 0x4>,
-			      <0x42010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX6_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x42000 0x1000>;
-
-			mailbox6: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <12>;
-				status = "disabled";
-			};
-		};
-
-		target-module@44000 {			/* 0x48844000, ap 43 42.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x44000 0x4>,
-			      <0x44010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX7_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x44000 0x1000>;
-
-			mailbox7: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <12>;
-				status = "disabled";
-			};
-		};
-
-		target-module@46000 {			/* 0x48846000, ap 45 48.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x46000 0x4>,
-			      <0x46010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX8_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x46000 0x1000>;
-
-			mailbox8: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <12>;
-				status = "disabled";
-			};
-		};
-
-		target-module@48000 {			/* 0x48848000, ap 47 36.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48000 0x1000>;
-		};
-
-		target-module@4a000 {			/* 0x4884a000, ap 49 38.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4a000 0x1000>;
-		};
-
-		target-module@4c000 {			/* 0x4884c000, ap 51 44.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4c000 0x1000>;
-		};
-
-		target-module@4e000 {			/* 0x4884e000, ap 53 4c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4e000 0x1000>;
-		};
-
-		target-module@50000 {			/* 0x48850000, ap 55 40.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x50000 0x1000>;
-		};
-
-		target-module@52000 {			/* 0x48852000, ap 57 54.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x52000 0x1000>;
-		};
-
-		target-module@54000 {			/* 0x48854000, ap 59 1a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x54000 0x1000>;
-		};
-
-		target-module@56000 {			/* 0x48856000, ap 61 22.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x56000 0x1000>;
-		};
-
-		target-module@58000 {			/* 0x48858000, ap 63 2a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x58000 0x1000>;
-		};
-
-		target-module@5a000 {			/* 0x4885a000, ap 65 5c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5a000 0x1000>;
-		};
-
-		target-module@5c000 {			/* 0x4885c000, ap 31 32.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5c000 0x1000>;
-		};
-
-		target-module@5e000 {			/* 0x4885e000, ap 69 6c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x5e000 0x4>,
-			      <0x5e010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX9_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5e000 0x1000>;
-
-			mailbox9: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <12>;
-				status = "disabled";
-			};
-		};
-
-		target-module@60000 {			/* 0x48860000, ap 71 4a.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x60000 0x4>,
-			      <0x60010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX10_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x60000 0x1000>;
-
-			mailbox10: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <12>;
-				status = "disabled";
-			};
-		};
-
-		target-module@62000 {			/* 0x48862000, ap 73 74.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x62000 0x4>,
-			      <0x62010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX11_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x62000 0x1000>;
-
-			mailbox11: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <12>;
-				status = "disabled";
-			};
-		};
-
-		target-module@64000 {			/* 0x48864000, ap 67 52.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x64000 0x4>,
-			      <0x64010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX12_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x64000 0x1000>;
-
-			mailbox12: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <4>;
-				ti,mbox-num-fifos = <12>;
-				status = "disabled";
-			};
-		};
-
-		target-module@80000 {			/* 0x48880000, ap 83 0e.1 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x80000 0x4>,
-			      <0x80010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x80000 0x20000>;
-
-			omap_dwc3_1: omap_dwc3_1@0 {
-				compatible = "ti,dwc3";
-				reg = <0x0 0x10000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				utmi-mode = <2>;
-				ranges = <0 0 0x20000>;
-
-				usb1: usb@10000 {
-					compatible = "snps,dwc3";
-					reg = <0x10000 0x17000>;
-					interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "peripheral",
-							  "host",
-							  "otg";
-					phys = <&usb2_phy1>, <&usb3_phy1>;
-					phy-names = "usb2-phy", "usb3-phy";
-					maximum-speed = "super-speed";
-					dr_mode = "otg";
-					snps,dis_u3_susphy_quirk;
-					snps,dis_u2_susphy_quirk;
-				};
-			};
-		};
-
-		target-module@c0000 {			/* 0x488c0000, ap 79 06.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xc0000 0x4>,
-			      <0xc0010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc0000 0x20000>;
-
-			omap_dwc3_2: omap_dwc3_2@0 {
-				compatible = "ti,dwc3";
-				reg = <0x0 0x10000>;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				utmi-mode = <2>;
-				ranges = <0 0 0x20000>;
-
-				usb2: usb@10000 {
-					compatible = "snps,dwc3";
-					reg = <0x10000 0x17000>;
-					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "peripheral",
-							  "host",
-							  "otg";
-					phys = <&usb2_phy2>;
-					phy-names = "usb2-phy";
-					maximum-speed = "high-speed";
-					dr_mode = "otg";
-					snps,dis_u3_susphy_quirk;
-					snps,dis_u2_susphy_quirk;
-					snps,dis_metastability_quirk;
-				};
-			};
-		};
-
-		usb3_tm: target-module@100000 {		/* 0x48900000, ap 85 04.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x100000 0x4>,
-			      <0x100010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x100000 0x20000>;
-
-			omap_dwc3_3: omap_dwc3_3@0 {
-				compatible = "ti,dwc3";
-				reg = <0x0 0x10000>;
-				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				utmi-mode = <2>;
-				ranges = <0 0 0x20000>;
-				status = "disabled";
-
-				usb3: usb@10000 {
-					compatible = "snps,dwc3";
-					reg = <0x10000 0x17000>;
-					interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "peripheral",
-							  "host",
-							  "otg";
-					maximum-speed = "high-speed";
-					dr_mode = "otg";
-					snps,dis_u3_susphy_quirk;
-					snps,dis_u2_susphy_quirk;
-				};
-			};
-		};
-
-		target-module@170000 {			/* 0x48970000, ap 21 0a.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x170010 0x4>;
-			reg-names = "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x170000 0x10000>;
-			status = "disabled";
-		};
-
-		target-module@190000 {			/* 0x48990000, ap 23 2e.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x190010 0x4>;
-			reg-names = "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x190000 0x10000>;
-			status = "disabled";
-		};
-
-		target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x1b0000 0x4>,
-			      <0x1b0010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1b0000 0x10000>;
-			status = "disabled";
-		};
-
-		target-module@1d0010 {			/* 0x489d0000, ap 27 30.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x1d0010 0x4>;
-			reg-names = "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			power-domains = <&prm_vpe>;
-			clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1d0000 0x10000>;
-
-			vpe: vpe@0 {
-				compatible = "ti,dra7-vpe";
-				reg = <0x0000 0x120>,
-				      <0x0700 0x80>,
-				      <0x5700 0x18>,
-				      <0xd000 0x400>;
-				reg-names = "vpe_top",
-					    "sc",
-					    "csc",
-					    "vpdma";
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-	};
-};
-
-&l4_wkup {						/* 0x4ae00000 */
-	compatible = "ti,dra7-l4-wkup", "simple-pm-bus";
-	power-domains = <&prm_wkupaon>;
-	clocks = <&wkupaon_clkctrl DRA7_WKUPAON_L4_WKUP_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x4ae00000 0x800>,
-	      <0x4ae00800 0x800>,
-	      <0x4ae01000 0x1000>;
-	reg-names = "ap", "la", "ia0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x4ae00000 0x010000>,	/* segment 0 */
-		 <0x00010000 0x4ae10000 0x010000>,	/* segment 1 */
-		 <0x00020000 0x4ae20000 0x010000>,	/* segment 2 */
-		 <0x00030000 0x4ae30000 0x010000>;	/* segment 3 */
-
-	segment@0 {					/* 0x4ae00000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
-			 <0x00006000 0x00006000 0x002000>,	/* ap 3 */
-			 <0x00008000 0x00008000 0x001000>,	/* ap 4 */
-			 <0x00004000 0x00004000 0x001000>,	/* ap 15 */
-			 <0x00005000 0x00005000 0x001000>,	/* ap 16 */
-			 <0x0000c000 0x0000c000 0x001000>,	/* ap 17 */
-			 <0x0000d000 0x0000d000 0x001000>;	/* ap 18 */
-
-		target-module@4000 {			/* 0x4ae04000, ap 15 40.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4000 0x4>,
-			      <0x4010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
-			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_COUNTER_32K_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-
-			counter32k: counter@0 {
-				compatible = "ti,omap-counter32k";
-				reg = <0x0 0x40>;
-			};
-		};
-
-		target-module@6000 {			/* 0x4ae06000, ap 3 10.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x6000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6000 0x2000>;
-
-			prm: prm@0 {
-				compatible = "ti,dra7-prm", "simple-bus";
-				reg = <0 0x3000>;
-				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x3000>;
-
-				prm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prm_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		target-module@c000 {			/* 0x4ae0c000, ap 17 50.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xc000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc000 0x1000>;
-
-			scm_wkup: scm_conf@0 {
-				compatible = "syscon";
-				reg = <0 0x1000>;
-			};
-		};
-	};
-
-	segment@10000 {					/* 0x4ae10000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
-			 <0x00001000 0x00011000 0x001000>,	/* ap 6 */
-			 <0x00004000 0x00014000 0x001000>,	/* ap 7 */
-			 <0x00005000 0x00015000 0x001000>,	/* ap 8 */
-			 <0x00008000 0x00018000 0x001000>,	/* ap 9 */
-			 <0x00009000 0x00019000 0x001000>,	/* ap 10 */
-			 <0x0000c000 0x0001c000 0x001000>,	/* ap 11 */
-			 <0x0000d000 0x0001d000 0x001000>;	/* ap 12 */
-
-		target-module@0 {			/* 0x4ae10000, ap 5 20.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x0 0x4>,
-			      <0x10 0x4>,
-			      <0x114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
-			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_GPIO1_CLKCTRL 0>,
-				 <&wkupaon_clkctrl DRA7_WKUPAON_GPIO1_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x1000>;
-
-			gpio1: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@4000 {			/* 0x4ae14000, ap 7 28.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4000 0x4>,
-			      <0x4010 0x4>,
-			      <0x4014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
-			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_WD_TIMER2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-
-			wdt2: wdt@0 {
-				compatible = "ti,omap3-wdt";
-				reg = <0x0 0x80>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		timer1_target: target-module@8000 {	/* 0x4ae18000, ap 9 30.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x8000 0x4>,
-			      <0x8010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
-			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8000 0x1000>;
-
-			timer1: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
-				clock-names = "fck";
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-alwon;
-			};
-		};
-
-		target-module@c000 {			/* 0x4ae1c000, ap 11 38.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc000 0x1000>;
-		};
-	};
-
-	segment@20000 {					/* 0x4ae20000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
-			 <0x0000a000 0x0002a000 0x001000>,	/* ap 14 */
-			 <0x00000000 0x00020000 0x001000>,	/* ap 19 */
-			 <0x00001000 0x00021000 0x001000>,	/* ap 20 */
-			 <0x00002000 0x00022000 0x001000>,	/* ap 21 */
-			 <0x00003000 0x00023000 0x001000>,	/* ap 22 */
-			 <0x00007000 0x00027000 0x000400>,	/* ap 23 */
-			 <0x00008000 0x00028000 0x000800>,	/* ap 24 */
-			 <0x00009000 0x00029000 0x000100>,	/* ap 25 */
-			 <0x00008800 0x00028800 0x000200>,	/* ap 26 */
-			 <0x00008a00 0x00028a00 0x000100>,	/* ap 27 */
-			 <0x0000b000 0x0002b000 0x001000>,	/* ap 28 */
-			 <0x0000c000 0x0002c000 0x001000>,	/* ap 29 */
-			 <0x0000f000 0x0002f000 0x001000>;	/* ap 32 */
-
-		target-module@0 {			/* 0x4ae20000, ap 19 08.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x0 0x4>,
-			      <0x10 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
-			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER12_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x1000>;
-
-			timer12: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-alwon;
-				ti,timer-secure;
-			};
-		};
-
-		target-module@2000 {			/* 0x4ae22000, ap 21 18.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2000 0x1000>;
-		};
-
-		target-module@6000 {			/* 0x4ae26000, ap 13 48.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00006000 0x00001000>,
-				 <0x00001000 0x00007000 0x00000400>,
-				 <0x00002000 0x00008000 0x00000800>,
-				 <0x00002800 0x00008800 0x00000200>,
-				 <0x00002a00 0x00008a00 0x00000100>,
-				 <0x00003000 0x00009000 0x00000100>;
-		};
-
-		target-module@b000 {			/* 0x4ae2b000, ap 28 02.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xb050 0x4>,
-			      <0xb054 0x4>,
-			      <0xb058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
-			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_UART10_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb000 0x1000>;
-
-			uart10: serial@0 {
-				compatible = "ti,dra742-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-				status = "disabled";
-			};
-		};
-
-		target-module@f000 {			/* 0x4ae2f000, ap 32 58.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xf000 0x1000>;
-		};
-	};
-
-	segment@30000 {					/* 0x4ae30000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0000c000 0x0003c000 0x002000>,	/* ap 30 */
-			 <0x0000e000 0x0003e000 0x001000>,	/* ap 31 */
-			 <0x00000000 0x00030000 0x001000>,	/* ap 33 */
-			 <0x00001000 0x00031000 0x001000>,	/* ap 34 */
-			 <0x00002000 0x00032000 0x001000>,	/* ap 35 */
-			 <0x00003000 0x00033000 0x001000>,	/* ap 36 */
-			 <0x00004000 0x00034000 0x001000>,	/* ap 37 */
-			 <0x00005000 0x00035000 0x001000>,	/* ap 38 */
-			 <0x00006000 0x00036000 0x001000>,	/* ap 39 */
-			 <0x00007000 0x00037000 0x001000>,	/* ap 40 */
-			 <0x00008000 0x00038000 0x001000>,	/* ap 41 */
-			 <0x00009000 0x00039000 0x001000>,	/* ap 42 */
-			 <0x0000a000 0x0003a000 0x001000>;	/* ap 43 */
-
-		target-module@1000 {			/* 0x4ae31000, ap 34 60.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1000 0x1000>;
-		};
-
-		target-module@3000 {			/* 0x4ae33000, ap 36 0a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3000 0x1000>;
-		};
-
-		target-module@5000 {			/* 0x4ae35000, ap 38 0c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5000 0x1000>;
-		};
-
-		target-module@7000 {			/* 0x4ae37000, ap 40 68.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x7000 0x1000>;
-		};
-
-		target-module@9000 {			/* 0x4ae39000, ap 42 70.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x9000 0x1000>;
-		};
-
-		target-module@c000 {			/* 0x4ae3c000, ap 30 04.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xc020 0x4>;
-			reg-names = "rev";
-			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc000 0x2000>;
-
-			dcan1: can@0 {
-				compatible = "ti,dra7-d_can";
-				reg = <0x0 0x2000>;
-				syscon-raminit = <&scm_conf 0x558 0>;
-				interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 24>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi
deleted file mode 100644
index aa09472665269..0000000000000
--- a/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * MMC IOdelay values for TI's DRA7xx SoCs.
- * Copyright (C) 2018 Texas Instruments
- * Author: Kishon Vijay Abraham I <kishon@ti.com>
- */
-
-&dra7_pmx_core {
-	mmc1_pins_default_no_clk_pu: mmc1_pins_default_no_clk_pu {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
deleted file mode 100644
index 97ce0c4f1df7e..0000000000000
--- a/arch/arm/boot/dts/dra7.dtsi
+++ /dev/null
@@ -1,1358 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Based on "omap4.dtsi"
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/clock/dra7.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/dra.h>
-#include <dt-bindings/clock/dra7.h>
-
-#define MAX_SOURCES 400
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	compatible = "ti,dra7xx";
-	interrupt-parent = <&crossbar_mpu>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		i2c4 = &i2c5;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		serial6 = &uart7;
-		serial7 = &uart8;
-		serial8 = &uart9;
-		serial9 = &uart10;
-		ethernet0 = &cpsw_port1;
-		ethernet1 = &cpsw_port2;
-		d_can0 = &dcan1;
-		d_can1 = &dcan2;
-		spi0 = &qspi;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		status = "disabled";	/* See ARM architected timer wrap erratum i940 */
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-		interrupt-parent = <&gic>;
-	};
-
-	gic: interrupt-controller@48211000 {
-		compatible = "arm,cortex-a15-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x0 0x48211000 0x0 0x1000>,
-		      <0x0 0x48212000 0x0 0x2000>,
-		      <0x0 0x48214000 0x0 0x2000>,
-		      <0x0 0x48216000 0x0 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-		interrupt-parent = <&gic>;
-	};
-
-	wakeupgen: interrupt-controller@48281000 {
-		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x0 0x48281000 0x0 0x1000>;
-		interrupt-parent = <&gic>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-
-			/* cooling options */
-			#cooling-cells = <2>; /* min followed by max */
-
-			vbb-supply = <&abb_mpu>;
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2-ti-cpu";
-		syscon = <&scm_wkup>;
-
-		opp_nom-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1060000 850000 1150000>,
-					<1060000 850000 1150000>;
-			opp-supported-hw = <0xFF 0x01>;
-			opp-suspend;
-		};
-
-		opp_od-1176000000 {
-			opp-hz = /bits/ 64 <1176000000>;
-			opp-microvolt = <1160000 885000 1160000>,
-					<1160000 885000 1160000>;
-
-			opp-supported-hw = <0xFF 0x02>;
-		};
-
-		opp_high@1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1210000 950000 1250000>,
-					<1210000 950000 1250000>;
-			opp-supported-hw = <0xFF 0x04>;
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the SOC interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp: ocp {
-		compatible = "simple-pm-bus";
-		power-domains = <&prm_core>;
-		clocks = <&l3main1_clkctrl DRA7_L3MAIN1_L3_MAIN_1_CLKCTRL 0>,
-			 <&l3instr_clkctrl DRA7_L3INSTR_L3_MAIN_2_CLKCTRL 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x0 0xc0000000>;
-		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
-
-		l3-noc@44000000 {
-			compatible = "ti,dra7-l3-noc";
-			reg = <0x44000000 0x1000>,
-			      <0x45000000 0x1000>;
-			interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-					      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		l4_cfg: interconnect@4a000000 {
-		};
-		l4_wkup: interconnect@4ae00000 {
-		};
-		l4_per1: interconnect@48000000 {
-		};
-
-		target-module@48210000 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			power-domains = <&prm_mpu>;
-			clocks = <&mpu_clkctrl DRA7_MPU_MPU_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48210000 0x1f0000>;
-
-			mpu {
-				compatible = "ti,omap5-mpu";
-			};
-		};
-
-		l4_per2: interconnect@48400000 {
-		};
-		l4_per3: interconnect@48800000 {
-		};
-
-		/*
-		 * Register access seems to have complex dependencies and also
-		 * seems to need an enabled phy. See the TRM chapter for "Table
-		 * 26-678. Main Sequence PCIe Controller Global Initialization"
-		 * and also dra7xx_pcie_probe().
-		 */
-		axi0: target-module@51000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			power-domains = <&prm_l3init>;
-			resets = <&prm_l3init 0>;
-			reset-names = "rstctrl";
-			clocks = <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 0>,
-				 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>,
-				 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>;
-			clock-names = "fck", "phy-clk", "phy-clk-div";
-			#size-cells = <1>;
-			#address-cells = <1>;
-			ranges = <0x51000000 0x51000000 0x3000>,
-				 <0x20000000 0x20000000 0x10000000>;
-			dma-ranges;
-			/**
-			 * To enable PCI endpoint mode, disable the pcie1_rc
-			 * node and enable pcie1_ep mode.
-			 */
-			pcie1_rc: pcie@51000000 {
-				reg = <0x51000000 0x2000>,
-				      <0x51002000 0x14c>,
-				      <0x20001000 0x2000>;
-				reg-names = "rc_dbics", "ti_conf", "config";
-				interrupts = <0 232 0x4>, <0 233 0x4>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				device_type = "pci";
-				ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>,
-					 <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>;
-				bus-range = <0x00 0xff>;
-				#interrupt-cells = <1>;
-				num-lanes = <1>;
-				linux,pci-domain = <0>;
-				phys = <&pcie1_phy>;
-				phy-names = "pcie-phy0";
-				ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 1>,
-						<0 0 0 2 &pcie1_intc 2>,
-						<0 0 0 3 &pcie1_intc 3>,
-						<0 0 0 4 &pcie1_intc 4>;
-				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
-				status = "disabled";
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#address-cells = <0>;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie1_ep: pcie_ep@51000000 {
-				reg = <0x51000000 0x28>,
-				      <0x51002000 0x14c>,
-				      <0x51001000 0x28>,
-				      <0x20001000 0x10000000>;
-				reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
-				interrupts = <0 232 0x4>;
-				num-lanes = <1>;
-				num-ib-windows = <4>;
-				num-ob-windows = <16>;
-				phys = <&pcie1_phy>;
-				phy-names = "pcie-phy0";
-				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
-				ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
-				status = "disabled";
-			};
-		};
-
-		/*
-		 * Register access seems to have complex dependencies and also
-		 * seems to need an enabled phy. See the TRM chapter for "Table
-		 * 26-678. Main Sequence PCIe Controller Global Initialization"
-		 * and also dra7xx_pcie_probe().
-		 */
-		axi1: target-module@51800000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			clocks = <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 0>,
-				 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>,
-				 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>;
-			clock-names = "fck", "phy-clk", "phy-clk-div";
-			power-domains = <&prm_l3init>;
-			resets = <&prm_l3init 1>;
-			reset-names = "rstctrl";
-			#size-cells = <1>;
-			#address-cells = <1>;
-			ranges = <0x51800000 0x51800000 0x3000>,
-				 <0x30000000 0x30000000 0x10000000>;
-			dma-ranges;
-			status = "disabled";
-			pcie2_rc: pcie@51800000 {
-				reg = <0x51800000 0x2000>,
-				      <0x51802000 0x14c>,
-				      <0x30001000 0x2000>;
-				reg-names = "rc_dbics", "ti_conf", "config";
-				interrupts = <0 355 0x4>, <0 356 0x4>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				device_type = "pci";
-				ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>,
-					 <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>;
-				bus-range = <0x00 0xff>;
-				#interrupt-cells = <1>;
-				num-lanes = <1>;
-				linux,pci-domain = <1>;
-				phys = <&pcie2_phy>;
-				phy-names = "pcie-phy0";
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie2_intc 1>,
-						<0 0 0 2 &pcie2_intc 2>,
-						<0 0 0 3 &pcie2_intc 3>,
-						<0 0 0 4 &pcie2_intc 4>;
-				ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
-				pcie2_intc: interrupt-controller {
-					interrupt-controller;
-					#address-cells = <0>;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		ocmcram1: ocmcram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x80000>;
-			ranges = <0x0 0x40300000 0x80000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/*
-			 * This is a placeholder for an optional reserved
-			 * region for use by secure software. The size
-			 * of this region is not known until runtime so it
-			 * is set as zero to either be updated to reserve
-			 * space or left unchanged to leave all SRAM for use.
-			 * On HS parts that that require the reserved region
-			 * either the bootloader can update the size to
-			 * the required amount or the node can be overridden
-			 * from the board dts file for the secure platform.
-			 */
-			sram-hs@0 {
-				compatible = "ti,secure-ram";
-				reg = <0x0 0x0>;
-			};
-		};
-
-		/*
-		 * NOTE: ocmcram2 and ocmcram3 are not available on all
-		 * DRA7xx and AM57xx variants. Confirm availability in
-		 * the data manual for the exact part number in use
-		 * before enabling these nodes in the board dts file.
-		 */
-		ocmcram2: ocmcram@40400000 {
-			status = "disabled";
-			compatible = "mmio-sram";
-			reg = <0x40400000 0x100000>;
-			ranges = <0x0 0x40400000 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-
-		ocmcram3: ocmcram@40500000 {
-			status = "disabled";
-			compatible = "mmio-sram";
-			reg = <0x40500000 0x100000>;
-			ranges = <0x0 0x40500000 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-
-		bandgap: bandgap@4a0021e0 {
-			reg = <0x4a0021e0 0xc
-				0x4a00232c 0xc
-				0x4a002380 0x2c
-				0x4a0023C0 0x3c
-				0x4a002564 0x8
-				0x4a002574 0x50>;
-				compatible = "ti,dra752-bandgap";
-				interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-				#thermal-sensor-cells = <1>;
-		};
-
-		dsp1_system: dsp_system@40d00000 {
-			compatible = "syscon";
-			reg = <0x40d00000 0x100>;
-		};
-
-		dra7_iodelay_core: padconf@4844a000 {
-			compatible = "ti,dra7-iodelay";
-			reg = <0x4844a000 0x0d1c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pinctrl-cells = <2>;
-		};
-
-		target-module@43300000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x43300000 0x4>,
-			      <0x43300010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x43300000 0x100000>;
-
-			edma: dma@0 {
-				compatible = "ti,edma3-tpcc";
-				reg = <0 0x100000>;
-				reg-names = "edma3_cc";
-				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "edma3_ccint", "edma3_mperr",
-						  "edma3_ccerrint";
-				dma-requests = <64>;
-				#dma-cells = <2>;
-
-				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
-
-				/*
-				* memcpy is disabled, can be enabled with:
-				* ti,edma-memcpy-channels = <20 21>;
-				* for example. Note that these channels need to be
-				* masked in the xbar as well.
-				*/
-			};
-		};
-
-		target-module@43400000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x43400000 0x4>,
-			      <0x43400010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x43400000 0x100000>;
-
-			edma_tptc0: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@43500000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x43500000 0x4>,
-			      <0x43500010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x43500000 0x100000>;
-
-			edma_tptc1: dma@0 {
-				compatible = "ti,edma3-tptc";
-				reg = <0 0x100000>;
-				interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "edma3_tcerrint";
-			};
-		};
-
-		target-module@4e000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4e000000 0x4>,
-			      <0x4e000010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ranges = <0x0 0x4e000000 0x2000000>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			dmm@0 {
-				compatible = "ti,omap5-dmm";
-				reg = <0 0x800>;
-				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		ipu1: ipu@58820000 {
-			compatible = "ti,dra7-ipu";
-			reg = <0x58820000 0x10000>;
-			reg-names = "l2ram";
-			iommus = <&mmu_ipu1>;
-			status = "disabled";
-			resets = <&prm_ipu 0>, <&prm_ipu 1>;
-			clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
-			firmware-name = "dra7-ipu1-fw.xem4";
-		};
-
-		ipu2: ipu@55020000 {
-			compatible = "ti,dra7-ipu";
-			reg = <0x55020000 0x10000>;
-			reg-names = "l2ram";
-			iommus = <&mmu_ipu2>;
-			status = "disabled";
-			resets = <&prm_core 0>, <&prm_core 1>;
-			clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
-			firmware-name = "dra7-ipu2-fw.xem4";
-		};
-
-		dsp1: dsp@40800000 {
-			compatible = "ti,dra7-dsp";
-			reg = <0x40800000 0x48000>,
-			      <0x40e00000 0x8000>,
-			      <0x40f00000 0x8000>;
-			reg-names = "l2ram", "l1pram", "l1dram";
-			ti,bootreg = <&scm_conf 0x55c 10>;
-			iommus = <&mmu0_dsp1>, <&mmu1_dsp1>;
-			status = "disabled";
-			resets = <&prm_dsp1 0>;
-			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
-			firmware-name = "dra7-dsp1-fw.xe66";
-		};
-
-		target-module@40d01000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x40d01000 0x4>,
-			      <0x40d01010 0x4>,
-			      <0x40d01014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
-			clock-names = "fck";
-			resets = <&prm_dsp1 1>;
-			reset-names = "rstctrl";
-			ranges = <0x0 0x40d01000 0x1000>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			mmu0_dsp1: mmu@0 {
-				compatible = "ti,dra7-dsp-iommu";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				#iommu-cells = <0>;
-				ti,syscon-mmuconfig = <&dsp1_system 0x0>;
-			};
-		};
-
-		target-module@40d02000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x40d02000 0x4>,
-			      <0x40d02010 0x4>,
-			      <0x40d02014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
-			clock-names = "fck";
-			resets = <&prm_dsp1 1>;
-			reset-names = "rstctrl";
-			ranges = <0x0 0x40d02000 0x1000>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			mmu1_dsp1: mmu@0 {
-				compatible = "ti,dra7-dsp-iommu";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-				#iommu-cells = <0>;
-				ti,syscon-mmuconfig = <&dsp1_system 0x1>;
-			};
-		};
-
-		target-module@58882000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x58882000 0x4>,
-			      <0x58882010 0x4>,
-			      <0x58882014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
-			clock-names = "fck";
-			resets = <&prm_ipu 2>;
-			reset-names = "rstctrl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x58882000 0x100>;
-
-			mmu_ipu1: mmu@0 {
-				compatible = "ti,dra7-iommu";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
-				#iommu-cells = <0>;
-				ti,iommu-bus-err-back;
-			};
-		};
-
-		target-module@55082000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x55082000 0x4>,
-			      <0x55082010 0x4>,
-			      <0x55082014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
-			clock-names = "fck";
-			resets = <&prm_core 2>;
-			reset-names = "rstctrl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x55082000 0x100>;
-
-			mmu_ipu2: mmu@0 {
-				compatible = "ti,dra7-iommu";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
-				#iommu-cells = <0>;
-				ti,iommu-bus-err-back;
-			};
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_mpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
-			      <0x4ae06014 0x4>, <0x4a003b20 0xc>,
-			      <0x4ae0c158 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x80>;
-			/* LDOVBBMPU_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBMPU_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1060000		0	0x0	0 0x02000000 0x01F00000
-			1160000		0	0x4	0 0x02000000 0x01F00000
-			1210000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_ivahd: regulator-abb-ivahd {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_ivahd";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
-			      <0x4a002470 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x40000000>;
-			/* LDOVBBIVA_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBIVA_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1055000		0	0x0	0 0x02000000 0x01F00000
-			1150000		0	0x4	0 0x02000000 0x01F00000
-			1250000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_dspeve: regulator-abb-dspeve {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_dspeve";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
-			      <0x4a00246c 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x20000000>;
-			/* LDOVBBDSPEVE_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBDSPEVE_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1055000		0	0x0	0 0x02000000 0x01F00000
-			1150000		0	0x4	0 0x02000000 0x01F00000
-			1250000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_gpu: regulator-abb-gpu {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_gpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
-			      <0x4ae06010 0x4>, <0x4a003b08 0xc>,
-			      <0x4ae0c154 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x10000000>;
-			/* LDOVBBGPU_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBGPU_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1090000		0	0x0	0 0x02000000 0x01F00000
-			1210000		0	0x4	0 0x02000000 0x01F00000
-			1280000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		target-module@4b300000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x4b300000 0x4>,
-			      <0x4b300010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4b300000 0x1000>,
-				 <0x5c000000 0x5c000000 0x4000000>;
-
-			qspi: spi@0 {
-				compatible = "ti,dra7xxx-qspi";
-				reg = <0 0x100>,
-				      <0x5c000000 0x4000000>;
-				reg-names = "qspi_base", "qspi_mmap";
-				syscon-chipselects = <&scm_conf 0x558>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
-				clock-names = "fck";
-				num-cs = <4>;
-				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		/* OCP2SCP1 */
-		/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
-
-		target-module@50000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x50000000 4>,
-			      <0x50000010 4>,
-			      <0x50000014 4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_GPMC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
-				 <0x00000000 0x00000000 0x40000000>; /* data */
-
-			gpmc: gpmc@50000000 {
-				compatible = "ti,am3352-gpmc";
-				reg = <0x50000000 0x37c>;      /* device IO registers */
-				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&edma_xbar 4 0>;
-				dma-names = "rxtx";
-				gpmc,num-cs = <8>;
-				gpmc,num-waitpins = <2>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				status = "disabled";
-			};
-		};
-
-		target-module@56000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x5600fe00 0x4>,
-			      <0x5600fe10 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x56000000 0x2000000>;
-		};
-
-		crossbar_mpu: crossbar@4a002a48 {
-			compatible = "ti,irq-crossbar";
-			reg = <0x4a002a48 0x130>;
-			interrupt-controller;
-			interrupt-parent = <&wakeupgen>;
-			#interrupt-cells = <3>;
-			ti,max-irqs = <160>;
-			ti,max-crossbar-sources = <MAX_SOURCES>;
-			ti,reg-size = <2>;
-			ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
-			ti,irqs-skip = <10 133 139 140>;
-			ti,irqs-safe-map = <0>;
-		};
-
-		target-module@58000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x58000000 4>,
-			      <0x58000014 4>;
-			reg-names = "rev", "syss";
-			ti,syss-mask = <1>;
-			clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 0>,
-				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
-				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>,
-				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>;
-			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x58000000 0x800000>;
-
-			dss: dss@0 {
-				compatible = "ti,dra7-dss";
-				/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
-				/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
-				status = "disabled";
-				/* CTRL_CORE_DSS_PLL_CONTROL */
-				syscon-pll-ctrl = <&scm_conf 0x538>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x800000>;
-
-				target-module@1000 {
-					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x1000 0x4>,
-					      <0x1010 0x4>,
-					      <0x1014 0x4>;
-					reg-names = "rev", "sysc", "syss";
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-midle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-							 SYSC_OMAP2_ENAWAKEUP |
-							 SYSC_OMAP2_SOFTRESET |
-							 SYSC_OMAP2_AUTOIDLE)>;
-					ti,syss-mask = <1>;
-					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
-					clock-names = "fck";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x1000 0x1000>;
-
-					dispc@0 {
-						compatible = "ti,dra7-dispc";
-						reg = <0 0x1000>;
-						interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-						clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
-						clock-names = "fck";
-						/* CTRL_CORE_SMA_SW_1 */
-						syscon-pol = <&scm_conf 0x534>;
-					};
-				};
-
-				target-module@40000 {
-					compatible = "ti,sysc-omap4", "ti,sysc";
-					reg = <0x40000 0x4>,
-					      <0x40010 0x4>;
-					reg-names = "rev", "sysc";
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>,
-							<SYSC_IDLE_SMART_WKUP>;
-					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
-					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
-						 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
-					clock-names = "fck", "dss_clk";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x40000 0x40000>;
-
-					hdmi: encoder@0 {
-						compatible = "ti,dra7-hdmi";
-						reg = <0 0x200>,
-						      <0x200 0x80>,
-						      <0x300 0x80>,
-						      <0x20000 0x19000>;
-						reg-names = "wp", "pll", "phy", "core";
-						interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-						clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
-							 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
-						clock-names = "fck", "sys_clk";
-						dmas = <&sdma_xbar 76>;
-						dma-names = "audio_tx";
-					};
-				};
-			};
-		};
-
-		target-module@59000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x59000020 0x4>;
-			reg-names = "rev";
-			clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x59000000 0x1000>;
-
-			bb2d: gpu@0 {
-				compatible = "vivante,gc";
-				reg = <0x0 0x700>;
-				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
-				clock-names = "core";
-			};
-		};
-
-		aes1_target: target-module@4b500000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4b500080 0x4>,
-			      <0x4b500084 0x4>,
-			      <0x4b500088 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4sec_clkdm */
-			clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4b500000 0x1000>;
-
-			aes1: aes@0 {
-				compatible = "ti,omap4-aes";
-				reg = <0 0xa0>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
-				dma-names = "tx", "rx";
-				clocks = <&l3_iclk_div>;
-				clock-names = "fck";
-			};
-		};
-
-		aes2_target: target-module@4b700000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4b700080 0x4>,
-			      <0x4b700084 0x4>,
-			      <0x4b700088 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): per_pwrdm, l4sec_clkdm */
-			clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4b700000 0x1000>;
-
-			aes2: aes@0 {
-				compatible = "ti,omap4-aes";
-				reg = <0 0xa0>;
-				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
-				dma-names = "tx", "rx";
-				clocks = <&l3_iclk_div>;
-				clock-names = "fck";
-			};
-		};
-
-		sham1_target: target-module@4b101000 {
-			compatible = "ti,sysc-omap3-sham", "ti,sysc";
-			reg = <0x4b101100 0x4>,
-			      <0x4b101110 0x4>,
-			      <0x4b101114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
-			clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4b101000 0x1000>;
-
-			sham1: sham@0 {
-				compatible = "ti,omap5-sham";
-				reg = <0 0x300>;
-				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&edma_xbar 119 0>;
-				dma-names = "rx";
-				clocks = <&l3_iclk_div>;
-				clock-names = "fck";
-			};
-		};
-
-		sham2_target: target-module@42701000 {
-			compatible = "ti,sysc-omap3-sham", "ti,sysc";
-			reg = <0x42701100 0x4>,
-			      <0x42701110 0x4>,
-			      <0x42701114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
-			clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x42701000 0x1000>;
-
-			sham2: sham@0 {
-				compatible = "ti,omap5-sham";
-				reg = <0 0x300>;
-				interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&edma_xbar 165 0>;
-				dma-names = "rx";
-				clocks = <&l3_iclk_div>;
-				clock-names = "fck";
-			};
-		};
-
-		iva_hd_target: target-module@5a000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x5a05a400 0x4>,
-			      <0x5a05a410 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			power-domains = <&prm_iva>;
-			resets = <&prm_iva 2>;
-			reset-names = "rstctrl";
-			clocks = <&iva_clkctrl DRA7_IVA_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x5a000000 0x5a000000 0x1000000>,
-				 <0x5b000000 0x5b000000 0x1000000>;
-
-			iva {
-				compatible = "ti,ivahd";
-			};
-		};
-
-		opp_supply_mpu: opp-supply@4a003b20 {
-			compatible = "ti,omap5-opp-supply";
-			reg = <0x4a003b20 0xc>;
-			ti,efuse-settings = <
-			/* uV   offset */
-			1060000 0x0
-			1160000 0x4
-			1210000 0x8
-			>;
-			ti,absolute-max-voltage-uv = <1500000>;
-		};
-
-	};
-
-	thermal_zones: thermal-zones {
-		#include "omap4-cpu-thermal.dtsi"
-		#include "omap5-gpu-thermal.dtsi"
-		#include "omap5-core-thermal.dtsi"
-		#include "dra7-dspeve-thermal.dtsi"
-		#include "dra7-iva-thermal.dtsi"
-	};
-
-};
-
-&cpu_thermal {
-	polling-delay = <500>; /* milliseconds */
-	coefficients = <0 2000>;
-};
-
-&gpu_thermal {
-	coefficients = <0 2000>;
-};
-
-&core_thermal {
-	coefficients = <0 2000>;
-};
-
-&dspeve_thermal {
-	coefficients = <0 2000>;
-};
-
-&iva_thermal {
-	coefficients = <0 2000>;
-};
-
-&cpu_crit {
-	temperature = <120000>; /* milli Celsius */
-};
-
-&core_crit {
-	temperature = <120000>; /* milli Celsius */
-};
-
-&gpu_crit {
-	temperature = <120000>; /* milli Celsius */
-};
-
-&dspeve_crit {
-	temperature = <120000>; /* milli Celsius */
-};
-
-&iva_crit {
-	temperature = <120000>; /* milli Celsius */
-};
-
-#include "dra7-l4.dtsi"
-#include "dra7xx-clocks.dtsi"
-
-&prm {
-	prm_mpu: prm@300 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x300 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_dsp1: prm@400 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x400 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_ipu: prm@500 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x500 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_coreaon: prm@628 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x628 0xd8>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_core: prm@700 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x700 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_iva: prm@f00 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0xf00 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_cam: prm@1000 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1000 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_dss: prm@1100 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1100 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_gpu: prm@1200 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1200 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_l3init: prm@1300 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1300 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_l4per: prm@1400 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1400 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_custefuse: prm@1600 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1600 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_wkupaon: prm@1724 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1724 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_dsp2: prm@1b00 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1b00 0x40>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_eve1: prm@1b40 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1b40 0x40>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_eve2: prm@1b80 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1b80 0x40>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_eve3: prm@1bc0 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1bc0 0x40>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_eve4: prm@1c00 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1c00 0x60>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_rtc: prm@1c60 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1c60 0x20>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_vpe: prm@1c80 {
-		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1c80 0x80>;
-		#power-domain-cells = <0>;
-	};
-};
-
-/* Preferred always-on timer for clockevent */
-&timer1_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
-		assigned-clock-parents = <&sys_32k_ck>;
-	};
-};
-
-/* Local timers, see ARM architected timer wrap erratum i940 */
-&timer15_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
-		assigned-clock-parents = <&timer_sys_clk_div>;
-	};
-};
-
-&timer16_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
-		assigned-clock-parents = <&timer_sys_clk_div>;
-	};
-};
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
deleted file mode 100644
index a643644430315..0000000000000
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ /dev/null
@@ -1,316 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "dra71x.dtsi"
-#include "dra7-mmc-iodelay.dtsi"
-#include "dra72x-mmc-iodelay.dtsi"
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
-	compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7";
-	model = "TI DRA718 EVM";
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		ipu2_memory_region: ipu2-memory@95800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x95800000 0x0 0x3800000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp1_memory_region: dsp1-memory@99000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x99000000 0x0 0x4000000>;
-			reusable;
-			status = "okay";
-		};
-
-		ipu1_memory_region: ipu1-memory@9d000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9d000000 0x0 0x2000000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "vddshv8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		vin-supply = <&evm_5v0>;
-
-		gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x0
-			  3300000 0x1>;
-	};
-
-	evm_1v8_sw: fixedregulator-evm_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&lp8732_buck0_reg>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	poweroff: gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
-		input;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	lp8733: lp8733@60 {
-		compatible = "ti,lp8733";
-		reg = <0x60>;
-
-		buck0-in-supply =<&vsys_3v3>;
-		buck1-in-supply =<&vsys_3v3>;
-		ldo0-in-supply =<&evm_5v0>;
-		ldo1-in-supply =<&evm_5v0>;
-
-		lp8733_regulators: regulators {
-			lp8733_buck0_reg: buck0 {
-				/* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */
-				regulator-name = "lp8733-buck0";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			lp8733_buck1_reg: buck1 {
-				/* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */
-				regulator-name = "lp8733-buck1";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			lp8733_ldo0_reg: ldo0 {
-				/* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
-				regulator-name = "lp8733-ldo0";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			lp8733_ldo1_reg: ldo1 {
-				/* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
-				regulator-name = "lp8733-ldo1";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-
-	lp8732: lp8732@61 {
-		compatible = "ti,lp8732";
-		reg = <0x61>;
-
-		buck0-in-supply =<&vsys_3v3>;
-		buck1-in-supply =<&vsys_3v3>;
-		ldo0-in-supply =<&vsys_3v3>;
-		ldo1-in-supply =<&vsys_3v3>;
-
-		lp8732_regulators: regulators {
-			lp8732_buck0_reg: buck0 {
-				/* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */
-				regulator-name = "lp8732-buck0";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			lp8732_buck1_reg: buck1 {
-				/* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */
-				regulator-name = "lp8732-buck1";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			lp8732_ldo0_reg: ldo0 {
-				/* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
-				regulator-name = "lp8732-ldo0";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			lp8732_ldo1_reg: ldo1 {
-				/* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
-				regulator-name = "lp8732-ldo1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&pcf_lcd {
-	interrupt-parent = <&gpio7>;
-	interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&pcf_gpio_21 {
-	interrupt-parent = <&gpio7>;
-	interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&pcf_hdmi {
-	hdmi-i2c-disable-hog {
-		/*
-		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
-		 * With this PM_SEL(p3) should not matter
-		 */
-		gpio-hog;
-		gpios = <0 GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "pm_oe_n";
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
-	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
-	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
-	vqmmc-supply = <&vpo_sd_1v8_3v3>;
-};
-
-&mmc2 {
-	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
-	pinctrl-0 = <&mmc2_pins_default>;
-	pinctrl-1 = <&mmc2_pins_hs>;
-	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
-	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
-	vmmc-supply = <&evm_1v8_sw>;
-	vqmmc-supply = <&evm_1v8_sw>;
-};
-
-&mac_sw {
-	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
-		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
-		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
-	status = "okay";
-};
-
-&cpsw_port1 {
-	phy-handle = <&dp83867_0>;
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&dp83867_1>;
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-};
-
-&davinci_mdio_sw {
-	dp83867_0: ethernet-phy@2 {
-		reg = <2>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-impedance;
-		ti,dp83867-rxctrl-strap-quirk;
-	};
-
-	dp83867_1: ethernet-phy@3 {
-		reg = <3>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-impedance;
-		ti,dp83867-rxctrl-strap-quirk;
-	};
-};
-
-/* No Sata on this device */
-&sata_phy {
-	status = "disabled";
-};
-
-&sata {
-	status = "disabled";
-};
-
-/* No RTC on this device */
-&rtc {
-	status = "disabled";
-};
-
-&usb2_phy1 {
-	phy-supply = <&lp8733_ldo1_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&lp8733_ldo1_reg>;
-};
-
-&dss {
-	/* Supplied by VDA_1V8_PLL */
-	vdda_video-supply = <&lp8732_ldo0_reg>;
-};
-
-&hdmi {
-	/* Supplied by VDA_1V8_PHY */
-	vdda_video-supply = <&lp8732_ldo1_reg>;
-};
-
-&extcon_usb1 {
-	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
-};
-
-&extcon_usb2 {
-	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
-};
-
-&ipu2 {
-	status = "okay";
-	memory-region = <&ipu2_memory_region>;
-};
-
-&ipu1 {
-	status = "okay";
-	memory-region = <&ipu1_memory_region>;
-};
-
-&dsp1 {
-	status = "okay";
-	memory-region = <&dsp1_memory_region>;
-};
diff --git a/arch/arm/boot/dts/dra71x.dtsi b/arch/arm/boot/dts/dra71x.dtsi
deleted file mode 100644
index 9c270d8f75d5b..0000000000000
--- a/arch/arm/boot/dts/dra71x.dtsi
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "dra72-evm-common.dtsi"
-
-&rtctarget {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
deleted file mode 100644
index c79ba671ec2b9..0000000000000
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ /dev/null
@@ -1,593 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "dra72x.dtsi"
-#include "dra7-ipu-dsp-common.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/ti-dra7-atl.h>
-
-/ {
-	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
-
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	evm_12v0: fixedregulator-evm12v0 {
-		/* main supply */
-		compatible = "regulator-fixed";
-		regulator-name = "evm_12v0";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	evm_5v0: fixedregulator-evm5v0 {
-		/* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
-		/* Output 1 of LM5140QRWGTQ1 on dra71-evm */
-		compatible = "regulator-fixed";
-		regulator-name = "evm_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&evm_12v0>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	evm_3v6: fixedregulator-evm_3v6 {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_3v6";
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-		vin-supply = <&evm_5v0>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vsys_3v3: fixedregulator-vsys3v3 {
-		/* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
-		/* Output 2 of LM5140QRWGTQ1 on dra71-evm */
-		compatible = "regulator-fixed";
-		regulator-name = "vsys_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&evm_12v0>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	evm_3v3_sw: fixedregulator-evm_3v3 {
-		/* TPS22965DSG */
-		compatible = "regulator-fixed";
-		regulator-name = "evm_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vsys_3v3>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	aic_dvdd: fixedregulator-aic_dvdd {
-		/* TPS77018DBVT */
-		compatible = "regulator-fixed";
-		regulator-name = "aic_dvdd";
-		vin-supply = <&evm_3v3_sw>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	evm_3v3_sd: fixedregulator-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_3v3_sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&evm_3v3_sw>;
-		enable-active-high;
-		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	extcon_usb2: extcon_usb2 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder {
-		compatible = "ti,tpd12s015";
-
-		gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>,	/* P4, CT CP HPD */
-			<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>,	/* P5, LS OE */
-			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	sound0: sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "DRA7xx-EVM";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Line", "Line Out",
-			"Microphone", "Mic Jack",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT",
-			"Line Out",		"LLOUT",
-			"Line Out",		"RLOUT",
-			"MIC3L",		"Mic Jack",
-			"MIC3R",		"Mic Jack",
-			"Mic Jack",		"Mic Bias",
-			"LINE1L",               "Line In",
-			"LINE1R",               "Line In";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound0_master>;
-		simple-audio-card,frame-master = <&sound0_master>;
-		simple-audio-card,bitclock-inversion;
-
-		sound0_master: simple-audio-card,cpu {
-			sound-dai = <&mcasp3>;
-			system-clock-frequency = <5644800>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			clocks = <&atl_clkin2_ck>;
-		};
-	};
-
-	vmmcwl_fixed: fixedregulator-mmcwl {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcwl_fixed";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	clk_ov5640_fixed: clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-	};
-};
-
-&dra7_pmx_core {
-	dcan1_pins_default: dcan1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
-		>;
-	};
-
-	dcan1_pins_sleep: dcan1_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
-		>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	pcf_lcd: gpio@20 {
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	pcf_gpio_21: gpio@21 {
-		compatible = "nxp,pcf8575";
-		reg = <0x21>;
-		lines-initial-states = <0x1408>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	tlv320aic3106: tlv320aic3106@19 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x19>;
-		adc-settle-ms = <40>;
-		ai3x-micbias-vg = <1>;		/* 2.0V */
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&evm_3v3_sw>;
-		IOVDD-supply = <&evm_3v3_sw>;
-		DRVDD-supply = <&evm_3v3_sw>;
-		DVDD-supply = <&aic_dvdd>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	pcf_hdmi: pcf8575@26 {
-		compatible = "nxp,pcf8575";
-		reg = <0x26>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		/*
-		 * initial state is used here to keep the mdio interface
-		 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
-		 * VIN2_S0 driven high otherwise Ethernet stops working
-		 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
-		 */
-		lines-initial-states = <0x0f2b>;
-
-		hdmi-audio-hog {
-			/* vin6_sel_s0: high: VIN6, low: audio */
-			gpio-hog;
-			gpios = <1 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "vin6_sel_s0";
-		};
-	};
-
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-
-		clocks = <&clk_ov5640_fixed>;
-		clock-names = "xclk";
-
-		port {
-			csi2_cam0: endpoint {
-				remote-endpoint = <&csi2_phy0>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-
-};
-
-&uart1 {
-	status = "okay";
-	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x3e0>;
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	/*
-	 * For the existing IOdelay configuration via U-Boot we don't
-	 * support NAND on dra72-evm. Keep it disabled. Enabling it
-	 * requires a different configuration by U-Boot.
-	 */
-	status = "disabled";
-	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
-	nand@0,0 {
-		/* To use NAND, DIP switch SW5 must be set like so:
-		 * SW5.1 (NAND_SELn) = ON (LOW)
-		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
-		 */
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>;		/* device IO registers */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
-		ti,nand-xfer-type = "prefetch-dma";
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <80>;
-		gpmc,cs-wr-off-ns = <80>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <60>;
-		gpmc,adv-wr-off-ns = <60>;
-		gpmc,we-on-ns = <10>;
-		gpmc,we-off-ns = <50>;
-		gpmc,oe-on-ns = <4>;
-		gpmc,oe-off-ns = <40>;
-		gpmc,access-ns = <40>;
-		gpmc,wr-access-ns = <80>;
-		gpmc,rd-cycle-ns = <80>;
-		gpmc,wr-cycle-ns = <80>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x00020000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00020000 0x00020000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00040000 0x00020000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x00060000 0x00020000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x000c0000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x001c0000 0x00020000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x001e0000 0x00020000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00200000 0x00800000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x0f600000>;
-		};
-	};
-};
-
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&usb1 {
-	dr_mode = "otg";
-	extcon = <&extcon_usb1>;
-};
-
-&usb2 {
-	dr_mode = "host";
-	extcon = <&extcon_usb2>;
-};
-
-&mmc1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_default>;
-	vmmc-supply = <&evm_3v3_sd>;
-	bus-width = <4>;
-	/*
-	 * SDCD signal is not being used here - using the fact that GPIO mode
-	 * is a viable alternative
-	 */
-	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
-	max-frequency = <192000000>;
-};
-
-&mmc2 {
-	/* SW5-3 in ON position */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_default>;
-	bus-width = <8>;
-	non-removable;
-	max-frequency = <192000000>;
-};
-
-&mmc4 {
-	status = "okay";
-	vmmc-supply = <&evm_3v6>;
-	vqmmc-supply = <&vmmcwl_fixed>;
-	bus-width = <4>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	non-removable;
-	pinctrl-names = "default", "hs", "sdr12", "sdr25";
-	pinctrl-0 = <&mmc4_pins_default>;
-	pinctrl-1 = <&mmc4_pins_default>;
-	pinctrl-2 = <&mmc4_pins_default>;
-	pinctrl-3 = <&mmc4_pins_default>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wifi@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&dcan1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep", "active";
-	pinctrl-0 = <&dcan1_pins_sleep>;
-	pinctrl-1 = <&dcan1_pins_sleep>;
-	pinctrl-2 = <&dcan1_pins_default>;
-};
-
-&qspi {
-	status = "okay";
-
-	spi-max-frequency = <76800000>;
-	flash@0 {
-		compatible = "s25fl256s1";
-		spi-max-frequency = <76800000>;
-		reg = <0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first four physical blocks
-		 * for a valid file to boot and the flash here is
-		 * 64KiB block size.
-		 */
-		partition@0 {
-			label = "QSPI.SPL";
-			reg = <0x00000000 0x00010000>;
-		};
-		partition@1 {
-			label = "QSPI.SPL.backup1";
-			reg = <0x00010000 0x00010000>;
-		};
-		partition@2 {
-			label = "QSPI.SPL.backup2";
-			reg = <0x00020000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.SPL.backup3";
-			reg = <0x00030000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.u-boot";
-			reg = <0x00040000 0x00100000>;
-		};
-		partition@5 {
-			label = "QSPI.u-boot-spl-os";
-			reg = <0x00140000 0x00080000>;
-		};
-		partition@6 {
-			label = "QSPI.u-boot-env";
-			reg = <0x001c0000 0x00010000>;
-		};
-		partition@7 {
-			label = "QSPI.u-boot-env.backup1";
-			reg = <0x001d0000 0x0010000>;
-		};
-		partition@8 {
-			label = "QSPI.kernel";
-			reg = <0x001e0000 0x0800000>;
-		};
-		partition@9 {
-			label = "QSPI.file-system";
-			reg = <0x009e0000 0x01620000>;
-		};
-	};
-};
-
-&dss {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
-
-&atl {
-	assigned-clocks = <&abe_dpll_sys_clk_mux>,
-			  <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
-			  <&dpll_abe_ck>,
-			  <&dpll_abe_m2x2_ck>,
-			  <&atl_clkin2_ck>;
-	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
-	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
-
-	status = "okay";
-
-	atl2 {
-		bws = <DRA7_ATL_WS_MCASP2_FSX>;
-		aws = <DRA7_ATL_WS_MCASP3_FSX>;
-	};
-};
-
-&mcasp3 {
-	#sound-dai-cells = <0>;
-
-	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
-	assigned-clock-parents = <&atl_clkin2_ck>;
-
-	status = "okay";
-
-	op-mode = <0>;          /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializer */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		1 2 0 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&pcie1_rc {
-	status = "okay";
-};
-
-&csi2_0 {
-	csi2_phy0: endpoint {
-		remote-endpoint = <&csi2_cam0>;
-		clock-lanes = <0>;
-		data-lanes = <1 2>;
-	};
-};
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
deleted file mode 100644
index f242b937f88c8..0000000000000
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-#include "dra72-evm-common.dtsi"
-#include "dra72x-mmc-iodelay.dtsi"
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
-	model = "TI DRA722 Rev C EVM";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		ipu2_cma_pool: ipu2_cma@95800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x95800000 0x0 0x3800000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp1_cma_pool: dsp1_cma@99000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x99000000 0x0 0x4000000>;
-			reusable;
-			status = "okay";
-		};
-
-		ipu1_cma_pool: ipu1_cma@9d000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9d000000 0x0 0x2000000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	evm_1v8_sw: fixedregulator-evm_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&smps4_reg>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&i2c1 {
-	tps65917: tps65917@58 {
-		reg = <0x58>;
-
-		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
-	};
-};
-
-#include "dra72-evm-tps65917.dtsi"
-
-&ldo2_reg {
-	/* LDO2_OUT --> VDDA_1V8_PHY2 */
-	regulator-always-on;
-	regulator-boot-on;
-};
-
-&hdmi {
-	vdda-supply = <&ldo2_reg>;
-};
-
-&pcf_gpio_21 {
-	interrupt-parent = <&gpio3>;
-	interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&mac_sw {
-	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
-		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
-		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
-	status = "okay";
-};
-
-&cpsw_port1 {
-	phy-handle = <&dp83867_0>;
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&dp83867_1>;
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-};
-
-&davinci_mdio_sw {
-	dp83867_0: ethernet-phy@2 {
-		reg = <2>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-impedance;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-		ti,dp83867-rxctrl-strap-quirk;
-	};
-
-	dp83867_1: ethernet-phy@3 {
-		reg = <3>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-impedance;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-		ti,dp83867-rxctrl-strap-quirk;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
-	vqmmc-supply = <&ldo1_reg>;
-};
-
-&mmc2 {
-	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
-	pinctrl-0 = <&mmc2_pins_default>;
-	pinctrl-1 = <&mmc2_pins_hs>;
-	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
-	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
-	vmmc-supply = <&evm_1v8_sw>;
-};
-
-&ipu2 {
-	status = "okay";
-	memory-region = <&ipu2_cma_pool>;
-};
-
-&ipu1 {
-	status = "okay";
-	memory-region = <&ipu1_cma_pool>;
-};
-
-&dsp1 {
-	status = "okay";
-	memory-region = <&dsp1_cma_pool>;
-};
diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
deleted file mode 100644
index 7b433f5492391..0000000000000
--- a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * Integrated Power Management Chip
- * https://www.ti.com/lit/ds/symlink/tps65917-q1.pdf
- */
-
-&tps65917 {
-	compatible = "ti,tps65917";
-
-	interrupt-controller;
-	#interrupt-cells = <2>;
-
-	ti,system-power-controller;
-
-	tps65917_pmic {
-		compatible = "ti,tps65917-pmic";
-
-		smps1-in-supply = <&vsys_3v3>;
-		smps2-in-supply = <&vsys_3v3>;
-		smps3-in-supply = <&vsys_3v3>;
-		smps4-in-supply = <&vsys_3v3>;
-		smps5-in-supply = <&vsys_3v3>;
-		ldo1-in-supply = <&vsys_3v3>;
-		ldo2-in-supply = <&vsys_3v3>;
-		ldo3-in-supply = <&vsys_3v3>;
-		ldo4-in-supply = <&evm_5v0>;
-		ldo5-in-supply = <&vsys_3v3>;
-
-		tps65917_regulators: regulators {
-			smps1_reg: smps1 {
-				/* VDD_MPU */
-				regulator-name = "smps1";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			smps2_reg: smps2 {
-				/* VDD_CORE */
-				regulator-name = "smps2";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			smps3_reg: smps3 {
-				/* VDD_GPU IVA DSPEVE */
-				regulator-name = "smps3";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			smps4_reg: smps4 {
-				/* VDDS1V8 */
-				regulator-name = "smps4";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			smps5_reg: smps5 {
-				/* VDD_DDR */
-				regulator-name = "smps5";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo1_reg: ldo1 {
-				/* LDO1_OUT --> SDIO  */
-				regulator-name = "ldo1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-allow-bypass;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-name = "ldo2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-allow-bypass;
-			};
-
-			ldo3_reg: ldo3 {
-				/* VDDA_1V8_PHY */
-				regulator-name = "ldo3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo5_reg: ldo5 {
-				/* VDDA_1V8_PLL */
-				regulator-name = "ldo5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo4_reg: ldo4 {
-				/* VDDA_3V_USB: VDDA_USBHS33 */
-				regulator-name = "ldo4";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-			};
-		};
-	};
-
-	tps65917_power_button {
-		compatible = "ti,palmas-pwrbutton";
-		interrupt-parent = <&tps65917>;
-		interrupts = <1 IRQ_TYPE_NONE>;
-		wakeup-source;
-		ti,palmas-long-press-seconds = <6>;
-	};
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldo4_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldo4_reg>;
-};
-
-&dss {
-	vdda_video-supply = <&ldo5_reg>;
-};
-
-&mmc1 {
-	vqmmc-supply = <&ldo1_reg>;
-};
-
-&cpu0 {
-	vdd-supply = <&smps1_reg>;
-};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
deleted file mode 100644
index 5f62f92eb96c3..0000000000000
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
- */
-#include "dra72-evm-common.dtsi"
-#include "dra72x-mmc-iodelay.dtsi"
-/ {
-	model = "TI DRA722";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		ipu2_memory_region: ipu2-memory@95800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x95800000 0x0 0x3800000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp1_memory_region: dsp1-memory@99000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x99000000 0x0 0x4000000>;
-			reusable;
-			status = "okay";
-		};
-
-		ipu1_memory_region: ipu1-memory@9d000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9d000000 0x0 0x2000000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	evm_1v8_sw: fixedregulator-evm_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&smps4_reg>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&i2c1 {
-	tps65917: tps65917@58 {
-		reg = <0x58>;
-
-		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
-	};
-};
-
-#include "dra72-evm-tps65917.dtsi"
-
-&hdmi {
-	vdda-supply = <&ldo3_reg>;
-};
-
-&pcf_gpio_21 {
-	interrupt-parent = <&gpio6>;
-	interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&mac_sw {
-	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&cpsw_port1 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
-};
-
-&davinci_mdio_sw {
-	ethphy0: ethernet-phy@3 {
-		reg = <3>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50_rev10>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>;
-	vqmmc-supply = <&ldo1_reg>;
-};
-
-&mmc2 {
-	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
-	pinctrl-0 = <&mmc2_pins_default>;
-	pinctrl-1 = <&mmc2_pins_hs>;
-	pinctrl-2 = <&mmc2_pins_ddr_rev10>;
-	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>;
-	vmmc-supply = <&evm_1v8_sw>;
-};
-
-&ipu2 {
-	status = "okay";
-	memory-region = <&ipu2_memory_region>;
-};
-
-&ipu1 {
-	status = "okay";
-	memory-region = <&ipu1_memory_region>;
-};
-
-&dsp1 {
-	status = "okay";
-	memory-region = <&dsp1_memory_region>;
-};
diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
deleted file mode 100644
index 34eea3c048bdf..0000000000000
--- a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
+++ /dev/null
@@ -1,353 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs.
- *
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * Rules for modifying this file:
- * a) Update of this file should typically correspond to a datamanual revision.
- *    Datamanual revision that was used should be updated in comment below.
- *    If there is no update to datamanual, do not update the values. If you
- *    need to use values different from that recommended by the datamanual
- *    for your design, then you should consider adding values to the device-
- *    -tree file for your board directly.
- * b) We keep the mode names as close to the datamanual as possible. So
- *    if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
- *    we follow that in code too.
- * c) If the values change between multiple revisions of silicon, we add
- *    a revision tag to both the new and old entry. Use 'rev10' for PG 1.0,
- *    'rev20' for PG 2.0 and so on.
- * d) The node name and node label should be the exact same string. This is
- *    to curb naming creativity and achieve consistency.
- * e) If in future, DRA71x and DRA72x values differ, then add 'dra71_' and
- *    'dra72_' tag to entries. Both the new and old entries should gain a tag.
- *
- * Datamanual Revisions:
- *
- * AM571x Silicon Revision 2.0: SPRS957D, Revised January 2017
- * AM571x Silicon Revision 1.0: SPRS919M, Revised November 2017
- * DRA71x : SPRS960B, Revised February 2017
- */
-
-&dra7_pmx_core {
-	mmc1_pins_default: mmc1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_sdr12: mmc1_pins_sdr12 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_hs: mmc1_pins_hs {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_sdr25: mmc1_pins_sdr25 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_sdr50: mmc1_pins_sdr50 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_ddr50_rev10: mmc1_pins_ddr50_rev10 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
-			DRA7XX_CORE_IOPAD(0x375C, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
-		>;
-	};
-
-	mmc1_pins_ddr50_rev20: mmc1_pins_ddr50_rev20 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_sdr104: mmc1_pins_sdr104 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc2_pins_default: mmc2_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	mmc2_pins_hs: mmc2_pins_hs {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	mmc2_pins_ddr_rev10: mmc2_pins_ddr_rev10 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a22.mmc2_dat7 */
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs1.mmc2_cmd */
-		>;
-	};
-
-	mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	mmc2_pins_hs200: mmc2_pins_hs200 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	mmc4_pins_default: mmc4_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
-			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
-			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
-			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
-			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
-			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
-		>;
-	};
-};
-
-&dra7_iodelay_core {
-
-	/* Corresponds to MMC1_MANUAL1 in datamanual */
-	mmc1_iodelay_ddr50_conf: mmc1_iodelay_ddr50_conf {
-		pinctrl-pin-array = <
-			0x618 A_DELAY_PS(588) G_DELAY_PS(0)	/* CFG_MMC1_CLK_IN */
-			0x624 A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_CMD_IN */
-			0x630 A_DELAY_PS(1375) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_IN */
-			0x63C A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_IN */
-			0x648 A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_IN */
-			0x654 A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
-			0x620 A_DELAY_PS(1230) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
-			0x62C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
-			0x638 A_DELAY_PS(56) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
-			0x644 A_DELAY_PS(76) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
-			0x650 A_DELAY_PS(91) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
-			0x65C A_DELAY_PS(99) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
-			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
-			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
-			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
-			0x64C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
-			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
-		>;
-	};
-
-	/* Corresponds to MMC1_MANUAL2 in datamanual */
-	mmc1_iodelay_sdr104_rev10_conf: mmc1_iodelay_sdr104_rev10_conf {
-		pinctrl-pin-array = <
-			0x620 A_DELAY_PS(560) G_DELAY_PS(365)	/* CFG_MMC1_CLK_OUT */
-			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
-			0x638 A_DELAY_PS(29) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
-			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
-			0x650 A_DELAY_PS(47) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
-			0x65c A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
-			0x628 A_DELAY_PS(125) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
-			0x634 A_DELAY_PS(43) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
-			0x640 A_DELAY_PS(433) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
-			0x64c A_DELAY_PS(287) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
-			0x658 A_DELAY_PS(351) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
-		>;
-	};
-
-	/* Corresponds to MMC1_MANUAL2 in datamanual */
-	mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
-		pinctrl-pin-array = <
-			0x620 A_DELAY_PS(520) G_DELAY_PS(320)	/* CFG_MMC1_CLK_OUT */
-			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
-			0x638 A_DELAY_PS(40) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
-			0x644 A_DELAY_PS(83) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
-			0x650 A_DELAY_PS(98) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
-			0x65c A_DELAY_PS(106) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
-			0x628 A_DELAY_PS(51) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
-			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
-			0x640 A_DELAY_PS(363) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
-			0x64c A_DELAY_PS(199) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
-			0x658 A_DELAY_PS(273) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
-		>;
-	};
-
-	/* Corresponds to MMC2_MANUAL1 in datamanual */
-	mmc2_iodelay_ddr_conf: mmc2_iodelay_ddr_conf {
-		pinctrl-pin-array = <
-			0x18c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_IN */
-			0x1a4 A_DELAY_PS(119) G_DELAY_PS(0)	/* CFG_GPMC_A20_IN */
-			0x1b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_IN */
-			0x1bc A_DELAY_PS(18) G_DELAY_PS(0)	/* CFG_GPMC_A22_IN */
-			0x1c8 A_DELAY_PS(894) G_DELAY_PS(0)	/* CFG_GPMC_A23_IN */
-			0x1d4 A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_GPMC_A24_IN */
-			0x1e0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_IN */
-			0x1ec A_DELAY_PS(23) G_DELAY_PS(0)	/* CFG_GPMC_A26_IN */
-			0x1f8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_IN */
-			0x360 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_IN */
-			0x194 A_DELAY_PS(152) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
-			0x1ac A_DELAY_PS(206) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
-			0x1b8 A_DELAY_PS(78) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
-			0x1c4 A_DELAY_PS(2) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
-			0x1d0 A_DELAY_PS(266) G_DELAY_PS(0)	/* CFG_GPMC_A23_OUT */
-			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
-			0x1e8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
-			0x1f4 A_DELAY_PS(43) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
-			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
-			0x368 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
-			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
-			0x1a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
-			0x1b4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
-			0x1c0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
-			0x1d8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
-			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
-			0x1f0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
-			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
-			0x364 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
-		>;
-	};
-
-	/* Corresponds to MMC2_MANUAL3 in datamanual */
-	mmc2_iodelay_hs200_rev10_conf: mmc2_iodelay_hs200_rev10_conf {
-		pinctrl-pin-array = <
-			0x194 A_DELAY_PS(150) G_DELAY_PS(95)	/* CFG_GPMC_A19_OUT */
-			0x1ac A_DELAY_PS(250) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
-			0x1b8 A_DELAY_PS(125) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
-			0x1c4 A_DELAY_PS(100) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
-			0x1d0 A_DELAY_PS(870) G_DELAY_PS(415)	/* CFG_GPMC_A23_OUT */
-			0x1dc A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
-			0x1e8 A_DELAY_PS(200) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
-			0x1f4 A_DELAY_PS(200) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
-			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
-			0x368 A_DELAY_PS(240) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
-			0x190 A_DELAY_PS(695) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
-			0x1a8 A_DELAY_PS(924) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
-			0x1b4 A_DELAY_PS(719) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
-			0x1c0 A_DELAY_PS(824) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
-			0x1d8 A_DELAY_PS(877) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
-			0x1e4 A_DELAY_PS(446) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
-			0x1f0 A_DELAY_PS(847) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
-			0x1fc A_DELAY_PS(586) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
-			0x364 A_DELAY_PS(1039) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
-		>;
-	};
-
-	/* Corresponds to MMC2_MANUAL3 in datamanual */
-	mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
-		pinctrl-pin-array = <
-			0x194 A_DELAY_PS(285) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
-			0x1ac A_DELAY_PS(189) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
-			0x1b8 A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A21_OUT */
-			0x1c4 A_DELAY_PS(0) G_DELAY_PS(70)	/* CFG_GPMC_A22_OUT */
-			0x1d0 A_DELAY_PS(730) G_DELAY_PS(360)	/* CFG_GPMC_A23_OUT */
-			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
-			0x1e8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
-			0x1f4 A_DELAY_PS(70) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
-			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
-			0x368 A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_CS1_OUT */
-			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
-			0x1a8 A_DELAY_PS(231) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
-			0x1b4 A_DELAY_PS(39) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
-			0x1c0 A_DELAY_PS(91) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
-			0x1d8 A_DELAY_PS(176) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
-			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
-			0x1f0 A_DELAY_PS(101) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
-			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
-			0x364 A_DELAY_PS(360) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
deleted file mode 100644
index 90617261373cf..0000000000000
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Based on "omap4.dtsi"
- */
-
-#include "dra7.dtsi"
-
-/ {
-	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
-
-	aliases {
-		rproc0 = &ipu1;
-		rproc1 = &ipu2;
-		rproc2 = &dsp1;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&wakeupgen>;
-		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&l4_per2 {
-	target-module@5b000 {			/* 0x4845b000, ap 59 46.0 */
-		compatible = "ti,sysc-omap4", "ti,sysc";
-		reg = <0x5b000 0x4>,
-		      <0x5b010 0x4>;
-		reg-names = "rev", "sysc";
-		ti,sysc-midle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>;
-		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>;
-		clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
-		clock-names = "fck";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x5b000 0x1000>;
-
-		cal: cal@0 {
-			compatible = "ti,dra72-cal";
-			reg = <0x0000 0x400>,
-			      <0x0800 0x40>,
-			      <0x0900 0x40>;
-			reg-names = "cal_top",
-				    "cal_rx_core0",
-				    "cal_rx_core1";
-			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-			ti,camerrx-control = <&scm_conf 0xE94>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				csi2_0: port@0 {
-					reg = <0>;
-				};
-				csi2_1: port@1 {
-					reg = <1>;
-				};
-			};
-		};
-	};
-};
-
-&dss {
-	reg = <0 0x80>,
-	      <0x4054 0x4>,
-	      <0x4300 0x20>;
-	reg-names = "dss", "pll1_clkctrl", "pll1";
-
-	clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
-		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>;
-	clock-names = "fck", "video1_clk";
-};
-
-&mailbox5 {
-	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
-		ti,mbox-tx = <6 2 2>;
-		ti,mbox-rx = <4 2 2>;
-		status = "disabled";
-	};
-	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
-		ti,mbox-tx = <5 2 2>;
-		ti,mbox-rx = <1 2 2>;
-		status = "disabled";
-	};
-};
-
-&mailbox6 {
-	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
-		ti,mbox-tx = <6 2 2>;
-		ti,mbox-rx = <4 2 2>;
-		status = "disabled";
-	};
-};
-
-&pcie1_rc {
-	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
-};
-
-&pcie1_ep {
-	compatible = "ti,dra726-pcie-ep", "ti,dra7-pcie-ep";
-};
-
-&pcie2_rc {
-	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
-};
diff --git a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
deleted file mode 100644
index 3256631510c56..0000000000000
--- a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common IPU and DSP data for TI DRA74x/DRA76x/AM572x/AM574x platforms
- */
-
-#include "dra7-ipu-dsp-common.dtsi"
-
-&mailbox6 {
-	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
-		status = "okay";
-	};
-};
-
-&dsp2 {
-	mboxes = <&mailbox6 &mbox_dsp2_ipc3x>;
-	ti,timers = <&timer6>;
-	ti,watchdog-timers = <&timer13>;
-};
diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
deleted file mode 100644
index b9d040135c5fa..0000000000000
--- a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
+++ /dev/null
@@ -1,639 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs.
- *
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * Rules for modifying this file:
- * a) Update of this file should typically correspond to a datamanual revision.
- *    Datamanual revision that was used should be updated in comment below.
- *    If there is no update to datamanual, do not update the values. If you
- *    need to use values different from that recommended by the datamanual
- *    for your design, then you should consider adding values to the device-
- *    -tree file for your board directly.
- * b) We keep the mode names as close to the datamanual as possible. So
- *    if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
- *    we follow that in code too.
- * c) If the values change between multiple revisions of silicon, we add
- *    a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
- *    'rev20' for PG 2.0 and so on.
- * d) The node name and node label should be the exact same string. This is
- *    to curb naming creativity and achieve consistency.
- *
- * Datamanual Revisions:
- *
- * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019
- * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
- *
- */
-
-&dra7_pmx_core {
-	mmc1_pins_default: mmc1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_sdr12: mmc1_pins_sdr12 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_hs: mmc1_pins_hs {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_sdr25: mmc1_pins_sdr25 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_sdr50: mmc1_pins_sdr50 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_ddr50: mmc1_pins_ddr50 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_sdr104: mmc1_pins_sdr104 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc2_pins_default: mmc2_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	mmc2_pins_hs: mmc2_pins_hs {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	mmc2_pins_ddr_3_3v_rev11: mmc2_pins_ddr_3_3v_rev11 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	mmc2_pins_ddr_1_8v_rev11: mmc2_pins_ddr_1_8v_rev11 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	mmc2_pins_hs200: mmc2_pins_hs200 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	mmc4_pins_default: mmc4_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
-			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
-			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
-			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
-			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
-			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
-		>;
-	};
-
-	mmc4_pins_hs: mmc4_pins_hs {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
-			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
-			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
-			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
-			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
-			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
-		>;
-	};
-
-	mmc3_pins_default: mmc3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
-		>;
-	};
-
-	mmc3_pins_hs: mmc3_pins_hs {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
-		>;
-	};
-
-	mmc3_pins_sdr12: mmc3_pins_sdr12 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
-		>;
-	};
-
-	mmc3_pins_sdr25: mmc3_pins_sdr25 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
-		>;
-	};
-
-	mmc3_pins_sdr50: mmc3_pins_sdr50 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
-		>;
-	};
-
-	mmc4_pins_sdr12: mmc4_pins_sdr12 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
-			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
-			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
-			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
-			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
-			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
-		>;
-	};
-
-	mmc4_pins_sdr25: mmc4_pins_sdr25 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
-			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
-			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
-			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
-			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
-			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
-		>;
-	};
-};
-
-&dra7_iodelay_core {
-
-	/* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
-	mmc1_iodelay_ddr_rev11_conf: mmc1_iodelay_ddr_rev11_conf {
-		pinctrl-pin-array = <
-			0x618 A_DELAY_PS(572) G_DELAY_PS(540)	/* CFG_MMC1_CLK_IN */
-			0x620 A_DELAY_PS(1525) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
-			0x624 A_DELAY_PS(0) G_DELAY_PS(600)	/* CFG_MMC1_CMD_IN */
-			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
-			0x62c A_DELAY_PS(55) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
-			0x630 A_DELAY_PS(403) G_DELAY_PS(120)	/* CFG_MMC1_DAT0_IN */
-			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
-			0x638 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
-			0x63c A_DELAY_PS(23) G_DELAY_PS(60)	/* CFG_MMC1_DAT1_IN */
-			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
-			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
-			0x648 A_DELAY_PS(25) G_DELAY_PS(60)	/* CFG_MMC1_DAT2_IN */
-			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
-			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
-			0x654 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
-			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
-			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
-	mmc1_iodelay_ddr_rev20_conf: mmc1_iodelay_ddr50_rev20_conf {
-		pinctrl-pin-array = <
-			0x618 A_DELAY_PS(1076) G_DELAY_PS(330)	/* CFG_MMC1_CLK_IN */
-			0x620 A_DELAY_PS(1271) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
-			0x624 A_DELAY_PS(722) G_DELAY_PS(0)	/* CFG_MMC1_CMD_IN */
-			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
-			0x62C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
-			0x630 A_DELAY_PS(751) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_IN */
-			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
-			0x638 A_DELAY_PS(20) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
-			0x63C A_DELAY_PS(256) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_IN */
-			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
-			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
-			0x648 A_DELAY_PS(263) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_IN */
-			0x64C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
-			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
-			0x654 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
-			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
-			0x65C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
-	mmc1_iodelay_sdr104_rev11_conf: mmc1_iodelay_sdr104_rev11_conf {
-		pinctrl-pin-array = <
-			0x620 A_DELAY_PS(1063) G_DELAY_PS(17)	/* CFG_MMC1_CLK_OUT */
-			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
-			0x62c A_DELAY_PS(23) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
-			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
-			0x638 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
-			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
-			0x644 A_DELAY_PS(2) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
-			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
-			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
-			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
-			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
-	mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
-		pinctrl-pin-array = <
-			0x620 A_DELAY_PS(600) G_DELAY_PS(400)	/* CFG_MMC1_CLK_OUT */
-			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
-			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
-			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
-			0x638 A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
-			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
-			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
-			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
-			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
-			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
-			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
-	mmc2_iodelay_hs200_rev11_conf: mmc2_iodelay_hs200_rev11_conf {
-		pinctrl-pin-array = <
-			0x190 A_DELAY_PS(621) G_DELAY_PS(600)	/* CFG_GPMC_A19_OEN */
-			0x194 A_DELAY_PS(300) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
-			0x1a8 A_DELAY_PS(739) G_DELAY_PS(600)	/* CFG_GPMC_A20_OEN */
-			0x1ac A_DELAY_PS(240) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
-			0x1b4 A_DELAY_PS(812) G_DELAY_PS(600)	/* CFG_GPMC_A21_OEN */
-			0x1b8 A_DELAY_PS(240) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
-			0x1c0 A_DELAY_PS(954) G_DELAY_PS(600)	/* CFG_GPMC_A22_OEN */
-			0x1c4 A_DELAY_PS(60)  G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
-			0x1d0 A_DELAY_PS(1340) G_DELAY_PS(420)	/* CFG_GPMC_A23_OUT */
-			0x1d8 A_DELAY_PS(935) G_DELAY_PS(600)	/* CFG_GPMC_A24_OEN */
-			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
-			0x1e4 A_DELAY_PS(525) G_DELAY_PS(600)	/* CFG_GPMC_A25_OEN */
-			0x1e8 A_DELAY_PS(120) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
-			0x1f0 A_DELAY_PS(767) G_DELAY_PS(600)	/* CFG_GPMC_A26_OEN */
-			0x1f4 A_DELAY_PS(225) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
-			0x1fc A_DELAY_PS(565) G_DELAY_PS(600)	/* CFG_GPMC_A27_OEN */
-			0x200 A_DELAY_PS(60) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
-			0x364 A_DELAY_PS(969) G_DELAY_PS(600)	/* CFG_GPMC_CS1_OEN */
-			0x368 A_DELAY_PS(180) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
-	      >;
-	};
-
-	/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
-	mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
-		pinctrl-pin-array = <
-			0x190 A_DELAY_PS(274) G_DELAY_PS(0)       /* CFG_GPMC_A19_OEN */
-			0x194 A_DELAY_PS(162) G_DELAY_PS(0)       /* CFG_GPMC_A19_OUT */
-			0x1a8 A_DELAY_PS(401) G_DELAY_PS(0)       /* CFG_GPMC_A20_OEN */
-			0x1ac A_DELAY_PS(73) G_DELAY_PS(0)        /* CFG_GPMC_A20_OUT */
-			0x1b4 A_DELAY_PS(465) G_DELAY_PS(0)       /* CFG_GPMC_A21_OEN */
-			0x1b8 A_DELAY_PS(115) G_DELAY_PS(0)       /* CFG_GPMC_A21_OUT */
-			0x1c0 A_DELAY_PS(633) G_DELAY_PS(0)       /* CFG_GPMC_A22_OEN */
-			0x1c4 A_DELAY_PS(47) G_DELAY_PS(0)        /* CFG_GPMC_A22_OUT */
-			0x1d0 A_DELAY_PS(935) G_DELAY_PS(280)     /* CFG_GPMC_A23_OUT */
-			0x1d8 A_DELAY_PS(621) G_DELAY_PS(0)       /* CFG_GPMC_A24_OEN */
-			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A24_OUT */
-			0x1e4 A_DELAY_PS(183) G_DELAY_PS(0)       /* CFG_GPMC_A25_OEN */
-			0x1e8 A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A25_OUT */
-			0x1f0 A_DELAY_PS(467) G_DELAY_PS(0)       /* CFG_GPMC_A26_OEN */
-			0x1f4 A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A26_OUT */
-			0x1fc A_DELAY_PS(262) G_DELAY_PS(0)       /* CFG_GPMC_A27_OEN */
-			0x200 A_DELAY_PS(46) G_DELAY_PS(0)        /* CFG_GPMC_A27_OUT */
-			0x364 A_DELAY_PS(684) G_DELAY_PS(0)       /* CFG_GPMC_CS1_OEN */
-			0x368 A_DELAY_PS(76) G_DELAY_PS(0)        /* CFG_GPMC_CS1_OUT */
-	      >;
-	};
-
-	/* Correspnds to MMC2_DDR_3V3_MANUAL1 in datamanual */
-	mmc2_iodelay_ddr_3_3v_rev11_conf: mmc2_iodelay_ddr_3_3v_rev11_conf {
-		pinctrl-pin-array = <
-			0x18c A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A19_IN */
-			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
-			0x194 A_DELAY_PS(174) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
-			0x1a4 A_DELAY_PS(265) G_DELAY_PS(360)	/* CFG_GPMC_A20_IN */
-			0x1a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
-			0x1ac A_DELAY_PS(168) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
-			0x1b0 A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A21_IN */
-			0x1b4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
-			0x1b8 A_DELAY_PS(136) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
-			0x1bc A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A22_IN */
-			0x1c0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
-			0x1c4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
-			0x1c8 A_DELAY_PS(287) G_DELAY_PS(420)	/* CFG_GPMC_A23_IN */
-			0x1d0 A_DELAY_PS(879) G_DELAY_PS(0)	/* CFG_GPMC_A23_OUT */
-			0x1d4 A_DELAY_PS(144) G_DELAY_PS(240)	/* CFG_GPMC_A24_IN */
-			0x1d8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
-			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
-			0x1e0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_IN */
-			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
-			0x1e8 A_DELAY_PS(34) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
-			0x1ec A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A26_IN */
-			0x1f0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
-			0x1f4 A_DELAY_PS(120) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
-			0x1f8 A_DELAY_PS(120) G_DELAY_PS(180)	/* CFG_GPMC_A27_IN */
-			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
-			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
-			0x360 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_IN */
-			0x364 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
-			0x368 A_DELAY_PS(11) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC2_DDR_1V8_MANUAL1 in datamanual */
-	mmc2_iodelay_ddr_1_8v_rev11_conf: mmc2_iodelay_ddr_1_8v_rev11_conf {
-		pinctrl-pin-array = <
-			0x18c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_IN */
-			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
-			0x194 A_DELAY_PS(174) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
-			0x1a4 A_DELAY_PS(274) G_DELAY_PS(240)	/* CFG_GPMC_A20_IN */
-			0x1a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
-			0x1ac A_DELAY_PS(168) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
-			0x1b0 A_DELAY_PS(0) G_DELAY_PS(60)	/* CFG_GPMC_A21_IN */
-			0x1b4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
-			0x1b8 A_DELAY_PS(136) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
-			0x1bc A_DELAY_PS(0) G_DELAY_PS(60)	/* CFG_GPMC_A22_IN */
-			0x1c0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
-			0x1c4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
-			0x1c8 A_DELAY_PS(514) G_DELAY_PS(360)	/* CFG_GPMC_A23_IN */
-			0x1d0 A_DELAY_PS(879) G_DELAY_PS(0)	/* CFG_GPMC_A23_OUT */
-			0x1d4 A_DELAY_PS(187) G_DELAY_PS(120)	/* CFG_GPMC_A24_IN */
-			0x1d8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
-			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
-			0x1e0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_IN */
-			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
-			0x1e8 A_DELAY_PS(34) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
-			0x1ec A_DELAY_PS(0) G_DELAY_PS(60)	/* CFG_GPMC_A26_IN */
-			0x1f0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
-			0x1f4 A_DELAY_PS(120) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
-			0x1f8 A_DELAY_PS(121) G_DELAY_PS(60)	/* CFG_GPMC_A27_IN */
-			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
-			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
-			0x360 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_IN */
-			0x364 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
-			0x368 A_DELAY_PS(11) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC3_MANUAL1 in datamanual */
-	mmc3_iodelay_manual1_rev20_conf: mmc3_iodelay_manual1_conf {
-		pinctrl-pin-array = <
-			0x678 A_DELAY_PS(0) G_DELAY_PS(386)	/* CFG_MMC3_CLK_IN */
-			0x680 A_DELAY_PS(605) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
-			0x684 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
-			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
-			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
-			0x690 A_DELAY_PS(171) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
-			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
-			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
-			0x69c A_DELAY_PS(221) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
-			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
-			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
-			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
-			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
-			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
-			0x6b4 A_DELAY_PS(474) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
-			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
-			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC3_MANUAL1 in datamanual */
-	mmc3_iodelay_manual1_rev11_conf: mmc3_iodelay_manual1_conf {
-		pinctrl-pin-array = <
-			0x678 A_DELAY_PS(406) G_DELAY_PS(0)	/* CFG_MMC3_CLK_IN */
-			0x680 A_DELAY_PS(659) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
-			0x684 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
-			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
-			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
-			0x690 A_DELAY_PS(130) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
-			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
-			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
-			0x69c A_DELAY_PS(169) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
-			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
-			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
-			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
-			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
-			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
-			0x6b4 A_DELAY_PS(457) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
-			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
-			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC4_DS_MANUAL1 in datamanual */
-	mmc4_iodelay_ds_rev11_conf: mmc4_iodelay_ds_rev11_conf {
-		pinctrl-pin-array = <
-			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
-			0x848 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
-			0x84c A_DELAY_PS(96) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
-			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
-			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
-			0x870 A_DELAY_PS(582) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
-			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
-			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
-			0x87c A_DELAY_PS(391) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
-			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
-			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
-			0x888 A_DELAY_PS(561) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
-			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
-			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
-			0x894 A_DELAY_PS(588) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
-			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
-			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC4_DS_MANUAL1 in datamanual */
-	mmc4_iodelay_ds_rev20_conf: mmc4_iodelay_ds_rev20_conf {
-		pinctrl-pin-array = <
-			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
-			0x848 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
-			0x84c A_DELAY_PS(307) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
-			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
-			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
-			0x870 A_DELAY_PS(785) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
-			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
-			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
-			0x87c A_DELAY_PS(613) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
-			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
-			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
-			0x888 A_DELAY_PS(683) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
-			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
-			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
-			0x894 A_DELAY_PS(835) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
-			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
-			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC4_MANUAL1 in datamanual */
-	mmc4_iodelay_sdr12_hs_sdr25_rev11_conf: mmc4_iodelay_sdr12_hs_sdr25_rev11_conf {
-		pinctrl-pin-array = <
-			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
-			0x848 A_DELAY_PS(2651) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
-			0x84c A_DELAY_PS(1572) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
-			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
-			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
-			0x870 A_DELAY_PS(1913) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
-			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
-			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
-			0x87c A_DELAY_PS(1721) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
-			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
-			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
-			0x888 A_DELAY_PS(1891) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
-			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
-			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
-			0x894 A_DELAY_PS(1919) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
-			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
-			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC4_MANUAL1 in datamanual */
-	mmc4_iodelay_sdr12_hs_sdr25_rev20_conf: mmc4_iodelay_sdr12_hs_sdr25_rev20_conf {
-		pinctrl-pin-array = <
-			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
-			0x848 A_DELAY_PS(1147) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
-			0x84c A_DELAY_PS(1834) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
-			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
-			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
-			0x870 A_DELAY_PS(2165) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
-			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
-			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
-			0x87c A_DELAY_PS(1929) G_DELAY_PS(64)	/* CFG_UART2_RTSN_IN */
-			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
-			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
-			0x888 A_DELAY_PS(1935) G_DELAY_PS(128)	/* CFG_UART2_RXD_IN */
-			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
-			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
-			0x894 A_DELAY_PS(2172) G_DELAY_PS(44)	/* CFG_UART2_TXD_IN */
-			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
-			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/dra74x-p.dtsi b/arch/arm/boot/dts/dra74x-p.dtsi
deleted file mode 100644
index 006189dad7a7b..0000000000000
--- a/arch/arm/boot/dts/dra74x-p.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "dra74x.dtsi"
-
-/ {
-	compatible = "ti,dra762", "ti,dra7";
-
-	ocp {
-		emif1: emif@4c000000 {
-			compatible = "ti,emif-dra7xx";
-			reg = <0x4c000000 0x200>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-	};
-};
-
-/* MCAN interrupts are hard-wired to irqs 67, 68 */
-&crossbar_mpu {
-	ti,irqs-skip = <10 67 68 133 139 140>;
-};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
deleted file mode 100644
index cfb39dde49300..0000000000000
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Based on "omap4.dtsi"
- */
-
-#include "dra7.dtsi"
-
-/ {
-	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
-
-	cpus {
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-
-			/* cooling options */
-			#cooling-cells = <2>; /* min followed by max */
-
-			vbb-supply = <&abb_mpu>;
-		};
-	};
-
-	aliases {
-		rproc0 = &ipu1;
-		rproc1 = &ipu2;
-		rproc2 = &dsp1;
-		rproc3 = &dsp2;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&wakeupgen>;
-		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	ocp {
-		dsp2_system: dsp_system@41500000 {
-			compatible = "syscon";
-			reg = <0x41500000 0x100>;
-		};
-
-
-		target-module@41501000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x41501000 0x4>,
-			      <0x41501010 0x4>,
-			      <0x41501014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
-			clock-names = "fck";
-			resets = <&prm_dsp2 1>;
-			reset-names = "rstctrl";
-			ranges = <0x0 0x41501000 0x1000>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			mmu0_dsp2: mmu@0 {
-				compatible = "ti,dra7-dsp-iommu";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-				#iommu-cells = <0>;
-				ti,syscon-mmuconfig = <&dsp2_system 0x0>;
-			};
-		};
-
-		target-module@41502000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x41502000 0x4>,
-			      <0x41502010 0x4>,
-			      <0x41502014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-
-			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
-			clock-names = "fck";
-			resets = <&prm_dsp2 1>;
-			reset-names = "rstctrl";
-			ranges = <0x0 0x41502000 0x1000>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			mmu1_dsp2: mmu@0 {
-				compatible = "ti,dra7-dsp-iommu";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-				#iommu-cells = <0>;
-				ti,syscon-mmuconfig = <&dsp2_system 0x1>;
-			};
-		};
-
-		dsp2: dsp@41000000 {
-			compatible = "ti,dra7-dsp";
-			reg = <0x41000000 0x48000>,
-			      <0x41600000 0x8000>,
-			      <0x41700000 0x8000>;
-			reg-names = "l2ram", "l1pram", "l1dram";
-			ti,bootreg = <&scm_conf 0x560 10>;
-			iommus = <&mmu0_dsp2>, <&mmu1_dsp2>;
-			status = "disabled";
-			resets = <&prm_dsp2 0>;
-			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
-			firmware-name = "dra7-dsp2-fw.xe66";
-		};
-	};
-};
-
-&cpu0_opp_table {
-	opp-shared;
-};
-
-&dss {
-	reg = <0 0x80>,
-	      <0x4054 0x4>,
-	      <0x4300 0x20>,
-	      <0x9054 0x4>,
-	      <0x9300 0x20>;
-	reg-names = "dss", "pll1_clkctrl", "pll1",
-		    "pll2_clkctrl", "pll2";
-
-	clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
-		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>,
-		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 13>;
-	clock-names = "fck", "video1_clk", "video2_clk";
-};
-
-&mailbox5 {
-	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
-		ti,mbox-tx = <6 2 2>;
-		ti,mbox-rx = <4 2 2>;
-		status = "disabled";
-	};
-	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
-		ti,mbox-tx = <5 2 2>;
-		ti,mbox-rx = <1 2 2>;
-		status = "disabled";
-	};
-};
-
-&mailbox6 {
-	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
-		ti,mbox-tx = <6 2 2>;
-		ti,mbox-rx = <4 2 2>;
-		status = "disabled";
-	};
-	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
-		ti,mbox-tx = <5 2 2>;
-		ti,mbox-rx = <1 2 2>;
-		status = "disabled";
-	};
-};
-
-&pcie1_rc {
-	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
-};
-
-&pcie1_ep {
-	compatible = "ti,dra746-pcie-ep", "ti,dra7-pcie-ep";
-};
-
-&pcie2_rc {
-	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
-};
-
-&l4_per3 {
-	segment@0 {
-		usb4_tm: target-module@140000 {         /* 0x48940000, ap 75 3c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x140000 0x4>,
-			      <0x140010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x140000 0x20000>;
-
-			omap_dwc3_4: omap_dwc3_4@0 {
-				compatible = "ti,dwc3";
-				reg = <0 0x10000>;
-				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				utmi-mode = <2>;
-				ranges;
-				status = "disabled";
-				usb4: usb@10000 {
-					compatible = "snps,dwc3";
-					reg = <0x10000 0x17000>;
-					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "peripheral",
-							  "host",
-							  "otg";
-					maximum-speed = "high-speed";
-					dr_mode = "otg";
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
deleted file mode 100644
index 57868ac60d298..0000000000000
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ /dev/null
@@ -1,567 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "dra76x.dtsi"
-#include "dra7-evm-common.dtsi"
-#include "dra76x-mmc-iodelay.dtsi"
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
-	model = "TI DRA762 EVM";
-	compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
-
-	aliases {
-		display0 = &hdmi0;
-
-		sound0 = &sound0;
-		sound1 = &hdmi;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		ipu2_cma_pool: ipu2_cma@95800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x95800000 0x0 0x3800000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp1_cma_pool: dsp1_cma@99000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x99000000 0x0 0x4000000>;
-			reusable;
-			status = "okay";
-		};
-
-		ipu1_cma_pool: ipu1_cma@9d000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9d000000 0x0 0x2000000>;
-			reusable;
-			status = "okay";
-		};
-
-		dsp2_cma_pool: dsp2_cma@9f000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x9f000000 0x0 0x800000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	vsys_12v0: fixedregulator-vsys12v0 {
-		/* main supply */
-		compatible = "regulator-fixed";
-		regulator-name = "vsys_12v0";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vsys_5v0: fixedregulator-vsys5v0 {
-		/* Output of Cntlr B of TPS43351-Q1 on dra76-evm */
-		compatible = "regulator-fixed";
-		regulator-name = "vsys_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vsys_12v0>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vio_3v6: fixedregulator-vio_3v6 {
-		compatible = "regulator-fixed";
-		regulator-name = "vio_3v6";
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-		vin-supply = <&vsys_5v0>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vsys_3v3: fixedregulator-vsys3v3 {
-		/* Output of Cntlr A of TPS43351-Q1 on dra76-evm */
-		compatible = "regulator-fixed";
-		regulator-name = "vsys_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vsys_12v0>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vio_3v3: fixedregulator-vio_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vio_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vsys_3v3>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vio_3v3_sd: fixedregulator-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "vio_3v3_sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vio_3v3>;
-		enable-active-high;
-		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-	};
-
-	vio_1v8: fixedregulator-vio_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vio_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&smps5_reg>;
-	};
-
-	vmmcwl_fixed: fixedregulator-mmcwl {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcwl_fixed";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio5 8 0>;	/* gpio5_8 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		regulator-min-microvolt = <1350000>;
-		regulator-max-microvolt = <1350000>;
-		vin-supply = <&vsys_3v3>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	aic_dvdd: fixedregulator-aic_dvdd {
-		/* TPS77018DBVT */
-		compatible = "regulator-fixed";
-		regulator-name = "aic_dvdd";
-		vin-supply = <&vio_3v3>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder {
-		compatible = "ti,tpd12s015";
-
-		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>,   /* gpio7_30, CT CP HPD */
-			<&gpio7 31 GPIO_ACTIVE_HIGH>,   /* gpio7_31, LS OE */
-			<&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps65917: tps65917@58 {
-		compatible = "ti,tps65917";
-		reg = <0x58>;
-		ti,system-power-controller;
-		ti,palmas-override-powerhold;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		tps65917_pmic {
-			compatible = "ti,tps65917-pmic";
-
-			smps12-in-supply = <&vsys_3v3>;
-			smps3-in-supply = <&vsys_3v3>;
-			smps4-in-supply = <&vsys_3v3>;
-			smps5-in-supply = <&vsys_3v3>;
-			ldo1-in-supply = <&vsys_3v3>;
-			ldo2-in-supply = <&vsys_3v3>;
-			ldo3-in-supply = <&vsys_5v0>;
-			ldo4-in-supply = <&vsys_5v0>;
-			ldo5-in-supply = <&vsys_3v3>;
-
-			tps65917_regulators: regulators {
-				smps12_reg: smps12 {
-					/* VDD_DSPEVE */
-					regulator-name = "smps12";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps3_reg: smps3 {
-					/* VDD_CORE */
-					regulator-name = "smps3";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				smps4_reg: smps4 {
-					/* VDD_IVA */
-					regulator-name = "smps4";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps5_reg: smps5 {
-					/* VDDS1V8 */
-					regulator-name = "smps5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo1_reg: ldo1 {
-					/* LDO1_OUT --> VDA_PHY1_1V8  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-allow-bypass;
-				};
-
-				ldo2_reg: ldo2 {
-					/* LDO2_OUT --> VDA_PHY2_1V8 */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-allow-bypass;
-					regulator-always-on;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDA_USB_3V3 */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo5_reg: ldo5 {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDD_SDIO_DV */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-			};
-		};
-
-		tps65917_power_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&tps65917>;
-			interrupts = <1 IRQ_TYPE_NONE>;
-			wakeup-source;
-			ti,palmas-long-press-seconds = <6>;
-		};
-	};
-
-	lp87565: lp87565@60 {
-		compatible = "ti,lp87565-q1";
-		reg = <0x60>;
-
-		buck10-in-supply =<&vsys_3v3>;
-		buck23-in-supply =<&vsys_3v3>;
-
-		regulators: regulators {
-			buck10_reg: buck10 {
-				/*VDD_MPU*/
-				regulator-name = "buck10";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck23_reg: buck23 {
-				/* VDD_GPU*/
-				regulator-name = "buck23";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	pcf_lcd: pcf8757@20 {
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-	};
-
-	pcf_gpio_21: pcf8757@21 {
-		compatible = "nxp,pcf8575";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	pcf_hdmi: pcf8575@26 {
-		compatible = "nxp,pcf8575";
-		reg = <0x26>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		hdmi-audio-hog {
-			/* vin6_sel_s0: high: VIN6, low: audio */
-			gpio-hog;
-			gpios = <1 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "vin6_sel_s0";
-		};
-	};
-
-	tlv320aic3106: tlv320aic3106@19 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x19>;
-		adc-settle-ms = <40>;
-		ai3x-micbias-vg = <1>;		/* 2.0V */
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&vio_3v3>;
-		IOVDD-supply = <&vio_3v3>;
-		DRVDD-supply = <&vio_3v3>;
-		DVDD-supply = <&aic_dvdd>;
-	};
-};
-
-&cpu0 {
-	vdd-supply = <&buck10_reg>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vio_3v3_sd>;
-	vqmmc-supply = <&ldo4_reg>;
-	bus-width = <4>;
-	/*
-	 * SDCD signal is not being used here - using the fact that GPIO mode
-	 * is always hardwired.
-	 */
-	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default", "hs";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_hs>;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&vio_1v8>;
-	vqmmc-supply = <&vio_1v8>;
-	bus-width = <8>;
-	non-removable;
-	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
-	pinctrl-0 = <&mmc2_pins_default>;
-	pinctrl-1 = <&mmc2_pins_default>;
-	pinctrl-2 = <&mmc2_pins_default>;
-	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_conf>;
-};
-
-&mmc4 {
-	status = "okay";
-	vmmc-supply = <&vio_3v6>;
-	vqmmc-supply = <&vmmcwl_fixed>;
-	pinctrl-names = "default", "hs", "sdr12", "sdr25";
-	pinctrl-0 = <&mmc4_pins_hs &mmc4_iodelay_default_conf>;
-	pinctrl-1 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
-	pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
-	pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
-};
-
-/* No RTC on this device */
-&rtc {
-	status = "disabled";
-};
-
-&mac_sw {
-	status = "okay";
-};
-
-&cpsw_port1 {
-	phy-handle = <&dp83867_0>;
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
-	phy-handle = <&dp83867_1>;
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-};
-
-&davinci_mdio_sw {
-	dp83867_0: ethernet-phy@2 {
-		reg = <2>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-impedance;
-		ti,dp83867-rxctrl-strap-quirk;
-	};
-
-	dp83867_1: ethernet-phy@3 {
-		reg = <3>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-impedance;
-		ti,dp83867-rxctrl-strap-quirk;
-	};
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldo3_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldo3_reg>;
-};
-
-&dss {
-	status = "okay";
-	vdda_video-supply = <&ldo5_reg>;
-};
-
-&hdmi {
-	status = "okay";
-
-	vdda-supply = <&ldo1_reg>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
-
-&qspi {
-	spi-max-frequency = <96000000>;
-	flash@0 {
-		spi-max-frequency = <96000000>;
-	};
-};
-
-&pcie2_phy {
-	status = "okay";
-};
-
-&pcie1_rc {
-	num-lanes = <2>;
-	phys = <&pcie1_phy>, <&pcie2_phy>;
-	phy-names = "pcie-phy0", "pcie-phy1";
-};
-
-&pcie1_ep {
-	num-lanes = <2>;
-	phys = <&pcie1_phy>, <&pcie2_phy>;
-	phy-names = "pcie-phy0", "pcie-phy1";
-};
-
-&extcon_usb1 {
-	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
-};
-
-&extcon_usb2 {
-	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
-};
-
-&m_can0 {
-	can-transceiver {
-		max-bitrate = <5000000>;
-	};
-};
-
-&ipu2 {
-	status = "okay";
-	memory-region = <&ipu2_cma_pool>;
-};
-
-&ipu1 {
-	status = "okay";
-	memory-region = <&ipu1_cma_pool>;
-};
-
-&dsp1 {
-	status = "okay";
-	memory-region = <&dsp1_cma_pool>;
-};
-
-&dsp2 {
-	status = "okay";
-	memory-region = <&dsp2_cma_pool>;
-};
diff --git a/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi
deleted file mode 100644
index fdca481869160..0000000000000
--- a/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi
+++ /dev/null
@@ -1,285 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018 Texas Instruments
-// MMC IOdelay values for TI's DRA76x and AM576x SoCs.
-// Author: Sekhar Nori <nsekhar@ti.com>
-
-/*
- * Rules for modifying this file:
- * a) Update of this file should typically correspond to a datamanual revision.
- *    Datamanual revision that was used should be updated in comment below.
- *    If there is no update to datamanual, do not update the values. If you
- *    need to use values different from that recommended by the datamanual
- *    for your design, then you should consider adding values to the device-
- *    -tree file for your board directly.
- * b) We keep the mode names as close to the datamanual as possible. So
- *    if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
- *    we follow that in code too.
- * c) If the values change between multiple revisions of silicon, we add
- *    a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
- *    'rev20' for PG 2.0 and so on.
- * d) The node name and node label should be the exact same string. This is
- *    to curb naming creativity and achieve consistency.
- *
- * Datamanual Revisions:
- *
- * DRA76x Silicon Revision 1.0: SPRS993E, Revised December 2018
- *
- */
-
-&dra7_pmx_core {
-	mmc1_pins_default: mmc1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_hs: mmc1_pins_hs {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_sdr50: mmc1_pins_sdr50 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc1_pins_ddr50: mmc1_pins_ddr50 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc2_pins_default: mmc2_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	mmc2_pins_hs200: mmc2_pins_hs200 {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	mmc3_pins_default: mmc3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
-		>;
-	};
-
-	mmc4_pins_hs: mmc4_pins_hs {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
-			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
-			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
-			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
-			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
-			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
-		>;
-	};
-};
-
-&dra7_iodelay_core {
-
-	/* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
-	mmc1_iodelay_ddr_conf: mmc1_iodelay_ddr_conf {
-		pinctrl-pin-array = <
-			0x618 A_DELAY_PS(489) G_DELAY_PS(0)	/* CFG_MMC1_CLK_IN */
-			0x624 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_IN */
-			0x630 A_DELAY_PS(374) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_IN */
-			0x63c A_DELAY_PS(31) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_IN */
-			0x648 A_DELAY_PS(56) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_IN */
-			0x654 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
-			0x620 A_DELAY_PS(1355) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
-			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
-			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
-			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
-			0x638 A_DELAY_PS(0) G_DELAY_PS(4)	/* CFG_MMC1_DAT0_OUT */
-			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
-			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
-			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
-			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
-			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
-			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
-	mmc1_iodelay_sdr104_conf: mmc1_iodelay_sdr104_conf {
-		pinctrl-pin-array = <
-			0x620 A_DELAY_PS(892) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
-			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
-			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
-			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
-			0x638 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
-			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
-			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
-			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
-			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
-			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
-			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
-	mmc2_iodelay_hs200_conf: mmc2_iodelay_hs200_conf {
-		pinctrl-pin-array = <
-			0x190 A_DELAY_PS(384) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
-			0x194 A_DELAY_PS(350) G_DELAY_PS(174)	/* CFG_GPMC_A19_OUT */
-			0x1a8 A_DELAY_PS(410) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
-			0x1ac A_DELAY_PS(335) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
-			0x1b4 A_DELAY_PS(468) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
-			0x1b8 A_DELAY_PS(339) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
-			0x1c0 A_DELAY_PS(676) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
-			0x1c4 A_DELAY_PS(219) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
-			0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154)	/* CFG_GPMC_A23_OUT */
-			0x1d8 A_DELAY_PS(640) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
-			0x1dc A_DELAY_PS(150) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
-			0x1e4 A_DELAY_PS(356) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
-			0x1e8 A_DELAY_PS(150) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
-			0x1f0 A_DELAY_PS(579) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
-			0x1f4 A_DELAY_PS(200) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
-			0x1fc A_DELAY_PS(435) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
-			0x200 A_DELAY_PS(236) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
-			0x364 A_DELAY_PS(759) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
-			0x368 A_DELAY_PS(372) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
-	      >;
-	};
-
-	/* Corresponds to MMC3_MANUAL1 in datamanual */
-	mmc3_iodelay_manual1_conf: mmc3_iodelay_manual1_conf {
-		pinctrl-pin-array = <
-			0x678 A_DELAY_PS(0) G_DELAY_PS(386)	/* CFG_MMC3_CLK_IN */
-			0x680 A_DELAY_PS(605) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
-			0x684 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
-			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
-			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
-			0x690 A_DELAY_PS(171) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
-			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
-			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
-			0x69c A_DELAY_PS(221) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
-			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
-			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
-			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
-			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
-			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
-			0x6b4 A_DELAY_PS(474) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
-			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
-			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC3_MANUAL2 in datamanual */
-	mmc3_iodelay_sdr50_conf: mmc3_iodelay_sdr50_conf {
-		pinctrl-pin-array = <
-			0x678 A_DELAY_PS(852) G_DELAY_PS(0)	/* CFG_MMC3_CLK_IN */
-			0x680 A_DELAY_PS(94) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
-			0x684 A_DELAY_PS(122) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
-			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
-			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
-			0x690 A_DELAY_PS(91) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
-			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
-			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
-			0x69c A_DELAY_PS(57) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
-			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
-			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
-			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
-			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
-			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
-			0x6b4 A_DELAY_PS(375) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
-			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
-			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC4_MANUAL1 in datamanual */
-	mmc4_iodelay_manual1_conf: mmc4_iodelay_manual1_conf {
-		pinctrl-pin-array = <
-			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
-			0x848 A_DELAY_PS(1147) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
-			0x84c A_DELAY_PS(1834) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
-			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
-			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
-			0x870 A_DELAY_PS(2165) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
-			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
-			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
-			0x87c A_DELAY_PS(1929) G_DELAY_PS(64)	/* CFG_UART2_RTSN_IN */
-			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
-			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
-			0x888 A_DELAY_PS(1935) G_DELAY_PS(128)	/* CFG_UART2_RXD_IN */
-			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
-			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
-			0x894 A_DELAY_PS(2172) G_DELAY_PS(44)	/* CFG_UART2_TXD_IN */
-			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
-			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
-		>;
-	};
-
-	/* Corresponds to MMC4_DS_MANUAL1 in datamanual */
-	mmc4_iodelay_default_conf: mmc4_iodelay_default_conf {
-		pinctrl-pin-array = <
-			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
-			0x848 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
-			0x84c A_DELAY_PS(307) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
-			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
-			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
-			0x870 A_DELAY_PS(785) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
-			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
-			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
-			0x87c A_DELAY_PS(613) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
-			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
-			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
-			0x888 A_DELAY_PS(683) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
-			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
-			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
-			0x894 A_DELAY_PS(835) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
-			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
-			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
deleted file mode 100644
index 931db7932c115..0000000000000
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "dra74x.dtsi"
-
-/ {
-	compatible = "ti,dra762", "ti,dra7";
-
-	ocp {
-		target-module@42c01900 {
-			compatible = "ti,sysc-dra7-mcan", "ti,sysc";
-			ranges = <0x0 0x42c00000 0x2000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x42c01900 0x4>,
-			      <0x42c01904 0x4>,
-			      <0x42c01908 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
-					 SYSC_DRA7_MCAN_ENAWAKEUP)>;
-			ti,syss-mask = <1>;
-			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>;
-			clock-names = "fck";
-
-			m_can0: mcan@1a00 {
-				compatible = "bosch,m_can";
-				reg = <0x1a00 0x4000>, <0x0 0x18FC>;
-				reg-names = "m_can", "message_ram";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "int0", "int1";
-				clocks = <&l3_iclk_div>, <&mcan_clk>;
-				clock-names = "hclk", "cclk";
-				bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
-			};
-		};
-	};
-
-};
-
-&l4_per3 {
-	target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
-		compatible = "ti,sysc-omap4", "ti,sysc";
-		reg = <0x1b0000 0x4>,
-		      <0x1b0010 0x4>;
-		reg-names = "rev", "sysc";
-		ti,sysc-midle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>;
-		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>;
-		clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
-		clock-names = "fck";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x1b0000 0x10000>;
-
-		cal: cal@0 {
-			compatible = "ti,dra76-cal";
-			reg = <0x0000 0x400>,
-			      <0x0800 0x40>,
-			      <0x0900 0x40>;
-			reg-names = "cal_top",
-				    "cal_rx_core0",
-				    "cal_rx_core1";
-			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-			ti,camerrx-control = <&scm_conf 0x6dc>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				csi2_0: port@0 {
-					reg = <0>;
-				};
-				csi2_1: port@1 {
-					reg = <1>;
-				};
-			};
-		};
-	};
-};
-
-&scm_conf_clocks {
-	dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x03fc>;
-		ti,bit-shift = <20>;
-		ti,latch-bit = <26>;
-		assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
-		assigned-clock-rates = <80000000>;
-	};
-
-	dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
-		reg = <0x3fc>;
-		ti,bit-shift = <29>;
-		ti,latch-bit = <26>;
-		assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
-		assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
-	};
-
-	mcan_clk: mcan_clk@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
-		ti,bit-shift = <27>;
-		reg = <0x3fc>;
-	};
-};
-
-&rtctarget {
-	status = "disabled";
-};
-
-&usb4_tm {
-	status = "disabled";
-};
-
-&mmc3 {
-	/* dra76x is not affected by i887 */
-	max-frequency = <96000000>;
-};
-
-&cpu0_opp_table {
-	opp_plus@1800000000 {
-		opp-hz = /bits/ 64 <1800000000>;
-		opp-microvolt = <1250000 950000 1250000>,
-				<1250000 950000 1250000>;
-		opp-supported-hw = <0xFF 0x08>;
-	};
-};
-
-&opp_supply_mpu {
-	ti,efuse-settings = <
-	/* uV   offset */
-	1060000 0x0
-	1160000 0x4
-	1210000 0x8
-	1250000 0xC
-	>;
-};
-
-&abb_mpu {
-	ti,abb_info = <
-	/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-	1060000		0	0x0	0 0x02000000 0x01F00000
-	1160000		0	0x4	0 0x02000000 0x01F00000
-	1210000		0	0x8	0 0x02000000 0x01F00000
-	1250000		0	0xC	0 0x02000000 0x01F00000
-	>;
-};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
deleted file mode 100644
index 04a7a6d1d529c..0000000000000
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ /dev/null
@@ -1,2094 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for DRA7xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&cm_core_aon_clocks {
-	atl_clkin0_ck: clock-atl-clkin0 {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clock-output-names = "atl_clkin0_ck";
-		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
-	};
-
-	atl_clkin1_ck: clock-atl-clkin1 {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clock-output-names = "atl_clkin1_ck";
-		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
-	};
-
-	atl_clkin2_ck: clock-atl-clkin2 {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clock-output-names = "atl_clkin2_ck";
-		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
-	};
-
-	atl_clkin3_ck: clock-atl-clkin3 {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clock-output-names = "atl_clkin3_ck";
-		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
-	};
-
-	hdmi_clkin_ck: clock-hdmi-clkin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "hdmi_clkin_ck";
-		clock-frequency = <0>;
-	};
-
-	mlb_clkin_ck: clock-mlb-clkin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "mlb_clkin_ck";
-		clock-frequency = <0>;
-	};
-
-	mlbp_clkin_ck: clock-mlbp-clkin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "mlbp_clkin_ck";
-		clock-frequency = <0>;
-	};
-
-	pciesref_acs_clk_ck: clock-pciesref-acs {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "pciesref_acs_clk_ck";
-		clock-frequency = <100000000>;
-	};
-
-	ref_clkin0_ck: clock-ref-clkin0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "ref_clkin0_ck";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin1_ck: clock-ref-clkin1 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "ref_clkin1_ck";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin2_ck: clock-ref-clkin2 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "ref_clkin2_ck";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin3_ck: clock-ref-clkin3 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "ref_clkin3_ck";
-		clock-frequency = <0>;
-	};
-
-	rmii_clk_ck: clock-rmii {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "rmii_clk_ck";
-		clock-frequency = <0>;
-	};
-
-	sdvenc_clkin_ck: clock-sdvenc-clkin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "sdvenc_clkin_ck";
-		clock-frequency = <0>;
-	};
-
-	secure_32k_clk_src_ck: clock-secure-32k-clk-src {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "secure_32k_clk_src_ck";
-		clock-frequency = <32768>;
-	};
-
-	sys_clk32_crystal_ck: clock-sys-clk32-crystal {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "sys_clk32_crystal_ck";
-		clock-frequency = <32768>;
-	};
-
-	sys_clk32_pseudo_ck: clock-sys-clk32-pseudo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "sys_clk32_pseudo_ck";
-		clocks = <&sys_clkin1>;
-		clock-mult = <1>;
-		clock-div = <610>;
-	};
-
-	virt_12000000_ck: clock-virt-12000000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_12000000_ck";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13000000_ck: clock-virt-13000000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_13000000_ck";
-		clock-frequency = <13000000>;
-	};
-
-	virt_16800000_ck: clock-virt-16800000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_16800000_ck";
-		clock-frequency = <16800000>;
-	};
-
-	virt_19200000_ck: clock-virt-19200000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_19200000_ck";
-		clock-frequency = <19200000>;
-	};
-
-	virt_20000000_ck: clock-virt-20000000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_20000000_ck";
-		clock-frequency = <20000000>;
-	};
-
-	virt_26000000_ck: clock-virt-26000000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_26000000_ck";
-		clock-frequency = <26000000>;
-	};
-
-	virt_27000000_ck: clock-virt-27000000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_27000000_ck";
-		clock-frequency = <27000000>;
-	};
-
-	virt_38400000_ck: clock-virt-38400000 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_38400000_ck";
-		clock-frequency = <38400000>;
-	};
-
-	sys_clkin2: clock-sys-clkin2 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "sys_clkin2";
-		clock-frequency = <22579200>;
-	};
-
-	usb_otg_clkin_ck: clock-usb-otg-clkin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "usb_otg_clkin_ck";
-		clock-frequency = <0>;
-	};
-
-	video1_clkin_ck: clock-video1-clkin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "video1_clkin_ck";
-		clock-frequency = <0>;
-	};
-
-	video1_m2_clkin_ck: clock-video1-m2-clkin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "video1_m2_clkin_ck";
-		clock-frequency = <0>;
-	};
-
-	video2_clkin_ck: clock-video2-clkin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "video2_clkin_ck";
-		clock-frequency = <0>;
-	};
-
-	video2_m2_clkin_ck: clock-video2-m2-clkin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "video2_m2_clkin_ck";
-		clock-frequency = <0>;
-	};
-
-	dpll_abe_ck: clock@1e0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-m4xen-clock";
-		clock-output-names = "dpll_abe_ck";
-		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
-		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
-	};
-
-	dpll_abe_x2_ck: clock-dpll-abe-x2 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_abe_x2_ck";
-		clocks = <&dpll_abe_ck>;
-	};
-
-	dpll_abe_m2x2_ck: clock-dpll-abe-m2x2-8@1f0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_abe_m2x2_ck";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	abe_clk: clock-abe@108 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "abe_clk";
-		clocks = <&dpll_abe_m2x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x0108>;
-		ti,index-power-of-two;
-	};
-
-	dpll_abe_m2_ck: clock-dpll-abe-m2-8@1f0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_abe_m2_ck";
-		clocks = <&dpll_abe_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_abe_m3x2_ck: clock-dpll-abe-m3x2-8@1f4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_abe_m3x2_ck";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_core_byp_mux";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x012c>;
-	};
-
-	dpll_core_ck: clock@120 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-core-clock";
-		clock-output-names = "dpll_core_ck";
-		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
-		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
-	};
-
-	dpll_core_x2_ck: clock-dpll-core-x2 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_core_x2_ck";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_h12x2_ck: clock-dpll-core-h12x2-8@13c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h12x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x013c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_dpll_hs_clk_div: clock-mpu-dpll-hs-clk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "mpu_dpll_hs_clk_div";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_mpu_ck: clock@160 {
-		#clock-cells = <0>;
-		compatible = "ti,omap5-mpu-dpll-clock";
-		clock-output-names = "dpll_mpu_ck";
-		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
-		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
-	};
-
-	dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@170 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_mpu_m2_ck";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0170>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_dclk_div: clock-mpu-dclk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "mpu_dclk_div";
-		clocks = <&dpll_mpu_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dsp_dpll_hs_clk_div: clock-dsp-dpll-hs-clk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dsp_dpll_hs_clk_div";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_dsp_byp_mux";
-		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x0240>;
-	};
-
-	dpll_dsp_ck: clock@234 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_dsp_ck";
-		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
-		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
-		assigned-clocks = <&dpll_dsp_ck>;
-		assigned-clock-rates = <600000000>;
-	};
-
-	dpll_dsp_m2_ck: clock-dpll-dsp-m2-8@244 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_dsp_m2_ck";
-		clocks = <&dpll_dsp_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0244>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_dsp_m2_ck>;
-		assigned-clock-rates = <600000000>;
-	};
-
-	iva_dpll_hs_clk_div: clock-iva-dpll-hs-clk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "iva_dpll_hs_clk_div";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_iva_byp_mux";
-		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x01ac>;
-	};
-
-	dpll_iva_ck: clock@1a0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_iva_ck";
-		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
-		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
-		assigned-clocks = <&dpll_iva_ck>;
-		assigned-clock-rates = <1165000000>;
-	};
-
-	dpll_iva_m2_ck: clock-dpll-iva-m2-8@1b0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_iva_m2_ck";
-		clocks = <&dpll_iva_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_iva_m2_ck>;
-		assigned-clock-rates = <388333334>;
-	};
-
-	iva_dclk: clock-iva-dclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "iva_dclk";
-		clocks = <&dpll_iva_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_gpu_byp_mux";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x02e4>;
-	};
-
-	dpll_gpu_ck: clock@2d8 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_gpu_ck";
-		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
-		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
-		assigned-clocks = <&dpll_gpu_ck>;
-		assigned-clock-rates = <1277000000>;
-	};
-
-	dpll_gpu_m2_ck: clock-dpll-gpu-m2-8@2e8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_gpu_m2_ck";
-		clocks = <&dpll_gpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02e8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_gpu_m2_ck>;
-		assigned-clock-rates = <425666667>;
-	};
-
-	dpll_core_m2_ck: clock-dpll-core-m2-8@130 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m2_ck";
-		clocks = <&dpll_core_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0130>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	core_dpll_out_dclk_div: clock-core-dpll-out-dclk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "core_dpll_out_dclk_div";
-		clocks = <&dpll_core_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_ddr_byp_mux";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x021c>;
-	};
-
-	dpll_ddr_ck: clock@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_ddr_ck";
-		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
-		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
-	};
-
-	dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@220 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_ddr_m2_ck";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0220>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_gmac_byp_mux";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x02b4>;
-	};
-
-	dpll_gmac_ck: clock@2a8 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_gmac_ck";
-		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
-		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
-	};
-
-	dpll_gmac_m2_ck: clock-dpll-gmac-m2-8@2b8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_gmac_m2_ck";
-		clocks = <&dpll_gmac_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02b8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	video2_dclk_div: clock-video2-dclk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "video2_dclk_div";
-		clocks = <&video2_m2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video1_dclk_div: clock-video1-dclk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "video1_dclk_div";
-		clocks = <&video1_m2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdmi_dclk_div: clock-hdmi-dclk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "hdmi_dclk_div";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	per_dpll_hs_clk_div: clock-per-dpll-hs-clk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "per_dpll_hs_clk_div";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usb_dpll_hs_clk_div: clock-usb-dpll-hs-clk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "usb_dpll_hs_clk_div";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	eve_dpll_hs_clk_div: clock-eve-dpll-hs-clk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "eve_dpll_hs_clk_div";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_eve_byp_mux";
-		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x0290>;
-	};
-
-	dpll_eve_ck: clock@284 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_eve_ck";
-		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
-		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
-	};
-
-	dpll_eve_m2_ck: clock-dpll-eve-m2-8@294 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_eve_m2_ck";
-		clocks = <&dpll_eve_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0294>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	eve_dclk_div: clock-eve-dclk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "eve_dclk_div";
-		clocks = <&dpll_eve_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_core_h13x2_ck: clock-dpll-core-h13x2-8@140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h13x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h14x2_ck: clock-dpll-core-h14x2-8@144 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h14x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0144>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h22x2_ck: clock-dpll-core-h22x2-8@154 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h22x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h23x2_ck: clock-dpll-core-h23x2-8@158 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h23x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h24x2_ck: clock-dpll-core-h24x2-8@15c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h24x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_ddr_x2_ck: clock-dpll-ddr-x2 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_ddr_x2_ck";
-		clocks = <&dpll_ddr_ck>;
-	};
-
-	dpll_ddr_h11x2_ck: clock-dpll-ddr-h11x2-8@228 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_ddr_h11x2_ck";
-		clocks = <&dpll_ddr_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0228>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_dsp_x2_ck: clock-dpll-dsp-x2 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_dsp_x2_ck";
-		clocks = <&dpll_dsp_ck>;
-	};
-
-	dpll_dsp_m3x2_ck: clock-dpll-dsp-m3x2-8@248 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_dsp_m3x2_ck";
-		clocks = <&dpll_dsp_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0248>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_dsp_m3x2_ck>;
-		assigned-clock-rates = <400000000>;
-	};
-
-	dpll_gmac_x2_ck: clock-dpll-gmac-x2 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_gmac_x2_ck";
-		clocks = <&dpll_gmac_ck>;
-	};
-
-	dpll_gmac_h11x2_ck: clock-dpll-gmac-h11x2-8@2c0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_gmac_h11x2_ck";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_h12x2_ck: clock-dpll-gmac-h12x2-8@2c4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_gmac_h12x2_ck";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_h13x2_ck: clock-dpll-gmac-h13x2-8@2c8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_gmac_h13x2_ck";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_m3x2_ck: clock-dpll-gmac-m3x2-8@2bc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_gmac_m3x2_ck";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02bc>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	gmii_m_clk_div: clock-gmii-m-clk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "gmii_m_clk_div";
-		clocks = <&dpll_gmac_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	hdmi_clk2_div: clock-hdmi-clk2-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "hdmi_clk2_div";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdmi_div_clk: clock-hdmi-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "hdmi_div_clk";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3_iclk_div: clock-l3-iclk-div-4@100 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "l3_iclk_div";
-		ti,max-div = <2>;
-		ti,bit-shift = <4>;
-		reg = <0x0100>;
-		clocks = <&dpll_core_h12x2_ck>;
-		ti,index-power-of-two;
-	};
-
-	l4_root_clk_div: clock-l4-root-clk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "l4_root_clk_div";
-		clocks = <&l3_iclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	video1_clk2_div: clock-video1-clk2-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "video1_clk2_div";
-		clocks = <&video1_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video1_div_clk: clock-video1-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "video1_div_clk";
-		clocks = <&video1_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video2_clk2_div: clock-video2-clk2-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "video2_clk2_div";
-		clocks = <&video2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video2_div_clk: clock-video2-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "video2_div_clk";
-		clocks = <&video2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dummy_ck: clock-dummy {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "dummy_ck";
-		clock-frequency = <0>;
-	};
-};
-&prm_clocks {
-	sys_clkin1: clock-sys-clkin1@110 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "sys_clkin1";
-		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
-		reg = <0x0110>;
-		ti,index-starts-at-one;
-	};
-
-	abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "abe_dpll_sys_clk_mux";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0118>;
-	};
-
-	abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "abe_dpll_bypass_clk_mux";
-		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
-		reg = <0x0114>;
-	};
-
-	abe_dpll_clk_mux: clock-abe-dpll-clk-mux@10c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "abe_dpll_clk_mux";
-		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
-		reg = <0x010c>;
-	};
-
-	abe_24m_fclk: clock-abe-24m@11c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "abe_24m_fclk";
-		clocks = <&dpll_abe_m2x2_ck>;
-		reg = <0x011c>;
-		ti,dividers = <8>, <16>;
-	};
-
-	aess_fclk: clock-aess@178 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "aess_fclk";
-		clocks = <&abe_clk>;
-		reg = <0x0178>;
-		ti,max-div = <2>;
-	};
-
-	abe_giclk_div: clock-abe-giclk-div@174 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "abe_giclk_div";
-		clocks = <&aess_fclk>;
-		reg = <0x0174>;
-		ti,max-div = <2>;
-	};
-
-	abe_lp_clk_div: clock-abe-lp-clk-div@1d8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "abe_lp_clk_div";
-		clocks = <&dpll_abe_m2x2_ck>;
-		reg = <0x01d8>;
-		ti,dividers = <16>, <32>;
-	};
-
-	abe_sys_clk_div: clock-abe-sys-clk-div@120 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "abe_sys_clk_div";
-		clocks = <&sys_clkin1>;
-		reg = <0x0120>;
-		ti,max-div = <2>;
-	};
-
-	adc_gfclk_mux: clock-adc-gfclk-mux@1dc {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "adc_gfclk_mux";
-		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
-		reg = <0x01dc>;
-	};
-
-	sys_clk1_dclk_div: clock-sys-clk1-dclk-div@1c8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "sys_clk1_dclk_div";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x01c8>;
-		ti,index-power-of-two;
-	};
-
-	sys_clk2_dclk_div: clock-sys-clk2-dclk-div@1cc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "sys_clk2_dclk_div";
-		clocks = <&sys_clkin2>;
-		ti,max-div = <64>;
-		reg = <0x01cc>;
-		ti,index-power-of-two;
-	};
-
-	per_abe_x1_dclk_div: clock-per-abe-x1-dclk-div@1bc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "per_abe_x1_dclk_div";
-		clocks = <&dpll_abe_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01bc>;
-		ti,index-power-of-two;
-	};
-
-	dsp_gclk_div: clock-dsp-gclk-div@18c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dsp_gclk_div";
-		clocks = <&dpll_dsp_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x018c>;
-		ti,index-power-of-two;
-	};
-
-	gpu_dclk: clock-gpu-dclk@1a0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "gpu_dclk";
-		clocks = <&dpll_gpu_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01a0>;
-		ti,index-power-of-two;
-	};
-
-	emif_phy_dclk_div: clock-emif-phy-dclk-div@190 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "emif_phy_dclk_div";
-		clocks = <&dpll_ddr_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x0190>;
-		ti,index-power-of-two;
-	};
-
-	gmac_250m_dclk_div: clock-gmac-250m-dclk-div@19c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "gmac_250m_dclk_div";
-		clocks = <&dpll_gmac_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x019c>;
-		ti,index-power-of-two;
-	};
-
-	gmac_main_clk: clock-gmac-main {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "gmac_main_clk";
-		clocks = <&gmac_250m_dclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l3init_480m_dclk_div: clock-l3init-480m-dclk-div@1ac {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "l3init_480m_dclk_div";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01ac>;
-		ti,index-power-of-two;
-	};
-
-	usb_otg_dclk_div: clock-usb-otg-dclk-div@184 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "usb_otg_dclk_div";
-		clocks = <&usb_otg_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0184>;
-		ti,index-power-of-two;
-	};
-
-	sata_dclk_div: clock-sata-dclk-div@1c0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "sata_dclk_div";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x01c0>;
-		ti,index-power-of-two;
-	};
-
-	pcie2_dclk_div: clock-pcie2-dclk-div@1b8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "pcie2_dclk_div";
-		clocks = <&dpll_pcie_ref_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01b8>;
-		ti,index-power-of-two;
-	};
-
-	pcie_dclk_div: clock-pcie-dclk-div@1b4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "pcie_dclk_div";
-		clocks = <&apll_pcie_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01b4>;
-		ti,index-power-of-two;
-	};
-
-	emu_dclk_div: clock-emu-dclk-div@194 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "emu_dclk_div";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x0194>;
-		ti,index-power-of-two;
-	};
-
-	secure_32k_dclk_div: clock-secure-32k-dclk-div@1c4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "secure_32k_dclk_div";
-		clocks = <&secure_32k_clk_src_ck>;
-		ti,max-div = <64>;
-		reg = <0x01c4>;
-		ti,index-power-of-two;
-	};
-
-	clkoutmux0_clk_mux: clock-clkoutmux0-clk-mux@158 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "clkoutmux0_clk_mux";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x0158>;
-	};
-
-	clkoutmux1_clk_mux: clock-clkoutmux1-clk-mux@15c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "clkoutmux1_clk_mux";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x015c>;
-	};
-
-	clkoutmux2_clk_mux: clock-clkoutmux2-clk-mux@160 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "clkoutmux2_clk_mux";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x0160>;
-	};
-
-	custefuse_sys_gfclk_div: clock-custefuse-sys-gfclk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "custefuse_sys_gfclk_div";
-		clocks = <&sys_clkin1>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	eve_clk: clock-eve@180 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "eve_clk";
-		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
-		reg = <0x0180>;
-	};
-
-	hdmi_dpll_clk_mux: clock-hdmi-dpll-clk-mux@164 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "hdmi_dpll_clk_mux";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0164>;
-	};
-
-	mlb_clk: clock-mlb@134 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "mlb_clk";
-		clocks = <&mlb_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0134>;
-		ti,index-power-of-two;
-	};
-
-	mlbp_clk: clock-mlbp@130 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "mlbp_clk";
-		clocks = <&mlbp_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0130>;
-		ti,index-power-of-two;
-	};
-
-	per_abe_x1_gfclk2_div: clock-per-abe-x1-gfclk2-div@138 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "per_abe_x1_gfclk2_div";
-		clocks = <&dpll_abe_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x0138>;
-		ti,index-power-of-two;
-	};
-
-	timer_sys_clk_div: clock-timer-sys-clk-div@144 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "timer_sys_clk_div";
-		clocks = <&sys_clkin1>;
-		reg = <0x0144>;
-		ti,max-div = <2>;
-	};
-
-	video1_dpll_clk_mux: clock-video1-dpll-clk-mux@168 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "video1_dpll_clk_mux";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0168>;
-	};
-
-	video2_dpll_clk_mux: clock-video2-dpll-clk-mux@16c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "video2_dpll_clk_mux";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x016c>;
-	};
-
-	wkupaon_iclk_mux: clock-wkupaon-iclk-mux@108 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "wkupaon_iclk_mux";
-		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
-		reg = <0x0108>;
-	};
-};
-
-&cm_core_clocks {
-	dpll_pcie_ref_ck: clock@200 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_pcie_ref_ck";
-		clocks = <&sys_clkin1>, <&sys_clkin1>;
-		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
-	};
-
-	dpll_pcie_ref_m2ldo_ck: clock-dpll-pcie-ref-m2ldo-8@210 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_pcie_ref_m2ldo_ck";
-		clocks = <&dpll_pcie_ref_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	apll_pcie_in_clk_mux: clock-apll-pcie-in-clk-mux-7@4ae06118 {
-		compatible = "ti,mux-clock";
-		clock-output-names = "apll_pcie_in_clk_mux";
-		clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
-		#clock-cells = <0>;
-		reg = <0x021c 0x4>;
-		ti,bit-shift = <7>;
-	};
-
-	apll_pcie_ck: clock@21c {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-apll-clock";
-		clock-output-names = "apll_pcie_ck";
-		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
-		reg = <0x021c>, <0x0220>;
-	};
-
-	optfclk_pciephy_div: clock-optfclk-pciephy-div-8@4a00821c {
-		compatible = "ti,divider-clock";
-		clock-output-names = "optfclk_pciephy_div";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x021c>;
-		ti,dividers = <2>, <1>;
-		ti,bit-shift = <8>;
-		ti,max-div = <2>;
-	};
-
-	apll_pcie_clkvcoldo: clock-apll-pcie-clkvcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "apll_pcie_clkvcoldo";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	apll_pcie_clkvcoldo_div: clock-apll-pcie-clkvcoldo-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "apll_pcie_clkvcoldo_div";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	apll_pcie_m2_ck: clock-apll-pcie-m2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "apll_pcie_m2_ck";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_per_byp_mux";
-		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x014c>;
-	};
-
-	dpll_per_ck: clock@140 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_per_ck";
-		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
-		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
-	};
-
-	dpll_per_m2_ck: clock-dpll-per-m2-8@150 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_m2_ck";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	func_96m_aon_dclk_div: clock-func-96m-aon-dclk-div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_96m_aon_dclk_div";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_usb_byp_mux";
-		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x018c>;
-	};
-
-	dpll_usb_ck: clock@180 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-j-type-clock";
-		clock-output-names = "dpll_usb_ck";
-		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
-		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
-	};
-
-	dpll_usb_m2_ck: clock-dpll-usb-m2-8@190 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_usb_m2_ck";
-		clocks = <&dpll_usb_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0190>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_pcie_ref_m2_ck: clock-dpll-pcie-ref-m2-8@210 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_pcie_ref_m2_ck";
-		clocks = <&dpll_pcie_ref_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_x2_ck: clock-dpll-per-x2 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_per_x2_ck";
-		clocks = <&dpll_per_ck>;
-	};
-
-	dpll_per_h11x2_ck: clock-dpll-per-h11x2-8@158 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_h11x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h12x2_ck: clock-dpll-per-h12x2-8@15c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_h12x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h13x2_ck: clock-dpll-per-h13x2-8@160 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_h13x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0160>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h14x2_ck: clock-dpll-per-h14x2-8@164 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_h14x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0164>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m2x2_ck: clock-dpll-per-m2x2-8@150 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_m2x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_clkdcoldo: clock-dpll-usb-clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dpll_usb_clkdcoldo";
-		clocks = <&dpll_usb_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	func_128m_clk: clock-func-128m {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_128m_clk";
-		clocks = <&dpll_per_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	func_12m_fclk: clock-func-12m-fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_12m_fclk";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	func_24m_clk: clock-func-24m {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_24m_clk";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_48m_fclk: clock-func-48m-fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_48m_fclk";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_96m_fclk: clock-func-96m-fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_96m_fclk";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l3init_60m_fclk: clock-l3init-60m@104 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "l3init_60m_fclk";
-		clocks = <&dpll_usb_m2_ck>;
-		reg = <0x0104>;
-		ti,dividers = <1>, <8>;
-	};
-
-	clkout2_clk: clock-clkout2-8@6b0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "clkout2_clk";
-		clocks = <&clkoutmux2_clk_mux>;
-		ti,bit-shift = <8>;
-		reg = <0x06b0>;
-	};
-
-	l3init_960m_gfclk: clock-l3init-960m-gfclk-8@6c0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "l3init_960m_gfclk";
-		clocks = <&dpll_usb_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x06c0>;
-	};
-
-	usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@640 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "usb_phy1_always_on_clk32k";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0640>;
-	};
-
-	usb_phy2_always_on_clk32k: clock-usb-phy2-always-on-clk32k-8@688 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "usb_phy2_always_on_clk32k";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0688>;
-	};
-
-	usb_phy3_always_on_clk32k: clock-usb-phy3-always-on-clk32k-8@698 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "usb_phy3_always_on_clk32k";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0698>;
-	};
-
-	gpu_core_gclk_mux: clock-gpu-core-gclk-mux-24@1220 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "gpu_core_gclk_mux";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1220>;
-		assigned-clocks = <&gpu_core_gclk_mux>;
-		assigned-clock-parents = <&dpll_gpu_m2_ck>;
-	};
-
-	gpu_hyd_gclk_mux: clock-gpu-hyd-gclk-mux-26@1220 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "gpu_hyd_gclk_mux";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
-		ti,bit-shift = <26>;
-		reg = <0x1220>;
-		assigned-clocks = <&gpu_hyd_gclk_mux>;
-		assigned-clock-parents = <&dpll_gpu_m2_ck>;
-	};
-
-	l3instr_ts_gclk_div: clock-l3instr-ts-gclk-div-24@e50 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "l3instr_ts_gclk_div";
-		clocks = <&wkupaon_iclk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0e50>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	vip1_gclk_mux: clock-vip1-gclk-mux-24@1020 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "vip1_gclk_mux";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1020>;
-	};
-
-	vip2_gclk_mux: clock-vip2-gclk-mux-24@1028 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "vip2_gclk_mux";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1028>;
-	};
-
-	vip3_gclk_mux: clock-vip3-gclk-mux-24@1030 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "vip3_gclk_mux";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1030>;
-	};
-};
-
-&cm_core_clockdomains {
-	coreaon_clkdm: clock-coreaon-clkdm {
-		compatible = "ti,clockdomain";
-		clock-output-names = "coreaon_clkdm";
-		clocks = <&dpll_usb_ck>;
-	};
-};
-
-&scm_conf_clocks {
-	dss_deshdcp_clk: clock-dss-deshdcp-0@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "dss_deshdcp_clk";
-		clocks = <&l3_iclk_div>;
-		ti,bit-shift = <0>;
-		reg = <0x558>;
-	};
-
-       ehrpwm0_tbclk: clock-ehrpwm0-tbclk-20@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "ehrpwm0_tbclk";
-		clocks = <&l4_root_clk_div>;
-		ti,bit-shift = <20>;
-		reg = <0x0558>;
-	};
-
-	ehrpwm1_tbclk: clock-ehrpwm1-tbclk-21@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "ehrpwm1_tbclk";
-		clocks = <&l4_root_clk_div>;
-		ti,bit-shift = <21>;
-		reg = <0x0558>;
-	};
-
-	ehrpwm2_tbclk: clock-ehrpwm2-tbclk-22@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "ehrpwm2_tbclk";
-		clocks = <&l4_root_clk_div>;
-		ti,bit-shift = <22>;
-		reg = <0x0558>;
-	};
-
-	sys_32k_ck: clock-sys-32k {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "sys_32k_ck";
-		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x6c4>;
-	};
-};
-
-&cm_core_aon {
-	mpu_cm: clock@300 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "mpu_cm";
-		reg = <0x300 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x300 0x100>;
-
-		mpu_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "mpu_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	dsp1_cm: clock@400 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "dsp1_cm";
-		reg = <0x400 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x400 0x100>;
-
-		dsp1_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "dsp1_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	ipu_cm: clock@500 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "ipu_cm";
-		reg = <0x500 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x500 0x100>;
-
-		ipu1_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "ipu1_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-			assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>;
-			assigned-clock-parents = <&dpll_core_h22x2_ck>;
-		};
-
-		ipu_clkctrl: clock@50 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "ipu_clkctrl";
-			reg = <0x50 0x34>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	dsp2_cm: clock@600 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "dsp2_cm";
-		reg = <0x600 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x600 0x100>;
-
-		dsp2_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "dsp2_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	rtc_cm: clock@700 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "rtc_cm";
-		reg = <0x700 0x60>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x700 0x60>;
-
-		rtc_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "rtc_clkctrl";
-			reg = <0x20 0x28>;
-			#clock-cells = <2>;
-		};
-	};
-
-	vpe_cm: clock@760 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "vpe_cm";
-		reg = <0x760 0xc>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x760 0xc>;
-
-		vpe_clkctrl: clock@0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "vpe_clkctrl";
-			reg = <0x0 0xc>;
-			#clock-cells = <2>;
-		};
-	};
-
-};
-
-&cm_core {
-	coreaon_cm: clock@600 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "coreaon_cm";
-		reg = <0x600 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x600 0x100>;
-
-		coreaon_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "coreaon_clkctrl";
-			reg = <0x20 0x1c>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3main1_cm: clock@700 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3main1_cm";
-		reg = <0x700 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x700 0x100>;
-
-		l3main1_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3main1_clkctrl";
-			reg = <0x20 0x74>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	ipu2_cm: clock@900 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "ipu2_cm";
-		reg = <0x900 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x900 0x100>;
-
-		ipu2_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "ipu2_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	dma_cm: clock@a00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "dma_cm";
-		reg = <0xa00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xa00 0x100>;
-
-		dma_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "dma_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	emif_cm: clock@b00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "emif_cm";
-		reg = <0xb00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xb00 0x100>;
-
-		emif_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "emif_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	atl_cm: clock@c00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "atl_cm";
-		reg = <0xc00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xc00 0x100>;
-
-		atl_clkctrl: clock@0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "atl_clkctrl";
-			reg = <0x0 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4cfg_cm: clock@d00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l4cfg_cm";
-		reg = <0xd00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xd00 0x100>;
-
-		l4cfg_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4cfg_clkctrl";
-			reg = <0x20 0x84>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3instr_cm: clock@e00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3instr_cm";
-		reg = <0xe00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xe00 0x100>;
-
-		l3instr_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3instr_clkctrl";
-			reg = <0x20 0xc>;
-			#clock-cells = <2>;
-		};
-	};
-
-	iva_cm: clock@f00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "iva_cm";
-		reg = <0xf00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xf00 0x100>;
-
-		iva_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "iva_clkctrl";
-			reg = <0x20 0xc>;
-			#clock-cells = <2>;
-		};
-	};
-
-	cam_cm: clock@1000 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "cam_cm";
-		reg = <0x1000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1000 0x100>;
-
-		cam_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "cam_clkctrl";
-			reg = <0x20 0x2c>;
-			#clock-cells = <2>;
-		};
-	};
-
-	dss_cm: clock@1100 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "dss_cm";
-		reg = <0x1100 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1100 0x100>;
-
-		dss_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "dss_clkctrl";
-			reg = <0x20 0x14>;
-			#clock-cells = <2>;
-		};
-	};
-
-	gpu_cm: clock@1200 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "gpu_cm";
-		reg = <0x1200 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1200 0x100>;
-
-		gpu_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "gpu_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3init_cm: clock@1300 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3init_cm";
-		reg = <0x1300 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1300 0x100>;
-
-		l3init_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3init_clkctrl";
-			reg = <0x20 0x6c>, <0xe0 0x14>;
-			#clock-cells = <2>;
-		};
-
-		pcie_clkctrl: clock@b0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "pcie_clkctrl";
-			reg = <0xb0 0xc>;
-			#clock-cells = <2>;
-		};
-
-		gmac_clkctrl: clock@d0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "gmac_clkctrl";
-			reg = <0xd0 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	l4per_cm: clock@1700 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l4per_cm";
-		reg = <0x1700 0x300>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1700 0x300>;
-
-		l4per_clkctrl: clock@28 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4per_clkctrl";
-			reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>;
-			#clock-cells = <2>;
-
-			assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
-			assigned-clock-parents = <&abe_24m_fclk>;
-		};
-
-		l4sec_clkctrl: clock@1a0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4sec_clkctrl";
-			reg = <0x1a0 0x2c>;
-			#clock-cells = <2>;
-		};
-
-		l4per2_clkctrl: clock@c {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4per2_clkctrl";
-			reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>;
-			#clock-cells = <2>;
-		};
-
-		l4per3_clkctrl: clock@14 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4per3_clkctrl";
-			reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-};
-
-&prm {
-	wkupaon_cm: clock@1800 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "wkupaon_cm";
-		reg = <0x1800 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1800 0x100>;
-
-		wkupaon_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "wkupaon_clkctrl";
-			reg = <0x20 0x6c>;
-			#clock-cells = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
deleted file mode 100644
index dd03e3860f97f..0000000000000
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ /dev/null
@@ -1,320 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 Andreas Kemnade
- * based on works
- * Copyright 2016 Freescale Semiconductor, Inc.
- * and
- * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
- *
- * Netronix E60K02 board common.
- * This board is equipped with different SoCs and
- * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
- * the Tolino Shine 3 (with i.MX6SL)
- */
-#include <dt-bindings/input/input.h>
-
-/ {
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	gpio_keys: gpio-keys {
-		compatible = "gpio-keys";
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		key-cover {
-			label = "Cover";
-			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-			linux,code = <SW_LID>;
-			linux,input-type = <EV_SW>;
-			wakeup-source;
-		};
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-
-		led {
-			label = "e60k02:white:on";
-			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reg_wifi: regulator-wifi {
-		compatible = "regulator-fixed";
-		regulator-name = "SD3_SPWR";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		post-power-on-delay-ms = <20>;
-		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	};
-};
-
-
-&i2c1 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	lm3630a: backlight@36 {
-		reg = <0x36>;
-		compatible = "ti,lm3630a";
-		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@0 {
-			reg = <0>;
-			led-sources = <0>;
-			label = "backlight_warm";
-			default-brightness = <0>;
-			max-brightness = <255>;
-		};
-
-		led@1 {
-			reg = <1>;
-			led-sources = <1>;
-			label = "backlight_cold";
-			default-brightness = <0>;
-			max-brightness = <255>;
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	touchscreen@24 {
-		compatible = "cypress,tt21000";
-		reg = <0x24>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
-		vdd-supply = <&ldo5_reg>;
-	};
-
-	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
-
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	ricoh619: pmic@32 {
-		compatible = "ricoh,rc5t619";
-		reg = <0x32>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-		system-power-controller;
-
-		regulators {
-			dcdc1_reg: DCDC1 {
-				regulator-name = "DCDC1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <900000>;
-					regulator-suspend-min-microvolt = <900000>;
-				};
-			};
-
-			/* Core3_3V3 */
-			dcdc2_reg: DCDC2 {
-				regulator-name = "DCDC2";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <3300000>;
-					regulator-suspend-min-microvolt = <3300000>;
-				};
-			};
-
-			dcdc3_reg: DCDC3 {
-				regulator-name = "DCDC3";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <1140000>;
-					regulator-suspend-min-microvolt = <1140000>;
-				};
-			};
-
-			/* Core4_1V2 */
-			dcdc4_reg: DCDC4 {
-				regulator-name = "DCDC4";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <1140000>;
-					regulator-suspend-min-microvolt = <1140000>;
-				};
-			};
-
-			/* Core4_1V8 */
-			dcdc5_reg: DCDC5 {
-				regulator-name = "DCDC5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <1700000>;
-					regulator-suspend-min-microvolt = <1700000>;
-				};
-			};
-
-			/* IR_3V3 */
-			ldo1_reg: LDO1  {
-				regulator-name = "LDO1";
-				regulator-boot-on;
-			};
-
-			/* Core1_3V3 */
-			ldo2_reg: LDO2  {
-				regulator-name = "LDO2";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <3000000>;
-					regulator-suspend-min-microvolt = <3000000>;
-				};
-			};
-
-			/* Core5_1V2 */
-			ldo3_reg: LDO3  {
-				regulator-name = "LDO3";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "LDO4";
-				regulator-boot-on;
-			};
-
-			/* SPD_3V3 */
-			ldo5_reg: LDO5 {
-				regulator-name = "LDO5";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* DDR_0V6 */
-			ldo6_reg: LDO6 {
-				regulator-name = "LDO6";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* VDD_PWM */
-			ldo7_reg: LDO7 {
-				regulator-name = "LDO7";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* ldo_1v8 */
-			ldo8_reg: LDO8 {
-				regulator-name = "LDO8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "LDO9";
-				regulator-boot-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "LDO10";
-				regulator-boot-on;
-			};
-
-			ldortc1_reg: LDORTC1  {
-				regulator-name = "LDORTC1";
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&snvs_rtc {
-	/* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
-	status = "disabled";
-};
-
-&uart1 {
-	/* J4, through-hole */
-	status = "okay";
-};
-
-&uart4 {
-	/* TP198, next to J4, SMD pads */
-	status = "okay";
-};
-
-&usdhc2 {
-	non-removable;
-	status = "okay";
-};
-
-&usdhc3 {
-	vmmc-supply = <&reg_wifi>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	cap-power-off-card;
-	non-removable;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	disable-over-current;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/e70k02.dtsi
deleted file mode 100644
index 4e1bf080eaca0..0000000000000
--- a/arch/arm/boot/dts/e70k02.dtsi
+++ /dev/null
@@ -1,330 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2021 Andreas Kemnade
- * based on works
- * Copyright 2016 Freescale Semiconductor, Inc.
- * and
- * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
- *
- * Netronix E70K02 board common.
- * This board is equipped with different SoCs and
- * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
- * the Tolino Shine 3 (with i.MX6SL)
- */
-#include <dt-bindings/input/input.h>
-
-/ {
-	aliases {
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc3;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	gpio_keys: gpio-keys {
-		compatible = "gpio-keys";
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		key-cover {
-			label = "Cover";
-			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
-			linux,code = <SW_LID>;
-			linux,input-type = <EV_SW>;
-			wakeup-source;
-		};
-
-		key-pageup {
-			label = "PageUp";
-			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PAGEUP>;
-		};
-
-		key-pagedown {
-			label = "PageDown";
-			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PAGEDOWN>;
-		};
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-
-		led {
-			label = "e70k02:white:on";
-			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reg_wifi: regulator-wifi {
-		compatible = "regulator-fixed";
-		regulator-name = "SD3_SPWR";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		post-power-on-delay-ms = <20>;
-		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	lm3630a: backlight@36 {
-		reg = <0x36>;
-		compatible = "ti,lm3630a";
-		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@0 {
-			reg = <0>;
-			led-sources = <0>;
-			label = "backlight_warm";
-			default-brightness = <0>;
-			max-brightness = <255>;
-		};
-
-		led@1 {
-			reg = <1>;
-			led-sources = <1>;
-			label = "backlight_cold";
-			default-brightness = <0>;
-			max-brightness = <255>;
-		};
-	};
-
-	/* TODO: KX122 acceleration sensor a 0x1e */
-
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	touchscreen@24 {
-		compatible = "cypress,tt21000";
-		reg = <0x24>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
-		vdd-supply = <&ldo5_reg>;
-	};
-
-	/* TODO: SY7636 PMIC for E Ink at 0x62 */
-
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	ricoh619: pmic@32 {
-		compatible = "ricoh,rc5t619";
-		reg = <0x32>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
-		system-power-controller;
-
-		regulators {
-			dcdc1_reg: DCDC1 {
-				regulator-name = "DCDC1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <900000>;
-					regulator-suspend-min-microvolt = <900000>;
-				};
-			};
-
-			/* Core3_3V3 */
-			dcdc2_reg: DCDC2 {
-				regulator-name = "DCDC2";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <3300000>;
-					regulator-suspend-min-microvolt = <3300000>;
-				};
-			};
-
-			dcdc3_reg: DCDC3 {
-				regulator-name = "DCDC3";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <1140000>;
-					regulator-suspend-min-microvolt = <1140000>;
-				};
-			};
-
-			/* Core4_1V2 */
-			dcdc4_reg: DCDC4 {
-				regulator-name = "DCDC4";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <1140000>;
-					regulator-suspend-min-microvolt = <1140000>;
-				};
-			};
-
-			/* Core4_1V8 */
-			dcdc5_reg: DCDC5 {
-				regulator-name = "DCDC5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <1700000>;
-					regulator-suspend-min-microvolt = <1700000>;
-				};
-			};
-
-			ldo1_reg: LDO1  {
-				regulator-name = "LDO1";
-				regulator-boot-on;
-			};
-
-			/* Core1_3V3 */
-			ldo2_reg: LDO2  {
-				regulator-name = "LDO2";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <3000000>;
-					regulator-suspend-min-microvolt = <3000000>;
-				};
-			};
-
-			/* Core5_1V2 */
-			ldo3_reg: LDO3  {
-				regulator-name = "LDO3";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "LDO4";
-				regulator-boot-on;
-			};
-
-			/* SPD_3V3 */
-			ldo5_reg: LDO5 {
-				regulator-name = "LDO5";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* DDR_0V6 */
-			ldo6_reg: LDO6 {
-				regulator-name = "LDO6";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* VDD_PWM */
-			ldo7_reg: LDO7 {
-				regulator-name = "LDO7";
-				regulator-boot-on;
-			};
-
-			/* ldo_1v8 */
-			ldo8_reg: LDO8 {
-				regulator-name = "LDO8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "LDO9";
-				regulator-boot-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "LDO10";
-				regulator-boot-on;
-			};
-
-			ldortc1_reg: LDORTC1  {
-				regulator-name = "LDORTC1";
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&snvs_rtc {
-	/* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
-	status = "disabled";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&usdhc1 {
-	non-removable;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc3 {
-	vmmc-supply = <&reg_wifi>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	cap-power-off-card;
-	non-removable;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	disable-over-current;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
deleted file mode 100644
index f6eb71553b952..0000000000000
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- */
-
-/dts-v1/;
-
-/* First 4KB has pen for secondary cores. */
-/memreserve/ 0x00000000 0x0001000;
-
-/ {
-	model = "Calxeda ECX-2000";
-	compatible = "calxeda,ecx-2000";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <3>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-	};
-
-	memory@0 {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0xff800000>;
-	};
-
-	memory@200000000 {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x00000002 0x00000000 0x00000003 0x00000000>;
-	};
-
-	soc {
-		ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>;
-
-		timer {
-			compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; 			interrupts = <1 13 0xf08>,
-				<1 14 0xf08>,
-				<1 11 0xf08>,
-				<1 10 0xf08>;
-		};
-
-		memory-controller@fff00000 {
-			compatible = "calxeda,ecx-2000-ddr-ctrl";
-			reg = <0xfff00000 0x1000>;
-			interrupts = <0 91 4>;
-		};
-
-		intc: interrupt-controller@fff11000 {
-			compatible = "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			interrupts = <1 9 0xf04>;
-			reg = <0xfff11000 0x1000>,
-			      <0xfff12000 0x2000>,
-			      <0xfff14000 0x2000>,
-			      <0xfff16000 0x2000>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
-		};
-	};
-};
-
-/include/ "ecx-common.dtsi"
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
deleted file mode 100644
index ce5221c6b358e..0000000000000
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ /dev/null
@@ -1,231 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- */
-
-/ {
-	chosen {
-		bootargs = "console=ttyAMA0";
-	};
-
-	psci {
-		compatible = "arm,psci";
-		method = "smc";
-		cpu_suspend = <0x84000002>;
-		cpu_off = <0x84000004>;
-		cpu_on = <0x84000006>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-
-		sata@ffe08000 {
-			compatible = "calxeda,hb-ahci";
-			reg = <0xffe08000 0x10000>;
-			interrupts = <0 83 4>;
-			dma-coherent;
-			calxeda,port-phys = < &combophy5 0>, <&combophy0 0>,
-					     <&combophy0 1>, <&combophy0 2>,
-					     <&combophy0 3>;
-			calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>,
-					    <&gpioh 7 1>;
-			calxeda,led-order = <4 0 1 2 3>;
-		};
-
-		sdhci@ffe0e000 {
-			compatible = "calxeda,hb-sdhci";
-			reg = <0xffe0e000 0x1000>;
-			interrupts = <0 90 4>;
-			clocks = <&eclk>;
-			status = "disabled";
-		};
-
-		ipc@fff20000 {
-			compatible = "arm,pl320", "arm,primecell";
-			reg = <0xfff20000 0x1000>;
-			interrupts = <0 7 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpioe: gpio@fff30000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff30000 0x1000>;
-			interrupts = <0 14 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		gpiof: gpio@fff31000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff31000 0x1000>;
-			interrupts = <0 15 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		gpiog: gpio@fff32000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff32000 0x1000>;
-			interrupts = <0 16 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		gpioh: gpio@fff33000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff33000 0x1000>;
-			interrupts = <0 17 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		timer@fff34000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0xfff34000 0x1000>;
-			interrupts = <0 18 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		rtc@fff35000 {
-			compatible = "arm,pl031", "arm,primecell";
-			reg = <0xfff35000 0x1000>;
-			interrupts = <0 19 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		serial@fff36000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xfff36000 0x1000>;
-			interrupts = <0 20 4>;
-			clocks = <&pclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		smic@fff3a000 {
-			compatible = "ipmi-smic";
-			device_type = "ipmi";
-			reg = <0xfff3a000 0x1000>;
-			interrupts = <0 24 4>;
-			reg-size = <4>;
-			reg-spacing = <4>;
-		};
-
-		sregs@fff3c000 {
-			compatible = "calxeda,hb-sregs";
-			reg = <0xfff3c000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				osc: oscillator {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <33333000>;
-				};
-
-				ddrpll: ddrpll {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-pll-clock";
-					clocks = <&osc>;
-					reg = <0x108>;
-				};
-
-				a9pll: a9pll {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-pll-clock";
-					clocks = <&osc>;
-					reg = <0x100>;
-				};
-
-				a9periphclk: a9periphclk {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-a9periph-clock";
-					clocks = <&a9pll>;
-					reg = <0x104>;
-				};
-
-				a9bclk: a9bclk {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-a9bus-clock";
-					clocks = <&a9pll>;
-					reg = <0x104>;
-				};
-
-				emmcpll: emmcpll {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-pll-clock";
-					clocks = <&osc>;
-					reg = <0x10C>;
-				};
-
-				eclk: eclk {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-emmc-clock";
-					clocks = <&emmcpll>;
-					reg = <0x114>;
-				};
-
-				pclk: pclk {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <150000000>;
-				};
-			};
-		};
-
-		dma@fff3d000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0xfff3d000 0x1000>;
-			interrupts = <0 92 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		ethernet@fff50000 {
-			compatible = "calxeda,hb-xgmac";
-			reg = <0xfff50000 0x1000>;
-			interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
-			dma-coherent;
-		};
-
-		ethernet@fff51000 {
-			compatible = "calxeda,hb-xgmac";
-			reg = <0xfff51000 0x1000>;
-			interrupts = <0 80 4>, <0 81 4>, <0 82 4>;
-			dma-coherent;
-		};
-
-		combophy0: combo-phy@fff58000 {
-			compatible = "calxeda,hb-combophy";
-			#phy-cells = <1>;
-			reg = <0xfff58000 0x1000>;
-			phydev = <5>;
-		};
-
-		combophy5: combo-phy@fff5d000 {
-			compatible = "calxeda,hb-combophy";
-			#phy-cells = <1>;
-			reg = <0xfff5d000 0x1000>;
-			phydev = <31>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
deleted file mode 100644
index 9698801cbcfb6..0000000000000
--- a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common devices used in different OMAP boards
- */
-
-/ {
-	elpida_ECB240ABACN: lpddr2 {
-		compatible	= "elpida,ECB240ABACN","jedec,lpddr2-s4";
-		density		= <2048>;
-		io-width	= <32>;
-
-		tRPab-min-tck	= <3>;
-		tRCD-min-tck	= <3>;
-		tWR-min-tck	= <3>;
-		tRASmin-min-tck	= <3>;
-		tRRD-min-tck	= <2>;
-		tWTR-min-tck	= <2>;
-		tXP-min-tck	= <2>;
-		tRTP-min-tck	= <2>;
-		tCKE-min-tck	= <3>;
-		tCKESR-min-tck	= <3>;
-		tFAW-min-tck	= <8>;
-
-		timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
-			compatible	= "jedec,lpddr2-timings";
-			min-freq	= <10000000>;
-			max-freq	= <400000000>;
-			tRPab		= <21000>;
-			tRCD		= <18000>;
-			tWR		= <15000>;
-			tRAS-min	= <42000>;
-			tRRD		= <10000>;
-			tWTR		= <7500>;
-			tXP		= <7500>;
-			tRTP		= <7500>;
-			tCKESR		= <15000>;
-			tDQSCK-max	= <5500>;
-			tFAW		= <50000>;
-			tZQCS		= <90000>;
-			tZQCL		= <360000>;
-			tZQinit		= <1000000>;
-			tRAS-max-ns	= <70000>;
-			tDQSCK-max-derated = <6000>;
-		};
-
-		timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
-			compatible	= "jedec,lpddr2-timings";
-			min-freq	= <10000000>;
-			max-freq	= <200000000>;
-			tRPab		= <21000>;
-			tRCD		= <18000>;
-			tWR		= <15000>;
-			tRAS-min	= <42000>;
-			tRRD		= <10000>;
-			tWTR		= <10000>;
-			tXP		= <7500>;
-			tRTP		= <7500>;
-			tCKESR		= <15000>;
-			tDQSCK-max	= <5500>;
-			tFAW		= <50000>;
-			tZQCS		= <90000>;
-			tZQCL		= <360000>;
-			tZQinit		= <1000000>;
-			tRAS-max-ns	= <70000>;
-			tDQSCK-max-derated = <6000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
deleted file mode 100644
index 89495dd373585..0000000000000
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the KZM9D board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- */
-/dts-v1/;
-
-#include "emev2.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "EMEV2 KZM9D Board";
-	compatible = "renesas,kzm9d", "renesas,emev2";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x8000000>;
-	};
-
-	aliases {
-		serial1 = &uart1;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial1:115200n8";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		one {
-			debounce-interval = <50>;
-			wakeup-source;
-			label = "DSW2-1";
-			linux,code = <KEY_1>;
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		};
-		two {
-			debounce-interval = <50>;
-			wakeup-source;
-			label = "DSW2-2";
-			linux,code = <KEY_2>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-		three {
-			debounce-interval = <50>;
-			wakeup-source;
-			label = "DSW2-3";
-			linux,code = <KEY_3>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		};
-		four {
-			debounce-interval = <50>;
-			wakeup-source;
-			label = "DSW2-4";
-			linux,code = <KEY_4>;
-			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	ethernet@20000000 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		reg = <0x20000000 0x10000>;
-		phy-mode = "mii";
-		interrupt-parent = <&gpio0>;
-		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
-		reg-io-width = <4>;
-		smsc,irq-active-high;
-		smsc,irq-push-pull;
-		vddvario-supply = <&reg_1p8v>;
-		vdd33a-supply = <&reg_3p3v>;
-	};
-};
-
-&iic0 {
-	status = "okay";
-};
-
-&iic1 {
-	status = "okay";
-};
-
-&pfc {
-	uart1_pins: uart1 {
-		groups = "uart1_ctrl", "uart1_data";
-		function = "uart1";
-	};
-};
-
-&uart1 {
-	pinctrl-0 = <&uart1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
deleted file mode 100644
index ecfaa0b7523e8..0000000000000
--- a/arch/arm/boot/dts/emev2.dtsi
+++ /dev/null
@@ -1,289 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Emma Mobile EV2 SoC
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,emev2";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
-		gpio4 = &gpio4;
-		i2c0 = &iic0;
-		i2c1 = &iic1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			clock-frequency = <533000000>;
-		};
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			clock-frequency = <533000000>;
-		};
-	};
-
-	gic: interrupt-controller@e0020000 {
-		compatible = "arm,pl390";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0xe0028000 0x1000>,
-		      <0xe0020000 0x0100>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	clocks@e0110000 {
-		compatible = "renesas,emev2-smu";
-		reg = <0xe0110000 0x10000>;
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		c32ki: c32ki {
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			#clock-cells = <0>;
-		};
-		iic0_sclkdiv: iic0_sclkdiv@624,0 {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x624 0>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		iic0_sclk: iic0_sclk@48c,1 {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x48c 1>;
-			clocks = <&iic0_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		iic1_sclkdiv: iic1_sclkdiv@624,16 {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x624 16>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		iic1_sclk: iic1_sclk@490,1 {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x490 1>;
-			clocks = <&iic1_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		pll3_fo: pll3_fo {
-			compatible = "fixed-factor-clock";
-			clocks = <&c32ki>;
-			clock-div = <1>;
-			clock-mult = <7000>;
-			#clock-cells = <0>;
-		};
-		usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x610 0>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		usib_u1_sclkdiv: usib_u1_sclkdiv@65c,0 {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x65c 0>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		usib_u2_sclkdiv: usib_u2_sclkdiv@65c,16 {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x65c 16>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		usib_u3_sclkdiv: usib_u3_sclkdiv@660,0 {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x660 0>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		usia_u0_sclk: usia_u0_sclk@4a0,1 {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x4a0 1>;
-			clocks = <&usia_u0_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		usib_u1_sclk: usib_u1_sclk@4b8,1 {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x4b8 1>;
-			clocks = <&usib_u1_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		usib_u2_sclk: usib_u2_sclk@4bc,1 {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x4bc 1>;
-			clocks = <&usib_u2_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		usib_u3_sclk: usib_u3_sclk@4c0,1 {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x4c0 1>;
-			clocks = <&usib_u3_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		sti_sclk: sti_sclk@528,1 {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x528 1>;
-			clocks = <&c32ki>;
-			#clock-cells = <0>;
-		};
-	};
-
-	timer@e0180000 {
-		compatible = "renesas,em-sti";
-		reg = <0xe0180000 0x54>;
-		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sti_sclk>;
-		clock-names = "sclk";
-	};
-
-	uart0: serial@e1020000 {
-		compatible = "renesas,em-uart";
-		reg = <0xe1020000 0x38>;
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usia_u0_sclk>;
-		clock-names = "sclk";
-	};
-
-	uart1: serial@e1030000 {
-		compatible = "renesas,em-uart";
-		reg = <0xe1030000 0x38>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usib_u1_sclk>;
-		clock-names = "sclk";
-	};
-
-	uart2: serial@e1040000 {
-		compatible = "renesas,em-uart";
-		reg = <0xe1040000 0x38>;
-		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usib_u2_sclk>;
-		clock-names = "sclk";
-	};
-
-	uart3: serial@e1050000 {
-		compatible = "renesas,em-uart";
-		reg = <0xe1050000 0x38>;
-		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usib_u3_sclk>;
-		clock-names = "sclk";
-	};
-
-	pfc: pinctrl@e0140200 {
-		compatible = "renesas,pfc-emev2";
-		reg = <0xe0140200 0x100>;
-	};
-
-	gpio0: gpio@e0050000 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 0 32>;
-		#gpio-cells = <2>;
-		ngpios = <32>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio1: gpio@e0050080 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
-		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
-		#gpio-cells = <2>;
-		ngpios = <32>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio2: gpio@e0050100 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
-		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
-		#gpio-cells = <2>;
-		ngpios = <32>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio3: gpio@e0050180 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 96 32>;
-		#gpio-cells = <2>;
-		ngpios = <32>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio4: gpio@e0050200 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
-		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 128 31>;
-		#gpio-cells = <2>;
-		ngpios = <31>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	iic0: i2c@e0070000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-emev2";
-		reg = <0xe0070000 0x28>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&iic0_sclk>;
-		clock-names = "sclk";
-		status = "disabled";
-	};
-
-	iic1: i2c@e10a0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-emev2";
-		reg = <0xe10a0000 0x28>;
-		interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&iic1_sclk>;
-		clock-names = "sclk";
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
deleted file mode 100644
index f23a25cce1195..0000000000000
--- a/arch/arm/boot/dts/en7523-evb.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/dts-v1/;
-
-/* Bootloader installs ATF here */
-/memreserve/ 0x80000000 0x200000;
-
-#include "en7523.dtsi"
-
-/ {
-	model = "Airoha EN7523 Evaluation Board";
-	compatible = "airoha,en7523-evb", "airoha,en7523";
-
-	aliases {
-		serial0 = &uart1;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-		stdout-path = "serial0:115200n8";
-		linux,usable-memory-range = <0x80200000 0x1fe00000>;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
deleted file mode 100644
index 7f839331a7779..0000000000000
--- a/arch/arm/boot/dts/en7523.dtsi
+++ /dev/null
@@ -1,204 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/en7523-clk.h>
-
-/ {
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		npu_binary@84000000 {
-			no-map;
-			reg = <0x84000000 0xA00000>;
-		};
-
-		npu_flag@84B0000 {
-			no-map;
-			reg = <0x84B00000 0x100000>;
-		};
-
-		npu_pkt@85000000 {
-			no-map;
-			reg = <0x85000000 0x1A00000>;
-		};
-
-		npu_phyaddr@86B00000 {
-			no-map;
-			reg = <0x86B00000 0x100000>;
-		};
-
-		npu_rxdesc@86D00000 {
-			no-map;
-			reg = <0x86D00000 0x100000>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-			};
-		};
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0>;
-			enable-method = "psci";
-			clock-frequency = <80000000>;
-			next-level-cache = <&L2_0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x1>;
-			enable-method = "psci";
-			clock-frequency = <80000000>;
-			next-level-cache = <&L2_0>;
-		};
-
-		L2_0: l2-cache0 {
-			compatible = "cache";
-		};
-	};
-
-	scu: system-controller@1fa20000 {
-		compatible = "airoha,en7523-scu";
-		reg = <0x1fa20000 0x400>,
-		      <0x1fb00000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	gic: interrupt-controller@9000000 {
-		compatible = "arm,gic-v3";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x09000000 0x20000>,
-		      <0x09080000 0x80000>,
-		      <0x09400000 0x2000>,
-		      <0x09500000 0x2000>,
-		      <0x09600000 0x20000>;
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	uart1: serial@1fbf0000 {
-		compatible = "ns16550";
-		reg = <0x1fbf0000 0x30>;
-		reg-io-width = <4>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <1843200>;
-		status = "okay";
-	};
-
-	gpio0: gpio@1fbf0200 {
-		compatible = "airoha,en7523-gpio";
-		reg = <0x1fbf0204 0x4>,
-		      <0x1fbf0200 0x4>,
-		      <0x1fbf0220 0x4>,
-		      <0x1fbf0214 0x4>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpio1: gpio@1fbf0270 {
-		compatible = "airoha,en7523-gpio";
-		reg = <0x1fbf0270 0x4>,
-		      <0x1fbf0260 0x4>,
-		      <0x1fbf0264 0x4>,
-		      <0x1fbf0278 0x4>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	pcie0: pcie@1fa91000 {
-		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
-		device_type = "pci";
-		reg = <0x1fa91000 0x1000>;
-		reg-names = "port0";
-		linux,pci-domain = <0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "pcie_irq";
-		clocks = <&scu EN7523_CLK_PCIE>;
-		clock-names = "sys_ck0";
-		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
-		status = "disabled";
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-				<0 0 0 2 &pcie_intc0 1>,
-				<0 0 0 3 &pcie_intc0 2>,
-				<0 0 0 4 &pcie_intc0 3>;
-		pcie_intc0: interrupt-controller {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-	};
-
-	pcie1: pcie@1fa92000 {
-		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
-		device_type = "pci";
-		reg = <0x1fa92000 0x1000>;
-		reg-names = "port1";
-		linux,pci-domain = <1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "pcie_irq";
-		clocks = <&scu EN7523_CLK_PCIE>;
-		clock-names = "sys_ck1";
-		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
-		status = "disabled";
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-				<0 0 0 2 &pcie_intc1 1>,
-				<0 0 0 3 &pcie_intc1 2>,
-				<0 0 0 4 &pcie_intc1 3>;
-		pcie_intc1: interrupt-controller {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/ep7209.dtsi
deleted file mode 100644
index 57bdad2c19947..0000000000000
--- a/arch/arm/boot/dts/ep7209.dtsi
+++ /dev/null
@@ -1,201 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-/dts-v1/;
-
-#include <dt-bindings/clock/clps711x-clock.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Cirrus Logic EP7209";
-	compatible = "cirrus,ep7209";
-
-	chosen { };
-
-	aliases {
-		gpio0 = &porta;
-		gpio1 = &portb;
-		gpio3 = &portd;
-		gpio4 = &porte;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		spi0 = &spi;
-		timer0 = &timer1;
-		timer1 = &timer2;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm720t";
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		clks: clks@80000000 {
-			#clock-cells = <1>;
-			compatible = "cirrus,ep7209-clk";
-			reg = <0x80000000 0xc000>;
-			startup-frequency = <73728000>;
-		};
-
-		intc: intc@80000000 {
-			compatible = "cirrus,ep7209-intc";
-			reg = <0x80000000 0x4000>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		porta: gpio@80000000 {
-			compatible = "cirrus,ep7209-gpio";
-			reg = <0x80000000 0x1 0x80000040 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		portb: gpio@80000001 {
-			compatible = "cirrus,ep7209-gpio";
-			reg = <0x80000001 0x1 0x80000041 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		portd: gpio@80000003 {
-			compatible = "cirrus,ep7209-gpio";
-			reg = <0x80000003 0x1 0x80000043 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		porte: gpio@80000083 {
-			compatible = "cirrus,ep7209-gpio";
-			reg = <0x80000083 0x1 0x800000c3 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		syscon1: syscon@80000100 {
-			compatible = "cirrus,ep7209-syscon1", "syscon";
-			reg = <0x80000100 0x80>;
-		};
-
-		bus: bus@80000180 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			compatible = "cirrus,ep7209-bus", "simple-bus";
-			clocks = <&clks CLPS711X_CLK_BUS>;
-			reg = <0x80000180 0x80>;
-			ranges = <
-				0 0 0x00000000 0x10000000
-				1 0 0x10000000 0x10000000
-				2 0 0x20000000 0x10000000
-				3 0 0x30000000 0x10000000
-				4 0 0x40000000 0x10000000
-				5 0 0x50000000 0x10000000
-				6 0 0x60000000 0x0000c000
-				7 0 0x70000000 0x00000080
-			>;
-		};
-
-		fb: fb@800002c0 {
-			compatible = "cirrus,ep7209-fb";
-			reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
-			clocks = <&clks CLPS711X_CLK_BUS>;
-			syscon = <&syscon1>;
-			status = "disabled";
-		};
-
-		timer1: timer@80000300 {
-			compatible = "cirrus,ep7209-timer";
-			reg = <0x80000300 0x4>;
-			clocks = <&clks CLPS711X_CLK_TIMER1>;
-			interrupts = <8>;
-		};
-
-		timer2: timer@80000340 {
-			compatible = "cirrus,ep7209-timer";
-			reg = <0x80000340 0x4>;
-			clocks = <&clks CLPS711X_CLK_TIMER2>;
-			interrupts = <9>;
-		};
-
-		pwm: pwm@80000400 {
-			compatible = "cirrus,ep7209-pwm";
-			reg = <0x80000400 0x4>;
-			clocks = <&clks CLPS711X_CLK_PWM>;
-			#pwm-cells = <1>;
-		};
-
-		uart1: serial@80000480 {
-			compatible = "cirrus,ep7209-uart";
-			reg = <0x80000480 0x80>;
-			interrupts = <12 13>;
-			clocks = <&clks CLPS711X_CLK_UART>;
-			syscon = <&syscon1>;
-		};
-
-		spi: spi@80000500 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "cirrus,ep7209-spi";
-			reg = <0x80000500 0x4>;
-			interrupts = <15>;
-			clocks = <&clks CLPS711X_CLK_SPI>;
-			syscon = <&syscon3>;
-			status = "disabled";
-		};
-
-		syscon2: syscon@80001100 {
-			compatible = "cirrus,ep7209-syscon2", "syscon";
-			reg = <0x80001100 0x80>;
-		};
-
-		uart2: serial@80001480 {
-			compatible = "cirrus,ep7209-uart";
-			reg = <0x80001480 0x80>;
-			interrupts = <28 29>;
-			clocks = <&clks CLPS711X_CLK_UART>;
-			syscon = <&syscon2>;
-		};
-
-		dai: dai@80002000 {
-			#sound-dai-cells = <0>;
-			compatible = "cirrus,ep7209-dai";
-			reg = <0x80002000 0x604>;
-			clocks = <&clks CLPS711X_CLK_PLL>;
-			clock-names = "pll";
-			interrupts = <32>;
-			syscon = <&syscon3>;
-			status = "disabled";
-		};
-
-		syscon3: syscon@80002200 {
-			compatible = "cirrus,ep7209-syscon3", "syscon";
-			reg = <0x80002200 0x40>;
-		};
-	};
-
-	keypad: keypad {
-		compatible = "cirrus,ep7209-keypad";
-		interrupt-parent = <&intc>;
-		interrupts = <16>;
-		syscon = <&syscon1>;
-		status = "disabled";
-	};
-
-	mctrl: mctrl {
-		compatible = "cirrus,ep7209-mctrl-gpio";
-		gpio,syscon-dev = <&syscon1 0 0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts
deleted file mode 100644
index 7fb532f227afb..0000000000000
--- a/arch/arm/boot/dts/ep7211-edb7211.dts
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "ep7211.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Cirrus Logic EP7211 Development Board";
-	compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
-
-	memory@c0000000 {
-		device_type = "memory";
-		reg = <0xc0000000 0x02000000>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0>;
-		brightness-levels = <
-			0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
-			0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf
-		>;
-		default-brightness-level = <0x0>;
-		power-supply = <&blen>;
-	};
-
-	display: display {
-		model = "320x240x4";
-		bits-per-pixel = <4>;
-		ac-prescale = <17>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: 320x240 {
-				hactive = <320>;
-				hback-porch = <0>;
-				hfront-porch = <0>;
-				hsync-len = <0>;
-				vactive = <240>;
-				vback-porch = <0>;
-				vfront-porch = <0>;
-				vsync-len = <0>;
-				clock-frequency = <6500000>;
-			};
-		};
-	};
-
-	i2c: i2c {
-		compatible = "i2c-gpio";
-		gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
-			<&portd 5 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <2>;
-		i2c-gpio,scl-output-only;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	lcddc: lcddc {
-		compatible = "regulator-fixed";
-		regulator-name = "BACKLIGHT ENABLE";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&portd 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	blen: blen {
-		compatible = "regulator-fixed";
-		regulator-name = "BACKLIGHT ENABLE";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&portd 3 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&bus {
-	flash: nor@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x00000000 0x02000000>;
-		bank-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&fb {
-	display = <&display>;
-	lcd-supply = <&lcddc>;
-	status = "okay";
-};
-
-&portd {
-	lcden {
-		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LCD ENABLE";
-	};
-};
diff --git a/arch/arm/boot/dts/ep7211.dtsi b/arch/arm/boot/dts/ep7211.dtsi
deleted file mode 100644
index 32a4e12371457..0000000000000
--- a/arch/arm/boot/dts/ep7211.dtsi
+++ /dev/null
@@ -1,8 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "ep7209.dtsi"
-
-/ {
-	model = "Cirrus Logic EP7211";
-	compatible = "cirrus,ep7211", "cirrus,ep7209";
-};
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
deleted file mode 100644
index ad7a0850252a1..0000000000000
--- a/arch/arm/boot/dts/ethernut5.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * ethernut5.dts - Device Tree file for Ethernut 5 board
- *
- * Copyright (C) 2012 egnite GmbH <info@egnite.de>
- */
-/dts-v1/;
-#include "at91sam9xe.dtsi"
-
-/ {
-	model = "Ethernut 5";
-	compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x08000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			usart0: serial@fffb0000 {
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs>;
-				pinctrl-names = "default";
-
-				nand: nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						root@0 {
-							label = "root";
-							reg = <0x0 0x08000000>;
-						};
-
-						data@20000 {
-							label = "data";
-							reg = <0x08000000 0x38000000>;
-						};
-					};
-				};
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-
-		pcf8563@50 {
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
deleted file mode 100644
index 6d519d02d190e..0000000000000
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3
- *
- * Copyright (C) 2012 Telit,
- *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
- */
-
-/dts-v1/;
-
-#include "ge863-pro3.dtsi"
-
-/ {
-	model = "Telit EVK-PRO3 for Telit GE863-PRO3";
-	compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9";
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-	};
-
-	ahb {
-		apb {
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usart0: serial@fffb0000 {
-				status = "okay";
-			};
-
-			usart2: serial@fffb8000 {
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-	};
-
-};
diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
deleted file mode 100644
index 597ade3e252f0..0000000000000
--- a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition.
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd
- */
-
-/ {
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mfc_left: region-mfc-left {
-			compatible = "shared-dma-pool";
-			no-map;
-			size = <0x2400000>;
-			alignment = <0x100000>;
-		};
-
-		mfc_right: region-mfc-right {
-			compatible = "shared-dma-pool";
-			no-map;
-			size = <0x800000>;
-			alignment = <0x100000>;
-		};
-	};
-};
-
-&mfc {
-	memory-region = <&mfc_left>, <&mfc_right>;
-};
diff --git a/arch/arm/boot/dts/exynos-pinctrl.h b/arch/arm/boot/dts/exynos-pinctrl.h
deleted file mode 100644
index e3a6df95281c4..0000000000000
--- a/arch/arm/boot/dts/exynos-pinctrl.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Samsung Exynos DTS pinctrl constants
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2022 Linaro Ltd
- * Author: Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#ifndef __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__
-#define __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__
-
-#define EXYNOS_PIN_PULL_NONE		0
-#define EXYNOS_PIN_PULL_DOWN		1
-#define EXYNOS_PIN_PULL_UP		3
-
-/* Pin function in power down mode */
-#define EXYNOS_PIN_PDN_OUT0		0
-#define EXYNOS_PIN_PDN_OUT1		1
-#define EXYNOS_PIN_PDN_INPUT		2
-#define EXYNOS_PIN_PDN_PREV		3
-
-/* Drive strengths for Exynos3250, Exynos4 (all) and Exynos5250 */
-#define EXYNOS4_PIN_DRV_LV1		0
-#define EXYNOS4_PIN_DRV_LV2		2
-#define EXYNOS4_PIN_DRV_LV3		1
-#define EXYNOS4_PIN_DRV_LV4		3
-
-/* Drive strengths for Exynos5260 */
-#define EXYNOS5260_PIN_DRV_LV1		0
-#define EXYNOS5260_PIN_DRV_LV2		1
-#define EXYNOS5260_PIN_DRV_LV4		2
-#define EXYNOS5260_PIN_DRV_LV6		3
-
-/*
- * Drive strengths for Exynos5410, Exynos542x, Exynos5800 and Exynos850 (except
- * GPIO_HSI block)
- */
-#define EXYNOS5420_PIN_DRV_LV1		0
-#define EXYNOS5420_PIN_DRV_LV2		1
-#define EXYNOS5420_PIN_DRV_LV3		2
-#define EXYNOS5420_PIN_DRV_LV4		3
-
-#define EXYNOS_PIN_FUNC_INPUT		0
-#define EXYNOS_PIN_FUNC_OUTPUT		1
-#define EXYNOS_PIN_FUNC_2		2
-#define EXYNOS_PIN_FUNC_3		3
-#define EXYNOS_PIN_FUNC_4		4
-#define EXYNOS_PIN_FUNC_5		5
-#define EXYNOS_PIN_FUNC_6		6
-#define EXYNOS_PIN_FUNC_EINT		0xf
-#define EXYNOS_PIN_FUNC_F		EXYNOS_PIN_FUNC_EINT
-
-#endif /* __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
deleted file mode 100644
index bc9a78f6d4b72..0000000000000
--- a/arch/arm/boot/dts/exynos-syscon-restart.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
- */
-
-&pmu_system_controller {
-	poweroff: syscon-poweroff {
-		compatible = "syscon-poweroff";
-		regmap = <&pmu_system_controller>;
-		offset = <0x330c>; /* PS_HOLD_CONTROL */
-		mask = <0x5200>; /* reset value */
-	};
-
-	reboot: syscon-reboot {
-		compatible = "syscon-reboot";
-		regmap = <&pmu_system_controller>;
-		offset = <0x0400>; /* SWRESET */
-		mask = <0x1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
deleted file mode 100644
index 660cc7fac4db3..0000000000000
--- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's ARTIK5 evaluation board
- * which is based on Samsung Exynos3250 SoC.
- */
-
-/dts-v1/;
-#include "exynos3250-artik5.dtsi"
-
-/ {
-	model = "Samsung ARTIK5 evaluation board";
-	compatible = "samsung,artik5-eval", "samsung,artik5",
-			"samsung,exynos3250", "samsung,exynos3";
-
-	aliases {
-		mmc0 = &mshc_2;
-	};
-};
-
-&mshc_2 {
-	cap-sd-highspeed;
-	disable-wp;
-	vqmmc-supply = <&ldo3_reg>;
-	card-detect-delay = <200>;
-	clock-frequency = <100000000>;
-	max-frequency = <100000000>;
-	samsung,dw-mshc-ciu-div = <1>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&spi_0 {
-	status = "okay";
-	cs-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>, <0>;
-
-	assigned-clocks = <&cmu CLK_MOUT_SPI0>, <&cmu CLK_DIV_SPI0>,
-			  <&cmu CLK_DIV_SPI0_PRE>, <&cmu CLK_SCLK_SPI0>;
-	assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>, /* for: CLK_MOUT_SPI0 */
-				 <&cmu CLK_MOUT_SPI0>,    /* for: CLK_DIV_SPI0 */
-				 <&cmu CLK_DIV_SPI0>,     /* for: CLK_DIV_SPI0_PRE */
-				 <&cmu CLK_DIV_SPI0_PRE>; /* for: CLK_SCLK_SPI0 */
-
-	ethernet@0 {
-		compatible = "asix,ax88796c";
-		reg = <0x0>;
-		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a boot-loader */
-		interrupt-parent = <&gpx2>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		spi-max-frequency = <40000000>;
-		reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>;
-
-		controller-data {
-			samsung,spi-feedback-delay = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
deleted file mode 100644
index 3fdd922e635ce..0000000000000
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ /dev/null
@@ -1,432 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos3250 based ARTIK5 module device tree source
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's ARTIK5 module which is based on
- * Samsung Exynos3250 SoC.
- */
-
-#include "exynos3250.dtsi"
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
-
-	aliases {
-		mmc0 = &mshc_0;
-		mmc1 = &mshc_1;
-	};
-
-	chosen {
-		stdout-path = &serial_2;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x1f800000>;
-	};
-
-	firmware@205f000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0205f000 0x1000>;
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-					/* Corresponds to 500MHz */
-					cooling-device = <&cpu0 5 5>,
-							 <&cpu1 5 5>;
-				};
-				map1 {
-					/* Corresponds to 200MHz */
-					cooling-device = <&cpu0 8 8>,
-							 <&cpu1 8 8>;
-				};
-			};
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo7_reg>;
-	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
-	assigned-clock-rates = <6000000>;
-};
-
-&cmu {
-	clocks = <&xusbxti>;
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&gpu {
-	mali-supply = <&buck3_reg>;
-	status = "okay";
-};
-
-&i2c_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	status = "okay";
-
-	pmic@66 {
-		compatible = "samsung,s2mps14-pmic";
-		interrupt-parent = <&gpx3>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&s2mps14_irq>;
-		reg = <0x66>;
-
-		s2mps14_osc: clocks {
-			compatible = "samsung,s2mps14-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s2mps14_ap", "unused",
-				"s2mps14_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				/* VDD_ALIVE15x */
-				regulator-name = "VLDO1_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				/* VDDQM176 ~ VDDQM185 */
-				regulator-name = "VLDO2_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				/*
-				 * VDD1_E106 ~ VDD1_E111
-				 * DVDD_RTC_AP, DVDD_MMC2_AP
-				 */
-				regulator-name = "VLDO3_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				/*  AVDD_PLL1120 ~ AVDD_PLL11201 */
-				regulator-name = "VLDO4_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: LDO5 {
-				/* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */
-				regulator-name = "VLDO5_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				/* VDD_USB, VDD10_HSIC */
-				regulator-name = "VLDO6_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				/*
-				 * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2,
-				 * AVDD_ADC, AVDD_ABB_0, M4S_VDD18
-				 */
-				regulator-name = "VLDO7_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				/* AVDD33_UOTG */
-				regulator-name = "VLDO8_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: LDO9 {
-				/* VDDQ_E86 ~ VDDQ_E105*/
-				regulator-name = "VLDO9_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VLDO10_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo11_reg: LDO11 {
-				/* VDD74 ~ VDD75 */
-				regulator-name = "VLDO11_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo12_reg: LDO12 {
-				/* VDD72 ~ VDD73 */
-				regulator-name = "VLDO12_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VLDO13_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VLDO14_2.7V";
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2700000>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VLDO_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VLDO16_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "VLDO17_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo18_reg: LDO18 {
-				/* DVDD_MMC2_AP */
-				regulator-name = "VLDO18_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "VLDO19_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "VLDO20_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "VLDO21_1.25V";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "VLDO22_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo23_reg: LDO23 {
-				/* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */
-				regulator-name = "VLDO23_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "VLDO24_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "VLDO25_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			buck1_reg: BUCK1 {
-				/* VDD_MIF */
-				regulator-name = "VBUCK1_1.0V";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			buck2_reg: BUCK2 {
-				/* VDD_CPU */
-				regulator-name = "VBUCK2_1.2V";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			buck3_reg: BUCK3 {
-				/* VDD_G3D */
-				regulator-name = "VBUCK3_1.0V";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VBUCK4_1.95V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VBUCK5_1.35V";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&mshc_0 {
-	non-removable;
-	cap-mmc-highspeed;
-	card-detect-delay = <200>;
-	vmmc-supply = <&ldo12_reg>;
-	clock-frequency = <100000000>;
-	max-frequency = <100000000>;
-	mmc-ddr-1_8v;
-	samsung,dw-mshc-ciu-div = <1>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&mshc_1 {
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	disable-wp;
-	non-removable;
-	keep-power-in-suspend;
-	fifo-depth = <0x40>;
-	vqmmc-supply = <&ldo11_reg>;
-	/*
-	 * Voltage negotiation is broken for the SDIO periph so we
-	 * can't actually set the voltage here.
-	 * vmmc-supply = <&ldo23_reg>;
-	 */
-	card-detect-delay = <500>;
-	clock-frequency = <100000000>;
-	max-frequency = <100000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&pinctrl_1 {
-	bten: bten-pins {
-		samsung,pins = "gpx1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
-		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
-	};
-
-	wlanen: wlanen-pins {
-		samsung,pins = "gpx2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
-		samsung,pin-val = <1>;
-	};
-
-	s2mps14_irq: s2mps14-irq-pins {
-		samsung,pins = "gpx3-5";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	bthostwake: bthostwake-pins {
-		samsung,pins = "gpx3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
-		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	btwake: btwake-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
-		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
-	};
-};
-
-&rtc {
-	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-	status = "okay";
-};
-
-&serial_0 {
-	assigned-clocks = <&cmu CLK_SCLK_UART0>;
-	assigned-clock-rates = <100000000>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4330-bt";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bten &btwake &bthostwake>;
-		max-speed = <3000000>;
-		shutdown-gpios = <&gpx1 7 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpx3 6 GPIO_ACTIVE_HIGH>;
-		clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
-	};
-};
-
-&tmu {
-	status = "okay";
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
deleted file mode 100644
index 2de877d4ccc5c..0000000000000
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ /dev/null
@@ -1,644 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos3250 based Monk board device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Monk board which is based on
- * Samsung Exynos3250 SoC.
- */
-
-/dts-v1/;
-#include "exynos3250.dtsi"
-#include "exynos4412-ppmu-common.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/samsung,s2mps11.h>
-
-/ {
-	model = "Samsung Monk board";
-	compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
-
-	aliases {
-		i2c7 = &i2c_max77836;
-		mmc0 = &mshc_0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x1ff00000>;
-	};
-
-	firmware@205f000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0205f000 0x1000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power-key {
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "power key";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	vemmc_reg: voltage-regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_EMMC_2.8V-fixed";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	i2c_max77836: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		max77836: pmic@25 {
-			compatible = "maxim,max77836";
-			interrupt-parent = <&gpx1>;
-			interrupts = <5 IRQ_TYPE_NONE>;
-			reg = <0x25>;
-			wakeup-source;
-
-			extcon {
-				compatible = "maxim,max77836-muic";
-			};
-
-			regulators {
-				compatible = "maxim,max77836-regulator";
-				safeout_reg: SAFEOUT {
-					regulator-name = "SAFEOUT";
-				};
-
-				charger_reg: CHARGER {
-					regulator-name = "CHARGER";
-					regulator-min-microamp = <45000>;
-					regulator-max-microamp = <475000>;
-					regulator-boot-on;
-				};
-
-				motor_reg: LDO1 {
-					regulator-name = "MOT_2.7V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <2700000>;
-				};
-
-				LDO2 {
-					regulator-name = "UNUSED_LDO2";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <3950000>;
-				};
-			};
-
-			charger {
-				compatible = "maxim,max77836-charger";
-
-				maxim,constant-uvolt = <4350000>;
-				maxim,fast-charge-uamp = <225000>;
-				maxim,eoc-uamp = <7500>;
-				maxim,ovp-uvolt = <6500000>;
-			};
-		};
-	};
-
-	haptics {
-		compatible = "regulator-haptic";
-		haptic-supply = <&motor_reg>;
-		min-microvolt = <1100000>;
-		max-microvolt = <2700000>;
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-					/* Correspond to 500MHz at freq_table */
-					cooling-device = <&cpu0 5 5>,
-							 <&cpu1 5 5>;
-				};
-				map1 {
-					/* Correspond to 200MHz at freq_table */
-					cooling-device = <&cpu0 8 8>,
-							 <&cpu1 8 8>;
-				};
-			};
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo3_reg>;
-	status = "okay";
-	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
-	assigned-clock-rates = <6000000>;
-
-	thermistor-ap {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;
-		pullup-ohm = <100000>;
-		pulldown-ohm = <100000>;
-		io-channels = <&adc 0>;
-	};
-
-	thermistor-battery {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;
-		pullup-ohm = <100000>;
-		pulldown-ohm = <100000>;
-		io-channels = <&adc 1>;
-	};
-};
-
-&bus_dmc {
-	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
-	vdd-supply = <&buck1_reg>;
-	status = "okay";
-};
-
-&cmu {
-	clocks = <&xusbxti>;
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&exynos_usbphy {
-	vbus-supply = <&safeout_reg>;
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&buck3_reg>;
-	status = "okay";
-};
-
-&hsotg {
-	vusb_d-supply = <&ldo15_reg>;
-	vusb_a-supply = <&ldo12_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	status = "okay";
-
-	pmic@66 {
-		compatible = "samsung,s2mps14-pmic";
-		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		reg = <0x66>;
-		wakeup-source;
-
-		s2mps14_osc: clocks {
-			compatible = "samsung,s2mps14-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s2mps14_ap", "unused",
-				"s2mps14_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VAP_ALIVE_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VAP_M1_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VCC_AP_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VAP_AVDD_PLL1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VAP_PLL_ISO_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VAP_MIPI_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VAP_AVDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VAP_USB_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "V_LPDDR_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "UNUSED_LDO10";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "V_EMMC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "V_EMMC_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VSENSOR_2.85V";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "UNUSED_LDO14";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "TSP_AVDD_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "LCD_VDD_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "UNUSED_LDO17";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "UNUSED_LDO18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "TSP_VDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "LCD_VDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "UNUSED_LDO21";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "UNUSED_LDO22";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "UNUSED_LDO23";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "UNUSED_LDO24";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "UNUSED_LDO25";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VAP_MIF_1.0V";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <900000>;
-				regulator-always-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VAP_ARM_1.0V";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VAP_INT3D_1.0V";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VCC_SUB_1.95V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VCC_SUB_1.35V";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	status = "okay";
-
-	fuelgauge@36 {
-		compatible = "maxim,max77836-battery";
-		interrupt-parent = <&gpx1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		reg = <0x36>;
-	};
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&mshc_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	broken-cd;
-	non-removable;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	card-detect-delay = <200>;
-	vmmc-supply = <&vemmc_reg>;
-	clock-frequency = <100000000>;
-	max-frequency = <100000000>;
-	mmc-ddr-1_8v;
-	samsung,dw-mshc-ciu-div = <1>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&serial_0 {
-	assigned-clocks = <&cmu CLK_SCLK_UART0>;
-	assigned-clock-rates = <100000000>;
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&tmu {
-	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
-};
-
-&rtc {
-	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-	status = "okay";
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep0>;
-
-	sleep0: sleep-state {
-		PIN_SLP(gpa0-0, INPUT, DOWN);
-		PIN_SLP(gpa0-1, INPUT, DOWN);
-		PIN_SLP(gpa0-2, INPUT, DOWN);
-		PIN_SLP(gpa0-3, INPUT, DOWN);
-		PIN_SLP(gpa0-4, INPUT, DOWN);
-		PIN_SLP(gpa0-5, INPUT, DOWN);
-		PIN_SLP(gpa0-6, INPUT, DOWN);
-		PIN_SLP(gpa0-7, INPUT, DOWN);
-
-		PIN_SLP(gpa1-0, INPUT, DOWN);
-		PIN_SLP(gpa1-1, INPUT, DOWN);
-		PIN_SLP(gpa1-2, INPUT, DOWN);
-		PIN_SLP(gpa1-3, INPUT, DOWN);
-		PIN_SLP(gpa1-4, INPUT, DOWN);
-		PIN_SLP(gpa1-5, INPUT, DOWN);
-
-		PIN_SLP(gpb-0, PREV, NONE);
-		PIN_SLP(gpb-1, PREV, NONE);
-		PIN_SLP(gpb-2, PREV, NONE);
-		PIN_SLP(gpb-3, PREV, NONE);
-		PIN_SLP(gpb-4, INPUT, DOWN);
-		PIN_SLP(gpb-5, INPUT, DOWN);
-		PIN_SLP(gpb-6, INPUT, DOWN);
-		PIN_SLP(gpb-7, INPUT, DOWN);
-
-		PIN_SLP(gpc0-0, INPUT, DOWN);
-		PIN_SLP(gpc0-1, INPUT, DOWN);
-		PIN_SLP(gpc0-2, INPUT, DOWN);
-		PIN_SLP(gpc0-3, INPUT, DOWN);
-		PIN_SLP(gpc0-4, INPUT, DOWN);
-
-		PIN_SLP(gpc1-0, INPUT, DOWN);
-		PIN_SLP(gpc1-1, INPUT, DOWN);
-		PIN_SLP(gpc1-2, INPUT, DOWN);
-		PIN_SLP(gpc1-3, INPUT, DOWN);
-		PIN_SLP(gpc1-4, INPUT, DOWN);
-
-		PIN_SLP(gpd0-0, INPUT, DOWN);
-		PIN_SLP(gpd0-1, INPUT, DOWN);
-		PIN_SLP(gpd0-2, INPUT, NONE);
-		PIN_SLP(gpd0-3, INPUT, NONE);
-
-		PIN_SLP(gpd1-0, INPUT, NONE);
-		PIN_SLP(gpd1-1, INPUT, NONE);
-		PIN_SLP(gpd1-2, INPUT, NONE);
-		PIN_SLP(gpd1-3, INPUT, NONE);
-	};
-};
-
-&pinctrl_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&initial1 &sleep1>;
-
-	initial1: initial-state {
-		PIN_IN(gpk2-0, DOWN, LV1);
-		PIN_IN(gpk2-1, DOWN, LV1);
-		PIN_IN(gpk2-2, DOWN, LV1);
-		PIN_IN(gpk2-3, DOWN, LV1);
-		PIN_IN(gpk2-4, DOWN, LV1);
-		PIN_IN(gpk2-5, DOWN, LV1);
-		PIN_IN(gpk2-6, DOWN, LV1);
-	};
-
-	sleep1: sleep-state {
-		PIN_SLP(gpe0-0, PREV, NONE);
-		PIN_SLP(gpe0-1, PREV, NONE);
-		PIN_SLP(gpe0-2, INPUT, DOWN);
-		PIN_SLP(gpe0-3, INPUT, DOWN);
-		PIN_SLP(gpe0-4, PREV, NONE);
-		PIN_SLP(gpe0-5, INPUT, DOWN);
-		PIN_SLP(gpe0-6, INPUT, DOWN);
-		PIN_SLP(gpe0-7, INPUT, DOWN);
-
-		PIN_SLP(gpe1-0, INPUT, DOWN);
-		PIN_SLP(gpe1-1, PREV, NONE);
-		PIN_SLP(gpe1-2, INPUT, DOWN);
-		PIN_SLP(gpe1-3, INPUT, DOWN);
-		PIN_SLP(gpe1-4, INPUT, DOWN);
-		PIN_SLP(gpe1-5, INPUT, DOWN);
-		PIN_SLP(gpe1-6, INPUT, DOWN);
-		PIN_SLP(gpe1-7, INPUT, NONE);
-
-		PIN_SLP(gpe2-0, INPUT, NONE);
-		PIN_SLP(gpe2-1, INPUT, NONE);
-		PIN_SLP(gpe2-2, INPUT, NONE);
-
-		PIN_SLP(gpk0-0, INPUT, DOWN);
-		PIN_SLP(gpk0-1, INPUT, DOWN);
-		PIN_SLP(gpk0-2, OUT0, NONE);
-		PIN_SLP(gpk0-3, INPUT, DOWN);
-		PIN_SLP(gpk0-4, INPUT, DOWN);
-		PIN_SLP(gpk0-5, INPUT, DOWN);
-		PIN_SLP(gpk0-6, INPUT, DOWN);
-		PIN_SLP(gpk0-7, INPUT, DOWN);
-
-		PIN_SLP(gpk1-0, PREV, NONE);
-		PIN_SLP(gpk1-1, PREV, NONE);
-		PIN_SLP(gpk1-2, INPUT, DOWN);
-		PIN_SLP(gpk1-3, PREV, NONE);
-		PIN_SLP(gpk1-4, PREV, NONE);
-		PIN_SLP(gpk1-5, PREV, NONE);
-		PIN_SLP(gpk1-6, PREV, NONE);
-
-		PIN_SLP(gpk2-0, INPUT, DOWN);
-		PIN_SLP(gpk2-1, INPUT, DOWN);
-		PIN_SLP(gpk2-2, INPUT, DOWN);
-		PIN_SLP(gpk2-3, INPUT, DOWN);
-		PIN_SLP(gpk2-4, INPUT, DOWN);
-		PIN_SLP(gpk2-5, INPUT, DOWN);
-		PIN_SLP(gpk2-6, INPUT, DOWN);
-
-		PIN_SLP(gpl0-0, INPUT, DOWN);
-		PIN_SLP(gpl0-1, INPUT, DOWN);
-		PIN_SLP(gpl0-2, INPUT, DOWN);
-		PIN_SLP(gpl0-3, INPUT, DOWN);
-
-		PIN_SLP(gpm0-0, INPUT, DOWN);
-		PIN_SLP(gpm0-1, INPUT, DOWN);
-		PIN_SLP(gpm0-2, INPUT, DOWN);
-		PIN_SLP(gpm0-3, INPUT, DOWN);
-		PIN_SLP(gpm0-4, INPUT, DOWN);
-		PIN_SLP(gpm0-5, INPUT, DOWN);
-		PIN_SLP(gpm0-6, INPUT, DOWN);
-		PIN_SLP(gpm0-7, INPUT, DOWN);
-
-		PIN_SLP(gpm1-0, INPUT, DOWN);
-		PIN_SLP(gpm1-1, INPUT, DOWN);
-		PIN_SLP(gpm1-2, INPUT, DOWN);
-		PIN_SLP(gpm1-3, INPUT, DOWN);
-		PIN_SLP(gpm1-4, INPUT, DOWN);
-		PIN_SLP(gpm1-5, INPUT, DOWN);
-		PIN_SLP(gpm1-6, INPUT, DOWN);
-
-		PIN_SLP(gpm2-0, INPUT, DOWN);
-		PIN_SLP(gpm2-1, INPUT, DOWN);
-		PIN_SLP(gpm2-2, INPUT, DOWN);
-		PIN_SLP(gpm2-3, INPUT, DOWN);
-		PIN_SLP(gpm2-4, INPUT, DOWN);
-
-		PIN_SLP(gpm3-0, INPUT, DOWN);
-		PIN_SLP(gpm3-1, INPUT, DOWN);
-		PIN_SLP(gpm3-2, INPUT, DOWN);
-		PIN_SLP(gpm3-3, INPUT, DOWN);
-		PIN_SLP(gpm3-4, INPUT, DOWN);
-		PIN_SLP(gpm3-5, INPUT, DOWN);
-		PIN_SLP(gpm3-6, INPUT, DOWN);
-		PIN_SLP(gpm3-7, INPUT, DOWN);
-
-		PIN_SLP(gpm4-0, INPUT, DOWN);
-		PIN_SLP(gpm4-1, INPUT, DOWN);
-		PIN_SLP(gpm4-2, INPUT, DOWN);
-		PIN_SLP(gpm4-3, INPUT, DOWN);
-		PIN_SLP(gpm4-4, INPUT, DOWN);
-		PIN_SLP(gpm4-5, INPUT, DOWN);
-		PIN_SLP(gpm4-6, INPUT, DOWN);
-		PIN_SLP(gpm4-7, INPUT, DOWN);
-	};
-};
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
deleted file mode 100644
index 011ba2eff29eb..0000000000000
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ /dev/null
@@ -1,543 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- */
-
-#include "exynos-pinctrl.h"
-
-#define PIN_IN(_pin, _pull, _drv)					\
-	pin- ## _pin {							\
-		samsung,pins = #_pin;					\
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;		\
-		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
-	}
-
-#define PIN_SLP(_pin, _mode, _pull)					\
-	pin- ## _pin {							\
-		samsung,pins = #_pin;					\
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
-	}
-
-&pinctrl_0 {
-	gpa0: gpa0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data-pins {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart0_fctl: uart0-fctl-pins {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_data: uart1-data-pins {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_fctl: uart1-fctl-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c2_bus: i2c2-bus-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_data: uart2-data-pins {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c3_bus: i2c3-bus-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi0_bus: spi0-bus-pins {
-		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c4_bus: i2c4-bus-pins {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi1_bus: spi1-bus-pins {
-		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c5_bus: i2c5-bus-pins {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s2_bus: i2s2-bus-pins {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm2_bus: pcm2-bus-pins {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c6_bus: i2c6-bus-pins {
-		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm0_out: pwm0-out-pins {
-		samsung,pins = "gpd0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm1_out: pwm1-out-pins {
-		samsung,pins = "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c7_bus: i2c7-bus-pins {
-		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm2_out: pwm2-out-pins {
-		samsung,pins = "gpd0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm3_out: pwm3-out-pins {
-		samsung,pins = "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c0_bus: i2c0-bus-pins {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	mipi0_clk: mipi0-clk-pins {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c1_bus: i2c1-bus-pins {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	gpe0: gpe0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpe1: gpe1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpe2: gpe2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpk0: gpk0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk1: gpk1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk2: gpk2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl0: gpl0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm0: gpm0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm1: gpm1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm2: gpm2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm3: gpm3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm4: gpm4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx0: gpx0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx1: gpx1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx2: gpx2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk-pins {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cmd: sd0-cmd-pins {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cd: sd0-cd-pins {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_rdqs: sd0-rdqs-pins {
-		samsung,pins = "gpk0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus1: sd0-bus-width1-pins {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus4: sd0-bus-width4-pins {
-		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus8: sd0-bus-width8-pins {
-		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_clk: sd1-clk-pins {
-		samsung,pins = "gpk1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cmd: sd1-cmd-pins {
-		samsung,pins = "gpk1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cd: sd1-cd-pins {
-		samsung,pins = "gpk1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus1: sd1-bus-width1-pins {
-		samsung,pins = "gpk1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus4: sd1-bus-width4-pins {
-		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_clk: sd2-clk-pins {
-		samsung,pins = "gpk2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cmd: sd2-cmd-pins {
-		samsung,pins = "gpk2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cd: sd2-cd-pins {
-		samsung,pins = "gpk2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus1: sd2-bus-width1-pins {
-		samsung,pins = "gpk2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus4: sd2-bus-width4-pins {
-		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_b_io: cam-port-b-io-pins {
-		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
-				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_b_clk_active: cam-port-b-clk-active-pins {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_i2c0: fimc-is-i2c0-pins {
-		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_i2c1: fimc-is-i2c1-pins {
-		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_uart: fimc-is-uart-pins {
-		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
deleted file mode 100644
index 88fb3e68ff029..0000000000000
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ /dev/null
@@ -1,921 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos3250 based Rinato board device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Rinato board which is based on
- * Samsung Exynos3250 SoC.
- */
-
-/dts-v1/;
-#include "exynos3250.dtsi"
-#include "exynos4412-ppmu-common.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/samsung,s2mps11.h>
-
-/ {
-	model = "Samsung Rinato board";
-	compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
-	chassis-type = "watch";
-
-	aliases {
-		i2c7 = &i2c_max77836;
-		mmc0 = &mshc_0;
-		mmc1 = &mshc_1;
-	};
-
-	chosen {
-		stdout-path = &serial_1;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x1ff00000>;
-	};
-
-	firmware@205f000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0205f000 0x1000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power-key {
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "power key";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	wlan_pwrseq: mshc1-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
-	};
-
-	i2c_max77836: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		max77836: pmic@25 {
-			compatible = "maxim,max77836";
-			interrupt-parent = <&gpx1>;
-			interrupts = <5 IRQ_TYPE_NONE>;
-			reg = <0x25>;
-			wakeup-source;
-
-			extcon {
-				compatible = "maxim,max77836-muic";
-			};
-
-			regulators {
-				compatible = "maxim,max77836-regulator";
-				safeout_reg: SAFEOUT {
-					regulator-name = "SAFEOUT";
-				};
-
-				charger_reg: CHARGER {
-					regulator-name = "CHARGER";
-					regulator-min-microamp = <45000>;
-					regulator-max-microamp = <475000>;
-					regulator-boot-on;
-				};
-
-				motor_reg: LDO1 {
-					regulator-name = "MOT_2.7V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <2700000>;
-				};
-
-				LDO2 {
-					regulator-name = "UNUSED_LDO2";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <3950000>;
-				};
-			};
-
-			charger {
-				compatible = "maxim,max77836-charger";
-
-				maxim,constant-uvolt = <4350000>;
-				maxim,fast-charge-uamp = <225000>;
-				maxim,eoc-uamp = <7500>;
-				maxim,ovp-uvolt = <6500000>;
-			};
-		};
-	};
-
-	haptics {
-		compatible = "regulator-haptic";
-		haptic-supply = <&motor_reg>;
-		min-microvolt = <1100000>;
-		max-microvolt = <2700000>;
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-					/* Corresponds to 500MHz */
-					cooling-device = <&cpu0 5 5>,
-							 <&cpu1 5 5>;
-				};
-				map1 {
-					/* Corresponds to 200MHz */
-					cooling-device = <&cpu0 8 8>,
-							 <&cpu1 8 8>;
-				};
-			};
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo3_reg>;
-	status = "okay";
-	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
-	assigned-clock-rates = <6000000>;
-
-	thermistor-ap {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;
-		pullup-ohm = <100000>;
-		pulldown-ohm = <100000>;
-		io-channels = <&adc 0>;
-	};
-
-	thermistor-battery {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;
-		pullup-ohm = <100000>;
-		pulldown-ohm = <100000>;
-		io-channels = <&adc 1>;
-	};
-};
-
-&bus_dmc {
-	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
-	vdd-supply = <&buck1_reg>;
-	status = "okay";
-};
-
-&bus_leftbus {
-	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
-	vdd-supply = <&buck3_reg>;
-	status = "okay";
-};
-
-&bus_rightbus {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_lcd0 {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_fsys {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_mcuisp {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_isp {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_peril {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_mfc {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&cmu {
-	clocks = <&xusbxti>;
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&exynos_usbphy {
-	status = "okay";
-	vbus-supply = <&safeout_reg>;
-};
-
-&hsotg {
-	vusb_d-supply = <&ldo15_reg>;
-	vusb_a-supply = <&ldo12_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&dsi_0 {
-	vddcore-supply = <&ldo6_reg>;
-	vddio-supply = <&ldo6_reg>;
-	samsung,burst-clock-frequency = <250000000>;
-	samsung,esc-clock-frequency = <20000000>;
-	samsung,pll-clock-frequency = <24000000>;
-	status = "okay";
-
-	panel@0 {
-		compatible = "samsung,s6e63j0x03";
-		reg = <0>;
-		vdd3-supply = <&ldo16_reg>;
-		vci-supply = <&ldo20_reg>;
-		reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
-		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&fimd {
-	status = "okay";
-
-	i80-if-timings {
-		cs-setup = <0>;
-		wr-setup = <0>;
-		wr-active = <1>;
-		wr-hold = <0>;
-	};
-};
-
-&gpu {
-	mali-supply = <&buck3_reg>;
-	status = "okay";
-};
-
-&i2c_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	status = "okay";
-
-	pmic@66 {
-		compatible = "samsung,s2mps14-pmic";
-		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		reg = <0x66>;
-		wakeup-source;
-
-		s2mps14_osc: clocks {
-			compatible = "samsung,s2mps14-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s2mps14_ap", "unused",
-				"s2mps14_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VAP_ALIVE_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VAP_M1_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VCC_AP_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VAP_AVDD_PLL1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VAP_PLL_ISO_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VAP_VMIPI_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VAP_AVDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VAP_USB_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "V_LPDDR_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "UNUSED_LDO10";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "V_EMMC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "V_EMMC_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "CAM_AVDD_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "UNUSED_LDO14";
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2700000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "TSP_AVDD_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "LCD_VDD_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "V_IRLED_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "CAM_AF_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "TSP_VDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "LCD_VDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "CAM_IO_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "CAM_DVDD_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "HRM_VCC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "HRM_VCC_3.3V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "UNUSED_LDO25";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VAP_MIF_1.0V";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <900000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VAP_ARM_1.0V";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VAP_INT3D_1.0V";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VCC_SUB_1.95V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VCC_SUB_1.35V";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	status = "okay";
-
-	fuelgauge@36 {
-		compatible = "maxim,max77836-battery";
-		interrupt-parent = <&gpx1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		reg = <0x36>;
-	};
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&jpeg {
-	status = "okay";
-};
-
-&mshc_0 {
-	broken-cd;
-	non-removable;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	card-detect-delay = <200>;
-	vmmc-supply = <&ldo12_reg>;
-	clock-frequency = <100000000>;
-	max-frequency = <100000000>;
-	mmc-ddr-1_8v;
-	samsung,dw-mshc-ciu-div = <1>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&mshc_1 {
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	non-removable;
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	keep-power-in-suspend;
-	samsung,dw-mshc-ciu-div = <1>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
-	bus-width = <4>;
-
-	mmc-pwrseq = <&wlan_pwrseq>;
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
-		reg = <1>;
-
-		interrupt-parent = <&gpx1>;
-		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-	};
-};
-
-&serial_0 {
-	assigned-clocks = <&cmu CLK_SCLK_UART0>;
-	assigned-clock-rates = <100000000>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4330-bt";
-		max-speed = <3000000>;
-		shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-		clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
-	};
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&tmu {
-	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
-};
-
-&rtc {
-	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-	status = "okay";
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&initial0 &sleep0>;
-
-	initial0: initial-state {
-		PIN_IN(gpa1-4, DOWN, LV1);
-		PIN_IN(gpa1-5, DOWN, LV1);
-
-		PIN_IN(gpc0-0, DOWN, LV1);
-		PIN_IN(gpc0-1, DOWN, LV1);
-		PIN_IN(gpc0-2, DOWN, LV1);
-		PIN_IN(gpc0-3, DOWN, LV1);
-		PIN_IN(gpc0-4, DOWN, LV1);
-
-		PIN_IN(gpd0-0, DOWN, LV1);
-		PIN_IN(gpd0-1, DOWN, LV1);
-	};
-
-	sleep0: sleep-state {
-		PIN_SLP(gpa0-0, INPUT, DOWN);
-		PIN_SLP(gpa0-1, INPUT, DOWN);
-		PIN_SLP(gpa0-2, INPUT, DOWN);
-		PIN_SLP(gpa0-3, INPUT, DOWN);
-		PIN_SLP(gpa0-4, INPUT, DOWN);
-		PIN_SLP(gpa0-5, INPUT, DOWN);
-		PIN_SLP(gpa0-6, INPUT, DOWN);
-		PIN_SLP(gpa0-7, INPUT, DOWN);
-
-		PIN_SLP(gpa1-0, INPUT, DOWN);
-		PIN_SLP(gpa1-1, INPUT, DOWN);
-		PIN_SLP(gpa1-2, INPUT, DOWN);
-		PIN_SLP(gpa1-3, INPUT, DOWN);
-		PIN_SLP(gpa1-4, INPUT, DOWN);
-		PIN_SLP(gpa1-5, INPUT, DOWN);
-
-		PIN_SLP(gpb-0, PREV, NONE);
-		PIN_SLP(gpb-1, PREV, NONE);
-		PIN_SLP(gpb-2, PREV, NONE);
-		PIN_SLP(gpb-3, PREV, NONE);
-		PIN_SLP(gpb-4, INPUT, DOWN);
-		PIN_SLP(gpb-5, INPUT, DOWN);
-		PIN_SLP(gpb-6, INPUT, DOWN);
-		PIN_SLP(gpb-7, INPUT, DOWN);
-
-		PIN_SLP(gpc0-0, INPUT, DOWN);
-		PIN_SLP(gpc0-1, INPUT, DOWN);
-		PIN_SLP(gpc0-2, INPUT, DOWN);
-		PIN_SLP(gpc0-3, INPUT, DOWN);
-		PIN_SLP(gpc0-4, INPUT, DOWN);
-
-		PIN_SLP(gpc1-0, INPUT, DOWN);
-		PIN_SLP(gpc1-1, INPUT, DOWN);
-		PIN_SLP(gpc1-2, INPUT, DOWN);
-		PIN_SLP(gpc1-3, INPUT, DOWN);
-		PIN_SLP(gpc1-4, INPUT, DOWN);
-
-		PIN_SLP(gpd0-0, INPUT, DOWN);
-		PIN_SLP(gpd0-1, INPUT, DOWN);
-		PIN_SLP(gpd0-2, INPUT, NONE);
-		PIN_SLP(gpd0-3, INPUT, NONE);
-
-		PIN_SLP(gpd1-0, INPUT, NONE);
-		PIN_SLP(gpd1-1, INPUT, NONE);
-		PIN_SLP(gpd1-2, INPUT, NONE);
-		PIN_SLP(gpd1-3, INPUT, NONE);
-	};
-};
-
-&pinctrl_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&initial1 &sleep1>;
-
-	initial1: initial-state {
-		PIN_IN(gpe0-6, DOWN, LV1);
-		PIN_IN(gpe0-7, DOWN, LV1);
-
-		PIN_IN(gpe1-0, DOWN, LV1);
-		PIN_IN(gpe1-3, DOWN, LV1);
-		PIN_IN(gpe1-4, DOWN, LV1);
-		PIN_IN(gpe1-5, DOWN, LV1);
-		PIN_IN(gpe1-6, DOWN, LV1);
-
-		PIN_IN(gpk2-0, DOWN, LV1);
-		PIN_IN(gpk2-1, DOWN, LV1);
-		PIN_IN(gpk2-2, DOWN, LV1);
-		PIN_IN(gpk2-3, DOWN, LV1);
-		PIN_IN(gpk2-4, DOWN, LV1);
-		PIN_IN(gpk2-5, DOWN, LV1);
-		PIN_IN(gpk2-6, DOWN, LV1);
-
-		PIN_IN(gpm0-0, DOWN, LV1);
-		PIN_IN(gpm0-1, DOWN, LV1);
-		PIN_IN(gpm0-2, DOWN, LV1);
-		PIN_IN(gpm0-3, DOWN, LV1);
-		PIN_IN(gpm0-4, DOWN, LV1);
-		PIN_IN(gpm0-5, DOWN, LV1);
-		PIN_IN(gpm0-6, DOWN, LV1);
-		PIN_IN(gpm0-7, DOWN, LV1);
-
-		PIN_IN(gpm1-0, DOWN, LV1);
-		PIN_IN(gpm1-1, DOWN, LV1);
-		PIN_IN(gpm1-2, DOWN, LV1);
-		PIN_IN(gpm1-3, DOWN, LV1);
-		PIN_IN(gpm1-4, DOWN, LV1);
-		PIN_IN(gpm1-5, DOWN, LV1);
-		PIN_IN(gpm1-6, DOWN, LV1);
-
-		PIN_IN(gpm2-0, DOWN, LV1);
-		PIN_IN(gpm2-1, DOWN, LV1);
-
-		PIN_IN(gpm3-0, DOWN, LV1);
-		PIN_IN(gpm3-1, DOWN, LV1);
-		PIN_IN(gpm3-2, DOWN, LV1);
-		PIN_IN(gpm3-3, DOWN, LV1);
-		PIN_IN(gpm3-4, DOWN, LV1);
-
-		PIN_IN(gpm4-1, DOWN, LV1);
-		PIN_IN(gpm4-2, DOWN, LV1);
-		PIN_IN(gpm4-3, DOWN, LV1);
-		PIN_IN(gpm4-4, DOWN, LV1);
-		PIN_IN(gpm4-5, DOWN, LV1);
-		PIN_IN(gpm4-6, DOWN, LV1);
-		PIN_IN(gpm4-7, DOWN, LV1);
-	};
-
-	sleep1: sleep-state {
-		PIN_SLP(gpe0-0, PREV, NONE);
-		PIN_SLP(gpe0-1, PREV, NONE);
-		PIN_SLP(gpe0-2, INPUT, DOWN);
-		PIN_SLP(gpe0-3, INPUT, UP);
-		PIN_SLP(gpe0-4, INPUT, DOWN);
-		PIN_SLP(gpe0-5, INPUT, DOWN);
-		PIN_SLP(gpe0-6, INPUT, DOWN);
-		PIN_SLP(gpe0-7, INPUT, DOWN);
-
-		PIN_SLP(gpe1-0, INPUT, DOWN);
-		PIN_SLP(gpe1-1, PREV, NONE);
-		PIN_SLP(gpe1-2, INPUT, DOWN);
-		PIN_SLP(gpe1-3, INPUT, DOWN);
-		PIN_SLP(gpe1-4, INPUT, DOWN);
-		PIN_SLP(gpe1-5, INPUT, DOWN);
-		PIN_SLP(gpe1-6, INPUT, DOWN);
-		PIN_SLP(gpe1-7, INPUT, NONE);
-
-		PIN_SLP(gpe2-0, INPUT, NONE);
-		PIN_SLP(gpe2-1, INPUT, NONE);
-		PIN_SLP(gpe2-2, INPUT, NONE);
-
-		PIN_SLP(gpk0-0, INPUT, DOWN);
-		PIN_SLP(gpk0-1, INPUT, DOWN);
-		PIN_SLP(gpk0-2, OUT0, NONE);
-		PIN_SLP(gpk0-3, INPUT, DOWN);
-		PIN_SLP(gpk0-4, INPUT, DOWN);
-		PIN_SLP(gpk0-5, INPUT, DOWN);
-		PIN_SLP(gpk0-6, INPUT, DOWN);
-		PIN_SLP(gpk0-7, INPUT, DOWN);
-
-		PIN_SLP(gpk1-0, INPUT, DOWN);
-		PIN_SLP(gpk1-1, INPUT, DOWN);
-		PIN_SLP(gpk1-2, INPUT, DOWN);
-		PIN_SLP(gpk1-3, INPUT, DOWN);
-		PIN_SLP(gpk1-4, INPUT, DOWN);
-		PIN_SLP(gpk1-5, INPUT, DOWN);
-		PIN_SLP(gpk1-6, INPUT, DOWN);
-
-		PIN_SLP(gpk2-0, INPUT, DOWN);
-		PIN_SLP(gpk2-1, INPUT, DOWN);
-		PIN_SLP(gpk2-2, INPUT, DOWN);
-		PIN_SLP(gpk2-3, INPUT, DOWN);
-		PIN_SLP(gpk2-4, INPUT, DOWN);
-		PIN_SLP(gpk2-5, INPUT, DOWN);
-		PIN_SLP(gpk2-6, INPUT, DOWN);
-
-		PIN_SLP(gpl0-0, INPUT, DOWN);
-		PIN_SLP(gpl0-1, INPUT, DOWN);
-		PIN_SLP(gpl0-2, INPUT, DOWN);
-		PIN_SLP(gpl0-3, INPUT, DOWN);
-
-		PIN_SLP(gpm0-0, INPUT, DOWN);
-		PIN_SLP(gpm0-1, INPUT, DOWN);
-		PIN_SLP(gpm0-2, INPUT, DOWN);
-		PIN_SLP(gpm0-3, INPUT, DOWN);
-		PIN_SLP(gpm0-4, INPUT, DOWN);
-		PIN_SLP(gpm0-5, INPUT, DOWN);
-		PIN_SLP(gpm0-6, INPUT, DOWN);
-		PIN_SLP(gpm0-7, INPUT, DOWN);
-
-		PIN_SLP(gpm1-0, INPUT, DOWN);
-		PIN_SLP(gpm1-1, INPUT, DOWN);
-		PIN_SLP(gpm1-2, INPUT, DOWN);
-		PIN_SLP(gpm1-3, INPUT, DOWN);
-		PIN_SLP(gpm1-4, INPUT, DOWN);
-		PIN_SLP(gpm1-5, INPUT, DOWN);
-		PIN_SLP(gpm1-6, INPUT, DOWN);
-
-		PIN_SLP(gpm2-0, INPUT, DOWN);
-		PIN_SLP(gpm2-1, INPUT, DOWN);
-		PIN_SLP(gpm2-2, INPUT, DOWN);
-		PIN_SLP(gpm2-3, INPUT, DOWN);
-		PIN_SLP(gpm2-4, INPUT, DOWN);
-
-		PIN_SLP(gpm3-0, INPUT, DOWN);
-		PIN_SLP(gpm3-1, INPUT, DOWN);
-		PIN_SLP(gpm3-2, INPUT, DOWN);
-		PIN_SLP(gpm3-3, INPUT, DOWN);
-		PIN_SLP(gpm3-4, INPUT, DOWN);
-		PIN_SLP(gpm3-5, INPUT, DOWN);
-		PIN_SLP(gpm3-6, INPUT, DOWN);
-		PIN_SLP(gpm3-7, INPUT, DOWN);
-
-		PIN_SLP(gpm4-0, INPUT, DOWN);
-		PIN_SLP(gpm4-1, INPUT, DOWN);
-		PIN_SLP(gpm4-2, INPUT, DOWN);
-		PIN_SLP(gpm4-3, INPUT, DOWN);
-		PIN_SLP(gpm4-4, INPUT, DOWN);
-		PIN_SLP(gpm4-5, INPUT, DOWN);
-		PIN_SLP(gpm4-6, INPUT, DOWN);
-		PIN_SLP(gpm4-7, INPUT, DOWN);
-	};
-};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
deleted file mode 100644
index bd37f1b587f03..0000000000000
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ /dev/null
@@ -1,950 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos3250 SoC device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
- * nodes can be added to this file.
- */
-
-#include "exynos4-cpu-thermal.dtsi"
-#include <dt-bindings/clock/exynos3250.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "samsung,exynos3250";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		serial2 = &serial_2;
-	};
-
-	bus_dmc: bus-dmc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu_dmc CLK_DIV_DMC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_dmc_opp_table>;
-		status = "disabled";
-
-		bus_dmc_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <825000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <875000>;
-			};
-		};
-	};
-
-	bus_fsys: bus-fsys {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_200>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_isp: bus-isp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_266>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_isp_opp_table>;
-		status = "disabled";
-
-		bus_isp_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp-300000000 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-	};
-
-	bus_lcd0: bus-lcd0 {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_160>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_leftbus: bus-leftbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_GDL>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mcuisp: bus-mcuisp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_mcuisp_opp_table>;
-		status = "disabled";
-
-		bus_mcuisp_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-			};
-		};
-	};
-
-	bus_mfc: bus-mfc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_SCLK_MFC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_peril: bus-peril {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_100>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_peril_opp_table>;
-		status = "disabled";
-
-		bus_peril_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-	};
-
-	bus_rightbus: bus-rightbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_GDR>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-			};
-		};
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-			clocks = <&cmu CLK_ARM_CLK>;
-			clock-names = "cpu";
-			#cooling-cells = <2>;
-
-			operating-points = <
-				1000000 1150000
-				900000  1112500
-				800000  1075000
-				700000  1037500
-				600000  1000000
-				500000  962500
-				400000  925000
-				300000  887500
-				200000  850000
-				100000  850000
-			>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-			clock-frequency = <1000000000>;
-			clocks = <&cmu CLK_ARM_CLK>;
-			clock-names = "cpu";
-			#cooling-cells = <2>;
-
-			operating-points = <
-				1000000 1150000
-				900000  1112500
-				800000  1075000
-				700000  1037500
-				600000  1000000
-				500000  962500
-				400000  925000
-				300000  887500
-				200000  850000
-				100000  850000
-			>;
-		};
-	};
-
-	xusbxti: clock-0 {
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-		#clock-cells = <0>;
-		clock-output-names = "xusbxti";
-	};
-
-	xxti: clock-1 {
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-		#clock-cells = <0>;
-		clock-output-names = "xxti";
-	};
-
-	xtcxo: clock-2 {
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-		#clock-cells = <0>;
-		clock-output-names = "xtcxo";
-	};
-
-	bus_leftbus_opp_table: opp-table-0 {
-		compatible = "operating-points-v2";
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <1000000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <1000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <1000000>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		sram@2020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x40000>;
-
-			smp-sram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sram@3f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x3f000 0x1000>;
-			};
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		sys_reg: syscon@10010000 {
-			compatible = "samsung,exynos3-sysreg", "syscon";
-			reg = <0x10010000 0x400>;
-		};
-
-		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos3250-pmu", "simple-mfd", "syscon";
-			reg = <0x10020000 0x4000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			clock-names = "clkout8";
-			clocks = <&cmu CLK_FIN_PLL>;
-			#clock-cells = <1>;
-
-			mipi_phy: mipi-phy {
-				compatible = "samsung,s5pv210-mipi-video-phy";
-				#phy-cells = <1>;
-			};
-		};
-
-		pd_cam: power-domain@10023c00 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023c00 0x20>;
-			#power-domain-cells = <0>;
-			label = "CAM";
-		};
-
-		pd_mfc: power-domain@10023c40 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023c40 0x20>;
-			#power-domain-cells = <0>;
-			label = "MFC";
-		};
-
-		pd_g3d: power-domain@10023c60 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023c60 0x20>;
-			#power-domain-cells = <0>;
-			label = "G3D";
-		};
-
-		pd_lcd0: power-domain@10023c80 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023c80 0x20>;
-			#power-domain-cells = <0>;
-			label = "LCD0";
-		};
-
-		pd_isp: power-domain@10023ca0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023ca0 0x20>;
-			#power-domain-cells = <0>;
-			label = "ISP";
-		};
-
-		cmu: clock-controller@10030000 {
-			compatible = "samsung,exynos3250-cmu";
-			reg = <0x10030000 0x20000>;
-			#clock-cells = <1>;
-			assigned-clocks = <&cmu CLK_MOUT_ACLK_400_MCUISP_SUB>,
-					  <&cmu CLK_MOUT_ACLK_266_SUB>;
-			assigned-clock-parents = <&cmu CLK_FIN_PLL>,
-						 <&cmu CLK_FIN_PLL>;
-		};
-
-		cmu_dmc: clock-controller@105c0000 {
-			compatible = "samsung,exynos3250-cmu-dmc";
-			reg = <0x105c0000 0x2000>;
-			#clock-cells = <1>;
-		};
-
-		rtc: rtc@10070000 {
-			compatible = "samsung,s3c6410-rtc";
-			reg = <0x10070000 0x100>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		tmu: tmu@100c0000 {
-			compatible = "samsung,exynos3250-tmu";
-			reg = <0x100c0000 0x100>;
-			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_TMU_APBIF>;
-			clock-names = "tmu_apbif";
-			#thermal-sensor-cells = <0>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x10481000 0x1000>,
-			      <0x10482000 0x2000>,
-			      <0x10484000 0x2000>,
-			      <0x10486000 0x2000>;
-			interrupts = <GIC_PPI 9
-					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		timer@10050000 {
-			compatible = "samsung,exynos3250-mct",
-				     "samsung,exynos4210-mct";
-			reg = <0x10050000 0x800>;
-			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-		};
-
-		pinctrl_1: pinctrl@11000000 {
-			compatible = "samsung,exynos3250-pinctrl";
-			reg = <0x11000000 0x1000>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos3250-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		jpeg: codec@11830000 {
-			compatible = "samsung,exynos3250-jpeg";
-			reg = <0x11830000 0x1000>;
-			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>;
-			clock-names = "jpeg", "sclk";
-			power-domains = <&pd_cam>;
-			assigned-clocks = <&cmu CLK_MOUT_CAM_BLK>, <&cmu CLK_SCLK_JPEG>;
-			assigned-clock-rates = <0>, <150000000>;
-			assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>;
-			iommus = <&sysmmu_jpeg>;
-			status = "disabled";
-		};
-
-		sysmmu_jpeg: sysmmu@11a60000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11a60000 0x1000>;
-			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>;
-			power-domains = <&pd_cam>;
-			#iommu-cells = <0>;
-		};
-
-		fimd: fimd@11c00000 {
-			compatible = "samsung,exynos3250-fimd";
-			reg = <0x11c00000 0x30000>;
-			interrupt-names = "fifo", "vsync", "lcd_sys";
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
-			clock-names = "sclk_fimd", "fimd";
-			power-domains = <&pd_lcd0>;
-			iommus = <&sysmmu_fimd0>;
-			samsung,sysreg = <&sys_reg>;
-			status = "disabled";
-		};
-
-		dsi_0: dsi@11c80000 {
-			compatible = "samsung,exynos3250-mipi-dsi";
-			reg = <0x11c80000 0x10000>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			samsung,phy-type = <0>;
-			power-domains = <&pd_lcd0>;
-			phys = <&mipi_phy 1>;
-			phy-names = "dsim";
-			clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>;
-			clock-names = "bus_clk", "pll_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sysmmu_fimd0: sysmmu@11e20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11e20000 0x1000>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
-			power-domains = <&pd_lcd0>;
-			#iommu-cells = <0>;
-		};
-
-		hsotg: usb@12480000 {
-			compatible = "samsung,s3c6400-hsotg";
-			reg = <0x12480000 0x20000>;
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_USBOTG>;
-			clock-names = "otg";
-			phys = <&exynos_usbphy 0>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		mshc_0: mmc@12510000 {
-			compatible = "samsung,exynos5420-dw-mshc";
-			reg = <0x12510000 0x1000>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mshc_1: mmc@12520000 {
-			compatible = "samsung,exynos5420-dw-mshc";
-			reg = <0x12520000 0x1000>;
-			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mshc_2: mmc@12530000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12530000 0x1000>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		exynos_usbphy: usb-phy@125b0000 {
-			compatible = "samsung,exynos3250-usb2-phy";
-			reg = <0x125b0000 0x100>;
-			samsung,pmureg-phandle = <&pmu_system_controller>;
-			clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>;
-			clock-names = "phy", "ref";
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		pdma0: dma-controller@12680000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12680000 0x1000>;
-			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		pdma1: dma-controller@12690000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12690000 0x1000>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		adc: adc@126c0000 {
-			compatible = "samsung,exynos3250-adc";
-			reg = <0x126c0000 0x100>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "adc", "sclk";
-			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
-			#io-channel-cells = <1>;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		gpu: gpu@13000000 {
-			compatible = "samsung,exynos4210-mali", "arm,mali-400";
-			reg = <0x13000000 0x10000>;
-			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gp",
-					  "gpmmu",
-					  "pp0",
-					  "ppmmu0",
-					  "pp1",
-					  "ppmmu1",
-					  "pp2",
-					  "ppmmu2",
-					  "pp3",
-					  "ppmmu3",
-					  "pmu";
-			clocks = <&cmu CLK_G3D>,
-				 <&cmu CLK_SCLK_G3D>;
-			clock-names = "bus", "core";
-			power-domains = <&pd_g3d>;
-			status = "disabled";
-			/* TODO: operating points for DVFS, assigned clock as 134 MHz */
-		};
-
-		mfc: codec@13400000 {
-			compatible = "samsung,exynos3250-mfc", "samsung,mfc-v7";
-			reg = <0x13400000 0x10000>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "mfc", "sclk_mfc";
-			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
-			power-domains = <&pd_mfc>;
-			iommus = <&sysmmu_mfc>;
-		};
-
-		sysmmu_mfc: sysmmu@13620000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13620000 0x1000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>;
-			power-domains = <&pd_mfc>;
-			#iommu-cells = <0>;
-		};
-
-		serial_0: serial@13800000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13800000 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_data &uart0_fctl>;
-			status = "disabled";
-		};
-
-		serial_1: serial@13810000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13810000 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_data>;
-			status = "disabled";
-		};
-
-		serial_2: serial@13820000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13820000 0x100>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart2_data>;
-			status = "disabled";
-		};
-
-		i2c_0: i2c@13860000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13860000 0x100>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C0>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_bus>;
-			status = "disabled";
-		};
-
-		i2c_1: i2c@13870000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13870000 0x100>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C1>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_bus>;
-			status = "disabled";
-		};
-
-		i2c_2: i2c@13880000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13880000 0x100>;
-			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C2>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_bus>;
-			status = "disabled";
-		};
-
-		i2c_3: i2c@13890000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13890000 0x100>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C3>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c3_bus>;
-			status = "disabled";
-		};
-
-		i2c_4: i2c@138a0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138a0000 0x100>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C4>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c4_bus>;
-			status = "disabled";
-		};
-
-		i2c_5: i2c@138b0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138b0000 0x100>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C5>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c5_bus>;
-			status = "disabled";
-		};
-
-		i2c_6: i2c@138c0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138c0000 0x100>;
-			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C6>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c6_bus>;
-			status = "disabled";
-		};
-
-		i2c_7: i2c@138d0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138d0000 0x100>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C7>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c7_bus>;
-			status = "disabled";
-		};
-
-		spi_0: spi@13920000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13920000 0x100>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 7>, <&pdma0 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-			status = "disabled";
-		};
-
-		spi_1: spi@13930000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13930000 0x100>;
-			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma1 7>, <&pdma1 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-			status = "disabled";
-		};
-
-		i2s2: i2s@13970000 {
-			compatible = "samsung,s3c6410-i2s";
-			reg = <0x13970000 0x100>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
-			clock-names = "iis", "i2s_opclk0";
-			dmas = <&pdma0 14>, <&pdma0 13>;
-			dma-names = "tx", "rx";
-			pinctrl-0 = <&i2s2_bus>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		pwm: pwm@139d0000 {
-			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139d0000 0x1000>;
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		ppmu_dmc0: ppmu@106a0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x106a0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_dmc1: ppmu@106b0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x106b0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_cpu: ppmu@106c0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x106c0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_rightbus: ppmu@112a0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x112a0000 0x2000>;
-			clocks = <&cmu CLK_PPMURIGHT>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_leftbus: ppmu@116a0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x116a0000 0x2000>;
-			clocks = <&cmu CLK_PPMULEFT>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_camif: ppmu@11ac0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x11ac0000 0x2000>;
-			clocks = <&cmu CLK_PPMUCAMIF>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_lcd0: ppmu@11e40000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x11e40000 0x2000>;
-			clocks = <&cmu CLK_PPMULCD0>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_fsys: ppmu@12630000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x12630000 0x2000>;
-			clocks = <&cmu CLK_PPMUFILE>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_g3d: ppmu@13220000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x13220000 0x2000>;
-			clocks = <&cmu CLK_PPMUG3D>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_mfc: ppmu@13660000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x13660000 0x2000>;
-			clocks = <&cmu CLK_PPMUMFC_L>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-	};
-};
-
-#include "exynos3250-pinctrl.dtsi"
-#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
deleted file mode 100644
index 27a1a89526655..0000000000000
--- a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos4 thermal zone
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-thermal-zones {
-	cpu_thermal: cpu-thermal {
-		thermal-sensors = <&tmu>;
-		polling-delay-passive = <0>;
-		polling-delay = <0>;
-		trips {
-			cpu_alert0: cpu-alert-0 {
-				temperature = <70000>; /* millicelsius */
-				hysteresis = <10000>; /* millicelsius */
-				type = "active";
-			};
-			cpu_alert1: cpu-alert-1 {
-				temperature = <95000>; /* millicelsius */
-				hysteresis = <10000>; /* millicelsius */
-				type = "active";
-			};
-			cpu_alert2: cpu-alert-2 {
-				temperature = <110000>; /* millicelsius */
-				hysteresis = <10000>; /* millicelsius */
-				type = "active";
-			};
-			cpu_crit0: cpu-crit-0 {
-				temperature = <120000>; /* millicelsius */
-				hysteresis = <0>; /* millicelsius */
-				type = "critical";
-			};
-		};
-		cooling-maps {
-			map0 {
-				trip = <&cpu_alert0>;
-			};
-			map1 {
-				trip = <&cpu_alert1>;
-			};
-		};
-	};
-};
-};
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
deleted file mode 100644
index 8dd6976ab0a71..0000000000000
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ /dev/null
@@ -1,1007 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4 SoC series common device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4 SoC series device nodes are listed in this file.  Particular
- * SoCs from Exynos4 series can include this file and provide values for SoCs
- * specfic bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
- * nodes can be added to this file.
- */
-
-#include <dt-bindings/clock/exynos4.h>
-#include <dt-bindings/clock/exynos-audss-clk.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-		i2c8 = &i2c_8;
-		csis0 = &csis_0;
-		csis1 = &csis_1;
-		fimc0 = &fimc_0;
-		fimc1 = &fimc_1;
-		fimc2 = &fimc_2;
-		fimc3 = &fimc_3;
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		serial2 = &serial_2;
-		serial3 = &serial_3;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&combiner>;
-		status = "disabled";
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clock_audss: clock-controller@3810000 {
-			compatible = "samsung,exynos4210-audss-clock";
-			reg = <0x03810000 0x0c>;
-			#clock-cells = <1>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
-				 <&clock CLK_SCLK_AUDIO0>,
-				 <&clock CLK_SCLK_AUDIO0>;
-			clock-names = "pll_ref", "pll_in", "sclk_audio",
-				      "sclk_pcm_in";
-		};
-
-		i2s0: i2s@3830000 {
-			compatible = "samsung,s5pv210-i2s";
-			reg = <0x03830000 0x100>;
-			clocks = <&clock_audss EXYNOS_I2S_BUS>,
-				 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
-				 <&clock_audss EXYNOS_SCLK_I2S>;
-			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-			#clock-cells = <1>;
-			clock-output-names = "i2s_cdclk0";
-			dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
-			dma-names = "tx", "rx", "tx-sec";
-			samsung,idma-addr = <0x03000000>;
-			#sound-dai-cells = <1>;
-			status = "disabled";
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		scu: snoop-control-unit@10500000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x10500000 0x2000>;
-		};
-
-		memory-controller@12570000 {
-			compatible = "samsung,exynos4210-srom";
-			reg = <0x12570000 0x14>;
-		};
-
-		pd_mfc: power-domain@10023c40 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023c40 0x20>;
-			#power-domain-cells = <0>;
-			label = "MFC";
-		};
-
-		pd_g3d: power-domain@10023c60 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023c60 0x20>;
-			#power-domain-cells = <0>;
-			label = "G3D";
-		};
-
-		pd_lcd0: power-domain@10023c80 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023c80 0x20>;
-			#power-domain-cells = <0>;
-			label = "LCD0";
-		};
-
-		pd_tv: power-domain@10023c20 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023c20 0x20>;
-			#power-domain-cells = <0>;
-			power-domains = <&pd_lcd0>;
-			label = "TV";
-		};
-
-		pd_cam: power-domain@10023c00 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023c00 0x20>;
-			#power-domain-cells = <0>;
-			label = "CAM";
-		};
-
-		pd_gps: power-domain@10023ce0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023ce0 0x20>;
-			#power-domain-cells = <0>;
-			label = "GPS";
-		};
-
-		pd_gps_alive: power-domain@10023d00 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023d00 0x20>;
-			#power-domain-cells = <0>;
-			label = "GPS alive";
-		};
-
-		gic: interrupt-controller@10490000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
-		};
-
-		combiner: interrupt-controller@10440000 {
-			compatible = "samsung,exynos4210-combiner";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0x10440000 0x1000>;
-		};
-
-		sys_reg: syscon@10010000 {
-			compatible = "samsung,exynos4-sysreg", "syscon";
-			reg = <0x10010000 0x400>;
-		};
-
-		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos4210-pmu", "simple-mfd", "syscon";
-			reg = <0x10020000 0x4000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-
-			mipi_phy: mipi-phy {
-				compatible = "samsung,s5pv210-mipi-video-phy";
-				#phy-cells = <1>;
-			};
-		};
-
-		dsi_0: dsi@11c80000 {
-			compatible = "samsung,exynos4210-mipi-dsi";
-			reg = <0x11c80000 0x10000>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_lcd0>;
-			phys = <&mipi_phy 1>;
-			phy-names = "dsim";
-			clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
-			clock-names = "bus_clk", "sclk_mipi";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		camera: camera {
-			compatible = "samsung,fimc", "simple-bus";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#clock-cells = <1>;
-			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
-
-			fimc_0: fimc@11800000 {
-				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11800000 0x1000>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_FIMC0>,
-					 <&clock CLK_SCLK_FIMC0>;
-				clock-names = "fimc", "sclk_fimc";
-				power-domains = <&pd_cam>;
-				samsung,sysreg = <&sys_reg>;
-				iommus = <&sysmmu_fimc0>;
-				status = "disabled";
-			};
-
-			fimc_1: fimc@11810000 {
-				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11810000 0x1000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_FIMC1>,
-					 <&clock CLK_SCLK_FIMC1>;
-				clock-names = "fimc", "sclk_fimc";
-				power-domains = <&pd_cam>;
-				samsung,sysreg = <&sys_reg>;
-				iommus = <&sysmmu_fimc1>;
-				status = "disabled";
-			};
-
-			fimc_2: fimc@11820000 {
-				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11820000 0x1000>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_FIMC2>,
-					 <&clock CLK_SCLK_FIMC2>;
-				clock-names = "fimc", "sclk_fimc";
-				power-domains = <&pd_cam>;
-				samsung,sysreg = <&sys_reg>;
-				iommus = <&sysmmu_fimc2>;
-				status = "disabled";
-			};
-
-			fimc_3: fimc@11830000 {
-				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11830000 0x1000>;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_FIMC3>,
-					 <&clock CLK_SCLK_FIMC3>;
-				clock-names = "fimc", "sclk_fimc";
-				power-domains = <&pd_cam>;
-				samsung,sysreg = <&sys_reg>;
-				iommus = <&sysmmu_fimc3>;
-				status = "disabled";
-			};
-
-			csis_0: csis@11880000 {
-				compatible = "samsung,exynos4210-csis";
-				reg = <0x11880000 0x4000>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_CSIS0>,
-					 <&clock CLK_SCLK_CSIS0>;
-				clock-names = "csis", "sclk_csis";
-				bus-width = <4>;
-				power-domains = <&pd_cam>;
-				phys = <&mipi_phy 0>;
-				phy-names = "csis";
-				status = "disabled";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			csis_1: csis@11890000 {
-				compatible = "samsung,exynos4210-csis";
-				reg = <0x11890000 0x4000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_CSIS1>,
-					 <&clock CLK_SCLK_CSIS1>;
-				clock-names = "csis", "sclk_csis";
-				bus-width = <2>;
-				power-domains = <&pd_cam>;
-				phys = <&mipi_phy 2>;
-				phy-names = "csis";
-				status = "disabled";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		rtc: rtc@10070000 {
-			compatible = "samsung,s3c6410-rtc";
-			reg = <0x10070000 0x100>;
-			interrupt-parent = <&pmu_system_controller>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_RTC>;
-			clock-names = "rtc";
-			status = "disabled";
-		};
-
-		keypad: keypad@100a0000 {
-			compatible = "samsung,s5pv210-keypad";
-			reg = <0x100a0000 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_KEYIF>;
-			clock-names = "keypad";
-			status = "disabled";
-		};
-
-		sdhci_0: mmc@12510000 {
-			compatible = "samsung,exynos4210-sdhci";
-			reg = <0x12510000 0x100>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
-			clock-names = "hsmmc", "mmc_busclk.2";
-			status = "disabled";
-		};
-
-		sdhci_1: mmc@12520000 {
-			compatible = "samsung,exynos4210-sdhci";
-			reg = <0x12520000 0x100>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
-			clock-names = "hsmmc", "mmc_busclk.2";
-			status = "disabled";
-		};
-
-		sdhci_2: mmc@12530000 {
-			compatible = "samsung,exynos4210-sdhci";
-			reg = <0x12530000 0x100>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
-			clock-names = "hsmmc", "mmc_busclk.2";
-			status = "disabled";
-		};
-
-		sdhci_3: mmc@12540000 {
-			compatible = "samsung,exynos4210-sdhci";
-			reg = <0x12540000 0x100>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
-			clock-names = "hsmmc", "mmc_busclk.2";
-			status = "disabled";
-		};
-
-		exynos_usbphy: usb-phy@125b0000 {
-			compatible = "samsung,exynos4210-usb2-phy";
-			reg = <0x125b0000 0x100>;
-			samsung,pmureg-phandle = <&pmu_system_controller>;
-			clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
-			clock-names = "phy", "ref";
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		hsotg: usb@12480000 {
-			compatible = "samsung,s3c6400-hsotg";
-			reg = <0x12480000 0x20000>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_USB_DEVICE>;
-			clock-names = "otg";
-			phys = <&exynos_usbphy 0>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		ehci: usb@12580000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0x12580000 0x100>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_USB_HOST>;
-			clock-names = "usbhost";
-			status = "disabled";
-			phys = <&exynos_usbphy 1>, <&exynos_usbphy 2>, <&exynos_usbphy 3>;
-			phy-names = "host", "hsic0", "hsic1";
-		};
-
-		ohci: usb@12590000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0x12590000 0x100>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_USB_HOST>;
-			clock-names = "usbhost";
-			status = "disabled";
-			phys = <&exynos_usbphy 1>;
-			phy-names = "host";
-		};
-
-		gpu: gpu@13000000 {
-			compatible = "samsung,exynos4210-mali", "arm,mali-400";
-			reg = <0x13000000 0x10000>;
-			/*
-			 * CLK_G3D is not actually bus clock but a IP-level clock.
-			 * The bus clock is not described in hardware manual.
-			 */
-			clocks = <&clock CLK_G3D>,
-				 <&clock CLK_SCLK_G3D>;
-			clock-names = "bus", "core";
-			power-domains = <&pd_g3d>;
-			status = "disabled";
-		};
-
-		i2s1: i2s@13960000 {
-			compatible = "samsung,s3c6410-i2s";
-			reg = <0x13960000 0x100>;
-			clocks = <&clock CLK_I2S1>;
-			clock-names = "iis";
-			#clock-cells = <1>;
-			clock-output-names = "i2s_cdclk1";
-			dmas = <&pdma1 12>, <&pdma1 11>;
-			dma-names = "tx", "rx";
-			#sound-dai-cells = <1>;
-			status = "disabled";
-		};
-
-		i2s2: i2s@13970000 {
-			compatible = "samsung,s3c6410-i2s";
-			reg = <0x13970000 0x100>;
-			clocks = <&clock CLK_I2S2>;
-			clock-names = "iis";
-			#clock-cells = <1>;
-			clock-output-names = "i2s_cdclk2";
-			dmas = <&pdma0 14>, <&pdma0 13>;
-			dma-names = "tx", "rx";
-			#sound-dai-cells = <1>;
-			status = "disabled";
-		};
-
-		mfc: codec@13400000 {
-			compatible = "samsung,mfc-v5";
-			reg = <0x13400000 0x10000>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_mfc>;
-			clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
-			clock-names = "mfc", "sclk_mfc";
-			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-			iommu-names = "left", "right";
-		};
-
-		serial_0: serial@13800000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13800000 0x100>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			dmas = <&pdma0 15>, <&pdma0 16>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		serial_1: serial@13810000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13810000 0x100>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			dmas = <&pdma1 15>, <&pdma1 16>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		serial_2: serial@13820000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13820000 0x100>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			dmas = <&pdma0 17>, <&pdma0 18>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		serial_3: serial@13830000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13830000 0x100>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-			clock-names = "uart", "clk_uart_baud0";
-			dmas = <&pdma1 17>, <&pdma1 18>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		i2c_0: i2c@13860000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13860000 0x100>;
-			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_I2C0>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_bus>;
-			status = "disabled";
-		};
-
-		i2c_1: i2c@13870000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13870000 0x100>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_I2C1>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_bus>;
-			status = "disabled";
-		};
-
-		i2c_2: i2c@13880000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13880000 0x100>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_I2C2>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_bus>;
-			status = "disabled";
-		};
-
-		i2c_3: i2c@13890000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13890000 0x100>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_I2C3>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c3_bus>;
-			status = "disabled";
-		};
-
-		i2c_4: i2c@138a0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138a0000 0x100>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_I2C4>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c4_bus>;
-			status = "disabled";
-		};
-
-		i2c_5: i2c@138b0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138b0000 0x100>;
-			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_I2C5>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c5_bus>;
-			status = "disabled";
-		};
-
-		i2c_6: i2c@138c0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138c0000 0x100>;
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_I2C6>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c6_bus>;
-			status = "disabled";
-		};
-
-		i2c_7: i2c@138d0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138d0000 0x100>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_I2C7>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c7_bus>;
-			status = "disabled";
-		};
-
-		i2c_8: i2c@138e0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-hdmiphy-i2c";
-			reg = <0x138e0000 0x100>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_I2C_HDMI>;
-			clock-names = "i2c";
-			status = "disabled";
-
-			hdmi_i2c_phy: hdmi-phy@38 {
-				compatible = "samsung,exynos4210-hdmiphy";
-				reg = <0x38>;
-			};
-		};
-
-		spi_0: spi@13920000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13920000 0x100>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 7>, <&pdma0 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-			status = "disabled";
-		};
-
-		spi_1: spi@13930000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13930000 0x100>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma1 7>, <&pdma1 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-			status = "disabled";
-		};
-
-		spi_2: spi@13940000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13940000 0x100>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 9>, <&pdma0 8>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-			clock-names = "spi", "spi_busclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_bus>;
-			status = "disabled";
-		};
-
-		pwm: pwm@139d0000 {
-			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139d0000 0x1000>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_PWM>;
-			clock-names = "timers";
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		pdma0: dma-controller@12680000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12680000 0x1000>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		pdma1: dma-controller@12690000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12690000 0x1000>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		mdma1: dma-controller@12850000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12850000 0x1000>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MDMA>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		fimd: fimd@11c00000 {
-			compatible = "samsung,exynos4210-fimd";
-			interrupt-parent = <&combiner>;
-			reg = <0x11c00000 0x20000>;
-			interrupt-names = "fifo", "vsync", "lcd_sys";
-			interrupts = <11 0>, <11 1>, <11 2>;
-			clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
-			clock-names = "sclk_fimd", "fimd";
-			power-domains = <&pd_lcd0>;
-			iommus = <&sysmmu_fimd0>;
-			samsung,sysreg = <&sys_reg>;
-			status = "disabled";
-		};
-
-		tmu: tmu@100c0000 {
-			interrupt-parent = <&combiner>;
-			reg = <0x100c0000 0x100>;
-			interrupts = <2 4>;
-			status = "disabled";
-			#thermal-sensor-cells = <0>;
-		};
-
-		jpeg_codec: jpeg-codec@11840000 {
-			compatible = "samsung,exynos4210-jpeg";
-			reg = <0x11840000 0x1000>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_JPEG>;
-			clock-names = "jpeg";
-			power-domains = <&pd_cam>;
-			iommus = <&sysmmu_jpeg>;
-		};
-
-		rotator: rotator@12810000 {
-			compatible = "samsung,exynos4210-rotator";
-			reg = <0x12810000 0x64>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_ROTATOR>;
-			clock-names = "rotator";
-			iommus = <&sysmmu_rotator>;
-		};
-
-		hdmi: hdmi@12d00000 {
-			compatible = "samsung,exynos4210-hdmi";
-			reg = <0x12d00000 0x70000>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-				      "sclk_hdmiphy", "mout_hdmi";
-			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-				 <&clock CLK_SCLK_PIXEL>,
-				 <&clock CLK_SCLK_HDMIPHY>,
-				 <&clock CLK_MOUT_HDMI>;
-			phy = <&hdmi_i2c_phy>;
-			power-domains = <&pd_tv>;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			#sound-dai-cells = <0>;
-			status = "disabled";
-		};
-
-		hdmicec: cec@100b0000 {
-			compatible = "samsung,s5p-cec";
-			reg = <0x100b0000 0x200>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_HDMI_CEC>;
-			clock-names = "hdmicec";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			hdmi-phandle = <&hdmi>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdmi_cec>;
-			status = "disabled";
-		};
-
-		mixer: mixer@12c10000 {
-			compatible = "samsung,exynos4210-mixer";
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x12c10000 0x2100>, <0x12c00000 0x300>;
-			power-domains = <&pd_tv>;
-			iommus = <&sysmmu_tv>;
-			status = "disabled";
-		};
-
-		ppmu_dmc0: ppmu@106a0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x106a0000 0x2000>;
-			clocks = <&clock CLK_PPMUDMC0>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_dmc1: ppmu@106b0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x106b0000 0x2000>;
-			clocks = <&clock CLK_PPMUDMC1>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_cpu: ppmu@106c0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x106c0000 0x2000>;
-			clocks = <&clock CLK_PPMUCPU>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_rightbus: ppmu@112a0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x112a0000 0x2000>;
-			clocks = <&clock CLK_PPMURIGHT>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_leftbus: ppmu@116a0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x116a0000 0x2000>;
-			clocks = <&clock CLK_PPMULEFT>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_camif: ppmu@11ac0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x11ac0000 0x2000>;
-			clocks = <&clock CLK_PPMUCAMIF>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_lcd0: ppmu@11e40000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x11e40000 0x2000>;
-			clocks = <&clock CLK_PPMULCD0>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_fsys: ppmu@12630000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x12630000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_image: ppmu@12aa0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x12aa0000 0x2000>;
-			clocks = <&clock CLK_PPMUIMAGE>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_tv: ppmu@12e40000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x12e40000 0x2000>;
-			clocks = <&clock CLK_PPMUTV>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_g3d: ppmu@13220000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x13220000 0x2000>;
-			clocks = <&clock CLK_PPMUG3D>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_mfc_left: ppmu@13660000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x13660000 0x2000>;
-			clocks = <&clock CLK_PPMUMFC_L>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_mfc_right: ppmu@13670000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x13670000 0x2000>;
-			clocks = <&clock CLK_PPMUMFC_R>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		sysmmu_mfc_l: sysmmu@13620000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13620000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <5 5>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-			power-domains = <&pd_mfc>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_mfc_r: sysmmu@13630000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13630000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <5 6>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-			power-domains = <&pd_mfc>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_tv: sysmmu@12e20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12e20000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <5 4>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
-			power-domains = <&pd_tv>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc0: sysmmu@11a20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11a20000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>;
-			power-domains = <&pd_cam>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc1: sysmmu@11a30000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11a30000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 3>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>;
-			power-domains = <&pd_cam>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc2: sysmmu@11a40000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11a40000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 4>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>;
-			power-domains = <&pd_cam>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc3: sysmmu@11a50000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11a50000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 5>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>;
-			power-domains = <&pd_cam>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_jpeg: sysmmu@11a60000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11a60000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 6>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-			power-domains = <&pd_cam>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_rotator: sysmmu@12a30000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12a30000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <5 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_ROTATOR>,
-				 <&clock CLK_ROTATOR>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimd0: sysmmu@11e20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11e20000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <5 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>;
-			power-domains = <&pd_lcd0>;
-			#iommu-cells = <0>;
-		};
-
-		sss: sss@10830000 {
-			compatible = "samsung,exynos4210-secss";
-			reg = <0x10830000 0x300>;
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SSS>;
-			clock-names = "secss";
-		};
-
-		prng: rng@10830400 {
-			compatible = "samsung,exynos4-rng";
-			reg = <0x10830400 0x200>;
-			clocks = <&clock CLK_SSS>;
-			clock-names = "secss";
-		};
-	};
-};
-
-#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
deleted file mode 100644
index 37cd4dde53e47..0000000000000
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ /dev/null
@@ -1,860 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2020 Stenkin Evgeniy <stenkinevgeniy@gmail.com>
- * Copyright (c) 2020 Paul Cercueil <paul@crapouillou.net>
- */
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-#include "exynos4412-ppmu-common.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-
-/ {
-	model = "Samsung Galaxy S2 (GT-I9100)";
-	compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4";
-	chassis-type = "handset";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	aliases {
-		mmc0 = &sdhci_0;
-		mmc1 = &sdhci_2;
-		mmc2 = &sdhci_3;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	vemmc_reg: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	tsp_reg: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "TSP_FIXED_VOLTAGES";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	cam_af_28v_reg: regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "8M_AF_2.8V_EN";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	cam_io_en_reg: regulator-3 {
-		compatible = "regulator-fixed";
-		regulator-name = "CAM_IO_EN";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	cam_io_12v_reg: regulator-4 {
-		compatible = "regulator-fixed";
-		regulator-name = "8M_1.2V_EN";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vt_core_15v_reg: regulator-5 {
-		compatible = "regulator-fixed";
-		regulator-name = "VT_CORE_1.5V";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-vol-down {
-			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			label = "volume down";
-			debounce-interval = <10>;
-		};
-
-		key-vol-up {
-			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			label = "volume up";
-			debounce-interval = <10>;
-		};
-
-		key-power {
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "power";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-
-		key-ok {
-			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_OK>;
-			label = "ok";
-			debounce-interval = <10>;
-		};
-	};
-
-	wlan_pwrseq: sdhci3-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
-	};
-
-	i2c_max17042_fuel: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sda-gpios = <&gpy4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpy4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-
-		battery@36 {
-			compatible = "maxim,max17042";
-
-			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-
-			pinctrl-0 = <&max17042_fuel_irq>;
-			pinctrl-names = "default";
-
-			reg = <0x36>;
-			maxim,over-heat-temp = <700>;
-			maxim,over-volt = <4500>;
-		};
-	};
-
-	i2c_s5k5baf: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sda-gpios = <&gpc1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpc1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-
-		image-sensor@2d {
-			compatible = "samsung,s5k5baf";
-			reg = <0x2d>;
-			vdda-supply = <&cam_io_en_reg>;
-			vddreg-supply = <&vt_core_15v_reg>;
-			vddio-supply = <&vtcam_reg>;
-			clocks = <&camera 0>;
-			clock-names = "mclk";
-			stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>;
-			rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>;
-			clock-frequency = <24000000>;
-
-			port {
-				s5k5bafx_ep: endpoint {
-					remote-endpoint = <&csis1_ep>;
-					data-lanes = <1>;
-				};
-			};
-		};
-	};
-
-	spi-3 {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		num-chipselects = <1>;
-		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
-		sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
-
-		lcd@0 {
-			compatible = "samsung,ld9040";
-			reg = <0>;
-
-			spi-max-frequency = <1200000>;
-
-			vdd3-supply = <&vmipi_reg>;
-			vci-supply = <&vcclcd_reg>;
-
-			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
-			power-on-delay = <10>;
-			reset-delay = <10>;
-
-			panel-width-mm = <90>;
-			panel-height-mm = <154>;
-
-			display-timings {
-				timing {
-					clock-frequency = <23492370>;
-					hactive = <480>;
-					vactive = <800>;
-					hback-porch = <16>;
-					hfront-porch = <16>;
-					vback-porch = <2>;
-					vfront-porch = <28>;
-					hsync-len = <2>;
-					vsync-len = <1>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <0>;
-					pixelclk-active = <0>;
-				};
-			};
-
-			port {
-				lcd_ep: endpoint {
-					remote-endpoint = <&fimd_dpi_ep>;
-				};
-			};
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-
-		pmic_ap_clk: pmic-ap-clk {
-			/* Workaround for missing clock on max8997 PMIC */
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-};
-
-&camera {
-	pinctrl-0 = <&cam_port_a_clk_active>;
-	pinctrl-names = "default";
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_CAM0>, <&clock CLK_MOUT_CAM1>;
-	assigned-clock-parents = <&clock CLK_XUSBXTI>, <&clock CLK_XUSBXTI>;
-};
-
-&csis_1 {
-	status = "okay";
-	vddcore-supply = <&vusb_reg>;
-	vddio-supply = <&vmipi_reg>;
-	clock-frequency = <160000000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	port@4 {
-		reg = <4>;
-		csis1_ep: endpoint {
-			remote-endpoint = <&s5k5bafx_ep>;
-			data-lanes = <1>;
-			samsung,csis-hs-settle = <6>;
-		};
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&varm_breg>;
-};
-
-&cpu_thermal {
-	cooling-maps {
-		map0 {
-			/* Corresponds to 800MHz */
-			cooling-device = <&cpu0 2 2>;
-		};
-		map1 {
-			/* Corresponds to 200MHz */
-			cooling-device = <&cpu0 4 4>;
-		};
-	};
-};
-
-&ehci {
-	status = "okay";
-
-	phys = <&exynos_usbphy 1>;
-	phy-names = "host";
-};
-
-&exynos_usbphy {
-	status = "okay";
-
-	vbus-supply = <&safe1_sreg>;
-};
-
-&fimc_0 {
-	status = "okay";
-
-	assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_1 {
-	/* Back camera not implemented */
-	status = "disabled";
-
-	assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_2 {
-	status = "okay";
-
-	assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_3 {
-	/* Back camera not implemented */
-	status = "disabled";
-
-	assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimd {
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	samsung,invert-vden;
-	samsung,invert-vclk;
-
-	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
-	pinctrl-names = "default";
-
-	port@3 {
-		reg = <3>;
-
-		fimd_dpi_ep: endpoint {
-			remote-endpoint = <&lcd_ep>;
-		};
-	};
-};
-
-&gpu {
-	status = "okay";
-
-	mali-supply = <&vg3d_breg>;
-};
-
-&hsotg {
-	status = "okay";
-
-	dr_mode = "otg";
-	vusb_d-supply = <&vusb_reg>;
-	vusb_a-supply = <&vusbdac_reg>;
-};
-
-&i2c_3 {
-	status = "okay";
-
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-
-	pinctrl-0 = <&i2c3_bus>;
-	pinctrl-names = "default";
-
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-
-		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&i2c_5 {
-	status = "okay";
-
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-
-	pinctrl-0 = <&i2c5_bus>;
-	pinctrl-names = "default";
-
-	pmic@66 {
-		compatible = "maxim,max8997-pmic";
-		reg = <0x66>;
-
-		interrupts-extended = <&gpx0 7 IRQ_TYPE_NONE>,
-				      <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
-
-		max8997,pmic-buck1-uses-gpio-dvs;
-		max8997,pmic-buck2-uses-gpio-dvs;
-		max8997,pmic-buck5-uses-gpio-dvs;
-
-		max8997,pmic-ignore-gpiodvs-side-effect;
-		max8997,pmic-buck125-default-dvs-idx = <0>;
-
-		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
-						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
-						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
-
-		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
-						 <1250000>, <1200000>,
-						 <1150000>, <1100000>,
-						 <1000000>, <950000>;
-
-		max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
-						 <950000>,  <900000>,
-						 <1100000>, <1000000>,
-						 <950000>,  <900000>;
-
-		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>;
-
-		pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
-		pinctrl-names = "default";
-
-		charger-supply = <&charger_reg>;
-
-		regulators {
-			vadc_reg: LDO1 {
-				regulator-name = "VADC_3.3V_C210";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-
-			};
-			valive_reg: LDO2 {
-				regulator-name = "VALIVE_1.1V_C210";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-
-			};
-
-			vusb_reg: LDO3 {
-				regulator-name = "VUSB_1.1V_C210";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-			};
-
-			vmipi_reg: LDO4 {
-				regulator-name = "VMIPI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vhsic_reg: LDO5 {
-				regulator-name = "VHSIC_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vpda_reg: LDO6 {
-				regulator-name = "VCC_1.8V_PDA";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vcam_reg: LDO7 {
-				regulator-name = "CAM_ISP_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vusbdac_reg: LDO8 {
-				regulator-name = "VUSB+VDAC_3.3V_C210";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vccpda_reg: LDO9 {
-				regulator-name = "VCC_2.8V_PDA";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			vtouch_reg: LDO11 {
-				regulator-name = "TOUCH_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			vpll_reg: LDO10 {
-				regulator-name = "VPLL_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			vtcam_reg: LDO12 {
-				regulator-name = "VT_CAM_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vcclcd_reg: LDO13 {
-				regulator-name = "VCC_3.0V_LCD";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vmotor_reg: LDO14 {
-				regulator-name = "VCC_2.8V_MOTOR";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			vled_reg: LDO15 {
-				regulator-name = "LED_A_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			camsensor_reg: LDO16 {
-				regulator-name = "CAM_SENSOR_IO_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vtf_reg: LDO17 {
-				regulator-name = "VTF_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			vtouchled_reg: LDO18 {
-				regulator-name = "TOUCH_LED_3.3V";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vddq_reg: LDO21 {
-				regulator-name = "VDDQ_M1M2_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			varm_breg: BUCK1 {
-				regulator-name = "VARM_1.2V_C210";
-				regulator-min-microvolt = <65000>;
-				regulator-max-microvolt = <2225000>;
-				regulator-always-on;
-			};
-
-			vint_breg: BUCK2 {
-				regulator-name = "VINT_1.1V_C210";
-				regulator-min-microvolt = <65000>;
-				regulator-max-microvolt = <2225000>;
-				regulator-always-on;
-			};
-
-			vg3d_breg: BUCK3 {
-				regulator-name = "G3D_1.1V";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-microvolt-offset = <50000>;
-				regulator-always-on;
-			};
-
-			camisp_breg: BUCK4 {
-				regulator-name = "CAM_ISP_CORE_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			vmem_breg: BUCK5 {
-				regulator-name = "VMEM_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vccsub_breg: BUCK7 {
-				regulator-name = "VCC_SUB_2.0V";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			safe1_sreg: ESAFEOUT1 {
-				regulator-name = "SAFEOUT1";
-			};
-
-			safe2_sreg: ESAFEOUT2 {
-				regulator-name = "SAFEOUT2";
-				regulator-boot-on;
-			};
-
-			EN32KHZ_AP {
-				regulator-name = "EN32KHZ_AP";
-				regulator-always-on;
-			};
-
-			EN32KHZ_CP {
-				regulator-name = "EN32KHZ_CP";
-				regulator-always-on;
-			};
-
-			charger_reg: CHARGER {
-				regulator-name = "CHARGER";
-				regulator-min-microamp = <200000>;
-				regulator-max-microamp = <950000>;
-			};
-
-			chargercv_reg: CHARGER_CV {
-				regulator-name = "CHARGER_CV";
-				regulator-min-microvolt = <4200000>;
-				regulator-max-microvolt = <4200000>;
-				regulator-always-on;
-			};
-
-			CHARGER_TOPOFF {
-				regulator-name = "CHARGER_TOPOFF";
-				regulator-min-microamp = <200000>;
-				regulator-max-microamp = <200000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c_7 {
-	status = "okay";
-
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-
-	pinctrl-0 = <&i2c7_bus>;
-	pinctrl-names = "default";
-
-	magnetometer@c {
-		compatible = "asahi-kasei,ak8975";
-		reg = <0x0c>;
-
-		gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep0>;
-
-	sleep0: sleep-state {
-		gpa0-0-pin {
-			samsung,pins = "gpa0-0";
-			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
-			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
-		};
-
-		gpa0-1-pin {
-			samsung,pins = "gpa0-1";
-			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
-			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
-		};
-
-		gpa0-2-pin {
-			samsung,pins = "gpa0-2";
-			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
-			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
-		};
-
-		gpa0-3-pin {
-			samsung,pins = "gpa0-3";
-			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
-			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
-		};
-	};
-};
-
-&pinctrl_1 {
-	mhl_int: mhl-int-pins {
-		samsung,pins = "gpf3-5";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	i2c_mhl_bus: i2c-mhl-bus-pins {
-		samsung,pins = "gpf0-4", "gpf0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	usb_sel: usb-sel-pins {
-		samsung,pins = "gpl0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		samsung,pin-val = <0>;
-	};
-
-	bt_en: bt-en-pins {
-		samsung,pins = "gpl0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		samsung,pin-val = <0>;
-	};
-
-	bt_res: bt-res-pins {
-		samsung,pins = "gpl1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		samsung,pin-val = <0>;
-	};
-
-	otg_gp: otg-gp-pins {
-		samsung,pins = "gpx3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		samsung,pin-val = <0>;
-	};
-
-	mag_mhl_gpio: mag-mhl-pins {
-		samsung,pins = "gpd0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	max8997_irq: max8997-irq-pins {
-		samsung,pins = "gpx0-7";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	max17042_fuel_irq: max17042-fuel-irq-pins {
-		samsung,pins = "gpx2-3";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	tsp224_irq: tsp224-irq-pins {
-		samsung,pins = "gpx0-4";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sdhci_0 {
-	status = "okay";
-
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&vemmc_reg>;
-
-	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>;
-	pinctrl-names = "default";
-};
-
-&sdhci_2 {
-	status = "okay";
-
-	bus-width = <4>;
-	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&vtf_reg>;
-
-	pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>;
-	pinctrl-names = "default";
-};
-
-&sdhci_3 {
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	non-removable;
-	bus-width = <4>;
-	mmc-pwrseq = <&wlan_pwrseq>;
-	vmmc-supply = <&vtf_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
-		reg = <1>;
-
-		interrupt-parent = <&gpx2>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-	};
-};
-
-&serial_0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>;
-
-	bluetooth {
-		compatible = "brcm,bcm4330-bt";
-
-		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>;
-		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
-
-		interrupt-parent = <&gpx2>;
-		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-names = "host-wakeup";
-	};
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&tmu {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
deleted file mode 100644
index f1927ca15e080..0000000000000
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ /dev/null
@@ -1,372 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4210 based Origen board device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Device tree source file for Insignal's Origen board which is based on
- * Samsung's Exynos4210 SoC.
- */
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "exynos-mfc-reserved-memory.dtsi"
-
-/ {
-	model = "Insignal Origen evaluation board based on Exynos4210";
-	compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x10000000
-		       0x50000000 0x10000000
-		       0x60000000 0x10000000
-		       0x70000000 0x10000000>;
-	};
-
-	aliases {
-		mmc0 = &sdhci_0;
-		mmc1 = &sdhci_2;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
-		stdout-path = "serial2:115200n8";
-	};
-
-	mmc_reg: voltage-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-up {
-			label = "Up";
-			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_UP>;
-			wakeup-source;
-		};
-
-		key-down {
-			label = "Down";
-			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_DOWN>;
-			wakeup-source;
-		};
-
-		key-back {
-			label = "Back";
-			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			wakeup-source;
-		};
-
-		key-home {
-			label = "Home";
-			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			wakeup-source;
-		};
-
-		key-menu {
-			label = "Menu";
-			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-status {
-			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
-			function = LED_FUNCTION_HEARTBEAT;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-
-		pmic_ap_clk: pmic-ap-clk {
-			/* Workaround for missing clock on max8997 PMIC */
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing {
-			clock-frequency = <47500000>;
-			hactive = <1024>;
-			vactive = <600>;
-			hfront-porch = <64>;
-			hback-porch = <16>;
-			hsync-len = <48>;
-			vback-porch = <64>;
-			vfront-porch = <16>;
-			vsync-len = <3>;
-		};
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&buck1_reg>;
-};
-
-&cpu_thermal {
-	cooling-maps {
-		map0 {
-			/* Corresponds to 800MHz */
-			cooling-device = <&cpu0 2 2>;
-		};
-		map1 {
-			/* Corresponds to 200MHz */
-			cooling-device = <&cpu0 4 4>;
-		};
-	};
-};
-
-&exynos_usbphy {
-	status = "okay";
-};
-
-&fimd {
-	pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&buck3_reg>;
-	status = "okay";
-};
-
-&hsotg {
-	vusb_d-supply = <&ldo3_reg>;
-	vusb_a-supply = <&ldo8_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_0 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <20000>;
-	pinctrl-0 = <&i2c0_bus>;
-	pinctrl-names = "default";
-
-	pmic@66 {
-		compatible = "maxim,max8997-pmic";
-		reg = <0x66>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max8997_irq>;
-
-		max8997,pmic-buck1-dvs-voltage = <1350000>;
-		max8997,pmic-buck2-dvs-voltage = <1100000>;
-		max8997,pmic-buck5-dvs-voltage = <1200000>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ABB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_ALIVE_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VMIPI_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VDD_RTC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VMIPI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VDD_AUD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VADC_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "DVDD_SWB_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VDD_PLL_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VDD_AUD_3V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "AVDD18_SWB_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "VDD_SWB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "VDD_MIF_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_ARM_1.2V";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VDD_INT_1.1V";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VDD_G3D_1.1V";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1100000>;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VDDQ_M1M2_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "VDD_LCD_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			EN32KHZ_AP {
-				regulator-name = "EN32KHZ_AP";
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&pinctrl_1 {
-	max8997_irq: max8997-irq-pins {
-		samsung,pins = "gpx0-3", "gpx0-4";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-};
-
-&sdhci_0 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
-	pinctrl-names = "default";
-	vmmc-supply = <&mmc_reg>;
-	status = "okay";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-	pinctrl-names = "default";
-	vmmc-supply = <&mmc_reg>;
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&tmu {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
deleted file mode 100644
index 76f44ae0de469..0000000000000
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ /dev/null
@@ -1,863 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2011-2012 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- */
-
-#include "exynos-pinctrl.h"
-
-&pinctrl_0 {
-	gpa0: gpa0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe0: gpe0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe1: gpe1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe2: gpe2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe3: gpe3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe4: gpe4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf2: gpf2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf3: gpf3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data-pins {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart0_fctl: uart0-fctl-pins {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_data: uart1-data-pins {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_fctl: uart1-fctl-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c2_bus: i2c2-bus-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_data: uart2-data-pins {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_fctl: uart2-fctl-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart_audio_a: uart-audio-a-pins {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c3_bus: i2c3-bus-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart3_data: uart3-data-pins {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart_audio_b: uart-audio-b-pins {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi0_bus: spi0-bus-pins {
-		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c4_bus: i2c4-bus-pins {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi1_bus: spi1-bus-pins {
-		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c5_bus: i2c5-bus-pins {
-		samsung,pins = "gpb-6", "gpb-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s1_bus: i2s1-bus-pins {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm1_bus: pcm1-bus-pins {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	ac97_bus: ac97-bus-pins {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s2_bus: i2s2-bus-pins {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm2_bus: pcm2-bus-pins {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spdif_bus: spdif-bus-pins {
-		samsung,pins = "gpc1-0", "gpc1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c6_bus: i2c6-bus-pins {
-		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi2_bus: spi2-bus-pins {
-		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c7_bus: i2c7-bus-pins {
-		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c0_bus: i2c0-bus-pins {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c1_bus: i2c1-bus-pins {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm0_out: pwm0-out-pins {
-		samsung,pins = "gpd0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm1_out: pwm1-out-pins {
-		samsung,pins = "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm2_out: pwm2-out-pins {
-		samsung,pins = "gpd0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm3_out: pwm3-out-pins {
-		samsung,pins = "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_ctrl: lcd-ctrl-pins {
-		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_sync: lcd-sync-pins {
-		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_en: lcd-en-pins {
-		samsung,pins = "gpe3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_clk: lcd-clk-pins {
-		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data16: lcd-data-width16-pins {
-		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
-				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
-				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data18: lcd-data-width18-pins {
-		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
-				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
-				"gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data24: lcd-data-width24-pins {
-		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	gpj0: gpj0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj1: gpj1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk0: gpk0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk1: gpk1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk2: gpk2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk3: gpk3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl0: gpl0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl1: gpl1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl2: gpl2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpy0: gpy0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy1: gpy1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy2: gpy2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy3: gpy3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy4: gpy4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy5: gpy5-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy6: gpy6-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpx0: gpx0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx1: gpx1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx2: gpx2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk-pins {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cmd: sd0-cmd-pins {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cd: sd0-cd-pins {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus1: sd0-bus-width1-pins {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus4: sd0-bus-width4-pins {
-		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus8: sd0-bus-width8-pins {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_clk: sd4-clk-pins {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_cmd: sd4-cmd-pins {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_cd: sd4-cd-pins {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus1: sd4-bus-width1-pins {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus4: sd4-bus-width4-pins {
-		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus8: sd4-bus-width8-pins {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_clk: sd1-clk-pins {
-		samsung,pins = "gpk1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cmd: sd1-cmd-pins {
-		samsung,pins = "gpk1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cd: sd1-cd-pins {
-		samsung,pins = "gpk1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus1: sd1-bus-width1-pins {
-		samsung,pins = "gpk1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus4: sd1-bus-width4-pins {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_clk: sd2-clk-pins {
-		samsung,pins = "gpk2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cmd: sd2-cmd-pins {
-		samsung,pins = "gpk2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cd: sd2-cd-pins {
-		samsung,pins = "gpk2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus1: sd2-bus-width1-pins {
-		samsung,pins = "gpk2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus4: sd2-bus-width4-pins {
-		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus8: sd2-bus-width8-pins {
-		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_clk: sd3-clk-pins {
-		samsung,pins = "gpk3-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_cmd: sd3-cmd-pins {
-		samsung,pins = "gpk3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_cd: sd3-cd-pins {
-		samsung,pins = "gpk3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_bus1: sd3-bus-width1-pins {
-		samsung,pins = "gpk3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_bus4: sd3-bus-width4-pins {
-		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	eint0: ext-int0-pins {
-		samsung,pins = "gpx0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint8: ext-int8-pins {
-		samsung,pins = "gpx1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint15: ext-int15-pins {
-		samsung,pins = "gpx1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint16: ext-int16-pins {
-		samsung,pins = "gpx2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint31: ext-int31-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_a_io: cam-port-a-io-pins {
-		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_a_clk_active: cam-port-a-clk-active-pins {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	hdmi_cec: hdmi-cec-pins {
-		samsung,pins = "gpx3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_2 {
-	gpz: gpz-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	i2s0_bus: i2s0-bus-pins {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm0_bus: pcm0-bus-pins {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
deleted file mode 100644
index b566f878ed84f..0000000000000
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ /dev/null
@@ -1,229 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4210 based SMDKV310 board device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Device tree source file for Samsung's SMDKV310 board which is based on
- * Samsung's Exynos4210 SoC.
- */
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include "exynos-mfc-reserved-memory.dtsi"
-
-/ {
-	model = "Samsung smdkv310 evaluation board based on Exynos4210";
-	compatible = "samsung,smdkv310", "samsung,exynos4210", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		mmc0 = &sdhci_2;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
-		stdout-path = "serial1:115200n8";
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <12000000>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-
-		pmic_ap_clk: pmic-ap-clk {
-			/* Workaround for missing clock on PMIC */
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-};
-
-&cpu_thermal {
-	cooling-maps {
-		map0 {
-			/* Corresponds to 800MHz */
-			cooling-device = <&cpu0 2 2>;
-		};
-		map1 {
-			/* Corresponds to 200MHz */
-			cooling-device = <&cpu0 4 4>;
-		};
-	};
-};
-
-&i2c_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <100000>;
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "samsung,24ad0xd1";
-		reg = <0x50>;
-	};
-
-	eeprom@52 {
-		compatible = "samsung,24ad0xd1";
-		reg = <0x52>;
-	};
-};
-
-&keypad {
-	samsung,keypad-num-rows = <2>;
-	samsung,keypad-num-columns = <8>;
-	linux,keypad-no-autorepeat;
-	wakeup-source;
-	pinctrl-names = "default";
-	pinctrl-0 = <&keypad_rows &keypad_cols>;
-	status = "okay";
-
-	key-1 {
-		keypad,row = <0>;
-		keypad,column = <3>;
-		linux,code = <2>;
-	};
-
-	key-2 {
-		keypad,row = <0>;
-		keypad,column = <4>;
-		linux,code = <3>;
-	};
-
-	key-3 {
-		keypad,row = <0>;
-		keypad,column = <5>;
-		linux,code = <4>;
-	};
-
-	key-4 {
-		keypad,row = <0>;
-		keypad,column = <6>;
-		linux,code = <5>;
-	};
-
-	key-5 {
-		keypad,row = <0>;
-		keypad,column = <7>;
-		linux,code = <6>;
-	};
-
-	key-a {
-		keypad,row = <1>;
-		keypad,column = <3>;
-		linux,code = <30>;
-	};
-
-	key-b {
-		keypad,row = <1>;
-		keypad,column = <4>;
-		linux,code = <48>;
-	};
-
-	key-c {
-		keypad,row = <1>;
-		keypad,column = <5>;
-		linux,code = <46>;
-	};
-
-	key-d {
-		keypad,row = <1>;
-		keypad,column = <6>;
-		linux,code = <32>;
-	};
-
-	key-e {
-		keypad,row = <1>;
-		keypad,column = <7>;
-		linux,code = <18>;
-	};
-};
-
-&pinctrl_1 {
-	keypad_rows: keypad-rows-pins {
-		samsung,pins = "gpx2-0", "gpx2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	keypad_cols: keypad-cols-pins {
-		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
-			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&rtc {
-	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&spi_2 {
-	cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "winbond,w25x80", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-
-		controller-data {
-			samsung,spi-feedback-delay = <0>;
-		};
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "Kernel";
-			reg = <0x40000 0xc0000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
deleted file mode 100644
index ff6ee4b2c31b5..0000000000000
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ /dev/null
@@ -1,569 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4210 based Trats board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Trats board which is based on
- * Samsung's Exynos4210 SoC.
- */
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Samsung Trats based on Exynos4210";
-	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
-	chassis-type = "handset";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000
-			0x60000000 0x10000000
-			0x70000000 0x10000000>;
-	};
-
-	aliases {
-		mmc0 = &sdhci_0;
-		mmc1 = &sdhci_2;
-		mmc2 = &sdhci_3;
-	};
-
-	chosen {
-		bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
-		stdout-path = "serial2:115200n8";
-	};
-
-	vemmc_reg: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	tsp_reg: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "TSP_FIXED_VOLTAGES";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	cam_af_28v_reg: regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "8M_AF_2.8V_EN";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	cam_io_en_reg: regulator-3 {
-		compatible = "regulator-fixed";
-		regulator-name = "CAM_IO_EN";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	cam_io_12v_reg: regulator-4 {
-		compatible = "regulator-fixed";
-		regulator-name = "8M_1.2V_EN";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vt_core_15v_reg: regulator-5 {
-		compatible = "regulator-fixed";
-		regulator-name = "VT_CORE_1.5V";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		vol-down-key {
-			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <10>;
-		};
-
-		vol-up-key {
-			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <10>;
-		};
-
-		power-key {
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-
-		ok-key {
-			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			linux,code = <352>;
-			label = "ok";
-			debounce-interval = <10>;
-		};
-	};
-
-	wlan_pwrseq: sdhci3-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-
-		pmic_ap_clk: pmic-ap-clk {
-			/* Workaround for missing clock on max8997 PMIC */
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-};
-
-&camera {
-	pinctrl-names = "default";
-	pinctrl-0 = <>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&varm_breg>;
-};
-
-&cpu_thermal {
-	cooling-maps {
-		map0 {
-			/* Corresponds to 800MHz at freq_table */
-			cooling-device = <&cpu0 2 2>, <&cpu1 2 2>;
-		};
-		map1 {
-			/* Corresponds to 200MHz at freq_table */
-			cooling-device = <&cpu0 4 4>, <&cpu1 4 4>;
-		};
-	};
-};
-
-&dsi_0 {
-	vddcore-supply = <&vusb_reg>;
-	vddio-supply = <&vmipi_reg>;
-	samsung,burst-clock-frequency = <500000000>;
-	samsung,esc-clock-frequency = <20000000>;
-	samsung,pll-clock-frequency = <24000000>;
-	status = "okay";
-
-	panel@0 {
-		reg = <0>;
-		compatible = "samsung,s6e8aa0";
-		vdd3-supply = <&vcclcd_reg>;
-		vci-supply = <&vlcd_reg>;
-		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
-		power-on-delay = <50>;
-		reset-delay = <100>;
-		init-delay = <100>;
-		flip-horizontal;
-		flip-vertical;
-		panel-width-mm = <58>;
-		panel-height-mm = <103>;
-
-		display-timings {
-			timing-0 {
-				clock-frequency = <57153600>;
-				hactive = <720>;
-				vactive = <1280>;
-				hfront-porch = <5>;
-				hback-porch = <5>;
-				hsync-len = <5>;
-				vfront-porch = <13>;
-				vback-porch = <1>;
-				vsync-len = <2>;
-			};
-		};
-	};
-};
-
-&exynos_usbphy {
-	status = "okay";
-	vbus-supply = <&safe1_sreg>;
-};
-
-&fimc_0 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-			  <&clock CLK_SCLK_FIMC0>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_1 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-			  <&clock CLK_SCLK_FIMC1>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_2 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-			  <&clock CLK_SCLK_FIMC2>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-		assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_3 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-			  <&clock CLK_SCLK_FIMC3>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimd {
-	status = "okay";
-};
-
-&gpu {
-	status = "okay";
-};
-
-&hsotg {
-	vusb_d-supply = <&vusb_reg>;
-	vusb_a-supply = <&vusbdac_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_3 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c3_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	touchscreen@48 {
-		compatible = "melfas,mms114";
-		reg = <0x48>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-size-x = <720>;
-		touchscreen-size-y = <1280>;
-		avdd-supply = <&tsp_reg>;
-		vdd-supply = <&tsp_reg>;
-	};
-};
-
-&i2c_5 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c5_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	pmic@66 {
-		compatible = "maxim,max8997-pmic";
-
-		reg = <0x66>;
-		interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
-				      <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
-
-		max8997,pmic-buck1-uses-gpio-dvs;
-		max8997,pmic-buck2-uses-gpio-dvs;
-		max8997,pmic-buck5-uses-gpio-dvs;
-
-		max8997,pmic-ignore-gpiodvs-side-effect;
-		max8997,pmic-buck125-default-dvs-idx = <0>;
-
-		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
-						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
-						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
-
-		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
-						 <1250000>, <1200000>,
-						 <1150000>, <1100000>,
-						 <1000000>, <950000>;
-
-		max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
-						 <950000>,  <900000>,
-						 <1100000>, <1000000>,
-						 <950000>,  <900000>;
-
-		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>;
-
-		regulators {
-			valive_reg: LDO2 {
-				regulator-name = "VALIVE_1.1V_C210";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			vusb_reg: LDO3 {
-				regulator-name = "VUSB_1.1V_C210";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-			};
-
-			vmipi_reg: LDO4 {
-				regulator-name = "VMIPI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vpda_reg: LDO6 {
-				regulator-name = "VCC_1.8V_PDA";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vcam_reg: LDO7 {
-				regulator-name = "CAM_ISP_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vusbdac_reg: LDO8 {
-				regulator-name = "VUSB+VDAC_3.3V_C210";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vccpda_reg: LDO9 {
-				regulator-name = "VCC_2.8V_PDA";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			vpll_reg: LDO10 {
-				regulator-name = "VPLL_1.1V_C210";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			vtcam_reg: LDO12 {
-				regulator-name = "VT_CAM_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vcclcd_reg: LDO13 {
-				regulator-name = "VCC_3.3V_LCD";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vlcd_reg: LDO15 {
-				regulator-name = "VLCD_2.2V";
-				regulator-min-microvolt = <2200000>;
-				regulator-max-microvolt = <2200000>;
-			};
-
-			camsensor_reg: LDO16 {
-				regulator-name = "CAM_SENSOR_IO_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			tflash_reg: LDO17 {
-				regulator-name = "VTF_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			vddq_reg: LDO21 {
-				regulator-name = "VDDQ_M1M2_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			varm_breg: BUCK1 {
-				regulator-name = "VARM_1.2V_C210";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			vint_breg: BUCK2 {
-				regulator-name = "VINT_1.1V_C210";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			camisp_breg: BUCK4 {
-				regulator-name = "CAM_ISP_CORE_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			vmem_breg: BUCK5 {
-				regulator-name = "VMEM_1.2V_C210";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vccsub_breg: BUCK7 {
-				regulator-name = "VCC_SUB_2.0V";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			safe1_sreg: ESAFEOUT1 {
-				regulator-name = "SAFEOUT1";
-			};
-
-			safe2_sreg: ESAFEOUT2 {
-				regulator-name = "SAFEOUT2";
-				regulator-boot-on;
-			};
-
-			EN32KHZ_AP {
-				regulator-name = "EN32KHZ_AP";
-				regulator-always-on;
-			};
-
-			EN32KHZ_CP {
-				regulator-name = "EN32KHZ_CP";
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&pinctrl_1 {
-	bt_shutdown: bt-shutdown-pins {
-		samsung,pins = "gpl1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	bt_host_wakeup: bt-host-wakeup-pins {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	bt_device_wakeup: bt-device-wakeup-pins {
-		samsung,pins = "gpx3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sdhci_0 {
-	bus-width = <8>;
-	non-removable;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-	pinctrl-names = "default";
-	vmmc-supply = <&vemmc_reg>;
-	status = "okay";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-	pinctrl-names = "default";
-	vmmc-supply = <&tflash_reg>;
-	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sdhci_3 {
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	non-removable;
-	bus-width = <4>;
-	mmc-pwrseq = <&wlan_pwrseq>;
-	vmmc-supply = <&tflash_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
-		reg = <1>;
-
-		interrupt-parent = <&gpx2>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-	};
-};
-
-&serial_0 {
-	status = "okay";
-	pinctrl-0 = <&uart0_data &uart0_fctl>;
-	pinctrl-names = "default";
-
-	bluetooth {
-		compatible = "brcm,bcm4330-bt";
-		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
-		pinctrl-names = "default";
-		shutdown-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&tmu {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
deleted file mode 100644
index 8fe0d5d2be2d9..0000000000000
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ /dev/null
@@ -1,692 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4210 based Universal C210 board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Universal C210 board which is based on
- * Samsung's Exynos4210 rev0 SoC.
- */
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Samsung Universal C210 based on Exynos4210 rev0";
-	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
-	chassis-type = "handset";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000>;
-	};
-
-	aliases {
-		mmc0 = &sdhci_0;
-		mmc1 = &sdhci_2;
-		mmc2 = &sdhci_3;
-	};
-
-	chosen {
-		bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
-		stdout-path = "serial2:115200n8";
-	};
-
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-
-		pmic_ap_clk: pmic-ap-clk {
-			/* Workaround for missing clock on PMIC */
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	vemmc_reg: voltage-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2_8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	wlan_pwrseq: sdhci3-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpe3 1 GPIO_ACTIVE_LOW>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		vol-up-key {
-			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <1>;
-		};
-
-		vol-down-key {
-			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <1>;
-		};
-
-		config-key {
-			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <171>;
-			label = "config";
-			debounce-interval = <1>;
-			wakeup-source;
-		};
-
-		camera-key {
-			gpios = <&gpx2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <212>;
-			label = "camera";
-			debounce-interval = <1>;
-		};
-
-		power-key {
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <1>;
-			wakeup-source;
-		};
-
-		ok-key {
-			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			linux,code = <352>;
-			label = "ok";
-			debounce-interval = <1>;
-		};
-	};
-
-	tsp_reg: voltage-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "TSP_2_8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	spi-3 {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
-
-		lcd@0 {
-			compatible = "samsung,ld9040";
-			reg = <0>;
-			vdd3-supply = <&ldo7_reg>;
-			vci-supply = <&ldo17_reg>;
-			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
-			spi-max-frequency = <1200000>;
-			power-on-delay = <10>;
-			reset-delay = <10>;
-			panel-width-mm = <90>;
-			panel-height-mm = <154>;
-			display-timings {
-				timing {
-					clock-frequency = <23492370>;
-					hactive = <480>;
-					vactive = <800>;
-					hback-porch = <16>;
-					hfront-porch = <16>;
-					vback-porch = <2>;
-					vfront-porch = <28>;
-					hsync-len = <2>;
-					vsync-len = <1>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <0>;
-					pixelclk-active = <0>;
-				};
-			};
-			port {
-				lcd_ep: endpoint {
-					remote-endpoint = <&fimd_dpi_ep>;
-				};
-			};
-		};
-	};
-
-	hdmi_en: voltage-regulator-hdmi-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "HDMI_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	hdmi_ddc: i2c-ddc {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpe4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpe4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-0 = <&i2c_ddc_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-};
-
-&camera {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <>;
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_arm_reg>;
-};
-
-&cpu_thermal {
-	cooling-maps {
-		map0 {
-			/* Corresponds to 800MHz */
-			cooling-device = <&cpu0 2 2>;
-		};
-		map1 {
-			/* Corresponds to 200MHz */
-			cooling-device = <&cpu0 4 4>;
-		};
-	};
-};
-
-&ehci {
-	status = "okay";
-	phys = <&exynos_usbphy 1>;
-	phy-names = "host";
-};
-
-&exynos_usbphy {
-	status = "okay";
-	vbus-supply = <&safeout1_reg>;
-};
-
-&fimc_0 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-			  <&clock CLK_SCLK_FIMC0>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_1 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-			  <&clock CLK_SCLK_FIMC1>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_2 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-			  <&clock CLK_SCLK_FIMC2>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_3 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-			  <&clock CLK_SCLK_FIMC3>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimd {
-	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
-	pinctrl-names = "default";
-	status = "okay";
-	samsung,invert-vden;
-	samsung,invert-vclk;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	port@3 {
-		reg = <3>;
-		fimd_dpi_ep: endpoint {
-			remote-endpoint = <&lcd_ep>;
-		};
-	};
-};
-
-&gpu {
-	mali-supply = <&buck2_reg>;
-	status = "okay";
-};
-
-&hdmi {
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd>;
-	hdmi-en-supply = <&hdmi_en>;
-	vdd-supply = <&ldo3_reg>;
-	vdd_osc-supply = <&ldo4_reg>;
-	vdd_pll-supply = <&ldo3_reg>;
-	ddc = <&hdmi_ddc>;
-	status = "okay";
-};
-
-&hsotg {
-	vusb_d-supply = <&ldo3_reg>;
-	vusb_a-supply = <&ldo8_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_3 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c3_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	tsp@4a {
-		/* TBD: Atmel maXtouch touchscreen */
-		reg = <0x4a>;
-	};
-};
-
-&i2c_5 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c5_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	vdd_arm_reg: pmic@60 {
-		compatible = "maxim,max8952";
-		reg = <0x60>;
-
-		max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
-				    <&gpx0 4 GPIO_ACTIVE_HIGH>;
-		max8952,default-mode = <0>;
-		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-						<1050000>, <950000>;
-		max8952,sync-freq = <0>;
-		max8952,ramp-speed = <0>;
-
-		regulator-name = "VARM_1.2V_C210";
-		regulator-min-microvolt = <770000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	pmic@66 {
-		compatible = "national,lp3974";
-		interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&lp3974_irq>;
-		reg = <0x66>;
-
-		max8998,pmic-buck1-default-dvs-idx = <0>;
-		max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
-						<&gpx0 6 GPIO_ACTIVE_HIGH>;
-		max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
-						<1100000>, <1000000>;
-
-		max8998,pmic-buck2-default-dvs-idx = <0>;
-		max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
-		max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
-
-		regulators {
-			ldo2_reg: LDO2 {
-				regulator-name = "VALIVE_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VUSB+MIPI_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VADC_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VTF_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "LDO6";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VLCD+VMIPI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VUSB+VDAC_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "VCC_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VPLL_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "CAM_AF_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "PS_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VHIC_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "CAM_I_HOST_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "CAM_S_ANA_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "VCC_3.0V_LCD";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VINT_1.1V";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VG3D_1.1V";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VCC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VMEM_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ap32khz_reg: EN32KHz-AP {
-				regulator-name = "32KHz AP";
-				regulator-always-on;
-			};
-
-			cp32khz_reg: EN32KHz-CP {
-				regulator-name = "32KHz CP";
-			};
-
-			vichg_reg: ENVICHG {
-				regulator-name = "VICHG";
-			};
-
-			safeout1_reg: ESAFEOUT1 {
-				regulator-name = "SAFEOUT1";
-			};
-
-			safeout2_reg: ESAFEOUT2 {
-				regulator-name = "SAFEOUT2";
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&i2c_8 {
-	status = "okay";
-};
-
-&mct {
-	status = "disabled";
-};
-
-&mdma1 {
-	/* Use the secure mdma0 */
-	status = "disabled";
-};
-
-&mixer {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};
-
-&pinctrl_1 {
-	bt_shutdown: bt-shutdown-pins {
-		samsung,pins = "gpe1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	bt_host_wakeup: bt-host-wakeup-pins {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	bt_device_wakeup: bt-device-wakeup-pins {
-		samsung,pins = "gpx3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	lp3974_irq: lp3974-irq-pins {
-		samsung,pins = "gpx0-7", "gpx2-7";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	hdmi_hpd: hdmi-hpd-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-};
-
-&pinctrl_0 {
-	i2c_ddc_bus: i2c-ddc-bus-pins {
-		samsung,pins = "gpe4-2", "gpe4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pwm {
-	compatible = "samsung,s5p6440-pwm";
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sdhci_0 {
-	bus-width = <8>;
-	non-removable;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-	pinctrl-names = "default";
-	vmmc-supply = <&vemmc_reg>;
-	status = "okay";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-	pinctrl-names = "default";
-	vmmc-supply = <&ldo5_reg>;
-	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sdhci_3 {
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	non-removable;
-	bus-width = <4>;
-	mmc-pwrseq = <&wlan_pwrseq>;
-	vmmc-supply = <&ldo5_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
-		reg = <1>;
-		interrupt-parent = <&gpx2>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-	};
-};
-
-&serial_0 {
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	pinctrl-0 = <&uart0_data &uart0_fctl>;
-	pinctrl-names = "default";
-
-	bluetooth {
-		compatible = "brcm,bcm4330-bt";
-		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
-		pinctrl-names = "default";
-		shutdown-gpios = <&gpe1 4 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&serial_1 {
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-};
-
-&serial_2 {
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-};
-
-&serial_3 {
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-};
-
-&soc {
-	mdma0: dma-controller@12840000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x12840000 0x1000>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_MDMA>;
-		clock-names = "apb_pclk";
-		#dma-cells = <1>;
-		power-domains = <&pd_lcd0>;
-	};
-};
-
-&sysram {
-	smp-sram@0 {
-		status = "disabled";
-	};
-
-	smp-sram@5000 {
-		compatible = "samsung,exynos4210-sysram";
-		reg = <0x5000 0x1000>;
-	};
-
-	smp-sram@1f000 {
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
deleted file mode 100644
index 0e27c3375e2e9..0000000000000
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ /dev/null
@@ -1,531 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4210 SoC device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
- * based board files can include this file and provide values for board specific
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
- * nodes can be added to this file.
- */
-
-#include "exynos4.dtsi"
-#include "exynos4-cpu-thermal.dtsi"
-
-/ {
-	compatible = "samsung,exynos4210", "samsung,exynos4";
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-	};
-
-	bus_acp: bus-acp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_ACP>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_acp_opp_table>;
-		status = "disabled";
-
-		bus_acp_opp_table: opp-table {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-	};
-
-	bus_display: bus-display {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK160>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_display_opp_table>;
-		status = "disabled";
-
-		bus_display_opp_table: opp-table {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-		};
-	};
-
-	bus_dmc: bus-dmc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_DMC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_dmc_opp_table>;
-		status = "disabled";
-
-		bus_dmc_opp_table: opp-table {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <1025000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-				opp-microvolt = <1050000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <1150000>;
-				opp-suspend;
-			};
-		};
-	};
-
-	bus_fsys: bus-fsys {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK133>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_fsys_opp_table>;
-		status = "disabled";
-
-		bus_fsys_opp_table: opp-table {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-10000000 {
-				opp-hz = /bits/ 64 <10000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-	};
-
-	bus_lcd0: bus-lcd0 {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK200>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_leftbus: bus-leftbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_GDL>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mfc: bus-mfc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_SCLK_MFC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_peri: bus-peri {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK100>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_peri_opp_table>;
-		status = "disabled";
-
-		bus_peri_opp_table: opp-table {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-5000000 {
-				opp-hz = /bits/ 64 <5000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-	};
-
-	bus_rightbus: bus-rightbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_GDR>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-			};
-		};
-
-		cpu0: cpu@900 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x900>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			clock-latency = <160000>;
-
-			operating-points = <
-				1200000 1250000
-				1000000 1150000
-				800000	1075000
-				500000	975000
-				400000	975000
-				200000	950000
-			>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu1: cpu@901 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x901>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			clock-latency = <160000>;
-
-			operating-points = <
-				1200000 1250000
-				1000000 1150000
-				800000	1075000
-				500000	975000
-				400000	975000
-				200000	950000
-			>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	bus_leftbus_opp_table: opp-table-0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-suspend;
-		};
-	};
-
-	soc: soc {
-		sysram: sram@2020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x20000>;
-
-			smp-sram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sram@1f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x1f000 0x1000>;
-			};
-		};
-
-		pd_lcd1: power-domain@10023ca0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023ca0 0x20>;
-			#power-domain-cells = <0>;
-			label = "LCD1";
-		};
-
-		l2c: cache-controller@10502000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x10502000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			prefetch-data = <1>;
-			prefetch-instr = <1>;
-			arm,tag-latency = <2 2 1>;
-			arm,data-latency = <2 2 1>;
-		};
-
-		mct: timer@10050000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x10050000 0x800>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-			interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-					      <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-					      <&combiner 12 6>,
-					      <&combiner 12 7>,
-					      <&gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-					      <&gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		watchdog: watchdog@10060000 {
-			compatible = "samsung,s3c6410-wdt";
-			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_WDT>;
-			clock-names = "watchdog";
-		};
-
-		clock: clock-controller@10030000 {
-			compatible = "samsung,exynos4210-clock";
-			reg = <0x10030000 0x20000>;
-			#clock-cells = <1>;
-		};
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos4210-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_1: pinctrl@11000000 {
-			compatible = "samsung,exynos4210-pinctrl";
-			reg = <0x11000000 0x1000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakup_eint: wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_2: pinctrl@3860000 {
-			compatible = "samsung,exynos4210-pinctrl";
-			reg = <0x03860000 0x1000>;
-		};
-
-		g2d: g2d@12800000 {
-			compatible = "samsung,s5pv210-g2d";
-			reg = <0x12800000 0x1000>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-			clock-names = "sclk_fimg2d", "fimg2d";
-			power-domains = <&pd_lcd0>;
-			iommus = <&sysmmu_g2d>;
-		};
-
-		ppmu_acp: ppmu@10ae0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x10ae0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_lcd1: ppmu@12240000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x12240000 0x2000>;
-			clocks = <&clock CLK_PPMULCD1>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		sysmmu_g2d: sysmmu@12a20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12a20000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 7>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-			power-domains = <&pd_lcd0>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimd1: sysmmu@12220000 {
-			compatible = "samsung,exynos-sysmmu";
-			interrupt-parent = <&combiner>;
-			reg = <0x12220000 0x1000>;
-			interrupts = <5 3>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
-			power-domains = <&pd_lcd1>;
-			#iommu-cells = <0>;
-		};
-	};
-};
-
-&cpu_alert0 {
-	temperature = <85000>; /* millicelsius */
-};
-
-&cpu_alert1 {
-	temperature = <100000>; /* millicelsius */
-};
-
-&cpu_alert2 {
-	temperature = <110000>; /* millicelsius */
-};
-
-&cpu_thermal {
-	polling-delay-passive = <0>;
-	polling-delay = <0>;
-};
-
-&gic {
-	cpu-offset = <0x8000>;
-};
-
-&camera {
-	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-};
-
-&combiner {
-	samsung,combiner-nr = <16>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&fimc_0 {
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,cam-if;
-};
-
-&fimc_1 {
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,cam-if;
-};
-
-&fimc_2 {
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,lcd-wb;
-};
-
-&fimc_3 {
-	samsung,pix-limits = <1920 8192 1366 1920>;
-	samsung,rotators = <0>;
-	samsung,mainscaler-ext;
-	samsung,lcd-wb;
-};
-
-&gpu {
-	interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "gp",
-			  "gpmmu",
-			  "pp0",
-			  "ppmmu0",
-			  "pp1",
-			  "ppmmu1",
-			  "pp2",
-			  "ppmmu2",
-			  "pp3",
-			  "ppmmu3";
-	operating-points-v2 = <&gpu_opp_table>;
-
-	gpu_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-267000000 {
-			opp-hz = /bits/ 64 <267000000>;
-			opp-microvolt = <1050000>;
-		};
-	};
-};
-
-&mdma1 {
-	power-domains = <&pd_lcd0>;
-};
-
-&mixer {
-	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
-		      "sclk_mixer";
-	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
-		 <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
-};
-
-&pmu {
-	interrupts = <2 2>, <3 2>;
-	interrupt-affinity = <&cpu0>, <&cpu1>;
-	status = "okay";
-};
-
-&pmu_system_controller {
-	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-			"clkout4", "clkout8", "clkout9";
-	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
-	#clock-cells = <1>;
-};
-
-&rotator {
-	power-domains = <&pd_lcd0>;
-};
-
-&sysmmu_rotator {
-	power-domains = <&pd_lcd0>;
-};
-
-&tmu {
-	compatible = "samsung,exynos4210-tmu";
-	clocks = <&clock CLK_TMU_APBIF>;
-	clock-names = "tmu_apbif";
-};
-
-#include "exynos4210-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
deleted file mode 100644
index 94122e9c66255..0000000000000
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ /dev/null
@@ -1,216 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 based Galaxy S3 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include <dt-bindings/leds/common.h>
-#include "exynos4412-midas.dtsi"
-
-/ {
-	aliases {
-		i2c9 = &i2c_ak8975;
-		i2c10 = &i2c_cm36651;
-	};
-
-	led-controller {
-		compatible = "skyworks,aat1290";
-		flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
-		enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-names = "default", "host", "isp";
-		pinctrl-0 = <&camera_flash_host>;
-		pinctrl-1 = <&camera_flash_host>;
-		pinctrl-2 = <&camera_flash_isp>;
-
-		led {
-			function = LED_FUNCTION_FLASH;
-			color = <LED_COLOR_ID_WHITE>;
-			led-max-microamp = <520833>;
-			flash-max-microamp = <1012500>;
-			flash-max-timeout-us = <1940000>;
-		};
-	};
-
-	lcd_vdd3_reg: voltage-regulator-10 {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD_VDD_2.2V";
-		regulator-min-microvolt = <2200000>;
-		regulator-max-microvolt = <2200000>;
-		gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	ps_als_reg: voltage-regulator-11 {
-		compatible = "regulator-fixed";
-		regulator-name = "LED_A_3.0V";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	i2c_ak8975: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		magnetometer@c {
-			compatible = "asahi-kasei,ak8975";
-			reg = <0x0c>;
-			gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	i2c_cm36651: i2c-gpio-2 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		light-sensor@18 {
-			compatible = "capella,cm36651";
-			reg = <0x18>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-			vled-supply = <&ps_als_reg>;
-		};
-	};
-};
-
-&buck9_reg {
-	maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
-};
-
-&cam_af_reg {
-	gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&cam_io_reg {
-	gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&dsi_0 {
-	status = "okay";
-
-	panel@0 {
-		compatible = "samsung,s6e8aa0";
-		reg = <0>;
-		vdd3-supply = <&lcd_vdd3_reg>;
-		vci-supply = <&ldo25_reg>;
-		reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
-		power-on-delay = <50>;
-		reset-delay = <100>;
-		init-delay = <100>;
-		flip-horizontal;
-		flip-vertical;
-		panel-width-mm = <58>;
-		panel-height-mm = <103>;
-
-		display-timings {
-			timing-0 {
-				clock-frequency = <57153600>;
-				hactive = <720>;
-				vactive = <1280>;
-				hfront-porch = <5>;
-				hback-porch = <5>;
-				hsync-len = <5>;
-				vfront-porch = <13>;
-				vback-porch = <1>;
-				vsync-len = <2>;
-			};
-		};
-	};
-};
-
-&i2c_3 {
-	touchscreen@48 {
-		compatible = "melfas,mms114";
-		reg = <0x48>;
-		interrupt-parent = <&gpm2>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-size-x = <720>;
-		touchscreen-size-y = <1280>;
-		avdd-supply = <&ldo23_reg>;
-		vdd-supply = <&ldo24_reg>;
-	};
-};
-
-&ldo25_reg {
-	regulator-name = "LCD_VCC_3.3V";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&pinctrl_0 {
-	camera_flash_host: camera-flash-host-pins {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-val = <0>;
-	};
-
-	camera_flash_isp: camera-flash-isp-pins {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-val = <1>;
-	};
-};
-
-&s5c73m3 {
-	standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
-	vdda-supply = <&ldo17_reg>;
-	status = "okay";
-};
-
-&sound {
-	samsung,audio-routing =
-		"HP", "HPOUT1L",
-		"HP", "HPOUT1R",
-
-		"SPK", "SPKOUTLN",
-		"SPK", "SPKOUTLP",
-		"SPK", "SPKOUTRN",
-		"SPK", "SPKOUTRP",
-
-		"RCV", "HPOUT2N",
-		"RCV", "HPOUT2P",
-
-		"HDMI", "LINEOUT1N",
-		"HDMI", "LINEOUT1P",
-
-		"LINE", "LINEOUT2N",
-		"LINE", "LINEOUT2P",
-
-		"IN1LP", "MICBIAS1",
-		"IN1LN", "MICBIAS1",
-		"Main Mic", "MICBIAS1",
-
-		"IN1RP", "Sub Mic",
-		"IN1RN", "Sub Mic",
-
-		"IN2LP:VXRN", "MICBIAS2",
-		"Headset Mic", "MICBIAS2",
-
-		"IN2RN", "FM In",
-		"IN2RP:VXRP", "FM In";
-};
-
-&submic_bias_reg {
-	gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>;
-	enable-active-high;
-};
-
-&touchkey_reg {
-	gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts
deleted file mode 100644
index 61aca5798f388..0000000000000
--- a/arch/arm/boot/dts/exynos4412-i9300.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 based M0 (GT-I9300) board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos4412-galaxy-s3.dtsi"
-
-/ {
-	model = "Samsung Galaxy S3 (GT-I9300) based on Exynos4412";
-	compatible = "samsung,i9300", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
-	chassis-type = "handset";
-
-	/* bootargs are passed in by bootloader */
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-};
-
-&sound {
-	fm-sel-gpios = <&gpl0 3 GPIO_ACTIVE_HIGH>;
-};
diff --git a/arch/arm/boot/dts/exynos4412-i9305.dts b/arch/arm/boot/dts/exynos4412-i9305.dts
deleted file mode 100644
index 77083f1a82731..0000000000000
--- a/arch/arm/boot/dts/exynos4412-i9305.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "exynos4412-galaxy-s3.dtsi"
-
-/ {
-	model = "Samsung Galaxy S3 (GT-I9305) based on Exynos4412";
-	compatible = "samsung,i9305", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
-	chassis-type = "handset";
-
-	/* bootargs are passed in by bootloader */
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-};
-
-&i2c0_bus {
-	/* SCL and SDA pins are swapped */
-	samsung,pins = "gpd1-1", "gpd1-0";
-};
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
deleted file mode 100644
index ded232b04e0de..0000000000000
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * TOPEET's Exynos4412 based itop board device tree source
- *
- * Copyright (c) 2016 SUMOMO Computer Association
- *			https://www.sumomo.mobi
- *			Randy Li <ayaka@soulik.info>
- *
- * Device tree source file for TOPEET iTop Exynos 4412 core board
- * which is based on Samsung's Exynos4412 SoC.
- */
-
-/dts-v1/;
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/sound/samsung-i2s.h>
-#include "exynos4412-itop-scp-core.dtsi"
-
-/ {
-	model = "TOPEET iTop 4412 Elite board based on Exynos4412";
-	compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		mmc1 = &sdhci_2;
-	};
-
-	chosen {
-		bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait";
-		stdout-path = "serial2:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led2 {
-			function = LED_FUNCTION_HEARTBEAT;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led3 {
-			label = "red:user";
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-home {
-			label = "GPIO Key Home";
-			linux,code = <KEY_HOME>;
-			gpios = <&gpx1 1 GPIO_ACTIVE_LOW>;
-		};
-
-		key-back {
-			label = "GPIO Key Back";
-			linux,code = <KEY_BACK>;
-			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		key-sleep {
-			label = "GPIO Key Sleep";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
-		};
-
-		key-vol-up {
-			label = "GPIO Key Vol+";
-			linux,code = <KEY_UP>;
-			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
-		};
-
-		key-vol-down {
-			label = "GPIO Key Vol-";
-			linux,code = <KEY_DOWN>;
-			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "wm-sound";
-
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&link0_codec>;
-		simple-audio-card,frame-master = <&link0_codec>;
-
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Line", "Line In",
-			"Line", "Line Out",
-			"Speaker", "Speaker",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Headphone Jack", "HP_L",
-			"Headphone Jack", "HP_R",
-			"Speaker", "SPK_LP",
-			"Speaker", "SPK_LN",
-			"Speaker", "SPK_RP",
-			"Speaker", "SPK_RN",
-			"LINPUT1", "Mic Jack",
-			"LINPUT3", "Mic Jack",
-			"RINPUT1", "Mic Jack",
-			"RINPUT2", "Mic Jack";
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s0 0>;
-		};
-
-		link0_codec: simple-audio-card,codec {
-			sound-dai = <&codec>;
-			clocks = <&i2s0 CLK_I2S_CDCLK>;
-			system-clock-frequency = <11289600>;
-		};
-	};
-
-	beep {
-		compatible = "pwm-beeper";
-		pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>;
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo3_reg>;
-	status = "okay";
-};
-
-&camera {
-	pinctrl-0 = <&cam_port_a_clk_active>;
-	pinctrl-names = "default";
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_CAM0>;
-	assigned-clock-parents = <&clock CLK_XUSBXTI>;
-};
-
-&clock_audss {
-	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
-			<&clock_audss EXYNOS_MOUT_I2S>,
-			<&clock_audss EXYNOS_DOUT_SRP>,
-			<&clock_audss EXYNOS_DOUT_AUD_BUS>;
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
-			<&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-rates = <0>, <0>, <112896000>, <11289600>;
-};
-
-&ehci {
-	status = "okay";
-	/* In order to reset USB ethernet */
-	samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
-
-	phys = <&exynos_usbphy 1>, <&exynos_usbphy 3>;
-	phy-names = "host", "hsic1";
-};
-
-&exynos_usbphy {
-	status = "okay";
-};
-
-&fimc_0 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-			<&clock CLK_SCLK_FIMC0>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&hsotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_4 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c4_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	codec: audio-codec@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-		clocks = <&pmu_system_controller 0>;
-		clock-names = "mclk";
-		wlf,shared-lrclk;
-		#sound-dai-cells = <0>;
-	};
-};
-
-&i2s0 {
-	pinctrl-0 = <&i2s0_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&pinctrl_1 {
-	ether-reset-pins {
-		samsung,pins = "gpc0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pwm {
-	status = "okay";
-	pinctrl-0 = <&pwm0_out>;
-	pinctrl-names = "default";
-	samsung,pwm-outputs = <0>;
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-	pinctrl-names = "default";
-	cd-gpios = <&gpx0 7 GPIO_ACTIVE_LOW>;
-	cap-sd-highspeed;
-	vmmc-supply = <&ldo23_reg>;
-	vqmmc-supply = <&ldo17_reg>;
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
deleted file mode 100644
index 7bc6968af9c33..0000000000000
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ /dev/null
@@ -1,509 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * TOPEET's Exynos4412 based itop board device tree source
- *
- * Copyright (c) 2016 SUMOMO Computer Association
- *			https://www.sumomo.mobi
- *			Randy Li <ayaka@soulik.info>
- *
- * Device tree source file for TOPEET iTop Exynos 4412 SCP package core
- * board which is based on Samsung's Exynos4412 SoC.
- */
-
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "exynos4412.dtsi"
-#include "exynos4412-ppmu-common.dtsi"
-#include "exynos-mfc-reserved-memory.dtsi"
-
-/ {
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	aliases {
-		mmc0 = &mshc_0;
-	};
-
-	firmware@203f000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0203f000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
-						      <&cpu2 7 7>, <&cpu3 7 7>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 13 13>,
-						      <&cpu1 13 13>,
-						      <&cpu2 13 13>,
-						      <&cpu3 13 13>;
-			       };
-		       };
-		};
-	};
-
-	usb-hub {
-		compatible = "smsc,usb3503a";
-		reset-gpios = <&gpm2 4 GPIO_ACTIVE_LOW>;
-		connect-gpios = <&gpm3 3 GPIO_ACTIVE_HIGH>;
-		intn-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hsic_reset>;
-	};
-};
-
-&bus_dmc {
-	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
-	vdd-supply = <&buck1_reg>;
-	status = "okay";
-};
-
-&bus_acp {
-	devfreq = <&bus_dmc>;
-	status = "okay";
-};
-
-&bus_c2c {
-	devfreq = <&bus_dmc>;
-	status = "okay";
-};
-
-&bus_leftbus {
-	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
-	vdd-supply = <&buck3_reg>;
-	status = "okay";
-};
-
-&bus_rightbus {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_fsys {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_peri {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_mfc {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&gpu {
-	mali-supply = <&buck4_reg>;
-	status = "okay";
-};
-
-&hsotg {
-	vusb_d-supply = <&ldo15_reg>;
-	vusb_a-supply = <&ldo12_reg>;
-};
-
-&i2c_1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c1_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	s5m8767: pmic@66 {
-		compatible = "samsung,s5m8767-pmic";
-		reg = <0x66>;
-
-		s5m8767,pmic-buck-default-dvs-idx = <3>;
-
-		s5m8767,pmic-buck-dvs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>,
-						 <&gpb 6 GPIO_ACTIVE_HIGH>,
-						 <&gpb 7 GPIO_ACTIVE_HIGH>;
-
-		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
-						<&gpm3 6 GPIO_ACTIVE_HIGH>,
-						<&gpm3 7 GPIO_ACTIVE_HIGH>;
-
-		/* VDD_ARM */
-		s5m8767,pmic-buck2-dvs-voltage = <1356250>, <1300000>,
-						 <1243750>, <1118750>,
-						 <1068750>, <1012500>,
-						 <956250>, <900000>;
-		/* VDD_INT */
-		s5m8767,pmic-buck3-dvs-voltage = <1000000>, <1000000>,
-						 <925000>, <925000>,
-						 <887500>, <887500>,
-						 <850000>, <850000>;
-		/* VDD_G3D */
-		s5m8767,pmic-buck4-dvs-voltage = <1081250>, <1081250>,
-						 <1025000>, <950000>,
-						 <918750>, <900000>,
-						 <875000>, <831250>;
-		wakeup-source;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ALIVE";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			/* SCP uses 1.5v, POP uses 1.2v */
-			ldo2_reg: LDO2 {
-				regulator-name = "VDDQ_M12";
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VDDIOAP_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VDDQ_PRE";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VDD_LDO5";
-				op_mode = <0>; /* Always off Mode */
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VDD10_MPLL";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VDD10_XPLL";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VDD10_MIPI";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "VDD33_LCD";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VDD18_MIPI";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VDD18_ABB1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "VDD33_UOTG";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VDDIOPERI_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VDD18_ABB02";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VDD10_USH";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VDD18_HSIC";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "VDDIOAP_MMC012_28";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			/* Used by HSIC */
-			ldo18_reg: LDO18 {
-				regulator-name = "VDDIOPERI_28";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "VDD_LDO19";
-				op_mode = <0>; /* Always off Mode */
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "VDD28_CAM";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "VDD28_AF";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "VDDA28_2M";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "VDD28_TF";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "VDD33_A31";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "VDD18_CAM";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "VDD18_A31";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo27_reg: LDO27 {
-				regulator-name = "GPS_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo28_reg: LDO28 {
-				regulator-name = "DVDD12";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1456250>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <875000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "vdd_m12";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "vdd12_5m";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "pvdd_buck7";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-boot-on;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "pvdd_buck8";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "vddf28_emmc";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3000000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-		};
-
-		s5m8767_osc: clocks {
-			compatible = "samsung,s5m8767-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s5m8767_ap",
-					"s5m8767_cp", "s5m8767_bt";
-		};
-
-	};
-};
-
-&mfc {
-	status = "okay";
-};
-
-&mshc_0 {
-	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-	pinctrl-names = "default";
-	status = "okay";
-	vmmc-supply = <&buck9_reg>;
-	broken-cd;
-	card-detect-delay = <200>;
-	mmc-ddr-1_8v;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&pinctrl_1 {
-	hsic_reset: hsic-reset-pins {
-		samsung,pins = "gpm2-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&tmu {
-	vtmu-supply = <&ldo16_reg>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
deleted file mode 100644
index e6b949c1a00f2..0000000000000
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ /dev/null
@@ -1,1459 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 based Trats 2 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Trats 2 board which is based on
- * Samsung's Exynos4412 SoC.
- */
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-#include "exynos4412-ppmu-common.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/maxim,max77686.h>
-#include "exynos-pinctrl.h"
-
-/ {
-	compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		i2c11 = &i2c_max77693;
-		i2c12 = &i2c_max77693_fuel;
-		mmc0 = &mshc_0;
-		mmc2 = &sdhci_2;
-		mmc3 = &sdhci_3;
-	};
-
-	chosen {
-		stdout-path = &serial_2;
-	};
-
-	firmware@204f000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0204f000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	cam_io_reg: voltage-regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "CAM_SENSOR_A";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		enable-active-high;
-		status = "disabled";
-	};
-
-	cam_af_reg: voltage-regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "CAM_AF";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		enable-active-high;
-		status = "disabled";
-	};
-
-	vsil12: voltage-regulator-3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VSIL_1.2V";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&buck7_reg>;
-	};
-
-	vcc33mhl: voltage-regulator-4 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3.3_MHL";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vcc18mhl: voltage-regulator-5 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_1.8_MHL";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	touchkey_reg: voltage-regulator-6 {
-		compatible = "regulator-fixed";
-		regulator-name = "LED_VDD_3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		status = "disabled";
-	};
-
-	vbatt_reg: voltage-regulator-7 {
-		compatible = "regulator-fixed";
-		regulator-name = "VBATT";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	mic_bias_reg: voltage-regulator-8 {
-		compatible = "regulator-fixed";
-		regulator-name = "MICBIAS_LDO_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	submic_bias_reg: voltage-regulator-9 {
-		compatible = "regulator-fixed";
-		regulator-name = "SUB_MICBIAS_LDO_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys>;
-
-		key-down {
-			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <10>;
-		};
-
-		key-up {
-			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <10>;
-		};
-
-		key-power {
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-
-		key-ok {
-			gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <139>;
-			label = "ok";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	i2c_max77693: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmic@66 {
-			compatible = "maxim,max77693";
-			interrupt-parent = <&gpx1>;
-			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&max77693_irq>;
-			reg = <0x66>;
-
-			regulators {
-				esafeout1_reg: ESAFEOUT1 {
-					regulator-name = "ESAFEOUT1";
-				};
-				esafeout2_reg: ESAFEOUT2 {
-					regulator-name = "ESAFEOUT2";
-				};
-				charger_reg: CHARGER {
-					regulator-name = "CHARGER";
-					regulator-min-microamp = <60000>;
-					regulator-max-microamp = <2580000>;
-				};
-			};
-
-			motor-driver {
-				compatible = "maxim,max77693-haptic";
-				haptic-supply = <&ldo26_reg>;
-				pwms = <&pwm 0 38022 0>;
-			};
-
-			charger {
-				compatible = "maxim,max77693-charger";
-
-				maxim,constant-microvolt = <4350000>;
-				maxim,min-system-microvolt = <3600000>;
-				maxim,thermal-regulation-celsius = <100>;
-				maxim,battery-overcurrent-microamp = <3500000>;
-				maxim,charge-input-threshold-microvolt = <4300000>;
-			};
-		};
-	};
-
-	i2c_max77693_fuel: i2c-gpio-3 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fuel-gauge@36 {
-			compatible = "maxim,max17047";
-			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&max77693_fuel_irq>;
-			reg = <0x36>;
-
-			maxim,over-heat-temp = <700>;
-			maxim,over-volt = <4500>;
-		};
-	};
-
-	i2c-gpio-4 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		touchkey@20 {
-			compatible = "cypress,midas-touchkey";
-			reg = <0x20>;
-			vdd-supply = <&touchkey_reg>;
-			vcc-supply = <&ldo5_reg>;
-			interrupt-parent = <&gpj0>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-			linux,keycodes = <KEY_BACK KEY_MENU>;
-		};
-	};
-
-	i2c-mhl {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-0 = <&i2c_mhl_bus>;
-		pinctrl-names = "default";
-
-		sii9234: hdmi-bridge@39 {
-			compatible = "sil,sii9234";
-			avcc33-supply = <&vcc33mhl>;
-			iovcc18-supply = <&vcc18mhl>;
-			avcc12-supply = <&vsil12>;
-			cvcc12-supply = <&vsil12>;
-			reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
-			interrupt-parent = <&gpf3>;
-			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x39>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					mhl_to_hdmi: endpoint {
-						remote-endpoint = <&hdmi_to_mhl>;
-					};
-				};
-			};
-		};
-	};
-
-	wlan_pwrseq: sdhci3-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
-		clocks = <&max77686 MAX77686_CLK_PMIC>;
-		clock-names = "ext_clock";
-	};
-
-	sound: sound {
-		compatible = "samsung,midas-audio";
-		model = "Midas";
-		mic-bias-supply = <&mic_bias_reg>;
-		submic-bias-supply = <&submic_bias_reg>;
-
-		cpu {
-			sound-dai = <&i2s0 0>;
-		};
-		codec {
-			sound-dai = <&wm1811>;
-		};
-	};
-
-	thermistor-ap {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
-		pullup-ohm = <100000>;	 /* 100K */
-		pulldown-ohm = <100000>; /* 100K */
-		io-channels = <&adc 1>;  /* AP temperature */
-	};
-
-	thermistor-battery {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
-		pullup-ohm = <100000>;	 /* 100K */
-		pulldown-ohm = <100000>; /* 100K */
-		io-channels = <&adc 2>;  /* Battery temperature */
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo3_reg>;
-	status = "okay";
-};
-
-&bus_dmc {
-	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
-	vdd-supply = <&buck1_reg>;
-	status = "okay";
-};
-
-&bus_acp {
-	devfreq = <&bus_dmc>;
-	status = "okay";
-};
-
-&bus_c2c {
-	devfreq = <&bus_dmc>;
-	status = "okay";
-};
-
-&bus_leftbus {
-	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
-	vdd-supply = <&buck3_reg>;
-	status = "okay";
-};
-
-&bus_rightbus {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_display {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_fsys {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_peri {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_mfc {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&camera {
-	pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
-	pinctrl-names = "default";
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_CAM0>,
-		<&clock CLK_MOUT_CAM1>;
-	assigned-clock-parents = <&clock CLK_XUSBXTI>,
-		<&clock CLK_XUSBXTI>;
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&cpu_thermal {
-	cooling-maps {
-		map0 {
-			/* Corresponds to 800MHz at freq_table */
-			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
-					 <&cpu2 7 7>, <&cpu3 7 7>;
-		};
-		map1 {
-			/* Corresponds to 200MHz at freq_table */
-			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
-					 <&cpu2 13 13>, <&cpu3 13 13>;
-		};
-	};
-};
-
-&csis_0 {
-	status = "okay";
-	vddcore-supply = <&ldo8_reg>;
-	vddio-supply = <&ldo10_reg>;
-	assigned-clocks = <&clock CLK_MOUT_CSIS0>,
-			<&clock CLK_SCLK_CSIS0>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-
-	/* Camera C (3) MIPI CSI-2 (CSIS0) */
-	port@3 {
-		reg = <3>;
-		csis0_ep: endpoint {
-			remote-endpoint = <&s5c73m3_ep>;
-			data-lanes = <1 2 3 4>;
-			samsung,csis-hs-settle = <12>;
-		};
-	};
-};
-
-&csis_1 {
-	status = "okay";
-	vddcore-supply = <&ldo8_reg>;
-	vddio-supply = <&ldo10_reg>;
-	assigned-clocks = <&clock CLK_MOUT_CSIS1>,
-			<&clock CLK_SCLK_CSIS1>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-
-	/* Camera D (4) MIPI CSI-2 (CSIS1) */
-	port@4 {
-		reg = <4>;
-		csis1_ep: endpoint {
-			remote-endpoint = <&is_s5k6a3_ep>;
-			data-lanes = <1>;
-			samsung,csis-hs-settle = <18>;
-			samsung,csis-wclk;
-		};
-	};
-};
-
-&dsi_0 {
-	vddcore-supply = <&ldo8_reg>;
-	vddio-supply = <&ldo10_reg>;
-	samsung,burst-clock-frequency = <500000000>;
-	samsung,esc-clock-frequency = <20000000>;
-	samsung,pll-clock-frequency = <24000000>;
-};
-
-&exynos_usbphy {
-	vbus-supply = <&esafeout1_reg>;
-	status = "okay";
-};
-
-&fimc_0 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-			<&clock CLK_SCLK_FIMC0>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_1 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-			<&clock CLK_SCLK_FIMC1>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_2 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-			<&clock CLK_SCLK_FIMC2>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_3 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-			<&clock CLK_SCLK_FIMC3>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_is {
-	pinctrl-0 = <&fimc_is_uart>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&fimc_lite_0 {
-	status = "okay";
-};
-
-&fimc_lite_1 {
-	status = "okay";
-};
-
-&fimd {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&buck4_reg>;
-	status = "okay";
-};
-
-&hdmi {
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd>;
-	vdd-supply = <&ldo3_reg>;
-	vdd_osc-supply = <&ldo4_reg>;
-	vdd_pll-supply = <&ldo3_reg>;
-	ddc = <&i2c_5>;
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-			hdmi_to_mhl: endpoint {
-				remote-endpoint = <&mhl_to_hdmi>;
-			};
-		};
-	};
-};
-
-&hsotg {
-	vusb_d-supply = <&ldo15_reg>;
-	vusb_a-supply = <&ldo12_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_0 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c0_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	s5c73m3: image-sensor@3c {
-		compatible = "samsung,s5c73m3";
-		reg = <0x3c>;
-		xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
-		vdd-int-supply = <&buck9_reg>;
-		vddio-cis-supply = <&ldo9_reg>;
-		vddio-host-supply = <&ldo18_reg>;
-		vdd-af-supply = <&cam_af_reg>;
-		vdd-reg-supply = <&cam_io_reg>;
-		clock-frequency = <24000000>;
-		/* CAM_A_CLKOUT */
-		clocks = <&camera 0>;
-		clock-names = "cis_extclk";
-		status = "disabled";
-		port {
-			s5c73m3_ep: endpoint {
-				remote-endpoint = <&csis0_ep>;
-				data-lanes = <1 2 3 4>;
-			};
-		};
-	};
-};
-
-&i2c1_isp {
-	pinctrl-0 = <&fimc_is_i2c1>;
-	pinctrl-names = "default";
-
-	image-sensor@10 {
-		compatible = "samsung,s5k6a3";
-		reg = <0x10>;
-		svdda-supply = <&cam_io_reg>;
-		svddio-supply = <&ldo19_reg>;
-		afvdd-supply = <&ldo19_reg>;
-		clock-frequency = <24000000>;
-		/* CAM_B_CLKOUT */
-		clocks = <&camera 1>;
-		clock-names = "extclk";
-		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
-
-		port {
-			is_s5k6a3_ep: endpoint {
-				remote-endpoint = <&csis1_ep>;
-				data-lanes = <1>;
-			};
-		};
-	};
-};
-
-&i2c_3 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c3_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2c_4 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c4_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	wm1811: audio-codec@1a {
-		compatible = "wlf,wm1811";
-		reg = <0x1a>;
-		clocks = <&pmu_system_controller 0>,
-			<&max77686 MAX77686_CLK_PMIC>;
-		clock-names = "MCLK1", "MCLK2";
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-		#sound-dai-cells = <0>;
-
-		wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
-			0x0 0x8000 0x0 0x0 0x0>;
-		wlf,micbias-cfg = <0x2f 0x2b>;
-
-		wlf,lineout1-feedback;
-		wlf,lineout1-se;
-		wlf,lineout2-se;
-		wlf,ldoena-always-driven;
-
-		AVDD2-supply = <&vbatt_reg>;
-		DBVDD1-supply = <&ldo3_reg>;
-		DBVDD2-supply = <&vbatt_reg>;
-		DBVDD3-supply = <&vbatt_reg>;
-		DCVDD-supply = <&ldo3_reg>;
-		CPVDD-supply = <&vbatt_reg>;
-		SPKVDD1-supply = <&vbatt_reg>;
-		SPKVDD2-supply = <&vbatt_reg>;
-		wlf,ldo1ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
-		wlf,ldo2ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&i2c_5 {
-	status = "okay";
-};
-
-&i2c_7 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c7_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	max77686: pmic@9 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&max77686_irq>;
-		pinctrl-names = "default";
-		wakeup-source;
-		reg = <0x09>;
-		#clock-cells = <1>;
-
-		voltage-regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VALIVE_1.0V_AP";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VM1M2_1.2V_AP";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VCC_1.8V_AP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VCC_2.8V_AP";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VCC_1.8V_IO";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VMPLL_1.0V_AP";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VPLL_1.0V_AP";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VMIPI_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "CAM_ISP_MIPI_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VMIPI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VABB1_1.95V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "VUOTG_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "NFC_AVDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VABB2_1.95V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VHSIC_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VHSIC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "CAM_SENSOR_CORE_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "CAM_ISP_SEN_IO_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "VT_CAM_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "VDDQ_PRE_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "VTF_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "VMEM_VDD_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "TSP_AVDD_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "TSP_VDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "LDO25";
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "MOTOR_VCC_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_MIF";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VDD_ARM";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VDD_INT";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VDD_G3D";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VMEM_1.2V_AP";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "VCC_SUB_1.35V";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "VCC_SUB_2.0V";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "VMEM_VDDF_3.0V";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "CAM_ISP_CORE_1.2V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1200000>;
-			};
-		};
-	};
-};
-
-&i2c_8 {
-	status = "okay";
-};
-
-&i2s0 {
-	pinctrl-0 = <&i2s0_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&mixer {
-	status = "okay";
-};
-
-&mshc_0 {
-	broken-cd;
-	non-removable;
-	card-detect-delay = <200>;
-	vmmc-supply = <&ldo22_reg>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <0>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	mmc-ddr-1_8v;
-	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-	pinctrl-names = "default";
-	status = "okay";
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&pmu_system_controller {
-	assigned-clocks = <&pmu_system_controller 0>;
-	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
-};
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep0>;
-
-	mhl_int: mhl-int-pins {
-		samsung,pins = "gpf3-5";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	i2c_mhl_bus: i2c-mhl-bus-pins {
-		samsung,pins = "gpf0-4", "gpf0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	sleep0: sleep-state {
-		PIN_SLP(gpa0-0, INPUT, NONE);
-		PIN_SLP(gpa0-1, OUT0, NONE);
-		PIN_SLP(gpa0-2, INPUT, NONE);
-		PIN_SLP(gpa0-3, INPUT, UP);
-		PIN_SLP(gpa0-4, INPUT, NONE);
-		PIN_SLP(gpa0-5, INPUT, DOWN);
-		PIN_SLP(gpa0-6, INPUT, DOWN);
-		PIN_SLP(gpa0-7, INPUT, UP);
-
-		PIN_SLP(gpa1-0, INPUT, DOWN);
-		PIN_SLP(gpa1-1, INPUT, DOWN);
-		PIN_SLP(gpa1-2, INPUT, DOWN);
-		PIN_SLP(gpa1-3, INPUT, DOWN);
-		PIN_SLP(gpa1-4, INPUT, DOWN);
-		PIN_SLP(gpa1-5, INPUT, DOWN);
-
-		PIN_SLP(gpb-0, INPUT, NONE);
-		PIN_SLP(gpb-1, INPUT, NONE);
-		PIN_SLP(gpb-2, INPUT, NONE);
-		PIN_SLP(gpb-3, INPUT, NONE);
-		PIN_SLP(gpb-4, INPUT, DOWN);
-		PIN_SLP(gpb-5, INPUT, UP);
-		PIN_SLP(gpb-6, INPUT, DOWN);
-		PIN_SLP(gpb-7, INPUT, DOWN);
-
-		PIN_SLP(gpc0-0, INPUT, DOWN);
-		PIN_SLP(gpc0-1, INPUT, DOWN);
-		PIN_SLP(gpc0-2, INPUT, DOWN);
-		PIN_SLP(gpc0-3, INPUT, DOWN);
-		PIN_SLP(gpc0-4, INPUT, DOWN);
-
-		PIN_SLP(gpc1-0, INPUT, NONE);
-		PIN_SLP(gpc1-1, PREV, NONE);
-		PIN_SLP(gpc1-2, INPUT, NONE);
-		PIN_SLP(gpc1-3, INPUT, NONE);
-		PIN_SLP(gpc1-4, INPUT, NONE);
-
-		PIN_SLP(gpd0-0, INPUT, DOWN);
-		PIN_SLP(gpd0-1, INPUT, DOWN);
-		PIN_SLP(gpd0-2, INPUT, NONE);
-		PIN_SLP(gpd0-3, INPUT, NONE);
-
-		PIN_SLP(gpd1-0, INPUT, DOWN);
-		PIN_SLP(gpd1-1, INPUT, DOWN);
-		PIN_SLP(gpd1-2, INPUT, NONE);
-		PIN_SLP(gpd1-3, INPUT, NONE);
-
-		PIN_SLP(gpf0-0, INPUT, NONE);
-		PIN_SLP(gpf0-1, INPUT, NONE);
-		PIN_SLP(gpf0-2, INPUT, DOWN);
-		PIN_SLP(gpf0-3, INPUT, DOWN);
-		PIN_SLP(gpf0-4, INPUT, NONE);
-		PIN_SLP(gpf0-5, INPUT, DOWN);
-		PIN_SLP(gpf0-6, INPUT, NONE);
-		PIN_SLP(gpf0-7, INPUT, DOWN);
-
-		PIN_SLP(gpf1-0, INPUT, DOWN);
-		PIN_SLP(gpf1-1, INPUT, DOWN);
-		PIN_SLP(gpf1-2, INPUT, DOWN);
-		PIN_SLP(gpf1-3, INPUT, DOWN);
-		PIN_SLP(gpf1-4, INPUT, NONE);
-		PIN_SLP(gpf1-5, INPUT, NONE);
-		PIN_SLP(gpf1-6, INPUT, DOWN);
-		PIN_SLP(gpf1-7, PREV, NONE);
-
-		PIN_SLP(gpf2-0, PREV, NONE);
-		PIN_SLP(gpf2-1, INPUT, DOWN);
-		PIN_SLP(gpf2-2, INPUT, DOWN);
-		PIN_SLP(gpf2-3, INPUT, DOWN);
-		PIN_SLP(gpf2-4, INPUT, DOWN);
-		PIN_SLP(gpf2-5, INPUT, DOWN);
-		PIN_SLP(gpf2-6, INPUT, NONE);
-		PIN_SLP(gpf2-7, INPUT, NONE);
-
-		PIN_SLP(gpf3-0, INPUT, NONE);
-		PIN_SLP(gpf3-1, PREV, NONE);
-		PIN_SLP(gpf3-2, PREV, NONE);
-		PIN_SLP(gpf3-3, PREV, NONE);
-		PIN_SLP(gpf3-4, OUT1, NONE);
-		PIN_SLP(gpf3-5, INPUT, DOWN);
-
-		PIN_SLP(gpj0-0, PREV, NONE);
-		PIN_SLP(gpj0-1, PREV, NONE);
-		PIN_SLP(gpj0-2, PREV, NONE);
-		PIN_SLP(gpj0-3, INPUT, DOWN);
-		PIN_SLP(gpj0-4, PREV, NONE);
-		PIN_SLP(gpj0-5, PREV, NONE);
-		PIN_SLP(gpj0-6, INPUT, DOWN);
-		PIN_SLP(gpj0-7, INPUT, DOWN);
-
-		PIN_SLP(gpj1-0, INPUT, DOWN);
-		PIN_SLP(gpj1-1, PREV, NONE);
-		PIN_SLP(gpj1-2, PREV, NONE);
-		PIN_SLP(gpj1-3, INPUT, DOWN);
-		PIN_SLP(gpj1-4, INPUT, DOWN);
-	};
-};
-
-&pinctrl_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep1>;
-
-	gpio_keys: gpio-keys-pins {
-		samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	bt_shutdown: bt-shutdown-pins {
-		samsung,pins = "gpl0-6";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	bt_host_wakeup: bt-host-wakeup-pins {
-		samsung,pins = "gpx2-6";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	bt_device_wakeup: bt-device-wakeup-pins {
-		samsung,pins = "gpx3-1";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	max77686_irq: max77686-irq-pins {
-		samsung,pins = "gpx0-7";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	max77693_irq: max77693-irq-pins {
-		samsung,pins = "gpx1-5";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	max77693_fuel_irq: max77693-fuel-irq-pins {
-		samsung,pins = "gpx2-3";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	sdhci2_cd: sdhci2-cd-irq-pins {
-		samsung,pins = "gpx3-4";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	hdmi_hpd: hdmi-hpd-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-	};
-
-	sleep1: sleep-state {
-		PIN_SLP(gpk0-0, PREV, NONE);
-		PIN_SLP(gpk0-1, PREV, NONE);
-		PIN_SLP(gpk0-2, OUT0, NONE);
-		PIN_SLP(gpk0-3, PREV, NONE);
-		PIN_SLP(gpk0-4, PREV, NONE);
-		PIN_SLP(gpk0-5, PREV, NONE);
-		PIN_SLP(gpk0-6, PREV, NONE);
-
-		PIN_SLP(gpk1-0, INPUT, DOWN);
-		PIN_SLP(gpk1-1, INPUT, DOWN);
-		PIN_SLP(gpk1-2, INPUT, DOWN);
-		PIN_SLP(gpk1-3, PREV, NONE);
-		PIN_SLP(gpk1-4, PREV, NONE);
-		PIN_SLP(gpk1-5, PREV, NONE);
-		PIN_SLP(gpk1-6, PREV, NONE);
-
-		PIN_SLP(gpk2-0, INPUT, DOWN);
-		PIN_SLP(gpk2-1, INPUT, DOWN);
-		PIN_SLP(gpk2-2, INPUT, DOWN);
-		PIN_SLP(gpk2-3, INPUT, DOWN);
-		PIN_SLP(gpk2-4, INPUT, DOWN);
-		PIN_SLP(gpk2-5, INPUT, DOWN);
-		PIN_SLP(gpk2-6, INPUT, DOWN);
-
-		PIN_SLP(gpk3-0, OUT0, NONE);
-		PIN_SLP(gpk3-1, INPUT, NONE);
-		PIN_SLP(gpk3-2, INPUT, DOWN);
-		PIN_SLP(gpk3-3, INPUT, NONE);
-		PIN_SLP(gpk3-4, INPUT, NONE);
-		PIN_SLP(gpk3-5, INPUT, NONE);
-		PIN_SLP(gpk3-6, INPUT, NONE);
-
-		PIN_SLP(gpl0-0, INPUT, DOWN);
-		PIN_SLP(gpl0-1, INPUT, DOWN);
-		PIN_SLP(gpl0-2, INPUT, DOWN);
-		PIN_SLP(gpl0-3, INPUT, DOWN);
-		PIN_SLP(gpl0-4, PREV, NONE);
-		PIN_SLP(gpl0-6, PREV, NONE);
-
-		PIN_SLP(gpl1-0, INPUT, DOWN);
-		PIN_SLP(gpl1-1, INPUT, DOWN);
-		PIN_SLP(gpl2-0, INPUT, DOWN);
-		PIN_SLP(gpl2-1, INPUT, DOWN);
-		PIN_SLP(gpl2-2, INPUT, DOWN);
-		PIN_SLP(gpl2-3, INPUT, DOWN);
-		PIN_SLP(gpl2-4, INPUT, DOWN);
-		PIN_SLP(gpl2-5, INPUT, DOWN);
-		PIN_SLP(gpl2-6, PREV, NONE);
-		PIN_SLP(gpl2-7, INPUT, DOWN);
-
-		PIN_SLP(gpm0-0, INPUT, DOWN);
-		PIN_SLP(gpm0-1, INPUT, DOWN);
-		PIN_SLP(gpm0-2, INPUT, DOWN);
-		PIN_SLP(gpm0-3, INPUT, DOWN);
-		PIN_SLP(gpm0-4, INPUT, DOWN);
-		PIN_SLP(gpm0-5, INPUT, DOWN);
-		PIN_SLP(gpm0-6, INPUT, DOWN);
-		PIN_SLP(gpm0-7, INPUT, DOWN);
-
-		PIN_SLP(gpm1-0, INPUT, DOWN);
-		PIN_SLP(gpm1-1, INPUT, DOWN);
-		PIN_SLP(gpm1-2, INPUT, NONE);
-		PIN_SLP(gpm1-3, INPUT, NONE);
-		PIN_SLP(gpm1-4, INPUT, NONE);
-		PIN_SLP(gpm1-5, INPUT, NONE);
-		PIN_SLP(gpm1-6, INPUT, DOWN);
-
-		PIN_SLP(gpm2-0, INPUT, NONE);
-		PIN_SLP(gpm2-1, INPUT, NONE);
-		PIN_SLP(gpm2-2, INPUT, DOWN);
-		PIN_SLP(gpm2-3, INPUT, DOWN);
-		PIN_SLP(gpm2-4, INPUT, DOWN);
-
-		PIN_SLP(gpm3-0, PREV, NONE);
-		PIN_SLP(gpm3-1, PREV, NONE);
-		PIN_SLP(gpm3-2, PREV, NONE);
-		PIN_SLP(gpm3-3, OUT1, NONE);
-		PIN_SLP(gpm3-4, INPUT, DOWN);
-		PIN_SLP(gpm3-5, INPUT, DOWN);
-		PIN_SLP(gpm3-6, INPUT, DOWN);
-		PIN_SLP(gpm3-7, INPUT, DOWN);
-
-		PIN_SLP(gpm4-0, INPUT, DOWN);
-		PIN_SLP(gpm4-1, INPUT, DOWN);
-		PIN_SLP(gpm4-2, INPUT, DOWN);
-		PIN_SLP(gpm4-3, INPUT, DOWN);
-		PIN_SLP(gpm4-4, INPUT, DOWN);
-		PIN_SLP(gpm4-5, INPUT, DOWN);
-		PIN_SLP(gpm4-6, INPUT, DOWN);
-		PIN_SLP(gpm4-7, INPUT, DOWN);
-
-		PIN_SLP(gpy0-0, INPUT, DOWN);
-		PIN_SLP(gpy0-1, INPUT, DOWN);
-		PIN_SLP(gpy0-2, INPUT, DOWN);
-		PIN_SLP(gpy0-3, INPUT, DOWN);
-		PIN_SLP(gpy0-4, INPUT, DOWN);
-		PIN_SLP(gpy0-5, INPUT, DOWN);
-
-		PIN_SLP(gpy1-0, INPUT, DOWN);
-		PIN_SLP(gpy1-1, INPUT, DOWN);
-		PIN_SLP(gpy1-2, INPUT, DOWN);
-		PIN_SLP(gpy1-3, INPUT, DOWN);
-
-		PIN_SLP(gpy2-0, PREV, NONE);
-		PIN_SLP(gpy2-1, INPUT, DOWN);
-		PIN_SLP(gpy2-2, INPUT, NONE);
-		PIN_SLP(gpy2-3, INPUT, NONE);
-		PIN_SLP(gpy2-4, INPUT, NONE);
-		PIN_SLP(gpy2-5, INPUT, NONE);
-
-		PIN_SLP(gpy3-0, INPUT, DOWN);
-		PIN_SLP(gpy3-1, INPUT, DOWN);
-		PIN_SLP(gpy3-2, INPUT, DOWN);
-		PIN_SLP(gpy3-3, INPUT, DOWN);
-		PIN_SLP(gpy3-4, INPUT, DOWN);
-		PIN_SLP(gpy3-5, INPUT, DOWN);
-		PIN_SLP(gpy3-6, INPUT, DOWN);
-		PIN_SLP(gpy3-7, INPUT, DOWN);
-
-		PIN_SLP(gpy4-0, INPUT, DOWN);
-		PIN_SLP(gpy4-1, INPUT, DOWN);
-		PIN_SLP(gpy4-2, INPUT, DOWN);
-		PIN_SLP(gpy4-3, INPUT, DOWN);
-		PIN_SLP(gpy4-4, INPUT, DOWN);
-		PIN_SLP(gpy4-5, INPUT, DOWN);
-		PIN_SLP(gpy4-6, INPUT, DOWN);
-		PIN_SLP(gpy4-7, INPUT, DOWN);
-
-		PIN_SLP(gpy5-0, INPUT, DOWN);
-		PIN_SLP(gpy5-1, INPUT, DOWN);
-		PIN_SLP(gpy5-2, INPUT, DOWN);
-		PIN_SLP(gpy5-3, INPUT, DOWN);
-		PIN_SLP(gpy5-4, INPUT, DOWN);
-		PIN_SLP(gpy5-5, INPUT, DOWN);
-		PIN_SLP(gpy5-6, INPUT, DOWN);
-		PIN_SLP(gpy5-7, INPUT, DOWN);
-
-		PIN_SLP(gpy6-0, INPUT, DOWN);
-		PIN_SLP(gpy6-1, INPUT, DOWN);
-		PIN_SLP(gpy6-2, INPUT, DOWN);
-		PIN_SLP(gpy6-3, INPUT, DOWN);
-		PIN_SLP(gpy6-4, INPUT, DOWN);
-		PIN_SLP(gpy6-5, INPUT, DOWN);
-		PIN_SLP(gpy6-6, INPUT, DOWN);
-		PIN_SLP(gpy6-7, INPUT, DOWN);
-	};
-};
-
-&pinctrl_2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep2>;
-
-	sleep2: sleep-state {
-		PIN_SLP(gpz-0, INPUT, DOWN);
-		PIN_SLP(gpz-1, INPUT, DOWN);
-		PIN_SLP(gpz-2, INPUT, DOWN);
-		PIN_SLP(gpz-3, INPUT, DOWN);
-		PIN_SLP(gpz-4, INPUT, DOWN);
-		PIN_SLP(gpz-5, INPUT, DOWN);
-		PIN_SLP(gpz-6, INPUT, DOWN);
-	};
-};
-
-&pinctrl_3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep3>;
-
-	sleep3: sleep-state {
-		PIN_SLP(gpv0-0, INPUT, DOWN);
-		PIN_SLP(gpv0-1, INPUT, DOWN);
-		PIN_SLP(gpv0-2, INPUT, DOWN);
-		PIN_SLP(gpv0-3, INPUT, DOWN);
-		PIN_SLP(gpv0-4, INPUT, DOWN);
-		PIN_SLP(gpv0-5, INPUT, DOWN);
-		PIN_SLP(gpv0-6, INPUT, DOWN);
-		PIN_SLP(gpv0-7, INPUT, DOWN);
-
-		PIN_SLP(gpv1-0, INPUT, DOWN);
-		PIN_SLP(gpv1-1, INPUT, DOWN);
-		PIN_SLP(gpv1-2, INPUT, DOWN);
-		PIN_SLP(gpv1-3, INPUT, DOWN);
-		PIN_SLP(gpv1-4, INPUT, DOWN);
-		PIN_SLP(gpv1-5, INPUT, DOWN);
-		PIN_SLP(gpv1-6, INPUT, DOWN);
-		PIN_SLP(gpv1-7, INPUT, DOWN);
-
-		PIN_SLP(gpv2-0, INPUT, DOWN);
-		PIN_SLP(gpv2-1, INPUT, DOWN);
-		PIN_SLP(gpv2-2, INPUT, DOWN);
-		PIN_SLP(gpv2-3, INPUT, DOWN);
-		PIN_SLP(gpv2-4, INPUT, DOWN);
-		PIN_SLP(gpv2-5, INPUT, DOWN);
-		PIN_SLP(gpv2-6, INPUT, DOWN);
-		PIN_SLP(gpv2-7, INPUT, DOWN);
-
-		PIN_SLP(gpv3-0, INPUT, DOWN);
-		PIN_SLP(gpv3-1, INPUT, DOWN);
-		PIN_SLP(gpv3-2, INPUT, DOWN);
-		PIN_SLP(gpv3-3, INPUT, DOWN);
-		PIN_SLP(gpv3-4, INPUT, DOWN);
-		PIN_SLP(gpv3-5, INPUT, DOWN);
-		PIN_SLP(gpv3-6, INPUT, DOWN);
-		PIN_SLP(gpv3-7, INPUT, DOWN);
-
-		PIN_SLP(gpv4-0, INPUT, DOWN);
-	};
-};
-
-&pwm {
-	pinctrl-0 = <&pwm0_out>;
-	pinctrl-names = "default";
-	samsung,pwm-outputs = <0>;
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
-	pinctrl-names = "default";
-	vmmc-supply = <&ldo21_reg>;
-	status = "okay";
-};
-
-&sdhci_3 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	non-removable;
-	bus-width = <4>;
-
-	mmc-pwrseq = <&wlan_pwrseq>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&gpx2>;
-		interrupts = <5 IRQ_TYPE_NONE>;
-		interrupt-names = "host-wake";
-	};
-};
-
-&serial_0 {
-	pinctrl-0 = <&uart0_data &uart0_fctl>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4330-bt";
-		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
-		pinctrl-names = "default";
-		max-speed = <3000000>;
-		shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-		clocks = <&max77686 MAX77686_CLK_PMIC>;
-	};
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&spi_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_bus>;
-	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	s5c73m3_spi: image-sensor@0 {
-		compatible = "samsung,s5c73m3";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-		controller-data {
-			samsung,spi-feedback-delay = <2>;
-		};
-	};
-};
-
-&tmu {
-	vtmu-supply = <&ldo10_reg>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
deleted file mode 100644
index 9ae05b0d684cb..0000000000000
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "exynos4412-midas.dtsi"
-
-/ {
-	compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
-	model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412";
-	chassis-type = "handset";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	/* bootargs are passed in by bootloader */
-
-	cam_vdda_reg: voltage-regulator-10 {
-		compatible = "regulator-fixed";
-		regulator-name = "CAM_SENSOR_CORE_1.2V";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&buck9_reg {
-	maxim,ena-gpios = <&gpm1 0 GPIO_ACTIVE_HIGH>;
-};
-
-&cam_af_reg {
-	gpio = <&gpm1 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&cam_io_reg {
-	gpio = <&gpm0 7 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&i2c_3 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c3_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	touchscreen@48 {
-		compatible = "melfas,mms152";
-		reg = <0x48>;
-		interrupt-parent = <&gpm2>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-size-x = <720>;
-		touchscreen-size-y = <1280>;
-		avdd-supply = <&ldo23_reg>;
-		vdd-supply = <&ldo24_reg>;
-	};
-};
-
-&ldo13_reg {
-	regulator-name = "VCC_1.8V_LCD";
-	regulator-always-on;
-};
-
-&ldo25_reg {
-	regulator-name = "VCI_3.0V_LCD";
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-};
-
-&s5c73m3 {
-	standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
-	vdda-supply = <&cam_vdda_reg>;
-	status = "okay";
-};
-
-&sound {
-	samsung,audio-routing =
-		"HP", "HPOUT1L",
-		"HP", "HPOUT1R",
-
-		"SPK", "SPKOUTLN",
-		"SPK", "SPKOUTLP",
-
-		"RCV", "HPOUT2N",
-		"RCV", "HPOUT2P",
-
-		"HDMI", "LINEOUT1N",
-		"HDMI", "LINEOUT1P",
-
-		"LINE", "LINEOUT2N",
-		"LINE", "LINEOUT2P",
-
-		"IN1LP", "MICBIAS2",
-		"IN1LN", "MICBIAS2",
-		"Headset Mic", "MICBIAS2",
-
-		"IN1RP", "Sub Mic",
-		"IN1RN", "Sub Mic",
-
-		"IN2LP:VXRN", "Main Mic",
-		"IN2LN", "Main Mic",
-
-		"IN2RN", "FM In",
-		"IN2RP:VXRP", "FM In";
-};
-
-&submic_bias_reg {
-	regulator-always-on;
-};
-
-&touchkey_reg {
-	gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
deleted file mode 100644
index 45ef7b7ba7e0f..0000000000000
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ /dev/null
@@ -1,576 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
- * device tree source
- */
-
-#include <dt-bindings/sound/samsung-i2s.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/clock/maxim,max77686.h>
-#include "exynos4412.dtsi"
-#include "exynos4412-ppmu-common.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include "exynos-mfc-reserved-memory.dtsi"
-
-/ {
-	aliases {
-		mmc0 = &mshc_0;
-		mmc2 = &sdhci_2;
-	};
-
-	chosen {
-		stdout-path = &serial_1;
-	};
-
-	firmware@204f000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0204f000 0x1000>;
-	};
-
-	gpio_keys: gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_power_key>;
-
-		power-key {
-			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "power key";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	sound: sound {
-		compatible = "hardkernel,odroid-xu4-audio";
-
-		cpu {
-			sound-dai = <&i2s0 0>;
-		};
-
-		codec {
-			sound-dai = <&hdmi>, <&max98090>;
-		};
-	};
-
-	emmc_pwrseq: pwrseq {
-		pinctrl-0 = <&emmc_rstn>;
-		pinctrl-names = "default";
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
-
-&bus_dmc {
-	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
-	vdd-supply = <&buck1_reg>;
-	status = "okay";
-};
-
-&bus_acp {
-	devfreq = <&bus_dmc>;
-	status = "okay";
-};
-
-&bus_c2c {
-	devfreq = <&bus_dmc>;
-	status = "okay";
-};
-
-&bus_leftbus {
-	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
-	vdd-supply = <&buck3_reg>;
-	status = "okay";
-};
-
-&bus_rightbus {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_display {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_fsys {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_peri {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_mfc {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&camera {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <>;
-};
-
-&clock {
-	clocks = <&clock CLK_XUSBXTI>;
-	assigned-clocks = <&clock CLK_FOUT_EPLL>;
-	assigned-clock-rates = <45158401>;
-};
-
-&clock_audss {
-	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
-			<&clock_audss EXYNOS_MOUT_I2S>,
-			<&clock_audss EXYNOS_DOUT_SRP>,
-			<&clock_audss EXYNOS_DOUT_AUD_BUS>,
-			<&clock_audss EXYNOS_DOUT_I2S>;
-
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
-			  <&clock_audss EXYNOS_MOUT_AUDSS>;
-
-	assigned-clock-rates = <0>, <0>,
-			<196608001>,
-			<(196608001 / 2)>,
-			<(196608001 / 8)>;
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&cpu0_opp_table {
-	opp-1000000000 {
-		opp-suspend;
-	};
-	opp-800000000 {
-		/delete-property/opp-suspend;
-	};
-};
-
-&cpu_thermal {
-	cooling-maps {
-		cooling_map0: map0 {
-			/* Corresponds to 800MHz at freq_table */
-			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
-					 <&cpu2 7 7>, <&cpu3 7 7>;
-		};
-		cooling_map1: map1 {
-			/* Corresponds to 200MHz at freq_table */
-			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
-					 <&cpu2 13 13>, <&cpu3 13 13>;
-		};
-	};
-};
-
-&pinctrl_1 {
-	gpio_power_key: power-key-pins {
-		samsung,pins = "gpx1-3";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	max77686_irq: max77686-irq-pins {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	hdmi_hpd: hdmi-hpd-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-	};
-
-	emmc_rstn: emmc-rstn-pins {
-		samsung,pins = "gpk1-2";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-};
-
-&ehci {
-	status = "okay";
-};
-
-&exynos_usbphy {
-	status = "okay";
-};
-
-&fimc_0 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-			<&clock CLK_SCLK_FIMC0>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_1 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-			<&clock CLK_SCLK_FIMC1>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_2 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-			<&clock CLK_SCLK_FIMC2>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_3 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-			<&clock CLK_SCLK_FIMC3>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&gpu {
-	mali-supply = <&buck4_reg>;
-	status = "okay";
-};
-
-&hdmi {
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd>;
-	vdd-supply = <&ldo8_reg>;
-	vdd_osc-supply = <&ldo10_reg>;
-	vdd_pll-supply = <&ldo8_reg>;
-	ddc = <&i2c_2>;
-	status = "okay";
-};
-
-&hdmicec {
-	status = "okay";
-};
-
-&hsotg {
-	status = "okay";
-	vusb_d-supply = <&ldo15_reg>;
-	vusb_a-supply = <&ldo12_reg>;
-};
-
-&i2c_0 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <400000>;
-	status = "okay";
-
-	usb3503: usb-hub@8 {
-		compatible = "smsc,usb3503";
-		reg = <0x08>;
-
-		intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
-		connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-		initial-mode = <1>;
-	};
-
-	max77686: pmic@9 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max77686_irq>;
-		wakeup-source;
-		reg = <0x09>;
-		#clock-cells = <1>;
-
-		voltage-regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ALIVE_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDDQ_M1_2_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VDDQ_EXT_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VDDQ_MMC2_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-boot-on;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VDDQ_MMC1_3_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VDD10_MPLL_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VDD10_XPLL_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VDD10_HDMI_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VDDQ_MIPIHSI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VDD18_ABB1_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "VDD33_USB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VDDQ_C2C_W_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VDD18_ABB0_2_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VDD10_HSIC_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VDD18_HSIC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "LDO20_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "TFLASH_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-boot-on;
-			};
-
-			ldo22_reg: LDO22 {
-				/*
-				 * Only U3 uses it, so let it define the
-				 * constraints
-				 */
-				regulator-name = "LDO22";
-				regulator-boot-on;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "VDDQ_LCD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_MIF";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VDD_ARM";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VDD_INT";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1050000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VDD_G3D";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-microvolt-offset = <50000>;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VDDQ_CKEM1_2_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "BUCK6_1.35V";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "BUCK7_2.0V";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				/*
-				 * Constraints set by specific board: X,
-				 * X2 and U3.
-				 */
-				regulator-name = "BUCK8_2.8V";
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	status = "okay";
-	max98090: audio-codec@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <0 IRQ_TYPE_NONE>;
-		clocks = <&i2s0 CLK_I2S_CDCLK>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-	};
-};
-
-&i2c_2 {
-	status = "okay";
-};
-
-&i2c_8 {
-	status = "okay";
-};
-
-&i2s0 {
-	pinctrl-0 = <&i2s0_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
-	assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>;
-};
-
-&mixer {
-	status = "okay";
-};
-
-&mshc_0 {
-	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-	pinctrl-names = "default";
-	vmmc-supply = <&ldo20_reg>;
-	mmc-pwrseq = <&emmc_pwrseq>;
-	status = "okay";
-
-	broken-cd;
-	card-detect-delay = <200>;
-	mmc-ddr-1_8v;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	pinctrl-names = "default";
-	vmmc-supply = <&ldo21_reg>;
-	vqmmc-supply = <&ldo4_reg>;
-	cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&tmu {
-	vtmu-supply = <&ldo10_reg>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
deleted file mode 100644
index 42812da1f8823..0000000000000
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel's Exynos4412 based ODROID-U3 board device tree source
- *
- * Copyright (c) 2014 Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * Device tree source file for Hardkernel's ODROID-U3 board which is based
- * on Samsung's Exynos4412 SoC.
- */
-
-/dts-v1/;
-#include <dt-bindings/leds/common.h>
-#include "exynos4412-odroid-common.dtsi"
-#include "exynos4412-prime.dtsi"
-
-/ {
-	model = "Hardkernel ODROID-U3 board based on Exynos4412";
-	compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		ethernet = &ethernet;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x7ff00000>;
-	};
-
-	vbus_otg_reg: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS_VDD_5.0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpl2 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			function = LED_FUNCTION_HEARTBEAT;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm 0 10000 0>;
-		#cooling-cells = <2>;
-		cooling-levels = <0 102 170 230>;
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo10_reg>;
-	/* Nothing connected to ADC inputs, keep it disabled */
-};
-
-/* Supply for LAN9730/SMSC95xx */
-&buck8_reg {
-	regulator-name = "BUCK8_P3V3";
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-};
-
-&cpu_thermal {
-	cooling-maps {
-		map0 {
-			trip = <&cpu_alert1>;
-			cooling-device = <&cpu0 9 9>, <&cpu1 9 9>,
-					 <&cpu2 9 9>, <&cpu3 9 9>,
-					 <&fan0 1 2>;
-		};
-		map1 {
-			trip = <&cpu_alert2>;
-			cooling-device = <&cpu0 15 15>, <&cpu1 15 15>,
-					 <&cpu2 15 15>, <&cpu3 15 15>,
-					 <&fan0 2 3>;
-		};
-		map2 {
-			trip = <&cpu_alert0>;
-			cooling-device = <&fan0 0 1>;
-		};
-	};
-};
-
-&hdmicec {
-	needs-hpd;
-};
-
-/* VDDQ for MSHC (eMMC card) */
-&ldo22_reg {
-	regulator-name = "LDO22_VDDQ_MMC4_2.8V";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&mshc_0 {
-	vqmmc-supply = <&ldo22_reg>;
-};
-
-&pwm {
-	pinctrl-0 = <&pwm0_out>;
-	pinctrl-names = "default";
-	samsung,pwm-outputs = <0>;
-	status = "okay";
-};
-
-&usb3503 {
-	clock-names = "refclk";
-	clocks = <&pmu_system_controller 0>;
-	refclk-frequency = <24000000>;
-};
-
-&ehci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
-	phy-names = "hsic0", "hsic1";
-
-	ethernet: ethernet@2 {
-		compatible = "usb424,9730";
-		reg = <2>;
-		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
-	};
-};
-
-&hsotg {
-	dr_mode = "otg";
-	vbus-supply = <&vbus_otg_reg>;
-};
-
-&sound {
-	model = "Odroid-U3";
-	samsung,audio-widgets =
-		"Headphone", "Headphone Jack",
-		"Speakers", "Speakers";
-	samsung,audio-routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"Headphone Jack", "MICBIAS",
-		"IN1", "Headphone Jack",
-		"Speakers", "SPKL",
-		"Speakers", "SPKR";
-};
-
-&spi_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_bus>;
-	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
deleted file mode 100644
index d5316cf2fbb61..0000000000000
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel's Exynos4412 based ODROID-X board device tree source
- *
- * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
- *
- * Device tree source file for Hardkernel's ODROID-X board which is based
- * on Samsung's Exynos4412 SoC.
- */
-
-/dts-v1/;
-#include <dt-bindings/leds/common.h>
-#include "exynos4412-odroid-common.dtsi"
-
-/ {
-	model = "Hardkernel ODROID-X board based on Exynos4412";
-	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		ethernet = &ethernet;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x3ff00000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			function = LED_FUNCTION_HEARTBEAT;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		led2 {
-			label = "led2:mmc0";
-			function = LED_FUNCTION_DISK_ACTIVITY;
-			gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "p3v3_en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpa1 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo10_reg>;
-	status = "okay";
-};
-
-/* VDDQ for MSHC (eMMC card) */
-&buck8_reg {
-	regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&ehci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	phys = <&exynos_usbphy 2>;
-	phy-names = "hsic0";
-
-	hub@2 {
-		compatible = "usb424,3503";
-		reg = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hub@1 {
-			compatible = "usb424,9514";
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ethernet: ethernet@1 {
-				compatible = "usb424,ec00";
-				reg = <1>;
-				/* Filled in by a bootloader */
-				local-mac-address = [00 00 00 00 00 00];
-			};
-		};
-	};
-};
-
-&gpio_keys {
-	pinctrl-0 = <&gpio_power_key &gpio_home_key>;
-
-	home-key {
-		gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
-		linux,code = <KEY_HOME>;
-		label = "home key";
-		debounce-interval = <10>;
-		wakeup-source;
-	};
-};
-
-&hsotg {
-	dr_mode = "peripheral";
-};
-
-&mshc_0 {
-	vqmmc-supply = <&buck8_reg>;
-};
-
-&pinctrl_1 {
-	gpio_home_key: home-key-pins {
-		samsung,pins = "gpx2-2";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&sound {
-	model = "Odroid-X";
-	samsung,audio-widgets =
-		"Headphone", "Headphone Jack",
-		"Microphone", "Mic Jack",
-		"Microphone", "DMIC";
-	samsung,audio-routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"IN1", "Mic Jack",
-		"Mic Jack", "MICBIAS";
-};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
deleted file mode 100644
index 7be4cbdc4413f..0000000000000
--- a/arch/arm/boot/dts/exynos4412-odroidx2.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel's Exynos4412 based ODROID-X2 board device tree source
- *
- * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
- *
- * Device tree source file for Hardkernel's ODROID-X2 board which is based
- * on Samsung's Exynos4412 SoC.
- */
-
-#include "exynos4412-odroidx.dts"
-#include "exynos4412-prime.dtsi"
-
-/ {
-	model = "Hardkernel ODROID-X2 board based on Exynos4412";
-	compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x7ff00000>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
deleted file mode 100644
index 23b151645d668..0000000000000
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ /dev/null
@@ -1,558 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Insignal's Exynos4412 based Origen board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Insignal's Origen board which is based on
- * Samsung's Exynos4412 SoC.
- */
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "exynos-mfc-reserved-memory.dtsi"
-
-/ {
-	model = "Insignal Origen evaluation board based on Exynos4412";
-	compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	aliases {
-		mmc0 = &mshc_0;
-		mmc1 = &sdhci_2;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	firmware@203f000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0203f000 0x1000>;
-	};
-
-	mmc_reg: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing {
-			clock-frequency = <47500000>;
-			hactive = <1024>;
-			vactive = <600>;
-			hfront-porch = <64>;
-			hback-porch = <16>;
-			hsync-len = <48>;
-			vback-porch = <64>;
-			vfront-porch = <16>;
-			vsync-len = <3>;
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&cpu_thermal {
-	cooling-maps {
-		cooling_map0: map0 {
-			/* Corresponds to 800MHz at freq_table */
-			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
-					 <&cpu2 7 7>, <&cpu3 7 7>;
-		};
-		cooling_map1: map1 {
-			/* Corresponds to 200MHz at freq_table */
-			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
-					 <&cpu2 13 13>, <&cpu3 13 13>;
-		};
-	};
-};
-
-&exynos_usbphy {
-	status = "okay";
-};
-
-&ehci {
-	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
-	phy-names = "hsic0", "hsic1";
-};
-
-&fimd {
-	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2c_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <20000>;
-	pinctrl-0 = <&i2c0_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	pmic@66 {
-		compatible = "samsung,s5m8767-pmic";
-		reg = <0x66>;
-
-		s5m8767,pmic-buck-default-dvs-idx = <3>;
-
-		s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
-						 <&gpx2 4 GPIO_ACTIVE_HIGH>,
-						 <&gpx2 5 GPIO_ACTIVE_HIGH>;
-
-		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
-						<&gpm3 6 GPIO_ACTIVE_HIGH>,
-						<&gpm3 7 GPIO_ACTIVE_HIGH>;
-
-		s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>;
-
-		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
-						 <1100000>, <1100000>,
-						 <1100000>, <1100000>,
-						 <1100000>, <1100000>;
-
-		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>;
-		wakeup-source;
-
-		s5m8767_osc: clocks {
-			compatible = "samsung,s5m8767-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s5m8767_ap", "s5m8767_cp",
-					     "s5m8767_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ALIVE";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDDQ_M12";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VDDIOAP_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VDDQ_PRE";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VDD18_2M";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VDD10_MPLL";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VDD10_XPLL";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VDD10_MIPI";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "VDD33_LCD";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VDD18_MIPI";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VDD18_ABB1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "VDD33_UOTG";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VDDIOPERI_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VDD18_ABB02";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VDD10_USH";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VDD18_HSIC";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "VDDIOAP_MMC012_28";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "VDDIOPERI_28";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "DVDD25";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "VDD28_CAM";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "VDD28_AF";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "VDDA28_2M";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "VDD28_TF";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "VDD33_A31";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "VDD18_CAM";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "VDD18_A31";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo27_reg: LDO27 {
-				regulator-name = "GPS_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo28_reg: LDO28 {
-				regulator-name = "DVDD12";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_MIF";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VDD_ARM";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VDD_INT";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VDD_G3D";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VDD_M12";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "VDD12_5M";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "VDDF28_EMMC";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>; /* Normal Mode */
-			};
-		};
-	};
-};
-
-&keypad {
-	samsung,keypad-num-rows = <3>;
-	samsung,keypad-num-columns = <2>;
-	linux,keypad-no-autorepeat;
-	wakeup-source;
-	pinctrl-0 = <&keypad_rows &keypad_cols>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	key-home {
-		keypad,row = <0>;
-		keypad,column = <0>;
-		linux,code = <KEY_HOME>;
-	};
-
-	key-down {
-		keypad,row = <0>;
-		keypad,column = <1>;
-		linux,code = <KEY_DOWN>;
-	};
-
-	key-up {
-		keypad,row = <1>;
-		keypad,column = <0>;
-		linux,code = <KEY_UP>;
-	};
-
-	key-menu {
-		keypad,row = <1>;
-		keypad,column = <1>;
-		linux,code = <KEY_MENU>;
-	};
-
-	key-back {
-		keypad,row = <2>;
-		keypad,column = <0>;
-		linux,code = <KEY_BACK>;
-	};
-
-	key-enter {
-		keypad,row = <2>;
-		keypad,column = <1>;
-		linux,code = <KEY_ENTER>;
-	};
-};
-
-&mshc_0 {
-	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	broken-cd;
-	card-detect-delay = <200>;
-	mmc-ddr-1_8v;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&pinctrl_1 {
-	keypad_rows: keypad-rows-pins {
-		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	keypad_cols: keypad-cols-pins {
-		samsung,pins = "gpx1-0", "gpx1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-	pinctrl-names = "default";
-	vmmc-supply = <&mmc_reg>;
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-p4note-n8010.dts b/arch/arm/boot/dts/exynos4412-p4note-n8010.dts
deleted file mode 100644
index 0932ec5866cc7..0000000000000
--- a/arch/arm/boot/dts/exynos4412-p4note-n8010.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Galaxy Note 10.1 - N801x (wifi only version)
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos4412-p4note.dtsi"
-
-/ {
-	model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412";
-	compatible = "samsung,n8010", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
-	chassis-type = "tablet";
-
-	/* this is the base variant without any kind of modem */
-};
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
deleted file mode 100644
index 0b89d5682f857..0000000000000
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ /dev/null
@@ -1,1229 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 based p4note device family base DT.
- * Based on exynos4412-midas.dtsi.
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-#include "exynos4412-ppmu-common.dtsi"
-
-#include <dt-bindings/clock/maxim,max77686.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/power/summit,smb347-charger.h>
-#include "exynos-pinctrl.h"
-
-/ {
-	compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		mmc0 = &mshc_0;
-		mmc2 = &sdhci_2;
-		mmc3 = &sdhci_3;
-	};
-
-	chosen {
-		stdout-path = &serial_2;
-	};
-
-	firmware@204f000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0204f000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys>;
-
-		key-down {
-			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			label = "volume down";
-			debounce-interval = <10>;
-		};
-
-		key-up {
-			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			label = "volume up";
-			debounce-interval = <10>;
-		};
-
-		key-power {
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "power";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	voltage-regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "TSP_LDO1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsp_reg_gpio_1>;
-		gpios = <&gpm4 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	voltage-regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "TSP_LDO2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsp_reg_gpio_2>;
-		gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	voltage-regulator-3 {
-		compatible = "regulator-fixed";
-		regulator-name = "TSP_LDO3";
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsp_reg_gpio_3>;
-		gpios = <&gpb 7 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <20000>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	panel_vdd: voltage-regulator-4 {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD_ENABLE";
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_enable>;
-		gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	wlan_pwrseq: sdhci3-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
-		pinctrl-0 = <&wifi_reset>;
-		pinctrl-names = "default";
-		clocks = <&max77686 MAX77686_CLK_PMIC>;
-		clock-names = "ext_clock";
-	};
-
-	battery_cell: battery-cell {
-		compatible = "simple-battery";
-		device-chemistry = "lithium-ion";
-		constant-charge-current-max-microamp = <2200000>;
-		precharge-current-microamp = <250000>;
-		charge-term-current-microamp = <250000>;
-		constant-charge-voltage-max-microvolt = <4200000>;
-	};
-
-	i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		magnetometer@c {
-			compatible = "asahi-kasei,ak8975";
-			reg = <0x0c>;
-			pinctrl-0 = <&ak8975_irq>;
-			pinctrl-names = "default";
-			interrupt-parent = <&gpm4>;
-			interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-		};
-	};
-
-	i2c-gpio-2 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fuel-gauge@36 {
-			compatible = "maxim,max17042";
-			reg = <0x36>;
-			pinctrl-0 = <&fuel_alert_irq>;
-			pinctrl-names = "default";
-			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-			maxim,rsns-microohm = <10000>;
-			maxim,over-heat-temp = <600>;
-			maxim,over-volt = <4300>;
-		};
-	};
-
-	i2c-gpio-3 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		adc@41 {
-			compatible = "st,stmpe811";
-			reg = <0x41>;
-			pinctrl-0 = <&stmpe_adc_irq>;
-			pinctrl-names = "default";
-			interrupt-parent = <&gpx0>;
-			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-			st,adc-freq = <3>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,sample-time = <3>;
-
-			adc {
-				compatible = "st,stmpe-adc";
-				#io-channel-cells = <1>;
-				st,norequest-mask = <0x2f>;
-			};
-		};
-	};
-
-	i2c-gpio-4 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		power_supply: charger@6 {
-			compatible = "summit,smb347";
-			reg = <0x6>;
-			summit,enable-usb-charging;
-			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
-			summit,fast-voltage-threshold-microvolt = <2600000>;
-			summit,chip-temperature-threshold-celsius = <130>;
-			summit,usb-current-limit-microamp = <1800000>;
-
-			monitored-battery = <&battery_cell>;
-		};
-	};
-
-	panel {
-		compatible = "samsung,ltl101al01";
-		pinctrl-0 = <&lvds_nshdn>;
-		pinctrl-names = "default";
-		power-supply = <&panel_vdd>;
-		enable-gpios = <&gpm0 5 GPIO_ACTIVE_HIGH>;
-		backlight = <&backlight>;
-
-		port {
-			lcd_ep: endpoint {
-				remote-endpoint = <&fimd_ep>;
-			};
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-0 = <&led_bl_reset>;
-		pinctrl-names = "default";
-		enable-gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>;
-		power-supply = <&panel_vdd>;
-		pwms = <&pwm 1 78770 0>;
-		brightness-levels = <0 48 128 255>;
-		num-interpolated-steps = <8>;
-		default-brightness-level = <12>;
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo3_reg>;
-	/* not verified */
-	status = "okay";
-};
-
-&bus_dmc {
-	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
-	vdd-supply = <&buck1_reg>;
-	status = "okay";
-};
-
-&bus_acp {
-	devfreq = <&bus_dmc>;
-	status = "okay";
-};
-
-&bus_c2c {
-	devfreq = <&bus_dmc>;
-	status = "okay";
-};
-
-&bus_leftbus {
-	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
-	vdd-supply = <&buck3_reg>;
-	status = "okay";
-};
-
-&bus_rightbus {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_display {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_fsys {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_peri {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_mfc {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&cpu_thermal {
-	cooling-maps {
-		map0 {
-			/* Corresponds to 800MHz at freq_table */
-			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
-					 <&cpu2 7 7>, <&cpu3 7 7>;
-		};
-		map1 {
-			/* Corresponds to 200MHz at freq_table */
-			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
-					 <&cpu2 13 13>, <&cpu3 13 13>;
-		};
-	};
-};
-
-&exynos_usbphy {
-	status = "okay";
-};
-
-&fimd {
-	pinctrl-0 = <&lcd_clk &lcd_data24>;
-	pinctrl-names = "default";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	samsung,invert-vclk;
-
-	port@3 {
-		reg = <3>;
-
-		fimd_ep: endpoint {
-			remote-endpoint = <&lcd_ep>;
-		};
-	};
-};
-
-&gpu {
-	mali-supply = <&buck4_reg>;
-	status = "okay";
-};
-
-&hsotg {
-	vusb_a-supply = <&ldo12_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_3 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c3_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		pinctrl-0 = <&tsp_rst &tsp_irq>;
-		pinctrl-names = "default";
-		interrupt-parent = <&gpm2>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpm0 4 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2c_7 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c7_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	max77686: pmic@9 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&max77686_irq>;
-		pinctrl-names = "default";
-		wakeup-source;
-		reg = <0x09>;
-		#clock-cells = <1>;
-
-		voltage-regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "ldo1";
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "ldo2";
-				regulator-always-on;
-			};
-
-			/* WM8994 audio */
-			ldo3_reg: LDO3 {
-				regulator-name = "VCC_1.8V_AP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "ldo4";
-				regulator-always-on;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VCC_1.8V_IO";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "ldo6";
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "ldo7";
-				regulator-always-on;
-			};
-
-			/* CSI IP block */
-			ldo8_reg: LDO8 {
-				regulator-name = "VMIPI_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			/* IR LED on/off */
-			ldo9_reg: LDO9 {
-				regulator-name = "VLED_IC_1.9V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			/* CSI IP block */
-			ldo10_reg: LDO10 {
-				regulator-name = "VMIPI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VABB1_1.9V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			/* USB OTG */
-			ldo12_reg: LDO12 {
-				regulator-name = "VUOTG_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			/* not connected */
-			ldo13_reg: LDO13 {
-				regulator-name = "ldo13";
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VABB2_1.9V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "ldo15";
-				regulator-always-on;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "ldo16";
-				regulator-always-on;
-			};
-
-			/* not connected */
-			ldo17_reg: LDO17 {
-				regulator-name = "ldo17";
-			};
-
-			/* Camera ISX012 */
-			ldo18_reg: LDO18 {
-				regulator-name = "CAM_IO_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			/* Camera S5K6A3 */
-			ldo19_reg: LDO19 {
-				regulator-name = "VT_CORE_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			/* not connected */
-			ldo20_reg: LDO20 {
-				regulator-name = "ldo20";
-			};
-
-			/* MMC2 */
-			ldo21_reg: LDO21 {
-				regulator-name = "VTF_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
-			};
-
-			/* not connected */
-			ldo22_reg: LDO22 {
-				regulator-name = "ldo22";
-			};
-
-			/* ADC */
-			ldo23_reg: LDO23 {
-				regulator-name = "VDD_ADC_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			/* Camera S5K6A3 */
-			ldo24_reg: LDO24 {
-				regulator-name = "CAM_A2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "VLED_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			/* Camera ISX012 */
-			ldo26_reg: LDO26 {
-				regulator-name = "3MP_AF_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_MIF";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1050000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VDD_ARM";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VDD_INT";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VDD_G3D";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1075000>;
-				regulator-boot-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "buck5";
-				regulator-always-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "buck6";
-				regulator-always-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "buck7";
-				regulator-always-on;
-			};
-
-			/* not connected */
-			buck8_reg: BUCK8 {
-				regulator-name = "buck8";
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "3MP_CORE_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&mshc_0 {
-	broken-cd;
-	non-removable;
-	card-detect-delay = <200>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <0>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	mmc-ddr-1_8v;
-	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-	pinctrl-names = "default";
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	status = "okay";
-};
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep0>;
-
-	tsp_reg_gpio_2: tsp-reg-gpio-2-pins {
-		samsung,pins = "gpb-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	tsp_reg_gpio_3: tsp-reg-gpio-3-pins {
-		samsung,pins = "gpb-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	lcd_enable: lcd-enable-pins {
-		samsung,pins = "gpc0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	sleep0: sleep-state {
-		PIN_SLP(gpa0-0, INPUT, NONE);
-		PIN_SLP(gpa0-1, OUT0, NONE);
-		PIN_SLP(gpa0-2, INPUT, NONE);
-		PIN_SLP(gpa0-3, INPUT, UP);
-		PIN_SLP(gpa0-4, INPUT, NONE);
-		PIN_SLP(gpa0-5, INPUT, DOWN);
-		PIN_SLP(gpa0-6, INPUT, DOWN);
-		PIN_SLP(gpa0-7, INPUT, UP);
-
-		PIN_SLP(gpa1-0, INPUT, DOWN);
-		PIN_SLP(gpa1-1, INPUT, DOWN);
-		PIN_SLP(gpa1-2, INPUT, DOWN);
-		PIN_SLP(gpa1-3, INPUT, DOWN);
-		PIN_SLP(gpa1-4, INPUT, DOWN);
-		PIN_SLP(gpa1-5, INPUT, DOWN);
-
-		PIN_SLP(gpb-0, INPUT, NONE);
-		PIN_SLP(gpb-1, INPUT, NONE);
-		PIN_SLP(gpb-2, INPUT, NONE);
-		PIN_SLP(gpb-3, INPUT, NONE);
-		PIN_SLP(gpb-4, INPUT, DOWN);
-		PIN_SLP(gpb-5, INPUT, DOWN);
-		PIN_SLP(gpb-6, INPUT, DOWN);
-		PIN_SLP(gpb-7, INPUT, DOWN);
-
-		PIN_SLP(gpc0-0, INPUT, DOWN);
-		PIN_SLP(gpc0-1, INPUT, DOWN);
-		PIN_SLP(gpc0-2, INPUT, DOWN);
-		PIN_SLP(gpc0-3, INPUT, DOWN);
-		PIN_SLP(gpc0-4, INPUT, DOWN);
-
-		PIN_SLP(gpc1-0, INPUT, UP);
-		PIN_SLP(gpc1-1, PREV, NONE);
-		PIN_SLP(gpc1-2, INPUT, UP);
-		PIN_SLP(gpc1-3, INPUT, UP);
-		PIN_SLP(gpc1-4, INPUT, UP);
-
-		PIN_SLP(gpd0-0, INPUT, DOWN);
-		PIN_SLP(gpd0-1, OUT0, NONE);
-		PIN_SLP(gpd0-2, INPUT, NONE);
-		PIN_SLP(gpd0-3, INPUT, NONE);
-
-		PIN_SLP(gpd1-0, INPUT, DOWN);
-		PIN_SLP(gpd1-1, INPUT, DOWN);
-		PIN_SLP(gpd1-2, INPUT, NONE);
-		PIN_SLP(gpd1-3, INPUT, NONE);
-
-		PIN_SLP(gpf0-0, OUT0, NONE);
-		PIN_SLP(gpf0-1, OUT0, NONE);
-		PIN_SLP(gpf0-2, OUT0, NONE);
-		PIN_SLP(gpf0-3, OUT0, NONE);
-		PIN_SLP(gpf0-4, OUT0, NONE);
-		PIN_SLP(gpf0-5, OUT0, NONE);
-		PIN_SLP(gpf0-6, OUT0, NONE);
-		PIN_SLP(gpf0-7, OUT0, NONE);
-
-		PIN_SLP(gpf1-0, OUT0, NONE);
-		PIN_SLP(gpf1-1, OUT0, NONE);
-		PIN_SLP(gpf1-2, OUT0, NONE);
-		PIN_SLP(gpf1-3, OUT0, NONE);
-		PIN_SLP(gpf1-4, OUT0, NONE);
-		PIN_SLP(gpf1-5, OUT0, NONE);
-		PIN_SLP(gpf1-6, OUT0, NONE);
-		PIN_SLP(gpf1-7, OUT0, NONE);
-
-		PIN_SLP(gpf2-0, OUT0, NONE);
-		PIN_SLP(gpf2-1, OUT0, NONE);
-		PIN_SLP(gpf2-2, OUT0, NONE);
-		PIN_SLP(gpf2-3, OUT0, NONE);
-		PIN_SLP(gpf2-4, OUT0, NONE);
-		PIN_SLP(gpf2-5, OUT0, NONE);
-		PIN_SLP(gpf2-6, OUT0, NONE);
-		PIN_SLP(gpf2-7, OUT0, NONE);
-
-		PIN_SLP(gpf3-0, OUT0, NONE);
-		PIN_SLP(gpf3-1, OUT0, NONE);
-		PIN_SLP(gpf3-2, OUT0, NONE);
-		PIN_SLP(gpf3-3, OUT0, NONE);
-		PIN_SLP(gpf3-4, OUT0, NONE);
-		PIN_SLP(gpf3-5, OUT0, NONE);
-
-		PIN_SLP(gpj0-0, INPUT, DOWN);
-		PIN_SLP(gpj0-1, INPUT, DOWN);
-		PIN_SLP(gpj0-2, INPUT, DOWN);
-		PIN_SLP(gpj0-3, PREV, NONE);
-		PIN_SLP(gpj0-4, PREV, NONE);
-		PIN_SLP(gpj0-5, OUT0, NONE);
-		PIN_SLP(gpj0-6, OUT0, NONE);
-		PIN_SLP(gpj0-7, OUT0, NONE);
-
-		PIN_SLP(gpj1-0, OUT0, NONE);
-		PIN_SLP(gpj1-1, INPUT, DOWN);
-		PIN_SLP(gpj1-2, PREV, NONE);
-		PIN_SLP(gpj1-3, OUT0, NONE);
-	};
-};
-
-&pinctrl_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep1>;
-
-	sd3_wifi: sd3-wifi-pins {
-		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	bt_shutdown: bt-shutdown-pins {
-		samsung,pins = "gpl0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	uart_sel: uart-sel-pins {
-		samsung,pins = "gpl2-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-val = <1>;
-		/* 0 = CP, 1 = AP (serial output) */
-	};
-
-	led_bl_reset: led-bl-reset-pins {
-		samsung,pins = "gpm0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	tsp_rst: tsp-rst-pins {
-		samsung,pins = "gpm0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	lvds_nshdn: lvds-nshdn-pins {
-		samsung,pins = "gpm0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	tsp_irq: tsp-irq-pins {
-		samsung,pins = "gpm2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	wifi_reset: wifi-reset-pins {
-		samsung,pins = "gpm3-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	tsp_reg_gpio_1: tsp-reg-gpio-1-pins {
-		samsung,pins = "gpm4-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	ak8975_irq: ak8975-irq-pins {
-		samsung,pins = "gpm4-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-	};
-
-	stmpe_adc_irq: stmpe-adc-irq-pins {
-		samsung,pins = "gpx0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	max77686_irq: max77686-irq-pins {
-		samsung,pins = "gpx0-7";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	gpio_keys: gpio-keys-pins {
-		samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	fuel_alert_irq: fuel-alert-irq-pins {
-		samsung,pins = "gpx2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	wifi_host_wake: wifi-host-wake-pins {
-		samsung,pins = "gpx2-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-	};
-
-	bt_host_wakeup: bt-host-wakeup-pins {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	bt_device_wakeup: bt-device-wakeup-pins {
-		samsung,pins = "gpx3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	sdhci2_cd: sdhci2-cd-pins {
-		samsung,pins = "gpx3-4";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	sleep1: sleep-state {
-		PIN_SLP(gpk0-0, PREV, NONE);
-		PIN_SLP(gpk0-1, PREV, NONE);
-		PIN_SLP(gpk0-2, PREV, NONE);
-		PIN_SLP(gpk0-3, PREV, NONE);
-		PIN_SLP(gpk0-4, PREV, NONE);
-		PIN_SLP(gpk0-5, PREV, NONE);
-		PIN_SLP(gpk0-6, PREV, NONE);
-
-		PIN_SLP(gpk1-0, INPUT, DOWN);
-		PIN_SLP(gpk1-1, INPUT, DOWN);
-		PIN_SLP(gpk1-2, INPUT, DOWN);
-		PIN_SLP(gpk1-3, PREV, NONE);
-		PIN_SLP(gpk1-4, PREV, NONE);
-		PIN_SLP(gpk1-5, PREV, NONE);
-		PIN_SLP(gpk1-6, PREV, NONE);
-
-		PIN_SLP(gpk2-0, INPUT, DOWN);
-		PIN_SLP(gpk2-1, INPUT, DOWN);
-		PIN_SLP(gpk2-2, INPUT, DOWN);
-		PIN_SLP(gpk2-3, INPUT, DOWN);
-		PIN_SLP(gpk2-4, INPUT, DOWN);
-		PIN_SLP(gpk2-5, INPUT, DOWN);
-		PIN_SLP(gpk2-6, INPUT, DOWN);
-
-		PIN_SLP(gpk3-0, OUT0, NONE);
-		PIN_SLP(gpk3-1, INPUT, NONE);
-		PIN_SLP(gpk3-2, INPUT, DOWN);
-		PIN_SLP(gpk3-3, INPUT, NONE);
-		PIN_SLP(gpk3-4, INPUT, NONE);
-		PIN_SLP(gpk3-5, INPUT, NONE);
-		PIN_SLP(gpk3-6, INPUT, NONE);
-
-		PIN_SLP(gpl0-0, OUT0, NONE);
-		PIN_SLP(gpl0-1, INPUT, NONE);
-		PIN_SLP(gpl0-2, INPUT, NONE);
-		PIN_SLP(gpl0-3, INPUT, DOWN);
-		PIN_SLP(gpl0-4, PREV, NONE);
-		PIN_SLP(gpl0-6, PREV, NONE);
-
-		PIN_SLP(gpl1-0, OUT0, NONE);
-		PIN_SLP(gpl1-1, OUT0, NONE);
-
-		PIN_SLP(gpl2-0, INPUT, DOWN);
-		PIN_SLP(gpl2-1, INPUT, DOWN);
-		PIN_SLP(gpl2-2, INPUT, DOWN);
-		PIN_SLP(gpl2-3, INPUT, DOWN);
-		PIN_SLP(gpl2-4, OUT0, NONE);
-		PIN_SLP(gpl2-5, INPUT, DOWN);
-		PIN_SLP(gpl2-6, PREV, NONE);
-		PIN_SLP(gpl2-7, PREV, NONE);
-
-		PIN_SLP(gpm0-0, PREV, NONE);
-		PIN_SLP(gpm0-1, OUT0, NONE);
-		PIN_SLP(gpm0-2, INPUT, DOWN);
-		PIN_SLP(gpm0-3, INPUT, NONE);
-		PIN_SLP(gpm0-4, OUT0, NONE);
-		PIN_SLP(gpm0-5, OUT0, NONE);
-		PIN_SLP(gpm0-6, INPUT, DOWN);
-		PIN_SLP(gpm0-7, OUT0, NONE);
-
-		PIN_SLP(gpm1-0, INPUT, NONE);
-		PIN_SLP(gpm1-1, INPUT, NONE);
-		PIN_SLP(gpm1-2, INPUT, NONE);
-		PIN_SLP(gpm1-3, INPUT, NONE);
-		PIN_SLP(gpm1-4, INPUT, NONE);
-		PIN_SLP(gpm1-5, INPUT, NONE);
-		PIN_SLP(gpm1-6, INPUT, DOWN);
-
-		PIN_SLP(gpm2-0, INPUT, NONE);
-		PIN_SLP(gpm2-1, INPUT, NONE);
-		PIN_SLP(gpm2-2, OUT0, NONE);
-		PIN_SLP(gpm2-3, OUT0, DOWN);
-		PIN_SLP(gpm2-4, INPUT, DOWN);
-
-		PIN_SLP(gpm3-0, PREV, NONE);
-		PIN_SLP(gpm3-1, PREV, NONE);
-		PIN_SLP(gpm3-2, PREV, NONE);
-		PIN_SLP(gpm3-3, OUT1, NONE);
-		PIN_SLP(gpm3-4, OUT0, DOWN);
-		PIN_SLP(gpm3-5, PREV, NONE);
-		PIN_SLP(gpm3-6, PREV, NONE);
-		PIN_SLP(gpm3-7, OUT0, NONE);
-
-		PIN_SLP(gpm4-0, INPUT, NONE);
-		PIN_SLP(gpm4-1, INPUT, NONE);
-		PIN_SLP(gpm4-2, INPUT, DOWN);
-		PIN_SLP(gpm4-3, INPUT, DOWN);
-		PIN_SLP(gpm4-4, PREV, NONE);
-		PIN_SLP(gpm4-5, OUT0, NONE);
-		PIN_SLP(gpm4-6, OUT0, NONE);
-		PIN_SLP(gpm4-7, INPUT, DOWN);
-
-		PIN_SLP(gpy0-0, INPUT, DOWN);
-		PIN_SLP(gpy0-1, INPUT, DOWN);
-		PIN_SLP(gpy0-2, INPUT, NONE);
-		PIN_SLP(gpy0-3, INPUT, NONE);
-		PIN_SLP(gpy0-4, INPUT, NONE);
-		PIN_SLP(gpy0-5, INPUT, NONE);
-
-		PIN_SLP(gpy1-0, INPUT, DOWN);
-		PIN_SLP(gpy1-1, INPUT, DOWN);
-		PIN_SLP(gpy1-2, INPUT, DOWN);
-		PIN_SLP(gpy1-3, INPUT, DOWN);
-
-		PIN_SLP(gpy2-0, PREV, NONE);
-		PIN_SLP(gpy2-1, INPUT, DOWN);
-		PIN_SLP(gpy2-2, INPUT, NONE);
-		PIN_SLP(gpy2-3, INPUT, NONE);
-		PIN_SLP(gpy2-4, INPUT, NONE);
-		PIN_SLP(gpy2-5, INPUT, NONE);
-
-		PIN_SLP(gpy3-0, INPUT, DOWN);
-		PIN_SLP(gpy3-1, INPUT, DOWN);
-		PIN_SLP(gpy3-2, INPUT, DOWN);
-		PIN_SLP(gpy3-3, INPUT, DOWN);
-		PIN_SLP(gpy3-4, INPUT, DOWN);
-		PIN_SLP(gpy3-5, INPUT, DOWN);
-		PIN_SLP(gpy3-6, INPUT, DOWN);
-		PIN_SLP(gpy3-7, INPUT, DOWN);
-
-		PIN_SLP(gpy4-0, INPUT, DOWN);
-		PIN_SLP(gpy4-1, INPUT, DOWN);
-		PIN_SLP(gpy4-2, INPUT, DOWN);
-		PIN_SLP(gpy4-3, INPUT, DOWN);
-		PIN_SLP(gpy4-4, INPUT, DOWN);
-		PIN_SLP(gpy4-5, INPUT, DOWN);
-		PIN_SLP(gpy4-6, INPUT, DOWN);
-		PIN_SLP(gpy4-7, INPUT, DOWN);
-
-		PIN_SLP(gpy5-0, INPUT, DOWN);
-		PIN_SLP(gpy5-1, INPUT, DOWN);
-		PIN_SLP(gpy5-2, INPUT, DOWN);
-		PIN_SLP(gpy5-3, INPUT, DOWN);
-		PIN_SLP(gpy5-4, INPUT, DOWN);
-		PIN_SLP(gpy5-5, INPUT, DOWN);
-		PIN_SLP(gpy5-6, INPUT, DOWN);
-		PIN_SLP(gpy5-7, INPUT, DOWN);
-
-		PIN_SLP(gpy6-0, INPUT, DOWN);
-		PIN_SLP(gpy6-1, INPUT, DOWN);
-		PIN_SLP(gpy6-2, INPUT, DOWN);
-		PIN_SLP(gpy6-3, INPUT, DOWN);
-		PIN_SLP(gpy6-4, INPUT, DOWN);
-		PIN_SLP(gpy6-5, INPUT, DOWN);
-		PIN_SLP(gpy6-6, INPUT, DOWN);
-		PIN_SLP(gpy6-7, INPUT, DOWN);
-	};
-};
-
-&pinctrl_2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep2>;
-
-	sleep2: sleep-state {
-		PIN_SLP(gpz-0, INPUT, DOWN);
-		PIN_SLP(gpz-1, INPUT, DOWN);
-		PIN_SLP(gpz-2, INPUT, DOWN);
-		PIN_SLP(gpz-3, INPUT, DOWN);
-		PIN_SLP(gpz-4, INPUT, DOWN);
-		PIN_SLP(gpz-5, INPUT, DOWN);
-		PIN_SLP(gpz-6, INPUT, DOWN);
-	};
-};
-
-&pinctrl_3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep3>;
-
-	sleep3: sleep-state {
-		PIN_SLP(gpv0-0, INPUT, DOWN);
-		PIN_SLP(gpv0-1, INPUT, DOWN);
-		PIN_SLP(gpv0-2, INPUT, DOWN);
-		PIN_SLP(gpv0-3, INPUT, DOWN);
-		PIN_SLP(gpv0-4, INPUT, DOWN);
-		PIN_SLP(gpv0-5, INPUT, DOWN);
-		PIN_SLP(gpv0-6, INPUT, DOWN);
-		PIN_SLP(gpv0-7, INPUT, DOWN);
-
-		PIN_SLP(gpv1-0, INPUT, DOWN);
-		PIN_SLP(gpv1-1, INPUT, DOWN);
-		PIN_SLP(gpv1-2, INPUT, DOWN);
-		PIN_SLP(gpv1-3, INPUT, DOWN);
-		PIN_SLP(gpv1-4, INPUT, DOWN);
-		PIN_SLP(gpv1-5, INPUT, DOWN);
-		PIN_SLP(gpv1-6, INPUT, DOWN);
-		PIN_SLP(gpv1-7, INPUT, DOWN);
-
-		PIN_SLP(gpv2-0, INPUT, DOWN);
-		PIN_SLP(gpv2-1, INPUT, DOWN);
-		PIN_SLP(gpv2-2, INPUT, DOWN);
-		PIN_SLP(gpv2-3, INPUT, DOWN);
-		PIN_SLP(gpv2-4, INPUT, DOWN);
-		PIN_SLP(gpv2-5, INPUT, DOWN);
-		PIN_SLP(gpv2-6, INPUT, DOWN);
-		PIN_SLP(gpv2-7, INPUT, DOWN);
-
-		PIN_SLP(gpv3-0, INPUT, DOWN);
-		PIN_SLP(gpv3-1, INPUT, DOWN);
-		PIN_SLP(gpv3-2, INPUT, DOWN);
-		PIN_SLP(gpv3-3, INPUT, DOWN);
-		PIN_SLP(gpv3-4, INPUT, DOWN);
-		PIN_SLP(gpv3-5, INPUT, DOWN);
-		PIN_SLP(gpv3-6, INPUT, DOWN);
-		PIN_SLP(gpv3-7, INPUT, DOWN);
-
-		PIN_SLP(gpv4-0, INPUT, DOWN);
-		PIN_SLP(gpv4-1, INPUT, DOWN);
-	};
-};
-
-&pmu_system_controller {
-	assigned-clocks = <&pmu_system_controller 0>;
-	assigned-clock-parents = <&clock CLK_XUSBXTI>;
-};
-
-&pwm {
-	pinctrl-0 = <&pwm1_out>;
-	pinctrl-names = "default";
-	samsung,pwm-outputs = <1>;
-	status = "okay";
-};
-
-&rtc {
-	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-	status = "okay";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
-	pinctrl-names = "default";
-	vmmc-supply = <&ldo21_reg>;
-	status = "okay";
-};
-
-&sdhci_3 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	non-removable;
-	bus-width = <4>;
-	mmc-pwrseq = <&wlan_pwrseq>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_wifi>;
-	status = "okay";
-
-	wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <0x1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake>;
-		interrupt-parent = <&gpx2>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-	};
-};
-
-&serial_0 {
-	pinctrl-0 = <&uart0_data &uart0_fctl>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4330-bt";
-		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
-		pinctrl-names = "default";
-
-		max-speed = <2000000>;
-		shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-		clocks = <&max77686 MAX77686_CLK_PMIC>;
-		clock-names = "lpo";
-	};
-};
-
-&serial_2 {
-	pinctrl-0 = <&uart_sel>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&tmu {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
deleted file mode 100644
index 8ab31c3daa481..0000000000000
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ /dev/null
@@ -1,979 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- */
-
-#include "exynos-pinctrl.h"
-
-#define PIN_SLP(_pin, _mode, _pull)					\
-	pin- ## _pin {							\
-		samsung,pins = #_pin;					\
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
-	}
-
-&pinctrl_0 {
-	gpa0: gpa0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf2: gpf2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf3: gpf3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj0: gpj0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj1: gpj1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data-pins {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart0_fctl: uart0-fctl-pins {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_data: uart1-data-pins {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_fctl: uart1-fctl-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c2_bus: i2c2-bus-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_data: uart2-data-pins {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_fctl: uart2-fctl-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart_audio_a: uart-audio-a-pins {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c3_bus: i2c3-bus-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart3_data: uart3-data-pins {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart_audio_b: uart-audio-b-pins {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi0_bus: spi0-bus-pins {
-		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c4_bus: i2c4-bus-pins {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi1_bus: spi1-bus-pins {
-		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c5_bus: i2c5-bus-pins {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s1_bus: i2s1-bus-pins {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm1_bus: pcm1-bus-pins {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	ac97_bus: ac97-bus-pins {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s2_bus: i2s2-bus-pins {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm2_bus: pcm2-bus-pins {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spdif_bus: spdif-bus-pins {
-		samsung,pins = "gpc1-0", "gpc1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c6_bus: i2c6-bus-pins {
-		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi2_bus: spi2-bus-pins {
-		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm0_out: pwm0-out-pins {
-		samsung,pins = "gpd0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm1_out: pwm1-out-pins {
-		samsung,pins = "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_ctrl: lcd-ctrl-pins {
-		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c7_bus: i2c7-bus-pins {
-		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm2_out: pwm2-out-pins {
-		samsung,pins = "gpd0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm3_out: pwm3-out-pins {
-		samsung,pins = "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c0_bus: i2c0-bus-pins {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	mipi0_clk: mipi0-clk-pins {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c1_bus: i2c1-bus-pins {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	mipi1_clk: mipi1-clk-pins {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_clk: lcd-clk-pins {
-		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data16: lcd-data-width16-pins {
-		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
-				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
-				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data18: lcd-data-width18-pins {
-		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
-				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
-				"gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data24: lcd-data-width24-pins {
-		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_ldi: lcd-ldi-pins {
-		samsung,pins = "gpf3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_a_io: cam-port-a-io-pins {
-		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_a_clk_active: cam-port-a-clk-active-pins {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	gpk0: gpk0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk1: gpk1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk2: gpk2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk3: gpk3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl0: gpl0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl1: gpl1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl2: gpl2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm0: gpm0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm1: gpm1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm2: gpm2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm3: gpm3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm4: gpm4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpy0: gpy0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy1: gpy1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy2: gpy2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy3: gpy3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy4: gpy4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy5: gpy5-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy6: gpy6-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpx0: gpx0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx1: gpx1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx2: gpx2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk-pins {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cmd: sd0-cmd-pins {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cd: sd0-cd-pins {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus1: sd0-bus-width1-pins {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus4: sd0-bus-width4-pins {
-		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus8: sd0-bus-width8-pins {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_clk: sd4-clk-pins {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_cmd: sd4-cmd-pins {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_cd: sd4-cd-pins {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus1: sd4-bus-width1-pins {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus4: sd4-bus-width4-pins {
-		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus8: sd4-bus-width8-pins {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_clk: sd1-clk-pins {
-		samsung,pins = "gpk1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cmd: sd1-cmd-pins {
-		samsung,pins = "gpk1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cd: sd1-cd-pins {
-		samsung,pins = "gpk1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus1: sd1-bus-width1-pins {
-		samsung,pins = "gpk1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus4: sd1-bus-width4-pins {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_clk: sd2-clk-pins {
-		samsung,pins = "gpk2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cmd: sd2-cmd-pins {
-		samsung,pins = "gpk2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cd: sd2-cd-pins {
-		samsung,pins = "gpk2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus1: sd2-bus-width1-pins {
-		samsung,pins = "gpk2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus4: sd2-bus-width4-pins {
-		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus8: sd2-bus-width8-pins {
-		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_clk: sd3-clk-pins {
-		samsung,pins = "gpk3-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_cmd: sd3-cmd-pins {
-		samsung,pins = "gpk3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_cd: sd3-cd-pins {
-		samsung,pins = "gpk3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_bus1: sd3-bus-width1-pins {
-		samsung,pins = "gpk3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_bus4: sd3-bus-width4-pins {
-		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_b_io: cam-port-b-io-pins {
-		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
-				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_b_clk_active: cam-port-b-clk-active-pins {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint0: ext-int0-pins {
-		samsung,pins = "gpx0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint8: ext-int8-pins {
-		samsung,pins = "gpx1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint15: ext-int15-pins {
-		samsung,pins = "gpx1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint16: ext-int16-pins {
-		samsung,pins = "gpx2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint31: ext-int31-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_i2c0: fimc-is-i2c0-pins {
-		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_i2c1: fimc-is-i2c1-pins {
-		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_uart: fimc-is-uart-pins {
-		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	hdmi_cec: hdmi-cec-pins {
-		samsung,pins = "gpx3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_2 {
-	gpz: gpz-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	i2s0_bus: i2s0-bus-pins {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm0_bus: pcm0-bus-pins {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_3 {
-	gpv0: gpv0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv1: gpv1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv2: gpv2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv3: gpv3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv4: gpv4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	c2c_bus: c2c-bus-pins {
-		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-				"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-				"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-				"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
-				"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-				"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-				"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-				"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
-				"gpv4-0", "gpv4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
deleted file mode 100644
index 7f187a3dedccb..0000000000000
--- a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos4412 PPMU common device tree
- *
- * Copyright (C) 2015 Samsung Electronics
- * Author: Chanwoo Choi <cw00.choi@samsung.com>
- */
-
-&ppmu_dmc0 {
-	status = "okay";
-
-	events {
-		ppmu_dmc0_3: ppmu-event3-dmc0 {
-			event-name = "ppmu-event3-dmc0";
-		};
-	};
-};
-
-&ppmu_dmc1 {
-	status = "okay";
-
-	events {
-		ppmu_dmc1_3: ppmu-event3-dmc1 {
-			event-name = "ppmu-event3-dmc1";
-		};
-	};
-};
-
-&ppmu_leftbus {
-	status = "okay";
-
-	events {
-		ppmu_leftbus_3: ppmu-event3-leftbus {
-			event-name = "ppmu-event3-leftbus";
-		};
-	};
-};
-
-&ppmu_rightbus {
-	status = "okay";
-
-	events {
-		ppmu_rightbus_3: ppmu-event3-rightbus {
-			event-name = "ppmu-event3-rightbus";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi
deleted file mode 100644
index 3731a225f7791..0000000000000
--- a/arch/arm/boot/dts/exynos4412-prime.dtsi
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 Prime SoC device tree source
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/*
- * Exynos4412 Prime SoC revision supports higher CPU frequencies than
- * non-Prime version.  Therefore we need to update OPPs table and
- * thermal maps accordingly.
- */
-
-&cpu0_opp_1500 {
-	/delete-property/turbo-mode;
-};
-
-&cpu0_opp_table {
-	opp-1600000000 {
-		opp-hz = /bits/ 64 <1600000000>;
-		opp-microvolt = <1350000>;
-		clock-latency-ns = <200000>;
-	};
-	opp-1704000000 {
-		opp-hz = /bits/ 64 <1704000000>;
-		opp-microvolt = <1350000>;
-		clock-latency-ns = <200000>;
-	};
-};
-
-&cooling_map0 {
-	cooling-device = <&cpu0 9 9>, <&cpu1 9 9>,
-			 <&cpu2 9 9>, <&cpu3 9 9>;
-};
-
-&cooling_map1 {
-	cooling-device = <&cpu0 15 15>, <&cpu1 15 15>,
-			 <&cpu2 15 15>, <&cpu3 15 15>;
-};
-
-&gpu_opp_table {
-	opp-533000000 {
-		opp-hz = /bits/ 64 <533000000>;
-		opp-microvolt = <1075000>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
deleted file mode 100644
index 715dfcba14174..0000000000000
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 based SMDK board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's SMDK4412 board which is based on
- * Samsung's Exynos4412 SoC.
- */
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-#include "exynos-mfc-reserved-memory.dtsi"
-
-/ {
-	model = "Samsung SMDK evaluation board based on Exynos4412";
-	compatible = "samsung,smdk4412", "samsung,exynos4412", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	aliases {
-		mmc0 = &sdhci_2;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
-		stdout-path = "serial1:115200n8";
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-
-		pmic_ap_clk: pmic-ap-clk {
-			/* Workaround for missing clock on PMIC */
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-};
-
-&cpu_thermal {
-	cooling-maps {
-		cooling_map0: map0 {
-			/* Corresponds to 800MHz at freq_table */
-			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
-					 <&cpu2 7 7>, <&cpu3 7 7>;
-		};
-		cooling_map1: map1 {
-			/* Corresponds to 200MHz at freq_table */
-			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
-					 <&cpu2 13 13>, <&cpu3 13 13>;
-		};
-	};
-};
-
-&keypad {
-	samsung,keypad-num-rows = <3>;
-	samsung,keypad-num-columns = <8>;
-	linux,keypad-no-autorepeat;
-	wakeup-source;
-	pinctrl-0 = <&keypad_rows &keypad_cols>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	key-1 {
-		keypad,row = <1>;
-		keypad,column = <3>;
-		linux,code = <2>;
-	};
-
-	key-2 {
-		keypad,row = <1>;
-		keypad,column = <4>;
-		linux,code = <3>;
-	};
-
-	key-3 {
-		keypad,row = <1>;
-		keypad,column = <5>;
-		linux,code = <4>;
-	};
-
-	key-4 {
-		keypad,row = <1>;
-		keypad,column = <6>;
-		linux,code = <5>;
-	};
-
-	key-5 {
-		keypad,row = <1>;
-		keypad,column = <7>;
-		linux,code = <6>;
-	};
-
-	key-A {
-		keypad,row = <2>;
-		keypad,column = <6>;
-		linux,code = <30>;
-	};
-
-	key-B {
-		keypad,row = <2>;
-		keypad,column = <7>;
-		linux,code = <48>;
-	};
-
-	key-C {
-		keypad,row = <0>;
-		keypad,column = <5>;
-		linux,code = <46>;
-	};
-
-	key-D {
-		keypad,row = <2>;
-		keypad,column = <5>;
-		linux,code = <32>;
-	};
-
-	key-E {
-		keypad,row = <0>;
-		keypad,column = <7>;
-		linux,code = <18>;
-	};
-};
-
-&pinctrl_1 {
-	keypad_rows: keypad-rows-pins {
-		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	keypad_cols: keypad-cols-pins {
-		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
-			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&rtc {
-	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
deleted file mode 100644
index 5a2dcdc5c28b8..0000000000000
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ /dev/null
@@ -1,160 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * FriendlyARM's Exynos4412 based TINY4412 board device tree source
- *
- * Copyright (c) 2013 Alex Ling <kasimling@gmail.com>
- *
- * Device tree source file for FriendlyARM's TINY4412 board which is based on
- * Samsung's Exynos4412 SoC.
- */
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "FriendlyARM TINY4412 board based on Exynos4412";
-	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		mmc0 = &sdhci_2;
-	};
-
-	chosen {
-		stdout-path = &serial_0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "led1";
-			function = LED_FUNCTION_HEARTBEAT;
-			gpios = <&gpm4 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&gpm4 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "led3";
-			gpios = <&gpm4 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led4 {
-			label = "led4";
-			function = LED_FUNCTION_DISK_ACTIVITY;
-			gpios = <&gpm4 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-
-		pmic_ap_clk: pmic-ap-clk {
-			/* Workaround for missing clock on PMIC */
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	panel {
-		compatible = "innolux,at070tn92";
-		power-supply = <&vddq_lcd>;
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&lcdc_output>;
-			};
-		};
-	};
-
-	vddq_lcd: regulator-vddq-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "vddq-lcd";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-};
-
-&cpu_thermal {
-	cooling-maps {
-		cooling_map0: map0 {
-			/* Corresponds to 800MHz at freq_table */
-			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
-					 <&cpu2 7 7>, <&cpu3 7 7>;
-		};
-		cooling_map1: map1 {
-			/* Corresponds to 200MHz at freq_table */
-			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
-					 <&cpu2 13 13>, <&cpu3 13 13>;
-		};
-	};
-};
-
-&fimd {
-	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
-	pinctrl-names = "default";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	port@3 {
-		reg = <3>;
-		lcdc_output: endpoint {
-			remote-endpoint = <&panel_input>;
-		};
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
deleted file mode 100644
index 3c2d2a7836da8..0000000000000
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 based Trats 2 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Trats 2 board which is based on
- * Samsung's Exynos4412 SoC.
- */
-
-/dts-v1/;
-#include "exynos4412-galaxy-s3.dtsi"
-
-/ {
-	model = "Samsung Trats 2 based on Exynos4412";
-	compatible = "samsung,trats2", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
-	chassis-type = "handset";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
-		stdout-path = "serial2:115200n8";
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
deleted file mode 100644
index 82a36fb5ee8b7..0000000000000
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ /dev/null
@@ -1,819 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
- * nodes can be added to this file.
- */
-
-#include "exynos4.dtsi"
-
-#include "exynos4-cpu-thermal.dtsi"
-
-/ {
-	compatible = "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		fimc-lite0 = &fimc_lite_0;
-		fimc-lite1 = &fimc_lite_1;
-	};
-
-	bus_acp: bus-acp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_ACP>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_acp_opp_table>;
-		status = "disabled";
-
-		bus_acp_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-	};
-
-	bus_c2c: bus-c2c {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_C2C>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_dmc_opp_table>;
-		status = "disabled";
-	};
-
-	bus_dmc: bus-dmc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_DMC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_dmc_opp_table>;
-		samsung,data-clock-ratio = <4>;
-		#interconnect-cells = <0>;
-		status = "disabled";
-	};
-
-	bus_display: bus-display {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK160>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_display_opp_table>;
-		interconnects = <&bus_leftbus &bus_dmc>;
-		#interconnect-cells = <0>;
-		status = "disabled";
-
-		bus_display_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-	};
-
-	bus_fsys: bus-fsys {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK133>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_fsys_opp_table>;
-		status = "disabled";
-
-		bus_fsys_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-	};
-
-	bus_leftbus: bus-leftbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_GDL>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		interconnects = <&bus_dmc>;
-		#interconnect-cells = <0>;
-		status = "disabled";
-	};
-
-	bus_mfc: bus-mfc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_SCLK_MFC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_peri: bus-peri {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK100>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_peri_opp_table>;
-		status = "disabled";
-
-		bus_peri_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-	};
-
-	bus_rightbus: bus-rightbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_GDR>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-				core2 {
-					cpu = <&cpu2>;
-				};
-				core3 {
-					cpu = <&cpu3>;
-				};
-			};
-		};
-
-		cpu0: cpu@a00 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa00>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu1: cpu@a01 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa01>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu2: cpu@a02 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa02>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu3: cpu@a03 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa03>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	cpu0_opp_table: opp-table-0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <900000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <900000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <925000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <950000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <975000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = <987500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <200000>;
-			opp-suspend;
-		};
-		opp-900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = <1037500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1087500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1137500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1187500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1250000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1287500>;
-			clock-latency-ns = <200000>;
-		};
-		cpu0_opp_1500: opp-1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1350000>;
-			clock-latency-ns = <200000>;
-			turbo-mode;
-		};
-	};
-
-	bus_dmc_opp_table: opp-table-1 {
-		compatible = "operating-points-v2";
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-267000000 {
-			opp-hz = /bits/ 64 <267000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <1050000>;
-			opp-suspend;
-		};
-	};
-
-	bus_leftbus_opp_table: opp-table-2 {
-		compatible = "operating-points-v2";
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <925000>;
-		};
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <1000000>;
-			opp-suspend;
-		};
-	};
-
-	soc: soc {
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_1: pinctrl@11000000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x11000000 0x1000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakup_eint: wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_2: pinctrl@3860000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x03860000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 0>;
-		};
-
-		pinctrl_3: pinctrl@106e0000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x106e0000 0x1000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		sram@2020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x40000>;
-
-			smp-sram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sram@2f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x2f000 0x1000>;
-			};
-		};
-
-		pd_isp: power-domain@10023ca0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023ca0 0x20>;
-			#power-domain-cells = <0>;
-			label = "ISP";
-		};
-
-		l2c: cache-controller@10502000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x10502000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			prefetch-data = <1>;
-			prefetch-instr = <1>;
-			arm,tag-latency = <2 2 1>;
-			arm,data-latency = <3 2 1>;
-			arm,double-linefill = <1>;
-			arm,double-linefill-incr = <0>;
-			arm,double-linefill-wrap = <1>;
-			arm,prefetch-drop = <1>;
-			arm,prefetch-offset = <7>;
-		};
-
-		clock: clock-controller@10030000 {
-			compatible = "samsung,exynos4412-clock";
-			reg = <0x10030000 0x18000>;
-			#clock-cells = <1>;
-		};
-
-		isp_clock: clock-controller@10048000 {
-			compatible = "samsung,exynos4412-isp-clock";
-			reg = <0x10048000 0x1000>;
-			#clock-cells = <1>;
-			power-domains = <&pd_isp>;
-			clocks = <&clock CLK_ACLK200>,
-				 <&clock CLK_ACLK400_MCUISP>;
-			clock-names = "aclk200", "aclk400_mcuisp";
-		};
-
-		timer@10050000 {
-			compatible = "samsung,exynos4412-mct";
-			reg = <0x10050000 0x800>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-			interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-					      <&combiner 12 5>,
-					      <&combiner 12 6>,
-					      <&combiner 12 7>,
-					      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		watchdog: watchdog@10060000 {
-			compatible = "samsung,exynos5250-wdt";
-			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_WDT>;
-			clock-names = "watchdog";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-		};
-
-		adc: adc@126c0000 {
-			compatible = "samsung,exynos4212-adc";
-			reg = <0x126c0000 0x100>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 3>;
-			clocks = <&clock CLK_TSADC>;
-			clock-names = "adc";
-			#io-channel-cells = <1>;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		g2d: g2d@10800000 {
-			compatible = "samsung,exynos4212-g2d";
-			reg = <0x10800000 0x1000>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-			clock-names = "sclk_fimg2d", "fimg2d";
-			iommus = <&sysmmu_g2d>;
-		};
-
-		mshc_0: mmc@12550000 {
-			compatible = "samsung,exynos4412-dw-mshc";
-			reg = <0x12550000 0x1000>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			fifo-depth = <0x80>;
-			clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
-			clock-names = "biu", "ciu";
-			status = "disabled";
-		};
-
-		sysmmu_g2d: sysmmu@10a40000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10a40000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 7>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_isp: sysmmu@12260000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12260000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 2>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_ISP>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_drc: sysmmu@12270000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12270000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 3>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_DRC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_fd: sysmmu@122a0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122a0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 4>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_FD>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_mcuctl: sysmmu@122b0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122b0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 5>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite0: sysmmu@123b0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123b0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 0>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu", "master";
-			clocks = <&isp_clock CLK_ISP_SMMU_LITE0>,
-				 <&isp_clock CLK_ISP_FIMC_LITE0>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite1: sysmmu@123c0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123c0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 1>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu", "master";
-			clocks = <&isp_clock CLK_ISP_SMMU_LITE1>,
-				 <&isp_clock CLK_ISP_FIMC_LITE1>;
-			#iommu-cells = <0>;
-		};
-	};
-};
-
-&combiner {
-	samsung,combiner-nr = <20>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&camera {
-	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-
-	/* fimc_[0-3] are configured outside, under phandles */
-	fimc_lite_0: fimc-lite@12390000 {
-		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x12390000 0x1000>;
-		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
-		clock-names = "flite";
-		iommus = <&sysmmu_fimc_lite0>;
-		status = "disabled";
-	};
-
-	fimc_lite_1: fimc-lite@123a0000 {
-		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123a0000 0x1000>;
-		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
-		clock-names = "flite";
-		iommus = <&sysmmu_fimc_lite1>;
-		status = "disabled";
-	};
-
-	fimc_is: fimc-is@12000000 {
-		compatible = "samsung,exynos4212-fimc-is";
-		reg = <0x12000000 0x260000>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
-			 <&isp_clock CLK_ISP_FIMC_LITE1>,
-			 <&isp_clock CLK_ISP_PPMUISPX>,
-			 <&isp_clock CLK_ISP_PPMUISPMX>,
-			 <&isp_clock CLK_ISP_FIMC_ISP>,
-			 <&isp_clock CLK_ISP_FIMC_DRC>,
-			 <&isp_clock CLK_ISP_FIMC_FD>,
-			 <&isp_clock CLK_ISP_MCUISP>,
-			 <&isp_clock CLK_ISP_GICISP>,
-			 <&isp_clock CLK_ISP_MCUCTL_ISP>,
-			 <&isp_clock CLK_ISP_PWM_ISP>,
-			 <&isp_clock CLK_ISP_DIV_ISP0>,
-			 <&isp_clock CLK_ISP_DIV_ISP1>,
-			 <&isp_clock CLK_ISP_DIV_MCUISP0>,
-			 <&isp_clock CLK_ISP_DIV_MCUISP1>,
-			 <&clock CLK_MOUT_MPLL_USER_T>,
-			 <&clock CLK_ACLK200>,
-			 <&clock CLK_ACLK400_MCUISP>,
-			 <&clock CLK_DIV_ACLK200>,
-			 <&clock CLK_DIV_ACLK400_MCUISP>,
-			 <&clock CLK_UART_ISP_SCLK>;
-		clock-names = "lite0", "lite1", "ppmuispx",
-			      "ppmuispmx", "isp",
-			      "drc", "fd", "mcuisp",
-			      "gicisp", "mcuctl_isp", "pwm_isp",
-			      "ispdiv0", "ispdiv1", "mcuispdiv0",
-			      "mcuispdiv1", "mpll", "aclk200",
-			      "aclk400mcuisp", "div_aclk200",
-			      "div_aclk400mcuisp", "uart";
-		iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
-			 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
-		iommu-names = "isp", "drc", "fd", "mcuctl";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		status = "disabled";
-
-		pmu@10020000 {
-			reg = <0x10020000 0x3000>;
-		};
-
-		i2c1_isp: i2c-isp@12140000 {
-			compatible = "samsung,exynos4212-i2c-isp";
-			reg = <0x12140000 0x100>;
-			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
-			clock-names = "i2c_isp";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&exynos_usbphy {
-	compatible = "samsung,exynos4x12-usb2-phy";
-	samsung,sysreg-phandle = <&sys_reg>;
-};
-
-&fimc_0 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_1 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_2 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
-	samsung,cam-if;
-};
-
-&fimc_3 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <1920 8192 1366 1920>;
-	samsung,rotators = <0>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
-};
-
-&gic {
-	cpu-offset = <0x4000>;
-};
-
-&gpu {
-	interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "gp",
-			  "gpmmu",
-			  "pp0",
-			  "ppmmu0",
-			  "pp1",
-			  "ppmmu1",
-			  "pp2",
-			  "ppmmu2",
-			  "pp3",
-			  "ppmmu3",
-			  "pmu";
-	operating-points-v2 = <&gpu_opp_table>;
-
-	gpu_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-			opp-microvolt = <875000>;
-		};
-		opp-267000000 {
-			opp-hz = /bits/ 64 <267000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-350000000 {
-			opp-hz = /bits/ 64 <350000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-440000000 {
-			opp-hz = /bits/ 64 <440000000>;
-			opp-microvolt = <1025000>;
-		};
-	};
-};
-
-&hdmi {
-	compatible = "samsung,exynos4212-hdmi";
-};
-
-&jpeg_codec {
-	compatible = "samsung,exynos4212-jpeg";
-};
-
-&rotator {
-	compatible = "samsung,exynos4212-rotator";
-};
-
-&mixer {
-	compatible = "samsung,exynos4212-mixer";
-	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
-	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
-	interconnects = <&bus_display &bus_dmc>;
-};
-
-&pmu {
-	interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
-	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	status = "okay";
-};
-
-&pmu_system_controller {
-	compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon";
-	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-			"clkout4", "clkout8", "clkout9";
-	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
-	#clock-cells = <1>;
-};
-
-&tmu {
-	compatible = "samsung,exynos4412-tmu";
-	interrupt-parent = <&combiner>;
-	interrupts = <2 4>;
-	reg = <0x100c0000 0x100>;
-	clocks = <&clock CLK_TMU_APBIF>;
-	clock-names = "tmu_apbif";
-	status = "disabled";
-};
-
-#include "exynos4412-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
deleted file mode 100644
index 48e43b6b3213a..0000000000000
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ /dev/null
@@ -1,230 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos5 SoC series common device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular
- * SoCs from Exynos5 series can include this file and provide values for SoCs
- * specfic bindings.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		serial2 = &serial_2;
-		serial3 = &serial_3;
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		chipid: chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		sromc: memory-controller@12250000 {
-			compatible = "samsung,exynos4210-srom";
-			reg = <0x12250000 0x14>;
-		};
-
-		combiner: interrupt-controller@10440000 {
-			compatible = "samsung,exynos4210-combiner";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			samsung,combiner-nr = <32>;
-			reg = <0x10440000 0x1000>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,gic-400", "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x10481000 0x1000>,
-				<0x10482000 0x2000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <GIC_PPI 9
-					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		sysreg_system_controller: syscon@10050000 {
-			compatible = "samsung,exynos5-sysreg", "syscon";
-			reg = <0x10050000 0x5000>;
-		};
-
-		serial_0: serial@12c00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12c00000 0x100>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		serial_1: serial@12c10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12c10000 0x100>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		serial_2: serial@12c20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12c20000 0x100>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		serial_3: serial@12c30000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12c30000 0x100>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		i2c_0: i2c@12c60000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12c60000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			samsung,sysreg-phandle = <&sysreg_system_controller>;
-			status = "disabled";
-		};
-
-		i2c_1: i2c@12c70000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12c70000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			samsung,sysreg-phandle = <&sysreg_system_controller>;
-			status = "disabled";
-		};
-
-		i2c_2: i2c@12c80000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12c80000 0x100>;
-			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			samsung,sysreg-phandle = <&sysreg_system_controller>;
-			status = "disabled";
-		};
-
-		i2c_3: i2c@12c90000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12c90000 0x100>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			samsung,sysreg-phandle = <&sysreg_system_controller>;
-			status = "disabled";
-		};
-
-		pwm: pwm@12dd0000 {
-			compatible = "samsung,exynos4210-pwm";
-			reg = <0x12dd0000 0x100>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-			#pwm-cells = <3>;
-		};
-
-		rtc: rtc@101e0000 {
-			compatible = "samsung,s3c6410-rtc";
-			reg = <0x101e0000 0x100>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		fimd: fimd@14400000 {
-			compatible = "samsung,exynos5250-fimd";
-			interrupt-parent = <&combiner>;
-			reg = <0x14400000 0x40000>;
-			interrupt-names = "fifo", "vsync", "lcd_sys";
-			interrupts = <18 4>, <18 5>, <18 6>;
-			samsung,sysreg = <&sysreg_system_controller>;
-			status = "disabled";
-		};
-
-		dp: dp-controller@145b0000 {
-			compatible = "samsung,exynos5-dp";
-			reg = <0x145b0000 0x1000>;
-			interrupts = <10 3>;
-			interrupt-parent = <&combiner>;
-			status = "disabled";
-		};
-
-		sss: sss@10830000 {
-			compatible = "samsung,exynos4210-secss";
-			reg = <0x10830000 0x300>;
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		prng: rng@10830400 {
-			compatible = "samsung,exynos5250-prng";
-			reg = <0x10830400 0x200>;
-		};
-
-		trng: rng@10830600 {
-			compatible = "samsung,exynos5250-trng";
-			reg = <0x10830600 0x100>;
-		};
-
-		g2d: g2d@10850000 {
-			compatible = "samsung,exynos5250-g2d";
-			reg = <0x10850000 0x1000>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
deleted file mode 100644
index d586189966da5..0000000000000
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ /dev/null
@@ -1,643 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos5250 based Arndale board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/sound/samsung-i2s.h>
-#include "exynos5250.dtsi"
-
-/ {
-	model = "Insignal Arndale evaluation board based on Exynos5250";
-	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		mmc0 = &mmc_0;
-		mmc1 = &mmc_2;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-menu {
-			label = "SW-TACT2";
-			gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-			wakeup-source;
-		};
-
-		key-home {
-			label = "SW-TACT3";
-			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			wakeup-source;
-		};
-
-		key-up {
-			label = "SW-TACT4";
-			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_UP>;
-			wakeup-source;
-		};
-
-		key-down {
-			label = "SW-TACT5";
-			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_DOWN>;
-			wakeup-source;
-		};
-
-		key-back {
-			label = "SW-TACT6";
-			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			wakeup-source;
-		};
-
-		key-wakeup {
-			label = "SW-TACT7";
-			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
-	};
-
-	/*
-	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
-	 * controllers. Lets use software I2C over GPIO pins as a workaround.
-	 */
-	i2c_ddc: i2c-10 {
-		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_gpio_bus>;
-		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-	};
-
-	panel: panel {
-		compatible = "boe,hv070wsa-100";
-		power-supply = <&vcc_3v3_reg>;
-		enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
-		port {
-			panel_ep: endpoint {
-				remote-endpoint = <&bridge_out_ep>;
-			};
-		};
-	};
-
-	main_dc_reg: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "MAIN_DC";
-		regulator-always-on;
-	};
-
-	mmc_reg: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_MMC";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-
-	reg_hdmi_en: regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "hdmi-en";
-		regulator-always-on;
-	};
-
-	vcc_1v2_reg: regulator-3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V2";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-always-on;
-	};
-
-	vcc_1v8_reg: regulator-4 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	vcc_3v3_reg: regulator-5 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "samsung,arndale-wm1811";
-		samsung,audio-cpu = <&i2s0>;
-		samsung,audio-codec = <&wm1811>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	// SMSC USB3503 connected in hardware only mode as a PHY
-	usb_hub: usb-hub {
-		compatible = "smsc,usb3503a";
-
-		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-		connect-gpios = <&gpd1 7 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&clock {
-	assigned-clocks = <&clock CLK_FOUT_EPLL>;
-	assigned-clock-rates = <49152000>;
-};
-
-&clock_audss {
-	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&dsi_0 {
-	vddcore-supply = <&ldo8_reg>;
-	vddio-supply = <&ldo10_reg>;
-	samsung,pll-clock-frequency = <24000000>;
-	samsung,burst-clock-frequency = <320000000>;
-	samsung,esc-clock-frequency = <10000000>;
-	status = "okay";
-
-	bridge@0 {
-		reg = <0>;
-		compatible = "toshiba,tc358764";
-		vddc-supply = <&vcc_1v2_reg>;
-		vddio-supply = <&vcc_1v8_reg>;
-		vddlvds-supply = <&vcc_3v3_reg>;
-		reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@1 {
-				reg = <1>;
-				bridge_out_ep: endpoint {
-					remote-endpoint = <&panel_ep>;
-				};
-			};
-		};
-	};
-};
-
-&fimd {
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd>;
-	status = "okay";
-	ddc = <&i2c_ddc>;
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	vdd_osc-supply = <&ldo10_reg>;
-	vdd_pll-supply = <&ldo8_reg>;
-	vdd-supply = <&ldo8_reg>;
-};
-
-&i2c_0 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <20000>;
-	samsung,i2c-slave-addr = <0x66>;
-
-	pmic@66 {
-		compatible = "samsung,s5m8767-pmic";
-		reg = <0x66>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&s5m8767_irq>;
-		wakeup-source;
-
-		vinb1-supply = <&main_dc_reg>;
-		vinb2-supply = <&main_dc_reg>;
-		vinb3-supply = <&main_dc_reg>;
-		vinb4-supply = <&main_dc_reg>;
-		vinb5-supply = <&main_dc_reg>;
-		vinb6-supply = <&main_dc_reg>;
-		vinb7-supply = <&main_dc_reg>;
-		vinb8-supply = <&main_dc_reg>;
-		vinb9-supply = <&main_dc_reg>;
-
-		vinl1-supply = <&buck7_reg>;
-		vinl2-supply = <&buck7_reg>;
-		vinl3-supply = <&buck7_reg>;
-		vinl4-supply = <&main_dc_reg>;
-		vinl5-supply = <&main_dc_reg>;
-		vinl6-supply = <&main_dc_reg>;
-		vinl7-supply = <&main_dc_reg>;
-		vinl8-supply = <&buck8_reg>;
-		vinl9-supply = <&buck8_reg>;
-
-		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
-					      <&gpd1 1 GPIO_ACTIVE_HIGH>,
-					      <&gpd1 2 GPIO_ACTIVE_HIGH>;
-		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
-					     <&gpx2 4 GPIO_ACTIVE_HIGH>,
-					     <&gpx2 5 GPIO_ACTIVE_HIGH>;
-
-		s5m8767_osc: clocks {
-			compatible = "samsung,s5m8767-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s5m8767_ap", "unused1", "unused2";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ALIVE_1.0V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_28IO_DP_1.35V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VDD_COMMON1_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VDD_IOPERI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VDD_EXT_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VDD_MPLL_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VDD_XPLL_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VDD_COMMON2_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "VDD_33ON_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				op_mode = <1>;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VDD_COMMON3_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VDD_ABB2_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "VDD_USB_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VDDQ_C2C_W_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VDD18_ABB0_3_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VDD10_COMMON4_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VDD18_HSIC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "VDDQ_MMC2_3_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "VDD_33ON_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <1>;
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "EXT_33_OFF";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				op_mode = <1>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "EXT_28_OFF";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <1>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "PVDD_LDO25";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				op_mode = <1>;
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "EXT_18_OFF";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				op_mode = <1>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_MIF";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VDD_ARM";
-				regulator-min-microvolt = <912500>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VDD_INT";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VDD_G3D";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VDD_MEM_1.35V";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1355000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "PVDD_BUCK7";
-				regulator-always-on;
-				op_mode = <1>;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "PVDD_BUCK8";
-				regulator-always-on;
-				op_mode = <1>;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "VDD_33_OFF_EXT1";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3000000>;
-				op_mode = <1>;
-			};
-		};
-	};
-};
-
-&i2c_3 {
-	status = "okay";
-
-	wm1811: audio-codec@1a {
-		compatible = "wlf,wm1811";
-		reg = <0x1a>;
-		clocks = <&i2s0 CLK_I2S_CDCLK>;
-		clock-names = "MCLK1";
-
-		AVDD2-supply = <&main_dc_reg>;
-		CPVDD-supply = <&main_dc_reg>;
-		DBVDD1-supply = <&main_dc_reg>;
-		DBVDD2-supply = <&main_dc_reg>;
-		DBVDD3-supply = <&main_dc_reg>;
-		LDO1VDD-supply = <&main_dc_reg>;
-		SPKVDD1-supply = <&main_dc_reg>;
-		SPKVDD2-supply = <&main_dc_reg>;
-
-		wlf,ldo1ena-gpios = <&gpb0 0 GPIO_ACTIVE_HIGH>;
-		wlf,ldo2ena-gpios = <&gpb0 1 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&i2c_8 {
-	status = "okay";
-	/* used by HDMI PHY */
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_9 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <40000>;
-};
-
-&i2s0 {
-	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
-	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
-	status = "okay";
-};
-
-&i2s0_bus {
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
-};
-
-&mali {
-	mali-supply = <&buck4_reg>;
-	status = "okay";
-};
-
-&mixer {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	vmmc-supply = <&mmc_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-};
-
-&mmc_2 {
-	status = "okay";
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	vmmc-supply = <&mmc_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	bus-width = <4>;
-	disable-wp;
-	cap-sd-highspeed;
-};
-
-&pinctrl_0 {
-	s5m8767_irq: s5m8767-irq-pins {
-		samsung,pins = "gpx3-2";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-};
-
-&rtc {
-	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sata_phy {
-	status = "okay";
-	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
-};
-
-&sata_phy_i2c {
-	status = "okay";
-};
-
-&usbdrd {
-	vdd10-supply = <&ldo15_reg>;
-	vdd33-supply = <&ldo12_reg>;
-};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
deleted file mode 100644
index 48732edadff15..0000000000000
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ /dev/null
@@ -1,833 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- */
-
-#include "exynos-pinctrl.h"
-
-&pinctrl_0 {
-	gpa0: gpa0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa2: gpa2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb0: gpb0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb1: gpb1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb2: gpb2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb3: gpb3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc2: gpc2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc3: gpc3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpy0: gpy0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy1: gpy1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy2: gpy2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy3: gpy3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy4: gpy4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy5: gpy5-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy6: gpy6-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpc4: gpc4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx0: gpx0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&combiner>;
-		#interrupt-cells = <2>;
-		interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
-			     <26 0>, <26 1>, <27 0>, <27 1>;
-	};
-
-	gpx1: gpx1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&combiner>;
-		#interrupt-cells = <2>;
-		interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
-			     <30 0>, <30 1>, <31 0>, <31 1>;
-	};
-
-	gpx2: gpx2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data-pins {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart0_fctl: uart0-fctl-pins {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c2_bus: i2c2-bus-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c2_hs_bus: i2c2-hs-bus-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c2_gpio_bus: i2c2-gpio-bus-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_data: uart2-data-pins {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_fctl: uart2-fctl-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c3_bus: i2c3-bus-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c3_hs_bus: i2c3-hs-bus-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart3_data: uart3-data-pins {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi0_bus: spi0-bus-pins {
-		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c4_bus: i2c4-bus-pins {
-		samsung,pins = "gpa2-0", "gpa2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c5_bus: i2c5-bus-pins {
-		samsung,pins = "gpa2-2", "gpa2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi1_bus: spi1-bus-pins {
-		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s1_bus: i2s1-bus-pins {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-			       "gpb0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm1_bus: pcm1-bus-pins {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-			       "gpb0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	ac97_bus: ac97-bus-pins {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-			       "gpb0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s2_bus: i2s2-bus-pins {
-		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-			       "gpb1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm2_bus: pcm2-bus-pins {
-		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-			       "gpb1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spdif_bus: spdif-bus-pins {
-		samsung,pins = "gpb1-0", "gpb1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi2_bus: spi2-bus-pins {
-		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c6_bus: i2c6-bus-pins {
-		samsung,pins = "gpb1-3", "gpb1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm0_out: pwm0-out-pins {
-		samsung,pins = "gpb2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm1_out: pwm1-out-pins {
-		samsung,pins = "gpb2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm2_out: pwm2-out-pins {
-		samsung,pins = "gpb2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm3_out: pwm3-out-pins {
-		samsung,pins = "gpb2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c7_bus: i2c7-bus-pins {
-		samsung,pins = "gpb2-2", "gpb2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c0_bus: i2c0-bus-pins {
-		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c1_bus: i2c1-bus-pins {
-		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c0_hs_bus: i2c0-hs-bus-pins {
-		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c1_hs_bus: i2c1-hs-bus-pins {
-		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	sd0_clk: sd0-clk-pins {
-		samsung,pins = "gpc0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cmd: sd0-cmd-pins {
-		samsung,pins = "gpc0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cd: sd0-cd-pins {
-		samsung,pins = "gpc0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus1: sd0-bus-width1-pins {
-		samsung,pins = "gpc0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus4: sd0-bus-width4-pins {
-		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus8: sd0-bus-width8-pins {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_clk: sd1-clk-pins {
-		samsung,pins = "gpc2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cmd: sd1-cmd-pins {
-		samsung,pins = "gpc2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cd: sd1-cd-pins {
-		samsung,pins = "gpc2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus1: sd1-bus-width1-pins {
-		samsung,pins = "gpc2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus4: sd1-bus-width4-pins {
-		samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_clk: sd2-clk-pins {
-		samsung,pins = "gpc3-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cmd: sd2-cmd-pins {
-		samsung,pins = "gpc3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cd: sd2-cd-pins {
-		samsung,pins = "gpc3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus1: sd2-bus-width1-pins {
-		samsung,pins = "gpc3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus4: sd2-bus-width4-pins {
-		samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus8: sd2-bus-width8-pins {
-		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_clk: sd3-clk-pins {
-		samsung,pins = "gpc4-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_cmd: sd3-cmd-pins {
-		samsung,pins = "gpc4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_cd: sd3-cd-pins {
-		samsung,pins = "gpc4-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_bus1: sd3-bus-width1-pins {
-		samsung,pins = "gpc4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_bus4: sd3-bus-width4-pins {
-		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	uart1_data: uart1-data-pins {
-		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_fctl: uart1-fctl-pins {
-		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	dp_hpd: dp-hpd-pins {
-		samsung,pins = "gpx0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	hdmi_cec: hdmi-cec-pins {
-		samsung,pins = "gpx3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	hdmi_hpd: hdmi-hpd-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-};
-
-&pinctrl_1 {
-	gpe0: gpe0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe1: gpe1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg0: gpg0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg1: gpg1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg2: gpg2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gph0: gph0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gph1: gph1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	cam_gpio_a: cam-gpio-a-pins {
-		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-			       "gpe1-0", "gpe1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_gpio_b: cam-gpio-b-pins {
-		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_i2c2_bus: cam-i2c2-bus-pins {
-		samsung,pins = "gpe0-6", "gpe1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_spi1_bus: cam-spi1-bus-pins {
-		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_i2c1_bus: cam-i2c1-bus-pins {
-		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_i2c0_bus: cam-i2c0-bus-pins {
-		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_spi0_bus: cam-spi0-bus-pins {
-		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_bayrgb_bus: cam-bayrgb-bus-pins {
-		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
-			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
-			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
-			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
-			       "gpg2-0", "gpg2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_a: cam-port-a-pins {
-		samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
-			       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
-			       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_2 {
-	gpv0: gpv0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv1: gpv1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv2: gpv2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv3: gpv3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv4: gpv4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	c2c_rxd: c2c-rxd-pins {
-		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-			       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-			       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-			       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	c2c_txd: c2c-txd-pins {
-		samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-			       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-			       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-			       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_3 {
-	gpz: gpz-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	i2s0_bus: i2s0-bus-pins {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
deleted file mode 100644
index bb623726ef1e6..0000000000000
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ /dev/null
@@ -1,430 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung SMDK5250 board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include <dt-bindings/clock/maxim,max77686.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "exynos5250.dtsi"
-
-/ {
-	model = "Samsung SMDK5250 board based on Exynos5250";
-	compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
-
-	aliases {
-		mmc0 = &mmc_0;
-		mmc1 = &mmc_2;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
-		stdout-path = "serial2:115200n8";
-	};
-
-	vdd: fixed-regulator-vdd {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-supply";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	dbvdd: fixed-regulator-dbvdd {
-		compatible = "regulator-fixed";
-		regulator-name = "dbvdd-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	spkvdd: fixed-regulator-spkvdd {
-		compatible = "regulator-fixed";
-		regulator-name = "spkvdd-supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "samsung,smdk-wm8994";
-
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&wm8994>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-
-		codec_mclk: codec-mclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <16934000>;
-		};
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&dp {
-	samsung,color-space = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <4>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd>;
-	status = "okay";
-
-	display-timings {
-		native-mode = <&timing0>;
-
-		timing0: timing {
-			/* 1280x800 */
-			clock-frequency = <50000>;
-			hactive = <1280>;
-			vactive = <800>;
-			hfront-porch = <4>;
-			hback-porch = <4>;
-			hsync-len = <4>;
-			vback-porch = <4>;
-			vfront-porch = <4>;
-			vsync-len = <4>;
-		};
-	};
-};
-
-&ehci {
-	samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-	ddc = <&i2c_2>;
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	vdd-supply = <&ldo8_reg>;
-	vdd_osc-supply = <&ldo10_reg>;
-	vdd_pll-supply = <&ldo8_reg>;
-};
-
-&i2c_0 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <20000>;
-
-	eeprom@50 {
-		compatible = "samsung,s524ad0xd1", "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	max77686: pmic@9 {
-		compatible = "maxim,max77686";
-		reg = <0x09>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max77686_irq>;
-		#clock-cells = <1>;
-		wakeup-source;
-
-		voltage-regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "P1.0V_LDO_OUT1";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "P1.2V_LDO_OUT2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "P1.8V_LDO_OUT3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "P2.8V_LDO_OUT4";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "P1.8V_LDO_OUT5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "P1.1V_LDO_OUT6";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "P1.1V_LDO_OUT7";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "P1.0V_LDO_OUT8";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "P1.8V_LDO_OUT10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "P1.8V_LDO_OUT11";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "P3.0V_LDO_OUT12";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "P1.8V_LDO_OUT13";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "P1.8V_LDO_OUT14";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "P1.0V_LDO_OUT15";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "P1.8V_LDO_OUT16";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "P1.8V_BUCK_OUT5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <20000>;
-
-	eeprom@51 {
-		compatible = "samsung,s524ad0xd1", "atmel,24c128";
-		reg = <0x51>;
-	};
-
-	wm8994: audio-codec@1a {
-		compatible = "wlf,wm8994";
-		reg = <0x1a>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		clocks = <&codec_mclk>;
-		clock-names = "MCLK1";
-
-		AVDD2-supply = <&vdd>;
-		CPVDD-supply = <&vdd>;
-		DBVDD-supply = <&dbvdd>;
-		SPKVDD1-supply = <&spkvdd>;
-		SPKVDD2-supply = <&spkvdd>;
-	};
-};
-
-&i2c_2 {
-	status = "okay";
-	/* used by HDMI DDC */
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_8 {
-	status = "okay";
-	/* used by HDMI PHY */
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_9 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <40000>;
-};
-
-&i2s0 {
-	status = "okay";
-};
-
-&mixer {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-};
-
-&mmc_2 {
-	status = "okay";
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	bus-width = <4>;
-	disable-wp;
-	cap-sd-highspeed;
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sata_phy {
-	status = "okay";
-	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
-};
-
-&sata_phy_i2c {
-	status = "okay";
-};
-
-&spi_1 {
-	status = "okay";
-	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "winbond,w25x80", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-
-		controller-data {
-			samsung,spi-feedback-delay = <0>;
-		};
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "Kernel";
-			reg = <0x40000 0xc0000>;
-		};
-	};
-};
-
-&pinctrl_0 {
-	max77686_irq: max77686-irq-pins {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&usbdrd {
-	vdd10-supply = <&ldo15_reg>;
-	vdd33-supply = <&ldo12_reg>;
-};
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
deleted file mode 100644
index 59b2cc35c37b7..0000000000000
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ /dev/null
@@ -1,718 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Google Snow board device tree source
- *
- * Copyright (c) 2012 Google, Inc
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/maxim,max77686.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/sound/samsung-i2s.h>
-#include "exynos5250.dtsi"
-
-/ {
-	aliases {
-		i2c104 = &i2c_104;
-		mmc0 = &mmc_0; /* eMMC */
-		mmc1 = &mmc_2; /* SD */
-		mmc2 = &mmc_3; /* WiFi */
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=tty1";
-		stdout-path = "serial3:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq &lid_irq>;
-
-		power-key {
-			label = "Power";
-			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		lid-switch {
-			label = "Lid";
-			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0>; /* SW_LID */
-			debounce-interval = <1>;
-			wakeup-source;
-		};
-	};
-
-	vbat: vbat-fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat-supply";
-		regulator-boot-on;
-	};
-
-	i2c-arbitrator {
-		compatible = "i2c-arb-gpio-challenge";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&i2c_4>;
-
-		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
-		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
-		slew-delay-us = <10>;
-		wait-retry-us = <3000>;
-		wait-free-us = <50000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
-
-		/* Use ID 104 as a hint that we're on physical bus 4 */
-		i2c_104: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-			};
-
-			cros_ec: embedded-controller@1e {
-				compatible = "google,cros-ec-i2c";
-				reg = <0x1e>;
-				interrupts = <6 IRQ_TYPE_NONE>;
-				interrupt-parent = <&gpx1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&ec_irq>;
-				wakeup-source;
-			};
-
-			power-regulator@48 {
-				compatible = "ti,tps65090";
-				reg = <0x48>;
-
-				/*
-				 * Config irq to disable internal pulls
-				 * even though we run in polling mode.
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&tps65090_irq>;
-
-				vsys1-supply = <&vbat>;
-				vsys2-supply = <&vbat>;
-				vsys3-supply = <&vbat>;
-				infet1-supply = <&vbat>;
-				infet2-supply = <&vbat>;
-				infet3-supply = <&vbat>;
-				infet4-supply = <&vbat>;
-				infet5-supply = <&vbat>;
-				infet6-supply = <&vbat>;
-				infet7-supply = <&vbat>;
-				vsys-l1-supply = <&vbat>;
-				vsys-l2-supply = <&vbat>;
-
-				regulators {
-					dcdc1 {
-						ti,enable-ext-control;
-					};
-					dcdc2 {
-						ti,enable-ext-control;
-					};
-					dcdc3 {
-						ti,enable-ext-control;
-					};
-					fet1: fet1 {
-						regulator-name = "vcd_led";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet2: fet2 {
-						regulator-name = "video_mid";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet3 {
-						regulator-name = "wwan_r";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet4 {
-						regulator-name = "sdcard";
-						ti,overcurrent-wait = <3>;
-					};
-					fet5 {
-						regulator-name = "camout";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet6: fet6 {
-						regulator-name = "lcd_vdd";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet7: fet7 {
-						regulator-name = "video_mid_1a";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					ldo1 {
-					};
-					ldo2 {
-					};
-				};
-
-				charger {
-					compatible = "ti,tps65090-charger";
-				};
-			};
-		};
-	};
-
-	sound {
-		samsung,i2s-controller = <&i2s0>;
-	};
-
-	usb3_vbus_reg: regulator-usb3 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_vbus_en>;
-		enable-active-high;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
-		power-supply = <&fet1>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-	};
-
-	panel: panel {
-		compatible = "auo,b116xw03";
-		power-supply = <&fet6>;
-		backlight = <&backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&bridge_out>;
-			};
-		};
-	};
-
-	mmc3_pwrseq: mmc3-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
-			      <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
-		clocks = <&max77686 MAX77686_CLK_PMIC>;
-		clock-names = "ext_clock";
-	};
-};
-
-&clock {
-	assigned-clocks = <&clock CLK_FOUT_EPLL>;
-	assigned-clock-rates = <49152000>;
-};
-
-&clock_audss {
-	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&dp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd>;
-	samsung,color-space = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <2>;
-	hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
-
-	ports {
-		port {
-			dp_out: endpoint {
-				remote-endpoint = <&bridge_in>;
-			};
-		};
-	};
-};
-
-&ehci {
-	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
-};
-
-&hdmi {
-	status = "okay";
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	ddc = <&i2c_2>;
-	hdmi-en-supply = <&tps65090_fet7>;
-	vdd-supply = <&ldo8_reg>;
-	vdd_osc-supply = <&ldo10_reg>;
-	vdd_pll-supply = <&ldo8_reg>;
-};
-
-&hdmicec {
-	status = "okay";
-};
-
-&i2c_0 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	max77686: pmic@9 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max77686_irq>;
-		wakeup-source;
-		reg = <0x09>;
-		#clock-cells = <1>;
-
-		voltage-regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "P1.0V_LDO_OUT1";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "P1.8V_LDO_OUT2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "P1.8V_LDO_OUT3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "P1.1V_LDO_OUT7";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "P1.0V_LDO_OUT8";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "P1.8V_LDO_OUT10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "P3.0V_LDO_OUT12";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "P1.8V_LDO_OUT14";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "P1.0V_LDO_OUT15";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "P1.8V_LDO_OUT16";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "P1.8V_BUCK_OUT5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "P1.35V_BUCK_OUT6";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "P2.0V_BUCK_OUT7";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "P2.85V_BUCK_OUT8";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	trackpad@67 {
-		reg = <0x67>;
-		compatible = "cypress,cyapa";
-		interrupts = <2 IRQ_TYPE_NONE>;
-		interrupt-parent = <&gpx1>;
-		wakeup-source;
-	};
-};
-
-/*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
-&i2c2_bus {
-	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-};
-
-&i2c_2 {
-	status = "okay";
-	/* used by HDMI DDC */
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_3 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_4 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_5 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_7 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-
-	ptn3460: lvds-bridge@20 {
-		compatible = "nxp,ptn3460";
-		reg = <0x20>;
-		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
-		edid-emulation = <5>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				bridge_in: endpoint {
-					remote-endpoint = <&dp_out>;
-				};
-			};
-		};
-	};
-};
-
-&i2c_8 {
-	status = "okay";
-	/* used by HDMI PHY */
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-};
-
-&i2s0 {
-	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
-	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
-	status = "okay";
-};
-
-&mali {
-	mali-supply = <&buck4_reg>;
-	status = "okay";
-};
-
-&mixer {
-	status = "okay";
-};
-
-/* eMMC flash */
-&mmc_0 {
-	status = "okay";
-	non-removable;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-};
-
-/* uSD card */
-&mmc_2 {
-	status = "okay";
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	bus-width = <4>;
-	wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
-	cap-sd-highspeed;
-};
-
-/*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- *
- * WiFi SDIO module
- */
-&mmc_3 {
-	status = "okay";
-	non-removable;
-	cap-sdio-irq;
-	keep-power-in-suspend;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	mmc-pwrseq = <&mmc3_pwrseq>;
-};
-
-&pinctrl_0 {
-	wifi_en: wifi-en-pins {
-		samsung,pins = "gpx0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	wifi_rst: wifi-rst-pins {
-		samsung,pins = "gpx0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	power_key_irq: power-key-irq-pins {
-		samsung,pins = "gpx1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	ec_irq: ec-irq-pins {
-		samsung,pins = "gpx1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	tps65090_irq: tps65090-irq-pins {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	usb3_vbus_en: usb3-vbus-en-pins {
-		samsung,pins = "gpx2-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	max77686_irq: max77686-irq-pins {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lid_irq: lid-irq-pins {
-		samsung,pins = "gpx3-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	arb_their_claim: arb-their-claim-pins {
-		samsung,pins = "gpe0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	arb_our_claim: arb-our-claim-pins {
-		samsung,pins = "gpf0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pmu_system_controller {
-	assigned-clocks = <&pmu_system_controller 0>;
-	assigned-clock-parents = <&clock CLK_FIN_PLL>;
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sd3_bus4 {
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
-&sd3_clk {
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
-&sd3_cmd {
-	samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
-&spi_1 {
-	status = "okay";
-	samsung,spi-src-clk = <0>;
-	num-cs = <1>;
-	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
-};
-
-&usbdrd {
-	vdd10-supply = <&ldo15_reg>;
-	vdd33-supply = <&ldo12_reg>;
-};
-
-&usbdrd_dwc3 {
-	dr_mode = "host";
-};
-
-&usbdrd_phy {
-	vbus-supply = <&usb3_vbus_reg>;
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
deleted file mode 100644
index 3d32c3476e84d..0000000000000
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Google Snow Rev 5+ board device tree source
- *
- * Copyright (c) 2012 Google, Inc
- * Copyright (c) 2015 Samsung Electronics Co., Ltd.
- *             http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5250-snow-common.dtsi"
-
-/ {
-	model = "Google Snow Rev 5+";
-	compatible = "google,snow-rev5", "samsung,exynos5250",
-		"samsung,exynos5";
-	chassis-type = "laptop";
-
-	sound {
-		compatible = "google,snow-audio-max98090";
-
-		samsung,model = "Snow-I2S-MAX98090";
-		samsung,audio-codec = <&max98090>;
-
-		cpu {
-			sound-dai = <&i2s0 0>;
-		};
-
-		codec {
-			sound-dai = <&max98090>, <&hdmi>;
-		};
-	};
-};
-
-&i2c_7 {
-	max98090: audio-codec@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupts = <4 IRQ_TYPE_NONE>;
-		interrupt-parent = <&gpx0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max98090_irq>;
-		clocks = <&pmu_system_controller 0>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-	};
-};
-
-&pinctrl_0 {
-	max98090_irq: max98090-irq-pins {
-		samsung,pins = "gpx0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
deleted file mode 100644
index 906aa7aae710a..0000000000000
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Google Snow board device tree source
- *
- * Copyright (c) 2012 Google, Inc
- */
-
-/dts-v1/;
-#include "exynos5250-snow-common.dtsi"
-
-/ {
-	model = "Google Snow";
-	compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250",
-		"samsung,exynos5";
-	chassis-type = "laptop";
-
-	sound {
-		compatible = "google,snow-audio-max98095";
-
-		samsung,model = "Snow-I2S-MAX98095";
-		samsung,audio-codec = <&max98095>;
-
-		cpu {
-			sound-dai = <&i2s0 0>;
-		};
-
-		codec {
-			sound-dai = <&max98095 0>, <&hdmi>;
-		};
-	};
-};
-
-&i2c_7 {
-	max98095: audio-codec@11 {
-		compatible = "maxim,max98095";
-		reg = <0x11>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max98095_en>;
-		clocks = <&pmu_system_controller 0>;
-		clock-names = "mclk";
-		#sound-dai-cells = <1>;
-	};
-};
-
-&pinctrl_0 {
-	max98095_en: max98095-en-pins {
-		samsung,pins = "gpx1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
deleted file mode 100644
index c12bb17631b7c..0000000000000
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ /dev/null
@@ -1,567 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Google Spring board device tree source
- *
- * Copyright (c) 2013 Google, Inc
- * Copyright (c) 2014 SUSE LINUX Products GmbH
- */
-
-/dts-v1/;
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include "exynos5250.dtsi"
-
-/ {
-	model = "Google Spring";
-	compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
-	chassis-type = "laptop";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		mmc0 = &mmc_0;
-		mmc1 = &mmc_1;
-	};
-
-	chosen {
-		bootargs = "console=tty1";
-		stdout-path = "serial3:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq>, <&lid_irq>;
-
-		power-key {
-			label = "Power";
-			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		lid-switch {
-			label = "Lid";
-			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0>; /* SW_LID */
-			debounce-interval = <1>;
-			wakeup-source;
-		};
-	};
-
-	usb-hub {
-		compatible = "smsc,usb3503a";
-		reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hsic_reset>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&dp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd_gpio>;
-	samsung,color-space = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <1>;
-	hpd-gpios = <&gpc3 0 GPIO_ACTIVE_HIGH>;
-};
-
-&ehci {
-	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
-};
-
-&hdmi {
-	status = "okay";
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	ddc = <&i2c_2>;
-	hdmi-en-supply = <&ldo8_reg>;
-	vdd-supply = <&ldo8_reg>;
-	vdd_osc-supply = <&ldo10_reg>;
-	vdd_pll-supply = <&ldo8_reg>;
-};
-
-&i2c_0 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	pmic@66 {
-		compatible = "samsung,s5m8767-pmic";
-		reg = <0x66>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
-		wakeup-source;
-
-		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
-					      <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
-					      <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
-
-		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
-					     <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
-					     <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
-
-		/*
-		 * The following arrays of DVS voltages are not used, since we are
-		 * not using GPIOs to control PMIC bucks, but they must be defined
-		 * to please the driver.
-		 */
-		s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
-						 <1250000>, <1200000>,
-						 <1150000>, <1100000>,
-						 <1000000>, <950000>;
-
-		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
-						 <1100000>, <1100000>,
-						 <1000000>, <1000000>,
-						 <1000000>, <1000000>;
-
-		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>;
-
-		s5m8767_osc: clocks {
-			compatible = "samsung,s5m8767-clk";
-			#clock-cells = <1>;
-			clock-output-names = "en32khz_ap",
-					     "en32khz_cp",
-					     "en32khz_bt";
-		};
-
-		regulators {
-			ldo4_reg: LDO4 {
-				regulator-name = "P1.0V_LDO_OUT4";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				op_mode = <0>;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "P1.0V_LDO_OUT5";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				op_mode = <0>;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "vdd_mydp";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				op_mode = <3>;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "P1.1V_LDO_OUT7";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				op_mode = <3>;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "P1.0V_LDO_OUT8";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				op_mode = <3>;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "P1.8V_LDO_OUT10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <3>;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "P1.8V_LDO_OUT11";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <0>;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "P3.0V_LDO_OUT12";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				op_mode = <3>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "P1.8V_LDO_OUT13";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <0>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "P1.8V_LDO_OUT14";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <3>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "P1.0V_LDO_OUT15";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				op_mode = <3>;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "P1.8V_LDO_OUT16";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <3>;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "P2.8V_LDO_OUT17";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				op_mode = <0>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "vdd_bridge";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				op_mode = <1>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <3>;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <3>;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <3>;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
-				op_mode = <3>;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "P1.8V_BUCK_OUT5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "P1.2V_BUCK_OUT6";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <0>;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "vdd_ummc";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <3>;
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	trackpad@4b {
-		compatible = "atmel,maxtouch";
-		reg = <0x4b>;
-		interrupt-parent = <&gpx1>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&trackpad_irq>;
-		linux,gpio-keymap = <KEY_RESERVED
-				     KEY_RESERVED
-				     KEY_RESERVED
-				     KEY_RESERVED
-				     KEY_RESERVED
-				     BTN_LEFT>;
-		wakeup-source;
-	};
-};
-
-/*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
-&i2c2_bus {
-	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-};
-
-&i2c_2 {
-	status = "okay";
-	/* used by HDMI DDC */
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_3 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_4 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-
-	cros_ec: embedded-controller@1e {
-		compatible = "google,cros-ec-i2c";
-		reg = <0x1e>;
-		interrupts = <6 IRQ_TYPE_NONE>;
-		interrupt-parent = <&gpx1>;
-		wakeup-source;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ec_irq>;
-	};
-};
-
-&i2c_5 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_7 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-
-	temperature-sensor@4c {
-		compatible = "gmt,g781";
-		reg = <0x4c>;
-	};
-};
-
-&i2c_8 {
-	status = "okay";
-	/* used by HDMI PHY */
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-};
-
-&i2s0 {
-	status = "okay";
-};
-
-&mixer {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-};
-
-/*
- * On Spring we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
-&mmc_1 {
-	status = "okay";
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-};
-
-&pinctrl_0 {
-	s5m8767_dvs: s5m8767-dvs-pins {
-		samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	dp_hpd_gpio: dp-hpd-pins {
-		samsung,pins = "gpc3-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	trackpad_irq: trackpad-irq-pins {
-		samsung,pins = "gpx1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	power_key_irq: power-key-irq-pins {
-		samsung,pins = "gpx1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	ec_irq: ec-irq-pins {
-		samsung,pins = "gpx1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	s5m8767_ds: s5m8767-ds-pins {
-		samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	s5m8767_irq: s5m8767-irq-pins {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lid_irq: lid-irq-pins {
-		samsung,pins = "gpx3-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	hsic_reset: hsic-reset-pins {
-		samsung,pins = "gpe1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sd1_bus4 {
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
-&sd1_cd {
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
-&sd1_clk {
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
-&sd1_cmd {
-	samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
-&spi_1 {
-	status = "okay";
-	samsung,spi-src-clk = <0>;
-	num-cs = <1>;
-};
-
-&usbdrd {
-	vdd10-supply = <&ldo15_reg>;
-	vdd33-supply = <&ldo12_reg>;
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
deleted file mode 100644
index 1a4c6c028d038..0000000000000
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ /dev/null
@@ -1,1225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung Exynos5250 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung Exynos5250 SoC device nodes are listed in this file.
- * Exynos5250 based board files can include this file and provide
- * values for board specfic bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos5250 SoC. As device tree coverage for Exynos5250 increases,
- * additional nodes can be added to this file.
- */
-
-#include <dt-bindings/clock/exynos5250.h>
-#include "exynos5.dtsi"
-#include "exynos4-cpu-thermal.dtsi"
-#include <dt-bindings/clock/exynos-audss-clk.h>
-
-/ {
-	compatible = "samsung,exynos5250", "samsung,exynos5";
-
-	aliases {
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-		gsc0 = &gsc_0;
-		gsc1 = &gsc_1;
-		gsc2 = &gsc_2;
-		gsc3 = &gsc_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-		i2c8 = &i2c_8;
-		i2c9 = &i2c_9;
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-			};
-		};
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	cpu0_opp_table: opp-table-0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <925000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <937500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <950000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <975000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = <1012500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1025000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = <1050000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1075000>;
-			clock-latency-ns = <140000>;
-			opp-suspend;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1100000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1125000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1150000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1200000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1225000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1600000000 {
-			opp-hz = /bits/ 64 <1600000000>;
-			opp-microvolt = <1250000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1700000000 {
-			opp-hz = /bits/ 64 <1700000000>;
-			opp-microvolt = <1300000>;
-			clock-latency-ns = <140000>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <1 2>, <22 4>;
-	};
-
-	soc: soc {
-		sram@2020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x30000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x30000>;
-
-			smp-sram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sram@2f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x2f000 0x1000>;
-			};
-		};
-
-		pd_gsc: power-domain@10044000 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044000 0x20>;
-			#power-domain-cells = <0>;
-			label = "GSC";
-		};
-
-		pd_mfc: power-domain@10044040 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044040 0x20>;
-			#power-domain-cells = <0>;
-			label = "MFC";
-		};
-
-		pd_g3d: power-domain@10044060 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044060 0x20>;
-			#power-domain-cells = <0>;
-			label = "G3D";
-		};
-
-		pd_disp1: power-domain@100440a0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440a0 0x20>;
-			#power-domain-cells = <0>;
-			label = "DISP1";
-		};
-
-		pd_mau: power-domain@100440c0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440c0 0x20>;
-			#power-domain-cells = <0>;
-			label = "MAU";
-		};
-
-		clock: clock-controller@10010000 {
-			compatible = "samsung,exynos5250-clock";
-			reg = <0x10010000 0x30000>;
-			#clock-cells = <1>;
-		};
-
-		clock_audss: audss-clock-controller@3810000 {
-			compatible = "samsung,exynos5250-audss-clock";
-			reg = <0x03810000 0x0c>;
-			#clock-cells = <1>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
-				 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
-			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-			power-domains = <&pd_mau>;
-		};
-
-		timer@101c0000 {
-			compatible = "samsung,exynos5250-mct",
-				     "samsung,exynos4210-mct";
-			reg = <0x101c0000 0x800>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-			interrupts-extended = <&combiner 23 3>,
-					      <&combiner 23 4>,
-					      <&combiner 25 2>,
-					      <&combiner 25 3>,
-					      <&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-					      <&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos5250-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakup_eint: wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_1: pinctrl@13400000 {
-			compatible = "samsung,exynos5250-pinctrl";
-			reg = <0x13400000 0x1000>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_2: pinctrl@10d10000 {
-			compatible = "samsung,exynos5250-pinctrl";
-			reg = <0x10d10000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_3: pinctrl@3860000 {
-			compatible = "samsung,exynos5250-pinctrl";
-			reg = <0x03860000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_mau>;
-		};
-
-		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon";
-			reg = <0x10040000 0x5000>;
-			clock-names = "clkout16";
-			clocks = <&clock CLK_FIN_PLL>;
-			#clock-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-
-			dp_phy: dp-phy {
-				compatible = "samsung,exynos5250-dp-video-phy";
-				#phy-cells = <0>;
-			};
-
-			mipi_phy: mipi-phy {
-				compatible = "samsung,s5pv210-mipi-video-phy";
-				#phy-cells = <1>;
-			};
-		};
-
-		watchdog@101d0000 {
-			compatible = "samsung,exynos5250-wdt";
-			reg = <0x101d0000 0x100>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_WDT>;
-			clock-names = "watchdog";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-		};
-
-		mfc: codec@11000000 {
-			compatible = "samsung,mfc-v6";
-			reg = <0x11000000 0x10000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_mfc>;
-			clocks = <&clock CLK_MFC>;
-			clock-names = "mfc";
-			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-			iommu-names = "left", "right";
-		};
-
-		rotator: rotator@11c00000 {
-			compatible = "samsung,exynos5250-rotator";
-			reg = <0x11c00000 0x64>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_ROTATOR>;
-			clock-names = "rotator";
-			iommus = <&sysmmu_rotator>;
-		};
-
-		mali: gpu@11800000 {
-			compatible = "samsung,exynos5250-mali", "arm,mali-t604";
-			reg = <0x11800000 0x5000>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "job", "mmu", "gpu";
-			clocks = <&clock CLK_G3D>;
-			clock-names = "core";
-			operating-points-v2 = <&gpu_opp_table>;
-			power-domains = <&pd_g3d>;
-			status = "disabled";
-
-			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-100000000 {
-					opp-hz = /bits/ 64 <100000000>;
-					opp-microvolt = <925000>;
-				};
-				opp-160000000 {
-					opp-hz = /bits/ 64 <160000000>;
-					opp-microvolt = <925000>;
-				};
-				opp-266000000 {
-					opp-hz = /bits/ 64 <266000000>;
-					opp-microvolt = <1025000>;
-				};
-				opp-350000000 {
-					opp-hz = /bits/ 64 <350000000>;
-					opp-microvolt = <1075000>;
-				};
-				opp-400000000 {
-					opp-hz = /bits/ 64 <400000000>;
-					opp-microvolt = <1125000>;
-				};
-				opp-450000000 {
-					opp-hz = /bits/ 64 <450000000>;
-					opp-microvolt = <1150000>;
-				};
-				opp-533000000 {
-					opp-hz = /bits/ 64 <533000000>;
-					opp-microvolt = <1250000>;
-				};
-			};
-		};
-
-		tmu: tmu@10060000 {
-			compatible = "samsung,exynos5250-tmu";
-			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>;
-			clock-names = "tmu_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		sata: sata@122f0000 {
-			compatible = "snps,dwc-ahci";
-			reg = <0x122f0000 0x1ff>;
-			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
-			clock-names = "sata", "pclk";
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			ports-implemented = <0x1>;
-			status = "disabled";
-		};
-
-		sata_phy: sata-phy@12170000 {
-			compatible = "samsung,exynos5250-sata-phy";
-			reg = <0x12170000 0x1ff>;
-			clocks = <&clock CLK_SATA_PHYCTRL>;
-			clock-names = "sata_phyctrl";
-			#phy-cells = <0>;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		/* i2c_0-3 are defined in exynos5.dtsi */
-		i2c_4: i2c@12ca0000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12ca0000 0x100>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_I2C4>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c4_bus>;
-			status = "disabled";
-		};
-
-		i2c_5: i2c@12cb0000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12cb0000 0x100>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_I2C5>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c5_bus>;
-			status = "disabled";
-		};
-
-		i2c_6: i2c@12cc0000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12cc0000 0x100>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_I2C6>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c6_bus>;
-			status = "disabled";
-		};
-
-		i2c_7: i2c@12cd0000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12cd0000 0x100>;
-			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_I2C7>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c7_bus>;
-			status = "disabled";
-		};
-
-		i2c_8: i2c@12ce0000 {
-			compatible = "samsung,s3c2440-hdmiphy-i2c";
-			reg = <0x12ce0000 0x1000>;
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_I2C_HDMI>;
-			clock-names = "i2c";
-			status = "disabled";
-
-			hdmiphy: hdmi-phy@38 {
-				compatible = "samsung,exynos4212-hdmiphy";
-				reg = <0x38>;
-			};
-		};
-
-		i2c_9: i2c@121d0000 {
-			compatible = "samsung,exynos5-sata-phy-i2c";
-			reg = <0x121d0000 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_SATA_PHYI2C>;
-			clock-names = "i2c";
-			status = "disabled";
-
-			sata_phy_i2c: sata-phy-i2c@38 {
-				compatible = "samsung,exynos-sataphy-i2c";
-				reg = <0x38>;
-				status = "disabled";
-			};
-		};
-
-		spi_0: spi@12d20000 {
-			compatible = "samsung,exynos4210-spi";
-			status = "disabled";
-			reg = <0x12d20000 0x100>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 5>, <&pdma0 4>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-		};
-
-		spi_1: spi@12d30000 {
-			compatible = "samsung,exynos4210-spi";
-			status = "disabled";
-			reg = <0x12d30000 0x100>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma1 5>, <&pdma1 4>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-		};
-
-		spi_2: spi@12d40000 {
-			compatible = "samsung,exynos4210-spi";
-			status = "disabled";
-			reg = <0x12d40000 0x100>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 7>, <&pdma0 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-			clock-names = "spi", "spi_busclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_bus>;
-		};
-
-		mmc_0: mmc@12200000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12200000 0x1000>;
-			clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12210000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12210000 0x1000>;
-			clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12220000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12220000 0x1000>;
-			clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		mmc_3: mmc@12230000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12230000 0x1000>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		i2s0: i2s@3830000 {
-			compatible = "samsung,s5pv210-i2s";
-			status = "disabled";
-			reg = <0x03830000 0x100>;
-			dmas = <&pdma0 10>,
-				<&pdma0 9>,
-				<&pdma0 8>;
-			dma-names = "tx", "rx", "tx-sec";
-			clocks = <&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_SCLK_I2S>;
-			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-			samsung,idma-addr = <0x03000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s0_bus>;
-			power-domains = <&pd_mau>;
-			#clock-cells = <1>;
-			#sound-dai-cells = <1>;
-		};
-
-		i2s1: i2s@12d60000 {
-			compatible = "samsung,s3c6410-i2s";
-			status = "disabled";
-			reg = <0x12d60000 0x100>;
-			dmas = <&pdma1 12>,
-				<&pdma1 11>;
-			dma-names = "tx", "rx";
-			clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
-			clock-names = "iis", "i2s_opclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s1_bus>;
-			power-domains = <&pd_mau>;
-			#sound-dai-cells = <1>;
-		};
-
-		i2s2: i2s@12d70000 {
-			compatible = "samsung,s3c6410-i2s";
-			status = "disabled";
-			reg = <0x12d70000 0x100>;
-			dmas = <&pdma0 12>,
-				<&pdma0 11>;
-			dma-names = "tx", "rx";
-			clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
-			clock-names = "iis", "i2s_opclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s2_bus>;
-			power-domains = <&pd_mau>;
-			#sound-dai-cells = <1>;
-		};
-
-		usbdrd: usb@12000000 {
-			compatible = "samsung,exynos5250-dwusb3";
-			clocks = <&clock CLK_USB3>;
-			clock-names = "usbdrd30";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x12000000 0x10000>;
-
-			usbdrd_dwc3: usb@0 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x10000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usbdrd_phy: phy@12100000 {
-			compatible = "samsung,exynos5250-usbdrd-phy";
-			reg = <0x12100000 0x100>;
-			clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
-			clock-names = "phy", "ref";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		ehci: usb@12110000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0x12110000 0x100>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&clock CLK_USB2>;
-			clock-names = "usbhost";
-			phys = <&usb2_phy_gen 1>;
-			phy-names = "host";
-		};
-
-		ohci: usb@12120000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0x12120000 0x100>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&clock CLK_USB2>;
-			clock-names = "usbhost";
-			phys = <&usb2_phy_gen 1>;
-			phy-names = "host";
-		};
-
-		usb2_phy_gen: phy@12130000 {
-			compatible = "samsung,exynos5250-usb2-phy";
-			reg = <0x12130000 0x100>;
-			clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
-			clock-names = "phy", "ref";
-			#phy-cells = <1>;
-			samsung,sysreg-phandle = <&sysreg_system_controller>;
-			samsung,pmureg-phandle = <&pmu_system_controller>;
-		};
-
-		pdma0: dma-controller@121a0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121a0000 0x1000>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		pdma1: dma-controller@121b0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121b0000 0x1000>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		mdma0: dma-controller@10800000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10800000 0x1000>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		mdma1: dma-controller@11c10000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11c10000 0x1000>;
-			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		gsc_0: gsc@13e00000 {
-			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
-			reg = <0x13e00000 0x1000>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_gsc>;
-			clocks = <&clock CLK_GSCL0>;
-			clock-names = "gscl";
-			iommus = <&sysmmu_gsc0>;
-		};
-
-		gsc_1: gsc@13e10000 {
-			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
-			reg = <0x13e10000 0x1000>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_gsc>;
-			clocks = <&clock CLK_GSCL1>;
-			clock-names = "gscl";
-			iommus = <&sysmmu_gsc1>;
-		};
-
-		gsc_2: gsc@13e20000 {
-			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
-			reg = <0x13e20000 0x1000>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_gsc>;
-			clocks = <&clock CLK_GSCL2>;
-			clock-names = "gscl";
-			iommus = <&sysmmu_gsc2>;
-		};
-
-		gsc_3: gsc@13e30000 {
-			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
-			reg = <0x13e30000 0x1000>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_gsc>;
-			clocks = <&clock CLK_GSCL3>;
-			clock-names = "gscl";
-			iommus = <&sysmmu_gsc3>;
-		};
-
-		hdmi: hdmi@14530000 {
-			compatible = "samsung,exynos4212-hdmi";
-			reg = <0x14530000 0x70000>;
-			power-domains = <&pd_disp1>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-				 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-				 <&clock CLK_MOUT_HDMI>;
-			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-					"sclk_hdmiphy", "mout_hdmi";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			phy = <&hdmiphy>;
-			#sound-dai-cells = <0>;
-			status = "disabled";
-		};
-
-		hdmicec: cec@101b0000 {
-			compatible = "samsung,s5p-cec";
-			reg = <0x101b0000 0x200>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_HDMI_CEC>;
-			clock-names = "hdmicec";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			hdmi-phandle = <&hdmi>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdmi_cec>;
-			status = "disabled";
-		};
-
-		mixer: mixer@14450000 {
-			compatible = "samsung,exynos5250-mixer";
-			reg = <0x14450000 0x10000>;
-			power-domains = <&pd_disp1>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-				 <&clock CLK_SCLK_HDMI>;
-			clock-names = "mixer", "hdmi", "sclk_hdmi";
-			iommus = <&sysmmu_tv>;
-			status = "disabled";
-		};
-
-		dsi_0: dsi@14500000 {
-			compatible = "samsung,exynos4210-mipi-dsi";
-			reg = <0x14500000 0x10000>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			samsung,power-domain = <&pd_disp1>;
-			phys = <&mipi_phy 3>;
-			phy-names = "dsim";
-			clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>;
-			clock-names = "bus_clk", "sclk_mipi";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		adc: adc@12d10000 {
-			compatible = "samsung,exynos-adc-v1";
-			reg = <0x12d10000 0x100>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_ADC>;
-			clock-names = "adc";
-			#io-channel-cells = <1>;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		sysmmu_g2d: sysmmu@10a60000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10a60000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <24 5>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_mfc_r: sysmmu@11200000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11200000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <6 2>;
-			power-domains = <&pd_mfc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_mfc_l: sysmmu@11210000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11210000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <8 5>;
-			power-domains = <&pd_mfc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_rotator: sysmmu@11d40000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11d40000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_jpeg: sysmmu@11f20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11f20000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 2>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_isp: sysmmu@13260000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13260000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 6>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_ISP>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_drc: sysmmu@13270000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13270000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <11 6>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_DRC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_fd: sysmmu@132a0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132a0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <5 0>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_FD>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_scc: sysmmu@13280000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13280000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <5 2>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_SCC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_scp: sysmmu@13290000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13290000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <3 6>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_SCP>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_mcuctl: sysmmu@132b0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132b0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <5 4>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_MCU>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_odc: sysmmu@132c0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132c0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <11 0>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_ODC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_dis0: sysmmu@132d0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132d0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 4>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_DIS0>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_dis1: sysmmu@132e0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132e0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <9 4>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_DIS1>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_3dnr: sysmmu@132f0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132f0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <5 6>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_3DNR>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite0: sysmmu@13c40000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13c40000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <3 4>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite1: sysmmu@13c50000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13c50000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <24 1>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gsc0: sysmmu@13e80000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13e80000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 0>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gsc1: sysmmu@13e90000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13e90000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 2>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gsc2: sysmmu@13ea0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13ea0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 4>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gsc3: sysmmu@13eb0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13eb0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 6>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimd1: sysmmu@14640000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x14640000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <3 2>;
-			power-domains = <&pd_disp1>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_tv: sysmmu@14650000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x14650000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <7 4>;
-			power-domains = <&pd_disp1>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
-			#iommu-cells = <0>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		/*
-		 * Unfortunately we need this since some versions
-		 * of U-Boot on Exynos don't set the CNTFRQ register,
-		 * so we need the value from DT.
-		 */
-		clock-frequency = <24000000>;
-	};
-};
-
-&cpu_thermal {
-	polling-delay-passive = <0>;
-	polling-delay = <0>;
-	thermal-sensors = <&tmu>;
-
-	cooling-maps {
-		map0 {
-			/* Corresponds to 800MHz at freq_table */
-			cooling-device = <&cpu0 9 9>, <&cpu1 9 9>;
-		};
-		map1 {
-			/* Corresponds to 200MHz at freq_table */
-			cooling-device = <&cpu0 15 15>,
-					 <&cpu1 15 15>;
-		};
-	};
-};
-
-&dp {
-	power-domains = <&pd_disp1>;
-	clocks = <&clock CLK_DP>;
-	clock-names = "dp";
-	phys = <&dp_phy>;
-	phy-names = "dp";
-};
-
-&fimd {
-	power-domains = <&pd_disp1>;
-	clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
-	clock-names = "sclk_fimd", "fimd";
-	iommus = <&sysmmu_fimd1>;
-};
-
-&g2d {
-	iommus = <&sysmmu_g2d>;
-	clocks = <&clock CLK_G2D>;
-	clock-names = "fimg2d";
-	status = "okay";
-};
-
-&i2c_0 {
-	clocks = <&clock CLK_I2C0>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_bus>;
-};
-
-&i2c_1 {
-	clocks = <&clock CLK_I2C1>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_bus>;
-};
-
-&i2c_2 {
-	clocks = <&clock CLK_I2C2>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_bus>;
-};
-
-&i2c_3 {
-	clocks = <&clock CLK_I2C3>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_bus>;
-};
-
-&prng {
-	clocks = <&clock CLK_SSS>;
-	clock-names = "secss";
-};
-
-&pwm {
-	clocks = <&clock CLK_PWM>;
-	clock-names = "timers";
-};
-
-&rtc {
-	clocks = <&clock CLK_RTC>;
-	clock-names = "rtc";
-	interrupt-parent = <&pmu_system_controller>;
-	status = "disabled";
-};
-
-&serial_0 {
-	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma0 13>, <&pdma0 14>;
-	dma-names = "rx", "tx";
-};
-
-&serial_1 {
-	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma1 15>, <&pdma1 16>;
-	dma-names = "rx", "tx";
-};
-
-&serial_2 {
-	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma0 15>, <&pdma0 16>;
-	dma-names = "rx", "tx";
-};
-
-&serial_3 {
-	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma1 17>, <&pdma1 18>;
-	dma-names = "rx", "tx";
-};
-
-&sss {
-	clocks = <&clock CLK_SSS>;
-	clock-names = "secss";
-};
-
-&trng {
-	clocks = <&clock CLK_SSS>;
-	clock-names = "secss";
-};
-
-#include "exynos5250-pinctrl.dtsi"
-#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
deleted file mode 100644
index 43e4a541f4798..0000000000000
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ /dev/null
@@ -1,585 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
- * tree nodes are listed in this file.
- */
-
-#include "exynos-pinctrl.h"
-
-&pinctrl_0 {
-	gpa0: gpa0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa2: gpa2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb0: gpb0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb1: gpb1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb2: gpb2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb3: gpb3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb4: gpb4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb5: gpb5-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd2: gpd2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe0: gpe0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe1: gpe1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk0: gpk0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx0: gpx0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx1: gpx1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx2: gpx2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data-pins {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	uart0_fctl: uart0-fctl-pins {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	uart1_data: uart1-data-pins {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	uart1_fctl: uart1-fctl-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	uart2_data: uart2-data-pins {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	spi0_bus: spi0-bus-pins {
-		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	spi1_bus: spi1-bus-pins {
-		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	usb3_vbus0_en: usb3-vbus0-en-pins {
-		samsung,pins = "gpa2-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	i2s1_bus: i2s1-bus-pins {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-				"gpb0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	pcm1_bus: pcm1-bus-pins {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-				"gpb0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	spdif1_bus: spdif1-bus-pins {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	spi2_bus: spi2-bus-pins {
-		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	i2c0_hs_bus: i2c0-hs-bus-pins {
-		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	i2c1_hs_bus: i2c1-hs-bus-pins {
-		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	i2c2_hs_bus: i2c2-hs-bus-pins {
-		samsung,pins = "gpb3-4", "gpb3-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	i2c3_hs_bus: i2c3-hs-bus-pins {
-		samsung,pins = "gpb3-6", "gpb3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	i2c4_bus: i2c4-bus-pins {
-		samsung,pins = "gpb4-0", "gpb4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	i2c5_bus: i2c5-bus-pins {
-		samsung,pins = "gpb4-2", "gpb4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	i2c6_bus: i2c6-bus-pins {
-		samsung,pins = "gpb4-4", "gpb4-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	i2c7_bus: i2c7-bus-pins {
-		samsung,pins = "gpb4-6", "gpb4-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	i2c8_bus: i2c8-bus-pins {
-		samsung,pins = "gpb5-0", "gpb5-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	i2c9_bus: i2c9-bus-pins {
-		samsung,pins = "gpb5-2", "gpb5-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	i2c10_bus: i2c10-bus-pins {
-		samsung,pins = "gpb5-4", "gpb5-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	i2c11_bus: i2c11-bus-pins {
-		samsung,pins = "gpb5-6", "gpb5-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	cam_gpio_a: cam-gpio-a-pins {
-		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-			"gpe1-0", "gpe1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	cam_gpio_b: cam-gpio-b-pins {
-		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	cam_i2c1_bus: cam-i2c1-bus-pins {
-		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	cam_i2c0_bus: cam-i2c0-bus-pins {
-		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	cam_spi0_bus: cam-spi0-bus-pins {
-		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-
-	cam_spi1_bus: cam-spi1-bus-pins {
-		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	gpc0: gpc0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc2: gpc2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc3: gpc3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc4: gpc4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk-pins {
-		samsung,pins = "gpc0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd0_cmd: sd0-cmd-pins {
-		samsung,pins = "gpc0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd0_bus1: sd0-bus-width1-pins {
-		samsung,pins = "gpc0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd0_bus4: sd0-bus-width4-pins {
-		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd0_bus8: sd0-bus-width8-pins {
-		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd0_rdqs: sd0-rdqs-pins {
-		samsung,pins = "gpc0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd1_clk: sd1-clk-pins {
-		samsung,pins = "gpc1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd1_cmd: sd1-cmd-pins {
-		samsung,pins = "gpc1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd1_bus1: sd1-bus-width1-pins {
-		samsung,pins = "gpc1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd1_bus4: sd1-bus-width4-pins {
-		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd1_bus8: sd1-bus-width8-pins {
-		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd2_clk: sd2-clk-pins {
-		samsung,pins = "gpc2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd2_cmd: sd2-cmd-pins {
-		samsung,pins = "gpc2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd2_cd: sd2-cd-pins {
-		samsung,pins = "gpc2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd2_bus1: sd2-bus-width1-pins {
-		samsung,pins = "gpc2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-
-	sd2_bus4: sd2-bus-width4-pins {
-		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
-	};
-};
-
-&pinctrl_2 {
-	gpz0: gpz0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpz1: gpz1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
deleted file mode 100644
index d072a7398866b..0000000000000
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung XYREF5260 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5260.dtsi"
-
-/ {
-	model = "Samsung XYREF5260 board based on Exynos5260";
-	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x80000000>;
-	};
-
-	aliases {
-		mmc0 = &mmc_0;
-		mmc1 = &mmc_2;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	ioclk_pcm: clock-pcm-ext {
-		compatible = "fixed-clock";
-		clock-frequency = <2048000>;
-		clock-output-names = "ioclk_pcm_extclk";
-		#clock-cells = <0>;
-	};
-
-	ioclk_i2s: clock-i2s-cd {
-		compatible = "fixed-clock";
-		clock-frequency = <147456000>;
-		clock-output-names = "ioclk_i2s_cdclk";
-		#clock-cells = <0>;
-	};
-
-	ioclk_spdif: clock-spdif-ext {
-		compatible = "fixed-clock";
-		clock-frequency = <49152000>;
-		clock-output-names = "ioclk_spdif_extclk";
-		#clock-cells = <0>;
-	};
-
-	xrtcxti: xrtcxti {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "xrtcxti";
-		#clock-cells = <0>;
-	};
-};
-
-&pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	broken-cd;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	card-detect-delay = <200>;
-	mmc-ddr-1_8v;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-};
-
-&mmc_2 {
-	status = "okay";
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-	disable-wp;
-};
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
deleted file mode 100644
index a97449b4640c7..0000000000000
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ /dev/null
@@ -1,554 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung Exynos5260 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-#include <dt-bindings/clock/exynos5260-clk.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "samsung,exynos5260", "samsung,exynos5";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		i2c0 = &hsi2c_0;
-		i2c1 = &hsi2c_1;
-		i2c2 = &hsi2c_2;
-		i2c3 = &hsi2c_3;
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-			};
-
-			cluster1 {
-				core0 {
-					cpu = <&cpu2>;
-				};
-				core1 {
-					cpu = <&cpu3>;
-				};
-				core2 {
-					cpu = <&cpu4>;
-				};
-				core3 {
-					cpu = <&cpu5>;
-				};
-			};
-		};
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu2: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu3: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu4: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu5: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			cci-control-port = <&cci_control0>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clock_top: clock-controller@10010000 {
-			compatible = "samsung,exynos5260-clock-top";
-			reg = <0x10010000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>,
-				 <&clock_mif MIF_DOUT_MEM_PLL>,
-				 <&clock_mif MIF_DOUT_BUS_PLL>,
-				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
-			clock-names = "fin_pll",
-				      "dout_mem_pll",
-				      "dout_bus_pll",
-				      "dout_media_pll";
-		};
-
-		clock_peri: clock-controller@10200000 {
-			compatible = "samsung,exynos5260-clock-peri";
-			reg = <0x10200000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>,
-				 <&ioclk_pcm>,
-				 <&ioclk_i2s>,
-				 <&ioclk_spdif>,
-				 <&fin_pll>,
-				 <&clock_top TOP_DOUT_ACLK_PERI_66>,
-				 <&clock_top TOP_DOUT_SCLK_PERI_UART0>,
-				 <&clock_top TOP_DOUT_SCLK_PERI_UART1>,
-				 <&clock_top TOP_DOUT_SCLK_PERI_UART2>,
-				 <&clock_top TOP_DOUT_SCLK_PERI_SPI0_B>,
-				 <&clock_top TOP_DOUT_SCLK_PERI_SPI1_B>,
-				 <&clock_top TOP_DOUT_SCLK_PERI_SPI2_B>,
-				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>;
-			clock-names = "fin_pll",
-				      "ioclk_pcm_extclk",
-				      "ioclk_i2s_cdclk",
-				      "ioclk_spdif_extclk",
-				      "phyclk_hdmi_phy_ref_cko",
-				      "dout_aclk_peri_66",
-				      "dout_sclk_peri_uart0",
-				      "dout_sclk_peri_uart1",
-				      "dout_sclk_peri_uart2",
-				      "dout_sclk_peri_spi0_b",
-				      "dout_sclk_peri_spi1_b",
-				      "dout_sclk_peri_spi2_b",
-				      "dout_aclk_peri_aud";
-		};
-
-		clock_egl: clock-controller@10600000 {
-			compatible = "samsung,exynos5260-clock-egl";
-			reg = <0x10600000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>,
-				 <&clock_mif MIF_DOUT_BUS_PLL>;
-			clock-names = "fin_pll",
-				      "dout_bus_pll";
-		};
-
-		clock_kfc: clock-controller@10700000 {
-			compatible = "samsung,exynos5260-clock-kfc";
-			reg = <0x10700000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>,
-				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
-			clock-names = "fin_pll",
-				      "dout_media_pll";
-		};
-
-		clock_g2d: clock-controller@10a00000 {
-			compatible = "samsung,exynos5260-clock-g2d";
-			reg = <0x10a00000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>,
-				 <&clock_top TOP_DOUT_ACLK_G2D_333>;
-			clock-names = "fin_pll",
-				      "dout_aclk_g2d_333";
-		};
-
-		clock_mif: clock-controller@10ce0000 {
-			compatible = "samsung,exynos5260-clock-mif";
-			reg = <0x10ce0000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>;
-			clock-names = "fin_pll";
-		};
-
-		clock_mfc: clock-controller@11090000 {
-			compatible = "samsung,exynos5260-clock-mfc";
-			reg = <0x11090000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>,
-				 <&clock_top TOP_DOUT_ACLK_MFC_333>;
-			clock-names = "fin_pll",
-				      "dout_aclk_mfc_333";
-		};
-
-		clock_g3d: clock-controller@11830000 {
-			compatible = "samsung,exynos5260-clock-g3d";
-			reg = <0x11830000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>;
-			clock-names = "fin_pll";
-		};
-
-		clock_fsys: clock-controller@122e0000 {
-			compatible = "samsung,exynos5260-clock-fsys";
-			reg = <0x122e0000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&clock_top TOP_DOUT_ACLK_FSYS_200>;
-			clock-names = "fin_pll",
-				      "phyclk_usbhost20_phy_phyclock",
-				      "phyclk_usbhost20_phy_freeclk",
-				      "phyclk_usbhost20_phy_clk48mohci",
-				      "phyclk_usbdrd30_udrd30_pipe_pclk",
-				      "phyclk_usbdrd30_udrd30_phyclock",
-				      "dout_aclk_fsys_200";
-		};
-
-		clock_aud: clock-controller@128c0000 {
-			compatible = "samsung,exynos5260-clock-aud";
-			reg = <0x128c0000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>,
-				 <&clock_top TOP_FOUT_AUD_PLL>,
-				 <&ioclk_i2s>,
-				 <&ioclk_pcm>;
-			clock-names = "fin_pll",
-				      "fout_aud_pll",
-				      "ioclk_i2s_cdclk",
-				      "ioclk_pcm_extclk";
-		};
-
-		clock_isp: clock-controller@133c0000 {
-			compatible = "samsung,exynos5260-clock-isp";
-			reg = <0x133c0000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>,
-				 <&clock_top TOP_DOUT_ACLK_ISP1_266>,
-				 <&clock_top TOP_DOUT_ACLK_ISP1_400>,
-				 <&clock_top TOP_MOUT_ACLK_ISP1_266>;
-			clock-names = "fin_pll",
-				      "dout_aclk_isp1_266",
-				      "dout_aclk_isp1_400",
-				      "mout_aclk_isp1_266";
-		};
-
-		clock_gscl: clock-controller@13f00000 {
-			compatible = "samsung,exynos5260-clock-gscl";
-			reg = <0x13f00000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>,
-				 <&clock_top TOP_DOUT_ACLK_GSCL_400>,
-				 <&clock_top TOP_DOUT_ACLK_GSCL_333>;
-			clock-names = "fin_pll",
-				      "dout_aclk_gscl_400",
-				      "dout_aclk_gscl_333";
-		};
-
-		clock_disp: clock-controller@14550000 {
-			compatible = "samsung,exynos5260-clock-disp";
-			reg = <0x14550000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&fin_pll>,
-				 <&ioclk_spdif>,
-				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>,
-				 <&clock_top TOP_DOUT_ACLK_DISP_222>,
-				 <&clock_top TOP_DOUT_SCLK_DISP_PIXEL>,
-				 <&clock_top TOP_DOUT_ACLK_DISP_333>;
-			clock-names = "fin_pll",
-				      "phyclk_dptx_phy_ch3_txd_clk",
-				      "phyclk_dptx_phy_ch2_txd_clk",
-				      "phyclk_dptx_phy_ch1_txd_clk",
-				      "phyclk_dptx_phy_ch0_txd_clk",
-				      "phyclk_hdmi_phy_tmds_clko",
-				      "phyclk_hdmi_phy_ref_clko",
-				      "phyclk_hdmi_phy_pixel_clko",
-				      "phyclk_hdmi_link_o_tmds_clkhi",
-				      "phyclk_mipi_dphy_4l_m_txbyte_clkhs",
-				      "phyclk_dptx_phy_o_ref_clk_24m",
-				      "phyclk_dptx_phy_clk_div2",
-				      "phyclk_mipi_dphy_4l_m_rxclkesc0",
-				      "phyclk_hdmi_phy_ref_cko",
-				      "ioclk_spdif_extclk",
-				      "dout_aclk_peri_aud",
-				      "dout_aclk_disp_222",
-				      "dout_sclk_disp_pixel",
-				      "dout_aclk_disp_333";
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,gic-400", "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x10481000 0x1000>,
-				<0x10482000 0x2000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <GIC_PPI 9
-					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		chipid: chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		mct: timer@100b0000 {
-			compatible = "samsung,exynos5260-mct",
-				     "samsung,exynos4210-mct";
-			reg = <0x100b0000 0x1000>;
-			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		cci: cci@10f00000 {
-			compatible = "arm,cci-400";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10f00000 0x1000>;
-			ranges = <0x0 0x10f00000 0x6000>;
-
-			cci_control0: slave-if@4000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x4000 0x1000>;
-			};
-
-			cci_control1: slave-if@5000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x5000 0x1000>;
-			};
-		};
-
-		pinctrl_0: pinctrl@11600000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x11600000 0x1000>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_1: pinctrl@12290000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x12290000 0x1000>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_2: pinctrl@128b0000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x128b0000 0x1000>;
-			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pmu_system_controller: system-controller@10d50000 {
-			compatible = "samsung,exynos5260-pmu", "syscon";
-			reg = <0x10d50000 0x10000>;
-		};
-
-		uart0: serial@12c00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12c00000 0x100>;
-			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart1: serial@12c10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12c10000 0x100>;
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart2: serial@12c20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12c20000 0x100>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart3: serial@12860000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12860000 0x100>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		mmc_0: mmc@12140000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12140000 0x2000>;
-			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			assigned-clocks =
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B>,
-				<&clock_top TOP_SCLK_MMC0>;
-			assigned-clock-parents =
-				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>;
-			assigned-clock-rates = <0>, <0>, <800000000>;
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12150000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12150000 0x2000>;
-			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			assigned-clocks =
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B>,
-				<&clock_top TOP_SCLK_MMC1>;
-			assigned-clock-parents =
-				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>;
-			assigned-clock-rates = <0>, <0>, <800000000>;
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12160000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12160000 0x2000>;
-			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			assigned-clocks =
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B>,
-				<&clock_top TOP_SCLK_MMC2>;
-			assigned-clock-parents =
-				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>;
-			assigned-clock-rates = <0>, <0>, <800000000>;
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		hsi2c_0: i2c@12da0000 {
-			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12da0000 0x1000>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_hs_bus>;
-			clocks = <&clock_peri PERI_CLK_HSIC0>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_1: i2c@12db0000 {
-			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12db0000 0x1000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_hs_bus>;
-			clocks = <&clock_peri PERI_CLK_HSIC1>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_2: i2c@12dc0000 {
-			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12dc0000 0x1000>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_hs_bus>;
-			clocks = <&clock_peri PERI_CLK_HSIC2>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_3: i2c@12dd0000 {
-			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12dd0000 0x1000>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c3_hs_bus>;
-			clocks = <&clock_peri PERI_CLK_HSIC3>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-	};
-};
-
-#include "exynos5260-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
deleted file mode 100644
index 882fc77c4bc44..0000000000000
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ /dev/null
@@ -1,664 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2016 Krzysztof Kozlowski
- */
-
-/dts-v1/;
-#include "exynos5410.dtsi"
-#include <dt-bindings/clock/maxim,max77802.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/sound/samsung-i2s.h>
-#include "exynos54xx-odroidxu-leds.dtsi"
-
-/ {
-	model = "Hardkernel Odroid XU";
-	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
-
-	aliases {
-		ethernet = &ethernet;
-		mmc0 = &mmc_0;
-		mmc1 = &mmc_2;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x7ea00000>;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	emmc_pwrseq: pwrseq {
-		pinctrl-0 = <&emmc_nrst_pin>;
-		pinctrl-names = "default";
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
-	};
-
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm 0 20972 0>;
-		#cooling-cells = <2>;
-		cooling-levels = <0 130 170 230>;
-	};
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	firmware@2073000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02073000 0x1000>;
-	};
-
-	sound: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,name = "Odroid-XU";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Speakers", "Speakers";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPL",
-			"Headphone Jack", "HPR",
-			"Headphone Jack", "MICBIAS",
-			"IN1", "Headphone Jack",
-			"Speakers", "SPKL",
-			"Speakers", "SPKR";
-
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&link0_codec>;
-		simple-audio-card,frame-master = <&link0_codec>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&audi2s0 0>;
-			system-clock-frequency = <19200000>;
-		};
-
-		link0_codec: simple-audio-card,codec {
-			sound-dai = <&max98090>;
-			clocks = <&audi2s0 CLK_I2S_CDCLK>;
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo10_reg>;
-	status = "okay";
-};
-
-&audi2s0 {
-	status = "okay";
-};
-
-&clock {
-	clocks = <&fin_pll>;
-	assigned-clocks = <&clock CLK_FOUT_EPLL>;
-	assigned-clock-rates = <192000000>;
-};
-
-&clock_audss {
-	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
-			<&clock_audss EXYNOS_MOUT_I2S>,
-			<&clock_audss EXYNOS_DOUT_SRP>,
-			<&clock_audss EXYNOS_DOUT_AUD_BUS>;
-
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
-			<&clock_audss EXYNOS_MOUT_AUDSS>;
-
-	assigned-clock-rates = <0>,
-			       <0>,
-			       <96000000>,
-			       <19200000>;
-};
-
-&cpu0_thermal {
-	polling-delay-passive = <0>;
-	polling-delay = <0>;
-
-	trips {
-		cpu_alert0: cpu-alert-0 {
-			temperature = <50000>; /* millicelsius */
-			hysteresis = <5000>; /* millicelsius */
-			type = "active";
-		};
-		cpu_alert1: cpu-alert-1 {
-			temperature = <60000>; /* millicelsius */
-			hysteresis = <5000>; /* millicelsius */
-			type = "active";
-		};
-		cpu_alert2: cpu-alert-2 {
-			temperature = <70000>; /* millicelsius */
-			hysteresis = <5000>; /* millicelsius */
-			type = "active";
-		};
-		cpu_crit0: cpu-crit-0 {
-			temperature = <120000>; /* millicelsius */
-			hysteresis = <0>; /* millicelsius */
-			type = "critical";
-		};
-	};
-
-	cooling-maps {
-		map0 {
-			trip = <&cpu_alert0>;
-			cooling-device = <&fan0 0 1>;
-		};
-		map1 {
-			trip = <&cpu_alert1>;
-			cooling-device = <&fan0 1 2>;
-		};
-		map2 {
-			trip = <&cpu_alert2>;
-			cooling-device = <&fan0 2 3>;
-		};
-	};
-};
-
-&hsi2c_4 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	usb3503: usb-hub@8 {
-		compatible = "smsc,usb3503";
-		reg = <0x08>;
-
-		intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
-		connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
-		initial-mode = <1>;
-
-		clock-names = "refclk";
-		clocks = <&pmu_system_controller 0>;
-		refclk-frequency = <24000000>;
-	};
-
-	max77802: pmic@9 {
-		compatible = "maxim,max77802";
-		reg = <0x9>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_NONE>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>;
-		wakeup-source;
-		#clock-cells = <1>;
-
-		inl1-supply = <&buck5_reg>;
-		inl2-supply = <&buck7_reg>;
-		inl3-supply = <&buck9_reg>;
-		inl4-supply = <&buck9_reg>;
-		inl5-supply = <&buck9_reg>;
-		inl6-supply = <&buck10_reg>;
-		inl7-supply = <&buck9_reg>;
-		/* inl9 supply is BOOST, not configured here */
-		inl10-supply = <&buck7_reg>;
-
-		regulators {
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "vdd_mem";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "vdd_kfc";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "buck7";
-				regulator-min-microvolt = <1300000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck8_reg: BUCK8 {
-				/* vdd_mmc0 */
-				regulator-name = "vddf_2v85";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "buck9";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck10_reg: BUCK10 {
-				regulator-name = "buck10";
-				regulator-min-microvolt = <2950000>;
-				regulator-max-microvolt = <2950000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo1_reg: LDO1 {
-				regulator-name = "vdd_alive";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "vddq_m1_m2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "vddq_gpio";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "vddq_mmc2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-				/* Having it off prevents reboot */
-				regulator-always-on;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "vdd18_hsic";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "vdd18_bpll";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "vddq_lcd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				/* Supplies also GPK and GPJ */
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "vdd10_hdmi";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "ldo9";
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "vdd18_mipi";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "vddq_mmc01";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				/*
-				 * Having it off prevents accessing MMC after
-				 * reboot with error:
-				 * MMC Device 1: Clock OFF has been failed.
-				 */
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "vdd33_usb3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "vddq_abbg0";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "vddq_abbg1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "vdd10_usb3";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "cam_sensor_core";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "ldo18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "ldo19";
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "vdd_mmc0";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo21_reg: LDO21 {
-				/* vdd_mmc2 */
-				regulator-name = "vddf_2v8";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "dp_p3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "cam_af";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "eth_p3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "usb30_extclk";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo27_reg: LDO27 {
-				regulator-name = "ldo27";
-			};
-
-			ldo28_reg: LDO28 {
-				regulator-name = "ldo28";
-			};
-
-			ldo29_reg: LDO29 {
-				regulator-name = "ldo29";
-			};
-
-			ldo30_reg: LDO30 {
-				regulator-name = "vddq_e1_e2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			/* On revisions with ti,ina231 this is sensor VS */
-			ldo32_reg: LDO32 {
-				regulator-name = "vs_power_meter";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo33_reg: LDO33 {
-				regulator-name = "ldo33";
-			};
-
-			ldo34_reg: LDO34 {
-				regulator-name = "ldo34";
-			};
-
-			ldo35_reg: LDO35 {
-				regulator-name = "ldo35";
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	status = "okay";
-	max98090: audio-codec@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupt-parent = <&gpj3>;
-		interrupts = <0 IRQ_TYPE_NONE>;
-		clocks = <&audi2s0 CLK_I2S_CDCLK>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-	};
-};
-
-&mmc_0 {
-	status = "okay";
-	mmc-pwrseq = <&emmc_pwrseq>;
-	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	vmmc-supply = <&ldo20_reg>;
-	vqmmc-supply = <&ldo11_reg>;
-};
-
-&mmc_2 {
-	status = "okay";
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	vmmc-supply = <&ldo21_reg>;
-	vqmmc-supply = <&ldo4_reg>;
-};
-
-&pinctrl_0 {
-	emmc_nrst_pin: emmc-nrst-pins {
-		samsung,pins = "gpd1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	sd2_wp: sd2-wp-pins {
-		samsung,pins = "gpm5-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		/* Pin is floating so be sure to disable write-protect */
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	pmic_dvs_2: pmic-dvs-2-pins {
-		samsung,pins = "gpx0-0", "gpx0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pmic_dvs_1: pmic-dvs-1-pins {
-		samsung,pins = "gpx0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-		samsung,pin-val = <1>;
-	};
-
-	max77802_irq: max77802-irq-pins {
-		samsung,pins = "gpx0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&pwm {
-	/*
-	 * PWM 0 -- fan
-	 * PWM 1 -- Green LED
-	 * PWM 2 -- Blue LED
-	 * PWM 3 -- on MIPI connector for backlight
-	 */
-	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&tmu_cpu0 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu1 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu2 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu3 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&usb3_0_oc {
-	/* External pull up */
-	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-};
-
-&usb3_1_oc {
-	/* External pull up */
-	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "peripheral";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-};
-
-&usbdrd3_0 {
-	vdd33-supply = <&ldo12_reg>;
-	vdd10-supply = <&ldo15_reg>;
-};
-
-&usbdrd3_1 {
-	vdd33-supply = <&ldo12_reg>;
-	vdd10-supply = <&ldo15_reg>;
-};
-
-&usbhost2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	ethernet: ethernet@2 {
-		compatible = "usb424,9730";
-		reg = <2>;
-		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
deleted file mode 100644
index f7b9233828922..0000000000000
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ /dev/null
@@ -1,652 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Exynos5410 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2013 Hardkernel Co., Ltd.
- *              https://www.hardkernel.com
- */
-
-#include "exynos-pinctrl.h"
-
-&pinctrl_0 {
-	gpa0: gpa0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa2: gpa2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb0: gpb0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb1: gpb1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb2: gpb2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb3: gpb3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc3: gpc3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc2: gpc2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm5: gpm5-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpd1: gpd1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe0: gpe0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe1: gpe1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg0: gpg0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg1: gpg1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg2: gpg2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gph0: gph0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gph1: gph1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm7: gpm7-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy0: gpy0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy1: gpy1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy2: gpy2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy3: gpy3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy4: gpy4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy5: gpy5-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy6: gpy6-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy7: gpy7-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpx0: gpx0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&combiner>;
-		#interrupt-cells = <2>;
-		interrupts = <23 0>,
-			     <24 0>,
-			     <25 0>,
-			     <25 1>,
-			     <26 0>,
-			     <26 1>,
-			     <27 0>,
-			     <27 1>;
-	};
-
-	gpx1: gpx1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&combiner>;
-		#interrupt-cells = <2>;
-		interrupts = <28 0>,
-			     <28 1>,
-			     <29 0>,
-			     <29 1>,
-			     <30 0>,
-			     <30 1>,
-			     <31 0>,
-			     <31 1>;
-	};
-
-	gpx2: gpx2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data-pins {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	uart0_fctl: uart0-fctl-pins {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	uart1_data: uart1-data-pins {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	uart1_fctl: uart1-fctl-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c2_bus: i2c2-bus-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	uart2_data: uart2-data-pins {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	uart2_fctl: uart2-fctl-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c3_bus: i2c3-bus-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	uart3_data: uart3-data-pins {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c4_hs_bus: i2c4-hs-bus-pins {
-		samsung,pins = "gpa2-0", "gpa2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c5_hs_bus: i2c5-hs-bus-pins {
-		samsung,pins = "gpa2-2", "gpa2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c6_hs_bus: i2c6-hs-bus-pins {
-		samsung,pins = "gpb1-3", "gpb1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pwm0_out: pwm0-out-pins {
-		samsung,pins = "gpb2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pwm1_out: pwm1-out-pins {
-		samsung,pins = "gpb2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pwm2_out: pwm2-out-pins {
-		samsung,pins = "gpb2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pwm3_out: pwm3-out-pins {
-		samsung,pins = "gpb2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c7_hs_bus: i2c7-hs-bus-pins {
-		samsung,pins = "gpb2-2", "gpb2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c0_bus: i2c0-bus-pins {
-		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c1_bus: i2c1-bus-pins {
-		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	sd0_clk: sd0-clk-pins {
-		samsung,pins = "gpc0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd0_cmd: sd0-cmd-pins {
-		samsung,pins = "gpc0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd0_cd: sd0-cd-pins {
-		samsung,pins = "gpc0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd0_bus1: sd0-bus-width1-pins {
-		samsung,pins = "gpc0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd0_bus4: sd0-bus-width4-pins {
-		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd2_clk: sd2-clk-pins {
-		samsung,pins = "gpc2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd2_cmd: sd2-cmd-pins {
-		samsung,pins = "gpc2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd2_cd: sd2-cd-pins {
-		samsung,pins = "gpc2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd2_bus1: sd2-bus-width1-pins {
-		samsung,pins = "gpc2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd2_bus4: sd2-bus-width4-pins {
-		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd0_bus8: sd0-bus-width8-pins {
-		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-};
-
-&pinctrl_1 {
-	gpj0: gpj0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj1: gpj1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj2: gpj2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj3: gpj3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj4: gpj4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk0: gpk0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk1: gpk1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk2: gpk2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk3: gpk3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	usb3_1_oc: usb3-1-oc-pins {
-		samsung,pins = "gpk2-4", "gpk2-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	usb3_1_vbusctrl: usb3-1-vbusctrl-pins {
-		samsung,pins = "gpk2-6", "gpk2-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	usb3_0_oc: usb3-0-oc-pins {
-		samsung,pins = "gpk3-0", "gpk3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	usb3_0_vbusctrl: usb3-0-vbusctrl-pins {
-		samsung,pins = "gpk3-2", "gpk3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_2 {
-	gpv0: gpv0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv1: gpv1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv2: gpv2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv3: gpv3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv4: gpv4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
-
-&pinctrl_3 {
-	gpz: gpz-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	audi2s0_bus: audi2s0-bus-pins {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-};
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
deleted file mode 100644
index bb29b76f6f6a9..0000000000000
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung SMDK5410 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5410.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-/ {
-	model = "Samsung SMDK5410 board based on Exynos5410";
-	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		mmc0 = &mmc_0;
-		mmc1 = &mmc_2;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	pmic_ap_clk: pmic-ap-clk {
-		/* Workaround for missing PMIC and its clock */
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-
-	firmware@2037000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02037000 0x1000>;
-	};
-
-	vdd10_usb3: voltage-regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD10_USB3";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-	};
-
-	vdd33_usb3: voltage-regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD33_USB3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&mmc_0 {
-	status = "okay";
-	cap-mmc-highspeed;
-	broken-cd;
-	card-detect-delay = <200>;
-	mmc-ddr-1_8v;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	bus-width = <8>;
-};
-
-&mmc_2 {
-	status = "okay";
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	bus-width = <4>;
-	disable-wp;
-};
-
-&pinctrl_0 {
-	srom_ctl: srom-ctl-pins {
-		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
-			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	srom_ebi: srom-ebi-pins {
-		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
-			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
-			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
-			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
-			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
-			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&rtc {
-	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sromc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
-
-	ethernet@3,0 {
-		compatible = "smsc,lan9115";
-		reg = <3 0 0x10000>;
-		phy-mode = "mii";
-		interrupt-parent = <&gpx0>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		reg-io-width = <2>;
-		smsc,irq-push-pull;
-		smsc,force-internal-phy;
-
-		samsung,srom-page-mode;
-		samsung,srom-timing = <9 12 1 9 1 1>;
-	};
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	vdd10-supply = <&vdd10_usb3>;
-	vdd33-supply = <&vdd33_usb3>;
-};
-
-&usbdrd3_1 {
-	vdd10-supply = <&vdd10_usb3>;
-	vdd33-supply = <&vdd33_usb3>;
-};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
deleted file mode 100644
index 350b8afa0a3a0..0000000000000
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ /dev/null
@@ -1,440 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung Exynos5410 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung Exynos5410 SoC device nodes are listed in this file.
- * Exynos5410 based board files can include this file and provide
- * values for board specfic bindings.
- */
-
-#include "exynos54xx.dtsi"
-#include <dt-bindings/clock/exynos5410.h>
-#include <dt-bindings/clock/exynos-audss-clk.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	compatible = "samsung,exynos5410", "samsung,exynos5";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			clock-frequency = <1600000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			clock-frequency = <1600000000>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x2>;
-			clock-frequency = <1600000000>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x3>;
-			clock-frequency = <1600000000>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5410-pmu", "syscon";
-			reg = <0x10040000 0x5000>;
-			clock-names = "clkout16";
-			clocks = <&fin_pll>;
-			#clock-cells = <1>;
-		};
-
-		clock: clock-controller@10010000 {
-			compatible = "samsung,exynos5410-clock";
-			reg = <0x10010000 0x30000>;
-			#clock-cells = <1>;
-		};
-
-		clock_audss: audss-clock-controller@3810000 {
-			compatible = "samsung,exynos5410-audss-clock";
-			reg = <0x03810000 0x0c>;
-			#clock-cells = <1>;
-			clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>;
-			clock-names = "pll_ref", "pll_in";
-		};
-
-		tmu_cpu0: tmu@10060000 {
-			compatible = "samsung,exynos5420-tmu";
-			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>;
-			clock-names = "tmu_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		tmu_cpu1: tmu@10064000 {
-			compatible = "samsung,exynos5420-tmu";
-			reg = <0x10064000 0x100>;
-			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>;
-			clock-names = "tmu_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		tmu_cpu2: tmu@10068000 {
-			compatible = "samsung,exynos5420-tmu";
-			reg = <0x10068000 0x100>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>;
-			clock-names = "tmu_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		tmu_cpu3: tmu@1006c000 {
-			compatible = "samsung,exynos5420-tmu";
-			reg = <0x1006c000 0x100>;
-			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>;
-			clock-names = "tmu_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		mmc_0: mmc@12200000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12200000 0x1000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12210000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12210000 0x1000>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12220000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12220000 0x1000>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		pinctrl_0: pinctrl@13400000 {
-			compatible = "samsung,exynos5410-pinctrl";
-			reg = <0x13400000 0x1000>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_1: pinctrl@14000000 {
-			compatible = "samsung,exynos5410-pinctrl";
-			reg = <0x14000000 0x1000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_2: pinctrl@10d10000 {
-			compatible = "samsung,exynos5410-pinctrl";
-			reg = <0x10d10000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_3: pinctrl@3860000 {
-			compatible = "samsung,exynos5410-pinctrl";
-			reg = <0x03860000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pdma0: dma-controller@121a0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121a0000 0x1000>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		pdma1: dma-controller@121b0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121b0000 0x1000>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		audi2s0: i2s@3830000 {
-			compatible = "samsung,exynos5420-i2s";
-			reg = <0x03830000 0x100>;
-			dmas = <&pdma0 10>,
-				<&pdma0 9>,
-				<&pdma0 8>;
-			dma-names = "tx", "rx", "tx-sec";
-			clocks = <&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_SCLK_I2S>;
-			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-			#clock-cells = <1>;
-			clock-output-names = "i2s_cdclk0";
-			#sound-dai-cells = <1>;
-			samsung,idma-addr = <0x03000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&audi2s0_bus>;
-			status = "disabled";
-		};
-	};
-
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0>;
-			#include "exynos5420-trip-points.dtsi"
-		};
-		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1>;
-			#include "exynos5420-trip-points.dtsi"
-		};
-		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2>;
-			#include "exynos5420-trip-points.dtsi"
-		};
-		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3>;
-			#include "exynos5420-trip-points.dtsi"
-		};
-	};
-};
-
-&adc {
-	clocks = <&clock CLK_TSADC>;
-	clock-names = "adc";
-	samsung,syscon-phandle = <&pmu_system_controller>;
-};
-
-&arm_a15_pmu {
-	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	status = "okay";
-};
-
-&i2c_0 {
-	clocks = <&clock CLK_I2C0>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_bus>;
-};
-
-&i2c_1 {
-	clocks = <&clock CLK_I2C1>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_bus>;
-};
-
-&i2c_2 {
-	clocks = <&clock CLK_I2C2>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_bus>;
-};
-
-&i2c_3 {
-	clocks = <&clock CLK_I2C3>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_bus>;
-};
-
-&hsi2c_4 {
-	clocks = <&clock CLK_USI0>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_hs_bus>;
-};
-
-&hsi2c_5 {
-	clocks = <&clock CLK_USI1>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_hs_bus>;
-};
-
-&hsi2c_6 {
-	clocks = <&clock CLK_USI2>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c6_hs_bus>;
-};
-
-&hsi2c_7 {
-	clocks = <&clock CLK_USI3>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c7_hs_bus>;
-};
-
-&mct {
-	clocks = <&fin_pll>, <&clock CLK_MCT>;
-	clock-names = "fin_pll", "mct";
-};
-
-&prng {
-	clocks = <&clock CLK_SSS>;
-	clock-names = "secss";
-};
-
-&pwm {
-	clocks = <&clock CLK_PWM>;
-	clock-names = "timers";
-};
-
-&rtc {
-	clocks = <&clock CLK_RTC>;
-	clock-names = "rtc";
-	status = "disabled";
-};
-
-&serial_0 {
-	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma0 13>, <&pdma0 14>;
-	dma-names = "rx", "tx";
-};
-
-&serial_1 {
-	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma1 15>, <&pdma1 16>;
-	dma-names = "rx", "tx";
-};
-
-&serial_2 {
-	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma0 15>, <&pdma0 16>;
-	dma-names = "rx", "tx";
-};
-
-&serial_3 {
-	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma1 17>, <&pdma1 18>;
-	dma-names = "rx", "tx";
-};
-
-&sss {
-	clocks = <&clock CLK_SSS>;
-	clock-names = "secss";
-};
-
-&sromc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	ranges = <0 0 0x04000000 0x20000
-		  1 0 0x05000000 0x20000
-		  2 0 0x06000000 0x20000
-		  3 0 0x07000000 0x20000>;
-};
-
-&trng {
-	clocks = <&clock CLK_SSS>;
-	clock-names = "secss";
-};
-
-&usbdrd3_0 {
-	clocks = <&clock CLK_USBD300>;
-	clock-names = "usbdrd30";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>;
-};
-
-&usbdrd_phy0 {
-	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-	clock-names = "phy", "ref";
-	samsung,pmu-syscon = <&pmu_system_controller>;
-};
-
-&usbdrd3_1 {
-	clocks = <&clock CLK_USBD301>;
-	clock-names = "usbdrd30";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>;
-};
-
-&usbdrd_dwc3_1 {
-	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbdrd_phy1 {
-	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-	clock-names = "phy", "ref";
-	samsung,pmu-syscon = <&pmu_system_controller>;
-};
-
-&usbhost1 {
-	clocks = <&clock CLK_USBH20>;
-	clock-names = "usbhost";
-};
-
-&usbhost2 {
-	clocks = <&clock CLK_USBH20>;
-	clock-names = "usbhost";
-};
-
-&usb2_phy {
-	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-	clock-names = "phy", "ref";
-	samsung,sysreg-phandle = <&sysreg_system_controller>;
-	samsung,pmureg-phandle = <&pmu_system_controller>;
-};
-
-&watchdog {
-	clocks = <&clock CLK_WDT>;
-	clock-names = "watchdog";
-	samsung,syscon-phandle = <&pmu_system_controller>;
-};
-
-#include "exynos5410-pinctrl.dtsi"
-#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
deleted file mode 100644
index 809ddda02e538..0000000000000
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ /dev/null
@@ -1,843 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos5420 based Arndale Octa board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5420.dtsi"
-#include "exynos5420-cpus.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/clock/samsung,s2mps11.h>
-
-/ {
-	model = "Insignal Arndale Octa evaluation board based on Exynos5420";
-	compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x80000000>;
-	};
-
-	aliases {
-		mmc0 = &mmc_0;
-		mmc1 = &mmc_2;
-	};
-
-	chosen {
-		stdout-path = "serial3:115200n8";
-	};
-
-	firmware@2073000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02073000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-wakeup {
-			label = "SW-TACT1";
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo4_reg>;
-	status = "okay";
-};
-
-&cci {
-	status = "disabled";
-};
-
-&cpu0 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&cpu4 {
-	cpu-supply = <&buck6_reg>;
-};
-
-&cpu0_thermal {
-	trips {
-		cpu0_alert0: cpu-alert-0 {
-			temperature = <60000>; /* millicelsius */
-			hysteresis = <5000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu0_alert1: cpu-alert-1 {
-			temperature = <80000>; /* millicelsius */
-			hysteresis = <10000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu0_alert2: cpu-alert-2 {
-			temperature = <110000>; /* millicelsius */
-			hysteresis = <10000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu0_crit0: cpu-crit-0 {
-			temperature = <120000>; /* millicelsius */
-			hysteresis = <0>; /* millicelsius */
-			type = "critical";
-		};
-	};
-
-	cooling-maps {
-		/*
-		 * Reduce the CPU speed by 2 steps, down to: 1600 MHz
-		 * and 1100 MHz.
-		 */
-		map0 {
-			trip = <&cpu0_alert0>;
-			cooling-device = <&cpu0 0 2>,
-					 <&cpu1 0 2>,
-					 <&cpu2 0 2>,
-					 <&cpu3 0 2>,
-					 <&cpu4 0 2>,
-					 <&cpu5 0 2>,
-					 <&cpu6 0 2>,
-					 <&cpu7 0 2>;
-		};
-
-		/*
-		 * Reduce the CPU speed down to 1200 MHz big (6 steps)
-		 * and 800 MHz LITTLE (5 steps).
-		 */
-		map1 {
-			trip = <&cpu0_alert1>;
-			cooling-device = <&cpu0 3 6>,
-					 <&cpu1 3 6>,
-					 <&cpu2 3 6>,
-					 <&cpu3 3 6>,
-					 <&cpu4 3 5>,
-					 <&cpu5 3 5>,
-					 <&cpu6 3 5>,
-					 <&cpu7 3 5>;
-		};
-
-		/*
-		 * Reduce the CPU speed as much as possible, down to 700 MHz
-		 * big (11 steps) and 600 MHz LITTLE (7 steps).
-		 */
-		map2 {
-			trip = <&cpu0_alert2>;
-			cooling-device = <&cpu0 6 11>,
-					 <&cpu1 6 11>,
-					 <&cpu2 6 11>,
-					 <&cpu3 6 11>,
-					 <&cpu4 5 7>,
-					 <&cpu5 5 7>,
-					 <&cpu6 5 7>,
-					 <&cpu7 5 7>;
-		};
-	};
-};
-
-&cpu1_thermal {
-	trips {
-		cpu1_alert0: cpu-alert-0 {
-			temperature = <60000>; /* millicelsius */
-			hysteresis = <5000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu1_alert1: cpu-alert-1 {
-			temperature = <80000>; /* millicelsius */
-			hysteresis = <10000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu1_alert2: cpu-alert-2 {
-			temperature = <110000>; /* millicelsius */
-			hysteresis = <10000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu1_crit0: cpu-crit-0 {
-			temperature = <120000>; /* millicelsius */
-			hysteresis = <0>; /* millicelsius */
-			type = "critical";
-		};
-	};
-
-	cooling-maps {
-		map0 {
-			trip = <&cpu1_alert0>;
-			cooling-device = <&cpu0 0 2>,
-					 <&cpu1 0 2>,
-					 <&cpu2 0 2>,
-					 <&cpu3 0 2>,
-					 <&cpu4 0 2>,
-					 <&cpu5 0 2>,
-					 <&cpu6 0 2>,
-					 <&cpu7 0 2>;
-		};
-
-		map1 {
-			trip = <&cpu1_alert1>;
-			cooling-device = <&cpu0 3 6>,
-					 <&cpu1 3 6>,
-					 <&cpu2 3 6>,
-					 <&cpu3 3 6>,
-					 <&cpu4 3 5>,
-					 <&cpu5 3 5>,
-					 <&cpu6 3 5>,
-					 <&cpu7 3 5>;
-		};
-
-		map2 {
-			trip = <&cpu1_alert2>;
-			cooling-device = <&cpu0 6 11>,
-					 <&cpu1 6 11>,
-					 <&cpu2 6 11>,
-					 <&cpu3 6 11>,
-					 <&cpu4 5 7>,
-					 <&cpu5 5 7>,
-					 <&cpu6 5 7>,
-					 <&cpu7 5 7>;
-		};
-	};
-};
-
-&cpu2_thermal {
-	trips {
-		cpu2_alert0: cpu-alert-0 {
-			temperature = <60000>; /* millicelsius */
-			hysteresis = <5000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu2_alert1: cpu-alert-1 {
-			temperature = <80000>; /* millicelsius */
-			hysteresis = <10000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu2_alert2: cpu-alert-2 {
-			temperature = <110000>; /* millicelsius */
-			hysteresis = <10000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu2_crit0: cpu-crit-0 {
-			temperature = <120000>; /* millicelsius */
-			hysteresis = <0>; /* millicelsius */
-			type = "critical";
-		};
-	};
-
-	cooling-maps {
-		map0 {
-			trip = <&cpu2_alert0>;
-			cooling-device = <&cpu0 0 2>,
-					 <&cpu1 0 2>,
-					 <&cpu2 0 2>,
-					 <&cpu3 0 2>,
-					 <&cpu4 0 2>,
-					 <&cpu5 0 2>,
-					 <&cpu6 0 2>,
-					 <&cpu7 0 2>;
-		};
-
-		map1 {
-			trip = <&cpu2_alert1>;
-			cooling-device = <&cpu0 3 6>,
-					 <&cpu1 3 6>,
-					 <&cpu2 3 6>,
-					 <&cpu3 3 6>,
-					 <&cpu4 3 5>,
-					 <&cpu5 3 5>,
-					 <&cpu6 3 5>,
-					 <&cpu7 3 5>;
-		};
-
-		map2 {
-			trip = <&cpu2_alert2>;
-			cooling-device = <&cpu0 6 11>,
-					 <&cpu1 6 11>,
-					 <&cpu2 6 11>,
-					 <&cpu3 6 11>,
-					 <&cpu4 6 7>,
-					 <&cpu5 6 7>,
-					 <&cpu6 6 7>,
-					 <&cpu7 6 7>;
-		};
-	};
-};
-
-&cpu3_thermal {
-	trips {
-		cpu3_alert0: cpu-alert-0 {
-			temperature = <60000>; /* millicelsius */
-			hysteresis = <5000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu3_alert1: cpu-alert-1 {
-			temperature = <80000>; /* millicelsius */
-			hysteresis = <10000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu3_alert2: cpu-alert-2 {
-			temperature = <110000>; /* millicelsius */
-			hysteresis = <10000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu3_crit0: cpu-crit-0 {
-			temperature = <120000>; /* millicelsius */
-			hysteresis = <0>; /* millicelsius */
-			type = "critical";
-		};
-	};
-
-	cooling-maps {
-		map0 {
-			trip = <&cpu3_alert0>;
-			cooling-device = <&cpu0 0 2>,
-					 <&cpu1 0 2>,
-					 <&cpu2 0 2>,
-					 <&cpu3 0 2>,
-					 <&cpu4 0 2>,
-					 <&cpu5 0 2>,
-					 <&cpu6 0 2>,
-					 <&cpu7 0 2>;
-		};
-
-		map1 {
-			trip = <&cpu3_alert1>;
-			cooling-device = <&cpu0 3 6>,
-					 <&cpu1 3 6>,
-					 <&cpu2 3 6>,
-					 <&cpu3 3 6>,
-					 <&cpu4 3 5>,
-					 <&cpu5 3 5>,
-					 <&cpu6 3 5>,
-					 <&cpu7 3 5>;
-		};
-
-		map2 {
-			trip = <&cpu3_alert2>;
-			cooling-device = <&cpu0 6 11>,
-					 <&cpu1 6 11>,
-					 <&cpu2 6 11>,
-					 <&cpu3 6 11>,
-					 <&cpu4 5 7>,
-					 <&cpu5 5 7>,
-					 <&cpu6 5 7>,
-					 <&cpu7 5 7>;
-		};
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	vdd_osc-supply = <&ldo7_reg>;
-	vdd_pll-supply = <&ldo6_reg>;
-	vdd-supply = <&ldo6_reg>;
-	ddc = <&i2c_2>;
-	status = "okay";
-};
-
-&hsi2c_4 {
-	status = "okay";
-
-	pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&s2mps11_irq>;
-		wakeup-source;
-
-		s2mps11_osc: clocks {
-			compatible = "samsung,s2mps11-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s2mps11_ap",
-					"s2mps11_cp", "s2mps11_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "PVDD_ALIVE_1V0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "PVDD_APIO_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "PVDD_APIO_MMCON_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				/*
-				 * Must be always on, even though there is
-				 * a consumer (mmc_0).  Otherwise the board
-				 * does not reboot with vendor U-Boot
-				 * (Linaro for Arndale Octa, v2012.07).
-				 */
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "PVDD_ADC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "PVDD_PLL_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "PVDD_ANAIP_1V0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "PVDD_ANAIP_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "PVDD_ABB_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "PVDD_USB_3V3";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "PVDD_PRE_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "PVDD_USB_1V0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "PVDD_HSIC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "PVDD_APIO_MMCOFF_2V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo14_reg: LDO14 {
-				/* Unused */
-				regulator-name = "PVDD_LDO14";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "PVDD_PERI_2V8";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "PVDD_PERI_3V3";
-				regulator-min-microvolt = <2200000>;
-				regulator-max-microvolt = <2200000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo17_reg: LDO17 {
-				/* Unused */
-				regulator-name = "PVDD_LDO17";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "PVDD_EMMC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				/*
-				 * Must stay in "off" mode during shutdown for
-				 * proper eMMC reset.  The "off" mode is in
-				 * fact controlled by LDO18EN.  The eMMC does
-				 * not have reset pin connected so the reset
-				 * will be triggered by falling edge of
-				 * LDO18EN.
-				 */
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "PVDD_TFLASH_2V8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "PVDD_BTWIFI_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "PVDD_CAM1IO_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo22_reg: LDO22 {
-				/* Unused */
-				regulator-name = "PVDD_LDO22";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2375000>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "PVDD_MIFS_1V1";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "PVDD_CAM1_AVDD_2V8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo25_reg: LDO25 {
-				/* Unused */
-				regulator-name = "PVDD_LDO25";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "PVDD_CAM0_AF_2V8";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo27_reg: LDO27 {
-				regulator-name = "PVDD_G3DS_1V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo28_reg: LDO28 {
-				regulator-name = "PVDD_TSP_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo29_reg: LDO29 {
-				regulator-name = "PVDD_AUDIO_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo30_reg: LDO30 {
-				/* Unused */
-				regulator-name = "PVDD_LDO30";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo31_reg: LDO31 {
-				regulator-name = "PVDD_PERI_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo32_reg: LDO32 {
-				regulator-name = "PVDD_LCD_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo33_reg: LDO33 {
-				regulator-name = "PVDD_CAM0IO_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo34_reg: LDO34 {
-				/* Unused */
-				regulator-name = "PVDD_LDO34";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo35_reg: LDO35 {
-				regulator-name = "PVDD_CAM0_DVDD_1V2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo36_reg: LDO36 {
-				/* Unused */
-				regulator-name = "PVDD_LDO36";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo37_reg: LDO37 {
-				/* Unused */
-				regulator-name = "PVDD_LDO37";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo38_reg: LDO38 {
-				regulator-name = "PVDD_CAM0_AVDD_2V8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "PVDD_MIF_1V1";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "PVDD_ARM_1V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "PVDD_INT_1V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "PVDD_G3D_1V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "PVDD_LPDDR3_1V2";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "PVDD_KFC_1V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "VIN_LLDO_1V4";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "VIN_MLDO_2V0";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2100000>;
-				regulator-always-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "VIN_HLDO_3V5";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3500000>;
-				regulator-always-on;
-			};
-
-			buck10_reg: BUCK10 {
-				regulator-name = "PVDD_EMMCF_2V8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				/*
-				 * Must stay in "off" mode during shutdown for
-				 * proper eMMC reset.  The "off" mode is in
-				 * fact controlled by BUCK10EN.  The eMMC does
-				 * not have reset pin connected so the reset
-				 * will be triggered by falling edge of
-				 * BUCK10EN.
-				 */
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&i2c_2 {
-	status = "okay";
-};
-
-&mixer {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	non-removable;
-	card-detect-delay = <200>;
-	mmc-ddr-1_8v;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	vmmc-supply = <&ldo18_reg>;
-	vqmmc-supply = <&ldo3_reg>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-};
-
-&mmc_2 {
-	status = "okay";
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	vmmc-supply = <&ldo19_reg>;
-	vqmmc-supply = <&ldo13_reg>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	sd-uhs-ddr50;
-};
-
-&pinctrl_0 {
-	s2mps11_irq: s2mps11-irq-pins {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-};
-
-&usbdrd3_0 {
-	vdd10-supply = <&ldo11_reg>;
-	vdd33-supply = <&ldo9_reg>;
-};
-
-&usbdrd3_1 {
-	vdd10-supply = <&ldo11_reg>;
-	vdd33-supply = <&ldo9_reg>;
-};
diff --git a/arch/arm/boot/dts/exynos5420-chagall-wifi.dts b/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
deleted file mode 100644
index 1319344a2c740..0000000000000
--- a/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos5420 Chagall WiFi board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2022 Henrik Grimler
- */
-
-/dts-v1/;
-#include "exynos5420-galaxy-tab-common.dtsi"
-
-/ {
-	model = "Samsung Chagall WiFi based on Exynos5420";
-	compatible = "samsung,chagall-wifi", "samsung,exynos5420", \
-		     "samsung,exynos5";
-};
-
-&ldo15_reg {
-	/* Unused */
-	regulator-name = "VDD_LDO15";
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-};
-
-&ldo17_reg {
-	regulator-name = "VDD_IRLED_3V3";
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3350000>;
-	regulator-always-on;
-	regulator-boot-on;
-
-	regulator-state-mem {
-		regulator-off-in-suspend;
-	};
-};
-
-&ldo28_reg {
-	/* Unused */
-	regulator-name = "VDD_LDO28";
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-};
-
-&ldo29_reg {
-	regulator-name = "VDD_TCON_1V8";
-	regulator-min-microvolt = <1900000>;
-	regulator-max-microvolt = <1900000>;
-
-	regulator-state-mem {
-		regulator-off-in-suspend;
-	};
-};
-
-&ldo31_reg {
-	regulator-name = "VDD_GRIP_1V8";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-	regulator-boot-on;
-
-	regulator-state-mem {
-		regulator-off-in-suspend;
-	};
-};
-
-&ldo32_reg {
-	regulator-name = "VDD_TSP_1V8";
-	regulator-min-microvolt = <1900000>;
-	regulator-max-microvolt = <1900000>;
-
-	regulator-state-mem {
-		regulator-off-in-suspend;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
deleted file mode 100644
index e9f4eb75b50f2..0000000000000
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung Exynos5420 SoC cpu device tree source
- *
- * Copyright (c) 2015 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This file provides desired ordering for Exynos5420 and Exynos5800
- * boards: CPU[0123] being the A15.
- *
- * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
- * but particular boards choose different booting order.
- *
- * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
- * booting cluster (big or LITTLE) is chosen by IROM code by reading
- * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
- * from the LITTLE: Cortex-A7.
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-				core2 {
-					cpu = <&cpu2>;
-				};
-				core3 {
-					cpu = <&cpu3>;
-				};
-			};
-
-			cluster1 {
-				core0 {
-					cpu = <&cpu4>;
-				};
-				core1 {
-					cpu = <&cpu5>;
-				};
-				core2 {
-					cpu = <&cpu6>;
-				};
-				core3 {
-					cpu = <&cpu7>;
-				};
-			};
-		};
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <1024>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <1024>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x2>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <1024>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x3>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <1024>;
-		};
-
-		cpu4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clocks = <&clock CLK_KFC_CLK>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <539>;
-		};
-
-		cpu5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clocks = <&clock CLK_KFC_CLK>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <539>;
-		};
-
-		cpu6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clocks = <&clock CLK_KFC_CLK>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <539>;
-		};
-
-		cpu7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clocks = <&clock CLK_KFC_CLK>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <539>;
-		};
-	};
-};
-
-&arm_a7_pmu {
-	interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
-	status = "okay";
-};
-
-&arm_a15_pmu {
-	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
deleted file mode 100644
index f525b2f5e4e08..0000000000000
--- a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
+++ /dev/null
@@ -1,696 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Base DT for Samsung's family of tablets based on Exynos5420.
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2022 Henrik Grimler
- */
-
-/dts-v1/;
-#include "exynos5420.dtsi"
-#include "exynos5420-cpus.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/samsung,s2mps11.h>
-
-/ {
-	chassis-type = "tablet";
-
-	/*
-	 * To successfully boot the mainline kernel with the stock
-	 * bootloader (SBOOT), the tlb needs to be flushed after the
-	 * page table pointer has been updated in __common_mmu_cache_on.
-	 * The same hack is also needed to boot exynos4412-i9300 with
-	 * stock bootloader, and probably other Samsung devices of
-	 * similar age.  See
-	 * https://lore.kernel.org/all/1355276466-18295-1-git-send-email-arve@android.com
-	 * for more details.
-	 */
-
-	aliases {
-		mmc0 = &mmc_0;
-		mmc2 = &mmc_2;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0xc0000000>;
-	};
-
-	firmware@2073000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02073000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-power {
-			debounce-interval = <10>;
-			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
-			label = "Power";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		key-home {
-			debounce-interval = <10>;
-			gpios = <&gpx0 5 GPIO_ACTIVE_LOW>;
-			label = "Home";
-			linux,code = <KEY_HOME>;
-			wakeup-source;
-		};
-
-		key-volume-up {
-			debounce-interval = <10>;
-			gpios = <&gpx0 2 GPIO_ACTIVE_LOW>;
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		key-volume-down {
-			debounce-interval = <10>;
-			gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
-			label = "Volume Down";
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-};
-
-&cci {
-	/* CCI is disabled in hardware */
-	status = "disabled";
-};
-
-&cpu0 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&cpu4 {
-	cpu-supply = <&buck6_reg>;
-};
-
-&gpu {
-	status = "okay";
-	mali-supply = <&buck4_reg>;
-};
-
-&hsi2c_7 {
-	status = "okay";
-
-	pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&s2mps11_irq>;
-
-		s2mps11_osc: clocks {
-			compatible = "samsung,s2mps11-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s2mps11_ap", "s2mps11_cp",
-					     "s2mps11_bt";
-		};
-
-		regulators {
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_MIF_1V1";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VDD_ARM_1V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VDD_INT_1V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VDD_G3D_1V0";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VDD_MEM_1V2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "VDD_KFC_1V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "VIN_LLDO_1V4";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "VIN_MLDO_2V0";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2100000>;
-				regulator-always-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "VIN_HLDO_3V5";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3500000>;
-				regulator-always-on;
-			};
-
-			buck10_reg: BUCK10 {
-				regulator-name = "VDD_CAM_ISP_1V0";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3550000>;
-			};
-
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ALIVE_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_APIO_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VDD_APIO_MMC01_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VDD_ADC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo5_reg: LDO5 {
-				/* Unused */
-				regulator-name = "VDD_LDO5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VDD_MIPI_1V0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VDD_MIPI_PLL_ABB1_18V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo8_reg: LDO8 {
-				/* Unused */
-				regulator-name = "VDD_LDO8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "VDD_UOTG_3V0";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VDDQ_PRE_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VDD_HSIC_1V0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "VDD_HSIC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VDD_APIO_MMC2_2V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VDD_MOTOR_3V0";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VDD_LDO15";
-				/*
-				 * LDO15 varies between devices and is
-				 * specified in the device dts
-				 */
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VDD_AP_2V8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "VDD_LDO17";
-				/*
-				 * LDO17 varies between devices and is
-				 * specified in the device dts
-				 */
-			};
-
-			ldo18_reg: LDO18 {
-				/* Unused */
-				regulator-name = "VDD_LDO18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "VDD_VTF_2V8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "VDD_CAM1_CAM_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "VDD_CAM_IO_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "VDD_CAM0_S_CORE_1V1";
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1200000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "VDD_MIFS_1V1";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "VDD_TSP_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo25_reg: LDO25 {
-				/* Unused */
-				regulator-name = "VDD_LDO25";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "VDD_CAM0_AF_2V8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo27_reg: LDO27 {
-				regulator-name = "VDD_G3DS_1V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo28_reg: LDO28 {
-				regulator-name = "VDD_LDO28";
-				/*
-				 * LDO28 varies between devices and is
-				 * specified in the device dts
-				 */
-			};
-
-			ldo29_reg: LDO29 {
-				regulator-name = "VDD_LDO29";
-				/*
-				 * LDO29 varies between devices and is
-				 * specified in the device dts
-				 */
-			};
-
-			ldo30_reg: LDO30 {
-				regulator-name = "VDD_TOUCH_1V8";
-				regulator-min-microvolt = <1900000>;
-				regulator-max-microvolt = <1900000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo31_reg: LDO31 {
-				regulator-name = "VDD_LDO31";
-				/*
-				 * LDO31 varies between devices and is
-				 * specified in the device dts
-				 */
-			};
-
-			ldo32_reg: LDO32 {
-				regulator-name = "VDD_LDO32";
-				/*
-				 * LDO32 varies between devices and is
-				 * specified in the device dts
-				 */
-			};
-
-			ldo33_reg: LDO33 {
-				regulator-name = "VDD_MHL_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo34_reg: LDO34 {
-				regulator-name = "VDD_MHL_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo35_reg: LDO35 {
-				regulator-name = "VDD_SIL_1V2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo36_reg: LDO36 {
-				/* Unused */
-				regulator-name = "VDD_LDO36";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo37_reg: LDO37 {
-				/* Unused */
-				regulator-name = "VDD_LDO37";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo38_reg: LDO38 {
-				regulator-name = "VDD_KEY_LED_3V3";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&mixer {
-	status = "okay";
-};
-
-/* Internal storage */
-&mmc_0 {
-	status = "okay";
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	card-detect-delay = <200>;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	non-removable;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	pinctrl-names = "default";
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	vqmmc-supply = <&ldo3_reg>;
-};
-
-/* External sdcard */
-&mmc_2 {
-	status = "okay";
-	bus-width = <4>;
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	cd-gpios = <&gpx2 4 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &mmc2_cd &sd2_bus1 &sd2_bus4>;
-	pinctrl-names = "default";
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	sd-uhs-sdr50;
-	vmmc-supply = <&ldo19_reg>;
-	vqmmc-supply = <&ldo13_reg>;
-};
-
-&pinctrl_0 {
-	mmc2_cd: mmc2-cd-pins {
-		samsung,pins = "gpx2-4";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	s2mps11_irq: s2mps11-irq-pins {
-		samsung,pins = "gpx3-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&tmu_cpu0 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu1 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu2 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu3 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_gpu {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "peripheral";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "peripheral";
-};
-
-&usbdrd3_0 {
-	vdd33-supply = <&ldo9_reg>;
-	vdd10-supply = <&ldo11_reg>;
-};
-
-&usbdrd3_1 {
-	vdd33-supply = <&ldo9_reg>;
-	vdd10-supply = <&ldo11_reg>;
-};
diff --git a/arch/arm/boot/dts/exynos5420-klimt-wifi.dts b/arch/arm/boot/dts/exynos5420-klimt-wifi.dts
deleted file mode 100644
index 011787b1bbf0d..0000000000000
--- a/arch/arm/boot/dts/exynos5420-klimt-wifi.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos5420 Klimt WiFi board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2022 Henrik Grimler
- */
-
-/dts-v1/;
-#include "exynos5420-galaxy-tab-common.dtsi"
-
-/ {
-	model = "Samsung Klimt WiFi based on Exynos5420";
-	compatible = "samsung,klimt-wifi", "samsung,exynos5420", \
-		     "samsung,exynos5";
-};
-
-&ldo15_reg {
-	/* Unused */
-	regulator-name = "VDD_LDO15";
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-};
-
-&ldo17_reg {
-	regulator-name = "VDD_VCI_3V0";
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-
-	regulator-state-mem {
-		regulator-off-in-suspend;
-	};
-};
-
-&ldo28_reg {
-	regulator-name = "VDD3_1V8";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-
-	regulator-state-mem {
-		regulator-off-in-suspend;
-	};
-};
-
-&ldo29_reg {
-	regulator-name = "VDDR_1V6";
-	regulator-min-microvolt = <1600000>;
-	regulator-max-microvolt = <1600000>;
-
-	regulator-state-mem {
-		regulator-off-in-suspend;
-	};
-};
-
-&ldo31_reg {
-	/* Unused */
-	regulator-name = "VDD_LDO31";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&ldo32_reg {
-	regulator-name = "VDD_TSP_1V8";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-
-	regulator-state-mem {
-		regulator-off-in-suspend;
-	};
-};
-
-&mmc_2 {
-	sd-uhs-sdr104;
-};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
deleted file mode 100644
index 7a48f2b328193..0000000000000
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ /dev/null
@@ -1,1126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Google Peach Pit Rev 6+ board device tree source
- *
- * Copyright (c) 2014 Google, Inc
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/maxim,max77802.h>
-#include <dt-bindings/regulator/maxim,max77802.h>
-#include <dt-bindings/sound/samsung-i2s.h>
-#include "exynos5420.dtsi"
-#include "exynos5420-cpus.dtsi"
-
-/ {
-	model = "Google Peach Pit Rev 6+";
-
-	compatible = "google,pit-rev16",
-		"google,pit-rev15", "google,pit-rev14",
-		"google,pit-rev13", "google,pit-rev12",
-		"google,pit-rev11", "google,pit-rev10",
-		"google,pit-rev9", "google,pit-rev8",
-		"google,pit-rev7", "google,pit-rev6",
-		"google,pit", "google,peach","samsung,exynos5420",
-		"samsung,exynos5";
-	chassis-type = "laptop";
-
-	aliases {
-		/* Assign 20 so we don't get confused w/ builtin ones */
-		i2c20 = &i2c_tunnel;
-		mmc0 = &mmc_0; /* eMMC */
-		mmc1 = &mmc_2; /* uSD */
-		mmc2 = &mmc_1; /* WiFi */
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		power-supply = <&tps65090_fet1>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-	};
-
-	chosen {
-		stdout-path = "serial3:115200n8";
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq &lid_irq>;
-
-		power-key {
-			label = "Power";
-			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		lid-switch {
-			label = "Lid";
-			gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0>; /* SW_LID */
-			debounce-interval = <1>;
-			wakeup-source;
-		};
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x80000000>;
-	};
-
-	sound {
-		compatible = "google,snow-audio-max98090";
-
-		samsung,model = "Peach-Pit-I2S-MAX98090";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&max98090>;
-
-		cpu {
-			sound-dai = <&i2s0 0>;
-		};
-
-		codec {
-			sound-dai = <&max98090>, <&hdmi>;
-		};
-	};
-
-	usb300_vbus_reg: regulator-usb300 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb300_vbus_en>;
-		enable-active-high;
-	};
-
-	usb301_vbus_reg: regulator-usb301 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb301_vbus_en>;
-		enable-active-high;
-	};
-
-	vbat: fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat-supply";
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	panel: panel {
-		compatible = "auo,b116xw03";
-		power-supply = <&tps65090_fet6>;
-		backlight = <&backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&bridge_out>;
-			};
-		};
-	};
-
-	mmc1_pwrseq: mmc1-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
-		clocks = <&max77802 MAX77802_CLK_32K_CP>;
-		clock-names = "ext_clock";
-	};
-};
-
-&adc {
-	status = "okay";
-	vdd-supply = <&ldo9_reg>;
-};
-
-&clock_audss {
-	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
-};
-
-&cpu0 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&cpu4 {
-	cpu-supply = <&buck6_reg>;
-};
-
-&dp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd_gpio>;
-	samsung,color-space = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x06>;
-	samsung,lane-count = <2>;
-	hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-
-	ports {
-		port {
-			dp_out: endpoint {
-				remote-endpoint = <&bridge_in>;
-			};
-		};
-	};
-};
-
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
-};
-
-&hdmi {
-	status = "okay";
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	ddc = <&i2c_2>;
-
-	hdmi-en-supply = <&tps65090_fet7>;
-	vdd-supply = <&ldo8_reg>;
-	vdd_osc-supply = <&ldo10_reg>;
-	vdd_pll-supply = <&ldo8_reg>;
-};
-
-&hsi2c_4 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	max77802: pmic@9 {
-		compatible = "maxim,max77802";
-		interrupt-parent = <&gpx3>;
-		interrupts = <1 IRQ_TYPE_NONE>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
-			    <&pmic_dvs_1>, <&pmic_dvs_2>;
-		wakeup-source;
-		reg = <0x9>;
-		#clock-cells = <1>;
-
-		inb1-supply = <&tps65090_dcdc2>;
-		inb2-supply = <&tps65090_dcdc1>;
-		inb3-supply = <&tps65090_dcdc2>;
-		inb4-supply = <&tps65090_dcdc2>;
-		inb5-supply = <&tps65090_dcdc1>;
-		inb6-supply = <&tps65090_dcdc2>;
-		inb7-supply = <&tps65090_dcdc1>;
-		inb8-supply = <&tps65090_dcdc1>;
-		inb9-supply = <&tps65090_dcdc1>;
-		inb10-supply = <&tps65090_dcdc1>;
-
-		inl1-supply = <&buck5_reg>;
-		inl2-supply = <&buck7_reg>;
-		inl3-supply = <&buck9_reg>;
-		inl4-supply = <&buck9_reg>;
-		inl5-supply = <&buck9_reg>;
-		inl6-supply = <&tps65090_dcdc2>;
-		inl7-supply = <&buck9_reg>;
-		inl9-supply = <&tps65090_dcdc2>;
-		inl10-supply = <&buck7_reg>;
-
-		regulators {
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <12500>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <12500>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <12500>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <12500>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "vdd_1v2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "vdd_kfc";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <12500>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "vdd_1v35";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "vdd_emmc";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "vdd_2v";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			buck10_reg: BUCK10 {
-				regulator-name = "vdd_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo1_reg: LDO1 {
-				regulator-name = "vdd_1v0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-mode = <MAX77802_OPMODE_LP>;
-				};
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "vdd_1v2_2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "vdd_1v8_3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-mode = <MAX77802_OPMODE_LP>;
-				};
-			};
-
-			vqmmc_sdcard: ldo4_reg: LDO4 {
-				regulator-name = "vdd_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "vdd_1v8_5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "vdd_1v8_6";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "vdd_1v8_7";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "vdd_ldo8";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "vdd_ldo9";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-mode = <MAX77802_OPMODE_LP>;
-				};
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "vdd_ldo10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-mode = <MAX77802_OPMODE_LP>;
-				};
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "vdd_ldo12";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "vdd_ldo13";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-mode = <MAX77802_OPMODE_LP>;
-				};
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "vdd_ldo14";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "vdd_ldo15";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "vdd_g3ds";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "ldo_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "ldo_19";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "ldo_20";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "ldo_21";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "ldo_23";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-			ldo24_reg: LDO24 {
-				regulator-name = "ldo_24";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "ldo_25";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "ldo_26";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo27_reg: LDO27 {
-				regulator-name = "ldo_27";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo28_reg: LDO28 {
-				regulator-name = "ldo_28";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo29_reg: LDO29 {
-				regulator-name = "ldo_29";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo30_reg: LDO30 {
-				regulator-name = "vdd_mifs";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo32_reg: LDO32 {
-				regulator-name = "ldo_32";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo33_reg: LDO33 {
-				regulator-name = "ldo_33";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo34_reg: LDO34 {
-				regulator-name = "ldo_34";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo35_reg: LDO35 {
-				regulator-name = "ldo_35";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-		};
-	};
-};
-
-&hsi2c_7 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	max98090: audio-codec@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupts = <2 IRQ_TYPE_NONE>;
-		interrupt-parent = <&gpx0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max98090_irq>;
-		clocks = <&pmu_system_controller 0>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-	};
-
-	light-sensor@44 {
-		compatible = "isil,isl29018";
-		reg = <0x44>;
-		vcc-supply = <&tps65090_fet5>;
-	};
-
-	ps8625: lvds-bridge@48 {
-		compatible = "parade,ps8625";
-		reg = <0x48>;
-		sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
-		lane-count = <2>;
-		use-external-pwm;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				bridge_in: endpoint {
-					remote-endpoint = <&dp_out>;
-				};
-			};
-		};
-
-	};
-};
-
-&hsi2c_8 {
-	status = "okay";
-	clock-frequency = <333000>;
-
-	/* Atmel mXT336S */
-	trackpad@4b {
-		compatible = "atmel,maxtouch";
-		reg = <0x4b>;
-		interrupt-parent = <&gpx1>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-		pinctrl-names = "default";
-		pinctrl-0 = <&trackpad_irq>;
-		linux,gpio-keymap = <KEY_RESERVED
-				     KEY_RESERVED
-				     KEY_RESERVED	/* GPIO0 */
-				     KEY_RESERVED	/* GPIO1 */
-				     KEY_RESERVED	/* GPIO2 */
-				     BTN_LEFT>;		/* GPIO3 */
-	};
-};
-
-&hsi2c_9 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-
-		/* Unused irq; but still need to configure the pins */
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpm_irq>;
-	};
-};
-
-&i2c_2 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	samsung,i2c-slave-addr = <0x50>;
-};
-
-&i2s0 {
-	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
-	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
-	status = "okay";
-};
-
-&mixer {
-	status = "okay";
-};
-
-/* eMMC flash */
-&mmc_0 {
-	status = "okay";
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	cap-mmc-highspeed;
-	non-removable;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 2>;
-	samsung,read-strobe-delay = <90>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
-	bus-width = <8>;
-};
-
-/* WiFi SDIO module */
-&mmc_1 {
-	status = "okay";
-	non-removable;
-	cap-sdio-irq;
-	keep-power-in-suspend;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <1>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
-		    <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	mmc-pwrseq = <&mmc1_pwrseq>;
-	vqmmc-supply = <&buck10_reg>;
-};
-
-/* uSD card */
-&mmc_2 {
-	status = "okay";
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-};
-
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mask_tpm_reset>;
-
-	wifi_en: wifi-en-pins {
-		samsung,pins = "gpx0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	max98090_irq: max98090-irq-pins {
-		samsung,pins = "gpx0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset-pins {
-		samsung,pins = "gpx0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-		samsung,pin-val = <0>;
-	};
-
-	tpm_irq: tpm-irq-pins {
-		samsung,pins = "gpx1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	trackpad_irq: trackpad-irq-pins {
-		samsung,pins = "gpx1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	power_key_irq: power-key-irq-pins {
-		samsung,pins = "gpx1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	ec_irq: ec-irq-pins {
-		samsung,pins = "gpx1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	tps65090_irq: tps65090-irq-pins {
-		samsung,pins = "gpx2-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	dp_hpd_gpio: dp-hpd-gpio-pins {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	max77802_irq: max77802-irq-pins {
-		samsung,pins = "gpx3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	lid_irq: lid-irq-pins {
-		samsung,pins = "gpx3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pmic_dvs_1: pmic-dvs-1-pins {
-		samsung,pins = "gpy7-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-/* pinctrl_1 */
-/* Adjust WiFi drive strengths lower for EMI */
-&sd1_bus1 {
-	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-};
-
-&sd1_bus4 {
-	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-};
-
-&sd1_bus8 {
-	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-};
-
-&sd1_clk {
-	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-};
-
-&sd1_cmd {
-	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-};
-
-&pinctrl_2 {
-	pmic_dvs_2: pmic-dvs-2-pins {
-		samsung,pins = "gpj4-2", "gpj4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-/* pinctrl_3*/
-/* Drive SPI lines at x2 for better integrity */
-&spi2_bus {
-	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-};
-
-&pinctrl_3 {
-	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs-pins {
-		samsung,pins = "gpb1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
-
-	usb300_vbus_en: usb300-vbus-en-pins {
-		samsung,pins = "gph0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	usb301_vbus_en: usb301-vbus-en-pins {
-		samsung,pins = "gph0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pmic_selb: pmic-selb-pins {
-		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
-			       "gph0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&pmu_system_controller {
-	assigned-clocks = <&pmu_system_controller 0>;
-	assigned-clock-parents = <&clock CLK_FIN_PLL>;
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&spi_2 {
-	status = "okay";
-	num-cs = <1>;
-	samsung,spi-src-clk = <0>;
-	cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
-
-	cros_ec: cros-ec@0 {
-		compatible = "google,cros-ec-spi";
-		interrupt-parent = <&gpx1>;
-		interrupts = <5 IRQ_TYPE_NONE>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ec_spi_cs &ec_irq>;
-		reg = <0>;
-		spi-max-frequency = <3125000>;
-		google,has-vbc-nvram;
-
-		controller-data {
-			samsung,spi-feedback-delay = <1>;
-		};
-
-		i2c_tunnel: i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			google,remote-bus = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-				sbs,i2c-retry-count = <2>;
-			};
-
-			power-regulator@48 {
-				compatible = "ti,tps65090";
-				reg = <0x48>;
-
-				/*
-				 * Config irq to disable internal pulls
-				 * even though we run in polling mode.
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&tps65090_irq>;
-
-				vsys1-supply = <&vbat>;
-				vsys2-supply = <&vbat>;
-				vsys3-supply = <&vbat>;
-				infet1-supply = <&vbat>;
-				infet2-supply = <&tps65090_dcdc1>;
-				infet3-supply = <&tps65090_dcdc2>;
-				infet4-supply = <&tps65090_dcdc2>;
-				infet5-supply = <&tps65090_dcdc2>;
-				infet6-supply = <&tps65090_dcdc2>;
-				infet7-supply = <&tps65090_dcdc1>;
-				vsys-l1-supply = <&vbat>;
-				vsys-l2-supply = <&vbat>;
-
-				regulators {
-					tps65090_dcdc1: dcdc1 {
-						ti,enable-ext-control;
-					};
-					tps65090_dcdc2: dcdc2 {
-						ti,enable-ext-control;
-					};
-					tps65090_dcdc3: dcdc3 {
-						ti,enable-ext-control;
-					};
-					tps65090_fet1: fet1 {
-						regulator-name = "vcd_led";
-					};
-					tps65090_fet2: fet2 {
-						regulator-name = "video_mid";
-						regulator-always-on;
-					};
-					tps65090_fet3: fet3 {
-						regulator-name = "wwan_r";
-						regulator-always-on;
-					};
-					tps65090_fet4: fet4 {
-						regulator-name = "sdcard";
-						regulator-always-on;
-					};
-					tps65090_fet5: fet5 {
-						regulator-name = "camout";
-						regulator-always-on;
-					};
-					tps65090_fet6: fet6 {
-						regulator-name = "lcd_vdd";
-					};
-					tps65090_fet7: fet7 {
-						regulator-name = "video_mid_1a";
-						regulator-always-on;
-					};
-					tps65090_ldo1: ldo1 {
-					};
-					tps65090_ldo2: ldo2 {
-					};
-				};
-
-				charger {
-					compatible = "ti,tps65090-charger";
-				};
-			};
-		};
-	};
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&timer {
-	arm,cpu-registers-not-fw-configured;
-};
-
-&tmu_cpu0 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu1 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu2 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu3 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_gpu {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&usbdrd3_0 {
-	vdd10-supply = <&ldo15_reg>;
-	vdd33-supply = <&ldo12_reg>;
-};
-
-&usbdrd3_1 {
-	vdd10-supply = <&ldo15_reg>;
-	vdd33-supply = <&ldo12_reg>;
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "host";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-};
-
-&usbdrd_phy0 {
-	vbus-supply = <&usb300_vbus_reg>;
-};
-
-&usbdrd_phy1 {
-	vbus-supply = <&usb301_vbus_reg>;
-};
-
-/*
- * Use longest HW watchdog in SoC (32 seconds) since the hardware
- * watchdog provides no debugging information (compared to soft/hard
- * lockup detectors) and so should be last resort.
- */
-&watchdog {
-	timeout-sec = <32>;
-};
-
-#include "cros-ec-keyboard.dtsi"
-#include "cros-adc-thermistors.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
deleted file mode 100644
index 14cf9c4ca0ed7..0000000000000
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ /dev/null
@@ -1,734 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device
- * tree nodes are listed in this file.
- */
-
-#include "exynos-pinctrl.h"
-
-&pinctrl_0 {
-	gpy7: gpy7-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx0: gpx0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&combiner>;
-		#interrupt-cells = <2>;
-		interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
-			     <26 0>, <26 1>, <27 0>, <27 1>;
-	};
-
-	gpx1: gpx1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&combiner>;
-		#interrupt-cells = <2>;
-		interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
-			     <30 0>, <30 1>, <31 0>, <31 1>;
-	};
-
-	gpx2: gpx2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	dp_hpd: dp-hpd-pins {
-		samsung,pins = "gpx0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	hdmi_cec: hdmi-cec-pins {
-		samsung,pins = "gpx3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	gpc0: gpc0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc2: gpc2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc3: gpc3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc4: gpc4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpy0: gpy0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy1: gpy1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy2: gpy2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy3: gpy3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy4: gpy4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy5: gpy5-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy6: gpy6-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk-pins {
-		samsung,pins = "gpc0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd0_cmd: sd0-cmd-pins {
-		samsung,pins = "gpc0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd0_cd: sd0-cd-pins {
-		samsung,pins = "gpc0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd0_bus1: sd0-bus-width1-pins {
-		samsung,pins = "gpc0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd0_bus4: sd0-bus-width4-pins {
-		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd0_bus8: sd0-bus-width8-pins {
-		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd0_rclk: sd0-rclk-pins {
-		samsung,pins = "gpc0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd1_clk: sd1-clk-pins {
-		samsung,pins = "gpc1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd1_cmd: sd1-cmd-pins {
-		samsung,pins = "gpc1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd1_cd: sd1-cd-pins {
-		samsung,pins = "gpc1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd1_int: sd1-int-pins {
-		samsung,pins = "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	sd1_bus1: sd1-bus-width1-pins {
-		samsung,pins = "gpc1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd1_bus4: sd1-bus-width4-pins {
-		samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd1_bus8: sd1-bus-width8-pins {
-		samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd2_clk: sd2-clk-pins {
-		samsung,pins = "gpc2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd2_cmd: sd2-cmd-pins {
-		samsung,pins = "gpc2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd2_cd: sd2-cd-pins {
-		samsung,pins = "gpc2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd2_bus1: sd2-bus-width1-pins {
-		samsung,pins = "gpc2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd2_bus4: sd2-bus-width4-pins {
-		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-
-	sd2_wp: sd2-wp-pins {
-		samsung,pins = "gpc4-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
-	};
-};
-
-&pinctrl_2 {
-	gpe0: gpe0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe1: gpe1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg0: gpg0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg1: gpg1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg2: gpg2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj4: gpj4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	cam_gpio_a: cam-gpio-a-pins {
-		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-			       "gpe1-0", "gpe1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	cam_gpio_b: cam-gpio-b-pins {
-		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	cam_i2c2_bus: cam-i2c2-bus-pins {
-		samsung,pins = "gpf0-4", "gpf0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	cam_spi1_bus: cam-spi1-bus-pins {
-		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	cam_i2c1_bus: cam-i2c1-bus-pins {
-		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	cam_i2c0_bus: cam-i2c0-bus-pins {
-		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	cam_spi0_bus: cam-spi0-bus-pins {
-		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	cam_bayrgb_bus: cam-bayrgb-bus-pins {
-		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
-			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
-			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
-			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
-			       "gpg2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_3 {
-	gpa0: gpa0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa2: gpa2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb0: gpb0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb1: gpb1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb2: gpb2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb3: gpb3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb4: gpb4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gph0: gph0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data-pins {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	uart0_fctl: uart0-fctl-pins {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	uart1_data: uart1-data-pins {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	uart1_fctl: uart1-fctl-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c2_bus: i2c2-bus-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	uart2_data: uart2-data-pins {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	uart2_fctl: uart2-fctl-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c3_bus: i2c3-bus-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	uart3_data: uart3-data-pins {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	spi0_bus: spi0-bus-pins {
-		samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	spi1_bus: spi1-bus-pins {
-		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c4_hs_bus: i2c4-hs-bus-pins {
-		samsung,pins = "gpa2-0", "gpa2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c5_hs_bus: i2c5-hs-bus-pins {
-		samsung,pins = "gpa2-2", "gpa2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2s1_bus: i2s1-bus-pins {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-			       "gpb0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pcm1_bus: pcm1-bus-pins {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-			       "gpb0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2s2_bus: i2s2-bus-pins {
-		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-			       "gpb1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pcm2_bus: pcm2-bus-pins {
-		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-			       "gpb1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	spdif_bus: spdif-bus-pins {
-		samsung,pins = "gpb1-0", "gpb1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	spi2_bus: spi2-bus-pins {
-		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c6_hs_bus: i2c6-hs-bus-pins {
-		samsung,pins = "gpb1-3", "gpb1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pwm0_out: pwm0-out-pins {
-		samsung,pins = "gpb2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pwm1_out: pwm1-out-pins {
-		samsung,pins = "gpb2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pwm2_out: pwm2-out-pins {
-		samsung,pins = "gpb2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pwm3_out: pwm3-out-pins {
-		samsung,pins = "gpb2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c7_hs_bus: i2c7-hs-bus-pins {
-		samsung,pins = "gpb2-2", "gpb2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c0_bus: i2c0-bus-pins {
-		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c1_bus: i2c1-bus-pins {
-		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c8_hs_bus: i2c8-hs-bus-pins {
-		samsung,pins = "gpb3-4", "gpb3-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c9_hs_bus: i2c9-hs-bus-pins {
-		samsung,pins = "gpb3-6", "gpb3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	i2c10_hs_bus: i2c10-hs-bus-pins {
-		samsung,pins = "gpb4-0", "gpb4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_4 {
-	gpz: gpz-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	i2s0_bus: i2s0-bus-pins {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
deleted file mode 100644
index e299344e427a4..0000000000000
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ /dev/null
@@ -1,435 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung SMDK5420 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5420.dtsi"
-#include "exynos5420-cpus.dtsi"
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Samsung SMDK5420 board based on Exynos5420";
-	compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x80000000>;
-	};
-
-	aliases {
-		mmc0 = &mmc_0;
-		mmc1 = &mmc_2;
-	};
-
-	chosen {
-		bootargs = "init=/linuxrc";
-		stdout-path = "serial2:115200n8";
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	vdd: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-supply";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	dbvdd: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "dbvdd-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	spkvdd: regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "spkvdd-supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	usb300_vbus_reg: regulator-3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpg0 5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb300_vbus_en>;
-		enable-active-high;
-	};
-
-	usb301_vbus_reg: regulator-4 {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpg1 4 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb301_vbus_en>;
-		enable-active-high;
-	};
-
-};
-
-&cpu0 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&cpu4 {
-	cpu-supply = <&buck6_reg>;
-};
-
-&dp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd>;
-	samsung,color-space = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <4>;
-	status = "okay";
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing {
-			clock-frequency = <50000>;
-			hactive = <2560>;
-			vactive = <1600>;
-			hfront-porch = <48>;
-			hback-porch = <80>;
-			hsync-len = <32>;
-			vback-porch = <16>;
-			vfront-porch = <8>;
-			vsync-len = <6>;
-		};
-	};
-};
-
-&fimd {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-	ddc = <&i2c_2>;
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	vdd-supply = <&ldo6_reg>;
-	vdd_osc-supply = <&ldo7_reg>;
-	vdd_pll-supply = <&ldo6_reg>;
-};
-
-&hsi2c_4 {
-	status = "okay";
-
-	pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-		wakeup-source;
-
-		s2mps11_osc: clocks {
-			compatible = "samsung,s2mps11-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s2mps11_ap",
-					"s2mps11_cp", "s2mps11_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "vdd_ldo1";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "vdd_ldo3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "vdd_ldo5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "vdd_ldo6";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "vdd_ldo7";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "vdd_ldo8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "vdd_ldo9";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "vdd_ldo10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "vdd_ldo12";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "vdd_ldo13";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "vdd_ldo15";
-				regulator-min-microvolt = <3100000>;
-				regulator-max-microvolt = <3100000>;
-				regulator-always-on;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "vdd_ldo16";
-				regulator-min-microvolt = <2200000>;
-				regulator-max-microvolt = <2200000>;
-				regulator-always-on;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "tsp_avdd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "vdd_sd";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "tsp_io";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "vdd_mem";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "vdd_kfc";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "vdd_1.0v_ldo";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "vdd_1.8v_ldo";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "vdd_2.8v_ldo";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3750000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck10_reg: BUCK10 {
-				regulator-name = "vdd_vmem";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&i2c_2 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	/* used by HDMI DDC */
-	status = "okay";
-};
-
-&mixer {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	broken-cd;
-	card-detect-delay = <200>;
-	mmc-ddr-1_8v;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 2>;
-	samsung,read-strobe-delay = <90>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8
-		     &sd0_rclk>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&mmc_2 {
-	status = "okay";
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-};
-
-&pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_2 {
-	usb300_vbus_en: usb300-vbus-en-pins {
-		samsung,pins = "gpg0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	usb301_vbus_en: usb301-vbus-en-pins {
-		samsung,pins = "gpg1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&usbdrd3_0 {
-	vdd10-supply = <&ldo11_reg>;
-	vdd33-supply = <&ldo9_reg>;
-};
-
-&usbdrd3_1 {
-	vdd10-supply = <&ldo11_reg>;
-	vdd33-supply = <&ldo9_reg>;
-};
-
-&usbdrd_phy0 {
-	vbus-supply = <&usb300_vbus_reg>;
-};
-
-&usbdrd_phy1 {
-	vbus-supply = <&usb301_vbus_reg>;
-};
diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
deleted file mode 100644
index a67a380717ec3..0000000000000
--- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for default Exynos5420 thermal zone definition
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- */
-
-polling-delay-passive = <0>;
-polling-delay = <0>;
-trips {
-	cpu-alert-0 {
-		temperature = <85000>; /* millicelsius */
-		hysteresis = <10000>; /* millicelsius */
-		type = "active";
-	};
-	cpu-alert-1 {
-		temperature = <103000>; /* millicelsius */
-		hysteresis = <10000>; /* millicelsius */
-		type = "active";
-	};
-	cpu-alert-2 {
-		temperature = <110000>; /* millicelsius */
-		hysteresis = <10000>; /* millicelsius */
-		type = "active";
-	};
-	cpu-crit-0 {
-		temperature = <120000>; /* millicelsius */
-		hysteresis = <0>; /* millicelsius */
-		type = "critical";
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
deleted file mode 100644
index dd291f1199f28..0000000000000
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ /dev/null
@@ -1,1397 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung Exynos5420 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung Exynos5420 SoC device nodes are listed in this file.
- * Exynos5420 based board files can include this file and provide
- * values for board specfic bindings.
- */
-
-#include "exynos54xx.dtsi"
-#include <dt-bindings/clock/exynos5420.h>
-#include <dt-bindings/clock/exynos-audss-clk.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	compatible = "samsung,exynos5420", "samsung,exynos5";
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		pinctrl4 = &pinctrl_4;
-		i2c8 = &hsi2c_8;
-		i2c9 = &hsi2c_9;
-		i2c10 = &hsi2c_10;
-		gsc0 = &gsc_0;
-		gsc1 = &gsc_1;
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-	};
-
-	bus_disp1: bus-disp1 {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_disp1_fimd: bus-disp1-fimd {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_fsys: bus-fsys {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_fsys2: bus-fsys2 {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_fsys_apb: bus-fsys-apb {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_g2d: bus-g2d {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK333_G2D>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_g2d_acp: bus-g2d-acp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK266_G2D>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-	bus_gen: bus-gen {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK266>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_gscl_scaler: bus-gscl-scaler {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_jpeg: bus-jpeg {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_jpeg_apb: bus-jpeg-apb {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK166>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_mfc: bus-mfc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK333>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_mscl: bus-mscl {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_noc: bus-noc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK100_NOC>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_peri: bus-peri {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK66>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	bus_wcore: bus-wcore {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
-		clock-names = "bus";
-		status = "disabled";
-	};
-
-	/*
-	 * The 'cpus' node is not present here but instead it is provided
-	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
-	 */
-
-	cluster_a15_opp_table: opp-table-0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1800000000 {
-			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <1250000 1250000 1500000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1700000000 {
-			opp-hz = /bits/ 64 <1700000000>;
-			opp-microvolt = <1212500 1212500 1500000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1600000000 {
-			opp-hz = /bits/ 64 <1600000000>;
-			opp-microvolt = <1175000 1175000 1500000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1137500 1137500 1500000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1112500 1112500 1500000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1062500 1062500 1500000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1037500 1037500 1500000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1012500 1012500 1500000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = < 987500 987500 1500000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = < 962500 962500 1500000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = < 937500 937500 1500000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = < 912500 912500 1500000>;
-			clock-latency-ns = <140000>;
-		};
-	};
-
-	cluster_a7_opp_table: opp-table-1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1275000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1212500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1162500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1112500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = <1062500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1025000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = <975000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <937500>;
-			clock-latency-ns = <140000>;
-		};
-	};
-
-	soc: soc {
-		cci: cci@10d20000 {
-			compatible = "arm,cci-400";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10d20000 0x1000>;
-			ranges = <0x0 0x10d20000 0x6000>;
-
-			cci_control0: slave-if@4000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x4000 0x1000>;
-			};
-			cci_control1: slave-if@5000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x5000 0x1000>;
-			};
-		};
-
-		clock: clock-controller@10010000 {
-			compatible = "samsung,exynos5420-clock", "syscon";
-			reg = <0x10010000 0x30000>;
-			#clock-cells = <1>;
-		};
-
-		clock_audss: audss-clock-controller@3810000 {
-			compatible = "samsung,exynos5420-audss-clock";
-			reg = <0x03810000 0x0c>;
-			#clock-cells = <1>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
-				 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
-			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-			power-domains = <&mau_pd>;
-		};
-
-		mfc: codec@11000000 {
-			compatible = "samsung,mfc-v7";
-			reg = <0x11000000 0x10000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MFC>;
-			clock-names = "mfc";
-			power-domains = <&mfc_pd>;
-			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-			iommu-names = "left", "right";
-		};
-
-		mmc_0: mmc@12200000 {
-			compatible = "samsung,exynos5420-dw-mshc-smu";
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12200000 0x2000>;
-			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x40>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12210000 {
-			compatible = "samsung,exynos5420-dw-mshc-smu";
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12210000 0x2000>;
-			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x40>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12220000 {
-			compatible = "samsung,exynos5420-dw-mshc";
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12220000 0x1000>;
-			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x40>;
-			status = "disabled";
-		};
-
-		dmc: memory-controller@10c20000 {
-			compatible = "samsung,exynos5422-dmc";
-			reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
-			clocks = <&clock CLK_FOUT_SPLL>,
-				 <&clock CLK_MOUT_SCLK_SPLL>,
-				 <&clock CLK_FF_DOUT_SPLL2>,
-				 <&clock CLK_FOUT_BPLL>,
-				 <&clock CLK_MOUT_BPLL>,
-				 <&clock CLK_SCLK_BPLL>,
-				 <&clock CLK_MOUT_MX_MSPLL_CCORE>,
-				 <&clock CLK_MOUT_MCLK_CDREX>;
-			clock-names = "fout_spll",
-				      "mout_sclk_spll",
-				      "ff_dout_spll2",
-				      "fout_bpll",
-				      "mout_bpll",
-				      "sclk_bpll",
-				      "mout_mx_mspll_ccore",
-				      "mout_mclk_cdrex";
-			samsung,syscon-clk = <&clock>;
-			status = "disabled";
-		};
-
-		nocp_mem0_0: nocp@10ca1000 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10ca1000 0x200>;
-			status = "disabled";
-		};
-
-		nocp_mem0_1: nocp@10ca1400 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10ca1400 0x200>;
-			status = "disabled";
-		};
-
-		nocp_mem1_0: nocp@10ca1800 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10ca1800 0x200>;
-			status = "disabled";
-		};
-
-		nocp_mem1_1: nocp@10ca1c00 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10ca1c00 0x200>;
-			status = "disabled";
-		};
-
-		nocp_g3d_0: nocp@11a51000 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11a51000 0x200>;
-			status = "disabled";
-		};
-
-		nocp_g3d_1: nocp@11a51400 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11a51400 0x200>;
-			status = "disabled";
-		};
-
-		ppmu_dmc0_0: ppmu@10d00000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x10d00000 0x2000>;
-			clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
-			clock-names = "ppmu";
-			events {
-				ppmu_event3_dmc0_0: ppmu-event3-dmc0-0 {
-					event-name = "ppmu-event3-dmc0-0";
-				};
-			};
-		};
-
-		ppmu_dmc0_1: ppmu@10d10000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x10d10000 0x2000>;
-			clocks = <&clock CLK_PCLK_PPMU_DREX0_1>;
-			clock-names = "ppmu";
-			events {
-				ppmu_event3_dmc0_1: ppmu-event3-dmc0-1 {
-					event-name = "ppmu-event3-dmc0-1";
-				};
-			};
-		};
-
-		ppmu_dmc1_0: ppmu@10d60000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x10d60000 0x2000>;
-			clocks = <&clock CLK_PCLK_PPMU_DREX1_0>;
-			clock-names = "ppmu";
-			events {
-				ppmu_event3_dmc1_0: ppmu-event3-dmc1-0 {
-					event-name = "ppmu-event3-dmc1-0";
-				};
-			};
-		};
-
-		ppmu_dmc1_1: ppmu@10d70000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x10d70000 0x2000>;
-			clocks = <&clock CLK_PCLK_PPMU_DREX1_1>;
-			clock-names = "ppmu";
-			events {
-				ppmu_event3_dmc1_1: ppmu-event3-dmc1-1 {
-					event-name = "ppmu-event3-dmc1-1";
-				};
-			};
-		};
-
-		gsc_pd: power-domain@10044000 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044000 0x20>;
-			#power-domain-cells = <0>;
-			label = "GSC";
-		};
-
-		isp_pd: power-domain@10044020 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044020 0x20>;
-			#power-domain-cells = <0>;
-			label = "ISP";
-		};
-
-		mfc_pd: power-domain@10044060 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044060 0x20>;
-			#power-domain-cells = <0>;
-			label = "MFC";
-		};
-
-		g3d_pd: power-domain@10044080 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044080 0x20>;
-			#power-domain-cells = <0>;
-			label = "G3D";
-		};
-
-		disp_pd: power-domain@100440c0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440c0 0x20>;
-			#power-domain-cells = <0>;
-			label = "DISP";
-		};
-
-		mau_pd: power-domain@100440e0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440e0 0x20>;
-			#power-domain-cells = <0>;
-			label = "MAU";
-		};
-
-		msc_pd: power-domain@10044120 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044120 0x20>;
-			#power-domain-cells = <0>;
-			label = "MSC";
-		};
-
-		pinctrl_0: pinctrl@13400000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x13400000 0x1000>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_1: pinctrl@13410000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x13410000 0x1000>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_2: pinctrl@14000000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x14000000 0x1000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_3: pinctrl@14010000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x14010000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_4: pinctrl@3860000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x03860000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&mau_pd>;
-		};
-
-		adma: dma-controller@3880000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x03880000 0x1000>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_audss EXYNOS_ADMA>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			power-domains = <&mau_pd>;
-		};
-
-		pdma0: dma-controller@121a0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121a0000 0x1000>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		pdma1: dma-controller@121b0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121b0000 0x1000>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		mdma0: dma-controller@10800000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10800000 0x1000>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-
-		mdma1: dma-controller@11c10000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11c10000 0x1000>;
-			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			/*
-			 * MDMA1 can support both secure and non-secure
-			 * AXI transactions. When this is enabled in
-			 * the kernel for boards that run in secure
-			 * mode, we are getting imprecise external
-			 * aborts causing the kernel to oops.
-			 */
-			status = "disabled";
-		};
-
-		i2s0: i2s@3830000 {
-			compatible = "samsung,exynos5420-i2s";
-			reg = <0x03830000 0x100>;
-			dmas = <&adma 0>,
-				<&adma 2>,
-				<&adma 1>;
-			dma-names = "tx", "rx", "tx-sec";
-			clocks = <&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_SCLK_I2S>;
-			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-			#clock-cells = <1>;
-			clock-output-names = "i2s_cdclk0";
-			#sound-dai-cells = <1>;
-			samsung,idma-addr = <0x03000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s0_bus>;
-			power-domains = <&mau_pd>;
-			status = "disabled";
-		};
-
-		i2s1: i2s@12d60000 {
-			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12d60000 0x100>;
-			dmas = <&pdma1 12>,
-				<&pdma1 11>;
-			dma-names = "tx", "rx";
-			clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
-			clock-names = "iis", "i2s_opclk0";
-			#clock-cells = <1>;
-			clock-output-names = "i2s_cdclk1";
-			#sound-dai-cells = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s1_bus>;
-			status = "disabled";
-		};
-
-		i2s2: i2s@12d70000 {
-			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12d70000 0x100>;
-			dmas = <&pdma0 12>,
-				<&pdma0 11>;
-			dma-names = "tx", "rx";
-			clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
-			clock-names = "iis", "i2s_opclk0";
-			#clock-cells = <1>;
-			clock-output-names = "i2s_cdclk2";
-			#sound-dai-cells = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s2_bus>;
-			status = "disabled";
-		};
-
-		spi_0: spi@12d20000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x12d20000 0x100>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 5
-				&pdma0 4>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			status = "disabled";
-		};
-
-		spi_1: spi@12d30000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x12d30000 0x100>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma1 5
-				&pdma1 4>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			status = "disabled";
-		};
-
-		spi_2: spi@12d40000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x12d40000 0x100>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 7
-				&pdma0 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_bus>;
-			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-			clock-names = "spi", "spi_busclk0";
-			status = "disabled";
-		};
-
-		dsi: dsi@14500000 {
-			compatible = "samsung,exynos5410-mipi-dsi";
-			reg = <0x14500000 0x10000>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&mipi_phy 1>;
-			phy-names = "dsim";
-			clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
-			clock-names = "bus_clk", "pll_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		hsi2c_8: i2c@12e00000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12e00000 0x1000>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c8_hs_bus>;
-			clocks = <&clock CLK_USI4>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_9: i2c@12e10000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12e10000 0x1000>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c9_hs_bus>;
-			clocks = <&clock CLK_USI5>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_10: i2c@12e20000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12e20000 0x1000>;
-			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c10_hs_bus>;
-			clocks = <&clock CLK_USI6>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hdmi: hdmi@14530000 {
-			compatible = "samsung,exynos5420-hdmi";
-			reg = <0x14530000 0x70000>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-				 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-				 <&clock CLK_MOUT_HDMI>;
-			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-				"sclk_hdmiphy", "mout_hdmi";
-			phy = <&hdmiphy>;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-			power-domains = <&disp_pd>;
-			#sound-dai-cells = <0>;
-		};
-
-		hdmiphy: hdmi-phy@145d0000 {
-			reg = <0x145d0000 0x20>;
-		};
-
-		hdmicec: cec@101b0000 {
-			compatible = "samsung,s5p-cec";
-			reg = <0x101b0000 0x200>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_HDMI_CEC>;
-			clock-names = "hdmicec";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			hdmi-phandle = <&hdmi>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdmi_cec>;
-			status = "disabled";
-		};
-
-		mixer: mixer@14450000 {
-			compatible = "samsung,exynos5420-mixer";
-			reg = <0x14450000 0x10000>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-				 <&clock CLK_SCLK_HDMI>;
-			clock-names = "mixer", "hdmi", "sclk_hdmi";
-			power-domains = <&disp_pd>;
-			iommus = <&sysmmu_tv>;
-			status = "disabled";
-		};
-
-		rotator: rotator@11c00000 {
-			compatible = "samsung,exynos5250-rotator";
-			reg = <0x11c00000 0x64>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_ROTATOR>;
-			clock-names = "rotator";
-			iommus = <&sysmmu_rotator>;
-		};
-
-		gsc_0: video-scaler@13e00000 {
-			compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc";
-			reg = <0x13e00000 0x1000>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_GSCL0>;
-			clock-names = "gscl";
-			power-domains = <&gsc_pd>;
-			iommus = <&sysmmu_gscl0>;
-		};
-
-		gsc_1: video-scaler@13e10000 {
-			compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc";
-			reg = <0x13e10000 0x1000>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_GSCL1>;
-			clock-names = "gscl";
-			power-domains = <&gsc_pd>;
-			iommus = <&sysmmu_gscl1>;
-		};
-
-		gpu: gpu@11800000 {
-			compatible = "samsung,exynos5420-mali", "arm,mali-t628";
-			reg = <0x11800000 0x5000>;
-			interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "job", "mmu", "gpu";
-
-			clocks = <&clock CLK_G3D>;
-			clock-names = "core";
-			power-domains = <&g3d_pd>;
-			operating-points-v2 = <&gpu_opp_table>;
-
-			status = "disabled";
-			#cooling-cells = <2>;
-
-			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-177000000 {
-					opp-hz = /bits/ 64 <177000000>;
-					opp-microvolt = <812500>;
-				};
-				opp-266000000 {
-					opp-hz = /bits/ 64 <266000000>;
-					opp-microvolt = <862500>;
-				};
-				opp-350000000 {
-					opp-hz = /bits/ 64 <350000000>;
-					opp-microvolt = <912500>;
-				};
-				opp-420000000 {
-					opp-hz = /bits/ 64 <420000000>;
-					opp-microvolt = <962500>;
-				};
-				opp-480000000 {
-					opp-hz = /bits/ 64 <480000000>;
-					opp-microvolt = <1000000>;
-				};
-				opp-543000000 {
-					opp-hz = /bits/ 64 <543000000>;
-					opp-microvolt = <1037500>;
-				};
-				opp-600000000 {
-					opp-hz = /bits/ 64 <600000000>;
-					opp-microvolt = <1150000>;
-				};
-			};
-		};
-
-		scaler_0: scaler@12800000 {
-			compatible = "samsung,exynos5420-scaler";
-			reg = <0x12800000 0x1294>;
-			interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MSCL0>;
-			clock-names = "mscl";
-			power-domains = <&msc_pd>;
-			iommus = <&sysmmu_scaler0r>, <&sysmmu_scaler0w>;
-		};
-
-		scaler_1: scaler@12810000 {
-			compatible = "samsung,exynos5420-scaler";
-			reg = <0x12810000 0x1294>;
-			interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MSCL1>;
-			clock-names = "mscl";
-			power-domains = <&msc_pd>;
-			iommus = <&sysmmu_scaler1r>, <&sysmmu_scaler1w>;
-		};
-
-		scaler_2: scaler@12820000 {
-			compatible = "samsung,exynos5420-scaler";
-			reg = <0x12820000 0x1294>;
-			interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MSCL2>;
-			clock-names = "mscl";
-			power-domains = <&msc_pd>;
-			iommus = <&sysmmu_scaler2r>, <&sysmmu_scaler2w>;
-		};
-
-		jpeg_0: jpeg@11f50000 {
-			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11f50000 0x1000>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "jpeg";
-			clocks = <&clock CLK_JPEG>;
-			iommus = <&sysmmu_jpeg0>;
-		};
-
-		jpeg_1: jpeg@11f60000 {
-			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11f60000 0x1000>;
-			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "jpeg";
-			clocks = <&clock CLK_JPEG2>;
-			iommus = <&sysmmu_jpeg1>;
-		};
-
-		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5420-pmu", "simple-mfd", "syscon";
-			reg = <0x10040000 0x5000>;
-			clock-names = "clkout16";
-			clocks = <&clock CLK_FIN_PLL>;
-			#clock-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-
-			dp_phy: dp-phy {
-				compatible = "samsung,exynos5420-dp-video-phy";
-				#phy-cells = <0>;
-			};
-
-			mipi_phy: mipi-phy {
-				compatible = "samsung,exynos5420-mipi-video-phy";
-				#phy-cells = <1>;
-			};
-		};
-
-		tmu_cpu0: tmu@10060000 {
-			compatible = "samsung,exynos5420-tmu";
-			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>;
-			clock-names = "tmu_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		tmu_cpu1: tmu@10064000 {
-			compatible = "samsung,exynos5420-tmu";
-			reg = <0x10064000 0x100>;
-			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>;
-			clock-names = "tmu_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		tmu_cpu2: tmu@10068000 {
-			compatible = "samsung,exynos5420-tmu-ext-triminfo";
-			reg = <0x10068000 0x100>, <0x1006c000 0x4>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
-			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		tmu_cpu3: tmu@1006c000 {
-			compatible = "samsung,exynos5420-tmu-ext-triminfo";
-			reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
-			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
-			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		tmu_gpu: tmu@100a0000 {
-			compatible = "samsung,exynos5420-tmu-ext-triminfo";
-			reg = <0x100a0000 0x100>, <0x10068000 0x4>;
-			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
-			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		sysmmu_g2dr: sysmmu@10a60000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10a60000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <24 5>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_g2dw: sysmmu@10a70000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10a70000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <22 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_tv: sysmmu@14650000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x14650000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <7 4>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
-			power-domains = <&disp_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gscl0: sysmmu@13e80000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13e80000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-			power-domains = <&gsc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gscl1: sysmmu@13e90000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13e90000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
-			power-domains = <&gsc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler0r: sysmmu@12880000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12880000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <22 4>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-			power-domains = <&msc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler1r: sysmmu@12890000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12890000 0x1000>;
-			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-			power-domains = <&msc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler2r: sysmmu@128a0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128a0000 0x1000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-			power-domains = <&msc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler0w: sysmmu@128c0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128c0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <27 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-			power-domains = <&msc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler1w: sysmmu@128d0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128d0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <22 6>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-			power-domains = <&msc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler2w: sysmmu@128e0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128e0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <19 6>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-			power-domains = <&msc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_rotator: sysmmu@11d40000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11d40000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_jpeg0: sysmmu@11f10000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11f10000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_jpeg1: sysmmu@11f20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11f20000 0x1000>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_mfc_l: sysmmu@11200000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11200000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <6 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-			power-domains = <&mfc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_mfc_r: sysmmu@11210000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11210000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <8 5>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-			power-domains = <&mfc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimd1_0: sysmmu@14640000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x14640000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <3 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
-			power-domains = <&disp_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimd1_1: sysmmu@14680000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x14680000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <3 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
-			power-domains = <&disp_pd>;
-			#iommu-cells = <0>;
-		};
-	};
-
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0>;
-			#include "exynos5420-trip-points.dtsi"
-		};
-		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1>;
-			#include "exynos5420-trip-points.dtsi"
-		};
-		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2>;
-			#include "exynos5420-trip-points.dtsi"
-		};
-		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3>;
-			#include "exynos5420-trip-points.dtsi"
-		};
-		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu>;
-			#include "exynos5420-trip-points.dtsi"
-		};
-	};
-};
-
-&adc {
-	clocks = <&clock CLK_TSADC>;
-	clock-names = "adc";
-	samsung,syscon-phandle = <&pmu_system_controller>;
-};
-
-&dp {
-	clocks = <&clock CLK_DP1>;
-	clock-names = "dp";
-	phys = <&dp_phy>;
-	phy-names = "dp";
-	power-domains = <&disp_pd>;
-};
-
-&fimd {
-	compatible = "samsung,exynos5420-fimd";
-	clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
-	clock-names = "sclk_fimd", "fimd";
-	power-domains = <&disp_pd>;
-	iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>;
-	iommu-names = "m0", "m1";
-};
-
-&g2d {
-	iommus = <&sysmmu_g2dr>, <&sysmmu_g2dw>;
-	clocks = <&clock CLK_G2D>;
-	clock-names = "fimg2d";
-	status = "okay";
-};
-
-&i2c_0 {
-	clocks = <&clock CLK_I2C0>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_bus>;
-};
-
-&i2c_1 {
-	clocks = <&clock CLK_I2C1>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_bus>;
-};
-
-&i2c_2 {
-	clocks = <&clock CLK_I2C2>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_bus>;
-};
-
-&i2c_3 {
-	clocks = <&clock CLK_I2C3>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_bus>;
-};
-
-&hsi2c_4 {
-	clocks = <&clock CLK_USI0>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_hs_bus>;
-};
-
-&hsi2c_5 {
-	clocks = <&clock CLK_USI1>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_hs_bus>;
-};
-
-&hsi2c_6 {
-	clocks = <&clock CLK_USI2>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c6_hs_bus>;
-};
-
-&hsi2c_7 {
-	clocks = <&clock CLK_USI3>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c7_hs_bus>;
-};
-
-&mct {
-	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-	clock-names = "fin_pll", "mct";
-};
-
-&prng {
-	clocks = <&clock CLK_SSS>;
-	clock-names = "secss";
-};
-
-&pwm {
-	clocks = <&clock CLK_PWM>;
-	clock-names = "timers";
-};
-
-&rtc {
-	clocks = <&clock CLK_RTC>;
-	clock-names = "rtc";
-	interrupt-parent = <&pmu_system_controller>;
-	status = "disabled";
-};
-
-&serial_0 {
-	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma0 13>, <&pdma0 14>;
-	dma-names = "rx", "tx";
-};
-
-&serial_1 {
-	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma1 15>, <&pdma1 16>;
-	dma-names = "rx", "tx";
-};
-
-&serial_2 {
-	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma0 15>, <&pdma0 16>;
-	dma-names = "rx", "tx";
-};
-
-&serial_3 {
-	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma1 17>, <&pdma1 18>;
-	dma-names = "rx", "tx";
-};
-
-&sss {
-	clocks = <&clock CLK_SSS>;
-	clock-names = "secss";
-};
-
-&trng {
-	clocks = <&clock CLK_SSS>;
-	clock-names = "secss";
-};
-
-&usbdrd3_0 {
-	clocks = <&clock CLK_USBD300>;
-	clock-names = "usbdrd30";
-};
-
-&usbdrd_phy0 {
-	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-	clock-names = "phy", "ref";
-	samsung,pmu-syscon = <&pmu_system_controller>;
-};
-
-&usbdrd3_1 {
-	clocks = <&clock CLK_USBD301>;
-	clock-names = "usbdrd30";
-};
-
-&usbdrd_dwc3_1 {
-	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbdrd_phy1 {
-	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-	clock-names = "phy", "ref";
-	samsung,pmu-syscon = <&pmu_system_controller>;
-};
-
-&usbhost1 {
-	clocks = <&clock CLK_USBH20>;
-	clock-names = "usbhost";
-};
-
-&usbhost2 {
-	clocks = <&clock CLK_USBH20>;
-	clock-names = "usbhost";
-};
-
-&usb2_phy {
-	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-	clock-names = "phy", "ref";
-	samsung,sysreg-phandle = <&sysreg_system_controller>;
-	samsung,pmureg-phandle = <&pmu_system_controller>;
-};
-
-&watchdog {
-	clocks = <&clock CLK_WDT>;
-	clock-names = "watchdog";
-	samsung,syscon-phandle = <&pmu_system_controller>;
-};
-
-#include "exynos5420-pinctrl.dtsi"
-#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
deleted file mode 100644
index 412a0bb4b9889..0000000000000
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung Exynos5422 SoC cpu device tree source
- *
- * Copyright (c) 2015 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This file provides desired ordering for Exynos5422: CPU[0123] being the A7.
- *
- * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
- * but particular boards choose different booting order.
- *
- * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
- * booting cluster (big or LITTLE) is chosen by IROM code by reading
- * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
- * from the LITTLE: Cortex-A7.
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-				core2 {
-					cpu = <&cpu2>;
-				};
-				core3 {
-					cpu = <&cpu3>;
-				};
-			};
-
-			cluster1 {
-				core0 {
-					cpu = <&cpu4>;
-				};
-				core1 {
-					cpu = <&cpu5>;
-				};
-				core2 {
-					cpu = <&cpu6>;
-				};
-				core3 {
-					cpu = <&cpu7>;
-				};
-			};
-		};
-
-		cpu0: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clocks = <&clock CLK_KFC_CLK>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <539>;
-			dynamic-power-coefficient = <90>;
-		};
-
-		cpu1: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clocks = <&clock CLK_KFC_CLK>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <539>;
-			dynamic-power-coefficient = <90>;
-		};
-
-		cpu2: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clocks = <&clock CLK_KFC_CLK>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <539>;
-			dynamic-power-coefficient = <90>;
-		};
-
-		cpu3: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clocks = <&clock CLK_KFC_CLK>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <539>;
-			dynamic-power-coefficient = <90>;
-		};
-
-		cpu4: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <310>;
-		};
-
-		cpu5: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <310>;
-		};
-
-		cpu6: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x2>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <310>;
-		};
-
-		cpu7: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x3>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <310>;
-		};
-	};
-};
-
-&arm_a7_pmu {
-	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	status = "okay";
-};
-
-&arm_a15_pmu {
-	interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
deleted file mode 100644
index 2f5b8602e0205..0000000000000
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ /dev/null
@@ -1,1072 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU3/XU3-Lite/XU4/HC1 boards core device tree source
- *
- * Copyright (c) 2017 Marek Szyprowski
- * Copyright (c) 2013-2017 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "exynos5800.dtsi"
-#include "exynos5422-cpus.dtsi"
-
-/ {
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x7ea00000>;
-	};
-
-	aliases {
-		mmc2 = &mmc_2;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	firmware@2073000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02073000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	bus_wcore_opp_table: opp-table-2 {
-		compatible = "operating-points-v2";
-
-		/* derived from 532MHz MPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <88700000>;
-			opp-microvolt = <925000 925000 1400000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <133000000>;
-			opp-microvolt = <950000 950000 1400000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <177400000>;
-			opp-microvolt = <950000 950000 1400000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <266000000>;
-			opp-microvolt = <950000 950000 1400000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <532000000>;
-			opp-microvolt = <1000000 1000000 1400000>;
-		};
-	};
-
-	bus_noc_opp_table: opp-table-3 {
-		compatible = "operating-points-v2";
-
-		/* derived from 666MHz CPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <66600000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <74000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <83250000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <111000000>;
-		};
-	};
-
-	bus_fsys_apb_opp_table: opp-table-4 {
-		compatible = "operating-points-v2";
-
-		/* derived from 666MHz CPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <111000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <222000000>;
-		};
-	};
-
-	bus_fsys2_opp_table: opp-table-5 {
-		compatible = "operating-points-v2";
-
-		/* derived from 600MHz DPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <75000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <120000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-	};
-
-	bus_mfc_opp_table: opp-table-6 {
-		compatible = "operating-points-v2";
-
-		/* derived from 666MHz CPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <83250000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <111000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <166500000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <222000000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <333000000>;
-		};
-	};
-
-	bus_gen_opp_table: opp-table-7 {
-		compatible = "operating-points-v2";
-
-		/* derived from 532MHz MPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <88700000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <133000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <178000000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <266000000>;
-		};
-	};
-
-	bus_peri_opp_table: opp-table-8 {
-		compatible = "operating-points-v2";
-
-		/* derived from 666MHz CPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <66600000>;
-		};
-	};
-
-	bus_g2d_opp_table: opp-table-9 {
-		compatible = "operating-points-v2";
-
-		/* derived from 666MHz CPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <83250000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <111000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <166500000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <222000000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <333000000>;
-		};
-	};
-
-	bus_g2d_acp_opp_table: opp-table-10 {
-		compatible = "operating-points-v2";
-
-		/* derived from 532MHz MPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <66500000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <133000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <178000000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <266000000>;
-		};
-	};
-
-	bus_jpeg_opp_table: opp-table-11 {
-		compatible = "operating-points-v2";
-
-		/* derived from 600MHz DPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <75000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <150000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <300000000>;
-		};
-	};
-
-	bus_jpeg_apb_opp_table: opp-table-12 {
-		compatible = "operating-points-v2";
-
-		/* derived from 666MHz CPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <83250000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <111000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <133000000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <166500000>;
-		};
-	};
-
-	bus_disp1_fimd_opp_table: opp-table-13 {
-		compatible = "operating-points-v2";
-
-		/* derived from 600MHz DPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <120000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-	};
-
-	bus_disp1_opp_table: opp-table-14 {
-		compatible = "operating-points-v2";
-
-		/* derived from 600MHz DPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <120000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <300000000>;
-		};
-	};
-
-	bus_gscl_opp_table: opp-table-15 {
-		compatible = "operating-points-v2";
-
-		/* derived from 600MHz DPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <150000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <300000000>;
-		};
-	};
-
-	bus_mscl_opp_table: opp-table-16 {
-		compatible = "operating-points-v2";
-
-		/* derived from 666MHz CPLL */
-		opp00 {
-			opp-hz = /bits/ 64 <84000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <167000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <222000000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <333000000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <666000000>;
-		};
-	};
-
-	dmc_opp_table: opp-table-17 {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <165000000>;
-			opp-microvolt = <875000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <206000000>;
-			opp-microvolt = <875000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <275000000>;
-			opp-microvolt = <875000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <413000000>;
-			opp-microvolt = <887500>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <543000000>;
-			opp-microvolt = <937500>;
-		};
-		opp05 {
-			opp-hz = /bits/ 64 <633000000>;
-			opp-microvolt = <1012500>;
-		};
-		opp06 {
-			opp-hz = /bits/ 64 <728000000>;
-			opp-microvolt = <1037500>;
-		};
-		opp07 {
-			opp-hz = /bits/ 64 <825000000>;
-			opp-microvolt = <1050000>;
-		};
-	};
-
-	samsung_K3QF2F20DB: lpddr3 {
-		compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
-		density		= <16384>;
-		io-width	= <32>;
-
-		tRFC-min-tck		= <17>;
-		tRRD-min-tck		= <2>;
-		tRPab-min-tck		= <2>;
-		tRPpb-min-tck		= <2>;
-		tRCD-min-tck		= <3>;
-		tRC-min-tck		= <6>;
-		tRAS-min-tck		= <5>;
-		tWTR-min-tck		= <2>;
-		tWR-min-tck		= <7>;
-		tRTP-min-tck		= <2>;
-		tW2W-C2C-min-tck	= <0>;
-		tR2R-C2C-min-tck	= <0>;
-		tWL-min-tck		= <8>;
-		tDQSCK-min-tck		= <5>;
-		tRL-min-tck		= <14>;
-		tFAW-min-tck		= <5>;
-		tXSR-min-tck		= <12>;
-		tXP-min-tck		= <2>;
-		tCKE-min-tck		= <2>;
-		tCKESR-min-tck		= <2>;
-		tMRD-min-tck		= <5>;
-
-		timings_samsung_K3QF2F20DB_800mhz: timings {
-			compatible	= "jedec,lpddr3-timings";
-			max-freq	= <800000000>;
-			min-freq	= <100000000>;
-			tRFC		= <65000>;
-			tRRD		= <6000>;
-			tRPab		= <12000>;
-			tRPpb		= <12000>;
-			tRCD		= <10000>;
-			tRC		= <33750>;
-			tRAS		= <23000>;
-			tWTR		= <3750>;
-			tWR		= <7500>;
-			tRTP		= <3750>;
-			tW2W-C2C	= <0>;
-			tR2R-C2C	= <0>;
-			tFAW		= <25000>;
-			tXSR		= <70000>;
-			tXP		= <3750>;
-			tCKE		= <3750>;
-			tCKESR		= <3750>;
-			tMRD		= <7000>;
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo4_reg>;
-	status = "okay";
-};
-
-&bus_wcore {
-	operating-points-v2 = <&bus_wcore_opp_table>;
-	devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
-			<&nocp_mem1_0>, <&nocp_mem1_1>;
-	vdd-supply = <&buck3_reg>;
-	exynos,saturation-ratio = <100>;
-	status = "okay";
-};
-
-&bus_noc {
-	operating-points-v2 = <&bus_noc_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_fsys_apb {
-	operating-points-v2 = <&bus_fsys_apb_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_fsys2 {
-	operating-points-v2 = <&bus_fsys2_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_mfc {
-	operating-points-v2 = <&bus_mfc_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_gen {
-	operating-points-v2 = <&bus_gen_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_peri {
-	operating-points-v2 = <&bus_peri_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_g2d {
-	operating-points-v2 = <&bus_g2d_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_g2d_acp {
-	operating-points-v2 = <&bus_g2d_acp_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_jpeg {
-	operating-points-v2 = <&bus_jpeg_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_jpeg_apb {
-	operating-points-v2 = <&bus_jpeg_apb_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_disp1_fimd {
-	operating-points-v2 = <&bus_disp1_fimd_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_disp1 {
-	operating-points-v2 = <&bus_disp1_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_gscl_scaler {
-	operating-points-v2 = <&bus_gscl_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_mscl {
-	operating-points-v2 = <&bus_mscl_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu-supply = <&buck6_reg>;
-};
-
-&cpu4 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&dmc {
-	devfreq-events = <&ppmu_event3_dmc0_0>,	<&ppmu_event3_dmc0_1>,
-			<&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
-	device-handle = <&samsung_K3QF2F20DB>;
-	operating-points-v2 = <&dmc_opp_table>;
-	vdd-supply = <&buck1_reg>;
-	status = "okay";
-};
-
-&hsi2c_4 {
-	status = "okay";
-
-	pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-		samsung,s2mps11-acokb-ground;
-
-		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&s2mps11_irq>;
-		wakeup-source;
-
-		s2mps11_osc: clocks {
-			compatible = "samsung,s2mps11-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s2mps11_ap",
-					"s2mps11_cp", "s2mps11_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "vdd_ldo1";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "vdd_ldo2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "vddq_mmc0";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "vdd_adc";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "vdd_ldo5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "vdd_ldo6";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "vdd_ldo7";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "vdd_ldo8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "vdd_ldo9";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "vdd_ldo10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo12_reg: LDO12 {
-				/* Unused */
-				regulator-name = "vdd_ldo12";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2375000>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "vddq_mmc2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo14_reg: LDO14 {
-				/* Unused */
-				regulator-name = "vdd_ldo14";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "vdd_ldo15";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo16_reg: LDO16 {
-				/* Unused */
-				regulator-name = "vdd_ldo16";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "vdd_ldo17";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "vdd_emmc_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "vdd_sd";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo20_reg: LDO20 {
-				/* Unused */
-				regulator-name = "vdd_ldo20";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo21_reg: LDO21 {
-				/* Unused */
-				regulator-name = "vdd_ldo21";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo22_reg: LDO22 {
-				/* Unused */
-				regulator-name = "vdd_ldo22";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2375000>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "vdd_mifs";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo24_reg: LDO24 {
-				/* Unused */
-				regulator-name = "vdd_ldo24";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo25_reg: LDO25 {
-				/* Unused */
-				regulator-name = "vdd_ldo25";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo26_reg: LDO26 {
-				/* Used on XU3, XU3-Lite and XU4 */
-				regulator-name = "vdd_ldo26";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo27_reg: LDO27 {
-				regulator-name = "vdd_g3ds";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo28_reg: LDO28 {
-				/* Used on XU3 */
-				regulator-name = "vdd_ldo28";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo29_reg: LDO29 {
-				/* Unused */
-				regulator-name = "vdd_ldo29";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo30_reg: LDO30 {
-				/* Unused */
-				regulator-name = "vdd_ldo30";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo31_reg: LDO31 {
-				/* Unused */
-				regulator-name = "vdd_ldo31";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo32_reg: LDO32 {
-				/* Unused */
-				regulator-name = "vdd_ldo32";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo33_reg: LDO33 {
-				/* Unused */
-				regulator-name = "vdd_ldo33";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo34_reg: LDO34 {
-				/* Unused */
-				regulator-name = "vdd_ldo34";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo35_reg: LDO35 {
-				/* Unused */
-				regulator-name = "vdd_ldo35";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2375000>;
-			};
-
-			ldo36_reg: LDO36 {
-				/* Unused */
-				regulator-name = "vdd_ldo36";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo37_reg: LDO37 {
-				/* Unused */
-				regulator-name = "vdd_ldo37";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo38_reg: LDO38 {
-				/* Unused */
-				regulator-name = "vdd_ldo38";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-coupled-with = <&buck3_reg>;
-				regulator-coupled-max-spread = <300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-coupled-with = <&buck2_reg>;
-				regulator-coupled-max-spread = <300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-boot-on;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "vdd_mem";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "vdd_kfc";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "vdd_1.35v_ldo";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "vdd_2.0v_ldo";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2100000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "vdd_2.8v_ldo";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3750000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck10_reg: BUCK10 {
-				regulator-name = "vdd_vmem";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&mmc_2 {
-	status = "okay";
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <200000000>;
-	vmmc-supply = <&ldo19_reg>;
-	vqmmc-supply = <&ldo13_reg>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	sd-uhs-ddr50;
-};
-
-&nocp_mem0_0 {
-	status = "okay";
-};
-
-&nocp_mem0_1 {
-	status = "okay";
-};
-
-&nocp_mem1_0 {
-	status = "okay";
-};
-
-&nocp_mem1_1 {
-	status = "okay";
-};
-
-&pinctrl_0 {
-	s2mps11_irq: s2mps11-irq-pins {
-		samsung,pins = "gpx0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&ppmu_dmc0_0 {
-	status = "okay";
-};
-
-&ppmu_dmc0_1 {
-	status = "okay";
-};
-
-&ppmu_dmc1_0 {
-	status = "okay";
-};
-
-&ppmu_dmc1_1 {
-	status = "okay";
-};
-
-&tmu_cpu0 {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu1 {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu2 {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu3 {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_gpu {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&gpu {
-	mali-supply = <&buck4_reg>;
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "host";
-};
-
-/* usbdrd_dwc3_1 mode customized in each board */
-
-&usbdrd3_0 {
-	vdd33-supply = <&ldo9_reg>;
-	vdd10-supply = <&ldo11_reg>;
-};
-
-&usbdrd3_1 {
-	vdd33-supply = <&ldo9_reg>;
-	vdd10-supply = <&ldo11_reg>;
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
deleted file mode 100644
index 5e42803937067..0000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid HC1 board device tree source
- *
- * Copyright (c) 2017 Marek Szyprowski
- * Copyright (c) 2017 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include <dt-bindings/leds/common.h>
-#include "exynos5422-odroid-core.dtsi"
-
-/ {
-	model = "Hardkernel Odroid HC1";
-	compatible = "hardkernel,odroid-hc1", "samsung,exynos5800", \
-		     "samsung,exynos5";
-
-	led-controller {
-		compatible = "pwm-leds";
-
-		led-1 {
-			function = LED_FUNCTION_HEARTBEAT;
-			color = <LED_COLOR_ID_BLUE>;
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max-brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0>;
-			trips {
-				cpu0_alert0: cpu-alert-0 {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <10000>; /* millicelsius */
-					type = "active";
-				};
-				cpu0_alert1: cpu-alert-1 {
-					temperature = <85000>; /* millicelsius */
-					hysteresis = <10000>; /* millicelsius */
-					type = "active";
-				};
-				cpu0_crit0: cpu-crit-0 {
-					temperature = <120000>; /* millicelsius */
-					hysteresis = <0>; /* millicelsius */
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				/*
-				 * When reaching cpu0_alert0, reduce CPU
-				 * by 2 steps. On Exynos5422/5800 that would
-				 * be: 1600 MHz and 1100 MHz.
-				 */
-				map0 {
-					trip = <&cpu0_alert0>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				/*
-				 * When reaching cpu0_alert1, reduce CPU
-				 * further, down to 600 MHz (12 steps for big,
-				 * 7 steps for LITTLE).
-				 */
-				map1 {
-					trip = <&cpu0_alert1>;
-					cooling-device = <&cpu0 3 8>,
-							 <&cpu1 3 8>,
-							 <&cpu2 3 8>,
-							 <&cpu3 3 8>,
-							 <&cpu4 3 14>,
-							 <&cpu5 3 14>,
-							 <&cpu6 3 14>,
-							 <&cpu7 3 14>;
-				};
-			};
-		};
-		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1>;
-			trips {
-				cpu1_alert0: cpu-alert-0 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu1_alert1: cpu-alert-1 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu1_crit0: cpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu1_alert0>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				map1 {
-					trip = <&cpu1_alert1>;
-					cooling-device = <&cpu0 3 8>,
-							 <&cpu1 3 8>,
-							 <&cpu2 3 8>,
-							 <&cpu3 3 8>,
-							 <&cpu4 3 14>,
-							 <&cpu5 3 14>,
-							 <&cpu6 3 14>,
-							 <&cpu7 3 14>;
-				};
-			};
-		};
-		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2>;
-			trips {
-				cpu2_alert0: cpu-alert-0 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu2_alert1: cpu-alert-1 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu2_crit0: cpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu2_alert0>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				map1 {
-					trip = <&cpu2_alert1>;
-					cooling-device = <&cpu0 3 8>,
-							 <&cpu1 3 8>,
-							 <&cpu2 3 8>,
-							 <&cpu3 3 8>,
-							 <&cpu4 3 14>,
-							 <&cpu5 3 14>,
-							 <&cpu6 3 14>,
-							 <&cpu7 3 14>;
-				};
-			};
-		};
-		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3>;
-			trips {
-				cpu3_alert0: cpu-alert-0 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu3_alert1: cpu-alert-1 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu3_crit0: cpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu3_alert0>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				map1 {
-					trip = <&cpu3_alert1>;
-					cooling-device = <&cpu0 3 8>,
-							 <&cpu1 3 8>,
-							 <&cpu2 3 8>,
-							 <&cpu3 3 8>,
-							 <&cpu4 3 14>,
-							 <&cpu5 3 14>,
-							 <&cpu6 3 14>,
-							 <&cpu7 3 14>;
-				};
-			};
-		};
-		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu>;
-			trips {
-				gpu_alert0: gpu-alert-0 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				gpu_alert1: gpu-alert-1 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				gpu_crit0: gpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&gpu_alert0>;
-					cooling-device = <&gpu 0 2>;
-				};
-				map1 {
-					trip = <&gpu_alert1>;
-					cooling-device = <&gpu 3 6>;
-				};
-			};
-		};
-	};
-
-};
-
-&pwm {
-	/*
-	 * PWM 2 -- Blue LED
-	 */
-	pinctrl-0 = <&pwm2_out>;
-	pinctrl-names = "default";
-	samsung,pwm-outputs = <2>;
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
deleted file mode 100644
index 86b96f9706db0..0000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU3 audio subsystem device tree source
- *
- * Copyright (c) 2015 Krzysztof Kozlowski
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-#include <dt-bindings/sound/samsung-i2s.h>
-
-/ {
-	sound: sound {
-		compatible = "samsung,odroid-xu3-audio";
-		model = "Odroid-XU3";
-
-		samsung,audio-widgets =
-			"Headphone", "Headphone Jack",
-			"Speakers", "Speakers";
-		samsung,audio-routing =
-			"Headphone Jack", "HPL",
-			"Headphone Jack", "HPR",
-			"Headphone Jack", "MICBIAS",
-			"IN12", "Headphone Jack",
-			"Speakers", "SPKL",
-			"Speakers", "SPKR",
-			"I2S Playback", "Mixer DAI TX",
-			"HiFi Playback", "Mixer DAI TX",
-			"Mixer DAI RX", "HiFi Capture";
-
-		cpu {
-			sound-dai = <&i2s0 0>, <&i2s0 1>;
-		};
-		codec {
-			sound-dai = <&hdmi>, <&max98090>;
-		};
-	};
-};
-
-&hsi2c_5 {
-	status = "okay";
-	max98090: audio-codec@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
-		clocks = <&i2s0 CLK_I2S_CDCLK>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-	};
-};
-
-&i2s0 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_EPLL>,
-			<&clock CLK_MOUT_MAU_EPLL>,
-			<&clock CLK_MOUT_USER_MAU_EPLL>,
-			<&clock_audss EXYNOS_MOUT_AUDSS>,
-			<&clock_audss EXYNOS_MOUT_I2S>,
-			<&i2s0 CLK_I2S_RCLK_SRC>,
-			<&clock_audss EXYNOS_DOUT_SRP>,
-			<&clock_audss EXYNOS_DOUT_AUD_BUS>,
-			<&clock_audss EXYNOS_DOUT_I2S>;
-
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
-			<&clock CLK_MOUT_EPLL>,
-			<&clock CLK_MOUT_MAU_EPLL>,
-			<&clock CLK_MAU_EPLL>,
-			<&clock_audss EXYNOS_MOUT_AUDSS>,
-			<&clock_audss EXYNOS_SCLK_I2S>;
-
-	assigned-clock-rates = <0>,
-			<0>,
-			<0>,
-			<0>,
-			<0>,
-			<0>,
-			<196608001>,
-			<(196608002 / 2)>,
-			<196608000>;
-
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
deleted file mode 100644
index b4a851aa88814..0000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ /dev/null
@@ -1,510 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU3/XU3-Lite/XU4 boards common device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
- *                    Anand Moon <linux.amoon@gmail.com>
- */
-
-#include <dt-bindings/input/input.h>
-#include "exynos5422-odroid-core.dtsi"
-
-/ {
-	aliases {
-		mmc0 = &mmc_0;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key>;
-
-		power-key {
-			/*
-			 * The power button (SW2) is connected to the PWRON
-			 * pin (active high) of the S2MPS11 PMIC, which acts
-			 * as a 16ms debouce filter and signal inverter with
-			 * output on ONOB pin (active low). ONOB PMIC pin is
-			 * then connected to XEINT3 SoC pin.
-			 */
-			gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "power key";
-			debounce-interval = <0>;
-			wakeup-source;
-		};
-	};
-
-	emmc_pwrseq: pwrseq {
-		pinctrl-0 = <&emmc_nrst_pin>;
-		pinctrl-names = "default";
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
-	};
-
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm 0 20972 0>;
-		#cooling-cells = <2>;
-		cooling-levels = <0 130 170 230>;
-	};
-
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0>;
-			polling-delay-passive = <250>;
-			polling-delay = <0>;
-			trips {
-				cpu0_alert0: cpu-alert-0 {
-					temperature = <50000>; /* millicelsius */
-					hysteresis = <5000>; /* millicelsius */
-					type = "active";
-				};
-				cpu0_alert1: cpu-alert-1 {
-					temperature = <60000>; /* millicelsius */
-					hysteresis = <5000>; /* millicelsius */
-					type = "active";
-				};
-				cpu0_alert2: cpu-alert-2 {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <5000>; /* millicelsius */
-					type = "active";
-				};
-				cpu0_crit0: cpu-crit-0 {
-					temperature = <120000>; /* millicelsius */
-					hysteresis = <0>; /* millicelsius */
-					type = "critical";
-				};
-				/*
-				 * Exynos542x supports only 4 trip-points
-				 * so for these polling mode is required.
-				 * Start polling at temperature level of last
-				 * interrupt-driven trip: cpu0_alert2
-				 */
-				cpu0_alert3: cpu-alert-3 {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <10000>; /* millicelsius */
-					type = "passive";
-				};
-				cpu0_alert4: cpu-alert-4 {
-					temperature = <85000>; /* millicelsius */
-					hysteresis = <10000>; /* millicelsius */
-					type = "passive";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu0_alert0>;
-					cooling-device = <&fan0 0 1>;
-				};
-				map1 {
-					trip = <&cpu0_alert1>;
-					cooling-device = <&fan0 1 2>;
-				};
-				map2 {
-					trip = <&cpu0_alert2>;
-					cooling-device = <&fan0 2 3>;
-				};
-				/*
-				 * When reaching cpu0_alert3, reduce CPU
-				 * by 2 steps. On Exynos5422/5800 that would
-				 * (usually) be: 1800 MHz and 1200 MHz.
-				 */
-				map3 {
-					trip = <&cpu0_alert3>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				/*
-				 * When reaching cpu0_alert4, reduce CPU
-				 * further, down to 600 MHz (14 steps for big,
-				 * 8 steps for LITTLE).
-				 */
-				cpu0_cooling_map4: map4 {
-					trip = <&cpu0_alert4>;
-					cooling-device = <&cpu0 3 8>,
-							 <&cpu1 3 8>,
-							 <&cpu2 3 8>,
-							 <&cpu3 3 8>,
-							 <&cpu4 3 14>,
-							 <&cpu5 3 14>,
-							 <&cpu6 3 14>,
-							 <&cpu7 3 14>;
-				};
-			};
-		};
-		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1>;
-			polling-delay-passive = <250>;
-			polling-delay = <0>;
-			trips {
-				cpu1_alert0: cpu-alert-0 {
-					temperature = <50000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu1_alert1: cpu-alert-1 {
-					temperature = <60000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu1_alert2: cpu-alert-2 {
-					temperature = <70000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu1_crit0: cpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-				cpu1_alert3: cpu-alert-3 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-				cpu1_alert4: cpu-alert-4 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu1_alert0>;
-					cooling-device = <&fan0 0 1>;
-				};
-				map1 {
-					trip = <&cpu1_alert1>;
-					cooling-device = <&fan0 1 2>;
-				};
-				map2 {
-					trip = <&cpu1_alert2>;
-					cooling-device = <&fan0 2 3>;
-				};
-				map3 {
-					trip = <&cpu1_alert3>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				cpu1_cooling_map4: map4 {
-					trip = <&cpu1_alert4>;
-					cooling-device = <&cpu0 3 8>,
-							 <&cpu1 3 8>,
-							 <&cpu2 3 8>,
-							 <&cpu3 3 8>,
-							 <&cpu4 3 14>,
-							 <&cpu5 3 14>,
-							 <&cpu6 3 14>,
-							 <&cpu7 3 14>;
-				};
-			};
-		};
-		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2>;
-			polling-delay-passive = <250>;
-			polling-delay = <0>;
-			trips {
-				cpu2_alert0: cpu-alert-0 {
-					temperature = <50000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu2_alert1: cpu-alert-1 {
-					temperature = <60000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu2_alert2: cpu-alert-2 {
-					temperature = <70000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu2_crit0: cpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-				cpu2_alert3: cpu-alert-3 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-				cpu2_alert4: cpu-alert-4 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu2_alert0>;
-					cooling-device = <&fan0 0 1>;
-				};
-				map1 {
-					trip = <&cpu2_alert1>;
-					cooling-device = <&fan0 1 2>;
-				};
-				map2 {
-					trip = <&cpu2_alert2>;
-					cooling-device = <&fan0 2 3>;
-				};
-				map3 {
-					trip = <&cpu2_alert3>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				cpu2_cooling_map4: map4 {
-					trip = <&cpu2_alert4>;
-					cooling-device = <&cpu0 3 8>,
-							 <&cpu1 3 8>,
-							 <&cpu2 3 8>,
-							 <&cpu3 3 8>,
-							 <&cpu4 3 14>,
-							 <&cpu5 3 14>,
-							 <&cpu6 3 14>,
-							 <&cpu7 3 14>;
-				};
-			};
-		};
-		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3>;
-			polling-delay-passive = <250>;
-			polling-delay = <0>;
-			trips {
-				cpu3_alert0: cpu-alert-0 {
-					temperature = <50000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu3_alert1: cpu-alert-1 {
-					temperature = <60000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu3_alert2: cpu-alert-2 {
-					temperature = <70000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu3_crit0: cpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-				cpu3_alert3: cpu-alert-3 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-				cpu3_alert4: cpu-alert-4 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu3_alert0>;
-					cooling-device = <&fan0 0 1>;
-				};
-				map1 {
-					trip = <&cpu3_alert1>;
-					cooling-device = <&fan0 1 2>;
-				};
-				map2 {
-					trip = <&cpu3_alert2>;
-					cooling-device = <&fan0 2 3>;
-				};
-				map3 {
-					trip = <&cpu3_alert3>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				cpu3_cooling_map4: map4 {
-					trip = <&cpu3_alert4>;
-					cooling-device = <&cpu0 3 8>,
-							 <&cpu1 3 8>,
-							 <&cpu2 3 8>,
-							 <&cpu3 3 8>,
-							 <&cpu4 3 14>,
-							 <&cpu5 3 14>,
-							 <&cpu6 3 14>,
-							 <&cpu7 3 14>;
-				};
-			};
-		};
-		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu>;
-			polling-delay-passive = <250>;
-			polling-delay = <0>;
-			trips {
-				gpu_alert0: gpu-alert-0 {
-					temperature = <50000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				gpu_alert1: gpu-alert-1 {
-					temperature = <60000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				gpu_alert2: gpu-alert-2 {
-					temperature = <70000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				gpu_crit0: gpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-				gpu_alert3: gpu-alert-3 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-				gpu_alert4: gpu-alert-4 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&gpu_alert0>;
-					cooling-device = <&fan0 0 1>;
-				};
-				map1 {
-					trip = <&gpu_alert1>;
-					cooling-device = <&fan0 1 2>;
-				};
-				map2 {
-					trip = <&gpu_alert2>;
-					cooling-device = <&fan0 2 3>;
-				};
-				map3 {
-					trip = <&gpu_alert3>;
-					cooling-device = <&gpu 0 2>;
-				};
-				map4 {
-					trip = <&gpu_alert4>;
-					cooling-device = <&gpu 3 6>;
-				};
-			};
-		};
-	};
-};
-
-&buck10_reg {
-	/* Supplies vmmc-supply of mmc_0 */
-	regulator-always-on;
-	regulator-boot-on;
-};
-
-&hdmi {
-	status = "okay";
-	ddc = <&i2c_2>;
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-
-	vdd_osc-supply = <&ldo7_reg>;
-	vdd_pll-supply = <&ldo6_reg>;
-	vdd-supply = <&ldo6_reg>;
-};
-
-&hdmicec {
-	status = "okay";
-	needs-hpd;
-};
-
-&i2c_2 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	/* used by HDMI DDC */
-	status = "okay";
-};
-
-&ldo26_reg {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-always-on;
-};
-
-&mixer {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	mmc-pwrseq = <&emmc_pwrseq>;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 2>;
-	samsung,read-strobe-delay = <90>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	max-frequency = <200000000>;
-	vmmc-supply = <&ldo18_reg>;
-	vqmmc-supply = <&ldo3_reg>;
-};
-
-&pinctrl_0 {
-	power_key: power-key-pins {
-		samsung,pins = "gpx0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	emmc_nrst_pin: emmc-nrst-pins {
-		samsung,pins = "gpd1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
deleted file mode 100644
index e3154a1cae230..0000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU3-Lite board device tree source
- *
- * Copyright (c) 2015 Krzysztof Kozlowski
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5422-odroidxu3-common.dtsi"
-#include "exynos5422-odroidxu3-audio.dtsi"
-#include "exynos54xx-odroidxu-leds.dtsi"
-
-/ {
-	model = "Hardkernel Odroid XU3 Lite";
-	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
-
-	aliases {
-		ethernet = &ethernet;
-	};
-};
-
-&arm_a7_pmu {
-	status = "disabled";
-};
-
-&arm_a15_pmu {
-	status = "disabled";
-};
-
-&chipid {
-	samsung,asv-bin = <2>;
-};
-
-/*
- * Odroid XU3-Lite board uses SoC revision with lower maximum frequencies
- * than Odroid XU3/XU4 boards: 1.8 GHz for A15 cores & 1.3 GHz for A7 cores.
- * Therefore we need to update OPPs tables and thermal maps accordingly.
- */
-&cluster_a15_opp_table {
-	/delete-node/opp-2000000000;
-	/delete-node/opp-1900000000;
-};
-
-&cluster_a7_opp_table {
-	/delete-node/opp-1400000000;
-};
-
-&cpu0_cooling_map4 {
-	cooling-device = <&cpu0 3 7>,
-			 <&cpu1 3 7>,
-			 <&cpu2 3 7>,
-			 <&cpu3 3 7>,
-			 <&cpu4 3 12>,
-			 <&cpu5 3 12>,
-			 <&cpu6 3 12>,
-			 <&cpu7 3 12>;
-};
-
-&cpu1_cooling_map4 {
-	cooling-device = <&cpu0 3 7>,
-			 <&cpu1 3 7>,
-			 <&cpu2 3 7>,
-			 <&cpu3 3 7>,
-			 <&cpu4 3 12>,
-			 <&cpu5 3 12>,
-			 <&cpu6 3 12>,
-			 <&cpu7 3 12>;
-};
-
-&cpu2_cooling_map4 {
-	cooling-device = <&cpu0 3 7>,
-			 <&cpu1 3 7>,
-			 <&cpu2 3 7>,
-			 <&cpu3 3 7>,
-			 <&cpu4 3 12>,
-			 <&cpu5 3 12>,
-			 <&cpu6 3 12>,
-			 <&cpu7 3 12>;
-};
-
-&cpu3_cooling_map4 {
-	cooling-device = <&cpu0 3 7>,
-			 <&cpu1 3 7>,
-			 <&cpu2 3 7>,
-			 <&cpu3 3 7>,
-			 <&cpu4 3 12>,
-			 <&cpu5 3 12>,
-			 <&cpu6 3 12>,
-			 <&cpu7 3 12>;
-};
-
-&pwm {
-	/*
-	 * PWM 0 -- fan
-	 * PWM 1 -- Green LED
-	 * PWM 2 -- Blue LED
-	 * PWM 3 -- on MIPI connector for backlight
-	 */
-	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "peripheral";
-};
-
-&usbhost2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hub@1 {
-		compatible = "usb424,9514";
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethernet: ethernet@1 {
-			compatible = "usb424,ec00";
-			reg = <1>;
-			local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
deleted file mode 100644
index a378d4937ff73..0000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU3 board device tree source
- *
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5422-odroidxu3-common.dtsi"
-#include "exynos5422-odroidxu3-audio.dtsi"
-#include "exynos54xx-odroidxu-leds.dtsi"
-
-/ {
-	model = "Hardkernel Odroid XU3";
-	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
-
-	aliases {
-		ethernet = &ethernet;
-	};
-};
-
-&i2c_0 {
-	status = "okay";
-
-	/* A15 cluster: VDD_ARM */
-	power-sensor@40 {
-		compatible = "ti,ina231";
-		reg = <0x40>;
-		shunt-resistor = <10000>;
-	};
-
-	/* memory: VDD_MEM */
-	power-sensor@41 {
-		compatible = "ti,ina231";
-		reg = <0x41>;
-		shunt-resistor = <10000>;
-	};
-
-	/* GPU: VDD_G3D */
-	power-sensor@44 {
-		compatible = "ti,ina231";
-		reg = <0x44>;
-		shunt-resistor = <10000>;
-	};
-
-	/* A7 cluster: VDD_KFC */
-	power-sensor@45 {
-		compatible = "ti,ina231";
-		reg = <0x45>;
-		shunt-resistor = <10000>;
-	};
-};
-
-&ldo28_reg {
-	regulator-name = "dp_p3v3";
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-};
-
-&pwm {
-	/*
-	 * PWM 0 -- fan
-	 * PWM 1 -- Green LED
-	 * PWM 2 -- Blue LED
-	 * PWM 3 -- on MIPI connector for backlight
-	 */
-	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "peripheral";
-};
-
-&usbhost2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hub@1 {
-		compatible = "usb424,9514";
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethernet: ethernet@1 {
-			compatible = "usb424,ec00";
-			reg = <1>;
-			local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
deleted file mode 100644
index f5fb617f46bd1..0000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU4 board device tree source
- *
- * Copyright (c) 2015 Krzysztof Kozlowski
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/samsung-i2s.h>
-#include "exynos5422-odroidxu3-common.dtsi"
-
-/ {
-	model = "Hardkernel Odroid XU4";
-	compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \
-		     "samsung,exynos5";
-
-	led-controller {
-		compatible = "pwm-leds";
-
-		led-1 {
-			function = LED_FUNCTION_HEARTBEAT;
-			color = <LED_COLOR_ID_BLUE>;
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max-brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound: sound {
-		compatible = "samsung,odroid-xu3-audio";
-		model = "Odroid-XU4";
-
-		samsung,audio-routing = "I2S Playback", "Mixer DAI TX";
-
-		cpu {
-			sound-dai = <&i2s0 0>, <&i2s0 1>;
-		};
-
-		codec {
-			sound-dai = <&hdmi>;
-		};
-	};
-};
-
-&i2s0 {
-	status = "okay";
-
-	assigned-clocks = <&clock CLK_MOUT_EPLL>,
-			  <&clock CLK_MOUT_MAU_EPLL>,
-			  <&clock CLK_MOUT_USER_MAU_EPLL>,
-			  <&clock_audss EXYNOS_MOUT_AUDSS>,
-			  <&clock_audss EXYNOS_MOUT_I2S>,
-			  <&i2s0 CLK_I2S_RCLK_SRC>,
-			  <&clock_audss EXYNOS_DOUT_SRP>,
-			  <&clock_audss EXYNOS_DOUT_AUD_BUS>,
-			  <&clock_audss EXYNOS_DOUT_I2S>;
-
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
-				 <&clock CLK_MOUT_EPLL>,
-				 <&clock CLK_MOUT_MAU_EPLL>,
-				 <&clock CLK_MAU_EPLL>,
-				 <&clock_audss EXYNOS_MOUT_AUDSS>,
-				 <&clock_audss EXYNOS_SCLK_I2S>;
-
-	assigned-clock-rates = <0>,
-			       <0>,
-			       <0>,
-			       <0>,
-			       <0>,
-			       <0>,
-			       <196608001>,
-			       <(196608002 / 2)>,
-			       <196608000>;
-};
-
-&pwm {
-	/*
-	 * PWM 0 -- fan
-	 * PWM 2 -- Blue LED
-	 */
-	pinctrl-0 = <&pwm0_out &pwm2_out>;
-	pinctrl-names = "default";
-	samsung,pwm-outputs = <0>, <2>;
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
deleted file mode 100644
index c35261a338ff7..0000000000000
--- a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
+++ /dev/null
@@ -1,679 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung Galaxy S5 (SM-G900H) device-tree source
- *
- * Copyright (c) 2023 Markuss Broks
- */
-
-/dts-v1/;
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "exynos5800.dtsi"
-#include "exynos5422-cpus.dtsi"
-
-/ {
-	model = "Samsung Galaxy S5 (SM-G900H)";
-	compatible = "samsung,k3g", "samsung,exynos5800", \
-		     "samsung,exynos5";
-
-	chassis-type = "handset";
-
-	aliases {
-		mmc0 = &mmc_0;
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x80000000>; /* 2 GiB */
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	firmware@2073000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02073000 0x1000>;
-	};
-
-	tsp_vdd: regulator-tsp-vdd-en {
-		compatible = "regulator-fixed";
-		regulator-name = "tsp_vdd_en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpy3 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&cpu4 {
-	cpu-supply = <&buck6_reg>;
-};
-
-&gpu {
-	status = "okay";
-	mali-supply = <&buck4_reg>;
-};
-
-&hsi2c_7 {
-	status = "okay";
-
-	pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-
-		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		wakeup-source;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&s2mps11_irq>;
-
-		s2mps11_osc: clocks {
-			compatible = "samsung,s2mps11-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s2mps11_ap",
-					     "s2mps11_cp", "s2mps11_bt";
-		};
-
-		regulators {
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_MIF";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VDD_ARM";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VDD_INT";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VDD_G3D";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VDD_MEM";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "VDD_KFC";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "VIN_LLDO";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "VIN_MLDO";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2100000>;
-				regulator-always-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "VIN_HLDO";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3500000>;
-				regulator-always-on;
-			};
-
-			buck10_reg: BUCK10 {
-				regulator-name = "VDD_CAM_ISP";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3550000>;
-			};
-
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ALIVE";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_APIO";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VDD_APIO_MMC01";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VDD_ADC";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VDD_HRM_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VDD_MIPI";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VDD_MIPI_PLL_ABB1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VDD_VTF";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "VDD_UOTG";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VDDQ_PRE";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VDD_HSIC_1V0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "VDD_HSIC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VDD_APIO_MMC2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VDD_MOTOR";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VDD_CAM1_2V8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VDD_AP";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo17_reg: LDO17 {
-				/* Unused */
-				regulator-name = "VDD_LDO17";
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "VDD_CODEC";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "VDD_VMMC";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "VDD_CAM1_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "VDD_CAM_IO";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "VDD_CAM0_S_CORE";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "VDD_MIFS";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "VDD_MHL_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "VDD_LCD_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "VDD_CAM0_AF";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo27_reg: LDO27 {
-				regulator-name = "VDD_G3DS";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo28_reg: LDO28 {
-				regulator-name = "VDD_LCD_3V0";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo29_reg: LDO29 {
-				/* Unused */
-				regulator-name = "VDD_LDO29";
-			};
-
-			ldo30_reg: LDO30 {
-				regulator-name = "VDD_TOUCH";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo31_reg: LDO31 {
-				regulator-name = "VDD_COMP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo32_reg: LDO32 {
-				regulator-name = "VDD_TOUCH_IO";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo33_reg: LDO33 {
-				regulator-name = "VDD_MHL_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo34_reg: LDO34 {
-				regulator-name = "VDD_HRM_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo35_reg: LDO35 {
-				regulator-name = "VDD_SIL";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo36_reg: LDO36 {
-				/* Unused */
-				regulator-name = "VDD_LDO36";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo37_reg: LDO37 {
-				/* Unused */
-				regulator-name = "VDD_LDO37";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo38_reg: LDO38 {
-				regulator-name = "VDD_KEY_LED";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&i2c_0 {
-	status = "okay";
-
-	touchscreen@20 {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x20>;
-		interrupt-parent = <&gpx1>;
-		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-		vio-supply = <&ldo32_reg>;
-		vdd-supply = <&tsp_vdd>;
-		syna,startup-delay-ms = <100>;
-
-		pinctrl-0 = <&touch_irq>;
-		pinctrl-names = "default";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f12@12 {
-			reg = <0x12>;
-			syna,sensor-type = <1>;
-		};
-	};
-};
-
-/* eMMC flash */
-&mmc_0 {
-	status = "okay";
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	cap-mmc-highspeed;
-	non-removable;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 2>;
-	samsung,read-strobe-delay = <90>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
-	bus-width = <8>;
-};
-
-&pinctrl_0 {
-	s2mps11_irq: s2mps11-irq-pins {
-		samsung,pins = "gpx0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	touch_irq: touch-irq-pins {
-		samsung,pins = "gpx1-6";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&timer {
-	arm,cpu-registers-not-fw-configured;
-};
-
-&tmu_cpu0 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu1 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu2 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu3 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_gpu {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "peripheral";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "peripheral";
-};
-
-&usbdrd3_0 {
-	vdd33-supply = <&ldo9_reg>;
-	vdd10-supply = <&ldo11_reg>;
-};
-
-&usbdrd3_1 {
-	vdd33-supply = <&ldo9_reg>;
-	vdd10-supply = <&ldo11_reg>;
-};
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
deleted file mode 100644
index 8c0e1716c0b38..0000000000000
--- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU/XU3 LED device tree source
- *
- * Copyright (c) 2015,2016 Krzysztof Kozlowski
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	led-controller-1 {
-		compatible = "pwm-leds";
-
-		led-1 {
-			label = "green:mmc0";
-			function = LED_FUNCTION_DISK_ACTIVITY;
-			color = <LED_COLOR_ID_GREEN>;
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max-brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		led-2 {
-			function = LED_FUNCTION_HEARTBEAT;
-			color = <LED_COLOR_ID_BLUE>;
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max-brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	led-controller-2 {
-		compatible = "gpio-leds";
-
-		led-3 {
-			label = "red:microSD";
-			function = LED_FUNCTION_DISK_ACTIVITY;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
deleted file mode 100644
index 5c799886c2756..0000000000000
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos54xx SoC series common device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2016 Krzysztof Kozlowski
- *
- * Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific
- * Exynos 54xx SoCs should include this file and customize it further
- * (e.g. with clocks).
- */
-
-#include "exynos5.dtsi"
-
-/ {
-	compatible = "samsung,exynos5";
-
-	aliases {
-		i2c4 = &hsi2c_4;
-		i2c5 = &hsi2c_5;
-		i2c6 = &hsi2c_6;
-		i2c7 = &hsi2c_7;
-		usbdrdphy0 = &usbdrd_phy0;
-		usbdrdphy1 = &usbdrd_phy1;
-	};
-
-	arm_a7_pmu: arm-a7-pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	arm_a15_pmu: arm-a15-pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <1 2>,
-			     <7 0>,
-			     <16 6>,
-			     <19 2>;
-		status = "disabled";
-	};
-
-	timer: timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <24000000>;
-	};
-
-	soc: soc {
-		sram@2020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x54000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x54000>;
-
-			smp-sram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sram@53000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x53000 0x1000>;
-			};
-		};
-
-		mct: timer@101c0000 {
-			compatible = "samsung,exynos5420-mct",
-				     "samsung,exynos4210-mct";
-			reg = <0x101c0000 0xb00>;
-			interrupts-extended = <&combiner 23 3>,
-					      <&combiner 23 4>,
-					      <&combiner 25 2>,
-					      <&combiner 25 3>,
-					      <&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-					      <&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-					      <&gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-					      <&gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-					      <&gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-					      <&gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-					      <&gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					      <&gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		watchdog: watchdog@101d0000 {
-			compatible = "samsung,exynos5420-wdt";
-			reg = <0x101d0000 0x100>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		adc: adc@12d10000 {
-			compatible = "samsung,exynos-adc-v2";
-			reg = <0x12d10000 0x100>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			#io-channel-cells = <1>;
-			status = "disabled";
-		};
-
-		/* i2c_0-3 are defined in exynos5.dtsi */
-		hsi2c_4: i2c@12ca0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12ca0000 0x1000>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		hsi2c_5: i2c@12cb0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12cb0000 0x1000>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		hsi2c_6: i2c@12cc0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12cc0000 0x1000>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		hsi2c_7: i2c@12cd0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12cd0000 0x1000>;
-			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usbdrd3_0: usb@12000000 {
-			compatible = "samsung,exynos5250-dwusb3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x12000000 0x10000>;
-
-			usbdrd_dwc3_0: usb@0 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x10000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		usbdrd_phy0: phy@12100000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12100000 0x100>;
-			#phy-cells = <1>;
-		};
-
-		usbdrd3_1: usb@12400000 {
-			compatible = "samsung,exynos5250-dwusb3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x12400000 0x10000>;
-
-			usbdrd_dwc3_1: usb@0 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x10000>;
-				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		usbdrd_phy1: phy@12500000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12500000 0x100>;
-			#phy-cells = <1>;
-		};
-
-		usbhost2: usb@12110000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0x12110000 0x100>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb2_phy 0>;
-			phy-names = "host";
-		};
-
-		usbhost1: usb@12120000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0x12120000 0x100>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb2_phy 0>;
-			phy-names = "host";
-		};
-
-		usb2_phy: phy@12130000 {
-			compatible = "samsung,exynos5420-usb2-phy";
-			reg = <0x12130000 0x100>;
-			#phy-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
deleted file mode 100644
index 1f544f12da6c5..0000000000000
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ /dev/null
@@ -1,1108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Google Peach Pi Rev 10+ board device tree source
- *
- * Copyright (c) 2014 Google, Inc
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/maxim,max77802.h>
-#include <dt-bindings/regulator/maxim,max77802.h>
-#include <dt-bindings/sound/samsung-i2s.h>
-#include "exynos5800.dtsi"
-#include "exynos5420-cpus.dtsi"
-
-/ {
-	model = "Google Peach Pi Rev 10+";
-
-	compatible = "google,pi-rev16",
-		"google,pi-rev15", "google,pi-rev14",
-		"google,pi-rev13", "google,pi-rev12",
-		"google,pi-rev11", "google,pi-rev10",
-		"google,pi", "google,peach", "samsung,exynos5800",
-		"samsung,exynos5";
-	chassis-type = "laptop";
-
-	aliases {
-		/* Assign 20 so we don't get confused w/ builtin ones */
-		i2c20 = &i2c_tunnel;
-		mmc0 = &mmc_0; /* eMMC */
-		mmc1 = &mmc_2; /* SD */
-		mmc2 = &mmc_1; /* WiFi */
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
-		power-supply = <&tps65090_fet1>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-	};
-
-	chosen {
-		stdout-path = "serial3:115200n8";
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq &lid_irq>;
-
-		power-key {
-			label = "Power";
-			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		lid-switch {
-			label = "Lid";
-			gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0>; /* SW_LID */
-			debounce-interval = <1>;
-			wakeup-source;
-		};
-
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x80000000>;
-	};
-
-	sound {
-		compatible = "google,snow-audio-max98091";
-
-		samsung,model = "Peach-Pi-I2S-MAX98091";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&max98091>;
-
-		cpu {
-			sound-dai = <&i2s0 0>;
-		};
-
-		codec {
-			sound-dai = <&max98091>, <&hdmi>;
-		};
-	};
-
-	usb300_vbus_reg: regulator-usb300 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb300_vbus_en>;
-		enable-active-high;
-	};
-
-	usb301_vbus_reg: regulator-usb301 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb301_vbus_en>;
-		enable-active-high;
-	};
-
-	vbat: fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat-supply";
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	panel: panel {
-		compatible = "auo,b133htn01";
-		power-supply = <&tps65090_fet6>;
-		backlight = <&backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dp_out>;
-			};
-		};
-	};
-
-	mmc1_pwrseq: mmc1-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
-		clocks = <&max77802 MAX77802_CLK_32K_CP>;
-		clock-names = "ext_clock";
-	};
-};
-
-&adc {
-	status = "okay";
-	vdd-supply = <&ldo9_reg>;
-};
-
-&clock_audss {
-	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
-};
-
-/*
- * Peach Pi board uses SoC revision with lower maximum frequency for A7 cores
- * (1.3 GHz instead of 1.4 GHz) than Odroid XU3/XU4 boards.  Thus we need to
- * update A7 OPPs table accordingly.
- */
-&cluster_a7_opp_table {
-	/delete-node/opp-1400000000;
-};
-
-&cpu0 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&cpu4 {
-	cpu-supply = <&buck6_reg>;
-};
-
-&dp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd_gpio>;
-	samsung,color-space = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-
-	ports {
-		port {
-			dp_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
-};
-
-&hdmi {
-	status = "okay";
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	ddc = <&i2c_2>;
-
-	hdmi-en-supply = <&tps65090_fet7>;
-	vdd-supply = <&ldo8_reg>;
-	vdd_osc-supply = <&ldo10_reg>;
-	vdd_pll-supply = <&ldo8_reg>;
-};
-
-&hsi2c_4 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	max77802: pmic@9 {
-		compatible = "maxim,max77802";
-		interrupt-parent = <&gpx3>;
-		interrupts = <1 IRQ_TYPE_NONE>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
-			    <&pmic_dvs_1>, <&pmic_dvs_2>;
-		wakeup-source;
-		reg = <0x9>;
-		#clock-cells = <1>;
-
-		inb1-supply = <&tps65090_dcdc2>;
-		inb2-supply = <&tps65090_dcdc1>;
-		inb3-supply = <&tps65090_dcdc2>;
-		inb4-supply = <&tps65090_dcdc2>;
-		inb5-supply = <&tps65090_dcdc1>;
-		inb6-supply = <&tps65090_dcdc2>;
-		inb7-supply = <&tps65090_dcdc1>;
-		inb8-supply = <&tps65090_dcdc1>;
-		inb9-supply = <&tps65090_dcdc1>;
-		inb10-supply = <&tps65090_dcdc1>;
-
-		inl1-supply = <&buck5_reg>;
-		inl2-supply = <&buck7_reg>;
-		inl3-supply = <&buck9_reg>;
-		inl4-supply = <&buck9_reg>;
-		inl5-supply = <&buck9_reg>;
-		inl6-supply = <&tps65090_dcdc2>;
-		inl7-supply = <&buck9_reg>;
-		inl9-supply = <&tps65090_dcdc2>;
-		inl10-supply = <&buck7_reg>;
-
-		regulators {
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <12500>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <12500>;
-				regulator-coupled-with = <&buck3_reg>;
-				regulator-coupled-max-spread = <300000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <12500>;
-				regulator-coupled-with = <&buck2_reg>;
-				regulator-coupled-max-spread = <300000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <12500>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "vdd_1v2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "vdd_kfc";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <12500>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "vdd_1v35";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "vdd_emmc";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "vdd_2v";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			buck10_reg: BUCK10 {
-				regulator-name = "vdd_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo1_reg: LDO1 {
-				regulator-name = "vdd_1v0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-mode = <MAX77802_OPMODE_LP>;
-				};
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "vdd_1v2_2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "vdd_1v8_3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-mode = <MAX77802_OPMODE_LP>;
-				};
-			};
-
-			vqmmc_sdcard: ldo4_reg: LDO4 {
-				regulator-name = "vdd_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "vdd_1v8_5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "vdd_1v8_6";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "vdd_1v8_7";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "vdd_ldo8";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "vdd_ldo9";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-mode = <MAX77802_OPMODE_LP>;
-				};
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "vdd_ldo10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-mode = <MAX77802_OPMODE_LP>;
-				};
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "vdd_ldo12";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "vdd_ldo13";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-mode = <MAX77802_OPMODE_LP>;
-				};
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "vdd_ldo14";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "vdd_ldo15";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "vdd_g3ds";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "ldo_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "ldo_19";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "ldo_20";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "ldo_21";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "ldo_23";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-			ldo24_reg: LDO24 {
-				regulator-name = "ldo_24";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "ldo_25";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "ldo_26";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo27_reg: LDO27 {
-				regulator-name = "ldo_27";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo28_reg: LDO28 {
-				regulator-name = "ldo_28";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo29_reg: LDO29 {
-				regulator-name = "ldo_29";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo30_reg: LDO30 {
-				regulator-name = "vdd_mifs";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo32_reg: LDO32 {
-				regulator-name = "ldo_32";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo33_reg: LDO33 {
-				regulator-name = "ldo_33";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo34_reg: LDO34 {
-				regulator-name = "ldo_34";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo35_reg: LDO35 {
-				regulator-name = "ldo_35";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-		};
-	};
-};
-
-&hsi2c_7 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	max98091: codec@10 {
-		compatible = "maxim,max98091";
-		reg = <0x10>;
-		interrupts = <2 IRQ_TYPE_NONE>;
-		interrupt-parent = <&gpx0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max98091_irq>;
-		clocks = <&pmu_system_controller 0>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-	};
-
-	light-sensor@44 {
-		compatible = "isil,isl29018";
-		reg = <0x44>;
-		vcc-supply = <&tps65090_fet5>;
-	};
-};
-
-&hsi2c_8 {
-	status = "okay";
-	clock-frequency = <333000>;
-	/* Atmel mXT540S */
-	trackpad@4b {
-		compatible = "atmel,maxtouch";
-		reg = <0x4b>;
-		interrupt-parent = <&gpx1>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-		pinctrl-names = "default";
-		pinctrl-0 = <&trackpad_irq>;
-		linux,gpio-keymap = <KEY_RESERVED
-				     KEY_RESERVED
-				     KEY_RESERVED	/* GPIO 0 */
-				     KEY_RESERVED	/* GPIO 1 */
-				     BTN_LEFT		/* GPIO 2 */
-				     KEY_RESERVED>;	/* GPIO 3 */
-	};
-};
-
-&hsi2c_9 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-
-		/* Unused irq; but still need to configure the pins */
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpm_irq>;
-	};
-};
-
-&i2c_2 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	samsung,i2c-slave-addr = <0x50>;
-};
-
-&i2s0 {
-	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
-	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
-	status = "okay";
-};
-
-&mixer {
-	status = "okay";
-};
-
-/* eMMC flash */
-&mmc_0 {
-	status = "okay";
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	cap-mmc-highspeed;
-	non-removable;
-	clock-frequency = <800000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 2>;
-	samsung,read-strobe-delay = <90>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
-	bus-width = <8>;
-};
-
-/* WiFi SDIO module */
-&mmc_1 {
-	status = "okay";
-	non-removable;
-	cap-sdio-irq;
-	keep-power-in-suspend;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <1>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
-		    <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	mmc-pwrseq = <&mmc1_pwrseq>;
-	vqmmc-supply = <&buck10_reg>;
-};
-
-/* uSD card */
-&mmc_2 {
-	status = "okay";
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-};
-
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mask_tpm_reset>;
-
-	wifi_en: wifi-en-pins {
-		samsung,pins = "gpx0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	max98091_irq: max98091-irq-pins {
-		samsung,pins = "gpx0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset-pins {
-		samsung,pins = "gpx0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-		samsung,pin-val = <0>;
-	};
-
-	tpm_irq: tpm-irq-pins {
-		samsung,pins = "gpx1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	trackpad_irq: trackpad-irq-pins {
-		samsung,pins = "gpx1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	power_key_irq: power-key-irq-pins {
-		samsung,pins = "gpx1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	ec_irq: ec-irq-pins {
-		samsung,pins = "gpx1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	tps65090_irq: tps65090-irq-pins {
-		samsung,pins = "gpx2-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	dp_hpd_gpio: dp-hpd-gpio-pins {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	max77802_irq: max77802-irq-pins {
-		samsung,pins = "gpx3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	lid_irq: lid-irq-pins {
-		samsung,pins = "gpx3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pmic_dvs_1: pmic-dvs-1-pins {
-		samsung,pins = "gpy7-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-/* pinctrl_1 */
-/* Adjust WiFi drive strengths lower for EMI */
-&sd1_bus1 {
-	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-};
-
-&sd1_bus4 {
-	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-};
-
-&sd1_bus8 {
-	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-};
-
-&sd1_clk {
-	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-};
-
-&sd1_cmd {
-	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-};
-
-&pinctrl_2 {
-	pmic_dvs_2: pmic-dvs-2-pins {
-		samsung,pins = "gpj4-2", "gpj4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-/* pinctrl_3*/
-/* Drive SPI lines at x2 for better integrity */
-&spi2_bus {
-	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-};
-
-&pinctrl_3 {
-	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs-pins {
-		samsung,pins = "gpb1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
-
-	usb300_vbus_en: usb300-vbus-en-pins {
-		samsung,pins = "gph0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	usb301_vbus_en: usb301-vbus-en-pins {
-		samsung,pins = "gph0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pmic_selb: pmic-selb-pins {
-		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
-			       "gph0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&pmu_system_controller {
-	assigned-clocks = <&pmu_system_controller 0>;
-	assigned-clock-parents = <&clock CLK_FIN_PLL>;
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&spi_2 {
-	status = "okay";
-	num-cs = <1>;
-	samsung,spi-src-clk = <0>;
-	cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
-
-	cros_ec: cros-ec@0 {
-		compatible = "google,cros-ec-spi";
-		interrupt-parent = <&gpx1>;
-		interrupts = <5 IRQ_TYPE_NONE>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ec_spi_cs &ec_irq>;
-		reg = <0>;
-		spi-max-frequency = <3125000>;
-		google,has-vbc-nvram;
-
-		controller-data {
-			samsung,spi-feedback-delay = <1>;
-		};
-
-		i2c_tunnel: i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			google,remote-bus = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-				sbs,i2c-retry-count = <2>;
-			};
-
-			power-regulator@48 {
-				compatible = "ti,tps65090";
-				reg = <0x48>;
-
-				/*
-				 * Config irq to disable internal pulls
-				 * even though we run in polling mode.
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&tps65090_irq>;
-
-				vsys1-supply = <&vbat>;
-				vsys2-supply = <&vbat>;
-				vsys3-supply = <&vbat>;
-				infet1-supply = <&vbat>;
-				infet2-supply = <&tps65090_dcdc1>;
-				infet3-supply = <&tps65090_dcdc2>;
-				infet4-supply = <&tps65090_dcdc2>;
-				infet5-supply = <&tps65090_dcdc2>;
-				infet6-supply = <&tps65090_dcdc2>;
-				infet7-supply = <&tps65090_dcdc1>;
-				vsys-l1-supply = <&vbat>;
-				vsys-l2-supply = <&vbat>;
-
-				regulators {
-					tps65090_dcdc1: dcdc1 {
-						ti,enable-ext-control;
-					};
-					tps65090_dcdc2: dcdc2 {
-						ti,enable-ext-control;
-					};
-					tps65090_dcdc3: dcdc3 {
-						ti,enable-ext-control;
-					};
-					tps65090_fet1: fet1 {
-						regulator-name = "vcd_led";
-					};
-					tps65090_fet2: fet2 {
-						regulator-name = "video_mid";
-						regulator-always-on;
-					};
-					tps65090_fet3: fet3 {
-						regulator-name = "wwan_r";
-						regulator-always-on;
-					};
-					tps65090_fet4: fet4 {
-						regulator-name = "sdcard";
-						regulator-always-on;
-					};
-					tps65090_fet5: fet5 {
-						regulator-name = "camout";
-						regulator-always-on;
-					};
-					tps65090_fet6: fet6 {
-						regulator-name = "lcd_vdd";
-					};
-					tps65090_fet7: fet7 {
-						regulator-name = "video_mid_1a";
-						regulator-always-on;
-					};
-					tps65090_ldo1: ldo1 {
-					};
-					tps65090_ldo2: ldo2 {
-					};
-				};
-
-				charger {
-					compatible = "ti,tps65090-charger";
-				};
-			};
-		};
-	};
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&timer {
-	arm,cpu-registers-not-fw-configured;
-};
-
-&tmu_cpu0 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu1 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu2 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_cpu3 {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&tmu_gpu {
-	vtmu-supply = <&ldo10_reg>;
-};
-
-&usbdrd3_0 {
-	vdd10-supply = <&ldo15_reg>;
-	vdd33-supply = <&ldo12_reg>;
-};
-
-&usbdrd3_1 {
-	vdd10-supply = <&ldo15_reg>;
-	vdd33-supply = <&ldo12_reg>;
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "host";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-};
-
-&usbdrd_phy0 {
-	vbus-supply = <&usb300_vbus_reg>;
-};
-
-&usbdrd_phy1 {
-	vbus-supply = <&usb301_vbus_reg>;
-};
-
-/*
- * Use longest HW watchdog in SoC (32 seconds) since the hardware
- * watchdog provides no debugging information (compared to soft/hard
- * lockup detectors) and so should be last resort.
- */
-&watchdog {
-	timeout-sec = <32>;
-};
-
-#include "cros-ec-keyboard.dtsi"
-#include "cros-adc-thermistors.dtsi"
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
deleted file mode 100644
index 8328ddb3b02f9..0000000000000
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung Exynos5800 SoC device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung Exynos5800 SoC device nodes are listed in this file.
- * Exynos5800 based board files can include this file and provide
- * values for board specfic bindings.
- */
-
-#include "exynos5420.dtsi"
-
-/ {
-	compatible = "samsung,exynos5800", "samsung,exynos5";
-};
-
-&clock {
-	compatible = "samsung,exynos5800-clock", "syscon";
-};
-
-&cluster_a15_opp_table {
-	opp-2000000000 {
-		opp-hz = /bits/ 64 <2000000000>;
-		opp-microvolt = <1312500 1312500 1500000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-1900000000 {
-		opp-hz = /bits/ 64 <1900000000>;
-		opp-microvolt = <1262500 1262500 1500000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-1800000000 {
-		opp-hz = /bits/ 64 <1800000000>;
-		opp-microvolt = <1237500 1237500 1500000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-1700000000 {
-		opp-microvolt = <1250000 1250000 1500000>;
-	};
-	opp-1600000000 {
-		opp-microvolt = <1250000 1250000 1500000>;
-	};
-	opp-1500000000 {
-		opp-microvolt = <1100000 1100000 1500000>;
-	};
-	opp-1400000000 {
-		opp-microvolt = <1100000 1100000 1500000>;
-	};
-	opp-1300000000 {
-		opp-microvolt = <1100000 1100000 1500000>;
-	};
-	opp-1200000000 {
-		opp-microvolt = <1000000 1000000 1500000>;
-	};
-	opp-1100000000 {
-		opp-microvolt = <1000000 1000000 1500000>;
-	};
-	opp-1000000000 {
-		opp-microvolt = <1000000 1000000 1500000>;
-	};
-	opp-900000000 {
-		opp-microvolt = <1000000 1000000 1500000>;
-	};
-	opp-800000000 {
-		opp-microvolt = <900000 900000 1500000>;
-	};
-	opp-700000000 {
-		opp-microvolt = <900000 900000 1500000>;
-	};
-	opp-600000000 {
-		opp-hz = /bits/ 64 <600000000>;
-		opp-microvolt = <900000 900000 1500000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-500000000 {
-		opp-hz = /bits/ 64 <500000000>;
-		opp-microvolt = <900000 900000 1500000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-400000000 {
-		opp-hz = /bits/ 64 <400000000>;
-		opp-microvolt = <900000 900000 1500000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-300000000 {
-		opp-hz = /bits/ 64 <300000000>;
-		opp-microvolt = <900000 900000 1500000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-200000000 {
-		opp-hz = /bits/ 64 <200000000>;
-		opp-microvolt = <900000 900000 1500000>;
-		clock-latency-ns = <140000>;
-	};
-};
-
-&cluster_a7_opp_table {
-	opp-1400000000 {
-		opp-hz = /bits/ 64 <1400000000>;
-		opp-microvolt = <1275000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-1300000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1200000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1100000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1000000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-900000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-800000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-700000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-600000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-500000000 {
-		opp-hz = /bits/ 64 <500000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-400000000 {
-		opp-hz = /bits/ 64 <400000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-300000000 {
-		opp-hz = /bits/ 64 <300000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-200000000 {
-		opp-hz = /bits/ 64 <200000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-};
-
-&dsi {
-	compatible = "samsung,exynos5422-mipi-dsi";
-};
-
-&mfc {
-	compatible = "samsung,mfc-v8";
-};
-
-&soc {
-	cam_pd: power-domain@10045100 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10045100 0x20>;
-		#power-domain-cells = <0>;
-		label = "CAM";
-	};
-};
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi b/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi
deleted file mode 100644
index 7f3652dea550b..0000000000000
--- a/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2020 Facebook Inc.
-
-partitions {
-	compatible = "fixed-partitions";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	/*
-	 * u-boot partition: 896KB.
-	 */
-	u-boot@0 {
-		reg = <0x0 0xe0000>;
-		label = "u-boot";
-	};
-
-	/*
-	 * u-boot environment variables: 64KB.
-	 */
-	u-boot-env@e0000 {
-		reg = <0xe0000 0x10000>;
-		label = "env";
-	};
-
-	/*
-	 * image metadata partition (64KB), used by Facebook internal
-	 * tools.
-	 */
-	image-meta@f0000 {
-		reg = <0xf0000 0x10000>;
-		label = "meta";
-	};
-
-	/*
-	 * FIT image: 119 MB.
-	 */
-	fit@100000 {
-		reg = <0x100000 0x7700000>;
-		label = "fit";
-	};
-
-	/*
-	 * "data0" partition (8MB) is used by Facebook BMC platforms as
-	 * persistent data store.
-	 */
-	data0@7800000 {
-		reg = <0x7800000 0x800000>;
-		label = "data0";
-	};
-
-	/*
-	 * Although the master partition can be created by enabling
-	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
-	 * explicitly created to avoid breaking legacy applications.
-	 */
-	flash0@0 {
-		reg = <0x0 0x8000000>;
-		label = "flash0";
-	};
-};
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi b/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi
deleted file mode 100644
index 87bb8b5762500..0000000000000
--- a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Facebook Inc.
-
-partitions {
-	compatible = "fixed-partitions";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	u-boot@0 {
-		reg = <0x0 0x60000>;
-		label = "u-boot";
-	};
-
-	u-boot-env@60000 {
-		reg = <0x60000 0x20000>;
-		label = "env";
-	};
-
-	fit@80000 {
-		reg = <0x80000 0x1b80000>;
-		label = "fit";
-	};
-
-	/*
-	 * "data0" partition is used by several Facebook BMC platforms
-	 * as persistent data store.
-	 */
-	data0@1c00000 {
-		reg = <0x1c00000 0x400000>;
-		label = "data0";
-	};
-
-	/*
-	 * Although the master partition can be created by enabling
-	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
-	 * explicitly created to avoid breaking legacy applications.
-	 */
-	flash0@0 {
-		reg = <0x0 0x2000000>;
-		label = "flash0";
-	};
-};
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
deleted file mode 100644
index dbba33e5a06ce..0000000000000
--- a/arch/arm/boot/dts/ge863-pro3.dtsi
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3
- *
- * Copyright (C) 2012 Telit,
- *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
- */
-
-#include "at91sam9260.dtsi"
-
-/ {
-	clocks {
-		main_xtal {
-			clock-frequency = <6000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						boot@0 {
-							label = "boot";
-							reg = <0x0 0x7c0000>;
-						};
-
-						root@7c0000 {
-							label = "root";
-							reg = <0x7c0000 0x7840000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
deleted file mode 100644
index 396149664297f..0000000000000
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ /dev/null
@@ -1,492 +0,0 @@
-/*
- * Device Tree file for D-Link DIR-685 Xtreme N Storage Router
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "D-Link DIR-685 Xtreme N Storage Router";
-	compatible = "dlink,dir-685", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 128 MB SDRAM in 2 x Hynix HY5DU121622DTP-D43 */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
-		stdout-path = "uart0:19200n8";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-esc {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_ESC>;
-			label = "reset";
-			/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
-			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-		};
-		button-eject {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_EJECTCD>;
-			label = "unmount";
-			/* Collides with LPC LFRAME, UART RTS, SSP TXD */
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	vdisp: regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "display-power";
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-		/* Collides with LCD E */
-		gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Collides with IDE pins, that's cool (we do not use them) */
-		sck-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-
-		panel: display@0 {
-			compatible = "dlink,dir-685-panel", "ilitek,ili9322";
-			reg = <0>;
-			/* 50 ns min period = 20 MHz */
-			spi-max-frequency = <20000000>;
-			vcc-supply = <&vdisp>;
-			iovcc-supply = <&vdisp>;
-			vci-supply = <&vdisp>;
-
-			port {
-				panel_in: endpoint {
-					remote-endpoint = <&display_out>;
-				};
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-wps {
-			label = "dir685:blue:WPS";
-			/* Collides with ICE */
-			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		/*
-		 * These two LEDs are on the side of the device.
-		 * For electrical reasons, both LEDs cannot be active
-		 * at the same time so only blue or orange can be on at
-		 * one time. Enabling both makes the LED go dark.
-		 * The LEDs both sit inside the unmount button and the
-		 * label on the case says "unmount".
-		 */
-		led-blue-hd {
-			label = "dir685:blue:HD";
-			/* Collides with LPC_SERIRQ, UART DTR, SSP FSC pins */
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "disk-read";
-		};
-		led-orange-hd {
-			label = "dir685:orange:HD";
-			/* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "disk-write";
-		};
-	};
-
-	/*
-	 * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
-	 * sensor. It is turned on when the temperature exceeds 46 degrees
-	 * and turned off when the temperatures goes below 41 degrees
-	 * (celsius).
-	 */
-	fan0: gpio-fan {
-		compatible = "gpio-fan";
-		/* Collides with IDE */
-		gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0 0>, <10000 1>;
-		#cooling-cells = <2>;
-	};
-
-	thermal-zones {
-		chassis-thermal {
-			/* Poll every 20 seconds */
-			polling-delay = <20000>;
-			/* Poll every 2nd second when cooling */
-			polling-delay-passive = <2000>;
-			/*  Use the thermal sensor in the hard drive */
-			thermal-sensors = <&drive0>;
-
-			/* Tripping points from the fan.script in the rootfs */
-			trips {
-				alert: chassis-alert {
-					/* At 43 degrees turn on the fan */
-					temperature = <43000>;
-					hysteresis = <3000>;
-					type = "active";
-				};
-				crit: chassis-crit {
-					/* Just shut down at 60 degrees */
-					temperature = <60000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&alert>;
-					cooling-device = <&fan0 1 1>;
-				};
-			};
-		};
-	};
-
-	/*
-	 * The touchpad input is connected to a GPIO bit-banged
-	 * I2C bus.
-	 */
-	i2c {
-		compatible = "i2c-gpio";
-		/* Collides with ICE */
-		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		touchkeys@26 {
-			compatible = "dlink,dir685-touchkeys";
-			reg = <0x26>;
-			interrupt-parent = <&gpio0>;
-			/* Collides with NAND flash */
-			interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
-		};
-	};
-
-	/* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */
-	switch {
-		compatible = "realtek,rtl8366rb";
-		/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
-		mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-		mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-		realtek,disable-leds;
-
-		switch_intc: interrupt-controller {
-			/* GPIO 15 provides the interrupt */
-			interrupt-parent = <&gpio0>;
-			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan0";
-				phy-handle = <&phy0>;
-			};
-			port@1 {
-				reg = <1>;
-				label = "lan1";
-				phy-handle = <&phy1>;
-			};
-			port@2 {
-				reg = <2>;
-				label = "lan2";
-				phy-handle = <&phy2>;
-			};
-			port@3 {
-				reg = <3>;
-				label = "lan3";
-				phy-handle = <&phy3>;
-			};
-			port@4 {
-				reg = <4>;
-				label = "wan";
-				phy-handle = <&phy4>;
-			};
-			rtl8366rb_cpu_port: port@5 {
-				reg = <5>;
-				label = "cpu";
-				ethernet = <&gmac0>;
-				phy-mode = "rgmii";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-					pause;
-				};
-			};
-
-		};
-
-		mdio {
-			compatible = "realtek,smi-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy0: phy@0 {
-				reg = <0>;
-				interrupt-parent = <&switch_intc>;
-				interrupts = <0>;
-			};
-			phy1: phy@1 {
-				reg = <1>;
-				interrupt-parent = <&switch_intc>;
-				interrupts = <1>;
-			};
-			phy2: phy@2 {
-				reg = <2>;
-				interrupt-parent = <&switch_intc>;
-				interrupts = <2>;
-			};
-			phy3: phy@3 {
-				reg = <3>;
-				interrupt-parent = <&switch_intc>;
-				interrupts = <3>;
-			};
-			phy4: phy@4 {
-				reg = <4>;
-				interrupt-parent = <&switch_intc>;
-				interrupts = <12>;
-			};
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			/*
-			 * Flash access collides with the Chip Enable signal for
-			 * the display panel, that reuse the parallel flash Chip
-			 * Select 1 (CS1). We switch the pin control state so we
-			 * enable these pins for flash access only when we need
-			 * then, and when disabled they can be used for GPIO which
-			 * is what the display panel needs.
-			 */
-			status = "okay";
-			pinctrl-names = "enabled", "disabled";
-			pinctrl-0 = <&pflash_default_pins>;
-			pinctrl-1 = <&pflash_disabled_pins>;
-
-			/* 32MB of flash */
-			reg = <0x30000000 0x02000000>;
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				/*
-				 * This "RedBoot" is the Storlink derivative.
-				 */
-				partition@0 {
-					label = "RedBoot";
-					reg = <0x00000000 0x00040000>;
-					read-only;
-				};
-				/*
-				 * This firmware image contains the kernel catenated
-				 * with the squashfs root filesystem. For some reason
-				 * this is called "upgrade" on the vendor system.
-				 */
-				partition@40000 {
-					label = "upgrade";
-					reg = <0x00040000 0x01f40000>;
-					read-only;
-				};
-				/* RGDB, Residental Gateway Database? */
-				partition@1f80000 {
-					label = "rgdb";
-					reg = <0x01f80000 0x00040000>;
-					read-only;
-				};
-				/*
-				 * This partition contains MAC addresses for WAN,
-				 * WLAN and LAN, and the country code (for wireless
-				 * I guess).
-				 */
-				partition@1fc0000 {
-					label = "nvram";
-					reg = <0x01fc0000 0x00020000>;
-					read-only;
-				};
-				partition@1fe0000 {
-					label = "LangPack";
-					reg = <0x01fe0000 0x00020000>;
-					read-only;
-				};
-			};
-		};
-
-		syscon: syscon@40000000 {
-			pinctrl {
-				/*
-				 * gpio0bgrp cover line 5, 6 used by TK I2C
-				 * gpio0bgrp cover line 7 used by WPS LED
-				 * gpio0cgrp cover line 8, 13 used by keys
-				 *           and 11, 12 used by the HD LEDs
-				 *           and line 14, 15 used by RTL8366
-				 *           RESET and phy ready
-				 * gpio0egrp cover line 16 used by VDISP
-				 * gpio0fgrp cover line 17 used by TK IRQ
-				 * gpio0ggrp cover line 20 used by panel CS
-				 * gpio0hgrp cover line 21,22 used by RTL8366RB MDIO
-				 */
-				gpio0_default_pins: pinctrl-gpio0 {
-					mux {
-						function = "gpio0";
-						groups = "gpio0bgrp",
-						"gpio0cgrp",
-						"gpio0egrp",
-						"gpio0fgrp",
-						"gpio0hgrp";
-					};
-				};
-				/*
-				 * gpio1bgrp cover line 5,8,7 used by panel SPI
-				 * also line 6 used by the fan
-				 *
-				 */
-				gpio1_default_pins: pinctrl-gpio1 {
-					mux {
-						function = "gpio1";
-						groups = "gpio1bgrp";
-					};
-				};
-				/*
-				 * These GPIO groups will be mapped in over some
-				 * of the flash pins when the flash is not in
-				 * active use.
-				 */
-				pflash_disabled_pins: pinctrl-pflash-disabled {
-					mux {
-						function = "gpio0";
-						groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
-							 "gpio0kgrp";
-					};
-				};
-				pinctrl-gmii {
-					mux {
-						function = "gmii";
-						groups = "gmii_gmac0_grp";
-					};
-					conf0 {
-						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV",
-						     "Y7 GMAC0 RXC", "Y11 GMAC1 RXC",
-						     "T8 GMAC0 TXEN", "W11 GMAC1 TXEN",
-						     "U8 GMAC0 TXC", "V11 GMAC1 TXC",
-						     "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
-						     "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
-						     "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
-						     "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
-						     "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
-						     "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
-						     "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
-						     "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
-						skew-delay = <7>;
-					};
-					/* Set up drive strength on GMAC0 to 16 mA */
-					conf1 {
-						groups = "gmii_gmac0_grp";
-						drive-strength = <16>;
-					};
-				};
-			};
-		};
-
-		sata: sata@46000000 {
-			cortina,gemini-ata-muxmode = <0>;
-			cortina,gemini-enable-sata-bridge;
-			status = "okay";
-		};
-
-		gpio0: gpio@4d000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_default_pins>;
-		};
-
-		gpio1: gpio@4e000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio1_default_pins>;
-		};
-
-		pci@50000000 {
-			status = "okay";
-		};
-
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-					pause;
-				};
-			};
-			ethernet-port@1 {
-				/* Not used in this platform */
-			};
-		};
-
-		ide@63000000 {
-			status = "okay";
-
-			/*
-			 * This drive may have a temperature sensor with a
-			 * thermal zone we can use for thermal control of the
-			 * chassis temperature using the fan.
-			 */
-			drive0: ide-port@0 {
-				reg = <0>;
-				#thermal-sensor-cells = <0>;
-			};
-		};
-
-		display-controller@6a000000 {
-			status = "okay";
-
-			port {
-				display_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-
-		usb@68000000 {
-			status = "okay";
-		};
-
-		usb@69000000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
deleted file mode 100644
index 138c47e1ac1b1..0000000000000
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ /dev/null
@@ -1,323 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	model = "D-Link DNS-313 1-Bay Network Storage Enclosure";
-	compatible = "dlink,dns-313", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait";
-		stdout-path = "uart0:19200n8";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-esc {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_ESC>;
-			label = "reset";
-			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-power {
-			label = "dns313:blue:power";
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		led-disk-blue {
-			label = "dns313:blue:disk";
-			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-disk-green {
-			label = "dns313:green:disk";
-			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "disk-read";
-		};
-		led-disk-red {
-			label = "dns313:red:disk";
-			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "disk-write";
-		};
-	};
-
-	/*
-	 * This is a ADDA AD0405GB-G73 fan @3000 and 6000 RPM.
-	 */
-	fan0: gpio-fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
-			<&gpio0 12 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>;
-		#cooling-cells = <2>;
-	};
-
-	/*
-	 * This is the type B USB connector on the device,
-	 * a GPIO-controlled USB VBUS detect
-	 */
-	usb1_phy: phy {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		#phy-cells = <0>;
-		vbus-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-	};
-
-	/* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
-	i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		g751: temperature-sensor@48 {
-			compatible = "gmt,g751";
-			reg = <0x48>;
-			#thermal-sensor-cells = <0>;
-		};
-	};
-
-	thermal-zones {
-		chassis-thermal {
-			/* Poll every 20 seconds */
-			polling-delay = <20000>;
-			/* Poll every 2nd second when cooling */
-			polling-delay-passive = <2000>;
-
-			thermal-sensors = <&g751>;
-
-			/* Tripping points from the fan.script in the rootfs */
-			trips {
-				chassis_alert0: chassis-alert0 {
-					/* At 43 degrees turn on low speed */
-					temperature = <43000>;
-					hysteresis = <3000>;
-					type = "active";
-				};
-				chassis_alert1: chassis-alert1 {
-					/* At 47 degrees turn on high speed */
-					temperature = <47000>;
-					hysteresis = <3000>;
-					type = "active";
-				};
-				chassis_crit: chassis-crit {
-					/* Just shut down at 60 degrees */
-					temperature = <60000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&chassis_alert0>;
-					cooling-device = <&fan0 1 1>;
-				};
-				map1 {
-					trip = <&chassis_alert1>;
-					cooling-device = <&fan0 2 2>;
-				};
-			};
-		};
-	};
-
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		/* Uses MDC and MDIO */
-		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* This is a Realtek RTL8211B Gigabit ethernet transceiver */
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-			device_type = "ethernet-phy";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			/*
-			 * This is a Eon EN29LV400AB 512 KiB flash with
-			 * three partitions.
-			 */
-			compatible = "cortina,gemini-flash", "jedec-flash";
-			status = "okay";
-			reg = <0x30000000 0x00080000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/*
-			 * This "RedBoot" is the Storlink derivative.
-			 */
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "MTD1";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "MTD2";
-				reg = <0x00060000 0x00020000>;
-				read-only;
-			};
-		};
-
-		syscon: syscon@40000000 {
-			pinctrl {
-				/*
-				 */
-				gpio0_default_pins: pinctrl-gpio0 {
-					mux {
-						function = "gpio0";
-						groups =
-						/* Used by LEDs conflicts ICE */
-						"gpio0bgrp",
-						/* Used by ? conflicts ICE */
-						"gpio0cgrp",
-						/*
-						 * Used by fan & G751, conflicts LPC,
-						 * UART modem lines, SSP
-						 */
-						"gpio0egrp",
-						/* Used by G751 */
-						"gpio0fgrp",
-						/* Used by MDIO */
-						"gpio0igrp";
-					};
-				};
-				gpio1_default_pins: pinctrl-gpio1 {
-					mux {
-						function = "gpio1";
-						/* Used by "reset" button */
-						groups = "gpio1dgrp";
-					};
-				};
-				pinctrl-gmii {
-					mux {
-						function = "gmii";
-						groups = "gmii_gmac0_grp";
-					};
-					/*
-					 * In the vendor Linux tree, these values are set for the C3
-					 * version of the SL3512 ASIC with the comment "benson suggest"
-					 */
-					conf0 {
-						pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
-						skew-delay = <0>;
-					};
-					conf1 {
-						pins = "T8 GMAC0 RXC";
-						skew-delay = <10>;
-					};
-					conf2 {
-						pins = "T11 GMAC1 RXC";
-						skew-delay = <15>;
-					};
-					conf3 {
-						pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
-						skew-delay = <7>;
-					};
-					conf4 {
-						pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC";
-						skew-delay = <10>;
-					};
-					conf5 {
-						/* The data lines all have default skew */
-						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
-						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
-						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
-						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
-						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
-						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
-						skew-delay = <7>;
-					};
-					conf6 {
-						pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
-						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
-						skew-delay = <5>;
-					};
-					/* Set up drive strength on GMAC0 to 16 mA */
-					conf7 {
-						groups = "gmii_gmac0_grp";
-						drive-strength = <16>;
-					};
-				};
-			};
-		};
-
-		sata: sata@46000000 {
-			/* The ROM uses this muxmode */
-			cortina,gemini-ata-muxmode = <0>;
-			cortina,gemini-enable-sata-bridge;
-			status = "okay";
-		};
-
-		gpio0: gpio@4d000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_default_pins>;
-		};
-
-		gpio1: gpio@4e000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio1_default_pins>;
-		};
-
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				/* Not used in this platform */
-			};
-		};
-
-		ide@63000000 {
-			status = "okay";
-		};
-
-		usb@69000000 {
-			status = "okay";
-			dr_mode = "peripheral";
-			usb-phy = <&usb1_phy>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_default_pins>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
deleted file mode 100644
index 6544c730340fa..0000000000000
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ /dev/null
@@ -1,189 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for the Gemini-based Raidsonic NAS IB-4220-B
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Raidsonic NAS IB-4220-B";
-	compatible = "raidsonic,ib-4220-b", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-setup {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "Backup button";
-			/* Conflict with TVC */
-			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-		};
-		button-restart {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_RESTART>;
-			label = "Softreset button";
-			/* Conflict with TVC */
-			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-orange-hdd {
-			label = "nas4220b:orange:hdd";
-			/* Conflict with TVC */
-			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-		led-green-os {
-			label = "nas4220b:green:os";
-			/* Conflict with TVC */
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-			device_type = "ethernet-phy";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 16MB of flash */
-			reg = <0x30000000 0x01000000>;
-
-			partitions {
-				compatible = "redboot-fis";
-				/* Eraseblock at 0xfe0000 */
-				fis-index-block = <0x7f>;
-			};
-		};
-
-		syscon: syscon@40000000 {
-			pinctrl {
-				/*
-				 * gpio1dgrp cover line 28-31 otherwise used
-				 * by TVC.
-				 */
-				gpio1_default_pins: pinctrl-gpio1 {
-					mux {
-						function = "gpio1";
-						groups = "gpio1dgrp";
-					};
-				};
-				pinctrl-gmii {
-					mux {
-						function = "gmii";
-						groups = "gmii_gmac0_grp";
-					};
-					/* Settings come from OpenWRT, pins on SL3516 */
-					conf0 {
-						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
-						skew-delay = <0>;
-					};
-					conf1 {
-						pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
-						skew-delay = <15>;
-					};
-					conf2 {
-						pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
-						skew-delay = <7>;
-					};
-					conf3 {
-						pins = "U8 GMAC0 TXC";
-						skew-delay = <11>;
-					};
-					conf4 {
-						pins = "V11 GMAC1 TXC";
-						skew-delay = <10>;
-					};
-					conf5 {
-						/* The data lines all have default skew */
-						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
-						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
-						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
-						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
-						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
-						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
-						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
-						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
-						skew-delay = <7>;
-					};
-					/* Set up drive strength on GMAC0 to 16 mA */
-					conf6 {
-						groups = "gmii_gmac0_grp";
-						drive-strength = <16>;
-					};
-				};
-			};
-		};
-
-		sata: sata@46000000 {
-			cortina,gemini-ata-muxmode = <0>;
-			cortina,gemini-enable-sata-bridge;
-			status = "okay";
-		};
-
-		gpio1: gpio@4e000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio1_default_pins>;
-		};
-
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				/* Not used in this platform */
-			};
-		};
-
-		ide@63000000 {
-			status = "okay";
-		};
-
-		ide@63400000 {
-			status = "okay";
-		};
-
-		usb@68000000 {
-			status = "okay";
-		};
-
-		usb@69000000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts
deleted file mode 100644
index e6eeb35e88198..0000000000000
--- a/arch/arm/boot/dts/gemini-ns2502.dts
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
- * Device Tree file for Edimax NS 2502
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-
-/ {
-	model = "Edimax NS-2502";
-	compatible = "edimax,ns-2502", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,19200n8";
-		stdout-path = &uart0;
-	};
-
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-			device_type = "ethernet-phy";
-		};
-	};
-};
-
-&ethernet {
-	status = "okay";
-	ethernet-port@0 {
-		phy-mode = "rgmii-id";
-		phy-handle = <&phy0>;
-	};
-};
-
-&flash {
-	status = "okay";
-	/* 8MB of flash */
-	reg = <0x30000000 0x00800000>;
-
-	pinctrl-names = "enabled", "disabled";
-	pinctrl-0 = <&pflash_default_pins>;
-	pinctrl-1 = <&pflash_disabled_pins>;
-
-	partitions {
-		compatible = "redboot-fis";
-		/* Eraseblock at 0x7e0000 */
-		fis-index-block = <0x3f>;
-	};
-};
-
-&gpio0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio0_default_pins>;
-};
-
-&ide0 {
-	status = "okay";
-};
-
-&ide1 {
-	status = "okay";
-};
-
-&sata {
-	cortina,gemini-ata-muxmode = <3>;
-	cortina,gemini-enable-sata-bridge;
-	status = "okay";
-};
-
-&syscon {
-	pinctrl {
-		/*
-		 * gpio0agrp cover line 0-4
-		 * gpio0bgrp cover line 5
-		 */
-		gpio0_default_pins: pinctrl-gpio0 {
-			    mux {
-				    function = "gpio0";
-				    groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp";
-			    };
-		};
-		pflash_disabled_pins: pinctrl-pflash-disabled {
-			mux {
-				function = "gpio0";
-				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
-					 "gpio0kgrp";
-			};
-		};
-		pinctrl-gmii {
-			mux {
-				function = "gmii";
-				groups = "gmii_gmac0_grp";
-				};
-		};
-	};
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
deleted file mode 100644
index 0ebda4efd9d0f..0000000000000
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Teltonika RUT1xx
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Teltonika RUT1xx";
-	compatible = "teltonika,rut1xx", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-setup {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "Reset to defaults";
-			/* Conflict with TVC */
-			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-gsm {
-			/* FIXME: add the LED color */
-			label = "rut1xx::gsm";
-			/* Conflict with ICE */
-			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-		led-power {
-			/* FIXME: add the LED color */
-			label = "rut1xx::power";
-			/* Conflict with NAND CE0 */
-			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-			device_type = "ethernet-phy";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 8MB of flash */
-			reg = <0x30000000 0x00800000>;
-			/* TODO: add flash partitions here */
-		};
-
-		syscon: syscon@40000000 {
-			pinctrl {
-				/*
-				 * gpio0bgrp cover line 7 used by GSM LED
-				 * gpio0fgrp cover line 17 used by power LED
-				 */
-				gpio0_default_pins: pinctrl-gpio0 {
-					mux {
-						function = "gpio0";
-						groups = "gpio0bgrp",
-						"gpio0fgrp";
-					};
-				};
-				/*
-				 * gpio1dgrp cover line 28-31 otherwise used
-				 * by TVC.
-				 */
-				gpio1_default_pins: pinctrl-gpio1 {
-					mux {
-						function = "gpio1";
-						groups = "gpio1dgrp";
-					};
-				};
-			};
-		};
-
-		gpio0: gpio@4d000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_default_pins>;
-		};
-
-		gpio1: gpio@4e000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio1_default_pins>;
-		};
-
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				/* Not used in this platform */
-			};
-		};
-
-		usb@68000000 {
-			status = "okay";
-		};
-
-		usb@69000000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts
deleted file mode 100644
index 91c19e8ebfe8b..0000000000000
--- a/arch/arm/boot/dts/gemini-sl93512r.dts
+++ /dev/null
@@ -1,294 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for the Storm Semiconductor SL93512R_BRD
- * Gemini reference design, also initially called
- * "Gemini324 EV-Board" before Storm acquired Storlink Semiconductor.
- * The series were later acquired by Cortina Systems.
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Storlink Semiconductor Gemini324 EV-Board / Storm Semiconductor SL93512R_BRD";
-	compatible = "storlink,gemini324", "storm,sl93512r", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 64 MB Samsung K4H511638B */
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			debounce-interval = <50>;
-			wakeup-source;
-			linux,code = <KEY_WPS_BUTTON>;
-			label = "WPS";
-			/* Conflicts with TVC and extended flash */
-			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-		};
-
-		button-setup {
-			debounce-interval = <50>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "factory reset";
-			/* Conflict with NAND flash */
-			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-green-harddisk {
-			label = "sq201:green:harddisk";
-			/* Conflict with LCD (no problem) */
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "disk-activity";
-		};
-		led-green-wireless {
-			label = "sq201:green:wireless";
-			/* Conflict with NAND flash CE0 (no problem) */
-			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		/* Uses MDC and MDIO */
-		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* This is a Marvell 88E1111 ethernet transciever */
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-		};
-	};
-
-	spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		/* Check pin collisions */
-		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-
-		switch@0 {
-			compatible = "vitesse,vsc7385";
-			reg = <0>;
-			/* Specified for 2.5 MHz or below */
-			spi-max-frequency = <2500000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan1";
-				};
-				port@1 {
-					reg = <1>;
-					label = "lan2";
-				};
-				port@2 {
-					reg = <2>;
-					label = "lan3";
-				};
-				port@3 {
-					reg = <3>;
-					label = "lan4";
-				};
-				vsc: port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac1>;
-					phy-mode = "rgmii";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-						pause;
-					};
-				};
-			};
-		};
-	};
-
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 16MB of flash */
-			reg = <0x30000000 0x01000000>;
-
-			partitions {
-				compatible = "redboot-fis";
-				/* Eraseblock at 0xfe0000 */
-				fis-index-block = <0x1fc>;
-			};
-		};
-
-		syscon: syscon@40000000 {
-			pinctrl {
-				/*
-				 * gpio0agrp cover line 0, used by WPS button
-				 * gpio0fgrp cover line 16 used by HD LED
-				 * gpio0ggrp cover line 17, 18 used by wireless LAN LED and
-				 * reset button OR USB ID select on 17 and USB VBUS select
-				 * on 18. (Confusing.)
-				 * gpio0igrp cover line 21, 22 used by MDIO for Marvell PHY
-				 */
-				gpio0_default_pins: pinctrl-gpio0 {
-					mux {
-						function = "gpio0";
-						groups = "gpio0agrp",
-						"gpio0fgrp",
-						"gpio0ggrp",
-						"gpio0igrp";
-					};
-				};
-				/*
-				 * gpio1dgrp cover lines used by SPI for
-				 * the Vitesse chip (28-31)
-				 */
-				gpio1_default_pins: pinctrl-gpio1 {
-					mux {
-						function = "gpio1";
-						groups = "gpio1dgrp";
-					};
-				};
-				pinctrl-gmii {
-					mux {
-						function = "gmii";
-						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
-					};
-					/* Control pad skew comes from sl_switch.c in the vendor code */
-					conf0 {
-						pins = "P10 GMAC1 TXC";
-						skew-delay = <5>;
-					};
-					conf1 {
-						pins = "V11 GMAC1 TXEN";
-						skew-delay = <7>;
-					};
-					conf2 {
-						pins = "T11 GMAC1 RXC";
-						skew-delay = <8>;
-					};
-					conf3 {
-						pins = "U11 GMAC1 RXDV";
-						skew-delay = <7>;
-					};
-					conf4 {
-						pins = "V7 GMAC0 TXC";
-						skew-delay = <10>;
-					};
-					conf5 {
-						pins = "P8 GMAC0 TXEN";
-						skew-delay = <7>; /* 5 at another place? */
-					};
-					conf6 {
-						pins = "T8 GMAC0 RXC";
-						skew-delay = <15>;
-					};
-					conf7 {
-						pins = "R8 GMAC0 RXDV";
-						skew-delay = <0>;
-					};
-					conf8 {
-						/* The data lines all have default skew */
-						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
-						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
-						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
-						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
-						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
-						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
-						skew-delay = <7>;
-					};
-					/* Appears in sl351x_gmac.c in the vendor code */
-					conf9 {
-						pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
-						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
-						skew-delay = <5>;
-					};
-				};
-			};
-		};
-
-		/* Both interfaces brought out on SATA connectors */
-		sata: sata@46000000 {
-			cortina,gemini-ata-muxmode = <0>;
-			cortina,gemini-enable-sata-bridge;
-			status = "okay";
-		};
-
-		gpio0: gpio@4d000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_default_pins>;
-		};
-
-		gpio1: gpio@4e000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio1_default_pins>;
-		};
-
-		pci@50000000 {
-			status = "okay";
-		};
-
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				phy-mode = "rgmii";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-					pause;
-				};
-			};
-		};
-
-		ide@63000000 {
-			status = "okay";
-		};
-
-		ide@63400000 {
-			status = "okay";
-		};
-
-		usb@68000000 {
-			status = "okay";
-		};
-
-		usb@69000000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
deleted file mode 100644
index d0efd76695da6..0000000000000
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ /dev/null
@@ -1,286 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for ITian Square One SQ201 NAS
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "ITian Square One SQ201";
-	compatible = "itian,sq201", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-setup {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "factory reset";
-			/* Conflict with NAND flash */
-			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-green-info {
-			label = "sq201:green:info";
-			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		led-green-usb {
-			label = "sq201:green:usb";
-			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "usb-host";
-		};
-	};
-
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		/* Uses MDC and MDIO */
-		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* This is a Marvell 88E1111 ethernet transciever */
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-		};
-	};
-
-	spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		/* Check pin collisions */
-		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-
-		switch@0 {
-			compatible = "vitesse,vsc7395";
-			reg = <0>;
-			/* Specified for 2.5 MHz or below */
-			spi-max-frequency = <2500000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan1";
-				};
-				port@1 {
-					reg = <1>;
-					label = "lan2";
-				};
-				port@2 {
-					reg = <2>;
-					label = "lan3";
-				};
-				port@3 {
-					reg = <3>;
-					label = "lan4";
-				};
-				vsc: port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac1>;
-					phy-mode = "rgmii";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-						pause;
-					};
-				};
-			};
-		};
-	};
-
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			pinctrl-names = "enabled", "disabled";
-			pinctrl-0 = <&pflash_default_pins>;
-			pinctrl-1 = <&pflash_disabled_pins>;
-			/* 16MB of flash */
-			reg = <0x30000000 0x01000000>;
-
-			partitions {
-				compatible = "redboot-fis";
-				/* Eraseblock at 0xfe0000 */
-				fis-index-block = <0x1fc>;
-			};
-		};
-
-		syscon: syscon@40000000 {
-			pinctrl {
-				/*
-				 * gpio0fgrp cover line 18 used by reset button
-				 * gpio0ggrp cover line 20 used by info LED
-				 * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY
-				 * gpio0kgrp cover line 31 used by USB LED
-				 */
-				gpio0_default_pins: pinctrl-gpio0 {
-					mux {
-						function = "gpio0";
-						groups = "gpio0fgrp",
-						"gpio0hgrp";
-					};
-				};
-				/*
-				 * gpio0dgrp cover lines used by the SPI
-				 * to the Vitesse G5x chip.
-				 */
-				gpio1_default_pins: pinctrl-gpio1 {
-					mux {
-						function = "gpio1";
-						groups = "gpio1dgrp";
-					};
-				};
-				/*
-				 * These GPIO groups will be mapped in over some
-				 * of the flash pins when the flash is not in
-				 * active use.
-				 */
-				pflash_disabled_pins: pinctrl-pflash-disabled {
-					mux {
-						function = "gpio0";
-						groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
-							 "gpio0kgrp";
-					};
-				};
-				pinctrl-gmii {
-					mux {
-						function = "gmii";
-						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
-					};
-					/* Settings come from memory dump in PLATO */
-					conf0 {
-						pins = "V8 GMAC0 RXDV";
-						skew-delay = <0>;
-					};
-					conf1 {
-						pins = "Y7 GMAC0 RXC";
-						skew-delay = <15>;
-					};
-					conf2 {
-						pins = "T8 GMAC0 TXEN";
-						skew-delay = <7>;
-					};
-					conf3 {
-						pins = "U8 GMAC0 TXC";
-						skew-delay = <10>;
-					};
-					conf4 {
-						pins = "T10 GMAC1 RXDV";
-						skew-delay = <7>;
-					};
-					conf5 {
-						pins = "Y11 GMAC1 RXC";
-						skew-delay = <8>;
-					};
-					conf6 {
-						pins = "W11 GMAC1 TXEN";
-						skew-delay = <7>;
-					};
-					conf7 {
-						pins = "V11 GMAC1 TXC";
-						skew-delay = <5>;
-					};
-					conf8 {
-						/* The data lines all have default skew */
-						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
-						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
-						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
-						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
-						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
-						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
-						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
-						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
-						skew-delay = <7>;
-					};
-					/* Set up drive strength on GMAC0 and GMAC1 to 16 mA */
-					conf9 {
-						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
-						drive-strength = <16>;
-					};
-				};
-			};
-		};
-
-		sata: sata@46000000 {
-			cortina,gemini-ata-muxmode = <0>;
-			cortina,gemini-enable-sata-bridge;
-			status = "okay";
-		};
-
-		gpio0: gpio@4d000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_default_pins>;
-		};
-
-		gpio1: gpio@4e000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio1_default_pins>;
-		};
-
-		pci@50000000 {
-			status = "okay";
-		};
-
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				phy-mode = "rgmii";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-					pause;
-				};
-			};
-		};
-
-		ide@63000000 {
-			status = "okay";
-		};
-
-		usb@68000000 {
-			status = "okay";
-		};
-
-		usb@69000000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts
deleted file mode 100644
index 42e85f07cf764..0000000000000
--- a/arch/arm/boot/dts/gemini-ssi1328.dts
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
- * Device Tree file for SSI 1328
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-
-/ {
-	model = "SSI 1328";
-	compatible = "ssi,1328", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
-		stdout-path = &uart0;
-	};
-
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* LAN Marvell 88E1118 */
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-			device_type = "ethernet-phy";
-		};
-		/* WAN ICPlus IP101A */
-		phy1: ethernet-phy@2 {
-			reg = <2>;
-			device_type = "ethernet-phy";
-		};
-	};
-};
-
-&ethernet {
-	status = "okay";
-	ethernet-port@0 {
-		phy-mode = "rgmii";
-		phy-handle = <&phy0>;
-	};
-	ethernet-port@1 {
-		phy-mode = "rgmii";
-		phy-handle = <&phy1>;
-	};
-};
-
-&flash {
-	status = "okay";
-	/* 32MB of flash */
-	reg = <0x30000000 0x03200000>;
-
-	pinctrl-names = "enabled", "disabled";
-	pinctrl-0 = <&pflash_default_pins>;
-	pinctrl-1 = <&pflash_disabled_pins>;
-
-	partitions {
-		compatible = "redboot-fis";
-		/* Eraseblock at 0xfe0000 */
-		fis-index-block = <0x7F>;
-	};
-};
-
-&gpio0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio0_default_pins>;
-};
-
-&ide0 {
-	status = "okay";
-};
-
-&ide1 {
-	status = "okay";
-};
-
-&sata {
-	cortina,gemini-ata-muxmode = <0>;
-	cortina,gemini-enable-sata-bridge;
-	status = "okay";
-};
-
-&syscon {
-	pinctrl {
-		/*
-		 * gpio0agrp cover line 0-4
-		 * gpio0bgrp cover line 5
-		 */
-		gpio0_default_pins: pinctrl-gpio0 {
-			mux {
-				function = "gpio0";
-				groups = "gpio0agrp", "gpio0bgrp";
-			};
-		};
-		pflash_disabled_pins: pinctrl-pflash-disabled {
-			mux {
-				function = "gpio0";
-				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
-					 "gpio0kgrp";
-			};
-		};
-		pinctrl-gmii {
-			/* This platform use both the ethernet ports */
-			mux {
-				function = "gmii";
-				groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
-			};
-		};
-	};
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
deleted file mode 100644
index 3c88c59ab481c..0000000000000
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ /dev/null
@@ -1,142 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Wiliboard WBD-111
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Wiliboard WBD-111";
-	compatible = "wiliboard,wbd111", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-setup {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "reset";
-			/* Conflict with ICE */
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-red-l3 {
-			label = "wbd111:red:L3";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-green-l4 {
-			label = "wbd111:green:L4";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-red-l4 {
-			label = "wbd111:red:L4";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-greeb-l3 {
-			label = "wbd111:green:L3";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-			device_type = "ethernet-phy";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 8MB of flash */
-			reg = <0x30000000 0x00800000>;
-
-			partitions {
-				compatible = "redboot-fis";
-				/* Eraseblock at 0x7e0000 */
-				fis-index-block = <0x3f>;
-			};
-		};
-
-		syscon: syscon@40000000 {
-			pinctrl {
-				/*
-				 * gpio0agrp cover line 0-4
-				 * gpio0bgrp cover line 5
-				 */
-				gpio0_default_pins: pinctrl-gpio0 {
-					mux {
-						function = "gpio0";
-						groups = "gpio0agrp",
-						"gpio0bgrp";
-					};
-				};
-			};
-		};
-
-		gpio0: gpio@4d000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_default_pins>;
-		};
-
-		pci@50000000 {
-			status = "okay";
-		};
-
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				/* Not used in this platform */
-			};
-		};
-
-		usb@68000000 {
-			status = "okay";
-		};
-
-		usb@69000000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
deleted file mode 100644
index ff72bbc4db3e2..0000000000000
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Wiliboard WBD-222
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Wiliboard WBD-222";
-	compatible = "wiliboard,wbd222", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-setup {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "reset";
-			/* Conflict with ICE */
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-red-l3 {
-			label = "wbd111:red:L3";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-green-l4 {
-			label = "wbd111:green:L4";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-red-l4 {
-			label = "wbd111:red:L4";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-green-l3 {
-			label = "wbd111:green:L3";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-			device_type = "ethernet-phy";
-		};
-
-		phy1: ethernet-phy@3 {
-			reg = <3>;
-			device_type = "ethernet-phy";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 8MB of flash */
-			reg = <0x30000000 0x00800000>;
-
-			partitions {
-				compatible = "redboot-fis";
-				/* Eraseblock at 0x7e0000 */
-				fis-index-block = <0x3f>;
-			};
-		};
-
-		syscon: syscon@40000000 {
-			pinctrl {
-				/*
-				 * gpio0agrp cover line 0-4
-				 * gpio0bgrp cover line 5
-				 */
-				gpio0_default_pins: pinctrl-gpio0 {
-					mux {
-						function = "gpio0";
-						groups = "gpio0agrp",
-						"gpio0bgrp";
-					};
-				};
-				pinctrl-gmii {
-					/* This platform use both the ethernet ports */
-					mux {
-						function = "gmii";
-						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
-					};
-				};
-			};
-		};
-
-		gpio0: gpio@4d000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_default_pins>;
-		};
-
-		pci@50000000 {
-			status = "okay";
-		};
-
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy1>;
-			};
-		};
-
-		usb@68000000 {
-			status = "okay";
-		};
-
-		usb@69000000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
deleted file mode 100644
index befe322bd7de9..0000000000000
--- a/arch/arm/boot/dts/gemini.dtsi
+++ /dev/null
@@ -1,475 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Cortina systems Gemini SoC
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/cortina,gemini-clock.h>
-#include <dt-bindings/reset/cortina,gemini-reset.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-		interrupt-parent = <&intcon>;
-
-		flash: flash@30000000 {
-			compatible = "cortina,gemini-flash", "cfi-flash";
-			syscon = <&syscon>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pflash_default_pins>;
-			bank-width = <2>;
-			status = "disabled";
-		};
-
-		syscon: syscon@40000000 {
-			compatible = "cortina,gemini-syscon",
-				     "syscon", "simple-mfd";
-			reg = <0x40000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-
-			syscon-reboot {
-				compatible = "syscon-reboot";
-				regmap = <&syscon>;
-				/* GLOBAL_RESET register */
-				offset = <0x0c>;
-				/* RESET_GLOBAL | RESET_CPU1 */
-				mask = <0xC0000000>;
-			};
-
-			pinctrl {
-				compatible = "cortina,gemini-pinctrl";
-				regmap = <&syscon>;
-				/* Hog the DRAM pins */
-				pinctrl-names = "default";
-				pinctrl-0 = <&dram_default_pins>, <&system_default_pins>,
-					    <&vcontrol_default_pins>;
-
-				dram_default_pins: pinctrl-dram {
-					mux {
-						function = "dram";
-						groups = "dramgrp";
-					};
-				};
-				rtc_default_pins: pinctrl-rtc {
-					mux {
-						function = "rtc";
-						groups = "rtcgrp";
-					};
-				};
-				power_default_pins: pinctrl-power {
-					mux {
-						function = "power";
-						groups = "powergrp";
-					};
-				};
-				cir_default_pins: pinctrl-cir {
-					mux {
-						function = "cir";
-						groups = "cirgrp";
-					};
-				};
-				system_default_pins: pinctrl-system {
-					mux {
-						function = "system";
-						groups = "systemgrp";
-					};
-				};
-				vcontrol_default_pins: pinctrl-vcontrol {
-					mux {
-						function = "vcontrol";
-						groups = "vcontrolgrp";
-					};
-				};
-				ice_default_pins: pinctrl-ice {
-					mux {
-						function = "ice";
-						groups = "icegrp";
-					};
-				};
-				uart_default_pins: pinctrl-uart {
-					mux {
-						function = "uart";
-						groups = "uartrxtxgrp";
-					};
-				};
-				pflash_default_pins: pinctrl-pflash {
-					mux {
-						function = "pflash";
-						groups = "pflashgrp";
-					};
-				};
-				usb_default_pins: pinctrl-usb {
-					mux {
-						function = "usb";
-						groups = "usbgrp";
-					};
-				};
-				gmii_default_pins: pinctrl-gmii {
-					/*
-					 * Only activate GMAC0 by default since
-					 * GMAC1 will overlap with 8 GPIO lines
-					 * gpio2a, gpio2b. Overlay groups with
-					 * "gmii_gmac0_grp", "gmii_gmac1_grp" for
-					 * both ethernet interfaces.
-					 */
-					mux {
-						function = "gmii";
-						groups = "gmii_gmac0_grp";
-					};
-				};
-				pci_default_pins: pinctrl-pci {
-					mux {
-						function = "pci";
-						groups = "pcigrp";
-					};
-				};
-				sata_default_pins: pinctrl-sata {
-					mux {
-						function = "sata";
-						groups = "satagrp";
-					};
-				};
-				/* Activate both groups of pins for this state */
-				sata_and_ide_pins: pinctrl-sata-ide {
-					mux0 {
-						function = "sata";
-						groups = "satagrp";
-					};
-					mux1 {
-						function = "ide";
-						groups = "idegrp";
-					};
-				};
-				tvc_default_pins: pinctrl-tvc {
-					mux {
-						function = "tvc";
-						groups = "tvcgrp";
-					};
-				};
-			};
-		};
-
-		watchdog@41000000 {
-			compatible = "cortina,gemini-watchdog", "faraday,ftwdt010";
-			reg = <0x41000000 0x1000>;
-			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&syscon GEMINI_RESET_WDOG>;
-			clocks = <&syscon GEMINI_CLK_APB>;
-			clock-names = "PCLK";
-		};
-
-		uart0: serial@42000000 {
-			compatible = "ns16550a";
-			reg = <0x42000000 0x100>;
-			resets = <&syscon GEMINI_RESET_UART>;
-			clocks = <&syscon GEMINI_CLK_UART>;
-			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart_default_pins>;
-			reg-shift = <2>;
-		};
-
-		timer@43000000 {
-			compatible = "faraday,fttmr010";
-			reg = <0x43000000 0x1000>;
-			interrupt-parent = <&intcon>;
-			interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
-				     <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
-				     <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
-			resets = <&syscon GEMINI_RESET_TIMER>;
-			/* APB clock or RTC clock */
-			clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
-			clock-names = "PCLK", "EXTCLK";
-			syscon = <&syscon>;
-		};
-
-		rtc@45000000 {
-			compatible = "cortina,gemini-rtc", "faraday,ftrtc010";
-			reg = <0x45000000 0x100>;
-			interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&syscon GEMINI_RESET_RTC>;
-			clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
-			clock-names = "PCLK", "EXTCLK";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rtc_default_pins>;
-		};
-
-		sata: sata@46000000 {
-			compatible = "cortina,gemini-sata-bridge";
-			reg = <0x46000000 0x100>;
-			resets = <&syscon GEMINI_RESET_SATA0>,
-				 <&syscon GEMINI_RESET_SATA1>;
-			reset-names = "sata0", "sata1";
-			clocks = <&syscon GEMINI_CLK_GATE_SATA0>,
-				 <&syscon GEMINI_CLK_GATE_SATA1>;
-			clock-names = "SATA0_PCLK", "SATA1_PCLK";
-			/*
-			 * This defines the special "ide" state that needs
-			 * to be explicitly enabled to enable the IDE pins,
-			 * as these pins are normally used for other things.
-			 */
-			pinctrl-names = "default", "ide";
-			pinctrl-0 = <&sata_default_pins>;
-			pinctrl-1 = <&sata_and_ide_pins>;
-			syscon = <&syscon>;
-			status = "disabled";
-		};
-
-		intcon: interrupt-controller@48000000 {
-			compatible = "faraday,ftintc010";
-			reg = <0x48000000 0x1000>;
-			resets = <&syscon GEMINI_RESET_INTCON0>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		power-controller@4b000000 {
-			compatible = "cortina,gemini-power-controller";
-			reg = <0x4b000000 0x100>;
-			interrupts = <26 IRQ_TYPE_EDGE_RISING>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&power_default_pins>;
-		};
-
-		gpio0: gpio@4d000000 {
-			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
-			reg = <0x4d000000 0x100>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&syscon GEMINI_RESET_GPIO0>;
-			clocks = <&syscon GEMINI_CLK_APB>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio1: gpio@4e000000 {
-			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
-			reg = <0x4e000000 0x100>;
-			interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&syscon GEMINI_RESET_GPIO1>;
-			clocks = <&syscon GEMINI_CLK_APB>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@4f000000 {
-			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
-			reg = <0x4f000000 0x100>;
-			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&syscon GEMINI_RESET_GPIO2>;
-			clocks = <&syscon GEMINI_CLK_APB>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pci@50000000 {
-			compatible = "cortina,gemini-pci", "faraday,ftpci100";
-			/*
-			 * The first 256 bytes in the IO range is actually used
-			 * to configure the host bridge.
-			 */
-			reg = <0x50000000 0x100>;
-			resets = <&syscon GEMINI_RESET_PCI>;
-			clocks = <&syscon GEMINI_CLK_GATE_PCI>, <&syscon GEMINI_CLK_PCI>;
-			clock-names = "PCLK", "PCICLK";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pci_default_pins>;
-			device_type = "pci";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			status = "disabled";
-
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
-
-			bus-range = <0x00 0xff>;
-			/* PCI ranges mappings */
-			ranges =
-			/* 1MiB I/O space 0x50000000-0x500fffff */
-			<0x01000000 0 0          0x50000000 0 0x00100000>,
-			/* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
-			<0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
-
-			/* DMA ranges */
-			dma-ranges =
-			/* 128MiB at 0x00000000-0x07ffffff */
-			<0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
-			/* 64MiB at 0x00000000-0x03ffffff */
-			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
-			/* 64MiB at 0x00000000-0x03ffffff */
-			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
-
-			/*
-			 * This PCI host bridge variant has a cascaded interrupt
-			 * controller embedded in the host bridge.
-			 */
-			pci_intc: interrupt-controller {
-				interrupt-parent = <&intcon>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		ethernet: ethernet@60000000 {
-			compatible = "cortina,gemini-ethernet";
-			reg = <0x60000000 0x4000>, /* Global registers, queue */
-			      <0x60004000 0x2000>, /* V-bit */
-			      <0x60006000 0x2000>; /* A-bit */
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmii_default_pins>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gmac0: ethernet-port@0 {
-				compatible = "cortina,gemini-ethernet-port";
-				reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
-				      <0x6000a000 0x2000>; /* Port 0 GMAC */
-				interrupt-parent = <&intcon>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-				resets = <&syscon GEMINI_RESET_GMAC0>;
-				clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
-				clock-names = "PCLK";
-			};
-
-			gmac1: ethernet-port@1 {
-				compatible = "cortina,gemini-ethernet-port";
-				reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
-				      <0x6000e000 0x2000>; /* Port 1 GMAC */
-				interrupt-parent = <&intcon>;
-				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-				resets = <&syscon GEMINI_RESET_GMAC1>;
-				clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
-				clock-names = "PCLK";
-			};
-		};
-
-		crypto: crypto@62000000 {
-			compatible = "cortina,sl3516-crypto";
-			reg = <0x62000000 0x10000>;
-			interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-			resets = <&syscon GEMINI_RESET_SECURITY>;
-			clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
-		};
-
-		ide0: ide@63000000 {
-			compatible = "cortina,gemini-pata", "faraday,ftide010";
-			reg = <0x63000000 0x1000>;
-			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
-			resets = <&syscon GEMINI_RESET_IDE>;
-			clocks = <&syscon GEMINI_CLK_GATE_IDE>;
-			clock-names = "PCLK";
-			sata = <&sata>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		ide1: ide@63400000 {
-			compatible = "cortina,gemini-pata", "faraday,ftide010";
-			reg = <0x63400000 0x1000>;
-			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
-			resets = <&syscon GEMINI_RESET_IDE>;
-			clocks = <&syscon GEMINI_CLK_GATE_IDE>;
-			clock-names = "PCLK";
-			sata = <&sata>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		dma-controller@67000000 {
-			compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell";
-			/* Faraday Technology FTDMAC020 variant */
-			arm,primecell-periphid = <0x0003b080>;
-			reg = <0x67000000 0x1000>;
-			interrupts = <9 IRQ_TYPE_EDGE_RISING>;
-			resets = <&syscon GEMINI_RESET_DMAC>;
-			clocks = <&syscon GEMINI_CLK_AHB>;
-			clock-names = "apb_pclk";
-			/* Bus interface AHB1 (AHB0) is totally tilted */
-			lli-bus-interface-ahb2;
-			mem-bus-interface-ahb2;
-			memcpy-burst-size = <256>;
-			memcpy-bus-width = <32>;
-			#dma-cells = <2>;
-		};
-
-		display-controller@6a000000 {
-			compatible = "cortina,gemini-tvc", "faraday,tve200";
-			reg = <0x6a000000 0x1000>;
-			interrupts = <13 IRQ_TYPE_EDGE_RISING>;
-			resets = <&syscon GEMINI_RESET_TVC>;
-			clocks = <&syscon GEMINI_CLK_GATE_TVC>,
-				 <&syscon GEMINI_CLK_TVC>;
-			clock-names = "PCLK", "TVE";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tvc_default_pins>;
-			status = "disabled";
-		};
-
-		usb0: usb@68000000 {
-			compatible = "cortina,gemini-usb", "faraday,fotg200";
-			reg = <0x68000000 0x1000>;
-			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&syscon GEMINI_RESET_USB0>;
-			clocks = <&syscon GEMINI_CLK_GATE_USB0>;
-			clock-names = "PCLK";
-			/*
-			 * This will claim pins for USB0 and USB1 at the same
-			 * time as they are using some common pins. If you for
-			 * some reason have a system using USB1 at 96000000 but
-			 * NOT using USB0 at 68000000 you wll have to add the
-			 * usb_default_pins to the USB controller at 96000000
-			 * in your .dts for the board.
-			 */
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_default_pins>;
-			/* Default to host mode */
-			dr_mode = "host";
-			syscon = <&syscon>;
-			status = "disabled";
-		};
-
-		usb1: usb@69000000 {
-			compatible = "cortina,gemini-usb", "faraday,fotg200";
-			reg = <0x69000000 0x1000>;
-			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&syscon GEMINI_RESET_USB1>;
-			clocks = <&syscon GEMINI_CLK_GATE_USB1>;
-			clock-names = "PCLK";
-			syscon = <&syscon>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini/Makefile b/arch/arm/boot/dts/gemini/Makefile
new file mode 100644
index 0000000000000..f9f63ce3eb496
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_GEMINI) += \
+	gemini-dlink-dir-685.dtb \
+	gemini-dlink-dns-313.dtb \
+	gemini-nas4220b.dtb \
+	gemini-ns2502.dtb \
+	gemini-rut1xx.dtb \
+	gemini-sl93512r.dtb \
+	gemini-sq201.dtb \
+	gemini-ssi1328.dtb \
+	gemini-wbd111.dtb \
+	gemini-wbd222.dtb
diff --git a/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
new file mode 100644
index 0000000000000..396149664297f
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
@@ -0,0 +1,492 @@
+/*
+ * Device Tree file for D-Link DIR-685 Xtreme N Storage Router
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DIR-685 Xtreme N Storage Router";
+	compatible = "dlink,dir-685", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB SDRAM in 2 x Hynix HY5DU121622DTP-D43 */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
+		stdout-path = "uart0:19200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-esc {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+		button-eject {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_EJECTCD>;
+			label = "unmount";
+			/* Collides with LPC LFRAME, UART RTS, SSP TXD */
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vdisp: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "display-power";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		/* Collides with LCD E */
+		gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Collides with IDE pins, that's cool (we do not use them) */
+		sck-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		panel: display@0 {
+			compatible = "dlink,dir-685-panel", "ilitek,ili9322";
+			reg = <0>;
+			/* 50 ns min period = 20 MHz */
+			spi-max-frequency = <20000000>;
+			vcc-supply = <&vdisp>;
+			iovcc-supply = <&vdisp>;
+			vci-supply = <&vdisp>;
+
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&display_out>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-wps {
+			label = "dir685:blue:WPS";
+			/* Collides with ICE */
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		/*
+		 * These two LEDs are on the side of the device.
+		 * For electrical reasons, both LEDs cannot be active
+		 * at the same time so only blue or orange can be on at
+		 * one time. Enabling both makes the LED go dark.
+		 * The LEDs both sit inside the unmount button and the
+		 * label on the case says "unmount".
+		 */
+		led-blue-hd {
+			label = "dir685:blue:HD";
+			/* Collides with LPC_SERIRQ, UART DTR, SSP FSC pins */
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-read";
+		};
+		led-orange-hd {
+			label = "dir685:orange:HD";
+			/* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-write";
+		};
+	};
+
+	/*
+	 * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
+	 * sensor. It is turned on when the temperature exceeds 46 degrees
+	 * and turned off when the temperatures goes below 41 degrees
+	 * (celsius).
+	 */
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		/* Collides with IDE */
+		gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <10000 1>;
+		#cooling-cells = <2>;
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			/* Poll every 20 seconds */
+			polling-delay = <20000>;
+			/* Poll every 2nd second when cooling */
+			polling-delay-passive = <2000>;
+			/*  Use the thermal sensor in the hard drive */
+			thermal-sensors = <&drive0>;
+
+			/* Tripping points from the fan.script in the rootfs */
+			trips {
+				alert: chassis-alert {
+					/* At 43 degrees turn on the fan */
+					temperature = <43000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				crit: chassis-crit {
+					/* Just shut down at 60 degrees */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&alert>;
+					cooling-device = <&fan0 1 1>;
+				};
+			};
+		};
+	};
+
+	/*
+	 * The touchpad input is connected to a GPIO bit-banged
+	 * I2C bus.
+	 */
+	i2c {
+		compatible = "i2c-gpio";
+		/* Collides with ICE */
+		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkeys@26 {
+			compatible = "dlink,dir685-touchkeys";
+			reg = <0x26>;
+			interrupt-parent = <&gpio0>;
+			/* Collides with NAND flash */
+			interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	/* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */
+	switch {
+		compatible = "realtek,rtl8366rb";
+		/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
+		mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+
+		switch_intc: interrupt-controller {
+			/* GPIO 15 provides the interrupt */
+			interrupt-parent = <&gpio0>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan0";
+				phy-handle = <&phy0>;
+			};
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-handle = <&phy1>;
+			};
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-handle = <&phy2>;
+			};
+			port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-handle = <&phy3>;
+			};
+			port@4 {
+				reg = <4>;
+				label = "wan";
+				phy-handle = <&phy4>;
+			};
+			rtl8366rb_cpu_port: port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&gmac0>;
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+
+		};
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: phy@0 {
+				reg = <0>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <0>;
+			};
+			phy1: phy@1 {
+				reg = <1>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <1>;
+			};
+			phy2: phy@2 {
+				reg = <2>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <2>;
+			};
+			phy3: phy@3 {
+				reg = <3>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <3>;
+			};
+			phy4: phy@4 {
+				reg = <4>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <12>;
+			};
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			/*
+			 * Flash access collides with the Chip Enable signal for
+			 * the display panel, that reuse the parallel flash Chip
+			 * Select 1 (CS1). We switch the pin control state so we
+			 * enable these pins for flash access only when we need
+			 * then, and when disabled they can be used for GPIO which
+			 * is what the display panel needs.
+			 */
+			status = "okay";
+			pinctrl-names = "enabled", "disabled";
+			pinctrl-0 = <&pflash_default_pins>;
+			pinctrl-1 = <&pflash_disabled_pins>;
+
+			/* 32MB of flash */
+			reg = <0x30000000 0x02000000>;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/*
+				 * This "RedBoot" is the Storlink derivative.
+				 */
+				partition@0 {
+					label = "RedBoot";
+					reg = <0x00000000 0x00040000>;
+					read-only;
+				};
+				/*
+				 * This firmware image contains the kernel catenated
+				 * with the squashfs root filesystem. For some reason
+				 * this is called "upgrade" on the vendor system.
+				 */
+				partition@40000 {
+					label = "upgrade";
+					reg = <0x00040000 0x01f40000>;
+					read-only;
+				};
+				/* RGDB, Residental Gateway Database? */
+				partition@1f80000 {
+					label = "rgdb";
+					reg = <0x01f80000 0x00040000>;
+					read-only;
+				};
+				/*
+				 * This partition contains MAC addresses for WAN,
+				 * WLAN and LAN, and the country code (for wireless
+				 * I guess).
+				 */
+				partition@1fc0000 {
+					label = "nvram";
+					reg = <0x01fc0000 0x00020000>;
+					read-only;
+				};
+				partition@1fe0000 {
+					label = "LangPack";
+					reg = <0x01fe0000 0x00020000>;
+					read-only;
+				};
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0bgrp cover line 5, 6 used by TK I2C
+				 * gpio0bgrp cover line 7 used by WPS LED
+				 * gpio0cgrp cover line 8, 13 used by keys
+				 *           and 11, 12 used by the HD LEDs
+				 *           and line 14, 15 used by RTL8366
+				 *           RESET and phy ready
+				 * gpio0egrp cover line 16 used by VDISP
+				 * gpio0fgrp cover line 17 used by TK IRQ
+				 * gpio0ggrp cover line 20 used by panel CS
+				 * gpio0hgrp cover line 21,22 used by RTL8366RB MDIO
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0bgrp",
+						"gpio0cgrp",
+						"gpio0egrp",
+						"gpio0fgrp",
+						"gpio0hgrp";
+					};
+				};
+				/*
+				 * gpio1bgrp cover line 5,8,7 used by panel SPI
+				 * also line 6 used by the fan
+				 *
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1bgrp";
+					};
+				};
+				/*
+				 * These GPIO groups will be mapped in over some
+				 * of the flash pins when the flash is not in
+				 * active use.
+				 */
+				pflash_disabled_pins: pinctrl-pflash-disabled {
+					mux {
+						function = "gpio0";
+						groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+							 "gpio0kgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					conf0 {
+						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV",
+						     "Y7 GMAC0 RXC", "Y11 GMAC1 RXC",
+						     "T8 GMAC0 TXEN", "W11 GMAC1 TXEN",
+						     "U8 GMAC0 TXC", "V11 GMAC1 TXC",
+						     "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						     "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						     "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						     "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						     "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						     "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						     "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						     "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf1 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+
+			/*
+			 * This drive may have a temperature sensor with a
+			 * thermal zone we can use for thermal control of the
+			 * chassis temperature using the fan.
+			 */
+			drive0: ide-port@0 {
+				reg = <0>;
+				#thermal-sensor-cells = <0>;
+			};
+		};
+
+		display-controller@6a000000 {
+			status = "okay";
+
+			port {
+				display_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
new file mode 100644
index 0000000000000..138c47e1ac1b1
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	model = "D-Link DNS-313 1-Bay Network Storage Enclosure";
+	compatible = "dlink,dns-313", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait";
+		stdout-path = "uart0:19200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-esc {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "dns313:blue:power";
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-disk-blue {
+			label = "dns313:blue:disk";
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-disk-green {
+			label = "dns313:green:disk";
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-read";
+		};
+		led-disk-red {
+			label = "dns313:red:disk";
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-write";
+		};
+	};
+
+	/*
+	 * This is a ADDA AD0405GB-G73 fan @3000 and 6000 RPM.
+	 */
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+			<&gpio0 12 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>;
+		#cooling-cells = <2>;
+	};
+
+	/*
+	 * This is the type B USB connector on the device,
+	 * a GPIO-controlled USB VBUS detect
+	 */
+	usb1_phy: phy {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		#phy-cells = <0>;
+		vbus-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		g751: temperature-sensor@48 {
+			compatible = "gmt,g751";
+			reg = <0x48>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			/* Poll every 20 seconds */
+			polling-delay = <20000>;
+			/* Poll every 2nd second when cooling */
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&g751>;
+
+			/* Tripping points from the fan.script in the rootfs */
+			trips {
+				chassis_alert0: chassis-alert0 {
+					/* At 43 degrees turn on low speed */
+					temperature = <43000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				chassis_alert1: chassis-alert1 {
+					/* At 47 degrees turn on high speed */
+					temperature = <47000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				chassis_crit: chassis-crit {
+					/* Just shut down at 60 degrees */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&chassis_alert0>;
+					cooling-device = <&fan0 1 1>;
+				};
+				map1 {
+					trip = <&chassis_alert1>;
+					cooling-device = <&fan0 2 2>;
+				};
+			};
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Realtek RTL8211B Gigabit ethernet transceiver */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			/*
+			 * This is a Eon EN29LV400AB 512 KiB flash with
+			 * three partitions.
+			 */
+			compatible = "cortina,gemini-flash", "jedec-flash";
+			status = "okay";
+			reg = <0x30000000 0x00080000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/*
+			 * This "RedBoot" is the Storlink derivative.
+			 */
+			partition@0 {
+				label = "RedBoot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "MTD1";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition@60000 {
+				label = "MTD2";
+				reg = <0x00060000 0x00020000>;
+				read-only;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups =
+						/* Used by LEDs conflicts ICE */
+						"gpio0bgrp",
+						/* Used by ? conflicts ICE */
+						"gpio0cgrp",
+						/*
+						 * Used by fan & G751, conflicts LPC,
+						 * UART modem lines, SSP
+						 */
+						"gpio0egrp",
+						/* Used by G751 */
+						"gpio0fgrp",
+						/* Used by MDIO */
+						"gpio0igrp";
+					};
+				};
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						/* Used by "reset" button */
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					/*
+					 * In the vendor Linux tree, these values are set for the C3
+					 * version of the SL3512 ASIC with the comment "benson suggest"
+					 */
+					conf0 {
+						pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "T8 GMAC0 RXC";
+						skew-delay = <10>;
+					};
+					conf2 {
+						pins = "T11 GMAC1 RXC";
+						skew-delay = <15>;
+					};
+					conf3 {
+						pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf4 {
+						pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						/* The data lines all have default skew */
+						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
+						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
+						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
+						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
+						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
+						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					conf6 {
+						pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
+						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
+						skew-delay = <5>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf7 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			/* The ROM uses this muxmode */
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+			dr_mode = "peripheral";
+			usb-phy = <&usb1_phy>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_default_pins>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
new file mode 100644
index 0000000000000..6544c730340fa
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the Gemini-based Raidsonic NAS IB-4220-B
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Raidsonic NAS IB-4220-B";
+	compatible = "raidsonic,ib-4220-b", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "Backup button";
+			/* Conflict with TVC */
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+		};
+		button-restart {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "Softreset button";
+			/* Conflict with TVC */
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-orange-hdd {
+			label = "nas4220b:orange:hdd";
+			/* Conflict with TVC */
+			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led-green-os {
+			label = "nas4220b:green:os";
+			/* Conflict with TVC */
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 16MB of flash */
+			reg = <0x30000000 0x01000000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0xfe0000 */
+				fis-index-block = <0x7f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio1dgrp cover line 28-31 otherwise used
+				 * by TVC.
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					/* Settings come from OpenWRT, pins on SL3516 */
+					conf0 {
+						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
+						skew-delay = <15>;
+					};
+					conf2 {
+						pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf3 {
+						pins = "U8 GMAC0 TXC";
+						skew-delay = <11>;
+					};
+					conf4 {
+						pins = "V11 GMAC1 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						/* The data lines all have default skew */
+						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf6 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		ide@63400000 {
+			status = "okay";
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-ns2502.dts b/arch/arm/boot/dts/gemini/gemini-ns2502.dts
new file mode 100644
index 0000000000000..e6eeb35e88198
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-ns2502.dts
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for Edimax NS 2502
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "Edimax NS-2502";
+	compatible = "edimax,ns-2502", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii-id";
+		phy-handle = <&phy0>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 8MB of flash */
+	reg = <0x30000000 0x00800000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0x7e0000 */
+		fis-index-block = <0x3f>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <3>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			    mux {
+				    function = "gpio0";
+				    groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp";
+			    };
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp";
+				};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
new file mode 100644
index 0000000000000..0ebda4efd9d0f
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Teltonika RUT1xx
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Teltonika RUT1xx";
+	compatible = "teltonika,rut1xx", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "Reset to defaults";
+			/* Conflict with TVC */
+			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-gsm {
+			/* FIXME: add the LED color */
+			label = "rut1xx::gsm";
+			/* Conflict with ICE */
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led-power {
+			/* FIXME: add the LED color */
+			label = "rut1xx::power";
+			/* Conflict with NAND CE0 */
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+			/* TODO: add flash partitions here */
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0bgrp cover line 7 used by GSM LED
+				 * gpio0fgrp cover line 17 used by power LED
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0bgrp",
+						"gpio0fgrp";
+					};
+				};
+				/*
+				 * gpio1dgrp cover line 28-31 otherwise used
+				 * by TVC.
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
new file mode 100644
index 0000000000000..91c19e8ebfe8b
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the Storm Semiconductor SL93512R_BRD
+ * Gemini reference design, also initially called
+ * "Gemini324 EV-Board" before Storm acquired Storlink Semiconductor.
+ * The series were later acquired by Cortina Systems.
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Storlink Semiconductor Gemini324 EV-Board / Storm Semiconductor SL93512R_BRD";
+	compatible = "storlink,gemini324", "storm,sl93512r", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB Samsung K4H511638B */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_WPS_BUTTON>;
+			label = "WPS";
+			/* Conflicts with TVC and extended flash */
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-setup {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "factory reset";
+			/* Conflict with NAND flash */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green-harddisk {
+			label = "sq201:green:harddisk";
+			/* Conflict with LCD (no problem) */
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "disk-activity";
+		};
+		led-green-wireless {
+			label = "sq201:green:wireless";
+			/* Conflict with NAND flash CE0 (no problem) */
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Marvell 88E1111 ethernet transciever */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* Check pin collisions */
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		switch@0 {
+			compatible = "vitesse,vsc7385";
+			reg = <0>;
+			/* Specified for 2.5 MHz or below */
+			spi-max-frequency = <2500000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+				port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+				port@3 {
+					reg = <3>;
+					label = "lan4";
+				};
+				vsc: port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 16MB of flash */
+			reg = <0x30000000 0x01000000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0xfe0000 */
+				fis-index-block = <0x1fc>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0, used by WPS button
+				 * gpio0fgrp cover line 16 used by HD LED
+				 * gpio0ggrp cover line 17, 18 used by wireless LAN LED and
+				 * reset button OR USB ID select on 17 and USB VBUS select
+				 * on 18. (Confusing.)
+				 * gpio0igrp cover line 21, 22 used by MDIO for Marvell PHY
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0fgrp",
+						"gpio0ggrp",
+						"gpio0igrp";
+					};
+				};
+				/*
+				 * gpio1dgrp cover lines used by SPI for
+				 * the Vitesse chip (28-31)
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+					/* Control pad skew comes from sl_switch.c in the vendor code */
+					conf0 {
+						pins = "P10 GMAC1 TXC";
+						skew-delay = <5>;
+					};
+					conf1 {
+						pins = "V11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf2 {
+						pins = "T11 GMAC1 RXC";
+						skew-delay = <8>;
+					};
+					conf3 {
+						pins = "U11 GMAC1 RXDV";
+						skew-delay = <7>;
+					};
+					conf4 {
+						pins = "V7 GMAC0 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						pins = "P8 GMAC0 TXEN";
+						skew-delay = <7>; /* 5 at another place? */
+					};
+					conf6 {
+						pins = "T8 GMAC0 RXC";
+						skew-delay = <15>;
+					};
+					conf7 {
+						pins = "R8 GMAC0 RXDV";
+						skew-delay = <0>;
+					};
+					conf8 {
+						/* The data lines all have default skew */
+						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
+						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
+						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
+						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
+						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
+						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Appears in sl351x_gmac.c in the vendor code */
+					conf9 {
+						pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
+						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
+						skew-delay = <5>;
+					};
+				};
+			};
+		};
+
+		/* Both interfaces brought out on SATA connectors */
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		ide@63400000 {
+			status = "okay";
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-sq201.dts b/arch/arm/boot/dts/gemini/gemini-sq201.dts
new file mode 100644
index 0000000000000..d0efd76695da6
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for ITian Square One SQ201 NAS
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ITian Square One SQ201";
+	compatible = "itian,sq201", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "factory reset";
+			/* Conflict with NAND flash */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green-info {
+			label = "sq201:green:info";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-green-usb {
+			label = "sq201:green:usb";
+			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "usb-host";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Marvell 88E1111 ethernet transciever */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* Check pin collisions */
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		switch@0 {
+			compatible = "vitesse,vsc7395";
+			reg = <0>;
+			/* Specified for 2.5 MHz or below */
+			spi-max-frequency = <2500000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+				port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+				port@3 {
+					reg = <3>;
+					label = "lan4";
+				};
+				vsc: port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			pinctrl-names = "enabled", "disabled";
+			pinctrl-0 = <&pflash_default_pins>;
+			pinctrl-1 = <&pflash_disabled_pins>;
+			/* 16MB of flash */
+			reg = <0x30000000 0x01000000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0xfe0000 */
+				fis-index-block = <0x1fc>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0fgrp cover line 18 used by reset button
+				 * gpio0ggrp cover line 20 used by info LED
+				 * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY
+				 * gpio0kgrp cover line 31 used by USB LED
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0fgrp",
+						"gpio0hgrp";
+					};
+				};
+				/*
+				 * gpio0dgrp cover lines used by the SPI
+				 * to the Vitesse G5x chip.
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				/*
+				 * These GPIO groups will be mapped in over some
+				 * of the flash pins when the flash is not in
+				 * active use.
+				 */
+				pflash_disabled_pins: pinctrl-pflash-disabled {
+					mux {
+						function = "gpio0";
+						groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+							 "gpio0kgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+					/* Settings come from memory dump in PLATO */
+					conf0 {
+						pins = "V8 GMAC0 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "Y7 GMAC0 RXC";
+						skew-delay = <15>;
+					};
+					conf2 {
+						pins = "T8 GMAC0 TXEN";
+						skew-delay = <7>;
+					};
+					conf3 {
+						pins = "U8 GMAC0 TXC";
+						skew-delay = <10>;
+					};
+					conf4 {
+						pins = "T10 GMAC1 RXDV";
+						skew-delay = <7>;
+					};
+					conf5 {
+						pins = "Y11 GMAC1 RXC";
+						skew-delay = <8>;
+					};
+					conf6 {
+						pins = "W11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf7 {
+						pins = "V11 GMAC1 TXC";
+						skew-delay = <5>;
+					};
+					conf8 {
+						/* The data lines all have default skew */
+						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 and GMAC1 to 16 mA */
+					conf9 {
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini/gemini-ssi1328.dts
new file mode 100644
index 0000000000000..42e85f07cf764
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-ssi1328.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for SSI 1328
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "SSI 1328";
+	compatible = "ssi,1328", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LAN Marvell 88E1118 */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+		/* WAN ICPlus IP101A */
+		phy1: ethernet-phy@2 {
+			reg = <2>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy0>;
+	};
+	ethernet-port@1 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy1>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 32MB of flash */
+	reg = <0x30000000 0x03200000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0xfe0000 */
+		fis-index-block = <0x7F>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <0>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			mux {
+				function = "gpio0";
+				groups = "gpio0agrp", "gpio0bgrp";
+			};
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			/* This platform use both the ethernet ports */
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-wbd111.dts b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
new file mode 100644
index 0000000000000..3c88c59ab481c
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Wiliboard WBD-111
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wiliboard WBD-111";
+	compatible = "wiliboard,wbd111", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "reset";
+			/* Conflict with ICE */
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red-l3 {
+			label = "wbd111:red:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l4 {
+			label = "wbd111:green:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-red-l4 {
+			label = "wbd111:red:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-greeb-l3 {
+			label = "wbd111:green:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0-4
+				 * gpio0bgrp cover line 5
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0bgrp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-wbd222.dts b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
new file mode 100644
index 0000000000000..ff72bbc4db3e2
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Wiliboard WBD-222
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wiliboard WBD-222";
+	compatible = "wiliboard,wbd222", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "reset";
+			/* Conflict with ICE */
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red-l3 {
+			label = "wbd111:red:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l4 {
+			label = "wbd111:green:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-red-l4 {
+			label = "wbd111:red:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l3 {
+			label = "wbd111:green:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+
+		phy1: ethernet-phy@3 {
+			reg = <3>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0-4
+				 * gpio0bgrp cover line 5
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0bgrp";
+					};
+				};
+				pinctrl-gmii {
+					/* This platform use both the ethernet ports */
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy1>;
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini.dtsi b/arch/arm/boot/dts/gemini/gemini.dtsi
new file mode 100644
index 0000000000000..befe322bd7de9
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini.dtsi
@@ -0,0 +1,475 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Cortina systems Gemini SoC
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/cortina,gemini-clock.h>
+#include <dt-bindings/reset/cortina,gemini-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&intcon>;
+
+		flash: flash@30000000 {
+			compatible = "cortina,gemini-flash", "cfi-flash";
+			syscon = <&syscon>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pflash_default_pins>;
+			bank-width = <2>;
+			status = "disabled";
+		};
+
+		syscon: syscon@40000000 {
+			compatible = "cortina,gemini-syscon",
+				     "syscon", "simple-mfd";
+			reg = <0x40000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&syscon>;
+				/* GLOBAL_RESET register */
+				offset = <0x0c>;
+				/* RESET_GLOBAL | RESET_CPU1 */
+				mask = <0xC0000000>;
+			};
+
+			pinctrl {
+				compatible = "cortina,gemini-pinctrl";
+				regmap = <&syscon>;
+				/* Hog the DRAM pins */
+				pinctrl-names = "default";
+				pinctrl-0 = <&dram_default_pins>, <&system_default_pins>,
+					    <&vcontrol_default_pins>;
+
+				dram_default_pins: pinctrl-dram {
+					mux {
+						function = "dram";
+						groups = "dramgrp";
+					};
+				};
+				rtc_default_pins: pinctrl-rtc {
+					mux {
+						function = "rtc";
+						groups = "rtcgrp";
+					};
+				};
+				power_default_pins: pinctrl-power {
+					mux {
+						function = "power";
+						groups = "powergrp";
+					};
+				};
+				cir_default_pins: pinctrl-cir {
+					mux {
+						function = "cir";
+						groups = "cirgrp";
+					};
+				};
+				system_default_pins: pinctrl-system {
+					mux {
+						function = "system";
+						groups = "systemgrp";
+					};
+				};
+				vcontrol_default_pins: pinctrl-vcontrol {
+					mux {
+						function = "vcontrol";
+						groups = "vcontrolgrp";
+					};
+				};
+				ice_default_pins: pinctrl-ice {
+					mux {
+						function = "ice";
+						groups = "icegrp";
+					};
+				};
+				uart_default_pins: pinctrl-uart {
+					mux {
+						function = "uart";
+						groups = "uartrxtxgrp";
+					};
+				};
+				pflash_default_pins: pinctrl-pflash {
+					mux {
+						function = "pflash";
+						groups = "pflashgrp";
+					};
+				};
+				usb_default_pins: pinctrl-usb {
+					mux {
+						function = "usb";
+						groups = "usbgrp";
+					};
+				};
+				gmii_default_pins: pinctrl-gmii {
+					/*
+					 * Only activate GMAC0 by default since
+					 * GMAC1 will overlap with 8 GPIO lines
+					 * gpio2a, gpio2b. Overlay groups with
+					 * "gmii_gmac0_grp", "gmii_gmac1_grp" for
+					 * both ethernet interfaces.
+					 */
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+				};
+				pci_default_pins: pinctrl-pci {
+					mux {
+						function = "pci";
+						groups = "pcigrp";
+					};
+				};
+				sata_default_pins: pinctrl-sata {
+					mux {
+						function = "sata";
+						groups = "satagrp";
+					};
+				};
+				/* Activate both groups of pins for this state */
+				sata_and_ide_pins: pinctrl-sata-ide {
+					mux0 {
+						function = "sata";
+						groups = "satagrp";
+					};
+					mux1 {
+						function = "ide";
+						groups = "idegrp";
+					};
+				};
+				tvc_default_pins: pinctrl-tvc {
+					mux {
+						function = "tvc";
+						groups = "tvcgrp";
+					};
+				};
+			};
+		};
+
+		watchdog@41000000 {
+			compatible = "cortina,gemini-watchdog", "faraday,ftwdt010";
+			reg = <0x41000000 0x1000>;
+			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_WDOG>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			clock-names = "PCLK";
+		};
+
+		uart0: serial@42000000 {
+			compatible = "ns16550a";
+			reg = <0x42000000 0x100>;
+			resets = <&syscon GEMINI_RESET_UART>;
+			clocks = <&syscon GEMINI_CLK_UART>;
+			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart_default_pins>;
+			reg-shift = <2>;
+		};
+
+		timer@43000000 {
+			compatible = "faraday,fttmr010";
+			reg = <0x43000000 0x1000>;
+			interrupt-parent = <&intcon>;
+			interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
+				     <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
+				     <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
+			resets = <&syscon GEMINI_RESET_TIMER>;
+			/* APB clock or RTC clock */
+			clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
+			clock-names = "PCLK", "EXTCLK";
+			syscon = <&syscon>;
+		};
+
+		rtc@45000000 {
+			compatible = "cortina,gemini-rtc", "faraday,ftrtc010";
+			reg = <0x45000000 0x100>;
+			interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_RTC>;
+			clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
+			clock-names = "PCLK", "EXTCLK";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rtc_default_pins>;
+		};
+
+		sata: sata@46000000 {
+			compatible = "cortina,gemini-sata-bridge";
+			reg = <0x46000000 0x100>;
+			resets = <&syscon GEMINI_RESET_SATA0>,
+				 <&syscon GEMINI_RESET_SATA1>;
+			reset-names = "sata0", "sata1";
+			clocks = <&syscon GEMINI_CLK_GATE_SATA0>,
+				 <&syscon GEMINI_CLK_GATE_SATA1>;
+			clock-names = "SATA0_PCLK", "SATA1_PCLK";
+			/*
+			 * This defines the special "ide" state that needs
+			 * to be explicitly enabled to enable the IDE pins,
+			 * as these pins are normally used for other things.
+			 */
+			pinctrl-names = "default", "ide";
+			pinctrl-0 = <&sata_default_pins>;
+			pinctrl-1 = <&sata_and_ide_pins>;
+			syscon = <&syscon>;
+			status = "disabled";
+		};
+
+		intcon: interrupt-controller@48000000 {
+			compatible = "faraday,ftintc010";
+			reg = <0x48000000 0x1000>;
+			resets = <&syscon GEMINI_RESET_INTCON0>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		power-controller@4b000000 {
+			compatible = "cortina,gemini-power-controller";
+			reg = <0x4b000000 0x100>;
+			interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_default_pins>;
+		};
+
+		gpio0: gpio@4d000000 {
+			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+			reg = <0x4d000000 0x100>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_GPIO0>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@4e000000 {
+			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+			reg = <0x4e000000 0x100>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_GPIO1>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@4f000000 {
+			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+			reg = <0x4f000000 0x100>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_GPIO2>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pci@50000000 {
+			compatible = "cortina,gemini-pci", "faraday,ftpci100";
+			/*
+			 * The first 256 bytes in the IO range is actually used
+			 * to configure the host bridge.
+			 */
+			reg = <0x50000000 0x100>;
+			resets = <&syscon GEMINI_RESET_PCI>;
+			clocks = <&syscon GEMINI_CLK_GATE_PCI>, <&syscon GEMINI_CLK_PCI>;
+			clock-names = "PCLK", "PCICLK";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pci_default_pins>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+				<0x4800 0 0 2 &pci_intc 1>,
+				<0x4800 0 0 3 &pci_intc 2>,
+				<0x4800 0 0 4 &pci_intc 3>,
+				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+				<0x5000 0 0 2 &pci_intc 2>,
+				<0x5000 0 0 3 &pci_intc 3>,
+				<0x5000 0 0 4 &pci_intc 0>,
+				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+				<0x5800 0 0 2 &pci_intc 3>,
+				<0x5800 0 0 3 &pci_intc 0>,
+				<0x5800 0 0 4 &pci_intc 1>,
+				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+				<0x6000 0 0 2 &pci_intc 0>,
+				<0x6000 0 0 3 &pci_intc 1>,
+				<0x6000 0 0 4 &pci_intc 2>;
+
+			bus-range = <0x00 0xff>;
+			/* PCI ranges mappings */
+			ranges =
+			/* 1MiB I/O space 0x50000000-0x500fffff */
+			<0x01000000 0 0          0x50000000 0 0x00100000>,
+			/* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+			<0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+
+			/* DMA ranges */
+			dma-ranges =
+			/* 128MiB at 0x00000000-0x07ffffff */
+			<0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
+			/* 64MiB at 0x00000000-0x03ffffff */
+			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
+			/* 64MiB at 0x00000000-0x03ffffff */
+			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+			/*
+			 * This PCI host bridge variant has a cascaded interrupt
+			 * controller embedded in the host bridge.
+			 */
+			pci_intc: interrupt-controller {
+				interrupt-parent = <&intcon>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		ethernet: ethernet@60000000 {
+			compatible = "cortina,gemini-ethernet";
+			reg = <0x60000000 0x4000>, /* Global registers, queue */
+			      <0x60004000 0x2000>, /* V-bit */
+			      <0x60006000 0x2000>; /* A-bit */
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmii_default_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gmac0: ethernet-port@0 {
+				compatible = "cortina,gemini-ethernet-port";
+				reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+				      <0x6000a000 0x2000>; /* Port 0 GMAC */
+				interrupt-parent = <&intcon>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&syscon GEMINI_RESET_GMAC0>;
+				clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+				clock-names = "PCLK";
+			};
+
+			gmac1: ethernet-port@1 {
+				compatible = "cortina,gemini-ethernet-port";
+				reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+				      <0x6000e000 0x2000>; /* Port 1 GMAC */
+				interrupt-parent = <&intcon>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&syscon GEMINI_RESET_GMAC1>;
+				clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+				clock-names = "PCLK";
+			};
+		};
+
+		crypto: crypto@62000000 {
+			compatible = "cortina,sl3516-crypto";
+			reg = <0x62000000 0x10000>;
+			interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_SECURITY>;
+			clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
+		};
+
+		ide0: ide@63000000 {
+			compatible = "cortina,gemini-pata", "faraday,ftide010";
+			reg = <0x63000000 0x1000>;
+			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_IDE>;
+			clocks = <&syscon GEMINI_CLK_GATE_IDE>;
+			clock-names = "PCLK";
+			sata = <&sata>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ide1: ide@63400000 {
+			compatible = "cortina,gemini-pata", "faraday,ftide010";
+			reg = <0x63400000 0x1000>;
+			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_IDE>;
+			clocks = <&syscon GEMINI_CLK_GATE_IDE>;
+			clock-names = "PCLK";
+			sata = <&sata>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		dma-controller@67000000 {
+			compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell";
+			/* Faraday Technology FTDMAC020 variant */
+			arm,primecell-periphid = <0x0003b080>;
+			reg = <0x67000000 0x1000>;
+			interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_DMAC>;
+			clocks = <&syscon GEMINI_CLK_AHB>;
+			clock-names = "apb_pclk";
+			/* Bus interface AHB1 (AHB0) is totally tilted */
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			#dma-cells = <2>;
+		};
+
+		display-controller@6a000000 {
+			compatible = "cortina,gemini-tvc", "faraday,tve200";
+			reg = <0x6a000000 0x1000>;
+			interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_TVC>;
+			clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+				 <&syscon GEMINI_CLK_TVC>;
+			clock-names = "PCLK", "TVE";
+			pinctrl-names = "default";
+			pinctrl-0 = <&tvc_default_pins>;
+			status = "disabled";
+		};
+
+		usb0: usb@68000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
+			reg = <0x68000000 0x1000>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_USB0>;
+			clocks = <&syscon GEMINI_CLK_GATE_USB0>;
+			clock-names = "PCLK";
+			/*
+			 * This will claim pins for USB0 and USB1 at the same
+			 * time as they are using some common pins. If you for
+			 * some reason have a system using USB1 at 96000000 but
+			 * NOT using USB0 at 68000000 you wll have to add the
+			 * usb_default_pins to the USB controller at 96000000
+			 * in your .dts for the board.
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_default_pins>;
+			/* Default to host mode */
+			dr_mode = "host";
+			syscon = <&syscon>;
+			status = "disabled";
+		};
+
+		usb1: usb@69000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
+			reg = <0x69000000 0x1000>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_USB1>;
+			clocks = <&syscon GEMINI_CLK_GATE_USB1>;
+			clock-names = "PCLK";
+			syscon = <&syscon>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi
deleted file mode 100644
index 8d77579807ecf..0000000000000
--- a/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the GR-Peach audiocamera shield expansion board
- *
- * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
- */
-
-#include "r7s72100.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
-
-/ {
-	/* On-board camera clock. */
-	camera_clk: camera_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <27000000>;
-	};
-};
-
-&pinctrl {
-	i2c1_pins: i2c1 {
-		/* P1_2 as SCL; P1_3 as SDA */
-		pinmux = <RZA1_PINMUX(1, 2, 1)>, <RZA1_PINMUX(1, 3, 1)>;
-	};
-
-	vio_pins: vio {
-		/* CEU pins: VIO_D[0-10], VIO_VD, VIO_HD, VIO_CLK */
-		pinmux = <RZA1_PINMUX(1, 0, 5)>, /* VIO_VD */
-			 <RZA1_PINMUX(1, 1, 5)>, /* VIO_HD */
-			 <RZA1_PINMUX(2, 0, 7)>, /* VIO_D0 */
-			 <RZA1_PINMUX(2, 1, 7)>, /* VIO_D1 */
-			 <RZA1_PINMUX(2, 2, 7)>, /* VIO_D2 */
-			 <RZA1_PINMUX(2, 3, 7)>, /* VIO_D3 */
-			 <RZA1_PINMUX(2, 4, 7)>, /* VIO_D4 */
-			 <RZA1_PINMUX(2, 5, 7)>, /* VIO_D5 */
-			 <RZA1_PINMUX(2, 6, 7)>, /* VIO_D6 */
-			 <RZA1_PINMUX(2, 7, 7)>, /* VIO_D7 */
-			 <RZA1_PINMUX(10, 0, 6)>; /* VIO_CLK */
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <100000>;
-
-	camera@48 {
-		compatible = "aptina,mt9v111";
-		reg = <0x48>;
-
-		clocks = <&camera_clk>;
-
-		port {
-			mt9v111_out: endpoint {
-				remote-endpoint = <&ceu_in>;
-			};
-		};
-	};
-};
-
-&ceu {
-	pinctrl-names = "default";
-	pinctrl-0 = <&vio_pins>;
-
-	status = "okay";
-
-	port {
-		ceu_in: endpoint {
-			remote-endpoint = <&mt9v111_out>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts
deleted file mode 100644
index f473fa22e9ce5..0000000000000
--- a/arch/arm/boot/dts/hi3519-demb.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
- */
-
-/dts-v1/;
-#include "hi3519.dtsi"
-
-/ {
-	model = "HiSilicon HI3519 DEMO Board";
-	compatible = "hisilicon,hi3519";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&dual_timer0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
deleted file mode 100644
index c524c854d3192..0000000000000
--- a/arch/arm/boot/dts/hi3519.dtsi
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
- */
-
-#include <dt-bindings/clock/hi3519-clock.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-		};
-	};
-
-	gic: interrupt-controller@10300000 {
-		compatible = "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
-	};
-
-	clk_3m: clk_3m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <3000000>;
-	};
-
-	crg: clock-reset-controller@12010000 {
-		compatible = "hisilicon,hi3519-crg";
-		#clock-cells = <1>;
-		#reset-cells = <2>;
-		reg = <0x12010000 0x10000>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		uart0: serial@12100000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12100000 0x1000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
-		};
-
-		uart1: serial@12101000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12101000 0x1000>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
-		};
-
-		uart2: serial@12102000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12102000 0x1000>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
-		};
-
-		uart3: serial@12103000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12103000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
-		};
-
-		uart4: serial@12104000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12104000 0x1000>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
-		};
-
-		dual_timer0: timer@12000000 {
-			compatible = "arm,sp804", "arm,primecell";
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x12000000 0x1000>;
-			clocks = <&clk_3m>;
-			clock-names = "apb_pclk";
-			status = "disable";
-		};
-
-		dual_timer1: timer@12001000 {
-			compatible = "arm,sp804", "arm,primecell";
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x12001000 0x1000>;
-			clocks = <&clk_3m>;
-			clock-names = "apb_pclk";
-			status = "disable";
-		};
-
-		dual_timer2: timer@12002000 {
-			compatible = "arm,sp804", "arm,primecell";
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x12002000 0x1000>;
-			clocks = <&clk_3m>;
-			clock-names = "apb_pclk";
-			status = "disable";
-		};
-
-		spi_bus0: spi@12120000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x12120000 0x1000>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_SPI0_CLK>, <&crg HI3519_SPI0_CLK>;
-			clock-names = "sspclk", "apb_pclk";
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disable";
-		};
-
-		spi_bus1: spi@12121000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x12121000 0x1000>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_SPI1_CLK>, <&crg HI3519_SPI1_CLK>;
-			clock-names = "sspclk", "apb_pclk";
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disable";
-		};
-
-		spi_bus2: spi@12122000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x12122000 0x1000>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_SPI2_CLK>, <&crg HI3519_SPI2_CLK>;
-			clock-names = "sspclk", "apb_pclk";
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disable";
-		};
-
-		sysctrl: system-controller@12020000 {
-			compatible = "hisilicon,hi3519-sysctrl", "syscon";
-			reg = <0x12020000 0x1000>;
-		};
-
-		reboot {
-			compatible = "syscon-reboot";
-			regmap = <&sysctrl>;
-			offset = <0x4>;
-			mask = <0xdeadbeef>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
deleted file mode 100644
index d7f5daecc9dc8..0000000000000
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ /dev/null
@@ -1,647 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2012-2013 Linaro Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- */
-
-/dts-v1/;
-
-#include "hi3620.dtsi"
-
-/ {
-	model = "Hisilicon Hi4511 Development Board";
-	compatible = "hisilicon,hi3620-hi4511";
-
-	chosen {
-		bootargs = "root=/dev/ram0";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-
-	amba-bus {
-		dual_timer0: dual_timer@800000 {
-			status = "okay";
-		};
-
-		uart0: serial@b00000 {	/* console */
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
-			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
-			status = "okay";
-		};
-
-		uart1: serial@b01000 { /* modem */
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
-			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
-			status = "okay";
-		};
-
-		uart2: serial@b02000 { /* audience */
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
-			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
-			status = "okay";
-		};
-
-		uart3: serial@b03000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
-			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
-			status = "okay";
-		};
-
-		uart4: serial@b04000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
-			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
-			status = "okay";
-		};
-
-		pmx0: pinmux@803000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&board_pmx_pins>;
-
-			board_pmx_pins: board_pmx_pins {
-				pinctrl-single,pins = <
-					0x008 0x0	/* GPIO -- eFUSE_DOUT */
-					0x100 0x0	/* USIM_CLK & USIM_DATA (IOMG63) */
-				>;
-			};
-			uart0_pmx_func: uart0_pmx_func {
-				pinctrl-single,pins = <
-					0x0f0 0x0
-					0x0f4 0x0	/* UART0_RX & UART0_TX */
-				>;
-			};
-			uart0_pmx_idle: uart0_pmx_idle {
-				pinctrl-single,pins = <
-					/*0x0f0 0x1*/	/* UART0_CTS & UART0_RTS */
-					0x0f4 0x1	/* UART0_RX & UART0_TX */
-				>;
-			};
-			uart1_pmx_func: uart1_pmx_func {
-				pinctrl-single,pins = <
-					0x0f8 0x0	/* UART1_CTS & UART1_RTS (IOMG61) */
-					0x0fc 0x0	/* UART1_RX & UART1_TX (IOMG62) */
-				>;
-			};
-			uart1_pmx_idle: uart1_pmx_idle {
-				pinctrl-single,pins = <
-					0x0f8 0x1	/* GPIO (IOMG61) */
-					0x0fc 0x1	/* GPIO (IOMG62) */
-				>;
-			};
-			uart2_pmx_func: uart2_pmx_func {
-				pinctrl-single,pins = <
-					0x104 0x2	/* UART2_RXD (IOMG96) */
-					0x108 0x2	/* UART2_TXD (IOMG64) */
-				>;
-			};
-			uart2_pmx_idle: uart2_pmx_idle {
-				pinctrl-single,pins = <
-					0x104 0x1	/* GPIO (IOMG96) */
-					0x108 0x1	/* GPIO (IOMG64) */
-				>;
-			};
-			uart3_pmx_func: uart3_pmx_func {
-				pinctrl-single,pins = <
-					0x160 0x2	/* UART3_CTS & UART3_RTS (IOMG85) */
-					0x164 0x2	/* UART3_RXD & UART3_TXD (IOMG86) */
-				>;
-			};
-			uart3_pmx_idle: uart3_pmx_idle {
-				pinctrl-single,pins = <
-					0x160 0x1	/* GPIO (IOMG85) */
-					0x164 0x1	/* GPIO (IOMG86) */
-				>;
-			};
-			uart4_pmx_func: uart4_pmx_func {
-				pinctrl-single,pins = <
-					0x168 0x0	/* UART4_CTS & UART4_RTS (IOMG87) */
-					0x16c 0x0	/* UART4_RXD (IOMG88) */
-					0x170 0x0	/* UART4_TXD (IOMG93) */
-				>;
-			};
-			uart4_pmx_idle: uart4_pmx_idle {
-				pinctrl-single,pins = <
-					0x168 0x1	/* GPIO (IOMG87) */
-					0x16c 0x1	/* GPIO (IOMG88) */
-					0x170 0x1	/* GPIO (IOMG93) */
-				>;
-			};
-			i2c0_pmx_func: i2c0_pmx_func {
-				pinctrl-single,pins = <
-					0x0b4 0x0	/* I2C0_SCL & I2C0_SDA (IOMG45) */
-				>;
-			};
-			i2c0_pmx_idle: i2c0_pmx_idle {
-				pinctrl-single,pins = <
-					0x0b4 0x1	/* GPIO (IOMG45) */
-				>;
-			};
-			i2c1_pmx_func: i2c1_pmx_func {
-				pinctrl-single,pins = <
-					0x0b8 0x0	/* I2C1_SCL & I2C1_SDA (IOMG46) */
-				>;
-			};
-			i2c1_pmx_idle: i2c1_pmx_idle {
-				pinctrl-single,pins = <
-					0x0b8 0x1	/* GPIO (IOMG46) */
-				>;
-			};
-			i2c2_pmx_func: i2c2_pmx_func {
-				pinctrl-single,pins = <
-					0x068 0x0	/* I2C2_SCL (IOMG26) */
-					0x06c 0x0	/* I2C2_SDA (IOMG27) */
-				>;
-			};
-			i2c2_pmx_idle: i2c2_pmx_idle {
-				pinctrl-single,pins = <
-					0x068 0x1	/* GPIO (IOMG26) */
-					0x06c 0x1	/* GPIO (IOMG27) */
-				>;
-			};
-			i2c3_pmx_func: i2c3_pmx_func {
-				pinctrl-single,pins = <
-					0x050 0x2	/* I2C3_SCL (IOMG20) */
-					0x054 0x2	/* I2C3_SDA (IOMG21) */
-				>;
-			};
-			i2c3_pmx_idle: i2c3_pmx_idle {
-				pinctrl-single,pins = <
-					0x050 0x1	/* GPIO (IOMG20) */
-					0x054 0x1	/* GPIO (IOMG21) */
-				>;
-			};
-			spi0_pmx_func: spi0_pmx_func {
-				pinctrl-single,pins = <
-					0x0d4 0x0	/* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
-					0x0d8 0x0	/* SPI0_CS0 (IOMG54) */
-					0x0dc 0x0	/* SPI0_CS1 (IOMG55) */
-					0x0e0 0x0	/* SPI0_CS2 (IOMG56) */
-					0x0e4 0x0	/* SPI0_CS3 (IOMG57) */
-				>;
-			};
-			spi0_pmx_idle: spi0_pmx_idle {
-				pinctrl-single,pins = <
-					0x0d4 0x1	/* GPIO (IOMG53) */
-					0x0d8 0x1	/* GPIO (IOMG54) */
-					0x0dc 0x1	/* GPIO (IOMG55) */
-					0x0e0 0x1	/* GPIO (IOMG56) */
-					0x0e4 0x1	/* GPIO (IOMG57) */
-				>;
-			};
-			spi1_pmx_func: spi1_pmx_func {
-				pinctrl-single,pins = <
-					0x184 0x0	/* SPI1_CLK/SPI1_DI (IOMG98) */
-					0x0e8 0x0	/* SPI1_DO (IOMG58) */
-					0x0ec 0x0	/* SPI1_CS (IOMG95) */
-				>;
-			};
-			spi1_pmx_idle: spi1_pmx_idle {
-				pinctrl-single,pins = <
-					0x184 0x1	/* GPIO (IOMG98) */
-					0x0e8 0x1	/* GPIO (IOMG58) */
-					0x0ec 0x1	/* GPIO (IOMG95) */
-				>;
-			};
-			kpc_pmx_func: kpc_pmx_func {
-				pinctrl-single,pins = <
-					0x12c 0x0	/* KEY_IN0 (IOMG73) */
-					0x130 0x0	/* KEY_IN1 (IOMG74) */
-					0x134 0x0	/* KEY_IN2 (IOMG75) */
-					0x10c 0x0	/* KEY_OUT0 (IOMG65) */
-					0x110 0x0	/* KEY_OUT1 (IOMG66) */
-					0x114 0x0	/* KEY_OUT2 (IOMG67) */
-				>;
-			};
-			kpc_pmx_idle: kpc_pmx_idle {
-				pinctrl-single,pins = <
-					0x12c 0x1	/* GPIO (IOMG73) */
-					0x130 0x1	/* GPIO (IOMG74) */
-					0x134 0x1	/* GPIO (IOMG75) */
-					0x10c 0x1	/* GPIO (IOMG65) */
-					0x110 0x1	/* GPIO (IOMG66) */
-					0x114 0x1	/* GPIO (IOMG67) */
-				>;
-			};
-			gpio_key_func: gpio_key_func {
-				pinctrl-single,pins = <
-					0x10c 0x1	/* KEY_OUT0/GPIO (IOMG65) */
-					0x130 0x1	/* KEY_IN1/GPIO (IOMG74) */
-				>;
-			};
-			emmc_pmx_func: emmc_pmx_func {
-				pinctrl-single,pins = <
-					0x030 0x2	/* eMMC_CMD/eMMC_CLK (IOMG12) */
-					0x018 0x0	/* NAND_CS3_N (IOMG6) */
-					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
-					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
-					0x02c 0x2	/* eMMC_DATA[0:7] (IOMG10) */
-				>;
-			};
-			emmc_pmx_idle: emmc_pmx_idle {
-				pinctrl-single,pins = <
-					0x030 0x0	/* GPIO (IOMG12) */
-					0x018 0x1	/* GPIO (IOMG6) */
-					0x024 0x1	/* GPIO (IOMG8) */
-					0x028 0x1	/* GPIO (IOMG9) */
-					0x02c 0x1	/* GPIO (IOMG10) */
-				>;
-			};
-			sd_pmx_func: sd_pmx_func {
-				pinctrl-single,pins = <
-					0x0bc 0x0	/* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
-					0x0c0 0x0	/* SD_DATA3 (IOMG48) */
-				>;
-			};
-			sd_pmx_idle: sd_pmx_idle {
-				pinctrl-single,pins = <
-					0x0bc 0x1	/* GPIO (IOMG47) */
-					0x0c0 0x1	/* GPIO (IOMG48) */
-				>;
-			};
-			nand_pmx_func: nand_pmx_func {
-				pinctrl-single,pins = <
-					0x00c 0x0	/* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
-					0x010 0x0	/* NAND_CS1_N (IOMG4) */
-					0x014 0x0	/* NAND_CS2_N (IOMG5) */
-					0x018 0x0	/* NAND_CS3_N (IOMG6) */
-					0x01c 0x0	/* NAND_BUSY0_N (IOMG94) */
-					0x020 0x0	/* NAND_BUSY1_N (IOMG7) */
-					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
-					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
-					0x02c 0x0	/* NAND_DATA[8:15] (IOMG10) */
-				>;
-			};
-			nand_pmx_idle: nand_pmx_idle {
-				pinctrl-single,pins = <
-					0x00c 0x1	/* GPIO (IOMG3) */
-					0x010 0x1	/* GPIO (IOMG4) */
-					0x014 0x1	/* GPIO (IOMG5) */
-					0x018 0x1	/* GPIO (IOMG6) */
-					0x01c 0x1	/* GPIO (IOMG94) */
-					0x020 0x1	/* GPIO (IOMG7) */
-					0x024 0x1	/* GPIO (IOMG8) */
-					0x028 0x1	/* GPIO (IOMG9) */
-					0x02c 0x1	/* GPIO (IOMG10) */
-				>;
-			};
-			sdio_pmx_func: sdio_pmx_func {
-				pinctrl-single,pins = <
-					0x0c4 0x0	/* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
-				>;
-			};
-			sdio_pmx_idle: sdio_pmx_idle {
-				pinctrl-single,pins = <
-					0x0c4 0x1	/* GPIO (IOMG49) */
-				>;
-			};
-			audio_out_pmx_func: audio_out_pmx_func {
-				pinctrl-single,pins = <
-					0x0f0 0x1	/* GPIO (IOMG59), audio spk & earphone */
-				>;
-			};
-		};
-
-		pmx1: pinmux@803800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <	&board_pu_pins &board_pd_pins &board_pd_ps_pins
-					&board_np_pins &board_ps_pins &kpc_cfg_func
-					&audio_out_cfg_func>;
-			board_pu_pins: board_pu_pins {
-				pinctrl-single,pins = <
-					0x014 0		/* GPIO_158 (IOCFG2) */
-					0x018 0		/* GPIO_159 (IOCFG3) */
-					0x01c 0		/* BOOT_MODE0 (IOCFG4) */
-					0x020 0		/* BOOT_MODE1 (IOCFG5) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-			};
-			board_pd_pins: board_pd_pins {
-				pinctrl-single,pins = <
-					0x038 0		/* eFUSE_DOUT (IOCFG11) */
-					0x150 0		/* ISP_GPIO8 (IOCFG93) */
-					0x154 0		/* ISP_GPIO9 (IOCFG94) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			board_pd_ps_pins: board_pd_ps_pins {
-				pinctrl-single,pins = <
-					0x2d8 0		/* CLK_OUT0 (IOCFG190) */
-					0x004 0		/* PMU_SPI_DATA (IOCFG192) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			board_np_pins: board_np_pins {
-				pinctrl-single,pins = <
-					0x24c 0		/* KEYPAD_OUT7 (IOCFG155) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			board_ps_pins: board_ps_pins {
-				pinctrl-single,pins = <
-					0x000 0		/* PMU_SPI_CLK (IOCFG191) */
-					0x008 0		/* PMU_SPI_CS_N (IOCFG193) */
-				>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			uart0_cfg_func: uart0_cfg_func {
-				pinctrl-single,pins = <
-					0x208 0		/* UART0_RXD (IOCFG138) */
-					0x20c 0		/* UART0_TXD (IOCFG139) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart0_cfg_idle: uart0_cfg_idle {
-				pinctrl-single,pins = <
-					0x208 0		/* UART0_RXD (IOCFG138) */
-					0x20c 0		/* UART0_TXD (IOCFG139) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart1_cfg_func: uart1_cfg_func {
-				pinctrl-single,pins = <
-					0x210 0		/* UART1_CTS (IOCFG140) */
-					0x214 0		/* UART1_RTS (IOCFG141) */
-					0x218 0		/* UART1_RXD (IOCFG142) */
-					0x21c 0		/* UART1_TXD (IOCFG143) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart1_cfg_idle: uart1_cfg_idle {
-				pinctrl-single,pins = <
-					0x210 0		/* UART1_CTS (IOCFG140) */
-					0x214 0		/* UART1_RTS (IOCFG141) */
-					0x218 0		/* UART1_RXD (IOCFG142) */
-					0x21c 0		/* UART1_TXD (IOCFG143) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart2_cfg_func: uart2_cfg_func {
-				pinctrl-single,pins = <
-					0x220 0		/* UART2_CTS (IOCFG144) */
-					0x224 0		/* UART2_RTS (IOCFG145) */
-					0x228 0		/* UART2_RXD (IOCFG146) */
-					0x22c 0		/* UART2_TXD (IOCFG147) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart2_cfg_idle: uart2_cfg_idle {
-				pinctrl-single,pins = <
-					0x220 0		/* GPIO (IOCFG144) */
-					0x224 0		/* GPIO (IOCFG145) */
-					0x228 0		/* GPIO (IOCFG146) */
-					0x22c 0		/* GPIO (IOCFG147) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart3_cfg_func: uart3_cfg_func {
-				pinctrl-single,pins = <
-					0x294 0		/* UART3_CTS (IOCFG173) */
-					0x298 0		/* UART3_RTS (IOCFG174) */
-					0x29c 0		/* UART3_RXD (IOCFG175) */
-					0x2a0 0		/* UART3_TXD (IOCFG176) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart3_cfg_idle: uart3_cfg_idle {
-				pinctrl-single,pins = <
-					0x294 0		/* UART3_CTS (IOCFG173) */
-					0x298 0		/* UART3_RTS (IOCFG174) */
-					0x29c 0		/* UART3_RXD (IOCFG175) */
-					0x2a0 0		/* UART3_TXD (IOCFG176) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart4_cfg_func: uart4_cfg_func {
-				pinctrl-single,pins = <
-					0x2a4 0		/* UART4_CTS (IOCFG177) */
-					0x2a8 0		/* UART4_RTS (IOCFG178) */
-					0x2ac 0		/* UART4_RXD (IOCFG179) */
-					0x2b0 0		/* UART4_TXD (IOCFG180) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			i2c0_cfg_func: i2c0_cfg_func {
-				pinctrl-single,pins = <
-					0x17c 0		/* I2C0_SCL (IOCFG103) */
-					0x180 0		/* I2C0_SDA (IOCFG104) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			i2c1_cfg_func: i2c1_cfg_func {
-				pinctrl-single,pins = <
-					0x184 0		/* I2C1_SCL (IOCFG105) */
-					0x188 0		/* I2C1_SDA (IOCFG106) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			i2c2_cfg_func: i2c2_cfg_func {
-				pinctrl-single,pins = <
-					0x118 0		/* I2C2_SCL (IOCFG79) */
-					0x11c 0		/* I2C2_SDA (IOCFG80) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			i2c3_cfg_func: i2c3_cfg_func {
-				pinctrl-single,pins = <
-					0x100 0		/* I2C3_SCL (IOCFG73) */
-					0x104 0		/* I2C3_SDA (IOCFG74) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			spi0_cfg_func1: spi0_cfg_func1 {
-				pinctrl-single,pins = <
-					0x1d4 0		/* SPI0_CLK (IOCFG125) */
-					0x1d8 0		/* SPI0_DI (IOCFG126) */
-					0x1dc 0		/* SPI0_DO (IOCFG127) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			spi0_cfg_func2: spi0_cfg_func2 {
-				pinctrl-single,pins = <
-					0x1e0 0		/* SPI0_CS0 (IOCFG128) */
-					0x1e4 0		/* SPI0_CS1 (IOCFG129) */
-					0x1e8 0		/* SPI0_CS2 (IOCFG130 */
-					0x1ec 0		/* SPI0_CS3 (IOCFG131) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			spi1_cfg_func1: spi1_cfg_func1 {
-				pinctrl-single,pins = <
-					0x1f0 0		/* SPI1_CLK (IOCFG132) */
-					0x1f4 0		/* SPI1_DI (IOCFG133) */
-					0x1f8 0		/* SPI1_DO (IOCFG134) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			spi1_cfg_func2: spi1_cfg_func2 {
-				pinctrl-single,pins = <
-					0x1fc 0		/* SPI1_CS (IOCFG135) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			kpc_cfg_func: kpc_cfg_func {
-				pinctrl-single,pins = <
-					0x250 0		/* KEY_IN0 (IOCFG156) */
-					0x254 0		/* KEY_IN1 (IOCFG157) */
-					0x258 0		/* KEY_IN2 (IOCFG158) */
-					0x230 0		/* KEY_OUT0 (IOCFG148) */
-					0x234 0		/* KEY_OUT1 (IOCFG149) */
-					0x238 0		/* KEY_OUT2 (IOCFG150) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			emmc_cfg_func: emmc_cfg_func {
-				pinctrl-single,pins = <
-					0x0ac 0		/* eMMC_CMD (IOCFG40) */
-					0x0b0 0		/* eMMC_CLK (IOCFG41) */
-					0x058 0		/* NAND_CS3_N (IOCFG19) */
-					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
-					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
-					0x08c 0		/* NAND_DATA8 (IOCFG32) */
-					0x090 0		/* NAND_DATA9 (IOCFG33) */
-					0x094 0		/* NAND_DATA10 (IOCFG34) */
-					0x098 0		/* NAND_DATA11 (IOCFG35) */
-					0x09c 0		/* NAND_DATA12 (IOCFG36) */
-					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
-					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
-					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			sd_cfg_func1: sd_cfg_func1 {
-				pinctrl-single,pins = <
-					0x18c 0		/* SD_CLK (IOCFG107) */
-					0x190 0		/* SD_CMD (IOCFG108) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			sd_cfg_func2: sd_cfg_func2 {
-				pinctrl-single,pins = <
-					0x194 0		/* SD_DATA0 (IOCFG109) */
-					0x198 0		/* SD_DATA1 (IOCFG110) */
-					0x19c 0		/* SD_DATA2 (IOCFG111) */
-					0x1a0 0		/* SD_DATA3 (IOCFG112) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x70 0xf0>;
-			};
-			nand_cfg_func1: nand_cfg_func1 {
-				pinctrl-single,pins = <
-					0x03c 0		/* NAND_ALE (IOCFG12) */
-					0x040 0		/* NAND_CLE (IOCFG13) */
-					0x06c 0		/* NAND_DATA0 (IOCFG24) */
-					0x070 0		/* NAND_DATA1 (IOCFG25) */
-					0x074 0		/* NAND_DATA2 (IOCFG26) */
-					0x078 0		/* NAND_DATA3 (IOCFG27) */
-					0x07c 0		/* NAND_DATA4 (IOCFG28) */
-					0x080 0		/* NAND_DATA5 (IOCFG29) */
-					0x084 0		/* NAND_DATA6 (IOCFG30) */
-					0x088 0		/* NAND_DATA7 (IOCFG31) */
-					0x08c 0		/* NAND_DATA8 (IOCFG32) */
-					0x090 0		/* NAND_DATA9 (IOCFG33) */
-					0x094 0		/* NAND_DATA10 (IOCFG34) */
-					0x098 0		/* NAND_DATA11 (IOCFG35) */
-					0x09c 0		/* NAND_DATA12 (IOCFG36) */
-					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
-					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
-					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			nand_cfg_func2: nand_cfg_func2 {
-				pinctrl-single,pins = <
-					0x044 0		/* NAND_RE_N (IOCFG14) */
-					0x048 0		/* NAND_WE_N (IOCFG15) */
-					0x04c 0		/* NAND_CS0_N (IOCFG16) */
-					0x050 0		/* NAND_CS1_N (IOCFG17) */
-					0x054 0		/* NAND_CS2_N (IOCFG18) */
-					0x058 0		/* NAND_CS3_N (IOCFG19) */
-					0x05c 0		/* NAND_BUSY0_N (IOCFG20) */
-					0x060 0		/* NAND_BUSY1_N (IOCFG21) */
-					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
-					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			sdio_cfg_func: sdio_cfg_func {
-				pinctrl-single,pins = <
-					0x1a4 0		/* SDIO0_CLK (IOCG113) */
-					0x1a8 0		/* SDIO0_CMD (IOCG114) */
-					0x1ac 0		/* SDIO0_DATA0 (IOCG115) */
-					0x1b0 0		/* SDIO0_DATA1 (IOCG116) */
-					0x1b4 0		/* SDIO0_DATA2 (IOCG117) */
-					0x1b8 0		/* SDIO0_DATA3 (IOCG118) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			audio_out_cfg_func: audio_out_cfg_func {
-				pinctrl-single,pins = <
-					0x200 0		/* GPIO (IOCFG136) */
-					0x204 0		/* GPIO (IOCFG137) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		call {
-			label = "call";
-			gpios = <&gpio17 2 0>;
-			linux,code = <169>;	/* KEY_PHONE */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
deleted file mode 100644
index cf48ec14af434..0000000000000
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ /dev/null
@@ -1,577 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * HiSilicon Ltd. Hi3620 SoC
- *
- * Copyright (C) 2012-2013 HiSilicon Ltd.
- * Copyright (C) 2012-2013 Linaro Ltd.
- *
- * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- */
-
-#include <dt-bindings/clock/hi3620-clock.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-	};
-
-	pclk: clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-		clock-output-names = "apb_pclk";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "hisilicon,hi3620-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	amba-bus {
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges = <0 0xfc000000 0x2000000>;
-
-		L2: cache-controller {
-			compatible = "arm,pl310-cache";
-			reg = <0x100000 0x100000>;
-			interrupts = <0 15 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			/* gic dist base, gic cpu base */
-			reg = <0x1000 0x1000>, <0x100 0x100>;
-		};
-
-		sysctrl: system-controller@802000 {
-			compatible = "hisilicon,sysctrl", "syscon";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x802000 0x1000>;
-			reg = <0x802000 0x1000>;
-
-			smp-offset = <0x31c>;
-			resume-offset = <0x308>;
-			reboot-offset = <0x4>;
-
-			clock: clock@0 {
-				compatible = "hisilicon,hi3620-clock";
-				reg = <0 0x10000>;
-				#clock-cells = <1>;
-			};
-		};
-
-		dual_timer0: dual_timer@800000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x800000 0x1000>;
-			/* timer00 & timer01 */
-			interrupts = <0 0 4>, <0 1 4>;
-			clocks = <&clock HI3620_TIMER0_MUX>,
-				 <&clock HI3620_TIMER1_MUX>,
-				 <&clock HI3620_TIMER0_MUX>;
-			clock-names = "timer0clk", "timer1clk", "apb_pclk";
-			status = "disabled";
-		};
-
-		dual_timer1: dual_timer@801000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x801000 0x1000>;
-			/* timer10 & timer11 */
-			interrupts = <0 2 4>, <0 3 4>;
-			clocks = <&clock HI3620_TIMER2_MUX>,
-				 <&clock HI3620_TIMER3_MUX>,
-				 <&clock HI3620_TIMER2_MUX>;
-			clock-names = "timer0clk", "timer1clk", "apb_pclk";
-			status = "disabled";
-		};
-
-		dual_timer2: dual_timer@a01000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0xa01000 0x1000>;
-			/* timer20 & timer21 */
-			interrupts = <0 4 4>, <0 5 4>;
-			clocks = <&clock HI3620_TIMER4_MUX>,
-				 <&clock HI3620_TIMER5_MUX>,
-				 <&clock HI3620_TIMER4_MUX>;
-			clock-names = "timer0lck", "timer1clk", "apb_pclk";
-			status = "disabled";
-		};
-
-		dual_timer3: dual_timer@a02000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0xa02000 0x1000>;
-			/* timer30 & timer31 */
-			interrupts = <0 6 4>, <0 7 4>;
-			clocks = <&clock HI3620_TIMER6_MUX>,
-				 <&clock HI3620_TIMER7_MUX>,
-				 <&clock HI3620_TIMER6_MUX>;
-			clock-names = "timer0clk", "timer1clk", "apb_pclk";
-			status = "disabled";
-		};
-
-		dual_timer4: dual_timer@a03000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0xa03000 0x1000>;
-			/* timer40 & timer41 */
-			interrupts = <0 96 4>, <0 97 4>;
-			clocks = <&clock HI3620_TIMER8_MUX>,
-				 <&clock HI3620_TIMER9_MUX>,
-				 <&clock HI3620_TIMER8_MUX>;
-			clock-names = "timer0clk", "timer1clk", "apb_pclk";
-			status = "disabled";
-		};
-
-		timer5: timer@600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x600 0x20>;
-			interrupts = <1 13 0xf01>;
-		};
-
-		uart0: serial@b00000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb00000 0x1000>;
-			interrupts = <0 20 4>;
-			clocks = <&clock HI3620_UARTCLK0>, <&clock HI3620_UARTCLK0>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		uart1: serial@b01000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb01000 0x1000>;
-			interrupts = <0 21 4>;
-			clocks = <&clock HI3620_UARTCLK1>, <&clock HI3620_UARTCLK1>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		uart2: serial@b02000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb02000 0x1000>;
-			interrupts = <0 22 4>;
-			clocks = <&clock HI3620_UARTCLK2>, <&clock HI3620_UARTCLK2>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		uart3: serial@b03000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb03000 0x1000>;
-			interrupts = <0 23 4>;
-			clocks = <&clock HI3620_UARTCLK3>, <&clock HI3620_UARTCLK3>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		uart4: serial@b04000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb04000 0x1000>;
-			interrupts = <0 24 4>;
-			clocks = <&clock HI3620_UARTCLK4>, <&clock HI3620_UARTCLK4>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		gpio0: gpio@806000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x806000 0x1000>;
-			interrupts = <0 64 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1
-					&pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK0>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio1: gpio@807000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x807000 0x1000>;
-			interrupts = <0 65 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
-					&pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1
-					&pmx0 6 5 1 &pmx0 7 6 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK1>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio2: gpio@808000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x808000 0x1000>;
-			interrupts = <0 66 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1
-					&pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1
-					&pmx0 6 3 1 &pmx0 7 3 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK2>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio3: gpio@809000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x809000 0x1000>;
-			interrupts = <0 67 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
-					&pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1
-					&pmx0 6 11 1 &pmx0 7 11 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK3>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio4: gpio@80a000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80a000 0x1000>;
-			interrupts = <0 68 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1
-					&pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1
-					&pmx0 6 13 1 &pmx0 7 13 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK4>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio5: gpio@80b000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80b000 0x1000>;
-			interrupts = <0 69 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1
-					&pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1
-					&pmx0 6 16 1 &pmx0 7 16 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK5>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio6: gpio@80c000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80c000 0x1000>;
-			interrupts = <0 70 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1
-					&pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1
-					&pmx0 6 18 1 &pmx0 7 19 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK6>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio7: gpio@80d000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80d000 0x1000>;
-			interrupts = <0 71 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1
-					&pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1
-					&pmx0 6 25 1 &pmx0 7 26 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK7>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio8: gpio@80e000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80e000 0x1000>;
-			interrupts = <0 72 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1
-					&pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1
-					&pmx0 6 33 1 &pmx0 7 34 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK8>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio9: gpio@80f000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80f000 0x1000>;
-			interrupts = <0 73 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1
-					&pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1
-					&pmx0 6 41 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK9>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio10: gpio@810000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x810000 0x1000>;
-			interrupts = <0 74 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1
-					&pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK10>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio11: gpio@811000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x811000 0x1000>;
-			interrupts = <0 75 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1
-					&pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1
-					&pmx0 6 49 1 &pmx0 7 49 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK11>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio12: gpio@812000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x812000 0x1000>;
-			interrupts = <0 76 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1
-					&pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1
-					&pmx0 6 51 1 &pmx0 7 52 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK12>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio13: gpio@813000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x813000 0x1000>;
-			interrupts = <0 77 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1
-					&pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1
-					&pmx0 6 55 1 &pmx0 7 56 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK13>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio14: gpio@814000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x814000 0x1000>;
-			interrupts = <0 78 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1
-					&pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1
-					&pmx0 6 60 1 &pmx0 7 61 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK14>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio15: gpio@815000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x815000 0x1000>;
-			interrupts = <0 79 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1
-					&pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1
-					&pmx0 6 64 1 &pmx0 7 65 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK15>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio16: gpio@816000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x816000 0x1000>;
-			interrupts = <0 80 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1
-					&pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1
-					&pmx0 6 72 1 &pmx0 7 73 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK16>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio17: gpio@817000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x817000 0x1000>;
-			interrupts = <0 81 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1
-					&pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1
-					&pmx0 6 80 1 &pmx0 7 81 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK17>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio18: gpio@818000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x818000 0x1000>;
-			interrupts = <0 82 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1
-					&pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1
-					&pmx0 6 86 1 &pmx0 7 87 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK18>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio19: gpio@819000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x819000 0x1000>;
-			interrupts = <0 83 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1
-					&pmx0 3 88 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK19>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio20: gpio@81a000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x81a000 0x1000>;
-			interrupts = <0 84 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1
-					&pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK20>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio21: gpio@81b000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x81b000 0x1000>;
-			interrupts = <0 85 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 3 94 1 &pmx0 7 96 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK21>;
-			clock-names = "apb_pclk";
-		};
-
-		pmx0: pinmux@803000 {
-			compatible = "pinctrl-single";
-			reg = <0x803000 0x188>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#pinctrl-cells = <1>;
-			#gpio-range-cells = <3>;
-			ranges;
-
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <7>;
-			/* pin base, nr pins & gpio function */
-			pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
-						&range 12 1 0 &range 13 29 1
-						&range 43 1 0 &range 44 49 1
-						&range 94 1 1 &range 96 2 1>;
-
-			range: gpio-range {
-				#pinctrl-single,gpio-range-cells = <3>;
-			};
-		};
-
-		pmx1: pinmux@803800 {
-			compatible = "pinconf-single";
-			reg = <0x803800 0x2dc>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#pinctrl-cells = <1>;
-			ranges;
-
-			pinctrl-single,register-width = <32>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
deleted file mode 100644
index b6b0225a769e6..0000000000000
--- a/arch/arm/boot/dts/highbank.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- */
-
-/dts-v1/;
-
-/* First 4KB has pen for secondary cores. */
-/memreserve/ 0x00000000 0x0001000;
-
-/ {
-	model = "Calxeda Highbank";
-	compatible = "calxeda,highbank";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@900 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x900>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-			operating-points = <
-				/* kHz    ignored */
-				 1300000  1000000
-				 1200000  1000000
-				 1100000  1000000
-				  800000  1000000
-				  400000  1000000
-				  200000  1000000
-			>;
-			clock-latency = <100000>;
-		};
-
-		cpu@901 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x901>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-			operating-points = <
-				/* kHz    ignored */
-				 1300000  1000000
-				 1200000  1000000
-				 1100000  1000000
-				  800000  1000000
-				  400000  1000000
-				  200000  1000000
-			>;
-			clock-latency = <100000>;
-		};
-
-		cpu@902 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x902>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-			operating-points = <
-				/* kHz    ignored */
-				 1300000  1000000
-				 1200000  1000000
-				 1100000  1000000
-				  800000  1000000
-				  400000  1000000
-				  200000  1000000
-			>;
-			clock-latency = <100000>;
-		};
-
-		cpu@903 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x903>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-			operating-points = <
-				/* kHz    ignored */
-				 1300000  1000000
-				 1200000  1000000
-				 1100000  1000000
-				  800000  1000000
-				  400000  1000000
-				  200000  1000000
-			>;
-			clock-latency = <100000>;
-		};
-	};
-
-	memory@0 {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x00000000 0xff900000>;
-	};
-
-	soc {
-		ranges = <0x00000000 0x00000000 0xffffffff>;
-
-		memory-controller@fff00000 {
-			compatible = "calxeda,hb-ddr-ctrl";
-			reg = <0xfff00000 0x1000>;
-			interrupts = <0 91 4>;
-		};
-
-		timer@fff10600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xfff10600 0x20>;
-			interrupts = <1 13 0xf01>;
-			clocks = <&a9periphclk>;
-		};
-
-		watchdog@fff10620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0xfff10620 0x20>;
-			interrupts = <1 14 0xf01>;
-			clocks = <&a9periphclk>;
-		};
-
-		intc: interrupt-controller@fff11000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0xfff11000 0x1000>,
-			      <0xfff10100 0x100>;
-		};
-
-		L2: cache-controller {
-			compatible = "arm,pl310-cache";
-			reg = <0xfff12000 0x1000>;
-			interrupts = <0 70 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
-		};
-
-
-		sregs@fff3c200 {
-			compatible = "calxeda,hb-sregs-l2-ecc";
-			reg = <0xfff3c200 0x100>;
-			interrupts = <0 71 4>, <0 72 4>;
-		};
-
-	};
-};
-
-/include/ "ecx-common.dtsi"
diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hip01-ca9x2.dts
deleted file mode 100644
index f3faf247cd611..0000000000000
--- a/arch/arm/boot/dts/hip01-ca9x2.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * HiSilicon Ltd. HiP01 SoC
- *
- * Copyright (C) 2014 HiSilicon Ltd.
- * Copyright (C) 2014 Huawei Ltd.
- *
- * Author: Wang Long <long.wanglong@huawei.com>
- */
-
-/dts-v1/;
-
-/* First 8KB reserved for secondary core boot */
-/memreserve/ 0x80000000 0x00002000;
-
-#include "hip01.dtsi"
-
-/ {
-	model = "Hisilicon HIP01 Development Board";
-	compatible = "hisilicon,hip01-ca9x2", "hisilicon,hip01";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "hisilicon,hip01-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
deleted file mode 100644
index e17f36bd9006a..0000000000000
--- a/arch/arm/boot/dts/hip01.dtsi
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * HiSilicon Ltd. HiP01 SoC
- *
- * Copyright (c) 2014 HiSilicon Ltd.
- * Copyright (c) 2014 Huawei Ltd.
- *
- * Author: Wang Long <long.wanglong@huawei.com>
- */
-
-/ {
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	gic: interrupt-controller@1e001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x1a001000 0x1000>, <0x1a000100 0x1000>;
-	};
-
-	hisi_refclk144mhz: refclk144mkhz {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <144000000>;
-		clock-output-names = "hisi:refclk144khz";
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges = <0 0x10000000 0x20000000>;
-
-		amba-bus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges;
-
-			uart0: serial@10001000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x10001000 0x1000>;
-				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
-				clock-names = "baudclk", "apb_pclk";
-				reg-shift = <2>;
-				interrupts = <0 32 4>;
-				status = "disabled";
-			};
-
-			uart1: serial@10002000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x10002000 0x1000>;
-				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
-				clock-names = "baudclk", "apb_pclk";
-				reg-shift = <2>;
-				interrupts = <0 33 4>;
-				status = "disabled";
-			};
-
-			uart2: serial@10003000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x10003000 0x1000>;
-				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
-				clock-names = "baudclk", "apb_pclk";
-				reg-shift = <2>;
-				interrupts = <0 34 4>;
-				status = "disabled";
-			};
-
-			uart3: serial@10006000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x10006000 0x1000>;
-				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
-				clock-names = "baudclk", "apb_pclk";
-				reg-shift = <2>;
-				interrupts = <0 4 4>;
-				status = "disabled";
-			};
-		};
-
-		system-controller@10000000 {
-			compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
-			reg = <0x10000000 0x1000>;
-			reboot-offset = <0x4>;
-		};
-
-		global_timer@a000200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x0a000200 0x100>;
-			interrupts = <1 11 0xf04>;
-			clocks = <&hisi_refclk144mhz>;
-		};
-
-		local_timer@a000600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x0a000600 0x100>;
-			interrupts = <1 13 0xf04>;
-			clocks = <&hisi_refclk144mhz>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
deleted file mode 100644
index 0210064bf6a5a..0000000000000
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2013-2014 Linaro Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- */
-
-/dts-v1/;
-
-#include "hip04.dtsi"
-
-/ {
-	/* memory bus is 64-bit */
-	#address-cells = <2>;
-	#size-cells = <2>;
-	model = "Hisilicon D01 Development Board";
-	compatible = "hisilicon,hip04-d01";
-
-	memory@0,10000000 {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000 0x00000000 0xc0000000>,
-		      <0x00000004 0xc0000000 0x00000003 0x40000000>;
-	};
-
-	soc {
-		uart0: serial@4007000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
deleted file mode 100644
index 2424cc545c9ce..0000000000000
--- a/arch/arm/boot/dts/hip04.dtsi
+++ /dev/null
@@ -1,986 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * HiSilicon Ltd. HiP04 SoC
- *
- * Copyright (C) 2013-2014 HiSilicon Ltd.
- * Copyright (C) 2013-2014 Linaro Ltd.
- *
- * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- */
-
-/ {
-	/* memory bus is 64-bit */
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	bootwrapper {
-		compatible = "hisilicon,hip04-bootwrapper";
-		boot-method = <0x10c00000 0x10000>, <0xe0000100 0x1000>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-				core1 {
-					cpu = <&CPU1>;
-				};
-				core2 {
-					cpu = <&CPU2>;
-				};
-				core3 {
-					cpu = <&CPU3>;
-				};
-			};
-			cluster1 {
-				core0 {
-					cpu = <&CPU4>;
-				};
-				core1 {
-					cpu = <&CPU5>;
-				};
-				core2 {
-					cpu = <&CPU6>;
-				};
-				core3 {
-					cpu = <&CPU7>;
-				};
-			};
-			cluster2 {
-				core0 {
-					cpu = <&CPU8>;
-				};
-				core1 {
-					cpu = <&CPU9>;
-				};
-				core2 {
-					cpu = <&CPU10>;
-				};
-				core3 {
-					cpu = <&CPU11>;
-				};
-			};
-			cluster3 {
-				core0 {
-					cpu = <&CPU12>;
-				};
-				core1 {
-					cpu = <&CPU13>;
-				};
-				core2 {
-					cpu = <&CPU14>;
-				};
-				core3 {
-					cpu = <&CPU15>;
-				};
-			};
-		};
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-		CPU2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-		};
-		CPU3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-		};
-		CPU4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x100>;
-		};
-		CPU5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x101>;
-		};
-		CPU6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x102>;
-		};
-		CPU7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x103>;
-		};
-		CPU8: cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x200>;
-		};
-		CPU9: cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x201>;
-		};
-		CPU10: cpu@202 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x202>;
-		};
-		CPU11: cpu@203 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x203>;
-		};
-		CPU12: cpu@300 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x300>;
-		};
-		CPU13: cpu@301 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x301>;
-		};
-		CPU14: cpu@302 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x302>;
-		};
-		CPU15: cpu@303 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x303>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-	};
-
-	clk_50m: clk_50m {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <50000000>;
-	};
-
-	clk_168m: clk_168m {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <168000000>;
-	};
-
-	clk_375m: clk_375m {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <375000000>;
-	};
-
-	soc {
-		/* It's a 32-bit SoC. */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges = <0 0 0xe0000000 0x10000000>;
-
-		gic: interrupt-controller@c01000 {
-			compatible = "hisilicon,hip04-intc";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			interrupts = <1 9 0xf04>;
-
-			reg = <0xc01000 0x1000>, <0xc02000 0x1000>,
-			      <0xc04000 0x2000>, <0xc06000 0x2000>;
-		};
-
-		sysctrl: sysctrl {
-			compatible = "hisilicon,sysctrl", "syscon";
-			reg = <0x3e00000 0x00100000>;
-		};
-
-		fabric: fabric {
-			compatible = "hisilicon,hip04-fabric";
-			reg = <0x302a000 0x1000>;
-		};
-
-		dual_timer0: dual_timer@3000000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x3000000 0x1000>;
-			interrupts = <0 224 4>;
-			clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>;
-			clock-names = "timer0clk", "timer1clk", "apb_pclk";
-		};
-
-		arm-pmu {
-			compatible = "arm,cortex-a15-pmu";
-			interrupts = <0 64 4>,
-				     <0 65 4>,
-				     <0 66 4>,
-				     <0 67 4>,
-				     <0 68 4>,
-				     <0 69 4>,
-				     <0 70 4>,
-				     <0 71 4>,
-				     <0 72 4>,
-				     <0 73 4>,
-				     <0 74 4>,
-				     <0 75 4>,
-				     <0 76 4>,
-				     <0 77 4>,
-				     <0 78 4>,
-				     <0 79 4>;
-		};
-
-		uart0: serial@4007000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x4007000 0x1000>;
-			interrupts = <0 381 4>;
-			clocks = <&clk_168m>, <&clk_168m>;
-			clock-names = "baudclk", "apb_pclk";
-			reg-shift = <2>;
-			status = "disabled";
-		};
-
-		sata0: sata@a000000 {
-			compatible = "hisilicon,hisi-ahci";
-			reg = <0xa000000 0x1000000>;
-			interrupts = <0 372 4>;
-		};
-
-	};
-
-	etb@0,e3c42000 {
-		compatible = "arm,coresight-etb10", "arm,primecell";
-		reg = <0 0xe3c42000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etb0_in_port: endpoint@0 {
-					remote-endpoint = <&replicator0_out_port0>;
-				};
-			};
-		};
-	};
-
-	etb@0,e3c82000 {
-		compatible = "arm,coresight-etb10", "arm,primecell";
-		reg = <0 0xe3c82000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etb1_in_port: endpoint@0 {
-					remote-endpoint = <&replicator1_out_port0>;
-				};
-			};
-		};
-	};
-
-	etb@0,e3cc2000 {
-		compatible = "arm,coresight-etb10", "arm,primecell";
-		reg = <0 0xe3cc2000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etb2_in_port: endpoint@0 {
-					remote-endpoint = <&replicator2_out_port0>;
-				};
-			};
-		};
-	};
-
-	etb@0,e3d02000 {
-		compatible = "arm,coresight-etb10", "arm,primecell";
-		reg = <0 0xe3d02000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etb3_in_port: endpoint@0 {
-					remote-endpoint = <&replicator3_out_port0>;
-				};
-			};
-		};
-	};
-
-	tpiu@0,e3c05000 {
-		compatible = "arm,coresight-tpiu", "arm,primecell";
-		reg = <0 0xe3c05000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				tpiu_in_port: endpoint@0 {
-					remote-endpoint = <&funnel4_out_port0>;
-				};
-			};
-		};
-	};
-
-	replicator0 {
-		/* non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-static-replicator";
-
-		out-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator0_out_port0: endpoint {
-					remote-endpoint = <&etb0_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator0_out_port1: endpoint {
-					remote-endpoint = <&funnel4_in_port0>;
-				};
-			};
-		};
-
-		in-ports {
-			port {
-				replicator0_in_port0: endpoint {
-					remote-endpoint = <&funnel0_out_port0>;
-				};
-			};
-		};
-	};
-
-	replicator1 {
-		/* non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-static-replicator";
-
-		out-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator1_out_port0: endpoint {
-					remote-endpoint = <&etb1_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator1_out_port1: endpoint {
-					remote-endpoint = <&funnel4_in_port1>;
-				};
-			};
-		};
-
-		in-ports {
-			port {
-				replicator1_in_port0: endpoint {
-					remote-endpoint = <&funnel1_out_port0>;
-				};
-			};
-		};
-	};
-
-	replicator2 {
-		/* non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-static-replicator";
-
-		out-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				replicator2_out_port0: endpoint {
-					remote-endpoint = <&etb2_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-					replicator2_out_port1: endpoint {
-					remote-endpoint = <&funnel4_in_port2>;
-				};
-			};
-		};
-
-		in-ports {
-			port {
-				replicator2_in_port0: endpoint {
-					remote-endpoint = <&funnel2_out_port0>;
-				};
-			};
-		};
-	};
-
-	replicator3 {
-		/* non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-static-replicator";
-
-		out-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				replicator3_out_port0: endpoint {
-					remote-endpoint = <&etb3_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator3_out_port1: endpoint {
-					remote-endpoint = <&funnel4_in_port3>;
-				};
-			};
-		};
-
-		in-ports {
-			port {
-				replicator3_in_port0: endpoint {
-					remote-endpoint = <&funnel3_out_port0>;
-				};
-			};
-		};
-	};
-
-	funnel@0,e3c41000 {
-		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-		reg = <0 0xe3c41000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				funnel0_out_port0: endpoint {
-					remote-endpoint =
-						<&replicator0_in_port0>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				funnel0_in_port0: endpoint {
-					remote-endpoint = <&ptm0_out_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				funnel0_in_port1: endpoint {
-					remote-endpoint = <&ptm1_out_port>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				funnel0_in_port2: endpoint {
-					remote-endpoint = <&ptm2_out_port>;
-				};
-			};
-
-			port@3 {
-				reg = <3>;
-				funnel0_in_port3: endpoint {
-					remote-endpoint = <&ptm3_out_port>;
-				};
-			};
-		};
-	};
-
-	funnel@0,e3c81000 {
-		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-		reg = <0 0xe3c81000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				funnel1_out_port0: endpoint {
-					remote-endpoint =
-						<&replicator1_in_port0>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				funnel1_in_port0: endpoint {
-					remote-endpoint = <&ptm4_out_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				funnel1_in_port1: endpoint {
-					remote-endpoint = <&ptm5_out_port>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				funnel1_in_port2: endpoint {
-					remote-endpoint = <&ptm6_out_port>;
-				};
-			};
-
-			port@3 {
-				reg = <3>;
-				funnel1_in_port3: endpoint {
-					remote-endpoint = <&ptm7_out_port>;
-				};
-			};
-		};
-	};
-
-	funnel@0,e3cc1000 {
-		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-		reg = <0 0xe3cc1000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				funnel2_out_port0: endpoint {
-					remote-endpoint =
-						<&replicator2_in_port0>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				funnel2_in_port0: endpoint {
-					remote-endpoint = <&ptm8_out_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				funnel2_in_port1: endpoint {
-					remote-endpoint = <&ptm9_out_port>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				funnel2_in_port2: endpoint {
-					remote-endpoint = <&ptm10_out_port>;
-				};
-			};
-
-			port@3 {
-				reg = <3>;
-				funnel2_in_port3: endpoint {
-					remote-endpoint = <&ptm11_out_port>;
-				};
-			};
-		};
-	};
-
-	funnel@0,e3d01000 {
-		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-		reg = <0 0xe3d01000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				funnel3_out_port0: endpoint {
-					remote-endpoint =
-						<&replicator3_in_port0>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				funnel3_in_port0: endpoint {
-					remote-endpoint = <&ptm12_out_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				funnel3_in_port1: endpoint {
-					remote-endpoint = <&ptm13_out_port>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				funnel3_in_port2: endpoint {
-					remote-endpoint = <&ptm14_out_port>;
-				};
-			};
-
-			port@3 {
-				reg = <3>;
-				funnel3_in_port3: endpoint {
-					remote-endpoint = <&ptm15_out_port>;
-				};
-			};
-		};
-	};
-
-	funnel@0,e3c04000 {
-		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-		reg = <0 0xe3c04000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				funnel4_out_port0: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				funnel4_in_port0: endpoint {
-					remote-endpoint =
-						<&replicator0_out_port1>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				funnel4_in_port1: endpoint {
-					remote-endpoint =
-						<&replicator1_out_port1>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				funnel4_in_port2: endpoint {
-					remote-endpoint =
-						<&replicator2_out_port1>;
-				};
-			};
-
-			port@3 {
-				reg = <3>;
-				funnel4_in_port3: endpoint {
-					remote-endpoint =
-						<&replicator3_out_port1>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3c7c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3c7c000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU0>;
-		out-ports {
-			port {
-				ptm0_out_port: endpoint {
-					remote-endpoint = <&funnel0_in_port0>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3c7d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3c7d000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU1>;
-		out-ports {
-			port {
-				ptm1_out_port: endpoint {
-					remote-endpoint = <&funnel0_in_port1>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3c7e000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3c7e000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU2>;
-		out-ports {
-			port {
-				ptm2_out_port: endpoint {
-					remote-endpoint = <&funnel0_in_port2>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3c7f000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3c7f000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU3>;
-		out-ports {
-			port {
-				ptm3_out_port: endpoint {
-					remote-endpoint = <&funnel0_in_port3>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3cbc000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3cbc000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU4>;
-		out-ports {
-			port {
-				ptm4_out_port: endpoint {
-					remote-endpoint = <&funnel1_in_port0>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3cbd000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3cbd000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU5>;
-		out-ports {
-			port {
-				ptm5_out_port: endpoint {
-					remote-endpoint = <&funnel1_in_port1>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3cbe000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3cbe000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU6>;
-		out-ports {
-			port {
-				ptm6_out_port: endpoint {
-					remote-endpoint = <&funnel1_in_port2>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3cbf000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3cbf000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU7>;
-		out-ports {
-			port {
-				ptm7_out_port: endpoint {
-					remote-endpoint = <&funnel1_in_port3>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3cfc000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3cfc000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU8>;
-		out-ports {
-			port {
-				ptm8_out_port: endpoint {
-					remote-endpoint = <&funnel2_in_port0>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3cfd000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3cfd000 0 0x1000>;
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU9>;
-		out-ports {
-			port {
-				ptm9_out_port: endpoint {
-					remote-endpoint = <&funnel2_in_port1>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3cfe000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3cfe000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU10>;
-		out-ports {
-			port {
-				ptm10_out_port: endpoint {
-					remote-endpoint = <&funnel2_in_port2>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3cff000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3cff000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU11>;
-		out-ports {
-			port {
-				ptm11_out_port: endpoint {
-					remote-endpoint = <&funnel2_in_port3>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3d3c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3d3c000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU12>;
-		out-ports {
-			port {
-				ptm12_out_port: endpoint {
-					remote-endpoint = <&funnel3_in_port0>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3d3d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3d3d000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU13>;
-		out-ports {
-			port {
-				ptm13_out_port: endpoint {
-					remote-endpoint = <&funnel3_in_port1>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3d3e000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3d3e000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU14>;
-		out-ports {
-			port {
-				ptm14_out_port: endpoint {
-					remote-endpoint = <&funnel3_in_port2>;
-				};
-			};
-		};
-	};
-
-	ptm@0,e3d3f000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0xe3d3f000 0 0x1000>;
-
-		clocks = <&clk_375m>;
-		clock-names = "apb_pclk";
-		cpu = <&CPU15>;
-		out-ports {
-			port {
-				ptm15_out_port: endpoint {
-					remote-endpoint = <&funnel3_in_port3>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
deleted file mode 100644
index 7758c19038f0e..0000000000000
--- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 HiSilicon Limited.
- */
-
-/dts-v1/;
-#include "hisi-x5hd2.dtsi"
-
-/ {
-	model = "Hisilicon HIX5HD2 Development Board";
-	compatible = "hisilicon,hix5hd2";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "hisilicon,hix5hd2-smp";
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&l2>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&l2>;
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>;
-	};
-};
-
-&timer0 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&gmac0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	phy-handle = <&phy2>;
-	phy-mode = "mii";
-	/* Placeholder, overwritten by bootloader */
-	mac-address = [00 00 00 00 00 00];
-	status = "okay";
-
-	phy2: ethernet-phy@2 {
-		reg = <2>;
-	};
-};
-
-&gmac1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
-	/* Placeholder, overwritten by bootloader */
-	mac-address = [00 00 00 00 00 00];
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&ahci {
-	phys = <&sata_phy>;
-	phy-names = "sata-phy";
-};
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
deleted file mode 100644
index dc991ba2a9fb7..0000000000000
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ /dev/null
@@ -1,558 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 HiSilicon Limited.
- */
-
-#include <dt-bindings/clock/hix5hd2-clock.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	gic: interrupt-controller@f8a01000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		/* gic dist base, gic cpu base */
-		reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges = <0 0xf8000000 0x8000000>;
-
-		amba-bus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges;
-
-			timer0: timer@2000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00002000 0x1000>;
-				/* timer00 & timer01 */
-				interrupts = <0 24 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			timer1: timer@a29000 {
-				/*
-				 * Only used in NORMAL state, not available ins
-				 * SLOW or DOZE state.
-				 * The rate is fixed in 24MHz.
-				 */
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00a29000 0x1000>;
-				/* timer10 & timer11 */
-				interrupts = <0 25 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			timer2: timer@a2a000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00a2a000 0x1000>;
-				/* timer20 & timer21 */
-				interrupts = <0 26 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			timer3: timer@a2b000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00a2b000 0x1000>;
-				/* timer30 & timer31 */
-				interrupts = <0 27 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			timer4: timer@a81000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00a81000 0x1000>;
-				/* timer30 & timer31 */
-				interrupts = <0 28 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			uart0: serial@b00000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x00b00000 0x1000>;
-				interrupts = <0 49 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "uartclk", "apb_pclk";
-				status = "disabled";
-			};
-
-			uart1: serial@6000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x00006000 0x1000>;
-				interrupts = <0 50 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "uartclk", "apb_pclk";
-				status = "disabled";
-			};
-
-			uart2: serial@b02000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x00b02000 0x1000>;
-				interrupts = <0 51 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "uartclk", "apb_pclk";
-				status = "disabled";
-			};
-
-			uart3: serial@b03000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x00b03000 0x1000>;
-				interrupts = <0 52 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "uartclk", "apb_pclk";
-				status = "disabled";
-			};
-
-			uart4: serial@b04000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb04000 0x1000>;
-				interrupts = <0 53 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "uartclk", "apb_pclk";
-				status = "disabled";
-			};
-
-			gpio0: gpio@b20000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb20000 0x1000>;
-				interrupts = <0 108 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio1: gpio@b21000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb21000 0x1000>;
-				interrupts = <0 109 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio2: gpio@b22000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb22000 0x1000>;
-				interrupts = <0 110 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio3: gpio@b23000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb23000 0x1000>;
-				interrupts = <0 111 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio4: gpio@b24000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb24000 0x1000>;
-				interrupts = <0 112 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio5: gpio@4000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0x004000 0x1000>;
-				interrupts = <0 113 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio6: gpio@b26000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb26000 0x1000>;
-				interrupts = <0 114 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio7: gpio@b27000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb27000 0x1000>;
-				interrupts = <0 115 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio8: gpio@b28000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb28000 0x1000>;
-				interrupts = <0 116 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio9: gpio@b29000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb29000 0x1000>;
-				interrupts = <0 117 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio10: gpio@b2a000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb2a000 0x1000>;
-				interrupts = <0 118 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio11: gpio@b2b000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb2b000 0x1000>;
-				interrupts = <0 119 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio12: gpio@b2c000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb2c000 0x1000>;
-				interrupts = <0 120 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio13: gpio@b2d000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb2d000 0x1000>;
-				interrupts = <0 121 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio14: gpio@b2e000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb2e000 0x1000>;
-				interrupts = <0 122 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio15: gpio@b2f000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb2f000 0x1000>;
-				interrupts = <0 123 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio16: gpio@b30000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb30000 0x1000>;
-				interrupts = <0 124 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio17: gpio@b31000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xb31000 0x1000>;
-				interrupts = <0 125 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				clocks = <&clock HIX5HD2_FIXED_100M>;
-				clock-names = "apb_pclk";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			wdt0: watchdog@a2c000 {
-				compatible = "arm,sp805", "arm,primecell";
-				arm,primecell-periphid = <0x00141805>;
-				reg = <0xa2c000 0x1000>;
-				interrupts = <0 29 4>;
-				clocks = <&clock HIX5HD2_WDG0_RST>,
-					 <&clock HIX5HD2_WDG0_RST>;
-				clock-names = "wdog_clk", "apb_pclk";
-			};
-		};
-
-		local_timer@a00600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x00a00600 0x20>;
-			interrupts = <1 13 0xf01>;
-		};
-
-		l2: cache-controller {
-			compatible = "arm,pl310-cache";
-			reg = <0x00a10000 0x100000>;
-			interrupts = <0 15 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		sysctrl: system-controller@0 {
-			compatible = "hisilicon,sysctrl", "syscon";
-			reg = <0x00000000 0x1000>;
-		};
-
-		reboot {
-			compatible = "syscon-reboot";
-			regmap = <&sysctrl>;
-			offset = <0x4>;
-			mask = <0xdeadbeef>;
-		};
-
-		cpuctrl@a22000 {
-			compatible = "hisilicon,cpuctrl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x00a22000 0x2000>;
-			ranges = <0 0x00a22000 0x2000>;
-
-			clock: clock@0 {
-				compatible = "hisilicon,hix5hd2-clock";
-				reg = <0 0x2000>;
-				#clock-cells = <1>;
-			};
-		};
-
-		/* unremovable emmc as mmcblk0 */
-		mmc: mmc@1830000 {
-			compatible = "snps,dw-mshc";
-			reg = <0x1830000 0x1000>;
-			interrupts = <0 35 4>;
-			clocks = <&clock HIX5HD2_MMC_CIU_RST>,
-				 <&clock HIX5HD2_MMC_BIU_CLK>;
-			clock-names = "biu", "ciu";
-		};
-
-		sd: mmc@1820000 {
-			compatible = "snps,dw-mshc";
-			reg = <0x1820000 0x1000>;
-			interrupts = <0 34 4>;
-			clocks = <&clock HIX5HD2_SD_CIU_RST>,
-				 <&clock HIX5HD2_SD_BIU_CLK>;
-			clock-names = "biu", "ciu";
-		};
-
-		gmac0: ethernet@1840000 {
-			compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1";
-			reg = <0x1840000 0x1000>,<0x184300c 0x4>;
-			interrupts = <0 71 4>;
-			clocks = <&clock HIX5HD2_MAC0_CLK>;
-			clock-names = "mac_core";
-			status = "disabled";
-		};
-
-		gmac1: ethernet@1841000 {
-			compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1";
-			reg = <0x1841000 0x1000>,<0x1843010 0x4>;
-			interrupts = <0 72 4>;
-			clocks = <&clock HIX5HD2_MAC1_CLK>;
-			clock-names = "mac_core";
-			status = "disabled";
-		};
-
-		usb0: usb@1890000 {
-			compatible = "generic-ehci";
-			reg = <0x1890000 0x1000>;
-			interrupts = <0 66 4>;
-			clocks = <&clock HIX5HD2_USB_CLK>;
-		};
-
-		usb1: usb@1880000 {
-			compatible = "generic-ohci";
-			reg = <0x1880000 0x1000>;
-			interrupts = <0 67 4>;
-			clocks = <&clock HIX5HD2_USB_CLK>;
-		};
-
-		peripheral_ctrl: syscon@a20000 {
-			compatible = "hisilicon,peri-subctrl", "syscon";
-			reg = <0xa20000 0x1000>;
-		};
-
-		sata_phy: phy@1900000 {
-			compatible = "hisilicon,hix5hd2-sata-phy";
-			reg = <0x1900000 0x10000>;
-			#phy-cells = <0>;
-			hisilicon,peripheral-syscon = <&peripheral_ctrl>;
-			hisilicon,power-reg = <0x8 10>;
-		};
-
-		ahci: sata@1900000 {
-			compatible = "hisilicon,hisi-ahci";
-			reg = <0x1900000 0x10000>;
-			interrupts = <0 70 4>;
-			clocks = <&clock HIX5HD2_SATA_CLK>;
-		};
-
-		ir: ir@1000 {
-			compatible = "hisilicon,hix5hd2-ir";
-			reg = <0x001000 0x1000>;
-			interrupts = <0 47 4>;
-			clocks = <&clock HIX5HD2_FIXED_24M>;
-			hisilicon,power-syscon = <&sysctrl>;
-		};
-
-		i2c0: i2c@b10000 {
-			compatible = "hisilicon,hix5hd2-i2c";
-			reg = <0xb10000 0x1000>;
-			interrupts = <0 38 4>;
-			clocks = <&clock HIX5HD2_I2C0_RST>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@b11000 {
-			compatible = "hisilicon,hix5hd2-i2c";
-			reg = <0xb11000 0x1000>;
-			interrupts = <0 39 4>;
-			clocks = <&clock HIX5HD2_I2C1_RST>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@b12000 {
-			compatible = "hisilicon,hix5hd2-i2c";
-			reg = <0xb12000 0x1000>;
-			interrupts = <0 40 4>;
-			clocks = <&clock HIX5HD2_I2C2_RST>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@b13000 {
-			compatible = "hisilicon,hix5hd2-i2c";
-			reg = <0xb13000 0x1000>;
-			interrupts = <0 41 4>;
-			clocks = <&clock HIX5HD2_I2C3_RST>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c4: i2c@b16000 {
-			compatible = "hisilicon,hix5hd2-i2c";
-			reg = <0xb16000 0x1000>;
-			interrupts = <0 43 4>;
-			clocks = <&clock HIX5HD2_I2C4_RST>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c5: i2c@b17000 {
-			compatible = "hisilicon,hix5hd2-i2c";
-			reg = <0xb17000 0x1000>;
-			interrupts = <0 44 4>;
-			clocks = <&clock HIX5HD2_I2C5_RST>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/hisilicon/Makefile b/arch/arm/boot/dts/hisilicon/Makefile
new file mode 100644
index 0000000000000..5ce0512c0010e
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HI3xxx) += \
+	hi3620-hi4511.dtb
+dtb-$(CONFIG_ARCH_HIP01) += \
+	hip01-ca9x2.dtb
+dtb-$(CONFIG_ARCH_HIP04) += \
+	hip04-d01.dtb
+dtb-$(CONFIG_ARCH_HISI) += \
+	hi3519-demb.dtb
+dtb-$(CONFIG_ARCH_HIX5HD2) += \
+	hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_SD5203) += \
+	sd5203.dtb
diff --git a/arch/arm/boot/dts/hisilicon/hi3519-demb.dts b/arch/arm/boot/dts/hisilicon/hi3519-demb.dts
new file mode 100644
index 0000000000000..f473fa22e9ce5
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hi3519-demb.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ */
+
+/dts-v1/;
+#include "hi3519.dtsi"
+
+/ {
+	model = "HiSilicon HI3519 DEMO Board";
+	compatible = "hisilicon,hi3519";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dual_timer0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/hisilicon/hi3519.dtsi b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
new file mode 100644
index 0000000000000..c524c854d3192
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <dt-bindings/clock/hi3519-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller@10300000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
+	};
+
+	clk_3m: clk_3m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <3000000>;
+	};
+
+	crg: clock-reset-controller@12010000 {
+		compatible = "hisilicon,hi3519-crg";
+		#clock-cells = <1>;
+		#reset-cells = <2>;
+		reg = <0x12010000 0x10000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		uart0: serial@12100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12100000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disable";
+		};
+
+		uart1: serial@12101000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12101000 0x1000>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disable";
+		};
+
+		uart2: serial@12102000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12102000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disable";
+		};
+
+		uart3: serial@12103000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12103000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disable";
+		};
+
+		uart4: serial@12104000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12104000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer0: timer@12000000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12000000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer1: timer@12001000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12001000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer2: timer@12002000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12002000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		spi_bus0: spi@12120000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12120000 0x1000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI0_CLK>, <&crg HI3519_SPI0_CLK>;
+			clock-names = "sspclk", "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		spi_bus1: spi@12121000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12121000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI1_CLK>, <&crg HI3519_SPI1_CLK>;
+			clock-names = "sspclk", "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		spi_bus2: spi@12122000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12122000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI2_CLK>, <&crg HI3519_SPI2_CLK>;
+			clock-names = "sspclk", "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		sysctrl: system-controller@12020000 {
+			compatible = "hisilicon,hi3519-sysctrl", "syscon";
+			reg = <0x12020000 0x1000>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&sysctrl>;
+			offset = <0x4>;
+			mask = <0xdeadbeef>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hisilicon/hi3620-hi4511.dts b/arch/arm/boot/dts/hisilicon/hi3620-hi4511.dts
new file mode 100644
index 0000000000000..f1c816a1d7cf7
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hi3620-hi4511.dts
@@ -0,0 +1,647 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012-2013 Linaro Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "hi3620.dtsi"
+
+/ {
+	model = "Hisilicon Hi4511 Development Board";
+	compatible = "hisilicon,hi3620-hi4511";
+
+	chosen {
+		bootargs = "root=/dev/ram0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	amba-bus {
+		dual_timer0: dual_timer@800000 {
+			status = "okay";
+		};
+
+		uart0: serial@b00000 {	/* console */
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
+			status = "okay";
+		};
+
+		uart1: serial@b01000 { /* modem */
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
+			status = "okay";
+		};
+
+		uart2: serial@b02000 { /* audience */
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
+			status = "okay";
+		};
+
+		uart3: serial@b03000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
+			status = "okay";
+		};
+
+		uart4: serial@b04000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
+			status = "okay";
+		};
+
+		pmx0: pinmux@803000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&board_pmx_pins>;
+
+			board_pmx_pins: board-pins {
+				pinctrl-single,pins = <
+					0x008 0x0	/* GPIO -- eFUSE_DOUT */
+					0x100 0x0	/* USIM_CLK & USIM_DATA (IOMG63) */
+				>;
+			};
+			uart0_pmx_func: uart0-pins {
+				pinctrl-single,pins = <
+					0x0f0 0x0
+					0x0f4 0x0	/* UART0_RX & UART0_TX */
+				>;
+			};
+			uart0_pmx_idle: uart0-idle-pins {
+				pinctrl-single,pins = <
+					/*0x0f0 0x1*/	/* UART0_CTS & UART0_RTS */
+					0x0f4 0x1	/* UART0_RX & UART0_TX */
+				>;
+			};
+			uart1_pmx_func: uart1-pins {
+				pinctrl-single,pins = <
+					0x0f8 0x0	/* UART1_CTS & UART1_RTS (IOMG61) */
+					0x0fc 0x0	/* UART1_RX & UART1_TX (IOMG62) */
+				>;
+			};
+			uart1_pmx_idle: uart1-idle-pins {
+				pinctrl-single,pins = <
+					0x0f8 0x1	/* GPIO (IOMG61) */
+					0x0fc 0x1	/* GPIO (IOMG62) */
+				>;
+			};
+			uart2_pmx_func: uart2-pins {
+				pinctrl-single,pins = <
+					0x104 0x2	/* UART2_RXD (IOMG96) */
+					0x108 0x2	/* UART2_TXD (IOMG64) */
+				>;
+			};
+			uart2_pmx_idle: uart2-idle-pins {
+				pinctrl-single,pins = <
+					0x104 0x1	/* GPIO (IOMG96) */
+					0x108 0x1	/* GPIO (IOMG64) */
+				>;
+			};
+			uart3_pmx_func: uart3-pins {
+				pinctrl-single,pins = <
+					0x160 0x2	/* UART3_CTS & UART3_RTS (IOMG85) */
+					0x164 0x2	/* UART3_RXD & UART3_TXD (IOMG86) */
+				>;
+			};
+			uart3_pmx_idle: uart3-idle-pins {
+				pinctrl-single,pins = <
+					0x160 0x1	/* GPIO (IOMG85) */
+					0x164 0x1	/* GPIO (IOMG86) */
+				>;
+			};
+			uart4_pmx_func: uart4-pins {
+				pinctrl-single,pins = <
+					0x168 0x0	/* UART4_CTS & UART4_RTS (IOMG87) */
+					0x16c 0x0	/* UART4_RXD (IOMG88) */
+					0x170 0x0	/* UART4_TXD (IOMG93) */
+				>;
+			};
+			uart4_pmx_idle: uart4-idle-pins {
+				pinctrl-single,pins = <
+					0x168 0x1	/* GPIO (IOMG87) */
+					0x16c 0x1	/* GPIO (IOMG88) */
+					0x170 0x1	/* GPIO (IOMG93) */
+				>;
+			};
+			i2c0_pmx_func: i2c0-pins {
+				pinctrl-single,pins = <
+					0x0b4 0x0	/* I2C0_SCL & I2C0_SDA (IOMG45) */
+				>;
+			};
+			i2c0_pmx_idle: i2c0-idle-pins {
+				pinctrl-single,pins = <
+					0x0b4 0x1	/* GPIO (IOMG45) */
+				>;
+			};
+			i2c1_pmx_func: i2c1-pins {
+				pinctrl-single,pins = <
+					0x0b8 0x0	/* I2C1_SCL & I2C1_SDA (IOMG46) */
+				>;
+			};
+			i2c1_pmx_idle: i2c1-idle-pins {
+				pinctrl-single,pins = <
+					0x0b8 0x1	/* GPIO (IOMG46) */
+				>;
+			};
+			i2c2_pmx_func: i2c2-pins {
+				pinctrl-single,pins = <
+					0x068 0x0	/* I2C2_SCL (IOMG26) */
+					0x06c 0x0	/* I2C2_SDA (IOMG27) */
+				>;
+			};
+			i2c2_pmx_idle: i2c2-idle-pins {
+				pinctrl-single,pins = <
+					0x068 0x1	/* GPIO (IOMG26) */
+					0x06c 0x1	/* GPIO (IOMG27) */
+				>;
+			};
+			i2c3_pmx_func: i2c3-pins {
+				pinctrl-single,pins = <
+					0x050 0x2	/* I2C3_SCL (IOMG20) */
+					0x054 0x2	/* I2C3_SDA (IOMG21) */
+				>;
+			};
+			i2c3_pmx_idle: i2c3-idle-pins {
+				pinctrl-single,pins = <
+					0x050 0x1	/* GPIO (IOMG20) */
+					0x054 0x1	/* GPIO (IOMG21) */
+				>;
+			};
+			spi0_pmx_func: spi0-pins {
+				pinctrl-single,pins = <
+					0x0d4 0x0	/* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
+					0x0d8 0x0	/* SPI0_CS0 (IOMG54) */
+					0x0dc 0x0	/* SPI0_CS1 (IOMG55) */
+					0x0e0 0x0	/* SPI0_CS2 (IOMG56) */
+					0x0e4 0x0	/* SPI0_CS3 (IOMG57) */
+				>;
+			};
+			spi0_pmx_idle: spi0-idle-pins {
+				pinctrl-single,pins = <
+					0x0d4 0x1	/* GPIO (IOMG53) */
+					0x0d8 0x1	/* GPIO (IOMG54) */
+					0x0dc 0x1	/* GPIO (IOMG55) */
+					0x0e0 0x1	/* GPIO (IOMG56) */
+					0x0e4 0x1	/* GPIO (IOMG57) */
+				>;
+			};
+			spi1_pmx_func: spi1-pins {
+				pinctrl-single,pins = <
+					0x184 0x0	/* SPI1_CLK/SPI1_DI (IOMG98) */
+					0x0e8 0x0	/* SPI1_DO (IOMG58) */
+					0x0ec 0x0	/* SPI1_CS (IOMG95) */
+				>;
+			};
+			spi1_pmx_idle: spi1-idle-pins {
+				pinctrl-single,pins = <
+					0x184 0x1	/* GPIO (IOMG98) */
+					0x0e8 0x1	/* GPIO (IOMG58) */
+					0x0ec 0x1	/* GPIO (IOMG95) */
+				>;
+			};
+			kpc_pmx_func: kpc-pins {
+				pinctrl-single,pins = <
+					0x12c 0x0	/* KEY_IN0 (IOMG73) */
+					0x130 0x0	/* KEY_IN1 (IOMG74) */
+					0x134 0x0	/* KEY_IN2 (IOMG75) */
+					0x10c 0x0	/* KEY_OUT0 (IOMG65) */
+					0x110 0x0	/* KEY_OUT1 (IOMG66) */
+					0x114 0x0	/* KEY_OUT2 (IOMG67) */
+				>;
+			};
+			kpc_pmx_idle: kpc-idle-pins {
+				pinctrl-single,pins = <
+					0x12c 0x1	/* GPIO (IOMG73) */
+					0x130 0x1	/* GPIO (IOMG74) */
+					0x134 0x1	/* GPIO (IOMG75) */
+					0x10c 0x1	/* GPIO (IOMG65) */
+					0x110 0x1	/* GPIO (IOMG66) */
+					0x114 0x1	/* GPIO (IOMG67) */
+				>;
+			};
+			gpio_key_func: gpio-key-pins {
+				pinctrl-single,pins = <
+					0x10c 0x1	/* KEY_OUT0/GPIO (IOMG65) */
+					0x130 0x1	/* KEY_IN1/GPIO (IOMG74) */
+				>;
+			};
+			emmc_pmx_func: emmc-pins {
+				pinctrl-single,pins = <
+					0x030 0x2	/* eMMC_CMD/eMMC_CLK (IOMG12) */
+					0x018 0x0	/* NAND_CS3_N (IOMG6) */
+					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
+					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
+					0x02c 0x2	/* eMMC_DATA[0:7] (IOMG10) */
+				>;
+			};
+			emmc_pmx_idle: emmc-idle-pins {
+				pinctrl-single,pins = <
+					0x030 0x0	/* GPIO (IOMG12) */
+					0x018 0x1	/* GPIO (IOMG6) */
+					0x024 0x1	/* GPIO (IOMG8) */
+					0x028 0x1	/* GPIO (IOMG9) */
+					0x02c 0x1	/* GPIO (IOMG10) */
+				>;
+			};
+			sd_pmx_func: sd-pins {
+				pinctrl-single,pins = <
+					0x0bc 0x0	/* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
+					0x0c0 0x0	/* SD_DATA3 (IOMG48) */
+				>;
+			};
+			sd_pmx_idle: sd-idle-pins {
+				pinctrl-single,pins = <
+					0x0bc 0x1	/* GPIO (IOMG47) */
+					0x0c0 0x1	/* GPIO (IOMG48) */
+				>;
+			};
+			nand_pmx_func: nand-pins {
+				pinctrl-single,pins = <
+					0x00c 0x0	/* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
+					0x010 0x0	/* NAND_CS1_N (IOMG4) */
+					0x014 0x0	/* NAND_CS2_N (IOMG5) */
+					0x018 0x0	/* NAND_CS3_N (IOMG6) */
+					0x01c 0x0	/* NAND_BUSY0_N (IOMG94) */
+					0x020 0x0	/* NAND_BUSY1_N (IOMG7) */
+					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
+					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
+					0x02c 0x0	/* NAND_DATA[8:15] (IOMG10) */
+				>;
+			};
+			nand_pmx_idle: nand-idle-pins {
+				pinctrl-single,pins = <
+					0x00c 0x1	/* GPIO (IOMG3) */
+					0x010 0x1	/* GPIO (IOMG4) */
+					0x014 0x1	/* GPIO (IOMG5) */
+					0x018 0x1	/* GPIO (IOMG6) */
+					0x01c 0x1	/* GPIO (IOMG94) */
+					0x020 0x1	/* GPIO (IOMG7) */
+					0x024 0x1	/* GPIO (IOMG8) */
+					0x028 0x1	/* GPIO (IOMG9) */
+					0x02c 0x1	/* GPIO (IOMG10) */
+				>;
+			};
+			sdio_pmx_func: sdio-pins {
+				pinctrl-single,pins = <
+					0x0c4 0x0	/* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
+				>;
+			};
+			sdio_pmx_idle: sdio-idle-pins {
+				pinctrl-single,pins = <
+					0x0c4 0x1	/* GPIO (IOMG49) */
+				>;
+			};
+			audio_out_pmx_func: audio-out-pins {
+				pinctrl-single,pins = <
+					0x0f0 0x1	/* GPIO (IOMG59), audio spk & earphone */
+				>;
+			};
+		};
+
+		pmx1: pinmux@803800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <	&board_pu_pins &board_pd_pins &board_pd_ps_pins
+					&board_np_pins &board_ps_pins &kpc_cfg_func
+					&audio_out_cfg_func>;
+			board_pu_pins: board-pu-pins {
+				pinctrl-single,pins = <
+					0x014 0		/* GPIO_158 (IOCFG2) */
+					0x018 0		/* GPIO_159 (IOCFG3) */
+					0x01c 0		/* BOOT_MODE0 (IOCFG4) */
+					0x020 0		/* BOOT_MODE1 (IOCFG5) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+			};
+			board_pd_pins: board-pd-pins {
+				pinctrl-single,pins = <
+					0x038 0		/* eFUSE_DOUT (IOCFG11) */
+					0x150 0		/* ISP_GPIO8 (IOCFG93) */
+					0x154 0		/* ISP_GPIO9 (IOCFG94) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			board_pd_ps_pins: board-pd-ps-pins {
+				pinctrl-single,pins = <
+					0x2d8 0		/* CLK_OUT0 (IOCFG190) */
+					0x004 0		/* PMU_SPI_DATA (IOCFG192) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			board_np_pins: board-np-pins {
+				pinctrl-single,pins = <
+					0x24c 0		/* KEYPAD_OUT7 (IOCFG155) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			board_ps_pins: board-ps-pins {
+				pinctrl-single,pins = <
+					0x000 0		/* PMU_SPI_CLK (IOCFG191) */
+					0x008 0		/* PMU_SPI_CS_N (IOCFG193) */
+				>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			uart0_cfg_func: uart0-cfg-pins {
+				pinctrl-single,pins = <
+					0x208 0		/* UART0_RXD (IOCFG138) */
+					0x20c 0		/* UART0_TXD (IOCFG139) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart0_cfg_idle: uart0-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x208 0		/* UART0_RXD (IOCFG138) */
+					0x20c 0		/* UART0_TXD (IOCFG139) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart1_cfg_func: uart1-cfg-pins {
+				pinctrl-single,pins = <
+					0x210 0		/* UART1_CTS (IOCFG140) */
+					0x214 0		/* UART1_RTS (IOCFG141) */
+					0x218 0		/* UART1_RXD (IOCFG142) */
+					0x21c 0		/* UART1_TXD (IOCFG143) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart1_cfg_idle: uart1-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x210 0		/* UART1_CTS (IOCFG140) */
+					0x214 0		/* UART1_RTS (IOCFG141) */
+					0x218 0		/* UART1_RXD (IOCFG142) */
+					0x21c 0		/* UART1_TXD (IOCFG143) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart2_cfg_func: uart2-cfg-pins {
+				pinctrl-single,pins = <
+					0x220 0		/* UART2_CTS (IOCFG144) */
+					0x224 0		/* UART2_RTS (IOCFG145) */
+					0x228 0		/* UART2_RXD (IOCFG146) */
+					0x22c 0		/* UART2_TXD (IOCFG147) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart2_cfg_idle: uart2-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x220 0		/* GPIO (IOCFG144) */
+					0x224 0		/* GPIO (IOCFG145) */
+					0x228 0		/* GPIO (IOCFG146) */
+					0x22c 0		/* GPIO (IOCFG147) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart3_cfg_func: uart3-cfg-pins {
+				pinctrl-single,pins = <
+					0x294 0		/* UART3_CTS (IOCFG173) */
+					0x298 0		/* UART3_RTS (IOCFG174) */
+					0x29c 0		/* UART3_RXD (IOCFG175) */
+					0x2a0 0		/* UART3_TXD (IOCFG176) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart3_cfg_idle: uart3-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x294 0		/* UART3_CTS (IOCFG173) */
+					0x298 0		/* UART3_RTS (IOCFG174) */
+					0x29c 0		/* UART3_RXD (IOCFG175) */
+					0x2a0 0		/* UART3_TXD (IOCFG176) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart4_cfg_func: uart4-cfg-pins {
+				pinctrl-single,pins = <
+					0x2a4 0		/* UART4_CTS (IOCFG177) */
+					0x2a8 0		/* UART4_RTS (IOCFG178) */
+					0x2ac 0		/* UART4_RXD (IOCFG179) */
+					0x2b0 0		/* UART4_TXD (IOCFG180) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			i2c0_cfg_func: i2c0-cfg-pins {
+				pinctrl-single,pins = <
+					0x17c 0		/* I2C0_SCL (IOCFG103) */
+					0x180 0		/* I2C0_SDA (IOCFG104) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			i2c1_cfg_func: i2c1-cfg-pins {
+				pinctrl-single,pins = <
+					0x184 0		/* I2C1_SCL (IOCFG105) */
+					0x188 0		/* I2C1_SDA (IOCFG106) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			i2c2_cfg_func: i2c2-cfg-pins {
+				pinctrl-single,pins = <
+					0x118 0		/* I2C2_SCL (IOCFG79) */
+					0x11c 0		/* I2C2_SDA (IOCFG80) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			i2c3_cfg_func: i2c3-cfg-pins {
+				pinctrl-single,pins = <
+					0x100 0		/* I2C3_SCL (IOCFG73) */
+					0x104 0		/* I2C3_SDA (IOCFG74) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi0_cfg_func1: spi0-cfg-func1-pins {
+				pinctrl-single,pins = <
+					0x1d4 0		/* SPI0_CLK (IOCFG125) */
+					0x1d8 0		/* SPI0_DI (IOCFG126) */
+					0x1dc 0		/* SPI0_DO (IOCFG127) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi0_cfg_func2: spi0-cfg-func2-pins {
+				pinctrl-single,pins = <
+					0x1e0 0		/* SPI0_CS0 (IOCFG128) */
+					0x1e4 0		/* SPI0_CS1 (IOCFG129) */
+					0x1e8 0		/* SPI0_CS2 (IOCFG130 */
+					0x1ec 0		/* SPI0_CS3 (IOCFG131) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi1_cfg_func1: spi1-cfg-func1-pins {
+				pinctrl-single,pins = <
+					0x1f0 0		/* SPI1_CLK (IOCFG132) */
+					0x1f4 0		/* SPI1_DI (IOCFG133) */
+					0x1f8 0		/* SPI1_DO (IOCFG134) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi1_cfg_func2: spi1-cfg-func2-pins {
+				pinctrl-single,pins = <
+					0x1fc 0		/* SPI1_CS (IOCFG135) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			kpc_cfg_func: kpc-cfg-pins {
+				pinctrl-single,pins = <
+					0x250 0		/* KEY_IN0 (IOCFG156) */
+					0x254 0		/* KEY_IN1 (IOCFG157) */
+					0x258 0		/* KEY_IN2 (IOCFG158) */
+					0x230 0		/* KEY_OUT0 (IOCFG148) */
+					0x234 0		/* KEY_OUT1 (IOCFG149) */
+					0x238 0		/* KEY_OUT2 (IOCFG150) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			emmc_cfg_func: emmc-cfg-pins {
+				pinctrl-single,pins = <
+					0x0ac 0		/* eMMC_CMD (IOCFG40) */
+					0x0b0 0		/* eMMC_CLK (IOCFG41) */
+					0x058 0		/* NAND_CS3_N (IOCFG19) */
+					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
+					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
+					0x08c 0		/* NAND_DATA8 (IOCFG32) */
+					0x090 0		/* NAND_DATA9 (IOCFG33) */
+					0x094 0		/* NAND_DATA10 (IOCFG34) */
+					0x098 0		/* NAND_DATA11 (IOCFG35) */
+					0x09c 0		/* NAND_DATA12 (IOCFG36) */
+					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
+					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
+					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			sd_cfg_func1: sd-cfg-func1-pins {
+				pinctrl-single,pins = <
+					0x18c 0		/* SD_CLK (IOCFG107) */
+					0x190 0		/* SD_CMD (IOCFG108) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			sd_cfg_func2: sd-cfg-func2-pins {
+				pinctrl-single,pins = <
+					0x194 0		/* SD_DATA0 (IOCFG109) */
+					0x198 0		/* SD_DATA1 (IOCFG110) */
+					0x19c 0		/* SD_DATA2 (IOCFG111) */
+					0x1a0 0		/* SD_DATA3 (IOCFG112) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x70 0xf0>;
+			};
+			nand_cfg_func1: nand-cfg-func1-pins {
+				pinctrl-single,pins = <
+					0x03c 0		/* NAND_ALE (IOCFG12) */
+					0x040 0		/* NAND_CLE (IOCFG13) */
+					0x06c 0		/* NAND_DATA0 (IOCFG24) */
+					0x070 0		/* NAND_DATA1 (IOCFG25) */
+					0x074 0		/* NAND_DATA2 (IOCFG26) */
+					0x078 0		/* NAND_DATA3 (IOCFG27) */
+					0x07c 0		/* NAND_DATA4 (IOCFG28) */
+					0x080 0		/* NAND_DATA5 (IOCFG29) */
+					0x084 0		/* NAND_DATA6 (IOCFG30) */
+					0x088 0		/* NAND_DATA7 (IOCFG31) */
+					0x08c 0		/* NAND_DATA8 (IOCFG32) */
+					0x090 0		/* NAND_DATA9 (IOCFG33) */
+					0x094 0		/* NAND_DATA10 (IOCFG34) */
+					0x098 0		/* NAND_DATA11 (IOCFG35) */
+					0x09c 0		/* NAND_DATA12 (IOCFG36) */
+					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
+					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
+					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			nand_cfg_func2: nand-cfg-func2-pins {
+				pinctrl-single,pins = <
+					0x044 0		/* NAND_RE_N (IOCFG14) */
+					0x048 0		/* NAND_WE_N (IOCFG15) */
+					0x04c 0		/* NAND_CS0_N (IOCFG16) */
+					0x050 0		/* NAND_CS1_N (IOCFG17) */
+					0x054 0		/* NAND_CS2_N (IOCFG18) */
+					0x058 0		/* NAND_CS3_N (IOCFG19) */
+					0x05c 0		/* NAND_BUSY0_N (IOCFG20) */
+					0x060 0		/* NAND_BUSY1_N (IOCFG21) */
+					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
+					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			sdio_cfg_func: sdio-cfg-pins {
+				pinctrl-single,pins = <
+					0x1a4 0		/* SDIO0_CLK (IOCG113) */
+					0x1a8 0		/* SDIO0_CMD (IOCG114) */
+					0x1ac 0		/* SDIO0_DATA0 (IOCG115) */
+					0x1b0 0		/* SDIO0_DATA1 (IOCG116) */
+					0x1b4 0		/* SDIO0_DATA2 (IOCG117) */
+					0x1b8 0		/* SDIO0_DATA3 (IOCG118) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			audio_out_cfg_func: audio-out-cfg-pins {
+				pinctrl-single,pins = <
+					0x200 0		/* GPIO (IOCFG136) */
+					0x204 0		/* GPIO (IOCFG137) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		call {
+			label = "call";
+			gpios = <&gpio17 2 0>;
+			linux,code = <169>;	/* KEY_PHONE */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hisilicon/hi3620.dtsi b/arch/arm/boot/dts/hisilicon/hi3620.dtsi
new file mode 100644
index 0000000000000..a254ec0092960
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hi3620.dtsi
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HiSilicon Ltd. Hi3620 SoC
+ *
+ * Copyright (C) 2012-2013 HiSilicon Ltd.
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ */
+
+#include <dt-bindings/clock/hi3620-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	pclk: clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "apb_pclk";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "hisilicon,hi3620-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	amba-bus {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0xfc000000 0x2000000>;
+
+		L2: cache-controller {
+			compatible = "arm,pl310-cache";
+			reg = <0x100000 0x100000>;
+			interrupts = <0 15 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			/* gic dist base, gic cpu base */
+			reg = <0x1000 0x1000>, <0x100 0x100>;
+		};
+
+		sysctrl: system-controller@802000 {
+			compatible = "hisilicon,sysctrl", "syscon";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x802000 0x1000>;
+			reg = <0x802000 0x1000>;
+
+			smp-offset = <0x31c>;
+			resume-offset = <0x308>;
+			reboot-offset = <0x4>;
+
+			clock: clock@0 {
+				compatible = "hisilicon,hi3620-clock";
+				reg = <0 0x10000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		dual_timer0: dual_timer@800000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x800000 0x1000>;
+			/* timer00 & timer01 */
+			interrupts = <0 0 4>, <0 1 4>;
+			clocks = <&clock HI3620_TIMER0_MUX>,
+				 <&clock HI3620_TIMER1_MUX>,
+				 <&clock HI3620_TIMER0_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer1: dual_timer@801000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x801000 0x1000>;
+			/* timer10 & timer11 */
+			interrupts = <0 2 4>, <0 3 4>;
+			clocks = <&clock HI3620_TIMER2_MUX>,
+				 <&clock HI3620_TIMER3_MUX>,
+				 <&clock HI3620_TIMER2_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer2: dual_timer@a01000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xa01000 0x1000>;
+			/* timer20 & timer21 */
+			interrupts = <0 4 4>, <0 5 4>;
+			clocks = <&clock HI3620_TIMER4_MUX>,
+				 <&clock HI3620_TIMER5_MUX>,
+				 <&clock HI3620_TIMER4_MUX>;
+			clock-names = "timer0lck", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer3: dual_timer@a02000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xa02000 0x1000>;
+			/* timer30 & timer31 */
+			interrupts = <0 6 4>, <0 7 4>;
+			clocks = <&clock HI3620_TIMER6_MUX>,
+				 <&clock HI3620_TIMER7_MUX>,
+				 <&clock HI3620_TIMER6_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer4: dual_timer@a03000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xa03000 0x1000>;
+			/* timer40 & timer41 */
+			interrupts = <0 96 4>, <0 97 4>;
+			clocks = <&clock HI3620_TIMER8_MUX>,
+				 <&clock HI3620_TIMER9_MUX>,
+				 <&clock HI3620_TIMER8_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer5: timer@600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x600 0x20>;
+			interrupts = <1 13 0xf01>;
+		};
+
+		uart0: serial@b00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb00000 0x1000>;
+			interrupts = <0 20 4>;
+			clocks = <&clock HI3620_UARTCLK0>, <&clock HI3620_UARTCLK0>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@b01000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb01000 0x1000>;
+			interrupts = <0 21 4>;
+			clocks = <&clock HI3620_UARTCLK1>, <&clock HI3620_UARTCLK1>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@b02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb02000 0x1000>;
+			interrupts = <0 22 4>;
+			clocks = <&clock HI3620_UARTCLK2>, <&clock HI3620_UARTCLK2>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: serial@b03000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb03000 0x1000>;
+			interrupts = <0 23 4>;
+			clocks = <&clock HI3620_UARTCLK3>, <&clock HI3620_UARTCLK3>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart4: serial@b04000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb04000 0x1000>;
+			interrupts = <0 24 4>;
+			clocks = <&clock HI3620_UARTCLK4>, <&clock HI3620_UARTCLK4>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio0: gpio@806000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x806000 0x1000>;
+			interrupts = <0 64 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1
+					&pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@807000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x807000 0x1000>;
+			interrupts = <0 65 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+					&pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1
+					&pmx0 6 5 1 &pmx0 7 6 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@808000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x808000 0x1000>;
+			interrupts = <0 66 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1
+					&pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1
+					&pmx0 6 3 1 &pmx0 7 3 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@809000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x809000 0x1000>;
+			interrupts = <0 67 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+					&pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1
+					&pmx0 6 11 1 &pmx0 7 11 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@80a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80a000 0x1000>;
+			interrupts = <0 68 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1
+					&pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1
+					&pmx0 6 13 1 &pmx0 7 13 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio5: gpio@80b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80b000 0x1000>;
+			interrupts = <0 69 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1
+					&pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1
+					&pmx0 6 16 1 &pmx0 7 16 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio6: gpio@80c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80c000 0x1000>;
+			interrupts = <0 70 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1
+					&pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1
+					&pmx0 6 18 1 &pmx0 7 19 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK6>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio7: gpio@80d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80d000 0x1000>;
+			interrupts = <0 71 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1
+					&pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1
+					&pmx0 6 25 1 &pmx0 7 26 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK7>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio8: gpio@80e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80e000 0x1000>;
+			interrupts = <0 72 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1
+					&pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1
+					&pmx0 6 33 1 &pmx0 7 34 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK8>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio9: gpio@80f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80f000 0x1000>;
+			interrupts = <0 73 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1
+					&pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1
+					&pmx0 6 41 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK9>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio10: gpio@810000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x810000 0x1000>;
+			interrupts = <0 74 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1
+					&pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK10>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio11: gpio@811000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x811000 0x1000>;
+			interrupts = <0 75 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1
+					&pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1
+					&pmx0 6 49 1 &pmx0 7 49 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK11>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio12: gpio@812000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x812000 0x1000>;
+			interrupts = <0 76 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1
+					&pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1
+					&pmx0 6 51 1 &pmx0 7 52 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK12>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio13: gpio@813000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x813000 0x1000>;
+			interrupts = <0 77 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1
+					&pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1
+					&pmx0 6 55 1 &pmx0 7 56 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK13>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio14: gpio@814000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x814000 0x1000>;
+			interrupts = <0 78 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1
+					&pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1
+					&pmx0 6 60 1 &pmx0 7 61 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK14>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio15: gpio@815000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x815000 0x1000>;
+			interrupts = <0 79 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1
+					&pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1
+					&pmx0 6 64 1 &pmx0 7 65 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK15>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio16: gpio@816000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x816000 0x1000>;
+			interrupts = <0 80 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1
+					&pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1
+					&pmx0 6 72 1 &pmx0 7 73 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK16>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio17: gpio@817000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x817000 0x1000>;
+			interrupts = <0 81 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1
+					&pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1
+					&pmx0 6 80 1 &pmx0 7 81 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK17>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio18: gpio@818000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x818000 0x1000>;
+			interrupts = <0 82 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1
+					&pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1
+					&pmx0 6 86 1 &pmx0 7 87 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK18>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio19: gpio@819000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x819000 0x1000>;
+			interrupts = <0 83 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1
+					&pmx0 3 88 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK19>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio20: gpio@81a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x81a000 0x1000>;
+			interrupts = <0 84 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1
+					&pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK20>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio21: gpio@81b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x81b000 0x1000>;
+			interrupts = <0 85 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 3 94 1 &pmx0 7 96 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK21>;
+			clock-names = "apb_pclk";
+		};
+
+		pmx0: pinmux@803000 {
+			compatible = "pinctrl-single";
+			reg = <0x803000 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <3>;
+
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
+						&range 12 1 0 &range 13 29 1
+						&range 43 1 0 &range 44 49 1
+						&range 94 1 1 &range 96 2 1>;
+
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+		};
+
+		pmx1: pinmux@803800 {
+			compatible = "pinconf-single";
+			reg = <0x803800 0x2dc>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+
+			pinctrl-single,register-width = <32>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hisilicon/hip01-ca9x2.dts b/arch/arm/boot/dts/hisilicon/hip01-ca9x2.dts
new file mode 100644
index 0000000000000..f3faf247cd611
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hip01-ca9x2.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HiSilicon Ltd. HiP01 SoC
+ *
+ * Copyright (C) 2014 HiSilicon Ltd.
+ * Copyright (C) 2014 Huawei Ltd.
+ *
+ * Author: Wang Long <long.wanglong@huawei.com>
+ */
+
+/dts-v1/;
+
+/* First 8KB reserved for secondary core boot */
+/memreserve/ 0x80000000 0x00002000;
+
+#include "hip01.dtsi"
+
+/ {
+	model = "Hisilicon HIP01 Development Board";
+	compatible = "hisilicon,hip01-ca9x2", "hisilicon,hip01";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "hisilicon,hip01-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/hisilicon/hip01.dtsi b/arch/arm/boot/dts/hisilicon/hip01.dtsi
new file mode 100644
index 0000000000000..e17f36bd9006a
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hip01.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HiSilicon Ltd. HiP01 SoC
+ *
+ * Copyright (c) 2014 HiSilicon Ltd.
+ * Copyright (c) 2014 Huawei Ltd.
+ *
+ * Author: Wang Long <long.wanglong@huawei.com>
+ */
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	gic: interrupt-controller@1e001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x1a001000 0x1000>, <0x1a000100 0x1000>;
+	};
+
+	hisi_refclk144mhz: refclk144mkhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <144000000>;
+		clock-output-names = "hisi:refclk144khz";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0x10000000 0x20000000>;
+
+		amba-bus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges;
+
+			uart0: serial@10001000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10001000 0x1000>;
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 32 4>;
+				status = "disabled";
+			};
+
+			uart1: serial@10002000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10002000 0x1000>;
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 33 4>;
+				status = "disabled";
+			};
+
+			uart2: serial@10003000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10003000 0x1000>;
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 34 4>;
+				status = "disabled";
+			};
+
+			uart3: serial@10006000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10006000 0x1000>;
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 4 4>;
+				status = "disabled";
+			};
+		};
+
+		system-controller@10000000 {
+			compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+			reg = <0x10000000 0x1000>;
+			reboot-offset = <0x4>;
+		};
+
+		global_timer@a000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x0a000200 0x100>;
+			interrupts = <1 11 0xf04>;
+			clocks = <&hisi_refclk144mhz>;
+		};
+
+		local_timer@a000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x0a000600 0x100>;
+			interrupts = <1 13 0xf04>;
+			clocks = <&hisi_refclk144mhz>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hisilicon/hip04-d01.dts b/arch/arm/boot/dts/hisilicon/hip04-d01.dts
new file mode 100644
index 0000000000000..0210064bf6a5a
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hip04-d01.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2013-2014 Linaro Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "hip04.dtsi"
+
+/ {
+	/* memory bus is 64-bit */
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Hisilicon D01 Development Board";
+	compatible = "hisilicon,hip04-d01";
+
+	memory@0,10000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000 0x00000000 0xc0000000>,
+		      <0x00000004 0xc0000000 0x00000003 0x40000000>;
+	};
+
+	soc {
+		uart0: serial@4007000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hisilicon/hip04.dtsi b/arch/arm/boot/dts/hisilicon/hip04.dtsi
new file mode 100644
index 0000000000000..2424cc545c9ce
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hip04.dtsi
@@ -0,0 +1,986 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HiSilicon Ltd. HiP04 SoC
+ *
+ * Copyright (C) 2013-2014 HiSilicon Ltd.
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ */
+
+/ {
+	/* memory bus is 64-bit */
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	bootwrapper {
+		compatible = "hisilicon,hip04-bootwrapper";
+		boot-method = <0x10c00000 0x10000>, <0xe0000100 0x1000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+				core1 {
+					cpu = <&CPU9>;
+				};
+				core2 {
+					cpu = <&CPU10>;
+				};
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU12>;
+				};
+				core1 {
+					cpu = <&CPU13>;
+				};
+				core2 {
+					cpu = <&CPU14>;
+				};
+				core3 {
+					cpu = <&CPU15>;
+				};
+			};
+		};
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+		};
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+		};
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x102>;
+		};
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x103>;
+		};
+		CPU8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x200>;
+		};
+		CPU9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x201>;
+		};
+		CPU10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x202>;
+		};
+		CPU11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x203>;
+		};
+		CPU12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x300>;
+		};
+		CPU13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x301>;
+		};
+		CPU14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x302>;
+		};
+		CPU15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x303>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	clk_50m: clk_50m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	clk_168m: clk_168m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <168000000>;
+	};
+
+	clk_375m: clk_375m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <375000000>;
+	};
+
+	soc {
+		/* It's a 32-bit SoC. */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0 0xe0000000 0x10000000>;
+
+		gic: interrupt-controller@c01000 {
+			compatible = "hisilicon,hip04-intc";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <1 9 0xf04>;
+
+			reg = <0xc01000 0x1000>, <0xc02000 0x1000>,
+			      <0xc04000 0x2000>, <0xc06000 0x2000>;
+		};
+
+		sysctrl: sysctrl {
+			compatible = "hisilicon,sysctrl", "syscon";
+			reg = <0x3e00000 0x00100000>;
+		};
+
+		fabric: fabric {
+			compatible = "hisilicon,hip04-fabric";
+			reg = <0x302a000 0x1000>;
+		};
+
+		dual_timer0: dual_timer@3000000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x3000000 0x1000>;
+			interrupts = <0 224 4>;
+			clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		};
+
+		arm-pmu {
+			compatible = "arm,cortex-a15-pmu";
+			interrupts = <0 64 4>,
+				     <0 65 4>,
+				     <0 66 4>,
+				     <0 67 4>,
+				     <0 68 4>,
+				     <0 69 4>,
+				     <0 70 4>,
+				     <0 71 4>,
+				     <0 72 4>,
+				     <0 73 4>,
+				     <0 74 4>,
+				     <0 75 4>,
+				     <0 76 4>,
+				     <0 77 4>,
+				     <0 78 4>,
+				     <0 79 4>;
+		};
+
+		uart0: serial@4007000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x4007000 0x1000>;
+			interrupts = <0 381 4>;
+			clocks = <&clk_168m>, <&clk_168m>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		sata0: sata@a000000 {
+			compatible = "hisilicon,hisi-ahci";
+			reg = <0xa000000 0x1000000>;
+			interrupts = <0 372 4>;
+		};
+
+	};
+
+	etb@0,e3c42000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3c42000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb0_in_port: endpoint@0 {
+					remote-endpoint = <&replicator0_out_port0>;
+				};
+			};
+		};
+	};
+
+	etb@0,e3c82000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3c82000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb1_in_port: endpoint@0 {
+					remote-endpoint = <&replicator1_out_port0>;
+				};
+			};
+		};
+	};
+
+	etb@0,e3cc2000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3cc2000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb2_in_port: endpoint@0 {
+					remote-endpoint = <&replicator2_out_port0>;
+				};
+			};
+		};
+	};
+
+	etb@0,e3d02000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3d02000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb3_in_port: endpoint@0 {
+					remote-endpoint = <&replicator3_out_port0>;
+				};
+			};
+		};
+	};
+
+	tpiu@0,e3c05000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0xe3c05000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				tpiu_in_port: endpoint@0 {
+					remote-endpoint = <&funnel4_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator0 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator0_out_port0: endpoint {
+					remote-endpoint = <&etb0_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator0_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator0_in_port0: endpoint {
+					remote-endpoint = <&funnel0_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator1 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator1_out_port0: endpoint {
+					remote-endpoint = <&etb1_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator1_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port1>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator1_in_port0: endpoint {
+					remote-endpoint = <&funnel1_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator2 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator2_out_port0: endpoint {
+					remote-endpoint = <&etb2_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+					replicator2_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port2>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator2_in_port0: endpoint {
+					remote-endpoint = <&funnel2_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator3 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator3_out_port0: endpoint {
+					remote-endpoint = <&etb3_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator3_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port3>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator3_in_port0: endpoint {
+					remote-endpoint = <&funnel3_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c41000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3c41000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel0_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator0_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel0_in_port0: endpoint {
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel0_in_port1: endpoint {
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel0_in_port2: endpoint {
+					remote-endpoint = <&ptm2_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel0_in_port3: endpoint {
+					remote-endpoint = <&ptm3_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c81000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3c81000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel1_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator1_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel1_in_port0: endpoint {
+					remote-endpoint = <&ptm4_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel1_in_port1: endpoint {
+					remote-endpoint = <&ptm5_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel1_in_port2: endpoint {
+					remote-endpoint = <&ptm6_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel1_in_port3: endpoint {
+					remote-endpoint = <&ptm7_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3cc1000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3cc1000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel2_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator2_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel2_in_port0: endpoint {
+					remote-endpoint = <&ptm8_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel2_in_port1: endpoint {
+					remote-endpoint = <&ptm9_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel2_in_port2: endpoint {
+					remote-endpoint = <&ptm10_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel2_in_port3: endpoint {
+					remote-endpoint = <&ptm11_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3d01000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3d01000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel3_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator3_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel3_in_port0: endpoint {
+					remote-endpoint = <&ptm12_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel3_in_port1: endpoint {
+					remote-endpoint = <&ptm13_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel3_in_port2: endpoint {
+					remote-endpoint = <&ptm14_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel3_in_port3: endpoint {
+					remote-endpoint = <&ptm15_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c04000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3c04000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel4_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel4_in_port0: endpoint {
+					remote-endpoint =
+						<&replicator0_out_port1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel4_in_port1: endpoint {
+					remote-endpoint =
+						<&replicator1_out_port1>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel4_in_port2: endpoint {
+					remote-endpoint =
+						<&replicator2_out_port1>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel4_in_port3: endpoint {
+					remote-endpoint =
+						<&replicator3_out_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7c000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU0>;
+		out-ports {
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7d000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU1>;
+		out-ports {
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7e000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU2>;
+		out-ports {
+			port {
+				ptm2_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port2>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7f000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7f000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU3>;
+		out-ports {
+			port {
+				ptm3_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port3>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cbc000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbc000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU4>;
+		out-ports {
+			port {
+				ptm4_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cbd000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbd000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU5>;
+		out-ports {
+			port {
+				ptm5_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cbe000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbe000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU6>;
+		out-ports {
+			port {
+				ptm6_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port2>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cbf000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbf000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU7>;
+		out-ports {
+			port {
+				ptm7_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port3>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cfc000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfc000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU8>;
+		out-ports {
+			port {
+				ptm8_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cfd000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfd000 0 0x1000>;
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU9>;
+		out-ports {
+			port {
+				ptm9_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cfe000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfe000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU10>;
+		out-ports {
+			port {
+				ptm10_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port2>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cff000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cff000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU11>;
+		out-ports {
+			port {
+				ptm11_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port3>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3d3c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3c000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU12>;
+		out-ports {
+			port {
+				ptm12_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3d3d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3d000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU13>;
+		out-ports {
+			port {
+				ptm13_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3d3e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3e000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU14>;
+		out-ports {
+			port {
+				ptm14_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port2>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3d3f000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3f000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU15>;
+		out-ports {
+			port {
+				ptm15_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port3>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hisilicon/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisilicon/hisi-x5hd2-dkb.dts
new file mode 100644
index 0000000000000..7758c19038f0e
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hisi-x5hd2-dkb.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2014 Linaro Ltd.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
+ */
+
+/dts-v1/;
+#include "hisi-x5hd2.dtsi"
+
+/ {
+	model = "Hisilicon HIX5HD2 Development Board";
+	compatible = "hisilicon,hix5hd2";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "hisilicon,hix5hd2-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+};
+
+&timer0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-handle = <&phy2>;
+	phy-mode = "mii";
+	/* Placeholder, overwritten by bootloader */
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+};
+
+&gmac1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	/* Placeholder, overwritten by bootloader */
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ahci {
+	phys = <&sata_phy>;
+	phy-names = "sata-phy";
+};
diff --git a/arch/arm/boot/dts/hisilicon/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisilicon/hisi-x5hd2.dtsi
new file mode 100644
index 0000000000000..dc991ba2a9fb7
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hisi-x5hd2.dtsi
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2014 Linaro Ltd.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
+ */
+
+#include <dt-bindings/clock/hix5hd2-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	gic: interrupt-controller@f8a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		/* gic dist base, gic cpu base */
+		reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0xf8000000 0x8000000>;
+
+		amba-bus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges;
+
+			timer0: timer@2000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00002000 0x1000>;
+				/* timer00 & timer01 */
+				interrupts = <0 24 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer1: timer@a29000 {
+				/*
+				 * Only used in NORMAL state, not available ins
+				 * SLOW or DOZE state.
+				 * The rate is fixed in 24MHz.
+				 */
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a29000 0x1000>;
+				/* timer10 & timer11 */
+				interrupts = <0 25 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer2: timer@a2a000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a2a000 0x1000>;
+				/* timer20 & timer21 */
+				interrupts = <0 26 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer3: timer@a2b000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a2b000 0x1000>;
+				/* timer30 & timer31 */
+				interrupts = <0 27 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer4: timer@a81000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a81000 0x1000>;
+				/* timer30 & timer31 */
+				interrupts = <0 28 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			uart0: serial@b00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00b00000 0x1000>;
+				interrupts = <0 49 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
+				status = "disabled";
+			};
+
+			uart1: serial@6000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00006000 0x1000>;
+				interrupts = <0 50 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
+				status = "disabled";
+			};
+
+			uart2: serial@b02000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00b02000 0x1000>;
+				interrupts = <0 51 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
+				status = "disabled";
+			};
+
+			uart3: serial@b03000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00b03000 0x1000>;
+				interrupts = <0 52 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
+				status = "disabled";
+			};
+
+			uart4: serial@b04000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb04000 0x1000>;
+				interrupts = <0 53 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
+				status = "disabled";
+			};
+
+			gpio0: gpio@b20000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb20000 0x1000>;
+				interrupts = <0 108 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@b21000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb21000 0x1000>;
+				interrupts = <0 109 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio2: gpio@b22000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb22000 0x1000>;
+				interrupts = <0 110 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio3: gpio@b23000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb23000 0x1000>;
+				interrupts = <0 111 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio4: gpio@b24000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb24000 0x1000>;
+				interrupts = <0 112 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio5: gpio@4000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0x004000 0x1000>;
+				interrupts = <0 113 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio6: gpio@b26000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb26000 0x1000>;
+				interrupts = <0 114 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio7: gpio@b27000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb27000 0x1000>;
+				interrupts = <0 115 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio8: gpio@b28000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb28000 0x1000>;
+				interrupts = <0 116 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio9: gpio@b29000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb29000 0x1000>;
+				interrupts = <0 117 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio10: gpio@b2a000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2a000 0x1000>;
+				interrupts = <0 118 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio11: gpio@b2b000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2b000 0x1000>;
+				interrupts = <0 119 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio12: gpio@b2c000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2c000 0x1000>;
+				interrupts = <0 120 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio13: gpio@b2d000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2d000 0x1000>;
+				interrupts = <0 121 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio14: gpio@b2e000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2e000 0x1000>;
+				interrupts = <0 122 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio15: gpio@b2f000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2f000 0x1000>;
+				interrupts = <0 123 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio16: gpio@b30000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb30000 0x1000>;
+				interrupts = <0 124 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio17: gpio@b31000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb31000 0x1000>;
+				interrupts = <0 125 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			wdt0: watchdog@a2c000 {
+				compatible = "arm,sp805", "arm,primecell";
+				arm,primecell-periphid = <0x00141805>;
+				reg = <0xa2c000 0x1000>;
+				interrupts = <0 29 4>;
+				clocks = <&clock HIX5HD2_WDG0_RST>,
+					 <&clock HIX5HD2_WDG0_RST>;
+				clock-names = "wdog_clk", "apb_pclk";
+			};
+		};
+
+		local_timer@a00600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x00a00600 0x20>;
+			interrupts = <1 13 0xf01>;
+		};
+
+		l2: cache-controller {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a10000 0x100000>;
+			interrupts = <0 15 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		sysctrl: system-controller@0 {
+			compatible = "hisilicon,sysctrl", "syscon";
+			reg = <0x00000000 0x1000>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&sysctrl>;
+			offset = <0x4>;
+			mask = <0xdeadbeef>;
+		};
+
+		cpuctrl@a22000 {
+			compatible = "hisilicon,cpuctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00a22000 0x2000>;
+			ranges = <0 0x00a22000 0x2000>;
+
+			clock: clock@0 {
+				compatible = "hisilicon,hix5hd2-clock";
+				reg = <0 0x2000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		/* unremovable emmc as mmcblk0 */
+		mmc: mmc@1830000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x1830000 0x1000>;
+			interrupts = <0 35 4>;
+			clocks = <&clock HIX5HD2_MMC_CIU_RST>,
+				 <&clock HIX5HD2_MMC_BIU_CLK>;
+			clock-names = "biu", "ciu";
+		};
+
+		sd: mmc@1820000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x1820000 0x1000>;
+			interrupts = <0 34 4>;
+			clocks = <&clock HIX5HD2_SD_CIU_RST>,
+				 <&clock HIX5HD2_SD_BIU_CLK>;
+			clock-names = "biu", "ciu";
+		};
+
+		gmac0: ethernet@1840000 {
+			compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1";
+			reg = <0x1840000 0x1000>,<0x184300c 0x4>;
+			interrupts = <0 71 4>;
+			clocks = <&clock HIX5HD2_MAC0_CLK>;
+			clock-names = "mac_core";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@1841000 {
+			compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1";
+			reg = <0x1841000 0x1000>,<0x1843010 0x4>;
+			interrupts = <0 72 4>;
+			clocks = <&clock HIX5HD2_MAC1_CLK>;
+			clock-names = "mac_core";
+			status = "disabled";
+		};
+
+		usb0: usb@1890000 {
+			compatible = "generic-ehci";
+			reg = <0x1890000 0x1000>;
+			interrupts = <0 66 4>;
+			clocks = <&clock HIX5HD2_USB_CLK>;
+		};
+
+		usb1: usb@1880000 {
+			compatible = "generic-ohci";
+			reg = <0x1880000 0x1000>;
+			interrupts = <0 67 4>;
+			clocks = <&clock HIX5HD2_USB_CLK>;
+		};
+
+		peripheral_ctrl: syscon@a20000 {
+			compatible = "hisilicon,peri-subctrl", "syscon";
+			reg = <0xa20000 0x1000>;
+		};
+
+		sata_phy: phy@1900000 {
+			compatible = "hisilicon,hix5hd2-sata-phy";
+			reg = <0x1900000 0x10000>;
+			#phy-cells = <0>;
+			hisilicon,peripheral-syscon = <&peripheral_ctrl>;
+			hisilicon,power-reg = <0x8 10>;
+		};
+
+		ahci: sata@1900000 {
+			compatible = "hisilicon,hisi-ahci";
+			reg = <0x1900000 0x10000>;
+			interrupts = <0 70 4>;
+			clocks = <&clock HIX5HD2_SATA_CLK>;
+		};
+
+		ir: ir@1000 {
+			compatible = "hisilicon,hix5hd2-ir";
+			reg = <0x001000 0x1000>;
+			interrupts = <0 47 4>;
+			clocks = <&clock HIX5HD2_FIXED_24M>;
+			hisilicon,power-syscon = <&sysctrl>;
+		};
+
+		i2c0: i2c@b10000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb10000 0x1000>;
+			interrupts = <0 38 4>;
+			clocks = <&clock HIX5HD2_I2C0_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@b11000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb11000 0x1000>;
+			interrupts = <0 39 4>;
+			clocks = <&clock HIX5HD2_I2C1_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@b12000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb12000 0x1000>;
+			interrupts = <0 40 4>;
+			clocks = <&clock HIX5HD2_I2C2_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@b13000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb13000 0x1000>;
+			interrupts = <0 41 4>;
+			clocks = <&clock HIX5HD2_I2C3_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@b16000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb16000 0x1000>;
+			interrupts = <0 43 4>;
+			clocks = <&clock HIX5HD2_I2C4_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@b17000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb17000 0x1000>;
+			interrupts = <0 44 4>;
+			clocks = <&clock HIX5HD2_I2C5_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hisilicon/sd5203.dts b/arch/arm/boot/dts/hisilicon/sd5203.dts
new file mode 100644
index 0000000000000..69381819e07b1
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/sd5203.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 HiSilicon Limited.
+ *
+ * DTS file for Hisilicon SD5203 Board
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Hisilicon SD5203";
+	compatible = "H836ASDJ", "hisilicon,sd5203";
+	interrupt-parent = <&vic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs = "console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0 {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
+		};
+	};
+
+	memory@30000000 {
+		device_type = "memory";
+		reg = <0x30000000 0x8000000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		vic: interrupt-controller@10130000 {
+			compatible = "snps,dw-apb-ictl";
+			reg = <0x10130000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		refclk125mhz: refclk125mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		timer0: timer@16002000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x16002000 0x1000>;
+			interrupts = <4>;
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		timer1: timer@16003000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x16003000 0x1000>;
+			interrupts = <5>;
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: serial@1600d000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x1600d000 0x1000>;
+			bus_id = "uart0";
+			clocks = <&refclk125mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			interrupts = <17>;
+		};
+
+		uart1: serial@1600c000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x1600c000 0x1000>;
+			clocks = <&refclk125mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
deleted file mode 100644
index 3a7382ce40efc..0000000000000
--- a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for HPE DL360Gen10
- */
-
-/include/ "hpe-gxp.dtsi"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "hpe,gxp-dl360gen10", "hpe,gxp";
-	model = "Hewlett Packard Enterprise ProLiant dl360 Gen10";
-
-	aliases {
-		serial0 = &uartc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
deleted file mode 100644
index cf735b3c4f356..0000000000000
--- a/arch/arm/boot/dts/hpe-gxp.dtsi
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for HPE GXP
- */
-
-/dts-v1/;
-/ {
-	model = "Hewlett Packard Enterprise GXP BMC";
-	compatible = "hpe,gxp";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			device_type = "cpu";
-			next-level-cache = <&L2>;
-		};
-	};
-
-	clocks {
-		pll: clock-0 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1600000000>;
-		};
-
-		iopclk: clock-1 {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&pll>;
-		};
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		dma-ranges;
-
-		L2: cache-controller@b0040000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xb0040000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		ahb@c0000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc0000000 0x30000000>;
-			dma-ranges;
-
-			vic0: interrupt-controller@eff0000 {
-				compatible = "arm,pl192-vic";
-				reg = <0xeff0000 0x1000>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			vic1: interrupt-controller@80f00000 {
-				compatible = "arm,pl192-vic";
-				reg = <0x80f00000 0x1000>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			uarta: serial@e0 {
-				compatible = "ns16550a";
-				reg = <0xe0 0x8>;
-				interrupts = <17>;
-				interrupt-parent = <&vic0>;
-				clock-frequency = <1846153>;
-				reg-shift = <0>;
-			};
-
-			uartb: serial@e8 {
-				compatible = "ns16550a";
-				reg = <0xe8 0x8>;
-				interrupts = <18>;
-				interrupt-parent = <&vic0>;
-				clock-frequency = <1846153>;
-				reg-shift = <0>;
-			};
-
-			uartc: serial@f0 {
-				compatible = "ns16550a";
-				reg = <0xf0 0x8>;
-				interrupts = <19>;
-				interrupt-parent = <&vic0>;
-				clock-frequency = <1846153>;
-				reg-shift = <0>;
-			};
-
-			usb0: usb@efe0000 {
-				compatible = "hpe,gxp-ehci", "generic-ehci";
-				reg = <0xefe0000 0x100>;
-				interrupts = <7>;
-				interrupt-parent = <&vic0>;
-			};
-
-			st: timer@80 {
-				compatible = "hpe,gxp-timer";
-				reg = <0x80 0x16>;
-				interrupts = <0>;
-				interrupt-parent = <&vic0>;
-				clocks = <&iopclk>;
-				clock-names = "iop";
-			};
-
-			usb1: usb@efe0100 {
-				compatible = "hpe,gxp-ohci", "generic-ohci";
-				reg = <0xefe0100 0x110>;
-				interrupts = <6>;
-				interrupt-parent = <&vic0>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/hpe/Makefile b/arch/arm/boot/dts/hpe/Makefile
new file mode 100644
index 0000000000000..e175b1732cdb5
--- /dev/null
+++ b/arch/arm/boot/dts/hpe/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HPE_GXP) += \
+	hpe-bmc-dl360gen10.dtb
diff --git a/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts
new file mode 100644
index 0000000000000..3a7382ce40efc
--- /dev/null
+++ b/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE DL360Gen10
+ */
+
+/include/ "hpe-gxp.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "hpe,gxp-dl360gen10", "hpe,gxp";
+	model = "Hewlett Packard Enterprise ProLiant dl360 Gen10";
+
+	aliases {
+		serial0 = &uartc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/hpe/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe/hpe-gxp.dtsi
new file mode 100644
index 0000000000000..cf735b3c4f356
--- /dev/null
+++ b/arch/arm/boot/dts/hpe/hpe-gxp.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE GXP
+ */
+
+/dts-v1/;
+/ {
+	model = "Hewlett Packard Enterprise GXP BMC";
+	compatible = "hpe,gxp";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+		};
+	};
+
+	clocks {
+		pll: clock-0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1600000000>;
+		};
+
+		iopclk: clock-1 {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		dma-ranges;
+
+		L2: cache-controller@b0040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0040000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ahb@c0000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000000 0x30000000>;
+			dma-ranges;
+
+			vic0: interrupt-controller@eff0000 {
+				compatible = "arm,pl192-vic";
+				reg = <0xeff0000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			vic1: interrupt-controller@80f00000 {
+				compatible = "arm,pl192-vic";
+				reg = <0x80f00000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			uarta: serial@e0 {
+				compatible = "ns16550a";
+				reg = <0xe0 0x8>;
+				interrupts = <17>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartb: serial@e8 {
+				compatible = "ns16550a";
+				reg = <0xe8 0x8>;
+				interrupts = <18>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartc: serial@f0 {
+				compatible = "ns16550a";
+				reg = <0xf0 0x8>;
+				interrupts = <19>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			usb0: usb@efe0000 {
+				compatible = "hpe,gxp-ehci", "generic-ehci";
+				reg = <0xefe0000 0x100>;
+				interrupts = <7>;
+				interrupt-parent = <&vic0>;
+			};
+
+			st: timer@80 {
+				compatible = "hpe,gxp-timer";
+				reg = <0x80 0x16>;
+				interrupts = <0>;
+				interrupt-parent = <&vic0>;
+				clocks = <&iopclk>;
+				clock-names = "iop";
+			};
+
+			usb1: usb@efe0100 {
+				compatible = "hpe,gxp-ohci", "generic-ohci";
+				reg = <0xefe0100 0x110>;
+				interrupts = <6>;
+				interrupt-parent = <&vic0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ibm-power9-dual.dtsi b/arch/arm/boot/dts/ibm-power9-dual.dtsi
deleted file mode 100644
index a0fa65b44b0fb..0000000000000
--- a/arch/arm/boot/dts/ibm-power9-dual.dtsi
+++ /dev/null
@@ -1,248 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright 2018 IBM Corp
-
-&fsi {
-	cfam@0,0 {
-		reg = <0 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <0>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_i2c0: i2c-bus@0 {
-				reg = <0>;
-			};
-
-			cfam0_i2c1: i2c-bus@1 {
-				reg = <1>;
-			};
-
-			cfam0_i2c2: i2c-bus@2 {
-				reg = <2>;
-			};
-
-			cfam0_i2c3: i2c-bus@3 {
-				reg = <3>;
-			};
-
-			cfam0_i2c4: i2c-bus@4 {
-				reg = <4>;
-			};
-
-			cfam0_i2c5: i2c-bus@5 {
-				reg = <5>;
-			};
-
-			cfam0_i2c6: i2c-bus@6 {
-				reg = <6>;
-			};
-
-			cfam0_i2c7: i2c-bus@7 {
-				reg = <7>;
-			};
-
-			cfam0_i2c8: i2c-bus@8 {
-				reg = <8>;
-			};
-
-			cfam0_i2c9: i2c-bus@9 {
-				reg = <9>;
-			};
-
-			cfam0_i2c10: i2c-bus@a {
-				reg = <10>;
-			};
-
-			cfam0_i2c11: i2c-bus@b {
-				reg = <11>;
-			};
-
-			cfam0_i2c12: i2c-bus@c {
-				reg = <12>;
-			};
-
-			cfam0_i2c13: i2c-bus@d {
-				reg = <13>;
-			};
-
-			cfam0_i2c14: i2c-bus@e {
-				reg = <14>;
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ0: occ@1 {
-				compatible = "ibm,p9-occ";
-			};
-		};
-
-		fsi_hub0: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-};
-
-&fsi_hub0 {
-	cfam@1,0 {
-		reg = <1 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <1>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_i2c0: i2c-bus@0 {
-				reg = <0>;
-			};
-
-			cfam1_i2c1: i2c-bus@1 {
-				reg = <1>;
-			};
-
-			cfam1_i2c2: i2c-bus@2 {
-				reg = <2>;
-			};
-
-			cfam1_i2c3: i2c-bus@3 {
-				reg = <3>;
-			};
-
-			cfam1_i2c4: i2c-bus@4 {
-				reg = <4>;
-			};
-
-			cfam1_i2c5: i2c-bus@5 {
-				reg = <5>;
-			};
-
-			cfam1_i2c6: i2c-bus@6 {
-				reg = <6>;
-			};
-
-			cfam1_i2c7: i2c-bus@7 {
-				reg = <7>;
-			};
-
-			cfam1_i2c8: i2c-bus@8 {
-				reg = <8>;
-			};
-
-			cfam1_i2c9: i2c-bus@9 {
-				reg = <9>;
-			};
-
-			cfam1_i2c10: i2c-bus@a {
-				reg = <10>;
-			};
-
-			cfam1_i2c11: i2c-bus@b {
-				reg = <11>;
-			};
-
-			cfam1_i2c12: i2c-bus@c {
-				reg = <12>;
-			};
-
-			cfam1_i2c13: i2c-bus@d {
-				reg = <13>;
-			};
-
-			cfam1_i2c14: i2c-bus@e {
-				reg = <14>;
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ1: occ@2 {
-				compatible = "ibm,p9-occ";
-			};
-		};
-
-		fsi_hub1: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-};
-
-/* Legacy OCC numbering (to get rid of when userspace is fixed) */
-&fsi_occ0 {
-	reg = <1>;
-};
-
-&fsi_occ1 {
-	reg = <2>;
-};
-
-/ {
-	aliases {
-		i2c100 = &cfam0_i2c0;
-		i2c101 = &cfam0_i2c1;
-		i2c102 = &cfam0_i2c2;
-		i2c103 = &cfam0_i2c3;
-		i2c104 = &cfam0_i2c4;
-		i2c105 = &cfam0_i2c5;
-		i2c106 = &cfam0_i2c6;
-		i2c107 = &cfam0_i2c7;
-		i2c108 = &cfam0_i2c8;
-		i2c109 = &cfam0_i2c9;
-		i2c110 = &cfam0_i2c10;
-		i2c111 = &cfam0_i2c11;
-		i2c112 = &cfam0_i2c12;
-		i2c113 = &cfam0_i2c13;
-		i2c114 = &cfam0_i2c14;
-		i2c200 = &cfam1_i2c0;
-		i2c201 = &cfam1_i2c1;
-		i2c202 = &cfam1_i2c2;
-		i2c203 = &cfam1_i2c3;
-		i2c204 = &cfam1_i2c4;
-		i2c205 = &cfam1_i2c5;
-		i2c206 = &cfam1_i2c6;
-		i2c207 = &cfam1_i2c7;
-		i2c208 = &cfam1_i2c8;
-		i2c209 = &cfam1_i2c9;
-		i2c210 = &cfam1_i2c10;
-		i2c211 = &cfam1_i2c11;
-		i2c212 = &cfam1_i2c12;
-		i2c213 = &cfam1_i2c13;
-		i2c214 = &cfam1_i2c14;
-	};
-};
diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts
deleted file mode 100644
index 5833fb6f15d88..0000000000000
--- a/arch/arm/boot/dts/imx1-ads.dts
+++ /dev/null
@@ -1,135 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-/dts-v1/;
-#include "imx1.dtsi"
-
-/ {
-	model = "Freescale MX1 ADS";
-	compatible = "fsl,imx1ads", "fsl,imx1";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@8000000 {
-		device_type = "memory";
-		reg = <0x08000000 0x04000000>;
-	};
-};
-
-&cspi1 {
-	pinctrl-0 = <&pinctrl_cspi1>;
-	cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c>;
-	status = "okay";
-
-	extgpio0: pcf8575@22 {
-		compatible = "nxp,pcf8575";
-		reg = <0x22>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	extgpio1: pcf8575@24 {
-		compatible = "nxp,pcf8575";
-		reg = <0x24>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim>;
-	status = "okay";
-
-	nor: nor@0,0 {
-		compatible = "cfi-flash";
-		reg = <0 0x00000000 0x02000000>;
-		bank-width = <4>;
-		fsl,weim-cs-timing = <0x00003e00 0x00000801>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&iomuxc {
-	imx1-ads {
-		pinctrl_cspi1: cspi1grp {
-			fsl,pins = <
-				MX1_PAD_SPI1_MISO__SPI1_MISO	0x0
-				MX1_PAD_SPI1_MOSI__SPI1_MOSI	0x0
-				MX1_PAD_SPI1_RDY__SPI1_RDY	0x0
-				MX1_PAD_SPI1_SCLK__SPI1_SCLK	0x0
-				MX1_PAD_SPI1_SS__GPIO3_15	0x0
-			>;
-		};
-
-		pinctrl_i2c: i2cgrp {
-			fsl,pins = <
-				MX1_PAD_I2C_SCL__I2C_SCL	0x0
-				MX1_PAD_I2C_SDA__I2C_SDA	0x0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX1_PAD_UART1_TXD__UART1_TXD	0x0
-				MX1_PAD_UART1_RXD__UART1_RXD	0x0
-				MX1_PAD_UART1_CTS__UART1_CTS	0x0
-				MX1_PAD_UART1_RTS__UART1_RTS	0x0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX1_PAD_UART2_TXD__UART2_TXD	0x0
-				MX1_PAD_UART2_RXD__UART2_RXD	0x0
-				MX1_PAD_UART2_CTS__UART2_CTS	0x0
-				MX1_PAD_UART2_RTS__UART2_RTS	0x0
-			>;
-		};
-
-		pinctrl_weim: weimgrp {
-			fsl,pins = <
-				MX1_PAD_A0__A0			0x0
-				MX1_PAD_A16__A16		0x0
-				MX1_PAD_A17__A17		0x0
-				MX1_PAD_A18__A18		0x0
-				MX1_PAD_A19__A19		0x0
-				MX1_PAD_A20__A20		0x0
-				MX1_PAD_A21__A21		0x0
-				MX1_PAD_A22__A22		0x0
-				MX1_PAD_A23__A23		0x0
-				MX1_PAD_A24__A24		0x0
-				MX1_PAD_BCLK__BCLK		0x0
-				MX1_PAD_CS4__CS4		0x0
-				MX1_PAD_DTACK__DTACK		0x0
-				MX1_PAD_ECB__ECB		0x0
-				MX1_PAD_LBA__LBA		0x0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts
deleted file mode 100644
index 77b21aa7a1469..0000000000000
--- a/arch/arm/boot/dts/imx1-apf9328.dts
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-/dts-v1/;
-#include "imx1.dtsi"
-
-/ {
-	model = "Armadeus APF9328";
-	compatible = "armadeus,imx1-apf9328", "fsl,imx1";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@8000000 {
-		device_type = "memory";
-		reg = <0x08000000 0x00800000>;
-	};
-};
-
-&i2c {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim>;
-	status = "okay";
-
-	nor: nor@0,0 {
-		compatible = "cfi-flash";
-		reg = <0 0x00000000 0x02000000>;
-		bank-width = <2>;
-		fsl,weim-cs-timing = <0x00330e04 0x00000d01>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	eth: eth@4,c00000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eth>;
-		compatible = "davicom,dm9000";
-		reg = <
-			4 0x00c00000 0x2
-			4 0x00c00002 0x2
-		>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
-		fsl,weim-cs-timing = <0x0000c700 0x19190d01>;
-	};
-};
-
-&iomuxc {
-	imx1-apf9328 {
-		pinctrl_eth: ethgrp {
-			fsl,pins = <
-				MX1_PAD_SIM_SVEN__GPIO2_14	0x0
-			>;
-		};
-
-		pinctrl_i2c: i2cgrp {
-			fsl,pins = <
-				MX1_PAD_I2C_SCL__I2C_SCL	0x0
-				MX1_PAD_I2C_SDA__I2C_SDA	0x0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX1_PAD_UART1_TXD__UART1_TXD	0x0
-				MX1_PAD_UART1_RXD__UART1_RXD	0x0
-				MX1_PAD_UART1_CTS__UART1_CTS	0x0
-				MX1_PAD_UART1_RTS__UART1_RTS	0x0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX1_PAD_UART2_TXD__UART2_TXD	0x0
-				MX1_PAD_UART2_RXD__UART2_RXD	0x0
-				MX1_PAD_UART2_CTS__UART2_CTS	0x0
-				MX1_PAD_UART2_RTS__UART2_RTS	0x0
-			>;
-		};
-
-		pinctrl_weim: weimgrp {
-			fsl,pins = <
-				MX1_PAD_A0__A0			0x0
-				MX1_PAD_A16__A16		0x0
-				MX1_PAD_A17__A17		0x0
-				MX1_PAD_A18__A18		0x0
-				MX1_PAD_A19__A19		0x0
-				MX1_PAD_A20__A20		0x0
-				MX1_PAD_A21__A21		0x0
-				MX1_PAD_A22__A22		0x0
-				MX1_PAD_A23__A23		0x0
-				MX1_PAD_A24__A24		0x0
-				MX1_PAD_BCLK__BCLK		0x0
-				MX1_PAD_CS4__CS4		0x0
-				MX1_PAD_DTACK__DTACK		0x0
-				MX1_PAD_ECB__ECB		0x0
-				MX1_PAD_LBA__LBA		0x0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx1-pinfunc.h b/arch/arm/boot/dts/imx1-pinfunc.h
deleted file mode 100644
index bd2e679cb26c0..0000000000000
--- a/arch/arm/boot/dts/imx1-pinfunc.h
+++ /dev/null
@@ -1,296 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-#ifndef __DTS_IMX1_PINFUNC_H
-#define __DTS_IMX1_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <pin mux_id>
- * mux_id consists of
- * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
- *
- * function:      0 - Primary function
- *                1 - Alternate function
- *                2 - GPIO
- * direction:     0 - Input
- *                1 - Output
- * gpio_oconf:    0 - A_IN
- *                1 - B_IN
- *                2 - A_OUT
- *                3 - Data Register
- * gpio_iconfa/b: 0 - GPIO_IN
- *                1 - Interrupt Status Register
- *                2 - 0
- *                3 - 1
- *
- * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32
- * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is
- * the pin number on the specific port (between 0 and 31).
- */
-
-#define MX1_PAD_A24__A24			0x00 0x004
-#define MX1_PAD_A24__GPIO1_0			0x00 0x032
-#define MX1_PAD_A24__SPI2_CLK			0x00 0x006
-#define MX1_PAD_TIN__TIN			0x01 0x000
-#define MX1_PAD_TIN__GPIO1_1			0x01 0x032
-#define MX1_PAD_TIN__SPI2_RXD			0x01 0x022
-#define MX1_PAD_PWMO__PWMO			0x02 0x004
-#define MX1_PAD_PWMO__GPIO1_2			0x02 0x032
-#define MX1_PAD_CSI_MCLK__CSI_MCLK		0x03 0x004
-#define MX1_PAD_CSI_MCLK__GPIO1_3		0x03 0x032
-#define MX1_PAD_CSI_D0__CSI_D0			0x04 0x000
-#define MX1_PAD_CSI_D0__GPIO1_4			0x04 0x032
-#define MX1_PAD_CSI_D1__CSI_D1			0x05 0x000
-#define MX1_PAD_CSI_D1__GPIO1_5			0x05 0x032
-#define MX1_PAD_CSI_D2__CSI_D2			0x06 0x000
-#define MX1_PAD_CSI_D2__GPIO1_6			0x06 0x032
-#define MX1_PAD_CSI_D3__CSI_D3			0x07 0x000
-#define MX1_PAD_CSI_D3__GPIO1_7			0x07 0x032
-#define MX1_PAD_CSI_D4__CSI_D4			0x08 0x000
-#define MX1_PAD_CSI_D4__GPIO1_8			0x08 0x032
-#define MX1_PAD_CSI_D5__CSI_D5			0x09 0x000
-#define MX1_PAD_CSI_D5__GPIO1_9			0x09 0x032
-#define MX1_PAD_CSI_D6__CSI_D6			0x0a 0x000
-#define MX1_PAD_CSI_D6__GPIO1_10		0x0a 0x032
-#define MX1_PAD_CSI_D7__CSI_D7			0x0b 0x000
-#define MX1_PAD_CSI_D7__GPIO1_11		0x0b 0x032
-#define MX1_PAD_CSI_VSYNC__CSI_VSYNC		0x0c 0x000
-#define MX1_PAD_CSI_VSYNC__GPIO1_12		0x0c 0x032
-#define MX1_PAD_CSI_HSYNC__CSI_HSYNC		0x0d 0x000
-#define MX1_PAD_CSI_HSYNC__GPIO1_13		0x0d 0x032
-#define MX1_PAD_CSI_PIXCLK__CSI_PIXCLK		0x0e 0x000
-#define MX1_PAD_CSI_PIXCLK__GPIO1_14		0x0e 0x032
-#define MX1_PAD_I2C_SDA__I2C_SDA		0x0f 0x000
-#define MX1_PAD_I2C_SDA__GPIO1_15		0x0f 0x032
-#define MX1_PAD_I2C_SCL__I2C_SCL		0x10 0x004
-#define MX1_PAD_I2C_SCL__GPIO1_16		0x10 0x032
-#define MX1_PAD_DTACK__DTACK			0x11 0x000
-#define MX1_PAD_DTACK__GPIO1_17			0x11 0x032
-#define MX1_PAD_DTACK__SPI2_SS			0x11 0x002
-#define MX1_PAD_DTACK__A25			0x11 0x016
-#define MX1_PAD_BCLK__BCLK			0x12 0x004
-#define MX1_PAD_BCLK__GPIO1_18			0x12 0x032
-#define MX1_PAD_LBA__LBA			0x13 0x004
-#define MX1_PAD_LBA__GPIO1_19			0x13 0x032
-#define MX1_PAD_ECB__ECB			0x14 0x000
-#define MX1_PAD_ECB__GPIO1_20			0x14 0x032
-#define MX1_PAD_A0__A0				0x15 0x004
-#define MX1_PAD_A0__GPIO1_21			0x15 0x032
-#define MX1_PAD_CS4__CS4			0x16 0x004
-#define MX1_PAD_CS4__GPIO1_22			0x16 0x032
-#define MX1_PAD_CS5__CS5			0x17 0x004
-#define MX1_PAD_CS5__GPIO1_23			0x17 0x032
-#define MX1_PAD_A16__A16			0x18 0x004
-#define MX1_PAD_A16__GPIO1_24			0x18 0x032
-#define MX1_PAD_A17__A17			0x19 0x004
-#define MX1_PAD_A17__GPIO1_25			0x19 0x032
-#define MX1_PAD_A18__A18			0x1a 0x004
-#define MX1_PAD_A18__GPIO1_26			0x1a 0x032
-#define MX1_PAD_A19__A19			0x1b 0x004
-#define MX1_PAD_A19__GPIO1_27			0x1b 0x032
-#define MX1_PAD_A20__A20			0x1c 0x004
-#define MX1_PAD_A20__GPIO1_28			0x1c 0x032
-#define MX1_PAD_A21__A21			0x1d 0x004
-#define MX1_PAD_A21__GPIO1_29			0x1d 0x032
-#define MX1_PAD_A22__A22			0x1e 0x004
-#define MX1_PAD_A22__GPIO1_30			0x1e 0x032
-#define MX1_PAD_A23__A23			0x1f 0x004
-#define MX1_PAD_A23__GPIO1_31			0x1f 0x032
-#define MX1_PAD_SD_DAT0__SD_DAT0		0x28 0x000
-#define MX1_PAD_SD_DAT0__MS_PI0			0x28 0x001
-#define MX1_PAD_SD_DAT0__GPIO2_8		0x28 0x032
-#define MX1_PAD_SD_DAT1__SD_DAT1		0x29 0x000
-#define MX1_PAD_SD_DAT1__MS_PI1			0x29 0x001
-#define MX1_PAD_SD_DAT1__GPIO2_9		0x29 0x032
-#define MX1_PAD_SD_DAT2__SD_DAT2		0x2a 0x000
-#define MX1_PAD_SD_DAT2__MS_SCLKI		0x2a 0x001
-#define MX1_PAD_SD_DAT2__GPIO2_10		0x2a 0x032
-#define MX1_PAD_SD_DAT3__SD_DAT3		0x2b 0x000
-#define MX1_PAD_SD_DAT3__MS_SDIO		0x2b 0x001
-#define MX1_PAD_SD_DAT3__GPIO2_11		0x2b 0x032
-#define MX1_PAD_SD_SCLK__SD_SCLK		0x2c 0x004
-#define MX1_PAD_SD_SCLK__MS_SCLKO		0x2c 0x005
-#define MX1_PAD_SD_SCLK__GPIO2_12		0x2c 0x032
-#define MX1_PAD_SD_CMD__SD_CMD			0x2d 0x000
-#define MX1_PAD_SD_CMD__MS_BS			0x2d 0x005
-#define MX1_PAD_SD_CMD__GPIO2_13		0x2d 0x032
-#define MX1_PAD_SIM_SVEN__SIM_SVEN		0x2e 0x004
-#define MX1_PAD_SIM_SVEN__SSI_RXFS		0x2e 0x001
-#define MX1_PAD_SIM_SVEN__GPIO2_14		0x2e 0x032
-#define MX1_PAD_SIM_PD__SIM_PD			0x2f 0x000
-#define MX1_PAD_SIM_PD__SSI_RXCLK		0x2f 0x001
-#define MX1_PAD_SIM_PD__GPIO2_15		0x2f 0x032
-#define MX1_PAD_SIM_TX__SIM_TX			0x30 0x000
-#define MX1_PAD_SIM_TX__SSI_RXDAT		0x30 0x001
-#define MX1_PAD_SIM_TX__GPIO2_16		0x30 0x032
-#define MX1_PAD_SIM_RX__SIM_RX			0x31 0x000
-#define MX1_PAD_SIM_RX__SSI_TXDAT		0x31 0x005
-#define MX1_PAD_SIM_RX__GPIO2_17		0x31 0x032
-#define MX1_PAD_SIM_RST__SIM_RST		0x32 0x004
-#define MX1_PAD_SIM_RST__SSI_TXFS		0x32 0x001
-#define MX1_PAD_SIM_RST__GPIO2_18		0x32 0x032
-#define MX1_PAD_SIM_CLK__SIM_CLK		0x33 0x004
-#define MX1_PAD_SIM_CLK__SSI_TXCLK		0x33 0x001
-#define MX1_PAD_SIM_CLK__GPIO2_19		0x33 0x032
-#define MX1_PAD_USBD_AFE__USBD_AFE		0x34 0x004
-#define MX1_PAD_USBD_AFE__GPIO2_20		0x34 0x032
-#define MX1_PAD_USBD_OE__USBD_OE		0x35 0x004
-#define MX1_PAD_USBD_OE__GPIO2_21		0x35 0x032
-#define MX1_PAD_USBD_RCV__USBD_RCV		0x36 0x000
-#define MX1_PAD_USBD_RCV__GPIO2_22		0x36 0x032
-#define MX1_PAD_USBD_SUSPND__USBD_SUSPND	0x37 0x004
-#define MX1_PAD_USBD_SUSPND__GPIO2_23		0x37 0x032
-#define MX1_PAD_USBD_VP__USBD_VP		0x38 0x000
-#define MX1_PAD_USBD_VP__GPIO2_24		0x38 0x032
-#define MX1_PAD_USBD_VM__USBD_VM		0x39 0x000
-#define MX1_PAD_USBD_VM__GPIO2_25		0x39 0x032
-#define MX1_PAD_USBD_VPO__USBD_VPO		0x3a 0x004
-#define MX1_PAD_USBD_VPO__GPIO2_26		0x3a 0x032
-#define MX1_PAD_USBD_VMO__USBD_VMO		0x3b 0x004
-#define MX1_PAD_USBD_VMO__GPIO2_27		0x3b 0x032
-#define MX1_PAD_UART2_CTS__UART2_CTS		0x3c 0x004
-#define MX1_PAD_UART2_CTS__GPIO2_28		0x3c 0x032
-#define MX1_PAD_UART2_RTS__UART2_RTS		0x3d 0x000
-#define MX1_PAD_UART2_RTS__GPIO2_29		0x3d 0x032
-#define MX1_PAD_UART2_TXD__UART2_TXD		0x3e 0x004
-#define MX1_PAD_UART2_TXD__GPIO2_30		0x3e 0x032
-#define MX1_PAD_UART2_RXD__UART2_RXD		0x3f 0x000
-#define MX1_PAD_UART2_RXD__GPIO2_31		0x3f 0x032
-#define MX1_PAD_SSI_RXFS__SSI_RXFS		0x43 0x000
-#define MX1_PAD_SSI_RXFS__GPIO3_3		0x43 0x032
-#define MX1_PAD_SSI_RXCLK__SSI_RXCLK		0x44 0x000
-#define MX1_PAD_SSI_RXCLK__GPIO3_4		0x44 0x032
-#define MX1_PAD_SSI_RXDAT__SSI_RXDAT		0x45 0x000
-#define MX1_PAD_SSI_RXDAT__GPIO3_5		0x45 0x032
-#define MX1_PAD_SSI_TXDAT__SSI_TXDAT		0x46 0x004
-#define MX1_PAD_SSI_TXDAT__GPIO3_6		0x46 0x032
-#define MX1_PAD_SSI_TXFS__SSI_TXFS		0x47 0x000
-#define MX1_PAD_SSI_TXFS__GPIO3_7		0x47 0x032
-#define MX1_PAD_SSI_TXCLK__SSI_TXCLK		0x48 0x000
-#define MX1_PAD_SSI_TXCLK__GPIO3_8		0x48 0x032
-#define MX1_PAD_UART1_CTS__UART1_CTS		0x49 0x004
-#define MX1_PAD_UART1_CTS__GPIO3_9		0x49 0x032
-#define MX1_PAD_UART1_RTS__UART1_RTS		0x4a 0x000
-#define MX1_PAD_UART1_RTS__GPIO3_10		0x4a 0x032
-#define MX1_PAD_UART1_TXD__UART1_TXD		0x4b 0x004
-#define MX1_PAD_UART1_TXD__GPIO3_11		0x4b 0x032
-#define MX1_PAD_UART1_RXD__UART1_RXD		0x4c 0x000
-#define MX1_PAD_UART1_RXD__GPIO3_12		0x4c 0x032
-#define MX1_PAD_SPI1_RDY__SPI1_RDY		0x4d 0x000
-#define MX1_PAD_SPI1_RDY__GPIO3_13		0x4d 0x032
-#define MX1_PAD_SPI1_SCLK__SPI1_SCLK		0x4e 0x004
-#define MX1_PAD_SPI1_SCLK__GPIO3_14		0x4e 0x032
-#define MX1_PAD_SPI1_SS__SPI1_SS		0x4f 0x000
-#define MX1_PAD_SPI1_SS__GPIO3_15		0x4f 0x032
-#define MX1_PAD_SPI1_MISO__SPI1_MISO		0x50 0x000
-#define MX1_PAD_SPI1_MISO__GPIO3_16		0x50 0x032
-#define MX1_PAD_SPI1_MOSI__SPI1_MOSI		0x51 0x004
-#define MX1_PAD_SPI1_MOSI__GPIO3_17		0x51 0x032
-#define MX1_PAD_BT13__BT13			0x53 0x004
-#define MX1_PAD_BT13__SSI2_RXCLK		0x53 0x001
-#define MX1_PAD_BT13__GPIO3_19			0x53 0x032
-#define MX1_PAD_BT12__BT12			0x54 0x004
-#define MX1_PAD_BT12__SSI2_TXFS			0x54 0x001
-#define MX1_PAD_BT12__GPIO3_20			0x54 0x032
-#define MX1_PAD_BT11__BT11			0x55 0x004
-#define MX1_PAD_BT11__SSI2_TXCLK		0x55 0x001
-#define MX1_PAD_BT11__GPIO3_21			0x55 0x032
-#define MX1_PAD_BT10__BT10			0x56 0x004
-#define MX1_PAD_BT10__SSI2_TX			0x56 0x001
-#define MX1_PAD_BT10__GPIO3_22			0x56 0x032
-#define MX1_PAD_BT9__BT9			0x57 0x004
-#define MX1_PAD_BT9__SSI2_RX			0x57 0x001
-#define MX1_PAD_BT9__GPIO3_23			0x57 0x032
-#define MX1_PAD_BT8__BT8			0x58 0x004
-#define MX1_PAD_BT8__SSI2_RXFS			0x58 0x001
-#define MX1_PAD_BT8__GPIO3_24			0x58 0x032
-#define MX1_PAD_BT8__UART3_RI			0x58 0x016
-#define MX1_PAD_BT7__BT7			0x59 0x004
-#define MX1_PAD_BT7__GPIO3_25			0x59 0x032
-#define MX1_PAD_BT7__UART3_DSR			0x59 0x016
-#define MX1_PAD_BT6__BT6			0x5a 0x004
-#define MX1_PAD_BT6__GPIO3_26			0x5a 0x032
-#define MX1_PAD_BT6__SPI2_SS3			0x5a 0x016
-#define MX1_PAD_BT6__UART3_DTR			0x5a 0x022
-#define MX1_PAD_BT5__BT5			0x5b 0x000
-#define MX1_PAD_BT5__GPIO3_27			0x5b 0x032
-#define MX1_PAD_BT5__UART3_DCD			0x5b 0x016
-#define MX1_PAD_BT4__BT4			0x5c 0x000
-#define MX1_PAD_BT4__GPIO3_28			0x5c 0x032
-#define MX1_PAD_BT4__UART3_CTS			0x5c 0x016
-#define MX1_PAD_BT3__BT3			0x5d 0x000
-#define MX1_PAD_BT3__GPIO3_29			0x5d 0x032
-#define MX1_PAD_BT3__UART3_RTS			0x5d 0x022
-#define MX1_PAD_BT2__BT2			0x5e 0x004
-#define MX1_PAD_BT2__GPIO3_30			0x5e 0x032
-#define MX1_PAD_BT2__UART3_TX			0x5e 0x016
-#define MX1_PAD_BT1__BT1			0x5f 0x000
-#define MX1_PAD_BT1__GPIO3_31			0x5f 0x032
-#define MX1_PAD_BT1__UART3_RX			0x5f 0x022
-#define MX1_PAD_LSCLK__LSCLK			0x66 0x004
-#define MX1_PAD_LSCLK__GPIO4_6			0x66 0x032
-#define MX1_PAD_REV__REV			0x67 0x004
-#define MX1_PAD_REV__UART2_DTR			0x67 0x001
-#define MX1_PAD_REV__GPIO4_7			0x67 0x032
-#define MX1_PAD_REV__SPI2_CLK			0x67 0x006
-#define MX1_PAD_CLS__CLS			0x68 0x004
-#define MX1_PAD_CLS__UART2_DCD			0x68 0x005
-#define MX1_PAD_CLS__GPIO4_8			0x68 0x032
-#define MX1_PAD_CLS__SPI2_SS			0x68 0x002
-#define MX1_PAD_PS__PS				0x69 0x004
-#define MX1_PAD_PS__UART2_RI			0x69 0x005
-#define MX1_PAD_PS__GPIO4_9			0x69 0x032
-#define MX1_PAD_PS__SPI2_RXD			0x69 0x022
-#define MX1_PAD_SPL_SPR__SPL_SPR		0x6a 0x004
-#define MX1_PAD_SPL_SPR__UART2_DSR		0x6a 0x005
-#define MX1_PAD_SPL_SPR__GPIO4_10		0x6a 0x032
-#define MX1_PAD_SPL_SPR__SPI2_TXD		0x6a 0x006
-#define MX1_PAD_CONTRAST__CONTRAST		0x6b 0x004
-#define MX1_PAD_CONTRAST__GPIO4_11		0x6b 0x032
-#define MX1_PAD_CONTRAST__SPI2_SS2		0x6b 0x012
-#define MX1_PAD_ACD_OE__ACD_OE			0x6c 0x004
-#define MX1_PAD_ACD_OE__GPIO4_12		0x6c 0x032
-#define MX1_PAD_LP_HSYNC__LP_HSYNC		0x6d 0x004
-#define MX1_PAD_LP_HSYNC__GPIO4_13		0x6d 0x032
-#define MX1_PAD_FLM_VSYNC__FLM_VSYNC		0x6e 0x004
-#define MX1_PAD_FLM_VSYNC__GPIO4_14		0x6e 0x032
-#define MX1_PAD_LD0__LD0			0x6f 0x004
-#define MX1_PAD_LD0__GPIO4_15			0x6f 0x032
-#define MX1_PAD_LD1__LD1			0x70 0x004
-#define MX1_PAD_LD1__GPIO4_16			0x70 0x032
-#define MX1_PAD_LD2__LD2			0x71 0x004
-#define MX1_PAD_LD2__GPIO4_17			0x71 0x032
-#define MX1_PAD_LD3__LD3			0x72 0x004
-#define MX1_PAD_LD3__GPIO4_18			0x72 0x032
-#define MX1_PAD_LD4__LD4			0x73 0x004
-#define MX1_PAD_LD4__GPIO4_19			0x73 0x032
-#define MX1_PAD_LD5__LD5			0x74 0x004
-#define MX1_PAD_LD5__GPIO4_20			0x74 0x032
-#define MX1_PAD_LD6__LD6			0x75 0x004
-#define MX1_PAD_LD6__GPIO4_21			0x75 0x032
-#define MX1_PAD_LD7__LD7			0x76 0x004
-#define MX1_PAD_LD7__GPIO4_22			0x76 0x032
-#define MX1_PAD_LD8__LD8			0x77 0x004
-#define MX1_PAD_LD8__GPIO4_23			0x77 0x032
-#define MX1_PAD_LD9__LD9			0x78 0x004
-#define MX1_PAD_LD9__GPIO4_24			0x78 0x032
-#define MX1_PAD_LD10__LD10			0x79 0x004
-#define MX1_PAD_LD10__GPIO4_25			0x79 0x032
-#define MX1_PAD_LD11__LD11			0x7a 0x004
-#define MX1_PAD_LD11__GPIO4_26			0x7a 0x032
-#define MX1_PAD_LD12__LD12			0x7b 0x004
-#define MX1_PAD_LD12__GPIO4_27			0x7b 0x032
-#define MX1_PAD_LD13__LD13			0x7c 0x004
-#define MX1_PAD_LD13__GPIO4_28			0x7c 0x032
-#define MX1_PAD_LD14__LD14			0x7d 0x004
-#define MX1_PAD_LD14__GPIO4_29			0x7d 0x032
-#define MX1_PAD_LD15__LD15			0x7e 0x004
-#define MX1_PAD_LD15__GPIO4_30			0x7e 0x032
-#define MX1_PAD_TMR2OUT__TMR2OUT		0x7f 0x000
-#define MX1_PAD_TMR2OUT__GPIO4_31		0x7f 0x032
-#define MX1_PAD_TMR2OUT__SPI2_TXD		0x7f 0x006
-
-#endif
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
deleted file mode 100644
index e312f1e74e2fe..0000000000000
--- a/arch/arm/boot/dts/imx1.dtsi
+++ /dev/null
@@ -1,276 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
-
-#include "imx1-pinfunc.h"
-
-#include <dt-bindings/clock/imx1-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		i2c0 = &i2c;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		spi0 = &cspi1;
-		spi1 = &cspi2;
-	};
-
-	aitc: aitc-interrupt-controller@223000 {
-		compatible = "fsl,imx1-aitc", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x00223000 0x1000>;
-	};
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		cpu@0 {
-			device_type = "cpu";
-			reg = <0>;
-			compatible = "arm,arm920t";
-			operating-points = <200000 1900000>;
-			clock-latency = <62500>;
-			clocks = <&clks IMX1_CLK_MCU>;
-			voltage-tolerance = <5>;
-		};
-	};
-
-	clocks {
-		clk32 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32000>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&aitc>;
-		ranges;
-
-		aipi@200000 {
-			compatible = "fsl,aipi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x00200000 0x10000>;
-			ranges;
-
-			gpt1: timer@202000 {
-				compatible = "fsl,imx1-gpt";
-				reg = <0x00202000 0x1000>;
-				interrupts = <59>;
-				clocks = <&clks IMX1_CLK_HCLK>,
-					 <&clks IMX1_CLK_PER1>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt2: timer@203000 {
-				compatible = "fsl,imx1-gpt";
-				reg = <0x00203000 0x1000>;
-				interrupts = <58>;
-				clocks = <&clks IMX1_CLK_HCLK>,
-					 <&clks IMX1_CLK_PER1>;
-				clock-names = "ipg", "per";
-			};
-
-			fb: fb@205000 {
-				compatible = "fsl,imx1-fb";
-				reg = <0x00205000 0x1000>;
-				interrupts = <14>;
-				clocks = <&clks IMX1_CLK_DUMMY>,
-					 <&clks IMX1_CLK_DUMMY>,
-					 <&clks IMX1_CLK_PER2>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			uart1: serial@206000 {
-				compatible = "fsl,imx1-uart";
-				reg = <0x00206000 0x1000>;
-				interrupts = <30 29 26>;
-				clocks = <&clks IMX1_CLK_HCLK>,
-					 <&clks IMX1_CLK_PER1>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@207000 {
-				compatible = "fsl,imx1-uart";
-				reg = <0x00207000 0x1000>;
-				interrupts = <24 23 20>;
-				clocks = <&clks IMX1_CLK_HCLK>,
-					 <&clks IMX1_CLK_PER1>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			pwm: pwm@208000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx1-pwm";
-				reg = <0x00208000 0x1000>;
-				interrupts = <34>;
-				clocks = <&clks IMX1_CLK_DUMMY>,
-					 <&clks IMX1_CLK_PER1>;
-				clock-names = "ipg", "per";
-			};
-
-			dma: dma@209000 {
-				compatible = "fsl,imx1-dma";
-				reg = <0x00209000 0x1000>;
-				interrupts = <61 60>;
-				clocks = <&clks IMX1_CLK_HCLK>,
-					 <&clks IMX1_CLK_DMA_GATE>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <1>;
-			};
-
-			uart3: serial@20a000 {
-				compatible = "fsl,imx1-uart";
-				reg = <0x0020a000 0x1000>;
-				interrupts = <54 4 1>;
-				clocks = <&clks IMX1_CLK_UART3_GATE>,
-					 <&clks IMX1_CLK_PER1>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-
-		aipi@210000 {
-			compatible = "fsl,aipi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x00210000 0x10000>;
-			ranges;
-
-			cspi1: spi@213000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx1-cspi";
-				reg = <0x00213000 0x1000>;
-				interrupts = <41>;
-				clocks = <&clks IMX1_CLK_DUMMY>,
-					 <&clks IMX1_CLK_PER1>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c: i2c@217000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx1-i2c";
-				reg = <0x00217000 0x1000>;
-				interrupts = <39>;
-				clocks = <&clks IMX1_CLK_HCLK>;
-				status = "disabled";
-			};
-
-			cspi2: spi@219000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx1-cspi";
-				reg = <0x00219000 0x1000>;
-				interrupts = <40>;
-				clocks = <&clks IMX1_CLK_DUMMY>,
-					 <&clks IMX1_CLK_PER1>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			clks: ccm@21b000 {
-				compatible = "fsl,imx1-ccm";
-				reg = <0x0021b000 0x1000>;
-				#clock-cells = <1>;
-			};
-
-			iomuxc: iomuxc@21c000 {
-				compatible = "fsl,imx1-iomuxc";
-				reg = <0x0021c000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges;
-
-				gpio1: gpio@21c000 {
-					compatible = "fsl,imx1-gpio";
-					reg = <0x0021c000 0x100>;
-					interrupts = <11>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio2: gpio@21c100 {
-					compatible = "fsl,imx1-gpio";
-					reg = <0x0021c100 0x100>;
-					interrupts = <12>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio3: gpio@21c200 {
-					compatible = "fsl,imx1-gpio";
-					reg = <0x0021c200 0x100>;
-					interrupts = <13>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio4: gpio@21c300 {
-					compatible = "fsl,imx1-gpio";
-					reg = <0x0021c300 0x100>;
-					interrupts = <62>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-			};
-		};
-
-		weim: weim@220000 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			compatible = "fsl,imx1-weim";
-			reg = <0x00220000 0x1000>;
-			clocks = <&clks IMX1_CLK_DUMMY>;
-			ranges = <
-				0 0 0x10000000 0x02000000
-				1 0 0x12000000 0x01000000
-				2 0 0x13000000 0x01000000
-				3 0 0x14000000 0x01000000
-				4 0 0x15000000 0x01000000
-				5 0 0x16000000 0x01000000
-			>;
-			status = "disabled";
-		};
-
-		esram: esram@300000 {
-			compatible = "mmio-sram";
-			reg = <0x00300000 0x20000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
deleted file mode 100644
index 3b609d987d883..0000000000000
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-#include "imx23.dtsi"
-
-/ {
-	model = "Freescale i.MX23 Evaluation Kit";
-	compatible = "fsl,imx23-evk", "fsl,imx23";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	reg_vddio_sd0: regulator-vddio-sd0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 29 0>;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 18 0>;
-		enable-active-high;
-	};
-
-	reg_lcd_5v: regulator-lcd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
-				status = "okay";
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <4>;
-				wp-gpios = <&gpio1 30 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_LCD_RESET__GPIO_1_18
-						MX23_PAD_PWM3__GPIO_1_29
-						MX23_PAD_PWM4__GPIO_1_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a>;
-				status = "okay";
-
-				port {
-					display_out: endpoint {
-						remote-endpoint = <&panel_in>;
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-		};
-	};
-
-	backlight_display: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
deleted file mode 100644
index 0729e72f22832..0000000000000
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx23.dtsi"
-
-/ {
-	model = "i.MX23 Olinuxino Low Cost Board";
-	compatible = "olimex,imx23-olinuxino", "fsl,imx23";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
-				bus-width = <4>;
-				broken-cd;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_ALE__GPIO_0_17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio2_1: led_gpio2_1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DETECT__GPIO_2_1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			ssp1: spi@80034000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx23-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c_pins_b>;
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			dr_mode = "host";
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
-			gpio = <&gpio0 17 0>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio2_1>;
-
-		user {
-			label = "green";
-			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx23-pinfunc.h b/arch/arm/boot/dts/imx23-pinfunc.h
deleted file mode 100644
index 468c079f3c2b2..0000000000000
--- a/arch/arm/boot/dts/imx23-pinfunc.h
+++ /dev/null
@@ -1,327 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Header providing constants for i.MX23 pinctrl bindings.
- *
- * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- */
-
-#ifndef __DT_BINDINGS_MX23_PINCTRL_H__
-#define __DT_BINDINGS_MX23_PINCTRL_H__
-
-#include "mxs-pinfunc.h"
-
-#define MX23_PAD_GPMI_D00__GPMI_D00			0x0000
-#define MX23_PAD_GPMI_D01__GPMI_D01			0x0010
-#define MX23_PAD_GPMI_D02__GPMI_D02			0x0020
-#define MX23_PAD_GPMI_D03__GPMI_D03			0x0030
-#define MX23_PAD_GPMI_D04__GPMI_D04			0x0040
-#define MX23_PAD_GPMI_D05__GPMI_D05			0x0050
-#define MX23_PAD_GPMI_D06__GPMI_D06			0x0060
-#define MX23_PAD_GPMI_D07__GPMI_D07			0x0070
-#define MX23_PAD_GPMI_D08__GPMI_D08			0x0080
-#define MX23_PAD_GPMI_D09__GPMI_D09			0x0090
-#define MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
-#define MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
-#define MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
-#define MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
-#define MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
-#define MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
-#define MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
-#define MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
-#define MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
-#define MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
-#define MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
-#define MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
-#define MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
-#define MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
-#define MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
-#define MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
-#define MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
-#define MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
-#define MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
-#define MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
-#define MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
-#define MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
-#define MX23_PAD_LCD_D00__LCD_D00			0x1000
-#define MX23_PAD_LCD_D01__LCD_D01			0x1010
-#define MX23_PAD_LCD_D02__LCD_D02			0x1020
-#define MX23_PAD_LCD_D03__LCD_D03			0x1030
-#define MX23_PAD_LCD_D04__LCD_D04			0x1040
-#define MX23_PAD_LCD_D05__LCD_D05			0x1050
-#define MX23_PAD_LCD_D06__LCD_D06			0x1060
-#define MX23_PAD_LCD_D07__LCD_D07			0x1070
-#define MX23_PAD_LCD_D08__LCD_D08			0x1080
-#define MX23_PAD_LCD_D09__LCD_D09			0x1090
-#define MX23_PAD_LCD_D10__LCD_D10			0x10a0
-#define MX23_PAD_LCD_D11__LCD_D11			0x10b0
-#define MX23_PAD_LCD_D12__LCD_D12			0x10c0
-#define MX23_PAD_LCD_D13__LCD_D13			0x10d0
-#define MX23_PAD_LCD_D14__LCD_D14			0x10e0
-#define MX23_PAD_LCD_D15__LCD_D15			0x10f0
-#define MX23_PAD_LCD_D16__LCD_D16			0x1100
-#define MX23_PAD_LCD_D17__LCD_D17			0x1110
-#define MX23_PAD_LCD_RESET__LCD_RESET			0x1120
-#define MX23_PAD_LCD_RS__LCD_RS				0x1130
-#define MX23_PAD_LCD_WR__LCD_WR				0x1140
-#define MX23_PAD_LCD_CS__LCD_CS				0x1150
-#define MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
-#define MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
-#define MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
-#define MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
-#define MX23_PAD_PWM0__PWM0				0x11a0
-#define MX23_PAD_PWM1__PWM1				0x11b0
-#define MX23_PAD_PWM2__PWM2				0x11c0
-#define MX23_PAD_PWM3__PWM3				0x11d0
-#define MX23_PAD_PWM4__PWM4				0x11e0
-#define MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
-#define MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
-#define MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
-#define MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
-#define MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
-#define MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
-#define MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
-#define MX23_PAD_ROTARYA__ROTARYA			0x2070
-#define MX23_PAD_ROTARYB__ROTARYB			0x2080
-#define MX23_PAD_EMI_A00__EMI_A00			0x2090
-#define MX23_PAD_EMI_A01__EMI_A01			0x20a0
-#define MX23_PAD_EMI_A02__EMI_A02			0x20b0
-#define MX23_PAD_EMI_A03__EMI_A03			0x20c0
-#define MX23_PAD_EMI_A04__EMI_A04			0x20d0
-#define MX23_PAD_EMI_A05__EMI_A05			0x20e0
-#define MX23_PAD_EMI_A06__EMI_A06			0x20f0
-#define MX23_PAD_EMI_A07__EMI_A07			0x2100
-#define MX23_PAD_EMI_A08__EMI_A08			0x2110
-#define MX23_PAD_EMI_A09__EMI_A09			0x2120
-#define MX23_PAD_EMI_A10__EMI_A10			0x2130
-#define MX23_PAD_EMI_A11__EMI_A11			0x2140
-#define MX23_PAD_EMI_A12__EMI_A12			0x2150
-#define MX23_PAD_EMI_BA0__EMI_BA0			0x2160
-#define MX23_PAD_EMI_BA1__EMI_BA1			0x2170
-#define MX23_PAD_EMI_CASN__EMI_CASN			0x2180
-#define MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
-#define MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
-#define MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
-#define MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
-#define MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
-#define MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
-#define MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
-#define MX23_PAD_EMI_D00__EMI_D00			0x3000
-#define MX23_PAD_EMI_D01__EMI_D01			0x3010
-#define MX23_PAD_EMI_D02__EMI_D02			0x3020
-#define MX23_PAD_EMI_D03__EMI_D03			0x3030
-#define MX23_PAD_EMI_D04__EMI_D04			0x3040
-#define MX23_PAD_EMI_D05__EMI_D05			0x3050
-#define MX23_PAD_EMI_D06__EMI_D06			0x3060
-#define MX23_PAD_EMI_D07__EMI_D07			0x3070
-#define MX23_PAD_EMI_D08__EMI_D08			0x3080
-#define MX23_PAD_EMI_D09__EMI_D09			0x3090
-#define MX23_PAD_EMI_D10__EMI_D10			0x30a0
-#define MX23_PAD_EMI_D11__EMI_D11			0x30b0
-#define MX23_PAD_EMI_D12__EMI_D12			0x30c0
-#define MX23_PAD_EMI_D13__EMI_D13			0x30d0
-#define MX23_PAD_EMI_D14__EMI_D14			0x30e0
-#define MX23_PAD_EMI_D15__EMI_D15			0x30f0
-#define MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
-#define MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
-#define MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
-#define MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
-#define MX23_PAD_EMI_CLK__EMI_CLK			0x3140
-#define MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
-#define MX23_PAD_GPMI_D00__LCD_D8			0x0001
-#define MX23_PAD_GPMI_D01__LCD_D9			0x0011
-#define MX23_PAD_GPMI_D02__LCD_D10			0x0021
-#define MX23_PAD_GPMI_D03__LCD_D11			0x0031
-#define MX23_PAD_GPMI_D04__LCD_D12			0x0041
-#define MX23_PAD_GPMI_D05__LCD_D13			0x0051
-#define MX23_PAD_GPMI_D06__LCD_D14			0x0061
-#define MX23_PAD_GPMI_D07__LCD_D15			0x0071
-#define MX23_PAD_GPMI_D08__LCD_D18			0x0081
-#define MX23_PAD_GPMI_D09__LCD_D19			0x0091
-#define MX23_PAD_GPMI_D10__LCD_D20			0x00a1
-#define MX23_PAD_GPMI_D11__LCD_D21			0x00b1
-#define MX23_PAD_GPMI_D12__LCD_D22			0x00c1
-#define MX23_PAD_GPMI_D13__LCD_D23			0x00d1
-#define MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
-#define MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
-#define MX23_PAD_GPMI_CLE__LCD_D16			0x0101
-#define MX23_PAD_GPMI_ALE__LCD_D17			0x0111
-#define MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
-#define MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
-#define MX23_PAD_AUART1_RX__IR_RX			0x01c1
-#define MX23_PAD_AUART1_TX__IR_TX			0x01d1
-#define MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
-#define MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
-#define MX23_PAD_LCD_D00__ETM_DA8			0x1001
-#define MX23_PAD_LCD_D01__ETM_DA9			0x1011
-#define MX23_PAD_LCD_D02__ETM_DA10			0x1021
-#define MX23_PAD_LCD_D03__ETM_DA11			0x1031
-#define MX23_PAD_LCD_D04__ETM_DA12			0x1041
-#define MX23_PAD_LCD_D05__ETM_DA13			0x1051
-#define MX23_PAD_LCD_D06__ETM_DA14			0x1061
-#define MX23_PAD_LCD_D07__ETM_DA15			0x1071
-#define MX23_PAD_LCD_D08__ETM_DA0			0x1081
-#define MX23_PAD_LCD_D09__ETM_DA1			0x1091
-#define MX23_PAD_LCD_D10__ETM_DA2			0x10a1
-#define MX23_PAD_LCD_D11__ETM_DA3			0x10b1
-#define MX23_PAD_LCD_D12__ETM_DA4			0x10c1
-#define MX23_PAD_LCD_D13__ETM_DA5			0x10d1
-#define MX23_PAD_LCD_D14__ETM_DA6			0x10e1
-#define MX23_PAD_LCD_D15__ETM_DA7			0x10f1
-#define MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
-#define MX23_PAD_LCD_RS__ETM_TCLK			0x1131
-#define MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
-#define MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
-#define MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
-#define MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
-#define MX23_PAD_PWM0__ROTARYA				0x11a1
-#define MX23_PAD_PWM1__ROTARYB				0x11b1
-#define MX23_PAD_PWM2__GPMI_RDY3			0x11c1
-#define MX23_PAD_PWM3__ETM_TCTL				0x11d1
-#define MX23_PAD_PWM4__ETM_TCLK				0x11e1
-#define MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
-#define MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
-#define MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
-#define MX23_PAD_ROTARYA__AUART2_RTS			0x2071
-#define MX23_PAD_ROTARYB__AUART2_CTS			0x2081
-#define MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
-#define MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
-#define MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
-#define MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
-#define MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
-#define MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
-#define MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
-#define MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
-#define MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
-#define MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
-#define MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
-#define MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
-#define MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
-#define MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
-#define MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
-#define MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
-#define MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
-#define MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
-#define MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
-#define MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
-#define MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
-#define MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
-#define MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
-#define MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
-#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
-#define MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
-#define MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
-#define MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
-#define MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
-#define MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
-#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
-#define MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
-#define MX23_PAD_PWM0__DUART_RX				0x11a2
-#define MX23_PAD_PWM1__DUART_TX				0x11b2
-#define MX23_PAD_PWM3__AUART1_CTS			0x11d2
-#define MX23_PAD_PWM4__AUART1_RTS			0x11e2
-#define MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
-#define MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
-#define MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
-#define MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
-#define MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
-#define MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
-#define MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
-#define MX23_PAD_ROTARYA__SPDIF				0x2072
-#define MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
-#define MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
-#define MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
-#define MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
-#define MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
-#define MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
-#define MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
-#define MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
-#define MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
-#define MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
-#define MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
-#define MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
-#define MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
-#define MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
-#define MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
-#define MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
-#define MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
-#define MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
-#define MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
-#define MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
-#define MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
-#define MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
-#define MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
-#define MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
-#define MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
-#define MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
-#define MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
-#define MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
-#define MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
-#define MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
-#define MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
-#define MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
-#define MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
-#define MX23_PAD_LCD_D00__GPIO_1_0			0x1003
-#define MX23_PAD_LCD_D01__GPIO_1_1			0x1013
-#define MX23_PAD_LCD_D02__GPIO_1_2			0x1023
-#define MX23_PAD_LCD_D03__GPIO_1_3			0x1033
-#define MX23_PAD_LCD_D04__GPIO_1_4			0x1043
-#define MX23_PAD_LCD_D05__GPIO_1_5			0x1053
-#define MX23_PAD_LCD_D06__GPIO_1_6			0x1063
-#define MX23_PAD_LCD_D07__GPIO_1_7			0x1073
-#define MX23_PAD_LCD_D08__GPIO_1_8			0x1083
-#define MX23_PAD_LCD_D09__GPIO_1_9			0x1093
-#define MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
-#define MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
-#define MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
-#define MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
-#define MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
-#define MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
-#define MX23_PAD_LCD_D16__GPIO_1_16			0x1103
-#define MX23_PAD_LCD_D17__GPIO_1_17			0x1113
-#define MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
-#define MX23_PAD_LCD_RS__GPIO_1_19			0x1133
-#define MX23_PAD_LCD_WR__GPIO_1_20			0x1143
-#define MX23_PAD_LCD_CS__GPIO_1_21			0x1153
-#define MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
-#define MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
-#define MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
-#define MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
-#define MX23_PAD_PWM0__GPIO_1_26			0x11a3
-#define MX23_PAD_PWM1__GPIO_1_27			0x11b3
-#define MX23_PAD_PWM2__GPIO_1_28			0x11c3
-#define MX23_PAD_PWM3__GPIO_1_29			0x11d3
-#define MX23_PAD_PWM4__GPIO_1_30			0x11e3
-#define MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
-#define MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
-#define MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
-#define MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
-#define MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
-#define MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
-#define MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
-#define MX23_PAD_ROTARYA__GPIO_2_7			0x2073
-#define MX23_PAD_ROTARYB__GPIO_2_8			0x2083
-#define MX23_PAD_EMI_A00__GPIO_2_9			0x2093
-#define MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
-#define MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
-#define MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
-#define MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
-#define MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
-#define MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
-#define MX23_PAD_EMI_A07__GPIO_2_16			0x2103
-#define MX23_PAD_EMI_A08__GPIO_2_17			0x2113
-#define MX23_PAD_EMI_A09__GPIO_2_18			0x2123
-#define MX23_PAD_EMI_A10__GPIO_2_19			0x2133
-#define MX23_PAD_EMI_A11__GPIO_2_20			0x2143
-#define MX23_PAD_EMI_A12__GPIO_2_21			0x2153
-#define MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
-#define MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
-#define MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
-#define MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
-#define MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
-#define MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
-#define MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
-#define MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
-#define MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
-#define MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
-
-#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts
deleted file mode 100644
index 46057d9bf555b..0000000000000
--- a/arch/arm/boot/dts/imx23-sansa.dts
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx23.dtsi"
-
-/ {
-	model = "SanDisk Sansa Fuze+";
-	compatible = "sandisk,sansa_fuze_plus", "fsl,imx23";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				cd-inverted;
-				status = "okay";
-			};
-
-			ssp1: spi@80034000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc1_8bit_pins_a>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_vddio_sd1>;
-				non-removable;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_D08__GPIO_0_8
-						MX23_PAD_PWM3__GPIO_1_29
-						MX23_PAD_AUART1_RTS__GPIO_0_27
-						MX23_PAD_AUART1_CTS__GPIO_0_26
-						MX23_PAD_I2C_SCL__I2C_SCL
-						MX23_PAD_I2C_SDA__I2C_SDA
-						MX23_PAD_LCD_DOTCK__GPIO_1_22
-						MX23_PAD_LCD_HSYNC__GPIO_1_24
-						MX23_PAD_PWM3__GPIO_1_29
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			dr_mode = "peripheral";
-			status = "okay";
-		};
-	};
-
-	reg_vddio_sd0: regulator-vddio-sd0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio0 8 0>;
-	};
-
-	reg_vddio_sd1: regulator-vddio-sd1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddio-sd1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 29 0>;
-	};
-
-	reg_vdd_touchpad: regulator-vdd-touchpad0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-touchpad0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio0 26 GPIO_ACTIVE_LOW>;
-		regulator-always-on;
-	};
-
-	reg_vdd_tuner: regulator-vdd-tuner0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-tuner0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		regulator-always-on;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	i2c-0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		gpios = <
-			&gpio1 24 0		/* SDA */
-			&gpio1 22 0		/* SCL */
-		>;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-	};
-
-	i2c-1 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		gpios = <
-			&gpio0 31 0		/* SDA */
-			&gpio0 30 0		/* SCL */
-		>;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-
-		touch: touch@20 {
-			compatible = "synaptics,synaptics_i2c";
-			reg = <0x20>;
-		};
-
-		eeprom: eeprom@50 {
-			compatible = "atmel,24c64";
-			reg = <0x50>;
-			pagesize = <32>;
-		};
-	};
-
-};
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
deleted file mode 100644
index da4b88f32eaa4..0000000000000
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- */
-
-/dts-v1/;
-#include "imx23.dtsi"
-
-/ {
-	model = "Freescale STMP378x Development Board";
-	compatible = "fsl,stmp378x-devb", "fsl,imx23";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <4>;
-				wp-gpios = <&gpio1 30 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_PWM3__GPIO_1_29
-						MX23_PAD_PWM4__GPIO_1_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			auart0: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_vddio_sd0: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 29 0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts
deleted file mode 100644
index b1d8210f3ecc8..0000000000000
--- a/arch/arm/boot/dts/imx23-xfi3.dts
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- */
-
-/dts-v1/;
-#include "imx23.dtsi"
-
-/ {
-	model = "Creative ZEN X-Fi3";
-	compatible = "creative,x-fi3", "fsl,imx23";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				cd-inverted;
-				status = "okay";
-			};
-
-			ssp1: spi@80034000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc1_4bit_pins_a>;
-				bus-width = <4>;
-				non-removable;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-				key_pins_a: keys@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_ROTARYA__GPIO_2_7
-						MX23_PAD_ROTARYB__GPIO_2_8
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			i2c: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c_pins_a>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_2pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			dr_mode = "peripheral";
-			status = "okay";
-		};
-	};
-
-	reg_vddio_sd0: regulator-vddio-sd0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio0 7 0>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&key_pins_a>;
-
-		key-voldown {
-			label = "volume-down";
-			linux,code = <114>;
-			gpios = <&gpio2 7 0>;
-			debounce-interval = <20>;
-		};
-
-		key-volup {
-			label = "volume-up";
-			linux,code = <115>;
-			gpios = <&gpio2 8 0>;
-			debounce-interval = <20>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
deleted file mode 100644
index d19508c8f9ed6..0000000000000
--- a/arch/arm/boot/dts/imx23.dtsi
+++ /dev/null
@@ -1,634 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-
-#include "imx23-pinfunc.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&icoll>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		serial0 = &auart0;
-		serial1 = &auart1;
-		spi0 = &ssp0;
-		spi1 = &ssp1;
-		usbphy0 = &usbphy0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	apb@80000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80000000 0x80000>;
-		ranges;
-
-		apbh@80000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x40000>;
-			ranges;
-
-			icoll: interrupt-controller@80000000 {
-				compatible = "fsl,imx23-icoll", "fsl,icoll";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x80000000 0x2000>;
-			};
-
-			dma_apbh: dma-apbh@80004000 {
-				compatible = "fsl,imx23-dma-apbh";
-				reg = <0x80004000 0x2000>;
-				interrupts = <0 14 20 0
-					      13 13 13 13>;
-				#dma-cells = <1>;
-				dma-channels = <8>;
-				clocks = <&clks 15>;
-			};
-
-			ecc@80008000 {
-				reg = <0x80008000 0x2000>;
-				status = "disabled";
-			};
-
-			nand-controller@8000c000 {
-				compatible = "fsl,imx23-gpmi-nand";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
-				reg-names = "gpmi-nand", "bch";
-				interrupts = <56>;
-				interrupt-names = "bch";
-				clocks = <&clks 34>;
-				clock-names = "gpmi_io";
-				dmas = <&dma_apbh 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp0: spi@80010000 {
-				reg = <0x80010000 0x2000>;
-				interrupts = <15>;
-				clocks = <&clks 33>;
-				dmas = <&dma_apbh 1>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			etm@80014000 {
-				reg = <0x80014000 0x2000>;
-				status = "disabled";
-			};
-
-			pinctrl@80018000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx23-pinctrl", "simple-bus";
-				reg = <0x80018000 0x2000>;
-
-				gpio0: gpio@0 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
-					reg = <0>;
-					interrupts = <16>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio1: gpio@1 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
-					reg = <1>;
-					interrupts = <17>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio2: gpio@2 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
-					reg = <2>;
-					interrupts = <18>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				duart_pins_a: duart@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_PWM0__DUART_RX
-						MX23_PAD_PWM1__DUART_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart0_pins_a: auart0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_AUART1_RX__AUART1_RX
-						MX23_PAD_AUART1_TX__AUART1_TX
-						MX23_PAD_AUART1_CTS__AUART1_CTS
-						MX23_PAD_AUART1_RTS__AUART1_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart0_2pins_a: auart0-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_I2C_SCL__AUART1_TX
-						MX23_PAD_I2C_SDA__AUART1_RX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart1_2pins_a: auart1-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_D14__AUART2_RX
-						MX23_PAD_GPMI_D15__AUART2_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_a: gpmi-nand@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_D00__GPMI_D00
-						MX23_PAD_GPMI_D01__GPMI_D01
-						MX23_PAD_GPMI_D02__GPMI_D02
-						MX23_PAD_GPMI_D03__GPMI_D03
-						MX23_PAD_GPMI_D04__GPMI_D04
-						MX23_PAD_GPMI_D05__GPMI_D05
-						MX23_PAD_GPMI_D06__GPMI_D06
-						MX23_PAD_GPMI_D07__GPMI_D07
-						MX23_PAD_GPMI_CLE__GPMI_CLE
-						MX23_PAD_GPMI_ALE__GPMI_ALE
-						MX23_PAD_GPMI_RDY0__GPMI_RDY0
-						MX23_PAD_GPMI_RDY1__GPMI_RDY1
-						MX23_PAD_GPMI_WPN__GPMI_WPN
-						MX23_PAD_GPMI_WRN__GPMI_WRN
-						MX23_PAD_GPMI_RDN__GPMI_RDN
-						MX23_PAD_GPMI_CE1N__GPMI_CE1N
-						MX23_PAD_GPMI_CE0N__GPMI_CE0N
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_fixup: gpmi-pins-fixup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_WPN__GPMI_WPN
-						MX23_PAD_GPMI_WRN__GPMI_WRN
-						MX23_PAD_GPMI_RDN__GPMI_RDN
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-				};
-
-				mmc0_4bit_pins_a: mmc0-4bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DATA0__SSP1_DATA0
-						MX23_PAD_SSP1_DATA1__SSP1_DATA1
-						MX23_PAD_SSP1_DATA2__SSP1_DATA2
-						MX23_PAD_SSP1_DATA3__SSP1_DATA3
-						MX23_PAD_SSP1_CMD__SSP1_CMD
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_8bit_pins_a: mmc0-8bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DATA0__SSP1_DATA0
-						MX23_PAD_SSP1_DATA1__SSP1_DATA1
-						MX23_PAD_SSP1_DATA2__SSP1_DATA2
-						MX23_PAD_SSP1_DATA3__SSP1_DATA3
-						MX23_PAD_GPMI_D08__SSP1_DATA4
-						MX23_PAD_GPMI_D09__SSP1_DATA5
-						MX23_PAD_GPMI_D10__SSP1_DATA6
-						MX23_PAD_GPMI_D11__SSP1_DATA7
-						MX23_PAD_SSP1_CMD__SSP1_CMD
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_pins_fixup: mmc0-pins-fixup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc0_sck_cfg: mmc0-sck-cfg@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc1_4bit_pins_a: mmc1-4bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_D00__SSP2_DATA0
-						MX23_PAD_GPMI_D01__SSP2_DATA1
-						MX23_PAD_GPMI_D02__SSP2_DATA2
-						MX23_PAD_GPMI_D03__SSP2_DATA3
-						MX23_PAD_GPMI_RDY1__SSP2_CMD
-						MX23_PAD_GPMI_WRN__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc1_8bit_pins_a: mmc1-8bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_D00__SSP2_DATA0
-						MX23_PAD_GPMI_D01__SSP2_DATA1
-						MX23_PAD_GPMI_D02__SSP2_DATA2
-						MX23_PAD_GPMI_D03__SSP2_DATA3
-						MX23_PAD_GPMI_D04__SSP2_DATA4
-						MX23_PAD_GPMI_D05__SSP2_DATA5
-						MX23_PAD_GPMI_D06__SSP2_DATA6
-						MX23_PAD_GPMI_D07__SSP2_DATA7
-						MX23_PAD_GPMI_RDY1__SSP2_CMD
-						MX23_PAD_GPMI_WRN__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				pwm2_pins_a: pwm2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_PWM2__PWM2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_24bit_pins_a: lcdif-24bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_LCD_D00__LCD_D00
-						MX23_PAD_LCD_D01__LCD_D01
-						MX23_PAD_LCD_D02__LCD_D02
-						MX23_PAD_LCD_D03__LCD_D03
-						MX23_PAD_LCD_D04__LCD_D04
-						MX23_PAD_LCD_D05__LCD_D05
-						MX23_PAD_LCD_D06__LCD_D06
-						MX23_PAD_LCD_D07__LCD_D07
-						MX23_PAD_LCD_D08__LCD_D08
-						MX23_PAD_LCD_D09__LCD_D09
-						MX23_PAD_LCD_D10__LCD_D10
-						MX23_PAD_LCD_D11__LCD_D11
-						MX23_PAD_LCD_D12__LCD_D12
-						MX23_PAD_LCD_D13__LCD_D13
-						MX23_PAD_LCD_D14__LCD_D14
-						MX23_PAD_LCD_D15__LCD_D15
-						MX23_PAD_LCD_D16__LCD_D16
-						MX23_PAD_LCD_D17__LCD_D17
-						MX23_PAD_GPMI_D08__LCD_D18
-						MX23_PAD_GPMI_D09__LCD_D19
-						MX23_PAD_GPMI_D10__LCD_D20
-						MX23_PAD_GPMI_D11__LCD_D21
-						MX23_PAD_GPMI_D12__LCD_D22
-						MX23_PAD_GPMI_D13__LCD_D23
-						MX23_PAD_LCD_DOTCK__LCD_DOTCK
-						MX23_PAD_LCD_ENABLE__LCD_ENABLE
-						MX23_PAD_LCD_HSYNC__LCD_HSYNC
-						MX23_PAD_LCD_VSYNC__LCD_VSYNC
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				spi2_pins_a: spi2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_WRN__SSP2_SCK
-						MX23_PAD_GPMI_RDY1__SSP2_CMD
-						MX23_PAD_GPMI_D00__SSP2_DATA0
-						MX23_PAD_GPMI_D03__SSP2_DATA3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				i2c_pins_a: i2c@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_I2C_SCL__I2C_SCL
-						MX23_PAD_I2C_SDA__I2C_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				i2c_pins_b: i2c@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX23_PAD_LCD_ENABLE__I2C_SCL
-						MX23_PAD_LCD_HSYNC__I2C_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				i2c_pins_c: i2c@2 {
-					reg = <2>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DATA1__I2C_SCL
-						MX23_PAD_SSP1_DATA2__I2C_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			digctl@8001c000 {
-				compatible = "fsl,imx23-digctl";
-				reg = <0x8001c000 2000>;
-				status = "disabled";
-			};
-
-			emi@80020000 {
-				reg = <0x80020000 0x2000>;
-				status = "disabled";
-			};
-
-			dma_apbx: dma-apbx@80024000 {
-				compatible = "fsl,imx23-dma-apbx";
-				reg = <0x80024000 0x2000>;
-				interrupts = <7 5 9 26
-					      19 0 25 23
-					      60 58 9 0
-					      0 0 0 0>;
-				interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
-						  "saif0", "empty", "auart0-rx", "auart0-tx",
-						  "auart1-rx", "auart1-tx", "saif1", "empty",
-						  "empty", "empty", "empty", "empty";
-				#dma-cells = <1>;
-				dma-channels = <16>;
-				clocks = <&clks 16>;
-			};
-
-			dcp: crypto@80028000 {
-				compatible = "fsl,imx23-dcp";
-				reg = <0x80028000 0x2000>;
-				interrupts = <53 54>;
-				status = "okay";
-			};
-
-			pxp@8002a000 {
-				reg = <0x8002a000 0x2000>;
-				status = "disabled";
-			};
-
-			efuse@8002c000 {
-				compatible = "fsl,imx23-ocotp", "fsl,ocotp";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x8002c000 0x2000>;
-				clocks = <&clks 15>;
-			};
-
-			axi-ahb@8002e000 {
-				reg = <0x8002e000 0x2000>;
-				status = "disabled";
-			};
-
-			lcdif@80030000 {
-				compatible = "fsl,imx23-lcdif";
-				reg = <0x80030000 2000>;
-				interrupts = <46 45>;
-				clocks = <&clks 38>;
-				status = "disabled";
-			};
-
-			ssp1: spi@80034000 {
-				reg = <0x80034000 0x2000>;
-				interrupts = <2>;
-				clocks = <&clks 33>;
-				dmas = <&dma_apbh 2>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			tvenc@80038000 {
-				reg = <0x80038000 0x2000>;
-				status = "disabled";
-			};
-		};
-
-		apbx@80040000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80040000 0x40000>;
-			ranges;
-
-			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
-				reg = <0x80040000 0x2000>;
-				#clock-cells = <1>;
-			};
-
-			saif0: saif@80042000 {
-				reg = <0x80042000 0x2000>;
-				dmas = <&dma_apbx 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			power@80044000 {
-				reg = <0x80044000 0x2000>;
-				status = "disabled";
-			};
-
-			saif1: saif@80046000 {
-				reg = <0x80046000 0x2000>;
-				dmas = <&dma_apbx 10>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			audio-out@80048000 {
-				reg = <0x80048000 0x2000>;
-				dmas = <&dma_apbx 1>;
-				dma-names = "tx";
-				status = "disabled";
-			};
-
-			audio-in@8004c000 {
-				reg = <0x8004c000 0x2000>;
-				dmas = <&dma_apbx 0>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			lradc: lradc@80050000 {
-				compatible = "fsl,imx23-lradc";
-				reg = <0x80050000 0x2000>;
-				interrupts = <36 37 38 39 40 41 42 43 44>;
-				status = "disabled";
-				clocks = <&clks 26>;
-				#io-channel-cells = <1>;
-			};
-
-			spdif@80054000 {
-				reg = <0x80054000 2000>;
-				dmas = <&dma_apbx 2>;
-				dma-names = "tx";
-				status = "disabled";
-			};
-
-			i2c: i2c@80058000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx23-i2c";
-				reg = <0x80058000 0x2000>;
-				interrupts = <27>;
-				clock-frequency = <100000>;
-				dmas = <&dma_apbx 3>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			rtc@8005c000 {
-				compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
-				reg = <0x8005c000 0x2000>;
-				interrupts = <22>;
-			};
-
-			pwm: pwm@80064000 {
-				compatible = "fsl,imx23-pwm";
-				reg = <0x80064000 0x2000>;
-				clocks = <&clks 30>;
-				#pwm-cells = <2>;
-				fsl,pwm-number = <5>;
-				status = "disabled";
-			};
-
-			timrot@80068000 {
-				compatible = "fsl,imx23-timrot", "fsl,timrot";
-				reg = <0x80068000 0x2000>;
-				interrupts = <28 29 30 31>;
-				clocks = <&clks 28>;
-			};
-
-			auart0: serial@8006c000 {
-				compatible = "fsl,imx23-auart";
-				reg = <0x8006c000 0x2000>;
-				interrupts = <24>;
-				clocks = <&clks 32>;
-				dmas = <&dma_apbx 6>, <&dma_apbx 7>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			auart1: serial@8006e000 {
-				compatible = "fsl,imx23-auart";
-				reg = <0x8006e000 0x2000>;
-				interrupts = <59>;
-				clocks = <&clks 32>;
-				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			duart: serial@80070000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x80070000 0x2000>;
-				interrupts = <0>;
-				clocks = <&clks 32>, <&clks 16>;
-				clock-names = "uart", "apb_pclk";
-				status = "disabled";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				compatible = "fsl,imx23-usbphy";
-				reg = <0x8007c000 0x2000>;
-				clocks = <&clks 41>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80080000 0x80000>;
-		ranges;
-
-		usb0: usb@80080000 {
-			compatible = "fsl,imx23-usb", "fsl,imx27-usb";
-			reg = <0x80080000 0x40000>;
-			interrupts = <11>;
-			fsl,usbphy = <&usbphy0>;
-			clocks = <&clks 40>;
-			status = "disabled";
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&lradc 8>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
deleted file mode 100644
index 0703f62d10d1c..0000000000000
--- a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
+++ /dev/null
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx25.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX25";
-	compatible = "eukrea,cpuimx25", "fsl,imx25";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x4000000>; /* 64M */
-	};
-};
-
-&fec {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-cpuimx25 {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
-				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
-				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
-				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
-				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
-				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
-				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
deleted file mode 100644
index 7d4301b22b902..0000000000000
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	cmo_qvga: display {
-		model = "CMO-QVGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xcad08b80>;
-		bus-width = <18>;
-		display-timings {
-			native-mode = <&qvga_timings>;
-			qvga_timings: 320x240 {
-				clock-frequency = <6500000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <30>;
-				hfront-porch = <38>;
-				vback-porch = <20>;
-				vfront-porch = <3>;
-				hsync-len = <15>;
-				vsync-len = <4>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_lcd_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
-		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
-			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
-		};
-	};
-};
-
-&lcdc {
-	display = <&cmo_qvga>;
-	fsl,lpccr = <0x00a903ff>;
-	lcd-supply = <&reg_lcd_3v3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
deleted file mode 100644
index 80a7f96de4c6a..0000000000000
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the DVI-SVGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	dvi_svga: display {
-		model = "DVI-SVGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xfa208b80>;
-		bus-width = <18>;
-		display-timings {
-			native-mode = <&dvi_svga_timings>;
-			dvi_svga_timings: 800x600 {
-				clock-frequency = <40000000>;
-				hactive = <800>;
-				vactive = <600>;
-				hback-porch = <75>;
-				hfront-porch = <75>;
-				vback-porch = <7>;
-				vfront-porch = <75>;
-				hsync-len = <7>;
-				vsync-len = <7>;
-			};
-		};
-	};
-};
-
-&lcdc {
-	display = <&dvi_svga>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
deleted file mode 100644
index 24027a1fb46d1..0000000000000
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the DVI-VGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	dvi_vga: display {
-		model = "DVI-VGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xfa208b80>;
-		bus-width = <18>;
-		display-timings {
-			native-mode = <&dvi_vga_timings>;
-			dvi_vga_timings: 640x480 {
-				clock-frequency = <31250000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <100>;
-				hfront-porch = <100>;
-				vback-porch = <7>;
-				vfront-porch = <100>;
-				hsync-len = <7>;
-				vsync-len = <7>;
-			};
-		};
-	};
-};
-
-&lcdc {
-	display = <&dvi_vga>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
deleted file mode 100644
index c7207ea437c40..0000000000000
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx25-eukrea-cpuimx25.dtsi"
-
-/ {
-	model = "Eukrea MBIMXSD25";
-	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		button {
-			label = "BP1";
-			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioled>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx25-eukrea-tlv320aic23";
-		ssi-controller = <&ssi1>;
-		fsl,mux-int-port = <1>;
-		fsl,mux-ext-port = <5>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-mbimxsd25-baseboard {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX25_PAD_KPP_COL3__AUD5_TXFS		0xe0
-				MX25_PAD_KPP_COL2__AUD5_TXC		0xe0
-				MX25_PAD_KPP_COL1__AUD5_RXD		0xe0
-				MX25_PAD_KPP_COL0__AUD5_TXD		0xe0
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX25_PAD_SD1_CMD__ESDHC1_CMD		0x400000c0
-				MX25_PAD_SD1_CLK__ESDHC1_CLK		0x400000c0
-				MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x400000c0
-				MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x400000c0
-				MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x400000c0
-				MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x400000c0
-			>;
-		};
-
-		pinctrl_gpiokeys: gpiokeysgrp {
-			fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
-		};
-
-		pinctrl_gpioled: gpioledgrp {
-			fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
-		};
-
-		pinctrl_lcdc: lcdcgrp {
-			fsl,pins = <
-				MX25_PAD_LD0__LD0			0x1
-				MX25_PAD_LD1__LD1			0x1
-				MX25_PAD_LD2__LD2			0x1
-				MX25_PAD_LD3__LD3			0x1
-				MX25_PAD_LD4__LD4			0x1
-				MX25_PAD_LD5__LD5			0x1
-				MX25_PAD_LD6__LD6			0x1
-				MX25_PAD_LD7__LD7			0x1
-				MX25_PAD_LD8__LD8			0x1
-				MX25_PAD_LD9__LD9			0x1
-				MX25_PAD_LD10__LD10			0x1
-				MX25_PAD_LD11__LD11			0x1
-				MX25_PAD_LD12__LD12			0x1
-				MX25_PAD_LD13__LD13			0x1
-				MX25_PAD_LD14__LD14			0x1
-				MX25_PAD_LD15__LD15			0x1
-				MX25_PAD_GPIO_E__LD16			0x1
-				MX25_PAD_GPIO_F__LD17			0x1
-				MX25_PAD_HSYNC__HSYNC			0x80000000
-				MX25_PAD_VSYNC__VSYNC			0x80000000
-				MX25_PAD_LSCLK__LSCLK			0x80000000
-				MX25_PAD_OE_ACD__OE_ACD			0x80000000
-				MX25_PAD_CONTRAST__CONTRAST		0x80000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
-				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
-				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
-				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX25_PAD_UART2_RXD__UART2_RXD		0x80000000
-				MX25_PAD_UART2_TXD__UART2_TXD		0x80000000
-				MX25_PAD_UART2_RTS__UART2_RTS		0x80000000
-				MX25_PAD_UART2_CTS__UART2_CTS		0x80000000
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	status = "okay";
-};
-
-&usbotg {
-	external-vbus-divider;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
deleted file mode 100644
index 0950eb66d3d91..0000000000000
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- */
-
-/dts-v1/;
-#include "imx25.dtsi"
-
-/ {
-	model = "Ka-Ro TX25";
-	compatible = "karo,imx25-tx25", "fsl,imx25";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_fec_phy: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "fec-phy";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 9 0>;
-			enable-active-high;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
-	};
-};
-
-&iomuxc {
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
-			MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
-			MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
-			MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX25_PAD_D11__GPIO_4_9		0x80000000 /* FEC PHY power on pin */
-			MX25_PAD_D13__GPIO_4_7		0x80000000 /* FEC reset */
-			MX25_PAD_FEC_MDC__FEC_MDC	0x80000000
-			MX25_PAD_FEC_MDIO__FEC_MDIO	0x80000000
-			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x80000000
-			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x80000000
-			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x80000000
-			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x80000000
-			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x80000000
-			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x80000000
-			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x80000000
-		>;
-	};
-
-	pinctrl_nfc: nfcgrp {
-		fsl,pins = <
-			MX25_PAD_NF_CE0__NF_CE0		0x80000000
-			MX25_PAD_NFWE_B__NFWE_B		0x80000000
-			MX25_PAD_NFRE_B__NFRE_B		0x80000000
-			MX25_PAD_NFALE__NFALE		0x80000000
-			MX25_PAD_NFCLE__NFCLE		0x80000000
-			MX25_PAD_NFWP_B__NFWP_B		0x80000000
-			MX25_PAD_NFRB__NFRB		0x80000000
-			MX25_PAD_D7__D7			0x80000000
-			MX25_PAD_D6__D6			0x80000000
-			MX25_PAD_D5__D5			0x80000000
-			MX25_PAD_D4__D4			0x80000000
-			MX25_PAD_D3__D3			0x80000000
-			MX25_PAD_D2__D2			0x80000000
-			MX25_PAD_D1__D1			0x80000000
-			MX25_PAD_D0__D0			0x80000000
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
-	phy-mode = "rmii";
-	phy-supply = <&reg_fec_phy>;
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-on-flash-bbt;
-	nand-ecc-mode = "hw";
-	nand-bus-width = <8>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
deleted file mode 100644
index fb66884d8a2fa..0000000000000
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ /dev/null
@@ -1,313 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx25.dtsi"
-
-/ {
-	model = "Freescale i.MX25 Product Development Kit";
-	compatible = "fsl,imx25-pdk", "fsl,imx25";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x4000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_fec_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "fec-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 3 0>;
-			enable-active-high;
-		};
-
-		reg_2p5v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
-
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		reg_can_3v3: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "can-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 6 0>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx25-pdk-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx25-pdk-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-
-	wvga: display {
-		model = "CLAA057VC01CW";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xfa208b80>;
-		bus-width = <18>;
-		display-timings {
-			native-mode = <&wvga_timings>;
-			wvga_timings: 640x480 {
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <45>;
-				hfront-porch = <114>;
-				hsync-len = <1>;
-				vback-porch = <33>;
-				vfront-porch = <11>;
-				vsync-len = <1>;
-				clock-frequency = <25200000>;
-			};
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_3v3>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-supply = <&reg_fec_3v3>;
-	phy-reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 129>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&iomuxc {
-	imx25-pdk {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX25_PAD_RW__AUD4_TXFS			0xe0
-				MX25_PAD_OE__AUD4_TXC			0xe0
-				MX25_PAD_EB0__AUD4_TXD			0xe0
-				MX25_PAD_EB1__AUD4_RXD			0xe0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX25_PAD_GPIO_A__CAN1_TX		0x0
-				MX25_PAD_GPIO_B__CAN1_RX		0x0
-				MX25_PAD_D14__GPIO_4_6 			0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX25_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX25_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-				MX25_PAD_A14__GPIO_2_0			0x80000000
-				MX25_PAD_A15__GPIO_2_1			0x80000000
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
-				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
-				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
-				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
-				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
-				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
-				MX25_PAD_A17__GPIO_2_3			0x80000000
-				MX25_PAD_D12__GPIO_4_8			0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
-				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX25_PAD_KPP_ROW0__KPP_ROW0	0x80000000
-				MX25_PAD_KPP_ROW1__KPP_ROW1	0x80000000
-				MX25_PAD_KPP_ROW2__KPP_ROW2	0x80000000
-				MX25_PAD_KPP_ROW3__KPP_ROW3	0x80000000
-				MX25_PAD_KPP_COL0__KPP_COL0	0x80000000
-				MX25_PAD_KPP_COL1__KPP_COL1	0x80000000
-				MX25_PAD_KPP_COL2__KPP_COL2	0x80000000
-				MX25_PAD_KPP_COL3__KPP_COL3	0x80000000
-			>;
-		};
-
-		pinctrl_lcd: lcdgrp {
-			fsl,pins = <
-				MX25_PAD_LD0__LD0		0xe0
-				MX25_PAD_LD1__LD1		0xe0
-				MX25_PAD_LD2__LD2		0xe0
-				MX25_PAD_LD3__LD3		0xe0
-				MX25_PAD_LD4__LD4		0xe0
-				MX25_PAD_LD5__LD5		0xe0
-				MX25_PAD_LD6__LD6		0xe0
-				MX25_PAD_LD7__LD7		0xe0
-				MX25_PAD_LD8__LD8		0xe0
-				MX25_PAD_LD9__LD9		0xe0
-				MX25_PAD_LD10__LD10		0xe0
-				MX25_PAD_LD11__LD11		0xe0
-				MX25_PAD_LD12__LD12		0xe0
-				MX25_PAD_LD13__LD13		0xe0
-				MX25_PAD_LD14__LD14		0xe0
-				MX25_PAD_LD15__LD15		0xe0
-				MX25_PAD_GPIO_E__LD16		0xe0
-				MX25_PAD_GPIO_F__LD17		0xe0
-				MX25_PAD_HSYNC__HSYNC		0xe0
-				MX25_PAD_VSYNC__VSYNC		0xe0
-				MX25_PAD_LSCLK__LSCLK		0xe0
-				MX25_PAD_OE_ACD__OE_ACD		0xe0
-				MX25_PAD_CONTRAST__CONTRAST	0xe0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
-				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
-				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
-				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
-			>;
-		};
-	};
-};
-
-&lcdc {
-	display = <&wvga>;
-	fsl,lpccr = <0x00a903ff>;
-	fsl,lscr1 = <0x00120300>;
-	fsl,dmacr = <0x00020010>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcd>;
-	status = "okay";
-};
-
-&nfc {
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	linux,keymap = <
-			MATRIX_KEY(0x0, 0x0, KEY_UP)
-			MATRIX_KEY(0x0, 0x1, KEY_DOWN)
-			MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN)
-			MATRIX_KEY(0x0, 0x3, KEY_HOME)
-			MATRIX_KEY(0x1, 0x0, KEY_RIGHT)
-			MATRIX_KEY(0x1, 0x1, KEY_LEFT)
-			MATRIX_KEY(0x1, 0x2, KEY_ENTER)
-			MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP)
-			MATRIX_KEY(0x2, 0x0, KEY_F6)
-			MATRIX_KEY(0x2, 0x1, KEY_F8)
-			MATRIX_KEY(0x2, 0x2, KEY_F9)
-			MATRIX_KEY(0x2, 0x3, KEY_F10)
-			MATRIX_KEY(0x3, 0x0, KEY_F1)
-			MATRIX_KEY(0x3, 0x1, KEY_F2)
-			MATRIX_KEY(0x3, 0x2, KEY_F3)
-			MATRIX_KEY(0x3, 0x2, KEY_POWER)
-	>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&tsc {
-	status = "okay";
-};
-
-&tscadc {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	status = "okay";
-};
-
-&usbotg {
-	external-vbus-divider;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
deleted file mode 100644
index 908caf8103519..0000000000000
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ /dev/null
@@ -1,652 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- * Based on imx35-pinfunc.h in the same directory Which is:
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DTS_IMX25_PINFUNC_H
-#define __DTS_IMX25_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-
-#define MX25_PAD_A10__A10			0x008 0x000 0x000 0x00 0x000
-#define MX25_PAD_A10__GPIO_4_0			0x008 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_A13__A13			0x00c 0x22C 0x000 0x00 0x000
-#define MX25_PAD_A13__GPIO_4_1			0x00c 0x22C 0x000 0x05 0x000
-#define MX25_PAD_A13__LCDC_CLS			0x00c 0x22C 0x000 0x07 0x000
-
-#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x00 0x000
-#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x05 0x000
-#define MX25_PAD_A14__SIM1_CLK1			0x010 0x230 0x000 0x06 0x000
-#define MX25_PAD_A14__LCDC_SPL			0x010 0x230 0x000 0x07 0x000
-
-#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x00 0x000
-#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x05 0x000
-#define MX25_PAD_A15__SIM1_RST1			0x014 0x234 0x000 0x06 0x000
-#define MX25_PAD_A15__LCDC_PS			0x014 0x234 0x000 0x07 0x000
-
-#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x00 0x000
-#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x05 0x000
-#define MX25_PAD_A16__SIM1_VEN1			0x018 0x000 0x000 0x06 0x000
-#define MX25_PAD_A16__LCDC_REV			0x018 0x000 0x000 0x07 0x000
-
-#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x00 0x000
-#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x05 0x000
-#define MX25_PAD_A17__SIM1_TX			0x01c 0x238 0x554 0x06 0x000
-#define MX25_PAD_A17__FEC_TX_ERR		0x01c 0x238 0x000 0x07 0x000
-
-#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x00 0x000
-#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x05 0x000
-#define MX25_PAD_A18__SIM1_PD1			0x020 0x23c 0x550 0x06 0x000
-#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x07 0x000
-
-#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x00 0x000
-#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x05 0x000
-#define MX25_PAD_A19__SIM1_RX1			0x024 0x240 0x54c 0x06 0x000
-#define MX25_PAD_A19__FEC_RX_ERR		0x024 0x240 0x518 0x07 0x000
-
-#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x00 0x000
-#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x05 0x000
-#define MX25_PAD_A20__SIM2_CLK1			0x028 0x244 0x000 0x06 0x000
-#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x07 0x000
-
-#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x00 0x000
-#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x05 0x000
-#define MX25_PAD_A21__SIM2_RST1			0x02c 0x248 0x000 0x06 0x000
-#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x07 0x000
-
-#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x00 0x000
-#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x05 0x000
-#define MX25_PAD_A22__SIM2_VEN1			0x030 0x000 0x000 0x06 0x000
-#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x07 0x000
-
-#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x00 0x000
-#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x05 0x000
-#define MX25_PAD_A23__SIM2_TX1			0x034 0x24c 0x560 0x06 0x000
-#define MX25_PAD_A23__FEC_TDATA3		0x034 0x24c 0x000 0x07 0x000
-
-#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x00 0x000
-#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x05 0x000
-#define MX25_PAD_A24__SIM2_PD1			0x038 0x250 0x55c 0x06 0x000
-#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x07 0x000
-
-#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x00 0x000
-#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x05 0x000
-#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x07 0x000
-
-#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x00 0x000
-#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x04 0x000
-#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x05 0x000
-#define MX25_PAD_EB0__CSPI3_SS0			0x040 0x258 0x4bc 0x06 0x000
-
-#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x00 0x000
-#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x04 0x000
-#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x05 0x000
-#define MX25_PAD_EB1__CSPI3_SS1			0x044 0x25c 0x4c0 0x06 0x000
-
-#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x00 0x000
-#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x04 0x000
-#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x05 0x000
-
-#define MX25_PAD_CS0__CS0			0x04c 0x000 0x000 0x00 0x000
-#define MX25_PAD_CS0__GPIO_4_2			0x04c 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_CS1__CS1			0x050 0x000 0x000 0x00 0x000
-#define MX25_PAD_CS1__NF_CE3			0x050 0x000 0x000 0x01 0x000
-#define MX25_PAD_CS1__GPIO_4_3			0x050 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x00 0x000
-#define MX25_PAD_CS4__NF_CE1			0x054 0x264 0x000 0x01 0x000
-#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x03 0x000
-#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x05 0x000
-#define MX25_PAD_CS4__CSPI3_MOSI		0x054 0x264 0x4b8 0x06 0x000
-
-#define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x00 0x000
-#define MX25_PAD_CS5__NF_CE2			0x058 0x268 0x000 0x01 0x000
-#define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x03 0x000
-#define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x05 0x000
-#define MX25_PAD_CS5__CSPI3_MISO		0x058 0x268 0x4b4 0x06 0x000
-
-#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x00 0x000
-#define MX25_PAD_NF_CE0__CSPI1_SS3		0x05c 0x26c 0x490 0x01 0x000
-#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x05 0x000
-
-#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x00 0x000
-#define MX25_PAD_ECB__UART5_TXD			0x060 0x270 0x000 0x03 0x000
-#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x05 0x000
-#define MX25_PAD_ECB__CSPI3_SCLK		0x060 0x270 0x4ac 0x06 0x000
-
-#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x00 0x000
-#define MX25_PAD_LBA__UART5_RXD			0x064 0x274 0x578 0x03 0x000
-#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x05 0x000
-#define MX25_PAD_LBA__CSPI3_RDY			0x064 0x274 0x4b0 0x06 0x000
-
-#define MX25_PAD_BCLK__BCLK			0x068 0x000 0x000 0x00 0x000
-#define MX25_PAD_BCLK__GPIO_4_4			0x068 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x00 0x000
-#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x04 0x000
-#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x05 0x000
-
-#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x00 0x000
-#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x00 0x000
-#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x00 0x000
-#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x00 0x000
-#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x00 0x000
-#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x00 0x000
-#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x05 0x000
-
-#define MX25_PAD_D15__D15			0x088 0x280 0x000 0x00 0x000
-#define MX25_PAD_D15__LD16			0x088 0x280 0x000 0x01 0x000
-#define MX25_PAD_D15__GPIO_4_5			0x088 0x280 0x000 0x05 0x000
-#define MX25_PAD_D15__ESDHC1_DAT7		0x088 0x280 0x4d8 0x06 0x000
-
-#define MX25_PAD_D14__D14			0x08c 0x284 0x000 0x00 0x000
-#define MX25_PAD_D14__LD17			0x08c 0x284 0x000 0x01 0x000
-#define MX25_PAD_D14__GPIO_4_6			0x08c 0x284 0x000 0x05 0x000
-#define MX25_PAD_D14__ESDHC1_DAT6		0x08c 0x284 0x4d4 0x06 0x000
-
-#define MX25_PAD_D13__D13			0x090 0x288 0x000 0x00 0x000
-#define MX25_PAD_D13__LD18			0x090 0x288 0x000 0x01 0x000
-#define MX25_PAD_D13__GPIO_4_7			0x090 0x288 0x000 0x05 0x000
-#define MX25_PAD_D13__ESDHC1_DAT5		0x090 0x288 0x4d0 0x06 0x000
-
-#define MX25_PAD_D12__D12			0x094 0x28c 0x000 0x00 0x000
-#define MX25_PAD_D12__GPIO_4_8			0x094 0x28c 0x000 0x05 0x000
-#define MX25_PAD_D12__ESDHC1_DAT4		0x094 0x28c 0x4cc 0x06 0x000
-
-#define MX25_PAD_D11__D11			0x098 0x290 0x000 0x00 0x000
-#define MX25_PAD_D11__GPIO_4_9			0x098 0x290 0x000 0x05 0x000
-#define MX25_PAD_D11__USBOTG_PWR		0x098 0x290 0x000 0x06 0x000
-
-#define MX25_PAD_D10__D10			0x09c 0x294 0x000 0x00 0x000
-#define MX25_PAD_D10__GPIO_4_10			0x09c 0x294 0x000 0x05 0x000
-#define MX25_PAD_D10__USBOTG_OC			0x09c 0x294 0x57c 0x06 0x000
-
-#define MX25_PAD_D9__D9				0x0a0 0x298 0x000 0x00 0x000
-#define MX25_PAD_D9__GPIO_4_11			0x0a0 0x298 0x000 0x05 0x000
-#define MX25_PAD_D9__USBH2_PWR			0x0a0 0x298 0x000 0x06 0x000
-
-#define MX25_PAD_D8__D8				0x0a4 0x29c 0x000 0x00 0x000
-#define MX25_PAD_D8__GPIO_4_12			0x0a4 0x29c 0x000 0x05 0x000
-#define MX25_PAD_D8__USBH2_OC			0x0a4 0x29c 0x580 0x06 0x000
-
-#define MX25_PAD_D7__D7				0x0a8 0x2a0 0x000 0x00 0x000
-#define MX25_PAD_D7__GPIO_4_13			0x0a8 0x2a0 0x000 0x05 0x000
-
-#define MX25_PAD_D6__D6				0x0ac 0x2a4 0x000 0x00 0x000
-#define MX25_PAD_D6__GPIO_4_14			0x0ac 0x2a4 0x000 0x05 0x000
-
-#define MX25_PAD_D5__D5				0x0b0 0x2a8 0x000 0x00 0x000
-#define MX25_PAD_D5__GPIO_4_15			0x0b0 0x2a8 0x000 0x05 0x000
-
-#define MX25_PAD_D4__D4				0x0b4 0x2ac 0x000 0x00 0x000
-#define MX25_PAD_D4__GPIO_4_16			0x0b4 0x2ac 0x000 0x05 0x000
-
-#define MX25_PAD_D3__D3				0x0b8 0x2b0 0x000 0x00 0x000
-#define MX25_PAD_D3__GPIO_4_17			0x0b8 0x2b0 0x000 0x05 0x000
-
-#define MX25_PAD_D2__D2				0x0bc 0x2b4 0x000 0x00 0x000
-#define MX25_PAD_D2__GPIO_4_18			0x0bc 0x2b4 0x000 0x05 0x000
-
-#define MX25_PAD_D1__D1				0x0c0 0x2b8 0x000 0x00 0x000
-#define MX25_PAD_D1__GPIO_4_19			0x0c0 0x2b8 0x000 0x05 0x000
-
-#define MX25_PAD_D0__D0				0x0c4 0x2bc 0x000 0x00 0x000
-#define MX25_PAD_D0__GPIO_4_20			0x0c4 0x2bc 0x000 0x05 0x000
-
-#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x00 0x000
-#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x02 0x000
-#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x05 0x000
-
-#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x00 0x000
-#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x02 0x000
-#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x05 0x000
-
-#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x00 0x000
-#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x05 0x000
-
-#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x00 0x000
-#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x05 0x000
-
-#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x00 0x000
-#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x05 0x000
-
-#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x00 0x000
-#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x05 0x000
-
-#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x00 0x000
-#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x05 0x000
-
-#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x00 0x000
-#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x05 0x000
-
-#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x00 0x000
-#define MX25_PAD_LD8__UART4_RXD			0x0e8 0x2e0 0x570 0x02 0x000
-#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x05 0x000
-/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
-#define MX25_PAD_LD8__ESDHC2_CMD		0x0e8 0x2e0 0x4e0 0x16 0x000
-
-#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x00 0x000
-#define MX25_PAD_LD9__UART4_TXD			0x0ec 0x2e4 0x000 0x02 0x000
-#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x05 0x001
-#define MX25_PAD_LD9__ESDHC2_CLK		0x0ec 0x2e4 0x4dc 0x06 0x000
-
-#define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x00 0x000
-#define MX25_PAD_LD10__UART4_RTS		0x0f0 0x2e8 0x56c 0x02 0x000
-#define MX25_PAD_LD10__FEC_RX_ERR		0x0f0 0x2e8 0x518 0x05 0x001
-
-#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x00 0x000
-#define MX25_PAD_LD11__UART4_CTS		0x0f4 0x2ec 0x000 0x02 0x000
-#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x05 0x001
-#define MX25_PAD_LD11__ESDHC2_DAT1		0x0f4 0x2ec 0x4e8 0x06 0x000
-
-#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x00 0x000
-#define MX25_PAD_LD12__CSPI2_MOSI		0x0f8 0x2f0 0x4a0 0x02 0x000
-#define MX25_PAD_LD12__KPP_ROW6			0x0f8 0x2f0 0x544 0x04 0x000
-#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x05 0x001
-
-#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x00 0x000
-#define MX25_PAD_LD13__CSPI2_MISO		0x0fc 0x2f4 0x49c 0x02 0x000
-#define MX25_PAD_LD13__KPP_ROW7			0x0fc 0x2f4 0x548 0x04 0x000
-#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x05 0x000
-
-#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x00 0x000
-#define MX25_PAD_LD14__CSPI2_SCLK		0x100 0x2f8 0x494 0x02 0x000
-#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x05 0x000
-
-#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x00 0x000
-#define MX25_PAD_LD15__CSPI2_RDY		0x104 0x2fc 0x498 0x02 0x000
-#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x05 0x001
-
-#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x00 0x000
-#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x05 0x000
-
-#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x00 0x000
-#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x05 0x000
-
-#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x00 0x000
-#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x05 0x000
-
-#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x00 0x000
-#define MX25_PAD_OE_ACD__CSPI2_SS0		0x114 0x30c 0x4a4 0x02 0x000
-#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x05 0x000
-
-#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x00 0x000
-#define MX25_PAD_CONTRAST__GPT4_CAPIN1		0x118 0x310 0x000 0x01 0x000
-#define MX25_PAD_CONTRAST__CSPI2_SS1		0x118 0x310 0x4a8 0x02 0x000
-#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x04 0x000
-#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x05 0x001
-#define MX25_PAD_CONTRAST__USBH2_PWR		0x118 0x310 0x000 0x06 0x000
-
-#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x00 0x000
-#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x05 0x000
-#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x06 0x001
-
-#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x00 0x000
-#define MX25_PAD_CSI_D2__UART5_RXD		0x120 0x318 0x578 0x01 0x001
-#define MX25_PAD_CSI_D2__SIM1_CLK0		0x120 0x318 0x000 0x04 0x000
-#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x05 0x000
-#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x4b8 0x07 0x001
-
-#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x00 0x000
-#define MX25_PAD_CSI_D3__UART5_TXD		0x124 0x31c 0x000 0x01 0x000
-#define MX25_PAD_CSI_D3__SIM1_RST0		0x124 0x31c 0x000 0x04 0x000
-#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x05 0x000
-#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x07 0x001
-
-#define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x00 0x000
-#define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x01 0x001
-#define MX25_PAD_CSI_D4__SIM1_VEN0		0x128 0x320 0x000 0x04 0x000
-#define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x05 0x000
-#define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x4ac 0x07 0x001
-
-#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x00 0x000
-#define MX25_PAD_CSI_D5__UART5_CTS		0x12c 0x324 0x000 0x01 0x000
-#define MX25_PAD_CSI_D5__SIM1_TX0		0x12c 0x324 0x000 0x04 0x000
-#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x05 0x000
-#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x4b0 0x07 0x001
-
-#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x00 0x000
-/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
-#define MX25_PAD_CSI_D6__ESDHC2_CMD		0x130 0x328 0x4e0 0x12 0x001
-#define MX25_PAD_CSI_D6__SIM1_PD0		0x130 0x328 0x000 0x04 0x000
-#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x05 0x000
-#define MX25_PAD_CSI_D6__CSPI3_SS0		0x130 0x328 0x4bc 0x07 0x001
-
-#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x00 0x000
-#define MX25_PAD_CSI_D7__ESDHC2_CLK		0x134 0x32C 0x4dc 0x02 0x001
-#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x05 0x000
-#define MX25_PAD_CSI_D7__CSPI3_SS1		0x134 0x32c 0x4c0 0x07 0x001
-
-#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x00 0x000
-#define MX25_PAD_CSI_D8__AUD6_RXC		0x138 0x330 0x000 0x02 0x000
-#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x05 0x000
-#define MX25_PAD_CSI_D8__CSPI3_SS2		0x138 0x330 0x4c4 0x07 0x000
-
-#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x00 0x000
-#define MX25_PAD_CSI_D9__AUD6_RXFS		0x13c 0x334 0x000 0x02 0x000
-#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x05 0x000
-#define MX25_PAD_CSI_D9__CSPI3_SS3		0x13c 0x334 0x4c8 0x07 0x000
-
-#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x00 0x000
-#define MX25_PAD_CSI_MCLK__AUD6_TXD		0x140 0x338 0x000 0x01 0x000
-#define MX25_PAD_CSI_MCLK__ESDHC2_DAT0		0x140 0x338 0x4e4 0x02 0x001
-#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x05 0x000
-
-#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x00 0x000
-#define MX25_PAD_CSI_VSYNC__AUD6_RXD		0x144 0x33c 0x000 0x01 0x000
-#define MX25_PAD_CSI_VSYNC__ESDHC2_DAT1		0x144 0x33c 0x4e8 0x02 0x001
-#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x05 0x000
-
-#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x00 0x000
-#define MX25_PAD_CSI_HSYNC__AUD6_TXC		0x148 0x340 0x000 0x01 0x000
-#define MX25_PAD_CSI_HSYNC__ESDHC2_DAT2		0x148 0x340 0x4ec 0x02 0x001
-#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x05 0x000
-
-#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x00 0x000
-#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS		0x14c 0x344 0x000 0x01 0x000
-#define MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3	0x14c 0x344 0x4f0 0x02 0x001
-#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x05 0x000
-
-#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x00 0x000
-#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x05 0x000
-
-#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x00 0x000
-#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x05 0x000
-
-#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x00 0x000
-#define MX25_PAD_CSPI1_MOSI__UART3_RXD		0x158 0x350 0x568 0x02 0x000
-#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x05 0x000
-
-#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x00 0x000
-#define MX25_PAD_CSPI1_MISO__UART3_TXD		0x15c 0x354 0x000 0x02 0x000
-#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x05 0x000
-
-#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x00 0x000
-#define MX25_PAD_CSPI1_SS0__PWM2_PWMO		0x160 0x358 0x000 0x02 0x000
-#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x05 0x000
-
-#define MX25_PAD_CSPI1_SS1__CSPI1_SS1		0x164 0x35c 0x000 0x00 0x000
-#define MX25_PAD_CSPI1_SS1__I2C3_DAT		0x164 0x35C 0x528 0x01 0x001
-#define MX25_PAD_CSPI1_SS1__UART3_RTS		0x164 0x35c 0x000 0x02 0x000
-#define MX25_PAD_CSPI1_SS1__GPIO_1_17		0x164 0x35c 0x000 0x05 0x000
-
-#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x00 0x000
-#define MX25_PAD_CSPI1_SCLK__UART3_CTS		0x168 0x360 0x000 0x02 0x000
-#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x05 0x000
-
-#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x00 0x000
-#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x05 0x000
-
-#define MX25_PAD_UART1_RXD__UART1_RXD		0x170 0x368 0x000 0x00 0x000
-#define MX25_PAD_UART1_RXD__UART2_DTR		0x170 0x368 0x000 0x03 0x000
-#define MX25_PAD_UART1_RXD__GPIO_4_22		0x170 0x368 0x000 0x05 0x000
-
-#define MX25_PAD_UART1_TXD__UART1_TXD		0x174 0x36c 0x000 0x00 0x000
-#define MX25_PAD_UART1_TXD__UART2_DSR		0x174 0x36c 0x000 0x03 0x000
-#define MX25_PAD_UART1_TXD__GPIO_4_23		0x174 0x36c 0x000 0x05 0x000
-
-#define MX25_PAD_UART1_RTS__UART1_RTS		0x178 0x370 0x000 0x00 0x000
-#define MX25_PAD_UART1_RTS__CSI_D0		0x178 0x370 0x488 0x01 0x001
-#define MX25_PAD_UART1_RTS__GPT3_CAPIN1		0x178 0x370 0x000 0x02 0x000
-#define MX25_PAD_UART1_RTS__UART2_DCD		0x178 0x370 0x000 0x03 0x000
-#define MX25_PAD_UART1_RTS__GPIO_4_24		0x178 0x370 0x000 0x05 0x000
-
-#define MX25_PAD_UART1_CTS__UART1_CTS		0x17c 0x374 0x000 0x00 0x000
-#define MX25_PAD_UART1_CTS__CSI_D1		0x17c 0x374 0x48c 0x01 0x001
-#define MX25_PAD_UART1_CTS__UART2_RI		0x17c 0x374 0x000 0x03 0x001
-#define MX25_PAD_UART1_CTS__GPIO_4_25		0x17c 0x374 0x000 0x05 0x000
-
-#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x00 0x000
-#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x05 0x000
-
-#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x00 0x000
-#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x05 0x000
-
-#define MX25_PAD_UART2_RTS__UART2_RTS		0x188 0x380 0x000 0x00 0x000
-#define MX25_PAD_UART2_RTS__FEC_COL		0x188 0x380 0x504 0x02 0x002
-#define MX25_PAD_UART2_RTS__GPT1_CAPIN1		0x188 0x380 0x000 0x03 0x000
-#define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x05 0x000
-#define MX25_PAD_UART2_RTS__CSPI2_SS3		0x188 0x380 0x000 0x06 0x000
-
-#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x00 0x000
-#define MX25_PAD_UART2_CTS__FEC_RX_ERR		0x18c 0x384 0x518 0x02 0x002
-#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x05 0x000
-#define MX25_PAD_UART2_CTS__CSPI3_SS3		0x18c 0x384 0x4c8 0x06 0x001
-
-/*
- * Removing the SION bit from MX25_PAD_*__ESDHCn_CMD breaks detecting an SD
- * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM
- * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon
- * bug that configuring the ESDHCn_CMD function doesn't enable the input path
- * for this pin.
- * This might have side effects for other hardware units that are connected to
- * that pin and use the respective function as input.
- */
-#define MX25_PAD_SD1_CMD__ESDHC1_CMD		0x190 0x388 0x000 0x10 0x000
-#define MX25_PAD_SD1_CMD__CSPI2_MOSI		0x190 0x388 0x4a0 0x01 0x001
-#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x02 0x002
-#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x05 0x000
-
-#define MX25_PAD_SD1_CLK__ESDHC1_CLK		0x194 0x38c 0x000 0x00 0x000
-#define MX25_PAD_SD1_CLK__CSPI2_MISO		0x194 0x38c 0x49c 0x01 0x001
-#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x02 0x002
-#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x05 0x000
-
-#define MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x198 0x390 0x000 0x00 0x000
-#define MX25_PAD_SD1_DATA0__CSPI2_SCLK		0x198 0x390 0x494 0x01 0x001
-#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x05 0x000
-
-#define MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x19c 0x394 0x000 0x00 0x000
-#define MX25_PAD_SD1_DATA1__CSPI2_RDY		0x19c 0x394 0x498 0x01 0x001
-#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x03 0x000
-#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x05 0x000
-
-#define MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x1a0 0x398 0x000 0x00 0x000
-#define MX25_PAD_SD1_DATA2__CSPI2_SS0		0x1a0 0x398 0x4a4 0x01 0x001
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x02 0x002
-#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x05 0x000
-
-#define MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x1a4 0x39c 0x000 0x00 0x000
-#define MX25_PAD_SD1_DATA3__CSPI2_SS1		0x1a4 0x39c 0x4a8 0x01 0x001
-#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x02 0x002
-#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x05 0x000
-
-#define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x00 0x000
-#define MX25_PAD_KPP_ROW0__UART3_RXD		0x1a8 0x3a0 0x568 0x01 0x001
-#define MX25_PAD_KPP_ROW0__UART1_DTR		0x1a8 0x3a0 0x000 0x04 0x000
-#define MX25_PAD_KPP_ROW0__GPIO_2_29		0x1a8 0x3a0 0x000 0x05 0x000
-
-#define MX25_PAD_KPP_ROW1__KPP_ROW1		0x1ac 0x3a4 0x000 0x00 0x000
-#define MX25_PAD_KPP_ROW1__UART3_TXD		0x1ac 0x3a4 0x000 0x01 0x000
-#define MX25_PAD_KPP_ROW1__UART1_DSR		0x1ac 0x3a4 0x000 0x04 0x000
-#define MX25_PAD_KPP_ROW1__GPIO_2_30		0x1ac 0x3a4 0x000 0x05 0x000
-
-#define MX25_PAD_KPP_ROW2__KPP_ROW2		0x1b0 0x3a8 0x000 0x00 0x000
-#define MX25_PAD_KPP_ROW2__UART3_RTS		0x1b0 0x3a8 0x000 0x01 0x000
-#define MX25_PAD_KPP_ROW2__CSI_D0		0x1b0 0x3a8 0x488 0x03 0x002
-#define MX25_PAD_KPP_ROW2__UART1_DCD		0x1b0 0x3a8 0x000 0x04 0x000
-#define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x05 0x000
-
-#define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x00 0x000
-#define MX25_PAD_KPP_ROW3__UART3_CTS		0x1b4 0x3ac 0x000 0x01 0x000
-#define MX25_PAD_KPP_ROW3__CSI_D1		0x1b4 0x3ac 0x48c 0x03 0x002
-#define MX25_PAD_KPP_ROW3__UART1_RI		0x1b4 0x3ac 0x000 0x04 0x000
-#define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x05 0x000
-
-#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x00 0x000
-#define MX25_PAD_KPP_COL0__UART4_RXD		0x1b8 0x3b0 0x570 0x01 0x001
-#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x02 0x000
-#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x05 0x000
-
-#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x00 0x000
-#define MX25_PAD_KPP_COL1__UART4_TXD		0x1bc 0x3b4 0x000 0x01 0x000
-#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x02 0x000
-#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x05 0x000
-
-#define MX25_PAD_KPP_COL2__KPP_COL2		0x1c0 0x3b8 0x000 0x00 0x000
-#define MX25_PAD_KPP_COL2__UART4_RTS		0x1c0 0x3b8 0x56c 0x01 0x001
-#define MX25_PAD_KPP_COL2__AUD5_TXC		0x1c0 0x3b8 0x000 0x02 0x000
-#define MX25_PAD_KPP_COL2__GPIO_3_3		0x1c0 0x3b8 0x000 0x05 0x000
-
-#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x00 0x000
-#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x01 0x000
-#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x02 0x000
-#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x05 0x000
-
-#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x00 0x000
-/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
-#define MX25_PAD_FEC_MDC__ESDHC2_CMD		0x1c8 0x3c0 0x4e0 0x11 0x002
-#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x02 0x001
-#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x05 0x000
-
-#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x00 0x000
-#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x02 0x001
-#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x05 0x000
-
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x00 0x000
-#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x05 0x000
-
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x00 0x000
-#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x02 0x001
-#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x05 0x000
-
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x00 0x000
-#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x05 0x000
-#define MX25_PAD_FEC_TX_EN__KPP_ROW4		0x1d8 0x3d0 0x53c 0x06 0x000
-
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x00 0x000
-#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x05 0x000
-#define MX25_PAD_FEC_RDATA0__KPP_ROW5 		0x1dc 0x3d4 0x540 0x06 0x000
-
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x00 0x000
-/*
- * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
- * 01/2011) this is CAN1_TX but that's wrong.
- */
-#define MX25_PAD_FEC_RDATA1__CAN2_TX		0x1e0 0x3d8 0x000 0x04 0x000
-#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x05 0x000
-
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x00 0x000
-/*
- * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
- * 01/2011) this is CAN1_RX but that's wrong.
- */
-#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x04 0x000
-#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x05 0x000
-
-#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x00 0x000
-#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x05 0x000
-
-#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x00 0x000
-#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x01 0x000
-#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x05 0x000
-
-#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
-
-#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x00 0x000
-#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x05 0x000
-
-#define MX25_PAD_GPIO_A__GPIO_1_0		0x1f4 0x3f0 0x000 0x00 0x000
-#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x06 0x000
-#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x02 0x000
-
-#define MX25_PAD_GPIO_B__GPIO_1_1		0x1f8 0x3f4 0x000 0x00 0x000
-#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x02 0x001
-#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x06 0x001
-
-#define MX25_PAD_GPIO_C__GPIO_1_2		0x1fc 0x3f8 0x000 0x00 0x000
-#define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x01 0x000
-#define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x02 0x001
-#define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x03 0x001
-#define MX25_PAD_GPIO_C__GPT2_CAPIN1		0x1fc 0x3f8 0x000 0x04 0x000
-#define MX25_PAD_GPIO_C__CSPI1_SS2		0x1fc 0x3f8 0x000 0x05 0x000
-#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x06 0x000
-#define MX25_PAD_GPIO_C__CSPI2_SS2		0x1fc 0x3f8 0x000 0x07 0x000
-
-#define MX25_PAD_GPIO_D__GPIO_1_3		0x200 0x3fc 0x000 0x00 0x000
-#define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x02 0x001
-#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x06 0x001
-#define MX25_PAD_GPIO_D__CSPI3_SS2		0x200 0x3fc 0x4c4 0x07 0x001
-
-#define MX25_PAD_GPIO_E__GPIO_1_4		0x204 0x400 0x000 0x00 0x000
-#define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x01 0x002
-#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
-#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x04 0x000
-#define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x06 0x002
-
-#define MX25_PAD_GPIO_F__GPIO_1_5		0x208 0x404 0x000 0x00 0x000
-#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
-#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x04 0x000
-#define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x06 0x000
-
-#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x00 0x000
-#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x00 0x000
-#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x00 0x000
-#define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x04 0x000
-#define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x05 0x000
-#define MX25_PAD_VSTBY_REQ__UART4_RTS		0x214 0x408 0x56c 0x06 0x002
-
-#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x00 0x000
-#define MX25_PAD_VSTBY_ACK__CSPI1_SS3		0x218 0x40c 0x490 0x02 0x001
-#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x05 0x000
-
-#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x00 0x000
-#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x04 0x001
-#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x05 0x000
-#define MX25_PAD_POWER_FAIL__UART4_CTS		0x21c 0x410 0x000 0x06 0x000
-
-#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x00 0x000
-#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x05 0x000
-
-#define MX25_PAD_BOOT_MODE0__BOOT_MODE0		0x224 0x000 0x000 0x00 0x000
-#define MX25_PAD_BOOT_MODE0__GPIO_4_30		0x224 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_BOOT_MODE1__BOOT_MODE1		0x228 0x000 0x000 0x00 0x000
-#define MX25_PAD_BOOT_MODE1__GPIO_4_31		0x228 0x000 0x000 0x05 0x000
-
-/*
- * Compatibility defines for out-of-tree users. You should update if you make
- * use of one of them.
- */
-#define MX25_PAD_D15__SDHC1_DAT7		MX25_PAD_D15__ESDHC1_DAT7
-#define MX25_PAD_D14__SDHC1_DAT6		MX25_PAD_D14__ESDHC1_DAT6
-#define MX25_PAD_D13__SDHC1_DAT5		MX25_PAD_D13__ESDHC1_DAT5
-#define MX25_PAD_D12__SDHC1_DAT4		MX25_PAD_D12__ESDHC1_DAT4
-#define MX25_PAD_LD8__SDHC2_CMD			MX25_PAD_LD8__ESDHC2_CMD
-#define MX25_PAD_LD9__SDHC2_CLK			MX25_PAD_LD9__ESDHC2_CLK
-#define MX25_PAD_LD11__SDHC2_DAT1		MX25_PAD_LD11__ESDHC2_DAT1
-#define MX25_PAD_CSI_D6__SDHC2_CMD		MX25_PAD_CSI_D6__ESDHC2_CMD
-#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK		MX25_PAD_CSI_D7__ESDHC2_CLK
-#define MX25_PAD_CSI_MCLK__SDHC2_DAT0		MX25_PAD_CSI_MCLK__ESDHC2_DAT0
-#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1		MX25_PAD_CSI_VSYNC__ESDHC2_DAT1
-#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2		MX25_PAD_CSI_HSYNC__ESDHC2_DAT2
-#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3		MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3
-#define MX25_PAD_SD1_CMD__SD1_CMD		MX25_PAD_SD1_CMD__ESDHC1_CMD
-#define MX25_PAD_SD1_CLK__SD1_CLK		MX25_PAD_SD1_CLK__ESDHC1_CLK
-#define MX25_PAD_SD1_DATA0__SD1_DATA0		MX25_PAD_SD1_DATA0__ESDHC1_DAT0
-#define MX25_PAD_SD1_DATA1__SD1_DATA1		MX25_PAD_SD1_DATA1__ESDHC1_DAT1
-#define MX25_PAD_SD1_DATA2__SD1_DATA2		MX25_PAD_SD1_DATA2__ESDHC1_DAT2
-#define MX25_PAD_SD1_DATA3__SD1_DATA3		MX25_PAD_SD1_DATA3__ESDHC1_DAT3
-
-#endif /* __DTS_IMX25_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
deleted file mode 100644
index 5f90d72b840b0..0000000000000
--- a/arch/arm/boot/dts/imx25.dtsi
+++ /dev/null
@@ -1,637 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx25-pinfunc.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		mmc0 = &esdhc1;
-		mmc1 = &esdhc2;
-		pwm0 = &pwm1;
-		pwm1 = &pwm2;
-		pwm2 = &pwm3;
-		pwm3 = &pwm4;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		spi0 = &spi1;
-		spi1 = &spi2;
-		spi2 = &spi3;
-		usb0 = &usbotg;
-		usb1 = &usbhost1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	asic: asic-interrupt-controller@68000000 {
-		compatible = "fsl,imx25-asic", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x68000000 0x8000000>;
-	};
-
-	clocks {
-		osc {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&asic>;
-		ranges;
-
-		bus@43f00000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x43f00000 0x100000>;
-			ranges;
-
-			aips1: bridge@43f00000 {
-				compatible = "fsl,imx25-aips";
-				reg = <0x43f00000 0x4000>;
-			};
-
-			i2c1: i2c@43f80000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
-				reg = <0x43f80000 0x4000>;
-				clocks = <&clks 48>;
-				clock-names = "";
-				interrupts = <3>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@43f84000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
-				reg = <0x43f84000 0x4000>;
-				clocks = <&clks 48>;
-				clock-names = "";
-				interrupts = <10>;
-				status = "disabled";
-			};
-
-			can1: can@43f88000 {
-				compatible = "fsl,imx25-flexcan";
-				reg = <0x43f88000 0x4000>;
-				interrupts = <43>;
-				clocks = <&clks 75>, <&clks 75>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			can2: can@43f8c000 {
-				compatible = "fsl,imx25-flexcan";
-				reg = <0x43f8c000 0x4000>;
-				interrupts = <44>;
-				clocks = <&clks 76>, <&clks 76>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart1: serial@43f90000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x43f90000 0x4000>;
-				interrupts = <45>;
-				clocks = <&clks 120>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@43f94000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x43f94000 0x4000>;
-				interrupts = <32>;
-				clocks = <&clks 121>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c2: i2c@43f98000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
-				reg = <0x43f98000 0x4000>;
-				clocks = <&clks 48>;
-				clock-names = "";
-				interrupts = <4>;
-				status = "disabled";
-			};
-
-			owire@43f9c000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x43f9c000 0x4000>;
-				clocks = <&clks 51>;
-				clock-names = "";
-				interrupts = <2>;
-				status = "disabled";
-			};
-
-			spi1: spi@43fa4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
-				reg = <0x43fa4000 0x4000>;
-				clocks = <&clks 78>, <&clks 78>;
-				clock-names = "ipg", "per";
-				interrupts = <14>;
-				status = "disabled";
-			};
-
-			kpp: kpp@43fa8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
-				reg = <0x43fa8000 0x4000>;
-				clocks = <&clks 102>;
-				clock-names = "";
-				interrupts = <24>;
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@43fac000 {
-				compatible = "fsl,imx25-iomuxc";
-				reg = <0x43fac000 0x4000>;
-			};
-
-			audmux: audmux@43fb0000 {
-				compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
-				reg = <0x43fb0000 0x4000>;
-				status = "disabled";
-			};
-		};
-
-		spba-bus@50000000 {
-			compatible = "fsl,spba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x40000>;
-			ranges;
-
-			spi3: spi@50004000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
-				reg = <0x50004000 0x4000>;
-				interrupts = <0>;
-				clocks = <&clks 80>, <&clks 80>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@50008000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x50008000 0x4000>;
-				interrupts = <5>;
-				clocks = <&clks 123>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@5000c000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x5000c000 0x4000>;
-				interrupts = <18>;
-				clocks = <&clks 122>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			spi2: spi@50010000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
-				reg = <0x50010000 0x4000>;
-				clocks = <&clks 79>, <&clks 79>;
-				clock-names = "ipg", "per";
-				interrupts = <13>;
-				status = "disabled";
-			};
-
-			ssi2: ssi@50014000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
-				reg = <0x50014000 0x4000>;
-				interrupts = <11>;
-				clocks = <&clks 118>;
-				clock-names = "ipg";
-				dmas = <&sdma 24 1 0>,
-				       <&sdma 25 1 0>;
-				dma-names = "rx", "tx";
-				fsl,fifo-depth = <15>;
-				status = "disabled";
-			};
-
-			esai@50018000 {
-				reg = <0x50018000 0x4000>;
-				interrupts = <7>;
-			};
-
-			uart5: serial@5002c000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x5002c000 0x4000>;
-				interrupts = <40>;
-				clocks = <&clks 124>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			tscadc: tscadc@50030000 {
-				compatible = "fsl,imx25-tsadc";
-				reg = <0x50030000 0xc>;
-				interrupts = <46>;
-				clocks = <&clks 119>;
-				clock-names = "ipg";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				status = "disabled";
-				ranges;
-
-				adc: adc@50030800 {
-					compatible = "fsl,imx25-gcq";
-					reg = <0x50030800 0x60>;
-					interrupt-parent = <&tscadc>;
-					interrupts = <1>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					status = "disabled";
-				};
-
-				tsc: tcq@50030400 {
-					compatible = "fsl,imx25-tcq";
-					reg = <0x50030400 0x60>;
-					interrupt-parent = <&tscadc>;
-					interrupts = <0>;
-					fsl,wires = <4>;
-					status = "disabled";
-				};
-			};
-
-			ssi1: ssi@50034000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
-				reg = <0x50034000 0x4000>;
-				interrupts = <12>;
-				clocks = <&clks 117>;
-				clock-names = "ipg";
-				dmas = <&sdma 28 1 0>,
-				       <&sdma 29 1 0>;
-				dma-names = "rx", "tx";
-				fsl,fifo-depth = <15>;
-				status = "disabled";
-			};
-
-			fec: ethernet@50038000 {
-				compatible = "fsl,imx25-fec";
-				reg = <0x50038000 0x4000>;
-				interrupts = <57>;
-				clocks = <&clks 88>, <&clks 65>;
-				clock-names = "ipg", "ahb";
-				status = "disabled";
-			};
-		};
-
-		bus@53f00000 { /* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x53f00000 0x100000>;
-			ranges;
-
-			aips2: bridge@53f00000 {
-				compatible = "fsl,imx25-aips";
-				reg = <0x53f00000 0x4000>;
-			};
-
-			clks: ccm@53f80000 {
-				compatible = "fsl,imx25-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <31>;
-				#clock-cells = <1>;
-			};
-
-			gpt4: timer@53f84000 {
-				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
-				reg = <0x53f84000 0x4000>;
-				clocks = <&clks 95>, <&clks 47>;
-				clock-names = "ipg", "per";
-				interrupts = <1>;
-			};
-
-			gpt3: timer@53f88000 {
-				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
-				reg = <0x53f88000 0x4000>;
-				clocks = <&clks 94>, <&clks 47>;
-				clock-names = "ipg", "per";
-				interrupts = <29>;
-			};
-
-			gpt2: timer@53f8c000 {
-				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
-				reg = <0x53f8c000 0x4000>;
-				clocks = <&clks 93>, <&clks 47>;
-				clock-names = "ipg", "per";
-				interrupts = <53>;
-			};
-
-			gpt1: timer@53f90000 {
-				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
-				reg = <0x53f90000 0x4000>;
-				clocks = <&clks 92>, <&clks 47>;
-				clock-names = "ipg", "per";
-				interrupts = <54>;
-			};
-
-			epit1: timer@53f94000 {
-				compatible = "fsl,imx25-epit";
-				reg = <0x53f94000 0x4000>;
-				clocks = <&clks 83>, <&clks 43>;
-				clock-names = "ipg", "per";
-				interrupts = <28>;
-			};
-
-			epit2: timer@53f98000 {
-				compatible = "fsl,imx25-epit";
-				reg = <0x53f98000 0x4000>;
-				clocks = <&clks 84>, <&clks 43>;
-				clock-names = "ipg", "per";
-				interrupts = <27>;
-			};
-
-			gpio4: gpio@53f9c000 {
-				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
-				reg = <0x53f9c000 0x4000>;
-				interrupts = <23>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			pwm2: pwm@53fa0000 {
-				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <3>;
-				reg = <0x53fa0000 0x4000>;
-				clocks = <&clks 106>, <&clks 52>;
-				clock-names = "ipg", "per";
-				interrupts = <36>;
-			};
-
-			gpio3: gpio@53fa4000 {
-				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
-				reg = <0x53fa4000 0x4000>;
-				interrupts = <16>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			pwm3: pwm@53fa8000 {
-				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <3>;
-				reg = <0x53fa8000 0x4000>;
-				clocks = <&clks 107>, <&clks 52>;
-				clock-names = "ipg", "per";
-				interrupts = <41>;
-			};
-
-			scc: crypto@53fac000 {
-				compatible = "fsl,imx25-scc";
-				reg = <0x53fac000 0x4000>;
-				clocks = <&clks 111>;
-				clock-names = "ipg";
-				interrupts = <49>, <50>;
-				interrupt-names = "scm", "smn";
-			};
-
-			rngb: rngb@53fb0000 {
-				compatible = "fsl,imx25-rngb";
-				reg = <0x53fb0000 0x4000>;
-				clocks = <&clks 109>;
-				interrupts = <22>;
-			};
-
-			esdhc1: mmc@53fb4000 {
-				compatible = "fsl,imx25-esdhc";
-				reg = <0x53fb4000 0x4000>;
-				interrupts = <9>;
-				clocks = <&clks 86>, <&clks 63>, <&clks 45>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			esdhc2: mmc@53fb8000 {
-				compatible = "fsl,imx25-esdhc";
-				reg = <0x53fb8000 0x4000>;
-				interrupts = <8>;
-				clocks = <&clks 87>, <&clks 64>, <&clks 46>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			lcdc: lcdc@53fbc000 {
-				compatible = "fsl,imx25-fb", "fsl,imx21-fb";
-				reg = <0x53fbc000 0x4000>;
-				interrupts = <39>;
-				clocks = <&clks 103>, <&clks 66>, <&clks 49>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			slcdc@53fc0000 {
-				reg = <0x53fc0000 0x4000>;
-				interrupts = <38>;
-				status = "disabled";
-			};
-
-			pwm4: pwm@53fc8000 {
-				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <3>;
-				reg = <0x53fc8000 0x4000>;
-				clocks = <&clks 108>, <&clks 52>;
-				clock-names = "ipg", "per";
-				interrupts = <42>;
-			};
-
-			gpio1: gpio@53fcc000 {
-				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
-				reg = <0x53fcc000 0x4000>;
-				interrupts = <52>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@53fd0000 {
-				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
-				reg = <0x53fd0000 0x4000>;
-				interrupts = <51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			sdma: dma-controller@53fd4000 {
-				compatible = "fsl,imx25-sdma";
-				reg = <0x53fd4000 0x4000>;
-				clocks = <&clks 112>, <&clks 68>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				interrupts = <34>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
-			};
-
-			watchdog@53fdc000 {
-				compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
-				reg = <0x53fdc000 0x4000>;
-				clocks = <&clks 126>;
-				clock-names = "";
-				interrupts = <55>;
-			};
-
-			pwm1: pwm@53fe0000 {
-				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <3>;
-				reg = <0x53fe0000 0x4000>;
-				clocks = <&clks 105>, <&clks 52>;
-				clock-names = "ipg", "per";
-				interrupts = <26>;
-			};
-
-			iim: efuse@53ff0000 {
-				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
-				reg = <0x53ff0000 0x4000>;
-				interrupts = <19>;
-				clocks = <&clks 99>;
-			};
-
-			usbotg: usb@53ff4000 {
-				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
-				reg = <0x53ff4000 0x0200>;
-				interrupts = <37>;
-				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
-				clock-names = "ipg", "ahb", "per";
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,usbphy = <&usbphy0>;
-				phy_type = "utmi";
-				dr_mode = "otg";
-				status = "disabled";
-			};
-
-			usbhost1: usb@53ff4400 {
-				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
-				reg = <0x53ff4400 0x0200>;
-				interrupts = <35>;
-				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
-				clock-names = "ipg", "ahb", "per";
-				fsl,usbmisc = <&usbmisc 1>;
-				fsl,usbphy = <&usbphy1>;
-				maximum-speed = "full-speed";
-				phy_type = "serial";
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@53ff4600 {
-				#index-cells = <1>;
-				compatible = "fsl,imx25-usbmisc";
-				reg = <0x53ff4600 0x00f>;
-			};
-
-			dryice@53ffc000 {
-				compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
-				reg = <0x53ffc000 0x4000>;
-				clocks = <&clks 81>;
-				clock-names = "ipg";
-				interrupts = <25 56>;
-			};
-		};
-
-		iram: sram@78000000 {
-			compatible = "mmio-sram";
-			reg = <0x78000000 0x20000>;
-		};
-
-		emi@80000000 {
-			compatible = "fsl,emi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x3b002000>;
-			ranges;
-
-			nfc: nand@bb000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				compatible = "fsl,imx25-nand";
-				reg = <0xbb000000 0x2000>;
-				clocks = <&clks 50>;
-				clock-names = "";
-				interrupts = <33>;
-				status = "disabled";
-			};
-		};
-	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usb-phy@0 {
-			reg = <0>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-
-		usbphy1: usb-phy@1 {
-			reg = <1>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
deleted file mode 100644
index 745d5d4099525..0000000000000
--- a/arch/arm/boot/dts/imx27-apf27.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
- * Copyright 2012 Armadeus Systems <support@armadeus.com>
- *
- * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Armadeus Systems APF27 module";
-	compatible = "armadeus,imx27-apf27", "fsl,imx27";
-
-	memory@a0000000 {
-		device_type = "memory";
-		reg = <0xa0000000 0x04000000>;
-	};
-};
-
-&clk_osc26m {
-	clock-frequency = <0>;
-};
-
-&iomuxc {
-	imx27-apf27 {
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD 0x0
-				MX27_PAD_UART1_RXD__UART1_RXD 0x0
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&nfc {
-	status = "okay";
-	nand-bus-width = <16>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0 0x100000>;
-	};
-
-	partition@100000 {
-		label = "env";
-		reg = <0x100000 0x80000>;
-	};
-
-	partition@180000 {
-		label = "env2";
-		reg = <0x180000 0x80000>;
-	};
-
-	partition@200000 {
-		label = "firmware";
-		reg = <0x200000 0x80000>;
-	};
-
-	partition@280000 {
-		label = "dtb";
-		reg = <0x280000 0x80000>;
-	};
-
-	partition@300000 {
-		label = "kernel";
-		reg = <0x300000 0x500000>;
-	};
-
-	partition@800000 {
-		label = "rootfs";
-		reg = <0x800000 0xf800000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
deleted file mode 100644
index 6f1e8ce9e76e9..0000000000000
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ /dev/null
@@ -1,256 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Armadeus Systems - <support@armadeus.com>
- */
-
-/* APF27Dev is a docking board for the APF27 SOM */
-#include "imx27-apf27.dts"
-
-/ {
-	model = "Armadeus Systems APF27Dev docking/development board";
-	compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27";
-
-	display: display {
-		model = "Chimei-LW700AT9003";
-		bits-per-pixel = <16>;  /* non-standard but required */
-		fsl,pcr = <0xfae80083>;	/* non-standard but required */
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: 800x480 {
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		user-key {
-			label = "user";
-			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
-			linux,code = <276>; /* BTN_EXTRA */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_max5821: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "max5821-reg";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&cspi1 {
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
-	status = "okay";
-
-	adc@0 {
-		compatible = "maxim,max1027";
-		reg = <0>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_max1027>;
-		spi-max-frequency = <10000000>;
-	};
-};
-
-&cspi2 {
-	cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
-		   <&gpio4 27 GPIO_ACTIVE_LOW>,
-		   <&gpio2 17 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi2 &pinctrl_cspi2_cs>;
-	status = "okay";
-};
-
-&fb {
-	display = <&display>;
-	fsl,dmacr = <0x00020010>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_imxfb1>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	rtc@68 {
-		compatible = "dallas,ds1374";
-		reg = <0x68>;
-	};
-
-	max5821@38 {
-		compatible = "maxim,max5821";
-		reg = <0x38>;
-		vref-supply = <&reg_max5821>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx27-apf27dev {
-		pinctrl_cspi1: cspi1grp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
-				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
-				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
-			>;
-		};
-
-		pinctrl_cspi1_cs: cspi1csgrp {
-			fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
-		};
-
-		pinctrl_cspi2: cspi2grp {
-			fsl,pins = <
-				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
-				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
-				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
-			>;
-		};
-
-		pinctrl_cspi2_cs: cspi2csgrp {
-			fsl,pins = <
-				MX27_PAD_CSI_D5__GPIO2_17 0x0
-				MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
-				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
-		};
-
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
-		};
-
-		pinctrl_imxfb1: imxfbgrp {
-			fsl,pins = <
-				MX27_PAD_CLS__CLS 0x0
-				MX27_PAD_CONTRAST__CONTRAST 0x0
-				MX27_PAD_LD0__LD0 0x0
-				MX27_PAD_LD1__LD1 0x0
-				MX27_PAD_LD2__LD2 0x0
-				MX27_PAD_LD3__LD3 0x0
-				MX27_PAD_LD4__LD4 0x0
-				MX27_PAD_LD5__LD5 0x0
-				MX27_PAD_LD6__LD6 0x0
-				MX27_PAD_LD7__LD7 0x0
-				MX27_PAD_LD8__LD8 0x0
-				MX27_PAD_LD9__LD9 0x0
-				MX27_PAD_LD10__LD10 0x0
-				MX27_PAD_LD11__LD11 0x0
-				MX27_PAD_LD12__LD12 0x0
-				MX27_PAD_LD13__LD13 0x0
-				MX27_PAD_LD14__LD14 0x0
-				MX27_PAD_LD15__LD15 0x0
-				MX27_PAD_LD16__LD16 0x0
-				MX27_PAD_LD17__LD17 0x0
-				MX27_PAD_LSCLK__LSCLK 0x0
-				MX27_PAD_OE_ACD__OE_ACD 0x0
-				MX27_PAD_PS__PS 0x0
-				MX27_PAD_REV__REV 0x0
-				MX27_PAD_SPL_SPR__SPL_SPR 0x0
-				MX27_PAD_HSYNC__HSYNC 0x0
-				MX27_PAD_VSYNC__VSYNC 0x0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX27_PAD_I2C_DATA__I2C_DATA 0x0
-				MX27_PAD_I2C_CLK__I2C_CLK 0x0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_max1027: max1027 {
-			 fsl,pins = <
-				 MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */
-				 MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */
-			>;
-		};
-
-		pinctrl_pwm: pwmgrp {
-			fsl,pins = <
-				MX27_PAD_PWMO__PWMO 0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK 0x0
-				MX27_PAD_SD2_CMD__SD2_CMD 0x0
-				MX27_PAD_SD2_D0__SD2_D0 0x0
-				MX27_PAD_SD2_D1__SD2_D1 0x0
-				MX27_PAD_SD2_D2__SD2_D2 0x0
-				MX27_PAD_SD2_D3__SD2_D3 0x0
-			>;
-		};
-
-		pinctrl_sdhc2_cd: sdhc2cdgrp {
-			fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
-		};
-	};
-};
-
-&sdhci2 {
-	bus-width = <4>;
-	cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2 &pinctrl_sdhc2_cd>;
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm>;
-};
diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
deleted file mode 100644
index 74110bbcd9d4f..0000000000000
--- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
+++ /dev/null
@@ -1,284 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX27";
-	compatible = "eukrea,cpuimx27", "fsl,imx27";
-
-	memory@a0000000 {
-		device_type = "memory";
-		reg = <0xa0000000 0x04000000>;
-	};
-
-	clk14745600: clk-uart {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <14745600>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire>;
-	status = "okay";
-};
-
-&sdhci2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh2>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	phy_type = "ulpi";
-	disable-over-current;
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	nor: nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0 0x00000000 0x04000000>;
-		bank-width = <2>;
-		linux,mtd-name = "physmap-flash.0";
-		fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
-	};
-
-	uart8250@3,200000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_1>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x200000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-
-	uart8250@3,400000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_2>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x400000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-
-	uart8250@3,800000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_3>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x800000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-
-	uart8250@3,1000000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_4>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x1000000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-};
-
-&iomuxc {
-	imx27-eukrea-cpuimx27 {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0		0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1		0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2		0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3		0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER		0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1		0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2		0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3		0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO		0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC		0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS		0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK		0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0		0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV		0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK		0x0
-				MX27_PAD_ATA_DATA13__FEC_COL		0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER		0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN		0x0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX27_PAD_I2C_DATA__I2C_DATA		0x0
-				MX27_PAD_I2C_CLK__I2C_CLK		0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB			0x0
-				MX27_PAD_NFCLE__NFCLE			0x0
-				MX27_PAD_NFWP_B__NFWP_B			0x0
-				MX27_PAD_NFCE_B__NFCE_B			0x0
-				MX27_PAD_NFALE__NFALE			0x0
-				MX27_PAD_NFRE_B__NFRE_B			0x0
-				MX27_PAD_NFWE_B__NFWE_B			0x0
-			>;
-		};
-
-		pinctrl_owire: owiregrp {
-			fsl,pins = <
-				MX27_PAD_RTCK__OWIRE			0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK		0x0
-				MX27_PAD_SD2_CMD__SD2_CMD		0x0
-				MX27_PAD_SD2_D0__SD2_D0			0x0
-				MX27_PAD_SD2_D1__SD2_D1			0x0
-				MX27_PAD_SD2_D2__SD2_D2			0x0
-				MX27_PAD_SD2_D3__SD2_D3			0x0
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_TXDM__UART4_TXD		0x0
-				MX27_PAD_USBH1_RXDP__UART4_RXD		0x0
-				MX27_PAD_USBH1_TXDP__UART4_CTS		0x0
-				MX27_PAD_USBH1_FS__UART4_RTS		0x0
-			>;
-		};
-
-		pinctrl_uart8250_1: uart82501grp {
-			fsl,pins = <
-				MX27_PAD_USB_PWR__GPIO2_23		0x0
-			>;
-		};
-
-		pinctrl_uart8250_2: uart82502grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0
-			>;
-		};
-
-		pinctrl_uart8250_3: uart82503grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_OE_B__GPIO2_27		0x0
-			>;
-		};
-
-		pinctrl_uart8250_4: uart82504grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_RXDM__GPIO2_30		0x0
-			>;
-		};
-
-		pinctrl_usbh2: usbh2grp {
-			fsl,pins = <
-				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
-				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
-				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
-				MX27_PAD_USBH2_STP__USBH2_STP		0x0
-				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
-				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
-				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
-				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
-				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
-				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
-				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
-				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
-				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
-				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
-				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
-				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
-				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
-				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
-				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
-				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
-				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
-				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
-				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
deleted file mode 100644
index 9c3ec82ec7e5a..0000000000000
--- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-#include "imx27-eukrea-cpuimx27.dtsi"
-
-/ {
-	model = "Eukrea MBIMXSD27";
-	compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
-
-	display0: CMO-QVGA {
-		model = "CMO-QVGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xfad08b80>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: 320x240 {
-				clock-frequency = <6500000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <20>;
-				hsync-len = <30>;
-				hfront-porch = <38>;
-				vback-porch = <4>;
-				vsync-len = <3>;
-				vfront-porch = <15>;
-			};
-		};
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioleds>;
-
-		led1 {
-			label = "system::live";
-			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "system::user";
-			gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		reg_lcd: regulator@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcdreg>;
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "LCD";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-};
-
-&cspi1 {
-	pinctrl-0 = <&pinctrl_cspi1>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	ads7846@0 {
-		compatible = "ti,ads7846";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch>;
-		reg = <0>;
-		interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
-		spi-cpol;
-		spi-max-frequency = <1500000>;
-		ti,keep-vref-on;
-	};
-};
-
-&fb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_imxfb>;
-	display = <&display0>;
-	lcd-supply = <&reg_lcd>;
-	fsl,dmacr = <0x00040060>;
-	fsl,lscr1 = <0x00120300>;
-	fsl,lpccr = <0x00a903ff>;
-	status = "okay";
-};
-
-&i2c1 {
-	codec: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&kpp {
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_UP)
-		MATRIX_KEY(0, 1, KEY_DOWN)
-		MATRIX_KEY(1, 0, KEY_RIGHT)
-		MATRIX_KEY(1, 1, KEY_LEFT)
-	>;
-	status = "okay";
-};
-
-&sdhci1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc1>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&ssi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ssi1>;
-	codec-handle = <&codec>;
-	status = "okay";
-};
-
-&uart1 {
-	uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx27-eukrea-cpuimx27-baseboard {
-		pinctrl_cspi1: cspi1grp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_MISO__CSPI1_MISO	0x0
-				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI	0x0
-				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK	0x0
-				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* CS0 */
-			>;
-		};
-
-		pinctrl_backlight: backlightgrp {
-			fsl,pins = <
-				MX27_PAD_PWMO__GPIO5_5		0x0
-			>;
-		};
-
-		pinctrl_gpioleds: gpioledsgrp {
-			fsl,pins = <
-				MX27_PAD_PC_PWRON__GPIO6_16	0x0
-				MX27_PAD_PC_CD2_B__GPIO6_19	0x0
-			>;
-		};
-
-		pinctrl_imxfb: imxfbgrp {
-			fsl,pins = <
-				MX27_PAD_LD0__LD0		0x0
-				MX27_PAD_LD1__LD1		0x0
-				MX27_PAD_LD2__LD2		0x0
-				MX27_PAD_LD3__LD3		0x0
-				MX27_PAD_LD4__LD4		0x0
-				MX27_PAD_LD5__LD5		0x0
-				MX27_PAD_LD6__LD6		0x0
-				MX27_PAD_LD7__LD7		0x0
-				MX27_PAD_LD8__LD8		0x0
-				MX27_PAD_LD9__LD9		0x0
-				MX27_PAD_LD10__LD10		0x0
-				MX27_PAD_LD11__LD11		0x0
-				MX27_PAD_LD12__LD12		0x0
-				MX27_PAD_LD13__LD13		0x0
-				MX27_PAD_LD14__LD14		0x0
-				MX27_PAD_LD15__LD15		0x0
-				MX27_PAD_LD16__LD16		0x0
-				MX27_PAD_LD17__LD17		0x0
-				MX27_PAD_CONTRAST__CONTRAST	0x0
-				MX27_PAD_OE_ACD__OE_ACD		0x0
-				MX27_PAD_HSYNC__HSYNC		0x0
-				MX27_PAD_VSYNC__VSYNC		0x0
-			>;
-		};
-
-		pinctrl_lcdreg: lcdreggrp {
-			fsl,pins = <
-				MX27_PAD_CLS__GPIO1_25		0x0
-			>;
-		};
-
-		pinctrl_sdhc1: sdhc1grp {
-			fsl,pins = <
-				MX27_PAD_SD1_CLK__SD1_CLK	0x0
-				MX27_PAD_SD1_CMD__SD1_CMD	0x0
-				MX27_PAD_SD1_D0__SD1_D0		0x0
-				MX27_PAD_SD1_D1__SD1_D1		0x0
-				MX27_PAD_SD1_D2__SD1_D2		0x0
-				MX27_PAD_SD1_D3__SD1_D3		0x0
-			>;
-		};
-
-		pinctrl_ssi1: ssi1grp {
-			fsl,pins = <
-				MX27_PAD_SSI4_CLK__SSI4_CLK	0x0
-				MX27_PAD_SSI4_FS__SSI4_FS	0x0
-				MX27_PAD_SSI4_RXDAT__SSI4_RXDAT	0x1
-				MX27_PAD_SSI4_TXDAT__SSI4_TXDAT	0x1
-			>;
-		};
-
-		pinctrl_touch: touchgrp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_RDY__GPIO4_25	0x0 /* IRQ */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD	0x0
-				MX27_PAD_UART1_RXD__UART1_RXD	0x0
-				MX27_PAD_UART1_CTS__UART1_CTS	0x0
-				MX27_PAD_UART1_RTS__UART1_RTS	0x0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX27_PAD_UART2_TXD__UART2_TXD	0x0
-				MX27_PAD_UART2_RXD__UART2_RXD	0x0
-				MX27_PAD_UART2_CTS__UART2_CTS	0x0
-				MX27_PAD_UART2_RTS__UART2_RTS	0x0
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX27_PAD_UART3_TXD__UART3_TXD	0x0
-				MX27_PAD_UART3_RXD__UART3_RXD	0x0
-				MX27_PAD_UART3_CTS__UART3_CTS	0x0
-				MX27_PAD_UART3_RTS__UART3_RTS	0x0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
deleted file mode 100644
index 35123b7cb6b3e..0000000000000
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ /dev/null
@@ -1,191 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Sascha Hauer, Pengutronix
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Freescale i.MX27 Product Development Kit";
-	compatible = "fsl,imx27-pdk", "fsl,imx27";
-
-	memory@a0000000 {
-		device_type = "memory";
-		reg = <0xa0000000 0x08000000>;
-	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
-	};
-};
-
-&cspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi2>;
-	cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	pmic: mc13783@0 {
-		compatible = "fsl,mc13783";
-		reg = <0>;
-		spi-cs-high;
-		spi-max-frequency = <1000000>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-
-		regulators {
-			vgen_reg: vgen {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vmmc1_reg: vmmc1 {
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			gpo1_reg: gpo1 {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			gpo3_reg: gpo3 {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&fec {
-	phy-mode = "mii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&kpp {
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_UP)
-		MATRIX_KEY(0, 1, KEY_DOWN)
-		MATRIX_KEY(1, 0, KEY_RIGHT)
-		MATRIX_KEY(1, 1, KEY_LEFT)
-		MATRIX_KEY(1, 2, KEY_ENTER)
-		MATRIX_KEY(2, 0, KEY_F6)
-		MATRIX_KEY(2, 1, KEY_F8)
-		MATRIX_KEY(2, 2, KEY_F9)
-		MATRIX_KEY(2, 3, KEY_F10)
-	>;
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart1 {
-	uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	fsl,usbphy = <&usbphy0>;
-	phy_type = "ulpi";
-	status = "okay";
-};
-
-&iomuxc {
-	imx27-pdk {
-		pinctrl_cspi2: cspi2grp {
-			fsl,pins = <
-				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
-				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
-				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
-				MX27_PAD_CSPI2_SS0__GPIO4_21	0x0 /* SPI2 CS0 */
-				MX27_PAD_TOUT__GPIO3_14		0x0 /* PMIC IRQ */
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB	0x0
-				MX27_PAD_NFCLE__NFCLE	0x0
-				MX27_PAD_NFWP_B__NFWP_B	0x0
-				MX27_PAD_NFCE_B__NFCE_B	0x0
-				MX27_PAD_NFALE__NFALE	0x0
-				MX27_PAD_NFRE_B__NFRE_B	0x0
-				MX27_PAD_NFWE_B__NFWE_B	0x0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD 0x0
-				MX27_PAD_UART1_RXD__UART1_RXD 0x0
-				MX27_PAD_UART1_CTS__UART1_CTS 0x0
-				MX27_PAD_UART1_RTS__UART1_RTS 0x0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
-				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
-				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
-				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
-				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
-				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
-				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
-				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
-				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
-				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
-				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
-				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
deleted file mode 100644
index 188639738dc3e..0000000000000
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Markus Pargmann, Pengutronix
- */
-
-#include "imx27-phytec-phycard-s-som.dtsi"
-
-/ {
-	model = "Phytec pca100 rapid development kit";
-	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	display: display {
-		model = "Primeview-PD050VL1";
-		bits-per-pixel = <16>;  /* non-standard but required */
-		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: 640x480 {
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <112>;
-				hfront-porch = <36>;
-				hsync-len = <32>;
-				vback-porch = <33>;
-				vfront-porch = <33>;
-				vsync-len = <2>;
-				clock-frequency = <25000000>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&fb {
-	display = <&display>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	adc@64 {
-		compatible = "maxim,max1037";
-		vcc-supply = <&reg_3v3>;
-		reg = <0x64>;
-	};
-};
-
-&iomuxc {
-	imx27-phycard-s-rdk {
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX27_PAD_I2C_DATA__I2C_DATA 0x0
-				MX27_PAD_I2C_CLK__I2C_CLK 0x0
-			>;
-		};
-
-		pinctrl_owire1: owire1grp {
-			fsl,pins = <
-				MX27_PAD_RTCK__OWIRE 0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK 0x0
-				MX27_PAD_SD2_CMD__SD2_CMD 0x0
-				MX27_PAD_SD2_D0__SD2_D0 0x0
-				MX27_PAD_SD2_D1__SD2_D1 0x0
-				MX27_PAD_SD2_D2__SD2_D2 0x0
-				MX27_PAD_SD2_D3__SD2_D3 0x0
-				MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD 0x0
-				MX27_PAD_UART1_RXD__UART1_RXD 0x0
-				MX27_PAD_UART1_CTS__UART1_CTS 0x0
-				MX27_PAD_UART1_RTS__UART1_RTS 0x0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX27_PAD_UART2_TXD__UART2_TXD 0x0
-				MX27_PAD_UART2_RXD__UART2_RXD 0x0
-				MX27_PAD_UART2_CTS__UART2_CTS 0x0
-				MX27_PAD_UART2_RTS__UART2_RTS 0x0
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX27_PAD_UART3_TXD__UART3_TXD 0x0
-				MX27_PAD_UART3_RXD__UART3_RXD 0x0
-				MX27_PAD_UART3_CTS__UART3_CTS 0x0
-				MX27_PAD_UART3_RTS__UART3_RTS 0x0
-			>;
-		};
-	};
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire1>;
-	status = "okay";
-};
-
-&sdhci2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2>;
-	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&uart1 {
-	uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
deleted file mode 100644
index 303f920201c50..0000000000000
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
- * and Markus Pargmann, Pengutronix
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pca100";
-	compatible = "phytec,imx27-pca100", "fsl,imx27";
-
-	memory@a0000000 {
-		device_type = "memory";
-		reg = <0xa0000000 0x08000000>; /* 128MB */
-	};
-};
-
-&cspi1 {
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
-		   <&gpio4 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
-
-&iomuxc {
-	imx27-phycard-s-som {
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB 0x0
-				MX27_PAD_NFCLE__NFCLE 0x0
-				MX27_PAD_NFWP_B__NFWP_B 0x0
-				MX27_PAD_NFCE_B__NFCE_B 0x0
-				MX27_PAD_NFALE__NFALE 0x0
-				MX27_PAD_NFRE_B__NFRE_B 0x0
-				MX27_PAD_NFWE_B__NFWE_B 0x0
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
deleted file mode 100644
index 344e777901524..0000000000000
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ /dev/null
@@ -1,319 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- */
-
-#include "imx27-phytec-phycore-som.dtsi"
-
-/ {
-	model = "Phytec pcm970";
-	compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	display0: LQ035Q7 {
-		model = "Sharp-LQ035Q7";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xf00080c0>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: 240x320 {
-				clock-frequency = <5500000>;
-				hactive = <240>;
-				vactive = <320>;
-				hback-porch = <5>;
-				hsync-len = <7>;
-				hfront-porch = <16>;
-				vback-porch = <7>;
-				vsync-len = <1>;
-				vfront-porch = <9>;
-				pixelclk-active = <1>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				de-active = <0>;
-			};
-		};
-	};
-
-	regulators {
-		regulator@2 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_csien>;
-			reg = <2>;
-			regulator-name = "CSI_EN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
-			regulator-always-on;
-		};
-	};
-
-	usbphy {
-		usbphy2: usbphy@2 {
-			compatible = "usb-nop-xceiv";
-			reg = <2>;
-			vcc-supply = <&reg_5v0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
-	};
-};
-
-&cspi1 {
-	pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
-		   <&gpio4 27 GPIO_ACTIVE_LOW>;
-};
-
-&fb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_imxfb1>;
-	display = <&display0>;
-	lcd-supply = <&reg_5v0>;
-	fsl,dmacr = <0x00020010>;
-	fsl,lscr1 = <0x00120300>;
-	fsl,lpccr = <0x00a903ff>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	camgpio: pca9536@41 {
-		compatible = "nxp,pca9536";
-		reg = <0x41>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&iomuxc {
-	imx27_phycore_rdk {
-		pinctrl_csien: csiengrp {
-			fsl,pins = <
-				MX27_PAD_USB_OC_B__GPIO2_24 0x0
-			>;
-		};
-
-		pinctrl_cspi1cs1: cspi1cs1grp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
-			>;
-		};
-
-		pinctrl_imxfb1: imxfbgrp {
-			fsl,pins = <
-				MX27_PAD_LD0__LD0 0x0
-				MX27_PAD_LD1__LD1 0x0
-				MX27_PAD_LD2__LD2 0x0
-				MX27_PAD_LD3__LD3 0x0
-				MX27_PAD_LD4__LD4 0x0
-				MX27_PAD_LD5__LD5 0x0
-				MX27_PAD_LD6__LD6 0x0
-				MX27_PAD_LD7__LD7 0x0
-				MX27_PAD_LD8__LD8 0x0
-				MX27_PAD_LD9__LD9 0x0
-				MX27_PAD_LD10__LD10 0x0
-				MX27_PAD_LD11__LD11 0x0
-				MX27_PAD_LD12__LD12 0x0
-				MX27_PAD_LD13__LD13 0x0
-				MX27_PAD_LD14__LD14 0x0
-				MX27_PAD_LD15__LD15 0x0
-				MX27_PAD_LD16__LD16 0x0
-				MX27_PAD_LD17__LD17 0x0
-				MX27_PAD_CLS__CLS 0x0
-				MX27_PAD_CONTRAST__CONTRAST 0x0
-				MX27_PAD_LSCLK__LSCLK 0x0
-				MX27_PAD_OE_ACD__OE_ACD 0x0
-				MX27_PAD_PS__PS 0x0
-				MX27_PAD_REV__REV 0x0
-				MX27_PAD_SPL_SPR__SPL_SPR 0x0
-				MX27_PAD_HSYNC__HSYNC 0x0
-				MX27_PAD_VSYNC__VSYNC 0x0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			/* Add pullup to DATA line */
-			fsl,pins = <
-				MX27_PAD_I2C_DATA__I2C_DATA	0x1
-				MX27_PAD_I2C_CLK__I2C_CLK	0x0
-			>;
-		};
-
-		pinctrl_owire1: owire1grp {
-			fsl,pins = <
-				MX27_PAD_RTCK__OWIRE 0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK 0x0
-				MX27_PAD_SD2_CMD__SD2_CMD 0x0
-				MX27_PAD_SD2_D0__SD2_D0 0x0
-				MX27_PAD_SD2_D1__SD2_D1 0x0
-				MX27_PAD_SD2_D2__SD2_D2 0x0
-				MX27_PAD_SD2_D3__SD2_D3 0x0
-				MX27_PAD_SSI3_FS__GPIO3_28	0x0 /* WP */
-				MX27_PAD_SSI3_RXDAT__GPIO3_29	0x0 /* CD */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD 0x0
-				MX27_PAD_UART1_RXD__UART1_RXD 0x0
-				MX27_PAD_UART1_CTS__UART1_CTS 0x0
-				MX27_PAD_UART1_RTS__UART1_RTS 0x0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX27_PAD_UART2_TXD__UART2_TXD 0x0
-				MX27_PAD_UART2_RXD__UART2_RXD 0x0
-				MX27_PAD_UART2_CTS__UART2_CTS 0x0
-				MX27_PAD_UART2_RTS__UART2_RTS 0x0
-			>;
-		};
-
-		pinctrl_usbh2: usbh2grp {
-			fsl,pins = <
-				MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
-				MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
-				MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
-				MX27_PAD_USBH2_STP__USBH2_STP 0x0
-				MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
-				MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
-				MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
-				MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
-				MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
-				MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
-				MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
-				MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
-			>;
-		};
-
-		pinctrl_weim: weimgrp {
-			fsl,pins = <
-				MX27_PAD_CS4_B__CS4_B		0x0 /* CS4 */
-				MX27_PAD_SD1_D1__GPIO5_19	0x0 /* CAN IRQ */
-			>;
-		};
-	};
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire1>;
-	status = "okay";
-};
-
-&pmicleds {
-	ledr1: led@3 {
-		reg = <3>;
-		label = "system:red1:user";
-	};
-
-	ledg1: led@4 {
-		reg = <4>;
-		label = "system:green1:user";
-	};
-
-	ledb1: led@5 {
-		reg = <5>;
-		label = "system:blue1:user";
-	};
-
-	ledr2: led@6 {
-		reg = <6>;
-		label = "system:red2:user";
-	};
-
-	ledg2: led@7 {
-		reg = <7>;
-		label = "system:green2:user";
-	};
-
-	ledb2: led@8 {
-		reg = <8>;
-		label = "system:blue2:user";
-	};
-
-	ledr3: led@9 {
-		reg = <9>;
-		label = "system:red3:nand";
-		linux,default-trigger = "nand-disk";
-	};
-
-	ledg3: led@10 {
-		reg = <10>;
-		label = "system:green3:live";
-		linux,default-trigger = "heartbeat";
-	};
-
-	ledb3: led@11 {
-		reg = <11>;
-		label = "system:blue3:cpu";
-		linux,default-trigger = "cpu0";
-	};
-};
-
-&sdhci2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&vmmc1_reg>;
-	status = "okay";
-};
-
-&uart1 {
-	uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh2>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	vbus-supply = <&reg_5v0>;
-	fsl,usbphy = <&usbphy2>;
-	disable-over-current;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim>;
-
-	can@4,0 {
-		compatible = "nxp,sja1000";
-		reg = <4 0x00000000 0x00000100>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
-		nxp,external-clock-frequency = <16000000>;
-		nxp,tx-output-config = <0x16>;
-		nxp,no-comparator-bypass;
-		fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
deleted file mode 100644
index 3d10273177e9b..0000000000000
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ /dev/null
@@ -1,344 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pcm038";
-	compatible = "phytec,imx27-pcm038", "fsl,imx27";
-
-	memory@a0000000 {
-		device_type = "memory";
-		reg = <0xa0000000 0x08000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		reg_5v0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			vcc-supply = <&sw3_reg>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	/* SSI0 <=> PINS_4 (MC13783 Audio) */
-	ssi0 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <0xcb205000>;
-	};
-
-	pins4 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <0x00001000>;
-	};
-};
-
-&cspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi1>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	pmic: mc13783@0 {
-		compatible = "fsl,mc13783";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		reg = <0>;
-		spi-cs-high;
-		spi-max-frequency = <20000000>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,mc13xxx-uses-adc;
-		fsl,mc13xxx-uses-rtc;
-
-		pmicleds: leds {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			led-control = <0x001 0x000 0x000 0x000 0x000 0x000>;
-		};
-
-		regulators {
-			/* SW1A and SW1B joined operation */
-			sw1_reg: sw1a {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1520000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* SW2A and SW2B joined operation */
-			sw2_reg: sw2a {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5000000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			violo_reg: violo {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			viohi_reg: viohi {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vgen_reg: vgen {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			vrf1_reg: vrf1 {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vrf2_reg: vrf2 {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vmmc1_reg: vmmc1 {
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			gpo1_reg: gpo1 { };
-
-			pwgt1spi_reg: pwgt1spi {
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&fec {
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
-	phy-supply = <&reg_3v3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	lm75@4a {
-		compatible = "national,lm75";
-		reg = <0x4a>;
-	};
-};
-
-&iomuxc {
-	imx27_phycore_som {
-		pinctrl_cspi1: cspi1grp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
-				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
-				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
-				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* SPI1 CS0 */
-			>;
-		};
-
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-				MX27_PAD_SSI3_TXDAT__GPIO3_30	0x0 /* FEC RST */
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB 0x0
-				MX27_PAD_NFCLE__NFCLE 0x0
-				MX27_PAD_NFWP_B__NFWP_B 0x0
-				MX27_PAD_NFCE_B__NFCE_B 0x0
-				MX27_PAD_NFALE__NFALE 0x0
-				MX27_PAD_NFRE_B__NFRE_B 0x0
-				MX27_PAD_NFWE_B__NFWE_B 0x0
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX27_PAD_USB_PWR__GPIO2_23	0x0 /* PMIC IRQ */
-			>;
-		};
-
-		pinctrl_ssi1: ssi1grp {
-			fsl,pins = <
-				MX27_PAD_SSI1_FS__SSI1_FS 0x0
-				MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
-				MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
-				MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
-				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
-				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
-				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
-				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
-				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
-				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
-				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
-				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
-				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
-				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
-				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&ssi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ssi1>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	phy_type = "ulpi";
-	fsl,usbphy = <&usbphy0>;
-	vbus-supply = <&sw3_reg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	nor: nor@0,0 {
-		compatible = "cfi-flash";
-		reg = <0 0x00000000 0x02000000>;
-		bank-width = <2>;
-		linux,mtd-name = "physmap-flash.0";
-		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	sram: sram@1,0 {
-		compatible = "mtd-ram";
-		reg = <1 0x00000000 0x00800000>;
-		bank-width = <2>;
-		linux,mtd-name = "mtd-ram.0";
-		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/imx27-pinfunc.h
deleted file mode 100644
index 75aea0c701d4c..0000000000000
--- a/arch/arm/boot/dts/imx27-pinfunc.h
+++ /dev/null
@@ -1,474 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
- */
-
-#ifndef __DTS_IMX27_PINFUNC_H
-#define __DTS_IMX27_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <pin mux_id>
- * mux_id consists of
- * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
- *
- * function:      0 - Primary function
- *                1 - Alternate function
- *                2 - GPIO
- * direction:     0 - Input
- *                1 - Output
- * gpio_oconf:    0 - A_IN
- *                1 - B_IN
- *                2 - C_IN
- *                3 - Data Register
- * gpio_iconfa/b: 0 - GPIO_IN
- *                1 - Interrupt Status Register
- *                2 - 0
- *                3 - 1
- *
- * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32
- * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is
- * the pin number on the specific port (between 0 and 31).
- */
-
-#define MX27_PAD_USBH2_CLK__USBH2_CLK                      0x00 0x000
-#define MX27_PAD_USBH2_CLK__GPIO1_0                        0x00 0x032
-#define MX27_PAD_USBH2_DIR__USBH2_DIR                      0x01 0x000
-#define MX27_PAD_USBH2_DIR__GPIO1_1                        0x01 0x032
-#define MX27_PAD_USBH2_DATA7__USBH2_DATA7                  0x02 0x004
-#define MX27_PAD_USBH2_DATA7__GPIO1_2                      0x02 0x032
-#define MX27_PAD_USBH2_NXT__USBH2_NXT                      0x03 0x000
-#define MX27_PAD_USBH2_NXT__GPIO1_3                        0x03 0x032
-#define MX27_PAD_USBH2_STP__USBH2_STP                      0x04 0x004
-#define MX27_PAD_USBH2_STP__GPIO1_4                        0x04 0x032
-#define MX27_PAD_LSCLK__LSCLK                              0x05 0x004
-#define MX27_PAD_LSCLK__GPIO1_5                            0x05 0x032
-#define MX27_PAD_LD0__LD0                                  0x06 0x004
-#define MX27_PAD_LD0__GPIO1_6                              0x06 0x032
-#define MX27_PAD_LD1__LD1                                  0x07 0x004
-#define MX27_PAD_LD1__GPIO1_7                              0x07 0x032
-#define MX27_PAD_LD2__LD2                                  0x08 0x004
-#define MX27_PAD_LD2__GPIO1_8                              0x08 0x032
-#define MX27_PAD_LD3__LD3                                  0x09 0x004
-#define MX27_PAD_LD3__GPIO1_9                              0x09 0x032
-#define MX27_PAD_LD4__LD4                                  0x0a 0x004
-#define MX27_PAD_LD4__GPIO1_10                             0x0a 0x032
-#define MX27_PAD_LD5__LD5                                  0x0b 0x004
-#define MX27_PAD_LD5__GPIO1_11                             0x0b 0x032
-#define MX27_PAD_LD6__LD6                                  0x0c 0x004
-#define MX27_PAD_LD6__GPIO1_12                             0x0c 0x032
-#define MX27_PAD_LD7__LD7                                  0x0d 0x004
-#define MX27_PAD_LD7__GPIO1_13                             0x0d 0x032
-#define MX27_PAD_LD8__LD8                                  0x0e 0x004
-#define MX27_PAD_LD8__GPIO1_14                             0x0e 0x032
-#define MX27_PAD_LD9__LD9                                  0x0f 0x004
-#define MX27_PAD_LD9__GPIO1_15                             0x0f 0x032
-#define MX27_PAD_LD10__LD10                                0x10 0x004
-#define MX27_PAD_LD10__GPIO1_16                            0x10 0x032
-#define MX27_PAD_LD11__LD11                                0x11 0x004
-#define MX27_PAD_LD11__GPIO1_17                            0x11 0x032
-#define MX27_PAD_LD12__LD12                                0x12 0x004
-#define MX27_PAD_LD12__GPIO1_18                            0x12 0x032
-#define MX27_PAD_LD13__LD13                                0x13 0x004
-#define MX27_PAD_LD13__GPIO1_19                            0x13 0x032
-#define MX27_PAD_LD14__LD14                                0x14 0x004
-#define MX27_PAD_LD14__GPIO1_20                            0x14 0x032
-#define MX27_PAD_LD15__LD15                                0x15 0x004
-#define MX27_PAD_LD15__GPIO1_21                            0x15 0x032
-#define MX27_PAD_LD16__LD16                                0x16 0x004
-#define MX27_PAD_LD16__GPIO1_22                            0x16 0x032
-#define MX27_PAD_LD17__LD17                                0x17 0x004
-#define MX27_PAD_LD17__GPIO1_23                            0x17 0x032
-#define MX27_PAD_REV__REV                                  0x18 0x004
-#define MX27_PAD_REV__GPIO1_24                             0x18 0x032
-#define MX27_PAD_CLS__CLS                                  0x19 0x004
-#define MX27_PAD_CLS__GPIO1_25                             0x19 0x032
-#define MX27_PAD_PS__PS                                    0x1a 0x004
-#define MX27_PAD_PS__GPIO1_26                              0x1a 0x032
-#define MX27_PAD_SPL_SPR__SPL_SPR                          0x1b 0x004
-#define MX27_PAD_SPL_SPR__GPIO1_27                         0x1b 0x032
-#define MX27_PAD_HSYNC__HSYNC                              0x1c 0x004
-#define MX27_PAD_HSYNC__GPIO1_28                           0x1c 0x032
-#define MX27_PAD_VSYNC__VSYNC                              0x1d 0x004
-#define MX27_PAD_VSYNC__GPIO1_29                           0x1d 0x032
-#define MX27_PAD_CONTRAST__CONTRAST                        0x1e 0x004
-#define MX27_PAD_CONTRAST__GPIO1_30                        0x1e 0x032
-#define MX27_PAD_OE_ACD__OE_ACD                            0x1f 0x004
-#define MX27_PAD_OE_ACD__GPIO1_31                          0x1f 0x032
-#define MX27_PAD_SD2_D0__SD2_D0                            0x24 0x004
-#define MX27_PAD_SD2_D0__MSHC_DATA0                        0x24 0x005
-#define MX27_PAD_SD2_D0__GPIO2_4                           0x24 0x032
-#define MX27_PAD_SD2_D1__SD2_D1                            0x25 0x004
-#define MX27_PAD_SD2_D1__MSHC_DATA1                        0x25 0x005
-#define MX27_PAD_SD2_D1__GPIO2_5                           0x25 0x032
-#define MX27_PAD_SD2_D2__SD2_D2                            0x26 0x004
-#define MX27_PAD_SD2_D2__MSHC_DATA2                        0x26 0x005
-#define MX27_PAD_SD2_D2__GPIO2_6                           0x26 0x032
-#define MX27_PAD_SD2_D3__SD2_D3                            0x27 0x004
-#define MX27_PAD_SD2_D3__MSHC_DATA3                        0x27 0x005
-#define MX27_PAD_SD2_D3__GPIO2_7                           0x27 0x032
-#define MX27_PAD_SD2_CMD__SD2_CMD                          0x28 0x004
-#define MX27_PAD_SD2_CMD__MSHC_BS                          0x28 0x005
-#define MX27_PAD_SD2_CMD__GPIO2_8                          0x28 0x032
-#define MX27_PAD_SD2_CLK__SD2_CLK                          0x29 0x004
-#define MX27_PAD_SD2_CLK__MSHC_SCLK                        0x29 0x005
-#define MX27_PAD_SD2_CLK__GPIO2_9                          0x29 0x032
-#define MX27_PAD_CSI_D0__CSI_D0                            0x2a 0x000
-#define MX27_PAD_CSI_D0__UART6_TXD                         0x2a 0x005
-#define MX27_PAD_CSI_D0__GPIO2_10                          0x2a 0x032
-#define MX27_PAD_CSI_D1__CSI_D1                            0x2b 0x000
-#define MX27_PAD_CSI_D1__UART6_RXD                         0x2b 0x001
-#define MX27_PAD_CSI_D1__GPIO2_11                          0x2b 0x032
-#define MX27_PAD_CSI_D2__CSI_D2                            0x2c 0x000
-#define MX27_PAD_CSI_D2__UART6_CTS                         0x2c 0x005
-#define MX27_PAD_CSI_D2__GPIO2_12                          0x2c 0x032
-#define MX27_PAD_CSI_D3__CSI_D3                            0x2d 0x000
-#define MX27_PAD_CSI_D3__UART6_RTS                         0x2d 0x001
-#define MX27_PAD_CSI_D3__GPIO2_13                          0x2d 0x032
-#define MX27_PAD_CSI_D4__CSI_D4                            0x2e 0x000
-#define MX27_PAD_CSI_D4__GPIO2_14                          0x2e 0x032
-#define MX27_PAD_CSI_MCLK__CSI_MCLK                        0x2f 0x004
-#define MX27_PAD_CSI_MCLK__GPIO2_15                        0x2f 0x032
-#define MX27_PAD_CSI_PIXCLK__CSI_PIXCLK                    0x30 0x000
-#define MX27_PAD_CSI_PIXCLK__GPIO2_16                      0x30 0x032
-#define MX27_PAD_CSI_D5__CSI_D5                            0x31 0x000
-#define MX27_PAD_CSI_D5__GPIO2_17                          0x31 0x032
-#define MX27_PAD_CSI_D6__CSI_D6                            0x32 0x000
-#define MX27_PAD_CSI_D6__UART5_TXD                         0x32 0x005
-#define MX27_PAD_CSI_D6__GPIO2_18                          0x32 0x032
-#define MX27_PAD_CSI_D7__CSI_D7                            0x33 0x000
-#define MX27_PAD_CSI_D7__UART5_RXD                         0x33 0x001
-#define MX27_PAD_CSI_D7__GPIO2_19                          0x33 0x032
-#define MX27_PAD_CSI_VSYNC__CSI_VSYNC                      0x34 0x000
-#define MX27_PAD_CSI_VSYNC__UART5_CTS                      0x34 0x005
-#define MX27_PAD_CSI_VSYNC__GPIO2_20                       0x34 0x032
-#define MX27_PAD_CSI_HSYNC__CSI_HSYNC                      0x35 0x000
-#define MX27_PAD_CSI_HSYNC__UART5_RTS                      0x35 0x001
-#define MX27_PAD_CSI_HSYNC__GPIO2_21                       0x35 0x032
-#define MX27_PAD_USBH1_SUSP__USBH1_SUSP                    0x36 0x004
-#define MX27_PAD_USBH1_SUSP__GPIO2_22                      0x36 0x032
-#define MX27_PAD_USB_PWR__USB_PWR                          0x37 0x004
-#define MX27_PAD_USB_PWR__GPIO2_23                         0x37 0x032
-#define MX27_PAD_USB_OC_B__USB_OC_B                        0x38 0x000
-#define MX27_PAD_USB_OC_B__GPIO2_24                        0x38 0x032
-#define MX27_PAD_USBH1_RCV__USBH1_RCV                      0x39 0x004
-#define MX27_PAD_USBH1_RCV__GPIO2_25                       0x39 0x032
-#define MX27_PAD_USBH1_FS__USBH1_FS                        0x3a 0x004
-#define MX27_PAD_USBH1_FS__UART4_RTS                       0x3a 0x001
-#define MX27_PAD_USBH1_FS__GPIO2_26                        0x3a 0x032
-#define MX27_PAD_USBH1_OE_B__USBH1_OE_B                    0x3b 0x004
-#define MX27_PAD_USBH1_OE_B__GPIO2_27                      0x3b 0x032
-#define MX27_PAD_USBH1_TXDM__USBH1_TXDM                    0x3c 0x004
-#define MX27_PAD_USBH1_TXDM__UART4_TXD                     0x3c 0x005
-#define MX27_PAD_USBH1_TXDM__GPIO2_28                      0x3c 0x032
-#define MX27_PAD_USBH1_TXDP__USBH1_TXDP                    0x3d 0x004
-#define MX27_PAD_USBH1_TXDP__UART4_CTS                     0x3d 0x005
-#define MX27_PAD_USBH1_TXDP__GPIO2_29                      0x3d 0x032
-#define MX27_PAD_USBH1_RXDM__USBH1_RXDM                    0x3e 0x004
-#define MX27_PAD_USBH1_RXDM__GPIO2_30                      0x3e 0x032
-#define MX27_PAD_USBH1_RXDP__USBH1_RXDP                    0x3f 0x004
-#define MX27_PAD_USBH1_RXDP__UART4_RXD                     0x3f 0x001
-#define MX27_PAD_USBH1_RXDP__GPIO2_31                      0x3f 0x032
-#define MX27_PAD_I2C2_SDA__I2C2_SDA                        0x45 0x004
-#define MX27_PAD_I2C2_SDA__GPIO3_5                         0x45 0x032
-#define MX27_PAD_I2C2_SCL__I2C2_SCL                        0x46 0x004
-#define MX27_PAD_I2C2_SCL__GPIO3_6                         0x46 0x032
-#define MX27_PAD_USBOTG_DATA5__USBOTG_DATA5                0x47 0x004
-#define MX27_PAD_USBOTG_DATA5__GPIO3_7                     0x47 0x032
-#define MX27_PAD_USBOTG_DATA6__USBOTG_DATA6                0x48 0x004
-#define MX27_PAD_USBOTG_DATA6__GPIO3_8                     0x48 0x032
-#define MX27_PAD_USBOTG_DATA0__USBOTG_DATA0                0x49 0x004
-#define MX27_PAD_USBOTG_DATA0__GPIO3_9                     0x49 0x032
-#define MX27_PAD_USBOTG_DATA2__USBOTG_DATA2                0x4a 0x004
-#define MX27_PAD_USBOTG_DATA2__GPIO3_10                    0x4a 0x032
-#define MX27_PAD_USBOTG_DATA1__USBOTG_DATA1                0x4b 0x004
-#define MX27_PAD_USBOTG_DATA1__GPIO3_11                    0x4b 0x032
-#define MX27_PAD_USBOTG_DATA4__USBOTG_DATA4                0x4c 0x004
-#define MX27_PAD_USBOTG_DATA4__GPIO3_12                    0x4c 0x032
-#define MX27_PAD_USBOTG_DATA3__USBOTG_DATA3                0x4d 0x004
-#define MX27_PAD_USBOTG_DATA3__GPIO3_13                    0x4d 0x032
-#define MX27_PAD_TOUT__TOUT                                0x4e 0x004
-#define MX27_PAD_TOUT__GPIO3_14                            0x4e 0x032
-#define MX27_PAD_TIN__TIN                                  0x4f 0x000
-#define MX27_PAD_TIN__GPIO3_15                             0x4f 0x032
-#define MX27_PAD_SSI4_FS__SSI4_FS                          0x50 0x004
-#define MX27_PAD_SSI4_FS__GPIO3_16                         0x50 0x032
-#define MX27_PAD_SSI4_RXDAT__SSI4_RXDAT                    0x51 0x004
-#define MX27_PAD_SSI4_RXDAT__GPIO3_17                      0x51 0x032
-#define MX27_PAD_SSI4_TXDAT__SSI4_TXDAT                    0x52 0x004
-#define MX27_PAD_SSI4_TXDAT__GPIO3_18                      0x52 0x032
-#define MX27_PAD_SSI4_CLK__SSI4_CLK                        0x53 0x004
-#define MX27_PAD_SSI4_CLK__GPIO3_19                        0x53 0x032
-#define MX27_PAD_SSI1_FS__SSI1_FS                          0x54 0x004
-#define MX27_PAD_SSI1_FS__GPIO3_20                         0x54 0x032
-#define MX27_PAD_SSI1_RXDAT__SSI1_RXDAT                    0x55 0x004
-#define MX27_PAD_SSI1_RXDAT__GPIO3_21                      0x55 0x032
-#define MX27_PAD_SSI1_TXDAT__SSI1_TXDAT                    0x56 0x004
-#define MX27_PAD_SSI1_TXDAT__GPIO3_22                      0x56 0x032
-#define MX27_PAD_SSI1_CLK__SSI1_CLK                        0x57 0x004
-#define MX27_PAD_SSI1_CLK__GPIO3_23                        0x57 0x032
-#define MX27_PAD_SSI2_FS__SSI2_FS                          0x58 0x004
-#define MX27_PAD_SSI2_FS__GPT5_TOUT                        0x58 0x005
-#define MX27_PAD_SSI2_FS__GPIO3_24                         0x58 0x032
-#define MX27_PAD_SSI2_RXDAT__SSI2_RXDAT                    0x59 0x004
-#define MX27_PAD_SSI2_RXDAT__GPTS_TIN                      0x59 0x001
-#define MX27_PAD_SSI2_RXDAT__GPIO3_25                      0x59 0x032
-#define MX27_PAD_SSI2_TXDAT__SSI2_TXDAT                    0x5a 0x004
-#define MX27_PAD_SSI2_TXDAT__GPT4_TOUT                     0x5a 0x005
-#define MX27_PAD_SSI2_TXDAT__GPIO3_26                      0x5a 0x032
-#define MX27_PAD_SSI2_CLK__SSI2_CLK                        0x5b 0x004
-#define MX27_PAD_SSI2_CLK__GPT4_TIN                        0x5b 0x001
-#define MX27_PAD_SSI2_CLK__GPIO3_27                        0x5b 0x032
-#define MX27_PAD_SSI3_FS__SSI3_FS                          0x5c 0x004
-#define MX27_PAD_SSI3_FS__SLCDC2_D0                        0x5c 0x001
-#define MX27_PAD_SSI3_FS__GPIO3_28                         0x5c 0x032
-#define MX27_PAD_SSI3_RXDAT__SSI3_RXDAT                    0x5d 0x004
-#define MX27_PAD_SSI3_RXDAT__SLCDC2_RS                     0x5d 0x001
-#define MX27_PAD_SSI3_RXDAT__GPIO3_29                      0x5d 0x032
-#define MX27_PAD_SSI3_TXDAT__SSI3_TXDAT                    0x5e 0x004
-#define MX27_PAD_SSI3_TXDAT__SLCDC2_CS                     0x5e 0x001
-#define MX27_PAD_SSI3_TXDAT__GPIO3_30                      0x5e 0x032
-#define MX27_PAD_SSI3_CLK__SSI3_CLK                        0x5f 0x004
-#define MX27_PAD_SSI3_CLK__SLCDC2_CLK                      0x5f 0x001
-#define MX27_PAD_SSI3_CLK__GPIO3_31                        0x5f 0x032
-#define MX27_PAD_SD3_CMD__SD3_CMD                          0x60 0x004
-#define MX27_PAD_SD3_CMD__FEC_TXD0                         0x60 0x006
-#define MX27_PAD_SD3_CMD__GPIO4_0                          0x60 0x032
-#define MX27_PAD_SD3_CLK__SD3_CLK                          0x61 0x004
-#define MX27_PAD_SD3_CLK__ETMTRACEPKT15                    0x61 0x005
-#define MX27_PAD_SD3_CLK__FEC_TXD1                         0x61 0x006
-#define MX27_PAD_SD3_CLK__GPIO4_1                          0x61 0x032
-#define MX27_PAD_ATA_DATA0__ATA_DATA0                      0x62 0x004
-#define MX27_PAD_ATA_DATA0__SD3_D0                         0x62 0x005
-#define MX27_PAD_ATA_DATA0__FEC_TXD2                       0x62 0x006
-#define MX27_PAD_ATA_DATA0__GPIO4_2                        0x62 0x032
-#define MX27_PAD_ATA_DATA1__ATA_DATA1                      0x63 0x004
-#define MX27_PAD_ATA_DATA1__SD3_D1                         0x63 0x005
-#define MX27_PAD_ATA_DATA1__FEC_TXD3                       0x63 0x006
-#define MX27_PAD_ATA_DATA1__GPIO4_3                        0x63 0x032
-#define MX27_PAD_ATA_DATA2__ATA_DATA2                      0x64 0x004
-#define MX27_PAD_ATA_DATA2__SD3_D2                         0x64 0x005
-#define MX27_PAD_ATA_DATA2__FEC_RX_ER                      0x64 0x002
-#define MX27_PAD_ATA_DATA2__GPIO4_4                        0x64 0x032
-#define MX27_PAD_ATA_DATA3__ATA_DATA3                      0x65 0x004
-#define MX27_PAD_ATA_DATA3__SD3_D3                         0x65 0x005
-#define MX27_PAD_ATA_DATA3__FEC_RXD1                       0x65 0x002
-#define MX27_PAD_ATA_DATA3__GPIO4_5                        0x65 0x032
-#define MX27_PAD_ATA_DATA4__ATA_DATA4                      0x66 0x004
-#define MX27_PAD_ATA_DATA4__ETMTRACEPKT14                  0x66 0x005
-#define MX27_PAD_ATA_DATA4__FEC_RXD2                       0x66 0x002
-#define MX27_PAD_ATA_DATA4__GPIO4_6                        0x66 0x032
-#define MX27_PAD_ATA_DATA5__ATA_DATA5                      0x67 0x004
-#define MX27_PAD_ATA_DATA5__ETMTRACEPKT13                  0x67 0x005
-#define MX27_PAD_ATA_DATA5__FEC_RXD3                       0x67 0x002
-#define MX27_PAD_ATA_DATA5__GPIO4_7                        0x67 0x032
-#define MX27_PAD_ATA_DATA6__ATA_DATA6                      0x68 0x004
-#define MX27_PAD_ATA_DATA6__FEC_MDIO                       0x68 0x005
-#define MX27_PAD_ATA_DATA6__GPIO4_8                        0x68 0x032
-#define MX27_PAD_ATA_DATA7__ATA_DATA7                      0x69 0x004
-#define MX27_PAD_ATA_DATA7__ETMTRACEPKT12                  0x69 0x005
-#define MX27_PAD_ATA_DATA7__FEC_MDC                        0x69 0x006
-#define MX27_PAD_ATA_DATA7__GPIO4_9                        0x69 0x032
-#define MX27_PAD_ATA_DATA8__ATA_DATA8                      0x6a 0x004
-#define MX27_PAD_ATA_DATA8__ETMTRACEPKT11                  0x6a 0x005
-#define MX27_PAD_ATA_DATA8__FEC_CRS                        0x6a 0x002
-#define MX27_PAD_ATA_DATA8__GPIO4_10                       0x6a 0x032
-#define MX27_PAD_ATA_DATA9__ATA_DATA9                      0x6b 0x004
-#define MX27_PAD_ATA_DATA9__ETMTRACEPKT10                  0x6b 0x005
-#define MX27_PAD_ATA_DATA9__FEC_TX_CLK                     0x6b 0x002
-#define MX27_PAD_ATA_DATA9__GPIO4_11                       0x6b 0x032
-#define MX27_PAD_ATA_DATA10__ATA_DATA10                    0x6c 0x004
-#define MX27_PAD_ATA_DATA10__ETMTRACEPKT9                  0x6c 0x005
-#define MX27_PAD_ATA_DATA10__FEC_RXD0                      0x6c 0x002
-#define MX27_PAD_ATA_DATA10__GPIO4_12                      0x6c 0x032
-#define MX27_PAD_ATA_DATA11__ATA_DATA11                    0x6d 0x004
-#define MX27_PAD_ATA_DATA11__ETMTRACEPKT8                  0x6d 0x005
-#define MX27_PAD_ATA_DATA11__FEC_RX_DV                     0x6d 0x002
-#define MX27_PAD_ATA_DATA11__GPIO4_13                      0x6d 0x032
-#define MX27_PAD_ATA_DATA12__ATA_DATA12                    0x6e 0x004
-#define MX27_PAD_ATA_DATA12__ETMTRACEPKT7                  0x6e 0x005
-#define MX27_PAD_ATA_DATA12__FEC_RX_CLK                    0x6e 0x002
-#define MX27_PAD_ATA_DATA12__GPIO4_14                      0x6e 0x032
-#define MX27_PAD_ATA_DATA13__ATA_DATA13                    0x6f 0x004
-#define MX27_PAD_ATA_DATA13__ETMTRACEPKT6                  0x6f 0x005
-#define MX27_PAD_ATA_DATA13__FEC_COL                       0x6f 0x002
-#define MX27_PAD_ATA_DATA13__GPIO4_15                      0x6f 0x032
-#define MX27_PAD_ATA_DATA14__ATA_DATA14                    0x70 0x004
-#define MX27_PAD_ATA_DATA14__ETMTRACEPKT5                  0x70 0x005
-#define MX27_PAD_ATA_DATA14__FEC_TX_ER                     0x70 0x006
-#define MX27_PAD_ATA_DATA14__GPIO4_16                      0x70 0x032
-#define MX27_PAD_I2C_DATA__I2C_DATA                        0x71 0x004
-#define MX27_PAD_I2C_DATA__GPIO4_17                        0x71 0x032
-#define MX27_PAD_I2C_CLK__I2C_CLK                          0x72 0x004
-#define MX27_PAD_I2C_CLK__GPIO4_18                         0x72 0x032
-#define MX27_PAD_CSPI2_SS2__CSPI2_SS2                      0x73 0x004
-#define MX27_PAD_CSPI2_SS2__USBH2_DATA4                    0x73 0x005
-#define MX27_PAD_CSPI2_SS2__GPIO4_19                       0x73 0x032
-#define MX27_PAD_CSPI2_SS1__CSPI2_SS1                      0x74 0x004
-#define MX27_PAD_CSPI2_SS1__USBH2_DATA3                    0x74 0x005
-#define MX27_PAD_CSPI2_SS1__GPIO4_20                       0x74 0x032
-#define MX27_PAD_CSPI2_SS0__CSPI2_SS0                      0x75 0x004
-#define MX27_PAD_CSPI2_SS0__USBH2_DATA6                    0x75 0x005
-#define MX27_PAD_CSPI2_SS0__GPIO4_21                       0x75 0x032
-#define MX27_PAD_CSPI2_SCLK__CSPI2_SCLK                    0x76 0x004
-#define MX27_PAD_CSPI2_SCLK__USBH2_DATA0                   0x76 0x005
-#define MX27_PAD_CSPI2_SCLK__GPIO4_22                      0x76 0x032
-#define MX27_PAD_CSPI2_MISO__CSPI2_MISO                    0x77 0x004
-#define MX27_PAD_CSPI2_MISO__USBH2_DATA2                   0x77 0x005
-#define MX27_PAD_CSPI2_MISO__GPIO4_23                      0x77 0x032
-#define MX27_PAD_CSPI2_MOSI__CSPI2_MOSI                    0x78 0x004
-#define MX27_PAD_CSPI2_MOSI__USBH2_DATA1                   0x78 0x005
-#define MX27_PAD_CSPI2_MOSI__GPIO4_24                      0x78 0x032
-#define MX27_PAD_CSPI1_RDY__CSPI1_RDY                      0x79 0x000
-#define MX27_PAD_CSPI1_RDY__GPIO4_25                       0x79 0x032
-#define MX27_PAD_CSPI1_SS2__CSPI1_SS2                      0x7a 0x004
-#define MX27_PAD_CSPI1_SS2__USBH2_DATA5                    0x7a 0x005
-#define MX27_PAD_CSPI1_SS2__GPIO4_26                       0x7a 0x032
-#define MX27_PAD_CSPI1_SS1__CSPI1_SS1                      0x7b 0x004
-#define MX27_PAD_CSPI1_SS1__GPIO4_27                       0x7b 0x032
-#define MX27_PAD_CSPI1_SS0__CSPI1_SS0                      0x7c 0x004
-#define MX27_PAD_CSPI1_SS0__GPIO4_28                       0x7c 0x032
-#define MX27_PAD_CSPI1_SCLK__CSPI1_SCLK                    0x7d 0x004
-#define MX27_PAD_CSPI1_SCLK__GPIO4_29                      0x7d 0x032
-#define MX27_PAD_CSPI1_MISO__CSPI1_MISO                    0x7e 0x004
-#define MX27_PAD_CSPI1_MISO__GPIO4_30                      0x7e 0x032
-#define MX27_PAD_CSPI1_MOSI__CSPI1_MOSI                    0x7f 0x004
-#define MX27_PAD_CSPI1_MOSI__GPIO4_31                      0x7f 0x032
-#define MX27_PAD_USBOTG_NXT__USBOTG_NXT                    0x80 0x000
-#define MX27_PAD_USBOTG_NXT__KP_COL6A                      0x80 0x005
-#define MX27_PAD_USBOTG_NXT__GPIO5_0                       0x80 0x032
-#define MX27_PAD_USBOTG_STP__USBOTG_STP                    0x81 0x004
-#define MX27_PAD_USBOTG_STP__KP_ROW6A                      0x81 0x005
-#define MX27_PAD_USBOTG_STP__GPIO5_1                       0x81 0x032
-#define MX27_PAD_USBOTG_DIR__USBOTG_DIR                    0x82 0x000
-#define MX27_PAD_USBOTG_DIR__KP_ROW7A                      0x82 0x005
-#define MX27_PAD_USBOTG_DIR__GPIO5_2                       0x82 0x032
-#define MX27_PAD_UART2_CTS__UART2_CTS                      0x83 0x004
-#define MX27_PAD_UART2_CTS__KP_COL7                        0x83 0x005
-#define MX27_PAD_UART2_CTS__GPIO5_3                        0x83 0x032
-#define MX27_PAD_UART2_RTS__UART2_RTS                      0x84 0x000
-#define MX27_PAD_UART2_RTS__KP_ROW7                        0x84 0x005
-#define MX27_PAD_UART2_RTS__GPIO5_4                        0x84 0x032
-#define MX27_PAD_PWMO__PWMO                                0x85 0x004
-#define MX27_PAD_PWMO__GPIO5_5                             0x85 0x032
-#define MX27_PAD_UART2_TXD__UART2_TXD                      0x86 0x004
-#define MX27_PAD_UART2_TXD__KP_COL6                        0x86 0x005
-#define MX27_PAD_UART2_TXD__GPIO5_6                        0x86 0x032
-#define MX27_PAD_UART2_RXD__UART2_RXD                      0x87 0x000
-#define MX27_PAD_UART2_RXD__KP_ROW6                        0x87 0x005
-#define MX27_PAD_UART2_RXD__GPIO5_7                        0x87 0x032
-#define MX27_PAD_UART3_TXD__UART3_TXD                      0x88 0x004
-#define MX27_PAD_UART3_TXD__GPIO5_8                        0x88 0x032
-#define MX27_PAD_UART3_RXD__UART3_RXD                      0x89 0x000
-#define MX27_PAD_UART3_RXD__GPIO5_9                        0x89 0x032
-#define MX27_PAD_UART3_CTS__UART3_CTS                      0x8a 0x004
-#define MX27_PAD_UART3_CTS__GPIO5_10                       0x8a 0x032
-#define MX27_PAD_UART3_RTS__UART3_RTS                      0x8b 0x000
-#define MX27_PAD_UART3_RTS__GPIO5_11                       0x8b 0x032
-#define MX27_PAD_UART1_TXD__UART1_TXD                      0x8c 0x004
-#define MX27_PAD_UART1_TXD__GPIO5_12                       0x8c 0x032
-#define MX27_PAD_UART1_RXD__UART1_RXD                      0x8d 0x000
-#define MX27_PAD_UART1_RXD__GPIO5_13                       0x8d 0x032
-#define MX27_PAD_UART1_CTS__UART1_CTS                      0x8e 0x004
-#define MX27_PAD_UART1_CTS__GPIO5_14                       0x8e 0x032
-#define MX27_PAD_UART1_RTS__UART1_RTS                      0x8f 0x000
-#define MX27_PAD_UART1_RTS__GPIO5_15                       0x8f 0x032
-#define MX27_PAD_RTCK__RTCK                                0x90 0x004
-#define MX27_PAD_RTCK__OWIRE                               0x90 0x005
-#define MX27_PAD_RTCK__GPIO5_16                            0x90 0x032
-#define MX27_PAD_RESET_OUT_B__RESET_OUT_B                  0x91 0x004
-#define MX27_PAD_RESET_OUT_B__GPIO5_17                     0x91 0x032
-#define MX27_PAD_SD1_D0__SD1_D0                            0x92 0x004
-#define MX27_PAD_SD1_D0__CSPI3_MISO                        0x92 0x001
-#define MX27_PAD_SD1_D0__GPIO5_18                          0x92 0x032
-#define MX27_PAD_SD1_D1__SD1_D1                            0x93 0x004
-#define MX27_PAD_SD1_D1__GPIO5_19                          0x93 0x032
-#define MX27_PAD_SD1_D2__SD1_D2                            0x94 0x004
-#define MX27_PAD_SD1_D2__GPIO5_20                          0x94 0x032
-#define MX27_PAD_SD1_D3__SD1_D3                            0x95 0x004
-#define MX27_PAD_SD1_D3__CSPI3_SS                          0x95 0x005
-#define MX27_PAD_SD1_D3__GPIO5_21                          0x95 0x032
-#define MX27_PAD_SD1_CMD__SD1_CMD                          0x96 0x004
-#define MX27_PAD_SD1_CMD__CSPI3_MOSI                       0x96 0x005
-#define MX27_PAD_SD1_CMD__GPIO5_22                         0x96 0x032
-#define MX27_PAD_SD1_CLK__SD1_CLK                          0x97 0x004
-#define MX27_PAD_SD1_CLK__CSPI3_SCLK                       0x97 0x005
-#define MX27_PAD_SD1_CLK__GPIO5_23                         0x97 0x032
-#define MX27_PAD_USBOTG_CLK__USBOTG_CLK                    0x98 0x000
-#define MX27_PAD_USBOTG_CLK__GPIO5_24                      0x98 0x032
-#define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7                0x99 0x004
-#define MX27_PAD_USBOTG_DATA7__GPIO5_25                    0x99 0x032
-#define MX27_PAD_NFRB__NFRB                                0xa0 0x000
-#define MX27_PAD_NFRB__ETMTRACEPKT3                        0xa0 0x005
-#define MX27_PAD_NFRB__GPIO6_0                             0xa0 0x032
-#define MX27_PAD_NFCLE__NFCLE                              0xa1 0x004
-#define MX27_PAD_NFCLE__ETMTRACEPKT0                       0xa1 0x005
-#define MX27_PAD_NFCLE__GPIO6_1                            0xa1 0x032
-#define MX27_PAD_NFWP_B__NFWP_B                            0xa2 0x004
-#define MX27_PAD_NFWP_B__ETMTRACEPKT1                      0xa2 0x005
-#define MX27_PAD_NFWP_B__GPIO6_2                           0xa2 0x032
-#define MX27_PAD_NFCE_B__NFCE_B                            0xa3 0x004
-#define MX27_PAD_NFCE_B__ETMTRACEPKT2                      0xa3 0x005
-#define MX27_PAD_NFCE_B__GPIO6_3                           0xa3 0x032
-#define MX27_PAD_NFALE__NFALE                              0xa4 0x004
-#define MX27_PAD_NFALE__ETMPIPESTAT0                       0xa4 0x005
-#define MX27_PAD_NFALE__GPIO6_4                            0xa4 0x032
-#define MX27_PAD_NFRE_B__NFRE_B                            0xa5 0x004
-#define MX27_PAD_NFRE_B__ETMPIPESTAT1                      0xa5 0x005
-#define MX27_PAD_NFRE_B__GPIO6_5                           0xa5 0x032
-#define MX27_PAD_NFWE_B__NFWE_B                            0xa6 0x004
-#define MX27_PAD_NFWE_B__ETMPIPESTAT2                      0xa6 0x005
-#define MX27_PAD_NFWE_B__GPIO6_6                           0xa6 0x032
-#define MX27_PAD_PC_POE__PC_POE                            0xa7 0x004
-#define MX27_PAD_PC_POE__ATA_BUFFER_EN                     0xa7 0x005
-#define MX27_PAD_PC_POE__GPIO6_7                           0xa7 0x032
-#define MX27_PAD_PC_RW_B__PC_RW_B                          0xa8 0x004
-#define MX27_PAD_PC_RW_B__ATA_IORDY                        0xa8 0x001
-#define MX27_PAD_PC_RW_B__GPIO6_8                          0xa8 0x032
-#define MX27_PAD_IOIS16__IOIS16                            0xa9 0x000
-#define MX27_PAD_IOIS16__ATA_INTRQ                         0xa9 0x001
-#define MX27_PAD_IOIS16__GPIO6_9                           0xa9 0x032
-#define MX27_PAD_PC_RST__PC_RST                            0xaa 0x004
-#define MX27_PAD_PC_RST__ATA_RESET_B                       0xaa 0x005
-#define MX27_PAD_PC_RST__GPIO6_10                          0xaa 0x032
-#define MX27_PAD_PC_BVD2__PC_BVD2                          0xab 0x000
-#define MX27_PAD_PC_BVD2__ATA_DMACK                        0xab 0x005
-#define MX27_PAD_PC_BVD2__GPIO6_11                         0xab 0x032
-#define MX27_PAD_PC_BVD1__PC_BVD1                          0xac 0x000
-#define MX27_PAD_PC_BVD1__ATA_DMARQ                        0xac 0x001
-#define MX27_PAD_PC_BVD1__GPIO6_12                         0xac 0x032
-#define MX27_PAD_PC_VS2__PC_VS2                            0xad 0x000
-#define MX27_PAD_PC_VS2__ATA_DA0                           0xad 0x005
-#define MX27_PAD_PC_VS2__GPIO6_13                          0xad 0x032
-#define MX27_PAD_PC_VS1__PC_VS1                            0xae 0x000
-#define MX27_PAD_PC_VS1__ATA_DA1                           0xae 0x005
-#define MX27_PAD_PC_VS1__GPIO6_14                          0xae 0x032
-#define MX27_PAD_CLKO__CLKO                                0xaf 0x004
-#define MX27_PAD_CLKO__GPIO6_15                            0xaf 0x032
-#define MX27_PAD_PC_PWRON__PC_PWRON                        0xb0 0x000
-#define MX27_PAD_PC_PWRON__ATA_DA2                         0xb0 0x005
-#define MX27_PAD_PC_PWRON__GPIO6_16                        0xb0 0x032
-#define MX27_PAD_PC_READY__PC_READY                        0xb1 0x000
-#define MX27_PAD_PC_READY__ATA_CS0                         0xb1 0x005
-#define MX27_PAD_PC_READY__GPIO6_17                        0xb1 0x032
-#define MX27_PAD_PC_WAIT_B__PC_WAIT_B                      0xb2 0x000
-#define MX27_PAD_PC_WAIT_B__ATA_CS1                        0xb2 0x005
-#define MX27_PAD_PC_WAIT_B__GPIO6_18                       0xb2 0x032
-#define MX27_PAD_PC_CD2_B__PC_CD2_B                        0xb3 0x000
-#define MX27_PAD_PC_CD2_B__ATA_DIOW                        0xb3 0x005
-#define MX27_PAD_PC_CD2_B__GPIO6_19                        0xb3 0x032
-#define MX27_PAD_PC_CD1_B__PC_CD1_B                        0xb4 0x000
-#define MX27_PAD_PC_CD1_B__ATA_DIOR                        0xb4 0x005
-#define MX27_PAD_PC_CD1_B__GPIO6_20                        0xb4 0x032
-#define MX27_PAD_CS4_B__CS4_B                              0xb5 0x004
-#define MX27_PAD_CS4_B__ETMTRACESYNC                       0xb5 0x005
-#define MX27_PAD_CS4_B__GPIO6_21                           0xb5 0x032
-#define MX27_PAD_CS5_B__CS5_B                              0xb6 0x004
-#define MX27_PAD_CS5_B__ETMTRACECLK                        0xb6 0x005
-#define MX27_PAD_CS5_B__GPIO6_22                           0xb6 0x032
-#define MX27_PAD_ATA_DATA15__ATA_DATA15                    0xb7 0x004
-#define MX27_PAD_ATA_DATA15__ETMTRACEPKT4                  0xb7 0x005
-#define MX27_PAD_ATA_DATA15__FEC_TX_EN                     0xb7 0x006
-#define MX27_PAD_ATA_DATA15__GPIO6_23                      0xb7 0x032
-
-#endif /* __DTS_IMX27_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
deleted file mode 100644
index e140307be2e7d..0000000000000
--- a/arch/arm/boot/dts/imx27.dtsi
+++ /dev/null
@@ -1,593 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Sascha Hauer, Pengutronix
-
-#include "imx27-pinfunc.h"
-
-#include <dt-bindings/clock/imx27-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		spi0 = &cspi1;
-		spi1 = &cspi2;
-		spi2 = &cspi3;
-	};
-
-	aitc: aitc-interrupt-controller@10040000 {
-		compatible = "fsl,imx27-aitc", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x10040000 0x1000>;
-	};
-
-	clocks {
-		clk_osc26m: osc26m {
-			compatible = "fsl,imx-osc26m", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-		};
-	};
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		cpu: cpu@0 {
-			device_type = "cpu";
-			reg = <0>;
-			compatible = "arm,arm926ej-s";
-			operating-points = <
-				/* kHz uV */
-				266000 1300000
-				399000 1450000
-			>;
-			clock-latency = <62500>;
-			clocks = <&clks IMX27_CLK_CPU_DIV>;
-			voltage-tolerance = <5>;
-		};
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&aitc>;
-		ranges;
-
-		aipi1: aipi@10000000 { /* AIPI1 */
-			compatible = "fsl,aipi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10000000 0x20000>;
-			ranges;
-
-			dma: dma@10001000 {
-				compatible = "fsl,imx27-dma";
-				reg = <0x10001000 0x1000>;
-				interrupts = <32>;
-				clocks = <&clks IMX27_CLK_DMA_IPG_GATE>,
-					 <&clks IMX27_CLK_DMA_AHB_GATE>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <1>;
-				dma-channels = <16>;
-			};
-
-			wdog: watchdog@10002000 {
-				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
-				reg = <0x10002000 0x1000>;
-				interrupts = <27>;
-				clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>;
-			};
-
-			gpt1: timer@10003000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
-				reg = <0x10003000 0x1000>;
-				interrupts = <26>;
-				clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt2: timer@10004000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
-				reg = <0x10004000 0x1000>;
-				interrupts = <25>;
-				clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt3: timer@10005000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
-				reg = <0x10005000 0x1000>;
-				interrupts = <24>;
-				clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm: pwm@10006000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx27-pwm";
-				reg = <0x10006000 0x1000>;
-				interrupts = <23>;
-				clocks = <&clks IMX27_CLK_PWM_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			rtc: rtc@10007000 {
-				compatible = "fsl,imx21-rtc";
-				reg = <0x10007000 0x1000>;
-				interrupts = <22>;
-				clocks = <&clks IMX27_CLK_CKIL>,
-					 <&clks IMX27_CLK_RTC_IPG_GATE>;
-				clock-names = "ref", "ipg";
-			};
-
-			kpp: kpp@10008000 {
-				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
-				reg = <0x10008000 0x1000>;
-				interrupts = <21>;
-				clocks = <&clks IMX27_CLK_KPP_IPG_GATE>;
-				status = "disabled";
-			};
-
-			owire: owire@10009000 {
-				compatible = "fsl,imx27-owire", "fsl,imx21-owire";
-				reg = <0x10009000 0x1000>;
-				clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>;
-				status = "disabled";
-			};
-
-			uart1: serial@1000a000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000a000 0x1000>;
-				interrupts = <20>;
-				clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@1000b000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000b000 0x1000>;
-				interrupts = <19>;
-				clocks = <&clks IMX27_CLK_UART2_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@1000c000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000c000 0x1000>;
-				interrupts = <18>;
-				clocks = <&clks IMX27_CLK_UART3_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@1000d000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000d000 0x1000>;
-				interrupts = <17>;
-				clocks = <&clks IMX27_CLK_UART4_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			cspi1: spi@1000e000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x1000e000 0x1000>;
-				interrupts = <16>;
-				clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			cspi2: spi@1000f000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x1000f000 0x1000>;
-				interrupts = <15>;
-				clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			ssi1: ssi@10010000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
-				reg = <0x10010000 0x1000>;
-				interrupts = <14>;
-				clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>;
-				dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
-				dma-names = "rx0", "tx0", "rx1", "tx1";
-				fsl,fifo-depth = <8>;
-				status = "disabled";
-			};
-
-			ssi2: ssi@10011000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
-				reg = <0x10011000 0x1000>;
-				interrupts = <13>;
-				clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>;
-				dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
-				dma-names = "rx0", "tx0", "rx1", "tx1";
-				fsl,fifo-depth = <8>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@10012000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
-				reg = <0x10012000 0x1000>;
-				interrupts = <12>;
-				clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>;
-				status = "disabled";
-			};
-
-			sdhci1: mmc@10013000 {
-				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
-				reg = <0x10013000 0x1000>;
-				interrupts = <11>;
-				clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&dma 7>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			sdhci2: mmc@10014000 {
-				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
-				reg = <0x10014000 0x1000>;
-				interrupts = <10>;
-				clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&dma 6>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@10015000 {
-				compatible = "fsl,imx27-iomuxc";
-				reg = <0x10015000 0x600>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges;
-
-				gpio1: gpio@10015000 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015000 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio2: gpio@10015100 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015100 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio3: gpio@10015200 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015200 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio4: gpio@10015300 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015300 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio5: gpio@10015400 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015400 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio6: gpio@10015500 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015500 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-			};
-
-			audmux: audmux@10016000 {
-				compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
-				reg = <0x10016000 0x1000>;
-				clocks = <&clks IMX27_CLK_DUMMY>;
-				clock-names = "audmux";
-				status = "disabled";
-			};
-
-			cspi3: spi@10017000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x10017000 0x1000>;
-				interrupts = <6>;
-				clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt4: timer@10019000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
-				reg = <0x10019000 0x1000>;
-				interrupts = <4>;
-				clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt5: timer@1001a000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
-				reg = <0x1001a000 0x1000>;
-				interrupts = <3>;
-				clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			uart5: serial@1001b000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1001b000 0x1000>;
-				interrupts = <49>;
-				clocks = <&clks IMX27_CLK_UART5_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart6: serial@1001c000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1001c000 0x1000>;
-				interrupts = <48>;
-				clocks = <&clks IMX27_CLK_UART6_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c2: i2c@1001d000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
-				reg = <0x1001d000 0x1000>;
-				interrupts = <1>;
-				clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>;
-				status = "disabled";
-			};
-
-			sdhci3: mmc@1001e000 {
-				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
-				reg = <0x1001e000 0x1000>;
-				interrupts = <9>;
-				clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&dma 36>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			gpt6: timer@1001f000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
-				reg = <0x1001f000 0x1000>;
-				interrupts = <2>;
-				clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-		};
-
-		aipi2: aipi@10020000 { /* AIPI2 */
-			compatible = "fsl,aipi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10020000 0x20000>;
-			ranges;
-
-			fb: fb@10021000 {
-				compatible = "fsl,imx27-fb", "fsl,imx21-fb";
-				interrupts = <61>;
-				reg = <0x10021000 0x1000>;
-				clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>,
-					 <&clks IMX27_CLK_LCDC_AHB_GATE>,
-					 <&clks IMX27_CLK_PER3_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			coda: coda@10023000 {
-				compatible = "fsl,imx27-vpu", "cnm,codadx6";
-				reg = <0x10023000 0x0200>;
-				interrupts = <53>;
-				clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>,
-					 <&clks IMX27_CLK_VPU_AHB_GATE>;
-				clock-names = "per", "ahb";
-				iram = <&iram>;
-			};
-
-			usbotg: usb@10024000 {
-				compatible = "fsl,imx27-usb";
-				reg = <0x10024000 0x200>;
-				interrupts = <56>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
-					<&clks IMX27_CLK_USB_AHB_GATE>,
-					<&clks IMX27_CLK_USB_DIV>;
-				clock-names = "ipg", "ahb", "per";
-				fsl,usbmisc = <&usbmisc 0>;
-				status = "disabled";
-			};
-
-			usbh1: usb@10024200 {
-				compatible = "fsl,imx27-usb";
-				reg = <0x10024200 0x200>;
-				interrupts = <54>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
-					<&clks IMX27_CLK_USB_AHB_GATE>,
-					<&clks IMX27_CLK_USB_DIV>;
-				clock-names = "ipg", "ahb", "per";
-				fsl,usbmisc = <&usbmisc 1>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			usbh2: usb@10024400 {
-				compatible = "fsl,imx27-usb";
-				reg = <0x10024400 0x200>;
-				interrupts = <55>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
-					<&clks IMX27_CLK_USB_AHB_GATE>,
-					<&clks IMX27_CLK_USB_DIV>;
-				clock-names = "ipg", "ahb", "per";
-				fsl,usbmisc = <&usbmisc 2>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@10024600 {
-				#index-cells = <1>;
-				compatible = "fsl,imx27-usbmisc";
-				reg = <0x10024600 0x200>;
-			};
-
-			sahara2: crypto@10025000 {
-				compatible = "fsl,imx27-sahara";
-				reg = <0x10025000 0x1000>;
-				interrupts = <59>;
-				clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>,
-					 <&clks IMX27_CLK_SAHARA_AHB_GATE>;
-				clock-names = "ipg", "ahb";
-			};
-
-			clks: ccm@10027000{
-				compatible = "fsl,imx27-ccm";
-				reg = <0x10027000 0x1000>;
-				#clock-cells = <1>;
-			};
-
-			iim: efuse@10028000 {
-				compatible = "fsl,imx27-iim";
-				reg = <0x10028000 0x1000>;
-				interrupts = <62>;
-				clocks = <&clks IMX27_CLK_IIM_IPG_GATE>;
-			};
-
-			fec: ethernet@1002b000 {
-				compatible = "fsl,imx27-fec";
-				reg = <0x1002b000 0x1000>;
-				interrupts = <50>;
-				clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
-					 <&clks IMX27_CLK_FEC_AHB_GATE>;
-				clock-names = "ipg", "ahb";
-				status = "disabled";
-			};
-		};
-
-		nfc: nand-controller@d8000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,imx27-nand";
-			reg = <0xd8000000 0x1000>;
-			interrupts = <29>;
-			clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>;
-			status = "disabled";
-		};
-
-		weim: weim@d8002000 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			compatible = "fsl,imx27-weim";
-			reg = <0xd8002000 0x1000>;
-			clocks = <&clks IMX27_CLK_EMI_AHB_GATE>;
-			ranges = <
-				0 0 0xc0000000 0x08000000
-				1 0 0xc8000000 0x08000000
-				2 0 0xd0000000 0x02000000
-				3 0 0xd2000000 0x02000000
-				4 0 0xd4000000 0x02000000
-				5 0 0xd6000000 0x02000000
-			>;
-			status = "disabled";
-		};
-
-		iram: sram@ffff4c00 {
-			compatible = "mmio-sram";
-			reg = <0xffff4c00 0xb400>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
deleted file mode 100644
index 98672932e41bd..0000000000000
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Armadeus Systems APF28 module";
-	compatible = "armadeus,imx28-apf28", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_pins_a>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0 0x300000>;
-	};
-
-	partition@300000 {
-		label = "env";
-		reg = <0x300000 0x80000>;
-	};
-
-	partition@380000 {
-		label = "env2";
-		reg = <0x380000 0x80000>;
-	};
-
-	partition@400000 {
-		label = "dtb";
-		reg = <0x400000 0x80000>;
-	};
-
-	partition@480000 {
-		label = "splash";
-		reg = <0x480000 0x80000>;
-	};
-
-	partition@500000 {
-		label = "kernel";
-		reg = <0x500000 0x800000>;
-	};
-
-	partition@d00000 {
-		label = "rootfs";
-		reg = <0xd00000 0xf300000>;
-	};
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>;
-	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
deleted file mode 100644
index 4704b6141836d..0000000000000
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ /dev/null
@@ -1,217 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- */
-
-/* APF28Dev is a docking board for the APF28 SOM */
-#include "imx28-apf28.dts"
-
-/ {
-	model = "Armadeus Systems APF28Dev docking/development board";
-	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 23 1>;
-			enable-active-high;
-		};
-
-		reg_can0_vcc: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "can0_vcc";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio0 21 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-
-		pwms = <&pwm 3 191000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-button {
-			label = "User button";
-			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-};
-
-&auart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart0_pins_a>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&can0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&can0_pins_a>;
-	xceiver-supply = <&reg_can0_vcc>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_16bit_pins_a
-		     &lcdif_pins_apf28dev>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <16>;
-		bus-width = <16>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&lradc {
-	fsl,lradc-touchscreen-wires = <4>;
-	status = "okay";
-};
-
-&mac1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac1_pins_a>;
-	phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_apf28dev>;
-
-	hog_pins_apf28dev: hog@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D16__GPIO_1_16
-			MX28_PAD_LCD_D17__GPIO_1_17
-			MX28_PAD_LCD_D18__GPIO_1_18
-			MX28_PAD_LCD_D19__GPIO_1_19
-			MX28_PAD_LCD_D20__GPIO_1_20
-			MX28_PAD_LCD_D21__GPIO_1_21
-			MX28_PAD_LCD_D22__GPIO_1_22
-			MX28_PAD_GPMI_CE1N__GPIO_0_17
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_apf28dev: lcdif-apf28dev@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RD_E__LCD_VSYNC
-			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-			MX28_PAD_LCD_RS__LCD_DOTCLK
-			MX28_PAD_LCD_CS__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	usb0_otg_apf28dev: otg-apf28dev@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D23__GPIO_1_23
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
-	status = "okay";
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_4bit_pins_a
-		     &mmc0_cd_cfg &mmc0_sck_cfg>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&ssp2 {
-	compatible = "fsl,imx28-spi";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>;
-	status = "okay";
-};
-
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_otg_apf28dev
-		     &usb0_id_pins_b>;
-	vbus-supply = <&reg_usb0_vbus>;
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
deleted file mode 100644
index f9bf40d965681..0000000000000
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Bluegiga APX4 Development Kit";
-	compatible = "bluegiga,apx4devkit", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x04000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "bluegiga,apx4devkit-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "apx4devkit-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 28 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&auart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart0_pins_a>;
-	status = "okay";
-};
-
-&auart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart1_2pins_a>;
-	status = "okay";
-};
-
-&auart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart2_2pins_a>;
-	status = "okay";
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_pins_a>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_24bit_pins_a
-		     &lcdif_pins_apx4>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hfront-porch = <40>;
-				vback-porch = <32>;
-				vfront-porch = <13>;
-				hsync-len = <48>;
-				vsync-len = <3>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&saif0>;
-	};
-
-	pcf8563: rtc@51 {
-		compatible = "phg,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_a>;
-
-	hog_pins_a: hog@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_CE1N__GPIO_0_17
-			MX28_PAD_GPMI_RDY1__GPIO_0_21
-			MX28_PAD_SSP2_MISO__GPIO_2_18
-			MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
-			MX28_PAD_PWM3__GPIO_3_28
-			MX28_PAD_LCD_RESET__GPIO_3_30
-			MX28_PAD_JTAG_RTCK__GPIO_4_20
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_apx4: lcdif-apx4@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RD_E__LCD_VSYNC
-			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-			MX28_PAD_LCD_RS__LCD_DOTCLK
-			MX28_PAD_LCD_CS__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP0_DATA4__SSP2_D0
-			MX28_PAD_SSP0_DATA5__SSP2_D3
-			MX28_PAD_SSP0_DATA6__SSP2_CMD
-			MX28_PAD_SSP0_DATA7__SSP2_SCK
-			MX28_PAD_SSP2_SS1__SSP2_D1
-			MX28_PAD_SSP2_SS2__SSP2_D2
-		>;
-		fsl,drive-strength = <MXS_DRIVE_8mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-
-	mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP0_DATA7__SSP2_SCK
-		>;
-		fsl,drive-strength = <MXS_DRIVE_12mA>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&saif0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif0_pins_a>;
-	status = "okay";
-};
-
-&saif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif1_pins_a>;
-	fsl,saif-master = <&saif0>;
-	status = "okay";
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&ssp2 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&usb1 {
-      status = "okay";
-};
-
-&usbphy1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins_a>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
deleted file mode 100644
index d004b1cbb4ae1..0000000000000
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Free Electrons
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Crystalfontz CFA-10036 Board";
-	compatible = "crystalfontz,cfa10036", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cfa10036>;
-
-		power {
-			gpios = <&gpio3 4 1>;
-			default-state = "on";
-		};
-	};
-
-	reg_vddio_sd0: vddio-sd0 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc_pwr_cfa10036>;
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 28 0>;
-	};
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_pins_b>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_b>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	ssd1306: oled@3c {
-		compatible = "solomon,ssd1306fb-i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ssd1306_cfa10036>;
-		reg = <0x3c>;
-		reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-		solomon,height = <32>;
-		solomon,width = <128>;
-		solomon,page-offset = <0>;
-		solomon,com-lrremap;
-		solomon,com-invdir;
-		solomon,com-offset = <32>;
-	};
-};
-
-&pinctrl {
-	ssd1306_cfa10036: ssd1306-10036@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP0_DATA7__GPIO_2_7
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	led_pins_cfa10036: leds-10036@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_AUART1_RX__GPIO_3_4
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	usb0_otg_cfa10036: otg-10036@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_RDY0__USB0_ID
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			0x31c3 /*
-			MX28_PAD_PWM3__GPIO_3_28 */
-		>;
-		fsl,drive-strength = <0>;
-		fsl,voltage = <1>;
-		fsl,pull-up = <0>;
-	};
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_4bit_pins_a
-		&mmc0_cd_cfg &mmc0_sck_cfg>;
-	vmmc-supply = <&reg_vddio_sd0>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_otg_cfa10036>;
-	dr_mode = "peripheral";
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
deleted file mode 100644
index d3e9a731525bc..0000000000000
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Free Electrons
- */
-
-/*
- * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10037 Board";
-	compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10037: usb-10037@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_cfa10037: mac0-10037@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__GPIO_2_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a
-				&mac0_pins_cfa10037>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10037>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
deleted file mode 100644
index 94d6614c1983d..0000000000000
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ /dev/null
@@ -1,418 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Free Electrons
- */
-
-/*
- * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10049 Board";
-	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
-
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2cmux_pins_cfa10049>;
-		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-		i2c-parent = <&i2c1>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adc0: nau7802@2a {
-				compatible = "nuvoton,nau7802";
-				reg = <0x2a>;
-				nuvoton,vldo = <3000>;
-			};
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			adc1: nau7802@2a {
-				compatible = "nuvoton,nau7802";
-				reg = <0x2a>;
-				nuvoton,vldo = <3000>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-				adc2: nau7802@2a {
-				compatible = "nuvoton,nau7802";
-				reg = <0x2a>;
-				nuvoton,vldo = <3000>;
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				compatible = "nxp,pca9555";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pca_pins_cfa10049>;
-				interrupt-parent = <&gpio2>;
-				interrupts = <19 0x2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x20>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10049>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	spi-2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-			im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
-		};
-	};
-
-	spi-3 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi3_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio0 24 0>;
-		gpio-mosi = <&gpio0 28 0>;
-		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
-		num-chipselects = <3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio5: gpio5@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <2>;
-			spi-max-frequency = <100000>;
-		};
-
-		gpio6: gpio6@1 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <1>;
-			registers-number = <4>;
-			spi-max-frequency = <100000>;
-		};
-
-		dac0: dh2228@2 {
-			compatible = "rohm,dh2228fv";
-			reg = <2>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
-
-		rotary-button {
-			label = "rotary_button";
-			gpios = <&gpio3 26 1>;
-			debounce-interval = <10>;
-			linux,code = <28>;
-		};
-	};
-
-	rotary {
-		compatible = "rotary-encoder";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_pins_cfa10049>;
-		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
-		linux,axis = <1>; /* REL_Y */
-		rotary-encoder,relative-axis;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&w1_gpio_pins>;
-		status = "okay";
-		gpios = <&gpio1 21 0>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_18bit_pins_cfa10049
-		     &lcdif_pins_cfa10049
-		     &lcdif_pins_cfa10049_pullup>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <18>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <9216000>;
-				hactive = <320>;
-				vactive = <480>;
-				hback-porch = <2>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vfront-porch = <2>;
-				hsync-len = <15>;
-				vsync-len = <15>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&lradc {
-	fsl,lradc-touchscreen-wires = <4>;
-	status = "okay";
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a
-		&mac0_pins_cfa10049>;
-	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <100>;
-	status = "okay";
-};
-
-&pinctrl {
-	usb_pins_cfa10049: usb-10049@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_D07__GPIO_0_7
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	i2cmux_pins_cfa10049: i2cmux-10049@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D22__GPIO_1_22
-			MX28_PAD_LCD_D23__GPIO_1_23
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	mac0_pins_cfa10049: mac0-10049@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP2_SS2__GPIO_2_21
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	pca_pins_cfa10049: pca-10049@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP2_SS0__GPIO_2_19
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-
-	rotary_pins_cfa10049: rotary-10049@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_I2C0_SCL__GPIO_3_24
-			MX28_PAD_I2C0_SDA__GPIO_3_25
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-
-	rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SAIF1_SDATA0__GPIO_3_26
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-
-	spi2_pins_cfa10049: spi2-cfa10049@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP2_SCK__GPIO_2_16
-			MX28_PAD_SSP2_MOSI__GPIO_2_17
-			MX28_PAD_SSP2_MISO__GPIO_2_18
-			MX28_PAD_AUART1_TX__GPIO_3_5
-		>;
-		fsl,drive-strength = <MXS_DRIVE_8mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-
-	spi3_pins_cfa10049: spi3-cfa10049@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_RDN__GPIO_0_24
-			MX28_PAD_GPMI_RESETN__GPIO_0_28
-			MX28_PAD_GPMI_CE1N__GPIO_0_17
-			MX28_PAD_GPMI_ALE__GPIO_0_26
-			MX28_PAD_GPMI_CLE__GPIO_0_27
-		>;
-		fsl,drive-strength = <MXS_DRIVE_8mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-
-	lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D00__LCD_D0
-			MX28_PAD_LCD_D01__LCD_D1
-			MX28_PAD_LCD_D02__LCD_D2
-			MX28_PAD_LCD_D03__LCD_D3
-			MX28_PAD_LCD_D04__LCD_D4
-			MX28_PAD_LCD_D05__LCD_D5
-			MX28_PAD_LCD_D06__LCD_D6
-			MX28_PAD_LCD_D07__LCD_D7
-			MX28_PAD_LCD_D08__LCD_D8
-			MX28_PAD_LCD_D09__LCD_D9
-			MX28_PAD_LCD_D10__LCD_D10
-			MX28_PAD_LCD_D11__LCD_D11
-			MX28_PAD_LCD_D12__LCD_D12
-			MX28_PAD_LCD_D13__LCD_D13
-			MX28_PAD_LCD_D14__LCD_D14
-			MX28_PAD_LCD_D15__LCD_D15
-			MX28_PAD_LCD_D16__LCD_D16
-			MX28_PAD_LCD_D17__LCD_D17
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_cfa10049: lcdif-evk@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RD_E__LCD_VSYNC
-			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-			MX28_PAD_LCD_RS__LCD_DOTCLK
-			MX28_PAD_LCD_CS__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RESET__GPIO_3_30
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-
-	w1_gpio_pins: w1-gpio@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D21__GPIO_1_21
-		>;
-		fsl,drive-strength = <MXS_DRIVE_8mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm3_pins_b>;
-	status = "okay";
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	pinctrl-0 = <&usb1_pins_a>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
deleted file mode 100644
index 42ba7da48beb9..0000000000000
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * 				  Free Electrons
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10055 Board";
-	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	spi-2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10055>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_18bit_pins_cfa10055
-		     &lcdif_pins_cfa10055
-		     &lcdif_pins_cfa10055_pullup>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <18>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <9216000>;
-				hactive = <320>;
-				vactive = <480>;
-				hback-porch = <2>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vfront-porch = <2>;
-				hsync-len = <15>;
-				vsync-len = <15>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&lradc {
-	fsl,lradc-touchscreen-wires = <4>;
-	status = "okay";
-};
-
-&pinctrl {
-	spi2_pins_cfa10055: spi2-cfa10055@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP2_SCK__GPIO_2_16
-			MX28_PAD_SSP2_MOSI__GPIO_2_17
-			MX28_PAD_SSP2_MISO__GPIO_2_18
-			MX28_PAD_AUART1_TX__GPIO_3_5
-		>;
-		fsl,drive-strength = <MXS_DRIVE_8mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-
-	lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D00__LCD_D0
-			MX28_PAD_LCD_D01__LCD_D1
-			MX28_PAD_LCD_D02__LCD_D2
-			MX28_PAD_LCD_D03__LCD_D3
-			MX28_PAD_LCD_D04__LCD_D4
-			MX28_PAD_LCD_D05__LCD_D5
-			MX28_PAD_LCD_D06__LCD_D6
-			MX28_PAD_LCD_D07__LCD_D7
-			MX28_PAD_LCD_D08__LCD_D8
-			MX28_PAD_LCD_D09__LCD_D9
-			MX28_PAD_LCD_D10__LCD_D10
-			MX28_PAD_LCD_D11__LCD_D11
-			MX28_PAD_LCD_D12__LCD_D12
-			MX28_PAD_LCD_D13__LCD_D13
-			MX28_PAD_LCD_D14__LCD_D14
-			MX28_PAD_LCD_D15__LCD_D15
-			MX28_PAD_LCD_D16__LCD_D16
-			MX28_PAD_LCD_D17__LCD_D17
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_cfa10055: lcdif-evk@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RD_E__LCD_VSYNC
-			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-			MX28_PAD_LCD_RS__LCD_DOTCLK
-			MX28_PAD_LCD_CS__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RESET__GPIO_3_30
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm3_pins_b>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
deleted file mode 100644
index 0e15bdfd7281c..0000000000000
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Free Electrons
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10056 Board";
-	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	spi-2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10056>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8369: hx8369@0 {
-			compatible = "himax,hx8369a", "himax,hx8369";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-};
-
-&pinctrl {
-	spi2_pins_cfa10056: spi2-cfa10056@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP2_SCK__GPIO_2_16
-			MX28_PAD_SSP2_MOSI__GPIO_2_17
-			MX28_PAD_SSP2_MISO__GPIO_2_18
-			MX28_PAD_AUART1_TX__GPIO_3_5
-		>;
-		fsl,drive-strength = <MXS_DRIVE_8mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-
-	lcdif_pins_cfa10056: lcdif-10056@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RD_E__LCD_VSYNC
-			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-			MX28_PAD_LCD_RS__LCD_DOTCLK
-			MX28_PAD_LCD_CS__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RESET__GPIO_3_30
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_24bit_pins_a
-			&lcdif_pins_cfa10056
-			&lcdif_pins_cfa10056_pullup >;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <32000000>;
-				hactive = <480>;
-				vactive = <800>;
-				hback-porch = <2>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vfront-porch = <2>;
-				hsync-len = <5>;
-				vsync-len = <5>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
deleted file mode 100644
index 27602c01f162f..0000000000000
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2012 Free Electrons
- */
-
-/*
- * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10057 Board";
-	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10057>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_18bit_pins_cfa10057
-		     &lcdif_pins_cfa10057>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <18>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <30000000>;
-				hactive = <480>;
-				vactive = <800>;
-				hfront-porch = <12>;
-				hback-porch = <2>;
-				vfront-porch = <5>;
-				vback-porch = <3>;
-				hsync-len = <2>;
-				vsync-len = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&lradc {
-	fsl,lradc-touchscreen-wires = <4>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>;
-	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <100>;
-	status = "okay";
-};
-
-&pinctrl {
-	usb_pins_cfa10057: usb-10057@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_D07__GPIO_0_7
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D00__LCD_D0
-			MX28_PAD_LCD_D01__LCD_D1
-			MX28_PAD_LCD_D02__LCD_D2
-			MX28_PAD_LCD_D03__LCD_D3
-			MX28_PAD_LCD_D04__LCD_D4
-			MX28_PAD_LCD_D05__LCD_D5
-			MX28_PAD_LCD_D06__LCD_D6
-			MX28_PAD_LCD_D07__LCD_D7
-			MX28_PAD_LCD_D08__LCD_D8
-			MX28_PAD_LCD_D09__LCD_D9
-			MX28_PAD_LCD_D10__LCD_D10
-			MX28_PAD_LCD_D11__LCD_D11
-			MX28_PAD_LCD_D12__LCD_D12
-			MX28_PAD_LCD_D13__LCD_D13
-			MX28_PAD_LCD_D14__LCD_D14
-			MX28_PAD_LCD_D15__LCD_D15
-			MX28_PAD_LCD_D16__LCD_D16
-			MX28_PAD_LCD_D17__LCD_D17
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_cfa10057: lcdif-evk@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RD_E__LCD_VSYNC
-			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-			MX28_PAD_LCD_RS__LCD_DOTCLK
-			MX28_PAD_LCD_CS__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm4_pins_a>;
-	status = "okay";
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	pinctrl-0 = <&usb1_pins_a>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
deleted file mode 100644
index 931c4d089b269..0000000000000
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2013 Free Electrons
- */
-
-/*
- * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10058 Board";
-	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10058>;
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_24bit_pins_a
-			 &lcdif_pins_cfa10058>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <40>;
-				hfront-porch = <40>;
-				vback-porch = <13>;
-				vfront-porch = <29>;
-				hsync-len = <8>;
-				vsync-len = <8>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&lradc {
-	fsl,lradc-touchscreen-wires = <4>;
-	status = "okay";
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>;
-	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <100>;
-	status = "okay";
-};
-
-&pinctrl {
-	usb_pins_cfa10058: usb-10058@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_D07__GPIO_0_7
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_cfa10058: lcdif-10058@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RD_E__LCD_VSYNC
-			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-			MX28_PAD_LCD_RS__LCD_DOTCLK
-			MX28_PAD_LCD_CS__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm3_pins_b>;
-	status = "okay";
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	pinctrl-0 = <&usb1_pins_a>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
deleted file mode 100644
index b73020ff1053d..0000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include "imx28-duckbill-2.dts"
-
-/ {
-	model = "I2SE Duckbill 2 485";
-	compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
-
-	leds {
-		rs485-red {
-			label = "duckbill:red:rs485";
-			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		};
-
-		rs485-green {
-			label = "duckbill:green:rs485";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "disabled";
-};
-
-&led_pins {
-	fsl,pinmux-ids = <
-		MX28_PAD_SAIF0_MCLK__GPIO_3_20
-		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-		MX28_PAD_I2C0_SCL__GPIO_3_24
-		MX28_PAD_I2C0_SDA__GPIO_3_25
-	>;
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
deleted file mode 100644
index 473d99b9b42f5..0000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "imx28-duckbill-2.dts"
-
-/ {
-	model = "I2SE Duckbill 2 EnOcean";
-	compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
-
-	leds {
-		enocean-blue {
-			label = "duckbill:blue:enocean";
-			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		};
-
-		enocean-red {
-			label = "duckbill:red:enocean";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-		};
-
-		enocean-green {
-			label = "duckbill:green:enocean";
-			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&enocean_button>;
-
-		key-enocean {
-			label = "EnOcean";
-			linux,code = <KEY_NEW>;
-			gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "disabled";
-};
-
-&led_pins {
-	fsl,pinmux-ids = <
-		MX28_PAD_SAIF0_MCLK__GPIO_3_20
-		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-		MX28_PAD_AUART0_CTS__GPIO_3_2
-		MX28_PAD_I2C0_SCL__GPIO_3_24
-		MX28_PAD_I2C0_SDA__GPIO_3_25
-	>;
-};
-
-&pinctrl {
-	enocean_button: enocean-button@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_AUART0_RTS__GPIO_3_3
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
deleted file mode 100644
index 859d97a5a7751..0000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include "imx28-duckbill-2.dts"
-
-/ {
-	model = "I2SE Duckbill 2 SPI";
-	compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
-
-	aliases {
-		ethernet1 = &qca7000;
-	};
-};
-
-&auart0 {
-	status = "disabled";
-};
-
-&i2c0 {
-	status = "disabled";
-};
-
-&pinctrl {
-	qca7000_pins: qca7000@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
-			MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
-			MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
-			MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
-			MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
-			MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&ssp2 {
-	compatible = "fsl,imx28-spi";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>;
-	/delete-property/ bus-width;
-	/delete-property/ vmmc-supply;
-	status = "okay";
-
-	qca7000: ethernet@0 {
-		reg = <0>;
-		compatible = "qca,qca7000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&qca7000_pins>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-		spi-cpha;
-		spi-cpol;
-		spi-max-frequency = <8000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts
deleted file mode 100644
index 4e28212e96260..0000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2.dts
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2";
-	compatible = "i2se,duckbill-2", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&auart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart0_2pins_a>;
-	status = "okay";
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_pins_a>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&lradc {
-	status = "okay";
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-	phy-supply = <&reg_3p3v>;
-	phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <25>;
-	phy-handle = <&ethphy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_phy_int_pin>;
-			interrupt-parent = <&gpio0>;
-			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-			max-speed = <100>;
-		};
-	};
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_a>;
-
-	hog_pins_a: hog@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	mac0_phy_reset_pin: mac0-phy-reset@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	mac0_phy_int_pin: mac0-phy-int@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	led_pins: leds@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SAIF0_MCLK__GPIO_3_20
-			MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_8bit_pins_a
-		&mmc0_cd_cfg &mmc0_sck_cfg>;
-	bus-width = <8>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-	non-removable;
-};
-
-&ssp2 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_4bit_pins_b
-		&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "peripheral";
-};
-
-&usbphy0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
deleted file mode 100644
index 13ffd533fdea7..0000000000000
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de>
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill";
-	compatible = "i2se,duckbill", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&auart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart0_2pins_a>;
-	status = "okay";
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_pins_a>;
-	status = "okay";
-};
-
-&lradc {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-	phy-supply = <&reg_3p3v>;
-	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <25>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_a>;
-
-	hog_pins_a: hog@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	mac0_phy_reset_pin: mac0-phy-reset@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	led_pins: leds@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_AUART1_RX__GPIO_3_4
-			MX28_PAD_AUART1_TX__GPIO_3_5
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_4bit_pins_a
-		&mmc0_cd_cfg &mmc0_sck_cfg>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&ssp2 {
-	compatible = "fsl,imx28-spi";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>;
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
deleted file mode 100644
index 29f8a3a245d42..0000000000000
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-/*
- * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
- */
-
-/dts-v1/;
-#include "imx28-eukrea-mbmx28lc.dtsi"
-
-/ {
-	model = "Eukrea Electromatique MBMX283LC";
-	compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x04000000>;
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmi_pins_a>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	pcf8563: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>;
-	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pinctrl{
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_cpuimx283>;
-
-	hog_pins_cpuimx283: hog-cpuimx283@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
deleted file mode 100644
index cd875ace168d7..0000000000000
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-/*
- * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC
- */
-
-#include "imx28-eukrea-mbmx283lc.dts"
-
-/ {
-	model = "Eukrea Electromatique MBMX287LC";
-	compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-};
-
-&mac1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac1_pins_a>;
-	phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>;
-	hog_pins_cpuimx287: hog-cpuimx287@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SPDIF__GPIO_3_27
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
deleted file mode 100644
index b285a946e2c2a..0000000000000
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
+++ /dev/null
@@ -1,323 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "Eukrea Electromatique MBMX28LC";
-	compatible = "eukrea,mbmx28lc", "fsl,imx28";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 1000000>;
-		brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
-		default-brightness-level = <10>;
-	};
-
-	gpio-keys-0 {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
-
-		switch-sw3 {
-			label = "SW3";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-		};
-	};
-
-	gpio-keys-1 {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
-
-		switch-sw4 {
-			label = "SW4";
-			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-		};
-	};
-
-	led-d6 {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_d6_pins_mbmx28lc>;
-
-		led1 {
-			label = "d6";
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	led-d7 {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_d7_pins_mbmx28lc>;
-
-		led1 {
-			label = "d7";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_lcd_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb0_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx28-mbmx28lc-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-mbmx28lc-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_4pins_a>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&saif0>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
-	lcd-supply = <&reg_lcd_3v3>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		model = "43WVF1G-0";
-		bits-per-pixel = <16>;
-		bus-width = <18>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <9072000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <10>;
-				hfront-porch = <5>;
-				vback-porch = <8>;
-				vfront-porch = <8>;
-				hsync-len = <40>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&lradc {
-	fsl,lradc-touchscreen-wires = <4>;
-	status = "okay";
-};
-
-&pinctrl {
-	gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D21__GPIO_1_21
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D20__GPIO_1_20
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_VSYNC__LCD_VSYNC
-			MX28_PAD_LCD_HSYNC__LCD_HSYNC
-			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-			MX28_PAD_LCD_ENABLE__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D23__GPIO_1_23
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D22__GPIO_1_22
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RESET__GPIO_3_30
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D18__GPIO_1_18
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D19__GPIO_1_19
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm4_pins_a>;
-	status = "okay";
-};
-
-&saif0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif0_pins_a>;
-	status = "okay";
-};
-
-&saif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif1_pins_a>;
-	fsl,saif-master = <&saif0>;
-	status = "okay";
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
-	bus-width = <4>;
-	cd-inverted;
-	status = "okay";
-};
-
-&usb0 {
-	disable-over-current;
-	vbus-supply = <&reg_usb0_vbus>;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_pins_b>;
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
deleted file mode 100644
index 783abb82b2a8e..0000000000000
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ /dev/null
@@ -1,352 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Freescale i.MX28 Evaluation Kit";
-	compatible = "fsl,imx28-evk", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_vddio_sd0: regulator-vddio-sd0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 28 0>;
-	};
-
-	reg_fec_3v3: regulator-fec-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fec-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 15 0>;
-	};
-
-	reg_usb0_vbus: regulator-usb0-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb0_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 9 0>;
-		enable-active-high;
-	};
-
-	reg_usb1_vbus: regulator-usb1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 8 0>;
-		enable-active-high;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 30 0>;
-		enable-active-high;
-	};
-
-	reg_can_3v3: regulator-can-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 13 0>;
-		enable-active-high;
-	};
-
-	reg_lcd_5v: regulator-lcd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx28-evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio3_5>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 5 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight_display: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
-
-&auart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart0_pins_a>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&auart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart3_pins_a>;
-	status = "okay";
-};
-
-&can0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&can0_pins_a>;
-	xceiver-supply = <&reg_can_3v3>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&can1_pins_a>;
-	xceiver-supply = <&reg_can_3v3>;
-	status = "okay";
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_pins_a>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
-		     &gpmi_pins_evk>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_24bit_pins_a
-		     &lcdif_pins_evk>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&lradc {
-	fsl,lradc-touchscreen-wires = <4>;
-	fsl,ave-ctrl = <4>;
-	fsl,ave-delay = <2>;
-	fsl,settling = <10>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&saif0>;
-	};
-
-	at24@51 {
-		compatible = "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x51>;
-	};
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>;
-	phy-supply = <&reg_fec_3v3>;
-	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <100>;
-	status = "okay";
-};
-
-&mac1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac1_pins_a>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_a>;
-
-	hog_pins_a: hog@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP1_CMD__GPIO_2_13
-			MX28_PAD_SSP1_DATA3__GPIO_2_15
-			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-			MX28_PAD_SSP1_SCK__GPIO_2_12
-			MX28_PAD_PWM3__GPIO_3_28
-			MX28_PAD_LCD_RESET__GPIO_3_30
-			MX28_PAD_AUART2_RX__GPIO_3_8
-			MX28_PAD_AUART2_TX__GPIO_3_9
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	led_pin_gpio3_5: led_gpio3_5@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_AUART1_TX__GPIO_3_5
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	gpmi_pins_evk: gpmi-nand-evk@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_CE1N__GPMI_CE1N
-			MX28_PAD_GPMI_RDY1__GPMI_READY1
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_evk: lcdif-evk@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RD_E__LCD_VSYNC
-			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-			MX28_PAD_LCD_RS__LCD_DOTCLK
-			MX28_PAD_LCD_CS__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm2_pins_a>;
-	status = "okay";
-};
-
-&saif0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif0_pins_a>;
-	status = "okay";
-};
-
-&saif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif1_pins_a>;
-	fsl,saif-master = <&saif0>;
-	status = "okay";
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_8bit_pins_a
-		&mmc0_cd_cfg &mmc0_sck_cfg>;
-	bus-width = <8>;
-	wp-gpios = <&gpio2 12 0>;
-	vmmc-supply = <&reg_vddio_sd0>;
-	status = "okay";
-};
-
-&ssp1 {
-	compatible = "fsl,imx28-mmc";
-	bus-width = <8>;
-	wp-gpios = <&gpio0 28 0>;
-};
-
-&ssp2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx28-spi";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>;
-	status = "okay";
-
-	flash: flash@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		spi-max-frequency = <40000000>;
-	};
-};
-
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_pins_a>;
-	vbus-supply = <&reg_usb0_vbus>;
-	status = "okay";
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-lwe.dtsi b/arch/arm/boot/dts/imx28-lwe.dtsi
deleted file mode 100644
index bb971e660db8e..0000000000000
--- a/arch/arm/boot/dts/imx28-lwe.dtsi
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2021
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	aliases {
-		spi2 = &ssp3;
-	};
-
-	chosen {
-		bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1";
-	};
-
-	memory@40000000 {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	reg_3v3: regulator-reg-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_usb_5v: regulator-reg-usb-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_fec_3v3: regulator-reg-fec-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fec-phy";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_pins_a>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&saif0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif0_pins_a>;
-	#sound-dai-cells = <0>;
-	assigned-clocks = <&clks 53>;
-	assigned-clock-rates = <12000000>;
-	status = "okay";
-};
-
-&saif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif1_pins_a>;
-	fsl,saif-master = <&saif0>;
-	#sound-dai-cells = <0>;
-	status = "okay";
-};
-
-&spi3_pins_a {
-	fsl,pinmux-ids = <
-		MX28_PAD_AUART2_RX__SSP3_D4
-		MX28_PAD_AUART2_TX__SSP3_D5
-		MX28_PAD_SSP3_SCK__SSP3_SCK
-		MX28_PAD_SSP3_MOSI__SSP3_CMD
-		MX28_PAD_SSP3_MISO__SSP3_D0
-		MX28_PAD_SSP3_SS0__SSP3_D3
-		MX28_PAD_AUART2_TX__GPIO_3_9
-	>;
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_8bit_pins_a>;
-	bus-width = <8>;
-	vmmc-supply = <&reg_3v3>;
-	non-removable;
-	status = "okay";
-};
-
-&ssp2 {
-	compatible = "fsl,imx28-spi";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>;
-	status = "okay";
-};
-
-&ssp3 {
-	compatible = "fsl,imx28-spi";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi3_pins_a>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <40000000>;
-		reg = <0>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "env0";
-				reg = <0x80000 0x10000>;
-			};
-
-			partition@90000 {
-				label = "env1";
-				reg = <0x90000 0x10000>;
-			};
-
-			partition@100000 {
-				label = "kernel";
-				reg = <0x100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "swupdate";
-				reg = <0x500000 0x800000>;
-			};
-		};
-	};
-};
-
-&usb0 {
-	vbus-supply = <&reg_usb_5v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb_5v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins_b>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
deleted file mode 100644
index c08b14ad7cd53..0000000000000
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- */
-
-#include "imx28.dtsi"
-
-/ {
-	model = "Aries/DENX M28";
-	compatible = "aries,m28", "denx,m28", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&gpmi {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	rtc: rtc@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
deleted file mode 100644
index 6b01de9efd024..0000000000000
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ /dev/null
@@ -1,258 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "MSR M28CU3";
-	compatible = "msr,m28cu3", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_gpio>;
-
-		user1 {
-			label = "sd0-led";
-			gpios = <&gpio2 26 0>;
-			linux,default-trigger = "mmc0";
-		};
-
-		user2 {
-			label = "sd1-led";
-			gpios = <&gpio2 24 0>;
-			linux,default-trigger = "mmc2";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 29 0>;
-		};
-
-		reg_vddio_sd1: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vddio-sd1";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 19 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 8 0>;
-			enable-active-high;
-		};
-	};
-};
-
-&auart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart0_2pins_a>;
-	status = "okay";
-};
-
-&auart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart3_2pins_b>;
-	status = "okay";
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_pins_b>;
-	status = "okay";
-};
-
-&gpmi {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-	status = "okay";
-
-	partition@0 {
-		label = "gpmi-nfc-0-boot";
-		reg = <0x00000000 0x01400000>;
-		read-only;
-	};
-
-	partition@1 {
-		label = "gpmi-nfc-general-use";
-		reg = <0x01400000 0x0ec00000>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_24bit_pins_a
-		     &lcdif_pins_m28>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <6410256>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vfront-porch = <5>;
-				hsync-len = <30>;
-				vsync-len = <3>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>;
-	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <100>;
-	status = "okay";
-};
-
-&mac1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac1_pins_a>;
-	status = "okay";
-};
-
-&ocotp {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_a>;
-
-	hog_pins_a: hog@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP2_SS0__GPIO_2_19
-			MX28_PAD_PWM4__GPIO_3_29
-			MX28_PAD_AUART2_RX__GPIO_3_8
-			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_m28: lcdif-m28@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_VSYNC__LCD_VSYNC
-			MX28_PAD_LCD_HSYNC__LCD_HSYNC
-			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-			MX28_PAD_LCD_RESET__LCD_RESET
-			MX28_PAD_LCD_CS__LCD_ENABLE
-			MX28_PAD_AUART1_TX__GPIO_3_5
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	led_pins_gpio: leds-m28@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP3_MISO__GPIO_2_26
-			MX28_PAD_SSP3_SCK__GPIO_2_24
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm3_pins_a>;
-	status = "okay";
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_4bit_pins_a
-		     &mmc0_cd_cfg
-		     &mmc0_sck_cfg>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_vddio_sd0>;
-	status = "okay";
-};
-
-&ssp2 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_4bit_pins_a
-		     &mmc2_cd_cfg
-		     &mmc2_sck_cfg_a>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_vddio_sd1>;
-	status = "okay";
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins_a>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
deleted file mode 100644
index e350d57a4cec0..0000000000000
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ /dev/null
@@ -1,263 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx28-m28.dtsi"
-
-/ {
-	model = "Aries/DENX M28EVK";
-	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	regulators {
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 28 0>;
-		};
-
-		reg_usb0_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 12 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 13 0>;
-		};
-	};
-
-	sound {
-		compatible = "denx,m28evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "m28evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-};
-
-&auart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart0_pins_a>;
-	status = "okay";
-};
-
-&auart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart1_pins_a>;
-	status = "okay";
-};
-
-&auart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart2_2pins_b>;
-	status = "okay";
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_pins_a>;
-	status = "okay";
-};
-
-&i2c0 {
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&saif0>;
-	};
-
-	eeprom: eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-		pagesize = <32>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_24bit_pins_a
-		     &lcdif_pins_m28>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <16>;
-		bus-width = <18>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <33260000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <0>;
-				hfront-porch = <256>;
-				vback-porch = <0>;
-				vfront-porch = <45>;
-				hsync-len = <1>;
-				vsync-len = <1>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&lradc {
-	status = "okay";
-	fsl,lradc-touchscreen-wires = <4>;
-};
-
-&can0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&can0_pins_a>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&can1_pins_a>;
-	status = "okay";
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>;
-	clocks = <&clks 57>, <&clks 57>;
-	clock-names = "ipg", "ahb";
-	status = "okay";
-};
-
-&mac1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac1_pins_a>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_a>;
-
-	hog_pins_a: hog@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_PWM3__GPIO_3_28
-			MX28_PAD_AUART2_CTS__GPIO_3_10
-			MX28_PAD_AUART2_RTS__GPIO_3_11
-			MX28_PAD_AUART3_RX__GPIO_3_12
-			MX28_PAD_AUART3_TX__GPIO_3_13
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_m28: lcdif-m28@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-			MX28_PAD_LCD_ENABLE__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm4_pins_a>;
-	status = "okay";
-};
-
-&saif0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif0_pins_a>;
-	status = "okay";
-};
-
-&saif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif1_pins_a>;
-	fsl,saif-master = <&saif0>;
-	status = "okay";
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_8bit_pins_a
-		     &mmc0_cd_cfg
-		     &mmc0_sck_cfg>;
-	bus-width = <8>;
-	wp-gpios = <&gpio3 10 0>;
-	vmmc-supply = <&reg_vddio_sd0>;
-	status = "okay";
-};
-
-&ssp2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx28-spi";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>;
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p80", "jedec,spi-nor";
-		spi-max-frequency = <40000000>;
-		reg = <0>;
-	};
-};
-
-&usb0 {
-	vbus-supply = <&reg_usb0_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins_a>;
-	status = "okay";
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins_a>;
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-pinfunc.h b/arch/arm/boot/dts/imx28-pinfunc.h
deleted file mode 100644
index d427e6c2fa780..0000000000000
--- a/arch/arm/boot/dts/imx28-pinfunc.h
+++ /dev/null
@@ -1,500 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Header providing constants for i.MX28 pinctrl bindings.
- *
- * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- */
-
-#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
-#define __DT_BINDINGS_MX28_PINCTRL_H__
-
-#include "mxs-pinfunc.h"
-
-#define MX28_PAD_GPMI_D00__GPMI_D0			0x0000
-#define MX28_PAD_GPMI_D01__GPMI_D1			0x0010
-#define MX28_PAD_GPMI_D02__GPMI_D2			0x0020
-#define MX28_PAD_GPMI_D03__GPMI_D3			0x0030
-#define MX28_PAD_GPMI_D04__GPMI_D4			0x0040
-#define MX28_PAD_GPMI_D05__GPMI_D5			0x0050
-#define MX28_PAD_GPMI_D06__GPMI_D6			0x0060
-#define MX28_PAD_GPMI_D07__GPMI_D7			0x0070
-#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
-#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
-#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
-#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
-#define MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
-#define MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
-#define MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
-#define MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
-#define MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
-#define MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
-#define MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
-#define MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
-#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
-#define MX28_PAD_LCD_D00__LCD_D0			0x1000
-#define MX28_PAD_LCD_D01__LCD_D1			0x1010
-#define MX28_PAD_LCD_D02__LCD_D2			0x1020
-#define MX28_PAD_LCD_D03__LCD_D3			0x1030
-#define MX28_PAD_LCD_D04__LCD_D4			0x1040
-#define MX28_PAD_LCD_D05__LCD_D5			0x1050
-#define MX28_PAD_LCD_D06__LCD_D6			0x1060
-#define MX28_PAD_LCD_D07__LCD_D7			0x1070
-#define MX28_PAD_LCD_D08__LCD_D8			0x1080
-#define MX28_PAD_LCD_D09__LCD_D9			0x1090
-#define MX28_PAD_LCD_D10__LCD_D10			0x10a0
-#define MX28_PAD_LCD_D11__LCD_D11			0x10b0
-#define MX28_PAD_LCD_D12__LCD_D12			0x10c0
-#define MX28_PAD_LCD_D13__LCD_D13			0x10d0
-#define MX28_PAD_LCD_D14__LCD_D14			0x10e0
-#define MX28_PAD_LCD_D15__LCD_D15			0x10f0
-#define MX28_PAD_LCD_D16__LCD_D16			0x1100
-#define MX28_PAD_LCD_D17__LCD_D17			0x1110
-#define MX28_PAD_LCD_D18__LCD_D18			0x1120
-#define MX28_PAD_LCD_D19__LCD_D19			0x1130
-#define MX28_PAD_LCD_D20__LCD_D20			0x1140
-#define MX28_PAD_LCD_D21__LCD_D21			0x1150
-#define MX28_PAD_LCD_D22__LCD_D22			0x1160
-#define MX28_PAD_LCD_D23__LCD_D23			0x1170
-#define MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
-#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
-#define MX28_PAD_LCD_RS__LCD_RS				0x11a0
-#define MX28_PAD_LCD_CS__LCD_CS				0x11b0
-#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
-#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
-#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
-#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
-#define MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
-#define MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
-#define MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
-#define MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
-#define MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
-#define MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
-#define MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
-#define MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
-#define MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
-#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
-#define MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
-#define MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
-#define MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
-#define MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
-#define MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
-#define MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
-#define MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
-#define MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
-#define MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
-#define MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
-#define MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
-#define MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
-#define MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
-#define MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
-#define MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
-#define MX28_PAD_AUART0_RX__AUART0_RX			0x3000
-#define MX28_PAD_AUART0_TX__AUART0_TX			0x3010
-#define MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
-#define MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
-#define MX28_PAD_AUART1_RX__AUART1_RX			0x3040
-#define MX28_PAD_AUART1_TX__AUART1_TX			0x3050
-#define MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
-#define MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
-#define MX28_PAD_AUART2_RX__AUART2_RX			0x3080
-#define MX28_PAD_AUART2_TX__AUART2_TX			0x3090
-#define MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
-#define MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
-#define MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
-#define MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
-#define MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
-#define MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
-#define MX28_PAD_PWM0__PWM_0				0x3100
-#define MX28_PAD_PWM1__PWM_1				0x3110
-#define MX28_PAD_PWM2__PWM_2				0x3120
-#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
-#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
-#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
-#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
-#define MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
-#define MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
-#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
-#define MX28_PAD_SPDIF__SPDIF_TX			0x31b0
-#define MX28_PAD_PWM3__PWM_3				0x31c0
-#define MX28_PAD_PWM4__PWM_4				0x31d0
-#define MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
-#define MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
-#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
-#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
-#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
-#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
-#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
-#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
-#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
-#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
-#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
-#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
-#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
-#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
-#define MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
-#define MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
-#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
-#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
-#define MX28_PAD_EMI_D00__EMI_DATA0			0x5000
-#define MX28_PAD_EMI_D01__EMI_DATA1			0x5010
-#define MX28_PAD_EMI_D02__EMI_DATA2			0x5020
-#define MX28_PAD_EMI_D03__EMI_DATA3			0x5030
-#define MX28_PAD_EMI_D04__EMI_DATA4			0x5040
-#define MX28_PAD_EMI_D05__EMI_DATA5			0x5050
-#define MX28_PAD_EMI_D06__EMI_DATA6			0x5060
-#define MX28_PAD_EMI_D07__EMI_DATA7			0x5070
-#define MX28_PAD_EMI_D08__EMI_DATA8			0x5080
-#define MX28_PAD_EMI_D09__EMI_DATA9			0x5090
-#define MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
-#define MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
-#define MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
-#define MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
-#define MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
-#define MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
-#define MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
-#define MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
-#define MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
-#define MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
-#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
-#define MX28_PAD_EMI_CLK__EMI_CLK			0x5150
-#define MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
-#define MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
-#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
-#define MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
-#define MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
-#define MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
-#define MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
-#define MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
-#define MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
-#define MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
-#define MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
-#define MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
-#define MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
-#define MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
-#define MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
-#define MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
-#define MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
-#define MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
-#define MX28_PAD_EMI_BA0__EMI_BA0			0x6100
-#define MX28_PAD_EMI_BA1__EMI_BA1			0x6110
-#define MX28_PAD_EMI_BA2__EMI_BA2			0x6120
-#define MX28_PAD_EMI_CASN__EMI_CASN			0x6130
-#define MX28_PAD_EMI_RASN__EMI_RASN			0x6140
-#define MX28_PAD_EMI_WEN__EMI_WEN			0x6150
-#define MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
-#define MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
-#define MX28_PAD_EMI_CKE__EMI_CKE			0x6180
-#define MX28_PAD_GPMI_D00__SSP1_D0			0x0001
-#define MX28_PAD_GPMI_D01__SSP1_D1			0x0011
-#define MX28_PAD_GPMI_D02__SSP1_D2			0x0021
-#define MX28_PAD_GPMI_D03__SSP1_D3			0x0031
-#define MX28_PAD_GPMI_D04__SSP1_D4			0x0041
-#define MX28_PAD_GPMI_D05__SSP1_D5			0x0051
-#define MX28_PAD_GPMI_D06__SSP1_D6			0x0061
-#define MX28_PAD_GPMI_D07__SSP1_D7			0x0071
-#define MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
-#define MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
-#define MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
-#define MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
-#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
-#define MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
-#define MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
-#define MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
-#define MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
-#define MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
-#define MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
-#define MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
-#define MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
-#define MX28_PAD_LCD_D03__ETM_DA8			0x1031
-#define MX28_PAD_LCD_D04__ETM_DA9			0x1041
-#define MX28_PAD_LCD_D08__ETM_DA3			0x1081
-#define MX28_PAD_LCD_D09__ETM_DA4			0x1091
-#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
-#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
-#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
-#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
-#define MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
-#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
-#define MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
-#define MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
-#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
-#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
-#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
-#define MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
-#define MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
-#define MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
-#define MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
-#define MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
-#define MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
-#define MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
-#define MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
-#define MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
-#define MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
-#define MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
-#define MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
-#define MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
-#define MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
-#define MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
-#define MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
-#define MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
-#define MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
-#define MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
-#define MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
-#define MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
-#define MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
-#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
-#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
-#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
-#define MX28_PAD_AUART1_RTS__USB0_ID			0x3071
-#define MX28_PAD_AUART2_RX__SSP3_D1			0x3081
-#define MX28_PAD_AUART2_TX__SSP3_D2			0x3091
-#define MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
-#define MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
-#define MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
-#define MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
-#define MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
-#define MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
-#define MX28_PAD_PWM0__I2C1_SCL				0x3101
-#define MX28_PAD_PWM1__I2C1_SDA				0x3111
-#define MX28_PAD_PWM2__USB0_ID				0x3121
-#define MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
-#define MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
-#define MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
-#define MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
-#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
-#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
-#define MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
-#define MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
-#define MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
-#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
-#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
-#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
-#define MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
-#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
-#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
-#define MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
-#define MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
-#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
-#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
-#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
-#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
-#define MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
-#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
-#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
-#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
-#define MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
-#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
-#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
-#define MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
-#define MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
-#define MX28_PAD_LCD_D00__ETM_DA0			0x1002
-#define MX28_PAD_LCD_D01__ETM_DA1			0x1012
-#define MX28_PAD_LCD_D02__ETM_DA2			0x1022
-#define MX28_PAD_LCD_D03__ETM_DA3			0x1032
-#define MX28_PAD_LCD_D04__ETM_DA4			0x1042
-#define MX28_PAD_LCD_D05__ETM_DA5			0x1052
-#define MX28_PAD_LCD_D06__ETM_DA6			0x1062
-#define MX28_PAD_LCD_D07__ETM_DA7			0x1072
-#define MX28_PAD_LCD_D08__ETM_DA8			0x1082
-#define MX28_PAD_LCD_D09__ETM_DA9			0x1092
-#define MX28_PAD_LCD_D10__ETM_DA10			0x10a2
-#define MX28_PAD_LCD_D11__ETM_DA11			0x10b2
-#define MX28_PAD_LCD_D12__ETM_DA12			0x10c2
-#define MX28_PAD_LCD_D13__ETM_DA13			0x10d2
-#define MX28_PAD_LCD_D14__ETM_DA14			0x10e2
-#define MX28_PAD_LCD_D15__ETM_DA15			0x10f2
-#define MX28_PAD_LCD_D16__ETM_DA7			0x1102
-#define MX28_PAD_LCD_D17__ETM_DA6			0x1112
-#define MX28_PAD_LCD_D18__ETM_DA5			0x1122
-#define MX28_PAD_LCD_D19__ETM_DA4			0x1132
-#define MX28_PAD_LCD_D20__ETM_DA3			0x1142
-#define MX28_PAD_LCD_D21__ETM_DA2			0x1152
-#define MX28_PAD_LCD_D22__ETM_DA1			0x1162
-#define MX28_PAD_LCD_D23__ETM_DA0			0x1172
-#define MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
-#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
-#define MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
-#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
-#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
-#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
-#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
-#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
-#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
-#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
-#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
-#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
-#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
-#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
-#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
-#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
-#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
-#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
-#define MX28_PAD_AUART0_RX__DUART_CTS			0x3002
-#define MX28_PAD_AUART0_TX__DUART_RTS			0x3012
-#define MX28_PAD_AUART0_CTS__DUART_RX			0x3022
-#define MX28_PAD_AUART0_RTS__DUART_TX			0x3032
-#define MX28_PAD_AUART1_RX__PWM_0			0x3042
-#define MX28_PAD_AUART1_TX__PWM_1			0x3052
-#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
-#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
-#define MX28_PAD_AUART2_RX__SSP3_D4			0x3082
-#define MX28_PAD_AUART2_TX__SSP3_D5			0x3092
-#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
-#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
-#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
-#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
-#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
-#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
-#define MX28_PAD_PWM0__DUART_RX				0x3102
-#define MX28_PAD_PWM1__DUART_TX				0x3112
-#define MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
-#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
-#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
-#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
-#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
-#define MX28_PAD_I2C0_SCL__DUART_RX			0x3182
-#define MX28_PAD_I2C0_SDA__DUART_TX			0x3192
-#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
-#define MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
-#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
-#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
-#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
-#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
-#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
-#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
-#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
-#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
-#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
-#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
-#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
-#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
-#define MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
-#define MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
-#define MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
-#define MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
-#define MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
-#define MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
-#define MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
-#define MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
-#define MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
-#define MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
-#define MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
-#define MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
-#define MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
-#define MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
-#define MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
-#define MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
-#define MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
-#define MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
-#define MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
-#define MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
-#define MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
-#define MX28_PAD_LCD_D00__GPIO_1_0			0x1003
-#define MX28_PAD_LCD_D01__GPIO_1_1			0x1013
-#define MX28_PAD_LCD_D02__GPIO_1_2			0x1023
-#define MX28_PAD_LCD_D03__GPIO_1_3			0x1033
-#define MX28_PAD_LCD_D04__GPIO_1_4			0x1043
-#define MX28_PAD_LCD_D05__GPIO_1_5			0x1053
-#define MX28_PAD_LCD_D06__GPIO_1_6			0x1063
-#define MX28_PAD_LCD_D07__GPIO_1_7			0x1073
-#define MX28_PAD_LCD_D08__GPIO_1_8			0x1083
-#define MX28_PAD_LCD_D09__GPIO_1_9			0x1093
-#define MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
-#define MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
-#define MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
-#define MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
-#define MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
-#define MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
-#define MX28_PAD_LCD_D16__GPIO_1_16			0x1103
-#define MX28_PAD_LCD_D17__GPIO_1_17			0x1113
-#define MX28_PAD_LCD_D18__GPIO_1_18			0x1123
-#define MX28_PAD_LCD_D19__GPIO_1_19			0x1133
-#define MX28_PAD_LCD_D20__GPIO_1_20			0x1143
-#define MX28_PAD_LCD_D21__GPIO_1_21			0x1153
-#define MX28_PAD_LCD_D22__GPIO_1_22			0x1163
-#define MX28_PAD_LCD_D23__GPIO_1_23			0x1173
-#define MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
-#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
-#define MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
-#define MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
-#define MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
-#define MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
-#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
-#define MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
-#define MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
-#define MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
-#define MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
-#define MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
-#define MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
-#define MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
-#define MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
-#define MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
-#define MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
-#define MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
-#define MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
-#define MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
-#define MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
-#define MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
-#define MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
-#define MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
-#define MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
-#define MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
-#define MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
-#define MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
-#define MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
-#define MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
-#define MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
-#define MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
-#define MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
-#define MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
-#define MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
-#define MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
-#define MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
-#define MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
-#define MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
-#define MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
-#define MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
-#define MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
-#define MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
-#define MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
-#define MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
-#define MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
-#define MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
-#define MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
-#define MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
-#define MX28_PAD_PWM0__GPIO_3_16			0x3103
-#define MX28_PAD_PWM1__GPIO_3_17			0x3113
-#define MX28_PAD_PWM2__GPIO_3_18			0x3123
-#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
-#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
-#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
-#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
-#define MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
-#define MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
-#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
-#define MX28_PAD_SPDIF__GPIO_3_27			0x31b3
-#define MX28_PAD_PWM3__GPIO_3_28			0x31c3
-#define MX28_PAD_PWM4__GPIO_3_29			0x31d3
-#define MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
-#define MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
-#define MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
-#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
-#define MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
-#define MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
-#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
-#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
-#define MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
-#define MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
-#define MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
-#define MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
-#define MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
-#define MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
-#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
-#define MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
-#define MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
-#define MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
-#define MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
-
-#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
deleted file mode 100644
index 5d74a68c56ff7..0000000000000
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "SchulerControl GmbH, SC SPS 1";
-	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 9 0>;
-		};
-	};
-
-	leds {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led@1 {
-			label = "sps1-1:yellow:user";
-			gpios = <&gpio0 6 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <0>;
-		};
-
-		led@2 {
-			label = "sps1-2:red:user";
-			gpios = <&gpio0 3 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <1>;
-		};
-
-		led@3 {
-			label = "sps1-3:red:user";
-			gpios = <&gpio0 0 0>;
-			default-trigger = "heartbeat";
-			reg = <2>;
-		};
-
-	};
-};
-
-&auart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart0_pins_a>;
-	status = "okay";
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_pins_a>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	rtc: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	eeprom: eeprom@52 {
-		compatible = "atmel,24c64";
-		reg = <0x52>;
-		pagesize = <32>;
-	};
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>;
-	status = "okay";
-};
-
-&mac1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac1_pins_a>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_a>;
-
-	hog_pins_a: hog-gpios@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_D00__GPIO_0_0
-			MX28_PAD_GPMI_D03__GPIO_0_3
-			MX28_PAD_GPMI_D06__GPIO_0_6
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_4bit_pins_a>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&ssp2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx28-spi";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>;
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "everspin,mr25h256", "mr25h256";
-		spi-max-frequency = <40000000>;
-		reg = <0>;
-	};
-};
-
-&usb0 {
-	vbus-supply = <&reg_usb0_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins_b>;
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
deleted file mode 100644
index ae6ed5c41be32..0000000000000
--- a/arch/arm/boot/dts/imx28-ts4600.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2016 Savoir-Faire Linux
- * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-#include "dt-bindings/gpio/gpio.h"
-
-/ {
-
-	model = "Technologic Systems i.MX28 TS-4600";
-	compatible = "technologic,imx28-ts4600", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x10000000>;   /* 256MB */
-	};
-
-	reg_vddio_sd0: regulator-vddio-sd0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		gpio = <&gpio3 28 GPIO_ACTIVE_LOW>;
-	};
-
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_pins_a>;
-	status = "okay";
-};
-
-&pinctrl {
-	en_sd_pwr: en-sd-pwr@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_PWM3__GPIO_3_28
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm2_pins_a>;
-	status = "okay";
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_4bit_pins_a
-		     &mmc0_sck_cfg
-		     &en_sd_pwr>;
-	broken-cd;
-	bus-width = <4>;
-	vmmc-supply = <&reg_vddio_sd0>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
deleted file mode 100644
index ffe58c7093e1c..0000000000000
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ /dev/null
@@ -1,677 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
- * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Ka-Ro electronics TX28 module";
-	compatible = "karo,tx28", "fsl,imx28";
-
-	aliases {
-		can0 = &can0;
-		can1 = &can1;
-		display = &display0;
-		ds1339 = &ds1339;
-		gpio5 = &gpio5;
-		lcdif = &lcdif;
-		lcdif_23bit_pins = &tx28_lcdif_23bit_pins;
-		lcdif_24bit_pins = &lcdif_24bit_pins_a;
-		reg_can_xcvr = &reg_can_xcvr;
-		spi_gpio = &spi_gpio;
-		spi_mxs = &ssp3;
-		stk5led = &user_led;
-		usbotg = &usb0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0>; /* will be filled in by U-Boot */
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-	};
-
-	reg_usb0_vbus: regulator-usb0-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb0_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb1_vbus: regulator-usb1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_can_xcvr: regulator-can-xcvr {
-		compatible = "regulator-fixed";
-		regulator-name = "CAN XCVR";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
-	};
-
-	reg_lcd: regulator-lcd-power {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lcd_reset: regulator-lcd-reset {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD RESET";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <300000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	sound {
-		compatible = "fsl,imx28-tx28-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-tx28-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led: user {
-			label = "Heartbeat";
-			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 500000>;
-		/*
-		 * a silly way to create a 1:1 relationship between the
-		 * PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	matrix_keypad: matrix-keypad {
-		compatible = "gpio-matrix-keypad";
-		col-gpios = <
-			&gpio5 0 GPIO_ACTIVE_HIGH
-			&gpio5 1 GPIO_ACTIVE_HIGH
-			&gpio5 2 GPIO_ACTIVE_HIGH
-			&gpio5 3 GPIO_ACTIVE_HIGH
-		>;
-		row-gpios = <
-			&gpio5 4 GPIO_ACTIVE_HIGH
-			&gpio5 5 GPIO_ACTIVE_HIGH
-			&gpio5 6 GPIO_ACTIVE_HIGH
-			&gpio5 7 GPIO_ACTIVE_HIGH
-		>;
-		/* sample keymap */
-		linux,keymap = <
-			0x00000074 /* row 0, col 0, KEY_POWER */
-			0x00010052 /* row 0, col 1, KEY_KP0 */
-			0x0002004f /* row 0, col 2, KEY_KP1 */
-			0x00030050 /* row 0, col 3, KEY_KP2 */
-			0x01000051 /* row 1, col 0, KEY_KP3 */
-			0x0101004b /* row 1, col 1, KEY_KP4 */
-			0x0102004c /* row 1, col 2, KEY_KP5 */
-			0x0103004d /* row 1, col 3, KEY_KP6 */
-			0x02000047 /* row 2, col 0, KEY_KP7 */
-			0x02010048 /* row 2, col 1, KEY_KP8 */
-			0x02020049 /* row 2, col 2, KEY_KP9 */
-		>;
-		gpio-activelow;
-		wakeup-source;
-		debounce-delay-ms = <100>;
-		col-scan-delay-us = <5000>;
-		linux,no-autorepeat;
-	};
-
-	spi_gpio: spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tx28_spi_gpio_pins>;
-
-		gpio-sck = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio2 25 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <3>;
-		cs-gpios = <
-			&gpio2 27 GPIO_ACTIVE_LOW
-			&gpio3 8 GPIO_ACTIVE_LOW
-			&gpio3 9 GPIO_ACTIVE_LOW
-		>;
-		/* enable this and disable ssp3 below, if you need full duplex SPI transfer */
-		status = "disabled";
-	};
-};
-
-/* 2nd TX-Std UART - (A)UART1  */
-&auart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart1_pins_a>;
-	status = "okay";
-};
-
-/* 3rd TX-Std UART - (A)UART3  */
-&auart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart3_pins_a>;
-	status = "okay";
-};
-
-&can0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&can0_pins_a>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&can1_pins_a>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&digctl {
-	status = "okay";
-};
-
-/* 1st TX-Std UART - (D)UART */
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_4pins_a>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	sgtl5000: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&mclk>;
-	};
-
-	gpio5: pca953x@20 {
-		compatible = "nxp,pca9554";
-		reg = <0x20>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tx28_pca9554_pins>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <28 IRQ_TYPE_NONE>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tx28_edt_ft5x06_pins>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-
-	touchscreen: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tx28_tsc2007_pins>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
-		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
-		ti,x-plate-ohms = /bits/ 16 <660>;
-	};
-
-	ds1339: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-		trickle-resistor-ohms = <250>;
-		trickle-diode-disable;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>;
-	lcd-supply = <&reg_lcd>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-		display-timings {
-			native-mode = <&timing5>;
-			timing0: timing0 {
-				panel-name = "VGA";
-				clock-frequency = <25175000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing1: timing1 {
-				panel-name = "ETV570";
-				clock-frequency = <25175000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing2: timing2 {
-				panel-name = "ET0350";
-				clock-frequency = <6500000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing3: timing3 {
-				panel-name = "ET0430";
-				clock-frequency = <9000000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing4: timing4 {
-				panel-name = "ET0500", "ET0700";
-				clock-frequency = <33260000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing5: timing5 {
-				panel-name = "ETQ570";
-				clock-frequency = <6400000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&lradc {
-	fsl,lradc-touchscreen-wires = <4>;
-	status = "okay";
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default", "gpio_mode";
-	pinctrl-0 = <&mac0_pins_a>;
-	pinctrl-1 = <&tx28_mac0_pins_gpio>;
-	status = "okay";
-};
-
-&mac1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac1_pins_a>;
-	/* not enabled by default */
-};
-
-&mxs_rtc {
-	status = "okay";
-};
-
-&ocotp {
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_a>;
-
-	hog_pins_a: hog@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
-			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
-			MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D00__GPIO_1_0
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_lcdif_23bit_pins: tx28-lcdif-23bit@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
-			MX28_PAD_LCD_D01__LCD_D1
-			MX28_PAD_LCD_D02__LCD_D2
-			MX28_PAD_LCD_D03__LCD_D3
-			MX28_PAD_LCD_D04__LCD_D4
-			MX28_PAD_LCD_D05__LCD_D5
-			MX28_PAD_LCD_D06__LCD_D6
-			MX28_PAD_LCD_D07__LCD_D7
-			MX28_PAD_LCD_D08__LCD_D8
-			MX28_PAD_LCD_D09__LCD_D9
-			MX28_PAD_LCD_D10__LCD_D10
-			MX28_PAD_LCD_D11__LCD_D11
-			MX28_PAD_LCD_D12__LCD_D12
-			MX28_PAD_LCD_D13__LCD_D13
-			MX28_PAD_LCD_D14__LCD_D14
-			MX28_PAD_LCD_D15__LCD_D15
-			MX28_PAD_LCD_D16__LCD_D16
-			MX28_PAD_LCD_D17__LCD_D17
-			MX28_PAD_LCD_D18__LCD_D18
-			MX28_PAD_LCD_D19__LCD_D19
-			MX28_PAD_LCD_D20__LCD_D20
-			MX28_PAD_LCD_D21__LCD_D21
-			MX28_PAD_LCD_D22__LCD_D22
-			MX28_PAD_LCD_D23__LCD_D23
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
-			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_ENET0_MDC__GPIO_4_0
-			MX28_PAD_ENET0_MDIO__GPIO_4_1
-			MX28_PAD_ENET0_RX_EN__GPIO_4_2
-			MX28_PAD_ENET0_RXD0__GPIO_4_3
-			MX28_PAD_ENET0_RXD1__GPIO_4_4
-			MX28_PAD_ENET0_TX_EN__GPIO_4_6
-			MX28_PAD_ENET0_TXD0__GPIO_4_7
-			MX28_PAD_ENET0_TXD1__GPIO_4_8
-			MX28_PAD_ENET_CLK__GPIO_4_16
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_pca9554_pins: tx28-pca9554-pins@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_PWM3__GPIO_3_28
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_spi_gpio_pins: spi-gpiogrp@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_AUART2_RX__GPIO_3_8
-			MX28_PAD_AUART2_TX__GPIO_3_9
-			MX28_PAD_SSP3_SCK__GPIO_2_24
-			MX28_PAD_SSP3_MOSI__GPIO_2_25
-			MX28_PAD_SSP3_MISO__GPIO_2_26
-			MX28_PAD_SSP3_SS0__GPIO_2_27
-		>;
-		fsl,drive-strength = <MXS_DRIVE_8mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_tsc2007_pins: tx28-tsc2007-pins@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-
-	tx28_usbphy0_pins: tx28-usbphy0-pins@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
-			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_12mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_usbphy1_pins: tx28-usbphy1-pins@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
-			MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_12mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&saif0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif0_pins_b>;
-	fsl,saif-master;
-	status = "okay";
-};
-
-&saif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif1_pins_a>;
-	status = "okay";
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default", "special";
-	pinctrl-0 = <&mmc0_4bit_pins_a
-		     &mmc0_cd_cfg
-		     &mmc0_sck_cfg>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&ssp3 {
-	compatible = "fsl,imx28-spi";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi3_pins_a>;
-	clock-frequency = <57600000>;
-	status = "okay";
-};
-
-&usb0 {
-	vbus-supply = <&reg_usb0_vbus>;
-	disable-over-current;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&tx28_usbphy0_pins>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbphy1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&tx28_usbphy1_pins>;
-	phy_type = "utmi";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-xea.dts b/arch/arm/boot/dts/imx28-xea.dts
deleted file mode 100644
index a400c108f66a2..0000000000000
--- a/arch/arm/boot/dts/imx28-xea.dts
+++ /dev/null
@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2021
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-#include "imx28-lwe.dtsi"
-
-/ {
-	compatible = "lwn,imx28-xea", "fsl,imx28";
-};
-
-&can0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&can1_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_b>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_a &hog_pins_tiva>;
-
-	hog_pins_a: hog@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_D00__GPIO_0_0
-			MX28_PAD_GPMI_D02__GPIO_0_2
-			MX28_PAD_GPMI_D05__GPIO_0_5
-			MX28_PAD_GPMI_CE1N__GPIO_0_17
-			MX28_PAD_GPMI_RDY0__GPIO_0_20
-			MX28_PAD_GPMI_RDY1__GPIO_0_21
-			MX28_PAD_GPMI_RDY2__GPIO_0_22
-			MX28_PAD_GPMI_RDN__GPIO_0_24
-			MX28_PAD_GPMI_CLE__GPIO_0_27
-			MX28_PAD_LCD_VSYNC__GPIO_1_28
-			MX28_PAD_SSP1_SCK__GPIO_2_12
-			MX28_PAD_SSP1_CMD__GPIO_2_13
-			MX28_PAD_SSP2_SS1__GPIO_2_20
-			MX28_PAD_SSP2_SS2__GPIO_2_21
-			MX28_PAD_LCD_D00__GPIO_1_0
-			MX28_PAD_LCD_D01__GPIO_1_1
-			MX28_PAD_LCD_D02__GPIO_1_2
-			MX28_PAD_LCD_D03__GPIO_1_3
-			MX28_PAD_LCD_D04__GPIO_1_4
-			MX28_PAD_LCD_D05__GPIO_1_5
-			MX28_PAD_LCD_D06__GPIO_1_6
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	hog_pins_tiva: hog@1 {
-		reg = <1>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_RDY3__GPIO_0_23
-			MX28_PAD_GPMI_WRN__GPIO_0_25
-		>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	hog_pins_coding: hog@2 {
-		reg = <2>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_D01__GPIO_0_1
-			MX28_PAD_GPMI_D03__GPIO_0_3
-			MX28_PAD_GPMI_D04__GPIO_0_4
-			MX28_PAD_GPMI_D06__GPIO_0_6
-			MX28_PAD_GPMI_D07__GPIO_0_7
-		>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&reg_fec_3v3 {
-	gpio = <&gpio0 0 0>;
-};
-
-&reg_usb_5v {
-	gpio = <&gpio0 2 0>;
-};
-
-&spi2_pins_a {
-	fsl,pinmux-ids = <
-		MX28_PAD_SSP2_SCK__SSP2_SCK
-		MX28_PAD_SSP2_MOSI__SSP2_CMD
-		MX28_PAD_SSP2_MISO__SSP2_D0
-		MX28_PAD_SSP2_SS0__GPIO_2_19
-	>;
-};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
deleted file mode 100644
index a8d3c3113e0f6..0000000000000
--- a/arch/arm/boot/dts/imx28.dtsi
+++ /dev/null
@@ -1,1334 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28-pinfunc.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&icoll>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		ethernet0 = &mac0;
-		ethernet1 = &mac1;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
-		gpio4 = &gpio4;
-		saif0 = &saif0;
-		saif1 = &saif1;
-		serial0 = &auart0;
-		serial1 = &auart1;
-		serial2 = &auart2;
-		serial3 = &auart3;
-		serial4 = &auart4;
-		spi0 = &ssp1;
-		spi1 = &ssp2;
-		usbphy0 = &usbphy0;
-		usbphy1 = &usbphy1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	apb@80000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80000000 0x80000>;
-		ranges;
-
-		apbh@80000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x3c900>;
-			ranges;
-
-			icoll: interrupt-controller@80000000 {
-				compatible = "fsl,imx28-icoll", "fsl,icoll";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x80000000 0x2000>;
-			};
-
-			hsadc: hsadc@80002000 {
-				reg = <0x80002000 0x2000>;
-				interrupts = <13>;
-				dmas = <&dma_apbh 12>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			dma_apbh: dma-apbh@80004000 {
-				compatible = "fsl,imx28-dma-apbh";
-				reg = <0x80004000 0x2000>;
-				interrupts = <82 83 84 85
-					      88 88 88 88
-					      88 88 88 88
-					      87 86 0 0>;
-				#dma-cells = <1>;
-				dma-channels = <16>;
-				clocks = <&clks 25>;
-			};
-
-			perfmon: perfmon@80006000 {
-				reg = <0x80006000 0x800>;
-				interrupts = <27>;
-				status = "disabled";
-			};
-
-			gpmi: nand-controller@8000c000 {
-				compatible = "fsl,imx28-gpmi-nand";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
-				reg-names = "gpmi-nand", "bch";
-				interrupts = <41>;
-				interrupt-names = "bch";
-				clocks = <&clks 50>;
-				clock-names = "gpmi_io";
-				assigned-clocks = <&clks 13>;
-				assigned-clock-parents = <&clks 10>;
-				dmas = <&dma_apbh 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp0: spi@80010000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x80010000 0x2000>;
-				interrupts = <96>;
-				clocks = <&clks 46>;
-				dmas = <&dma_apbh 0>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp1: spi@80012000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x80012000 0x2000>;
-				interrupts = <97>;
-				clocks = <&clks 47>;
-				dmas = <&dma_apbh 1>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x80014000 0x2000>;
-				interrupts = <98>;
-				clocks = <&clks 48>;
-				dmas = <&dma_apbh 2>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp3: spi@80016000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x80016000 0x2000>;
-				interrupts = <99>;
-				clocks = <&clks 49>;
-				dmas = <&dma_apbh 3>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			pinctrl: pinctrl@80018000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-pinctrl", "simple-bus";
-				reg = <0x80018000 0x2000>;
-
-				gpio0: gpio@0 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					reg = <0>;
-					interrupts = <127>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio1: gpio@1 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					reg = <1>;
-					interrupts = <126>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio2: gpio@2 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					reg = <2>;
-					interrupts = <125>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio3: gpio@3 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					reg = <3>;
-					interrupts = <124>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio4: gpio@4 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					reg = <4>;
-					interrupts = <123>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				duart_pins_a: duart@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM0__DUART_RX
-						MX28_PAD_PWM1__DUART_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				duart_pins_b: duart@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_CTS__DUART_RX
-						MX28_PAD_AUART0_RTS__DUART_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				duart_4pins_a: duart-4pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_CTS__DUART_RX
-						MX28_PAD_AUART0_RTS__DUART_TX
-						MX28_PAD_AUART0_RX__DUART_CTS
-						MX28_PAD_AUART0_TX__DUART_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_a: gpmi-nand@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D00__GPMI_D0
-						MX28_PAD_GPMI_D01__GPMI_D1
-						MX28_PAD_GPMI_D02__GPMI_D2
-						MX28_PAD_GPMI_D03__GPMI_D3
-						MX28_PAD_GPMI_D04__GPMI_D4
-						MX28_PAD_GPMI_D05__GPMI_D5
-						MX28_PAD_GPMI_D06__GPMI_D6
-						MX28_PAD_GPMI_D07__GPMI_D7
-						MX28_PAD_GPMI_CE0N__GPMI_CE0N
-						MX28_PAD_GPMI_RDY0__GPMI_READY0
-						MX28_PAD_GPMI_RDN__GPMI_RDN
-						MX28_PAD_GPMI_WRN__GPMI_WRN
-						MX28_PAD_GPMI_ALE__GPMI_ALE
-						MX28_PAD_GPMI_CLE__GPMI_CLE
-						MX28_PAD_GPMI_RESETN__GPMI_RESETN
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_status_cfg: gpmi-status-cfg@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDN__GPMI_RDN
-						MX28_PAD_GPMI_WRN__GPMI_WRN
-						MX28_PAD_GPMI_RESETN__GPMI_RESETN
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-				};
-
-				auart0_pins_a: auart0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RX__AUART0_RX
-						MX28_PAD_AUART0_TX__AUART0_TX
-						MX28_PAD_AUART0_CTS__AUART0_CTS
-						MX28_PAD_AUART0_RTS__AUART0_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart0_2pins_a: auart0-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RX__AUART0_RX
-						MX28_PAD_AUART0_TX__AUART0_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart1_pins_a: auart1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__AUART1_RX
-						MX28_PAD_AUART1_TX__AUART1_TX
-						MX28_PAD_AUART1_CTS__AUART1_CTS
-						MX28_PAD_AUART1_RTS__AUART1_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart1_2pins_a: auart1-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__AUART1_RX
-						MX28_PAD_AUART1_TX__AUART1_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart2_2pins_a: auart2-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__AUART2_RX
-						MX28_PAD_SSP2_MOSI__AUART2_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart2_2pins_b: auart2-2pins@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART2_RX__AUART2_RX
-						MX28_PAD_AUART2_TX__AUART2_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart2_pins_a: auart2-pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART2_RX__AUART2_RX
-						MX28_PAD_AUART2_TX__AUART2_TX
-						MX28_PAD_AUART2_CTS__AUART2_CTS
-						MX28_PAD_AUART2_RTS__AUART2_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart3_pins_a: auart3@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART3_RX__AUART3_RX
-						MX28_PAD_AUART3_TX__AUART3_TX
-						MX28_PAD_AUART3_CTS__AUART3_CTS
-						MX28_PAD_AUART3_RTS__AUART3_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart3_2pins_a: auart3-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_MISO__AUART3_RX
-						MX28_PAD_SSP2_SS0__AUART3_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart3_2pins_b: auart3-2pins@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART3_RX__AUART3_RX
-						MX28_PAD_AUART3_TX__AUART3_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart4_2pins_a: auart4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP3_SCK__AUART4_TX
-						MX28_PAD_SSP3_MOSI__AUART4_RX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart4_2pins_b: auart4@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_CTS__AUART4_RX
-						MX28_PAD_AUART0_RTS__AUART4_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_a: mac0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_ENET0_MDC__ENET0_MDC
-						MX28_PAD_ENET0_MDIO__ENET0_MDIO
-						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
-						MX28_PAD_ENET0_RXD0__ENET0_RXD0
-						MX28_PAD_ENET0_RXD1__ENET0_RXD1
-						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
-						MX28_PAD_ENET0_TXD0__ENET0_TXD0
-						MX28_PAD_ENET0_TXD1__ENET0_TXD1
-						MX28_PAD_ENET_CLK__CLKCTRL_ENET
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mac0_pins_b: mac0@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_ENET0_MDC__ENET0_MDC
-						MX28_PAD_ENET0_MDIO__ENET0_MDIO
-						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
-						MX28_PAD_ENET0_RXD0__ENET0_RXD0
-						MX28_PAD_ENET0_RXD1__ENET0_RXD1
-						MX28_PAD_ENET0_RXD2__ENET0_RXD2
-						MX28_PAD_ENET0_RXD3__ENET0_RXD3
-						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
-						MX28_PAD_ENET0_TXD0__ENET0_TXD0
-						MX28_PAD_ENET0_TXD1__ENET0_TXD1
-						MX28_PAD_ENET0_TXD2__ENET0_TXD2
-						MX28_PAD_ENET0_TXD3__ENET0_TXD3
-						MX28_PAD_ENET_CLK__CLKCTRL_ENET
-						MX28_PAD_ENET0_COL__ENET0_COL
-						MX28_PAD_ENET0_CRS__ENET0_CRS
-						MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
-						MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
-						>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mac1_pins_a: mac1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_ENET0_CRS__ENET1_RX_EN
-						MX28_PAD_ENET0_RXD2__ENET1_RXD0
-						MX28_PAD_ENET0_RXD3__ENET1_RXD1
-						MX28_PAD_ENET0_COL__ENET1_TX_EN
-						MX28_PAD_ENET0_TXD2__ENET1_TXD0
-						MX28_PAD_ENET0_TXD3__ENET1_TXD1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_8bit_pins_a: mmc0-8bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA0__SSP0_D0
-						MX28_PAD_SSP0_DATA1__SSP0_D1
-						MX28_PAD_SSP0_DATA2__SSP0_D2
-						MX28_PAD_SSP0_DATA3__SSP0_D3
-						MX28_PAD_SSP0_DATA4__SSP0_D4
-						MX28_PAD_SSP0_DATA5__SSP0_D5
-						MX28_PAD_SSP0_DATA6__SSP0_D6
-						MX28_PAD_SSP0_DATA7__SSP0_D7
-						MX28_PAD_SSP0_CMD__SSP0_CMD
-						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
-						MX28_PAD_SSP0_SCK__SSP0_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_4bit_pins_a: mmc0-4bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA0__SSP0_D0
-						MX28_PAD_SSP0_DATA1__SSP0_D1
-						MX28_PAD_SSP0_DATA2__SSP0_D2
-						MX28_PAD_SSP0_DATA3__SSP0_D3
-						MX28_PAD_SSP0_CMD__SSP0_CMD
-						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
-						MX28_PAD_SSP0_SCK__SSP0_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_cd_cfg: mmc0-cd-cfg@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
-					>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc0_sck_cfg: mmc0-sck-cfg@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_SCK__SSP0_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc1_4bit_pins_a: mmc1-4bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D00__SSP1_D0
-						MX28_PAD_GPMI_D01__SSP1_D1
-						MX28_PAD_GPMI_D02__SSP1_D2
-						MX28_PAD_GPMI_D03__SSP1_D3
-						MX28_PAD_GPMI_RDY1__SSP1_CMD
-						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
-						MX28_PAD_GPMI_WRN__SSP1_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc1_cd_cfg: mmc1-cd-cfg@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
-					>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc1_sck_cfg: mmc1-sck-cfg@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_WRN__SSP1_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-
-				mmc2_4bit_pins_a: mmc2-4bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA4__SSP2_D0
-						MX28_PAD_SSP1_SCK__SSP2_D1
-						MX28_PAD_SSP1_CMD__SSP2_D2
-						MX28_PAD_SSP0_DATA5__SSP2_D3
-						MX28_PAD_SSP0_DATA6__SSP2_CMD
-						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc2_4bit_pins_b: mmc2-4bit@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__SSP2_SCK
-						MX28_PAD_SSP2_MOSI__SSP2_CMD
-						MX28_PAD_SSP2_MISO__SSP2_D0
-						MX28_PAD_SSP2_SS0__SSP2_D3
-						MX28_PAD_SSP2_SS1__SSP2_D1
-						MX28_PAD_SSP2_SS2__SSP2_D2
-						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc2_cd_cfg: mmc2-cd-cfg@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
-					>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				i2c0_pins_a: i2c0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_I2C0_SCL__I2C0_SCL
-						MX28_PAD_I2C0_SDA__I2C0_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				i2c0_pins_b: i2c0@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RX__I2C0_SCL
-						MX28_PAD_AUART0_TX__I2C0_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				i2c1_pins_a: i2c1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM0__I2C1_SCL
-						MX28_PAD_PWM1__I2C1_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				i2c1_pins_b: i2c1@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART2_CTS__I2C1_SCL
-						MX28_PAD_AUART2_RTS__I2C1_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				saif0_pins_a: saif0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
-						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
-						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
-						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				saif0_pins_b: saif0@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
-						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
-						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				saif1_pins_a: saif1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				pwm0_pins_a: pwm0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM0__PWM_0
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm2_pins_a: pwm2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM2__PWM_2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm3_pins_a: pwm3@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__PWM_3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm3_pins_b: pwm3@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__PWM_3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm4_pins_a: pwm4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM4__PWM_4
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_24bit_pins_a: lcdif-24bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-						MX28_PAD_LCD_D18__LCD_D18
-						MX28_PAD_LCD_D19__LCD_D19
-						MX28_PAD_LCD_D20__LCD_D20
-						MX28_PAD_LCD_D21__LCD_D21
-						MX28_PAD_LCD_D22__LCD_D22
-						MX28_PAD_LCD_D23__LCD_D23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_18bit_pins_a: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_16bit_pins_a: lcdif-16bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_sync_pins_a: lcdif-sync@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				can0_pins_a: can0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDY2__CAN0_TX
-						MX28_PAD_GPMI_RDY3__CAN0_RX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				can1_pins_a: can1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE2N__CAN1_TX
-						MX28_PAD_GPMI_CE3N__CAN1_RX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				spi2_pins_a: spi2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__SSP2_SCK
-						MX28_PAD_SSP2_MOSI__SSP2_CMD
-						MX28_PAD_SSP2_MISO__SSP2_D0
-						MX28_PAD_SSP2_SS0__SSP2_D3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi3_pins_a: spi3@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART2_RX__SSP3_D4
-						MX28_PAD_AUART2_TX__SSP3_D5
-						MX28_PAD_SSP3_SCK__SSP3_SCK
-						MX28_PAD_SSP3_MOSI__SSP3_CMD
-						MX28_PAD_SSP3_MISO__SSP3_D0
-						MX28_PAD_SSP3_SS0__SSP3_D3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				spi3_pins_b: spi3@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP3_SCK__SSP3_SCK
-						MX28_PAD_SSP3_MOSI__SSP3_CMD
-						MX28_PAD_SSP3_MISO__SSP3_D0
-						MX28_PAD_SSP3_SS0__SSP3_D3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				usb0_pins_a: usb0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_pins_b: usb0@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb1_pins_a: usb1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb1_pins_b: usb1@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM2__USB1_OVERCURRENT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_id_pins_a: usb0id@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RTS__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				usb0_id_pins_b: usb0id1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM2__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-			};
-
-			digctl: digctl@8001c000 {
-				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
-				reg = <0x8001c000 0x2000>;
-				interrupts = <89>;
-				status = "disabled";
-			};
-
-			etm: etm@80022000 {
-				reg = <0x80022000 0x2000>;
-				status = "disabled";
-			};
-
-			dma_apbx: dma-apbx@80024000 {
-				compatible = "fsl,imx28-dma-apbx";
-				reg = <0x80024000 0x2000>;
-				interrupts = <78 79 66 0
-					      80 81 68 69
-					      70 71 72 73
-					      74 75 76 77>;
-				#dma-cells = <1>;
-				dma-channels = <16>;
-				clocks = <&clks 26>;
-			};
-
-			dcp: crypto@80028000 {
-				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
-				reg = <0x80028000 0x2000>;
-				interrupts = <52 53 54>;
-				status = "okay";
-			};
-
-			pxp: pxp@8002a000 {
-				reg = <0x8002a000 0x2000>;
-				interrupts = <39>;
-				status = "disabled";
-			};
-
-			ocotp: efuse@8002c000 {
-				compatible = "fsl,imx28-ocotp", "fsl,ocotp";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x8002c000 0x2000>;
-				clocks = <&clks 25>;
-			};
-
-			axi-ahb@8002e000 {
-				reg = <0x8002e000 0x2000>;
-				status = "disabled";
-			};
-
-			lcdif: lcdif@80030000 {
-				compatible = "fsl,imx28-lcdif";
-				reg = <0x80030000 0x2000>;
-				interrupts = <38>;
-				clocks = <&clks 55>;
-				dmas = <&dma_apbh 13>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			can0: can@80032000 {
-				compatible = "fsl,imx28-flexcan";
-				reg = <0x80032000 0x2000>;
-				interrupts = <8>;
-				clocks = <&clks 58>, <&clks 58>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			can1: can@80034000 {
-				compatible = "fsl,imx28-flexcan";
-				reg = <0x80034000 0x2000>;
-				interrupts = <9>;
-				clocks = <&clks 59>, <&clks 59>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			simdbg: simdbg@8003c000 {
-				reg = <0x8003c000 0x200>;
-				status = "disabled";
-			};
-
-			simgpmisel: simgpmisel@8003c200 {
-				reg = <0x8003c200 0x100>;
-				status = "disabled";
-			};
-
-			simsspsel: simsspsel@8003c300 {
-				reg = <0x8003c300 0x100>;
-				status = "disabled";
-			};
-
-			simmemsel: simmemsel@8003c400 {
-				reg = <0x8003c400 0x100>;
-				status = "disabled";
-			};
-
-			gpiomon: gpiomon@8003c500 {
-				reg = <0x8003c500 0x100>;
-				status = "disabled";
-			};
-
-			simenet: simenet@8003c700 {
-				reg = <0x8003c700 0x100>;
-				status = "disabled";
-			};
-
-			armjtag: armjtag@8003c800 {
-				reg = <0x8003c800 0x100>;
-				status = "disabled";
-			};
-		};
-
-		apbx@80040000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80040000 0x40000>;
-			ranges;
-
-			clks: clkctrl@80040000 {
-				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
-				reg = <0x80040000 0x2000>;
-				#clock-cells = <1>;
-			};
-
-			saif0: saif@80042000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx28-saif";
-				reg = <0x80042000 0x2000>;
-				interrupts = <59>;
-				#clock-cells = <0>;
-				clocks = <&clks 53>;
-				dmas = <&dma_apbx 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			power: power@80044000 {
-				reg = <0x80044000 0x2000>;
-				status = "disabled";
-			};
-
-			saif1: saif@80046000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx28-saif";
-				reg = <0x80046000 0x2000>;
-				interrupts = <58>;
-				clocks = <&clks 54>;
-				dmas = <&dma_apbx 5>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			lradc: lradc@80050000 {
-				compatible = "fsl,imx28-lradc";
-				reg = <0x80050000 0x2000>;
-				interrupts = <10 14 15 16 17 18 19
-						20 21 22 23 24 25>;
-				status = "disabled";
-				clocks = <&clks 41>;
-				#io-channel-cells = <1>;
-			};
-
-			spdif: spdif@80054000 {
-				reg = <0x80054000 0x2000>;
-				interrupts = <45>;
-				dmas = <&dma_apbx 2>;
-				dma-names = "tx";
-				status = "disabled";
-			};
-
-			mxs_rtc: rtc@80056000 {
-				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
-				reg = <0x80056000 0x2000>;
-				interrupts = <29>;
-			};
-
-			i2c0: i2c@80058000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-i2c";
-				reg = <0x80058000 0x2000>;
-				interrupts = <111>;
-				clock-frequency = <100000>;
-				dmas = <&dma_apbx 6>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			i2c1: i2c@8005a000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-i2c";
-				reg = <0x8005a000 0x2000>;
-				interrupts = <110>;
-				clock-frequency = <100000>;
-				dmas = <&dma_apbx 7>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			pwm: pwm@80064000 {
-				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
-				reg = <0x80064000 0x2000>;
-				clocks = <&clks 44>;
-				#pwm-cells = <2>;
-				fsl,pwm-number = <8>;
-				status = "disabled";
-			};
-
-			timer: timrot@80068000 {
-				compatible = "fsl,imx28-timrot", "fsl,timrot";
-				reg = <0x80068000 0x2000>;
-				interrupts = <48 49 50 51>;
-				clocks = <&clks 26>;
-			};
-
-			auart0: serial@8006a000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x8006a000 0x2000>;
-				interrupts = <112>;
-				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			auart1: serial@8006c000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x8006c000 0x2000>;
-				interrupts = <113>;
-				dmas = <&dma_apbx 10>, <&dma_apbx 11>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			auart2: serial@8006e000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x8006e000 0x2000>;
-				interrupts = <114>;
-				dmas = <&dma_apbx 12>, <&dma_apbx 13>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			auart3: serial@80070000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x80070000 0x2000>;
-				interrupts = <115>;
-				dmas = <&dma_apbx 14>, <&dma_apbx 15>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			auart4: serial@80072000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x80072000 0x2000>;
-				interrupts = <116>;
-				dmas = <&dma_apbx 0>, <&dma_apbx 1>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			duart: serial@80074000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x80074000 0x1000>;
-				interrupts = <47>;
-				clocks = <&clks 45>, <&clks 26>;
-				clock-names = "uart", "apb_pclk";
-				status = "disabled";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
-				reg = <0x8007c000 0x2000>;
-				clocks = <&clks 62>;
-				status = "disabled";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
-				reg = <0x8007e000 0x2000>;
-				clocks = <&clks 63>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80080000 0x80000>;
-		ranges;
-
-		usb0: usb@80080000 {
-			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
-			reg = <0x80080000 0x10000>;
-			interrupts = <93>;
-			clocks = <&clks 60>;
-			fsl,usbphy = <&usbphy0>;
-			status = "disabled";
-		};
-
-		usb1: usb@80090000 {
-			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
-			reg = <0x80090000 0x10000>;
-			interrupts = <92>;
-			clocks = <&clks 61>;
-			fsl,usbphy = <&usbphy1>;
-			dr_mode = "host";
-			status = "disabled";
-		};
-
-		dflpt: dflpt@800c0000 {
-			reg = <0x800c0000 0x10000>;
-			status = "disabled";
-		};
-
-		mac0: ethernet@800f0000 {
-			compatible = "fsl,imx28-fec";
-			reg = <0x800f0000 0x4000>;
-			interrupts = <101>;
-			clocks = <&clks 57>, <&clks 57>, <&clks 64>;
-			clock-names = "ipg", "ahb", "enet_out";
-			status = "disabled";
-		};
-
-		mac1: ethernet@800f4000 {
-			compatible = "fsl,imx28-fec";
-			reg = <0x800f4000 0x4000>;
-			interrupts = <102>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
-			status = "disabled";
-		};
-
-		eth_switch: switch@800f8000 {
-			reg = <0x800f8000 0x8000>;
-			status = "disabled";
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&lradc 8>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts
deleted file mode 100644
index d87eee3f9b3cd..0000000000000
--- a/arch/arm/boot/dts/imx31-bug.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- */
-
-/dts-v1/;
-#include "imx31.dtsi"
-
-/ {
-	model = "Buglabs i.MX31 Bug 1.x";
-	compatible = "buglabs,imx31-bug", "fsl,imx31";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128M */
-	};
-};
-
-&uart5 {
-	uart-has-rtscts;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx31-lite.dts b/arch/arm/boot/dts/imx31-lite.dts
deleted file mode 100644
index d17abdfb6330c..0000000000000
--- a/arch/arm/boot/dts/imx31-lite.dts
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
-
-/dts-v1/;
-
-#include "imx31.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "LogicPD i.MX31 Lite";
-	compatible = "logicpd,imx31-lite", "fsl,imx31";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 {
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		};
-
-		led1 {
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&ata {
-	status = "okay";
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&sdhci1 {
-	bus-width = <4>;
-	cd-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&spi2 {
-	status = "okay";
-
-	pmic@0 {
-		compatible = "fsl,mc13783";
-		reg = <0>;
-		spi-cs-high;
-		spi-max-frequency = <1000000>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-
-		fsl,mc13xxx-uses-adc;
-		fsl,mc13xxx-uses-rtc;
-
-		regulators {
-			sw1a {		/* QVCC */
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw1b {		/* QVCC */
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw2a {		/* 1.8V_DDR, NVCC2, NVCC21 and NVCC22 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw2b {		/* NVCC10 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			violo {		/* NVCC1 and NVCC7 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			viohi {		/* VIOHI */
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vaudio {	/* VAUDIO */
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-			};
-
-			vcam {		/* NVCC4 */
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			vgen {		/* NVCC5 / NVCC8 and NVCC6 / NVCC9 */
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vmmc2 {		/* NVCC3 */
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&uart1 {
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* Routed to the extension board */
-&uart2 {
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* Routed to the extension board */
-&uart3 {
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		reg = <0 0x0 0x200000>;
-		bank-width = <2>;
-		linux,mtd-name = "physmap-flash.0";
-		fsl,weim-cs-timing = <0x0000cf03 0xa0330d01 0x00220800>;
-	};
-
-	ethernet@4,0 {
-		compatible = "smsc,lan9117", "smsc,lan9115";
-		reg = <4 0x0 0x100>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
-		phy-mode = "mii";
-		reg-io-width = <2>;
-		smsc,irq-push-pull;
-		fsl,weim-cs-timing = <0x00008701 0x04000541 0x00010000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
deleted file mode 100644
index 95c05f17a6d55..0000000000000
--- a/arch/arm/boot/dts/imx31.dtsi
+++ /dev/null
@@ -1,371 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
-// Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		spi0 = &spi1;
-		spi1 = &spi2;
-		spi2 = &spi3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm1136jf-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	avic: interrupt-controller@68000000 {
-		compatible = "fsl,imx31-avic", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x68000000 0x100000>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&avic>;
-		ranges;
-
-		iram: sram@1fffc000 {
-			compatible = "mmio-sram";
-			reg = <0x1fffc000 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x1fffc000 0x4000>;
-		};
-
-		aips1: bus@43f00000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x43f00000 0x100000>;
-			ranges;
-
-			i2c1: i2c@43f80000 {
-				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
-				reg = <0x43f80000 0x4000>;
-				interrupts = <10>;
-				clocks = <&clks 33>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@43f84000 {
-				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
-				reg = <0x43f84000 0x4000>;
-				interrupts = <3>;
-				clocks = <&clks 35>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			ata: ata@43f8c000 {
-				compatible = "fsl,imx31-pata", "fsl,imx27-pata";
-				reg = <0x43f8c000 0x4000>;
-				interrupts = <15>;
-				clocks = <&clks 26>;
-				status = "disabled";
-			};
-
-			uart1: serial@43f90000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43f90000 0x4000>;
-				interrupts = <45>;
-				clocks = <&clks 10>, <&clks 30>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@43f94000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43f94000 0x4000>;
-				interrupts = <32>;
-				clocks = <&clks 10>, <&clks 31>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c2: i2c@43f98000 {
-				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
-				reg = <0x43f98000 0x4000>;
-				interrupts = <4>;
-				clocks = <&clks 34>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			spi1: spi@43fa4000 {
-				compatible = "fsl,imx31-cspi";
-				reg = <0x43fa4000 0x4000>;
-				interrupts = <14>;
-				clocks = <&clks 10>, <&clks 53>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 8 8 0>, <&sdma 9 8 0>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			kpp: kpp@43fa8000 {
-				compatible = "fsl,imx31-kpp", "fsl,imx21-kpp";
-				reg = <0x43fa8000 0x4000>;
-				interrupts = <24>;
-				clocks = <&clks 46>;
-				status = "disabled";
-			};
-
-			uart4: serial@43fb0000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43fb0000 0x4000>;
-				clocks = <&clks 10>, <&clks 49>;
-				clock-names = "ipg", "per";
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			uart5: serial@43fb4000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43fb4000 0x4000>;
-				interrupts = <47>;
-				clocks = <&clks 10>, <&clks 50>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-
-		spba-bus@50000000 {
-			compatible = "fsl,spba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x100000>;
-			ranges;
-
-			sdhci1: mmc@50004000 {
-				compatible = "fsl,imx31-mmc";
-				reg = <0x50004000 0x4000>;
-				interrupts = <9>;
-				clocks = <&clks 10>, <&clks 20>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 20 3 0>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			sdhci2: mmc@50008000 {
-				compatible = "fsl,imx31-mmc";
-				reg = <0x50008000 0x4000>;
-				interrupts = <8>;
-				clocks = <&clks 10>, <&clks 21>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 21 3 0>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			uart3: serial@5000c000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x5000c000 0x4000>;
-				interrupts = <18>;
-				clocks = <&clks 10>, <&clks 48>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			spi2: spi@50010000 {
-				compatible = "fsl,imx31-cspi";
-				reg = <0x50010000 0x4000>;
-				interrupts = <13>;
-				clocks = <&clks 10>, <&clks 54>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 6 8 0>, <&sdma 7 8 0>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			iim: efuse@5001c000 {
-				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
-				reg = <0x5001c000 0x1000>;
-				interrupts = <19>;
-				clocks = <&clks 25>;
-			};
-		};
-
-		bus@53f00000 { /* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x53f00000 0x100000>;
-			ranges;
-
-			clks: ccm@53f80000{
-				compatible = "fsl,imx31-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <31>, <53>;
-				#clock-cells = <1>;
-			};
-
-			spi3: spi@53f84000 {
-				compatible = "fsl,imx31-cspi";
-				reg = <0x53f84000 0x4000>;
-				interrupts = <17>;
-				clocks = <&clks 10>, <&clks 28>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 10 8 0>, <&sdma 11 8 0>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			gpt: timer@53f90000 {
-				compatible = "fsl,imx31-gpt";
-				reg = <0x53f90000 0x4000>;
-				interrupts = <29>;
-				clocks = <&clks 10>, <&clks 22>;
-				clock-names = "ipg", "per";
-			};
-
-			gpio3: gpio@53fa4000 {
-				compatible = "fsl,imx31-gpio";
-				reg = <0x53fa4000 0x4000>;
-				interrupts = <56>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			rng@53fb0000 {
-				compatible = "fsl,imx31-rnga";
-				reg = <0x53fb0000 0x4000>;
-				interrupts = <22>;
-				clocks = <&clks 29>;
-			};
-
-			gpio1: gpio@53fcc000 {
-				compatible = "fsl,imx31-gpio";
-				reg = <0x53fcc000 0x4000>;
-				interrupts = <52>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@53fd0000 {
-				compatible = "fsl,imx31-gpio";
-				reg = <0x53fd0000 0x4000>;
-				interrupts = <51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			sdma: dma-controller@53fd4000 {
-				compatible = "fsl,imx31-sdma";
-				reg = <0x53fd4000 0x4000>;
-				interrupts = <34>;
-				clocks = <&clks 10>, <&clks 27>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx31.bin";
-			};
-
-			rtc: rtc@53fd8000 {
-				compatible = "fsl,imx31-rtc", "fsl,imx21-rtc";
-				reg = <0x53fd8000 0x4000>;
-				interrupts = <25>;
-				clocks = <&clks 2>, <&clks 40>;
-				clock-names = "ref", "ipg";
-			};
-
-			wdog: watchdog@53fdc000 {
-				compatible = "fsl,imx31-wdt", "fsl,imx21-wdt";
-				reg = <0x53fdc000 0x4000>;
-				clocks = <&clks 41>;
-				interrupts = <55>;
-			};
-
-			pwm: pwm@53fe0000 {
-				compatible = "fsl,imx31-pwm", "fsl,imx27-pwm";
-				reg = <0x53fe0000 0x4000>;
-				interrupts = <26>;
-				clocks = <&clks 10>, <&clks 42>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-		};
-
-		emi@b8000000 { /* External Memory Interface */
-			compatible = "simple-bus";
-			reg = <0xb8000000 0x5000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nfc: nand@b8000000 {
-				compatible = "fsl,imx31-nand", "fsl,imx27-nand";
-				reg = <0xb8000000 0x1000>;
-				interrupts = <33>;
-				clocks = <&clks 9>;
-				dmas = <&sdma 30 17 0>;
-				dma-names = "rx-tx";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				status = "disabled";
-			};
-
-			weim: weim@b8002000 {
-				compatible = "fsl,imx31-weim", "fsl,imx27-weim";
-				reg = <0xb8002000 0x1000>;
-				clocks = <&clks 56>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges = <0 0 0xa0000000 0x08000000
-					  1 0 0xa8000000 0x08000000
-					  2 0 0xb0000000 0x02000000
-					  3 0 0xb2000000 0x02000000
-					  4 0 0xb4000000 0x02000000
-					  5 0 0xb6000000 0x02000000>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
deleted file mode 100644
index 17bd2a97609ab..0000000000000
--- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,cpuimx35", "fsl,imx35";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128M */
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsc2007: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		gpios = <&gpio3 2 0>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <0x2 0x8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007_1>;
-		reg = <0x48>;
-		ti,x-plate-ohms = <180>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
-				MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
-				MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX35_PAD_FEC_COL__FEC_COL		0x80000000
-				MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
-				MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
-				MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
-				MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
-				MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
-				MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
-				MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
-				MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
-				MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
-				MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
-				MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
-				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
-			>;
-		};
-
-		pinctrl_tsc2007_1: tsc2007grp-1 {
-			fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
deleted file mode 100644
index 7f4f812b08111..0000000000000
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx35-eukrea-cpuimx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bp1>;
-
-		button {
-			label = "BP1";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-			linux,input-type = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led1>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx35-eukrea-tlv320aic23";
-		ssi-controller = <&ssi1>;
-		fsl,mux-int-port = <1>;
-		fsl,mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
-				MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
-				MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
-				MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
-			>;
-		};
-
-		pinctrl_bp1: bp1grp {
-			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-				MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
-			>;
-		};
-
-		pinctrl_led1: led1grp {
-			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
-		};
-
-		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
-			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
-				MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
-				MX35_PAD_RTS2__UART2_RTS		0x1c5
-				MX35_PAD_CTS2__UART2_CTS		0x1c5
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "otg";
-	external-vbus-divider;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts
deleted file mode 100644
index ddce0a844758b..0000000000000
--- a/arch/arm/boot/dts/imx35-pdk.dts
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
-// Copyright 2014 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-#include "imx35.dtsi"
-
-/ {
-	model = "Freescale i.MX35 Product Development Kit";
-	compatible = "fsl,imx35-pdk", "fsl,imx35";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>,
-		      <0x90000000 0x8000000>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx35-pdk {
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <16>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx35-pinfunc.h b/arch/arm/boot/dts/imx35-pinfunc.h
deleted file mode 100644
index 9d6cc9564b724..0000000000000
--- a/arch/arm/boot/dts/imx35-pinfunc.h
+++ /dev/null
@@ -1,966 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DTS_IMX35_PINFUNC_H
-#define __DTS_IMX35_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX35_PAD_CAPTURE__GPT_CAPIN1				0x004 0x328 0x000 0x0 0x0
-#define MX35_PAD_CAPTURE__GPT_CMPOUT2				0x004 0x328 0x000 0x1 0x0
-#define MX35_PAD_CAPTURE__CSPI2_SS1				0x004 0x328 0x7f4 0x2 0x0
-#define MX35_PAD_CAPTURE__EPIT1_EPITO				0x004 0x328 0x000 0x3 0x0
-#define MX35_PAD_CAPTURE__CCM_CLK32K				0x004 0x328 0x7d0 0x4 0x0
-#define MX35_PAD_CAPTURE__GPIO1_4				0x004 0x328 0x850 0x5 0x0
-#define MX35_PAD_COMPARE__GPT_CMPOUT1				0x008 0x32c 0x000 0x0 0x0
-#define MX35_PAD_COMPARE__GPT_CAPIN2				0x008 0x32c 0x000 0x1 0x0
-#define MX35_PAD_COMPARE__GPT_CMPOUT3				0x008 0x32c 0x000 0x2 0x0
-#define MX35_PAD_COMPARE__EPIT2_EPITO				0x008 0x32c 0x000 0x3 0x0
-#define MX35_PAD_COMPARE__GPIO1_5				0x008 0x32c 0x854 0x5 0x0
-#define MX35_PAD_COMPARE__SDMA_EXTDMA_2				0x008 0x32c 0x000 0x7 0x0
-#define MX35_PAD_WDOG_RST__WDOG_WDOG_B				0x00c 0x330 0x000 0x0 0x0
-#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE			0x00c 0x330 0x000 0x3 0x0
-#define MX35_PAD_WDOG_RST__GPIO1_6				0x00c 0x330 0x858 0x5 0x0
-#define MX35_PAD_GPIO1_0__GPIO1_0				0x010 0x334 0x82c 0x0 0x0
-#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY				0x010 0x334 0x7d4 0x1 0x0
-#define MX35_PAD_GPIO1_0__OWIRE_LINE				0x010 0x334 0x990 0x2 0x0
-#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0				0x010 0x334 0x000 0x7 0x0
-#define MX35_PAD_GPIO1_1__GPIO1_1				0x014 0x338 0x838 0x0 0x0
-#define MX35_PAD_GPIO1_1__PWM_PWMO				0x014 0x338 0x000 0x2 0x0
-#define MX35_PAD_GPIO1_1__CSPI1_SS2				0x014 0x338 0x7d8 0x3 0x0
-#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT			0x014 0x338 0x000 0x6 0x0
-#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1				0x014 0x338 0x000 0x7 0x0
-#define MX35_PAD_GPIO2_0__GPIO2_0				0x018 0x33c 0x868 0x0 0x0
-#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK			0x018 0x33c 0x000 0x1 0x0
-#define MX35_PAD_GPIO3_0__GPIO3_0				0x01c 0x340 0x8e8 0x0 0x0
-#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK			0x01c 0x340 0x000 0x1 0x0
-#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B			0x000 0x344 0x000 0x0 0x0
-#define MX35_PAD_POR_B__CCM_POR_B				0x000 0x348 0x000 0x0 0x0
-#define MX35_PAD_CLKO__CCM_CLKO					0x020 0x34c 0x000 0x0 0x0
-#define MX35_PAD_CLKO__GPIO1_8					0x020 0x34c 0x860 0x5 0x0
-#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0			0x000 0x350 0x000 0x0 0x0
-#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1			0x000 0x354 0x000 0x0 0x0
-#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0			0x000 0x358 0x000 0x0 0x0
-#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1			0x000 0x35c 0x000 0x0 0x0
-#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26		0x000 0x360 0x000 0x0 0x0
-#define MX35_PAD_VSTBY__CCM_VSTBY				0x024 0x364 0x000 0x0 0x0
-#define MX35_PAD_VSTBY__GPIO1_7					0x024 0x364 0x85c 0x5 0x0
-#define MX35_PAD_A0__EMI_EIM_DA_L_0				0x028 0x368 0x000 0x0 0x0
-#define MX35_PAD_A1__EMI_EIM_DA_L_1				0x02c 0x36c 0x000 0x0 0x0
-#define MX35_PAD_A2__EMI_EIM_DA_L_2				0x030 0x370 0x000 0x0 0x0
-#define MX35_PAD_A3__EMI_EIM_DA_L_3				0x034 0x374 0x000 0x0 0x0
-#define MX35_PAD_A4__EMI_EIM_DA_L_4				0x038 0x378 0x000 0x0 0x0
-#define MX35_PAD_A5__EMI_EIM_DA_L_5				0x03c 0x37c 0x000 0x0 0x0
-#define MX35_PAD_A6__EMI_EIM_DA_L_6				0x040 0x380 0x000 0x0 0x0
-#define MX35_PAD_A7__EMI_EIM_DA_L_7				0x044 0x384 0x000 0x0 0x0
-#define MX35_PAD_A8__EMI_EIM_DA_H_8				0x048 0x388 0x000 0x0 0x0
-#define MX35_PAD_A9__EMI_EIM_DA_H_9				0x04c 0x38c 0x000 0x0 0x0
-#define MX35_PAD_A10__EMI_EIM_DA_H_10				0x050 0x390 0x000 0x0 0x0
-#define MX35_PAD_MA10__EMI_MA10					0x054 0x394 0x000 0x0 0x0
-#define MX35_PAD_A11__EMI_EIM_DA_H_11				0x058 0x398 0x000 0x0 0x0
-#define MX35_PAD_A12__EMI_EIM_DA_H_12				0x05c 0x39c 0x000 0x0 0x0
-#define MX35_PAD_A13__EMI_EIM_DA_H_13				0x060 0x3a0 0x000 0x0 0x0
-#define MX35_PAD_A14__EMI_EIM_DA_H2_14				0x064 0x3a4 0x000 0x0 0x0
-#define MX35_PAD_A15__EMI_EIM_DA_H2_15				0x068 0x3a8 0x000 0x0 0x0
-#define MX35_PAD_A16__EMI_EIM_A_16				0x06c 0x3ac 0x000 0x0 0x0
-#define MX35_PAD_A17__EMI_EIM_A_17				0x070 0x3b0 0x000 0x0 0x0
-#define MX35_PAD_A18__EMI_EIM_A_18				0x074 0x3b4 0x000 0x0 0x0
-#define MX35_PAD_A19__EMI_EIM_A_19				0x078 0x3b8 0x000 0x0 0x0
-#define MX35_PAD_A20__EMI_EIM_A_20				0x07c 0x3bc 0x000 0x0 0x0
-#define MX35_PAD_A21__EMI_EIM_A_21				0x080 0x3c0 0x000 0x0 0x0
-#define MX35_PAD_A22__EMI_EIM_A_22				0x084 0x3c4 0x000 0x0 0x0
-#define MX35_PAD_A23__EMI_EIM_A_23				0x088 0x3c8 0x000 0x0 0x0
-#define MX35_PAD_A24__EMI_EIM_A_24				0x08c 0x3cc 0x000 0x0 0x0
-#define MX35_PAD_A25__EMI_EIM_A_25				0x090 0x3d0 0x000 0x0 0x0
-#define MX35_PAD_SDBA1__EMI_EIM_SDBA1				0x000 0x3d4 0x000 0x0 0x0
-#define MX35_PAD_SDBA0__EMI_EIM_SDBA0				0x000 0x3d8 0x000 0x0 0x0
-#define MX35_PAD_SD0__EMI_DRAM_D_0				0x000 0x3dc 0x000 0x0 0x0
-#define MX35_PAD_SD1__EMI_DRAM_D_1				0x000 0x3e0 0x000 0x0 0x0
-#define MX35_PAD_SD2__EMI_DRAM_D_2				0x000 0x3e4 0x000 0x0 0x0
-#define MX35_PAD_SD3__EMI_DRAM_D_3				0x000 0x3e8 0x000 0x0 0x0
-#define MX35_PAD_SD4__EMI_DRAM_D_4				0x000 0x3ec 0x000 0x0 0x0
-#define MX35_PAD_SD5__EMI_DRAM_D_5				0x000 0x3f0 0x000 0x0 0x0
-#define MX35_PAD_SD6__EMI_DRAM_D_6				0x000 0x3f4 0x000 0x0 0x0
-#define MX35_PAD_SD7__EMI_DRAM_D_7				0x000 0x3f8 0x000 0x0 0x0
-#define MX35_PAD_SD8__EMI_DRAM_D_8				0x000 0x3fc 0x000 0x0 0x0
-#define MX35_PAD_SD9__EMI_DRAM_D_9				0x000 0x400 0x000 0x0 0x0
-#define MX35_PAD_SD10__EMI_DRAM_D_10				0x000 0x404 0x000 0x0 0x0
-#define MX35_PAD_SD11__EMI_DRAM_D_11				0x000 0x408 0x000 0x0 0x0
-#define MX35_PAD_SD12__EMI_DRAM_D_12				0x000 0x40c 0x000 0x0 0x0
-#define MX35_PAD_SD13__EMI_DRAM_D_13				0x000 0x410 0x000 0x0 0x0
-#define MX35_PAD_SD14__EMI_DRAM_D_14				0x000 0x414 0x000 0x0 0x0
-#define MX35_PAD_SD15__EMI_DRAM_D_15				0x000 0x418 0x000 0x0 0x0
-#define MX35_PAD_SD16__EMI_DRAM_D_16				0x000 0x41c 0x000 0x0 0x0
-#define MX35_PAD_SD17__EMI_DRAM_D_17				0x000 0x420 0x000 0x0 0x0
-#define MX35_PAD_SD18__EMI_DRAM_D_18				0x000 0x424 0x000 0x0 0x0
-#define MX35_PAD_SD19__EMI_DRAM_D_19				0x000 0x428 0x000 0x0 0x0
-#define MX35_PAD_SD20__EMI_DRAM_D_20				0x000 0x42c 0x000 0x0 0x0
-#define MX35_PAD_SD21__EMI_DRAM_D_21				0x000 0x430 0x000 0x0 0x0
-#define MX35_PAD_SD22__EMI_DRAM_D_22				0x000 0x434 0x000 0x0 0x0
-#define MX35_PAD_SD23__EMI_DRAM_D_23				0x000 0x438 0x000 0x0 0x0
-#define MX35_PAD_SD24__EMI_DRAM_D_24				0x000 0x43c 0x000 0x0 0x0
-#define MX35_PAD_SD25__EMI_DRAM_D_25				0x000 0x440 0x000 0x0 0x0
-#define MX35_PAD_SD26__EMI_DRAM_D_26				0x000 0x444 0x000 0x0 0x0
-#define MX35_PAD_SD27__EMI_DRAM_D_27				0x000 0x448 0x000 0x0 0x0
-#define MX35_PAD_SD28__EMI_DRAM_D_28				0x000 0x44c 0x000 0x0 0x0
-#define MX35_PAD_SD29__EMI_DRAM_D_29				0x000 0x450 0x000 0x0 0x0
-#define MX35_PAD_SD30__EMI_DRAM_D_30				0x000 0x454 0x000 0x0 0x0
-#define MX35_PAD_SD31__EMI_DRAM_D_31				0x000 0x458 0x000 0x0 0x0
-#define MX35_PAD_DQM0__EMI_DRAM_DQM_0				0x000 0x45c 0x000 0x0 0x0
-#define MX35_PAD_DQM1__EMI_DRAM_DQM_1				0x000 0x460 0x000 0x0 0x0
-#define MX35_PAD_DQM2__EMI_DRAM_DQM_2				0x000 0x464 0x000 0x0 0x0
-#define MX35_PAD_DQM3__EMI_DRAM_DQM_3				0x000 0x468 0x000 0x0 0x0
-#define MX35_PAD_EB0__EMI_EIM_EB0_B				0x094 0x46c 0x000 0x0 0x0
-#define MX35_PAD_EB1__EMI_EIM_EB1_B				0x098 0x470 0x000 0x0 0x0
-#define MX35_PAD_OE__EMI_EIM_OE					0x09c 0x474 0x000 0x0 0x0
-#define MX35_PAD_CS0__EMI_EIM_CS0				0x0a0 0x478 0x000 0x0 0x0
-#define MX35_PAD_CS1__EMI_EIM_CS1				0x0a4 0x47c 0x000 0x0 0x0
-#define MX35_PAD_CS1__EMI_NANDF_CE3				0x0a4 0x47c 0x000 0x3 0x0
-#define MX35_PAD_CS2__EMI_EIM_CS2				0x0a8 0x480 0x000 0x0 0x0
-#define MX35_PAD_CS3__EMI_EIM_CS3				0x0ac 0x484 0x000 0x0 0x0
-#define MX35_PAD_CS4__EMI_EIM_CS4				0x0b0 0x488 0x000 0x0 0x0
-#define MX35_PAD_CS4__EMI_DTACK_B				0x0b0 0x488 0x800 0x1 0x0
-#define MX35_PAD_CS4__EMI_NANDF_CE1				0x0b0 0x488 0x000 0x3 0x0
-#define MX35_PAD_CS4__GPIO1_20					0x0b0 0x488 0x83c 0x5 0x0
-#define MX35_PAD_CS5__EMI_EIM_CS5				0x0b4 0x48c 0x000 0x0 0x0
-#define MX35_PAD_CS5__CSPI2_SS2					0x0b4 0x48c 0x7f8 0x1 0x0
-#define MX35_PAD_CS5__CSPI1_SS2					0x0b4 0x48c 0x7d8 0x2 0x1
-#define MX35_PAD_CS5__EMI_NANDF_CE2				0x0b4 0x48c 0x000 0x3 0x0
-#define MX35_PAD_CS5__GPIO1_21					0x0b4 0x48c 0x840 0x5 0x0
-#define MX35_PAD_NF_CE0__EMI_NANDF_CE0				0x0b8 0x490 0x000 0x0 0x0
-#define MX35_PAD_NF_CE0__GPIO1_22				0x0b8 0x490 0x844 0x5 0x0
-#define MX35_PAD_ECB__EMI_EIM_ECB				0x000 0x494 0x000 0x0 0x0
-#define MX35_PAD_LBA__EMI_EIM_LBA				0x0bc 0x498 0x000 0x0 0x0
-#define MX35_PAD_BCLK__EMI_EIM_BCLK				0x0c0 0x49c 0x000 0x0 0x0
-#define MX35_PAD_RW__EMI_EIM_RW					0x0c4 0x4a0 0x000 0x0 0x0
-#define MX35_PAD_RAS__EMI_DRAM_RAS				0x000 0x4a4 0x000 0x0 0x0
-#define MX35_PAD_CAS__EMI_DRAM_CAS				0x000 0x4a8 0x000 0x0 0x0
-#define MX35_PAD_SDWE__EMI_DRAM_SDWE				0x000 0x4ac 0x000 0x0 0x0
-#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0			0x000 0x4b0 0x000 0x0 0x0
-#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1			0x000 0x4b4 0x000 0x0 0x0
-#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK				0x000 0x4b8 0x000 0x0 0x0
-#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0				0x000 0x4bc 0x000 0x0 0x0
-#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1				0x000 0x4c0 0x000 0x0 0x0
-#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2				0x000 0x4c4 0x000 0x0 0x0
-#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3				0x000 0x4c8 0x000 0x0 0x0
-#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B				0x0c8 0x4cc 0x000 0x0 0x0
-#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3			0x0c8 0x4cc 0x9d8 0x1 0x0
-#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC			0x0c8 0x4cc 0x924 0x2 0x0
-#define MX35_PAD_NFWE_B__GPIO2_18				0x0c8 0x4cc 0x88c 0x5 0x0
-#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0			0x0c8 0x4cc 0x000 0x7 0x0
-#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B				0x0cc 0x4d0 0x000 0x0 0x0
-#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR			0x0cc 0x4d0 0x9ec 0x1 0x0
-#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK				0x0cc 0x4d0 0x000 0x2 0x0
-#define MX35_PAD_NFRE_B__GPIO2_19				0x0cc 0x4d0 0x890 0x5 0x0
-#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1			0x0cc 0x4d0 0x000 0x7 0x0
-#define MX35_PAD_NFALE__EMI_NANDF_ALE				0x0d0 0x4d4 0x000 0x0 0x0
-#define MX35_PAD_NFALE__USB_TOP_USBH2_STP			0x0d0 0x4d4 0x000 0x1 0x0
-#define MX35_PAD_NFALE__IPU_DISPB_CS0				0x0d0 0x4d4 0x000 0x2 0x0
-#define MX35_PAD_NFALE__GPIO2_20				0x0d0 0x4d4 0x898 0x5 0x0
-#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2			0x0d0 0x4d4 0x000 0x7 0x0
-#define MX35_PAD_NFCLE__EMI_NANDF_CLE				0x0d4 0x4d8 0x000 0x0 0x0
-#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT			0x0d4 0x4d8 0x9f0 0x1 0x0
-#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS			0x0d4 0x4d8 0x000 0x2 0x0
-#define MX35_PAD_NFCLE__GPIO2_21				0x0d4 0x4d8 0x89c 0x5 0x0
-#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3			0x0d4 0x4d8 0x000 0x7 0x0
-#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B				0x0d8 0x4dc 0x000 0x0 0x0
-#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7			0x0d8 0x4dc 0x9e8 0x1 0x0
-#define MX35_PAD_NFWP_B__IPU_DISPB_WR				0x0d8 0x4dc 0x000 0x2 0x0
-#define MX35_PAD_NFWP_B__GPIO2_22				0x0d8 0x4dc 0x8a0 0x5 0x0
-#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL			0x0d8 0x4dc 0x000 0x7 0x0
-#define MX35_PAD_NFRB__EMI_NANDF_RB				0x0dc 0x4e0 0x000 0x0 0x0
-#define MX35_PAD_NFRB__IPU_DISPB_RD				0x0dc 0x4e0 0x000 0x2 0x0
-#define MX35_PAD_NFRB__GPIO2_23					0x0dc 0x4e0 0x8a4 0x5 0x0
-#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK				0x0dc 0x4e0 0x000 0x7 0x0
-#define MX35_PAD_D15__EMI_EIM_D_15				0x000 0x4e4 0x000 0x0 0x0
-#define MX35_PAD_D14__EMI_EIM_D_14				0x000 0x4e8 0x000 0x0 0x0
-#define MX35_PAD_D13__EMI_EIM_D_13				0x000 0x4ec 0x000 0x0 0x0
-#define MX35_PAD_D12__EMI_EIM_D_12				0x000 0x4f0 0x000 0x0 0x0
-#define MX35_PAD_D11__EMI_EIM_D_11				0x000 0x4f4 0x000 0x0 0x0
-#define MX35_PAD_D10__EMI_EIM_D_10				0x000 0x4f8 0x000 0x0 0x0
-#define MX35_PAD_D9__EMI_EIM_D_9				0x000 0x4fc 0x000 0x0 0x0
-#define MX35_PAD_D8__EMI_EIM_D_8				0x000 0x500 0x000 0x0 0x0
-#define MX35_PAD_D7__EMI_EIM_D_7				0x000 0x504 0x000 0x0 0x0
-#define MX35_PAD_D6__EMI_EIM_D_6				0x000 0x508 0x000 0x0 0x0
-#define MX35_PAD_D5__EMI_EIM_D_5				0x000 0x50c 0x000 0x0 0x0
-#define MX35_PAD_D4__EMI_EIM_D_4				0x000 0x510 0x000 0x0 0x0
-#define MX35_PAD_D3__EMI_EIM_D_3				0x000 0x514 0x000 0x0 0x0
-#define MX35_PAD_D2__EMI_EIM_D_2				0x000 0x518 0x000 0x0 0x0
-#define MX35_PAD_D1__EMI_EIM_D_1				0x000 0x51c 0x000 0x0 0x0
-#define MX35_PAD_D0__EMI_EIM_D_0				0x000 0x520 0x000 0x0 0x0
-#define MX35_PAD_CSI_D8__IPU_CSI_D_8				0x0e0 0x524 0x000 0x0 0x0
-#define MX35_PAD_CSI_D8__KPP_COL_0				0x0e0 0x524 0x950 0x1 0x0
-#define MX35_PAD_CSI_D8__GPIO1_20				0x0e0 0x524 0x83c 0x5 0x1
-#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13			0x0e0 0x524 0x000 0x7 0x0
-#define MX35_PAD_CSI_D9__IPU_CSI_D_9				0x0e4 0x528 0x000 0x0 0x0
-#define MX35_PAD_CSI_D9__KPP_COL_1				0x0e4 0x528 0x954 0x1 0x0
-#define MX35_PAD_CSI_D9__GPIO1_21				0x0e4 0x528 0x840 0x5 0x1
-#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14			0x0e4 0x528 0x000 0x7 0x0
-#define MX35_PAD_CSI_D10__IPU_CSI_D_10				0x0e8 0x52c 0x000 0x0 0x0
-#define MX35_PAD_CSI_D10__KPP_COL_2				0x0e8 0x52c 0x958 0x1 0x0
-#define MX35_PAD_CSI_D10__GPIO1_22				0x0e8 0x52c 0x844 0x5 0x1
-#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15			0x0e8 0x52c 0x000 0x7 0x0
-#define MX35_PAD_CSI_D11__IPU_CSI_D_11				0x0ec 0x530 0x000 0x0 0x0
-#define MX35_PAD_CSI_D11__KPP_COL_3				0x0ec 0x530 0x95c 0x1 0x0
-#define MX35_PAD_CSI_D11__GPIO1_23				0x0ec 0x530 0x000 0x5 0x0
-#define MX35_PAD_CSI_D12__IPU_CSI_D_12				0x0f0 0x534 0x000 0x0 0x0
-#define MX35_PAD_CSI_D12__KPP_ROW_0				0x0f0 0x534 0x970 0x1 0x0
-#define MX35_PAD_CSI_D12__GPIO1_24				0x0f0 0x534 0x000 0x5 0x0
-#define MX35_PAD_CSI_D13__IPU_CSI_D_13				0x0f4 0x538 0x000 0x0 0x0
-#define MX35_PAD_CSI_D13__KPP_ROW_1				0x0f4 0x538 0x974 0x1 0x0
-#define MX35_PAD_CSI_D13__GPIO1_25				0x0f4 0x538 0x000 0x5 0x0
-#define MX35_PAD_CSI_D14__IPU_CSI_D_14				0x0f8 0x53c 0x000 0x0 0x0
-#define MX35_PAD_CSI_D14__KPP_ROW_2				0x0f8 0x53c 0x978 0x1 0x0
-#define MX35_PAD_CSI_D14__GPIO1_26				0x0f8 0x53c 0x000 0x5 0x0
-#define MX35_PAD_CSI_D15__IPU_CSI_D_15				0x0fc 0x540 0x97c 0x0 0x0
-#define MX35_PAD_CSI_D15__KPP_ROW_3				0x0fc 0x540 0x000 0x1 0x0
-#define MX35_PAD_CSI_D15__GPIO1_27				0x0fc 0x540 0x000 0x5 0x0
-#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK				0x100 0x544 0x000 0x0 0x0
-#define MX35_PAD_CSI_MCLK__GPIO1_28				0x100 0x544 0x000 0x5 0x0
-#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC			0x104 0x548 0x000 0x0 0x0
-#define MX35_PAD_CSI_VSYNC__GPIO1_29				0x104 0x548 0x000 0x5 0x0
-#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC			0x108 0x54c 0x000 0x0 0x0
-#define MX35_PAD_CSI_HSYNC__GPIO1_30				0x108 0x54c 0x000 0x5 0x0
-#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK			0x10c 0x550 0x000 0x0 0x0
-#define MX35_PAD_CSI_PIXCLK__GPIO1_31				0x10c 0x550 0x000 0x5 0x0
-#define MX35_PAD_I2C1_CLK__I2C1_SCL				0x110 0x554 0x000 0x0 0x0
-#define MX35_PAD_I2C1_CLK__GPIO2_24				0x110 0x554 0x8a8 0x5 0x0
-#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK			0x110 0x554 0x000 0x6 0x0
-#define MX35_PAD_I2C1_DAT__I2C1_SDA				0x114 0x558 0x000 0x0 0x0
-#define MX35_PAD_I2C1_DAT__GPIO2_25				0x114 0x558 0x8ac 0x5 0x0
-#define MX35_PAD_I2C2_CLK__I2C2_SCL				0x118 0x55c 0x000 0x0 0x0
-#define MX35_PAD_I2C2_CLK__CAN1_TXCAN				0x118 0x55c 0x000 0x1 0x0
-#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR			0x118 0x55c 0x000 0x2 0x0
-#define MX35_PAD_I2C2_CLK__GPIO2_26				0x118 0x55c 0x8b0 0x5 0x0
-#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2		0x118 0x55c 0x000 0x6 0x0
-#define MX35_PAD_I2C2_DAT__I2C2_SDA				0x11c 0x560 0x000 0x0 0x0
-#define MX35_PAD_I2C2_DAT__CAN1_RXCAN				0x11c 0x560 0x7c8 0x1 0x0
-#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC			0x11c 0x560 0x9f4 0x2 0x0
-#define MX35_PAD_I2C2_DAT__GPIO2_27				0x11c 0x560 0x8b4 0x5 0x0
-#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3		0x11c 0x560 0x000 0x6 0x0
-#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD				0x120 0x564 0x000 0x0 0x0
-#define MX35_PAD_STXD4__GPIO2_28				0x120 0x564 0x8b8 0x5 0x0
-#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0		0x120 0x564 0x000 0x7 0x0
-#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD				0x124 0x568 0x000 0x0 0x0
-#define MX35_PAD_SRXD4__GPIO2_29				0x124 0x568 0x8bc 0x5 0x0
-#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1		0x124 0x568 0x000 0x7 0x0
-#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC				0x128 0x56c 0x000 0x0 0x0
-#define MX35_PAD_SCK4__GPIO2_30					0x128 0x56c 0x8c4 0x5 0x0
-#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2			0x128 0x56c 0x000 0x7 0x0
-#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS			0x12c 0x570 0x000 0x0 0x0
-#define MX35_PAD_STXFS4__GPIO2_31				0x12c 0x570 0x8c8 0x5 0x0
-#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3		0x12c 0x570 0x000 0x7 0x0
-#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD				0x130 0x574 0x000 0x0 0x0
-#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1			0x130 0x574 0x000 0x1 0x0
-#define MX35_PAD_STXD5__CSPI2_MOSI				0x130 0x574 0x7ec 0x2 0x0
-#define MX35_PAD_STXD5__GPIO1_0					0x130 0x574 0x82c 0x5 0x1
-#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4		0x130 0x574 0x000 0x7 0x0
-#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD				0x134 0x578 0x000 0x0 0x0
-#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1				0x134 0x578 0x998 0x1 0x0
-#define MX35_PAD_SRXD5__CSPI2_MISO				0x134 0x578 0x7e8 0x2 0x0
-#define MX35_PAD_SRXD5__GPIO1_1					0x134 0x578 0x838 0x5 0x1
-#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5		0x134 0x578 0x000 0x7 0x0
-#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC				0x138 0x57c 0x000 0x0 0x0
-#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK			0x138 0x57c 0x994 0x1 0x0
-#define MX35_PAD_SCK5__CSPI2_SCLK				0x138 0x57c 0x7e0 0x2 0x0
-#define MX35_PAD_SCK5__GPIO1_2					0x138 0x57c 0x848 0x5 0x0
-#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6			0x138 0x57c 0x000 0x7 0x0
-#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS			0x13c 0x580 0x000 0x0 0x0
-#define MX35_PAD_STXFS5__CSPI2_RDY				0x13c 0x580 0x7e4 0x2 0x0
-#define MX35_PAD_STXFS5__GPIO1_3				0x13c 0x580 0x84c 0x5 0x0
-#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7		0x13c 0x580 0x000 0x7 0x0
-#define MX35_PAD_SCKR__ESAI_SCKR				0x140 0x584 0x000 0x0 0x0
-#define MX35_PAD_SCKR__GPIO1_4					0x140 0x584 0x850 0x5 0x1
-#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10			0x140 0x584 0x000 0x7 0x0
-#define MX35_PAD_FSR__ESAI_FSR					0x144 0x588 0x000 0x0 0x0
-#define MX35_PAD_FSR__GPIO1_5					0x144 0x588 0x854 0x5 0x1
-#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11			0x144 0x588 0x000 0x7 0x0
-#define MX35_PAD_HCKR__ESAI_HCKR				0x148 0x58c 0x000 0x0 0x0
-#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS				0x148 0x58c 0x000 0x1 0x0
-#define MX35_PAD_HCKR__CSPI2_SS0				0x148 0x58c 0x7f0 0x2 0x0
-#define MX35_PAD_HCKR__IPU_FLASH_STROBE				0x148 0x58c 0x000 0x3 0x0
-#define MX35_PAD_HCKR__GPIO1_6					0x148 0x58c 0x858 0x5 0x1
-#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12			0x148 0x58c 0x000 0x7 0x0
-#define MX35_PAD_SCKT__ESAI_SCKT				0x14c 0x590 0x000 0x0 0x0
-#define MX35_PAD_SCKT__GPIO1_7					0x14c 0x590 0x85c 0x5 0x1
-#define MX35_PAD_SCKT__IPU_CSI_D_0				0x14c 0x590 0x930 0x6 0x0
-#define MX35_PAD_SCKT__KPP_ROW_2				0x14c 0x590 0x978 0x7 0x1
-#define MX35_PAD_FST__ESAI_FST					0x150 0x594 0x000 0x0 0x0
-#define MX35_PAD_FST__GPIO1_8					0x150 0x594 0x860 0x5 0x1
-#define MX35_PAD_FST__IPU_CSI_D_1				0x150 0x594 0x934 0x6 0x0
-#define MX35_PAD_FST__KPP_ROW_3					0x150 0x594 0x97c 0x7 0x1
-#define MX35_PAD_HCKT__ESAI_HCKT				0x154 0x598 0x000 0x0 0x0
-#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC				0x154 0x598 0x7a8 0x1 0x0
-#define MX35_PAD_HCKT__GPIO1_9					0x154 0x598 0x864 0x5 0x0
-#define MX35_PAD_HCKT__IPU_CSI_D_2				0x154 0x598 0x938 0x6 0x0
-#define MX35_PAD_HCKT__KPP_COL_3				0x154 0x598 0x95c 0x7 0x1
-#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0				0x158 0x59c 0x000 0x0 0x0
-#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC			0x158 0x59c 0x000 0x1 0x0
-#define MX35_PAD_TX5_RX0__CSPI2_SS2				0x158 0x59c 0x7f8 0x2 0x1
-#define MX35_PAD_TX5_RX0__CAN2_TXCAN				0x158 0x59c 0x000 0x3 0x0
-#define MX35_PAD_TX5_RX0__UART2_DTR				0x158 0x59c 0x000 0x4 0x0
-#define MX35_PAD_TX5_RX0__GPIO1_10				0x158 0x59c 0x830 0x5 0x0
-#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0		0x158 0x59c 0x000 0x7 0x0
-#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1				0x15c 0x5a0 0x000 0x0 0x0
-#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS			0x15c 0x5a0 0x000 0x1 0x0
-#define MX35_PAD_TX4_RX1__CSPI2_SS3				0x15c 0x5a0 0x7fc 0x2 0x0
-#define MX35_PAD_TX4_RX1__CAN2_RXCAN				0x15c 0x5a0 0x7cc 0x3 0x0
-#define MX35_PAD_TX4_RX1__UART2_DSR				0x15c 0x5a0 0x000 0x4 0x0
-#define MX35_PAD_TX4_RX1__GPIO1_11				0x15c 0x5a0 0x834 0x5 0x0
-#define MX35_PAD_TX4_RX1__IPU_CSI_D_3				0x15c 0x5a0 0x93c 0x6 0x0
-#define MX35_PAD_TX4_RX1__KPP_ROW_0				0x15c 0x5a0 0x970 0x7 0x1
-#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2				0x160 0x5a4 0x000 0x0 0x0
-#define MX35_PAD_TX3_RX2__I2C3_SCL				0x160 0x5a4 0x91c 0x1 0x0
-#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1				0x160 0x5a4 0x000 0x3 0x0
-#define MX35_PAD_TX3_RX2__GPIO1_12				0x160 0x5a4 0x000 0x5 0x0
-#define MX35_PAD_TX3_RX2__IPU_CSI_D_4				0x160 0x5a4 0x940 0x6 0x0
-#define MX35_PAD_TX3_RX2__KPP_ROW_1				0x160 0x5a4 0x974 0x7 0x1
-#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3				0x164 0x5a8 0x000 0x0 0x0
-#define MX35_PAD_TX2_RX3__I2C3_SDA				0x164 0x5a8 0x920 0x1 0x0
-#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2				0x164 0x5a8 0x000 0x3 0x0
-#define MX35_PAD_TX2_RX3__GPIO1_13				0x164 0x5a8 0x000 0x5 0x0
-#define MX35_PAD_TX2_RX3__IPU_CSI_D_5				0x164 0x5a8 0x944 0x6 0x0
-#define MX35_PAD_TX2_RX3__KPP_COL_0				0x164 0x5a8 0x950 0x7 0x1
-#define MX35_PAD_TX1__ESAI_TX1					0x168 0x5ac 0x000 0x0 0x0
-#define MX35_PAD_TX1__CCM_PMIC_RDY				0x168 0x5ac 0x7d4 0x1 0x1
-#define MX35_PAD_TX1__CSPI1_SS2					0x168 0x5ac 0x7d8 0x2 0x2
-#define MX35_PAD_TX1__EMI_NANDF_CE3				0x168 0x5ac 0x000 0x3 0x0
-#define MX35_PAD_TX1__UART2_RI					0x168 0x5ac 0x000 0x4 0x0
-#define MX35_PAD_TX1__GPIO1_14					0x168 0x5ac 0x000 0x5 0x0
-#define MX35_PAD_TX1__IPU_CSI_D_6				0x168 0x5ac 0x948 0x6 0x0
-#define MX35_PAD_TX1__KPP_COL_1					0x168 0x5ac 0x954 0x7 0x1
-#define MX35_PAD_TX0__ESAI_TX0					0x16c 0x5b0 0x000 0x0 0x0
-#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK			0x16c 0x5b0 0x994 0x1 0x1
-#define MX35_PAD_TX0__CSPI1_SS3					0x16c 0x5b0 0x7dc 0x2 0x0
-#define MX35_PAD_TX0__EMI_DTACK_B				0x16c 0x5b0 0x800 0x3 0x1
-#define MX35_PAD_TX0__UART2_DCD					0x16c 0x5b0 0x000 0x4 0x0
-#define MX35_PAD_TX0__GPIO1_15					0x16c 0x5b0 0x000 0x5 0x0
-#define MX35_PAD_TX0__IPU_CSI_D_7				0x16c 0x5b0 0x94c 0x6 0x0
-#define MX35_PAD_TX0__KPP_COL_2					0x16c 0x5b0 0x958 0x7 0x1
-#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI				0x170 0x5b4 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_MOSI__GPIO1_16				0x170 0x5b4 0x000 0x5 0x0
-#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2		0x170 0x5b4 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_MISO__CSPI1_MISO				0x174 0x5b8 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_MISO__GPIO1_17				0x174 0x5b8 0x000 0x5 0x0
-#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3		0x174 0x5b8 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_SS0__CSPI1_SS0				0x178 0x5bc 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_SS0__OWIRE_LINE				0x178 0x5bc 0x990 0x1 0x1
-#define MX35_PAD_CSPI1_SS0__CSPI2_SS3				0x178 0x5bc 0x7fc 0x2 0x1
-#define MX35_PAD_CSPI1_SS0__GPIO1_18				0x178 0x5bc 0x000 0x5 0x0
-#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4			0x178 0x5bc 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_SS1__CSPI1_SS1				0x17c 0x5c0 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_SS1__PWM_PWMO				0x17c 0x5c0 0x000 0x1 0x0
-#define MX35_PAD_CSPI1_SS1__CCM_CLK32K				0x17c 0x5c0 0x7d0 0x2 0x1
-#define MX35_PAD_CSPI1_SS1__GPIO1_19				0x17c 0x5c0 0x000 0x5 0x0
-#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29			0x17c 0x5c0 0x000 0x6 0x0
-#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5			0x17c 0x5c0 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK				0x180 0x5c4 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_SCLK__GPIO3_4				0x180 0x5c4 0x904 0x5 0x0
-#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30			0x180 0x5c4 0x000 0x6 0x0
-#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1		0x180 0x5c4 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY			0x184 0x5c8 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5				0x184 0x5c8 0x908 0x5 0x0
-#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31			0x184 0x5c8 0x000 0x6 0x0
-#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2	0x184 0x5c8 0x000 0x7 0x0
-#define MX35_PAD_RXD1__UART1_RXD_MUX				0x188 0x5cc 0x000 0x0 0x0
-#define MX35_PAD_RXD1__CSPI2_MOSI				0x188 0x5cc 0x7ec 0x1 0x1
-#define MX35_PAD_RXD1__KPP_COL_4				0x188 0x5cc 0x960 0x4 0x0
-#define MX35_PAD_RXD1__GPIO3_6					0x188 0x5cc 0x90c 0x5 0x0
-#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16			0x188 0x5cc 0x000 0x7 0x0
-#define MX35_PAD_TXD1__UART1_TXD_MUX				0x18c 0x5d0 0x000 0x0 0x0
-#define MX35_PAD_TXD1__CSPI2_MISO				0x18c 0x5d0 0x7e8 0x1 0x1
-#define MX35_PAD_TXD1__KPP_COL_5				0x18c 0x5d0 0x964 0x4 0x0
-#define MX35_PAD_TXD1__GPIO3_7					0x18c 0x5d0 0x910 0x5 0x0
-#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17			0x18c 0x5d0 0x000 0x7 0x0
-#define MX35_PAD_RTS1__UART1_RTS				0x190 0x5d4 0x000 0x0 0x0
-#define MX35_PAD_RTS1__CSPI2_SCLK				0x190 0x5d4 0x7e0 0x1 0x1
-#define MX35_PAD_RTS1__I2C3_SCL					0x190 0x5d4 0x91c 0x2 0x1
-#define MX35_PAD_RTS1__IPU_CSI_D_0				0x190 0x5d4 0x930 0x3 0x1
-#define MX35_PAD_RTS1__KPP_COL_6				0x190 0x5d4 0x968 0x4 0x0
-#define MX35_PAD_RTS1__GPIO3_8					0x190 0x5d4 0x914 0x5 0x0
-#define MX35_PAD_RTS1__EMI_NANDF_CE1				0x190 0x5d4 0x000 0x6 0x0
-#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18			0x190 0x5d4 0x000 0x7 0x0
-#define MX35_PAD_CTS1__UART1_CTS				0x194 0x5d8 0x000 0x0 0x0
-#define MX35_PAD_CTS1__CSPI2_RDY				0x194 0x5d8 0x7e4 0x1 0x1
-#define MX35_PAD_CTS1__I2C3_SDA					0x194 0x5d8 0x920 0x2 0x1
-#define MX35_PAD_CTS1__IPU_CSI_D_1				0x194 0x5d8 0x934 0x3 0x1
-#define MX35_PAD_CTS1__KPP_COL_7				0x194 0x5d8 0x96c 0x4 0x0
-#define MX35_PAD_CTS1__GPIO3_9					0x194 0x5d8 0x918 0x5 0x0
-#define MX35_PAD_CTS1__EMI_NANDF_CE2				0x194 0x5d8 0x000 0x6 0x0
-#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19			0x194 0x5d8 0x000 0x7 0x0
-#define MX35_PAD_RXD2__UART2_RXD_MUX				0x198 0x5dc 0x000 0x0 0x0
-#define MX35_PAD_RXD2__KPP_ROW_4				0x198 0x5dc 0x980 0x4 0x0
-#define MX35_PAD_RXD2__GPIO3_10					0x198 0x5dc 0x8ec 0x5 0x0
-#define MX35_PAD_TXD2__UART2_TXD_MUX				0x19c 0x5e0 0x000 0x0 0x0
-#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK			0x19c 0x5e0 0x994 0x1 0x2
-#define MX35_PAD_TXD2__KPP_ROW_5				0x19c 0x5e0 0x984 0x4 0x0
-#define MX35_PAD_TXD2__GPIO3_11					0x19c 0x5e0 0x8f0 0x5 0x0
-#define MX35_PAD_RTS2__UART2_RTS				0x1a0 0x5e4 0x000 0x0 0x0
-#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1				0x1a0 0x5e4 0x998 0x1 0x1
-#define MX35_PAD_RTS2__CAN2_RXCAN				0x1a0 0x5e4 0x7cc 0x2 0x1
-#define MX35_PAD_RTS2__IPU_CSI_D_2				0x1a0 0x5e4 0x938 0x3 0x1
-#define MX35_PAD_RTS2__KPP_ROW_6				0x1a0 0x5e4 0x988 0x4 0x0
-#define MX35_PAD_RTS2__GPIO3_12					0x1a0 0x5e4 0x8f4 0x5 0x0
-#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC				0x1a0 0x5e4 0x000 0x6 0x0
-#define MX35_PAD_RTS2__UART3_RXD_MUX				0x1a0 0x5e4 0x9a0 0x7 0x0
-#define MX35_PAD_CTS2__UART2_CTS				0x1a4 0x5e8 0x000 0x0 0x0
-#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1				0x1a4 0x5e8 0x000 0x1 0x0
-#define MX35_PAD_CTS2__CAN2_TXCAN				0x1a4 0x5e8 0x000 0x2 0x0
-#define MX35_PAD_CTS2__IPU_CSI_D_3				0x1a4 0x5e8 0x93c 0x3 0x1
-#define MX35_PAD_CTS2__KPP_ROW_7				0x1a4 0x5e8 0x98c 0x4 0x0
-#define MX35_PAD_CTS2__GPIO3_13					0x1a4 0x5e8 0x8f8 0x5 0x0
-#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS				0x1a4 0x5e8 0x000 0x6 0x0
-#define MX35_PAD_CTS2__UART3_TXD_MUX				0x1a4 0x5e8 0x000 0x7 0x0
-#define MX35_PAD_RTCK__ARM11P_TOP_RTCK				0x000 0x5ec 0x000 0x0 0x0
-#define MX35_PAD_TCK__SJC_TCK					0x000 0x5f0 0x000 0x0 0x0
-#define MX35_PAD_TMS__SJC_TMS					0x000 0x5f4 0x000 0x0 0x0
-#define MX35_PAD_TDI__SJC_TDI					0x000 0x5f8 0x000 0x0 0x0
-#define MX35_PAD_TDO__SJC_TDO					0x000 0x5fc 0x000 0x0 0x0
-#define MX35_PAD_TRSTB__SJC_TRSTB				0x000 0x600 0x000 0x0 0x0
-#define MX35_PAD_DE_B__SJC_DE_B					0x000 0x604 0x000 0x0 0x0
-#define MX35_PAD_SJC_MOD__SJC_MOD				0x000 0x608 0x000 0x0 0x0
-#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR			0x1a8 0x60c 0x000 0x0 0x0
-#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR			0x1a8 0x60c 0x000 0x1 0x0
-#define MX35_PAD_USBOTG_PWR__GPIO3_14				0x1a8 0x60c 0x8fc 0x5 0x0
-#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC			0x1ac 0x610 0x000 0x0 0x0
-#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC			0x1ac 0x610 0x9f4 0x1 0x1
-#define MX35_PAD_USBOTG_OC__GPIO3_15				0x1ac 0x610 0x900 0x5 0x0
-#define MX35_PAD_LD0__IPU_DISPB_DAT_0				0x1b0 0x614 0x000 0x0 0x0
-#define MX35_PAD_LD0__GPIO2_0					0x1b0 0x614 0x868 0x5 0x1
-#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0			0x1b0 0x614 0x000 0x6 0x0
-#define MX35_PAD_LD1__IPU_DISPB_DAT_1				0x1b4 0x618 0x000 0x0 0x0
-#define MX35_PAD_LD1__GPIO2_1					0x1b4 0x618 0x894 0x5 0x0
-#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1			0x1b4 0x618 0x000 0x6 0x0
-#define MX35_PAD_LD2__IPU_DISPB_DAT_2				0x1b8 0x61c 0x000 0x0 0x0
-#define MX35_PAD_LD2__GPIO2_2					0x1b8 0x61c 0x8c0 0x5 0x0
-#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2			0x1b8 0x61c 0x000 0x6 0x0
-#define MX35_PAD_LD3__IPU_DISPB_DAT_3				0x1bc 0x620 0x000 0x0 0x0
-#define MX35_PAD_LD3__GPIO2_3					0x1bc 0x620 0x8cc 0x5 0x0
-#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3			0x1bc 0x620 0x000 0x6 0x0
-#define MX35_PAD_LD4__IPU_DISPB_DAT_4				0x1c0 0x624 0x000 0x0 0x0
-#define MX35_PAD_LD4__GPIO2_4					0x1c0 0x624 0x8d0 0x5 0x0
-#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4			0x1c0 0x624 0x000 0x6 0x0
-#define MX35_PAD_LD5__IPU_DISPB_DAT_5				0x1c4 0x628 0x000 0x0 0x0
-#define MX35_PAD_LD5__GPIO2_5					0x1c4 0x628 0x8d4 0x5 0x0
-#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5			0x1c4 0x628 0x000 0x6 0x0
-#define MX35_PAD_LD6__IPU_DISPB_DAT_6				0x1c8 0x62c 0x000 0x0 0x0
-#define MX35_PAD_LD6__GPIO2_6					0x1c8 0x62c 0x8d8 0x5 0x0
-#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6			0x1c8 0x62c 0x000 0x6 0x0
-#define MX35_PAD_LD7__IPU_DISPB_DAT_7				0x1cc 0x630 0x000 0x0 0x0
-#define MX35_PAD_LD7__GPIO2_7					0x1cc 0x630 0x8dc 0x5 0x0
-#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7			0x1cc 0x630 0x000 0x6 0x0
-#define MX35_PAD_LD8__IPU_DISPB_DAT_8				0x1d0 0x634 0x000 0x0 0x0
-#define MX35_PAD_LD8__GPIO2_8					0x1d0 0x634 0x8e0 0x5 0x0
-#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			0x1d0 0x634 0x000 0x6 0x0
-#define MX35_PAD_LD9__IPU_DISPB_DAT_9				0x1d4 0x638 0x000 0x0 0x0
-#define MX35_PAD_LD9__GPIO2_9					0x1d4 0x638 0x8e4 0x5 0x0
-#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			0x1d4 0x638 0x000 0x6 0x0
-#define MX35_PAD_LD10__IPU_DISPB_DAT_10				0x1d8 0x63c 0x000 0x0 0x0
-#define MX35_PAD_LD10__GPIO2_10					0x1d8 0x63c 0x86c 0x5 0x0
-#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10			0x1d8 0x63c 0x000 0x6 0x0
-#define MX35_PAD_LD11__IPU_DISPB_DAT_11				0x1dc 0x640 0x000 0x0 0x0
-#define MX35_PAD_LD11__GPIO2_11					0x1dc 0x640 0x870 0x5 0x0
-#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11			0x1dc 0x640 0x000 0x6 0x0
-#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4			0x1dc 0x640 0x000 0x7 0x0
-#define MX35_PAD_LD12__IPU_DISPB_DAT_12				0x1e0 0x644 0x000 0x0 0x0
-#define MX35_PAD_LD12__GPIO2_12					0x1e0 0x644 0x874 0x5 0x0
-#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12			0x1e0 0x644 0x000 0x6 0x0
-#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5			0x1e0 0x644 0x000 0x7 0x0
-#define MX35_PAD_LD13__IPU_DISPB_DAT_13				0x1e4 0x648 0x000 0x0 0x0
-#define MX35_PAD_LD13__GPIO2_13					0x1e4 0x648 0x878 0x5 0x0
-#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13			0x1e4 0x648 0x000 0x6 0x0
-#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6			0x1e4 0x648 0x000 0x7 0x0
-#define MX35_PAD_LD14__IPU_DISPB_DAT_14				0x1e8 0x64c 0x000 0x0 0x0
-#define MX35_PAD_LD14__GPIO2_14					0x1e8 0x64c 0x87c 0x5 0x0
-#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0		0x1e8 0x64c 0x000 0x6 0x0
-#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7			0x1e8 0x64c 0x000 0x7 0x0
-#define MX35_PAD_LD15__IPU_DISPB_DAT_15				0x1ec 0x650 0x000 0x0 0x0
-#define MX35_PAD_LD15__GPIO2_15					0x1ec 0x650 0x880 0x5 0x0
-#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1		0x1ec 0x650 0x000 0x6 0x0
-#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8			0x1ec 0x650 0x000 0x7 0x0
-#define MX35_PAD_LD16__IPU_DISPB_DAT_16				0x1f0 0x654 0x000 0x0 0x0
-#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC			0x1f0 0x654 0x928 0x2 0x0
-#define MX35_PAD_LD16__GPIO2_16					0x1f0 0x654 0x884 0x5 0x0
-#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2		0x1f0 0x654 0x000 0x6 0x0
-#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9			0x1f0 0x654 0x000 0x7 0x0
-#define MX35_PAD_LD17__IPU_DISPB_DAT_17				0x1f4 0x658 0x000 0x0 0x0
-#define MX35_PAD_LD17__IPU_DISPB_CS2				0x1f4 0x658 0x000 0x2 0x0
-#define MX35_PAD_LD17__GPIO2_17					0x1f4 0x658 0x888 0x5 0x0
-#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3		0x1f4 0x658 0x000 0x6 0x0
-#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10			0x1f4 0x658 0x000 0x7 0x0
-#define MX35_PAD_LD18__IPU_DISPB_DAT_18				0x1f8 0x65c 0x000 0x0 0x0
-#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC			0x1f8 0x65c 0x924 0x1 0x1
-#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC			0x1f8 0x65c 0x928 0x2 0x1
-#define MX35_PAD_LD18__ESDHC3_CMD				0x1f8 0x65c 0x818 0x3 0x0
-#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3			0x1f8 0x65c 0x9b0 0x4 0x0
-#define MX35_PAD_LD18__GPIO3_24					0x1f8 0x65c 0x000 0x5 0x0
-#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4		0x1f8 0x65c 0x000 0x6 0x0
-#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11			0x1f8 0x65c 0x000 0x7 0x0
-#define MX35_PAD_LD19__IPU_DISPB_DAT_19				0x1fc 0x660 0x000 0x0 0x0
-#define MX35_PAD_LD19__IPU_DISPB_BCLK				0x1fc 0x660 0x000 0x1 0x0
-#define MX35_PAD_LD19__IPU_DISPB_CS1				0x1fc 0x660 0x000 0x2 0x0
-#define MX35_PAD_LD19__ESDHC3_CLK				0x1fc 0x660 0x814 0x3 0x0
-#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR			0x1fc 0x660 0x9c4 0x4 0x0
-#define MX35_PAD_LD19__GPIO3_25					0x1fc 0x660 0x000 0x5 0x0
-#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5		0x1fc 0x660 0x000 0x6 0x0
-#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12			0x1fc 0x660 0x000 0x7 0x0
-#define MX35_PAD_LD20__IPU_DISPB_DAT_20				0x200 0x664 0x000 0x0 0x0
-#define MX35_PAD_LD20__IPU_DISPB_CS0				0x200 0x664 0x000 0x1 0x0
-#define MX35_PAD_LD20__IPU_DISPB_SD_CLK				0x200 0x664 0x000 0x2 0x0
-#define MX35_PAD_LD20__ESDHC3_DAT0				0x200 0x664 0x81c 0x3 0x0
-#define MX35_PAD_LD20__GPIO3_26					0x200 0x664 0x000 0x5 0x0
-#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3		0x200 0x664 0x000 0x6 0x0
-#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13			0x200 0x664 0x000 0x7 0x0
-#define MX35_PAD_LD21__IPU_DISPB_DAT_21				0x204 0x668 0x000 0x0 0x0
-#define MX35_PAD_LD21__IPU_DISPB_PAR_RS				0x204 0x668 0x000 0x1 0x0
-#define MX35_PAD_LD21__IPU_DISPB_SER_RS				0x204 0x668 0x000 0x2 0x0
-#define MX35_PAD_LD21__ESDHC3_DAT1				0x204 0x668 0x820 0x3 0x0
-#define MX35_PAD_LD21__USB_TOP_USBOTG_STP			0x204 0x668 0x000 0x4 0x0
-#define MX35_PAD_LD21__GPIO3_27					0x204 0x668 0x000 0x5 0x0
-#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x204 0x668 0x000 0x6 0x0
-#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14			0x204 0x668 0x000 0x7 0x0
-#define MX35_PAD_LD22__IPU_DISPB_DAT_22				0x208 0x66c 0x000 0x0 0x0
-#define MX35_PAD_LD22__IPU_DISPB_WR				0x208 0x66c 0x000 0x1 0x0
-#define MX35_PAD_LD22__IPU_DISPB_SD_D_I				0x208 0x66c 0x92c 0x2 0x0
-#define MX35_PAD_LD22__ESDHC3_DAT2				0x208 0x66c 0x824 0x3 0x0
-#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT			0x208 0x66c 0x9c8 0x4 0x0
-#define MX35_PAD_LD22__GPIO3_28					0x208 0x66c 0x000 0x5 0x0
-#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR			0x208 0x66c 0x000 0x6 0x0
-#define MX35_PAD_LD22__ARM11P_TOP_TRCTL				0x208 0x66c 0x000 0x7 0x0
-#define MX35_PAD_LD23__IPU_DISPB_DAT_23				0x20c 0x670 0x000 0x0 0x0
-#define MX35_PAD_LD23__IPU_DISPB_RD				0x20c 0x670 0x000 0x1 0x0
-#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO			0x20c 0x670 0x92c 0x2 0x1
-#define MX35_PAD_LD23__ESDHC3_DAT3				0x20c 0x670 0x828 0x3 0x0
-#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7			0x20c 0x670 0x9c0 0x4 0x0
-#define MX35_PAD_LD23__GPIO3_29					0x20c 0x670 0x000 0x5 0x0
-#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS			0x20c 0x670 0x000 0x6 0x0
-#define MX35_PAD_LD23__ARM11P_TOP_TRCLK				0x20c 0x670 0x000 0x7 0x0
-#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC			0x210 0x674 0x000 0x0 0x0
-#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO			0x210 0x674 0x92c 0x2 0x2
-#define MX35_PAD_D3_HSYNC__GPIO3_30				0x210 0x674 0x000 0x5 0x0
-#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE		0x210 0x674 0x000 0x6 0x0
-#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15			0x210 0x674 0x000 0x7 0x0
-#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK			0x214 0x678 0x000 0x0 0x0
-#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK			0x214 0x678 0x000 0x2 0x0
-#define MX35_PAD_D3_FPSHIFT__GPIO3_31				0x214 0x678 0x000 0x5 0x0
-#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0	0x214 0x678 0x000 0x6 0x0
-#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16		0x214 0x678 0x000 0x7 0x0
-#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY			0x218 0x67c 0x000 0x0 0x0
-#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O			0x218 0x67c 0x000 0x2 0x0
-#define MX35_PAD_D3_DRDY__GPIO1_0				0x218 0x67c 0x82c 0x5 0x2
-#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1		0x218 0x67c 0x000 0x6 0x0
-#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17			0x218 0x67c 0x000 0x7 0x0
-#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR			0x21c 0x680 0x000 0x0 0x0
-#define MX35_PAD_CONTRAST__GPIO1_1				0x21c 0x680 0x838 0x5 0x2
-#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2	0x21c 0x680 0x000 0x6 0x0
-#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18			0x21c 0x680 0x000 0x7 0x0
-#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC			0x220 0x684 0x000 0x0 0x0
-#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1			0x220 0x684 0x000 0x2 0x0
-#define MX35_PAD_D3_VSYNC__GPIO1_2				0x220 0x684 0x848 0x5 0x1
-#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD			0x220 0x684 0x000 0x6 0x0
-#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19			0x220 0x684 0x000 0x7 0x0
-#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV			0x224 0x688 0x000 0x0 0x0
-#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS			0x224 0x688 0x000 0x2 0x0
-#define MX35_PAD_D3_REV__GPIO1_3				0x224 0x688 0x84c 0x5 0x1
-#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB			0x224 0x688 0x000 0x6 0x0
-#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20			0x224 0x688 0x000 0x7 0x0
-#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS			0x228 0x68c 0x000 0x0 0x0
-#define MX35_PAD_D3_CLS__IPU_DISPB_CS2				0x228 0x68c 0x000 0x2 0x0
-#define MX35_PAD_D3_CLS__GPIO1_4				0x228 0x68c 0x850 0x5 0x2
-#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0		0x228 0x68c 0x000 0x6 0x0
-#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21			0x228 0x68c 0x000 0x7 0x0
-#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL			0x22c 0x690 0x000 0x0 0x0
-#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC			0x22c 0x690 0x928 0x2 0x2
-#define MX35_PAD_D3_SPL__GPIO1_5				0x22c 0x690 0x854 0x5 0x2
-#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1		0x22c 0x690 0x000 0x6 0x0
-#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22			0x22c 0x690 0x000 0x7 0x0
-#define MX35_PAD_SD1_CMD__ESDHC1_CMD				0x230 0x694 0x000 0x0 0x0
-#define MX35_PAD_SD1_CMD__MSHC_SCLK				0x230 0x694 0x000 0x1 0x0
-#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC			0x230 0x694 0x924 0x3 0x2
-#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4			0x230 0x694 0x9b4 0x4 0x0
-#define MX35_PAD_SD1_CMD__GPIO1_6				0x230 0x694 0x858 0x5 0x2
-#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL			0x230 0x694 0x000 0x7 0x0
-#define MX35_PAD_SD1_CLK__ESDHC1_CLK				0x234 0x698 0x000 0x0 0x0
-#define MX35_PAD_SD1_CLK__MSHC_BS				0x234 0x698 0x000 0x1 0x0
-#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK			0x234 0x698 0x000 0x3 0x0
-#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5			0x234 0x698 0x9b8 0x4 0x0
-#define MX35_PAD_SD1_CLK__GPIO1_7				0x234 0x698 0x85c 0x5 0x2
-#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK			0x234 0x698 0x000 0x7 0x0
-#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0				0x238 0x69c 0x000 0x0 0x0
-#define MX35_PAD_SD1_DATA0__MSHC_DATA_0				0x238 0x69c 0x000 0x1 0x0
-#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0			0x238 0x69c 0x000 0x3 0x0
-#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6		0x238 0x69c 0x9bc 0x4 0x0
-#define MX35_PAD_SD1_DATA0__GPIO1_8				0x238 0x69c 0x860 0x5 0x2
-#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23			0x238 0x69c 0x000 0x7 0x0
-#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1				0x23c 0x6a0 0x000 0x0 0x0
-#define MX35_PAD_SD1_DATA1__MSHC_DATA_1				0x23c 0x6a0 0x000 0x1 0x0
-#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS			0x23c 0x6a0 0x000 0x3 0x0
-#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0		0x23c 0x6a0 0x9a4 0x4 0x0
-#define MX35_PAD_SD1_DATA1__GPIO1_9				0x23c 0x6a0 0x864 0x5 0x1
-#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24			0x23c 0x6a0 0x000 0x7 0x0
-#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2				0x240 0x6a4 0x000 0x0 0x0
-#define MX35_PAD_SD1_DATA2__MSHC_DATA_2				0x240 0x6a4 0x000 0x1 0x0
-#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR			0x240 0x6a4 0x000 0x3 0x0
-#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1		0x240 0x6a4 0x9a8 0x4 0x0
-#define MX35_PAD_SD1_DATA2__GPIO1_10				0x240 0x6a4 0x830 0x5 0x1
-#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25			0x240 0x6a4 0x000 0x7 0x0
-#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3				0x244 0x6a8 0x000 0x0 0x0
-#define MX35_PAD_SD1_DATA3__MSHC_DATA_3				0x244 0x6a8 0x000 0x1 0x0
-#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD			0x244 0x6a8 0x000 0x3 0x0
-#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2		0x244 0x6a8 0x9ac 0x4 0x0
-#define MX35_PAD_SD1_DATA3__GPIO1_11				0x244 0x6a8 0x834 0x5 0x1
-#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26			0x244 0x6a8 0x000 0x7 0x0
-#define MX35_PAD_SD2_CMD__ESDHC2_CMD				0x248 0x6ac 0x000 0x0 0x0
-#define MX35_PAD_SD2_CMD__I2C3_SCL				0x248 0x6ac 0x91c 0x1 0x2
-#define MX35_PAD_SD2_CMD__ESDHC1_DAT4				0x248 0x6ac 0x804 0x2 0x0
-#define MX35_PAD_SD2_CMD__IPU_CSI_D_2				0x248 0x6ac 0x938 0x3 0x2
-#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4			0x248 0x6ac 0x9dc 0x4 0x0
-#define MX35_PAD_SD2_CMD__GPIO2_0				0x248 0x6ac 0x868 0x5 0x2
-#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1			0x248 0x6ac 0x000 0x6 0x0
-#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC			0x248 0x6ac 0x928 0x7 0x3
-#define MX35_PAD_SD2_CLK__ESDHC2_CLK				0x24c 0x6b0 0x000 0x0 0x0
-#define MX35_PAD_SD2_CLK__I2C3_SDA				0x24c 0x6b0 0x920 0x1 0x2
-#define MX35_PAD_SD2_CLK__ESDHC1_DAT5				0x24c 0x6b0 0x808 0x2 0x0
-#define MX35_PAD_SD2_CLK__IPU_CSI_D_3				0x24c 0x6b0 0x93c 0x3 0x2
-#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5			0x24c 0x6b0 0x9e0 0x4 0x0
-#define MX35_PAD_SD2_CLK__GPIO2_1				0x24c 0x6b0 0x894 0x5 0x1
-#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1			0x24c 0x6b0 0x998 0x6 0x2
-#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2				0x24c 0x6b0 0x000 0x7 0x0
-#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0				0x250 0x6b4 0x000 0x0 0x0
-#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX			0x250 0x6b4 0x9a0 0x1 0x1
-#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6				0x250 0x6b4 0x80c 0x2 0x0
-#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4				0x250 0x6b4 0x940 0x3 0x1
-#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6		0x250 0x6b4 0x9e4 0x4 0x0
-#define MX35_PAD_SD2_DATA0__GPIO2_2				0x250 0x6b4 0x8c0 0x5 0x1
-#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK			0x250 0x6b4 0x994 0x6 0x3
-#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1				0x254 0x6b8 0x000 0x0 0x0
-#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX			0x254 0x6b8 0x000 0x1 0x0
-#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7				0x254 0x6b8 0x810 0x2 0x0
-#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5				0x254 0x6b8 0x944 0x3 0x1
-#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0		0x254 0x6b8 0x9cc 0x4 0x0
-#define MX35_PAD_SD2_DATA1__GPIO2_3				0x254 0x6b8 0x8cc 0x5 0x1
-#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2				0x258 0x6bc 0x000 0x0 0x0
-#define MX35_PAD_SD2_DATA2__UART3_RTS				0x258 0x6bc 0x99c 0x1 0x0
-#define MX35_PAD_SD2_DATA2__CAN1_RXCAN				0x258 0x6bc 0x7c8 0x2 0x1
-#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6				0x258 0x6bc 0x948 0x3 0x1
-#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1		0x258 0x6bc 0x9d0 0x4 0x0
-#define MX35_PAD_SD2_DATA2__GPIO2_4				0x258 0x6bc 0x8d0 0x5 0x1
-#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3				0x25c 0x6c0 0x000 0x0 0x0
-#define MX35_PAD_SD2_DATA3__UART3_CTS				0x25c 0x6c0 0x000 0x1 0x0
-#define MX35_PAD_SD2_DATA3__CAN1_TXCAN				0x25c 0x6c0 0x000 0x2 0x0
-#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7				0x25c 0x6c0 0x94c 0x3 0x1
-#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2		0x25c 0x6c0 0x9d4 0x4 0x0
-#define MX35_PAD_SD2_DATA3__GPIO2_5				0x25c 0x6c0 0x8d4 0x5 0x1
-#define MX35_PAD_ATA_CS0__ATA_CS0				0x260 0x6c4 0x000 0x0 0x0
-#define MX35_PAD_ATA_CS0__CSPI1_SS3				0x260 0x6c4 0x7dc 0x1 0x1
-#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1				0x260 0x6c4 0x000 0x3 0x0
-#define MX35_PAD_ATA_CS0__GPIO2_6				0x260 0x6c4 0x8d8 0x5 0x1
-#define MX35_PAD_ATA_CS0__IPU_DIAGB_0				0x260 0x6c4 0x000 0x6 0x0
-#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0		0x260 0x6c4 0x000 0x7 0x0
-#define MX35_PAD_ATA_CS1__ATA_CS1				0x264 0x6c8 0x000 0x0 0x0
-#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2				0x264 0x6c8 0x000 0x3 0x0
-#define MX35_PAD_ATA_CS1__CSPI2_SS0				0x264 0x6c8 0x7f0 0x4 0x1
-#define MX35_PAD_ATA_CS1__GPIO2_7				0x264 0x6c8 0x8dc 0x5 0x1
-#define MX35_PAD_ATA_CS1__IPU_DIAGB_1				0x264 0x6c8 0x000 0x6 0x0
-#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1		0x264 0x6c8 0x000 0x7 0x0
-#define MX35_PAD_ATA_DIOR__ATA_DIOR				0x268 0x6cc 0x000 0x0 0x0
-#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0				0x268 0x6cc 0x81c 0x1 0x1
-#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR			0x268 0x6cc 0x9c4 0x2 0x1
-#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0			0x268 0x6cc 0x000 0x3 0x0
-#define MX35_PAD_ATA_DIOR__CSPI2_SS1				0x268 0x6cc 0x7f4 0x4 0x1
-#define MX35_PAD_ATA_DIOR__GPIO2_8				0x268 0x6cc 0x8e0 0x5 0x1
-#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2				0x268 0x6cc 0x000 0x6 0x0
-#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2		0x268 0x6cc 0x000 0x7 0x0
-#define MX35_PAD_ATA_DIOW__ATA_DIOW				0x26c 0x6d0 0x000 0x0 0x0
-#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1				0x26c 0x6d0 0x820 0x1 0x1
-#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP			0x26c 0x6d0 0x000 0x2 0x0
-#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1			0x26c 0x6d0 0x000 0x3 0x0
-#define MX35_PAD_ATA_DIOW__CSPI2_MOSI				0x26c 0x6d0 0x7ec 0x4 0x2
-#define MX35_PAD_ATA_DIOW__GPIO2_9				0x26c 0x6d0 0x8e4 0x5 0x1
-#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3				0x26c 0x6d0 0x000 0x6 0x0
-#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3		0x26c 0x6d0 0x000 0x7 0x0
-#define MX35_PAD_ATA_DMACK__ATA_DMACK				0x270 0x6d4 0x000 0x0 0x0
-#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2				0x270 0x6d4 0x824 0x1 0x1
-#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT			0x270 0x6d4 0x9c8 0x2 0x1
-#define MX35_PAD_ATA_DMACK__CSPI2_MISO				0x270 0x6d4 0x7e8 0x4 0x2
-#define MX35_PAD_ATA_DMACK__GPIO2_10				0x270 0x6d4 0x86c 0x5 0x1
-#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4				0x270 0x6d4 0x000 0x6 0x0
-#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0		0x270 0x6d4 0x000 0x7 0x0
-#define MX35_PAD_ATA_RESET_B__ATA_RESET_B			0x274 0x6d8 0x000 0x0 0x0
-#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3			0x274 0x6d8 0x828 0x1 0x1
-#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0		0x274 0x6d8 0x9a4 0x2 0x1
-#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O			0x274 0x6d8 0x000 0x3 0x0
-#define MX35_PAD_ATA_RESET_B__CSPI2_RDY				0x274 0x6d8 0x7e4 0x4 0x2
-#define MX35_PAD_ATA_RESET_B__GPIO2_11				0x274 0x6d8 0x870 0x5 0x1
-#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5			0x274 0x6d8 0x000 0x6 0x0
-#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1		0x274 0x6d8 0x000 0x7 0x0
-#define MX35_PAD_ATA_IORDY__ATA_IORDY				0x278 0x6dc 0x000 0x0 0x0
-#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4				0x278 0x6dc 0x000 0x1 0x0
-#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1		0x278 0x6dc 0x9a8 0x2 0x1
-#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO			0x278 0x6dc 0x92c 0x3 0x3
-#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4				0x278 0x6dc 0x000 0x4 0x0
-#define MX35_PAD_ATA_IORDY__GPIO2_12				0x278 0x6dc 0x874 0x5 0x1
-#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6				0x278 0x6dc 0x000 0x6 0x0
-#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2		0x278 0x6dc 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA0__ATA_DATA_0				0x27c 0x6e0 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5				0x27c 0x6e0 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2		0x27c 0x6e0 0x9ac 0x2 0x1
-#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC			0x27c 0x6e0 0x928 0x3 0x4
-#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5				0x27c 0x6e0 0x000 0x4 0x0
-#define MX35_PAD_ATA_DATA0__GPIO2_13				0x27c 0x6e0 0x878 0x5 0x1
-#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7				0x27c 0x6e0 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3		0x27c 0x6e0 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA1__ATA_DATA_1				0x280 0x6e4 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6				0x280 0x6e4 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3		0x280 0x6e4 0x9b0 0x2 0x1
-#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK			0x280 0x6e4 0x000 0x3 0x0
-#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6				0x280 0x6e4 0x000 0x4 0x0
-#define MX35_PAD_ATA_DATA1__GPIO2_14				0x280 0x6e4 0x87c 0x5 0x1
-#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8				0x280 0x6e4 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27			0x280 0x6e4 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA2__ATA_DATA_2				0x284 0x6e8 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7				0x284 0x6e8 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4		0x284 0x6e8 0x9b4 0x2 0x1
-#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS			0x284 0x6e8 0x000 0x3 0x0
-#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7				0x284 0x6e8 0x000 0x4 0x0
-#define MX35_PAD_ATA_DATA2__GPIO2_15				0x284 0x6e8 0x880 0x5 0x1
-#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9				0x284 0x6e8 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28			0x284 0x6e8 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA3__ATA_DATA_3				0x288 0x6ec 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA3__ESDHC3_CLK				0x288 0x6ec 0x814 0x1 0x1
-#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		0x288 0x6ec 0x9b8 0x2 0x1
-#define MX35_PAD_ATA_DATA3__CSPI2_SCLK				0x288 0x6ec 0x7e0 0x4 0x2
-#define MX35_PAD_ATA_DATA3__GPIO2_16				0x288 0x6ec 0x884 0x5 0x1
-#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10			0x288 0x6ec 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			0x288 0x6ec 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA4__ATA_DATA_4				0x28c 0x6f0 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA4__ESDHC3_CMD				0x28c 0x6f0 0x818 0x1 0x1
-#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6		0x28c 0x6f0 0x9bc 0x2 0x1
-#define MX35_PAD_ATA_DATA4__GPIO2_17				0x28c 0x6f0 0x888 0x5 0x1
-#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11			0x28c 0x6f0 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30			0x28c 0x6f0 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA5__ATA_DATA_5				0x290 0x6f4 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7		0x290 0x6f4 0x9c0 0x2 0x1
-#define MX35_PAD_ATA_DATA5__GPIO2_18				0x290 0x6f4 0x88c 0x5 0x1
-#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12			0x290 0x6f4 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31			0x290 0x6f4 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA6__ATA_DATA_6				0x294 0x6f8 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA6__CAN1_TXCAN				0x294 0x6f8 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA6__UART1_DTR				0x294 0x6f8 0x000 0x2 0x0
-#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD			0x294 0x6f8 0x7b4 0x3 0x0
-#define MX35_PAD_ATA_DATA6__GPIO2_19				0x294 0x6f8 0x890 0x5 0x1
-#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13			0x294 0x6f8 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA7__ATA_DATA_7				0x298 0x6fc 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA7__CAN1_RXCAN				0x298 0x6fc 0x7c8 0x1 0x2
-#define MX35_PAD_ATA_DATA7__UART1_DSR				0x298 0x6fc 0x000 0x2 0x0
-#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD			0x298 0x6fc 0x7b0 0x3 0x0
-#define MX35_PAD_ATA_DATA7__GPIO2_20				0x298 0x6fc 0x898 0x5 0x1
-#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14			0x298 0x6fc 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA8__ATA_DATA_8				0x29c 0x700 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA8__UART3_RTS				0x29c 0x700 0x99c 0x1 0x1
-#define MX35_PAD_ATA_DATA8__UART1_RI				0x29c 0x700 0x000 0x2 0x0
-#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC			0x29c 0x700 0x7c0 0x3 0x0
-#define MX35_PAD_ATA_DATA8__GPIO2_21				0x29c 0x700 0x89c 0x5 0x1
-#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15			0x29c 0x700 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA9__ATA_DATA_9				0x2a0 0x704 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA9__UART3_CTS				0x2a0 0x704 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA9__UART1_DCD				0x2a0 0x704 0x000 0x2 0x0
-#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS			0x2a0 0x704 0x7c4 0x3 0x0
-#define MX35_PAD_ATA_DATA9__GPIO2_22				0x2a0 0x704 0x8a0 0x5 0x1
-#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16			0x2a0 0x704 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA10__ATA_DATA_10			0x2a4 0x708 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX			0x2a4 0x708 0x9a0 0x1 0x2
-#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC			0x2a4 0x708 0x7b8 0x3 0x0
-#define MX35_PAD_ATA_DATA10__GPIO2_23				0x2a4 0x708 0x8a4 0x5 0x1
-#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17			0x2a4 0x708 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA11__ATA_DATA_11			0x2a8 0x70c 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX			0x2a8 0x70c 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS			0x2a8 0x70c 0x7bc 0x3 0x0
-#define MX35_PAD_ATA_DATA11__GPIO2_24				0x2a8 0x70c 0x8a8 0x5 0x1
-#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18			0x2a8 0x70c 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA12__ATA_DATA_12			0x2ac 0x710 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA12__I2C3_SCL				0x2ac 0x710 0x91c 0x1 0x3
-#define MX35_PAD_ATA_DATA12__GPIO2_25				0x2ac 0x710 0x8ac 0x5 0x1
-#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19			0x2ac 0x710 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA13__ATA_DATA_13			0x2b0 0x714 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA13__I2C3_SDA				0x2b0 0x714 0x920 0x1 0x3
-#define MX35_PAD_ATA_DATA13__GPIO2_26				0x2b0 0x714 0x8b0 0x5 0x1
-#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20			0x2b0 0x714 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA14__ATA_DATA_14			0x2b4 0x718 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0			0x2b4 0x718 0x930 0x1 0x2
-#define MX35_PAD_ATA_DATA14__KPP_ROW_0				0x2b4 0x718 0x970 0x3 0x2
-#define MX35_PAD_ATA_DATA14__GPIO2_27				0x2b4 0x718 0x8b4 0x5 0x1
-#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21			0x2b4 0x718 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA15__ATA_DATA_15			0x2b8 0x71c 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1			0x2b8 0x71c 0x934 0x1 0x2
-#define MX35_PAD_ATA_DATA15__KPP_ROW_1				0x2b8 0x71c 0x974 0x3 0x2
-#define MX35_PAD_ATA_DATA15__GPIO2_28				0x2b8 0x71c 0x8b8 0x5 0x1
-#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22			0x2b8 0x71c 0x000 0x6 0x0
-#define MX35_PAD_ATA_INTRQ__ATA_INTRQ				0x2bc 0x720 0x000 0x0 0x0
-#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2				0x2bc 0x720 0x938 0x1 0x3
-#define MX35_PAD_ATA_INTRQ__KPP_ROW_2				0x2bc 0x720 0x978 0x3 0x2
-#define MX35_PAD_ATA_INTRQ__GPIO2_29				0x2bc 0x720 0x8bc 0x5 0x1
-#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23			0x2bc 0x720 0x000 0x6 0x0
-#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN			0x2c0 0x724 0x000 0x0 0x0
-#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3			0x2c0 0x724 0x93c 0x1 0x3
-#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3				0x2c0 0x724 0x97c 0x3 0x2
-#define MX35_PAD_ATA_BUFF_EN__GPIO2_30				0x2c0 0x724 0x8c4 0x5 0x1
-#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24			0x2c0 0x724 0x000 0x6 0x0
-#define MX35_PAD_ATA_DMARQ__ATA_DMARQ				0x2c4 0x728 0x000 0x0 0x0
-#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4				0x2c4 0x728 0x940 0x1 0x2
-#define MX35_PAD_ATA_DMARQ__KPP_COL_0				0x2c4 0x728 0x950 0x3 0x2
-#define MX35_PAD_ATA_DMARQ__GPIO2_31				0x2c4 0x728 0x8c8 0x5 0x1
-#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25			0x2c4 0x728 0x000 0x6 0x0
-#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4			0x2c4 0x728 0x000 0x7 0x0
-#define MX35_PAD_ATA_DA0__ATA_DA_0				0x2c8 0x72c 0x000 0x0 0x0
-#define MX35_PAD_ATA_DA0__IPU_CSI_D_5				0x2c8 0x72c 0x944 0x1 0x2
-#define MX35_PAD_ATA_DA0__KPP_COL_1				0x2c8 0x72c 0x954 0x3 0x2
-#define MX35_PAD_ATA_DA0__GPIO3_0				0x2c8 0x72c 0x8e8 0x5 0x1
-#define MX35_PAD_ATA_DA0__IPU_DIAGB_26				0x2c8 0x72c 0x000 0x6 0x0
-#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5			0x2c8 0x72c 0x000 0x7 0x0
-#define MX35_PAD_ATA_DA1__ATA_DA_1				0x2cc 0x730 0x000 0x0 0x0
-#define MX35_PAD_ATA_DA1__IPU_CSI_D_6				0x2cc 0x730 0x948 0x1 0x2
-#define MX35_PAD_ATA_DA1__KPP_COL_2				0x2cc 0x730 0x958 0x3 0x2
-#define MX35_PAD_ATA_DA1__GPIO3_1				0x2cc 0x730 0x000 0x5 0x0
-#define MX35_PAD_ATA_DA1__IPU_DIAGB_27				0x2cc 0x730 0x000 0x6 0x0
-#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6			0x2cc 0x730 0x000 0x7 0x0
-#define MX35_PAD_ATA_DA2__ATA_DA_2				0x2d0 0x734 0x000 0x0 0x0
-#define MX35_PAD_ATA_DA2__IPU_CSI_D_7				0x2d0 0x734 0x94c 0x1 0x2
-#define MX35_PAD_ATA_DA2__KPP_COL_3				0x2d0 0x734 0x95c 0x3 0x2
-#define MX35_PAD_ATA_DA2__GPIO3_2				0x2d0 0x734 0x000 0x5 0x0
-#define MX35_PAD_ATA_DA2__IPU_DIAGB_28				0x2d0 0x734 0x000 0x6 0x0
-#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7			0x2d0 0x734 0x000 0x7 0x0
-#define MX35_PAD_MLB_CLK__MLB_MLBCLK				0x2d4 0x738 0x000 0x0 0x0
-#define MX35_PAD_MLB_CLK__GPIO3_3				0x2d4 0x738 0x000 0x5 0x0
-#define MX35_PAD_MLB_DAT__MLB_MLBDAT				0x2d8 0x73c 0x000 0x0 0x0
-#define MX35_PAD_MLB_DAT__GPIO3_4				0x2d8 0x73c 0x904 0x5 0x1
-#define MX35_PAD_MLB_SIG__MLB_MLBSIG				0x2dc 0x740 0x000 0x0 0x0
-#define MX35_PAD_MLB_SIG__GPIO3_5				0x2dc 0x740 0x908 0x5 0x1
-#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK				0x2e0 0x744 0x000 0x0 0x0
-#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4			0x2e0 0x744 0x804 0x1 0x1
-#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX			0x2e0 0x744 0x9a0 0x2 0x3
-#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR			0x2e0 0x744 0x9ec 0x3 0x1
-#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI				0x2e0 0x744 0x7ec 0x4 0x3
-#define MX35_PAD_FEC_TX_CLK__GPIO3_6				0x2e0 0x744 0x90c 0x5 0x1
-#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC		0x2e0 0x744 0x928 0x6 0x5
-#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0		0x2e0 0x744 0x000 0x7 0x0
-#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK				0x2e4 0x748 0x000 0x0 0x0
-#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5			0x2e4 0x748 0x808 0x1 0x1
-#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX			0x2e4 0x748 0x000 0x2 0x0
-#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP			0x2e4 0x748 0x000 0x3 0x0
-#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO				0x2e4 0x748 0x7e8 0x4 0x3
-#define MX35_PAD_FEC_RX_CLK__GPIO3_7				0x2e4 0x748 0x910 0x5 0x1
-#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I			0x2e4 0x748 0x92c 0x6 0x4
-#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1		0x2e4 0x748 0x000 0x7 0x0
-#define MX35_PAD_FEC_RX_DV__FEC_RX_DV				0x2e8 0x74c 0x000 0x0 0x0
-#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6				0x2e8 0x74c 0x80c 0x1 0x1
-#define MX35_PAD_FEC_RX_DV__UART3_RTS				0x2e8 0x74c 0x99c 0x2 0x2
-#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT			0x2e8 0x74c 0x9f0 0x3 0x1
-#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK				0x2e8 0x74c 0x7e0 0x4 0x3
-#define MX35_PAD_FEC_RX_DV__GPIO3_8				0x2e8 0x74c 0x914 0x5 0x1
-#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK			0x2e8 0x74c 0x000 0x6 0x0
-#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2		0x2e8 0x74c 0x000 0x7 0x0
-#define MX35_PAD_FEC_COL__FEC_COL				0x2ec 0x750 0x000 0x0 0x0
-#define MX35_PAD_FEC_COL__ESDHC1_DAT7				0x2ec 0x750 0x810 0x1 0x1
-#define MX35_PAD_FEC_COL__UART3_CTS				0x2ec 0x750 0x000 0x2 0x0
-#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0			0x2ec 0x750 0x9cc 0x3 0x1
-#define MX35_PAD_FEC_COL__CSPI2_RDY				0x2ec 0x750 0x7e4 0x4 0x3
-#define MX35_PAD_FEC_COL__GPIO3_9				0x2ec 0x750 0x918 0x5 0x1
-#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS			0x2ec 0x750 0x000 0x6 0x0
-#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3			0x2ec 0x750 0x000 0x7 0x0
-#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0			0x2f0 0x754 0x000 0x0 0x0
-#define MX35_PAD_FEC_RDATA0__PWM_PWMO				0x2f0 0x754 0x000 0x1 0x0
-#define MX35_PAD_FEC_RDATA0__UART3_DTR				0x2f0 0x754 0x000 0x2 0x0
-#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1		0x2f0 0x754 0x9d0 0x3 0x1
-#define MX35_PAD_FEC_RDATA0__CSPI2_SS0				0x2f0 0x754 0x7f0 0x4 0x2
-#define MX35_PAD_FEC_RDATA0__GPIO3_10				0x2f0 0x754 0x8ec 0x5 0x1
-#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1			0x2f0 0x754 0x000 0x6 0x0
-#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4		0x2f0 0x754 0x000 0x7 0x0
-#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0			0x2f4 0x758 0x000 0x0 0x0
-#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1			0x2f4 0x758 0x000 0x1 0x0
-#define MX35_PAD_FEC_TDATA0__UART3_DSR				0x2f4 0x758 0x000 0x2 0x0
-#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2		0x2f4 0x758 0x9d4 0x3 0x1
-#define MX35_PAD_FEC_TDATA0__CSPI2_SS1				0x2f4 0x758 0x7f4 0x4 0x2
-#define MX35_PAD_FEC_TDATA0__GPIO3_11				0x2f4 0x758 0x8f0 0x5 0x1
-#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0			0x2f4 0x758 0x000 0x6 0x0
-#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5		0x2f4 0x758 0x000 0x7 0x0
-#define MX35_PAD_FEC_TX_EN__FEC_TX_EN				0x2f8 0x75c 0x000 0x0 0x0
-#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1			0x2f8 0x75c 0x998 0x1 0x3
-#define MX35_PAD_FEC_TX_EN__UART3_RI				0x2f8 0x75c 0x000 0x2 0x0
-#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3		0x2f8 0x75c 0x9d8 0x3 0x1
-#define MX35_PAD_FEC_TX_EN__GPIO3_12				0x2f8 0x75c 0x8f4 0x5 0x1
-#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS			0x2f8 0x75c 0x000 0x6 0x0
-#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6		0x2f8 0x75c 0x000 0x7 0x0
-#define MX35_PAD_FEC_MDC__FEC_MDC				0x2fc 0x760 0x000 0x0 0x0
-#define MX35_PAD_FEC_MDC__CAN2_TXCAN				0x2fc 0x760 0x000 0x1 0x0
-#define MX35_PAD_FEC_MDC__UART3_DCD				0x2fc 0x760 0x000 0x2 0x0
-#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4			0x2fc 0x760 0x9dc 0x3 0x1
-#define MX35_PAD_FEC_MDC__GPIO3_13				0x2fc 0x760 0x8f8 0x5 0x1
-#define MX35_PAD_FEC_MDC__IPU_DISPB_WR				0x2fc 0x760 0x000 0x6 0x0
-#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7			0x2fc 0x760 0x000 0x7 0x0
-#define MX35_PAD_FEC_MDIO__FEC_MDIO				0x300 0x764 0x000 0x0 0x0
-#define MX35_PAD_FEC_MDIO__CAN2_RXCAN				0x300 0x764 0x7cc 0x1 0x2
-#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5			0x300 0x764 0x9e0 0x3 0x1
-#define MX35_PAD_FEC_MDIO__GPIO3_14				0x300 0x764 0x8fc 0x5 0x1
-#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD				0x300 0x764 0x000 0x6 0x0
-#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8			0x300 0x764 0x000 0x7 0x0
-#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR				0x304 0x768 0x000 0x0 0x0
-#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE				0x304 0x768 0x990 0x1 0x2
-#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK			0x304 0x768 0x994 0x2 0x4
-#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6		0x304 0x768 0x9e4 0x3 0x1
-#define MX35_PAD_FEC_TX_ERR__GPIO3_15				0x304 0x768 0x900 0x5 0x1
-#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC			0x304 0x768 0x924 0x6 0x3
-#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9		0x304 0x768 0x000 0x7 0x0
-#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR				0x308 0x76c 0x000 0x0 0x0
-#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0			0x308 0x76c 0x930 0x1 0x3
-#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7		0x308 0x76c 0x9e8 0x3 0x1
-#define MX35_PAD_FEC_RX_ERR__KPP_COL_4				0x308 0x76c 0x960 0x4 0x1
-#define MX35_PAD_FEC_RX_ERR__GPIO3_16				0x308 0x76c 0x000 0x5 0x0
-#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO			0x308 0x76c 0x92c 0x6 0x5
-#define MX35_PAD_FEC_CRS__FEC_CRS				0x30c 0x770 0x000 0x0 0x0
-#define MX35_PAD_FEC_CRS__IPU_CSI_D_1				0x30c 0x770 0x934 0x1 0x3
-#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR			0x30c 0x770 0x000 0x3 0x0
-#define MX35_PAD_FEC_CRS__KPP_COL_5				0x30c 0x770 0x964 0x4 0x1
-#define MX35_PAD_FEC_CRS__GPIO3_17				0x30c 0x770 0x000 0x5 0x0
-#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE			0x30c 0x770 0x000 0x6 0x0
-#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1			0x310 0x774 0x000 0x0 0x0
-#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2			0x310 0x774 0x938 0x1 0x4
-#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC			0x310 0x774 0x000 0x2 0x0
-#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC			0x310 0x774 0x9f4 0x3 0x2
-#define MX35_PAD_FEC_RDATA1__KPP_COL_6				0x310 0x774 0x968 0x4 0x1
-#define MX35_PAD_FEC_RDATA1__GPIO3_18				0x310 0x774 0x000 0x5 0x0
-#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0			0x310 0x774 0x000 0x6 0x0
-#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1			0x314 0x778 0x000 0x0 0x0
-#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3			0x314 0x778 0x93c 0x1 0x4
-#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS			0x314 0x778 0x7bc 0x2 0x1
-#define MX35_PAD_FEC_TDATA1__KPP_COL_7				0x314 0x778 0x96c 0x4 0x1
-#define MX35_PAD_FEC_TDATA1__GPIO3_19				0x314 0x778 0x000 0x5 0x0
-#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1			0x314 0x778 0x000 0x6 0x0
-#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2			0x318 0x77c 0x000 0x0 0x0
-#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4			0x318 0x77c 0x940 0x1 0x3
-#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD			0x318 0x77c 0x7b4 0x2 0x1
-#define MX35_PAD_FEC_RDATA2__KPP_ROW_4				0x318 0x77c 0x980 0x4 0x1
-#define MX35_PAD_FEC_RDATA2__GPIO3_20				0x318 0x77c 0x000 0x5 0x0
-#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2			0x31c 0x780 0x000 0x0 0x0
-#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5			0x31c 0x780 0x944 0x1 0x3
-#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD			0x31c 0x780 0x7b0 0x2 0x1
-#define MX35_PAD_FEC_TDATA2__KPP_ROW_5				0x31c 0x780 0x984 0x4 0x1
-#define MX35_PAD_FEC_TDATA2__GPIO3_21				0x31c 0x780 0x000 0x5 0x0
-#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3			0x320 0x784 0x000 0x0 0x0
-#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6			0x320 0x784 0x948 0x1 0x3
-#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC			0x320 0x784 0x7c0 0x2 0x1
-#define MX35_PAD_FEC_RDATA3__KPP_ROW_6				0x320 0x784 0x988 0x4 0x1
-#define MX35_PAD_FEC_RDATA3__GPIO3_22				0x320 0x784 0x000 0x6 0x0
-#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3			0x324 0x788 0x000 0x0 0x0
-#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7			0x324 0x788 0x94c 0x1 0x3
-#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS			0x324 0x788 0x7c4 0x2 0x1
-#define MX35_PAD_FEC_TDATA3__KPP_ROW_7				0x324 0x788 0x98c 0x4 0x1
-#define MX35_PAD_FEC_TDATA3__GPIO3_23				0x324 0x788 0x000 0x5 0x0
-#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK			0x000 0x78c 0x000 0x0 0x0
-#define MX35_PAD_TEST_MODE__TCU_TEST_MODE			0x000 0x790 0x000 0x0 0x0
-
-#endif /* __DTS_IMX35_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
deleted file mode 100644
index d650f54c3fc6b..0000000000000
--- a/arch/arm/boot/dts/imx35.dtsi
+++ /dev/null
@@ -1,414 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2012 Steffen Trumtrar, Pengutronix
-//
-// based on imx27.dtsi
-
-#include "imx35-pinfunc.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		mmc0 = &esdhc1;
-		mmc1 = &esdhc2;
-		mmc2 = &esdhc3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		spi0 = &spi1;
-		spi1 = &spi2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm1136jf-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	avic: avic-interrupt-controller@68000000 {
-		compatible = "fsl,imx35-avic", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x68000000 0x10000000>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&avic>;
-		ranges;
-
-		L2: cache-controller@30000000 {
-			compatible = "arm,l210-cache";
-			reg = <0x30000000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		aips1: bus@43f00000 {
-			compatible = "fsl,aips", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x43f00000 0x100000>;
-			ranges;
-
-			i2c1: i2c@43f80000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
-				reg = <0x43f80000 0x4000>;
-				clocks = <&clks 51>;
-				clock-names = "ipg_per";
-				interrupts = <10>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@43f84000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
-				reg = <0x43f84000 0x4000>;
-				clocks = <&clks 53>;
-				clock-names = "ipg_per";
-				interrupts = <3>;
-				status = "disabled";
-			};
-
-			uart1: serial@43f90000 {
-				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
-				reg = <0x43f90000 0x4000>;
-				clocks = <&clks 9>, <&clks 70>;
-				clock-names = "ipg", "per";
-				interrupts = <45>;
-				status = "disabled";
-			};
-
-			uart2: serial@43f94000 {
-				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
-				reg = <0x43f94000 0x4000>;
-				clocks = <&clks 9>, <&clks 71>;
-				clock-names = "ipg", "per";
-				interrupts = <32>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@43f98000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
-				reg = <0x43f98000 0x4000>;
-				clocks = <&clks 52>;
-				clock-names = "ipg_per";
-				interrupts = <4>;
-				status = "disabled";
-			};
-
-			ssi1: ssi@43fa0000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
-				reg = <0x43fa0000 0x4000>;
-				interrupts = <11>;
-				clocks = <&clks 68>;
-				dmas = <&sdma 28 0 0>,
-				       <&sdma 29 0 0>;
-				dma-names = "rx", "tx";
-				fsl,fifo-depth = <15>;
-				status = "disabled";
-			};
-
-			spi1: spi@43fa4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-cspi";
-				reg = <0x43fa4000 0x4000>;
-				clocks = <&clks 35 &clks 35>;
-				clock-names = "ipg", "per";
-				interrupts = <14>;
-				status = "disabled";
-			};
-
-			kpp: kpp@43fa8000 {
-				compatible = "fsl,imx35-kpp", "fsl,imx21-kpp";
-				reg = <0x43fa8000 0x4000>;
-				interrupts = <24>;
-				clocks = <&clks 56>;
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@43fac000 {
-				compatible = "fsl,imx35-iomuxc";
-				reg = <0x43fac000 0x4000>;
-			};
-		};
-
-		spba: spba-bus@50000000 {
-			compatible = "fsl,spba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x100000>;
-			ranges;
-
-			uart3: serial@5000c000 {
-				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
-				reg = <0x5000c000 0x4000>;
-				clocks = <&clks 9>, <&clks 72>;
-				clock-names = "ipg", "per";
-				interrupts = <18>;
-				status = "disabled";
-			};
-
-			spi2: spi@50010000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-cspi";
-				reg = <0x50010000 0x4000>;
-				interrupts = <13>;
-				clocks = <&clks 36 &clks 36>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			fec: ethernet@50038000 {
-				compatible = "fsl,imx35-fec", "fsl,imx27-fec";
-				reg = <0x50038000 0x4000>;
-				clocks = <&clks 46>, <&clks 8>;
-				clock-names = "ipg", "ahb";
-				interrupts = <57>;
-				status = "disabled";
-			};
-		};
-
-		aips2: bus@53f00000 {
-			compatible = "fsl,aips", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x53f00000 0x100000>;
-			ranges;
-
-			clks: ccm@53f80000 {
-				compatible = "fsl,imx35-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <31>;
-				#clock-cells = <1>;
-			};
-
-			gpt: timer@53f90000 {
-				compatible = "fsl,imx35-gpt", "fsl,imx31-gpt";
-				reg = <0x53f90000 0x4000>;
-				interrupts = <29>;
-				clocks = <&clks 9>, <&clks 50>;
-				clock-names = "ipg", "per";
-			};
-
-			gpio3: gpio@53fa4000 {
-				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
-				reg = <0x53fa4000 0x4000>;
-				interrupts = <56>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			esdhc1: mmc@53fb4000 {
-				compatible = "fsl,imx35-esdhc";
-				reg = <0x53fb4000 0x4000>;
-				interrupts = <7>;
-				clocks = <&clks 9>, <&clks 8>, <&clks 43>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			esdhc2: mmc@53fb8000 {
-				compatible = "fsl,imx35-esdhc";
-				reg = <0x53fb8000 0x4000>;
-				interrupts = <8>;
-				clocks = <&clks 9>, <&clks 8>, <&clks 44>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			esdhc3: mmc@53fbc000 {
-				compatible = "fsl,imx35-esdhc";
-				reg = <0x53fbc000 0x4000>;
-				interrupts = <9>;
-				clocks = <&clks 9>, <&clks 8>, <&clks 45>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			audmux: audmux@53fc4000 {
-				compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
-				reg = <0x53fc4000 0x4000>;
-				status = "disabled";
-			};
-
-			gpio1: gpio@53fcc000 {
-				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
-				reg = <0x53fcc000 0x4000>;
-				interrupts = <52>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@53fd0000 {
-				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
-				reg = <0x53fd0000 0x4000>;
-				interrupts = <51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			sdma: dma-controller@53fd4000 {
-				compatible = "fsl,imx35-sdma";
-				reg = <0x53fd4000 0x4000>;
-				clocks = <&clks 9>, <&clks 65>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				interrupts = <34>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
-			};
-
-			wdog: watchdog@53fdc000 {
-				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
-				reg = <0x53fdc000 0x4000>;
-				clocks = <&clks 74>;
-				clock-names = "";
-				interrupts = <55>;
-			};
-
-			can1: can@53fe4000 {
-				compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
-				reg = <0x53fe4000 0x1000>;
-				clocks = <&clks 33>, <&clks 33>;
-				clock-names = "ipg", "per";
-				interrupts = <43>;
-				status = "disabled";
-			};
-
-			can2: can@53fe8000 {
-				compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
-				reg = <0x53fe8000 0x1000>;
-				clocks = <&clks 34>, <&clks 34>;
-				clock-names = "ipg", "per";
-				interrupts = <44>;
-				status = "disabled";
-			};
-
-			efuse@53ff0000 {
-				compatible = "fsl,imx35-iim";
-				reg = <0x53ff0000 0x4000>;
-				interrupts = <19>;
-				clocks = <&clks 80>;
-			};
-
-			usbotg: usb@53ff4000 {
-				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
-				reg = <0x53ff4000 0x0200>;
-				interrupts = <37>;
-				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
-				clock-names = "ipg", "ahb", "per";
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,usbphy = <&usbphy0>;
-				status = "disabled";
-			};
-
-			usbhost1: usb@53ff4400 {
-				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
-				reg = <0x53ff4400 0x0200>;
-				interrupts = <35>;
-				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
-				clock-names = "ipg", "ahb", "per";
-				fsl,usbmisc = <&usbmisc 1>;
-				fsl,usbphy = <&usbphy1>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@53ff4600 {
-				#index-cells = <1>;
-				compatible = "fsl,imx35-usbmisc";
-				reg = <0x53ff4600 0x00f>;
-			};
-		};
-
-		emi@80000000 { /* External Memory Interface */
-			compatible = "fsl,emi", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x40000000>;
-			ranges;
-
-			nfc: nand@bb000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
-				reg = <0xbb000000 0x2000>;
-				clocks = <&clks 29>;
-				clock-names = "";
-				interrupts = <33>;
-				status = "disabled";
-			};
-
-			weim: weim@b8002000 {
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clocks = <&clks 0>;
-				compatible = "fsl,imx35-weim", "fsl,imx27-weim";
-				reg = <0xb8002000 0x1000>;
-				ranges = <
-					0 0 0xa0000000 0x8000000
-					1 0 0xa8000000 0x8000000
-					2 0 0xb0000000 0x2000000
-					3 0 0xb2000000 0x2000000
-					4 0 0xb4000000 0x2000000
-					5 0 0xb6000000 0x2000000
-				>;
-				status = "disabled";
-			};
-		};
-	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usb-phy@0 {
-			reg = <0>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-
-		usbphy1: usb-phy@1 {
-			reg = <1>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
deleted file mode 100644
index 4ea5c23f181b4..0000000000000
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-#include "imx50.dtsi"
-
-/ {
-	model = "Freescale i.MX50 Evaluation Kit";
-	compatible = "fsl,imx50-evk", "fsl,imx50";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x80000000>;
-	};
-};
-
-&cspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi>;
-	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash: m25p32@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p32", "jedec,spi-nor";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0x100000>;
-			read-only;
-		};
-
-		partition@100000 {
-			label = "kernel";
-			reg = <0x100000 0x300000>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx50-evk {
-		pinctrl_cspi: cspigrp {
-			fsl,pins = <
-				MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
-				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
-				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
-				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
-				MX50_PAD_ECSPI1_MOSI__GPIO4_13		0x84
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX50_PAD_SSI_RXFS__FEC_MDC		0x80
-				MX50_PAD_SSI_RXC__FEC_MDIO		0x80
-				MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
-				MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
-				MX50_PAD_DISP_D2__FEC_RX_DV		0x80
-				MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
-				MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
-				MX50_PAD_DISP_D5__FEC_TX_EN		0x80
-				MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
-				MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
-				MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
-				MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
-				MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts
deleted file mode 100644
index 467db6b4ed7f8..0000000000000
--- a/arch/arm/boot/dts/imx50-kobo-aura.dts
+++ /dev/null
@@ -1,287 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright 2019 Jonathan Neuschäfer
-//
-// The Kobo Aura e-book reader, model N514. The mainboard is marked as E606F0B.
-
-/dts-v1/;
-#include "imx50.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Kobo Aura (N514)";
-	compatible = "kobo,aura", "fsl,imx50";
-
-	chosen {
-		stdout-path = "serial1:115200n8";
-	};
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x10000000>;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-on {
-			label = "kobo_aura:orange:on";
-			gpios = <&gpio6 24 GPIO_ACTIVE_LOW>;
-			panic-indicator;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		key-power {
-			label = "Power Button";
-			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-
-		event-hallsensor {
-			label = "Hallsensor";
-			gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESERVED>;
-			linux,input-type = <EV_SW>;
-		};
-
-		event-frontlight {
-			label = "Frontlight";
-			gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_DISPLAYTOGGLE>;
-		};
-	};
-
-	sd2_pwrseq: pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sd2_reset>;
-		reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
-	};
-
-	sd2_vmmc: gpio-regulator {
-		compatible = "regulator-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sd2_vmmc>;
-		regulator-name = "vmmc";
-		states = <3300000 0>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-gpio = <&gpio4 12 GPIO_ACTIVE_LOW>;
-		startup-delay-us = <100000>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sd1>;
-	max-frequency = <50000000>;
-	bus-width = <4>;
-	cd-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	status = "okay";
-
-	/* External µSD card */
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sd2>;
-	bus-width = <4>;
-	max-frequency = <50000000>;
-	disable-wp;
-	mmc-pwrseq = <&sd2_pwrseq>;
-	vmmc-supply = <&sd2_vmmc>;
-	status = "okay";
-
-	/* CyberTan WC121 SDIO WiFi (BCM43362) */
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sd3>;
-	bus-width = <8>;
-	non-removable;
-	max-frequency = <50000000>;
-	disable-wp;
-	status = "okay";
-
-	/* Internal eMMC */
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	touchscreen@15 {
-		reg = <0x15>;
-		compatible = "elan,ektf2132";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ts>;
-		power-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
-		interrupts-extended = <&gpio5 13 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	embedded-controller@43 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ec>;
-		compatible = "netronix,ntxec";
-		reg = <0x43>;
-		system-power-controller;
-		interrupts-extended = <&gpio4 11 IRQ_TYPE_EDGE_FALLING>;
-		#pwm-cells = <2>;
-	};
-};
-
-&iomuxc {
-	pinctrl_ec: ecgrp {
-		fsl,pins = <
-			MX50_PAD_CSPI_SS0__GPIO4_11		0x0	/* INT */
-		>;
-	};
-
-	pinctrl_gpiokeys: gpiokeysgrp {
-		fsl,pins = <
-			MX50_PAD_CSPI_MISO__GPIO4_10		0x0
-			MX50_PAD_SD2_D7__GPIO5_15		0x0
-			MX50_PAD_KEY_ROW0__GPIO4_1		0x0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX50_PAD_I2C1_SCL__I2C1_SCL		0x400001fd
-			MX50_PAD_I2C1_SDA__I2C1_SDA		0x400001fd
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX50_PAD_I2C2_SCL__I2C2_SCL		0x400001fd
-			MX50_PAD_I2C2_SDA__I2C2_SDA		0x400001fd
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX50_PAD_I2C3_SCL__I2C3_SCL		0x400001fd
-			MX50_PAD_I2C3_SDA__I2C3_SDA		0x400001fd
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			MX50_PAD_PWM1__GPIO6_24			0x0
-		>;
-	};
-
-	pinctrl_sd1: sd1grp {
-		fsl,pins = <
-			MX50_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
-			MX50_PAD_SD1_CLK__ESDHC1_CLK		0xd4
-			MX50_PAD_SD1_D0__ESDHC1_DAT0		0x1d4
-			MX50_PAD_SD1_D1__ESDHC1_DAT1		0x1d4
-			MX50_PAD_SD1_D2__ESDHC1_DAT2		0x1d4
-			MX50_PAD_SD1_D3__ESDHC1_DAT3		0x1d4
-
-			MX50_PAD_SD2_CD__GPIO5_17		0x0
-		>;
-	};
-
-	pinctrl_sd2: sd2grp {
-		fsl,pins = <
-			MX50_PAD_SD2_CMD__ESDHC2_CMD		0x1e4
-			MX50_PAD_SD2_CLK__ESDHC2_CLK		0xd4
-			MX50_PAD_SD2_D0__ESDHC2_DAT0		0x1d4
-			MX50_PAD_SD2_D1__ESDHC2_DAT1		0x1d4
-			MX50_PAD_SD2_D2__ESDHC2_DAT2		0x1d4
-			MX50_PAD_SD2_D3__ESDHC2_DAT3		0x1d4
-		>;
-	};
-
-	pinctrl_sd2_reset: sd2-resetgrp {
-		fsl,pins = <
-			MX50_PAD_ECSPI2_MOSI__GPIO4_17		0x0
-		>;
-	};
-
-	pinctrl_sd2_vmmc: sd2-vmmcgrp {
-		fsl,pins = <
-			MX50_PAD_ECSPI1_SCLK__GPIO4_12		0x0
-		>;
-	};
-
-	pinctrl_sd3: sd3grp {
-		fsl,pins = <
-			MX50_PAD_SD3_CMD__ESDHC3_CMD		0x1e4
-			MX50_PAD_SD3_CLK__ESDHC3_CLK		0xd4
-			MX50_PAD_SD3_D0__ESDHC3_DAT0		0x1d4
-			MX50_PAD_SD3_D1__ESDHC3_DAT1		0x1d4
-			MX50_PAD_SD3_D2__ESDHC3_DAT2		0x1d4
-			MX50_PAD_SD3_D3__ESDHC3_DAT3		0x1d4
-			MX50_PAD_SD3_D4__ESDHC3_DAT4		0x1d4
-			MX50_PAD_SD3_D5__ESDHC3_DAT5		0x1d4
-			MX50_PAD_SD3_D6__ESDHC3_DAT6		0x1d4
-			MX50_PAD_SD3_D7__ESDHC3_DAT7		0x1d4
-		>;
-	};
-
-	pinctrl_ts: tsgrp {
-		fsl,pins = <
-			MX50_PAD_CSPI_MOSI__GPIO4_9		0x0
-			MX50_PAD_SD2_D5__GPIO5_13		0x0
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX50_PAD_UART2_TXD__UART2_TXD_MUX	0x1e4
-			MX50_PAD_UART2_RXD__UART2_RXD_MUX	0x1e4
-		>;
-	};
-
-	pinctrl_usbphy: usbphygrp {
-		fsl,pins = <
-			MX50_PAD_ECSPI2_SS0__GPIO4_19		0x0
-		>;
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi_wide";
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usbphy0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbphy>;
-	vbus-detect-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/imx50-pinfunc.h
deleted file mode 100644
index 5e6b302475434..0000000000000
--- a/arch/arm/boot/dts/imx50-pinfunc.h
+++ /dev/null
@@ -1,919 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
- */
-
-#ifndef __DTS_IMX50_PINFUNC_H
-#define __DTS_IMX50_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX50_PAD_KEY_COL0__KPP_COL_0				0x020 0x2cc 0x000 0x0 0x0
-#define MX50_PAD_KEY_COL0__GPIO4_0				0x020 0x2cc 0x000 0x1 0x0
-#define MX50_PAD_KEY_COL0__EIM_NANDF_CLE			0x020 0x2cc 0x000 0x2 0x0
-#define MX50_PAD_KEY_COL0__CTI_TRIGIN7				0x020 0x2cc 0x000 0x6 0x0
-#define MX50_PAD_KEY_COL0__USBPHY1_TXREADY			0x020 0x2cc 0x000 0x7 0x0
-#define MX50_PAD_KEY_ROW0__KPP_ROW_0				0x024 0x2d0 0x000 0x0 0x0
-#define MX50_PAD_KEY_ROW0__GPIO4_1				0x024 0x2d0 0x000 0x1 0x0
-#define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE			0x024 0x2d0 0x000 0x2 0x0
-#define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7			0x024 0x2d0 0x000 0x6 0x0
-#define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID			0x024 0x2d0 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL1__KPP_COL_1				0x028 0x2d4 0x000 0x0 0x0
-#define MX50_PAD_KEY_COL1__GPIO4_2				0x028 0x2d4 0x000 0x1 0x0
-#define MX50_PAD_KEY_COL1__EIM_NANDF_CEN_0			0x028 0x2d4 0x000 0x2 0x0
-#define MX50_PAD_KEY_COL1__CTI_TRIGOUT_ACK6			0x028 0x2d4 0x000 0x6 0x0
-#define MX50_PAD_KEY_COL1__USBPHY1_RXACTIVE			0x028 0x2d4 0x000 0x7 0x0
-#define MX50_PAD_KEY_ROW1__KPP_ROW_1				0x02c 0x2d8 0x000 0x0 0x0
-#define MX50_PAD_KEY_ROW1__GPIO4_3				0x02c 0x2d8 0x000 0x1 0x0
-#define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1			0x02c 0x2d8 0x000 0x2 0x0
-#define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7			0x02c 0x2d8 0x000 0x6 0x0
-#define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR			0x02c 0x2d8 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL2__KPP_COL_2				0x030 0x2dc 0x000 0x0 0x0
-#define MX50_PAD_KEY_COL2__GPIO4_4				0x030 0x2dc 0x000 0x1 0x0
-#define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2			0x030 0x2dc 0x000 0x2 0x0
-#define MX50_PAD_KEY_COL2__CTI_TRIGOUT6				0x030 0x2dc 0x000 0x6 0x0
-#define MX50_PAD_KEY_COL2__USBPHY1_SIECLOCK			0x030 0x2dc 0x000 0x7 0x0
-#define MX50_PAD_KEY_ROW2__KPP_ROW_2				0x034 0x2e0 0x000 0x0 0x0
-#define MX50_PAD_KEY_ROW2__GPIO4_5				0x034 0x2e0 0x000 0x1 0x0
-#define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3			0x034 0x2e0 0x000 0x2 0x0
-#define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7				0x034 0x2e0 0x000 0x6 0x0
-#define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0			0x034 0x2e0 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL3__KPP_COL_3				0x038 0x2e4 0x000 0x0 0x0
-#define MX50_PAD_KEY_COL3__GPIO4_6				0x038 0x2e4 0x000 0x1 0x0
-#define MX50_PAD_KEY_COL3__EIM_NANDF_READY0			0x038 0x2e4 0x7b4 0x2 0x0
-#define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0			0x038 0x2e4 0x7b8 0x6 0x0
-#define MX50_PAD_KEY_COL3__USBPHY1_LINESTATE_1			0x038 0x2e4 0x000 0x7 0x0
-#define MX50_PAD_KEY_ROW3__KPP_ROW_3				0x03c 0x2e8 0x000 0x0 0x0
-#define MX50_PAD_KEY_ROW3__GPIO4_7				0x03c 0x2e8 0x000 0x1 0x0
-#define MX50_PAD_KEY_ROW3__EIM_NANDF_DQS			0x03c 0x2e8 0x7b0 0x2 0x0
-#define MX50_PAD_KEY_ROW3__SDMA_EXT_EVENT_1			0x03c 0x2e8 0x7bc 0x6 0x0
-#define MX50_PAD_KEY_ROW3__USBPHY1_VBUSVALID			0x03c 0x2e8 0x000 0x7 0x0
-#define MX50_PAD_I2C1_SCL__I2C1_SCL				0x040 0x2ec 0x000 0x0 0x0
-#define MX50_PAD_I2C1_SCL__GPIO6_18				0x040 0x2ec 0x000 0x1 0x0
-#define MX50_PAD_I2C1_SCL__UART2_TXD_MUX			0x040 0x2ec 0x7cc 0x2 0x0
-#define MX50_PAD_I2C1_SDA__I2C1_SDA				0x044 0x2f0 0x000 0x0 0x0
-#define MX50_PAD_I2C1_SDA__GPIO6_19				0x044 0x2f0 0x000 0x1 0x0
-#define MX50_PAD_I2C1_SDA__UART2_RXD_MUX			0x044 0x2f0 0x7cc 0x2 0x1
-#define MX50_PAD_I2C2_SCL__I2C2_SCL				0x048 0x2f4 0x000 0x0 0x0
-#define MX50_PAD_I2C2_SCL__GPIO6_20				0x048 0x2f4 0x000 0x1 0x0
-#define MX50_PAD_I2C2_SCL__UART2_CTS				0x048 0x2f4 0x000 0x2 0x0
-#define MX50_PAD_I2C2_SDA__I2C2_SDA				0x04c 0x2f8 0x000 0x0 0x0
-#define MX50_PAD_I2C2_SDA__GPIO6_21				0x04c 0x2f8 0x000 0x1 0x0
-#define MX50_PAD_I2C2_SDA__UART2_RTS				0x04c 0x2f8 0x7c8 0x2 0x1
-#define MX50_PAD_I2C3_SCL__I2C3_SCL				0x050 0x2fc 0x000 0x0 0x0
-#define MX50_PAD_I2C3_SCL__GPIO6_22				0x050 0x2fc 0x000 0x1 0x0
-#define MX50_PAD_I2C3_SCL__FEC_MDC				0x050 0x2fc 0x000 0x2 0x0
-#define MX50_PAD_I2C3_SCL__GPC_PMIC_RDY				0x050 0x2fc 0x000 0x3 0x0
-#define MX50_PAD_I2C3_SCL__GPT_CAPIN1				0x050 0x2fc 0x000 0x5 0x0
-#define MX50_PAD_I2C3_SCL__OBSERVE_MUX_OBSRV_INT_OUT0		0x050 0x2fc 0x000 0x6 0x0
-#define MX50_PAD_I2C3_SCL__USBOH1_USBOTG_OC			0x050 0x2fc 0x7e8 0x7 0x0
-#define MX50_PAD_I2C3_SDA__I2C3_SDA				0x054 0x300 0x000 0x0 0x0
-#define MX50_PAD_I2C3_SDA__GPIO6_23				0x054 0x300 0x000 0x1 0x0
-#define MX50_PAD_I2C3_SDA__FEC_MDIO				0x054 0x300 0x774 0x2 0x0
-#define MX50_PAD_I2C3_SDA__TZIC_PWRFAIL_INT			0x054 0x300 0x000 0x3 0x0
-#define MX50_PAD_I2C3_SDA__SRTC_ALARM_DEB			0x054 0x300 0x000 0x4 0x0
-#define MX50_PAD_I2C3_SDA__GPT_CAPIN2				0x054 0x300 0x000 0x5 0x0
-#define MX50_PAD_I2C3_SDA__OBSERVE_MUX_OBSRV_INT_OUT1		0x054 0x300 0x000 0x6 0x0
-#define MX50_PAD_I2C3_SDA__USBOH1_USBOTG_PWR			0x054 0x300 0x000 0x7 0x0
-#define MX50_PAD_PWM1__PWM1_PWMO				0x058 0x304 0x000 0x0 0x0
-#define MX50_PAD_PWM1__GPIO6_24					0x058 0x304 0x000 0x1 0x0
-#define MX50_PAD_PWM1__USBOH1_USBOTG_OC				0x058 0x304 0x7e8 0x2 0x1
-#define MX50_PAD_PWM1__GPT_CMPOUT1				0x058 0x304 0x000 0x5 0x0
-#define MX50_PAD_PWM1__OBSERVE_MUX_OBSRV_INT_OUT2		0x058 0x304 0x000 0x6 0x0
-#define MX50_PAD_PWM1__SJC_FAIL					0x058 0x304 0x000 0x7 0x0
-#define MX50_PAD_PWM2__PWM2_PWMO				0x05c 0x308 0x000 0x0 0x0
-#define MX50_PAD_PWM2__GPIO6_25					0x05c 0x308 0x000 0x1 0x0
-#define MX50_PAD_PWM2__USBOH1_USBOTG_PWR			0x05c 0x308 0x000 0x2 0x0
-#define MX50_PAD_PWM2__GPT_CMPOUT2				0x05c 0x308 0x000 0x5 0x0
-#define MX50_PAD_PWM2__OBSERVE_MUX_OBSRV_INT_OUT3		0x05c 0x308 0x000 0x6 0x0
-#define MX50_PAD_PWM2__SRC_ANY_PU_RST				0x05c 0x308 0x000 0x7 0x0
-#define MX50_PAD_OWIRE__OWIRE_LINE				0x060 0x30c 0x000 0x0 0x0
-#define MX50_PAD_OWIRE__GPIO6_26				0x060 0x30c 0x000 0x1 0x0
-#define MX50_PAD_OWIRE__USBOH1_USBH1_OC				0x060 0x30c 0x000 0x2 0x0
-#define MX50_PAD_OWIRE__CCM_SSI_EXT1_CLK			0x060 0x30c 0x000 0x3 0x0
-#define MX50_PAD_OWIRE__EPDC_PWRIRQ				0x060 0x30c 0x000 0x4 0x0
-#define MX50_PAD_OWIRE__GPT_CMPOUT3				0x060 0x30c 0x000 0x5 0x0
-#define MX50_PAD_OWIRE__OBSERVE_MUX_OBSRV_INT_OUT4		0x060 0x30c 0x000 0x6 0x0
-#define MX50_PAD_OWIRE__SJC_JTAG_ACT				0x060 0x30c 0x000 0x7 0x0
-#define MX50_PAD_EPITO__EPIT1_EPITO				0x064 0x310 0x000 0x0 0x0
-#define MX50_PAD_EPITO__GPIO6_27				0x064 0x310 0x000 0x1 0x0
-#define MX50_PAD_EPITO__USBOH1_USBH1_PWR			0x064 0x310 0x000 0x2 0x0
-#define MX50_PAD_EPITO__CCM_SSI_EXT2_CLK			0x064 0x310 0x000 0x3 0x0
-#define MX50_PAD_EPITO__DPLLIP1_TOG_EN				0x064 0x310 0x000 0x4 0x0
-#define MX50_PAD_EPITO__GPT_CLK_IN				0x064 0x310 0x000 0x5 0x0
-#define MX50_PAD_EPITO__PMU_IRQ_B				0x064 0x310 0x000 0x6 0x0
-#define MX50_PAD_EPITO__SJC_DE_B				0x064 0x310 0x000 0x7 0x0
-#define MX50_PAD_WDOG__WDOG1_WDOG_B				0x068 0x314 0x000 0x0 0x0
-#define MX50_PAD_WDOG__GPIO6_28					0x068 0x314 0x000 0x1 0x0
-#define MX50_PAD_WDOG__WDOG1_WDOG_RST_B_DEB			0x068 0x314 0x000 0x2 0x0
-#define MX50_PAD_WDOG__CCM_XTAL32K				0x068 0x314 0x000 0x6 0x0
-#define MX50_PAD_WDOG__SJC_DONE					0x068 0x314 0x000 0x7 0x0
-#define MX50_PAD_SSI_TXFS__AUDMUX_AUD3_TXFS			0x06c 0x318 0x000 0x0 0x0
-#define MX50_PAD_SSI_TXFS__GPIO6_0				0x06c 0x318 0x000 0x1 0x0
-#define MX50_PAD_SSI_TXFS__SRC_BT_FUSE_RSV_1			0x06c 0x318 0x000 0x6 0x0
-#define MX50_PAD_SSI_TXFS__USBPHY1_DATAOUT_8			0x06c 0x318 0x000 0x7 0x0
-#define MX50_PAD_SSI_TXC__AUDMUX_AUD3_TXC			0x070 0x31c 0x000 0x0 0x0
-#define MX50_PAD_SSI_TXC__GPIO6_1				0x070 0x31c 0x000 0x1 0x0
-#define MX50_PAD_SSI_TXC__SRC_BT_FUSE_RSV_0			0x070 0x31c 0x000 0x6 0x0
-#define MX50_PAD_SSI_TXC__USBPHY1_DATAOUT_9			0x070 0x31c 0x000 0x7 0x0
-#define MX50_PAD_SSI_TXD__AUDMUX_AUD3_TXD			0x074 0x320 0x000 0x0 0x0
-#define MX50_PAD_SSI_TXD__GPIO6_2				0x074 0x320 0x000 0x1 0x0
-#define MX50_PAD_SSI_TXD__CSPI_RDY				0x074 0x320 0x6e8 0x4 0x0
-#define MX50_PAD_SSI_TXD__USBPHY1_DATAOUT_10			0x074 0x320 0x000 0x7 0x0
-#define MX50_PAD_SSI_RXD__AUDMUX_AUD3_RXD			0x078 0x324 0x000 0x0 0x0
-#define MX50_PAD_SSI_RXD__GPIO6_3				0x078 0x324 0x000 0x1 0x0
-#define MX50_PAD_SSI_RXD__CSPI_SS3				0x078 0x324 0x6f4 0x4 0x0
-#define MX50_PAD_SSI_RXD__USBPHY1_DATAOUT_11			0x078 0x324 0x000 0x7 0x0
-#define MX50_PAD_SSI_RXFS__AUDMUX_AUD3_RXFS			0x07c 0x328 0x000 0x0 0x0
-#define MX50_PAD_SSI_RXFS__GPIO6_4				0x07c 0x328 0x000 0x1 0x0
-#define MX50_PAD_SSI_RXFS__UART5_TXD_MUX			0x07c 0x328 0x7e4 0x2 0x0
-#define MX50_PAD_SSI_RXFS__EIM_WEIM_D_6				0x07c 0x328 0x804 0x3 0x0
-#define MX50_PAD_SSI_RXFS__CSPI_SS2				0x07c 0x328 0x6f0 0x4 0x0
-#define MX50_PAD_SSI_RXFS__FEC_COL				0x07c 0x328 0x770 0x5 0x0
-#define MX50_PAD_SSI_RXFS__FEC_MDC				0x07c 0x328 0x000 0x6 0x0
-#define MX50_PAD_SSI_RXFS__USBPHY1_DATAOUT_12			0x07c 0x328 0x000 0x7 0x0
-#define MX50_PAD_SSI_RXC__AUDMUX_AUD3_RXC			0x080 0x32c 0x000 0x0 0x0
-#define MX50_PAD_SSI_RXC__GPIO6_5				0x080 0x32c 0x000 0x1 0x0
-#define MX50_PAD_SSI_RXC__UART5_RXD_MUX				0x080 0x32c 0x7e4 0x2 0x1
-#define MX50_PAD_SSI_RXC__EIM_WEIM_D_7				0x080 0x32c 0x808 0x3 0x0
-#define MX50_PAD_SSI_RXC__CSPI_SS1				0x080 0x32c 0x6ec 0x4 0x0
-#define MX50_PAD_SSI_RXC__FEC_RX_CLK				0x080 0x32c 0x780 0x5 0x0
-#define MX50_PAD_SSI_RXC__FEC_MDIO				0x080 0x32c 0x774 0x6 0x1
-#define MX50_PAD_SSI_RXC__USBPHY1_DATAOUT_13			0x080 0x32c 0x000 0x7 0x0
-#define MX50_PAD_UART1_TXD__UART1_TXD_MUX			0x084 0x330 0x7c4 0x0 0x0
-#define MX50_PAD_UART1_TXD__GPIO6_6				0x084 0x330 0x000 0x1 0x0
-#define MX50_PAD_UART1_TXD__USBPHY1_DATAOUT_14			0x084 0x330 0x000 0x7 0x0
-#define MX50_PAD_UART1_RXD__UART1_RXD_MUX			0x088 0x334 0x7c4 0x0 0x1
-#define MX50_PAD_UART1_RXD__GPIO6_7				0x088 0x334 0x000 0x1 0x0
-#define MX50_PAD_UART1_RXD__USBPHY1_DATAOUT_15			0x088 0x334 0x000 0x7 0x0
-#define MX50_PAD_UART1_CTS__UART1_CTS				0x08c 0x338 0x000 0x0 0x0
-#define MX50_PAD_UART1_CTS__GPIO6_8				0x08c 0x338 0x000 0x1 0x0
-#define MX50_PAD_UART1_CTS__UART5_TXD_MUX			0x08c 0x338 0x7e4 0x2 0x2
-#define MX50_PAD_UART1_CTS__ESDHC4_DAT4				0x08c 0x338 0x760 0x4 0x0
-#define MX50_PAD_UART1_CTS__ESDHC4_CMD				0x08c 0x338 0x74c 0x5 0x0
-#define MX50_PAD_UART1_CTS__USBPHY2_DATAOUT_8			0x08c 0x338 0x000 0x7 0x0
-#define MX50_PAD_UART1_RTS__UART1_RTS				0x090 0x33c 0x7c0 0x0 0x3
-#define MX50_PAD_UART1_RTS__GPIO6_9				0x090 0x33c 0x000 0x1 0x0
-#define MX50_PAD_UART1_RTS__UART5_RXD_MUX			0x090 0x33c 0x7e4 0x2 0x3
-#define MX50_PAD_UART1_RTS__ESDHC4_DAT5				0x090 0x33c 0x764 0x4 0x0
-#define MX50_PAD_UART1_RTS__ESDHC4_CLK				0x090 0x33c 0x748 0x5 0x0
-#define MX50_PAD_UART1_RTS__USBPHY2_DATAOUT_9			0x090 0x33c 0x000 0x7 0x0
-#define MX50_PAD_UART2_TXD__UART2_TXD_MUX			0x094 0x340 0x7cc 0x0 0x2
-#define MX50_PAD_UART2_TXD__GPIO6_10				0x094 0x340 0x000 0x1 0x0
-#define MX50_PAD_UART2_TXD__ESDHC4_DAT6				0x094 0x340 0x768 0x4 0x0
-#define MX50_PAD_UART2_TXD__ESDHC4_DAT4				0x094 0x340 0x760 0x5 0x1
-#define MX50_PAD_UART2_TXD__USBPHY2_DATAOUT_10			0x094 0x340 0x000 0x7 0x0
-#define MX50_PAD_UART2_RXD__UART2_RXD_MUX			0x098 0x344 0x7cc 0x0 0x3
-#define MX50_PAD_UART2_RXD__GPIO6_11				0x098 0x344 0x000 0x1 0x0
-#define MX50_PAD_UART2_RXD__ESDHC4_DAT7				0x098 0x344 0x76c 0x4 0x0
-#define MX50_PAD_UART2_RXD__ESDHC4_DAT5				0x098 0x344 0x764 0x5 0x1
-#define MX50_PAD_UART2_RXD__USBPHY2_DATAOUT_11			0x098 0x344 0x000 0x7 0x0
-#define MX50_PAD_UART2_CTS__UART2_CTS				0x09c 0x348 0x000 0x0 0x0
-#define MX50_PAD_UART2_CTS__GPIO6_12				0x09c 0x348 0x000 0x1 0x0
-#define MX50_PAD_UART2_CTS__ESDHC4_CMD				0x09c 0x348 0x74c 0x4 0x1
-#define MX50_PAD_UART2_CTS__ESDHC4_DAT6				0x09c 0x348 0x768 0x5 0x1
-#define MX50_PAD_UART2_CTS__USBPHY2_DATAOUT_12			0x09c 0x348 0x000 0x7 0x0
-#define MX50_PAD_UART2_RTS__UART2_RTS				0x0a0 0x34c 0x7c8 0x0 0x2
-#define MX50_PAD_UART2_RTS__GPIO6_13				0x0a0 0x34c 0x000 0x1 0x0
-#define MX50_PAD_UART2_RTS__ESDHC4_CLK				0x0a0 0x34c 0x748 0x4 0x1
-#define MX50_PAD_UART2_RTS__ESDHC4_DAT7				0x0a0 0x34c 0x76c 0x5 0x1
-#define MX50_PAD_UART2_RTS__USBPHY2_DATAOUT_13			0x0a0 0x34c 0x000 0x7 0x0
-#define MX50_PAD_UART3_TXD__UART3_TXD_MUX			0x0a4 0x350 0x7d4 0x0 0x0
-#define MX50_PAD_UART3_TXD__GPIO6_14				0x0a4 0x350 0x000 0x1 0x0
-#define MX50_PAD_UART3_TXD__ESDHC1_DAT4				0x0a4 0x350 0x000 0x3 0x0
-#define MX50_PAD_UART3_TXD__ESDHC4_DAT0				0x0a4 0x350 0x000 0x4 0x0
-#define MX50_PAD_UART3_TXD__ESDHC2_WP				0x0a4 0x350 0x744 0x5 0x0
-#define MX50_PAD_UART3_TXD__EIM_WEIM_D_12			0x0a4 0x350 0x81c 0x6 0x0
-#define MX50_PAD_UART3_TXD__USBPHY2_DATAOUT_14			0x0a4 0x350 0x000 0x7 0x0
-#define MX50_PAD_UART3_RXD__UART3_RXD_MUX			0x0a8 0x354 0x7d4 0x0 0x1
-#define MX50_PAD_UART3_RXD__GPIO6_15				0x0a8 0x354 0x000 0x1 0x0
-#define MX50_PAD_UART3_RXD__ESDHC1_DAT5				0x0a8 0x354 0x000 0x3 0x0
-#define MX50_PAD_UART3_RXD__ESDHC4_DAT1				0x0a8 0x354 0x754 0x4 0x0
-#define MX50_PAD_UART3_RXD__ESDHC2_CD				0x0a8 0x354 0x740 0x5 0x0
-#define MX50_PAD_UART3_RXD__EIM_WEIM_D_13			0x0a8 0x354 0x820 0x6 0x0
-#define MX50_PAD_UART3_RXD__USBPHY2_DATAOUT_15			0x0a8 0x354 0x000 0x7 0x0
-#define MX50_PAD_UART4_TXD__UART4_TXD_MUX			0x0ac 0x358 0x7dc 0x0 0x0
-#define MX50_PAD_UART4_TXD__GPIO6_16				0x0ac 0x358 0x000 0x1 0x0
-#define MX50_PAD_UART4_TXD__UART3_CTS				0x0ac 0x358 0x7d0 0x2 0x0
-#define MX50_PAD_UART4_TXD__ESDHC1_DAT6				0x0ac 0x358 0x000 0x3 0x0
-#define MX50_PAD_UART4_TXD__ESDHC4_DAT2				0x0ac 0x358 0x758 0x4 0x0
-#define MX50_PAD_UART4_TXD__ESDHC2_LCTL				0x0ac 0x358 0x000 0x5 0x0
-#define MX50_PAD_UART4_TXD__EIM_WEIM_D_14			0x0ac 0x358 0x824 0x6 0x0
-#define MX50_PAD_UART4_RXD__UART4_RXD_MUX			0x0b0 0x35c 0x7dc 0x0 0x1
-#define MX50_PAD_UART4_RXD__GPIO6_17				0x0b0 0x35c 0x000 0x1 0x0
-#define MX50_PAD_UART4_RXD__UART3_RTS				0x0b0 0x35c 0x7d0 0x2 0x1
-#define MX50_PAD_UART4_RXD__ESDHC1_DAT7				0x0b0 0x35c 0x000 0x3 0x0
-#define MX50_PAD_UART4_RXD__ESDHC4_DAT3				0x0b0 0x35c 0x75c 0x4 0x0
-#define MX50_PAD_UART4_RXD__ESDHC1_LCTL				0x0b0 0x35c 0x000 0x5 0x0
-#define MX50_PAD_UART4_RXD__EIM_WEIM_D_15			0x0b0 0x35c 0x828 0x6 0x0
-#define MX50_PAD_CSPI_SCLK__CSPI_SCLK				0x0b4 0x360 0x000 0x0 0x0
-#define MX50_PAD_CSPI_SCLK__GPIO4_8				0x0b4 0x360 0x000 0x1 0x0
-#define MX50_PAD_CSPI_MOSI__CSPI_MOSI				0x0b8 0x364 0x000 0x0 0x0
-#define MX50_PAD_CSPI_MOSI__GPIO4_9				0x0b8 0x364 0x000 0x1 0x0
-#define MX50_PAD_CSPI_MISO__CSPI_MISO				0x0bc 0x368 0x000 0x0 0x0
-#define MX50_PAD_CSPI_MISO__GPIO4_10				0x0bc 0x368 0x000 0x1 0x0
-#define MX50_PAD_CSPI_SS0__CSPI_SS0				0x0c0 0x36c 0x000 0x0 0x0
-#define MX50_PAD_CSPI_SS0__GPIO4_11				0x0c0 0x36c 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK			0x0c4 0x370 0x000 0x0 0x0
-#define MX50_PAD_ECSPI1_SCLK__GPIO4_12				0x0c4 0x370 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY				0x0c4 0x370 0x6e8 0x2 0x1
-#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY			0x0c4 0x370 0x000 0x3 0x0
-#define MX50_PAD_ECSPI1_SCLK__UART3_RTS				0x0c4 0x370 0x7d0 0x4 0x2
-#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE_6			0x0c4 0x370 0x000 0x5 0x0
-#define MX50_PAD_ECSPI1_SCLK__EIM_WEIM_D_8			0x0c4 0x370 0x80c 0x7 0x0
-#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI			0x0c8 0x374 0x000 0x0 0x0
-#define MX50_PAD_ECSPI1_MOSI__GPIO4_13				0x0c8 0x374 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1				0x0c8 0x374 0x6ec 0x2 0x1
-#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1			0x0c8 0x374 0x000 0x3 0x0
-#define MX50_PAD_ECSPI1_MOSI__UART3_CTS				0x0c8 0x374 0x000 0x4 0x0
-#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE_7			0x0c8 0x374 0x000 0x5 0x0
-#define MX50_PAD_ECSPI1_MOSI__EIM_WEIM_D_9			0x0c8 0x374 0x810 0x7 0x0
-#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO			0x0cc 0x378 0x000 0x0 0x0
-#define MX50_PAD_ECSPI1_MISO__GPIO4_14				0x0cc 0x378 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_MISO__CSPI_SS2				0x0cc 0x378 0x6f0 0x2 0x1
-#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2			0x0cc 0x378 0x000 0x3 0x0
-#define MX50_PAD_ECSPI1_MISO__UART4_RTS				0x0cc 0x378 0x7d8 0x4 0x0
-#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE_8			0x0cc 0x378 0x000 0x5 0x0
-#define MX50_PAD_ECSPI1_MISO__EIM_WEIM_D_10			0x0cc 0x378 0x814 0x7 0x0
-#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0				0x0d0 0x37c 0x000 0x0 0x0
-#define MX50_PAD_ECSPI1_SS0__GPIO4_15				0x0d0 0x37c 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_SS0__CSPI_SS3				0x0d0 0x37c 0x6f4 0x2 0x1
-#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3				0x0d0 0x37c 0x000 0x3 0x0
-#define MX50_PAD_ECSPI1_SS0__UART4_CTS				0x0d0 0x37c 0x000 0x4 0x0
-#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE_9			0x0d0 0x37c 0x000 0x5 0x0
-#define MX50_PAD_ECSPI1_SS0__EIM_WEIM_D_11			0x0d0 0x37c 0x818 0x7 0x0
-#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK			0x0d4 0x380 0x000 0x0 0x0
-#define MX50_PAD_ECSPI2_SCLK__GPIO4_16				0x0d4 0x380 0x000 0x1 0x0
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR_RWN			0x0d4 0x380 0x000 0x2 0x0
-#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY			0x0d4 0x380 0x000 0x3 0x0
-#define MX50_PAD_ECSPI2_SCLK__UART5_RTS				0x0d4 0x380 0x7e0 0x4 0x0
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK			0x0d4 0x380 0x000 0x5 0x0
-#define MX50_PAD_ECSPI2_SCLK__EIM_NANDF_CEN_4			0x0d4 0x380 0x000 0x6 0x0
-#define MX50_PAD_ECSPI2_SCLK__EIM_WEIM_D_8			0x0d4 0x380 0x80c 0x7 0x1
-#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI			0x0d8 0x384 0x000 0x0 0x0
-#define MX50_PAD_ECSPI2_MOSI__GPIO4_17				0x0d8 0x384 0x000 0x1 0x0
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RE_E			0x0d8 0x384 0x000 0x2 0x0
-#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1			0x0d8 0x384 0x000 0x3 0x0
-#define MX50_PAD_ECSPI2_MOSI__UART5_CTS				0x0d8 0x384 0x7e0 0x4 0x1
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_ENABLE			0x0d8 0x384 0x000 0x5 0x0
-#define MX50_PAD_ECSPI2_MOSI__EIM_NANDF_CEN_5			0x0d8 0x384 0x000 0x6 0x0
-#define MX50_PAD_ECSPI2_MOSI__EIM_WEIM_D_9			0x0d8 0x384 0x810 0x7 0x1
-#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO			0x0dc 0x388 0x000 0x0 0x0
-#define MX50_PAD_ECSPI2_MISO__GPIO4_18				0x0dc 0x388 0x000 0x1 0x0
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS				0x0dc 0x388 0x000 0x2 0x0
-#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2			0x0dc 0x388 0x000 0x3 0x0
-#define MX50_PAD_ECSPI2_MISO__UART5_TXD_MUX			0x0dc 0x388 0x7e4 0x4 0x4
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC			0x0dc 0x388 0x73c 0x5 0x0
-#define MX50_PAD_ECSPI2_MISO__EIM_NANDF_CEN_6			0x0dc 0x388 0x000 0x6 0x0
-#define MX50_PAD_ECSPI2_MISO__EIM_WEIM_D_10			0x0dc 0x388 0x814 0x7 0x1
-#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0				0x0e0 0x38c 0x000 0x0 0x0
-#define MX50_PAD_ECSPI2_SS0__GPIO4_19				0x0e0 0x38c 0x000 0x1 0x0
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS				0x0e0 0x38c 0x000 0x2 0x0
-#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS3				0x0e0 0x38c 0x000 0x3 0x0
-#define MX50_PAD_ECSPI2_SS0__UART5_RXD_MUX			0x0e0 0x38c 0x7e4 0x4 0x5
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC			0x0e0 0x38c 0x6f8 0x5 0x0
-#define MX50_PAD_ECSPI2_SS0__EIM_NANDF_CEN_7			0x0e0 0x38c 0x000 0x6 0x0
-#define MX50_PAD_ECSPI2_SS0__EIM_WEIM_D_11			0x0e0 0x38c 0x818 0x7 0x1
-#define MX50_PAD_SD1_CLK__ESDHC1_CLK				0x0e4 0x390 0x000 0x0 0x0
-#define MX50_PAD_SD1_CLK__GPIO5_0				0x0e4 0x390 0x000 0x1 0x0
-#define MX50_PAD_SD1_CLK__CCM_CLKO				0x0e4 0x390 0x000 0x7 0x0
-#define MX50_PAD_SD1_CMD__ESDHC1_CMD				0x0e8 0x394 0x000 0x0 0x0
-#define MX50_PAD_SD1_CMD__GPIO5_1				0x0e8 0x394 0x000 0x1 0x0
-#define MX50_PAD_SD1_CMD__CCM_CLKO2				0x0e8 0x394 0x000 0x7 0x0
-#define MX50_PAD_SD1_D0__ESDHC1_DAT0				0x0ec 0x398 0x000 0x0 0x0
-#define MX50_PAD_SD1_D0__GPIO5_2				0x0ec 0x398 0x000 0x1 0x0
-#define MX50_PAD_SD1_D0__CCM_PLL1_BYP				0x0ec 0x398 0x6dc 0x7 0x0
-#define MX50_PAD_SD1_D1__ESDHC1_DAT1				0x0f0 0x39c 0x000 0x0 0x0
-#define MX50_PAD_SD1_D1__GPIO5_3				0x0f0 0x39c 0x000 0x1 0x0
-#define MX50_PAD_SD1_D1__CCM_PLL2_BYP				0x0f0 0x39c 0x000 0x7 0x0
-#define MX50_PAD_SD1_D2__ESDHC1_DAT2				0x0f4 0x3a0 0x000 0x0 0x0
-#define MX50_PAD_SD1_D2__GPIO5_4				0x0f4 0x3a0 0x000 0x1 0x0
-#define MX50_PAD_SD1_D2__CCM_PLL3_BYP				0x0f4 0x3a0 0x6e4 0x7 0x0
-#define MX50_PAD_SD1_D3__ESDHC1_DAT3				0x0f8 0x3a4 0x000 0x0 0x0
-#define MX50_PAD_SD1_D3__GPIO5_5				0x0f8 0x3a4 0x000 0x1 0x0
-#define MX50_PAD_SD2_CLK__ESDHC2_CLK				0x0fc 0x3a8 0x000 0x0 0x0
-#define MX50_PAD_SD2_CLK__GPIO5_6				0x0fc 0x3a8 0x000 0x1 0x0
-#define MX50_PAD_SD2_CLK__MSHC_SCLK				0x0fc 0x3a8 0x000 0x2 0x0
-#define MX50_PAD_SD2_CMD__ESDHC2_CMD				0x100 0x3ac 0x000 0x0 0x0
-#define MX50_PAD_SD2_CMD__GPIO5_7				0x100 0x3ac 0x000 0x1 0x0
-#define MX50_PAD_SD2_CMD__MSHC_BS				0x100 0x3ac 0x000 0x2 0x0
-#define MX50_PAD_SD2_D0__ESDHC2_DAT0				0x104 0x3b0 0x000 0x0 0x0
-#define MX50_PAD_SD2_D0__GPIO5_8				0x104 0x3b0 0x000 0x1 0x0
-#define MX50_PAD_SD2_D0__MSHC_DATA_0				0x104 0x3b0 0x000 0x2 0x0
-#define MX50_PAD_SD2_D0__KPP_COL_4				0x104 0x3b0 0x790 0x3 0x0
-#define MX50_PAD_SD2_D1__ESDHC2_DAT1				0x108 0x3b4 0x000 0x0 0x0
-#define MX50_PAD_SD2_D1__GPIO5_9				0x108 0x3b4 0x000 0x1 0x0
-#define MX50_PAD_SD2_D1__MSHC_DATA_1				0x108 0x3b4 0x000 0x2 0x0
-#define MX50_PAD_SD2_D1__KPP_ROW_4				0x108 0x3b4 0x7a0 0x3 0x0
-#define MX50_PAD_SD2_D2__ESDHC2_DAT2				0x10c 0x3b8 0x000 0x0 0x0
-#define MX50_PAD_SD2_D2__GPIO5_10				0x10c 0x3b8 0x000 0x1 0x0
-#define MX50_PAD_SD2_D2__MSHC_DATA_2				0x10c 0x3b8 0x000 0x2 0x0
-#define MX50_PAD_SD2_D2__KPP_COL_5				0x10c 0x3b8 0x794 0x3 0x0
-#define MX50_PAD_SD2_D3__ESDHC2_DAT3				0x110 0x3bc 0x000 0x0 0x0
-#define MX50_PAD_SD2_D3__GPIO5_11				0x110 0x3bc 0x000 0x1 0x0
-#define MX50_PAD_SD2_D3__MSHC_DATA_3				0x110 0x3bc 0x000 0x2 0x0
-#define MX50_PAD_SD2_D3__KPP_ROW_5				0x110 0x3bc 0x7a4 0x3 0x0
-#define MX50_PAD_SD2_D4__ESDHC2_DAT4				0x114 0x3c0 0x000 0x0 0x0
-#define MX50_PAD_SD2_D4__GPIO5_12				0x114 0x3c0 0x000 0x1 0x0
-#define MX50_PAD_SD2_D4__AUDMUX_AUD4_RXFS			0x114 0x3c0 0x6d0 0x2 0x0
-#define MX50_PAD_SD2_D4__KPP_COL_6				0x114 0x3c0 0x798 0x3 0x0
-#define MX50_PAD_SD2_D4__EIM_WEIM_D_0				0x114 0x3c0 0x7ec 0x4 0x0
-#define MX50_PAD_SD2_D4__CCM_CCM_OUT_0				0x114 0x3c0 0x000 0x7 0x0
-#define MX50_PAD_SD2_D5__ESDHC2_DAT5				0x118 0x3c4 0x000 0x0 0x0
-#define MX50_PAD_SD2_D5__GPIO5_13				0x118 0x3c4 0x000 0x1 0x0
-#define MX50_PAD_SD2_D5__AUDMUX_AUD4_RXC			0x118 0x3c4 0x6cc 0x2 0x0
-#define MX50_PAD_SD2_D5__KPP_ROW_6				0x118 0x3c4 0x7a8 0x3 0x0
-#define MX50_PAD_SD2_D5__EIM_WEIM_D_1				0x118 0x3c4 0x7f0 0x4 0x0
-#define MX50_PAD_SD2_D5__CCM_CCM_OUT_1				0x118 0x3c4 0x000 0x7 0x0
-#define MX50_PAD_SD2_D6__ESDHC2_DAT6				0x11c 0x3c8 0x000 0x0 0x0
-#define MX50_PAD_SD2_D6__GPIO5_14				0x11c 0x3c8 0x000 0x1 0x0
-#define MX50_PAD_SD2_D6__AUDMUX_AUD4_RXD			0x11c 0x3c8 0x6c4 0x2 0x0
-#define MX50_PAD_SD2_D6__KPP_COL_7				0x11c 0x3c8 0x79c 0x3 0x0
-#define MX50_PAD_SD2_D6__EIM_WEIM_D_2				0x11c 0x3c8 0x7f4 0x4 0x0
-#define MX50_PAD_SD2_D6__CCM_CCM_OUT_2				0x11c 0x3c8 0x000 0x7 0x0
-#define MX50_PAD_SD2_D7__ESDHC2_DAT7				0x120 0x3cc 0x000 0x0 0x0
-#define MX50_PAD_SD2_D7__GPIO5_15				0x120 0x3cc 0x000 0x1 0x0
-#define MX50_PAD_SD2_D7__AUDMUX_AUD4_TXFS			0x120 0x3cc 0x6d8 0x2 0x0
-#define MX50_PAD_SD2_D7__KPP_ROW_7				0x120 0x3cc 0x7ac 0x3 0x0
-#define MX50_PAD_SD2_D7__EIM_WEIM_D_3				0x120 0x3cc 0x7f8 0x4 0x0
-#define MX50_PAD_SD2_D7__CCM_STOP				0x120 0x3cc 0x000 0x7 0x0
-#define MX50_PAD_SD2_WP__ESDHC2_WP				0x124 0x3d0 0x744 0x0 0x1
-#define MX50_PAD_SD2_WP__GPIO5_16				0x124 0x3d0 0x000 0x1 0x0
-#define MX50_PAD_SD2_WP__AUDMUX_AUD4_TXD			0x124 0x3d0 0x6c8 0x2 0x0
-#define MX50_PAD_SD2_WP__EIM_WEIM_D_4				0x124 0x3d0 0x7fc 0x4 0x0
-#define MX50_PAD_SD2_WP__CCM_WAIT				0x124 0x3d0 0x000 0x7 0x0
-#define MX50_PAD_SD2_CD__ESDHC2_CD				0x128 0x3d4 0x740 0x0 0x1
-#define MX50_PAD_SD2_CD__GPIO5_17				0x128 0x3d4 0x000 0x1 0x0
-#define MX50_PAD_SD2_CD__AUDMUX_AUD4_TXC			0x128 0x3d4 0x6d4 0x2 0x0
-#define MX50_PAD_SD2_CD__EIM_WEIM_D_5				0x128 0x3d4 0x800 0x4 0x0
-#define MX50_PAD_SD2_CD__CCM_REF_EN_B				0x128 0x3d4 0x000 0x7 0x0
-#define MX50_PAD_DISP_D0__ELCDIF_DAT_0				0x12c 0x40c 0x6fc 0x0 0x0
-#define MX50_PAD_DISP_D0__GPIO2_0				0x12c 0x40c 0x000 0x1 0x0
-#define MX50_PAD_DISP_D0__FEC_TX_CLK				0x12c 0x40c 0x78c 0x2 0x0
-#define MX50_PAD_DISP_D0__EIM_WEIM_A_16				0x12c 0x40c 0x000 0x3 0x0
-#define MX50_PAD_DISP_D0__SDMA_DEBUG_PC_0			0x12c 0x40c 0x000 0x6 0x0
-#define MX50_PAD_DISP_D0__USBPHY1_VSTATUS_0			0x12c 0x40c 0x000 0x7 0x0
-#define MX50_PAD_DISP_D1__ELCDIF_DAT_1				0x130 0x410 0x700 0x0 0x0
-#define MX50_PAD_DISP_D1__GPIO2_1				0x130 0x410 0x000 0x1 0x0
-#define MX50_PAD_DISP_D1__FEC_RX_ERR				0x130 0x410 0x788 0x2 0x0
-#define MX50_PAD_DISP_D1__EIM_WEIM_A_17				0x130 0x410 0x000 0x3 0x0
-#define MX50_PAD_DISP_D1__SDMA_DEBUG_PC_1			0x130 0x410 0x000 0x6 0x0
-#define MX50_PAD_DISP_D1__USBPHY1_VSTATUS_1			0x130 0x410 0x000 0x7 0x0
-#define MX50_PAD_DISP_D2__ELCDIF_DAT_2				0x134 0x414 0x704 0x0 0x0
-#define MX50_PAD_DISP_D2__GPIO2_2				0x134 0x414 0x000 0x1 0x0
-#define MX50_PAD_DISP_D2__FEC_RX_DV				0x134 0x414 0x784 0x2 0x0
-#define MX50_PAD_DISP_D2__EIM_WEIM_A_18				0x134 0x414 0x000 0x3 0x0
-#define MX50_PAD_DISP_D2__SDMA_DEBUG_PC_2			0x134 0x414 0x000 0x6 0x0
-#define MX50_PAD_DISP_D2__USBPHY1_VSTATUS_2			0x134 0x414 0x000 0x7 0x0
-#define MX50_PAD_DISP_D3__ELCDIF_DAT_3				0x138 0x418 0x708 0x0 0x0
-#define MX50_PAD_DISP_D3__GPIO2_3				0x138 0x418 0x000 0x1 0x0
-#define MX50_PAD_DISP_D3__FEC_RDATA_1				0x138 0x418 0x77c 0x2 0x0
-#define MX50_PAD_DISP_D3__EIM_WEIM_A_19				0x138 0x418 0x000 0x3 0x0
-#define MX50_PAD_DISP_D3__FEC_COL				0x138 0x418 0x770 0x4 0x1
-#define MX50_PAD_DISP_D3__SDMA_DEBUG_PC_3			0x138 0x418 0x000 0x6 0x0
-#define MX50_PAD_DISP_D3__USBPHY1_VSTATUS_3			0x138 0x418 0x000 0x7 0x0
-#define MX50_PAD_DISP_D4__ELCDIF_DAT_4				0x13c 0x41c 0x70c 0x0 0x0
-#define MX50_PAD_DISP_D4__GPIO2_4				0x13c 0x41c 0x000 0x1 0x0
-#define MX50_PAD_DISP_D4__FEC_RDATA_0				0x13c 0x41c 0x778 0x2 0x0
-#define MX50_PAD_DISP_D4__EIM_WEIM_A_20				0x13c 0x41c 0x000 0x3 0x0
-#define MX50_PAD_DISP_D4__SDMA_DEBUG_PC_4			0x13c 0x41c 0x000 0x6 0x0
-#define MX50_PAD_DISP_D4__USBPHY1_VSTATUS_4			0x13c 0x41c 0x000 0x7 0x0
-#define MX50_PAD_DISP_D5__ELCDIF_DAT_5				0x140 0x420 0x710 0x0 0x0
-#define MX50_PAD_DISP_D5__GPIO2_5				0x140 0x420 0x000 0x1 0x0
-#define MX50_PAD_DISP_D5__FEC_TX_EN				0x140 0x420 0x000 0x2 0x0
-#define MX50_PAD_DISP_D5__EIM_WEIM_A_21				0x140 0x420 0x000 0x3 0x0
-#define MX50_PAD_DISP_D5__SDMA_DEBUG_PC_5			0x140 0x420 0x000 0x6 0x0
-#define MX50_PAD_DISP_D5__USBPHY1_VSTATUS_5			0x140 0x420 0x000 0x7 0x0
-#define MX50_PAD_DISP_D6__ELCDIF_DAT_6				0x144 0x424 0x714 0x0 0x0
-#define MX50_PAD_DISP_D6__GPIO2_6				0x144 0x424 0x000 0x1 0x0
-#define MX50_PAD_DISP_D6__FEC_TDATA_1				0x144 0x424 0x000 0x2 0x0
-#define MX50_PAD_DISP_D6__EIM_WEIM_A_22				0x144 0x424 0x000 0x3 0x0
-#define MX50_PAD_DISP_D6__FEC_RX_CLK				0x144 0x424 0x780 0x4 0x1
-#define MX50_PAD_DISP_D6__SDMA_DEBUG_PC_6			0x144 0x424 0x000 0x6 0x0
-#define MX50_PAD_DISP_D6__USBPHY1_VSTATUS_6			0x144 0x424 0x000 0x7 0x0
-#define MX50_PAD_DISP_D7__ELCDIF_DAT_7				0x148 0x428 0x718 0x0 0x0
-#define MX50_PAD_DISP_D7__GPIO2_7				0x148 0x428 0x000 0x1 0x0
-#define MX50_PAD_DISP_D7__FEC_TDATA_0				0x148 0x428 0x000 0x2 0x0
-#define MX50_PAD_DISP_D7__EIM_WEIM_A_23				0x148 0x428 0x000 0x3 0x0
-#define MX50_PAD_DISP_D7__SDMA_DEBUG_PC_7			0x148 0x428 0x000 0x6 0x0
-#define MX50_PAD_DISP_D7__USBPHY1_VSTATUS_7			0x148 0x428 0x000 0x7 0x0
-#define MX50_PAD_DISP_WR__ELCDIF_WR_RWN				0x14c 0x42c 0x000 0x0 0x0
-#define MX50_PAD_DISP_WR__GPIO2_16				0x14c 0x42c 0x000 0x1 0x0
-#define MX50_PAD_DISP_WR__ELCDIF_DOTCLK				0x14c 0x42c 0x000 0x2 0x0
-#define MX50_PAD_DISP_WR__EIM_WEIM_A_24				0x14c 0x42c 0x000 0x3 0x0
-#define MX50_PAD_DISP_WR__SDMA_DEBUG_PC_8			0x14c 0x42c 0x000 0x6 0x0
-#define MX50_PAD_DISP_WR__USBPHY1_AVALID			0x14c 0x42c 0x000 0x7 0x0
-#define MX50_PAD_DISP_RD__ELCDIF_RD_E				0x150 0x430 0x000 0x0 0x0
-#define MX50_PAD_DISP_RD__GPIO2_19				0x150 0x430 0x000 0x1 0x0
-#define MX50_PAD_DISP_RD__ELCDIF_ENABLE				0x150 0x430 0x000 0x2 0x0
-#define MX50_PAD_DISP_RD__EIM_WEIM_A_25				0x150 0x430 0x000 0x3 0x0
-#define MX50_PAD_DISP_RD__SDMA_DEBUG_PC_9			0x150 0x430 0x000 0x6 0x0
-#define MX50_PAD_DISP_RD__USBPHY1_BVALID			0x150 0x430 0x000 0x7 0x0
-#define MX50_PAD_DISP_RS__ELCDIF_RS				0x154 0x434 0x000 0x0 0x0
-#define MX50_PAD_DISP_RS__GPIO2_17				0x154 0x434 0x000 0x1 0x0
-#define MX50_PAD_DISP_RS__ELCDIF_VSYNC				0x154 0x434 0x73c 0x2 0x1
-#define MX50_PAD_DISP_RS__EIM_WEIM_A_26				0x154 0x434 0x000 0x3 0x0
-#define MX50_PAD_DISP_RS__SDMA_DEBUG_PC_10			0x154 0x434 0x000 0x6 0x0
-#define MX50_PAD_DISP_RS__USBPHY1_ENDSESSION			0x154 0x434 0x000 0x7 0x0
-#define MX50_PAD_DISP_CS__ELCDIF_CS				0x158 0x438 0x000 0x0 0x0
-#define MX50_PAD_DISP_CS__GPIO2_21				0x158 0x438 0x000 0x1 0x0
-#define MX50_PAD_DISP_CS__ELCDIF_HSYNC				0x158 0x438 0x6f8 0x2 0x1
-#define MX50_PAD_DISP_CS__EIM_WEIM_A_27				0x158 0x438 0x000 0x3 0x0
-#define MX50_PAD_DISP_CS__EIM_WEIM_CS_3				0x158 0x438 0x000 0x4 0x0
-#define MX50_PAD_DISP_CS__SDMA_DEBUG_PC_11			0x158 0x438 0x000 0x6 0x0
-#define MX50_PAD_DISP_CS__USBPHY1_IDDIG				0x158 0x438 0x000 0x7 0x0
-#define MX50_PAD_DISP_BUSY__ELCDIF_BUSY				0x15c 0x43c 0x6f8 0x0 0x2
-#define MX50_PAD_DISP_BUSY__GPIO2_18				0x15c 0x43c 0x000 0x1 0x0
-#define MX50_PAD_DISP_BUSY__EIM_WEIM_CS_3			0x15c 0x43c 0x000 0x4 0x0
-#define MX50_PAD_DISP_BUSY__SDMA_DEBUG_PC_12			0x15c 0x43c 0x000 0x6 0x0
-#define MX50_PAD_DISP_BUSY__USBPHY2_HOSTDISCONNECT		0x15c 0x43c 0x000 0x7 0x0
-#define MX50_PAD_DISP_RESET__ELCDIF_RESET			0x160 0x440 0x000 0x0 0x0
-#define MX50_PAD_DISP_RESET__GPIO2_20				0x160 0x440 0x000 0x1 0x0
-#define MX50_PAD_DISP_RESET__EIM_WEIM_CS_3			0x160 0x440 0x000 0x4 0x0
-#define MX50_PAD_DISP_RESET__SDMA_DEBUG_PC_13			0x160 0x440 0x000 0x6 0x0
-#define MX50_PAD_DISP_RESET__USBPHY2_BISTOK			0x160 0x440 0x000 0x7 0x0
-#define MX50_PAD_SD3_CMD__ESDHC3_CMD				0x164 0x444 0x000 0x0 0x0
-#define MX50_PAD_SD3_CMD__GPIO5_18				0x164 0x444 0x000 0x1 0x0
-#define MX50_PAD_SD3_CMD__EIM_NANDF_WRN				0x164 0x444 0x000 0x2 0x0
-#define MX50_PAD_SD3_CMD__SSP_CMD				0x164 0x444 0x000 0x3 0x0
-#define MX50_PAD_SD3_CLK__ESDHC3_CLK				0x168 0x448 0x000 0x0 0x0
-#define MX50_PAD_SD3_CLK__GPIO5_19				0x168 0x448 0x000 0x1 0x0
-#define MX50_PAD_SD3_CLK__EIM_NANDF_RDN				0x168 0x448 0x000 0x2 0x0
-#define MX50_PAD_SD3_CLK__SSP_CLK				0x168 0x448 0x000 0x3 0x0
-#define MX50_PAD_SD3_D0__ESDHC3_DAT0				0x16c 0x44c 0x000 0x0 0x0
-#define MX50_PAD_SD3_D0__GPIO5_20				0x16c 0x44c 0x000 0x1 0x0
-#define MX50_PAD_SD3_D0__EIM_NANDF_D_4				0x16c 0x44c 0x000 0x2 0x0
-#define MX50_PAD_SD3_D0__SSP_D0					0x16c 0x44c 0x000 0x3 0x0
-#define MX50_PAD_SD3_D0__CCM_PLL1_BYP				0x16c 0x44c 0x6dc 0x7 0x1
-#define MX50_PAD_SD3_D1__ESDHC3_DAT1				0x170 0x450 0x000 0x0 0x0
-#define MX50_PAD_SD3_D1__GPIO5_21				0x170 0x450 0x000 0x1 0x0
-#define MX50_PAD_SD3_D1__EIM_NANDF_D_5				0x170 0x450 0x000 0x2 0x0
-#define MX50_PAD_SD3_D1__SSP_D1					0x170 0x450 0x000 0x3 0x0
-#define MX50_PAD_SD3_D1__CCM_PLL2_BYP				0x170 0x450 0x000 0x7 0x0
-#define MX50_PAD_SD3_D2__ESDHC3_DAT2				0x174 0x454 0x000 0x0 0x0
-#define MX50_PAD_SD3_D2__GPIO5_22				0x174 0x454 0x000 0x1 0x0
-#define MX50_PAD_SD3_D2__EIM_NANDF_D_6				0x174 0x454 0x000 0x2 0x0
-#define MX50_PAD_SD3_D2__SSP_D2					0x174 0x454 0x000 0x3 0x0
-#define MX50_PAD_SD3_D2__CCM_PLL3_BYP				0x174 0x454 0x6e4 0x7 0x1
-#define MX50_PAD_SD3_D3__ESDHC3_DAT3				0x178 0x458 0x000 0x0 0x0
-#define MX50_PAD_SD3_D3__GPIO5_23				0x178 0x458 0x000 0x1 0x0
-#define MX50_PAD_SD3_D3__EIM_NANDF_D_7				0x178 0x458 0x000 0x2 0x0
-#define MX50_PAD_SD3_D3__SSP_D3					0x178 0x458 0x000 0x3 0x0
-#define MX50_PAD_SD3_D4__ESDHC3_DAT4				0x17c 0x45c 0x000 0x0 0x0
-#define MX50_PAD_SD3_D4__GPIO5_24				0x17c 0x45c 0x000 0x1 0x0
-#define MX50_PAD_SD3_D4__EIM_NANDF_D_0				0x17c 0x45c 0x000 0x2 0x0
-#define MX50_PAD_SD3_D4__SSP_D4					0x17c 0x45c 0x000 0x3 0x0
-#define MX50_PAD_SD3_D5__ESDHC3_DAT5				0x180 0x460 0x000 0x0 0x0
-#define MX50_PAD_SD3_D5__GPIO5_25				0x180 0x460 0x000 0x1 0x0
-#define MX50_PAD_SD3_D5__EIM_NANDF_D_1				0x180 0x460 0x000 0x2 0x0
-#define MX50_PAD_SD3_D5__SSP_D5					0x180 0x460 0x000 0x3 0x0
-#define MX50_PAD_SD3_D6__ESDHC3_DAT6				0x184 0x464 0x000 0x0 0x0
-#define MX50_PAD_SD3_D6__GPIO5_26				0x184 0x464 0x000 0x1 0x0
-#define MX50_PAD_SD3_D6__EIM_NANDF_D_2				0x184 0x464 0x000 0x2 0x0
-#define MX50_PAD_SD3_D6__SSP_D6					0x184 0x464 0x000 0x3 0x0
-#define MX50_PAD_SD3_D7__ESDHC3_DAT7				0x188 0x468 0x000 0x0 0x0
-#define MX50_PAD_SD3_D7__GPIO5_27				0x188 0x468 0x000 0x1 0x0
-#define MX50_PAD_SD3_D7__EIM_NANDF_D_3				0x188 0x468 0x000 0x2 0x0
-#define MX50_PAD_SD3_D7__SSP_D7					0x188 0x468 0x000 0x3 0x0
-#define MX50_PAD_SD3_WP__ESDHC3_WP				0x18c 0x46C 0x000 0x0 0x0
-#define MX50_PAD_SD3_WP__GPIO5_28				0x18c 0x46C 0x000 0x1 0x0
-#define MX50_PAD_SD3_WP__EIM_NANDF_RESETN			0x18c 0x46C 0x000 0x2 0x0
-#define MX50_PAD_SD3_WP__SSP_CD					0x18c 0x46C 0x000 0x3 0x0
-#define MX50_PAD_SD3_WP__ESDHC4_LCTL				0x18c 0x46C 0x000 0x4 0x0
-#define MX50_PAD_SD3_WP__EIM_WEIM_CS_3				0x18c 0x46C 0x000 0x5 0x0
-#define MX50_PAD_DISP_D8__ELCDIF_DAT_8				0x190 0x470 0x71c 0x0 0x0
-#define MX50_PAD_DISP_D8__GPIO2_8				0x190 0x470 0x000 0x1 0x0
-#define MX50_PAD_DISP_D8__EIM_NANDF_CLE				0x190 0x470 0x000 0x2 0x0
-#define MX50_PAD_DISP_D8__ESDHC1_LCTL				0x190 0x470 0x000 0x3 0x0
-#define MX50_PAD_DISP_D8__ESDHC4_CMD				0x190 0x470 0x74c 0x4 0x2
-#define MX50_PAD_DISP_D8__KPP_COL_4				0x190 0x470 0x790 0x5 0x1
-#define MX50_PAD_DISP_D8__FEC_TX_CLK				0x190 0x470 0x78c 0x6 0x1
-#define MX50_PAD_DISP_D8__USBPHY1_DATAOUT_0			0x190 0x470 0x000 0x7 0x0
-#define MX50_PAD_DISP_D9__ELCDIF_DAT_9				0x194 0x474 0x720 0x0 0x0
-#define MX50_PAD_DISP_D9__GPIO2_9				0x194 0x474 0x000 0x1 0x0
-#define MX50_PAD_DISP_D9__EIM_NANDF_ALE				0x194 0x474 0x000 0x2 0x0
-#define MX50_PAD_DISP_D9__ESDHC2_LCTL				0x194 0x474 0x000 0x3 0x0
-#define MX50_PAD_DISP_D9__ESDHC4_CLK				0x194 0x474 0x748 0x4 0x2
-#define MX50_PAD_DISP_D9__KPP_ROW_4				0x194 0x474 0x7a0 0x5 0x1
-#define MX50_PAD_DISP_D9__FEC_RX_ER				0x194 0x474 0x788 0x6 0x1
-#define MX50_PAD_DISP_D9__USBPHY1_DATAOUT_1			0x194 0x474 0x000 0x7 0x0
-#define MX50_PAD_DISP_D10__ELCDIF_DAT_10			0x198 0x478 0x724 0x0 0x0
-#define MX50_PAD_DISP_D10__GPIO2_10				0x198 0x478 0x000 0x1 0x0
-#define MX50_PAD_DISP_D10__EIM_NANDF_CEN_0			0x198 0x478 0x000 0x2 0x0
-#define MX50_PAD_DISP_D10__ESDHC3_LCTL				0x198 0x478 0x000 0x3 0x0
-#define MX50_PAD_DISP_D10__ESDHC4_DAT0				0x198 0x478 0x000 0x4 0x0
-#define MX50_PAD_DISP_D10__KPP_COL_5				0x198 0x478 0x794 0x5 0x1
-#define MX50_PAD_DISP_D10__FEC_RX_DV				0x198 0x478 0x784 0x6 0x1
-#define MX50_PAD_DISP_D10__USBPHY1_DATAOUT_2			0x198 0x478 0x000 0x7 0x0
-#define MX50_PAD_DISP_D11__ELCDIF_DAT_11			0x19c 0x47c 0x728 0x0 0x0
-#define MX50_PAD_DISP_D11__GPIO2_11				0x19c 0x47c 0x000 0x1 0x0
-#define MX50_PAD_DISP_D11__EIM_NANDF_CEN_1			0x19c 0x47c 0x000 0x2 0x0
-#define MX50_PAD_DISP_D11__ESDHC4_DAT1				0x19c 0x47c 0x754 0x4 0x1
-#define MX50_PAD_DISP_D11__KPP_ROW_5				0x19c 0x47c 0x7a4 0x5 0x1
-#define MX50_PAD_DISP_D11__FEC_RDATA_1				0x19c 0x47c 0x77c 0x6 0x1
-#define MX50_PAD_DISP_D11__USBPHY1_DATAOUT_3			0x19c 0x47c 0x000 0x7 0x0
-#define MX50_PAD_DISP_D12__ELCDIF_DAT_12			0x1a0 0x480 0x72c 0x0 0x0
-#define MX50_PAD_DISP_D12__GPIO2_12				0x1a0 0x480 0x000 0x1 0x0
-#define MX50_PAD_DISP_D12__EIM_NANDF_CEN_2			0x1a0 0x480 0x000 0x2 0x0
-#define MX50_PAD_DISP_D12__ESDHC1_CD				0x1a0 0x480 0x000 0x3 0x0
-#define MX50_PAD_DISP_D12__ESDHC4_DAT2				0x1a0 0x480 0x758 0x4 0x1
-#define MX50_PAD_DISP_D12__KPP_COL_6				0x1a0 0x480 0x798 0x5 0x1
-#define MX50_PAD_DISP_D12__FEC_RDATA_0				0x1a0 0x480 0x778 0x6 0x1
-#define MX50_PAD_DISP_D12__USBPHY1_DATAOUT_4			0x1a0 0x480 0x000 0x7 0x0
-#define MX50_PAD_DISP_D13__ELCDIF_DAT_13			0x1a4 0x484 0x730 0x0 0x0
-#define MX50_PAD_DISP_D13__GPIO2_13				0x1a4 0x484 0x000 0x1 0x0
-#define MX50_PAD_DISP_D13__EIM_NANDF_CEN_3			0x1a4 0x484 0x000 0x2 0x0
-#define MX50_PAD_DISP_D13__ESDHC3_CD				0x1a4 0x484 0x000 0x3 0x0
-#define MX50_PAD_DISP_D13__ESDHC4_DAT3				0x1a4 0x484 0x75c 0x4 0x1
-#define MX50_PAD_DISP_D13__KPP_ROW_6				0x1a4 0x484 0x7a8 0x5 0x1
-#define MX50_PAD_DISP_D13__FEC_TX_EN				0x1a4 0x484 0x000 0x6 0x0
-#define MX50_PAD_DISP_D13__USBPHY1_DATAOUT_5			0x1a4 0x484 0x000 0x7 0x0
-#define MX50_PAD_DISP_D14__ELCDIF_DAT_14			0x1a8 0x488 0x734 0x0 0x0
-#define MX50_PAD_DISP_D14__GPIO2_14				0x1a8 0x488 0x000 0x1 0x0
-#define MX50_PAD_DISP_D14__EIM_NANDF_READY0			0x1a8 0x488 0x7b4 0x2 0x1
-#define MX50_PAD_DISP_D14__ESDHC1_WP				0x1a8 0x488 0x000 0x3 0x0
-#define MX50_PAD_DISP_D14__ESDHC4_WP				0x1a8 0x488 0x000 0x4 0x0
-#define MX50_PAD_DISP_D14__KPP_COL_7				0x1a8 0x488 0x79c 0x5 0x1
-#define MX50_PAD_DISP_D14__FEC_TDATA_1				0x1a8 0x488 0x000 0x6 0x0
-#define MX50_PAD_DISP_D14__USBPHY1_DATAOUT_6			0x1a8 0x488 0x000 0x7 0x0
-#define MX50_PAD_DISP_D15__ELCDIF_DAT_15			0x1ac 0x48c 0x738 0x0 0x0
-#define MX50_PAD_DISP_D15__GPIO2_15				0x1ac 0x48c 0x000 0x1 0x0
-#define MX50_PAD_DISP_D15__EIM_NANDF_DQS			0x1ac 0x48c 0x7b0 0x2 0x1
-#define MX50_PAD_DISP_D15__ESDHC3_RST				0x1ac 0x48c 0x000 0x3 0x0
-#define MX50_PAD_DISP_D15__ESDHC4_CD				0x1ac 0x48c 0x000 0x4 0x0
-#define MX50_PAD_DISP_D15__KPP_ROW_7				0x1ac 0x48c 0x7ac 0x5 0x1
-#define MX50_PAD_DISP_D15__FEC_TDATA_0				0x1ac 0x48c 0x000 0x6 0x0
-#define MX50_PAD_DISP_D15__USBPHY1_DATAOUT_7			0x1ac 0x48c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D0__EPDC_SDDO_0				0x1b0 0x54c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D0__GPIO3_0				0x1b0 0x54c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D0__EIM_WEIM_D_0				0x1b0 0x54c 0x7ec 0x2 0x1
-#define MX50_PAD_EPDC_D0__ELCDIF_RS				0x1b0 0x54c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D0__ELCDIF_DOTCLK				0x1b0 0x54c 0x000 0x4 0x0
-#define MX50_PAD_EPDC_D0__SDMA_DEBUG_EVT_CHN_LINES_0		0x1b0 0x54c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D0__USBPHY2_DATAOUT_0			0x1b0 0x54c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D1__EPDC_SDDO_1				0x1b4 0x550 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D1__GPIO3_1				0x1b4 0x550 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D1__EIM_WEIM_D_1				0x1b4 0x550 0x7f0 0x2 0x1
-#define MX50_PAD_EPDC_D1__ELCDIF_CS				0x1b4 0x550 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D1__ELCDIF_ENABLE				0x1b4 0x550 0x000 0x4 0x0
-#define MX50_PAD_EPDC_D1__SDMA_DEBUG_EVT_CHN_LINES_1		0x1b4 0x550 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D1__USBPHY2_DATAOUT_1			0x1b4 0x550 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D2__EPDC_SDDO_2				0x1b8 0x554 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D2__GPIO3_2				0x1b8 0x554 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D2__EIM_WEIM_D_2				0x1b8 0x554 0x7f4 0x2 0x1
-#define MX50_PAD_EPDC_D2__ELCDIF_WR_RWN				0x1b8 0x554 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC				0x1b8 0x554 0x73c 0x4 0x2
-#define MX50_PAD_EPDC_D2__SDMA_DEBUG_EVT_CHN_LINES_2		0x1b8 0x554 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D2__USBPHY2_DATAOUT_2			0x1b8 0x554 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D3__EPDC_SDDO_3				0x1bc 0x558 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D3__GPIO3_3				0x1bc 0x558 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D3__EIM_WEIM_D_3				0x1bc 0x558 0x7f8 0x2 0x1
-#define MX50_PAD_EPDC_D3__ELCDIF_RD_E				0x1bc 0x558 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC				0x1bc 0x558 0x6f8 0x4 0x3
-#define MX50_PAD_EPDC_D3__SDMA_DEBUG_EVT_CHN_LINES_3		0x1bc 0x558 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D3__USBPHY2_DATAOUT_3			0x1bc 0x558 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D4__EPDC_SDDO_4				0x1c0 0x55c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D4__GPIO3_4				0x1c0 0x55c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D4__EIM_WEIM_D_4				0x1c0 0x55c 0x7fc 0x2 0x1
-#define MX50_PAD_EPDC_D4__SDMA_DEBUG_EVT_CHN_LINES_4		0x1c0 0x55c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D4__USBPHY2_DATAOUT_4			0x1c0 0x55c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D5__EPDC_SDDO_5				0x1c4 0x560 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D5__GPIO3_5				0x1c4 0x560 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D5__EIM_WEIM_D_5				0x1c4 0x560 0x800 0x2 0x1
-#define MX50_PAD_EPDC_D5__SDMA_DEBUG_EVT_CHN_LINES_5		0x1c4 0x560 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D5__USBPHY2_DATAOUT_5			0x1c4 0x560 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D6__EPDC_SDDO_6				0x1c8 0x564 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D6__GPIO3_6				0x1c8 0x564 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D6__EIM_WEIM_D_6				0x1c8 0x564 0x804 0x2 0x1
-#define MX50_PAD_EPDC_D6__SDMA_DEBUG_EVT_CHN_LINES_6		0x1c8 0x564 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D6__USBPHY2_DATAOUT_6			0x1c8 0x564 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D7__EPDC_SDDO_7				0x1cc 0x568 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D7__GPIO3_7				0x1cc 0x568 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D7__EIM_WEIM_D_7				0x1cc 0x568 0x808 0x2 0x1
-#define MX50_PAD_EPDC_D7__SDMA_DEBUG_EVT_CHN_LINES_7		0x1cc 0x568 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D7__USBPHY2_DATAOUT_7			0x1cc 0x568 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D8__EPDC_SDDO_8				0x1d0 0x56c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D8__GPIO3_8				0x1d0 0x56c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D8__EIM_WEIM_D_8				0x1d0 0x56c 0x80c 0x2 0x2
-#define MX50_PAD_EPDC_D8__ELCDIF_DAT_24				0x1d0 0x56c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D8__SDMA_DEBUG_MATCHED_DMBUS		0x1d0 0x56c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D8__USBPHY2_VSTATUS_0			0x1d0 0x56c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D9__EPDC_SDDO_9				0x1d4 0x570 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D9__GPIO3_9				0x1d4 0x570 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D9__EIM_WEIM_D_9				0x1d4 0x570 0x810 0x2 0x2
-#define MX50_PAD_EPDC_D9__ELCDIF_DAT_25				0x1d4 0x570 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D9__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x1d4 0x570 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D9__USBPHY2_VSTATUS_1			0x1d4 0x570 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D10__EPDC_SDDO_10				0x1d8 0x574 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D10__GPIO3_10				0x1d8 0x574 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D10__EIM_WEIM_D_10			0x1d8 0x574 0x814 0x2 0x2
-#define MX50_PAD_EPDC_D10__ELCDIF_DAT_26			0x1d8 0x574 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D10__SDMA_DEBUG_EVENT_CHANNEL_0		0x1d8 0x574 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D10__USBPHY2_VSTATUS_2			0x1d8 0x574 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D11__EPDC_SDDO_11				0x1dc 0x578 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D11__GPIO3_11				0x1dc 0x578 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D11__EIM_WEIM_D_11			0x1dc 0x578 0x818 0x2 0x2
-#define MX50_PAD_EPDC_D11__ELCDIF_DAT_27			0x1dc 0x578 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D11__SDMA_DEBUG_EVENT_CHANNEL_1		0x1dc 0x578 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D11__USBPHY2_VSTATUS_3			0x1dc 0x578 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D12__EPDC_SDDO_12				0x1e0 0x57c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D12__GPIO3_12				0x1e0 0x57c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D12__EIM_WEIM_D_12			0x1e0 0x57c 0x81c 0x2 0x1
-#define MX50_PAD_EPDC_D12__ELCDIF_DAT_28			0x1e0 0x57c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D12__SDMA_DEBUG_EVENT_CHANNEL_2		0x1e0 0x57c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D12__USBPHY2_VSTATUS_4			0x1e0 0x57c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D13__EPDC_SDDO_13				0x1e4 0x580 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D13__GPIO3_13				0x1e4 0x580 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D13__EIM_WEIM_D_13			0x1e4 0x580 0x820 0x2 0x1
-#define MX50_PAD_EPDC_D13__ELCDIF_DAT_29			0x1e4 0x580 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D13__SDMA_DEBUG_EVENT_CHANNEL_3		0x1e4 0x580 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D13__USBPHY2_VSTATUS_5			0x1e4 0x580 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D14__EPDC_SDDO_14				0x1e8 0x584 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D14__GPIO3_14				0x1e8 0x584 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D14__EIM_WEIM_D_14			0x1e8 0x584 0x824 0x2 0x1
-#define MX50_PAD_EPDC_D14__ELCDIF_DAT_30			0x1e8 0x584 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D14__AUDMUX_AUD6_TXD			0x1e8 0x584 0x000 0x4 0x0
-#define MX50_PAD_EPDC_D14__SDMA_DEBUG_EVENT_CHANNEL_4		0x1e8 0x584 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D14__USBPHY2_VSTATUS_6			0x1e8 0x584 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D15__EPDC_SDDO_15				0x1ec 0x588 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D15__GPIO3_15				0x1ec 0x588 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D15__EIM_WEIM_D_15			0x1ec 0x588 0x828 0x2 0x1
-#define MX50_PAD_EPDC_D15__ELCDIF_DAT_31			0x1ec 0x588 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D15__AUDMUX_AUD6_TXC			0x1ec 0x588 0x000 0x4 0x0
-#define MX50_PAD_EPDC_D15__SDMA_DEBUG_EVENT_CHANNEL_5		0x1ec 0x588 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D15__USBPHY2_VSTATUS_7			0x1ec 0x588 0x000 0x7 0x0
-#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK				0x1f0 0x58c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_GDCLK__GPIO3_16				0x1f0 0x58c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_GDCLK__EIM_WEIM_D_16			0x1f0 0x58c 0x000 0x2 0x0
-#define MX50_PAD_EPDC_GDCLK__ELCDIF_DAT_16			0x1f0 0x58c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_GDCLK__AUDMUX_AUD6_TXFS			0x1f0 0x58c 0x000 0x4 0x0
-#define MX50_PAD_EPDC_GDCLK__SDMA_DEBUG_CORE_STATE_0		0x1f0 0x58c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_GDCLK__USBPHY2_BISTOK			0x1f0 0x58c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_GDSP__EPCD_GDSP				0x1f4 0x590 0x000 0x0 0x0
-#define MX50_PAD_EPDC_GDSP__GPIO3_17				0x1f4 0x590 0x000 0x1 0x0
-#define MX50_PAD_EPDC_GDSP__EIM_WEIM_D_17			0x1f4 0x590 0x000 0x2 0x0
-#define MX50_PAD_EPDC_GDSP__ELCDIF_DAT_17			0x1f4 0x590 0x000 0x3 0x0
-#define MX50_PAD_EPDC_GDSP__AUDMUX_AUD6_RXD			0x1f4 0x590 0x000 0x4 0x0
-#define MX50_PAD_EPDC_GDSP__SDMA_DEBUG_CORE_STATE_1		0x1f4 0x590 0x000 0x6 0x0
-#define MX50_PAD_EPDC_GDSP__USBPHY2_BVALID			0x1f4 0x590 0x000 0x7 0x0
-#define MX50_PAD_EPDC_GDOE__EPCD_GDOE				0x1f8 0x594 0x000 0x0 0x0
-#define MX50_PAD_EPDC_GDOE__GPIO3_18				0x1f8 0x594 0x000 0x1 0x0
-#define MX50_PAD_EPDC_GDOE__EIM_WEIM_D_18			0x1f8 0x594 0x000 0x2 0x0
-#define MX50_PAD_EPDC_GDOE__ELCDIF_DAT_18			0x1f8 0x594 0x000 0x3 0x0
-#define MX50_PAD_EPDC_GDOE__AUDMUX_AUD6_RXC			0x1f8 0x594 0x000 0x4 0x0
-#define MX50_PAD_EPDC_GDOE__SDMA_DEBUG_CORE_STATE_2		0x1f8 0x594 0x000 0x6 0x0
-#define MX50_PAD_EPDC_GDOE__USBPHY2_ENDSESSION			0x1f8 0x594 0x000 0x7 0x0
-#define MX50_PAD_EPDC_GDRL__EPCD_GDRL				0x1fc 0x598 0x000 0x0 0x0
-#define MX50_PAD_EPDC_GDRL__GPIO3_19				0x1fc 0x598 0x000 0x1 0x0
-#define MX50_PAD_EPDC_GDRL__EIM_WEIM_D_19			0x1f8 0x598 0x000 0x2 0x0
-#define MX50_PAD_EPDC_GDRL__ELCDIF_DAT_19			0x1fc 0x598 0x000 0x3 0x0
-#define MX50_PAD_EPDC_GDRL__AUDMUX_AUD6_RXFS			0x1fc 0x598 0x000 0x4 0x0
-#define MX50_PAD_EPDC_GDRL__SDMA_DEBUG_CORE_STATE_3		0x1fc 0x598 0x000 0x6 0x0
-#define MX50_PAD_EPDC_GDRL__USBPHY2_IDDIG			0x1fc 0x598 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDCLK__EPCD_SDCLK				0x200 0x59c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCLK__GPIO3_20				0x200 0x59c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCLK__EIM_WEIM_D_20			0x200 0x59c 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDCLK__ELCDIF_DAT_20			0x200 0x59c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_SDCLK__AUDMUX_AUD5_TXD			0x200 0x59c 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDCLK__SDMA_DEBUG_BUS_DEVICE_0		0x200 0x59c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDCLK__USBPHY2_HOSTDISCONNECT		0x200 0x59c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDOEZ__EPCD_SDOEZ				0x204 0x5a0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDOEZ__GPIO3_21				0x204 0x5a0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDOEZ__EIM_WEIM_D_21			0x204 0x5a0 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDOEZ__ELCDIF_DAT_21			0x204 0x5a0 0x000 0x3 0x0
-#define MX50_PAD_EPDC_SDOEZ__AUDMUX_AUD5_TXC			0x204 0x5a0 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDOEZ__SDMA_DEBUG_BUS_DEVICE_1		0x204 0x5a0 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDOEZ__USBPHY2_TXREADY			0x204 0x5a0 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDOED__EPCD_SDOED				0x208 0x5a4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDOED__GPIO3_22				0x208 0x5a4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDOED__EIM_WEIM_D_22			0x208 0x5a4 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDOED__ELCDIF_DAT_22			0x208 0x5a4 0x000 0x3 0x0
-#define MX50_PAD_EPDC_SDOED__AUDMUX_AUD5_TXFS			0x208 0x5a4 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDOED__SDMA_DEBUG_BUS_DEVICE_2		0x208 0x5a4 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDOED__USBPHY2_RXVALID			0x208 0x5a4 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDOE__EPCD_SDOE				0x20c 0x5a8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDOE__GPIO3_23				0x20c 0x5a8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDOE__EIM_WEIM_D_23			0x20c 0x5a8 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDOE__ELCDIF_DAT_23			0x20c 0x5a8 0x000 0x3 0x0
-#define MX50_PAD_EPDC_SDOE__AUDMUX_AUD5_RXD			0x20c 0x5a8 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDOE__SDMA_DEBUG_BUS_DEVICE_3		0x20c 0x5a8 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDOE__USBPHY2_RXACTIVE			0x20c 0x5a8 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDLE__EPCD_SDLE				0x210 0x5ac 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDLE__GPIO3_24				0x210 0x5ac 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDLE__EIM_WEIM_D_24			0x210 0x5ac 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDLE__ELCDIF_DAT_8			0x210 0x5ac 0x71c 0x3 0x1
-#define MX50_PAD_EPDC_SDLE__AUDMUX_AUD5_RXC			0x210 0x5ac 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDLE__SDMA_DEBUG_BUS_DEVICE_4		0x210 0x5ac 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDLE__USBPHY2_RXERROR			0x210 0x5ac 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDCLKN__EPCD_SDCLKN			0x214 0x5b0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCLKN__GPIO3_25				0x214 0x5b0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCLKN__EIM_WEIM_D_25			0x214 0x5b0 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDCLKN__ELCDIF_DAT_9			0x214 0x5b0 0x720 0x3 0x1
-#define MX50_PAD_EPDC_SDCLKN__AUDMUX_AUD5_RXFS			0x214 0x5b0 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDCLKN__SDMA_DEBUG_BUS_ERROR		0x214 0x5b0 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDCLKN__USBPHY2_SIECLOCK			0x214 0x5b0 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDSHR__EPCD_SDSHR				0x218 0x5b4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDSHR__GPIO3_26				0x218 0x5b4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDSHR__EIM_WEIM_D_26			0x218 0x5b4 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDSHR__ELCDIF_DAT_10			0x218 0x5b4 0x724 0x3 0x1
-#define MX50_PAD_EPDC_SDSHR__AUDMUX_AUD4_TXD			0x218 0x5b4 0x6c8 0x4 0x1
-#define MX50_PAD_EPDC_SDSHR__SDMA_DEBUG_BUS_RWB			0x218 0x5b4 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDSHR__USBPHY2_LINESTATE_0		0x218 0x5b4 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCOM__EPCD_PWRCOM			0x21c 0x5b8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCOM__GPIO3_27				0x21c 0x5b8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCOM__EIM_WEIM_D_27			0x21c 0x5b8 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCOM__ELCDIF_DAT_11			0x21c 0x5b8 0x728 0x3 0x1
-#define MX50_PAD_EPDC_PWRCOM__AUDMUX_AUD4_TXC			0x21c 0x5b8 0x6d4 0x4 0x1
-#define MX50_PAD_EPDC_PWRCOM__SDMA_DEBUG_CORE_RUN		0x21c 0x5b8 0x000 0x6 0x0
-#define MX50_PAD_EPDC_PWRCOM__USBPHY2_LINESTATE_1		0x21c 0x5b8 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRSTAT__EPCD_PWRSTAT			0x220 0x5bc 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRSTAT__GPIO3_28				0x220 0x5bc 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRSTAT__EIM_WEIM_D_28			0x220 0x5bc 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_DAT_12			0x220 0x5bc 0x72c 0x3 0x1
-#define MX50_PAD_EPDC_PWRSTAT__AUDMUX_AUD4_TXFS			0x220 0x5bc 0x6d8 0x4 0x1
-#define MX50_PAD_EPDC_PWRSTAT__SDMA_DEBUG_MODE			0x220 0x5bc 0x000 0x6 0x0
-#define MX50_PAD_EPDC_PWRSTAT__USBPHY2_VBUSVALID		0x220 0x5bc 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__EPCD_PWRCTRL0			0x224 0x5c0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__GPIO3_29			0x224 0x5c0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__EIM_WEIM_D_29			0x224 0x5c0 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_DAT_13			0x224 0x5c0 0x730 0x3 0x1
-#define MX50_PAD_EPDC_PWRCTRL0__AUDMUX_AUD4_RXD			0x224 0x5c0 0x6c4 0x4 0x1
-#define MX50_PAD_EPDC_PWRCTRL0__SDMA_DEBUG_RTBUFFER_WRITE	0x224 0x5c0 0x000 0x6 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__USBPHY2_AVALID			0x224 0x5c0 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__EPCD_PWRCTRL1			0x228 0x5c4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__GPIO3_30			0x228 0x5c4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__EIM_WEIM_D_30			0x228 0x5c4 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_DAT_14			0x228 0x5c4 0x734 0x3 0x1
-#define MX50_PAD_EPDC_PWRCTRL1__AUDMUX_AUD4_RXC			0x228 0x5c4 0x6cc 0x4 0x1
-#define MX50_PAD_EPDC_PWRCTRL1__SDMA_DEBUG_YIELD		0x228 0x5c4 0x000 0x6 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__USBPHY1_ONBIST			0x228 0x5c4 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCTRL2__EPCD_PWRCTRL2			0x22c 0x5c8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCTRL2__GPIO3_31			0x22c 0x5c8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCTRL2__EIM_WEIM_D_31			0x22c 0x5c8 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_DAT_15			0x22c 0x5c8 0x738 0x3 0x1
-#define MX50_PAD_EPDC_PWRCTRL2__AUDMUX_AUD4_RXFS		0x22c 0x5c8 0x6d0 0x4 0x1
-#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT_EVENT_0		0x22c 0x5c8 0x7b8 0x6 0x1
-#define MX50_PAD_EPDC_PWRCTRL2__USBPHY2_ONBIST			0x22c 0x5c8 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCTRL3__EPCD_PWRCTRL3			0x230 0x5cc 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCTRL3__GPIO4_20			0x230 0x5cc 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCTRL3__EIM_WEIM_EB_2			0x230 0x5cc 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT_EVENT_1		0x230 0x5cc 0x7bc 0x6 0x1
-#define MX50_PAD_EPDC_PWRCTRL3__USBPHY1_BISTOK			0x230 0x5cc 0x000 0x7 0x0
-#define MX50_PAD_EPDC_VCOM0__EPCD_VCOM_0			0x234 0x5d0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_VCOM0__GPIO4_21				0x234 0x5d0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_VCOM0__EIM_WEIM_EB_3			0x234 0x5d0 0x000 0x2 0x0
-#define MX50_PAD_EPDC_VCOM0__USBPHY2_BISTOK			0x234 0x5d0 0x000 0x7 0x0
-#define MX50_PAD_EPDC_VCOM1__EPCD_VCOM_1			0x238 0x5d4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_VCOM1__GPIO4_22				0x238 0x5d4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_VCOM1__EIM_WEIM_CS_3			0x238 0x5d4 0x000 0x2 0x0
-#define MX50_PAD_EPDC_BDR0__EPCD_BDR_0				0x23c 0x5d8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_BDR0__GPIO4_23				0x23c 0x5d8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_BDR0__ELCDIF_DAT_7			0x23c 0x5d8 0x718 0x3 0x1
-#define MX50_PAD_EPDC_BDR1__EPCD_BDR_1				0x240 0x5dc 0x000 0x0 0x0
-#define MX50_PAD_EPDC_BDR1__GPIO4_24				0x240 0x5dc 0x000 0x1 0x0
-#define MX50_PAD_EPDC_BDR1__ELCDIF_DAT_6			0x240 0x5dc 0x714 0x3 0x1
-#define MX50_PAD_EPDC_SDCE0__EPCD_SDCE_0			0x244 0x5e0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE0__GPIO4_25				0x244 0x5e0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE0__ELCDIF_DAT_5			0x244 0x5e0 0x710 0x3 0x1
-#define MX50_PAD_EPDC_SDCE1__EPCD_SDCE_1			0x248 0x5e4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE1__GPIO4_26				0x248 0x5e4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE1__ELCDIF_DAT_4			0x248 0x5e4 0x70c 0x3 0x0
-#define MX50_PAD_EPDC_SDCE2__EPCD_SDCE_2			0x24c 0x5e8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE2__GPIO4_27				0x24c 0x5e8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT_3			0x24c 0x5e8 0x708 0x3 0x1
-#define MX50_PAD_EPDC_SDCE3__EPCD_SDCE_3			0x250 0x5ec 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE3__GPIO4_28				0x250 0x5ec 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE3__ELCDIF_DAT_2			0x250 0x5ec 0x704 0x3 0x1
-#define MX50_PAD_EPDC_SDCE4__EPCD_SDCE_4			0x254 0x5f0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE4__GPIO4_29				0x254 0x5f0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE4__ELCDIF_DAT_1			0x254 0x5f0 0x700 0x3 0x1
-#define MX50_PAD_EPDC_SDCE5__EPCD_SDCE_5			0x258 0x5f4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE5__GPIO4_30				0x258 0x5f4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE5__ELCDIF_DAT_0			0x258 0x5f4 0x6fc 0x3 0x1
-#define MX50_PAD_EIM_DA0__EIM_WEIM_A_0				0x25c 0x5f8 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA0__GPIO1_0				0x25c 0x5f8 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA0__KPP_COL_4				0x25c 0x5f8 0x790 0x3 0x2
-#define MX50_PAD_EIM_DA0__TPIU_TRACE_0				0x25c 0x5f8 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA0__SRC_BT_CFG1_0				0x25c 0x5f8 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA1__EIM_WEIM_A_1				0x260 0x5fc 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA1__GPIO1_1				0x260 0x5fc 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA1__KPP_ROW_4				0x260 0x5fc 0x7a0 0x3 0x2
-#define MX50_PAD_EIM_DA1__TPIU_TRACE_1				0x260 0x5fc 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA1__SRC_BT_CFG1_1				0x260 0x5fc 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA2__EIM_WEIM_A_2				0x264 0x600 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA2__GPIO1_2				0x264 0x600 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA2__KPP_COL_5				0x264 0x600 0x794 0x3 0x2
-#define MX50_PAD_EIM_DA2__TPIU_TRACE_2				0x264 0x600 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA2__SRC_BT_CFG1_2				0x264 0x600 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA3__EIM_WEIM_A_3				0x268 0x604 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA3__GPIO1_3				0x268 0x604 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA3__KPP_ROW_5				0x268 0x604 0x7a4 0x3 0x2
-#define MX50_PAD_EIM_DA3__TPIU_TRACE_3				0x268 0x604 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA3__SRC_BT_CFG1_3				0x268 0x604 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA4__EIM_WEIM_A_4				0x26c 0x608 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA4__GPIO1_4				0x26c 0x608 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA4__KPP_COL_6				0x26c 0x608 0x798 0x3 0x2
-#define MX50_PAD_EIM_DA4__TPIU_TRACE_4				0x26c 0x608 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA4__SRC_BT_CFG1_4				0x26c 0x608 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA5__EIM_WEIM_A_5				0x270 0x60c 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA5__GPIO1_5				0x270 0x60c 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA5__KPP_ROW_6				0x270 0x60c 0x7a8 0x3 0x2
-#define MX50_PAD_EIM_DA5__TPIU_TRACE_5				0x270 0x60c 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA5__SRC_BT_CFG1_5				0x270 0x60c 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA6__EIM_WEIM_A_6				0x274 0x610 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA6__GPIO1_6				0x274 0x610 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA6__KPP_COL_7				0x274 0x610 0x79c 0x3 0x2
-#define MX50_PAD_EIM_DA6__TPIU_TRACE_6				0x274 0x610 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA6__SRC_BT_CFG1_6				0x274 0x610 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA7__EIM_WEIM_A_7				0x278 0x614 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA7__GPIO1_7				0x278 0x614 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA7__KPP_ROW_7				0x278 0x614 0x7ac 0x3 0x2
-#define MX50_PAD_EIM_DA7__TPIU_TRACE_7				0x278 0x614 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA7__SRC_BT_CFG1_7				0x278 0x614 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA8__EIM_WEIM_A_8				0x27c 0x618 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA8__GPIO1_8				0x27c 0x618 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA8__EIM_NANDF_CLE				0x27c 0x618 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA8__TPIU_TRACE_8				0x27c 0x618 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA8__SRC_BT_CFG2_0				0x27c 0x618 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA9__EIM_WEIM_A_9				0x280 0x61c 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA9__GPIO1_9				0x280 0x61c 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA9__EIM_NANDF_ALE				0x280 0x61c 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA9__TPIU_TRACE_9				0x280 0x61c 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA9__SRC_BT_CFG2_1				0x280 0x61c 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA10__EIM_WEIM_A_10			0x284 0x620 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA10__GPIO1_10				0x284 0x620 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA10__EIM_NANDF_CEN_0			0x284 0x620 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA10__TPIU_TRACE_10			0x284 0x620 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA10__SRC_BT_CFG2_2			0x284 0x620 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA11__EIM_WEIM_A_11			0x288 0x624 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA11__GPIO1_11				0x288 0x624 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA11__EIM_NANDF_CEN_1			0x288 0x624 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA11__TPIU_TRACE_11			0x288 0x624 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA11__SRC_BT_CFG2_3			0x288 0x624 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA12__EIM_WEIM_A_12			0x28c 0x628 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA12__GPIO1_12				0x28c 0x628 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA12__EIM_NANDF_CEN_2			0x28c 0x628 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA12__EPDC_SDCE_6				0x28c 0x628 0x000 0x3 0x0
-#define MX50_PAD_EIM_DA12__TPIU_TRACE_12			0x28c 0x628 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA12__SRC_BT_CFG2_4			0x28c 0x628 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA13__EIM_WEIM_A_13			0x290 0x62c 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA13__GPIO1_13				0x290 0x62c 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA13__EIM_NANDF_CEN_3			0x290 0x62c 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA13__EPDC_SDCE_7				0x290 0x62c 0x000 0x3 0x0
-#define MX50_PAD_EIM_DA13__TPIU_TRACE_13			0x290 0x62c 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA13__SRC_BT_CFG2_5			0x290 0x62c 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA14__EIM_WEIM_A_14			0x294 0x630 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA14__GPIO1_14				0x294 0x630 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA14__EIM_NANDF_READY0			0x294 0x630 0x7b4 0x2 0x2
-#define MX50_PAD_EIM_DA14__EPDC_SDCE_8				0x294 0x630 0x000 0x3 0x0
-#define MX50_PAD_EIM_DA14__TPIU_TRACE_14			0x294 0x630 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA14__SRC_BT_CFG2_6			0x294 0x630 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA15__EIM_WEIM_A_15			0x298 0x634 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA15__GPIO1_15				0x298 0x634 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA15__EIM_NANDF_DQS			0x298 0x634 0x7b0 0x2 0x2
-#define MX50_PAD_EIM_DA15__EPDC_SDCE_9				0x298 0x634 0x000 0x3 0x0
-#define MX50_PAD_EIM_DA15__TPIU_TRACE_15			0x298 0x634 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA15__SRC_BT_CFG2_7			0x298 0x634 0x000 0x7 0x0
-#define MX50_PAD_EIM_CS2__EIM_WEIM_CS_2				0x29c 0x638 0x000 0x0 0x0
-#define MX50_PAD_EIM_CS2__GPIO1_16				0x29c 0x638 0x000 0x1 0x0
-#define MX50_PAD_EIM_CS2__EIM_WEIM_A_27				0x29c 0x638 0x000 0x2 0x0
-#define MX50_PAD_EIM_CS2__TPIU_TRCLK				0x29c 0x638 0x000 0x6 0x0
-#define MX50_PAD_EIM_CS2__SRC_BT_CFG3_0				0x29c 0x638 0x000 0x7 0x0
-#define MX50_PAD_EIM_CS1__EIM_WEIM_CS_1				0x2a0 0x63c 0x000 0x0 0x0
-#define MX50_PAD_EIM_CS1__GPIO1_17				0x2a0 0x63c 0x000 0x1 0x0
-#define MX50_PAD_EIM_CS1__TPIU_TRCTL				0x2a0 0x63c 0x000 0x6 0x0
-#define MX50_PAD_EIM_CS1__SRC_BT_CFG3_1				0x2a0 0x63c 0x000 0x7 0x0
-#define MX50_PAD_EIM_CS0__EIM_WEIM_CS_0				0x2a4 0x640 0x000 0x0 0x0
-#define MX50_PAD_EIM_CS0__GPIO1_18				0x2a4 0x640 0x000 0x1 0x0
-#define MX50_PAD_EIM_CS0__SRC_BT_CFG3_2				0x2a4 0x640 0x000 0x7 0x0
-#define MX50_PAD_EIM_EB0__EIM_WEIM_EB_0				0x2a8 0x644 0x000 0x0 0x0
-#define MX50_PAD_EIM_EB0__GPIO1_19				0x2a8 0x644 0x000 0x1 0x0
-#define MX50_PAD_EIM_EB0__SRC_BT_CFG3_3				0x2a8 0x644 0x000 0x7 0x0
-#define MX50_PAD_EIM_EB1__EIM_WEIM_EB_1				0x2ac 0x648 0x000 0x0 0x0
-#define MX50_PAD_EIM_EB1__GPIO1_20				0x2ac 0x648 0x000 0x1 0x0
-#define MX50_PAD_EIM_EB1__SRC_BT_CFG3_4				0x2ac 0x648 0x000 0x7 0x0
-#define MX50_PAD_EIM_WAIT__EIM_WEIM_WAIT			0x2b0 0x64c 0x000 0x0 0x0
-#define MX50_PAD_EIM_WAIT__GPIO1_21				0x2b0 0x64c 0x000 0x1 0x0
-#define MX50_PAD_EIM_WAIT__EIM_WEIM_DTACK_B			0x2b0 0x64c 0x000 0x2 0x0
-#define MX50_PAD_EIM_WAIT__SRC_BT_CFG3_5			0x2b0 0x64c 0x000 0x7 0x0
-#define MX50_PAD_EIM_BCLK__EIM_WEIM_BCLK			0x2b4 0x650 0x000 0x0 0x0
-#define MX50_PAD_EIM_BCLK__GPIO1_22				0x2b4 0x650 0x000 0x1 0x0
-#define MX50_PAD_EIM_BCLK__SRC_BT_CFG3_6			0x2b4 0x650 0x000 0x7 0x0
-#define MX50_PAD_EIM_RDY__EIM_WEIM_RDY				0x2b8 0x654 0x000 0x0 0x0
-#define MX50_PAD_EIM_RDY__GPIO1_23				0x2b8 0x654 0x000 0x1 0x0
-#define MX50_PAD_EIM_RDY__SRC_BT_CFG3_7				0x2b8 0x654 0x000 0x7 0x0
-#define MX50_PAD_EIM_OE__EIM_WEIM_OE				0x2bc 0x658 0x000 0x0 0x0
-#define MX50_PAD_EIM_OE__GPIO1_24				0x2bc 0x658 0x000 0x1 0x0
-#define MX50_PAD_EIM_OE__INT_BOOT				0x2bc 0x658 0x000 0x7 0x0
-#define MX50_PAD_EIM_RW__EIM_WEIM_RW				0x2c0 0x65c 0x000 0x0 0x0
-#define MX50_PAD_EIM_RW__GPIO1_25				0x2c0 0x65c 0x000 0x1 0x0
-#define MX50_PAD_EIM_RW__SYSTEM_RST				0x2c0 0x65c 0x000 0x7 0x0
-#define MX50_PAD_EIM_LBA__EIM_WEIM_LBA				0x2c4 0x660 0x000 0x0 0x0
-#define MX50_PAD_EIM_LBA__GPIO1_26				0x2c4 0x660 0x000 0x1 0x0
-#define MX50_PAD_EIM_LBA__TESTER_ACK				0x2c4 0x660 0x000 0x7 0x0
-#define MX50_PAD_EIM_CRE__EIM_WEIM_CRE				0x2c8 0x664 0x000 0x0 0x0
-#define MX50_PAD_EIM_CRE__GPIO1_27				0x2c8 0x664 0x000 0x1 0x0
-
-#endif /* __DTS_IMX50_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
deleted file mode 100644
index 3d9a9f37f672b..0000000000000
--- a/arch/arm/boot/dts/imx50.dtsi
+++ /dev/null
@@ -1,499 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include "imx50-pinfunc.h"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/imx5-clock.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		mmc0 = &esdhc1;
-		mmc1 = &esdhc2;
-		mmc2 = &esdhc3;
-		mmc3 = &esdhc4;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &cspi;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0x0>;
-		};
-	};
-
-	tzic: tz-interrupt-controller@fffc000 {
-		compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x0fffc000 0x4000>;
-	};
-
-	clocks {
-		ckil {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-
-		ckih1 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <22579200>;
-		};
-
-		ckih2 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		osc {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	usbphy0: usbphy-0 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
-		clock-names = "main_clk";
-		#phy-cells = <0>;
-		status = "okay";
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&tzic>;
-		ranges;
-
-		aips1: bus@50000000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x10000000>;
-			ranges;
-
-			spba-bus@50000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x50000000 0x40000>;
-				ranges;
-
-				esdhc1: mmc@50004000 {
-					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
-					reg = <0x50004000 0x4000>;
-					interrupts = <1>;
-					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-						 <&clks IMX5_CLK_DUMMY>,
-						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				esdhc2: mmc@50008000 {
-					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
-					reg = <0x50008000 0x4000>;
-					interrupts = <2>;
-					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-						 <&clks IMX5_CLK_DUMMY>,
-						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				uart3: serial@5000c000 {
-					compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-					reg = <0x5000c000 0x4000>;
-					interrupts = <33>;
-					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-						 <&clks IMX5_CLK_UART3_PER_GATE>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi1: spi@50010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
-					reg = <0x50010000 0x4000>;
-					interrupts = <36>;
-					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ssi2: ssi@50014000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx50-ssi",
-							"fsl,imx51-ssi",
-							"fsl,imx21-ssi";
-					reg = <0x50014000 0x4000>;
-					interrupts = <30>;
-					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
-					dmas = <&sdma 24 1 0>,
-					       <&sdma 25 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				esdhc3: mmc@50020000 {
-					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
-					reg = <0x50020000 0x4000>;
-					interrupts = <3>;
-					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-						 <&clks IMX5_CLK_DUMMY>,
-						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				esdhc4: mmc@50024000 {
-					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
-					reg = <0x50024000 0x4000>;
-					interrupts = <4>;
-					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-						 <&clks IMX5_CLK_DUMMY>,
-						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-			};
-
-			usbotg: usb@53f80000 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80000 0x0200>;
-				interrupts = <18>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				fsl,usbphy = <&usbphy0>;
-				status = "disabled";
-			};
-
-			usbh1: usb@53f80200 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80200 0x0200>;
-				interrupts = <14>;
-				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			gpio1: gpio@53f84000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53f84000 0x4000>;
-				interrupts = <50 51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 151 28>;
-			};
-
-			gpio2: gpio@53f88000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53f88000 0x4000>;
-				interrupts = <52 53>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc  0 75 8>, <&iomuxc 8 100 8>,
-					      <&iomuxc 16 83 1>, <&iomuxc 17 85 1>,
-					      <&iomuxc 18 87 1>, <&iomuxc 19 84 1>,
-					      <&iomuxc 20 88 1>, <&iomuxc 21 86 1>;
-			};
-
-			gpio3: gpio@53f8c000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53f8c000 0x4000>;
-				interrupts = <54 55>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 108 32>;
-			};
-
-			gpio4: gpio@53f90000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53f90000 0x4000>;
-				interrupts = <56 57>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc  0   8  8>, <&iomuxc 8 45 12>,
-					      <&iomuxc 20 140 11>;
-			};
-
-			wdog1: watchdog@53f98000 {
-				compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
-				reg = <0x53f98000 0x4000>;
-				interrupts = <58>;
-				clocks = <&clks IMX5_CLK_DUMMY>;
-			};
-
-			gpt: timer@53fa0000 {
-				compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
-				reg = <0x53fa0000 0x4000>;
-				interrupts = <39>;
-				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-					 <&clks IMX5_CLK_GPT_HF_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			iomuxc: iomuxc@53fa8000 {
-				compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
-				reg = <0x53fa8000 0x4000>;
-			};
-
-			pwm1: pwm@53fb4000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
-				reg = <0x53fb4000 0x4000>;
-				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-					 <&clks IMX5_CLK_PWM1_HF_GATE>;
-				clock-names = "ipg", "per";
-				interrupts = <61>;
-			};
-
-			pwm2: pwm@53fb8000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
-				reg = <0x53fb8000 0x4000>;
-				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-					 <&clks IMX5_CLK_PWM2_HF_GATE>;
-				clock-names = "ipg", "per";
-				interrupts = <94>;
-			};
-
-			uart1: serial@53fbc000 {
-				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-				reg = <0x53fbc000 0x4000>;
-				interrupts = <31>;
-				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-					 <&clks IMX5_CLK_UART1_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@53fc0000 {
-				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-				reg = <0x53fc0000 0x4000>;
-				interrupts = <32>;
-				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-					 <&clks IMX5_CLK_UART2_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			src: reset-controller@53fd0000 {
-				compatible = "fsl,imx50-src", "fsl,imx51-src";
-				reg = <0x53fd0000 0x4000>;
-				interrupts = <75>;
-				#reset-cells = <1>;
-			};
-
-			clks: ccm@53fd4000{
-				compatible = "fsl,imx50-ccm";
-				reg = <0x53fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
-				#clock-cells = <1>;
-			};
-
-			gpio5: gpio@53fdc000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53fdc000 0x4000>;
-				interrupts = <103 104>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 57 18>, <&iomuxc 18 89 11>;
-			};
-
-			gpio6: gpio@53fe0000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53fe0000 0x4000>;
-				interrupts = <105 106>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 27 18>, <&iomuxc 18 16 11>;
-			};
-
-			i2c3: i2c@53fec000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
-				reg = <0x53fec000 0x4000>;
-				interrupts = <64>;
-				clocks = <&clks IMX5_CLK_I2C3_GATE>;
-				status = "disabled";
-			};
-
-			uart4: serial@53ff0000 {
-				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-				reg = <0x53ff0000 0x4000>;
-				interrupts = <13>;
-				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
-					 <&clks IMX5_CLK_UART4_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-
-		aips2: bus@60000000 {	/* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x60000000 0x10000000>;
-			ranges;
-
-			uart5: serial@63f90000 {
-				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-				reg = <0x63f90000 0x4000>;
-				interrupts = <86>;
-				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
-					 <&clks IMX5_CLK_UART5_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			owire: owire@63fa4000 {
-				compatible = "fsl,imx50-owire", "fsl,imx21-owire";
-				reg = <0x63fa4000 0x4000>;
-				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
-				status = "disabled";
-			};
-
-			ecspi2: spi@63fac000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
-				reg = <0x63fac000 0x4000>;
-				interrupts = <37>;
-				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			sdma: dma-controller@63fb0000 {
-				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
-				reg = <0x63fb0000 0x4000>;
-				interrupts = <6>;
-				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-					 <&clks IMX5_CLK_AHB>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
-			};
-
-			cspi: spi@63fc0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
-				reg = <0x63fc0000 0x4000>;
-				interrupts = <38>;
-				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c2: i2c@63fc4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
-				reg = <0x63fc4000 0x4000>;
-				interrupts = <63>;
-				clocks = <&clks IMX5_CLK_I2C2_GATE>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@63fc8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
-				reg = <0x63fc8000 0x4000>;
-				interrupts = <62>;
-				clocks = <&clks IMX5_CLK_I2C1_GATE>;
-				status = "disabled";
-			};
-
-			ssi1: ssi@63fcc000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx50-ssi", "fsl,imx51-ssi",
-							"fsl,imx21-ssi";
-				reg = <0x63fcc000 0x4000>;
-				interrupts = <29>;
-				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
-				dmas = <&sdma 28 0 0>,
-				       <&sdma 29 0 0>;
-				dma-names = "rx", "tx";
-				fsl,fifo-depth = <15>;
-				status = "disabled";
-			};
-
-			audmux: audmux@63fd0000 {
-				compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
-				reg = <0x63fd0000 0x4000>;
-				status = "disabled";
-			};
-
-			fec: ethernet@63fec000 {
-				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
-				reg = <0x63fec000 0x4000>;
-				interrupts = <87>;
-				clocks = <&clks IMX5_CLK_FEC_GATE>,
-					 <&clks IMX5_CLK_FEC_GATE>,
-					 <&clks IMX5_CLK_FEC_GATE>;
-				clock-names = "ipg", "ahb", "ptp";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
deleted file mode 100644
index ba28ffe06fe23..0000000000000
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
- *
- * Based on mx51-babbage.dts
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Armadeus Systems APF51 module";
-	compatible = "armadeus,imx51-apf51", "fsl,imx51";
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x20000000>;
-	};
-
-	clocks {
-		osc {
-			clock-frequency = <33554432>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-apf51 {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
deleted file mode 100644
index b61d55ca14676..0000000000000
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ /dev/null
@@ -1,217 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Armadeus Systems - <support@armadeus.com>
- */
-
-/* APF51Dev is a docking board for the APF51 SOM */
-#include "imx51-apf51.dts"
-
-/ {
-	model = "Armadeus Systems APF51Dev docking/development board";
-	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
-
-	backlight {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		compatible = "gpio-backlight";
-		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-		default-on;
-	};
-
-	disp1 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		display-timings {
-			lw700 {
-				native-mode;
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			display_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp1>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-key {
-			label = "user";
-			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-			linux,code = <256>; /* BTN_0 */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-user {
-			label = "Heartbeat";
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
-		   <&gpio4 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
-		   <&gpio3 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx51-apf51dev {
-		pinctrl_backlight: backlightgrp {
-			fsl,pins = <
-				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX51_PAD_EIM_EB2__GPIO2_22   0x0C5
-				MX51_PAD_EIM_EB3__GPIO2_23   0x0C5
-				MX51_PAD_EIM_CS4__GPIO2_29   0x100
-				MX51_PAD_NANDF_D13__GPIO3_27 0x0C5
-				MX51_PAD_NANDF_D12__GPIO3_28 0x0C5
-				MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5
-				MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5
-				MX51_PAD_GPIO1_2__GPIO1_2    0x0C5
-				MX51_PAD_GPIO1_3__GPIO1_3    0x0C5
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX51_PAD_NANDF_RB3__ECSPI2_MISO		0x185
-				MX51_PAD_NANDF_D15__ECSPI2_MOSI		0x185
-				MX51_PAD_NANDF_RB2__ECSPI2_SCLK		0x185
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D27__I2C2_SCL		0x400001ed
-				MX51_PAD_EIM_D24__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
-				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
-				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
-				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
-				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
-				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
-				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
-				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
-				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
-				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
-				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
-				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
-				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
-				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
-				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
-				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
-				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
-				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
-				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
-				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
-				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
-				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
-				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
-				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
-				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
-				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
-			>;
-		};
-	};
-};
-
-&ipu_di0_disp1 {
-	remote-endpoint = <&display_in>;
-};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
deleted file mode 100644
index a1f9c6a722752..0000000000000
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ /dev/null
@@ -1,726 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Freescale i.MX51 Babbage Board";
-	compatible = "fsl,imx51-babbage", "fsl,imx51";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x20000000>;
-	};
-
-	ckih1 {
-		clock-frequency = <22579200>;
-	};
-
-	clk_osc: clk-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	clk_osc_gate: clk-osc-gate {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clk26mhz_osc>;
-		clocks = <&clk_osc>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	clk_audio: clk-audio {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clk26mhz_audio>;
-		clocks = <&clk_osc_gate>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	};
-
-	clk_usb: clk-usb {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clk26mhz_usb>;
-		clocks = <&clk_osc_gate>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-	};
-
-	display1: disp1 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		port@0 {
-		reg = <0>;
-
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			parallel_display_out: endpoint {
-				remote-endpoint = <&tfp410_in>;
-			};
-		};
-	};
-
-	display2: disp2 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb565";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp2>;
-		status = "disabled";
-		display-timings {
-			native-mode = <&timing1>;
-			timing1: claawvga {
-				clock-frequency = <27000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <40>;
-				hfront-porch = <60>;
-				vback-porch = <10>;
-				vfront-porch = <10>;
-				hsync-len = <20>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp2>;
-			};
-		};
-	};
-
-	dvi-connector {
-		compatible = "dvi-connector";
-		digital;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	dvi-encoder {
-		compatible = "ti,tfp410";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&parallel_display_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		key-power {
-			label = "Power Button";
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led-diagnostic {
-			label = "diagnostic";
-			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_hub_reset: regulator@0 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbotgreg>;
-			reg = <0>;
-			regulator-name = "hub_reset";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx51-babbage-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx51-babbage-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-	};
-
-	usbphy1: usbphy1 {
-		compatible = "usb-nop-xceiv";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1reg>;
-		clocks = <&clk_usb>;
-		clock-names = "main_clk";
-		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&vusb_reg>;
-		#phy-cells = <0>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pmic: mc13892@0 {
-		compatible = "fsl,mc13892";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		spi-max-frequency = <6000000>;
-		spi-cs-high;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,mc13xxx-uses-adc;
-		fsl,mc13xxx-uses-rtc;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1375000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vdig_reg: vdig {
-				regulator-min-microvolt = <1650000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-			};
-
-			vsd_reg: vsd {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3150000>;
-			};
-
-			vusb_reg: vusb {
-				regulator-boot-on;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-min-microvolt = <2400000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vvideo_reg: vvideo {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-min-microvolt = <2300000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2900000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	flash: at45db321d@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "Kernel";
-			reg = <0x40000 0x3c0000>;
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		clocks = <&clk_audio>;
-		VDDA-supply = <&vdig_reg>;
-		VDDIO-supply = <&vvideo_reg>;
-	};
-};
-
-&ipu_di0_disp1 {
-	remote-endpoint = <&display0_in>;
-};
-
-&ipu_di1_disp2 {
-	remote-endpoint = <&display1_in>;
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_UP)
-		MATRIX_KEY(0, 1, KEY_DOWN)
-		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
-		MATRIX_KEY(0, 3, KEY_HOME)
-		MATRIX_KEY(1, 0, KEY_RIGHT)
-		MATRIX_KEY(1, 1, KEY_LEFT)
-		MATRIX_KEY(1, 2, KEY_ENTER)
-		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
-		MATRIX_KEY(2, 0, KEY_F6)
-		MATRIX_KEY(2, 1, KEY_F8)
-		MATRIX_KEY(2, 2, KEY_F9)
-		MATRIX_KEY(2, 3, KEY_F10)
-		MATRIX_KEY(3, 0, KEY_F1)
-		MATRIX_KEY(3, 1, KEY_F2)
-		MATRIX_KEY(3, 2, KEY_F3)
-		MATRIX_KEY(3, 3, KEY_POWER)
-	>;
-	status = "okay";
-};
-
-&pmu {
-	secure-reg-access;
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_hub_reset>;
-	fsl,usbphy = <&usbphy1>;
-	phy_type = "ulpi";
-	status = "okay";
-};
-
-&usbphy0 {
-	vcc-supply = <&vusb_reg>;
-};
-
-&usbotg {
-	dr_mode = "otg";
-	disable-over-current;
-	phy_type = "utmi_wide";
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-babbage {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
-				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
-				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
-				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
-			>;
-		};
-
-		pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
-			>;
-		};
-
-		pinctrl_clk26mhz_osc: clk26mhzoscgrp {
-			fsl,pins = <
-				MX51_PAD_DI1_PIN12__GPIO3_1		0x85
-			>;
-		};
-
-		pinctrl_clk26mhz_usb: clk26mhzusbgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D17__GPIO2_1		0x85
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
-				MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-				MX51_PAD_GPIO1_0__GPIO1_0		0x100
-				MX51_PAD_GPIO1_1__GPIO1_1		0x100
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-				MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
-				MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
-				MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
-				MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
-				MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
-				MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
-				MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
-				MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
-				MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
-				MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
-				MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
-				MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
-				MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
-				MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
-				MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
-				MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
-				MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
-				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
-				MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
-				MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
-			>;
-		};
-
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_A27__GPIO2_21		0x5
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D22__GPIO2_6		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
-				MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
-				MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
-				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
-				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
-				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
-				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
-				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
-				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
-				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
-				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
-				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
-				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
-				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
-				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
-				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
-				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
-				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
-				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
-				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
-				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
-				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
-				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
-				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
-				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
-				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
-				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
-				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
-			>;
-		};
-
-		pinctrl_ipu_disp2: ipudisp2grp {
-			fsl,pins = <
-				MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
-				MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
-				MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
-				MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
-				MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
-				MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
-				MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
-				MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
-				MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
-				MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
-				MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
-				MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
-				MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
-				MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
-				MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
-				MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
-				MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
-				MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
-				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
-				MX51_PAD_DI_GP4__DI2_PIN15		0x5
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
-				MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
-				MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
-				MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
-				MX51_PAD_KEY_COL0__KEY_COL0		0xe8
-				MX51_PAD_KEY_COL1__KEY_COL1		0xe8
-				MX51_PAD_KEY_COL2__KEY_COL2		0xe8
-				MX51_PAD_KEY_COL3__KEY_COL3		0xe8
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-				MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
-				MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
-				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D25__UART3_RXD		0x1c5
-				MX51_PAD_EIM_D26__UART3_TXD		0x1c5
-				MX51_PAD_EIM_D27__UART3_RTS		0x1c5
-				MX51_PAD_EIM_D24__UART3_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
-				MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
-				MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
-			>;
-		};
-
-		pinctrl_usbh1reg: usbh1reggrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D21__GPIO2_5		0x85
-			>;
-		};
-
-		pinctrl_usbotgreg: usbotgreggrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_7__GPIO1_7		0x85
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
deleted file mode 100644
index 10cae7c3a8791..0000000000000
--- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-#include "imx51-digi-connectcore-som.dtsi"
-
-/ {
-	model = "Digi ConnectCore CC(W)-MX51 JSK";
-	compatible = "digi,connectcore-ccxmx51-jsk",
-		     "digi,connectcore-ccxmx51-som", "fsl,imx51";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	usbphy1: usbphy1 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-		clock-names = "main_clk";
-		#phy-cells = <0>;
-	};
-};
-
-&esdhc1 {
-	status = "okay";
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire>;
-	status = "okay";
-};
-
-&pmic {
-	fsl,mc13xxx-uses-rtc;
-
-	regulators {
-		vcoincell_reg: vcoincell {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	fsl,usbphy = <&usbphy1>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	disable-over-current;
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-digi-connectcore-jsk {
-		pinctrl_owire: owiregrp {
-			fsl,pins = <
-				MX51_PAD_OWIRE_LINE__OWIRE_LINE		0x40000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
-				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x1e5
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x1e5
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x1e5
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x1e5
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x1e5
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x1e5
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x1e5
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x1e5
-				MX51_PAD_USBH1_CLK__USBH1_CLK		0x1e5
-				MX51_PAD_USBH1_DIR__USBH1_DIR		0x1e5
-				MX51_PAD_USBH1_NXT__USBH1_NXT		0x1e5
-				MX51_PAD_USBH1_STP__USBH1_STP		0x1e5
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
deleted file mode 100644
index f0809a16a2cea..0000000000000
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ /dev/null
@@ -1,376 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Digi ConnectCore CC(W)-MX51";
-	compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x08000000>;
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	pmic: mc13892@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mc13892>;
-		compatible = "fsl,mc13892";
-		spi-max-frequency = <16000000>;
-		spi-cs-high;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1275000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1150000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst { };
-
-			viohi_reg: viohi {
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vdig_reg: vdig {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-always-on;
-			};
-
-			vsd_reg: vsd {
-				regulator-min-microvolt = <3150000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-min-microvolt = <2600000>;
-				regulator-max-microvolt = <2600000>;
-				regulator-always-on;
-			};
-
-			vvideo_reg: vvideo {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2750000>;
-				regulator-max-microvolt = <2750000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vusb_reg: vusb {
-				regulator-always-on;
-			};
-
-			gpo2_reg: gpo2 { };
-
-			gpo3_reg: gpo3 { };
-
-			gpo4_reg: gpo4 { };
-
-			pwgt2spi_reg: pwgt2spi {
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	max-frequency = <50000000>;
-	bus-width = <1>;
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cap-sdio-irq;
-	wakeup-source;
-	keep-power-in-suspend;
-	max-frequency = <50000000>;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&gpo4_reg>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-supply = <&gpo3_reg>;
-	/* Pins shared with LCD2, keep status disabled */
-};
-
-&i2c2 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	clock-frequency = <400000>;
-	scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	mma7455l@1d {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mma7455l>;
-		compatible = "fsl,mma7455l";
-		reg = <0x1d>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi_wide";
-	disable-over-current;
-	vbus-supply = <&swbst_reg>;
-	/* Device role is not known, keep status disabled */
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim>;
-	status = "okay";
-
-	lan9221: ethernet@5,0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lan9221>;
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		reg = <5 0x00000000 0x1000>;
-		fsl,weim-cs-timing = <
-			0x00420081 0x00000000
-			0x32260000 0x00000000
-			0x72080f00 0x00000000
-		>;
-		clocks = <&clks IMX5_CLK_DUMMY>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
-		phy-mode = "mii";
-		reg-io-width = <2>;
-		smsc,irq-push-pull;
-		vdd33a-supply = <&gpo2_reg>;
-		vddvario-supply = <&gpo2_reg>;
-	};
-};
-
-&iomuxc {
-	imx51-digi-connectcore-som {
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CLK__SD1_CLK		0x400021d5
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x400020d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_2__I2C2_SCL		0x400001ed
-				MX51_PAD_GPIO1_3__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_i2c2_gpio: i2c2gpiogrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_2__GPIO1_2		0x400001ed
-				MX51_PAD_GPIO1_3__GPIO1_3		0x400001ed
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX51_PAD_NANDF_D0__NANDF_D0		0x80000000
-				MX51_PAD_NANDF_D1__NANDF_D1		0x80000000
-				MX51_PAD_NANDF_D2__NANDF_D2		0x80000000
-				MX51_PAD_NANDF_D3__NANDF_D3		0x80000000
-				MX51_PAD_NANDF_D4__NANDF_D4		0x80000000
-				MX51_PAD_NANDF_D5__NANDF_D5		0x80000000
-				MX51_PAD_NANDF_D6__NANDF_D6		0x80000000
-				MX51_PAD_NANDF_D7__NANDF_D7		0x80000000
-				MX51_PAD_NANDF_ALE__NANDF_ALE		0x80000000
-				MX51_PAD_NANDF_CLE__NANDF_CLE		0x80000000
-				MX51_PAD_NANDF_RE_B__NANDF_RE_B		0x80000000
-				MX51_PAD_NANDF_WE_B__NANDF_WE_B		0x80000000
-				MX51_PAD_NANDF_WP_B__NANDF_WP_B		0x80000000
-				MX51_PAD_NANDF_CS0__NANDF_CS0		0x80000000
-				MX51_PAD_NANDF_RB0__NANDF_RB0		0x80000000
-			>;
-		};
-
-		pinctrl_lan9221: lan9221grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_9__GPIO1_9		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_mc13892: mc13892grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_5__GPIO1_5		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_mma7455l: mma7455lgrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_7__GPIO1_7		0xe5 /* IRQ1 */
-				MX51_PAD_GPIO1_6__GPIO1_6		0xe5 /* IRQ2 */
-			>;
-		};
-
-		pinctrl_weim: weimgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_DA0__EIM_DA0		0x80000000
-				MX51_PAD_EIM_DA1__EIM_DA1		0x80000000
-				MX51_PAD_EIM_DA2__EIM_DA2		0x80000000
-				MX51_PAD_EIM_DA3__EIM_DA3		0x80000000
-				MX51_PAD_EIM_DA4__EIM_DA4		0x80000000
-				MX51_PAD_EIM_DA5__EIM_DA5		0x80000000
-				MX51_PAD_EIM_DA6__EIM_DA6		0x80000000
-				MX51_PAD_EIM_DA7__EIM_DA7		0x80000000
-				MX51_PAD_EIM_DA8__EIM_DA8		0x80000000
-				MX51_PAD_EIM_DA9__EIM_DA9		0x80000000
-				MX51_PAD_EIM_DA10__EIM_DA10		0x80000000
-				MX51_PAD_EIM_DA11__EIM_DA11		0x80000000
-				MX51_PAD_EIM_DA12__EIM_DA12		0x80000000
-				MX51_PAD_EIM_DA13__EIM_DA13		0x80000000
-				MX51_PAD_EIM_DA14__EIM_DA14		0x80000000
-				MX51_PAD_EIM_DA15__EIM_DA15		0x80000000
-				MX51_PAD_EIM_A16__EIM_A16		0x80000000
-				MX51_PAD_EIM_A17__EIM_A17		0x80000000
-				MX51_PAD_EIM_A18__EIM_A18		0x80000000
-				MX51_PAD_EIM_A19__EIM_A19		0x80000000
-				MX51_PAD_EIM_A20__EIM_A20		0x80000000
-				MX51_PAD_EIM_A21__EIM_A21		0x80000000
-				MX51_PAD_EIM_A22__EIM_A22		0x80000000
-				MX51_PAD_EIM_A23__EIM_A23		0x80000000
-				MX51_PAD_EIM_A24__EIM_A24		0x80000000
-				MX51_PAD_EIM_A25__EIM_A25		0x80000000
-				MX51_PAD_EIM_A26__EIM_A26		0x80000000
-				MX51_PAD_EIM_A27__EIM_A27		0x80000000
-				MX51_PAD_EIM_D16__EIM_D16		0x80000000
-				MX51_PAD_EIM_D17__EIM_D17		0x80000000
-				MX51_PAD_EIM_D18__EIM_D18		0x80000000
-				MX51_PAD_EIM_D19__EIM_D19		0x80000000
-				MX51_PAD_EIM_D20__EIM_D20		0x80000000
-				MX51_PAD_EIM_D21__EIM_D21		0x80000000
-				MX51_PAD_EIM_D22__EIM_D22		0x80000000
-				MX51_PAD_EIM_D23__EIM_D23		0x80000000
-				MX51_PAD_EIM_D24__EIM_D24		0x80000000
-				MX51_PAD_EIM_D25__EIM_D25		0x80000000
-				MX51_PAD_EIM_D26__EIM_D26		0x80000000
-				MX51_PAD_EIM_D27__EIM_D27		0x80000000
-				MX51_PAD_EIM_D28__EIM_D28		0x80000000
-				MX51_PAD_EIM_D29__EIM_D29		0x80000000
-				MX51_PAD_EIM_D30__EIM_D30		0x80000000
-				MX51_PAD_EIM_D31__EIM_D31		0x80000000
-				MX51_PAD_EIM_OE__EIM_OE			0x80000000
-				MX51_PAD_EIM_DTACK__EIM_DTACK		0x80000000
-				MX51_PAD_EIM_LBA__EIM_LBA		0x80000000
-				MX51_PAD_EIM_CS5__EIM_CS5		0x80000000 /* CS5 */
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
deleted file mode 100644
index c2a929ba8cebd..0000000000000
--- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx51.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX51";
-	compatible = "eukrea,cpuimx51", "fsl,imx51";
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x10000000>; /* 256M */
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsc2007: tsc2007@49 {
-		compatible = "ti,tsc2007";
-		gpios = <&gpio4 0 1>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <0x0 0x8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007_1>;
-		reg = <0x49>;
-		ti,x-plate-ohms = <180>;
-	};
-};
-
-&iomuxc {
-	imx51-eukrea {
-		pinctrl_tsc2007_1: tsc2007grp-1 {
-			fsl,pins = <
-				MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
-				MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__I2C1_SCL		0x400001ed
-				MX51_PAD_SD2_CLK__I2C1_SDA		0x400001ed
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
deleted file mode 100644
index b6d931e96a8fd..0000000000000
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ /dev/null
@@ -1,274 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-/dts-v1/;
-#include "imx51-eukrea-cpuimx51.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Eukrea CPUIMX51";
-	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
-
-	clocks {
-		clk24M: can_clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys_1>;
-
-		button-1 {
-			label = "BP1";
-			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-			linux,code = <256>;
-			wakeup-source;
-			linux,input-type = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioled>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_can: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "CAN_RST";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <20000>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx51-eukrea-tlv320aic23";
-		ssi-controller = <&ssi2>;
-		fsl,mux-int-port = <2>;
-		fsl,mux-ext-port = <3>;
-	};
-
-	usbphy1: usbphy1 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-		#phy-cells = <0>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	can0: can@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can>;
-		compatible = "microchip,mcp2515";
-		reg = <0>;
-		clocks = <&clk24M>;
-		spi-max-frequency = <10000000>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		vdd-supply = <&reg_can>;
-	};
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx51-eukrea {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
-				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
-				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
-				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
-			>;
-		};
-
-
-		pinctrl_can: cangrp {
-			fsl,pins = <
-				MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x80000000	/* nReset */
-				MX51_PAD_GPIO1_1__GPIO1_1		0x80000000	/* IRQ */
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x80000000 	/* CS0 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3_rtscts: uart3rtsctsgrp {
-			fsl,pins = <
-				MX51_PAD_KEY_COL4__UART3_RTS		0x1c5
-				MX51_PAD_KEY_COL5__UART3_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_backlight_1: backlightgrp-1 {
-			fsl,pins = <
-				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
-			>;
-		};
-
-		pinctrl_esdhc1_cd: esdhc1_cd {
-			fsl,pins = <
-				MX51_PAD_GPIO1_0__GPIO1_0 0xd5
-			>;
-		};
-
-		pinctrl_gpiokeys_1: gpiokeysgrp-1 {
-			fsl,pins = <
-				MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
-			>;
-		};
-
-		pinctrl_gpioled: gpioledgrp-1 {
-			fsl,pins = <
-				MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
-			>;
-		};
-
-		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
-			fsl,pins = <
-				MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_CLK__USBH1_CLK     0x1e5
-				MX51_PAD_USBH1_DIR__USBH1_DIR     0x1e5
-				MX51_PAD_USBH1_NXT__USBH1_NXT     0x1e5
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
-				MX51_PAD_USBH1_STP__USBH1_STP     0x1e5
-			>;
-		};
-
-		pinctrl_usbh1_vbus: usbh1-vbusgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
-			>;
-		};
-	};
-};
-
-&ssi2 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	fsl,usbphy = <&usbphy1>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "otg";
-	phy_type = "utmi_wide";
-	status = "okay";
-};
-
-&usbphy0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1_vbus>;
-	reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/imx51-pinfunc.h b/arch/arm/boot/dts/imx51-pinfunc.h
deleted file mode 100644
index 910e0ec50ef3e..0000000000000
--- a/arch/arm/boot/dts/imx51-pinfunc.h
+++ /dev/null
@@ -1,768 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DTS_IMX51_PINFUNC_H
-#define __DTS_IMX51_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX51_PAD_EIM_D16__AUD4_RXFS			0x05c 0x3f0 0x000 0x5 0x0
-#define MX51_PAD_EIM_D16__AUD5_TXD			0x05c 0x3f0 0x8d8 0x7 0x0
-#define MX51_PAD_EIM_D16__EIM_D16			0x05c 0x3f0 0x000 0x0 0x0
-#define MX51_PAD_EIM_D16__GPIO2_0			0x05c 0x3f0 0x000 0x1 0x0
-#define MX51_PAD_EIM_D16__I2C1_SDA			0x05c 0x3f0 0x9b4 0x4 0x0
-#define MX51_PAD_EIM_D16__UART2_CTS			0x05c 0x3f0 0x000 0x3 0x0
-#define MX51_PAD_EIM_D16__USBH2_DATA0			0x05c 0x3f0 0x000 0x2 0x0
-#define MX51_PAD_EIM_D17__AUD5_RXD			0x060 0x3f4 0x8d4 0x7 0x0
-#define MX51_PAD_EIM_D17__EIM_D17			0x060 0x3f4 0x000 0x0 0x0
-#define MX51_PAD_EIM_D17__GPIO2_1			0x060 0x3f4 0x000 0x1 0x0
-#define MX51_PAD_EIM_D17__UART2_RXD			0x060 0x3f4 0x9ec 0x3 0x0
-#define MX51_PAD_EIM_D17__UART3_CTS			0x060 0x3f4 0x000 0x4 0x0
-#define MX51_PAD_EIM_D17__USBH2_DATA1			0x060 0x3f4 0x000 0x2 0x0
-#define MX51_PAD_EIM_D18__AUD5_TXC			0x064 0x3f8 0x8e4 0x7 0x0
-#define MX51_PAD_EIM_D18__EIM_D18			0x064 0x3f8 0x000 0x0 0x0
-#define MX51_PAD_EIM_D18__GPIO2_2			0x064 0x3f8 0x000 0x1 0x0
-#define MX51_PAD_EIM_D18__UART2_TXD			0x064 0x3f8 0x000 0x3 0x0
-#define MX51_PAD_EIM_D18__UART3_RTS			0x064 0x3f8 0x9f0 0x4 0x1
-#define MX51_PAD_EIM_D18__USBH2_DATA2			0x064 0x3f8 0x000 0x2 0x0
-#define MX51_PAD_EIM_D19__AUD4_RXC			0x068 0x3fc 0x000 0x5 0x0
-#define MX51_PAD_EIM_D19__AUD5_TXFS			0x068 0x3fc 0x8e8 0x7 0x0
-#define MX51_PAD_EIM_D19__EIM_D19			0x068 0x3fc 0x000 0x0 0x0
-#define MX51_PAD_EIM_D19__GPIO2_3			0x068 0x3fc 0x000 0x1 0x0
-#define MX51_PAD_EIM_D19__I2C1_SCL			0x068 0x3fc 0x9b0 0x4 0x0
-#define MX51_PAD_EIM_D19__UART2_RTS			0x068 0x3fc 0x9e8 0x3 0x1
-#define MX51_PAD_EIM_D19__USBH2_DATA3			0x068 0x3fc 0x000 0x2 0x0
-#define MX51_PAD_EIM_D20__AUD4_TXD			0x06c 0x400 0x8c8 0x5 0x0
-#define MX51_PAD_EIM_D20__EIM_D20			0x06c 0x400 0x000 0x0 0x0
-#define MX51_PAD_EIM_D20__GPIO2_4			0x06c 0x400 0x000 0x1 0x0
-#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB		0x06c 0x400 0x000 0x4 0x0
-#define MX51_PAD_EIM_D20__USBH2_DATA4			0x06c 0x400 0x000 0x2 0x0
-#define MX51_PAD_EIM_D21__AUD4_RXD			0x070 0x404 0x8c4 0x5 0x0
-#define MX51_PAD_EIM_D21__EIM_D21			0x070 0x404 0x000 0x0 0x0
-#define MX51_PAD_EIM_D21__GPIO2_5			0x070 0x404 0x000 0x1 0x0
-#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB		0x070 0x404 0x000 0x3 0x0
-#define MX51_PAD_EIM_D21__USBH2_DATA5			0x070 0x404 0x000 0x2 0x0
-#define MX51_PAD_EIM_D22__AUD4_TXC			0x074 0x408 0x8cc 0x5 0x0
-#define MX51_PAD_EIM_D22__EIM_D22			0x074 0x408 0x000 0x0 0x0
-#define MX51_PAD_EIM_D22__GPIO2_6			0x074 0x408 0x000 0x1 0x0
-#define MX51_PAD_EIM_D22__USBH2_DATA6			0x074 0x408 0x000 0x2 0x0
-#define MX51_PAD_EIM_D23__AUD4_TXFS			0x078 0x40c 0x8d0 0x5 0x0
-#define MX51_PAD_EIM_D23__EIM_D23			0x078 0x40c 0x000 0x0 0x0
-#define MX51_PAD_EIM_D23__GPIO2_7			0x078 0x40c 0x000 0x1 0x0
-#define MX51_PAD_EIM_D23__SPDIF_OUT1			0x078 0x40c 0x000 0x4 0x0
-#define MX51_PAD_EIM_D23__USBH2_DATA7			0x078 0x40c 0x000 0x2 0x0
-#define MX51_PAD_EIM_D24__AUD6_RXFS			0x07c 0x410 0x8f8 0x5 0x0
-#define MX51_PAD_EIM_D24__EIM_D24			0x07c 0x410 0x000 0x0 0x0
-#define MX51_PAD_EIM_D24__GPIO2_8			0x07c 0x410 0x000 0x1 0x0
-#define MX51_PAD_EIM_D24__I2C2_SDA			0x07c 0x410 0x9bc 0x4 0x0
-#define MX51_PAD_EIM_D24__UART3_CTS			0x07c 0x410 0x000 0x3 0x0
-#define MX51_PAD_EIM_D24__USBOTG_DATA0			0x07c 0x410 0x000 0x2 0x0
-#define MX51_PAD_EIM_D25__EIM_D25			0x080 0x414 0x000 0x0 0x0
-#define MX51_PAD_EIM_D25__KEY_COL6			0x080 0x414 0x9c8 0x1 0x0
-#define MX51_PAD_EIM_D25__UART2_CTS			0x080 0x414 0x000 0x4 0x0
-#define MX51_PAD_EIM_D25__UART3_RXD			0x080 0x414 0x9f4 0x3 0x0
-#define MX51_PAD_EIM_D25__USBOTG_DATA1			0x080 0x414 0x000 0x2 0x0
-#define MX51_PAD_EIM_D26__EIM_D26			0x084 0x418 0x000 0x0 0x0
-#define MX51_PAD_EIM_D26__KEY_COL7			0x084 0x418 0x9cc 0x1 0x0
-#define MX51_PAD_EIM_D26__UART2_RTS			0x084 0x418 0x9e8 0x4 0x3
-#define MX51_PAD_EIM_D26__UART3_TXD			0x084 0x418 0x000 0x3 0x0
-#define MX51_PAD_EIM_D26__USBOTG_DATA2			0x084 0x418 0x000 0x2 0x0
-#define MX51_PAD_EIM_D27__AUD6_RXC			0x088 0x41c 0x8f4 0x5 0x0
-#define MX51_PAD_EIM_D27__EIM_D27			0x088 0x41c 0x000 0x0 0x0
-#define MX51_PAD_EIM_D27__GPIO2_9			0x088 0x41c 0x000 0x1 0x0
-#define MX51_PAD_EIM_D27__I2C2_SCL			0x088 0x41c 0x9b8 0x4 0x0
-#define MX51_PAD_EIM_D27__UART3_RTS			0x088 0x41c 0x9f0 0x3 0x3
-#define MX51_PAD_EIM_D27__USBOTG_DATA3			0x088 0x41c 0x000 0x2 0x0
-#define MX51_PAD_EIM_D28__AUD6_TXD			0x08c 0x420 0x8f0 0x5 0x0
-#define MX51_PAD_EIM_D28__EIM_D28			0x08c 0x420 0x000 0x0 0x0
-#define MX51_PAD_EIM_D28__KEY_ROW4			0x08c 0x420 0x9d0 0x1 0x0
-#define MX51_PAD_EIM_D28__USBOTG_DATA4			0x08c 0x420 0x000 0x2 0x0
-#define MX51_PAD_EIM_D29__AUD6_RXD			0x090 0x424 0x8ec 0x5 0x0
-#define MX51_PAD_EIM_D29__EIM_D29			0x090 0x424 0x000 0x0 0x0
-#define MX51_PAD_EIM_D29__KEY_ROW5			0x090 0x424 0x9d4 0x1 0x0
-#define MX51_PAD_EIM_D29__USBOTG_DATA5			0x090 0x424 0x000 0x2 0x0
-#define MX51_PAD_EIM_D30__AUD6_TXC			0x094 0x428 0x8fc 0x5 0x0
-#define MX51_PAD_EIM_D30__EIM_D30			0x094 0x428 0x000 0x0 0x0
-#define MX51_PAD_EIM_D30__KEY_ROW6			0x094 0x428 0x9d8 0x1 0x0
-#define MX51_PAD_EIM_D30__USBOTG_DATA6			0x094 0x428 0x000 0x2 0x0
-#define MX51_PAD_EIM_D31__AUD6_TXFS			0x098 0x42c 0x900 0x5 0x0
-#define MX51_PAD_EIM_D31__EIM_D31			0x098 0x42c 0x000 0x0 0x0
-#define MX51_PAD_EIM_D31__KEY_ROW7			0x098 0x42c 0x9dc 0x1 0x0
-#define MX51_PAD_EIM_D31__USBOTG_DATA7			0x098 0x42c 0x000 0x2 0x0
-#define MX51_PAD_EIM_A16__EIM_A16			0x09c 0x430 0x000 0x0 0x0
-#define MX51_PAD_EIM_A16__GPIO2_10			0x09c 0x430 0x000 0x1 0x0
-#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0			0x09c 0x430 0x000 0x7 0x0
-#define MX51_PAD_EIM_A17__EIM_A17			0x0a0 0x434 0x000 0x0 0x0
-#define MX51_PAD_EIM_A17__GPIO2_11			0x0a0 0x434 0x000 0x1 0x0
-#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1			0x0a0 0x434 0x000 0x7 0x0
-#define MX51_PAD_EIM_A18__BOOT_LPB0			0x0a4 0x438 0x000 0x7 0x0
-#define MX51_PAD_EIM_A18__EIM_A18			0x0a4 0x438 0x000 0x0 0x0
-#define MX51_PAD_EIM_A18__GPIO2_12			0x0a4 0x438 0x000 0x1 0x0
-#define MX51_PAD_EIM_A19__BOOT_LPB1			0x0a8 0x43c 0x000 0x7 0x0
-#define MX51_PAD_EIM_A19__EIM_A19			0x0a8 0x43c 0x000 0x0 0x0
-#define MX51_PAD_EIM_A19__GPIO2_13			0x0a8 0x43c 0x000 0x1 0x0
-#define MX51_PAD_EIM_A20__BOOT_UART_SRC0		0x0ac 0x440 0x000 0x7 0x0
-#define MX51_PAD_EIM_A20__EIM_A20			0x0ac 0x440 0x000 0x0 0x0
-#define MX51_PAD_EIM_A20__GPIO2_14			0x0ac 0x440 0x000 0x1 0x0
-#define MX51_PAD_EIM_A21__BOOT_UART_SRC1		0x0b0 0x444 0x000 0x7 0x0
-#define MX51_PAD_EIM_A21__EIM_A21			0x0b0 0x444 0x000 0x0 0x0
-#define MX51_PAD_EIM_A21__GPIO2_15			0x0b0 0x444 0x000 0x1 0x0
-#define MX51_PAD_EIM_A22__EIM_A22			0x0b4 0x448 0x000 0x0 0x0
-#define MX51_PAD_EIM_A22__GPIO2_16			0x0b4 0x448 0x000 0x1 0x0
-#define MX51_PAD_EIM_A23__BOOT_HPN_EN			0x0b8 0x44c 0x000 0x7 0x0
-#define MX51_PAD_EIM_A23__EIM_A23			0x0b8 0x44c 0x000 0x0 0x0
-#define MX51_PAD_EIM_A23__GPIO2_17			0x0b8 0x44c 0x000 0x1 0x0
-#define MX51_PAD_EIM_A24__EIM_A24			0x0bc 0x450 0x000 0x0 0x0
-#define MX51_PAD_EIM_A24__GPIO2_18			0x0bc 0x450 0x000 0x1 0x0
-#define MX51_PAD_EIM_A24__USBH2_CLK			0x0bc 0x450 0x000 0x2 0x0
-#define MX51_PAD_EIM_A25__DISP1_PIN4			0x0c0 0x454 0x000 0x6 0x0
-#define MX51_PAD_EIM_A25__EIM_A25			0x0c0 0x454 0x000 0x0 0x0
-#define MX51_PAD_EIM_A25__GPIO2_19			0x0c0 0x454 0x000 0x1 0x0
-#define MX51_PAD_EIM_A25__USBH2_DIR			0x0c0 0x454 0x000 0x2 0x0
-#define MX51_PAD_EIM_A26__CSI1_DATA_EN			0x0c4 0x458 0x9a0 0x5 0x0
-#define MX51_PAD_EIM_A26__DISP2_EXT_CLK			0x0c4 0x458 0x908 0x6 0x0
-#define MX51_PAD_EIM_A26__EIM_A26			0x0c4 0x458 0x000 0x0 0x0
-#define MX51_PAD_EIM_A26__GPIO2_20			0x0c4 0x458 0x000 0x1 0x0
-#define MX51_PAD_EIM_A26__USBH2_STP			0x0c4 0x458 0x000 0x2 0x0
-#define MX51_PAD_EIM_A27__CSI2_DATA_EN			0x0c8 0x45c 0x99c 0x5 0x0
-#define MX51_PAD_EIM_A27__DISP1_PIN1			0x0c8 0x45c 0x9a4 0x6 0x0
-#define MX51_PAD_EIM_A27__EIM_A27			0x0c8 0x45c 0x000 0x0 0x0
-#define MX51_PAD_EIM_A27__GPIO2_21			0x0c8 0x45c 0x000 0x1 0x0
-#define MX51_PAD_EIM_A27__USBH2_NXT			0x0c8 0x45c 0x000 0x2 0x0
-#define MX51_PAD_EIM_EB0__EIM_EB0			0x0cc 0x460 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB1__EIM_EB1			0x0d0 0x464 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB2__AUD5_RXFS			0x0d4 0x468 0x8e0 0x6 0x0
-#define MX51_PAD_EIM_EB2__CSI1_D2			0x0d4 0x468 0x000 0x5 0x0
-#define MX51_PAD_EIM_EB2__EIM_EB2			0x0d4 0x468 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB2__FEC_MDIO			0x0d4 0x468 0x954 0x3 0x0
-#define MX51_PAD_EIM_EB2__GPIO2_22			0x0d4 0x468 0x000 0x1 0x0
-#define MX51_PAD_EIM_EB2__GPT_CMPOUT1			0x0d4 0x468 0x000 0x7 0x0
-#define MX51_PAD_EIM_EB3__AUD5_RXC			0x0d8 0x46c 0x8dc 0x6 0x0
-#define MX51_PAD_EIM_EB3__CSI1_D3			0x0d8 0x46c 0x000 0x5 0x0
-#define MX51_PAD_EIM_EB3__EIM_EB3			0x0d8 0x46c 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB3__FEC_RDATA1			0x0d8 0x46c 0x95c 0x3 0x0
-#define MX51_PAD_EIM_EB3__GPIO2_23			0x0d8 0x46c 0x000 0x1 0x0
-#define MX51_PAD_EIM_EB3__GPT_CMPOUT2			0x0d8 0x46c 0x000 0x7 0x0
-#define MX51_PAD_EIM_OE__EIM_OE				0x0dc 0x470 0x000 0x0 0x0
-#define MX51_PAD_EIM_OE__GPIO2_24			0x0dc 0x470 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS0__EIM_CS0			0x0e0 0x474 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS0__GPIO2_25			0x0e0 0x474 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS1__EIM_CS1			0x0e4 0x478 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS1__GPIO2_26			0x0e4 0x478 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS2__AUD5_TXD			0x0e8 0x47c 0x8d8 0x6 0x1
-#define MX51_PAD_EIM_CS2__CSI1_D4			0x0e8 0x47c 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS2__EIM_CS2			0x0e8 0x47c 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS2__FEC_RDATA2			0x0e8 0x47c 0x960 0x3 0x0
-#define MX51_PAD_EIM_CS2__GPIO2_27			0x0e8 0x47c 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS2__USBOTG_STP			0x0e8 0x47c 0x000 0x2 0x0
-#define MX51_PAD_EIM_CS3__AUD5_RXD			0x0ec 0x480 0x8d4 0x6 0x1
-#define MX51_PAD_EIM_CS3__CSI1_D5			0x0ec 0x480 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS3__EIM_CS3			0x0ec 0x480 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS3__FEC_RDATA3			0x0ec 0x480 0x964 0x3 0x0
-#define MX51_PAD_EIM_CS3__GPIO2_28			0x0ec 0x480 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS3__USBOTG_NXT			0x0ec 0x480 0x000 0x2 0x0
-#define MX51_PAD_EIM_CS4__AUD5_TXC			0x0f0 0x484 0x8e4 0x6 0x1
-#define MX51_PAD_EIM_CS4__CSI1_D6			0x0f0 0x484 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS4__EIM_CS4			0x0f0 0x484 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS4__FEC_RX_ER			0x0f0 0x484 0x970 0x3 0x0
-#define MX51_PAD_EIM_CS4__GPIO2_29			0x0f0 0x484 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS4__USBOTG_CLK			0x0f0 0x484 0x000 0x2 0x0
-#define MX51_PAD_EIM_CS5__AUD5_TXFS			0x0f4 0x488 0x8e8 0x6 0x1
-#define MX51_PAD_EIM_CS5__CSI1_D7			0x0f4 0x488 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK			0x0f4 0x488 0x904 0x4 0x0
-#define MX51_PAD_EIM_CS5__EIM_CS5			0x0f4 0x488 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS5__FEC_CRS			0x0f4 0x488 0x950 0x3 0x0
-#define MX51_PAD_EIM_CS5__GPIO2_30			0x0f4 0x488 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS5__USBOTG_DIR			0x0f4 0x488 0x000 0x2 0x0
-#define MX51_PAD_EIM_DTACK__EIM_DTACK			0x0f8 0x48c 0x000 0x0 0x0
-#define MX51_PAD_EIM_DTACK__GPIO2_31			0x0f8 0x48c 0x000 0x1 0x0
-#define MX51_PAD_EIM_LBA__EIM_LBA			0x0fc 0x494 0x000 0x0 0x0
-#define MX51_PAD_EIM_LBA__GPIO3_1			0x0fc 0x494 0x978 0x1 0x0
-#define MX51_PAD_EIM_CRE__EIM_CRE			0x100 0x4a0 0x000 0x0 0x0
-#define MX51_PAD_EIM_CRE__GPIO3_2			0x100 0x4a0 0x97c 0x1 0x0
-#define MX51_PAD_DRAM_CS1__DRAM_CS1			0x104 0x4d0 0x000 0x0 0x0
-#define MX51_PAD_NANDF_WE_B__GPIO3_3			0x108 0x4e4 0x980 0x3 0x0
-#define MX51_PAD_NANDF_WE_B__NANDF_WE_B			0x108 0x4e4 0x000 0x0 0x0
-#define MX51_PAD_NANDF_WE_B__PATA_DIOW			0x108 0x4e4 0x000 0x1 0x0
-#define MX51_PAD_NANDF_WE_B__SD3_DATA0			0x108 0x4e4 0x93c 0x2 0x0
-#define MX51_PAD_NANDF_RE_B__GPIO3_4			0x10c 0x4e8 0x984 0x3 0x0
-#define MX51_PAD_NANDF_RE_B__NANDF_RE_B			0x10c 0x4e8 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RE_B__PATA_DIOR			0x10c 0x4e8 0x000 0x1 0x0
-#define MX51_PAD_NANDF_RE_B__SD3_DATA1			0x10c 0x4e8 0x940 0x2 0x0
-#define MX51_PAD_NANDF_ALE__GPIO3_5			0x110 0x4ec 0x988 0x3 0x0
-#define MX51_PAD_NANDF_ALE__NANDF_ALE			0x110 0x4ec 0x000 0x0 0x0
-#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN		0x110 0x4ec 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CLE__GPIO3_6			0x114 0x4f0 0x98c 0x3 0x0
-#define MX51_PAD_NANDF_CLE__NANDF_CLE			0x114 0x4f0 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CLE__PATA_RESET_B		0x114 0x4f0 0x000 0x1 0x0
-#define MX51_PAD_NANDF_WP_B__GPIO3_7			0x118 0x4f4 0x990 0x3 0x0
-#define MX51_PAD_NANDF_WP_B__NANDF_WP_B			0x118 0x4f4 0x000 0x0 0x0
-#define MX51_PAD_NANDF_WP_B__PATA_DMACK			0x118 0x4f4 0x000 0x1 0x0
-#define MX51_PAD_NANDF_WP_B__SD3_DATA2			0x118 0x4f4 0x944 0x2 0x0
-#define MX51_PAD_NANDF_RB0__ECSPI2_SS1			0x11c 0x4f8 0x930 0x5 0x0
-#define MX51_PAD_NANDF_RB0__GPIO3_8			0x11c 0x4f8 0x994 0x3 0x0
-#define MX51_PAD_NANDF_RB0__NANDF_RB0			0x11c 0x4f8 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB0__PATA_DMARQ			0x11c 0x4f8 0x000 0x1 0x0
-#define MX51_PAD_NANDF_RB0__SD3_DATA3			0x11c 0x4f8 0x948 0x2 0x0
-#define MX51_PAD_NANDF_RB1__CSPI_MOSI			0x120 0x4fc 0x91c 0x6 0x0
-#define MX51_PAD_NANDF_RB1__ECSPI2_RDY			0x120 0x4fc 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RB1__GPIO3_9			0x120 0x4fc 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RB1__NANDF_RB1			0x120 0x4fc 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB1__PATA_IORDY			0x120 0x4fc 0x000 0x1 0x0
-#define MX51_PAD_NANDF_RB1__SD4_CMD			0x120 0x4fc 0x000 0x5 0x0
-#define MX51_PAD_NANDF_RB2__DISP2_WAIT			0x124 0x500 0x9a8 0x5 0x0
-#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK			0x124 0x500 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RB2__FEC_COL			0x124 0x500 0x94c 0x1 0x0
-#define MX51_PAD_NANDF_RB2__GPIO3_10			0x124 0x500 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RB2__NANDF_RB2			0x124 0x500 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB2__USBH3_H3_DP			0x124 0x500 0x000 0x7 0x0
-#define MX51_PAD_NANDF_RB2__USBH3_NXT			0x124 0x500 0xa20 0x6 0x0
-#define MX51_PAD_NANDF_RB3__DISP1_WAIT			0x128 0x504 0x000 0x5 0x0
-#define MX51_PAD_NANDF_RB3__ECSPI2_MISO			0x128 0x504 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RB3__FEC_RX_CLK			0x128 0x504 0x968 0x1 0x0
-#define MX51_PAD_NANDF_RB3__GPIO3_11			0x128 0x504 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RB3__NANDF_RB3			0x128 0x504 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB3__USBH3_CLK			0x128 0x504 0x9f8 0x6 0x0
-#define MX51_PAD_NANDF_RB3__USBH3_H3_DM			0x128 0x504 0x000 0x7 0x0
-#define MX51_PAD_GPIO_NAND__GPIO_NAND			0x12c 0x514 0x998 0x0 0x0
-#define MX51_PAD_GPIO_NAND__PATA_INTRQ			0x12c 0x514 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS0__GPIO3_16			0x130 0x518 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS0__NANDF_CS0			0x130 0x518 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS1__GPIO3_17			0x134 0x51c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS1__NANDF_CS1			0x134 0x51c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS2__CSPI_SCLK			0x138 0x520 0x914 0x6 0x0
-#define MX51_PAD_NANDF_CS2__FEC_TX_ER			0x138 0x520 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS2__GPIO3_18			0x138 0x520 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS2__NANDF_CS2			0x138 0x520 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS2__PATA_CS_0			0x138 0x520 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS2__SD4_CLK			0x138 0x520 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS2__USBH3_H1_DP			0x138 0x520 0x000 0x7 0x0
-#define MX51_PAD_NANDF_CS3__FEC_MDC			0x13c 0x524 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS3__GPIO3_19			0x13c 0x524 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS3__NANDF_CS3			0x13c 0x524 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS3__PATA_CS_1			0x13c 0x524 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS3__SD4_DAT0			0x13c 0x524 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS3__USBH3_H1_DM			0x13c 0x524 0x000 0x7 0x0
-#define MX51_PAD_NANDF_CS4__FEC_TDATA1			0x140 0x528 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS4__GPIO3_20			0x140 0x528 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS4__NANDF_CS4			0x140 0x528 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS4__PATA_DA_0			0x140 0x528 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS4__SD4_DAT1			0x140 0x528 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS4__USBH3_STP			0x140 0x528 0xa24 0x7 0x0
-#define MX51_PAD_NANDF_CS5__FEC_TDATA2			0x144 0x52c 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS5__GPIO3_21			0x144 0x52c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS5__NANDF_CS5			0x144 0x52c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS5__PATA_DA_1			0x144 0x52c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS5__SD4_DAT2			0x144 0x52c 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS5__USBH3_DIR			0x144 0x52c 0xa1c 0x7 0x0
-#define MX51_PAD_NANDF_CS6__CSPI_SS3			0x148 0x530 0x928 0x7 0x0
-#define MX51_PAD_NANDF_CS6__FEC_TDATA3			0x148 0x530 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS6__GPIO3_22			0x148 0x530 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS6__NANDF_CS6			0x148 0x530 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS6__PATA_DA_2			0x148 0x530 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS6__SD4_DAT3			0x148 0x530 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS7__FEC_TX_EN			0x14c 0x534 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS7__GPIO3_23			0x14c 0x534 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS7__NANDF_CS7			0x14c 0x534 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS7__SD3_CLK			0x14c 0x534 0x000 0x5 0x0
-#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0		0x150 0x538 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK		0x150 0x538 0x974 0x1 0x0
-#define MX51_PAD_NANDF_RDY_INT__GPIO3_24		0x150 0x538 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT		0x150 0x538 0x938 0x0 0x0
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD			0x150 0x538 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D15__ECSPI2_MOSI			0x154 0x53c 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D15__GPIO3_25			0x154 0x53c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D15__NANDF_D15			0x154 0x53c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D15__PATA_DATA15			0x154 0x53c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D15__SD3_DAT7			0x154 0x53c 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D14__ECSPI2_SS3			0x158 0x540 0x934 0x2 0x0
-#define MX51_PAD_NANDF_D14__GPIO3_26			0x158 0x540 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D14__NANDF_D14			0x158 0x540 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D14__PATA_DATA14			0x158 0x540 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D14__SD3_DAT6			0x158 0x540 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D13__ECSPI2_SS2			0x15c 0x544 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D13__GPIO3_27			0x15c 0x544 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D13__NANDF_D13			0x15c 0x544 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D13__PATA_DATA13			0x15c 0x544 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D13__SD3_DAT5			0x15c 0x544 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D12__ECSPI2_SS1			0x160 0x548 0x930 0x2 0x1
-#define MX51_PAD_NANDF_D12__GPIO3_28			0x160 0x548 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D12__NANDF_D12			0x160 0x548 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D12__PATA_DATA12			0x160 0x548 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D12__SD3_DAT4			0x160 0x548 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D11__FEC_RX_DV			0x164 0x54c 0x96c 0x2 0x0
-#define MX51_PAD_NANDF_D11__GPIO3_29			0x164 0x54c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D11__NANDF_D11			0x164 0x54c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D11__PATA_DATA11			0x164 0x54c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D11__SD3_DATA3			0x164 0x54c 0x948 0x5 0x1
-#define MX51_PAD_NANDF_D10__GPIO3_30			0x168 0x550 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D10__NANDF_D10			0x168 0x550 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D10__PATA_DATA10			0x168 0x550 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D10__SD3_DATA2			0x168 0x550 0x944 0x5 0x1
-#define MX51_PAD_NANDF_D9__FEC_RDATA0			0x16c 0x554 0x958 0x2 0x0
-#define MX51_PAD_NANDF_D9__GPIO3_31			0x16c 0x554 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D9__NANDF_D9			0x16c 0x554 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D9__PATA_DATA9			0x16c 0x554 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D9__SD3_DATA1			0x16c 0x554 0x940 0x5 0x1
-#define MX51_PAD_NANDF_D8__FEC_TDATA0			0x170 0x558 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D8__GPIO4_0			0x170 0x558 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D8__NANDF_D8			0x170 0x558 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D8__PATA_DATA8			0x170 0x558 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D8__SD3_DATA0			0x170 0x558 0x93c 0x5 0x1
-#define MX51_PAD_NANDF_D7__GPIO4_1			0x174 0x55c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D7__NANDF_D7			0x174 0x55c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D7__PATA_DATA7			0x174 0x55c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D7__USBH3_DATA0			0x174 0x55c 0x9fc 0x5 0x0
-#define MX51_PAD_NANDF_D6__GPIO4_2			0x178 0x560 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D6__NANDF_D6			0x178 0x560 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D6__PATA_DATA6			0x178 0x560 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D6__SD4_LCTL			0x178 0x560 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D6__USBH3_DATA1			0x178 0x560 0xa00 0x5 0x0
-#define MX51_PAD_NANDF_D5__GPIO4_3			0x17c 0x564 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D5__NANDF_D5			0x17c 0x564 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D5__PATA_DATA5			0x17c 0x564 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D5__SD4_WP			0x17c 0x564 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D5__USBH3_DATA2			0x17c 0x564 0xa04 0x5 0x0
-#define MX51_PAD_NANDF_D4__GPIO4_4			0x180 0x568 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D4__NANDF_D4			0x180 0x568 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D4__PATA_DATA4			0x180 0x568 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D4__SD4_CD			0x180 0x568 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D4__USBH3_DATA3			0x180 0x568 0xa08 0x5 0x0
-#define MX51_PAD_NANDF_D3__GPIO4_5			0x184 0x56c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D3__NANDF_D3			0x184 0x56c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D3__PATA_DATA3			0x184 0x56c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D3__SD4_DAT4			0x184 0x56c 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D3__USBH3_DATA4			0x184 0x56c 0xa0c 0x5 0x0
-#define MX51_PAD_NANDF_D2__GPIO4_6			0x188 0x570 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D2__NANDF_D2			0x188 0x570 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D2__PATA_DATA2			0x188 0x570 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D2__SD4_DAT5			0x188 0x570 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D2__USBH3_DATA5			0x188 0x570 0xa10 0x5 0x0
-#define MX51_PAD_NANDF_D1__GPIO4_7			0x18c 0x574 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D1__NANDF_D1			0x18c 0x574 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D1__PATA_DATA1			0x18c 0x574 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D1__SD4_DAT6			0x18c 0x574 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D1__USBH3_DATA6			0x18c 0x574 0xa14 0x5 0x0
-#define MX51_PAD_NANDF_D0__GPIO4_8			0x190 0x578 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D0__NANDF_D0			0x190 0x578 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D0__PATA_DATA0			0x190 0x578 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D0__SD4_DAT7			0x190 0x578 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D0__USBH3_DATA7			0x190 0x578 0xa18 0x5 0x0
-#define MX51_PAD_CSI1_D8__CSI1_D8			0x194 0x57c 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D8__GPIO3_12			0x194 0x57c 0x998 0x3 0x1
-#define MX51_PAD_CSI1_D9__CSI1_D9			0x198 0x580 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D9__GPIO3_13			0x198 0x580 0x000 0x3 0x0
-#define MX51_PAD_CSI1_D10__CSI1_D10			0x19c 0x584 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D11__CSI1_D11			0x1a0 0x588 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D12__CSI1_D12			0x1a4 0x58c 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D13__CSI1_D13			0x1a8 0x590 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D14__CSI1_D14			0x1ac 0x594 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D15__CSI1_D15			0x1b0 0x598 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D16__CSI1_D16			0x1b4 0x59c 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D17__CSI1_D17			0x1b8 0x5a0 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D18__CSI1_D18			0x1bc 0x5a4 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D19__CSI1_D19			0x1c0 0x5a8 0x000 0x0 0x0
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC			0x1c4 0x5ac 0x000 0x0 0x0
-#define MX51_PAD_CSI1_VSYNC__GPIO3_14			0x1c4 0x5ac 0x000 0x3 0x0
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC			0x1c8 0x5b0 0x000 0x0 0x0
-#define MX51_PAD_CSI1_HSYNC__GPIO3_15			0x1c8 0x5b0 0x000 0x3 0x0
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK		0x000 0x5b4 0x000 0x0 0x0
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK			0x000 0x5b8 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D12__CSI2_D12			0x1cc 0x5bc 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D12__GPIO4_9			0x1cc 0x5bc 0x000 0x3 0x0
-#define MX51_PAD_CSI2_D13__CSI2_D13			0x1d0 0x5c0 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D13__GPIO4_10			0x1d0 0x5c0 0x000 0x3 0x0
-#define MX51_PAD_CSI2_D14__CSI2_D14			0x1d4 0x5c4 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D15__CSI2_D15			0x1d8 0x5c8 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D16__CSI2_D16			0x1dc 0x5cc 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D17__CSI2_D17			0x1e0 0x5d0 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D18__CSI2_D18			0x1e4 0x5d4 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D18__GPIO4_11			0x1e4 0x5d4 0x000 0x3 0x0
-#define MX51_PAD_CSI2_D19__CSI2_D19			0x1e8 0x5d8 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D19__GPIO4_12			0x1e8 0x5d8 0x000 0x3 0x0
-#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC			0x1ec 0x5dc 0x000 0x0 0x0
-#define MX51_PAD_CSI2_VSYNC__GPIO4_13			0x1ec 0x5dc 0x000 0x3 0x0
-#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC			0x1f0 0x5e0 0x000 0x0 0x0
-#define MX51_PAD_CSI2_HSYNC__GPIO4_14			0x1f0 0x5e0 0x000 0x3 0x0
-#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK		0x1f4 0x5e4 0x000 0x0 0x0
-#define MX51_PAD_CSI2_PIXCLK__GPIO4_15			0x1f4 0x5e4 0x000 0x3 0x0
-#define MX51_PAD_I2C1_CLK__GPIO4_16			0x1f8 0x5e8 0x000 0x3 0x0
-#define MX51_PAD_I2C1_CLK__I2C1_CLK			0x1f8 0x5e8 0x000 0x0 0x0
-#define MX51_PAD_I2C1_DAT__GPIO4_17			0x1fc 0x5ec 0x000 0x3 0x0
-#define MX51_PAD_I2C1_DAT__I2C1_DAT			0x1fc 0x5ec 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD			0x200 0x5f0 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_TXD__GPIO4_18			0x200 0x5f0 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD			0x204 0x5f4 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_RXD__GPIO4_19			0x204 0x5f4 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_RXD__UART3_RXD			0x204 0x5f4 0x9f4 0x1 0x2
-#define MX51_PAD_AUD3_BB_CK__AUD3_TXC			0x208 0x5f8 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_CK__GPIO4_20			0x208 0x5f8 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS			0x20c 0x5fc 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_FS__GPIO4_21			0x20c 0x5fc 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_FS__UART3_TXD			0x20c 0x5fc 0x000 0x1 0x0
-#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI		0x210 0x600 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_MOSI__GPIO4_22			0x210 0x600 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_MOSI__I2C1_SDA			0x210 0x600 0x9b4 0x1 0x1
-#define MX51_PAD_CSPI1_MISO__AUD4_RXD			0x214 0x604 0x8c4 0x1 0x1
-#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO		0x214 0x604 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_MISO__GPIO4_23			0x214 0x604 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SS0__AUD4_TXC			0x218 0x608 0x8cc 0x1 0x1
-#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0			0x218 0x608 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_SS0__GPIO4_24			0x218 0x608 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SS1__AUD4_TXD			0x21c 0x60c 0x8c8 0x1 0x1
-#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1			0x21c 0x60c 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_SS1__GPIO4_25			0x21c 0x60c 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_RDY__AUD4_TXFS			0x220 0x610 0x8d0 0x1 0x1
-#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY			0x220 0x610 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_RDY__GPIO4_26			0x220 0x610 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK		0x224 0x614 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_SCLK__GPIO4_27			0x224 0x614 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SCLK__I2C1_SCL			0x224 0x614 0x9b0 0x1 0x1
-#define MX51_PAD_UART1_RXD__GPIO4_28			0x228 0x618 0x000 0x3 0x0
-#define MX51_PAD_UART1_RXD__UART1_RXD			0x228 0x618 0x9e4 0x0 0x0
-#define MX51_PAD_UART1_TXD__GPIO4_29			0x22c 0x61c 0x000 0x3 0x0
-#define MX51_PAD_UART1_TXD__PWM2_PWMO			0x22c 0x61c 0x000 0x1 0x0
-#define MX51_PAD_UART1_TXD__UART1_TXD			0x22c 0x61c 0x000 0x0 0x0
-#define MX51_PAD_UART1_RTS__GPIO4_30			0x230 0x620 0x000 0x3 0x0
-#define MX51_PAD_UART1_RTS__UART1_RTS			0x230 0x620 0x9e0 0x0 0x0
-#define MX51_PAD_UART1_CTS__GPIO4_31			0x234 0x624 0x000 0x3 0x0
-#define MX51_PAD_UART1_CTS__UART1_CTS			0x234 0x624 0x000 0x0 0x0
-#define MX51_PAD_UART2_RXD__FIRI_TXD			0x238 0x628 0x000 0x1 0x0
-#define MX51_PAD_UART2_RXD__GPIO1_20			0x238 0x628 0x000 0x3 0x0
-#define MX51_PAD_UART2_RXD__UART2_RXD			0x238 0x628 0x9ec 0x0 0x2
-#define MX51_PAD_UART2_TXD__FIRI_RXD			0x23c 0x62c 0x000 0x1 0x0
-#define MX51_PAD_UART2_TXD__GPIO1_21			0x23c 0x62c 0x000 0x3 0x0
-#define MX51_PAD_UART2_TXD__UART2_TXD			0x23c 0x62c 0x000 0x0 0x0
-#define MX51_PAD_UART3_RXD__CSI1_D0			0x240 0x630 0x000 0x2 0x0
-#define MX51_PAD_UART3_RXD__GPIO1_22			0x240 0x630 0x000 0x3 0x0
-#define MX51_PAD_UART3_RXD__UART1_DTR			0x240 0x630 0x000 0x0 0x0
-#define MX51_PAD_UART3_RXD__UART3_RXD			0x240 0x630 0x9f4 0x1 0x4
-#define MX51_PAD_UART3_TXD__CSI1_D1			0x244 0x634 0x000 0x2 0x0
-#define MX51_PAD_UART3_TXD__GPIO1_23			0x244 0x634 0x000 0x3 0x0
-#define MX51_PAD_UART3_TXD__UART1_DSR			0x244 0x634 0x000 0x0 0x0
-#define MX51_PAD_UART3_TXD__UART3_TXD			0x244 0x634 0x000 0x1 0x0
-#define MX51_PAD_OWIRE_LINE__GPIO1_24			0x248 0x638 0x000 0x3 0x0
-#define MX51_PAD_OWIRE_LINE__OWIRE_LINE			0x248 0x638 0x000 0x0 0x0
-#define MX51_PAD_OWIRE_LINE__SPDIF_OUT			0x248 0x638 0x000 0x6 0x0
-#define MX51_PAD_KEY_ROW0__KEY_ROW0			0x24c 0x63c 0x000 0x0 0x0
-#define MX51_PAD_KEY_ROW1__KEY_ROW1			0x250 0x640 0x000 0x0 0x0
-#define MX51_PAD_KEY_ROW2__KEY_ROW2			0x254 0x644 0x000 0x0 0x0
-#define MX51_PAD_KEY_ROW3__KEY_ROW3			0x258 0x648 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL0__KEY_COL0			0x25c 0x64c 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL0__PLL1_BYP			0x25c 0x64c 0x90c 0x7 0x0
-#define MX51_PAD_KEY_COL1__KEY_COL1			0x260 0x650 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL1__PLL2_BYP			0x260 0x650 0x910 0x7 0x0
-#define MX51_PAD_KEY_COL2__KEY_COL2			0x264 0x654 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL2__PLL3_BYP			0x264 0x654 0x000 0x7 0x0
-#define MX51_PAD_KEY_COL3__KEY_COL3			0x268 0x658 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL4__I2C2_SCL			0x26c 0x65c 0x9b8 0x3 0x1
-#define MX51_PAD_KEY_COL4__KEY_COL4			0x26c 0x65c 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL4__SPDIF_OUT1			0x26c 0x65c 0x000 0x6 0x0
-#define MX51_PAD_KEY_COL4__UART1_RI			0x26c 0x65c 0x000 0x1 0x0
-#define MX51_PAD_KEY_COL4__UART3_RTS			0x26c 0x65c 0x9f0 0x2 0x4
-#define MX51_PAD_KEY_COL5__I2C2_SDA			0x270 0x660 0x9bc 0x3 0x1
-#define MX51_PAD_KEY_COL5__KEY_COL5			0x270 0x660 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL5__UART1_DCD			0x270 0x660 0x000 0x1 0x0
-#define MX51_PAD_KEY_COL5__UART3_CTS			0x270 0x660 0x000 0x2 0x0
-#define MX51_PAD_USBH1_CLK__CSPI_SCLK			0x278 0x678 0x914 0x1 0x1
-#define MX51_PAD_USBH1_CLK__GPIO1_25			0x278 0x678 0x000 0x2 0x0
-#define MX51_PAD_USBH1_CLK__I2C2_SCL			0x278 0x678 0x9b8 0x5 0x2
-#define MX51_PAD_USBH1_CLK__USBH1_CLK			0x278 0x678 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DIR__CSPI_MOSI			0x27c 0x67c 0x91c 0x1 0x1
-#define MX51_PAD_USBH1_DIR__GPIO1_26			0x27c 0x67c 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DIR__I2C2_SDA			0x27c 0x67c 0x9bc 0x5 0x2
-#define MX51_PAD_USBH1_DIR__USBH1_DIR			0x27c 0x67c 0x000 0x0 0x0
-#define MX51_PAD_USBH1_STP__CSPI_RDY			0x280 0x680 0x000 0x1 0x0
-#define MX51_PAD_USBH1_STP__GPIO1_27			0x280 0x680 0x000 0x2 0x0
-#define MX51_PAD_USBH1_STP__UART3_RXD			0x280 0x680 0x9f4 0x5 0x6
-#define MX51_PAD_USBH1_STP__USBH1_STP			0x280 0x680 0x000 0x0 0x0
-#define MX51_PAD_USBH1_NXT__CSPI_MISO			0x284 0x684 0x918 0x1 0x0
-#define MX51_PAD_USBH1_NXT__GPIO1_28			0x284 0x684 0x000 0x2 0x0
-#define MX51_PAD_USBH1_NXT__UART3_TXD			0x284 0x684 0x000 0x5 0x0
-#define MX51_PAD_USBH1_NXT__USBH1_NXT			0x284 0x684 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA0__GPIO1_11			0x288 0x688 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA0__UART2_CTS			0x288 0x688 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0		0x288 0x688 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA1__GPIO1_12			0x28c 0x68c 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA1__UART2_RXD			0x28c 0x68c 0x9ec 0x1 0x4
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1		0x28c 0x68c 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA2__GPIO1_13			0x290 0x690 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA2__UART2_TXD			0x290 0x690 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2		0x290 0x690 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA3__GPIO1_14			0x294 0x694 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA3__UART2_RTS			0x294 0x694 0x9e8 0x1 0x5
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3		0x294 0x694 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA4__CSPI_SS0			0x298 0x698 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA4__GPIO1_15			0x298 0x698 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4		0x298 0x698 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA5__CSPI_SS1			0x29c 0x69c 0x920 0x1 0x0
-#define MX51_PAD_USBH1_DATA5__GPIO1_16			0x29c 0x69c 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5		0x29c 0x69c 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA6__CSPI_SS3			0x2a0 0x6a0 0x928 0x1 0x1
-#define MX51_PAD_USBH1_DATA6__GPIO1_17			0x2a0 0x6a0 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6		0x2a0 0x6a0 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3		0x2a4 0x6a4 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3		0x2a4 0x6a4 0x934 0x5 0x1
-#define MX51_PAD_USBH1_DATA7__GPIO1_18			0x2a4 0x6a4 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7		0x2a4 0x6a4 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN11__DI1_PIN11			0x2a8 0x6a8 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN11__ECSPI1_SS2			0x2a8 0x6a8 0x000 0x7 0x0
-#define MX51_PAD_DI1_PIN11__GPIO3_0			0x2a8 0x6a8 0x000 0x4 0x0
-#define MX51_PAD_DI1_PIN12__DI1_PIN12			0x2ac 0x6ac 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN12__GPIO3_1			0x2ac 0x6ac 0x978 0x4 0x1
-#define MX51_PAD_DI1_PIN13__DI1_PIN13			0x2b0 0x6b0 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN13__GPIO3_2			0x2b0 0x6b0 0x97c 0x4 0x1
-#define MX51_PAD_DI1_D0_CS__DI1_D0_CS			0x2b4 0x6b4 0x000 0x0 0x0
-#define MX51_PAD_DI1_D0_CS__GPIO3_3			0x2b4 0x6b4 0x980 0x4 0x1
-#define MX51_PAD_DI1_D1_CS__DI1_D1_CS			0x2b8 0x6b8 0x000 0x0 0x0
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN14			0x2b8 0x6b8 0x000 0x2 0x0
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN5			0x2b8 0x6b8 0x000 0x3 0x0
-#define MX51_PAD_DI1_D1_CS__GPIO3_4			0x2b8 0x6b8 0x984 0x4 0x1
-#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1		0x2bc 0x6bc 0x9a4 0x2 0x1
-#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN		0x2bc 0x6bc 0x9c4 0x0 0x0
-#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5		0x2bc 0x6bc 0x988 0x4 0x1
-#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6		0x2c0 0x6c0 0x000 0x3 0x0
-#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO		0x2c0 0x6c0 0x9c4 0x0 0x1
-#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6		0x2c0 0x6c0 0x98c 0x4 0x1
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17		0x2c4 0x6c4 0x000 0x2 0x0
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7		0x2c4 0x6c4 0x000 0x3 0x0
-#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK		0x2c4 0x6c4 0x000 0x0 0x0
-#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7		0x2c4 0x6c4 0x990 0x4 0x1
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16		0x2c8 0x6c8 0x000 0x2 0x0
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8		0x2c8 0x6c8 0x000 0x3 0x0
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS		0x2c8 0x6c8 0x000 0x0 0x0
-#define MX51_PAD_DISPB2_SER_RS__GPIO3_8			0x2c8 0x6c8 0x994 0x4 0x1
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0			0x2cc 0x6cc 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1			0x2d0 0x6d0 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2			0x2d4 0x6d4 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3			0x2d8 0x6d8 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4			0x2dc 0x6dc 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5			0x2e0 0x6e0 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC		0x2e4 0x6e4 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6			0x2e4 0x6e4 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG		0x2e8 0x6e8 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7			0x2e8 0x6e8 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT8__BOOT_SRC0			0x2ec 0x6ec 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8			0x2ec 0x6ec 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT9__BOOT_SRC1			0x2f0 0x6f0 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9			0x2f0 0x6f0 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE		0x2f4 0x6f4 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10		0x2f4 0x6f4 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2		0x2f8 0x6f8 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11		0x2f8 0x6f8 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL		0x2fc 0x6fc 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12		0x2fc 0x6fc 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0		0x300 0x700 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13		0x300 0x700 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1		0x304 0x704 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14		0x304 0x704 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH		0x308 0x708 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15		0x308 0x708 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0		0x30c 0x70c 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16		0x30c 0x70c 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1		0x310 0x710 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17		0x310 0x710 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0		0x314 0x714 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18		0x314 0x714 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN11		0x314 0x714 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN5		0x314 0x714 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1		0x318 0x718 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19		0x318 0x718 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN12		0x318 0x718 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN6		0x318 0x718 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0		0x31c 0x71c 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20		0x31c 0x71c 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN13		0x31c 0x71c 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN7		0x31c 0x71c 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1		0x320 0x720 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21		0x320 0x720 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN14		0x320 0x720 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN8		0x320 0x720 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0		0x324 0x724 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22		0x324 0x724 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS		0x324 0x724 0x000 0x6 0x0
-#define MX51_PAD_DISP1_DAT22__DISP2_DAT16		0x324 0x724 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1		0x328 0x728 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23		0x328 0x728 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS		0x328 0x728 0x000 0x6 0x0
-#define MX51_PAD_DISP1_DAT23__DISP2_DAT17		0x328 0x728 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS		0x328 0x728 0x000 0x4 0x0
-#define MX51_PAD_DI1_PIN3__DI1_PIN3			0x32c 0x72c 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN2__DI1_PIN2			0x330 0x734 0x000 0x0 0x0
-#define MX51_PAD_DI_GP2__DISP1_SER_CLK			0x338 0x740 0x000 0x0 0x0
-#define MX51_PAD_DI_GP2__DISP2_WAIT			0x338 0x740 0x9a8 0x2 0x1
-#define MX51_PAD_DI_GP3__CSI1_DATA_EN			0x33c 0x744 0x9a0 0x3 0x1
-#define MX51_PAD_DI_GP3__DISP1_SER_DIO			0x33c 0x744 0x9c0 0x0 0x0
-#define MX51_PAD_DI_GP3__FEC_TX_ER			0x33c 0x744 0x000 0x2 0x0
-#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN			0x340 0x748 0x99c 0x3 0x1
-#define MX51_PAD_DI2_PIN4__DI2_PIN4			0x340 0x748 0x000 0x0 0x0
-#define MX51_PAD_DI2_PIN4__FEC_CRS			0x340 0x748 0x950 0x2 0x1
-#define MX51_PAD_DI2_PIN2__DI2_PIN2			0x344 0x74c 0x000 0x0 0x0
-#define MX51_PAD_DI2_PIN2__FEC_MDC			0x344 0x74c 0x000 0x2 0x0
-#define MX51_PAD_DI2_PIN3__DI2_PIN3			0x348 0x750 0x000 0x0 0x0
-#define MX51_PAD_DI2_PIN3__FEC_MDIO			0x348 0x750 0x954 0x2 0x1
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK		0x34c 0x754 0x000 0x0 0x0
-#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1		0x34c 0x754 0x95c 0x2 0x1
-#define MX51_PAD_DI_GP4__DI2_PIN15			0x350 0x758 0x000 0x4 0x0
-#define MX51_PAD_DI_GP4__DISP1_SER_DIN			0x350 0x758 0x9c0 0x0 0x1
-#define MX51_PAD_DI_GP4__DISP2_PIN1			0x350 0x758 0x000 0x3 0x0
-#define MX51_PAD_DI_GP4__FEC_RDATA2			0x350 0x758 0x960 0x2 0x1
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0			0x354 0x75c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT0__FEC_RDATA3			0x354 0x75c 0x964 0x2 0x1
-#define MX51_PAD_DISP2_DAT0__KEY_COL6			0x354 0x75c 0x9c8 0x4 0x1
-#define MX51_PAD_DISP2_DAT0__UART3_RXD			0x354 0x75c 0x9f4 0x5 0x8
-#define MX51_PAD_DISP2_DAT0__USBH3_CLK			0x354 0x75c 0x9f8 0x3 0x1
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1			0x358 0x760 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT1__FEC_RX_ER			0x358 0x760 0x970 0x2 0x1
-#define MX51_PAD_DISP2_DAT1__KEY_COL7			0x358 0x760 0x9cc 0x4 0x1
-#define MX51_PAD_DISP2_DAT1__UART3_TXD			0x358 0x760 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT1__USBH3_DIR			0x358 0x760 0xa1c 0x3 0x1
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2			0x35c 0x764 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3			0x360 0x768 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4			0x364 0x76c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5			0x368 0x770 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT6__DISP2_DAT6			0x36c 0x774 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT6__FEC_TDATA1			0x36c 0x774 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT6__GPIO1_19			0x36c 0x774 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT6__KEY_ROW4			0x36c 0x774 0x9d0 0x4 0x1
-#define MX51_PAD_DISP2_DAT6__USBH3_STP			0x36c 0x774 0xa24 0x3 0x1
-#define MX51_PAD_DISP2_DAT7__DISP2_DAT7			0x370 0x778 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT7__FEC_TDATA2			0x370 0x778 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT7__GPIO1_29			0x370 0x778 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT7__KEY_ROW5			0x370 0x778 0x9d4 0x4 0x1
-#define MX51_PAD_DISP2_DAT7__USBH3_NXT			0x370 0x778 0xa20 0x3 0x1
-#define MX51_PAD_DISP2_DAT8__DISP2_DAT8			0x374 0x77c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT8__FEC_TDATA3			0x374 0x77c 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT8__GPIO1_30			0x374 0x77c 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT8__KEY_ROW6			0x374 0x77c 0x9d8 0x4 0x1
-#define MX51_PAD_DISP2_DAT8__USBH3_DATA0		0x374 0x77c 0x9fc 0x3 0x1
-#define MX51_PAD_DISP2_DAT9__AUD6_RXC			0x378 0x780 0x8f4 0x4 0x1
-#define MX51_PAD_DISP2_DAT9__DISP2_DAT9			0x378 0x780 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT9__FEC_TX_EN			0x378 0x780 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT9__GPIO1_31			0x378 0x780 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT9__USBH3_DATA1		0x378 0x780 0xa00 0x3 0x1
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10		0x37c 0x784 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS		0x37c 0x784 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT10__FEC_COL			0x37c 0x784 0x94c 0x2 0x1
-#define MX51_PAD_DISP2_DAT10__KEY_ROW7			0x37c 0x784 0x9dc 0x4 0x1
-#define MX51_PAD_DISP2_DAT10__USBH3_DATA2		0x37c 0x784 0xa04 0x3 0x1
-#define MX51_PAD_DISP2_DAT11__AUD6_TXD			0x380 0x788 0x8f0 0x4 0x1
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11		0x380 0x788 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK		0x380 0x788 0x968 0x2 0x1
-#define MX51_PAD_DISP2_DAT11__GPIO1_10			0x380 0x788 0x000 0x7 0x0
-#define MX51_PAD_DISP2_DAT11__USBH3_DATA3		0x380 0x788 0xa08 0x3 0x1
-#define MX51_PAD_DISP2_DAT12__AUD6_RXD			0x384 0x78c 0x8ec 0x4 0x1
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12		0x384 0x78c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT12__FEC_RX_DV			0x384 0x78c 0x96c 0x2 0x1
-#define MX51_PAD_DISP2_DAT12__USBH3_DATA4		0x384 0x78c 0xa0c 0x3 0x1
-#define MX51_PAD_DISP2_DAT13__AUD6_TXC			0x388 0x790 0x8fc 0x4 0x1
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13		0x388 0x790 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK		0x388 0x790 0x974 0x2 0x1
-#define MX51_PAD_DISP2_DAT13__USBH3_DATA5		0x388 0x790 0xa10 0x3 0x1
-#define MX51_PAD_DISP2_DAT14__AUD6_TXFS			0x38c 0x794 0x900 0x4 0x1
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14		0x38c 0x794 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT14__FEC_RDATA0		0x38c 0x794 0x958 0x2 0x1
-#define MX51_PAD_DISP2_DAT14__USBH3_DATA6		0x38c 0x794 0xa14 0x3 0x1
-#define MX51_PAD_DISP2_DAT15__AUD6_RXFS			0x390 0x798 0x8f8 0x4 0x1
-#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS		0x390 0x798 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15		0x390 0x798 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT15__FEC_TDATA0		0x390 0x798 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT15__USBH3_DATA7		0x390 0x798 0xa18 0x3 0x1
-#define MX51_PAD_SD1_CMD__AUD5_RXFS			0x394 0x79c 0x8e0 0x1 0x1
-#define MX51_PAD_SD1_CMD__CSPI_MOSI			0x394 0x79c 0x91c 0x2 0x2
-#define MX51_PAD_SD1_CMD__SD1_CMD			0x394 0x79c 0x000 0x0 0x0
-#define MX51_PAD_SD1_CLK__AUD5_RXC			0x398 0x7a0 0x8dc 0x1 0x1
-#define MX51_PAD_SD1_CLK__CSPI_SCLK			0x398 0x7a0 0x914 0x2 0x2
-#define MX51_PAD_SD1_CLK__SD1_CLK			0x398 0x7a0 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA0__AUD5_TXD			0x39c 0x7a4 0x8d8 0x1 0x2
-#define MX51_PAD_SD1_DATA0__CSPI_MISO			0x39c 0x7a4 0x918 0x2 0x1
-#define MX51_PAD_SD1_DATA0__SD1_DATA0			0x39c 0x7a4 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA0__EIM_DA0			0x01c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA1__EIM_DA1			0x020 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA2__EIM_DA2			0x024 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA3__EIM_DA3			0x028 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA1__AUD5_RXD			0x3a0 0x7a8 0x8d4 0x1 0x2
-#define MX51_PAD_SD1_DATA1__SD1_DATA1			0x3a0 0x7a8 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA4__EIM_DA4			0x02c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA5__EIM_DA5			0x030 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA6__EIM_DA6			0x034 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA7__EIM_DA7			0x038 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA2__AUD5_TXC			0x3a4 0x7ac 0x8e4 0x1 0x2
-#define MX51_PAD_SD1_DATA2__SD1_DATA2			0x3a4 0x7ac 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA10__EIM_DA10			0x044 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA11__EIM_DA11			0x048 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA8__EIM_DA8			0x03c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA9__EIM_DA9			0x040 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA3__AUD5_TXFS			0x3a8 0x7b0 0x8e8 0x1 0x2
-#define MX51_PAD_SD1_DATA3__CSPI_SS1			0x3a8 0x7b0 0x920 0x2 0x1
-#define MX51_PAD_SD1_DATA3__SD1_DATA3			0x3a8 0x7b0 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_0__CSPI_SS2			0x3ac 0x7b4 0x924 0x2 0x0
-#define MX51_PAD_GPIO1_0__GPIO1_0			0x3ac 0x7b4 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_0__SD1_CD			0x3ac 0x7b4 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_1__CSPI_MISO			0x3b0 0x7b8 0x918 0x2 0x2
-#define MX51_PAD_GPIO1_1__GPIO1_1			0x3b0 0x7b8 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_1__SD1_WP			0x3b0 0x7b8 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA12__EIM_DA12			0x04c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA13__EIM_DA13			0x050 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA14__EIM_DA14			0x054 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA15__EIM_DA15			0x058 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD2_CMD__CSPI_MOSI			0x3b4 0x7bc 0x91c 0x2 0x3
-#define MX51_PAD_SD2_CMD__I2C1_SCL			0x3b4 0x7bc 0x9b0 0x1 0x2
-#define MX51_PAD_SD2_CMD__SD2_CMD			0x3b4 0x7bc 0x000 0x0 0x0
-#define MX51_PAD_SD2_CLK__CSPI_SCLK			0x3b8 0x7c0 0x914 0x2 0x3
-#define MX51_PAD_SD2_CLK__I2C1_SDA			0x3b8 0x7c0 0x9b4 0x1 0x2
-#define MX51_PAD_SD2_CLK__SD2_CLK			0x3b8 0x7c0 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA0__CSPI_MISO			0x3bc 0x7c4 0x918 0x2 0x3
-#define MX51_PAD_SD2_DATA0__SD1_DAT4			0x3bc 0x7c4 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA0__SD2_DATA0			0x3bc 0x7c4 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA1__SD1_DAT5			0x3c0 0x7c8 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA1__SD2_DATA1			0x3c0 0x7c8 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA1__USBH3_H2_DP			0x3c0 0x7c8 0x000 0x2 0x0
-#define MX51_PAD_SD2_DATA2__SD1_DAT6			0x3c4 0x7cc 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA2__SD2_DATA2			0x3c4 0x7cc 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA2__USBH3_H2_DM			0x3c4 0x7cc 0x000 0x2 0x0
-#define MX51_PAD_SD2_DATA3__CSPI_SS2			0x3c8 0x7d0 0x924 0x2 0x1
-#define MX51_PAD_SD2_DATA3__SD1_DAT7			0x3c8 0x7d0 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA3__SD2_DATA3			0x3c8 0x7d0 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_2__CCM_OUT_2			0x3cc 0x7d4 0x000 0x5 0x0
-#define MX51_PAD_GPIO1_2__GPIO1_2			0x3cc 0x7d4 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_2__I2C2_SCL			0x3cc 0x7d4 0x9b8 0x2 0x3
-#define MX51_PAD_GPIO1_2__PLL1_BYP			0x3cc 0x7d4 0x90c 0x7 0x1
-#define MX51_PAD_GPIO1_2__PWM1_PWMO			0x3cc 0x7d4 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_3__GPIO1_3			0x3d0 0x7d8 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_3__I2C2_SDA			0x3d0 0x7d8 0x9bc 0x2 0x3
-#define MX51_PAD_GPIO1_3__PLL2_BYP			0x3d0 0x7d8 0x910 0x7 0x1
-#define MX51_PAD_GPIO1_3__PWM2_PWMO			0x3d0 0x7d8 0x000 0x1 0x0
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ		0x3d4 0x7fc 0x000 0x0 0x0
-#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B		0x3d4 0x7fc 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK			0x3d8 0x804 0x908 0x4 0x1
-#define MX51_PAD_GPIO1_4__EIM_RDY			0x3d8 0x804 0x938 0x3 0x1
-#define MX51_PAD_GPIO1_4__GPIO1_4			0x3d8 0x804 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B			0x3d8 0x804 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_5__CSI2_MCLK			0x3dc 0x808 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_5__DISP2_PIN16			0x3dc 0x808 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_5__GPIO1_5			0x3dc 0x808 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B			0x3dc 0x808 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_6__DISP2_PIN17			0x3e0 0x80c 0x000 0x4 0x0
-#define MX51_PAD_GPIO1_6__GPIO1_6			0x3e0 0x80c 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_6__REF_EN_B			0x3e0 0x80c 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_7__CCM_OUT_0			0x3e4 0x810 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_7__GPIO1_7			0x3e4 0x810 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_7__SD2_WP			0x3e4 0x810 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_7__SPDIF_OUT1			0x3e4 0x810 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_8__CSI2_DATA_EN			0x3e8 0x814 0x99c 0x2 0x2
-#define MX51_PAD_GPIO1_8__GPIO1_8			0x3e8 0x814 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_8__SD2_CD			0x3e8 0x814 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_8__USBH3_PWR			0x3e8 0x814 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_9__CCM_OUT_1			0x3ec 0x818 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_9__DISP2_D1_CS			0x3ec 0x818 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_9__DISP2_SER_CS			0x3ec 0x818 0x000 0x7 0x0
-#define MX51_PAD_GPIO1_9__GPIO1_9			0x3ec 0x818 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_9__SD2_LCTL			0x3ec 0x818 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_9__USBH3_OC			0x3ec 0x818 0x000 0x1 0x0
-
-#endif /* __DTS_IMX51_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
deleted file mode 100644
index f7408722d68ab..0000000000000
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * Copyright 2015 Savoir-faire Linux
- *
- * This device tree is based on imx51-babbage.dts
- *
- * Licensed under the X11 license or the GPL v2 (or later)
- */
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Technologic Systems TS-4800";
-	compatible = "technologic,imx51-ts4800", "fsl,imx51";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x10000000>;
-	};
-
-	clocks {
-		ckih1 {
-			clock-frequency = <22579200>;
-		};
-
-		ckih2 {
-			clock-frequency = <24576000>;
-		};
-	};
-
-	backlight_reg: regulator-backlight {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_enable_lcd>;
-		regulator-name = "enable_lcd_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 78770>;
-		brightness-levels = <0 150 200 255>;
-		default-brightness-level = <1>;
-		power-supply = <&backlight_reg>;
-	};
-
-	display1: disp1 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd>;
-
-		display-timings {
-			800x480p60 {
-				native-mode;
-				clock-frequency = <30066000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <50>;
-				hback-porch = <70>;
-				hsync-len = <50>;
-				vback-porch = <0>;
-				vfront-porch = <0>;
-				vsync-len = <50>;
-			};
-		};
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp1>;
-			};
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	rtc: rtc@68 {
-		compatible = "st,m41t00";
-		reg = <0x68>;
-	};
-};
-
-&ipu_di0_disp1 {
-	remote-endpoint = <&display0_in>;
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm_backlight>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim>;
-	status = "okay";
-
-	fpga@0 {
-		compatible = "simple-bus";
-		fsl,weim-cs-timing = <0x0061008F 0x00000002 0x1c022000
-				      0x00000000 0x1c092480 0x00000000>;
-		reg = <0 0x0000000 0x1d000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x1d000>;
-
-		syscon: syscon@10000 {
-			compatible = "syscon", "simple-mfd";
-			reg = <0x10000 0x3d>;
-			reg-io-width = <2>;
-
-			wdt {
-				compatible = "technologic,ts4800-wdt";
-				syscon = <&syscon 0xe>;
-			};
-		};
-
-		touchscreen@12000 {
-			compatible = "technologic,ts4800-ts";
-			reg = <0x12000 0x1000>;
-			syscon = <&syscon 0x10 6>;
-		};
-
-		fpga_irqc: fpga-irqc@15000 {
-			compatible = "technologic,ts4800-irqc";
-			reg = <0x15000 0x1000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_interrupt_fpga>;
-			interrupt-parent = <&gpio2>;
-			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		can@1a000 {
-			compatible = "technologic,sja1000";
-			reg = <0x1a000 0x100>;
-			interrupt-parent = <&fpga_irqc>;
-			interrupts = <1>;
-			reg-io-width = <2>;
-			nxp,tx-output-config = <0x06>;
-			nxp,external-clock-frequency = <24000000>;
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
-		>;
-	};
-
-	pinctrl_enable_lcd: enablelcdgrp {
-		fsl,pins = <
-			MX51_PAD_CSI2_D12__GPIO4_9		0x1c5
-		>;
-	};
-
-	pinctrl_esdhc1: esdhc1grp {
-		fsl,pins = <
-			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			MX51_PAD_GPIO1_0__GPIO1_0		0x100
-			MX51_PAD_GPIO1_1__GPIO1_1		0x100
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
-			MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
-			MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
-			MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
-			MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
-			MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
-			MX51_PAD_DISP2_DAT10__FEC_COL		0x00000180
-			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x00000180
-			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x00002180
-			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x00002004
-			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
-			MX51_PAD_DI2_PIN2__FEC_MDC		0x00002004
-			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x00002004
-			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x00002004
-			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x00002004
-			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x00002004
-			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x00002180
-			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x000020a4
-			MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
-			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
-		>;
-	};
-
-	pinctrl_interrupt_fpga: fpgaicgrp {
-		fsl,pins = <
-			MX51_PAD_EIM_D27__GPIO2_9		0xe5
-		>;
-	};
-
-	pinctrl_lcd: lcdgrp {
-		fsl,pins = <
-			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
-			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
-			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
-			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
-			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
-			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
-			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
-			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
-			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
-			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
-			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
-			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
-			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
-			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
-			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
-			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
-			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
-			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
-			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
-			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
-			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
-			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
-			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
-			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
-			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
-			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
-			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
-			MX51_PAD_DI_GP4__DI2_PIN15		0x5
-		>;
-	};
-
-	pinctrl_pwm_backlight: backlightgrp {
-		fsl,pins = <
-			MX51_PAD_GPIO1_2__PWM1_PWMO		0x80000000
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
-			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
-			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
-		>;
-	};
-
-	pinctrl_weim: weimgrp {
-		fsl,pins = <
-			MX51_PAD_EIM_DTACK__EIM_DTACK		0x85
-			MX51_PAD_EIM_CS0__EIM_CS0		0x0
-			MX51_PAD_EIM_CS1__EIM_CS1		0x0
-			MX51_PAD_EIM_EB0__EIM_EB0		0x85
-			MX51_PAD_EIM_EB1__EIM_EB1		0x85
-			MX51_PAD_EIM_OE__EIM_OE			0x85
-			MX51_PAD_EIM_LBA__EIM_LBA		0x85
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
deleted file mode 100644
index e537e06e11d7e..0000000000000
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ /dev/null
@@ -1,894 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2017 Zodiac Inflight Innovations
- */
-
-/dts-v1/;
-#include "imx51.dtsi"
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	model = "ZII RDU1 Board";
-	compatible = "zii,imx51-rdu1", "fsl,imx51";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	/* Will be filled by the bootloader */
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0>;
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio_gpio;
-		rtc0 = &ds1341;
-	};
-
-	clk_26M_osc: 26M_osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	clk_26M_osc_gate: 26M_gate {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clk26mhz>;
-		clocks = <&clk_26M_osc>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	clk_26M_usb: usbhost_gate {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbgate26mhz>;
-		clocks = <&clk_26M_osc_gate>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	};
-
-	clk_26M_snd: snd_gate {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sndgate26mhz>;
-		clocks = <&clk_26M_osc_gate>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_5p0v_main: regulator-5p0v-main {
-		compatible = "regulator-fixed";
-		regulator-name = "5V_MAIN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	disp0 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			display_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	panel {
-		/* no compatible here, bootloader will patch in correct one */
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_panel>;
-		power-supply = <&reg_3p3v>;
-		enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	i2c_gpio: i2c-gpio {
-		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_swi2c>;
-		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */
-			<&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */
-		i2c-gpio,delay-us = <50>;
-		status = "okay";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sgtl5000: codec@a {
-			compatible = "fsl,sgtl5000";
-			reg = <0x0a>;
-			clocks = <&clk_26M_snd>;
-			VDDA-supply = <&vdig_reg>;
-			VDDIO-supply = <&vvideo_reg>;
-			#sound-dai-cells = <0>;
-		};
-	};
-
-	spi_gpio: spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiospi0>;
-		status = "okay";
-
-		gpio-sck = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio4 12 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio4 11 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-		cs-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
-
-		eeprom@0 {
-			compatible = "eeprom-93xx46";
-			reg = <0>;
-			spi-max-frequency = <1000000>;
-			spi-cs-high;
-			data-size = <8>;
-		};
-	};
-
-	mdio_gpio: mdio-gpio {
-		compatible = "virtual,mdio-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_swmdio>;
-		gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>, /* mdc */
-			<&gpio3 25 GPIO_ACTIVE_HIGH>; /* mdio */
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@0 {
-			compatible = "marvell,mv88e6085";
-			reg = <0>;
-			dsa,member = <0 0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "cpu";
-					ethernet = <&fec>;
-
-					fixed-link {
-						speed = <100>;
-						full-duplex;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "netaux";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "netright";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "netleft";
-				};
-			};
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Front";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_codec>;
-		simple-audio-card,frame-master = <&sound_codec>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Headphone Jack", "TPA6130A2 HPLEFT",
-			"Headphone Jack", "TPA6130A2 HPRIGHT";
-		simple-audio-card,aux-devs = <&hpa1>;
-
-		sound_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi2>;
-		};
-
-		sound_codec: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-			clocks = <&clk_26M_snd>;
-		};
-	};
-
-	usbh1phy: usbphy1 {
-		compatible = "usb-nop-xceiv";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1phy>;
-		clocks = <&clk_26M_usb>;
-		clock-names = "main_clk";
-		reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&vusb_reg>;
-		#phy-cells = <0>;
-	};
-
-	usbh2phy: usbphy2 {
-		compatible = "usb-nop-xceiv";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh2phy>;
-		clocks = <&clk_26M_usb>;
-		clock-names = "main_clk";
-		reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&vusb_reg>;
-		#phy-cells = <0>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	ssi2 {
-		fsl,audmux-port = <1>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			 IMX_AUDMUX_V2_PTCR_TFSEL(2) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(2) |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
-	};
-
-	aud3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
-		>;
-	};
-};
-
-&cpu {
-	cpu-supply = <&sw1_reg>;
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pmic@0 {
-		compatible = "fsl,mc13892";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		spi-max-frequency = <6000000>;
-		spi-cs-high;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,mc13xxx-uses-adc;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1375000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vdig_reg: vdig {
-				regulator-min-microvolt = <1650000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-			};
-
-			vsd_reg: vsd {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3150000>;
-			};
-
-			vusb_reg: vusb {
-				regulator-always-on;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-min-microvolt = <2400000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vvideo_reg: vvideo {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-min-microvolt = <2300000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2900000>;
-				regulator-always-on;
-			};
-		};
-
-		leds {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			led-control = <0x0 0x0 0x3f83f8 0x0>;
-
-			sysled0@3 {
-				reg = <3>;
-				label = "system:green:status";
-				linux,default-trigger = "default-on";
-			};
-
-			sysled1@4 {
-				reg = <4>;
-				label = "system:green:act";
-				linux,default-trigger = "heartbeat";
-			};
-		};
-	};
-
-	flash@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at45db642d", "atmel,at45", "atmel,dataflash";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	no-sdio;
-	no-sd;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-	phy-supply = <&vgen3_reg>;
-	status = "okay";
-};
-
-&gpio1 {
-	gpio-line-names = "", "", "", "",
-			  "", "", "", "",
-			  "", "hp-amp-shutdown-b", "", "",
-			  "", "", "", "",
-			  "", "", "", "",
-			  "", "", "", "",
-			  "", "", "", "",
-			  "", "", "", "";
-
-	unused-sd3-wp-hog {
-		/*
-		 * See pinctrl_esdhc1 below for more details on this
-		 */
-		gpio-hog;
-		gpios = <1 GPIO_ACTIVE_HIGH>;
-		output-high;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	hpa1: amp@60 {
-		compatible = "ti,tpa6130a2";
-		reg = <0x60>;
-		Vdd-supply = <&reg_3p3v>;
-		sound-name-prefix = "TPA6130A2";
-	};
-
-	ds1341: rtc@68 {
-		compatible = "dallas,ds1341";
-		reg = <0x68>;
-	};
-
-	/* touch nodes default disabled, bootloader will enable the right one */
-
-	touchscreen@4b {
-		compatible = "atmel,maxtouch";
-		reg = <0x4b>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ts>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
-		status = "disabled";
-	};
-
-	touchscreen@4c {
-		compatible = "atmel,maxtouch";
-		reg = <0x4c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ts>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
-		status = "disabled";
-	};
-
-	touchscreen@20 {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x20>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ts>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
-		status = "disabled";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <2>;
-		};
-
-		rmi4-f11@11 {
-			reg = <0x11>;
-			touchscreen-inverted-x;
-			touchscreen-swapped-x-y;
-			syna,sensor-type = <1>;
-		};
-	};
-
-};
-
-&ipu_di0_disp1 {
-	remote-endpoint = <&display_in>;
-};
-
-&pmu {
-	secure-reg-access;
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-
-	mcu {
-		compatible = "zii,rave-sp-rdu1";
-		current-speed = <38400>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		watchdog {
-			compatible = "zii,rave-sp-watchdog";
-		};
-
-		backlight {
-			compatible = "zii,rave-sp-backlight";
-		};
-
-		pwrbutton {
-			compatible = "zii,rave-sp-pwrbutton";
-		};
-
-		eeprom@a3 {
-			compatible = "zii,rave-sp-eeprom";
-			reg = <0xa3 0x2000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			zii,eeprom-name = "dds-eeprom";
-		};
-
-		eeprom@a4 {
-			compatible = "zii,rave-sp-eeprom";
-			reg = <0xa4 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			zii,eeprom-name = "main-eeprom";
-		};
-
-		eeprom@ae {
-			compatible = "zii,rave-sp-eeprom";
-			reg = <0xae 0x200>;
-			zii,eeprom-name = "switch-eeprom";
-			/*
-			 * Not all RDU1s have this functionality, so we
-			 * rely on the bootloader to enable this
-			 */
-			status = "disabled";
-		};
-	};
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	fsl,usbphy = <&usbh1phy>;
-	disable-over-current;
-	maximum-speed = "full-speed";
-	vbus-supply = <&reg_5p0v_main>;
-	status = "okay";
-};
-
-&usbh2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh2>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	fsl,usbphy = <&usbh2phy>;
-	disable-over-current;
-	vbus-supply = <&reg_5p0v_main>;
-	status = "okay";
-};
-
-&usbphy0 {
-	vcc-supply = <&vusb_reg>;
-};
-
-&usbotg {
-	dr_mode = "host";
-	disable-over-current;
-	phy_type = "utmi_wide";
-	vbus-supply = <&reg_5p0v_main>;
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX51_PAD_GPIO1_9__GPIO1_9		0x5e
-		>;
-	};
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0xa5
-			MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x85
-			MX51_PAD_AUD3_BB_CK__AUD3_TXC		0xa5
-			MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x85
-		>;
-	};
-
-	pinctrl_clk26mhz: clk26mhzgrp {
-		fsl,pins = <
-			MX51_PAD_DI1_PIN12__GPIO3_1		0x85
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
-			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
-		>;
-	};
-
-	pinctrl_esdhc1: esdhc1grp {
-		fsl,pins = <
-			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			/*
-			 * GPIO1_1 is not directly used by eSDHC1 in
-			 * any capacity, but earlier versions of RDU1
-			 * used that pin as WP GPIO for eSDHC3 and
-			 * because of that that pad has an external
-			 * pull-up resistor. This is problematic
-			 * because out of reset the pad is configured
-			 * as ALT0 which serves as SD1_WP, which, when
-			 * pulled high by and external pull-up, will
-			 * inhibit execution of any write request to
-			 * attached eMMC device.
-			 *
-			 * To avoid this problem we configure the pad
-			 * to ALT1/GPIO and avoid driving SD1_WP
-			 * signal high.
-			 */
-			MX51_PAD_GPIO1_1__GPIO1_1		0x0000
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX51_PAD_EIM_EB2__FEC_MDIO		0x1f5
-			MX51_PAD_NANDF_D9__FEC_RDATA0		0x2180
-			MX51_PAD_EIM_EB3__FEC_RDATA1		0x180
-			MX51_PAD_EIM_CS2__FEC_RDATA2		0x180
-			MX51_PAD_EIM_CS3__FEC_RDATA3		0x180
-			MX51_PAD_EIM_CS4__FEC_RX_ER		0x180
-			MX51_PAD_NANDF_D11__FEC_RX_DV		0x2084
-			MX51_PAD_EIM_CS5__FEC_CRS		0x180
-			MX51_PAD_NANDF_RB2__FEC_COL		0x2180
-			MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x2180
-			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x2004
-			MX51_PAD_NANDF_CS3__FEC_MDC		0x2004
-			MX51_PAD_NANDF_D8__FEC_TDATA0		0x2180
-			MX51_PAD_NANDF_CS4__FEC_TDATA1		0x2004
-			MX51_PAD_NANDF_CS5__FEC_TDATA2		0x2004
-			MX51_PAD_NANDF_CS6__FEC_TDATA3		0x2004
-			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
-			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
-			MX51_PAD_EIM_A20__GPIO2_14		0x85
-		>;
-	};
-
-	pinctrl_gpiospi0: gpiospi0grp {
-		fsl,pins = <
-			MX51_PAD_CSI2_D18__GPIO4_11		0x85
-			MX51_PAD_CSI2_D19__GPIO4_12		0x85
-			MX51_PAD_CSI2_HSYNC__GPIO4_14		0x85
-			MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x85
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
-			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
-		>;
-	};
-
-	pinctrl_ipu_disp1: ipudisp1grp {
-		fsl,pins = <
-			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
-			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
-			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
-			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
-			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
-			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
-			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
-			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
-			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
-			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
-			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
-			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
-			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
-			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
-			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
-			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
-			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
-			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
-			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
-			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
-			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
-			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
-			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
-			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
-			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
-			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
-			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
-		>;
-	};
-
-	pinctrl_panel: panelgrp {
-		fsl,pins = <
-			MX51_PAD_DI1_D0_CS__GPIO3_3		0x85
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX51_PAD_GPIO1_4__GPIO1_4		0x1e0
-			MX51_PAD_GPIO1_8__GPIO1_8		0x21e2
-		>;
-	};
-
-	pinctrl_sndgate26mhz: sndgate26mhzgrp {
-		fsl,pins = <
-			MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
-		>;
-	};
-
-	pinctrl_swi2c: swi2cgrp {
-		fsl,pins = <
-			MX51_PAD_GPIO1_2__GPIO1_2		0xc5
-			MX51_PAD_DI1_D1_CS__GPIO3_4		0x400001f5
-		>;
-	};
-
-	pinctrl_swmdio: swmdiogrp {
-		fsl,pins = <
-			MX51_PAD_NANDF_D14__GPIO3_26		0x21e6
-			MX51_PAD_NANDF_D15__GPIO3_25		0x21e6
-		>;
-	};
-
-	pinctrl_ts: tsgrp {
-		fsl,pins = <
-			MX51_PAD_CSI1_D8__GPIO3_12		0x04
-			MX51_PAD_CSI1_D9__GPIO3_13		0x85
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-			MX51_PAD_UART1_RTS__UART1_RTS		0x1c4
-			MX51_PAD_UART1_CTS__UART1_CTS		0x1c4
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX51_PAD_UART2_RXD__UART2_RXD		0xc5
-			MX51_PAD_UART2_TXD__UART2_TXD		0xc5
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
-			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
-		>;
-	};
-
-	pinctrl_usbgate26mhz: usbgate26mhzgrp {
-		fsl,pins = <
-			MX51_PAD_DISP2_DAT6__GPIO1_19		0x85
-		>;
-	};
-
-	pinctrl_usbh1: usbh1grp {
-		fsl,pins = <
-			MX51_PAD_USBH1_STP__USBH1_STP		0x0
-			MX51_PAD_USBH1_CLK__USBH1_CLK		0x0
-			MX51_PAD_USBH1_DIR__USBH1_DIR		0x0
-			MX51_PAD_USBH1_NXT__USBH1_NXT		0x0
-			MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x0
-			MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x0
-			MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x0
-			MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x0
-			MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x0
-			MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x0
-			MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x0
-			MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x0
-		>;
-	};
-
-	pinctrl_usbh1phy: usbh1phygrp {
-		fsl,pins = <
-			MX51_PAD_NANDF_D0__GPIO4_8		0x85
-		>;
-	};
-
-	pinctrl_usbh2: usbh2grp {
-		fsl,pins = <
-			MX51_PAD_EIM_A26__USBH2_STP		0x0
-			MX51_PAD_EIM_A24__USBH2_CLK		0x0
-			MX51_PAD_EIM_A25__USBH2_DIR		0x0
-			MX51_PAD_EIM_A27__USBH2_NXT		0x0
-			MX51_PAD_EIM_D16__USBH2_DATA0		0x0
-			MX51_PAD_EIM_D17__USBH2_DATA1		0x0
-			MX51_PAD_EIM_D18__USBH2_DATA2		0x0
-			MX51_PAD_EIM_D19__USBH2_DATA3		0x0
-			MX51_PAD_EIM_D20__USBH2_DATA4		0x0
-			MX51_PAD_EIM_D21__USBH2_DATA5		0x0
-			MX51_PAD_EIM_D22__USBH2_DATA6		0x0
-			MX51_PAD_EIM_D23__USBH2_DATA7		0x0
-		>;
-	};
-
-	pinctrl_usbh2phy: usbh2phygrp {
-		fsl,pins = <
-			MX51_PAD_NANDF_D1__GPIO4_7		0x85
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
deleted file mode 100644
index 21dd3f7abd488..0000000000000
--- a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
+++ /dev/null
@@ -1,457 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-
-/*
- * Copyright (C) 2018 Zodiac Inflight Innovations
- */
-
-/dts-v1/;
-
-#include "imx51.dtsi"
-
-/ {
-	model = "ZII SCU2 Mezz Board";
-	compatible = "zii,imx51-scu2-mezz", "fsl,imx51";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	/* Will be filled by the bootloader */
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0>;
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio_gpio;
-	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_mmc_reset>;
-		gpio = <&gpio3 13 GPIO_ACTIVE_LOW>;
-		startup-delay-us = <150000>;
-		regulator-name = "usb_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	mdio_gpio: mdio-gpio {
-		compatible = "virtual,mdio-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_swmdio>;
-		gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>, /* mdc */
-			<&gpio2 6 GPIO_ACTIVE_HIGH>; /* mdio */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@0 {
-			compatible = "marvell,mv88e6085";
-			reg = <0>;
-			dsa,member = <0 0>;
-			eeprom-length = <512>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "port4";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "port5";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "port6";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "port7";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "cpu";
-					ethernet = <&fec>;
-
-					fixed-link {
-						speed = <100>;
-						full-duplex;
-					};
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "mezz2esb";
-					phy-mode = "sgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
-};
-
-&cpu {
-	cpu-supply = <&sw1_reg>;
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pmic@0 {
-		compatible = "fsl,mc13892";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		spi-max-frequency = <6000000>;
-		spi-cs-high;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,mc13xxx-uses-adc;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1375000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vdig_reg: vdig {
-				regulator-min-microvolt = <1650000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-			};
-
-			vsd_reg: vsd {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vusb_reg: vusb {
-				regulator-always-on;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-min-microvolt = <2400000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vvideo_reg: vvideo {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-min-microvolt = <2300000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2900000>;
-				regulator-always-on;
-			};
-		};
-
-		leds {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			led-control = <0x0 0x0 0x3f83f8 0x0>;
-
-			sysled3: led3@3 {
-				reg = <3>;
-				label = "system:red:power";
-				linux,default-trigger = "default-on";
-			};
-
-			sysled4: led4@4 {
-				reg = <4>;
-				label = "system:green:act";
-				linux,default-trigger = "heartbeat";
-			};
-		};
-	};
-
-	flash@1 {
-		compatible = "atmel,at45", "atmel,dataflash";
-		reg = <1>;
-		spi-max-frequency = <25000000>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	no-sdio;
-	no-sd;
-	status = "okay";
-};
-
-&esdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc4>;
-	bus-width = <4>;
-	no-1-8-v;
-	no-sdio;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	status = "okay";
-	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	phy-supply = <&vgen3_reg>;
-	phy-handle = <&ethphy>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@0 {
-			reg = <0>;
-			max-speed = <100>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c04";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-
-	mcu {
-		compatible = "zii,rave-sp-mezz";
-		current-speed = <57600>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		watchdog {
-			compatible = "zii,rave-sp-watchdog-legacy";
-		};
-
-		eeprom@a4 {
-			compatible = "zii,rave-sp-eeprom";
-			reg = <0xa4 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			zii,eeprom-name = "main-eeprom";
-		};
-	};
-};
-
-&usbotg {
-	dr_mode = "host";
-	disable-over-current;
-	phy_type = "utmi_wide";
-	vbus-supply = <&usb_vbus>;
-	status = "okay";
-};
-
-&usbphy0 {
-	vcc-supply = <&vusb2_reg>;
-};
-
-&vpu {
-	status = "disabled";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
-			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
-		>;
-	};
-
-	pinctrl_esdhc1: esdhc1grp {
-		fsl,pins = <
-			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			MX51_PAD_SD2_DATA0__SD1_DAT4		0x20d5
-			MX51_PAD_SD2_DATA1__SD1_DAT5		0x20d5
-			MX51_PAD_SD2_DATA2__SD1_DAT6		0x20d5
-			MX51_PAD_SD2_DATA3__SD1_DAT7		0x20d5
-		>;
-	};
-
-	pinctrl_esdhc4: esdhc4grp {
-		fsl,pins = <
-			MX51_PAD_NANDF_RB1__SD4_CMD		0x400020d5
-			MX51_PAD_NANDF_CS2__SD4_CLK		0x20d5
-			MX51_PAD_NANDF_CS3__SD4_DAT0		0x20d5
-			MX51_PAD_NANDF_CS4__SD4_DAT1		0x20d5
-			MX51_PAD_NANDF_CS5__SD4_DAT2		0x20d5
-			MX51_PAD_NANDF_CS6__SD4_DAT3		0x20d5
-			MX51_PAD_NANDF_D0__GPIO4_8		0x100
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x2004
-			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x2004
-			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x2004
-			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x2004
-			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
-			MX51_PAD_DISP2_DAT10__FEC_COL		0x0180
-			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x0180
-			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x20a4
-			MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x20a4
-			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
-			MX51_PAD_DI_GP3__FEC_TX_ER		0x2004
-			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x2180
-			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x0085
-			MX51_PAD_DI_GP4__FEC_RDATA2		0x0085
-			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x0085
-			MX51_PAD_DI2_PIN2__FEC_MDC		0x2004
-			MX51_PAD_DI2_PIN3__FEC_MDIO		0x01f5
-			MX51_PAD_DI2_PIN4__FEC_CRS		0x0180
-			MX51_PAD_EIM_A20__GPIO2_14		0x0085
-			MX51_PAD_EIM_A21__GPIO2_15		0x00e5
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
-			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX51_PAD_GPIO1_4__GPIO1_4		0x85
-			MX51_PAD_GPIO1_8__GPIO1_8		0xe5
-		>;
-	};
-
-	pinctrl_swmdio: swmdiogrp {
-		fsl,pins = <
-			MX51_PAD_EIM_D22__GPIO2_6		0x100
-			MX51_PAD_EIM_D23__GPIO2_7		0x100
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-		>;
-	};
-
-	pinctrl_usb_mmc_reset: usbmmcgrp {
-		fsl,pins = <
-			MX51_PAD_CSI1_D9__GPIO3_13		0x85
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
deleted file mode 100644
index 9f857eb44bf72..0000000000000
--- a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
+++ /dev/null
@@ -1,472 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-
-/*
- * Copyright (C) 2018 Zodiac Inflight Innovations
- */
-
-/dts-v1/;
-
-#include "imx51.dtsi"
-
-/ {
-	model = "ZII SCU3 ESB board";
-	compatible = "zii,imx51-scu3-esb", "fsl,imx51";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	/* Will be filled by the bootloader */
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0>;
-	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_mmc_reset>;
-		gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
-		startup-delay-us = <150000>;
-	};
-};
-
-&cpu {
-	cpu-supply = <&sw1_reg>;
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pmic@0 {
-		compatible = "fsl,mc13892";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		spi-max-frequency = <6000000>;
-		spi-cs-high;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,mc13xxx-uses-adc;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1375000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vdig_reg: vdig {
-				regulator-min-microvolt = <1650000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-			};
-
-			vsd_reg: vsd {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3150000>;
-			};
-
-			vusb_reg: vusb {
-				regulator-always-on;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-min-microvolt = <2400000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vvideo_reg: vvideo {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-min-microvolt = <2300000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2900000>;
-				regulator-always-on;
-			};
-		};
-
-		leds {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			led-control = <0x0 0x0 0x3f83f8 0x0>;
-
-			sysled3: led3@3 {
-				reg = <3>;
-				label = "system:red:power";
-				linux,default-trigger = "default-on";
-			};
-
-			sysled4: led4@4 {
-				reg = <4>;
-				label = "system:green:act";
-				linux,default-trigger = "heartbeat";
-			};
-		};
-	};
-
-	flash@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at45", "atmel,dataflash";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	no-sdio;
-	no-sd;
-	status = "okay";
-};
-
-&esdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc4>;
-	bus-width = <4>;
-	no-1-8-v;
-	no-sdio;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	status = "okay";
-
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-
-	fec_mdio: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		switch@0 {
-			compatible = "marvell,mv88e6085";
-			reg = <0>;
-			dsa,member = <0 0>;
-			eeprom-length = <512>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_switch>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "port1";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "port2";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "port3";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "scu2scu";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "esb2host";
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "esb2mezz";
-					phy-mode = "sgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					phy-mode = "mii";
-					ethernet = <&fec>;
-
-					fixed-link {
-						speed = <100>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
-};
-
-&ipu {
-	status = "disabled";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c04";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
-	lm75@48 {
-		compatible = "national,lm75";
-		reg = <0x48>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-
-	mcu {
-		compatible = "zii,rave-sp-esb";
-		current-speed = <57600>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		watchdog {
-			compatible = "zii,rave-sp-watchdog-legacy";
-		};
-
-		eeprom@a4 {
-			compatible = "zii,rave-sp-eeprom";
-			reg = <0xa4 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			zii,eeprom-name = "main-eeprom";
-		};
-	};
-};
-
-&usbotg {
-	dr_mode = "host";
-	disable-over-current;
-	phy_type = "utmi_wide";
-	vbus-supply = <&usb_vbus>;
-	status = "okay";
-};
-
-&usbphy0 {
-	vcc-supply = <&vusb2_reg>;
-};
-
-&vpu {
-	status = "disabled";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
-			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
-		>;
-	};
-
-	pinctrl_esdhc1: esdhc1grp {
-		fsl,pins = <
-			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			MX51_PAD_SD2_DATA0__SD1_DAT4		0x20d5
-			MX51_PAD_SD2_DATA1__SD1_DAT5		0x20d5
-			MX51_PAD_SD2_DATA2__SD1_DAT6		0x20d5
-			MX51_PAD_SD2_DATA3__SD1_DAT7		0x20d5
-		>;
-	};
-
-	pinctrl_esdhc4: esdhc4grp {
-		fsl,pins = <
-			MX51_PAD_NANDF_RB1__SD4_CMD		0x400020d5
-			MX51_PAD_NANDF_CS2__SD4_CLK		0x20d5
-			MX51_PAD_NANDF_CS3__SD4_DAT0		0x20d5
-			MX51_PAD_NANDF_CS4__SD4_DAT1		0x20d5
-			MX51_PAD_NANDF_CS5__SD4_DAT2		0x20d5
-			MX51_PAD_NANDF_CS6__SD4_DAT3		0x20d5
-			MX51_PAD_NANDF_D0__GPIO4_8		0x100
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x2004
-			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x2004
-			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x2004
-			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x2004
-			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
-			MX51_PAD_DISP2_DAT10__FEC_COL		0x0180
-			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x0180
-			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x20a4
-
-			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
-			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x2180
-			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x0085
-			MX51_PAD_DI_GP4__FEC_RDATA2		0x0085
-			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x0085
-			MX51_PAD_DI2_PIN2__FEC_MDC		0x2004
-			MX51_PAD_DI2_PIN3__FEC_MDIO		0x01f5
-			MX51_PAD_DI2_PIN4__FEC_CRS		0x0180
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
-			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX51_PAD_GPIO1_4__GPIO1_4		0x85
-			MX51_PAD_GPIO1_8__GPIO1_8		0xe5
-		>;
-	};
-
-	pinctrl_switch: switchgrp {
-		fsl,pins = <
-			MX51_PAD_AUD3_BB_CK__GPIO4_20		0xc5
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-			MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
-			MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
-			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
-			MX51_PAD_USBH1_DATA0__UART2_CTS		0x1c5
-			MX51_PAD_USBH1_DATA3__UART2_RTS		0x1c5
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-		>;
-	};
-
-	pinctrl_usb_mmc_reset: usbmmcgrp {
-		fsl,pins = <
-			MX51_PAD_AUD3_BB_RXD__GPIO4_19		0x100
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
deleted file mode 100644
index ba92a3ea68728..0000000000000
--- a/arch/arm/boot/dts/imx51.dtsi
+++ /dev/null
@@ -1,663 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include "imx51-pinfunc.h"
-#include <dt-bindings/clock/imx5-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		mmc0 = &esdhc1;
-		mmc1 = &esdhc2;
-		mmc2 = &esdhc3;
-		mmc3 = &esdhc4;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &cspi;
-	};
-
-	tzic: tz-interrupt-controller@e0000000 {
-		compatible = "fsl,imx51-tzic", "fsl,tzic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xe0000000 0x4000>;
-	};
-
-	clocks {
-		ckil {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-
-		ckih1 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		ckih2 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		osc {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0>;
-			clock-latency = <62500>;
-			clocks = <&clks IMX5_CLK_CPU_PODF>;
-			clock-names = "cpu";
-			operating-points = <
-				166000	1000000
-				600000	1050000
-				800000	1100000
-			>;
-			voltage-tolerance = <5>;
-		};
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupt-parent = <&tzic>;
-		interrupts = <77>;
-	};
-
-	usbphy0: usbphy0 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-		clock-names = "main_clk";
-		#phy-cells = <0>;
-	};
-
-	capture-subsystem {
-		compatible = "fsl,imx-capture-subsystem";
-		ports = <&ipu_csi0>, <&ipu_csi1>;
-	};
-
-	display-subsystem {
-		compatible = "fsl,imx-display-subsystem";
-		ports = <&ipu_di0>, <&ipu_di1>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&tzic>;
-		ranges;
-
-		iram: sram@1ffe0000 {
-			compatible = "mmio-sram";
-			reg = <0x1ffe0000 0x20000>;
-			ranges = <0 0x1ffe0000 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-
-		gpu: gpu@30000000 {
-			compatible = "amd,imageon-200.1", "amd,imageon";
-			reg = <0x30000000 0x20000>;
-			reg-names = "kgsl_3d0_reg_memory";
-			interrupts = <12>;
-			interrupt-names = "kgsl_3d0_irq";
-			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
-			clock-names = "core_clk", "mem_iface_clk";
-		};
-
-		ipu: ipu@40000000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,imx51-ipu";
-			reg = <0x40000000 0x20000000>;
-			interrupts = <11 10>;
-			clocks = <&clks IMX5_CLK_IPU_GATE>,
-				 <&clks IMX5_CLK_IPU_DI0_GATE>,
-				 <&clks IMX5_CLK_IPU_DI1_GATE>;
-			clock-names = "bus", "di0", "di1";
-			resets = <&src 2>;
-
-			ipu_csi0: port@0 {
-				reg = <0>;
-			};
-
-			ipu_csi1: port@1 {
-				reg = <1>;
-			};
-
-			ipu_di0: port@2 {
-				reg = <2>;
-
-				ipu_di0_disp1: endpoint {
-				};
-			};
-
-			ipu_di1: port@3 {
-				reg = <3>;
-
-				ipu_di1_disp2: endpoint {
-				};
-			};
-		};
-
-		aips1: bus@70000000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x70000000 0x10000000>;
-			ranges;
-
-			spba-bus@70000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x70000000 0x40000>;
-				ranges;
-
-				esdhc1: mmc@70004000 {
-					compatible = "fsl,imx51-esdhc";
-					reg = <0x70004000 0x4000>;
-					interrupts = <1>;
-					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-						 <&clks IMX5_CLK_DUMMY>,
-						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					status = "disabled";
-				};
-
-				esdhc2: mmc@70008000 {
-					compatible = "fsl,imx51-esdhc";
-					reg = <0x70008000 0x4000>;
-					interrupts = <2>;
-					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-						 <&clks IMX5_CLK_DUMMY>,
-						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				uart3: serial@7000c000 {
-					compatible = "fsl,imx51-uart", "fsl,imx21-uart";
-					reg = <0x7000c000 0x4000>;
-					interrupts = <33>;
-					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-						 <&clks IMX5_CLK_UART3_PER_GATE>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 43 5 1>, <&sdma 44 5 2>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				ecspi1: spi@70010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx51-ecspi";
-					reg = <0x70010000 0x4000>;
-					interrupts = <36>;
-					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ssi2: ssi@70014000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
-					reg = <0x70014000 0x4000>;
-					interrupts = <30>;
-					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
-						 <&clks IMX5_CLK_SSI2_ROOT_GATE>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 24 1 0>,
-					       <&sdma 25 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				esdhc3: mmc@70020000 {
-					compatible = "fsl,imx51-esdhc";
-					reg = <0x70020000 0x4000>;
-					interrupts = <3>;
-					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-						 <&clks IMX5_CLK_DUMMY>,
-						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				esdhc4: mmc@70024000 {
-					compatible = "fsl,imx51-esdhc";
-					reg = <0x70024000 0x4000>;
-					interrupts = <4>;
-					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-						 <&clks IMX5_CLK_DUMMY>,
-						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-			};
-
-			aipstz1: bridge@73f00000 {
-				compatible = "fsl,imx51-aipstz";
-				reg = <0x73f00000 0x60>;
-			};
-
-			usbotg: usb@73f80000 {
-				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
-				reg = <0x73f80000 0x0200>;
-				interrupts = <18>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,usbphy = <&usbphy0>;
-				status = "disabled";
-			};
-
-			usbh1: usb@73f80200 {
-				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
-				reg = <0x73f80200 0x0200>;
-				interrupts = <14>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				fsl,usbmisc = <&usbmisc 1>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			usbh2: usb@73f80400 {
-				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
-				reg = <0x73f80400 0x0200>;
-				interrupts = <16>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				fsl,usbmisc = <&usbmisc 2>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			usbh3: usb@73f80600 {
-				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
-				reg = <0x73f80600 0x0200>;
-				interrupts = <17>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				fsl,usbmisc = <&usbmisc 3>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@73f80800 {
-				#index-cells = <1>;
-				compatible = "fsl,imx51-usbmisc";
-				reg = <0x73f80800 0x200>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-			};
-
-			gpio1: gpio@73f84000 {
-				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
-				reg = <0x73f84000 0x4000>;
-				interrupts = <50 51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@73f88000 {
-				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
-				reg = <0x73f88000 0x4000>;
-				interrupts = <52 53>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@73f8c000 {
-				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
-				reg = <0x73f8c000 0x4000>;
-				interrupts = <54 55>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@73f90000 {
-				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
-				reg = <0x73f90000 0x4000>;
-				interrupts = <56 57>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			kpp: kpp@73f94000 {
-				compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
-				reg = <0x73f94000 0x4000>;
-				interrupts = <60>;
-				clocks = <&clks IMX5_CLK_DUMMY>;
-				status = "disabled";
-			};
-
-			wdog1: watchdog@73f98000 {
-				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
-				reg = <0x73f98000 0x4000>;
-				interrupts = <58>;
-				clocks = <&clks IMX5_CLK_DUMMY>;
-			};
-
-			wdog2: watchdog@73f9c000 {
-				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
-				reg = <0x73f9c000 0x4000>;
-				interrupts = <59>;
-				clocks = <&clks IMX5_CLK_DUMMY>;
-				status = "disabled";
-			};
-
-			gpt: timer@73fa0000 {
-				compatible = "fsl,imx51-gpt", "fsl,imx31-gpt";
-				reg = <0x73fa0000 0x4000>;
-				interrupts = <39>;
-				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-					 <&clks IMX5_CLK_GPT_HF_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			iomuxc: iomuxc@73fa8000 {
-				compatible = "fsl,imx51-iomuxc";
-				reg = <0x73fa8000 0x4000>;
-			};
-
-			pwm1: pwm@73fb4000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
-				reg = <0x73fb4000 0x4000>;
-				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-					 <&clks IMX5_CLK_PWM1_HF_GATE>;
-				clock-names = "ipg", "per";
-				interrupts = <61>;
-			};
-
-			pwm2: pwm@73fb8000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
-				reg = <0x73fb8000 0x4000>;
-				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-					 <&clks IMX5_CLK_PWM2_HF_GATE>;
-				clock-names = "ipg", "per";
-				interrupts = <94>;
-			};
-
-			uart1: serial@73fbc000 {
-				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
-				reg = <0x73fbc000 0x4000>;
-				interrupts = <31>;
-				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-					 <&clks IMX5_CLK_UART1_PER_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 18 4 1>, <&sdma 19 4 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			uart2: serial@73fc0000 {
-				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
-				reg = <0x73fc0000 0x4000>;
-				interrupts = <32>;
-				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-					 <&clks IMX5_CLK_UART2_PER_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 16 4 1>, <&sdma 17 4 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			src: reset-controller@73fd0000 {
-				compatible = "fsl,imx51-src";
-				reg = <0x73fd0000 0x4000>;
-				interrupts = <75>;
-				#reset-cells = <1>;
-			};
-
-			clks: ccm@73fd4000{
-				compatible = "fsl,imx51-ccm";
-				reg = <0x73fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
-				#clock-cells = <1>;
-			};
-		};
-
-		aips2: bus@80000000 {	/* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x10000000>;
-			ranges;
-
-			aipstz2: bridge@83f00000 {
-				compatible = "fsl,imx51-aipstz";
-				reg = <0x83f00000 0x60>;
-			};
-
-			iim: efuse@83f98000 {
-				compatible = "fsl,imx51-iim", "fsl,imx27-iim", "syscon";
-				reg = <0x83f98000 0x4000>;
-				interrupts = <69>;
-				clocks = <&clks IMX5_CLK_IIM_GATE>;
-			};
-
-			tigerp: tigerp@83fa0000 {
-				compatible = "fsl,imx51-tigerp";
-				reg = <0x83fa0000 0x28>;
-			};
-
-			owire: owire@83fa4000 {
-				compatible = "fsl,imx51-owire", "fsl,imx21-owire";
-				reg = <0x83fa4000 0x4000>;
-				interrupts = <88>;
-				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
-				status = "disabled";
-			};
-
-			ecspi2: spi@83fac000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx51-ecspi";
-				reg = <0x83fac000 0x4000>;
-				interrupts = <37>;
-				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			sdma: dma-controller@83fb0000 {
-				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
-				reg = <0x83fb0000 0x4000>;
-				interrupts = <6>;
-				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-					 <&clks IMX5_CLK_AHB>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
-			};
-
-			cspi: spi@83fc0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
-				reg = <0x83fc0000 0x4000>;
-				interrupts = <38>;
-				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c2: i2c@83fc4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
-				reg = <0x83fc4000 0x4000>;
-				interrupts = <63>;
-				clocks = <&clks IMX5_CLK_I2C2_GATE>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@83fc8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
-				reg = <0x83fc8000 0x4000>;
-				interrupts = <62>;
-				clocks = <&clks IMX5_CLK_I2C1_GATE>;
-				status = "disabled";
-			};
-
-			ssi1: ssi@83fcc000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
-				reg = <0x83fcc000 0x4000>;
-				interrupts = <29>;
-				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
-					 <&clks IMX5_CLK_SSI1_ROOT_GATE>;
-				clock-names = "ipg", "baud";
-				dmas = <&sdma 28 0 0>,
-				       <&sdma 29 0 0>;
-				dma-names = "rx", "tx";
-				fsl,fifo-depth = <15>;
-				status = "disabled";
-			};
-
-			audmux: audmux@83fd0000 {
-				compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
-				reg = <0x83fd0000 0x4000>;
-				clocks = <&clks IMX5_CLK_DUMMY>;
-				clock-names = "audmux";
-				status = "disabled";
-			};
-
-			m4if: m4if@83fd8000 {
-				compatible = "fsl,imx51-m4if";
-				reg = <0x83fd8000 0x1000>;
-			};
-
-			weim: weim@83fda000 {
-				#address-cells = <2>;
-				#size-cells = <1>;
-				compatible = "fsl,imx51-weim";
-				reg = <0x83fda000 0x1000>;
-				clocks = <&clks IMX5_CLK_EMI_SLOW_GATE>;
-				ranges = <
-					0 0 0xb0000000 0x08000000
-					1 0 0xb8000000 0x08000000
-					2 0 0xc0000000 0x08000000
-					3 0 0xc8000000 0x04000000
-					4 0 0xcc000000 0x02000000
-					5 0 0xce000000 0x02000000
-				>;
-				status = "disabled";
-			};
-
-			nfc: nand@83fdb000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,imx51-nand";
-				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
-				interrupts = <8>;
-				clocks = <&clks IMX5_CLK_NFC_GATE>;
-				status = "disabled";
-			};
-
-			pata: pata@83fe0000 {
-				compatible = "fsl,imx51-pata", "fsl,imx27-pata";
-				reg = <0x83fe0000 0x4000>;
-				interrupts = <70>;
-				clocks = <&clks IMX5_CLK_PATA_GATE>;
-				status = "disabled";
-			};
-
-			ssi3: ssi@83fe8000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
-				reg = <0x83fe8000 0x4000>;
-				interrupts = <96>;
-				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
-					 <&clks IMX5_CLK_SSI3_ROOT_GATE>;
-				clock-names = "ipg", "baud";
-				dmas = <&sdma 46 0 0>,
-				       <&sdma 47 0 0>;
-				dma-names = "rx", "tx";
-				fsl,fifo-depth = <15>;
-				status = "disabled";
-			};
-
-			fec: ethernet@83fec000 {
-				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
-				reg = <0x83fec000 0x4000>;
-				interrupts = <87>;
-				clocks = <&clks IMX5_CLK_FEC_GATE>,
-					 <&clks IMX5_CLK_FEC_GATE>,
-					 <&clks IMX5_CLK_FEC_GATE>;
-				clock-names = "ipg", "ahb", "ptp";
-				status = "disabled";
-			};
-
-			vpu: vpu@83ff4000 {
-				compatible = "fsl,imx51-vpu", "cnm,codahx4";
-				reg = <0x83ff4000 0x1000>;
-				interrupts = <9>;
-				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
-					 <&clks IMX5_CLK_VPU_GATE>;
-				clock-names = "per", "ahb";
-				resets = <&src 1>;
-				iram = <&iram>;
-			};
-
-			sahara: crypto@83ff8000 {
-				compatible = "fsl,imx53-sahara", "fsl,imx51-sahara";
-				reg = <0x83ff8000 0x4000>;
-				interrupts = <19 20>;
-				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
-					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
-				clock-names = "ipg", "ahb";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
deleted file mode 100644
index 23a7492e29294..0000000000000
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Automotive Reference Design Board";
-	compatible = "fsl,imx53-ard", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x40000000>;
-	};
-
-	eim-cs1@f4000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,eim-bus", "simple-bus";
-		reg = <0xf4000000 0x3ff0000>;
-		ranges;
-
-		ethernet@f4000000 {
-			compatible = "smsc,lan9220", "smsc,lan9115";
-			reg = <0xf4000000 0x2000000>;
-			phy-mode = "mii";
-			interrupt-parent = <&gpio2>;
-			interrupts = <31 0x8>;
-			reg-io-width = <4>;
-			/*
-			 * VDD33A and VDDVARIO of LAN9220 are supplied by
-			 * SW4_3V3 of LTC3589.  Before the regulator driver
-			 * for this PMIC is available, we use a fixed dummy
-			 * 3V3 regulator to get LAN9220 driver probing work.
-			 */
-			vdd33a-supply = <&reg_3p3v>;
-			vddvario-supply = <&reg_3p3v>;
-			smsc,irq-push-pull;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-home {
-			label = "Home";
-			gpios = <&gpio5 10 0>;
-			linux,code = <KEY_HOME>;
-			wakeup-source;
-		};
-
-		key-back {
-			label = "Back";
-			gpios = <&gpio5 11 0>;
-			linux,code = <KEY_BACK>;
-			wakeup-source;
-		};
-
-		key-program {
-			label = "Program";
-			gpios = <&gpio5 12 0>;
-			linux,code = <KEY_PROGRAM >;
-			wakeup-source;
-		};
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio5 13 0>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 0 0>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-ard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_1__GPIO1_1             0x80000000
-				MX53_PAD_GPIO_9__GPIO1_9             0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31           0x80000000
-				MX53_PAD_GPIO_10__GPIO4_0            0x80000000
-				MX53_PAD_DISP0_DAT16__GPIO5_10	     0x80000000
-				MX53_PAD_DISP0_DAT17__GPIO5_11       0x80000000
-				MX53_PAD_DISP0_DAT18__GPIO5_12       0x80000000
-				MX53_PAD_DISP0_DAT19__GPIO5_13       0x80000000
-				MX53_PAD_EIM_D16__EMI_WEIM_D_16      0x80000000
-				MX53_PAD_EIM_D17__EMI_WEIM_D_17      0x80000000
-				MX53_PAD_EIM_D18__EMI_WEIM_D_18      0x80000000
-				MX53_PAD_EIM_D19__EMI_WEIM_D_19      0x80000000
-				MX53_PAD_EIM_D20__EMI_WEIM_D_20      0x80000000
-				MX53_PAD_EIM_D21__EMI_WEIM_D_21      0x80000000
-				MX53_PAD_EIM_D22__EMI_WEIM_D_22      0x80000000
-				MX53_PAD_EIM_D23__EMI_WEIM_D_23      0x80000000
-				MX53_PAD_EIM_D24__EMI_WEIM_D_24      0x80000000
-				MX53_PAD_EIM_D25__EMI_WEIM_D_25      0x80000000
-				MX53_PAD_EIM_D26__EMI_WEIM_D_26      0x80000000
-				MX53_PAD_EIM_D27__EMI_WEIM_D_27      0x80000000
-				MX53_PAD_EIM_D28__EMI_WEIM_D_28      0x80000000
-				MX53_PAD_EIM_D29__EMI_WEIM_D_29      0x80000000
-				MX53_PAD_EIM_D30__EMI_WEIM_D_30      0x80000000
-				MX53_PAD_EIM_D31__EMI_WEIM_D_31      0x80000000
-				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000
-				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000
-				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000
-				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000
-				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000
-				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000
-				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000
-				MX53_PAD_EIM_OE__EMI_WEIM_OE	     0x80000000
-				MX53_PAD_EIM_RW__EMI_WEIM_RW	     0x80000000
-				MX53_PAD_EIM_CS1__EMI_WEIM_CS_1	     0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_PATA_DATA8__ESDHC1_DAT4	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC1_DAT5	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC1_DAT6	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC1_DAT7	0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts
deleted file mode 100644
index 055d23a9aee7c..0000000000000
--- a/arch/arm/boot/dts/imx53-cx9020.dts
+++ /dev/null
@@ -1,295 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2017 Beckhoff Automation GmbH & Co. KG
- * based on imx53-qsb.dts
- */
-
-/dts-v1/;
-#include "imx53.dtsi"
-
-/ {
-	model = "Beckhoff CX9020 Embedded PC";
-	compatible = "bhf,cx9020", "fsl,imx53";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	display-0 {
-		#address-cells =<1>;
-		#size-cells = <0>;
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp0>;
-
-		port@0 {
-			reg = <0>;
-
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			display0_out: endpoint {
-				remote-endpoint = <&tfp410_in>;
-			};
-		};
-	};
-
-	dvi-connector {
-		compatible = "dvi-connector";
-		ddc-i2c-bus = <&i2c2>;
-		digital;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	dvi-converter {
-		compatible = "ti,tfp410";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&display0_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-pwr-r {
-			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-pwr-g {
-			gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led-pwr-b {
-			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-sd1-b {
-			linux,default-trigger = "mmc0";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-sd2-b {
-			linux,default-trigger = "mmc1";
-			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulator-3p2v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P2V";
-		regulator-min-microvolt = <3200000>;
-		regulator-max-microvolt = <3200000>;
-		regulator-always-on;
-	};
-
-	reg_usb_vbus: regulator-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&ipu_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,dte-mode;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&vpu {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX53_PAD_GPIO_0__CCM_CLKO               0x1c4
-			MX53_PAD_GPIO_16__I2C3_SDA              0x1c4
-			MX53_PAD_EIM_D22__GPIO3_22              0x1c4
-			MX53_PAD_EIM_D23__GPIO3_23              0x1e4
-			MX53_PAD_EIM_D24__GPIO3_24              0x1e4
-		>;
-	};
-
-	pinctrl_esdhc1: esdhc1grp {
-		fsl,pins = <
-			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			MX53_PAD_GPIO_1__ESDHC1_CD              0x1c4
-			MX53_PAD_EIM_D17__GPIO3_17              0x1e4
-			MX53_PAD_GPIO_3__GPIO1_3                0x1c4
-		>;
-	};
-
-	pinctrl_esdhc2: esdhc2grp {
-		fsl,pins = <
-			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-			MX53_PAD_GPIO_4__ESDHC2_CD              0x1e4
-			MX53_PAD_EIM_D20__GPIO3_20              0x1e4
-			MX53_PAD_GPIO_8__GPIO1_8                0x1c4
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX53_PAD_FEC_MDC__FEC_MDC		0x4
-			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
-			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
-			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
-			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
-			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
-			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
-			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
-			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
-			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
-			MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
-		>;
-	};
-
-	pinctrl_ipu_disp0: ipudisp0grp {
-		fsl,pins = <
-			MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
-			MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
-			MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
-			MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
-			MX53_PAD_DI0_PIN4__IPU_DI0_PIN4		0x5
-			MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
-			MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
-			MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
-			MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
-			MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
-			MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
-			MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
-			MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
-			MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
-			MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
-			MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
-			MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
-			MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
-			MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
-			MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
-			MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
-			MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
-			MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
-			MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
-			MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
-			MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
-			MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
-			MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
-			MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX53_PAD_EIM_D26__UART2_RXD_MUX	0x1e4
-			MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4
-			MX53_PAD_EIM_D28__UART2_RTS 0x1e4
-			MX53_PAD_EIM_D29__UART2_CTS 0x1e4
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx53-kp-ddc.dts b/arch/arm/boot/dts/imx53-kp-ddc.dts
deleted file mode 100644
index 0e7f071fd10e2..0000000000000
--- a/arch/arm/boot/dts/imx53-kp-ddc.dts
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-#include "imx53-kp.dtsi"
-
-/ {
-	model = "K+P imx53 DDC";
-	compatible = "kiebackpeter,imx53-ddc", "fsl,imx53";
-
-	backlight_lcd: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
-		power-supply = <&reg_backlight>;
-		brightness-levels = <0 24 28 32 36
-				     40 44 48 52 56
-				     60 64 68 72 76
-				     80 84 88 92 96 100>;
-		default-brightness-level = <20>;
-	};
-
-	lcd_display: display {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp>;
-
-		port@0 {
-			reg = <0>;
-
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	lcd_panel: lcd-panel {
-		compatible = "koe,tx14d24vm1bpa";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	reg_backlight: regulator-backlight {
-		compatible = "regulator-fixed";
-		regulator-name = "backlight-supply";
-		regulator-min-microvolt = <15000000>;
-		regulator-max-microvolt = <15000000>;
-		regulator-always-on;
-	};
-};
-
-&fec {
-	status = "okay";
-};
-
-&i2c3 {
-	adc@48 {
-		compatible = "ti,ads1015";
-		reg = <0x48>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@4 {
-			reg = <4>;
-			ti,gain = <2>;
-			ti,datarate = <4>;
-		};
-
-		channel@6 {
-			reg = <6>;
-			ti,gain = <2>;
-			ti,datarate = <4>;
-		};
-	};
-
-	gpio-expander2@21 {
-		compatible = "nxp,pcf8574";
-		reg = <0x21>;
-		interrupts = <109>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-};
-
-&iomuxc {
-	imx53-kp-ddc {
-		pinctrl_disp: dispgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK      0x4
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15        0x4
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0       0x4
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1       0x4
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2       0x4
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3       0x4
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4       0x4
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5       0x4
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6       0x4
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7       0x4
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8       0x4
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9       0x4
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10      0x4
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11      0x4
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12      0x4
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13      0x4
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14      0x4
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15      0x4
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16      0x4
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17      0x4
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18      0x4
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19      0x4
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20      0x4
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21      0x4
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22      0x4
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23      0x4
-				MX53_PAD_GPIO_1__PWM2_PWMO 0x4
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&pmic {
-	fsl,mc13xxx-uses-touch;
-};
diff --git a/arch/arm/boot/dts/imx53-kp-hsc.dts b/arch/arm/boot/dts/imx53-kp-hsc.dts
deleted file mode 100644
index 6e3d71baac0fb..0000000000000
--- a/arch/arm/boot/dts/imx53-kp-hsc.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-#include "imx53-kp.dtsi"
-
-/ {
-	model = "K+P imx53 HSC";
-	compatible = "kiebackpeter,imx53-hsc", "fsl,imx53";
-};
-
-&fec {
-	status = "okay";
-
-	fixed-link { /* RMII fixed link to LAN9303 */
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&i2c3 {
-	switch: switch@a {
-		compatible = "smsc,lan9303-i2c";
-		reg = <0xa>;
-		reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-		reset-duration = <400>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 { /* RMII fixed link to master */
-				reg = <0>;
-				label = "cpu";
-				ethernet = <&fec>;
-			};
-
-			port@1 { /* external port 1 */
-				reg = <1>;
-				label = "lan1";
-			};
-
-			port@2 { /* external port 2 */
-				reg = <2>;
-				label = "lan2";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi
deleted file mode 100644
index 4508f34139a06..0000000000000
--- a/arch/arm/boot/dts/imx53-kp.dtsi
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-#include "imx53-tqma53.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	buzzer {
-		compatible = "pwm-beeper";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_buzzer>;
-		pwms = <&pwm1 0 500000>;
-	};
-
-	gpio-buttons {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiobuttons>;
-
-		button-kalt {
-			label = "Kaltstart";
-			linux,code = <KEY_F6>;
-			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		button-pwr {
-			label = "PowerFailInterrupt";
-			linux,code = <KEY_F7>;
-			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-bus {
-			label = "bus";
-			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "off";
-		};
-
-		led-error {
-			label = "error";
-			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "off";
-		};
-
-		led-flash {
-			label = "flash";
-			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	gpio-expander1@22 {
-		compatible = "nxp,pcf8574";
-		reg = <0x22>;
-		interrupts = <109>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kp_common>;
-
-	imx53-kp-common {
-		pinctrl_buzzer: buzzergrp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4
-			>;
-		};
-
-		pinctrl_gpiobuttons: gpiobuttonsgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_RW__GPIO2_26 0x1e4
-				MX53_PAD_EIM_D22__GPIO3_22 0x1e4
-			>;
-		};
-
-		pinctrl_kp_common: kpcommongrp {
-			fsl,pins = <
-				MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
-				MX53_PAD_GPIO_19__GPIO4_5  0x1e4
-				MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4
-				MX53_PAD_PATA_DATA7__GPIO2_7 0xe0
-				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4
-				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4
-				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4
-				MX53_PAD_EIM_D17__GPIO3_17 0x1e4
-				MX53_PAD_EIM_D18__GPIO3_18 0x1e4
-				MX53_PAD_EIM_D21__GPIO3_21 0x1e4
-				MX53_PAD_EIM_D29__GPIO3_29 0x1e4
-				MX53_PAD_EIM_DA11__GPIO3_11 0x1e4
-				MX53_PAD_EIM_DA13__GPIO3_13 0x1e4
-				MX53_PAD_EIM_DA14__GPIO3_14 0x1e4
-				MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4
-				MX53_PAD_SD1_CMD__GPIO1_18 0x1e4
-				MX53_PAD_SD1_CLK__GPIO1_20 0x1e4
-			>;
-		};
-
-		pinctrl_leds: ledgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_EB2__GPIO2_30 0x1d4
-				MX53_PAD_EIM_D28__GPIO3_28 0x1d4
-				MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4
-				MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4
-			>;
-		};
-	};
-};
-
-&pinctrl_uart1 {
-	fsl,pins = <
-		MX53_PAD_EIM_D23__GPIO3_23 0x1e4
-		MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
-		MX53_PAD_EIM_D24__GPIO3_24 0x1e4
-		MX53_PAD_EIM_D25__GPIO3_25 0x1e4
-		MX53_PAD_EIM_D19__GPIO3_19 0x1e4
-		MX53_PAD_EIM_D20__GPIO3_20 0x1e4
-	>;
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
deleted file mode 100644
index fe5e0d308e994..0000000000000
--- a/arch/arm/boot/dts/imx53-m53.dtsi
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "Aries/DENX M53";
-	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p2v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-
-		reg_backlight: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd-supply";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	touchscreen@41 {
-		compatible = "st,stmpe610";
-		reg = <0x41>;
-		id = <0>;
-		blocks = <0x5>;
-		interrupts = <6 0x0>;
-		interrupt-parent = <&gpio7>;
-		irq-trigger = <0x1>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			st,sample-time = <4>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,adc-freq = <1>;
-			st,ave-ctrl = <3>;
-			st,touch-det-delay = <3>;
-			st,settling = <4>;
-			st,fraction-z = <7>;
-			st,i-drive = <1>;
-		};
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	rtc: rtc@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
-				MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
-				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
-				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
-				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
-				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
-				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
-				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
-				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
deleted file mode 100644
index 2bd2432d317ff..0000000000000
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ /dev/null
@@ -1,371 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx53-m53.dtsi"
-
-/ {
-	model = "Aries/DENX M53EVK";
-	compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
-
-	display1: disp1 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		display-timings {
-			800x480p60 {
-				native-mode;
-				clock-frequency = <31500000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <40>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				vback-porch = <33>;
-				vfront-porch = <9>;
-				vsync-len = <3>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 3000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		power-supply = <&reg_backlight>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio>;
-
-		led-user1 {
-			label = "user1";
-			gpios = <&gpio2 8 0>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-user2 {
-			label = "user2";
-			gpios = <&gpio2 9 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usbh1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 2 0>;
-		};
-
-		reg_usb_otg_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 4 0>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx53-m53evk-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-m53evk-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Ext Spk", "LINE_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		pinctrl_usb: usbgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_2__GPIO1_2		0x80000000
-				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_4__GPIO1_4		0x000b0
-			>;
-		};
-
-		led_pin_gpio: led_gpio {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
-				MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
-				MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
-				MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
-				MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
-				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
-				MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
-				MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
-				MX53_PAD_EIM_DA15__IPU_DI1_PIN1		0x5
-				MX53_PAD_EIM_DA11__IPU_DI1_PIN2		0x5
-				MX53_PAD_EIM_DA12__IPU_DI1_PIN3		0x5
-				MX53_PAD_EIM_A25__IPU_DI1_PIN12		0x5
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb>;
-	vbus-supply = <&reg_usbh1_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	vbus-supply = <&reg_usb_otg_vbus>;
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
deleted file mode 100644
index 4d77b6077fc1b..0000000000000
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ /dev/null
@@ -1,517 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx53-m53.dtsi"
-
-/ {
-	model = "MENLO M53 EMBEDDED DEVICE";
-	compatible = "menlo,m53menlo", "fsl,imx53";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pinctrl_power_button>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power button";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pinctrl_power_out>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led-user1 {
-			label = "TestLed601";
-			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-		};
-
-		led-user2 {
-			label = "TestLed602";
-			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-eth {
-			label = "EthLedYe";
-			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "netdev";
-		};
-	};
-
-	lvds-decoder {
-		compatible = "ti,ds90cf364a", "lvds-decoder";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_decoder_in: endpoint {
-					remote-endpoint = <&lvds0_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds_decoder_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
-
-	panel {
-		compatible = "edt,etm0700g0dh6";
-		pinctrl-0 = <&pinctrl_display_gpio>;
-		pinctrl-names = "default";
-		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds_decoder_out>;
-			};
-		};
-	};
-
-	beeper {
-		compatible = "gpio-beeper";
-		pinctrl-0 = <&pinctrl_beeper>;
-		gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 0>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
-			  <&clks IMX5_CLK_CKO1_PODF>,
-			  <&clks IMX5_CLK_CKO1>;
-	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
-	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	spidev@0 {
-		compatible = "menlo,m53cpld";
-		spi-max-frequency = <25000000>;
-		reg = <0>;
-	};
-
-	spidev@1 {
-		compatible = "menlo,m53cpld";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"TestPin_SV2_3", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
-		"", "CPLD_JTAG_TDO", "", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "CPLD_JTAG_TCK", "KBD_intK",
-		"CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
-		"CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
-		"CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"", "", "", "",
-		"CPLD_reset", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&gpio7 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "USB-OTG_OverCurrent", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_edt_ft5x06>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	dac@60 {
-		compatible = "microchip,mcp4725";
-		reg = <0x60>;
-	};
-};
-
-&i2c2 {
-	touchscreen@41 {
-		status = "disabled";
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_19__CCM_CLKO		0x1e4
-				MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x1e4
-				MX53_PAD_CSI0_DAT4__GPIO5_22		0x1e4
-				MX53_PAD_CSI0_DAT5__GPIO5_23		0x1c4
-				MX53_PAD_CSI0_DAT6__GPIO5_24		0x1e4
-				MX53_PAD_CSI0_DAT7__GPIO5_25		0x1e4
-				MX53_PAD_CSI0_DAT8__GPIO5_26		0x1e4
-				MX53_PAD_CSI0_DAT9__GPIO5_27		0x1c4
-				MX53_PAD_CSI0_DAT10__GPIO5_28		0x1e4
-				MX53_PAD_CSI0_DAT11__GPIO5_29		0x1e4
-				MX53_PAD_PATA_DATA11__GPIO2_11		0x1e4
-				MX53_PAD_EIM_D24__GPIO3_24		0x1e4
-				MX53_PAD_EIM_D25__GPIO3_25		0x1e4
-				MX53_PAD_EIM_D29__GPIO3_29		0x1e4
-				MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x1e4
-				MX53_PAD_CSI0_VSYNC__GPIO5_21		0x1e4
-				MX53_PAD_CSI0_DAT18__GPIO6_4		0x1c4
-				MX53_PAD_PATA_DATA8__GPIO2_8		0x1e4
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT15__GPIO6_1		0x1c4
-				MX53_PAD_CSI0_DAT16__GPIO6_2		0x1c4
-			>;
-		};
-
-		pinctrl_beeper: beepergrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT17__GPIO6_3		0x1c4
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x1c4
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x1c4
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x1e4
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x1c4
-			>;
-		};
-
-		pinctrl_display_gpio: display-gpiogrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT12__GPIO5_30		0x1c4 /* Reset */
-				MX53_PAD_CSI0_MCLK__GPIO5_19		0x1e4 /* Int-K */
-				MX53_PAD_CSI0_DAT13__GPIO5_31		0x1c4 /* Int-I */
-
-				MX53_PAD_CSI0_DAT14__GPIO6_0		0x1c4 /* Power down */
-			>;
-		};
-
-		pinctrl_edt_ft5x06: edt-ft5x06grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA9__GPIO2_9		0x1e4 /* Reset */
-				MX53_PAD_CSI0_DAT19__GPIO6_5		0x1c4 /* Interrupt */
-				MX53_PAD_PATA_DATA10__GPIO2_10		0x1e4 /* Wake */
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_CS0__ECSPI2_SCLK		0xe4
-				MX53_PAD_EIM_OE__ECSPI2_MISO		0xe4
-				MX53_PAD_EIM_CS1__ECSPI2_MOSI		0xe4
-				MX53_PAD_EIM_RW__GPIO2_26		0xe4
-				MX53_PAD_EIM_LBA__GPIO2_27		0xe4
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1e4
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1e4
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1e4
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1e4
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1e4
-				MX53_PAD_GPIO_1__GPIO1_1		0x1c4
-				MX53_PAD_GPIO_9__GPIO1_9		0x1e4
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
-				MX53_PAD_PATA_DA_1__GPIO7_7		0x1e4
-				MX53_PAD_EIM_EB3__GPIO2_31		0x1e4
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
-				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
-				MX53_PAD_GPIO_5__I2C3_SCL		0x400001e4
-			>;
-		};
-
-		pinctrl_lvds0: lvds0grp {
-			/* LVDS pins only have pin mux configuration */
-			fsl,pins = <
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
-			>;
-		};
-
-		pinctrl_power_button: powerbutgrp {
-			fsl,pins = <
-				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
-			>;
-		};
-
-		pinctrl_power_out: poweroutgrp {
-			fsl,pins = <
-				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-				MX53_PAD_PATA_IORDY__UART1_RTS		0x1e4
-				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DIOR__UART2_RTS		0x1e4
-				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-
-		pinctrl_usb: usbgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_2__GPIO1_2		0x1c4
-				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1c4
-				MX53_PAD_GPIO_4__GPIO1_4		0x1c4
-				MX53_PAD_GPIO_18__GPIO7_13		0x1c4
-			>;
-		};
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds0>;
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		reg = <0>;
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@2 {
-			reg = <2>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&lvds_decoder_in>;
-			};
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb>;
-	vbus-supply = <&reg_usbh1_vbus>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
deleted file mode 100644
index 09eee0dd44c12..0000000000000
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include "imx53-tqma53.dtsi"
-
-/ {
-	model = "TQ MBa53 starter kit";
-	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
-		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
-		default-brightness-level = <10>;
-		enable-gpios = <&gpio7 7 0>;
-		power-supply = <&reg_backlight>;
-	};
-
-	disp1: disp1 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp1_1>;
-		interface-pix-fmt = "rgb24";
-		status = "disabled";
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_backlight: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "lcd-supply";
-			gpio = <&gpio2 5 0>;
-			startup-delay-us = <5000>;
-		};
-
-		reg_3p2v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "tq,imx53-mba53-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-mba53-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds1_1>;
-	status = "disabled";
-};
-
-&iomuxc {
-	lvds1 {
-		pinctrl_lvds1_1: lvds1-grp1 {
-			fsl,pins = <
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_lvds1_2: lvds1-grp2 {
-			fsl,pins = <
-				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
-				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
-				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
-				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
-				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
-			>;
-		};
-	};
-
-	disp1 {
-		pinctrl_disp1_1: disp1-grp1 {
-			fsl,pins = <
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15   0x80000000 /* DISP1_DRDY */
-				MX53_PAD_EIM_D23__IPU_DI1_PIN2     0x80000000 /* DISP1_HSYNC */
-				MX53_PAD_EIM_EB3__IPU_DI1_PIN3     0x80000000 /* DISP1_VSYNC */
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9  0x80000000
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8  0x80000000
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7  0x80000000
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6  0x80000000
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5  0x80000000
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4  0x80000000
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3  0x80000000
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2  0x80000000
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1  0x80000000
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0  0x80000000
-			>;
-		};
-	};
-
-	tve {
-		pinctrl_vga_sync_1: vgasync-grp1 {
-			fsl,pins = <
-				/* VGA_VSYNC, HSYNC with max drive strength */
-				MX53_PAD_EIM_CS1__IPU_DI1_PIN6	   0xe6
-				MX53_PAD_EIM_DA15__IPU_DI1_PIN4	   0xe6
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&cspi {
-	status = "okay";
-};
-
-&audmux {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-};
-
-&i2c2 {
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-	};
-
-	expander: pca9554@20 {
-		compatible = "pca9554";
-		reg = <0x20>;
-		interrupts = <109>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	sensor2: lm75@49 {
-		compatible = "lm75";
-		reg = <0x49>;
-	};
-};
-
-&fec {
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&esdhc2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&ecspi1 {
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&tve {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_vga_sync_1>;
-	ddc-i2c-bus = <&i2c3>;
-	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <4>;
-	fsl,vsync-pin = <6>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-pinfunc.h b/arch/arm/boot/dts/imx53-pinfunc.h
deleted file mode 100644
index 67bd06610fdff..0000000000000
--- a/arch/arm/boot/dts/imx53-pinfunc.h
+++ /dev/null
@@ -1,1189 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DTS_IMX53_PINFUNC_H
-#define __DTS_IMX53_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX53_PAD_GPIO_19__KPP_COL_5				0x020 0x348 0x840 0x0 0x0
-#define MX53_PAD_GPIO_19__GPIO4_5				0x020 0x348 0x000 0x1 0x0
-#define MX53_PAD_GPIO_19__CCM_CLKO				0x020 0x348 0x000 0x2 0x0
-#define MX53_PAD_GPIO_19__SPDIF_OUT1				0x020 0x348 0x000 0x3 0x0
-#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2			0x020 0x348 0x000 0x4 0x0
-#define MX53_PAD_GPIO_19__ECSPI1_RDY				0x020 0x348 0x000 0x5 0x0
-#define MX53_PAD_GPIO_19__FEC_TDATA_3				0x020 0x348 0x000 0x6 0x0
-#define MX53_PAD_GPIO_19__SRC_INT_BOOT				0x020 0x348 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL0__KPP_COL_0				0x024 0x34c 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL0__GPIO4_6				0x024 0x34c 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC			0x024 0x34c 0x758 0x2 0x0
-#define MX53_PAD_KEY_COL0__UART4_TXD_MUX			0x024 0x34c 0x000 0x4 0x0
-#define MX53_PAD_KEY_COL0__ECSPI1_SCLK				0x024 0x34c 0x79c 0x5 0x0
-#define MX53_PAD_KEY_COL0__FEC_RDATA_3				0x024 0x34c 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST			0x024 0x34c 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW0__KPP_ROW_0				0x028 0x350 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW0__GPIO4_7				0x028 0x350 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD			0x028 0x350 0x74c 0x2 0x0
-#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX			0x028 0x350 0x890 0x4 0x1
-#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI				0x028 0x350 0x7a4 0x5 0x0
-#define MX53_PAD_KEY_ROW0__FEC_TX_ER				0x028 0x350 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL1__KPP_COL_1				0x02c 0x354 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL1__GPIO4_8				0x02c 0x354 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS			0x02c 0x354 0x75c 0x2 0x0
-#define MX53_PAD_KEY_COL1__UART5_TXD_MUX			0x02c 0x354 0x000 0x4 0x0
-#define MX53_PAD_KEY_COL1__ECSPI1_MISO				0x02c 0x354 0x7a0 0x5 0x0
-#define MX53_PAD_KEY_COL1__FEC_RX_CLK				0x02c 0x354 0x808 0x6 0x0
-#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY			0x02c 0x354 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW1__KPP_ROW_1				0x030 0x358 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW1__GPIO4_9				0x030 0x358 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD			0x030 0x358 0x748 0x2 0x0
-#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX			0x030 0x358 0x898 0x4 0x1
-#define MX53_PAD_KEY_ROW1__ECSPI1_SS0				0x030 0x358 0x7a8 0x5 0x0
-#define MX53_PAD_KEY_ROW1__FEC_COL				0x030 0x358 0x800 0x6 0x0
-#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID			0x030 0x358 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL2__KPP_COL_2				0x034 0x35c 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL2__GPIO4_10				0x034 0x35c 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL2__CAN1_TXCAN				0x034 0x35c 0x000 0x2 0x0
-#define MX53_PAD_KEY_COL2__FEC_MDIO				0x034 0x35c 0x804 0x4 0x0
-#define MX53_PAD_KEY_COL2__ECSPI1_SS1				0x034 0x35c 0x7ac 0x5 0x0
-#define MX53_PAD_KEY_COL2__FEC_RDATA_2				0x034 0x35c 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE			0x034 0x35c 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW2__KPP_ROW_2				0x038 0x360 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW2__GPIO4_11				0x038 0x360 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW2__CAN1_RXCAN				0x038 0x360 0x760 0x2 0x0
-#define MX53_PAD_KEY_ROW2__FEC_MDC				0x038 0x360 0x000 0x4 0x0
-#define MX53_PAD_KEY_ROW2__ECSPI1_SS2				0x038 0x360 0x7b0 0x5 0x0
-#define MX53_PAD_KEY_ROW2__FEC_TDATA_2				0x038 0x360 0x000 0x6 0x0
-#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR			0x038 0x360 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL3__KPP_COL_3				0x03c 0x364 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL3__GPIO4_12				0x03c 0x364 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL3__USBOH3_H2_DP				0x03c 0x364 0x000 0x2 0x0
-#define MX53_PAD_KEY_COL3__SPDIF_IN1				0x03c 0x364 0x870 0x3 0x0
-#define MX53_PAD_KEY_COL3__I2C2_SCL				0x03c 0x364 0x81c 0x4 0x0
-#define MX53_PAD_KEY_COL3__ECSPI1_SS3				0x03c 0x364 0x7b4 0x5 0x0
-#define MX53_PAD_KEY_COL3__FEC_CRS				0x03c 0x364 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK			0x03c 0x364 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW3__KPP_ROW_3				0x040 0x368 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW3__GPIO4_13				0x040 0x368 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM				0x040 0x368 0x000 0x2 0x0
-#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK			0x040 0x368 0x768 0x3 0x0
-#define MX53_PAD_KEY_ROW3__I2C2_SDA				0x040 0x368 0x820 0x4 0x0
-#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT			0x040 0x368 0x000 0x5 0x0
-#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP				0x040 0x368 0x77c 0x6 0x0
-#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0			0x040 0x368 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL4__KPP_COL_4				0x044 0x36c 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL4__GPIO4_14				0x044 0x36c 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL4__CAN2_TXCAN				0x044 0x36c 0x000 0x2 0x0
-#define MX53_PAD_KEY_COL4__IPU_SISG_4				0x044 0x36c 0x000 0x3 0x0
-#define MX53_PAD_KEY_COL4__UART5_RTS				0x044 0x36c 0x894 0x4 0x0
-#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC			0x044 0x36c 0x89c 0x5 0x0
-#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1			0x044 0x36c 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW4__KPP_ROW_4				0x048 0x370 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW4__GPIO4_15				0x048 0x370 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW4__CAN2_RXCAN				0x048 0x370 0x764 0x2 0x0
-#define MX53_PAD_KEY_ROW4__IPU_SISG_5				0x048 0x370 0x000 0x3 0x0
-#define MX53_PAD_KEY_ROW4__UART5_CTS				0x048 0x370 0x000 0x4 0x0
-#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR			0x048 0x370 0x000 0x5 0x0
-#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID			0x048 0x370 0x000 0x7 0x0
-#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK			0x04c 0x378 0x000 0x0 0x0
-#define MX53_PAD_DI0_DISP_CLK__GPIO4_16				0x04c 0x378 0x000 0x1 0x0
-#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR			0x04c 0x378 0x000 0x2 0x0
-#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0		0x04c 0x378 0x000 0x5 0x0
-#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0			0x04c 0x378 0x000 0x6 0x0
-#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID			0x04c 0x378 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15			0x050 0x37c 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN15__GPIO4_17				0x050 0x37c 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC			0x050 0x37c 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1		0x050 0x37c 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1			0x050 0x37c 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID			0x050 0x37c 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2				0x054 0x380 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN2__GPIO4_18				0x054 0x380 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD			0x054 0x380 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2		0x054 0x380 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2			0x054 0x380 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION			0x054 0x380 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3				0x058 0x384 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN3__GPIO4_19				0x058 0x384 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS			0x058 0x384 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3		0x058 0x384 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3			0x058 0x384 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG			0x058 0x384 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4				0x05c 0x388 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN4__GPIO4_20				0x05c 0x388 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD			0x05c 0x388 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN4__ESDHC1_WP				0x05c 0x388 0x7fc 0x3 0x0
-#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD			0x05c 0x388 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4			0x05c 0x388 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT		0x05c 0x388 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0			0x060 0x38c 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT0__GPIO4_21				0x060 0x38c 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT0__CSPI_SCLK				0x060 0x38c 0x780 0x2 0x0
-#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0		0x060 0x38c 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN		0x060 0x38c 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5			0x060 0x38c 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY			0x060 0x38c 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1			0x064 0x390 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT1__GPIO4_22				0x064 0x390 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT1__CSPI_MOSI				0x064 0x390 0x788 0x2 0x0
-#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1		0x064 0x390 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL	0x064 0x390 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6			0x064 0x390 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID			0x064 0x390 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2			0x068 0x394 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT2__GPIO4_23				0x068 0x394 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT2__CSPI_MISO				0x068 0x394 0x784 0x2 0x0
-#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2		0x068 0x394 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE			0x068 0x394 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7			0x068 0x394 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE			0x068 0x394 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3			0x06c 0x398 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT3__GPIO4_24				0x06c 0x398 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT3__CSPI_SS0				0x06c 0x398 0x78c 0x2 0x0
-#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3		0x06c 0x398 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR		0x06c 0x398 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8			0x06c 0x398 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR			0x06c 0x398 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4			0x070 0x39c 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT4__GPIO4_25				0x070 0x39c 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT4__CSPI_SS1				0x070 0x39c 0x790 0x2 0x0
-#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4		0x070 0x39c 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB			0x070 0x39c 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9			0x070 0x39c 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK			0x070 0x39c 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5			0x074 0x3a0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT5__GPIO4_26				0x074 0x3a0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT5__CSPI_SS2				0x074 0x3a0 0x794 0x2 0x0
-#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5		0x074 0x3a0 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS		0x074 0x3a0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10			0x074 0x3a0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0		0x074 0x3a0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6			0x078 0x3a4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT6__GPIO4_27				0x078 0x3a4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT6__CSPI_SS3				0x078 0x3a4 0x798 0x2 0x0
-#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6		0x078 0x3a4 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE		0x078 0x3a4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11			0x078 0x3a4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1		0x078 0x3a4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7			0x07c 0x3a8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT7__GPIO4_28				0x07c 0x3a8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT7__CSPI_RDY				0x07c 0x3a8 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7		0x07c 0x3a8 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0		0x07c 0x3a8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12			0x07c 0x3a8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID			0x07c 0x3a8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8			0x080 0x3ac 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT8__GPIO4_29				0x080 0x3ac 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT8__PWM1_PWMO				0x080 0x3ac 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B			0x080 0x3ac 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1		0x080 0x3ac 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13			0x080 0x3ac 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID			0x080 0x3ac 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9			0x084 0x3b0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT9__GPIO4_30				0x084 0x3b0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT9__PWM2_PWMO				0x084 0x3b0 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B			0x084 0x3b0 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2		0x084 0x3b0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14			0x084 0x3b0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0			0x084 0x3b0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10			0x088 0x3b4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT10__GPIO4_31				0x088 0x3b4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP			0x088 0x3b4 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3	0x088 0x3b4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15			0x088 0x3b4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1			0x088 0x3b4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11			0x08c 0x3b8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT11__GPIO5_5				0x08c 0x3b8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT			0x08c 0x3b8 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4	0x08c 0x3b8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16			0x08c 0x3b8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2			0x08c 0x3b8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12			0x090 0x3bc 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT12__GPIO5_6				0x090 0x3bc 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK			0x090 0x3bc 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5	0x090 0x3bc 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17			0x090 0x3bc 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3			0x090 0x3bc 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13			0x094 0x3c0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT13__GPIO5_7				0x094 0x3c0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS			0x094 0x3c0 0x754 0x3 0x0
-#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0	0x094 0x3c0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18			0x094 0x3c0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4			0x094 0x3c0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14			0x098 0x3c4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT14__GPIO5_8				0x098 0x3c4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC			0x098 0x3c4 0x750 0x3 0x0
-#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1	0x098 0x3c4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19			0x098 0x3c4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5			0x098 0x3c4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15			0x09c 0x3c8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT15__GPIO5_9				0x09c 0x3c8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1			0x09c 0x3c8 0x7ac 0x2 0x1
-#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1			0x09c 0x3c8 0x7c8 0x3 0x0
-#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2	0x09c 0x3c8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20			0x09c 0x3c8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6			0x09c 0x3c8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16			0x0a0 0x3cc 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT16__GPIO5_10				0x0a0 0x3cc 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI			0x0a0 0x3cc 0x7c0 0x2 0x0
-#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC			0x0a0 0x3cc 0x758 0x3 0x1
-#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0			0x0a0 0x3cc 0x868 0x4 0x0
-#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3	0x0a0 0x3cc 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21			0x0a0 0x3cc 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7			0x0a0 0x3cc 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17			0x0a4 0x3d0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT17__GPIO5_11				0x0a4 0x3d0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO			0x0a4 0x3d0 0x7bc 0x2 0x0
-#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD			0x0a4 0x3d0 0x74c 0x3 0x1
-#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1			0x0a4 0x3d0 0x86c 0x4 0x0
-#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4	0x0a4 0x3d0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22			0x0a4 0x3d0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18			0x0a8 0x3d4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT18__GPIO5_12				0x0a8 0x3d4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0			0x0a8 0x3d4 0x7c4 0x2 0x0
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS			0x0a8 0x3d4 0x75c 0x3 0x1
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS			0x0a8 0x3d4 0x73c 0x4 0x0
-#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5	0x0a8 0x3d4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23			0x0a8 0x3d4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2			0x0a8 0x3d4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19			0x0ac 0x3d8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT19__GPIO5_13				0x0ac 0x3d8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK			0x0ac 0x3d8 0x7b8 0x2 0x0
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD			0x0ac 0x3d8 0x748 0x3 0x1
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC			0x0ac 0x3d8 0x738 0x4 0x0
-#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6	0x0ac 0x3d8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24			0x0ac 0x3d8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3			0x0ac 0x3d8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20			0x0b0 0x3dc 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT20__GPIO5_14				0x0b0 0x3dc 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK			0x0b0 0x3dc 0x79c 0x2 0x1
-#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC			0x0b0 0x3dc 0x740 0x3 0x0
-#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7	0x0b0 0x3dc 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25			0x0b0 0x3dc 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI			0x0b0 0x3dc 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21			0x0b4 0x3e0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT21__GPIO5_15				0x0b4 0x3e0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI			0x0b4 0x3e0 0x7a4 0x2 0x1
-#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD			0x0b4 0x3e0 0x734 0x3 0x0
-#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0		0x0b4 0x3e0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26			0x0b4 0x3e0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO			0x0b4 0x3e0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22			0x0b8 0x3e4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT22__GPIO5_16				0x0b8 0x3e4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO			0x0b8 0x3e4 0x7a0 0x2 0x1
-#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS			0x0b8 0x3e4 0x744 0x3 0x0
-#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1		0x0b8 0x3e4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27			0x0b8 0x3e4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK			0x0b8 0x3e4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23			0x0bc 0x3e8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT23__GPIO5_17				0x0bc 0x3e8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0			0x0bc 0x3e8 0x7a8 0x2 0x1
-#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD			0x0bc 0x3e8 0x730 0x3 0x0
-#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2		0x0bc 0x3e8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28			0x0bc 0x3e8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS			0x0bc 0x3e8 0x000 0x7 0x0
-#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK			0x0c0 0x3ec 0x000 0x0 0x0
-#define MX53_PAD_CSI0_PIXCLK__GPIO5_18				0x0c0 0x3ec 0x000 0x1 0x0
-#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0			0x0c0 0x3ec 0x000 0x5 0x0
-#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29			0x0c0 0x3ec 0x000 0x6 0x0
-#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC			0x0c4 0x3f0 0x000 0x0 0x0
-#define MX53_PAD_CSI0_MCLK__GPIO5_19				0x0c4 0x3f0 0x000 0x1 0x0
-#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK			0x0c4 0x3f0 0x000 0x2 0x0
-#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1			0x0c4 0x3f0 0x000 0x5 0x0
-#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30			0x0c4 0x3f0 0x000 0x6 0x0
-#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL				0x0c4 0x3f0 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN			0x0c8 0x3f4 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DATA_EN__GPIO5_20				0x0c8 0x3f4 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2			0x0c8 0x3f4 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31			0x0c8 0x3f4 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK			0x0c8 0x3f4 0x000 0x7 0x0
-#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC			0x0cc 0x3f8 0x000 0x0 0x0
-#define MX53_PAD_CSI0_VSYNC__GPIO5_21				0x0cc 0x3f8 0x000 0x1 0x0
-#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3			0x0cc 0x3f8 0x000 0x5 0x0
-#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32			0x0cc 0x3f8 0x000 0x6 0x0
-#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0			0x0cc 0x3f8 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4			0x0d0 0x3fc 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT4__GPIO5_22				0x0d0 0x3fc 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT4__KPP_COL_5				0x0d0 0x3fc 0x840 0x2 0x1
-#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK				0x0d0 0x3fc 0x79c 0x3 0x2
-#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP			0x0d0 0x3fc 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC			0x0d0 0x3fc 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33			0x0d0 0x3fc 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1			0x0d0 0x3fc 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5			0x0d4 0x400 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT5__GPIO5_23				0x0d4 0x400 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT5__KPP_ROW_5				0x0d4 0x400 0x84c 0x2 0x0
-#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI				0x0d4 0x400 0x7a4 0x3 0x2
-#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT			0x0d4 0x400 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD			0x0d4 0x400 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34			0x0d4 0x400 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2			0x0d4 0x400 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6			0x0d8 0x404 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT6__GPIO5_24				0x0d8 0x404 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT6__KPP_COL_6				0x0d8 0x404 0x844 0x2 0x0
-#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO				0x0d8 0x404 0x7a0 0x3 0x2
-#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK			0x0d8 0x404 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS			0x0d8 0x404 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35			0x0d8 0x404 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3			0x0d8 0x404 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7			0x0dc 0x408 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT7__GPIO5_25				0x0dc 0x408 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT7__KPP_ROW_6				0x0dc 0x408 0x850 0x2 0x0
-#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0				0x0dc 0x408 0x7a8 0x3 0x2
-#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR			0x0dc 0x408 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD			0x0dc 0x408 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36			0x0dc 0x408 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4			0x0dc 0x408 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8			0x0e0 0x40c 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT8__GPIO5_26				0x0e0 0x40c 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT8__KPP_COL_7				0x0e0 0x40c 0x848 0x2 0x0
-#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK				0x0e0 0x40c 0x7b8 0x3 0x1
-#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC			0x0e0 0x40c 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA				0x0e0 0x40c 0x818 0x5 0x0
-#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37			0x0e0 0x40c 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5			0x0e0 0x40c 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9			0x0e4 0x410 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT9__GPIO5_27				0x0e4 0x410 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT9__KPP_ROW_7				0x0e4 0x410 0x854 0x2 0x0
-#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI				0x0e4 0x410 0x7c0 0x3 0x1
-#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR			0x0e4 0x410 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL				0x0e4 0x410 0x814 0x5 0x0
-#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38			0x0e4 0x410 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6			0x0e4 0x410 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10			0x0e8 0x414 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT10__GPIO5_28				0x0e8 0x414 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX			0x0e8 0x414 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO			0x0e8 0x414 0x7bc 0x3 0x1
-#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC			0x0e8 0x414 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4			0x0e8 0x414 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39			0x0e8 0x414 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7			0x0e8 0x414 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11			0x0ec 0x418 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT11__GPIO5_29				0x0ec 0x418 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX			0x0ec 0x418 0x878 0x2 0x1
-#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0				0x0ec 0x418 0x7c4 0x3 0x1
-#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS			0x0ec 0x418 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5			0x0ec 0x418 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40			0x0ec 0x418 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8			0x0ec 0x418 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12			0x0f0 0x41c 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT12__GPIO5_30				0x0f0 0x41c 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX			0x0f0 0x41c 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0		0x0f0 0x41c 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6			0x0f0 0x41c 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41			0x0f0 0x41c 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9			0x0f0 0x41c 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13			0x0f4 0x420 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT13__GPIO5_31				0x0f4 0x420 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX			0x0f4 0x420 0x890 0x2 0x3
-#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1		0x0f4 0x420 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7			0x0f4 0x420 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42			0x0f4 0x420 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10			0x0f4 0x420 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14			0x0f8 0x424 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT14__GPIO6_0				0x0f8 0x424 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX			0x0f8 0x424 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2		0x0f8 0x424 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8			0x0f8 0x424 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43			0x0f8 0x424 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11			0x0f8 0x424 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15			0x0fc 0x428 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT15__GPIO6_1				0x0fc 0x428 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX			0x0fc 0x428 0x898 0x2 0x3
-#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3		0x0fc 0x428 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9			0x0fc 0x428 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44			0x0fc 0x428 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12			0x0fc 0x428 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16			0x100 0x42c 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT16__GPIO6_2				0x100 0x42c 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT16__UART4_RTS				0x100 0x42c 0x88c 0x2 0x0
-#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4		0x100 0x42c 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10			0x100 0x42c 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45			0x100 0x42c 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13			0x100 0x42c 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17			0x104 0x430 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT17__GPIO6_3				0x104 0x430 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT17__UART4_CTS				0x104 0x430 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5		0x104 0x430 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11			0x104 0x430 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46			0x104 0x430 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14			0x104 0x430 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18			0x108 0x434 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT18__GPIO6_4				0x108 0x434 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT18__UART5_RTS				0x108 0x434 0x894 0x2 0x2
-#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6		0x108 0x434 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12			0x108 0x434 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47			0x108 0x434 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15			0x108 0x434 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19			0x10c 0x438 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT19__GPIO6_5				0x10c 0x438 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT19__UART5_CTS				0x10c 0x438 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7		0x10c 0x438 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13			0x10c 0x438 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48			0x10c 0x438 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK			0x10c 0x438 0x000 0x7 0x0
-#define MX53_PAD_EIM_A25__EMI_WEIM_A_25				0x110 0x458 0x000 0x0 0x0
-#define MX53_PAD_EIM_A25__GPIO5_2				0x110 0x458 0x000 0x1 0x0
-#define MX53_PAD_EIM_A25__ECSPI2_RDY				0x110 0x458 0x000 0x2 0x0
-#define MX53_PAD_EIM_A25__IPU_DI1_PIN12				0x110 0x458 0x000 0x3 0x0
-#define MX53_PAD_EIM_A25__CSPI_SS1				0x110 0x458 0x790 0x4 0x1
-#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS				0x110 0x458 0x000 0x6 0x0
-#define MX53_PAD_EIM_A25__USBPHY1_BISTOK			0x110 0x458 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2				0x114 0x45c 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB2__GPIO2_30				0x114 0x45c 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK			0x114 0x45c 0x76c 0x2 0x0
-#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS			0x114 0x45c 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB2__ECSPI1_SS0				0x114 0x45c 0x7a8 0x4 0x3
-#define MX53_PAD_EIM_EB2__I2C2_SCL				0x114 0x45c 0x81c 0x5 0x1
-#define MX53_PAD_EIM_D16__EMI_WEIM_D_16				0x118 0x460 0x000 0x0 0x0
-#define MX53_PAD_EIM_D16__GPIO3_16				0x118 0x460 0x000 0x1 0x0
-#define MX53_PAD_EIM_D16__IPU_DI0_PIN5				0x118 0x460 0x000 0x2 0x0
-#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK			0x118 0x460 0x000 0x3 0x0
-#define MX53_PAD_EIM_D16__ECSPI1_SCLK				0x118 0x460 0x79c 0x4 0x3
-#define MX53_PAD_EIM_D16__I2C2_SDA				0x118 0x460 0x820 0x5 0x1
-#define MX53_PAD_EIM_D17__EMI_WEIM_D_17				0x11c 0x464 0x000 0x0 0x0
-#define MX53_PAD_EIM_D17__GPIO3_17				0x11c 0x464 0x000 0x1 0x0
-#define MX53_PAD_EIM_D17__IPU_DI0_PIN6				0x11c 0x464 0x000 0x2 0x0
-#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN			0x11c 0x464 0x830 0x3 0x0
-#define MX53_PAD_EIM_D17__ECSPI1_MISO				0x11c 0x464 0x7a0 0x4 0x3
-#define MX53_PAD_EIM_D17__I2C3_SCL				0x11c 0x464 0x824 0x5 0x0
-#define MX53_PAD_EIM_D18__EMI_WEIM_D_18				0x120 0x468 0x000 0x0 0x0
-#define MX53_PAD_EIM_D18__GPIO3_18				0x120 0x468 0x000 0x1 0x0
-#define MX53_PAD_EIM_D18__IPU_DI0_PIN7				0x120 0x468 0x000 0x2 0x0
-#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO			0x120 0x468 0x830 0x3 0x1
-#define MX53_PAD_EIM_D18__ECSPI1_MOSI				0x120 0x468 0x7a4 0x4 0x3
-#define MX53_PAD_EIM_D18__I2C3_SDA				0x120 0x468 0x828 0x5 0x0
-#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS				0x120 0x468 0x000 0x6 0x0
-#define MX53_PAD_EIM_D19__EMI_WEIM_D_19				0x124 0x46c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D19__GPIO3_19				0x124 0x46c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D19__IPU_DI0_PIN8				0x124 0x46c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS			0x124 0x46c 0x000 0x3 0x0
-#define MX53_PAD_EIM_D19__ECSPI1_SS1				0x124 0x46c 0x7ac 0x4 0x2
-#define MX53_PAD_EIM_D19__EPIT1_EPITO				0x124 0x46c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D19__UART1_CTS				0x124 0x46c 0x000 0x6 0x0
-#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC			0x124 0x46c 0x8a4 0x7 0x0
-#define MX53_PAD_EIM_D20__EMI_WEIM_D_20				0x128 0x470 0x000 0x0 0x0
-#define MX53_PAD_EIM_D20__GPIO3_20				0x128 0x470 0x000 0x1 0x0
-#define MX53_PAD_EIM_D20__IPU_DI0_PIN16				0x128 0x470 0x000 0x2 0x0
-#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS			0x128 0x470 0x000 0x3 0x0
-#define MX53_PAD_EIM_D20__CSPI_SS0				0x128 0x470 0x78c 0x4 0x1
-#define MX53_PAD_EIM_D20__EPIT2_EPITO				0x128 0x470 0x000 0x5 0x0
-#define MX53_PAD_EIM_D20__UART1_RTS				0x128 0x470 0x874 0x6 0x1
-#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR			0x128 0x470 0x000 0x7 0x0
-#define MX53_PAD_EIM_D21__EMI_WEIM_D_21				0x12c 0x474 0x000 0x0 0x0
-#define MX53_PAD_EIM_D21__GPIO3_21				0x12c 0x474 0x000 0x1 0x0
-#define MX53_PAD_EIM_D21__IPU_DI0_PIN17				0x12c 0x474 0x000 0x2 0x0
-#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK			0x12c 0x474 0x000 0x3 0x0
-#define MX53_PAD_EIM_D21__CSPI_SCLK				0x12c 0x474 0x780 0x4 0x1
-#define MX53_PAD_EIM_D21__I2C1_SCL				0x12c 0x474 0x814 0x5 0x1
-#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC			0x12c 0x474 0x89c 0x6 0x1
-#define MX53_PAD_EIM_D22__EMI_WEIM_D_22				0x130 0x478 0x000 0x0 0x0
-#define MX53_PAD_EIM_D22__GPIO3_22				0x130 0x478 0x000 0x1 0x0
-#define MX53_PAD_EIM_D22__IPU_DI0_PIN1				0x130 0x478 0x000 0x2 0x0
-#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN			0x130 0x478 0x82c 0x3 0x0
-#define MX53_PAD_EIM_D22__CSPI_MISO				0x130 0x478 0x784 0x4 0x1
-#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR			0x130 0x478 0x000 0x6 0x0
-#define MX53_PAD_EIM_D23__EMI_WEIM_D_23				0x134 0x47c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D23__GPIO3_23				0x134 0x47c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D23__UART3_CTS				0x134 0x47c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D23__UART1_DCD				0x134 0x47c 0x000 0x3 0x0
-#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS				0x134 0x47c 0x000 0x4 0x0
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN2				0x134 0x47c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN			0x134 0x47c 0x834 0x6 0x0
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN14				0x134 0x47c 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3				0x138 0x480 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB3__GPIO2_31				0x138 0x480 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB3__UART3_RTS				0x138 0x480 0x884 0x2 0x1
-#define MX53_PAD_EIM_EB3__UART1_RI				0x138 0x480 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3				0x138 0x480 0x000 0x5 0x0
-#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC			0x138 0x480 0x838 0x6 0x0
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16				0x138 0x480 0x000 0x7 0x0
-#define MX53_PAD_EIM_D24__EMI_WEIM_D_24				0x13c 0x484 0x000 0x0 0x0
-#define MX53_PAD_EIM_D24__GPIO3_24				0x13c 0x484 0x000 0x1 0x0
-#define MX53_PAD_EIM_D24__UART3_TXD_MUX				0x13c 0x484 0x000 0x2 0x0
-#define MX53_PAD_EIM_D24__ECSPI1_SS2				0x13c 0x484 0x7b0 0x3 0x1
-#define MX53_PAD_EIM_D24__CSPI_SS2				0x13c 0x484 0x794 0x4 0x1
-#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS			0x13c 0x484 0x754 0x5 0x1
-#define MX53_PAD_EIM_D24__ECSPI2_SS2				0x13c 0x484 0x000 0x6 0x0
-#define MX53_PAD_EIM_D24__UART1_DTR				0x13c 0x484 0x000 0x7 0x0
-#define MX53_PAD_EIM_D25__EMI_WEIM_D_25				0x140 0x488 0x000 0x0 0x0
-#define MX53_PAD_EIM_D25__GPIO3_25				0x140 0x488 0x000 0x1 0x0
-#define MX53_PAD_EIM_D25__UART3_RXD_MUX				0x140 0x488 0x888 0x2 0x1
-#define MX53_PAD_EIM_D25__ECSPI1_SS3				0x140 0x488 0x7b4 0x3 0x1
-#define MX53_PAD_EIM_D25__CSPI_SS3				0x140 0x488 0x798 0x4 0x1
-#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC			0x140 0x488 0x750 0x5 0x1
-#define MX53_PAD_EIM_D25__ECSPI2_SS3				0x140 0x488 0x000 0x6 0x0
-#define MX53_PAD_EIM_D25__UART1_DSR				0x140 0x488 0x000 0x7 0x0
-#define MX53_PAD_EIM_D26__EMI_WEIM_D_26				0x144 0x48c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D26__GPIO3_26				0x144 0x48c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D26__UART2_RXD_MUX				0x144 0x48c 0x880 0x2 0x0
-#define MX53_PAD_EIM_D26__UART2_TXD_MUX				0x144 0x48c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D26__FIRI_RXD				0x144 0x48c 0x80c 0x3 0x0
-#define MX53_PAD_EIM_D26__IPU_CSI0_D_1				0x144 0x48c 0x000 0x4 0x0
-#define MX53_PAD_EIM_D26__IPU_DI1_PIN11				0x144 0x48c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D26__IPU_SISG_2				0x144 0x48c 0x000 0x6 0x0
-#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22			0x144 0x48c 0x000 0x7 0x0
-#define MX53_PAD_EIM_D27__EMI_WEIM_D_27				0x148 0x490 0x000 0x0 0x0
-#define MX53_PAD_EIM_D27__GPIO3_27				0x148 0x490 0x000 0x1 0x0
-#define MX53_PAD_EIM_D27__UART2_RXD_MUX				0x148 0x490 0x880 0x2 0x1
-#define MX53_PAD_EIM_D27__UART2_TXD_MUX				0x148 0x490 0x000 0x2 0x0
-#define MX53_PAD_EIM_D27__FIRI_TXD				0x148 0x490 0x000 0x3 0x0
-#define MX53_PAD_EIM_D27__IPU_CSI0_D_0				0x148 0x490 0x000 0x4 0x0
-#define MX53_PAD_EIM_D27__IPU_DI1_PIN13				0x148 0x490 0x000 0x5 0x0
-#define MX53_PAD_EIM_D27__IPU_SISG_3				0x148 0x490 0x000 0x6 0x0
-#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23			0x148 0x490 0x000 0x7 0x0
-#define MX53_PAD_EIM_D28__EMI_WEIM_D_28				0x14c 0x494 0x000 0x0 0x0
-#define MX53_PAD_EIM_D28__GPIO3_28				0x14c 0x494 0x000 0x1 0x0
-#define MX53_PAD_EIM_D28__UART2_CTS				0x14c 0x494 0x000 0x2 0x0
-#define MX53_PAD_EIM_D28__UART2_RTS				0x14c 0x494 0x87c 0x2 0x0
-#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO			0x14c 0x494 0x82c 0x3 0x1
-#define MX53_PAD_EIM_D28__CSPI_MOSI				0x14c 0x494 0x788 0x4 0x1
-#define MX53_PAD_EIM_D28__I2C1_SDA				0x14c 0x494 0x818 0x5 0x1
-#define MX53_PAD_EIM_D28__IPU_EXT_TRIG				0x14c 0x494 0x000 0x6 0x0
-#define MX53_PAD_EIM_D28__IPU_DI0_PIN13				0x14c 0x494 0x000 0x7 0x0
-#define MX53_PAD_EIM_D29__EMI_WEIM_D_29				0x150 0x498 0x000 0x0 0x0
-#define MX53_PAD_EIM_D29__GPIO3_29				0x150 0x498 0x000 0x1 0x0
-#define MX53_PAD_EIM_D29__UART2_CTS				0x150 0x498 0x000 0x2 0x0
-#define MX53_PAD_EIM_D29__UART2_RTS				0x150 0x498 0x87c 0x2 0x1
-#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS			0x150 0x498 0x000 0x3 0x0
-#define MX53_PAD_EIM_D29__CSPI_SS0				0x150 0x498 0x78c 0x4 0x2
-#define MX53_PAD_EIM_D29__IPU_DI1_PIN15				0x150 0x498 0x000 0x5 0x0
-#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC			0x150 0x498 0x83c 0x6 0x0
-#define MX53_PAD_EIM_D29__IPU_DI0_PIN14				0x150 0x498 0x000 0x7 0x0
-#define MX53_PAD_EIM_D30__EMI_WEIM_D_30				0x154 0x49c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D30__GPIO3_30				0x154 0x49c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D30__UART3_CTS				0x154 0x49c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D30__IPU_CSI0_D_3				0x154 0x49c 0x000 0x3 0x0
-#define MX53_PAD_EIM_D30__IPU_DI0_PIN11				0x154 0x49c 0x000 0x4 0x0
-#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21			0x154 0x49c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC			0x154 0x49c 0x8a0 0x6 0x0
-#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC			0x154 0x49c 0x8a4 0x7 0x1
-#define MX53_PAD_EIM_D31__EMI_WEIM_D_31				0x158 0x4a0 0x000 0x0 0x0
-#define MX53_PAD_EIM_D31__GPIO3_31				0x158 0x4a0 0x000 0x1 0x0
-#define MX53_PAD_EIM_D31__UART3_RTS				0x158 0x4a0 0x884 0x2 0x3
-#define MX53_PAD_EIM_D31__IPU_CSI0_D_2				0x158 0x4a0 0x000 0x3 0x0
-#define MX53_PAD_EIM_D31__IPU_DI0_PIN12				0x158 0x4a0 0x000 0x4 0x0
-#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20			0x158 0x4a0 0x000 0x5 0x0
-#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR			0x158 0x4a0 0x000 0x6 0x0
-#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR			0x158 0x4a0 0x000 0x7 0x0
-#define MX53_PAD_EIM_A24__EMI_WEIM_A_24				0x15c 0x4a8 0x000 0x0 0x0
-#define MX53_PAD_EIM_A24__GPIO5_4				0x15c 0x4a8 0x000 0x1 0x0
-#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19			0x15c 0x4a8 0x000 0x2 0x0
-#define MX53_PAD_EIM_A24__IPU_CSI1_D_19				0x15c 0x4a8 0x000 0x3 0x0
-#define MX53_PAD_EIM_A24__IPU_SISG_2				0x15c 0x4a8 0x000 0x6 0x0
-#define MX53_PAD_EIM_A24__USBPHY2_BVALID			0x15c 0x4a8 0x000 0x7 0x0
-#define MX53_PAD_EIM_A23__EMI_WEIM_A_23				0x160 0x4ac 0x000 0x0 0x0
-#define MX53_PAD_EIM_A23__GPIO6_6				0x160 0x4ac 0x000 0x1 0x0
-#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18			0x160 0x4ac 0x000 0x2 0x0
-#define MX53_PAD_EIM_A23__IPU_CSI1_D_18				0x160 0x4ac 0x000 0x3 0x0
-#define MX53_PAD_EIM_A23__IPU_SISG_3				0x160 0x4ac 0x000 0x6 0x0
-#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION			0x160 0x4ac 0x000 0x7 0x0
-#define MX53_PAD_EIM_A22__EMI_WEIM_A_22				0x164 0x4b0 0x000 0x0 0x0
-#define MX53_PAD_EIM_A22__GPIO2_16				0x164 0x4b0 0x000 0x1 0x0
-#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17			0x164 0x4b0 0x000 0x2 0x0
-#define MX53_PAD_EIM_A22__IPU_CSI1_D_17				0x164 0x4b0 0x000 0x3 0x0
-#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7				0x164 0x4b0 0x000 0x7 0x0
-#define MX53_PAD_EIM_A21__EMI_WEIM_A_21				0x168 0x4b4 0x000 0x0 0x0
-#define MX53_PAD_EIM_A21__GPIO2_17				0x168 0x4b4 0x000 0x1 0x0
-#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16			0x168 0x4b4 0x000 0x2 0x0
-#define MX53_PAD_EIM_A21__IPU_CSI1_D_16				0x168 0x4b4 0x000 0x3 0x0
-#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6				0x168 0x4b4 0x000 0x7 0x0
-#define MX53_PAD_EIM_A20__EMI_WEIM_A_20				0x16c 0x4b8 0x000 0x0 0x0
-#define MX53_PAD_EIM_A20__GPIO2_18				0x16c 0x4b8 0x000 0x1 0x0
-#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15			0x16c 0x4b8 0x000 0x2 0x0
-#define MX53_PAD_EIM_A20__IPU_CSI1_D_15				0x16c 0x4b8 0x000 0x3 0x0
-#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5				0x16c 0x4b8 0x000 0x7 0x0
-#define MX53_PAD_EIM_A19__EMI_WEIM_A_19				0x170 0x4bc 0x000 0x0 0x0
-#define MX53_PAD_EIM_A19__GPIO2_19				0x170 0x4bc 0x000 0x1 0x0
-#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14			0x170 0x4bc 0x000 0x2 0x0
-#define MX53_PAD_EIM_A19__IPU_CSI1_D_14				0x170 0x4bc 0x000 0x3 0x0
-#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4				0x170 0x4bc 0x000 0x7 0x0
-#define MX53_PAD_EIM_A18__EMI_WEIM_A_18				0x174 0x4c0 0x000 0x0 0x0
-#define MX53_PAD_EIM_A18__GPIO2_20				0x174 0x4c0 0x000 0x1 0x0
-#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13			0x174 0x4c0 0x000 0x2 0x0
-#define MX53_PAD_EIM_A18__IPU_CSI1_D_13				0x174 0x4c0 0x000 0x3 0x0
-#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3				0x174 0x4c0 0x000 0x7 0x0
-#define MX53_PAD_EIM_A17__EMI_WEIM_A_17				0x178 0x4c4 0x000 0x0 0x0
-#define MX53_PAD_EIM_A17__GPIO2_21				0x178 0x4c4 0x000 0x1 0x0
-#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12			0x178 0x4c4 0x000 0x2 0x0
-#define MX53_PAD_EIM_A17__IPU_CSI1_D_12				0x178 0x4c4 0x000 0x3 0x0
-#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2				0x178 0x4c4 0x000 0x7 0x0
-#define MX53_PAD_EIM_A16__EMI_WEIM_A_16				0x17c 0x4c8 0x000 0x0 0x0
-#define MX53_PAD_EIM_A16__GPIO2_22				0x17c 0x4c8 0x000 0x1 0x0
-#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK			0x17c 0x4c8 0x000 0x2 0x0
-#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK			0x17c 0x4c8 0x000 0x3 0x0
-#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1				0x17c 0x4c8 0x000 0x7 0x0
-#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0				0x180 0x4cc 0x000 0x0 0x0
-#define MX53_PAD_EIM_CS0__GPIO2_23				0x180 0x4cc 0x000 0x1 0x0
-#define MX53_PAD_EIM_CS0__ECSPI2_SCLK				0x180 0x4cc 0x7b8 0x2 0x2
-#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5				0x180 0x4cc 0x000 0x3 0x0
-#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1				0x184 0x4d0 0x000 0x0 0x0
-#define MX53_PAD_EIM_CS1__GPIO2_24				0x184 0x4d0 0x000 0x1 0x0
-#define MX53_PAD_EIM_CS1__ECSPI2_MOSI				0x184 0x4d0 0x7c0 0x2 0x2
-#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6				0x184 0x4d0 0x000 0x3 0x0
-#define MX53_PAD_EIM_OE__EMI_WEIM_OE				0x188 0x4d4 0x000 0x0 0x0
-#define MX53_PAD_EIM_OE__GPIO2_25				0x188 0x4d4 0x000 0x1 0x0
-#define MX53_PAD_EIM_OE__ECSPI2_MISO				0x188 0x4d4 0x7bc 0x2 0x2
-#define MX53_PAD_EIM_OE__IPU_DI1_PIN7				0x188 0x4d4 0x000 0x3 0x0
-#define MX53_PAD_EIM_OE__USBPHY2_IDDIG				0x188 0x4d4 0x000 0x7 0x0
-#define MX53_PAD_EIM_RW__EMI_WEIM_RW				0x18c 0x4d8 0x000 0x0 0x0
-#define MX53_PAD_EIM_RW__GPIO2_26				0x18c 0x4d8 0x000 0x1 0x0
-#define MX53_PAD_EIM_RW__ECSPI2_SS0				0x18c 0x4d8 0x7c4 0x2 0x2
-#define MX53_PAD_EIM_RW__IPU_DI1_PIN8				0x18c 0x4d8 0x000 0x3 0x0
-#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT			0x18c 0x4d8 0x000 0x7 0x0
-#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA				0x190 0x4dc 0x000 0x0 0x0
-#define MX53_PAD_EIM_LBA__GPIO2_27				0x190 0x4dc 0x000 0x1 0x0
-#define MX53_PAD_EIM_LBA__ECSPI2_SS1				0x190 0x4dc 0x7c8 0x2 0x1
-#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17				0x190 0x4dc 0x000 0x3 0x0
-#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0				0x190 0x4dc 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0				0x194 0x4e4 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB0__GPIO2_28				0x194 0x4e4 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11			0x194 0x4e4 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11				0x194 0x4e4 0x000 0x4 0x0
-#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY				0x194 0x4e4 0x810 0x5 0x0
-#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7				0x194 0x4e4 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1				0x198 0x4e8 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB1__GPIO2_29				0x198 0x4e8 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10			0x198 0x4e8 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10				0x198 0x4e8 0x000 0x4 0x0
-#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6				0x198 0x4e8 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0			0x19c 0x4ec 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA0__GPIO3_0				0x19c 0x4ec 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9			0x19c 0x4ec 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9				0x19c 0x4ec 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5				0x19c 0x4ec 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1			0x1a0 0x4f0 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA1__GPIO3_1				0x1a0 0x4f0 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8			0x1a0 0x4f0 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8				0x1a0 0x4f0 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4				0x1a0 0x4f0 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2			0x1a4 0x4f4 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA2__GPIO3_2				0x1a4 0x4f4 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7			0x1a4 0x4f4 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7				0x1a4 0x4f4 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3				0x1a4 0x4f4 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3			0x1a8 0x4f8 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA3__GPIO3_3				0x1a8 0x4f8 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6			0x1a8 0x4f8 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6				0x1a8 0x4f8 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2				0x1a8 0x4f8 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4			0x1ac 0x4fc 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA4__GPIO3_4				0x1ac 0x4fc 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5			0x1ac 0x4fc 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5				0x1ac 0x4fc 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7				0x1ac 0x4fc 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5			0x1b0 0x500 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA5__GPIO3_5				0x1b0 0x500 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4			0x1b0 0x500 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4				0x1b0 0x500 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6				0x1b0 0x500 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6			0x1b4 0x504 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA6__GPIO3_6				0x1b4 0x504 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3			0x1b4 0x504 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3				0x1b4 0x504 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5				0x1b4 0x504 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7			0x1b8 0x508 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA7__GPIO3_7				0x1b8 0x508 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2			0x1b8 0x508 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2				0x1b8 0x508 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4				0x1b8 0x508 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8			0x1bc 0x50c 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA8__GPIO3_8				0x1bc 0x50c 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1			0x1bc 0x50c 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1				0x1bc 0x50c 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3				0x1bc 0x50c 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9			0x1c0 0x510 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA9__GPIO3_9				0x1c0 0x510 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0			0x1c0 0x510 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0				0x1c0 0x510 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2				0x1c0 0x510 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10			0x1c4 0x514 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA10__GPIO3_10				0x1c4 0x514 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15			0x1c4 0x514 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN			0x1c4 0x514 0x834 0x4 0x1
-#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1			0x1c4 0x514 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11			0x1c8 0x518 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA11__GPIO3_11				0x1c8 0x518 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2				0x1c8 0x518 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC			0x1c8 0x518 0x838 0x4 0x1
-#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12			0x1cc 0x51c 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA12__GPIO3_12				0x1cc 0x51c 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3				0x1cc 0x51c 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC			0x1cc 0x51c 0x83c 0x4 0x1
-#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13			0x1d0 0x520 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA13__GPIO3_13				0x1d0 0x520 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS			0x1d0 0x520 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK			0x1d0 0x520 0x76c 0x4 0x1
-#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14			0x1d4 0x524 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA14__GPIO3_14				0x1d4 0x524 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS			0x1d4 0x524 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK			0x1d4 0x524 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15			0x1d8 0x528 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA15__GPIO3_15				0x1d8 0x528 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1				0x1d8 0x528 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4				0x1d8 0x528 0x000 0x4 0x0
-#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B			0x1dc 0x52c 0x000 0x0 0x0
-#define MX53_PAD_NANDF_WE_B__GPIO6_12				0x1dc 0x52c 0x000 0x1 0x0
-#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B			0x1e0 0x530 0x000 0x0 0x0
-#define MX53_PAD_NANDF_RE_B__GPIO6_13				0x1e0 0x530 0x000 0x1 0x0
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT			0x1e4 0x534 0x000 0x0 0x0
-#define MX53_PAD_EIM_WAIT__GPIO5_0				0x1e4 0x534 0x000 0x1 0x0
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B			0x1e4 0x534 0x000 0x2 0x0
-#define MX53_PAD_LVDS1_TX3_P__GPIO6_22				0x1ec 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3			0x1ec 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_TX2_P__GPIO6_24				0x1f0 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2			0x1f0 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_CLK_P__GPIO6_26				0x1f4 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK			0x1f4 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_TX1_P__GPIO6_28				0x1f8 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1			0x1f8 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_TX0_P__GPIO6_30				0x1fc 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0			0x1fc 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX3_P__GPIO7_22				0x200 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3			0x200 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_CLK_P__GPIO7_24				0x204 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK			0x204 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX2_P__GPIO7_26				0x208 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2			0x208 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX1_P__GPIO7_28				0x20c 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1			0x20c 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX0_P__GPIO7_30				0x210 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0			0x210 0x000 0x000 0x1 0x0
-#define MX53_PAD_GPIO_10__GPIO4_0				0x214 0x540 0x000 0x0 0x0
-#define MX53_PAD_GPIO_10__OSC32k_32K_OUT			0x214 0x540 0x000 0x1 0x0
-#define MX53_PAD_GPIO_11__GPIO4_1				0x218 0x544 0x000 0x0 0x0
-#define MX53_PAD_GPIO_12__GPIO4_2				0x21c 0x548 0x000 0x0 0x0
-#define MX53_PAD_GPIO_13__GPIO4_3				0x220 0x54c 0x000 0x0 0x0
-#define MX53_PAD_GPIO_14__GPIO4_4				0x224 0x550 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE			0x228 0x5a0 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CLE__GPIO6_7				0x228 0x5a0 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0			0x228 0x5a0 0x000 0x7 0x0
-#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE			0x22c 0x5a4 0x000 0x0 0x0
-#define MX53_PAD_NANDF_ALE__GPIO6_8				0x22c 0x5a4 0x000 0x1 0x0
-#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1			0x22c 0x5a4 0x000 0x7 0x0
-#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B			0x230 0x5a8 0x000 0x0 0x0
-#define MX53_PAD_NANDF_WP_B__GPIO6_9				0x230 0x5a8 0x000 0x1 0x0
-#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2			0x230 0x5a8 0x000 0x7 0x0
-#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0			0x234 0x5ac 0x000 0x0 0x0
-#define MX53_PAD_NANDF_RB0__GPIO6_10				0x234 0x5ac 0x000 0x1 0x0
-#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3			0x234 0x5ac 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0			0x238 0x5b0 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS0__GPIO6_11				0x238 0x5b0 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4			0x238 0x5b0 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1			0x23c 0x5b4 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS1__GPIO6_14				0x23c 0x5b4 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS1__MLB_MLBCLK				0x23c 0x5b4 0x858 0x6 0x0
-#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5			0x23c 0x5b4 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2			0x240 0x5b8 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS2__GPIO6_15				0x240 0x5b8 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS2__IPU_SISG_0				0x240 0x5b8 0x000 0x2 0x0
-#define MX53_PAD_NANDF_CS2__ESAI1_TX0				0x240 0x5b8 0x7e4 0x3 0x0
-#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE			0x240 0x5b8 0x000 0x4 0x0
-#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK			0x240 0x5b8 0x000 0x5 0x0
-#define MX53_PAD_NANDF_CS2__MLB_MLBSIG				0x240 0x5b8 0x860 0x6 0x0
-#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6			0x240 0x5b8 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3			0x244 0x5bc 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS3__GPIO6_16				0x244 0x5bc 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS3__IPU_SISG_1				0x244 0x5bc 0x000 0x2 0x0
-#define MX53_PAD_NANDF_CS3__ESAI1_TX1				0x244 0x5bc 0x7e8 0x3 0x0
-#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26			0x244 0x5bc 0x000 0x4 0x0
-#define MX53_PAD_NANDF_CS3__MLB_MLBDAT				0x244 0x5bc 0x85c 0x6 0x0
-#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7			0x244 0x5bc 0x000 0x7 0x0
-#define MX53_PAD_FEC_MDIO__FEC_MDIO				0x248 0x5c4 0x804 0x0 0x1
-#define MX53_PAD_FEC_MDIO__GPIO1_22				0x248 0x5c4 0x000 0x1 0x0
-#define MX53_PAD_FEC_MDIO__ESAI1_SCKR				0x248 0x5c4 0x7dc 0x2 0x0
-#define MX53_PAD_FEC_MDIO__FEC_COL				0x248 0x5c4 0x800 0x3 0x1
-#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2			0x248 0x5c4 0x000 0x4 0x0
-#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3		0x248 0x5c4 0x000 0x5 0x0
-#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49			0x248 0x5c4 0x000 0x6 0x0
-#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK			0x24c 0x5c8 0x000 0x0 0x0
-#define MX53_PAD_FEC_REF_CLK__GPIO1_23				0x24c 0x5c8 0x000 0x1 0x0
-#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR				0x24c 0x5c8 0x7cc 0x2 0x0
-#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4		0x24c 0x5c8 0x000 0x5 0x0
-#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50			0x24c 0x5c8 0x000 0x6 0x0
-#define MX53_PAD_FEC_RX_ER__FEC_RX_ER				0x250 0x5cc 0x000 0x0 0x0
-#define MX53_PAD_FEC_RX_ER__GPIO1_24				0x250 0x5cc 0x000 0x1 0x0
-#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR				0x250 0x5cc 0x7d4 0x2 0x0
-#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK				0x250 0x5cc 0x808 0x3 0x1
-#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3			0x250 0x5cc 0x000 0x4 0x0
-#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV				0x254 0x5d0 0x000 0x0 0x0
-#define MX53_PAD_FEC_CRS_DV__GPIO1_25				0x254 0x5d0 0x000 0x1 0x0
-#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT				0x254 0x5d0 0x7e0 0x2 0x0
-#define MX53_PAD_FEC_RXD1__FEC_RDATA_1				0x258 0x5d4 0x000 0x0 0x0
-#define MX53_PAD_FEC_RXD1__GPIO1_26				0x258 0x5d4 0x000 0x1 0x0
-#define MX53_PAD_FEC_RXD1__ESAI1_FST				0x258 0x5d4 0x7d0 0x2 0x0
-#define MX53_PAD_FEC_RXD1__MLB_MLBSIG				0x258 0x5d4 0x860 0x3 0x1
-#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1			0x258 0x5d4 0x000 0x4 0x0
-#define MX53_PAD_FEC_RXD0__FEC_RDATA_0				0x25c 0x5d8 0x000 0x0 0x0
-#define MX53_PAD_FEC_RXD0__GPIO1_27				0x25c 0x5d8 0x000 0x1 0x0
-#define MX53_PAD_FEC_RXD0__ESAI1_HCKT				0x25c 0x5d8 0x7d8 0x2 0x0
-#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT			0x25c 0x5d8 0x000 0x3 0x0
-#define MX53_PAD_FEC_TX_EN__FEC_TX_EN				0x260 0x5dc 0x000 0x0 0x0
-#define MX53_PAD_FEC_TX_EN__GPIO1_28				0x260 0x5dc 0x000 0x1 0x0
-#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2			0x260 0x5dc 0x7f0 0x2 0x0
-#define MX53_PAD_FEC_TXD1__FEC_TDATA_1				0x264 0x5e0 0x000 0x0 0x0
-#define MX53_PAD_FEC_TXD1__GPIO1_29				0x264 0x5e0 0x000 0x1 0x0
-#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3			0x264 0x5e0 0x7ec 0x2 0x0
-#define MX53_PAD_FEC_TXD1__MLB_MLBCLK				0x264 0x5e0 0x858 0x3 0x1
-#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK			0x264 0x5e0 0x000 0x4 0x0
-#define MX53_PAD_FEC_TXD0__FEC_TDATA_0				0x268 0x5e4 0x000 0x0 0x0
-#define MX53_PAD_FEC_TXD0__GPIO1_30				0x268 0x5e4 0x000 0x1 0x0
-#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1			0x268 0x5e4 0x7f4 0x2 0x0
-#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0			0x268 0x5e4 0x000 0x7 0x0
-#define MX53_PAD_FEC_MDC__FEC_MDC				0x26c 0x5e8 0x000 0x0 0x0
-#define MX53_PAD_FEC_MDC__GPIO1_31				0x26c 0x5e8 0x000 0x1 0x0
-#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0				0x26c 0x5e8 0x7f8 0x2 0x0
-#define MX53_PAD_FEC_MDC__MLB_MLBDAT				0x26c 0x5e8 0x85c 0x3 0x1
-#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG		0x26c 0x5e8 0x000 0x4 0x0
-#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1			0x26c 0x5e8 0x000 0x7 0x0
-#define MX53_PAD_PATA_DIOW__PATA_DIOW				0x270 0x5f0 0x000 0x0 0x0
-#define MX53_PAD_PATA_DIOW__GPIO6_17				0x270 0x5f0 0x000 0x1 0x0
-#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX			0x270 0x5f0 0x000 0x3 0x0
-#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2			0x270 0x5f0 0x000 0x7 0x0
-#define MX53_PAD_PATA_DMACK__PATA_DMACK				0x274 0x5f4 0x000 0x0 0x0
-#define MX53_PAD_PATA_DMACK__GPIO6_18				0x274 0x5f4 0x000 0x1 0x0
-#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX			0x274 0x5f4 0x878 0x3 0x3
-#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3			0x274 0x5f4 0x000 0x7 0x0
-#define MX53_PAD_PATA_DMARQ__PATA_DMARQ				0x278 0x5f8 0x000 0x0 0x0
-#define MX53_PAD_PATA_DMARQ__GPIO7_0				0x278 0x5f8 0x000 0x1 0x0
-#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX			0x278 0x5f8 0x000 0x3 0x0
-#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0			0x278 0x5f8 0x000 0x5 0x0
-#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4			0x278 0x5f8 0x000 0x7 0x0
-#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN			0x27c 0x5fc 0x000 0x0 0x0
-#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1			0x27c 0x5fc 0x000 0x1 0x0
-#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX			0x27c 0x5fc 0x880 0x3 0x3
-#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1			0x27c 0x5fc 0x000 0x5 0x0
-#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5		0x27c 0x5fc 0x000 0x7 0x0
-#define MX53_PAD_PATA_INTRQ__PATA_INTRQ				0x280 0x600 0x000 0x0 0x0
-#define MX53_PAD_PATA_INTRQ__GPIO7_2				0x280 0x600 0x000 0x1 0x0
-#define MX53_PAD_PATA_INTRQ__UART2_CTS				0x280 0x600 0x000 0x3 0x0
-#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN				0x280 0x600 0x000 0x4 0x0
-#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2			0x280 0x600 0x000 0x5 0x0
-#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6			0x280 0x600 0x000 0x7 0x0
-#define MX53_PAD_PATA_DIOR__PATA_DIOR				0x284 0x604 0x000 0x0 0x0
-#define MX53_PAD_PATA_DIOR__GPIO7_3				0x284 0x604 0x000 0x1 0x0
-#define MX53_PAD_PATA_DIOR__UART2_RTS				0x284 0x604 0x87c 0x3 0x3
-#define MX53_PAD_PATA_DIOR__CAN1_RXCAN				0x284 0x604 0x760 0x4 0x1
-#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7			0x284 0x604 0x000 0x7 0x0
-#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B		0x288 0x608 0x000 0x0 0x0
-#define MX53_PAD_PATA_RESET_B__GPIO7_4				0x288 0x608 0x000 0x1 0x0
-#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD			0x288 0x608 0x000 0x2 0x0
-#define MX53_PAD_PATA_RESET_B__UART1_CTS			0x288 0x608 0x000 0x3 0x0
-#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN			0x288 0x608 0x000 0x4 0x0
-#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0		0x288 0x608 0x000 0x7 0x0
-#define MX53_PAD_PATA_IORDY__PATA_IORDY				0x28c 0x60c 0x000 0x0 0x0
-#define MX53_PAD_PATA_IORDY__GPIO7_5				0x28c 0x60c 0x000 0x1 0x0
-#define MX53_PAD_PATA_IORDY__ESDHC3_CLK				0x28c 0x60c 0x000 0x2 0x0
-#define MX53_PAD_PATA_IORDY__UART1_RTS				0x28c 0x60c 0x874 0x3 0x3
-#define MX53_PAD_PATA_IORDY__CAN2_RXCAN				0x28c 0x60c 0x764 0x4 0x1
-#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1			0x28c 0x60c 0x000 0x7 0x0
-#define MX53_PAD_PATA_DA_0__PATA_DA_0				0x290 0x610 0x000 0x0 0x0
-#define MX53_PAD_PATA_DA_0__GPIO7_6				0x290 0x610 0x000 0x1 0x0
-#define MX53_PAD_PATA_DA_0__ESDHC3_RST				0x290 0x610 0x000 0x2 0x0
-#define MX53_PAD_PATA_DA_0__OWIRE_LINE				0x290 0x610 0x864 0x4 0x0
-#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2			0x290 0x610 0x000 0x7 0x0
-#define MX53_PAD_PATA_DA_1__PATA_DA_1				0x294 0x614 0x000 0x0 0x0
-#define MX53_PAD_PATA_DA_1__GPIO7_7				0x294 0x614 0x000 0x1 0x0
-#define MX53_PAD_PATA_DA_1__ESDHC4_CMD				0x294 0x614 0x000 0x2 0x0
-#define MX53_PAD_PATA_DA_1__UART3_CTS				0x294 0x614 0x000 0x4 0x0
-#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3			0x294 0x614 0x000 0x7 0x0
-#define MX53_PAD_PATA_DA_2__PATA_DA_2				0x298 0x618 0x000 0x0 0x0
-#define MX53_PAD_PATA_DA_2__GPIO7_8				0x298 0x618 0x000 0x1 0x0
-#define MX53_PAD_PATA_DA_2__ESDHC4_CLK				0x298 0x618 0x000 0x2 0x0
-#define MX53_PAD_PATA_DA_2__UART3_RTS				0x298 0x618 0x884 0x4 0x5
-#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4			0x298 0x618 0x000 0x7 0x0
-#define MX53_PAD_PATA_CS_0__PATA_CS_0				0x29c 0x61c 0x000 0x0 0x0
-#define MX53_PAD_PATA_CS_0__GPIO7_9				0x29c 0x61c 0x000 0x1 0x0
-#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX			0x29c 0x61c 0x000 0x4 0x0
-#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5			0x29c 0x61c 0x000 0x7 0x0
-#define MX53_PAD_PATA_CS_1__PATA_CS_1				0x2a0 0x620 0x000 0x0 0x0
-#define MX53_PAD_PATA_CS_1__GPIO7_10				0x2a0 0x620 0x000 0x1 0x0
-#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX			0x2a0 0x620 0x888 0x4 0x3
-#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6			0x2a0 0x620 0x000 0x7 0x0
-#define MX53_PAD_PATA_DATA0__PATA_DATA_0			0x2a4 0x628 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA0__GPIO2_0				0x2a4 0x628 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0			0x2a4 0x628 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4			0x2a4 0x628 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0		0x2a4 0x628 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0			0x2a4 0x628 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7			0x2a4 0x628 0x000 0x7 0x0
-#define MX53_PAD_PATA_DATA1__PATA_DATA_1			0x2a8 0x62c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA1__GPIO2_1				0x2a8 0x62c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1			0x2a8 0x62c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5			0x2a8 0x62c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1		0x2a8 0x62c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1			0x2a8 0x62c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA2__PATA_DATA_2			0x2ac 0x630 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA2__GPIO2_2				0x2ac 0x630 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2			0x2ac 0x630 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6			0x2ac 0x630 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2		0x2ac 0x630 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2			0x2ac 0x630 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA3__PATA_DATA_3			0x2b0 0x634 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA3__GPIO2_3				0x2b0 0x634 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3			0x2b0 0x634 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7			0x2b0 0x634 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3		0x2b0 0x634 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3			0x2b0 0x634 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA4__PATA_DATA_4			0x2b4 0x638 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA4__GPIO2_4				0x2b4 0x638 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4			0x2b4 0x638 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4			0x2b4 0x638 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4		0x2b4 0x638 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4			0x2b4 0x638 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA5__PATA_DATA_5			0x2b8 0x63c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA5__GPIO2_5				0x2b8 0x63c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5			0x2b8 0x63c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5			0x2b8 0x63c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5		0x2b8 0x63c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5			0x2b8 0x63c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA6__PATA_DATA_6			0x2bc 0x640 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA6__GPIO2_6				0x2bc 0x640 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6			0x2bc 0x640 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6			0x2bc 0x640 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6		0x2bc 0x640 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6			0x2bc 0x640 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA7__PATA_DATA_7			0x2c0 0x644 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA7__GPIO2_7				0x2c0 0x644 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7			0x2c0 0x644 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7			0x2c0 0x644 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7		0x2c0 0x644 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7			0x2c0 0x644 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA8__PATA_DATA_8			0x2c4 0x648 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA8__GPIO2_8				0x2c4 0x648 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4			0x2c4 0x648 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8			0x2c4 0x648 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0			0x2c4 0x648 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8		0x2c4 0x648 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8			0x2c4 0x648 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA9__PATA_DATA_9			0x2c8 0x64c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA9__GPIO2_9				0x2c8 0x64c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5			0x2c8 0x64c 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9			0x2c8 0x64c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1			0x2c8 0x64c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9		0x2c8 0x64c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9			0x2c8 0x64c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA10__PATA_DATA_10			0x2cc 0x650 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA10__GPIO2_10				0x2cc 0x650 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6			0x2cc 0x650 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10			0x2cc 0x650 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2			0x2cc 0x650 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10		0x2cc 0x650 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10			0x2cc 0x650 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA11__PATA_DATA_11			0x2d0 0x654 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA11__GPIO2_11				0x2d0 0x654 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7			0x2d0 0x654 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11			0x2d0 0x654 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3			0x2d0 0x654 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11		0x2d0 0x654 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11			0x2d0 0x654 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA12__PATA_DATA_12			0x2d4 0x658 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA12__GPIO2_12				0x2d4 0x658 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4			0x2d4 0x658 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12			0x2d4 0x658 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0			0x2d4 0x658 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12		0x2d4 0x658 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12			0x2d4 0x658 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA13__PATA_DATA_13			0x2d8 0x65c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA13__GPIO2_13				0x2d8 0x65c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5			0x2d8 0x65c 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13			0x2d8 0x65c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1			0x2d8 0x65c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13		0x2d8 0x65c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13			0x2d8 0x65c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA14__PATA_DATA_14			0x2dc 0x660 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA14__GPIO2_14				0x2dc 0x660 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6			0x2dc 0x660 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14			0x2dc 0x660 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2			0x2dc 0x660 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14		0x2dc 0x660 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14			0x2dc 0x660 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA15__PATA_DATA_15			0x2e0 0x664 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA15__GPIO2_15				0x2e0 0x664 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7			0x2e0 0x664 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15			0x2e0 0x664 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3			0x2e0 0x664 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15		0x2e0 0x664 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15			0x2e0 0x664 0x000 0x6 0x0
-#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0				0x2e4 0x66c 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA0__GPIO1_16				0x2e4 0x66c 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA0__GPT_CAPIN1				0x2e4 0x66c 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA0__CSPI_MISO				0x2e4 0x66c 0x784 0x5 0x2
-#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP			0x2e4 0x66c 0x778 0x7 0x0
-#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1				0x2e8 0x670 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA1__GPIO1_17				0x2e8 0x670 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA1__GPT_CAPIN2				0x2e8 0x670 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA1__CSPI_SS0				0x2e8 0x670 0x78c 0x5 0x3
-#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP			0x2e8 0x670 0x77c 0x7 0x1
-#define MX53_PAD_SD1_CMD__ESDHC1_CMD				0x2ec 0x674 0x000 0x0 0x0
-#define MX53_PAD_SD1_CMD__GPIO1_18				0x2ec 0x674 0x000 0x1 0x0
-#define MX53_PAD_SD1_CMD__GPT_CMPOUT1				0x2ec 0x674 0x000 0x3 0x0
-#define MX53_PAD_SD1_CMD__CSPI_MOSI				0x2ec 0x674 0x788 0x5 0x2
-#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP				0x2ec 0x674 0x770 0x7 0x0
-#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2				0x2f0 0x678 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA2__GPIO1_19				0x2f0 0x678 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2				0x2f0 0x678 0x000 0x2 0x0
-#define MX53_PAD_SD1_DATA2__PWM2_PWMO				0x2f0 0x678 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B			0x2f0 0x678 0x000 0x4 0x0
-#define MX53_PAD_SD1_DATA2__CSPI_SS1				0x2f0 0x678 0x790 0x5 0x2
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB		0x2f0 0x678 0x000 0x6 0x0
-#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP			0x2f0 0x678 0x774 0x7 0x0
-#define MX53_PAD_SD1_CLK__ESDHC1_CLK				0x2f4 0x67c 0x000 0x0 0x0
-#define MX53_PAD_SD1_CLK__GPIO1_20				0x2f4 0x67c 0x000 0x1 0x0
-#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT			0x2f4 0x67c 0x000 0x2 0x0
-#define MX53_PAD_SD1_CLK__GPT_CLKIN				0x2f4 0x67c 0x000 0x3 0x0
-#define MX53_PAD_SD1_CLK__CSPI_SCLK				0x2f4 0x67c 0x780 0x5 0x2
-#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0			0x2f4 0x67c 0x000 0x7 0x0
-#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3				0x2f8 0x680 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA3__GPIO1_21				0x2f8 0x680 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3				0x2f8 0x680 0x000 0x2 0x0
-#define MX53_PAD_SD1_DATA3__PWM1_PWMO				0x2f8 0x680 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B			0x2f8 0x680 0x000 0x4 0x0
-#define MX53_PAD_SD1_DATA3__CSPI_SS2				0x2f8 0x680 0x794 0x5 0x2
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB		0x2f8 0x680 0x000 0x6 0x0
-#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1			0x2f8 0x680 0x000 0x7 0x0
-#define MX53_PAD_SD2_CLK__ESDHC2_CLK				0x2fc 0x688 0x000 0x0 0x0
-#define MX53_PAD_SD2_CLK__GPIO1_10				0x2fc 0x688 0x000 0x1 0x0
-#define MX53_PAD_SD2_CLK__KPP_COL_5				0x2fc 0x688 0x840 0x2 0x2
-#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS			0x2fc 0x688 0x73c 0x3 0x1
-#define MX53_PAD_SD2_CLK__CSPI_SCLK				0x2fc 0x688 0x780 0x5 0x3
-#define MX53_PAD_SD2_CLK__SCC_RANDOM_V				0x2fc 0x688 0x000 0x7 0x0
-#define MX53_PAD_SD2_CMD__ESDHC2_CMD				0x300 0x68c 0x000 0x0 0x0
-#define MX53_PAD_SD2_CMD__GPIO1_11				0x300 0x68c 0x000 0x1 0x0
-#define MX53_PAD_SD2_CMD__KPP_ROW_5				0x300 0x68c 0x84c 0x2 0x1
-#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC			0x300 0x68c 0x738 0x3 0x1
-#define MX53_PAD_SD2_CMD__CSPI_MOSI				0x300 0x68c 0x788 0x5 0x3
-#define MX53_PAD_SD2_CMD__SCC_RANDOM				0x300 0x68c 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3				0x304 0x690 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA3__GPIO1_12				0x304 0x690 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA3__KPP_COL_6				0x304 0x690 0x844 0x2 0x1
-#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC			0x304 0x690 0x740 0x3 0x1
-#define MX53_PAD_SD2_DATA3__CSPI_SS2				0x304 0x690 0x794 0x5 0x3
-#define MX53_PAD_SD2_DATA3__SJC_DONE				0x304 0x690 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2				0x308 0x694 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA2__GPIO1_13				0x308 0x694 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA2__KPP_ROW_6				0x308 0x694 0x850 0x2 0x1
-#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD			0x308 0x694 0x734 0x3 0x1
-#define MX53_PAD_SD2_DATA2__CSPI_SS1				0x308 0x694 0x790 0x5 0x3
-#define MX53_PAD_SD2_DATA2__SJC_FAIL				0x308 0x694 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1				0x30c 0x698 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA1__GPIO1_14				0x30c 0x698 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA1__KPP_COL_7				0x30c 0x698 0x848 0x2 0x1
-#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS			0x30c 0x698 0x744 0x3 0x1
-#define MX53_PAD_SD2_DATA1__CSPI_SS0				0x30c 0x698 0x78c 0x5 0x4
-#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO			0x30c 0x698 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0				0x310 0x69c 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA0__GPIO1_15				0x310 0x69c 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA0__KPP_ROW_7				0x310 0x69c 0x854 0x2 0x1
-#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD			0x310 0x69c 0x730 0x3 0x1
-#define MX53_PAD_SD2_DATA0__CSPI_MISO				0x310 0x69c 0x784 0x5 0x3
-#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT			0x310 0x69c 0x000 0x7 0x0
-#define MX53_PAD_GPIO_0__CCM_CLKO				0x314 0x6a4 0x000 0x0 0x0
-#define MX53_PAD_GPIO_0__GPIO1_0				0x314 0x6a4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_0__KPP_COL_5				0x314 0x6a4 0x840 0x2 0x3
-#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK			0x314 0x6a4 0x000 0x3 0x0
-#define MX53_PAD_GPIO_0__EPIT1_EPITO				0x314 0x6a4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB				0x314 0x6a4 0x000 0x5 0x0
-#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR			0x314 0x6a4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_0__CSU_TD					0x314 0x6a4 0x000 0x7 0x0
-#define MX53_PAD_GPIO_1__ESAI1_SCKR				0x318 0x6a8 0x7dc 0x0 0x1
-#define MX53_PAD_GPIO_1__GPIO1_1				0x318 0x6a8 0x000 0x1 0x0
-#define MX53_PAD_GPIO_1__KPP_ROW_5				0x318 0x6a8 0x84c 0x2 0x2
-#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK			0x318 0x6a8 0x000 0x3 0x0
-#define MX53_PAD_GPIO_1__PWM2_PWMO				0x318 0x6a8 0x000 0x4 0x0
-#define MX53_PAD_GPIO_1__WDOG2_WDOG_B				0x318 0x6a8 0x000 0x5 0x0
-#define MX53_PAD_GPIO_1__ESDHC1_CD				0x318 0x6a8 0x000 0x6 0x0
-#define MX53_PAD_GPIO_1__SRC_TESTER_ACK				0x318 0x6a8 0x000 0x7 0x0
-#define MX53_PAD_GPIO_9__ESAI1_FSR				0x31c 0x6ac 0x7cc 0x0 0x1
-#define MX53_PAD_GPIO_9__GPIO1_9				0x31c 0x6ac 0x000 0x1 0x0
-#define MX53_PAD_GPIO_9__KPP_COL_6				0x31c 0x6ac 0x844 0x2 0x2
-#define MX53_PAD_GPIO_9__CCM_REF_EN_B				0x31c 0x6ac 0x000 0x3 0x0
-#define MX53_PAD_GPIO_9__PWM1_PWMO				0x31c 0x6ac 0x000 0x4 0x0
-#define MX53_PAD_GPIO_9__WDOG1_WDOG_B				0x31c 0x6ac 0x000 0x5 0x0
-#define MX53_PAD_GPIO_9__ESDHC1_WP				0x31c 0x6ac 0x7fc 0x6 0x1
-#define MX53_PAD_GPIO_9__SCC_FAIL_STATE				0x31c 0x6ac 0x000 0x7 0x0
-#define MX53_PAD_GPIO_3__ESAI1_HCKR				0x320 0x6b0 0x7d4 0x0 0x1
-#define MX53_PAD_GPIO_3__GPIO1_3				0x320 0x6b0 0x000 0x1 0x0
-#define MX53_PAD_GPIO_3__I2C3_SCL				0x320 0x6b0 0x824 0x2 0x1
-#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN				0x320 0x6b0 0x000 0x3 0x0
-#define MX53_PAD_GPIO_3__CCM_CLKO2				0x320 0x6b0 0x000 0x4 0x0
-#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0		0x320 0x6b0 0x000 0x5 0x0
-#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC			0x320 0x6b0 0x8a0 0x6 0x1
-#define MX53_PAD_GPIO_3__MLB_MLBCLK				0x320 0x6b0 0x858 0x7 0x2
-#define MX53_PAD_GPIO_6__ESAI1_SCKT				0x324 0x6b4 0x7e0 0x0 0x1
-#define MX53_PAD_GPIO_6__GPIO1_6				0x324 0x6b4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_6__I2C3_SDA				0x324 0x6b4 0x828 0x2 0x1
-#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0				0x324 0x6b4 0x000 0x3 0x0
-#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB			0x324 0x6b4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1		0x324 0x6b4 0x000 0x5 0x0
-#define MX53_PAD_GPIO_6__ESDHC2_LCTL				0x324 0x6b4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_6__MLB_MLBSIG				0x324 0x6b4 0x860 0x7 0x2
-#define MX53_PAD_GPIO_2__ESAI1_FST				0x328 0x6b8 0x7d0 0x0 0x1
-#define MX53_PAD_GPIO_2__GPIO1_2				0x328 0x6b8 0x000 0x1 0x0
-#define MX53_PAD_GPIO_2__KPP_ROW_6				0x328 0x6b8 0x850 0x2 0x2
-#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1				0x328 0x6b8 0x000 0x3 0x0
-#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0			0x328 0x6b8 0x000 0x4 0x0
-#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2		0x328 0x6b8 0x000 0x5 0x0
-#define MX53_PAD_GPIO_2__ESDHC2_WP				0x328 0x6b8 0x000 0x6 0x0
-#define MX53_PAD_GPIO_2__MLB_MLBDAT				0x328 0x6b8 0x85c 0x7 0x2
-#define MX53_PAD_GPIO_4__ESAI1_HCKT				0x32c 0x6bc 0x7d8 0x0 0x1
-#define MX53_PAD_GPIO_4__GPIO1_4				0x32c 0x6bc 0x000 0x1 0x0
-#define MX53_PAD_GPIO_4__KPP_COL_7				0x32c 0x6bc 0x848 0x2 0x2
-#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2				0x32c 0x6bc 0x000 0x3 0x0
-#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1			0x32c 0x6bc 0x000 0x4 0x0
-#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3		0x32c 0x6bc 0x000 0x5 0x0
-#define MX53_PAD_GPIO_4__ESDHC2_CD				0x32c 0x6bc 0x000 0x6 0x0
-#define MX53_PAD_GPIO_4__SCC_SEC_STATE				0x32c 0x6bc 0x000 0x7 0x0
-#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3				0x330 0x6c0 0x7ec 0x0 0x1
-#define MX53_PAD_GPIO_5__GPIO1_5				0x330 0x6c0 0x000 0x1 0x0
-#define MX53_PAD_GPIO_5__KPP_ROW_7				0x330 0x6c0 0x854 0x2 0x2
-#define MX53_PAD_GPIO_5__CCM_CLKO				0x330 0x6c0 0x000 0x3 0x0
-#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2			0x330 0x6c0 0x000 0x4 0x0
-#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4		0x330 0x6c0 0x000 0x5 0x0
-#define MX53_PAD_GPIO_5__I2C3_SCL				0x330 0x6c0 0x824 0x6 0x2
-#define MX53_PAD_GPIO_5__CCM_PLL1_BYP				0x330 0x6c0 0x770 0x7 0x1
-#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1				0x334 0x6c4 0x7f4 0x0 0x1
-#define MX53_PAD_GPIO_7__GPIO1_7				0x334 0x6c4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_7__EPIT1_EPITO				0x334 0x6c4 0x000 0x2 0x0
-#define MX53_PAD_GPIO_7__CAN1_TXCAN				0x334 0x6c4 0x000 0x3 0x0
-#define MX53_PAD_GPIO_7__UART2_TXD_MUX				0x334 0x6c4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_7__FIRI_RXD				0x334 0x6c4 0x80c 0x5 0x1
-#define MX53_PAD_GPIO_7__SPDIF_PLOCK				0x334 0x6c4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_7__CCM_PLL2_BYP				0x334 0x6c4 0x774 0x7 0x1
-#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0				0x338 0x6c8 0x7f8 0x0 0x1
-#define MX53_PAD_GPIO_8__GPIO1_8				0x338 0x6c8 0x000 0x1 0x0
-#define MX53_PAD_GPIO_8__EPIT2_EPITO				0x338 0x6c8 0x000 0x2 0x0
-#define MX53_PAD_GPIO_8__CAN1_RXCAN				0x338 0x6c8 0x760 0x3 0x2
-#define MX53_PAD_GPIO_8__UART2_RXD_MUX				0x338 0x6c8 0x880 0x4 0x5
-#define MX53_PAD_GPIO_8__FIRI_TXD				0x338 0x6c8 0x000 0x5 0x0
-#define MX53_PAD_GPIO_8__SPDIF_SRCLK				0x338 0x6c8 0x000 0x6 0x0
-#define MX53_PAD_GPIO_8__CCM_PLL3_BYP				0x338 0x6c8 0x778 0x7 0x1
-#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2				0x33c 0x6cc 0x7f0 0x0 0x1
-#define MX53_PAD_GPIO_16__GPIO7_11				0x33c 0x6cc 0x000 0x1 0x0
-#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT			0x33c 0x6cc 0x000 0x2 0x0
-#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1			0x33c 0x6cc 0x000 0x4 0x0
-#define MX53_PAD_GPIO_16__SPDIF_IN1				0x33c 0x6cc 0x870 0x5 0x1
-#define MX53_PAD_GPIO_16__I2C3_SDA				0x33c 0x6cc 0x828 0x6 0x2
-#define MX53_PAD_GPIO_16__SJC_DE_B				0x33c 0x6cc 0x000 0x7 0x0
-#define MX53_PAD_GPIO_17__ESAI1_TX0				0x340 0x6d0 0x7e4 0x0 0x1
-#define MX53_PAD_GPIO_17__GPIO7_12				0x340 0x6d0 0x000 0x1 0x0
-#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0			0x340 0x6d0 0x868 0x2 0x1
-#define MX53_PAD_GPIO_17__GPC_PMIC_RDY				0x340 0x6d0 0x810 0x3 0x1
-#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG			0x340 0x6d0 0x000 0x4 0x0
-#define MX53_PAD_GPIO_17__SPDIF_OUT1				0x340 0x6d0 0x000 0x5 0x0
-#define MX53_PAD_GPIO_17__IPU_SNOOP2				0x340 0x6d0 0x000 0x6 0x0
-#define MX53_PAD_GPIO_17__SJC_JTAG_ACT				0x340 0x6d0 0x000 0x7 0x0
-#define MX53_PAD_GPIO_18__ESAI1_TX1				0x344 0x6d4 0x7e8 0x0 0x1
-#define MX53_PAD_GPIO_18__GPIO7_13				0x344 0x6d4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1			0x344 0x6d4 0x86c 0x2 0x1
-#define MX53_PAD_GPIO_18__OWIRE_LINE				0x344 0x6d4 0x864 0x3 0x1
-#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG		0x344 0x6d4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK			0x344 0x6d4 0x768 0x5 0x1
-#define MX53_PAD_GPIO_18__ESDHC1_LCTL				0x344 0x6d4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST			0x344 0x6d4 0x000 0x7 0x0
-
-#endif /* __DTS_IMX53_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
deleted file mode 100644
index 70c4a4852256c..0000000000000
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ /dev/null
@@ -1,1122 +0,0 @@
-/*
- * Copyright 2014 General Electric Company
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx53.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "General Electric CS ONE";
-	compatible = "ge,imx53-cpuvo", "fsl,imx53";
-
-	aliases {
-		spi0 = &cspi;
-		spi1 = &ecspi1;
-		spi2 = &ecspi2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	cko2_11M: sgtl-clock-cko2 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <11289600>;
-	};
-
-	achc_24M: achc-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-	};
-
-	sgtlsound: sound {
-		compatible = "fsl,imx53-cpuvo-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-cpuvo-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <6>;
-	};
-
-	reg_sgtl5k: regulator-sgtl5k {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-sgtl5k";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbotg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-0 = <&pinctrl_usb_otg_vbus>;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbh1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usbh2_vbus: regulator-usbh2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbh2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh2_vbus>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usbh3_vbus: regulator-usbh3-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbh3_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh3_vbus>;
-		gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_tsiref: regulator-tsiref {
-		compatible = "regulator-fixed";
-		regulator-name = "tsiref";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3v3: regulator-3v3 {
-		/* TPS54320 */
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_3v3_lcd: regulator-3v3-lcd {
-		/* MIC2009 */
-		compatible = "regulator-fixed";
-		regulator-name = "LCD_3V3";
-		vin-supply = <&reg_3v3>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	pwm_bl: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
-		brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
-				     38 40 43 45 48 51 53 56 58 61 63 66 68 71
-				     73 76 79 81 84 86 89 91 94 96 99 102 104
-				     107 109 112 114 117 119 122 124 127 130
-				     132 135 137 140 142 145 147 150 153 155
-				     158 160 163 165 168 170 173 175 178 181
-				     183 186 188 191 193 196 198 201 204 206
-				     209 211 214 216 219 221 224 226 229 232
-				     234 237 239 242 244 247 249 252 255>;
-		default-brightness-level = <0>;
-		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-		power-supply = <&reg_3v3_lcd>;
-	};
-
-	led-controller-1 {
-		compatible = "pwm-leds";
-
-		led-1 {
-			label = "alarm-brightness";
-			pwms = <&pwm1 0 100000>;
-			max-brightness = <255>;
-		};
-	};
-
-	led-controller-2 {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_alarmled_pins>;
-
-		led-2 {
-			label = "alarm:red";
-			gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-3 {
-			label = "alarm:yellow";
-			gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-4 {
-			label = "alarm:blue";
-			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-5 {
-			label = "alarm:silenced";
-			gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
-		active-delay = <100>;
-		inactive-delay = <10>;
-		wait-delay = <100>;
-	};
-
-	power-gpio-keys {
-		compatible = "gpio-keys";
-
-		power-button {
-			label = "Power button";
-			gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-		};
-	};
-
-	touch-lock-key {
-		compatible = "gpio-keys";
-
-		touch-lock-button {
-			label = "Touch lock button";
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_F12>;
-		};
-	};
-
-	usbphy2: usbphy-2 {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_3v3>;
-		reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
-		clock-names = "main_clk";
-		clock-frequency = <24000000>;
-		clocks = <&clks IMX5_CLK_CKO2>;
-		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
-		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
-	};
-
-	usbphy3: usbphy-3 {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_3v3>;
-		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
-		clock-names = "main_clk";
-
-		clock-frequency = <24000000>;
-		clocks = <&clks IMX5_CLK_CKO2>;
-		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
-		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
-	};
-
-	panel-lvds0 {
-		compatible = "nvd,9128";
-		power-supply = <&reg_3v3_lcd>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&usbphy0 {
-	vcc-supply = <&reg_3v3>;
-};
-
-&usbphy1 {
-	vcc-supply = <&reg_3v3>;
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&cpu0 {
-	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
-	operating-points = <
-		/* kHz   uV */
-		166666  850000
-		400000  900000
-		800000  1050000
-		1000000 1200000
-	>;
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW
-		    &gpio4 10 GPIO_ACTIVE_LOW
-		    &gpio4 11 GPIO_ACTIVE_LOW
-		    &gpio4 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	spidev0: spi@1 {
-		compatible = "ge,achc", "nxp,kinetis-k20";
-		reg = <1>, <0>;
-		vdd-supply = <&reg_3v3>;
-		vdda-supply = <&reg_3v3>;
-		clocks = <&achc_24M>;
-		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-	};
-
-	gpioxra0: gpio@2 {
-		compatible = "exar,xra1403";
-		reg = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		spi-max-frequency = <1000000>;
-	};
-
-	gpioxra1: gpio@3 {
-		compatible = "exar,xra1403";
-		reg = <3>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		spi-max-frequency = <1000000>;
-	};
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	da9053@0 {
-		compatible = "dlg,da9053-aa";
-		reg = <0>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
-		spi-max-frequency = <1000000>;
-		dlg,tsi-as-adc;
-		tsiref-supply = <&reg_tsiref>;
-
-		regulators {
-			buck1_reg: buck1 {
-				regulator-name = "BUCKCORE";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <2075000>;
-				regulator-always-on;
-			};
-
-			buck2_reg: buck2 {
-				regulator-name = "BUCKPRO";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <2075000>;
-				regulator-always-on;
-			};
-
-			buck3_reg: buck3 {
-				regulator-name = "BUCKMEM";
-				regulator-min-microvolt = <925000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: buck4 {
-				regulator-name = "BUCKPERI";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
-			};
-
-			ldo1_reg: ldo1 {
-				regulator-name = "ldo1_1v3";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-name = "ldo2_1v3";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: ldo3 {
-				regulator-name = "ldo3_3v3";
-				regulator-min-microvolt = <1725000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ldo4 {
-				regulator-name = "ldo4_2v775";
-				regulator-min-microvolt = <1725000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: ldo5 {
-				regulator-name = "ldo5_3v3";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: ldo6 {
-				regulator-name = "ldo6_1v3";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: ldo7 {
-				regulator-name = "ldo7_2v75";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: ldo8 {
-				regulator-name = "ldo8_1v8";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: ldo9 {
-				regulator-name = "ldo9_1v5";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3650000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: ldo10 {
-				regulator-name = "ldo10_1v3";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-supply = <&reg_3v3>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9547";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
-
-		i2c4: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			sgtl5000: codec@a {
-				compatible = "fsl,sgtl5000";
-				reg = <0xa>;
-				#sound-dai-cells = <0>;
-				VDDA-supply = <&reg_sgtl5k>;
-				VDDIO-supply = <&reg_sgtl5k>;
-				clocks = <&cko2_11M>;
-				status = "okay";
-			};
-		};
-
-		i2c5: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			rtc@30 {
-			       compatible = "sii,s35390a";
-			       reg = <0x30>;
-			};
-
-			temp@48 {
-				compatible = "ti,tmp112";
-				reg = <0x48>;
-			};
-
-			mma8453q: accelerometer@1c {
-				compatible = "fsl,mma8453";
-				reg = <0x1c>;
-				interrupt-parent = <&gpio1>;
-				interrupts = <6 IRQ_TYPE_NONE>;
-				interrupt-names = "INT1";
-			};
-
-			mpl3115: pressure-sensor@60 {
-				compatible = "fsl,mpl3115";
-				reg = <0x60>;
-			};
-
-			eeprom: eeprom@50 {
-				compatible = "atmel,24c08";
-				reg = <0x50>;
-			};
-		};
-
-		i2c6: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c7: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		i2c8: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		i2c9: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		i2c10: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		i2c11: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	touchscreen@4b {
-		compatible = "atmel,maxtouch";
-		reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>;
-		reg = <0x4b>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		status = "okay";
-
-		port@2 {
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-};
-
-&pmu {
-	secure-reg-access;
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,dma-info = <24 20>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	fsl,dma-info = <4096 4>;
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "otg";
-	phy_type = "utmi";
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-0 = <&pinctrl_usb_otg>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbh2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh2>;
-	phy_type = "ulpi";
-	dr_mode = "host";
-	fsl,usbphy = <&usbphy2>;
-	vbus-supply = <&reg_usbh2_vbus>;
-	status = "okay";
-};
-
-&usbh3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh3>;
-	phy_type = "ulpi";
-	dr_mode = "host";
-	vbus-supply = <&reg_usbh3_vbus>;
-	fsl,usbphy = <&usbphy3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_rev6>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD	0x400
-			MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD	0x400
-			MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC	0x400
-			MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS	0x400
-			MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC	0x400
-			MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS	0x400
-			MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD	0x400
-			MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD	0x400
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX53_PAD_DISP0_DAT21__ECSPI1_MOSI	0x400
-			MX53_PAD_DISP0_DAT22__ECSPI1_MISO	0x400
-			MX53_PAD_DISP0_DAT20__ECSPI1_SCLK	0x400
-			/* ECSPI1_SS0, must treat as GPIO for EzPort */
-			MX53_PAD_DISP0_DAT23__GPIO5_17		0x400
-			MX53_PAD_KEY_COL2__GPIO4_10		0x0
-			MX53_PAD_KEY_ROW2__GPIO4_11		0x0
-			MX53_PAD_KEY_COL3__GPIO4_12		0x0
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX53_PAD_EIM_CS1__ECSPI2_MOSI		0x0
-			MX53_PAD_EIM_OE__ECSPI2_MISO		0x0
-			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0x0
-			MX53_PAD_EIM_RW__GPIO2_26		0x0
-		>;
-	};
-
-	pinctrl_esdhc1: esdhc1grp {
-		fsl,pins = <
-			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-		>;
-	};
-
-	pinctrl_esdhc3: esdhc3grp {
-		fsl,pins = <
-			MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-			MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-			MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-			MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-			MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-			MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-			MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-			MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-			MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-			MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX53_PAD_FEC_MDC__FEC_MDC		0x0
-			MX53_PAD_FEC_MDIO__FEC_MDIO		0x0
-			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x0
-			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x0
-			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x0
-			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x0
-			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x0
-			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x0
-			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x0
-			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x0
-		>;
-	};
-
-	pinctrl_hog_rev6: hoggrp {
-		fsl,pins = <
-			/* CKO2 */
-			MX53_PAD_GPIO_3__CCM_CLKO2		0x4
-			/* DEFIB_SYNC_MARKER_IN_IRQ */
-			MX53_PAD_GPIO_5__GPIO1_5		0x0
-			/* ACCELEROMETER_DATA_RDY_N */
-			MX53_PAD_GPIO_6__GPIO1_6		0x0
-			/* TEMPERATURE_ALERT_N */
-			MX53_PAD_GPIO_7__GPIO1_7		0x0
-			/* BAROMETRIC_PRESSURE_DATA_RDY_N */
-			MX53_PAD_GPIO_8__GPIO1_8		0x0
-			/* DOCKING_I2C_INTERFACE_IRQ_N */
-			MX53_PAD_PATA_DATA4__GPIO2_4		0x0
-			/* PWR_OUT_TO_DOCK_FAULT_N */
-			MX53_PAD_PATA_DATA5__GPIO2_5		0x0
-			/* ENABLE_PWR_TO_DOCK_N */
-			MX53_PAD_PATA_DATA6__GPIO2_6		0x0
-			/* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */
-			MX53_PAD_PATA_DATA7__GPIO2_7		0x0
-			/* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */
-			MX53_PAD_PATA_DATA12__GPIO2_12		0x0
-			/* DOCK_PRESENT_N */
-			MX53_PAD_PATA_DATA13__GPIO2_13		0x0
-			/* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */
-			MX53_PAD_PATA_DATA14__GPIO2_14		0x0
-			/* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */
-			MX53_PAD_PATA_DATA15__GPIO2_15		0x0
-			/* RESET_IMX535_ETHERNET_PHY_N */
-			MX53_PAD_EIM_A22__GPIO2_16		0x0
-			/* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */
-			MX53_PAD_EIM_A21__GPIO2_17		0x0
-			/* RESET_I2C1_BUS_SEGMENT_MUX_N */
-			MX53_PAD_EIM_A20__GPIO2_18		0x0
-			/* RESET_IMX535_USB_HOST3_PHY_N */
-			MX53_PAD_EIM_A19__GPIO2_19		0x0
-			/* ESDHC3_EMMC_NAND_RST_N */
-			MX53_PAD_EIM_A18__GPIO2_20		0x0
-			/* LCD_AND_UI_INTERFACE_PWR_FAULT_N */
-			MX53_PAD_EIM_A17__GPIO2_21		0x0
-			/* POWER_DOWN_LVDS0_DESERIALIZER_N */
-			MX53_PAD_EIM_A16__GPIO2_22		0x0
-			/* POWER_DOWN_LVDS1_DESERIALIZER_N */
-			MX53_PAD_EIM_LBA__GPIO2_27		0x0
-			/* RESET_DP0_TRANSMITTER_N */
-			MX53_PAD_EIM_EB0__GPIO2_28		0x0
-			/* RESET_DP1_TRANSMITTER_N */
-			MX53_PAD_EIM_EB1__GPIO2_29		0x0
-			/* ENABLE_SPDIF_AUDIO_TO_DP0 */
-			MX53_PAD_EIM_DA0__GPIO3_0		0x0
-			/* ENABLE_SPDIF_AUDIO_TO_DP1 */
-			MX53_PAD_EIM_DA1__GPIO3_1		0x0
-			/* LVDS1_MUX_CTRL */
-			MX53_PAD_EIM_DA2__GPIO3_2		0x0
-			/* LVDS0_MUX_CTRL */
-			MX53_PAD_EIM_DA3__GPIO3_3		0x0
-			/* DP1_TRANSMITTER_IRQ */
-			MX53_PAD_EIM_DA4__GPIO3_4		0x0
-			/* DP0_TRANSMITTER_IRQ */
-			MX53_PAD_EIM_DA5__GPIO3_5		0x0
-			/* USB_RESET_N */
-			MX53_PAD_EIM_DA6__GPIO3_6		0x0
-			/* ENABLE_BATTERY_CHARGER */
-			MX53_PAD_EIM_DA7__GPIO3_7		0x0
-			/* SOFTWARE_CONTROLLED_PWR_CYCLE */
-			MX53_PAD_EIM_DA8__GPIO3_8		0x0
-			/* SOFTWARE_CONTROLLED_POWERDOWN */
-			MX53_PAD_EIM_DA9__GPIO3_9		0x0
-			/* DC_PWR_IN_OK */
-			MX53_PAD_EIM_DA10__GPIO3_10		0x0
-			/* BATT_PRESENT_N */
-			MX53_PAD_EIM_DA11__GPIO3_11		0xe4
-			/* PMIC_IRQ_N */
-			MX53_PAD_EIM_DA12__GPIO3_12		0x0
-			/* PMIC_VDD_FAULT_STATUS_N */
-			MX53_PAD_EIM_DA13__GPIO3_13		0x0
-			/* IMX535_ETHERNET_PHY_STATUS_IRQ_N */
-			MX53_PAD_EIM_DA14__GPIO3_14		0x0
-			/* NOT USED - AVAILABLE 3.3V GPIO */
-			MX53_PAD_EIM_DA15__GPIO3_15		0x0
-			/* NOT USED - AVAILABLE 3.3V GPIO */
-			MX53_PAD_EIM_D22__GPIO3_22		0x0
-			/* NOT USED - AVAILABLE 3.3V GPIO */
-			MX53_PAD_EIM_D24__GPIO3_24		0x0
-			/* NBP_PUMP_VALVE_PWR_ENABLE */
-			MX53_PAD_EIM_D25__GPIO3_25		0x0
-			/* NIBP_RESET_N */
-			MX53_PAD_EIM_D26__GPIO3_26		0x0
-			/* LATCHED_OVERPRESSURE_N */
-			MX53_PAD_EIM_D27__GPIO3_27		0x0
-			/* NBP_SBWTCLK */
-			MX53_PAD_EIM_D29__GPIO3_29		0x0
-			/* ENABLE_WIFI_MODULE */
-			MX53_PAD_GPIO_11__GPIO4_1		0x400
-			/* WIFI_MODULE_IRQ_N */
-			MX53_PAD_GPIO_12__GPIO4_2		0x400
-			/* ENABLE_BLUETOOTH_MODULE */
-			MX53_PAD_GPIO_13__GPIO4_3		0x400
-			/* RESET_IMX535_USB_HOST2_PHY_N */
-			MX53_PAD_GPIO_14__GPIO4_4		0x400
-			/* ONKEY_IS_DEPRESSED */
-			MX53_PAD_KEY_ROW3__GPIO4_13		0x0
-			/* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */
-			MX53_PAD_EIM_WAIT__GPIO5_0		0x0
-			/* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */
-			MX53_PAD_EIM_A25__GPIO5_2		0x0
-			/* I2C_PCAP_TOUCHSCREEN_IRQ_N */
-			MX53_PAD_EIM_A24__GPIO5_4		0x0
-			/* NOT USED - AVAILABLE 1.8V GPIO */
-			MX53_PAD_DISP0_DAT13__GPIO5_7		0x400
-			/* NOT USED - AVAILABLE 1.8V GPIO */
-			MX53_PAD_DISP0_DAT14__GPIO5_8		0x400
-			/* NOT USED - AVAILABLE 1.8V GPIO */
-			MX53_PAD_DISP0_DAT15__GPIO5_9		0x400
-			/* HOST_CONTROLLED_RESET_TO_LCD_N */
-			MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x0
-			/* HOST_CONTROLLED_RESET_TO_PCAP_N */
-			MX53_PAD_CSI0_MCLK__GPIO5_19		0x0
-			/* LR_SCAN_CTRL */
-			MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x0
-			/* UD_SCAN_CTRL */
-			MX53_PAD_CSI0_VSYNC__GPIO5_21		0x0
-			/* DATA_WIDTH_CTRL */
-			MX53_PAD_CSI0_DAT10__GPIO5_28		0x0
-			/* BACKLIGHT_ENABLE */
-			MX53_PAD_CSI0_DAT11__GPIO5_29		0x0
-			/* MED_USB_PORT_1_HOST_SELECT */
-			MX53_PAD_EIM_A23__GPIO6_6		0x0
-			/* MED_USB_PORT_2_HOST_SELECT */
-			MX53_PAD_NANDF_CLE__GPIO6_7		0x0
-			/* MED_USB_PORT_3_HOST_SELECT */
-			MX53_PAD_NANDF_ALE__GPIO6_8		0x0
-			/* MED_USB_PORT_4_HOST_SELECT */
-			MX53_PAD_NANDF_WP_B__GPIO6_9		0x0
-			/* MED_USB_PORT_5_HOST_SELECT */
-			MX53_PAD_NANDF_RB0__GPIO6_10		0x0
-			/* MED_USB_PORT_6_HOST_SELECT */
-			MX53_PAD_NANDF_CS0__GPIO6_11		0x0
-			/* MED_USB_PORT_7_HOST_SELECT */
-			MX53_PAD_NANDF_WE_B__GPIO6_12		0x0
-			/* MED_USB_PORT_8_HOST_SELECT */
-			MX53_PAD_NANDF_RE_B__GPIO6_13		0x0
-			/* MED_USB_PORT_TO_IMX_SELECT_0 */
-			MX53_PAD_NANDF_CS1__GPIO6_14		0x0
-			/* MED_USB_PORT_TO_IMX_SELECT_1 */
-			MX53_PAD_NANDF_CS2__GPIO6_15		0x0
-			/* MED_USB_PORT_TO_IMX_SELECT_2 */
-			MX53_PAD_NANDF_CS3__GPIO6_16		0x0
-			/* POWER_AND_BOOT_STATUS_INDICATOR */
-			MX53_PAD_PATA_INTRQ__GPIO7_2		0x1e4
-			/* RUNNING_ON_BATTERY_INDICATOR_GREEN */
-			MX53_PAD_GPIO_16__GPIO7_11		0x0
-			/* BATTERY_STATUS_INDICATOR_AMBER */
-			MX53_PAD_GPIO_17__GPIO7_12		0x0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
-			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1gpiogrp {
-		fsl,pins = <
-			MX53_PAD_EIM_D28__GPIO3_28		0x1e4
-			MX53_PAD_EIM_D21__GPIO3_21		0x1e4
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX53_PAD_EIM_EB2__I2C2_SCL		0x400001e4
-			MX53_PAD_EIM_D16__I2C2_SDA		0x400001e4
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2gpiogrp {
-		fsl,pins = <
-			MX53_PAD_EIM_D16__GPIO3_16		0x1e4
-			MX53_PAD_EIM_EB2__GPIO2_30		0x1e4
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX53_PAD_EIM_D17__I2C3_SCL		0x400001e4
-			MX53_PAD_EIM_D18__I2C3_SDA		0x400001e4
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3gpiogrp {
-		fsl,pins = <
-			MX53_PAD_EIM_D18__GPIO3_18		0x1e4
-			MX53_PAD_EIM_D17__GPIO3_17		0x1e4
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX53_PAD_GPIO_9__PWM1_PWMO		0x5
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX53_PAD_DISP0_DAT9__PWM2_PWMO		0x5
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-			MX53_PAD_EIM_D23__UART3_CTS		0x1e4
-			MX53_PAD_EIM_EB3__UART3_RTS		0x1e4
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX53_PAD_KEY_COL0__UART4_TXD_MUX	0x1e4
-			MX53_PAD_KEY_ROW0__UART4_RXD_MUX	0x1e4
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX53_PAD_KEY_COL1__UART5_TXD_MUX	0x1e4
-			MX53_PAD_KEY_ROW1__UART5_RXD_MUX	0x1e4
-		>;
-	};
-
-	pinctrl_usb_otg_vbus: usb-otg-vbusgrp {
-		fsl,pins = <
-			/* USB_HS_OTG_VBUS_ENABLE */
-			MX53_PAD_KEY_ROW4__GPIO4_15		0x1c4
-		>;
-	};
-
-	pinctrl_usbh2: usbh2grp {
-		fsl,pins = <
-			/* USB H2 */
-			MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180
-			MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180
-			MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180
-			MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180
-			MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180
-			MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180
-			MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180
-			MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180
-			MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP	 0x180
-			MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT	 0x180
-			MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK	 0x180
-			MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR	 0x5
-			MX53_PAD_EIM_D30__USBOH3_USBH2_OC	 0x180
-		>;
-	};
-
-	pinctrl_usbh2_vbus: usbh2-vbusgrp {
-		fsl,pins = <
-			/* USB_HS_HOST2_VBUS_ENABLE */
-			MX53_PAD_EIM_D31__GPIO3_31		0x0
-		>;
-	};
-
-	pinctrl_usbh3_vbus: usbh3-vbusgrp {
-		fsl,pins = <
-			/* USB_HS_HOST3_VBUS_ENABLE */
-			MX53_PAD_CSI0_DAT9__GPIO5_27		0x0
-		>;
-	};
-
-	pinctrl_usbh3: usbh3grp {
-		fsl,pins = <
-			/* USB H3 */
-			MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180
-			MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180
-			MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180
-			MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180
-			MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180
-			MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180
-			MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180
-			MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180
-			MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR	 0x5
-			MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK	 0x180
-			MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT	 0x180
-			MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP	 0x180
-			MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC	 0x180
-		>;
-	};
-
-	pinctrl_usb_otg: usbotggrp {
-		fsl,pins = <
-			/* USB_OTG_FAULT_N */
-			MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC	0x180
-		>;
-	};
-
-	pinctrl_alarmled_pins: qmx6alarmledgrp {
-		fsl,pins = <
-			/* ACTIVATE_ALARM_LIGHT_RED */
-			MX53_PAD_PATA_DIOR__GPIO7_3		0x0
-			/* ACTIVATE_ALARM_LIGHT_YELLOW */
-			MX53_PAD_PATA_DA_1__GPIO7_7		0x0
-			/* ACTIVATE_ALARM_LIGHT_CYAN */
-			MX53_PAD_PATA_DA_2__GPIO7_8		0x0
-			/* AUDIO_ALARMS_SILENCED_INDICATOR */
-			MX53_PAD_GPIO_18__GPIO7_13		0x0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
deleted file mode 100644
index 50fef8dd3675b..0000000000000
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ /dev/null
@@ -1,387 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include "imx53.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	display0: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp0>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		port@0 {
-			reg = <0>;
-
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-power {
-			label = "Power Button";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio7_7>;
-
-		led-user {
-			label = "Heartbeat";
-			gpios = <&gpio7 7 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p2v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-
-		reg_usb_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio7 8 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx53-qsb-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-qsb-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-};
-
-&cpu0 {
-	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
-	operating-points = <
-		/* kHz   uV */
-		166666  850000
-		400000  900000
-		800000  1050000
-		1000000 1200000
-	>;
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ipu_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-qsb {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
-				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
-				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
-				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
-				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
-				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
-				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
-			>;
-		};
-
-		led_pin_gpio7_7: led_gpio7_7 {
-			fsl,pins = <
-				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_codec: codecgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-				MX53_PAD_EIM_DA13__GPIO3_13		0xe4
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x4
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
-			>;
-		};
-
-		/* open drain */
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
-				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_disp0: ipudisp0grp {
-			fsl,pins = <
-				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
-				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
-				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
-				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
-				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
-				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
-				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
-				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
-				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
-				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
-				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
-				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
-				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
-				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
-				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
-				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
-				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
-				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
-				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
-				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
-				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
-				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
-				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
-				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
-				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
-				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
-				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
-				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
-			>;
-		};
-
-		pinctrl_vga_sync: vgasync-grp {
-			fsl,pins = <
-				/* VGA_HSYNC, VSYNC with max drive strength */
-				MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
-				MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
-				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&tve {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_vga_sync>;
-	ddc-i2c-bus = <&i2c2>;
-	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
-	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	accelerometer: mma8450@1c {
-		compatible = "fsl,mma8450";
-		reg = <0x1c>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&vpu {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
deleted file mode 100644
index 6831836bd726c..0000000000000
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-#include "imx53-qsb-common.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Quick Start Board";
-	compatible = "fsl,imx53-qsb", "fsl,imx53";
-};
-
-&i2c1 {
-	pmic: dialog@48 {
-		compatible = "dlg,da9053-aa", "dlg,da9052";
-		reg = <0x48>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
-
-		regulators {
-			buck1_reg: buck1 {
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <2075000>;
-				regulator-always-on;
-			};
-
-			buck2_reg: buck2 {
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <2075000>;
-				regulator-always-on;
-			};
-
-			buck3_reg: buck3 {
-				regulator-min-microvolt = <925000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: buck4 {
-				regulator-min-microvolt = <925000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			ldo1_reg: ldo1 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: ldo3 {
-				regulator-min-microvolt = <1725000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ldo4 {
-				regulator-min-microvolt = <1725000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: ldo5 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: ldo6 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: ldo7 {
-				regulator-min-microvolt = <2750000>;
-				regulator-max-microvolt = <2750000>;
-			};
-
-			ldo8_reg: ldo8 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: ldo9 {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: ldo10 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&tve {
-	dac-supply = <&ldo7_reg>;
-};
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
deleted file mode 100644
index 1bbf24ad308a1..0000000000000
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-
-#include "imx53-qsb-common.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Quick Start-R Board";
-	compatible = "fsl,imx53-qsrb", "fsl,imx53";
-};
-
-&iomuxc {
-	imx53-qsrb {
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1c4 /* IRQ */
-			>;
-		};
-	};
-};
-
-&i2c1 {
-	pmic: mc34708@8 {
-		compatible = "fsl,mc34708";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		reg = <0x08>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
-		regulators {
-			sw1_reg: sw1a {
-				regulator-name = "SW1";
-				regulator-min-microvolt = <650000>;
-				regulator-max-microvolt = <1437500>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw1b_reg: sw1b {
-				regulator-name = "SW1B";
-				regulator-min-microvolt = <650000>;
-				regulator-max-microvolt = <1437500>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-name = "SW2";
-				regulator-min-microvolt = <650000>;
-				regulator-max-microvolt = <1437500>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-name = "SW3";
-				regulator-min-microvolt = <650000>;
-				regulator-max-microvolt = <1425000>;
-				regulator-boot-on;
-			};
-
-			sw4a_reg: sw4a {
-				regulator-name = "SW4A";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4b_reg: sw4b {
-				regulator-name = "SW4B";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw5_reg: sw5 {
-				regulator-name = "SW5";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-name = "SWBST";
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-name = "VPLL";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-			};
-
-			vrefddr_reg: vrefddr {
-				regulator-name = "VREFDDR";
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vusb_reg: vusb {
-				regulator-name = "VUSB";
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-name = "VUSB2";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vdac_reg: vdac {
-				regulator-name = "VDAC";
-				regulator-min-microvolt = <2750000>;
-				regulator-max-microvolt = <2750000>;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-name = "VGEN1";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-name = "VGEN2";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&tve {
-	dac-supply = <&vdac_reg>;
-};
diff --git a/arch/arm/boot/dts/imx53-sk-imx53.dts b/arch/arm/boot/dts/imx53-sk-imx53.dts
deleted file mode 100644
index 103e73176e47d..0000000000000
--- a/arch/arm/boot/dts/imx53-sk-imx53.dts
+++ /dev/null
@@ -1,357 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2023 Linaro Ltd.
-
-/dts-v1/;
-
-#include "imx53.dtsi"
-
-/ {
-	model = "StarterKit SK-iMX53 Board";
-	compatible = "starterkit,sk-imx53", "fsl,imx53";
-
-	aliases {
-		/*
-		 * iMX RTC is not battery powered on this board.
-		 * Use the i2c RTC as rtc0.
-		 */
-		rtc0 = &rtc;
-		rtc1 = &srtc;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@70000000 {
-		device_type = "memory";
-		/* v2 had only 256 MB, v3 has 512 MB */
-		reg = <0x70000000 0x20000000>;
-	};
-
-	reg_usb1_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg_vbus: regulator-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&esdhc1 {
-	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-handle = <&phy0>;
-	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec>;
-		#sound-dai-cells = <0>;
-	};
-
-	rtc: rtc@68 {
-		compatible = "dallas,ds1338";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x1e4
-			MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x1e4
-			MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x1e4
-			MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x1e4
-		>;
-	};
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX53_PAD_PATA_INTRQ__CAN1_TXCAN		0x1e4
-			MX53_PAD_PATA_DIOR__CAN1_RXCAN		0x1e4
-		>;
-	};
-
-	pinctrl_codec: codecgrp {
-		fsl,pins = <
-			MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x1e4
-			MX53_PAD_EIM_D17__ECSPI1_MISO		0x1e4
-			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x1e4
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX53_PAD_CSI0_DAT9__ECSPI2_MOSI		0x1e4
-			MX53_PAD_CSI0_DAT10__ECSPI2_MISO	0x1e4
-			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0x1e4
-		>;
-	};
-
-	pinctrl_esdhc1: esdhc1grp {
-		fsl,pins = <
-			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			MX53_PAD_EIM_DA14__GPIO3_14		0x1f0
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
-			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
-			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
-			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
-			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
-			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
-			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
-			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
-			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
-			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
-			MX53_PAD_GPIO_1__GPIO1_1		0x1c4
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
-			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX53_PAD_KEY_ROW3__I2C2_SDA             0x400001e4
-			MX53_PAD_EIM_EB2__I2C2_SCL		0x400001e4
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2gpiogrp {
-		fsl,pins = <
-			MX53_PAD_KEY_ROW3__GPIO4_13		0x1e4
-			MX53_PAD_EIM_EB2__GPIO2_30		0x1e4
-		>;
-	};
-
-	pinctrl_nand: nandgrp {
-		fsl,pins = <
-			MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-			MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-			MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-			MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-			MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-			MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-			MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-			MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1	0x4
-			MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2	0x4
-			MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3	0x4
-			MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
-			MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
-			MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
-			MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
-			MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
-			MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
-			MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
-			MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX53_PAD_GPIO_9__PWM1_PWMO		0x5
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX53_PAD_EIM_D24__UART3_TXD_MUX		0x1e4
-			MX53_PAD_EIM_D25__UART3_RXD_MUX		0x1e4
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX53_PAD_KEY_COL0__UART4_TXD_MUX	0x1e4
-			MX53_PAD_KEY_ROW0__UART4_RXD_MUX	0x1e4
-		>;
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	status = "okay";
-
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00100000>;
-			read-only;
-		};
-
-		partition@100000 {
-			label = "u-boot";
-			reg = <0x00100000 0x00100000>;
-			read-only;
-		};
-
-		partition@200000 {
-			label = "u-boot-env";
-			reg = <0x00200000 0x00100000>;
-			read-only;
-		};
-
-		partition@1000000 {
-			label = "kernel-safe";
-			reg = <0x01000000 0x00a00000>;
-			read-only;
-		};
-
-		partition@1a00000 {
-			label = "kernel";
-			reg = <0x01a00000 0x005e0000>;
-		};
-
-		partition@2000000 {
-			label = "ubifs";
-			reg = <0x02000000 0x0e000000>;
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	phy_type = "utmi";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
deleted file mode 100644
index f8d17967a67ef..0000000000000
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ /dev/null
@@ -1,346 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Smart Mobile Reference Design Board";
-	compatible = "fsl,imx53-smd", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x40000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 0>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 0>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	non-removable;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	zigbee: mc1323@0 {
-		compatible = "fsl,mc1323";
-		spi-max-frequency = <8000000>;
-		reg = <0>;
-	};
-
-	flash: m25p32@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "Kernel";
-			reg = <0x40000 0x3c0000>;
-		};
-	};
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-smd {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
-				MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
-				MX53_PAD_EIM_EB2__GPIO2_30     0x80000000
-				MX53_PAD_EIM_DA13__GPIO3_13    0x80000000
-				MX53_PAD_EIM_D19__GPIO3_19     0x80000000
-				MX53_PAD_KEY_ROW2__GPIO4_11    0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6    0x80000000
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
-				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_csi0: ipucsi0grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12    0x1c4
-				MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13    0x1c4
-				MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14    0x1c4
-				MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15    0x1c4
-				MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16    0x1c4
-				MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17    0x1c4
-				MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18    0x1c4
-				MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19    0x1c4
-				MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4
-				MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC   0x1e4
-				MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC    0x1e4
-				MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4
-			>;
-		};
-
-		pinctrl_ov5642: ov5642grp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WP_B__GPIO6_9   0x1e4
-				MX53_PAD_NANDF_RB0__GPIO6_10   0x1e4
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
-				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-	};
-
-	magnetometer: mag3110@e {
-		compatible = "fsl,mag3110";
-		reg = <0x0e>;
-	};
-
-	touchkey: mpr121@5a {
-		compatible = "fsl,mpr121";
-		reg = <0x5a>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	accelerometer: mma8450@1c {
-		compatible = "fsl,mma8450";
-		reg = <0x1c>;
-	};
-
-	camera: ov5642@3c {
-		compatible = "ovti,ov5642";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5642>;
-		assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>,
-				  <&clks IMX5_CLK_SSI_EXT1_COM_SEL>;
-		assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>,
-					 <&clks IMX5_CLK_SSI_EXT1_PODF>;
-		assigned-clock-rates = <0>, <24000000>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-		clock-names = "xclk";
-		DVDD-supply = <&ldo9_reg>;
-		AVDD-supply = <&ldo7_reg>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
-		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
-
-		port {
-			ov5642_to_ipu_csi0: endpoint {
-				remote-endpoint = <&ipu_csi0_from_parallel_sensor>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-
-	pmic: dialog@48 {
-		compatible = "dlg,da9053", "dlg,da9052";
-		reg = <0x48>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
-		regulators {
-			ldo7_reg: ldo7 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-			};
-
-			ldo9_reg: ldo9 {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3650000>;
-			};
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ipu_csi0_from_parallel_sensor {
-	remote-endpoint = <&ov5642_to_ipu_csi0>;
-	data-shift = <12>; /* Lines 19:12 used */
-	hsync-active = <1>;
-	vsync-active = <1>;
-};
-
-&ipu_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu_csi0>;
-};
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
deleted file mode 100644
index 7e7f9f3b3906e..0000000000000
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ /dev/null
@@ -1,289 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "TQ TQMa53";
-	compatible = "tq,tqma53", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>,
-		    <&pinctrl_esdhc2_cdwp>;
-	vmmc-supply = <&reg_3p3v>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "disabled";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
-		   <&gpio3 24 GPIO_ACTIVE_LOW>, <&gpio3 25 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&esdhc3 { /* EMMC */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-tqma53 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
-				 MX53_PAD_PATA_DA_1__GPIO7_7     0x80000000 /* LCD_BLT_EN */
-				 MX53_PAD_PATA_DA_2__GPIO7_8     0x80000000 /* LCD_RESET */
-				 MX53_PAD_PATA_DATA5__GPIO2_5    0x80000000 /* LCD_POWER */
-				 MX53_PAD_PATA_DATA6__GPIO2_6    0x80000000 /* PMIC_INT */
-				 MX53_PAD_PATA_DATA14__GPIO2_14  0x80000000 /* CSI_RST */
-				 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* CSI_PWDN */
-				 MX53_PAD_GPIO_19__GPIO4_5 	 0x80000000 /* #SYSTEM_DOWN */
-				 MX53_PAD_GPIO_3__GPIO1_3        0x80000000
-				 MX53_PAD_PATA_DA_0__GPIO7_6	 0x80000000 /* #PHY_RESET */
-				 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL2__CAN1_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW2__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_cspi: cspigrp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__CSPI_MISO		0x1d5
-				MX53_PAD_SD1_CMD__CSPI_MOSI		0x1d5
-				MX53_PAD_SD1_CLK__CSPI_SCLK		0x1d5
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc2_cdwp: esdhc2cdwp {
-			fsl,pins = <
-				MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
-				MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "disabled";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "disabled";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "disabled";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "disabled";
-};
-
-&cspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi>;
-	cs-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>, <&gpio1 19 GPIO_ACTIVE_LOW>,
-		   <&gpio1 21 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: mc34708@8 {
-		compatible = "fsl,mc34708";
-		reg = <0x8>;
-		fsl,mc13xxx-uses-rtc;
-		interrupt-parent = <&gpio2>;
-		interrupts = <6 4>; /* PATA_DATA6, active high */
-	};
-
-	sensor1: lm75@48 {
-		compatible = "lm75";
-		reg = <0x48>;
-	};
-
-	eeprom: 24c64@50 {
-		compatible = "atmel,24c64";
-		pagesize = <32>;
-		reg = <0x50>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
deleted file mode 100644
index a7f77527269d5..0000000000000
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx53-tx53.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module (LCD)";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	aliases {
-		display = &display;
-	};
-
-	display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rgb24_vga1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	reg_lcd_pwr: regulator-lcd-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	reg_lcd_reset: regulator-lcd-reset {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD RESET";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_2v5>;
-		VDDIO-supply = <&reg_3v3>;
-		clocks = <&mclk>;
-	};
-
-	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-
-	touchscreen: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
-		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-		ti,x-plate-ohms = <660>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	imx53-tx53-x03x {
-		pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 {
-			fsl,pins = <
-				MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
-				MX53_PAD_EIM_A16__GPIO2_22   0x04 /* Reset */
-				MX53_PAD_EIM_A17__GPIO2_21   0x04 /* Wake */
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
-				MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
-				MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
-				MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
-				MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
-				MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
-				MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
-				MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
-			>;
-		};
-
-		pinctrl_rgb24_vga1: rgb24-vgagrp1 {
-			fsl,pins = <
-				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		0x5
-				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
-				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			0x5
-				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			0x5
-				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
-				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
-				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
-				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
-				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
-				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
-				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
-				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
-				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
-				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
-				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
-				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
-				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
-				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
-				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
-				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
-				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
-				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
-				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
-				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
-				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
-				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
-				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
-				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
-			>;
-		};
-
-		pinctrl_tsc2007: tsc2007grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&ipu_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	/* sample keymap */
-	/* row/col 0,1 are mapped to KPP row/col 6,7 */
-	linux,keymap = <
-		MATRIX_KEY(6, 6, KEY_POWER)
-		MATRIX_KEY(6, 7, KEY_KP0)
-		MATRIX_KEY(6, 2, KEY_KP1)
-		MATRIX_KEY(6, 3, KEY_KP2)
-		MATRIX_KEY(7, 6, KEY_KP3)
-		MATRIX_KEY(7, 7, KEY_KP4)
-		MATRIX_KEY(7, 2, KEY_KP5)
-		MATRIX_KEY(7, 3, KEY_KP6)
-		MATRIX_KEY(2, 6, KEY_KP7)
-		MATRIX_KEY(2, 7, KEY_KP8)
-		MATRIX_KEY(2, 2, KEY_KP9)
-	>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
deleted file mode 100644
index 6cdf2082c742c..0000000000000
--- a/arch/arm/boot/dts/imx53-tx53-x13x.dts
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53-tx53.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module (LVDS)";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	reg_lcd_pwr0: regulator-lvds0-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LVDS0 POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	reg_lcd_pwr1: regulator-lvds1-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LVDS1 POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_2v5>;
-		VDDIO-supply = <&reg_3v3>;
-		clocks = <&mclk>;
-	};
-};
-
-&iomuxc {
-	imx53-tx53-x13x {
-		pinctrl_lvds0: lvds0grp {
-			fsl,pins = <
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_lvds1: lvds1grp {
-			fsl,pins = <
-				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
-				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
-				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
-				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
-				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
-		};
-
-		pinctrl_eeti1: eeti1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
-			>;
-		};
-
-		pinctrl_eeti2: eeti2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds0_timing0>;
-
-			lvds0_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hsync-len = <60>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vsync-len = <10>;
-				vfront-porch = <7>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			lvds0_timing1: nl12880bc20 {
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hsync-len = <60>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vsync-len = <13>;
-				vfront-porch = <5>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds1_timing0>;
-
-			lvds1_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hsync-len = <60>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vsync-len = <10>;
-				vfront-porch = <7>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
deleted file mode 100644
index a439a47fb65ac..0000000000000
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- * Copyright 2012-2017 <LW@KARO-electronics.de>
- * based on imx53-qsb.dts
- *   Copyright 2011 Freescale Semiconductor, Inc.
- *   Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx53.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	/* Will be filled by the bootloader */
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0>;
-	};
-
-	aliases {
-		can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
-		can1 = &can1;
-		ipu = &ipu;
-		reg-can-xcvr = &reg_can_xcvr;
-		usbh1 = &usbh1;
-		usbotg = &usbotg;
-	};
-
-	clocks {
-		ckih1 {
-			clock-frequency = <0>;
-		};
-	};
-
-	mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_key>;
-
-		key-power {
-			label = "Power Button";
-			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <116>; /* KEY_POWER */
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_stk5led>;
-
-		led-user {
-			label = "Heartbeat";
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_2v5: regulator-2v5 {
-		compatible = "regulator-fixed";
-		regulator-name = "2V5";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_can_xcvr: regulator-can-xcvr {
-		compatible = "regulator-fixed";
-		regulator-name = "CAN XCVR";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can_xcvr>;
-		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbh1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1_vbus>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usbotg_vbus: regulator-usbotg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbotg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg_vbus>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
-		model = "tx53-audio-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		/* '1' based port numbers according to datasheet names */
-		mux-int-port = <1>;
-		mux-ext-port = <5>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ssi1>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	cs-gpios = <
-		&gpio2 30 GPIO_ACTIVE_HIGH
-		&gpio3 19 GPIO_ACTIVE_HIGH
-	>;
-
-};
-
-&esdhc1 {
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&esdhc2 {
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	phy-handle = <&phy0>;
-	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			interrupt-parent = <&gpio2>;
-			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-			device_type = "ethernet-phy";
-		};
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-0 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	rtc1: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ds1339>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
-		trickle-resistor-ohms = <250>;
-		trickle-diode-disable;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-tx53 {
-		pinctrl_hog: hoggrp {
-			/* pins not in use by any device on the Starterkit board series */
-			fsl,pins = <
-				/* CMOS Sensor Interface */
-				MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
-				MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
-				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
-				MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
-				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
-				MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
-				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
-				MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
-				MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
-				MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
-				MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
-				MX53_PAD_GPIO_0__GPIO1_0 0x1f4
-				/* Module Specific Signal */
-				/* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
-				/* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
-				MX53_PAD_EIM_D29__GPIO3_29 0x1f4
-				MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
-				/* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
-				/* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
-				MX53_PAD_EIM_A19__GPIO2_19 0x1f4
-				MX53_PAD_EIM_A20__GPIO2_18 0x1f4
-				MX53_PAD_EIM_A21__GPIO2_17 0x1f4
-				MX53_PAD_EIM_A22__GPIO2_16 0x1f4
-				MX53_PAD_EIM_A23__GPIO6_6 0x1f4
-				MX53_PAD_EIM_A24__GPIO5_4 0x1f4
-				MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
-				MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
-				MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
-				MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
-				/* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
-				/* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
-				MX53_PAD_GPIO_13__GPIO4_3 0x1f4
-				MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
-				MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
-				MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
-				MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
-				MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
-				MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
-				MX53_PAD_EIM_OE__GPIO2_25 0x1f4
-				MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
-				MX53_PAD_EIM_RW__GPIO2_26 0x1f4
-				MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
-				MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
-				MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
-				MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
-				MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
-				MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
-				MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
-				MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
-				>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
-		};
-
-		pinctrl_ds1339: ds1339grp {
-			fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_19__ECSPI1_RDY		0x80000000
-				MX53_PAD_EIM_EB2__ECSPI1_SS0		0x80000000
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-				MX53_PAD_EIM_D19__ECSPI1_SS1		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-				MX53_PAD_EIM_D24__GPIO3_24 0x1f0
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-				MX53_PAD_EIM_D25__GPIO3_25 0x1f0
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_gpio_key: gpio-keygrp {
-			fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
-				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
-			>;
-		};
-
-		pinctrl_i2c1_gpio: i2c1-gpiogrp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__GPIO3_21		0x400001e6
-				MX53_PAD_EIM_D28__GPIO3_28		0x400001e6
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__I2C3_SCL		0x400001e4
-				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
-			>;
-		};
-
-		pinctrl_i2c3_gpio: i2c3-gpiogrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__GPIO1_3		0x400001e6
-				MX53_PAD_GPIO_6__GPIO1_6		0x400001e6
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
-				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
-				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
-				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
-				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
-				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
-				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
-				MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_1__PWM2_PWMO		0x80000000
-			>;
-		};
-
-		pinctrl_ssi1: ssi1grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_ssi2: ssi2grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC	0x80000000
-				MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD	0x80000000
-				MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS	0x80000000
-				MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD	0x80000000
-				MX53_PAD_EIM_D27__GPIO3_27 0x1f0
-			>;
-		};
-
-		pinctrl_stk5led: stk5ledgrp {
-			fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1c5
-				MX53_PAD_PATA_IORDY__UART1_RTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1c5
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1c5
-				MX53_PAD_PATA_DIOR__UART2_RTS		0x1c5
-				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
-			>;
-		};
-
-		pinctrl_usbh1_vbus: usbh1-vbusgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
-			>;
-		};
-
-		pinctrl_usbotg_vbus: usbotg-vbusgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
-				MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
-			>;
-		};
-	};
-};
-
-&ipu {
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-};
-
-&sdma {
-	fsl,sdma-ram-script-name = "sdma-imx53.bin";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	phy_type = "utmi";
-	disable-over-current;
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "peripheral";
-	disable-over-current;
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts
deleted file mode 100644
index acc44010d5106..0000000000000
--- a/arch/arm/boot/dts/imx53-usbarmory.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * USB armory MkI device tree file
- * https://inversepath.com/usbarmory
- *
- * Copyright (C) 2015, Inverse Path
- * Andrej Rosano <andrej@inversepath.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx53.dtsi"
-
-/ {
-	model = "Inverse Path USB armory";
-	compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
-};
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led-user {
-			label = "LED";
-			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-/*
- * Not every i.MX53 P/N supports clock > 800MHz.
- * As USB armory does not mount a specific P/N set a safe clock upper limit.
- */
-&cpu0 {
-	operating-points = <
-		/* kHz */
-		166666  850000
-		400000  900000
-		800000 1050000
-	>;
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_esdhc1: esdhc1grp {
-		fsl,pins = <
-			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-		>;
-	};
-
-	pinctrl_i2c1_pmic: i2c1grp {
-		fsl,pins = <
-			MX53_PAD_EIM_D21__I2C1_SCL	0x80
-			MX53_PAD_EIM_D28__I2C1_SDA	0x80
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX53_PAD_DISP0_DAT6__GPIO4_27 0x1e4
-		>;
-	};
-
-	/*
-	 * UART mode pin header configuration
-	 * 3 - GPIO5[26], pull-down 100K
-	 * 4 - GPIO5[27], pull-down 100K
-	 * 5 - TX, pull-up 100K
-	 * 6 - RX, pull-up 100K
-	 * 7 - GPIO5[30], pull-down 100K
-	 */
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX53_PAD_CSI0_DAT8__GPIO5_26		0xc0
-			MX53_PAD_CSI0_DAT9__GPIO5_27		0xc0
-			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
-			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
-			MX53_PAD_CSI0_DAT12__GPIO5_30		0xc0
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-0 = <&pinctrl_i2c1_pmic>;
-	status = "okay";
-
-	ltc3589: pmic@34 {
-		compatible = "lltc,ltc3589-2";
-		reg = <0x34>;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <591930>;
-				regulator-max-microvolt = <1224671>;
-				lltc,fb-voltage-divider = <100000 158000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <704123>;
-				regulator-max-microvolt = <1456803>;
-				lltc,fb-voltage-divider = <180000 191000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1341250>;
-				regulator-max-microvolt = <2775000>;
-				lltc,fb-voltage-divider = <270000 100000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			bb_out_reg: bb-out {
-				regulator-min-microvolt = <3387341>;
-				regulator-max-microvolt = <3387341>;
-				lltc,fb-voltage-divider = <511000 158000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo1_reg: ldo1 {
-				regulator-min-microvolt = <1306329>;
-				regulator-max-microvolt = <1306329>;
-				lltc,fb-voltage-divider = <100000 158000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-min-microvolt = <704123>;
-				regulator-max-microvolt = <1456806>;
-				lltc,fb-voltage-divider = <180000 191000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo3_reg: ldo3 {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-boot-on;
-			};
-
-			ldo4_reg: ldo4 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3200000>;
-			};
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
deleted file mode 100644
index ae53d178a6830..0000000000000
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
- */
-
-/dts-v1/;
-#include "imx53-voipac-dmm-668.dtsi"
-
-/ {
-	sound {
-		compatible = "fsl,imx53-voipac-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-voipac-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio>;
-
-		led1 {
-			label = "led-red";
-			gpios = <&gpio3 29 0>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "led-orange";
-			gpios = <&gpio2 31 0>;
-			default-state = "off";
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-voipac {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SD2_CD */
-				MX53_PAD_EIM_D25__GPIO3_25	0x80000000
-				/* SD2_WP */
-				MX53_PAD_EIM_A19__GPIO2_19 	0x80000000
-			>;
-		};
-
-		led_pin_gpio: led_gpio {
-			fsl,pins = <
-				MX53_PAD_EIM_D29__GPIO3_29	0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31	0x80000000
-			>;
-		};
-
-		/* Keyboard controller */
-		pinctrl_kpp_1: kppgrp-1 {
-			fsl,pins = <
-				MX53_PAD_GPIO_9__KPP_COL_6	0xe8
-				MX53_PAD_GPIO_4__KPP_COL_7	0xe8
-				MX53_PAD_KEY_COL2__KPP_COL_2	0xe8
-				MX53_PAD_KEY_COL3__KPP_COL_3	0xe8
-				MX53_PAD_KEY_COL4__KPP_COL_4	0xe8
-				MX53_PAD_GPIO_2__KPP_ROW_6	0xe0
-				MX53_PAD_GPIO_5__KPP_ROW_7	0xe0
-				MX53_PAD_KEY_ROW2__KPP_ROW_2	0xe0
-				MX53_PAD_KEY_ROW3__KPP_ROW_3	0xe0
-				MX53_PAD_KEY_ROW4__KPP_ROW_4	0xe0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-			>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>; /* SSI1 */
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&clks 150>;
-	};
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp_1>;
-	linux,keymap = <
-			0x0203003b	/* KEY_F1 */
-			0x0603003c	/* KEY_F2 */
-			0x0207003d	/* KEY_F3 */
-			0x0607003e	/* KEY_F4 */
-			>;
-	keypad,num-rows = <8>;
-	keypad,num-columns = <1>;
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
deleted file mode 100644
index 24859d0c09c1c..0000000000000
--- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
+++ /dev/null
@@ -1,267 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "Voipac i.MX53 X53-DMM-668";
-	compatible = "voipac,imx53-dmm-668", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 31 0>; /* PEN */
-			enable-active-high;
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-voipac {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* Make DA9053 regulator functional */
-				MX53_PAD_GPIO_16__GPIO7_11	0x80000000
-				/* FEC Power enable */
-				MX53_PAD_GPIO_11__GPIO4_1	0x80000000
-				/* FEC RST */
-				MX53_PAD_GPIO_12__GPIO4_2	0x80000000
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
-				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
-				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
-				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
-				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
-				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
-				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
-				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
-				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
-			>;
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
-		   <&gpio2 16 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: dialog@48 {
-		compatible = "dlg,da9053-aa", "dlg,da9052";
-		reg = <0x48>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
-
-		regulators {
-			buck1_reg: buck1 {
-				regulator-name = "BUCKCORE";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-			};
-
-			buck2_reg: buck2 {
-				regulator-name = "BUCKPRO";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck3_reg: buck3 {
-				regulator-name = "BUCKMEM";
-				regulator-min-microvolt = <1420000>;
-				regulator-max-microvolt = <1580000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: buck4 {
-				regulator-name = "BUCKPERI";
-				regulator-min-microvolt = <2370000>;
-				regulator-max-microvolt = <2630000>;
-				regulator-always-on;
-			};
-
-			ldo1_reg: ldo1 {
-				regulator-name = "ldo1_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-name = "ldo2_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: ldo3 {
-				regulator-name = "ldo3_3v3";
-				regulator-min-microvolt = <3250000>;
-				regulator-max-microvolt = <3350000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ldo4 {
-				regulator-name = "ldo4_2v775";
-				regulator-min-microvolt = <2770000>;
-				regulator-max-microvolt = <2780000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: ldo5 {
-				regulator-name = "ldo5_3v3";
-				regulator-min-microvolt = <3250000>;
-				regulator-max-microvolt = <3350000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: ldo6 {
-				regulator-name = "ldo6_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: ldo7 {
-				regulator-name = "ldo7_2v75";
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: ldo8 {
-				regulator-name = "ldo8_1v8";
-				regulator-min-microvolt = <1750000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: ldo9 {
-				regulator-name = "ldo9_1v5";
-				regulator-min-microvolt = <1450000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: ldo10 {
-				regulator-name = "ldo10_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
deleted file mode 100644
index 17dc13719639a..0000000000000
--- a/arch/arm/boot/dts/imx53.dtsi
+++ /dev/null
@@ -1,859 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include "imx53-pinfunc.h"
-#include <dt-bindings/clock/imx5-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		ipu0 = &ipu;
-		mmc0 = &esdhc1;
-		mmc1 = &esdhc2;
-		mmc2 = &esdhc3;
-		mmc3 = &esdhc4;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &cspi;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0x0>;
-			clocks = <&clks IMX5_CLK_ARM>;
-			clock-latency = <61036>;
-			voltage-tolerance = <5>;
-			operating-points = <
-				/* kHz */
-				 166666  850000
-				 400000  900000
-				 800000 1050000
-				1000000 1200000
-				1200000 1300000
-			>;
-		};
-	};
-
-	display-subsystem {
-		compatible = "fsl,imx-display-subsystem";
-		ports = <&ipu_di0>, <&ipu_di1>;
-	};
-
-	capture_subsystem {
-		compatible = "fsl,imx-capture-subsystem";
-		ports = <&ipu_csi0>, <&ipu_csi1>;
-	};
-
-	tzic: tz-interrupt-controller@fffc000 {
-		compatible = "fsl,imx53-tzic", "fsl,tzic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x0fffc000 0x4000>;
-	};
-
-	clocks {
-		ckil {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-
-		ckih1 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <22579200>;
-		};
-
-		ckih2 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		osc {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupt-parent = <&tzic>;
-		interrupts = <77>;
-	};
-
-	usbphy0: usbphy-0 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
-		clock-names = "main_clk";
-		#phy-cells = <0>;
-		status = "okay";
-	};
-
-	usbphy1: usbphy-1 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
-		clock-names = "main_clk";
-		#phy-cells = <0>;
-		status = "okay";
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&tzic>;
-		ranges;
-
-		sata: sata@10000000 {
-			compatible = "fsl,imx53-ahci";
-			reg = <0x10000000 0x1000>;
-			interrupts = <28>;
-			clocks = <&clks IMX5_CLK_SATA_GATE>,
-				 <&clks IMX5_CLK_SATA_REF>,
-				 <&clks IMX5_CLK_AHB>;
-			clock-names = "sata", "sata_ref", "ahb";
-			status = "disabled";
-		};
-
-		ipu: ipu@18000000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,imx53-ipu";
-			reg = <0x18000000 0x08000000>;
-			interrupts = <11 10>;
-			clocks = <&clks IMX5_CLK_IPU_GATE>,
-				 <&clks IMX5_CLK_IPU_DI0_GATE>,
-				 <&clks IMX5_CLK_IPU_DI1_GATE>;
-			clock-names = "bus", "di0", "di1";
-			resets = <&src 2>;
-
-			ipu_csi0: port@0 {
-				reg = <0>;
-
-				ipu_csi0_from_parallel_sensor: endpoint {
-				};
-			};
-
-			ipu_csi1: port@1 {
-				reg = <1>;
-
-				ipu_csi1_from_parallel_sensor: endpoint {
-				};
-			};
-
-			ipu_di0: port@2 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <2>;
-
-				ipu_di0_disp0: endpoint@0 {
-					reg = <0>;
-				};
-
-				ipu_di0_lvds0: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&lvds0_in>;
-				};
-			};
-
-			ipu_di1: port@3 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <3>;
-
-				ipu_di1_disp1: endpoint@0 {
-					reg = <0>;
-				};
-
-				ipu_di1_lvds1: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&lvds1_in>;
-				};
-
-				ipu_di1_tve: endpoint@2 {
-					reg = <2>;
-					remote-endpoint = <&tve_in>;
-				};
-			};
-		};
-
-		gpu: gpu@30000000 {
-			compatible = "amd,imageon-200.0", "amd,imageon";
-			reg = <0x30000000 0x20000>;
-			reg-names = "kgsl_3d0_reg_memory";
-			interrupts = <12>;
-			interrupt-names = "kgsl_3d0_irq";
-			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
-			clock-names = "core_clk", "mem_iface_clk";
-		};
-
-		aips1: bus@50000000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x10000000>;
-			ranges;
-
-			spba-bus@50000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x50000000 0x40000>;
-				ranges;
-
-				esdhc1: mmc@50004000 {
-					compatible = "fsl,imx53-esdhc";
-					reg = <0x50004000 0x4000>;
-					interrupts = <1>;
-					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-						 <&clks IMX5_CLK_DUMMY>,
-						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				esdhc2: mmc@50008000 {
-					compatible = "fsl,imx53-esdhc";
-					reg = <0x50008000 0x4000>;
-					interrupts = <2>;
-					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-						 <&clks IMX5_CLK_DUMMY>,
-						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				uart3: serial@5000c000 {
-					compatible = "fsl,imx53-uart", "fsl,imx21-uart";
-					reg = <0x5000c000 0x4000>;
-					interrupts = <33>;
-					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-						 <&clks IMX5_CLK_UART3_PER_GATE>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				ecspi1: spi@50010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
-					reg = <0x50010000 0x4000>;
-					interrupts = <36>;
-					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ssi2: ssi@50014000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx53-ssi",
-							"fsl,imx51-ssi",
-							"fsl,imx21-ssi";
-					reg = <0x50014000 0x4000>;
-					interrupts = <30>;
-					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
-						 <&clks IMX5_CLK_SSI2_ROOT_GATE>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 24 1 0>,
-					       <&sdma 25 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				esdhc3: mmc@50020000 {
-					compatible = "fsl,imx53-esdhc";
-					reg = <0x50020000 0x4000>;
-					interrupts = <3>;
-					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-						 <&clks IMX5_CLK_DUMMY>,
-						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				esdhc4: mmc@50024000 {
-					compatible = "fsl,imx53-esdhc";
-					reg = <0x50024000 0x4000>;
-					interrupts = <4>;
-					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-						 <&clks IMX5_CLK_DUMMY>,
-						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-			};
-
-			aipstz1: bridge@53f00000 {
-				compatible = "fsl,imx53-aipstz";
-				reg = <0x53f00000 0x60>;
-			};
-
-			usbotg: usb@53f80000 {
-				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
-				reg = <0x53f80000 0x0200>;
-				interrupts = <18>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,usbphy = <&usbphy0>;
-				status = "disabled";
-			};
-
-			usbh1: usb@53f80200 {
-				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
-				reg = <0x53f80200 0x0200>;
-				interrupts = <14>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				fsl,usbmisc = <&usbmisc 1>;
-				fsl,usbphy = <&usbphy1>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			usbh2: usb@53f80400 {
-				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
-				reg = <0x53f80400 0x0200>;
-				interrupts = <16>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				fsl,usbmisc = <&usbmisc 2>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			usbh3: usb@53f80600 {
-				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
-				reg = <0x53f80600 0x0200>;
-				interrupts = <17>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				fsl,usbmisc = <&usbmisc 3>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@53f80800 {
-				#index-cells = <1>;
-				compatible = "fsl,imx53-usbmisc";
-				reg = <0x53f80800 0x200>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-			};
-
-			gpio1: gpio@53f84000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
-				reg = <0x53f84000 0x4000>;
-				interrupts = <50 51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@53f88000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
-				reg = <0x53f88000 0x4000>;
-				interrupts = <52 53>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@53f8c000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
-				reg = <0x53f8c000 0x4000>;
-				interrupts = <54 55>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@53f90000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
-				reg = <0x53f90000 0x4000>;
-				interrupts = <56 57>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			kpp: kpp@53f94000 {
-				compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
-				reg = <0x53f94000 0x4000>;
-				interrupts = <60>;
-				clocks = <&clks IMX5_CLK_DUMMY>;
-				status = "disabled";
-			};
-
-			wdog1: watchdog@53f98000 {
-				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
-				reg = <0x53f98000 0x4000>;
-				interrupts = <58>;
-				clocks = <&clks IMX5_CLK_DUMMY>;
-			};
-
-			wdog2: watchdog@53f9c000 {
-				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
-				reg = <0x53f9c000 0x4000>;
-				interrupts = <59>;
-				clocks = <&clks IMX5_CLK_DUMMY>;
-				status = "disabled";
-			};
-
-			gpt: timer@53fa0000 {
-				compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
-				reg = <0x53fa0000 0x4000>;
-				interrupts = <39>;
-				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-					 <&clks IMX5_CLK_GPT_HF_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			srtc: rtc@53fa4000 {
-				compatible = "fsl,imx53-rtc";
-				reg = <0x53fa4000 0x4000>;
-				interrupts = <24>;
-				clocks = <&clks IMX5_CLK_SRTC_GATE>;
-			};
-
-			iomuxc: iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc";
-				reg = <0x53fa8000 0x4000>;
-			};
-
-			gpr: iomuxc-gpr@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-gpr", "syscon";
-				reg = <0x53fa8000 0xc>;
-			};
-
-			ldb: ldb@53fa8008 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx53-ldb";
-				reg = <0x53fa8008 0x4>;
-				gpr = <&gpr>;
-				clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
-					 <&clks IMX5_CLK_LDB_DI1_SEL>,
-					 <&clks IMX5_CLK_IPU_DI0_SEL>,
-					 <&clks IMX5_CLK_IPU_DI1_SEL>,
-					 <&clks IMX5_CLK_LDB_DI0_GATE>,
-					 <&clks IMX5_CLK_LDB_DI1_GATE>;
-				clock-names = "di0_pll", "di1_pll",
-					      "di0_sel", "di1_sel",
-					      "di0", "di1";
-				status = "disabled";
-
-				lvds-channel@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-					status = "disabled";
-
-					port@0 {
-						reg = <0>;
-
-						lvds0_in: endpoint {
-							remote-endpoint = <&ipu_di0_lvds0>;
-						};
-					};
-
-					port@2 {
-						reg = <2>;
-					};
-				};
-
-				lvds-channel@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-					status = "disabled";
-
-					port@1 {
-						reg = <1>;
-
-						lvds1_in: endpoint {
-							remote-endpoint = <&ipu_di1_lvds1>;
-						};
-					};
-
-					port@2 {
-						reg = <2>;
-					};
-				};
-			};
-
-			pwm1: pwm@53fb4000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
-				reg = <0x53fb4000 0x4000>;
-				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-					 <&clks IMX5_CLK_PWM1_HF_GATE>;
-				clock-names = "ipg", "per";
-				interrupts = <61>;
-			};
-
-			pwm2: pwm@53fb8000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
-				reg = <0x53fb8000 0x4000>;
-				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-					 <&clks IMX5_CLK_PWM2_HF_GATE>;
-				clock-names = "ipg", "per";
-				interrupts = <94>;
-			};
-
-			uart1: serial@53fbc000 {
-				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
-				reg = <0x53fbc000 0x4000>;
-				interrupts = <31>;
-				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-					 <&clks IMX5_CLK_UART1_PER_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			uart2: serial@53fc0000 {
-				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
-				reg = <0x53fc0000 0x4000>;
-				interrupts = <32>;
-				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-					 <&clks IMX5_CLK_UART2_PER_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			can1: can@53fc8000 {
-				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
-				reg = <0x53fc8000 0x4000>;
-				interrupts = <82>;
-				clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
-					 <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			can2: can@53fcc000 {
-				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
-				reg = <0x53fcc000 0x4000>;
-				interrupts = <83>;
-				clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
-					 <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			src: reset-controller@53fd0000 {
-				compatible = "fsl,imx53-src", "fsl,imx51-src";
-				reg = <0x53fd0000 0x4000>;
-				interrupts = <75>;
-				#reset-cells = <1>;
-			};
-
-			clks: ccm@53fd4000{
-				compatible = "fsl,imx53-ccm";
-				reg = <0x53fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
-				#clock-cells = <1>;
-			};
-
-			gpio5: gpio@53fdc000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
-				reg = <0x53fdc000 0x4000>;
-				interrupts = <103 104>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio6: gpio@53fe0000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
-				reg = <0x53fe0000 0x4000>;
-				interrupts = <105 106>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio7: gpio@53fe4000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
-				reg = <0x53fe4000 0x4000>;
-				interrupts = <107 108>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			i2c3: i2c@53fec000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
-				reg = <0x53fec000 0x4000>;
-				interrupts = <64>;
-				clocks = <&clks IMX5_CLK_I2C3_GATE>;
-				status = "disabled";
-			};
-
-			uart4: serial@53ff0000 {
-				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
-				reg = <0x53ff0000 0x4000>;
-				interrupts = <13>;
-				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
-					 <&clks IMX5_CLK_UART4_PER_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-		};
-
-		aips2: bus@60000000 {	/* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x60000000 0x10000000>;
-			ranges;
-
-			aipstz2: bridge@63f00000 {
-				compatible = "fsl,imx53-aipstz";
-				reg = <0x63f00000 0x60>;
-			};
-
-			iim: efuse@63f98000 {
-				compatible = "fsl,imx53-iim", "fsl,imx27-iim", "syscon";
-				reg = <0x63f98000 0x4000>;
-				interrupts = <69>;
-				clocks = <&clks IMX5_CLK_IIM_GATE>;
-			};
-
-			uart5: serial@63f90000 {
-				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
-				reg = <0x63f90000 0x4000>;
-				interrupts = <86>;
-				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
-					 <&clks IMX5_CLK_UART5_PER_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			tigerp: tigerp@63fa0000 {
-				compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp";
-				reg = <0x63fa0000 0x28>;
-			};
-
-			owire: owire@63fa4000 {
-				compatible = "fsl,imx53-owire", "fsl,imx21-owire";
-				reg = <0x63fa4000 0x4000>;
-				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
-				status = "disabled";
-			};
-
-			ecspi2: spi@63fac000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
-				reg = <0x63fac000 0x4000>;
-				interrupts = <37>;
-				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			sdma: dma-controller@63fb0000 {
-				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
-				reg = <0x63fb0000 0x4000>;
-				interrupts = <6>;
-				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-					 <&clks IMX5_CLK_AHB>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-			};
-
-			cspi: spi@63fc0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
-				reg = <0x63fc0000 0x4000>;
-				interrupts = <38>;
-				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c2: i2c@63fc4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
-				reg = <0x63fc4000 0x4000>;
-				interrupts = <63>;
-				clocks = <&clks IMX5_CLK_I2C2_GATE>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@63fc8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
-				reg = <0x63fc8000 0x4000>;
-				interrupts = <62>;
-				clocks = <&clks IMX5_CLK_I2C1_GATE>;
-				status = "disabled";
-			};
-
-			ssi1: ssi@63fcc000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
-						"fsl,imx21-ssi";
-				reg = <0x63fcc000 0x4000>;
-				interrupts = <29>;
-				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
-					 <&clks IMX5_CLK_SSI1_ROOT_GATE>;
-				clock-names = "ipg", "baud";
-				dmas = <&sdma 28 0 0>,
-				       <&sdma 29 0 0>;
-				dma-names = "rx", "tx";
-				fsl,fifo-depth = <15>;
-				status = "disabled";
-			};
-
-			audmux: audmux@63fd0000 {
-				compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
-				reg = <0x63fd0000 0x4000>;
-				status = "disabled";
-			};
-
-			nfc: nand@63fdb000 {
-				compatible = "fsl,imx53-nand";
-				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
-				interrupts = <8>;
-				clocks = <&clks IMX5_CLK_NFC_GATE>;
-				status = "disabled";
-			};
-
-			ssi3: ssi@63fe8000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
-						"fsl,imx21-ssi";
-				reg = <0x63fe8000 0x4000>;
-				interrupts = <96>;
-				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
-					 <&clks IMX5_CLK_SSI3_ROOT_GATE>;
-				clock-names = "ipg", "baud";
-				dmas = <&sdma 46 0 0>,
-				       <&sdma 47 0 0>;
-				dma-names = "rx", "tx";
-				fsl,fifo-depth = <15>;
-				status = "disabled";
-			};
-
-			fec: ethernet@63fec000 {
-				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
-				reg = <0x63fec000 0x4000>;
-				interrupts = <87>;
-				clocks = <&clks IMX5_CLK_FEC_GATE>,
-					 <&clks IMX5_CLK_FEC_GATE>,
-					 <&clks IMX5_CLK_FEC_GATE>;
-				clock-names = "ipg", "ahb", "ptp";
-				status = "disabled";
-			};
-
-			tve: tve@63ff0000 {
-				compatible = "fsl,imx53-tve";
-				reg = <0x63ff0000 0x1000>;
-				interrupts = <92>;
-				clocks = <&clks IMX5_CLK_TVE_GATE>,
-					 <&clks IMX5_CLK_IPU_DI1_SEL>;
-				clock-names = "tve", "di_sel";
-				status = "disabled";
-
-				port {
-					tve_in: endpoint {
-						remote-endpoint = <&ipu_di1_tve>;
-					};
-				};
-			};
-
-			vpu: vpu@63ff4000 {
-				compatible = "fsl,imx53-vpu", "cnm,coda7541";
-				reg = <0x63ff4000 0x1000>;
-				interrupts = <9>;
-				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
-					 <&clks IMX5_CLK_VPU_GATE>;
-				clock-names = "per", "ahb";
-				resets = <&src 1>;
-				iram = <&ocram>;
-			};
-
-			sahara: crypto@63ff8000 {
-				compatible = "fsl,imx53-sahara";
-				reg = <0x63ff8000 0x4000>;
-				interrupts = <19 20>;
-				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
-					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
-				clock-names = "ipg", "ahb";
-			};
-		};
-
-		ocram: sram@f8000000 {
-			compatible = "mmio-sram";
-			reg = <0xf8000000 0x20000>;
-			ranges = <0 0xf8000000 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&clks IMX5_CLK_OCRAM>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
deleted file mode 100644
index d477a937b47a8..0000000000000
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ /dev/null
@@ -1,561 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2019 Logic PD, Inc.
-
-/ {
-	keyboard {
-		compatible = "gpio-keys";
-
-		button-0 {
-			gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>;
-			label = "btn0";
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-
-		button-1 {
-			gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>;
-			label = "btn1";
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-
-		button-2 {
-			gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>;
-			label = "btn2";
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-
-		button-3 {
-			gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>;
-			label = "btn3";
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		gen-led0 {
-			label = "led0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_led0>;
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-		};
-
-		gen-led1 {
-			label = "led1";
-			gpios = <&pcf8575 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		gen-led2 {
-			label = "led2";
-			gpios = <&pcf8575 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		gen-led3 {
-			label = "led3";
-			gpios = <&pcf8575 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	reg_usb_otg_vbus: regulator-otg-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb_otg>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	reg_3v3: regulator-3v3 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_3v3>;
-		compatible = "regulator-fixed";
-		regulator-name = "reg_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_enet: regulator-ethernet {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_enet>;
-		compatible = "regulator-fixed";
-		regulator-name = "ethernet-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-		vin-supply = <&sw4_reg>;
-	};
-
-	reg_audio: regulator-audio {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_audio>;
-		compatible = "regulator-fixed";
-		regulator-name = "3v3_aud";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_3v3>;
-	};
-
-	reg_hdmi: regulator-hdmi {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_hdmi>;
-		compatible = "regulator-fixed";
-		regulator-name = "hdmi-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_3v3>;
-	};
-
-	reg_uart3: regulator-uart3 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_uart3>;
-		compatible = "regulator-fixed";
-		regulator-name = "uart3-supply";
-		gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		vin-supply = <&reg_3v3>;
-	};
-
-	reg_1v8: regulator-1v8 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_1v8>;
-		compatible = "regulator-fixed";
-		regulator-name = "1v8-supply";
-		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		vin-supply = <&reg_3v3>;
-	};
-
-	reg_pcie: regulator-pcie {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_pcie>;
-		regulator-name = "mpcie_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_mipi: regulator-mipi {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_mipi>;
-		regulator-name = "mipi_pwr_en";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-wm8962";
-		model = "wm8962-audio";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&wm8962>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-duration = <10>;
-	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-	phy-supply = <&reg_enet>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	wm8962: audio-codec@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		DCVDD-supply = <&reg_audio>;
-		DBVDD-supply = <&reg_audio>;
-		AVDD-supply = <&reg_audio>;
-		CPVDD-supply = <&reg_audio>;
-		MICVDD-supply = <&reg_audio>;
-		PLLVDD-supply = <&reg_audio>;
-		SPKVDD1-supply = <&reg_audio>;
-		SPKVDD2-supply = <&reg_audio>;
-		gpio-cfg = <
-			0x0000 /* 0:Default */
-			0x0000 /* 1:Default */
-			0x0000 /* 2:FN_DMICCLK */
-			0x0000 /* 3:Default */
-			0x0000 /* 4:FN_DMICCDAT */
-			0x0000 /* 5:Default */
-		>;
-	};
-};
-
-&i2c3 {
-	ov5640: camera@10 {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x10>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xclk";
-		DOVDD-supply = <&reg_mipi>;
-		AVDD-supply = <&reg_mipi>;
-		DVDD-supply = <&reg_mipi>;
-		reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-		powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
-
-		port {
-			ov5640_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-
-	pcf8575: gpio@20 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcf8574>;
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		lines-initial-states = <0x0710>;
-		wakeup-source;
-	};
-};
-
-&ipu1_csi1_from_mipi_vc1 {
-	clock-lanes = <0>;
-	data-lanes = <1 2>;
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5640_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	vmmc-supply = <&reg_3v3>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
-			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
-			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
-			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
-			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
-			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
-			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0	/* ENET_INT */
-			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x1b0b0	/* ETHR_nRST */
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_led0: led0grp {
-	    fsl,pins = <
-		MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
-	    >;
-	};
-
-	pinctrl_ov5640: ov5640grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__GPIO3_IO26	0x1b0b1
-			MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x1b0b1
-		>;
-	};
-
-	pinctrl_pcf8574: pcf8575grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-	    fsl,pins = <
-		MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
-	    >;
-	};
-
-	pinctrl_reg_1v8: reg1v8grp {
-	    fsl,pins = <
-		MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
-	    >;
-	};
-
-	pinctrl_reg_3v3: reg3v3grp {
-	    fsl,pins = <
-		MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b0
-	    >;
-	};
-
-	pinctrl_reg_audio: reg-audiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
-		>;
-	};
-
-	pinctrl_reg_enet: reg-enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x1b0b0
-		>;
-	};
-
-	pinctrl_reg_hdmi: reg-hdmigrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x1b0b0
-		>;
-	};
-
-	pinctrl_reg_mipi: reg-mipigrp {
-		fsl,pins = <MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b1>;
-	};
-
-	pinctrl_reg_pcie: reg-pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
-			>;
-	};
-
-	pinctrl_reg_uart3: reguart3grp {
-	    fsl,pins = <
-		MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
-	    >;
-	};
-
-	pinctrl_reg_usb_h1_vbus: usbh1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
-		>;
-	};
-
-	pinctrl_reg_usb_otg: reg-usb-otggrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0xd17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17069
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10069
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17069
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17069
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17069
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17069
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: h100-usdhc2-100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: h100-usdhc2-200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-		>;
-	};
-
-};
diff --git a/arch/arm/boot/dts/imx6-logicpd-som.dtsi b/arch/arm/boot/dts/imx6-logicpd-som.dtsi
deleted file mode 100644
index 547fb141ec0c9..0000000000000
--- a/arch/arm/boot/dts/imx6-logicpd-som.dtsi
+++ /dev/null
@@ -1,369 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2019 Logic PD, Inc.
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	reg_wl18xx_vmmc: regulator-wl18xx {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1837";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	pfuze100: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <725000>;
-				regulator-max-microvolt = <1450000>;
-				regulator-name = "vddcore";
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <725000>;
-				regulator-max-microvolt = <1450000>;
-				regulator-name = "vddsoc";
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "gen_3v3";
-				regulator-boot-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-name = "sw3a_vddr";
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-name = "sw3b_vddr";
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "gen_rgmii";
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-name = "gen_5v0";
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-name = "gen_vsns";
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-name = "gen_1v5";
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-name = "vgen2";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-name = "gen_vadj_0";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-name = "gen_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-name = "gen_vadj_1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-name = "gen_2v5";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			coin_reg: coin {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	temperature-sensor@49 {
-		compatible = "ti,tmp102";
-		reg = <0x49>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-		#thermal-sensor-cells = <1>;
-	};
-
-	temperature-sensor@4a {
-		compatible = "ti,tmp102";
-		reg = <0x4a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tempsense>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-		#thermal-sensor-cells = <1>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		pagesize = <32>;
-		read-only;	/* Manufacturing EEPROM programmed at factory */
-		reg = <0x51>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c64";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
-
-/* Reroute power feeding the CPU to come from the external PMIC */
-&reg_arm
-{
-	vin-supply = <&sw1a_reg>;
-};
-
-&reg_soc
-{
-	vin-supply = <&sw1c_reg>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_gpmi_nand: gpmi-nandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0x0b0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0x0b0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0x0b0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0x0b0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0x0b0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0x0b0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0x0b0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0x0b0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0x0b0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0x0b0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0x0b0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0x0b0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0x0b0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0x0b0b1
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <	/* Enable ARM Debugger */
-			MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL	0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO	0x1b0b0
-			MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00	0x1b0b0
-			MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15	0x1b0b0
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1        0x130b0
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_tempsense: tempsensegrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x13059	/* BT_EN */
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170B9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100B9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170B9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170B9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170B9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170B9
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17049
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10049
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x130b0 /* WL_IRQ */
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x17059 /* WLAN_EN */
-		>;
-	};
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "ti,wl1837-st";
-		enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&sw2_reg>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_wl18xx_vmmc>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	wlcore: wlcore@2 {
-		  compatible = "ti,wl1837";
-		  reg = <2>;
-		  interrupt-parent = <&gpio7>;
-		  interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-		  tcxo-clock-frequency = <26000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts
deleted file mode 100644
index e6a4e27706400..0000000000000
--- a/arch/arm/boot/dts/imx6dl-alti6p.dts
+++ /dev/null
@@ -1,568 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2016 Protonic Holland
- * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-#include "imx6dl.dtsi"
-
-/ {
-	model = "Altesco I6P Board";
-	compatible = "alt,alti6p", "fsl,imx6dl";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	clock_ksz8081: clock-ksz8081 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-output-names = "enet_ref_pad";
-	};
-
-	i2c2-mux {
-		compatible = "i2c-mux";
-		i2c-parent = <&i2c2>;
-		mux-controls = <&i2c_mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	i2c4-mux {
-		compatible = "i2c-mux";
-		i2c-parent = <&i2c4>;
-		mux-controls = <&i2c_mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-debug0 {
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-debug1 {
-			function = LED_FUNCTION_SD;
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "disk-activity";
-		};
-	};
-
-	i2c_mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2cmux>;
-
-		mux-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>,
-			    <&gpio5 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_h1_vbus: regulator-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "h1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_otg_vbus: regulator-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "otg-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "prti6q-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Line", "Line In Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "External Speaker";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"External Speaker", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-			system-clock-frequency = <0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-			bitclock-master;
-			frame-master;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	mux-ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		0
-			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TFSDIR	0
-			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
-	};
-
-	mux-pins3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_5v0>;
-	status = "okay";
-};
-
-&clks {
-	clocks = <&clock_ksz8081>;
-	clock-names = "enet_ref_pad";
-	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
-	assigned-clock-parents = <&clock_ksz8081>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ8081RNA PHY */
-		rgmii_phy: ethernet-phy@0 {
-			reg = <0>;
-			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "SD1_CD", "", "USB_H1_OC", "", "", "", "",
-		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "ECSPI1_SS1", "", "USB_EXT1_OC", "USB_EXT1_PWR", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "ETH_RESET", "", "", "BUZZER", "ETH_INTRP", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "I2C_EN13", "I2C_EN24", "", "", "", "",
-		"", "", "", "", "", "AUDIO_RESET", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi>;
-	ddc-i2c-bus = <&i2c1>;
-	status = "okay";
-};
-
-/* DDC */
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	sgtl5000: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0xa>;
-		#sound-dai-cells = <0>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_3v3>;
-		VDDIO-supply = <&reg_3v3>;
-		VDDD-supply = <&reg_1v8>;
-	};
-
-	/* additional i2c devices are added automatically by the boot loader */
-};
-
-&i2c2 {
-	clock-frequency = <50000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	/* external interface, device are configured from user space */
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	temperature-sensor@70 {
-		compatible = "ti,tmp103";
-		reg = <0x70>;
-	};
-};
-
-&i2c4 {
-	clock-frequency = <50000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&ssi1 {
-	#sound-dai-cells = <0>;
-	fsl,mode = "ac97-slave";
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_h1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	disable-wp;
-	cap-sd-highspeed;
-	no-mmc;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	no-sd;
-	no-sdio;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
-		>;
-	};
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x1b000
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x3008
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x3008
-			/* CS */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x3008
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			/* MX6QDL_ENET_PINGRP4 */
-			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
-
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
-			/* Phy reset */
-			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
-			/* nINTRP */
-			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
-		>;
-	};
-
-	pinctrl_hdmi: hdmigrp {
-		fsl,pins = <
-			/* NOTE: DDC is done via I2C2, so DON'T configure DDC
-			 * pins for HDMI!
-			 */
-			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE		0x1f8b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL			0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA			0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CS3__I2C4_SDA			0x4001f8b1
-			MX6QDL_PAD_NANDF_WP_B__I2C4_SCL			0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2cmux: i2cmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10		0x1b0b0
-			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11		0x1b0b0
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09			0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x8
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbh1: usbh1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__USB_H1_OC			0x1B058
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1B058
-
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
-			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
-			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts
deleted file mode 100644
index 3dcce3454b081..0000000000000
--- a/arch/arm/boot/dts/imx6dl-apf6dev.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2015 Armadeus Systems <support@armadeus.com>
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-apf6.dtsi"
-#include "imx6qdl-apf6dev.dtsi"
-
-/ {
-	model = "Armadeus APF6 Solo Module on APF6Dev Board";
-	compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
deleted file mode 100644
index dfa6f64d43cce..0000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos2.dtsi"
-
-/ {
-	model = "aristainetos2 i.MX6 Dual Lite Board 4";
-	compatible = "abb,aristainetos2-imx6dl-4", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	display0: disp0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp>;
-
-		port@0 {
-			reg = <0>;
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&ecspi1 {
-	lcd_panel: display@0 {
-		compatible = "lg,lg4573";
-		spi-max-frequency = <10000000>;
-		reg = <0>;
-		power-on-delay = <10>;
-
-		display-timings {
-			480x800p57 {
-				native-mode;
-				clock-frequency = <27000027>;
-				hactive = <480>;
-				vactive = <800>;
-				hfront-porch = <10>;
-				hback-porch = <59>;
-				hsync-len = <10>;
-				vback-porch = <15>;
-				vfront-porch = <15>;
-				vsync-len = <15>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	touch: touch@4b {
-		compatible = "atmel,maxtouch";
-		reg = <0x4b>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 8>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&iomuxc {
-	pinctrl_ipu_disp: ipudisp1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0xE1
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0xE1
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0xE1
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0xE1
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0xE1
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0xE1
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0xE1
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0xE1
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0xE1
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0xE1
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0xE1
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0xE1
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0xE1
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0xE1
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0xE1
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0xe1
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0xE1
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0xE1
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0xE1
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0xE1
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0xE1
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0xE1
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0xE1
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0xE1
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0xE1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
deleted file mode 100644
index 5e15212eaf3ad..0000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos2.dtsi"
-
-/ {
-	model = "aristainetos2 i.MX6 Dual Lite Board 7";
-	compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	panel: panel {
-		compatible = "lg,lb070wv8";
-		backlight = <&backlight>;
-		enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	touch: touch@4d {
-		compatible = "atmel,maxtouch";
-		reg = <0x4d>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 8>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-			lvds0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_lvds0>;
-			};
-		};
-
-		port@4 {
-			reg = <4>;
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
deleted file mode 100644
index cc861a43eb580..0000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * support fot the imx6 based aristainetos board
- *
- * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos.dtsi"
-
-/ {
-	model = "aristainetos i.MX6 Dual Lite Board 4";
-	compatible = "abb,aristainetos-imx6dl-4", "fsl,imx6dl";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		status = "okay";
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	display0: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp>;
-		status = "okay";
-
-		display-timings {
-			480x800p60 {
-				native-mode;
-				clock-frequency = <30000000>;
-				hactive = <480>;
-				vactive = <800>;
-				hfront-porch = <59>;
-				hback-porch = <10>;
-				hsync-len = <10>;
-				vback-porch = <15>;
-				vfront-porch = <15>;
-				vsync-len = <15>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
deleted file mode 100644
index b6cb78870cd54..0000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * support fot the imx6 based aristainetos board
- *
- * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos.dtsi"
-
-/ {
-	model = "aristainetos i.MX6 Dual Lite Board 7";
-	compatible = "abb,aristainetos-imx6dl-7", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	display0: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp>;
-		status = "okay";
-
-		display-timings {
-			800x480p60 {
-				native-mode;
-				clock-frequency = <33246000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <88>;
-				hback-porch = <88>;
-				hsync-len = <80>;
-				vback-porch = <10>;
-				vfront-porch = <10>;
-				vsync-len = <25>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 3000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-b105pv2.dts b/arch/arm/boot/dts/imx6dl-b105pv2.dts
deleted file mode 100644
index 411aa72d344b8..0000000000000
--- a/arch/arm/boot/dts/imx6dl-b105pv2.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
-//
-// Device Tree Source for General Electric B105Pv2
-//
-// Copyright 2018-2021 General Electric Company
-// Copyright 2018-2021 Collabora
-
-/dts-v1/;
-#include "imx6dl-b1x5pv2.dtsi"
-
-/ {
-	model = "General Electric B105Pv2";
-	compatible = "ge,imx6dl-b105pv2", "congatec,qmx6", "fsl,imx6dl";
-
-	panel {
-		compatible = "auo,g101evn010";
-	};
-};
-
-&i2c3 {
-	touchscreen@41 {
-		compatible = "ilitek,ili251x";
-		reg = <0x41>;
-		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <1280>;
-		touchscreen-size-y = <800>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-b105v2.dts b/arch/arm/boot/dts/imx6dl-b105v2.dts
deleted file mode 100644
index d011127c635b5..0000000000000
--- a/arch/arm/boot/dts/imx6dl-b105v2.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
-//
-// Device Tree Source for General Electric B105v2
-//
-// Copyright 2018-2021 General Electric Company
-// Copyright 2018-2021 Collabora
-
-/dts-v1/;
-#include "imx6dl-b1x5v2.dtsi"
-
-/ {
-	model = "General Electric B105v2";
-	compatible = "ge,imx6dl-b105v2", "congatec,qmx6", "fsl,imx6dl";
-
-	panel {
-		compatible = "auo,g101evn010";
-	};
-};
-
-&i2c3 {
-	touchscreen@41 {
-		compatible = "ilitek,ili251x";
-		reg = <0x41>;
-		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <1280>;
-		touchscreen-size-y = <800>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-b125pv2.dts b/arch/arm/boot/dts/imx6dl-b125pv2.dts
deleted file mode 100644
index ca840fa84052e..0000000000000
--- a/arch/arm/boot/dts/imx6dl-b125pv2.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
-//
-// Device Tree Source for General Electric B125Pv2
-//
-// Copyright 2018-2021 General Electric Company
-// Copyright 2018-2021 Collabora
-
-/dts-v1/;
-#include "imx6dl-b1x5pv2.dtsi"
-
-/ {
-	model = "General Electric B125Pv2";
-	compatible = "ge,imx6dl-b125pv2", "congatec,qmx6", "fsl,imx6dl";
-
-	panel {
-		compatible = "auo,g121ean01";
-	};
-};
-
-&i2c3 {
-	touchscreen@2a {
-		compatible = "eeti,exc80h60";
-		reg = <0x2a>;
-		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-b125v2.dts b/arch/arm/boot/dts/imx6dl-b125v2.dts
deleted file mode 100644
index 81e5a9cb89006..0000000000000
--- a/arch/arm/boot/dts/imx6dl-b125v2.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
-//
-// Device Tree Source for General Electric B125v2
-//
-// Copyright 2018-2021 General Electric Company
-// Copyright 2018-2021 Collabora
-
-/dts-v1/;
-#include "imx6dl-b1x5v2.dtsi"
-
-/ {
-	model = "General Electric B125v2";
-	compatible = "ge,imx6dl-b125v2", "congatec,qmx6", "fsl,imx6dl";
-
-	panel {
-		compatible = "auo,g121ean01";
-	};
-};
-
-&i2c3 {
-	touchscreen@2a {
-		compatible = "eeti,exc80h60";
-		reg = <0x2a>;
-		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-b155v2.dts b/arch/arm/boot/dts/imx6dl-b155v2.dts
deleted file mode 100644
index c861937b30f6a..0000000000000
--- a/arch/arm/boot/dts/imx6dl-b155v2.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
-//
-// Device Tree Source for General Electric B155v2
-//
-// Copyright 2018-2021 General Electric Company
-// Copyright 2018-2021 Collabora
-
-/dts-v1/;
-#include "imx6dl-b1x5v2.dtsi"
-
-/ {
-	model = "General Electric B155v2";
-	compatible = "ge,imx6dl-b155v2", "congatec,qmx6", "fsl,imx6dl";
-
-	panel {
-		compatible = "auo,g156xtn01";
-	};
-};
-
-&i2c3 {
-	touchscreen@2a {
-		compatible = "eeti,exc80h84";
-		reg = <0x2a>;
-		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		touchscreen-inverted-x;
-		touchscreen-inverted-y;
-		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
deleted file mode 100644
index 37697fac9dea9..0000000000000
--- a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
+++ /dev/null
@@ -1,413 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
-//
-// Device Tree Source for General Electric B1x5Pv2
-// patient monitor series
-//
-// Copyright 2018-2021 General Electric Company
-// Copyright 2018-2021 Collabora
-
-#include <dt-bindings/input/input.h>
-#include "imx6dl-qmx6.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	/* Do not allow frequencies above 800MHz */
-	cpus {
-		cpu@0 {
-			operating-points = <
-				/* kHz    uV */
-				792000  1175000
-				396000  1150000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz	SOC-PU uV */
-				792000	1175000
-				396000	1175000
-			>;
-		};
-
-		cpu@1 {
-			operating-points = <
-				/* kHz    uV */
-				792000  1175000
-				396000  1150000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz	SOC-PU uV */
-				792000	1175000
-				396000	1175000
-			>;
-		};
-	};
-
-	reg_syspwr: regulator-12v {
-		compatible = "regulator-fixed";
-		regulator-name = "SYS_PWR";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	reg_5v_pmc: regulator-5v-pmc {
-		compatible = "regulator-fixed";
-		regulator-name = "5V PMC";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_syspwr>;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_syspwr>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&reg_syspwr>;
-	};
-
-	reg_5v0_audio: regulator-5v0-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "5V0_AUDIO";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_5v>;
-		gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		/*
-		 * This must be always-on for da7212, which has some not
-		 * properly documented dependencies for it's speaker supply
-		 * pin. The issue manifests as speaker volume being very low.
-		 */
-		regulator-always-on;
-	};
-
-
-	reg_3v3_audio: regulator-3v3-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&reg_3v3>;
-		pinctrl-0 = <&pinctrl_q7_hda_reset>;
-		pinctrl-names = "default";
-		gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_2v5_audio: regulator-2v5-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "2V5_AUDIO";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-		vin-supply = <&reg_3v3_audio>;
-
-	};
-
-	reg_wlan: regulator-wlan {
-		compatible = "regulator-fixed";
-		regulator-name = "WLAN";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&reg_3v3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_q7_sdio_power>;
-		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <70000>;
-	};
-
-	reg_bl: regulator-backlight {
-		compatible = "regulator-fixed";
-		regulator-name = "LED_VCC";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		vin-supply = <&reg_syspwr>;
-		pinctrl-0 = <&pinctrl_q7_lcd_power>;
-		pinctrl-names = "default";
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lcd: regulator-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_5v>;
-	};
-
-	usb_power: regulator-usb-power {
-		compatible = "regulator-fixed";
-		regulator-name = "USB POWER";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_5v>;
-	};
-
-	charger: battery-charger {
-		compatible = "gpio-charger"; /* ti,bq24172 */
-		charger-type = "mains";
-		gpios = <&tca6424a 3 GPIO_ACTIVE_LOW>;
-		charge-current-limit-gpios = <&tca6424a 11 GPIO_ACTIVE_HIGH>,
-					     <&tca6424a 12 GPIO_ACTIVE_HIGH>;
-		charge-current-limit-mapping = <1300000 0x0>,
-					       <700000 0x1>,
-					       <0 0x2>;
-		charge-status-gpios = <&tca6424a 6 GPIO_ACTIVE_HIGH>;
-	};
-
-	poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_q7_spi_cs1>;
-		gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
-	};
-
-	power-button-key {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_q7_sleep_button>;
-
-		power-button {
-			label = "power button";
-			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-	};
-
-	rotary-encoder-key {
-		compatible = "gpio-keys";
-
-		rotary-encoder-event {
-			label = "rotary-encoder press";
-			gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_ENTER>;
-			linux,can-disable;
-		};
-	};
-
-	rotary-encoder {
-		compatible = "rotary-encoder";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_q7_gpio2 &pinctrl_q7_gpio4>;
-		gpios = <&gpio4 26 GPIO_ACTIVE_LOW>, <&gpio1 0 GPIO_ACTIVE_LOW>;
-		rotary-encoder,relative-axis;
-		rotary-encoder,steps-per-period = <2>;
-		wakeup-source;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
-
-		led-alarm1 {
-			label = "alarm:red";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-alarm2 {
-			label = "alarm:yellow";
-			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-alarm3 {
-			label = "alarm:blue";
-			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_q7_backlight_enable>;
-		power-supply = <&reg_bl>;
-		pwms = <&pwm4 0 5000000 0>;
-		brightness-levels = <0 255>;
-		num-interpolated-steps = <255>;
-		default-brightness-level = <179>;
-		enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	};
-
-	panel {
-		backlight = <&backlight>;
-		power-supply = <&reg_lcd>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,widgets = "Speaker", "Ext Spk";
-		simple-audio-card,audio-routing = "Ext Spk", "LINE";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&codec>;
-		};
-	};
-
-	clk_ext_audio_codec: clock-codec {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12288000>;
-	};
-};
-
-&audmux {
-	status = "okay";
-};
-
-&fec {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&i2c1 {
-	battery: battery@b {
-		compatible = "ti,bq20z65", "sbs,sbs-battery";
-		reg = <0x0b>;
-		sbs,battery-detect-gpios = <&tca6424a 5 GPIO_ACTIVE_LOW>;
-		sbs,i2c-retry-count = <5>;
-		power-supplies = <&charger>;
-	};
-
-	codec: audio-codec@1a {
-		compatible = "dlg,da7212";
-		reg = <0x1a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_2v5_audio>;
-		VDDSP-supply = <&reg_5v0_audio>;
-		VDDMIC-supply = <&reg_3v3_audio>;
-		VDDIO-supply = <&reg_3v3_audio>;
-		clocks = <&clk_ext_audio_codec>;
-		clock-names = "mclk";
-	};
-};
-
-&i2c5 {
-	tca6424a: gpio-controller@22 {
-		compatible = "ti,tca6424";
-		reg = <0x22>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		vcc-supply = <&reg_3v3>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_q7_gpio6>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-line-names = "GPIO_ROTOR#", "ACM_IO_INT", "TMP_SENSOR_IRQ", "AC_IN",
-				  "TF_S", "BATT_T", "LED_INC_CHAR", "ACM1_OCF",
-				  "ACM2_OCF", "ACM_IO_RST", "USB1_POWER_EN", "EGPIO_CC_CTL0",
-				  "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "",
-				  "SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL",
-				  "MARKER_EN", "EGPIO_TOUCH_RST", "PRESSURE_INT1", "PRESSURE_INT2";
-
-	};
-
-	tmp75: temperature-sensor@48 {
-		compatible = "ti,tmp75";
-		reg = <0x48>;
-		vs-supply = <&reg_3v3>;
-		interrupt-parent = <&tca6424a>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		status = "okay";
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&ssi1 {
-	fsl,mode = "i2s-slave";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&usb_power>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-
-	/*
-	 * TPS2051BDGN fault-gpio is connected to Q7[86] USB_0_1_OC_N.
-	 * On QMX6 this is not connceted to the i.MX6, but to the USB Hub
-	 * from &usbh1. This means, that we cannot easily detect and handle
-	 * over-current events. Fortunately the regulator limits the current
-	 * automatically, so the hardware is still protected.
-	 */
-};
-
-&usdhc4 {
-	/* WiFi module */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	wakeup-source;
-	keep-power-in-suspend;
-	cap-power-off-card;
-	max-frequency = <25000000>;
-	vmmc-supply = <&reg_wlan>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1837";
-		reg = <2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_q7_gpio7>;
-
-		interrupt-parent = <&gpio4>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-
-		tcxo-clock-frequency = <26000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
deleted file mode 100644
index f028b6a191df5..0000000000000
--- a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
-//
-// Device Tree Source for General Electric B1x5v2
-// patient monitor series
-//
-// Copyright 2018-2021 General Electric Company
-// Copyright 2018-2021 Collabora
-
-#include <dt-bindings/input/input.h>
-#include "imx6dl-b1x5pv2.dtsi"
-
-/ {
-	reg_3v3_acm: regulator-3v3-acm {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3 ACM";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&reg_3v3>;
-	};
-};
-
-&i2c1 {
-	tca6416: gpio-controller@21 {
-		compatible = "ti,tca6416";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		reset-gpios = <&tca6424a 9 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&reg_3v3_acm>;
-		gpio-line-names = "ACM1_EN", "ACM1_CL0", "ACM1_CL1", "ACM1_CL2",
-				  "", "ACM2_EN", "ACM2_CL0", "ACM2_CL1",
-				  "ACM2_CL2", "", "", "",
-				  "", "", "", "";
-
-		/*
-		 * The interrupt pin is connected to &tca6424a pin 1, but the Linux
-		 * TCA6424 driver cannot handle low type interrupts at the moment
-		 * (and support cannot be added without some ugly hacks). Since this
-		 * controller does not have any input type GPIOs, just pretend
-		 * that the interrupt pin is unconnected.
-		 */
-	};
-};
-
-&i2c5 {
-	mpl3115a2: pressure-sensor@60 {
-		compatible = "fsl,mpl3115";
-		reg = <0x60>;
-
-		/*
-		 * The MPL3115 interrupts are connected to pin 22 and 23
-		 * of &tca6424a, but the binding does not yet support
-		 * interrupts.
-		 */
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
deleted file mode 100644
index 82a0d1a28d12f..0000000000000
--- a/arch/arm/boot/dts/imx6dl-colibri-aster.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6dl.dtsi"
-#include "imx6qdl-colibri.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6DL/S on Colibri Aster Board";
-	compatible = "toradex,colibri_imx6dl-aster", "toradex,colibri_imx6dl",
-		     "fsl,imx6dl";
-
-	aliases {
-		i2c0 = &i2c2;
-		i2c1 = &i2c3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-/* Colibri SSP */
-&ecspi4 {
-	cs-gpios = <
-		&gpio5 2 GPIO_ACTIVE_HIGH
-		&gpio5 4 GPIO_ACTIVE_HIGH
-	>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4 &pinctrl_csi_gpio_2>;
-	status = "okay";
-};
-
-/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
-&i2c3 {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pinctrl_csi_gpio_1
-		&pinctrl_gpio_2
-		&pinctrl_gpio_aster
-		&pinctrl_usbh_oc_1
-		&pinctrl_usbc_id_1
-		&pinctrl_weim_gpio_5
-	>;
-
-	pinctrl_gpio_aster: gpioaster {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x1b0b0
-			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08		0x1b0b0
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b0b0
-		>;
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	status = "okay";
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
deleted file mode 100644
index f50a26dd34c03..0000000000000
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2014-2022 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6dl.dtsi"
-#include "imx6qdl-colibri.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
-		     "fsl,imx6dl";
-
-	aliases {
-		i2c0 = &i2c2;
-		i2c1 = &i2c3;
-	};
-
-	aliases {
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/* Fixed crystal dedicated to mcp251x */
-	clk16m: clock-16m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <16000000>;
-		clock-output-names = "clk16m";
-	};
-};
-
-/* Colibri SSP */
-&ecspi4 {
-	status = "okay";
-
-	mcp251x0: mcp251x@0 {
-		compatible = "microchip,mcp2515";
-		clocks = <&clk16m>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <27 0x2>;
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-		status = "okay";
-	};
-};
-
-/*
- * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
- */
-&i2c3 {
-	status = "okay";
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pinctrl_weim_gpio_1 &pinctrl_weim_gpio_2
-		&pinctrl_weim_gpio_3 &pinctrl_weim_gpio_4
-		&pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6
-		&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1
-	>;
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	status = "okay";
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	/* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */
-	ranges = <0 0 0x08000000 0x02000000
-		  1 0 0x0a000000 0x02000000
-		  2 0 0x0c000000 0x02000000
-		  3 0 0x0e000000 0x02000000>;
-
-	/* SRAM on Colibri nEXT_CS0 */
-	sram@0,0 {
-		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
-		reg = <0 0 0x00010000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		bank-width = <2>;
-		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
-				      0x00000000 0x04000040 0x00000000>;
-	};
-
-	/* SRAM on Colibri nEXT_CS1 */
-	sram@1,0 {
-		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
-		reg = <1 0 0x00010000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		bank-width = <2>;
-		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
-				      0x00000000 0x04000040 0x00000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts
deleted file mode 100644
index 3a6d3889760d6..0000000000000
--- a/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6dl-colibri-iris.dts"
-
-/ {
-	model = "Toradex Colibri iMX6DL/S on Colibri Iris V2 Board";
-	compatible = "toradex,colibri_imx6dl-iris-v2", "toradex,colibri_imx6dl",
-		     "fsl,imx6dl";
-
-	reg_3v3_vmmc: regulator-3v3-vmmc {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
-		regulator-name = "3v3_vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <100>;
-		enable-active-high;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio_iris	&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1>;
-
-	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
-		>;
-	};
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	cap-power-off-card;
-	/* uncomment the following to enable SD card UHS mode if you have a V1.1 module */
-	/* /delete-property/ no-1-8-v; */
-	vmmc-supply = <&reg_3v3_vmmc>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/imx6dl-colibri-iris.dts
deleted file mode 100644
index 4303c88bb2a91..0000000000000
--- a/arch/arm/boot/dts/imx6dl-colibri-iris.dts
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6dl.dtsi"
-#include "imx6qdl-colibri.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6DL/S on Colibri Iris Board";
-	compatible = "toradex,colibri_imx6dl-iris", "toradex,colibri_imx6dl",
-		     "fsl,imx6dl";
-
-	aliases {
-		i2c0 = &i2c2;
-		i2c1 = &i2c3;
-	};
-
-	aliases {
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-/* Colibri SSP */
-&ecspi4 {
-	status = "okay";
-};
-
-&gpio2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_forceoff &pinctrl_uart23_forceoff>;
-
-	/*
-	 * uart-a-on-x13-enable turns the UART transceiver for UART_A on. If one
-	 * wants to turn the transceiver off, that property has to be deleted
-	 * and the gpio handled in userspace.
-	 * The same applies to uart-b-c-on-x14-enable where the UART_B and
-	 * UART_C transceiver is turned on.
-	 */
-	uart-a-on-x13-enable-hog {
-		gpio-hog;
-		gpios = <4 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
-		output-high;
-	};
-
-	uart-b-c-on-x14-enable-hog {
-		gpio-hog;
-		gpios = <8 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
-		output-high;
-	};
-};
-
-/*
- * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
- */
-&i2c3 {
-	status = "okay";
-
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pinctrl_gpio_iris
-		&pinctrl_usbh_oc_1
-		&pinctrl_usbc_id_1
-	>;
-
-	pinctrl_gpio_iris: gpioirisgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21	0x1b0b0
-			MX6QDL_PAD_EIM_A18__GPIO2_IO20	0x1b0b0
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19	0x1b0b0
-			MX6QDL_PAD_EIM_A20__GPIO2_IO18	0x1b0b0
-			MX6QDL_PAD_EIM_A23__GPIO6_IO06	0x1b0b0
-			MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x1b0b0
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03	0x1b0b0
-			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15	0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1_forceoff: uart1forceoffgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart23_forceoff: uart23forceoffgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
-		>;
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	status = "okay";
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts
deleted file mode 100644
index 2b2fc360b8653..0000000000000
--- a/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-sr-som-emmc.dtsi"
-#include "imx6qdl-cubox-i.dtsi"
-
-/ {
-	model = "SolidRun Cubox-i Solo/DualLite (1.5som+emmc)";
-	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts b/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts
deleted file mode 100644
index e09c565d1d1fe..0000000000000
--- a/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-cubox-i.dtsi"
-
-/ {
-	model = "SolidRun Cubox-i Solo/DualLite (1.5som)";
-	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts
deleted file mode 100644
index 2b1b3e193f53c..0000000000000
--- a/arch/arm/boot/dts/imx6dl-cubox-i.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-brcm.dtsi"
-#include "imx6qdl-cubox-i.dtsi"
-
-/ {
-	model = "SolidRun Cubox-i Solo/DualLite";
-	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
deleted file mode 100644
index cece4aafdad87..0000000000000
--- a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
- */
-
-#ifndef __DTS_V1__
-#define __DTS_V1__
-/dts-v1/;
-#endif
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-dfi-fs700-m60.dtsi"
-
-/ {
-	model = "DFI FS700-M60-6DL i.MX6dl Q7 Board";
-	compatible = "dfi,fs700-m60-6dl", "dfi,fs700e-m60", "fsl,imx6dl";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts b/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts
deleted file mode 100644
index 038bb00255567..0000000000000
--- a/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2021 DH electronics GmbH
- *
- * DHCOM iMX6 variant:
- * DHCM-iMX6DL-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
- * DHCOM PCB number: 493-300 or newer
- * PicoITX PCB number: 487-600 or newer
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-dhcom-som.dtsi"
-#include "imx6qdl-dhcom-picoitx.dtsi"
-
-/ {
-	model = "DH electronics i.MX6DL DHCOM on PicoITX";
-	compatible = "dh,imx6dl-dhcom-picoitx", "dh,imx6dl-dhcom-som",
-		     "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
deleted file mode 100644
index 33825b5a8f26c..0000000000000
--- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
+++ /dev/null
@@ -1,388 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2016 Eckelmann AG.
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "imx6dl.dtsi"
-
-/ {
-	model = "Eckelmann CI 4X10 Board";
-	compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl";
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	rmii_clk: clock-rmii {
-		/* This clock is provided by the phy (KSZ8091RNB) */
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-output-names = "enet_ref_pad";
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	siox {
-		compatible = "eckelmann,siox-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_siox>;
-		din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
-		dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-		dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
-		dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&clks {
-	clocks = <&rmii_clk>;
-	clock-names = "enet_ref_pad";
-	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
-	assigned-clock-parents = <&rmii_clk>;
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "everspin,mr25h256";
-		reg = <0>;
-		spi-max-frequency = <15000000>;
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	tpm@0 {
-		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-	};
-};
-
-&gpio2 {
-	gpio-line-names = "buzzer", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names = "", "", "", "", "", "", "", "in2",
-			  "prio2", "prio1", "aux", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "";
-};
-
-&gpio6 {
-	gpio-line-names = "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "in1",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	temperature-sensor@49 {
-		compatible = "ad,ad7414";
-		reg = <0x49>;
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf2127";
-		reg = <0x51>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_hog: hog {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x00000018 /* buzzer */
-			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x00000018 /* OUT_1 */
-			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x00000018 /* OUT_2 */
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x00000018 /* OUT_3 */
-			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x00000000 /* In1 */
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x00000000 /* In2 */
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x00000018 /* unused watchdog pin */
-			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19		0x00000018 /* unused watchdog pin */
-
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 	0x000100a0
-			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI	0x000100a0
-			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO	0x000100a0
-			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25	0x000100a0
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x000100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x000100b1
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x000100b1
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000100b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x0001b098
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x0001b098
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x0001b098
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x0001b098
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x0001b098
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x0001b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x0001b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x0001b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x0001b0b0
-			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0x00000018
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x0001b020
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x0001b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x0001b020
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x0001b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			/* without SION i2c doesn't detect bus busy */
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b820
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b820
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x00000018
-		>;
-	};
-
-	pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x0001b0b0
-		>;
-	};
-
-	pinctrl_siox: sioxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x0001b010	/* DIN */
-			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x0001b010	/* DOUT */
-			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0001b010	/* DCLK */
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x0001b010	/* DLD */
-		>;
-	};
-
-	pinctrl_uart1_dte: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA	0x0001b010
-			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA	0x0001b010
-			MX6QDL_PAD_EIM_D19__UART1_RTS_B 	0x0001b010
-			MX6QDL_PAD_EIM_D20__UART1_CTS_B 	0x0001b010
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x0001b010	/* DCD */
-			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x0001b010	/* DTR */
-			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x0001b010	/* DSR */
-		>;
-	};
-
-	pinctrl_uart2_dte: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x0001b010
-			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x0001b010
-			MX6QDL_PAD_EIM_D28__UART2_RTS_B 	0x0001b010
-			MX6QDL_PAD_EIM_D29__UART2_CTS_B 	0x0001b010
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x0001b010	/* DCD */
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x0001b010	/* DTR */
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x0001b010	/* DSR */
-		>;
-	};
-
-	pinctrl_uart3_dce: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA	0x0001b010
-			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA	0x0001b010
-		>;
-	};
-
-	pinctrl_uart4_dce: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x0001b010
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x0001b010
-			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x0001b010
-		>;
-	};
-
-	pinctrl_uart5_dce: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x0001b010
-			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x0001b010
-			MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x0001b010	/* RTS */
-		>;
-	};
-
-	pinctrl_usbh1: usbh1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__USB_H1_OC		0x0001b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x00017059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x00010059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x00017059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x00017059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x00017059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x00017059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x00017059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x00017059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x00017059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x00017059
-		>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
-	phy-handle = <&phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_dte>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_dte>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-	dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-	dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_dce>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4_dce>;
-	rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5_dce>;
-	rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-emcon-avari.dts b/arch/arm/boot/dts/imx6dl-emcon-avari.dts
deleted file mode 100644
index 407ad8d43c848..0000000000000
--- a/arch/arm/boot/dts/imx6dl-emcon-avari.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
-//
-// Copyright (C) 2018 emtrion GmbH
-//
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-emcon.dtsi"
-#include "imx6qdl-emcon-avari.dtsi"
-
-/ {
-	model = "emtrion SoM emCON-MX6 Solo/Dual-Lite Avari";
-	compatible = "emtrion,emcon-mx6-avari", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw51xx.dts b/arch/arm/boot/dts/imx6dl-gw51xx.dts
deleted file mode 100644
index 9956d12a1245c..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw51xx.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Gateworks Corporation
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw51xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW51XX";
-	compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw52xx.dts b/arch/arm/boot/dts/imx6dl-gw52xx.dts
deleted file mode 100644
index 9ea23dd54f3ce..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw52xx.dts
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Gateworks Corporation
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw52xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX";
-	compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
-};
-
-&i2c3 {
-	adv7180: camera@20 {
-		compatible = "adi,adv7180";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_adv7180>;
-		reg = <0x20>;
-		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-
-		port {
-			adv7180_to_ipu1_csi1_mux: endpoint {
-				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
-				bus-width = <8>;
-			};
-		};
-	};
-};
-
-&ipu1_csi1_from_ipu1_csi1_mux {
-	bus-width = <8>;
-};
-
-&ipu1_csi1_mux_from_parallel_sensor {
-	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
-	bus-width = <8>;
-};
-
-&ipu1_csi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi1>;
-};
-
-&iomuxc {
-	pinctrl_adv7180: adv7180grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
-		>;
-	};
-
-	pinctrl_ipu1_csi1: ipu1_csi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
-			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
-			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
-			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
-			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
-			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
-			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
-			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
-			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
-			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
-			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/imx6dl-gw53xx.dts
deleted file mode 100644
index 182e8194c2490..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw53xx.dts
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Gateworks Corporation
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw53xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
-	compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
-};
-
-&i2c3 {
-	adv7180: camera@20 {
-		compatible = "adi,adv7180";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_adv7180>;
-		reg = <0x20>;
-		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-
-		port {
-			adv7180_to_ipu1_csi1_mux: endpoint {
-				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
-				bus-width = <8>;
-			};
-		};
-	};
-};
-
-&ipu1_csi1_from_ipu1_csi1_mux {
-	bus-width = <8>;
-};
-
-&ipu1_csi1_mux_from_parallel_sensor {
-	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
-	bus-width = <8>;
-};
-
-&ipu1_csi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi1>;
-};
-
-&iomuxc {
-	pinctrl_adv7180: adv7180grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
-		>;
-	};
-
-	pinctrl_ipu1_csi1: ipu1_csi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
-			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
-			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
-			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
-			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
-			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
-			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
-			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
-			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
-			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
-			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw54xx.dts b/arch/arm/boot/dts/imx6dl-gw54xx.dts
deleted file mode 100644
index a106c4e3e3299..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw54xx.dts
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Gateworks Corporation
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw54xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX";
-	compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
-};
-
-&i2c3 {
-	adv7180: camera@20 {
-		compatible = "adi,adv7180";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_adv7180>;
-		reg = <0x20>;
-		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-
-		port {
-			adv7180_to_ipu1_csi1_mux: endpoint {
-				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
-				bus-width = <8>;
-			};
-		};
-	};
-};
-
-&ipu1_csi1_from_ipu1_csi1_mux {
-	bus-width = <8>;
-};
-
-&ipu1_csi1_mux_from_parallel_sensor {
-	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
-	bus-width = <8>;
-};
-
-&ipu1_csi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi1>;
-};
-
-&iomuxc {
-	pinctrl_adv7180: adv7180grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
-		>;
-	};
-
-	pinctrl_ipu1_csi1: ipu1_csi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
-			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
-			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
-			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
-			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
-			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
-			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
-			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
-			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
-			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
-			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw551x.dts b/arch/arm/boot/dts/imx6dl-gw551x.dts
deleted file mode 100644
index 82d5f85722eaf..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw551x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw551x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X";
-	compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw552x.dts b/arch/arm/boot/dts/imx6dl-gw552x.dts
deleted file mode 100644
index 4864a36f9b364..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw552x.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2014 Gateworks Corporation
- */
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw552x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW552X";
-	compatible = "gw,imx6dl-gw552x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw553x.dts b/arch/arm/boot/dts/imx6dl-gw553x.dts
deleted file mode 100644
index 59b8afc36e66c..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw553x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw553x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
-	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw560x.dts b/arch/arm/boot/dts/imx6dl-gw560x.dts
deleted file mode 100644
index 21bdfaf8df53d..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw560x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw560x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X";
-	compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5903.dts b/arch/arm/boot/dts/imx6dl-gw5903.dts
deleted file mode 100644
index 103261ea93343..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5903.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5903.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Duallite/Solo GW5903";
-	compatible = "gw,imx6dl-gw5903", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5904.dts b/arch/arm/boot/dts/imx6dl-gw5904.dts
deleted file mode 100644
index 9c6d3cd3d6a76..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5904.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5904.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904";
-	compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5907.dts b/arch/arm/boot/dts/imx6dl-gw5907.dts
deleted file mode 100644
index 3fa2822beffc8..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5907.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 Gateworks Corporation
- */
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5907.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907";
-	compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5910.dts b/arch/arm/boot/dts/imx6dl-gw5910.dts
deleted file mode 100644
index 0d5e7e5da536d..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5910.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 Gateworks Corporation
- */
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5910.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910";
-	compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5912.dts b/arch/arm/boot/dts/imx6dl-gw5912.dts
deleted file mode 100644
index 5260e0142d63a..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5912.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 Gateworks Corporation
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5912.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912";
-	compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5913.dts b/arch/arm/boot/dts/imx6dl-gw5913.dts
deleted file mode 100644
index b74e533c8e679..0000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5913.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 Gateworks Corporation
- */
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5913.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913";
-	compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts
deleted file mode 100644
index a63f742f20d99..0000000000000
--- a/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
- * Based on dt work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-sr-som-emmc.dtsi"
-#include "imx6qdl-hummingboard.dtsi"
-
-/ {
-	model = "SolidRun HummingBoard Solo/DualLite (1.5som+emmc)";
-	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts
deleted file mode 100644
index 66a06cf3cdf3f..0000000000000
--- a/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
- * Based on dt work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-hummingboard.dtsi"
-
-/ {
-	model = "SolidRun HummingBoard Solo/DualLite (1.5som)";
-	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
deleted file mode 100644
index cbd02eb486e16..0000000000000
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
- * Based on dt work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-brcm.dtsi"
-#include "imx6qdl-hummingboard.dtsi"
-
-/ {
-	model = "SolidRun HummingBoard Solo/DualLite";
-	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts
deleted file mode 100644
index 80313c13bcdbf..0000000000000
--- a/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Device Tree file for SolidRun HummingBoard2
- * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
- * Based on work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-emmc.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-hummingboard2.dtsi"
-
-/ {
-	model = "SolidRun HummingBoard2 Solo/DualLite (1.5som+emmc)";
-	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts
deleted file mode 100644
index e61ef1156f8b5..0000000000000
--- a/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Device Tree file for SolidRun HummingBoard2
- * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
- * Based on work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-hummingboard2.dtsi"
-
-/ {
-	model = "SolidRun HummingBoard2 Solo/DualLite (1.5som)";
-	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2.dts b/arch/arm/boot/dts/imx6dl-hummingboard2.dts
deleted file mode 100644
index b12cd87f3f948..0000000000000
--- a/arch/arm/boot/dts/imx6dl-hummingboard2.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
- * Based on dt work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-brcm.dtsi"
-#include "imx6qdl-hummingboard2.dtsi"
-#include "imx6qdl-hummingboard2-emmc.dtsi"
-
-/ {
-	model = "SolidRun HummingBoard2 Solo/DualLite";
-	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
deleted file mode 100644
index d8f3821a0ffdc..0000000000000
--- a/arch/arm/boot/dts/imx6dl-icore-mipi.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright (C) 2018 Engicam S.r.l.
- * Copyright (C) 2018 Amarula Solutions B.V.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-icore-1.5.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";
-	compatible = "engicam,imx6-icore", "fsl,imx6dl";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&usdhc3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
deleted file mode 100644
index 73d710d34b9d5..0000000000000
--- a/arch/arm/boot/dts/imx6dl-icore-rqs.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- */
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-icore-rqs.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
-	compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
deleted file mode 100644
index 80fa60607ab16..0000000000000
--- a/arch/arm/boot/dts/imx6dl-icore.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- */
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-icore.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 DualLite/Solo Starter Kit";
-	compatible = "engicam,imx6-icore", "fsl,imx6dl";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&i2c1 {
-	max11801: touchscreen@48 {
-		compatible = "maxim,max11801";
-		reg = <0x48>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi
deleted file mode 100644
index a864fdbd5f16a..0000000000000
--- a/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi
+++ /dev/null
@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
- */
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-kontron-samx6i.dtsi"
-
-/ {
-	model = "Kontron SMARC sAMX6i Dual-Lite/Solo";
-	compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts
deleted file mode 100644
index fa823988312d6..0000000000000
--- a/arch/arm/boot/dts/imx6dl-lanmcu.dts
+++ /dev/null
@@ -1,474 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2019 Protonic Holland
- * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include "imx6dl.dtsi"
-
-/ {
-	model = "Van der Laan LANMCU";
-	compatible = "vdl,lanmcu", "fsl,imx6dl";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	clock_ksz8081: clock-ksz8081 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-output-names = "enet_ref_pad";
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000 0>;
-		brightness-levels = <0 1000>;
-		num-interpolated-steps = <20>;
-		default-brightness-level = <19>;
-	};
-
-	display {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-0 = <&pinctrl_ipu1_disp>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-0 {
-			label = "debug0";
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	panel {
-		compatible = "edt,etm0700g0bdh6";
-		backlight = <&backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	reg_otg_vbus: regulator-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "otg-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_npd>;
-		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
-	};
-
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&clks {
-	clocks = <&clock_ksz8081>;
-	clock-names = "enet_ref_pad";
-	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
-	assigned-clock-parents = <&clock_ksz8081>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-handle = <&rgmii_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ8081RNA PHY */
-		rgmii_phy: ethernet-phy@0 {
-			reg = <0>;
-			interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "SD1_CD", "", "", "", "", "", "",
-		"DEBUG_0", "BL_PWM", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "ENET_LED_GREEN",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "TS_INT", "USB_OTG1_OC", "USB_OTG1_PWR", "",
-		"", "", "", "", "UART2_CTS", "", "UART3_CTS", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "ENET_RST", "ENET_INT",
-		"", "", "I2C1_SDA", "I2C1_SCL", "", "", "", "";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "WLAN_REG_ON", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio7 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"EMMC_RST", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	/* additional i2c devices are added automatically by the boot loader */
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5406";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ts_edt>;
-		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
-
-		touchscreen-size-x = <1792>;
-		touchscreen-size-y = <1024>;
-
-		touchscreen-fuzz-x = <0>;
-		touchscreen-fuzz-y = <0>;
-
-		/* Touch screen calibration */
-		threshold = <50>;
-		gain = <5>;
-		offset = <10>;
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display_in>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	linux,rs485-enabled-at-boot-time;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	linux,rs485-enabled-at-boot-time;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	disable-wp;
-	cap-sd-highspeed;
-	no-mmc;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	no-1-8-v;
-	non-removable;
-	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	no-sd;
-	no-sdio;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			/* MX6QDL_ENET_PINGRP4 */
-			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
-
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
-			/* Phy reset */
-			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22		0x1b0b0
-			/* nINTRP */
-			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23		0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_disp: ipudisp1grp {
-		fsl,pins = <
-			/* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x30
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x30
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x30
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x30
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x30
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x30
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x30
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x30
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x30
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x30
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x30
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x30
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x30
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x30
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x30
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x30
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x30
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x30
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x30
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x30
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x30
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x30
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT			0x8
-		>;
-	};
-
-	pinctrl_ts_edt: ts1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x1b0b0
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_RX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D28__UART2_CTS_B			0x130b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D30__UART3_CTS_B			0x130b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
-			/* power enable, high active */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
-			MX6QDL_PAD_GPIO_1__SD1_CD_B			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD			0x170b9
-			MX6QDL_PAD_SD2_CLK__SD2_CLK			0x100b9
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0			0x170b9
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1			0x170b9
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2			0x170b9
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3			0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
-			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
-			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
-		>;
-	};
-
-	pinctrl_wifi_npd: wifigrp {
-		fsl,pins = <
-			/* WL_REG_ON */
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10		0x13069
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
deleted file mode 100644
index 028951955bdee..0000000000000
--- a/arch/arm/boot/dts/imx6dl-mamoj.dts
+++ /dev/null
@@ -1,496 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 BTicino
- * Copyright (C) 2018 Amarula Solutions B.V.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6dl.dtsi"
-
-/ {
-	model = "BTicino i.MX6DL Mamoj board";
-	compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
-		brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>;
-		default-brightness-level = <7>;
-	};
-
-	display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "rocktech,rk070er9427";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_lcd_lr>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif_pwr>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	reg_lcd_3v3: regulator-lcd-dvdd {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-dvdd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 1 0>;
-		enable-active-high;
-		startup-delay-us = <21000>;
-	};
-
-	reg_lcd_power: regulator-lcd-power {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-enable";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 6 0>;
-		enable-active-high;
-		vin-supply = <&reg_lcd_3v3>;
-	};
-
-	reg_lcd_vgl: regulator-lcd-vgl {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-vgl";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <6000>;
-		enable-active-high;
-		vin-supply = <&reg_lcd_power>;
-	};
-
-	reg_lcd_vgh: regulator-lcd-vgh {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-vgh";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <6000>;
-		enable-active-high;
-		vin-supply = <&reg_lcd_avdd>;
-	};
-
-	reg_lcd_vcom: regulator-lcd-vcom {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-vcom";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <11000>;
-		enable-active-high;
-		vin-supply = <&reg_lcd_vgh>;
-	};
-
-	reg_lcd_lr: regulator-lcd-lr {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-lr";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_lcd_vcom>;
-	};
-
-	reg_lcd_avdd: regulator-lcd-avdd {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-avdd";
-		regulator-min-microvolt = <10280000>;
-		regulator-max-microvolt = <10280000>;
-		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <6000>;
-		enable-active-high;
-		vin-supply = <&reg_lcd_vgl>;
-	};
-
-	reg_usb_host: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbhost-vbus";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbhost>;
-		regulator-min-microvolt = <50000000>;
-		regulator-max-microvolt = <50000000>;
-		gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_wl18xx_vmmc:  regulator-wl18xx-vmcc {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1807";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wlan>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "mii";
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	pfuze100: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			/* CPU vdd_arm core */
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* SOC vdd_soc */
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* I/O power GEN_3V3 */
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* DDR memory */
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* DDR memory */
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* not used */
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			/* not used */
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			/* PMIC vsnvs. EX boot mode */
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* not used */
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			/* not used */
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			/* not used */
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			/* 1v8 general power */
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			/* 2v8 general power IMX6 */
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			/* 3v3 Ethernet */
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host>;
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_wl18xx_vmmc>;
-	no-1-8-v;
-	non-removable;
-	wakeup-source;
-	keep-power-in-suspend;
-	cap-power-off-card;
-	max-frequency = <25000000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1837";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	non-removable;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b1
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2	0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_GPIO_19__ENET_TX_ER		0x1b0b0
-			MX6QDL_PAD_GPIO_18__ENET_RX_CLK		0x1b0b1
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2	0x1b0b0
-			MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3      0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
-			MX6QDL_PAD_KEY_COL3__ENET_CRS		0x1b0b0
-			MX6QDL_PAD_KEY_ROW1__ENET_COL		0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL     0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA     0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__I2C4_SCL	0x4001b8b1
-			MX6QDL_PAD_GPIO_8__I2C4_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10 /* VDOUT_HSYNC */
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10 /* VDOUT_VSYNC */
-			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04	   0x10 /* VDOUT_RESET */
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-		>;
-	};
-
-	pinctrl_ipu1_lcdif_pwr: ipu1lcdifpwrgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x40013058 /* EN_LCD33V */
-			MX6QDL_PAD_SD4_DAT5__GPIO2_IO13		0x4001b0b0 /* EN_AVDD */
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x40013058 /* ENVGH */
-			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x40013058 /* ENVGL */
-			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x40013058 /* LCD_POWER */
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x40013058 /* EN_VCOM_LCD */
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x40013058 /* LCD_L_R */
-			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x40013058 /* LCD_U_D */
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbhost: usbhostgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x4001b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17069
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10079
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
-		>;
-	};
-
-	pinctrl_wlan: wlangrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21	0x4001b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-mba6.dtsi b/arch/arm/boot/dts/imx6dl-mba6.dtsi
deleted file mode 100644
index b749b424bbd6e..0000000000000
--- a/arch/arm/boot/dts/imx6dl-mba6.dtsi
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * Copyright 2013-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-&ethphy {
-	rxdv-skew-ps = <180>;
-	txen-skew-ps = <0>;
-	rxd3-skew-ps = <180>;
-	rxd2-skew-ps = <180>;
-	rxd1-skew-ps = <180>;
-	rxd0-skew-ps = <180>;
-	txd3-skew-ps = <120>;
-	txd2-skew-ps = <0>;
-	txd1-skew-ps = <300>;
-	txd0-skew-ps = <120>;
-	txc-skew-ps = <1860>;
-	rxc-skew-ps = <1860>;
-};
diff --git a/arch/arm/boot/dts/imx6dl-mba6a.dts b/arch/arm/boot/dts/imx6dl-mba6a.dts
deleted file mode 100644
index df0a96b28af0c..0000000000000
--- a/arch/arm/boot/dts/imx6dl-mba6a.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * Copyright 2013-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6dl-tqma6a.dtsi"
-#include "imx6qdl-mba6.dtsi"
-#include "imx6qdl-mba6a.dtsi"
-#include "imx6dl-mba6.dtsi"
-
-/ {
-	model = "TQ TQMa6S/DL on MBa6x";
-	compatible = "tq,imx6dl-mba6x-a", "tq,mba6a",
-		     "tq,imx6dl-tqma6dl-a", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-mba6b.dts b/arch/arm/boot/dts/imx6dl-mba6b.dts
deleted file mode 100644
index 610b19d2db0fc..0000000000000
--- a/arch/arm/boot/dts/imx6dl-mba6b.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * Copyright 2013-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6dl-tqma6b.dtsi"
-#include "imx6qdl-mba6.dtsi"
-#include "imx6qdl-mba6b.dtsi"
-#include "imx6dl-mba6.dtsi"
-
-/ {
-	model = "TQ TQMa6S/DL on MBa6x";
-	compatible = "tq,imx6dl-mba6x-b", "tq,mba6b",
-		     "tq,imx6dl-tqma6dl-b", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts
deleted file mode 100644
index 61fa30991d675..0000000000000
--- a/arch/arm/boot/dts/imx6dl-nit6xlite.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2015 Boundary Devices, Inc.
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-nit6xlite.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board";
-	compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
deleted file mode 100644
index ef58d3b0ea0d4..0000000000000
--- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2013 Boundary Devices, Inc.
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-nitrogen6x.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board";
-	compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
deleted file mode 100644
index d906a7f05aaad..0000000000000
--- a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 PHYTEC Messtechnik GmbH
- * Author: Christian Hemp <c.hemp@phytec.de>
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-phytec-phycore-som.dtsi"
-#include "imx6qdl-phytec-mira.dtsi"
-#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
-#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
-#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
-
-/ {
-	model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND";
-	compatible = "phytec,imx6dl-pbac06-nand", "phytec,imx6dl-pbac06",
-		     "phytec,imx6qdl-pcm058", "fsl,imx6dl";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
-&ethphy {
-	max-speed = <100>;
-};
-
-&fec {
-	status = "okay";
-};
-
-&gpmi {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c_rtc {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
-
-&usdhc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
deleted file mode 100644
index 0a07cc6f815e1..0000000000000
--- a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- */
-
-/dts-v1/;
-#include "imx6dl-phytec-pfla02.dtsi"
-#include "imx6qdl-phytec-pbab01.dtsi"
-
-/ {
-	model = "Phytec phyFLEX-i.MX6 DualLite/Solo Carrier-Board";
-	compatible = "phytec,imx6dl-pbab01", "phytec,imx6dl-pfla02", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
deleted file mode 100644
index 6f8aaf5244257..0000000000000
--- a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- */
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-phytec-pfla02.dtsi"
-
-/ {
-	model = "Phytec phyFLEX-i.MX6 DualLite/Solo";
-	compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts
deleted file mode 100644
index d85b15a8c1272..0000000000000
--- a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2018 Technexion Ltd.
-//
-// Author: Wig Cheng <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-pico-pi.dtsi"
-
-/ {
-	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Dwarf baseboard";
-	compatible = "technexion,imx6dl-pico-dwarf", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts
deleted file mode 100644
index 08fedcbcc91b6..0000000000000
--- a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2018 Technexion Ltd.
-//
-// Author: Wig Cheng <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-pico-hobbit.dtsi"
-
-/ {
-	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Hobbit baseboard";
-	compatible = "technexion,imx6dl-pico-hobbit", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-pico-nymph.dts b/arch/arm/boot/dts/imx6dl-pico-nymph.dts
deleted file mode 100644
index 32ccfc5d41cee..0000000000000
--- a/arch/arm/boot/dts/imx6dl-pico-nymph.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2018 Technexion Ltd.
-//
-// Author: Wig Cheng <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-pico-pi.dtsi"
-
-/ {
-	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Nymph baseboard";
-	compatible = "technexion,imx6dl-pico-nymph", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-pico-pi.dts b/arch/arm/boot/dts/imx6dl-pico-pi.dts
deleted file mode 100644
index 4590e8ad9a91b..0000000000000
--- a/arch/arm/boot/dts/imx6dl-pico-pi.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2018 Technexion Ltd.
-//
-// Author: Wig Cheng <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-pico-pi.dtsi"
-
-/ {
-	model = "TechNexion PICO-IMX6 DualLite/Solo Board and PI baseboard";
-	compatible = "technexion,imx6dl-pico-pi", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h
deleted file mode 100644
index 9d88d09f9bf6f..0000000000000
--- a/arch/arm/boot/dts/imx6dl-pinfunc.h
+++ /dev/null
@@ -1,1088 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DTS_IMX6DL_PINFUNC_H
-#define __DTS_IMX6DL_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x04c 0x360 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x04c 0x360 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x04c 0x360 0x7f8 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x04c 0x360 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x04c 0x360 0x8fc 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x04c 0x360 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x04c 0x360 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x050 0x364 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x050 0x364 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x050 0x364 0x800 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x050 0x364 0x8fc 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x050 0x364 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x050 0x364 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x050 0x364 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x054 0x368 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x054 0x368 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x054 0x368 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x054 0x368 0x914 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x054 0x368 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x054 0x368 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x058 0x36c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x058 0x36c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x058 0x36c 0x914 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x058 0x36c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x058 0x36c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x058 0x36c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x05c 0x370 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x05c 0x370 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x05c 0x370 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x05c 0x370 0x91c 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x05c 0x370 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x05c 0x370 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x060 0x374 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x060 0x374 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x060 0x374 0x91c 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x060 0x374 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x060 0x374 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x060 0x374 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x064 0x378 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x064 0x378 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x064 0x378 0x910 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x064 0x378 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x064 0x378 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x064 0x378 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x068 0x37c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x068 0x37c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x068 0x37c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x068 0x37c 0x910 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x068 0x37c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x068 0x37c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x06c 0x380 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x06c 0x380 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x06c 0x380 0x918 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x06c 0x380 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x06c 0x380 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x06c 0x380 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x070 0x384 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x070 0x384 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x070 0x384 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x070 0x384 0x918 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x070 0x384 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x074 0x388 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x074 0x388 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x074 0x388 0x7d8 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x074 0x388 0x8c0 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x074 0x388 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x074 0x388 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x074 0x388 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x078 0x38c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x078 0x38c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x078 0x38c 0x7e0 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x078 0x38c 0x8cc 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x078 0x38c 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x078 0x38c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x078 0x38c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x07c 0x390 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x07c 0x390 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x07c 0x390 0x7dc 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x07c 0x390 0x8c4 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x07c 0x390 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x07c 0x390 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x07c 0x390 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x080 0x394 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x080 0x394 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x080 0x394 0x7e4 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x080 0x394 0x8d0 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x080 0x394 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x080 0x394 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x080 0x394 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x084 0x398 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x084 0x398 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x084 0x398 0x7f4 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x084 0x398 0x8c8 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x084 0x398 0x86c 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x084 0x398 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x084 0x398 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x088 0x39c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x088 0x39c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x088 0x39c 0x7fc 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x088 0x39c 0x8d4 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x088 0x39c 0x868 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x088 0x39c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x088 0x39c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x08c 0x3a0 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x08c 0x3a0 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x08c 0x3a0 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x08c 0x3a0 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x090 0x3a4 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x090 0x3a4 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x090 0x3a4 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x090 0x3a4 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x094 0x3a8 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x094 0x3a8 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x094 0x3a8 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x098 0x3ac 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x098 0x3ac 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x098 0x3ac 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x098 0x3ac 0x000 0x7 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x09c 0x3b0 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__LCD_CLK            0x09c 0x3b0 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x09c 0x3b0 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__LCD_WR_RWN         0x09c 0x3b0 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN15__LCD_ENABLE            0x0a0 0x3b4 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN15__LCD_RD_E              0x0a0 0x3b4 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN2__LCD_HSYNC              0x0a4 0x3b8 0x8d8 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN2__LCD_RS                 0x0a4 0x3b8 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN3__LCD_VSYNC              0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN3__LCD_CS                 0x0a8 0x3bc 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN4__LCD_BUSY               0x0ac 0x3c0 0x8d8 0x1 0x1
-#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x0ac 0x3c0 0x92c 0x3 0x0
-#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN4__LCD_RESET              0x0ac 0x3c0 0x000 0x8 0x0
-#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT0__LCD_DATA00           0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT1__LCD_DATA01           0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT10__LCD_DATA10          0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT11__LCD_DATA11          0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT12__LCD_DATA12          0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT13__LCD_DATA13          0x0c4 0x3d8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x0c4 0x3d8 0x7bc 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT14__LCD_DATA14          0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x0c8 0x3dc 0x7b8 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT15__LCD_DATA15          0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x0cc 0x3e0 0x7e8 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x0cc 0x3e0 0x804 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT16__LCD_DATA16          0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x0d0 0x3e4 0x7fc 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x0d0 0x3e4 0x7c0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x0d0 0x3e4 0x8e8 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT17__LCD_DATA17          0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x0d4 0x3e8 0x7f8 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x0d4 0x3e8 0x7b4 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x0d4 0x3e8 0x8ec 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT18__LCD_DATA18          0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x0d8 0x3ec 0x800 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x0d8 0x3ec 0x7c4 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x0d8 0x3ec 0x7a4 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT19__LCD_DATA19          0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x0dc 0x3f0 0x7f4 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x0dc 0x3f0 0x7b0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x0dc 0x3f0 0x7a0 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT2__LCD_DATA02           0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x0e0 0x3f4 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT20__LCD_DATA20          0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x0e4 0x3f8 0x7d8 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x0e4 0x3f8 0x7a8 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT21__LCD_DATA21          0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x0e8 0x3fc 0x7e0 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x0e8 0x3fc 0x79c 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x0ec 0x400 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT22__LCD_DATA22          0x0ec 0x400 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x0ec 0x400 0x7dc 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x0ec 0x400 0x7ac 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x0ec 0x400 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x0f0 0x404 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT23__LCD_DATA23          0x0f0 0x404 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x0f0 0x404 0x7e4 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x0f0 0x404 0x798 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x0f0 0x404 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x0f4 0x408 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT3__LCD_DATA03           0x0f4 0x408 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x0f4 0x408 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x0f4 0x408 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x0f8 0x40c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT4__LCD_DATA04           0x0f8 0x40c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x0f8 0x40c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x0f8 0x40c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x0fc 0x410 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT5__LCD_DATA05           0x0fc 0x410 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x0fc 0x410 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x0fc 0x410 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x0fc 0x410 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x100 0x414 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT6__LCD_DATA06           0x100 0x414 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x100 0x414 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x100 0x414 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x100 0x414 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x104 0x418 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT7__LCD_DATA07           0x104 0x418 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x104 0x418 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x104 0x418 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x108 0x41c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT8__LCD_DATA08           0x108 0x41c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x108 0x41c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x108 0x41c 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x108 0x41c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x10c 0x420 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT9__LCD_DATA09           0x10c 0x420 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x10c 0x420 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x10c 0x420 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x10c 0x420 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x110 0x4e0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x110 0x4e0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK        0x110 0x4e0 0x8b8 0x2 0x0
-#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x110 0x4e0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x110 0x4e0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A16__EPDC_DATA00             0x110 0x4e0 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x114 0x4e4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x114 0x4e4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12        0x114 0x4e4 0x890 0x2 0x0
-#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x114 0x4e4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x114 0x4e4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A17__EPDC_PWR_STAT           0x114 0x4e4 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x118 0x4e8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x118 0x4e8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13        0x118 0x4e8 0x894 0x2 0x0
-#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x118 0x4e8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x118 0x4e8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A18__EPDC_PWR_CTRL0          0x118 0x4e8 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x11c 0x4ec 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x11c 0x4ec 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14        0x11c 0x4ec 0x898 0x2 0x0
-#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x11c 0x4ec 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x11c 0x4ec 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A19__EPDC_PWR_CTRL1          0x11c 0x4ec 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x120 0x4f0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x120 0x4f0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15        0x120 0x4f0 0x89c 0x2 0x0
-#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x120 0x4f0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x120 0x4f0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A20__EPDC_PWR_CTRL2          0x120 0x4f0 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x124 0x4f4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x124 0x4f4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16        0x124 0x4f4 0x8a0 0x2 0x0
-#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x124 0x4f4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x124 0x4f4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A21__EPDC_GDCLK              0x124 0x4f4 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x128 0x4f8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x128 0x4f8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17        0x128 0x4f8 0x8a4 0x2 0x0
-#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x128 0x4f8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x128 0x4f8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A22__EPDC_GDSP               0x128 0x4f8 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x12c 0x4fc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x12c 0x4fc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18        0x12c 0x4fc 0x8a8 0x2 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x12c 0x4fc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x12c 0x4fc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x12c 0x4fc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A23__EPDC_GDOE               0x12c 0x4fc 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x130 0x500 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x130 0x500 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19        0x130 0x500 0x8ac 0x2 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x130 0x500 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x130 0x500 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x130 0x500 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A24__EPDC_GDRL               0x130 0x500 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x134 0x504 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x134 0x504 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x134 0x504 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x134 0x504 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x134 0x504 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x134 0x504 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x134 0x504 0x85c 0x6 0x0
-#define MX6QDL_PAD_EIM_A25__EPDC_DATA15             0x134 0x504 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A25__EIM_ACLK_FREERUN        0x134 0x504 0x000 0x9 0x0
-#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x138 0x508 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x138 0x508 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x138 0x508 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_BCLK__EPDC_SDCE9             0x138 0x508 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x13c 0x50c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x13c 0x50c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x13c 0x50c 0x7f4 0x2 0x2
-#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x13c 0x50c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_CS0__EPDC_DATA06             0x13c 0x50c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x140 0x510 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x140 0x510 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x140 0x510 0x7fc 0x2 0x2
-#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x140 0x510 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_CS1__EPDC_DATA08             0x140 0x510 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x144 0x514 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x144 0x514 0x7d8 0x1 0x2
-#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x144 0x514 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18        0x144 0x514 0x8a8 0x3 0x1
-#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x144 0x514 0x864 0x4 0x0
-#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x144 0x514 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x144 0x514 0x874 0x6 0x0
-#define MX6QDL_PAD_EIM_D16__EPDC_DATA10             0x144 0x514 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x148 0x518 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x148 0x518 0x7dc 0x1 0x2
-#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x148 0x518 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK        0x148 0x518 0x8b8 0x3 0x1
-#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x148 0x518 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x148 0x518 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x148 0x518 0x878 0x6 0x0
-#define MX6QDL_PAD_EIM_D17__EPDC_VCOM0              0x148 0x518 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x14c 0x51c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x14c 0x51c 0x7e0 0x1 0x2
-#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x14c 0x51c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17        0x14c 0x51c 0x8a4 0x3 0x1
-#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x14c 0x51c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x14c 0x51c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x14c 0x51c 0x87c 0x6 0x0
-#define MX6QDL_PAD_EIM_D18__EPDC_VCOM1              0x14c 0x51c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x150 0x520 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x150 0x520 0x7e8 0x1 0x1
-#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x150 0x520 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16        0x150 0x520 0x8a0 0x3 0x1
-#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x150 0x520 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x150 0x520 0x8f8 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x150 0x520 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x150 0x520 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D19__EPDC_DATA12             0x150 0x520 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x154 0x524 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x154 0x524 0x808 0x1 0x0
-#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x154 0x524 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15        0x154 0x524 0x89c 0x3 0x1
-#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x154 0x524 0x8f8 0x4 0x1
-#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x154 0x524 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x154 0x524 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x154 0x524 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x158 0x528 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x158 0x528 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x158 0x528 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D21__IPU1_CSI1_DATA11        0x158 0x528 0x88c 0x3 0x0
-#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x158 0x528 0x920 0x4 0x0
-#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x158 0x528 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x158 0x528 0x868 0x6 0x1
-#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x158 0x528 0x8f0 0x7 0x0
-#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x15c 0x52c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x15c 0x52c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x15c 0x52c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D22__IPU1_CSI1_DATA10        0x15c 0x52c 0x888 0x3 0x0
-#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x15c 0x52c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x15c 0x52c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x15c 0x52c 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D22__EPDC_SDCE6              0x15c 0x52c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x160 0x530 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x160 0x530 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x160 0x530 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x160 0x530 0x908 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x160 0x530 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_CSI1_DATA_EN       0x160 0x530 0x8b0 0x4 0x0
-#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x160 0x530 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x160 0x530 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x160 0x530 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D23__EPDC_DATA11             0x160 0x530 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x164 0x534 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x164 0x534 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x164 0x534 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x164 0x534 0x90c 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x164 0x534 0x7ec 0x3 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x164 0x534 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x164 0x534 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x164 0x534 0x7bc 0x6 0x1
-#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x164 0x534 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D24__EPDC_SDCE7              0x164 0x534 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x168 0x538 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x168 0x538 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x168 0x538 0x90c 0x2 0x1
-#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x168 0x538 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x168 0x538 0x7f0 0x3 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x168 0x538 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x168 0x538 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x168 0x538 0x7b8 0x6 0x1
-#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x168 0x538 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D25__EPDC_SDCE8              0x168 0x538 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x16c 0x53c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x16c 0x53c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x16c 0x53c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14        0x16c 0x53c 0x898 0x3 0x1
-#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x16c 0x53c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x16c 0x53c 0x904 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x16c 0x53c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x16c 0x53c 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x16c 0x53c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D26__EPDC_SDOED              0x16c 0x53c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x170 0x540 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x170 0x540 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x170 0x540 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13        0x170 0x540 0x894 0x3 0x1
-#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x170 0x540 0x904 0x4 0x1
-#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x170 0x540 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x170 0x540 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x170 0x540 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x170 0x540 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D27__EPDC_SDOE               0x170 0x540 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x174 0x544 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x174 0x544 0x86c 0x1 0x1
-#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x174 0x544 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_CSI1_DATA12        0x174 0x544 0x890 0x3 0x1
-#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x174 0x544 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x174 0x544 0x900 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x174 0x544 0x900 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x174 0x544 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x174 0x544 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x174 0x544 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x174 0x544 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D28__EPDC_PWR_CTRL3          0x174 0x544 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x178 0x548 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x178 0x548 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x178 0x548 0x808 0x2 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x178 0x548 0x900 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x178 0x548 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x178 0x548 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x178 0x548 0x900 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x178 0x548 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC         0x178 0x548 0x8bc 0x6 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x178 0x548 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D29__EPDC_PWR_WAKE           0x178 0x548 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x17c 0x54c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x17c 0x54c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x17c 0x54c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x17c 0x54c 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x17c 0x54c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x17c 0x54c 0x908 0x4 0x1
-#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x17c 0x54c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x17c 0x54c 0x924 0x6 0x0
-#define MX6QDL_PAD_EIM_D30__EPDC_SDOEZ              0x17c 0x54c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x180 0x550 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x180 0x550 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x180 0x550 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x180 0x550 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x180 0x550 0x908 0x4 0x2
-#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x180 0x550 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x180 0x550 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x180 0x550 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D31__EPDC_SDCLK_P            0x180 0x550 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D31__EIM_ACLK_FREERUN        0x180 0x550 0x000 0x9 0x0
-#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x184 0x554 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x184 0x554 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU1_CSI1_DATA09        0x184 0x554 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x184 0x554 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x184 0x554 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA0__EPDC_SDCLK_N            0x184 0x554 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x188 0x558 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x188 0x558 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU1_CSI1_DATA08        0x188 0x558 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x188 0x558 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x188 0x558 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA1__EPDC_SDLE               0x188 0x558 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x18c 0x55c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x18c 0x55c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN      0x18c 0x55c 0x8b0 0x2 0x1
-#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x18c 0x55c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x18c 0x55c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA10__EPDC_DATA01            0x18c 0x55c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x190 0x560 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x190 0x560 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU1_CSI1_HSYNC        0x190 0x560 0x8b4 0x2 0x0
-#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x190 0x560 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x190 0x560 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA11__EPDC_DATA03            0x190 0x560 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x194 0x564 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x194 0x564 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU1_CSI1_VSYNC        0x194 0x564 0x8bc 0x2 0x1
-#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x194 0x564 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x194 0x564 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA12__EPDC_DATA02            0x194 0x564 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x198 0x568 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x198 0x568 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x198 0x568 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x198 0x568 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA13__EPDC_DATA13            0x198 0x568 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x19c 0x56c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x19c 0x56c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x19c 0x56c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x19c 0x56c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA14__EPDC_DATA14            0x19c 0x56c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x1a0 0x570 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x1a0 0x570 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x1a0 0x570 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x1a0 0x570 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x1a0 0x570 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA15__EPDC_DATA09            0x1a0 0x570 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x1a4 0x574 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x1a4 0x574 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU1_CSI1_DATA07        0x1a4 0x574 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x1a4 0x574 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x1a4 0x574 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA2__EPDC_BDR0               0x1a4 0x574 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x1a8 0x578 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x1a8 0x578 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU1_CSI1_DATA06        0x1a8 0x578 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x1a8 0x578 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x1a8 0x578 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA3__EPDC_BDR1               0x1a8 0x578 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x1ac 0x57c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x1ac 0x57c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU1_CSI1_DATA05        0x1ac 0x57c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x1ac 0x57c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x1ac 0x57c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA4__EPDC_SDCE0              0x1ac 0x57c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x1b0 0x580 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x1b0 0x580 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU1_CSI1_DATA04        0x1b0 0x580 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x1b0 0x580 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x1b0 0x580 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA5__EPDC_SDCE1              0x1b0 0x580 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x1b4 0x584 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x1b4 0x584 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU1_CSI1_DATA03        0x1b4 0x584 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x1b4 0x584 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x1b4 0x584 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA6__EPDC_SDCE2              0x1b4 0x584 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x1b8 0x588 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x1b8 0x588 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU1_CSI1_DATA02        0x1b8 0x588 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x1b8 0x588 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x1b8 0x588 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA7__EPDC_SDCE3              0x1b8 0x588 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x1bc 0x58c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x1bc 0x58c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU1_CSI1_DATA01        0x1bc 0x58c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x1bc 0x58c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x1bc 0x58c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA8__EPDC_SDCE4              0x1bc 0x58c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x1c0 0x590 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x1c0 0x590 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU1_CSI1_DATA00        0x1c0 0x590 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x1c0 0x590 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x1c0 0x590 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA9__EPDC_SDCE5              0x1c0 0x590 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x1c4 0x594 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x1c4 0x594 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU1_CSI1_DATA11        0x1c4 0x594 0x88c 0x2 0x1
-#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x1c4 0x594 0x7d4 0x4 0x0
-#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x1c4 0x594 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x1c4 0x594 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB0__EPDC_PWR_COM            0x1c4 0x594 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x1c8 0x598 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x1c8 0x598 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU1_CSI1_DATA10        0x1c8 0x598 0x888 0x2 0x1
-#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x1c8 0x598 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x1c8 0x598 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB1__EPDC_SDSHR              0x1c8 0x598 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x1cc 0x59c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x1cc 0x59c 0x7e4 0x1 0x2
-#define MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19        0x1cc 0x59c 0x8ac 0x3 0x1
-#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x1cc 0x59c 0x860 0x4 0x0
-#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x1cc 0x59c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x1cc 0x59c 0x870 0x6 0x0
-#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x1cc 0x59c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB2__EPDC_DATA05             0x1cc 0x59c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x1d0 0x5a0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x1d0 0x5a0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x1d0 0x5a0 0x908 0x2 0x3
-#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x1d0 0x5a0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x1d0 0x5a0 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC         0x1d0 0x5a0 0x8b4 0x4 0x1
-#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x1d0 0x5a0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x1d0 0x5a0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x1d0 0x5a0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB3__EPDC_SDCE0              0x1d0 0x5a0 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB3__EIM_ACLK_FREERUN        0x1d0 0x5a0 0x000 0x9 0x0
-#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x1d4 0x5a4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x1d4 0x5a4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x1d4 0x5a4 0x804 0x2 0x1
-#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x1d4 0x5a4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x1d4 0x5a4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_LBA__EPDC_DATA04             0x1d4 0x5a4 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x1d8 0x5a8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x1d8 0x5a8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x1d8 0x5a8 0x7f8 0x2 0x2
-#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x1d8 0x5a8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_OE__EPDC_PWR_IRQ             0x1d8 0x5a8 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x1dc 0x5ac 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x1dc 0x5ac 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x1dc 0x5ac 0x800 0x2 0x2
-#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x1dc 0x5ac 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x1dc 0x5ac 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_RW__EPDC_DATA07              0x1dc 0x5ac 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x1e0 0x5b0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x1e0 0x5b0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x1e0 0x5b0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x1e0 0x5b0 0x000 0x7 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1e4 0x5b4 0x828 0x1 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1e4 0x5b4 0x840 0x2 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1e4 0x5b4 0x8f4 0x3 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1e4 0x5b4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1e8 0x5b8 0x8e0 0x0 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1e8 0x5b8 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1e8 0x5b8 0x858 0x2 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1e8 0x5b8 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1e8 0x5b8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1ec 0x5bc 0x810 0x1 0x0
-#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1ec 0x5bc 0x83c 0x2 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1ec 0x5bc 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1ec 0x5bc 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1ec 0x5bc 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1f0 0x5c0 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1f0 0x5c0 0x82c 0x2 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1f0 0x5c0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1f0 0x5c0 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1f4 0x5c4 0x790 0x0 0x0
-#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1f4 0x5c4 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1f4 0x5c4 0x834 0x2 0x0
-#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1f4 0x5c4 0x8f0 0x3 0x1
-#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1f4 0x5c4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT        0x1f8 0x5c8 0x000 0x0 0x0
-#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1f8 0x5c8 0x818 0x1 0x0
-#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1f8 0x5c8 0x838 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1fc 0x5cc 0x8e4 0x0 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1fc 0x5cc 0x81c 0x1 0x0
-#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1fc 0x5cc 0x830 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x200 0x5d0 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x200 0x5d0 0x850 0x2 0x0
-#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x200 0x5d0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TX_EN__I2C4_SCL             0x200 0x5d0 0x880 0x9 0x0
-#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x204 0x5d4 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x204 0x5d4 0x854 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x204 0x5d4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x208 0x5d8 0x8dc 0x0 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x208 0x5d8 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x208 0x5d8 0x84c 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x208 0x5d8 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x208 0x5d8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD1__I2C4_SDA              0x208 0x5d8 0x884 0x9 0x0
-#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x20c 0x5dc 0x000 0x0 0x0
-#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x20c 0x5dc 0x8c0 0x2 0x1
-#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x20c 0x5dc 0x794 0x3 0x0
-#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x20c 0x5dc 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x20c 0x5dc 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x20c 0x5dc 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x20c 0x5dc 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x210 0x5e0 0x83c 0x0 0x1
-#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x210 0x5e0 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x210 0x5e0 0x8cc 0x2 0x1
-#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x210 0x5e0 0x790 0x3 0x1
-#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x210 0x5e0 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x210 0x5e0 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x210 0x5e0 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x214 0x5e4 0x850 0x0 0x1
-#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x214 0x5e4 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x214 0x5e4 0x80c 0x2 0x0
-#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x214 0x5e4 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x214 0x5e4 0x8f0 0x4 0x2
-#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x214 0x5e4 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x214 0x5e4 0x87c 0x6 0x1
-#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x214 0x5e4 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x218 0x5e8 0x844 0x0 0x0
-#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x218 0x5e8 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x218 0x5e8 0x7d4 0x2 0x1
-#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x218 0x5e8 0x8e8 0x3 0x1
-#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x218 0x5e8 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x218 0x5e8 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x21c 0x5ec 0x848 0x0 0x0
-#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x21c 0x5ec 0x814 0x1 0x0
-#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x21c 0x5ec 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x21c 0x5ec 0x8ec 0x3 0x1
-#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x21c 0x5ec 0x794 0x4 0x1
-#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x21c 0x5ec 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x21c 0x5ec 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x220 0x5f0 0x8c0 0x0 0x2
-#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x220 0x5f0 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x220 0x5f0 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x220 0x5f0 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x220 0x5f0 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x220 0x5f0 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x220 0x5f0 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x224 0x5f4 0x830 0x0 0x1
-#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x224 0x5f4 0x8d0 0x2 0x1
-#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x224 0x5f4 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x224 0x5f4 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x224 0x5f4 0x8e0 0x7 0x1
-#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x228 0x5f8 0x834 0x0 0x1
-#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x228 0x5f8 0x878 0x2 0x1
-#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x228 0x5f8 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x228 0x5f8 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x228 0x5f8 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x228 0x5f8 0x924 0x6 0x1
-#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x228 0x5f8 0x8dc 0x7 0x1
-#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x22c 0x5fc 0x838 0x0 0x1
-#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x22c 0x5fc 0x8c8 0x2 0x1
-#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x22c 0x5fc 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x22c 0x5fc 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x230 0x600 0x84c 0x0 0x1
-#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x230 0x600 0x8d4 0x2 0x1
-#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x230 0x600 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x230 0x600 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x230 0x600 0x878 0x6 0x2
-#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x230 0x600 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x234 0x604 0x840 0x0 0x1
-#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x234 0x604 0x03c 0x11 0xff000609
-#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x234 0x604 0x87c 0x2 0x2
-#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x234 0x604 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x234 0x604 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x234 0x604 0x8e4 0x7 0x1
-#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x238 0x608 0x854 0x0 0x1
-#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x238 0x608 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x238 0x608 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x238 0x608 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x238 0x608 0x904 0x4 0x2
-#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x238 0x608 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x238 0x608 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x238 0x608 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_7__I2C4_SCL                 0x238 0x608 0x880 0x8 0x1
-#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x23c 0x60c 0x858 0x0 0x1
-#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x23c 0x60c 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x23c 0x60c 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x23c 0x60c 0x7c8 0x3 0x0
-#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x23c 0x60c 0x904 0x4 0x3
-#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x23c 0x60c 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x23c 0x60c 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x23c 0x60c 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x23c 0x60c 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_8__I2C4_SDA                 0x23c 0x60c 0x884 0x8 0x1
-#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x240 0x610 0x82c 0x0 0x1
-#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x240 0x610 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x240 0x610 0x8c4 0x2 0x1
-#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x240 0x610 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x240 0x610 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x240 0x610 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x240 0x610 0x92c 0x6 0x1
-#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x244 0x62c 0x7d8 0x0 0x3
-#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x244 0x62c 0x824 0x1 0x0
-#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x244 0x62c 0x7c0 0x2 0x1
-#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x244 0x62c 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x244 0x62c 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x244 0x62c 0x914 0x4 0x2
-#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x244 0x62c 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x244 0x62c 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x248 0x630 0x7dc 0x0 0x3
-#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x248 0x630 0x810 0x1 0x1
-#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x248 0x630 0x7c4 0x2 0x1
-#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x248 0x630 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x248 0x630 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x248 0x630 0x91c 0x4 0x2
-#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x248 0x630 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x248 0x630 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x24c 0x634 0x7e8 0x0 0x2
-#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x24c 0x634 0x820 0x1 0x0
-#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x24c 0x634 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x24c 0x634 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x24c 0x634 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x24c 0x634 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x24c 0x634 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x250 0x638 0x7f0 0x0 0x1
-#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x250 0x638 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x250 0x638 0x860 0x2 0x1
-#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x250 0x638 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x250 0x638 0x870 0x4 0x1
-#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x250 0x638 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x250 0x638 0x8f0 0x6 0x3
-#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x254 0x63c 0x000 0x0 0x0
-#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x254 0x63c 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x254 0x63c 0x920 0x2 0x1
-#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x254 0x63c 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x254 0x63c 0x918 0x4 0x2
-#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x254 0x63c 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x254 0x63c 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x258 0x640 0x7e0 0x0 0x3
-#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x258 0x640 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x258 0x640 0x7b4 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x258 0x640 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x258 0x640 0x914 0x4 0x3
-#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x258 0x640 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x258 0x640 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x258 0x640 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x25c 0x644 0x7e4 0x0 0x3
-#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x25c 0x644 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x25c 0x644 0x7b0 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x25c 0x644 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x25c 0x644 0x91c 0x4 0x3
-#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x25c 0x644 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x25c 0x644 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x25c 0x644 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x260 0x648 0x7ec 0x0 0x1
-#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x260 0x648 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x260 0x648 0x7c8 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x260 0x648 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x260 0x648 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x260 0x648 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x260 0x648 0x85c 0x6 0x1
-#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x264 0x64c 0x794 0x1 0x2
-#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x264 0x64c 0x864 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x264 0x64c 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x264 0x64c 0x874 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x264 0x64c 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x264 0x64c 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x268 0x650 0x7cc 0x0 0x0
-#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x268 0x650 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x268 0x650 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x268 0x650 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x268 0x650 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x268 0x650 0x918 0x4 0x3
-#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x268 0x650 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x26c 0x654 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x26c 0x654 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x26c 0x654 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x270 0x658 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x270 0x658 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x274 0x65c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x274 0x65c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x278 0x660 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x278 0x660 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x278 0x660 0x000 0x2 0x0
-#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x278 0x660 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x27c 0x664 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x27c 0x664 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x27c 0x664 0x844 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x27c 0x664 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x27c 0x664 0x000 0x4 0x0
-#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x27c 0x664 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x280 0x668 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x280 0x668 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x280 0x668 0x848 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x280 0x668 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x280 0x668 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS3__I2C4_SDA              0x280 0x668 0x884 0x9 0x2
-#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x284 0x66c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x284 0x66c 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x284 0x66c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x288 0x670 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x288 0x670 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x288 0x670 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x28c 0x674 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x28c 0x674 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x28c 0x674 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x290 0x678 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x290 0x678 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x290 0x678 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x294 0x67c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x294 0x67c 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x294 0x67c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x298 0x680 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x298 0x680 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x298 0x680 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x29c 0x684 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x29c 0x684 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x29c 0x684 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x2a0 0x688 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x2a0 0x688 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x2a0 0x688 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2a4 0x68c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2a4 0x68c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2a8 0x690 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2a8 0x690 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_WP_B__I2C4_SCL             0x2a8 0x690 0x880 0x9 0x2
-#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x2ac 0x694 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x2ac 0x694 0x818 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x2ac 0x694 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x2b0 0x698 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x2b0 0x698 0x81c 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x2b0 0x698 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x2b4 0x69c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x2b4 0x69c 0x820 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x2b4 0x69c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x2b8 0x6a0 0x824 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x2bc 0x6a4 0x828 0x1 0x1
-#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x2c0 0x6a8 0x814 0x1 0x1
-#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x2c8 0x6b0 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x2d4 0x6bc 0x80c 0x7 0x1
-#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x2d8 0x6c0 0x8f4 0x2 0x1
-#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x2d8 0x6c0 0x000 0x7 0x0
-#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x2dc 0x6c4 0x928 0x0 0x1
-#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x2dc 0x6c4 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x2dc 0x6c4 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x2e0 0x6c8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x2e0 0x6c8 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x2e4 0x6cc 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x2e8 0x6d0 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x2ec 0x6d4 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x2f0 0x6d8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x2f0 0x6d8 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x2f4 0x6dc 0x930 0x0 0x1
-#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x2f4 0x6dc 0x8c0 0x2 0x3
-#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x2f4 0x6dc 0x7a4 0x3 0x1
-#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x2f8 0x6e0 0x8cc 0x2 0x2
-#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x2f8 0x6e0 0x7a0 0x3 0x1
-#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x2fc 0x6e4 0x798 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x2fc 0x6e4 0x8d4 0x4 0x2
-#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x2fc 0x6e4 0x000 0x6 0x0
-#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x300 0x6e8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x300 0x6e8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x300 0x6e8 0x7ac 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x300 0x6e8 0x8c8 0x4 0x2
-#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x300 0x6e8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x304 0x6ec 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x304 0x6ec 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x304 0x6ec 0x79c 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x304 0x6ec 0x8d0 0x4 0x2
-#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x304 0x6ec 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x308 0x6f0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x308 0x6f0 0x8c4 0x2 0x2
-#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x308 0x6f0 0x7a8 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x308 0x6f0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x30c 0x6f4 0x934 0x0 0x1
-#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x30c 0x6f4 0x900 0x1 0x2
-#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x30c 0x6f4 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x30c 0x6f4 0x7c8 0x2 0x2
-#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x30c 0x6f4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x310 0x6f8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x310 0x6f8 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x310 0x6f8 0x900 0x1 0x3
-#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x310 0x6f8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x310 0x6f8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x314 0x6fc 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x314 0x6fc 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x314 0x6fc 0x8f8 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x314 0x6fc 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x314 0x6fc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x318 0x700 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x318 0x700 0x8f8 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x318 0x700 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x318 0x700 0x7cc 0x2 0x1
-#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x318 0x700 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x31c 0x704 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x31c 0x704 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x320 0x708 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x320 0x708 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x320 0x708 0x908 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x320 0x708 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x324 0x70c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x324 0x70c 0x904 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x324 0x70c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x324 0x70c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x328 0x710 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x328 0x710 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x328 0x710 0x904 0x1 0x5
-#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x328 0x710 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x32c 0x714 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x32c 0x714 0x8fc 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x32c 0x714 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x32c 0x714 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x330 0x718 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x330 0x718 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x330 0x718 0x8fc 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x330 0x718 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x334 0x71c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x334 0x71c 0x908 0x1 0x5
-#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x334 0x71c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x334 0x71c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x338 0x720 0x938 0x0 0x1
-#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x338 0x720 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x338 0x720 0x90c 0x2 0x2
-#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x338 0x720 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x338 0x720 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x33c 0x724 0x000 0x0 0x0
-#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x33c 0x724 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x33c 0x724 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x33c 0x724 0x90c 0x2 0x3
-#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x33c 0x724 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x340 0x728 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x340 0x728 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x340 0x728 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x344 0x72c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x344 0x72c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x344 0x72c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x348 0x730 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x348 0x730 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x348 0x730 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x34c 0x734 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x34c 0x734 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x350 0x738 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x350 0x738 0x904 0x2 0x6
-#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x350 0x738 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x350 0x738 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x354 0x73c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x354 0x73c 0x900 0x2 0x4
-#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x354 0x73c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x354 0x73c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x358 0x740 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x358 0x740 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x358 0x740 0x900 0x2 0x5
-#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x358 0x740 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x35c 0x744 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x35c 0x744 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x35c 0x744 0x904 0x2 0x7
-#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x35c 0x744 0x000 0x5 0x0
-
-#endif /* __DTS_IMX6DL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts
deleted file mode 100644
index e98046eea7a41..0000000000000
--- a/arch/arm/boot/dts/imx6dl-plybas.dts
+++ /dev/null
@@ -1,396 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2014 Protonic Holland
- * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include "imx6dl.dtsi"
-
-/ {
-	model = "Plymovent BAS board";
-	compatible = "ply,plybas", "fsl,imx6dl";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		button-start {
-			label = "START";
-			linux,code = <31>;
-			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
-		};
-
-		button-clean {
-			label = "CLEAN";
-			linux,code = <46>;
-			gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-0 {
-			label = "debug0";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-1 {
-			label = "debug1";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-2 {
-			label = "light_tower1";
-			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-3 {
-			label = "light_tower2";
-			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-4 {
-			label = "light_tower3";
-			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-5 {
-			label = "light_tower4";
-			gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	clk50m_phy: phy-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-output-names = "enet_ref_pad";
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_5v0>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	xceiver-supply = <&reg_5v0>;
-	status = "okay";
-};
-
-&clks {
-	clocks = <&clk50m_phy>;
-	clock-names = "enet_ref_pad";
-	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
-	assigned-clock-parents = <&clk50m_phy>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-handle = <&rgmii_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ8081RNA PHY */
-		rgmii_phy: ethernet-phy@0 {
-			reg = <0>;
-			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "SD1_CD", "", "", "", "", "", "",
-		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "ECSPI1_SS1", "", "USB_EXT_PWR", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "CAN1_SR", "CAN2_SR", "", "",
-		"LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "IMX6_IN12", "IMX6_HMI",
-			"IMX6_IN11", "IMX6_BUZZER", "IMX6_LED1", "IMX6_LED2",
-		"IMX6_LED3", "IMX6_LED4", "ETH_RESET", "IMX6_ANA_OUT_SD",
-			"IMX6_ANA_OUT_ERR", "IMX6_ANA_OUT", "ETH_INTRP", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "IMX6_RELAY1", "IMX6_RELAY2", "",
-		"IMX6_IN1", "IMX6_IN2", "IMX6_IN3", "IMX6_IN4", "IMX6_IN5",
-			"IMX6_IN6", "IMX6_IN7", "IMX6_IN8",
-		"IMX6_IN9", "IMX6_IN10", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	/* additional i2c devices are added automatically by the boot loader */
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	temperature-sensor@70 {
-		compatible = "ti,tmp103";
-		reg = <0x70>;
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	linux,rs485-enabled-at-boot-time;
-	rs485-rts-delay = <0 20>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbphynop1 {
-	status = "disabled";
-};
-
-&usbphynop2 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
-			/* CAN1_SR */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
-			/* CAN2_SR */
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x1b000
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x3008
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x3008
-			/* CS */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x3008
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			/* MX6QDL_ENET_PINGRP4 */
-			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
-
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
-			/* Phy reset */
-			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
-			/* nINTRP */
-			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			/* DEBUG_0 */
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0
-			/* DEBUG_1 */
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09			0x1b0b0
-
-			/* LED1 (lighttower) */
-			MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22		0x13070
-			/* LED2 (lighttower) */
-			MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23		0x13070
-			/* LED3 (lighttower) */
-			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24		0x13070
-			/* LED4 (lighttower) */
-			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25		0x13070
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
-		>;
-	};
-
-	/* YaCO AUX Uart */
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B		0x130b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
-			/* power enable, high active */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
-			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
-			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
deleted file mode 100644
index e3c10483f33bd..0000000000000
--- a/arch/arm/boot/dts/imx6dl-plym2m.dts
+++ /dev/null
@@ -1,549 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2014 Protonic Holland
- * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include "imx6dl.dtsi"
-
-/ {
-	model = "Plymovent M2M board";
-	compatible = "ply,plym2m", "fsl,imx6dl";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000 0>;
-		brightness-levels = <0 1000>;
-		num-interpolated-steps = <20>;
-		default-brightness-level = <19>;
-		power-supply = <&reg_12v0>;
-	};
-
-	display {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-0 = <&pinctrl_ipu1_disp>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&vdiv_vaccu>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-0 {
-			label = "debug0";
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	panel {
-		compatible = "edt,etm0700g0bdh6";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	clk50m_phy: phy-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-output-names = "enet_ref_pad";
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_12v0: regulator-12v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "12v0";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	thermal-zones {
-		chassis-thermal {
-			polling-delay = <20000>;
-			polling-delay-passive = <0>;
-			thermal-sensors = <&tsens0>;
-		};
-
-		touch-thermal0 {
-			polling-delay = <20000>;
-			polling-delay-passive = <0>;
-			thermal-sensors = <&touch_temp0>;
-		};
-
-		touch-thermal1 {
-			polling-delay = <20000>;
-			polling-delay-passive = <0>;
-			thermal-sensors = <&touch_temp1>;
-		};
-	};
-
-	touchscreen {
-		compatible = "resistive-adc-touch";
-		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
-                              <&adc_ts 5>;
-		io-channel-names = "y", "z1", "z2", "x";
-		touchscreen-min-pressure = <64687>;
-		touchscreen-inverted-x;
-		touchscreen-inverted-y;
-		touchscreen-x-plate-ohms = <300>;
-		touchscreen-y-plate-ohms = <800>;
-	};
-
-	touch_temp0: touch-temperature-sensor0 {
-		compatible = "generic-adc-thermal";
-		#thermal-sensor-cells = <0>;
-		io-channels = <&adc_ts 0>;
-		io-channel-names = "sensor-channel";
-		temperature-lookup-table = <    (-40000) 736
-						85000 474>;
-	};
-
-	touch_temp1: touch-temperature-sensor1 {
-		compatible = "generic-adc-thermal";
-		#thermal-sensor-cells = <0>;
-		io-channels = <&adc_ts 7>;
-		io-channel-names = "sensor-channel";
-		temperature-lookup-table = <    (-40000) 826
-						85000 609>;
-	};
-
-	vdiv_vaccu: voltage-divider-vaccu {
-		compatible = "voltage-divider";
-		io-channels = <&adc_ts 2>;
-		output-ohms = <2500>;
-		full-ohms = <64000>;
-		#io-channel-cells = <0>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_5v0>;
-	status = "okay";
-};
-
-&clks {
-	clocks = <&clk50m_phy>;
-	clock-names = "enet_ref_pad";
-	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
-	assigned-clock-parents = <&clk50m_phy>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-
-	adc_ts: adc@0 {
-		compatible = "ti,tsc2046e-adc";
-		reg = <0>;
-		pinctrl-0 = <&pinctrl_tsc2046>;
-		pinctrl-names = "default";
-		spi-max-frequency = <1000000>;
-		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
-		#io-channel-cells = <1>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@0 {
-			reg = <0>;
-			settling-time-us = <300>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@1 {
-			reg = <1>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@2 {
-			reg = <2>;
-			settling-time-us = <300>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@3 {
-			reg = <3>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@4 {
-			reg = <4>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@5 {
-			reg = <5>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-
-		/* channel 6 is not connected */
-
-		channel@7 {
-			reg = <7>;
-			settling-time-us = <300>;
-			oversampling-ratio = <5>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-handle = <&rgmii_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ8081RNA PHY */
-		rgmii_phy: ethernet-phy@0 {
-			reg = <0>;
-			interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"CAN1_TERM", "SD1_CD", "", "", "", "", "", "",
-		"DEBUG_0", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "ECSPI2_SS0", "", "", "", "TSC_BUSY", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "ECSPI1_SS1", "TSC_PENIRQ", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "CAN1_SR", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "ETH_RESET", "ETH_INTRP",
-		"", "", "", "", "", "", "", "";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	/* additional i2c devices are added automatically by the boot loader */
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	tsens0: temperature-sensor@70 {
-		compatible = "ti,tmp103";
-		reg = <0x70>;
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display_in>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbphynop1 {
-	status = "disabled";
-};
-
-&usbphynop2 {
-	status = "disabled";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	disable-wp;
-	cap-sd-highspeed;
-	no-mmc;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	no-sd;
-	no-sdio;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
-			/* CAN1_SR */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
-			/* CAN1_TERM */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x1b000
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x3008
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x3008
-			/* CS */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x3008
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x10000
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0x3008
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0x3008
-			/* CS */
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x3008
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			/* MX6QDL_ENET_PINGRP4 */
-			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
-
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
-			/* Phy reset */
-			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22		0x1b0b0
-			/* nINTRP */
-			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23		0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_disp: ipudisp1grp {
-		fsl,pins = <
-			/* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x30
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x30
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x30
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x30
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x30
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x30
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x30
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x30
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x30
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x30
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x30
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x30
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x30
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x30
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x30
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x30
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x30
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x30
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x30
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x30
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x30
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x30
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT			0x8
-		>;
-	};
-
-	pinctrl_tsc2046: tsc2046grp {
-		fsl,pins = <
-			/* TSC_PENIRQ */
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x1b0b1
-			/* TSC_BUSY */
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
-			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
-			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts
deleted file mode 100644
index 5f4fa796ca18f..0000000000000
--- a/arch/arm/boot/dts/imx6dl-prtmvt.dts
+++ /dev/null
@@ -1,851 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2016 Protonic Holland
- * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include <dt-bindings/display/sdtv-standards.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/media/tvp5150.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-#include "imx6dl.dtsi"
-
-/ {
-	model = "Protonic MVT board";
-	compatible = "prt,prtmvt", "fsl,imx6dl";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm1 0 5000000 0>;
-		brightness-levels = <0 16 64 255>;
-		num-interpolated-steps = <16>;
-		default-brightness-level = <1>;
-		power-supply = <&reg_3v3>;
-		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
-	};
-
-	connector {
-		compatible = "composite-video-connector";
-		label = "Composite0";
-		sdtv-standards = <SDTV_STD_PAL_B>;
-
-		port {
-			comp0_out: endpoint {
-				remote-endpoint = <&tvp5150_comp0_in>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-		autorepeat;
-
-		key-power {
-			label = "Power Button";
-			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		key-f1 {
-			label = "GPIO Key F1";
-			linux,code = <KEY_F1>;
-			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f2 {
-			label = "GPIO Key F2";
-			linux,code = <KEY_F2>;
-			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f3 {
-			label = "GPIO Key F3";
-			linux,code = <KEY_F3>;
-			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f4 {
-			label = "GPIO Key F4";
-			linux,code = <KEY_F4>;
-			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f5 {
-			label = "GPIO Key F5";
-			linux,code = <KEY_F5>;
-			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
-		};
-
-		key-cycle {
-			label = "GPIO Key CYCLE";
-			linux,code = <KEY_CYCLEWINDOWS>;
-			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
-		};
-
-		key-esc {
-			label = "GPIO Key ESC";
-			linux,code = <KEY_ESC>;
-			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
-		};
-
-		key-up {
-			label = "GPIO Key UP";
-			linux,code = <KEY_UP>;
-			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
-		};
-
-		key-down {
-			label = "GPIO Key DOWN";
-			linux,code = <KEY_DOWN>;
-			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
-		};
-
-		key-ok {
-			label = "GPIO Key OK";
-			linux,code = <KEY_OK>;
-			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f6 {
-			label = "GPIO Key F6";
-			linux,code = <KEY_F6>;
-			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f7 {
-			label = "GPIO Key F7";
-			linux,code = <KEY_F7>;
-			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f8 {
-			label = "GPIO Key F8";
-			linux,code = <KEY_F8>;
-			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f9 {
-			label = "GPIO Key F9";
-			linux,code = <KEY_F9>;
-			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f10 {
-			label = "GPIO Key F10";
-			linux,code = <KEY_F10>;
-			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
-		};
-
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-0 {
-			label = "debug0";
-			function = LED_FUNCTION_HEARTBEAT;
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-1 {
-			label = "debug1";
-			function = LED_FUNCTION_DISK;
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "disk-activity";
-		};
-
-		led-2 {
-			label = "power_led";
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	panel {
-		compatible = "kyo,tcg070wvlq", "lg,lb070wv8";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	clk50m_phy: phy-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-output-names = "enet_ref_pad";
-	};
-
-	reg_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_h1_vbus: regulator-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "h1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_otg_vbus: regulator-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "otg-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "prti6q-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Line", "Line In Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "External Speaker";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"External Speaker", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-			system-clock-frequency = <0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			bitclock-master;
-			frame-master;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	mux-ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		0
-			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TFSDIR	0
-			IMX_AUDMUX_V2_PTCR_TCLKDIR	IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
-	};
-
-	mux-pins3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-			0				IMX_AUDMUX_V2_PDCR_TXRXEN
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&clks {
-	clocks = <&clk50m_phy>;
-	clock-names = "enet_ref_pad";
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-handle = <&rmii_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ8081RNA PHY */
-		rmii_phy: ethernet-phy@0 {
-			reg = <0>;
-			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <3000>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
-			"CAM2_MIRROR", "", "", "SMBALERT",
-		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
-		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
-			"SD1_DATA3", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
-			"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
-		"", "", "", "", "", "", "", "ON_SWITCH",
-		"POWER_LED", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
-			"CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ",
-		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
-			"YACO_RESET";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX",
-		"", "", "DIP1_FB", "", "", "", "", "",
-		"CPU_LIGHT_ON", "", "ETH_RESET", "", "BL_EN",
-			"BL_PWM", "ETH_INTRP", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
-			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0xa>;
-		#sound-dai-cells = <0>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_3v3>;
-		VDDIO-supply = <&reg_3v3>;
-		VDDD-supply = <&reg_1v8>;
-	};
-
-	video@5c {
-		compatible = "ti,tvp5150";
-		reg = <0x5c>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			tvp5150_comp0_in: endpoint {
-				remote-endpoint = <&comp0_out>;
-			};
-		};
-
-		/* Output port 2 is video output pad */
-		port@2 {
-			reg = <2>;
-			tvp5151_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-			};
-		};
-	};
-
-	gpio_pca: gpio@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pca9539>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	/* additional i2c devices are added automatically by the boot loader */
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	adc@49 {
-		compatible = "ti,ads1015";
-		reg = <0x49>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@4 {
-			reg = <4>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@5 {
-			reg = <5>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@6 {
-			reg = <6>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@7 {
-			reg = <7>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	temperature-sensor@70 {
-		compatible = "ti,tmp103";
-		reg = <0x70>;
-	};
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-	status = "okay";
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&ssi1 {
-	#sound-dai-cells = <0>;
-	fsl,mode = "ac97-slave";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_h1_vbus>;
-	pinctrl-names = "default";
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	disable-wp;
-	cap-sd-highspeed;
-	no-mmc;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	no-sd;
-	no-sdio;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
-		>;
-	};
-
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28		0x1b0b0
-		>;
-	};
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
-			/* CAN1_SR */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
-			/* CAN1_TERM */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
-			/* CAN2_SR */
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x100b1
-			/* CS */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x000b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			/* MX6QDL_ENET_PINGRP4 */
-			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
-			/* Phy reset */
-			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
-			/* nINTRP */
-			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpiokeys: gpiokeygrp {
-		fsl,pins = <
-			/* nON_SWITCH */
-			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			/* ITU656_nRESET */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02			0x1b0b0
-			/* CAM1_MIRROR */
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03			0x130b0
-			/* CAM2_MIRROR */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
-			/* CAM_nDETECT */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
-			/* ISB_IN1 */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
-			/* ISB_nIN2 */
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21			0x1b0b0
-			/* WARN_LIGHT */
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19			0x100b0
-			/* ON2_FB */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b0
-			/* YACO_nIRQ */
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x1b0b0
-			/* YACO_BOOT0 */
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0x130b0
-			/* YACO_nRESET */
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x1b0b0
-			/* FORCE_ON1 */
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
-			/* AUDIO_nRESET */
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21		0x1f0b0
-			/* ITU656_nPDN */
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
-
-			/* HW revision detect */
-			/* REV_ID0 */
-			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x1b0b0
-			/* REV_ID1 */
-			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09			0x1b0b0
-			/* REV_ID2 */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10			0x1b0b0
-			/* REV_ID3 */
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11			0x1b0b0
-			/* REV_ID4 */
-			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12			0x1b0b0
-
-			/* New in HW revision 1 */
-			/* ON1_FB */
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
-			/* DIP1_FB */
-			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			/* DEBUG0 */
-			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16		0x1b0b0
-			/* DEBUG1 */
-			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
-			/* POWER_LED */
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
-		>;
-	};
-
-	pinctrl_pca9539: pca9539 {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
-		>;
-	};
-
-	/* YaCO AUX Uart */
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
-		>;
-	};
-
-	/* YaCO Touchscreen UART */
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
-			/* power enable, high active */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
-			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
-			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts
deleted file mode 100644
index 56bb1ca56a2df..0000000000000
--- a/arch/arm/boot/dts/imx6dl-prtrvt.dts
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2014 Protonic Holland
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-prti6q.dtsi"
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Protonic RVT board";
-	compatible = "prt,prtrvt", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x10000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-debug0 {
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-
-	nfc@0 {
-		compatible = "ti,trf7970a";
-		reg = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_nfc>;
-		spi-max-frequency = <2000000>;
-		interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>;
-		ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
-				  <&gpio5 11 GPIO_ACTIVE_LOW>;
-		vin-supply = <&reg_3v3>;
-		autosuspend-delay = <30000>;
-		irq-status-read-quirk;
-		en2-rf-quirk;
-		status = "okay";
-	};
-};
-
-&i2c3 {
-	adc@49 {
-		compatible = "ti,ads1015";
-		reg = <0x49>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* nc */
-		channel@4 {
-			reg = <4>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		/* nc */
-		channel@5 {
-			reg = <5>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		/* can1_l */
-		channel@6 {
-			reg = <6>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		/* can1_h */
-		channel@7 {
-			reg = <7>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "disabled";
-};
-
-&vpu {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_can1phy: can1phy {
-		fsl,pins = <
-			/* CAN1_SR */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
-			/* CAN1_TERM */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			/* CS */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
-		>;
-	};
-
-	pinctrl_nfc: nfcgrp {
-		fsl,pins = <
-			/* NFC_ASK_OOK */
-			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x100b1
-			/* NFC_PWR_EN */
-			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x100b1
-			/* NFC_EN2 */
-			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x100b1
-			/* NFC_EN */
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
-			/* NFC_MOD */
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
-			/* NFC_IRQ */
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
deleted file mode 100644
index a1eb53851794a..0000000000000
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ /dev/null
@@ -1,590 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2016 Protonic Holland
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-prti6q.dtsi"
-#include <dt-bindings/display/sdtv-standards.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	model = "Protonic VT7";
-	compatible = "prt,prtvt7", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		brightness-levels = <0 20 81 248 1000>;
-		default-brightness-level = <20>;
-		num-interpolated-steps = <21>;
-		power-supply = <&reg_bl_12v0>;
-	};
-
-	display {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-0 = <&pinctrl_ipu1_disp>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&vdiv_vaccu>;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		key-esc {
-			label = "GPIO Key ESC";
-			linux,code = <KEY_ESC>;
-			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
-		};
-
-		key-up {
-			label = "GPIO Key UP";
-			linux,code = <KEY_UP>;
-			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
-		};
-
-		key-down {
-			label = "GPIO Key DOWN";
-			linux,code = <KEY_DOWN>;
-			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
-		};
-
-		key-enter {
-			label = "GPIO Key Enter";
-			linux,code = <KEY_ENTER>;
-			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
-		};
-
-		key-cycle {
-			label = "GPIO Key CYCLE";
-			linux,code = <KEY_CYCLEWINDOWS>;
-			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f1 {
-			label = "GPIO Key F1";
-			linux,code = <KEY_F1>;
-			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f2 {
-			label = "GPIO Key F2";
-			linux,code = <KEY_F2>;
-			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f3 {
-			label = "GPIO Key F3";
-			linux,code = <KEY_F3>;
-			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f4 {
-			label = "GPIO Key F4";
-			linux,code = <KEY_F4>;
-			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f5 {
-			label = "GPIO Key F5";
-			linux,code = <KEY_F5>;
-			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f6 {
-			label = "GPIO Key F6";
-			linux,code = <KEY_F6>;
-			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f7 {
-			label = "GPIO Key F7";
-			linux,code = <KEY_F7>;
-			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f8 {
-			label = "GPIO Key F8";
-			linux,code = <KEY_F8>;
-			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f9 {
-			label = "GPIO Key F9";
-			linux,code = <KEY_F9>;
-			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
-		};
-
-		key-f10 {
-			label = "GPIO Key F10";
-			linux,code = <KEY_F10>;
-			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-debug0 {
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	panel {
-		compatible = "innolux,g070y2-t02";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	connector {
-		compatible = "composite-video-connector";
-		label = "Composite0";
-		sdtv-standards = <SDTV_STD_PAL_B>;
-
-		port {
-			comp0_out: endpoint {
-				remote-endpoint = <&tvp5150_comp0_in>;
-			};
-		};
-	};
-
-	reg_bl_12v0: regulator-bl-12v0 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_bl_12v0>;
-		regulator-name = "bl-12v0";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "prti6q-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Line", "Line In Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "External Speaker";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"External Speaker", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-			system-clock-frequency = <0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-			bitclock-master;
-			frame-master;
-		};
-	};
-
-	thermal-zones {
-		chassis-thermal {
-			polling-delay = <20000>;
-			polling-delay-passive = <0>;
-			thermal-sensors = <&tsens0>;
-		};
-
-		touch-thermal0 {
-			polling-delay = <20000>;
-			polling-delay-passive = <0>;
-			thermal-sensors = <&touch_temp0>;
-		};
-
-		touch-thermal1 {
-			polling-delay = <20000>;
-			polling-delay-passive = <0>;
-			thermal-sensors = <&touch_temp1>;
-		};
-	};
-
-	touchscreen {
-		compatible = "resistive-adc-touch";
-		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
-                              <&adc_ts 5>;
-		io-channel-names = "y", "z1", "z2", "x";
-		touchscreen-min-pressure = <64687>;
-		touchscreen-inverted-x;
-		touchscreen-inverted-y;
-		touchscreen-x-plate-ohms = <300>;
-		touchscreen-y-plate-ohms = <800>;
-	};
-
-	touch_temp0: touch-temperature-sensor0 {
-		compatible = "generic-adc-thermal";
-		#thermal-sensor-cells = <0>;
-		io-channels = <&adc_ts 0>;
-		io-channel-names = "sensor-channel";
-		temperature-lookup-table = <    (-40000) 736
-						85000 474>;
-	};
-
-	touch_temp1: touch-temperature-sensor1 {
-		compatible = "generic-adc-thermal";
-		#thermal-sensor-cells = <0>;
-		io-channels = <&adc_ts 7>;
-		io-channel-names = "sensor-channel";
-		temperature-lookup-table = <    (-40000) 826
-						85000 609>;
-	};
-
-	vdiv_vaccu: voltage-divider-vaccu {
-		compatible = "voltage-divider";
-		io-channels = <&adc_ts 2>;
-		output-ohms = <2500>;
-		full-ohms = <64000>;
-		#io-channel-cells = <0>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	mux-ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		0
-			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TFSDIR	0
-			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
-	};
-
-	mux-pins3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-
-	adc_ts: adc@0 {
-		compatible = "ti,tsc2046e-adc";
-		reg = <0>;
-		pinctrl-0 = <&pinctrl_tsc>;
-		pinctrl-names = "default";
-		spi-max-frequency = <1000000>;
-		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
-		#io-channel-cells = <1>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@1 {
-			reg = <1>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@3 {
-			reg = <3>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@4 {
-			reg = <4>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@5 {
-			reg = <5>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-	};
-};
-
-&i2c1 {
-	sgtl5000: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0xa>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec>;
-		#sound-dai-cells = <0>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_3v3>;
-		VDDIO-supply = <&reg_3v3>;
-		VDDD-supply = <&reg_1v8>;
-	};
-
-	video@5c {
-		compatible = "ti,tvp5150";
-		reg = <0x5c>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			tvp5150_comp0_in: endpoint {
-				remote-endpoint = <&comp0_out>;
-			};
-		};
-
-		/* Output port 2 is video output pad */
-		port@2 {
-			reg = <2>;
-
-			tvp5151_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsens0: temperature-sensor@70 {
-		compatible = "ti,tmp103";
-		reg = <0x70>;
-		#thermal-sensor-cells = <0>;
-	};
-
-	gpio_pca: gpio@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-};
-
-&ipu1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-	status = "okay";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display_in>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-		>;
-	};
-
-	pinctrl_can1phy: can1phy {
-		fsl,pins = <
-			/* CAN1_SR */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x13070
-			/* CAN1_TERM */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-		>;
-	};
-
-	pinctrl_codec: codecgrp {
-		fsl,pins = <
-			/* AUDIO_nRESET */
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1f0b0
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19	0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
-			/* ITU656_nRESET */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			/* ITU656_nPDN */
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0
-		>;
-	};
-
-	pinctrl_ipu1_disp: ipudisp1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15	   0xb0
-
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0
-
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0
-
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b0
-		>;
-	};
-
-	pinctrl_reg_bl_12v0: 12blgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
-		>;
-	};
-
-	pinctrl_tsc: tscgrp {
-
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
deleted file mode 100644
index 150d69858255d..0000000000000
--- a/arch/arm/boot/dts/imx6dl-qmx6.dtsi
+++ /dev/null
@@ -1,612 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
-//
-// Device Tree Source for i.MX6DL based congatec QMX6
-// System on Module
-//
-// Copyright 2018-2021 General Electric Company
-// Copyright 2018-2021 Collabora
-// Copyright 2016 congatec AG
-
-#include "imx6dl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	memory@10000000 {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	reg_3p3v: 3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c2>;
-
-		i2c5: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c6: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-
-	audmux_ssi1 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSDIR |
-			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) |
-			IMX_AUDMUX_V2_PTCR_TCLKDIR |
-			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) |
-			IMX_AUDMUX_V2_PTCR_SYN)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6)
-		>;
-	};
-
-	audmux_aud6 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT6>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
-		>;
-	};
-};
-
-&clks {
-	clocks = <&rtc_sqw>;
-	clock-names = "ckil";
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1>;
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "sst,sst25vf032b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0000000 0x100000>;
-		};
-
-		partition@100000 {
-			label = "user";
-			reg = <0x0100000 0x2fc000>;
-		};
-
-		partition@3fc000 {
-			label = "reserved";
-			reg = <0x03fc000 0x4000>;
-			read-only;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	fsl,magic-packet;
-	phy-handle = <&phy0>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@6 {
-			reg = <6>;
-			qca,clk-out-frequency = <125000000>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	rtc: m41t62@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-
-		rtc_sqw: clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-};
-
-&i2c6 {
-	pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/*
-			 * keep VGEN3, VGEN4 and VGEN5 enabled in order to
-			 * maintain backward compatibility with hw-rev. A.0
-			 */
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			/* supply voltage for eMMC */
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&gpio1 20 0>;
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-};
-
-&reg_arm {
-	vin-supply = <&sw1a_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&sw1c_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1c_reg>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbh1 {
-	/* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-};
-
-&usdhc2 {
-	/* MicroSD card slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc3 {
-	/* eMMC module */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
-	bus-width = <8>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	qmx6mux: imx6qdl-qmx6 {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x110b0 /* Q7[67] HDA_SDO */
-				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x30b0 /* Q7[59] HDA_SYNC */
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x30b0 /* Q7[65] HDA_SDI */
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x30b0 /* Q7[63] HDA_BITCLK */
-			>;
-		};
-
-		/* PHY is on System on Module, Q7[3-15] have Ethernet lines */
-		pinctrl_enet: enet {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000 /* PCIE_WAKE_B */
-				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x80000000 /* I2C multiplexer */
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x80000000 /* SD4_CD# */
-				MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x80000000 /* SD4_WP */
-				MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x80000000 /* Camera MCLK */
-			>;
-		};
-
-		pinctrl_i2c1: i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1 /* Q7[66] I2C_CLK */
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1 /* Q7[68] I2C_DAT */
-			>;
-		};
-
-		pinctrl_i2c1_gpio: i2c1-gpio {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x1b0b0 /* Q7[66] I2C_CLK */
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b0 /* Q7[68] I2C_DAT */
-			>;
-		};
-
-		pinctrl_i2c2: i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */
-			>;
-		};
-
-		pinctrl_i2c2_gpio: i2c2-gpio {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */
-				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */
-			>;
-		};
-
-		pinctrl_i2c3: i2c3 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1 /* Q7[60] SMB_CLK */
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1 /* Q7[62] SMB_DAT */
-			>;
-		};
-
-		pinctrl_i2c3_gpio: i2c3-gpio {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x1b0b0 /* Q7[60] SMB_CLK */
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0 /* Q7[62] SMB_DAT */
-			>;
-		};
-
-		pinctrl_phy_reset: phy-reset {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0 /* RGMII Phy Reset */
-			>;
-		};
-
-		pinctrl_pwm4: pwm4 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */
-			>;
-		};
-
-		pinctrl_q7_backlight_enable: q7-backlight-enable {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0 /* Q7[112] LVDS_BLEN */
-			>;
-		};
-
-		pinctrl_q7_gpio0: q7-gpio0 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0 /* Q7[185] GPIO0 */
-			>;
-		};
-
-		pinctrl_q7_gpio1: q7-gpio1 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0 /* Q7[186] GPIO1 */
-			>;
-		};
-
-		pinctrl_q7_gpio2: q7-gpio2 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b0 /* Q7[187] GPIO2 */
-			>;
-		};
-
-		pinctrl_q7_gpio3: q7-gpio3 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b0 /* Q7[188] GPIO3 */
-			>;
-		};
-
-		pinctrl_q7_gpio4: q7-gpio4 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* Q7[189] GPIO4 */
-			>;
-		};
-
-		pinctrl_q7_gpio5: q7-gpio5 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* Q7[190] GPIO5 */
-			>;
-		};
-
-		pinctrl_q7_gpio6: q7-gpio6 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0 /* Q7[191] GPIO6 */
-			>;
-		};
-
-		pinctrl_q7_gpio7: q7-gpio7 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* Q7[192] GPIO7 */
-			>;
-		};
-
-		pinctrl_q7_hda_reset: q7-hda-reset {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0 /* Q7[61] HDA_RST_N */
-			>;
-		};
-
-		pinctrl_q7_lcd_power: lcd-power {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* Q7[111] LVDS_PPEN */
-			>;
-		};
-
-		pinctrl_q7_sdio_power: q7-sdio-power {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b0 /* Q7[47] SDIO_PWR# */
-			>;
-		};
-
-		pinctrl_q7_sleep_button: q7-sleep-button {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0 /* Q7[21] SLP_BTN# */
-			>;
-		};
-
-		pinctrl_q7_spi_cs1: spi-cs1 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b0 /* Q7[202] SPI_CS1# */
-			>;
-		};
-
-		/* SPI1 bus does not leave System on Module */
-		pinctrl_spi1: spi1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
-			>;
-		};
-
-		/* Debug connector on Q7 module */
-		pinctrl_uart2: uart2 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1 /* Q7[177] UART0_RX */
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1 /* Q7[171] UART0_TX */
-			>;
-		};
-
-		pinctrl_usbotg: usbotg {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059 /* Q7[92] USB_ID */
-			>;
-		};
-
-		/* µSD card slot on Q7 module */
-		pinctrl_usdhc2: usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0 /* SD2_CD */
-			>;
-		};
-
-		/* eMMC module on Q7 module */
-		pinctrl_usdhc3: usdhc3 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059 /* Q7[45] SDIO_CMD */
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x17059 /* Q7[42] SDIO_CLK */
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059 /* Q7[48] SDIO_DAT1 */
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059 /* Q7[49] SDIO_DAT0 */
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059 /* Q7[50] SDIO_DAT3 */
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059 /* Q7[51] SDIO_DAT2 */
-			>;
-		};
-
-		pinctrl_wdog: wdog {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0 /* Watchdog output signal */
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts
deleted file mode 100644
index b72f8ea1e6f6c..0000000000000
--- a/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2014 FEDEVEL, Inc.
- *
- * Author: Robert Nelson <robertcnelson@gmail.com>
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-rex.dtsi"
-
-/ {
-	model = "Rex Basic i.MX6 Dual Lite Board";
-	compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-};
-
-&ecspi3 {
-	flash: flash@0 {
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
deleted file mode 100644
index 24c7f535f63bd..0000000000000
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ /dev/null
@@ -1,597 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2014 Iain Paton <ipaton0@gmail.com>
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "RIoTboard i.MX6S";
-	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	chosen {
-		stdout-path = "serial1:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6-riotboard-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-			mux-int-port = <1>;
-			mux-ext-port = <3>;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usbotgvbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&clks {
-	fsl,pmic-stby-poweroff;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&rgmii_phy>;
-	/delete-property/ interrupts;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Atheros AR8035 PHY */
-		rgmii_phy: ethernet-phy@4 {
-			reg = <4>;
-			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <1000>;
-			qca,smarteee-tw-us-1g = <24>;
-			qca,clk-out-frequency = <125000000>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL",
-			"I2C3_SDA", "I2C4_SCL",
-		"I2C4_SDA", "", "", "", "", "", "", "",
-		"", "PWM3", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "USB_OTG_VBUS", "",
-		"UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
-		"UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
-		"GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
-			"CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
-		"CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
-			"CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06",
-			"GPIO5_07",
-		"GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
-			"CSPI2_CS0", "CSPI2_CLK", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio7 {
-	gpio-line-names =
-		"SD3_CD", "SD3_WP", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	pmic: pf0100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <16 8>;
-		fsl,pmic-stby-poweroff;
-
-		regulators {
-			reg_vddcore: sw1ab {				/* VDDARM_IN */
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-			};
-
-			reg_vddsoc: sw1c {				/* VDDSOC_IN */
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-			};
-
-			reg_gen_3v3: sw2 {				/* VDDHIGH_IN */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_1v5a: sw3a {				/* NVCC_DRAM, NVCC_RGMII */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_1v5b: sw3b {				/* NVCC_DRAM, NVCC_RGMII */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_vtt: sw4 {				/* MIPI conn */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_5v_600mA: swbst {				/* not used */
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			reg_snvs_3v: vsnvs {				/* VDD_SNVS_IN */
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {				/* VREF_DDR */
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vgen1_1v5: vgen1 {				/* not used */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			reg_vgen2_1v2_eth: vgen2 {			/* pcie ? */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			reg_vgen3_2v8: vgen3 {				/* not used */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-			reg_vgen4_1v8: vgen4 {				/* NVCC_SD3 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen5_2v5_sgtl: vgen5 {			/* Pwr LED & 5V0_delayed enable */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen6_3v3: vgen6 {				/* #V#_DELAYED enable, MIPI */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	clocks = <&clks 116>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	imx6-riotboard {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x000b1		/* CS0 */
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x000b1		/* CS1 */
-				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1		/* CS0 */
-				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1		/* CS0 */
-				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x000b1		/* CS1 */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_7__I2C4_SCL             0x4001b8b1
-				MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* user led0 */
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* user led1 */
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* SD2 CD */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* SD2 WP */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0	/* SD3 CD */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0	/* SD3 WP */
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x17059	/* SD4 RST (eMMC) */
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts
deleted file mode 100644
index ff3283c83a394..0000000000000
--- a/arch/arm/boot/dts/imx6dl-sabreauto.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2013 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sabreauto.dtsi"
-
-/ {
-	model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
-	compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
-};
-
-&cpu0 {
-	operating-points = <
-		/* kHz    uV */
-		996000  1275000
-		792000  1175000
-		396000  1150000
-	>;
-	fsl,soc-operating-points = <
-		/* ARM kHz  SOC-PU uV */
-		996000	1200000
-		792000	1175000
-		396000	1175000
-	>;
-};
diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts
deleted file mode 100644
index 33040761b253a..0000000000000
--- a/arch/arm/boot/dts/imx6dl-sabrelite.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-sabrelite.dtsi"
-
-/ {
-	model = "Freescale i.MX6 DualLite SABRE Lite Board";
-	compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl";
-};
-
-&ipu1_csi1_from_ipu1_csi1_mux {
-	clock-lanes = <0>;
-	data-lanes = <1 2>;
-};
diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts
deleted file mode 100644
index cd6bbf22a16f0..0000000000000
--- a/arch/arm/boot/dts/imx6dl-sabresd.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2013 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sabresd.dtsi"
-
-/ {
-	model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
-	compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
-};
-
-&ipu1_csi1_from_ipu1_csi1_mux {
-	clock-lanes = <0>;
-	data-lanes = <1 2>;
-};
diff --git a/arch/arm/boot/dts/imx6dl-savageboard.dts b/arch/arm/boot/dts/imx6dl-savageboard.dts
deleted file mode 100644
index b95469c520a47..0000000000000
--- a/arch/arm/boot/dts/imx6dl-savageboard.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-savageboard.dtsi"
-
-/ {
-	model = "Poslab SavageBoard Dual";
-	compatible = "poslab,imx6dl-savageboard", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
deleted file mode 100644
index b12b5aabe70a7..0000000000000
--- a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-skov-cpu.dtsi"
-#include "imx6qdl-skov-cpu-revc.dtsi"
-#include "imx6qdl-skov-revc-lt2.dtsi"
-
-/ {
-	model = "SKOV IMX6 CPU SoloCore";
-	compatible = "skov,imx6dl-skov-revc-lt2", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts b/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts
deleted file mode 100644
index 5dcc433fe2af5..0000000000000
--- a/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-skov-cpu.dtsi"
-#include "imx6qdl-skov-cpu-revc.dtsi"
-
-/ {
-	model = "SKOV IMX6 CPU SoloCore";
-	compatible = "skov,imx6dl-skov-revc-lt6", "fsl,imx6dl";
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
-		pwms = <&pwm2 0 20000 0>;
-		brightness-levels = <0 255>;
-		num-interpolated-steps = <17>;
-		default-brightness-level = <8>;
-		power-supply = <&reg_24v0>;
-	};
-
-	display {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			display0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	panel {
-		compatible = "logictechno,lttd800480070-l6wh-rt";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display0_out>;
-			};
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&iomuxc {
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
-		>;
-	};
-
-	pinctrl_ipu1: ipu1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-solidsense.dts b/arch/arm/boot/dts/imx6dl-solidsense.dts
deleted file mode 100644
index 2a3699adbed00..0000000000000
--- a/arch/arm/boot/dts/imx6dl-solidsense.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
- * Based on dt work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-emmc.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-hummingboard2.dtsi"
-#include "imx6qdl-solidsense.dtsi"
-
-/ {
-	model = "SolidRun SolidSense Solo/DualLite (1.5som+emmc)";
-	compatible = "solidrun,solidsense/dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tqma6a.dtsi b/arch/arm/boot/dts/imx6dl-tqma6a.dtsi
deleted file mode 100644
index e891ef9b00918..0000000000000
--- a/arch/arm/boot/dts/imx6dl-tqma6a.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-tqma6a.dtsi"
-#include "imx6qdl-tqma6.dtsi"
-
-/ {
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tqma6b.dtsi b/arch/arm/boot/dts/imx6dl-tqma6b.dtsi
deleted file mode 100644
index 38cd8501a886d..0000000000000
--- a/arch/arm/boot/dts/imx6dl-tqma6b.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-tqma6b.dtsi"
-#include "imx6qdl-tqma6.dtsi"
-
-/ {
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/imx6dl-ts4900.dts
deleted file mode 100644
index 3d60cc725d9e4..0000000000000
--- a/arch/arm/boot/dts/imx6dl-ts4900.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2015 Technologic Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-ts4900.dtsi"
-
-/ {
-	model = "Technologic Systems i.MX6 Solo/DualLite TS-4900 (Default Device Tree)";
-	compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-ts7970.dts b/arch/arm/boot/dts/imx6dl-ts7970.dts
deleted file mode 100644
index 5da6feba2e66a..0000000000000
--- a/arch/arm/boot/dts/imx6dl-ts7970.dts
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright 2015 Technologic Systems
- * Copyright 2017 Savoir-faire Linux
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-ts7970.dtsi"
-
-/ {
-	model = "Technologic Systems i.MX6 Solo/DualLite TS-7970 (Default Device Tree)";
-	compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
deleted file mode 100644
index 51a9bb9d6bc28..0000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
-
-&backlight {
-	pwms = <&pwm2 0 500000 0>;
-	/delete-property/ turn-on-delay-ms;
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcd_panel {
-	compatible = "edt,etm0700g0edh6";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
deleted file mode 100644
index fc23b4d291a1b..0000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6s-8034.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
deleted file mode 100644
index 9eb2ef17339c7..0000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8034 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	cpus {
-		/delete-node/ cpu@1;
-	};
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&pinctrl_usdhc1 {
-	fsl,pins = <
-		MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
-		MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
-		MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
-		MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
-		MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
-		MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
-		MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
-	>;
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
deleted file mode 100644
index 4101c6597721c..0000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6s-8035.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
deleted file mode 100644
index a5532ecc18c5a..0000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8035 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	cpus {
-		/delete-node/ cpu@1;
-	};
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
deleted file mode 100644
index 67ed0452f5de5..0000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-801x Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
deleted file mode 100644
index d34189fc52d97..0000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6u-8033.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
deleted file mode 100644
index 7030b2654bbd2..0000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8033 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
deleted file mode 100644
index aef5fcc42904f..0000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6u-801x.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
deleted file mode 100644
index 5342f2f5a8a85..0000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lvds.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-811x Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
deleted file mode 100644
index c4588fb0bf6fe..0000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6u-811x.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-udoo.dts b/arch/arm/boot/dts/imx6dl-udoo.dts
deleted file mode 100644
index d871cac1711f7..0000000000000
--- a/arch/arm/boot/dts/imx6dl-udoo.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-udoo.dtsi"
-
-/ {
-	model = "Udoo i.MX6 Dual-lite Board";
-	compatible = "udoo,imx6dl-udoo", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
deleted file mode 100644
index 23274be08e61f..0000000000000
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ /dev/null
@@ -1,336 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2016 Protonic Holland
- * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-vicut1.dtsi"
-
-/ {
-	model = "Kverneland TGO";
-	compatible = "kvg,victgo", "fsl,imx6dl";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-		autorepeat;
-
-		key-power {
-			label = "Power Button";
-			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		key-enter {
-			label = "Rotary Key";
-			gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_ENTER>;
-			wakeup-source;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>;
-	};
-
-	panel {
-		compatible = "lg,lb070wv8";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	clk50m_phy: phy-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-output-names = "enet_ref_pad";
-	};
-
-	rotary-encoder {
-		compatible = "rotary-encoder";
-		pinctrl-0 = <&pinctrl_rotary_ch>;
-		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>,
-			<&gpio2 4 GPIO_ACTIVE_HIGH>;
-		linux,axis = <REL_WHEEL>;
-		rotary-encoder,steps-per-period = <4>;
-		rotary-encoder,relative-axis;
-		rotary-encoder,rollover;
-		wakeup-source;
-	};
-
-	thermal-zones {
-		chassis-thermal {
-			polling-delay = <20000>;
-			polling-delay-passive = <0>;
-			thermal-sensors = <&tsens0>;
-		};
-
-		touch-thermal0 {
-			polling-delay = <20000>;
-			polling-delay-passive = <0>;
-			thermal-sensors = <&touch_temp0>;
-		};
-
-		touch-thermal1 {
-			polling-delay = <20000>;
-			polling-delay-passive = <0>;
-			thermal-sensors = <&touch_temp1>;
-		};
-	};
-
-	touchscreen {
-		compatible = "resistive-adc-touch";
-		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
-                              <&adc_ts 5>;
-		io-channel-names = "y", "z1", "z2", "x";
-		touchscreen-min-pressure = <64687>;
-		touchscreen-inverted-y;
-		touchscreen-x-plate-ohms = <300>;
-		touchscreen-y-plate-ohms = <800>;
-	};
-
-	touch_temp0: touch-temperature-sensor0 {
-		compatible = "generic-adc-thermal";
-		#thermal-sensor-cells = <0>;
-		io-channels = <&adc_ts 0>;
-		io-channel-names = "sensor-channel";
-		temperature-lookup-table = <    (-40000) 736
-						85000 474>;
-	};
-
-	touch_temp1: touch-temperature-sensor1 {
-		compatible = "generic-adc-thermal";
-		#thermal-sensor-cells = <0>;
-		io-channels = <&adc_ts 7>;
-		io-channel-names = "sensor-channel";
-		temperature-lookup-table = <    (-40000) 826
-						85000 609>;
-	};
-
-	vdiv_vaccu: voltage-divider-vaccu {
-		compatible = "voltage-divider";
-		io-channels = <&adc_ts 2>;
-		output-ohms = <2500>;
-		full-ohms = <64000>;
-		#io-channel-cells = <0>;
-	};
-
-	vdiv_hitch_pos: voltage-divider-hitch-pos {
-		compatible = "voltage-divider";
-		io-channels = <&adc_ts 6>;
-		output-ohms = <3300>;
-		full-ohms = <13300>;
-		#io-channel-cells = <0>;
-	};
-};
-
-&clks {
-	clocks = <&clk50m_phy>;
-	clock-names = "enet_ref_pad";
-	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
-	assigned-clock-parents = <&clk50m_phy>;
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-
-	adc_ts: adc@0 {
-		compatible = "ti,tsc2046e-adc";
-		reg = <0>;
-		pinctrl-0 = <&pinctrl_touchscreen>;
-		pinctrl-names = "default";
-		spi-max-frequency = <1000000>;
-		interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
-		#io-channel-cells = <1>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@1 {
-			reg = <1>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@3 {
-			reg = <3>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@4 {
-			reg = <4>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@5 {
-			reg = <5>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-handle = <&rmii_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ8081RNA PHY */
-		rmii_phy: ethernet-phy@0 {
-			reg = <0>;
-			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
-			"CAM2_MIRROR", "", "", "SMBALERT",
-		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
-		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
-			"SD1_DATA3", "ETH_MDIO", "",
-		"", "", "", "", "", "", "", "ETH_MDC";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
-		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
-			"CAN2_SR", "CAN2_TX", "CAN2_RX",
-		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
-			"HITCH_IN_OUT",
-		"LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN",
-			"BL_PWM", "ETH_INT", "ISB_LED";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",
-			"ECSPI2_SS0", "ECSPI2_SCLK", "", "",
-		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
-			"I2S_BITCLK", "I2S_DOUT",
-		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
-			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
-			"ITU656_D6", "ITU656_D7", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&i2c1 {
-	keypad@70 {
-		compatible = "holtek,ht16k33";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_keypad>;
-		reg = <0x70>;
-		refresh-rate-hz = <20>;
-		debounce-delay-ms = <50>;
-		interrupts-extended = <&gpio4 5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
-		keypad,num-rows = <12>;
-		keypad,num-columns = <3>;
-		linux,keymap = <
-			MATRIX_KEY(2, 0, KEY_F6)
-			MATRIX_KEY(3, 0, KEY_F8)
-			MATRIX_KEY(4, 0, KEY_F10)
-			MATRIX_KEY(5, 0, KEY_F4)
-			MATRIX_KEY(6, 0, KEY_F2)
-			MATRIX_KEY(2, 1, KEY_F5)
-			MATRIX_KEY(3, 1, KEY_F7)
-			MATRIX_KEY(4, 1, KEY_F9)
-			MATRIX_KEY(5, 1, KEY_F3)
-			MATRIX_KEY(6, 1, KEY_F1)
-		      >;
-	};
-};
-
-&iomuxc {
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI		0x100b1
-			MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO		0x100b1
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12		0x100b1
-			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK		0x100b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			/* MX6QDL_ENET_PINGRP4 */
-			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
-			/* Phy reset */
-			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
-			/* nINTRP */
-			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpiokeys: gpiokeygrp {
-		fsl,pins = <
-			/* ROTARY_BTN */
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05			0x1b0b0
-			/* nON_SWITCH */
-			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
-		>;
-	};
-
-	pinctrl_keypad: keypadgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
-		>;
-	};
-
-	pinctrl_rotary_ch: rotarychgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x1b0b0
-			MX6QDL_PAD_NANDF_D4__GPIO2_IO04			0x1b0b0
-		>;
-	};
-
-	pinctrl_touchscreen: touchscreengrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08		0x1b0b0
-			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/imx6dl-vicut1.dts
deleted file mode 100644
index 5035d303447d4..0000000000000
--- a/arch/arm/boot/dts/imx6dl-vicut1.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2014 Protonic Holland
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-vicut1.dtsi"
-#include "imx6qdl-vicut1-12inch.dtsi"
-
-/ {
-	model = "Kverneland UT1 Board";
-	compatible = "kvg,vicut1", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
deleted file mode 100644
index c2946fbaa0dd4..0000000000000
--- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-wandboard-revb1.dtsi"
-
-/ {
-	model = "Wandboard i.MX6 Dual Lite Board rev B1";
-	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
deleted file mode 100644
index 6d1d863c2e3a6..0000000000000
--- a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-wandboard-revd1.dtsi"
-
-/ {
-	model = "Wandboard i.MX6 Dual Lite Board revD1";
-	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts
deleted file mode 100644
index 4a08d5a994522..0000000000000
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-wandboard-revc1.dtsi"
-
-/ {
-	model = "Wandboard i.MX6 Dual Lite Board";
-	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
deleted file mode 100644
index 3be38a3c4bb11..0000000000000
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ /dev/null
@@ -1,648 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	aliases: aliases {
-		ethernet1 = &eth1;
-		ethernet2 = &eth2;
-		mmc0 = &usdhc3;
-		mmc1 = &usdhc4;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 32 64 128 255>;
-		default-brightness-level = <32>;
-		num-interpolated-steps = <8>;
-		power-supply = <&sw2_reg>;
-		status = "disabled";
-	};
-
-	lcd_display: display {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1>;
-		status = "disabled";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		compatible = "dataimage,scf0700c48ggu18";
-		power-supply = <&sw2_reg>;
-		backlight = <&backlight>;
-		status = "disabled";
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	reg_pcie: regulator-pcie {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_reg>;
-		regulator-name = "MPCIE_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		status = "disabled";
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1_vbus>;
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		status = "disabled";
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg_vbus>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-supply = <&sw2_reg>;
-	status = "okay";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
-		switch@10 {
-			compatible = "qca,qca8334";
-			reg = <10>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-
-			switch_ports: ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy0: port@0 {
-					reg = <0>;
-					label = "cpu";
-					phy-mode = "rgmii-id";
-					ethernet = <&fec>;
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				eth2: port@2 {
-					reg = <2>;
-					label = "eth2";
-					phy-handle = <&phy_port2>;
-				};
-
-				eth1: port@3 {
-					reg = <3>;
-					label = "eth1";
-					phy-handle = <&phy_port3>;
-				};
-			};
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_cec>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "disabled";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic@8 {
-		compatible = "fsl,pfuze200";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		reg = <0x8>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vsnvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	leds: led-controller@30 {
-		compatible = "ti,lp5562";
-		reg = <0x30>;
-		clock-mode = /bits/ 8 <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		led@0 {
-			chan-name = "R";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-			reg = <0>;
-			color = <LED_COLOR_ID_RED>;
-		};
-
-		led@1 {
-			chan-name = "G";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-			reg = <1>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
-
-		led@2 {
-			chan-name = "B";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-			reg = <2>;
-			color = <LED_COLOR_ID_BLUE>;
-		};
-	};
-
-	eeprom@57 {
-		compatible = "atmel,24c128";
-		reg = <0x57>;
-		pagesize = <64>;
-	};
-
-	touchscreen: touchscreen@5c {
-		compatible = "pixcir,pixcir_tangoc";
-		reg = <0x5c>;
-		pinctrl-0 = <&pinctrl_touch>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		status = "disabled";
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	oled_1309: oled@3c {
-		compatible = "solomon,ssd1309fb-i2c";
-		reg = <0x3c>;
-		solomon,height = <64>;
-		solomon,width = <128>;
-		solomon,page-offset = <0>;
-		solomon,segment-no-remap;
-		solomon,prechargep2 = <15>;
-		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
-		vbat-supply = <&sw2_reg>;
-		status = "disabled";
-	};
-
-	oled_1305: oled@3d {
-		compatible = "solomon,ssd1305fb-i2c";
-		reg = <0x3d>;
-		solomon,height = <64>;
-		solomon,width = <128>;
-		solomon,page-offset = <0>;
-		solomon,col-offset = <4>;
-		solomon,prechargep2 = <15>;
-		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
-		vbat-supply = <&sw2_reg>;
-		status = "disabled";
-	};
-
-	gpio_oled: gpio@41 {
-		compatible = "nxp,pca9536";
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0x41>;
-		vcc-supply = <&sw2_reg>;
-		status = "disabled";
-	};
-
-	touchkeys: keys@5a {
-		compatible = "fsl,mpr121-touchkey";
-		reg = <0x5a>;
-		vdd-supply = <&sw2_reg>;
-		autorepeat;
-		linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
-				<KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
-				<KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
-		poll-interval = <50>;
-		status = "disabled";
-	};
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b020
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b020
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b020
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b020
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b020
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b020
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b020
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b020
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b020
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b020
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b020
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b020
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b020
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b010
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b010
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b098
-		>;
-	};
-
-	pinctrl_hdmi_cec: hdmicecgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1b898
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b899
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b899
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b899
-			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b899
-		>;
-	};
-
-	pinctrl_ipu1: ipu1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b098
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b098
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b098
-		>;
-	};
-
-	pinctrl_pcie_reg: pciereggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b098
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b098
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x8
-		>;
-	};
-
-	pinctrl_touch: touchgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b098
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b098
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0a8
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0a8
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b098
-			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b098
-		>;
-	};
-
-	pinctrl_usbh1: usbh1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__USB_H1_OC	0x1b098
-		>;
-	};
-
-	pinctrl_usbh1_vbus: usbh1-vbus {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x98
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b098
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b098
-		>;
-	};
-
-	pinctrl_usbotg_vbus: usbotg-vbus {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x98
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22	0x1b018
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x1b018
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x1f069
-			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x10069
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17069
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17069
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17069
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17069
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17069
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17069
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17069
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17069
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b0
-		>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie>;
-	status = "disabled";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	over-current-active-low;
-	status = "disabled";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	vbus-supply = <&reg_usb_otg_vbus>;
-	over-current-active-low;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usbphy1 {
-	fsl,tx-d-cal = <106>;
-	status = "okay";
-};
-
-&usbphy2 {
-	fsl,tx-d-cal = <109>;
-	status = "disabled";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&sw2_reg>;
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	keep-power-in-suspend;
-	vmmc-supply = <&sw2_reg>;
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&wdog2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-draco.dts b/arch/arm/boot/dts/imx6dl-yapp4-draco.dts
deleted file mode 100644
index a38c407fd8370..0000000000000
--- a/arch/arm/boot/dts/imx6dl-yapp4-draco.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6dl-yapp4-common.dtsi"
-
-/ {
-	model = "Y Soft IOTA Draco i.MX6Solo board";
-	compatible = "ysoft,imx6dl-yapp4-draco", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-};
-
-&backlight {
-	status = "okay";
-};
-
-&lcd_display {
-	status = "okay";
-};
-
-&leds {
-	status = "okay";
-};
-
-&panel {
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&reg_usb_h1_vbus {
-	status = "okay";
-};
-
-&touchscreen {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy2 {
-	status = "okay";
-};
-
-&usdhc3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
deleted file mode 100644
index a19609c7c7c0e..0000000000000
--- a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6dl-yapp4-common.dtsi"
-
-/ {
-	model = "Y Soft IOTA Hydra i.MX6DualLite board";
-	compatible = "ysoft,imx6dl-yapp4-hydra", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-&gpio_oled {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&leds {
-	status = "okay";
-};
-
-&oled_1305 {
-	status = "okay";
-};
-
-&oled_1309 {
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&reg_pcie {
-	status = "okay";
-};
-
-&touchkeys {
-	status = "okay";
-};
-
-&usdhc3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts
deleted file mode 100644
index 5c2cd517589bf..0000000000000
--- a/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2021 Y Soft Corporation, a.s.
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6dl-yapp43-common.dtsi"
-
-/ {
-	model = "Y Soft IOTA Lynx i.MX6DualLite board";
-	compatible = "ysoft,imx6dl-yapp4-lynx", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-};
-
-&backlight {
-	status = "okay";
-};
-
-&lcd_display {
-	status = "okay";
-};
-
-&leds {
-	status = "okay";
-};
-
-&panel {
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&reg_usb_h1_vbus {
-	status = "okay";
-};
-
-&touchscreen {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
deleted file mode 100644
index 884b236746bb0..0000000000000
--- a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2020 Y Soft Corporation, a.s.
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6dl-yapp4-common.dtsi"
-
-/ {
-	model = "Y Soft IOTA Orion i.MX6DualLite board";
-	compatible = "ysoft,imx6dl-yapp4-orion", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0xf0000000>;
-	};
-};
-
-&gpio_oled {
-	status = "okay";
-};
-
-&leds {
-	status = "okay";
-};
-
-&oled_1305 {
-	status = "okay";
-};
-
-&oled_1309 {
-	status = "okay";
-};
-
-&reg_usb_h1_vbus {
-	status = "okay";
-};
-
-&touchkeys {
-	status = "okay";
-};
-
-&uart2 {
-	status = "disabled";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts
deleted file mode 100644
index e0292f11d03ec..0000000000000
--- a/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2021 Y Soft Corporation, a.s.
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6dl-yapp43-common.dtsi"
-
-/ {
-	model = "Y Soft IOTA Phoenix i.MX6DualLite board";
-	compatible = "ysoft,imx6dl-yapp4-phoenix", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-};
-
-&aliases {
-	/delete-property/ ethernet1;
-};
-
-&gpio_keys {
-	status = "okay";
-};
-
-&reg_usb_h1_vbus {
-	status = "okay";
-};
-
-&switch_ports {
-	/delete-node/ port@2;
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
deleted file mode 100644
index f6ae24efd4aa2..0000000000000
--- a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6dl-yapp4-common.dtsi"
-
-/ {
-	model = "Y Soft IOTA Ursa i.MX6Solo board";
-	compatible = "ysoft,imx6dl-yapp4-ursa", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-};
-
-&aliases {
-	/delete-property/ ethernet1;
-};
-
-&backlight {
-	status = "okay";
-};
-
-&lcd_display {
-	status = "okay";
-};
-
-&panel {
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&reg_usb_h1_vbus {
-	status = "okay";
-};
-
-&switch_ports {
-	/delete-node/ port@3;
-};
-
-&touchscreen {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi
deleted file mode 100644
index 52a0f6ee426f9..0000000000000
--- a/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi
+++ /dev/null
@@ -1,615 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2021 Y Soft Corporation, a.s.
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	aliases: aliases {
-		ethernet1 = &eth1;
-		ethernet2 = &eth2;
-		mmc0 = &usdhc3;
-		mmc1 = &usdhc4;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 32 64 128 255>;
-		default-brightness-level = <32>;
-		num-interpolated-steps = <8>;
-		power-supply = <&sw2_reg>;
-		status = "disabled";
-	};
-
-	gpio_keys: gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-		status = "disabled";
-
-		button {
-			label = "Factory RESET";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	lcd_display: display {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1>;
-		status = "disabled";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		compatible = "dataimage,scf0700c48ggu18";
-		power-supply = <&sw2_reg>;
-		backlight = <&backlight>;
-		enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1_vbus>;
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		status = "disabled";
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg_vbus>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-supply = <&sw2_reg>;
-	status = "okay";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@0 {
-			compatible = "marvell,mv88e6085";
-			reg = <0>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-
-			switch_ports: ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy0: port@0 {
-					reg = <0>;
-					label = "cpu";
-					phy-mode = "rgmii-id";
-					ethernet = <&fec>;
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				eth2: port@1 {
-					reg = <1>;
-					label = "eth2";
-					phy-handle = <&phy_port1>;
-				};
-
-				eth1: port@2 {
-					reg = <2>;
-					label = "eth1";
-					phy-handle = <&phy_port2>;
-				};
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy_port1: switchphy@11 {
-					reg = <0x11>;
-				};
-
-				phy_port2: switchphy@12 {
-					reg = <0x12>;
-				};
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic@8 {
-		compatible = "fsl,pfuze200";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		reg = <0x8>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vsnvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	leds: led-controller@30 {
-		compatible = "ti,lp5562";
-		reg = <0x30>;
-		clock-mode = /bits/ 8 <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		led@0 {
-			chan-name = "R";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-			reg = <0>;
-			color = <LED_COLOR_ID_RED>;
-		};
-
-		led@1 {
-			chan-name = "G";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-			reg = <1>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
-
-		led@2 {
-			chan-name = "B";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-			reg = <2>;
-			color = <LED_COLOR_ID_BLUE>;
-		};
-	};
-
-	eeprom@57 {
-		compatible = "atmel,24c128";
-		reg = <0x57>;
-		pagesize = <64>;
-	};
-
-	touchscreen: touchscreen@5c {
-		compatible = "pixcir,pixcir_tangoc";
-		reg = <0x5c>;
-		pinctrl-0 = <&pinctrl_touch>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		status = "disabled";
-	};
-
-	rtc: rtc@68 {
-		compatible = "dallas,ds1341";
-		reg = <0x68>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "disabled";
-
-	oled_1309: oled@3c {
-		compatible = "solomon,ssd1309fb-i2c";
-		reg = <0x3c>;
-		solomon,height = <64>;
-		solomon,width = <128>;
-		solomon,page-offset = <0>;
-		solomon,segment-no-remap;
-		solomon,prechargep2 = <15>;
-		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
-		vbat-supply = <&sw2_reg>;
-		status = "disabled";
-	};
-
-	oled_1305: oled@3d {
-		compatible = "solomon,ssd1305fb-i2c";
-		reg = <0x3d>;
-		solomon,height = <64>;
-		solomon,width = <128>;
-		solomon,page-offset = <0>;
-		solomon,col-offset = <4>;
-		solomon,prechargep2 = <15>;
-		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
-		vbat-supply = <&sw2_reg>;
-		status = "disabled";
-	};
-
-	gpio_oled: gpio@41 {
-		compatible = "nxp,pca9536";
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0x41>;
-		vcc-supply = <&sw2_reg>;
-		status = "disabled";
-	};
-
-	touchkeys: keys@5a {
-		compatible = "fsl,mpr121-touchkey";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchkeys>;
-		reg = <0x5a>;
-		vdd-supply = <&sw2_reg>;
-		autorepeat;
-		linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
-				<KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
-				<KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
-		poll-interval = <50>;
-		status = "disabled";
-	};
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b020
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b020
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b020
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b020
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b020
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b020
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b020
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b020
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b020
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b020
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b020
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b020
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b020
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b010
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b010
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b098
-		>;
-	};
-
-	pinctrl_gpio_keys: gpiokeysgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b899
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b899
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b899
-			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b899
-		>;
-	};
-
-	pinctrl_ipu1: ipu1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA7__GPIO3_IO07                  0x1b0b0
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b098
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x8
-		>;
-	};
-
-	pinctrl_touch: touchgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b098
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b098
-		>;
-	};
-
-	pinctrl_touchkeys: touchkeysgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b098
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b098
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0a8
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0a8
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b098
-			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b098
-		>;
-	};
-
-	pinctrl_usbh1: usbh1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__USB_H1_OC	0x1b098
-		>;
-	};
-
-	pinctrl_usbh1_vbus: usbh1-vbus {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x98
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b098
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b098
-		>;
-	};
-
-	pinctrl_usbotg_vbus: usbotg-vbus {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x98
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x1f069
-			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x10069
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17069
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17069
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17069
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17069
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17069
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17069
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17069
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17069
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b0
-		>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "disabled";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	over-current-active-low;
-	status = "disabled";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	vbus-supply = <&reg_usb_otg_vbus>;
-	over-current-active-low;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usbphy1 {
-	fsl,tx-d-cal = <106>;
-	status = "okay";
-};
-
-&usbphy2 {
-	fsl,tx-d-cal = <109>;
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	keep-power-in-suspend;
-	vmmc-supply = <&sw2_reg>;
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&wdog2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
deleted file mode 100644
index dc919e09a505f..0000000000000
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ /dev/null
@@ -1,397 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6dl-pinfunc.h"
-#include "imx6qdl.dtsi"
-
-/ {
-	aliases {
-		i2c3 = &i2c4;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			operating-points = <
-				/* kHz    uV */
-				996000  1250000
-				792000  1175000
-				396000  1150000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz  SOC-PU uV */
-				996000	1175000
-				792000	1175000
-				396000	1175000
-			>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			#cooling-cells = <2>;
-			clocks = <&clks IMX6QDL_CLK_ARM>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-				 <&clks IMX6QDL_CLK_STEP>,
-				 <&clks IMX6QDL_CLK_PLL1_SW>,
-				 <&clks IMX6QDL_CLK_PLL1_SYS>;
-			clock-names = "arm", "pll2_pfd2_396m", "step",
-				      "pll1_sw", "pll1_sys";
-			arm-supply = <&reg_arm>;
-			pu-supply = <&reg_pu>;
-			soc-supply = <&reg_soc>;
-			nvmem-cells = <&cpu_speed_grade>;
-			nvmem-cell-names = "speed_grade";
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			operating-points = <
-				/* kHz    uV */
-				996000  1250000
-				792000  1175000
-				396000  1150000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz  SOC-PU uV */
-				996000	1175000
-				792000	1175000
-				396000	1175000
-			>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			#cooling-cells = <2>;
-			clocks = <&clks IMX6QDL_CLK_ARM>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-				 <&clks IMX6QDL_CLK_STEP>,
-				 <&clks IMX6QDL_CLK_PLL1_SW>,
-				 <&clks IMX6QDL_CLK_PLL1_SYS>;
-			clock-names = "arm", "pll2_pfd2_396m", "step",
-				      "pll1_sw", "pll1_sys";
-			arm-supply = <&reg_arm>;
-			pu-supply = <&reg_pu>;
-			soc-supply = <&reg_soc>;
-		};
-	};
-
-	soc: soc {
-		ocram: sram@900000 {
-			compatible = "mmio-sram";
-			reg = <0x00900000 0x20000>;
-			ranges = <0 0x00900000 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&clks IMX6QDL_CLK_OCRAM>;
-		};
-
-		aips1: bus@2000000 {
-			pxp: pxp@20f0000 {
-				reg = <0x020f0000 0x4000>;
-				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			epdc: epdc@20f4000 {
-				reg = <0x020f4000 0x4000>;
-				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		aips2: bus@2100000 {
-			i2c4: i2c@21f8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
-				reg = <0x021f8000 0x4000>;
-				interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6DL_CLK_I2C4>;
-				status = "disabled";
-			};
-		};
-	};
-
-	capture-subsystem {
-		compatible = "fsl,imx-capture-subsystem";
-		ports = <&ipu1_csi0>, <&ipu1_csi1>;
-	};
-
-	display-subsystem {
-		compatible = "fsl,imx-display-subsystem";
-		ports = <&ipu1_di0>, <&ipu1_di1>;
-	};
-};
-
-&gpio1 {
-	gpio-ranges = <&iomuxc  0 131 2>, <&iomuxc  2 137 8>, <&iomuxc 10 189 2>,
-		      <&iomuxc 12 194 1>, <&iomuxc 13 193 1>, <&iomuxc 14 192 1>,
-		      <&iomuxc 15 191 1>, <&iomuxc 16 185 2>, <&iomuxc 18 184 1>,
-		      <&iomuxc 19 187 1>, <&iomuxc 20 183 1>, <&iomuxc 21 188 1>,
-		      <&iomuxc 22 123 3>, <&iomuxc 25 121 1>, <&iomuxc 26 127 1>,
-		      <&iomuxc 27 126 1>, <&iomuxc 28 128 1>, <&iomuxc 29 130 1>,
-		      <&iomuxc 30 129 1>, <&iomuxc 31 122 1>;
-};
-
-&gpio2 {
-	gpio-ranges = <&iomuxc  0 161 8>, <&iomuxc  8 208 8>, <&iomuxc 16  74 1>,
-		      <&iomuxc 17  73 1>, <&iomuxc 18  72 1>, <&iomuxc 19  71 1>,
-		      <&iomuxc 20  70 1>, <&iomuxc 21  69 1>, <&iomuxc 22  68 1>,
-		      <&iomuxc 23  79 2>, <&iomuxc 25 118 2>, <&iomuxc 27 117 1>,
-		      <&iomuxc 28 113 4>;
-};
-
-&gpio3 {
-	gpio-ranges = <&iomuxc  0 97  2>, <&iomuxc 2 105 8>, <&iomuxc 10 99 6>,
-		      <&iomuxc 16 81 16>;
-};
-
-&gpio4 {
-	gpio-ranges = <&iomuxc  5 136 1>, <&iomuxc  6 145 1>, <&iomuxc  7 150 1>,
-		      <&iomuxc  8 146 1>, <&iomuxc  9 151 1>, <&iomuxc 10 147 1>,
-		      <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
-		      <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16  39 7>,
-		      <&iomuxc 23  56 1>, <&iomuxc 24  61 7>, <&iomuxc 31  46 1>;
-};
-
-&gpio5 {
-	gpio-ranges = <&iomuxc  0 120 1>, <&iomuxc  2 77 1>, <&iomuxc  4 76 1>,
-		      <&iomuxc  5  47 9>, <&iomuxc 14 57 4>, <&iomuxc 18 37 1>,
-		      <&iomuxc 19  36 1>, <&iomuxc 20 35 1>, <&iomuxc 21 38 1>,
-		      <&iomuxc 22  29 6>, <&iomuxc 28 19 4>;
-};
-
-&gpio6 {
-	gpio-ranges = <&iomuxc  0  23 6>, <&iomuxc  6  75 1>, <&iomuxc  7 156 1>,
-		      <&iomuxc  8 155 1>, <&iomuxc  9 170 1>, <&iomuxc 10 169 1>,
-		      <&iomuxc 11 157 1>, <&iomuxc 14 158 3>, <&iomuxc 17 204 1>,
-		      <&iomuxc 18 203 1>, <&iomuxc 19 182 1>, <&iomuxc 20 177 4>,
-		      <&iomuxc 24 175 1>, <&iomuxc 25 171 1>, <&iomuxc 26 181 1>,
-		      <&iomuxc 27 172 3>, <&iomuxc 30 176 1>, <&iomuxc 31  78 1>;
-};
-
-&gpio7 {
-	gpio-ranges = <&iomuxc 0 202 1>, <&iomuxc  1 201 1>, <&iomuxc  2 196 1>,
-		      <&iomuxc 3 195 1>, <&iomuxc  4 197 4>, <&iomuxc  8 205 1>,
-		      <&iomuxc 9 207 1>, <&iomuxc 10 206 1>, <&iomuxc 11 133 3>;
-};
-
-&gpr {
-	ipu1_csi0_mux {
-		compatible = "video-mux";
-		mux-controls = <&mux 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			ipu1_csi0_mux_from_mipi_vc0: endpoint {
-				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			ipu1_csi0_mux_from_mipi_vc1: endpoint {
-				remote-endpoint = <&mipi_vc1_to_ipu1_csi0_mux>;
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			ipu1_csi0_mux_from_mipi_vc2: endpoint {
-				remote-endpoint = <&mipi_vc2_to_ipu1_csi0_mux>;
-			};
-		};
-
-		port@3 {
-			reg = <3>;
-
-			ipu1_csi0_mux_from_mipi_vc3: endpoint {
-				remote-endpoint = <&mipi_vc3_to_ipu1_csi0_mux>;
-			};
-		};
-
-		port@4 {
-			reg = <4>;
-
-			ipu1_csi0_mux_from_parallel_sensor: endpoint {
-			};
-		};
-
-		port@5 {
-			reg = <5>;
-
-			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
-				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
-			};
-		};
-	};
-
-	ipu1_csi1_mux {
-		compatible = "video-mux";
-		mux-controls = <&mux 1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			ipu1_csi1_mux_from_mipi_vc0: endpoint {
-				remote-endpoint = <&mipi_vc0_to_ipu1_csi1_mux>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			ipu1_csi1_mux_from_mipi_vc1: endpoint {
-				remote-endpoint = <&mipi_vc1_to_ipu1_csi1_mux>;
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			ipu1_csi1_mux_from_mipi_vc2: endpoint {
-				remote-endpoint = <&mipi_vc2_to_ipu1_csi1_mux>;
-			};
-		};
-
-		port@3 {
-			reg = <3>;
-
-			ipu1_csi1_mux_from_mipi_vc3: endpoint {
-				remote-endpoint = <&mipi_vc3_to_ipu1_csi1_mux>;
-			};
-		};
-
-		port@4 {
-			reg = <4>;
-
-			ipu1_csi1_mux_from_parallel_sensor: endpoint {
-			};
-		};
-
-		port@5 {
-			reg = <5>;
-
-			ipu1_csi1_mux_to_ipu1_csi1: endpoint {
-				remote-endpoint = <&ipu1_csi1_from_ipu1_csi1_mux>;
-			};
-		};
-	};
-};
-
-&gpt {
-	compatible = "fsl,imx6dl-gpt";
-};
-
-&hdmi {
-	compatible = "fsl,imx6dl-hdmi";
-};
-
-&iomuxc {
-	compatible = "fsl,imx6dl-iomuxc";
-};
-
-&ipu1_csi1 {
-	ipu1_csi1_from_ipu1_csi1_mux: endpoint {
-		remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>;
-	};
-};
-
-&ldb {
-	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
-	clock-names = "di0_pll", "di1_pll",
-		      "di0_sel", "di1_sel",
-		      "di0", "di1";
-};
-
-&mipi_csi {
-	port@1 {
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mipi_vc0_to_ipu1_csi0_mux: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
-		};
-
-		mipi_vc0_to_ipu1_csi1_mux: endpoint@1 {
-			reg = <1>;
-			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>;
-		};
-	};
-
-	port@2 {
-		reg = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mipi_vc1_to_ipu1_csi0_mux: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>;
-		};
-
-		mipi_vc1_to_ipu1_csi1_mux: endpoint@1 {
-			reg = <1>;
-			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>;
-		};
-	};
-
-	port@3 {
-		reg = <3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mipi_vc2_to_ipu1_csi0_mux: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>;
-		};
-
-		mipi_vc2_to_ipu1_csi1_mux: endpoint@1 {
-			reg = <1>;
-			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>;
-		};
-	};
-
-	port@4 {
-		reg = <4>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mipi_vc3_to_ipu1_csi0_mux: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>;
-		};
-
-		mipi_vc3_to_ipu1_csi1_mux: endpoint@1 {
-			reg = <1>;
-			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>;
-		};
-	};
-};
-
-&mux {
-	mux-reg-masks = <0x34 0x00000007>, /* IPU_CSI0_MUX */
-			<0x34 0x00000038>, /* IPU_CSI1_MUX */
-			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
-			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
-			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
-			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
-			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
-};
-
-&vpu {
-	compatible = "fsl,imx6dl-vpu", "cnm,coda960";
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
deleted file mode 100644
index 3fc079dfd61ee..0000000000000
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2014-2022 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board";
-	compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q",
-		     "fsl,imx6q";
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reg_pcie_switch: regulator-pcie-switch {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		regulator-max-microvolt = <1800000>;
-		regulator-min-microvolt = <1800000>;
-		regulator-name = "pcie_switch";
-		startup-delay-us = <100000>;
-		status = "okay";
-	};
-
-	reg_3v3_sw: regulator-3v3-sw {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "3.3V_SW";
-	};
-};
-
-&can1 {
-	xceiver-supply = <&reg_3v3_sw>;
-	status = "okay";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3_sw>;
-	status = "okay";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	status = "okay";
-
-	pcie-switch@58 {
-		compatible = "plx,pex8605";
-		reg = <0x58>;
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	vpcie-supply = <&reg_pcie_switch>;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sound_spdif {
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
-/* MMC1 */
-&usdhc1 {
-	status = "okay";
-};
-
-/* SD1 */
-&usdhc2 {
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
deleted file mode 100644
index 44637d606e612..0000000000000
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2014-2022 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-#include "imx6q-apalis-ixora-v1.2.dts"
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
-	compatible = "toradex,apalis_imx6q-ixora-v1.1", "toradex,apalis_imx6q",
-		     "fsl,imx6q";
-
-
-};
-
-/delete-node/ &eeprom;
-/delete-node/ &reg_3v3_vmmc;
-/delete-node/ &reg_can1_supply;
-/delete-node/ &reg_can2_supply;
-
-&can1 {
-	/delete-property/ xceiver-supply;
-};
-
-&can2 {
-	/delete-property/ xceiver-supply;
-};
-
-/* MMC1 */
-&usdhc1 {
-	/delete-property/ cap-power-off-card;
-	/delete-property/ pinctrl-1;
-	/delete-property/ vmmc-supply;
-	pinctrl-names = "default";
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts
deleted file mode 100644
index 717decda0cebd..0000000000000
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2014-2022 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.2";
-	compatible = "toradex,apalis_imx6q-ixora-v1.2", "toradex,apalis_imx6q",
-		     "fsl,imx6q";
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds_ixora>;
-
-		led4-green {
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-			label = "LED_4_GREEN";
-		};
-
-		led4-red {
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-			label = "LED_4_RED";
-		};
-
-		led5-green {
-			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-			label = "LED_5_GREEN";
-		};
-
-		led5-red {
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-			label = "LED_5_RED";
-		};
-	};
-
-	reg_3v3_vmmc: regulator-3v3-vmmc {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "3v3_vmmc";
-		startup-delay-us = <100>;
-	};
-
-	reg_can1_supply: regulator-can1-supply {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_enable_can1_power>;
-		regulator-name = "can1_supply";
-	};
-
-	reg_can2_supply: regulator-can2-supply {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_enable_can2_power>;
-		regulator-name = "can2_supply";
-	};
-};
-
-&can1 {
-	xceiver-supply = <&reg_can1_supply>;
-	status = "okay";
-};
-
-&can2 {
-	xceiver-supply = <&reg_can2_supply>;
-	status = "okay";
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart24_forceoff>;
-
-	/*
-	 * uart-2-4-on-x21-enable-hog enables the UART transceiver for Apalis
-	 * UART2 and UART3. If one wants to disable the transceiver force
-	 * the GPIO to output-low, if one wants to control the transceiver
-	 * from user space delete the hog node.
-	 */
-	uart-2-4-on-x21-enable-hog {
-		gpio-hog;
-		gpios = <11 GPIO_ACTIVE_HIGH>; /* MXM3 180 */
-		output-high;
-	};
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	status = "okay";
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sound_spdif {
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
-/* MMC1 */
-&usdhc1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
-	pinctrl-1 = <&pinctrl_usdhc1_4bit_sleep &pinctrl_mmc_cd_sleep>;
-	bus-width = <4>;
-	cap-power-off-card;
-	vmmc-supply = <&reg_3v3_vmmc>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
-		>;
-	};
-
-	pinctrl_enable_can1_power: enablecan1powergrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
-		>;
-	};
-
-	pinctrl_enable_can2_power: enablecan2powergrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart24_forceoff: uart24forceoffgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0
-		>;
-	};
-
-	pinctrl_leds_ixora: ledsixoragrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
-			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
-		>;
-	};
-
-	pinctrl_mmc_cd_sleep: mmccdslpgrp {
-		fsl,pins = <
-			 /* MMC1 CD */
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0
-		>;
-	};
-
-	pinctrl_usdhc1_4bit_sleep: usdhc1-4bitslpgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD     0x3000
-			MX6QDL_PAD_SD1_CLK__SD1_CLK     0x3000
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0  0x3000
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1  0x3000
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2  0x3000
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3  0x3000
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
deleted file mode 100644
index f338be4352779..0000000000000
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2014-2022 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board";
-	compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
-		     "fsl,imx6q";
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds_ixora>;
-
-		led4-green {
-			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-			label = "LED_4_GREEN";
-		};
-
-		led4-red {
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			label = "LED_4_RED";
-		};
-
-		led5-green {
-			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-			label = "LED_5_GREEN";
-		};
-
-		led5-red {
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-			label = "LED_5_RED";
-		};
-	};
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sound_spdif {
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
-/* SD1 */
-&usdhc2 {
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_leds_ixora: ledsixoragrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
-			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts
deleted file mode 100644
index 664b0af8f0bbd..0000000000000
--- a/arch/arm/boot/dts/imx6q-apf6dev.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2015 Armadeus Systems <support@armadeus.com>
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-apf6.dtsi"
-#include "imx6qdl-apf6dev.dtsi"
-
-/ {
-	model = "Armadeus APF6 Quad / Dual Module on APF6Dev Board";
-	compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
deleted file mode 100644
index 75586299d9cab..0000000000000
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ /dev/null
@@ -1,226 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Armadillo2 Board";
-	compatible = "fsl,imx6q-arm2", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		debug-led {
-			label = "Heartbeat";
-			gpios = <&gpio3 25 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "disabled"; /* gpmi nand conflicts with SD */
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-arm2 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
-				MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_cdwp: usdhc3cdwp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
-				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	/delete-property/ interrupts;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3
-		     &pinctrl_usdhc3_cdwp>;
-	status = "okay";
-};
-
-&usdhc4 {
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
deleted file mode 100644
index d994b32ad825c..0000000000000
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Copyright 2015 Timesys Corporation.
- * Copyright 2015 General Electric Company
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q-bx50v3.dtsi"
-
-/ {
-	model = "General Electric B450v3";
-	compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	panel-lvds0 {
-		compatible = "innolux,g121x1-l03";
-		backlight = <&backlight_lvds>;
-		power-supply = <&reg_lvds>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-};
-
-&pca9539 {
-	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
-			  "", "SM_D_ACT", "DP1_RST#", "",
-			  "WD15S_EN", "WD15S_DIS#", "", "",
-			  "", "", "", "";
-
-	P04-hog {
-		gpio-hog;
-		gpios = <4 0>;
-		output-low;
-		line-name = "PCA9539-P04";
-	};
-
-	P07-hog {
-		gpio-hog;
-		gpios = <7 0>;
-		output-low;
-		line-name = "PCA9539-P07";
-	};
-};
-
-&pci_root {
-	/* Intel Corporation I210 Gigabit Network Connection */
-	switch_nic: ethernet@3,0 {
-		compatible = "pci8086,1533";
-		reg = <0x00010000 0 0 0 0>;
-	};
-};
-
-&switch_ports {
-	port@0 {
-		reg = <0>;
-		label = "enacq";
-		phy-handle = <&switchphy0>;
-	};
-
-	port@1 {
-		reg = <1>;
-		label = "eneport1";
-		phy-handle = <&switchphy1>;
-	};
-
-	port@2 {
-		reg = <2>;
-		label = "enix";
-		phy-handle = <&switchphy2>;
-	};
-
-	port@3 {
-		reg = <3>;
-		label = "enid";
-		phy-handle = <&switchphy3>;
-	};
-
-	port@4 {
-		reg = <4>;
-		label = "cpu";
-		ethernet = <&switch_nic>;
-		phy-handle = <&switchphy4>;
-	};
-
-	port@5 {
-		reg = <5>;
-		label = "enembc";
-
-		/* connected to Ethernet MAC of AT91RM9200 in MII mode */
-		fixed-link {
-			speed = <100>;
-			full-duplex;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
deleted file mode 100644
index fa1a1df37cde1..0000000000000
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright 2015 Timesys Corporation.
- * Copyright 2015 General Electric Company
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q-bx50v3.dtsi"
-
-/ {
-	model = "General Electric B650v3";
-	compatible = "ge,imx6q-b650v3", "advantech,imx6q-ba16", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	panel-lvds0 {
-		compatible = "innolux,g121x1-l03";
-		backlight = <&backlight_lvds>;
-		power-supply = <&reg_lvds>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-};
-
-&pca9539 {
-	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
-			  "", "SM_D_ACT", "DP1_RST#", "",
-			  "WD15S_EN", "WD15S_DIS#", "", "",
-			  "", "", "", "";
-
-	P07-hog {
-		gpio-hog;
-		gpios = <7 0>;
-		output-low;
-		line-name = "PCA9539-P07";
-	};
-};
-
-&usbphy1 {
-	fsl,tx-cal-45-dn-ohms = <55>;
-	fsl,tx-cal-45-dp-ohms = <55>;
-	fsl,tx-d-cal = <100>;
-};
-
-&pci_root {
-	/* Intel Corporation I210 Gigabit Network Connection */
-	switch_nic: ethernet@3,0 {
-		compatible = "pci8086,1533";
-		reg = <0x00010000 0 0 0 0>;
-	};
-};
-
-&switch_ports {
-	port@0 {
-		reg = <0>;
-		label = "enacq";
-		phy-handle = <&switchphy0>;
-	};
-
-	port@1 {
-		reg = <1>;
-		label = "eneport1";
-		phy-handle = <&switchphy1>;
-	};
-
-	port@2 {
-		reg = <2>;
-		label = "enix";
-		phy-handle = <&switchphy2>;
-	};
-
-	port@3 {
-		reg = <3>;
-		label = "enid";
-		phy-handle = <&switchphy3>;
-	};
-
-	port@4 {
-		reg = <4>;
-		label = "cpu";
-		ethernet = <&switch_nic>;
-		phy-handle = <&switchphy4>;
-	};
-
-	port@5 {
-		reg = <5>;
-		label = "enembc";
-
-		/* connected to Ethernet MAC of AT91RM9200 in MII mode */
-		fixed-link {
-			speed = <100>;
-			full-duplex;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
deleted file mode 100644
index db8c332df6a1d..0000000000000
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Copyright 2015 Timesys Corporation.
- * Copyright 2015 General Electric Company
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q-bx50v3.dtsi"
-
-/ {
-	model = "General Electric B850v3";
-	compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart3;
-	};
-};
-
-&ldb {
-	fsl,dual-channel;
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&stdp4028_in>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pca9547_ddc: mux@70 {
-		compatible = "nxp,pca9547";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mux2_i2c1: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-		};
-
-		mux2_i2c2: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1>;
-		};
-
-		mux2_i2c3: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-		};
-
-		mux2_i2c4: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3>;
-		};
-
-		mux2_i2c5: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4>;
-		};
-
-		mux2_i2c6: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x5>;
-		};
-
-		mux2_i2c7: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x6>;
-		};
-
-		mux2_i2c8: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x7>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&mux2_i2c1>;
-};
-
-&mux1_i2c1 {
-	ads7830@4a {
-		compatible = "ti,ads7830";
-		reg = <0x4a>;
-	};
-};
-
-&mux2_i2c2 {
-	clock-frequency = <100000>;
-
-	stdp2690@72 {
-		compatible = "megachips,stdp2690-ge-b850v3-fw";
-		reg = <0x72>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				stdp2690_in: endpoint {
-					remote-endpoint = <&stdp4028_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				stdp2690_out: endpoint {
-					/* Connector for external display */
-				};
-			};
-		};
-	};
-
-	stdp4028@73 {
-		compatible = "megachips,stdp4028-ge-b850v3-fw";
-		reg = <0x73>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				stdp4028_in: endpoint {
-					remote-endpoint = <&lvds0_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				stdp4028_out: endpoint {
-					remote-endpoint = <&stdp2690_in>;
-				};
-			};
-		};
-	};
-};
-
-&pca9539 {
-	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
-			  "REMOTE_ON_PML#", "SM_D_ACT", "DP1_RST#", "DP2_RST#",
-			  "", "", "", "",
-			  "", "", "", "";
-
-	P10-hog {
-		gpio-hog;
-		gpios = <8 0>;
-		output-low;
-		line-name = "PCA9539-P10";
-	};
-
-	P11-hog {
-		gpio-hog;
-		gpios = <9 0>;
-		output-low;
-		line-name = "PCA9539-P11";
-	};
-};
-
-&pci_root {
-	/* PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch */
-	bridge@1,0 {
-		compatible = "pci10b5,8605";
-		reg = <0x00010000 0 0 0 0>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-
-		bridge@2,1 {
-			compatible = "pci10b5,8605";
-			reg = <0x00020800 0 0 0 0>;
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-
-			/* Intel Corporation I210 Gigabit Network Connection */
-			ethernet@3,0 {
-				compatible = "pci8086,1533";
-				reg = <0x00030000 0 0 0 0>;
-			};
-		};
-
-		bridge@2,2 {
-			compatible = "pci10b5,8605";
-			reg = <0x00021000 0 0 0 0>;
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-
-			/* Intel Corporation I210 Gigabit Network Connection */
-			switch_nic: ethernet@4,0 {
-				compatible = "pci8086,1533";
-				reg = <0x00040000 0 0 0 0>;
-			};
-		};
-	};
-};
-
-&switch_ports {
-	port@0 {
-		reg = <0>;
-		label = "eneport1";
-		phy-handle = <&switchphy0>;
-	};
-
-	port@1 {
-		reg = <1>;
-		label = "eneport2";
-		phy-handle = <&switchphy1>;
-	};
-
-	port@2 {
-		reg = <2>;
-		label = "enix";
-		phy-handle = <&switchphy2>;
-	};
-
-	port@3 {
-		reg = <3>;
-		label = "enid";
-		phy-handle = <&switchphy3>;
-	};
-
-	port@4 {
-		reg = <4>;
-		label = "cpu";
-		ethernet = <&switch_nic>;
-		phy-handle = <&switchphy4>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
deleted file mode 100644
index f266f1b7e0cfc..0000000000000
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ /dev/null
@@ -1,661 +0,0 @@
-/*
- * Support for imx6 based Advantech DMS-BA16 Qseven module
- *
- * Copyright 2015 Timesys Corporation.
- * Copyright 2015 General Electric Company
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx6q.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	backlight_lvds: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_display>;
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
-				      10  11  12  13  14  15  16  17  18  19
-				      20  21  22  23  24  25  26  27  28  29
-				      30  31  32  33  34  35  36  37  38  39
-				      40  41  42  43  44  45  46  47  48  49
-				      50  51  52  53  54  55  56  57  58  59
-				      60  61  62  63  64  65  66  67  68  69
-				      70  71  72  73  74  75  76  77  78  79
-				      80  81  82  83  84  85  86  87  88  89
-				      90  91  92  93  94  95  96  97  98  99
-				     100 101 102 103 104 105 106 107 108 109
-				     110 111 112 113 114 115 116 117 118 119
-				     120 121 122 123 124 125 126 127 128 129
-				     130 131 132 133 134 135 136 137 138 139
-				     140 141 142 143 144 145 146 147 148 149
-				     150 151 152 153 154 155 156 157 158 159
-				     160 161 162 163 164 165 166 167 168 169
-				     170 171 172 173 174 175 176 177 178 179
-				     180 181 182 183 184 185 186 187 188 189
-				     190 191 192 193 194 195 196 197 198 199
-				     200 201 202 203 204 205 206 207 208 209
-				     210 211 212 213 214 215 216 217 218 219
-				     220 221 222 223 224 225 226 227 228 229
-				     230 231 232 233 234 235 236 237 238 239
-				     240 241 242 243 244 245 246 247 248 249
-				     250 251 252 253 254 255>;
-		default-brightness-level = <255>;
-		enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_lvds: regulator-lvds {
-		compatible = "regulator-fixed";
-		regulator-name = "lvds_ppen";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_h1_vbus: regulator-usbh1vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usbotgvbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-0 = <&pinctrl_usbotg_vbus>;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0xc0000>;
-		};
-
-		partition@c0000 {
-			label = "env";
-			reg = <0xc0000 0x10000>;
-		};
-
-		partition@d0000 {
-			label = "spare";
-			reg = <0xd0000 0x320000>;
-		};
-
-		partition@3f0000 {
-			label = "mfg";
-			reg = <0x3f0000 0x10000>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-supply = <&reg_3p3v>;
-	phy-handle = <&phy0>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@4 {
-			reg = <4>;
-			qca,clk-out-frequency = <125000000>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	pmic@58 {
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
-
-		onkey {
-			compatible = "dlg,da9063-onkey";
-		};
-
-		regulators {
-			vdd_bcore1: bcore1 {
-				regulator-min-microvolt = <1420000>;
-				regulator-max-microvolt = <1420000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vdd_bcore2: bcore2 {
-				regulator-min-microvolt = <1420000>;
-				regulator-max-microvolt = <1420000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vdd_bpro: bpro {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vdd_bmem: bmem {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vdd_bio: bio {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vdd_bperi: bperi {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vdd_ldo1: ldo1 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1860000>;
-			};
-
-			vdd_ldo2: ldo2 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1860000>;
-			};
-
-			vdd_ldo3: ldo3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3440000>;
-			};
-
-			vdd_ldo4: ldo4 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3440000>;
-			};
-
-			vdd_ldo5: ldo5 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-			};
-
-			vdd_ldo6: ldo6 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-			};
-
-			vdd_ldo7: ldo7 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-			};
-
-			vdd_ldo8: ldo8 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-			};
-
-			vdd_ldo9: ldo9 {
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <3600000>;
-			};
-
-			vdd_ldo10: ldo10 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-			};
-
-			vdd_ldo11: ldo11 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8010";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
-		reg = <0x32>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	fsl,tx-swing-full = <103>;
-	fsl,tx-swing-low = <103>;
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbhub>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
-	bus-width = <8>;
-	vmmc-supply = <&vdd_bperi>;
-	non-removable;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
-			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x130b0
-			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
-			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
-		>;
-	};
-
-	pinctrl_display: dispgrp {
-		fsl,pins = <
-			/* BLEN_OUT */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00    0x1b0b0
-			/* LVDS_PPEN_OUT */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
-			/* SPI1 CS */
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi5: ecspi5grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x1b0b0
-			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x1b0b0
-			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x1b0b0
-			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b0
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x100b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x10030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x10030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x10030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x10030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x10030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
-			/* FEC Reset */
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x1b0b0
-			/* AR8033 Interrupt */
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05        0x1b0b0
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			/* GPIO 0-7 */
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00  0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01  0x1b0b0
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02  0x1b0b0
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03  0x1b0b0
-			MX6QDL_PAD_NANDF_D4__GPIO2_IO04  0x1b0b0
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05  0x1b0b0
-			MX6QDL_PAD_NANDF_D6__GPIO2_IO06  0x1b0b0
-			MX6QDL_PAD_NANDF_D7__GPIO2_IO07  0x1b0b0
-			/* SUS_S3_OUT to CPLD */
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			/* PCIe Reset */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
-			/* PCIe Wake */
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			/* PMIC Interrupt */
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_rtc: rtcgrp {
-		fsl,pins = <
-			/* RTC_INT */
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b1
-			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbhub: usbhubgrp {
-		fsl,pins = <
-			/* HUB_RESET */
-			MX6QDL_PAD_GPIO_16__GPIO7_IO11	0x1b0b0
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-		>;
-	};
-
-	pinctrl_usbotg_vbus: usbotgvbusgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK	0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0	0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1	0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2	0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3	0x17059
-			/* uSDHC2 CD */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_reset: usdhc3grp-reset {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_RST__SD3_RESET   0x170F9
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x17059
-			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x17059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17059
-			/* uSDHC4 CD */
-			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
-			/* uSDHC4 SDIO PWR */
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
-			/* uSDHC4 SDIO WP */
-			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
-			/* uSDHC4 SDIO LED */
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__WDOG1_B	0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-bosch-acc.dts b/arch/arm/boot/dts/imx6q-bosch-acc.dts
deleted file mode 100644
index 8263bfef9bf85..0000000000000
--- a/arch/arm/boot/dts/imx6q-bosch-acc.dts
+++ /dev/null
@@ -1,779 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Support for the i.MX6-based Bosch ACC board.
- *
- * Copyright (C) 2016 Garz & Fricke GmbH
- * Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de>
- * Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie <lusus@denx.de>
- * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com>
- * Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Bosch ACC";
-	compatible = "bosch,imx6q-acc", "fsl,imx6q";
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		mmc0 = &usdhc4;
-		mmc1 = &usdhc2;
-		serial0 = &uart2;
-		serial1 = &uart1;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 200000>;
-		brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
-		num-interpolated-steps = <10>;
-		default-brightness-level = <60>;
-		power-supply = <&reg_lcd>;
-	};
-
-	panel {
-		compatible = "dataimage,fg1001l0dsswmg01";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	refclk: refclk {
-		compatible = "fixed-factor-clock";
-		#clock-cells = <0>;
-		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-div = <1>;
-		clock-mult = <1>;
-		clock-output-names = "12mhz_refclk";
-		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
-				  <&clks IMX6QDL_CLK_CKO2>,
-				  <&clks IMX6QDL_CLK_CKO2_SEL>;
-		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>,
-					 <&clks IMX6QDL_CLK_CKO2_PODF>,
-					 <&clks IMX6QDL_CLK_OSC>;
-		assigned-clock-rates = <0>, <12000000>, <0>;
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			operating-points = <
-				/* kHz    uV */
-				1200000 1275000
-				996000  1225000
-				852000  1225000
-				792000  1150000
-				396000  950000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz  SOC-PU uV */
-				1200000 1225000
-				996000	1175000
-				852000	1175000
-				792000	1150000
-				396000	1150000
-			>;
-		};
-
-		cpu1: cpu@1 {
-			operating-points = <
-				/* kHz    uV */
-				1200000 1275000
-				996000  1225000
-				852000  1225000
-				792000  1150000
-				396000  950000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz  SOC-PU uV */
-				1200000 1225000
-				996000	1175000
-				852000	1175000
-				792000	1150000
-				396000	1150000
-			>;
-		};
-	};
-
-	pwm-leds {
-		compatible = "pwm-leds";
-
-		led_red: led-0 {
-			color = <LED_COLOR_ID_RED>;
-			max-brightness = <248>;
-			default-state = "off";
-			pwms = <&pwm2 0 500000>;
-		};
-
-		led_white: led-1 {
-			color = <LED_COLOR_ID_WHITE>;
-			max-brightness = <248>;
-			default-state = "off";
-			pwms = <&pwm3 0 500000>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reset_gpio_led>;
-
-		led-2 {
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	reg_5p0: regulator-5p0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5p0";
-	};
-
-	reg_vin: regulator-vin {
-		compatible = "regulator-fixed";
-		regulator-name = "VIN";
-		regulator-min-microvolt = <4500000>;
-		regulator-max-microvolt = <4500000>;
-		regulator-always-on;
-		vin-supply = <&reg_5p0>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&reg_5p0>;
-	};
-
-	reg_usb_h2_vbus: regulator-usb-h2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_5p0> ;
-		regulator-always-on;
-	};
-
-	reg_vsnvs: regulator-vsnvs {
-		compatible = "regulator-fixed";
-		regulator-name = "VSNVS_3V0";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		regulator-always-on;
-		vin-supply = <&reg_5p0>;
-	};
-
-	reg_lcd: regulator-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD0 POWER";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd_enable>;
-		gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	reg_dac: regulator-dac {
-		compatible = "regulator-fixed";
-		regulator-name = "vref_dac";
-		regulator-min-microvolt = <20000>;
-		regulator-max-microvolt = <20000>;
-		vin-supply = <&reg_5p0> ;
-		regulator-boot-on;
-	};
-
-	reg_sw4: regulator-sw4 {
-		compatible = "regulator-fixed";
-		regulator-name = "SW4_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&reg_5p0>;
-	};
-
-	reg_sys: regulator-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "SYS_4V2";
-		regulator-min-microvolt = <4200000>;
-		regulator-max-microvolt = <4200000>;
-		regulator-always-on;
-		vin-supply = <&reg_5p0>;
-	};
-};
-
-&reg_arm {
-	vin-supply = <&sw2_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1c_reg>;
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&reg_vsnvs>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&reg_vsnvs>;
-};
-
-&reg_vdd3p0 {
-	vin-supply = <&reg_vsnvs>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		<&clks IMX6QDL_CLK_ENET>,
-		<&clks IMX6QDL_CLK_ENET>,
-		<&clks IMX6QDL_CLK_ENET_REF>;
-	clock-names = "ipg", "ahb", "ptp", "enet_out";
-	phy-mode = "rmii";
-	phy-supply = <&reg_sw4>;
-	phy-handle = <&ethphy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
-			smsc,disable-energy-detect;
-		};
-	};
-};
-
-&gpu_vg {
-	status = "disabled";
-};
-
-&gpu_2d {
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	pmic: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1c_reg: sw1c {
-				regulator-name = "VDD_SOC (sw1abc)";
-				regulator-min-microvolt = <1275000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-name = "VDD_ARM (sw2)";
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				compatible = "regulator-fixed";
-				regulator-name = "DDR_1V5a";
-				regulator-boot-on;
-				regulator-always-on;
-
-			};
-
-			sw3b_reg: sw3b {
-				compatible = "regulator-fixed";
-				regulator-name = "DDR_1V5b";
-				regulator-boot-on;
-				regulator-always-on;
-
-			};
-
-			sw4_reg: sw4 {
-				regulator-name = "AUX 3V15 (sw4)";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
-				regulator-always-on;
-				status = "disabled";
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	lm75: sensor@49 {
-		compatible = "national,lm75b";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lm75>;
-		reg = <0x49>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c32";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	rtc: rtc@51 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	eeprom_ext: eeprom@50 {
-		compatible = "atmel,24c32";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	usb3503: usb@8 {
-		compatible = "smsc,usb3503";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb3503>;
-		reg = <0x08>;
-		connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */
-		intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */
-		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */
-		initial-mode = <1>;
-		clocks = <&refclk>;
-		clock-names = "refclk";
-		refclk-frequency = <12000000>;
-	};
-
-	exc3000: touchscreen@2a {
-		compatible = "eeti,exc3000";
-		reg = <0x2a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctouch>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-	};
-
-	vcnl4035: light-sensor@60 {
-		compatible = "vishay,vcnl4035";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_proximity>;
-		reg = <0x60>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-	linux,rs485-enabled-at-boot-time;
-	rs485-rx-during-tx;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbh2 {
-	pinctrl-names = "idle", "active";
-	pinctrl-0 = <&pinctrl_usbh2_idle>;
-	pinctrl-1 = <&pinctrl_usbh2_active>;
-	vbus-supply = <&reg_usb_h2_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	vbus-supply = <&reg_usb_otg_vbus>;
-	disable-over-current;
-	dr_mode = "otg";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usbphynop1 {
-	clocks = <&clks IMX6QDL_CLK_USBPHY1>;
-	clock-names = "main_clk";
-	vcc-supply = <&reg_usb_h1_vbus>;
-};
-
-&usbphynop2 {
-	vcc-supply = <&reg_usb_h2_vbus>;
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	voltage-ranges = <3300 3300>;
-	vmmc-supply = <&reg_sw4>;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	keep-power-in-suspend;
-	voltage-ranges = <3300 3300>;
-	vmmc-supply = <&reg_sw4>;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-	fsl,ext-reset-output;
-	timeout-sec = <10>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0	/* FEC INT */
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x0001b098
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x0001b098
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x0001b098
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-		>;
-	};
-
-	pinctrl_reset_gpio_led: reset-gpio-led-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18		0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_lcd_enable: lcdenablegrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x1b0b0 /* lcd enable */
-			MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x1b0b0 /* sel6_8 */
-		>;
-	};
-
-	pinctrl_lm75: lm75grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-		>;
-	};
-
-	pinctrl_proximity: proximitygrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0
-		>;
-	};
-
-	pinctrl_rtc: rtc-grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */
-		>;
-	};
-
-	pinctrl_ctouch: ctouch-grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */
-			MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
-			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1
-			MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbh2_idle: usbh2-idle-grp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
-			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018
-		>;
-	};
-
-	pinctrl_usbh2_active: usbh2-active-grp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
-			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018
-		>;
-	};
-
-	pinctrl_usb3503: usb3503-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1    0x00000018
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12     0x1b0b0 /* USB INT */
-			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */
-			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16    0x1b0b0 /* USB Connect */
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017069
-			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00010038
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069
-			MX6QDL_PAD_GPIO_4__SD2_CD_B    0x0001b0b0
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x00017059
-			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x00010059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059
-		>;
-	};
-
-	pinctrl_wdog1: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
deleted file mode 100644
index ead83091e193a..0000000000000
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ /dev/null
@@ -1,409 +0,0 @@
-/*
- * Copyright 2015 Timesys Corporation.
- * Copyright 2015 General Electric Company
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx6q-ba16.dtsi"
-
-/ {
-	mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <22000000>;
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
-		status = "okay";
-	};
-
-	reg_wl18xx_vmmc: regulator-wl18xx {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1807";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	reg_wlan: regulator-wlan {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V_wlan";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
-	};
-
-	sound {
-		compatible = "fsl,imx6q-ba16-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-ba16-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-	};
-
-	mdio0: mdio-gpio {
-		compatible = "virtual,mdio-gpio";
-		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
-			<&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch: switch@0 {
-			compatible = "marvell,mv88e6085"; /* 88e6240*/
-			reg = <0>;
-
-			interrupt-parent = <&gpio2>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			switch_ports: ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switchphy0: switchphy@0 {
-					reg = <0>;
-					interrupt-parent = <&switch>;
-					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				switchphy1: switchphy@1 {
-					reg = <1>;
-					interrupt-parent = <&switch>;
-					interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				switchphy2: switchphy@2 {
-					reg = <2>;
-					interrupt-parent = <&switch>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				switchphy3: switchphy@3 {
-					reg = <3>;
-					interrupt-parent = <&switch>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				switchphy4: switchphy@4 {
-					reg = <4>;
-					interrupt-parent = <&switch>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-		};
-	};
-};
-
-&ecspi5 {
-	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi5>;
-	status = "okay";
-
-	m25_eeprom: flash@0 {
-		compatible = "atmel,at25";
-		spi-max-frequency = <10000000>;
-		size = <0x8000>;
-		pagesize = <64>;
-		reg = <0>;
-		address-width = <16>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	pca9547: mux@70 {
-		compatible = "nxp,pca9547";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mux1_i2c1: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-
-			ads7830: ads7830@48 {
-				compatible = "ti,ads7830";
-				reg = <0x48>;
-			};
-
-			mma8453: mma8453@1c {
-				compatible = "fsl,mma8453";
-				reg = <0x1c>;
-			};
-		};
-
-		mux1_i2c2: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1>;
-
-			eeprom: eeprom@50 {
-				compatible = "atmel,24c08";
-				reg = <0x50>;
-			};
-
-			mpl3115: mpl3115@60 {
-				compatible = "fsl,mpl3115";
-				reg = <0x60>;
-			};
-		};
-
-		mux1_i2c3: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-		};
-
-		mux1_i2c4: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3>;
-
-			sgtl5000: codec@a {
-				compatible = "fsl,sgtl5000";
-				reg = <0x0a>;
-				clocks = <&mclk>;
-				VDDA-supply = <&reg_1p8v>;
-				VDDIO-supply = <&reg_3p3v>;
-			};
-		};
-
-		mux1_i2c5: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4>;
-
-			pca9539: pca9539@74 {
-				compatible = "nxp,pca9539";
-				reg = <0x74>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				interrupt-parent = <&gpio2>;
-				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-
-				P12-hog {
-					gpio-hog;
-					gpios = <10 0>;
-					output-low;
-					line-name = "PCA9539-P12";
-				};
-
-				P13-hog {
-					gpio-hog;
-					gpios = <11 0>;
-					output-low;
-					line-name = "PCA9539-P13";
-				};
-
-				P14-hog {
-					gpio-hog;
-					gpios = <12 0>;
-					output-low;
-					line-name = "PCA9539-P14";
-				};
-
-				P15-hog {
-					gpio-hog;
-					gpios = <13 0>;
-					output-low;
-					line-name = "PCA9539-P15";
-				};
-
-				P16-hog {
-					gpio-hog;
-					gpios = <14 0>;
-					output-low;
-					line-name = "PCA9539-P16";
-				};
-
-				P17-hog {
-					gpio-hog;
-					gpios = <15 0>;
-					output-low;
-					line-name = "PCA9539-P17";
-				};
-			};
-		};
-
-		mux1_i2c6: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x5>;
-		};
-
-		mux1_i2c7: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x6>;
-		};
-
-		mux1_i2c8: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x7>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&i2c3 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&iomuxc {
-	pinctrl_i2c1_gpio: i2c1gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x1b0b0
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13	0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
-		>;
-	};
-};
-
-&pmu {
-	secure-reg-access;
-};
-
-&usdhc2 {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_wl18xx_vmmc>;
-	no-1-8-v;
-	non-removable;
-	wakeup-source;
-	keep-power-in-suspend;
-	cap-power-off-card;
-	max-frequency = <25000000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1837";
-		reg = <2>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
-
-&pcie {
-	/* Synopsys, Inc. Device */
-	pci_root: root@0,0 {
-		compatible = "pci16c3,abcd";
-		reg = <0x00000000 0 0 0 0>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
-			  <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>,
-			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>,
-			  <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
-};
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
deleted file mode 100644
index 1ad41c944b4b9..0000000000000
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ /dev/null
@@ -1,491 +0,0 @@
-/*
- * Copyright 2013 CompuLab Ltd.
- *
- * Author: Valentin Raevsky <valentin@compulab.co.il>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "CompuLab CM-FX6";
-	compatible = "compulab,cm-fx6", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat-led {
-			label = "Heartbeat";
-			gpios = <&gpio2 31 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	awnh387_pwrseq: pwrseq {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pwrseq>;
-		compatible = "mmc-pwrseq-sd8787";
-		powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-pcie-power-on-gpio";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_usb_h1_vbus: usb_h1_vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg_vbus: usb_otg_vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound-analog {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "On-board analog audio";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Line", "Line Out",
-			"Microphone", "Mic Jack",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Headphone Jack", "RHPOUT",
-			"Headphone Jack", "LHPOUT",
-			"MICIN", "Mic Bias",
-			"Mic Bias", "Mic Jack";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_master>;
-		simple-audio-card,frame-master = <&sound_master>;
-		simple-audio-card,bitclock-inversion;
-
-		sound_master: simple-audio-card,cpu {
-			sound-dai = <&ssi2>;
-			system-clock-frequency = <2822400>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&wm8731>;
-		};
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
-		spdif-in;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	ssi2 {
-		fsl,audmux-port = <1>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_RCLKDIR |
-			IMX_AUDMUX_V2_PTCR_RCSEL(3 | 0x8) |
-			IMX_AUDMUX_V2_PTCR_TCLKDIR |
-			IMX_AUDMUX_V2_PTCR_TCSEL(3))
-			IMX_AUDMUX_V2_PDCR_RXDSEL(3)
-		>;
-	};
-
-	audmux4 {
-		fsl,audmux-port = <3>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSDIR |
-			IMX_AUDMUX_V2_PTCR_TFSEL(1) |
-			IMX_AUDMUX_V2_PTCR_RCLKDIR |
-			IMX_AUDMUX_V2_PTCR_RCSEL(1 | 0x8) |
-			IMX_AUDMUX_V2_PTCR_TCLKDIR |
-			IMX_AUDMUX_V2_PTCR_TCSEL(1))
-			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
-		>;
-	};
-};
-
-&cpu0 {
-	/*
-	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
-	 * the module behaves unstable at this frequency. Hence, remove the
-	 * 1.2GHz operation point here.
-	 */
-	operating-points = <
-		/* kHz	uV */
-		996000	1250000
-		852000	1250000
-		792000	1175000
-		396000	975000
-	>;
-	fsl,soc-operating-points = <
-		/* ARM kHz	SOC-PU uV */
-		996000		1250000
-		852000		1250000
-		792000		1175000
-		396000		1175000
-	>;
-};
-
-&cpu1 {
-	/*
-	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
-	 * the module behaves unstable at this frequency. Hence, remove the
-	 * 1.2GHz operation point here.
-	 */
-	operating-points = <
-		/* kHz	uV */
-		996000	1250000
-		852000	1250000
-		792000	1175000
-		396000	975000
-	>;
-	fsl,soc-operating-points = <
-		/* ARM kHz	SOC-PU uV */
-		996000		1250000
-		852000		1250000
-		792000		1175000
-		396000		1175000
-	>;
-};
-
-&cpu2 {
-	/*
-	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
-	 * the module behaves unstable at this frequency. Hence, remove the
-	 * 1.2GHz operation point here.
-	 */
-	operating-points = <
-		/* kHz	uV */
-		996000	1250000
-		852000	1250000
-		792000	1175000
-		396000	975000
-	>;
-	fsl,soc-operating-points = <
-		/* ARM kHz	SOC-PU uV */
-		996000		1250000
-		852000		1250000
-		792000		1175000
-		396000		1175000
-	>;
-};
-
-&cpu3 {
-	/*
-	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
-	 * the module behaves unstable at this frequency. Hence, remove the
-	 * 1.2GHz operation point here.
-	 */
-	operating-points = <
-		/* kHz	uV */
-		996000	1250000
-		852000	1250000
-		792000	1175000
-		396000	975000
-	>;
-	fsl,soc-operating-points = <
-		/* ARM kHz	SOC-PU uV */
-		996000		1250000
-		852000		1250000
-		792000		1175000
-		396000		1175000
-	>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-	clock-frequency = <100000>;
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	wm8731: codec@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8731";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__AUD4_RXC   0x17059
-			MX6QDL_PAD_SD2_DAT0__AUD4_RXD  0x17059
-			MX6QDL_PAD_SD2_DAT3__AUD4_TXC  0x17059
-			MX6QDL_PAD_SD2_DAT2__AUD4_TXD  0x17059
-			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x17059
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x100b1
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x100b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwrseq: pwrseqgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
-		>;
-	};
-
-	pinctrl_spdif: spdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
-			MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbh1: usbh1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x130b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
-			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
-		>;
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie_power_on_gpio>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&ssi2 {
-	assigned-clocks = <&clks IMX6QDL_CLK_SSI2_SEL>,
-			<&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <0>, <786432000>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	mmc-pwrseq = <&awnh387_pwrseq>;
-	non-removable;
-	/*
-	 * If the OS probes the Bluetooth AMP function advertised on this bus
-	 * but the firmware in place does not support it, the WiFi/BT module
-	 * gets unresponsive.
-	 * Users who configured their OS properly can enable this node to gain
-	 * WiFi and/or plain Bluetooth support.
-	 */
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts
deleted file mode 100644
index 3e59ebbb36086..0000000000000
--- a/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-sr-som-emmc.dtsi"
-#include "imx6qdl-cubox-i.dtsi"
-
-/ {
-	model = "SolidRun Cubox-i Dual/Quad (1.5som+emmc)";
-	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-	fsl,transmit-level-mV = <1104>;
-	fsl,transmit-boost-mdB = <0>;
-	fsl,transmit-atten-16ths = <9>;
-	fsl,no-spread-spectrum;
-};
diff --git a/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts b/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts
deleted file mode 100644
index dab70d1230a29..0000000000000
--- a/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright (C) 2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-cubox-i.dtsi"
-
-/ {
-	model = "SolidRun Cubox-i Dual/Quad (1.5som)";
-	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-	fsl,transmit-level-mV = <1104>;
-	fsl,transmit-boost-mdB = <0>;
-	fsl,transmit-atten-16ths = <9>;
-	fsl,no-spread-spectrum;
-};
diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts
deleted file mode 100644
index 1c7b262e37094..0000000000000
--- a/arch/arm/boot/dts/imx6q-cubox-i.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright (C) 2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-brcm.dtsi"
-#include "imx6qdl-cubox-i.dtsi"
-
-/ {
-	model = "SolidRun Cubox-i Dual/Quad";
-	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-	fsl,transmit-level-mV = <1104>;
-	fsl,transmit-boost-mdB = <0>;
-	fsl,transmit-atten-16ths = <9>;
-	fsl,no-spread-spectrum;
-};
diff --git a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
deleted file mode 100644
index 8bfe6337cd650..0000000000000
--- a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
- */
-
-#ifndef __DTS_V1__
-#define __DTS_V1__
-/dts-v1/;
-#endif
-
-#include "imx6q.dtsi"
-#include "imx6qdl-dfi-fs700-m60.dtsi"
-
-/ {
-	model = "DFI FS700-M60-6QD i.MX6qd Q7 Board";
-	compatible = "dfi,fs700-m60-6qd", "dfi,fs700e-m60", "fsl,imx6q";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
deleted file mode 100644
index d4d57370615d8..0000000000000
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2015-2021 DH electronics GmbH
- * Copyright (C) 2018 Marek Vasut <marex@denx.de>
- *
- * DHCOM iMX6 variant:
- * DHCM-iMX6Q-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
- * DHCOM PCB number: 493-300 or newer
- * PDK2 PCB number: 516-400 or newer
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-dhcom-som.dtsi"
-#include "imx6qdl-dhcom-pdk2.dtsi"
-
-/ {
-	model = "DH electronics i.MX6Q DHCOM on Premium Developer Kit (2)";
-	compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som",
-		     "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
deleted file mode 100644
index 16658b76fc4e8..0000000000000
--- a/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2017
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q-display5.dtsi"
-
-&panel {
-	compatible = "tianma,tm070jdhg30";
-};
-
-&ldb {
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi
deleted file mode 100644
index fef5d72545365..0000000000000
--- a/arch/arm/boot/dts/imx6q-display5.dtsi
+++ /dev/null
@@ -1,596 +0,0 @@
-/*
- * Copyright 2017
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	model = "Liebherr (LWN) display5 i.MX6 Quad Board";
-	compatible = "lwn,display5", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	backlight_lvds: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm2 0 5000000 0>;
-		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
-				      10  11  12  13  14  15  16  17  18  19
-				      20  21  22  23  24  25  26  27  28  29
-				      30  31  32  33  34  35  36  37  38  39
-				      40  41  42  43  44  45  46  47  48  49
-				      50  51  52  53  54  55  56  57  58  59
-				      60  61  62  63  64  65  66  67  68  69
-				      70  71  72  73  74  75  76  77  78  79
-				      80  81  82  83  84  85  86  87  88  89
-				      90  91  92  93  94  95  96  97  98  99
-				     100 101 102 103 104 105 106 107 108 109
-				     110 111 112 113 114 115 116 117 118 119
-				     120 121 122 123 124 125 126 127 128 129
-				     130 131 132 133 134 135 136 137 138 139
-				     140 141 142 143 144 145 146 147 148 149
-				     150 151 152 153 154 155 156 157 158 159
-				     160 161 162 163 164 165 166 167 168 169
-				     170 171 172 173 174 175 176 177 178 179
-				     180 181 182 183 184 185 186 187 188 189
-				     190 191 192 193 194 195 196 197 198 199
-				     200 201 202 203 204 205 206 207 208 209
-				     210 211 212 213 214 215 216 217 218 219
-				     220 221 222 223 224 225 226 227 228 229
-				     230 231 232 233 234 235 236 237 238 239
-				     240 241 242 243 244 245 246 247 248 249
-				     250 251 252 253 254 255>;
-		default-brightness-level = <250>;
-		enable-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_lvds: regulator-lvds {
-		compatible = "regulator-fixed";
-		regulator-name = "lvds_ppen";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_lvds>;
-		gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usbh1_vbus: usb-h1-vbus {
-		compatible = "regulator-fixed";
-		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1_vbus>;
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-enable-ramp-delay = <300000>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		label = "tfa9879-mono";
-
-		simple-audio-card,dai-link {
-			/* DAC */
-			format = "i2s";
-			bitclock-master = <&dailink_master>;
-			frame-master = <&dailink_master>;
-
-			dailink_master: cpu {
-			    sound-dai = <&ssi2>;
-			};
-			codec {
-			    sound-dai = <&codec>;
-			};
-		};
-	};
-
-	panel: panel-lvds0 {
-		backlight = <&backlight_lvds>;
-		power-supply = <&reg_lvds>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	ssi2 {
-		fsl,audmux-port = <1>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			 IMX_AUDMUX_V2_PTCR_TFSEL(5) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(5) |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(5)
-		>;
-	};
-
-	aud6 {
-		fsl,audmux-port = <5>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_RFSEL(8) |
-			 IMX_AUDMUX_V2_PTCR_RCSEL(8) |
-			 IMX_AUDMUX_V2_PTCR_TFSEL(1) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(1) |
-			 IMX_AUDMUX_V2_PTCR_RFSDIR |
-			 IMX_AUDMUX_V2_PTCR_RCLKDIR |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
-		>;
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs &pinctrl_ecspi2_flwp>;
-	status = "okay";
-
-	s25fl256s: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <40000000>;
-		reg = <0>;
-
-		partition@0 {
-			label = "SPL (spi)";
-			reg = <0x0 0x20000>;
-			read-only;
-		};
-		partition@1 {
-			label = "u-boot (spi)";
-			reg = <0x20000 0x100000>;
-			read-only;
-		};
-		partition@2 {
-			label = "uboot-env (spi)";
-			reg = <0x120000 0x10000>;
-		};
-		partition@3 {
-			label = "uboot-envr (spi)";
-			reg = <0x130000 0x10000>;
-		};
-		partition@4 {
-			label = "linux-recovery (spi)";
-			reg = <0x140000 0x800000>;
-		};
-		partition@5 {
-			label = "swupdate-fitImg (spi)";
-			reg = <0x940000 0x400000>;
-		};
-		partition@6 {
-			label = "swupdate-initramfs (spi)";
-			reg = <0xD40000 0x800000>;
-		};
-	};
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-handle = <&ethernet_phy0>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		ethernet_phy0: ethernet-phy@0 {
-			compatible = "marvell,88E1510";
-			device_type = "ethernet-phy";
-			/* Set LED0 control: */
-			/* On - Link, Blink - Activity, Off - No Link */
-			marvell,reg-init = <3 0x10 0 0x1011>;
-			max-speed = <100>;
-			reg = <0>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: tfa9879@6c {
-		#sound-dai-cells = <0>;
-		compatible = "nxp,tfa9879";
-		reg = <0x6C>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	at24@50 {
-		compatible = "atmel,24c256";
-		pagesize = <64>;
-		reg = <0x50>;
-	};
-
-	pfuze100: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	pinctrl-0 = <&pinctrl_usbh1>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			/* I2S OUTPUT AUD6*/
-			MX6QDL_PAD_DI0_PIN4__AUD6_RXD  0x130b0
-			MX6QDL_PAD_DI0_PIN2__AUD6_TXD  0x130b0
-			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS  0x130b0
-			MX6QDL_PAD_DI0_PIN15__AUD6_TXC  0x130b0
-		>;
-	};
-
-	pinctrl_backlight: dispgrp {
-		fsl,pins = <
-			/* BLEN_OUT */
-			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07    0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
-			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
-			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
-		>;
-	};
-
-	pinctrl_ecspi2_cs: ecspi2csgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1
-		>;
-	};
-
-	pinctrl_ecspi2_flwp: ecspi2flwpgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-		>;
-	};
-
-	pinctrl_ecspi3_cs: ecspi3csgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi3_flwp: ecspi3flwpgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
-			MX6QDL_PAD_EIM_D16__I2C2_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__I2C3_SCL	0x4001b8b1
-			MX6QDL_PAD_EIM_D18__I2C3_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_reg_lvds: reqlvdsgrp {
-		fsl,pins = <
-			/* LVDS_PPEN_OUT */
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13      0x1b0b0
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA    0x1b0b1
-		>;
-	};
-
-	pinctrl_usbh1: usbh1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__USB_H1_OC  0x030b0
-		>;
-	};
-
-	pinctrl_usbh1_vbus: usbh1_vbus_grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET	0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
deleted file mode 100644
index 9591848cbd37c..0000000000000
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ /dev/null
@@ -1,481 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Data Modul AG
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Data Modul eDM-QMX6 Board";
-	compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	aliases {
-		gpio7 = &stmpe_gpio1;
-		gpio8 = &stmpe_gpio2;
-		stmpe-i2c0 = &stmpe1;
-		stmpe-i2c1 = &stmpe2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_switch: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_switch";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio7 12 0>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		reg_usb_host1: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_host1_en";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 31 0>;
-			enable-active-high;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led-blue {
-			label = "blue";
-			gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-green {
-			label = "green";
-			gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pink {
-			label = "pink";
-			gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-red {
-			label = "red";
-			gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&ecspi5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi5>;
-	cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "m25p80", "jedec,spi-nor";
-		spi-max-frequency = <40000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-supply = <&vgen2_1v2_eth>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2
-		     &pinctrl_stmpe1
-		     &pinctrl_stmpe2
-		     &pinctrl_pfuze>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <20 8>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_1v2_eth: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vdd_high_in: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	stmpe1: stmpe1601@40 {
-		compatible = "st,stmpe1601";
-		reg = <0x40>;
-		interrupts = <30 0>;
-		interrupt-parent = <&gpio3>;
-		vcc-supply = <&sw2_reg>;
-		vio-supply = <&sw2_reg>;
-
-		stmpe_gpio1: stmpe_gpio {
-			#gpio-cells = <2>;
-			compatible = "st,stmpe-gpio";
-		};
-	};
-
-	stmpe2: stmpe1601@44 {
-		compatible = "st,stmpe1601";
-		reg = <0x44>;
-		interrupts = <2 0>;
-		interrupt-parent = <&gpio5>;
-		vcc-supply = <&sw2_reg>;
-		vio-supply = <&sw2_reg>;
-
-		stmpe_gpio2: stmpe_gpio {
-			#gpio-cells = <2>;
-			compatible = "st,stmpe-gpio";
-		};
-	};
-
-	temp1: ad7414@4c {
-		compatible = "ad,ad7414";
-		reg = <0x4c>;
-	};
-
-	temp2: ad7414@4d {
-		compatible = "ad,ad7414";
-		reg = <0x4d>;
-	};
-
-	rtc: m41t62@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-dmo-edmqmx6 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
-				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi5: ecspi5rp-1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x80000000
-				MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x80000000
-				MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x80000000
-				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x80000000
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x100b1
-			>;
-		};
-
-		pinctrl_pfuze: pfuze100grp1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x80000000
-			>;
-		};
-
-		pinctrl_stmpe1: stmpe1grp {
-			fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
-		};
-
-		pinctrl_stmpe2: stmpe2grp {
-			fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host1>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	bus-width = <8>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts
deleted file mode 100644
index 137db38f0d27b..0000000000000
--- a/arch/arm/boot/dts/imx6q-dms-ba16.dts
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q-ba16.dtsi"
-
-/ {
-	model = "Advantech DMS-BA16";
-	compatible = "advantech,imx6q-dms-ba16", "advantech,imx6q-ba16", "fsl,imx6q";
-
-	reg_usb_otg_vbus: regulator-usbotgvbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotgvbus>;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sys_mclk: clock-sys-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <22000000>;
-	};
-
-	sound {
-		compatible = "fsl,imx6q-ba16-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-ba16-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&ecspi5 {
-	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi5>;
-	status = "okay";
-
-	m25_eeprom: flash@0 {
-		compatible = "atmel,at25256B", "atmel,at25";
-		spi-max-frequency = <20000000>;
-		size = <0x8000>;
-		pagesize = <64>;
-		reg = <0>;
-		address-width = <16>;
-	};
-};
-
-&iomuxc {
-	pinctrl_i2c1_gpio: i2c1gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26        0x1b0b0
-			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27        0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03   0x1b0b0
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
-		>;
-	};
-
-	pinctrl_usbotgvbus: usbotgvbusgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&sys_mclk>;
-		lrclk-strength = <0x3>;
-		VDDA-supply = <&reg_1p8v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&sata {
-	fsl,no-spread-spectrum;
-	fsl,transmit-atten-16ths = <12>;
-	fsl,transmit-boost-mdB = <3330>;
-	fsl,transmit-level-mV = <1133>;
-	fsl,receive-dpll-mode = <1>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-ds.dts b/arch/arm/boot/dts/imx6q-ds.dts
deleted file mode 100644
index b0a63a1339778..0000000000000
--- a/arch/arm/boot/dts/imx6q-ds.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2021 Dillon Min <dillon.minfei@gmail.com>
-//
-// Based on imx6qdl-sabresd.dtsi which is:
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-ds.dtsi"
-
-/ {
-	model = "DaSheng i.MX6 Quad Com-9xx Board";
-	compatible = "ds,imx6q-sbc", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-emcon-avari.dts b/arch/arm/boot/dts/imx6q-emcon-avari.dts
deleted file mode 100644
index 0f582a9d4c0e6..0000000000000
--- a/arch/arm/boot/dts/imx6q-emcon-avari.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
-//
-// Copyright (C) 2018 emtrion GmbH
-//
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-emcon.dtsi"
-#include "imx6qdl-emcon-avari.dtsi"
-
-/ {
-	model = "emtrion SoM emCON-MX6 Dual/Quad on Avari";
-	compatible = "emtrion,emcon-mx6-avari", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
deleted file mode 100644
index 78d941fef5dfb..0000000000000
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ /dev/null
@@ -1,518 +0,0 @@
-/*
- * Copyright 2016 United Western Technologies.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Uniwest Evi";
-	compatible = "uniwest,imx6q-evi", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	reg_usbh1_vbus: regulator-usbhubreset {
-		compatible = "regulator-fixed";
-		regulator-name = "usbh1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		startup-delay-us = <2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1_hubreset>;
-		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usb_otg_vbus: regulator-usbotgvbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotgvbus>;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	panel {
-		compatible = "sharp,lq101k1ly04";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
-	status = "okay";
-
-	fpga: fpga@0 {
-		compatible = "altr,fpga-passive-serial";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		pinctrl-0 = <&pinctrl_fpgaspi>;
-		nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-		nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
-		<&gpio4 25 GPIO_ACTIVE_LOW>,
-		<&gpio4 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3cs>;
-	status = "okay";
-};
-
-&ecspi5 {
-	cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
-		<&gpio1 13 GPIO_ACTIVE_LOW>,
-		<&gpio1 12 GPIO_ACTIVE_LOW>,
-		<&gpio2 9 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>;
-	status = "okay";
-
-	eeprom: m95m02@1 {
-		compatible = "st,m95m02", "atmel,at25";
-		size = <262144>;
-		pagesize = <256>;
-		address-width = <24>;
-		spi-max-frequency = <5000000>;
-		reg = <1>;
-	};
-
-	pb_rtc: rtc@3 {
-		compatible = "nxp,rtc-pcf2123";
-		spi-max-frequency = <2450000>;
-		spi-cs-high;
-		reg = <3>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	/delete-property/ interrupts;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpminand>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	clock-frequency = <100000>;
-	scl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	battery: sbs-battery@b {
-		compatible = "sbs,sbs-battery";
-		reg = <0x0b>;
-		sbs,poll-retry-count = <100>;
-		sbs,i2c-retry-count = <100>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	non-removable;
-	status = "okay";
-};
-
-&weim {
-	ranges = <0 0 0x08000000 0x08000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			/* pwr mcu alert irq */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
-			/* remainder ???? */
-			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
-			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
-			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
-		>;
-	};
-
-	pinctrl_ecspi1cs: ecspi1csgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x10068
-			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x10068
-			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x1f068
-		>;
-	};
-
-	pinctrl_ecspi3cs: ecspi3csgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
-			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0
-			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
-			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi5: ecspi5grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK 0x100b1
-			MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI 0x100b1
-			MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO 0x100b1
-		>;
-	};
-
-	pinctrl_ecspi5cs: ecspi5csgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
-			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
-			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
-			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
-			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
-		>;
-	};
-
-	pinctrl_fpgaspi: fpgaspigrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
-		>;
-	};
-
-	pinctrl_gpminand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-			MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
-			MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
-			MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001b8b1
-		>;
-	};
-
-	pinctrl_weimcs: weimcsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
-			MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1
-		>;
-	};
-
-	pinctrl_weimfpga: weimfpgagrp {
-		fsl,pins = <
-			/* weim misc */
-			MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
-			MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
-			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
-			MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0b1
-			MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0b1
-			MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0xb0b1
-			MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0xb0b1
-			MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0xb0b1
-			MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0xb0b1
-			/* weim data */
-			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0
-			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0
-			MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
-			MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
-			MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
-			MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
-			MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
-			MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
-			MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
-			MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
-			MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
-			MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
-			MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
-			MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
-			MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
-			MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
-			MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
-			MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
-			/* weim address */
-			MX6QDL_PAD_EIM_A25__EIM_ADDR25 0xb0b1
-			MX6QDL_PAD_EIM_A24__EIM_ADDR24 0xb0b1
-			MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
-			MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
-			MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
-			MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
-			MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
-			MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
-			MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
-			MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
-			MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
-			MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
-			MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
-			MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
-			MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
-			MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
-			MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
-			MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
-			MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
-			MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
-			MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
-			MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
-			MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
-			MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
-			MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
-			MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
-			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
-			MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x1b0b1
-			MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbh1: usbh1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0
-			/* usbh1_b OC */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
-		>;
-	};
-
-	pinctrl_usbh1_hubreset: usbh1hubresetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-			MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
-		>;
-	};
-
-	pinctrl_usbotgvbus: usbotgvbusgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
-			MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
deleted file mode 100644
index 2fda68f9d3f64..0000000000000
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2013 Philipp Zabel
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Zealz GK802";
-	compatible = "zealz,imx6q-gk802", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		recovery-button {
-			label = "recovery";
-			gpios = <&gpio3 16 1>;
-			linux,code = <KEY_RESTART>;
-			wakeup-source;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-/* Internal I2C */
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	/* SDMC DM2016 1024 bit EEPROM + 128 bit OTP */
-	eeprom: dm2016@51 {
-		compatible = "sdmc,dm2016";
-		reg = <0x51>;
-	};
-};
-
-/* External I2C via HDMI */
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-gk802 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* Recovery button, active-low */
-				MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x100b1
-				/* RTL8192CU enable GPIO, active-low */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-/* External USB-A port (USBOTG) */
-&usbotg {
-	disable-over-current;
-	status = "okay";
-};
-
-/* Internal USB port (USBH1), connected to RTL8192CU */
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-/* External microSD */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-/* Internal microSD */
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts
deleted file mode 100644
index f80173458e3f1..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw51xx.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Gateworks Corporation
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw51xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW51XX";
-	compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw52xx.dts b/arch/arm/boot/dts/imx6q-gw52xx.dts
deleted file mode 100644
index 6e1c493c9c8c4..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw52xx.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Gateworks Corporation
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw52xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW52XX";
-	compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
-};
-
-&i2c3 {
-	adv7180: camera@20 {
-		compatible = "adi,adv7180";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_adv7180>;
-		reg = <0x20>;
-		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-
-		port {
-			adv7180_to_ipu2_csi1_mux: endpoint {
-				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
-				bus-width = <8>;
-			};
-		};
-	};
-};
-
-&ipu2_csi1_from_ipu2_csi1_mux {
-	bus-width = <8>;
-};
-
-&ipu2_csi1_mux_from_parallel_sensor {
-	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
-	bus-width = <8>;
-};
-
-&ipu2_csi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu2_csi1>;
-};
-
-&iomuxc {
-	pinctrl_adv7180: adv7180grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
-		>;
-	};
-
-	pinctrl_ipu2_csi1: ipu2_csi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
-			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
-			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
-			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
-			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
-			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
-			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
-			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
-			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
-			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
-			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
-		>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw53xx.dts b/arch/arm/boot/dts/imx6q-gw53xx.dts
deleted file mode 100644
index f13df8e9c8c4b..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw53xx.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Gateworks Corporation
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw53xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW53XX";
-	compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
-};
-
-&i2c3 {
-	adv7180: camera@20 {
-		compatible = "adi,adv7180";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_adv7180>;
-		reg = <0x20>;
-		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-
-		port {
-			adv7180_to_ipu2_csi1_mux: endpoint {
-				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
-				bus-width = <8>;
-			};
-		};
-	};
-};
-
-&ipu2_csi1_from_ipu2_csi1_mux {
-	bus-width = <8>;
-};
-
-&ipu2_csi1_mux_from_parallel_sensor {
-	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
-	bus-width = <8>;
-};
-
-&ipu2_csi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu2_csi1>;
-};
-
-&sata {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_adv7180: adv7180grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
-		>;
-	};
-
-	pinctrl_ipu2_csi1: ipu2_csi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
-			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
-			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
-			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
-			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
-			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
-			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
-			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
-			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
-			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
-			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
deleted file mode 100644
index 522a51042965a..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ /dev/null
@@ -1,510 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Gateworks Corporation
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Gateworks Ventana GW5400-A";
-	compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
-
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		ssi0 = &ssi1;
-		spi0 = &ecspi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: led-user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p0v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_h1_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-ventana-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "sgtl5000-audio";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "sst,w25q256", "jedec,spi-nor";
-		spi-max-frequency = <30000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	accelerometer: mma8450@1c {
-		compatible = "fsl,mma8450";
-		reg = <0x1c>;
-	};
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&sw4_reg>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	touchscreen: egalax_ts@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>;
-		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&ldb {
-	status = "okay";
-};
-
-&pcie {
-	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0 /* SPINOR_CS0# */
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0 /* user1 led */
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0 /* user2 led */
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* user3 led */
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0 /* GPS_PPS */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts
deleted file mode 100644
index d5d46908cf6ed..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw54xx.dts
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Gateworks Corporation
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw54xx.dtsi"
-#include <dt-bindings/media/tda1997x.h>
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
-	compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
-
-	sound-digital {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "tda1997x-audio";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_codec>;
-		simple-audio-card,frame-master = <&sound_codec>;
-
-		sound_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi2>;
-		};
-
-		sound_codec: simple-audio-card,codec {
-			sound-dai = <&hdmi_receiver>;
-		};
-	};
-};
-
-&i2c3 {
-	adv7180: camera@20 {
-		compatible = "adi,adv7180";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_adv7180>;
-		reg = <0x20>;
-		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-
-		port {
-			adv7180_to_ipu2_csi1_mux: endpoint {
-				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
-				bus-width = <8>;
-			};
-		};
-	};
-
-	hdmi_receiver: hdmi-receiver@48 {
-		compatible = "nxp,tda19971";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tda1997x>;
-		reg = <0x48>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		DOVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&sw4_reg>;
-		DVDD-supply = <&sw4_reg>;
-		#sound-dai-cells = <0>;
-		nxp,audout-format = "i2s";
-		nxp,audout-layout = <0>;
-		nxp,audout-width = <16>;
-		nxp,audout-mclk-fs = <128>;
-		/*
-		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
-		 * and Y[11:4] across 16bits in the same cycle
-		 * which we map to VP[15:08]<->CSI_DATA[19:12]
-		 */
-		nxp,vidout-portcfg =
-			/*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
-			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
-			/*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
-			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
-			/*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
-			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
-			/*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
-			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
-
-		port {
-			tda1997x_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <16>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				data-active = <1>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <16>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
-	bus-width = <16>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&ipu2_csi1_from_ipu2_csi1_mux {
-	bus-width = <8>;
-};
-
-&ipu2_csi1_mux_from_parallel_sensor {
-	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
-	bus-width = <8>;
-};
-
-&ipu2_csi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu2_csi1>;
-};
-
-&sata {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_adv7180: adv7180grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1_csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
-			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
-			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
-		>;
-	};
-
-	pinctrl_ipu2_csi1: ipu2_csi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
-			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
-			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
-			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
-			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
-			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
-			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
-			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
-			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
-			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
-			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
-		>;
-	};
-
-	pinctrl_tda1997x: tda1997xgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-gw551x.dts b/arch/arm/boot/dts/imx6q-gw551x.dts
deleted file mode 100644
index 2c7feeef1b0e0..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw551x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw551x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW551X";
-	compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw552x.dts b/arch/arm/boot/dts/imx6q-gw552x.dts
deleted file mode 100644
index c973b73042254..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw552x.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2014 Gateworks Corporation
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-gw552x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW552X";
-	compatible = "gw,imx6q-gw552x", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw553x.dts b/arch/arm/boot/dts/imx6q-gw553x.dts
deleted file mode 100644
index e9c224cea7522..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw553x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw553x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
-	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw560x.dts b/arch/arm/boot/dts/imx6q-gw560x.dts
deleted file mode 100644
index 735f2bbf14397..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw560x.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw560x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW560X";
-	compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5903.dts b/arch/arm/boot/dts/imx6q-gw5903.dts
deleted file mode 100644
index a182e4cb0e6ec..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw5903.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5903.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5903";
-	compatible = "gw,imx6q-gw5903", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5904.dts b/arch/arm/boot/dts/imx6q-gw5904.dts
deleted file mode 100644
index ca1e2ae3341ec..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw5904.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5904.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5904";
-	compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5907.dts b/arch/arm/boot/dts/imx6q-gw5907.dts
deleted file mode 100644
index b25526ef58861..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw5907.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 Gateworks Corporation
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5907.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5907";
-	compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5910.dts b/arch/arm/boot/dts/imx6q-gw5910.dts
deleted file mode 100644
index 6aafa2fcee08a..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw5910.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 Gateworks Corporation
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5910.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5910";
-	compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5912.dts b/arch/arm/boot/dts/imx6q-gw5912.dts
deleted file mode 100644
index 4dcbd943cd935..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw5912.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 Gateworks Corporation
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5912.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5912";
-	compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5913.dts b/arch/arm/boot/dts/imx6q-gw5913.dts
deleted file mode 100644
index 6f511f1665fd7..0000000000000
--- a/arch/arm/boot/dts/imx6q-gw5913.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 Gateworks Corporation
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5913.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5913";
-	compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
deleted file mode 100644
index 6406ade14f57b..0000000000000
--- a/arch/arm/boot/dts/imx6q-h100.dts
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-brcm.dtsi"
-
-/ {
-	model = "Auvidea H100";
-	compatible = "auvidea,h100", "fsl,imx6q";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	aliases {
-		rtc0 = &rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	hdmi_osc: hdmi-osc {
-		compatible = "fixed-clock";
-		clock-output-names = "hdmi-osc";
-		clock-frequency = <27000000>;
-		#clock-cells = <0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_leds>;
-
-		led0: led-power {
-			label = "power";
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		led1: led-stream {
-			label = "stream";
-			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led2: led-rec {
-			label = "rec";
-			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_hdmi: regulator-hdmi {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		regulator-name = "V_HDMI";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usbh1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
-		regulator-name = "USB_H1_VBUS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbotg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
-		regulator-name = "USB_OTG_VBUS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	sound-sgtl5000 {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "H100 on-board codec";
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-ext-port = <5>;
-		mux-int-port = <1>;
-		ssi-controller = <&ssi1>;
-	};
-};
-
-&audmux {
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_i2c1>;
-	status = "okay";
-
-	eeprom: 24c02@51 {
-		compatible = "microchip,24c02", "atmel,24c02";
-		reg = <0x51>;
-	};
-
-	rtc: pcf8523@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	sgtl5000: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	tc358743: tc358743@f {
-		compatible = "toshiba,tc358743";
-		reg = <0x0f>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_tc358743>;
-		clocks = <&hdmi_osc>;
-		clock-names = "refclk";
-		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-		/* IRQ has a wrong pull resistor which renders it useless  */
-
-		port {
-			tc358743_out: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				data-lanes = <1 2 3 4>;
-				clock-lanes = <0>;
-				clock-noncontinuous;
-				link-frequencies = /bits/ 64 <297000000>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	h100 {
-		pinctrl_h100_hdmi: h100-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
-			>;
-		};
-
-		pinctrl_h100_i2c1: h100-i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_h100_i2c2: h100-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_h100_leds: pinctrl-h100-leds {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
-				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_reg_hdmi: h100-reg-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_sgtl5000: h100-sgtl5000 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
-			>;
-		};
-
-		pinctrl_h100_tc358743: h100-tc358743 {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_uart2: h100-uart2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
-			>;
-		};
-
-		pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usdhc2: h100-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
-			>;
-		};
-	};
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port {
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&tc358743_out>;
-			data-lanes = <1 2 3 4>;
-			clock-lanes = <0>;
-			clock-noncontinuous;
-			link-frequencies = /bits/ 64 <297000000>;
-		};
-	};
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_h100_usdhc2>;
-	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts
deleted file mode 100644
index c51b4e4fd71e0..0000000000000
--- a/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
- * Based on dt work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-sr-som-emmc.dtsi"
-#include "imx6qdl-hummingboard.dtsi"
-
-/ {
-	model = "SolidRun HummingBoard Dual/Quad (1.5som+emmc)";
-	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-	fsl,transmit-level-mV = <1025>;
-	fsl,transmit-boost-mdB = <3330>;
-	fsl,transmit-atten-16ths = <9>;
-	fsl,receive-eq-mdB = <3000>;
-};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts
deleted file mode 100644
index e4132d62ffa2f..0000000000000
--- a/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
- * Based on dt work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-hummingboard.dtsi"
-
-/ {
-	model = "SolidRun HummingBoard Dual/Quad (1.5som)";
-	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-	fsl,transmit-level-mV = <1025>;
-	fsl,transmit-boost-mdB = <3330>;
-	fsl,transmit-atten-16ths = <9>;
-	fsl,receive-eq-mdB = <3000>;
-};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts
deleted file mode 100644
index 8c9e94e648a7b..0000000000000
--- a/arch/arm/boot/dts/imx6q-hummingboard.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
- * Based on dt work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-brcm.dtsi"
-#include "imx6qdl-hummingboard.dtsi"
-
-/ {
-	model = "SolidRun HummingBoard Dual/Quad";
-	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-	fsl,transmit-level-mV = <1025>;
-	fsl,transmit-boost-mdB = <3330>;
-	fsl,transmit-atten-16ths = <9>;
-	fsl,receive-eq-mdB = <3000>;
-};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts
deleted file mode 100644
index 1998ebfa0fe01..0000000000000
--- a/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Device Tree file for SolidRun HummingBoard2
- * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
- * Based on work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-emmc.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-hummingboard2.dtsi"
-
-/ {
-	model = "SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)";
-	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-	fsl,transmit-level-mV = <1104>;
-	fsl,transmit-boost-mdB = <0>;
-	fsl,transmit-atten-16ths = <9>;
-	fsl,no-spread-spectrum;
-};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts
deleted file mode 100644
index d3ad7329cd6da..0000000000000
--- a/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Device Tree file for SolidRun HummingBoard2
- * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
- * Based on work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-hummingboard2.dtsi"
-
-/ {
-	model = "SolidRun HummingBoard2 Dual/Quad (1.5som)";
-	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-	fsl,transmit-level-mV = <1104>;
-	fsl,transmit-boost-mdB = <0>;
-	fsl,transmit-atten-16ths = <9>;
-	fsl,no-spread-spectrum;
-};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2.dts b/arch/arm/boot/dts/imx6q-hummingboard2.dts
deleted file mode 100644
index 5249f53dcdbcf..0000000000000
--- a/arch/arm/boot/dts/imx6q-hummingboard2.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
- * Based on dt work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-brcm.dtsi"
-#include "imx6qdl-hummingboard2.dtsi"
-#include "imx6qdl-hummingboard2-emmc.dtsi"
-
-/ {
-	model = "SolidRun HummingBoard2 Dual/Quad";
-	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-	fsl,transmit-level-mV = <1104>;
-	fsl,transmit-boost-mdB = <0>;
-	fsl,transmit-atten-16ths = <9>;
-	fsl,no-spread-spectrum;
-};
diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts
deleted file mode 100644
index d51745268dbf2..0000000000000
--- a/arch/arm/boot/dts/imx6q-icore-mipi.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright (C) 2017 Engicam S.r.l.
- * Copyright (C) 2017 Amarula Solutions B.V.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-icore-1.5.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 1.5 Quad/Dual MIPI Starter Kit";
-	compatible = "engicam,imx6-icore", "fsl,imx6q";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&mipi_csi {
-	status = "okay";
-};
-
-&ov5640 {
-	status = "okay";
-};
-
-&usdhc3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
deleted file mode 100644
index 02aca1e28ce3f..0000000000000
--- a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-icore.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit";
-	compatible = "engicam,imx6-icore", "fsl,imx6q";
-
-	panel {
-		compatible = "ampire,am-1280800n3tzqw-t00h";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
deleted file mode 100644
index 241811c52b624..0000000000000
--- a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-icore.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
-	compatible = "engicam,imx6-icore", "fsl,imx6q";
-
-	panel {
-		compatible = "koe,tx31d200vm0baa";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		reg = <0>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
deleted file mode 100644
index cf6ba724f4979..0000000000000
--- a/arch/arm/boot/dts/imx6q-icore-rqs.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2015 Amarula Solutions B.V.
- * Copyright (C) 2015 Engicam S.r.l.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-icore-rqs.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
-	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
deleted file mode 100644
index fe28c3cf54c03..0000000000000
--- a/arch/arm/boot/dts/imx6q-icore.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-icore.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
-	compatible = "engicam,imx6-icore", "fsl,imx6q";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&i2c1 {
-	max11801: touchscreen@48 {
-		compatible = "maxim,max11801";
-		reg = <0x48>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <60000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <30>;
-				hfront-porch = <30>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				hsync-len = <64>;
-				vsync-len = <20>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
deleted file mode 100644
index 4d6a0c3e8455f..0000000000000
--- a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
- */
-
-#include "imx6q.dtsi"
-#include "imx6qdl-kontron-samx6i.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Kontron SMARC sAMX6i Quad/Dual";
-	compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
-};
-
-/* Quad/Dual SoMs have 3 chip-select signals */
-&ecspi4 {
-	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>,
-		   <&gpio3 25 GPIO_ACTIVE_LOW>;
-};
-
-&pinctrl_ecspi4 {
-	fsl,pins = <
-		MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-		MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-		MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-
-		/* SPI4_IMX_CS2# - connected to internal flash */
-		MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
-		/* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
-		MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
-		/* SPI4_CS3# - connected to  SMARC SPI0_CS1# */
-		MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
-	>;
-};
diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts b/arch/arm/boot/dts/imx6q-kp-tpc.dts
deleted file mode 100644
index 50fbf46d17c29..0000000000000
--- a/arch/arm/boot/dts/imx6q-kp-tpc.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-
-#include "imx6q-kp.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Qwuad K+P TPC Board";
-	compatible = "kiebackpeter,imx6q-tpc", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi
deleted file mode 100644
index 5e0ed55600405..0000000000000
--- a/arch/arm/boot/dts/imx6q-kp.dtsi
+++ /dev/null
@@ -1,434 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 255>;
-		num-interpolated-steps = <255>;
-		default-brightness-level = <250>;
-	};
-
-	beeper {
-		compatible = "pwm-beeper";
-		pwms = <&pwm2 0 500000>;
-	};
-
-	lcd_display: display {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1>;
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	lcd_panel: lcd-panel {
-		compatible = "auo,g070vvn01";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_display>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-green {
-			label = "led1";
-			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "off";
-		};
-
-		led-red {
-			label = "led0";
-			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "off";
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_audio: regulator-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "sgtl5000-supply";
-		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_display: regulator-display {
-		compatible = "regulator-fixed";
-		regulator-name = "display-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb_h1_vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "imx6q-sgtl5000-audio";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&codec_dai>;
-		simple-audio-card,frame-master = <&codec_dai>;
-
-		cpu_dai: simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		codec_dai: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			IMX_AUDMUX_V2_PTCR_TFSEL(2) |
-			IMX_AUDMUX_V2_PTCR_TCSEL(2) |
-			IMX_AUDMUX_V2_PTCR_TFSDIR |
-			IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
-	};
-
-	aud3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	touchscreen@5d {
-		compatible = "goodix,gt911";
-		reg = <0x5d>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ts>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		irq-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	ds1307: rtc@32 {
-		compatible = "dallas,ds1307";
-		reg = <0x32>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS	0x130b0
-		>;
-	};
-
-	pinctrl_codec: codecgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31   0x1b0b0
-			/* sgtl5000 sys_mclk clock routed to CLKO1 */
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000b0
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO	0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC	0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0	0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1	0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2	0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3	0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC	0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0	0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1	0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2	0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3	0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-		>;
-	};
-
-	pinctrl_flexcan1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX        0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX        0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-		 >;
-	};
-
-	pinctrl_ipu1: ipu1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_ts: tsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
-			MX6QDL_PAD_EIM_D28__UART2_CTS_B         0x1b0b1
-			MX6QDL_PAD_EIM_D29__UART2_RTS_B         0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-		>;
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&wdog1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts
deleted file mode 100644
index 46a4ddedb4236..0000000000000
--- a/arch/arm/boot/dts/imx6q-logicpd.dts
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2019 Logic PD, Inc.
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6-logicpd-som.dtsi"
-#include "imx6-logicpd-baseboard.dtsi"
-
-/ {
-	model = "Logic PD i.MX6QD SOM-M3";
-	compatible = "logicpd,imx6q-logicpd", "fsl,imx6q";
-
-	backlight: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 20000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		power-supply = <&reg_lcd>;
-	};
-
-	panel-lvds0 {
-		compatible = "okaya,rs800480t-7x0gp";
-		power-supply = <&reg_lcd_reset>;
-		backlight = <&backlight>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	reg_lcd: regulator-lcd {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd_reg>;
-		compatible = "regulator-fixed";
-		regulator-name = "lcd_panel_pwr";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_3v3>;
-		startup-delay-us = <500000>;
-	};
-
-	reg_lcd_reset: regulator-lcd-reset {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd_reset>;
-		compatible = "regulator-fixed";
-		regulator-name = "nLCD_RESET";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_lcd>;
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
-			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	touchscreen@26 {
-		compatible = "ilitek,ili2117";
-		reg = <0x26>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreen>;
-		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&reg_hdmi {
-	regulator-always-on;	/* Without this, the level shifter on HDMI doesn't turn on */
-};
-
-&iomuxc {
-	pinctrl_lcd_reg: lcdreg {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x100b0	/* R_LCD_PANEL_PWR */
-		>;
-	};
-
-	pinctrl_lcd_reset: lcdreset {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x100b0	/* LCD_nRESET */
-		>;
-	};
-
-	pinctrl_touchscreen: touchscreengrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0	/* TOUCH_nPINTDAV */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
deleted file mode 100644
index 2c9961333b0a8..0000000000000
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- * Copyright (C) 2016 Sergio Prado (sergio.prado@e-labworks.com)
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Embest MarS Board i.MX6Dual";
-	compatible = "embest,imx6q-marsboard", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led-user1 {
-			label = "imx6:green:user1";
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-user2 {
-			label = "imx6:green:user2";
-			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "microchip,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&rgmii_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Atheros AR8035 PHY */
-		rgmii_phy: ethernet-phy@4 {
-			reg = <4>;
-			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <1000>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0	/* CAM_MCLK */
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000b1	/* CS0 */
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
-			/* AR8035 pin strapping: IO voltage: pull up */
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			/* AR8035 pin strapping: PHYADDR#0: pull down */
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
-			/* AR8035 pin strapping: PHYADDR#1: pull down */
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-			/* AR8035 pin strapping: MODE#1: pull up */
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			/* AR8035 pin strapping: MODE#3: pull up */
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			/* AR8035 pin strapping: MODE#0: pull down */
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-			/* GPIO16 -> AR8035 25MHz */
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			/* RGMII_nRST */
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0
-			/* AR8035 interrupt */
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* LED1 */
-			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* LED2 */
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* USB OTG POWER ENABLE */
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* WP */
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17009
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10009
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17009
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17009
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17009
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17009
-			MX6QDL_PAD_SD3_RST__SD3_RESET		0x17009
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-mba6.dtsi b/arch/arm/boot/dts/imx6q-mba6.dtsi
deleted file mode 100644
index 0d7be45672916..0000000000000
--- a/arch/arm/boot/dts/imx6q-mba6.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * Copyright 2013-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-&ecspi5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi5_mba6x>;
-	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-};
-
-&ethphy {
-	rxdv-skew-ps = <180>;
-	txen-skew-ps = <120>;
-	rxd3-skew-ps = <180>;
-	rxd2-skew-ps = <180>;
-	rxd1-skew-ps = <180>;
-	rxd0-skew-ps = <180>;
-	txd3-skew-ps = <120>;
-	txd2-skew-ps = <0>;
-	txd1-skew-ps = <180>;
-	txd0-skew-ps = <360>;
-	txc-skew-ps = <1860>;
-	rxc-skew-ps = <1860>;
-};
-
-&sata {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_ecspi5_mba6x: ecspi5grp-mba6x {
-		fsl,pins = <
-			/* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
-			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b099
-			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0xb099
-			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0xb099
-			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0xb099 /* eCSPI5 SS0 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-mba6a.dts b/arch/arm/boot/dts/imx6q-mba6a.dts
deleted file mode 100644
index 349a08605a5e8..0000000000000
--- a/arch/arm/boot/dts/imx6q-mba6a.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * Copyright 2013-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/dts-v1/;
-
-#include "imx6q-tqma6a.dtsi"
-#include "imx6qdl-mba6.dtsi"
-#include "imx6qdl-mba6a.dtsi"
-#include "imx6q-mba6.dtsi"
-
-/ {
-	model = "TQ TQMa6Q on MBa6x";
-	compatible = "tq,imx6q-mba6x-a", "tq,mba6a",
-		     "tq,imx6q-tqma6q-a", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-mba6b.dts b/arch/arm/boot/dts/imx6q-mba6b.dts
deleted file mode 100644
index 02c9f3e91b8fb..0000000000000
--- a/arch/arm/boot/dts/imx6q-mba6b.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * Copyright 2013-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/dts-v1/;
-
-#include "imx6q-tqma6b.dtsi"
-#include "imx6qdl-mba6.dtsi"
-#include "imx6qdl-mba6b.dtsi"
-#include "imx6q-mba6.dtsi"
-
-/ {
-	model = "TQ TQMa6Q on MBa6x";
-	compatible = "tq,imx6q-mba6x-b", "tq,mba6b",
-		     "tq,imx6q-tqma6q-b", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
deleted file mode 100644
index f08b370102915..0000000000000
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ /dev/null
@@ -1,471 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2016-2017
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Liebherr (LWN) monitor6 i.MX6 Quad Board";
-	compatible = "lwn,mccmon6", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	backlight_lvds: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm2 0 5000000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
-				      10  11  12  13  14  15  16  17  18  19
-				      20  21  22  23  24  25  26  27  28  29
-				      30  31  32  33  34  35  36  37  38  39
-				      40  41  42  43  44  45  46  47  48  49
-				      50  51  52  53  54  55  56  57  58  59
-				      60  61  62  63  64  65  66  67  68  69
-				      70  71  72  73  74  75  76  77  78  79
-				      80  81  82  83  84  85  86  87  88  89
-				      90  91  92  93  94  95  96  97  98  99
-				     100 101 102 103 104 105 106 107 108 109
-				     110 111 112 113 114 115 116 117 118 119
-				     120 121 122 123 124 125 126 127 128 129
-				     130 131 132 133 134 135 136 137 138 139
-				     140 141 142 143 144 145 146 147 148 149
-				     150 151 152 153 154 155 156 157 158 159
-				     160 161 162 163 164 165 166 167 168 169
-				     170 171 172 173 174 175 176 177 178 179
-				     180 181 182 183 184 185 186 187 188 189
-				     190 191 192 193 194 195 196 197 198 199
-				     200 201 202 203 204 205 206 207 208 209
-				     210 211 212 213 214 215 216 217 218 219
-				     220 221 222 223 224 225 226 227 228 229
-				     230 231 232 233 234 235 236 237 238 239
-				     240 241 242 243 244 245 246 247 248 249
-				     250 251 252 253 254 255>;
-		default-brightness-level = <50>;
-		enable-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_lvds: regulator-lvds {
-		compatible = "regulator-fixed";
-		regulator-name = "lvds_ppen";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_lvds>;
-		gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	panel-lvds0 {
-		compatible = "innolux,g121x1-l03";
-		backlight = <&backlight_lvds>;
-		power-supply = <&reg_lvds>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
-	status = "okay";
-
-	s25sl032p: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <40000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	/delete-property/ interrupts;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pfuze100: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
-	ranges = <0 0 0x08000000 0x08000000>;
-	status = "okay";
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		reg = <0 0 0x02000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		bank-width = <2>;
-		use-advanced-sector-protection;
-		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
-				0x0000c000 0x1404a38e 0x00000000>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	pinctrl_backlight: dispgrp {
-		fsl,pins = <
-			/* BLEN_OUT */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02    0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-		>;
-	};
-
-	pinctrl_ecspi3_cs: ecspi3csgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000
-		>;
-	};
-
-	pinctrl_ecspi3_flwp: ecspi3flwpgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x80000000
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_reg_lvds: reqlvdsgrp {
-		fsl,pins = <
-			/* LVDS_PPEN_OUT */
-			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19         0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04           0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			MX6QDL_PAD_SD3_RST__SD3_RESET		0x17059
-		>;
-	};
-
-	pinctrl_weim_cs0: weimcs0grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
-		>;
-	};
-
-	pinctrl_weim_nor: weimnorgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
-			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
-			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B	0xb060
-			MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
-			MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
-			MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
-			MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
-			MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
-			MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
-			MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
-			MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
-			MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
-			MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
-			MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
-			MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
-			MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
-			MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
-			MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
-			MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
-			MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
-			MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
-			MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
-			MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
-			MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
-			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
-			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
-			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
-			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
-			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
-			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
-			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
-			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
-			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
-			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
-			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
-			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
-			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
-			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
-			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
-			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
-			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
-			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
-			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
deleted file mode 100644
index 03bec0c530637..0000000000000
--- a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2015 Boundary Devices, Inc.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-nitrogen6_max.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board";
-	compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
deleted file mode 100644
index eb4eecb6ed221..0000000000000
--- a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2016 Boundary Devices, Inc.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-nitrogen6_som2.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 Quad Nitrogen6_SOM2 Board";
-	compatible = "boundary,imx6q-nitrogen6_som2", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
deleted file mode 100644
index 435445a34ad02..0000000000000
--- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2013 Boundary Devices, Inc.
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-nitrogen6x.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 Quad Nitrogen6x Board";
-	compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
deleted file mode 100644
index ee8c0bd3ecfd5..0000000000000
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ /dev/null
@@ -1,803 +0,0 @@
-/*
- * Copyright 2015 Sutajio Ko-Usagi PTE LTD
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Kosagi Novena Dual/Quad";
-	compatible = "kosagi,imx6q-novena", "fsl,imx6q";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 10000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight_novena>;
-		power-supply = <&reg_lvds_lcd>;
-		brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>;
-		default-brightness-level = <12>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys_novena>;
-
-		user-button {
-			label = "User Button";
-			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-
-		lid-event {
-			label = "Lid";
-			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
-			linux,input-type = <5>;	/* EV_SW */
-			linux,code = <0>;	/* SW_LID */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds_novena>;
-
-		led-heartbeat {
-			label = "novena:white:panel";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	panel: panel {
-		compatible = "innolux,n133hse-ea1";
-		backlight = <&backlight>;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_audio_codec: regulator-audio-codec {
-		compatible = "regulator-fixed";
-		regulator-name = "es8328-power";
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		startup-delay-us = <400000>;
-		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_display: regulator-display {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-display-power";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-		gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lvds_lcd: regulator-lvds-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-lvds-power";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_pcie: regulator-pcie {
-		compatible = "regulator-fixed";
-		regulator-name = "pcie-bus-power";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_sata: regulator-sata {
-		compatible = "regulator-fixed";
-		regulator-name = "sata-power";
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <10000>;
-		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-es8328";
-		model = "imx-audio-es8328";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-amp-supply = <&reg_audio_codec>;
-		jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>;
-		audio-routing =
-			"Speaker", "LOUT2",
-			"Speaker", "ROUT2",
-			"Speaker", "audio-amp",
-			"Headphone", "ROUT1",
-			"Headphone", "LOUT1",
-			"LINPUT1", "Mic Jack",
-			"RINPUT1", "Mic Jack",
-			"Mic Jack", "Mic Bias";
-		mux-int-port = <0x1>;
-		mux-ext-port = <0x3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_novena>;
-	status = "okay";
-};
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3_novena>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_novena>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			rxc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			txen-skew-ps = <0>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <3000>;
-			txd1-skew-ps = <3000>;
-			txd2-skew-ps = <3000>;
-			txd3-skew-ps = <3000>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_novena>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_novena>;
-	status = "okay";
-
-	accel: mma8452@1c {
-		compatible = "fsl,mma8452";
-		reg = <0x1c>;
-	};
-
-	rtc: pcf8523@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	sbs_battery: bq20z75@b {
-		compatible = "sbs,sbs-battery";
-		reg = <0x0b>;
-		sbs,i2c-retry-count = <50>;
-	};
-
-	touch: stmpe811@44 {
-		compatible = "st,stmpe811";
-		reg = <0x44>;
-		irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
-		id = <0>;
-		blocks = <0x5>;
-		irq-trigger = <0x1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_stmpe_novena>;
-		vio-supply = <&reg_3p3v>;
-		vcc-supply = <&reg_3p3v>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			st,sample-time = <4>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,adc-freq = <1>;
-			st,ave-ctrl = <1>;
-			st,touch-det-delay = <2>;
-			st,settling = <2>;
-			st,fraction-z = <7>;
-			st,i-drive = <1>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_novena>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			reg_sw1a: sw1a {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			reg_sw1c: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_sw2: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_sw3a: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_sw3b: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_sw4: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			reg_swbst: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
-			};
-
-			reg_snvs: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vref: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vgen1: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			reg_vgen2: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			reg_vgen3: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			reg_vgen4: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen5: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen6: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3_novena>;
-	status = "okay";
-
-	codec: es8328@11 {
-		compatible = "everest,es8328";
-		reg = <0x11>;
-		DVDD-supply = <&reg_audio_codec>;
-		AVDD-supply = <&reg_audio_codec>;
-		PVDD-supply = <&reg_audio_codec>;
-		HPVDD-supply = <&reg_audio_codec>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sound_novena>;
-		clocks = <&clks IMX6QDL_CLK_CKO1>;
-		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
-				  <&clks IMX6QDL_CLK_CKO1_SEL>,
-				  <&clks IMX6QDL_CLK_PLL4_AUDIO>,
-				  <&clks IMX6QDL_CLK_CKO1>;
-		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>,
-					 <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>,
-					 <&clks IMX6QDL_CLK_OSC>,
-					 <&clks IMX6QDL_CLK_CKO1_PODF>;
-		assigned-clock-rates = <0 0 722534400 22579200>;
-	};
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp_novena>;
-	linux,keymap = <
-		MATRIX_KEY(1, 1, KEY_CONFIG)
-	>;
-	status = "okay";
-};
-
-&ldb {
-	fsl,dual-channel;
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "jeida";
-		fsl,data-width = <24>;
-		fsl,panel = <&panel>;
-		status = "okay";
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie_novena>;
-	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie>;
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	status = "okay";
-};
-
-&sata {
-	target-supply = <&reg_sata>;
-	fsl,transmit-level-mV = <1025>;
-	fsl,transmit-boost-mdB = <0>;
-	fsl,transmit-atten-16ths = <8>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_novena>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_novena>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4_novena>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	dr_mode = "otg";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_novena>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_swbst>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2_novena>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_novena>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_audmux_novena: audmuxgrp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-		>;
-	};
-
-	pinctrl_backlight_novena: backlightgrp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b1
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b1
-		>;
-	};
-
-	pinctrl_ecspi3_novena: ecspi3grp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-		>;
-	};
-
-	pinctrl_enet_novena: enetgrp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b028
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b028
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b028
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b028
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b028
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			/* Ethernet reset */
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b1
-		>;
-	};
-
-	pinctrl_fpga_gpio: fpgagpiogrp-novena {
-		fsl,pins = <
-			/* FPGA power */
-			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
-			/* Reset */
-			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
-			/* FPGA GPIOs */
-			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1
-			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1
-			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1
-			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1
-			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1
-			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1
-			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1
-			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1
-			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1
-			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1
-			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1
-			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1
-			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1
-			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1
-			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1
-			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1
-			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1
-			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1
-			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1
-			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1
-		>;
-	};
-
-	pinctrl_fpga_eim: fpgaeimgrp-novena {
-		fsl,pins = <
-			/* FPGA power */
-			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
-			/* Reset */
-			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
-			/* FPGA GPIOs */
-			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0f1
-			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0f1
-			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0f1
-			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0f1
-			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0f1
-			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0f1
-			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0f1
-			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0f1
-			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0f1
-			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0f1
-			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0f1
-			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0f1
-			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0f1
-			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0f1
-			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0f1
-			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0f1
-			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0f1
-			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0f1
-			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0f1
-			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0f1
-			MX6QDL_PAD_EIM_CS1__EIM_CS1_B		0xb0f1
-			MX6QDL_PAD_EIM_LBA__EIM_LBA_B		0xb0f1
-			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0f1
-			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0f1
-			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb0f1
-			MX6QDL_PAD_EIM_BCLK__EIM_BCLK		0xb0f1
-		>;
-	};
-
-	pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
-		fsl,pins = <
-			/* User button */
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
-			/* PCIe Wakeup */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1f0e0
-			/* Lid switch */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0
-		>;
-	};
-
-	pinctrl_hdmi_novena: hdmigrp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
-			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1
-		>;
-	};
-
-	pinctrl_i2c1_novena: i2c1grp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2_novena: i2c2grp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3_novena: i2c3grp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_kpp_novena: kppgrp-novena {
-		fsl,pins = <
-			/* Front panel button */
-			MX6QDL_PAD_KEY_ROW1__KEY_ROW1		0x1b0b1
-			/* Fake column driver, not connected */
-			MX6QDL_PAD_KEY_COL1__KEY_COL1		0x1b0b1
-		>;
-	};
-
-	pinctrl_leds_novena: ledsgrp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21		0x1b0b1
-		>;
-	};
-
-	pinctrl_pcie_novena: pciegrp-novena {
-		fsl,pins = <
-			/* Reset */
-			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1
-			/* Power On */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1
-			/* Wifi kill */
-			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1
-		>;
-	};
-
-	pinctrl_sata_novena: satagrp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b1
-		>;
-	};
-
-	pinctrl_senoko_novena: senokogrp-novena {
-		fsl,pins = <
-			/* Senoko IRQ line */
-			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x13048
-			/* Senoko reset line */
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1
-		>;
-	};
-
-	pinctrl_sound_novena: soundgrp-novena {
-		fsl,pins = <
-			/* Audio power regulator */
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
-			/* Headphone plug */
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
-		>;
-	};
-
-	pinctrl_stmpe_novena: stmpegrp-novena {
-		fsl,pins = <
-			/* Touchscreen interrupt */
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2_novena: uart2grp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3_novena: uart3grp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4_novena: uart4grp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg_novena: usbotggrp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_novena: usdhc2grp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-			/* Write protect */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
-			/* Card detect */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc3_novena: usdhc3grp-novena {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
deleted file mode 100644
index 322f071d972f6..0000000000000
--- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 PHYTEC Messtechnik GmbH
- * Author: Christian Hemp <c.hemp@phytec.de>
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-phytec-phycore-som.dtsi"
-#include "imx6qdl-phytec-mira.dtsi"
-#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
-#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
-#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
-
-/ {
-	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC";
-	compatible = "phytec,imx6q-pbac06-emmc", "phytec,imx6q-pbac06",
-		     "phytec,imx6qdl-pcm058", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
-&can1 {
-	status = "okay";
-};
-
-&fec {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c_rtc {
-	status = "okay";
-};
-
-&m25p80 {
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
-
-&usdhc1 {
-	status = "okay";
-};
-
-&usdhc4 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
deleted file mode 100644
index 3f13726c80586..0000000000000
--- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 PHYTEC Messtechnik GmbH
- * Author: Christian Hemp <c.hemp@phytec.de>
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-phytec-phycore-som.dtsi"
-#include "imx6qdl-phytec-mira.dtsi"
-#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
-#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
-#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
-
-/ {
-	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
-	compatible = "phytec,imx6q-pbac06-nand", "phytec,imx6q-pbac06",
-		     "phytec,imx6qdl-pcm058", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
-&can1 {
-	status = "okay";
-};
-
-&fec {
-	status = "okay";
-};
-
-&gpmi {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c_rtc {
-	status = "okay";
-};
-
-&m25p80 {
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
-
-&usdhc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
deleted file mode 100644
index affe30b02d5af..0000000000000
--- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- */
-
-/dts-v1/;
-#include "imx6q-phytec-pfla02.dtsi"
-#include "imx6qdl-phytec-pbab01.dtsi"
-
-/ {
-	model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board";
-	compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
deleted file mode 100644
index 500944bd2a05c..0000000000000
--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- */
-
-#include "imx6q.dtsi"
-#include "imx6qdl-phytec-pfla02.dtsi"
-
-/ {
-	model = "Phytec phyFLEX-i.MX6 Quad";
-	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-pico-dwarf.dts b/arch/arm/boot/dts/imx6q-pico-dwarf.dts
deleted file mode 100644
index 479a63ed42af0..0000000000000
--- a/arch/arm/boot/dts/imx6q-pico-dwarf.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2018 Technexion Ltd.
-//
-// Author: Wig Cheng <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-pico-pi.dtsi"
-
-/ {
-	model = "TechNexion PICO-IMX6 Quad Board and Dwarf baseboard";
-	compatible = "technexion,imx6q-pico-dwarf", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-pico-hobbit.dts b/arch/arm/boot/dts/imx6q-pico-hobbit.dts
deleted file mode 100644
index b767131068f58..0000000000000
--- a/arch/arm/boot/dts/imx6q-pico-hobbit.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2018 Technexion Ltd.
-//
-// Author: Wig Cheng <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-pico-hobbit.dtsi"
-
-/ {
-	model = "TechNexion PICO-IMX6 Quad Board and Hobbit baseboard";
-	compatible = "technexion,imx6q-pico-hobbit", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-pico-nymph.dts b/arch/arm/boot/dts/imx6q-pico-nymph.dts
deleted file mode 100644
index e8ad4c12b263c..0000000000000
--- a/arch/arm/boot/dts/imx6q-pico-nymph.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2018 Technexion Ltd.
-//
-// Author: Wig Cheng <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-pico-pi.dtsi"
-
-/ {
-	model = "TechNexion PICO-IMX6 Quad Board and Nymph baseboard";
-	compatible = "technexion,imx6q-pico-nymph", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-pico-pi.dts b/arch/arm/boot/dts/imx6q-pico-pi.dts
deleted file mode 100644
index cc2394ddad6cc..0000000000000
--- a/arch/arm/boot/dts/imx6q-pico-pi.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2018 Technexion Ltd.
-//
-// Author: Wig Cheng <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-pico-pi.dtsi"
-
-/ {
-	model = "TechNexion PICO-IMX6 Quad Board and PI baseboard";
-	compatible = "technexion,imx6q-pico-pi", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h
deleted file mode 100644
index e40409d04b974..0000000000000
--- a/arch/arm/boot/dts/imx6q-pinfunc.h
+++ /dev/null
@@ -1,1044 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DTS_IMX6Q_PINFUNC_H
-#define __DTS_IMX6Q_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x04c 0x360 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0             0x04c 0x360 0x834 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x04c 0x360 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x04c 0x360 0x7c8 0x3 0x0
-#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x04c 0x360 0x8f0 0x4 0x0
-#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x04c 0x360 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x050 0x364 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1             0x050 0x364 0x838 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x050 0x364 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x050 0x364 0x7b8 0x3 0x0
-#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x050 0x364 0x8f8 0x4 0x0
-#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x050 0x364 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x054 0x368 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO            0x054 0x368 0x82c 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x054 0x368 0x7b4 0x3 0x0
-#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x054 0x368 0x8fc 0x4 0x0
-#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x054 0x368 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x054 0x368 0x000 0x6 0x0
-#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x058 0x36c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x058 0x36c 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x058 0x36c 0x918 0x2 0x0
-#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x058 0x36c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x058 0x36c 0x000 0x7 0x0
-#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x05c 0x370 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x05c 0x370 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x05c 0x370 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x060 0x374 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x060 0x374 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x060 0x374 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x064 0x378 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x064 0x378 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x064 0x378 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x068 0x37c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x068 0x37c 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x068 0x37c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x06c 0x380 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x06c 0x380 0x858 0x1 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x06c 0x380 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x070 0x384 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x070 0x384 0x848 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x070 0x384 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x074 0x388 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x074 0x388 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x074 0x388 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x074 0x388 0x83c 0x7 0x0
-#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x078 0x38c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x078 0x38c 0x84c 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x078 0x38c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x07c 0x390 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x07c 0x390 0x850 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x07c 0x390 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x080 0x394 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x080 0x394 0x854 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x080 0x394 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x084 0x398 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x084 0x398 0x844 0x1 0x0
-#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x084 0x398 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x088 0x39c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x088 0x39c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x088 0x39c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x088 0x39c 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x088 0x39c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x088 0x39c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x088 0x39c 0x88c 0x6 0x0
-#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x08c 0x3a0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x08c 0x3a0 0x800 0x1 0x0
-#define MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19        0x08c 0x3a0 0x8d4 0x3 0x0
-#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x08c 0x3a0 0x890 0x4 0x0
-#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x08c 0x3a0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x08c 0x3a0 0x8a0 0x6 0x0
-#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x08c 0x3a0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x090 0x3a4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x090 0x3a4 0x7f4 0x1 0x0
-#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x090 0x3a4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18        0x090 0x3a4 0x8d0 0x3 0x0
-#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x090 0x3a4 0x894 0x4 0x0
-#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x090 0x3a4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x090 0x3a4 0x8a4 0x6 0x0
-#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x094 0x3a8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x094 0x3a8 0x7f8 0x1 0x0
-#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x094 0x3a8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D17__IPU2_CSI1_PIXCLK        0x094 0x3a8 0x8e0 0x3 0x0
-#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x094 0x3a8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x094 0x3a8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x094 0x3a8 0x8a8 0x6 0x0
-#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x098 0x3ac 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x098 0x3ac 0x7fc 0x1 0x0
-#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x098 0x3ac 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17        0x098 0x3ac 0x8cc 0x3 0x0
-#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x098 0x3ac 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x098 0x3ac 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x098 0x3ac 0x8ac 0x6 0x0
-#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x09c 0x3b0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x09c 0x3b0 0x804 0x1 0x0
-#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x09c 0x3b0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16        0x09c 0x3b0 0x8c8 0x3 0x0
-#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x09c 0x3b0 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x09c 0x3b0 0x91c 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x09c 0x3b0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x09c 0x3b0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x0a0 0x3b4 0x824 0x1 0x0
-#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15        0x0a0 0x3b4 0x8c4 0x3 0x0
-#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x0a0 0x3b4 0x91c 0x4 0x1
-#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x0a0 0x3b4 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x0a0 0x3b4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x0a4 0x3b8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D21__IPU2_CSI1_DATA11        0x0a4 0x3b8 0x8b4 0x3 0x0
-#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x0a4 0x3b8 0x944 0x4 0x0
-#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x0a4 0x3b8 0x898 0x6 0x0
-#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x0a4 0x3b8 0x914 0x7 0x0
-#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D22__IPU2_CSI1_DATA10        0x0a8 0x3bc 0x8b0 0x3 0x0
-#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x0a8 0x3bc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x0a8 0x3bc 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x0ac 0x3c0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x0ac 0x3c0 0x92c 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x0ac 0x3c0 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D23__IPU2_CSI1_DATA_EN       0x0ac 0x3c0 0x8d8 0x4 0x0
-#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x0ac 0x3c0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x0ac 0x3c0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x0b0 0x3c4 0x92c 0x2 0x1
-#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x0b0 0x3c4 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC         0x0b0 0x3c4 0x8dc 0x4 0x0
-#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x0b0 0x3c4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x0b0 0x3c4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x0b4 0x3c8 0x930 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x0b4 0x3c8 0x808 0x3 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x0b4 0x3c8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x0b4 0x3c8 0x7d8 0x6 0x0
-#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x0b4 0x3c8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x0b8 0x3cc 0x930 0x2 0x1
-#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x0b8 0x3cc 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x0b8 0x3cc 0x80c 0x3 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x0b8 0x3cc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x0b8 0x3cc 0x7d4 0x6 0x0
-#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x0b8 0x3cc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x0bc 0x3d0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14        0x0bc 0x3d0 0x8c0 0x3 0x0
-#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x0bc 0x3d0 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x0bc 0x3d0 0x928 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x0bc 0x3d0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x0bc 0x3d0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x0c0 0x3d4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13        0x0c0 0x3d4 0x8bc 0x3 0x0
-#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x0c0 0x3d4 0x928 0x4 0x1
-#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x0c0 0x3d4 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x0c0 0x3d4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x0c0 0x3d4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x0c4 0x3d8 0x89c 0x1 0x0
-#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x0c4 0x3d8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D28__IPU2_CSI1_DATA12        0x0c4 0x3d8 0x8b8 0x3 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x0c4 0x3d8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x0c4 0x3d8 0x924 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x0c4 0x3d8 0x924 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x0c4 0x3d8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x0c4 0x3d8 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x0c4 0x3d8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x0c8 0x3dc 0x824 0x2 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x0c8 0x3dc 0x924 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x0c8 0x3dc 0x924 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC         0x0c8 0x3dc 0x8e4 0x6 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x0c8 0x3dc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x0cc 0x3e0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x0cc 0x3e0 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x0cc 0x3e0 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x0cc 0x3e0 0x92c 0x4 0x2
-#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x0cc 0x3e0 0x948 0x6 0x0
-#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x0d0 0x3e4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x0d0 0x3e4 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x0d0 0x3e4 0x92c 0x4 0x3
-#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x0d0 0x3e4 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x0d0 0x3e4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A24__IPU2_CSI1_DATA19        0x0d4 0x3e8 0x8d4 0x2 0x1
-#define MX6QDL_PAD_EIM_A24__IPU2_SISG2              0x0d4 0x3e8 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x0d4 0x3e8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x0d4 0x3e8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A23__IPU2_CSI1_DATA18        0x0d8 0x3ec 0x8d0 0x2 0x1
-#define MX6QDL_PAD_EIM_A23__IPU2_SISG3              0x0d8 0x3ec 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x0d8 0x3ec 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A22__IPU2_CSI1_DATA17        0x0dc 0x3f0 0x8cc 0x2 0x1
-#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A21__IPU2_CSI1_DATA16        0x0e0 0x3f4 0x8c8 0x2 0x1
-#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x0e0 0x3f4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A20__IPU2_CSI1_DATA15        0x0e4 0x3f8 0x8c4 0x2 0x1
-#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x0e4 0x3f8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A19__IPU2_CSI1_DATA14        0x0e8 0x3fc 0x8c0 0x2 0x1
-#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x0e8 0x3fc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x0ec 0x400 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x0ec 0x400 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A18__IPU2_CSI1_DATA13        0x0ec 0x400 0x8bc 0x2 0x1
-#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x0ec 0x400 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x0ec 0x400 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x0f0 0x404 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x0f0 0x404 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12        0x0f0 0x404 0x8b8 0x2 0x1
-#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x0f0 0x404 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x0f0 0x404 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x0f4 0x408 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x0f4 0x408 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK        0x0f4 0x408 0x8e0 0x2 0x1
-#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x0f4 0x408 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x0f4 0x408 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x0f8 0x40c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x0f8 0x40c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x0f8 0x40c 0x810 0x2 0x0
-#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x0f8 0x40c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x0fc 0x410 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x0fc 0x410 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x0fc 0x410 0x818 0x2 0x0
-#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x0fc 0x410 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x100 0x414 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x100 0x414 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x100 0x414 0x814 0x2 0x0
-#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x100 0x414 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x104 0x418 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x104 0x418 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x104 0x418 0x81c 0x2 0x0
-#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x104 0x418 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x104 0x418 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x108 0x41c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x108 0x41c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x108 0x41c 0x820 0x2 0x0
-#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x108 0x41c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x108 0x41c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x10c 0x420 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x10c 0x420 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU2_CSI1_DATA11        0x10c 0x420 0x8b4 0x2 0x1
-#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x10c 0x420 0x7f0 0x4 0x0
-#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x10c 0x420 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x10c 0x420 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x110 0x424 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x110 0x424 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU2_CSI1_DATA10        0x110 0x424 0x8b0 0x2 0x1
-#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x110 0x424 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x110 0x424 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x114 0x428 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x114 0x428 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU2_CSI1_DATA09        0x114 0x428 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x114 0x428 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x114 0x428 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x118 0x42c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x118 0x42c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU2_CSI1_DATA08        0x118 0x42c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x118 0x42c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x118 0x42c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x11c 0x430 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x11c 0x430 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU2_CSI1_DATA07        0x11c 0x430 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x11c 0x430 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x11c 0x430 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x120 0x434 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x120 0x434 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU2_CSI1_DATA06        0x120 0x434 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x120 0x434 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x120 0x434 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x124 0x438 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x124 0x438 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU2_CSI1_DATA05        0x124 0x438 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x124 0x438 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x124 0x438 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x128 0x43c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x128 0x43c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU2_CSI1_DATA04        0x128 0x43c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x128 0x43c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x128 0x43c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x12c 0x440 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x12c 0x440 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU2_CSI1_DATA03        0x12c 0x440 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x12c 0x440 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x12c 0x440 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x130 0x444 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x130 0x444 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU2_CSI1_DATA02        0x130 0x444 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x130 0x444 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x130 0x444 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x134 0x448 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x134 0x448 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU2_CSI1_DATA01        0x134 0x448 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x134 0x448 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x134 0x448 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x138 0x44c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x138 0x44c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU2_CSI1_DATA00        0x138 0x44c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x138 0x44c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x138 0x44c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x13c 0x450 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x13c 0x450 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU2_CSI1_DATA_EN      0x13c 0x450 0x8d8 0x2 0x1
-#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x13c 0x450 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x13c 0x450 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x140 0x454 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x140 0x454 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU2_CSI1_HSYNC        0x140 0x454 0x8dc 0x2 0x1
-#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x140 0x454 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x140 0x454 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x144 0x458 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x144 0x458 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU2_CSI1_VSYNC        0x144 0x458 0x8e4 0x2 0x1
-#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x144 0x458 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x144 0x458 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x148 0x45c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x148 0x45c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x148 0x45c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x148 0x45c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x14c 0x460 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x14c 0x460 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x14c 0x460 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x14c 0x460 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x150 0x464 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x150 0x464 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x150 0x464 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x150 0x464 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x150 0x464 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x154 0x468 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x154 0x468 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x154 0x468 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x154 0x468 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x158 0x46c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x158 0x46c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x158 0x46c 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x15c 0x470 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK  0x15c 0x470 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x15c 0x470 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x160 0x474 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15        0x160 0x474 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x160 0x474 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x160 0x474 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x164 0x478 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02         0x164 0x478 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x164 0x478 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x164 0x478 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x168 0x47c 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03         0x168 0x47c 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x168 0x47c 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x168 0x47c 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x16c 0x480 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04         0x16c 0x480 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x16c 0x480 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x16c 0x480 0x94c 0x3 0x0
-#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x16c 0x480 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x170 0x484 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00    0x170 0x484 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x170 0x484 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x170 0x484 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x174 0x488 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01    0x174 0x488 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x174 0x488 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x174 0x488 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x178 0x48c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02    0x178 0x48c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x178 0x48c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x178 0x48c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x17c 0x490 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03    0x17c 0x490 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x17c 0x490 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x17c 0x490 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x180 0x494 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04    0x180 0x494 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x180 0x494 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x180 0x494 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x184 0x498 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05    0x184 0x498 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x184 0x498 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x184 0x498 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x184 0x498 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x188 0x49c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06    0x188 0x49c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x188 0x49c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x188 0x49c 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x188 0x49c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x18c 0x4a0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07    0x18c 0x4a0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x18c 0x4a0 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x18c 0x4a0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x190 0x4a4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08    0x190 0x4a4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x190 0x4a4 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x190 0x4a4 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x190 0x4a4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x194 0x4a8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09    0x194 0x4a8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x194 0x4a8 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x194 0x4a8 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x194 0x4a8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x198 0x4ac 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10   0x198 0x4ac 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x198 0x4ac 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x19c 0x4b0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11   0x19c 0x4b0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x19c 0x4b0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x1a0 0x4b4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12   0x1a0 0x4b4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x1a0 0x4b4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x1a4 0x4b8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13   0x1a4 0x4b8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x1a4 0x4b8 0x7d8 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x1a4 0x4b8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x1a8 0x4bc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14   0x1a8 0x4bc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x1a8 0x4bc 0x7d4 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x1a8 0x4bc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x1ac 0x4c0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15   0x1ac 0x4c0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x1ac 0x4c0 0x804 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x1ac 0x4c0 0x820 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x1ac 0x4c0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x1b0 0x4c4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16   0x1b0 0x4c4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x1b0 0x4c4 0x818 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x1b0 0x4c4 0x7dc 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x1b0 0x4c4 0x90c 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x1b0 0x4c4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x1b4 0x4c8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17   0x1b4 0x4c8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x1b4 0x4c8 0x814 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x1b4 0x4c8 0x7d0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x1b4 0x4c8 0x910 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x1b4 0x4c8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x1b8 0x4cc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18   0x1b8 0x4cc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x1b8 0x4cc 0x81c 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x1b8 0x4cc 0x7e0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x1b8 0x4cc 0x7c0 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x1b8 0x4cc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x1b8 0x4cc 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x1bc 0x4d0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19   0x1bc 0x4d0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x1bc 0x4d0 0x810 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x1bc 0x4d0 0x7cc 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x1bc 0x4d0 0x7bc 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x1bc 0x4d0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x1bc 0x4d0 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x1c0 0x4d4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20   0x1c0 0x4d4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x1c0 0x4d4 0x7f4 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x1c0 0x4d4 0x7c4 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x1c0 0x4d4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x1c4 0x4d8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21   0x1c4 0x4d8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x1c4 0x4d8 0x7fc 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x1c4 0x4d8 0x7b8 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x1c4 0x4d8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x1c8 0x4dc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22   0x1c8 0x4dc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x1c8 0x4dc 0x7f8 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x1c8 0x4dc 0x7c8 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x1c8 0x4dc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x1cc 0x4e0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23   0x1cc 0x4e0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x1cc 0x4e0 0x800 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x1cc 0x4e0 0x7b4 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x1cc 0x4e0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1d0 0x4e4 0x840 0x1 0x0
-#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1d0 0x4e4 0x86c 0x2 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1d0 0x4e4 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1d0 0x4e4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1d0 0x4e4 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1d4 0x4e8 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1d4 0x4e8 0x85c 0x2 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1d4 0x4e8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1d4 0x4e8 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x004 0x0 0xff0d0100
-#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1d8 0x4ec 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1d8 0x4ec 0x864 0x2 0x0
-#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1d8 0x4ec 0x914 0x3 0x1
-#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1d8 0x4ec 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1dc 0x4f0 0x858 0x1 0x1
-#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1dc 0x4f0 0x870 0x2 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1dc 0x4f0 0x918 0x3 0x1
-#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1dc 0x4f0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1e0 0x4f4 0x908 0x0 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1e0 0x4f4 0x84c 0x1 0x1
-#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1e0 0x4f4 0x860 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1e0 0x4f4 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1e0 0x4f4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT        0x1e4 0x4f8 0x000 0x0 0x0
-#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1e4 0x4f8 0x848 0x1 0x1
-#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1e4 0x4f8 0x868 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1e4 0x4f8 0x000 0x3 0x0
-#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1e4 0x4f8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x1e8 0x4fc 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x1e8 0x4fc 0x880 0x2 0x0
-#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x1e8 0x4fc 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x1ec 0x500 0x900 0x0 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x1ec 0x500 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x1ec 0x500 0x87c 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x1ec 0x500 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x1ec 0x500 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x1f0 0x504 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x1f0 0x504 0x884 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x1f0 0x504 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1f4 0x508 0x904 0x0 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1f4 0x508 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1f4 0x508 0x888 0x2 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1f4 0x508 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1f4 0x508 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x1f8 0x5c8 0x7f4 0x0 0x2
-#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x1f8 0x5c8 0x854 0x1 0x1
-#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x1f8 0x5c8 0x7dc 0x2 0x1
-#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x1f8 0x5c8 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x1f8 0x5c8 0x938 0x4 0x0
-#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x1f8 0x5c8 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x1fc 0x5cc 0x7fc 0x0 0x2
-#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x1fc 0x5cc 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x1fc 0x5cc 0x7d0 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x1fc 0x5cc 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x1fc 0x5cc 0x938 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x1fc 0x5cc 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x200 0x5d0 0x7f8 0x0 0x2
-#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x200 0x5d0 0x840 0x1 0x1
-#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x200 0x5d0 0x7e0 0x2 0x1
-#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x200 0x5d0 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x200 0x5d0 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x200 0x5d0 0x940 0x4 0x0
-#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x200 0x5d0 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x200 0x5d0 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x204 0x5d4 0x800 0x0 0x2
-#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x204 0x5d4 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x204 0x5d4 0x7cc 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x204 0x5d4 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x204 0x5d4 0x940 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x204 0x5d4 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x204 0x5d4 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x204 0x5d4 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x208 0x5d8 0x804 0x0 0x2
-#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x208 0x5d8 0x850 0x1 0x1
-#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x208 0x5d8 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x208 0x5d8 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x208 0x5d8 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x208 0x5d8 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x208 0x5d8 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x20c 0x5dc 0x808 0x0 0x1
-#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x20c 0x5dc 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x20c 0x5dc 0x7e4 0x2 0x0
-#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x20c 0x5dc 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x20c 0x5dc 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x20c 0x5dc 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x20c 0x5dc 0x88c 0x6 0x1
-#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x210 0x5e0 0x80c 0x0 0x1
-#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x210 0x5e0 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x210 0x5e0 0x890 0x2 0x1
-#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x210 0x5e0 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x210 0x5e0 0x8a0 0x4 0x1
-#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x210 0x5e0 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x210 0x5e0 0x914 0x6 0x2
-#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x214 0x5e4 0x7b0 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x214 0x5e4 0x894 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x214 0x5e4 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x214 0x5e4 0x8a4 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x214 0x5e4 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x214 0x5e4 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x218 0x5e8 0x000 0x0 0x0
-#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x218 0x5e8 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x218 0x5e8 0x944 0x2 0x1
-#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x218 0x5e8 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x218 0x5e8 0x93c 0x4 0x0
-#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x218 0x5e8 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x218 0x5e8 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x21c 0x5ec 0x7e8 0x0 0x0
-#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x21c 0x5ec 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x21c 0x5ec 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x21c 0x5ec 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x21c 0x5ec 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x21c 0x5ec 0x93c 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x21c 0x5ec 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x220 0x5f0 0x000 0x0 0x0
-#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x220 0x5f0 0x8e8 0x2 0x0
-#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x220 0x5f0 0x7b0 0x3 0x1
-#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x220 0x5f0 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x220 0x5f0 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x220 0x5f0 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x220 0x5f0 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x224 0x5f4 0x86c 0x0 0x1
-#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x224 0x5f4 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x224 0x5f4 0x8f4 0x2 0x0
-#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x004 0x3 0xff0d0101
-#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x224 0x5f4 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x224 0x5f4 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x224 0x5f4 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x228 0x5f8 0x85c 0x0 0x1
-#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x228 0x5f8 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x228 0x5f8 0x8ec 0x2 0x0
-#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x228 0x5f8 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x228 0x5f8 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x228 0x5f8 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x228 0x5f8 0x94c 0x6 0x1
-#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x22c 0x5fc 0x864 0x0 0x1
-#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x22c 0x5fc 0x8a8 0x2 0x1
-#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x22c 0x5fc 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x22c 0x5fc 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x22c 0x5fc 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x22c 0x5fc 0x948 0x6 0x1
-#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x22c 0x5fc 0x900 0x7 0x1
-#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x230 0x600 0x870 0x0 0x1
-#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x230 0x600 0x03c 0x11 0xff000609
-#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x230 0x600 0x8ac 0x2 0x1
-#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x230 0x600 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x230 0x600 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x230 0x600 0x908 0x7 0x1
-#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x234 0x604 0x860 0x0 0x1
-#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x234 0x604 0x8f8 0x2 0x1
-#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x234 0x604 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x234 0x604 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x234 0x604 0x904 0x7 0x1
-#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x238 0x608 0x868 0x0 0x1
-#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x238 0x608 0x8f0 0x2 0x1
-#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x238 0x608 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x238 0x608 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x23c 0x60c 0x87c 0x0 0x1
-#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x23c 0x60c 0x8fc 0x2 0x1
-#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x23c 0x60c 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x23c 0x60c 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x23c 0x60c 0x8a8 0x6 0x2
-#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x23c 0x60c 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x240 0x610 0x884 0x0 0x1
-#define MX6QDL_PAD_GPIO_7__ECSPI5_RDY               0x240 0x610 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x240 0x610 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x240 0x610 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x240 0x610 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x240 0x610 0x928 0x4 0x2
-#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x240 0x610 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x240 0x610 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x240 0x610 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x244 0x614 0x888 0x0 0x1
-#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x244 0x614 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x244 0x614 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x244 0x614 0x7e4 0x3 0x1
-#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x244 0x614 0x928 0x4 0x3
-#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x244 0x614 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x244 0x614 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x244 0x614 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x244 0x614 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x248 0x618 0x880 0x0 0x1
-#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x248 0x618 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x248 0x618 0x83c 0x2 0x1
-#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x248 0x618 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x248 0x618 0x914 0x4 0x3
-#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x248 0x618 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x248 0x618 0x8ac 0x6 0x2
-#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x248 0x618 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x24c 0x61c 0x874 0x0 0x0
-#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x24c 0x61c 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x24c 0x61c 0x7f0 0x2 0x1
-#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x24c 0x61c 0x90c 0x3 0x1
-#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x24c 0x61c 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x24c 0x61c 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x250 0x620 0x878 0x0 0x0
-#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x250 0x620 0x844 0x1 0x1
-#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x250 0x620 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x250 0x620 0x910 0x3 0x1
-#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x250 0x620 0x7b0 0x4 0x2
-#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x250 0x620 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x250 0x620 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x254 0x624 0x8e8 0x0 0x1
-#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x254 0x624 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x254 0x624 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x254 0x624 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x254 0x624 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x254 0x624 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x254 0x624 0x000 0x6 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x258 0x628 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x258 0x628 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x258 0x628 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x25c 0x62c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x25c 0x62c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x25c 0x62c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x25c 0x62c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x260 0x630 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x260 0x630 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x260 0x630 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x260 0x630 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x264 0x634 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x264 0x634 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x264 0x634 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x264 0x634 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x268 0x638 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x268 0x638 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x268 0x638 0x7f4 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x268 0x638 0x8e8 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x268 0x638 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x268 0x638 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x268 0x638 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x26c 0x63c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x26c 0x63c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x26c 0x63c 0x7fc 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x26c 0x63c 0x8f4 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x26c 0x63c 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x26c 0x63c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x26c 0x63c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x270 0x640 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x270 0x640 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x270 0x640 0x7f8 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x270 0x640 0x8ec 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x270 0x640 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x270 0x640 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x270 0x640 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x274 0x644 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x274 0x644 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x274 0x644 0x800 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x274 0x644 0x8f8 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x274 0x644 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x274 0x644 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x274 0x644 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x278 0x648 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x278 0x648 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x278 0x648 0x810 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x278 0x648 0x8f0 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x278 0x648 0x89c 0x4 0x1
-#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x278 0x648 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x278 0x648 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x27c 0x64c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x27c 0x64c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x27c 0x64c 0x818 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x27c 0x64c 0x8fc 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x27c 0x64c 0x898 0x4 0x1
-#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x27c 0x64c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x27c 0x64c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x280 0x650 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x280 0x650 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x280 0x650 0x814 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x280 0x650 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x280 0x650 0x920 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x280 0x650 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x280 0x650 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x284 0x654 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x284 0x654 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x284 0x654 0x81c 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x284 0x654 0x920 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x284 0x654 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x284 0x654 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x284 0x654 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x288 0x658 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x288 0x658 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x288 0x658 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x288 0x658 0x938 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x288 0x658 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x288 0x658 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x28c 0x65c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x28c 0x65c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x28c 0x65c 0x938 0x3 0x3
-#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x28c 0x65c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x28c 0x65c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x28c 0x65c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x290 0x660 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x290 0x660 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x290 0x660 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x290 0x660 0x940 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x290 0x660 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x290 0x660 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x294 0x664 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x294 0x664 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x294 0x664 0x940 0x3 0x3
-#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x294 0x664 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x294 0x664 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x294 0x664 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x298 0x668 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x298 0x668 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x298 0x668 0x934 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x298 0x668 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x298 0x668 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x298 0x668 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x29c 0x66c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x29c 0x66c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x29c 0x66c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x29c 0x66c 0x934 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x29c 0x66c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x29c 0x66c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x2a0 0x670 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x2a0 0x670 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x2a0 0x670 0x93c 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x2a0 0x670 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x2a0 0x670 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x2a0 0x670 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x2a4 0x674 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x2a4 0x674 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x2a4 0x674 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x2a4 0x674 0x93c 0x3 0x3
-#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x2a4 0x674 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x2a8 0x690 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x2a8 0x690 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x2a8 0x690 0x920 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x2a8 0x690 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x2ac 0x694 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x2ac 0x694 0x920 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x2ac 0x694 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x2ac 0x694 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x2b0 0x698 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x2b0 0x698 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x2b0 0x698 0x928 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x2b0 0x698 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x2b4 0x69c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x2b4 0x69c 0x928 0x1 0x5
-#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x2b4 0x69c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x2b4 0x69c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x2b8 0x6a0 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x2b8 0x6a0 0x924 0x1 0x2
-#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x2b8 0x6a0 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x2bc 0x6a4 0x924 0x1 0x3
-#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x2bc 0x6a4 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x2bc 0x6a4 0x7e4 0x2 0x2
-#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x2c0 0x6a8 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x2c0 0x6a8 0x91c 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x2c0 0x6a8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x2c4 0x6ac 0x91c 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x2c4 0x6ac 0x7e8 0x2 0x1
-#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x2cc 0x6b4 0x92c 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x2d0 0x6b8 0x92c 0x1 0x5
-#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CLE__IPU2_SISG4            0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2dc 0x6c4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_WP_B__IPU2_SISG5           0x2dc 0x6c4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_RB0__IPU2_DI0_PIN01        0x2e0 0x6c8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x2e8 0x6d0 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x2ec 0x6d4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x2ec 0x6d4 0x874 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS2__IPU2_SISG0            0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x2f0 0x6d8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x2f0 0x6d8 0x878 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS3__IPU2_SISG1            0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x2f4 0x6dc 0x000 0x0 0x0
-#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x2f4 0x6dc 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x2f4 0x6dc 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x2f4 0x6dc 0x930 0x2 0x2
-#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x2f8 0x6e0 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x2f8 0x6e0 0x930 0x2 0x3
-#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x2f8 0x6e0 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x2fc 0x6e4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x300 0x6e8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x300 0x6e8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x300 0x6e8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x304 0x6ec 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x304 0x6ec 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x304 0x6ec 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x308 0x6f0 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x308 0x6f0 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x308 0x6f0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x30c 0x6f4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x30c 0x6f4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x30c 0x6f4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x310 0x6f8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x310 0x6f8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x310 0x6f8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x314 0x6fc 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x314 0x6fc 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x314 0x6fc 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x318 0x700 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x318 0x700 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x318 0x700 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x31c 0x704 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x31c 0x704 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x31c 0x704 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x320 0x708 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x320 0x708 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x320 0x708 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x324 0x70c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x324 0x70c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x324 0x70c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x328 0x710 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x328 0x710 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x32c 0x714 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x32c 0x714 0x928 0x2 0x6
-#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x32c 0x714 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x32c 0x714 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x330 0x718 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x330 0x718 0x924 0x2 0x4
-#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x330 0x718 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x330 0x718 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x334 0x71c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x334 0x71c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x334 0x71c 0x924 0x2 0x5
-#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x334 0x71c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x338 0x720 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x338 0x720 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x338 0x720 0x928 0x2 0x7
-#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x338 0x720 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x33c 0x724 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT1__ECSPI5_SS0             0x33c 0x724 0x834 0x1 0x1
-#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x33c 0x724 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x33c 0x724 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x33c 0x724 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x340 0x728 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO            0x340 0x728 0x82c 0x1 0x1
-#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x340 0x728 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x340 0x728 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x344 0x72c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT3__ECSPI5_SS2             0x344 0x72c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x344 0x72c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x344 0x72c 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x344 0x72c 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x344 0x72c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x344 0x72c 0x000 0x6 0x0
-#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x348 0x730 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI             0x348 0x730 0x830 0x1 0x0
-#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x348 0x730 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x348 0x730 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x348 0x730 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x34c 0x734 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT2__ECSPI5_SS1             0x34c 0x734 0x838 0x1 0x1
-#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x34c 0x734 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x34c 0x734 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x34c 0x734 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x34c 0x734 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x34c 0x734 0x000 0x6 0x0
-#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x350 0x738 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK             0x350 0x738 0x828 0x1 0x0
-#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x350 0x738 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x350 0x738 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x350 0x738 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x354 0x73c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK             0x354 0x73c 0x828 0x1 0x1
-#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x354 0x73c 0x8e8 0x2 0x3
-#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x354 0x73c 0x7c0 0x3 0x1
-#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x354 0x73c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x358 0x740 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI             0x358 0x740 0x830 0x1 0x1
-#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x358 0x740 0x8f4 0x2 0x2
-#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x358 0x740 0x7bc 0x3 0x1
-#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x358 0x740 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x35c 0x744 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT3__ECSPI5_SS3             0x35c 0x744 0x000 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x35c 0x744 0x8ec 0x2 0x2
-#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x35c 0x744 0x7c4 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x35c 0x744 0x000 0x5 0x0
-
-#endif /* __DTS_IMX6Q_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
deleted file mode 100644
index bad8d831e64e6..0000000000000
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ /dev/null
@@ -1,695 +0,0 @@
-/*
- * Copyright (C) 2017 NutsBoard.Org
- *
- * Author: Wig Cheng <onlywig@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "NutsBoard i.MX6 Quad Pistachio board";
-	compatible = "nutsboard,imx6q-pistachio", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	wlan_en_reg: regulator-wlan_en {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	reg_usb_otg_vbus: regulator-usb_vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&swbst_reg>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		key-power {
-			label = "Power Button";
-			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_POWER>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx-sgtl5000",
-			   "fsl,imx-audio-sgtl5000";
-		model = "audio-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 50000>;
-		brightness-levels = <
-			0  /*1  2  3  4  5  6*/  7  8  9
-			10 11 12 13 14 15 16 17 18 19
-			20 21 22 23 24 25 26 27 28 29
-			30 31 32 33 34 35 36 37 38 39
-			40 41 42 43 44 45 46 47 48 49
-			50 51 52 53 54 55 56 57 58 59
-			60 61 62 63 64 65 66 67 68 69
-			70 71 72 73 74 75 76 77 78 79
-			80 81 82 83 84 85 86 87 88 89
-			90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <94>;
-		status = "okay";
-	};
-
-	panel {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_1p8v>;
-		VDDIO-supply = <&reg_1p8v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	ar1021@4d {
-		compatible = "microchip,ar1021-i2c";
-		reg = <0x4d>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0  /*pcie power*/
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x1b0b0   /*LCD power*/
-			MX6QDL_PAD_EIM_D16__GPIO3_IO16	0x1b0b0   /*backlight power*/
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1 /*SD3 CD pin*/
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0 /*codec power*/
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22	0x1b0b0 /*touch reset*/
-			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b01 /*touch irq*/
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07	 0x1b0b0/*backlight pwr*/
-			MX6QDL_PAD_GPIO_16__GPIO7_IO11	0x1b0b0 /*gpio 5V_1*/
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19	0x1b0b0 /*gpio 5V_2*/
-			MX6QDL_PAD_EIM_A24__GPIO5_IO04	0x1b0b0 /*gpio 5V_3*/
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0 /*gpio 5V_4*/
-			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0 /*AUX_5V_EN*/
-			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0 /*AUX_5VB_EN*/
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0 /*AUX_3V3_EN*/
-			MX6QDL_PAD_EIM_D21__GPIO3_IO21	0x1b0b0 /*I2C expander pwr*/
-		>;
-	};
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
-			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
-			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
-			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			/* AR8035 reset */
-			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x130b0
-			/* AR8035 interrupt */
-			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
-			/* AR8035 pin strapping: IO voltage: pull up */
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			/* AR8035 pin strapping: PHYADDR#0: pull down */
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
-			/* AR8035 pin strapping: PHYADDR#1: pull down */
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-			/* AR8035 pin strapping: MODE#1: pull up */
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			/* AR8035 pin strapping: MODE#3: pull up */
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			/* AR8035 pin strapping: MODE#0: pull down */
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_keys: gpio_keysgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
-		>;
-	};
-
-	pinctrl_hdmi_cec: hdmicecgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c1_sgtl5000: i2c1-sgtl5000grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1			0x000b0 /* sys_mclk */
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x130b0 /*headphone det*/
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x130b0 /*microphone det*/
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT	    0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_CTS_B	0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
-			MX6QDL_PAD_EIM_D23__UART1_DCD_B	0x1b0b0
-			MX6QDL_PAD_EIM_D24__UART1_DTR_B	0x1b0b0
-			MX6QDL_PAD_EIM_D25__UART1_DSR_B	0x1b0b0
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D28__UART2_CTS_B	0x1b0b1
-			MX6QDL_PAD_EIM_D29__UART2_RTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B	0x1b0b1
-			MX6QDL_PAD_EIM_A21__GPIO2_IO17		 0x15059 /*BT_EN*/
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
-			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D0__SD1_DATA4		0x17059
-			MX6QDL_PAD_NANDF_D1__SD1_DATA5		0x17059
-			MX6QDL_PAD_NANDF_D2__SD1_DATA6		0x17059
-			MX6QDL_PAD_NANDF_D3__SD1_DATA7		0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x15059 /*WL_EN_LDO*/
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x15059 /*WL_EN*/
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x15059 /*WL_IRQ*/
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17071
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17071
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17071
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17071
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17071
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b00
-		>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy1 {
-	fsl,tx-d-cal = <0x5>;
-};
-
-&usbphy2 {
-	fsl,tx-d-cal = <0x5>;
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <8>;
-	keep-power-in-suspend;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	vmmc-supply = <&wlan_en_reg>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	non-removable;
-	cap-power-off-card;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&wdog1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
deleted file mode 100644
index d8fa83effd638..0000000000000
--- a/arch/arm/boot/dts/imx6q-prti6q.dts
+++ /dev/null
@@ -1,543 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2014 Protonic Holland
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-prti6q.dtsi"
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	model = "Protonic PRTI6Q board";
-	compatible = "prt,prti6q", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0xf0000000>;
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 16 64 255>;
-		num-interpolated-steps = <16>;
-		default-brightness-level = <1>;
-		power-supply = <&reg_3v3>;
-		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
-	};
-
-	can_osc: can-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-debug0 {
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-debug1 {
-			function = LED_FUNCTION_SD;
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "disk-activity";
-		};
-	};
-
-	panel {
-		compatible = "kyo,tcg121xglp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	reg_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_wifi: regulator-wifi {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_npd>;
-		enable-active-high;
-		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		regulator-max-microvolt = <1800000>;
-		regulator-min-microvolt = <1800000>;
-		regulator-name = "regulator-WL12xx";
-		startup-delay-us = <70000>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "prti6q-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Line", "Line In Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "External Speaker";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"External Speaker", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-			system-clock-frequency = <0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-			bitclock-master;
-			frame-master;
-		};
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-		spdif-out;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	mux-ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		0
-			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TFSDIR	0
-			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
-	};
-
-	mux-pins3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
-	status = "okay";
-
-	can@0 {
-		compatible = "microchip,mcp2515";
-		reg = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can3>;
-		clocks = <&can_osc>;
-		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
-		spi-max-frequency = <5000000>;
-	};
-
-	adc@1 {
-		compatible = "ti,adc128s052";
-		reg = <1>;
-		spi-max-frequency = <2000000>;
-		vref-supply = <&reg_3v3>;
-	};
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&rgmii_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ9031RNX PHY */
-		rgmii_phy: ethernet-phy@0 {
-			reg = <0>;
-			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	sgtl5000: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0xa>;
-		#sound-dai-cells = <0>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_3v3>;
-		VDDIO-supply = <&reg_3v3>;
-		VDDD-supply = <&reg_1v8>;
-	};
-};
-
-/* DDC */
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	adc@49 {
-		compatible = "ti,ads1015";
-		reg = <0x49>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* can2_l */
-		channel@4 {
-			reg = <4>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		/* can2_h */
-		channel@5 {
-			reg = <5>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		/* can1_l */
-		channel@6 {
-			reg = <6>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		/* can1_h */
-		channel@7 {
-			reg = <7>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&sata {
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&ssi1 {
-	#sound-dai-cells = <0>;
-	fsl,mode = "ac97-slave";
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	non-removable;
-	vmmc-supply = <&reg_wifi>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-
-	wifi {
-		compatible = "ti,wl1271";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi>;
-		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-		tcxo-clock-frequency = <19200000>;
-	};
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-		>;
-	};
-
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b008
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b008
-		>;
-	};
-
-	pinctrl_can3: can3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			/* CS */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
-		>;
-	};
-
-	pinctrl_ecspi2_cs: ecspi2csgrp {
-		fsl,pins = <
-			/* ADC128S022 CS */
-			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x10030
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
-
-			/* Phy reset */
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
-		>;
-	};
-
-	pinctrl_hdmi: hdmigrp {
-		fsl,pins = <
-			/* NOTE: DDC is done via I2C2, so DON'T
-			 * configure DDC pins for HDMI!
-			 */
-			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
-		>;
-	};
-
-	/* DDC */
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
-		>;
-	};
-
-	pinctrl_spdif: spdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_16__SPDIF_IN		0x1b0b0
-			MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
-			MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg_id: usbotgidgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1f058
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-		>;
-	};
-
-	pinctrl_wifi: wifigrp {
-		fsl,pins = <
-			/* WL12xx IRQ */
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x10880
-		>;
-	};
-
-	pinctrl_wifi_npd: wifinpd {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b8b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts
deleted file mode 100644
index 54a57a4548e24..0000000000000
--- a/arch/arm/boot/dts/imx6q-prtwd2.dts
+++ /dev/null
@@ -1,199 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2018 Protonic Holland
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-prti6q.dtsi"
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Protonic WD2 board";
-	compatible = "prt,prtwd2", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	clk50m_phy: phy-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-output-names = "enet_ref_pad";
-	};
-
-	usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_npd>;
-		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
-	};
-
-	/* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
-	i2c {
-		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c4>;
-		sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <20>;	/* ~10 kHz */
-		i2c-gpio,scl-output-only;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
-	status = "okay";
-};
-
-&clks {
-	clocks = <&clk50m_phy>;
-	clock-names = "enet_ref_pad";
-	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
-	assigned-clock-parents = <&clk50m_phy>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	status = "okay";
-
-	fixed-link {
-		speed = <100>;
-		pause;
-		full-duplex;
-	};
-};
-
-&i2c3 {
-	adc@49 {
-		compatible = "ti,ads1015";
-		reg = <0x49>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* V in */
-		channel@4 {
-			reg = <4>;
-			ti,gain = <1>;
-			ti,datarate = <3>;
-		};
-
-		/* I charge */
-		channel@5 {
-			reg = <5>;
-			ti,gain = <1>;
-			ti,datarate = <3>;
-		};
-
-		/* V bus  */
-		channel@6 {
-			reg = <6>;
-			ti,gain = <1>;
-			ti,datarate = <3>;
-		};
-
-		/* nc */
-		channel@7 {
-			reg = <7>;
-			ti,gain = <1>;
-			ti,datarate = <3>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	no-1-8-v;
-	non-removable;
-	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_eth_chg>;
-
-	pinctrl_can1phy: can1phy {
-		fsl,pins = <
-			/* CAN1_SR */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			/* MX6QDL_ENET_PINGRP4 */
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x130b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b0
-			/* Phy reset */
-			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
-			/* nINTRP */
-			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
-
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__GPIO1_IO22	0x1f8b0
-			MX6QDL_PAD_ENET_MDC__GPIO1_IO31		0x1f8b0
-		>;
-	};
-
-	pinctrl_usb_eth_chg: usbethchggrp {
-		fsl,pins = <
-			/* USB charging control */
-			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x130b0
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x130b0
-			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x130b0
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x130b0
-			>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-		>;
-	};
-
-	pinctrl_wifi_npd: wifinpd {
-		fsl,pins = <
-			/* WL_REG_ON */
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x13069
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts
deleted file mode 100644
index 271f4b2d9b9f0..0000000000000
--- a/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2014 FEDEVEL, Inc.
- *
- * Author: Robert Nelson <robertcnelson@gmail.com>
- */
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-rex.dtsi"
-
-/ {
-	model = "Rex Pro i.MX6 Quad Board";
-	compatible = "rex,imx6q-rex-pro", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-&ecspi3 {
-	flash: flash@0 {
-		compatible = "sst,sst25vf032b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
deleted file mode 100644
index 6e981a3e0a839..0000000000000
--- a/arch/arm/boot/dts/imx6q-sabreauto.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sabreauto.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad SABRE Automotive Board";
-	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
deleted file mode 100644
index 7c6a2f234ccbd..0000000000000
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-sabrelite.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad SABRE Lite Board";
-	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
-
-&ipu1_csi1_from_mipi_vc1 {
-	clock-lanes = <0>;
-	data-lanes = <1 2>;
-};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
deleted file mode 100644
index eec944673c0bf..0000000000000
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sabresd.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad SABRE Smart Device Board";
-	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
-
-&ipu1_csi1_from_mipi_vc1 {
-	clock-lanes = <0>;
-	data-lanes = <1 2>;
-};
diff --git a/arch/arm/boot/dts/imx6q-savageboard.dts b/arch/arm/boot/dts/imx6q-savageboard.dts
deleted file mode 100644
index 717ac62fc2cf6..0000000000000
--- a/arch/arm/boot/dts/imx6q-savageboard.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-savageboard.dtsi"
-
-/ {
-	model = "Poslab SavageBoard Quad";
-	compatible = "poslab,imx6q-savageboard", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts
deleted file mode 100644
index 9054c1d58b9d1..0000000000000
--- a/arch/arm/boot/dts/imx6q-sbc6x.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Pavel Machek <pavel@denx.de>
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-
-/ {
-	model = "MicroSys sbc6x board";
-	compatible = "microsys,sbc6x", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&iomuxc {
-	imx6q-sbc6x {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
deleted file mode 100644
index ff97d22eb09f5..0000000000000
--- a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-skov-cpu.dtsi"
-#include "imx6qdl-skov-cpu-revc.dtsi"
-#include "imx6qdl-skov-revc-lt2.dtsi"
-
-/ {
-	model = "SKOV IMX6 CPU QuadCore";
-	compatible = "skov,imx6q-skov-revc-lt2", "fsl,imx6q";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			/* internal 22 k pull up required */
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001f878
-			/* internal 22 k pull up required */
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001f878
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts b/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts
deleted file mode 100644
index 3e3b36ad362a6..0000000000000
--- a/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-skov-cpu.dtsi"
-#include "imx6qdl-skov-cpu-revc.dtsi"
-
-/ {
-	model = "SKOV IMX6 CPU QuadCore";
-	compatible = "skov,imx6q-skov-revc-lt6", "fsl,imx6q";
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
-		pwms = <&pwm2 0 20000 0>;
-		brightness-levels = <0 255>;
-		num-interpolated-steps = <17>;
-		default-brightness-level = <8>;
-		power-supply = <&reg_24v0>;
-	};
-
-	display {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1>;
-
-		port@0 {
-			reg = <0>;
-
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			display0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	panel {
-		compatible = "logictechno,lttd800480070-l6wh-rt";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display0_out>;
-			};
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&iomuxc {
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			/* internal 22 k pull up required */
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001F878
-			/* internal 22 k pull up required */
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001F878
-		>;
-	};
-
-	pinctrl_ipu1: ipu1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts b/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
deleted file mode 100644
index a3f247c722b43..0000000000000
--- a/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-skov-cpu.dtsi"
-
-/ {
-	model = "SKOV IMX6 CPU QuadCore";
-	compatible = "skov,imx6q-skov-reve-mi1010ait-1cp1", "fsl,imx6q";
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
-		pwms = <&pwm2 0 20000 0>;
-		brightness-levels = <0 255>;
-		num-interpolated-steps = <17>;
-		default-brightness-level = <8>;
-		power-supply = <&reg_24v0>;
-	};
-
-	panel {
-		compatible = "multi-inno,mi1010ait-1cp";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5406";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreen>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <1280>;
-		touchscreen-size-y = <800>;
-		wakeup-source;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			/* external 1 k pull up */
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x40010878
-			/* external 1 k pull up */
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x40010878
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			/* internal 22 k pull up required */
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001F878
-			/* internal 22 k pull up required */
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001F878
-		>;
-	};
-
-	pinctrl_touchscreen: touchscreengrp {
-		fsl,pins = <
-			/* external 10 k pull up */
-			/* CTP_INT */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
-			/* CTP_RST */
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
-		>;
-	};
-};
-
-&reg_tft_vcom {
-	regulator-min-microvolt = <3160000>;
-	regulator-max-microvolt = <3160000>;
-	voltage-table = <3160000 73>;
-};
diff --git a/arch/arm/boot/dts/imx6q-solidsense.dts b/arch/arm/boot/dts/imx6q-solidsense.dts
deleted file mode 100644
index 0e6a325df3632..0000000000000
--- a/arch/arm/boot/dts/imx6q-solidsense.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
- * Based on dt work by Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-emmc.dtsi"
-#include "imx6qdl-sr-som-ti.dtsi"
-#include "imx6qdl-hummingboard2.dtsi"
-#include "imx6qdl-solidsense.dtsi"
-
-/ {
-	model = "SolidRun SolidSense Dual/Quad (1.5som+emmc)";
-	compatible = "solidrun,solidsense/q", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
deleted file mode 100644
index 2f576e2ce73f2..0000000000000
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ /dev/null
@@ -1,407 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2014 Soeren Moch <smoch@web.de>
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "TBS2910 Matrix ARM mini PC";
-	compatible = "tbs,imx6q-tbs2910", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	aliases {
-		mmc0 = &usdhc2;
-		mmc1 = &usdhc3;
-		mmc2 = &usdhc4;
-		/delete-property/ mmc3;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	fan {
-		compatible = "gpio-fan";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_fan>;
-		gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0    0
-				      3000 1>;
-	};
-
-	ir_recv {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ir>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led-blue {
-			label = "blue_status_led";
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	sound-sgtl5000 {
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "On-board Codec";
-		mux-ext-port = <3>;
-		mux-int-port = <1>;
-		ssi-controller = <&ssi1>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "On-board SPDIF";
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-};
-
-&audmux {
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy: ethernet-phy@4 {
-			reg = <4>;
-			qca,clk-out-frequency = <125000000>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	sgtl5000: sgtl5000@a {
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	rtc: rtc@68 {
-		compatible = "dallas,ds1307";
-		reg = <0x68>;
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	fsl,transmit-level-mV = <1104>;
-	fsl,transmit-boost-mdB = <3330>;
-	fsl,transmit-atten-16ths = <16>;
-	fsl,receive-eq-mdB = <3000>;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_5p0v>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_5p0v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
-	voltage-ranges = <3300 3300>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
-	voltage-ranges = <3300 3300>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
-	voltage-ranges = <3300 3300>;
-	non-removable;
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
-		>;
-	};
-
-	pinctrl_gpio_fan: gpiofangrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1
-		>;
-	};
-
-	pinctrl_hdmi: hdmigrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1
-		>;
-	};
-
-	pinctrl_ir: irgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059
-		>;
-	};
-
-	pinctrl_sgtl5000: sgtl5000grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0
-		>;
-	};
-
-	pinctrl_spdif: spdifgrp {
-		fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059
-			MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tqma6a.dtsi b/arch/arm/boot/dts/imx6q-tqma6a.dtsi
deleted file mode 100644
index ab4c07c13a133..0000000000000
--- a/arch/arm/boot/dts/imx6q-tqma6a.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include "imx6q.dtsi"
-#include "imx6qdl-tqma6a.dtsi"
-#include "imx6qdl-tqma6.dtsi"
-
-/ {
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tqma6b.dtsi b/arch/arm/boot/dts/imx6q-tqma6b.dtsi
deleted file mode 100644
index 7224c376c3183..0000000000000
--- a/arch/arm/boot/dts/imx6q-tqma6b.dtsi
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- */
-
-#include "imx6q.dtsi"
-#include "imx6qdl-tqma6b.dtsi"
-#include "imx6qdl-tqma6.dtsi"
-
-/ {
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/imx6q-ts4900.dts
deleted file mode 100644
index dce1e8671ebea..0000000000000
--- a/arch/arm/boot/dts/imx6q-ts4900.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2015 Technologic Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-ts4900.dtsi"
-
-/ {
-	model = "Technologic Systems i.MX6 Quad TS-4900 (Default Device Tree)";
-	compatible = "technologic,imx6q-ts4900", "fsl,imx6q";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-ts7970.dts b/arch/arm/boot/dts/imx6q-ts7970.dts
deleted file mode 100644
index 570bd3c309a6e..0000000000000
--- a/arch/arm/boot/dts/imx6q-ts7970.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright 2015 Technologic Systems
- * Copyright 2017 Savoir-faire Linux
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-ts7970.dtsi"
-
-/ {
-	model = "Technologic Systems i.MX6 Quad TS-7970 (Default Device Tree)";
-	compatible = "technologic,imx6q-ts7970", "fsl,imx6q";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
deleted file mode 100644
index ac3050a835e55..0000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&backlight {
-	pwms = <&pwm2 0 500000 0>;
-	/delete-property/ turn-on-delay-ms;
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcd_panel {
-	compatible = "edt,etm0700g0edh6";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
deleted file mode 100644
index 4ee860b626ff6..0000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ipu2 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
deleted file mode 100644
index a773f252816cb..0000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&backlight {
-	pwms = <&pwm2 0 500000 0>;
-	/delete-property/ turn-on-delay-ms;
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcd_panel {
-	compatible = "edt,etm0700g0edh6";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
deleted file mode 100644
index 0a4daec8d3ad3..0000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1020 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
deleted file mode 100644
index 9ffbb0fe7df86..0000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q-tx6q-1036.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
deleted file mode 100644
index cb2fcb4896c65..0000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1036.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1036 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
deleted file mode 100644
index d43a5d8f17497..0000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q-tx6q-1010.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
deleted file mode 100644
index f7b0acb65352c..0000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lvds.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
deleted file mode 100644
index 387edf2b3f96b..0000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q-tx6q-1110.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
deleted file mode 100644
index 52e9f4a211d08..0000000000000
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-udoo.dtsi"
-
-/ {
-	model = "Udoo i.MX6 Quad Board";
-	compatible = "udoo,imx6q-udoo", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
deleted file mode 100644
index ad59b23ef27a0..0000000000000
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * Copyright 2013 CompuLab Ltd.
- * Copyright 2016 Christopher Spinrath
- *
- * Based on the devicetree distributed with the vendor kernel for the
- * Utilite Pro:
- *	Copyright 2013 CompuLab Ltd.
- *	Author: Valentin Raevsky <valentin@compulab.co.il>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/input/input.h>
-#include "imx6q-cm-fx6.dts"
-
-/ {
-	model = "CompuLab Utilite Pro";
-	compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q";
-
-	aliases {
-		ethernet1 = &eth1;
-		rtc0 = &em3027;
-		rtc1 = &snvs_rtc;
-	};
-
-	encoder {
-		compatible = "ti,tfp410";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&parallel_display_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		key-power {
-			label = "Power Button";
-			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hpd>;
-		type = "a";
-		ddc-i2c-bus = <&i2c_dvi_ddc>;
-		hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mux-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c1>;
-
-		i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-				pagesize = <16>;
-			};
-
-			em3027: rtc@56 {
-				compatible = "emmicro,em3027";
-				reg = <0x56>;
-			};
-		};
-
-		i2c_dvi_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	parallel-display {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1>;
-
-		interface-pix-fmt = "rgb24";
-
-		port@0 {
-			reg = <0>;
-
-			parallel_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			parallel_display_out: endpoint {
-				remote-endpoint = <&tfp410_in>;
-			};
-		};
-	};
-};
-
-/*
- * A single IPU is not able to drive both display interfaces available on the
- * Utilite Pro at high resolution due to its bandwidth limitation. Since the
- * tfp410 encoder is wired up to IPU1, sever the link between IPU1 and the
- * SoC-internal Designware HDMI encoder forcing the latter to be connected to
- * IPU2 instead of IPU1.
- */
-/delete-node/&ipu1_di0_hdmi;
-/delete-node/&hdmi_mux_0;
-/delete-node/&ipu1_di1_hdmi;
-/delete-node/&hdmi_mux_1;
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmicec>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_gpio_keys: gpio_keysgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
-		>;
-	};
-
-	pinctrl_hdmicec: hdmicecgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-		>;
-	};
-
-	pinctrl_hpd: hpdgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c1mux: i2c1muxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1: ipu1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x38
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x38
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x38
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x38
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x38
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x38
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x38
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x38
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x38
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x38
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x38
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x38
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x38
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x38
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x38
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x38
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x38
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x38
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x38
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x38
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x38
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x38
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x38
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x38
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x38
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x38
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x38
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1
-			MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1
-			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170B9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100B9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170B9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170B9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170B9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170B9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170F9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100F9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170F9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170F9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170F9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170F9
-		>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&parallel_display_in>;
-};
-
-&pcie {
-	pcie@0,0 {
-		reg = <0x000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		/* non-removable i211 ethernet card */
-		eth1: intel,i211@pcie0,0 {
-			reg = <0x010000 0 0 0 0>;
-		};
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	no-1-8-v;
-	broken-cd;
-	keep-power-in-suspend;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
deleted file mode 100644
index 2290c1237634d..0000000000000
--- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
+++ /dev/null
@@ -1,235 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Support for Variscite DART-MX6 Carrier-board
- *
- * Copyright 2017 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-var-dart.dtsi"
-#include <dt-bindings/input/linux-event-codes.h>
-
-/ {
-	model = "Variscite DART-MX6 Carrier-board";
-	compatible = "variscite,dt6customboard", "fsl,imx6q";
-
-	backlight_lvds: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
-		brightness-levels = <0 4 8 16 32 64 128 248>;
-		default-brightness-level = <7>;
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		key-back {
-			gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			label = "Key Back";
-			linux,input-type = <1>;
-			debounce-interval = <100>;
-			wakeup-source;
-		};
-
-		key-home {
-			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			label = "Key Home";
-			linux,input-type = <1>;
-			debounce-interval = <100>;
-			wakeup-source;
-		};
-
-		key-menu {
-			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-			label = "Key Menu";
-			linux,input-type = <1>;
-			debounce-interval = <100>;
-			wakeup-source;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	panel1: lvds-panel {
-		compatible = "sgd,gktw70sdae4se", "panel-lvds";
-		backlight = <&backlight_lvds>;
-		width-mm = <153>;
-		height-mm = <86>;
-		label = "gktw70sdae4se";
-		data-mapping = "jeida-18";
-
-		panel-timing {
-			clock-frequency = <32000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hback-porch = <39>;
-			hfront-porch = <39>;
-			vback-porch = <29>;
-			vfront-porch = <13>;
-			hsync-len = <47>;
-			vsync-len = <2>;
-		};
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds1_out>;
-			};
-		};
-	};
-
-	reg_usb_h1_vbus: regulator-usbh1vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg_vbus: regulator-usbotgvbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "dt6-customboard-audio";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_codec>;
-		simple-audio-card,frame-master = <&sound_codec>;
-		simple-audio-card,widgets = "Headphone", "Headphone Jack",
-					    "Line", "Line In";
-		simple-audio-card,routing = "Headphone Jack", "HPLOUT",
-					    "Headphone Jack", "HPROUT",
-					    "LINE1L", "Line In",
-					    "LINE1R", "Line In";
-
-		sound_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi2>;
-		};
-
-		sound_codec: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			clocks = <&clks IMX6QDL_CLK_CKO>;
-		};
-	};
-};
-
-&can1 {
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
-		   <&gpio4 10 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&fec {
-	status = "okay";
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		touchscreen-inverted-x;
-		touchscreen-inverted-y;
-		wakeup-source;
-	};
-
-	rtc@68 {
-		compatible = "isil,isl12057";
-		reg = <0x68>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@1 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds1_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	dr_mode = "otg";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usdhc2 {
-	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/imx6q-vicut1.dts
deleted file mode 100644
index dd91aff3f9e2d..0000000000000
--- a/arch/arm/boot/dts/imx6q-vicut1.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2014 Protonic Holland
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-vicut1.dtsi"
-#include "imx6qdl-vicut1-12inch.dtsi"
-
-/ {
-	model = "Kverneland UT1Q Board";
-	compatible = "kvg,vicut1q", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
deleted file mode 100644
index f6ccbecff92c2..0000000000000
--- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-wandboard-revb1.dtsi"
-
-/ {
-	model = "Wandboard i.MX6 Quad Board rev B1";
-	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
deleted file mode 100644
index 55331021d80cf..0000000000000
--- a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-wandboard-revd1.dtsi"
-
-/ {
-	model = "Wandboard i.MX6 Quad Board revD1";
-	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts
deleted file mode 100644
index 0be548beef86d..0000000000000
--- a/arch/arm/boot/dts/imx6q-wandboard.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-wandboard-revc1.dtsi"
-
-/ {
-	model = "Wandboard i.MX6 Quad Board";
-	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-yapp4-crux.dts b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
deleted file mode 100644
index bddf3822ebf73..0000000000000
--- a/arch/arm/boot/dts/imx6q-yapp4-crux.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2021 Y Soft Corporation, a.s.
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6dl-yapp4-common.dtsi"
-
-/ {
-	model = "Y Soft IOTA Crux i.MX6Quad board";
-	compatible = "ysoft,imx6q-yapp4-crux", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0xf0000000>;
-	};
-};
-
-&gpio_oled {
-	status = "okay";
-};
-
-&leds {
-	status = "okay";
-};
-
-&oled_1305 {
-	status = "okay";
-};
-
-&oled_1309 {
-	status = "okay";
-};
-
-&reg_pu {
-	regulator-always-on;
-};
-
-&reg_usb_h1_vbus {
-	status = "okay";
-};
-
-&touchkeys {
-	status = "okay";
-};
-
-&uart2 {
-	status = "disabled";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts
deleted file mode 100644
index ec6651ba4ba2e..0000000000000
--- a/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2021 Y Soft Corporation, a.s.
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6dl-yapp43-common.dtsi"
-
-/ {
-	model = "Y Soft IOTA Pegasus i.MX6Quad board";
-	compatible = "ysoft,imx6q-yapp4-pegasus", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0xf0000000>;
-	};
-};
-
-&gpio_oled {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&leds {
-	status = "okay";
-};
-
-&oled_1305 {
-	status = "okay";
-};
-
-&oled_1309 {
-	status = "okay";
-};
-
-&reg_pu {
-	regulator-always-on;
-};
-
-&reg_usb_h1_vbus {
-	status = "okay";
-};
-
-&touchkeys {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts
deleted file mode 100644
index a1c5e69d81ba5..0000000000000
--- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2016-2017 Zodiac Inflight Innovations
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-zii-rdu2.dtsi"
-
-/ {
-	model = "ZII RDU2 Board";
-	compatible = "zii,imx6q-zii-rdu2", "fsl,imx6q";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
deleted file mode 100644
index df86049a695b1..0000000000000
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ /dev/null
@@ -1,553 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q-pinfunc.h"
-#include "imx6qdl.dtsi"
-
-/ {
-	aliases {
-		ipu1 = &ipu2;
-		spi4 = &ecspi5;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			operating-points = <
-				/* kHz    uV */
-				1200000 1275000
-				996000  1250000
-				852000  1250000
-				792000  1175000
-				396000  975000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz  SOC-PU uV */
-				1200000 1275000
-				996000	1250000
-				852000	1250000
-				792000	1175000
-				396000	1175000
-			>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			#cooling-cells = <2>;
-			clocks = <&clks IMX6QDL_CLK_ARM>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-				 <&clks IMX6QDL_CLK_STEP>,
-				 <&clks IMX6QDL_CLK_PLL1_SW>,
-				 <&clks IMX6QDL_CLK_PLL1_SYS>;
-			clock-names = "arm", "pll2_pfd2_396m", "step",
-				      "pll1_sw", "pll1_sys";
-			arm-supply = <&reg_arm>;
-			pu-supply = <&reg_pu>;
-			soc-supply = <&reg_soc>;
-			nvmem-cells = <&cpu_speed_grade>;
-			nvmem-cell-names = "speed_grade";
-		};
-
-		cpu1: cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			operating-points = <
-				/* kHz    uV */
-				1200000 1275000
-				996000  1250000
-				852000  1250000
-				792000  1175000
-				396000  975000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz  SOC-PU uV */
-				1200000 1275000
-				996000	1250000
-				852000	1250000
-				792000	1175000
-				396000	1175000
-			>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			#cooling-cells = <2>;
-			clocks = <&clks IMX6QDL_CLK_ARM>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-				 <&clks IMX6QDL_CLK_STEP>,
-				 <&clks IMX6QDL_CLK_PLL1_SW>,
-				 <&clks IMX6QDL_CLK_PLL1_SYS>;
-			clock-names = "arm", "pll2_pfd2_396m", "step",
-				      "pll1_sw", "pll1_sys";
-			arm-supply = <&reg_arm>;
-			pu-supply = <&reg_pu>;
-			soc-supply = <&reg_soc>;
-		};
-
-		cpu2: cpu@2 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-			operating-points = <
-				/* kHz    uV */
-				1200000 1275000
-				996000  1250000
-				852000  1250000
-				792000  1175000
-				396000  975000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz  SOC-PU uV */
-				1200000 1275000
-				996000	1250000
-				852000	1250000
-				792000	1175000
-				396000	1175000
-			>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			#cooling-cells = <2>;
-			clocks = <&clks IMX6QDL_CLK_ARM>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-				 <&clks IMX6QDL_CLK_STEP>,
-				 <&clks IMX6QDL_CLK_PLL1_SW>,
-				 <&clks IMX6QDL_CLK_PLL1_SYS>;
-			clock-names = "arm", "pll2_pfd2_396m", "step",
-				      "pll1_sw", "pll1_sys";
-			arm-supply = <&reg_arm>;
-			pu-supply = <&reg_pu>;
-			soc-supply = <&reg_soc>;
-		};
-
-		cpu3: cpu@3 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-			operating-points = <
-				/* kHz    uV */
-				1200000 1275000
-				996000  1250000
-				852000  1250000
-				792000  1175000
-				396000  975000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz  SOC-PU uV */
-				1200000 1275000
-				996000	1250000
-				852000	1250000
-				792000	1175000
-				396000	1175000
-			>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			#cooling-cells = <2>;
-			clocks = <&clks IMX6QDL_CLK_ARM>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-				 <&clks IMX6QDL_CLK_STEP>,
-				 <&clks IMX6QDL_CLK_PLL1_SW>,
-				 <&clks IMX6QDL_CLK_PLL1_SYS>;
-			clock-names = "arm", "pll2_pfd2_396m", "step",
-				      "pll1_sw", "pll1_sys";
-			arm-supply = <&reg_arm>;
-			pu-supply = <&reg_pu>;
-			soc-supply = <&reg_soc>;
-		};
-	};
-
-	soc: soc {
-		ocram: sram@900000 {
-			compatible = "mmio-sram";
-			reg = <0x00900000 0x40000>;
-			ranges = <0 0x00900000 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&clks IMX6QDL_CLK_OCRAM>;
-		};
-
-		aips1: bus@2000000 { /* AIPS1 */
-			spba-bus@2000000 {
-				ecspi5: spi@2018000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02018000 0x4000>;
-					interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6Q_CLK_ECSPI5>,
-						 <&clks IMX6Q_CLK_ECSPI5>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-			};
-		};
-
-		sata: sata@2200000 {
-			compatible = "fsl,imx6q-ahci";
-			reg = <0x02200000 0x4000>;
-			interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6QDL_CLK_SATA>,
-				 <&clks IMX6QDL_CLK_SATA_REF_100M>,
-				 <&clks IMX6QDL_CLK_AHB>;
-			clock-names = "sata", "sata_ref", "ahb";
-			status = "disabled";
-		};
-
-		gpu_vg: gpu@2204000 {
-			compatible = "vivante,gc";
-			reg = <0x02204000 0x4000>;
-			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
-				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
-			clock-names = "bus", "core";
-			power-domains = <&pd_pu>;
-			#cooling-cells = <2>;
-		};
-
-		ipu2: ipu@2800000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,imx6q-ipu";
-			reg = <0x02800000 0x400000>;
-			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6QDL_CLK_IPU2>,
-				 <&clks IMX6QDL_CLK_IPU2_DI0>,
-				 <&clks IMX6QDL_CLK_IPU2_DI1>;
-			clock-names = "bus", "di0", "di1";
-			resets = <&src 4>;
-
-			ipu2_csi0: port@0 {
-				reg = <0>;
-
-				ipu2_csi0_from_mipi_vc2: endpoint {
-					remote-endpoint = <&mipi_vc2_to_ipu2_csi0>;
-				};
-			};
-
-			ipu2_csi1: port@1 {
-				reg = <1>;
-
-				ipu2_csi1_from_ipu2_csi1_mux: endpoint {
-					remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>;
-				};
-			};
-
-			ipu2_di0: port@2 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <2>;
-
-				ipu2_di0_disp0: endpoint@0 {
-					reg = <0>;
-				};
-
-				ipu2_di0_hdmi: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&hdmi_mux_2>;
-				};
-
-				ipu2_di0_mipi: endpoint@2 {
-					reg = <2>;
-					remote-endpoint = <&mipi_mux_2>;
-				};
-
-				ipu2_di0_lvds0: endpoint@3 {
-					reg = <3>;
-					remote-endpoint = <&lvds0_mux_2>;
-				};
-
-				ipu2_di0_lvds1: endpoint@4 {
-					reg = <4>;
-					remote-endpoint = <&lvds1_mux_2>;
-				};
-			};
-
-			ipu2_di1: port@3 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <3>;
-
-				ipu2_di1_hdmi: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&hdmi_mux_3>;
-				};
-
-				ipu2_di1_mipi: endpoint@2 {
-					reg = <2>;
-					remote-endpoint = <&mipi_mux_3>;
-				};
-
-				ipu2_di1_lvds0: endpoint@3 {
-					reg = <3>;
-					remote-endpoint = <&lvds0_mux_3>;
-				};
-
-				ipu2_di1_lvds1: endpoint@4 {
-					reg = <4>;
-					remote-endpoint = <&lvds1_mux_3>;
-				};
-			};
-		};
-	};
-
-	capture-subsystem {
-		compatible = "fsl,imx-capture-subsystem";
-		ports = <&ipu1_csi0>, <&ipu1_csi1>, <&ipu2_csi0>, <&ipu2_csi1>;
-	};
-
-	display-subsystem {
-		compatible = "fsl,imx-display-subsystem";
-		ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
-	};
-};
-
-&gpio1 {
-	gpio-ranges = <&iomuxc  0 136  2>, <&iomuxc  2 141 1>, <&iomuxc  3 139 1>,
-		      <&iomuxc  4 142  2>, <&iomuxc  6 140 1>, <&iomuxc  7 144 2>,
-		      <&iomuxc  9 138  1>, <&iomuxc 10 213 3>, <&iomuxc 13  20 1>,
-		      <&iomuxc 14  19  1>, <&iomuxc 15  21 1>, <&iomuxc 16 208 1>,
-		      <&iomuxc 17 207  1>, <&iomuxc 18 210 3>, <&iomuxc 21 209 1>,
-		      <&iomuxc 22 116 10>;
-};
-
-&gpio2 {
-	gpio-ranges = <&iomuxc  0 191 16>, <&iomuxc 16 55 14>, <&iomuxc 30 35 1>,
-		      <&iomuxc 31  44  1>;
-};
-
-&gpio3 {
-	gpio-ranges = <&iomuxc 0 69 16>, <&iomuxc 16 36 8>, <&iomuxc 24 45 8>;
-};
-
-&gpio4 {
-	gpio-ranges = <&iomuxc 5 149 1>, <&iomuxc 6 126 10>, <&iomuxc 16 87 16>;
-};
-
-&gpio5 {
-	gpio-ranges = <&iomuxc 0  85  1>, <&iomuxc  2  34  1>, <&iomuxc 4 53 1>,
-		      <&iomuxc 5 103 13>, <&iomuxc 18 150 14>;
-};
-
-&gpio6 {
-	gpio-ranges = <&iomuxc  0 164 6>, <&iomuxc  6  54 1>, <&iomuxc  7 181  5>,
-		      <&iomuxc 14 186 3>, <&iomuxc 17 170 2>, <&iomuxc 19  22 12>,
-		      <&iomuxc 31  86 1>;
-};
-
-&gpio7 {
-	gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>;
-};
-
-&gpr {
-	ipu1_csi0_mux {
-		compatible = "video-mux";
-		mux-controls = <&mux 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			ipu1_csi0_mux_from_mipi_vc0: endpoint {
-				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			ipu1_csi0_mux_from_parallel_sensor: endpoint {
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
-				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
-			};
-		};
-	};
-
-	ipu2_csi1_mux {
-		compatible = "video-mux";
-		mux-controls = <&mux 1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			ipu2_csi1_mux_from_mipi_vc3: endpoint {
-				remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			ipu2_csi1_mux_from_parallel_sensor: endpoint {
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			ipu2_csi1_mux_to_ipu2_csi1: endpoint {
-				remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>;
-			};
-		};
-	};
-};
-
-&hdmi {
-	compatible = "fsl,imx6q-hdmi";
-
-	ports {
-		port@2 {
-			reg = <2>;
-
-			hdmi_mux_2: endpoint {
-				remote-endpoint = <&ipu2_di0_hdmi>;
-			};
-		};
-
-		port@3 {
-			reg = <3>;
-
-			hdmi_mux_3: endpoint {
-				remote-endpoint = <&ipu2_di1_hdmi>;
-			};
-		};
-	};
-};
-
-&iomuxc {
-	compatible = "fsl,imx6q-iomuxc";
-};
-
-&ipu1_csi1 {
-	ipu1_csi1_from_mipi_vc1: endpoint {
-		remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
-	};
-};
-
-&ldb {
-	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
-	clock-names = "di0_pll", "di1_pll",
-		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
-		      "di0", "di1";
-
-	lvds-channel@0 {
-		port@2 {
-			reg = <2>;
-
-			lvds0_mux_2: endpoint {
-				remote-endpoint = <&ipu2_di0_lvds0>;
-			};
-		};
-
-		port@3 {
-			reg = <3>;
-
-			lvds0_mux_3: endpoint {
-				remote-endpoint = <&ipu2_di1_lvds0>;
-			};
-		};
-	};
-
-	lvds-channel@1 {
-		port@2 {
-			reg = <2>;
-
-			lvds1_mux_2: endpoint {
-				remote-endpoint = <&ipu2_di0_lvds1>;
-			};
-		};
-
-		port@3 {
-			reg = <3>;
-
-			lvds1_mux_3: endpoint {
-				remote-endpoint = <&ipu2_di1_lvds1>;
-			};
-		};
-	};
-};
-
-&mipi_csi {
-	port@1 {
-		reg = <1>;
-
-		mipi_vc0_to_ipu1_csi0_mux: endpoint {
-			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
-		};
-	};
-
-	port@2 {
-		reg = <2>;
-
-		mipi_vc1_to_ipu1_csi1: endpoint {
-			remote-endpoint = <&ipu1_csi1_from_mipi_vc1>;
-		};
-	};
-
-	port@3 {
-		reg = <3>;
-
-		mipi_vc2_to_ipu2_csi0: endpoint {
-			remote-endpoint = <&ipu2_csi0_from_mipi_vc2>;
-		};
-	};
-
-	port@4 {
-		reg = <4>;
-
-		mipi_vc3_to_ipu2_csi1_mux: endpoint {
-			remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>;
-		};
-	};
-};
-
-&mipi_dsi {
-	ports {
-		port@2 {
-			reg = <2>;
-
-			mipi_mux_2: endpoint {
-				remote-endpoint = <&ipu2_di0_mipi>;
-			};
-		};
-
-		port@3 {
-			reg = <3>;
-
-			mipi_mux_3: endpoint {
-				remote-endpoint = <&ipu2_di1_mipi>;
-			};
-		};
-	};
-};
-
-&mux {
-	mux-reg-masks = <0x04 0x00080000>, /* MIPI_IPU1_MUX */
-			<0x04 0x00100000>, /* MIPI_IPU2_MUX */
-			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
-			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
-			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
-			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
-			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
-};
-
-&vpu {
-	compatible = "fsl,imx6q-vpu", "cnm,coda960";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
deleted file mode 100644
index 4cc965277c521..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ /dev/null
@@ -1,1371 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2014-2022 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module";
-	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 45 63 88 119 158 203 255>;
-		default-brightness-level = <4>;
-		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		power-supply = <&reg_module_3v3>;
-		pwms = <&pwm4 0 5000000 PWM_POLARITY_INVERTED>;
-		status = "disabled";
-	};
-
-	clk_ov5640_osc: clk-ov5640-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		key-wakeup {
-			debounce-interval = <10>;
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			label = "Wake-Up";
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "disabled";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel_dpi: panel-dpi {
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		status = "disabled";
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel_lvds: panel-lvds {
-		compatible = "panel-lvds";
-		backlight = <&backlight>;
-		status = "disabled";
-
-		port {
-			lvds_panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "+V3.3";
-	};
-
-	reg_module_3v3_audio: regulator-module-3v3-audio {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "+V3.3_AUDIO";
-	};
-
-	reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <1800000>;
-		regulator-min-microvolt = <1800000>;
-		regulator-name = "DOVDD/DVDD_1.8V";
-		/* Note: The CSI module uses on-board 3.3V_SW supply */
-		vin-supply = <&reg_module_3v3>;
-	};
-
-	reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <2800000>;
-		regulator-min-microvolt = <2800000>;
-		regulator-name = "AVDD/AFVDD_2.8V";
-		/* Note: The CSI module uses on-board 3.3V_SW supply */
-		vin-supply = <&reg_module_3v3>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "usb_otg_vbus";
-		status = "disabled";
-	};
-
-	/* on module USB hub */
-	reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "usb_host_vbus_hub";
-		startup-delay-us = <2000>;
-		status = "okay";
-	};
-
-	reg_usb_host_vbus: regulator-usb-host-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "usb_host_vbus";
-		vin-supply = <&reg_usb_host_vbus_hub>;
-		status = "disabled";
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		audio-codec = <&codec>;
-		audio-routing =
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		model = "imx6q-apalis-sgtl5000";
-		mux-ext-port = <4>;
-		mux-int-port = <1>;
-		ssi-controller = <&ssi1>;
-	};
-
-	sound_spdif: sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-		spdif-out;
-		model = "imx-spdif";
-		status = "disabled";
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_flexcan1_default>;
-	pinctrl-1 = <&pinctrl_flexcan1_sleep>;
-	status = "disabled";
-};
-
-&can2 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_flexcan2_default>;
-	pinctrl-1 = <&pinctrl_flexcan2_sleep>;
-	status = "disabled";
-};
-
-&clks {
-	fsl,pmic-stby-poweroff;
-};
-
-/* Apalis SPI1 */
-&ecspi1 {
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "disabled";
-};
-
-/* Apalis SPI2 */
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "disabled";
-};
-
-&gpio1 {
-	gpio-line-names = "MXM3_84",
-			  "MXM3_4",
-			  "MXM3_15/GPIO7",
-			  "MXM3_96",
-			  "MXM3_37",
-			  "",
-			  "MXM3_17/GPIO8",
-			  "MXM3_14",
-			  "MXM3_12",
-			  "MXM3_2",
-			  "MXM3_184",
-			  "MXM3_180",
-			  "MXM3_178",
-			  "MXM3_176",
-			  "MXM3_188",
-			  "MXM3_186",
-			  "MXM3_160",
-			  "MXM3_162",
-			  "MXM3_150",
-			  "MXM3_144",
-			  "MXM3_154",
-			  "MXM3_146",
-			  "",
-			  "",
-			  "MXM3_72";
-};
-
-&gpio2 {
-	gpio-line-names = "MXM3_148",
-			  "MXM3_152",
-			  "MXM3_156",
-			  "MXM3_158",
-			  "MXM3_1/GPIO1",
-			  "MXM3_3/GPIO2",
-			  "MXM3_5/GPIO3",
-			  "MXM3_7/GPIO4",
-			  "MXM3_95",
-			  "MXM3_6",
-			  "MXM3_8",
-			  "MXM3_123",
-			  "MXM3_126",
-			  "MXM3_128",
-			  "MXM3_130",
-			  "MXM3_132",
-			  "MXM3_253",
-			  "MXM3_251",
-			  "MXM3_283",
-			  "MXM3_281",
-			  "MXM3_279",
-			  "MXM3_277",
-			  "MXM3_243",
-			  "MXM3_235",
-			  "MXM3_231",
-			  "MXM3_229",
-			  "MXM3_233",
-			  "MXM3_198",
-			  "MXM3_275",
-			  "MXM3_273",
-			  "MXM3_207",
-			  "MXM3_122";
-};
-
-&gpio3 {
-	gpio-line-names = "MXM3_271",
-			  "MXM3_269",
-			  "MXM3_301",
-			  "MXM3_299",
-			  "MXM3_297",
-			  "MXM3_295",
-			  "MXM3_293",
-			  "MXM3_291",
-			  "MXM3_289",
-			  "MXM3_287",
-			  "MXM3_249",
-			  "MXM3_247",
-			  "MXM3_245",
-			  "MXM3_286",
-			  "MXM3_239",
-			  "MXM3_35",
-			  "MXM3_205",
-			  "MXM3_203",
-			  "MXM3_201",
-			  "MXM3_116",
-			  "MXM3_114",
-			  "MXM3_262",
-			  "MXM3_274",
-			  "MXM3_124",
-			  "MXM3_110",
-			  "MXM3_120",
-			  "MXM3_263",
-			  "MXM3_265",
-			  "",
-			  "MXM3_135",
-			  "MXM3_261",
-			  "MXM3_259";
-};
-
-&gpio4 {
-	gpio-line-names = "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "MXM3_194",
-			  "MXM3_136",
-			  "MXM3_134",
-			  "MXM3_140",
-			  "MXM3_138",
-			  "",
-			  "MXM3_220",
-			  "",
-			  "",
-			  "MXM3_18",
-			  "MXM3_16",
-			  "",
-			  "",
-			  "MXM3_214",
-			  "MXM3_216",
-			  "MXM3_164";
-};
-
-&gpio5 {
-	gpio-line-names = "MXM3_159",
-			  "",
-			  "",
-			  "",
-			  "MXM3_257",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "MXM3_200",
-			  "MXM3_196",
-			  "MXM3_204",
-			  "MXM3_202",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "MXM3_191",
-			  "MXM3_197",
-			  "MXM3_77",
-			  "MXM3_195",
-			  "MXM3_221",
-			  "MXM3_225",
-			  "MXM3_223",
-			  "MXM3_227",
-			  "MXM3_209",
-			  "MXM3_211",
-			  "MXM3_118",
-			  "MXM3_112",
-			  "MXM3_187",
-			  "MXM3_185";
-};
-
-&gpio6 {
-	gpio-line-names = "MXM3_183",
-			  "MXM3_181",
-			  "MXM3_179",
-			  "MXM3_177",
-			  "MXM3_175",
-			  "MXM3_173",
-			  "MXM3_255",
-			  "MXM3_83",
-			  "MXM3_91",
-			  "MXM3_13/GPIO6",
-			  "MXM3_11/GPIO5",
-			  "MXM3_79",
-			  "",
-			  "",
-			  "MXM3_190",
-			  "MXM3_193",
-			  "MXM3_89";
-};
-
-&gpio7 {
-	gpio-line-names = "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "MXM3_99",
-			  "MXM3_85",
-			  "MXM3_217",
-			  "MXM3_215";
-};
-
-&gpr {
-	ipu1_csi0_mux {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		port@1 {
-			reg = <1>;
-			ipu1_csi0_mux_from_parallel_sensor: endpoint {
-				remote-endpoint = <&adv7280_to_ipu1_csi0_mux>;
-			};
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy>;
-	phy-reset-duration = <10>;
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@7 {
-			interrupt-parent = <&gpio1>;
-			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-			reg = <7>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>;
-	status = "disabled";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "disabled";
-
-	atmel_mxt_ts: touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		/* These GPIOs are muxed with the iomuxc node */
-		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;	/* MXM3_11 */
-		reg = <0x4a>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;	/* MXM3_13 */
-		status = "disabled";
-	};
-};
-
-/*
- * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
- */
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	pmic: pmic@8 {
-		compatible = "fsl,pfuze100";
-		fsl,pmic-stby-poweroff;
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1875000>;
-				regulator-min-microvolt = <300000>;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1875000>;
-				regulator-min-microvolt = <300000>;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1975000>;
-				regulator-min-microvolt = <400000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <5150000>;
-				regulator-min-microvolt = <5000000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3000000>;
-				regulator-min-microvolt = <1000000>;
-			};
-
-			vref_reg: vrefddr {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1550000>;
-				regulator-min-microvolt = <800000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1550000>;
-				regulator-min-microvolt = <800000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3300000>;
-				regulator-min-microvolt = <1800000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1800000>;
-				regulator-min-microvolt = <1800000>;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3300000>;
-				regulator-min-microvolt = <1800000>;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3300000>;
-				regulator-min-microvolt = <1800000>;
-			};
-		};
-	};
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		#sound-dai-cells = <0>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		VDDA-supply = <&reg_module_3v3_audio>;
-		VDDIO-supply = <&reg_module_3v3>;
-		VDDD-supply = <&vgen4_reg>;
-	};
-
-	/* STMPE811 touch screen controller */
-	stmpe811@41 {
-		compatible = "st,stmpe811";
-		blocks = <0x5>;
-		id = <0>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		interrupt-parent = <&gpio4>;
-		irq-trigger = <0x1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch_int>;
-		reg = <0x41>;
-		/* 3.25 MHz ADC clock speed */
-		st,adc-freq = <1>;
-		/* 12-bit ADC */
-		st,mod-12b = <1>;
-		/* internal ADC reference */
-		st,ref-sel = <0>;
-		/* ADC conversion time: 80 clocks */
-		st,sample-time = <4>;
-
-		stmpe_ts: stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			/* 8 sample average control */
-			st,ave-ctrl = <3>;
-			/* 7 length fractional part in z */
-			st,fraction-z = <7>;
-			/*
-			 * 50 mA typical 80 mA max touchscreen drivers
-			 * current limit value
-			 */
-			st,i-drive = <1>;
-			/* 1 ms panel driver settling time */
-			st,settling = <3>;
-			/* 5 ms touch detect interrupt delay */
-			st,touch-det-delay = <5>;
-			status = "disabled";
-		};
-
-		stmpe_adc: stmpe_adc {
-			compatible = "st,stmpe-adc";
-			#io-channel-cells = <1>;
-			/* forbid to use ADC channels 3-0 (touch) */
-			st,norequest-mask = <0x0F>;
-		};
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "disabled";
-
-	adv_7280: adv7280@21 {
-		compatible = "adi,adv7280";
-		adv,force-bt656-4;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_csi0>;
-		reg = <0x21>;
-		status = "disabled";
-
-		port {
-			adv7280_to_ipu1_csi0_mux: endpoint {
-				bus-width = <8>;
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-			};
-		};
-	};
-
-	ov5640_csi_cam: ov5640_mipi@3c {
-		compatible = "ovti,ov5640";
-		AVDD-supply = <&reg_ov5640_2v8_a_vdd>;
-		DOVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
-		DVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
-		clock-names = "xclk";
-		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cam_mclk>;
-		/* These GPIOs are muxed with the iomuxc node */
-		powerdown-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-		reg = <0x3c>;
-		reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-		status = "disabled";
-
-		port {
-			ov5640_to_mipi_csi2: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-				remote-endpoint = <&mipi_csi_from_ov5640>;
-			};
-		};
-	};
-};
-
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	lvds-channel@0 {
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&lvds_panel_in>;
-			};
-		};
-	};
-
-	lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-
-		port@4 {
-			reg = <4>;
-
-			lvds1_out: endpoint {
-			};
-		};
-	};
-};
-
-&mipi_csi {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "disabled";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi_from_ov5640: endpoint {
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-			remote-endpoint = <&ov5640_to_mipi_csi2>;
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "disabled";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "disabled";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	fsl,dte-mode;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart2 {
-	fsl,dte-mode;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_dte>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart4 {
-	fsl,dte-mode;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4_dte>;
-	status = "disabled";
-};
-
-&uart5 {
-	fsl,dte-mode;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5_dte>;
-	status = "disabled";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	status = "disabled";
-};
-
-/* MMC1 */
-&usdhc1 {
-	bus-width = <8>;
-	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	no-1-8-v;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
-	vqmmc-supply = <&reg_module_3v3>;
-	status = "disabled";
-};
-
-/* SD1 */
-&usdhc2 {
-	bus-width = <4>;
-	disable-wp;
-	no-1-8-v;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vqmmc-supply = <&reg_module_3v3>;
-	status = "disabled";
-};
-
-/* eMMC */
-&usdhc3 {
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_module_3v3>;
-	status = "okay";
-};
-
-&weim {
-	status = "disabled";
-};
-
-&iomuxc {
-	/* Mux the Apalis GPIOs */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-
-	pinctrl_apalis_gpio1: apalisgpio1grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio2: apalisgpio2grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio3: apalisgpio3grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio4: apalisgpio4grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio5: apalisgpio5grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio6: apalisgpio6grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio7: apalisgpio7grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio8: apalisgpio8grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
-		>;
-	};
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
-			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
-			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
-			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-		>;
-	};
-
-	pinctrl_cam_mclk: cammclkgrp {
-		fsl,pins = <
-			/* CAM sys_mclk */
-			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
-			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
-			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
-			/* SPI1 cs */
-			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-			/* SPI2 cs */
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			/* Ethernet PHY reset */
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
-			/* Ethernet PHY interrupt */
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x000b1
-		>;
-	};
-
-	pinctrl_flexcan1_default: flexcan1defgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan1_sleep: flexcan1slpgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0
-		>;
-	};
-
-	pinctrl_flexcan2_default: flexcan2defgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
-		>;
-	};
-	pinctrl_flexcan2_sleep: flexcan2slpgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0
-		>;
-	};
-
-	pinctrl_gpio_bl_on: gpioblongrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_keys: gpio1io04grp {
-		fsl,pins = <
-			/* Power button */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
-		>;
-	};
-
-	pinctrl_hdmi_cec: hdmicecgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-		>;
-	};
-
-	pinctrl_hdmi_ddc: hdmiddcgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
-			MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0xb0b1
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0xb0b1
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0xb0b1
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0xb0b1
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0xb0b1
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0xb0b1
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0xb0b1
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0xb0b1
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
-			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0xb0b1
-			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0xb0b1
-		>;
-	};
-
-	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
-			/* DE */
-			MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61
-			/* HSync */
-			MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61
-			/* VSync */
-			MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61
-			MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
-			MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
-			MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
-			MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
-			MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
-			MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
-			MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
-			MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
-			MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
-			MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
-			MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
-			MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
-			MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
-			MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
-			MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
-			MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
-			MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
-			MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
-			MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
-			MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
-			MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
-			MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
-			MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
-			MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
-		>;
-	};
-
-	pinctrl_ipu2_vdac: ipu2vdacgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
-			MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0xd1
-			MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0xd1
-			MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0xd1
-			MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0xf9
-			MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0xf9
-			MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0xf9
-			MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0xf9
-			MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0xf9
-			MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0xf9
-			MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0xf9
-			MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0xf9
-			MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0xf9
-			MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0xf9
-			MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0xf9
-			MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0xf9
-			MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0xf9
-			MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0xf9
-			MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0xf9
-			MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0xf9
-		>;
-	};
-
-	pinctrl_mmc_cd: mmccdgrp {
-		fsl,pins = <
-			 /* MMC1 CD */
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_regulator_usbh_pwr: regusbhpwrgrp {
-		fsl,pins = <
-			/* USBH_EN */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
-		>;
-	};
-
-	pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp {
-		fsl,pins = <
-			/* USBH_HUB_EN */
-			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
-		>;
-	};
-
-	pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp {
-		fsl,pins = <
-			/* USBO1 power en */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
-		>;
-	};
-
-	pinctrl_reset_moci: resetmocigrp {
-		fsl,pins = <
-			/* RESET_MOCI control */
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
-		>;
-	};
-
-	pinctrl_sd_cd: sdcdgrp {
-		fsl,pins = <
-			/* SD1 CD */
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
-		>;
-	};
-
-	pinctrl_sgtl5000: sgtl5000grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
-		>;
-	};
-
-	pinctrl_spdif: spdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
-			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
-		>;
-	};
-
-	pinctrl_touch_int: touchintgrp {
-		fsl,pins = <
-			/* STMPE811 interrupt */
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
-		>;
-	};
-
-	/* Additional DTR, DSR, DCD */
-	pinctrl_uart1_ctrl: uart1ctrlgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
-			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
-			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1_dce: uart1dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart1_dte: uart1dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2_dce: uart2dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart2_dte: uart2dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4_dce: uart4dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart4_dte: uart4dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5_dce: uart5dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart5_dte: uart5dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_4bit: usdhc1-4bitgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
-		>;
-	};
-
-	pinctrl_usdhc1_8bit: usdhc1-8bitgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
-			MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
-			MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
-			MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17071
-			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10071
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
deleted file mode 100644
index b78ed7974ea95..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2015 Armadeus Systems <support@armadeus.com>
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		vin-supply = <&reg_3p3v>;
-	};
-
-	usdhc1_pwrseq: usdhc1-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <15>;
-		power-off-delay-us = <70>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-duration = <10>;
-	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
-			status = "okay";
-		};
-	};
-};
-
-/* Bluetooth */
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* Wi-Fi */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <4>;
-	mmc-pwrseq = <&usdhc1_pwrseq>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_1p8v>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	non-removable;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-		tcxo-clock-frequency = <38400000>;
-	};
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x130b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x13030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1f030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1f030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b0
-			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b0
-			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b0
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b0
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x130b0 /* BT_EN */
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17059
-			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10059
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17059
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17059
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17059
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17059
-			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08	0x130b0 /* WL_EN */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x130b0 /* WL_IRQ */
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
deleted file mode 100644
index 2577eb4f535a1..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ /dev/null
@@ -1,451 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2015 Armadeus Systems <support@armadeus.com>
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 191000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <0>;
-		power-supply = <&reg_5v>;
-	};
-
-	disp0 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_disp0>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		user-button {
-			label = "User button";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		user-led {
-			label = "User LED";
-			gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "on";
-		};
-	};
-
-	panel {
-		compatible = "armadeus,st0700-adapt";
-		power-supply = <&reg_3p3v>;
-		backlight = <&backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&reg_5v>;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "fsl,imx6-armadeus-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6-armadeus-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
-		   <&gpio4 10 GPIO_ACTIVE_LOW>,
-		   <&gpio4 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	touchscreen@48 {
-		compatible = "semtech,sx8654";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreen>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	rtc@6f {
-		compatible = "microchip,mcp7940x";
-		reg = <0x6f>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display_in>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-/* GPS */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-/* GSM */
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* console */
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_5v>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	vbus-supply = <&reg_usb_otg_vbus>;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-/* microSD */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpios>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
-			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
-			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
-			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09  0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10  0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_keys: gpiokeysgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0
-		>;
-	};
-
-	pinctrl_gpios: gpiosgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x100b1
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x100b1
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x100b1
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x100b1
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x100b1
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x100b1
-		>;
-	};
-
-	pinctrl_gsm: gsmgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x130b0 /* GSM_POKIN */
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_disp0: ipu1disp0grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x100b1
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x100b1
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x100b1
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x100b1
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x100b1
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x100b1
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x100b1
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x100b1
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x100b1
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x100b1
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x100b1
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x100b1
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x100b1
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x100b1
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x100b1
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x100b1
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x100b1
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x100b1
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x100b1
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x100b1
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x100b1
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x100b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b0
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0
-			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b0
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-		>;
-	};
-
-	pinctrl_spdif: spdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
-		>;
-	};
-
-	pinctrl_touchscreen: touchscreengrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
deleted file mode 100644
index baa197c90060e..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * support fot the imx6 based aristainetos board
- *
- * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbotg_vbus: regulator-usbotg-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	tmp103: tmp103@71 {
-		compatible = "ti,tmp103";
-		reg = <0x71>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	rtc@68 {
-		compatible = "dallas,m41t00";
-		reg = <0x68>;
-	};
-};
-
-&ecspi4 {
-	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usbotg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>;
-
-	imx6qdl-aristainetos {
-		pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>;
-		};
-
-		pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
-			>;
-		};
-
-		pinctrl_backlight: backlightgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b0
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
-				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-				MX6QDL_PAD_EIM_D24__GPIO3_IO24  0x100b1
-			>;
-		};
-
-		pinctrl_ecspi4: ecspi4grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-				MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-				MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20  0x100b1
-				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO  0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC    0x1b0b0
-				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN   0x1b0b0
-				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER   0x1b0b0
-				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
-				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN  0x1b0b0
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
-				MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
-				>;
-		};
-
-		pinctrl_gpio: gpiogrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0
-				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
-				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
-				MX6QDL_PAD_SD4_DAT5__GPIO2_IO13	0x1b0b0
-				MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x10
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_ipu_disp: ipudisp1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
-				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20			0x20000
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
-				>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-				MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
deleted file mode 100644
index 6b64b2fc3995b..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ /dev/null
@@ -1,637 +0,0 @@
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/imx6qdl-clock.h>
-
-/ {
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbotg_vbus: regulator-usbotg-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW
-		    &gpio4 10 GPIO_ACTIVE_LOW
-		    &gpio4 11 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW &gpio2 27 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&ecspi4 {
-	cs-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio5 2 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	status = "okay";
-
-	flash: flash@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <1>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic@58 {
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <04 0x8>;
-
-		regulators {
-			bcore1 {
-				regulator-name = "bcore1";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			bcore2 {
-				regulator-name = "bcore2";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			bpro {
-				regulator-name = "bpro";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			bperi {
-				regulator-name = "bperi";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			bmem {
-				regulator-name = "bmem";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo2 {
-				regulator-name = "ldo2";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo3 {
-				regulator-name = "ldo3";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo4 {
-				regulator-name = "ldo4";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo5 {
-				regulator-name = "ldo5";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo6 {
-				regulator-name = "ldo6";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo7 {
-				regulator-name = "ldo7";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo8 {
-				regulator-name = "ldo8";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo9 {
-				regulator-name = "ldo9";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo10 {
-				regulator-name = "ldo10";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo11 {
-				regulator-name = "ldo11";
-				regulator-always-on;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			bio {
-				regulator-name = "bio";
-				regulator-always-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-		};
-	};
-
-	tmp103: tmp103@71 {
-		compatible = "ti,tmp103";
-		reg = <0x71>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	expander: tca6416@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	rtc@68 {
-		compatible = "dallas,m41t00";
-		reg = <0x68>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	eeprom@50{
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	eeprom@57{
-		compatible = "atmel,24c64";
-		reg = <0x57>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&pcie {
-	reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usbotg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio>;
-
-	pinctrl_audmux: audmux {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
-			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26   0x100b1 /* SS0# */
-			MX6QDL_PAD_EIM_LBA__GPIO2_IO27  0x100b1 /* SS1# */
-		>;
-	};
-
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-			MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x100b1 /* SS0# */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02  0x100b1 /* SS1# */
-			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
-			MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
-			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio: gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0 /* led enable */
-			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* LCD power enable */
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0 /* led yellow */
-			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0 /* led red */
-			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b0 /* led green */
-			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0 /* led blue */
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0 /* Profibus IRQ */
-			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0 /* FPGA IRQ */
-			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b0 /* spi bus #2 SS driver enable */
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b0b0 /* USB_OTG_ID = GPIO1_24*/
-			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0 /* Touchscreen IRQ */
-			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b0 /* PCIe reset */
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpmi-nand {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
-			MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x1b0b0 /* backlight enable */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D31__UART3_RTS_B	  0x1b0b1
-			MX6QDL_PAD_EIM_D23__UART3_CTS_B	  0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-		>;
-	};
-
-	pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
-		fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
-	};
-
-	pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
-		fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0 /* SD1 card detect input */
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0 /* SD1 write protect input */
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x71
-			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x71
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b0 /* SD2 level shifter output enable */
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0 /* SD2 card detect input */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10		0x1b0b0 /* SD2 write protect input */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
deleted file mode 100644
index 5709957075044..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ /dev/null
@@ -1,1309 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2014-2022 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Toradex Colibri iMX6DL/S Module";
-	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 45 63 88 119 158 203 255>;
-		default-brightness-level = <4>;
-		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		power-supply = <&reg_module_3v3>;
-		pwms = <&pwm3 0 5000000 PWM_POLARITY_INVERTED>;
-		status = "disabled";
-	};
-
-	extcon_usbc_det: usbc-det {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbc_det>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		key-wakeup {
-			debounce-interval = <10>;
-			gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
-			label = "Wake-Up";
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "disabled";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	panel_dpi: panel-dpi {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-		status = "disabled";
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_module_3v3_audio: regulator-module-3v3-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_host_vbus: regulator-usb-host-vbus {
-		compatible = "regulator-fixed";
-		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "usb_host_vbus";
-		status = "disabled";
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HP_OUT",
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias";
-		model = "imx6dl-colibri-sgtl5000";
-		mux-int-port = <1>;
-		mux-ext-port = <5>;
-		ssi-controller = <&ssi1>;
-	};
-
-	/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
-	sound_spdif: sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-		spdif-out;
-		model = "imx-spdif";
-		status = "disabled";
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>;
-	status = "okay";
-};
-
-/* Optional on SODIMM 55/63 */
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-/* Optional on SODIMM 178/188 */
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
-};
-
-&clks {
-	fsl,pmic-stby-poweroff;
-};
-
-/* Colibri SSP */
-&ecspi4 {
-	cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	status = "disabled";
-};
-
-&fec {
-	phy-mode = "rmii";
-	phy-handle = <&ethphy>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@0 {
-			reg = <0>;
-			micrel,led-mode = <0>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names = "",
-			  "SODIMM_67",
-			  "SODIMM_180",
-			  "SODIMM_196",
-			  "SODIMM_174",
-			  "SODIMM_176",
-			  "SODIMM_194",
-			  "SODIMM_55",
-			  "SODIMM_63",
-			  "SODIMM_28",
-			  "SODIMM_93",
-			  "SODIMM_69",
-			  "SODIMM_99",
-			  "SODIMM_130",
-			  "SODIMM_106",
-			  "SODIMM_98",
-			  "SODIMM_192",
-			  "SODIMM_49",
-			  "SODIMM_190",
-			  "SODIMM_51",
-			  "SODIMM_47",
-			  "SODIMM_53",
-			  "",
-			  "SODIMM_22";
-};
-
-&gpio2 {
-	gpio-line-names = "SODIMM_132",
-			  "SODIMM_134",
-			  "SODIMM_135",
-			  "SODIMM_133",
-			  "SODIMM_102",
-			  "SODIMM_43",
-			  "SODIMM_127",
-			  "SODIMM_37",
-			  "SODIMM_104",
-			  "SODIMM_59",
-			  "SODIMM_30",
-			  "SODIMM_100",
-			  "SODIMM_38",
-			  "SODIMM_34",
-			  "SODIMM_32",
-			  "SODIMM_36",
-			  "SODIMM_59",
-			  "SODIMM_67",
-			  "SODIMM_97",
-			  "SODIMM_79",
-			  "SODIMM_103",
-			  "SODIMM_101",
-			  "SODIMM_45",
-			  "SODIMM_105",
-			  "SODIMM_107",
-			  "SODIMM_91",
-			  "SODIMM_89",
-			  "SODIMM_150",
-			  "SODIMM_126",
-			  "SODIMM_128",
-			  "",
-			  "SODIMM_94";
-};
-
-&gpio3 {
-	gpio-line-names = "SODIMM_111",
-			  "SODIMM_113",
-			  "SODIMM_115",
-			  "SODIMM_117",
-			  "SODIMM_119",
-			  "SODIMM_121",
-			  "SODIMM_123",
-			  "SODIMM_125",
-			  "SODIMM_110",
-			  "SODIMM_112",
-			  "SODIMM_114",
-			  "SODIMM_116",
-			  "SODIMM_118",
-			  "SODIMM_120",
-			  "SODIMM_122",
-			  "SODIMM_124",
-			  "",
-			  "SODIMM_96",
-			  "SODIMM_77",
-			  "SODIMM_25",
-			  "SODIMM_27",
-			  "SODIMM_88",
-			  "SODIMM_90",
-			  "SODIMM_31",
-			  "SODIMM_23",
-			  "SODIMM_29",
-			  "SODIMM_71",
-			  "SODIMM_73",
-			  "SODIMM_92",
-			  "SODIMM_81",
-			  "SODIMM_131",
-			  "SODIMM_129";
-};
-
-&gpio4 {
-	gpio-line-names = "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_168",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_184",
-			  "SODIMM_186",
-			  "HDMI_15",
-			  "HDMI_16",
-			  "SODIMM_178",
-			  "SODIMM_188",
-			  "SODIMM_56",
-			  "SODIMM_44",
-			  "SODIMM_68",
-			  "SODIMM_82",
-			  "SODIMM_24",
-			  "SODIMM_76",
-			  "SODIMM_70",
-			  "SODIMM_60",
-			  "SODIMM_58",
-			  "SODIMM_78",
-			  "SODIMM_72",
-			  "SODIMM_80",
-			  "SODIMM_46",
-			  "SODIMM_62",
-			  "SODIMM_48",
-			  "SODIMM_74";
-};
-
-&gpio5 {
-	gpio-line-names = "SODIMM_95",
-			  "",
-			  "SODIMM_86",
-			  "",
-			  "SODIMM_65",
-			  "SODIMM_50",
-			  "SODIMM_52",
-			  "SODIMM_54",
-			  "SODIMM_66",
-			  "SODIMM_64",
-			  "SODIMM_57",
-			  "SODIMM_61",
-			  "SODIMM_136",
-			  "SODIMM_138",
-			  "SODIMM_140",
-			  "SODIMM_142",
-			  "SODIMM_144",
-			  "SODIMM_146",
-			  "SODIMM_172",
-			  "SODIMM_170",
-			  "SODIMM_149",
-			  "SODIMM_151",
-			  "SODIMM_153",
-			  "SODIMM_155",
-			  "SODIMM_157",
-			  "SODIMM_159",
-			  "SODIMM_161",
-			  "SODIMM_163",
-			  "SODIMM_33",
-			  "SODIMM_35",
-			  "SODIMM_165",
-			  "SODIMM_167";
-};
-
-&gpio6 {
-	gpio-line-names = "SODIMM_169",
-			  "SODIMM_171",
-			  "SODIMM_173",
-			  "SODIMM_175",
-			  "SODIMM_177",
-			  "SODIMM_179",
-			  "SODIMM_85",
-			  "SODIMM_166",
-			  "SODIMM_160",
-			  "SODIMM_162",
-			  "SODIMM_158",
-			  "SODIMM_164",
-			  "",
-			  "",
-			  "SODIMM_156",
-			  "SODIMM_75",
-			  "SODIMM_154",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_152";
-};
-
-&gpio7 {
-	gpio-line-names = "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_19",
-			  "SODIMM_21",
-			  "",
-			  "SODIMM_137";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_ddc>;
-	status = "disabled";
-};
-
-/*
- * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
- */
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	pmic: pmic@8 {
-		compatible = "fsl,pfuze100";
-		fsl,pmic-stby-poweroff;
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1875000>;
-				regulator-min-microvolt = <300000>;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1875000>;
-				regulator-min-microvolt = <300000>;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1975000>;
-				regulator-min-microvolt = <400000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <5150000>;
-				regulator-min-microvolt = <5000000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3000000>;
-				regulator-min-microvolt = <1000000>;
-			};
-
-			vref_reg: vrefddr {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* vgen1: unused */
-
-			vgen2_reg: vgen2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1550000>;
-				regulator-min-microvolt = <800000>;
-			};
-
-			/*
-			 * +V3.3_1.8_SD1 coming off VGEN3 and supplying
-			 * the i.MX 6 NVCC_SD1.
-			 */
-			vgen3_reg: vgen3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3300000>;
-				regulator-min-microvolt = <1800000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1800000>;
-				regulator-min-microvolt = <1800000>;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3300000>;
-				regulator-min-microvolt = <1800000>;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3300000>;
-				regulator-min-microvolt = <1800000>;
-			};
-		};
-	};
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		lrclk-strength = <3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_module_3v3_audio>;
-		VDDIO-supply = <&reg_module_3v3>;
-		VDDD-supply = <&vgen4_reg>;
-	};
-
-	/* STMPE811 touch screen controller */
-	stmpe811@41 {
-		compatible = "st,stmpe811";
-		blocks = <0x5>;
-		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio6>;
-		interrupt-controller;
-		id = <0>;
-		irq-trigger = <0x1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch_int>;
-		reg = <0x41>;
-		/* 3.25 MHz ADC clock speed */
-		st,adc-freq = <1>;
-		/* 12-bit ADC */
-		st,mod-12b = <1>;
-		/* internal ADC reference */
-		st,ref-sel = <0>;
-		/* ADC converstion time: 80 clocks */
-		st,sample-time = <4>;
-
-		stmpe_ts: stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			/* 8 sample average control */
-			st,ave-ctrl = <3>;
-			/* 7 length fractional part in z */
-			st,fraction-z = <7>;
-			/*
-			 * 50 mA typical 80 mA max touchscreen drivers
-			 * current limit value
-			 */
-			st,i-drive = <1>;
-			/* 1 ms panel driver settling time */
-			st,settling = <3>;
-			/* 5 ms touch detect interrupt delay */
-			st,touch-det-delay = <5>;
-			status = "disabled";
-		};
-
-		stmpe_adc: stmpe_adc {
-			compatible = "st,stmpe-adc";
-			/* forbid to use ADC channels 3-0 (touch) */
-			st,norequest-mask = <0x0F>;
-		};
-	};
-};
-
-/*
- * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
- */
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "disabled";
-
-	atmel_mxt_ts: touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		interrupt-parent = <&gpio2>;
-		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_atmel_conn>;
-		reg = <0x4a>;
-		reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
-		status = "disabled";
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-/* Colibri PWM<B> */
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "disabled";
-};
-
-/* Colibri PWM<D> */
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "disabled";
-};
-
-/* Colibri PWM<A> */
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "disabled";
-};
-
-/* Colibri PWM<C> */
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "disabled";
-};
-
-/* Optional S/PDIF out on SODIMM 137 */
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-/* Colibri UART_A */
-&uart1 {
-	fsl,dte-mode;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-/* Colibri UART_B */
-&uart2 {
-	fsl,dte-mode;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_dte>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-/* Colibri UART_C */
-&uart3 {
-	fsl,dte-mode;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_dte>;
-	status = "disabled";
-};
-
-/* Colibri USBH */
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-};
-
-/* Colibri USBC */
-&usbotg {
-	dr_mode = "otg";
-	extcon = <0>, <&extcon_usbc_det>;
-	status = "disabled";
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
-	bus-width = <4>;
-	no-1-8-v;
-	disable-wp;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
-	pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_mmc_cd_sleep>;
-	vmmc-supply = <&reg_module_3v3>;
-	vqmmc-supply = <&vgen3_reg>;
-	status = "disabled";
-};
-
-/* eMMC */
-&usdhc3 {
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_module_3v3>;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim_sram  &pinctrl_weim_cs0
-		     &pinctrl_weim_cs1   &pinctrl_weim_cs2
-		     &pinctrl_weim_rdnwr &pinctrl_weim_npwe>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh_oc_1>;
-
-	/* Atmel MXT touchsceen + Capacitive Touch Adapter */
-	/* NOTE: This pin group conflicts with pin groups
-	 * pinctrl_pwm1/pinctrl_pwm4. Don't use them simultaneously.
-	 */
-	pinctrl_atmel_adap: atmeladaptergrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09   0xb0b1  /* SODIMM  28 */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0xb0b1  /* SODIMM  30 */
-		>;
-	};
-
-	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
-	/* NOTE: This pin group conflicts with pin groups pinctrl_weim_cs1 and
-	 * pinctrl_weim_cs2. Don't use them simultaneously.
-	 */
-	pinctrl_atmel_conn: atmelconnectorgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24  0xb0b1  /* SODIMM_107 */
-			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0xb0b1  /* SODIMM_106 */
-		>;
-	};
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
-			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
-			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
-			MX6QDL_PAD_KEY_ROW1__AUD5_RXD	0x130b0
-		>;
-	};
-
-	pinctrl_cam_mclk: cammclkgrp {
-		fsl,pins = <
-			/* Parallel Camera CAM sys_mclk */
-			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2	0x00b0
-		>;
-	};
-
-	/* CSI pins used as GPIOs */
-	pinctrl_csi_gpio_1: csigpio1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D18__GPIO3_IO18   0x1b0b0
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x1b0b0
-			MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x130b0
-			MX6QDL_PAD_EIM_A23__GPIO6_IO06   0x1b0b0
-			MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x1b0b0
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21   0x1b0b0
-			MX6QDL_PAD_EIM_A18__GPIO2_IO20   0x1b0b0
-			MX6QDL_PAD_EIM_EB3__GPIO2_IO31   0x1b0b0
-			MX6QDL_PAD_EIM_D17__GPIO3_IO17   0x1b0b0
-			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
-			MX6QDL_PAD_SD2_CMD__GPIO1_IO11   0x1b0b0
-			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15  0x1b0b0
-		>;
-	};
-
-	pinctrl_csi_gpio_2: csigpio2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A24__GPIO5_IO04   0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			/* SPI CS */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
-			MX6QDL_PAD_EIM_D22__ECSPI4_MISO	0x100b1
-			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI	0x100b1
-			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	((1<<30) | 0x1b0b0)
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_1: gpio1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20     0x1b0b0
-			MX6QDL_PAD_EIM_D27__GPIO3_IO27      0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03     0x1b0b0
-			MX6QDL_PAD_NANDF_D4__GPIO2_IO04     0x1b0b0
-			MX6QDL_PAD_NANDF_D6__GPIO2_IO06     0x1b0b0
-			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08     0x1b0b0
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11     0x1b0b0
-		>;
-	};
-	pinctrl_gpio_2: gpio2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07       0x1b0b0
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08       0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_bl_on: gpioblongrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_keys: gpiokeysgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x130b0
-		>;
-	};
-
-	pinctrl_hdmi_ddc: hdmiddcgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
-			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12	0xb0b1
-			MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13	0xb0b1
-			MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14	0xb0b1
-			MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15	0xb0b1
-			MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16	0xb0b1
-			MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17	0xb0b1
-			MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18	0xb0b1
-			MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19	0xb0b1
-			MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK	0xb0b1
-			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC	0xb0b1
-			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC	0xb0b1
-			/* Disable PWM pins on camera interface */
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x40
-			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
-		>;
-	};
-
-	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0xa1
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0xa1
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0xa1
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0xa1
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0xa1
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0xa1
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0xa1
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0xa1
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0xa1
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0xa1
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0xa1
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0xa1
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0xa1
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0xa1
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0xa1
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0xa1
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0xa1
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0xa1
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0xa1
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0xa1
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0xa1
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0xa1
-		>;
-	};
-
-	pinctrl_lvds_transceiver: lvdstxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x03030 /* SODIMM  95 */
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07   0x0b030 /* SODIMM  55 */
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x03030 /* SODIMM  63 */
-			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x03030 /* SODIMM  99 */
-		>;
-	};
-
-	pinctrl_mic_gnd: micgndgrp {
-		fsl,pins = <
-			/* Controls Mic GND, PU or '1' pull Mic GND to GND */
-			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
-		>;
-	};
-
-	pinctrl_mmc_cd: mmccdgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x1b0b1
-		>;
-	};
-
-	pinctrl_mmc_cd_sleep: mmccdslpgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x00040
-			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x00040
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT2__PWM4_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
-		fsl,pins = <
-			/* SODIMM 129 / USBH_PEN */
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
-		>;
-	};
-
-	pinctrl_sgtl5000: sgtl5000grp {
-		fsl,pins = <
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
-		>;
-	};
-
-	pinctrl_spdif: spdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
-		>;
-	};
-
-	pinctrl_touch_int: gpiotouchintgrp {
-		fsl,pins = <
-			/* STMPE811 interrupt */
-			MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1_dce: uart1dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart1_dte: uart1dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
-		>;
-	};
-
-	/* Additional DTR, DSR, DCD */
-	pinctrl_uart1_ctrl: uart1ctrlgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
-			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
-			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart2_dte: uart2dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3_dte: uart3dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CLK__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_CMD__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbc_det: usbcdetgrp {
-		fsl,pins = <
-			/* SODIMM 137 / USBC_DET */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
-			/* USBC_DET_OVERWRITE */
-			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
-			/* USBC_DET_EN */
-			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
-		>;
-	};
-
-	pinctrl_usbc_id_1: usbcid1grp {
-		fsl,pins = <
-			/* USBC_ID */
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-		>;
-	};
-
-	pinctrl_usbh_oc_1: usbhoc1grp {
-		fsl,pins = <
-			/* USBH_OC */
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
-			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
-		>;
-	};
-
-	/* avoid backfeeding with removed card power */
-	pinctrl_usdhc1_sleep: usdhc1sleepgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x3000
-			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x3000
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x3000
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x3000
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x3000
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x3000
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET	0x17059
-		>;
-	};
-
-	pinctrl_weim_cs0: weimcs0grp {
-		fsl,pins = <
-			/* nEXT_CS0 */
-			MX6QDL_PAD_EIM_CS0__EIM_CS0_B	0xb0b1
-		>;
-	};
-
-	pinctrl_weim_cs1: weimcs1grp {
-		fsl,pins = <
-			/* nEXT_CS1 */
-			MX6QDL_PAD_EIM_CS1__EIM_CS1_B	0xb0b1
-		>;
-	};
-
-	pinctrl_weim_cs2: weimcs2grp {
-		fsl,pins = <
-			/* nEXT_CS2 */
-			MX6QDL_PAD_SD2_DAT1__EIM_CS2_B	0xb0b1
-		>;
-	};
-
-	/* ADDRESS[16:18] [25] used as GPIO */
-	pinctrl_weim_gpio_1: weimgpio1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-		>;
-	};
-
-	/* ADDRESS[19:24] used as GPIO */
-	pinctrl_weim_gpio_2: weimgpio2grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-		>;
-	};
-
-	/* DATA[16:31] used as GPIO */
-	pinctrl_weim_gpio_3: weimgpio3grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
-			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b0
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b0
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
-			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x1b0b0
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
-			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
-			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
-		>;
-	};
-
-	/* DQM[0:3] used as GPIO */
-	pinctrl_weim_gpio_4: weimgpio4grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
-			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
-		>;
-	};
-
-	/* RDY used as GPIO */
-	pinctrl_weim_gpio_5: weimgpio5grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0
-		>;
-	};
-
-	/* ADDRESS[16] DATA[30] used as GPIO */
-	pinctrl_weim_gpio_6: weimgpio6grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-		>;
-	};
-
-	pinctrl_weim_npwe: weimnpwegrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
-			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
-		>;
-	};
-
-	pinctrl_weim_sram: weimsramgrp {
-		fsl,pins = <
-			/* Data */
-			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
-			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
-			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
-			/* Address */
-			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
-			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
-			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
-			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
-			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
-			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
-			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
-			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
-			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
-			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
-			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
-			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
-			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
-			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
-			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
-			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
-			/* Ctrl */
-			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
-			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
-		>;
-	};
-
-	pinctrl_weim_rdnwr: weimrdnwrgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
-			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
deleted file mode 100644
index 1e530d892b768..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Copyright (C) 2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 9 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_ir>;
-	};
-
-	led-controller {
-		compatible = "pwm-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
-
-		led-1 {
-			active-low;
-			label = "imx6:red:front";
-			max-brightness = <248>;
-			pwms = <&pwm1 0 50000>;
-		};
-	};
-
-	v_5v0: regulator-v-5v0 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_5v0";
-	};
-
-	v_usb2: regulator-v-usb2 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb2";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb1: regulator-v-usb1 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb1";
-		vin-supply = <&v_5v0>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "Integrated SPDIF";
-		/* IMX6 doesn't implement this yet */
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pinctrl_gpio_key>;
-		pinctrl-names = "default";
-
-		button_0 {
-			label = "Button 0";
-			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
-
-	status = "okay";
-
-	rtc@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	cubox_i {
-		pinctrl_cubox_i_hdmi: cubox-i-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_cubox_i_ir: cubox-i-ir {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
-			>;
-		};
-
-		pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
-			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
-		};
-
-		pinctrl_cubox_i_spdif: cubox-i-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
-		};
-
-		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
-			fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
-		};
-
-		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
-		};
-
-		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
-			/*
-			 * The Cubox-i pulls ID low, but as it's pointless
-			 * leaving it as a pull-up, even if it is just 10uA.
-			 */
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
-			>;
-		};
-
-		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
-		};
-
-		pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
-			>;
-		};
-
-		pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-
-		pinctrl_gpio_key: gpio-key {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x17059
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
-	vbus-supply = <&v_usb2>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
-	vbus-supply = <&v_usb1>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
-	vmmc-supply = <&vcc_3v3>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&vcc_3v3 {
-	vin-supply = <&v_5v0>;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
deleted file mode 100644
index 2c1d6f28e6950..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ /dev/null
@@ -1,201 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dummy_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "dummy-supply";
-		};
-
-		reg_usb_otg_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "sst,sst25vf040b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	status = "okay";
-	phy-mode = "rgmii";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-dfi-fs700-m60 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
-				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
-				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
-			>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc2 { /* module slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc3 { /* baseboard slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-};
-
-&usdhc4 { /* eMMC */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
deleted file mode 100644
index 702cd4a1b2e61..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2021 DH electronics GmbH
- */
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-/*
- * Special SoM hardware required which uses the pins from micro SD card. The
- * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can2
- * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. Therefore the micro SD
- * card must be disabled and the uart1 rts/cts must be output on other DHCOM
- * pins, see uart1 and usdhc3 node below.
- */
-&can2 {
-	status = "okay";
-};
-
-&gpio1 {
-	/*
-	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
-	 * GPIO line, however the i.MX6 UART driver assumes RX happens
-	 * during TX anyway and that it only controls drive enable DE
-	 * line. Hence, the RX is always enabled here.
-	 */
-	rs485-rx-en-hog {
-		gpio-hog;
-		gpios = <18 0>; /* GPIO Q */
-		line-name = "rs485-rx-en";
-		output-low;
-	};
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "DRC02-In1", "", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "DHCOM-E", "DRC02-In2", "DHCOM-H",
-		"DHCOM-I", "DRC02-HW0", "", "", "", "", "", "",
-		"", "", "", "", "DRC02-Out1", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"", "", "", "DRC02-Out2", "", "", "SOM-HW1", "",
-		"", "", "", "", "", "", "DRC02-HW2", "DRC02-HW1",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&i2c1 {
-	eeprom@50 {
-		compatible = "atmel,24c04";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-&uart1 {
-	/*
-	 * Due to the use of can2 the signals for can2 Tx and Rx are routed to
-	 * DHCOM UART1 rts/cts pins. Therefore this UART have to use DHCOM GPIOs
-	 * for rts/cts. So configure DHCOM GPIO I as rts and GPIO M as cts.
-	 */
-	/delete-property/ uart-has-rtscts;
-	cts-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; /* GPIO M */
-	pinctrl-0 = <&pinctrl_uart1 &pinctrl_dhcom_i &pinctrl_dhcom_m>;
-	pinctrl-names = "default";
-	rts-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
-};
-
-&uart5 {
-	/*
-	 * On DRC02 this UART is used as RS485 interface and RS485_TX_En is
-	 * controlled by DHCOM GPIO P. So remove rts/cts pins and the property
-	 * uart-has-rtscts from this UART and add the DHCOM GPIO P pin via
-	 * rts-gpios. The RS485_RX_En is controlled by DHCOM GPIO Q, see gpio1
-	 * node above.
-	 */
-	/delete-property/ uart-has-rtscts;
-	linux,rs485-enabled-at-boot-time;
-	pinctrl-0 = <&pinctrl_uart5_core &pinctrl_dhcom_p &pinctrl_dhcom_q>;
-	pinctrl-names = "default";
-	rts-gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; /* GPIO P */
-};
-
-&usbh1 {
-	disable-over-current;
-};
-
-&usdhc2 { /* SD card */
-	status = "okay";
-};
-
-&usdhc3 {
-	/*
-	 * Due to the use of can2 the micro SD card on module have to be
-	 * disabled, because the pins SD3_DAT0 and SD3_DAT1 are muxed as
-	 * can2 Tx and Rx.
-	 */
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl-0 = <
-			/*
-			 * The following DHCOM GPIOs are used on this board.
-			 * Therefore, they have been removed from the list below.
-			 * I: uart1 rts
-			 * M: uart1 cts
-			 * P: uart5 rs485-tx-en
-			 * Q: uart5 rs485-rx-en
-			 */
-			&pinctrl_hog_base
-			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
-			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
-			&pinctrl_dhcom_g &pinctrl_dhcom_h
-			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
-			&pinctrl_dhcom_n &pinctrl_dhcom_o
-			&pinctrl_dhcom_r
-			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
-			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
-		>;
-	pinctrl-names = "default";
-
-	pinctrl_uart5_core: uart5-core-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
deleted file mode 100644
index 6248b126b5578..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
+++ /dev/null
@@ -1,335 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2015-2021 DH electronics GmbH
- * Copyright (C) 2018 Marek Vasut <marex@denx.de>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	clk_ext_audio_codec: clock-codec {
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		compatible = "fixed-clock";
-	};
-
-	display_bl: display-bl {
-		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
-		compatible = "pwm-backlight";
-		default-brightness-level = <8>;
-		enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
-		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
-		status = "okay";
-	};
-
-	lcd_display: disp0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif &pinctrl_dhcom_g>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	gpio-keys {
-		#size-cells = <0>;
-		compatible = "gpio-keys";
-
-		button-0 {
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* GPIO A */
-			label = "TA1-GPIO-A";
-			linux,code = <KEY_A>;
-			pinctrl-0 = <&pinctrl_dhcom_a>;
-			pinctrl-names = "default";
-			wakeup-source;
-		};
-
-		button-1 {
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* GPIO B */
-			label = "TA2-GPIO-B";
-			linux,code = <KEY_B>;
-			pinctrl-0 = <&pinctrl_dhcom_b>;
-			pinctrl-names = "default";
-			wakeup-source;
-		};
-
-		button-2 {
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; /* GPIO C */
-			label = "TA3-GPIO-C";
-			linux,code = <KEY_C>;
-			pinctrl-0 = <&pinctrl_dhcom_c>;
-			pinctrl-names = "default";
-			wakeup-source;
-		};
-
-		button-3 {
-			gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; /* GPIO D */
-			label = "TA4-GPIO-D";
-			linux,code = <KEY_D>;
-			pinctrl-0 = <&pinctrl_dhcom_d>;
-			pinctrl-names = "default";
-			wakeup-source;
-		};
-	};
-
-	led {
-		compatible = "gpio-leds";
-
-		/*
-		 * Disable led-5, because GPIO E is
-		 * already used as touch interrupt.
-		 */
-		led-5 {
-			color = <LED_COLOR_ID_GREEN>;
-			default-state = "off";
-			function = LED_FUNCTION_INDICATOR;
-			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* GPIO E */
-			pinctrl-0 = <&pinctrl_dhcom_e>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		led-6 {
-			color = <LED_COLOR_ID_GREEN>;
-			default-state = "off";
-			function = LED_FUNCTION_INDICATOR;
-			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; /* GPIO F */
-			pinctrl-0 = <&pinctrl_dhcom_f>;
-			pinctrl-names = "default";
-		};
-
-		led-7 {
-			color = <LED_COLOR_ID_GREEN>;
-			default-state = "off";
-			function = LED_FUNCTION_INDICATOR;
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* GPIO H */
-			pinctrl-0 = <&pinctrl_dhcom_h>;
-			pinctrl-names = "default";
-		};
-
-		led-8 {
-			color = <LED_COLOR_ID_GREEN>;
-			default-state = "off";
-			function = LED_FUNCTION_INDICATOR;
-			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
-			pinctrl-0 = <&pinctrl_dhcom_i>;
-			pinctrl-names = "default";
-		};
-	};
-
-	panel {
-		backlight = <&display_bl>;
-		compatible = "edt,etm0700g0edh6";
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	sound {
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT";
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx-sgtl5000";
-		mux-ext-port = <3>;
-		mux-int-port = <1>;
-		ssi-controller = <&ssi1>;
-	};
-};
-
-&audmux {
-	pinctrl-0 = <&pinctrl_audmux_ext>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "disabled";
-};
-
-/* 1G ethernet */
-/delete-node/ &ethphy0;
-&fec {
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy7>;
-	pinctrl-0 = <&pinctrl_enet_1G>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy7: ethernet-phy@7 { /* KSZ 9021 */
-			compatible = "ethernet-phy-ieee802.3-c22";
-			interrupt-parent = <&gpio1>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-			pinctrl-0 = <&pinctrl_ethphy7>;
-			pinctrl-names = "default";
-			reg = <7>;
-			reset-assert-us = <1000>;
-			reset-deassert-us = <1000>;
-			reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			rxdv-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-			txen-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	sgtl5000: codec@a {
-		#sound-dai-cells = <0>;
-		clocks = <&clk_ext_audio_codec>;
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&sw2_reg>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5406";
-		interrupt-parent = <&gpio4>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-		pinctrl-0 = <&pinctrl_dhcom_e>;
-		pinctrl-names = "default";
-		reg = <0x38>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&pcie {
-	pinctrl-0 = <&pinctrl_pcie &pinctrl_dhcom_j>;
-	reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; /* GPIO J */
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-};
-
-&usdhc2 { /* SD card */
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-0 = <
-			/*
-			 * The following DHCOM GPIOs are used on this board.
-			 * Therefore, they have been removed from the list below.
-			 * A: key TA1
-			 * B: key TA2
-			 * C: key TA3
-			 * D: key TA4
-			 * E: touchscreen
-			 * F: led6
-			 * G: backlight enable
-			 * H: led7
-			 * I: led8
-			 * J: PCIe reset
-			 */
-			&pinctrl_hog_base
-			&pinctrl_dhcom_k &pinctrl_dhcom_l
-			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
-			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
-			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
-			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
-		>;
-	pinctrl-names = "default";
-
-	pinctrl_audmux_ext: audmux-ext-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-		>;
-	};
-
-	pinctrl_enet_1G: enet-1G-grp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-		>;
-	};
-
-	pinctrl_ethphy7: ethphy7-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0xb1 /* WOL */
-			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0xb0 /* Reset */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0xb1 /* Int */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi
deleted file mode 100644
index 4cd4cb9543c84..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2021 DH electronics GmbH
- */
-
-#include <dt-bindings/leds/common.h>
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	led {
-		compatible = "gpio-leds";
-
-		led-0 {
-			color = <LED_COLOR_ID_YELLOW>;
-			default-state = "off";
-			function = LED_FUNCTION_INDICATOR;
-			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
-			pinctrl-0 = <&pinctrl_dhcom_i>;
-			pinctrl-names = "default";
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "", "DHCOM-A", "", "DHCOM-B", "PicoITX-In2", "", "",
-		"", "", "", "", "", "", "", "",
-		"DHCOM-R", "DHCOM-S", "DHCOM-Q", "DHCOM-T", "DHCOM-U", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "PicoITX-In1", "DHCOM-INT", "DHCOM-H",
-		"DHCOM-I", "PicoITX-HW2", "", "", "", "", "", "",
-		"", "", "", "", "PicoITX-Out1", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"", "", "", "PicoITX-Out2", "", "", "SOM-HW1", "",
-		"", "", "", "", "", "", "PicoITX-HW0", "PicoITX-HW1",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&iomuxc {
-	pinctrl-0 = <
-			/*
-			 * The following DHCOM GPIOs are used on this board.
-			 * Therefore, they have been removed from the list below.
-			 * I: yellow led
-			 */
-			&pinctrl_hog_base
-			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
-			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
-			&pinctrl_dhcom_g &pinctrl_dhcom_h
-			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
-			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
-			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
-			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
-			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
-		>;
-	pinctrl-names = "default";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
deleted file mode 100644
index eaa87b3331648..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
+++ /dev/null
@@ -1,850 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2015-2021 DH electronics GmbH
- * Copyright (C) 2018 Marek Vasut <marex@denx.de>
- */
-
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	aliases {
-		i2c0 = &i2c2;
-		i2c1 = &i2c1;
-		i2c2 = &i2c3;
-		mmc0 = &usdhc2;
-		mmc1 = &usdhc3;
-		mmc2 = &usdhc4;
-		mmc3 = &usdhc1;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-		serial0 = &uart1;
-		serial1 = &uart5;
-		serial2 = &uart4;
-		serial3 = &uart2;
-		serial4 = &uart3;
-	};
-
-	memory@10000000 { /* Appropriate memory size will be filled by U-Boot */
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	reg_3p3v: regulator-3P3V {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "3P3V";
-	};
-
-	reg_eth_vio: regulator-eth-vio {
-		compatible = "regulator-fixed";
-		gpio = <&gpio1 7 0>;
-		pinctrl-0 = <&pinctrl_enet_vio>;
-		pinctrl-names = "default";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "eth_vio";
-		vin-supply = <&sw2_reg>;
-	};
-
-	/* OE pin of the latch is low active */
-	reg_latch_oe_on: regulator-latch-oe-on {
-		compatible = "regulator-fixed";
-		gpio = <&gpio3 22 0>;
-		regulator-always-on;
-		regulator-name = "latch_oe_on";
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 31 0>;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-name = "usb_h1_vbus";
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-name = "usb_otg_vbus";
-	};
-};
-
-&can1 {
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-/*
- * Special SoM hardware required which uses the pins from micro SD card. The
- * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can2
- * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. So to enable can2 on
- * the board device tree file, the micro SD card must be disabled and the uart1
- * rts/cts must be disabled or output on other DHCOM pins.
- */
-&can2 {
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 { /* S25FL116K */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		m25p,fast-read;
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&fec {
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	pinctrl-0 = <&pinctrl_enet_100M>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */
-			compatible = "ethernet-phy-id0007.c0f0",
-				     "ethernet-phy-ieee802.3-c22";
-			interrupt-parent = <&gpio4>;
-			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-			pinctrl-0 = <&pinctrl_ethphy0>;
-			pinctrl-names = "default";
-			reg = <0>;
-			reset-assert-us = <500>;
-			reset-deassert-us = <500>;
-			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			smsc,disable-energy-detect; /* Make plugin detection reliable */
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "", "DHCOM-A", "", "DHCOM-B", "DHCOM-C", "", "",
-		"", "", "", "", "", "", "", "",
-		"DHCOM-R", "DHCOM-S", "DHCOM-Q", "DHCOM-T", "DHCOM-U", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"SOM-HW2", "", "", "SOM-HW0", "", "SOM-MEM1", "SOM-MEM0", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "DHCOM-G", "", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "DHCOM-E", "DHCOM-INT", "DHCOM-H",
-		"DHCOM-I", "DHCOM-L", "", "", "", "", "", "",
-		"", "", "", "", "DHCOM-F", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "DHCOM-V", "DHCOM-W", "", "DHCOM-O", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"", "", "", "DHCOM-D", "", "", "SOM-HW1", "",
-		"", "", "", "", "", "", "DHCOM-J", "DHCOM-K",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio7 {
-	gpio-line-names =
-		"DHCOM-M", "DHCOM-N", "", "", "", "", "", "",
-		"", "", "", "", "", "DHCOM-P", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&i2c1 {
-	/*
-	 * Info: According to erratum ERR007805 clock frequency limit is 375000.
-	 * The erratum for i.MX6S/DL is here [1] and for i.MX6Q/D is here [2].
-	 * [1] https://www.nxp.com/docs/en/errata/IMX6SDLCE.pdf
-	 * [2] https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
-	 */
-	clock-frequency = <100000>;
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	pinctrl-names = "default", "gpio";
-	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c2 {
-	/* Info: Clock frequency limit is 375000 (for details see i2c1) */
-	clock-frequency = <100000>;
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	pinctrl-names = "default", "gpio";
-	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c3 {
-	/* Info: Clock frequency limit is 375000 (for details see i2c1) */
-	clock-frequency = <100000>;
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	pinctrl-names = "default", "gpio";
-	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-0 = <&pinctrl_pmic>;
-		pinctrl-names = "default";
-		reg = <0x3c>;
-
-		regulators {
-			sw1_reg: sw1 {
-				lltc,fb-voltage-divider = <100000 110000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1527272>;
-				regulator-min-microvolt = <787500>;
-				regulator-ramp-delay = <7000>;
-				regulator-suspend-mem-microvolt = <1040000>;
-			};
-
-			sw2_reg: sw2 {
-				lltc,fb-voltage-divider = <100000 28000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3657142>;
-				regulator-min-microvolt = <1885714>;
-				regulator-ramp-delay = <7000>;
-			};
-
-			sw3_reg: sw3 {
-				lltc,fb-voltage-divider = <100000 110000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1527272>;
-				regulator-min-microvolt = <787500>;
-				regulator-ramp-delay = <7000>;
-				regulator-suspend-mem-microvolt = <980000>;
-			};
-
-			sw4_reg: sw4 {
-				lltc,fb-voltage-divider = <100000 93100>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1659291>;
-				regulator-min-microvolt = <855571>;
-				regulator-ramp-delay = <7000>;
-			};
-
-			ldo1_reg: ldo1 {
-				lltc,fb-voltage-divider = <102000 29400>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3240306>;
-				regulator-min-microvolt = <3240306>;
-			};
-
-			ldo2_reg: ldo2 {
-				lltc,fb-voltage-divider = <100000 41200>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <2484708>;
-				regulator-min-microvolt = <2484708>;
-			};
-		};
-	};
-
-	touchscreen@49 { /* TSC2004 */
-		compatible = "ti,tsc2004";
-		interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-0 = <&pinctrl_tsc2004>;
-		pinctrl-names = "default";
-		reg = <0x49>;
-		vio-supply = <&reg_3p3v>;
-		status = "disabled";
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
-	rtc_i2c: rtc@56 {
-		compatible = "microcrystal,rv3029";
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-0 = <&pinctrl_rtc>;
-		pinctrl-names = "default";
-		reg = <0x56>;
-	};
-};
-
-&pcie {
-	pinctrl-0 = <&pinctrl_pcie>;
-	pinctrl-names = "default";
-};
-
-&pwm1 {
-	pinctrl-0 = <&pinctrl_pwm1>;
-	pinctrl-names = "default";
-};
-
-&reg_arm {
-	vin-supply = <&sw3_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&sw1_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1_reg>;
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&sw2_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&sw2_reg>;
-};
-
-&uart1 { /* DHCOM UART1 */
-	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&pinctrl_uart1>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 { /* DHCOM UART3 */
-	pinctrl-0 = <&pinctrl_uart4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart5 { /* DHCOM UART2 */
-	pinctrl-0 = <&pinctrl_uart5>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	dr_mode = "host";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	pinctrl-names = "default";
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	dr_mode = "otg";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	pinctrl-names = "default";
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
-&usdhc2 { /* External SD card via DHCOM */
-	cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
-	keep-power-in-suspend;
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&usdhc3 { /* Micro SD card on module */
-	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	keep-power-in-suspend;
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usdhc4 { /* eMMC on module */
-	bus-width = <8>;
-	keep-power-in-suspend;
-	no-1-8-v;
-	non-removable;
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&weim {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	fsl,weim-cs-gpr = <&gpr>;
-	pinctrl-0 = <&pinctrl_weim &pinctrl_weim_cs0 &pinctrl_weim_cs1>;
-	pinctrl-names = "default";
-	/* It is necessary to setup 2x 64MB otherwise setting gpr fails */
-	ranges = <0 0 0x08000000 0x04000000>, /* CS0 */
-		 <1 0 0x0c000000 0x04000000>; /* CS1 */
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl-0 = <
-			&pinctrl_hog_base
-			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
-			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
-			&pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
-			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
-			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
-			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
-			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
-			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
-		>;
-	pinctrl-names = "default";
-
-	pinctrl_hog_base: hog-base-grp {
-		fsl,pins = <
-			/* GPIOs for memory coding */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x120b0
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x120b0
-			/* GPIOs for hardware coding */
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x120b0
-			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x120b0
-			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x120b0
-		>;
-	};
-
-	/* DHCOM GPIOs */
-	pinctrl_dhcom_a: dhcom-a-grp {
-		fsl,pins = <MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x400120b0>;
-	};
-
-	pinctrl_dhcom_b: dhcom-b-grp {
-		fsl,pins = <MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x400120b0>;
-	};
-
-	pinctrl_dhcom_c: dhcom-c-grp {
-		fsl,pins = <MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x400120b0>;
-	};
-
-	pinctrl_dhcom_d: dhcom-d-grp {
-		fsl,pins = <MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x400120b0>;
-	};
-
-	pinctrl_dhcom_e: dhcom-e-grp {
-		fsl,pins = <MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x400120b0>;
-	};
-
-	pinctrl_dhcom_f: dhcom-f-grp {
-		fsl,pins = <MX6QDL_PAD_DI0_PIN4__GPIO4_IO20	0x400120b0>;
-	};
-
-	pinctrl_dhcom_g: dhcom-g-grp {
-		fsl,pins = <MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x400120b0>;
-	};
-
-	pinctrl_dhcom_h: dhcom-h-grp {
-		fsl,pins = <MX6QDL_PAD_KEY_ROW0__GPIO4_IO07	0x400120b0>;
-	};
-
-	pinctrl_dhcom_i: dhcom-i-grp {
-		fsl,pins = <MX6QDL_PAD_KEY_COL1__GPIO4_IO08	0x400120b0>;
-	};
-
-	pinctrl_dhcom_j: dhcom-j-grp {
-		fsl,pins = <MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x400120b0>;
-	};
-
-	pinctrl_dhcom_k: dhcom-k-grp {
-		fsl,pins = <MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x400120b0>;
-	};
-
-	pinctrl_dhcom_l: dhcom-l-grp {
-		fsl,pins = <MX6QDL_PAD_KEY_ROW1__GPIO4_IO09	0x400120b0>;
-	};
-
-	pinctrl_dhcom_m: dhcom-m-grp {
-		fsl,pins = <MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x400120b0>;
-	};
-
-	pinctrl_dhcom_n: dhcom-n-grp {
-		fsl,pins = <MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x400120b0>;
-	};
-
-	pinctrl_dhcom_o: dhcom-o-grp {
-		fsl,pins = <MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x400120b0>;
-	};
-
-	pinctrl_dhcom_p: dhcom-p-grp {
-		fsl,pins = <MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x400120b0>;
-	};
-
-	pinctrl_dhcom_q: dhcom-q-grp {
-		fsl,pins = <MX6QDL_PAD_SD1_CMD__GPIO1_IO18	0x400120b0>;
-	};
-
-	pinctrl_dhcom_r: dhcom-r-grp {
-		fsl,pins = <MX6QDL_PAD_SD1_DAT0__GPIO1_IO16	0x400120b0>;
-	};
-
-	pinctrl_dhcom_s: dhcom-s-grp {
-		fsl,pins = <MX6QDL_PAD_SD1_DAT1__GPIO1_IO17	0x400120b0>;
-	};
-
-	pinctrl_dhcom_t: dhcom-t-grp {
-		fsl,pins = <MX6QDL_PAD_SD1_DAT2__GPIO1_IO19	0x400120b0>;
-	};
-
-	pinctrl_dhcom_u: dhcom-u-grp {
-		fsl,pins = <MX6QDL_PAD_SD1_CLK__GPIO1_IO20	0x400120b0>;
-	};
-
-	pinctrl_dhcom_v: dhcom-v-grp {
-		fsl,pins = <MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x400120b0>;
-	};
-
-	pinctrl_dhcom_w: dhcom-w-grp {
-		fsl,pins = <MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x400120b0>;
-	};
-
-	pinctrl_dhcom_int: dhcom-int-grp {
-		fsl,pins = <MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x400120b0>;
-	};
-
-	pinctrl_ecspi1: ecspi1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
-			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
-			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
-			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
-		>;
-	};
-
-	pinctrl_enet_100M: enet-100M-grp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-		>;
-	};
-
-	pinctrl_enet_vio: enet-vio-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x120b0
-		>;
-	};
-
-	pinctrl_ethphy0: ethphy0-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0xb0 /* Reset */
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0xb1 /* Int */
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
-			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1-gpio-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2-grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2-gpio-grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3-gpio-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
-		>;
-	};
-
-	pinctrl_pcie: pcie-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* Wake */
-		>;
-	};
-
-	pinctrl_pmic: pmic-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_rtc: rtc-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x120b0
-		>;
-	};
-
-	pinctrl_tsc2004: tsc2004-grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x120b0
-		>;
-	};
-
-	pinctrl_uart1: uart1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x4001b0b1
-			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x4001b0b1
-			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x4001b0b1
-			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x4001b0b1
-			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x4001b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B	0x4001b0b1
-		>;
-	};
-
-	pinctrl_usbh1: usbh1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x120b0
-			MX6QDL_PAD_EIM_D30__USB_H1_OC		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotg-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2-grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x120b0
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x120b0
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-		>;
-	};
-
-	pinctrl_weim: weim-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0a6
-			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0a6
-			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0a6
-			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0a6
-			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0a6
-			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0a6
-			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0a6
-			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0a6
-			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0a6
-			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0a6
-			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0a6
-			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0a6
-			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0a6
-			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0a6
-			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0a6
-			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0a6
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
-			MX6QDL_PAD_EIM_LBA__EIM_LBA_B		0xb060 /* LE */
-			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0a6
-			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0a6 /* WE */
-		>;
-	};
-
-	pinctrl_weim_cs0: weim-cs0-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
-		>;
-	};
-
-	pinctrl_weim_cs1: weim-cs1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_CS1__EIM_CS1_B		0xb0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-ds.dtsi b/arch/arm/boot/dts/imx6qdl-ds.dtsi
deleted file mode 100644
index f7e5175556977..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-ds.dtsi
+++ /dev/null
@@ -1,458 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2021 Dillon Min <dillon.minfei@gmail.com>
-//
-// Based on imx6qdl-sabresd.dtsi which is:
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led-0 {
-			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-	data-shift = <12>; /* Lines 19:12 used */
-	hsync-active = <1>;
-	vsync-active = <1>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&ov2659_to_ipu1_csi0_mux>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_gpio>;
-	status = "okay";
-
-	m25p80: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p80", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&phy>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy: ethernet-phy@1 {
-			reg = <1>;
-			qca,clk-out-frequency = <125000000>;
-			reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_cec>;
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pfuze100: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	ov2659: camera@30 {
-		compatible = "ovti,ov2659";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov2659>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xvclk";
-		reg = <0x30>;
-		powerdown-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		status = "okay";
-
-		port {
-			ov2659_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				link-frequencies = /bits/ 64 <70000000>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-		>;
-	};
-
-	pinctrl_ecspi1_gpio: ecspi1grpgpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10         0x1b0b0
-		>;
-	};
-
-	pinctrl_hdmi_cec: hdmicecgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
-			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
-			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
-		>;
-	};
-
-	pinctrl_ov2659: ov2659grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
-			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_gpio: usdhc1grpgpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
-		>;
-	};
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
-	bus-width = <4>;
-	cd-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-	status = "disabled";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&wdog2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
deleted file mode 100644
index c4e146f3341bb..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
-//
-// Copyright (C) 2018 emtrion GmbH
-//
-
-/ {
-	aliases {
-		boardid = &boardid;
-		mmc0 = &usdhc3;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc1;
-		mmc3 = &usdhc4;
-	};
-
-	reg_wall_5p0: reg-wall5p0 {
-		compatible = "regulator-fixed";
-		regulator-name = "Main-Supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_base3p3: reg-base3p3 {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_wall_5p0>;
-		regulator-name = "3V3-avari";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_base1p5: reg-base1p5 {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_base3p3>;
-		regulator-name = "1V5-avari";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_usb_otg: reg-otgvbus {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_wall_5p0>;
-		regulator-name = "OTG_VBUS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		regulator-always-on;
-	};
-
-	clk_codec: clock-codec {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency  = <12000000>;
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "emCON-avari-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&ecspi2 {
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		clocks = <&clk_codec>;
-		VDDA-supply = <&reg_base3p3>;
-		VDDIO-supply = <&reg_base3p3>;
-	};
-
-	captouch: touchscreen@38 {
-		compatible = "edt,edt-ft5406";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-		wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-
-	boardid: gpio@3a {
-		compatible = "nxp,pca8574";
-		reg = <0x3a>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&rgb_encoder {
-	status = "okay";
-};
-
-&rgb_panel {
-	compatible = "edt,etm0700g0bdh6";
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-	uart-has-rtscts;
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
-
-&usdhc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
deleted file mode 100644
index ee2dd75cead6d..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi
+++ /dev/null
@@ -1,834 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
-//
-// Copyright (C) 2018 emtrion GmbH
-//
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-
-	model = "emtrion SoM emCON-MX6";
-	compatible = "emtrion,emcon-mx6";
-
-	aliases {
-		mmc0 = &usdhc3;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc1;
-		rtc0 = &ds1307;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_emcon_wake>;
-
-		wake {
-			label = "Wake";
-			linux,code = <KEY_WAKEUP>;
-			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-	};
-
-	som_leds: leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_som_leds>;
-
-		led-green {
-			label = "som:green";
-			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "on";
-		};
-
-		led-red {
-			label = "som:red";
-			gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-	};
-
-	lvds_backlight: lvds-backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lvds_bl>;
-		enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm1 0 50000>;
-		brightness-levels = <
-			0 4 8 16 32 64 80 96 112
-			128 144 160 176 250
-		>;
-		default-brightness-level = <13>;
-		status = "okay";
-	};
-
-	pwm_fan: pwm-fan {
-		compatible = "pwm-fan";
-		#cooling-cells = <2>;
-		pwms = <&pwm4 0 50000>;
-		cooling-levels = <0 64 127 191 255>;
-		status = "disabled";
-	};
-
-
-	rgb_encoder: display {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rgb24_display>;
-		status = "disabled";
-
-		port@0 {
-			reg = <0>;
-
-			rgb_encoder_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			rgb_encoder_out: endpoint {
-				remote-endpoint = <&rgb_panel_in>;
-			};
-		};
-	};
-
-	rgb_panel: lcd {
-		backlight = <&rgb_backlight>;
-		power-supply = <&reg_parallel_disp>;
-
-		port {
-			rgb_panel_in: endpoint {
-				remote-endpoint = <&rgb_encoder_out>;
-			};
-		};
-	};
-
-	reg_parallel_disp: reg-parallel-display {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rgb_bl_en>;
-		regulator-name = "LCD-Supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lvds_disp: reg-lvds-display {
-		compatible = "regulator-fixed";
-		regulator-name = "LVDS-Supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	rgb_backlight: rgb-backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rgb_bl>;
-		enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm3 0 5000000>;
-		brightness-levels = <
-			250 176 160 144 128 112
-			96 80 64 48 32 16 8 1
-		>;
-		default-brightness-level = <13>;
-		status = "okay";
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
-		<&gpio2 27 GPIO_ACTIVE_LOW>;
-};
-
-&ecspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nor_flash>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <50>;
-	phy-supply = <&vdd_1V8_reg>;
-	phy-handle = <&ksz9031>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ksz9031: phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
-			rxdv-skew-ps = <480>;
-			txen-skew-ps = <480>;
-			rxd0-skew-ps = <480>;
-			rxd1-skew-ps = <480>;
-			rxd2-skew-ps = <480>;
-			rxd3-skew-ps = <480>;
-			txd0-skew-ps = <420>;
-			txd1-skew-ps = <420>;
-			txd2-skew-ps = <360>;
-			txd3-skew-ps = <360>;
-			txc-skew-ps = <1020>;
-			rxc-skew-ps = <960>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	da9063: pmic@58 {
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		onkey {
-			compatible = "dlg,da9063-onkey";
-			wakeup-source;
-		};
-
-		watchdog {
-			compatible = "dlg,da9063-watchdog";
-			timeout-sec = <0>;
-		};
-
-		regulators {
-			vddcore_reg: bcore1 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1450000>;
-				regulator-ramp-delay = <2>;
-				regulator-name = "DA9063_CORE";
-				regulator-always-on;
-			};
-
-			vddsoc_reg: bcore2 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1450000>;
-				regulator-ramp-delay = <2>;
-				regulator-name = "DA9063_SOC";
-				regulator-always-on;
-			};
-
-			vdd_ddr3_reg: bpro {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-ramp-delay = <2>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_reg: bperi {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <2>;
-				regulator-always-on;
-			};
-
-			vdd_sata_reg: ldo3 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-			vdd_mipi_reg: ldo4 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vdd_mx6_snvs_reg: ldo5 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_hdmi_reg: ldo6 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vdd_pcie_reg: ldo7 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vdd_1V8_reg: ldo8 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vdd_3V3_sdc_reg: ldo9 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_1V2_reg: ldo10 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	ds1307: rtc@68 {
-		compatible = "dallas,ds1307";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-};
-
-&iomuxc {
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x1b060
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x130B0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x1b060
-		>;
-	};
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x1b0b1
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b0b1
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x1b0b1
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b0b1
-		>;
-	};
-
-	pinctrl_cpi1: csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
-			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC	0x1b0b1
-			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b1
-		>;
-	};
-
-	/*camera2-pinctrl is in imx6q-emcon.dtsi or imx6dl-emcon.dtsi*/
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0x100b1
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x100b1
-			MX6QDL_PAD_EIM_LBA__GPIO2_IO27			0x100b1
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x100b1
-		>;
-	};
-
-	pinctrl_emcon_gpio1: emcongpio1 {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00			0x0b0b1
-		>;
-	};
-
-	pinctrl_emcon_gpio2: emcongpio2 {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01			0x0b0b1
-		>;
-	};
-
-	pinctrl_emcon_gpio3: emcongpio3 {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02			0x0b0b1
-		>;
-	};
-
-	pinctrl_emcon_gpio4: emcongpio4 {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x0b0b1
-		>;
-	};
-
-	pinctrl_emcon_gpio5: emcongpio5 {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D4__GPIO2_IO04			0x0b0b1
-		>;
-	};
-
-	pinctrl_emcon_gpio6: emcongpio6 {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05			0x0b0b1
-		>;
-	};
-
-	pinctrl_emcon_gpio7: emcongpio7 {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D6__GPIO2_IO06			0x0b0b1
-		>;
-	};
-
-	pinctrl_emcon_gpio8: emcongpio8 {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D7__GPIO2_IO07			0x0b0b1
-		>;
-	};
-
-	pinctrl_emcon_irq_a: emconirqa {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07		0x0b0b1
-		>;
-	};
-
-	pinctrl_emcon_irq_b: emconirqb {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15		0x0b0b1
-		>;
-	};
-
-	pinctrl_emcon_irq_c: emconirqc {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16		0x0b0b1
-		>;
-	};
-
-	pinctrl_emcon_irq_pwr: emconirqpwr {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x0b0b1
-		>;
-	};
-
-	pinctrl_emcon_wake: emconwake {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA2__GPIO3_IO02			0x1b0b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b030
-			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x4001a0b1
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b058
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30		0x1b0b0
-		 >;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4000b070
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b870
-		>;
-	};
-
-	pinctrl_irq_touch1: irqtouch1 {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05			0x0b0b1
-		>;
-	};
-
-	pinctrl_irq_touch2: irqtouch2 {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31			0x0b0b1
-		>;
-	};
-
-	pinctrl_lvds_bl: lvdsbacklightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT			0x0b0b1
-			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09		0x0b0b1
-		>;
-	};
-
-	pinctrl_lvds_reg: lvdsreggrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CLK__GPIO7_IO10			0x0b0b1
-		>;
-	};
-
-
-	pinctrl_nor_flash: norflashgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11		0x1b0b1
-			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK			0x100b1
-			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI			0x100b1
-			MX6QDL_PAD_EIM_D22__ECSPI4_MISO			0x100b1
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b1
-		>;
-	};
-
-	pinctrl_pcie_ctrl: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x1b0b1
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b1
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x0b0b1
-		>;
-	};
-
-	pinctrl_pwm_fan: pwmfan {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT2__PWM4_OUT			0x0b0b1
-		>;
-	};
-
-	pinctrl_rgb_bl: rgbbacklightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT			0x0b0b1
-			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08		0x0b0b1
-		>;
-	};
-
-	pinctrl_rgb_bl_en: rgbenable {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__GPIO7_IO09			0x0b0b1
-		>;
-	};
-
-	pinctrl_rgb24_display: rgbgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-		>;
-	};
-
-	pinctrl_secure: securegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13			0x1b0b1
-		>;
-	};
-
-	pinctrl_som_leds: somledgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA0__GPIO3_IO00			0x0b0b1
-			MX6QDL_PAD_EIM_DA1__GPIO3_IO01			0x0b0b1
-		>;
-	};
-
-	pinctrl_spdif_in: spdifin {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_16__SPDIF_IN			0x1b0b0
-		>;
-	};
-
-	pinctrl_spdif_out: spdifout {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_19__SPDIF_OUT			0x13091
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B		0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B		0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA		0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_usb_host1: usbhgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D31__USB_H1_PWR			0x1B058
-			MX6QDL_PAD_EIM_D30__USB_H1_OC			0x1B058
-		>;
-	};
-
-	pinctrl_usb_otg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID		0x17059
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07			0x17059
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x17059
-			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x10059
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x17059
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x17059
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x17059
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x17059
-			MX6QDL_PAD_GPIO_1__SD1_CD_B			0x1b0b1
-			MX6QDL_PAD_DI0_PIN4__SD1_WP			0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD			0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK			0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0			0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1			0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2			0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3			0x17059
-			MX6QDL_PAD_GPIO_4__SD2_CD_B			0x1b0b1
-			MX6QDL_PAD_GPIO_2__SD2_WP			0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17059
-			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
-		>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&rgb_encoder_in>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie_ctrl>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	disable-gpio = <&gpio2 22 GPIO_ACTIVE_LOW>;
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	status = "okay";
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_host1>;
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg>;
-	vbus-supply = <&reg_usb_otg>;
-	dr_mode = "peripheral";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	fsl,wp-controller;
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	fsl,wp-controller;
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
-	bus-width = <8>;
-	status = "okay";
-};
-
-/******device power Management*********/
-
-&cpu0 {
-	voltage-tolerance = <2>;
-};
-
-&reg_arm {
-	vin-supply = <&vddcore_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&vddsoc_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&vddsoc_reg>;
-};
-
-/*******Disabled HW following***********/
-
-&snvs_rtc {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
deleted file mode 100644
index e75e1a5364b85..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ /dev/null
@@ -1,638 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Gateworks Corporation
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@0 {
-				gw,mode = <0>;
-				reg = <0x00>;
-				label = "temp";
-			};
-
-			channel@2 {
-				gw,mode = <1>;
-				reg = <0x02>;
-				label = "vdd_vin";
-			};
-
-			channel@5 {
-				gw,mode = <1>;
-				reg = <0x05>;
-				label = "vdd_3p3";
-			};
-
-			channel@8 {
-				gw,mode = <1>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@b {
-				gw,mode = <1>;
-				reg = <0x0b>;
-				label = "vdd_5p0";
-			};
-
-			channel@e {
-				gw,mode = <1>;
-				reg = <0xe>;
-				label = "vdd_arm";
-			};
-
-			channel@11 {
-				gw,mode = <1>;
-				reg = <0x11>;
-				label = "vdd_soc";
-			};
-
-			channel@14 {
-				gw,mode = <1>;
-				reg = <0x14>;
-				label = "vdd_3p0";
-			};
-
-			channel@17 {
-				gw,mode = <1>;
-				reg = <0x17>;
-				label = "vdd_1p5";
-			};
-
-			channel@1d {
-				gw,mode = <1>;
-				reg = <0x1d>;
-				label = "vdd_1p8";
-			};
-
-			channel@20 {
-				gw,mode = <1>;
-				reg = <0x20>;
-				label = "vdd_an1";
-			};
-
-			channel@23 {
-				gw,mode = <1>;
-				reg = <0x23>;
-				label = "vdd_2p5";
-			};
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
-			reg_1p8v: sw2 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw4 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
-			reg_2p5v: ldo2 {
-				regulator-name = "vdd2p5";
-				regulator-min-microvolt = <2490375>;
-				regulator-max-microvolt = <2490375>;
-				lltc,fb-voltage-divider = <487000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	adv7180: camera@20 {
-		compatible = "adi,adv7180";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_adv7180>;
-		reg = <0x20>;
-		powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
-
-		port {
-			adv7180_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <8>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
-	bus-width = <8>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_adv7180: adv7180grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x0001b0b0
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x4001b0b0
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
-			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
-			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
-			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
deleted file mode 100644
index 47d9a8d08197d..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ /dev/null
@@ -1,795 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Gateworks Corporation
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		ssi0 = &ssi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: led-user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_1p0v: regulator-1p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P0V";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_can1_stby: regulator-can1-stby {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_can1>;
-		regulator-name = "can1_stby";
-		gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "fsl,imx6q-ventana-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "sgtl5000-audio";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can1_stby>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@0 {
-				gw,mode = <0>;
-				reg = <0x00>;
-				label = "temp";
-			};
-
-			channel@2 {
-				gw,mode = <1>;
-				reg = <0x02>;
-				label = "vdd_vin";
-			};
-
-			channel@5 {
-				gw,mode = <1>;
-				reg = <0x05>;
-				label = "vdd_3p3";
-			};
-
-			channel@8 {
-				gw,mode = <1>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@b {
-				gw,mode = <1>;
-				reg = <0x0b>;
-				label = "vdd_5p0";
-			};
-
-			channel@e {
-				gw,mode = <1>;
-				reg = <0xe>;
-				label = "vdd_arm";
-			};
-
-			channel@11 {
-				gw,mode = <1>;
-				reg = <0x11>;
-				label = "vdd_soc";
-			};
-
-			channel@14 {
-				gw,mode = <1>;
-				reg = <0x14>;
-				label = "vdd_3p0";
-			};
-
-			channel@17 {
-				gw,mode = <1>;
-				reg = <0x17>;
-				label = "vdd_1p5";
-			};
-
-			channel@1d {
-				gw,mode = <1>;
-				reg = <0x1d>;
-				label = "vdd_1p8";
-			};
-
-			channel@20 {
-				gw,mode = <1>;
-				reg = <0x20>;
-				label = "vdd_1p0";
-			};
-
-			channel@23 {
-				gw,mode = <1>;
-				reg = <0x23>;
-				label = "vdd_2p5";
-			};
-
-			channel@29 {
-				gw,mode = <1>;
-				reg = <0x29>;
-				label = "vdd_an1";
-			};
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
-			reg_1p8v: sw2 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw4 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
-			reg_2p5v: ldo2 {
-				regulator-name = "vdd2p5";
-				regulator-min-microvolt = <2490375>;
-				regulator-max-microvolt = <2490375>;
-				lltc,fb-voltage-divider = <487000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_AUD_1P8: Audio codec */
-			reg_aud_1p8v: ldo3 {
-				regulator-name = "vdd1p8a";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_1p8v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	touchscreen: egalax_ts@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>;
-		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	};
-
-	accel@1e {
-		compatible = "nxp,fxos8700";
-		reg = <0x1e>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	no-1-8-v; /* firmware will remove if board revision supports */
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0 /* AUD4_MCK */
-		>;
-	};
-
-	pinctrl_ecspi3: escpi3grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE_RST# */
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_reg_can1: regcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0 /* OTG_PWR_EN */
-			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
deleted file mode 100644
index fb1d29abe0991..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ /dev/null
@@ -1,784 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Gateworks Corporation
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		ssi0 = &ssi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: led-user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_1p0v: regulator-1p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P0V";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_can1_stby: regulator-can1-stby {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_can1>;
-		regulator-name = "can1_stby";
-		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "fsl,imx6q-ventana-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "sgtl5000-audio";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can1_stby>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@0 {
-				gw,mode = <0>;
-				reg = <0x00>;
-				label = "temp";
-			};
-
-			channel@2 {
-				gw,mode = <1>;
-				reg = <0x02>;
-				label = "vdd_vin";
-			};
-
-			channel@5 {
-				gw,mode = <1>;
-				reg = <0x05>;
-				label = "vdd_3p3";
-			};
-
-			channel@8 {
-				gw,mode = <1>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@b {
-				gw,mode = <1>;
-				reg = <0x0b>;
-				label = "vdd_5p0";
-			};
-
-			channel@e {
-				gw,mode = <1>;
-				reg = <0xe>;
-				label = "vdd_arm";
-			};
-
-			channel@11 {
-				gw,mode = <1>;
-				reg = <0x11>;
-				label = "vdd_soc";
-			};
-
-			channel@14 {
-				gw,mode = <1>;
-				reg = <0x14>;
-				label = "vdd_3p0";
-			};
-
-			channel@17 {
-				gw,mode = <1>;
-				reg = <0x17>;
-				label = "vdd_1p5";
-			};
-
-			channel@1d {
-				gw,mode = <1>;
-				reg = <0x1d>;
-				label = "vdd_1p8";
-			};
-
-			channel@20 {
-				gw,mode = <1>;
-				reg = <0x20>;
-				label = "vdd_1p0";
-			};
-
-			channel@23 {
-				gw,mode = <1>;
-				reg = <0x23>;
-				label = "vdd_2p5";
-			};
-
-			channel@26 {
-				gw,mode = <1>;
-				reg = <0x26>;
-				label = "vdd_gps";
-			};
-
-			channel@29 {
-				gw,mode = <1>;
-				reg = <0x29>;
-				label = "vdd_an1";
-			};
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
-			reg_1p8v: sw2 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw4 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
-			reg_2p5v: ldo2 {
-				regulator-name = "vdd2p5";
-				regulator-min-microvolt = <2490375>;
-				regulator-max-microvolt = <2490375>;
-				lltc,fb-voltage-divider = <487000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_AUD_1P8: Audio codec */
-			reg_aud_1p8v: ldo3 {
-				regulator-name = "vdd1p8a";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_1p8v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	touchscreen: egalax_ts@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <11 2>;
-		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-	};
-
-	accel@1e {
-		compatible = "nxp,fxos8700";
-		reg = <0x1e>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	no-1-8-v; /* firmware will remove if board revision supports */
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x1b0b0 /* PCIE RST */
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_reg_can1: regcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
deleted file mode 100644
index 4e20cb97058eb..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ /dev/null
@@ -1,879 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Gateworks Corporation
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		ssi0 = &ssi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: led-user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p0v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_can1_stby: regulator-can1-stby {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_reg_can1>;
-			regulator-name = "can1_stby";
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		reg_usb_h1_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound-analog {
-		compatible = "fsl,imx6q-ventana-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "sgtl5000-audio";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
-	status = "okay";
-
-	ssi2 {
-		fsl,audmux-port = <1>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSDIR |
-			IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
-			IMX_AUDMUX_V2_PTCR_TCLKDIR |
-			IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
-			IMX_AUDMUX_V2_PTCR_SYN)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
-		>;
-	};
-
-	aud5 {
-		fsl,audmux-port = <4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(1)>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can1_stby>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@0 {
-				gw,mode = <0>;
-				reg = <0x00>;
-				label = "temp";
-			};
-
-			channel@2 {
-				gw,mode = <1>;
-				reg = <0x02>;
-				label = "vdd_vin";
-			};
-
-			channel@5 {
-				gw,mode = <1>;
-				reg = <0x05>;
-				label = "vdd_3p3";
-			};
-
-			channel@8 {
-				gw,mode = <1>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@b {
-				gw,mode = <1>;
-				reg = <0x0b>;
-				label = "vdd_5p0";
-			};
-
-			channel@e {
-				gw,mode = <1>;
-				reg = <0xe>;
-				label = "vdd_arm";
-			};
-
-			channel@11 {
-				gw,mode = <1>;
-				reg = <0x11>;
-				label = "vdd_soc";
-			};
-
-			channel@14 {
-				gw,mode = <1>;
-				reg = <0x14>;
-				label = "vdd_3p0";
-			};
-
-			channel@17 {
-				gw,mode = <1>;
-				reg = <0x17>;
-				label = "vdd_1p5";
-			};
-
-			channel@1d {
-				gw,mode = <1>;
-				reg = <0x1d>;
-				label = "vdd_1p8";
-			};
-
-			channel@20 {
-				gw,mode = <1>;
-				reg = <0x20>;
-				label = "vdd_1p0";
-			};
-
-			channel@23 {
-				gw,mode = <1>;
-				reg = <0x23>;
-				label = "vdd_2p5";
-			};
-
-			channel@26 {
-				gw,mode = <1>;
-				reg = <0x26>;
-				label = "vdd_gps";
-			};
-		};
-
-		fan-controller@2c {
-			compatible = "gw,gsc-fan";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2c>;
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&sw4_reg>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	touchscreen: egalax_ts@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>;
-		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	};
-
-	accel@1e {
-		compatible = "nxp,fxos8700";
-		reg = <0x1e>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
-	status = "disabled";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default", "state_dio";
-	pinctrl-0 = <&pinctrl_pwm4_backlight>;
-	pinctrl-1 = <&pinctrl_pwm4_dio>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	no-1-8-v; /* firmware will remove if board revision supports */
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&wdog2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
-			MX6QDL_PAD_EIM_D25__AUD5_RXC            0x130b0
-			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD        0x130b0
-			MX6QDL_PAD_EIM_D24__AUD5_RXFS           0x130b0
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-		>;
-	};
-
-	pinctrl_ecspi2: escpi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4_backlight: pwm4grpbacklight {
-		fsl,pins = <
-			/* LVDS_PWM J6.5 */
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4_dio: pwm4grpdio {
-		fsl,pins = <
-			/* DIO3 J16.4 */
-			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_reg_can1: regcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
-			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
deleted file mode 100644
index 0fa4b8eeddee7..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ /dev/null
@@ -1,695 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/media/tda1997x.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		nand = &gpmi;
-		ssi0 = &ssi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	sound-digital {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "tda1997x-audio";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_codec>;
-		simple-audio-card,frame-master = <&sound_codec>;
-
-		sound_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		sound_codec: simple-audio-card,codec {
-			sound-dai = <&hdmi_receiver>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */
-	status = "okay";
-
-	ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSDIR |
-			IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
-			IMX_AUDMUX_V2_PTCR_TCLKDIR |
-			IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
-			IMX_AUDMUX_V2_PTCR_SYN)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
-		>;
-	};
-
-	aud5 {
-		fsl,audmux-port = <4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(0)>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@0 {
-				gw,mode = <0>;
-				reg = <0x00>;
-				label = "temp";
-			};
-
-			channel@2 {
-				gw,mode = <1>;
-				reg = <0x02>;
-				label = "vdd_vin";
-			};
-
-			channel@5 {
-				gw,mode = <1>;
-				reg = <0x05>;
-				label = "vdd_3p3";
-			};
-
-			channel@8 {
-				gw,mode = <1>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@b {
-				gw,mode = <1>;
-				reg = <0x0b>;
-				label = "vdd_5p0";
-			};
-
-			channel@e {
-				gw,mode = <1>;
-				reg = <0xe>;
-				label = "vdd_arm";
-			};
-
-			channel@11 {
-				gw,mode = <1>;
-				reg = <0x11>;
-				label = "vdd_soc";
-			};
-
-			channel@14 {
-				gw,mode = <1>;
-				reg = <0x14>;
-				label = "vdd_3p0";
-			};
-
-			channel@17 {
-				gw,mode = <1>;
-				reg = <0x17>;
-				label = "vdd_1p5";
-			};
-
-			channel@1d {
-				gw,mode = <1>;
-				reg = <0x1d>;
-				label = "vdd_1p8a";
-			};
-
-			channel@20 {
-				gw,mode = <1>;
-				reg = <0x20>;
-				label = "vdd_1p0b";
-			};
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw2 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_3P3 (1+R1/R2 = 1.281) */
-			reg_3p3: sw4 {
-				regulator-name = "vdd3p3";
-				regulator-min-microvolt = <1880000>;
-				regulator-max-microvolt = <3647000>;
-				lltc,fb-voltage-divider = <200000 56200>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */
-			reg_1p8a: ldo2 {
-				regulator-name = "vdd1p8a";
-				regulator-min-microvolt = <1816125>;
-				regulator-max-microvolt = <1816125>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8b: HDMI In analog */
-			reg_1p8b: ldo3 {
-				regulator-name = "vdd1p8b";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	gpio_exp: pca9555@24 {
-		compatible = "nxp,pca9555";
-		reg = <0x24>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	hdmi_receiver: hdmi-receiver@48 {
-		compatible = "nxp,tda19971";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tda1997x>;
-		reg = <0x48>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		DOVDD-supply = <&reg_3p3>;
-		AVDD-supply = <&reg_1p8b>;
-		DVDD-supply = <&reg_1p8a>;
-		#sound-dai-cells = <0>;
-		nxp,audout-format = "i2s";
-		nxp,audout-layout = <0>;
-		nxp,audout-width = <16>;
-		nxp,audout-mclk-fs = <128>;
-		/*
-		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
-		 * and Y[11:4] across 16bits in the same cycle
-		 * which we map to VP[15:08]<->CSI_DATA[19:12]
-		 */
-		nxp,vidout-portcfg =
-			/*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
-			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
-			/*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
-			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
-			/*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
-			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
-			/*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
-			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
-
-		port {
-			tda1997x_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <16>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				data-active = <1>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <16>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
-	bus-width = <16>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
-			MX6QDL_PAD_DISP0_DAT14__AUD5_RXC	0x130b0
-			MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS	0x130b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1_csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
-			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
-			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* PCIE RST */
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_tda1997x: tda1997xgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
deleted file mode 100644
index 77ae611b817a4..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ /dev/null
@@ -1,519 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2014 Gateworks Corporation
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: led-user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	reg_1p0v: regulator-1p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P0V";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@0 {
-				gw,mode = <0>;
-				reg = <0x00>;
-				label = "temp";
-			};
-
-			channel@2 {
-				gw,mode = <1>;
-				reg = <0x02>;
-				label = "vdd_vin";
-			};
-
-			channel@5 {
-				gw,mode = <1>;
-				reg = <0x05>;
-				label = "vdd_3p3";
-			};
-
-			channel@8 {
-				gw,mode = <1>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@b {
-				gw,mode = <1>;
-				reg = <0x0b>;
-				label = "vdd_5p0";
-			};
-
-			channel@e {
-				gw,mode = <1>;
-				reg = <0xe>;
-				label = "vdd_arm";
-			};
-
-			channel@11 {
-				gw,mode = <1>;
-				reg = <0x11>;
-				label = "vdd_soc";
-			};
-
-			channel@14 {
-				gw,mode = <1>;
-				reg = <0x14>;
-				label = "vdd_3p0";
-			};
-
-			channel@17 {
-				gw,mode = <1>;
-				reg = <0x17>;
-				label = "vdd_1p5";
-			};
-
-			channel@1d {
-				gw,mode = <1>;
-				reg = <0x1d>;
-				label = "vdd_1p8";
-			};
-
-			channel@20 {
-				gw,mode = <1>;
-				reg = <0x20>;
-				label = "vdd_1p0";
-			};
-
-			channel@23 {
-				gw,mode = <1>;
-				reg = <0x23>;
-				label = "vdd_2p5";
-			};
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
-			reg_1p8v: sw2 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw4 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
-			reg_2p5v: ldo2 {
-				regulator-name = "vdd2p5";
-				regulator-min-microvolt = <2490375>;
-				regulator-max-microvolt = <2490375>;
-				lltc,fb-voltage-divider = <487000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay"; };
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_5p0v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x13059
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
deleted file mode 100644
index 7f16c602cc075..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ /dev/null
@@ -1,738 +0,0 @@
-/*
- * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi>;
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@0 {
-				gw,mode = <0>;
-				reg = <0x00>;
-				label = "temp";
-			};
-
-			channel@2 {
-				gw,mode = <1>;
-				reg = <0x02>;
-				label = "vdd_vin";
-			};
-
-			channel@5 {
-				gw,mode = <1>;
-				reg = <0x05>;
-				label = "vdd_3p3";
-			};
-
-			channel@8 {
-				gw,mode = <1>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@b {
-				gw,mode = <1>;
-				reg = <0x0b>;
-				label = "vdd_5p0";
-			};
-
-			channel@e {
-				gw,mode = <1>;
-				reg = <0xe>;
-				label = "vdd_arm";
-			};
-
-			channel@11 {
-				gw,mode = <1>;
-				reg = <0x11>;
-				label = "vdd_soc";
-			};
-
-			channel@14 {
-				gw,mode = <1>;
-				reg = <0x14>;
-				label = "vdd_3p0";
-			};
-
-			channel@17 {
-				gw,mode = <1>;
-				reg = <0x17>;
-				label = "vdd_1p5";
-			};
-
-			channel@1d {
-				gw,mode = <1>;
-				reg = <0x1d>;
-				label = "vdd_1p8a";
-			};
-
-			channel@20 {
-				gw,mode = <1>;
-				reg = <0x20>;
-				label = "vdd_1p0b";
-			};
-
-			channel@26 {
-				gw,mode = <1>;
-				reg = <0x26>;
-				label = "vdd_an1";
-			};
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	magn@1c {
-		compatible = "st,lsm9ds1-magn";
-		reg = <0x1c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mag>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
-	};
-
-	imu@6a {
-		compatible = "st,lsm9ds1-imu";
-		reg = <0x6a>;
-		st,drdy-int-pin = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_imu>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw2 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_3P3 (1+R1/R2 = 1.281) */
-			reg_3p3v: sw4 {
-				regulator-name = "vdd3p3";
-				regulator-min-microvolt = <1880000>;
-				regulator-max-microvolt = <3647000>;
-				lltc,fb-voltage-divider = <200000 56200>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */
-			reg_1p8a: ldo2 {
-				regulator-name = "vdd1p8a";
-				regulator-min-microvolt = <1816125>;
-				regulator-max-microvolt = <1816125>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8b: microSD VDD_1P8 */
-			reg_1p8b: ldo3 {
-				regulator-name = "vdd1p8b";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	adv7180: camera@20 {
-		compatible = "adi,adv7180";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_adv7180>;
-		reg = <0x20>;
-		powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
-
-		port {
-			adv7180_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <8>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
-	bus-width = <8>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_adv7180: adv7180grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x0001b0b0
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x4001b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_hdmi: hdmigrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_imu: imugrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
-			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
-			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-		>;
-	};
-
-	pinctrl_mag: maggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
-			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
deleted file mode 100644
index 46cf4080fec38..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ /dev/null
@@ -1,931 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		ssi0 = &ssi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight-display {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <
-			0  1  2  3  4  5  6  7  8  9
-			10 11 12 13 14 15 16 17 18 19
-			20 21 22 23 24 25 26 27 28 29
-			30 31 32 33 34 35 36 37 38 39
-			40 41 42 43 44 45 46 47 48 49
-			50 51 52 53 54 55 56 57 58 59
-			60 61 62 63 64 65 66 67 68 69
-			70 71 72 73 74 75 76 77 78 79
-			80 81 82 83 84 85 86 87 88 89
-			90 91 92 93 94 95 96 97 98 99
-			100
-			>;
-		default-brightness-level = <100>;
-	};
-
-	backlight-keypad {
-		compatible = "gpio-backlight";
-		gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		default-on;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: led-user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_12p0v: regulator-12p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "12P0V";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_1p4v: regulator-vddsoc {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_soc";
-		regulator-min-microvolt = <1400000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "fsl,imx6q-ventana-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "sgtl5000-audio";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@0 {
-				gw,mode = <0>;
-				reg = <0x00>;
-				label = "temp";
-			};
-
-			channel@2 {
-				gw,mode = <1>;
-				reg = <0x02>;
-				label = "vdd_vin";
-			};
-
-			channel@5 {
-				gw,mode = <1>;
-				reg = <0x05>;
-				label = "vdd_3p3";
-			};
-
-			channel@8 {
-				gw,mode = <1>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@b {
-				gw,mode = <1>;
-				reg = <0x0b>;
-				label = "vdd_5p0";
-			};
-
-			channel@e {
-				gw,mode = <1>;
-				reg = <0xe>;
-				label = "vdd_arm";
-			};
-
-			channel@11 {
-				gw,mode = <1>;
-				reg = <0x11>;
-				label = "vdd_soc";
-			};
-
-			channel@14 {
-				gw,mode = <1>;
-				reg = <0x14>;
-				label = "vdd_3p0";
-			};
-
-			channel@17 {
-				gw,mode = <1>;
-				reg = <0x17>;
-				label = "vdd_1p5";
-			};
-
-			channel@1d {
-				gw,mode = <1>;
-				reg = <0x1d>;
-				label = "vdd_1p8";
-			};
-
-			channel@20 {
-				gw,mode = <1>;
-				reg = <0x20>;
-				label = "vdd_an1";
-			};
-
-			channel@23 {
-				gw,mode = <1>;
-				reg = <0x23>;
-				label = "vdd_2p5";
-			};
-
-			channel@26 {
-				gw,mode = <1>;
-				reg = <0x26>;
-				label = "vdd_gps";
-			};
-
-			channel@29 {
-				gw,mode = <1>;
-				reg = <0x29>;
-				label = "vdd_an2";
-			};
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	ds1672: rtc@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_1p8v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	magn@1c {
-		compatible = "st,lsm9ds1-magn";
-		reg = <0x1c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mag>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
-	};
-
-	tca8418: keypad@34 {
-		compatible = "ti,tca8418";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_keypad>;
-		reg = <0x34>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-		linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0)
-			         MATRIX_KEY(0x00, 0x00, BTN_1)
-			         MATRIX_KEY(0x01, 0x01, BTN_2)
-			         MATRIX_KEY(0x01, 0x00, BTN_3)
-			         MATRIX_KEY(0x02, 0x00, BTN_4)
-			         MATRIX_KEY(0x00, 0x03, BTN_5)
-			         MATRIX_KEY(0x00, 0x02, BTN_6)
-			         MATRIX_KEY(0x01, 0x03, BTN_7)
-			         MATRIX_KEY(0x01, 0x02, BTN_8)
-			         MATRIX_KEY(0x02, 0x02, BTN_9)
-		>;
-		keypad,num-rows = <4>;
-		keypad,num-columns = <4>;
-	};
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		reg = <0x3c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw2 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.931) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <796551>;
-				regulator-max-microvolt = <1544827>;
-				lltc,fb-voltage-divider = <243000 261000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-				linux,phandle = <&reg_vdd_arm>;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
-			reg_1p8v: sw4 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */
-			reg_1p0v: ldo2 {
-				regulator-name = "vdd1p0";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1050000>;
-				lltc,fb-voltage-divider = <78700 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_AUD_1P8: Audio codec */
-			reg_aud_1p8v: ldo3 {
-				regulator-name = "vdd1p8a";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	imu@6a {
-		compatible = "st,lsm9ds1-imu";
-		reg = <0x6a>;
-		st,drdy-int-pin = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_imu>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	egalax_ts: touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&ldb {
-	fsl,dual-channel;
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <8>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			/* AUD4 */
-			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
-			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x110b0
-			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
-			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
-			/* AUD6 */
-			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x130b0
-			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x130b0
-			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x130b0
-			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x130b0
-		>;
-	};
-
-	pinctrl_ecspi3: escpi3grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
-		>;
-	};
-
-	pinctrl_flexcan: flexcangrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x4001b0b0 /* DIOI2C_DIS# */
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x0001b0b0 /* LVDS_TOUCH_IRQ# */
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x0001b0b0 /* LVDS_BACKEN */
-		>;
-	};
-
-	pinctrl_imu: imugrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x1b0b0
-		>;
-	};
-
-	pinctrl_keypad: keypadgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x0001b0b0 /* KEYPAD_IRQ# */
-			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x0001b0b0 /* KEYPAD_LED_EN */
-		>;
-	};
-
-	pinctrl_mag: maggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b0
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b0    /* PCI_RST# */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbh1: usbh1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* USBHUB_RST# */
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x170f9
-			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x170f9
-			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x170f9
-			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x170f9
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
deleted file mode 100644
index a74cde0501589..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ /dev/null
@@ -1,793 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <
-			0  1  2  3  4  5  6  7  8  9
-			10 11 12 13 14 15 16 17 18 19
-			20 21 22 23 24 25 26 27 28 29
-			30 31 32 33 34 35 36 37 38 39
-			40 41 42 43 44 45 46 47 48 49
-			50 51 52 53 54 55 56 57 58 59
-			60 61 62 63 64 65 66 67 68 69
-			70 71 72 73 74 75 76 77 78 79
-			80 81 82 83 84 85 86 87 88 89
-			90 91 92 93 94 95 96 97 98 99
-			100
-			>;
-		default-brightness-level = <100>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 30 0>;
-		enable-active-high;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_12p0: regulator-12p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "12P0V";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-tlv320";
-		model = "imx-tlv320";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&tlv320aic3105>;
-		/* routing of sink, source */
-		audio-routing =
-			/* TLV320 LINE1L pin <-> Mic Jack connector */
-			"LINE1L", "Mic Jack",
-			/* board Headphone Jack <-> HPOUT */
-			"Headphone Jack", "HPLOUT",
-			"Headphone Jack", "HPROUT",
-			"Mic Jack", "Mic Bias";
-		mux-int-port = <1>;
-		mux-ext-port = <6>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@0 {
-				gw,mode = <0>;
-				reg = <0x00>;
-				label = "temp";
-			};
-
-			channel@2 {
-				gw,mode = <1>;
-				reg = <0x02>;
-				label = "vdd_vin";
-			};
-
-			channel@5 {
-				gw,mode = <1>;
-				reg = <0x05>;
-				label = "vdd_3p3";
-			};
-
-			channel@8 {
-				gw,mode = <1>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@b {
-				gw,mode = <1>;
-				reg = <0x0b>;
-				label = "vdd_5p0";
-			};
-
-			channel@e {
-				gw,mode = <1>;
-				reg = <0xe>;
-				label = "vdd_arm";
-			};
-
-			channel@11 {
-				gw,mode = <1>;
-				reg = <0x11>;
-				label = "vdd_soc";
-			};
-
-			channel@14 {
-				gw,mode = <1>;
-				reg = <0x14>;
-				label = "vdd_3p0";
-			};
-
-			channel@17 {
-				gw,mode = <1>;
-				reg = <0x17>;
-				label = "vdd_1p5";
-			};
-
-			channel@1d {
-				gw,mode = <1>;
-				reg = <0x1d>;
-				label = "vdd_1p8";
-			};
-
-			channel@20 {
-				gw,mode = <1>;
-				reg = <0x20>;
-				label = "vdd_an1";
-			};
-
-			channel@23 {
-				gw,mode = <1>;
-				reg = <0x23>;
-				label = "vdd_2p5";
-			};
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	dts1672: rtc@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_1P8 (1+R1/R2 = 2.505): Aud/eMMC/microSD/Touch */
-			reg_1p8v: sw1 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw2 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-				linux,phandle = <&reg_vdd_arm>;
-			};
-
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw4 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-				linux,phandle = <&reg_vdd_soc>;
-			};
-
-			/* VDD_1P0 (1+R1/R2 = 1.38): */
-			reg_1p0v: ldo2 {
-				regulator-name = "vdd1p0";
-				regulator-min-microvolt = <1002777>;
-				regulator-max-microvolt = <1002777>;
-				lltc,fb-voltage-divider = <100000 261000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	tlv320aic3105: codec@18 {
-		compatible = "ti,tlv320aic3x";
-		reg = <0x18>;
-		reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
-		/* Regulators */
-		DRVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_3p3v>;
-		IOVDD-supply = <&reg_3p3v>;
-		DVDD-supply = <&reg_1p8v>;
-	};
-
-	accelerometer@1d {
-		compatible = "fsl,mma8451";
-		reg = <0x1d>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <11 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "INT2";
-	};
-
-	/* headphone detect */
-	ts3a227e@3b {
-		compatible = "ti,ts3a227e";
-		reg = <0x3b>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-		ti,micbias = <4>; /* 2.5V micbias */
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: g101evn010 {
-				clock-frequency = <68930000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_200mhz>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	max-frequency = <100000000>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x130b0
-			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x130b0
-			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x130b0
-			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x130b0
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* MCK */
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x4001b0b0 /* PHY_EN */
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			/* I2C3 */
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-
-			/* Headphone Detect */
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x0001b0b0 /* HPDET_IRQ# */
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x0001b0b0 /* HPDET_MIC# */
-
-			/* Codec */
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x0001b0b0 /* CODEC_RST# */
-
-			/* Touch Controller */
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x0001b0b0 /* TOUCH_IRQ# */
-			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x0001b0b0 /* TOUCH_RST */
-
-			/* Stow Sensor */
-			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x0001b0b0 /* ACCEL_IRQ2 */
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x0001b0b0 /* ACCEL_IRQ1 */
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b1 /* TXEN */
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x4001b0b0 /* PWR_EN */
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x4001b0b0 /* EMMY_EN */
-			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x4001b0b0 /* EMMY_CFG1# */
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05		0x4001b0b0 /* EMMY_CFG2# */
-			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x0001b0b0 /* EMMY_BTWAKE# */
-			MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x0001b0b0 /* EMMY_WFWAKE# */
-
-			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
-			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x17059 /* CD */
-			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x170b9 /* CD */
-			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x170f9 /* CD */
-			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x170f9
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_RST__SD3_RESET		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
deleted file mode 100644
index 9fc79af2bc9aa..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ /dev/null
@@ -1,815 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: led-user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_1p0v: regulator-1p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P0V";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@0 {
-			compatible = "marvell,mv88e6085";
-			reg = <0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan4";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan3";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan1";
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "cpu";
-					ethernet = <&fec>;
-				};
-			};
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@0 {
-				gw,mode = <0>;
-				reg = <0x00>;
-				label = "temp";
-			};
-
-			channel@2 {
-				gw,mode = <1>;
-				reg = <0x02>;
-				label = "vdd_vin";
-			};
-
-			channel@5 {
-				gw,mode = <1>;
-				reg = <0x05>;
-				label = "vdd_3p3";
-			};
-
-			channel@8 {
-				gw,mode = <1>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@b {
-				gw,mode = <1>;
-				reg = <0x0b>;
-				label = "vdd_5p0";
-			};
-
-			channel@e {
-				gw,mode = <1>;
-				reg = <0xe>;
-				label = "vdd_arm";
-			};
-
-			channel@11 {
-				gw,mode = <1>;
-				reg = <0x11>;
-				label = "vdd_soc";
-			};
-
-			channel@14 {
-				gw,mode = <1>;
-				reg = <0x14>;
-				label = "vdd_3p0";
-			};
-
-			channel@17 {
-				gw,mode = <1>;
-				reg = <0x17>;
-				label = "vdd_1p5";
-			};
-
-			channel@1d {
-				gw,mode = <1>;
-				reg = <0x1d>;
-				label = "vdd_1p8";
-			};
-
-			channel@20 {
-				gw,mode = <1>;
-				reg = <0x20>;
-				label = "vdd_an1";
-			};
-
-			channel@23 {
-				gw,mode = <1>;
-				reg = <0x23>;
-				label = "vdd_2p5";
-			};
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	dts1672: rtc@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	magn@1c {
-		compatible = "st,lsm9ds1-magn";
-		reg = <0x1c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mag>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
-	};
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */
-			reg_1p8v: sw2 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw4 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
-			reg_2p5v: ldo2 {
-				regulator-name = "vdd2p5";
-				regulator-min-microvolt = <2490375>;
-				regulator-max-microvolt = <2490375>;
-				lltc,fb-voltage-divider = <487000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	crypto@60 {
-		compatible = "atmel,atecc508a";
-		reg = <0x60>;
-	};
-
-	imu@6a {
-		compatible = "st,lsm9ds1-imu";
-		reg = <0x6a>;
-		st,drdy-int-pin = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_imu>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	egalax_ts: touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_imu: imugrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
-		>;
-	};
-
-	pinctrl_mag: maggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0 /* PCIE RST */
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0 /* PMIC_IRQ# */
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART3_CTS_B         0x1b0b1
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
-			MX6QDL_PAD_EIM_D31__UART3_RTS_B         0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA    0x1b0b1
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA    0x1b0b1
-			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B      0x1b0b1
-			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B      0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_RST__SD3_RESET		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
deleted file mode 100644
index 955a51226eda7..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ /dev/null
@@ -1,536 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 Gateworks Corporation
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@0 {
-				gw,mode = <0>;
-				reg = <0x00>;
-				label = "temp";
-			};
-
-			channel@2 {
-				gw,mode = <1>;
-				reg = <0x02>;
-				label = "vdd_vin";
-			};
-
-			channel@5 {
-				gw,mode = <1>;
-				reg = <0x05>;
-				label = "vdd_3p3";
-			};
-
-			channel@8 {
-				gw,mode = <1>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@b {
-				gw,mode = <1>;
-				reg = <0x0b>;
-				label = "vdd_5p0";
-			};
-
-			channel@e {
-				gw,mode = <1>;
-				reg = <0xe>;
-				label = "vdd_arm";
-			};
-
-			channel@11 {
-				gw,mode = <1>;
-				reg = <0x11>;
-				label = "vdd_soc";
-			};
-
-			channel@14 {
-				gw,mode = <1>;
-				reg = <0x14>;
-				label = "vdd_3p0";
-			};
-
-			channel@17 {
-				gw,mode = <1>;
-				reg = <0x17>;
-				label = "vdd_1p5";
-			};
-
-			channel@1d {
-				gw,mode = <1>;
-				reg = <0x1d>;
-				label = "vdd_1p8";
-			};
-
-			channel@20 {
-				gw,mode = <1>;
-				reg = <0x20>;
-				label = "vdd_an1";
-			};
-
-			channel@23 {
-				gw,mode = <1>;
-				reg = <0x23>;
-				label = "vdd_2p5";
-			};
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	gpio@20 {
-		compatible = "nxp,pca9555";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	adc@48 {
-		compatible = "ti,ads1015";
-		reg = <0x48>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@4 {
-			reg = <4>;
-			ti,gain = <0>;
-			ti,datarate = <5>;
-		};
-
-		channel@5 {
-			reg = <5>;
-			ti,gain = <0>;
-			ti,datarate = <5>;
-		};
-
-		channel@6 {
-			reg = <6>;
-			ti,gain = <0>;
-			ti,datarate = <5>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
deleted file mode 100644
index 218d6e667ed24..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ /dev/null
@@ -1,664 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 Gateworks Corporation
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: led-user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_wl: regulator-wl {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_wl>;
-		compatible = "regulator-fixed";
-		regulator-name = "wl";
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <100>;
-		enable-active-high;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@6 {
-				gw,mode = <0>;
-				reg = <0x06>;
-				label = "temp";
-			};
-
-			channel@8 {
-				gw,mode = <3>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@82 {
-				gw,mode = <2>;
-				reg = <0x82>;
-				label = "vdd_vin";
-				gw,voltage-divider-ohms = <22100 1000>;
-				gw,voltage-offset-microvolt = <800000>;
-			};
-
-			channel@84 {
-				gw,mode = <2>;
-				reg = <0x84>;
-				label = "vdd_5p0";
-				gw,voltage-divider-ohms = <22100 10000>;
-			};
-
-			channel@86 {
-				gw,mode = <2>;
-				reg = <0x86>;
-				label = "vdd_3p3";
-				gw,voltage-divider-ohms = <10000 10000>;
-			};
-
-			channel@88 {
-				gw,mode = <2>;
-				reg = <0x88>;
-				label = "vdd_2p5";
-				gw,voltage-divider-ohms = <10000 10000>;
-			};
-
-			channel@8c {
-				gw,mode = <2>;
-				reg = <0x8c>;
-				label = "vdd_3p0";
-			};
-
-			channel@8e {
-				gw,mode = <2>;
-				reg = <0x8e>;
-				label = "vdd_arm";
-			};
-
-			channel@90 {
-				gw,mode = <2>;
-				reg = <0x90>;
-				label = "vdd_soc";
-			};
-
-			channel@92 {
-				gw,mode = <2>;
-				reg = <0x92>;
-				label = "vdd_1p5";
-			};
-
-			channel@98 {
-				gw,mode = <2>;
-				reg = <0x98>;
-				label = "vdd_1p8";
-			};
-
-			channel@9a {
-				gw,mode = <2>;
-				reg = <0x9a>;
-				label = "vdd_1p0";
-				gw,voltage-divider-ohms = <10000 10000>;
-			};
-
-			channel@9c {
-				gw,mode = <2>;
-				reg = <0x9c>;
-				label = "vdd_an1";
-				gw,voltage-divider-ohms = <10000 10000>;
-			};
-
-			channel@a2 {
-				gw,mode = <2>;
-				reg = <0xa2>;
-				label = "vdd_gsc";
-				gw,voltage-divider-ohms = <10000 10000>;
-			};
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	accel@19 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_accel>;
-		compatible = "st,lis2de12";
-		reg = <0x19>;
-		st,drdy-int-pin = <1>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <13 0>;
-		interrupt-names = "INT1";
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-/* off-board RS232 */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-/* serial console */
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-/* cc1352 */
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* Sterling-LWB Bluetooth */
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>;
-	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4330-bt";
-		shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-/* GPS */
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_5p0v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-/* Sterling-LWB SDIO WiFi */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_wl>;
-	non-removable;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_accel: accelmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
-		>;
-	};
-
-	pinctrl_bten: btengrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
-		>;
-	};
-
-	pinctrl_ecspi3: escpi3grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_reg_wl: regwlgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x4001b0b1 /* DIO20 */
-			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x4001b0b1 /* DIO14 */
-			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x4001b0b1 /* DIO15 */
-			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1 /* TMS */
-			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1 /* TCK */
-			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1 /* TDO */
-			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1 /* TDI */
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x4001b0b1 /* RST# */
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
deleted file mode 100644
index 40e235e315cc4..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ /dev/null
@@ -1,606 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 Gateworks Corporation
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: led-user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_vbus: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@0 {
-				gw,mode = <0>;
-				reg = <0x00>;
-				label = "temp";
-			};
-
-			channel@2 {
-				gw,mode = <1>;
-				reg = <0x02>;
-				label = "vdd_vin";
-			};
-
-			channel@5 {
-				gw,mode = <1>;
-				reg = <0x05>;
-				label = "vdd_3p3";
-			};
-
-			channel@8 {
-				gw,mode = <1>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@b {
-				gw,mode = <1>;
-				reg = <0x0b>;
-				label = "vdd_5p0";
-			};
-
-			channel@e {
-				gw,mode = <1>;
-				reg = <0xe>;
-				label = "vdd_arm";
-			};
-
-			channel@11 {
-				gw,mode = <1>;
-				reg = <0x11>;
-				label = "vdd_soc";
-			};
-
-			channel@14 {
-				gw,mode = <1>;
-				reg = <0x14>;
-				label = "vdd_3p0";
-			};
-
-			channel@17 {
-				gw,mode = <1>;
-				reg = <0x17>;
-				label = "vdd_1p5";
-			};
-
-			channel@1d {
-				gw,mode = <1>;
-				reg = <0x1d>;
-				label = "vdd_1p8";
-			};
-
-			channel@20 {
-				gw,mode = <1>;
-				reg = <0x20>;
-				label = "vdd_1p0";
-			};
-
-			channel@23 {
-				gw,mode = <1>;
-				reg = <0x23>;
-				label = "vdd_2p5";
-			};
-		};
-
-		fan-controller@a {
-			compatible = "gw,gsc-fan";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0a>;
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	accel@19 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_accel>;
-		compatible = "st,lis2de12";
-		reg = <0x19>;
-		st,drdy-int-pin = <1>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <13 0>;
-		interrupt-names = "INT1";
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
-	status = "disabled";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	rts-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	no-1-8-v; /* firmware will remove if board revision supports */
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&wdog2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_accel: accelmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi2: escpi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x4001b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
deleted file mode 100644
index 82f47c295b085..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ /dev/null
@@ -1,498 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 Gateworks Corporation
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@6 {
-				gw,mode = <0>;
-				reg = <0x06>;
-				label = "temp";
-			};
-
-			channel@8 {
-				gw,mode = <3>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@82 {
-				gw,mode = <2>;
-				reg = <0x82>;
-				label = "vdd_vin";
-				gw,voltage-divider-ohms = <22100 1000>;
-				gw,voltage-offset-microvolt = <800000>;
-			};
-
-			channel@84 {
-				gw,mode = <2>;
-				reg = <0x84>;
-				label = "vdd_5p0";
-				gw,voltage-divider-ohms = <22100 10000>;
-			};
-
-			channel@86 {
-				gw,mode = <2>;
-				reg = <0x86>;
-				label = "vdd_3p3";
-				gw,voltage-divider-ohms = <10000 10000>;
-			};
-
-			channel@88 {
-				gw,mode = <2>;
-				reg = <0x88>;
-				label = "vdd_2p5";
-				gw,voltage-divider-ohms = <10000 10000>;
-			};
-
-			channel@8c {
-				gw,mode = <2>;
-				reg = <0x8c>;
-				label = "vdd_arm";
-			};
-
-			channel@8e {
-				gw,mode = <2>;
-				reg = <0x8e>;
-				label = "vdd_soc";
-			};
-
-			channel@90 {
-				gw,mode = <2>;
-				reg = <0x90>;
-				label = "vdd_1p5";
-			};
-
-			channel@92 {
-				gw,mode = <2>;
-				reg = <0x92>;
-				label = "vdd_1p0";
-			};
-
-			channel@98 {
-				gw,mode = <2>;
-				reg = <0x98>;
-				label = "vdd_3p0";
-			};
-
-			channel@9a {
-				gw,mode = <2>;
-				reg = <0x9a>;
-				label = "vdd_an1";
-				gw,voltage-divider-ohms = <10000 10000>;
-			};
-
-			channel@a2 {
-				gw,mode = <2>;
-				reg = <0xa2>;
-				label = "vdd_gsc";
-				gw,voltage-divider-ohms = <10000 10000>;
-			};
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
deleted file mode 100644
index 2ffb21dd89f2a..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
-	};
-
-	v_3v2: regulator-v-3v2 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "v_3v2";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_5v0: regulator-v-5v0 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_5v0";
-	};
-
-	v_sd: regulator-v-sd {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_vmmc>;
-		regulator-boot-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "v_sd";
-		startup-delay-us = <1000>;
-		vin-supply = <&v_3v2>;
-	};
-
-	v_usb2: regulator-v-usb2 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb2";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb1: regulator-v-usb1 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb1";
-		vin-supply = <&v_5v0>;
-	};
-
-	audio: sound-sgtl5000 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "On-board Codec";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_codec>;
-		simple-audio-card,frame-master = <&sound_codec>;
-		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Headphone Jack",
-			"Headphone Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-
-		sound_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		sound_codec: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "On-board SPDIF";
-		/* IMX6 doesn't implement this yet */
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
-		>;
-	};
-
-	pins5 {
-		fsl,audmux-port = <4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
-	status = "okay";
-
-	/* Pro baseboard model */
-	rtc@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	/* Pro baseboard model */
-	sgtl5000: codec@a {
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		VDDA-supply = <&v_3v2>;
-		VDDIO-supply = <&v_3v2>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	hummingboard {
-		pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
-				MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
-			>;
-		};
-
-		pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard_hdmi: hummingboard-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard_pwm1: pwm1grp {
-			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
-		};
-
-		pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
-				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
-			>;
-		};
-
-		pinctrl_hummingboard_spdif: hummingboard-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
-		};
-
-		pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
-			/*
-			 * We want it pulled down for a fixed host connection.
-			 */
-			fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>;
-		};
-
-		pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-			>;
-		};
-
-		pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-		pinctrl_hummingboard_vmmc: hummingboard-vmmc {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
-	reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	 pinctrl-names = "default";
-	 pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
-	 status = "okay";
-};
-
-&pwm2 {
-	 pinctrl-names = "default";
-	 status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&v_usb2>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
-	vbus-supply = <&v_usb1>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pinctrl_hummingboard_usdhc2_aux
-		&pinctrl_hummingboard_usdhc2
-	>;
-	vmmc-supply = <&v_sd>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&vcc_3v3 {
-	vin-supply = <&v_3v2>;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi
deleted file mode 100644
index f400405381a72..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Device Tree file for SolidRun HummingBoard2
- * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-&iomuxc {
-	hummingboard2 {
-		pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
-			>;
-		};
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_usdhc3>;
-	vmmc-supply = <&v_3v2>;
-	vqmmc-supply = <&v_3v2>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
deleted file mode 100644
index eb1ad28946d36..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ /dev/null
@@ -1,577 +0,0 @@
-/*
- * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
-		linux,rc-map-name = "rc-rc6-mce";
-	};
-
-	v_3v2: regulator-v-3v2 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "v_3v2";
-	};
-
-	v_5v0: regulator-v-5v0 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_5v0";
-	};
-
-	vcc_1p8: regulator-vcc-1p8 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <1800000>;
-		regulator-min-microvolt = <1800000>;
-		regulator-name = "vcc_1p8";
-		vin-supply = <&v_3v2>;
-	};
-
-	v_sd: regulator-v-sd {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
-		regulator-boot-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "v_sd";
-		startup-delay-us = <1000>;
-		vin-supply = <&v_3v2>;
-	};
-
-	v_usb1: regulator-v-usb1 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb1";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb2: regulator-v-usb2 {
-		/* USB hub port 1 */
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb2";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb3: regulator-v-usb3 {
-		/* USB hub port 3 */
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb3";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb4: regulator-v-usb4 {
-		/* USB hub port 4 */
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb4";
-		vin-supply = <&v_5v0>;
-	};
-
-	audio: sound-sgtl5000 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "On-board Codec";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_codec>;
-		simple-audio-card,frame-master = <&sound_codec>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-
-		sound_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		sound_codec: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
-		>;
-	};
-
-	pins5 {
-		fsl,audmux-port = <4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-		>;
-	};
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_i2c1>;
-	status = "okay";
-
-	pcf8523: rtc@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	sgtl5000: codec@a {
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		compatible = "fsl,sgtl5000";
-		#sound-dai-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
-		reg = <0x0a>;
-		VDDA-supply = <&v_3v2>;
-		VDDD-supply = <&vcc_1p8>;
-		VDDIO-supply = <&v_3v2>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hummingboard2 {
-		pinctrl_hog: hoggrp {
-		fsl,pins = <
-				/*
-				 * 36 pin headers GPIO description. The pins
-				 * numbering as following -
-				 *
-				 * 	3.2v	5v	74	75
-				 *	73	72	71	70
-				 *	69	68	67	66
-				 *
-				 *	77	78	79	76
-				 *	65	64	61	60
-				 *	53	52	51	50
-				 *	49	48	166	132
-				 *	95	94	90	91
-				 *	GND	54	24	204
-				 *
-				 * The GPIO numbers can be extracted using
-				 * signal name from below.
-				 * Example -
-				 * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is
-				 * GPIO(3,10) which is (3-1)*32+10 = gpio 74
-				 *
-				 * i.e. The mapping of GPIO(X,Y) to Linux gpio
-				 * number is : gpio number = (X-1) * 32 + Y
-				 */
-				/* DI1_PIN15 */
-				MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1
-				/* DI1_PIN02 */
-				MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1
-				/* DISP1_DATA00 */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1
-				/* DISP1_DATA01 */
-				MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1
-				/* DISP1_DATA02 */
-				MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1
-				/* DISP1_DATA03 */
-				MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1
-				/* DISP1_DATA04 */
-				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1
-				/* DISP1_DATA05 */
-				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1
-				/* DISP1_DATA06 */
-				MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1
-				/* DISP1_DATA07 */
-				MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1
-				/* DI1_D0_CS */
-				MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1
-				/* DI1_D1_CS */
-				MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1
-				/* DI1_PIN01 */
-				MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1
-				/* DI1_PIN03 */
-				MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1
-				/* DISP1_DATA08 */
-				MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1
-				/* DISP1_DATA09 */
-				MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1
-				/* DISP1_DATA10 */
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1
-				/* DISP1_DATA11 */
-				MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1
-				/* DISP1_DATA12 */
-				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1
-				/* DISP1_DATA13 */
-				MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1
-				/* DISP1_DATA14 */
-				MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1
-				/* DISP1_DATA15 */
-				MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1
-				/* DISP1_DATA16 */
-				MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1
-				/* DISP1_DATA17 */
-				MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1
-				/* DISP1_DATA18 */
-				MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1
-				/* DISP1_DATA19 */
-				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1
-				/* DISP1_DATA20 */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1
-				/* DISP1_DATA21 */
-				MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1
-				/* DISP1_DATA22 */
-				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1
-				/* DISP1_DATA23 */
-				MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1
-				/* DI1_DISP_CLK */
-				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1
-				/* SPDIF_IN */
-				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1
-				/* SPDIF_OUT */
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1
-
-				/* MikroBUS GPIO pin number 10 */
-				MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1
-			>;
-		};
-
-		pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
-				MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x000b1 /* CS */
-			>;
-		};
-
-		pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000
-			>;
-		};
-
-		pinctrl_hummingboard2_hdmi: hummingboard2-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard2_mipi: hummingboard2_mipi {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1
-				MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1
-				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
-			>;
-		};
-
-		pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard2_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard2_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
-				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
-			>;
-		};
-
-		pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus {
-			fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus {
-			fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id {
-			/*
-			 * We want it pulled down for a fixed host connection.
-			 */
-			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
-		};
-
-		pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
-			>;
-		};
-
-		pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-
-		pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170b9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100b9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
-			>;
-		};
-
-		pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170f9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100f9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
-			>;
-		};
-
-		pinctrl_hummingboard2_vmmc: hummingboard2-vmmc {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
-			>;
-		};
-
-		pinctrl_hummingboard2_uart3: hummingboard2-uart3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D25__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D24__UART3_RX_DATA	0x40013000
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>;
-	reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_pwm3>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
-	vbus-supply = <&v_usb1>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <
-		&pinctrl_hummingboard2_usdhc2_aux
-		&pinctrl_hummingboard2_usdhc2
-	>;
-	pinctrl-1 = <
-		&pinctrl_hummingboard2_usdhc2_aux
-		&pinctrl_hummingboard2_usdhc2_100mhz
-	>;
-	pinctrl-2 = <
-		&pinctrl_hummingboard2_usdhc2_aux
-		&pinctrl_hummingboard2_usdhc2_200mhz
-	>;
-	vmmc-supply = <&v_sd>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
-	status = "okay";
-};
-
-&vcc_3v3 {
-	vin-supply = <&v_3v2>;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
deleted file mode 100644
index 0fd7f2e24d9ca..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org>
- */
-
-#include "imx6qdl-icore.dtsi"
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
-		>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET_REF>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
deleted file mode 100644
index a4217f564a534..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ /dev/null
@@ -1,466 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright (C) 2015 Amarula Solutions B.V.
- * Copyright (C) 2015 Engicam S.r.l.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_sd3_vmmc: regulator-sd3-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "P3V3_SD3_SWITCHED";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		enable-active-high;
-	};
-
-	reg_sd4_vmmc: regulator-sd4-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "P3V3_SD4_SWITCHED";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	usb_hub: usb-hub {
-		compatible = "smsc,usb3503a";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbhub>;
-		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>;
-		clock-names = "refclk";
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "imx6qdl-icore-rqs-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphone Jack",
-			"Line", "Line In Jack",
-			"Speaker", "Line Out Jack",
-			"Speaker", "Ext Spk";
-		simple-audio-card,routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	audmux_ssi1 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSDIR |
-			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
-			IMX_AUDMUX_V2_PTCR_TCLKDIR |
-			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
-			IMX_AUDMUX_V2_PTCR_SYN)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
-		>;
-	};
-
-	audmux_aud4 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	xceiver-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-handle = <&eth_phy>;
-	phy-mode = "rgmii";
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		eth_phy: ethernet-phy@0 {
-			reg = <0x0>;
-			rxc-skew-ps = <1140>;
-			txc-skew-ps = <1140>;
-			txen-skew-ps = <600>;
-			rxdv-skew-ps = <240>;
-			rxd0-skew-ps = <420>;
-			rxd1-skew-ps = <600>;
-			rxd2-skew-ps = <420>;
-			rxd3-skew-ps = <240>;
-			txd0-skew-ps = <60>;
-			txd1-skew-ps = <60>;
-			txd2-skew-ps = <60>;
-			txd3-skew-ps = <240>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		#sound-dai-cells = <0>;
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-		VDDD-supply = <&reg_1p8v>;
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ssi1 {
-	fsl,mode = "i2s-slave";
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	disable-over-current;
-	clocks = <&clks IMX6QDL_CLK_USBOH3>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	vmcc-supply = <&reg_sd3_vmmc>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
-	vmcc-supply = <&reg_sd4_vmmc>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
-			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
-			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
-			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
-		>;
-	};
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
-			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f059	/* PCIe Reset */
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbhub: usbhubgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06  0x1f059	/* HUB USB Reset */
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17070
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10070
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1f059	/* CD */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1f059	/* PWR */
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170B1
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100B1
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B1
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B1
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B1
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B1
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170F9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100F9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17070
-			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10070
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070
-		>;
-	};
-
-	pinctrl_usdhc4_100mhz: usdhc4grp_100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170B1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100B1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170B1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170B1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170B1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170B1
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170B1
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170B1
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170B1
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170B1
-		>;
-	};
-
-	pinctrl_usdhc4_200mhz: usdhc4grp_200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170F9
-			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100F9
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170F9
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170F9
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170F9
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170F9
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170F9
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170F9
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170F9
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170F9
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
deleted file mode 100644
index 23c318d9636fc..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ /dev/null
@@ -1,431 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 100000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	rmii_clk: clock-rmii-clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;  /* 25MHz for example */
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "imx6qdl-icore-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphone Jack",
-			"Line", "Line In Jack",
-			"Speaker", "Line Out Jack",
-			"Speaker", "Ext Spk";
-		simple-audio-card,routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-
-	audmux_ssi1 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSDIR |
-			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
-			IMX_AUDMUX_V2_PTCR_TCLKDIR |
-			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
-			IMX_AUDMUX_V2_PTCR_SYN)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
-		>;
-	};
-
-	audmux_aud4 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_3p3v>;
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_3p3v>;
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
-	phy-mode = "rmii";
-	phy-handle = <&eth_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		eth_phy: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <4000>;
-			reset-deassert-us = <4000>;
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	ov5640: camera@3c {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xclk";
-		DOVDD-supply = <&reg_1p8v>;
-		AVDD-supply = <&reg_3p3v>;
-		DVDD-supply = <&reg_3p3v>;
-		powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
-		status = "disabled";
-
-		port {
-			ov5640_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-
-	sgtl5000: codec@a {
-		#sound-dai-cells = <0>;
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-		VDDD-supply = <&reg_1p8v>;
-	};
-};
-
-&mipi_csi {
-	status = "disabled";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5640_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&ssi1 {
-	fsl,mode = "i2s-slave";
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	no-1-8-v;
-	non-removable;
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
-			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
-			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
-			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-			MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
-			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_ov5640: ov5640grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1	  0x130b0
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10070
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
deleted file mode 100644
index 85aeebc9485dd..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ /dev/null
@@ -1,821 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2017 (C) Priit Laes <plaes@plaes.org>
- * Copyright 2018 (C) Pengutronix, Michael Grzeschik <mgr@pengutronix.de>
- * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
- *
- * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	reg_1p0v_s0: regulator-1p0v-s0 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_1V0_S0";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_smarc_suppy>;
-	};
-
-	reg_1p35v_vcoredig_s5: regulator-1p35v-vcoredig-s5 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_1V35_VCOREDIG_S5";
-		regulator-min-microvolt = <1350000>;
-		regulator-max-microvolt = <1350000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_3p3v_s5>;
-	};
-
-	reg_1p8v_s5: regulator-1p8v-s5 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_1V8_S5";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_3p3v_s5>;
-	};
-
-	reg_3p3v_s0: regulator-3p3v-s0 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_3V3_S0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_3p3v_s5>;
-	};
-
-	reg_3p3v_s5: regulator-3p3v-s5 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_3V3_S5";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_smarc_suppy>;
-	};
-
-	reg_smarc_lcdbklt: regulator-smarc-lcdbklt {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcdbklt_en>;
-		regulator-name = "LCD_BKLT_EN";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_smarc_lcdvdd: regulator-smarc-lcdvdd {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcdvdd_en>;
-		regulator-name = "LCD_VDD_EN";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_smarc_rtc: regulator-smarc-rtc {
-		compatible = "regulator-fixed";
-		regulator-name = "V_IN_RTC_BATT";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/* Module supply range can be 3.00V ... 5.25V */
-	reg_smarc_suppy: regulator-smarc-supply {
-		compatible = "regulator-fixed";
-		regulator-name = "V_IN_WIDE";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	lcd: lcd {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd>;
-		status = "disabled";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_in: endpoint {
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_out: endpoint {
-			};
-		};
-	};
-
-	lcd_backlight: lcd-backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000 0>;
-		pwm-names = "LCD_BKLT_PWM";
-
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <4>;
-
-		power-supply = <&reg_smarc_lcdbklt>;
-		status = "disabled";
-	};
-
-	i2c_intern: i2c-gpio-intern {
-		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio_intern>;
-		sda-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>; /* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	i2c_lcd: i2c-gpio-lcd {
-		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio_lcd>;
-		sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>; /* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c_cam: i2c-gpio-cam {
-		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio_cam>;
-		sda-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>; /* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
-
-/* I2S0, I2S1 */
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-
-	audmux_ssi1 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT3) |
-			 IMX_AUDMUX_V2_PTCR_SYN    |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT3)
-		>;
-	};
-
-	audmux_adu3 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT3>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
-		>;
-	};
-
-	audmux_ssi2 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
-			 IMX_AUDMUX_V2_PTCR_SYN    |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
-		>;
-	};
-
-	audmux_adu4 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT2_SSI1)
-		>;
-	};
-};
-
-/* CAN0 */
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-};
-
-/* CAN1 */
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-};
-
-/* SPI1 */
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
-		   <&gpio2 27 GPIO_ACTIVE_LOW>;
-};
-
-/* SPI0 */
-&ecspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	/* default boot source: workaround #1 for errata ERR006282 */
-	smarc_flash: flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-	};
-};
-
-/* GBE */
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <1000>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-};
-
-&i2c_intern {
-	pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			reg_v_core_s0: sw1ab {
-				regulator-name = "V_CORE_S0";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vddsoc_s0: sw1c {
-				regulator-name = "V_VDDSOC_S0";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_3p15v_s0: sw2 {
-				regulator-name = "V_3V15_S0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* sw3a/b is used in dual mode, but driver does not
-			 * support it. Although, there's no need to control
-			 * DDR power - so just leaving dummy entries for sw3a
-			 * and sw3b for now.
-			 */
-			sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_1p8v_s0: sw4 {
-				regulator-name = "V_1V8_S0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* Regulator for USB */
-			reg_5p0v_s0: swbst {
-				regulator-name = "V_5V0_S0";
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
-			};
-
-			reg_vsnvs: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vrefddr: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/*
-			 * Per schematics, of all VGEN's, only VGEN5 has some
-			 * usage ... but even that - over DNI resistor
-			 */
-			vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			reg_2p5v_s0: vgen5 {
-				regulator-name = "V_2V5_S0";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-		};
-	};
-};
-
-/* I2C_GP */
-&i2c1 {
-	clock-frequency = <375000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-};
-
-/* HDMI_CTRL */
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-};
-
-/* I2C_PM */
-&i2c3 {
-	clock-frequency = <375000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	smarc_eeprom: eeprom@50 {
-		compatible = "atmel,24c32";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mgmt_gpios &pinctrl_gpio>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-
-			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
-			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
-			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
-			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-
-			/* AUDIO MCLK */
-			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2		0x000b0
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
-
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26  0x1b0b0 /* CS0 */
-			MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 /* CS1 */
-		>;
-	};
-
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-
-			/* SPI_IMX_CS2# - connected to internal flash */
-			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
-			/* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */
-			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio: gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA0__GPIO3_IO00	0x1b0b0	/* GPIO0 / CAM0_PWR# */
-			MX6QDL_PAD_EIM_DA1__GPIO3_IO01	0x1b0b0 /* GPIO1 / CAM1_PWR# */
-			MX6QDL_PAD_EIM_DA2__GPIO3_IO02	0x1b0b0 /* GPIO2 / CAM0_RST# */
-			MX6QDL_PAD_EIM_DA3__GPIO3_IO03	0x1b0b0 /* GPIO3 / CAM1_RST# */
-			MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x1b0b0 /* GPIO4 / HDA_RST#  */
-			MX6QDL_PAD_EIM_DA5__GPIO3_IO05	0x1b0b0 /* GPIO5 / PWM_OUT   */
-			MX6QDL_PAD_EIM_DA6__GPIO3_IO06	0x1b0b0 /* GPIO6 / TACHIN    */
-			MX6QDL_PAD_EIM_DA7__GPIO3_IO07	0x1b0b0 /* GPIO7 / PCAM_FLD  */
-			MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x1b0b0 /* GPIO8 / CAN0_ERR# */
-			MX6QDL_PAD_EIM_DA9__GPIO3_IO09	0x1b0b0 /* GPIO9 / CAN1_ERR# */
-			MX6QDL_PAD_EIM_DA10__GPIO3_IO10	0x1b0b0 /* GPIO10            */
-			MX6QDL_PAD_EIM_DA11__GPIO3_IO11	0x1b0b0 /* GPIO11            */
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b0b0 /* RST_GBE0_PHY# */
-		>;
-	};
-
-	pinctrl_i2c_gpio_cam: i2c-gpiocamgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0 /* SCL */
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0 /* SDA */
-		>;
-	};
-
-	pinctrl_i2c_gpio_intern: i2c-gpiointerngrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30  0x1b0b0 /* SCL */
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* SDA */
-		>;
-	};
-
-	pinctrl_i2c_gpio_lcd: i2c-gpiolcdgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 /* SCL */
-			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 /* SDA */
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_lcd: lcdgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00  0x100f1
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01  0x100f1
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02  0x100f1
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03  0x100f1
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04  0x100f1
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05  0x100f1
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06  0x100f1
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07  0x100f1
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08  0x100f1
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09  0x100f1
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f1
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f1
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f1
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f1
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f1
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f1
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f1
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f1
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f1
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f1
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f1
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f1
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f1
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f1
-
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f1
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x100f1 /* DE */
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x100f1 /* HSYNC */
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x100f1 /* VSYNC */
-		>;
-	};
-
-	pinctrl_lcdbklt_en: lcdbkltengrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16	0x1b0b1
-		>;
-	};
-
-	pinctrl_lcdvdd_en: lcdvddengrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
-		>;
-	};
-
-	pinctrl_mipi_csi: mipi-csigrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1	0x000b0	/* CSI0/1 MCLK */
-		>;
-	};
-
-	pinctrl_mgmt_gpios: mgmt-gpiosgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0	/* LID#           */
-			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17		0x1b0b0	/* SLEEP#         */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0	/* CHARGING#      */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0	/* CHARGER_PRSNT# */
-			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x1b0b0	/* CARRIER_STBY#  */
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0	/* BATLOW#        */
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b0	/* TEST#          */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0	/* VDD_IO_SEL_D#  */
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0 /* POWER_BTN#     */
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D18__GPIO3_IO18	0x1b0b0 /* PCI_A_PRSNT# */
-			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 /* RST_PCIE_A#  */
-			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* PCIE_WAKE#   */
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1f8b0
-			/* power, oc muxed but not used by the driver */
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0 /* USB power */
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0 /* USB OC */
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CLK__SD3_CLK 0x17059
-			MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
-			MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
-		>;
-	};
-
-	pinctrl_wdog1: wdog1rp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__WDOG1_B	0x1b0b0
-		>;
-	};
-};
-
-&mipi_csi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mipi_csi>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>;
-	reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
-};
-
-/* LCD_BKLT_PWM */
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-};
-
-&reg_arm {
-	vin-supply = <&reg_v_core_s0>;
-};
-
-&reg_pu {
-	vin-supply = <&reg_vddsoc_s0>;
-};
-
-&reg_soc {
-	vin-supply = <&reg_vddsoc_s0>;
-};
-
-/* SER0 */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-};
-
-/* SER1 */
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-};
-
-/* SER2 */
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-};
-
-/* SER3 */
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-};
-
-/* USB0 */
-&usbotg {
-	/*
-	 * no 'imx6-usb-charger-detection'
-	 * since USB_OTG_CHD_B pin is not wired
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-};
-
-/* USB1/2 via hub */
-&usbh1 {
-	vbus-supply = <&reg_5p0v_s0>;
-};
-
-/* SDIO */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-	no-1-8-v;
-};
-
-/* SDMMC */
-&usdhc4 {
-	/* Internal eMMC, optional on some boards */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	no-sdio;
-	no-sd;
-	non-removable;
-	vmmc-supply = <&reg_3p3v_s0>;
-	vqmmc-supply = <&reg_1p8v_s0>;
-};
-
-&wdog1 {
-	/* CPLD is feeded by watchdog (hardwired) */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
deleted file mode 100644
index 7b7e6c2ad190c..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-mba6.dtsi
+++ /dev/null
@@ -1,536 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * Copyright 2013-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	aliases {
-		mmc0 = &usdhc3;
-		mmc1 = &usdhc2;
-		/delete-property/ mmc2;
-		/delete-property/ mmc3;
-		rtc0 = &rtc0;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	beeper: gpio-beeper {
-		compatible = "gpio-beeper";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiobeeper>;
-		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio_buttons: gpio-buttons {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiobuttons>;
-
-		button1 {
-			label = "s6";
-			linux,code = <KEY_F6>;
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-
-		button2 {
-			label = "s7";
-			linux,code = <KEY_F7>;
-			gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-
-		button3 {
-			label = "s8";
-			linux,code = <KEY_F8>;
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioled>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_mba6_3p3v: regulator-mba6-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "supply-mba6-3p3v";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_pcie: regulator-pcie {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regpcie>;
-		regulator-name = "supply-pcie";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		/* PCIE.PWR_EN */
-		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		vin-supply = <&reg_mba6_3p3v>;
-	};
-
-	reg_vcc3v3_audio: regulator-vcc3v3-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3-audio";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&reg_mba6_3p3v>;
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-tlv320aic32x4";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_audmux>;
-		model = "imx-audio-tlv320aic32x4";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&tlv320aic32x4>;
-		audio-asrc = <&asrc>;
-		audio-routing =
-			"IN3_L", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"IN1_L", "Line In Jack",
-			"IN1_R", "Line In Jack",
-			"Line Out Jack", "LOL",
-			"Line Out Jack", "LOR";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	ssi0 {
-		fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-				IMX_AUDMUX_V2_PTCR_TFSDIR |
-				IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT3_SSI_PINS_3) |
-				IMX_AUDMUX_V2_PTCR_TCLKDIR |
-				IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT3_SSI_PINS_3))
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT3_SSI_PINS_3)
-		>;
-	};
-
-	aud3 {
-		fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0)
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_mba6>;
-	cs-gpios = <&gpio3 19 0>, <&gpio3 24 0>;
-};
-
-&fec {
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy>;
-	mac-address = [00 00 00 00 00 00];
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@3 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <3>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <1000>;
-			reset-deassert-us = <100000>;
-			micrel,force-master;
-			max-speed = <1000>;
-		};
-	};
-};
-
-&i2c1 {
-	tlv320aic32x4: audio-codec@18 {
-		compatible = "ti,tlv320aic32x4";
-		reg = <0x18>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "mclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec>;
-		ldoin-supply = <&reg_vcc3v3_audio>;
-		iov-supply = <&reg_mba6_3p3v>;
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	linux,rs485-enabled-at-boot-time;
-	rs485-rts-active-low;
-	rs485-rx-during-tx;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	power-active-high;
-	over-current-active-low;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-/* SD card slot */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_mba6_3p3v>;
-	bus-width = <4>;
-	no-1-8-v;
-	no-mmc;
-	no-sdio;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-	/* does not work on unmodified starter kit */
-	/* fsl,ext-reset-output; */
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
-		>;
-	};
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0xb099
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0xb099
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0xb099
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0xb099
-		>;
-	};
-
-	pinctrl_codec: codecgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0xb0 /* CLK */
-		>;
-	};
-
-	pinctrl_ecspi1_mba6: ecspimba6grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0xb099 /* eCSPI1 SS2 */
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			/* FEC phy IRQ */
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x00011008
-			/* FEC phy reset */
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25   0x1b099
-			/* DSE = 100, 100k up, SPEED = MED */
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0xb0a0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC         0xb0a0
-			/* DSE = 111, pull 100k up */
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0xb038
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0xb038
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0xb038
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0xb038
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0xb038
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
-			/* DSE = 111, pull external */
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x0038
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x0038
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x0038
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x0038
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x0038
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
-			/* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0f0
-		>;
-	};
-
-	pinctrl_gpiobeeper: gpiobeepergrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0xb099
-		>;
-	};
-
-	pinctrl_gpiobuttons: gpiobuttongrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b099
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b099
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b099
-		>;
-	};
-
-	pinctrl_gpioled: gpioledgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0xb099 /* LED V15 */
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb099 /* LED V16 */
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
-
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
-
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
-			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
-			MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
-			MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
-
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
-			MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
-			MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
-			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
-			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
-
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
-			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
-			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
-
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
-
-			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			/* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
-			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
-			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
-			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
-			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
-		>;
-	};
-
-	pinctrl_regpcie: regpciegrp {
-		fsl,pins = <
-			/* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
-			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D30__UART3_CTS_B   0x1b0b1
-			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			/* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
-			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00017071
-			/* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
-			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
-
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x0001b099 /* usdhc2 CD */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02  0x0001b099 /* usdhc2 WP */
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC  0x0001b0b0
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID   0x00017059
-			MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0001b099
-		>;
-	};
-
-	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			 /* Watchdog out */
-			MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x0000b099
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
deleted file mode 100644
index df8fa169e9f6d..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * Copyright 2013-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
-};
-
-&i2c1 {
-	lm75: temperature-sensor@49 {
-		compatible = "national,lm75";
-		reg = <0x49>;
-	};
-
-	m24c64_57: eeprom@57 {
-		compatible = "atmel,24c64";
-		reg = <0x57>;
-		pagesize = <32>;
-	};
-
-	rtc0: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
deleted file mode 100644
index 7d1cd7454c7f5..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * Copyright 2013-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_recovery>;
-	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c3 {
-	lm75: temperature-sensor@49 {
-		compatible = "national,lm75";
-		reg = <0x49>;
-	};
-
-	m24c64_57: eeprom@57 {
-		compatible = "atmel,24c64";
-		reg = <0x57>;
-		pagesize = <32>;
-	};
-
-	rtc0: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
deleted file mode 100644
index 6d4eab1942b94..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ /dev/null
@@ -1,583 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2015 Boundary Devices, Inc.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_wlan_vmmc: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_wlan_vmmc>;
-			regulator-name = "reg_wlan_vmmc";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		home {
-			label = "Home";
-			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
-			linux,code = <102>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
-			linux,code = <158>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-j14-pin1 {
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		led-j14-pin3 {
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		led-j14-pins8-9 {
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		led-j46-pin2 {
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		led-j46-pin3 {
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-	};
-
-	backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds0: backlight-lvds0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds0>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6dl-nit6xlite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "microchip,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	/delete-property/ interrupts;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txen-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-	};
-
-	rtc@6f {
-		compatible = "isil,isl1208";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
-		reg = <0x6f>;
-		interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_j10>;
-	pinctrl-1 = <&pinctrl_j28>;
-
-	imx6dl-nit6xlite {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Home Button: J14 pin 5 */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Back Button: J14 pin 7 */
-				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
-				/* Touch IRQ: J7 pin 4 */
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-				/* tcs2004 IRQ */
-				MX6QDL_PAD_EIM_LBA__GPIO2_IO27	0x1b0b0
-				/* tsc2004 reset */
-				MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x0b0b0
-			>;
-		};
-
-		pinctrl_j10: j10grp {
-			fsl,pins = <
-				/* Broadcom WiFi module pins */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0b0b0
-				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
-				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-			>;
-		};
-
-		pinctrl_j28: j28grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
-			>;
-		};
-
-		pinctrl_leds: ledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
-				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x0b0b0
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x030b0
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x0b0b0
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_wlan_vmmc: wlan-vmmcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
-			>;
-		};
-
-		pinctrl_rtc: rtcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b0
-			>;
-		};
-
-		pinctrl_sgtl5000: sgtl5000grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_wlan_vmmc>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
deleted file mode 100644
index 81a9a302aec1b..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ /dev/null
@@ -1,849 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2015 Boundary Devices, Inc.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0xF0000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p8v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		reg_2p5v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_h1_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_wlan_vmmc: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_wlan_vmmc>;
-			regulator-name = "reg_wlan_vmmc";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-
-		reg_can_xcvr: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	i2c2mux {
-		compatible = "i2c-mux-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
-			     &gpio4 15 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c2>;
-		idle-state = <0>;
-
-		i2c2mux@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2mux@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	i2c3mux {
-		compatible = "i2c-mux-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c3>;
-		idle-state = <0>;
-
-		i2c3mux@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-speaker-enable {
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		led-ttymxc4-rs232 {
-			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
-			retain-state-suspended;
-			default-state = "on";
-		};
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds0: backlight-lvds0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds1: backlight-lvds1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds0>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	panel-lvds1 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds1>;
-
-		port {
-			panel_in_lvds1: endpoint {
-				remote-endpoint = <&lvds1_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-nitrogen6_max-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "microchip,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	/delete-property/ interrupts;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txen-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	rtc: rtc@68 {
-		compatible = "microcrystal,rv4162";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rv4162>;
-		reg = <0x68>;
-		interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	imx6q-nitrogen6-max {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <
-				/* Flexcan XCVR enable */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Power Button */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				/* Menu Button */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				/* Home Button */
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				/* Back Button */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* Volume Up Button */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Volume Down Button */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2mux: i2c2muxgrp {
-			fsl,pins = <
-				/* ov5642 camera i2c enable */
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x000b0
-				/* ov5640_mipi camera i2c enable */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15	0x000b0
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c3mux: i2c3muxgrp {
-			fsl,pins = <
-				/* PCIe I2C enable */
-				MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
-			>;
-		};
-
-		pinctrl_j15: j15grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				/* PCIe reset */
-				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x000b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__PWM2_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_rv4162: rv4162grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
-			>;
-		};
-
-		pinctrl_sgtl5000: sgtl5000grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x130b1
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x030b1
-				/* RS485 RX Enable: pull up */
-				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b1
-				/* RS485 DEN: pull down */
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b1
-				/* RS485/!RS232 Select: pull down (rs232) */
-				MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x030b1
-				/* ON: pull down */
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x030b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x100b0
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_wlan_vmmc: wlan-vmmcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
-				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-
-	lvds-channel@1 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds1_out: endpoint {
-				remote-endpoint = <&panel_in_lvds1>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_wlan_vmmc>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&reg_1p8v>;
-	keep-power-in-suspend;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
deleted file mode 100644
index 000e9dc97b1ac..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ /dev/null
@@ -1,736 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2016 Boundary Devices, Inc.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds0: backlight-lvds0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds1: backlight-lvds1 {
-		compatible = "gpio-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight_lvds1>;
-		gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		default-on;
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds0>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	panel-lvds1 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds1>;
-
-		port {
-			panel_in_lvds1: endpoint {
-				remote-endpoint = <&lvds1_out>;
-			};
-		};
-	};
-
-	reg_1p8v: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	reg_2p5v: regulator-2v5 {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_can_xcvr: regulator-can-xcvr {
-		compatible = "regulator-fixed";
-		regulator-name = "CAN XCVR";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can_xcvr>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1>;
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_wlan_vmmc: regulator-wlan-vmmc {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wlan_vmmc>;
-		regulator-name = "reg_wlan_vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-nitrogen6_som2-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "microchip,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	/delete-property/ interrupts;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	rtc@68 {
-		compatible = "microcrystal,rv4162";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rv4162>;
-		reg = <0x68>;
-		interrupts-extended = <&gpio6 7 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-		>;
-	};
-
-	pinctrl_backlight_lvds1: backlight-lvds1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x0b0b0
-		>;
-	};
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_can_xcvr: can-xcvrgrp {
-		fsl,pins = <
-			/* Flexcan XCVR enable */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x130b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0
-			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x030b0
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
-			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-		>;
-	};
-
-	pinctrl_gpio_keys: gpio-keysgrp {
-		fsl,pins = <
-			/* Power Button */
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-			/* Menu Button */
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-			/* Home Button */
-			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-			/* Back Button */
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-			/* Volume Up Button */
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-			/* Volume Down Button */
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
-			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c3mux: i2c3muxgrp {
-		fsl,pins = <
-			/* PCIe I2C enable */
-			MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
-		>;
-	};
-
-	pinctrl_j15: j15grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			/* PCIe reset */
-			MX6QDL_PAD_EIM_DA0__GPIO3_IO00	0x030b0
-			MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x030b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x030b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x030b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x030b1
-		>;
-	};
-
-	pinctrl_rv4162: rv4162grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
-		>;
-	};
-
-	pinctrl_sgtl5000: sgtl5000grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
-			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x130b0
-			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x130b0
-			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbh1: usbh1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-			/* power enable, high active */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x030b0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17071
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17071
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17071
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17071
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17071
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-		>;
-	};
-
-	pinctrl_wlan_vmmc: wlan-vmmcgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x100b0
-			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x030b0
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x030b0
-			MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-		>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-
-	lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds1_out: endpoint {
-				remote-endpoint = <&panel_in_lvds1>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio3 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_wlan_vmmc>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&reg_1p8v>;
-	keep-power-in-suspend;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
deleted file mode 100644
index 731759bdd7f57..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ /dev/null
@@ -1,693 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2013 Boundary Devices, Inc.
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-
-		reg_can_xcvr: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		reg_wlan_vmmc: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_wlan_vmmc>;
-			regulator-name = "reg_wlan_vmmc";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-
-		reg_usb_h1_vbus: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-nitrogen6x-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0xc0000>;
-		};
-
-		partition@c0000 {
-			label = "env";
-			reg = <0xc0000 0x2000>;
-		};
-
-		partition@c2000 {
-			label = "splash";
-			reg = <0xc2000 0x13e000>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	/delete-property/ interrupts;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txen-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	rtc: rtc@6f {
-		compatible = "isil,isl1208";
-		reg = <0x6f>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-nitrogen6x {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SGTL5000 sys_mclk */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <
-				/* Flexcan XCVR enable */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Power Button */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				/* Menu Button */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				/* Home Button */
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				/* Back Button */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* Volume Up Button */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Volume Down Button */
-				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_j15: j15grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
-			>;
-		};
-
-		pinctrl_wlan_vmmc: wlan-vmmcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
-				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_wlan_vmmc>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
deleted file mode 100644
index 0020dbb1722c3..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
+++ /dev/null
@@ -1,119 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 PHYTEC Messtechnik
- * Author: Christian Hemp <c.hemp@phytec.de>
- */
-
-/ {
-	display: display0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0>;
-		interface-pix-fmt = "rgb24";
-		status = "disabled";
-
-		port@0 {
-			reg = <0>;
-
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			display0_out: endpoint {
-				remote-endpoint = <&peb_panel_lcd_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "edt,etm0700g0edh6";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_pwr>;
-		power-supply = <&reg_display>;
-		enable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		backlight = <&backlight>;
-		status = "disabled";
-
-		port {
-			peb_panel_lcd_in: endpoint {
-				remote-endpoint = <&display0_out>;
-			};
-		};
-	};
-
-	reg_display: regulator-peb-display {
-		compatible = "regulator-fixed";
-		regulator-name = "peb-display";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&i2c1 {
-	edt_ft5x06: touchscreen@38 {
-		compatible = "edt,edt-ft5406";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_edt_ft5x06>;
-		reg = <0x38>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
-		status = "disabled";
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&iomuxc {
-	pinctrl_disp0: disp0grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x1b080
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
-		>;
-	};
-
-	pinctrl_disp0_pwr: disp0pwrgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
-		>;
-	};
-
-	pinctrl_edt_ft5x06: edtft5x06grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA2__GPIO3_IO02			0xb0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi
deleted file mode 100644
index 037b60197598b..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 PHYTEC Messtechnik
- * Author: Christian Hemp <c.hemp@phytec.de>
- */
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-		status = "disabled";
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
-
-		sleep {
-			label = "Sleep Button";
-			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_SLEEP>;
-		};
-	};
-
-	user_leds: user-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_user_leds>;
-		status = "disabled";
-
-		user-led1 {
-			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "on";
-		};
-
-		user-led2 {
-			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "on";
-		};
-
-		user-led3 {
-			gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "on";
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl_gpio_keys: gpiokeysgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b0
-		>;
-	};
-
-	pinctrl_user_leds: userledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
deleted file mode 100644
index 84f884d6e55bc..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2021 PHYTEC Messtechnik GmbH
- * Author: Yunus Bas <y.bas@phytec.de>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	reg_wl_en: regulator-wl-en {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan_en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wl>;
-		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <100>;
-		status = "disabled";
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_bt>;
-	uart-has-rtscts;
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-	};
-};
-
-&usdhc3 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_wl>;
-	vmmc-supply = <&reg_wl_en>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	status = "disabled";
-
-	brmcf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-	};
-};
-
-&iomuxc {
-	pinctrl_uart3_bt: uart3grp-bt {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0xb0b1	/* BT ENABLE */
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0xb0b1	/* DEV WAKEUP */
-			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0xb0b1  /* HOST WAKEUP */
-		>;
-	};
-
-	pinctrl_usdhc3_wl: usdhc3grp-wl {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-		>;
-	};
-
-	pinctrl_wl: wlgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02      0xb0b1	/* WLAN ENABLE */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
deleted file mode 100644
index 1a599c294ab86..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
+++ /dev/null
@@ -1,412 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 PHYTEC Messtechnik GmbH
- * Author: Christian Hemp <c.hemp@phytec.de>
- */
-
-
-/ {
-	aliases {
-		rtc0 = &i2c_rtc;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_backlight>;
-		pwms = <&pwm1 0 5000000>;
-		status = "okay";
-	};
-
-	gpio_leds: leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioleds>;
-		status = "disabled";
-
-		led-red {
-			label = "phyboard-mira:red";
-			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-green {
-			label = "phyboard-mira:green";
-			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-blue {
-			label = "phyboard-mira:blue";
-			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	reg_backlight: regulator-backlight {
-		compatible = "regulator-fixed";
-		regulator-name = "backlight_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_en_switch: regulator-en-switch {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_en_switch>;
-		regulator-name = "Enable Switch";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-		regulator-always-on;
-	};
-
-	reg_flexcan1: regulator-flexcan1 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flexcan1_en>;
-		regulator-name = "flexcan1-reg";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_panel: regulator-panel {
-		compatible = "regulator-fixed";
-		regulator-name = "panel-power-supply";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-	};
-
-	reg_pcie: regulator-pcie {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_reg>;
-		regulator-name = "mPCIe_1V5";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_h1_vbus: usb-h1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1_vbus>;
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usbotg_vbus: usbotg-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg_vbus>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	panel {
-		compatible = "auo,g104sn02";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_panel_en>;
-		power-supply = <&reg_panel>;
-		enable-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-		backlight = <&backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_flexcan1>;
-	status = "disabled";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmicec>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	clock-frequency = <400000>;
-	status = "disabled";
-
-	stmpe: touchctrl@44 {
-		compatible = "st,stmpe811";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_stmpe>;
-		reg = <0x44>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 IRQ_TYPE_NONE>;
-		status = "disabled";
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			st,sample-time = <4>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,adc-freq = <1>;
-			st,ave-ctrl = <1>;
-			st,touch-det-delay = <2>;
-			st,settling = <2>;
-			st,fraction-z = <7>;
-			st,i-drive = <1>;
-		};
-	};
-
-	i2c_rtc: rtc@68 {
-		compatible = "microcrystal,rv4162";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc_int>;
-		reg = <0x68>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	clock-frequency = <100000>;
-	status = "disabled";
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-		status = "disabled";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie>;
-	status = "disabled";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	disable-over-current;
-	status = "disabled";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	vbus-supply = <&reg_usbotg_vbus>;
-	disable-over-current;
-	status = "disabled";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	disable-wp;
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_panel_en: panelen1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
-		>;
-	};
-
-	pinctrl_en_switch: enswitchgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0xb0b1
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan1_en: flexcan1engrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0xb0b1
-		>;
-	};
-
-	pinctrl_gpioleds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24	0x1b0b0
-		>;
-	};
-
-	pinctrl_hdmicec: hdmicecgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0xb0b1
-		>;
-	};
-
-	pinctrl_pcie_reg: pciereggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0xb0b1
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_rtc_int: rtcintgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b0
-		>;
-	};
-
-	pinctrl_stmpe: stmpegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB3__UART3_CTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbh1_vbus: usbh1vbusgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0xb0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-		>;
-	};
-
-	pinctrl_usbotg_vbus: usbotgvbusgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0xb0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1  /* CD */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
deleted file mode 100644
index 51d28e275aa64..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- */
-
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	regulators {
-		sound_1v8: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "i2s-audio-1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		sound_3v3: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "i2s-audio-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-	};
-
-	tlv320_mclk: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <19200000>;
-		clock-output-names = "tlv320-mclk";
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "OnboardTLV320AIC3007";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Line", "Line In",
-			"Line", "Line Out",
-			"Speaker", "Speaker",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Line Out", "LLOUT",
-			"Line Out", "RLOUT",
-			"Speaker", "SPOP",
-			"Speaker", "SPOM",
-			"Headphone Jack", "HPLOUT",
-			"Headphone Jack", "HPROUT",
-			"MIC3L", "Mic Jack",
-			"MIC3R", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE1L", "Line In",
-			"LINE1R", "Line In";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi2>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&codec>;
-			clocks = <&tlv320_mclk>;
-		};
-	};
-
-};
-
-&audmux {
-	status = "okay";
-
-	ssi2 {
-		fsl,audmux-port = <1>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			IMX_AUDMUX_V2_PTCR_TFSDIR |
-			IMX_AUDMUX_V2_PTCR_TFSEL(4) |
-			IMX_AUDMUX_V2_PTCR_TCLKDIR |
-			IMX_AUDMUX_V2_PTCR_TCSEL(4))
-			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
-		>;
-	};
-
-	pins5 {
-		fsl,audmux-port = <4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
-		>;
-	};
-};
-
-&can1 {
-	status = "okay";
-};
-
-&fec {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	codec: tlv320@18 {
-		compatible = "ti,tlv320aic3007";
-		#sound-dai-cells = <0>;
-		reg = <0x18>;
-		ai3x-micbias-vg = <2>;
-
-		AVDD-supply = <&sound_3v3>;
-		IOVDD-supply = <&sound_3v3>;
-		DRVDD-supply = <&sound_3v3>;
-		DVDD-supply = <&sound_1v8>;
-	};
-
-	stmpe@41 {
-		compatible = "st,stmpe811";
-		reg = <0x41>;
-	};
-
-	rtc@51 {
-		compatible = "epson,rtc8564";
-		reg = <0x51>;
-	};
-
-	adc@64 {
-		compatible = "maxim,max1037";
-		reg = <0x64>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-	dr_mode = "peripheral";
-};
-
-&usdhc2 {
-	status = "okay";
-};
-
-&usdhc3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
deleted file mode 100644
index 80adb2a02cc94..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ /dev/null
@@ -1,466 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Phytec phyFLEX-i.MX6 Quad";
-	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb_otg_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio4 15 0>;
-			enable-active-high;
-		};
-
-		reg_usb_h1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1_vbus>;
-			reg = <1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 0 0>;
-			enable-active-high;
-		};
-	};
-
-	gpio_leds: leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-		compatible = "gpio-leds";
-
-		led_green: led-green {
-			label = "phyflex:green";
-			gpios = <&gpio1 30 0>;
-		};
-
-		led_red: led-red {
-			label = "phyflex:red";
-			gpios = <&gpio2 31 0>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "disabled";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-
-	som_flash: flash@0 {
-		compatible = "m25p80", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-handle = <&ethphy>;
-	phy-mode = "rgmii";
-	phy-reset-duration = <10>; /* in msecs */
-	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	phy-supply = <&vdd_eth_io_reg>;
-	status = "disabled";
-
-	fec_mdio: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			txc-skew-ps = <1680>;
-			rxc-skew-ps = <1860>;
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	som_eeprom: eeprom@50 {
-		compatible = "catalyst,24c32", "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x50>;
-	};
-
-	pmic@58 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
-		interrupt-controller;
-
-		regulators {
-			vddcore_reg: bcore1 {
-				regulator-min-microvolt = <730000>;
-				regulator-max-microvolt = <1380000>;
-				regulator-always-on;
-			};
-
-			vddsoc_reg: bcore2 {
-				regulator-min-microvolt = <730000>;
-				regulator-max-microvolt = <1380000>;
-				regulator-always-on;
-			};
-
-			vdd_ddr3_reg: bpro {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_reg: bperi {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_buckmem_reg: bmem {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_eth_reg: bio {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vdd_eth_io_reg: ldo4 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vdd_mx6_snvs_reg: ldo5 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_pmic_io_reg: ldo6 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_sd0_reg: ldo9 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_sd1_reg: ldo10 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_mx6_high_reg: ldo11 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-		};
-
-		da9063_rtc: rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		da9063_wdog: watchdog {
-			compatible = "dlg,da9063-watchdog";
-		};
-
-		onkey {
-			compatible = "dlg,da9063-onkey";
-			status = "disabled";
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-};
-
-&iomuxc {
-	imx6q-phytec-pfla02 {
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x80000000 /* CS0 */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x80000000 /* Reset GPIO */
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_leds: ledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000 /* Green LED */
-				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x80000000 /* Red LED */
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09	0x80000000>; /* PMIC interrupt */
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1_vbus: usbh1vbusgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_cdwp: usdhc3cdwp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT16__AUD5_TXC	0x130b0
-				MX6QDL_PAD_DISP0_DAT17__AUD5_TXD	0x110b0
-				MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS	0x130b0
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&reg_arm {
-	vin-supply = <&vddcore_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&vddsoc_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&vddsoc_reg>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "disabled";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "disabled";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "disabled";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&vdd_sd1_reg>;
-	status = "disabled";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3
-		     &pinctrl_usdhc3_cdwp>;
-	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&vdd_sd0_reg>;
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
deleted file mode 100644
index 28a805384668f..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ /dev/null
@@ -1,311 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 PHYTEC Messtechnik GmbH
- * Author: Christian Hemp <c.hemp@phytec.de>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/regulator/dlg,da9063-regulator.h>
-
-/ {
-	aliases {
-		rtc1 = &da9062_rtc;
-		rtc2 = &snvs_rtc;
-	};
-
-	/*
-	 * Set the minimum memory size here and
-	 * let the bootloader set the real size.
-	 */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x8000000>;
-	};
-
-	gpio_leds_som: somleds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioleds_som>;
-
-		som-led-green {
-			label = "phycore:green";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	m25p80: flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		status = "disabled";
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-handle = <&ethphy>;
-	phy-mode = "rgmii";
-	phy-supply = <&vdd_eth_io>;
-	phy-reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@3 {
-			reg = <3>;
-			txc-skew-ps = <1680>;
-			rxc-skew-ps = <1860>;
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "disabled";
-};
-
-&i2c3 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "st,24c32", "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x50>;
-	};
-
-	pmic: pmic@58 {
-		compatible = "dlg,da9062";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		reg = <0x58>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		da9062_rtc: rtc {
-			compatible = "dlg,da9062-rtc";
-		};
-
-		da9062_onkey: onkey {
-			compatible = "dlg,da9062-onkey";
-		};
-
-		watchdog {
-			compatible = "dlg,da9062-watchdog";
-			dlg,use-sw-pm;
-		};
-
-		thermal {
-			compatible = "dlg,da9062-thermal";
-			status = "disabled";
-		};
-
-		gpio {
-			compatible = "dlg,da9062-gpio";
-			status = "disabled";
-		};
-
-		regulators {
-			vdd_arm: buck1 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <925000>;
-				regulator-max-microvolt = <1380000>;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
-				regulator-always-on;
-			};
-
-			vdd_soc: buck2 {
-				regulator-name = "vdd_soc";
-				regulator-min-microvolt = <1150000>;
-				regulator-max-microvolt = <1380000>;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
-				regulator-always-on;
-			};
-
-			vdd_ddr3_1p5: buck3 {
-				regulator-name = "vdd_ddr3";
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
-				regulator-always-on;
-			};
-
-			vdd_eth_1p2: buck4 {
-				regulator-name = "vdd_eth";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
-				regulator-always-on;
-			};
-
-			vdd_snvs: ldo1 {
-				regulator-name = "vdd_snvs";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vdd_high: ldo2 {
-				regulator-name = "vdd_high";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vdd_eth_io: ldo3 {
-				regulator-name = "vdd_eth_io";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-			};
-
-			vdd_emmc_1p8: ldo4 {
-				regulator-name = "vdd_emmc";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-		};
-	};
-};
-
-&reg_arm {
-	vin-supply = <&vdd_arm>;
-};
-
-&reg_pu {
-	vin-supply = <&vdd_soc>;
-};
-
-&reg_soc {
-	vin-supply = <&vdd_soc>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpioleds_som: gpioledssomgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-			MX6QDL_PAD_NANDF_CS2__NAND_CE2_B	0xb0b1
-			MX6QDL_PAD_NANDF_CS3__NAND_CE3_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x4001b8b1
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x4001b8b1
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi b/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi
deleted file mode 100644
index 3a968782e854b..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2017 NXP
-
-#include "imx6qdl-pico.dtsi"
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led {
-			label = "gpio-led";
-			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-};
-
-&i2c1 {
-	mpl3115@60 {
-		compatible = "fsl,mpl3115";
-		reg = <0x60>;
-	};
-};
-
-&i2c2 {
-	io-expander@25 {
-		compatible = "nxp,pca9554";
-		reg = <0x25>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-	};
-
-};
-
-&iomuxc {
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi b/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi
deleted file mode 100644
index 144c4727fbc78..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2017 NXP
-
-#include "imx6qdl-pico.dtsi"
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led {
-			label = "gpio-led";
-			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-};
-
-&i2c2 {
-	status = "okay";
-
-	adc081c: adc@50 {
-		compatible = "ti,adc081c";
-		reg = <0x50>;
-		vref-supply = <&reg_3p3v>;
-	};
-};
-
-&iomuxc {
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi b/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi
deleted file mode 100644
index 3d56a42164482..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-
-#include "imx6qdl-pico.dtsi"
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led {
-			label = "gpio-led";
-			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-};
-
-&i2c1 {
-	adc@52 {
-		compatible = "ti,adc081c";
-		reg = <0x52>;
-		vref-supply = <&reg_2p5v>;
-	};
-};
-
-&i2c2 {
-	io-expander@25 {
-		compatible = "nxp,pca9554";
-		reg = <0x25>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-	};
-};
-
-&i2c3 {
-	rtc@68 {
-		compatible = "dallas,ds1337";
-		reg = <0x68>;
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi b/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi
deleted file mode 100644
index b823dce62e63f..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2017 NXP
-
-#include "imx6qdl-pico.dtsi"
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led {
-			label = "gpio-led";
-			gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-};
-
-&hdmi {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/imx6qdl-pico.dtsi
deleted file mode 100644
index c39a9ebdaba1c..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-pico.dtsi
+++ /dev/null
@@ -1,627 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2018 Technexion Ltd.
-//
-// Author: Wig Cheng <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	reg_1p5v: regulator-1p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P5V";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-	};
-
-	reg_2p8v: regulator-2p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg_vbus>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	};
-
-	codec_osc: clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6-pico-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 50000 0>;
-		brightness-levels = <0 36 72 108 144 180 216 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_lcd>;
-		regulator-name = "lcd-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel {
-		compatible = "vxt,vl050-8048nt-c01";
-		backlight = <&backlight>;
-		power-supply = <&reg_lcd_3v3>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
-	phy-handle = <&phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy: ethernet-phy@1 {
-			reg = <1>;
-			qca,clk-out-frequency = <125000000>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	sgtl5000: audio-codec@a {
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		compatible = "fsl,sgtl5000";
-		clocks = <&codec_osc>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_1p8v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		wakeup-source;
-	};
-
-	camera@3c {
-		compatible = "ovti,ov5645";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5645>;
-		reg = <0x3c>;
-		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-frequency = <24000000>;
-		vdddo-supply = <&reg_1p8v>;
-		vdda-supply = <&reg_2p8v>;
-		vddd-supply = <&reg_1p5v>;
-		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-
-		port {
-			ov5645_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5645_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie_reset>;
-	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {  /* Bluetooth module */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <8>;
-	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc2 {  /* Wifi/BT  */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	non-removable;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x4001b0b5 /* PICO_P24 */
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x4001b0b5 /* PICO_P26 */
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x4001b0b5 /* PICO_P28 */
-			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x4001b0b5 /* PICO_P30 */
-			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x4001b0b5 /* PICO_P32 */
-			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x4001b0b5 /* PICO_P34 */
-			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x4001b0b5 /* PICO_P42 */
-			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x4001b0b5 /* PICO_P44 */
-			MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x4001b0b5 /* PICO_P48 */
-		>;
-	};
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000f0b0
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x1b0b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x1b0b1
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x1b0b1
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000f0b0
-			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x000f0b0
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1f0b1
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1: ipu1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
-			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04		0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
-		>;
-	};
-
-	pinctrl_ov5645: ov5645grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x0b0b0
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
-			MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
-		>;
-	};
-
-	pinctrl_pcie_reset: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x130b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_reg_lcd: reglcdgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-		>;
-	};
-
-	pinctrl_usbotg_vbus: usbotgvbusgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17071
-			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x17071
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17071
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17071
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17071
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17071
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
deleted file mode 100644
index f0db0d4471f40..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2014 Protonic Holland
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_usb_h1_vbus: regulator-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "h1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_otg_vbus: regulator-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "otg-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	temperature-sensor@70 {
-		compatible = "ti,tmp103";
-		reg = <0x70>;
-	};
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	no-sd;
-	no-sdio;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b008
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b008
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17099
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10099
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17099
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17099
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17099
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17099
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17099
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17099
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17099
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17099
-			MX6QDL_PAD_SD3_RST__SD3_RESET		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC	0x1b0b0
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
deleted file mode 100644
index f804ff95a6ad6..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2014 FEDEVEL, Inc.
- *
- * Author: Robert Nelson <robertcnelson@gmail.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usbh1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-names = "default";
-			regulator-name = "usbh1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-names = "default";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led0: led-usr {
-			label = "usr";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6-rex-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6-rex-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pca9535: gpio-expander@27 {
-		compatible = "nxp,pca9535";
-		reg = <0x27>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pca9535>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	eeprom@57 {
-		compatible = "atmel,24c02";
-		reg = <0x57>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-rex {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SGTL5000 sys_mclk */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x030b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				/* CS */
-				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x000b1
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
-				/* CS */
-				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-				/* Phy reset */
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				/* user led */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000
-			>;
-		};
-
-		pinctrl_pca9535: pca9535grp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x17059
-		   >;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x10b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x10b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				/* CD */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* WP */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1f0b0
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				/* CD */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-				/* WP */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1f0b0
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
deleted file mode 100644
index f79caa36f3d25..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ /dev/null
@@ -1,864 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led-user {
-			label = "debug";
-			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		home {
-			label = "Home";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			wakeup-source;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			wakeup-source;
-		};
-
-		program {
-			label = "Program";
-			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROGRAM>;
-			wakeup-source;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	clocks {
-		codec_osc: anaclk2 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24576000>;
-		};
-	};
-
-	reg_audio: regulator-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "cs42888_supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_can_en: regulator-can-en {
-		compatible = "regulator-fixed";
-		regulator-name = "can-en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_can_stby: regulator-can-stby {
-		compatible = "regulator-fixed";
-		regulator-name = "can-stby";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_can_en>;
-	};
-
-	sound-cs42888 {
-		compatible = "fsl,imx6-sabreauto-cs42888",
-			"fsl,imx-audio-cs42888";
-		model = "imx-cs42888";
-		audio-cpu = <&esai>;
-		audio-asrc = <&asrc>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Line Out Jack", "AOUT1L",
-			"Line Out Jack", "AOUT1R",
-			"Line Out Jack", "AOUT2L",
-			"Line Out Jack", "AOUT2R",
-			"Line Out Jack", "AOUT3L",
-			"Line Out Jack", "AOUT3R",
-			"Line Out Jack", "AOUT4L",
-			"Line Out Jack", "AOUT4R",
-			"AIN1L", "Line In Jack",
-			"AIN1R", "Line In Jack",
-			"AIN2L", "Line In Jack",
-			"AIN2R", "Line In Jack";
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif",
-			   "fsl,imx-sabreauto-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		status = "okay";
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3mux>;
-		mux-gpios = <&gpio5 4 0>;
-		i2c-parent = <&i2c3>;
-		idle-state = <0>;
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			adv7180: camera@21 {
-				compatible = "adi,adv7180";
-				reg = <0x21>;
-				powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>;
-				interrupt-parent = <&gpio1>;
-				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-
-				port {
-					adv7180_to_ipu1_csi0_mux: endpoint {
-						remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-						bus-width = <8>;
-					};
-				};
-			};
-
-			max7310_a: gpio@30 {
-				compatible = "maxim,max7310";
-				reg = <0x30>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			max7310_b: gpio@32 {
-				compatible = "maxim,max7310";
-				reg = <0x32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_max7310>;
-				reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			};
-
-			max7310_c: gpio@34 {
-				compatible = "maxim,max7310";
-				reg = <0x34>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			light-sensor@44 {
-				compatible = "isil,isl29023";
-				reg = <0x44>;
-				interrupt-parent = <&gpio5>;
-				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
-			};
-
-			magnetometer@e {
-				compatible = "fsl,mag3110";
-				reg = <0x0e>;
-				interrupt-parent = <&gpio2>;
-				interrupts = <29 IRQ_TYPE_EDGE_RISING>;
-			};
-
-			accelerometer@1c {
-				compatible = "fsl,mma8451";
-				reg = <0x1c>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mma8451_int>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
-	bus-width = <8>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
-			  <&clks IMX6QDL_PLL4_BYPASS>,
-			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
-				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
-	status = "disabled"; /* pin conflict with WEIM NOR */
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&esai {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esai>;
-	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
-			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <0>, <24576000>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	/delete-property/ interrupts;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "disabled"; /* pin conflict with fec */
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_cec>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	codec: cs42888@48 {
-		compatible = "cirrus,cs42888";
-		reg = <0x48>;
-		clocks = <&codec_osc>;
-		clock-names = "mclk";
-		VA-supply = <&reg_audio>;
-		VD-supply = <&reg_audio>;
-		VLS-supply = <&reg_audio>;
-		VLC-supply = <&reg_audio>;
-	};
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_egalax_int>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
-		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-sabreauto {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
-				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
-				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			>;
-		};
-
-		pinctrl_ecspi1_cs: ecspi1cs {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
-			>;
-		};
-
-		pinctrl_egalax_int: egalax-intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_esai: esaigrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
-				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
-				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
-				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
-				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
-				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
-				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
-				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
-				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
-				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x17059
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x17059
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x17059
-				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x17059
-			>;
-		};
-
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
-				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
-				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12		0x1b0b0
-				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b0
-				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
-
-		pinctrl_hdmi_cec: hdmicecgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3mux: i2c3muxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1
-			>;
-		};
-
-		pinctrl_ipu1_csi0: ipu1csi0grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x1b0b0
-				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
-				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x1b0b0
-				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x1b0b0
-			>;
-		};
-
-		pinctrl_max7310: max7310grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
-			>;
-		};
-
-		pinctrl_mma8451_int: mma8451intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_gpt_input_capture0: gptinputcapture0grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpt_input_capture1: gptinputcapture1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2	0x1b0b0
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
-			>;
-		};
-
-		pinctrl_weim_cs0: weimcs0grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
-			>;
-		};
-
-		pinctrl_weim_nor: weimnorgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
-				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
-				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
-				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
-				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
-				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
-				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
-				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
-				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
-				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
-				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
-				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
-				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
-				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
-				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
-				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
-				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
-				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
-				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
-				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
-				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
-				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
-				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
-				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
-				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
-				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
-				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
-				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
-				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
-				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
-				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
-				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
-				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
-				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
-				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
-				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
-				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
-				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
-				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
-				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
-				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
-				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
-				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
-	ranges = <0 0 0x08000000 0x08000000>;
-	status = "disabled"; /* pin conflict with SPI NOR */
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		reg = <0 0 0x02000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		bank-width = <2>;
-		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
-				0x0000c000 0x1404a38e 0x00000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
deleted file mode 100644
index 12573e1f917cb..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ /dev/null
@@ -1,748 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- */
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	aliases {
-		mmc0 = &usdhc3;
-		mmc1 = &usdhc4;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-
-		reg_can_xcvr: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		reg_1p5v: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "1P5V";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-		};
-
-		reg_1p8v: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		reg_2p8v: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "2P8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			regulator-always-on;
-		};
-
-		reg_usb_h1_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	mipi_xclk: mipi_xclk {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <22000000>;
-		clock-output-names = "mipi_pwm3";
-		pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-	data-shift = <12>; /* Lines 19:12 used */
-	hsync-active = <1>;
-	vync-active = <1>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txen-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ov5640: camera@40 {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x40>;
-		clocks = <&mipi_xclk>;
-		clock-names = "xclk";
-		DOVDD-supply = <&reg_1p8v>;
-		AVDD-supply = <&reg_2p8v>;
-		DVDD-supply = <&reg_1p5v>;
-		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */
-		powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */
-
-		port {
-			ov5640_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-
-	ov5642: camera@42 {
-		compatible = "ovti,ov5642";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5642>;
-		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-names = "xclk";
-		reg = <0x42>;
-		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-
-		port {
-			ov5642_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-sabrelite {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SGTL5000 sys_mclk */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <
-				/* Flexcan XCVR enable */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Power Button */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				/* Menu Button */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				/* Home Button */
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				/* Back Button */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* Volume Up Button */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Volume Down Button */
-				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_ipu1_csi0: ipu1csi0grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
-				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
-				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
-				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
-				MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0
-			>;
-		};
-
-		pinctrl_j15: j15grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
-
-		pinctrl_ov5640: ov5640grp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D5__GPIO2_IO05   0x000b0
-				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0
-			>;
-		};
-
-		pinctrl_ov5642: ov5642grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x130b0
-				MX6QDL_PAD_GPIO_3__CCM_CLKO2    0x000b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0	/* WP */
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5640_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
deleted file mode 100644
index 53b080c97f2d9..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ /dev/null
@@ -1,851 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&swbst_reg>;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&swbst_reg>;
-	};
-
-	reg_audio: regulator-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "wm8962-supply";
-		gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_pcie: regulator-pcie {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_reg>;
-		regulator-name = "MPCIE_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_sensors: regulator-sensors {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sensors_reg>;
-		regulator-name = "sensors-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_POWER>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabresd-wm8962",
-			   "fsl,imx-audio-wm8962";
-		model = "wm8962-audio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hp>;
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-asrc = <&asrc>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC",
-			"DMIC", "MICBIAS",
-			"DMICDAT", "DMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-		hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>;
-		mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led-red {
-			gpios = <&gpio1 2 0>;
-			default-state = "on";
-		};
-	};
-
-	panel {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-	data-shift = <12>; /* Lines 19:12 used */
-	hsync-active = <1>;
-	vsync-active = <1>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5640_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&phy>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy: ethernet-phy@1 {
-			reg = <1>;
-			qca,clk-out-frequency = <125000000>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_cec>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: wm8962@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		DCVDD-supply = <&reg_audio>;
-		DBVDD-supply = <&reg_audio>;
-		AVDD-supply = <&reg_audio>;
-		CPVDD-supply = <&reg_audio>;
-		MICVDD-supply = <&reg_audio>;
-		PLLVDD-supply = <&reg_audio>;
-		SPKVDD1-supply = <&reg_audio>;
-		SPKVDD2-supply = <&reg_audio>;
-		gpio-cfg = <
-			0x0000 /* 0:Default */
-			0x0000 /* 1:Default */
-			0x0013 /* 2:FN_DMICCLK */
-			0x0000 /* 3:Default */
-			0x8014 /* 4:FN_DMICCDAT */
-			0x0000 /* 5:Default */
-		>;
-	};
-
-	accelerometer@1c {
-		compatible = "fsl,mma8451";
-		reg = <0x1c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&reg_sensors>;
-		vddio-supply = <&reg_sensors>;
-	};
-
-	ov5642: camera@3c {
-		compatible = "ovti,ov5642";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5642>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xclk";
-		reg = <0x3c>;
-		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
-		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
-						rev B board is VGEN5 */
-		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
-		powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		status = "disabled";
-
-		port {
-			ov5642_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
-	};
-
-	ov5640: camera@3c {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xclk";
-		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
-		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
-						rev B board is VGEN5 */
-		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
-		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-
-		port {
-			ov5640_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	egalax_ts@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
-	};
-
-	magnetometer@e {
-		compatible = "fsl,mag3110";
-		reg = <0x0e>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
-		vdd-supply = <&reg_sensors>;
-		vddio-supply = <&reg_sensors>;
-	};
-
-	light-sensor@44 {
-		compatible = "isil,isl29023";
-		reg = <0x44>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		vcc-supply = <&reg_sensors>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-sabresd {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
-				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
-				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
-				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio_keysgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
-			>;
-		};
-
-		pinctrl_hdmi_cec: hdmicecgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
-			>;
-		};
-
-		pinctrl_hp: hpgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_RST__GPIO7_IO08          0x1b0b0
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0xb0b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
-			>;
-		};
-
-		pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D16__GPIO3_IO16		0xb0b1
-			>;
-		};
-
-		pinctrl_ipu1_csi0: ipu1csi0grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
-				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
-				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
-				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
-			>;
-		};
-
-		pinctrl_ov5640: ov5640grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
-				MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
-			>;
-		};
-
-		pinctrl_ov5642: ov5642grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
-			>;
-		};
-
-		pinctrl_pcie_reg: pciereggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_sensors_reg: sensorsreggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
-				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
-				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
-				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
-			>;
-		};
-	};
-
-	gpio_leds {
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie>;
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&reg_arm {
-       vin-supply = <&sw1a_reg>;
-};
-
-&reg_pu {
-       vin-supply = <&sw1c_reg>;
-};
-
-&reg_soc {
-       vin-supply = <&sw1c_reg>;
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&vgen5_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&vgen5_reg>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <8>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&wdog2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
deleted file mode 100644
index 02e6d36e85fa8..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	panel {
-		compatible = "avic,tm097tdh02", "hannstar,hsd100pxn1";
-		backlight = <&panel_bl>;
-		power-supply = <&reg_3p3v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	panel_bl: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <4>;
-		power-supply = <&reg_3p3v>;
-		pwms = <&pwm1 0 10000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&fec {
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		reg = <0>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-/* SD card */
-&usdhc3 {
-	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sd>;
-	status = "okay";
-};
-
-/* eMMC */
-&usdhc4 {
-	bus-width = <8>;
-	keep-power-in-suspend;
-	no-1-8-v;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_emmc>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_emmc: emmcgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			/* PHY reset */
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_keys: gpiokeysgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_sd: sdgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			/* CD pin */
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
deleted file mode 100644
index b81799d7076aa..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
-
-/ {
-	touchscreen {
-		compatible = "resistive-adc-touch";
-		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
-		io-channel-names = "y", "z1", "z2", "x";
-		touchscreen-min-pressure = <65000>;
-		touchscreen-inverted-y;
-		touchscreen-swapped-x-y;
-		touchscreen-x-plate-ohms = <300>;
-		touchscreen-y-plate-ohms = <800>;
-	};
-};
-
-&ecspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	adc_ts: adc@0 {
-		compatible = "ti,tsc2046e-adc";
-		reg = <0>;
-		pinctrl-0 = <&pinctrl_touch>;
-		pinctrl-names ="default";
-		spi-max-frequency = <1000000>;
-		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
-		#io-channel-cells = <1>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@1 {
-			reg = <1>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@3 {
-			reg = <3>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@4 {
-			reg = <4>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-
-		channel@5 {
-			reg = <5>;
-			settling-time-us = <700>;
-			oversampling-ratio = <5>;
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI			0x100b1
-			MX6QDL_PAD_EIM_D22__ECSPI4_MISO			0x000b1
-			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK			0x000b1
-			/* *no* external pull up */
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x40000058
-		>;
-	};
-
-	pinctrl_touch: touchgrp {
-		fsl,pins = <
-			/* external pull up */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x10040
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
deleted file mode 100644
index 2731faede1cb4..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
+++ /dev/null
@@ -1,491 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	aliases {
-		can0 = &can1;
-		can1 = &can2;
-		mdio-gpio0 = &mdio;
-		nand = &gpmi;
-		rtc0 = &i2c_rtc;
-		rtc1 = &snvs;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, /* 24V */
-		              <&adc 1>; /* temperature */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			label = "D1";
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-			function = LED_FUNCTION_STATUS;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-1 {
-			label = "D2";
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-2 {
-			label = "D3";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	mdio: mdio {
-		compatible = "microchip,mdio-smi0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mdio>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>,
-			<&gpio1 22 GPIO_ACTIVE_HIGH>;
-
-		switch@0 {
-			compatible = "microchip,ksz8873";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_switch>;
-			interrupt-parent = <&gpio3>;
-			interrupt = <30 IRQ_TYPE_LEVEL_HIGH>;
-			reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			reg = <0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ports@0 {
-					reg = <0>;
-					phy-mode = "internal";
-					label = "lan1";
-				};
-
-				ports@1 {
-					reg = <1>;
-					phy-mode = "internal";
-					label = "lan2";
-				};
-
-				ports@2 {
-					reg = <2>;
-					label = "cpu";
-					ethernet = <&fec>;
-					phy-mode = "rmii";
-
-					fixed-link {
-						speed = <100>;
-						full-duplex;
-					};
-				};
-			};
-		};
-
-	};
-
-	clk50m_phy: phy-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-output-names = "enet_ref_pad";
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_5v0>;
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_24v0: regulator-24v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "24v0";
-		regulator-min-microvolt = <24000000>;
-		regulator-max-microvolt = <24000000>;
-	};
-
-	reg_can1_stby: regulator-can1-stby {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can1_stby>;
-		regulator-name = "can1-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_can2_stby: regulator-can2-stby {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can2_stby>;
-		regulator-name = "can2-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_tft_vcom: regulator-tft-vcom {
-		compatible = "pwm-regulator";
-		pwms = <&pwm3 0 20000 0>;
-		regulator-name = "tft_vcom";
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-		regulator-always-on;
-		voltage-table = <3600000 26>;
-	};
-
-	reg_vcc_mmc: regulator-vcc-mmc {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_vcc_mmc>;
-		vin-supply = <&reg_3v3>;
-		regulator-name = "mmc_vcc_supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <100>;
-	};
-
-	reg_vcc_mmc_io: regulator-vcc-mmc-io {
-		compatible = "regulator-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_vcc_mmc_io>;
-		vin-supply = <&reg_5v0>;
-		regulator-name = "mmc_io_supply";
-		regulator-type = "voltage";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		states = <1800000 0x1>, <3300000 0x0>;
-		startup-delay-us = <100>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can1_stby>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	xceiver-supply = <&reg_can2_stby>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <54000000>;
-		reg = <0>;
-	};
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	adc: adc@0 {
-		compatible = "microchip,mcp3002";
-		reg = <0>;
-		vref-supply = <&reg_3v3>;
-		spi-max-frequency = <1000000>;
-		#io-channel-cells = <1>;
-	};
-};
-
-&clks {
-	clocks = <&clk50m_phy>;
-	clock-names = "enet_ref_pad";
-	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
-	assigned-clock-parents = <&clk50m_phy>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-supply = <&reg_3v3>;
-	status = "okay";
-
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	i2c_rtc: rtc@51 {
-		compatible = "nxp,pcf85063";
-		reg = <0x51>;
-		quartz-load-femtofarads = <12500>;
-	};
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	#pwm-cells = <2>;
-	status = "okay";
-};
-
-&pwm3 {
-	/* used for LCD contrast control */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_5v0>;
-	disable-over-current;
-	status = "okay";
-};
-
-/* no usbh2 */
-&usbphynop1 {
-	status = "disabled";
-};
-
-/* no usbh3 */
-&usbphynop2 {
-	status = "disabled";
-};
-
-&usbotg {
-	vbus-supply = <&reg_5v0>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	cap-power-off-card;
-	full-pwr-cycle;
-	bus-width = <4>;
-	max-frequency = <50000000>;
-	cap-sd-highspeed;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-ddr50;
-	mmc-ddr-1_8v;
-	vmmc-supply = <&reg_vcc_mmc>;
-	vqmmc-supply = <&reg_vcc_mmc_io>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX			0x3008
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX			0x1b000
-		>;
-	};
-
-	pinctrl_can1_stby: can1stbygrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x13008
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
-		>;
-	};
-
-	pinctrl_can2_stby: can2stbygrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11			0x13008
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0xb1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0xb1
-			/* *no* external pull up */
-			MX6QDL_PAD_EIM_D24__GPIO3_IO24			0x58
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0xb1
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0xb1
-			/* external pull up */
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x58
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			/* RMII 50 MHz */
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x100f5
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x100f5
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x100c0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x100c0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x100f5
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x100f5
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05			0x58
-			/* GPIO for "link active" */
-			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24		0x3038
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE			0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE			0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B		0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B		0xb0b1
-			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B		0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B			0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B			0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00		0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01		0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02		0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03		0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04		0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05		0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06		0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07		0xb0b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			/* external 10 k pull up */
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x40010878
-			/* external 10 k pull up */
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x40010878
-		>;
-	};
-
-	pinctrl_mdio: mdiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__GPIO1_IO22		0x100b1
-			MX6QDL_PAD_ENET_MDC__GPIO1_IO31			0xb1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT			0x58
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT			0x58
-		>;
-	};
-
-	pinctrl_switch: switchgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0xb0
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			/* SoC internal pull up required */
-			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17059
-			/* SoC internal pull up required */
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01			0x1b040
-			/* SoC internal pull up required */
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00			0x1b040
-		>;
-	};
-
-	pinctrl_vcc_mmc: vccmmcgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08			0x58
-		>;
-	};
-
-	pinctrl_vcc_mmc_io: vccmmciogrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13			0x58
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi b/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi
deleted file mode 100644
index 48c9ce051f47c..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi
+++ /dev/null
@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright (C) 2021 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
-
-/ {
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
-		pwms = <&pwm2 0 20000 0>;
-		brightness-levels = <0 255>;
-		num-interpolated-steps = <17>;
-		default-brightness-level = <8>;
-		power-supply = <&reg_24v0>;
-	};
-
-	display {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1>;
-
-		port@0 {
-			reg = <0>;
-
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			display0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	panel {
-		compatible = "logictechno,lttd800480070-l2rt";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display0_out>;
-			};
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&iomuxc {
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
-		>;
-	};
-
-	pinctrl_ipu1: ipu1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-solidsense.dtsi b/arch/arm/boot/dts/imx6qdl-solidsense.dtsi
deleted file mode 100644
index 234827e554d0f..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-solidsense.dtsi
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright (C) 2021 Russell King <rmk@armlinux.org.uk>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/leds/common.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_solidsense_leds>;
-
-		/* Red/Green LED1 - next to WiFi SMA */
-		led-11 {
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <0>;
-			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-		};
-
-		led-12 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <0>;
-			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Red/Green LED2 - next to GPS SMA */
-		led-21 {
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <1>;
-			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-		};
-
-		led-22 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <1>;
-			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&audio {
-	status = "disabled";
-};
-
-&ecspi2 {
-	status = "disabled";
-};
-
-&i2c3 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>, <&pinctrl_solidsense_hog>;
-
-	solidsense {
-		pinctrl_solidsense_hog: solidsense-hog {
-			fsl,pins = <
-				/* Nordic RESET_N */
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x400130b1
-				/* Nordic Chip 1 SWDIO - GPIO 125 */
-				MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x400130b1
-				/* Nordic Chip 1 SWDCLK - GPIO 59 */
-				/* already claimed in the HB2 hogs */
-				/* MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 */
-				/* Nordic Chip 2 SWDIO - GPIO 81 */
-				MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x400130b1
-				/* Nordic Chip 2 SWCLK - GPIO 82 */
-				MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x400130b1
-			>;
-		};
-
-		pinctrl_solidsense_leds: solidsense-leds {
-			fsl,pins = <
-				/* Red LED 1 - GPIO 58 */
-				MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x400130b1
-				/* Green LED 1 - GPIO 55 */
-				MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x400130b1
-				/* Red LED 2 - GPIO 57 */
-				MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x400130b1
-				/* Green LED 2 - GPIO 56 */
-				MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x400130b1
-			>;
-		};
-
-		pinctrl_solidsense_uart2: solidsense-uart2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_solidsense_uart3: solidsense-uart3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	status = "disabled";
-};
-
-&sgtl5000 {
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_solidsense_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_solidsense_uart3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi
deleted file mode 100644
index b55af61dfecab..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-/ {
-	clk_brcm: brcm-clock {
-		compatible = "gpio-gate-clock";
-		#clock-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
-		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_brcm: brcm-reg {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 19 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
-		regulator-name = "brcm_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
-	usdhc1_pwrseq: usdhc1_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
-			      <&gpio6 0 GPIO_ACTIVE_LOW>;
-		clocks = <&clk_brcm>;
-		clock-names = "ext_clock";
-	};
-};
-
-&iomuxc {
-	microsom {
-		pinctrl_microsom_brcm_bt: microsom-brcm-bt {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
-				MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
-				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_osc: microsom-brcm-osc {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_reg: microsom-brcm-reg {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
-				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
-				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
-				MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_uart4: microsom-uart4 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
-
-		pinctrl_microsom_usdhc1: microsom-usdhc1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-			>;
-		};
-	};
-};
-
-/* UART4 - Connected to optional BRCM Wifi/BT/FM */
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
-	bus-width = <4>;
-	mmc-pwrseq = <&usdhc1_pwrseq>;
-	keep-power-in-suspend;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&reg_brcm>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi
deleted file mode 100644
index 5f3b8baab20ff..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-&iomuxc {
-	microsom {
-		pinctrl_microsom_usdhc3: microsom-usdhc3 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
-			>;
-		};
-	};
-};
-
-/* USDHC3 - eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_usdhc3>;
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&vcc_3v3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
deleted file mode 100644
index 352ac585ca6b8..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	nvcc_sd1: regulator-nvcc-sd1 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-name = "nvcc_sd1";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_3v3>;
-	};
-
-	clk_ti_wifi: ti-wifi-clock {
-		/* This is a hack around the kernel - using "fixed clock"
-		 * results in the "pinctrl" properties being ignored, and
-		 * the clock not being output.  Instead, use a gated clock
-		 * and the unrouted WL_XTAL_PU gpio.
-		 */
-		compatible = "gpio-gate-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_ti_clk>;
-		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	pwrseq_ti_wifi: ti-wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_ti_wifi_en>;
-		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <200>;
-		clocks = <&clk_ti_wifi>;
-		clock-names = "ext_clock";
-	};
-};
-
-&iomuxc {
-	microsom {
-		pinctrl_microsom_ti_bt: microsom-ti-bt {
-			fsl,pins = <
-				/* BT_EN_SOC */
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_ti_clk: microsom-ti-clk {
-			fsl,pins = <
-				/* EXT_32K */
-				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
-				/* WL_XTAL_PU (unrouted) */
-				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
-			>;
-		};
-
-		pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-en {
-			fsl,pins = <
-				/* WLAN_EN_SOC */
-				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irq {
-			fsl,pins = <
-				/* WLAN_IRQ */
-				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_uart4: microsom-uart4 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
-
-		pinctrl_microsom_usdhc1: microsom-usdhc1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-			>;
-		};
-	};
-};
-
-/* UART4 - Connected to optional TI Wi-Fi/BT/FM */
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "ti,wl1837-st";
-		clocks = <&clk_ti_wifi>;
-		clock-names = "ext_clock";
-		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_ti_bt>;
-	};
-};
-
-/* USDHC1 - Connected to optional TI Wi-Fi/BT/FM */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_usdhc1>;
-	bus-width = <4>;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&pwrseq_ti_wifi>;
-	cap-power-off-card;
-	non-removable;
-	vmmc-supply = <&vcc_3v3>;
-	/* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	wlcore@2 {
-		compatible = "ti,wl1837";
-		reg = <2>;
-		interrupts-extended = <&gpio6 4 IRQ_TYPE_LEVEL_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_ti_wifi_irq>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
deleted file mode 100644
index ce543e325cd30..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	vcc_3v3: regulator-vcc-3v3 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-name = "vcc_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
-	phy-mode = "rgmii-id";
-
-	/*
-	 * The PHY seems to require a long-enough reset duration to avoid
-	 * some rare issues where the PHY gets stuck in an inconsistent and
-	 * non-functional state at boot-up. 10ms proved to be fine .
-	 */
-	phy-reset-duration = <10>;
-	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/*
-		 * The PHY can appear at either address 0 or 4 due to the
-		 * configuration (LED) pin not being pulled sufficiently.
-		 */
-		ethernet-phy@0 {
-			reg = <0>;
-			qca,clk-out-frequency = <125000000>;
-			qca,smarteee-tw-us-1g = <24>;
-		};
-
-		ethernet-phy@4 {
-			reg = <4>;
-			qca,clk-out-frequency = <125000000>;
-			qca,smarteee-tw-us-1g = <24>;
-		};
-
-		/*
-		 * ADIN1300 (som rev 1.9 or later) is always at address 1. It
-		 * will be enabled automatically by U-Boot if detected.
-		 */
-		ethernet-phy@1 {
-			reg = <1>;
-			adi,phy-output-clock = "125mhz-free-running";
-			status = "disabled";
-		};
-	};
-};
-
-&iomuxc {
-	microsom {
-		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				/* AR8035 reset */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
-				/* AR8035 interrupt */
-				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
-				/* GPIO16 -> AR8035 25MHz */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x13030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
-				/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
-				/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-				/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-
-				/*
-				 * As the RMII pins are also connected to RGMII
-				 * so that an AR8030 can be placed, set these
-				 * to high-z with the same pulls as above.
-				 * Use the GPIO settings to avoid changing the
-				 * input select registers.
-				 */
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
-			>;
-		};
-
-		pinctrl_microsom_uart1: microsom-uart1 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_uart1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
deleted file mode 100644
index 344ea935c7dac..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
+++ /dev/null
@@ -1,215 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "supply-3p3v";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	m25p80: flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		m25p,fast-read;
-	};
-};
-
-&iomuxc {
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			/* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b099
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb099
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099
-			 /* eCSPI1 SS1 */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
-		>;
-	};
-
-	pinctrl_i2c1_recovery: i2c1recoverygrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b899
-			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b899
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
-			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
-		>;
-	};
-
-	pinctrl_i2c3_recovery: i2c3recoverygrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-		>;
-	};
-};
-
-&pmic {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pmic>;
-	interrupt-parent = <&gpio6>;
-	interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-
-	regulators {
-		reg_vddcore: sw1ab {
-			regulator-min-microvolt = <300000>;
-			regulator-max-microvolt = <1875000>;
-			regulator-always-on;
-		};
-
-		reg_vddsoc: sw1c {
-			regulator-min-microvolt = <300000>;
-			regulator-max-microvolt = <1875000>;
-			regulator-always-on;
-		};
-
-		reg_gen_3v3: sw2 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_ddr_1v5a: sw3a {
-			regulator-min-microvolt = <400000>;
-			regulator-max-microvolt = <1975000>;
-			regulator-always-on;
-		};
-
-		reg_ddr_1v5b: sw3b {
-			regulator-min-microvolt = <400000>;
-			regulator-max-microvolt = <1975000>;
-			regulator-always-on;
-		};
-
-		sw4_reg: sw4 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_5v_600mA: swbst {
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5150000>;
-			regulator-always-on;
-		};
-
-		reg_snvs_3v: vsnvs {
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-		};
-
-		reg_vrefddr: vrefddr {
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		reg_vgen1_1v5: vgen1 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1550000>;
-			/* not used */
-		};
-
-		reg_vgen2_1v2_eth: vgen2 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1550000>;
-			regulator-always-on;
-		};
-
-		reg_vgen3_2v8: vgen3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vgen4_1v8: vgen4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vgen5_1v8_eth: vgen5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vgen6_3v3: vgen6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	disable-wp;
-	no-sd;
-	no-sdio;
-	bus-width = <8>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	mmccard: mmccard@0 {
-		reg = <0>;
-		compatible = "mmc-card";
-		broken-hpi;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
deleted file mode 100644
index aff46f3040c16..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-&fec {
-	/delete-property/ interrupts;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-};
-
-&i2c1 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_recovery>;
-	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pmic: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-	};
-
-	sensor@48 {
-		compatible = "national,lm75";
-		reg = <0x48>;
-	};
-
-	eeprom@50 {
-		compatible = "st,24c64", "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-		vcc-supply = <&reg_3p3v>;
-	};
-};
-
-&iomuxc {
-	/*
-	 * This pinmuxing is required for the ERR006687 workaround. Board
-	 * DTS files that enable the FEC controller with
-	 * fsl,err006687-workaround-present must include this group.
-	 */
-	pinctrl_enet_fix: enetfixgrp {
-		fsl,pins = <
-			/* ENET ping patch */
-			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
deleted file mode 100644
index a3f6543c3aaa6..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-&i2c3 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_recovery>;
-	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pmic: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-	};
-
-	sensor@48 {
-		compatible = "national,lm75";
-		reg = <0x48>;
-	};
-
-	eeprom@50 {
-		compatible = "st,24c64", "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-		vcc-supply = <&reg_3p3v>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
deleted file mode 100644
index f88da757edda5..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
+++ /dev/null
@@ -1,479 +0,0 @@
-/*
- * Copyright 2015 Technologic Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	aliases {
-		ethernet0 = &fec;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds1>;
-		compatible = "gpio-leds";
-
-		green-led {
-			label = "green-led";
-			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		red-led {
-			label = "red-led";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3p3v";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	n25q064: flash@0 {
-		compatible = "micron,n25q064", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	isl12022: rtc@6f {
-		compatible = "isil,isl12022";
-		reg = <0x6f>;
-	};
-
-	gpio8: gpio@28 {
-		compatible = "technologic,ts4900-gpio";
-		reg = <0x28>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		ngpio = <32>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x100b1 /* Onboard flash CS1# */
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
-			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
-			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
-			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x100b1 /* Offboard CS0# */
-			MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02	0x100b1 /* FPGA CS1# */
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1 /* FPGA_RESET# */
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* FPGA_DONE */
-			MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M	0x10    /* FPGA 24MHZ */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1 /* FPGA_IRQ */
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x4001b0a8
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b1 /* ETH_PHY_RESET */
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b1
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1 /* OFF_BD_RESET# */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1 /* EN_USB_5V# */
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x1b0b1 /* EN_LCD_3.3V */
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* Audio CLK */
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1 /* DIO_1 */
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b1 /* DIO_2 */
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b1 /* DIO_3 */
-			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b1 /* DIO_4 */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1 /* DIO_5 */
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b1 /* DIO_7 */
-			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b1 /* DIO_8 */
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b1 /* DIO_9 */
-			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b1 /* DIO_0 */
-			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b1 /* DIO_6 */
-			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x1b0b1 /* CPU_DIO_A */
-			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b1 /* DIO_2 */
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b1 /* CPU_DIO_B */
-			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1 /* BUS_ALE# */
-			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1 /* DIO_15 */
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1 /* BUS_DIR */
-			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1 /* BUS_CS# */
-			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* DIO_14 */
-			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x1b0b1 /* DIO_16 */
-			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b0b1 /* DIO_12 */
-			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1 /* DIO_18 */
-			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b1 /* DIO_19 */
-			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1 /* DIO_20 */
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b1 /* BUS_BHE# */
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1 /* DIO_13 */
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1 /* EIM_WAIT# */
-			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b1 /* DIO_10 */
-			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1 /* MUX_AD_00 */
-			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1 /* MUX_AD_01 */
-			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1 /* MUX_AD_02 */
-			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1 /* MUX_AD_03 */
-			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1 /* MUX_AD_04 */
-			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1 /* MUX_AD_05 */
-			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1 /* MUX_AD_06 */
-			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1 /* MUX_AD_07 */
-			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1 /* MUX_AD_08 */
-			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1 /* MUX_AD_09 */
-			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1 /* MUX_AD_10 */
-			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1 /* MUX_AD_11 */
-			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1 /* MUX_AD_12 */
-			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1 /* MUX_AD_13 */
-			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1 /* MUX_AD_14 */
-			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1 /* MUX_AD_15 */
-			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1 /* LCD_CLK */
-			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x1b0b1 /* DE */
-			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b1 /* Hsync */
-			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b1 /* Vsync */
-			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b1
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
-		>;
-	};
-
-	pinctrl_leds1: leds1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1 /* RED_LED# */
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1 /* GREEN_LED# */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
-			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x17059 /* WIFI IRQ */
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b1 /* EN_SD_POWER# */
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-		>;
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-/* SD */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_3p3v>;
-	bus-width = <4>;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
deleted file mode 100644
index 1e0a041e9f60a..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ /dev/null
@@ -1,594 +0,0 @@
-/*
- * Copyright 2015 Technologic Systems
- * Copyright 2017 Savoir-Faire Linux
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds1>;
-		compatible = "gpio-leds";
-
-		green-led {
-			label = "green-led";
-			gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		red-led {
-			label = "red-led";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		yel-led {
-			label = "yellow-led";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-led {
-			label = "blue-led";
-			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		en-usb-5v-led {
-			label = "en-usb-5v";
-			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		sel-dc-usb-led {
-			label = "sel_dc_usb";
-			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3p3v";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_can1_3v3: reg_can1_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "reg_can1_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_can2_3v3: en-reg_can2_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "reg_can2_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_wlan_vmmc: regulator_wlan_vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan_vmmc";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio8 14 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	sound-sgtl5000 {
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "On-board Codec";
-		mux-ext-port = <3>;
-		mux-int-port = <1>;
-		ssi-controller = <&ssi1>;
-	};
-};
-
-&audmux {
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can1_3v3>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can2_3v3>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	n25q064: flash@0 {
-		compatible = "micron,n25q064", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <
-		&gpio5 31 GPIO_ACTIVE_LOW
-		&gpio7 12 GPIO_ACTIVE_LOW
-		&gpio5 18 GPIO_ACTIVE_LOW
-	>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	/delete-property/ interrupts;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	m41t00s: rtc@68 {
-		compatible = "m41t00";
-		reg = <0x68>;
-	};
-
-	isl12022: rtc@6f {
-		compatible = "isl,isl12022";
-		reg = <0x6f>;
-	};
-
-	gpio8: gpio@28 {
-		compatible = "technologic,ts7970-gpio";
-		reg = <0x28>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		ngpios = <62>;
-	};
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x100b1 /* Onboard Flash CS */
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2 {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK      0x100b1
-			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI      0x100b1
-			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO     0x100b1
-			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31      0x100b1 /* FPGA_SPI_CS0 */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12         0x100b1 /* FPGA_SPI_CS1 */
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18     0x100b1 /* HD1_SPI_CS */
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21      0x1b088 /* FPGA_RESET */
-			MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x10    /* FPGA 24MHZ */
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20    0x1b088 /* FPGA_IRQ_0 */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04          0x1b088 /* FPGA_IRQ_1 */
-		>;
-	};
-
-	pinctrl_enet: enet {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b088
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b088 /* ETH_PHY_RESET */
-			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b088
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b088
-			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b088 /* EN_CAN_1 */
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b088
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b088
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b088 /* EN_CAN_2 */
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			/* Onboard */
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b088 /* USB_HUB_RESET */
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b088 /* SEL_DC_USB */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b088 /* EN_USB_5V */
-			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b088 /* JTAG_FPGA_TMS */
-			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b088 /* JTAG_FPGA_TCK */
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b088 /* JTAG_FPGA_TDO */
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b088 /* JTAG_FPGA_TDI */
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b088 /* GYRO_INT */
-			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b088 /* MODBUS_FAULT */
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b088 /* BUS_DIR/JP_SD_BOOT */
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x1b088 /* EN_MODBUS_24V */
-			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b088 /* EN_MODBUS_3V */
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b088 /* I210_RESET */
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b088 /* EN_RTC_PWR */
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b088 /* REVSTRAP1 */
-
-			/* Offboard */
-			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b088 /* LCD_D09 */
-			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b088 /* HD1_IRQ */
-			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b088 /* LCD_D10 */
-			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x1b088 /* LCD_D11 */
-			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b088 /* BUS_BHE */
-			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b088 /* BUS_ALE */
-			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b088 /* BUS_CS */
-			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b088 /* DIO_20 */
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b088 /* BUS_WAIT */
-			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b088 /* MUX_AD_00 */
-			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b088 /* MUX_AD_01 */
-			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b088 /* MUX_AD_02 */
-			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b088 /* MUX_AD_03 */
-			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b088 /* MUX_AD_04 */
-			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b088 /* MUX_AD_05 */
-			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b088 /* MUX_AD_06 */
-			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b088 /* MUX_AD_07 */
-			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b088 /* MUX_AD_08 */
-			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b088 /* MUX_AD_09 */
-			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b088 /* MUX_AD_10 */
-			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b088 /* MUX_AD_11 */
-			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b088 /* MUX_AD_12 */
-			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b088 /* MUX_AD_13 */
-			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b088 /* MUX_AD_14 */
-			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b088 /* MUX_AD_15 */
-
-			/* Strapping only */
-			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b088
-			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b088
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
-		>;
-	};
-
-	pinctrl_leds1: leds1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x1b088 /* GREEN_LED */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b088 /* RED_LED */
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b088 /* YEL_LED */
-			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b088 /* IMX6_BLUE_LED */
-		>;
-	};
-
-	pinctrl_sgtl5000: sgtl5000grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* Audio CLK */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b088
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b088
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b088
-			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b088
-			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b088
-			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b088
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b088
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b088
-			MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b088
-			MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b088
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b088
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b088
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b088
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b088
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
-			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x17059 /* WIFI IRQ */
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b088 /* EN_SD_POWER */
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-		>;
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&snvs_rtc {
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-/* WIFI */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	vmmc-supply = <&reg_wlan_vmmc>;
-	bus-width = <4>;
-	non-removable;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-/* SD */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_3p3v>;
-	bus-width = <4>;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
deleted file mode 100644
index 79f2354886b7d..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd1_pwr>;
-		enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		power-supply = <&reg_3v3>;
-		turn-on-delay-ms = <35>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	lcd_panel: lcd-panel {
-		compatible = "edt,etm0700g0dh6";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd0_pwr>;
-		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		power-supply = <&reg_3v3>;
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_out>;
-			};
-		};
-	};
-
-	display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				u-boot,panel-name = "edt,et057090dhu";
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				u-boot,panel-name = "edt,et0350g0dh6";
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				u-boot,panel-name = "edt,et0430g0dh6";
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				u-boot,panel-name = "edt,etm0700g0dh6";
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			CoMTFT { /* same as ET0700 but with inverted pixel clock */
-				u-boot,panel-name = "edt,etm0700g0edh6";
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_in>;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
deleted file mode 100644
index 2ca2eb37e14fc..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_lcd0_pwr>;
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_lcd1_pwr>;
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	lvds0_panel: lvds0-panel {
-		compatible = "nlt,nl12880bc20-spwg-24";
-		backlight = <&backlight0>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	lvds1_panel: lvds1-panel {
-		compatible = "nlt,nl12880bc20-spwg-24";
-		backlight = <&backlight1>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in_lvds1: endpoint {
-				remote-endpoint = <&lvds1_out>;
-			};
-		};
-	};
-};
-
-&kpp {
-	status = "disabled"; /* pad conflict with backlight1 PWM */
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-
-		display-timings {
-			hsd100pxn1 {
-				u-boot,panel-name = "hannstar,hsd100pxn1";
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vfront-porch = <12>;
-				hsync-len = <96>;
-				vsync-len = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			nl12880bc20 {
-				u-boot,panel-name = "nlt,nl12880bc20-spwg-24";
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				hsync-len = <60>;
-				vsync-len = <13>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0700 {
-				u-boot,panel-name = "edt,etm0700g0dh6";
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				u-boot,panel-name = "edt,et057090dhu";
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds1_out: endpoint {
-				remote-endpoint = <&panel_in_lvds1>;
-			};
-		};
-
-		display-timings {
-			hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vfront-porch = <12>;
-				hsync-len = <96>;
-				vsync-len = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			nl12880bc20 {
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				hsync-len = <60>;
-				vsync-len = <13>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&reg_lcd0_pwr {
-	status = "okay";
-};
-
-&reg_lcd1_pwr {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
deleted file mode 100644
index 99ec7a838f8d2..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	backlight0 {
-		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
-		turn-on-delay-ms = <35>;
-		power-supply = <&reg_lcd1_pwr>;
-	};
-
-	backlight1 {
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		turn-on-delay-ms = <35>;
-		power-supply = <&reg_lcd1_pwr>;
-	};
-
-	lcd-panel {
-		compatible = "edt,et057090dhu";
-		pixelclk-active = <0>;
-	};
-
-	lvds0-panel {
-		compatible = "edt,etml1010g0dka";
-		pixelclk-active = <0>;
-	};
-
-	lvds1-panel {
-		compatible = "edt,etml1010g0dka";
-		pixelclk-active = <0>;
-	};
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ds1339 {
-	/*
-	 * The backup voltage of the module internal RTC is not wired
-	 * by default on the MB7, so disable that RTC chip.
-	 */
-	status = "disabled";
-};
-
-&i2c3 {
-	rtc: rtc@6f {
-		compatible = "microchip,mcp7940x";
-		reg = <0x6f>;
-	};
-};
-
-&reg_lcd0_pwr {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
deleted file mode 100644
index a197bac95cbac..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ /dev/null
@@ -1,792 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	aliases {
-		can0 = &can2;
-		can1 = &can1;
-		ethernet0 = &fec;
-		lcdif-23bit-pins-a = &pinctrl_disp0_1;
-		lcdif-24bit-pins-a = &pinctrl_disp0_2;
-		pwm0 = &pwm1;
-		pwm1 = &pwm2;
-		reg-can-xcvr = &reg_can_xcvr;
-		stk5led = &user_led;
-		usbotg = &usbotg;
-		sdhc0 = &usdhc1;
-		sdhc1 = &usdhc2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>; /* will be filled by U-Boot */
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mclk: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led: led-user {
-			label = "Heartbeat";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_user_led>;
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_3v3_etn: regulator-3v3-etn {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3_ETN";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_etnphy_power>;
-		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_2v5: regulator-2v5 {
-		compatible = "regulator-fixed";
-		regulator-name = "2V5";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_can_xcvr: regulator-can-xcvr {
-		compatible = "regulator-fixed";
-		regulator-name = "CAN XCVR";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flexcan_xcvr>;
-		gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_lcd0_pwr: regulator-lcd0-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD0 POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd0_pwr>;
-		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		status = "disabled";
-	};
-
-	reg_lcd1_pwr: regulator-lcd1-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD1 POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd1_pwr>;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		status = "disabled";
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbh1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1_vbus>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usbotg_vbus: regulator-usbotg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbotg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg_vbus>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "karo,imx6qdl-tx6-sgtl5000",
-			     "simple-audio-card";
-		simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_audmux>;
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&codec_dai>;
-		simple-audio-card,frame-master = <&codec_dai>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Line", "Line In",
-			"Line", "Line Out",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-
-		cpu_dai: simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		codec_dai: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			IMX_AUDMUX_V2_PTCR_TFSEL(4) |
-			IMX_AUDMUX_V2_PTCR_TCSEL(4) |
-			IMX_AUDMUX_V2_PTCR_TFSDIR |
-			IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
-		>;
-	};
-
-	pins5 {
-		fsl,audmux-port = <4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <
-		&gpio2 30 GPIO_ACTIVE_HIGH
-		&gpio3 19 GPIO_ACTIVE_HIGH
-	>;
-	status = "disabled";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	phy-reset-post-delay = <10>;
-	phy-handle = <&etnphy>;
-	phy-supply = <&reg_3v3_etn>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		etnphy: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_etnphy_int>;
-			interrupt-parent = <&gpio7>;
-			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	fsl,no-blockmark-swap;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	ds1339: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-		trickle-resistor-ohms = <250>;
-		trickle-diode-disable;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	sgtl5000: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		VDDA-supply = <&reg_2v5>;
-		VDDIO-supply = <&reg_3v3>;
-		clocks = <&mclk>;
-	};
-
-	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_edt_ft5x06>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-
-	touchscreen: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <26 0>;
-		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-		ti,x-plate-ohms = <660>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1 /* PWR BTN */
-		>;
-	};
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW1__AUD5_RXD		0x130b0 /* SSI1_RXD */
-			MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0 /* SSI1_TXD */
-			MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0 /* SSI1_CLK */
-			MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0 /* SSI1_FS */
-		>;
-	};
-
-	pinctrl_disp0_1: disp0grp-1 {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-			/* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-		>;
-	};
-
-	pinctrl_disp0_2: disp0grp-2 {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x0b0b0
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x0b0b0
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x0b0b0
-			MX6QDL_PAD_GPIO_19__ECSPI1_RDY		0x0b0b0
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x0b0b0 /* SPI CS0 */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x0b0b0 /* SPI CS1 */
-		>;
-	};
-
-	pinctrl_edt_ft5x06: edt-ft5x06grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* Interrupt */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b0 /* Reset */
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b0 /* Wake */
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-		>;
-	};
-
-	pinctrl_enet_mdio: enet-mdiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-		>;
-	};
-
-	pinctrl_etnphy_int: etnphy-intgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b1 /* ETN PHY INT */
-		>;
-	};
-
-	pinctrl_etnphy_power: etnphy-pwrgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1 /* ETN PHY POWER */
-		>;
-	};
-
-	pinctrl_etnphy_rst: etnphy-rstgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT2__GPIO7_IO06		0x1b0b1 /* ETN PHY RESET */
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b0 /* Flexcan XCVR enable */
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0x0b0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0x0b0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0x0b0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0x0b0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0x0b0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0x0b0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0x0b0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0x0b0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0x0b0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0x0b0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0x0b0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0x0b0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0x0b0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0x0b0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1-gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3-gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x4001b8b1
-		>;
-	};
-
-	pinctrl_kpp: kppgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__KEY_COL6		0x1b0b1
-			MX6QDL_PAD_GPIO_4__KEY_COL7		0x1b0b1
-			MX6QDL_PAD_KEY_COL2__KEY_COL2		0x1b0b1
-			MX6QDL_PAD_KEY_COL3__KEY_COL3		0x1b0b1
-			MX6QDL_PAD_GPIO_2__KEY_ROW6		0x1b0b1
-			MX6QDL_PAD_GPIO_5__KEY_ROW7		0x1b0b1
-			MX6QDL_PAD_KEY_ROW2__KEY_ROW2		0x1b0b1
-			MX6QDL_PAD_KEY_ROW3__KEY_ROW3		0x1b0b1
-		>;
-	};
-
-	pinctrl_lcd0_pwr: lcd0-pwrgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1 /* LCD Reset */
-		>;
-	};
-
-	pinctrl_lcd1_pwr: lcd-pwrgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b1 /* LCD Power Enable */
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_tsc2007: tsc2007grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0 /* Interrupt */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1_rtscts: uart1_rtsctsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT1__UART1_RTS_B	0x1b0b1
-			MX6QDL_PAD_SD3_DAT0__UART1_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2_rtscts: uart2_rtsctsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3_rtscts: uart3_rtsctsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT3__UART3_CTS_B	0x1b0b1
-			MX6QDL_PAD_SD3_RST__UART3_RTS_B		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbh1_vbus: usbh1-vbusgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b0 /* USBH1_VBUSEN */
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x17059
-		>;
-	};
-
-	pinctrl_usbotg_vbus: usbotg-vbusgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* USBOTG_VBUSEN */
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
-			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
-			MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x070b1
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x070b1
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x070b1
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x070b1
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x070b1
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x070b1
-			MX6QDL_PAD_SD3_CLK__GPIO7_IO03		0x170b0 /* SD2 CD */
-		>;
-	};
-
-	pinctrl_user_led: user-ledgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* LED */
-		>;
-	};
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	/* sample keymap */
-	/* row/col 0,1 are mapped to KPP row/col 6,7 */
-	linux,keymap = <
-		MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */
-		MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */
-		MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */
-		MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */
-		MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */
-		MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */
-		MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */
-		MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */
-		MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */
-		MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */
-		MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */
-	>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "disabled";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usbotg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "peripheral";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <4>;
-	no-1-8-v;
-	cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	no-1-8-v;
-	cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
deleted file mode 100644
index 93a8123da27db..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ /dev/null
@@ -1,327 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	aliases {
-		backlight = &backlight;
-		panelchan = &panelchan;
-		panel7 = &panel7;
-		touchscreenp7 = &touchscreenp7;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight: backlight {
-		compatible = "gpio-backlight";
-		gpios = <&gpio1 4 0>;
-		default-on;
-		status = "disabled";
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio2 4 0>;
-		pinctrl-0 = <&pinctrl_power_off>;
-		pinctrl-names = "default";
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	panel7: panel7 {
-		/*
-		 * in reality it is a -20t (parallel) model,
-		 * but with LVDS bridge chip attached,
-		 * so it is equivalent to -19t model in drive
-		 * characteristics
-		 */
-		compatible = "urt,umsh-8596md-19t";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_panel>;
-		power-supply = <&reg_panel>;
-		backlight = <&backlight>;
-		status = "disabled";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb_h1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
-			gpio = <&gpio7 12 0>;
-		};
-
-		reg_panel: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd_panel";
-			enable-active-high;
-			gpio = <&gpio1 2 0>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-udoo-ac97",
-			     "fsl,imx-audio-ac97";
-		model = "fsl,imx6q-udoo-ac97";
-		audio-cpu = <&ssi1>;
-		audio-routing =
-			"RX", "Mic Jack",
-			"Headphone Jack", "TX";
-		mux-int-port = <1>;
-		mux-ext-port = <6>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreenp7: touchscreenp7@55 {
-		compatible = "sitronix,st1232";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreenp7>;
-		reg = <0x55>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 8>;
-		gpios = <&gpio1 15 0>;
-		status = "disabled";
-	};
-};
-
-&iomuxc {
-	imx6q-udoo {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
-			>;
-		};
-
-		pinctrl_panel: panelgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x70
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x70
-			>;
-		};
-
-		pinctrl_power_off: poweroffgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x30
-			>;
-		};
-
-		pinctrl_touchscreenp7: touchscreenp7grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x70
-				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh: usbhgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
-				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotg {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-				MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_ac97_running: ac97running {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			>;
-		};
-
-		pinctrl_ac97_warm_reset: ac97warmreset {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			>;
-		};
-
-		pinctrl_ac97_reset: ac97reset {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
-				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	panelchan: lvds-channel@0 {
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	clocks = <&clks IMX6QDL_CLK_CKO>;
-	status = "disabled";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&audmux {
-	status = "okay";
-};
-
-&ssi1 {
-	cell-index = <0>;
-	fsl,mode = "ac97-slave";
-	pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
-	pinctrl-0 = <&pinctrl_ac97_running>;
-	pinctrl-1 = <&pinctrl_ac97_reset>;
-	pinctrl-2 = <&pinctrl_ac97_warm_reset>;
-	ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
deleted file mode 100644
index c41cac502bacc..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
+++ /dev/null
@@ -1,504 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Support for Variscite DART-MX6 Module
- *
- * Copyright 2017 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_wl18xx_vmmc: regulator-wl18xx {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1807";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <70000>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	ssi2 {
-		fsl,audmux-port = <1>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			IMX_AUDMUX_V2_PTCR_TFSDIR |
-			IMX_AUDMUX_V2_PTCR_TFSEL(2) |
-			IMX_AUDMUX_V2_PTCR_TCLKDIR |
-			IMX_AUDMUX_V2_PTCR_TCSEL(2))
-			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
-	};
-
-	aud3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "disabled";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	status = "disabled";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmicec>;
-	ddc-i2c-bus = <&i2c1>;
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "disabled";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic@8 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-
-	tlv320aic3106: codec@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		#sound-dai-cells = <0>;
-		DRVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_3p3v>;
-		IOVDD-supply = <&reg_3p3v>;
-		DVDD-supply = <&reg_3p3v>;
-		ai3x-ocmv = <0>;
-		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_audmux: audmux {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			/* Audio Clock */
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
-		>;
-	};
-
-	pinctrl_bt: bt {
-		fsl,pins = <
-			/* Bluetooth enable */
-			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b1
-			/* Bluetooth Slow Clock */
-			MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT	0x000b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
-			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
-			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
-			/* SPI1 CS0 */
-			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
-			/* SPI1 CS1 */
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX	0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_hdmicec: hdmicecgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
-			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			/* PMIC INT */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b1
-			MX6QDL_PAD_EIM_EB3__UART3_RTS_B   0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17059
-			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10059
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17059
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17059
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17059
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17059
-			/* WL_EN */
-			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x17071
-			/* WL_IRQ */
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08  0x17071
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170B9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100B9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170B9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170B9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170B9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170B9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170F9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100F9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170F9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170F9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170F9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170F9
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK	0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0	0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1	0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2	0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-		>;
-	};
-};
-
-&pcie {
-	fsl,tx-swing-full = <103>;
-	fsl,tx-swing-low = <103>;
-	reset-gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "disabled";
-};
-
-&reg_arm {
-	vin-supply = <&sw1a_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&sw1c_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1c_reg>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt>;
-	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "ti,wl1835-st";
-		enable-gpios = <&gpio6 18 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&usbh1 {
-	status = "disabled";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "disabled";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_wl18xx_vmmc>;
-	non-removable;
-	wakeup-source;
-	keep-power-in-suspend;
-	cap-power-off-card;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "disabled";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi
deleted file mode 100644
index f505f27045305..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2021 Protonic Holland
- */
-
-/ {
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-		autorepeat;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	panel {
-		compatible = "kyo,tcg121xglp";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&rgmii_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ9031RNX PHY */
-		rgmii_phy: ethernet-phy@0 {
-			reg = <0>;
-			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
-			"CAM2_MIRROR", "", "", "SMBALERT",
-		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
-		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
-			"SD1_DATA3", "ETH_MDIO", "",
-		"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
-		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
-			"CAN2_SR", "CAN2_TX", "CAN2_RX",
-		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
-			"HITCH_IN_OUT",
-		"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",
-			"ISB_LED";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
-			"I2S_BITCLK", "I2S_DOUT",
-		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
-			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
-			"ITU656_D6", "ITU656_D7", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
-			"RGMII_TD3",
-		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
-			"RGMII_RD2", "RGMII_RD3", "", "";
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030
-			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030
-			/* Phy reset */
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1
-		>;
-	};
-
-	pinctrl_gpiokeys: gpiokeygrp {
-		fsl,pins = <
-			/* nON_SWITCH */
-			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
deleted file mode 100644
index c4e6cf0527ba4..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ /dev/null
@@ -1,697 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2014 Protonic Holland
- * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-
-#include <dt-bindings/display/sdtv-standards.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/media/tvp5150.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	backlight_lcd: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm1 0 5000000 0>;
-		brightness-levels = <0 16 64 255>;
-		num-interpolated-steps = <16>;
-		default-brightness-level = <48>;
-		power-supply = <&reg_3v3>;
-		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
-	};
-
-	backlight_led: backlight-led {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000 0>;
-		brightness-levels = <0 16 64 255>;
-		num-interpolated-steps = <16>;
-		default-brightness-level = <48>;
-		power-supply = <&reg_3v3>;
-	};
-
-	/* only for backwards compatibility with old HW */
-	backlight_isb: backlight-isb {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 5000000 0>;
-		brightness-levels = <0 8 48 255>;
-		num-interpolated-steps = <5>;
-		default-brightness-level = <0>;
-		power-supply = <&reg_3v3>;
-	};
-
-	connector {
-		compatible = "composite-video-connector";
-		label = "Composite0";
-		sdtv-standards = <SDTV_STD_PAL_B>;
-
-		port {
-			comp0_out: endpoint {
-				remote-endpoint = <&tvp5150_comp0_in>;
-			};
-		};
-	};
-
-	counter-0 {
-		compatible = "interrupt-counter";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_counter0>;
-		gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	};
-
-	counter-1 {
-		compatible = "interrupt-counter";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_counter1>;
-		gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-	};
-
-	counter-2 {
-		compatible = "interrupt-counter";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_counter2>;
-		gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-0 {
-			label = "debug0";
-			function = LED_FUNCTION_HEARTBEAT;
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-1 {
-			label = "debug1";
-			function = LED_FUNCTION_DISK;
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "disk-activity";
-		};
-
-		led-2 {
-			label = "power_led";
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led-3 {
-			label = "isb_led";
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	reg_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_otg_vbus: regulator-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "otg-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "prti6q-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Line", "Line In Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "External Speaker";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"External Speaker", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-			system-clock-frequency = <0>; /* Do NOT call fsl_ssi_set_dai_sysclk! */
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			bitclock-master;
-			frame-master;
-		};
-	};
-
-	thermal-zones {
-		chassis-thermal {
-			polling-delay = <20000>;
-			polling-delay-passive = <0>;
-			thermal-sensors = <&tsens0>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	mux-ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		0
-			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TFSDIR	0
-			IMX_AUDMUX_V2_PTCR_TCLKDIR	IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
-	};
-
-	mux-pins3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-			0				IMX_AUDMUX_V2_PDCR_TXRXEN
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	termination-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	termination-ohms = <150>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-	};
-};
-
-&gpio2 {
-	gpio-line-names =
-		"YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "",
-		"", "LED_PWM", "", "", "",
-			"", "", "",
-		"", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH",
-		"POWER_LED", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
-			"CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ",
-		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
-			"YACO_RESET";
-};
-
-&gpio7 {
-	gpio-line-names =
-		"EMMC_DAT5", "EMMC_DAT4", "EMMC_CMD", "EMMC_CLK", "EMMC_DAT0",
-			"EMMC_DAT1", "EMMC_DAT2", "EMMC_DAT3",
-		"EMMC_RST", "", "", "", "CAM_DETECT", "", "", "",
-		"", "EMMC_DAT7", "EMMC_DAT6", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0xa>;
-		#sound-dai-cells = <0>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_3v3>;
-		VDDIO-supply = <&reg_3v3>;
-		VDDD-supply = <&reg_1v8>;
-	};
-
-	video-decoder@5c {
-		compatible = "ti,tvp5150";
-		reg = <0x5c>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			tvp5150_comp0_in: endpoint {
-				remote-endpoint = <&comp0_out>;
-			};
-		};
-
-		/* Output port 2 is video output pad */
-		port@2 {
-			reg = <2>;
-
-			tvp5151_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	adc@49 {
-		compatible = "ti,ads1015";
-		reg = <0x49>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@4 {
-			reg = <4>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@5 {
-			reg = <5>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@6 {
-			reg = <6>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@7 {
-			reg = <7>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsens0: temperature-sensor@70 {
-		compatible = "ti,tmp103";
-		reg = <0x70>;
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-	status = "okay";
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&ssi1 {
-	#sound-dai-cells = <0>;
-	fsl,mode = "ac97-slave";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	disable-wp;
-	cap-sd-highspeed;
-	no-mmc;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	no-sd;
-	no-sdio;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
-		>;
-	};
-
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28		0x1b0b0
-		>;
-	};
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
-			/* CAN1_SR */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
-			/* CAN1_TERM */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
-			/* CAN2_SR */
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
-		>;
-	};
-
-	pinctrl_counter0: counter0grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00			0x1b000
-		>;
-	};
-
-	pinctrl_counter1: counter1grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01			0x1b000
-		>;
-	};
-
-	pinctrl_counter2: counter2grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02			0x1b000
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x100b1
-			/* CS */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x000b1
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			/* ITU656_nRESET */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02			0x1b0b0
-			/* CAM1_MIRROR */
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03			0x130b0
-			/* CAM2_MIRROR */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
-			/* CAM_nDETECT */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
-			/* ISB_IN1 */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
-			/* ISB_nIN2 */
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21			0x1b0b0
-			/* WARN_LIGHT */
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19			0x100b0
-			/* ON2_FB */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b0
-			/* YACO_nIRQ */
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x1b0b0
-			/* YACO_BOOT0 */
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0x130b0
-			/* YACO_nRESET */
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x1b0b0
-			/* FORCE_ON1 */
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
-			/* AUDIO_nRESET */
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21		0x1f0b0
-			/* ITU656_nPDN */
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
-
-			/* New in HW revision 1 */
-			/* ON1_FB */
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
-			/* DIP1_FB */
-			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			/* DEBUG0 */
-			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16		0x1b0b0
-			/* DEBUG1 */
-			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
-			/* POWER_LED */
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
-			/* ISB_LED */
-			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31		0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT			0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT			0x1b0b0
-		>;
-	};
-
-	/* YaCO AUX Uart */
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
-		>;
-	};
-
-	/* YaCO Touchscreen UART */
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
-			/* power enable, high active */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
-			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
-			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
deleted file mode 100644
index e781a45785ed8..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-//
-// Author: Fabio Estevam <fabio.estevam@freescale.com>
-
-#include "imx6qdl-wandboard.dtsi"
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-wandboard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x0f0b0		/* WL_REF_ON */
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x0f0b0		/* WL_RST_N */
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE */
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
-				MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x80000000	/* BT_ON */
-				MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x80000000	/* BT_WAKE */
-				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */
-			>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
deleted file mode 100644
index 3874e74703f09..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-//
-// Author: Fabio Estevam <fabio.estevam@freescale.com>
-
-#include "imx6qdl-wandboard.dtsi"
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-wandboard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x0f0b0		/* WIFI_ON (reset, active low) */
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON (unused) */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE, input */
-				MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x0f0b0		/* GPIO5_IO31 (Wifi Power Enable) */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE (unused) */
-				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x80000000	/* BT_ON */
-				MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x80000000	/* BT_WAKE */
-				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x80000000	/* BT_HOST_WAKE */
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
-			>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
deleted file mode 100644
index bf86b639fdac3..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ /dev/null
@@ -1,193 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-//
-// Author: Fabio Estevam <fabio.estevam@freescale.com>
-
-#include "imx6qdl-wandboard.dtsi"
-
-/ {
-	reg_eth_phy: regulator-eth-phy {
-		compatible = "regulator-fixed";
-		regulator-name = "ETH_PHY";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio7 13 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&fec {
-	phy-supply = <&reg_eth_phy>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-wandboard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* USDHC1 CD */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29   	0x1f0b1		/* RGMII PHY reset */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
-			>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
deleted file mode 100644
index e4f63423d8eee..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ /dev/null
@@ -1,378 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	sound {
-		compatible = "fsl,imx6-wandboard-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6-wandboard-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-
-	reg_1p5v: regulator-1p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P5V";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	reg_2p8v: regulator-2p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usbotgvbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotgvbus>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c1>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mclk>;
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-		lrclk-strength = <3>;
-	};
-
-	camera@3c {
-		compatible = "ovti,ov5645";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5645>;
-		reg = <0x3c>;
-		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-frequency = <24000000>;
-		vdddo-supply = <&reg_1p8v>;
-		vdda-supply = <&reg_2p8v>;
-		vddd-supply = <&reg_1p5v>;
-		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
-
-		port {
-			ov5645_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	imx6qdl-wandboard {
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c1_gpio: i2c1gpiogrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b0
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2_gpio: i2c2gpiogrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b0
-				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b0
-			>;
-		};
-
-		pinctrl_mclk: mclkgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
-			>;
-		};
-
-		pinctrl_ov5645: ov5645grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0
-				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD0__SPDIF_OUT		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usbotgvbus: usbotgvbusgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@1 {
-			reg = <1>;
-			qca,clk-out-frequency = <125000000>;
-		};
-	};
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5645_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
deleted file mode 100644
index 5bb47c79a4da2..0000000000000
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ /dev/null
@@ -1,1142 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2016-2017 Zodiac Inflight Innovations
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio1;
-		rtc0 = &ds1341;
-	};
-
-	mdio1: mdio {
-		compatible = "virtual,mdio-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mdio1>;
-		gpios = <&gpio6 5 GPIO_ACTIVE_HIGH
-		         &gpio6 4 GPIO_ACTIVE_HIGH>;
-
-		phy: ethernet-phy@0 {
-			pinctrl-0 = <&pinctrl_rmii_phy_irq>;
-			pinctrl-names = "default";
-			reg = <0>;
-			interrupt-parent = <&gpio3>;
-			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
-
-	reg_28p0v: regulator-28p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "28V_IN";
-		regulator-min-microvolt = <28000000>;
-		regulator-max-microvolt = <28000000>;
-		regulator-always-on;
-	};
-
-	reg_12p0v: regulator-12p0v {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_28p0v>;
-		regulator-name = "12V_MAIN";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v_main: regulator-5p0v-main {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_12p0v>;
-		regulator-name = "5V_MAIN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v_pmic: regulator-3p3v-pmic {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_12p0v>;
-		regulator-name = "PMIC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_3p3v_pmic>;
-		regulator-name = "GEN_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v_sd: regulator-3p3v-sd {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_3p3v_sd>;
-		vin-supply = <&reg_3p3v>;
-		regulator-name = "3V3_SD";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <1000>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_3p3v_display: regulator-3p3v-display {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_12p0v>;
-		regulator-name = "3V3_DISPLAY";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v_ssd: regulator-3p3v-ssd {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_12p0v>;
-		regulator-name = "3V3_SSD";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	sound1 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "front";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound1_codec>;
-		simple-audio-card,frame-master = <&sound1_codec>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPA1 HPLEFT",
-			"Headphone Jack", "HPA1 HPRIGHT",
-			"HPA1 LEFTIN", "HPL",
-			"HPA1 RIGHTIN", "HPR";
-		simple-audio-card,aux-devs = <&hpa1>;
-
-		sound1_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi2>;
-		};
-
-		sound1_codec: simple-audio-card,codec {
-			sound-dai = <&codec1>;
-			clocks = <&cs2000>;
-		};
-	};
-
-	sound2 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "periph";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound2_codec>;
-		simple-audio-card,frame-master = <&sound2_codec>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPA1 HPLEFT",
-			"Headphone Jack", "HPA1 HPRIGHT",
-			"HPA1 LEFTIN", "HPL",
-			"HPA1 RIGHTIN", "HPR";
-		simple-audio-card,aux-devs = <&hpa2>;
-
-		sound2_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		sound2_codec: simple-audio-card,codec {
-			sound-dai = <&codec2>;
-			clocks = <&cs2000>;
-		};
-	};
-
-	panel {
-		power-supply = <&reg_3p3v_display>;
-		backlight = <&sp_backlight>;
-		status = "disabled";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	disp0: disp0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0>;
-		status = "disabled";
-
-		port@0 {
-			reg = <0>;
-
-			disp0_in_0: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			disp0_out: endpoint {
-				remote-endpoint = <&tc358767_in>;
-			};
-		};
-	};
-
-	cs2000_ref: cs2000-ref {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	cs2000_in_dummy: cs2000-in-dummy {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	edp_refclk: edp-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <19200000>;
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-	                         <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
-};
-
-&cpu0 {
-	fsl,soc-operating-points = <
-		/* ARM kHz  SOC-PU uV */
-		1200000 1300000
-		996000	1275000
-		852000	1275000
-		792000	1200000
-		396000	1200000
-	>;
-};
-
-&reg_arm {
-	vin-supply = <&sw1a_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&sw1c_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1c_reg>;
-};
-
-&ldb {
-	lvds-channel@0 {
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-
-	mcu {
-		compatible = "zii,rave-sp-rdu2";
-		current-speed = <1000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		watchdog {
-			compatible = "zii,rave-sp-watchdog";
-		};
-
-		sp_backlight: backlight {
-			compatible = "zii,rave-sp-backlight";
-		};
-
-		pwrbutton {
-			compatible = "zii,rave-sp-pwrbutton";
-		};
-
-		eeprom@a3 {
-			compatible = "zii,rave-sp-eeprom";
-			reg = <0xa3 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			zii,eeprom-name = "dds-eeprom";
-		};
-
-		eeprom@a4 {
-			compatible = "zii,rave-sp-eeprom";
-			reg = <0xa4 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			zii,eeprom-name = "main-eeprom";
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "st,m25p128", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&gpio3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio3_hog>;
-
-	usb-emulation-hog {
-		gpio-hog;
-		gpios = <19 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "usb-emulation";
-	};
-
-	usb-mode1-hog {
-		gpio-hog;
-		gpios = <20 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-mode1";
-	};
-
-	usb-pwr-hog {
-		gpio-hog;
-		gpios = <22 GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "usb-pwr-ctrl-en-n";
-	};
-
-	usb-mode2-hog {
-		gpio-hog;
-		gpios = <23 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-mode2";
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	codec2: codec@18 {
-		compatible = "ti,tlv320dac3100";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec2>;
-		reg = <0x18>;
-		#sound-dai-cells = <0>;
-		HPVDD-supply = <&reg_3p3v>;
-		SPRVDD-supply = <&reg_3p3v>;
-		SPLVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_3p3v>;
-		IOVDD-supply = <&reg_3p3v>;
-		DVDD-supply = <&vgen4_reg>;
-		reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-	};
-
-	accel@1c {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_accel>;
-		compatible = "fsl,mma8451";
-		reg = <0x1c>;
-		interrupt-parent = <&gpio1>;
-		interrupt-names = "INT2";
-		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&reg_3p3v>;
-		vddio-supply = <&reg_3p3v>;
-	};
-
-	hpa2: amp@60 {
-		compatible = "ti,tpa6130a2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tpa2>;
-		reg = <0x60>;
-		power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		Vdd-supply = <&reg_5p0v_main>;
-		sound-name-prefix = "HPA1";
-	};
-
-	edp-bridge@68 {
-		compatible = "toshiba,tc358767";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tc358767>;
-		reg = <0x68>;
-		shutdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		clock-names = "ref";
-		clocks = <&edp_refclk>;
-		status = "disabled";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				tc358767_in: endpoint {
-					remote-endpoint = <&disp0_out>;
-				};
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pmic@8 {
-		compatible = "fsl,pfuze100";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pfuze100_irq>;
-		reg = <0x08>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	watchdog@38 {
-		compatible = "zii,rave-wdt";
-		reg = <0x38>;
-	};
-
-	temp-sense@48 {
-		compatible = "national,lm75";
-		reg = <0x48>;
-	};
-
-	cs2000: clkgen@4e {
-		compatible = "cirrus,cs2000-cp";
-		reg = <0x4e>;
-		#clock-cells = <0>;
-		clock-names = "clk_in", "ref_clk";
-		clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
-		assigned-clocks = <&cs2000>;
-		assigned-clock-rates = <24000000>;
-	};
-
-	eeprom@54 {
-		compatible = "atmel,24c128";
-		reg = <0x54>;
-	};
-
-	ds1341: rtc@68 {
-		compatible = "dallas,ds1341";
-		reg = <0x68>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	codec1: codec@18 {
-		compatible = "ti,tlv320dac3100";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec1>;
-		reg = <0x18>;
-		#sound-dai-cells = <0>;
-		HPVDD-supply = <&reg_3p3v>;
-		SPRVDD-supply = <&reg_3p3v>;
-		SPLVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_3p3v>;
-		IOVDD-supply = <&reg_3p3v>;
-		DVDD-supply = <&vgen4_reg>;
-		reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@20 {
-		compatible = "syna,rmi4-i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ts>;
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&reg_5p0v_main>;
-		vio-supply = <&reg_3p3v>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <2>;
-		};
-
-		rmi4-f11@11 {
-			reg = <0x11>;
-			touchscreen-inverted-x;
-			touchscreen-swapped-x-y;
-			syna,sensor-type = <1>;
-			syna,delta-x-threshold = <5>;
-			syna,delta-y-threshold = <10>;
-		};
-
-		rmi4-f12@12 {
-			reg = <0x12>;
-			touchscreen-inverted-x;
-			touchscreen-swapped-x-y;
-			syna,sensor-type = <1>;
-		};
-	};
-
-	touchscreen@2a {
-		compatible = "eeti,exc3000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ts>;
-		reg = <0x2a>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-		status = "disabled";
-	};
-
-	reg_5p0v_user_usb: charger@32 {
-		compatible = "microchip,ucs1002";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ucs1002_pins>;
-		reg = <0x32>;
-		interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
-		                      <&gpio3 21 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-names = "a_det", "alert";
-	};
-
-	hpa1: amp@60 {
-		compatible = "ti,tpa6130a2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tpa1>;
-		reg = <0x60>;
-		power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		Vdd-supply = <&reg_5p0v_main>;
-		sound-name-prefix = "HPA1";
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&disp0_in_0>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	host@0 {
-		reg = <0 0 0 0 0>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		i210: i210@0 {
-			reg = <0 0 0 0 0>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	vmmc-supply = <&reg_3p3v_sd>;
-	vqmmc-supply = <&reg_3p3v>;
-	no-1-8-v;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	vmmc-supply = <&reg_3p3v_sd>;
-	vqmmc-supply = <&reg_3p3v>;
-	no-1-8-v;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
-	no-1-8-v;
-	non-removable;
-	no-sdio;
-	no-sd;
-	status = "okay";
-};
-
-&sata {
-	target-supply = <&reg_3p3v_ssd>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-handle = <&phy>;
-	phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <100>;
-	phy-supply = <&reg_3p3v>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-frequency = <12500000>;
-		suppress-preamble;
-		status = "okay";
-
-		switch: switch@0 {
-			compatible = "marvell,mv88e6085";
-			pinctrl-0 = <&pinctrl_switch_irq>;
-			pinctrl-names = "default";
-			reg = <0>;
-			dsa,member = <0 0>;
-			eeprom-length = <512>;
-			interrupt-parent = <&gpio6>;
-			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "gigabit_proc";
-					phy-handle = <&switchphy0>;
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "netaux";
-					phy-handle = <&switchphy1>;
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "cpu";
-					ethernet = <&fec>;
-
-					fixed-link {
-						speed = <100>;
-						full-duplex;
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "netright";
-					phy-handle = <&switchphy3>;
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "netleft";
-					phy-handle = <&switchphy4>;
-				};
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switchphy0: switchphy@0 {
-					reg = <0>;
-					interrupt-parent = <&switch>;
-					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				switchphy1: switchphy@1 {
-					reg = <1>;
-					interrupt-parent = <&switch>;
-					interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				switchphy2: switchphy@2 {
-					reg = <2>;
-					interrupt-parent = <&switch>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				switchphy3: switchphy@3 {
-					reg = <3>;
-					interrupt-parent = <&switch>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				switchphy4: switchphy@4 {
-					reg = <4>;
-					interrupt-parent = <&switch>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-		};
-	};
-};
-
-&usbh1 {
-	vbus-supply = <&reg_5p0v_main>;
-	disable-over-current;
-	maximum-speed = "full-speed";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_5p0v_user_usb>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&snvs_rtc {
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			 IMX_AUDMUX_V2_PTCR_TFSEL(2) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(2) |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
-	};
-
-	aud3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-		>;
-	};
-
-	ssi2 {
-		fsl,audmux-port = <1>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
-		>;
-	};
-
-	aud5 {
-		fsl,audmux-port = <4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
-		>;
-	};
-};
-
-&iomuxc {
-	pinctrl_accel: accelgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x4001b000
-		>;
-	};
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
-			MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x130b0
-			MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-		>;
-	};
-
-	pinctrl_codec1: dac1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x40000038
-		>;
-	};
-
-	pinctrl_codec2: dac2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x40000038
-		>;
-	};
-
-	pinctrl_disp0: disp0grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f9
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x100f9
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x100f9
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x100f9
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x100f9
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x100f9
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x100f9
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x100f9
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x100f9
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x100f9
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x100f9
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x100f9
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x100f9
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x100f9
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x100f9
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x100f9
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x100f9
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x100f9
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x100f9
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x100f9
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x100f9
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x100f9
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x100f9
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x100f9
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x100f9
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x100f9
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x100f9
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x100f9
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x000b1
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b1
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x100f5
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x100f5
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x100c0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x100c0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x100f5
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x100f5
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x40010040
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x100b0
-			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio3_hog: gpio3hoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b811
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b811
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b811
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b811
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b811
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b811
-		>;
-	};
-
-	pinctrl_mdio1: bitbangmdiogrp {
-		fsl,pins = <
-			/* Bitbang MDIO for DEB Switch */
-			MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x4001b030
-			MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40018830
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x10038
-		>;
-	};
-
-	pinctrl_pfuze100_irq: pfuze100grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x40010000
-		>;
-	};
-
-	pinctrl_reg_3p3v_sd: mmcsupply1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x858
-		>;
-	};
-
-	pinctrl_rmii_phy_irq: phygrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x40010000
-		>;
-	};
-
-	pinctrl_switch_irq: switchgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x4001b000
-		>;
-	};
-
-	pinctrl_tc358767: tc358767grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x10
-		>;
-	};
-
-	pinctrl_tpa1: tpa6130-1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x40000038
-		>;
-	};
-
-	pinctrl_tpa2: tpa6130-2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x40000038
-		>;
-	};
-
-	pinctrl_ts: tsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_ucs1002_pins: ucs1002grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02  	0x1b0b0
-			MX6QDL_PAD_EIM_D21__GPIO3_IO21  	0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x10059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10069
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x40010040
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x10059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10069
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x40010040
-
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x1b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
deleted file mode 100644
index b72ec745f6d12..0000000000000
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ /dev/null
@@ -1,1393 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		ethernet0 = &fec;
-		can0 = &can1;
-		can1 = &can2;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		ipu0 = &ipu1;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		mmc3 = &usdhc4;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &ecspi3;
-		spi3 = &ecspi4;
-		usb0 = &usbotg;
-		usb1 = &usbh1;
-		usb2 = &usbh2;
-		usb3 = &usbh3;
-		usbphy0 = &usbphy1;
-		usbphy1 = &usbphy2;
-	};
-
-	clocks {
-		ckil {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-
-		ckih1 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		osc {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	ldb: ldb {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
-		gpr = <&gpr>;
-		status = "disabled";
-
-		lvds-channel@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			status = "disabled";
-
-			port@0 {
-				reg = <0>;
-
-				lvds0_mux_0: endpoint {
-					remote-endpoint = <&ipu1_di0_lvds0>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds0_mux_1: endpoint {
-					remote-endpoint = <&ipu1_di1_lvds0>;
-				};
-			};
-		};
-
-		lvds-channel@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			status = "disabled";
-
-			port@0 {
-				reg = <0>;
-
-				lvds1_mux_0: endpoint {
-					remote-endpoint = <&ipu1_di0_lvds1>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds1_mux_1: endpoint {
-					remote-endpoint = <&ipu1_di1_lvds1>;
-				};
-			};
-		};
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&gpc>;
-		interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	usbphynop1: usbphynop1 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	usbphynop2: usbphynop2 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gpc>;
-		ranges;
-
-		dma_apbh: dma-apbh@110000 {
-			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
-			reg = <0x00110000 0x2000>;
-			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			dma-channels = <4>;
-			clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
-		};
-
-		gpmi: nand-controller@112000 {
-			compatible = "fsl,imx6q-gpmi-nand";
-			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
-			reg-names = "gpmi-nand", "bch";
-			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "bch";
-			clocks = <&clks IMX6QDL_CLK_GPMI_IO>,
-				 <&clks IMX6QDL_CLK_GPMI_APB>,
-				 <&clks IMX6QDL_CLK_GPMI_BCH>,
-				 <&clks IMX6QDL_CLK_GPMI_BCH_APB>,
-				 <&clks IMX6QDL_CLK_PER1_BCH>;
-			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
-				      "gpmi_bch_apb", "per1_bch";
-			dmas = <&dma_apbh 0>;
-			dma-names = "rx-tx";
-			status = "disabled";
-		};
-
-		hdmi: hdmi@120000 {
-			reg = <0x00120000 0x9000>;
-			interrupts = <0 115 0x04>;
-			gpr = <&gpr>;
-			clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
-				 <&clks IMX6QDL_CLK_HDMI_ISFR>;
-			clock-names = "iahb", "isfr";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					hdmi_mux_0: endpoint {
-						remote-endpoint = <&ipu1_di0_hdmi>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					hdmi_mux_1: endpoint {
-						remote-endpoint = <&ipu1_di1_hdmi>;
-					};
-				};
-			};
-		};
-
-		gpu_3d: gpu@130000 {
-			compatible = "vivante,gc";
-			reg = <0x00130000 0x4000>;
-			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
-				 <&clks IMX6QDL_CLK_GPU3D_CORE>,
-				 <&clks IMX6QDL_CLK_GPU3D_SHADER>;
-			clock-names = "bus", "core", "shader";
-			power-domains = <&pd_pu>;
-			#cooling-cells = <2>;
-		};
-
-		gpu_2d: gpu@134000 {
-			compatible = "vivante,gc";
-			reg = <0x00134000 0x4000>;
-			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
-				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
-			clock-names = "bus", "core";
-			power-domains = <&pd_pu>;
-			#cooling-cells = <2>;
-		};
-
-		timer@a00600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x00a00600 0x20>;
-			interrupts = <1 13 0xf01>;
-			interrupt-parent = <&intc>;
-			clocks = <&clks IMX6QDL_CLK_TWD>;
-		};
-
-		intc: interrupt-controller@a01000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x00a01000 0x1000>,
-			      <0x00a00100 0x100>;
-			interrupt-parent = <&intc>;
-		};
-
-		L2: cache-controller@a02000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x00a02000 0x1000>;
-			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
-			cache-unified;
-			cache-level = <2>;
-			arm,tag-latency = <4 2 3>;
-			arm,data-latency = <4 2 3>;
-			arm,shared-override;
-		};
-
-		pcie: pcie@1ffc000 {
-			compatible = "fsl,imx6q-pcie";
-			reg = <0x01ffc000 0x04000>,
-			      <0x01f00000 0x80000>;
-			reg-names = "dbi", "config";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			bus-range = <0x00 0xff>;
-			ranges = <0x81000000 0 0          0x01f80000 0 0x00010000>, /* downstream I/O */
-				 <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
-			num-lanes = <1>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
-				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
-				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
-			clock-names = "pcie", "pcie_bus", "pcie_phy";
-			status = "disabled";
-		};
-
-		aips1: bus@2000000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02000000 0x100000>;
-			ranges;
-
-			spba-bus@2000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x02000000 0x40000>;
-				ranges;
-
-				spdif: spdif@2004000 {
-					compatible = "fsl,imx35-spdif";
-					reg = <0x02004000 0x4000>;
-					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 14 18 0>,
-					       <&sdma 15 18 0>;
-					dma-names = "rx", "tx";
-					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
-						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
-						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
-						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
-						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
-					clock-names = "core",  "rxtx0",
-						      "rxtx1", "rxtx2",
-						      "rxtx3", "rxtx4",
-						      "rxtx5", "rxtx6",
-						      "rxtx7", "spba";
-					status = "disabled";
-				};
-
-				ecspi1: spi@2008000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02008000 0x4000>;
-					interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
-						 <&clks IMX6QDL_CLK_ECSPI1>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				ecspi2: spi@200c000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x0200c000 0x4000>;
-					interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
-						 <&clks IMX6QDL_CLK_ECSPI2>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				ecspi3: spi@2010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02010000 0x4000>;
-					interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
-						 <&clks IMX6QDL_CLK_ECSPI3>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				ecspi4: spi@2014000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02014000 0x4000>;
-					interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
-						 <&clks IMX6QDL_CLK_ECSPI4>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				uart1: serial@2020000 {
-					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-					reg = <0x02020000 0x4000>;
-					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_UART_IPG>,
-						 <&clks IMX6QDL_CLK_UART_SERIAL>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				esai: esai@2024000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx35-esai";
-					reg = <0x02024000 0x4000>;
-					interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
-						 <&clks IMX6QDL_CLK_ESAI_MEM>,
-						 <&clks IMX6QDL_CLK_ESAI_EXTAL>,
-						 <&clks IMX6QDL_CLK_ESAI_IPG>,
-						 <&clks IMX6QDL_CLK_SPBA>;
-					clock-names = "core", "mem", "extal", "fsys", "spba";
-					dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				ssi1: ssi@2028000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6q-ssi",
-							"fsl,imx51-ssi";
-					reg = <0x02028000 0x4000>;
-					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_SSI1_IPG>,
-						 <&clks IMX6QDL_CLK_SSI1>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 37 1 0>,
-					       <&sdma 38 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				ssi2: ssi@202c000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6q-ssi",
-							"fsl,imx51-ssi";
-					reg = <0x0202c000 0x4000>;
-					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
-						 <&clks IMX6QDL_CLK_SSI2>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 41 1 0>,
-					       <&sdma 42 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				ssi3: ssi@2030000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6q-ssi",
-							"fsl,imx51-ssi";
-					reg = <0x02030000 0x4000>;
-					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_SSI3_IPG>,
-						 <&clks IMX6QDL_CLK_SSI3>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 45 1 0>,
-					       <&sdma 46 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				asrc: asrc@2034000 {
-					compatible = "fsl,imx53-asrc";
-					reg = <0x02034000 0x4000>;
-					interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
-						<&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
-						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-						<&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
-						<&clks IMX6QDL_CLK_SPBA>;
-					clock-names = "mem", "ipg", "asrck_0",
-						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
-						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
-						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
-						"asrck_d", "asrck_e", "asrck_f", "spba";
-					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
-						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
-					dma-names = "rxa", "rxb", "rxc",
-							"txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
-					fsl,asrc-width = <16>;
-					status = "okay";
-				};
-
-				spba-bus@203c000 {
-					reg = <0x0203c000 0x4000>;
-				};
-			};
-
-			vpu: vpu@2040000 {
-				compatible = "cnm,coda960";
-				reg = <0x02040000 0x3c000>;
-				interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 3 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "bit", "jpeg";
-				clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
-					 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
-				clock-names = "per", "ahb";
-				power-domains = <&pd_pu>;
-				resets = <&src 1>;
-				iram = <&ocram>;
-			};
-
-			aipstz@207c000 { /* AIPSTZ1 */
-				reg = <0x0207c000 0x4000>;
-			};
-
-			pwm1: pwm@2080000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x02080000 0x4000>;
-				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_IPG>,
-					 <&clks IMX6QDL_CLK_PWM1>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			pwm2: pwm@2084000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x02084000 0x4000>;
-				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_IPG>,
-					 <&clks IMX6QDL_CLK_PWM2>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			pwm3: pwm@2088000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x02088000 0x4000>;
-				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_IPG>,
-					 <&clks IMX6QDL_CLK_PWM3>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			pwm4: pwm@208c000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x0208c000 0x4000>;
-				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_IPG>,
-					 <&clks IMX6QDL_CLK_PWM4>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			can1: can@2090000 {
-				compatible = "fsl,imx6q-flexcan";
-				reg = <0x02090000 0x4000>;
-				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_CAN1_IPG>,
-					 <&clks IMX6QDL_CLK_CAN1_SERIAL>;
-				clock-names = "ipg", "per";
-				fsl,stop-mode = <&gpr 0x34 28>;
-				status = "disabled";
-			};
-
-			can2: can@2094000 {
-				compatible = "fsl,imx6q-flexcan";
-				reg = <0x02094000 0x4000>;
-				interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_CAN2_IPG>,
-					 <&clks IMX6QDL_CLK_CAN2_SERIAL>;
-				clock-names = "ipg", "per";
-				fsl,stop-mode = <&gpr 0x34 29>;
-				status = "disabled";
-			};
-
-			gpt: timer@2098000 {
-				compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
-				reg = <0x02098000 0x4000>;
-				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_GPT_IPG>,
-					 <&clks IMX6QDL_CLK_GPT_IPG_PER>,
-					 <&clks IMX6QDL_CLK_GPT_3M>;
-				clock-names = "ipg", "per", "osc_per";
-			};
-
-			gpio1: gpio@209c000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x0209c000 0x4000>;
-				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 67 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@20a0000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020a0000 0x4000>;
-				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 69 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@20a4000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020a4000 0x4000>;
-				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@20a8000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020a8000 0x4000>;
-				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio5: gpio@20ac000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020ac000 0x4000>;
-				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio6: gpio@20b0000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020b0000 0x4000>;
-				interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 77 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio7: gpio@20b4000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020b4000 0x4000>;
-				interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 79 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			kpp: keypad@20b8000 {
-				compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
-				reg = <0x020b8000 0x4000>;
-				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_IPG>;
-				status = "disabled";
-			};
-
-			wdog1: watchdog@20bc000 {
-				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
-				reg = <0x020bc000 0x4000>;
-				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_IPG>;
-			};
-
-			wdog2: watchdog@20c0000 {
-				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
-				reg = <0x020c0000 0x4000>;
-				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_IPG>;
-				status = "disabled";
-			};
-
-			clks: clock-controller@20c4000 {
-				compatible = "fsl,imx6q-ccm";
-				reg = <0x020c4000 0x4000>;
-				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 88 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-			};
-
-			anatop: anatop@20c8000 {
-				compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd";
-				reg = <0x020c8000 0x1000>;
-				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
-
-				reg_vdd1p1: regulator-1p1 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p1";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x110>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <4>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1375000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_vdd3p0: regulator-3p0 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x120>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2625000>;
-					anatop-max-voltage = <3400000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_vdd2p5: regulator-2p5 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd2p5";
-					regulator-min-microvolt = <2250000>;
-					regulator-max-microvolt = <2750000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x130>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2100000>;
-					anatop-max-voltage = <2875000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_arm: regulator-vddcore {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddarm";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <0>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <24>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				reg_pu: regulator-vddpu {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddpu";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-enable-ramp-delay = <380>;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <9>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <26>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				reg_soc: regulator-vddsoc {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddsoc";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <18>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <28>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				tempmon: tempmon {
-					compatible = "fsl,imx6q-tempmon";
-					interrupt-parent = <&gpc>;
-					interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
-					fsl,tempmon = <&anatop>;
-					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-					nvmem-cell-names = "calib", "temp_grade";
-					clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-					#thermal-sensor-cells = <0>;
-				};
-			};
-
-			usbphy1: usbphy@20c9000 {
-				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020c9000 0x1000>;
-				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_USBPHY1>;
-				fsl,anatop = <&anatop>;
-			};
-
-			usbphy2: usbphy@20ca000 {
-				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020ca000 0x1000>;
-				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_USBPHY2>;
-				fsl,anatop = <&anatop>;
-			};
-
-			snvs: snvs@20cc000 {
-				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-				reg = <0x020cc000 0x4000>;
-
-				snvs_rtc: snvs-rtc-lp {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap = <&snvs>;
-					offset = <0x34>;
-					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
-						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				snvs_poweroff: snvs-poweroff {
-					compatible = "syscon-poweroff";
-					regmap = <&snvs>;
-					offset = <0x38>;
-					value = <0x60>;
-					mask = <0x60>;
-					status = "disabled";
-				};
-
-				snvs_pwrkey: snvs-powerkey {
-					compatible = "fsl,sec-v4.0-pwrkey";
-					regmap = <&snvs>;
-					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-					linux,keycode = <KEY_POWER>;
-					wakeup-source;
-					status = "disabled";
-				};
-
-				snvs_lpgpr: snvs-lpgpr {
-					compatible = "fsl,imx6q-snvs-lpgpr";
-				};
-			};
-
-			epit1: epit@20d0000 { /* EPIT1 */
-				reg = <0x020d0000 0x4000>;
-				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			epit2: epit@20d4000 { /* EPIT2 */
-				reg = <0x020d4000 0x4000>;
-				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			src: reset-controller@20d8000 {
-				compatible = "fsl,imx6q-src", "fsl,imx51-src";
-				reg = <0x020d8000 0x4000>;
-				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 96 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
-			};
-
-			gpc: gpc@20dc000 {
-				compatible = "fsl,imx6q-gpc";
-				reg = <0x020dc000 0x4000>;
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-parent = <&intc>;
-				clocks = <&clks IMX6QDL_CLK_IPG>;
-				clock-names = "ipg";
-
-				pgc {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					power-domain@0 {
-						reg = <0>;
-						#power-domain-cells = <0>;
-					};
-					pd_pu: power-domain@1 {
-						reg = <1>;
-						#power-domain-cells = <0>;
-						power-supply = <&reg_pu>;
-						clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
-						         <&clks IMX6QDL_CLK_GPU3D_SHADER>,
-						         <&clks IMX6QDL_CLK_GPU2D_CORE>,
-						         <&clks IMX6QDL_CLK_GPU2D_AXI>,
-						         <&clks IMX6QDL_CLK_OPENVG_AXI>,
-						         <&clks IMX6QDL_CLK_VPU_AXI>;
-					};
-				};
-			};
-
-			gpr: iomuxc-gpr@20e0000 {
-				compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
-				reg = <0x20e0000 0x38>;
-
-				mux: mux-controller {
-					compatible = "mmio-mux";
-					#mux-control-cells = <1>;
-				};
-			};
-
-			iomuxc: pinctrl@20e0000 {
-				compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
-				reg = <0x20e0000 0x4000>;
-			};
-
-			dcic1: dcic@20e4000 {
-				reg = <0x020e4000 0x4000>;
-				interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			dcic2: dcic@20e8000 {
-				reg = <0x020e8000 0x4000>;
-				interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			sdma: dma-controller@20ec000 {
-				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
-				reg = <0x020ec000 0x4000>;
-				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_IPG>,
-					 <&clks IMX6QDL_CLK_SDMA>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
-			};
-		};
-
-		aips2: bus@2100000 { /* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02100000 0x100000>;
-			ranges;
-
-			crypto: crypto@2100000 {
-				compatible = "fsl,sec-v4.0";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x2100000 0x10000>;
-				ranges = <0 0x2100000 0x10000>;
-				clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
-					 <&clks IMX6QDL_CLK_CAAM_ACLK>,
-					 <&clks IMX6QDL_CLK_CAAM_IPG>,
-					 <&clks IMX6QDL_CLK_EIM_SLOW>;
-				clock-names = "mem", "aclk", "ipg", "emi_slow";
-
-				sec_jr0: jr@1000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x1000 0x1000>;
-					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				sec_jr1: jr@2000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x2000 0x1000>;
-					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-
-			aipstz@217c000 { /* AIPSTZ2 */
-				reg = <0x0217c000 0x4000>;
-			};
-
-			usbotg: usb@2184000 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184000 0x200>;
-				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy1>;
-				fsl,usbmisc = <&usbmisc 0>;
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbh1: usb@2184200 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184200 0x200>;
-				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy2>;
-				fsl,usbmisc = <&usbmisc 1>;
-				dr_mode = "host";
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbh2: usb@2184400 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184400 0x200>;
-				interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_USBOH3>;
-				fsl,usbphy = <&usbphynop1>;
-				phy_type = "hsic";
-				fsl,usbmisc = <&usbmisc 2>;
-				dr_mode = "host";
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbh3: usb@2184600 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184600 0x200>;
-				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_USBOH3>;
-				fsl,usbphy = <&usbphynop2>;
-				phy_type = "hsic";
-				fsl,usbmisc = <&usbmisc 3>;
-				dr_mode = "host";
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@2184800 {
-				#index-cells = <1>;
-				compatible = "fsl,imx6q-usbmisc";
-				reg = <0x02184800 0x200>;
-				clocks = <&clks IMX6QDL_CLK_USBOH3>;
-			};
-
-			fec: ethernet@2188000 {
-				compatible = "fsl,imx6q-fec";
-				reg = <0x02188000 0x4000>;
-				interrupt-names = "int0", "pps";
-				interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 119 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_ENET>,
-					 <&clks IMX6QDL_CLK_ENET>,
-					 <&clks IMX6QDL_CLK_ENET_REF>,
-					 <&clks IMX6QDL_CLK_ENET_REF_SEL>;
-				clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
-				fsl,stop-mode = <&gpr 0x34 27>;
-				nvmem-cells = <&fec_mac_addr>;
-				nvmem-cell-names = "mac-address";
-				status = "disabled";
-			};
-
-			mlb@218c000 {
-				reg = <0x0218c000 0x4000>;
-				interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 117 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 126 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			usdhc1: mmc@2190000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02190000 0x4000>;
-				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_USDHC1>,
-					 <&clks IMX6QDL_CLK_USDHC1>,
-					 <&clks IMX6QDL_CLK_USDHC1>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc2: mmc@2194000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02194000 0x4000>;
-				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_USDHC2>,
-					 <&clks IMX6QDL_CLK_USDHC2>,
-					 <&clks IMX6QDL_CLK_USDHC2>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc3: mmc@2198000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02198000 0x4000>;
-				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_USDHC3>,
-					 <&clks IMX6QDL_CLK_USDHC3>,
-					 <&clks IMX6QDL_CLK_USDHC3>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc4: mmc@219c000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x0219c000 0x4000>;
-				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_USDHC4>,
-					 <&clks IMX6QDL_CLK_USDHC4>,
-					 <&clks IMX6QDL_CLK_USDHC4>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@21a0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
-				reg = <0x021a0000 0x4000>;
-				interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_I2C1>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@21a4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
-				reg = <0x021a4000 0x4000>;
-				interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_I2C2>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@21a8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
-				reg = <0x021a8000 0x4000>;
-				interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_I2C3>;
-				status = "disabled";
-			};
-
-			romcp@21ac000 {
-				reg = <0x021ac000 0x4000>;
-			};
-
-			mmdc0: memory-controller@21b0000 { /* MMDC0 */
-				compatible = "fsl,imx6q-mmdc";
-				reg = <0x021b0000 0x4000>;
-				clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
-			};
-
-			mmdc1: memory-controller@21b4000 { /* MMDC1 */
-				compatible = "fsl,imx6q-mmdc";
-				reg = <0x021b4000 0x4000>;
-				status = "disabled";
-			};
-
-			weim: weim@21b8000 {
-				#address-cells = <2>;
-				#size-cells = <1>;
-				compatible = "fsl,imx6q-weim";
-				reg = <0x021b8000 0x4000>;
-				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
-				fsl,weim-cs-gpr = <&gpr>;
-				status = "disabled";
-			};
-
-			ocotp: efuse@21bc000 {
-				compatible = "fsl,imx6q-ocotp", "syscon";
-				reg = <0x021bc000 0x4000>;
-				clocks = <&clks IMX6QDL_CLK_IIM>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				cpu_speed_grade: speed-grade@10 {
-					reg = <0x10 4>;
-				};
-
-				tempmon_calib: calib@38 {
-					reg = <0x38 4>;
-				};
-
-				tempmon_temp_grade: temp-grade@20 {
-					reg = <0x20 4>;
-				};
-
-				fec_mac_addr: mac-addr@88 {
-					reg = <0x88 6>;
-				};
-			};
-
-			tzasc@21d0000 { /* TZASC1 */
-				reg = <0x021d0000 0x4000>;
-				interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			tzasc@21d4000 { /* TZASC2 */
-				reg = <0x021d4000 0x4000>;
-				interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			audmux: audmux@21d8000 {
-				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
-				reg = <0x021d8000 0x4000>;
-				status = "disabled";
-			};
-
-			mipi_csi: mipi@21dc000 {
-				compatible = "fsl,imx6-mipi-csi2";
-				reg = <0x021dc000 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <0 100 0x04>, <0 101 0x04>;
-				clocks = <&clks IMX6QDL_CLK_HSI_TX>,
-					 <&clks IMX6QDL_CLK_VIDEO_27M>,
-					 <&clks IMX6QDL_CLK_EIM_PODF>;
-				clock-names = "dphy", "ref", "pix";
-				status = "disabled";
-			};
-
-			mipi_dsi: mipi@21e0000 {
-				reg = <0x021e0000 0x4000>;
-				status = "disabled";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						mipi_mux_0: endpoint {
-							remote-endpoint = <&ipu1_di0_mipi>;
-						};
-					};
-
-					port@1 {
-						reg = <1>;
-
-						mipi_mux_1: endpoint {
-							remote-endpoint = <&ipu1_di1_mipi>;
-						};
-					};
-				};
-			};
-
-			vdoa@21e4000 {
-				compatible = "fsl,imx6q-vdoa";
-				reg = <0x021e4000 0x4000>;
-				interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_VDOA>;
-			};
-
-			uart2: serial@21e8000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021e8000 0x4000>;
-				interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
-					 <&clks IMX6QDL_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			uart3: serial@21ec000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021ec000 0x4000>;
-				interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
-					 <&clks IMX6QDL_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			uart4: serial@21f0000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f0000 0x4000>;
-				interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
-					 <&clks IMX6QDL_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			uart5: serial@21f4000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f4000 0x4000>;
-				interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
-					 <&clks IMX6QDL_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-		};
-
-		ipu1: ipu@2400000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,imx6q-ipu";
-			reg = <0x02400000 0x400000>;
-			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 5 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6QDL_CLK_IPU1>,
-				 <&clks IMX6QDL_CLK_IPU1_DI0>,
-				 <&clks IMX6QDL_CLK_IPU1_DI1>;
-			clock-names = "bus", "di0", "di1";
-			resets = <&src 2>;
-
-			ipu1_csi0: port@0 {
-				reg = <0>;
-
-				ipu1_csi0_from_ipu1_csi0_mux: endpoint {
-					remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>;
-				};
-			};
-
-			ipu1_csi1: port@1 {
-				reg = <1>;
-			};
-
-			ipu1_di0: port@2 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <2>;
-
-				ipu1_di0_disp0: endpoint@0 {
-					reg = <0>;
-				};
-
-				ipu1_di0_hdmi: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&hdmi_mux_0>;
-				};
-
-				ipu1_di0_mipi: endpoint@2 {
-					reg = <2>;
-					remote-endpoint = <&mipi_mux_0>;
-				};
-
-				ipu1_di0_lvds0: endpoint@3 {
-					reg = <3>;
-					remote-endpoint = <&lvds0_mux_0>;
-				};
-
-				ipu1_di0_lvds1: endpoint@4 {
-					reg = <4>;
-					remote-endpoint = <&lvds1_mux_0>;
-				};
-			};
-
-			ipu1_di1: port@3 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <3>;
-
-				ipu1_di1_disp1: endpoint@0 {
-					reg = <0>;
-				};
-
-				ipu1_di1_hdmi: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&hdmi_mux_1>;
-				};
-
-				ipu1_di1_mipi: endpoint@2 {
-					reg = <2>;
-					remote-endpoint = <&mipi_mux_1>;
-				};
-
-				ipu1_di1_lvds0: endpoint@3 {
-					reg = <3>;
-					remote-endpoint = <&lvds0_mux_1>;
-				};
-
-				ipu1_di1_lvds1: endpoint@4 {
-					reg = <4>;
-					remote-endpoint = <&lvds1_mux_1>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qp-mba6b.dts b/arch/arm/boot/dts/imx6qp-mba6b.dts
deleted file mode 100644
index eee2e09d6e94a..0000000000000
--- a/arch/arm/boot/dts/imx6qp-mba6b.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2015-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6qp-tqma6b.dtsi"
-#include "imx6qdl-mba6.dtsi"
-#include "imx6qdl-mba6b.dtsi"
-#include "imx6q-mba6.dtsi"
-
-/ {
-	model = "TQ TQMa6QP on MBa6x";
-	compatible = "tq,imx6qp-mba6x-b", "tq,mba6b",
-		     "tq,imx6qp-tqma6qp-b", "fsl,imx6qp";
-};
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
deleted file mode 100644
index 741d1ed338ca2..0000000000000
--- a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2016 Boundary Devices, Inc.
- */
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-nitrogen6_max.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX Board";
-	compatible = "boundary,imx6qp-nitrogen6_max", "fsl,imx6qp";
-};
-
-&pcie {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts
deleted file mode 100644
index 1593ac86b2a4c..0000000000000
--- a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2017 Boundary Devices, Inc.
- */
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-nitrogen6_som2.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_SOM2 Board";
-	compatible = "boundary,imx6qp-nitrogen6_som2", "fsl,imx6qp";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
deleted file mode 100644
index a18266598d39f..0000000000000
--- a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 PHYTEC Messtechnik GmbH
- * Author: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
- */
-
-/dts-v1/;
-#include "imx6qp.dtsi"
-#include "imx6qdl-phytec-phycore-som.dtsi"
-#include "imx6qdl-phytec-mira.dtsi"
-#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
-#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
-#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
-
-/ {
-	model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND";
-	compatible = "phytec,imx6qp-pbac06-nand", "phytec,imx6qp-pbac06",
-		     "phytec,imx6qdl-pcm058", "fsl,imx6qp";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
-&can1 {
-	status = "okay";
-};
-
-&fec {
-	status = "okay";
-};
-
-&gpmi {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c_rtc {
-	status = "okay";
-};
-
-&m25p80 {
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
-
-&usdhc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts
deleted file mode 100644
index cf6571cc4682e..0000000000000
--- a/arch/arm/boot/dts/imx6qp-prtwd3.dts
+++ /dev/null
@@ -1,557 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2018 Protonic Holland
- * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6qp.dtsi"
-
-/ {
-	model = "Protonic WD3 board";
-	compatible = "prt,prtwd3", "fsl,imx6qp";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	clock_ksz8081: clock-ksz8081 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-	};
-
-	clock_ksz9031: clock-ksz9031 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	clock_mcp251xfd: clock-mcp251xfd {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <20000000>;
-	};
-
-	clock_sja1105: clock-sja1105 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	mdio {
-		compatible = "virtual,mdio-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mdio>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpios = <&gpio5 6 GPIO_ACTIVE_HIGH
-			 &gpio5 7 GPIO_ACTIVE_HIGH>;
-
-		/* Microchip KSZ8081 */
-		usbeth_phy: ethernet-phy@3 {
-			reg = <0x3>;
-
-			interrupts-extended = <&gpio5 12 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <500>;
-			reset-deassert-us = <1000>;
-			clocks = <&clock_ksz8081>;
-			clock-names = "rmii-ref";
-			micrel,led-mode = <0>;
-		};
-
-		tja1102_phy0: ethernet-phy@4 {
-			reg = <0x4>;
-
-			interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <20>;
-			reset-deassert-us = <2000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			tja1102_phy1: ethernet-phy@5 {
-				reg = <0x5>;
-
-				interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
-			};
-		};
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_otg_vbus: regulator-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "otg-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_npd>;
-		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_5v0>;
-	status = "okay";
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-
-	switch@0 {
-		compatible = "nxp,sja1105q";
-		reg = <0>;
-		spi-max-frequency = <4000000>;
-		spi-rx-delay-us = <1>;
-		spi-tx-delay-us = <1>;
-		spi-cpha;
-
-		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
-
-		clocks = <&clock_sja1105>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "usb";
-				phy-handle = <&usbeth_phy>;
-				phy-mode = "rmii";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "t1slave";
-				phy-handle = <&tja1102_phy1>;
-				phy-mode = "rmii";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "t1master";
-				phy-handle = <&tja1102_phy0>;
-				phy-mode = "rmii";
-
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "rj45";
-				phy-handle = <&rgmii_phy>;
-				phy-mode = "rgmii-id";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "cpu";
-				ethernet = <&fec>;
-				phy-mode = "rgmii-id";
-				rx-internal-delay-ps = <2000>;
-				tx-internal-delay-ps = <2000>;
-
-				fixed-link {
-					speed = <100>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-
-	can@0 {
-		compatible = "microchip,mcp251xfd";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can2>;
-		reg = <0>;
-		clocks = <&clock_mcp251xfd>;
-		spi-max-frequency = <10000000>;
-		interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF>;
-	assigned-clock-rates = <125000000>;
-	status = "okay";
-
-	phy-mode = "rgmii";
-
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ9031 */
-		rgmii_phy: ethernet-phy@2 {
-			reg = <2>;
-
-			interrupts-extended = <&gpio1 28 IRQ_TYPE_EDGE_FALLING>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <1000>;
-
-			clocks = <&clock_ksz9031>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "SD1_CD", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "PHY3_RESET", "", "", "PHY3_INT", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "BOARD_ID3",
-			"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
-		"", "", "", "", "", "", "", "",
-		"", "", "ECSPI2_SS0", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "USB_OTG_OC", "USB_OTG_PWR", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "CAN1_SR", "CAN2_SR", "", "",
-		"", "", "", "", "", "", "", "",
-		"ECSPI3_SS0", "CANFD_INT", "USB_ETH_RESET", "", "", "", "", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "SW_RESET", "", "",
-		"PHY12_INT", "PHY12_RESET", "PHY12_EN", "PHY0_RESET",
-			"PHY0_INT", "", "", "",
-		"", "", "DISP1_EN", "DISP1_LR", "DISP1_TS_IRQ", "LVDS1_PD",
-			"", "",
-		"", "LVDS1_INT", "", "", "DISP0_LR", "DISP0_TS_IRQ",
-			"DISP0_EN", "CAM_GPIO0";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"LVDS0_INT", "LVDS0_PD", "CAM_INT", "CAM_GPIO1", "CAM_PD",
-			"CAM_LOCK", "", "POWER_TG",
-		"POWER_VSEL", "", "WLAN_REG_ON", "USB_ETH_CHG", "", "",
-			"USB_ETH_CHG_ID0", "USB_ETH_CHG_ID1",
-		"USB_ETH_CHG_ID2", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	/* additional i2c devices are added automatically by the boot loader */
-};
-
-&i2c3 {
-	adc@49 {
-		compatible = "ti,ads1015";
-		reg = <0x49>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* VIN */
-		channel@4 {
-			reg = <4>;
-			ti,gain = <1>;
-			ti,datarate = <3>;
-		};
-
-		/* VBUS */
-		channel@5 {
-			reg = <5>;
-			ti,gain = <1>;
-			ti,datarate = <3>;
-		};
-
-		/* ICHG */
-		channel@6 {
-			reg = <6>;
-			ti,gain = <1>;
-			ti,datarate = <3>;
-		};
-
-		channel@7 {
-			reg = <7>;
-			ti,gain = <1>;
-			ti,datarate = <3>;
-		};
-	};
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbphynop1 {
-	status = "disabled";
-};
-
-&usbphynop2 {
-	status = "disabled";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	disable-wp;
-	cap-sd-highspeed;
-	no-mmc;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	no-1-8-v;
-	non-removable;
-	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	brcmf: bcrmf@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	no-sd;
-	no-sdio;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
-			/* CAN1_SR */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			/* CAN2_nINT */
-			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25		0x1b0b1
-			/* CAN2_SR */
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13070
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x100b1
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0x100b1
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x000b1
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK		0x100b1
-			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI		0x100b1
-			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO		0x100b1
-			/* CS */
-			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24		0x000b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030
-
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030
-			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030
-
-			/* Configure clock provider for RGMII ref clock */
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x4001b0b0
-			/* Configure clock consumer for RGMII ref clock */
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030
-
-			/* SJA1105Q switch reset */
-			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05		0x10030
-
-			/* phy3/rgmii_phy reset */
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x10030
-			/* phy3/rgmii_phy int */
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x40010000
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
-		>;
-	};
-
-	pinctrl_mdio: mdiogrp {
-		fsl,pins = <
-			/* phy0/usbeth_phy reset */
-			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11		0x10030
-			/* phy0/usbeth_phy int */
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12		0x100b1
-
-			/* phy12/tja1102_phy0 reset */
-			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09		0x10030
-			/* phy12/tja1102_phy0 int */
-			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08		0x100b1
-			/* phy12/tja1102_phy0 enable. Set 100K pull-up */
-			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10		0x1f030
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD			0x170b9
-			MX6QDL_PAD_SD2_CLK__SD2_CLK			0x100b9
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0			0x170b9
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1			0x170b9
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2			0x170b9
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3			0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
-			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
-			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
-		>;
-	};
-
-	pinctrl_wifi_npd: wifinpd {
-		fsl,pins = <
-			/* WL_REG_ON */
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10		0x13069
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
deleted file mode 100644
index 2bb3bfb18ec3e..0000000000000
--- a/arch/arm/boot/dts/imx6qp-sabreauto.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2016 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-sabreauto.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
-	compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
-};
-
-&i2c2 {
-	max7322: gpio@68 {
-		compatible = "maxim,max7322";
-		reg = <0x68>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&iomuxc {
-	imx6qdl-sabreauto {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ENET_MDIO          0x1b0b0
-				MX6QDL_PAD_KEY_COL2__ENET_MDC           0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b018
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b018
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b018
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b018
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b018
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b018
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b018
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b018
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b018
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b018
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b018
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b018
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&vgen3_reg {
-	regulator-always-on;
-};
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
deleted file mode 100644
index f69eec18d8657..0000000000000
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2016 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-sabresd.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
-	compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
-};
-
-&reg_arm {
-	vin-supply = <&sw2_reg>;
-};
-
-&iomuxc {
-	imx6qdl-sabresd {
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
-				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
-				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
-				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&vgen3_reg {
-	regulator-always-on;
-};
-
-&pcie {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-tqma6b.dtsi b/arch/arm/boot/dts/imx6qp-tqma6b.dtsi
deleted file mode 100644
index bb6ff7c64b271..0000000000000
--- a/arch/arm/boot/dts/imx6qp-tqma6b.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- */
-
-#include "imx6q.dtsi"
-#include "imx6qp.dtsi"
-#include "imx6qdl-tqma6b.dtsi"
-#include "imx6qdl-tqma6.dtsi"
-
-/ {
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts
deleted file mode 100644
index 92b38e6699aaf..0000000000000
--- a/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6qp-tx6qp-8037.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-8037 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts
deleted file mode 100644
index ffc0f2ee11d23..0000000000000
--- a/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6qp.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6QP-8037 Module";
-	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts
deleted file mode 100644
index 07ad70718aec5..0000000000000
--- a/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6qp-tx6qp-8137.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-8137 Module on MB7 baseboard";
-	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts
deleted file mode 100644
index dd494d587014e..0000000000000
--- a/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6qp.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lvds.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6QP-8137 Module";
-	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/imx6qp-vicutp.dts
deleted file mode 100644
index 49ff145fffe54..0000000000000
--- a/arch/arm/boot/dts/imx6qp-vicutp.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2014 Protonic Holland
- */
-
-/dts-v1/;
-#include "imx6qp.dtsi"
-#include "imx6qdl-vicut1.dtsi"
-#include "imx6qdl-vicut1-12inch.dtsi"
-
-/ {
-	model = "Kverneland UT1P Board";
-	compatible = "kvg,vicutp", "fsl,imx6qp";
-};
diff --git a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
deleted file mode 100644
index 08d8b78a2096f..0000000000000
--- a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-/dts-v1/;
-#include "imx6qp.dtsi"
-#include "imx6qdl-wandboard-revd1.dtsi"
-
-/ {
-	model = "Wandboard i.MX6 QuadPlus Board revD1";
-	compatible = "wand,imx6qp-wandboard", "fsl,imx6qp";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
deleted file mode 100644
index afaf4a6759d4b..0000000000000
--- a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2021 Y Soft Corporation, a.s.
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6dl-yapp4-common.dtsi"
-
-/ {
-	model = "Y Soft IOTA Crux+ i.MX6QuadPlus board";
-	compatible = "ysoft,imx6qp-yapp4-crux-plus", "fsl,imx6qp";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0xf0000000>;
-	};
-};
-
-&gpio_oled {
-	status = "okay";
-};
-
-&leds {
-	status = "okay";
-};
-
-&oled_1305 {
-	status = "okay";
-};
-
-&oled_1309 {
-	status = "okay";
-};
-
-&reg_pu {
-	regulator-always-on;
-};
-
-&reg_usb_h1_vbus {
-	status = "okay";
-};
-
-&touchkeys {
-	status = "okay";
-};
-
-&uart2 {
-	status = "disabled";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts
deleted file mode 100644
index 4a961a33bf2d0..0000000000000
--- a/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2021 Y Soft Corporation, a.s.
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6dl-yapp43-common.dtsi"
-
-/ {
-	model = "Y Soft IOTA Pegasus+ i.MX6QuadPlus board";
-	compatible = "ysoft,imx6qp-yapp4-pegasus-plus", "fsl,imx6qp";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0xf0000000>;
-	};
-};
-
-&gpio_oled {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&leds {
-	status = "okay";
-};
-
-&oled_1305 {
-	status = "okay";
-};
-
-&oled_1309 {
-	status = "okay";
-};
-
-&reg_pu {
-	regulator-always-on;
-};
-
-&reg_usb_h1_vbus {
-	status = "okay";
-};
-
-&touchkeys {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
deleted file mode 100644
index 57de447c4609d..0000000000000
--- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2016-2017 Zodiac Inflight Innovations
- */
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-zii-rdu2.dtsi"
-
-/ {
-	model = "ZII RDU2+ Board";
-	compatible = "zii,imx6qp-zii-rdu2", "fsl,imx6qp";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-};
-
-&gpu_3d {
-	assigned-clocks = <&clks IMX6QDL_CLK_GPU3D_SHADER_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD1_594M>;
-};
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
deleted file mode 100644
index fc164991d2ae8..0000000000000
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2016 Freescale Semiconductor, Inc.
-
-#include "imx6q.dtsi"
-
-/ {
-	soc {
-		ocram2: sram@940000 {
-			compatible = "mmio-sram";
-			reg = <0x00940000 0x20000>;
-			ranges = <0 0x00940000 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&clks IMX6QDL_CLK_OCRAM>;
-		};
-
-		ocram3: sram@960000 {
-			compatible = "mmio-sram";
-			reg = <0x00960000 0x20000>;
-			ranges = <0 0x00960000 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&clks IMX6QDL_CLK_OCRAM>;
-		};
-
-		bus@2100000 {
-			pre1: pre@21c8000 {
-				compatible = "fsl,imx6qp-pre";
-				reg = <0x021c8000 0x1000>;
-				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clks IMX6QDL_CLK_PRE0>;
-				clock-names = "axi";
-				fsl,iram = <&ocram2>;
-			};
-
-			pre2: pre@21c9000 {
-				compatible = "fsl,imx6qp-pre";
-				reg = <0x021c9000 0x1000>;
-				interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clks IMX6QDL_CLK_PRE1>;
-				clock-names = "axi";
-				fsl,iram = <&ocram2>;
-			};
-
-			pre3: pre@21ca000 {
-				compatible = "fsl,imx6qp-pre";
-				reg = <0x021ca000 0x1000>;
-				interrupts = <GIC_SPI 98 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clks IMX6QDL_CLK_PRE2>;
-				clock-names = "axi";
-				fsl,iram = <&ocram3>;
-			};
-
-			pre4: pre@21cb000 {
-				compatible = "fsl,imx6qp-pre";
-				reg = <0x021cb000 0x1000>;
-				interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clks IMX6QDL_CLK_PRE3>;
-				clock-names = "axi";
-				fsl,iram = <&ocram3>;
-			};
-
-			prg1: prg@21cc000 {
-				compatible = "fsl,imx6qp-prg";
-				reg = <0x021cc000 0x1000>;
-				clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
-					 <&clks IMX6QDL_CLK_PRG0_AXI>;
-				clock-names = "ipg", "axi";
-				fsl,pres = <&pre1>, <&pre2>, <&pre3>;
-			};
-
-			prg2: prg@21cd000 {
-				compatible = "fsl,imx6qp-prg";
-				reg = <0x021cd000 0x1000>;
-				clocks = <&clks IMX6QDL_CLK_PRG1_APB>,
-					 <&clks IMX6QDL_CLK_PRG1_AXI>;
-				clock-names = "ipg", "axi";
-				fsl,pres = <&pre4>, <&pre2>, <&pre3>;
-			};
-		};
-	};
-};
-
-&fec {
-	interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 119 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpc {
-	compatible = "fsl,imx6qp-gpc", "fsl,imx6q-gpc";
-};
-
-&ipu1 {
-	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
-	fsl,prg = <&prg1>;
-};
-
-&ipu2 {
-	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
-	fsl,prg = <&prg2>;
-};
-
-&ldb {
-	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>;
-	clock-names = "di0_pll", "di1_pll",
-		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
-		      "di0", "di1";
-};
-
-&mmdc0 {
-	compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
-};
-
-&pcie {
-	compatible = "fsl,imx6qp-pcie";
-};
diff --git a/arch/arm/boot/dts/imx6s-dhcom-drc02.dts b/arch/arm/boot/dts/imx6s-dhcom-drc02.dts
deleted file mode 100644
index 4077b607c29ea..0000000000000
--- a/arch/arm/boot/dts/imx6s-dhcom-drc02.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2021 DH electronics GmbH
- *
- * DHCOM iMX6 variant:
- * DHCM-iMX6S-C0800-R102-F0409-E-CAN2-RTC-I-01D2
- * DHCOM PCB number: 493-400 or newer
- * DRC02 PCB number: 568-100 or newer
- */
-/dts-v1/;
-
-/*
- * The kernel only distinguishes between i.MX6 Quad and DualLite,
- * but the Solo is actually a DualLite with only one CPU. So use
- * DualLite for the Solo and disable one CPU node.
- */
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-dhcom-som.dtsi"
-#include "imx6qdl-dhcom-drc02.dtsi"
-
-/ {
-	model = "DH electronics i.MX6S DHCOM on DRC02";
-	compatible = "dh,imx6s-dhcom-drc02", "dh,imx6s-dhcom-som",
-		     "fsl,imx6dl";
-
-	cpus {
-		/delete-node/ cpu@1;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
deleted file mode 100644
index dc5d596c18db4..0000000000000
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ /dev/null
@@ -1,658 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-//Copyright (C) 2013 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6sl.dtsi"
-
-/ {
-	model = "Freescale i.MX6 SoloLite EVK Board";
-	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	backlight_display: backlight_display {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led-user {
-			label = "debug";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&swbst_reg>;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&swbst_reg>;
-	};
-
-	reg_aud3v: regulator-aud3v {
-		compatible = "regulator-fixed";
-		regulator-name = "wm8962-supply-3v15";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-		regulator-boot-on;
-	};
-
-	reg_aud4v: regulator-aud4v {
-		compatible = "regulator-fixed";
-		regulator-name = "wm8962-supply-4v2";
-		regulator-min-microvolt = <4325000>;
-		regulator-max-microvolt = <4325000>;
-		regulator-boot-on;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
-		regulator-name = "lcd-3v3";
-		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lcd_5v: regulator-lcd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	sound {
-		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hp>;
-		model = "wm8962-audio";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-		hp-det-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux3>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_fec>;
-	pinctrl-1 = <&pinctrl_fec_sleep>;
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: wm8962@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
-		DCVDD-supply = <&vgen3_reg>;
-		DBVDD-supply = <&reg_aud3v>;
-		AVDD-supply = <&vgen3_reg>;
-		CPVDD-supply = <&vgen3_reg>;
-		MICVDD-supply = <&reg_aud3v>;
-		PLLVDD-supply = <&vgen3_reg>;
-		SPKVDD1-supply = <&reg_aud4v>;
-		SPKVDD2-supply = <&reg_aud4v>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6sl-evk {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
-				MX6SL_PAD_KEY_COL7__GPIO4_IO06    0x17059
-				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
-				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
-				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
-				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
-				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
-				MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
-			>;
-		};
-
-		pinctrl_audmux3: audmux3grp {
-			fsl,pins = <
-				MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130b0
-				MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130b0
-				MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110b0
-				MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
-				MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
-				MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
-				MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11	0x80000000
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX6SL_PAD_FEC_MDC__FEC_MDC		0x1b0b0
-				MX6SL_PAD_FEC_MDIO__FEC_MDIO		0x1b0b0
-				MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV		0x1b0b0
-				MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0	0x1b0b0
-				MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1	0x1b0b0
-				MX6SL_PAD_FEC_TX_EN__FEC_TX_EN		0x1b0b0
-				MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0	0x1b0b0
-				MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1	0x1b0b0
-				MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
-			>;
-		};
-
-		pinctrl_fec_sleep: fecgrp-sleep {
-			fsl,pins = <
-				MX6SL_PAD_FEC_MDC__GPIO4_IO23      0x3080
-				MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25   0x3080
-				MX6SL_PAD_FEC_RXD0__GPIO4_IO17     0x3080
-				MX6SL_PAD_FEC_RXD1__GPIO4_IO18     0x3080
-				MX6SL_PAD_FEC_TX_EN__GPIO4_IO22    0x3080
-				MX6SL_PAD_FEC_TXD0__GPIO4_IO24     0x3080
-				MX6SL_PAD_FEC_TXD1__GPIO4_IO16     0x3080
-				MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26  0x3080
-			>;
-		};
-
-		pinctrl_hp: hpgrp {
-			fsl,pins = <
-				MX6SL_PAD_FEC_RX_ER__GPIO4_IO19	  0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
-				MX6SL_PAD_I2C1_SDA__I2C1_SDA	0x4001b8b1
-			>;
-		};
-
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6SL_PAD_I2C2_SCL__I2C2_SCL	0x4001b8b1
-				MX6SL_PAD_I2C2_SDA__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
-				MX6SL_PAD_KEY_ROW1__KEY_ROW1    0x1b010
-				MX6SL_PAD_KEY_ROW2__KEY_ROW2    0x1b0b0
-				MX6SL_PAD_KEY_COL0__KEY_COL0    0x110b0
-				MX6SL_PAD_KEY_COL1__KEY_COL1    0x110b0
-				MX6SL_PAD_KEY_COL2__KEY_COL2    0x110b0
-			>;
-		};
-
-		pinctrl_lcd: lcdgrp {
-			fsl,pins = <
-				MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0
-				MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0
-				MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0
-				MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0
-				MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0
-				MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0
-				MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0
-				MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0
-				MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0
-				MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0
-				MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0
-				MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0
-				MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0
-				MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0
-				MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0
-				MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0
-				MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0
-				MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0
-				MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0
-				MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0
-				MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0
-				MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0
-				MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0
-				MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0
-				MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0
-				MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0
-				MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0
-				MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
-			>;
-		};
-
-		pinctrl_pwm1: pwmgrp {
-			fsl,pins = <
-				MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
-			>;
-		};
-
-		pinctrl_reg_lcd_3v3: reglcd3v3grp {
-			fsl,pins = <
-				MX6SL_PAD_KEY_ROW5__GPIO4_IO03    0x17059
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
-				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg1: usbotg1grp {
-			fsl,pins = <
-				MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6SL_PAD_SD1_CMD__SD1_CMD		0x17059
-				MX6SL_PAD_SD1_CLK__SD1_CLK		0x10059
-				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x17059
-				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x17059
-				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x17059
-				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x17059
-				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x17059
-				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x17059
-				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x17059
-				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170b9
-				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100b9
-				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170b9
-				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170b9
-				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170b9
-				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170b9
-				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170b9
-				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170b9
-				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170b9
-				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170f9
-				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100f9
-				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
-				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
-				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
-				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
-				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170f9
-				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170f9
-				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170f9
-				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170f9
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100b9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100f9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170b9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100b9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170f9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100f9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			>;
-		};
-	};
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	linux,keymap = <
-			MATRIX_KEY(0x0, 0x0, KEY_UP)         /* ROW0, COL0 */
-			MATRIX_KEY(0x0, 0x1, KEY_DOWN)       /* ROW0, COL1 */
-			MATRIX_KEY(0x0, 0x2, KEY_ENTER)      /* ROW0, COL2 */
-			MATRIX_KEY(0x1, 0x0, KEY_HOME)       /* ROW1, COL0 */
-			MATRIX_KEY(0x1, 0x1, KEY_RIGHT)      /* ROW1, COL1 */
-			MATRIX_KEY(0x1, 0x2, KEY_LEFT)       /* ROW1, COL2 */
-			MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
-			MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP)   /* ROW2, COL1 */
-	>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcd>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&sw2_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&sw2_reg>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	bus-width = <8>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6sl-kobo-aura2.dts b/arch/arm/boot/dts/imx6sl-kobo-aura2.dts
deleted file mode 100644
index 657d0f1b6115f..0000000000000
--- a/arch/arm/boot/dts/imx6sl-kobo-aura2.dts
+++ /dev/null
@@ -1,555 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree for the Kobo Aura 2 ebook reader
- *
- * Name on mainboard is: 37NB-E60QL0+4B1
- * Serials start with: E60QL2
- *
- * Copyright 2022 Andreas Kemnade
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include "imx6sl.dtsi"
-
-/ {
-	model = "Kobo Aura 2";
-	compatible = "kobo,aura2", "fsl,imx6sl";
-
-	aliases {
-		mmc0 = &usdhc2;
-		mmc1 = &usdhc3;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	gpio_keys: gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		key-cover {
-			label = "Cover";
-			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-			linux,code = <SW_LID>;
-			linux,input-type = <EV_SW>;
-			wakeup-source;
-		};
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led-0 {
-			label = "koboaura2:white:on";
-			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_WHITE>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	reg_wifi: regulator-wifi {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_power>;
-		regulator-name = "SD3_SPWR";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_reset>;
-		post-power-on-delay-ms = <20>;
-		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_sleep>;
-	status = "okay";
-
-	lm3630a: backlight@36 {
-		compatible = "ti,lm3630a";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
-		reg = <0x36>;
-		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@0 {
-			reg = <0>;
-			led-sources = <0>;
-			label = "backlight";
-			default-brightness = <0>;
-			max-brightness = <255>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_sleep>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	/* eKTF2232 at 0x15 */
-	/* FP9928 at 0x48 */
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	ricoh619: pmic@32 {
-		compatible = "ricoh,rc5t619";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ricoh_gpio>;
-		reg = <0x32>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		system-power-controller;
-
-		regulators {
-			dcdc1_reg: DCDC1 {
-				regulator-name = "DCDC1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <900000>;
-					regulator-suspend-min-microvolt = <900000>;
-				};
-			};
-
-			/* Core3_3V3 */
-			dcdc2_reg: DCDC2 {
-				regulator-name = "DCDC2";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <3100000>;
-					regulator-suspend-min-microvolt = <3100000>;
-				};
-			};
-
-			dcdc3_reg: DCDC3 {
-				regulator-name = "DCDC3";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <1140000>;
-					regulator-suspend-min-microvolt = <1140000>;
-				};
-			};
-
-			/* Core4_1V2 */
-			dcdc4_reg: DCDC4 {
-				regulator-name = "DCDC4";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <1140000>;
-					regulator-suspend-min-microvolt = <1140000>;
-				};
-			};
-
-			/* Core4_1V8 */
-			dcdc5_reg: DCDC5 {
-				regulator-name = "DCDC5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <1700000>;
-					regulator-suspend-min-microvolt = <1700000>;
-				};
-			};
-
-			/* IR_3V3 */
-			ldo1_reg: LDO1  {
-				regulator-name = "LDO1";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* Core1_3V3 */
-			ldo2_reg: LDO2  {
-				regulator-name = "LDO2";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <3000000>;
-					regulator-suspend-min-microvolt = <3000000>;
-				};
-			};
-
-			/* Core5_1V2 */
-			ldo3_reg: LDO3  {
-				regulator-name = "LDO3";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "LDO4";
-				regulator-boot-on;
-			};
-
-			/* SPD_3V3 */
-			ldo5_reg: LDO5 {
-				regulator-name = "LDO5";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* DDR_0V6 */
-			ldo6_reg: LDO6 {
-				regulator-name = "LDO6";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* VDD_PWM */
-			ldo7_reg: LDO7 {
-				regulator-name = "LDO7";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* ldo_1v8 */
-			ldo8_reg: LDO8 {
-				regulator-name = "LDO8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "LDO9";
-				regulator-boot-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "LDO10";
-				regulator-boot-on;
-			};
-
-			ldortc1_reg: LDORTC1  {
-				regulator-name = "LDORTC1";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&dcdc2_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&dcdc2_reg>;
-};
-
-&reg_arm {
-	vin-supply = <&dcdc3_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&dcdc1_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&dcdc1_reg>;
-};
-
-&snvs_rtc {
-	/*
-	 * We are using the RTC in the PMIC, but this one is not disabled
-	 * in imx6sl.dtsi.
-	 */
-	status = "disabled";
-};
-
-&uart1 {
-	/* J4, through-holes */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart4 {
-	/* TP198, next to J4, SMD pads */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
-	non-removable;
-	status = "okay";
-
-	/* internal uSD card */
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
-	vmmc-supply = <&reg_wifi>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	cap-power-off-card;
-	non-removable;
-	status = "okay";
-
-	/*
-	 * RTL8189F SDIO WiFi
-	 */
-};
-
-&usbotg1 {
-	disable-over-current;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_gpio_keys: gpio-keysgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
-			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x17059
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
-			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c1_sleep: i2c1-sleepgrp {
-		fsl,pins = <
-			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
-			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
-			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c2_sleep: i2c2-sleepgrp {
-		fsl,pins = <
-			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
-			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
-			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
-		>;
-	};
-
-	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
-		fsl,pins = <
-			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */
-		>;
-	};
-
-	pinctrl_ricoh_gpio: ricoh-gpiogrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_CLK__GPIO5_IO15	0x1b8b1 /* ricoh619 chg */
-			MX6SL_PAD_SD1_DAT0__GPIO5_IO11	0x1b8b1 /* ricoh619 irq */
-			MX6SL_PAD_KEY_COL2__GPIO3_IO28	0x1b8b1 /* ricoh619 bat_low_int */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
-			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
-			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
-			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
-			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
-			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
-			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
-			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
-			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
-			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
-			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
-			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
-			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
-			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
-			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
-			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
-			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
-			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
-		>;
-	};
-
-	pinctrl_wifi_power: wifi-powergrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
-		>;
-	};
-
-	pinctrl_wifi_reset: wifi-resetgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sl-pinfunc.h b/arch/arm/boot/dts/imx6sl-pinfunc.h
deleted file mode 100644
index bcf16060ecdc1..0000000000000
--- a/arch/arm/boot/dts/imx6sl-pinfunc.h
+++ /dev/null
@@ -1,1073 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DTS_IMX6SL_PINFUNC_H
-#define __DTS_IMX6SL_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT          0x04c 0x2a4 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_MCLK__PWM4_OUT               0x04c 0x2a4 0x000 0x1 0x0
-#define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY             0x04c 0x2a4 0x6b4 0x2 0x0
-#define MX6SL_PAD_AUD_MCLK__FEC_MDC                0x04c 0x2a4 0x000 0x3 0x0
-#define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB      0x04c 0x2a4 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_MCLK__GPIO1_IO06             0x04c 0x2a4 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK          0x04c 0x2a4 0x7f4 0x6 0x0
-#define MX6SL_PAD_AUD_RXC__AUD3_RXC                0x050 0x2a8 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_RXC__I2C1_SDA                0x050 0x2a8 0x720 0x1 0x0
-#define MX6SL_PAD_AUD_RXC__UART3_TX_DATA           0x050 0x2a8 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_RXC__UART3_RX_DATA           0x050 0x2a8 0x80c 0x2 0x0
-#define MX6SL_PAD_AUD_RXC__FEC_TX_CLK              0x050 0x2a8 0x70c 0x3 0x0
-#define MX6SL_PAD_AUD_RXC__I2C3_SDA                0x050 0x2a8 0x730 0x4 0x0
-#define MX6SL_PAD_AUD_RXC__GPIO1_IO01              0x050 0x2a8 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_RXC__ECSPI3_SS1              0x050 0x2a8 0x6c4 0x6 0x0
-#define MX6SL_PAD_AUD_RXD__AUD3_RXD                0x054 0x2ac 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_RXD__ECSPI3_MOSI             0x054 0x2ac 0x6bc 0x1 0x0
-#define MX6SL_PAD_AUD_RXD__UART4_RX_DATA           0x054 0x2ac 0x814 0x2 0x0
-#define MX6SL_PAD_AUD_RXD__UART4_TX_DATA           0x054 0x2ac 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_RXD__FEC_RX_ER               0x054 0x2ac 0x708 0x3 0x0
-#define MX6SL_PAD_AUD_RXD__SD1_LCTL                0x054 0x2ac 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_RXD__GPIO1_IO02              0x054 0x2ac 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_RXFS__AUD3_RXFS              0x058 0x2b0 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_RXFS__I2C1_SCL               0x058 0x2b0 0x71c 0x1 0x0
-#define MX6SL_PAD_AUD_RXFS__UART3_RX_DATA          0x058 0x2b0 0x80c 0x2 0x1
-#define MX6SL_PAD_AUD_RXFS__UART3_TX_DATA          0x058 0x2b0 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_RXFS__FEC_MDIO               0x058 0x2b0 0x6f4 0x3 0x0
-#define MX6SL_PAD_AUD_RXFS__I2C3_SCL               0x058 0x2b0 0x72c 0x4 0x0
-#define MX6SL_PAD_AUD_RXFS__GPIO1_IO00             0x058 0x2b0 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_RXFS__ECSPI3_SS0             0x058 0x2b0 0x6c0 0x6 0x0
-#define MX6SL_PAD_AUD_TXC__AUD3_TXC                0x05c 0x2b4 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_TXC__ECSPI3_MISO             0x05c 0x2b4 0x6b8 0x1 0x0
-#define MX6SL_PAD_AUD_TXC__UART4_TX_DATA           0x05c 0x2b4 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_TXC__UART4_RX_DATA           0x05c 0x2b4 0x814 0x2 0x1
-#define MX6SL_PAD_AUD_TXC__FEC_RX_DV               0x05c 0x2b4 0x704 0x3 0x0
-#define MX6SL_PAD_AUD_TXC__SD2_LCTL                0x05c 0x2b4 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_TXC__GPIO1_IO03              0x05c 0x2b4 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_TXD__AUD3_TXD                0x060 0x2b8 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_TXD__ECSPI3_SCLK             0x060 0x2b8 0x6b0 0x1 0x0
-#define MX6SL_PAD_AUD_TXD__UART4_CTS_B             0x060 0x2b8 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_TXD__UART4_RTS_B             0x060 0x2b8 0x810 0x2 0x0
-#define MX6SL_PAD_AUD_TXD__FEC_TX_DATA0            0x060 0x2b8 0x000 0x3 0x0
-#define MX6SL_PAD_AUD_TXD__SD4_LCTL                0x060 0x2b8 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_TXD__GPIO1_IO05              0x060 0x2b8 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_TXFS__AUD3_TXFS              0x064 0x2bc 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_TXFS__PWM3_OUT               0x064 0x2bc 0x000 0x1 0x0
-#define MX6SL_PAD_AUD_TXFS__UART4_RTS_B            0x064 0x2bc 0x810 0x2 0x1
-#define MX6SL_PAD_AUD_TXFS__UART4_CTS_B            0x064 0x2bc 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_TXFS__FEC_RX_DATA1           0x064 0x2bc 0x6fc 0x3 0x0
-#define MX6SL_PAD_AUD_TXFS__SD3_LCTL               0x064 0x2bc 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_TXFS__GPIO1_IO04             0x064 0x2bc 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO         0x068 0x358 0x684 0x0 0x0
-#define MX6SL_PAD_ECSPI1_MISO__AUD4_TXFS           0x068 0x358 0x5f8 0x1 0x0
-#define MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B         0x068 0x358 0x818 0x2 0x0
-#define MX6SL_PAD_ECSPI1_MISO__UART5_CTS_B         0x068 0x358 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI1_MISO__EPDC_BDR0           0x068 0x358 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI1_MISO__SD2_WP              0x068 0x358 0x834 0x4 0x0
-#define MX6SL_PAD_ECSPI1_MISO__GPIO4_IO10          0x068 0x358 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI         0x06c 0x35c 0x688 0x0 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__AUD4_TXC            0x06c 0x35c 0x5f4 0x1 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA       0x06c 0x35c 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__UART5_RX_DATA       0x06c 0x35c 0x81c 0x2 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__EPDC_VCOM1          0x06c 0x35c 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__SD2_VSELECT         0x06c 0x35c 0x000 0x4 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__GPIO4_IO09          0x06c 0x35c 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK         0x070 0x360 0x67c 0x0 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__AUD4_TXD            0x070 0x360 0x5e8 0x1 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA       0x070 0x360 0x81c 0x2 0x1
-#define MX6SL_PAD_ECSPI1_SCLK__UART5_TX_DATA       0x070 0x360 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__EPDC_VCOM0          0x070 0x360 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__SD2_RESET           0x070 0x360 0x000 0x4 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__GPIO4_IO08          0x070 0x360 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC         0x070 0x360 0x820 0x6 0x0
-#define MX6SL_PAD_ECSPI1_SS0__ECSPI1_SS0           0x074 0x364 0x68c 0x0 0x0
-#define MX6SL_PAD_ECSPI1_SS0__AUD4_RXD             0x074 0x364 0x5e4 0x1 0x0
-#define MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B          0x074 0x364 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI1_SS0__UART5_RTS_B          0x074 0x364 0x818 0x2 0x1
-#define MX6SL_PAD_ECSPI1_SS0__EPDC_BDR1            0x074 0x364 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI1_SS0__SD2_CD_B             0x074 0x364 0x830 0x4 0x0
-#define MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11           0x074 0x364 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_SS0__USB_OTG2_PWR         0x074 0x364 0x000 0x6 0x0
-#define MX6SL_PAD_ECSPI2_MISO__ECSPI2_MISO         0x078 0x368 0x6a0 0x0 0x0
-#define MX6SL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0     0x078 0x368 0x000 0x1 0x0
-#define MX6SL_PAD_ECSPI2_MISO__UART3_RTS_B         0x078 0x368 0x808 0x2 0x0
-#define MX6SL_PAD_ECSPI2_MISO__UART3_CTS_B         0x078 0x368 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI2_MISO__CSI_MCLK            0x078 0x368 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI2_MISO__SD1_WP              0x078 0x368 0x82c 0x4 0x0
-#define MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14          0x078 0x368 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI2_MISO__USB_OTG1_OC         0x078 0x368 0x824 0x6 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__ECSPI2_MOSI         0x07c 0x36c 0x6a4 0x0 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1     0x07c 0x36c 0x000 0x1 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__UART3_TX_DATA       0x07c 0x36c 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__UART3_RX_DATA       0x07c 0x36c 0x80c 0x2 0x2
-#define MX6SL_PAD_ECSPI2_MOSI__CSI_HSYNC           0x07c 0x36c 0x670 0x3 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__SD1_VSELECT         0x07c 0x36c 0x000 0x4 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13          0x07c 0x36c 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__ECSPI2_SCLK         0x080 0x370 0x69c 0x0 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK       0x080 0x370 0x7f4 0x1 0x1
-#define MX6SL_PAD_ECSPI2_SCLK__UART3_RX_DATA       0x080 0x370 0x80c 0x2 0x3
-#define MX6SL_PAD_ECSPI2_SCLK__UART3_TX_DATA       0x080 0x370 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__CSI_PIXCLK          0x080 0x370 0x674 0x3 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__SD1_RESET           0x080 0x370 0x000 0x4 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__GPIO4_IO12          0x080 0x370 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC         0x080 0x370 0x820 0x6 0x1
-#define MX6SL_PAD_ECSPI2_SS0__ECSPI2_SS0           0x084 0x374 0x6a8 0x0 0x0
-#define MX6SL_PAD_ECSPI2_SS0__ECSPI1_SS3           0x084 0x374 0x698 0x1 0x0
-#define MX6SL_PAD_ECSPI2_SS0__UART3_CTS_B          0x084 0x374 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI2_SS0__UART3_RTS_B          0x084 0x374 0x808 0x2 0x1
-#define MX6SL_PAD_ECSPI2_SS0__CSI_VSYNC            0x084 0x374 0x678 0x3 0x0
-#define MX6SL_PAD_ECSPI2_SS0__SD1_CD_B             0x084 0x374 0x828 0x4 0x0
-#define MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15           0x084 0x374 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI2_SS0__USB_OTG1_PWR         0x084 0x374 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_BDR0__EPDC_BDR0             0x088 0x378 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_BDR0__SD4_CLK               0x088 0x378 0x850 0x1 0x0
-#define MX6SL_PAD_EPDC_BDR0__UART3_RTS_B           0x088 0x378 0x808 0x2 0x2
-#define MX6SL_PAD_EPDC_BDR0__UART3_CTS_B           0x088 0x378 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_BDR0__EIM_ADDR26            0x088 0x378 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_BDR0__SPDC_RL               0x088 0x378 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_BDR0__GPIO2_IO05            0x088 0x378 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_BDR0__EPDC_SDCE7            0x088 0x378 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_BDR1__EPDC_BDR1             0x08c 0x37c 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_BDR1__SD4_CMD               0x08c 0x37c 0x858 0x1 0x0
-#define MX6SL_PAD_EPDC_BDR1__UART3_CTS_B           0x08c 0x37c 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_BDR1__UART3_RTS_B           0x08c 0x37c 0x808 0x2 0x3
-#define MX6SL_PAD_EPDC_BDR1__EIM_CRE               0x08c 0x37c 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_BDR1__SPDC_UD               0x08c 0x37c 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_BDR1__GPIO2_IO06            0x08c 0x37c 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_BDR1__EPDC_SDCE8            0x08c 0x37c 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_D0__EPDC_DATA00             0x090 0x380 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D0__ECSPI4_MOSI             0x090 0x380 0x6d8 0x1 0x0
-#define MX6SL_PAD_EPDC_D0__LCD_DATA24              0x090 0x380 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D0__CSI_DATA00              0x090 0x380 0x630 0x3 0x0
-#define MX6SL_PAD_EPDC_D0__SPDC_DATA00             0x090 0x380 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D0__GPIO1_IO07              0x090 0x380 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D1__EPDC_DATA01             0x094 0x384 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D1__ECSPI4_MISO             0x094 0x384 0x6d4 0x1 0x0
-#define MX6SL_PAD_EPDC_D1__LCD_DATA25              0x094 0x384 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D1__CSI_DATA01              0x094 0x384 0x634 0x3 0x0
-#define MX6SL_PAD_EPDC_D1__SPDC_DATA01             0x094 0x384 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D1__GPIO1_IO08              0x094 0x384 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D10__EPDC_DATA10            0x098 0x388 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D10__ECSPI3_SS0             0x098 0x388 0x6c0 0x1 0x1
-#define MX6SL_PAD_EPDC_D10__EPDC_PWR_CTRL2         0x098 0x388 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D10__EIM_ADDR18             0x098 0x388 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D10__SPDC_DATA10            0x098 0x388 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D10__GPIO1_IO17             0x098 0x388 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D10__SD4_WP                 0x098 0x388 0x87c 0x6 0x0
-#define MX6SL_PAD_EPDC_D11__EPDC_DATA11            0x09c 0x38c 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D11__ECSPI3_SCLK            0x09c 0x38c 0x6b0 0x1 0x1
-#define MX6SL_PAD_EPDC_D11__EPDC_PWR_CTRL3         0x09c 0x38c 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D11__EIM_ADDR19             0x09c 0x38c 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D11__SPDC_DATA11            0x09c 0x38c 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D11__GPIO1_IO18             0x09c 0x38c 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D11__SD4_CD_B               0x09c 0x38c 0x854 0x6 0x0
-#define MX6SL_PAD_EPDC_D12__EPDC_DATA12            0x0a0 0x390 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D12__UART2_RX_DATA          0x0a0 0x390 0x804 0x1 0x0
-#define MX6SL_PAD_EPDC_D12__UART2_TX_DATA          0x0a0 0x390 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D12__EPDC_PWR_COM           0x0a0 0x390 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D12__EIM_ADDR20             0x0a0 0x390 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D12__SPDC_DATA12            0x0a0 0x390 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D12__GPIO1_IO19             0x0a0 0x390 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D12__ECSPI3_SS1             0x0a0 0x390 0x6c4 0x6 0x1
-#define MX6SL_PAD_EPDC_D13__EPDC_DATA13            0x0a4 0x394 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D13__UART2_TX_DATA          0x0a4 0x394 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D13__UART2_RX_DATA          0x0a4 0x394 0x804 0x1 0x1
-#define MX6SL_PAD_EPDC_D13__EPDC_PWR_IRQ           0x0a4 0x394 0x6e8 0x2 0x0
-#define MX6SL_PAD_EPDC_D13__EIM_ADDR21             0x0a4 0x394 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D13__SPDC_DATA13            0x0a4 0x394 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D13__GPIO1_IO20             0x0a4 0x394 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D13__ECSPI3_SS2             0x0a4 0x394 0x6c8 0x6 0x0
-#define MX6SL_PAD_EPDC_D14__EPDC_DATA14            0x0a8 0x398 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D14__UART2_RTS_B            0x0a8 0x398 0x800 0x1 0x0
-#define MX6SL_PAD_EPDC_D14__UART2_CTS_B            0x0a8 0x398 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D14__EPDC_PWR_STAT          0x0a8 0x398 0x6ec 0x2 0x0
-#define MX6SL_PAD_EPDC_D14__EIM_ADDR22             0x0a8 0x398 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D14__SPDC_DATA14            0x0a8 0x398 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D14__GPIO1_IO21             0x0a8 0x398 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D14__ECSPI3_SS3             0x0a8 0x398 0x6cc 0x6 0x0
-#define MX6SL_PAD_EPDC_D15__EPDC_DATA15            0x0ac 0x39c 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D15__UART2_CTS_B            0x0ac 0x39c 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D15__UART2_RTS_B            0x0ac 0x39c 0x800 0x1 0x1
-#define MX6SL_PAD_EPDC_D15__EPDC_PWR_WAKE          0x0ac 0x39c 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D15__EIM_ADDR23             0x0ac 0x39c 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D15__SPDC_DATA15            0x0ac 0x39c 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D15__GPIO1_IO22             0x0ac 0x39c 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D15__ECSPI3_RDY             0x0ac 0x39c 0x6b4 0x6 0x1
-#define MX6SL_PAD_EPDC_D2__EPDC_DATA02             0x0b0 0x3a0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D2__ECSPI4_SS0              0x0b0 0x3a0 0x6dc 0x1 0x0
-#define MX6SL_PAD_EPDC_D2__LCD_DATA26              0x0b0 0x3a0 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D2__CSI_DATA02              0x0b0 0x3a0 0x638 0x3 0x0
-#define MX6SL_PAD_EPDC_D2__SPDC_DATA02             0x0b0 0x3a0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D2__GPIO1_IO09              0x0b0 0x3a0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D3__EPDC_DATA03             0x0b4 0x3a4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D3__ECSPI4_SCLK             0x0b4 0x3a4 0x6d0 0x1 0x0
-#define MX6SL_PAD_EPDC_D3__LCD_DATA27              0x0b4 0x3a4 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D3__CSI_DATA03              0x0b4 0x3a4 0x63c 0x3 0x0
-#define MX6SL_PAD_EPDC_D3__SPDC_DATA03             0x0b4 0x3a4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D3__GPIO1_IO10              0x0b4 0x3a4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D4__EPDC_DATA04             0x0b8 0x3a8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D4__ECSPI4_SS1              0x0b8 0x3a8 0x6e0 0x1 0x0
-#define MX6SL_PAD_EPDC_D4__LCD_DATA28              0x0b8 0x3a8 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D4__CSI_DATA04              0x0b8 0x3a8 0x640 0x3 0x0
-#define MX6SL_PAD_EPDC_D4__SPDC_DATA04             0x0b8 0x3a8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D4__GPIO1_IO11              0x0b8 0x3a8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D5__EPDC_DATA05             0x0bc 0x3ac 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D5__ECSPI4_SS2              0x0bc 0x3ac 0x6e4 0x1 0x0
-#define MX6SL_PAD_EPDC_D5__LCD_DATA29              0x0bc 0x3ac 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D5__CSI_DATA05              0x0bc 0x3ac 0x644 0x3 0x0
-#define MX6SL_PAD_EPDC_D5__SPDC_DATA05             0x0bc 0x3ac 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D5__GPIO1_IO12              0x0bc 0x3ac 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D6__EPDC_DATA06             0x0c0 0x3b0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D6__ECSPI4_SS3              0x0c0 0x3b0 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D6__LCD_DATA30              0x0c0 0x3b0 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D6__CSI_DATA06              0x0c0 0x3b0 0x648 0x3 0x0
-#define MX6SL_PAD_EPDC_D6__SPDC_DATA06             0x0c0 0x3b0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D6__GPIO1_IO13              0x0c0 0x3b0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D7__EPDC_DATA07             0x0c4 0x3b4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D7__ECSPI4_RDY              0x0c4 0x3b4 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D7__LCD_DATA31              0x0c4 0x3b4 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D7__CSI_DATA07              0x0c4 0x3b4 0x64c 0x3 0x0
-#define MX6SL_PAD_EPDC_D7__SPDC_DATA07             0x0c4 0x3b4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D7__GPIO1_IO14              0x0c4 0x3b4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D8__EPDC_DATA08             0x0c8 0x3b8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D8__ECSPI3_MOSI             0x0c8 0x3b8 0x6bc 0x1 0x1
-#define MX6SL_PAD_EPDC_D8__EPDC_PWR_CTRL0          0x0c8 0x3b8 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D8__EIM_ADDR16              0x0c8 0x3b8 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D8__SPDC_DATA08             0x0c8 0x3b8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D8__GPIO1_IO15              0x0c8 0x3b8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D8__SD4_RESET               0x0c8 0x3b8 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_D9__EPDC_DATA09             0x0cc 0x3bc 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D9__ECSPI3_MISO             0x0cc 0x3bc 0x6b8 0x1 0x1
-#define MX6SL_PAD_EPDC_D9__EPDC_PWR_CTRL1          0x0cc 0x3bc 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D9__EIM_ADDR17              0x0cc 0x3bc 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D9__SPDC_DATA09             0x0cc 0x3bc 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D9__GPIO1_IO16              0x0cc 0x3bc 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D9__SD4_VSELECT             0x0cc 0x3bc 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_GDCLK__EPDC_GDCLK           0x0d0 0x3c0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_GDCLK__ECSPI2_SS2           0x0d0 0x3c0 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKR            0x0d0 0x3c0 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_GDCLK__CSI_PIXCLK           0x0d0 0x3c0 0x674 0x3 0x1
-#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKL            0x0d0 0x3c0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_GDCLK__GPIO1_IO31           0x0d0 0x3c0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_GDCLK__SD2_RESET            0x0d0 0x3c0 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_GDOE__EPDC_GDOE             0x0d4 0x3c4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_GDOE__ECSPI2_SS3            0x0d4 0x3c4 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_GDOE__SPDC_YOER             0x0d4 0x3c4 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_GDOE__CSI_HSYNC             0x0d4 0x3c4 0x670 0x3 0x1
-#define MX6SL_PAD_EPDC_GDOE__SPDC_YOEL             0x0d4 0x3c4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_GDOE__GPIO2_IO00            0x0d4 0x3c4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_GDOE__SD2_VSELECT           0x0d4 0x3c4 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_GDRL__EPDC_GDRL             0x0d8 0x3c8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_GDRL__ECSPI2_RDY            0x0d8 0x3c8 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUR           0x0d8 0x3c8 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_GDRL__CSI_MCLK              0x0d8 0x3c8 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUL           0x0d8 0x3c8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_GDRL__GPIO2_IO01            0x0d8 0x3c8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_GDRL__SD2_WP                0x0d8 0x3c8 0x834 0x6 0x1
-#define MX6SL_PAD_EPDC_GDSP__EPDC_GDSP             0x0dc 0x3cc 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_GDSP__PWM4_OUT              0x0dc 0x3cc 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODR           0x0dc 0x3cc 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_GDSP__CSI_VSYNC             0x0dc 0x3cc 0x678 0x3 0x1
-#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODL           0x0dc 0x3cc 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_GDSP__GPIO2_IO02            0x0dc 0x3cc 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_GDSP__SD2_CD_B              0x0dc 0x3cc 0x830 0x6 0x1
-#define MX6SL_PAD_EPDC_PWRCOM__EPDC_PWR_COM        0x0e0 0x3d0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__SD4_DATA0           0x0e0 0x3d0 0x85c 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__LCD_DATA20          0x0e0 0x3d0 0x7c8 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__EIM_BCLK            0x0e0 0x3d0 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID         0x0e0 0x3d0 0x5dc 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__GPIO2_IO11          0x0e0 0x3d0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__SD3_RESET           0x0e0 0x3d0 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__EPDC_PWR_CTRL0    0x0e4 0x3d4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__AUD5_RXC          0x0e4 0x3d4 0x604 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__LCD_DATA16        0x0e4 0x3d4 0x7b8 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__EIM_RW            0x0e4 0x3d4 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__SPDC_YCKL         0x0e4 0x3d4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07        0x0e4 0x3d4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__SD4_RESET         0x0e4 0x3d4 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__EPDC_PWR_CTRL1    0x0e8 0x3d8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__AUD5_TXFS         0x0e8 0x3d8 0x610 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__LCD_DATA17        0x0e8 0x3d8 0x7bc 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__EIM_OE_B          0x0e8 0x3d8 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__SPDC_YOEL         0x0e8 0x3d8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08        0x0e8 0x3d8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__SD4_VSELECT       0x0e8 0x3d8 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__EPDC_PWR_CTRL2    0x0ec 0x3dc 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__AUD5_TXD          0x0ec 0x3dc 0x600 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__LCD_DATA18        0x0ec 0x3dc 0x7c0 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__EIM_CS0_B         0x0ec 0x3dc 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__SPDC_YDIOUL       0x0ec 0x3dc 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09        0x0ec 0x3dc 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__SD4_WP            0x0ec 0x3dc 0x87c 0x6 0x1
-#define MX6SL_PAD_EPDC_PWRCTRL3__EPDC_PWR_CTRL3    0x0f0 0x3e0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__AUD5_TXC          0x0f0 0x3e0 0x60c 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__LCD_DATA19        0x0f0 0x3e0 0x7c4 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__EIM_CS1_B         0x0f0 0x3e0 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__SPDC_YDIODL       0x0f0 0x3e0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10        0x0f0 0x3e0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__SD4_CD_B          0x0f0 0x3e0 0x854 0x6 0x1
-#define MX6SL_PAD_EPDC_PWRINT__EPDC_PWR_IRQ        0x0f4 0x3e4 0x6e8 0x0 0x1
-#define MX6SL_PAD_EPDC_PWRINT__SD4_DATA1           0x0f4 0x3e4 0x860 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRINT__LCD_DATA21          0x0f4 0x3e4 0x7cc 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRINT__EIM_ACLK_FREERUN    0x0f4 0x3e4 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRINT__USB_OTG2_ID         0x0f4 0x3e4 0x5e0 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12          0x0f4 0x3e4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRINT__SD3_VSELECT         0x0f4 0x3e4 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__EPDC_PWR_STAT      0x0f8 0x3e8 0x6ec 0x0 0x1
-#define MX6SL_PAD_EPDC_PWRSTAT__SD4_DATA2          0x0f8 0x3e8 0x864 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__LCD_DATA22         0x0f8 0x3e8 0x7d0 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__EIM_WAIT_B         0x0f8 0x3e8 0x884 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__ARM_EVENTI         0x0f8 0x3e8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13         0x0f8 0x3e8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__SD3_WP             0x0f8 0x3e8 0x84c 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__EPDC_PWR_WAKE    0x0fc 0x3ec 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__SD4_DATA3        0x0fc 0x3ec 0x868 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__LCD_DATA23       0x0fc 0x3ec 0x7d4 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__EIM_DTACK_B      0x0fc 0x3ec 0x880 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__ARM_EVENTO       0x0fc 0x3ec 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14       0x0fc 0x3ec 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__SD3_CD_B         0x0fc 0x3ec 0x838 0x6 0x0
-#define MX6SL_PAD_EPDC_SDCE0__EPDC_SDCE0           0x100 0x3f0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCE0__ECSPI2_SS1           0x100 0x3f0 0x6ac 0x1 0x0
-#define MX6SL_PAD_EPDC_SDCE0__PWM3_OUT             0x100 0x3f0 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCE0__EIM_CS2_B            0x100 0x3f0 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCE0__SPDC_YCKR            0x100 0x3f0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCE0__GPIO1_IO27           0x100 0x3f0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDCE1__EPDC_SDCE1           0x104 0x3f4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCE1__WDOG2_B              0x104 0x3f4 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_SDCE1__PWM4_OUT             0x104 0x3f4 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCE1__EIM_LBA_B            0x104 0x3f4 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCE1__SPDC_YOER            0x104 0x3f4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCE1__GPIO1_IO28           0x104 0x3f4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDCE2__EPDC_SDCE2           0x108 0x3f8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCE2__I2C3_SCL             0x108 0x3f8 0x72c 0x1 0x1
-#define MX6SL_PAD_EPDC_SDCE2__PWM1_OUT             0x108 0x3f8 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCE2__EIM_EB0_B            0x108 0x3f8 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCE2__SPDC_YDIOUR          0x108 0x3f8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29           0x108 0x3f8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDCE3__EPDC_SDCE3           0x10c 0x3fc 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCE3__I2C3_SDA             0x10c 0x3fc 0x730 0x1 0x1
-#define MX6SL_PAD_EPDC_SDCE3__PWM2_OUT             0x10c 0x3fc 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCE3__EIM_EB1_B            0x10c 0x3fc 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCE3__SPDC_YDIODR          0x10c 0x3fc 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCE3__GPIO1_IO30           0x10c 0x3fc 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDCLK__EPDC_SDCLK_P         0x110 0x400 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCLK__ECSPI2_MOSI          0x110 0x400 0x6a4 0x1 0x1
-#define MX6SL_PAD_EPDC_SDCLK__I2C2_SCL             0x110 0x400 0x724 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCLK__CSI_DATA08           0x110 0x400 0x650 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCLK__SPDC_CL              0x110 0x400 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCLK__GPIO1_IO23           0x110 0x400 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDLE__EPDC_SDLE             0x114 0x404 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDLE__ECSPI2_MISO           0x114 0x404 0x6a0 0x1 0x1
-#define MX6SL_PAD_EPDC_SDLE__I2C2_SDA              0x114 0x404 0x728 0x2 0x0
-#define MX6SL_PAD_EPDC_SDLE__CSI_DATA09            0x114 0x404 0x654 0x3 0x0
-#define MX6SL_PAD_EPDC_SDLE__SPDC_LD               0x114 0x404 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDLE__GPIO1_IO24            0x114 0x404 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDOE__EPDC_SDOE             0x118 0x408 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDOE__ECSPI2_SS0            0x118 0x408 0x6a8 0x1 0x1
-#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOR            0x118 0x408 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDOE__CSI_DATA10            0x118 0x408 0x658 0x3 0x0
-#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOL            0x118 0x408 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDOE__GPIO1_IO25            0x118 0x408 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDSHR           0x11c 0x40c 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDSHR__ECSPI2_SCLK          0x11c 0x40c 0x69c 0x1 0x1
-#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDCE4           0x11c 0x40c 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDSHR__CSI_DATA11           0x11c 0x40c 0x65c 0x3 0x0
-#define MX6SL_PAD_EPDC_SDSHR__SPDC_XDIOR           0x11c 0x40c 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDSHR__GPIO1_IO26           0x11c 0x40c 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_VCOM0__EPDC_VCOM0           0x120 0x410 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_VCOM0__AUD5_RXFS            0x120 0x410 0x608 0x1 0x0
-#define MX6SL_PAD_EPDC_VCOM0__UART3_RX_DATA        0x120 0x410 0x80c 0x2 0x4
-#define MX6SL_PAD_EPDC_VCOM0__UART3_TX_DATA        0x120 0x410 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_VCOM0__EIM_ADDR24           0x120 0x410 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_VCOM0__SPDC_VCOM0           0x120 0x410 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03           0x120 0x410 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_VCOM0__EPDC_SDCE5           0x120 0x410 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_VCOM1__EPDC_VCOM1           0x124 0x414 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_VCOM1__AUD5_RXD             0x124 0x414 0x5fc 0x1 0x0
-#define MX6SL_PAD_EPDC_VCOM1__UART3_TX_DATA        0x124 0x414 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_VCOM1__UART3_RX_DATA        0x124 0x414 0x80c 0x2 0x5
-#define MX6SL_PAD_EPDC_VCOM1__EIM_ADDR25           0x124 0x414 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_VCOM1__SPDC_VCOM1           0x124 0x414 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_VCOM1__GPIO2_IO04           0x124 0x414 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_VCOM1__EPDC_SDCE6           0x124 0x414 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV            0x128 0x418 0x704 0x0 0x1
-#define MX6SL_PAD_FEC_CRS_DV__SD4_DATA1            0x128 0x418 0x860 0x1 0x1
-#define MX6SL_PAD_FEC_CRS_DV__AUD6_TXC             0x128 0x418 0x624 0x2 0x0
-#define MX6SL_PAD_FEC_CRS_DV__ECSPI4_MISO          0x128 0x418 0x6d4 0x3 0x1
-#define MX6SL_PAD_FEC_CRS_DV__GPT_COMPARE2         0x128 0x418 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25           0x128 0x418 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_CRS_DV__ARM_TRACE31          0x128 0x418 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_MDC__FEC_MDC                 0x12c 0x41c 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_MDC__SD4_DATA4               0x12c 0x41c 0x86c 0x1 0x0
-#define MX6SL_PAD_FEC_MDC__AUDIO_CLK_OUT           0x12c 0x41c 0x000 0x2 0x0
-#define MX6SL_PAD_FEC_MDC__SD1_RESET               0x12c 0x41c 0x000 0x3 0x0
-#define MX6SL_PAD_FEC_MDC__SD3_RESET               0x12c 0x41c 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_MDC__GPIO4_IO23              0x12c 0x41c 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_MDC__ARM_TRACE29             0x12c 0x41c 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_MDIO__FEC_MDIO               0x130 0x420 0x6f4 0x0 0x1
-#define MX6SL_PAD_FEC_MDIO__SD4_CLK                0x130 0x420 0x850 0x1 0x1
-#define MX6SL_PAD_FEC_MDIO__AUD6_RXFS              0x130 0x420 0x620 0x2 0x0
-#define MX6SL_PAD_FEC_MDIO__ECSPI4_SS0             0x130 0x420 0x6dc 0x3 0x1
-#define MX6SL_PAD_FEC_MDIO__GPT_CAPTURE1           0x130 0x420 0x710 0x4 0x0
-#define MX6SL_PAD_FEC_MDIO__GPIO4_IO20             0x130 0x420 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_MDIO__ARM_TRACE26            0x130 0x420 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT         0x134 0x424 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_REF_CLK__SD4_RESET           0x134 0x424 0x000 0x1 0x0
-#define MX6SL_PAD_FEC_REF_CLK__WDOG1_B             0x134 0x424 0x000 0x2 0x0
-#define MX6SL_PAD_FEC_REF_CLK__PWM4_OUT            0x134 0x424 0x000 0x3 0x0
-#define MX6SL_PAD_FEC_REF_CLK__CCM_PMIC_READY      0x134 0x424 0x62c 0x4 0x0
-#define MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26          0x134 0x424 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_REF_CLK__SPDIF_EXT_CLK       0x134 0x424 0x7f4 0x6 0x2
-#define MX6SL_PAD_FEC_RX_ER__FEC_RX_ER             0x138 0x428 0x708 0x0 0x1
-#define MX6SL_PAD_FEC_RX_ER__SD4_DATA0             0x138 0x428 0x85c 0x1 0x1
-#define MX6SL_PAD_FEC_RX_ER__AUD6_RXD              0x138 0x428 0x614 0x2 0x0
-#define MX6SL_PAD_FEC_RX_ER__ECSPI4_MOSI           0x138 0x428 0x6d8 0x3 0x1
-#define MX6SL_PAD_FEC_RX_ER__GPT_COMPARE1          0x138 0x428 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_RX_ER__GPIO4_IO19            0x138 0x428 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_RX_ER__ARM_TRACE25           0x138 0x428 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0           0x13c 0x42c 0x6f8 0x0 0x0
-#define MX6SL_PAD_FEC_RXD0__SD4_DATA5              0x13c 0x42c 0x870 0x1 0x0
-#define MX6SL_PAD_FEC_RXD0__USB_OTG1_ID            0x13c 0x42c 0x5dc 0x2 0x1
-#define MX6SL_PAD_FEC_RXD0__SD1_VSELECT            0x13c 0x42c 0x000 0x3 0x0
-#define MX6SL_PAD_FEC_RXD0__SD3_VSELECT            0x13c 0x42c 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_RXD0__GPIO4_IO17             0x13c 0x42c 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_RXD0__ARM_TRACE24            0x13c 0x42c 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1           0x140 0x430 0x6fc 0x0 0x1
-#define MX6SL_PAD_FEC_RXD1__SD4_DATA2              0x140 0x430 0x864 0x1 0x1
-#define MX6SL_PAD_FEC_RXD1__AUD6_TXFS              0x140 0x430 0x628 0x2 0x0
-#define MX6SL_PAD_FEC_RXD1__ECSPI4_SS1             0x140 0x430 0x6e0 0x3 0x1
-#define MX6SL_PAD_FEC_RXD1__GPT_COMPARE3           0x140 0x430 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_RXD1__GPIO4_IO18             0x140 0x430 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_RXD1__FEC_COL                0x140 0x430 0x6f0 0x6 0x0
-#define MX6SL_PAD_FEC_TX_CLK__FEC_TX_CLK           0x144 0x434 0x70c 0x0 0x1
-#define MX6SL_PAD_FEC_TX_CLK__SD4_CMD              0x144 0x434 0x858 0x1 0x1
-#define MX6SL_PAD_FEC_TX_CLK__AUD6_RXC             0x144 0x434 0x61c 0x2 0x0
-#define MX6SL_PAD_FEC_TX_CLK__ECSPI4_SCLK          0x144 0x434 0x6d0 0x3 0x1
-#define MX6SL_PAD_FEC_TX_CLK__GPT_CAPTURE2         0x144 0x434 0x714 0x4 0x0
-#define MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21           0x144 0x434 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_TX_CLK__ARM_TRACE27          0x144 0x434 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_TX_EN__FEC_TX_EN             0x148 0x438 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_TX_EN__SD4_DATA6             0x148 0x438 0x874 0x1 0x0
-#define MX6SL_PAD_FEC_TX_EN__SPDIF_IN              0x148 0x438 0x7f0 0x2 0x0
-#define MX6SL_PAD_FEC_TX_EN__SD1_WP                0x148 0x438 0x82c 0x3 0x1
-#define MX6SL_PAD_FEC_TX_EN__SD3_WP                0x148 0x438 0x84c 0x4 0x1
-#define MX6SL_PAD_FEC_TX_EN__GPIO4_IO22            0x148 0x438 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_TX_EN__ARM_TRACE28           0x148 0x438 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0           0x14c 0x43c 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_TXD0__SD4_DATA3              0x14c 0x43c 0x868 0x1 0x1
-#define MX6SL_PAD_FEC_TXD0__AUD6_TXD               0x14c 0x43c 0x618 0x2 0x0
-#define MX6SL_PAD_FEC_TXD0__ECSPI4_SS2             0x14c 0x43c 0x6e4 0x3 0x1
-#define MX6SL_PAD_FEC_TXD0__GPT_CLKIN              0x14c 0x43c 0x718 0x4 0x0
-#define MX6SL_PAD_FEC_TXD0__GPIO4_IO24             0x14c 0x43c 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_TXD0__ARM_TRACE30            0x14c 0x43c 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1           0x150 0x440 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_TXD1__SD4_DATA7              0x150 0x440 0x878 0x1 0x0
-#define MX6SL_PAD_FEC_TXD1__SPDIF_OUT              0x150 0x440 0x000 0x2 0x0
-#define MX6SL_PAD_FEC_TXD1__SD1_CD_B               0x150 0x440 0x828 0x3 0x1
-#define MX6SL_PAD_FEC_TXD1__SD3_CD_B               0x150 0x440 0x838 0x4 0x1
-#define MX6SL_PAD_FEC_TXD1__GPIO4_IO16             0x150 0x440 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_TXD1__FEC_RX_CLK             0x150 0x440 0x700 0x6 0x0
-#define MX6SL_PAD_HSIC_DAT__USB_H_DATA             0x154 0x444 0x000 0x0 0x0
-#define MX6SL_PAD_HSIC_DAT__I2C1_SCL               0x154 0x444 0x71c 0x1 0x1
-#define MX6SL_PAD_HSIC_DAT__PWM1_OUT               0x154 0x444 0x000 0x2 0x0
-#define MX6SL_PAD_HSIC_DAT__XTALOSC_REF_CLK_24M    0x154 0x444 0x000 0x3 0x0
-#define MX6SL_PAD_HSIC_DAT__GPIO3_IO19             0x154 0x444 0x000 0x5 0x0
-#define MX6SL_PAD_HSIC_STROBE__USB_H_STROBE        0x158 0x448 0x000 0x0 0x0
-#define MX6SL_PAD_HSIC_STROBE__I2C1_SDA            0x158 0x448 0x720 0x1 0x1
-#define MX6SL_PAD_HSIC_STROBE__PWM2_OUT            0x158 0x448 0x000 0x2 0x0
-#define MX6SL_PAD_HSIC_STROBE__XTALOSC_REF_CLK_32K 0x158 0x448 0x000 0x3 0x0
-#define MX6SL_PAD_HSIC_STROBE__GPIO3_IO20          0x158 0x448 0x000 0x5 0x0
-#define MX6SL_PAD_I2C1_SCL__I2C1_SCL               0x15c 0x44c 0x71c 0x0 0x2
-#define MX6SL_PAD_I2C1_SCL__UART1_RTS_B            0x15c 0x44c 0x7f8 0x1 0x0
-#define MX6SL_PAD_I2C1_SCL__UART1_CTS_B            0x15c 0x44c 0x000 0x1 0x0
-#define MX6SL_PAD_I2C1_SCL__ECSPI3_SS2             0x15c 0x44c 0x6c8 0x2 0x1
-#define MX6SL_PAD_I2C1_SCL__FEC_RX_DATA0           0x15c 0x44c 0x6f8 0x3 0x1
-#define MX6SL_PAD_I2C1_SCL__SD3_RESET              0x15c 0x44c 0x000 0x4 0x0
-#define MX6SL_PAD_I2C1_SCL__GPIO3_IO12             0x15c 0x44c 0x000 0x5 0x0
-#define MX6SL_PAD_I2C1_SCL__ECSPI1_SS1             0x15c 0x44c 0x690 0x6 0x0
-#define MX6SL_PAD_I2C1_SDA__I2C1_SDA               0x160 0x450 0x720 0x0 0x2
-#define MX6SL_PAD_I2C1_SDA__UART1_CTS_B            0x160 0x450 0x000 0x1 0x0
-#define MX6SL_PAD_I2C1_SDA__UART1_RTS_B            0x160 0x450 0x7f8 0x1 0x1
-#define MX6SL_PAD_I2C1_SDA__ECSPI3_SS3             0x160 0x450 0x6cc 0x2 0x1
-#define MX6SL_PAD_I2C1_SDA__FEC_TX_EN              0x160 0x450 0x000 0x3 0x0
-#define MX6SL_PAD_I2C1_SDA__SD3_VSELECT            0x160 0x450 0x000 0x4 0x0
-#define MX6SL_PAD_I2C1_SDA__GPIO3_IO13             0x160 0x450 0x000 0x5 0x0
-#define MX6SL_PAD_I2C1_SDA__ECSPI1_SS2             0x160 0x450 0x694 0x6 0x0
-#define MX6SL_PAD_I2C2_SCL__I2C2_SCL               0x164 0x454 0x724 0x0 0x1
-#define MX6SL_PAD_I2C2_SCL__AUD4_RXFS              0x164 0x454 0x5f0 0x1 0x0
-#define MX6SL_PAD_I2C2_SCL__SPDIF_IN               0x164 0x454 0x7f0 0x2 0x1
-#define MX6SL_PAD_I2C2_SCL__FEC_TX_DATA1           0x164 0x454 0x000 0x3 0x0
-#define MX6SL_PAD_I2C2_SCL__SD3_WP                 0x164 0x454 0x84c 0x4 0x2
-#define MX6SL_PAD_I2C2_SCL__GPIO3_IO14             0x164 0x454 0x000 0x5 0x0
-#define MX6SL_PAD_I2C2_SCL__ECSPI1_RDY             0x164 0x454 0x680 0x6 0x0
-#define MX6SL_PAD_I2C2_SDA__I2C2_SDA               0x168 0x458 0x728 0x0 0x1
-#define MX6SL_PAD_I2C2_SDA__AUD4_RXC               0x168 0x458 0x5ec 0x1 0x0
-#define MX6SL_PAD_I2C2_SDA__SPDIF_OUT              0x168 0x458 0x000 0x2 0x0
-#define MX6SL_PAD_I2C2_SDA__FEC_REF_OUT            0x168 0x458 0x000 0x3 0x0
-#define MX6SL_PAD_I2C2_SDA__SD3_CD_B               0x168 0x458 0x838 0x4 0x2
-#define MX6SL_PAD_I2C2_SDA__GPIO3_IO15             0x168 0x458 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL0__KEY_COL0               0x16c 0x474 0x734 0x0 0x0
-#define MX6SL_PAD_KEY_COL0__I2C2_SCL               0x16c 0x474 0x724 0x1 0x2
-#define MX6SL_PAD_KEY_COL0__LCD_DATA00             0x16c 0x474 0x778 0x2 0x0
-#define MX6SL_PAD_KEY_COL0__EIM_AD00               0x16c 0x474 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL0__SD1_CD_B               0x16c 0x474 0x828 0x4 0x2
-#define MX6SL_PAD_KEY_COL0__GPIO3_IO24             0x16c 0x474 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL1__KEY_COL1               0x170 0x478 0x738 0x0 0x0
-#define MX6SL_PAD_KEY_COL1__ECSPI4_MOSI            0x170 0x478 0x6d8 0x1 0x2
-#define MX6SL_PAD_KEY_COL1__LCD_DATA02             0x170 0x478 0x780 0x2 0x0
-#define MX6SL_PAD_KEY_COL1__EIM_AD02               0x170 0x478 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL1__SD3_DATA4              0x170 0x478 0x83c 0x4 0x0
-#define MX6SL_PAD_KEY_COL1__GPIO3_IO26             0x170 0x478 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL2__KEY_COL2               0x174 0x47c 0x73c 0x0 0x0
-#define MX6SL_PAD_KEY_COL2__ECSPI4_SS0             0x174 0x47c 0x6dc 0x1 0x2
-#define MX6SL_PAD_KEY_COL2__LCD_DATA04             0x174 0x47c 0x788 0x2 0x0
-#define MX6SL_PAD_KEY_COL2__EIM_AD04               0x174 0x47c 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL2__SD3_DATA6              0x174 0x47c 0x844 0x4 0x0
-#define MX6SL_PAD_KEY_COL2__GPIO3_IO28             0x174 0x47c 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL3__KEY_COL3               0x178 0x480 0x740 0x0 0x0
-#define MX6SL_PAD_KEY_COL3__AUD6_RXFS              0x178 0x480 0x620 0x1 0x1
-#define MX6SL_PAD_KEY_COL3__LCD_DATA06             0x178 0x480 0x790 0x2 0x0
-#define MX6SL_PAD_KEY_COL3__EIM_AD06               0x178 0x480 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL3__SD4_DATA6              0x178 0x480 0x874 0x4 0x1
-#define MX6SL_PAD_KEY_COL3__GPIO3_IO30             0x178 0x480 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL3__SD1_RESET              0x178 0x480 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_COL4__KEY_COL4               0x17c 0x484 0x744 0x0 0x0
-#define MX6SL_PAD_KEY_COL4__AUD6_RXD               0x17c 0x484 0x614 0x1 0x1
-#define MX6SL_PAD_KEY_COL4__LCD_DATA08             0x17c 0x484 0x798 0x2 0x0
-#define MX6SL_PAD_KEY_COL4__EIM_AD08               0x17c 0x484 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL4__SD4_CLK                0x17c 0x484 0x850 0x4 0x2
-#define MX6SL_PAD_KEY_COL4__GPIO4_IO00             0x17c 0x484 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL4__USB_OTG1_PWR           0x17c 0x484 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_COL5__KEY_COL5               0x180 0x488 0x748 0x0 0x0
-#define MX6SL_PAD_KEY_COL5__AUD6_TXFS              0x180 0x488 0x628 0x1 0x1
-#define MX6SL_PAD_KEY_COL5__LCD_DATA10             0x180 0x488 0x7a0 0x2 0x0
-#define MX6SL_PAD_KEY_COL5__EIM_AD10               0x180 0x488 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL5__SD4_DATA0              0x180 0x488 0x85c 0x4 0x2
-#define MX6SL_PAD_KEY_COL5__GPIO4_IO02             0x180 0x488 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL5__USB_OTG2_PWR           0x180 0x488 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_COL6__KEY_COL6               0x184 0x48c 0x74c 0x0 0x0
-#define MX6SL_PAD_KEY_COL6__UART4_RX_DATA          0x184 0x48c 0x814 0x1 0x2
-#define MX6SL_PAD_KEY_COL6__UART4_TX_DATA          0x184 0x48c 0x000 0x1 0x0
-#define MX6SL_PAD_KEY_COL6__LCD_DATA12             0x184 0x48c 0x7a8 0x2 0x0
-#define MX6SL_PAD_KEY_COL6__EIM_AD12               0x184 0x48c 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL6__SD4_DATA2              0x184 0x48c 0x864 0x4 0x2
-#define MX6SL_PAD_KEY_COL6__GPIO4_IO04             0x184 0x48c 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL6__SD3_RESET              0x184 0x48c 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_COL7__KEY_COL7               0x188 0x490 0x750 0x0 0x0
-#define MX6SL_PAD_KEY_COL7__UART4_RTS_B            0x188 0x490 0x810 0x1 0x2
-#define MX6SL_PAD_KEY_COL7__UART4_CTS_B            0x188 0x490 0x000 0x1 0x0
-#define MX6SL_PAD_KEY_COL7__LCD_DATA14             0x188 0x490 0x7b0 0x2 0x0
-#define MX6SL_PAD_KEY_COL7__EIM_AD14               0x188 0x490 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL7__SD4_DATA4              0x188 0x490 0x86c 0x4 0x1
-#define MX6SL_PAD_KEY_COL7__GPIO4_IO06             0x188 0x490 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL7__SD1_WP                 0x188 0x490 0x82c 0x6 0x2
-#define MX6SL_PAD_KEY_ROW0__KEY_ROW0               0x18c 0x494 0x754 0x0 0x0
-#define MX6SL_PAD_KEY_ROW0__I2C2_SDA               0x18c 0x494 0x728 0x1 0x2
-#define MX6SL_PAD_KEY_ROW0__LCD_DATA01             0x18c 0x494 0x77c 0x2 0x0
-#define MX6SL_PAD_KEY_ROW0__EIM_AD01               0x18c 0x494 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW0__SD1_WP                 0x18c 0x494 0x82c 0x4 0x3
-#define MX6SL_PAD_KEY_ROW0__GPIO3_IO25             0x18c 0x494 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW1__KEY_ROW1               0x190 0x498 0x758 0x0 0x0
-#define MX6SL_PAD_KEY_ROW1__ECSPI4_MISO            0x190 0x498 0x6d4 0x1 0x2
-#define MX6SL_PAD_KEY_ROW1__LCD_DATA03             0x190 0x498 0x784 0x2 0x0
-#define MX6SL_PAD_KEY_ROW1__EIM_AD03               0x190 0x498 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW1__SD3_DATA5              0x190 0x498 0x840 0x4 0x0
-#define MX6SL_PAD_KEY_ROW1__GPIO3_IO27             0x190 0x498 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW2__KEY_ROW2               0x194 0x49c 0x75c 0x0 0x0
-#define MX6SL_PAD_KEY_ROW2__ECSPI4_SCLK            0x194 0x49c 0x6d0 0x1 0x2
-#define MX6SL_PAD_KEY_ROW2__LCD_DATA05             0x194 0x49c 0x78c 0x2 0x0
-#define MX6SL_PAD_KEY_ROW2__EIM_AD05               0x194 0x49c 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW2__SD3_DATA7              0x194 0x49c 0x848 0x4 0x0
-#define MX6SL_PAD_KEY_ROW2__GPIO3_IO29             0x194 0x49c 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW3__KEY_ROW3               0x198 0x4a0 0x760 0x0 0x0
-#define MX6SL_PAD_KEY_ROW3__AUD6_RXC               0x198 0x4a0 0x61c 0x1 0x1
-#define MX6SL_PAD_KEY_ROW3__LCD_DATA07             0x198 0x4a0 0x794 0x2 0x0
-#define MX6SL_PAD_KEY_ROW3__EIM_AD07               0x198 0x4a0 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW3__SD4_DATA7              0x198 0x4a0 0x878 0x4 0x1
-#define MX6SL_PAD_KEY_ROW3__GPIO3_IO31             0x198 0x4a0 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW3__SD1_VSELECT            0x198 0x4a0 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_ROW4__KEY_ROW4               0x19c 0x4a4 0x764 0x0 0x0
-#define MX6SL_PAD_KEY_ROW4__AUD6_TXC               0x19c 0x4a4 0x624 0x1 0x1
-#define MX6SL_PAD_KEY_ROW4__LCD_DATA09             0x19c 0x4a4 0x79c 0x2 0x0
-#define MX6SL_PAD_KEY_ROW4__EIM_AD09               0x19c 0x4a4 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW4__SD4_CMD                0x19c 0x4a4 0x858 0x4 0x2
-#define MX6SL_PAD_KEY_ROW4__GPIO4_IO01             0x19c 0x4a4 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW4__USB_OTG1_OC            0x19c 0x4a4 0x824 0x6 0x1
-#define MX6SL_PAD_KEY_ROW5__KEY_ROW5               0x1a0 0x4a8 0x768 0x0 0x0
-#define MX6SL_PAD_KEY_ROW5__AUD6_TXD               0x1a0 0x4a8 0x618 0x1 0x1
-#define MX6SL_PAD_KEY_ROW5__LCD_DATA11             0x1a0 0x4a8 0x7a4 0x2 0x0
-#define MX6SL_PAD_KEY_ROW5__EIM_AD11               0x1a0 0x4a8 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW5__SD4_DATA1              0x1a0 0x4a8 0x860 0x4 0x2
-#define MX6SL_PAD_KEY_ROW5__GPIO4_IO03             0x1a0 0x4a8 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW5__USB_OTG2_OC            0x1a0 0x4a8 0x820 0x6 0x2
-#define MX6SL_PAD_KEY_ROW6__KEY_ROW6               0x1a4 0x4ac 0x76c 0x0 0x0
-#define MX6SL_PAD_KEY_ROW6__UART4_TX_DATA          0x1a4 0x4ac 0x000 0x1 0x0
-#define MX6SL_PAD_KEY_ROW6__UART4_RX_DATA          0x1a4 0x4ac 0x814 0x1 0x3
-#define MX6SL_PAD_KEY_ROW6__LCD_DATA13             0x1a4 0x4ac 0x7ac 0x2 0x0
-#define MX6SL_PAD_KEY_ROW6__EIM_AD13               0x1a4 0x4ac 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW6__SD4_DATA3              0x1a4 0x4ac 0x868 0x4 0x2
-#define MX6SL_PAD_KEY_ROW6__GPIO4_IO05             0x1a4 0x4ac 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW6__SD3_VSELECT            0x1a4 0x4ac 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_ROW7__KEY_ROW7               0x1a8 0x4b0 0x770 0x0 0x0
-#define MX6SL_PAD_KEY_ROW7__UART4_CTS_B            0x1a8 0x4b0 0x000 0x1 0x0
-#define MX6SL_PAD_KEY_ROW7__UART4_RTS_B            0x1a8 0x4b0 0x810 0x1 0x3
-#define MX6SL_PAD_KEY_ROW7__LCD_DATA15             0x1a8 0x4b0 0x7b4 0x2 0x0
-#define MX6SL_PAD_KEY_ROW7__EIM_AD15               0x1a8 0x4b0 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW7__SD4_DATA5              0x1a8 0x4b0 0x870 0x4 0x1
-#define MX6SL_PAD_KEY_ROW7__GPIO4_IO07             0x1a8 0x4b0 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW7__SD1_CD_B               0x1a8 0x4b0 0x828 0x6 0x3
-#define MX6SL_PAD_LCD_CLK__LCD_CLK                 0x1ac 0x4b4 0x000 0x0 0x0
-#define MX6SL_PAD_LCD_CLK__SD4_DATA4               0x1ac 0x4b4 0x86c 0x1 0x2
-#define MX6SL_PAD_LCD_CLK__LCD_WR_RWN              0x1ac 0x4b4 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_CLK__EIM_RW                  0x1ac 0x4b4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_CLK__PWM4_OUT                0x1ac 0x4b4 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_CLK__GPIO2_IO15              0x1ac 0x4b4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT0__LCD_DATA00             0x1b0 0x4b8 0x778 0x0 0x1
-#define MX6SL_PAD_LCD_DAT0__ECSPI1_MOSI            0x1b0 0x4b8 0x688 0x1 0x1
-#define MX6SL_PAD_LCD_DAT0__USB_OTG2_ID            0x1b0 0x4b8 0x5e0 0x2 0x1
-#define MX6SL_PAD_LCD_DAT0__PWM1_OUT               0x1b0 0x4b8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT0__UART5_DTR_B            0x1b0 0x4b8 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT0__GPIO2_IO20             0x1b0 0x4b8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT0__ARM_TRACE00            0x1b0 0x4b8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT0__SRC_BOOT_CFG00         0x1b0 0x4b8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT1__LCD_DATA01             0x1b4 0x4bc 0x77c 0x0 0x1
-#define MX6SL_PAD_LCD_DAT1__ECSPI1_MISO            0x1b4 0x4bc 0x684 0x1 0x1
-#define MX6SL_PAD_LCD_DAT1__USB_OTG1_ID            0x1b4 0x4bc 0x5dc 0x2 0x2
-#define MX6SL_PAD_LCD_DAT1__PWM2_OUT               0x1b4 0x4bc 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT1__AUD4_RXFS              0x1b4 0x4bc 0x5f0 0x4 0x1
-#define MX6SL_PAD_LCD_DAT1__GPIO2_IO21             0x1b4 0x4bc 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT1__ARM_TRACE01            0x1b4 0x4bc 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT1__SRC_BOOT_CFG01         0x1b4 0x4bc 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT10__LCD_DATA10            0x1b8 0x4c0 0x7a0 0x0 0x1
-#define MX6SL_PAD_LCD_DAT10__KEY_COL1              0x1b8 0x4c0 0x738 0x1 0x1
-#define MX6SL_PAD_LCD_DAT10__CSI_DATA07            0x1b8 0x4c0 0x64c 0x2 0x1
-#define MX6SL_PAD_LCD_DAT10__EIM_DATA04            0x1b8 0x4c0 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT10__ECSPI2_MISO           0x1b8 0x4c0 0x6a0 0x4 0x2
-#define MX6SL_PAD_LCD_DAT10__GPIO2_IO30            0x1b8 0x4c0 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT10__ARM_TRACE10           0x1b8 0x4c0 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT10__SRC_BOOT_CFG10        0x1b8 0x4c0 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT11__LCD_DATA11            0x1bc 0x4c4 0x7a4 0x0 0x1
-#define MX6SL_PAD_LCD_DAT11__KEY_ROW1              0x1bc 0x4c4 0x758 0x1 0x1
-#define MX6SL_PAD_LCD_DAT11__CSI_DATA06            0x1bc 0x4c4 0x648 0x2 0x1
-#define MX6SL_PAD_LCD_DAT11__EIM_DATA05            0x1bc 0x4c4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT11__ECSPI2_SS1            0x1bc 0x4c4 0x6ac 0x4 0x1
-#define MX6SL_PAD_LCD_DAT11__GPIO2_IO31            0x1bc 0x4c4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT11__ARM_TRACE11           0x1bc 0x4c4 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT11__SRC_BOOT_CFG11        0x1bc 0x4c4 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT12__LCD_DATA12            0x1c0 0x4c8 0x7a8 0x0 0x1
-#define MX6SL_PAD_LCD_DAT12__KEY_COL2              0x1c0 0x4c8 0x73c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT12__CSI_DATA05            0x1c0 0x4c8 0x644 0x2 0x1
-#define MX6SL_PAD_LCD_DAT12__EIM_DATA06            0x1c0 0x4c8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT12__UART5_RTS_B           0x1c0 0x4c8 0x818 0x4 0x2
-#define MX6SL_PAD_LCD_DAT12__UART5_CTS_B           0x1c0 0x4c8 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT12__GPIO3_IO00            0x1c0 0x4c8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT12__ARM_TRACE12           0x1c0 0x4c8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT12__SRC_BOOT_CFG12        0x1c0 0x4c8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT13__LCD_DATA13            0x1c4 0x4cc 0x7ac 0x0 0x1
-#define MX6SL_PAD_LCD_DAT13__KEY_ROW2              0x1c4 0x4cc 0x75c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT13__CSI_DATA04            0x1c4 0x4cc 0x640 0x2 0x1
-#define MX6SL_PAD_LCD_DAT13__EIM_DATA07            0x1c4 0x4cc 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT13__UART5_CTS_B           0x1c4 0x4cc 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT13__UART5_RTS_B           0x1c4 0x4cc 0x818 0x4 0x3
-#define MX6SL_PAD_LCD_DAT13__GPIO3_IO01            0x1c4 0x4cc 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT13__ARM_TRACE13           0x1c4 0x4cc 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT13__SRC_BOOT_CFG13        0x1c4 0x4cc 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT14__LCD_DATA14            0x1c8 0x4d0 0x7b0 0x0 0x1
-#define MX6SL_PAD_LCD_DAT14__KEY_COL3              0x1c8 0x4d0 0x740 0x1 0x1
-#define MX6SL_PAD_LCD_DAT14__CSI_DATA03            0x1c8 0x4d0 0x63c 0x2 0x1
-#define MX6SL_PAD_LCD_DAT14__EIM_DATA08            0x1c8 0x4d0 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT14__UART5_RX_DATA         0x1c8 0x4d0 0x81c 0x4 0x2
-#define MX6SL_PAD_LCD_DAT14__UART5_TX_DATA         0x1c8 0x4d0 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT14__GPIO3_IO02            0x1c8 0x4d0 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT14__ARM_TRACE14           0x1c8 0x4d0 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT14__SRC_BOOT_CFG14        0x1c8 0x4d0 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT15__LCD_DATA15            0x1cc 0x4d4 0x7b4 0x0 0x1
-#define MX6SL_PAD_LCD_DAT15__KEY_ROW3              0x1cc 0x4d4 0x760 0x1 0x1
-#define MX6SL_PAD_LCD_DAT15__CSI_DATA02            0x1cc 0x4d4 0x638 0x2 0x1
-#define MX6SL_PAD_LCD_DAT15__EIM_DATA09            0x1cc 0x4d4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT15__UART5_TX_DATA         0x1cc 0x4d4 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT15__UART5_RX_DATA         0x1cc 0x4d4 0x81c 0x4 0x3
-#define MX6SL_PAD_LCD_DAT15__GPIO3_IO03            0x1cc 0x4d4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT15__ARM_TRACE15           0x1cc 0x4d4 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT15__SRC_BOOT_CFG15        0x1cc 0x4d4 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT16__LCD_DATA16            0x1d0 0x4d8 0x7b8 0x0 0x1
-#define MX6SL_PAD_LCD_DAT16__KEY_COL4              0x1d0 0x4d8 0x744 0x1 0x1
-#define MX6SL_PAD_LCD_DAT16__CSI_DATA01            0x1d0 0x4d8 0x634 0x2 0x1
-#define MX6SL_PAD_LCD_DAT16__EIM_DATA10            0x1d0 0x4d8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT16__I2C2_SCL              0x1d0 0x4d8 0x724 0x4 0x3
-#define MX6SL_PAD_LCD_DAT16__GPIO3_IO04            0x1d0 0x4d8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT16__ARM_TRACE16           0x1d0 0x4d8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT16__SRC_BOOT_CFG24        0x1d0 0x4d8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT17__LCD_DATA17            0x1d4 0x4dc 0x7bc 0x0 0x1
-#define MX6SL_PAD_LCD_DAT17__KEY_ROW4              0x1d4 0x4dc 0x764 0x1 0x1
-#define MX6SL_PAD_LCD_DAT17__CSI_DATA00            0x1d4 0x4dc 0x630 0x2 0x1
-#define MX6SL_PAD_LCD_DAT17__EIM_DATA11            0x1d4 0x4dc 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT17__I2C2_SDA              0x1d4 0x4dc 0x728 0x4 0x3
-#define MX6SL_PAD_LCD_DAT17__GPIO3_IO05            0x1d4 0x4dc 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT17__ARM_TRACE17           0x1d4 0x4dc 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT17__SRC_BOOT_CFG25        0x1d4 0x4dc 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT18__LCD_DATA18            0x1d8 0x4e0 0x7c0 0x0 0x1
-#define MX6SL_PAD_LCD_DAT18__KEY_COL5              0x1d8 0x4e0 0x748 0x1 0x1
-#define MX6SL_PAD_LCD_DAT18__CSI_DATA15            0x1d8 0x4e0 0x66c 0x2 0x0
-#define MX6SL_PAD_LCD_DAT18__EIM_DATA12            0x1d8 0x4e0 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT18__GPT_CAPTURE1          0x1d8 0x4e0 0x710 0x4 0x1
-#define MX6SL_PAD_LCD_DAT18__GPIO3_IO06            0x1d8 0x4e0 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT18__ARM_TRACE18           0x1d8 0x4e0 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT18__SRC_BOOT_CFG26        0x1d8 0x4e0 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT19__LCD_DATA19            0x1dc 0x4e4 0x7c4 0x0 0x1
-#define MX6SL_PAD_LCD_DAT19__KEY_ROW5              0x1dc 0x4e4 0x768 0x1 0x1
-#define MX6SL_PAD_LCD_DAT19__CSI_DATA14            0x1dc 0x4e4 0x668 0x2 0x0
-#define MX6SL_PAD_LCD_DAT19__EIM_DATA13            0x1dc 0x4e4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT19__GPT_CAPTURE2          0x1dc 0x4e4 0x714 0x4 0x1
-#define MX6SL_PAD_LCD_DAT19__GPIO3_IO07            0x1dc 0x4e4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT19__ARM_TRACE19           0x1dc 0x4e4 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT19__SRC_BOOT_CFG27        0x1dc 0x4e4 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT2__LCD_DATA02             0x1e0 0x4e8 0x780 0x0 0x1
-#define MX6SL_PAD_LCD_DAT2__ECSPI1_SS0             0x1e0 0x4e8 0x68c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT2__EPIT2_OUT              0x1e0 0x4e8 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_DAT2__PWM3_OUT               0x1e0 0x4e8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT2__AUD4_RXC               0x1e0 0x4e8 0x5ec 0x4 0x1
-#define MX6SL_PAD_LCD_DAT2__GPIO2_IO22             0x1e0 0x4e8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT2__ARM_TRACE02            0x1e0 0x4e8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT2__SRC_BOOT_CFG02         0x1e0 0x4e8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT20__LCD_DATA20            0x1e4 0x4ec 0x7c8 0x0 0x1
-#define MX6SL_PAD_LCD_DAT20__KEY_COL6              0x1e4 0x4ec 0x74c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT20__CSI_DATA13            0x1e4 0x4ec 0x664 0x2 0x0
-#define MX6SL_PAD_LCD_DAT20__EIM_DATA14            0x1e4 0x4ec 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT20__GPT_COMPARE1          0x1e4 0x4ec 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT20__GPIO3_IO08            0x1e4 0x4ec 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT20__ARM_TRACE20           0x1e4 0x4ec 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT20__SRC_BOOT_CFG28        0x1e4 0x4ec 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT21__LCD_DATA21            0x1e8 0x4f0 0x7cc 0x0 0x1
-#define MX6SL_PAD_LCD_DAT21__KEY_ROW6              0x1e8 0x4f0 0x76c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT21__CSI_DATA12            0x1e8 0x4f0 0x660 0x2 0x0
-#define MX6SL_PAD_LCD_DAT21__EIM_DATA15            0x1e8 0x4f0 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT21__GPT_COMPARE2          0x1e8 0x4f0 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT21__GPIO3_IO09            0x1e8 0x4f0 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT21__ARM_TRACE21           0x1e8 0x4f0 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT21__SRC_BOOT_CFG29        0x1e8 0x4f0 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT22__LCD_DATA22            0x1ec 0x4f4 0x7d0 0x0 0x1
-#define MX6SL_PAD_LCD_DAT22__KEY_COL7              0x1ec 0x4f4 0x750 0x1 0x1
-#define MX6SL_PAD_LCD_DAT22__CSI_DATA11            0x1ec 0x4f4 0x65c 0x2 0x1
-#define MX6SL_PAD_LCD_DAT22__EIM_EB3_B             0x1ec 0x4f4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT22__GPT_COMPARE3          0x1ec 0x4f4 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT22__GPIO3_IO10            0x1ec 0x4f4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT22__ARM_TRACE22           0x1ec 0x4f4 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT22__SRC_BOOT_CFG30        0x1ec 0x4f4 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT23__LCD_DATA23            0x1f0 0x4f8 0x7d4 0x0 0x1
-#define MX6SL_PAD_LCD_DAT23__KEY_ROW7              0x1f0 0x4f8 0x770 0x1 0x1
-#define MX6SL_PAD_LCD_DAT23__CSI_DATA10            0x1f0 0x4f8 0x658 0x2 0x1
-#define MX6SL_PAD_LCD_DAT23__EIM_EB2_B             0x1f0 0x4f8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT23__GPT_CLKIN             0x1f0 0x4f8 0x718 0x4 0x1
-#define MX6SL_PAD_LCD_DAT23__GPIO3_IO11            0x1f0 0x4f8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT23__ARM_TRACE23           0x1f0 0x4f8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT23__SRC_BOOT_CFG31        0x1f0 0x4f8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT3__LCD_DATA03             0x1f4 0x4fc 0x784 0x0 0x1
-#define MX6SL_PAD_LCD_DAT3__ECSPI1_SCLK            0x1f4 0x4fc 0x67c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT3__UART5_DSR_B            0x1f4 0x4fc 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_DAT3__PWM4_OUT               0x1f4 0x4fc 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT3__AUD4_RXD               0x1f4 0x4fc 0x5e4 0x4 0x1
-#define MX6SL_PAD_LCD_DAT3__GPIO2_IO23             0x1f4 0x4fc 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT3__ARM_TRACE03            0x1f4 0x4fc 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT3__SRC_BOOT_CFG03         0x1f4 0x4fc 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT4__LCD_DATA04             0x1f8 0x500 0x788 0x0 0x1
-#define MX6SL_PAD_LCD_DAT4__ECSPI1_SS1             0x1f8 0x500 0x690 0x1 0x1
-#define MX6SL_PAD_LCD_DAT4__CSI_VSYNC              0x1f8 0x500 0x678 0x2 0x2
-#define MX6SL_PAD_LCD_DAT4__WDOG2_RESET_B_DEB      0x1f8 0x500 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT4__AUD4_TXC               0x1f8 0x500 0x5f4 0x4 0x1
-#define MX6SL_PAD_LCD_DAT4__GPIO2_IO24             0x1f8 0x500 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT4__ARM_TRACE04            0x1f8 0x500 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT4__SRC_BOOT_CFG04         0x1f8 0x500 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT5__LCD_DATA05             0x1fc 0x504 0x78c 0x0 0x1
-#define MX6SL_PAD_LCD_DAT5__ECSPI1_SS2             0x1fc 0x504 0x694 0x1 0x1
-#define MX6SL_PAD_LCD_DAT5__CSI_HSYNC              0x1fc 0x504 0x670 0x2 0x2
-#define MX6SL_PAD_LCD_DAT5__EIM_CS3_B              0x1fc 0x504 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT5__AUD4_TXFS              0x1fc 0x504 0x5f8 0x4 0x1
-#define MX6SL_PAD_LCD_DAT5__GPIO2_IO25             0x1fc 0x504 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT5__ARM_TRACE05            0x1fc 0x504 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT5__SRC_BOOT_CFG05         0x1fc 0x504 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT6__LCD_DATA06             0x200 0x508 0x790 0x0 0x1
-#define MX6SL_PAD_LCD_DAT6__ECSPI1_SS3             0x200 0x508 0x698 0x1 0x1
-#define MX6SL_PAD_LCD_DAT6__CSI_PIXCLK             0x200 0x508 0x674 0x2 0x2
-#define MX6SL_PAD_LCD_DAT6__EIM_DATA00             0x200 0x508 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT6__AUD4_TXD               0x200 0x508 0x5e8 0x4 0x1
-#define MX6SL_PAD_LCD_DAT6__GPIO2_IO26             0x200 0x508 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT6__ARM_TRACE06            0x200 0x508 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT6__SRC_BOOT_CFG06         0x200 0x508 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT7__LCD_DATA07             0x204 0x50c 0x794 0x0 0x1
-#define MX6SL_PAD_LCD_DAT7__ECSPI1_RDY             0x204 0x50c 0x680 0x1 0x1
-#define MX6SL_PAD_LCD_DAT7__CSI_MCLK               0x204 0x50c 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_DAT7__EIM_DATA01             0x204 0x50c 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT7__AUDIO_CLK_OUT          0x204 0x50c 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT7__GPIO2_IO27             0x204 0x50c 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT7__ARM_TRACE07            0x204 0x50c 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT7__SRC_BOOT_CFG07         0x204 0x50c 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT8__LCD_DATA08             0x208 0x510 0x798 0x0 0x1
-#define MX6SL_PAD_LCD_DAT8__KEY_COL0               0x208 0x510 0x734 0x1 0x1
-#define MX6SL_PAD_LCD_DAT8__CSI_DATA09             0x208 0x510 0x654 0x2 0x1
-#define MX6SL_PAD_LCD_DAT8__EIM_DATA02             0x208 0x510 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT8__ECSPI2_SCLK            0x208 0x510 0x69c 0x4 0x2
-#define MX6SL_PAD_LCD_DAT8__GPIO2_IO28             0x208 0x510 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT8__ARM_TRACE08            0x208 0x510 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT8__SRC_BOOT_CFG08         0x208 0x510 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT9__LCD_DATA09             0x20c 0x514 0x79c 0x0 0x1
-#define MX6SL_PAD_LCD_DAT9__KEY_ROW0               0x20c 0x514 0x754 0x1 0x1
-#define MX6SL_PAD_LCD_DAT9__CSI_DATA08             0x20c 0x514 0x650 0x2 0x1
-#define MX6SL_PAD_LCD_DAT9__EIM_DATA03             0x20c 0x514 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT9__ECSPI2_MOSI            0x20c 0x514 0x6a4 0x4 0x2
-#define MX6SL_PAD_LCD_DAT9__GPIO2_IO29             0x20c 0x514 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT9__ARM_TRACE09            0x20c 0x514 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT9__SRC_BOOT_CFG09         0x20c 0x514 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_ENABLE__LCD_ENABLE           0x210 0x518 0x000 0x0 0x0
-#define MX6SL_PAD_LCD_ENABLE__SD4_DATA5            0x210 0x518 0x870 0x1 0x2
-#define MX6SL_PAD_LCD_ENABLE__LCD_RD_E             0x210 0x518 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_ENABLE__EIM_OE_B             0x210 0x518 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_ENABLE__UART2_RX_DATA        0x210 0x518 0x804 0x4 0x2
-#define MX6SL_PAD_LCD_ENABLE__UART2_TX_DATA        0x210 0x518 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_ENABLE__GPIO2_IO16           0x210 0x518 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_HSYNC__LCD_HSYNC             0x214 0x51c 0x774 0x0 0x0
-#define MX6SL_PAD_LCD_HSYNC__SD4_DATA6             0x214 0x51c 0x874 0x1 0x2
-#define MX6SL_PAD_LCD_HSYNC__LCD_CS                0x214 0x51c 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_HSYNC__EIM_CS0_B             0x214 0x51c 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_HSYNC__UART2_TX_DATA         0x214 0x51c 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_HSYNC__UART2_RX_DATA         0x214 0x51c 0x804 0x4 0x3
-#define MX6SL_PAD_LCD_HSYNC__GPIO2_IO17            0x214 0x51c 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_HSYNC__ARM_TRACE_CLK         0x214 0x51c 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_RESET__LCD_RESET             0x218 0x520 0x000 0x0 0x0
-#define MX6SL_PAD_LCD_RESET__EIM_DTACK_B           0x218 0x520 0x880 0x1 0x1
-#define MX6SL_PAD_LCD_RESET__LCD_BUSY              0x218 0x520 0x774 0x2 0x1
-#define MX6SL_PAD_LCD_RESET__EIM_WAIT_B            0x218 0x520 0x884 0x3 0x1
-#define MX6SL_PAD_LCD_RESET__UART2_CTS_B           0x218 0x520 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_RESET__UART2_RTS_B           0x218 0x520 0x800 0x4 0x2
-#define MX6SL_PAD_LCD_RESET__GPIO2_IO19            0x218 0x520 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_RESET__CCM_PMIC_READY        0x218 0x520 0x62c 0x6 0x1
-#define MX6SL_PAD_LCD_VSYNC__LCD_VSYNC             0x21c 0x524 0x000 0x0 0x0
-#define MX6SL_PAD_LCD_VSYNC__SD4_DATA7             0x21c 0x524 0x878 0x1 0x2
-#define MX6SL_PAD_LCD_VSYNC__LCD_RS                0x21c 0x524 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_VSYNC__EIM_CS1_B             0x21c 0x524 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_VSYNC__UART2_RTS_B           0x21c 0x524 0x800 0x4 0x3
-#define MX6SL_PAD_LCD_VSYNC__UART2_CTS_B           0x21c 0x524 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_VSYNC__GPIO2_IO18            0x21c 0x524 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_VSYNC__ARM_TRACE_CTL         0x21c 0x524 0x000 0x6 0x0
-#define MX6SL_PAD_PWM1__PWM1_OUT                   0x220 0x528 0x000 0x0 0x0
-#define MX6SL_PAD_PWM1__CCM_CLKO                   0x220 0x528 0x000 0x1 0x0
-#define MX6SL_PAD_PWM1__AUDIO_CLK_OUT              0x220 0x528 0x000 0x2 0x0
-#define MX6SL_PAD_PWM1__FEC_REF_OUT                0x220 0x528 0x000 0x3 0x0
-#define MX6SL_PAD_PWM1__CSI_MCLK                   0x220 0x528 0x000 0x4 0x0
-#define MX6SL_PAD_PWM1__GPIO3_IO23                 0x220 0x528 0x000 0x5 0x0
-#define MX6SL_PAD_PWM1__EPIT1_OUT                  0x220 0x528 0x000 0x6 0x0
-#define MX6SL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x224 0x52c 0x000 0x0 0x0
-#define MX6SL_PAD_REF_CLK_24M__I2C3_SCL            0x224 0x52c 0x72c 0x1 0x2
-#define MX6SL_PAD_REF_CLK_24M__PWM3_OUT            0x224 0x52c 0x000 0x2 0x0
-#define MX6SL_PAD_REF_CLK_24M__USB_OTG2_ID         0x224 0x52c 0x5e0 0x3 0x2
-#define MX6SL_PAD_REF_CLK_24M__CCM_PMIC_READY      0x224 0x52c 0x62c 0x4 0x2
-#define MX6SL_PAD_REF_CLK_24M__GPIO3_IO21          0x224 0x52c 0x000 0x5 0x0
-#define MX6SL_PAD_REF_CLK_24M__SD3_WP              0x224 0x52c 0x84c 0x6 0x3
-#define MX6SL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x228 0x530 0x000 0x0 0x0
-#define MX6SL_PAD_REF_CLK_32K__I2C3_SDA            0x228 0x530 0x730 0x1 0x2
-#define MX6SL_PAD_REF_CLK_32K__PWM4_OUT            0x228 0x530 0x000 0x2 0x0
-#define MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID         0x228 0x530 0x5dc 0x3 0x3
-#define MX6SL_PAD_REF_CLK_32K__SD1_LCTL            0x228 0x530 0x000 0x4 0x0
-#define MX6SL_PAD_REF_CLK_32K__GPIO3_IO22          0x228 0x530 0x000 0x5 0x0
-#define MX6SL_PAD_REF_CLK_32K__SD3_CD_B            0x228 0x530 0x838 0x6 0x3
-#define MX6SL_PAD_SD1_CLK__SD1_CLK                 0x22c 0x534 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_CLK__FEC_MDIO                0x22c 0x534 0x6f4 0x1 0x2
-#define MX6SL_PAD_SD1_CLK__KEY_COL0                0x22c 0x534 0x734 0x2 0x2
-#define MX6SL_PAD_SD1_CLK__EPDC_SDCE4              0x22c 0x534 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_CLK__GPIO5_IO15              0x22c 0x534 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_CMD__SD1_CMD                 0x230 0x538 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_CMD__FEC_TX_CLK              0x230 0x538 0x70c 0x1 0x2
-#define MX6SL_PAD_SD1_CMD__KEY_ROW0                0x230 0x538 0x754 0x2 0x2
-#define MX6SL_PAD_SD1_CMD__EPDC_SDCE5              0x230 0x538 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_CMD__GPIO5_IO14              0x230 0x538 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT0__SD1_DATA0              0x234 0x53c 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT0__FEC_RX_ER              0x234 0x53c 0x708 0x1 0x2
-#define MX6SL_PAD_SD1_DAT0__KEY_COL1               0x234 0x53c 0x738 0x2 0x2
-#define MX6SL_PAD_SD1_DAT0__EPDC_SDCE6             0x234 0x53c 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT0__GPIO5_IO11             0x234 0x53c 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT1__SD1_DATA1              0x238 0x540 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT1__FEC_RX_DV              0x238 0x540 0x704 0x1 0x2
-#define MX6SL_PAD_SD1_DAT1__KEY_ROW1               0x238 0x540 0x758 0x2 0x2
-#define MX6SL_PAD_SD1_DAT1__EPDC_SDCE7             0x238 0x540 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT1__GPIO5_IO08             0x238 0x540 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT2__SD1_DATA2              0x23c 0x544 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT2__FEC_RX_DATA1           0x23c 0x544 0x6fc 0x1 0x2
-#define MX6SL_PAD_SD1_DAT2__KEY_COL2               0x23c 0x544 0x73c 0x2 0x2
-#define MX6SL_PAD_SD1_DAT2__EPDC_SDCE8             0x23c 0x544 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT2__GPIO5_IO13             0x23c 0x544 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT3__SD1_DATA3              0x240 0x548 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT3__FEC_TX_DATA0           0x240 0x548 0x000 0x1 0x0
-#define MX6SL_PAD_SD1_DAT3__KEY_ROW2               0x240 0x548 0x75c 0x2 0x2
-#define MX6SL_PAD_SD1_DAT3__EPDC_SDCE9             0x240 0x548 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT3__GPIO5_IO06             0x240 0x548 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT4__SD1_DATA4              0x244 0x54c 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT4__FEC_MDC                0x244 0x54c 0x000 0x1 0x0
-#define MX6SL_PAD_SD1_DAT4__KEY_COL3               0x244 0x54c 0x740 0x2 0x2
-#define MX6SL_PAD_SD1_DAT4__EPDC_SDCLK_N           0x244 0x54c 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT4__UART4_RX_DATA          0x244 0x54c 0x814 0x4 0x4
-#define MX6SL_PAD_SD1_DAT4__UART4_TX_DATA          0x244 0x54c 0x000 0x4 0x0
-#define MX6SL_PAD_SD1_DAT4__GPIO5_IO12             0x244 0x54c 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT5__SD1_DATA5              0x248 0x550 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT5__FEC_RX_DATA0           0x248 0x550 0x6f8 0x1 0x2
-#define MX6SL_PAD_SD1_DAT5__KEY_ROW3               0x248 0x550 0x760 0x2 0x2
-#define MX6SL_PAD_SD1_DAT5__EPDC_SDOED             0x248 0x550 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT5__UART4_TX_DATA          0x248 0x550 0x000 0x4 0x0
-#define MX6SL_PAD_SD1_DAT5__UART4_RX_DATA          0x248 0x550 0x814 0x4 0x5
-#define MX6SL_PAD_SD1_DAT5__GPIO5_IO09             0x248 0x550 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT6__SD1_DATA6              0x24c 0x554 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT6__FEC_TX_EN              0x24c 0x554 0x000 0x1 0x0
-#define MX6SL_PAD_SD1_DAT6__KEY_COL4               0x24c 0x554 0x744 0x2 0x2
-#define MX6SL_PAD_SD1_DAT6__EPDC_SDOEZ             0x24c 0x554 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT6__UART4_RTS_B            0x24c 0x554 0x810 0x4 0x4
-#define MX6SL_PAD_SD1_DAT6__UART4_CTS_B            0x24c 0x554 0x000 0x4 0x0
-#define MX6SL_PAD_SD1_DAT6__GPIO5_IO07             0x24c 0x554 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT7__SD1_DATA7              0x250 0x558 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT7__FEC_TX_DATA1           0x250 0x558 0x000 0x1 0x0
-#define MX6SL_PAD_SD1_DAT7__KEY_ROW4               0x250 0x558 0x764 0x2 0x2
-#define MX6SL_PAD_SD1_DAT7__CCM_PMIC_READY         0x250 0x558 0x62c 0x3 0x3
-#define MX6SL_PAD_SD1_DAT7__UART4_CTS_B            0x250 0x558 0x000 0x4 0x0
-#define MX6SL_PAD_SD1_DAT7__UART4_RTS_B            0x250 0x558 0x810 0x4 0x5
-#define MX6SL_PAD_SD1_DAT7__GPIO5_IO10             0x250 0x558 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_CLK__SD2_CLK                 0x254 0x55c 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_CLK__AUD4_RXFS               0x254 0x55c 0x5f0 0x1 0x2
-#define MX6SL_PAD_SD2_CLK__ECSPI3_SCLK             0x254 0x55c 0x6b0 0x2 0x2
-#define MX6SL_PAD_SD2_CLK__CSI_DATA00              0x254 0x55c 0x630 0x3 0x2
-#define MX6SL_PAD_SD2_CLK__GPIO5_IO05              0x254 0x55c 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_CMD__SD2_CMD                 0x258 0x560 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_CMD__AUD4_RXC                0x258 0x560 0x5ec 0x1 0x2
-#define MX6SL_PAD_SD2_CMD__ECSPI3_SS0              0x258 0x560 0x6c0 0x2 0x2
-#define MX6SL_PAD_SD2_CMD__CSI_DATA01              0x258 0x560 0x634 0x3 0x2
-#define MX6SL_PAD_SD2_CMD__EPIT1_OUT               0x258 0x560 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_CMD__GPIO5_IO04              0x258 0x560 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT0__SD2_DATA0              0x25c 0x564 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT0__AUD4_RXD               0x25c 0x564 0x5e4 0x1 0x2
-#define MX6SL_PAD_SD2_DAT0__ECSPI3_MOSI            0x25c 0x564 0x6bc 0x2 0x2
-#define MX6SL_PAD_SD2_DAT0__CSI_DATA02             0x25c 0x564 0x638 0x3 0x2
-#define MX6SL_PAD_SD2_DAT0__UART5_RTS_B            0x25c 0x564 0x818 0x4 0x4
-#define MX6SL_PAD_SD2_DAT0__UART5_CTS_B            0x25c 0x564 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT0__GPIO5_IO01             0x25c 0x564 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT1__SD2_DATA1              0x260 0x568 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT1__AUD4_TXC               0x260 0x568 0x5f4 0x1 0x2
-#define MX6SL_PAD_SD2_DAT1__ECSPI3_MISO            0x260 0x568 0x6b8 0x2 0x2
-#define MX6SL_PAD_SD2_DAT1__CSI_DATA03             0x260 0x568 0x63c 0x3 0x2
-#define MX6SL_PAD_SD2_DAT1__UART5_CTS_B            0x260 0x568 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT1__UART5_RTS_B            0x260 0x568 0x818 0x4 0x5
-#define MX6SL_PAD_SD2_DAT1__GPIO4_IO30             0x260 0x568 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT2__SD2_DATA2              0x264 0x56c 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT2__AUD4_TXFS              0x264 0x56c 0x5f8 0x1 0x2
-#define MX6SL_PAD_SD2_DAT2__FEC_COL                0x264 0x56c 0x6f0 0x2 0x1
-#define MX6SL_PAD_SD2_DAT2__CSI_DATA04             0x264 0x56c 0x640 0x3 0x2
-#define MX6SL_PAD_SD2_DAT2__UART5_RX_DATA          0x264 0x56c 0x81c 0x4 0x4
-#define MX6SL_PAD_SD2_DAT2__UART5_TX_DATA          0x264 0x56c 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT2__GPIO5_IO03             0x264 0x56c 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT3__SD2_DATA3              0x268 0x570 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT3__AUD4_TXD               0x268 0x570 0x5e8 0x1 0x2
-#define MX6SL_PAD_SD2_DAT3__FEC_RX_CLK             0x268 0x570 0x700 0x2 0x1
-#define MX6SL_PAD_SD2_DAT3__CSI_DATA05             0x268 0x570 0x644 0x3 0x2
-#define MX6SL_PAD_SD2_DAT3__UART5_TX_DATA          0x268 0x570 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT3__UART5_RX_DATA          0x268 0x570 0x81c 0x4 0x5
-#define MX6SL_PAD_SD2_DAT3__GPIO4_IO28             0x268 0x570 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT4__SD2_DATA4              0x26c 0x574 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT4__SD3_DATA4              0x26c 0x574 0x83c 0x1 0x1
-#define MX6SL_PAD_SD2_DAT4__UART2_RX_DATA          0x26c 0x574 0x804 0x2 0x4
-#define MX6SL_PAD_SD2_DAT4__UART2_TX_DATA          0x26c 0x574 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_DAT4__CSI_DATA06             0x26c 0x574 0x648 0x3 0x2
-#define MX6SL_PAD_SD2_DAT4__SPDIF_OUT              0x26c 0x574 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT4__GPIO5_IO02             0x26c 0x574 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT5__SD2_DATA5              0x270 0x578 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT5__SD3_DATA5              0x270 0x578 0x840 0x1 0x1
-#define MX6SL_PAD_SD2_DAT5__UART2_TX_DATA          0x270 0x578 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_DAT5__UART2_RX_DATA          0x270 0x578 0x804 0x2 0x5
-#define MX6SL_PAD_SD2_DAT5__CSI_DATA07             0x270 0x578 0x64c 0x3 0x2
-#define MX6SL_PAD_SD2_DAT5__SPDIF_IN               0x270 0x578 0x7f0 0x4 0x2
-#define MX6SL_PAD_SD2_DAT5__GPIO4_IO31             0x270 0x578 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT6__SD2_DATA6              0x274 0x57c 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT6__SD3_DATA6              0x274 0x57c 0x844 0x1 0x1
-#define MX6SL_PAD_SD2_DAT6__UART2_RTS_B            0x274 0x57c 0x800 0x2 0x4
-#define MX6SL_PAD_SD2_DAT6__UART2_CTS_B            0x274 0x57c 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_DAT6__CSI_DATA08             0x274 0x57c 0x650 0x3 0x2
-#define MX6SL_PAD_SD2_DAT6__SD2_WP                 0x274 0x57c 0x834 0x4 0x2
-#define MX6SL_PAD_SD2_DAT6__GPIO4_IO29             0x274 0x57c 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT7__SD2_DATA7              0x278 0x580 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT7__SD3_DATA7              0x278 0x580 0x848 0x1 0x1
-#define MX6SL_PAD_SD2_DAT7__UART2_CTS_B            0x278 0x580 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_DAT7__UART2_RTS_B            0x278 0x580 0x800 0x2 0x5
-#define MX6SL_PAD_SD2_DAT7__CSI_DATA09             0x278 0x580 0x654 0x3 0x2
-#define MX6SL_PAD_SD2_DAT7__SD2_CD_B               0x278 0x580 0x830 0x4 0x2
-#define MX6SL_PAD_SD2_DAT7__GPIO5_IO00             0x278 0x580 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_RST__SD2_RESET               0x27c 0x584 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_RST__FEC_REF_OUT             0x27c 0x584 0x000 0x1 0x0
-#define MX6SL_PAD_SD2_RST__WDOG2_B                 0x27c 0x584 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_RST__SPDIF_OUT               0x27c 0x584 0x000 0x3 0x0
-#define MX6SL_PAD_SD2_RST__CSI_MCLK                0x27c 0x584 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_RST__GPIO4_IO27              0x27c 0x584 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_CLK__SD3_CLK                 0x280 0x588 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_CLK__AUD5_RXFS               0x280 0x588 0x608 0x1 0x1
-#define MX6SL_PAD_SD3_CLK__KEY_COL5                0x280 0x588 0x748 0x2 0x2
-#define MX6SL_PAD_SD3_CLK__CSI_DATA10              0x280 0x588 0x658 0x3 0x2
-#define MX6SL_PAD_SD3_CLK__WDOG1_RESET_B_DEB       0x280 0x588 0x000 0x4 0x0
-#define MX6SL_PAD_SD3_CLK__GPIO5_IO18              0x280 0x588 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_CLK__USB_OTG1_PWR            0x280 0x588 0x000 0x6 0x0
-#define MX6SL_PAD_SD3_CMD__SD3_CMD                 0x284 0x58c 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_CMD__AUD5_RXC                0x284 0x58c 0x604 0x1 0x1
-#define MX6SL_PAD_SD3_CMD__KEY_ROW5                0x284 0x58c 0x768 0x2 0x2
-#define MX6SL_PAD_SD3_CMD__CSI_DATA11              0x284 0x58c 0x65c 0x3 0x2
-#define MX6SL_PAD_SD3_CMD__USB_OTG2_ID             0x284 0x58c 0x5e0 0x4 0x3
-#define MX6SL_PAD_SD3_CMD__GPIO5_IO21              0x284 0x58c 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_CMD__USB_OTG2_PWR            0x284 0x58c 0x000 0x6 0x0
-#define MX6SL_PAD_SD3_DAT0__SD3_DATA0              0x288 0x590 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_DAT0__AUD5_RXD               0x288 0x590 0x5fc 0x1 0x1
-#define MX6SL_PAD_SD3_DAT0__KEY_COL6               0x288 0x590 0x74c 0x2 0x2
-#define MX6SL_PAD_SD3_DAT0__CSI_DATA12             0x288 0x590 0x660 0x3 0x1
-#define MX6SL_PAD_SD3_DAT0__USB_OTG1_ID            0x288 0x590 0x5dc 0x4 0x4
-#define MX6SL_PAD_SD3_DAT0__GPIO5_IO19             0x288 0x590 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_DAT1__SD3_DATA1              0x28c 0x594 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_DAT1__AUD5_TXC               0x28c 0x594 0x60c 0x1 0x1
-#define MX6SL_PAD_SD3_DAT1__KEY_ROW6               0x28c 0x594 0x76c 0x2 0x2
-#define MX6SL_PAD_SD3_DAT1__CSI_DATA13             0x28c 0x594 0x664 0x3 0x1
-#define MX6SL_PAD_SD3_DAT1__SD1_VSELECT            0x28c 0x594 0x000 0x4 0x0
-#define MX6SL_PAD_SD3_DAT1__GPIO5_IO20             0x28c 0x594 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_DAT1__JTAG_DE_B              0x28c 0x594 0x000 0x6 0x0
-#define MX6SL_PAD_SD3_DAT2__SD3_DATA2              0x290 0x598 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_DAT2__AUD5_TXFS              0x290 0x598 0x610 0x1 0x1
-#define MX6SL_PAD_SD3_DAT2__KEY_COL7               0x290 0x598 0x750 0x2 0x2
-#define MX6SL_PAD_SD3_DAT2__CSI_DATA14             0x290 0x598 0x668 0x3 0x1
-#define MX6SL_PAD_SD3_DAT2__EPIT1_OUT              0x290 0x598 0x000 0x4 0x0
-#define MX6SL_PAD_SD3_DAT2__GPIO5_IO16             0x290 0x598 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_DAT2__USB_OTG2_OC            0x290 0x598 0x820 0x6 0x3
-#define MX6SL_PAD_SD3_DAT3__SD3_DATA3              0x294 0x59c 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_DAT3__AUD5_TXD               0x294 0x59c 0x600 0x1 0x1
-#define MX6SL_PAD_SD3_DAT3__KEY_ROW7               0x294 0x59c 0x770 0x2 0x2
-#define MX6SL_PAD_SD3_DAT3__CSI_DATA15             0x294 0x59c 0x66c 0x3 0x1
-#define MX6SL_PAD_SD3_DAT3__EPIT2_OUT              0x294 0x59c 0x000 0x4 0x0
-#define MX6SL_PAD_SD3_DAT3__GPIO5_IO17             0x294 0x59c 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_DAT3__USB_OTG1_OC            0x294 0x59c 0x824 0x6 0x2
-#define MX6SL_PAD_UART1_RXD__UART1_RX_DATA         0x298 0x5a0 0x7fc 0x0 0x0
-#define MX6SL_PAD_UART1_RXD__UART1_TX_DATA         0x298 0x5a0 0x000 0x0 0x0
-#define MX6SL_PAD_UART1_RXD__PWM1_OUT              0x298 0x5a0 0x000 0x1 0x0
-#define MX6SL_PAD_UART1_RXD__UART4_RX_DATA         0x298 0x5a0 0x814 0x2 0x6
-#define MX6SL_PAD_UART1_RXD__UART4_TX_DATA         0x298 0x5a0 0x000 0x2 0x0
-#define MX6SL_PAD_UART1_RXD__FEC_COL               0x298 0x5a0 0x6f0 0x3 0x2
-#define MX6SL_PAD_UART1_RXD__UART5_RX_DATA         0x298 0x5a0 0x81c 0x4 0x6
-#define MX6SL_PAD_UART1_RXD__UART5_TX_DATA         0x298 0x5a0 0x000 0x4 0x0
-#define MX6SL_PAD_UART1_RXD__GPIO3_IO16            0x298 0x5a0 0x000 0x5 0x0
-#define MX6SL_PAD_UART1_TXD__UART1_TX_DATA         0x29c 0x5a4 0x000 0x0 0x0
-#define MX6SL_PAD_UART1_TXD__UART1_RX_DATA         0x29c 0x5a4 0x7fc 0x0 0x1
-#define MX6SL_PAD_UART1_TXD__PWM2_OUT              0x29c 0x5a4 0x000 0x1 0x0
-#define MX6SL_PAD_UART1_TXD__UART4_TX_DATA         0x29c 0x5a4 0x000 0x2 0x0
-#define MX6SL_PAD_UART1_TXD__UART4_RX_DATA         0x29c 0x5a4 0x814 0x2 0x7
-#define MX6SL_PAD_UART1_TXD__FEC_RX_CLK            0x29c 0x5a4 0x700 0x3 0x2
-#define MX6SL_PAD_UART1_TXD__UART5_TX_DATA         0x29c 0x5a4 0x000 0x4 0x0
-#define MX6SL_PAD_UART1_TXD__UART5_RX_DATA         0x29c 0x5a4 0x81c 0x4 0x7
-#define MX6SL_PAD_UART1_TXD__GPIO3_IO17            0x29c 0x5a4 0x000 0x5 0x0
-#define MX6SL_PAD_UART1_TXD__UART5_DCD_B           0x29c 0x5a4 0x000 0x7 0x0
-#define MX6SL_PAD_WDOG_B__WDOG1_B                  0x2a0 0x5a8 0x000 0x0 0x0
-#define MX6SL_PAD_WDOG_B__WDOG1_RESET_B_DEB        0x2a0 0x5a8 0x000 0x1 0x0
-#define MX6SL_PAD_WDOG_B__UART5_RI_B               0x2a0 0x5a8 0x000 0x2 0x0
-#define MX6SL_PAD_WDOG_B__GPIO3_IO18               0x2a0 0x5a8 0x000 0x5 0x0
-
-#endif /* __DTS_IMX6SL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
deleted file mode 100644
index 815119c12bd48..0000000000000
--- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ /dev/null
@@ -1,634 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree for the Tolino Shine 2 HD ebook reader
- *
- * Name on mainboard is: 37NB-E60QF0+4A2 or 37NB-E60QF0+4A3
- * Serials start with: E60QF2
- *
- * Copyright 2020 Andreas Kemnade
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6sl.dtsi"
-
-/ {
-	model = "Tolino Shine 2 HD";
-	compatible = "kobo,tolino-shine2hd", "fsl,imx6sl";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ec 0 50000>;
-		power-supply = <&backlight_regulator>;
-	};
-
-	backlight_regulator: regulator-backlight {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight_power>;
-		regulator-name = "backlight";
-		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	gpio_keys: gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		key-cover {
-			label = "Cover";
-			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-			linux,code = <SW_LID>;
-			linux,input-type = <EV_SW>;
-			wakeup-source;
-		};
-
-		key-fl {
-			label = "Frontlight";
-			gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BRIGHTNESS_CYCLE>;
-		};
-
-		key-home {
-			label = "Home";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led-0 {
-			label = "tolinoshine2hd:white:on";
-			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		led-1 {
-			label = "tolinoshine2hd:white:backlightboost";
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "off";
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reg_wifi: regulator-wifi {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_power>;
-		regulator-name = "SD3_SPWR";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_reset>;
-		post-power-on-delay-ms = <20>;
-		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default","sleep";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_sleep>;
-	status = "okay";
-
-	ec: embedded-controller@43 {
-		compatible = "netronix,ntxec";
-		reg = <0x43>;
-		#pwm-cells = <2>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default","sleep";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_sleep>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	zforce: touchscreen@50 {
-		compatible = "neonode,zforce";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_zforce>;
-		reg = <0x50>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-		vdd-supply = <&ldo1_reg>;
-		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-		x-size = <1072>;
-		y-size = <1448>;
-	};
-
-	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
-
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	ricoh619: pmic@32 {
-		compatible = "ricoh,rc5t619";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ricoh_gpio>;
-		reg = <0x32>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-		system-power-controller;
-
-		regulators {
-			dcdc1_reg: DCDC1 {
-				regulator-name = "DCDC1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <900000>;
-					regulator-suspend-min-microvolt = <900000>;
-				};
-			};
-
-			/* Core3_3V3 */
-			dcdc2_reg: DCDC2 {
-				regulator-name = "DCDC2";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <3100000>;
-					regulator-suspend-min-microvolt = <3100000>;
-				};
-			};
-
-			dcdc3_reg: DCDC3 {
-				regulator-name = "DCDC3";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <1140000>;
-					regulator-suspend-min-microvolt = <1140000>;
-				};
-			};
-
-			/* Core4_1V2 */
-			dcdc4_reg: DCDC4 {
-				regulator-name = "DCDC4";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <1140000>;
-					regulator-suspend-min-microvolt = <1140000>;
-				};
-			};
-
-			/* Core4_1V8 */
-			dcdc5_reg: DCDC5 {
-				regulator-name = "DCDC5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <1700000>;
-					regulator-suspend-min-microvolt = <1700000>;
-				};
-			};
-
-			/* IR_3V3 */
-			ldo1_reg: LDO1  {
-				regulator-name = "LDO1";
-				regulator-boot-on;
-			};
-
-			/* Core1_3V3 */
-			ldo2_reg: LDO2  {
-				regulator-name = "LDO2";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-max-microvolt = <3000000>;
-					regulator-suspend-min-microvolt = <3000000>;
-				};
-			};
-
-			/* Core5_1V2 */
-			ldo3_reg: LDO3  {
-				regulator-name = "LDO3";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "LDO4";
-				regulator-boot-on;
-			};
-
-			/* SPD_3V3 */
-			ldo5_reg: LDO5 {
-				regulator-name = "LDO5";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* DDR_0V6 */
-			ldo6_reg: LDO6 {
-				regulator-name = "LDO6";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* VDD_PWM */
-			ldo7_reg: LDO7 {
-				regulator-name = "LDO7";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* ldo_1v8 */
-			ldo8_reg: LDO8 {
-				regulator-name = "LDO8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "LDO9";
-				regulator-boot-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "LDO10";
-				regulator-boot-on;
-			};
-
-			ldortc1_reg: LDORTC1  {
-				regulator-name = "LDORTC1";
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_backlight_power: backlight-powergrp {
-		fsl,pins = <
-			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059
-		>;
-	};
-
-	pinctrl_gpio_keys: gpio-keysgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
-			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x17059
-			MX6SL_PAD_KEY_COL1__GPIO3_IO26  0x17059
-			MX6SL_PAD_KEY_ROW0__GPIO3_IO25  0x17059
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6SL_PAD_LCD_DAT0__GPIO2_IO20	0x79
-			MX6SL_PAD_LCD_DAT1__GPIO2_IO21	0x79
-			MX6SL_PAD_LCD_DAT2__GPIO2_IO22	0x79
-			MX6SL_PAD_LCD_DAT3__GPIO2_IO23	0x79
-			MX6SL_PAD_LCD_DAT4__GPIO2_IO24	0x79
-			MX6SL_PAD_LCD_DAT5__GPIO2_IO25	0x79
-			MX6SL_PAD_LCD_DAT6__GPIO2_IO26	0x79
-			MX6SL_PAD_LCD_DAT7__GPIO2_IO27	0x79
-			MX6SL_PAD_LCD_DAT8__GPIO2_IO28	0x79
-			MX6SL_PAD_LCD_DAT9__GPIO2_IO29	0x79
-			MX6SL_PAD_LCD_DAT10__GPIO2_IO30	0x79
-			MX6SL_PAD_LCD_DAT11__GPIO2_IO31	0x79
-			MX6SL_PAD_LCD_DAT12__GPIO3_IO00	0x79
-			MX6SL_PAD_LCD_DAT13__GPIO3_IO01	0x79
-			MX6SL_PAD_LCD_DAT14__GPIO3_IO02	0x79
-			MX6SL_PAD_LCD_DAT15__GPIO3_IO03	0x79
-			MX6SL_PAD_LCD_DAT16__GPIO3_IO04	0x79
-			MX6SL_PAD_LCD_DAT17__GPIO3_IO05	0x79
-			MX6SL_PAD_LCD_DAT18__GPIO3_IO06	0x79
-			MX6SL_PAD_LCD_DAT19__GPIO3_IO07	0x79
-			MX6SL_PAD_LCD_DAT20__GPIO3_IO08	0x79
-			MX6SL_PAD_LCD_DAT21__GPIO3_IO09	0x79
-			MX6SL_PAD_LCD_DAT22__GPIO3_IO10	0x79
-			MX6SL_PAD_LCD_DAT23__GPIO3_IO11	0x79
-			MX6SL_PAD_LCD_CLK__GPIO2_IO15		0x79
-			MX6SL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
-			MX6SL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
-			MX6SL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
-			MX6SL_PAD_LCD_RESET__GPIO2_IO19	0x79
-			MX6SL_PAD_KEY_COL3__GPIO3_IO30		0x79
-			MX6SL_PAD_KEY_ROW7__GPIO4_IO07		0x79
-			MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
-			MX6SL_PAD_KEY_COL5__GPIO4_IO02		0x79
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
-			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c1_sleep: i2c1grp-sleep {
-		fsl,pins = <
-			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
-			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
-			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c2_sleep: i2c2grp-sleep {
-		fsl,pins = <
-			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
-			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
-			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_DAT2__GPIO5_IO13    0x17059
-			MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29  0x17059
-		>;
-	};
-
-	pinctrl_ricoh_gpio: ricoh_gpiogrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_CLK__GPIO5_IO15	0x1b8b1 /* ricoh619 chg */
-			MX6SL_PAD_SD1_DAT0__GPIO5_IO11	0x1b8b1 /* ricoh619 irq */
-			MX6SL_PAD_KEY_COL2__GPIO3_IO28	0x1b8b1 /* ricoh619 bat_low_int */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
-			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
-			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
-			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
-			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
-			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
-			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
-			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
-			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
-			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
-			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
-			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
-			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
-			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
-			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
-			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
-			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
-			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
-		>;
-	};
-
-	pinctrl_wifi_power: wifi-powergrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
-		>;
-	};
-
-	pinctrl_wifi_reset: wifi-resetgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
-		>;
-	};
-
-	pinctrl_zforce: zforcegrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_DAT3__GPIO5_IO06		0x17059 /* TP_INT */
-			MX6SL_PAD_SD1_DAT5__GPIO5_IO09		0x10059 /* TP_RST */
-		>;
-	};
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&dcdc2_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&dcdc2_reg>;
-};
-
-&reg_arm {
-	vin-supply = <&dcdc3_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&dcdc1_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&dcdc1_reg>;
-};
-
-&snvs_rtc {
-	/*
-	 * We are using the RTC in the PMIC, but this one is not disabled
-	 * in imx6sl.dtsi.
-	 */
-	status = "disabled";
-};
-
-&uart1 {
-	/* J4, through-holes */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart4 {
-	/* TP198, next to J4, SMD pads */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
-	non-removable;
-	status = "okay";
-
-	/* internal uSD card */
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
-	vmmc-supply = <&reg_wifi>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	cap-power-off-card;
-	non-removable;
-	status = "okay";
-
-	/*
-	 * 37NB-E60QF0+4A2: CyberTan WC121 (BCM43362) SDIO WiFi
-	 * 37NB-E60QF0+4A3: RTL8189F SDIO WiFi
-	 */
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	disable-over-current;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
deleted file mode 100644
index db5d8509935f1..0000000000000
--- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
+++ /dev/null
@@ -1,340 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * Device tree for the Tolino Shine 3 ebook reader
- *
- * Name on mainboard is: 37NB-E60K00+4A4
- * Serials start with: E60K02 (a number also seen in
- * vendor kernel sources)
- *
- * This mainboard seems to be equipped with different SoCs.
- * In the Toline Shine 3 ebook reader it is a i.MX6SL
- *
- * Copyright 2019 Andreas Kemnade
- * based on works
- * Copyright 2016 Freescale Semiconductor, Inc.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6sl.dtsi"
-#include "e60k02.dtsi"
-
-/ {
-	model = "Tolino Shine 3";
-	compatible = "kobo,tolino-shine3", "fsl,imx6sl";
-};
-
-&gpio_keys {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio_keys>;
-};
-
-&i2c1 {
-	pinctrl-names = "default","sleep";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_sleep>;
-};
-
-&i2c2 {
-	pinctrl-names = "default","sleep";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_sleep>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_DAT3__GPIO5_IO06                0x17059 /* TP_INT */
-			MX6SL_PAD_SD1_DAT2__GPIO5_IO13                0x10059 /* TP_RST */
-		>;
-	};
-
-	pinctrl_gpio_keys: gpio-keysgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_DAT1__GPIO5_IO08	0x17059	/* PWR_SW */
-			MX6SL_PAD_SD1_DAT4__GPIO5_IO12	0x17059	/* HALL_EN */
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6SL_PAD_LCD_DAT0__GPIO2_IO20	0x79
-			MX6SL_PAD_LCD_DAT1__GPIO2_IO21	0x79
-			MX6SL_PAD_LCD_DAT2__GPIO2_IO22	0x79
-			MX6SL_PAD_LCD_DAT3__GPIO2_IO23	0x79
-			MX6SL_PAD_LCD_DAT4__GPIO2_IO24	0x79
-			MX6SL_PAD_LCD_DAT5__GPIO2_IO25	0x79
-			MX6SL_PAD_LCD_DAT6__GPIO2_IO26	0x79
-			MX6SL_PAD_LCD_DAT7__GPIO2_IO27	0x79
-			MX6SL_PAD_LCD_DAT8__GPIO2_IO28	0x79
-			MX6SL_PAD_LCD_DAT9__GPIO2_IO29	0x79
-			MX6SL_PAD_LCD_DAT10__GPIO2_IO30	0x79
-			MX6SL_PAD_LCD_DAT11__GPIO2_IO31	0x79
-			MX6SL_PAD_LCD_DAT12__GPIO3_IO00	0x79
-			MX6SL_PAD_LCD_DAT13__GPIO3_IO01	0x79
-			MX6SL_PAD_LCD_DAT14__GPIO3_IO02	0x79
-			MX6SL_PAD_LCD_DAT15__GPIO3_IO03	0x79
-			MX6SL_PAD_LCD_DAT16__GPIO3_IO04	0x79
-			MX6SL_PAD_LCD_DAT17__GPIO3_IO05	0x79
-			MX6SL_PAD_LCD_DAT18__GPIO3_IO06	0x79
-			MX6SL_PAD_LCD_DAT19__GPIO3_IO07	0x79
-			MX6SL_PAD_LCD_DAT20__GPIO3_IO08	0x79
-			MX6SL_PAD_LCD_DAT21__GPIO3_IO09	0x79
-			MX6SL_PAD_LCD_DAT22__GPIO3_IO10	0x79
-			MX6SL_PAD_LCD_DAT23__GPIO3_IO11	0x79
-			MX6SL_PAD_LCD_CLK__GPIO2_IO15		0x79
-			MX6SL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
-			MX6SL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
-			MX6SL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
-			MX6SL_PAD_LCD_RESET__GPIO2_IO19	0x79
-			MX6SL_PAD_KEY_COL3__GPIO3_IO30		0x79
-			MX6SL_PAD_KEY_ROW7__GPIO4_IO07		0x79
-			MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
-			MX6SL_PAD_KEY_COL5__GPIO4_IO02		0x79
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
-			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c1_sleep: i2c1grp-sleep {
-		fsl,pins = <
-			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
-			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
-			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c2_sleep: i2c2grp-sleep {
-		fsl,pins = <
-			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
-			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
-			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
-		>;
-	};
-
-	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
-		fsl,pins = <
-			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10		0x10059 /* HWEN */
-		>;
-	};
-
-	pinctrl_ricoh_gpio: ricoh_gpiogrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_CLK__GPIO5_IO15                  0x1b8b1 /* ricoh619 chg */
-			MX6SL_PAD_SD1_DAT0__GPIO5_IO11        0x1b8b1 /* ricoh619 irq */
-			MX6SL_PAD_KEY_COL2__GPIO3_IO28                         0x1b8b1 /* ricoh619 bat_low_int */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
-			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
-			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
-			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
-			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
-			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
-			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
-			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
-			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
-			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
-			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
-			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
-			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
-			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
-			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
-			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
-			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
-			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
-		>;
-	};
-
-	pinctrl_wifi_power: wifi-powergrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
-		>;
-	};
-
-	pinctrl_wifi_reset: wifi-resetgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
-		>;
-	};
-};
-
-&leds {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_led>;
-};
-
-&lm3630a {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
-};
-
-&reg_wifi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wifi_power>;
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&dcdc2_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&dcdc2_reg>;
-};
-
-&ricoh619 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ricoh_gpio>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
-};
-
-&wifi_pwrseq {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wifi_reset>;
-};
diff --git a/arch/arm/boot/dts/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/imx6sl-tolino-vision.dts
deleted file mode 100644
index 2694fe18a91b1..0000000000000
--- a/arch/arm/boot/dts/imx6sl-tolino-vision.dts
+++ /dev/null
@@ -1,490 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree for the Tolino Vison ebook reader
- *
- * Name on mainboard is: 37NB-E60Q30+4A3
- * Serials start with: 6032
- *
- * Copyright 2023 Andreas Kemnade
- */
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6sl.dtsi"
-
-/ {
-	model = "Tolino Vision";
-	compatible = "kobo,tolino-vision", "fsl,imx6sl";
-
-	aliases {
-		mmc0 = &usdhc4;
-		mmc1 = &usdhc2;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ec 0 50000>;
-		power-supply = <&backlight_regulator>;
-	};
-
-	backlight_regulator: regulator-backlight {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight_power>;
-		regulator-name = "backlight";
-		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	gpio_keys: gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		key-cover {
-			/* magnetic sensor in the corner next to the uSD slot */
-			label = "Cover";
-			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-			linux,code = <SW_LID>;
-			linux,input-type = <EV_SW>;
-			wakeup-source;
-		};
-
-		key-fl {
-			label = "Frontlight";
-			gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BRIGHTNESS_CYCLE>;
-		};
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-0 {
-			/* LED on home button */
-			color = <LED_COLOR_ID_WHITE>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
-		};
-
-		led-1 {
-			/* LED on power button */
-			color = <LED_COLOR_ID_WHITE>;
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reg_wifi: regulator-wifi {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_power>;
-		regulator-name = "SD3_SPWR";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
-	};
-
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_reset>;
-		post-power-on-delay-ms = <20>;
-		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default","sleep";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_sleep>;
-	status = "okay";
-
-	touchscreen@15 {
-		compatible = "elan,ektf2132";
-		reg = <0x15>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ts>;
-		power-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
-		interrupts-extended = <&gpio5 6 IRQ_TYPE_EDGE_FALLING>;
-	};
-
-	accelerometer@1d {
-		compatible = "fsl,mma8652";
-		reg = <0x1d>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default","sleep";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_sleep>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	ec: embedded-controller@43 {
-		compatible = "netronix,ntxec";
-		reg = <0x43>;
-		#pwm-cells = <2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ec>;
-		interrupts-extended = <&gpio5 11 IRQ_TYPE_EDGE_FALLING>;
-		system-power-controller;
-	};
-};
-
-&snvs_rtc {
-	/*
-	 * We are using the RTC in the PMIC, but this one is not disabled
-	 * in imx6sl.dtsi.
-	 */
-	status = "disabled";
-};
-
-&uart1 {
-	/* J4 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart4 {
-	/* J9 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
-	cd-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	/* removable uSD card */
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
-	vmmc-supply = <&reg_wifi>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	cap-power-off-card;
-	non-removable;
-	status = "okay";
-
-	/* CyberTan WC121 (BCM43362) SDIO WiFi */
-};
-
-&usdhc4 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc4_sleep>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-
-	/* internal eMMC */
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	disable-over-current;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_backlight_power: backlight-powergrp {
-		fsl,pins = <
-			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059
-		>;
-	};
-
-	pinctrl_ec: ecgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_DAT0__GPIO5_IO11  0x17000
-		>;
-	};
-
-	pinctrl_gpio_keys: gpio-keysgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x110B0
-			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x110B0
-			MX6SL_PAD_KEY_COL1__GPIO3_IO26  0x11030
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
-			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c1_sleep: i2c1-sleepgrp {
-		fsl,pins = <
-			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
-			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
-			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c2_sleep: i2c2-sleepgrp {
-		fsl,pins = <
-			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
-			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
-			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_DAT6__GPIO5_IO07    0x17059
-			MX6SL_PAD_SD1_DAT7__GPIO5_IO10    0x17059
-			MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29  0x17059
-		>;
-	};
-
-	pinctrl_ts: tsgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_DAT2__GPIO5_IO13	0x110B0
-			MX6SL_PAD_SD1_DAT3__GPIO5_IO06	0x1B0B1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
-			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
-			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
-			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6SL_PAD_SD2_DAT4__GPIO5_IO02		0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
-			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
-			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
-			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
-			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
-			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
-			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
-			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
-			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
-			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
-			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
-			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
-			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
-			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
-			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x17059
-			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x13059
-			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x17059
-			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x17059
-			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x17059
-			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x17059
-			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x17059
-			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x17059
-			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x17059
-			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x17059
-			MX6SL_PAD_FEC_REF_CLK__SD4_RESET	0x17068
-		>;
-	};
-
-	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x170b9
-			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x130b9
-			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x170b9
-			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x170b9
-			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x170b9
-			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x170b9
-			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x170b9
-			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x170b9
-			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x170b9
-			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x170b9
-		>;
-	};
-
-	pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x170f9
-			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x130f9
-			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x170f9
-			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x170f9
-			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x170f9
-			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x170f9
-			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x170f9
-			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x170f9
-			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x170f9
-			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x170f9
-		>;
-	};
-
-	pinctrl_usdhc4_sleep: usdhc4-sleepgrp {
-		fsl,pins = <
-			MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21	0x100c1
-			MX6SL_PAD_FEC_MDIO__GPIO4_IO20		0x100c1
-			MX6SL_PAD_FEC_RX_ER__GPIO4_IO19		0x100c1
-			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25	0x100c1
-			MX6SL_PAD_FEC_RXD1__GPIO4_IO18		0x100c1
-			MX6SL_PAD_FEC_TXD0__GPIO4_IO24		0x100c1
-			MX6SL_PAD_FEC_MDC__GPIO4_IO23		0x100c1
-			MX6SL_PAD_FEC_RXD0__GPIO4_IO17		0x100c1
-			MX6SL_PAD_FEC_TX_EN__GPIO4_IO22		0x100c1
-			MX6SL_PAD_FEC_TXD1__GPIO4_IO16		0x100c1
-		>;
-	};
-
-	pinctrl_wifi_power: wifi-powergrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
-		>;
-	};
-
-	pinctrl_wifi_reset: wifi-resetgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sl-tolino-vision5.dts b/arch/arm/boot/dts/imx6sl-tolino-vision5.dts
deleted file mode 100644
index 6bc342035e2b6..0000000000000
--- a/arch/arm/boot/dts/imx6sl-tolino-vision5.dts
+++ /dev/null
@@ -1,356 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * Device tree for the Tolino Vision 5 ebook reader
- *
- * Name on mainboard is: 37NB-E70K0M+6A3
- * Serials start with: E70K02 (a number also seen in
- * vendor kernel sources)
- *
- * This mainboard seems to be equipped with different SoCs.
- * In the Tolino Vision 5 ebook reader it is a i.MX6SL
- *
- * Copyright 2021 Andreas Kemnade
- * based on works
- * Copyright 2016 Freescale Semiconductor, Inc.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6sl.dtsi"
-#include "e70k02.dtsi"
-
-/ {
-	model = "Tolino Vision 5";
-	compatible = "kobo,tolino-vision5", "fsl,imx6sl";
-};
-
-&gpio_keys {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio_keys>;
-};
-
-&i2c1 {
-	pinctrl-names = "default","sleep";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_sleep>;
-};
-
-&i2c2 {
-	pinctrl-names = "default","sleep";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_sleep>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
-		fsl,pins = <
-			MX6SL_PAD_FEC_TXD0__GPIO4_IO24          0x17059 /* TP_INT */
-			MX6SL_PAD_FEC_RXD1__GPIO4_IO18          0x10059 /* TP_RST */
-		>;
-	};
-
-	pinctrl_gpio_keys: gpio-keysgrp {
-		fsl,pins = <
-			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25	0x17059	/* PWR_SW */
-			MX6SL_PAD_FEC_MDC__GPIO4_IO23	0x17059	/* HALL_EN */
-			MX6SL_PAD_KEY_COL4__GPIO4_IO00		0x17059	/* PAGE_UP */
-			MX6SL_PAD_KEY_COL5__GPIO4_IO02		0x17059	/* PAGE_DOWN */
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6SL_PAD_LCD_DAT1__GPIO2_IO21	0x79
-			MX6SL_PAD_LCD_DAT4__GPIO2_IO24	0x79
-			MX6SL_PAD_LCD_DAT5__GPIO2_IO25	0x79
-			MX6SL_PAD_LCD_DAT6__GPIO2_IO26	0x79
-			MX6SL_PAD_LCD_DAT7__GPIO2_IO27	0x79
-			MX6SL_PAD_LCD_DAT8__GPIO2_IO28	0x79
-			MX6SL_PAD_LCD_DAT9__GPIO2_IO29	0x79
-			MX6SL_PAD_LCD_DAT10__GPIO2_IO30	0x79
-			MX6SL_PAD_LCD_DAT11__GPIO2_IO31	0x79
-			MX6SL_PAD_LCD_DAT12__GPIO3_IO00	0x79
-			MX6SL_PAD_LCD_DAT13__GPIO3_IO01	0x79
-			MX6SL_PAD_LCD_DAT14__GPIO3_IO02	0x79
-			MX6SL_PAD_LCD_DAT15__GPIO3_IO03	0x79
-			MX6SL_PAD_LCD_DAT16__GPIO3_IO04	0x79
-			MX6SL_PAD_LCD_DAT17__GPIO3_IO05	0x79
-			MX6SL_PAD_LCD_DAT18__GPIO3_IO06	0x79
-			MX6SL_PAD_LCD_DAT19__GPIO3_IO07	0x79
-			MX6SL_PAD_LCD_DAT20__GPIO3_IO08	0x79
-			MX6SL_PAD_LCD_DAT21__GPIO3_IO09	0x79
-			MX6SL_PAD_LCD_DAT22__GPIO3_IO10	0x79
-			MX6SL_PAD_LCD_DAT23__GPIO3_IO11	0x79
-			MX6SL_PAD_LCD_CLK__GPIO2_IO15		0x79
-			MX6SL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
-			MX6SL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
-			MX6SL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
-			MX6SL_PAD_LCD_RESET__GPIO2_IO19	0x79
-			MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21	0x79
-			MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26	0x79
-			MX6SL_PAD_KEY_COL3__GPIO3_IO30		0x79
-			MX6SL_PAD_KEY_ROW7__GPIO4_IO07		0x79
-			MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
-			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c1_sleep: i2c1grp-sleep {
-		fsl,pins = <
-			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
-			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
-			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c2_sleep: i2c2grp-sleep {
-		fsl,pins = <
-			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
-			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
-			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX6SL_PAD_FEC_RXD0__GPIO4_IO17	0x10059
-		>;
-	};
-
-	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
-		fsl,pins = <
-			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10		0x10059 /* HWEN */
-		>;
-	};
-
-	pinctrl_ricoh_gpio: ricoh-gpiogrp {
-		fsl,pins = <
-			MX6SL_PAD_FEC_MDIO__GPIO4_IO20		0x1b8b1 /* ricoh619 chg */
-			MX6SL_PAD_FEC_RX_ER__GPIO4_IO19		0x1b8b1 /* ricoh619 irq */
-			MX6SL_PAD_KEY_COL2__GPIO3_IO28		0x1b8b1 /* ricoh619 bat_low_int */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
-			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_CMD__SD1_CMD	0x17059
-			MX6SL_PAD_SD1_CLK__SD1_CLK	0x17059
-			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x17059
-			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x17059
-			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x17059
-			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x17059
-			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x17059
-			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x17059
-			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x17059
-			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_CMD__SD1_CMD	0x170b9
-			MX6SL_PAD_SD1_CLK__SD1_CLK	0x170b9
-			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x170b9
-			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x170b9
-			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x170b9
-			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x170b9
-			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x170b9
-			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x170b9
-			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x170b9
-			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_CMD__SD1_CMD	0x170f9
-			MX6SL_PAD_SD1_CLK__SD1_CLK	0x170f9
-			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x170f9
-			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x170f9
-			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x170f9
-			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x170f9
-			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x170b9
-			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x170b9
-			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x170b9
-			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD1_CMD__SD1_CMD	0x10059
-			MX6SL_PAD_SD1_CLK__SD1_CLK	0x10059
-			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x10059
-			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x10059
-			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x10059
-			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x10059
-			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x10059
-			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x10059
-			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x10059
-			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x10059
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
-			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
-			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
-			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
-			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
-			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
-			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
-			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
-			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
-			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
-			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
-		>;
-	};
-
-	pinctrl_wifi_power: wifi-powergrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	 /* WIFI_3V3_ON */
-		>;
-	};
-
-	pinctrl_wifi_reset: wifi-resetgrp {
-		fsl,pins = <
-			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
-		>;
-	};
-};
-
-&leds {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_led>;
-};
-
-&lm3630a {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
-};
-
-&reg_wifi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wifi_power>;
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&dcdc2_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&dcdc2_reg>;
-};
-
-&reg_arm {
-	vin-supply = <&dcdc3_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&dcdc1_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&dcdc1_reg>;
-};
-
-&ricoh619 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ricoh_gpio>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc1_sleep>;
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
-};
-
-&wifi_pwrseq {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wifi_reset>;
-};
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
deleted file mode 100644
index 9d7c8884892a9..0000000000000
--- a/arch/arm/boot/dts/imx6sl-warp.dts
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * Copyright 2014, 2015 O.S. Systems Software LTDA.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6sl.dtsi"
-
-/ {
-	model = "Revotics WaRP Board";
-	compatible = "revotics,imx6sl-warp", "fsl,imx6sl";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	usdhc3_pwrseq: usdhc3_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, 	/* WL_REG_ON */
-			      <&gpio4 7 GPIO_ACTIVE_LOW>, 	/* WL_HOSTWAKE */
-			      <&gpio3 25 GPIO_ACTIVE_LOW>, 	/* BT_REG_ON */
-			      <&gpio3 27 GPIO_ACTIVE_LOW>,	/* BT_HOSTWAKE */
-			      <&gpio4 4 GPIO_ACTIVE_LOW>, 	/* BT_WAKE */
-			      <&gpio4 6 GPIO_ACTIVE_LOW>; 	/* BT_RST_N */
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "peripheral";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <4>;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	mmc-pwrseq = <&usdhc3_pwrseq>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx6sl-warp {
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x41b0b1
-				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x41b0b1
-			>;
-		};
-
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6SL_PAD_AUD_RXC__UART3_RX_DATA	0x41b0b1
-				MX6SL_PAD_AUD_RXC__UART3_TX_DATA	0x41b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA	0x41b0b1
-				MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA	0x41b0b1
-				MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B	0x4130b1
-				MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B	0x4130b1
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x417059
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x410059
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x417059
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x417059
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x417059
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x417059
-				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x417059
-				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x417059
-				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x417059
-				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x417059
-				MX6SL_PAD_SD2_RST__SD2_RESET		0x417059
-			>;
-		};
-
-		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170b9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100b9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170b9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170b9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170b9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170b9
-				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170b9
-				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170b9
-				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170b9
-				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170b9
-				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170b9
-			>;
-		};
-
-		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170f9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100f9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170f9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170f9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170f9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170f9
-				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170f9
-				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170f9
-				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170f9
-				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170f9
-				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170f9
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x417059
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x410059
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x417059
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x417059
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x417059
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x417059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170b9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100b9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170b9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170b9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170b9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170f9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100f9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170f9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170f9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170f9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170f9
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
deleted file mode 100644
index 28111efb19a66..0000000000000
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ /dev/null
@@ -1,1008 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6sl-pinfunc.h"
-#include <dt-bindings/clock/imx6sl-clock.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		mmc3 = &usdhc4;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &ecspi3;
-		spi3 = &ecspi4;
-		usb0 = &usbotg1;
-		usb1 = &usbotg2;
-		usb2 = &usbh;
-		usbphy0 = &usbphy1;
-		usbphy1 = &usbphy2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-			operating-points =
-				/* kHz    uV */
-				<996000  1275000>,
-				<792000  1175000>,
-				<396000  975000>;
-			fsl,soc-operating-points =
-				/* ARM kHz	SOC-PU uV */
-				<996000		1225000>,
-				<792000		1175000>,
-				<396000		1175000>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			#cooling-cells = <2>;
-			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
-					<&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
-					<&clks IMX6SL_CLK_PLL1_SYS>;
-			clock-names = "arm", "pll2_pfd2_396m", "step",
-				      "pll1_sw", "pll1_sys";
-			arm-supply = <&reg_arm>;
-			pu-supply = <&reg_pu>;
-			soc-supply = <&reg_soc>;
-			nvmem-cells = <&cpu_speed_grade>;
-			nvmem-cell-names = "speed_grade";
-		};
-	};
-
-	clocks {
-		ckil {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-
-		osc {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&gpc>;
-		interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	usbphynop1: usbphynop1 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gpc>;
-		ranges;
-
-		ocram: sram@900000 {
-			compatible = "mmio-sram";
-			reg = <0x00900000 0x20000>;
-			ranges = <0 0x00900000 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&clks IMX6SL_CLK_OCRAM>;
-		};
-
-		intc: interrupt-controller@a01000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x00a01000 0x1000>,
-			      <0x00a00100 0x100>;
-			interrupt-parent = <&intc>;
-		};
-
-		L2: cache-controller@a02000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x00a02000 0x1000>;
-			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
-			cache-unified;
-			cache-level = <2>;
-			arm,tag-latency = <4 2 3>;
-			arm,data-latency = <4 2 3>;
-		};
-
-		aips1: bus@2000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02000000 0x100000>;
-			ranges;
-
-			spba: spba-bus@2000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x02000000 0x40000>;
-				ranges;
-
-				spdif: spdif@2004000 {
-					compatible = "fsl,imx6sl-spdif",
-						"fsl,imx35-spdif";
-					reg = <0x02004000 0x4000>;
-					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 14 18 0>,
-						<&sdma 15 18 0>;
-					dma-names = "rx", "tx";
-					clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>,
-						 <&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>,
-						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>,
-						 <&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>,
-						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>;
-					clock-names = "core", "rxtx0",
-						"rxtx1", "rxtx2",
-						"rxtx3", "rxtx4",
-						"rxtx5", "rxtx6",
-						"rxtx7", "spba";
-					status = "disabled";
-				};
-
-				ecspi1: spi@2008000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02008000 0x4000>;
-					interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_ECSPI1>,
-						 <&clks IMX6SL_CLK_ECSPI1>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi2: spi@200c000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
-					reg = <0x0200c000 0x4000>;
-					interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_ECSPI2>,
-						 <&clks IMX6SL_CLK_ECSPI2>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi3: spi@2010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02010000 0x4000>;
-					interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_ECSPI3>,
-						 <&clks IMX6SL_CLK_ECSPI3>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi4: spi@2014000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02014000 0x4000>;
-					interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_ECSPI4>,
-						 <&clks IMX6SL_CLK_ECSPI4>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart5: serial@2018000 {
-					compatible = "fsl,imx6sl-uart",
-						     "fsl,imx6q-uart", "fsl,imx21-uart";
-					reg = <0x02018000 0x4000>;
-					interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_UART>,
-						 <&clks IMX6SL_CLK_UART_SERIAL>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				uart1: serial@2020000 {
-					compatible = "fsl,imx6sl-uart",
-						     "fsl,imx6q-uart", "fsl,imx21-uart";
-					reg = <0x02020000 0x4000>;
-					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_UART>,
-						 <&clks IMX6SL_CLK_UART_SERIAL>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				uart2: serial@2024000 {
-					compatible = "fsl,imx6sl-uart",
-						     "fsl,imx6q-uart", "fsl,imx21-uart";
-					reg = <0x02024000 0x4000>;
-					interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_UART>,
-						 <&clks IMX6SL_CLK_UART_SERIAL>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				ssi1: ssi@2028000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6sl-ssi",
-							"fsl,imx51-ssi";
-					reg = <0x02028000 0x4000>;
-					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_SSI1_IPG>,
-						 <&clks IMX6SL_CLK_SSI1>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 37 1 0>,
-					       <&sdma 38 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				ssi2: ssi@202c000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6sl-ssi",
-							"fsl,imx51-ssi";
-					reg = <0x0202c000 0x4000>;
-					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_SSI2_IPG>,
-						 <&clks IMX6SL_CLK_SSI2>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 41 1 0>,
-					       <&sdma 42 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				ssi3: ssi@2030000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6sl-ssi",
-							"fsl,imx51-ssi";
-					reg = <0x02030000 0x4000>;
-					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_SSI3_IPG>,
-						 <&clks IMX6SL_CLK_SSI3>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 45 1 0>,
-					       <&sdma 46 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				uart3: serial@2034000 {
-					compatible = "fsl,imx6sl-uart",
-						     "fsl,imx6q-uart", "fsl,imx21-uart";
-					reg = <0x02034000 0x4000>;
-					interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_UART>,
-						 <&clks IMX6SL_CLK_UART_SERIAL>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				uart4: serial@2038000 {
-					compatible = "fsl,imx6sl-uart",
-						     "fsl,imx6q-uart", "fsl,imx21-uart";
-					reg = <0x02038000 0x4000>;
-					interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_UART>,
-						 <&clks IMX6SL_CLK_UART_SERIAL>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-			};
-
-			pwm1: pwm@2080000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
-				reg = <0x02080000 0x4000>;
-				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_PERCLK>,
-					 <&clks IMX6SL_CLK_PWM1>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm2: pwm@2084000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
-				reg = <0x02084000 0x4000>;
-				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_PERCLK>,
-					 <&clks IMX6SL_CLK_PWM2>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm3: pwm@2088000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
-				reg = <0x02088000 0x4000>;
-				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_PERCLK>,
-					 <&clks IMX6SL_CLK_PWM3>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm4: pwm@208c000 {
-				#pwm-cells = <3>;
-				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
-				reg = <0x0208c000 0x4000>;
-				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_PERCLK>,
-					 <&clks IMX6SL_CLK_PWM4>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt: timer@2098000 {
-				compatible = "fsl,imx6sl-gpt";
-				reg = <0x02098000 0x4000>;
-				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_GPT>,
-					 <&clks IMX6SL_CLK_GPT_SERIAL>;
-				clock-names = "ipg", "per";
-			};
-
-			gpio1: gpio@209c000 {
-				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
-				reg = <0x0209c000 0x4000>;
-				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 67 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc  0 22 1>, <&iomuxc  1 20 2>,
-					      <&iomuxc  3 23 1>, <&iomuxc  4 25 1>,
-					      <&iomuxc  5 24 1>, <&iomuxc  6 19 1>,
-					      <&iomuxc  7 36 2>, <&iomuxc  9 44 8>,
-					      <&iomuxc 17 38 6>, <&iomuxc 23 68 4>,
-					      <&iomuxc 27 64 4>, <&iomuxc 31 52 1>;
-			};
-
-			gpio2: gpio@20a0000 {
-				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
-				reg = <0x020a0000 0x4000>;
-				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 69 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc  0  53 3>, <&iomuxc  3  72 2>,
-					      <&iomuxc  5  34 2>, <&iomuxc  7  57 4>,
-					      <&iomuxc 11  56 1>, <&iomuxc 12  61 3>,
-					      <&iomuxc 15 107 1>, <&iomuxc 16 132 2>,
-					      <&iomuxc 18 135 1>, <&iomuxc 19 134 1>,
-					      <&iomuxc 20 108 2>, <&iomuxc 22 120 1>,
-					      <&iomuxc 23 125 7>, <&iomuxc 30 110 2>;
-			};
-
-			gpio3: gpio@20a4000 {
-				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
-				reg = <0x020a4000 0x4000>;
-				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc  0 112 8>, <&iomuxc  8 121 4>,
-					      <&iomuxc 12  97 4>, <&iomuxc 16 166 3>,
-					      <&iomuxc 19  85 2>, <&iomuxc 21 137 2>,
-					      <&iomuxc 23 136 1>, <&iomuxc 24  91 1>,
-					      <&iomuxc 25  99 1>, <&iomuxc 26  92 1>,
-					      <&iomuxc 27 100 1>, <&iomuxc 28  93 1>,
-					      <&iomuxc 29 101 1>, <&iomuxc 30  94 1>,
-					      <&iomuxc 31 102 1>;
-			};
-
-			gpio4: gpio@20a8000 {
-				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
-				reg = <0x020a8000 0x4000>;
-				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc  0  95 1>, <&iomuxc  1 103 1>,
-					      <&iomuxc  2  96 1>, <&iomuxc  3 104 1>,
-					      <&iomuxc  4  97 1>, <&iomuxc  5 105 1>,
-					      <&iomuxc  6  98 1>, <&iomuxc  7 106 1>,
-					      <&iomuxc  8  28 1>, <&iomuxc  9  27 1>,
-					      <&iomuxc 10  26 1>, <&iomuxc 11  29 1>,
-					      <&iomuxc 12  32 1>, <&iomuxc 13  31 1>,
-					      <&iomuxc 14  30 1>, <&iomuxc 15  33 1>,
-					      <&iomuxc 16  84 1>, <&iomuxc 17  79 2>,
-					      <&iomuxc 19  78 1>, <&iomuxc 20  76 1>,
-					      <&iomuxc 21  81 2>, <&iomuxc 23  75 1>,
-					      <&iomuxc 24  83 1>, <&iomuxc 25  74 1>,
-					      <&iomuxc 26  77 1>, <&iomuxc 27 159 1>,
-					      <&iomuxc 28 154 1>, <&iomuxc 29 157 1>,
-					      <&iomuxc 30 152 1>, <&iomuxc 31 156 1>;
-			};
-
-			gpio5: gpio@20ac000 {
-				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
-				reg = <0x020ac000 0x4000>;
-				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc  0 158 1>, <&iomuxc  1 151 1>,
-					      <&iomuxc  2 155 1>, <&iomuxc  3 153 1>,
-					      <&iomuxc  4 150 1>, <&iomuxc  5 149 1>,
-					      <&iomuxc  6 144 1>, <&iomuxc  7 147 1>,
-					      <&iomuxc  8 142 1>, <&iomuxc  9 146 1>,
-					      <&iomuxc 10 148 1>, <&iomuxc 11 141 1>,
-					      <&iomuxc 12 145 1>, <&iomuxc 13 143 1>,
-					      <&iomuxc 14 140 1>, <&iomuxc 15 139 1>,
-					      <&iomuxc 16 164 2>, <&iomuxc 18 160 1>,
-					      <&iomuxc 19 162 1>, <&iomuxc 20 163 1>,
-					      <&iomuxc 21 161 1>;
-			};
-
-			kpp: keypad@20b8000 {
-				compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
-				reg = <0x020b8000 0x4000>;
-				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_IPG>;
-				status = "disabled";
-			};
-
-			wdog1: watchdog@20bc000 {
-				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
-				reg = <0x020bc000 0x4000>;
-				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_IPG>;
-			};
-
-			wdog2: watchdog@20c0000 {
-				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
-				reg = <0x020c0000 0x4000>;
-				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_IPG>;
-				status = "disabled";
-			};
-
-			clks: clock-controller@20c4000 {
-				compatible = "fsl,imx6sl-ccm";
-				reg = <0x020c4000 0x4000>;
-				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 88 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-			};
-
-			anatop: anatop@20c8000 {
-				compatible = "fsl,imx6sl-anatop",
-					     "fsl,imx6q-anatop",
-					     "syscon", "simple-mfd";
-				reg = <0x020c8000 0x1000>;
-				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
-
-				reg_vdd1p1: regulator-1p1 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p1";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x110>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <4>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1375000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_vdd3p0: regulator-3p0 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x120>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2625000>;
-					anatop-max-voltage = <3400000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_vdd2p5: regulator-2p5 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd2p5";
-					regulator-min-microvolt = <2250000>;
-					regulator-max-microvolt = <2750000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x130>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2100000>;
-					anatop-max-voltage = <2850000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_arm: regulator-vddcore {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddarm";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <0>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <24>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				reg_pu: regulator-vddpu {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddpu";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <9>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <26>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				reg_soc: regulator-vddsoc {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddsoc";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <18>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <28>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				tempmon: tempmon {
-					compatible = "fsl,imx6q-tempmon";
-					interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-parent = <&gpc>;
-					fsl,tempmon = <&anatop>;
-					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-					nvmem-cell-names = "calib", "temp_grade";
-					clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
-				};
-			};
-
-			usbphy1: usbphy@20c9000 {
-				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020c9000 0x1000>;
-				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_USBPHY1>;
-				fsl,anatop = <&anatop>;
-			};
-
-			usbphy2: usbphy@20ca000 {
-				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020ca000 0x1000>;
-				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_USBPHY2>;
-				fsl,anatop = <&anatop>;
-			};
-
-			snvs: snvs@20cc000 {
-				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-				reg = <0x020cc000 0x4000>;
-
-				snvs_rtc: snvs-rtc-lp {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap = <&snvs>;
-					offset = <0x34>;
-					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
-						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				snvs_poweroff: snvs-poweroff {
-					compatible = "syscon-poweroff";
-					regmap = <&snvs>;
-					offset = <0x38>;
-					value = <0x60>;
-					mask = <0x60>;
-					status = "disabled";
-				};
-			};
-
-			epit1: epit@20d0000 {
-				reg = <0x020d0000 0x4000>;
-				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			epit2: epit@20d4000 {
-				reg = <0x020d4000 0x4000>;
-				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			src: reset-controller@20d8000 {
-				compatible = "fsl,imx6sl-src", "fsl,imx51-src";
-				reg = <0x020d8000 0x4000>;
-				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 96 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
-			};
-
-			gpc: gpc@20dc000 {
-				compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
-				reg = <0x020dc000 0x4000>;
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-parent = <&intc>;
-				clocks = <&clks IMX6SL_CLK_IPG>;
-				clock-names = "ipg";
-
-				pgc {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					power-domain@0 {
-						reg = <0>;
-						#power-domain-cells = <0>;
-					};
-
-					pd_pu: power-domain@1 {
-						reg = <1>;
-						#power-domain-cells = <0>;
-						power-supply = <&reg_pu>;
-						clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
-							 <&clks IMX6SL_CLK_GPU2D_PODF>;
-					};
-
-					pd_disp: power-domain@2 {
-						reg = <2>;
-						#power-domain-cells = <0>;
-						clocks = <&clks IMX6SL_CLK_LCDIF_AXI>,
-							 <&clks IMX6SL_CLK_LCDIF_PIX>,
-							 <&clks IMX6SL_CLK_EPDC_AXI>,
-							 <&clks IMX6SL_CLK_EPDC_PIX>,
-							 <&clks IMX6SL_CLK_PXP_AXI>;
-					};
-				};
-			};
-
-			gpr: iomuxc-gpr@20e0000 {
-				compatible = "fsl,imx6sl-iomuxc-gpr",
-					     "fsl,imx6q-iomuxc-gpr", "syscon";
-				reg = <0x020e0000 0x38>;
-			};
-
-			iomuxc: pinctrl@20e0000 {
-				compatible = "fsl,imx6sl-iomuxc";
-				reg = <0x020e0000 0x4000>;
-			};
-
-			csi: csi@20e4000 {
-				reg = <0x020e4000 0x4000>;
-				interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			spdc: spdc@20e8000 {
-				reg = <0x020e8000 0x4000>;
-				interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			sdma: dma-controller@20ec000 {
-				compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
-				reg = <0x020ec000 0x4000>;
-				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_SDMA>,
-					 <&clks IMX6SL_CLK_AHB>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				/* imx6sl reuses imx6q sdma firmware */
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
-			};
-
-			pxp: pxp@20f0000 {
-				reg = <0x020f0000 0x4000>;
-				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			epdc: epdc@20f4000 {
-				reg = <0x020f4000 0x4000>;
-				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			lcdif: lcdif@20f8000 {
-				compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif";
-				reg = <0x020f8000 0x4000>;
-				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_LCDIF_PIX>,
-					 <&clks IMX6SL_CLK_LCDIF_AXI>,
-					 <&clks IMX6SL_CLK_DUMMY>;
-				clock-names = "pix", "axi", "disp_axi";
-				status = "disabled";
-				power-domains = <&pd_disp>;
-			};
-
-			dcp: crypto@20fc000 {
-				compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
-				reg = <0x020fc000 0x4000>;
-				interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 100 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 101 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		aips2: bus@2100000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02100000 0x100000>;
-			ranges;
-
-			usbotg1: usb@2184000 {
-				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
-				reg = <0x02184000 0x200>;
-				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy1>;
-				fsl,usbmisc = <&usbmisc 0>;
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbotg2: usb@2184200 {
-				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
-				reg = <0x02184200 0x200>;
-				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy2>;
-				fsl,usbmisc = <&usbmisc 1>;
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbh: usb@2184400 {
-				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
-				reg = <0x02184400 0x200>;
-				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_USBOH3>;
-				fsl,usbphy = <&usbphynop1>;
-				phy_type = "hsic";
-				fsl,usbmisc = <&usbmisc 2>;
-				dr_mode = "host";
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@2184800 {
-				#index-cells = <1>;
-				compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x02184800 0x200>;
-				clocks = <&clks IMX6SL_CLK_USBOH3>;
-			};
-
-			fec: ethernet@2188000 {
-				compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
-				reg = <0x02188000 0x4000>;
-				interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_ENET>,
-					 <&clks IMX6SL_CLK_ENET_REF>;
-				clock-names = "ipg", "ahb";
-				status = "disabled";
-			};
-
-			usdhc1: mmc@2190000 {
-				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
-				reg = <0x02190000 0x4000>;
-				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_USDHC1>,
-					 <&clks IMX6SL_CLK_USDHC1>,
-					 <&clks IMX6SL_CLK_USDHC1>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc2: mmc@2194000 {
-				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
-				reg = <0x02194000 0x4000>;
-				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_USDHC2>,
-					 <&clks IMX6SL_CLK_USDHC2>,
-					 <&clks IMX6SL_CLK_USDHC2>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc3: mmc@2198000 {
-				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
-				reg = <0x02198000 0x4000>;
-				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_USDHC3>,
-					 <&clks IMX6SL_CLK_USDHC3>,
-					 <&clks IMX6SL_CLK_USDHC3>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc4: mmc@219c000 {
-				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
-				reg = <0x0219c000 0x4000>;
-				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_USDHC4>,
-					 <&clks IMX6SL_CLK_USDHC4>,
-					 <&clks IMX6SL_CLK_USDHC4>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@21a0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
-				reg = <0x021a0000 0x4000>;
-				interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_I2C1>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@21a4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
-				reg = <0x021a4000 0x4000>;
-				interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_I2C2>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@21a8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
-				reg = <0x021a8000 0x4000>;
-				interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_I2C3>;
-				status = "disabled";
-			};
-
-			memory-controller@21b0000 {
-				compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
-				reg = <0x021b0000 0x4000>;
-				clocks = <&clks IMX6SL_CLK_MMDC_P0_IPG>;
-			};
-
-			rngb: rngb@21b4000 {
-				compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb";
-				reg = <0x021b4000 0x4000>;
-				interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SL_CLK_DUMMY>;
-			};
-
-			weim: weim@21b8000 {
-				#address-cells = <2>;
-				#size-cells = <1>;
-				reg = <0x021b8000 0x4000>;
-				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
-				fsl,weim-cs-gpr = <&gpr>;
-				status = "disabled";
-			};
-
-			ocotp: efuse@21bc000 {
-				compatible = "fsl,imx6sl-ocotp", "syscon";
-				reg = <0x021bc000 0x4000>;
-				clocks = <&clks IMX6SL_CLK_OCOTP>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				cpu_speed_grade: speed-grade@10 {
-					reg = <0x10 4>;
-				};
-
-				tempmon_calib: calib@38 {
-					reg = <0x38 4>;
-				};
-
-				tempmon_temp_grade: temp-grade@20 {
-					reg = <0x20 4>;
-				};
-			};
-
-			audmux: audmux@21d8000 {
-				compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux";
-				reg = <0x021d8000 0x4000>;
-				status = "disabled";
-			};
-		};
-
-		gpu_2d: gpu@2200000 {
-			compatible = "vivante,gc";
-			reg = <0x02200000 0x4000>;
-			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6SL_CLK_MMDC_ROOT>,
-				 <&clks IMX6SL_CLK_GPU2D_OVG>;
-			clock-names = "bus", "core";
-			power-domains = <&pd_pu>;
-		};
-
-		gpu_vg: gpu@2204000 {
-			compatible = "vivante,gc";
-			reg = <0x02204000 0x4000>;
-			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6SL_CLK_MMDC_ROOT>,
-				 <&clks IMX6SL_CLK_GPU2D_OVG>;
-			clock-names = "bus", "core";
-			power-domains = <&pd_pu>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
deleted file mode 100644
index 269092ac881c5..0000000000000
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ /dev/null
@@ -1,576 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2017-2018 NXP.
- *
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6sll.dtsi"
-
-/ {
-	model = "Freescale i.MX6SLL EVK Board";
-	compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	backlight_display: backlight-display {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led-user {
-			label = "debug";
-			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_usb_otg1_vbus: regulator-otg1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-otg2-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg2_vbus>;
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_aud3v: regulator-aud3v {
-		compatible = "regulator-fixed";
-		regulator-name = "wm8962-supply-3v15";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-		regulator-boot-on;
-	};
-
-	reg_aud4v: regulator-aud4v {
-		compatible = "regulator-fixed";
-		regulator-name = "wm8962-supply-4v2";
-		regulator-min-microvolt = <4325000>;
-		regulator-max-microvolt = <4325000>;
-		regulator-boot-on;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
-		regulator-name = "lcd-3v3";
-		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lcd_5v: regulator-lcd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_sd1_vmmc: regulator-sd1-vmmc {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_sd1_vmmc>;
-		regulator-name = "SD1_SPWR";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_sd3_vmmc: regulator-sd3-vmmc {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_sd3_vmmc>;
-		regulator-name = "SD3_WIFI";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hp>;
-		model = "wm8962-audio";
-		audio-cpu = <&ssi2>;
-		audio-codec = <&wm8962>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-		hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux3>;
-	status = "okay";
-};
-
-&cpu0 {
-	arm-supply = <&sw1a_reg>;
-	soc-supply = <&sw1c_reg>;
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pfuze100: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	wm8962: audio-codec@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>;
-		DCVDD-supply = <&vgen3_reg>;
-		DBVDD-supply = <&reg_aud3v>;
-		AVDD-supply = <&vgen3_reg>;
-		CPVDD-supply = <&vgen3_reg>;
-		MICVDD-supply = <&reg_aud3v>;
-		PLLVDD-supply = <&vgen3_reg>;
-		SPKVDD1-supply = <&reg_aud4v>;
-		SPKVDD2-supply = <&reg_aud4v>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcd>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_sd1_vmmc>;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	disable-over-current;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_sd3_vmmc>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_audmux3: audmux3grp {
-		fsl,pins = <
-			MX6SLL_PAD_AUD_TXC__AUD3_TXC		0x4130b0
-			MX6SLL_PAD_AUD_TXFS__AUD3_TXFS		0x4130b0
-			MX6SLL_PAD_AUD_TXD__AUD3_TXD		0x4110b0
-			MX6SLL_PAD_AUD_RXD__AUD3_RXD		0x4130b0
-			MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT	0x4130b0
-		>;
-	};
-
-	pinctrl_hp: hpgrp {
-		fsl,pins = <
-			MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
-		>;
-	};
-
-	pinctrl_reg_sd3_vmmc: sd3vmmcgrp {
-		fsl,pins = <
-			MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059
-		>;
-	};
-
-	pinctrl_usb_otg1_vbus: vbus1grp {
-		fsl,pins = <
-			MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
-		>;
-	};
-
-	pinctrl_usb_otg2_vbus: vbus2grp {
-		fsl,pins = <
-			MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
-		>;
-	};
-
-	pinctrl_reg_lcd_3v3: reglcd3v3grp {
-		fsl,pins = <
-			MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
-		>;
-	};
-
-	pinctrl_reg_sd1_vmmc: sd1vmmcgrp {
-		fsl,pins = <
-			MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
-			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
-			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x13059
-			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
-			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
-			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
-			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
-		fsl,pins = <
-			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
-			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130b9
-			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
-			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
-			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
-			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
-		fsl,pins = <
-			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
-			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130f9
-			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
-			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
-			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
-			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x17061
-			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x13061
-			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x17061
-			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x17061
-			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x17061
-			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x17061
-			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170a1
-			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130a1
-			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x170a1
-			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x170a1
-			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x170a1
-			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x170a1
-			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170e9
-			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130f9
-			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x170e9
-			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x170e9
-			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x170e9
-			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x170e9
-			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	 0x4001b8b1
-			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6SLL_PAD_AUD_RXFS__I2C3_SCL  0x4041b8b1
-			MX6SLL_PAD_AUD_RXC__I2C3_SDA   0x4041b8b1
-		>;
-	};
-
-	pinctrl_lcd: lcdgrp {
-		fsl,pins = <
-			MX6SLL_PAD_LCD_DATA00__LCD_DATA00	0x79
-			MX6SLL_PAD_LCD_DATA01__LCD_DATA01	0x79
-			MX6SLL_PAD_LCD_DATA02__LCD_DATA02	0x79
-			MX6SLL_PAD_LCD_DATA03__LCD_DATA03	0x79
-			MX6SLL_PAD_LCD_DATA04__LCD_DATA04	0x79
-			MX6SLL_PAD_LCD_DATA05__LCD_DATA05	0x79
-			MX6SLL_PAD_LCD_DATA06__LCD_DATA06	0x79
-			MX6SLL_PAD_LCD_DATA07__LCD_DATA07	0x79
-			MX6SLL_PAD_LCD_DATA08__LCD_DATA08	0x79
-			MX6SLL_PAD_LCD_DATA09__LCD_DATA09	0x79
-			MX6SLL_PAD_LCD_DATA10__LCD_DATA10	0x79
-			MX6SLL_PAD_LCD_DATA11__LCD_DATA11	0x79
-			MX6SLL_PAD_LCD_DATA12__LCD_DATA12	0x79
-			MX6SLL_PAD_LCD_DATA13__LCD_DATA13	0x79
-			MX6SLL_PAD_LCD_DATA14__LCD_DATA14	0x79
-			MX6SLL_PAD_LCD_DATA15__LCD_DATA15	0x79
-			MX6SLL_PAD_LCD_DATA16__LCD_DATA16	0x79
-			MX6SLL_PAD_LCD_DATA17__LCD_DATA17	0x79
-			MX6SLL_PAD_LCD_DATA18__LCD_DATA18	0x79
-			MX6SLL_PAD_LCD_DATA19__LCD_DATA19	0x79
-			MX6SLL_PAD_LCD_DATA20__LCD_DATA20	0x79
-			MX6SLL_PAD_LCD_DATA21__LCD_DATA21	0x79
-			MX6SLL_PAD_LCD_DATA22__LCD_DATA22	0x79
-			MX6SLL_PAD_LCD_DATA23__LCD_DATA23	0x79
-			MX6SLL_PAD_LCD_CLK__LCD_CLK		0x79
-			MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE	0x79
-			MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC		0x79
-			MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC		0x79
-			MX6SLL_PAD_LCD_RESET__LCD_RESET		0x79
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04	0x17059
-		>;
-	};
-
-	pinctrl_pwm1: pmw1grp {
-		fsl,pins = <
-			MX6SLL_PAD_PWM1__PWM1_OUT   0x110b0
-		>;
-	};
-
-	pinctrl_wdog1: wdog1grp	{
-		fsl,pins = <
-			MX6SLL_PAD_WDOG_B__WDOG1_B   0x170b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
deleted file mode 100644
index c7cfe0b70f04e..0000000000000
--- a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
+++ /dev/null
@@ -1,342 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * Device tree for the Kobo Clara HD ebook reader
- *
- * Name on mainboard is: 37NB-E60K00+4A4
- * Serials start with: E60K02 (a number also seen in
- * vendor kernel sources)
- *
- * This mainboard seems to be equipped with different SoCs.
- * In the Kobo Clara HD ebook reader it is an i.MX6SLL
- *
- * Copyright 2019 Andreas Kemnade
- * based on works
- * Copyright 2016 Freescale Semiconductor, Inc.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6sll.dtsi"
-#include "e60k02.dtsi"
-
-/ {
-	model = "Kobo Clara HD";
-	compatible = "kobo,clarahd", "fsl,imx6sll";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <393216000>;
-};
-
-&cpu0 {
-	arm-supply = <&dcdc3_reg>;
-	soc-supply = <&dcdc1_reg>;
-};
-
-&gpio_keys {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio_keys>;
-};
-
-&i2c1 {
-	pinctrl-names = "default","sleep";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_sleep>;
-};
-
-&i2c2 {
-	pinctrl-names = "default","sleep";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_sleep>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                0x17059 /* TP_INT */
-			MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                0x10059 /* TP_RST */
-		>;
-	};
-
-	pinctrl_gpio_keys: gpio-keysgrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD1_DATA1__GPIO5_IO08	0x17059	/* PWR_SW */
-			MX6SLL_PAD_SD1_DATA4__GPIO5_IO12	0x17059	/* HALL_EN */
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6SLL_PAD_LCD_DATA00__GPIO2_IO20	0x79
-			MX6SLL_PAD_LCD_DATA01__GPIO2_IO21	0x79
-			MX6SLL_PAD_LCD_DATA02__GPIO2_IO22	0x79
-			MX6SLL_PAD_LCD_DATA03__GPIO2_IO23	0x79
-			MX6SLL_PAD_LCD_DATA04__GPIO2_IO24	0x79
-			MX6SLL_PAD_LCD_DATA05__GPIO2_IO25	0x79
-			MX6SLL_PAD_LCD_DATA06__GPIO2_IO26	0x79
-			MX6SLL_PAD_LCD_DATA07__GPIO2_IO27	0x79
-			MX6SLL_PAD_LCD_DATA08__GPIO2_IO28	0x79
-			MX6SLL_PAD_LCD_DATA09__GPIO2_IO29	0x79
-			MX6SLL_PAD_LCD_DATA10__GPIO2_IO30	0x79
-			MX6SLL_PAD_LCD_DATA11__GPIO2_IO31	0x79
-			MX6SLL_PAD_LCD_DATA12__GPIO3_IO00	0x79
-			MX6SLL_PAD_LCD_DATA13__GPIO3_IO01	0x79
-			MX6SLL_PAD_LCD_DATA14__GPIO3_IO02	0x79
-			MX6SLL_PAD_LCD_DATA15__GPIO3_IO03	0x79
-			MX6SLL_PAD_LCD_DATA16__GPIO3_IO04	0x79
-			MX6SLL_PAD_LCD_DATA17__GPIO3_IO05	0x79
-			MX6SLL_PAD_LCD_DATA18__GPIO3_IO06	0x79
-			MX6SLL_PAD_LCD_DATA19__GPIO3_IO07	0x79
-			MX6SLL_PAD_LCD_DATA20__GPIO3_IO08	0x79
-			MX6SLL_PAD_LCD_DATA21__GPIO3_IO09	0x79
-			MX6SLL_PAD_LCD_DATA22__GPIO3_IO10	0x79
-			MX6SLL_PAD_LCD_DATA23__GPIO3_IO11	0x79
-			MX6SLL_PAD_LCD_CLK__GPIO2_IO15		0x79
-			MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
-			MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
-			MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
-			MX6SLL_PAD_LCD_RESET__GPIO2_IO19	0x79
-			MX6SLL_PAD_KEY_COL3__GPIO3_IO30		0x79
-			MX6SLL_PAD_KEY_ROW7__GPIO4_IO07		0x79
-			MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
-			MX6SLL_PAD_KEY_COL5__GPIO4_IO02		0x79
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	0x4001f8b1
-			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c1_sleep: i2c1grp-sleep {
-		fsl,pins = <
-			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	0x400108b1
-			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	0x400108b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6SLL_PAD_I2C2_SCL__I2C2_SCL	0x4001f8b1
-			MX6SLL_PAD_I2C2_SDA__I2C2_SDA	0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c2_sleep: i2c2grp-sleep {
-		fsl,pins = <
-			MX6SLL_PAD_I2C2_SCL__I2C2_SCL	0x400108b1
-			MX6SLL_PAD_I2C2_SDA__I2C2_SDA	0x400108b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
-			MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x17059
-		>;
-	};
-
-	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
-		fsl,pins = <
-			MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10	0x10059 /* HWEN */
-		>;
-	};
-
-	pinctrl_ricoh_gpio: ricoh-gpiogrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD1_CLK__GPIO5_IO15	0x1b8b1 /* ricoh619 chg */
-			MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */
-			MX6SLL_PAD_KEY_COL2__GPIO3_IO28	0x1b8b1 /* ricoh619 bat_low_int */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
-			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX 0x1b0b1
-			MX6SLL_PAD_KEY_COL6__UART4_DCE_RX 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x13059
-			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x17059
-			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x17059
-			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x17059
-			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
-		fsl,pins = <
-			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
-			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
-			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170b9
-			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170b9
-			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170b9
-			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
-		fsl,pins = <
-			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
-			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
-			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170f9
-			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170f9
-			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170f9
-			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
-		fsl,pins = <
-			MX6SLL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
-			MX6SLL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
-			MX6SLL_PAD_SD2_DATA0__GPIO5_IO01	0x100f9
-			MX6SLL_PAD_SD2_DATA1__GPIO4_IO30	0x100f9
-			MX6SLL_PAD_SD2_DATA2__GPIO5_IO03	0x100f9
-			MX6SLL_PAD_SD2_DATA3__GPIO4_IO28	0x100f9
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x11059
-			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x11059
-			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x11059
-			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x11059
-			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x11059
-			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x11059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
-		fsl,pins = <
-			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
-			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170b9
-			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170b9
-			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170b9
-			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170b9
-			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
-		fsl,pins = <
-			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
-			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170f9
-			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170f9
-			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170f9
-			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170f9
-			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
-		fsl,pins = <
-			MX6SLL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
-			MX6SLL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
-			MX6SLL_PAD_SD3_DATA0__GPIO5_IO19	0x100c1
-			MX6SLL_PAD_SD3_DATA1__GPIO5_IO20	0x100c1
-			MX6SLL_PAD_SD3_DATA2__GPIO5_IO16	0x100c1
-			MX6SLL_PAD_SD3_DATA3__GPIO5_IO17	0x100c1
-		>;
-	};
-
-	pinctrl_wifi_power: wifi-powergrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD2_DATA6__GPIO4_IO29	0x10059		/* WIFI_3V3_ON */
-		>;
-	};
-
-	pinctrl_wifi_reset: wifi-resetgrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD2_DATA7__GPIO5_IO00	0x10059		/* WIFI_RST */
-		>;
-	};
-};
-
-&leds {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_led>;
-};
-
-&lm3630a {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
-};
-
-&reg_wifi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wifi_power>;
-};
-
-&ricoh619 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ricoh_gpio>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
-};
-
-&wifi_pwrseq {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wifi_reset>;
-};
diff --git a/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts b/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts
deleted file mode 100644
index 7e4f38dd11e20..0000000000000
--- a/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts
+++ /dev/null
@@ -1,346 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * Device tree for the Kobo Libra H2O ebook reader
- *
- * Name on mainboard is: 37NB-E70K0M+6A3
- * Serials start with: E70K02 (a number also seen in
- * vendor kernel sources)
- *
- * This mainboard seems to be equipped with different SoCs.
- * In the Kobo Libra H2O ebook reader it is an i.MX6SLL
- *
- * Copyright 2021 Andreas Kemnade
- * based on works
- * Copyright 2016 Freescale Semiconductor, Inc.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6sll.dtsi"
-#include "e70k02.dtsi"
-
-/ {
-	model = "Kobo Libra H2O";
-	compatible = "kobo,librah2o", "fsl,imx6sll";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <393216000>;
-};
-
-&cpu0 {
-	arm-supply = <&dcdc3_reg>;
-	soc-supply = <&dcdc1_reg>;
-};
-
-&gpio_keys {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio_keys>;
-};
-
-&i2c1 {
-	pinctrl-names = "default","sleep";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_sleep>;
-};
-
-&i2c2 {
-	pinctrl-names = "default","sleep";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_sleep>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
-		fsl,pins = <
-			MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24	0x17059 /* TP_INT */
-			MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18	0x10059 /* TP_RST */
-		>;
-	};
-
-	pinctrl_gpio_keys: gpio-keysgrp {
-		fsl,pins = <
-			MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25	0x17059	/* PWR_SW */
-			MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23	0x17059	/* HALL_EN */
-			MX6SLL_PAD_KEY_COL4__GPIO4_IO00		0x17059	/* PAGE_UP */
-			MX6SLL_PAD_KEY_COL5__GPIO4_IO02		0x17059	/* PAGE_DOWN */
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6SLL_PAD_LCD_DATA01__GPIO2_IO21	0x79
-			MX6SLL_PAD_LCD_DATA04__GPIO2_IO24	0x79
-			MX6SLL_PAD_LCD_DATA05__GPIO2_IO25	0x79
-			MX6SLL_PAD_LCD_DATA06__GPIO2_IO26	0x79
-			MX6SLL_PAD_LCD_DATA07__GPIO2_IO27	0x79
-			MX6SLL_PAD_LCD_DATA08__GPIO2_IO28	0x79
-			MX6SLL_PAD_LCD_DATA09__GPIO2_IO29	0x79
-			MX6SLL_PAD_LCD_DATA10__GPIO2_IO30	0x79
-			MX6SLL_PAD_LCD_DATA11__GPIO2_IO31	0x79
-			MX6SLL_PAD_LCD_DATA12__GPIO3_IO00	0x79
-			MX6SLL_PAD_LCD_DATA13__GPIO3_IO01	0x79
-			MX6SLL_PAD_LCD_DATA14__GPIO3_IO02	0x79
-			MX6SLL_PAD_LCD_DATA15__GPIO3_IO03	0x79
-			MX6SLL_PAD_LCD_DATA16__GPIO3_IO04	0x79
-			MX6SLL_PAD_LCD_DATA17__GPIO3_IO05	0x79
-			MX6SLL_PAD_LCD_DATA18__GPIO3_IO06	0x79
-			MX6SLL_PAD_LCD_DATA19__GPIO3_IO07	0x79
-			MX6SLL_PAD_LCD_DATA20__GPIO3_IO08	0x79
-			MX6SLL_PAD_LCD_DATA21__GPIO3_IO09	0x79
-			MX6SLL_PAD_LCD_DATA22__GPIO3_IO10	0x79
-			MX6SLL_PAD_LCD_DATA23__GPIO3_IO11	0x79
-			MX6SLL_PAD_LCD_CLK__GPIO2_IO15		0x79
-			MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
-			MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
-			MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
-			MX6SLL_PAD_LCD_RESET__GPIO2_IO19	0x79
-			MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21	0x79
-			MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26	0x79
-			MX6SLL_PAD_KEY_COL3__GPIO3_IO30		0x79
-			MX6SLL_PAD_KEY_ROW7__GPIO4_IO07		0x79
-			MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6SLL_PAD_I2C1_SCL__I2C1_SCL   0x4001f8b1
-			MX6SLL_PAD_I2C1_SDA__I2C1_SDA   0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c1_sleep: i2c1grp-sleep {
-		fsl,pins = <
-			MX6SLL_PAD_I2C1_SCL__I2C1_SCL   0x400108b1
-			MX6SLL_PAD_I2C1_SDA__I2C1_SDA   0x400108b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6SLL_PAD_I2C2_SCL__I2C2_SCL   0x4001f8b1
-			MX6SLL_PAD_I2C2_SDA__I2C2_SDA   0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c2_sleep: i2c2grp-sleep {
-		fsl,pins = <
-			MX6SLL_PAD_I2C2_SCL__I2C2_SCL   0x400108b1
-			MX6SLL_PAD_I2C2_SDA__I2C2_SDA   0x400108b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
-			MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17	0x10059
-		>;
-	};
-
-	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
-		fsl,pins = <
-			MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10   0x10059 /* HWEN */
-		>;
-	};
-
-	pinctrl_ricoh_gpio: ricoh-gpiogrp {
-		fsl,pins = <
-			MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20	0x1b8b1 /* ricoh619 chg */
-			MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19	0x1b8b1 /* ricoh619 irq */
-			MX6SLL_PAD_KEY_COL2__GPIO3_IO28		0x1b8b1 /* ricoh619 bat_low_int */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
-			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
-			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x17059
-			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
-			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
-			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
-			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
-			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x17059
-			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x17059
-			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x17059
-			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
-			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x170b9
-			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
-			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
-			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
-			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
-			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x170b9
-			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x170b9
-			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x170b9
-			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
-			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x170f9
-			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
-			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
-			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
-			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
-			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x170b9
-			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x170b9
-			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x170b9
-			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x10059
-			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x10059
-			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x10059
-			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x10059
-			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x10059
-			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x10059
-			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x10059
-			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x10059
-			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x10059
-			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x10059
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x11059
-			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x11059
-			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x11059
-			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x11059
-			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x11059
-			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x11059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
-			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170b9
-			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170b9
-			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170b9
-			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170b9
-			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
-			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170f9
-			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170f9
-			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170f9
-			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170f9
-			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
-			MX6SLL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
-			MX6SLL_PAD_SD3_DATA0__GPIO5_IO19	0x100c1
-			MX6SLL_PAD_SD3_DATA1__GPIO5_IO20	0x100c1
-			MX6SLL_PAD_SD3_DATA2__GPIO5_IO16	0x100c1
-			MX6SLL_PAD_SD3_DATA3__GPIO5_IO17	0x100c1
-		>;
-	};
-
-	pinctrl_wifi_power: wifi-powergrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD2_DATA6__GPIO4_IO29	0x10059	 /* WIFI_3V3_ON */
-		>;
-	};
-
-	pinctrl_wifi_reset: wifi-resetgrp {
-		fsl,pins = <
-			MX6SLL_PAD_SD2_DATA7__GPIO5_IO00	0x10059	 /* WIFI_RST */
-		>;
-	};
-};
-
-&leds {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_led>;
-};
-
-&lm3630a {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
-};
-
-&reg_wifi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wifi_power>;
-};
-
-&ricoh619 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ricoh_gpio>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc1_sleep>;
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
-};
-
-&wifi_pwrseq {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wifi_reset>;
-};
diff --git a/arch/arm/boot/dts/imx6sll-pinfunc.h b/arch/arm/boot/dts/imx6sll-pinfunc.h
deleted file mode 100644
index 713a346f4c891..0000000000000
--- a/arch/arm/boot/dts/imx6sll-pinfunc.h
+++ /dev/null
@@ -1,880 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2017-2018 NXP.
- *
- */
-
-#ifndef __DTS_IMX6SLL_PINFUNC_H
-#define __DTS_IMX6SLL_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6SLL_PAD_WDOG_B__WDOG1_B                                0x0014 0x02DC 0x0000 0x0 0x0
-#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB                      0x0014 0x02DC 0x0000 0x1 0x0
-#define MX6SLL_PAD_WDOG_B__UART5_RI_B                             0x0014 0x02DC 0x0000 0x2 0x0
-#define MX6SLL_PAD_WDOG_B__GPIO3_IO18                             0x0014 0x02DC 0x0000 0x5 0x0
-#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M               0x0018 0x02E0 0x0000 0x0 0x0
-#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL                          0x0018 0x02E0 0x068C 0x1 0x0
-#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT                          0x0018 0x02E0 0x0000 0x2 0x0
-#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID                       0x0018 0x02E0 0x0560 0x3 0x0
-#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY                    0x0018 0x02E0 0x05AC 0x4 0x0
-#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21                        0x0018 0x02E0 0x0000 0x5 0x0
-#define MX6SLL_PAD_REF_CLK_24M__SD3_WP                            0x0018 0x02E0 0x0794 0x6 0x0
-#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K               0x001C 0x02E4 0x0000 0x0 0x0
-#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA                          0x001C 0x02E4 0x0690 0x1 0x0
-#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT                          0x001C 0x02E4 0x0000 0x2 0x0
-#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID                       0x001C 0x02E4 0x055C 0x3 0x0
-#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL                          0x001C 0x02E4 0x0000 0x4 0x0
-#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22                        0x001C 0x02E4 0x0000 0x5 0x0
-#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B                          0x001C 0x02E4 0x0780 0x6 0x0
-#define MX6SLL_PAD_PWM1__PWM1_OUT                                 0x0020 0x02E8 0x0000 0x0 0x0
-#define MX6SLL_PAD_PWM1__CCM_CLKO                                 0x0020 0x02E8 0x0000 0x1 0x0
-#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT                            0x0020 0x02E8 0x0000 0x2 0x0
-#define MX6SLL_PAD_PWM1__CSI_MCLK                                 0x0020 0x02E8 0x0000 0x4 0x0
-#define MX6SLL_PAD_PWM1__GPIO3_IO23                               0x0020 0x02E8 0x0000 0x5 0x0
-#define MX6SLL_PAD_PWM1__EPIT1_OUT                                0x0020 0x02E8 0x0000 0x6 0x0
-#define MX6SLL_PAD_KEY_COL0__KEY_COL0                             0x0024 0x02EC 0x06A0 0x0 0x0
-#define MX6SLL_PAD_KEY_COL0__I2C2_SCL                             0x0024 0x02EC 0x0684 0x1 0x0
-#define MX6SLL_PAD_KEY_COL0__LCD_DATA00                           0x0024 0x02EC 0x06D8 0x2 0x0
-#define MX6SLL_PAD_KEY_COL0__SD1_CD_B                             0x0024 0x02EC 0x0770 0x4 0x1
-#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24                           0x0024 0x02EC 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0                             0x0028 0x02F0 0x06C0 0x0 0x0
-#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA                             0x0028 0x02F0 0x0688 0x1 0x0
-#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01                           0x0028 0x02F0 0x06DC 0x2 0x0
-#define MX6SLL_PAD_KEY_ROW0__SD1_WP                               0x0028 0x02F0 0x0774 0x4 0x1
-#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25                           0x0028 0x02F0 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_COL1__KEY_COL1                             0x002C 0x02F4 0x06A4 0x0 0x0
-#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI                          0x002C 0x02F4 0x0658 0x1 0x1
-#define MX6SLL_PAD_KEY_COL1__LCD_DATA02                           0x002C 0x02F4 0x06E0 0x2 0x0
-#define MX6SLL_PAD_KEY_COL1__SD3_DATA4                            0x002C 0x02F4 0x0784 0x4 0x0
-#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26                           0x002C 0x02F4 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1                             0x0030 0x02F8 0x06C4 0x0 0x0
-#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO                          0x0030 0x02F8 0x0654 0x1 0x1
-#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03                           0x0030 0x02F8 0x06E4 0x2 0x0
-#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD                            0x0030 0x02F8 0x0000 0x3 0x0
-#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5                            0x0030 0x02F8 0x0788 0x4 0x0
-#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27                           0x0030 0x02F8 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_COL2__KEY_COL2                             0x0034 0x02FC 0x06A8 0x0 0x0
-#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0                           0x0034 0x02FC 0x065C 0x1 0x1
-#define MX6SLL_PAD_KEY_COL2__LCD_DATA04                           0x0034 0x02FC 0x06E8 0x2 0x0
-#define MX6SLL_PAD_KEY_COL2__CSI_DATA12                           0x0034 0x02FC 0x05B8 0x3 0x1
-#define MX6SLL_PAD_KEY_COL2__SD3_DATA6                            0x0034 0x02FC 0x078C 0x4 0x0
-#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28                           0x0034 0x02FC 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2                             0x0038 0x0300 0x06C8 0x0 0x0
-#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK                          0x0038 0x0300 0x0650 0x1 0x1
-#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05                           0x0038 0x0300 0x06EC 0x2 0x0
-#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13                           0x0038 0x0300 0x05BC 0x3 0x1
-#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7                            0x0038 0x0300 0x0790 0x4 0x0
-#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29                           0x0038 0x0300 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_COL3__KEY_COL3                             0x003C 0x0304 0x06AC 0x0 0x0
-#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS                            0x003C 0x0304 0x05A0 0x1 0x1
-#define MX6SLL_PAD_KEY_COL3__LCD_DATA06                           0x003C 0x0304 0x06F0 0x2 0x0
-#define MX6SLL_PAD_KEY_COL3__CSI_DATA14                           0x003C 0x0304 0x05C0 0x3 0x1
-#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30                           0x003C 0x0304 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_COL3__SD1_RESET                            0x003C 0x0304 0x0000 0x6 0x0
-#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3                             0x0040 0x0308 0x06CC 0x0 0x1
-#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC                             0x0040 0x0308 0x059C 0x1 0x1
-#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07                           0x0040 0x0308 0x06F4 0x2 0x1
-#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15                           0x0040 0x0308 0x05C4 0x3 0x2
-#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31                           0x0040 0x0308 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT                          0x0040 0x0308 0x0000 0x6 0x0
-#define MX6SLL_PAD_KEY_COL4__KEY_COL4                             0x0044 0x030C 0x06B0 0x0 0x1
-#define MX6SLL_PAD_KEY_COL4__AUD6_RXD                             0x0044 0x030C 0x0594 0x1 0x1
-#define MX6SLL_PAD_KEY_COL4__LCD_DATA08                           0x0044 0x030C 0x06F8 0x2 0x1
-#define MX6SLL_PAD_KEY_COL4__CSI_DATA16                           0x0044 0x030C 0x0000 0x3 0x0
-#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00                           0x0044 0x030C 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR                         0x0044 0x030C 0x0000 0x6 0x0
-#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4                             0x0048 0x0310 0x06D0 0x0 0x1
-#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC                             0x0048 0x0310 0x05A4 0x1 0x1
-#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09                           0x0048 0x0310 0x06FC 0x2 0x1
-#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17                           0x0048 0x0310 0x0000 0x3 0x0
-#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01                           0x0048 0x0310 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC                          0x0048 0x0310 0x076C 0x6 0x2
-#define MX6SLL_PAD_KEY_COL5__KEY_COL5                             0x004C 0x0314 0x0694 0x0 0x1
-#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS                            0x004C 0x0314 0x05A8 0x1 0x1
-#define MX6SLL_PAD_KEY_COL5__LCD_DATA10                           0x004C 0x0314 0x0700 0x2 0x0
-#define MX6SLL_PAD_KEY_COL5__CSI_DATA18                           0x004C 0x0314 0x0000 0x3 0x0
-#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02                           0x004C 0x0314 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR                         0x004C 0x0314 0x0000 0x6 0x0
-#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5                             0x0050 0x0318 0x06B4 0x0 0x2
-#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD                             0x0050 0x0318 0x0598 0x1 0x1
-#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11                           0x0050 0x0318 0x0704 0x2 0x1
-#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19                           0x0050 0x0318 0x0000 0x3 0x0
-#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03                           0x0050 0x0318 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC                          0x0050 0x0318 0x0768 0x6 0x3
-#define MX6SLL_PAD_KEY_COL6__KEY_COL6                             0x0054 0x031C 0x0698 0x0 0x2
-#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX                         0x0054 0x031C 0x075C 0x1 0x2
-#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX                         0x0054 0x031C 0x0000 0x1 0x0
-#define MX6SLL_PAD_KEY_COL6__LCD_DATA12                           0x0054 0x031C 0x0708 0x2 0x1
-#define MX6SLL_PAD_KEY_COL6__CSI_DATA20                           0x0054 0x031C 0x0000 0x3 0x0
-#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04                           0x0054 0x031C 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_COL6__SD3_RESET                            0x0054 0x031C 0x0000 0x6 0x0
-#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6                             0x0058 0x0320 0x06B8 0x0 0x2
-#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX                         0x0058 0x0320 0x0000 0x1 0x0
-#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX                         0x0058 0x0320 0x075C 0x1 0x3
-#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13                           0x0058 0x0320 0x070C 0x2 0x1
-#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21                           0x0058 0x0320 0x0000 0x3 0x0
-#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05                           0x0058 0x0320 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT                          0x0058 0x0320 0x0000 0x6 0x0
-#define MX6SLL_PAD_KEY_COL7__KEY_COL7                             0x005C 0x0324 0x069C 0x0 0x2
-#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS                        0x005C 0x0324 0x0758 0x1 0x2
-#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS                        0x005C 0x0324 0x0000 0x1 0x0
-#define MX6SLL_PAD_KEY_COL7__LCD_DATA14                           0x005C 0x0324 0x0710 0x2 0x1
-#define MX6SLL_PAD_KEY_COL7__CSI_DATA22                           0x005C 0x0324 0x0000 0x3 0x0
-#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06                           0x005C 0x0324 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_COL7__SD1_WP                               0x005C 0x0324 0x0774 0x6 0x3
-#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7                             0x0060 0x0328 0x06BC 0x0 0x2
-#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS                        0x0060 0x0328 0x0000 0x1 0x0
-#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS                        0x0060 0x0328 0x0758 0x1 0x3
-#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15                           0x0060 0x0328 0x0714 0x2 0x1
-#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23                           0x0060 0x0328 0x0000 0x3 0x0
-#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07                           0x0060 0x0328 0x0000 0x5 0x0
-#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B                             0x0060 0x0328 0x0770 0x6 0x3
-#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00                       0x0064 0x032C 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI                       0x0064 0x032C 0x0658 0x1 0x2
-#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24                        0x0064 0x032C 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00                        0x0064 0x032C 0x05C8 0x3 0x2
-#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07                        0x0064 0x032C 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01                       0x0068 0x0330 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO                       0x0068 0x0330 0x0654 0x1 0x2
-#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25                        0x0068 0x0330 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01                        0x0068 0x0330 0x05CC 0x3 0x2
-#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08                        0x0068 0x0330 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02                       0x006C 0x0334 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0                        0x006C 0x0334 0x065C 0x1 0x2
-#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26                        0x006C 0x0334 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02                        0x006C 0x0334 0x05D0 0x3 0x2
-#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09                        0x006C 0x0334 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03                       0x0070 0x0338 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK                       0x0070 0x0338 0x0650 0x1 0x2
-#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27                        0x0070 0x0338 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03                        0x0070 0x0338 0x05D4 0x3 0x2
-#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10                        0x0070 0x0338 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04                       0x0074 0x033C 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1                        0x0074 0x033C 0x0660 0x1 0x1
-#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28                        0x0074 0x033C 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04                        0x0074 0x033C 0x05D8 0x3 0x2
-#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11                        0x0074 0x033C 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05                       0x0078 0x0340 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2                        0x0078 0x0340 0x0664 0x1 0x1
-#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29                        0x0078 0x0340 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05                        0x0078 0x0340 0x05DC 0x3 0x2
-#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12                        0x0078 0x0340 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06                       0x007C 0x0344 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3                        0x007C 0x0344 0x0000 0x1 0x0
-#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30                        0x007C 0x0344 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06                        0x007C 0x0344 0x05E0 0x3 0x2
-#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13                        0x007C 0x0344 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07                       0x0080 0x0348 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY                        0x0080 0x0348 0x0000 0x1 0x0
-#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31                        0x0080 0x0348 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07                        0x0080 0x0348 0x05E4 0x3 0x2
-#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14                        0x0080 0x0348 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08                       0x0084 0x034C 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI                       0x0084 0x034C 0x063C 0x1 0x2
-#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0                    0x0084 0x034C 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15                        0x0084 0x034C 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09                       0x0088 0x0350 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO                       0x0088 0x0350 0x0638 0x1 0x2
-#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1                    0x0088 0x0350 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16                        0x0088 0x0350 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10                       0x008C 0x0354 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0                        0x008C 0x0354 0x0648 0x1 0x2
-#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2                    0x008C 0x0354 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17                        0x008C 0x0354 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11                       0x0090 0x0358 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK                       0x0090 0x0358 0x0630 0x1 0x2
-#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3                    0x0090 0x0358 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18                        0x0090 0x0358 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12                       0x0094 0x035C 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX                      0x0094 0x035C 0x074C 0x1 0x4
-#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX                      0x0094 0x035C 0x0000 0x1 0x0
-#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM                      0x0094 0x035C 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19                        0x0094 0x035C 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1                        0x0094 0x035C 0x064C 0x6 0x1
-#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13                       0x0098 0x0360 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX                      0x0098 0x0360 0x0000 0x1 0x0
-#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX                      0x0098 0x0360 0x074C 0x1 0x5
-#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ                      0x0098 0x0360 0x0668 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20                        0x0098 0x0360 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2                        0x0098 0x0360 0x0640 0x6 0x1
-#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14                       0x009C 0x0364 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS                     0x009C 0x0364 0x0748 0x1 0x4
-#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS                     0x009C 0x0364 0x0000 0x1 0x0
-#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT                     0x009C 0x0364 0x066C 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21                        0x009C 0x0364 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3                        0x009C 0x0364 0x0644 0x6 0x1
-#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15                       0x00A0 0x0368 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS                     0x00A0 0x0368 0x0000 0x1 0x0
-#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS                     0x00A0 0x0368 0x0748 0x1 0x5
-#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE                     0x00A0 0x0368 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22                        0x00A0 0x0368 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY                        0x00A0 0x0368 0x0634 0x6 0x1
-#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P                       0x00A4 0x036C 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI                        0x00A4 0x036C 0x0624 0x1 0x2
-#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL                           0x00A4 0x036C 0x0684 0x2 0x2
-#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08                         0x00A4 0x036C 0x05E8 0x3 0x2
-#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23                         0x00A4 0x036C 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE                           0x00A8 0x0370 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO                         0x00A8 0x0370 0x0620 0x1 0x2
-#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA                            0x00A8 0x0370 0x0688 0x2 0x2
-#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09                          0x00A8 0x0370 0x05EC 0x3 0x2
-#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24                          0x00A8 0x0370 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE                           0x00AC 0x0374 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0                          0x00AC 0x0374 0x0628 0x1 0x1
-#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10                          0x00AC 0x0374 0x05B0 0x3 0x2
-#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25                          0x00AC 0x0374 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR                         0x00B0 0x0378 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK                        0x00B0 0x0378 0x061C 0x1 0x2
-#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4                         0x00B0 0x0378 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11                         0x00B0 0x0378 0x05B4 0x3 0x2
-#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26                         0x00B0 0x0378 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0                         0x00B4 0x037C 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1                         0x00B4 0x037C 0x062C 0x1 0x1
-#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT                           0x00B4 0x037C 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27                         0x00B4 0x037C 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1                         0x00B8 0x0380 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B                            0x00B8 0x0380 0x0000 0x1 0x0
-#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT                           0x00B8 0x0380 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28                         0x00B8 0x0380 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2                         0x00BC 0x0384 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL                           0x00BC 0x0384 0x068C 0x1 0x2
-#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT                           0x00BC 0x0384 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29                         0x00BC 0x0384 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3                         0x00C0 0x0388 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA                           0x00C0 0x0388 0x0690 0x1 0x2
-#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT                           0x00C0 0x0388 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30                         0x00C0 0x0388 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK                         0x00C4 0x038C 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2                         0x00C4 0x038C 0x0000 0x1 0x0
-#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK                         0x00C4 0x038C 0x05F4 0x3 0x2
-#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31                         0x00C4 0x038C 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET                          0x00C4 0x038C 0x0000 0x6 0x0
-#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE                           0x00C8 0x0390 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3                          0x00C8 0x0390 0x0000 0x1 0x0
-#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC                           0x00C8 0x0390 0x05F0 0x3 0x2
-#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00                          0x00C8 0x0390 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT                         0x00C8 0x0390 0x0000 0x6 0x0
-#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL                           0x00CC 0x0394 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY                          0x00CC 0x0394 0x0000 0x1 0x0
-#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK                            0x00CC 0x0394 0x0000 0x3 0x0
-#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01                          0x00CC 0x0394 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_GDRL__SD2_WP                              0x00CC 0x0394 0x077C 0x6 0x2
-#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP                           0x00D0 0x0398 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT                            0x00D0 0x0398 0x0000 0x1 0x0
-#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC                           0x00D0 0x0398 0x05F8 0x3 0x2
-#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02                          0x00D0 0x0398 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B                            0x00D0 0x0398 0x0778 0x6 0x2
-#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0                         0x00D4 0x039C 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS                          0x00D4 0x039C 0x0588 0x1 0x1
-#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX                       0x00D4 0x039C 0x0754 0x2 0x4
-#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX                       0x00D4 0x039C 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03                         0x00D4 0x039C 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5                         0x00D4 0x039C 0x0000 0x6 0x0
-#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1                         0x00D8 0x03A0 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD                           0x00D8 0x03A0 0x057C 0x1 0x1
-#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX                       0x00D8 0x03A0 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX                       0x00D8 0x03A0 0x0754 0x2 0x5
-#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04                         0x00D8 0x03A0 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6                         0x00D8 0x03A0 0x0000 0x6 0x0
-#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0                           0x00DC 0x03A4 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS                       0x00DC 0x03A4 0x0750 0x2 0x2
-#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS                       0x00DC 0x03A4 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05                          0x00DC 0x03A4 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7                          0x00DC 0x03A4 0x0000 0x6 0x0
-#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1                           0x00E0 0x03A8 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS                       0x00E0 0x03A8 0x0000 0x2 0x0
-#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS                       0x00E0 0x03A8 0x0750 0x2 0x3
-#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06                          0x00E0 0x03A8 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8                          0x00E0 0x03A8 0x0000 0x6 0x0
-#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0                 0x00E4 0x03AC 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC                       0x00E4 0x03AC 0x0584 0x1 0x1
-#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16                     0x00E4 0x03AC 0x0718 0x2 0x1
-#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07                     0x00E4 0x03AC 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1                 0x00E8 0x03B0 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS                      0x00E8 0x03B0 0x0590 0x1 0x1
-#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17                     0x00E8 0x03B0 0x071C 0x2 0x1
-#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08                     0x00E8 0x03B0 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2                 0x00EC 0x03B4 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD                       0x00EC 0x03B4 0x0580 0x1 0x1
-#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18                     0x00EC 0x03B4 0x0720 0x2 0x1
-#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09                     0x00EC 0x03B4 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3                 0x00F0 0x03B8 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC                       0x00F0 0x03B8 0x058C 0x1 0x1
-#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19                     0x00F0 0x03B8 0x0724 0x2 0x1
-#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10                     0x00F0 0x03B8 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM                     0x00F4 0x03BC 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20                       0x00F4 0x03BC 0x0728 0x2 0x1
-#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID                      0x00F4 0x03BC 0x055C 0x4 0x4
-#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11                       0x00F4 0x03BC 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET                        0x00F4 0x03BC 0x0000 0x6 0x0
-#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ                     0x00F8 0x03C0 0x0668 0x0 0x1
-#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21                       0x00F8 0x03C0 0x072C 0x2 0x1
-#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID                      0x00F8 0x03C0 0x0560 0x4 0x3
-#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12                       0x00F8 0x03C0 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT                      0x00F8 0x03C0 0x0000 0x6 0x0
-#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                   0x00FC 0x03C4 0x066C 0x0 0x1
-#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22                      0x00FC 0x03C4 0x0730 0x2 0x1
-#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI                      0x00FC 0x03C4 0x0000 0x4 0x0
-#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13                      0x00FC 0x03C4 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP                          0x00FC 0x03C4 0x0794 0x6 0x2
-#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE                   0x0100 0x03C8 0x0000 0x0 0x0
-#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23                      0x0100 0x03C8 0x0734 0x2 0x1
-#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO                      0x0100 0x03C8 0x0000 0x4 0x0
-#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14                      0x0100 0x03C8 0x0000 0x5 0x0
-#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B                        0x0100 0x03C8 0x0780 0x6 0x2
-#define MX6SLL_PAD_LCD_CLK__LCD_CLK                               0x0104 0x03CC 0x0000 0x0 0x0
-#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN                            0x0104 0x03CC 0x0000 0x2 0x0
-#define MX6SLL_PAD_LCD_CLK__PWM4_OUT                              0x0104 0x03CC 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15                            0x0104 0x03CC 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE                         0x0108 0x03D0 0x0000 0x0 0x0
-#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E                           0x0108 0x03D0 0x0000 0x2 0x0
-#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX                       0x0108 0x03D0 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX                       0x0108 0x03D0 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16                         0x0108 0x03D0 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC                           0x010C 0x03D4 0x06D4 0x0 0x0
-#define MX6SLL_PAD_LCD_HSYNC__LCD_CS                              0x010C 0x03D4 0x0000 0x2 0x0
-#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX                        0x010C 0x03D4 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX                        0x010C 0x03D4 0x074C 0x4 0x1
-#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17                          0x010C 0x03D4 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK                       0x010C 0x03D4 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC                           0x0110 0x03D8 0x0000 0x0 0x0
-#define MX6SLL_PAD_LCD_VSYNC__LCD_RS                              0x0110 0x03D8 0x0000 0x2 0x0
-#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS                       0x0110 0x03D8 0x0748 0x4 0x0
-#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS                       0x0110 0x03D8 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18                          0x0110 0x03D8 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL                       0x0110 0x03D8 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_RESET__LCD_RESET                           0x0114 0x03DC 0x0000 0x0 0x0
-#define MX6SLL_PAD_LCD_RESET__LCD_BUSY                            0x0114 0x03DC 0x06D4 0x2 0x1
-#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS                       0x0114 0x03DC 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS                       0x0114 0x03DC 0x0748 0x4 0x1
-#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19                          0x0114 0x03DC 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY                      0x0114 0x03DC 0x05AC 0x6 0x2
-#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00                         0x0118 0x03E0 0x06D8 0x0 0x1
-#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI                        0x0118 0x03E0 0x0608 0x1 0x0
-#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID                        0x0118 0x03E0 0x0560 0x2 0x2
-#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT                           0x0118 0x03E0 0x0000 0x3 0x0
-#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B                        0x0118 0x03E0 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20                         0x0118 0x03E0 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00                        0x0118 0x03E0 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00                     0x0118 0x03E0 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01                         0x011C 0x03E4 0x06DC 0x0 0x1
-#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO                        0x011C 0x03E4 0x0604 0x1 0x0
-#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID                        0x011C 0x03E4 0x055C 0x2 0x3
-#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT                           0x011C 0x03E4 0x0000 0x3 0x0
-#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS                          0x011C 0x03E4 0x0570 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21                         0x011C 0x03E4 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01                        0x011C 0x03E4 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01                     0x011C 0x03E4 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02                         0x0120 0x03E8 0x06E0 0x0 0x1
-#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0                         0x0120 0x03E8 0x0614 0x1 0x0
-#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT                          0x0120 0x03E8 0x0000 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT                           0x0120 0x03E8 0x0000 0x3 0x0
-#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC                           0x0120 0x03E8 0x056C 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22                         0x0120 0x03E8 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02                        0x0120 0x03E8 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02                     0x0120 0x03E8 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03                         0x0124 0x03EC 0x06E4 0x0 0x1
-#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK                        0x0124 0x03EC 0x05FC 0x1 0x0
-#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B                        0x0124 0x03EC 0x0000 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT                           0x0124 0x03EC 0x0000 0x3 0x0
-#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD                           0x0124 0x03EC 0x0564 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23                         0x0124 0x03EC 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03                        0x0124 0x03EC 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03                     0x0124 0x03EC 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04                         0x0128 0x03F0 0x06E8 0x0 0x1
-#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1                         0x0128 0x03F0 0x060C 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC                          0x0128 0x03F0 0x05F8 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB                  0x0128 0x03F0 0x0000 0x3 0x0
-#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC                           0x0128 0x03F0 0x0574 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24                         0x0128 0x03F0 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04                        0x0128 0x03F0 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04                     0x0128 0x03F0 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05                         0x012C 0x03F4 0x06EC 0x0 0x1
-#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2                         0x012C 0x03F4 0x0610 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC                          0x012C 0x03F4 0x05F0 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS                          0x012C 0x03F4 0x0578 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25                         0x012C 0x03F4 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05                        0x012C 0x03F4 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05                     0x012C 0x03F4 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06                         0x0130 0x03F8 0x06F0 0x0 0x1
-#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3                         0x0130 0x03F8 0x0618 0x1 0x0
-#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK                         0x0130 0x03F8 0x05F4 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD                           0x0130 0x03F8 0x0568 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26                         0x0130 0x03F8 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06                        0x0130 0x03F8 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06                     0x0130 0x03F8 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07                         0x0134 0x03FC 0x06F4 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY                         0x0134 0x03FC 0x0600 0x1 0x0
-#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK                           0x0134 0x03FC 0x0000 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT                      0x0134 0x03FC 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27                         0x0134 0x03FC 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07                        0x0134 0x03FC 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07                     0x0134 0x03FC 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08                         0x0138 0x0400 0x06F8 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA08__KEY_COL0                           0x0138 0x0400 0x06A0 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09                         0x0138 0x0400 0x05EC 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK                        0x0138 0x0400 0x061C 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28                         0x0138 0x0400 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08                        0x0138 0x0400 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08                     0x0138 0x0400 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09                         0x013C 0x0404 0x06FC 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0                           0x013C 0x0404 0x06C0 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08                         0x013C 0x0404 0x05E8 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI                        0x013C 0x0404 0x0624 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29                         0x013C 0x0404 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09                        0x013C 0x0404 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09                     0x013C 0x0404 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10                         0x0140 0x0408 0x0700 0x0 0x1
-#define MX6SLL_PAD_LCD_DATA10__KEY_COL1                           0x0140 0x0408 0x06A4 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07                         0x0140 0x0408 0x05E4 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO                        0x0140 0x0408 0x0620 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30                         0x0140 0x0408 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10                        0x0140 0x0408 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10                     0x0140 0x0408 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11                         0x0144 0x040C 0x0704 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1                           0x0144 0x040C 0x06C4 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06                         0x0144 0x040C 0x05E0 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1                         0x0144 0x040C 0x062C 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31                         0x0144 0x040C 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11                        0x0144 0x040C 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11                     0x0144 0x040C 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12                         0x0148 0x0410 0x0708 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA12__KEY_COL2                           0x0148 0x0410 0x06A8 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05                         0x0148 0x0410 0x05DC 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS                      0x0148 0x0410 0x0760 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS                      0x0148 0x0410 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00                         0x0148 0x0410 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12                        0x0148 0x0410 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12                     0x0148 0x0410 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13                         0x014C 0x0414 0x070C 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2                           0x014C 0x0414 0x06C8 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04                         0x014C 0x0414 0x05D8 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS                      0x014C 0x0414 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS                      0x014C 0x0414 0x0760 0x4 0x1
-#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01                         0x014C 0x0414 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13                        0x014C 0x0414 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13                     0x014C 0x0414 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14                         0x0150 0x0418 0x0710 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA14__KEY_COL3                           0x0150 0x0418 0x06AC 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03                         0x0150 0x0418 0x05D4 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX                       0x0150 0x0418 0x0764 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX                       0x0150 0x0418 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02                         0x0150 0x0418 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14                        0x0150 0x0418 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14                     0x0150 0x0418 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15                         0x0154 0x041C 0x0714 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3                           0x0154 0x041C 0x06CC 0x1 0x0
-#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02                         0x0154 0x041C 0x05D0 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX                       0x0154 0x041C 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX                       0x0154 0x041C 0x0764 0x4 0x1
-#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03                         0x0154 0x041C 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15                        0x0154 0x041C 0x0000 0x6 0x0
-#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15                     0x0154 0x041C 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16                         0x0158 0x0420 0x0718 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA16__KEY_COL4                           0x0158 0x0420 0x06B0 0x1 0x0
-#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01                         0x0158 0x0420 0x05CC 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL                           0x0158 0x0420 0x0684 0x4 0x1
-#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04                         0x0158 0x0420 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24                     0x0158 0x0420 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17                         0x015C 0x0424 0x071C 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4                           0x015C 0x0424 0x06D0 0x1 0x0
-#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00                         0x015C 0x0424 0x05C8 0x2 0x0
-#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA                           0x015C 0x0424 0x0688 0x4 0x1
-#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05                         0x015C 0x0424 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25                     0x015C 0x0424 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18                         0x0160 0x0428 0x0720 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA18__KEY_COL5                           0x0160 0x0428 0x0694 0x1 0x2
-#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15                         0x0160 0x0428 0x05C4 0x2 0x1
-#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1                       0x0160 0x0428 0x0670 0x4 0x1
-#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06                         0x0160 0x0428 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26                     0x0160 0x0428 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19                         0x0164 0x042C 0x0724 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5                           0x0164 0x042C 0x06B4 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14                         0x0164 0x042C 0x05C0 0x2 0x2
-#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2                       0x0164 0x042C 0x0674 0x4 0x1
-#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07                         0x0164 0x042C 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27                     0x0164 0x042C 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20                         0x0168 0x0430 0x0728 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA20__KEY_COL6                           0x0168 0x0430 0x0698 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13                         0x0168 0x0430 0x05BC 0x2 0x2
-#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1                       0x0168 0x0430 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08                         0x0168 0x0430 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28                     0x0168 0x0430 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21                         0x016C 0x0434 0x072C 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6                           0x016C 0x0434 0x06B8 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12                         0x016C 0x0434 0x05B8 0x2 0x2
-#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2                       0x016C 0x0434 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09                         0x016C 0x0434 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29                     0x016C 0x0434 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22                         0x0170 0x0438 0x0730 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA22__KEY_COL7                           0x0170 0x0438 0x069C 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11                         0x0170 0x0438 0x05B4 0x2 0x1
-#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3                       0x0170 0x0438 0x0000 0x4 0x0
-#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10                         0x0170 0x0438 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30                     0x0170 0x0438 0x0000 0x7 0x0
-#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23                         0x0174 0x043C 0x0734 0x0 0x0
-#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7                           0x0174 0x043C 0x06BC 0x1 0x1
-#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10                         0x0174 0x043C 0x05B0 0x2 0x1
-#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN                          0x0174 0x043C 0x0678 0x4 0x1
-#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11                         0x0174 0x043C 0x0000 0x5 0x0
-#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31                     0x0174 0x043C 0x0000 0x7 0x0
-#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS                            0x0178 0x0440 0x0000 0x0 0x0
-#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL                             0x0178 0x0440 0x067C 0x1 0x1
-#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX                         0x0178 0x0440 0x0754 0x2 0x0
-#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX                         0x0178 0x0440 0x0000 0x2 0x0
-#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL                             0x0178 0x0440 0x068C 0x4 0x1
-#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00                           0x0178 0x0440 0x0000 0x5 0x0
-#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0                           0x0178 0x0440 0x0648 0x6 0x0
-#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND                           0x0178 0x0440 0x0000 0x7 0x0
-#define MX6SLL_PAD_AUD_RXC__AUD3_RXC                              0x017C 0x0444 0x0000 0x0 0x0
-#define MX6SLL_PAD_AUD_RXC__I2C1_SDA                              0x017C 0x0444 0x0680 0x1 0x1
-#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX                          0x017C 0x0444 0x0000 0x2 0x0
-#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX                          0x017C 0x0444 0x0754 0x2 0x1
-#define MX6SLL_PAD_AUD_RXC__I2C3_SDA                              0x017C 0x0444 0x0690 0x4 0x1
-#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01                            0x017C 0x0444 0x0000 0x5 0x0
-#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1                            0x017C 0x0444 0x064C 0x6 0x0
-#define MX6SLL_PAD_AUD_RXD__AUD3_RXD                              0x0180 0x0448 0x0000 0x0 0x0
-#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI                           0x0180 0x0448 0x063C 0x1 0x0
-#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX                          0x0180 0x0448 0x075C 0x2 0x0
-#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX                          0x0180 0x0448 0x0000 0x2 0x0
-#define MX6SLL_PAD_AUD_RXD__SD1_LCTL                              0x0180 0x0448 0x0000 0x4 0x0
-#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02                            0x0180 0x0448 0x0000 0x5 0x0
-#define MX6SLL_PAD_AUD_TXC__AUD3_TXC                              0x0184 0x044C 0x0000 0x0 0x0
-#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO                           0x0184 0x044C 0x0638 0x1 0x0
-#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX                          0x0184 0x044C 0x0000 0x2 0x0
-#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX                          0x0184 0x044C 0x075C 0x2 0x1
-#define MX6SLL_PAD_AUD_TXC__SD2_LCTL                              0x0184 0x044C 0x0000 0x4 0x0
-#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03                            0x0184 0x044C 0x0000 0x5 0x0
-#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS                            0x0188 0x0450 0x0000 0x0 0x0
-#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT                             0x0188 0x0450 0x0000 0x1 0x0
-#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS                        0x0188 0x0450 0x0758 0x2 0x0
-#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS                        0x0188 0x0450 0x0000 0x2 0x0
-#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL                             0x0188 0x0450 0x0000 0x4 0x0
-#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04                           0x0188 0x0450 0x0000 0x5 0x0
-#define MX6SLL_PAD_AUD_TXD__AUD3_TXD                              0x018C 0x0454 0x0000 0x0 0x0
-#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK                           0x018C 0x0454 0x0630 0x1 0x0
-#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS                         0x018C 0x0454 0x0000 0x2 0x0
-#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS                         0x018C 0x0454 0x0758 0x2 0x1
-#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05                            0x018C 0x0454 0x0000 0x5 0x0
-#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT                        0x0190 0x0458 0x0000 0x0 0x0
-#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT                             0x0190 0x0458 0x0000 0x1 0x0
-#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY                           0x0190 0x0458 0x0634 0x2 0x0
-#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB                    0x0190 0x0458 0x0000 0x4 0x0
-#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06                           0x0190 0x0458 0x0000 0x5 0x0
-#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK                        0x0190 0x0458 0x073C 0x6 0x1
-#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX                        0x0194 0x045C 0x0744 0x0 0x0
-#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX                        0x0194 0x045C 0x0000 0x0 0x0
-#define MX6SLL_PAD_UART1_RXD__PWM1_OUT                            0x0194 0x045C 0x0000 0x1 0x0
-#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX                        0x0194 0x045C 0x075C 0x2 0x4
-#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX                        0x0194 0x045C 0x0000 0x2 0x0
-#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX                        0x0194 0x045C 0x0764 0x4 0x6
-#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX                        0x0194 0x045C 0x0000 0x4 0x0
-#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16                          0x0194 0x045C 0x0000 0x5 0x0
-#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX                        0x0198 0x0460 0x0000 0x0 0x0
-#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX                        0x0198 0x0460 0x0744 0x0 0x1
-#define MX6SLL_PAD_UART1_TXD__PWM2_OUT                            0x0198 0x0460 0x0000 0x1 0x0
-#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX                        0x0198 0x0460 0x0000 0x2 0x0
-#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX                        0x0198 0x0460 0x075C 0x2 0x5
-#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX                        0x0198 0x0460 0x0000 0x4 0x0
-#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX                        0x0198 0x0460 0x0764 0x4 0x7
-#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17                          0x0198 0x0460 0x0000 0x5 0x0
-#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B                         0x0198 0x0460 0x0000 0x7 0x0
-#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL                             0x019C 0x0464 0x067C 0x0 0x0
-#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS                        0x019C 0x0464 0x0740 0x1 0x0
-#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS                        0x019C 0x0464 0x0000 0x1 0x0
-#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2                           0x019C 0x0464 0x0640 0x2 0x0
-#define MX6SLL_PAD_I2C1_SCL__SD3_RESET                            0x019C 0x0464 0x0000 0x4 0x0
-#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12                           0x019C 0x0464 0x0000 0x5 0x0
-#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1                           0x019C 0x0464 0x060C 0x6 0x0
-#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA                             0x01A0 0x0468 0x0680 0x0 0x0
-#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS                        0x01A0 0x0468 0x0000 0x1 0x0
-#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS                        0x01A0 0x0468 0x0740 0x1 0x1
-#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3                           0x01A0 0x0468 0x0644 0x2 0x0
-#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT                          0x01A0 0x0468 0x0000 0x4 0x0
-#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13                           0x01A0 0x0468 0x0000 0x5 0x0
-#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2                           0x01A0 0x0468 0x0610 0x6 0x0
-#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL                             0x01A4 0x046C 0x0684 0x0 0x3
-#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS                            0x01A4 0x046C 0x0570 0x1 0x2
-#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN                             0x01A4 0x046C 0x0738 0x2 0x2
-#define MX6SLL_PAD_I2C2_SCL__SD3_WP                               0x01A4 0x046C 0x0794 0x4 0x3
-#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14                           0x01A4 0x046C 0x0000 0x5 0x0
-#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY                           0x01A4 0x046C 0x0600 0x6 0x1
-#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA                             0x01A8 0x0470 0x0688 0x0 0x3
-#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC                             0x01A8 0x0470 0x056C 0x1 0x2
-#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT                            0x01A8 0x0470 0x0000 0x2 0x0
-#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B                             0x01A8 0x0470 0x0780 0x4 0x3
-#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15                           0x01A8 0x0470 0x0000 0x5 0x0
-#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK                       0x01AC 0x0474 0x05FC 0x0 0x1
-#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD                          0x01AC 0x0474 0x0568 0x1 0x1
-#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX                      0x01AC 0x0474 0x0764 0x2 0x2
-#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX                      0x01AC 0x0474 0x0000 0x2 0x0
-#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0                        0x01AC 0x0474 0x0000 0x3 0x0
-#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET                         0x01AC 0x0474 0x0000 0x4 0x0
-#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08                        0x01AC 0x0474 0x0000 0x5 0x0
-#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC                       0x01AC 0x0474 0x0768 0x6 0x1
-#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI                       0x01B0 0x0478 0x0608 0x0 0x1
-#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC                          0x01B0 0x0478 0x0574 0x1 0x1
-#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX                      0x01B0 0x0478 0x0000 0x2 0x0
-#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX                      0x01B0 0x0478 0x0764 0x2 0x3
-#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1                        0x01B0 0x0478 0x0000 0x3 0x0
-#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT                       0x01B0 0x0478 0x0000 0x4 0x0
-#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09                        0x01B0 0x0478 0x0000 0x5 0x0
-#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO                       0x01B4 0x047C 0x0604 0x0 0x1
-#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS                         0x01B4 0x047C 0x0578 0x1 0x1
-#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS                     0x01B4 0x047C 0x0760 0x2 0x2
-#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS                     0x01B4 0x047C 0x0000 0x2 0x0
-#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0                         0x01B4 0x047C 0x0000 0x3 0x0
-#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP                            0x01B4 0x047C 0x077C 0x4 0x0
-#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10                        0x01B4 0x047C 0x0000 0x5 0x0
-#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0                         0x01B8 0x0480 0x0614 0x0 0x1
-#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD                           0x01B8 0x0480 0x0564 0x1 0x1
-#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS                      0x01B8 0x0480 0x0000 0x2 0x0
-#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS                      0x01B8 0x0480 0x0760 0x2 0x3
-#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1                          0x01B8 0x0480 0x0000 0x3 0x0
-#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B                           0x01B8 0x0480 0x0778 0x4 0x0
-#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11                         0x01B8 0x0480 0x0000 0x5 0x0
-#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR                       0x01B8 0x0480 0x0000 0x6 0x0
-#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK                       0x01BC 0x0484 0x061C 0x0 0x1
-#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK                     0x01BC 0x0484 0x073C 0x1 0x2
-#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX                      0x01BC 0x0484 0x0754 0x2 0x2
-#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX                      0x01BC 0x0484 0x0000 0x2 0x0
-#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK                        0x01BC 0x0484 0x05F4 0x3 0x1
-#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET                         0x01BC 0x0484 0x0000 0x4 0x0
-#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12                        0x01BC 0x0484 0x0000 0x5 0x0
-#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC                       0x01BC 0x0484 0x0768 0x6 0x2
-#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI                       0x01C0 0x0488 0x0624 0x0 0x1
-#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1                   0x01C0 0x0488 0x0000 0x1 0x0
-#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX                      0x01C0 0x0488 0x0000 0x2 0x0
-#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX                      0x01C0 0x0488 0x0754 0x2 0x3
-#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC                         0x01C0 0x0488 0x05F0 0x3 0x1
-#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT                       0x01C0 0x0488 0x0000 0x4 0x0
-#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13                        0x01C0 0x0488 0x0000 0x5 0x0
-#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO                       0x01C4 0x048C 0x0620 0x0 0x1
-#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0                   0x01C4 0x048C 0x0000 0x1 0x0
-#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS                     0x01C4 0x048C 0x0750 0x2 0x0
-#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS                     0x01C4 0x048C 0x0000 0x2 0x0
-#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK                          0x01C4 0x048C 0x0000 0x3 0x0
-#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP                            0x01C4 0x048C 0x0774 0x4 0x2
-#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14                        0x01C4 0x048C 0x0000 0x5 0x0
-#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC                       0x01C4 0x048C 0x076C 0x6 0x1
-#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0                         0x01C8 0x0490 0x0628 0x0 0x0
-#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3                         0x01C8 0x0490 0x0618 0x1 0x1
-#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS                      0x01C8 0x0490 0x0000 0x2 0x0
-#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS                      0x01C8 0x0490 0x0750 0x2 0x1
-#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC                          0x01C8 0x0490 0x05F8 0x3 0x1
-#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B                           0x01C8 0x0490 0x0770 0x4 0x2
-#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15                         0x01C8 0x0490 0x0000 0x5 0x0
-#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR                       0x01C8 0x0490 0x0000 0x6 0x0
-#define MX6SLL_PAD_SD1_CLK__SD1_CLK                               0x01CC 0x0494 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD1_CLK__KEY_COL0                              0x01CC 0x0494 0x06A0 0x2 0x2
-#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4                            0x01CC 0x0494 0x0000 0x3 0x0
-#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15                            0x01CC 0x0494 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD1_CMD__SD1_CMD                               0x01D0 0x0498 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD1_CMD__KEY_ROW0                              0x01D0 0x0498 0x06C0 0x2 0x2
-#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5                            0x01D0 0x0498 0x0000 0x3 0x0
-#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14                            0x01D0 0x0498 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0                           0x01D4 0x049C 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD1_DATA0__KEY_COL1                            0x01D4 0x049C 0x06A4 0x2 0x2
-#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6                          0x01D4 0x049C 0x0000 0x3 0x0
-#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11                          0x01D4 0x049C 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1                           0x01D8 0x04A0 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1                            0x01D8 0x04A0 0x06C4 0x2 0x2
-#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7                          0x01D8 0x04A0 0x0000 0x3 0x0
-#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08                          0x01D8 0x04A0 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2                           0x01DC 0x04A4 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD1_DATA2__KEY_COL2                            0x01DC 0x04A4 0x06A8 0x2 0x2
-#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8                          0x01DC 0x04A4 0x0000 0x3 0x0
-#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                          0x01DC 0x04A4 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3                           0x01E0 0x04A8 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2                            0x01E0 0x04A8 0x06C8 0x2 0x2
-#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9                          0x01E0 0x04A8 0x0000 0x3 0x0
-#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                          0x01E0 0x04A8 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4                           0x01E4 0x04AC 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD1_DATA4__KEY_COL3                            0x01E4 0x04AC 0x06AC 0x2 0x2
-#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N                        0x01E4 0x04AC 0x0000 0x3 0x0
-#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX                        0x01E4 0x04AC 0x075C 0x4 0x6
-#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX                        0x01E4 0x04AC 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12                          0x01E4 0x04AC 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5                           0x01E8 0x04B0 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3                            0x01E8 0x04B0 0x06CC 0x2 0x2
-#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED                          0x01E8 0x04B0 0x0000 0x3 0x0
-#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX                        0x01E8 0x04B0 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX                        0x01E8 0x04B0 0x075C 0x4 0x7
-#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09                          0x01E8 0x04B0 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6                           0x01EC 0x04B4 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD1_DATA6__KEY_COL4                            0x01EC 0x04B4 0x06B0 0x2 0x2
-#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ                          0x01EC 0x04B4 0x0000 0x3 0x0
-#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS                       0x01EC 0x04B4 0x0758 0x4 0x4
-#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS                       0x01EC 0x04B4 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07                          0x01EC 0x04B4 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7                           0x01F0 0x04B8 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4                            0x01F0 0x04B8 0x06D0 0x2 0x2
-#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY                      0x01F0 0x04B8 0x05AC 0x3 0x3
-#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS                       0x01F0 0x04B8 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS                       0x01F0 0x04B8 0x0758 0x4 0x5
-#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10                          0x01F0 0x04B8 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD2_RESET__SD2_RESET                           0x01F4 0x04BC 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD2_RESET__WDOG2_B                             0x01F4 0x04BC 0x0000 0x2 0x0
-#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT                           0x01F4 0x04BC 0x0000 0x3 0x0
-#define MX6SLL_PAD_SD2_RESET__CSI_MCLK                            0x01F4 0x04BC 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27                          0x01F4 0x04BC 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD2_CLK__SD2_CLK                               0x01F8 0x04C0 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS                             0x01F8 0x04C0 0x0570 0x1 0x1
-#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK                           0x01F8 0x04C0 0x0630 0x2 0x1
-#define MX6SLL_PAD_SD2_CLK__CSI_DATA00                            0x01F8 0x04C0 0x05C8 0x3 0x1
-#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05                            0x01F8 0x04C0 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD2_CMD__SD2_CMD                               0x01FC 0x04C4 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD2_CMD__AUD4_RXC                              0x01FC 0x04C4 0x056C 0x1 0x1
-#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0                            0x01FC 0x04C4 0x0648 0x2 0x1
-#define MX6SLL_PAD_SD2_CMD__CSI_DATA01                            0x01FC 0x04C4 0x05CC 0x3 0x1
-#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT                             0x01FC 0x04C4 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04                            0x01FC 0x04C4 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0                           0x0200 0x04C8 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD                            0x0200 0x04C8 0x0564 0x1 0x2
-#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI                         0x0200 0x04C8 0x063C 0x2 0x1
-#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02                          0x0200 0x04C8 0x05D0 0x3 0x1
-#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS                       0x0200 0x04C8 0x0760 0x4 0x4
-#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS                       0x0200 0x04C8 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01                          0x0200 0x04C8 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1                           0x0204 0x04CC 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC                            0x0204 0x04CC 0x0574 0x1 0x2
-#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO                         0x0204 0x04CC 0x0638 0x2 0x1
-#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03                          0x0204 0x04CC 0x05D4 0x3 0x1
-#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS                       0x0204 0x04CC 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS                       0x0204 0x04CC 0x0760 0x4 0x5
-#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30                          0x0204 0x04CC 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2                           0x0208 0x04D0 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS                           0x0208 0x04D0 0x0578 0x1 0x2
-#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04                          0x0208 0x04D0 0x05D8 0x3 0x1
-#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX                        0x0208 0x04D0 0x0764 0x4 0x4
-#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX                        0x0208 0x04D0 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03                          0x0208 0x04D0 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3                           0x020C 0x04D4 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD                            0x020C 0x04D4 0x0568 0x1 0x2
-#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05                          0x020C 0x04D4 0x05DC 0x3 0x1
-#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX                        0x020C 0x04D4 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX                        0x020C 0x04D4 0x0764 0x4 0x5
-#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28                          0x020C 0x04D4 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4                           0x0210 0x04D8 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4                           0x0210 0x04D8 0x0784 0x1 0x1
-#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX                        0x0210 0x04D8 0x074C 0x2 0x2
-#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX                        0x0210 0x04D8 0x0000 0x2 0x0
-#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06                          0x0210 0x04D8 0x05E0 0x3 0x1
-#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT                           0x0210 0x04D8 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02                          0x0210 0x04D8 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5                           0x0214 0x04DC 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5                           0x0214 0x04DC 0x0788 0x1 0x1
-#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX                        0x0214 0x04DC 0x0000 0x2 0x0
-#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX                        0x0214 0x04DC 0x074C 0x2 0x3
-#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07                          0x0214 0x04DC 0x05E4 0x3 0x1
-#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN                            0x0214 0x04DC 0x0738 0x4 0x1
-#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31                          0x0214 0x04DC 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6                           0x0218 0x04E0 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6                           0x0218 0x04E0 0x078C 0x1 0x1
-#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS                       0x0218 0x04E0 0x0748 0x2 0x2
-#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS                       0x0218 0x04E0 0x0000 0x2 0x0
-#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08                          0x0218 0x04E0 0x05E8 0x3 0x1
-#define MX6SLL_PAD_SD2_DATA6__SD2_WP                              0x0218 0x04E0 0x077C 0x4 0x1
-#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29                          0x0218 0x04E0 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7                           0x021C 0x04E4 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7                           0x021C 0x04E4 0x0790 0x1 0x1
-#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS                       0x021C 0x04E4 0x0000 0x2 0x0
-#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS                       0x021C 0x04E4 0x0748 0x2 0x3
-#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09                          0x021C 0x04E4 0x05EC 0x3 0x1
-#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B                            0x021C 0x04E4 0x0778 0x4 0x1
-#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00                          0x021C 0x04E4 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD3_CLK__SD3_CLK                               0x0220 0x04E8 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS                             0x0220 0x04E8 0x0588 0x1 0x0
-#define MX6SLL_PAD_SD3_CLK__KEY_COL5                              0x0220 0x04E8 0x0694 0x2 0x0
-#define MX6SLL_PAD_SD3_CLK__CSI_DATA10                            0x0220 0x04E8 0x05B0 0x3 0x0
-#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB                     0x0220 0x04E8 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18                            0x0220 0x04E8 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR                          0x0220 0x04E8 0x0000 0x6 0x0
-#define MX6SLL_PAD_SD3_CMD__SD3_CMD                               0x0224 0x04EC 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD3_CMD__AUD5_RXC                              0x0224 0x04EC 0x0584 0x1 0x0
-#define MX6SLL_PAD_SD3_CMD__KEY_ROW5                              0x0224 0x04EC 0x06B4 0x2 0x0
-#define MX6SLL_PAD_SD3_CMD__CSI_DATA11                            0x0224 0x04EC 0x05B4 0x3 0x0
-#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID                           0x0224 0x04EC 0x0560 0x4 0x1
-#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21                            0x0224 0x04EC 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR                          0x0224 0x04EC 0x0000 0x6 0x0
-#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0                           0x0228 0x04F0 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD                            0x0228 0x04F0 0x057C 0x1 0x0
-#define MX6SLL_PAD_SD3_DATA0__KEY_COL6                            0x0228 0x04F0 0x0698 0x2 0x0
-#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12                          0x0228 0x04F0 0x05B8 0x3 0x0
-#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID                         0x0228 0x04F0 0x055C 0x4 0x1
-#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19                          0x0228 0x04F0 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1                           0x022C 0x04F4 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC                            0x022C 0x04F4 0x058C 0x1 0x0
-#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6                            0x022C 0x04F4 0x06B8 0x2 0x0
-#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13                          0x022C 0x04F4 0x05BC 0x3 0x0
-#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT                         0x022C 0x04F4 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20                          0x022C 0x04F4 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B                           0x022C 0x04F4 0x0000 0x6 0x0
-#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2                           0x0230 0x04F8 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS                           0x0230 0x04F8 0x0590 0x1 0x0
-#define MX6SLL_PAD_SD3_DATA2__KEY_COL7                            0x0230 0x04F8 0x069C 0x2 0x0
-#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14                          0x0230 0x04F8 0x05C0 0x3 0x0
-#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT                           0x0230 0x04F8 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16                          0x0230 0x04F8 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC                         0x0230 0x04F8 0x0768 0x6 0x0
-#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3                           0x0234 0x04FC 0x0000 0x0 0x0
-#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD                            0x0234 0x04FC 0x0580 0x1 0x0
-#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7                            0x0234 0x04FC 0x06BC 0x2 0x0
-#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15                          0x0234 0x04FC 0x05C4 0x3 0x0
-#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT                           0x0234 0x04FC 0x0000 0x4 0x0
-#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17                          0x0234 0x04FC 0x0000 0x5 0x0
-#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC                         0x0234 0x04FC 0x076C 0x6 0x0
-#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE                         0x0238 0x0500 0x0000 0x0 0x0
-#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS                          0x0238 0x0500 0x05A0 0x2 0x0
-#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0                         0x0238 0x0500 0x065C 0x3 0x0
-#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1                       0x0238 0x0500 0x0670 0x4 0x0
-#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20                         0x0238 0x0500 0x0000 0x5 0x0
-#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE                         0x023C 0x0504 0x0000 0x0 0x0
-#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC                           0x023C 0x0504 0x059C 0x2 0x0
-#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK                        0x023C 0x0504 0x0650 0x3 0x0
-#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2                       0x023C 0x0504 0x0674 0x4 0x0
-#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21                         0x023C 0x0504 0x0000 0x5 0x0
-#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE                         0x0240 0x0508 0x0000 0x0 0x0
-#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD                           0x0240 0x0508 0x0594 0x2 0x0
-#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI                        0x0240 0x0508 0x0658 0x3 0x0
-#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1                       0x0240 0x0508 0x0000 0x4 0x0
-#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19                         0x0240 0x0508 0x0000 0x5 0x0
-#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC                           0x0244 0x050C 0x05A4 0x2 0x0
-#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO                        0x0244 0x050C 0x0654 0x3 0x0
-#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2                       0x0244 0x050C 0x0000 0x4 0x0
-#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25                         0x0244 0x050C 0x0000 0x5 0x0
-#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS                          0x0248 0x0510 0x05A8 0x2 0x0
-#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1                         0x0248 0x0510 0x0660 0x3 0x0
-#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3                       0x0248 0x0510 0x0000 0x4 0x0
-#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18                         0x0248 0x0510 0x0000 0x5 0x0
-#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD                           0x024C 0x0514 0x0598 0x2 0x0
-#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2                         0x024C 0x0514 0x0664 0x3 0x0
-#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN                          0x024C 0x0514 0x0678 0x4 0x0
-#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24                         0x024C 0x0514 0x0000 0x5 0x0
-#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT                      0x0250 0x0518 0x0000 0x2 0x0
-#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET                          0x0250 0x0518 0x0000 0x3 0x0
-#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET                          0x0250 0x0518 0x0000 0x4 0x0
-#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23                         0x0250 0x0518 0x0000 0x5 0x0
-#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID                        0x0254 0x051C 0x055C 0x2 0x2
-#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT                        0x0254 0x051C 0x0000 0x3 0x0
-#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT                        0x0254 0x051C 0x0000 0x4 0x0
-#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17                         0x0254 0x051C 0x0000 0x5 0x0
-#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN                           0x0258 0x0520 0x0738 0x2 0x0
-#define MX6SLL_PAD_GPIO4_IO22__SD1_WP                             0x0258 0x0520 0x0774 0x3 0x0
-#define MX6SLL_PAD_GPIO4_IO22__SD3_WP                             0x0258 0x0520 0x0794 0x4 0x1
-#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22                         0x0258 0x0520 0x0000 0x5 0x0
-#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT                          0x025C 0x0524 0x0000 0x2 0x0
-#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B                           0x025C 0x0524 0x0770 0x3 0x0
-#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B                           0x025C 0x0524 0x0780 0x4 0x1
-#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16                         0x025C 0x0524 0x0000 0x5 0x0
-#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B                            0x0260 0x0528 0x0000 0x2 0x0
-#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT                           0x0260 0x0528 0x0000 0x3 0x0
-#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY                     0x0260 0x0528 0x05AC 0x4 0x1
-#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26                         0x0260 0x0528 0x0000 0x5 0x0
-#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK                      0x0260 0x0528 0x073C 0x6 0x0
-
-#endif /* __DTS_IMX6SLL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
deleted file mode 100644
index 2873369a57c02..0000000000000
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ /dev/null
@@ -1,839 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2017-2018 NXP.
- *
- */
-
-#include <dt-bindings/clock/imx6sll-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "imx6sll-pinfunc.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi3 = &ecspi3;
-		spi4 = &ecspi4;
-		usb0 = &usbotg1;
-		usb1 = &usbotg2;
-		usbphy0 = &usbphy1;
-		usbphy1 = &usbphy2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			operating-points =
-				/* kHz    uV */
-				<996000  1275000>,
-				<792000  1175000>,
-				<396000  1075000>,
-				<198000	  975000>;
-			fsl,soc-operating-points =
-				/* ARM kHz      SOC-PU uV */
-				<996000         1175000>,
-				<792000         1175000>,
-				<396000         1175000>,
-				<198000		1175000>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			#cooling-cells = <2>;
-			clocks = <&clks IMX6SLL_CLK_ARM>,
-				 <&clks IMX6SLL_CLK_PLL2_PFD2>,
-				 <&clks IMX6SLL_CLK_STEP>,
-				 <&clks IMX6SLL_CLK_PLL1_SW>,
-				 <&clks IMX6SLL_CLK_PLL1_SYS>;
-			clock-names = "arm", "pll2_pfd2_396m", "step",
-				      "pll1_sw", "pll1_sys";
-			nvmem-cells = <&cpu_speed_grade>;
-			nvmem-cell-names = "speed_grade";
-		};
-	};
-
-	ckil: clock-ckil {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "ckil";
-	};
-
-	osc: clock-osc-24m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc";
-	};
-
-	ipp_di0: clock-ipp-di0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-		clock-output-names = "ipp_di0";
-	};
-
-	ipp_di1: clock-ipp-di1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-		clock-output-names = "ipp_di1";
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gpc>;
-		ranges;
-
-		ocram: sram@900000 {
-			compatible = "mmio-sram";
-			reg = <0x00900000 0x20000>;
-			ranges = <0 0x00900000 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-
-		intc: interrupt-controller@a01000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x00a01000 0x1000>,
-			      <0x00a00100 0x100>;
-			interrupt-parent = <&intc>;
-		};
-
-		L2: cache-controller@a02000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x00a02000 0x1000>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			cache-unified;
-			cache-level = <2>;
-			arm,tag-latency = <4 2 3>;
-			arm,data-latency = <4 2 3>;
-		};
-
-		aips1: bus@2000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02000000 0x100000>;
-			ranges;
-
-			spba: spba-bus@2000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x02000000 0x40000>;
-				ranges;
-
-				spdif: spdif@2004000 {
-					compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
-					reg = <0x02004000 0x4000>;
-					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
-					dma-names = "rx", "tx";
-					clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
-						 <&clks IMX6SLL_CLK_OSC>,
-						 <&clks IMX6SLL_CLK_SPDIF>,
-						 <&clks IMX6SLL_CLK_DUMMY>,
-						 <&clks IMX6SLL_CLK_DUMMY>,
-						 <&clks IMX6SLL_CLK_DUMMY>,
-						 <&clks IMX6SLL_CLK_IPG>,
-						 <&clks IMX6SLL_CLK_DUMMY>,
-						 <&clks IMX6SLL_CLK_DUMMY>,
-						 <&clks IMX6SLL_CLK_SPBA>;
-					clock-names = "core", "rxtx0",
-						      "rxtx1", "rxtx2",
-						      "rxtx3", "rxtx4",
-						      "rxtx5", "rxtx6",
-						      "rxtx7", "dma";
-					status = "disabled";
-				};
-
-				ecspi1: spi@2008000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02008000 0x4000>;
-					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
-					dma-names = "rx", "tx";
-					clocks = <&clks IMX6SLL_CLK_ECSPI1>,
-						 <&clks IMX6SLL_CLK_ECSPI1>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi2: spi@200c000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
-					reg = <0x0200c000 0x4000>;
-					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
-					dma-names = "rx", "tx";
-					clocks = <&clks IMX6SLL_CLK_ECSPI2>,
-						 <&clks IMX6SLL_CLK_ECSPI2>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi3: spi@2010000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02010000 0x4000>;
-					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
-					dma-names = "rx", "tx";
-					clocks = <&clks IMX6SLL_CLK_ECSPI3>,
-						 <&clks IMX6SLL_CLK_ECSPI3>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi4: spi@2014000 {
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02014000 0x4000>;
-					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
-					dma-names = "rx", "tx";
-					clocks = <&clks IMX6SLL_CLK_ECSPI4>,
-						 <&clks IMX6SLL_CLK_ECSPI4>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart4: serial@2018000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
-						     "fsl,imx21-uart";
-					reg = <0x02018000 0x4000>;
-					interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
-					dma-names = "rx", "tx";
-					clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
-						 <&clks IMX6SLL_CLK_UART4_SERIAL>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart1: serial@2020000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
-						     "fsl,imx21-uart";
-					reg = <0x02020000 0x4000>;
-					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
-					dma-names = "rx", "tx";
-					clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
-						 <&clks IMX6SLL_CLK_UART1_SERIAL>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart2: serial@2024000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
-						     "fsl,imx21-uart";
-					reg = <0x02024000 0x4000>;
-					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
-					dma-names = "rx", "tx";
-					clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
-						 <&clks IMX6SLL_CLK_UART2_SERIAL>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ssi1: ssi@2028000 {
-					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
-					reg = <0x02028000 0x4000>;
-					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
-						 <&clks IMX6SLL_CLK_SSI1>;
-					clock-names = "ipg", "baud";
-					status = "disabled";
-				};
-
-				ssi2: ssi@202c000 {
-					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
-					reg = <0x0202c000 0x4000>;
-					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
-						 <&clks IMX6SLL_CLK_SSI2>;
-					clock-names = "ipg", "baud";
-					status = "disabled";
-				};
-
-				ssi3: ssi@2030000 {
-					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
-					reg = <0x02030000 0x4000>;
-					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
-						 <&clks IMX6SLL_CLK_SSI3>;
-					clock-names = "ipg", "baud";
-					status = "disabled";
-				};
-
-				uart3: serial@2034000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
-						     "fsl,imx21-uart";
-					reg = <0x02034000 0x4000>;
-					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
-					dma-name = "rx", "tx";
-					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
-						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-			};
-
-			pwm1: pwm@2080000 {
-				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
-				reg = <0x02080000 0x4000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_PWM1>,
-					 <&clks IMX6SLL_CLK_PWM1>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-			};
-
-			pwm2: pwm@2084000 {
-				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
-				reg = <0x02084000 0x4000>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_PWM2>,
-					 <&clks IMX6SLL_CLK_PWM2>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-			};
-
-			pwm3: pwm@2088000 {
-				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
-				reg = <0x02088000 0x4000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_PWM3>,
-					 <&clks IMX6SLL_CLK_PWM3>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-			};
-
-			pwm4: pwm@208c000 {
-				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
-				reg = <0x0208c000 0x4000>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_PWM4>,
-					 <&clks IMX6SLL_CLK_PWM4>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-			};
-
-			gpt1: timer@2098000 {
-				compatible = "fsl,imx6sl-gpt";
-				reg = <0x02098000 0x4000>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
-					 <&clks IMX6SLL_CLK_GPT_SERIAL>;
-				clock-names = "ipg", "per";
-			};
-
-			gpio1: gpio@209c000 {
-				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
-				reg = <0x0209c000 0x4000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_GPIO1>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
-			};
-
-			gpio2: gpio@20a0000 {
-				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
-				reg = <0x020a0000 0x4000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_GPIO2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 50 32>;
-			};
-
-			gpio3: gpio@20a4000 {
-				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
-				reg = <0x020a4000 0x4000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_GPIO3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
-					      <&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
-					      <&iomuxc 21 6 11>;
-			};
-
-			gpio4: gpio@20a8000 {
-				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
-				reg = <0x020a8000 0x4000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_GPIO4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
-					      <&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
-					      <&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
-					      <&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
-					      <&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
-					      <&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
-					      <&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
-					      <&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
-					      <&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
-			};
-
-			gpio5: gpio@20ac000 {
-				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
-				reg = <0x020ac000 0x4000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_GPIO5>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
-					      <&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
-					      <&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
-					      <&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
-					      <&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
-					      <&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
-					      <&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
-					      <&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
-					      <&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
-					      <&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
-					      <&iomuxc 21 137 1>;
-			};
-
-			gpio6: gpio@20b0000 {
-				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
-				reg = <0x020b0000 0x4000>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_GPIO6>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			kpp: keypad@20b8000 {
-				compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
-				reg = <0x020b8000 0x4000>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_KPP>;
-				status = "disabled";
-			};
-
-			wdog1: watchdog@20bc000 {
-				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
-				reg = <0x020bc000 0x4000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_WDOG1>;
-			};
-
-			wdog2: watchdog@20c0000 {
-				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
-				reg = <0x020c0000 0x4000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_WDOG2>;
-				status = "disabled";
-			};
-
-			clks: clock-controller@20c4000 {
-				compatible = "fsl,imx6sll-ccm";
-				reg = <0x020c4000 0x4000>;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
-				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
-
-				assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>;
-				assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>;
-			};
-
-			anatop: anatop@20c8000 {
-				compatible = "fsl,imx6sll-anatop",
-					     "fsl,imx6q-anatop",
-					     "syscon", "simple-mfd";
-				reg = <0x020c8000 0x4000>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				reg_3p0: regulator-3p0@20c8120 {
-					compatible = "fsl,anatop-regulator";
-					reg = <0x20c8120>;
-					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2625000>;
-					regulator-max-microvolt = <3400000>;
-					anatop-reg-offset = <0x120>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2625000>;
-					anatop-max-voltage = <3400000>;
-					anatop-enable-bit = <0>;
-				};
-
-				tempmon: temperature-sensor {
-					compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
-					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-parent = <&gpc>;
-					fsl,tempmon = <&anatop>;
-					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-					nvmem-cell-names = "calib", "temp_grade";
-					clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
-				};
-			};
-
-			usbphy1: usb-phy@20c9000 {
-				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
-						"fsl,imx23-usbphy";
-				reg = <0x020c9000 0x1000>;
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_USBPHY1>;
-				phy-3p0-supply = <&reg_3p0>;
-				fsl,anatop = <&anatop>;
-			};
-
-			usbphy2: usb-phy@20ca000 {
-				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
-						"fsl,imx23-usbphy";
-				reg = <0x020ca000 0x1000>;
-				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
-				phy-reg_3p0-supply = <&reg_3p0>;
-				fsl,anatop = <&anatop>;
-			};
-
-			snvs: snvs@20cc000 {
-				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-				reg = <0x020cc000 0x4000>;
-
-				snvs_rtc: snvs-rtc-lp {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap = <&snvs>;
-					offset = <0x34>;
-					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				snvs_poweroff: snvs-poweroff {
-					compatible = "syscon-poweroff";
-					regmap = <&snvs>;
-					offset = <0x38>;
-					mask = <0x61>;
-					status = "disabled";
-				};
-
-				snvs_pwrkey: snvs-powerkey {
-					compatible = "fsl,sec-v4.0-pwrkey";
-					regmap = <&snvs>;
-					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-					linux,keycode = <KEY_POWER>;
-					wakeup-source;
-					status = "disabled";
-				};
-			};
-
-			src: reset-controller@20d8000 {
-				compatible = "fsl,imx6sll-src", "fsl,imx51-src";
-				reg = <0x020d8000 0x4000>;
-				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
-			};
-
-			gpc: interrupt-controller@20dc000 {
-				compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
-				reg = <0x020dc000 0x4000>;
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-parent = <&intc>;
-			};
-
-			iomuxc: pinctrl@20e0000 {
-				compatible = "fsl,imx6sll-iomuxc";
-				reg = <0x020e0000 0x4000>;
-			};
-
-			gpr: iomuxc-gpr@20e4000 {
-				compatible = "fsl,imx6sll-iomuxc-gpr",
-					     "fsl,imx6q-iomuxc-gpr", "syscon";
-				reg = <0x020e4000 0x4000>;
-			};
-
-			csi: csi@20e8000 {
-				compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
-				reg = <0x020e8000 0x4000>;
-				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_DUMMY>,
-					 <&clks IMX6SLL_CLK_CSI>,
-					 <&clks IMX6SLL_CLK_DUMMY>;
-				clock-names = "disp-axi", "csi_mclk", "disp_dcic";
-				status = "disabled";
-			};
-
-			sdma: dma-controller@20ec000 {
-				compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma";
-				reg = <0x020ec000 0x4000>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_IPG>,
-					 <&clks IMX6SLL_CLK_SDMA>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				iram = <&ocram>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
-			};
-
-			pxp: pxp@20f0000 {
-				compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp";
-				reg = <0x20f0000 0x4000>;
-				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_PXP>;
-				clock-names = "axi";
-			};
-
-			lcdif: lcd-controller@20f8000 {
-				compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
-				reg = <0x020f8000 0x4000>;
-				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
-					 <&clks IMX6SLL_CLK_LCDIF_APB>,
-					 <&clks IMX6SLL_CLK_DUMMY>;
-				clock-names = "pix", "axi", "disp_axi";
-				status = "disabled";
-			};
-
-			dcp: crypto@20fc000 {
-				compatible = "fsl,imx28-dcp";
-				reg = <0x020fc000 0x4000>;
-				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_DCP>;
-				clock-names = "dcp";
-			};
-		};
-
-		aips2: bus@2100000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02100000 0x100000>;
-			ranges;
-
-			usbotg1: usb@2184000 {
-				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
-						"fsl,imx27-usb";
-				reg = <0x02184000 0x200>;
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy1>;
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbotg2: usb@2184200 {
-				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
-						"fsl,imx27-usb";
-				reg = <0x02184200 0x200>;
-				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy2>;
-				fsl,usbmisc = <&usbmisc 1>;
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@2184800 {
-				#index-cells = <1>;
-				compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
-						"fsl,imx6q-usbmisc";
-				reg = <0x02184800 0x200>;
-			};
-
-			usdhc1: mmc@2190000 {
-				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
-				reg = <0x02190000 0x4000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_USDHC1>,
-					 <&clks IMX6SLL_CLK_USDHC1>,
-					 <&clks IMX6SLL_CLK_USDHC1>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				fsl,tuning-step = <2>;
-				fsl,tuning-start-tap = <20>;
-				status = "disabled";
-			};
-
-			usdhc2: mmc@2194000 {
-				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
-				reg = <0x02194000 0x4000>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_USDHC2>,
-					 <&clks IMX6SLL_CLK_USDHC2>,
-					 <&clks IMX6SLL_CLK_USDHC2>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				fsl,tuning-step = <2>;
-				fsl,tuning-start-tap = <20>;
-				status = "disabled";
-			};
-
-			usdhc3: mmc@2198000 {
-				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
-				reg = <0x02198000 0x4000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_USDHC3>,
-					 <&clks IMX6SLL_CLK_USDHC3>,
-					 <&clks IMX6SLL_CLK_USDHC3>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				fsl,tuning-step = <2>;
-				fsl,tuning-start-tap = <20>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@21a0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
-				reg = <0x021a0000 0x4000>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_I2C1>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@21a4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
-				reg = <0x021a4000 0x4000>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_I2C2>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@21a8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
-				reg = <0x021a8000 0x4000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_I2C3>;
-				status = "disabled";
-			};
-
-			mmdc: memory-controller@21b0000 {
-				compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
-				reg = <0x021b0000 0x4000>;
-				clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>;
-			};
-
-			rngb: rng@21b4000 {
-				compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb";
-				reg = <0x021b4000 0x4000>;
-				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SLL_CLK_DUMMY>;
-			};
-
-			ocotp: efuse@21bc000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,imx6sll-ocotp", "syscon";
-				reg = <0x021bc000 0x4000>;
-				clocks = <&clks IMX6SLL_CLK_OCOTP>;
-
-				cpu_speed_grade: speed-grade@10 {
-					reg = <0x10 4>;
-				};
-
-				tempmon_calib: calib@38 {
-					reg = <0x38 4>;
-				};
-
-				tempmon_temp_grade: temp-grade@20 {
-					reg = <0x20 4>;
-				};
-			};
-
-			audmux: audmux@21d8000 {
-				compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
-				reg = <0x021d8000 0x4000>;
-				status = "disabled";
-			};
-
-			uart5: serial@21f4000 {
-				compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart",
-					     "fsl,imx21-uart";
-				reg = <0x021f4000 0x4000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
-				dma-names = "rx", "tx";
-				clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
-					 <&clks IMX6SLL_CLK_UART5_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
deleted file mode 100644
index a2c79bcf9a11c..0000000000000
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ /dev/null
@@ -1,603 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright (C) 2016 Boundary Devices, Inc.
- */
-
-/dts-v1/;
-
-#include "imx6sx.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board";
-	compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		power-supply = <&reg_3p3v>;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_can1_3v3: regulator-can1-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can1-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_can2_3v3: regulator-can2-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can2-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_wlan: regulator-wlan {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_wlan>;
-		compatible = "regulator-fixed";
-		clocks = <&clks IMX6SX_CLK_CKO>;
-		clock-names = "slow";
-		regulator-name = "wlan-en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <70000>;
-		gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6sx-nitrogen6sx-sgtl5000";
-		cpu-dai = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <5>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "microchip,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0xc0000>;
-			read-only;
-		};
-
-		partition@c0000 {
-			label = "env";
-			reg = <0xc0000 0x2000>;
-			read-only;
-		};
-
-		partition@c2000 {
-			label = "Kernel";
-			reg = <0xc2000 0x11e000>;
-		};
-
-		partition@1e0000 {
-			label = "M4";
-			reg = <0x1e0000 0x20000>;
-		};
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy1>;
-	phy-supply = <&reg_3p3v>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@4 {
-			reg = <4>;
-		};
-
-		ethphy2: ethernet-phy@5 {
-			reg = <5>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy2>;
-	phy-supply = <&reg_3p3v>;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can1_3v3>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can2_3v3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6SX_CLK_CKO2>;
-		VDDA-supply = <&reg_1p8v>;
-		VDDIO-supply = <&reg_1p8v>;
-		VDDD-supply = <&reg_1p8v>;
-		assigned-clocks = <&clks IMX6SX_CLK_CKO2_SEL>,
-				  <&clks IMX6SX_CLK_CKO2>;
-		assigned-clock-parents = <&clks IMX6SX_CLK_OSC>;
-		assigned-clock-rates = <0>, <24000000>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 10 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	status = "okay";
-};
-
-&usbotg2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg2>;
-	dr_mode = "host";
-	disable-over-current;
-	reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&usdhc3 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	non-removable;
-	keep-power-in-suspend;
-	vmmc-supply = <&reg_wlan>;
-	cap-power-off-card;
-	cap-sdio-irq;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&gpio7>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc4 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
-	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&reg_1p8v>;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD	0x1b0b0
-			MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC	0x1b0b0
-			MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS	0x1b0b0
-			MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD	0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6SX_PAD_KEY_COL1__ECSPI1_MISO		0x100b1
-			MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI		0x100b1
-			MX6SX_PAD_KEY_COL0__ECSPI1_SCLK		0x100b1
-			MX6SX_PAD_KEY_ROW1__GPIO2_IO_16		0x0b0b1
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0x1b0b0
-			MX6SX_PAD_ENET1_MDC__ENET1_MDC		0x1b0b0
-			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0x30b1
-			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0x30b1
-			MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0x30b1
-			MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0x30b1
-			MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0x30b1
-			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0x30b1
-			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
-			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
-			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
-			MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
-			MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
-			MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
-			MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0xb0b0
-			MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4	0xb0b0
-			MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5	0xb0b0
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0x30b1
-			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0x30b1
-			MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0x30b1
-			MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0x30b1
-			MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0x30b1
-			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0x30b1
-			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
-			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
-			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
-			MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
-			MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
-			MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
-			MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0xb0b0
-			MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8	0xb0b0
-			MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0xb0b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b0b0
-			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b0b0
-			MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27	0x1b0b0
-			MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27	0x0b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b0b0
-			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b0b0
-			MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24	0x0b0b0
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1	0x1b0b0
-			MX6SX_PAD_NAND_CLE__GPIO4_IO_3		0x1b0b0
-			MX6SX_PAD_NAND_RE_B__GPIO4_IO_12	0x1b0b0
-			MX6SX_PAD_NAND_WE_B__GPIO4_IO_14	0x1b0b0
-			MX6SX_PAD_NAND_WP_B__GPIO4_IO_15	0x1b0b0
-			MX6SX_PAD_NAND_READY_B__GPIO4_IO_13	0x1b0b0
-			MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x1b0b0
-			MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17	0x1b0b0
-			MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18	0x1b0b0
-			MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19	0x1b0b0
-			MX6SX_PAD_SD1_CMD__CCM_CLKO1		0x000b0
-			MX6SX_PAD_SD3_DATA5__GPIO7_IO_7		0x1b0b0
-			/* Test points */
-			MX6SX_PAD_NAND_DATA04__GPIO4_IO_8	0x1b0b0
-			MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25	0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
-			MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO02__I2C2_SCL		0x4001b8b1
-			MX6SX_PAD_GPIO1_IO03__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
-			MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6SX_PAD_NAND_DATA05__GPIO4_IO_9	0xb0b0
-			MX6SX_PAD_NAND_DATA06__GPIO4_IO_10	0xb0b0
-			MX6SX_PAD_NAND_DATA07__GPIO4_IO_11	0xb0b0
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO13__PWM4_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_reg_wlan: reg-wlangrp {
-		fsl,pins = <
-			MX6SX_PAD_SD3_DATA4__GPIO7_IO_6		0x1b0b0
-			MX6SX_PAD_GPIO1_IO11__CCM_CLKO1		0x000b0
-		>;
-	};
-
-	pinctrl_sgtl5000: sgtl5000grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO12__CCM_CLKO2		0x000b0
-			MX6SX_PAD_ENET1_COL__GPIO2_IO_0		0x1b0b0
-			MX6SX_PAD_ENET1_CRS__GPIO2_IO_1		0x1b0b0
-			MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22	0xb0b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX		0x1b0b1
-			MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6SX_PAD_KEY_COL3__UART5_DCE_TX		0x1b0b1
-			MX6SX_PAD_KEY_ROW3__UART5_DCE_RX		0x1b0b1
-			MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS		0x1b0b1
-			MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC	0x1b0b0
-			MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x170b1
-		>;
-	};
-
-	pinctrl_usbotg1_vbus: usbotg1-vbusgrp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x1b0b0
-		>;
-	};
-
-	pinctrl_usbotg2: usbotg2grp {
-		fsl,pins = <
-			MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26	0xb0b0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
-			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
-			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
-			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
-			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
-			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
-			MX6SX_PAD_KEY_COL2__GPIO2_IO_12		0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10071
-			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17071
-			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17071
-			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17071
-			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17071
-			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17071
-		>;
-	};
-
-	pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp {
-		fsl,pins = <
-			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10071
-			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17071
-			MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B	0x17071
-			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17071
-			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17071
-			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17071
-			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17071
-			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x17071
-			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x17071
-			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x17071
-			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x17071
-		>;
-	};
-
-	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
-		fsl,pins = <
-			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100b9
-			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170b9
-			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170b9
-			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170b9
-			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170b9
-			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170b9
-			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170b9
-			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170b9
-			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170b9
-			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
-		fsl,pins = <
-			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100f9
-			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170f9
-			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170f9
-			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170f9
-			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170f9
-			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170f9
-			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170f9
-			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170f9
-			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170f9
-			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170f9
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h
deleted file mode 100644
index f4dc46207954c..0000000000000
--- a/arch/arm/boot/dts/imx6sx-pinfunc.h
+++ /dev/null
@@ -1,1668 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DTS_IMX6SX_PINFUNC_H
-#define __DTS_IMX6SX_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6SX_PAD_GPIO1_IO00__I2C1_SCL                            0x0014 0x035C 0x07A8 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO00__USDHC1_VSELECT                      0x0014 0x035C 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO00__SPDIF_LOCK                          0x0014 0x035C 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO00__CCM_WAIT                            0x0014 0x035C 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO00__WDOG1_WDOG_ANY                      0x0014 0x035C 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0                          0x0014 0x035C 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5               0x0014 0x035C 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO00__PHY_DTB_1                           0x0014 0x035C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO01__I2C1_SDA                            0x0018 0x0360 0x07AC 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO01__USDHC1_RESET_B                      0x0018 0x0360 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO01__SPDIF_SR_CLK                        0x0018 0x0360 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO01__CCM_STOP                            0x0018 0x0360 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO01__WDOG3_WDOG_B                        0x0018 0x0360 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO01__GPIO1_IO_1                          0x0018 0x0360 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO01__SNVS_HP_WRAPPER_VIO_5_CTL           0x0018 0x0360 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO01__PHY_DTB_0                           0x0018 0x0360 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO02__I2C2_SCL                            0x001C 0x0364 0x07B0 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO02__USDHC1_CD_B                         0x001C 0x0364 0x0864 0x1 0x1
-#define MX6SX_PAD_GPIO1_IO02__CSI2_MCLK                           0x001C 0x0364 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO02__CCM_DI0_EXT_CLK                     0x001C 0x0364 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO02__WDOG1_WDOG_B                        0x001C 0x0364 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO02__GPIO1_IO_2                          0x001C 0x0364 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO02__CCM_REF_EN_B                        0x001C 0x0364 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO02__PHY_TDI                             0x001C 0x0364 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO03__I2C2_SDA                            0x0020 0x0368 0x07B4 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO03__USDHC1_WP                           0x0020 0x0368 0x0868 0x1 0x1
-#define MX6SX_PAD_GPIO1_IO03__ENET1_REF_CLK_25M                   0x0020 0x0368 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO03__CCM_DI1_EXT_CLK                     0x0020 0x0368 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO03__WDOG2_WDOG_B                        0x0020 0x0368 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3                          0x0020 0x0368 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP                        0x0020 0x0368 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO03__PHY_TCK                             0x0020 0x0368 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX                        0x0024 0x036C 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX                        0x0024 0x036C 0x0830 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B                      0x0024 0x036C 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO04__ENET1_MDC                           0x0024 0x036C 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT                      0x0024 0x036C 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO04__ENET2_REF_CLK2                      0x0024 0x036C 0x076C 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4                          0x0024 0x036C 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP                        0x0024 0x036C 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO04__PHY_TMS                             0x0024 0x036C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX                        0x0028 0x0370 0x0830 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX                        0x0028 0x0370 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT                      0x0028 0x0370 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO                          0x0028 0x0370 0x0764 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK                   0x0028 0x0370 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO05__ENET1_REF_CLK1                      0x0028 0x0370 0x0760 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5                          0x0028 0x0370 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK                      0x0028 0x0370 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO05__PHY_TDO                             0x0028 0x0370 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX                        0x002C 0x0374 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX                        0x002C 0x0374 0x0838 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B                         0x002C 0x0374 0x086C 0x1 0x1
-#define MX6SX_PAD_GPIO1_IO06__ENET2_MDC                           0x002C 0x0374 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK                           0x002C 0x0374 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS                       0x002C 0x0374 0x082C 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART1_DTE_CTS                       0x002C 0x0374 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6                          0x002C 0x0374 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET                    0x002C 0x0374 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED     0x002C 0x0374 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX                        0x0030 0x0378 0x0838 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX                        0x0030 0x0378 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO07__USDHC2_WP                           0x0030 0x0378 0x0870 0x1 0x1
-#define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO                          0x0030 0x0378 0x0770 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK                         0x0030 0x0378 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS                       0x0030 0x0378 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART1_DTE_RTS                       0x0030 0x0378 0x082C 0x4 0x1
-#define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7                          0x0030 0x0378 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET                     0x0030 0x0378 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT                           0x0030 0x0378 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO07__VDEC_DEBUG_44                       0x0030 0x0378 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC                         0x0034 0x037C 0x0860 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B                        0x0034 0x037C 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0                    0x0034 0x037C 0x081C 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY                        0x0034 0x037C 0x069C 0x3 0x1
-#define MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS                       0x0034 0x037C 0x0834 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO08__UART2_DTE_CTS                       0x0034 0x037C 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8                          0x0034 0x037C 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET                    0x0034 0x037C 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT                           0x0034 0x037C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO08__VDEC_DEBUG_43                       0x0034 0x037C 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO09__USB_OTG1_PWR                        0x0038 0x0380 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B                        0x0038 0x0380 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                    0x0038 0x0380 0x0820 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO09__CCM_OUT0                            0x0038 0x0380 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS                       0x0038 0x0380 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO09__UART2_DTE_RTS                       0x0038 0x0380 0x0834 0x4 0x1
-#define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9                          0x0038 0x0380 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT                        0x0038 0x0380 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                   0x0038 0x0380 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO09__VDEC_DEBUG_42                       0x0038 0x0380 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID                      0x003C 0x0384 0x0624 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO10__SPDIF_EXT_CLK                       0x003C 0x0384 0x0828 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO10__PWM1_OUT                            0x003C 0x0384 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO10__CCM_OUT1                            0x003C 0x0384 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO10__CSI1_FIELD                          0x003C 0x0384 0x070C 0x4 0x1
-#define MX6SX_PAD_GPIO1_IO10__GPIO1_IO_10                         0x003C 0x0384 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO10__CSU_CSU_INT_DEB                     0x003C 0x0384 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO10__OBSERVE_MUX_OUT_3                   0x003C 0x0384 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO10__VDEC_DEBUG_41                       0x003C 0x0384 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO11__USB_OTG2_OC                         0x0040 0x0388 0x085C 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO11__SPDIF_IN                            0x0040 0x0388 0x0824 0x1 0x2
-#define MX6SX_PAD_GPIO1_IO11__PWM2_OUT                            0x0040 0x0388 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO11__CCM_CLKO1                           0x0040 0x0388 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO11__MLB_DATA                            0x0040 0x0388 0x07EC 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO11__GPIO1_IO_11                         0x0040 0x0388 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO11__CSU_CSU_ALARM_AUT_0                 0x0040 0x0388 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO11__OBSERVE_MUX_OUT_2                   0x0040 0x0388 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO11__VDEC_DEBUG_40                       0x0040 0x0388 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO12__USB_OTG2_PWR                        0x0044 0x038C 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO12__SPDIF_OUT                           0x0044 0x038C 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO12__PWM3_OUT                            0x0044 0x038C 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO12__CCM_CLKO2                           0x0044 0x038C 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO12__MLB_CLK                             0x0044 0x038C 0x07E8 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12                         0x0044 0x038C 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT_1                 0x0044 0x038C 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO12__OBSERVE_MUX_OUT_1                   0x0044 0x038C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO12__VDEC_DEBUG_39                       0x0044 0x038C 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY                      0x0048 0x0390 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO13__ANATOP_OTG2_ID                      0x0048 0x0390 0x0628 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO13__PWM4_OUT                            0x0048 0x0390 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO13__CCM_OUT2                            0x0048 0x0390 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO13__MLB_SIG                             0x0048 0x0390 0x07F0 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO13__GPIO1_IO_13                         0x0048 0x0390 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT_2                 0x0048 0x0390 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO13__OBSERVE_MUX_OUT_0                   0x0048 0x0390 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO13__VDEC_DEBUG_38                       0x0048 0x0390 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA00__CSI1_DATA_2                         0x004C 0x0394 0x06A8 0x0 0x0
-#define MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK                         0x004C 0x0394 0x078C 0x1 0x1
-#define MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC                     0x004C 0x0394 0x0684 0x2 0x1
-#define MX6SX_PAD_CSI_DATA00__I2C1_SCL                            0x004C 0x0394 0x07A8 0x3 0x0
-#define MX6SX_PAD_CSI_DATA00__UART6_RI_B                          0x004C 0x0394 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA00__GPIO1_IO_14                         0x004C 0x0394 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA00__WEIM_DATA_23                        0x004C 0x0394 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK                        0x004C 0x0394 0x0800 0x7 0x0
-#define MX6SX_PAD_CSI_DATA00__VADC_DATA_4                         0x004C 0x0394 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA00__MMDC_DEBUG_37                       0x004C 0x0394 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA01__CSI1_DATA_3                         0x0050 0x0398 0x06AC 0x0 0x0
-#define MX6SX_PAD_CSI_DATA01__ESAI_TX_FS                          0x0050 0x0398 0x077C 0x1 0x1
-#define MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS                    0x0050 0x0398 0x0688 0x2 0x1
-#define MX6SX_PAD_CSI_DATA01__I2C1_SDA                            0x0050 0x0398 0x07AC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA01__UART6_DSR_B                         0x0050 0x0398 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA01__GPIO1_IO_15                         0x0050 0x0398 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA01__WEIM_DATA_22                        0x0050 0x0398 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC                        0x0050 0x0398 0x0804 0x7 0x0
-#define MX6SX_PAD_CSI_DATA01__VADC_DATA_5                         0x0050 0x0398 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA01__MMDC_DEBUG_38                       0x0050 0x0398 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA02__CSI1_DATA_4                         0x0054 0x039C 0x06B0 0x0 0x0
-#define MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK                         0x0054 0x039C 0x0788 0x1 0x1
-#define MX6SX_PAD_CSI_DATA02__AUDMUX_AUD6_RXC                     0x0054 0x039C 0x067C 0x2 0x1
-#define MX6SX_PAD_CSI_DATA02__KPP_COL_5                           0x0054 0x039C 0x07C8 0x3 0x0
-#define MX6SX_PAD_CSI_DATA02__UART6_DTR_B                         0x0054 0x039C 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA02__GPIO1_IO_16                         0x0054 0x039C 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA02__WEIM_DATA_21                        0x0054 0x039C 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA02__SAI1_RX_BCLK                        0x0054 0x039C 0x07F4 0x7 0x0
-#define MX6SX_PAD_CSI_DATA02__VADC_DATA_6                         0x0054 0x039C 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA02__MMDC_DEBUG_39                       0x0054 0x039C 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA03__CSI1_DATA_5                         0x0058 0x03A0 0x06B4 0x0 0x0
-#define MX6SX_PAD_CSI_DATA03__ESAI_RX_FS                          0x0058 0x03A0 0x0778 0x1 0x1
-#define MX6SX_PAD_CSI_DATA03__AUDMUX_AUD6_RXFS                    0x0058 0x03A0 0x0680 0x2 0x1
-#define MX6SX_PAD_CSI_DATA03__KPP_ROW_5                           0x0058 0x03A0 0x07D4 0x3 0x0
-#define MX6SX_PAD_CSI_DATA03__UART6_DCD_B                         0x0058 0x03A0 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA03__GPIO1_IO_17                         0x0058 0x03A0 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA03__WEIM_DATA_20                        0x0058 0x03A0 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA03__SAI1_RX_SYNC                        0x0058 0x03A0 0x07FC 0x7 0x0
-#define MX6SX_PAD_CSI_DATA03__VADC_DATA_7                         0x0058 0x03A0 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA03__MMDC_DEBUG_40                       0x0058 0x03A0 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA04__CSI1_DATA_6                         0x005C 0x03A4 0x06B8 0x0 0x0
-#define MX6SX_PAD_CSI_DATA04__ESAI_TX1                            0x005C 0x03A4 0x0794 0x1 0x1
-#define MX6SX_PAD_CSI_DATA04__SPDIF_OUT                           0x005C 0x03A4 0x0000 0x2 0x0
-#define MX6SX_PAD_CSI_DATA04__KPP_COL_6                           0x005C 0x03A4 0x07CC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA04__UART6_DCE_RX                        0x005C 0x03A4 0x0858 0x4 0x0
-#define MX6SX_PAD_CSI_DATA04__UART6_DTE_TX                        0x005C 0x03A4 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18                         0x005C 0x03A4 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19                        0x005C 0x03A4 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA04__PWM5_OUT                            0x005C 0x03A4 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_DATA04__VADC_DATA_8                         0x005C 0x03A4 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA04__MMDC_DEBUG_41                       0x005C 0x03A4 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA05__CSI1_DATA_7                         0x0060 0x03A8 0x06BC 0x0 0x0
-#define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1                        0x0060 0x03A8 0x07A0 0x1 0x1
-#define MX6SX_PAD_CSI_DATA05__SPDIF_IN                            0x0060 0x03A8 0x0824 0x2 0x1
-#define MX6SX_PAD_CSI_DATA05__KPP_ROW_6                           0x0060 0x03A8 0x07D8 0x3 0x0
-#define MX6SX_PAD_CSI_DATA05__UART6_DCE_TX                        0x0060 0x03A8 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA05__UART6_DTE_RX                        0x0060 0x03A8 0x0858 0x4 0x1
-#define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19                         0x0060 0x03A8 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18                        0x0060 0x03A8 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA05__PWM6_OUT                            0x0060 0x03A8 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_DATA05__VADC_DATA_9                         0x0060 0x03A8 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA05__MMDC_DEBUG_42                       0x0060 0x03A8 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA06__CSI1_DATA_8                         0x0064 0x03AC 0x06C0 0x0 0x0
-#define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3                        0x0064 0x03AC 0x0798 0x1 0x1
-#define MX6SX_PAD_CSI_DATA06__I2C4_SCL                            0x0064 0x03AC 0x07C0 0x2 0x2
-#define MX6SX_PAD_CSI_DATA06__KPP_COL_7                           0x0064 0x03AC 0x07D0 0x3 0x0
-#define MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS                       0x0064 0x03AC 0x0854 0x4 0x0
-#define MX6SX_PAD_CSI_DATA06__UART6_DTE_CTS                       0x0064 0x03AC 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20                         0x0064 0x03AC 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17                        0x0064 0x03AC 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA06__DCIC2_OUT                           0x0064 0x03AC 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_DATA06__VADC_DATA_10                        0x0064 0x03AC 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA06__MMDC_DEBUG_43                       0x0064 0x03AC 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA07__CSI1_DATA_9                         0x0068 0x03B0 0x06C4 0x0 0x0
-#define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2                        0x0068 0x03B0 0x079C 0x1 0x1
-#define MX6SX_PAD_CSI_DATA07__I2C4_SDA                            0x0068 0x03B0 0x07C4 0x2 0x2
-#define MX6SX_PAD_CSI_DATA07__KPP_ROW_7                           0x0068 0x03B0 0x07DC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS                       0x0068 0x03B0 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA07__UART6_DTE_RTS                       0x0068 0x03B0 0x0854 0x4 0x1
-#define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21                         0x0068 0x03B0 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16                        0x0068 0x03B0 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA07__DCIC1_OUT                           0x0068 0x03B0 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_DATA07__VADC_DATA_11                        0x0068 0x03B0 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA07__MMDC_DEBUG_44                       0x0068 0x03B0 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC                           0x006C 0x03B4 0x0700 0x0 0x0
-#define MX6SX_PAD_CSI_HSYNC__ESAI_TX0                             0x006C 0x03B4 0x0790 0x1 0x1
-#define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD                      0x006C 0x03B4 0x0678 0x2 0x1
-#define MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS                        0x006C 0x03B4 0x0844 0x3 0x2
-#define MX6SX_PAD_CSI_HSYNC__UART4_DTE_CTS                        0x006C 0x03B4 0x0000 0x3 0x0
-#define MX6SX_PAD_CSI_HSYNC__MQS_LEFT                             0x006C 0x03B4 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22                          0x006C 0x03B4 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25                         0x006C 0x03B4 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0                       0x006C 0x03B4 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_HSYNC__VADC_DATA_2                          0x006C 0x03B4 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_HSYNC__MMDC_DEBUG_35                        0x006C 0x03B4 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_MCLK__CSI1_MCLK                             0x0070 0x03B8 0x0000 0x0 0x0
-#define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK                        0x0070 0x03B8 0x0784 0x1 0x1
-#define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT                        0x0070 0x03B8 0x0000 0x2 0x0
-#define MX6SX_PAD_CSI_MCLK__UART4_DCE_RX                          0x0070 0x03B8 0x0848 0x3 0x2
-#define MX6SX_PAD_CSI_MCLK__UART4_DTE_TX                          0x0070 0x03B8 0x0000 0x3 0x0
-#define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT                        0x0070 0x03B8 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23                           0x0070 0x03B8 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26                          0x0070 0x03B8 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_MCLK__CSI1_FIELD                            0x0070 0x03B8 0x070C 0x7 0x0
-#define MX6SX_PAD_CSI_MCLK__VADC_DATA_1                           0x0070 0x03B8 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_MCLK__MMDC_DEBUG_34                         0x0070 0x03B8 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK                         0x0074 0x03BC 0x0704 0x0 0x0
-#define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK                      0x0074 0x03BC 0x0780 0x1 0x1
-#define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK                         0x0074 0x03BC 0x0000 0x2 0x0
-#define MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX                        0x0074 0x03BC 0x0000 0x3 0x0
-#define MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX                        0x0074 0x03BC 0x0848 0x3 0x3
-#define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT                      0x0074 0x03BC 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24                         0x0074 0x03BC 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27                        0x0074 0x03BC 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_PIXCLK__ESAI_TX_HF_CLK                      0x0074 0x03BC 0x0784 0x7 0x2
-#define MX6SX_PAD_CSI_PIXCLK__VADC_CLK                            0x0074 0x03BC 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_PIXCLK__MMDC_DEBUG_33                       0x0074 0x03BC 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC                           0x0078 0x03C0 0x0708 0x0 0x0
-#define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0                         0x0078 0x03C0 0x07A4 0x1 0x1
-#define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                      0x0078 0x03C0 0x0674 0x2 0x1
-#define MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS                        0x0078 0x03C0 0x0000 0x3 0x0
-#define MX6SX_PAD_CSI_VSYNC__UART4_DTE_RTS                        0x0078 0x03C0 0x0844 0x3 0x3
-#define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT                            0x0078 0x03C0 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25                          0x0078 0x03C0 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24                         0x0078 0x03C0 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0                       0x0078 0x03C0 0x07F8 0x7 0x0
-#define MX6SX_PAD_CSI_VSYNC__VADC_DATA_3                          0x0078 0x03C0 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_VSYNC__MMDC_DEBUG_36                        0x0078 0x03C0 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET1_COL__ENET1_COL                            0x007C 0x03C4 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET1_COL__ENET2_MDC                            0x007C 0x03C4 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET1_COL__AUDMUX_AUD4_TXC                      0x007C 0x03C4 0x0654 0x2 0x1
-#define MX6SX_PAD_ENET1_COL__UART1_RI_B                           0x007C 0x03C4 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_COL__SPDIF_EXT_CLK                        0x007C 0x03C4 0x0828 0x4 0x1
-#define MX6SX_PAD_ENET1_COL__GPIO2_IO_0                           0x007C 0x03C4 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_COL__CSI2_DATA_23                         0x007C 0x03C4 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_COL__LCDIF2_DATA_16                       0x007C 0x03C4 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_COL__VDEC_DEBUG_37                        0x007C 0x03C4 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET1_COL__PCIE_CTRL_DEBUG_31                   0x007C 0x03C4 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET1_CRS__ENET1_CRS                            0x0080 0x03C8 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET1_CRS__ENET2_MDIO                           0x0080 0x03C8 0x0770 0x1 0x1
-#define MX6SX_PAD_ENET1_CRS__AUDMUX_AUD4_TXD                      0x0080 0x03C8 0x0648 0x2 0x1
-#define MX6SX_PAD_ENET1_CRS__UART1_DCD_B                          0x0080 0x03C8 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_CRS__SPDIF_LOCK                           0x0080 0x03C8 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_CRS__GPIO2_IO_1                           0x0080 0x03C8 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_CRS__CSI2_DATA_22                         0x0080 0x03C8 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_CRS__LCDIF2_DATA_17                       0x0080 0x03C8 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_CRS__VDEC_DEBUG_36                        0x0080 0x03C8 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET1_CRS__PCIE_CTRL_DEBUG_30                   0x0080 0x03C8 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET1_MDC__ENET1_MDC                            0x0084 0x03CC 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET1_MDC__ENET2_MDC                            0x0084 0x03CC 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET1_MDC__AUDMUX_AUD3_RXFS                     0x0084 0x03CC 0x0638 0x2 0x1
-#define MX6SX_PAD_ENET1_MDC__ANATOP_24M_OUT                       0x0084 0x03CC 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_MDC__EPIT2_OUT                            0x0084 0x03CC 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_MDC__GPIO2_IO_2                           0x0084 0x03CC 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_MDC__USB_OTG1_PWR                         0x0084 0x03CC 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_MDC__PWM7_OUT                             0x0084 0x03CC 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_MDIO__ENET1_MDIO                          0x0088 0x03D0 0x0764 0x0 0x1
-#define MX6SX_PAD_ENET1_MDIO__ENET2_MDIO                          0x0088 0x03D0 0x0770 0x1 0x2
-#define MX6SX_PAD_ENET1_MDIO__AUDMUX_MCLK                         0x0088 0x03D0 0x0000 0x2 0x0
-#define MX6SX_PAD_ENET1_MDIO__OSC32K_32K_OUT                      0x0088 0x03D0 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_MDIO__EPIT1_OUT                           0x0088 0x03D0 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_MDIO__GPIO2_IO_3                          0x0088 0x03D0 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_MDIO__USB_OTG1_OC                         0x0088 0x03D0 0x0860 0x6 0x1
-#define MX6SX_PAD_ENET1_MDIO__PWM8_OUT                            0x0088 0x03D0 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__ENET1_RX_CLK                      0x008C 0x03D4 0x0768 0x0 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__ENET1_REF_CLK_25M                 0x008C 0x03D4 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__AUDMUX_AUD4_TXFS                  0x008C 0x03D4 0x0658 0x2 0x1
-#define MX6SX_PAD_ENET1_RX_CLK__UART1_DSR_B                       0x008C 0x03D4 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__SPDIF_OUT                         0x008C 0x03D4 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4                        0x008C 0x03D4 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__CSI2_DATA_21                      0x008C 0x03D4 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__LCDIF2_DATA_18                    0x008C 0x03D4 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35                     0x008C 0x03D4 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29                0x008C 0x03D4 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK                      0x0090 0x03D8 0x0000 0x0 0x0
-/*
- * SION bit is necessary for ENET1_REF_CLK1 (ENET2_REF_CLK2 untested) if it is
- * used as clock output of IMX6SX_CLK_ENET_REF (ENET1_TX_CLK) to e.g. supply a
- * PHY in RMII mode. This configuration is valid if:
- *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK is set
- *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK unset
- * It seems to be a silicon bug that in this configuration ENET1_TX reference
- * clock isn't provided automatically.  According to i.MX6SX reference manual
- * (IOMUXC_GPR_GPR1 field descriptions: ENET1_CLK_SEL, Rev. 0 from 2/2015) it
- * should be the case.
- * So this might have unwanted side effects for other hardware units that are
- * also connected to that pin and using respective function as input (e.g.
- * UART1's DTR handling on MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B).
- */
-#define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                    0x0090 0x03D8 0x0760 0x1 0x1
-#define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD                   0x0090 0x03D8 0x0644 0x2 0x1
-#define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B                       0x0090 0x03D8 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__SPDIF_SR_CLK                      0x0090 0x03D8 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5                        0x0090 0x03D8 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__CSI2_DATA_20                      0x0090 0x03D8 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__LCDIF2_DATA_19                    0x0090 0x03D8 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__VDEC_DEBUG_34                     0x0090 0x03D8 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__PCIE_CTRL_DEBUG_28                0x0090 0x03D8 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET2_COL__ENET2_COL                            0x0094 0x03DC 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET2_COL__ENET1_MDC                            0x0094 0x03DC 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC                      0x0094 0x03DC 0x064C 0x2 0x1
-#define MX6SX_PAD_ENET2_COL__UART1_DCE_RX                         0x0094 0x03DC 0x0830 0x3 0x2
-#define MX6SX_PAD_ENET2_COL__UART1_DTE_TX                         0x0094 0x03DC 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET2_COL__SPDIF_IN                             0x0094 0x03DC 0x0824 0x4 0x3
-#define MX6SX_PAD_ENET2_COL__GPIO2_IO_6                           0x0094 0x03DC 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID                       0x0094 0x03DC 0x0624 0x6 0x1
-#define MX6SX_PAD_ENET2_COL__LCDIF2_DATA_20                       0x0094 0x03DC 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET2_COL__VDEC_DEBUG_33                        0x0094 0x03DC 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET2_COL__PCIE_CTRL_DEBUG_27                   0x0094 0x03DC 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET2_CRS__ENET2_CRS                            0x0098 0x03E0 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET2_CRS__ENET1_MDIO                           0x0098 0x03E0 0x0764 0x1 0x2
-#define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS                     0x0098 0x03E0 0x0650 0x2 0x1
-#define MX6SX_PAD_ENET2_CRS__UART1_DCE_TX                         0x0098 0x03E0 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET2_CRS__UART1_DTE_RX                         0x0098 0x03E0 0x0830 0x3 0x3
-#define MX6SX_PAD_ENET2_CRS__MLB_SIG                              0x0098 0x03E0 0x07F0 0x4 0x1
-#define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7                           0x0098 0x03E0 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID                       0x0098 0x03E0 0x0628 0x6 0x1
-#define MX6SX_PAD_ENET2_CRS__LCDIF2_DATA_21                       0x0098 0x03E0 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET2_CRS__VDEC_DEBUG_32                        0x0098 0x03E0 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET2_CRS__PCIE_CTRL_DEBUG_26                   0x0098 0x03E0 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK                      0x009C 0x03E4 0x0774 0x0 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M                 0x009C 0x03E4 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL                          0x009C 0x03E4 0x07B8 0x2 0x1
-#define MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS                     0x009C 0x03E4 0x082C 0x3 0x2
-#define MX6SX_PAD_ENET2_RX_CLK__UART1_DTE_CTS                     0x009C 0x03E4 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA                          0x009C 0x03E4 0x07EC 0x4 0x1
-#define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8                        0x009C 0x03E4 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC                       0x009C 0x03E4 0x085C 0x6 0x1
-#define MX6SX_PAD_ENET2_RX_CLK__LCDIF2_DATA_22                    0x009C 0x03E4 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__VDEC_DEBUG_31                     0x009C 0x03E4 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__PCIE_CTRL_DEBUG_25                0x009C 0x03E4 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK                      0x00A0 0x03E8 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                    0x00A0 0x03E8 0x076C 0x1 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA                          0x00A0 0x03E8 0x07BC 0x2 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS                     0x00A0 0x03E8 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__UART1_DTE_RTS                     0x00A0 0x03E8 0x082C 0x3 0x3
-#define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK                           0x00A0 0x03E8 0x07E8 0x4 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9                        0x00A0 0x03E8 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR                      0x00A0 0x03E8 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__LCDIF2_DATA_23                    0x00A0 0x03E8 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__VDEC_DEBUG_30                     0x00A0 0x03E8 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24                0x00A0 0x03E8 0x0000 0x9 0x0
-#define MX6SX_PAD_KEY_COL0__KPP_COL_0                             0x00A4 0x03EC 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL0__USDHC3_CD_B                           0x00A4 0x03EC 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL0__UART6_DCE_RTS                         0x00A4 0x03EC 0x0854 0x2 0x2
-#define MX6SX_PAD_KEY_COL0__UART6_DTE_CTS                         0x00A4 0x03EC 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK                           0x00A4 0x03EC 0x0710 0x3 0x0
-#define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC                       0x00A4 0x03EC 0x066C 0x4 0x0
-#define MX6SX_PAD_KEY_COL0__GPIO2_IO_10                           0x00A4 0x03EC 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL0__SDMA_EXT_EVENT_1                      0x00A4 0x03EC 0x0820 0x6 0x1
-#define MX6SX_PAD_KEY_COL0__SAI2_TX_BCLK                          0x00A4 0x03EC 0x0814 0x7 0x0
-#define MX6SX_PAD_KEY_COL0__VADC_DATA_0                           0x00A4 0x03EC 0x0000 0x8 0x0
-#define MX6SX_PAD_KEY_COL1__KPP_COL_1                             0x00A8 0x03F0 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B                        0x00A8 0x03F0 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL1__UART6_DCE_TX                          0x00A8 0x03F0 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_COL1__UART6_DTE_RX                          0x00A8 0x03F0 0x0858 0x2 0x2
-#define MX6SX_PAD_KEY_COL1__ECSPI1_MISO                           0x00A8 0x03F0 0x0714 0x3 0x0
-#define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS                      0x00A8 0x03F0 0x0670 0x4 0x0
-#define MX6SX_PAD_KEY_COL1__GPIO2_IO_11                           0x00A8 0x03F0 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL1__USDHC3_RESET                          0x00A8 0x03F0 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC                          0x00A8 0x03F0 0x0818 0x7 0x0
-#define MX6SX_PAD_KEY_COL2__KPP_COL_2                             0x00AC 0x03F4 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL2__USDHC4_CD_B                           0x00AC 0x03F4 0x0874 0x1 0x1
-#define MX6SX_PAD_KEY_COL2__UART5_DCE_RTS                         0x00AC 0x03F4 0x084C 0x2 0x2
-#define MX6SX_PAD_KEY_COL2__UART5_DTE_CTS                         0x00AC 0x03F4 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_COL2__CAN1_TX                               0x00AC 0x03F4 0x0000 0x3 0x0
-#define MX6SX_PAD_KEY_COL2__CANFD_TX1                             0x00AC 0x03F4 0x0000 0x4 0x0
-#define MX6SX_PAD_KEY_COL2__GPIO2_IO_12                           0x00AC 0x03F4 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL2__WEIM_DATA_30                          0x00AC 0x03F4 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_COL2__ECSPI1_RDY                            0x00AC 0x03F4 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_COL3__KPP_COL_3                             0x00B0 0x03F8 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL3__USDHC4_LCTL                           0x00B0 0x03F8 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL3__UART5_DCE_TX                          0x00B0 0x03F8 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_COL3__UART5_DTE_RX                          0x00B0 0x03F8 0x0850 0x2 0x2
-#define MX6SX_PAD_KEY_COL3__CAN2_TX                               0x00B0 0x03F8 0x0000 0x3 0x0
-#define MX6SX_PAD_KEY_COL3__CANFD_TX2                             0x00B0 0x03F8 0x0000 0x4 0x0
-#define MX6SX_PAD_KEY_COL3__GPIO2_IO_13                           0x00B0 0x03F8 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL3__WEIM_DATA_28                          0x00B0 0x03F8 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_COL3__ECSPI1_SS2                            0x00B0 0x03F8 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_COL4__KPP_COL_4                             0x00B4 0x03FC 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL4__ENET2_MDC                             0x00B4 0x03FC 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL4__I2C3_SCL                              0x00B4 0x03FC 0x07B8 0x2 0x2
-#define MX6SX_PAD_KEY_COL4__USDHC2_LCTL                           0x00B4 0x03FC 0x0000 0x3 0x0
-#define MX6SX_PAD_KEY_COL4__AUDMUX_AUD5_RXC                       0x00B4 0x03FC 0x0664 0x4 0x0
-#define MX6SX_PAD_KEY_COL4__GPIO2_IO_14                           0x00B4 0x03FC 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL4__WEIM_CRE                              0x00B4 0x03FC 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK                          0x00B4 0x03FC 0x0808 0x7 0x0
-#define MX6SX_PAD_KEY_ROW0__KPP_ROW_0                             0x00B8 0x0400 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW0__USDHC3_WP                             0x00B8 0x0400 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS                         0x00B8 0x0400 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_ROW0__UART6_DTE_RTS                         0x00B8 0x0400 0x0854 0x2 0x3
-#define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI                           0x00B8 0x0400 0x0718 0x3 0x0
-#define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                       0x00B8 0x0400 0x0660 0x4 0x0
-#define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15                           0x00B8 0x0400 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW0__SDMA_EXT_EVENT_0                      0x00B8 0x0400 0x081C 0x6 0x1
-#define MX6SX_PAD_KEY_ROW0__SAI2_TX_DATA_0                        0x00B8 0x0400 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_ROW0__GPU_IDLE                              0x00B8 0x0400 0x0000 0x8 0x0
-#define MX6SX_PAD_KEY_ROW1__KPP_ROW_1                             0x00BC 0x0404 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT                        0x00BC 0x0404 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW1__UART6_DCE_RX                          0x00BC 0x0404 0x0858 0x2 0x3
-#define MX6SX_PAD_KEY_ROW1__UART6_DTE_TX                          0x00BC 0x0404 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0                            0x00BC 0x0404 0x071C 0x3 0x0
-#define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD                       0x00BC 0x0404 0x065C 0x4 0x0
-#define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16                           0x00BC 0x0404 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW1__WEIM_DATA_31                          0x00BC 0x0404 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_ROW1__SAI2_RX_DATA_0                        0x00BC 0x0404 0x080C 0x7 0x0
-#define MX6SX_PAD_KEY_ROW1__M4_NMI                                0x00BC 0x0404 0x0000 0x8 0x0
-#define MX6SX_PAD_KEY_ROW2__KPP_ROW_2                             0x00C0 0x0408 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW2__USDHC4_WP                             0x00C0 0x0408 0x0878 0x1 0x1
-#define MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS                         0x00C0 0x0408 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_ROW2__UART5_DTE_RTS                         0x00C0 0x0408 0x084C 0x2 0x3
-#define MX6SX_PAD_KEY_ROW2__CAN1_RX                               0x00C0 0x0408 0x068C 0x3 0x1
-#define MX6SX_PAD_KEY_ROW2__CANFD_RX1                             0x00C0 0x0408 0x0694 0x4 0x1
-#define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17                           0x00C0 0x0408 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW2__WEIM_DATA_29                          0x00C0 0x0408 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3                            0x00C0 0x0408 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_ROW3__KPP_ROW_3                             0x00C4 0x040C 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL                           0x00C4 0x040C 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW3__UART5_DCE_RX                          0x00C4 0x040C 0x0850 0x2 0x3
-#define MX6SX_PAD_KEY_ROW3__UART5_DTE_TX                          0x00C4 0x040C 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_ROW3__CAN2_RX                               0x00C4 0x040C 0x0690 0x3 0x1
-#define MX6SX_PAD_KEY_ROW3__CANFD_RX2                             0x00C4 0x040C 0x0698 0x4 0x1
-#define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18                           0x00C4 0x040C 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW3__WEIM_DTACK_B                          0x00C4 0x040C 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_ROW3__ECSPI1_SS1                            0x00C4 0x040C 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_ROW4__KPP_ROW_4                             0x00C8 0x0410 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW4__ENET2_MDIO                            0x00C8 0x0410 0x0770 0x1 0x3
-#define MX6SX_PAD_KEY_ROW4__I2C3_SDA                              0x00C8 0x0410 0x07BC 0x2 0x2
-#define MX6SX_PAD_KEY_ROW4__USDHC1_LCTL                           0x00C8 0x0410 0x0000 0x3 0x0
-#define MX6SX_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS                      0x00C8 0x0410 0x0668 0x4 0x0
-#define MX6SX_PAD_KEY_ROW4__GPIO2_IO_19                           0x00C8 0x0410 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW4__WEIM_ACLK_FREERUN                     0x00C8 0x0410 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_ROW4__SAI2_RX_SYNC                          0x00C8 0x0410 0x0810 0x7 0x0
-#define MX6SX_PAD_LCD1_CLK__LCDIF1_CLK                            0x00CC 0x0414 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_CLK__LCDIF1_WR_RWN                         0x00CC 0x0414 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_CLK__AUDMUX_AUD3_RXC                       0x00CC 0x0414 0x0634 0x2 0x1
-#define MX6SX_PAD_LCD1_CLK__ENET1_1588_EVENT2_IN                  0x00CC 0x0414 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_CLK__CSI1_DATA_16                          0x00CC 0x0414 0x06DC 0x4 0x0
-#define MX6SX_PAD_LCD1_CLK__GPIO3_IO_0                            0x00CC 0x0414 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_CLK__USDHC1_WP                             0x00CC 0x0414 0x0868 0x6 0x0
-#define MX6SX_PAD_LCD1_CLK__SIM_M_HADDR_16                        0x00CC 0x0414 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_CLK__VADC_TEST_0                           0x00CC 0x0414 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_CLK__MMDC_DEBUG_0                          0x00CC 0x0414 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0                      0x00D0 0x0418 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA00__WEIM_CS1_B                         0x00D0 0x0418 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA00__M4_TRACE_0                         0x00D0 0x0418 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA00__KITTEN_TRACE_0                     0x00D0 0x0418 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA00__CSI1_DATA_20                       0x00D0 0x0418 0x06EC 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA00__GPIO3_IO_1                         0x00D0 0x0418 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA00__SRC_BT_CFG_0                       0x00D0 0x0418 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA00__SIM_M_HADDR_21                     0x00D0 0x0418 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA00__VADC_TEST_5                        0x00D0 0x0418 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA00__MMDC_DEBUG_5                       0x00D0 0x0418 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1                      0x00D4 0x041C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA01__WEIM_CS2_B                         0x00D4 0x041C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA01__M4_TRACE_1                         0x00D4 0x041C 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA01__KITTEN_TRACE_1                     0x00D4 0x041C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA01__CSI1_DATA_21                       0x00D4 0x041C 0x06F0 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA01__GPIO3_IO_2                         0x00D4 0x041C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA01__SRC_BT_CFG_1                       0x00D4 0x041C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA01__SIM_M_HADDR_22                     0x00D4 0x041C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA01__VADC_TEST_6                        0x00D4 0x041C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA01__MMDC_DEBUG_6                       0x00D4 0x041C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2                      0x00D8 0x0420 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA02__WEIM_CS3_B                         0x00D8 0x0420 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA02__M4_TRACE_2                         0x00D8 0x0420 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA02__KITTEN_TRACE_2                     0x00D8 0x0420 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA02__CSI1_DATA_22                       0x00D8 0x0420 0x06F4 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA02__GPIO3_IO_3                         0x00D8 0x0420 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA02__SRC_BT_CFG_2                       0x00D8 0x0420 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA02__SIM_M_HADDR_23                     0x00D8 0x0420 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA02__VADC_TEST_7                        0x00D8 0x0420 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA02__MMDC_DEBUG_7                       0x00D8 0x0420 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3                      0x00DC 0x0424 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA03__WEIM_ADDR_24                       0x00DC 0x0424 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA03__M4_TRACE_3                         0x00DC 0x0424 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA03__KITTEN_TRACE_3                     0x00DC 0x0424 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA03__CSI1_DATA_23                       0x00DC 0x0424 0x06F8 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA03__GPIO3_IO_4                         0x00DC 0x0424 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA03__SRC_BT_CFG_3                       0x00DC 0x0424 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA03__SIM_M_HADDR_24                     0x00DC 0x0424 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA03__VADC_TEST_8                        0x00DC 0x0424 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA03__MMDC_DEBUG_8                       0x00DC 0x0424 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4                      0x00E0 0x0428 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA04__WEIM_ADDR_25                       0x00E0 0x0428 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA04__KITTEN_TRACE_4                     0x00E0 0x0428 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC                         0x00E0 0x0428 0x0708 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA04__GPIO3_IO_5                         0x00E0 0x0428 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA04__SRC_BT_CFG_4                       0x00E0 0x0428 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA04__SIM_M_HADDR_25                     0x00E0 0x0428 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA04__VADC_TEST_9                        0x00E0 0x0428 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA04__MMDC_DEBUG_9                       0x00E0 0x0428 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5                      0x00E4 0x042C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA05__WEIM_ADDR_26                       0x00E4 0x042C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA05__KITTEN_TRACE_5                     0x00E4 0x042C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC                         0x00E4 0x042C 0x0700 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA05__GPIO3_IO_6                         0x00E4 0x042C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA05__SRC_BT_CFG_5                       0x00E4 0x042C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA05__SIM_M_HADDR_26                     0x00E4 0x042C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA05__VADC_TEST_10                       0x00E4 0x042C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA05__MMDC_DEBUG_10                      0x00E4 0x042C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6                      0x00E8 0x0430 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA06__WEIM_EB_B_2                        0x00E8 0x0430 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA06__KITTEN_TRACE_6                     0x00E8 0x0430 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK                        0x00E8 0x0430 0x0704 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA06__GPIO3_IO_7                         0x00E8 0x0430 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA06__SRC_BT_CFG_6                       0x00E8 0x0430 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA06__SIM_M_HADDR_27                     0x00E8 0x0430 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA06__VADC_TEST_11                       0x00E8 0x0430 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA06__MMDC_DEBUG_11                      0x00E8 0x0430 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7                      0x00EC 0x0434 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA07__WEIM_EB_B_3                        0x00EC 0x0434 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA07__KITTEN_TRACE_7                     0x00EC 0x0434 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA07__CSI1_MCLK                          0x00EC 0x0434 0x0000 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA07__GPIO3_IO_8                         0x00EC 0x0434 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA07__SRC_BT_CFG_7                       0x00EC 0x0434 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA07__SIM_M_HADDR_28                     0x00EC 0x0434 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA07__VADC_TEST_12                       0x00EC 0x0434 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA07__MMDC_DEBUG_12                      0x00EC 0x0434 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8                      0x00F0 0x0438 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA08__WEIM_AD_8                          0x00F0 0x0438 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA08__KITTEN_TRACE_8                     0x00F0 0x0438 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9                        0x00F0 0x0438 0x06C4 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA08__GPIO3_IO_9                         0x00F0 0x0438 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA08__SRC_BT_CFG_8                       0x00F0 0x0438 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA08__SIM_M_HADDR_29                     0x00F0 0x0438 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA08__VADC_TEST_13                       0x00F0 0x0438 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA08__MMDC_DEBUG_13                      0x00F0 0x0438 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9                      0x00F4 0x043C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA09__WEIM_AD_9                          0x00F4 0x043C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA09__KITTEN_TRACE_9                     0x00F4 0x043C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8                        0x00F4 0x043C 0x06C0 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA09__GPIO3_IO_10                        0x00F4 0x043C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA09__SRC_BT_CFG_9                       0x00F4 0x043C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA09__SIM_M_HADDR_30                     0x00F4 0x043C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA09__VADC_TEST_14                       0x00F4 0x043C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA09__MMDC_DEBUG_14                      0x00F4 0x043C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10                     0x00F8 0x0440 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA10__WEIM_AD_10                         0x00F8 0x0440 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA10__KITTEN_TRACE_10                    0x00F8 0x0440 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7                        0x00F8 0x0440 0x06BC 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA10__GPIO3_IO_11                        0x00F8 0x0440 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA10__SRC_BT_CFG_10                      0x00F8 0x0440 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA10__SIM_M_HADDR_31                     0x00F8 0x0440 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA10__VADC_TEST_15                       0x00F8 0x0440 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA10__MMDC_DEBUG_15                      0x00F8 0x0440 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11                     0x00FC 0x0444 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA11__WEIM_AD_11                         0x00FC 0x0444 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA11__KITTEN_TRACE_11                    0x00FC 0x0444 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6                        0x00FC 0x0444 0x06B8 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA11__GPIO3_IO_12                        0x00FC 0x0444 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA11__SRC_BT_CFG_11                      0x00FC 0x0444 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA11__SIM_M_HBURST_0                     0x00FC 0x0444 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA11__VADC_TEST_16                       0x00FC 0x0444 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA11__MMDC_DEBUG_16                      0x00FC 0x0444 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12                     0x0100 0x0448 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA12__WEIM_AD_12                         0x0100 0x0448 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA12__KITTEN_TRACE_12                    0x0100 0x0448 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5                        0x0100 0x0448 0x06B4 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA12__GPIO3_IO_13                        0x0100 0x0448 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA12__SRC_BT_CFG_12                      0x0100 0x0448 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA12__SIM_M_HBURST_1                     0x0100 0x0448 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA12__VADC_TEST_17                       0x0100 0x0448 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA12__MMDC_DEBUG_17                      0x0100 0x0448 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13                     0x0104 0x044C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA13__WEIM_AD_13                         0x0104 0x044C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA13__KITTEN_TRACE_13                    0x0104 0x044C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4                        0x0104 0x044C 0x06B0 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA13__GPIO3_IO_14                        0x0104 0x044C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA13__SRC_BT_CFG_13                      0x0104 0x044C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA13__SIM_M_HBURST_2                     0x0104 0x044C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA13__VADC_TEST_18                       0x0104 0x044C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA13__MMDC_DEBUG_18                      0x0104 0x044C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14                     0x0108 0x0450 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA14__WEIM_AD_14                         0x0108 0x0450 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA14__KITTEN_TRACE_14                    0x0108 0x0450 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3                        0x0108 0x0450 0x06AC 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA14__GPIO3_IO_15                        0x0108 0x0450 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA14__SRC_BT_CFG_14                      0x0108 0x0450 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA14__SIM_M_HMASTLOCK                    0x0108 0x0450 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA14__VADC_TEST_19                       0x0108 0x0450 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA14__MMDC_DEBUG_19                      0x0108 0x0450 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15                     0x010C 0x0454 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA15__WEIM_AD_15                         0x010C 0x0454 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA15__KITTEN_TRACE_15                    0x010C 0x0454 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2                        0x010C 0x0454 0x06A8 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA15__GPIO3_IO_16                        0x010C 0x0454 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA15__SRC_BT_CFG_15                      0x010C 0x0454 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA15__SIM_M_HPROT_0                      0x010C 0x0454 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA15__VDEC_DEBUG_0                       0x010C 0x0454 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA15__MMDC_DEBUG_20                      0x010C 0x0454 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16                     0x0110 0x0458 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA16__WEIM_ADDR_16                       0x0110 0x0458 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA16__M4_TRACE_CLK                       0x0110 0x0458 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA16__KITTEN_TRACE_CLK                   0x0110 0x0458 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1                        0x0110 0x0458 0x06A4 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA16__GPIO3_IO_17                        0x0110 0x0458 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA16__SRC_BT_CFG_24                      0x0110 0x0458 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA16__SIM_M_HPROT_1                      0x0110 0x0458 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA16__VDEC_DEBUG_1                       0x0110 0x0458 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA16__MMDC_DEBUG_21                      0x0110 0x0458 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17                     0x0114 0x045C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA17__WEIM_ADDR_17                       0x0114 0x045C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA17__KITTEN_TRACE_CTL                   0x0114 0x045C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0                        0x0114 0x045C 0x06A0 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA17__GPIO3_IO_18                        0x0114 0x045C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA17__SRC_BT_CFG_25                      0x0114 0x045C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA17__SIM_M_HPROT_2                      0x0114 0x045C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA17__VDEC_DEBUG_2                       0x0114 0x045C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA17__MMDC_DEBUG_22                      0x0114 0x045C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18                     0x0118 0x0460 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA18__WEIM_ADDR_18                       0x0118 0x0460 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA18__M4_EVENTO                          0x0118 0x0460 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA18__KITTEN_EVENTO                      0x0118 0x0460 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA18__CSI1_DATA_15                       0x0118 0x0460 0x06D8 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA18__GPIO3_IO_19                        0x0118 0x0460 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA18__SRC_BT_CFG_26                      0x0118 0x0460 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA18__SIM_M_HPROT_3                      0x0118 0x0460 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA18__VDEC_DEBUG_3                       0x0118 0x0460 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA18__MMDC_DEBUG_23                      0x0118 0x0460 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19                     0x011C 0x0464 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA19__WEIM_ADDR_19                       0x011C 0x0464 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA19__M4_TRACE_SWO                       0x011C 0x0464 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA19__CSI1_DATA_14                       0x011C 0x0464 0x06D4 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA19__GPIO3_IO_20                        0x011C 0x0464 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA19__SRC_BT_CFG_27                      0x011C 0x0464 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA19__SIM_M_HREADYOUT                    0x011C 0x0464 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA19__VDEC_DEBUG_4                       0x011C 0x0464 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA19__MMDC_DEBUG_24                      0x011C 0x0464 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20                     0x0120 0x0468 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA20__WEIM_ADDR_20                       0x0120 0x0468 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA20__PWM8_OUT                           0x0120 0x0468 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA20__ENET1_1588_EVENT2_OUT              0x0120 0x0468 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA20__CSI1_DATA_13                       0x0120 0x0468 0x06D0 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA20__GPIO3_IO_21                        0x0120 0x0468 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA20__SRC_BT_CFG_28                      0x0120 0x0468 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA20__SIM_M_HRESP                        0x0120 0x0468 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA20__VDEC_DEBUG_5                       0x0120 0x0468 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA20__MMDC_DEBUG_25                      0x0120 0x0468 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21                     0x0124 0x046C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA21__WEIM_ADDR_21                       0x0124 0x046C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA21__PWM7_OUT                           0x0124 0x046C 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA21__ENET1_1588_EVENT3_OUT              0x0124 0x046C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA21__CSI1_DATA_12                       0x0124 0x046C 0x06CC 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA21__GPIO3_IO_22                        0x0124 0x046C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA21__SRC_BT_CFG_29                      0x0124 0x046C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA21__SIM_M_HSIZE_0                      0x0124 0x046C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA21__VDEC_DEBUG_6                       0x0124 0x046C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA21__MMDC_DEBUG_26                      0x0124 0x046C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22                     0x0128 0x0470 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA22__WEIM_ADDR_22                       0x0128 0x0470 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA22__PWM6_OUT                           0x0128 0x0470 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA22__ENET2_1588_EVENT2_OUT              0x0128 0x0470 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA22__CSI1_DATA_11                       0x0128 0x0470 0x06C8 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA22__GPIO3_IO_23                        0x0128 0x0470 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA22__SRC_BT_CFG_30                      0x0128 0x0470 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA22__SIM_M_HSIZE_1                      0x0128 0x0470 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA22__VDEC_DEBUG_7                       0x0128 0x0470 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA22__MMDC_DEBUG_27                      0x0128 0x0470 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23                     0x012C 0x0474 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA23__WEIM_ADDR_23                       0x012C 0x0474 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA23__PWM5_OUT                           0x012C 0x0474 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA23__ENET2_1588_EVENT3_OUT              0x012C 0x0474 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA23__CSI1_DATA_10                       0x012C 0x0474 0x06FC 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA23__GPIO3_IO_24                        0x012C 0x0474 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA23__SRC_BT_CFG_31                      0x012C 0x0474 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA23__SIM_M_HSIZE_2                      0x012C 0x0474 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA23__VDEC_DEBUG_8                       0x012C 0x0474 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA23__MMDC_DEBUG_28                      0x012C 0x0474 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE                      0x0130 0x0478 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_RD_E                        0x0130 0x0478 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_ENABLE__AUDMUX_AUD3_TXC                    0x0130 0x0478 0x063C 0x2 0x1
-#define MX6SX_PAD_LCD1_ENABLE__ENET1_1588_EVENT3_IN               0x0130 0x0478 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_ENABLE__CSI1_DATA_17                       0x0130 0x0478 0x06E0 0x4 0x0
-#define MX6SX_PAD_LCD1_ENABLE__GPIO3_IO_25                        0x0130 0x0478 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_ENABLE__USDHC1_CD_B                        0x0130 0x0478 0x0864 0x6 0x0
-#define MX6SX_PAD_LCD1_ENABLE__SIM_M_HADDR_17                     0x0130 0x0478 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_ENABLE__VADC_TEST_1                        0x0130 0x0478 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_ENABLE__MMDC_DEBUG_1                       0x0130 0x0478 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC                        0x0134 0x047C 0x07E0 0x0 0x0
-#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_RS                           0x0134 0x047C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_HSYNC__AUDMUX_AUD3_TXD                     0x0134 0x047C 0x0630 0x2 0x1
-#define MX6SX_PAD_LCD1_HSYNC__ENET2_1588_EVENT2_IN                0x0134 0x047C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_HSYNC__CSI1_DATA_18                        0x0134 0x047C 0x06E4 0x4 0x0
-#define MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26                         0x0134 0x047C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_HSYNC__USDHC2_WP                           0x0134 0x047C 0x0870 0x6 0x0
-#define MX6SX_PAD_LCD1_HSYNC__SIM_M_HADDR_18                      0x0134 0x047C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_HSYNC__VADC_TEST_2                         0x0134 0x047C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_HSYNC__MMDC_DEBUG_2                        0x0134 0x047C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_RESET__LCDIF1_RESET                        0x0138 0x0480 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_RESET__LCDIF1_CS                           0x0138 0x0480 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_RESET__AUDMUX_AUD3_RXD                     0x0138 0x0480 0x062C 0x2 0x1
-#define MX6SX_PAD_LCD1_RESET__KITTEN_EVENTI                       0x0138 0x0480 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_RESET__M4_EVENTI                           0x0138 0x0480 0x0000 0x4 0x0
-#define MX6SX_PAD_LCD1_RESET__GPIO3_IO_27                         0x0138 0x0480 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_RESET__CCM_PMIC_RDY                        0x0138 0x0480 0x069C 0x6 0x0
-#define MX6SX_PAD_LCD1_RESET__SIM_M_HADDR_20                      0x0138 0x0480 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_RESET__VADC_TEST_4                         0x0138 0x0480 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_RESET__MMDC_DEBUG_4                        0x0138 0x0480 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC                        0x013C 0x0484 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_BUSY                         0x013C 0x0484 0x07E0 0x1 0x1
-#define MX6SX_PAD_LCD1_VSYNC__AUDMUX_AUD3_TXFS                    0x013C 0x0484 0x0640 0x2 0x1
-#define MX6SX_PAD_LCD1_VSYNC__ENET2_1588_EVENT3_IN                0x013C 0x0484 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_VSYNC__CSI1_DATA_19                        0x013C 0x0484 0x06E8 0x4 0x0
-#define MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28                         0x013C 0x0484 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_VSYNC__USDHC2_CD_B                         0x013C 0x0484 0x086C 0x6 0x0
-#define MX6SX_PAD_LCD1_VSYNC__SIM_M_HADDR_19                      0x013C 0x0484 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_VSYNC__VADC_TEST_3                         0x013C 0x0484 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_VSYNC__MMDC_DEBUG_3                        0x013C 0x0484 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_ALE__RAWNAND_ALE                           0x0140 0x0488 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_ALE__I2C3_SDA                              0x0140 0x0488 0x07BC 0x1 0x0
-#define MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B                         0x0140 0x0488 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_ALE__ECSPI2_SS0                            0x0140 0x0488 0x072C 0x3 0x0
-#define MX6SX_PAD_NAND_ALE__ESAI_TX3_RX2                          0x0140 0x0488 0x079C 0x4 0x0
-#define MX6SX_PAD_NAND_ALE__GPIO4_IO_0                            0x0140 0x0488 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_ALE__WEIM_CS0_B                            0x0140 0x0488 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_ALE__TPSMP_HDATA_0                         0x0140 0x0488 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_ALE__ANATOP_USBPHY1_TSTI_TX_EN             0x0140 0x0488 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_ALE__SDMA_DEBUG_PC_12                      0x0140 0x0488 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_CE0_B__RAWNAND_CE0_B                       0x0144 0x048C 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_CE0_B__USDHC2_VSELECT                      0x0144 0x048C 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2                      0x0144 0x048C 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_CE0_B__AUDMUX_AUD4_TXC                     0x0144 0x048C 0x0654 0x3 0x0
-#define MX6SX_PAD_NAND_CE0_B__ESAI_TX_CLK                         0x0144 0x048C 0x078C 0x4 0x0
-#define MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1                          0x0144 0x048C 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_CE0_B__WEIM_LBA_B                          0x0144 0x048C 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_CE0_B__TPSMP_HDATA_3                       0x0144 0x048C 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_CE0_B__ANATOP_USBPHY1_TSTI_TX_HIZ          0x0144 0x048C 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_CE0_B__SDMA_DEBUG_PC_9                     0x0144 0x048C 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_CE1_B__RAWNAND_CE1_B                       0x0148 0x0490 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_CE1_B__USDHC3_RESET_B                      0x0148 0x0490 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3                      0x0148 0x0490 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_CE1_B__AUDMUX_AUD4_TXD                     0x0148 0x0490 0x0648 0x3 0x0
-#define MX6SX_PAD_NAND_CE1_B__ESAI_TX0                            0x0148 0x0490 0x0790 0x4 0x0
-#define MX6SX_PAD_NAND_CE1_B__GPIO4_IO_2                          0x0148 0x0490 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_CE1_B__WEIM_OE                             0x0148 0x0490 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_CE1_B__TPSMP_HDATA_4                       0x0148 0x0490 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_CE1_B__ANATOP_USBPHY1_TSTI_TX_LS_MODE      0x0148 0x0490 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8                     0x0148 0x0490 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_CLE__RAWNAND_CLE                           0x014C 0x0494 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_CLE__I2C3_SCL                              0x014C 0x0494 0x07B8 0x1 0x0
-#define MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK                          0x014C 0x0494 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_CLE__ECSPI2_SCLK                           0x014C 0x0494 0x0720 0x3 0x0
-#define MX6SX_PAD_NAND_CLE__ESAI_TX2_RX3                          0x014C 0x0494 0x0798 0x4 0x0
-#define MX6SX_PAD_NAND_CLE__GPIO4_IO_3                            0x014C 0x0494 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_CLE__WEIM_BCLK                             0x014C 0x0494 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_CLE__TPSMP_CLK                             0x014C 0x0494 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_CLE__ANATOP_USBPHY1_TSTI_TX_DP             0x014C 0x0494 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_CLE__SDMA_DEBUG_PC_13                      0x014C 0x0494 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA00__RAWNAND_DATA00                     0x0150 0x0498 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA00__USDHC1_DATA4                       0x0150 0x0498 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1                     0x0150 0x0498 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA00__ECSPI5_MISO                        0x0150 0x0498 0x0754 0x3 0x0
-#define MX6SX_PAD_NAND_DATA00__ESAI_RX_CLK                        0x0150 0x0498 0x0788 0x4 0x0
-#define MX6SX_PAD_NAND_DATA00__GPIO4_IO_4                         0x0150 0x0498 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA00__WEIM_AD_0                          0x0150 0x0498 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA00__TPSMP_HDATA_7                      0x0150 0x0498 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA00__ANATOP_USBPHY1_TSTO_RX_DISCON_DET  0x0150 0x0498 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA00__SDMA_DEBUG_EVT_CHN_LINES_5         0x0150 0x0498 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA01__RAWNAND_DATA01                     0x0154 0x049C 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA01__USDHC1_DATA5                       0x0154 0x049C 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0                     0x0154 0x049C 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA01__ECSPI5_MOSI                        0x0154 0x049C 0x0758 0x3 0x0
-#define MX6SX_PAD_NAND_DATA01__ESAI_RX_FS                         0x0154 0x049C 0x0778 0x4 0x0
-#define MX6SX_PAD_NAND_DATA01__GPIO4_IO_5                         0x0154 0x049C 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA01__WEIM_AD_1                          0x0154 0x049C 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA01__TPSMP_HDATA_8                      0x0154 0x049C 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA01__ANATOP_USBPHY1_TSTO_RX_HS_RXD      0x0154 0x049C 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA01__SDMA_DEBUG_EVT_CHN_LINES_4         0x0154 0x049C 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA02__RAWNAND_DATA02                     0x0158 0x04A0 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA02__USDHC1_DATA6                       0x0158 0x04A0 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK                       0x0158 0x04A0 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA02__ECSPI5_SCLK                        0x0158 0x04A0 0x0750 0x3 0x0
-#define MX6SX_PAD_NAND_DATA02__ESAI_TX_HF_CLK                     0x0158 0x04A0 0x0784 0x4 0x0
-#define MX6SX_PAD_NAND_DATA02__GPIO4_IO_6                         0x0158 0x04A0 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA02__WEIM_AD_2                          0x0158 0x04A0 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA02__TPSMP_HDATA_9                      0x0158 0x04A0 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA02__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV   0x0158 0x04A0 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA02__SDMA_DEBUG_EVT_CHN_LINES_3         0x0158 0x04A0 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA03__RAWNAND_DATA03                     0x015C 0x04A4 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA03__USDHC1_DATA7                       0x015C 0x04A4 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B                      0x015C 0x04A4 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA03__ECSPI5_SS0                         0x015C 0x04A4 0x075C 0x3 0x0
-#define MX6SX_PAD_NAND_DATA03__ESAI_RX_HF_CLK                     0x015C 0x04A4 0x0780 0x4 0x0
-#define MX6SX_PAD_NAND_DATA03__GPIO4_IO_7                         0x015C 0x04A4 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA03__WEIM_AD_3                          0x015C 0x04A4 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA03__TPSMP_HDATA_10                     0x015C 0x04A4 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA03__ANATOP_USBPHY1_TSTO_RX_SQUELCH     0x015C 0x04A4 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA03__SDMA_DEBUG_EVT_CHN_LINES_6         0x015C 0x04A4 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04                     0x0160 0x04A8 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4                       0x0160 0x04A8 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B                      0x0160 0x04A8 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS                      0x0160 0x04A8 0x083C 0x3 0x0
-#define MX6SX_PAD_NAND_DATA04__UART3_DTE_CTS                      0x0160 0x04A8 0x0000 0x3 0x0
-#define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS                   0x0160 0x04A8 0x0650 0x4 0x0
-#define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8                         0x0160 0x04A8 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA04__WEIM_AD_4                          0x0160 0x04A8 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA04__TPSMP_HDATA_11                     0x0160 0x04A8 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA04__ANATOP_USBPHY2_TSTO_RX_SQUELCH     0x0160 0x04A8 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA04__SDMA_DEBUG_CORE_STATE_0            0x0160 0x04A8 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05                     0x0164 0x04AC 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5                       0x0164 0x04AC 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS                        0x0164 0x04AC 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS                      0x0164 0x04AC 0x0000 0x3 0x0
-#define MX6SX_PAD_NAND_DATA05__UART3_DTE_RTS                      0x0164 0x04AC 0x083C 0x3 0x1
-#define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                    0x0164 0x04AC 0x064C 0x4 0x0
-#define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9                         0x0164 0x04AC 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA05__WEIM_AD_5                          0x0164 0x04AC 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA05__TPSMP_HDATA_12                     0x0164 0x04AC 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA05__ANATOP_USBPHY2_TSTO_RX_DISCON_DET  0x0164 0x04AC 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA05__SDMA_DEBUG_CORE_STATE_1            0x0164 0x04AC 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06                     0x0168 0x04B0 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6                       0x0168 0x04B0 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B                      0x0168 0x04B0 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA06__UART3_DCE_RX                       0x0168 0x04B0 0x0840 0x3 0x0
-#define MX6SX_PAD_NAND_DATA06__UART3_DTE_TX                       0x0168 0x04B0 0x0000 0x3 0x0
-#define MX6SX_PAD_NAND_DATA06__PWM3_OUT                           0x0168 0x04B0 0x0000 0x4 0x0
-#define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10                        0x0168 0x04B0 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA06__WEIM_AD_6                          0x0168 0x04B0 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA06__TPSMP_HDATA_13                     0x0168 0x04B0 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA06__ANATOP_USBPHY2_TSTO_RX_FS_RXD      0x0168 0x04B0 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA06__SDMA_DEBUG_CORE_STATE_2            0x0168 0x04B0 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07                     0x016C 0x04B4 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7                       0x016C 0x04B4 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS                        0x016C 0x04B4 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA07__UART3_DCE_TX                       0x016C 0x04B4 0x0000 0x3 0x0
-#define MX6SX_PAD_NAND_DATA07__UART3_DTE_RX                       0x016C 0x04B4 0x0840 0x3 0x1
-#define MX6SX_PAD_NAND_DATA07__PWM4_OUT                           0x016C 0x04B4 0x0000 0x4 0x0
-#define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11                        0x016C 0x04B4 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA07__WEIM_AD_7                          0x016C 0x04B4 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA07__TPSMP_HDATA_14                     0x016C 0x04B4 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA07__ANATOP_USBPHY1_TSTO_RX_FS_RXD      0x016C 0x04B4 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA07__SDMA_DEBUG_CORE_STATE_3            0x016C 0x04B4 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_RE_B__RAWNAND_RE_B                         0x0170 0x04B8 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_RE_B__USDHC2_RESET_B                       0x0170 0x04B8 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3                       0x0170 0x04B8 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_RE_B__AUDMUX_AUD4_TXFS                     0x0170 0x04B8 0x0658 0x3 0x0
-#define MX6SX_PAD_NAND_RE_B__ESAI_TX_FS                           0x0170 0x04B8 0x077C 0x4 0x0
-#define MX6SX_PAD_NAND_RE_B__GPIO4_IO_12                          0x0170 0x04B8 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_RE_B__WEIM_RW                              0x0170 0x04B8 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_RE_B__TPSMP_HDATA_5                        0x0170 0x04B8 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_RE_B__ANATOP_USBPHY2_TSTO_RX_HS_RXD        0x0170 0x04B8 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_RE_B__SDMA_DEBUG_PC_7                      0x0170 0x04B8 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_READY_B__RAWNAND_READY_B                   0x0174 0x04BC 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_READY_B__USDHC1_VSELECT                    0x0174 0x04BC 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1                    0x0174 0x04BC 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_READY_B__ECSPI2_MISO                       0x0174 0x04BC 0x0724 0x3 0x0
-#define MX6SX_PAD_NAND_READY_B__ESAI_TX1                          0x0174 0x04BC 0x0794 0x4 0x0
-#define MX6SX_PAD_NAND_READY_B__GPIO4_IO_13                       0x0174 0x04BC 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_READY_B__WEIM_EB_B_1                       0x0174 0x04BC 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_READY_B__TPSMP_HDATA_2                     0x0174 0x04BC 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_READY_B__ANATOP_USBPHY1_TSTI_TX_DN         0x0174 0x04BC 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_READY_B__SDMA_DEBUG_PC_10                  0x0174 0x04BC 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_WE_B__RAWNAND_WE_B                         0x0178 0x04C0 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_WE_B__USDHC4_VSELECT                       0x0178 0x04C0 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2                       0x0178 0x04C0 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_WE_B__AUDMUX_AUD4_RXD                      0x0178 0x04C0 0x0644 0x3 0x0
-#define MX6SX_PAD_NAND_WE_B__ESAI_TX5_RX0                         0x0178 0x04C0 0x07A4 0x4 0x0
-#define MX6SX_PAD_NAND_WE_B__GPIO4_IO_14                          0x0178 0x04C0 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_WE_B__WEIM_WAIT                            0x0178 0x04C0 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_WE_B__TPSMP_HDATA_6                        0x0178 0x04C0 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_WE_B__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV     0x0178 0x04C0 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_WE_B__SDMA_DEBUG_PC_6                      0x0178 0x04C0 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_WP_B__RAWNAND_WP_B                         0x017C 0x04C4 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_WP_B__USDHC1_RESET_B                       0x017C 0x04C4 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0                       0x017C 0x04C4 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_WP_B__ECSPI2_MOSI                          0x017C 0x04C4 0x0728 0x3 0x0
-#define MX6SX_PAD_NAND_WP_B__ESAI_TX4_RX1                         0x017C 0x04C4 0x07A0 0x4 0x0
-#define MX6SX_PAD_NAND_WP_B__GPIO4_IO_15                          0x017C 0x04C4 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_WP_B__WEIM_EB_B_0                          0x017C 0x04C4 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_WP_B__TPSMP_HDATA_1                        0x017C 0x04C4 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_WP_B__ANATOP_USBPHY1_TSTI_TX_HS_MODE       0x017C 0x04C4 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_WP_B__SDMA_DEBUG_PC_11                     0x017C 0x04C4 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0                    0x0180 0x04C8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC                       0x0180 0x04C8 0x085C 0x1 0x2
-#define MX6SX_PAD_QSPI1A_DATA0__ECSPI1_MOSI                       0x0180 0x04C8 0x0718 0x2 0x1
-#define MX6SX_PAD_QSPI1A_DATA0__ESAI_TX4_RX1                      0x0180 0x04C8 0x07A0 0x3 0x2
-#define MX6SX_PAD_QSPI1A_DATA0__CSI1_DATA_14                      0x0180 0x04C8 0x06D4 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16                       0x0180 0x04C8 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__WEIM_DATA_6                       0x0180 0x04C8 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__SIM_M_HADDR_3                     0x0180 0x04C8 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__SDMA_DEBUG_BUS_DEVICE_3           0x0180 0x04C8 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1                    0x0184 0x04CC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__ANATOP_OTG1_ID                    0x0184 0x04CC 0x0624 0x1 0x2
-#define MX6SX_PAD_QSPI1A_DATA1__ECSPI1_MISO                       0x0184 0x04CC 0x0714 0x2 0x1
-#define MX6SX_PAD_QSPI1A_DATA1__ESAI_TX1                          0x0184 0x04CC 0x0794 0x3 0x2
-#define MX6SX_PAD_QSPI1A_DATA1__CSI1_DATA_13                      0x0184 0x04CC 0x06D0 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17                       0x0184 0x04CC 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__WEIM_DATA_5                       0x0184 0x04CC 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__SIM_M_HADDR_4                     0x0184 0x04CC 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__SDMA_DEBUG_PC_0                   0x0184 0x04CC 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2                    0x0188 0x04D0 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__USB_OTG1_PWR                      0x0188 0x04D0 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__ECSPI5_SS1                        0x0188 0x04D0 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__ESAI_TX_CLK                       0x0188 0x04D0 0x078C 0x3 0x2
-#define MX6SX_PAD_QSPI1A_DATA2__CSI1_DATA_12                      0x0188 0x04D0 0x06CC 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18                       0x0188 0x04D0 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__WEIM_DATA_4                       0x0188 0x04D0 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__SIM_M_HADDR_6                     0x0188 0x04D0 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__SDMA_DEBUG_PC_1                   0x0188 0x04D0 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3                    0x018C 0x04D4 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__USB_OTG1_OC                       0x018C 0x04D4 0x0860 0x1 0x2
-#define MX6SX_PAD_QSPI1A_DATA3__ECSPI5_SS2                        0x018C 0x04D4 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__ESAI_TX0                          0x018C 0x04D4 0x0790 0x3 0x2
-#define MX6SX_PAD_QSPI1A_DATA3__CSI1_DATA_11                      0x018C 0x04D4 0x06C8 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19                       0x018C 0x04D4 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__WEIM_DATA_3                       0x018C 0x04D4 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__SIM_M_HADDR_7                     0x018C 0x04D4 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__SDMA_DEBUG_PC_2                   0x018C 0x04D4 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DQS__QSPI1_A_DQS                         0x0190 0x04D8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DQS__CAN2_TX                             0x0190 0x04D8 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1A_DQS__CANFD_TX2                           0x0190 0x04D8 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1A_DQS__ECSPI5_MOSI                         0x0190 0x04D8 0x0758 0x3 0x1
-#define MX6SX_PAD_QSPI1A_DQS__CSI1_DATA_15                        0x0190 0x04D8 0x06D8 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DQS__GPIO4_IO_20                         0x0190 0x04D8 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DQS__WEIM_DATA_7                         0x0190 0x04D8 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DQS__SIM_M_HADDR_13                      0x0190 0x04D8 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DQS__SDMA_DEBUG_BUS_DEVICE_4             0x0190 0x04D8 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK                       0x0194 0x04DC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__ANATOP_OTG2_ID                     0x0194 0x04DC 0x0628 0x1 0x2
-#define MX6SX_PAD_QSPI1A_SCLK__ECSPI1_SCLK                        0x0194 0x04DC 0x0710 0x2 0x1
-#define MX6SX_PAD_QSPI1A_SCLK__ESAI_TX2_RX3                       0x0194 0x04DC 0x0798 0x3 0x2
-#define MX6SX_PAD_QSPI1A_SCLK__CSI1_DATA_1                        0x0194 0x04DC 0x06A4 0x4 0x1
-#define MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21                        0x0194 0x04DC 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__WEIM_DATA_0                        0x0194 0x04DC 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__SIM_M_HADDR_0                      0x0194 0x04DC 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__SDMA_DEBUG_PC_5                    0x0194 0x04DC 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B                     0x0198 0x04E0 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__USB_OTG2_PWR                      0x0198 0x04E0 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__ECSPI1_SS0                        0x0198 0x04E0 0x071C 0x2 0x1
-#define MX6SX_PAD_QSPI1A_SS0_B__ESAI_TX3_RX2                      0x0198 0x04E0 0x079C 0x3 0x2
-#define MX6SX_PAD_QSPI1A_SS0_B__CSI1_DATA_0                       0x0198 0x04E0 0x06A0 0x4 0x1
-#define MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22                       0x0198 0x04E0 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__WEIM_DATA_1                       0x0198 0x04E0 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__SIM_M_HADDR_1                     0x0198 0x04E0 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__SDMA_DEBUG_PC_4                   0x0198 0x04E0 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__QSPI1_A_SS1_B                     0x019C 0x04E4 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX                           0x019C 0x04E4 0x068C 0x1 0x2
-#define MX6SX_PAD_QSPI1A_SS1_B__CANFD_RX1                         0x019C 0x04E4 0x0694 0x2 0x2
-#define MX6SX_PAD_QSPI1A_SS1_B__ECSPI5_MISO                       0x019C 0x04E4 0x0754 0x3 0x1
-#define MX6SX_PAD_QSPI1A_SS1_B__CSI1_DATA_10                      0x019C 0x04E4 0x06FC 0x4 0x1
-#define MX6SX_PAD_QSPI1A_SS1_B__GPIO4_IO_23                       0x019C 0x04E4 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__WEIM_DATA_2                       0x019C 0x04E4 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                    0x019C 0x04E4 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                   0x019C 0x04E4 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                    0x01A0 0x04E8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS                     0x01A0 0x04E8 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__UART3_DTE_RTS                     0x01A0 0x04E8 0x083C 0x1 0x4
-#define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI                       0x01A0 0x04E8 0x0738 0x2 0x1
-#define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS                        0x01A0 0x04E8 0x0778 0x3 0x2
-#define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22                      0x01A0 0x04E8 0x06F4 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24                       0x01A0 0x04E8 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14                      0x01A0 0x04E8 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9                     0x01A0 0x04E8 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1                    0x01A4 0x04EC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS                     0x01A4 0x04EC 0x083C 0x1 0x5
-#define MX6SX_PAD_QSPI1B_DATA1__UART3_DTE_CTS                     0x01A4 0x04EC 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO                       0x01A4 0x04EC 0x0734 0x2 0x1
-#define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK                       0x01A4 0x04EC 0x0788 0x3 0x2
-#define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21                      0x01A4 0x04EC 0x06F0 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25                       0x01A4 0x04EC 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__WEIM_DATA_13                      0x01A4 0x04EC 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__SIM_M_HADDR_8                     0x01A4 0x04EC 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2                    0x01A8 0x04F0 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__I2C2_SDA                          0x01A8 0x04F0 0x07B4 0x1 0x2
-#define MX6SX_PAD_QSPI1B_DATA2__ECSPI5_RDY                        0x01A8 0x04F0 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__ESAI_TX5_RX0                      0x01A8 0x04F0 0x07A4 0x3 0x2
-#define MX6SX_PAD_QSPI1B_DATA2__CSI1_DATA_20                      0x01A8 0x04F0 0x06EC 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26                       0x01A8 0x04F0 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__WEIM_DATA_12                      0x01A8 0x04F0 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__SIM_M_HADDR_5                     0x01A8 0x04F0 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3                    0x01AC 0x04F4 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__I2C2_SCL                          0x01AC 0x04F4 0x07B0 0x1 0x2
-#define MX6SX_PAD_QSPI1B_DATA3__ECSPI5_SS3                        0x01AC 0x04F4 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__ESAI_TX_FS                        0x01AC 0x04F4 0x077C 0x3 0x2
-#define MX6SX_PAD_QSPI1B_DATA3__CSI1_DATA_19                      0x01AC 0x04F4 0x06E8 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27                       0x01AC 0x04F4 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__WEIM_DATA_11                      0x01AC 0x04F4 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__SIM_M_HADDR_2                     0x01AC 0x04F4 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_DQS__QSPI1_B_DQS                         0x01B0 0x04F8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DQS__CAN1_TX                             0x01B0 0x04F8 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1B_DQS__CANFD_TX1                           0x01B0 0x04F8 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1B_DQS__ECSPI5_SS0                          0x01B0 0x04F8 0x075C 0x3 0x1
-#define MX6SX_PAD_QSPI1B_DQS__CSI1_DATA_23                        0x01B0 0x04F8 0x06F8 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DQS__GPIO4_IO_28                         0x01B0 0x04F8 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15                        0x01B0 0x04F8 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15                      0x01B0 0x04F8 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK                       0x01B4 0x04FC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX                       0x01B4 0x04FC 0x0840 0x1 0x4
-#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX                       0x01B4 0x04FC 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK                        0x01B4 0x04FC 0x0730 0x2 0x1
-#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK                     0x01B4 0x04FC 0x0780 0x3 0x2
-#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16                       0x01B4 0x04FC 0x06DC 0x4 0x1
-#define MX6SX_PAD_QSPI1B_SCLK__GPIO4_IO_29                        0x01B4 0x04FC 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8                        0x01B4 0x04FC 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11                     0x01B4 0x04FC 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B                     0x01B8 0x0500 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX                      0x01B8 0x0500 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX                      0x01B8 0x0500 0x0840 0x1 0x5
-#define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0                        0x01B8 0x0500 0x073C 0x2 0x1
-#define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK                    0x01B8 0x0500 0x0784 0x3 0x3
-#define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17                      0x01B8 0x0500 0x06E0 0x4 0x1
-#define MX6SX_PAD_QSPI1B_SS0_B__GPIO4_IO_30                       0x01B8 0x0500 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__WEIM_DATA_9                       0x01B8 0x0500 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__SIM_M_HADDR_10                    0x01B8 0x0500 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_SS1_B__QSPI1_B_SS1_B                     0x01BC 0x0504 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX                           0x01BC 0x0504 0x0690 0x1 0x2
-#define MX6SX_PAD_QSPI1B_SS1_B__CANFD_RX2                         0x01BC 0x0504 0x0698 0x2 0x2
-#define MX6SX_PAD_QSPI1B_SS1_B__ECSPI5_SCLK                       0x01BC 0x0504 0x0750 0x3 0x1
-#define MX6SX_PAD_QSPI1B_SS1_B__CSI1_DATA_18                      0x01BC 0x0504 0x06E4 0x4 0x1
-#define MX6SX_PAD_QSPI1B_SS1_B__GPIO4_IO_31                       0x01BC 0x0504 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_SS1_B__WEIM_DATA_10                      0x01BC 0x0504 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_SS1_B__SIM_M_HADDR_14                    0x01BC 0x0504 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0                     0x01C0 0x0508 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RD0__GPIO5_IO_0                          0x01C0 0x0508 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RD0__CSI2_DATA_10                        0x01C0 0x0508 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RD0__ANATOP_TESTI_0                      0x01C0 0x0508 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD0__RAWNAND_TESTER_TRIGGER              0x01C0 0x0508 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RD0__PCIE_CTRL_DEBUG_0                   0x01C0 0x0508 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1                     0x01C4 0x050C 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RD1__GPIO5_IO_1                          0x01C4 0x050C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RD1__CSI2_DATA_11                        0x01C4 0x050C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RD1__ANATOP_TESTI_1                      0x01C4 0x050C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD1__USDHC1_TESTER_TRIGGER               0x01C4 0x050C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RD1__PCIE_CTRL_DEBUG_1                   0x01C4 0x050C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2                     0x01C8 0x0510 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RD2__GPIO5_IO_2                          0x01C8 0x0510 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RD2__CSI2_DATA_12                        0x01C8 0x0510 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RD2__ANATOP_TESTI_2                      0x01C8 0x0510 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD2__USDHC2_TESTER_TRIGGER               0x01C8 0x0510 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RD2__PCIE_CTRL_DEBUG_2                   0x01C8 0x0510 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3                     0x01CC 0x0514 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RD3__GPIO5_IO_3                          0x01CC 0x0514 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RD3__CSI2_DATA_13                        0x01CC 0x0514 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RD3__ANATOP_TESTI_3                      0x01CC 0x0514 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD3__USDHC3_TESTER_TRIGGER               0x01CC 0x0514 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RD3__PCIE_CTRL_DEBUG_3                   0x01CC 0x0514 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN                      0x01D0 0x0518 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__GPIO5_IO_4                       0x01D0 0x0518 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__CSI2_DATA_14                     0x01D0 0x0518 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__ANATOP_TESTO_0                   0x01D0 0x0518 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__USDHC4_TESTER_TRIGGER            0x01D0 0x0518 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__PCIE_CTRL_DEBUG_4                0x01D0 0x0518 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK                        0x01D4 0x051C 0x0768 0x0 0x1
-#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER                         0x01D4 0x051C 0x0000 0x1 0x0
-#define MX6SX_PAD_RGMII1_RXC__GPIO5_IO_5                          0x01D4 0x051C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RXC__CSI2_DATA_15                        0x01D4 0x051C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RXC__ANATOP_TESTO_1                      0x01D4 0x051C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RXC__ECSPI1_TESTER_TRIGGER               0x01D4 0x051C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RXC__PCIE_CTRL_DEBUG_5                   0x01D4 0x051C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0                     0x01D8 0x0520 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TD0__SAI2_RX_SYNC                        0x01D8 0x0520 0x0810 0x2 0x1
-#define MX6SX_PAD_RGMII1_TD0__GPIO5_IO_6                          0x01D8 0x0520 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TD0__CSI2_DATA_16                        0x01D8 0x0520 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TD0__ANATOP_TESTO_2                      0x01D8 0x0520 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TD0__ECSPI2_TESTER_TRIGGER               0x01D8 0x0520 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TD0__PCIE_CTRL_DEBUG_6                   0x01D8 0x0520 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1                     0x01DC 0x0524 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TD1__SAI2_RX_BCLK                        0x01DC 0x0524 0x0808 0x2 0x1
-#define MX6SX_PAD_RGMII1_TD1__GPIO5_IO_7                          0x01DC 0x0524 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TD1__CSI2_DATA_17                        0x01DC 0x0524 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TD1__ANATOP_TESTO_3                      0x01DC 0x0524 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TD1__ECSPI3_TESTER_TRIGGER               0x01DC 0x0524 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TD1__PCIE_CTRL_DEBUG_7                   0x01DC 0x0524 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2                     0x01E0 0x0528 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TD2__SAI2_TX_SYNC                        0x01E0 0x0528 0x0818 0x2 0x1
-#define MX6SX_PAD_RGMII1_TD2__GPIO5_IO_8                          0x01E0 0x0528 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TD2__CSI2_DATA_18                        0x01E0 0x0528 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TD2__ANATOP_TESTO_4                      0x01E0 0x0528 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TD2__ECSPI4_TESTER_TRIGGER               0x01E0 0x0528 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TD2__PCIE_CTRL_DEBUG_8                   0x01E0 0x0528 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3                     0x01E4 0x052C 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TD3__SAI2_TX_BCLK                        0x01E4 0x052C 0x0814 0x2 0x1
-#define MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9                          0x01E4 0x052C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TD3__CSI2_DATA_19                        0x01E4 0x052C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TD3__ANATOP_TESTO_5                      0x01E4 0x052C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TD3__ECSPI5_TESTER_TRIGGER               0x01E4 0x052C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TD3__PCIE_CTRL_DEBUG_9                   0x01E4 0x052C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN                      0x01E8 0x0530 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__SAI2_RX_DATA_0                   0x01E8 0x0530 0x080C 0x2 0x1
-#define MX6SX_PAD_RGMII1_TX_CTL__GPIO5_IO_10                      0x01E8 0x0530 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__CSI2_DATA_0                      0x01E8 0x0530 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__ANATOP_TESTO_6                   0x01E8 0x0530 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__QSPI1_TESTER_TRIGGER             0x01E8 0x0530 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__PCIE_CTRL_DEBUG_10               0x01E8 0x0530 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC                     0x01EC 0x0534 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TXC__ENET1_TX_ER                         0x01EC 0x0534 0x0000 0x1 0x0
-#define MX6SX_PAD_RGMII1_TXC__SAI2_TX_DATA_0                      0x01EC 0x0534 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII1_TXC__GPIO5_IO_11                         0x01EC 0x0534 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TXC__CSI2_DATA_1                         0x01EC 0x0534 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TXC__ANATOP_TESTO_7                      0x01EC 0x0534 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TXC__QSPI2_TESTER_TRIGGER                0x01EC 0x0534 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TXC__PCIE_CTRL_DEBUG_11                  0x01EC 0x0534 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0                     0x01F0 0x0538 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RD0__PWM4_OUT                            0x01F0 0x0538 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_RD0__GPIO5_IO_12                         0x01F0 0x0538 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RD0__CSI2_DATA_2                         0x01F0 0x0538 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RD0__ANATOP_TESTO_8                      0x01F0 0x0538 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RD0__VDEC_DEBUG_18                       0x01F0 0x0538 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RD0__PCIE_CTRL_DEBUG_12                  0x01F0 0x0538 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1                     0x01F4 0x053C 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RD1__PWM3_OUT                            0x01F4 0x053C 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_RD1__GPIO5_IO_13                         0x01F4 0x053C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RD1__CSI2_DATA_3                         0x01F4 0x053C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RD1__ANATOP_TESTO_9                      0x01F4 0x053C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RD1__VDEC_DEBUG_19                       0x01F4 0x053C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RD1__PCIE_CTRL_DEBUG_13                  0x01F4 0x053C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2                     0x01F8 0x0540 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RD2__PWM2_OUT                            0x01F8 0x0540 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_RD2__GPIO5_IO_14                         0x01F8 0x0540 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RD2__CSI2_DATA_4                         0x01F8 0x0540 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RD2__ANATOP_TESTO_10                     0x01F8 0x0540 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RD2__VDEC_DEBUG_20                       0x01F8 0x0540 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RD2__PCIE_CTRL_DEBUG_14                  0x01F8 0x0540 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3                     0x01FC 0x0544 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RD3__PWM1_OUT                            0x01FC 0x0544 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_RD3__GPIO5_IO_15                         0x01FC 0x0544 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RD3__CSI2_DATA_5                         0x01FC 0x0544 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RD3__ANATOP_TESTO_11                     0x01FC 0x0544 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RD3__VDEC_DEBUG_21                       0x01FC 0x0544 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RD3__PCIE_CTRL_DEBUG_15                  0x01FC 0x0544 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN                      0x0200 0x0548 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__GPIO5_IO_16                      0x0200 0x0548 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__CSI2_DATA_6                      0x0200 0x0548 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__ANATOP_TESTO_12                  0x0200 0x0548 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__VDEC_DEBUG_22                    0x0200 0x0548 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__PCIE_CTRL_DEBUG_16               0x0200 0x0548 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK                        0x0204 0x054C 0x0774 0x0 0x1
-#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_ER                         0x0204 0x054C 0x0000 0x1 0x0
-#define MX6SX_PAD_RGMII2_RXC__GPIO5_IO_17                         0x0204 0x054C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RXC__CSI2_DATA_7                         0x0204 0x054C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RXC__ANATOP_TESTO_13                     0x0204 0x054C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RXC__VDEC_DEBUG_23                       0x0204 0x054C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RXC__PCIE_CTRL_DEBUG_17                  0x0204 0x054C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0                     0x0208 0x0550 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TD0__SAI1_RX_SYNC                        0x0208 0x0550 0x07FC 0x2 0x1
-#define MX6SX_PAD_RGMII2_TD0__PWM8_OUT                            0x0208 0x0550 0x0000 0x3 0x0
-#define MX6SX_PAD_RGMII2_TD0__GPIO5_IO_18                         0x0208 0x0550 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TD0__CSI2_DATA_8                         0x0208 0x0550 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TD0__ANATOP_TESTO_14                     0x0208 0x0550 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TD0__VDEC_DEBUG_24                       0x0208 0x0550 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TD0__PCIE_CTRL_DEBUG_18                  0x0208 0x0550 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1                     0x020C 0x0554 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TD1__SAI1_RX_BCLK                        0x020C 0x0554 0x07F4 0x2 0x1
-#define MX6SX_PAD_RGMII2_TD1__PWM7_OUT                            0x020C 0x0554 0x0000 0x3 0x0
-#define MX6SX_PAD_RGMII2_TD1__GPIO5_IO_19                         0x020C 0x0554 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TD1__CSI2_DATA_9                         0x020C 0x0554 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TD1__ANATOP_TESTO_15                     0x020C 0x0554 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TD1__VDEC_DEBUG_25                       0x020C 0x0554 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TD1__PCIE_CTRL_DEBUG_19                  0x020C 0x0554 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2                     0x0210 0x0558 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TD2__SAI1_TX_SYNC                        0x0210 0x0558 0x0804 0x2 0x1
-#define MX6SX_PAD_RGMII2_TD2__PWM6_OUT                            0x0210 0x0558 0x0000 0x3 0x0
-#define MX6SX_PAD_RGMII2_TD2__GPIO5_IO_20                         0x0210 0x0558 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TD2__CSI2_VSYNC                          0x0210 0x0558 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TD2__SJC_FAIL                            0x0210 0x0558 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TD2__VDEC_DEBUG_26                       0x0210 0x0558 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TD2__PCIE_CTRL_DEBUG_20                  0x0210 0x0558 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3                     0x0214 0x055C 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TD3__SAI1_TX_BCLK                        0x0214 0x055C 0x0800 0x2 0x1
-#define MX6SX_PAD_RGMII2_TD3__PWM5_OUT                            0x0214 0x055C 0x0000 0x3 0x0
-#define MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21                         0x0214 0x055C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TD3__CSI2_HSYNC                          0x0214 0x055C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TD3__SJC_JTAG_ACT                        0x0214 0x055C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TD3__VDEC_DEBUG_27                       0x0214 0x055C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TD3__PCIE_CTRL_DEBUG_21                  0x0214 0x055C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN                      0x0218 0x0560 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__SAI1_RX_DATA_0                   0x0218 0x0560 0x07F8 0x2 0x1
-#define MX6SX_PAD_RGMII2_TX_CTL__GPIO5_IO_22                      0x0218 0x0560 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__CSI2_FIELD                       0x0218 0x0560 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__SJC_DE_B                         0x0218 0x0560 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__VDEC_DEBUG_28                    0x0218 0x0560 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__PCIE_CTRL_DEBUG_22               0x0218 0x0560 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC                     0x021C 0x0564 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TXC__ENET2_TX_ER                         0x021C 0x0564 0x0000 0x1 0x0
-#define MX6SX_PAD_RGMII2_TXC__SAI1_TX_DATA_0                      0x021C 0x0564 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_TXC__GPIO5_IO_23                         0x021C 0x0564 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TXC__CSI2_PIXCLK                         0x021C 0x0564 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TXC__SJC_DONE                            0x021C 0x0564 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TXC__VDEC_DEBUG_29                       0x021C 0x0564 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TXC__PCIE_CTRL_DEBUG_23                  0x021C 0x0564 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_CLK__USDHC1_CLK                             0x0220 0x0568 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_CLK__AUDMUX_AUD5_RXFS                       0x0220 0x0568 0x0668 0x1 0x1
-#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_B                           0x0220 0x0568 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_CLK__GPT_CLK                                0x0220 0x0568 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_RST_B_DEB                   0x0220 0x0568 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_CLK__GPIO6_IO_0                             0x0220 0x0568 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_CLK__ENET2_1588_EVENT1_OUT                  0x0220 0x0568 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_CLK__CCM_OUT1                               0x0220 0x0568 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_CLK__VADC_ADC_PROC_CLK                      0x0220 0x0568 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_CLK__MMDC_DEBUG_45                          0x0220 0x0568 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_CMD__USDHC1_CMD                             0x0224 0x056C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_CMD__AUDMUX_AUD5_RXC                        0x0224 0x056C 0x0664 0x1 0x1
-#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_B                           0x0224 0x056C 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_CMD__GPT_COMPARE1                           0x0224 0x056C 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_RST_B_DEB                   0x0224 0x056C 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_CMD__GPIO6_IO_1                             0x0224 0x056C 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_CMD__ENET2_1588_EVENT1_IN                   0x0224 0x056C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_CMD__CCM_CLKO1                              0x0224 0x056C 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_CMD__VADC_EXT_SYSCLK                        0x0224 0x056C 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_CMD__MMDC_DEBUG_46                          0x0224 0x056C 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_DATA0__USDHC1_DATA0                         0x0228 0x0570 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD                      0x0228 0x0570 0x065C 0x1 0x1
-#define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS             0x0228 0x0570 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1                         0x0228 0x0570 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA0__UART2_DCE_RX                         0x0228 0x0570 0x0838 0x4 0x2
-#define MX6SX_PAD_SD1_DATA0__UART2_DTE_TX                         0x0228 0x0570 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2                           0x0228 0x0570 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN                 0x0228 0x0570 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_DATA0__CCM_OUT2                             0x0228 0x0570 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_DATA0__VADC_CLAMP_UP                        0x0228 0x0570 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_DATA0__MMDC_DEBUG_48                        0x0228 0x0570 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_DATA1__USDHC1_DATA1                         0x022C 0x0574 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC                      0x022C 0x0574 0x066C 0x1 0x1
-#define MX6SX_PAD_SD1_DATA1__PWM4_OUT                             0x022C 0x0574 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2                         0x022C 0x0574 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA1__UART2_DCE_TX                         0x022C 0x0574 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_DATA1__UART2_DTE_RX                         0x022C 0x0574 0x0838 0x4 0x3
-#define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3                           0x022C 0x0574 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT                0x022C 0x0574 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_DATA1__CCM_CLKO2                            0x022C 0x0574 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_DATA1__VADC_CLAMP_DOWN                      0x022C 0x0574 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_DATA1__MMDC_DEBUG_47                        0x022C 0x0574 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_DATA2__USDHC1_DATA2                         0x0230 0x0578 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                     0x0230 0x0578 0x0670 0x1 0x1
-#define MX6SX_PAD_SD1_DATA2__PWM3_OUT                             0x0230 0x0578 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2                         0x0230 0x0578 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS                        0x0230 0x0578 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_DATA2__UART2_DTE_RTS                        0x0230 0x0578 0x0834 0x4 0x2
-#define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4                           0x0230 0x0578 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY                           0x0230 0x0578 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_DATA2__CCM_OUT0                             0x0230 0x0578 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_DATA2__VADC_EXT_PD_N                        0x0230 0x0578 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_DATA3__USDHC1_DATA3                         0x0234 0x057C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD                      0x0234 0x057C 0x0660 0x1 0x1
-#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD                      0x0234 0x057C 0x065C 0x2 0x2
-#define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3                         0x0234 0x057C 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS                        0x0234 0x057C 0x0834 0x4 0x3
-#define MX6SX_PAD_SD1_DATA3__UART2_DTE_CTS                        0x0234 0x057C 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5                           0x0234 0x057C 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1                           0x0234 0x057C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY                         0x0234 0x057C 0x069C 0x7 0x2
-#define MX6SX_PAD_SD1_DATA3__VADC_RST_N                           0x0234 0x057C 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_CLK__USDHC2_CLK                             0x0238 0x0580 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_CLK__AUDMUX_AUD6_RXFS                       0x0238 0x0580 0x0680 0x1 0x2
-#define MX6SX_PAD_SD2_CLK__KPP_COL_5                              0x0238 0x0580 0x07C8 0x2 0x1
-#define MX6SX_PAD_SD2_CLK__ECSPI4_SCLK                            0x0238 0x0580 0x0740 0x3 0x1
-#define MX6SX_PAD_SD2_CLK__MLB_SIG                                0x0238 0x0580 0x07F0 0x4 0x2
-#define MX6SX_PAD_SD2_CLK__GPIO6_IO_6                             0x0238 0x0580 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_CLK__MQS_RIGHT                              0x0238 0x0580 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_CLK__WDOG1_WDOG_ANY                         0x0238 0x0580 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_CLK__VADC_CLAMP_CURRENT_5                   0x0238 0x0580 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_CLK__MMDC_DEBUG_29                          0x0238 0x0580 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_CMD__USDHC2_CMD                             0x023C 0x0584 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_CMD__AUDMUX_AUD6_RXC                        0x023C 0x0584 0x067C 0x1 0x2
-#define MX6SX_PAD_SD2_CMD__KPP_ROW_5                              0x023C 0x0584 0x07D4 0x2 0x1
-#define MX6SX_PAD_SD2_CMD__ECSPI4_MOSI                            0x023C 0x0584 0x0748 0x3 0x1
-#define MX6SX_PAD_SD2_CMD__MLB_CLK                                0x023C 0x0584 0x07E8 0x4 0x2
-#define MX6SX_PAD_SD2_CMD__GPIO6_IO_7                             0x023C 0x0584 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_CMD__MQS_LEFT                               0x023C 0x0584 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_CMD__WDOG3_WDOG_B                           0x023C 0x0584 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_CMD__VADC_CLAMP_CURRENT_4                   0x023C 0x0584 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_CMD__MMDC_DEBUG_30                          0x023C 0x0584 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_DATA0__USDHC2_DATA0                         0x0240 0x0588 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_DATA0__AUDMUX_AUD6_RXD                      0x0240 0x0588 0x0674 0x1 0x2
-#define MX6SX_PAD_SD2_DATA0__KPP_ROW_7                            0x0240 0x0588 0x07DC 0x2 0x1
-#define MX6SX_PAD_SD2_DATA0__PWM1_OUT                             0x0240 0x0588 0x0000 0x3 0x0
-#define MX6SX_PAD_SD2_DATA0__I2C4_SDA                             0x0240 0x0588 0x07C4 0x4 0x3
-#define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8                           0x0240 0x0588 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3                           0x0240 0x0588 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA0__UART4_DCE_RX                         0x0240 0x0588 0x0848 0x7 0x4
-#define MX6SX_PAD_SD2_DATA0__UART4_DTE_TX                         0x0240 0x0588 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0                 0x0240 0x0588 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50                        0x0240 0x0588 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1                         0x0244 0x058C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_DATA1__AUDMUX_AUD6_TXC                      0x0244 0x058C 0x0684 0x1 0x2
-#define MX6SX_PAD_SD2_DATA1__KPP_COL_7                            0x0244 0x058C 0x07D0 0x2 0x1
-#define MX6SX_PAD_SD2_DATA1__PWM2_OUT                             0x0244 0x058C 0x0000 0x3 0x0
-#define MX6SX_PAD_SD2_DATA1__I2C4_SCL                             0x0244 0x058C 0x07C0 0x4 0x3
-#define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9                           0x0244 0x058C 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2                           0x0244 0x058C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA1__UART4_DCE_TX                         0x0244 0x058C 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_DATA1__UART4_DTE_RX                         0x0244 0x058C 0x0848 0x7 0x5
-#define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1                 0x0244 0x058C 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49                        0x0244 0x058C 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2                         0x0248 0x0590 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_DATA2__AUDMUX_AUD6_TXFS                     0x0248 0x0590 0x0688 0x1 0x2
-#define MX6SX_PAD_SD2_DATA2__KPP_ROW_6                            0x0248 0x0590 0x07D8 0x2 0x1
-#define MX6SX_PAD_SD2_DATA2__ECSPI4_SS0                           0x0248 0x0590 0x074C 0x3 0x1
-#define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0                     0x0248 0x0590 0x081C 0x4 0x2
-#define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10                          0x0248 0x0590 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_DATA2__SPDIF_OUT                            0x0248 0x0590 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA2__UART6_DCE_RX                         0x0248 0x0590 0x0858 0x7 0x4
-#define MX6SX_PAD_SD2_DATA2__UART6_DTE_TX                         0x0248 0x0590 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2                 0x0248 0x0590 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32                        0x0248 0x0590 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3                         0x024C 0x0594 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_DATA3__AUDMUX_AUD6_TXD                      0x024C 0x0594 0x0678 0x1 0x2
-#define MX6SX_PAD_SD2_DATA3__KPP_COL_6                            0x024C 0x0594 0x07CC 0x2 0x1
-#define MX6SX_PAD_SD2_DATA3__ECSPI4_MISO                          0x024C 0x0594 0x0744 0x3 0x1
-#define MX6SX_PAD_SD2_DATA3__MLB_DATA                             0x024C 0x0594 0x07EC 0x4 0x2
-#define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11                          0x024C 0x0594 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_DATA3__SPDIF_IN                             0x024C 0x0594 0x0824 0x6 0x4
-#define MX6SX_PAD_SD2_DATA3__UART6_DCE_TX                         0x024C 0x0594 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_DATA3__UART6_DTE_RX                         0x024C 0x0594 0x0858 0x7 0x5
-#define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                 0x024C 0x0594 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31                        0x024C 0x0594 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_CLK__USDHC3_CLK                             0x0250 0x0598 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CLK__UART4_DCE_CTS                          0x0250 0x0598 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_CLK__UART4_DTE_RTS                          0x0250 0x0598 0x0844 0x1 0x0
-#define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK                            0x0250 0x0598 0x0740 0x2 0x0
-#define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                       0x0250 0x0598 0x0680 0x3 0x0
-#define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC                           0x0250 0x0598 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_CLK__GPIO7_IO_0                             0x0250 0x0598 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_CLK__LCDIF2_BUSY                            0x0250 0x0598 0x07E4 0x6 0x0
-#define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29                         0x0250 0x0598 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5             0x0250 0x0598 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_CMD__USDHC3_CMD                             0x0254 0x059C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CMD__UART4_DCE_TX                           0x0254 0x059C 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_CMD__UART4_DTE_RX                           0x0254 0x059C 0x0848 0x1 0x0
-#define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI                            0x0254 0x059C 0x0748 0x2 0x0
-#define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC                        0x0254 0x059C 0x067C 0x3 0x0
-#define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC                           0x0254 0x059C 0x07E4 0x4 0x1
-#define MX6SX_PAD_SD3_CMD__GPIO7_IO_1                             0x0254 0x059C 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_CMD__LCDIF2_RS                              0x0254 0x059C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_CMD__TPSMP_HDATA_28                         0x0254 0x059C 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4             0x0254 0x059C 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA0__USDHC3_DATA0                         0x0258 0x05A0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA0__I2C4_SCL                             0x0258 0x05A0 0x07C0 0x1 0x0
-#define MX6SX_PAD_SD3_DATA0__ECSPI2_SS1                           0x0258 0x05A0 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA0__AUDMUX_AUD6_RXD                      0x0258 0x05A0 0x0674 0x3 0x0
-#define MX6SX_PAD_SD3_DATA0__LCDIF2_DATA_1                        0x0258 0x05A0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA0__GPIO7_IO_2                           0x0258 0x05A0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA0__DCIC1_OUT                            0x0258 0x05A0 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA0__TPSMP_HDATA_30                       0x0258 0x05A0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA0__GPU_DEBUG_0                          0x0258 0x05A0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0           0x0258 0x05A0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA1__USDHC3_DATA1                         0x025C 0x05A4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA1__I2C4_SDA                             0x025C 0x05A4 0x07C4 0x1 0x0
-#define MX6SX_PAD_SD3_DATA1__ECSPI2_SS2                           0x025C 0x05A4 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA1__AUDMUX_AUD6_TXC                      0x025C 0x05A4 0x0684 0x3 0x0
-#define MX6SX_PAD_SD3_DATA1__LCDIF2_DATA_0                        0x025C 0x05A4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA1__GPIO7_IO_3                           0x025C 0x05A4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA1__DCIC2_OUT                            0x025C 0x05A4 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA1__TPSMP_HDATA_31                       0x025C 0x05A4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1                          0x025C 0x05A4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1           0x025C 0x05A4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2                         0x0260 0x05A8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS                        0x0260 0x05A8 0x0844 0x1 0x1
-#define MX6SX_PAD_SD3_DATA2__UART4_DTE_CTS                        0x0260 0x05A8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0                           0x0260 0x05A8 0x074C 0x2 0x0
-#define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS                     0x0260 0x05A8 0x0688 0x3 0x0
-#define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK                           0x0260 0x05A8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA2__GPIO7_IO_4                           0x0260 0x05A8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA2__LCDIF2_WR_RWN                        0x0260 0x05A8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA2__TPSMP_HDATA_26                       0x0260 0x05A8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2                          0x0260 0x05A8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2           0x0260 0x05A8 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3                         0x0264 0x05AC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA3__UART4_DCE_RX                         0x0264 0x05AC 0x0848 0x1 0x1
-#define MX6SX_PAD_SD3_DATA3__UART4_DTE_TX                         0x0264 0x05AC 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO                          0x0264 0x05AC 0x0744 0x2 0x0
-#define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD                      0x0264 0x05AC 0x0678 0x3 0x0
-#define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE                        0x0264 0x05AC 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA3__GPIO7_IO_5                           0x0264 0x05AC 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA3__LCDIF2_RD_E                          0x0264 0x05AC 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA3__TPSMP_HDATA_27                       0x0264 0x05AC 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA3__GPU_DEBUG_3                          0x0264 0x05AC 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA3__SDMA_DEBUG_EVENT_CHANNEL_3           0x0264 0x05AC 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4                         0x0268 0x05B0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA4__CAN2_RX                              0x0268 0x05B0 0x0690 0x1 0x0
-#define MX6SX_PAD_SD3_DATA4__CANFD_RX2                            0x0268 0x05B0 0x0698 0x2 0x0
-#define MX6SX_PAD_SD3_DATA4__UART3_DCE_RX                         0x0268 0x05B0 0x0840 0x3 0x2
-#define MX6SX_PAD_SD3_DATA4__UART3_DTE_TX                         0x0268 0x05B0 0x0000 0x3 0x0
-#define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3                        0x0268 0x05B0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6                           0x0268 0x05B0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN                 0x0268 0x05B0 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA4__TPSMP_HTRANS_1                       0x0268 0x05B0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA4__GPU_DEBUG_4                          0x0268 0x05B0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA4__SDMA_DEBUG_BUS_DEVICE_0              0x0268 0x05B0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5                         0x026C 0x05B4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA5__CAN1_TX                              0x026C 0x05B4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_DATA5__CANFD_TX1                            0x026C 0x05B4 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA5__UART3_DCE_TX                         0x026C 0x05B4 0x0000 0x3 0x0
-#define MX6SX_PAD_SD3_DATA5__UART3_DTE_RX                         0x026C 0x05B4 0x0840 0x3 0x3
-#define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2                        0x026C 0x05B4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7                           0x026C 0x05B4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT                0x026C 0x05B4 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA5__SIM_M_HWRITE                         0x026C 0x05B4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA5__GPU_DEBUG_5                          0x026C 0x05B4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA5__SDMA_DEBUG_BUS_DEVICE_1              0x026C 0x05B4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6                         0x0270 0x05B8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA6__CAN2_TX                              0x0270 0x05B8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_DATA6__CANFD_TX2                            0x0270 0x05B8 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS                        0x0270 0x05B8 0x083C 0x3 0x2
-#define MX6SX_PAD_SD3_DATA6__UART3_DTE_CTS                        0x0270 0x05B8 0x0000 0x3 0x0
-#define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4                        0x0270 0x05B8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8                           0x0270 0x05B8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT                0x0270 0x05B8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA6__TPSMP_HTRANS_0                       0x0270 0x05B8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA6__GPU_DEBUG_7                          0x0270 0x05B8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA6__SDMA_DEBUG_EVT_CHN_LINES_7           0x0270 0x05B8 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7                         0x0274 0x05BC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA7__CAN1_RX                              0x0274 0x05BC 0x068C 0x1 0x0
-#define MX6SX_PAD_SD3_DATA7__CANFD_RX1                            0x0274 0x05BC 0x0694 0x2 0x0
-#define MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS                        0x0274 0x05BC 0x0000 0x3 0x0
-#define MX6SX_PAD_SD3_DATA7__UART3_DTE_RTS                        0x0274 0x05BC 0x083C 0x3 0x3
-#define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5                        0x0274 0x05BC 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9                           0x0274 0x05BC 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                 0x0274 0x05BC 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA7__TPSMP_HDATA_DIR                      0x0274 0x05BC 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA7__GPU_DEBUG_6                          0x0274 0x05BC 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA7__SDMA_DEBUG_EVT_CHN_LINES_2           0x0274 0x05BC 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_CLK__USDHC4_CLK                             0x0278 0x05C0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_CLK__RAWNAND_DATA15                         0x0278 0x05C0 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_CLK__ECSPI2_MISO                            0x0278 0x05C0 0x0724 0x2 0x1
-#define MX6SX_PAD_SD4_CLK__AUDMUX_AUD3_RXFS                       0x0278 0x05C0 0x0638 0x3 0x0
-#define MX6SX_PAD_SD4_CLK__LCDIF2_DATA_13                         0x0278 0x05C0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_CLK__GPIO6_IO_12                            0x0278 0x05C0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_CLK__ECSPI3_SS2                             0x0278 0x05C0 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_CLK__TPSMP_HDATA_20                         0x0278 0x05C0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_CLK__VDEC_DEBUG_12                          0x0278 0x05C0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_CLK__SDMA_DEBUG_EVENT_CHANNEL_SEL           0x0278 0x05C0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_CMD__USDHC4_CMD                             0x027C 0x05C4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_CMD__RAWNAND_DATA14                         0x027C 0x05C4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_CMD__ECSPI2_MOSI                            0x027C 0x05C4 0x0728 0x2 0x1
-#define MX6SX_PAD_SD4_CMD__AUDMUX_AUD3_RXC                        0x027C 0x05C4 0x0634 0x3 0x0
-#define MX6SX_PAD_SD4_CMD__LCDIF2_DATA_14                         0x027C 0x05C4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_CMD__GPIO6_IO_13                            0x027C 0x05C4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_CMD__ECSPI3_SS1                             0x027C 0x05C4 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_CMD__TPSMP_HDATA_19                         0x027C 0x05C4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_CMD__VDEC_DEBUG_11                          0x027C 0x05C4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_CMD__SDMA_DEBUG_CORE_RUN                    0x027C 0x05C4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA0__USDHC4_DATA0                         0x0280 0x05C8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA0__RAWNAND_DATA10                       0x0280 0x05C8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA0__ECSPI2_SS0                           0x0280 0x05C8 0x072C 0x2 0x1
-#define MX6SX_PAD_SD4_DATA0__AUDMUX_AUD3_RXD                      0x0280 0x05C8 0x062C 0x3 0x0
-#define MX6SX_PAD_SD4_DATA0__LCDIF2_DATA_12                       0x0280 0x05C8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA0__GPIO6_IO_14                          0x0280 0x05C8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA0__ECSPI3_SS3                           0x0280 0x05C8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA0__TPSMP_HDATA_21                       0x0280 0x05C8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA0__VDEC_DEBUG_13                        0x0280 0x05C8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA0__SDMA_DEBUG_MODE                      0x0280 0x05C8 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA1__USDHC4_DATA1                         0x0284 0x05CC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA1__RAWNAND_DATA11                       0x0284 0x05CC 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA1__ECSPI2_SCLK                          0x0284 0x05CC 0x0720 0x2 0x1
-#define MX6SX_PAD_SD4_DATA1__AUDMUX_AUD3_TXC                      0x0284 0x05CC 0x063C 0x3 0x0
-#define MX6SX_PAD_SD4_DATA1__LCDIF2_DATA_11                       0x0284 0x05CC 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA1__GPIO6_IO_15                          0x0284 0x05CC 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA1__ECSPI3_RDY                           0x0284 0x05CC 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA1__TPSMP_HDATA_22                       0x0284 0x05CC 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA1__VDEC_DEBUG_14                        0x0284 0x05CC 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA1__SDMA_DEBUG_BUS_ERROR                 0x0284 0x05CC 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA2__USDHC4_DATA2                         0x0288 0x05D0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA2__RAWNAND_DATA12                       0x0288 0x05D0 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA2__I2C2_SDA                             0x0288 0x05D0 0x07B4 0x2 0x0
-#define MX6SX_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS                     0x0288 0x05D0 0x0640 0x3 0x0
-#define MX6SX_PAD_SD4_DATA2__LCDIF2_DATA_10                       0x0288 0x05D0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA2__GPIO6_IO_16                          0x0288 0x05D0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA2__ECSPI2_SS3                           0x0288 0x05D0 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA2__TPSMP_HDATA_23                       0x0288 0x05D0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA2__VDEC_DEBUG_15                        0x0288 0x05D0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA2__SDMA_DEBUG_BUS_RWB                   0x0288 0x05D0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA3__USDHC4_DATA3                         0x028C 0x05D4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA3__RAWNAND_DATA13                       0x028C 0x05D4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA3__I2C2_SCL                             0x028C 0x05D4 0x07B0 0x2 0x0
-#define MX6SX_PAD_SD4_DATA3__AUDMUX_AUD3_TXD                      0x028C 0x05D4 0x0630 0x3 0x0
-#define MX6SX_PAD_SD4_DATA3__LCDIF2_DATA_9                        0x028C 0x05D4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA3__GPIO6_IO_17                          0x028C 0x05D4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA3__ECSPI2_RDY                           0x028C 0x05D4 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA3__TPSMP_HDATA_24                       0x028C 0x05D4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA3__VDEC_DEBUG_16                        0x028C 0x05D4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS             0x028C 0x05D4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4                         0x0290 0x05D8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09                       0x0290 0x05D8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA4__UART5_DCE_RX                         0x0290 0x05D8 0x0850 0x2 0x0
-#define MX6SX_PAD_SD4_DATA4__UART5_DTE_TX                         0x0290 0x05D8 0x0000 0x2 0x0
-#define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK                          0x0290 0x05D8 0x0730 0x3 0x0
-#define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8                        0x0290 0x05D8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18                          0x0290 0x05D8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA4__SPDIF_OUT                            0x0290 0x05D8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA4__TPSMP_HDATA_16                       0x0290 0x05D8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA4__USB_OTG_HOST_MODE                    0x0290 0x05D8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE            0x0290 0x05D8 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5                         0x0294 0x05DC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B                        0x0294 0x05DC 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA5__UART5_DCE_TX                         0x0294 0x05DC 0x0000 0x2 0x0
-#define MX6SX_PAD_SD4_DATA5__UART5_DTE_RX                         0x0294 0x05DC 0x0850 0x2 0x1
-#define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI                          0x0294 0x05DC 0x0738 0x3 0x0
-#define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7                        0x0294 0x05DC 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19                          0x0294 0x05DC 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA5__SPDIF_IN                             0x0294 0x05DC 0x0824 0x6 0x0
-#define MX6SX_PAD_SD4_DATA5__TPSMP_HDATA_17                       0x0294 0x05DC 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA5__VDEC_DEBUG_9                         0x0294 0x05DC 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0           0x0294 0x05DC 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6                         0x0298 0x05E0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B                        0x0298 0x05E0 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS                        0x0298 0x05E0 0x084C 0x2 0x0
-#define MX6SX_PAD_SD4_DATA6__UART5_DTE_CTS                        0x0298 0x05E0 0x0000 0x2 0x0
-#define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO                          0x0298 0x05E0 0x0734 0x3 0x0
-#define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6                        0x0298 0x05E0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20                          0x0298 0x05E0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA6__USDHC4_WP                            0x0298 0x05E0 0x0878 0x6 0x0
-#define MX6SX_PAD_SD4_DATA6__TPSMP_HDATA_18                       0x0298 0x05E0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA6__VDEC_DEBUG_10                        0x0298 0x05E0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1           0x0298 0x05E0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7                         0x029C 0x05E4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08                       0x029C 0x05E4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS                        0x029C 0x05E4 0x0000 0x2 0x0
-#define MX6SX_PAD_SD4_DATA7__UART5_DTE_RTS                        0x029C 0x05E4 0x084C 0x2 0x1
-#define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0                           0x029C 0x05E4 0x073C 0x3 0x0
-#define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15                       0x029C 0x05E4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21                          0x029C 0x05E4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA7__USDHC4_CD_B                          0x029C 0x05E4 0x0874 0x6 0x0
-#define MX6SX_PAD_SD4_DATA7__TPSMP_HDATA_15                       0x029C 0x05E4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA7__USB_OTG_PWR_WAKE                     0x029C 0x05E4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA7__SDMA_DEBUG_YIELD                     0x029C 0x05E4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B                     0x02A0 0x05E8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_RESET_B__RAWNAND_DQS                        0x02A0 0x05E8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET                       0x02A0 0x05E8 0x0000 0x2 0x0
-#define MX6SX_PAD_SD4_RESET_B__AUDMUX_MCLK                        0x02A0 0x05E8 0x0000 0x3 0x0
-#define MX6SX_PAD_SD4_RESET_B__LCDIF2_RESET                       0x02A0 0x05E8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22                        0x02A0 0x05E8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_RESET_B__LCDIF2_CS                          0x02A0 0x05E8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_RESET_B__TPSMP_HDATA_25                     0x02A0 0x05E8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_RESET_B__VDEC_DEBUG_17                      0x02A0 0x05E8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_RESET_B__SDMA_DEBUG_BUS_DEVICE_2            0x02A0 0x05E8 0x0000 0x9 0x0
-#define MX6SX_PAD_USB_H_DATA__USB_H_DATA                          0x02A4 0x05EC 0x0000 0x0 0x0
-#define MX6SX_PAD_USB_H_DATA__PWM2_OUT                            0x02A4 0x05EC 0x0000 0x1 0x0
-#define MX6SX_PAD_USB_H_DATA__ANATOP_24M_OUT                      0x02A4 0x05EC 0x0000 0x2 0x0
-#define MX6SX_PAD_USB_H_DATA__I2C4_SDA                            0x02A4 0x05EC 0x07C4 0x3 0x1
-#define MX6SX_PAD_USB_H_DATA__WDOG3_WDOG_B                        0x02A4 0x05EC 0x0000 0x4 0x0
-#define MX6SX_PAD_USB_H_DATA__GPIO7_IO_10                         0x02A4 0x05EC 0x0000 0x5 0x0
-#define MX6SX_PAD_USB_H_STROBE__USB_H_STROBE                      0x02A8 0x05F0 0x0000 0x0 0x0
-#define MX6SX_PAD_USB_H_STROBE__PWM1_OUT                          0x02A8 0x05F0 0x0000 0x1 0x0
-#define MX6SX_PAD_USB_H_STROBE__ANATOP_32K_OUT                    0x02A8 0x05F0 0x0000 0x2 0x0
-#define MX6SX_PAD_USB_H_STROBE__I2C4_SCL                          0x02A8 0x05F0 0x07C0 0x3 0x1
-#define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB              0x02A8 0x05F0 0x0000 0x4 0x0
-#define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11                       0x02A8 0x05F0 0x0000 0x5 0x0
-
-/* these are not supposed to be used any more and remove them after some time */
-#define MX6SX_PAD_GPIO1_IO04__UART1_RX		MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX
-#define MX6SX_PAD_GPIO1_IO04__UART1_TX		MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX
-#define MX6SX_PAD_GPIO1_IO05__UART1_RX		MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX
-#define MX6SX_PAD_GPIO1_IO05__UART1_TX		MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX
-#define MX6SX_PAD_GPIO1_IO06__UART2_RX		MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX
-#define MX6SX_PAD_GPIO1_IO06__UART2_TX		MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX
-#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B	MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS
-#define MX6SX_PAD_GPIO1_IO07__UART2_RX		MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX
-#define MX6SX_PAD_GPIO1_IO07__UART2_TX		MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX
-#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B	MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS
-#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B	MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS
-#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B	MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS
-#define MX6SX_PAD_CSI_DATA04__UART6_RX		MX6SX_PAD_CSI_DATA04__UART6_DCE_RX
-#define MX6SX_PAD_CSI_DATA04__UART6_TX		MX6SX_PAD_CSI_DATA04__UART6_DTE_TX
-#define MX6SX_PAD_CSI_DATA05__UART6_RX		MX6SX_PAD_CSI_DATA05__UART6_DTE_RX
-#define MX6SX_PAD_CSI_DATA05__UART6_TX		MX6SX_PAD_CSI_DATA05__UART6_DCE_TX
-#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B	MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS
-#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B	MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS
-#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B	MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS
-#define MX6SX_PAD_CSI_MCLK__UART4_RX		MX6SX_PAD_CSI_MCLK__UART4_DCE_RX
-#define MX6SX_PAD_CSI_MCLK__UART4_TX		MX6SX_PAD_CSI_MCLK__UART4_DTE_TX
-#define MX6SX_PAD_CSI_PIXCLK__UART4_RX		MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX
-#define MX6SX_PAD_CSI_PIXCLK__UART4_TX		MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX
-#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B	MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS
-#define MX6SX_PAD_ENET2_COL__UART1_RX		MX6SX_PAD_ENET2_COL__UART1_DCE_RX
-#define MX6SX_PAD_ENET2_COL__UART1_TX		MX6SX_PAD_ENET2_COL__UART1_DTE_TX
-#define MX6SX_PAD_ENET2_CRS__UART1_RX		MX6SX_PAD_ENET2_CRS__UART1_DTE_RX
-#define MX6SX_PAD_ENET2_CRS__UART1_TX		MX6SX_PAD_ENET2_CRS__UART1_DCE_TX
-#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B	MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS
-#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B	MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS
-#define MX6SX_PAD_KEY_COL0__UART6_RTS_B		MX6SX_PAD_KEY_COL0__UART6_DCE_RTS
-#define MX6SX_PAD_KEY_COL1__UART6_RX		MX6SX_PAD_KEY_COL1__UART6_DTE_RX
-#define MX6SX_PAD_KEY_COL1__UART6_TX		MX6SX_PAD_KEY_COL1__UART6_DCE_TX
-#define MX6SX_PAD_KEY_COL2__UART5_RTS_B		MX6SX_PAD_KEY_COL2__UART5_DCE_RTS
-#define MX6SX_PAD_KEY_COL3__UART5_RX		MX6SX_PAD_KEY_COL3__UART5_DTE_RX
-#define MX6SX_PAD_KEY_COL3__UART5_TX		MX6SX_PAD_KEY_COL3__UART5_DCE_TX
-#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B		MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS
-#define MX6SX_PAD_KEY_ROW1__UART6_RX		MX6SX_PAD_KEY_ROW1__UART6_DCE_RX
-#define MX6SX_PAD_KEY_ROW1__UART6_TX		MX6SX_PAD_KEY_ROW1__UART6_DTE_TX
-#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B		MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS
-#define MX6SX_PAD_KEY_ROW3__UART5_RX		MX6SX_PAD_KEY_ROW3__UART5_DCE_RX
-#define MX6SX_PAD_KEY_ROW3__UART5_TX		MX6SX_PAD_KEY_ROW3__UART5_DTE_TX
-#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B	MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS
-#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B	MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS
-#define MX6SX_PAD_NAND_DATA06__UART3_RX		MX6SX_PAD_NAND_DATA06__UART3_DCE_RX
-#define MX6SX_PAD_NAND_DATA06__UART3_TX		MX6SX_PAD_NAND_DATA06__UART3_DTE_TX
-#define MX6SX_PAD_NAND_DATA07__UART3_RX		MX6SX_PAD_NAND_DATA07__UART3_DTE_RX
-#define MX6SX_PAD_NAND_DATA07__UART3_TX		MX6SX_PAD_NAND_DATA07__UART3_DCE_TX
-#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B	MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS
-#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B	MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS
-#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX		MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX
-#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX		MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX
-#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX	MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX
-#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX	MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX
-#define MX6SX_PAD_SD1_DATA0__UART2_RX		MX6SX_PAD_SD1_DATA0__UART2_DCE_RX
-#define MX6SX_PAD_SD1_DATA0__UART2_TX		MX6SX_PAD_SD1_DATA0__UART2_DTE_TX
-#define MX6SX_PAD_SD1_DATA1__UART2_RX		MX6SX_PAD_SD1_DATA1__UART2_DTE_RX
-#define MX6SX_PAD_SD1_DATA1__UART2_TX		MX6SX_PAD_SD1_DATA1__UART2_DCE_TX
-#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B	MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS
-#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B	MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS
-#define MX6SX_PAD_SD2_DATA0__UART4_RX		MX6SX_PAD_SD2_DATA0__UART4_DCE_RX
-#define MX6SX_PAD_SD2_DATA0__UART4_TX		MX6SX_PAD_SD2_DATA0__UART4_DTE_TX
-#define MX6SX_PAD_SD2_DATA1__UART4_RX		MX6SX_PAD_SD2_DATA1__UART4_DTE_RX
-#define MX6SX_PAD_SD2_DATA1__UART4_TX		MX6SX_PAD_SD2_DATA1__UART4_DCE_TX
-#define MX6SX_PAD_SD2_DATA2__UART6_RX		MX6SX_PAD_SD2_DATA2__UART6_DCE_RX
-#define MX6SX_PAD_SD2_DATA2__UART6_TX		MX6SX_PAD_SD2_DATA2__UART6_DTE_TX
-#define MX6SX_PAD_SD2_DATA3__UART6_RX		MX6SX_PAD_SD2_DATA3__UART6_DTE_RX
-#define MX6SX_PAD_SD2_DATA3__UART6_TX		MX6SX_PAD_SD2_DATA3__UART6_DCE_TX
-#define MX6SX_PAD_SD3_CLK__UART4_CTS_B		MX6SX_PAD_SD3_CLK__UART4_DCE_CTS
-#define MX6SX_PAD_SD3_CMD__UART4_RX		MX6SX_PAD_SD3_CMD__UART4_DTE_RX
-#define MX6SX_PAD_SD3_CMD__UART4_TX		MX6SX_PAD_SD3_CMD__UART4_DCE_TX
-#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B	MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS
-#define MX6SX_PAD_SD3_DATA3__UART4_RX		MX6SX_PAD_SD3_DATA3__UART4_DCE_RX
-#define MX6SX_PAD_SD3_DATA3__UART4_TX		MX6SX_PAD_SD3_DATA3__UART4_DTE_TX
-#define MX6SX_PAD_SD3_DATA4__UART3_RX		MX6SX_PAD_SD3_DATA4__UART3_DCE_RX
-#define MX6SX_PAD_SD3_DATA4__UART3_TX		MX6SX_PAD_SD3_DATA4__UART3_DTE_TX
-#define MX6SX_PAD_SD3_DATA5__UART3_RX		MX6SX_PAD_SD3_DATA5__UART3_DTE_RX
-#define MX6SX_PAD_SD3_DATA5__UART3_TX		MX6SX_PAD_SD3_DATA5__UART3_DCE_TX
-#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B	MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS
-#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B	MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS
-#define MX6SX_PAD_SD4_DATA4__UART5_RX		MX6SX_PAD_SD4_DATA4__UART5_DCE_RX
-#define MX6SX_PAD_SD4_DATA4__UART5_TX		MX6SX_PAD_SD4_DATA4__UART5_DTE_TX
-#define MX6SX_PAD_SD4_DATA5__UART5_RX		MX6SX_PAD_SD4_DATA5__UART5_DTE_RX
-#define MX6SX_PAD_SD4_DATA5__UART5_TX		MX6SX_PAD_SD4_DATA5__UART5_DCE_TX
-#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B	MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS
-#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B	MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS
-
-#endif /* __DTS_IMX6SX_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
deleted file mode 100644
index b0c27b9b02446..0000000000000
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ /dev/null
@@ -1,557 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2014 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx6sx.dtsi"
-
-/ {
-	model = "Freescale i.MX6 SoloX Sabre Auto Board";
-	compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led-user {
-			label = "debug";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	vcc_sd3: regulator-vcc-sd3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_vcc_sd3>;
-		regulator-name = "VCC_SD3";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_can_wake: regulator-can-wake {
-		compatible = "regulator-fixed";
-		regulator-name = "can-wake";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_can_en: regulator-can-en {
-		compatible = "regulator-fixed";
-		regulator-name = "can-en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_can_wake>;
-	};
-
-	reg_can_stby: regulator-can-stby {
-		compatible = "regulator-fixed";
-		regulator-name = "can-stby";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&max7310_b 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_can_en>;
-	};
-
-	reg_cs42888: cs42888_supply {
-		compatible = "regulator-fixed";
-		regulator-name = "cs42888_supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	sound-cs42888 {
-		compatible = "fsl,imx6-sabreauto-cs42888",
-			     "fsl,imx-audio-cs42888";
-		model = "imx-cs42888";
-		audio-cpu = <&esai>;
-		audio-asrc = <&asrc>;
-		audio-codec = <&cs42888>;
-		audio-routing =
-			"Line Out Jack", "AOUT1L",
-			"Line Out Jack", "AOUT1R",
-			"Line Out Jack", "AOUT2L",
-			"Line Out Jack", "AOUT2R",
-			"Line Out Jack", "AOUT3L",
-			"Line Out Jack", "AOUT3R",
-			"Line Out Jack", "AOUT4L",
-			"Line Out Jack", "AOUT4R",
-			"AIN1L", "Line In Jack",
-			"AIN1R", "Line In Jack",
-			"AIN2L", "Line In Jack",
-			"AIN2R", "Line In Jack";
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-	};
-};
-
-&anaclk2 {
-	clock-frequency = <24576000>;
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6SX_PLL4_BYPASS_SRC>,
-			  <&clks IMX6SX_PLL4_BYPASS>,
-			  <&clks IMX6SX_CLK_PLL4_POST_DIV>;
-	assigned-clock-parents = <&clks IMX6SX_CLK_LVDS2_IN>,
-				 <&clks IMX6SX_PLL4_BYPASS_SRC>;
-	assigned-clock-rates = <0>, <0>, <24576000>;
-};
-
-&esai {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esai>;
-	assigned-clocks = <&clks IMX6SX_CLK_ESAI_SEL>,
-			<&clks IMX6SX_CLK_ESAI_EXTAL>;
-	assigned-clock-parents = <&clks IMX6SX_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <0>, <24576000>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy1>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-		};
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <8>;
-	cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&vcc_sd3>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_egalax_int: egalax-intgrp {
-		fsl,pins = <
-			MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22      0x10b0
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO        0xa0b1
-			MX6SX_PAD_ENET1_MDC__ENET1_MDC          0xa0b1
-			MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC   0xa0b9
-			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0   0xa0b1
-			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1   0xa0b1
-			MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2   0xa0b1
-			MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3   0xa0b1
-			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN    0xa0b1
-			MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK      0x3081
-			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0   0x3081
-			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1   0x3081
-			MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2   0x3081
-			MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3   0x3081
-			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN    0x3081
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC   0xa0b9
-			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0   0xa0b1
-			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1   0xa0b1
-			MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2   0xa0b1
-			MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3   0xa0b1
-			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN    0xa0b1
-			MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK      0x3081
-			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0   0x3081
-			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1   0x3081
-			MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2   0x3081
-			MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3   0x3081
-			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN    0x3081
-		>;
-	};
-
-	pinctrl_esai: esaigrp {
-		fsl,pins = <
-			MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK   0x1b030
-			MX6SX_PAD_CSI_DATA01__ESAI_TX_FS    0x1b030
-			MX6SX_PAD_CSI_HSYNC__ESAI_TX0       0x1b030
-			MX6SX_PAD_CSI_DATA04__ESAI_TX1      0x1b030
-			MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3  0x1b030
-			MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2  0x1b030
-			MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK   0x1b030
-			MX6SX_PAD_CSI_DATA03__ESAI_RX_FS    0x1b030
-			MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0   0x1b030
-			MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1  0x1b030
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6SX_PAD_QSPI1B_DQS__CAN1_TX   0x1b020
-			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX	0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020
-			MX6SX_PAD_QSPI1A_DQS__CAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO03__I2C2_SDA          0x4001b8b1
-			MX6SX_PAD_GPIO1_IO02__I2C2_SCL          0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6SX_PAD_KEY_ROW4__I2C3_SDA            0x4001b8b1
-			MX6SX_PAD_KEY_COL4__I2C3_SCL            0x4001b8b1
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059
-		>;
-	};
-
-	pinctrl_spdif: spdifgrp {
-		fsl,pins = <
-			MX6SX_PAD_ENET2_COL__SPDIF_IN           0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX		0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
-			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
-			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
-			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
-			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
-			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
-			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
-			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
-			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
-			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
-			MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
-			MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
-		fsl,pins = <
-			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
-			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
-			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
-			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
-			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
-			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
-			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
-			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
-			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
-			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
-		fsl,pins = <
-			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
-			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
-			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
-			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
-			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
-			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
-			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
-			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
-			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
-			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
-			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
-			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
-			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
-			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
-			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
-			MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
-			MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
-		>;
-	};
-
-	pinctrl_vcc_sd3: vccsd3grp {
-		fsl,pins = <
-			MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY	0x30b0
-		>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	cs42888: cs42888@48 {
-		compatible = "cirrus,cs42888";
-		reg = <0x48>;
-		clocks = <&anaclk2 0>;
-		clock-names = "mclk";
-		VA-supply = <&reg_cs42888>;
-		VD-supply = <&reg_cs42888>;
-		VLS-supply = <&reg_cs42888>;
-		VLC-supply = <&reg_cs42888>;
-	};
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_egalax_int>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>;
-	};
-
-	pfuze100: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	max7322: gpio@68 {
-		compatible = "maxim,max7322";
-		reg = <0x68>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	max7310_a: gpio@30 {
-		compatible = "maxim,max7310";
-		reg = <0x30>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	max7310_b: gpio@32 {
-		compatible = "maxim,max7310";
-		reg = <0x32>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
-	assigned-clock-rates = <24576000>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
diff --git a/arch/arm/boot/dts/imx6sx-sdb-mqs.dts b/arch/arm/boot/dts/imx6sx-sdb-mqs.dts
deleted file mode 100644
index a4ab2d3e960c4..0000000000000
--- a/arch/arm/boot/dts/imx6sx-sdb-mqs.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2014 Freescale Semiconductor, Inc.
-
-#include "imx6sx-sdb.dts"
-/ {
-
-	sound {
-		status = "disabled";
-	};
-
-	sound-mqs {
-		compatible = "fsl,imx6sx-sdb-mqs",
-			     "fsl,imx-audio-mqs";
-		model = "mqs-audio";
-		audio-cpu = <&sai1>;
-		audio-asrc = <&asrc>;
-		audio-codec = <&mqs>;
-	};
-};
-
-&usdhc2 {
-	/* pin conflict with mqs*/
-	status = "disabled";
-};
-
-&mqs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mqs>;
-	clocks = <&clks IMX6SX_CLK_SAI1>;
-	clock-names = "mclk";
-	status = "okay";
-};
-
-&sai1 {
-	pinctrl-0 = <>;
-	status = "okay";
-};
-
-&ssi2 {
-	status = "disabled";
-};
-
-&sdma {
-	gpr = <&gpr>;
-	/* SDMA event remap for SAI1 */
-	fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
-};
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
deleted file mode 100644
index 7dda42553f4bc..0000000000000
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ /dev/null
@@ -1,169 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2015 Freescale Semiconductor, Inc.
-
-#include "imx6sx-sdb.dtsi"
-
-/ {
-	model = "Freescale i.MX6 SoloX SDB RevA Board";
-	compatible = "fsl,imx6sx-sdb-reva", "fsl,imx6sx";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&qspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi2>;
-	status = "okay";
-
-	flash0: flash@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl128s", "jedec,spi-nor";
-		spi-max-frequency = <66000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
-	};
-
-	flash1: flash@2 {
-		reg = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl128s", "jedec,spi-nor";
-		spi-max-frequency = <66000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
-	};
-};
-
-&reg_can_en {
-	/* Transceiver EN/STBY is active high on RevA board */
-	gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
-	enable-active-high;
-};
-
-&reg_can_stby {
-	gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
-	enable-active-high;
-	vin-supply = <&reg_can_en>;
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&vgen6_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&vgen6_reg>;
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/imx6sx-sdb-sai.dts
deleted file mode 100644
index 1c4eacd68e1bd..0000000000000
--- a/arch/arm/boot/dts/imx6sx-sdb-sai.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright (C) 2016 Freescale Semiconductor, Inc.
-
-#include "imx6sx-sdb.dts"
-
-/ {
-	sound {
-		audio-cpu = <&sai1>;
-	};
-};
-
-&audmux {
-	/* pin conflict with sai */
-	status = "disabled";
-};
-
-&sai1 {
-	status = "okay";
-};
-
-&sdma {
-	gpr = <&gpr>;
-	/* SDMA event remap for SAI1 */
-	fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
-};
-
-&ssi2 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
deleted file mode 100644
index 969cfe920d252..0000000000000
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2015 Freescale Semiconductor, Inc.
-
-#include "imx6sx-sdb.dtsi"
-
-/ {
-	model = "Freescale i.MX6 SoloX SDB RevB Board";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze200";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&qspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi2>;
-	status = "okay";
-
-	flash0: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q256a", "jedec,spi-nor";
-		spi-max-frequency = <29000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <1>;
-		reg = <0>;
-	};
-
-	flash1: flash@2 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q256a", "jedec,spi-nor";
-		spi-max-frequency = <29000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <1>;
-		reg = <2>;
-	};
-};
-
-&reg_arm {
-	vin-supply = <&sw1a_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1a_reg>;
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&vgen6_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&vgen6_reg>;
-};
-
-&reg_can_stby {
-	/* Transceiver EN/STBY is active low on RevB board */
-	gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
deleted file mode 100644
index c6e85e4a0883e..0000000000000
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ /dev/null
@@ -1,718 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2014 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6sx.dtsi"
-
-/ {
-	model = "Freescale i.MX6 SoloX SDB Board";
-	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	backlight_display: backlight-display {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	vcc_sd3: regulator-vcc-sd3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_vcc_sd3>;
-		regulator-name = "VCC_SD3";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg1>;
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg2>;
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_psu_5v: regulator-psu-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "PSU-5V0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-3v3";
-		gpio = <&gpio3 27 0>;
-		enable-active-high;
-	};
-
-	reg_peri_3v3: regulator-peri-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_peri_3v3>;
-		regulator-name = "peri_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_enet_3v3: regulator-enet-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_enet_3v3>;
-		regulator-name = "enet_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_pcie_gpio: regulator-pcie-gpio {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_reg>;
-		regulator-name = "MPCIE_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lcd_5v: regulator-lcd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_can_en: regulator-can-en {
-		compatible = "regulator-fixed";
-		regulator-name = "can-en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_can_stby: regulator-can-stby {
-		compatible = "regulator-fixed";
-		regulator-name = "can-stby";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	sound {
-		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hp>;
-		model = "wm8962-audio";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <6>;
-		hp-det-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>;
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif",
-			   "fsl,imx6sx-sdb-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-supply = <&reg_enet_3v3>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy1>;
-	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-
-		ethphy2: ethernet-phy@2 {
-			reg = <2>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy2>;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	codec: wm8962@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6SX_CLK_AUDIO>;
-		DCVDD-supply = <&vgen4_reg>;
-		DBVDD-supply = <&vgen4_reg>;
-		AVDD-supply = <&vgen4_reg>;
-		CPVDD-supply = <&vgen4_reg>;
-		MICVDD-supply = <&vgen3_reg>;
-		PLLVDD-supply = <&vgen4_reg>;
-		SPKVDD1-supply = <&reg_psu_5v>;
-		SPKVDD2-supply = <&reg_psu_5v>;
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie_gpio>;
-	status = "okay";
-};
-
-&lcdif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcd>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	status = "disabled";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
-	assigned-clock-rates = <24576000>;
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart5 { /* for bluetooth */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy1 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usbphy2 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	non-removable;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <8>;
-	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&vcc_sd3>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	imx6x-sdb {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
-				MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
-				MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
-				MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
-				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
-			>;
-		};
-
-		pinctrl_enet1: enet1grp {
-			fsl,pins = <
-				MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
-				MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1
-				MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0xa0b1
-				MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1
-				MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1
-				MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0xa0b1
-				MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0xa0b1
-				MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1
-				MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
-				MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
-				MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
-				MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
-				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
-				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
-				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
-				/* phy reset */
-				MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0x10b0
-			>;
-		};
-
-		pinctrl_enet_3v3: enet3v3grp {
-			fsl,pins = <
-				MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000
-			>;
-		};
-
-		pinctrl_enet2: enet2grp {
-			fsl,pins = <
-				MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0xa0b9
-				MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0xa0b1
-				MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0xa0b1
-				MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0xa0b1
-				MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0xa0b1
-				MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0xa0b1
-				MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
-				MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
-				MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
-				MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
-				MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
-				MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b020
-				MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b020
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b020
-				MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b020
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio_keysgrp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
-				MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
-			>;
-		};
-
-		pinctrl_hp: hpgrp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
-				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
-				MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
-				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_lcd: lcdgrp {
-			fsl,pins = <
-				MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
-				MX6SX_PAD_LCD1_CLK__LCDIF1_CLK	0x4001b0b0
-				MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
-				MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
-				MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
-				MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
-			>;
-		};
-
-		pinctrl_mqs: mqsgrp {
-			fsl,pins = <
-				MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0
-				MX6SX_PAD_SD2_CMD__MQS_LEFT  0x120b0
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
-			>;
-		};
-
-		pinctrl_pcie_reg: pciereggrp {
-			fsl,pins = <
-				MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0x10b0
-			>;
-		};
-
-		pinctrl_peri_3v3: peri3v3grp {
-			fsl,pins = <
-				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp-1 {
-			fsl,pins = <
-				MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
-			>;
-		};
-
-		pinctrl_qspi2: qspi2grp {
-			fsl,pins = <
-				MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0     0x70f1
-				MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1  0x70f1
-				MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2    0x70f1
-				MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3    0x70f1
-				MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK        0x70f1
-				MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B       0x70f1
-				MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0   0x70f1
-				MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1   0x70f1
-				MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2     0x70f1
-				MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3     0x70f1
-				MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK     0x70f1
-				MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B    0x70f1
-			>;
-		};
-
-		pinctrl_vcc_sd3: vccsd3grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
-			>;
-		};
-
-		pinctrl_sai1: sai1grp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK	0x130b0
-				MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC	0x130b0
-				MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0	0x120b0
-				MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0	0x130b0
-				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6SX_PAD_SD4_DATA4__SPDIF_OUT          0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
-				MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_ROW3__UART5_DCE_RX	0x1b0b1
-				MX6SX_PAD_KEY_COL3__UART5_DCE_TX	0x1b0b1
-				MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS	0x1b0b1
-				MX6SX_PAD_KEY_COL2__UART5_DCE_RTS	0x1b0b1
-			>;
-		};
-
-		pinctrl_usb_otg1: usbotg1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
-			>;
-		};
-
-		pinctrl_usb_otg1_id: usbotg1idgrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
-			>;
-		};
-
-		pinctrl_usb_otg2: usbot2ggrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
-				MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
-				MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
-				MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
-				MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
-				MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
-				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
-				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
-				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
-				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
-				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
-				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
-				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
-				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
-				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
deleted file mode 100644
index b9a1401e6c6d2..0000000000000
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ /dev/null
@@ -1,587 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Christoph Fritz <chf.fritz@googlemail.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6sx.dtsi"
-
-/ {
-	model = "Softing VIN|ING 2000";
-	compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb_otg1_vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg1>;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_peri_3v3: regulator-peri_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "peri_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	led-controller {
-		compatible = "pwm-leds";
-
-		led-1 {
-			label = "red";
-			max-brightness = <255>;
-			pwms = <&pwm6 0 50000>;
-		};
-
-		led-2 {
-			label = "green";
-			max-brightness = <255>;
-			pwms = <&pwm2 0 50000>;
-		};
-
-		led-3 {
-			label = "blue";
-			max-brightness = <255>;
-			pwms = <&pwm1 0 50000>;
-		};
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_peri_3v3>;
-	status = "okay";
-};
-
-&cpu0 {
-	/*
-	 * This board has a shared rail of reg_arm and reg_soc (supplied by
-	 * sw1a_reg) which is modeled below, but still this module behaves
-	 * unstable without higher voltages. Hence, set higher voltages here.
-	 */
-	operating-points = <
-		/* kHz    uV */
-		996000  1250000
-		792000  1175000
-		396000  1175000
-		198000  1175000
-		>;
-	fsl,soc-operating-points = <
-		/* ARM kHz  SOC uV */
-		996000	1250000
-		792000	1175000
-		396000	1175000
-		198000  1175000
-	>;
-};
-
-&ecspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	cs-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-supply = <&reg_peri_3v3>;
-	phy-reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <5>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet0-phy@0 {
-			reg = <0>;
-			max-speed = <100>;
-			interrupt-parent = <&gpio2>;
-			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-supply = <&reg_peri_3v3>;
-	phy-reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <5>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet1-phy@0 {
-			reg = <0>;
-			max-speed = <100>;
-			interrupt-parent = <&gpio2>;
-			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	proximity: sx9500@28 {
-		compatible = "semtech,sx9500";
-		reg = <0x28>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sx9500>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-	};
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze200";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpios>;
-
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX6SX_PAD_SD3_CLK__ECSPI4_SCLK		0x130b1
-			MX6SX_PAD_SD3_DATA3__ECSPI4_MISO	0x130b1
-			MX6SX_PAD_SD3_CMD__ECSPI4_MOSI		0x130b1
-			MX6SX_PAD_SD3_DATA2__GPIO7_IO_4		0x30b0
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x30c1
-			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x30c1
-			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0f9
-			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0f9
-			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x30c1
-			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0f9
-			MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4000a038
-			/* LAN8720 PHY Reset */
-			MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9	0x10b0
-			/* MDIO */
-			MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0f9
-			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0f9
-			/* IRQ from PHY */
-			MX6SX_PAD_KEY_ROW2__GPIO2_IO_17		0x10b0
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0x1b0b0
-			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0x1b0b0
-			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x1b0b0
-			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x1b0b0
-			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x1b0b0
-			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0x1b0b0
-			MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4000a038
-			/* LAN8720 PHY Reset */
-			MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21	0x10b0
-			/* MDIO */
-			MX6SX_PAD_ENET1_COL__ENET2_MDC		0xa0f9
-			MX6SX_PAD_ENET1_CRS__ENET2_MDIO		0xa0f9
-			/* IRQ from PHY */
-			MX6SX_PAD_KEY_ROW4__GPIO2_IO_19		0x10b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b0b0
-			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b0b0
-			MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpios: gpiosgrp {
-		fsl,pins = <
-			/* reset external uC */
-			MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19	0x10b0
-			/* IRQ from external uC */
-			MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x10b0
-			/* overcurrent detection */
-			MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8	0x10b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
-			MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6SX_PAD_NAND_ALE__I2C3_SDA		0x4001b8b1
-			MX6SX_PAD_NAND_CLE__I2C3_SCL		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6SX_PAD_NAND_DATA02__GPIO4_IO_6	0x10b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp-1 {
-		fsl,pins = <
-			/* blue LED */
-			MX6SX_PAD_RGMII2_RD3__PWM1_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp-1 {
-		fsl,pins = <
-			/* green LED */
-			MX6SX_PAD_RGMII2_RD2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm6: pwm6grp-1 {
-		fsl,pins = <
-			/* red LED */
-			MX6SX_PAD_RGMII2_TD2__PWM6_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_sx9500: sx9500grp {
-		fsl,pins = <
-			/* Reset */
-			MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x838
-			/* IRQ */
-			MX6SX_PAD_KEY_ROW1__GPIO2_IO_16		0x70e0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
-			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX	0x1b0b1
-			MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usb_otg1: usbotg1grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
-		>;
-	};
-
-	pinctrl_usb_otg1_id: usbotg1idgrp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_50mhz: usdhc2grp-50mhz {
-		fsl,pins = <
-			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
-			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
-			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
-			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
-			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
-			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
-			MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28	0x1b000
-			MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26	0x10b0
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
-		fsl,pins = <
-			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x100b9
-			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x170b9
-			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x170b9
-			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x170b9
-			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x170b9
-			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
-		fsl,pins = <
-			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x100f9
-			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x170f9
-			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x170f9
-			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x170f9
-			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x170f9
-			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_usdhc4_50mhz: usdhc4grp-50mhz {
-		fsl,pins = <
-			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
-			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
-			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
-			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
-			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
-			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
-			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x17059
-			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x17059
-			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x17059
-			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x17059
-			MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B	0x17068
-		>;
-	};
-
-	pinctrl_usdhc4_100mhz: usdhc4-100mhz {
-		fsl,pins = <
-			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100b9
-			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170b9
-			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170b9
-			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170b9
-			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170b9
-			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170b9
-			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170b9
-			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170b9
-			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170b9
-			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc4_200mhz: usdhc4-200mhz {
-		fsl,pins = <
-			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100f9
-			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170f9
-			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170f9
-			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170f9
-			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170f9
-			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170f9
-			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170f9
-			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170f9
-			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170f9
-			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170f9
-		>;
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm6 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm6>;
-	status = "okay";
-};
-
-&reg_arm {
-	vin-supply = <&sw1a_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1a_reg>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2_50mhz>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	cd-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc4 {
-	/* hs200-mode is currently unsupported because Vccq is on 3.1V, but
-	 * not on necessary 1.8V.
-	 */
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
-	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
-	bus-width = <8>;
-	keep-power-in-suspend;
-	non-removable;
-	cap-mmc-hw-reset;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
deleted file mode 100644
index 205ea26484e35..0000000000000
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Andreas Färber
- */
-
-/dts-v1/;
-
-#include "imx6sx-udoo-neo.dtsi"
-
-/ {
-	model = "UDOO Neo Basic";
-	compatible = "udoo,neobasic", "fsl,imx6sx";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&fec1 {
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
deleted file mode 100644
index 5817b49853910..0000000000000
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Andreas Färber
- */
-
-/dts-v1/;
-
-#include "imx6sx-udoo-neo.dtsi"
-
-/ {
-	model = "UDOO Neo Extended";
-	compatible = "udoo,neoextended", "fsl,imx6sx";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-};
-
-&i2c4 { /* Onboard Motion sensors */
-	status = "okay";
-};
-
-&uart3 { /* Bluetooth */
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
deleted file mode 100644
index 96f4d89848a3c..0000000000000
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Andreas Färber
- */
-
-/dts-v1/;
-
-#include "imx6sx-udoo-neo.dtsi"
-
-/ {
-	model = "UDOO Neo Full";
-	compatible = "udoo,neofull", "fsl,imx6sx";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-};
-
-&fec1 {
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-		};
-	};
-};
-
-&i2c4 { /* Onboard Motion sensors */
-	status = "okay";
-};
-
-&uart3 { /* Bluetooth */
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
deleted file mode 100644
index 725d0b5cb55f6..0000000000000
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ /dev/null
@@ -1,482 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Andreas Färber
- */
-
-#include "imx6sx.dtsi"
-
-/ {
-	compatible = "fsl,imx6sx";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-red {
-			label = "udoo-neo:red:mmc";
-			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-
-		led-orange {
-			label = "udoo-neo:orange:user";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-
-	reg_sdio_pwr: regulator-sdio-pwr {
-		compatible = "regulator-fixed";
-		gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-name = "SDIO_PWR";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_otg1_reg>;
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_otg2_reg>;
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_wlan: regulator-wlan {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-reset-duration = <10>;
-	phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pmic: pmic@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 { /* Brick snap in sensors connector */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	hdmi-transmitter@70 {
-		compatible = "nxp,tda998x";
-		reg = <0x70>;
-		interrupts-extended = <&gpio3 27 IRQ_TYPE_LEVEL_LOW>;
-
-		ports {
-			port {
-				hdmi: endpoint {
-					remote-endpoint = <&lcdc>;
-				};
-			};
-		};
-	};
-};
-
-&i2c4 { /* Onboard Motion sensors */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	clock-frequency = <100000>;
-	status = "disabled";
-};
-
-&lcdif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcd>;
-	status = "okay";
-
-	port {
-		lcdc: endpoint {
-			remote-endpoint = <&hdmi>;
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl_bt_reg: btreggrp {
-		fsl,pins =
-			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17	0x15059>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins =
-			<MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0xa0b1>,
-			<MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1>,
-			<MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1>,
-			<MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1>,
-			<MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1>,
-			<MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1>,
-
-			<MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x3081>,
-			<MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0x3081>,
-			<MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081>,
-			<MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081>,
-			<MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081>,
-			<MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER	0x3081>,
-
-			<MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1>,
-			<MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO03__I2C2_SDA		0x4001b8b1>,
-			<MX6SX_PAD_GPIO1_IO02__I2C2_SCL		0x4001b8b1>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins =
-			<MX6SX_PAD_KEY_ROW4__I2C3_SDA			0x4001b8b1>,
-			<MX6SX_PAD_KEY_COL4__I2C3_SCL			0x4001b8b1>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins =
-			<MX6SX_PAD_USB_H_DATA__I2C4_SDA		0x4001b8b1>,
-			<MX6SX_PAD_USB_H_STROBE__I2C4_SCL	0x4001b8b1>;
-	};
-
-	pinctrl_lcd: lcdgrp {
-		fsl,pins = <
-			MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22		0x4001b0b0
-			MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23		0x4001b0b0
-			MX6SX_PAD_LCD1_CLK__LCDIF1_CLK		0x4001b0b0
-			MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE		0x4001b0b0
-			MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC		0x4001b0b0
-			MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC		0x4001b0b0
-			MX6SX_PAD_LCD1_RESET__GPIO3_IO_27		0x4001b0b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
-			<MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX	0x1b0b1>,
-			<MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX	0x1b0b1>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins =
-			<MX6SX_PAD_SD3_DATA4__UART3_DCE_RX	0x13059>,
-			<MX6SX_PAD_SD3_DATA5__UART3_DCE_TX	0x13059>,
-			<MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS	0x13059>,
-			<MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS	0x13059>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins =
-			<MX6SX_PAD_SD4_DATA4__UART5_DCE_RX	0x1b0b1>,
-			<MX6SX_PAD_SD4_DATA5__UART5_DCE_TX	0x1b0b1>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins =
-			<MX6SX_PAD_CSI_DATA00__UART6_RI_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA01__UART6_DSR_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA02__UART6_DTR_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA03__UART6_DCD_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA04__UART6_DCE_RX	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA05__UART6_DCE_TX	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS	0x1b0b1>;
-	};
-
-	pinctrl_otg1_reg: otg1grp {
-		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0>;
-	};
-
-	pinctrl_otg2_reg: otg2grp {
-		fsl,pins =
-			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12	0x10b0>;
-	};
-
-	pinctrl_usb_otg1: usbotg1grp {
-		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059>,
-			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC	0x10b0>;
-	};
-
-	pinctrl_usb_otg2: usbot2ggrp {
-		fsl,pins =
-			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC	0x10b0>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins =
-			<MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059>,
-			<MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059>,
-			<MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059>,
-			<MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059>,
-			<MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059>,
-			<MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059>,
-			<MX6SX_PAD_SD1_DATA0__GPIO6_IO_2	0x17059>; /* CD */
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins =
-			<MX6SX_PAD_KEY_COL2__GPIO2_IO_12	0x15059>,
-			<MX6SX_PAD_KEY_ROW1__GPIO2_IO_16	0x13059>,
-			<MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17069>,
-			<MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17069>,
-			<MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17069>,
-			<MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17069>,
-			<MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17069>,
-			<MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10069>,
-			<MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT	0x10059>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-/* Cortex-M4 serial */
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "disabled";
-};
-
-&uart3 { /* Bluetooth - only on Extended/Full versions */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "disabled";
-
-	bluetooth {
-		compatible = "ti,wl1831-st";
-		enable-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bt_reg>;
-		max-speed = <921600>;
-	};
-};
-
-/* Arduino serial */
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "disabled";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&usbotg1 { /* J2 micro USB port */
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1>;
-	status = "okay";
-};
-
-&usbotg2 { /* J3 host USB port */
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg2>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_sdio_pwr>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&usdhc3 { /* Wi-Fi */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
-	vmmc-supply = <&reg_wlan>;
-	cap-power-off-card;
-	wakeup-source;
-	keep-power-in-suspend;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1831";
-		reg = <2>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
-		ref-clock-frequency = <38400000>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
deleted file mode 100644
index 93ac2380ca1ec..0000000000000
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ /dev/null
@@ -1,1431 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2014 Freescale Semiconductor, Inc.
-
-#include <dt-bindings/clock/imx6sx-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "imx6sx-pinfunc.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		can0 = &flexcan1;
-		can1 = &flexcan2;
-		ethernet0 = &fec1;
-		ethernet1 = &fec2;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		mmc3 = &usdhc4;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &ecspi3;
-		spi3 = &ecspi4;
-		spi4 = &ecspi5;
-		usb0 = &usbotg1;
-		usb1 = &usbotg2;
-		usb2 = &usbh;
-		usbphy0 = &usbphy1;
-		usbphy1 = &usbphy2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			operating-points = <
-				/* kHz    uV */
-				996000  1250000
-				792000  1175000
-				396000  1075000
-				198000	975000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz  SOC uV */
-				996000      1175000
-				792000      1175000
-				396000      1175000
-				198000	    1175000
-			>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			#cooling-cells = <2>;
-			clocks = <&clks IMX6SX_CLK_ARM>,
-				 <&clks IMX6SX_CLK_PLL2_PFD2>,
-				 <&clks IMX6SX_CLK_STEP>,
-				 <&clks IMX6SX_CLK_PLL1_SW>,
-				 <&clks IMX6SX_CLK_PLL1_SYS>;
-			clock-names = "arm", "pll2_pfd2_396m", "step",
-				      "pll1_sw", "pll1_sys";
-			arm-supply = <&reg_arm>;
-			soc-supply = <&reg_soc>;
-			nvmem-cells = <&cpu_speed_grade>;
-			nvmem-cell-names = "speed_grade";
-		};
-	};
-
-	ckil: clock-ckil {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "ckil";
-	};
-
-	osc: clock-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc";
-	};
-
-	ipp_di0: clock-ipp-di0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-		clock-output-names = "ipp_di0";
-	};
-
-	ipp_di1: clock-ipp-di1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-		clock-output-names = "ipp_di1";
-	};
-
-	anaclk1: clock-anaclk1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-		clock-output-names = "anaclk1";
-	};
-
-	anaclk2: clock-anaclk2 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-		clock-output-names = "anaclk2";
-	};
-
-	mqs: mqs {
-		compatible = "fsl,imx6sx-mqs";
-		gpr = <&gpr>;
-		status = "disabled";
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&gpc>;
-		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	usbphynop1: usbphynop1 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gpc>;
-		ranges;
-
-		ocram_s: sram@8f8000 {
-			compatible = "mmio-sram";
-			reg = <0x008f8000 0x4000>;
-			ranges = <0 0x008f8000 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
-		};
-
-		ocram: sram@900000 {
-			compatible = "mmio-sram";
-			reg = <0x00900000 0x20000>;
-			ranges = <0 0x00900000 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&clks IMX6SX_CLK_OCRAM>;
-		};
-
-		intc: interrupt-controller@a01000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x00a01000 0x1000>,
-			      <0x00a00100 0x100>;
-			interrupt-parent = <&intc>;
-		};
-
-		L2: cache-controller@a02000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x00a02000 0x1000>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			cache-unified;
-			cache-level = <2>;
-			arm,tag-latency = <4 2 3>;
-			arm,data-latency = <4 2 3>;
-		};
-
-		gpu: gpu@1800000 {
-			compatible = "vivante,gc";
-			reg = <0x01800000 0x4000>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6SX_CLK_GPU>,
-				 <&clks IMX6SX_CLK_GPU>,
-				 <&clks IMX6SX_CLK_GPU>;
-			clock-names = "bus", "core", "shader";
-			power-domains = <&pd_pu>;
-		};
-
-		dma_apbh: dma-apbh@1804000 {
-			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
-			reg = <0x01804000 0x2000>;
-			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			dma-channels = <4>;
-			clocks = <&clks IMX6SX_CLK_APBH_DMA>;
-		};
-
-		gpmi: nand-controller@1806000{
-			compatible = "fsl,imx6sx-gpmi-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
-			reg-names = "gpmi-nand", "bch";
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "bch";
-			clocks = <&clks IMX6SX_CLK_GPMI_IO>,
-				 <&clks IMX6SX_CLK_GPMI_APB>,
-				 <&clks IMX6SX_CLK_GPMI_BCH>,
-				 <&clks IMX6SX_CLK_GPMI_BCH_APB>,
-				 <&clks IMX6SX_CLK_PER1_BCH>;
-			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
-				      "gpmi_bch_apb", "per1_bch";
-			dmas = <&dma_apbh 0>;
-			dma-names = "rx-tx";
-			status = "disabled";
-		};
-
-		aips1: bus@2000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02000000 0x100000>;
-			ranges;
-
-			spba-bus@2000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x02000000 0x40000>;
-				ranges;
-
-				spdif: spdif@2004000 {
-					compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
-					reg = <0x02004000 0x4000>;
-					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 14 18 0>,
-					       <&sdma 15 18 0>;
-					dma-names = "rx", "tx";
-					clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>,
-						 <&clks IMX6SX_CLK_OSC>,
-						 <&clks IMX6SX_CLK_SPDIF>,
-						 <&clks 0>, <&clks 0>, <&clks 0>,
-						 <&clks IMX6SX_CLK_IPG>,
-						 <&clks 0>, <&clks 0>,
-						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "core", "rxtx0",
-						      "rxtx1", "rxtx2",
-						      "rxtx3", "rxtx4",
-						      "rxtx5", "rxtx6",
-						      "rxtx7", "spba";
-					status = "disabled";
-				};
-
-				ecspi1: spi@2008000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02008000 0x4000>;
-					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ECSPI1>,
-						 <&clks IMX6SX_CLK_ECSPI1>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi2: spi@200c000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
-					reg = <0x0200c000 0x4000>;
-					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ECSPI2>,
-						 <&clks IMX6SX_CLK_ECSPI2>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi3: spi@2010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02010000 0x4000>;
-					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ECSPI3>,
-						 <&clks IMX6SX_CLK_ECSPI3>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi4: spi@2014000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02014000 0x4000>;
-					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ECSPI4>,
-						 <&clks IMX6SX_CLK_ECSPI4>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart1: serial@2020000 {
-					compatible = "fsl,imx6sx-uart",
-						     "fsl,imx6q-uart", "fsl,imx21-uart";
-					reg = <0x02020000 0x4000>;
-					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_UART_IPG>,
-						 <&clks IMX6SX_CLK_UART_SERIAL>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				esai: esai@2024000 {
-					compatible = "fsl,imx6sx-esai", "fsl,imx35-esai";
-					reg = <0x02024000 0x4000>;
-					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
-						 <&clks IMX6SX_CLK_ESAI_MEM>,
-						 <&clks IMX6SX_CLK_ESAI_EXTAL>,
-						 <&clks IMX6SX_CLK_ESAI_IPG>,
-						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "core", "mem", "extal",
-						      "fsys", "spba";
-					dmas = <&sdma 23 21 0>,
-					       <&sdma 24 21 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				ssi1: ssi@2028000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
-					reg = <0x02028000 0x4000>;
-					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
-						 <&clks IMX6SX_CLK_SSI1>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				ssi2: ssi@202c000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
-					reg = <0x0202c000 0x4000>;
-					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
-						 <&clks IMX6SX_CLK_SSI2>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				ssi3: ssi@2030000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
-					reg = <0x02030000 0x4000>;
-					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
-						 <&clks IMX6SX_CLK_SSI3>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				asrc: asrc@2034000 {
-					compatible = "fsl,imx6sx-asrc", "fsl,imx53-asrc";
-					reg = <0x02034000 0x4000>;
-					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ASRC_IPG>,
-						<&clks IMX6SX_CLK_ASRC_MEM>, <&clks 0>,
-						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-						<&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>,
-						<&clks IMX6SX_CLK_SPBA>;
-					clock-names = "mem", "ipg", "asrck_0",
-						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
-						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
-						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
-						"asrck_d", "asrck_e", "asrck_f", "spba";
-					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>,
-					       <&sdma 19 23 1>, <&sdma 20 23 1>,
-					       <&sdma 21 23 1>, <&sdma 22 23 1>;
-					dma-names = "rxa", "rxb", "rxc",
-						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
-					fsl,asrc-width = <16>;
-					status = "okay";
-				};
-			};
-
-			pwm1: pwm@2080000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x02080000 0x4000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM1>,
-					 <&clks IMX6SX_CLK_PWM1>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-			};
-
-			pwm2: pwm@2084000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x02084000 0x4000>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM2>,
-					 <&clks IMX6SX_CLK_PWM2>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-			};
-
-			pwm3: pwm@2088000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x02088000 0x4000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM3>,
-					 <&clks IMX6SX_CLK_PWM3>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-			};
-
-			pwm4: pwm@208c000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x0208c000 0x4000>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM4>,
-					 <&clks IMX6SX_CLK_PWM4>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-			};
-
-			flexcan1: can@2090000 {
-				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x02090000 0x4000>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
-					 <&clks IMX6SX_CLK_CAN1_SERIAL>;
-				clock-names = "ipg", "per";
-				fsl,stop-mode = <&gpr 0x10 1>;
-				status = "disabled";
-			};
-
-			flexcan2: can@2094000 {
-				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x02094000 0x4000>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
-					 <&clks IMX6SX_CLK_CAN2_SERIAL>;
-				clock-names = "ipg", "per";
-				fsl,stop-mode = <&gpr 0x10 2>;
-				status = "disabled";
-			};
-
-			gpt: timer@2098000 {
-				compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
-				reg = <0x02098000 0x4000>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_GPT_BUS>,
-					 <&clks IMX6SX_CLK_GPT_3M>;
-				clock-names = "ipg", "per";
-			};
-
-			gpio1: gpio@209c000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x0209c000 0x4000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 5 26>;
-			};
-
-			gpio2: gpio@20a0000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x020a0000 0x4000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 31 20>;
-			};
-
-			gpio3: gpio@20a4000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x020a4000 0x4000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 51 29>;
-			};
-
-			gpio4: gpio@20a8000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x020a8000 0x4000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 80 32>;
-			};
-
-			gpio5: gpio@20ac000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x020ac000 0x4000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 112 24>;
-			};
-
-			gpio6: gpio@20b0000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x020b0000 0x4000>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>;
-			};
-
-			gpio7: gpio@20b4000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x020b4000 0x4000>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
-			};
-
-			kpp: keypad@20b8000 {
-				compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
-				reg = <0x020b8000 0x4000>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_IPG>;
-				status = "disabled";
-			};
-
-			wdog1: watchdog@20bc000 {
-				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
-				reg = <0x020bc000 0x4000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_IPG>;
-			};
-
-			wdog2: watchdog@20c0000 {
-				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
-				reg = <0x020c0000 0x4000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_IPG>;
-				status = "disabled";
-			};
-
-			clks: clock-controller@20c4000 {
-				compatible = "fsl,imx6sx-ccm";
-				reg = <0x020c4000 0x4000>;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
-				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
-			};
-
-			anatop: anatop@20c8000 {
-				compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
-					     "syscon", "simple-mfd";
-				reg = <0x020c8000 0x1000>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-
-				reg_vdd1p1: regulator-1p1 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p1";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x110>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <4>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1375000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_vdd3p0: regulator-3p0 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x120>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2625000>;
-					anatop-max-voltage = <3400000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_vdd2p5: regulator-2p5 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd2p5";
-					regulator-min-microvolt = <2250000>;
-					regulator-max-microvolt = <2750000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x130>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2100000>;
-					anatop-max-voltage = <2875000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_arm: regulator-vddcore {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddarm";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <0>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <24>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				reg_pcie: regulator-vddpcie {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddpcie";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <9>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <26>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				reg_soc: regulator-vddsoc {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddsoc";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <18>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <28>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				tempmon: tempmon {
-					compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
-					interrupt-parent = <&gpc>;
-					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-					fsl,tempmon = <&anatop>;
-					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-					nvmem-cell-names = "calib", "temp_grade";
-					clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
-				};
-			};
-
-			usbphy1: usbphy@20c9000 {
-				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020c9000 0x1000>;
-				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USBPHY1>;
-				fsl,anatop = <&anatop>;
-			};
-
-			usbphy2: usbphy@20ca000 {
-				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020ca000 0x1000>;
-				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USBPHY2>;
-				fsl,anatop = <&anatop>;
-			};
-
-			snvs: snvs@20cc000 {
-				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-				reg = <0x020cc000 0x4000>;
-
-				snvs_rtc: snvs-rtc-lp {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap = <&snvs>;
-					offset = <0x34>;
-					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				snvs_poweroff: snvs-poweroff {
-					compatible = "syscon-poweroff";
-					regmap = <&snvs>;
-					offset = <0x38>;
-					value = <0x60>;
-					mask = <0x60>;
-					status = "disabled";
-				};
-
-				snvs_pwrkey: snvs-powerkey {
-					compatible = "fsl,sec-v4.0-pwrkey";
-					regmap = <&snvs>;
-					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-					linux,keycode = <KEY_POWER>;
-					wakeup-source;
-					status = "disabled";
-				};
-			};
-
-			epit1: epit@20d0000 {
-				reg = <0x020d0000 0x4000>;
-				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			epit2: epit@20d4000 {
-				reg = <0x020d4000 0x4000>;
-				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			src: reset-controller@20d8000 {
-				compatible = "fsl,imx6sx-src", "fsl,imx51-src";
-				reg = <0x020d8000 0x4000>;
-				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
-			};
-
-			gpc: gpc@20dc000 {
-				compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
-				reg = <0x020dc000 0x4000>;
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-parent = <&intc>;
-				clocks = <&clks IMX6SX_CLK_IPG>;
-				clock-names = "ipg";
-
-				pgc {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					power-domain@0 {
-						reg = <0>;
-						#power-domain-cells = <0>;
-					};
-
-					pd_pu: power-domain@1 {
-						reg = <1>;
-						#power-domain-cells = <0>;
-						power-supply = <&reg_soc>;
-						clocks = <&clks IMX6SX_CLK_GPU>;
-					};
-
-					pd_disp: power-domain@2 {
-						reg = <2>;
-						#power-domain-cells = <0>;
-						clocks = <&clks IMX6SX_CLK_PXP_AXI>,
-							 <&clks IMX6SX_CLK_DISPLAY_AXI>,
-							 <&clks IMX6SX_CLK_LCDIF1_PIX>,
-							 <&clks IMX6SX_CLK_LCDIF_APB>,
-							 <&clks IMX6SX_CLK_LCDIF2_PIX>,
-							 <&clks IMX6SX_CLK_CSI>,
-							 <&clks IMX6SX_CLK_VADC>;
-					};
-
-					pd_pci: power-domain@3 {
-						reg = <3>;
-						#power-domain-cells = <0>;
-						power-supply = <&reg_pcie>;
-					};
-				};
-			};
-
-			iomuxc: pinctrl@20e0000 {
-				compatible = "fsl,imx6sx-iomuxc";
-				reg = <0x020e0000 0x4000>;
-			};
-
-			gpr: iomuxc-gpr@20e4000 {
-				compatible = "fsl,imx6sx-iomuxc-gpr",
-					     "fsl,imx6q-iomuxc-gpr", "syscon";
-				reg = <0x020e4000 0x4000>;
-			};
-
-			sdma: dma-controller@20ec000 {
-				compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
-				reg = <0x020ec000 0x4000>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_IPG>,
-					 <&clks IMX6SX_CLK_SDMA>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				/* imx6sx reuses imx6q sdma firmware */
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
-			};
-		};
-
-		aips2: bus@2100000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02100000 0x100000>;
-			ranges;
-
-			crypto: crypto@2100000 {
-				compatible = "fsl,sec-v4.0";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x2100000 0x10000>;
-				ranges = <0 0x2100000 0x10000>;
-				interrupt-parent = <&intc>;
-				clocks = <&clks IMX6SX_CLK_CAAM_MEM>,
-					 <&clks IMX6SX_CLK_CAAM_ACLK>,
-					 <&clks IMX6SX_CLK_CAAM_IPG>,
-					 <&clks IMX6SX_CLK_EIM_SLOW>;
-				clock-names = "mem", "aclk", "ipg", "emi_slow";
-
-				sec_jr0: jr@1000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x1000 0x1000>;
-					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				sec_jr1: jr@2000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x2000 0x1000>;
-					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-
-			usbotg1: usb@2184000 {
-				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
-				reg = <0x02184000 0x200>;
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy1>;
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbotg2: usb@2184200 {
-				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
-				reg = <0x02184200 0x200>;
-				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy2>;
-				fsl,usbmisc = <&usbmisc 1>;
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbh: usb@2184400 {
-				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
-				reg = <0x02184400 0x200>;
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USBOH3>;
-				fsl,usbphy = <&usbphynop1>;
-				fsl,usbmisc = <&usbmisc 2>;
-				phy_type = "hsic";
-				fsl,anatop = <&anatop>;
-				dr_mode = "host";
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@2184800 {
-				#index-cells = <1>;
-				compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x02184800 0x200>;
-				clocks = <&clks IMX6SX_CLK_USBOH3>;
-			};
-
-			fec1: ethernet@2188000 {
-				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
-				reg = <0x02188000 0x4000>;
-				interrupt-names = "int0", "pps";
-				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_ENET>,
-					 <&clks IMX6SX_CLK_ENET_AHB>,
-					 <&clks IMX6SX_CLK_ENET_PTP>,
-					 <&clks IMX6SX_CLK_ENET_REF>,
-					 <&clks IMX6SX_CLK_ENET_PTP>;
-				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
-				fsl,num-tx-queues = <3>;
-				fsl,num-rx-queues = <3>;
-				fsl,stop-mode = <&gpr 0x10 3>;
-				status = "disabled";
-			};
-
-			mlb: mlb@218c000 {
-				reg = <0x0218c000 0x4000>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_MLB>;
-				status = "disabled";
-			};
-
-			usdhc1: mmc@2190000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x02190000 0x4000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USDHC1>,
-					 <&clks IMX6SX_CLK_USDHC1>,
-					 <&clks IMX6SX_CLK_USDHC1>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc2: mmc@2194000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x02194000 0x4000>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USDHC2>,
-					 <&clks IMX6SX_CLK_USDHC2>,
-					 <&clks IMX6SX_CLK_USDHC2>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc3: mmc@2198000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x02198000 0x4000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USDHC3>,
-					 <&clks IMX6SX_CLK_USDHC3>,
-					 <&clks IMX6SX_CLK_USDHC3>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc4: mmc@219c000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x0219c000 0x4000>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USDHC4>,
-					 <&clks IMX6SX_CLK_USDHC4>,
-					 <&clks IMX6SX_CLK_USDHC4>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@21a0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
-				reg = <0x021a0000 0x4000>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_I2C1>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@21a4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
-				reg = <0x021a4000 0x4000>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_I2C2>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@21a8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
-				reg = <0x021a8000 0x4000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_I2C3>;
-				status = "disabled";
-			};
-
-			memory-controller@21b0000 {
-				compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
-				reg = <0x021b0000 0x4000>;
-				clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>;
-			};
-
-			fec2: ethernet@21b4000 {
-				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
-				reg = <0x021b4000 0x4000>;
-				interrupt-names = "int0", "pps";
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_ENET>,
-					 <&clks IMX6SX_CLK_ENET_AHB>,
-					 <&clks IMX6SX_CLK_ENET_PTP>,
-					 <&clks IMX6SX_CLK_ENET2_REF_125M>,
-					 <&clks IMX6SX_CLK_ENET_PTP>;
-				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
-				fsl,stop-mode = <&gpr 0x10 4>;
-				status = "disabled";
-			};
-
-			weim: weim@21b8000 {
-				#address-cells = <2>;
-				#size-cells = <1>;
-				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
-				reg = <0x021b8000 0x4000>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
-				fsl,weim-cs-gpr = <&gpr>;
-				status = "disabled";
-			};
-
-			ocotp: efuse@21bc000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,imx6sx-ocotp", "syscon";
-				reg = <0x021bc000 0x4000>;
-				clocks = <&clks IMX6SX_CLK_OCOTP>;
-
-				cpu_speed_grade: speed-grade@10 {
-					reg = <0x10 4>;
-				};
-
-				tempmon_calib: calib@38 {
-					reg = <0x38 4>;
-				};
-
-				tempmon_temp_grade: temp-grade@20 {
-					reg = <0x20 4>;
-				};
-			};
-
-			sai1: sai@21d4000 {
-				compatible = "fsl,imx6sx-sai";
-				reg = <0x021d4000 0x4000>;
-				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
-					 <&clks IMX6SX_CLK_SAI1>,
-					 <&clks 0>, <&clks 0>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "rx", "tx";
-				dmas = <&sdma 31 24 0>, <&sdma 32 24 0>;
-				status = "disabled";
-			};
-
-			audmux: audmux@21d8000 {
-				compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
-				reg = <0x021d8000 0x4000>;
-				status = "disabled";
-			};
-
-			sai2: sai@21dc000 {
-				compatible = "fsl,imx6sx-sai";
-				reg = <0x021dc000 0x4000>;
-				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
-					 <&clks IMX6SX_CLK_SAI2>,
-					 <&clks 0>, <&clks 0>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "rx", "tx";
-				dmas = <&sdma 33 24 0>, <&sdma 34 24 0>;
-				status = "disabled";
-			};
-
-			qspi1: spi@21e0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-qspi";
-				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
-				reg-names = "QuadSPI", "QuadSPI-memory";
-				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_QSPI1>,
-					 <&clks IMX6SX_CLK_QSPI1>;
-				clock-names = "qspi_en", "qspi";
-				status = "disabled";
-			};
-
-			qspi2: spi@21e4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-qspi";
-				reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
-				reg-names = "QuadSPI", "QuadSPI-memory";
-				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_QSPI2>,
-					 <&clks IMX6SX_CLK_QSPI2>;
-				clock-names = "qspi_en", "qspi";
-				status = "disabled";
-			};
-
-			uart2: serial@21e8000 {
-				compatible = "fsl,imx6sx-uart",
-					     "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021e8000 0x4000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_UART_IPG>,
-					 <&clks IMX6SX_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			uart3: serial@21ec000 {
-				compatible = "fsl,imx6sx-uart",
-					     "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021ec000 0x4000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_UART_IPG>,
-					 <&clks IMX6SX_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			uart4: serial@21f0000 {
-				compatible = "fsl,imx6sx-uart",
-					     "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f0000 0x4000>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_UART_IPG>,
-					 <&clks IMX6SX_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			uart5: serial@21f4000 {
-				compatible = "fsl,imx6sx-uart",
-					     "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f4000 0x4000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_UART_IPG>,
-					 <&clks IMX6SX_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			i2c4: i2c@21f8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
-				reg = <0x021f8000 0x4000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_I2C4>;
-				status = "disabled";
-			};
-		};
-
-		aips3: bus@2200000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02200000 0x100000>;
-			ranges;
-
-			spba-bus@2240000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x02240000 0x40000>;
-				ranges;
-
-				csi1: csi@2214000 {
-					reg = <0x02214000 0x4000>;
-					interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
-						 <&clks IMX6SX_CLK_CSI>,
-						 <&clks IMX6SX_CLK_DCIC1>;
-					clock-names = "disp-axi", "csi_mclk", "dcic";
-					status = "disabled";
-				};
-
-				pxp: pxp@2218000 {
-					compatible = "fsl,imx6sx-pxp", "fsl,imx6ull-pxp";
-					reg = <0x02218000 0x4000>;
-					interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_PXP_AXI>;
-					clock-names = "axi";
-					power-domains = <&pd_disp>;
-					status = "disabled";
-				};
-
-				csi2: csi@221c000 {
-					reg = <0x0221c000 0x4000>;
-					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
-						 <&clks IMX6SX_CLK_CSI>,
-						 <&clks IMX6SX_CLK_DCIC2>;
-					clock-names = "disp-axi", "csi_mclk", "dcic";
-					status = "disabled";
-				};
-
-				lcdif1: lcdif@2220000 {
-					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
-					reg = <0x02220000 0x4000>;
-					interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>;
-					clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
-						 <&clks IMX6SX_CLK_LCDIF_APB>,
-						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
-					clock-names = "pix", "axi", "disp_axi";
-					power-domains = <&pd_disp>;
-					status = "disabled";
-				};
-
-				lcdif2: lcdif@2224000 {
-					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
-					reg = <0x02224000 0x4000>;
-					interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>;
-					clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
-						 <&clks IMX6SX_CLK_LCDIF_APB>,
-						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
-					clock-names = "pix", "axi", "disp_axi";
-					power-domains = <&pd_disp>;
-					status = "disabled";
-				};
-
-				vadc: vadc@2228000 {
-					reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
-					reg-names = "vadc-vafe", "vadc-vdec";
-					clocks = <&clks IMX6SX_CLK_VADC>,
-						 <&clks IMX6SX_CLK_CSI>;
-					clock-names = "vadc", "csi";
-					power-domains = <&pd_disp>;
-					status = "disabled";
-				};
-			};
-
-			adc1: adc@2280000 {
-				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
-				reg = <0x02280000 0x4000>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_IPG>;
-				clock-names = "adc";
-				fsl,adck-max-frequency = <30000000>, <40000000>,
-							 <20000000>;
-				status = "disabled";
-			};
-
-			adc2: adc@2284000 {
-				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
-				reg = <0x02284000 0x4000>;
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_IPG>;
-				clock-names = "adc";
-				fsl,adck-max-frequency = <30000000>, <40000000>,
-							 <20000000>;
-				status = "disabled";
-			};
-
-			wdog3: watchdog@2288000 {
-				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
-				reg = <0x02288000 0x4000>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_IPG>;
-				status = "disabled";
-			};
-
-			ecspi5: spi@228c000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
-				reg = <0x0228c000 0x4000>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_ECSPI5>,
-					 <&clks IMX6SX_CLK_ECSPI5>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart6: serial@22a0000 {
-				compatible = "fsl,imx6sx-uart",
-					     "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x022a0000 0x4000>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_UART_IPG>,
-					 <&clks IMX6SX_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			pwm5: pwm@22a4000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x022a4000 0x4000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM5>,
-					 <&clks IMX6SX_CLK_PWM5>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-			};
-
-			pwm6: pwm@22a8000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x022a8000 0x4000>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM6>,
-					 <&clks IMX6SX_CLK_PWM6>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-			};
-
-			pwm7: pwm@22ac000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x022ac000 0x4000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM7>,
-					 <&clks IMX6SX_CLK_PWM7>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-			};
-
-			pwm8: pwm@22b0000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x022b0000 0x4000>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM8>,
-					 <&clks IMX6SX_CLK_PWM8>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-			};
-		};
-
-		pcie: pcie@8ffc000 {
-			compatible = "fsl,imx6sx-pcie";
-			reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
-			reg-names = "dbi", "config";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			bus-range = <0x00 0xff>;
-			ranges = <0x81000000 0 0          0x08f80000 0 0x00010000>, /* downstream I/O */
-				 <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
-			num-lanes = <1>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6SX_CLK_PCIE_AXI>,
-				 <&clks IMX6SX_CLK_LVDS1_OUT>,
-				 <&clks IMX6SX_CLK_PCIE_REF_125M>,
-				 <&clks IMX6SX_CLK_DISPLAY_AXI>;
-			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi";
-			power-domains = <&pd_disp>, <&pd_pci>;
-			power-domain-names = "pcie", "pcie_phy";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
deleted file mode 100644
index 2438669f149a2..0000000000000
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2015 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx6ul.dtsi"
-#include "imx6ul-14x14-evk.dtsi"
-
-/ {
-	model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
-	compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
-};
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
deleted file mode 100644
index 7275a13664135..0000000000000
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ /dev/null
@@ -1,651 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2015 Freescale Semiconductor, Inc.
-
-#include <dt-bindings/media/video-interfaces.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	backlight_display: backlight-display {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-
-	reg_sd1_vmmc: regulator-sd1-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "VSD_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_peri_3v3: regulator-peri-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_peri_3v3>;
-		regulator-name = "VPERI_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
-		/*
-		 * If you want to want to make this dynamic please
-		 * check schematics and test all affected peripherals:
-		 *
-		 * - sensors
-		 * - ethernet phy
-		 * - can
-		 * - bluetooth
-		 * - wm8960 audio codec
-		 * - ov5640 camera
-		 */
-		regulator-always-on;
-	};
-
-	reg_can_3v3: regulator-can-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
-	};
-
-	sound-wm8960 {
-		compatible = "fsl,imx-audio-wm8960";
-		model = "wm8960-audio";
-		audio-cpu = <&sai2>;
-		audio-codec = <&codec>;
-		audio-asrc = <&asrc>;
-		hp-det-gpio = <&gpio5 4 0>;
-		audio-routing =
-			"Headphone Jack", "HP_L",
-			"Headphone Jack", "HP_R",
-			"Ext Spk", "SPK_LP",
-			"Ext Spk", "SPK_LN",
-			"Ext Spk", "SPK_RP",
-			"Ext Spk", "SPK_RN",
-			"LINPUT2", "Mic Jack",
-			"LINPUT3", "Mic Jack",
-			"RINPUT1", "AMIC",
-			"RINPUT2", "AMIC",
-			"Mic Jack", "MICB",
-			"AMIC", "MICB";
-	};
-
-	spi-4 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_spi4>;
-		status = "okay";
-		gpio-sck = <&gpio5 11 0>;
-		gpio-mosi = <&gpio5 10 0>;
-		cs-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio_spi: gpio@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <1>;
-			spi-max-frequency = <100000>;
-			enable-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	panel {
-		compatible = "innolux,at043tn24";
-		backlight = <&backlight_display>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <786432000>;
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: wm8960@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-		wlf,shared-lrclk;
-		wlf,hp-cfg = <3 2 3>;
-		wlf,gpio-cfg = <1 3>;
-		clocks = <&clks IMX6UL_CLK_SAI2>;
-		clock-names = "mclk";
-	};
-
-	camera@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_camera_clock>;
-		clocks = <&clks IMX6UL_CLK_CSI>;
-		clock-names = "xclk";
-		powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>;
-
-		port {
-			ov5640_to_parallel: endpoint {
-				remote-endpoint = <&parallel_from_ov5640>;
-				bus-width = <8>;
-				data-shift = <2>; /* lines 9:2 are used */
-				hsync-active = <0>;
-				vsync-active = <0>;
-				pclk-sample = <1>;
-			};
-		};
-	};
-};
-
-&csi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_csi1>;
-	status = "okay";
-
-	port {
-		parallel_from_ov5640: endpoint {
-			remote-endpoint = <&ov5640_to_parallel>;
-			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
-		};
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	phy-supply = <&reg_peri_3v3>;
-	status = "okay";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	phy-supply = <&reg_peri_3v3>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@2 {
-			compatible = "ethernet-phy-id0022.1560";
-			reg = <2>;
-			micrel,led-mode = <1>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-
-		};
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-id0022.1560";
-			reg = <1>;
-			micrel,led-mode = <1>;
-			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can_3v3>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can_3v3>;
-	status = "okay";
-};
-
-&gpio_spi {
-	eth0-phy-hog {
-		gpio-hog;
-		gpios = <1 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "eth0-phy";
-	};
-
-	eth1-phy-hog {
-		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "eth1-phy";
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	magnetometer@e {
-		compatible = "fsl,mag3110";
-		reg = <0x0e>;
-		vdd-supply = <&reg_peri_3v3>;
-		vddio-supply = <&reg_peri_3v3>;
-	};
-};
-
-&lcdif {
-	assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi>;
-	status = "okay";
-
-	flash0: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q256a", "jedec,spi-nor";
-		spi-max-frequency = <29000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <1>;
-		reg = <0>;
-	};
-};
-
-&sai2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
-			  <&clks IMX6UL_CLK_SAI2>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <0>, <12288000>;
-	fsl,sai-mclk-direction-output;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&tsc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-	measure-delay-time = <0xffff>;
-	pre-charge-time = <0xfff>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "otg";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1>;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbphy1 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usbphy2 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_sd1_vmmc>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	no-1-8-v;
-	broken-cd;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	pinctrl_camera_clock: cameraclockgrp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
-		>;
-	};
-
-	pinctrl_csi1: csi1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
-			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
-			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
-			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
-			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
-			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
-			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
-			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
-			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
-			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
-			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp{
-		fsl,pins = <
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp{
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18  0x79
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19  0x79
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20  0x79
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21  0x79
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22  0x79
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23  0x79
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
-			/* used for lcd reset */
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
-		>;
-	};
-
-	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK	0x70a1
-			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00	0x70a1
-			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01	0x70a1
-			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02	0x70a1
-			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03	0x70a1
-			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B	0x70a1
-		>;
-	};
-
-	pinctrl_sai2: sai2grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
-			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
-			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
-			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
-			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
-			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x17059
-		>;
-	};
-
-	pinctrl_peri_3v3: peri3v3grp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO08__PWM1_OUT   0x110b0
-		>;
-	};
-
-	pinctrl_sim2: sim2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0xb808
-			MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x31
-			MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0xb808
-			MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0xb808
-			MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0xb809
-			MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x3008
-		>;
-	};
-
-	pinctrl_spi4: spi4grp {
-		fsl,pins = <
-			MX6UL_PAD_BOOT_MODE0__GPIO5_IO10	0x70a1
-			MX6UL_PAD_BOOT_MODE1__GPIO5_IO11	0x70a1
-			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x70a1
-			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x80000000
-		>;
-	};
-
-	pinctrl_tsc: tscgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0xb0
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0xb0
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0xb0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
-			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_usb_otg1: usbotg1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     	0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     	0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 	0x17059
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x17059 /* SD1 CD */
-			MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT    0x17059 /* SD1 VSELECT */
-			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
-
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts
deleted file mode 100644
index 3792679c0c904..0000000000000
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts
+++ /dev/null
@@ -1,200 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Digi International's ConnectCore6UL SBC Express board device tree source
- *
- * Copyright 2018 Digi International, Inc.
- *
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6ul.dtsi"
-#include "imx6ul-ccimx6ulsom.dtsi"
-
-/ {
-	model = "Digi International ConnectCore 6UL SBC Express.";
-	compatible = "digi,ccimx6ulsbcexpress", "digi,ccimx6ulsom",
-		     "fsl,imx6ul";
-};
-
-&adc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc1>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&ext_3v3>;
-	status = "okay";
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3_master>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			smsc,disable-energy-detect;
-			reg = <0>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	broken-cd;      /* no carrier detect line (use polling) */
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_adc1: adc1grp {
-		fsl,pins = <
-			/* GPIO1_4/ADC1_IN4 (pin 7 of the expansion header) */
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04        0xb0
-		>;
-	};
-
-	pinctrl_ecspi3_master: ecspi3grp1 {
-		fsl,pins = <
-			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
-			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
-			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
-			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0 /* Chip Select */
-		>;
-	};
-
-	pinctrl_ecspi3_slave: ecspi3grp2 {
-		fsl,pins = <
-			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
-			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
-			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
-			MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0	0x10b0 /* Chip Select */
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x40017051
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp{
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX	0x1b020
-			MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
-			MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x10b0
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b1
-			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
-			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10071
-			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
-		>;
-	};
-
-	/* General purpose pinctrl */
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			/* GPIOs BANK 3 */
-			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0xf030
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
deleted file mode 100644
index 3ec042bfccbac..0000000000000
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ /dev/null
@@ -1,428 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Digi International's ConnectCore6UL SBC Pro board device tree source
- *
- * Copyright 2018 Digi International, Inc.
- *
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6ul.dtsi"
-#include "imx6ul-ccimx6ulsom.dtsi"
-
-/ {
-	model = "Digi International ConnectCore 6UL SBC Pro.";
-	compatible = "digi,ccimx6ulsbcpro", "digi,ccimx6ulsom", "fsl,imx6ul";
-
-	lcd_backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm5 0 50000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	panel {
-		compatible = "auo,g101evn010";
-		power-supply = <&ldo4_ext>;
-		backlight = <&lcd_backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1 {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&adc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc1>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&ext_3v3>;
-	status = "okay";
-};
-
-/* CAN2 is multiplexed with UART2 RTS/CTS */
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&ext_3v3>;
-	status = "disabled";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_master>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <26>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			smsc,disable-energy-detect;
-			reg = <0>;
-		};
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			smsc,disable-energy-detect;
-			reg = <1>;
-		};
-	};
-};
-
-&gpio5 {
-	emmc-usd-mux-hog {
-		gpio-hog;
-		gpios = <1 GPIO_ACTIVE_LOW>;
-		output-high;
-	};
-};
-
-&i2c1 {
-	touchscreen@14 {
-		compatible = "goodix,gt911";
-		reg = <0x14>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_goodix_touch>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
-		irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat0_17
-		     &pinctrl_lcdif_clken
-		     &pinctrl_lcdif_hvsync>;
-	lcd-supply = <&ldo4_ext>;       /* BU90T82 LVDS bridge power */
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&ldo4_ext {
-	regulator-max-microvolt = <1800000>;
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&pwm5 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm5>;
-	status = "okay";
-};
-
-&pwm6 {
-	status = "okay";
-};
-
-&pwm7 {
-	status = "okay";
-};
-
-&pwm8 {
-	status = "okay";
-};
-
-&sai2 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_sai2>;
-	pinctrl-1 = <&pinctrl_sai2_sleep>;
-	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
-			  <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>,
-			  <&clks IMX6UL_CLK_SAI2>;
-	assigned-clock-rates = <0>, <786432000>, <12288000>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	status = "okay";
-};
-
-/* UART2 RTS/CTS muxed with CAN2 */
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_4wires>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* UART3 RTS/CTS muxed with CAN 1 */
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_2wires>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "otg";
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-/* USDHC2 (microSD conflicts with eMMC) */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	no-1-8-v;
-	broken-cd;	/* no carrier detect line (use polling) */
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_adc1: adc1grp {
-		fsl,pins = <
-			/* EXP_GPIO_2 -> GPIO1_3/ADC1_IN3 */
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03        0xb0
-		>;
-	};
-
-	pinctrl_ecspi1_master: ecspi1grp1 {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x10b0
-			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x10b0
-			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x10b0
-			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x10b0
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x40017051
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x40017051
-		>;
-	};
-
-	pinctrl_enet2_mdio: mdioenet2grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp{
-		fsl,pins = <
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
-		>;
-	};
-	pinctrl_flexcan2: flexcan2grp{
-		fsl,pins = <
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
-		>;
-	};
-
-	pinctrl_goodix_touch: goodixgrp{
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1020
-		>;
-	};
-
-	pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
-		>;
-	};
-
-	pinctrl_lcdif_clken: lcdifctrlgrp1 {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x17050
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
-		>;
-	};
-
-	pinctrl_lcdif_hvsync: lcdifctrlgrp2 {
-		fsl,pins = <
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO05__PWM4_OUT          0x110b0
-		>;
-	};
-
-	pinctrl_pwm5: pwm5grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DQS__PWM5_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_sai2: sai2grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
-			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
-			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
-			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
-			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
-			/* Interrupt */
-			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x10b0
-		>;
-	};
-
-	pinctrl_sai2_sleep: sai2grp-sleep {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x3000
-			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x3000
-			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x3000
-			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x3000
-			/* Interrupt */
-			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x3000
-		>;
-	};
-
-	pinctrl_uart2_4wires: uart2grp-4wires {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
-			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
-			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3_2wires: uart3grp-2wires {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
-			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10039
-			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
-			/* Mux selector between eMMC/SD# */
-			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x79
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x17059
-			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
deleted file mode 100644
index b5781c3656d1a..0000000000000
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
+++ /dev/null
@@ -1,270 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Digi International's ConnectCore 6UL System-On-Module device tree source
- *
- * Copyright 2018 Digi International, Inc.
- *
- */
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0>; /* will be filled by U-Boot */
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		linux,cma {
-			compatible = "shared-dma-pool";
-			reusable;
-			size = <0x4000000>;
-			linux,cma-default;
-		};
-	};
-};
-
-&adc1 {
-	vref-supply = <&vdda_adc_3v3>;
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pfuze3000: pmic@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			int_3v3: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <6250>;
-				regulator-boot-on;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_arm_soc_in: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-ramp-delay = <6250>;
-				regulator-boot-on;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <925000>;
-				};
-			};
-
-			ext_3v3: sw2 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <6250>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr3: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1300000>;
-				};
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			vdd_snvs_3v3: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vrefddr: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vdda_adc_3v3: vldo1 {
-				compatible = "regulator-fixed";
-				regulator-name = "vref-adc-3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo2_ext: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vdda_wlan: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_high_in: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo3_int: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo4_ext: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vcoin_chg: vcoin {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-			};
-		};
-	};
-};
-
-/* UART1 (Bluetooth) */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* USDHC1 (Wireless) */
-&usdhc1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_wifibt_ctrl>;
-	pinctrl-1 = <&pinctrl_usdhc1_sleep &pinctrl_wifibt_ctrl_sleep>;
-	non-removable;
-	no-1-8-v;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_gpmi_nand: gpmigrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
-			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
-			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
-			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
-			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
-			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
-			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
-			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
-			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
-			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
-			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
-			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
-			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
-			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
-			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX   0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX   0x1b0b1
-			MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS    0x1b0b1
-			MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS    0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x17051
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_sleep: usdhc1grp-sleep {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__GPIO2_IO16           0x3000
-			MX6UL_PAD_SD1_CLK__GPIO2_IO17           0x3000
-			MX6UL_PAD_SD1_DATA0__GPIO2_IO18         0x3000
-			MX6UL_PAD_SD1_DATA1__GPIO2_IO19         0x3000
-			MX6UL_PAD_SD1_DATA2__GPIO2_IO20         0x3000
-			MX6UL_PAD_SD1_DATA3__GPIO2_IO21         0x3000
-		>;
-	};
-
-	pinctrl_wifibt_ctrl: wifibt-ctrl-grp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x08a0
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x08a0
-		>;
-	};
-
-	pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x3000
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x3000
-		>;
-	};
-};
-
-&reg_arm {
-	vin-supply = <&vdd_arm_soc_in>;
-	regulator-allow-bypass;
-};
-
-&reg_soc {
-	vin-supply = <&vdd_arm_soc_in>;
-	regulator-allow-bypass;
-};
diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts
deleted file mode 100644
index a0097da03f380..0000000000000
--- a/arch/arm/boot/dts/imx6ul-geam.dts
+++ /dev/null
@@ -1,447 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6ul.dtsi"
-
-/ {
-	model = "Engicam GEAM6UL Starter Kit";
-	compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x08000000>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm8 0 100000>;
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <100>;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "imx6ul-geam-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Line", "Line In",
-			"Line", "Line Out",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX6UL_CLK_SAI2>;
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-		};
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		clocks = <&clks IMX6UL_CLK_OSC>;
-		clock-names = "mclk";
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		VDDD-supply = <&reg_1p8v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <16>;
-		bus-width = <18>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <28000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <30>;
-				hback-porch = <30>;
-				hsync-len = <64>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				vsync-len = <20>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&pwm8 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm8>;
-	status = "okay";
-};
-
-&tsc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-};
-
-&sai2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	status = "okay";
-};
-
-&tsc {
-	measure-delay-time = <0x1ffff>;
-	pre-charge-time = <0x1fff>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	bus-width = <4>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0		/* ENET_nRST */
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2	0x4001b031
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
-			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
-			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0xb0b1
-			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
-			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0xb0b1
-			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0xb0b1
-			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0xb0b1
-			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0xb0b1
-			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0xb0b1
-			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0xb0b1
-			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0xb0b1
-			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0xb0b1
-			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0xb0b1
-			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0xb0b1
-			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
-		>;
-	};
-
-	pinctrl_pwm8: pwm8grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT   0x110b0
-		>;
-	};
-
-	pinctrl_tsc: tscgrp {
-		fsl,pin = <
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
-		>;
-	};
-
-	pinctrl_sai2: sai2grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
-			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x4001b031
-			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
-			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
-			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
-			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK     0x17070
-			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD     0x10070
-			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0  0x17070
-			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1  0x17070
-			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2  0x17070
-			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3  0x17070
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
deleted file mode 100644
index f2386dcb9ff2c..0000000000000
--- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2019 Armadeus Systems <support@armadeus.com>
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0>; /* will be filled by U-Boot */
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	usdhc3_pwrseq: usdhc3-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-reset-duration = <1>;
-	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
-	phy-handle = <&ethphy1>;
-	phy-supply = <&reg_3v3>;
-	status = "okay";
-
-	mdio: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-			status = "okay";
-		};
-	};
-};
-
-/* Bluetooth */
-&uart8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart8>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* eMMC */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
-
-/* WiFi */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	mmc-pwrseq = <&usdhc3_pwrseq>;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "host-wake";
-	};
-};
-
-&iomuxc {
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x130b0
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x130b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x130b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x130b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			/* INT# */
-			MX6UL_PAD_NAND_DQS__GPIO4_IO16		0x1b0b0
-			/* RST# */
-			MX6UL_PAD_NAND_DATA00__GPIO4_IO02	0x130b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
-		>;
-	};
-
-	pinctrl_uart8: uart8grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS	0x1b0b0
-			/* BT_REG_ON */
-			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x130b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
-			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17059
-			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17059
-			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA18__USDHC2_CMD	0x1b0b0
-			MX6UL_PAD_LCD_DATA19__USDHC2_CLK	0x100b0
-			MX6UL_PAD_LCD_DATA20__USDHC2_DATA0	0x1b0b0
-			MX6UL_PAD_LCD_DATA21__USDHC2_DATA1	0x1b0b0
-			MX6UL_PAD_LCD_DATA22__USDHC2_DATA2	0x1b0b0
-			MX6UL_PAD_LCD_DATA23__USDHC2_DATA3	0x1b0b0
-			/* WL_REG_ON */
-			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x130b0
-			/* WL_IRQ */
-			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
deleted file mode 100644
index 18cac19aa9b0f..0000000000000
--- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
+++ /dev/null
@@ -1,327 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2019 Armadeus Systems <support@armadeus.com>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 191000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_5v>;
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		user-button {
-			label = "User button";
-			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user-led {
-			label = "User";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_led>;
-			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_w1>;
-		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	panel: panel {
-		compatible = "armadeus,st0700-adapt";
-		power-supply = <&reg_3v3>;
-		backlight = <&backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbotg1_vbus: regulator-usbotg1vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbotg1vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usbotg2_vbus: regulator-usbotg2vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbotg2vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg2_vbus>;
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_3v3>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&ecspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif>;
-	status = "okay";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "disabled";
-};
-
-&tsc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-	measure-delay-time = <0xffff>;
-	pre-charge-time = <0xffff>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1_id>;
-	vbus-supply = <&reg_usbotg1_vbus>;
-	dr_mode = "otg";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usbotg2_vbus>;
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpios>;
-
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK	0x1b0b0
-			MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI	0x1b0b0
-			MX6UL_PAD_NAND_DATA06__ECSPI4_MISO	0x1b0b0
-			MX6UL_PAD_NAND_DATA01__GPIO4_IO03	0x1b0b0
-			MX6UL_PAD_NAND_DATA07__GPIO4_IO09	0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x0b0b0
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_gpios: gpiosgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x0b0b0
-			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x0b0b0
-			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x0b0b0
-			MX6UL_PAD_NAND_RE_B__GPIO4_IO00		0x0b0b0
-			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x0b0b0
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0b0b0
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0b0b0
-			MX6UL_PAD_NAND_WE_B__GPIO4_IO01		0x0b0b0
-		>;
-	};
-
-	pinctrl_gpio_keys: gpiokeysgrp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
-		>;
-	};
-
-	pinctrl_lcdif: lcdifgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x100b1
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x100b1
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x100b1
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x100b1
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x100b1
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x100b1
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x100b1
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x100b1
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x100b1
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x100b1
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x100b1
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x100b1
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x100b1
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x100b1
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x100b1
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x100b1
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x100b1
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x100b1
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x100b1
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x100b1
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x100b1
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x100b1
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x0b0b0
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x1b0b0
-		>;
-	};
-
-	pinctrl_tsc: tscgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01       0xb0
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02       0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03       0xb0
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04       0xb0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1_id: usbotg1idgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x1b0b0
-		>;
-	};
-
-	pinctrl_usbotg1_vbus: usbotg1vbusgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
deleted file mode 100644
index 1df3e376ae2c5..0000000000000
--- a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- */
-
-/dts-v1/;
-
-#include "imx6ul-isiot.dtsi"
-
-/ {
-	model = "Engicam Is.IoT MX6UL eMMC Starter kit";
-	compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
-};
-
-&usdhc2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
deleted file mode 100644
index 8c26d4d1a7bf6..0000000000000
--- a/arch/arm/boot/dts/imx6ul-isiot-nand.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- */
-
-/dts-v1/;
-
-#include "imx6ul-isiot.dtsi"
-
-/ {
-	model = "Engicam Is.IoT MX6UL NAND Starter kit";
-	compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
-};
-
-&gpmi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
deleted file mode 100644
index 14fc4828ba4ef..0000000000000
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ /dev/null
@@ -1,387 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6ul.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm8 0 100000>;
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <100>;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "imx6ul-isiot-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Line", "Line In",
-			"Line", "Line Out",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX6UL_CLK_SAI2>;
-		};
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "disabled";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		clocks = <&clks IMX6UL_CLK_OSC>;
-		clock-names = "mclk";
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		VDDD-supply = <&reg_1p8v>;
-	};
-
-	stmpe811: gpio-expander@44 {
-		compatible = "st,stmpe811";
-		reg = <0x44>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_stmpe>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		stmpe: touchscreen {
-			compatible = "st,stmpe-ts";
-			st,sample-time = <4>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,adc-freq = <1>;
-			st,ave-ctrl = <1>;
-			st,touch-det-delay = <2>;
-			st,settling = <2>;
-			st,fraction-z = <7>;
-			st,i-drive = <1>;
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <16>;
-		bus-width = <18>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <28000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <30>;
-				hback-porch = <30>;
-				hsync-len = <64>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				vsync-len = <20>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&pwm8 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm8>;
-	status = "okay";
-};
-
-&sai2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
-	bus-width = <8>;
-	no-1-8-v;
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC	0x1b0b0
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
-			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
-			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
-			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0xb0b1
-			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
-			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0xb0b1
-			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0xb0b1
-			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0xb0b1
-			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0xb0b1
-			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0xb0b1
-			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0xb0b1
-			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0xb0b1
-			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0xb0b1
-			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0xb0b1
-			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0xb0b1
-			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
-			MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
-		>;
-	};
-
-	pinctrl_pwm8: pwm8grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT   0x110b0
-		>;
-	};
-
-	pinctrl_sai2: sai2grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
-			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x4001b031
-			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
-			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
-			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
-		>;
-	};
-
-	pinctrl_stmpe: stmpegrp  {
-		fsl,pins = <
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK      0x17070
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD      0x10070
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0  0x17070
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1  0x17070
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2  0x17070
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3  0x17070
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4  0x17070
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5  0x17070
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6  0x17070
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7  0x17070
-			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B   0x17070
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-bl-43.dts b/arch/arm/boot/dts/imx6ul-kontron-bl-43.dts
deleted file mode 100644
index 0c643706a158b..0000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-bl-43.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include "imx6ul-kontron-bl.dts"
-
-/ {
-	model = "Kontron BL i.MX6UL 43 (N631X S 43)";
-	compatible = "kontron,bl-imx6ul-43", "kontron,bl-imx6ul",
-		     "kontron,sl-imx6ul", "fsl,imx6ul";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm7 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-};
-
-&i2c4 {
-	touchscreen@5d {
-		compatible = "goodix,gt928";
-		reg = <0x5d>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cap_touch>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-		irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
-	/* Leave status disabled because of missing display panel node */
-};
-
-&pwm7 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm7>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_cap_touch: captouchgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0 /* Touch Interrupt */
-			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0 /* Touch Reset */
-			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Touch Wake */
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
-			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
-		>;
-	};
-
-	pinctrl_pwm7: pwm7grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_VSYNC__PWM7_OUT		0x110b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi
deleted file mode 100644
index 43868311f48a5..0000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi
+++ /dev/null
@@ -1,405 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led1 {
-			label = "debug-led1";
-			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "debug-led2";
-			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "debug-led3";
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	pwm-beeper {
-		compatible = "pwm-beeper";
-		pwms = <&pwm8 0 5000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vref_adc: regulator-vref-adc {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-adc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&adc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc1>;
-	vref-supply = <&reg_vref_adc>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	eeprom@0 {
-		compatible = "anvo,anv32e61w", "atmel,at25";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		spi-cpha;
-		spi-cpol;
-		pagesize = <1>;
-		size = <8192>;
-		address-width = <16>;
-	};
-};
-
-&fec1 {
-	pinctrl-0 = <&pinctrl_enet1>;
-	/delete-node/ mdio;
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy2>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-		};
-
-		ethphy2: ethernet-phy@2 {
-			reg = <2>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-};
-
-&pwm8 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm8>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	linux,rs485-enabled-at-boot-time;
-	rs485-rx-during-tx;
-	rs485-rts-active-low;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	dr_mode = "otg";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	over-current-active-low;
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
-	voltage-ranges = <3300 3300>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
-	voltage-ranges = <3300 3300>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
-
-	pinctrl_adc1: adc1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
-			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0xb0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA07__ECSPI1_MISO	0x100b1
-			MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI	0x100b1
-			MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK	0x100b1
-			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x100b1	/* ECSPI1-CS1 */
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b009
-		>;
-	};
-
-	pinctrl_enet2_mdio: enet2mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp{
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_gpio: gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0	/* DOUT1 */
-			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* DIN1 */
-			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x1b0b0	/* DOUT2 */
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0	/* DIN2 */
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x1b0b0	/* LED H14 */
-			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0	/* LED H15 */
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0	/* LED H16 */
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
-			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001f8b0
-			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001f8b0
-		>;
-	};
-
-	pinctrl_pwm8: pwm8grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_HSYNC__PWM8_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DATA04__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_NAND_DATA05__UART2_DCE_RX	0x1b0b1
-			MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS	0x1b0b1
-			/*
-			 * mux unused RTS to make sure it doesn't cause
-			 * any interrupts when it is undefined
-			 */
-			MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
-			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
-			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1 {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x100b1	/* SD1_CD */
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-bl.dts b/arch/arm/boot/dts/imx6ul-kontron-bl.dts
deleted file mode 100644
index dadf6d3d5f521..0000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-bl.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-/dts-v1/;
-
-#include "imx6ul-kontron-sl.dtsi"
-#include "imx6ul-kontron-bl-common.dtsi"
-
-/ {
-	model = "Kontron BL i.MX6UL (N631X S)";
-	compatible = "kontron,bl-imx6ul", "kontron,sl-imx6ul", "fsl,imx6ul";
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi
deleted file mode 100644
index dcf88f6103466..0000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x10000000>;
-		device_type = "memory";
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-&fec2 {
-	phy-mode = "rmii";
-	status = "disabled";
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi>;
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		spi-max-frequency = <104000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		reg = <0>;
-	};
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_out>;
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO      0x100b1
-			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI      0x100b1
-			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK      0x100b1
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22       0x100b1
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b009
-		>;
-	};
-
-	pinctrl_enet1_mdio: enet1mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
-		>;
-	};
-
-	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
-			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
-			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
-			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
-			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
-			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
-		>;
-	};
-
-	pinctrl_reset_out: rstoutgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi b/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi
deleted file mode 100644
index 0580d043e5ae9..0000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include "imx6ul.dtsi"
-#include "imx6ul-kontron-sl-common.dtsi"
-
-/ {
-	model = "Kontron SL i.MX6UL (N631X SOM)";
-	compatible = "kontron,sl-imx6ul", "fsl,imx6ul";
-};
diff --git a/arch/arm/boot/dts/imx6ul-liteboard.dts b/arch/arm/boot/dts/imx6ul-liteboard.dts
deleted file mode 100644
index 1d863a16bcf09..0000000000000
--- a/arch/arm/boot/dts/imx6ul-liteboard.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Copyright 2016 Grinn
- *
- * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6ul-litesom.dtsi"
-
-/ {
-	model = "Grinn i.MX6UL liteBoard";
-	compatible = "grinn,imx6ul-liteboard", "grinn,imx6ul-litesom",
-		     "fsl,imx6ul";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio2 8 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&iomuxc {
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-		>;
-	};
-
-	pinctrl_usb_otg1_vbus: usb-otg1-vbus {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x79
-		>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-	};
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ul-litesom.dtsi b/arch/arm/boot/dts/imx6ul-litesom.dtsi
deleted file mode 100644
index 8d6893210842b..0000000000000
--- a/arch/arm/boot/dts/imx6ul-litesom.dtsi
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright 2016 Grinn
- *
- * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx6ul.dtsi"
-
-/ {
-	model = "Grinn i.MX6UL liteSOM";
-	compatible = "grinn,imx6ul-litesom", "fsl,imx6ul";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&iomuxc {
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK	    0x10069
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD	    0x17059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
-			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B  0x17059
-		>;
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	no-1-8-v;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	bus-width = <8>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
deleted file mode 100644
index 6ce84f92b027c..0000000000000
--- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
+++ /dev/null
@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2017 Armadeus Systems <support@armadeus.com>
-
-#include "imx6ul.dtsi"
-#include "imx6ul-imx6ull-opos6ul.dtsi"
diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
deleted file mode 100644
index 375b98d7205ae..0000000000000
--- a/arch/arm/boot/dts/imx6ul-opos6uldev.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2017 Armadeus Systems <support@armadeus.com>
-
-/dts-v1/;
-#include "imx6ul-opos6ul.dtsi"
-#include "imx6ul-imx6ull-opos6uldev.dtsi"
-
-/ {
-	model = "Armadeus Systems OPOS6UL SoM (i.MX6UL) on OPOS6ULDev board";
-	compatible = "armadeus,imx6ul-opos6uldev", "armadeus,imx6ul-opos6ul", "fsl,imx6ul";
-};
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_tamper_gpios>;
-
-	pinctrl_tamper_gpios: tampergpiosgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x0b0b0
-		>;
-	};
-
-	pinctrl_usbotg2_vbus: usbotg2vbusgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x1b0b0
-		>;
-	};
-
-	pinctrl_w1: w1grp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x0b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
deleted file mode 100644
index a3ea1b2084625..0000000000000
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ /dev/null
@@ -1,186 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2016 PHYTEC Messtechnik GmbH
- * Author: Christian Hemp <c.hemp@phytec.de>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "PHYTEC phyCORE-i.MX6 UltraLite";
-	compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	/*
-	 * Set the minimum memory size here and
-	 * let the bootloader set the real size.
-	 */
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>;
-	};
-
-	gpio_leds_som: leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioleds_som>;
-		compatible = "gpio-leds";
-
-		led-phycore-green {
-			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "disabled";
-
-	mdio: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-			micrel,led-mode = <1>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-			status = "disabled";
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	eeprom@52 {
-		compatible = "catalyst,24c32", "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	status = "disabled";
-};
-
-&wdog1 {
-	fsl,suspend-in-wait;
-};
-
-&iomuxc {
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x10010
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x10010
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x17059
-		>;
-	};
-
-	pinctrl_gpioleds_som: gpioledssomgrp {
-		fsl,pins = <MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
-			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
-			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
-			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
-			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
-			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
-			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
-			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
-			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
-			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
-			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
-			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
-			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
-			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
-			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2cgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2cgpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x4001b8b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
-		>;
-	};
-
-};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
deleted file mode 100644
index cfc744f8fcade..0000000000000
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright (C) 2020 PHYTEC Messtechnik GmbH
- * Author: Yunus Bas <y.bas@phytec.de>
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-phytec-phycore-som.dtsi"
-#include "imx6ul-phytec-segin.dtsi"
-#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
-#include "imx6ul-phytec-segin-peb-av-02.dtsi"
-
-/ {
-	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with eMMC";
-	compatible = "phytec,imx6ul-pbacd10-emmc", "phytec,imx6ul-pbacd10",
-		     "phytec,imx6ul-pcl063","fsl,imx6ul";
-};
-
-&adc1 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&ecspi3 {
-	status = "okay";
-};
-
-&ethphy1 {
-	status = "okay";
-};
-
-&ethphy2 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-};
-
-&fec2 {
-	status = "okay";
-};
-
-&i2c_rtc {
-	status = "okay";
-};
-
-&reg_can1_en {
-	status = "okay";
-};
-
-&reg_sound_1v8 {
-	status = "okay";
-};
-
-&reg_sound_3v3 {
-	status = "okay";
-};
-
-&sai2 {
-	status = "okay";
-};
-
-&sound {
-	status = "okay";
-};
-
-&tlv320 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbotg1 {
-	status = "okay";
-};
-
-&usbotg2 {
-	status = "okay";
-};
-
-&usdhc1 {
-	status = "okay";
-};
-
-&usdhc2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
deleted file mode 100644
index 607eddc5030f5..0000000000000
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2016 PHYTEC Messtechnik GmbH
- * Author: Christian Hemp <c.hemp@phytec.de>
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-phytec-phycore-som.dtsi"
-#include "imx6ul-phytec-segin.dtsi"
-#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
-#include "imx6ul-phytec-segin-peb-av-02.dtsi"
-#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi"
-
-/ {
-	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
-	compatible = "phytec,imx6ul-pbacd10-nand", "phytec,imx6ul-pbacd10",
-		     "phytec,imx6ul-pcl063", "fsl,imx6ul";
-};
-
-&adc1 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&tlv320 {
-	status = "okay";
-};
-
-&ecspi3 {
-	status = "okay";
-};
-
-&ethphy1 {
-	status = "okay";
-};
-
-&ethphy2 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-};
-
-&fec2 {
-	status = "okay";
-};
-
-&gpmi {
-	status = "okay";
-};
-
-&i2c_rtc {
-	status = "okay";
-};
-
-&reg_can1_en {
-	status = "okay";
-};
-
-&reg_sound_1v8 {
-	status = "okay";
-};
-
-&reg_sound_3v3 {
-	status = "okay";
-};
-
-&sai2 {
-	status = "okay";
-};
-
-&sound {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbotg1 {
-	status = "okay";
-};
-
-&usbotg2 {
-	status = "okay";
-};
-
-&usdhc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
deleted file mode 100644
index ec042648bd98f..0000000000000
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright (C) 2016, 2020 PHYTEC Messtechnik
- * Author: Christian Hemp <c.hemp@phytec.de>
- * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
- */
-
-/ {
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <5>;
-		power-supply = <&reg_backlight_en>;
-		pwms = <&pwm3 0 5000000 0>;
-		status = "disabled";
-	};
-
-	lcd_panel: lcd-panel {
-		compatible = "edt,etm0700g0edh6";
-		backlight = <&backlight_lcd>;
-		status = "disabled";
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcdif_parallel_out>;
-			};
-		};
-	};
-
-	reg_backlight_en: regulator-backlight-en {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight_en>;
-		regulator-name = "backlight-lcd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&i2c1 {
-	edt_ft5406: touchscreen@38 {
-		compatible = "edt,edt-ft5406";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_edt_ft5406>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-		status = "disabled";
-	};
-
-	stmpe: touchscreen@44 {
-		compatible = "st,stmpe811";
-		reg = <0x44>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_stmpe>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio5>;
-		wakeup-source;
-		status = "disabled";
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			st,sample-time = <4>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,adc-freq = <1>;
-			st,ave-ctrl = <1>;
-			st,touch-det-delay = <2>;
-			st,settling = <2>;
-			st,fraction-z = <7>;
-			st,i-drive = <1>;
-			touchscreen-inverted-x;
-			touchscreen-inverted-y;
-		};
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat>;
-	status = "disabled";
-
-	port {
-		lcdif_parallel_out: endpoint {
-			remote-endpoint = <&lcd_panel_in>;
-		};
-	};
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_edt_ft5406: edtft5406grp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0
-		>;
-	};
-
-	pinctrl_backlight_en: bachlightengrp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x1b0b0
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x59
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x59
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x59
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x59
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x59
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x59
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x59
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x59
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x59
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x59
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x59
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x59
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x59
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x59
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x59
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x59
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x59
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x59
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x59
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x59
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x59
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x59
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__PWM3_OUT	0x0b0b0
-		>;
-	};
-
-	pinctrl_stmpe: stmpegrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
deleted file mode 100644
index 2f3fd32a11679..0000000000000
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2016 PHYTEC Messtechnik
- * Author: Christian Hemp <c.hemp@phytec.de>
- */
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	gpio_keys: gpio-keys {
-		compatible = "gpio-key";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-		status = "disabled";
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	user_leds: user-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_user_leds>;
-		status = "disabled";
-
-		user-led1 {
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "on";
-		};
-
-		user-led2 {
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "on";
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl_gpio_keys: gpio_keysgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x79
-		>;
-	};
-
-	pinctrl_user_leds: user_ledsgrp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x79
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x79
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi
deleted file mode 100644
index 04477fd4b9a98..0000000000000
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2021 PHYTEC Messtechnik GmbH
- * Author: Yunus Bas <y.bas@phytec.de>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	reg_wl_en: regulator-wl-en {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan_en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wl>;
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <100>;
-		status = "disabled";
-	};
-};
-
-&iomuxc {
-	pinctrl_bt: btgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x3031	/* BT ENABLE */
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x3031	/* HOST WAKEUP */
-			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x3031	/* DEV WAKEUP */
-		>;
-	};
-
-	pinctrl_uart2_bt: uart2grp-bt {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX   0x17059
-			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX   0x17059
-			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS    0x17059
-			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS    0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_wl: usdhc2grp-wl {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA18__USDHC2_CMD    0x10051
-			MX6UL_PAD_LCD_DATA19__USDHC2_CLK    0x10061
-			MX6UL_PAD_LCD_DATA20__USDHC2_DATA0  0x10051
-			MX6UL_PAD_LCD_DATA21__USDHC2_DATA1  0x10051
-			MX6UL_PAD_LCD_DATA22__USDHC2_DATA2  0x10051
-			MX6UL_PAD_LCD_DATA23__USDHC2_DATA3  0x10051
-		>;
-	};
-
-	pinctrl_wl: wlgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x3031	/* WLAN ENABLE */
-		>;
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_bt &pinctrl_bt>;
-	uart-has-rtscts;
-	status = "disabled";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&usdhc2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2_wl>;
-	vmmc-supply = <&reg_wl_en>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	status = "disabled";
-
-	brmcf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
deleted file mode 100644
index 38ea4dcfa2281..0000000000000
--- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2016 PHYTEC Messtechnik GmbH
- * Author: Christian Hemp <c.hemp@phytec.de>
- */
-
-/ {
-	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite";
-	compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
-
-	aliases {
-		rtc0 = &i2c_rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	reg_sound_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "i2s-audio-1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		status = "disabled";
-	};
-
-	reg_sound_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "i2s-audio-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		status = "disabled";
-	};
-
-	reg_can1_en: regulator-can1 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&princtrl_flexcan1_en>;
-		regulator-name = "Can";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		status = "disabled";
-	};
-
-	reg_adc1_vref_3v3: regulator-vref-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	sound: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,widgets =
-			"Line", "Line In",
-			"Line", "Line Out",
-			"Speaker", "Speaker";
-		simple-audio-card,routing =
-			"Line Out", "LLOUT",
-			"Line Out", "RLOUT",
-			"Speaker", "SPOP",
-			"Speaker", "SPOM",
-			"LINE1L", "Line In",
-			"LINE1R", "Line In";
-		status = "disabled";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&tlv320>;
-			clocks = <&clks IMX6UL_CLK_SAI2>;
-		};
-	};
-
-};
-
-&adc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc1>;
-	vref-supply = <&reg_adc1_vref_3v3>;
-	status = "disabled";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can1_en>;
-	status = "disabled";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <786432000>;
-};
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy2>;
-	status = "disabled";
-};
-
-&i2c1 {
-	tlv320: codec@18 {
-		compatible = "ti,tlv320aic3007";
-		#sound-dai-cells = <0>;
-		reg = <0x18>;
-		AVDD-supply = <&reg_sound_3v3>;
-		IOVDD-supply = <&reg_sound_3v3>;
-		DRVDD-supply = <&reg_sound_3v3>;
-		DVDD-supply = <&reg_sound_1v8>;
-		status = "disabled";
-	};
-
-	i2c_rtc: rtc@68 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc_int>;
-		compatible = "microcrystal,rv4162";
-		reg = <0x68>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		status = "disabled";
-	};
-};
-
-&mdio {
-	ethphy2: ethernet-phy@2 {
-		reg = <2>;
-		micrel,led-mode = <1>;
-		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
-		clock-names = "rmii-ref";
-		status = "disabled";
-	};
-};
-
-&sai2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
-			<&clks IMX6UL_CLK_SAI2>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <0>, <19200000>;
-	fsl,sai-mclk-direction-output;
-	status = "disabled";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	dr_mode = "otg";
-	status = "disabled";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "disabled";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	disable-wp;
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_adc1: adc1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
-			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
-			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
-			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1 {
-		fsl,pins = <
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
-		>;
-	};
-
-	princtrl_flexcan1_en: flexcan1engrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
-		>;
-	};
-
-	pinctrl_rtc_int: rtcintgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
-		>;
-	};
-
-	pinctrl_sai2: sai2grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
-			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
-			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
-			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
-			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
-			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
-			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_usb_otg1_id: usbotg1idgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
deleted file mode 100644
index 5a74c7f68eb62..0000000000000
--- a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright 2015 Technexion Ltd.
-//
-// Author: Wig Cheng  <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-/dts-v1/;
-
-#include "imx6ul-pico.dtsi"
-/ {
-	model = "TechNexion PICO-IMX6UL and DWARF baseboard";
-	compatible = "technexion,imx6ul-pico-dwarf", "fsl,imx6ul";
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6ul-sgtl5000";
-		audio-cpu = <&sai1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-	};
-
-	sys_mclk: clock-sys-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: audio-codec@a {
-		reg = <0x0a>;
-		compatible = "fsl,sgtl5000";
-		clocks = <&sys_mclk>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	pressure-sensor@60 {
-		compatible = "fsl,mpl3115";
-		reg = <0x60>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
deleted file mode 100644
index 09f7ffa9ad8c4..0000000000000
--- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright 2015 Technexion Ltd.
-//
-// Author: Wig Cheng  <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-/dts-v1/;
-
-#include "imx6ul-pico.dtsi"
-/ {
-	model = "TechNexion PICO-IMX6UL and HOBBIT baseboard";
-	compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led {
-			label = "gpio-led";
-			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6ul-sgtl5000";
-		audio-cpu = <&sai1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-	};
-
-	sys_mclk: clock-sys-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		reg = <0x0a>;
-		compatible = "fsl,sgtl5000";
-		clocks = <&sys_mclk>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-
-	polytouch: touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-	};
-
-	adc081c: adc@50 {
-		compatible = "ti,adc081c";
-		reg = <0x50>;
-		vref-supply = <&reg_3p3v>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0
-			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0
-			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x10b0
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x10b0
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x10b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-pico-pi.dts b/arch/arm/boot/dts/imx6ul-pico-pi.dts
deleted file mode 100644
index 6cd7d5877d20c..0000000000000
--- a/arch/arm/boot/dts/imx6ul-pico-pi.dts
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright 2015 Technexion Ltd.
-//
-// Author: Wig Cheng  <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-/dts-v1/;
-
-#include "imx6ul-pico.dtsi"
-/ {
-	model = "TechNexion PICO-IMX6UL and PI baseboard";
-	compatible = "technexion,imx6ul-pico-pi", "fsl,imx6ul";
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led {
-			label = "gpio-led";
-			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6ul-sgtl5000";
-		audio-cpu = <&sai1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-	};
-
-	sys_mclk: clock-sys-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		reg = <0x0a>;
-		compatible = "fsl,sgtl5000";
-		clocks = <&sys_mclk>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	polytouch: touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0
-			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0
-			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x10b0
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x10b0
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x10b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi
deleted file mode 100644
index 357ffb2f5ad61..0000000000000
--- a/arch/arm/boot/dts/imx6ul-pico.dtsi
+++ /dev/null
@@ -1,453 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright 2015 Technexion Ltd.
-//
-// Author: Wig Cheng  <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-/dts-v1/;
-
-#include "imx6ul.dtsi"
-
-/ {
-	/* Will be filled by the bootloader */
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0>;
-	};
-
-	chosen {
-		stdout-path = &uart6;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_sd1_vmmc: regulator-sd1-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "VSD_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg1>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 6 0>;
-	};
-
-	reg_brcm: regulator-brcm {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		regulator-name = "brcm_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
-	panel {
-		compatible = "vxt,vl050-8048nt-c01";
-		backlight = <&backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <786432000>;
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-	phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-			max-speed = <100>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze3000@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			/* VDD_ARM_SOC_IN*/
-			sw1b_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* DRAM */
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* DRAM */
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm7>;
-	status = "okay";
-};
-
-&pwm8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm8>;
-	status = "okay";
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	dr_mode = "otg";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc2 {  /* Wifi SDIO */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	no-1-8-v;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_brcm>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_brcm_reg: brcmreggrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DATA06__GPIO4_IO08	0x10b0	/* WL_REG_ON */
-			MX6UL_PAD_NAND_DATA04__GPIO4_IO06	0x10b0	/* WL_HOST_WAKE */
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET2_MDC	0x1b0b0
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x800
-			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x79
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
-			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__I2C1_SCL		0x4001b8b0
-			MX6UL_PAD_GPIO1_IO03__I2C1_SDA		0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__I2C3_SCL	0x4001b8b0
-			MX6UL_PAD_UART1_RX_DATA__I2C3_SDA	0x4001b8b0
-			>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
-			/* LCD reset */
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x79
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_pwm7: pwm7grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x110b0
-		>;
-	};
-
-	pinctrl_pwm8: pwm8grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_sai1: sai1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC	0x1b0b0
-			MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK	0x1b0b0
-			MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA	0x110b0
-			MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA	0x1f0b8
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b0
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b0
-			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b0
-			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b0
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX	0x1b0b1
-			MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX	0x1b0b1
-			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
-			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
-			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usb_otg1: usbotg1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x10b0
-			>;
-	};
-
-	pinctrl_usb_otg1_id: usbotg1idgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B	0x03029
-			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
-			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17059
-			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17059
-			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-pinfunc.h b/arch/arm/boot/dts/imx6ul-pinfunc.h
deleted file mode 100644
index 380d2db13a9be..0000000000000
--- a/arch/arm/boot/dts/imx6ul-pinfunc.h
+++ /dev/null
@@ -1,959 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2014 - 2015 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DTS_IMX6UL_PINFUNC_H
-#define __DTS_IMX6UL_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10		0x0014 0x02a0 0x0000 5 0
-#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11		0x0018 0x02a4 0x0000 5 0
-
-#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00		0x001c 0x02a8 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01		0x0020 0x02ac 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02		0x0024 0x02b0 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03		0x0028 0x02b4 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04		0x002c 0x02b8 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05		0x0030 0x02bc 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06		0x0034 0x02c0 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07		0x0038 0x02c4 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08		0x003c 0x02c8 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09		0x0040 0x02cc 0x0000 5 0
-
-#define MX6UL_PAD_JTAG_MOD__SJC_MOD			0x0044 0x02d0 0x0000 0 0
-#define MX6UL_PAD_JTAG_MOD__GPT2_CLK			0x0044 0x02d0 0x05a0 1 0
-#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT			0x0044 0x02d0 0x0000 2 0
-#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M		0x0044 0x02d0 0x0000 3 0
-#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY		0x0044 0x02d0 0x04c0 4 0
-#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10			0x0044 0x02d0 0x0000 5 0
-#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00		0x0044 0x02d0 0x0610 6 0
-#define MX6UL_PAD_JTAG_TMS__SJC_TMS			0x0048 0x02d4 0x0000 0 0
-#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1		0x0048 0x02d4 0x0598 1 0
-#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK			0x0048 0x02d4 0x05f0 2 0
-#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1			0x0048 0x02d4 0x0000 3 0
-#define MX6UL_PAD_JTAG_TMS__CCM_WAIT			0x0048 0x02d4 0x0000 4 0
-#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11			0x0048 0x02d4 0x0000 5 0
-#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01		0x0048 0x02d4 0x0614 6 0
-#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT			0x0048 0x02d4 0x0000 8 0
-#define MX6UL_PAD_JTAG_TDO__SJC_TDO			0x004c 0x02d8 0x0000 0 0
-#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2		0x004c 0x02d8 0x059c 1 0
-#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC		0x004c 0x02d8 0x05fc 2 0
-#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2			0x004c 0x02d8 0x0000 3 0
-#define MX6UL_PAD_JTAG_TDO__CCM_STOP			0x004c 0x02d8 0x0000 4 0
-#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12			0x004c 0x02d8 0x0000 5 0
-#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT			0x004c 0x02d8 0x0000 6 0
-#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT			0x004c 0x02d8 0x0000 8 0
-#define MX6UL_PAD_JTAG_TDI__SJC_TDI			0x0050 0x02dc 0x0000 0 0
-#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1		0x0050 0x02dc 0x0000 1 0
-#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK		0x0050 0x02dc 0x05f8 2 0
-#define MX6UL_PAD_JTAG_TDI__PWM6_OUT			0x0050 0x02dc 0x0000 4 0
-#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13			0x0050 0x02dc 0x0000 5 0
-#define MX6UL_PAD_JTAG_TDI__MQS_LEFT			0x0050 0x02dc 0x0000 6 0
-#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL		0x0050 0x02dc 0x0000 8 0
-#define MX6UL_PAD_JTAG_TCK__SJC_TCK			0x0054 0x02e0 0x0000 0 0
-#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2		0x0054 0x02e0 0x0000 1 0
-#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA		0x0054 0x02e0 0x05f4 2 0
-#define MX6UL_PAD_JTAG_TCK__PWM7_OUT			0x0054 0x02e0 0x0000 4 0
-#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14			0x0054 0x02e0 0x0000 5 0
-#define MX6UL_PAD_JTAG_TCK__OSC32K_32K_OUT			0x0054 0x02e0 0x0000 6 0
-#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL		0x0054 0x02e0 0x0000 8 0
-#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB		0x0058 0x02e4 0x0000 0 0
-#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3		0x0058 0x02e4 0x0000 1 0
-#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA		0x0058 0x02e4 0x0000 2 0
-#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT			0x0058 0x02e4 0x0000 4 0
-#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15		0x0058 0x02e4 0x0000 5 0
-#define MX6UL_PAD_JTAG_TRST_B__REF_CLK_24M		0x0058 0x02e4 0x0000 6 0
-#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS		0x0058 0x02e4 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL			0x005c 0x02e8 0x05ac 0 1
-#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1		0x005c 0x02e8 0x058c 1 0
-#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID		0x005c 0x02e8 0x04b8 2 0
-#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1		0x005c 0x02e8 0x0574 3 0
-#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT			0x005c 0x02e8 0x0000 4 0
-#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00		0x005c 0x02e8 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN	0x005c 0x02e8 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET		0x005c 0x02e8 0x0000 7 0
-#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B		0x005c 0x02e8 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA			0x0060 0x02ec 0x05b0 0 1
-#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1		0x0060 0x02ec 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC		0x0060 0x02ec 0x0664 2 0
-#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2		0x0060 0x02ec 0x057c 3 0
-#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT			0x0060 0x02ec 0x0000 4 0
-#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0x0060 0x02ec 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT	0x0060 0x02ec 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET		0x0060 0x02ec 0x0000 7 0
-#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B		0x0060 0x02ec 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL			0x0064 0x02f0 0x05a4 0 0
-#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2		0x0064 0x02f0 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR		0x0064 0x02f0 0x0000 2 0
-#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M		0x0064 0x02f0 0x0000 3 0
-#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP			0x0064 0x02f0 0x066c 4 0
-#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0x0064 0x02f0 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00		0x0064 0x02f0 0x0610 6 1
-#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET		0x0064 0x02f0 0x0000 7 0
-#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX		0x0064 0x02f0 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX		0x0064 0x02f0 0x0624 8 0
-#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA			0x0068 0x02f4 0x05a8 0 1
-#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3		0x0068 0x02f4 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC		0x0068 0x02f4 0x0660 2 0
-#define MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT		0x0068 0x02f4 0x0000 3 0
-#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B		0x0068 0x02f4 0x0668 4 0
-#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0x0068 0x02f4 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_EXT_CLK		0x0068 0x02f4 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK		0x0068 0x02f4 0x0000 7 0
-#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX		0x0068 0x02f4 0x0624 8 1
-#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX		0x0068 0x02f4 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1		0x006c 0x02f8 0x0574 0 1
-#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT			0x006c 0x02f8 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR		0x006c 0x02f8 0x0000 2 0
-#define MX6UL_PAD_GPIO1_IO04__REF_CLK_24M		0x006c 0x02f8 0x0000 3 0
-#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B		0x006c 0x02f8 0x0000 4 0
-#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0x006c 0x02f8 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN	0x006c 0x02f8 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX		0x006c 0x02f8 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX		0x006c 0x02f8 0x0644 8 2
-#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2		0x0070 0x02fc 0x057c 0 1
-#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT			0x0070 0x02fc 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID		0x0070 0x02fc 0x04bc 2 0
-#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD			0x0070 0x02fc 0x0530 3 0
-#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT		0x0070 0x02fc 0x0000 4 0
-#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05		0x0070 0x02fc 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT	0x0070 0x02fc 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX		0x0070 0x02fc 0x0644 8 3
-#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX		0x0070 0x02fc 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO		0x0074 0x0300 0x0578 0 0
-#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO		0x0074 0x0300 0x0580 1 0
-#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE		0x0074 0x0300 0x0000 2 0
-#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK			0x0074 0x0300 0x0000 3 0
-#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP			0x0074 0x0300 0x069c 4 0
-#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06		0x0074 0x0300 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT			0x0074 0x0300 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B		0x0074 0x0300 0x0000 7 0
-#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS		0x0074 0x0300 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS		0x0074 0x0300 0x0620 8 0
-#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC			0x0078 0x0304 0x0000 0 0
-#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC			0x0078 0x0304 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE		0x0078 0x0304 0x0000 2 0
-#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK		0x0078 0x0304 0x0528 3 0
-#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B		0x0078 0x0304 0x0674 4 1
-#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07		0x0078 0x0304 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO07__CCM_STOP			0x0078 0x0304 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS		0x0078 0x0304 0x0620 8 1
-#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS		0x0078 0x0304 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT			0x007c 0x0308 0x0000 0 0
-#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B		0x007c 0x0308 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT			0x007c 0x0308 0x0000 2 0
-#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC			0x007c 0x0308 0x052c 3 1
-#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT		0x007c 0x0308 0x0000 4 0
-#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08		0x007c 0x0308 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY		0x007c 0x0308 0x04c0 6 1
-#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS		0x007c 0x0308 0x0640 8 1
-#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS		0x007c 0x0308 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT			0x0080 0x030c 0x0000 0 0
-#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY		0x0080 0x030c 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN			0x0080 0x030c 0x0618 2 0
-#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC			0x0080 0x030c 0x0524 3 1
-#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B		0x0080 0x030c 0x0000 4 0
-#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09		0x0080 0x030c 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B		0x0080 0x030c 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS		0x0080 0x030c 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS		0x0080 0x030c 0x0640 8 2
-#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX		0x0084 0x0310 0x0000 0 0
-#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX		0x0084 0x0310 0x0624 0 2
-#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02		0x0084 0x0310 0x0000 1 0
-#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL		0x0084 0x0310 0x05b4 2 0
-#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02		0x0084 0x0310 0x04c4 3 1
-#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1		0x0084 0x0310 0x0000 4 0
-#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16		0x0084 0x0310 0x0000 5 0
-#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT		0x0084 0x0310 0x0000 8 0
-#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX		0x0088 0x0314 0x0624 0 3
-#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX		0x0088 0x0314 0x0000 0 0
-#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03		0x0088 0x0314 0x0000 1 0
-#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA		0x0088 0x0314 0x05b8 2 0
-#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03		0x0088 0x0314 0x04c8 3 1
-#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK		0x0088 0x0314 0x0594 4 0
-#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17		0x0088 0x0314 0x0000 5 0
-#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN		0x0088 0x0314 0x0618 8 1
-#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS		0x008c 0x0318 0x0000 0 0
-#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS		0x008c 0x0318 0x0620 0 2
-#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK		0x008c 0x0318 0x0000 1 0
-#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP		0x008c 0x0318 0x066c 2 1
-#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04		0x008c 0x0318 0x04d8 3 0
-#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN	0x008c 0x0318 0x0000 4 0
-#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18		0x008c 0x0318 0x0000 5 0
-#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP		0x008c 0x0318 0x069c 8 1
-#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS		0x0090 0x031c 0x0620 0 3
-#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS		0x0090 0x031c 0x0000 0 0
-#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER		0x0090 0x031c 0x0000 1 0
-#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B		0x0090 0x031c 0x0668 2 1
-#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05		0x0090 0x031c 0x04cc 3 1
-#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT	0x0090 0x031c 0x0000 4 0
-#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19		0x0090 0x031c 0x0000 5 0
-#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B		0x0090 0x031c 0x0674 8 2
-#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX		0x0094 0x0320 0x0000 0 0
-#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX		0x0094 0x0320 0x062c 0 0
-#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02		0x0094 0x0320 0x0000 1 0
-#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL		0x0094 0x0320 0x05bc 2 0
-#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06		0x0094 0x0320 0x04dc 3 0
-#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1		0x0094 0x0320 0x058c 4 1
-#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20		0x0094 0x0320 0x0000 5 0
-#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0		0x0094 0x0320 0x0560 8 0
-#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX		0x0098 0x0324 0x062c 0 1
-#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX		0x0098 0x0324 0x0000 0 0
-#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03		0x0098 0x0324 0x0000 1 0
-#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA		0x0098 0x0324 0x05c0 2 0
-#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07		0x0098 0x0324 0x04e0 3 0
-#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2		0x0098 0x0324 0x0590 4 0
-#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21		0x0098 0x0324 0x0000 5 0
-#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE		0x0098 0x0324 0x0000 7 0
-#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK		0x0098 0x0324 0x0554 8 0
-#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS		0x009c 0x0328 0x0000 0 0
-#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS		0x009c 0x0328 0x0628 0 0
-#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS		0x009c 0x0328 0x0000 1 0
-#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX		0x009c 0x0328 0x0000 2 0
-#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08		0x009c 0x0328 0x04e4 3 0
-#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2		0x009c 0x0328 0x0000 4 0
-#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22		0x009c 0x0328 0x0000 5 0
-#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B			0x009c 0x0328 0x0000 7 0
-#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI		0x009c 0x0328 0x055c 8 0
-#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS		0x00a0 0x032c 0x0628 0 1
-#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS		0x00a0 0x032c 0x0000 0 0
-#define MX6UL_PAD_UART2_RTS_B__ENET1_COL		0x00a0 0x032c 0x0000 1 0
-#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX		0x00a0 0x032c 0x0588 2 0
-#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09		0x00a0 0x032c 0x04e8 3 0
-#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3		0x00a0 0x032c 0x0000 4 0
-#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23		0x00a0 0x032c 0x0000 5 0
-#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL			0x00a0 0x032c 0x0000 7 0
-#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO		0x00a0 0x032c 0x0558 8 0
-#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX		0x00a4 0x0330 0x0000 0 0
-#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX		0x00a4 0x0330 0x0634 0 0
-#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02		0x00a4 0x0330 0x0000 1 0
-#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD		0x00a4 0x0330 0x0000 2 0
-#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01		0x00a4 0x0330 0x04d4 3 0
-#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS		0x00a4 0x0330 0x0000 4 0
-#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS		0x00a4 0x0330 0x0628 4 2
-#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24		0x00a4 0x0330 0x0000 5 0
-#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT		0x00a4 0x0330 0x0000 7 0
-#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID		0x00a4 0x0330 0x04b8 8 1
-#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX		0x00a8 0x0334 0x0634 0 1
-#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX		0x00a8 0x0334 0x0000 0 0
-#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03		0x00a8 0x0334 0x0000 1 0
-#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD		0x00a8 0x0334 0x0000 2 0
-#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00		0x00a8 0x0334 0x04d0 3 0
-#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS		0x00a8 0x0334 0x0628 4 3
-#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS		0x00a8 0x0334 0x0000 4 0
-#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25		0x00a8 0x0334 0x0000 5 0
-#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT		0x00a8 0x0334 0x0000 8 0
-#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS		0x00ac 0x0338 0x0000 0 0
-#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS		0x00ac 0x0338 0x0630 0 0
-#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK		0x00ac 0x0338 0x0000 1 0
-#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX		0x00ac 0x0338 0x0000 2 0
-#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10		0x00ac 0x0338 0x04ec 3 0
-#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN	0x00ac 0x0338 0x0000 4 0
-#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26		0x00ac 0x0338 0x0000 5 0
-#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT		0x00ac 0x0338 0x0000 8 0
-#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS		0x00b0 0x033c 0x0630 0 1
-#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS		0x00b0 0x033c 0x0000 0 0
-#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER		0x00b0 0x033c 0x0000 1 0
-#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX		0x00b0 0x033c 0x0584 2 0
-#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11		0x00b0 0x033c 0x04f0 3 0
-#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT	0x00b0 0x033c 0x0000 4 0
-#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27		0x00b0 0x033c 0x0000 5 0
-#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B		0x00b0 0x033c 0x0000 8 0
-#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX		0x00b4 0x0340 0x0000 0 0
-#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX		0x00b4 0x0340 0x063c 0 0
-#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02		0x00b4 0x0340 0x0000 1 0
-#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL		0x00b4 0x0340 0x05a4 2 1
-#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12		0x00b4 0x0340 0x04f4 3 0
-#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02	0x00b4 0x0340 0x0000 4 0
-#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28		0x00b4 0x0340 0x0000 5 0
-#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK		0x00b4 0x0340 0x0544 8 1
-#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX		0x00b8 0x0344 0x063c 0 1
-#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX		0x00b8 0x0344 0x0000 0 0
-#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03		0x00b8 0x0344 0x0000 1 0
-#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA		0x00b8 0x0344 0x05a8 2 2
-#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13		0x00b8 0x0344 0x04f8 3 0
-#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01	0x00b8 0x0344 0x0000 4 0
-#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29		0x00b8 0x0344 0x0000 5 0
-#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0		0x00b8 0x0344 0x0550 8 1
-#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30		0x00bc 0x0348 0x0000 5 0
-#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI		0x00bc 0x0348 0x054c 8 0
-#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX		0x00bc 0x0348 0x0000 0 0
-#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX		0x00bc 0x0348 0x0644 0 4
-#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS		0x00bc 0x0348 0x0000 1 0
-#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL		0x00bc 0x0348 0x05ac 2 2
-#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14		0x00bc 0x0348 0x04fc 3 0
-#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00	0x00bc 0x0348 0x0000 4 0
-#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX		0x00c0 0x034c 0x0644 0 5
-#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX		0x00c0 0x034c 0x0000 0 0
-#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL		0x00c0 0x034c 0x0000 1 0
-#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA		0x00c0 0x034c 0x05b0 2 2
-#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15		0x00c0 0x034c 0x0500 3 0
-#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB	0x00c0 0x034c 0x0000 4 0
-#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31		0x00c0 0x034c 0x0000 5 0
-#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO		0x00c0 0x034c 0x0548 8 1
-#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00		0x00c4 0x0350 0x0000 0 0
-#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS		0x00c4 0x0350 0x0638 1 0
-#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS		0x00c4 0x0350 0x0000 1 0
-#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT		0x00c4 0x0350 0x0000 2 0
-#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16		0x00c4 0x0350 0x0504 3 0
-#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX		0x00c4 0x0350 0x0000 4 0
-#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00		0x00c4 0x0350 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00		0x00c4 0x0350 0x05d0 6 0
-#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL		0x00c4 0x0350 0x0000 8 0
-#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01		0x00c8 0x0354 0x0000 0 0
-#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS		0x00c8 0x0354 0x0000 1 0
-#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS		0x00c8 0x0354 0x0638 1 1
-#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT		0x00c8 0x0354 0x0000 2 0
-#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17		0x00c8 0x0354 0x0508 3 0
-#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX		0x00c8 0x0354 0x0584 4 1
-#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01		0x00c8 0x0354 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00		0x00c8 0x0354 0x05c4 6 0
-#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL		0x00c8 0x0354 0x0000 8 0
-#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN		0x00cc 0x0358 0x0000 0 0
-#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS		0x00cc 0x0358 0x0640 1 3
-#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS		0x00cc 0x0358 0x0000 1 0
-#define MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT		0x00cc 0x0358 0x0000 2 0
-#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18		0x00cc 0x0358 0x050c 3 0
-#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX		0x00cc 0x0358 0x0000 4 0
-#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02		0x00cc 0x0358 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01		0x00cc 0x0358 0x05d4 6 0
-#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT		0x00cc 0x0358 0x0000 8 0
-#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00		0x00d0 0x035c 0x0000 0 0
-#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS		0x00d0 0x035c 0x0000 1 0
-#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS		0x00d0 0x035c 0x0640 1 4
-#define MX6UL_PAD_ENET1_TX_DATA0__REF_CLK_24M		0x00d0 0x035c 0x0000 2 0
-#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19		0x00d0 0x035c 0x0510 3 0
-#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX		0x00d0 0x035c 0x0588 4 1
-#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03		0x00d0 0x035c 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01		0x00d0 0x035c 0x05c8 6 0
-#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT	0x00d0 0x035c 0x0000 8 0
-#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01		0x00d4 0x0360 0x0000 0 0
-#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS		0x00d4 0x0360 0x0000 1 0
-#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS		0x00d4 0x0360 0x0648 1 2
-#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT		0x00d4 0x0360 0x0000 2 0
-#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20		0x00d4 0x0360 0x0514 3 0
-#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO		0x00d4 0x0360 0x0580 4 1
-#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04		0x00d4 0x0360 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02		0x00d4 0x0360 0x05d8 6 0
-#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB	0x00d4 0x0360 0x0000 8 0
-#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN		0x00d8 0x0364 0x0000 0 0
-#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS		0x00d8 0x0364 0x0648 1 3
-#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS		0x00d8 0x0364 0x0000 1 0
-#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT			0x00d8 0x0364 0x0000 2 0
-#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21		0x00d8 0x0364 0x0518 3 0
-#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC		0x00d8 0x0364 0x0000 4 0
-#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05		0x00d8 0x0364 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02		0x00d8 0x0364 0x05cc 6 0
-#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB	0x00d8 0x0364 0x0000 8 0
-#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK		0x00dc 0x0368 0x0000 0 0
-#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS		0x00dc 0x0368 0x0000 1 0
-#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS		0x00dc 0x0368 0x0650 1 0
-#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT		0x00dc 0x0368 0x0000 2 0
-#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22		0x00dc 0x0368 0x051c 3 0
-#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1		0x00dc 0x0368 0x0574 4 2
-#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06		0x00dc 0x0368 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03		0x00dc 0x0368 0x0000 6 0
-#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK		0x00dc 0x0368 0x0594 8 1
-#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER		0x00e0 0x036c 0x0000 0 0
-#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS		0x00e0 0x036c 0x0650 1 1
-#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS		0x00e0 0x036c 0x0000 1 0
-#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT			0x00e0 0x036c 0x0000 2 0
-#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23		0x00e0 0x036c 0x0520 3 0
-#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE			0x00e0 0x036c 0x0000 4 0
-#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07		0x00e0 0x036c 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03		0x00e0 0x036c 0x0000 6 0
-#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2		0x00e0 0x036c 0x0590 8 1
-#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00		0x00e4 0x0370 0x0000 0 0
-#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX		0x00e4 0x0370 0x0000 1 0
-#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX		0x00e4 0x0370 0x064c 1 1
-#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD	0x00e4 0x0370 0x0000 2 0
-#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL		0x00e4 0x0370 0x05b4 3 1
-#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO		0x00e4 0x0370 0x0578 4 1
-#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08		0x00e4 0x0370 0x0000 5 0
-#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04		0x00e4 0x0370 0x0000 6 0
-#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR		0x00e4 0x0370 0x0000 8 0
-#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01		0x00e8 0x0374 0x0000 0 0
-#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX		0x00e8 0x0374 0x064c 1 2
-#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX		0x00e8 0x0374 0x0000 1 0
-#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_CLK	0x00e8 0x0374 0x0000 2 0
-#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA		0x00e8 0x0374 0x05b8 3 1
-#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC		0x00e8 0x0374 0x0000 4 0
-#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09		0x00e8 0x0374 0x0000 5 0
-#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04		0x00e8 0x0374 0x0000 6 0
-#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC		0x00e8 0x0374 0x0664 8 1
-#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN		0x00ec 0x0378 0x0000 0 0
-#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX		0x00ec 0x0378 0x0000 1 0
-#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX		0x00ec 0x0378 0x0654 1 0
-#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B		0x00ec 0x0378 0x0000 2 0
-#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL			0x00ec 0x0378 0x05bc 3 1
-#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26		0x00ec 0x0378 0x0000 4 0
-#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10		0x00ec 0x0378 0x0000 5 0
-#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05		0x00ec 0x0378 0x0000 6 0
-#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M	0x00ec 0x0378 0x0000 8 0
-#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00		0x00f0 0x037c 0x0000 0 0
-#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX		0x00f0 0x037c 0x0654 1 1
-#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX		0x00f0 0x037c 0x0000 1 0
-#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN	0x00f0 0x037c 0x0000 2 0
-#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA		0x00f0 0x037c 0x05c0 3 1
-#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02		0x00f0 0x037c 0x0000 4 0
-#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11		0x00f0 0x037c 0x0000 5 0
-#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05		0x00f0 0x037c 0x0000 6 0
-#define MX6UL_PAD_ENET2_TX_DATA0__REF_CLK_24M		0x00f0 0x037c 0x0000 8 0
-#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01		0x00f4 0x0380 0x0000 0 0
-#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX		0x00f4 0x0380 0x0000 1 0
-#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX		0x00f4 0x0380 0x065c 1 0
-#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD	0x00f4 0x0380 0x0000 2 0
-#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK		0x00f4 0x0380 0x0564 3 0
-#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03		0x00f4 0x0380 0x0000 4 0
-#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12		0x00f4 0x0380 0x0000 5 0
-#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06		0x00f4 0x0380 0x0000 6 0
-#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR		0x00f4 0x0380 0x0000 8 0
-#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN		0x00f8 0x0384 0x0000 0 0
-#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX		0x00f8 0x0384 0x065c 1 1
-#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX		0x00f8 0x0384 0x0000 1 0
-#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_CLK		0x00f8 0x0384 0x0000 2 0
-#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI		0x00f8 0x0384 0x056c 3 0
-#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN		0x00f8 0x0384 0x0000 4 0
-#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13		0x00f8 0x0384 0x0000 5 0
-#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06		0x00f8 0x0384 0x0000 6 0
-#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC		0x00f8 0x0384 0x0660 8 1
-#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK		0x00fc 0x0388 0x0000 0 0
-#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS		0x00fc 0x0388 0x0000 1 0
-#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS		0x00fc 0x0388 0x0658 1 0
-#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B	0x00fc 0x0388 0x0000 2 0
-#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO		0x00fc 0x0388 0x0568 3 0
-#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2		0x00fc 0x0388 0x057c 4 2
-#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14		0x00fc 0x0388 0x0000 5 0
-#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07		0x00fc 0x0388 0x0000 6 0
-#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID		0x00fc 0x0388 0x04bc 8 1
-#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER		0x0100 0x038c 0x0000 0 0
-#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS		0x0100 0x038c 0x0658 1 1
-#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS		0x0100 0x038c 0x0000 1 0
-#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN		0x0100 0x038c 0x0000 2 0
-#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0		0x0100 0x038c 0x0570 3 0
-#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25		0x0100 0x038c 0x0000 4 0
-#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15		0x0100 0x038c 0x0000 5 0
-#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07		0x0100 0x038c 0x0000 6 0
-#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY		0x0100 0x038c 0x0000 8 0
-#define MX6UL_PAD_LCD_CLK__LCDIF_CLK			0x0104 0x0390 0x0000 0 0
-#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN			0x0104 0x0390 0x0000 1 0
-#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX			0x0104 0x0390 0x0000 2 0
-#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX			0x0104 0x0390 0x063c 2 2
-#define MX6UL_PAD_LCD_CLK__SAI3_MCLK			0x0104 0x0390 0x0600 3 0
-#define MX6UL_PAD_LCD_CLK__EIM_CS2_B			0x0104 0x0390 0x0000 4 0
-#define MX6UL_PAD_LCD_CLK__GPIO3_IO00			0x0104 0x0390 0x0000 5 0
-#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB		0x0104 0x0390 0x0000 8 0
-#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE		0x0108 0x0394 0x0000 0 0
-#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E		0x0108 0x0394 0x0000 1 0
-#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX		0x0108 0x0394 0x063c 2 3
-#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX		0x0108 0x0394 0x0000 2 0
-#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC		0x0108 0x0394 0x060c 3 0
-#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B			0x0108 0x0394 0x0000 4 0
-#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01		0x0108 0x0394 0x0000 5 0
-#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY		0x0108 0x0394 0x0000 8 0
-#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC		0x010c 0x0398 0x05dc 0 0
-#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS			0x010c 0x0398 0x0000 1 0
-#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS		0x010c 0x0398 0x0000 2 0
-#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS		0x010c 0x0398 0x0638 2 2
-#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK		0x010c 0x0398 0x0608 3 0
-#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB	0x010c 0x0398 0x0000 4 0
-#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02			0x010c 0x0398 0x0000 5 0
-#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1			0x010c 0x0398 0x0000 8 0
-#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC		0x0110 0x039c 0x0000 0 0
-#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY			0x0110 0x039c 0x05dc 1 1
-#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS		0x0110 0x039c 0x0638 2 3
-#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS		0x0110 0x039c 0x0000 2 0
-#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA		0x0110 0x039c 0x0604 3 0
-#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B		0x0110 0x039c 0x0000 4 0
-#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03			0x0110 0x039c 0x0000 5 0
-#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2			0x0110 0x039c 0x0000 8 0
-#define MX6UL_PAD_LCD_RESET__LCDIF_RESET		0x0114 0x03a0 0x0000 0 0
-#define MX6UL_PAD_LCD_RESET__LCDIF_CS			0x0114 0x03a0 0x0000 1 0
-#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI		0x0114 0x03a0 0x0000 2 0
-#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA		0x0114 0x03a0 0x0000 3 0
-#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY		0x0114 0x03a0 0x0000 4 0
-#define MX6UL_PAD_LCD_RESET__GPIO3_IO04			0x0114 0x03a0 0x0000 5 0
-#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3			0x0114 0x03a0 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00		0x0118 0x03a4 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA00__PWM1_OUT			0x0118 0x03a4 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA00__CA7_MX6UL_TRACE0		0x0118 0x03a4 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN	0x0118 0x03a4 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA00__I2C3_SDA			0x0118 0x03a4 0x05b8 4 2
-#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05		0x0118 0x03a4 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00		0x0118 0x03a4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK			0x0118 0x03a4 0x05e0 8 1
-#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01		0x011c 0x03a8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA01__PWM2_OUT			0x011c 0x03a8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA01__CA7_MX6UL_TRACE1		0x011c 0x03a8 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT	0x011c 0x03a8 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA01__I2C3_SCL			0x011c 0x03a8 0x05b4 4 2
-#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06		0x011c 0x03a8 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01		0x011c 0x03a8 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC		0x011c 0x03a8 0x05ec 8 0
-#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02		0x0120 0x03ac 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA02__PWM3_OUT			0x0120 0x03ac 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA02__CA7_MX6UL_TRACE2		0x0120 0x03ac 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN	0x0120 0x03ac 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA02__I2C4_SDA			0x0120 0x03ac 0x05c0 4 2
-#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07		0x0120 0x03ac 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02		0x0120 0x03ac 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK		0x0120 0x03ac 0x05e8 8 0
-#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03		0x0124 0x03b0 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA03__PWM4_OUT			0x0124 0x03b0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA03__CA7_MX6UL_TRACE3		0x0124 0x03b0 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT	0x0124 0x03b0 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA03__I2C4_SCL			0x0124 0x03b0 0x05bc 4 2
-#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08		0x0124 0x03b0 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03		0x0124 0x03b0 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA		0x0124 0x03b0 0x05e4 8 0
-#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04		0x0128 0x03b4 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS		0x0128 0x03b4 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS		0x0128 0x03b4 0x0658 1 2
-#define MX6UL_PAD_LCD_DATA04__CA7_MX6UL_TRACE4		0x0128 0x03b4 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN	0x0128 0x03b4 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK		0x0128 0x03b4 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09		0x0128 0x03b4 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04		0x0128 0x03b4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA		0x0128 0x03b4 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05		0x012c 0x03b8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS		0x012c 0x03b8 0x0658 1 3
-#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS		0x012c 0x03b8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA05__CA7_MX6UL_TRACE5		0x012c 0x03b8 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT	0x012c 0x03b8 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT			0x012c 0x03b8 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10		0x012c 0x03b8 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05		0x012c 0x03b8 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1		0x012c 0x03b8 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06		0x0130 0x03bc 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS		0x0130 0x03bc 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS		0x0130 0x03bc 0x0650 1 2
-#define MX6UL_PAD_LCD_DATA06__CA7_MX6UL_TRACE6		0x0130 0x03bc 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN	0x0130 0x03bc 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK		0x0130 0x03bc 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11		0x0130 0x03bc 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06		0x0130 0x03bc 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2		0x0130 0x03bc 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07		0x0134 0x03c0 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS		0x0134 0x03c0 0x0650 1 3
-#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS		0x0134 0x03c0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA07__CA7_MX6UL_TRACE7		0x0134 0x03c0 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT	0x0134 0x03c0 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK		0x0134 0x03c0 0x061c 4 0
-#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12		0x0134 0x03c0 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07		0x0134 0x03c0 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3		0x0134 0x03c0 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08		0x0138 0x03c4 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA08__SPDIF_IN			0x0138 0x03c4 0x0618 1 2
-#define MX6UL_PAD_LCD_DATA08__CA7_MX6UL_TRACE8		0x0138 0x03c4 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA08__CSI_DATA16		0x0138 0x03c4 0x0504 3 1
-#define MX6UL_PAD_LCD_DATA08__EIM_DATA00		0x0138 0x03c4 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13		0x0138 0x03c4 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08		0x0138 0x03c4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX		0x0138 0x03c4 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09		0x013c 0x03c8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK			0x013c 0x03c8 0x0600 1 1
-#define MX6UL_PAD_LCD_DATA09__CA7_MX6UL_TRACE9		0x013c 0x03c8 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA09__CSI_DATA17		0x013c 0x03c8 0x0508 3 1
-#define MX6UL_PAD_LCD_DATA09__EIM_DATA01		0x013c 0x03c8 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14		0x013c 0x03c8 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09		0x013c 0x03c8 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX		0x013c 0x03c8 0x0584 8 2
-#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10		0x0140 0x03cc 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC		0x0140 0x03cc 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA10__CA7_MX6UL_TRACE10		0x0140 0x03cc 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA10__CSI_DATA18		0x0140 0x03cc 0x050c 3 1
-#define MX6UL_PAD_LCD_DATA10__EIM_DATA02		0x0140 0x03cc 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15		0x0140 0x03cc 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10		0x0140 0x03cc 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX		0x0140 0x03cc 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11		0x0144 0x03d0 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK		0x0144 0x03d0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA11__CA7_MX6UL_TRACE11		0x0144 0x03d0 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA11__CSI_DATA19		0x0144 0x03d0 0x0510 3 1
-#define MX6UL_PAD_LCD_DATA11__EIM_DATA03		0x0144 0x03d0 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16		0x0144 0x03d0 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11		0x0144 0x03d0 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX		0x0144 0x03d0 0x0588 8 2
-#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12		0x0148 0x03d4 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC		0x0148 0x03d4 0x060c 1 1
-#define MX6UL_PAD_LCD_DATA12__CA7_MX6UL_TRACE12		0x0148 0x03d4 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA12__CSI_DATA20		0x0148 0x03d4 0x0514 3 1
-#define MX6UL_PAD_LCD_DATA12__EIM_DATA04		0x0148 0x03d4 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17		0x0148 0x03d4 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12		0x0148 0x03d4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY		0x0148 0x03d4 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13		0x014c 0x03d8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK		0x014c 0x03d8 0x0608 1 1
-#define MX6UL_PAD_LCD_DATA13__CA7_MX6UL_TRACE13		0x014c 0x03d8 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA13__CSI_DATA21		0x014c 0x03d8 0x0518 3 1
-#define MX6UL_PAD_LCD_DATA13__EIM_DATA05		0x014c 0x03d8 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18		0x014c 0x03d8 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13		0x014c 0x03d8 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B		0x014c 0x03d8 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14		0x0150 0x03dc 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA		0x0150 0x03dc 0x0604 1 1
-#define MX6UL_PAD_LCD_DATA14__CA7_MX6UL_TRACE14		0x0150 0x03dc 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA14__CSI_DATA22		0x0150 0x03dc 0x051c 3 1
-#define MX6UL_PAD_LCD_DATA14__EIM_DATA06		0x0150 0x03dc 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19		0x0150 0x03dc 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14		0x0150 0x03dc 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4		0x0150 0x03dc 0x068c 8 0
-#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15		0x0154 0x03e0 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA		0x0154 0x03e0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA15__CA7_MX6UL_TRACE15		0x0154 0x03e0 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA15__CSI_DATA23		0x0154 0x03e0 0x0520 3 1
-#define MX6UL_PAD_LCD_DATA15__EIM_DATA07		0x0154 0x03e0 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20		0x0154 0x03e0 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15		0x0154 0x03e0 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5		0x0154 0x03e0 0x0690 8 0
-#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16		0x0158 0x03e4 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX		0x0158 0x03e4 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX		0x0158 0x03e4 0x0654 1 2
-#define MX6UL_PAD_LCD_DATA16__CA7_MX6UL_TRACE_CLK	0x0158 0x03e4 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA16__CSI_DATA01		0x0158 0x03e4 0x04d4 3 1
-#define MX6UL_PAD_LCD_DATA16__EIM_DATA08		0x0158 0x03e4 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21		0x0158 0x03e4 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24		0x0158 0x03e4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6		0x0158 0x03e4 0x0694 8 0
-#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17		0x015c 0x03e8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX		0x015c 0x03e8 0x0654 1 3
-#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX		0x015c 0x03e8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA17__CA7_MX6UL_TRACE_CTL	0x015c 0x03e8 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA17__CSI_DATA00		0x015c 0x03e8 0x04d0 3 1
-#define MX6UL_PAD_LCD_DATA17__EIM_DATA09		0x015c 0x03e8 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22		0x015c 0x03e8 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25		0x015c 0x03e8 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7		0x015c 0x03e8 0x0698 8 0
-#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18		0x0160 0x03ec 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA18__PWM5_OUT			0x0160 0x03ec 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO		0x0160 0x03ec 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA18__CSI_DATA10		0x0160 0x03ec 0x04ec 3 1
-#define MX6UL_PAD_LCD_DATA18__EIM_DATA10		0x0160 0x03ec 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23		0x0160 0x03ec 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26		0x0160 0x03ec 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD		0x0160 0x03ec 0x0678 8 1
-#define MX6UL_PAD_LCD_DATA19__EIM_DATA11		0x0164 0x03f0 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24		0x0164 0x03f0 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27		0x0164 0x03f0 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK		0x0164 0x03f0 0x0670 8 1
-#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19		0x0164 0x03f0 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA19__PWM6_OUT			0x0164 0x03f0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY		0x0164 0x03f0 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA19__CSI_DATA11		0x0164 0x03f0 0x04f0 3 1
-#define MX6UL_PAD_LCD_DATA20__EIM_DATA12		0x0168 0x03f4 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25		0x0168 0x03f4 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28		0x0168 0x03f4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0		0x0168 0x03f4 0x067c 8 1
-#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20		0x0168 0x03f4 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX		0x0168 0x03f4 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX		0x0168 0x03f4 0x065c 1 2
-#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK		0x0168 0x03f4 0x0534 2 0
-#define MX6UL_PAD_LCD_DATA20__CSI_DATA12		0x0168 0x03f4 0x04f4 3 1
-#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21		0x016c 0x03f8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX		0x016c 0x03f8 0x065c 1 3
-#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX		0x016c 0x03f8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0		0x016c 0x03f8 0x0540 2 0
-#define MX6UL_PAD_LCD_DATA21__CSI_DATA13		0x016c 0x03f8 0x04f8 3 1
-#define MX6UL_PAD_LCD_DATA21__EIM_DATA13		0x016c 0x03f8 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26		0x016c 0x03f8 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29		0x016c 0x03f8 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1		0x016c 0x03f8 0x0680 8 1
-#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22		0x0170 0x03fc 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT			0x0170 0x03fc 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI		0x0170 0x03fc 0x053c 2 0
-#define MX6UL_PAD_LCD_DATA22__CSI_DATA14		0x0170 0x03fc 0x04fc 3 1
-#define MX6UL_PAD_LCD_DATA22__EIM_DATA14		0x0170 0x03fc 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27		0x0170 0x03fc 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30		0x0170 0x03fc 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2		0x0170 0x03fc 0x0684 8 0
-#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23		0x0174 0x0400 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA23__MQS_LEFT			0x0174 0x0400 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO		0x0174 0x0400 0x0538 2 0
-#define MX6UL_PAD_LCD_DATA23__CSI_DATA15		0x0174 0x0400 0x0500 3 1
-#define MX6UL_PAD_LCD_DATA23__EIM_DATA15		0x0174 0x0400 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28		0x0174 0x0400 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31		0x0174 0x0400 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3		0x0174 0x0400 0x0688 8 1
-#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B		0x0178 0x0404 0x0000 0 0
-#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK			0x0178 0x0404 0x0670 1 2
-#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK		0x0178 0x0404 0x0000 2 0
-#define MX6UL_PAD_NAND_RE_B__KPP_ROW00			0x0178 0x0404 0x05d0 3 1
-#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00			0x0178 0x0404 0x0000 4 0
-#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00			0x0178 0x0404 0x0000 5 0
-#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2			0x0178 0x0404 0x0000 8 0
-#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B		0x017c 0x0408 0x0000 0 0
-#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD			0x017c 0x0408 0x0678 1 2
-#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B		0x017c 0x0408 0x0000 2 0
-#define MX6UL_PAD_NAND_WE_B__KPP_COL00			0x017c 0x0408 0x05c4 3 1
-#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01			0x017c 0x0408 0x0000 4 0
-#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01			0x017c 0x0408 0x0000 5 0
-#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3			0x017c 0x0408 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00		0x0180 0x040c 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0		0x0180 0x040c 0x067c 1 2
-#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B		0x0180 0x040c 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA00__KPP_ROW01		0x0180 0x040c 0x05d4 3 1
-#define MX6UL_PAD_NAND_DATA00__EIM_AD08			0x0180 0x040c 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02		0x0180 0x040c 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY		0x0180 0x040c 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01		0x0184 0x0410 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1		0x0184 0x0410 0x0680 1 2
-#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS		0x0184 0x0410 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA01__KPP_COL01		0x0184 0x0410 0x05c8 3 1
-#define MX6UL_PAD_NAND_DATA01__EIM_AD09			0x0184 0x0410 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03		0x0184 0x0410 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1		0x0184 0x0410 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02		0x0188 0x0414 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2		0x0188 0x0414 0x0684 1 1
-#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00		0x0188 0x0414 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA02__KPP_ROW02		0x0188 0x0414 0x05d8 3 1
-#define MX6UL_PAD_NAND_DATA02__EIM_AD10			0x0188 0x0414 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04		0x0188 0x0414 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2		0x0188 0x0414 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03		0x018c 0x0418 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3		0x018c 0x0418 0x0688 1 2
-#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01		0x018c 0x0418 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA03__KPP_COL02		0x018c 0x0418 0x05cc 3 1
-#define MX6UL_PAD_NAND_DATA03__EIM_AD11			0x018c 0x0418 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05		0x018c 0x0418 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3		0x018c 0x0418 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04		0x0190 0x041c 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4		0x0190 0x041c 0x068c 1 1
-#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02		0x0190 0x041c 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK		0x0190 0x041c 0x0564 3 1
-#define MX6UL_PAD_NAND_DATA04__EIM_AD12			0x0190 0x041c 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06		0x0190 0x041c 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX		0x0190 0x041c 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX		0x0190 0x041c 0x062c 8 2
-#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05		0x0194 0x0420 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5		0x0194 0x0420 0x0690 1 1
-#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03		0x0194 0x0420 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI		0x0194 0x0420 0x056c 3 1
-#define MX6UL_PAD_NAND_DATA05__EIM_AD13			0x0194 0x0420 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07		0x0194 0x0420 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX		0x0194 0x0420 0x062c 8 3
-#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX		0x0194 0x0420 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06		0x0198 0x0424 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6		0x0198 0x0424 0x0694 1 1
-#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK		0x0198 0x0424 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO		0x0198 0x0424 0x0568 3 1
-#define MX6UL_PAD_NAND_DATA06__EIM_AD14			0x0198 0x0424 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08		0x0198 0x0424 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS		0x0198 0x0424 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS		0x0198 0x0424 0x0628 8 4
-#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07		0x019c 0x0428 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7		0x019c 0x0428 0x0698 1 1
-#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B		0x019c 0x0428 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0		0x019c 0x0428 0x0570 3 1
-#define MX6UL_PAD_NAND_DATA07__EIM_AD15			0x019c 0x0428 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09		0x019c 0x0428 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS		0x019c 0x0428 0x0628 8 5
-#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS		0x019c 0x0428 0x0000 8 0
-#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE			0x01a0 0x042c 0x0000 0 0
-#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B		0x01a0 0x042c 0x0000 1 0
-#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS			0x01a0 0x042c 0x0000 2 0
-#define MX6UL_PAD_NAND_ALE__PWM3_OUT			0x01a0 0x042c 0x0000 3 0
-#define MX6UL_PAD_NAND_ALE__EIM_ADDR17			0x01a0 0x042c 0x0000 4 0
-#define MX6UL_PAD_NAND_ALE__GPIO4_IO10			0x01a0 0x042c 0x0000 5 0
-#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1			0x01a0 0x042c 0x0000 8 0
-#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B		0x01a4 0x0430 0x0000 0 0
-#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B		0x01a4 0x0430 0x0000 1 0
-#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK		0x01a4 0x0430 0x0000 2 0
-#define MX6UL_PAD_NAND_WP_B__PWM4_OUT			0x01a4 0x0430 0x0000 3 0
-#define MX6UL_PAD_NAND_WP_B__EIM_BCLK			0x01a4 0x0430 0x0000 4 0
-#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11			0x01a4 0x0430 0x0000 5 0
-#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY			0x01a4 0x0430 0x0000 8 0
-#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B		0x01a8 0x0434 0x0000 0 0
-#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4		0x01a8 0x0434 0x0000 1 0
-#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00		0x01a8 0x0434 0x0000 2 0
-#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0		0x01a8 0x0434 0x0560 3 1
-#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B		0x01a8 0x0434 0x0000 4 0
-#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12		0x01a8 0x0434 0x0000 5 0
-#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX		0x01a8 0x0434 0x0000 8 0
-#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX		0x01a8 0x0434 0x0634 8 2
-#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B		0x01ac 0x0438 0x0000 0 0
-#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5		0x01ac 0x0438 0x0000 1 0
-#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01		0x01ac 0x0438 0x0000 2 0
-#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK		0x01ac 0x0438 0x0554 3 1
-#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B		0x01ac 0x0438 0x0000 4 0
-#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13		0x01ac 0x0438 0x0000 5 0
-#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX		0x01ac 0x0438 0x0634 8 3
-#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX		0x01ac 0x0438 0x0000 8 0
-#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B		0x01b0 0x043c 0x0000 0 0
-#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6		0x01b0 0x043c 0x0000 1 0
-#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02		0x01b0 0x043c 0x0000 2 0
-#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI		0x01b0 0x043c 0x055c 3 1
-#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18		0x01b0 0x043c 0x0000 4 0
-#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14		0x01b0 0x043c 0x0000 5 0
-#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS		0x01b0 0x043c 0x0000 8 0
-#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS		0x01b0 0x043c 0x0630 8 2
-#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE			0x01b4 0x0440 0x0000 0 0
-#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7		0x01b4 0x0440 0x0000 1 0
-#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03		0x01b4 0x0440 0x0000 2 0
-#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO			0x01b4 0x0440 0x0558 3 1
-#define MX6UL_PAD_NAND_CLE__EIM_ADDR16			0x01b4 0x0440 0x0000 4 0
-#define MX6UL_PAD_NAND_CLE__GPIO4_IO15			0x01b4 0x0440 0x0000 5 0
-#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS		0x01b4 0x0440 0x0630 8 3
-#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS		0x01b4 0x0440 0x0000 8 0
-#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS			0x01b8 0x0444 0x0000 0 0
-#define MX6UL_PAD_NAND_DQS__CSI_FIELD			0x01b8 0x0444 0x0530 1 1
-#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B		0x01b8 0x0444 0x0000 2 0
-#define MX6UL_PAD_NAND_DQS__PWM5_OUT			0x01b8 0x0444 0x0000 3 0
-#define MX6UL_PAD_NAND_DQS__EIM_WAIT			0x01b8 0x0444 0x0000 4 0
-#define MX6UL_PAD_NAND_DQS__GPIO4_IO16			0x01b8 0x0444 0x0000 5 0
-#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01		0x01b8 0x0444 0x0614 6 1
-#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK		0x01b8 0x0444 0x061c 8 1
-#define MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x01bc 0x0448 0x0000 0 0
-#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1		0x01bc 0x0448 0x0000 1 0
-#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC			0x01bc 0x0448 0x0000 2 0
-#define MX6UL_PAD_SD1_CMD__SPDIF_OUT			0x01bc 0x0448 0x0000 3 0
-#define MX6UL_PAD_SD1_CMD__EIM_ADDR19			0x01bc 0x0448 0x0000 4 0
-#define MX6UL_PAD_SD1_CMD__GPIO2_IO16			0x01bc 0x0448 0x0000 5 0
-#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00		0x01bc 0x0448 0x0610 6 2
-#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR			0x01bc 0x0448 0x0000 8 0
-#define MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x01c0 0x044c 0x0000 0 0
-#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2		0x01c0 0x044c 0x0000 1 0
-#define MX6UL_PAD_SD1_CLK__SAI2_MCLK			0x01c0 0x044c 0x05f0 2 1
-#define MX6UL_PAD_SD1_CLK__SPDIF_IN			0x01c0 0x044c 0x0618 3 3
-#define MX6UL_PAD_SD1_CLK__EIM_ADDR20			0x01c0 0x044c 0x0000 4 0
-#define MX6UL_PAD_SD1_CLK__GPIO2_IO17			0x01c0 0x044c 0x0000 5 0
-#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC			0x01c0 0x044c 0x0664 8 2
-#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x01c4 0x0450 0x0000 0 0
-#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3		0x01c4 0x0450 0x0000 1 0
-#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC		0x01c4 0x0450 0x05fc 2 1
-#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX		0x01c4 0x0450 0x0000 3 0
-#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21			0x01c4 0x0450 0x0000 4 0
-#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18			0x01c4 0x0450 0x0000 5 0
-#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID		0x01c4 0x0450 0x04b8 8 2
-#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x01c8 0x0454 0x0000 0 0
-#define MX6UL_PAD_SD1_DATA1__GPT2_CLK			0x01c8 0x0454 0x05a0 1 1
-#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK		0x01c8 0x0454 0x05f8 2 1
-#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX		0x01c8 0x0454 0x0584 3 3
-#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22			0x01c8 0x0454 0x0000 4 0
-#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19			0x01c8 0x0454 0x0000 5 0
-#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR		0x01c8 0x0454 0x0000 8 0
-#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x01cc 0x0458 0x0000 0 0
-#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1		0x01cc 0x0458 0x0598 1 1
-#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA		0x01cc 0x0458 0x05f4 2 1
-#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX		0x01cc 0x0458 0x0000 3 0
-#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23			0x01cc 0x0458 0x0000 4 0
-#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20			0x01cc 0x0458 0x0000 5 0
-#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1			0x01cc 0x0458 0x0000 6 0
-#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC		0x01cc 0x0458 0x0660 8 2
-#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x01d0 0x045c 0x0000 0 0
-#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2		0x01d0 0x045c 0x059c 1 1
-#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA		0x01d0 0x045c 0x0000 2 0
-#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX		0x01d0 0x045c 0x0588 3 3
-#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24			0x01d0 0x045c 0x0000 4 0
-#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21			0x01d0 0x045c 0x0000 5 0
-#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2			0x01d0 0x045c 0x0000 6 0
-#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID		0x01d0 0x045c 0x04bc 8 2
-#define MX6UL_PAD_CSI_MCLK__CSI_MCLK			0x01d4 0x0460 0x0000 0 0
-#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B			0x01d4 0x0460 0x0674 1 0
-#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B		0x01d4 0x0460 0x0000 2 0
-#define MX6UL_PAD_CSI_MCLK__I2C1_SDA			0x01d4 0x0460 0x05a8 3 0
-#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B			0x01d4 0x0460 0x0000 4 0
-#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17			0x01d4 0x0460 0x0000 5 0
-#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL		0x01d4 0x0460 0x0000 6 0
-#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX		0x01d4 0x0460 0x0000 8 0
-#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX		0x01d4 0x0460 0x064c 8 0
-#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK		0x01d8 0x0464 0x0528 0 1
-#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP			0x01d8 0x0464 0x069c 1 2
-#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B		0x01d8 0x0464 0x0000 2 0
-#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL			0x01d8 0x0464 0x05a4 3 2
-#define MX6UL_PAD_CSI_PIXCLK__EIM_OE			0x01d8 0x0464 0x0000 4 0
-#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18		0x01d8 0x0464 0x0000 5 0
-#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5		0x01d8 0x0464 0x0000 6 0
-#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX		0x01d8 0x0464 0x064c 8 3
-#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX		0x01d8 0x0464 0x0000 8 0
-#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC			0x01dc 0x0468 0x052c 0 0
-#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK			0x01dc 0x0468 0x0670 1 0
-#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK		0x01dc 0x0468 0x0000 2 0
-#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA			0x01dc 0x0468 0x05b0 3 0
-#define MX6UL_PAD_CSI_VSYNC__EIM_RW			0x01dc 0x0468 0x0000 4 0
-#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19			0x01dc 0x0468 0x0000 5 0
-#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT			0x01dc 0x0468 0x0000 6 0
-#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS		0x01dc 0x0468 0x0648 8 0
-#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS		0x01dc 0x0468 0x0000 8 0
-#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC			0x01e0 0x046c 0x0524 0 0
-#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD			0x01e0 0x046c 0x0678 1 0
-#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD		0x01e0 0x046c 0x0000 2 0
-#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL			0x01e0 0x046c 0x05ac 3 0
-#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B			0x01e0 0x046c 0x0000 4 0
-#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20			0x01e0 0x046c 0x0000 5 0
-#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT			0x01e0 0x046c 0x0000 6 0
-#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS		0x01e0 0x046c 0x0000 8 0
-#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS		0x01e0 0x046c 0x0648 8 1
-#define MX6UL_PAD_CSI_DATA00__CSI_DATA02		0x01e4 0x0470 0x04c4 0 0
-#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0		0x01e4 0x0470 0x067c 1 0
-#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B		0x01e4 0x0470 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK		0x01e4 0x0470 0x0544 3 0
-#define MX6UL_PAD_CSI_DATA00__EIM_AD00			0x01e4 0x0470 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21		0x01e4 0x0470 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT		0x01e4 0x0470 0x0000 6 0
-#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX		0x01e4 0x0470 0x0000 8 0
-#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX		0x01e4 0x0470 0x0644 8 0
-#define MX6UL_PAD_CSI_DATA01__CSI_DATA03		0x01e8 0x0474 0x04c8 0 0
-#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1		0x01e8 0x0474 0x0680 1 0
-#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN		0x01e8 0x0474 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0		0x01e8 0x0474 0x0550 3 0
-#define MX6UL_PAD_CSI_DATA01__EIM_AD01			0x01e8 0x0474 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22		0x01e8 0x0474 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK			0x01e8 0x0474 0x05e0 6 0
-#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX		0x01e8 0x0474 0x0644 8 1
-#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX		0x01e8 0x0474 0x0000 8 0
-#define MX6UL_PAD_CSI_DATA02__CSI_DATA04		0x01ec 0x0478 0x04d8 0 1
-#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2		0x01ec 0x0478 0x0684 1 2
-#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD		0x01ec 0x0478 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI		0x01ec 0x0478 0x054c 3 1
-#define MX6UL_PAD_CSI_DATA02__EIM_AD02			0x01ec 0x0478 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x01ec 0x0478 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC		0x01ec 0x0478 0x0000 6 0
-#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS		0x01ec 0x0478 0x0640 8 5
-#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS		0x01ec 0x0478 0x0000 8 0
-#define MX6UL_PAD_CSI_DATA03__CSI_DATA05		0x01f0 0x047c 0x04cc 0 0
-#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3		0x01f0 0x047c 0x0688 1 0
-#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0x01f0 0x047c 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO		0x01f0 0x047c 0x0548 3 0
-#define MX6UL_PAD_CSI_DATA03__EIM_AD03			0x01f0 0x047c 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24		0x01f0 0x047c 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK		0x01f0 0x047c 0x0000 6 0
-#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS		0x01f0 0x047c 0x0000 8 0
-#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS		0x01f0 0x047c 0x0640 8 0
-#define MX6UL_PAD_CSI_DATA04__CSI_DATA06		0x01f4 0x0480 0x04dc 0 1
-#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4		0x01f4 0x0480 0x068c 1 2
-#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x01f4 0x0480 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK		0x01f4 0x0480 0x0534 3 1
-#define MX6UL_PAD_CSI_DATA04__EIM_AD04			0x01f4 0x0480 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25		0x01f4 0x0480 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC		0x01f4 0x0480 0x05ec 6 1
-#define MX6UL_PAD_CSI_DATA04__USDHC1_WP			0x01f4 0x0480 0x066c 8 2
-#define MX6UL_PAD_CSI_DATA05__CSI_DATA07		0x01f8 0x0484 0x04e0 0 1
-#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5		0x01f8 0x0484 0x0690 1 2
-#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0x01f8 0x0484 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0		0x01f8 0x0484 0x0540 3 1
-#define MX6UL_PAD_CSI_DATA05__EIM_AD05			0x01f8 0x0484 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26		0x01f8 0x0484 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK		0x01f8 0x0484 0x05e8 6 1
-#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B		0x01f8 0x0484 0x0668 8 2
-#define MX6UL_PAD_CSI_DATA06__CSI_DATA08		0x01fc 0x0488 0x04e4 0 1
-#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6		0x01fc 0x0488 0x0694 1 2
-#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0x01fc 0x0488 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI		0x01fc 0x0488 0x053c 3 1
-#define MX6UL_PAD_CSI_DATA06__EIM_AD06			0x01fc 0x0488 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27		0x01fc 0x0488 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA		0x01fc 0x0488 0x05e4 6 1
-#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B		0x01fc 0x0488 0x0000 8 0
-#define MX6UL_PAD_CSI_DATA07__CSI_DATA09		0x0200 0x048c 0x04e8 0 1
-#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7		0x0200 0x048c 0x0698 1 2
-#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0x0200 0x048c 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO		0x0200 0x048c 0x0538 3 1
-#define MX6UL_PAD_CSI_DATA07__EIM_AD07			0x0200 0x048c 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28		0x0200 0x048c 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA		0x0200 0x048c 0x0000 6 0
-#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT		0x0200 0x048c 0x0000 8 0
-
-#endif /* __DTS_IMX6UL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts
deleted file mode 100644
index b7c96fbe7a919..0000000000000
--- a/arch/arm/boot/dts/imx6ul-prti6g.dts
+++ /dev/null
@@ -1,352 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2016 Protonic Holland
- * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Protonic PRTI6G Board";
-	compatible = "prt,prti6g", "fsl,imx6ul";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	clock_ksz8081_in: clock-ksz8081-in {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	clock_ksz8081_out: clock-ksz8081-out {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-output-names = "enet1_ref_pad";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-0 {
-			label = "debug0";
-			gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_3v2: regulator-3v2 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v2";
-		regulator-min-microvolt = <3200000>;
-		regulator-max-microvolt = <3200000>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&clks {
-	clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&clock_ksz8081_out>;
-	clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "enet1_ref_pad";
-	assigned-clocks = <&clks IMX6UL_CLK_ENET1_REF_SEL>;
-	assigned-clock-parents = <&clock_ksz8081_out>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_eth1>;
-	phy-mode = "rmii";
-	phy-handle = <&rmii_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ8081RNA PHY */
-		rmii_phy: ethernet-phy@0 {
-			reg = <0>;
-			interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-			clocks = <&clock_ksz8081_in>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	/* additional i2c devices are added automatically by the boot loader */
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	adc@49 {
-		compatible = "ti,ads1015";
-		reg = <0x49>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@4 {
-			reg = <4>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@5 {
-			reg = <5>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@6 {
-			reg = <6>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@7 {
-			reg = <7>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	temperature-sensor@70 {
-		compatible = "ti,tmp103";
-		reg = <0x70>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3v2>;
-	no-1-8-v;
-	disable-wp;
-	cap-sd-highspeed;
-	no-mmc;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	no-sd;
-	no-sdio;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX		0x0b0b0
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX		0x0b0b0
-			/* SR */
-			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03		0x0b0b0
-			/* TERM */
-			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04		0x0b0b0
-			/* nSMBALERT */
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02		0x0b0b0
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX		0x0b0b0
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX		0x0b0b0
-			/* SR */
-			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05		0x0b0b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK		0x0b0b0
-			MX6UL_PAD_CSI_DATA05__GPIO4_IO26		0x000b1
-			MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI		0x0b0b0
-			MX6UL_PAD_CSI_DATA07__ECSPI1_MISO		0x0b0b0
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK		0x0b0b0
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22		0x000b1
-			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI		0x0b0b0
-			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO		0x0b0b0
-		>;
-	};
-
-	pinctrl_eth1: eth1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC			0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO		0x100b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00		0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01		0x1b0b0
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN		0x100b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER		0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN		0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00		0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01		0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1		0x1b000
-			/* PHY ENET1_RST */
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00		0x00880
-			/* PHY ENET1_IRQ */
-			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01		0x00880
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			/* HW revision detect */
-			/* REV_ID0 */
-			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08		0x1b0b0
-			/* REV_ID1 */
-			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09		0x1b0b0
-			/* REV_ID2 */
-			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10		0x1b0b0
-			/* REV_ID3 */
-			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11		0x1b0b0
-			/* BOARD_ID0 */
-			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13		0x1b0b0
-			/* BOARD_ID1 */
-			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14		0x1b0b0
-			/* BOARD_ID2 */
-			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15		0x1b0b0
-			/* BOARD_ID3 */
-			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12		0x1b0b0
-			/* Safety controller IO */
-			/* WAKE_SC */
-			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06		0x1b0b0
-			/* PROGRAM_SC */
-			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07		0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
-			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_VSYNC__I2C2_SDA		0x4001b8b0
-			MX6UL_PAD_CSI_HSYNC__I2C2_SCL		0x4001b8b0
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DQS__GPIO4_IO16			0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX		0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX		0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x070b1
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x07099
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x070b1
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x070b1
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x070b1
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x070b1
-			/* SD1 CD */
-			MX6UL_PAD_NAND_READY_B__GPIO4_IO12		0x170b0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD			0x170f9
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK			0x100f9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0		0x170f9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1		0x170f9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2		0x170f9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3		0x170f9
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4		0x170f9
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5		0x170f9
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6		0x170f9
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7		0x170f9
-			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B		0x170b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
deleted file mode 100644
index 57e647fc32374..0000000000000
--- a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
+++ /dev/null
@@ -1,211 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/*
- * Common for
- * - TQMa6ULx
- * - TQMa6ULxL
- * - TQMa6ULLx
- * - TQMa6ULLxL
- */
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	pinctrl-1 = <&pinctrl_i2c4_recovery>;
-	scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	pfuze3000: pmic@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			reg_sw1a: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-ramp-delay = <6250>;
-				/* not used */
-			};
-
-			reg_sw1b_core: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			reg_sw2: sw2 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			reg_sw3_ddr: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_swbst: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				/* not used */
-			};
-
-			reg_snvs_3v0: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vrefddr: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vccsd: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			reg_v33_3v3: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vldo1_3v3: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				/* not used */
-			};
-
-			reg_vldo2: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				/* not used */
-			};
-
-			reg_vldo3: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				/* not used */
-			};
-
-			reg_vldo4: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	jc42_1a: eeprom-temperature@1a {
-		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
-		reg = <0x1a>;
-	};
-
-	m24c64_50: eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	m24c02_52: eeprom@52 {
-		compatible = "nxp,se97b", "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-		read-only;
-	};
-
-	rtc0: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-	};
-};
-
-&gpio4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pmic>;
-
-	/*
-	 * PMIC & temperature sensor IRQ
-	 * Both do currently not use IRQ
-	 * potentially dangerous if used on baseboard
-	 */
-	pmic-int-hog {
-		gpio-hog;
-		gpios = <24 0>;
-		input;
-	};
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi>;
-	status = "okay";
-
-	flash0: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <33000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <1>;
-		reg = <0>;
-	};
-};
-
-/* eMMC */
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz" , "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-
-	bus-width = <8>;
-	disable-wp;
-	non-removable;
-	no-sdio;
-	no-sd;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001b8b0
-			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c4_recovery: i2c4recoverygrp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x4001b8b0
-			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21	0x4001b8b0
-		>;
-	};
-
-	pinctrl_pmic: pmic {
-		fsl,pins = <
-			/* PMIC irq */
-			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x1b099
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts
deleted file mode 100644
index f2a5f17f312e5..0000000000000
--- a/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/dts-v1/;
-
-#include "imx6ul-tqma6ul1.dtsi"
-#include "mba6ulx.dtsi"
-
-/ {
-	model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board";
-	compatible = "tq,imx6ul-tqma6ul1-mba6ulx", "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
-};
-
-/*
- * Note: can2 and fec2 are enabled on mba6ulx level (for i.MX6ULG2 usage)
- * and need to be disabled here again
- */
-&can2 {
-	status = "disabled";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_mdc>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			max-speed = <100>;
-			reg = <0>;
-		};
-	};
-};
-
-&fec2 {
-	/delete-property/ phy-handle;
-	/delete-node/ mdio;
-};
-
-&iomuxc {
-	pinctrl_enet1_mdc: enet1mdcgrp {
-		fsl,pins = <
-			/* mdio */
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi
deleted file mode 100644
index 24192d012ef7e..0000000000000
--- a/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include "imx6ul-tqma6ul2.dtsi"
-
-/ {
-	model = "TQ-Systems TQMa6UL1 SoM";
-	compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
-};
-
-/*
- * There are no module specific differences compared to TQMa6UL2,
- * only external interfaces differ
- */
-
-/*
- * Devices not available on i.MX6ULG1 and should not be enabled on
- * mainboard level (again)
- */
-&can2 {
-	status = "disabled";
-};
-
-&csi {
-	status = "disabled";
-};
-
-&fec2 {
-	status = "disabled";
-};
-
-&lcdif {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts
deleted file mode 100644
index 0757df2b8f483..0000000000000
--- a/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/dts-v1/;
-
-#include "imx6ul-tqma6ul2.dtsi"
-#include "mba6ulx.dtsi"
-
-/ {
-	model = "TQ-Systems TQMa6ULx SoM on MBa6ULx board";
-	compatible = "tq,imx6ul-tqma6ul2-mba6ulx", "tq,imx6ul-tqma6ul2", "fsl,imx6ul";
-};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi
deleted file mode 100644
index e2e95dd92263e..0000000000000
--- a/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include "imx6ul.dtsi"
-#include "imx6ul-tqma6ul-common.dtsi"
-#include "imx6ul-tqma6ulx-common.dtsi"
-
-/ {
-	model = "TQ-Systems TQMa6UL2 SoM";
-	compatible = "tq,imx6ul-tqma6ul2", "fsl,imx6ul";
-};
-
-&usdhc2 {
-	fsl,tuning-step = <6>;
-};
-
-&iomuxc {
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017051
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017051
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017051
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017051
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017051
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017051
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017051
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017051
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017051
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017051
-			/* rst */
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170e1
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
-			/* rst */
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170e1
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170e1
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170e1
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170e1
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170e1
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170e1
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170e1
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170e1
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170e1
-			/* rst */
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts
deleted file mode 100644
index 9d9b6b744a1c0..0000000000000
--- a/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/dts-v1/;
-
-#include "imx6ul-tqma6ul2l.dtsi"
-#include "mba6ulx.dtsi"
-
-/ {
-	model = "TQ Systems TQMa6UL2L SoM on MBa6ULx board";
-	compatible = "tq,imx6ul-tqma6ul2l-mba6ulx", "tq,imx6ul-tqma6ul2l", "fsl,imx6ul";
-};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi
deleted file mode 100644
index 4b87e2dc70dcd..0000000000000
--- a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include "imx6ul.dtsi"
-#include "imx6ul-tqma6ul-common.dtsi"
-#include "imx6ul-tqma6ulxl-common.dtsi"
-
-/ {
-	model = "TQ-Systems TQMa6UL2L SoM";
-	compatible = "tq,imx6ul-tqma6ul2l", "fsl,imx6ul";
-};
-
-&usdhc2 {
-	fsl,tuning-step = <6>;
-};
-
-&iomuxc {
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017051
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017051
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017051
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017051
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017051
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017051
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017051
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017051
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017051
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017051
-			/* rst */
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170e1
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
-			/* rst */
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
-			/* rst */
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi
deleted file mode 100644
index 5afb9046c202a..0000000000000
--- a/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/*
- * Common for
- * - TQMa6ULx
- * - TQMa6ULLx
- */
-
-&m24c64_50 {
-	vcc-supply = <&reg_sw2>;
-};
-
-&m24c02_52 {
-	vcc-supply = <&reg_sw2>;
-};
-
-&reg_sw2 {
-	regulator-boot-on;
-	regulator-always-on;
-};
-
-/* eMMC */
-&usdhc2 {
-	vmmc-supply = <&reg_sw2>;
-	vqmmc-supply = <&reg_vldo4>;
-};
-
-&iomuxc {
-	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70b9
-			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70b9
-			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70b9
-			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70b9
-			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70b9
-			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi
deleted file mode 100644
index ba84a4f70ebde..0000000000000
--- a/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/*
- * Common for
- * - TQMa6ULxL
- * - TQMa6ULLxL
- */
-
-/ {
-	reg_vin: reg-vin {
-		compatible = "regulator-fixed";
-		regulator-name = "VIN";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&m24c64_50 {
-	vcc-supply = <&reg_vin>;
-};
-
-&m24c02_52 {
-	vcc-supply = <&reg_vin>;
-};
-
-/* eMMC */
-&usdhc2 {
-	vmmc-supply = <&reg_vin>;
-	vqmmc-supply = <&reg_vldo4>;
-};
-
-&iomuxc {
-	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70a9
-			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a9
-			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70a9
-			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70a9
-			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70a9
-			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts
deleted file mode 100644
index 8c2f3df79b47f..0000000000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-tx6ul.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TXUL-0010 Module";
-	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
-
-	aliases {
-		/delete-property/ mmc1;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts
deleted file mode 100644
index d82698e7d50fb..0000000000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-tx6ul.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TXUL-0011 Module";
-	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
-
-	aliases {
-		mmc0 = &usdhc2;
-		mmc1 = &usdhc1;
-	};
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	fsl,wp-controller;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
deleted file mode 100644
index 92ac0edcb6080..0000000000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-tx6ul.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
-	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
-
-	aliases {
-		lcdif-24bit-pins-a = &pinctrl_disp0_3;
-		mmc0 = &usdhc1;
-		/delete-property/ mmc1;
-		serial2 = &uart3;
-		serial4 = &uart5;
-	};
-	/delete-node/ sound;
-};
-
-&can1 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&fec1 {
-	pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
-	/delete-node/ mdio;
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
-	phy-supply = <&reg_3v3_etn>;
-	phy-handle = <&etnphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		etnphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_etnphy0_int>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-			interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
-			status = "okay";
-		};
-
-		etnphy1: ethernet-phy@2 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_etnphy1_int>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
-			interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
-			status = "okay";
-		};
-	};
-};
-
-&i2c_gpio {
-	status = "disabled";
-};
-
-&i2c2 {
-	/delete-node/ codec@a;
-	/delete-node/ touchscreen@48;
-
-	rtc: rtc@6f {
-		compatible = "microchip,mcp7940x";
-		reg = <0x6f>;
-	};
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcdif {
-	pinctrl-0 = <&pinctrl_disp0_3>;
-};
-
-&reg_usbotg_vbus{
-	status = "disabled";
-};
-
-&usdhc1 {
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	non-removable;
-	/delete-property/ cd-gpios;
-	cap-sdio-irq;
-};
-
-&uart1 {
-	pinctrl-0 = <&pinctrl_uart1>;
-	/delete-property/ uart-has-rtscts;
-};
-
-&uart2 {
-	pinctrl-0 = <&pinctrl_uart2>;
-	/delete-property/ uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	status = "okay";
-};
-
-&uart7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart7>;
-	status = "okay";
-};
-
-&uart8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart8>;
-	status = "disabled"; /* conflicts with LCDIF */
-};
-
-&iomuxc {
-	hoggrp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x0b0b0 /* WLAN_RESET */
-		>;
-	};
-
-	pinctrl_disp0_3: disp0grp-3 {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
-			/* LCD_DATA08..09 not wired */
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
-			/* LCD_DATA16..17 not wired */
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
-		>;
-	};
-
-	pinctrl_enet2_mdio: enet2-mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x0b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x0b0b0
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x0b0b0
-			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x0b0b0
-			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart7: uart7grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x0b0b0
-			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart8: uart8grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA20__UART8_DCE_TX	0x0b0b0
-			MX6UL_PAD_LCD_DATA21__UART8_DCE_RX	0x0b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
deleted file mode 100644
index 70cef5e817bd1..0000000000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ /dev/null
@@ -1,947 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	aliases {
-		can0 = &can2;
-		can1 = &can1;
-		display = &display;
-		i2c0 = &i2c2;
-		i2c1 = &i2c_gpio;
-		i2c2 = &i2c1;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		lcdif-23bit-pins-a = &pinctrl_disp0_1;
-		lcdif-24bit-pins-a = &pinctrl_disp0_2;
-		pwm0 = &pwm5;
-		reg-can-xcvr = &reg_can_xcvr;
-		serial2 = &uart5;
-		serial4 = &uart3;
-		spi0 = &ecspi2;
-		spi1 = &spi_gpio;
-		stk5led = &user_led;
-		usbh1 = &usbotg2;
-		usbotg = &usbotg1;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0>; /* will be filled by U-Boot */
-	};
-
-	clocks {
-		mclk: mclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd_rst>;
-		enable-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm5 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_lcd_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	i2c_gpio: i2c-gpio {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio>;
-		gpios = <
-			&gpio5 1 GPIO_ACTIVE_HIGH /* SDA */
-			&gpio5 0 GPIO_ACTIVE_HIGH /* SCL */
-		>;
-		clock-frequency = <400000>;
-		status = "okay";
-
-		ds1339: rtc@68 {
-			compatible = "dallas,ds1339";
-			reg = <0x68>;
-			status = "disabled";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led: led-user {
-			label = "Heartbeat";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_led>;
-			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_3v3_etn: regulator-3v3etn {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3_ETN";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_etnphy_power>;
-		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_2v5: regulator-2v5 {
-		compatible = "regulator-fixed";
-		regulator-name = "2V5";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_can_xcvr: regulator-canxcvr {
-		compatible = "regulator-fixed";
-		regulator-name = "CAN XCVR";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flexcan_xcvr>;
-		gpio = <&gpio3 5 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_lcd_pwr: regulator-lcdpwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd_pwr>;
-		gpio = <&gpio5 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbh1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1_vbus &pinctrl_usbh1_oc>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usbotg_vbus: regulator-usbotgvbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbotg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg_vbus &pinctrl_usbotg_oc>;
-		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	spi_gpio: spi {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_spi_gpio>;
-		gpio-mosi = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <2>;
-		cs-gpios = <
-			&gpio1 29 GPIO_ACTIVE_HIGH
-			&gpio1 10 GPIO_ACTIVE_HIGH
-		>;
-		status = "disabled";
-	};
-
-	sound {
-		compatible = "karo,imx6ul-tx6ul-sgtl5000",
-			     "simple-audio-card";
-		simple-audio-card,name = "imx6ul-tx6ul-sgtl5000-audio";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&codec_dai>;
-		simple-audio-card,frame-master = <&codec_dai>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Line", "Line In",
-			"Line", "Line Out",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-
-		cpu_dai: simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-		};
-
-		codec_dai: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <
-		&gpio1 29 GPIO_ACTIVE_HIGH
-		&gpio1 10 GPIO_ACTIVE_HIGH
-	>;
-	status = "disabled";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
-	phy-supply = <&reg_3v3_etn>;
-	phy-handle = <&etnphy0>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		etnphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_etnphy0_int>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-			status = "okay";
-		};
-
-		etnphy1: ethernet-phy@2 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_etnphy1_int>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
-			status = "okay";
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
-	phy-supply = <&reg_3v3_etn>;
-	phy-handle = <&etnphy1>;
-	status = "disabled";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	fsl,no-blockmark-swap;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_2v5>;
-		VDDIO-supply = <&reg_3v3>;
-		clocks = <&mclk>;
-	};
-
-	polytouch: polytouch@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_edt_ft5x06>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-
-	touchscreen: touchscreen@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <26 IRQ_TYPE_NONE>;
-		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-		ti,x-plate-ohms = <660>;
-		wakeup-source;
-	};
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	/* sample keymap */
-	/* row/col 0..3 are mapped to KPP row/col 4..7 */
-	linux,keymap = <
-		MATRIX_KEY(4, 4, KEY_POWER)
-		MATRIX_KEY(4, 5, KEY_KP0)
-		MATRIX_KEY(4, 6, KEY_KP1)
-		MATRIX_KEY(4, 7, KEY_KP2)
-		MATRIX_KEY(5, 4, KEY_KP3)
-		MATRIX_KEY(5, 5, KEY_KP4)
-		MATRIX_KEY(5, 6, KEY_KP5)
-		MATRIX_KEY(5, 7, KEY_KP6)
-		MATRIX_KEY(6, 4, KEY_KP7)
-		MATRIX_KEY(6, 5, KEY_KP8)
-		MATRIX_KEY(6, 6, KEY_KP9)
-	>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_disp0_1>;
-	lcd-supply = <&reg_lcd_pwr>;
-	display = <&display>;
-	status = "okay";
-
-	display: disp0 {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-		status = "okay";
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm5>;
-	status = "okay";
-};
-
-&sai2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5 &pinctrl_uart5_rtscts>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usbotg_vbus>;
-	dr_mode = "peripheral";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>;
-	bus-width = <4>;
-	no-1-8-v;
-	cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_hog: hoggrp {
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x0b0b0 /* LED */
-		>;
-	};
-
-	pinctrl_disp0_1: disp0grp-1 {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
-			/* PAD DISP0_DAT0 is used for the Flexcan transceiver control on STK5-v5 */
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x10
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x10
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x10
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x10
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x10
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
-		>;
-	};
-
-	pinctrl_disp0_2: disp0grp-2 {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x10
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x10
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x10
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x10
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x10
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x10
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x0b0b0 /* CSPI_SS */
-			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x0b0b0 /* CSPI_SS */
-			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI	0x0b0b0 /* CSPI_MOSI */
-			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO	0x0b0b0 /* CSPI_MISO */
-			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK	0x0b0b0 /* CSPI_SCLK */
-		>;
-	};
-
-	pinctrl_edt_ft5x06: edt-ft5x06grp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0 /* Interrupt */
-			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0 /* Reset */
-			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Wake */
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x000b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x000b0
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x000b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x000b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x000b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x000b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x000b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x400000b1
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x000b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x000b0
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x000b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x000b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x000b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x000b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x000b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x400000b1
-		>;
-	};
-
-	pinctrl_enet1_mdio: enet1-mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x0b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
-		>;
-	};
-
-	pinctrl_etnphy_power: etnphy-pwrgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x0b0b0 /* ETN PHY POWER */
-		>;
-	};
-
-	pinctrl_etnphy0_int: etnphy-intgrp-0 {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0 /* ETN PHY INT */
-		>;
-	};
-
-	pinctrl_etnphy0_rst: etnphy-rstgrp-0 {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0 /* ETN PHY RESET */
-		>;
-	};
-
-	pinctrl_etnphy1_int: etnphy-intgrp-1 {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x0b0b0 /* ETN PHY INT */
-		>;
-	};
-
-	pinctrl_etnphy1_rst: etnphy-rstgrp-1 {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x0b0b0 /* ETN PHY RESET */
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x0b0b0
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0x0b0b0 /* Flexcan XCVR enable */
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
-			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
-			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
-			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
-			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
-			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
-			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
-			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
-			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
-			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
-			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
-			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
-			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
-			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
-			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
-		>;
-	};
-
-	pinctrl_i2c_gpio: i2c-gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x4001b8b1 /* I2C SCL */
-			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x4001b8b1 /* I2C SDA */
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__I2C2_SCL		0x4001b8b1
-			MX6UL_PAD_GPIO1_IO01__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_kpp: kppgrp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__KPP_COL06	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__KPP_COL07	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04	0x1b0b0
-			MX6UL_PAD_ENET2_RX_EN__KPP_ROW05	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07	0x1b0b0
-		>;
-	};
-
-	pinctrl_lcd_pwr: lcd-pwrgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0 /* LCD Power Enable */
-		>;
-	};
-
-	pinctrl_lcd_rst: lcd-rstgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_RESET__GPIO3_IO04	0x0b0b0 /* LCD Reset */
-		>;
-	};
-
-	pinctrl_pwm5: pwm5grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DQS__PWM5_OUT		0x0b0b0
-		>;
-	};
-
-	pinctrl_sai2: sai2grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x0b0b0 /* SSI1_RXD */
-			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x0b0b0 /* SSI1_TXD */
-			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x0b0b0 /* SSI1_CLK */
-			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x0b0b0 /* SSI1_FS */
-		>;
-	};
-
-	pinctrl_spi_gpio: spi-gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x0b0b0 /* CSPI_SS */
-			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x0b0b0 /* CSPI_SS */
-			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x0b0b0 /* CSPI_MOSI */
-			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x0b0b0 /* CSPI_MISO */
-			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x0b0b0 /* CSPI_SCLK */
-		>;
-	};
-
-	pinctrl_tsc2007: tsc2007grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x1b0b0 /* Interrupt */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x0b0b0
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart1_rtscts: uart1-rtsctsgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS	0x0b0b0
-			MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x0b0b0
-			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart2_rtscts: uart2-rtsctsgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x0b0b0
-			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX	0x0b0b0
-			MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart5_rtscts: uart5-rtsctsgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x0b0b0
-			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x0b0b0
-		>;
-	};
-
-	pinctrl_usbh1_oc: usbh1-ocgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x17059 /* USBH1_OC */
-		>;
-	};
-
-	pinctrl_usbh1_vbus: usbh1-vbusgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x0b0b0 /* USBH1_VBUSEN */
-		>;
-	};
-
-	pinctrl_usbotg_oc: usbotg-ocgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x17059 /* USBOTG_OC */
-		>;
-	};
-
-	pinctrl_usbotg_vbus: usbotg-vbusgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x1b0b0 /* USBOTG_VBUSEN */
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x070b1
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x07099
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x070b1
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x070b1
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x070b1
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x070b1
-		>;
-	};
-
-	pinctrl_usdhc1_cd: usdhc1cdgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x170b0 /* SD1 CD */
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x070b1
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x070b1
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x070b1
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x070b1
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x070b1
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x070b1
-			/* eMMC RESET */
-			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x170b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
deleted file mode 100644
index 3d9d0f8235685..0000000000000
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ /dev/null
@@ -1,1112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2015 Freescale Semiconductor, Inc.
-
-#include <dt-bindings/clock/imx6ul-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "imx6ul-pinfunc.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		ethernet0 = &fec1;
-		ethernet1 = &fec2;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		serial6 = &uart7;
-		serial7 = &uart8;
-		sai1 = &sai1;
-		sai2 = &sai2;
-		sai3 = &sai3;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &ecspi3;
-		spi3 = &ecspi4;
-		usb0 = &usbotg1;
-		usb1 = &usbotg2;
-		usbphy0 = &usbphy1;
-		usbphy1 = &usbphy2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <696000000>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			#cooling-cells = <2>;
-			operating-points =
-				/* kHz	uV */
-				<696000	1275000>,
-				<528000	1175000>,
-				<396000	1025000>,
-				<198000	950000>;
-			fsl,soc-operating-points =
-				/* KHz	uV */
-				<696000	1275000>,
-				<528000	1175000>,
-				<396000	1175000>,
-				<198000	1175000>;
-			clocks = <&clks IMX6UL_CLK_ARM>,
-				 <&clks IMX6UL_CLK_PLL2_BUS>,
-				 <&clks IMX6UL_CLK_PLL2_PFD2>,
-				 <&clks IMX6UL_CA7_SECONDARY_SEL>,
-				 <&clks IMX6UL_CLK_STEP>,
-				 <&clks IMX6UL_CLK_PLL1_SW>,
-				 <&clks IMX6UL_CLK_PLL1_SYS>;
-			clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
-				      "secondary_sel", "step", "pll1_sw",
-				      "pll1_sys";
-			arm-supply = <&reg_arm>;
-			soc-supply = <&reg_soc>;
-			nvmem-cells = <&cpu_speed_grade>;
-			nvmem-cell-names = "speed_grade";
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-		interrupt-parent = <&intc>;
-		status = "disabled";
-	};
-
-	ckil: clock-cli {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "ckil";
-	};
-
-	osc: clock-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc";
-	};
-
-	ipp_di0: clock-di0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-		clock-output-names = "ipp_di0";
-	};
-
-	ipp_di1: clock-di1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-		clock-output-names = "ipp_di1";
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupt-parent = <&gpc>;
-		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gpc>;
-		ranges;
-
-		ocram: sram@900000 {
-			compatible = "mmio-sram";
-			reg = <0x00900000 0x20000>;
-			ranges = <0 0x00900000 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-
-		intc: interrupt-controller@a01000 {
-			compatible = "arm,gic-400", "arm,cortex-a7-gic";
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupt-parent = <&intc>;
-			reg = <0x00a01000 0x1000>,
-			      <0x00a02000 0x2000>,
-			      <0x00a04000 0x2000>,
-			      <0x00a06000 0x2000>;
-		};
-
-		dma_apbh: dma-apbh@1804000 {
-			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
-			reg = <0x01804000 0x2000>;
-			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			dma-channels = <4>;
-			clocks = <&clks IMX6UL_CLK_APBHDMA>;
-		};
-
-		gpmi: nand-controller@1806000 {
-			compatible = "fsl,imx6q-gpmi-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
-			reg-names = "gpmi-nand", "bch";
-			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "bch";
-			clocks = <&clks IMX6UL_CLK_GPMI_IO>,
-				 <&clks IMX6UL_CLK_GPMI_APB>,
-				 <&clks IMX6UL_CLK_GPMI_BCH>,
-				 <&clks IMX6UL_CLK_GPMI_BCH_APB>,
-				 <&clks IMX6UL_CLK_PER_BCH>;
-			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
-				      "gpmi_bch_apb", "per1_bch";
-			dmas = <&dma_apbh 0>;
-			dma-names = "rx-tx";
-			status = "disabled";
-		};
-
-		aips1: bus@2000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02000000 0x100000>;
-			ranges;
-
-			spba-bus@2000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x02000000 0x40000>;
-				ranges;
-
-				ecspi1: spi@2008000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02008000 0x4000>;
-					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_ECSPI1>,
-						 <&clks IMX6UL_CLK_ECSPI1>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				ecspi2: spi@200c000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
-					reg = <0x0200c000 0x4000>;
-					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_ECSPI2>,
-						 <&clks IMX6UL_CLK_ECSPI2>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				ecspi3: spi@2010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02010000 0x4000>;
-					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_ECSPI3>,
-						 <&clks IMX6UL_CLK_ECSPI3>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				ecspi4: spi@2014000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02014000 0x4000>;
-					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_ECSPI4>,
-						 <&clks IMX6UL_CLK_ECSPI4>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				uart7: serial@2018000 {
-					compatible = "fsl,imx6ul-uart",
-						     "fsl,imx6q-uart";
-					reg = <0x02018000 0x4000>;
-					interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_UART7_IPG>,
-						 <&clks IMX6UL_CLK_UART7_SERIAL>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart1: serial@2020000 {
-					compatible = "fsl,imx6ul-uart",
-						     "fsl,imx6q-uart";
-					reg = <0x02020000 0x4000>;
-					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_UART1_IPG>,
-						 <&clks IMX6UL_CLK_UART1_SERIAL>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart8: serial@2024000 {
-					compatible = "fsl,imx6ul-uart",
-						     "fsl,imx6q-uart";
-					reg = <0x02024000 0x4000>;
-					interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_UART8_IPG>,
-						 <&clks IMX6UL_CLK_UART8_SERIAL>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				sai1: sai@2028000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
-					reg = <0x02028000 0x4000>;
-					interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
-						 <&clks IMX6UL_CLK_SAI1>,
-						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
-					clock-names = "bus", "mclk1", "mclk2", "mclk3";
-					dmas = <&sdma 35 24 0>,
-					       <&sdma 36 24 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				sai2: sai@202c000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
-					reg = <0x0202c000 0x4000>;
-					interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
-						 <&clks IMX6UL_CLK_SAI2>,
-						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
-					clock-names = "bus", "mclk1", "mclk2", "mclk3";
-					dmas = <&sdma 37 24 0>,
-					       <&sdma 38 24 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				sai3: sai@2030000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
-					reg = <0x02030000 0x4000>;
-					interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
-						 <&clks IMX6UL_CLK_SAI3>,
-						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
-					clock-names = "bus", "mclk1", "mclk2", "mclk3";
-					dmas = <&sdma 39 24 0>,
-					       <&sdma 40 24 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				asrc: asrc@2034000 {
-					compatible = "fsl,imx6ul-asrc", "fsl,imx53-asrc";
-					reg = <0x2034000 0x4000>;
-					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
-						<&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>,
-						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-						<&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>,
-						<&clks IMX6UL_CLK_SPBA>;
-					clock-names = "mem", "ipg", "asrck_0",
-						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
-						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
-						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
-						"asrck_d", "asrck_e", "asrck_f", "spba";
-					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
-						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
-					dma-names = "rxa", "rxb", "rxc",
-						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
-					fsl,asrc-width = <16>;
-					status = "okay";
-				};
-			};
-
-			tsc: tsc@2040000 {
-				compatible = "fsl,imx6ul-tsc";
-				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_IPG>,
-					 <&clks IMX6UL_CLK_ADC2>;
-				clock-names = "tsc", "adc";
-				status = "disabled";
-			};
-
-			pwm1: pwm@2080000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x02080000 0x4000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM1>,
-					 <&clks IMX6UL_CLK_PWM1>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm2: pwm@2084000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x02084000 0x4000>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM2>,
-					 <&clks IMX6UL_CLK_PWM2>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm3: pwm@2088000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x02088000 0x4000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM3>,
-					 <&clks IMX6UL_CLK_PWM3>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm4: pwm@208c000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x0208c000 0x4000>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM4>,
-					 <&clks IMX6UL_CLK_PWM4>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			can1: can@2090000 {
-				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x02090000 0x4000>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
-					 <&clks IMX6UL_CLK_CAN1_SERIAL>;
-				clock-names = "ipg", "per";
-				fsl,stop-mode = <&gpr 0x10 1>;
-				status = "disabled";
-			};
-
-			can2: can@2094000 {
-				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x02094000 0x4000>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
-					 <&clks IMX6UL_CLK_CAN2_SERIAL>;
-				clock-names = "ipg", "per";
-				fsl,stop-mode = <&gpr 0x10 2>;
-				status = "disabled";
-			};
-
-			gpt1: timer@2098000 {
-				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
-				reg = <0x02098000 0x4000>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
-					 <&clks IMX6UL_CLK_GPT1_SERIAL>;
-				clock-names = "ipg", "per";
-			};
-
-			gpio1: gpio@209c000 {
-				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
-				reg = <0x0209c000 0x4000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_GPIO1>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc  0 23 10>, <&iomuxc 10 17 6>,
-					      <&iomuxc 16 33 16>;
-			};
-
-			gpio2: gpio@20a0000 {
-				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
-				reg = <0x020a0000 0x4000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_GPIO2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
-			};
-
-			gpio3: gpio@20a4000 {
-				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
-				reg = <0x020a4000 0x4000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_GPIO3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 65 29>;
-			};
-
-			gpio4: gpio@20a8000 {
-				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
-				reg = <0x020a8000 0x4000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_GPIO4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
-			};
-
-			gpio5: gpio@20ac000 {
-				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
-				reg = <0x020ac000 0x4000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_GPIO5>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
-			};
-
-			fec2: ethernet@20b4000 {
-				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
-				reg = <0x020b4000 0x4000>;
-				interrupt-names = "int0", "pps";
-				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_ENET>,
-					 <&clks IMX6UL_CLK_ENET_AHB>,
-					 <&clks IMX6UL_CLK_ENET_PTP>,
-					 <&clks IMX6UL_CLK_ENET2_REF_SEL>;
-				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref";
-				fsl,num-tx-queues = <1>;
-				fsl,num-rx-queues = <1>;
-				fsl,stop-mode = <&gpr 0x10 4>;
-				fsl,magic-packet;
-				status = "disabled";
-			};
-
-			kpp: keypad@20b8000 {
-				compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
-				reg = <0x020b8000 0x4000>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_KPP>;
-				status = "disabled";
-			};
-
-			wdog1: watchdog@20bc000 {
-				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
-				reg = <0x020bc000 0x4000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_WDOG1>;
-			};
-
-			wdog2: watchdog@20c0000 {
-				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
-				reg = <0x020c0000 0x4000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_WDOG2>;
-				status = "disabled";
-			};
-
-			clks: clock-controller@20c4000 {
-				compatible = "fsl,imx6ul-ccm";
-				reg = <0x020c4000 0x4000>;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
-				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
-			};
-
-			anatop: anatop@20c8000 {
-				compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
-					     "syscon", "simple-mfd";
-				reg = <0x020c8000 0x1000>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-
-				reg_3p0: regulator-3p0 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2625000>;
-					regulator-max-microvolt = <3400000>;
-					anatop-reg-offset = <0x120>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2625000>;
-					anatop-max-voltage = <3400000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_arm: regulator-vddcore {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "cpu";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <0>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <24>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				reg_soc: regulator-vddsoc {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddsoc";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <18>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <28>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				tempmon: tempmon {
-					compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
-					interrupt-parent = <&gpc>;
-					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-					fsl,tempmon = <&anatop>;
-					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-					nvmem-cell-names = "calib", "temp_grade";
-					clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
-				};
-			};
-
-			usbphy1: usbphy@20c9000 {
-				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020c9000 0x1000>;
-				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_USBPHY1>;
-				phy-3p0-supply = <&reg_3p0>;
-				fsl,anatop = <&anatop>;
-			};
-
-			usbphy2: usbphy@20ca000 {
-				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020ca000 0x1000>;
-				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_USBPHY2>;
-				phy-3p0-supply = <&reg_3p0>;
-				fsl,anatop = <&anatop>;
-			};
-
-			snvs: snvs@20cc000 {
-				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-				reg = <0x020cc000 0x4000>;
-
-				snvs_rtc: snvs-rtc-lp {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap = <&snvs>;
-					offset = <0x34>;
-					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				snvs_poweroff: snvs-poweroff {
-					compatible = "syscon-poweroff";
-					regmap = <&snvs>;
-					offset = <0x38>;
-					value = <0x60>;
-					mask = <0x60>;
-					status = "disabled";
-				};
-
-				snvs_pwrkey: snvs-powerkey {
-					compatible = "fsl,sec-v4.0-pwrkey";
-					regmap = <&snvs>;
-					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-					linux,keycode = <KEY_POWER>;
-					wakeup-source;
-					status = "disabled";
-				};
-
-				snvs_lpgpr: snvs-lpgpr {
-					compatible = "fsl,imx6ul-snvs-lpgpr";
-				};
-			};
-
-			epit1: epit@20d0000 {
-				reg = <0x020d0000 0x4000>;
-				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			epit2: epit@20d4000 {
-				reg = <0x020d4000 0x4000>;
-				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			src: reset-controller@20d8000 {
-				compatible = "fsl,imx6ul-src", "fsl,imx51-src";
-				reg = <0x020d8000 0x4000>;
-				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
-			};
-
-			gpc: gpc@20dc000 {
-				compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
-				reg = <0x020dc000 0x4000>;
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-parent = <&intc>;
-			};
-
-			iomuxc: pinctrl@20e0000 {
-				compatible = "fsl,imx6ul-iomuxc";
-				reg = <0x020e0000 0x4000>;
-			};
-
-			gpr: iomuxc-gpr@20e4000 {
-				compatible = "fsl,imx6ul-iomuxc-gpr",
-					     "fsl,imx6q-iomuxc-gpr", "syscon";
-				reg = <0x020e4000 0x4000>;
-			};
-
-			gpt2: timer@20e8000 {
-				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
-				reg = <0x020e8000 0x4000>;
-				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
-					 <&clks IMX6UL_CLK_GPT2_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			sdma: dma-controller@20ec000 {
-				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
-					     "fsl,imx35-sdma";
-				reg = <0x020ec000 0x4000>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_IPG>,
-					 <&clks IMX6UL_CLK_SDMA>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
-			};
-
-			pwm5: pwm@20f0000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x020f0000 0x4000>;
-				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM5>,
-					 <&clks IMX6UL_CLK_PWM5>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm6: pwm@20f4000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x020f4000 0x4000>;
-				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM6>,
-					 <&clks IMX6UL_CLK_PWM6>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm7: pwm@20f8000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x020f8000 0x4000>;
-				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM7>,
-					 <&clks IMX6UL_CLK_PWM7>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm8: pwm@20fc000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x020fc000 0x4000>;
-				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM8>,
-					 <&clks IMX6UL_CLK_PWM8>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-		};
-
-		aips2: bus@2100000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02100000 0x100000>;
-			ranges;
-
-			crypto: crypto@2140000 {
-				compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x2140000 0x3c000>;
-				ranges = <0 0x2140000 0x3c000>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_CAAM_IPG>, <&clks IMX6UL_CLK_CAAM_ACLK>,
-					 <&clks IMX6UL_CLK_CAAM_MEM>;
-				clock-names = "ipg", "aclk", "mem";
-
-				sec_jr0: jr@1000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x1000 0x1000>;
-					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				sec_jr1: jr@2000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x2000 0x1000>;
-					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				sec_jr2: jr@3000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x3000 0x1000>;
-					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-
-			usbotg1: usb@2184000 {
-				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
-				reg = <0x02184000 0x200>;
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy1>;
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbotg2: usb@2184200 {
-				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
-				reg = <0x02184200 0x200>;
-				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy2>;
-				fsl,usbmisc = <&usbmisc 1>;
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@2184800 {
-				#index-cells = <1>;
-				compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x02184800 0x200>;
-			};
-
-			fec1: ethernet@2188000 {
-				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
-				reg = <0x02188000 0x4000>;
-				interrupt-names = "int0", "pps";
-				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_ENET>,
-					 <&clks IMX6UL_CLK_ENET_AHB>,
-					 <&clks IMX6UL_CLK_ENET_PTP>,
-					 <&clks IMX6UL_CLK_ENET1_REF_SEL>;
-				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref";
-				fsl,num-tx-queues = <1>;
-				fsl,num-rx-queues = <1>;
-				fsl,stop-mode = <&gpr 0x10 3>;
-				fsl,magic-packet;
-				status = "disabled";
-			};
-
-			usdhc1: mmc@2190000 {
-				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
-				reg = <0x02190000 0x4000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_USDHC1>,
-					 <&clks IMX6UL_CLK_USDHC1>,
-					 <&clks IMX6UL_CLK_USDHC1>;
-				clock-names = "ipg", "ahb", "per";
-				fsl,tuning-step = <2>;
-				fsl,tuning-start-tap = <20>;
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc2: mmc@2194000 {
-				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
-				reg = <0x02194000 0x4000>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_USDHC2>,
-					 <&clks IMX6UL_CLK_USDHC2>,
-					 <&clks IMX6UL_CLK_USDHC2>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				fsl,tuning-step = <2>;
-				fsl,tuning-start-tap = <20>;
-				status = "disabled";
-			};
-
-			adc1: adc@2198000 {
-				compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
-				reg = <0x02198000 0x4000>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_ADC1>;
-				clock-names = "adc";
-				fsl,adck-max-frequency = <30000000>, <40000000>,
-							 <20000000>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@21a0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
-				reg = <0x021a0000 0x4000>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_I2C1>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@21a4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
-				reg = <0x021a4000 0x4000>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_I2C2>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@21a8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
-				reg = <0x021a8000 0x4000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_I2C3>;
-				status = "disabled";
-			};
-
-			memory-controller@21b0000 {
-				compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
-				reg = <0x021b0000 0x4000>;
-				clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>;
-			};
-
-			weim: weim@21b8000 {
-				#address-cells = <2>;
-				#size-cells = <1>;
-				compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
-				reg = <0x021b8000 0x4000>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_EIM>;
-				fsl,weim-cs-gpr = <&gpr>;
-				status = "disabled";
-			};
-
-			ocotp: efuse@21bc000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,imx6ul-ocotp", "syscon";
-				reg = <0x021bc000 0x4000>;
-				clocks = <&clks IMX6UL_CLK_OCOTP>;
-
-				tempmon_calib: calib@38 {
-					reg = <0x38 4>;
-				};
-
-				tempmon_temp_grade: temp-grade@20 {
-					reg = <0x20 4>;
-				};
-
-				cpu_speed_grade: speed-grade@10 {
-					reg = <0x10 4>;
-				};
-			};
-
-			csi: csi@21c4000 {
-				compatible = "fsl,imx6ul-csi";
-				reg = <0x021c4000 0x4000>;
-				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_CSI>;
-				clock-names = "mclk";
-				status = "disabled";
-			};
-
-			lcdif: lcdif@21c8000 {
-				compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
-				reg = <0x021c8000 0x4000>;
-				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
-					 <&clks IMX6UL_CLK_LCDIF_APB>,
-					 <&clks IMX6UL_CLK_DUMMY>;
-				clock-names = "pix", "axi", "disp_axi";
-				status = "disabled";
-			};
-
-			pxp: pxp@21cc000 {
-				compatible = "fsl,imx6ul-pxp";
-				reg = <0x021cc000 0x4000>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PXP>;
-				clock-names = "axi";
-			};
-
-			qspi: spi@21e0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6ul-qspi";
-				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
-				reg-names = "QuadSPI", "QuadSPI-memory";
-				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_QSPI>,
-					 <&clks IMX6UL_CLK_QSPI>;
-				clock-names = "qspi_en", "qspi";
-				status = "disabled";
-			};
-
-			wdog3: watchdog@21e4000 {
-				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
-				reg = <0x021e4000 0x4000>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_WDOG3>;
-				status = "disabled";
-			};
-
-			uart2: serial@21e8000 {
-				compatible = "fsl,imx6ul-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x021e8000 0x4000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_UART2_IPG>,
-					 <&clks IMX6UL_CLK_UART2_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@21ec000 {
-				compatible = "fsl,imx6ul-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x021ec000 0x4000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_UART3_IPG>,
-					 <&clks IMX6UL_CLK_UART3_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@21f0000 {
-				compatible = "fsl,imx6ul-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x021f0000 0x4000>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_UART4_IPG>,
-					 <&clks IMX6UL_CLK_UART4_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart5: serial@21f4000 {
-				compatible = "fsl,imx6ul-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x021f4000 0x4000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_UART5_IPG>,
-					 <&clks IMX6UL_CLK_UART5_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c4: i2c@21f8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
-				reg = <0x021f8000 0x4000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_I2C4>;
-				status = "disabled";
-			};
-
-			uart6: serial@21fc000 {
-				compatible = "fsl,imx6ul-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x021fc000 0x4000>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_UART6_IPG>,
-					 <&clks IMX6UL_CLK_UART6_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
deleted file mode 100644
index 74aaa8a56a3de..0000000000000
--- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright (C) 2016 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx6ull.dtsi"
-#include "imx6ul-14x14-evk.dtsi"
-
-/ {
-	model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board";
-	compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
-	assigned-clock-rates = <320000000>;
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-aster.dts
deleted file mode 100644
index 3e0897c3a2963..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-aster.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-nonwifi.dtsi"
-#include "imx6ull-colibri-aster.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Aster";
-	compatible = "toradex,colibri-imx6ull-aster",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-/* PWM <B> */
-&pwm5 {
-	/* Pin already used by atmel_mxt_ts touchscreen */
-	status = "disabled";
-};
-
-/* PWM <C> */
-&pwm6 {
-	/* Pin already used by atmel_mxt_ts touchscreen */
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
deleted file mode 100644
index de4dc7c1a03ae..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017-2022 Toradex
- */
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
-
-		power {
-			label = "Wake-Up";
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbh_vbus: regulator-usbh-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh_reg>;
-		regulator-name = "VCC_USB[1-4]";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		vin-supply = <&reg_5v0>;
-	};
-};
-
-&adc1 {
-	status = "okay";
-};
-
-&ecspi1 {
-	status = "okay";
-
-	num-cs = <2>;
-	cs-gpios = <
-		&gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */
-		&gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */
-	>;
-};
-
-/*
- * Following SODIMM Pins should not be accessed as GPIO on Aster board:
- * 134 - AIN5_SCL (no connection)
- * 127 - Voltage Level Translator OE# signal (IC11 and IC12)
- *
- * To configure GPIO to LED5, please disable FEC2 and uncomment the following:
- *	&iomuxc {
- *		pinctrl-names = "default";
- *		pinctrl-0 = <
- *			&pinctrl_gpio1
- *			&pinctrl_gpio2
- *			&pinctrl_gpio3
- *			&pinctrl_gpio4
- *			&pinctrl_gpio6 - for non-WiFi modules only
- *			&pinctrl_gpio7
- *			&pinctrl_gpio_aster
- *		>;
- *
- *		pinctrl_gpio_aster: gpio-aster {
- *			fsl,pins = <
- *				MX6UL_PAD_GPIO1_IO07__GPIO1_IO07    0x1b0b0
- *			>;
- *		};
- *  };
- */
-
-&i2c1 {
-	status = "okay";
-
-	m41t0m6: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/* PWM <A> */
-&pwm4 {
-	status = "okay";
-};
-
-/* PWM <B> */
-&pwm5 {
-	status = "okay";
-};
-
-/* PWM <C> */
-&pwm6 {
-	status = "okay";
-};
-
-/* PWM <D> */
-&pwm7 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbotg1 {
-	disable-over-current;
-	vbus-supply = <&reg_usbh_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	disable-over-current;
-	vbus-supply = <&reg_usbh_vbus>;
-	status = "okay";
-};
-
-&usdhc1 {
-	vmmc-supply = <&reg_3v3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts
deleted file mode 100644
index 919c0464d6cb5..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-emmc-nonwifi.dtsi"
-#include "imx6ull-colibri-aster.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Aster";
-	compatible = "toradex,colibri-imx6ull-emmc-aster",
-		     "toradex,colibri-imx6ull-emmc",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts
deleted file mode 100644
index 61b93cb040c7f..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2021 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-emmc-nonwifi.dtsi"
-#include "imx6ull-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx6ull-emmc-eval",
-		     "toradex,colibri-imx6ull-emmc",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts
deleted file mode 100644
index b9060c2f7977e..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-emmc-nonwifi.dtsi"
-#include "imx6ull-colibri-iris-v2.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 1G (eMMC) on Colibri Iris V2";
-	compatible = "toradex,colibri-imx6ull-iris-v2",
-		     "toradex,colibri-imx6ull-emmc",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts
deleted file mode 100644
index 0ab71f2f5daa4..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-emmc-nonwifi.dtsi"
-#include "imx6ull-colibri-iris.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Iris";
-	compatible = "toradex,colibri-imx6ull-emmc-iris",
-		     "toradex,colibri-imx6ull-emmc",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
deleted file mode 100644
index ea238525d5c02..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
+++ /dev/null
@@ -1,187 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-#include "imx6ull-colibri.dtsi"
-
-/ {
-	aliases {
-		mmc0 = &usdhc2; /* eMMC */
-		mmc1 = &usdhc1; /* MMC 4-bit slot */
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-};
-
-&gpio1 {
-	gpio-line-names = "SODIMM_8",
-			  "SODIMM_6",
-			  "SODIMM_129",
-			  "SODIMM_89",
-			  "SODIMM_19",
-			  "SODIMM_21",
-			  "UNUSABLE_SODIMM_180",
-			  "UNUSABLE_SODIMM_184",
-			  "SODIMM_4",
-			  "SODIMM_2",
-			  "SODIMM_106",
-			  "SODIMM_71",
-			  "SODIMM_23",
-			  "SODIMM_31",
-			  "SODIMM_99",
-			  "SODIMM_102",
-			  "SODIMM_33",
-			  "SODIMM_35",
-			  "SODIMM_25",
-			  "SODIMM_27",
-			  "SODIMM_36",
-			  "SODIMM_38",
-			  "SODIMM_32",
-			  "SODIMM_34",
-			  "SODIMM_135",
-			  "SODIMM_77",
-			  "SODIMM_100",
-			  "SODIMM_186",
-			  "SODIMM_196",
-			  "SODIMM_194";
-};
-
-&gpio2 {
-	gpio-line-names = "SODIMM_55",
-			  "SODIMM_63",
-			  "SODIMM_178",
-			  "SODIMM_188",
-			  "SODIMM_73",
-			  "SODIMM_30",
-			  "SODIMM_67",
-			  "SODIMM_104",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_190",
-			  "SODIMM_47",
-			  "SODIMM_192",
-			  "SODIMM_49",
-			  "SODIMM_51",
-			  "SODIMM_53";
-};
-
-&gpio3 {
-	gpio-line-names = "SODIMM_56",
-			  "SODIMM_44",
-			  "SODIMM_68",
-			  "SODIMM_82",
-			  "",
-			  "SODIMM_76",
-			  "SODIMM_70",
-			  "SODIMM_60",
-			  "SODIMM_58",
-			  "SODIMM_78",
-			  "SODIMM_72",
-			  "SODIMM_80",
-			  "SODIMM_46",
-			  "SODIMM_62",
-			  "SODIMM_48",
-			  "SODIMM_74",
-			  "SODIMM_50",
-			  "SODIMM_52",
-			  "SODIMM_54",
-			  "SODIMM_66",
-			  "SODIMM_64",
-			  "SODIMM_57",
-			  "SODIMM_61",
-			  "SODIMM_29",
-			  "SODIMM_37",
-			  "SODIMM_88",
-			  "SODIMM_86",
-			  "SODIMM_92",
-			  "SODIMM_90";
-};
-
-&gpio4 {
-	gpio-line-names = "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_140",
-			  "SODIMM_59",
-			  "SODIMM_142",
-			  "SODIMM_144",
-			  "SODIMM_133",
-			  "SODIMM_146",
-			  "SODIMM_28",
-			  "SODIMM_75",
-			  "SODIMM_96",
-			  "SODIMM_81",
-			  "SODIMM_94",
-			  "SODIMM_101",
-			  "SODIMM_103",
-			  "SODIMM_79",
-			  "SODIMM_97",
-			  "SODIMM_69",
-			  "SODIMM_98",
-			  "SODIMM_85",
-			  "SODIMM_65";
-};
-
-&gpio5 {
-	gpio-line-names = "SODIMM_43",
-			  "SODIMM_45",
-			  "SODIMM_137",
-			  "SODIMM_95",
-			  "SODIMM_107",
-			  "SODIMM_131",
-			  "SODIMM_93",
-			  "",
-			  "SODIMM_138",
-			  "",
-			  "SODIMM_105",
-			  "SODIMM_127";
-};
-
-/* NAND */
-&gpmi {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
-		&pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7
-		&pinctrl_gpmi_gpio>;
-};
-
-&iomuxc_snvs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
-};
-
-/* eMMC */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2emmc>;
-	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
-	assigned-clock-rates = <0>, <198000000>;
-	bus-width = <8>;
-	keep-power-in-suspend;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&reg_module_3v3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
deleted file mode 100644
index d6da984e518d4..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-nonwifi.dtsi"
-#include "imx6ull-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
deleted file mode 100644
index 692ef26fbab30..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017-2022 Toradex
- */
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/* fixed crystal dedicated to mcp2515 */
-	clk16m: clk16m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <16000000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbh_vbus: regulator-usbh-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh_reg>;
-		regulator-name = "VCC_USB[1-4]";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		vin-supply = <&reg_5v0>;
-	};
-};
-
-&adc1 {
-	status = "okay";
-};
-
-&ecspi1 {
-	status = "okay";
-
-	mcp2515: can@0 {
-		compatible = "microchip,mcp2515";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can_int>;
-		reg = <0>;
-		clocks = <&clk16m>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-		spi-max-frequency = <10000000>;
-		vdd-supply = <&reg_3v3>;
-		xceiver-supply = <&reg_5v0>;
-		status = "okay";
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	/* M41T0M6 real time clock on carrier board */
-	m41t0m6: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/* PWM <A> */
-&pwm4 {
-	status = "okay";
-};
-
-/* PWM <B> */
-&pwm5 {
-	status = "okay";
-};
-
-/* PWM <C> */
-&pwm6 {
-	status = "okay";
-};
-
-/* PWM <D> */
-&pwm7 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbotg1 {
-	disable-over-current;
-	vbus-supply = <&reg_usbh_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	disable-over-current;
-	vbus-supply = <&reg_usbh_vbus>;
-	status = "okay";
-};
-
-&usdhc1 {
-	vmmc-supply = <&reg_3v3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
deleted file mode 100644
index f6b31118be17f..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-nonwifi.dtsi"
-#include "imx6ull-colibri-iris-v2.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 256M/512B on Colibri Iris V2";
-	compatible = "toradex,colibri-imx6ull-iris-v2",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&gpio1 {
-	/* This turns the LVDS transceiver on */
-	lvds-power-on-hog {
-		gpio-hog;
-		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
-		line-name = "LVDS_POWER_ON";
-		output-high;
-	};
-};
-
-&gpio2 {
-	/*
-	 * This switches the LVDS transceiver to the single-channel
-	 * output mode.
-	 */
-	lvds-ch-mode-hog {
-		gpio-hog;
-		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
-		line-name = "LVDS_CH_MODE";
-		output-high;
-	};
-
-	/*
-	 * This switches the LVDS transceiver to the 24-bit RGB mode.
-	 */
-	lvds-rgb-mode-hog {
-		gpio-hog;
-		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
-		line-name = "LVDS_RGB_MODE";
-		output-low;
-	};
-};
-
-&gpio5 {
-	/*
-	 * This switches the LVDS transceiver to VESA color mapping mode.
-	 */
-	lvds-color-map-hog {
-		gpio-hog;
-		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
-		line-name = "LVDS_COLOR_MAP";
-		output-low;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-/* PWM <B> */
-&pwm5 {
-	/* Pin already used by atmel_mxt_ts touchscreen */
-	status = "disabled";
-};
-
-/* PWM <C> */
-&pwm6 {
-	/* Pin already used by atmel_mxt_ts touchscreen */
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi
deleted file mode 100644
index 93649cad0cc0e..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-#include "imx6ull-colibri-iris.dtsi"
-
-/ {
-	reg_3v3_vmmc: regulator-3v3-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3_vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <100>;
-		enable-active-high;
-	};
-};
-
-
-&usdhc1 {
-	cap-power-off-card;
-	vmmc-supply = <&reg_3v3_vmmc>;
-	/delete-property/ keep-power-in-suspend;
-	/delete-property/ no-1-8-v;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-iris.dts
deleted file mode 100644
index 2a0d0fc3b9d65..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-iris.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-nonwifi.dtsi"
-#include "imx6ull-colibri-iris.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Iris";
-	compatible = "toradex,colibri-imx6ull-iris",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
deleted file mode 100644
index f52f8b5ad8a6e..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
-
-		power {
-			label = "Wake-Up";
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbh_vbus: regulator-usbh-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh_reg>;
-		regulator-name = "VCC_USB[1-4]";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		vin-supply = <&reg_5v0>;
-	};
-};
-
-&adc1 {
-	status = "okay";
-};
-
-&gpio1 {
-	/*
-	 * uart25_tx_on turns the UART transceiver on. If one wants to turn the
-	 * transceiver off, that property has to be deleted and the gpio handled
-	 * in userspace.
-	 * The same applies to uart1_tx_on.
-	 */
-	uart25_tx_on-hog {
-		gpio-hog;
-		gpios = <15 0>;
-		output-high;
-	};
-};
-
-&gpio2 {
-	uart1_tx_on-hog {
-		gpio-hog;
-		gpios = <7 0>;
-		output-high;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	/* M41T0M6 real time clock on carrier board */
-	m41t0m6: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/* PWM <A> */
-&pwm4 {
-	status = "okay";
-};
-
-/* PWM <B> */
-&pwm5 {
-	status = "okay";
-};
-
-/* PWM <C> */
-&pwm6 {
-	status = "okay";
-};
-
-/* PWM <D> */
-&pwm7 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbotg1 {
-	disable-over-current;
-	vbus-supply = <&reg_usbh_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	disable-over-current;
-	vbus-supply = <&reg_usbh_vbus>;
-	status = "okay";
-};
-
-&usdhc1 {
-	vmmc-supply = <&reg_3v3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
deleted file mode 100644
index 88901db255d6b..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-#include "imx6ull-colibri.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-};
-
-&gpio1 {
-	gpio-line-names = "SODIMM_8",
-			  "SODIMM_6",
-			  "SODIMM_129",
-			  "SODIMM_89",
-			  "SODIMM_19",
-			  "SODIMM_21",
-			  "UNUSABLE_SODIMM_180",
-			  "UNUSABLE_SODIMM_184",
-			  "SODIMM_4",
-			  "SODIMM_2",
-			  "SODIMM_106",
-			  "SODIMM_71",
-			  "SODIMM_23",
-			  "SODIMM_31",
-			  "SODIMM_99",
-			  "SODIMM_102",
-			  "SODIMM_33",
-			  "SODIMM_35",
-			  "SODIMM_25",
-			  "SODIMM_27",
-			  "SODIMM_36",
-			  "SODIMM_38",
-			  "SODIMM_32",
-			  "SODIMM_34",
-			  "SODIMM_135",
-			  "SODIMM_77",
-			  "SODIMM_100",
-			  "SODIMM_186",
-			  "SODIMM_196",
-			  "SODIMM_194";
-};
-
-&gpio2 {
-	gpio-line-names = "SODIMM_55",
-			  "SODIMM_63",
-			  "SODIMM_178",
-			  "SODIMM_188",
-			  "SODIMM_73",
-			  "SODIMM_30",
-			  "SODIMM_67",
-			  "SODIMM_104",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_190",
-			  "SODIMM_47",
-			  "SODIMM_192",
-			  "SODIMM_49",
-			  "SODIMM_51",
-			  "SODIMM_53";
-};
-
-&gpio3 {
-	gpio-line-names = "SODIMM_56",
-			  "SODIMM_44",
-			  "SODIMM_68",
-			  "SODIMM_82",
-			  "",
-			  "SODIMM_76",
-			  "SODIMM_70",
-			  "SODIMM_60",
-			  "SODIMM_58",
-			  "SODIMM_78",
-			  "SODIMM_72",
-			  "SODIMM_80",
-			  "SODIMM_46",
-			  "SODIMM_62",
-			  "SODIMM_48",
-			  "SODIMM_74",
-			  "SODIMM_50",
-			  "SODIMM_52",
-			  "SODIMM_54",
-			  "SODIMM_66",
-			  "SODIMM_64",
-			  "SODIMM_57",
-			  "SODIMM_61",
-			  "SODIMM_29",
-			  "SODIMM_37",
-			  "SODIMM_88",
-			  "SODIMM_86",
-			  "SODIMM_92",
-			  "SODIMM_90";
-};
-
-&gpio4 {
-	gpio-line-names = "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_59",
-			  "",
-			  "",
-			  "SODIMM_133",
-			  "",
-			  "SODIMM_28",
-			  "SODIMM_75",
-			  "SODIMM_96",
-			  "SODIMM_81",
-			  "SODIMM_94",
-			  "SODIMM_101",
-			  "SODIMM_103",
-			  "SODIMM_79",
-			  "SODIMM_97",
-			  "SODIMM_69",
-			  "SODIMM_98",
-			  "SODIMM_85",
-			  "SODIMM_65";
-};
-
-&gpio5 {
-	gpio-line-names = "SODIMM_43",
-			  "SODIMM_45",
-			  "SODIMM_137",
-			  "SODIMM_95",
-			  "SODIMM_107",
-			  "SODIMM_131",
-			  "SODIMM_93",
-			  "",
-			  "SODIMM_138",
-			  "",
-			  "SODIMM_105",
-			  "SODIMM_127";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
-		&pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7>;
-};
-
-&iomuxc_snvs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts
deleted file mode 100644
index c7da5b41966fa..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-wifi.dtsi"
-#include "imx6ull-colibri-aster.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 512MB on Colibri Aster";
-	compatible = "toradex,colibri-imx6ull-wifi-aster",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-/* PWM <B> */
-&pwm5 {
-	/* Pin already used by atmel_mxt_ts touchscreen */
-	status = "disabled";
-};
-
-/* PWM <C> */
-&pwm6 {
-	/* Pin already used by atmel_mxt_ts touchscreen */
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
deleted file mode 100644
index 917f5dbe64ba3..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-wifi.dtsi"
-#include "imx6ull-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 512MB on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx6ull-wifi-eval", "fsl,imx6ull";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
deleted file mode 100644
index 488da6df56fa1..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-wifi.dtsi"
-#include "imx6ull-colibri-iris-v2.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris V2";
-	compatible = "toradex,colibri-imx6ull-wifi-iris-v2",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&gpio1 {
-	/* This turns the LVDS transceiver on */
-	lvds-power-on-hog {
-		gpio-hog;
-		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
-		line-name = "LVDS_POWER_ON";
-		output-high;
-	};
-};
-
-&gpio2 {
-	/*
-	 * This switches the LVDS transceiver to the single-channel
-	 * output mode.
-	 */
-	lvds-ch-mode-hog {
-		gpio-hog;
-		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
-		line-name = "LVDS_CH_MODE";
-		output-high;
-	};
-
-	/*
-	 * This switches the LVDS transceiver to the 24-bit RGB mode.
-	 */
-	lvds-rgb-mode-hog {
-		gpio-hog;
-		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
-		line-name = "LVDS_RGB_MODE";
-		output-low;
-	};
-};
-
-&gpio5 {
-	/*
-	 * This switches the LVDS transceiver to VESA color mapping mode.
-	 */
-	lvds-color-map-hog {
-		gpio-hog;
-		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
-		line-name = "LVDS_COLOR_MAP";
-		output-low;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts
deleted file mode 100644
index e632532547545..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-wifi.dtsi"
-#include "imx6ull-colibri-iris.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris";
-	compatible = "toradex,colibri-imx6ull-wifi-iris",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
deleted file mode 100644
index db59ee6b1c860..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ /dev/null
@@ -1,189 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-#include "imx6ull-colibri.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	wifi_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_wifi_pdn>;
-		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&cpu0 {
-	clock-frequency = <792000000>;
-};
-
-&gpio1 {
-	gpio-line-names = "SODIMM_8",
-			  "SODIMM_6",
-			  "SODIMM_129",
-			  "",
-			  "SODIMM_19",
-			  "SODIMM_21",
-			  "UNUSABLE_SODIMM_180",
-			  "UNUSABLE_SODIMM_184",
-			  "SODIMM_4",
-			  "SODIMM_2",
-			  "SODIMM_106",
-			  "SODIMM_71",
-			  "SODIMM_23",
-			  "SODIMM_31",
-			  "SODIMM_99",
-			  "SODIMM_102",
-			  "SODIMM_33",
-			  "SODIMM_35",
-			  "SODIMM_25",
-			  "SODIMM_27",
-			  "SODIMM_36",
-			  "SODIMM_38",
-			  "SODIMM_32",
-			  "SODIMM_34",
-			  "SODIMM_135",
-			  "SODIMM_77",
-			  "SODIMM_100",
-			  "SODIMM_186",
-			  "SODIMM_196",
-			  "SODIMM_194";
-};
-
-&gpio2 {
-	gpio-line-names = "SODIMM_55",
-			  "SODIMM_63",
-			  "SODIMM_178",
-			  "SODIMM_188",
-			  "SODIMM_73",
-			  "SODIMM_30",
-			  "SODIMM_67",
-			  "SODIMM_104",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_190",
-			  "SODIMM_47",
-			  "SODIMM_192",
-			  "SODIMM_49",
-			  "SODIMM_51",
-			  "SODIMM_53";
-};
-
-&gpio3 {
-	gpio-line-names = "SODIMM_56",
-			  "SODIMM_44",
-			  "SODIMM_68",
-			  "SODIMM_82",
-			  "",
-			  "SODIMM_76",
-			  "SODIMM_70",
-			  "SODIMM_60",
-			  "SODIMM_58",
-			  "SODIMM_78",
-			  "SODIMM_72",
-			  "SODIMM_80",
-			  "SODIMM_46",
-			  "SODIMM_62",
-			  "SODIMM_48",
-			  "SODIMM_74",
-			  "SODIMM_50",
-			  "SODIMM_52",
-			  "SODIMM_54",
-			  "SODIMM_66",
-			  "SODIMM_64",
-			  "SODIMM_57",
-			  "SODIMM_61",
-			  "SODIMM_29",
-			  "SODIMM_37",
-			  "SODIMM_88",
-			  "SODIMM_86",
-			  "SODIMM_92",
-			  "SODIMM_90";
-};
-
-&gpio4 {
-	gpio-line-names = "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_59",
-			  "",
-			  "",
-			  "SODIMM_133",
-			  "",
-			  "SODIMM_28",
-			  "SODIMM_75",
-			  "SODIMM_96",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_69",
-			  "SODIMM_98",
-			  "SODIMM_85",
-			  "SODIMM_65";
-};
-
-&gpio5 {
-	gpio-line-names = "SODIMM_43",
-			  "SODIMM_45",
-			  "SODIMM_137",
-			  "SODIMM_95",
-			  "SODIMM_107",
-			  "SODIMM_131",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_105";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
-		&pinctrl_gpio4 &pinctrl_gpio7>;
-
-};
-
-&iomuxc_snvs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_snvs_gpio1>;
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
-	assigned-clock-rates = <0>, <198000000>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	max-frequency = <25000000>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&reg_module_3v3>;
-	wakeup-source;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
deleted file mode 100644
index fde8a19aac0f7..0000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ /dev/null
@@ -1,773 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-#include "imx6ull.dtsi"
-
-/ {
-	/* Ethernet aliases to ensure correct MAC addresses */
-	aliases {
-		ethernet0 = &fec2;
-		ethernet1 = &fec1;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		power-supply = <&reg_3v3>;
-		pwms = <&pwm4 0 5000000 1>;
-		status = "disabled";
-	};
-
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_usbc_det>;
-		id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
-		label = "USBC";
-		self-powered;
-		type = "micro";
-
-		port {
-			usb_dr_connector: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
-
-		key-wakeup {
-			debounce-interval = <10>;
-			gpios = <&gpio5 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
-			label = "Wake-Up";
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
-	};
-
-	panel_dpi: panel-dpi {
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3>;
-		status = "disabled";
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_module_3v3_avdd: regulator-module-3v3-avdd {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-name = "+V3.3_AVDD_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_sd1_vqmmc: regulator-sd1-vqmmc {
-		compatible = "regulator-gpio";
-		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
-		regulator-always-on;
-		regulator-name = "+V3.3_1.8_SD";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		states = <1800000 0x1 3300000 0x0>;
-		vin-supply = <&reg_module_3v3>;
-	};
-
-	reg_eth_phy: regulator-eth-phy {
-		compatible = "regulator-fixed-clock";
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "+V3.3_ETH";
-		regulator-type = "voltage";
-		vin-supply = <&reg_module_3v3>;
-		clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
-		startup-delay-us = <150000>;
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_module_3v3_avdd>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc1>;
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
-};
-
-/* Colibri SPI */
-&ecspi1 {
-	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
-};
-
-/* Ethernet */
-&fec2 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_enet2>;
-	pinctrl-1 = <&pinctrl_enet2_sleep>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	phy-supply = <&reg_eth_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@2 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			max-speed = <100>;
-			reg = <2>;
-		};
-	};
-};
-
-/* NAND */
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	fsl,use-minimum-ecc;
-	nand-on-flash-bbt;
-	nand-ecc-mode = "hw";
-	nand-ecc-strength = <8>;
-	nand-ecc-step-size = <512>;
-	status = "okay";
-};
-
-/* I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */
-&i2c1 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "disabled";
-
-	/* Atmel maxtouch controller */
-	atmel_mxt_ts: touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>;
-		reg = <0x4a>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;       /* SODIMM 107 / INT */
-		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;    /* SODIMM 106 / RST */
-		status = "disabled";
-	};
-};
-
-/*
- * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
- */
-&i2c2 {
-	/* Use low frequency to compensate for the high pull-up values. */
-	clock-frequency = <40000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	ad7879_ts: touchscreen@2c {
-		compatible = "adi,ad7879-1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_ad7879_int>;
-		reg = <0x2c>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-max-pressure = <4096>;
-		adi,resistance-plate-x = <120>;
-		adi,first-conversion-delay = /bits/ 8 <3>;
-		adi,acquisition-time = /bits/ 8 <1>;
-		adi,median-filter-size = /bits/ 8 <2>;
-		adi,averaging = /bits/ 8 <1>;
-		adi,conversion-interval = /bits/ 8 <255>;
-		status = "disabled";
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-	status = "disabled";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&lcd_panel_in>;
-		};
-	};
-};
-
-/* PWM <A> */
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-};
-
-/* PWM <B> */
-&pwm5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm5>;
-};
-
-/* PWM <C> */
-&pwm6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm6>;
-};
-
-/* PWM <D> */
-&pwm7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm7>;
-};
-
-&sdma {
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "disabled";
-};
-
-/* Colibri UART_A */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-};
-
-/* Colibri UART_B */
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-};
-
-/* Colibri UART_C */
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	fsl,dte-mode;
-};
-
-/* Colibri USBC */
-&usbotg1 {
-	dr_mode = "otg";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	usb-role-switch;
-
-	port {
-		usb1_drd_sw: endpoint {
-			remote-endpoint = <&usb_dr_connector>;
-		};
-	};
-};
-
-/* Colibri USBH */
-&usbotg2 {
-	dr_mode = "host";
-};
-
-/* Colibri MMC/SD */
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
-	pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd_sleep>;
-	assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
-	assigned-clock-rates = <0>, <198000000>;
-	bus-width = <4>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */
-	disable-wp;
-	keep-power-in-suspend;
-	no-1-8-v;
-	vqmmc-supply = <&reg_sd1_vqmmc>;
-	wakeup-source;
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_adc1: adc1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00        0x3000 /* SODIMM 8 */
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01        0x3000 /* SODIMM 6 */
-			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08        0x3000 /* SODIMM 4 */
-			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x3000 /* SODIMM 2 */
-		>;
-	};
-
-	pinctrl_atmel_adap: atmeladapgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DQS__GPIO4_IO16          0xb0a0  /* SODIMM 28 */
-			MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05       0xb0a0  /* SODIMM 30 */
-		>;
-	};
-
-	pinctrl_atmel_conn: atmelconngrp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_MOD__GPIO1_IO10          0xb0a0  /* SODIMM 106 */
-		>;
-	};
-
-	pinctrl_can_int: canintgrp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x13010	/* SODIMM 73 */
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-		>;
-	};
-
-	pinctrl_enet2_sleep: enet2-sleepgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x0
-			MX6UL_PAD_GPIO1_IO07__GPIO1_IO07	0x0
-			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x0
-			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x0
-			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x0
-			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0
-			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x0
-			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x0
-		>;
-	};
-
-	pinctrl_ecspi1_cs: ecspi1csgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x70a0	/* SODIMM 86 */
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0	/* SODIMM 88 */
-			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0 /* SODIMM 92 */
-			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100a0 /* SODIMM 90 */
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
-			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_gpio_bl_on: gpioblongrp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x30a0	/* SODIMM 71 */
-		>;
-	};
-
-	pinctrl_gpio1: gpio1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x10b0 /* SODIMM 77 */
-			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x70a0 /* SODIMM 99 */
-			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x10b0 /* SODIMM 133 */
-			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x10b0 /* SODIMM 135 */
-			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x10b0 /* SODIMM 100 */
-			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x70a0 /* SODIMM 102 */
-			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07	0x10b0 /* SODIMM 104 */
-			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x10b0 /* SODIMM 186 */
-		>;
-	};
-
-	pinctrl_gpio2: gpio2grp { /* Camera */
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x10b0 /* SODIMM 69 */
-			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x10b0 /* SODIMM 75 */
-			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x10b0 /* SODIMM 85 */
-			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x10b0 /* SODIMM 96 */
-			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x10b0 /* SODIMM 98 */
-		>;
-	};
-
-	pinctrl_gpio3: gpio3grp { /* CAN2 */
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x10b0 /* SODIMM 178 */
-			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x10b0 /* SODIMM 188 */
-		>;
-	};
-
-	pinctrl_gpio4: gpio4grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x10b0 /* SODIMM 65 */
-		>;
-	};
-
-	pinctrl_gpio6: gpio6grp { /* Wifi pins */
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x10b0 /* SODIMM 89 */
-			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0 /* SODIMM 79 */
-			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0 /* SODIMM 81 */
-			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x10b0 /* SODIMM 97 */
-			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0 /* SODIMM 101 */
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0 /* SODIMM 103 */
-			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x10b0 /* SODIMM 94 */
-		>;
-	};
-
-	pinctrl_gpio7: gpio7grp { /* CAN1 */
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0xb0b0/* SODIMM 55 */
-			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0xb0b0 /* SODIMM 63 */
-		>;
-	};
-
-	/*
-	 * With an eMMC instead of a raw NAND device the following pins
-	 * are available at SODIMM pins.
-	 */
-	pinctrl_gpmi_gpio: gpmigpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x10b0 /* SODIMM 140 */
-			MX6UL_PAD_NAND_CE0_B__GPIO4_IO13	0x10b0 /* SODIMM 144 */
-			MX6UL_PAD_NAND_CLE__GPIO4_IO15		0x10b0 /* SODIMM 146 */
-			MX6UL_PAD_NAND_READY_B__GPIO4_IO12	0x10b0 /* SODIMM 142 */
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
-			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x100a9
-			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x100a9
-			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x100a9
-			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x100a9
-			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x100a9
-			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x100a9
-			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x100a9
-			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x100a9
-			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x100a9
-			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x100a9
-			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x100a9
-			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x100a9
-			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x100a9
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0	/* SODIMM 196 */
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0	/* SODIMM 194 */
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1-gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0	/* SODIMM 196 */
-			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0	/* SODIMM 194 */
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b0
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b0
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2-gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001f8b0
-			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001f8b0
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079	/* SODIMM 76 */
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079	/* SODIMM 70 */
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079	/* SODIMM 60 */
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079	/* SODIMM 58 */
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079	/* SODIMM 78 */
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079	/* SODIMM 72 */
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079	/* SODIMM 80 */
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079	/* SODIMM 46 */
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079	/* SODIMM 62 */
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079	/* SODIMM 48 */
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079	/* SODIMM 74 */
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079	/* SODIMM 50 */
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079	/* SODIMM 52 */
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079	/* SODIMM 54 */
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079	/* SODIMM 66 */
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079	/* SODIMM 64 */
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079	/* SODIMM 57 */
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079	/* SODIMM 61 */
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079	/* SODIMM 56 */
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079	/* SODIMM 44 */
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x00079	/* SODIMM 68 */
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x00079	/* SODIMM 82 */
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079		/* SODIMM 59 */
-		>;
-	};
-
-	pinctrl_pwm5: pwm5grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079		/* SODIMM 28 */
-		>;
-	};
-
-	pinctrl_pwm6: pwm6grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079		/* SODIMM 30 */
-		>;
-	};
-
-	pinctrl_pwm7: pwm7grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079	/* SODIMM 67 */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1	/* SODIMM 33 */
-			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1	/* SODIMM 35 */
-			MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS	0x1b0b1	/* SODIMM 27 */
-			MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS	0x1b0b1	/* SODIMM 25 */
-		>;
-	};
-
-	pinctrl_uart1_ctrl1: uart1ctrl1grp { /* Additional DTR, DCD */
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x70a0 /* SODIMM 31 / DCD */
-			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x10b0 /* SODIMM 29 / DSR */
-			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x90b1 /* SODIMM 23 / DTR */
-			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x10b0 /* SODIMM 37 / RI */
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1 /* SODIMM 36 */
-			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1 /* SODIMM 38 */
-			MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS	0x1b0b1 /* SODIMM 32 */
-			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1 /* SODIMM 34 */
-		>;
-	};
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1 /* SODIMM 19 */
-			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1 /* SODIMM 21 */
-		>;
-	};
-
-	pinctrl_usbh_reg: usbhreggrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x10b0 /* SODIMM 129 / USBH_PEN */
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059 /* SODIMM 47 */
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059 /* SODIMM 190 */
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059 /* SODIMM 192 */
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059 /* SODIMM 49 */
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059 /* SODIMM 51 */
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059 /* SODIMM 53 */
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17069
-			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17069
-			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17069
-			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17069
-			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17069
-			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10069
-
-			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x10
-		>;
-	};
-
-	pinctrl_usdhc2emmc: usdhc2emmcgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
-		>;
-	};
-};
-
-&iomuxc_snvs {
-	pinctrl_atmel_snvs_conn: atmelsnvsconngrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
-		>;
-	};
-
-	pinctrl_snvs_gpio1: snvsgpio1grp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
-			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x110a0	/* SODIMM 95 */
-			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x1b0a0	/* SODIMM 105 */
-			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0a0	/* SODIMM 131 / USBH_OC */
-			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x110a0	/* SODIMM 138 */
-		>;
-	};
-
-	pinctrl_snvs_gpio3: snvsgpio3grp { /* Wifi pins */
-		fsl,pins = <
-			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0	/* SODIMM 127 */
-		>;
-	};
-
-	pinctrl_snvs_ad7879_int: snvsad7879intgrp { /* TOUCH Interrupt */
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x100b0
-		>;
-	};
-
-	pinctrl_snvs_reg_sd: snvsregsdgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400100b0
-		>;
-	};
-
-	pinctrl_snvs_usbc_det: snvsusbcdetgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x130b0
-		>;
-	};
-
-	pinctrl_snvs_gpiokeys: snvsgpiokeysgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 / WAKE_UP */
-		>;
-	};
-
-	pinctrl_snvs_usdhc1_cd: snvsusdhc1cdgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0a0 /* SODIMM 43 / MMC_CD */
-		>;
-	};
-
-	pinctrl_snvs_usdhc1_cd_sleep: snvsusdhc1cd-sleepgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0
-		>;
-	};
-
-	pinctrl_snvs_wifi_pdn: snvswifipdngrp {
-		fsl,pins = <
-			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-dhcom-drc02.dts b/arch/arm/boot/dts/imx6ull-dhcom-drc02.dts
deleted file mode 100644
index b539975a872cd..0000000000000
--- a/arch/arm/boot/dts/imx6ull-dhcom-drc02.dts
+++ /dev/null
@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
-/*
- * Copyright (C) 2023 DH electronics GmbH
- *
- * DHCOM iMX6ULL variant:
- * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2
- * DHCOR PCB number: 578-200 or newer
- * DHCOM PCB number: 579-200 or newer
- * DRC02 PCB number: 568-100 or newer (2nd ethernet by SoM)
- */
-/dts-v1/;
-
-#include "imx6ull-dhcom-som.dtsi"
-#include "imx6ull-dhcom-som-cfg-sdcard.dtsi"
-
-/ {
-	model = "DH electronics i.MX6ULL DHCOM on DRC02";
-	compatible = "dh,imx6ull-dhcom-drc02", "dh,imx6ull-dhcom-som",
-		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
-};
-
-/*
- * The signals for CAN2 TX and RX are routed to the DHCOM UART1 RTS/CTS pins.
- * Therefore the UART RTS/CTS must be output on other DHCOM pins, see uart1
- * node below.
- */
-&can2 {
-	status = "okay";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "DRC02-In2",
-		"", "", "", "",
-		"", "", "DHCOM-I", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "DRC02-HW0", "DRC02-HW1", "DHCOM-M",
-		"DRC02-HW2", "DHCOM-U", "DHCOM-T", "DHCOM-S",
-		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
-		"DHCOM-N", "", "", "";
-	/*
-	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
-	 * GPIO line, however the i.MX6ULL UART driver assumes RX happens
-	 * during TX anyway and that it only controls drive enable DE
-	 * line. Hence, the RX is always enabled here.
-	 */
-	rs485-rx-en-hog {
-		gpio-hog;
-		gpios = <25 0>; /* GPIO Q */
-		line-name = "rs485-rx-en";
-		output-low;
-	};
-};
-
-&gpio5 {
-	gpio-line-names =
-		"DHCOM-A", "DHCOM-B", "DHCOM-C", "DRC02-Out2",
-		"DHCOM-E", "", "", "DRC02-Out1",
-		"DRC02-In1", "DHCOM-H", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-/* DHCOM I2C2 */
-&i2c1 {
-	eeprom@56 {
-		compatible = "atmel,24c04";
-		reg = <0x56>;
-		pagesize = <16>;
-	};
-};
-
-&uart1 {
-	/delete-property/ uart-has-rtscts;
-	rts-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
-	cts-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; /* GPIO M */
-};
-
-/* Use UART as RS485 */
-&uart2 {
-	/delete-property/ uart-has-rtscts;
-	linux,rs485-enabled-at-boot-time;
-	rts-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* GPIO P */
-};
diff --git a/arch/arm/boot/dts/imx6ull-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6ull-dhcom-pdk2.dts
deleted file mode 100644
index b29713831a744..0000000000000
--- a/arch/arm/boot/dts/imx6ull-dhcom-pdk2.dts
+++ /dev/null
@@ -1,222 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
-/*
- * Copyright (C) 2023 DH electronics GmbH
- *
- * DHCOM iMX6ULL variant:
- * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-RTC-WBT-ADC-I-01D2
- * DHCOR PCB number: 578-200 or newer
- * DHCOM PCB number: 579-200 or newer
- * PDK2 PCB number: 516-400 or newer
- */
-/dts-v1/;
-
-#include "imx6ull-dhcom-som.dtsi"
-
-/ {
-	model = "DH electronics i.MX6ULL DHCOM on Premium Developer Kit (2)";
-	compatible = "dh,imx6ull-dhcom-pdk2", "dh,imx6ull-dhcom-som",
-		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
-
-	clk_ext_audio_codec: clock-codec {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-	};
-
-	display_bl: display-bl {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
-		default-brightness-level = <8>;
-		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; /* GPIO G */
-		power-supply = <&reg_panel_3v3>;
-		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-0 {
-			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* GPIO A */
-			label = "TA1-GPIO-A";
-			linux,code = <KEY_A>;
-			wakeup-source;
-		};
-
-		button-1 {
-			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; /* GPIO B */
-			label = "TA2-GPIO-B";
-			linux,code = <KEY_B>;
-			wakeup-source;
-		};
-
-		button-2 {
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
-			label = "TA3-GPIO-C";
-			linux,code = <KEY_C>;
-			wakeup-source;
-		};
-
-		button-3 {
-			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; /* GPIO D */
-			label = "TA4-GPIO-D";
-			linux,code = <KEY_D>;
-			wakeup-source;
-		};
-	};
-
-	led: led {
-		compatible = "gpio-leds";
-
-		/*
-		 * Disable PDK2 LED5, because GPIO E is
-		 * already used as touch interrupt.
-		 */
-		led-0 {
-			color = <LED_COLOR_ID_GREEN>;
-			default-state = "off";
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <5>; /* PDK2 LED5 */
-			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; /* GPIO E */
-			status = "disabled";
-		};
-
-		led-1 {
-			color = <LED_COLOR_ID_GREEN>;
-			default-state = "off";
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <6>; /* PDK2 LED6 */
-			gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; /* GPIO F */
-		};
-
-		/*
-		 * Disable PDK2 LED7, because GPIO H is
-		 * already used for WiFi pin WL_REG_ON.
-		 */
-		led-2 {
-			color = <LED_COLOR_ID_GREEN>;
-			default-state = "off";
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <7>; /* PDK2 LED7 */
-			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* GPIO H */
-			status = "disabled";
-		};
-
-		/*
-		 * Disable PDK2 LED8, because GPIO I is
-		 * already used for BT pin BT_REG_ON.
-		 */
-		led-3 {
-			color = <LED_COLOR_ID_GREEN>;
-			default-state = "off";
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <8>; /* PDK2 LED8 */
-			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
-			status = "disabled";
-		};
-	};
-
-	panel {
-		compatible = "edt,etm0700g0edh6";
-		backlight = <&display_bl>;
-		power-supply = <&reg_panel_3v3>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	/* Filtered supply voltage */
-	reg_pdk2_24v: regulator-pdk2-24v {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <24000000>;
-		regulator-min-microvolt = <24000000>;
-		regulator-name = "24V_PDK2";
-	};
-
-	/* PDK2 U35 */
-	reg_pdk2_3v3: regulator-pdk2-3v3 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "3V3_PDK2";
-		vin-supply = <&reg_pdk2_24v>;
-	};
-
-	/* 560-200 U1 */
-	reg_panel_3v3: regulator-panel-3v3 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "3V3_PANEL";
-		vin-supply = <&reg_pdk2_24v>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,format = "i2s";
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,name = "sgtl5000";
-		simple-audio-card,routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT";
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Line", "Line In Jack",
-			"Headphone", "Headphone Jack";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			clocks = <&clk_ext_audio_codec>;
-			sound-dai = <&sgtl5000>;
-		};
-	};
-};
-
-/* DHCOM I2C1 */
-&i2c2 {
-	sgtl5000: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		clocks = <&clk_ext_audio_codec>;
-		VDDA-supply = <&reg_pdk2_3v3>;
-		VDDIO-supply = <&reg_pdk2_3v3>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5406";
-		reg = <0x38>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-		power-supply = <&reg_panel_3v3>;
-	};
-};
-
-&lcdif {
-	status = "okay";
-
-	port {
-		lcd_display_out: endpoint {
-			remote-endpoint = <&lcd_panel_in>;
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&sai2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-dhcom-picoitx.dts b/arch/arm/boot/dts/imx6ull-dhcom-picoitx.dts
deleted file mode 100644
index e4cc2223583aa..0000000000000
--- a/arch/arm/boot/dts/imx6ull-dhcom-picoitx.dts
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
-/*
- * Copyright (C) 2023 DH electronics GmbH
- *
- * DHCOM iMX6ULL variant:
- * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2
- * DHCOR PCB number: 578-200 or newer
- * DHCOM PCB number: 579-200 or newer
- * PicoITX PCB number: 487-600 or newer
- */
-/dts-v1/;
-
-#include "imx6ull-dhcom-som.dtsi"
-#include "imx6ull-dhcom-som-cfg-sdcard.dtsi"
-
-/ {
-	model = "DH electronics i.MX6ULL DHCOM on PicoITX";
-	compatible = "dh,imx6ull-dhcom-picoitx", "dh,imx6ull-dhcom-som",
-		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
-
-	led {
-		compatible = "gpio-leds";
-
-		led-0 {
-			color = <LED_COLOR_ID_YELLOW>;
-			default-state = "off";
-			function = LED_FUNCTION_INDICATOR;
-			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
-		};
-	};
-};
-
-&fec1 {
-	phy-handle = <&mdio1_phy0>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mdio1_phy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
-				     "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			clock-names = "rmii-ref";
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-			pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>;
-			pinctrl-names = "default";
-			reset-assert-us = <500>;
-			reset-deassert-us = <500>;
-			reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-			smsc,disable-energy-detect; /* Make plugin detection reliable */
-		};
-	};
-};
-
-&fec2 {
-	status = "disabled";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "PicoITX-HW2", "PicoITX-HW1", "DHCOM-M",
-		"PicoITX-HW0", "DHCOM-U", "DHCOM-T", "DHCOM-S",
-		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
-		"DHCOM-N", "", "", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"DHCOM-A", "DHCOM-B", "PicoITX-In2", "PicoITX-Out2",
-		"PicoITX-In1", "", "", "PicoITX-Out1",
-		"DHCOM-G", "DHCOM-H", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&iomuxc {
-	pinctrl_fec1: fec1-grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-dhcom-som-cfg-sdcard.dtsi b/arch/arm/boot/dts/imx6ull-dhcom-som-cfg-sdcard.dtsi
deleted file mode 100644
index 040421f9c9700..0000000000000
--- a/arch/arm/boot/dts/imx6ull-dhcom-som-cfg-sdcard.dtsi
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
-/*
- * Copyright (C) 2023 DH electronics GmbH
- */
-
-/*
- * Special SoM configuration: SD card
- *
- * Enabled:  Micro SD card on module or
- *           external SD card via DHCOM depends on hardware variant
- *           GPIO H and GPIO I will be available
- *           DHCOM UART2 will be available
- * Disabled: WiFi and BT
- */
-
-/*
- * To use usdhc1 as SD card, the WiFi node must be deleted.
- * BT is also not available, so remove BT from the UART node.
- */
-/delete-node/ &brcmf;
-/delete-node/ &bluetooth;
-
-/ {
-	aliases {
-		mmc1 = &usdhc1;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-	};
-
-	reg_sd1_vmmc: regulator-sd1-vmmc {
-		compatible = "regulator-fixed";
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "VSD_3V3";
-	};
-};
-
-/* Micro SD card on module or external SD card via DHCOM */
-&usdhc1 {
-	/delete-property/ #address-cells;
-	/delete-property/ #size-cells;
-	/delete-property/ keep-power-in-suspend;
-	/delete-property/ mmc-pwrseq;
-	/delete-property/ non-removable;
-	/delete-property/ wakeup-source;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	vmmc-supply = <&reg_sd1_vmmc>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc1: usdhc1-grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
-
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi
deleted file mode 100644
index 17837663c0b0d..0000000000000
--- a/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi
+++ /dev/null
@@ -1,633 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
-/*
- * Copyright (C) 2023 DH electronics GmbH
- */
-
-#include "imx6ull-dhcor-som.dtsi"
-
-/ {
-	aliases {
-		/delete-property/ mmc0; /* Avoid double definitions */
-		/delete-property/ mmc1;
-		/delete-property/ spi2;
-		/delete-property/ spi3;
-		i2c0 = &i2c2;
-		i2c1 = &i2c1;
-		mmc2 = &usdhc2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-		serial0 = &uart1;
-		serial1 = &uart6; /* DHCOM UART2, special hardware required */
-		serial2 = &uart3;
-		serial3 = &uart2; /* Use BT UART always as ttymxc3 */
-		serial4 = &uart4;
-		serial5 = &uart5;
-		spi0 = &ecspi1;
-		spi1 = &ecspi4; /* DHCOM SPI2, special hardware required */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reg_ext_3v3_ref: regulator-ext-3v3-ref {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "VCC_3V3_REF";
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "usb-otg1-vbus";
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "usb-otg2-vbus";
-	};
-
-	/* SoM with WiFi/BT: WiFi pin WL_REG_ON is connected to a DHCOM GPIO */
-	/omit-if-no-ref/ usdhc1_pwrseq: usdhc1-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; /* GPIO H */
-	};
-};
-
-/* SoM with WiFi/BT: BT pin BT_REG_ON is connected to a DHCOM GPIO */
-&bluetooth {
-	shutdown-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
-};
-
-&can1 {
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-/*
- * The signals for CAN2 TX and RX are routed to the DHCOM UART1 RTS/CTS pins.
- * Only if this pins are used as CAN interface enable it on board layer.
- */
-&can2 {
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	pinctrl-names = "default";
-};
-
-/* DHCOM SPI1 */
-&ecspi1 {
-	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-/*
- * DHCOM SPI2
- * Special hardware required that uses the pins of FEC2. Therefore this SPI
- * interface can only be used if FEC2 is disabled.
- */
-&ecspi4 {
-	cs-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	pinctrl-names = "default";
-};
-
-/* DHCOM ETH1 */
-&fec1 {
-	phy-handle = <&mdio2_phy0>;
-	phy-mode = "rmii";
-	pinctrl-0 = <&pinctrl_fec1>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-/* DHCOM ETH2 */
-&fec2 {
-	phy-handle = <&mdio2_phy1>;
-	phy-mode = "rmii";
-	pinctrl-0 = <&pinctrl_fec2>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mdio2_phy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
-				     "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			clock-names = "rmii-ref";
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-			pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>;
-			pinctrl-names = "default";
-			reset-assert-us = <500>;
-			reset-deassert-us = <500>;
-			reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-			smsc,disable-energy-detect; /* Make plugin detection reliable */
-		};
-
-		mdio2_phy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
-				     "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-			clock-names = "rmii-ref";
-			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
-			pinctrl-0 = <&pinctrl_fec2_phy &pinctrl_snvs_fec2_phy>;
-			pinctrl-names = "default";
-			reset-assert-us = <500>;
-			reset-deassert-us = <500>;
-			reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-			smsc,disable-energy-detect; /* Make plugin detection reliable */
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "DHCOM-INT",
-		"", "", "", "",
-		"", "", "DHCOM-I", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-	pinctrl-0 = <&pinctrl_spi1_switch
-		     &pinctrl_dhcom_i &pinctrl_dhcom_int>;
-	pinctrl-names = "default";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "DHCOM-L", "DHCOM-K", "DHCOM-M",
-		"DHCOM-J", "DHCOM-U", "DHCOM-T", "DHCOM-S",
-		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
-		"DHCOM-N", "", "", "";
-	pinctrl-0 = <&pinctrl_dhcom_j &pinctrl_dhcom_k
-		     &pinctrl_dhcom_l &pinctrl_dhcom_m
-		     &pinctrl_dhcom_n &pinctrl_dhcom_o
-		     &pinctrl_dhcom_p &pinctrl_dhcom_q
-		     &pinctrl_dhcom_r &pinctrl_dhcom_s
-		     &pinctrl_dhcom_t &pinctrl_dhcom_u>;
-	pinctrl-names = "default";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"DHCOM-A", "DHCOM-B", "DHCOM-C", "DHCOM-D",
-		"DHCOM-E", "", "", "DHCOM-F",
-		"DHCOM-G", "DHCOM-H", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-	pinctrl-0 = <&pinctrl_snvs_dhcom_a &pinctrl_snvs_dhcom_b
-		     &pinctrl_snvs_dhcom_c &pinctrl_snvs_dhcom_d
-		     &pinctrl_snvs_dhcom_e &pinctrl_snvs_dhcom_f
-		     &pinctrl_snvs_dhcom_g &pinctrl_snvs_dhcom_h>;
-	pinctrl-names = "default";
-};
-
-/* DHCOM I2C2 */
-&i2c1 {
-	rtc_i2c: rtc@32 {
-		compatible = "microcrystal,rv8803";
-		reg = <0x32>;
-	};
-
-	/* Microchip 24AA025E48T-I/OT containing MAC for DHCOM ETH1 */
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	/* TI ADC101C027 */
-	adc@51 {
-		compatible = "ti,adc101c";
-		reg = <0x51>;
-		vref-supply = <&reg_ext_3v3_ref>;
-	};
-
-	/* TI ADC101C027 */
-	adc@52 {
-		compatible = "ti,adc101c";
-		reg = <0x52>;
-		vref-supply = <&reg_ext_3v3_ref>;
-	};
-
-	/* Microchip 24AA025E48T-I/OT containing MAC for DHCOM ETH2 */
-	eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-};
-
-/* DHCOM I2C1 */
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	pinctrl-names = "default", "gpio";
-	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-0 = <&pinctrl_lcdif>;
-	pinctrl-names = "default";
-};
-
-&pwm1 {
-	pinctrl-0 = <&pinctrl_pwm1>;
-	pinctrl-names = "default";
-};
-
-&sai2 {
-	assigned-clock-rates = <320000000>;
-	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
-	pinctrl-0 = <&pinctrl_sai2>;
-	pinctrl-names = "default";
-};
-
-&tsc {
-	measure-delay-time = <0xffff>;
-	pinctrl-0 = <&pinctrl_tsc>;
-	pinctrl-names = "default";
-	pre-charge-time = <0xfff>;
-	touchscreen-average-samples = <32>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-};
-
-/* DHCOM UART1 */
-&uart1 {
-	pinctrl-0 = <&pinctrl_uart1>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-/*
- * DHCOM UART2 (alternative)
- * Special hardware required that uses DHCOM GPIO pins for DHCOM UART2.
- * Therefore this UART interface can only be used if DHCOM GPIOs J/K/L/M are
- * removed from GPIO hog muxing.
- */
-&uart6 {
-	pinctrl-0 = <&pinctrl_uart6>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-};
-
-&usbotg1 {
-	adp-disable;
-	disable-over-current;
-	dr_mode = "otg";
-	hnp-disable;
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	pinctrl-names = "default";
-	srp-disable;
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	disable-over-current; /* Overcurrent pin is used for TSC */
-	dr_mode = "host";
-	pinctrl-0 = <&pinctrl_usbotg2>;
-	pinctrl-names = "default";
-	tpl-support;
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	status = "okay";
-};
-
-&usbphy1 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usbphy2 {
-	fsl,tx-d-cal = <106>;
-};
-
-/* WiFi on LGA */
-&usdhc1 {
-	mmc-pwrseq = <&usdhc1_pwrseq>;
-};
-
-/* eMMC on module */
-&usdhc2 {
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-names = "default";
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vcc_3v3>;
-	status = "okay";
-};
-
-&iomuxc {
-	/* DHCOM GPIOs I..U + INT_HIGHEST_PRIORITY */
-	pinctrl_dhcom_i: dhcom-i-grp {
-		fsl,pins = <MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x400120b0>;
-	};
-
-	pinctrl_dhcom_j: dhcom-j-grp {
-		fsl,pins = <MX6UL_PAD_CSI_HSYNC__GPIO4_IO20	0x400120b0>;
-	};
-
-	pinctrl_dhcom_k: dhcom-k-grp {
-		fsl,pins = <MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x400120b0>;
-	};
-
-	pinctrl_dhcom_l: dhcom-l-grp {
-		fsl,pins = <MX6UL_PAD_CSI_MCLK__GPIO4_IO17	0x400120b0>;
-	};
-
-	pinctrl_dhcom_m: dhcom-m-grp {
-		fsl,pins = <MX6UL_PAD_CSI_VSYNC__GPIO4_IO19	0x400120b0>;
-	};
-
-	pinctrl_dhcom_n: dhcom-n-grp {
-		fsl,pins = <MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x400120b0>;
-	};
-
-	pinctrl_dhcom_o: dhcom-o-grp {
-		fsl,pins = <MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x400120b0>;
-	};
-
-	pinctrl_dhcom_p: dhcom-p-grp {
-		fsl,pins = <MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x400120b0>;
-	};
-
-	pinctrl_dhcom_q: dhcom-q-grp {
-		fsl,pins = <MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x400120b0>;
-	};
-
-	pinctrl_dhcom_r: dhcom-r-grp {
-		fsl,pins = <MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x400120b0>;
-	};
-
-	pinctrl_dhcom_s: dhcom-s-grp {
-		fsl,pins = <MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x400120b0>;
-	};
-
-	pinctrl_dhcom_t: dhcom-t-grp {
-		fsl,pins = <MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x400120b0>;
-	};
-
-	pinctrl_dhcom_u: dhcom-u-grp {
-		fsl,pins = <MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x400120b0>;
-	};
-
-	pinctrl_dhcom_int: dhcom-int-grp {
-		fsl,pins = <MX6UL_PAD_JTAG_TMS__GPIO1_IO11	0x400120b0>;
-	};
-
-	pinctrl_ecspi1: ecspi1-grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100b1
-			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x100b1
-			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x100b1
-			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x1b0b0 /* SS0 */
-		>;
-	};
-
-	pinctrl_ecspi4: ecspi4-grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO	0x100b1
-			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI	0x100b1
-			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK	0x100b1
-			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0 /* SS0 */
-		>;
-	};
-
-	pinctrl_fec1: fec1-grp {
-		fsl,pins = <
-			/* FEC1 uses MDIO bus from FEC2 */
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
-		>;
-	};
-
-	pinctrl_fec1_phy: fec1-phy-grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0xb0 /* SMSC PHY reset */
-		>;
-	};
-
-	pinctrl_fec2: fec2-grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
-		>;
-	};
-
-	pinctrl_fec2_phy: fec2-phy-grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA19__GPIO3_IO24	0xb0 /* SMSC PHY reset */
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_i2c2: i2c2-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2-gpio-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x4001b8b0
-		>;
-	};
-
-	pinctrl_lcdif: lcdif-grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
-		>;
-	};
-
-	pinctrl_pwm1: pwm1-grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO08__PWM1_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_sai2: sai2-grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
-			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
-			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
-			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
-		>;
-	};
-
-	pinctrl_tsc: tsc-grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
-		>;
-	};
-
-	pinctrl_uart1: uart1-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart6: uart6-grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
-			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
-			MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS	0x1b0b1
-			MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1-grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
-		>;
-	};
-
-	pinctrl_usbotg2: usbotg2-grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x120b0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2-grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
-			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x17059 /* SD2 Reset */
-		>;
-	};
-};
-
-&iomuxc_snvs {
-	/* DHCOM GPIOs A..H */
-	pinctrl_snvs_dhcom_a: snvs-dhcom-a-grp {
-		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x400120b0>;
-	};
-
-	pinctrl_snvs_dhcom_b: snvs-dhcom-b-grp {
-		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x400120b0>;
-	};
-
-	pinctrl_snvs_dhcom_c: snvs-dhcom-c-grp {
-		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x400120b0>;
-	};
-
-	pinctrl_snvs_dhcom_d: snvs-dhcom-d-grp {
-		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x400120b0>;
-	};
-
-	pinctrl_snvs_dhcom_e: snvs-dhcom-e-grp {
-		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x400120b0>;
-	};
-
-	pinctrl_snvs_dhcom_f: snvs-dhcom-f-grp {
-		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x400120b0>;
-	};
-
-	pinctrl_snvs_dhcom_g: snvs-dhcom-g-grp {
-		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x400120b0>;
-	};
-
-	pinctrl_snvs_dhcom_h: snvs-dhcom-h-grp {
-		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400120b0>;
-	};
-
-	pinctrl_snvs_fec1_phy: snvs-fec1-phy-grp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0xb1 /* SMSC PHY Int */
-		>;
-	};
-
-	pinctrl_snvs_fec2_phy: snvs-fec2-phy-grp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0xb1 /* SMSC PHY Int */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi
deleted file mode 100644
index 32a6022625d97..0000000000000
--- a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi
+++ /dev/null
@@ -1,262 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
-/*
- * Copyright (C) 2023 DH electronics GmbH
- */
-
-#include <dt-bindings/clock/imx6ul-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/regulator/dlg,da9063-regulator.h>
-#include "imx6ull.dtsi"
-
-/ {
-	memory@80000000 {
-		/* Appropriate memory size will be filled by U-Boot */
-		reg = <0x80000000 0>;
-		device_type = "memory";
-	};
-};
-
-&cpu0 {
-	/*
-	 * Due to the design as a solderable SOM, there are no capacitors
-	 * below the SoC, therefore higher voltages are required.
-	 */
-	operating-points = <
-		/* kHz	uV */
-		900000	1275000
-		792000	1250000 /* Voltage increased */
-		528000	1175000
-		396000	1025000
-		198000	950000
-	>;
-	fsl,soc-operating-points = <
-		/* KHz	uV */
-		900000	1250000
-		792000	1250000 /* Voltage increased */
-		528000	1175000
-		396000	1175000
-		198000	1175000
-	>;
-};
-
-&gpio1 {
-	pinctrl-0 = <&pinctrl_spi1_switch>;
-	pinctrl-names = "default";
-	/*
-	 * Pin SPI_BOOT_FLASH_EN (GPIO 1.9) is a switch for either using the
-	 * DHCOM SPI1 interface or accessing the SPI bootflash. Both using
-	 * ecspi1, but muxed to different pins. The DHCOM SPI1 interface uses
-	 * the pins PAD_LCD_DATA21..23 and the SPI bootflash uses the pins
-	 * PAD_CSI_DATA04..07. If the SPI bootflash is enabled the pins for
-	 * DHCOM GPIOs N/O/P/Q/R/S/T/U aren't usable anymore, because they
-	 * are used for the bus interface to the SPI bootflash. The GPIOs are
-	 * disconnected by a buffer which is also controlled via the pin
-	 * SPI_BOOT_FLASH_EN. Therefore the access to the bootflash is a
-	 * special case and is disabled by setting GPIO 1.9 to high.
-	 */
-	spi1-switch-hog {
-		gpio-hog;
-		gpios = <9 0>;
-		output-high;
-		line-name = "spi1-switch";
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	pinctrl-names = "default", "gpio";
-	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	pmic@58 {
-		compatible = "dlg,da9061";
-		reg = <0x58>;
-
-		onkey {
-			compatible = "dlg,da9061-onkey", "dlg,da9062-onkey";
-			status = "disabled";
-		};
-
-		regulators {
-			vdd_soc_in_1v4: buck1 {
-				regulator-allowed-modes = <DA9063_BUCK_MODE_SLEEP>; /* PFM */
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SLEEP>;
-				regulator-max-microvolt = <1400000>;
-				regulator-min-microvolt = <1400000>;
-				regulator-name = "vdd_soc_in_1v4";
-			};
-
-			vcc_3v3: buck2 {
-				regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
-				regulator-max-microvolt = <3300000>;
-				regulator-min-microvolt = <3300000>;
-				regulator-name = "vcc_3v3";
-			};
-
-			/*
-			 * The current DRR3 memory can be supplied with a
-			 * voltage of either 1.35V or 1.5V. For reasons of
-			 * backward compatibility to only 1.5V DDR3 memory,
-			 * the voltage is set to 1.5V.
-			 */
-			vcc_ddr_1v35: buck3 {
-				regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
-				regulator-max-microvolt = <1500000>;
-				regulator-min-microvolt = <1500000>;
-				regulator-name = "vcc_ddr_1v35";
-			};
-
-			vcc_2v5: ldo1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <2500000>;
-				regulator-min-microvolt = <2500000>;
-				regulator-name = "vcc_2v5";
-			};
-
-			vdd_snvs_in_3v3: ldo2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3300000>;
-				regulator-min-microvolt = <3300000>;
-				regulator-name = "vdd_snvs_in_3v3";
-			};
-
-			vcc_1v8: ldo3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1800000>;
-				regulator-min-microvolt = <1800000>;
-				regulator-name = "vcc_1v8";
-			};
-
-			vcc_1v2: ldo4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1200000>;
-				regulator-min-microvolt = <1200000>;
-				regulator-name = "vcc_1v2";
-			};
-		};
-
-		thermal {
-			compatible = "dlg,da9061-thermal", "dlg,da9062-thermal";
-			status = "disabled";
-		};
-
-		watchdog {
-			compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog";
-			status = "disabled";
-		};
-	};
-};
-
-&ocotp {
-	/* Don't get write access by default */
-	read-only;
-};
-
-&reg_arm {
-	vin-supply = <&vdd_soc_in_1v4>;
-};
-
-&reg_soc {
-	vin-supply = <&vdd_soc_in_1v4>;
-};
-
-/* BT on LGA (BT_REG_ON is connected to LGA pin E1) */
-&uart2 {
-	pinctrl-0 = <&pinctrl_uart2>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-	status = "okay";
-
-	/*
-	 * Actually, the maximum speed of the chip is 4MBdps, but there are
-	 * limitations that prevent this speed. It hasn't yet been figured out
-	 * what the reason for this is. Currently, the maximum speed of 3MBdps
-	 * can be used without any problems. If the limitation can be overcome,
-	 * the speed can be increased accordingly.
-	 */
-	bluetooth: bluetooth {
-		compatible = "brcm,bcm43430a1-bt"; /* muRata 1DX */
-		max-speed = <3000000>;
-		vbat-supply = <&vcc_3v3>;
-		vddio-supply = <&vcc_3v3>;
-	};
-};
-
-/* WiFi on LGA (WL_REG_ON is connected to LGA pin E3) */
-&usdhc1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	keep-power-in-suspend;
-	pinctrl-0 = <&pinctrl_usdhc1_wifi>;
-	pinctrl-names = "default";
-	wakeup-source;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; /* muRata 1DX */
-		reg = <1>;
-	};
-};
-
-&iomuxc {
-	pinctrl_i2c1: i2c1-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1-gpio-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x4001b8b0
-		>;
-	};
-
-	pinctrl_spi1_switch: spi1-switch-grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x120b0 /* SPI_BOOT_FLASH_EN */
-		>;
-	};
-
-	pinctrl_uart2: uart2-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
-			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1_wifi: usdhc1-wifi-grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x1b0b0
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10010
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x1b0b0
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x1b0b0
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x1b0b0
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-jozacp.dts b/arch/arm/boot/dts/imx6ull-jozacp.dts
deleted file mode 100644
index a152eeb78e882..0000000000000
--- a/arch/arm/boot/dts/imx6ull-jozacp.dts
+++ /dev/null
@@ -1,456 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2020 Protonic Holland
- * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include "imx6ull.dtsi"
-
-/ {
-	model = "JOZ Access Point";
-	compatible = "joz,jozacp", "fsl,imx6ull";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	/* On board name LED_RGB1 */
-	led-controller-1 {
-		compatible = "pwm-leds";
-
-		led-0 {
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <0>;
-			pwms = <&pwm1 0 10000000 0>;
-			max-brightness = <255>;
-		};
-
-		led-1 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <1>;
-			pwms = <&pwm3 0 10000000 0>;
-			max-brightness = <255>;
-		};
-
-		led-2 {
-			color = <LED_COLOR_ID_BLUE>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <2>;
-			pwms = <&pwm5 0 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	/* On board name LED_RGB2 */
-	led-controller-2 {
-		compatible = "pwm-leds";
-
-		led-3 {
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <3>;
-			pwms = <&pwm2 0 10000000 0>;
-			max-brightness = <255>;
-		};
-
-		led-4 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <4>;
-			pwms = <&pwm4 0 10000000 0>;
-			max-brightness = <255>;
-		};
-
-		led-5 {
-			color = <LED_COLOR_ID_BLUE>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <5>;
-			pwms = <&pwm6 0 10000000 0>;
-			max-brightness = <255>;
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&reg_5v0>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_vbus: regulator-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_vbus>;
-		regulator-name = "vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_5v0>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_npd>;
-		reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&cpu0 {
-	clock-frequency = <792000000>;
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			reg = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-			interrupts-extended = <&gpio1 29 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-		};
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&pwm5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm5>;
-	status = "okay";
-};
-
-&pwm6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm6>;
-	status = "okay";
-};
-
-&snvs_rtc {
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	dtr-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	vbus-supply = <&reg_vbus>;
-	dr_mode = "host";
-	over-current-active-low;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	vmmc-supply = <&reg_3v3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	cap-mmc-hw-reset;
-	no-sd;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
-	bus-width = <4>;
-	no-1-8-v;
-	no-mmc;
-	no-sd;
-	non-removable;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b0b0
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC	 0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
-
-			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x038b0
-			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x170b0
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			/* HW Revision */
-			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x1b0b0
-			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x1b0b0
-
-			/* HW ID */
-			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0
-
-			/* Digital inputs */
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x11000
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x11000
-			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x11000
-			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x11000
-			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x11000
-
-			/* Isolated outputs */
-			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x01020
-			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21	0x01020
-			MX6UL_PAD_UART2_RTS_B__GPIO1_IO23	0x01020
-			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x01020
-			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x01020
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001f8b1
-			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001f8b1
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001f8b1
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x01010
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA01__PWM2_OUT		0x01010
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA02__PWM3_OUT		0x01010
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA03__PWM4_OUT		0x01010
-		>;
-	};
-
-	pinctrl_pwm5: pwm5grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA18__PWM5_OUT		0x01010
-		>;
-	};
-
-	pinctrl_pwm6: pwm6grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA19__PWM6_OUT		0x01010
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b0
-			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b0
-			MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS	0x1b0b0
-			MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS	0x1b0b0
-			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x1b0b0
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B	0x17099
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x1f099
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10099
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17099
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17099
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17099
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17099
-			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17099
-			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17099
-			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17099
-			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17099
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x100b9
-			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x170b9
-			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x170b9
-			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x170b9
-			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x170b9
-			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_vbus: vbus0grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x030b0
-		>;
-	};
-
-	pinctrl_wifi_npd: wifigrp {
-		fsl,pins = <
-			/* WL_REG_ON */
-			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x03020
-		>;
-	};
-};
-
-&iomuxc_snvs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_snvs_hog>;
-
-	pinctrl_snvs_hog: snvs-hog-grp {
-		fsl,pins = <
-			/* Digital outputs */
-			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x00020
-			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x00020
-			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x00020
-			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x00020
-			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x00020
-
-			/* Digital outputs fault feedback */
-			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17000
-			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17000
-			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x17000
-			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x17000
-			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x17000
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-bl.dts b/arch/arm/boot/dts/imx6ull-kontron-bl.dts
deleted file mode 100644
index fa016465cdbc2..0000000000000
--- a/arch/arm/boot/dts/imx6ull-kontron-bl.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2019 Kontron Electronics GmbH
- */
-
-/dts-v1/;
-
-#include "imx6ull-kontron-sl.dtsi"
-#include "imx6ul-kontron-bl-common.dtsi"
-
-/ {
-	model = "Kontron BL i.MX6ULL (N641X S)";
-	compatible = "kontron,bl-imx6ull", "kontron,sl-imx6ull", "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi b/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi
deleted file mode 100644
index 93f10eb3494f5..0000000000000
--- a/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-#include "imx6ull.dtsi"
-#include "imx6ul-kontron-sl-common.dtsi"
-
-/ {
-	model = "Kontron SL i.MX6ULL (N641X SOM)";
-	compatible = "kontron,sl-imx6ull", "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
deleted file mode 100644
index 79cc45728cd2d..0000000000000
--- a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2020 Linumiz
- * Author: Parthiban Nallathambi <parthiban@linumiz.com>
- */
-
-/dts-v1/;
-#include "imx6ull.dtsi"
-#include "imx6ull-myir-mys-6ulx.dtsi"
-
-/ {
-	model = "MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND";
-	compatible = "myir,imx6ull-mys-6ulx-eval", "fsl,imx6ull";
-};
-
-&gpmi {
-	fsl,use-minimum-ecc;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi
deleted file mode 100644
index d03694feaf5c4..0000000000000
--- a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2020 Linumiz
- * Author: Parthiban Nallathambi <parthiban@linumiz.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "MYiR MYS-6ULX Single Board Computer";
-	compatible = "fsl,imx6ull";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	reg_vdd_5v: regulator-vdd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_vdd_3v3: regulator-vdd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&reg_vdd_5v>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	phy-supply = <&reg_vdd_3v3>;
-	status = "okay";
-
-	mdio: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			reg = <0>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_vdd_3v3>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	keep-power-in-suspend;
-	vmmc-supply = <&reg_vdd_3v3>;
-};
-
-&iomuxc {
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
-			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
-			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
-			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
-			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
-			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
-			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
-			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
-			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
-			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
-			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
-			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
-			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
-			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
-			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
-			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usb_otg1_id: usbotg1idgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ull-opos6ul.dtsi
deleted file mode 100644
index 155f941f2811d..0000000000000
--- a/arch/arm/boot/dts/imx6ull-opos6ul.dtsi
+++ /dev/null
@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2019 Armadeus Systems <support@armadeus.com>
-
-#include "imx6ull.dtsi"
-#include "imx6ul-imx6ull-opos6ul.dtsi"
diff --git a/arch/arm/boot/dts/imx6ull-opos6uldev.dts b/arch/arm/boot/dts/imx6ull-opos6uldev.dts
deleted file mode 100644
index 198fdb72641bb..0000000000000
--- a/arch/arm/boot/dts/imx6ull-opos6uldev.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright 2019 Armadeus Systems <support@armadeus.com>
-
-/dts-v1/;
-#include "imx6ull-opos6ul.dtsi"
-#include "imx6ul-imx6ull-opos6uldev.dtsi"
-
-/ {
-	model = "Armadeus Systems OPOS6UL SoM (i.MX6ULL) on OPOS6ULDev board";
-	compatible = "armadeus,imx6ull-opos6uldev", "armadeus,imx6ull-opos6ul", "fsl,imx6ull";
-};
-
-&iomuxc_snvs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_tamper_gpios>;
-
-	pinctrl_tamper_gpios: tampergpiosgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0b0b0
-			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x0b0b0
-			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
-			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
-			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0
-			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0
-			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x0b0b0
-			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x0b0b0
-		>;
-	};
-
-	pinctrl_usbotg2_vbus: usbotg2vbusgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x1b0b0
-		>;
-	};
-
-	pinctrl_w1: w1grp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x0b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
deleted file mode 100644
index 56cd16e5a77fe..0000000000000
--- a/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 PHYTEC Messtechnik GmbH
- * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
- */
-
-#include "imx6ul-phytec-phycore-som.dtsi"
-
-/ {
-	model = "PHYTEC phyCORE-i.MX6 ULL";
-	compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
-};
-
-&iomuxc {
-	/delete-node/ gpioledssomgrp;
-};
-
-&iomuxc_snvs {
-	pinctrl_gpioleds_som: gpioledssomgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
deleted file mode 100644
index 8e2a4c5d77650..0000000000000
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 PHYTEC Messtechnik GmbH
- * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
- */
-
-/dts-v1/;
-#include "imx6ull.dtsi"
-#include "imx6ull-phytec-phycore-som.dtsi"
-#include "imx6ull-phytec-segin.dtsi"
-#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
-#include "imx6ull-phytec-segin-peb-av-02.dtsi"
-
-/ {
-	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC";
-	compatible = "phytec,imx6ull-pbacd10-emmc", "phytec,imx6ull-pbacd10",
-		     "phytec,imx6ull-pcl063","fsl,imx6ull";
-};
-
-&adc1 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&tlv320 {
-	status = "okay";
-};
-
-&ecspi3 {
-	status = "okay";
-};
-
-&ethphy1 {
-	status = "okay";
-};
-
-&ethphy2 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-};
-
-&fec2 {
-	status = "okay";
-};
-
-&i2c_rtc {
-	status = "okay";
-};
-
-&reg_can1_en {
-	status = "okay";
-};
-
-&reg_sound_1v8 {
-	status = "okay";
-};
-
-&reg_sound_3v3 {
-	status = "okay";
-};
-
-&sai2 {
-	status = "okay";
-};
-
-&sound {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbotg1 {
-	status = "okay";
-};
-
-&usbotg2 {
-	status = "okay";
-};
-
-&usdhc1 {
-	status = "okay";
-};
-
-&usdhc2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
deleted file mode 100644
index 1d7362b5ac91b..0000000000000
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 PHYTEC Messtechnik GmbH
- * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
- */
-
-/dts-v1/;
-#include "imx6ull.dtsi"
-#include "imx6ull-phytec-phycore-som.dtsi"
-#include "imx6ull-phytec-segin.dtsi"
-#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
-#include "imx6ull-phytec-segin-peb-av-02.dtsi"
-#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi"
-
-/ {
-	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND";
-	compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10",
-		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
-};
-
-&adc1 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&tlv320 {
-	status = "okay";
-};
-
-&ecspi3 {
-	status = "okay";
-};
-
-&ethphy1 {
-	status = "okay";
-};
-
-&ethphy2 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-};
-
-&fec2 {
-	status = "okay";
-};
-
-&gpmi {
-	status = "okay";
-};
-
-&i2c_rtc {
-	status = "okay";
-};
-
-&reg_can1_en {
-	status = "okay";
-};
-
-&reg_sound_1v8 {
-	status = "okay";
-};
-
-&reg_sound_3v3 {
-	status = "okay";
-};
-
-&sai2 {
-	status = "okay";
-};
-
-&sound {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbotg1 {
-	status = "okay";
-};
-
-&usbotg2 {
-	status = "okay";
-};
-
-&usdhc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
deleted file mode 100644
index 4bcbae024d8d4..0000000000000
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 PHYTEC Messtechnik GmbH
- * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
- */
-
-/dts-v1/;
-#include "imx6ull.dtsi"
-#include "imx6ull-phytec-phycore-som.dtsi"
-#include "imx6ull-phytec-segin.dtsi"
-#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
-#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi"
-
-/ {
-	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Low Cost with NAND";
-	compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10",
-		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
-};
-
-&adc1 {
-	status = "okay";
-};
-
-&ethphy1 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-};
-
-&gpmi {
-	status = "okay";
-};
-
-&i2c_rtc {
-	status = "okay";
-};
-
-&usbotg1 {
-	status = "okay";
-};
-
-&usdhc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi
deleted file mode 100644
index 06bb7f3277803..0000000000000
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright (C) 2018 PHYTEC Messtechnik GmbH
- * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
- */
-
-#include "imx6ul-phytec-segin-peb-av-02.dtsi"
-
-&iomuxc {
-	/delete-node/ edtft5406grp;
-	/delete-node/ stmpegrp;
-};
-
-&iomuxc_snvs {
-	pinctrl_edt_ft5406: edtft5406grp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0
-		>;
-	};
-
-	pinctrl_stmpe: stmpegrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
deleted file mode 100644
index ff08d95a1aa2b..0000000000000
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 PHYTEC Messtechnik GmbH
- * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
- */
-
-#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
-
-&iomuxc {
-	/delete-node/ gpio_keysgrp;
-};
-
-&iomuxc_snvs {
-	pinctrl_gpio_keys: gpio_keysgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x79
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi
deleted file mode 100644
index df25814a33719..0000000000000
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2021 PHYTEC Messtechnik GmbH
- * Author: Yunus Bas <y.bas@phytec.de>
- */
-
-#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi"
-
-&iomuxc {
-	/delete-node/ wlgrp;
-};
-
-&iomuxc_snvs {
-	pinctrl_wl: wlgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x3031
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
deleted file mode 100644
index e287a0453b5f9..0000000000000
--- a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 PHYTEC Messtechnik GmbH
- * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
- */
-
-#include "imx6ul-phytec-segin.dtsi"
-
-/ {
-	model = "PHYTEC phyBOARD-Segin i.MX6 ULL";
-	compatible = "phytec,imx6ull-pbacd-10", "phytec,imx6ull-pcl063","fsl,imx6ull";
-};
-
-&iomuxc {
-	/delete-node/ flexcan1engrp;
-	/delete-node/ rtcintgrp;
-};
-
-&iomuxc_snvs {
-	princtrl_flexcan1_en: flexcan1engrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
-		>;
-	};
-
-	pinctrl_rtc_int: rtcintgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts
deleted file mode 100644
index 14adb87da9111..0000000000000
--- a/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2021 PHYTEC Messtechnik GmbH
- * Author: Alexander Bauer <a.bauer@phytec.de>
- */
-
-/dts-v1/;
-#include "imx6ull-phytec-tauri.dtsi"
-
-/ {
-	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
-	compatible = "phytec,imx6ull-phygate-tauri",
-		     "phytec,imx6ull-phygate-tauri-emmc",
-		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
-};
-
-/* EMMC-Version */
-&usdhc2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts
deleted file mode 100644
index ae396ac63443b..0000000000000
--- a/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2021 PHYTEC Messtechnik GmbH
- * Author: Alexander Bauer <a.bauer@phytec.de>
- */
-
-/dts-v1/;
-#include "imx6ull-phytec-tauri.dtsi"
-
-/ {
-	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
-	compatible = "phytec,imx6ull-phygate-tauri",
-		     "phytec,imx6ull-phygate-tauri-nand",
-		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
-};
-
-/* NAND-Version */
-&gpmi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
deleted file mode 100644
index 5464a52a1f944..0000000000000
--- a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
+++ /dev/null
@@ -1,588 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2021 PHYTEC Messtechnik GmbH
- * Author: Alexander Bauer <a.bauer@phytec.de>
- */
-
-/dts-v1/;
-#include "imx6ull.dtsi"
-#include "imx6ull-phytec-phycore-som.dtsi"
-
-/ {
-
-	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
-	compatible = "phytec,imx6ull-phygate-tauri",
-		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
-
-	aliases {
-		rtc0 = &i2c_rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	gpio_keys: gpio-keys {
-		compatible = "gpio-key";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		key {
-			label = "KEY-A";
-			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_A>;
-			wakeup-source;
-		};
-	};
-
-	reg_adc1_vref_3v3: regulator-vref-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_s25fl064_hold: regulator-s25fl064-hold {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_s25fl064_hold>;
-		compatible = "regulator-fixed";
-		regulator-name = "s25fl064_hold";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_usb_hub_vbus: regulator-hub-otg1-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbhubpwr>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_hub_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg1pwr>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	user_leds: user-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_user_leds>,
-			    <&pinctrl_user_leds_snvs>;
-
-		user-led1 {
-			label = "yellow";
-			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "off";
-		};
-
-		user-led2 {
-			label = "red";
-			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "off";
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>,
-		    <&pinctrl_ecspi1_cs>;
-	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>,
-		   <&gpio3 10 GPIO_ACTIVE_LOW>,
-		   <&gpio3 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	tpm_tis: tpm@1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tpm>;
-		compatible = "tcg,tpm_tis-spi";
-		reg = <1>;
-		spi-max-frequency = <20000000>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	s25fl064: flash@2 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = " jedec,spi-nor";
-		reg = <2>;
-		spi-max-frequency = <40000000>;
-		m25p,fast-read;
-		status = "disabled";
-	};
-};
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-	dmas = <&sdma 7 8 0>,
-	       <&sdma 8 8 0>;
-	dma-names = "rx", "tx";
-	status = "okay";
-};
-
-&ethphy1 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy2>;
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	tmp102: tmp@49 {
-		compatible = "ti,tmp102";
-		reg = <0x49>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tempsense>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		#thermal-sensor-cells = <1>;
-	};
-
-	i2c_rtc: rtc@68 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc_int>;
-		compatible = "microcrystal,rv4162";
-		reg = <0x68>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c4 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	pinctrl-1 = <&pinctrl_i2c4_gpio>;
-	sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&mdio {
-	ethphy2: ethernet-phy@2 {
-		reg = <2>;
-		micrel,led-mode = <1>;
-		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
-		clock-names = "rmii-ref";
-		status = "okay";
-	};
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm6>;
-	status = "okay";
-};
-
-&pwm7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm7>;
-	status = "okay";
-};
-
-&pwm8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm8>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-/* UART4 * RS485  */
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-/* UART5 * RS232  */
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart7>;
-	status = "okay";
-};
-
-/* USB */
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1>;
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_hub_vbus>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&usdhc2 {
-	status = "disabled";
-};
-
-&iomuxc_snvs {
-	pinctrl_rtc_int: rtcintgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
-		>;
-	};
-
-	pinctrl_stmpe: stmpegrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
-		>;
-	};
-
-	pinctrl_tempsense: tempsensegrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
-		>;
-	};
-
-	pinctrl_tpm: tpmgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
-		>;
-	};
-
-	pinctrl_usbhubpwr: usbhubpwrgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x17059
-		>;
-	};
-
-	pinctrl_user_leds_snvs: user_ledsgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x79
-		>;
-	};
-};
-
-&iomuxc {
-	pinctrl_gpio: gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x17059  /* nUART_MUX_RS232 */
-			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x17059  /* nUART_MUX_DUAL_RX_TX */
-		>;
-	};
-
-	pinctrl_gpio_keys: gpiokeysgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x79
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x100b1
-			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x100b1
-			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x100b1
-			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x100b1
-			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100b1
-			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x100b1
-		>;
-	};
-
-	pinctrl_ecspi1_cs: ecspi1csgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x10b0
-			MX6UL_PAD_LCD_DATA05__GPIO3_IO10	0x10b0
-			MX6UL_PAD_LCD_DATA06__GPIO3_IO11	0x10b0
-		>;
-	};
-
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX	0x0b0b0
-			MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX	0x0b0b0
-		>;
-	};
-
-	princtrl_flexcan2_en: flexcan2engrp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x17059
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__I2C2_SCL	0xb0
-			MX6UL_PAD_GPIO1_IO01__I2C2_SDA	0xb0
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0xb0
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA01__I2C3_SCL	0xb0
-			MX6UL_PAD_LCD_DATA00__I2C3_SDA	0xb0
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA01__GPIO3_IO06	0xb0
-			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0xb0
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA03__I2C4_SCL	0xb0
-			MX6UL_PAD_LCD_DATA02__I2C4_SDA	0xb0
-		>;
-	};
-
-	pinctrl_i2c4_gpio: i2c4gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA03__GPIO3_IO08	0xb0
-			MX6UL_PAD_LCD_DATA02__GPIO3_IO07	0xb0
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__PWM3_OUT	0x0b0b0
-		>;
-	};
-
-	pinctrl_pwm6: pwm6grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TDI__PWM6_OUT	0x0b0b0
-		>;
-	};
-
-	pinctrl_pwm7: pwm7grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TCK__PWM7_OUT	0x0b0b0
-		>;
-	};
-
-	pinctrl_pwm8: pwm8grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TRST_B__PWM8_OUT	0x0b0b0
-		>;
-	};
-
-	pinctrl_s25fl064_hold: s25fl064holdgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA12__GPIO3_IO17	0x100b1
-		>;
-	};
-
-	pinctrl_sai2: sai2grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
-			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
-			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
-			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
-			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b1
-			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b1
-			MX6UL_PAD_LCD_HSYNC__GPIO3_IO02	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart7: uart7grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x1b0b1
-			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usb_otg1: usbotg1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x80
-		>;
-	};
-
-	pinctrl_usbotg1pwr: usbotg1pwrgrp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1200mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_user_leds: userledsgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x79
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h
deleted file mode 100644
index 54cfe72295aa4..0000000000000
--- a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2016 Freescale Semiconductor, Inc.
- * Copyright (C) 2017 NXP
- */
-
-#ifndef __DTS_IMX6ULL_PINFUNC_SNVS_H
-#define __DTS_IMX6ULL_PINFUNC_SNVS_H
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10                          0x0000 0x0044 0x0000 0x5 0x0
-#define MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11                          0x0004 0x0048 0x0000 0x5 0x0
-#define MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00                        0x0008 0x004C 0x0000 0x5 0x0
-#define MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01                        0x000C 0x0050 0x0000 0x5 0x0
-#define MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02                        0x0010 0x0054 0x0000 0x5 0x0
-#define MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03                        0x0014 0x0058 0x0000 0x5 0x0
-#define MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04                        0x0018 0x005C 0x0000 0x5 0x0
-#define MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05                        0x001C 0x0060 0x0000 0x5 0x0
-#define MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06                        0x0020 0x0064 0x0000 0x5 0x0
-#define MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07                        0x0024 0x0068 0x0000 0x5 0x0
-#define MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08                        0x0028 0x006C 0x0000 0x5 0x0
-#define MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09                        0x002C 0x0070 0x0000 0x5 0x0
-
-#endif /* __DTS_IMX6ULL_PINFUNC_SNVS_H */
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
deleted file mode 100644
index 7328d4ef8559f..0000000000000
--- a/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2016 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DTS_IMX6ULL_PINFUNC_H
-#define __DTS_IMX6ULL_PINFUNC_H
-
-#include "imx6ul-pinfunc.h"
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-/* signals common for i.MX6UL and i.MX6ULL */
-#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX
-#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX                    0x00BC 0x0348 0x0644 0x0 0x6
-#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
-#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX                    0x00C0 0x034C 0x0644 0x0 0x7
-#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS
-#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS                     0x00CC 0x0358 0x0640 0x1 0x5
-#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS
-#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS                  0x00D0 0x035C 0x0640 0x1 0x6
-#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS
-#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS                      0x01EC 0x0478 0x0640 0x8 0x7
-
-/* signals for i.MX6ULL only */
-#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX                    0x0084 0x0310 0x0000 0x9 0x0
-#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX                    0x0084 0x0310 0x0644 0x9 0x4
-#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX                    0x0088 0x0314 0x0644 0x9 0x5
-#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX                    0x0088 0x0314 0x0000 0x9 0x0
-#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS                     0x008C 0x0318 0x0000 0x9 0x0
-#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS                     0x008C 0x0318 0x0640 0x9 0x3
-#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS                     0x0090 0x031C 0x0640 0x9 0x4
-#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS                     0x0090 0x031C 0x0000 0x9 0x0
-#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01                  0x00B8 0x0344 0x0000 0x9 0x0
-#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02                  0x00BC 0x0348 0x0000 0x9 0x0
-#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03                  0x00C0 0x034C 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04                    0x00C4 0x0350 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05                    0x00C8 0x0354 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06                       0x00CC 0x0358 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07                    0x00D0 0x035C 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08                    0x00D4 0x0360 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09                       0x00D8 0x0364 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED                       0x00DC 0x0368 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ                        0x00E0 0x036C 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08                    0x00E4 0x0370 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09                    0x00E8 0x0374 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10                       0x00EC 0x0378 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_TX_DATA0__EPDC_SDDO11                    0x00F0 0x037C 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_TX_DATA1__EPDC_SDDO12                    0x00F4 0x0380 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_TX_EN__EPDC_SDDO13                       0x00F8 0x0384 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_TX_CLK__EPDC_SDDO14                      0x00FC 0x0388 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_RX_ER__EPDC_SDDO15                       0x0100 0x038C 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_CLK__EPDC_SDCLK                            0x0104 0x0390 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_ENABLE__EPDC_SDLE                          0x0108 0x0394 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_HSYNC__EPDC_SDOE                           0x010C 0x0398 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_VSYNC__EPDC_SDCE0                          0x0110 0x039C 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_RESET__EPDC_GDOE                           0x0114 0x03A0 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA00__EPDC_SDDO00                        0x0118 0x03A4 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA01__EPDC_SDDO01                        0x011C 0x03A8 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA02__EPDC_SDDO02                        0x0120 0x03AC 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA03__EPDC_SDDO03                        0x0124 0x03B0 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA04__EPDC_SDDO04                        0x0128 0x03B4 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA05__EPDC_SDDO05                        0x012C 0x03B8 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA06__EPDC_SDDO06                        0x0130 0x03BC 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA07__EPDC_SDDO07                        0x0134 0x03C0 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA14__EPDC_SDSHR                         0x0150 0x03DC 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA15__EPDC_GDRL                          0x0154 0x03E0 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK                         0x0158 0x03E4 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP                          0x015C 0x03E8 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1                         0x016C 0x03F8 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02                        0x0170 0x03FC 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03                        0x0174 0x0400 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2                         0x01D4 0x0460 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3                       0x01D8 0x0464 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1                        0x01DC 0x0468 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_HSYNC__ESAI_TX1                            0x01E0 0x046C 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK                     0x01E4 0x0470 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK                     0x01E8 0x0474 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS                         0x01EC 0x0478 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK                        0x01F0 0x047C 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
-
-#endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi
deleted file mode 100644
index 3fdece5bd31f9..0000000000000
--- a/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi
+++ /dev/null
@@ -1,852 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright (C) 2023 chargebyte GmbH
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "imx6ull.dtsi"
-
-/ {
-	aliases {
-		mmc0 = &usdhc2; /* eMMC */
-	};
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		pinctrl-0 = <&pinctrl_emmc_rst>;
-		pinctrl-names = "default";
-		reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_dcdc_3v3: regulator-dcdc-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "dcdc-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "ldo-1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_status_leds>;
-
-		led-1 {
-			function = LED_FUNCTION_BOOT;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-		};
-
-		led-2 {
-			function = LED_FUNCTION_PROGRAMMING;
-			color = <LED_COLOR_ID_YELLOW>;
-			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-3 {
-			function = LED_FUNCTION_HEARTBEAT;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&adc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc_motor
-		     &pinctrl_adc_cp
-		     &pinctrl_adc_pp>;
-	vref-supply = <&vgen1_reg>;
-	status = "okay";
-};
-
-&cpu0 {
-	clock-frequency = <792000000>;
-};
-
-&ecspi2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	num-cs = <3>;
-	cs-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH
-		    &gpio3 2  GPIO_ACTIVE_HIGH
-		    &gpio3 4  GPIO_ACTIVE_HIGH>;
-};
-
-&ecspi4 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	num-cs = <1>;
-	cs-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1
-		     &pinctrl_enet1_phy_rst
-		     &pinctrl_enet_mdio>;
-	phy-supply = <&reg_dcdc_3v3>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <25>;
-	phy-handle = <&ethphy0>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_enet1_phy_int>;
-			interrupt-parent = <&gpio2>;
-			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-			interrupts-extended = <&gpio2 7 IRQ_TYPE_EDGE_FALLING>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-			max-speed = <100>;
-			smsc,disable-energy-detect;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names = "",				/* 0 */
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",				/* 5 */
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",				/* 10 */
-			  "",
-			  "",
-			  "CP_INVERT",
-			  "",
-			  "",				/* 15 */
-			  "",
-			  "",
-			  "",
-			  "MOTOR_1_FAULT_N",
-			  "",				/* 20 */
-			  "",
-			  "ROTARY_SWITCH_1_2_N",
-			  "ROTARY_SWITCH_1_4_N",
-			  "ROTARY_SWITCH_1_8_N",
-			  "MOTOR_2_FAULT_N";		/* 25 */
-};
-
-&gpio3 {
-	gpio-line-names = "",				/* 0 */
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",				/* 5 */
-			  "EXT_GPIO",
-			  "MOTOR_1_DRIVER_IN1_N",
-			  "MOTOR_1_DRIVER_IN2",
-			  "MOTOR_2_DRIVER_IN1",
-			  "STM32_BOOT0",		/* 10 */
-			  "STM32_RST_N",
-			  "RELAY_1_ENABLE",
-			  "RELAY_2_ENABLE",
-			  "",
-			  "",				/* 15 */
-			  "QCA700X_MAINS_BOOTLOADER_N",
-			  "QCA700X_CP_RST_N",
-			  "QCA700X_CP_BOOTLOADER_N",
-			  "",
-			  "DIGITAL_OUT_1",		/* 20 */
-			  "DIGITAL_OUT_2",
-			  "DIGITAL_OUT_3",
-			  "DIGITAL_OUT_4",
-			  "DIGITAL_OUT_5",
-			  "DIGITAL_OUT_6",		/* 25 */
-			  "ROTARY_SWITCH_2_8_N",
-			  "ROTARY_SWITCH_2_4_N",
-			  "ROTARY_SWITCH_2_2_N";
-};
-
-&gpio4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pmic>;
-
-	gpio-line-names = "",				/* 0 */
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",				/* 5 */
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",				/* 10 */
-			  "",
-			  "",
-			  "BOARD_VARIANT_1",
-			  "BOARD_VARIANT_2",
-			  "BOARD_VARIANT_0",		/* 15 */
-			  "BOARD_VARIANT_3",
-			  "",
-			  "ROTARY_SWITCH_2_1_N",
-			  "",
-			  "DIGITAL_IN_5",		/* 20 */
-			  "",
-			  "",
-			  "DIGITAL_IN_6",
-			  "",
-			  "DIGITAL_IN_1",		/* 25 */
-			  "DIGITAL_IN_2",
-			  "DIGITAL_IN_4",
-			  "DIGITAL_IN_3";
-
-	pmic-int-hog {
-		gpio-hog;
-		gpios = <19 0>;
-		input;
-	};
-};
-
-&gpio5 {
-	gpio-line-names = "ROTARY_SWITCH_1_1_N",	/* 0 */
-			  "",
-			  "RELAY_2_SENSE",
-			  "RELAY_1_SENSE",
-			  "",
-			  "",				/* 5 */
-			  "",
-			  "QCA700X_MAINS_RST_N",
-			  "MOTOR_2_DRIVER_IN2",
-			  "",
-			  "CP_POSITIVE_PEAK_RST",	/* 10 */
-			  "CP_NEGATIVE_PEAK_RST";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	pinctrl-1 = <&pinctrl_i2c4_gpio>;
-	scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	pfuze3001: pmic@8 {
-		compatible = "fsl,pfuze3001";
-		reg = <0x08>;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-name = "SW1";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-name = "SW2";
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-name = "SW3";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-name = "VSNVS";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-name = "VLDO1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-name = "VLDO2";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-name = "VCCSD";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-name = "V33";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-name = "VLDO3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-name = "VLDO4";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	onewire@18 {
-		compatible = "maxim,ds2484";
-		reg = <0x18>;
-	};
-
-	accelerometer@19 {
-		compatible = "st,iis328dq", "st,h3lis331dl-accel";
-		reg = <0x19>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_accelerometer_int1_snvs>;
-		vdd-supply = <&reg_dcdc_3v3>;
-		vddio-supply = <&reg_dcdc_3v3>;
-		st,drdy-int-pin = <1>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_board_var
-		     &pinctrl_digital_input
-		     &pinctrl_digital_output
-		     &pinctrl_gpio_motor
-		     &pinctrl_hog_pins
-		     &pinctrl_rotary_switch1
-		     &pinctrl_rotary_switch2>;
-
-	pinctrl_adc_cp: adc-cpgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02            0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03            0xb0
-		>;
-	};
-
-	pinctrl_adc_motor: adc-motorgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00            0xb0
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01            0xb0
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04            0xb0
-		>;
-	};
-
-	pinctrl_adc_pp: adc-ppgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05            0xb0
-		>;
-	};
-
-	pinctrl_board_var: board-vargrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_CLE__GPIO4_IO15              0xb0
-			MX6UL_PAD_NAND_CE0_B__GPIO4_IO13            0xb0
-			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14            0xb0
-			MX6UL_PAD_NAND_DQS__GPIO4_IO16              0xb0
-		>;
-	};
-
-	pinctrl_digital_input: digital-inputgrp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA04__GPIO4_IO25            0xb0
-			MX6UL_PAD_CSI_DATA05__GPIO4_IO26            0xb0
-			MX6UL_PAD_CSI_DATA07__GPIO4_IO28            0xb0
-			MX6UL_PAD_CSI_DATA06__GPIO4_IO27            0xb0
-			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20             0xb0
-			MX6UL_PAD_CSI_DATA02__GPIO4_IO23            0xb0
-		>;
-	};
-
-	pinctrl_digital_output: digital-outputgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA15__GPIO3_IO20            0x400000b0
-			MX6UL_PAD_LCD_DATA16__GPIO3_IO21            0x400000b0
-			MX6UL_PAD_LCD_DATA17__GPIO3_IO22            0x400000b0
-			MX6UL_PAD_LCD_DATA18__GPIO3_IO23            0x400000b0
-			MX6UL_PAD_LCD_DATA19__GPIO3_IO24            0x400000b0
-			MX6UL_PAD_LCD_DATA20__GPIO3_IO25            0x400000b0
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29         0x10b0
-			MX6UL_PAD_LCD_HSYNC__GPIO3_IO02             0xb0
-			MX6UL_PAD_LCD_RESET__GPIO3_IO04             0xb0
-			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK        0x10b0
-			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO        0x10b0
-			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI        0x10b0
-		>;
-	};
-
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15           0x10b0
-			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK       0x10b0
-			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO         0x10b0
-			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI          0x10b0
-		>;
-	};
-
-	pinctrl_emmc_rst: emmc-rstgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10              0x400010b0
-		>;
-	};
-
-	pinctrl_enet_mdio: enet-mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO            0x10b0
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC             0x10b0
-		>;
-	};
-
-	pinctrl_enet1_phy_int: enet1-phy-intgrp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07           0x10b0
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00     0x100b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01     0x100b0
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN          0x100b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1      0x400000b1
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00     0xb0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01     0xb0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN          0xb0
-		>;
-	};
-
-	pinctrl_ext_uart: ext-uartgrp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX      0xb0
-			MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX         0xb0
-		>;
-	};
-
-	pinctrl_fan_enable: fan-enablegrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__GPIO3_IO05            0x400000b0
-		>;
-	};
-
-	pinctrl_gpio_motor: gpio-motorgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA02__GPIO3_IO07            0x400000b0
-			MX6UL_PAD_LCD_DATA03__GPIO3_IO08            0x400000b0
-			MX6UL_PAD_LCD_DATA04__GPIO3_IO09            0x400000b0
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19           0xb0
-			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25         0xb0
-		>;
-	};
-
-	pinctrl_hog_pins: hog-pinsgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA07__GPIO3_IO12            0x400000b0
-			MX6UL_PAD_LCD_DATA08__GPIO3_IO13            0x400000b0
-			MX6UL_PAD_JTAG_TDI__GPIO1_IO13              0x400070a0
-			MX6UL_PAD_LCD_DATA05__GPIO3_IO10            0x400000b0
-			MX6UL_PAD_LCD_DATA06__GPIO3_IO11            0x400000b0
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA           0x400008b0
-			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL           0x400008b0
-		>;
-	};
-
-	pinctrl_i2c4_gpio: i2c4-gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21         0x400008b0
-			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20         0x400008b0
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT        0x70b1
-			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19             0xb0
-		>;
-	};
-
-	pinctrl_pwm_cp: pinctrl-pwm-cpgrp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TRST_B__PWM8_OUT             0x60a0
-		>;
-	};
-
-	pinctrl_pwm_digital_input_ref: pwm-digital-input-refgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__PWM2_OUT              0xb0
-		>;
-	};
-
-	pinctrl_pwm_fan: pwm-fangrp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TCK__PWM7_OUT                0x60a0
-		>;
-	};
-
-	pinctrl_qca700x_cp_btld: qca700x-cp-btldgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA13__GPIO3_IO18            0x400000b0
-		>;
-	};
-
-	pinctrl_qca700x_cp_int: qca700x-cp-intgrp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_DATA1__GPIO2_IO19             0x10b0
-		>;
-	};
-
-	pinctrl_qca700x_cp_rst: qca700x-cp-rstgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA12__GPIO3_IO17            0x400000b0
-		>;
-	};
-
-	pinctrl_qca700x_mains_btld: qca700x-mains-btldgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA11__GPIO3_IO16            0x400000b0
-		>;
-	};
-
-	pinctrl_rotary_switch1: rotary-switch1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_CTS_B__GPIO1_IO22           0xb0
-			MX6UL_PAD_UART2_RTS_B__GPIO1_IO23           0xb0
-			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24         0xb0
-		>;
-	};
-
-	pinctrl_rotary_switch2: rotary-switch2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18            0xb0
-			MX6UL_PAD_LCD_DATA23__GPIO3_IO28            0xb0
-			MX6UL_PAD_LCD_DATA22__GPIO3_IO27            0xb0
-			MX6UL_PAD_LCD_DATA21__GPIO3_IO26            0xb0
-		>;
-	};
-
-	pinctrl_rs485_1: rs485-1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18           0xb0
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX       0xb0
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX       0xb0
-		>;
-	};
-
-	pinctrl_rs485_2: rs485-2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA03__GPIO4_IO24            0x10b0
-			MX6UL_PAD_CSI_DATA01__UART5_DCE_RX          0x10b0
-			MX6UL_PAD_CSI_DATA00__UART5_DCE_TX          0x10b0
-		>;
-	};
-
-	pinctrl_status_leds: status-ledsgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA09__GPIO3_IO14            0xb0
-			MX6UL_PAD_LCD_DATA10__GPIO3_IO15            0xb0
-			MX6UL_PAD_LCD_DATA14__GPIO3_IO19            0xb0
-		>;
-	};
-
-	pinctrl_stm32: stm32grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX      0x10b0
-			MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX      0x10b0
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__UART4_DTE_RX             0xb0
-			MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX          0xb0
-		>;
-	};
-
-	pinctrl_usb: usbgrp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USB_OTG1_OC              0x70b0
-			MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID         0x70b0
-		>;
-	};
-
-	pinctrl_usb_pwr: usb-pwrgrp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USB_OTG1_PWR             0xb0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x7071
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x7071
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x7071
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x7071
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x7071
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x7071
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x7071
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x7071
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x7071
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x7071
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x70b1
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x70b1
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x70b1
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x70b1
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x70b1
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x70b1
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x70b1
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x70b1
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x70b1
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x70b1
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x70f1
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x70f1
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x70f1
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x70f1
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x70f1
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x70f1
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x70f1
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x70f1
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x70f1
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x70f1
-		>;
-	};
-
-	pinctrl_wdog2: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B           0x10b0
-		>;
-	};
-};
-
-&iomuxc_snvs {
-	pinctrl-names = "default_snvs";
-	pinctrl-0 = <&pinctrl_cp_peak_snvs
-		     &pinctrl_gpio_motor_snvs
-		     &pinctrl_relay_sense_snvs
-		     &pinctrl_rotary_switch1_snvs>;
-
-	pinctrl_accelerometer_int1_snvs: accelerometer-int1-snvsgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05         0x130a0
-		>;
-	};
-
-	pinctrl_cp_peak_snvs: cp-peak-snvsgrp {
-		fsl,pins = <
-			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10           0x130a0
-			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11           0x130a0
-		>;
-	};
-
-	pinctrl_enet1_phy_rst: enet1-phy-rstgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06         0x100a0
-		>;
-	};
-
-	pinctrl_fan_sense_snvs: fan-sense-snvsgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01         0x100a0
-		>;
-	};
-
-	pinctrl_gpio_motor_snvs: gpio-motor-snvsgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08         0x110a0
-		>;
-	};
-
-	pinctrl_qca700x_mains_int: qca700x-mains-intgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09         0x130a0
-		>;
-	};
-
-	pinctrl_qca700x_mains_rst: qca700x-mains-rstgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07         0x400100a0
-		>;
-	};
-
-	pinctrl_relay_sense_snvs: relay-sense-snvsgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03         0x100a0
-			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02         0x100a0
-		>;
-	};
-
-	pinctrl_rotary_switch1_snvs: rotary-switch1-snvsgrp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00         0x110a0
-		>;
-	};
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm_digital_input_ref>;
-	status = "okay";
-};
-
-&pwm8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm_cp>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rs485_1>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	fsl,dte-mode;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rs485_2>;
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_stm32>;
-	status = "okay";
-};
-
-&uart7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ext_uart>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb
-		     &pinctrl_usb_pwr>;
-	dr_mode = "host";
-	power-active-high;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbphy1 {
-	fsl,tx-cal-45-dn-ohms = <35>;
-	fsl,tx-cal-45-dp-ohms = <35>;
-};
-
-&usbphy2 {
-	fsl,tx-cal-45-dn-ohms = <35>;
-	fsl,tx-cal-45-dp-ohms = <35>;
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	vmmc-supply = <&sw2_reg>;
-	vqmmc-supply = <&reg_1v8>;
-	mmc-pwrseq = <&emmc_pwrseq>;
-	bus-width = <8>;
-	non-removable;
-	no-sd;
-	no-sdio;
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&wdog2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog2>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-master.dts b/arch/arm/boot/dts/imx6ull-tarragon-master.dts
deleted file mode 100644
index 67007ce383e3c..0000000000000
--- a/arch/arm/boot/dts/imx6ull-tarragon-master.dts
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright (C) 2023 chargebyte GmbH
-
-#include "imx6ull-tarragon-common.dtsi"
-
-/ {
-	model = "chargebyte Tarragon Master";
-	compatible = "chargebyte,imx6ull-tarragon-master", "fsl,imx6ull";
-
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_fan_sense_snvs>;
-		fan-supply = <&reg_fan>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-	};
-
-	reg_fan: regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "fan-supply";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_fan_enable>;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&ecspi2 {
-	status = "okay";
-
-	qca700x_cp: ethernet@0 {
-		reg = <0x0>;
-		compatible = "qca,qca7000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_qca700x_cp_int
-			     &pinctrl_qca700x_cp_rst
-			     &pinctrl_qca700x_cp_btld>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
-		spi-cpha;
-		spi-cpol;
-		spi-max-frequency = <16000000>;
-	};
-};
-
-&ecspi4 {
-	status = "okay";
-
-	qca700x_mains: ethernet@0 {
-		reg = <0x0>;
-		compatible = "qca,qca7000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_qca700x_mains_int
-			     &pinctrl_qca700x_mains_rst
-			     &pinctrl_qca700x_mains_btld>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
-		spi-cpha;
-		spi-cpol;
-		spi-max-frequency = <16000000>;
-	};
-};
-
-&fec1 {
-	status = "okay";
-};
-
-&pwm7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm_fan>;
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-micro.dts b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts
deleted file mode 100644
index e471c2005bee9..0000000000000
--- a/arch/arm/boot/dts/imx6ull-tarragon-micro.dts
+++ /dev/null
@@ -1,10 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright (C) 2023 chargebyte GmbH
-
-#include "imx6ull-tarragon-common.dtsi"
-
-/ {
-	model = "chargebyte Tarragon Micro";
-	compatible = "chargebyte,imx6ull-tarragon-micro", "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slave.dts b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts
deleted file mode 100644
index cee223b5f8e1c..0000000000000
--- a/arch/arm/boot/dts/imx6ull-tarragon-slave.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright (C) 2023 chargebyte GmbH
-
-#include "imx6ull-tarragon-common.dtsi"
-
-/ {
-	model = "chargebyte Tarragon Slave";
-	compatible = "chargebyte,imx6ull-tarragon-slave", "fsl,imx6ull";
-};
-
-&ecspi2 {
-	status = "okay";
-
-	qca700x_cp: ethernet@0 {
-		reg = <0x0>;
-		compatible = "qca,qca7000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_qca700x_cp_int
-			     &pinctrl_qca700x_cp_rst
-			     &pinctrl_qca700x_cp_btld>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
-		spi-cpha;
-		spi-cpol;
-		spi-max-frequency = <16000000>;
-	};
-};
-
-&fec1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts
deleted file mode 100644
index 7fd53b7a43723..0000000000000
--- a/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-//
-// Copyright (C) 2023 chargebyte GmbH
-
-#include "imx6ull-tarragon-common.dtsi"
-
-/ {
-	model = "chargebyte Tarragon SlaveXT";
-	compatible = "chargebyte,imx6ull-tarragon-slavext", "fsl,imx6ull";
-
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_fan_sense_snvs>;
-		fan-supply = <&reg_fan>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-	};
-
-	reg_fan: regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "fan-supply";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_fan_enable>;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&ecspi2 {
-	status = "okay";
-
-	qca700x_cp: ethernet@0 {
-		reg = <0x0>;
-		compatible = "qca,qca7000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_qca700x_cp_int
-			     &pinctrl_qca700x_cp_rst
-			     &pinctrl_qca700x_cp_btld>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
-		spi-cpha;
-		spi-cpol;
-		spi-max-frequency = <16000000>;
-	};
-};
-
-&fec1 {
-	status = "okay";
-};
-
-&pwm7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm_fan>;
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts
deleted file mode 100644
index e593b7036fc71..0000000000000
--- a/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/dts-v1/;
-
-#include "imx6ull-tqma6ull2.dtsi"
-#include "mba6ulx.dtsi"
-
-/ {
-	model = "TQ-Systems TQMa6ULL2 SoM on MBa6ULx board";
-	compatible = "tq,imx6ull-tqma6ull2-mba6ulx", "tq,imx6ull-tqma6ull2", "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi
deleted file mode 100644
index 8541cb3f3b3e2..0000000000000
--- a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include "imx6ull.dtsi"
-#include "imx6ul-tqma6ul-common.dtsi"
-#include "imx6ul-tqma6ulx-common.dtsi"
-
-/ {
-	model = "TQ-Systems TQMa6ULL2 SoM";
-	compatible = "tq,imx6ull-tqma6ull2", "fsl,imx6ull";
-};
-
-&usdhc2 {
-	fsl,tuning-step = <6>;
-	/* Errata ERR010450 Workaround */
-	max-frequency = <99000000>;
-	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
-	assigned-clock-rates = <0>, <198000000>;
-};
-
-&iomuxc {
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017031
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017039
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017039
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017039
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017039
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017039
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017039
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017039
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017039
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017039
-			/* rst */
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
-			/* rst */
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
-			/* rst */
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts
deleted file mode 100644
index 33437aae98224..0000000000000
--- a/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/dts-v1/;
-
-#include "imx6ull-tqma6ull2l.dtsi"
-#include "mba6ulx.dtsi"
-
-/ {
-	model = "TQ Systems TQMa6ULL2L SoM on MBa6ULx board";
-	compatible = "tq,imx6ull-tqma6ull2l-mba6ulx", "tq,imx6ull-tqma6ull2l", "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi
deleted file mode 100644
index be593d47e3b1e..0000000000000
--- a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include "imx6ull.dtsi"
-#include "imx6ul-tqma6ul-common.dtsi"
-#include "imx6ul-tqma6ulxl-common.dtsi"
-
-/ {
-	model = "TQ Systems TQMa6ULL2L SoM";
-	compatible = "tq,imx6ull-tqma6ull2l", "fsl,imx6ull";
-};
-
-&usdhc2 {
-	fsl,tuning-step = <6>;
-	/* Errata ERR010450 Workaround */
-	max-frequency = <99000000>;
-	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
-	assigned-clock-rates = <0>, <198000000>;
-};
-
-&iomuxc {
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017031
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017039
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017039
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017039
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017039
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017039
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017039
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017039
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017039
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017039
-			/* rst */
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
-			/* rst */
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
-			/* rst */
-			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
deleted file mode 100644
index 2bccd45e9fc22..0000000000000
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright 2016 Freescale Semiconductor, Inc.
-
-#include "imx6ul.dtsi"
-#include "imx6ull-pinfunc.h"
-#include "imx6ull-pinfunc-snvs.h"
-
-/* Delete UART8 in AIPS-1 (i.MX6UL specific) */
-/delete-node/ &uart8;
-/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
-/delete-node/ &crypto;
-
-&cpu0 {
-	clock-frequency = <900000000>;
-	operating-points = <
-		/* kHz	uV */
-		900000	1275000
-		792000	1225000
-		528000	1175000
-		396000	1025000
-		198000	950000
-	>;
-	fsl,soc-operating-points = <
-		/* KHz	uV */
-		900000	1250000
-		792000	1175000
-		528000	1175000
-		396000	1175000
-		198000	1175000
-	>;
-};
-
-&ocotp {
-	compatible = "fsl,imx6ull-ocotp", "syscon";
-};
-
-&pxp {
-	compatible = "fsl,imx6ull-pxp";
-	interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usdhc1 {
-	compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
-};
-
-&usdhc2 {
-	compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
-};
-
-/ {
-	soc: soc {
-		aips3: bus@2200000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02200000 0x100000>;
-			ranges;
-
-			dcp: crypto@2280000 {
-				compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp";
-				reg = <0x02280000 0x4000>;
-				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6ULL_CLK_DCP_CLK>;
-				clock-names = "dcp";
-			};
-
-			rngb: rng@2284000 {
-				compatible = "fsl,imx6ull-rngb", "fsl,imx25-rngb";
-				reg = <0x02284000 0x4000>;
-				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_DUMMY>;
-			};
-
-			iomuxc_snvs: iomuxc-snvs@2290000 {
-				compatible = "fsl,imx6ull-iomuxc-snvs";
-				reg = <0x02290000 0x4000>;
-			};
-
-			uart8: serial@2288000 {
-				compatible = "fsl,imx6ul-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x02288000 0x4000>;
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_UART8_IPG>,
-					 <&clks IMX6UL_CLK_UART8_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
deleted file mode 100644
index 483d9732c0023..0000000000000
--- a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright 2018 NXP.
-
-/dts-v1/;
-
-#include "imx6ulz.dtsi"
-#include "imx6ul-14x14-evk.dtsi"
-
-/delete-node/ &fec1;
-/delete-node/ &fec2;
-/delete-node/ &can1;
-/delete-node/ &can2;
-/delete-node/ &lcdif;
-/delete-node/ &tsc;
-
-/ {
-	model = "Freescale i.MX6 ULZ 14x14 EVK Board";
-	compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
-
-	/delete-node/ panel;
-};
diff --git a/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts
deleted file mode 100644
index c92e4e2f6ab9c..0000000000000
--- a/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2021 BSH Hausgeraete GmbH
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "imx6ulz.dtsi"
-
-/ {
-	model = "BSH SMM M2";
-	compatible = "bsh,imx6ulz-bsh-smm-m2", "fsl,imx6ull", "fsl,imx6ulz";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	usdhc2_pwrseq: usdhc2-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4330-bt";
-		max-speed = <3000000>;
-		shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "peripheral";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usbphy1 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usdhc2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wlan>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	cap-sdio-irq;
-	mmc-pwrseq = <&usdhc2_pwrseq>;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&gpio1>;
-		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-	};
-};
-
-&wdog1 {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_gpmi_nand: gpmi-nand {
-		fsl,pins = <
-			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
-			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
-			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
-			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb000
-			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
-			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
-			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
-			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
-			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
-			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
-			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
-			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
-			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
-			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
-			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b099
-			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
-			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b099
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x79		/* BT_REG_ON */
-			MX6UL_PAD_SD1_CLK__GPIO2_IO17		0x100b1		/* BT_DEV_WAKE out */
-			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0		/* BT_HOST_WAKE in */
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_wlan: wlangrp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
-			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10059
-			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
-			MX6UL_PAD_SD1_DATA3__GPIO2_IO21		0x79		/* WL_REG_ON */
-			MX6UL_PAD_UART2_CTS_B__GPIO1_IO22	0x100b1		/* WL_DEV_WAKE - WiFi_GPIO_4 - WiFi FW UART */
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x1b0b1		/* WL_HOST_WAKE - WIFI_GPIO_0 - OOB IRQ */
-			MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT	0x4001b031	/* OSC 32Khz wifi clk in */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ulz.dtsi b/arch/arm/boot/dts/imx6ulz.dtsi
deleted file mode 100644
index 0b5f1a7635676..0000000000000
--- a/arch/arm/boot/dts/imx6ulz.dtsi
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright 2018 NXP.
-
-#include "imx6ull.dtsi"
-
-/ {
-	aliases {
-		/delete-property/ ethernet0;
-		/delete-property/ ethernet1;
-		/delete-property/ i2c2;
-		/delete-property/ i2c3;
-		/delete-property/ serial4;
-		/delete-property/ serial5;
-		/delete-property/ serial6;
-		/delete-property/ serial7;
-		/delete-property/ spi2;
-		/delete-property/ spi3;
-	};
-};
-
-/delete-node/ &adc1;
-/delete-node/ &ecspi3;
-/delete-node/ &ecspi4;
-/delete-node/ &epit2;
-/delete-node/ &gpt2;
-/delete-node/ &i2c3;
-/delete-node/ &i2c4;
-/delete-node/ &pwm5;
-/delete-node/ &pwm6;
-/delete-node/ &pwm7;
-/delete-node/ &pwm8;
-/delete-node/ &uart5;
-/delete-node/ &uart6;
-/delete-node/ &uart7;
-/delete-node/ &uart8;
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
deleted file mode 100644
index 01612741f792a..0000000000000
--- a/arch/arm/boot/dts/imx7-colibri-aster.dtsi
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017-2022 Toradex
- */
-
-/* Colibri AD0 to AD3 */
-&adc1 {
-	status = "okay";
-};
-
-/* Colibri SSP */
-&ecspi3 {
-	cs-gpios = <
-		&gpio4 11 GPIO_ACTIVE_LOW /* SODIMM 86 / regular SSPFRM as UNO_SPI_CS or  */
-		&gpio4 23 GPIO_ACTIVE_LOW /* SODIMM 65 / already muxed pinctrl_gpio2 as SPI_CE0_N */
-		&gpio4 22 GPIO_ACTIVE_LOW /* SODIMM 85 / already muxed pinctrl_gpio2 as SPI_CE1_N */
-	>;
-	status = "okay";
-};
-
-/* Colibri Fast Ethernet */
-&fec1 {
-	status = "okay";
-};
-
-/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
-&i2c4 {
-	status = "okay";
-};
-
-/* Colibri PWM<A> */
-&pwm1 {
-	status = "okay";
-};
-
-/* Colibri PWM<B> */
-&pwm2 {
-	status = "okay";
-};
-
-/* Colibri PWM<C> */
-&pwm3 {
-	status = "okay";
-};
-
-/* Colibri PWM<D> */
-&pwm4 {
-	status = "okay";
-};
-
-/* M41T0M6 real time clock */
-&rtc {
-	status = "okay";
-};
-
-/* Colibri UART_A */
-&uart1 {
-	status = "okay";
-};
-
-/* Colibri UART_B */
-&uart2 {
-	status = "okay";
-};
-
-/* Colibri UART_C */
-&uart3 {
-	status = "okay";
-};
-
-/* Colibri USBC */
-&usbotg1 {
-	disable-over-current;
-	status = "okay";
-};
-
-/* Colibri MMC/SD */
-&usdhc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
deleted file mode 100644
index 326440f2b4f4f..0000000000000
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2016-2022 Toradex
- */
-
-/ {
-	/* Fixed crystal dedicated to MCP2515. */
-	clk16m: clk16m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <16000000>;
-	};
-};
-
-/* Colibri AD0 to AD3 */
-&adc1 {
-	status = "okay";
-};
-
-/*
- * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
- * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
- */
-&atmel_mxt_ts {
-	interrupt-parent = <&gpio1>;
-	interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 / INT */
-	pinctrl-0 = <&pinctrl_atmel_adapter>;
-	reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 / RST */
-	status = "disabled";
-};
-
-/* Colibri SSP */
-&ecspi3 {
-	status = "okay";
-
-	mcp2515: can@0 {
-		clocks = <&clk16m>;
-		compatible = "microchip,mcp2515";
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can_int>;
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-		vdd-supply = <&reg_3v3>;
-		xceiver-supply = <&reg_5v0>;
-	};
-};
-
-/* Colibri Fast Ethernet */
-&fec1 {
-	status = "okay";
-};
-
-/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
-&i2c4 {
-	status = "okay";
-};
-
-/* Colibri PWM<A> */
-&pwm1 {
-	status = "okay";
-};
-
-/* Colibri PWM<B> */
-&pwm2 {
-	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
-	status = "okay";
-};
-
-/* Colibri PWM<C> */
-&pwm3 {
-	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
-	status = "okay";
-};
-
-/* Colibri PWM<D> */
-&pwm4 {
-	status = "okay";
-};
-
-/* M41T0M6 real time clock */
-&rtc {
-	status = "okay";
-};
-
-/* Colibri UART_A */
-&uart1 {
-	status = "okay";
-};
-
-/* Colibri UART_B */
-&uart2 {
-	status = "okay";
-};
-
-/* Colibri UART_C */
-&uart3 {
-	status = "okay";
-};
-
-/* Colibri USBC */
-&usbotg1 {
-	disable-over-current;
-	status = "okay";
-};
-
-/* Colibri MMC/SD */
-&usdhc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi
deleted file mode 100644
index b687727f956a6..0000000000000
--- a/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/ {
-	reg_3v3_vmmc: regulator-3v3-vmmc {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* SODIMM 100 */
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "3v3_vmmc";
-		startup-delay-us = <100>;
-	};
-};
-
-/* Colibri AD0 to AD3 */
-&adc1 {
-	status = "okay";
-};
-
-/* Colibri SSP */
-&ecspi3 {
-	status = "okay";
-};
-
-/* Colibri Fast Ethernet */
-&fec1 {
-	status = "okay";
-};
-
-&gpio2 {
-	/*
-	 * uart_b_c_on_x14_enable turns the UART transceiver for UART2 and 5 on. If one wants to
-	 * turn the transceiver off, that property has to be deleted and the gpio handled in
-	 * userspace.
-	 * The same applies to uart_a_on_x13_enable where the UART_A transceiver is turned on.
-	 */
-	uart-b-c-on-x14-enable-hog {
-		gpio-hog;
-		gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
-		output-high;
-	};
-};
-
-&gpio5 {
-	uart-a-on-x13-enable-hog {
-		gpio-hog;
-		gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
-		output-high;
-	};
-};
-
-/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
-&i2c4 {
-	status = "okay";
-};
-
-/* Colibri PWM<A> */
-&pwm1 {
-	status = "okay";
-};
-
-/* Colibri PWM<B> */
-&pwm2 {
-	status = "okay";
-};
-
-/* Colibri PWM<C> */
-&pwm3 {
-	status = "okay";
-};
-
-/* Colibri PWM<D> */
-&pwm4 {
-	status = "okay";
-};
-
-/* M41T0M6 real time clock */
-&rtc {
-	status = "okay";
-};
-
-/* Colibri UART_A */
-&uart1 {
-	status = "okay";
-};
-
-/* Colibri UART_B */
-&uart2 {
-	status = "okay";
-};
-
-/* Colibri UART_C */
-&uart3 {
-	status = "okay";
-};
-
-/* Colibri USBC */
-&usbotg1 {
-	disable-over-current;
-	status = "okay";
-};
-
-/* Colibri MMC/SD, UHS-I capable uSD slot */
-&usdhc1 {
-	cap-power-off-card;
-	/delete-property/ keep-power-in-suspend;
-	/delete-property/ no-1-8-v;
-	vmmc-supply = <&reg_3v3_vmmc>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7-colibri-iris.dtsi b/arch/arm/boot/dts/imx7-colibri-iris.dtsi
deleted file mode 100644
index 6a9e5ab596915..0000000000000
--- a/arch/arm/boot/dts/imx7-colibri-iris.dtsi
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/* Colibri AD0 to AD3 */
-&adc1 {
-	status = "okay";
-};
-
-/*
- * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
- * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
- */
-&atmel_mxt_ts {
-	interrupt-parent = <&gpio1>;
-	interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 / INT */
-	pinctrl-0 = <&pinctrl_atmel_adapter>;
-	reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 / RST */
-};
-
-/* Colibri SSP */
-&ecspi3 {
-	status = "okay";
-};
-
-/* Colibri Fast Ethernet */
-&fec1 {
-	status = "okay";
-};
-
-&gpio2 {
-	/*
-	 * uart25 turns the UART transceiver for UART2 and 5 on. If one wants to turn the
-	 * transceiver off, that property has to be deleted and the gpio handled in userspace.
-	 * The same applies to uart1_tx_on where the UART1 transceiver is turned on.
-	 */
-	uart25-tx-on-hog {
-		gpio-hog;
-		gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
-		output-high;
-	};
-};
-
-&gpio5 {
-	uart1-tx-on-hog {
-		gpio-hog;
-		gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
-		output-high;
-	};
-};
-
-/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
-&i2c4 {
-	status = "okay";
-};
-
-/* Colibri PWM<A> */
-&pwm1 {
-	status = "okay";
-};
-
-/* Colibri PWM<B> */
-&pwm2 {
-	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
-	status = "okay";
-};
-
-/* Colibri PWM<C> */
-&pwm3 {
-	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
-	status = "okay";
-};
-
-/* Colibri PWM<D> */
-&pwm4 {
-	status = "okay";
-};
-
-/* M41T0M6 real time clock */
-&rtc {
-	status = "okay";
-};
-
-/* Colibri UART_A */
-&uart1 {
-	status = "okay";
-};
-
-/* Colibri UART_B */
-&uart2 {
-	status = "okay";
-};
-
-/* Colibri UART_C */
-&uart3 {
-	status = "okay";
-};
-
-/* Colibri USBC */
-&usbotg1 {
-	disable-over-current;
-	status = "okay";
-};
-
-/* Colibri MMC/SD */
-&usdhc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
deleted file mode 100644
index 104580d51d745..0000000000000
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ /dev/null
@@ -1,1142 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2016-2022 Toradex
- */
-
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	aliases {
-		rtc0 = &rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	backlight: backlight {
-		brightness-levels = <0 45 63 88 119 158 203 255>;
-		compatible = "pwm-backlight";
-		default-brightness-level = <4>;
-		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		power-supply = <&reg_module_3v3>;
-		pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>;
-		status = "disabled";
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	extcon_usbc_det: usbc-det {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbc_det>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		key-wakeup {
-			debounce-interval = <10>;
-			gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
-			label = "Wake-Up";
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
-	};
-
-	panel_dpi: panel-dpi {
-		backlight = <&backlight>;
-		compatible = "edt,et057090dhu";
-		power-supply = <&reg_3v3>;
-		status = "disabled";
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "3.3V";
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "5V";
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "+V3.3";
-	};
-
-	reg_module_3v3_avdd: regulator-module-3v3-avdd {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "+V3.3_AVDD_AUDIO";
-	};
-
-	reg_module_3v3_eth: regulator-module-3v3-eth {
-		compatible = "regulator-fixed";
-		off-on-delay-us = <200000>;
-		regulator-name = "+V3.3_ETH";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		startup-delay-us = <200000>;
-		vin-supply = <&reg_LDO1>;
-	};
-
-	reg_usbh_vbus: regulator-usbh-vbus {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh_reg>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "VCC_USB[1-4]";
-		vin-supply = <&reg_5v0>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,format = "i2s";
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,name = "imx7-sgtl5000";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai1>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-			sound-dai = <&codec>;
-		};
-	};
-};
-
-/* Colibri AD0 to AD3 */
-&adc1 {
-	vref-supply = <&reg_DCDC3>;
-};
-
-/* ADC2 is not available as it conflicts with AD7879 resistive touchscreen. */
-
-&cpu0 {
-	cpu-supply = <&reg_DCDC2>;
-};
-
-/* Colibri SSP */
-&ecspi3 {
-	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* SODIMM 86 / SSPFRM */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>;
-};
-
-/* Colibri Fast Ethernet */
-&fec1 {
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
-	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-		 <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-		 <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
-		 <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
-	fsl,magic-packet;
-	phy-handle = <&ethphy0>;
-	phy-mode = "rmii";
-	phy-supply = <&reg_module_3v3_eth>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_enet1>;
-	pinctrl-1 = <&pinctrl_enet1_sleep>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Micrel KSZ8041RNL */
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			max-speed = <100>;
-			micrel,led-mode = <0>;
-			reg = <0>;
-		};
-	};
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-};
-
-&gpio1 {
-	gpio-line-names = "SODIMM_43",
-			  "SODIMM_45",
-			  "SODIMM_135",
-			  "SODIMM_22",
-			  "",
-			  "",
-			  "SODIMM_37",
-			  "SODIMM_29",
-			  "SODIMM_59",
-			  "SODIMM_28",
-			  "SODIMM_30",
-			  "SODIMM_67",
-			  "",
-			  "",
-			  "SODIMM_188",
-			  "SODIMM_178";
-};
-
-&gpio2 {
-	gpio-line-names = "SODIMM_111",
-			  "SODIMM_113",
-			  "SODIMM_115",
-			  "SODIMM_117",
-			  "SODIMM_119",
-			  "SODIMM_121",
-			  "SODIMM_123",
-			  "SODIMM_125",
-			  "SODIMM_91",
-			  "SODIMM_89",
-			  "SODIMM_105",
-			  "SODIMM_152",
-			  "SODIMM_150",
-			  "SODIMM_95",
-			  "SODIMM_126",
-			  "SODIMM_107",
-			  "SODIMM_114",
-			  "SODIMM_116",
-			  "SODIMM_118",
-			  "SODIMM_120",
-			  "SODIMM_122",
-			  "SODIMM_124",
-			  "SODIMM_127",
-			  "SODIMM_130",
-			  "SODIMM_132",
-			  "SODIMM_134",
-			  "SODIMM_133",
-			  "SODIMM_104",
-			  "SODIMM_106",
-			  "SODIMM_110",
-			  "SODIMM_112",
-			  "SODIMM_128";
-};
-
-&gpio3 {
-	gpio-line-names = "SODIMM_56",
-			  "SODIMM_44",
-			  "SODIMM_68",
-			  "SODIMM_82",
-			  "SODIMM_93",
-			  "SODIMM_76",
-			  "SODIMM_70",
-			  "SODIMM_60",
-			  "SODIMM_58",
-			  "SODIMM_78",
-			  "SODIMM_72",
-			  "SODIMM_80",
-			  "SODIMM_46",
-			  "SODIMM_62",
-			  "SODIMM_48",
-			  "SODIMM_74",
-			  "SODIMM_50",
-			  "SODIMM_52",
-			  "SODIMM_54",
-			  "SODIMM_66",
-			  "SODIMM_64",
-			  "SODIMM_57",
-			  "SODIMM_61",
-			  "SODIMM_136",
-			  "SODIMM_138",
-			  "SODIMM_140",
-			  "SODIMM_142",
-			  "SODIMM_144",
-			  "SODIMM_146";
-};
-
-&gpio4 {
-	gpio-line-names = "SODIMM_35",
-			  "SODIMM_33",
-			  "SODIMM_38",
-			  "SODIMM_36",
-			  "SODIMM_21",
-			  "SODIMM_19",
-			  "SODIMM_131",
-			  "SODIMM_129",
-			  "SODIMM_90",
-			  "SODIMM_92",
-			  "SODIMM_88",
-			  "SODIMM_86",
-			  "SODIMM_81",
-			  "SODIMM_94",
-			  "SODIMM_96",
-			  "SODIMM_75",
-			  "SODIMM_101",
-			  "SODIMM_103",
-			  "SODIMM_79",
-			  "SODIMM_97",
-			  "SODIMM_67",
-			  "SODIMM_59",
-			  "SODIMM_85",
-			  "SODIMM_65";
-};
-
-&gpio5 {
-	gpio-line-names = "SODIMM_69",
-			  "SODIMM_71",
-			  "SODIMM_73",
-			  "SODIMM_47",
-			  "SODIMM_190",
-			  "SODIMM_192",
-			  "SODIMM_49",
-			  "SODIMM_51",
-			  "SODIMM_53",
-			  "",
-			  "",
-			  "SODIMM_98",
-			  "SODIMM_184",
-			  "SODIMM_186",
-			  "SODIMM_23",
-			  "SODIMM_31",
-			  "SODIMM_100",
-			  "SODIMM_102";
-};
-
-&gpio6 {
-	gpio-line-names = "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_169",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_77",
-			  "SODIMM_24",
-			  "",
-			  "SODIMM_25",
-			  "SODIMM_27",
-			  "SODIMM_32",
-			  "SODIMM_34";
-};
-
-&gpio7 {
-	gpio-line-names = "",
-			  "",
-			  "SODIMM_63",
-			  "SODIMM_55",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_196",
-			  "SODIMM_194",
-			  "",
-			  "SODIMM_99",
-			  "",
-			  "",
-			  "SODIMM_137";
-};
-
-/* NAND on such SKUs */
-&gpmi {
-	fsl,use-minimum-ecc;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-};
-
-/* On-module Power I2C */
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
-	pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>;
-	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		#sound-dai-cells = <0>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sai1_mclk>;
-		reg = <0xa>;
-		VDDA-supply = <&reg_module_3v3_avdd>;
-		VDDD-supply = <&reg_DCDC3>;
-		VDDIO-supply = <&reg_module_3v3>;
-	};
-
-	ad7879_ts: touchscreen@2c {
-		adi,acquisition-time = /bits/ 8 <1>;
-		adi,averaging = /bits/ 8 <1>;
-		adi,conversion-interval = /bits/ 8 <255>;
-		adi,first-conversion-delay = /bits/ 8 <3>;
-		adi,median-filter-size = /bits/ 8 <2>;
-		adi,resistance-plate-x = <120>;
-		compatible = "adi,ad7879-1";
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-		reg = <0x2c>;
-		touchscreen-max-pressure = <4096>;
-		status = "disabled";
-	};
-
-	pmic@33 {
-		compatible = "ricoh,rn5t567";
-		reg = <0x33>;
-
-		regulators {
-			reg_DCDC1: DCDC1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1100000>;
-				regulator-min-microvolt = <1000000>;
-				regulator-name = "+V1.0_SOC";
-			};
-
-			reg_DCDC2: DCDC2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1100000>;
-				regulator-min-microvolt = <975000>;
-				regulator-name = "+V1.1_ARM";
-			};
-
-			reg_DCDC3: DCDC3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1800000>;
-				regulator-min-microvolt = <1800000>;
-				regulator-name = "+V1.8";
-			};
-
-			reg_DCDC4: DCDC4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1350000>;
-				regulator-min-microvolt = <1350000>;
-				regulator-name = "+V1.35_DRAM";
-			};
-
-			reg_LDO1: LDO1 {
-				regulator-boot-on;
-				regulator-max-microvolt = <3300000>;
-				regulator-min-microvolt = <3300000>;
-				regulator-name = "PWR_EN_+V3.3_ETH";
-			};
-
-			reg_LDO2: LDO2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3300000>;
-				regulator-min-microvolt = <1800000>;
-				regulator-name = "+V1.8_SD";
-			};
-
-			reg_LDO3: LDO3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3300000>;
-				regulator-min-microvolt = <3300000>;
-				regulator-name = "PWR_EN_+V3.3_LPSR";
-			};
-
-			reg_LDO4: LDO4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1800000>;
-				regulator-min-microvolt = <1800000>;
-				regulator-name = "+V1.8_LPSR";
-			};
-
-			reg_LDO5: LDO5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <3300000>;
-				regulator-min-microvolt = <3300000>;
-				regulator-name = "PWR_EN_+V3.3";
-			};
-		};
-	};
-};
-
-/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	pinctrl-1 = <&pinctrl_i2c4_recovery>;
-	scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "disabled";
-
-	/* Atmel maxtouch controller */
-	atmel_mxt_ts: touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		interrupt-parent = <&gpio2>;
-		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;        /* SODIMM 107 / INT */
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_atmel_connector>;
-		reg = <0x4a>;
-		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;      /* SODIMM 106 / RST */
-		status = "disabled";
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-		status = "disabled";
-	};
-};
-
-&lcdif {
-	assigned-clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_VIDEO_POST_DIV>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-	status = "disabled";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&lcd_panel_in>;
-		};
-	};
-};
-
-/* Colibri PWM<A> */
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-};
-
-/* Colibri PWM<B> */
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-};
-
-/* Colibri PWM<C> */
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-};
-
-/* Colibri PWM<D> */
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-};
-
-&reg_1p0d {
-	vin-supply = <&reg_DCDC3>; /* VDDA_1P8_IN */
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	status = "okay";
-};
-
-/* Colibri UART_A */
-&uart1 {
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	fsl,dte-mode;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
-	uart-has-rtscts;
-};
-
-/* Colibri UART_B */
-&uart2 {
-	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	fsl,dte-mode;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-};
-
-/* Colibri UART_C */
-&uart3 {
-	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	fsl,dte-mode;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-};
-
-/* Colibri USBC */
-&usbotg1 {
-	dr_mode = "otg";
-	extcon = <0>, <&extcon_usbc_det>;
-};
-
-/* Colibri MMC/SD */
-&usdhc1 {
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	no-1-8-v;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>;
-	pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_cd_usdhc1_sleep>;
-	vmmc-supply = <&reg_3v3>;
-	vqmmc-supply = <&reg_LDO2>;
-	wakeup-source;
-};
-
-/* eMMC on 1GB (eMMC) SKUs */
-&usdhc3 {
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	fsl,tuning-step = <2>;
-	non-removable;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	sdhci-caps-mask = <0x80000000 0x0>;
-	vmmc-supply = <&reg_module_3v3>;
-	vqmmc-supply = <&reg_DCDC3>;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
-
-	/*
-	 * Atmel MXT touchsceen + Capacitive Touch Adapter
-	 * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3.
-	 * Don't use them simultaneously.
-	 */
-	pinctrl_atmel_adapter: atmeladaptergrp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74 /* SODIMM 28 / INT */
-			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
-		>;
-	};
-
-	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
-	pinctrl_atmel_connector: atmelconnectorgrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 / RST */
-			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 / INT */
-		>;
-	};
-
-	pinctrl_can_int: canintgrp {
-		fsl,pins = <
-			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2 /* SODIMM 90 */
-			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2 /* SODIMM 92 */
-			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2 /* SODIMM 88 */
-		>;
-	};
-
-	pinctrl_ecspi3_cs: ecspi3csgrp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14 /* SODIMM 86 */
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x73
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x73
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x73
-			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x73
-			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
-			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
-		>;
-	};
-
-	pinctrl_enet1_sleep: enet1-sleepgrp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0		0x0
-			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1		0x0
-			MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5		0x0
-			MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4		0x0
-			MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6		0x0
-			MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7		0x0
-			MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10		0x0
-			MX7D_PAD_GPIO1_IO12__GPIO1_IO12			0x0
-			MX7D_PAD_SD2_CD_B__GPIO5_IO9			0x0
-			MX7D_PAD_SD2_WP__GPIO5_IO10			0x0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX	0x79 /* SODIMM 63 */
-			MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX	0x79 /* SODIMM 55 */
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x79 /* SODIMM 188 */
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x79 /* SODIMM 178 */
-		>;
-	};
-
-	pinctrl_gpio1: gpio1grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
-			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
-			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
-			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
-			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14 /* SODIMM 117 */
-			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14 /* SODIMM 119 */
-			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14 /* SODIMM 121 */
-			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14 /* SODIMM 123 */
-			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14 /* SODIMM 125 */
-			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x74 /* SODIMM 91 */
-			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x14 /* SODIMM 89 */
-			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x74 /* SODIMM 105 */
-			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x14 /* SODIMM 152 */
-			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14 /* SODIMM 150 */
-			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x14 /* SODIMM 126 */
-			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x14 /* SODIMM 132 */
-			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x14 /* SODIMM 134 */
-			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x14 /* SODIMM 133 */
-			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
-			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
-			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x14 /* SODIMM 128 */
-			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x14 /* SODIMM 122 */
-			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x14 /* SODIMM 124 */
-			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x14 /* SODIMM 127 */
-			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x14 /* SODIMM 130 */
-			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
-			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x14 /* SODIMM 116 */
-			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x14 /* SODIMM 118 */
-			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x14 /* SODIMM 120 */
-			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
-			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
-			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x14 /* SODIMM 169 */
-			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x14 /* SODIMM 77 */
-			MX7D_PAD_SD2_CLK__GPIO5_IO12		0x14 /* SODIMM 184 */
-			MX7D_PAD_SD2_CMD__GPIO5_IO13		0x14 /* SODIMM 186 */
-			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
-			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
-			MX7D_PAD_UART3_RTS_B__GPIO4_IO6		0x14 /* SODIMM 131 */
-		>;
-	};
-
-	pinctrl_gpio2: gpio2grp { /* On X22 Camera interface */
-		fsl,pins = <
-			MX7D_PAD_ECSPI1_MISO__GPIO4_IO18	0x14 /* SODIMM 79 */
-			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x14 /* SODIMM 103 */
-			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x14 /* SODIMM 101 */
-			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19		0x14 /* SODIMM 97 */
-			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x14 /* SODIMM 85 */
-			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x14 /* SODIMM 65 */
-			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x14 /* SODIMM 81 */
-			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x14 /* SODIMM 94 */
-			MX7D_PAD_I2C4_SCL__GPIO4_IO14		0x14 /* SODIMM 96 */
-			MX7D_PAD_I2C4_SDA__GPIO4_IO15		0x14 /* SODIMM 75 */
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x74 /* SODIMM 69 */
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14 /* SODIMM 98 */
-		>;
-	};
-
-	pinctrl_gpio3: gpio3grp { /* LCD 18-23 */
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA18__GPIO3_IO23		0x14 /* SODIMM 136 */
-			MX7D_PAD_LCD_DATA19__GPIO3_IO24		0x14 /* SODIMM 138 */
-			MX7D_PAD_LCD_DATA20__GPIO3_IO25		0x14 /* SODIMM 140 */
-			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x14 /* SODIMM 142 */
-			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x74 /* SODIMM 144 */
-			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x74 /* SODIMM 146 */
-		>;
-	};
-
-	pinctrl_gpio4: gpio4grp { /* Alternatively CAN2 */
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x14 /* SODIMM 188 */
-			MX7D_PAD_GPIO1_IO15__GPIO1_IO15		0x14 /* SODIMM 178 */
-		>;
-	};
-
-	pinctrl_gpio7: gpio7grp { /* Alternatively CAN1 */
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x14 /* SODIMM 63 */
-			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x14 /* SODIMM 55 */
-		>;
-	};
-
-	pinctrl_gpio_bl_on: gpioblongrp {
-		fsl,pins = <
-			MX7D_PAD_SD1_WP__GPIO5_IO1		0x14 /* SODIMM 71 */
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	0x71
-			MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	0x74
-			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
-			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
-			MX7D_PAD_SD3_DATA0__NAND_DATA00		0x71
-			MX7D_PAD_SD3_DATA1__NAND_DATA01		0x71
-			MX7D_PAD_SD3_DATA2__NAND_DATA02		0x71
-			MX7D_PAD_SD3_DATA3__NAND_DATA03		0x71
-			MX7D_PAD_SD3_DATA4__NAND_DATA04		0x71
-			MX7D_PAD_SD3_DATA5__NAND_DATA05		0x71
-			MX7D_PAD_SD3_DATA6__NAND_DATA06		0x71
-			MX7D_PAD_SD3_DATA7__NAND_DATA07		0x71
-			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
-			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
-		>;
-	};
-
-	pinctrl_i2c1_int: i2c1intgrp { /* PMIC / TOUCH */
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x79
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL	0x4000007f /* SODIMM 196 */
-			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f /* SODIMM 194 */
-		>;
-	};
-
-	pinctrl_i2c4_recovery: i2c4-recoverygrp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8	0x4000007f
-			MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9	0x4000007f
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79 /* SODIMM 76 */
-			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79 /* SODIMM 70 */
-			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79 /* SODIMM 60 */
-			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79 /* SODIMM 58 */
-			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79 /* SODIMM 78 */
-			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79 /* SODIMM 72 */
-			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79 /* SODIMM 80 */
-			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79 /* SODIMM 46 */
-			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79 /* SODIMM 62 */
-			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79 /* SODIMM 48 */
-			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79 /* SODIMM 74 */
-			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79 /* SODIMM 50 */
-			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79 /* SODIMM 52 */
-			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79 /* SODIMM 54 */
-			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79 /* SODIMM 66 */
-			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79 /* SODIMM 64 */
-			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79 /* SODIMM 57 */
-			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79 /* SODIMM 61 */
-		>;
-	};
-
-	pinctrl_lcdif_dat_24: lcdifdat24grp {
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79 /* SODIMM 136 */
-			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79 /* SODIMM 138 */
-			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79 /* SODIMM 140 */
-			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79 /* SODIMM 142 */
-			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79 /* SODIMM 144 */
-			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79 /* SODIMM 146 */
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX7D_PAD_LCD_CLK__LCD_CLK		0x79 /* SODIMM 56 */
-			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79 /* SODIMM 44 */
-			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79 /* SODIMM 68 */
-			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79 /* SODIMM 82 */
-		>;
-	};
-
-	pinctrl_lvds_transceiver: lvdstx {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2     0x14 /* SODIMM 63 */
-			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3     0x74 /* SODIMM 55 */
-			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11    0x14 /* SODIMM 99 */
-			MX7D_PAD_EPDC_DATA13__GPIO2_IO13        0x14 /* SODIMM 95 */
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x4  /* SODIMM 59 */
-			MX7D_PAD_GPIO1_IO08__PWM1_OUT		0x79 /* SODIMM 59 */
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x79 /* SODIMM 28 */
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__PWM3_OUT		0x79 /* SODIMM 30 */
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x4  /* SODIMM 67 */
-			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x79 /* SODIMM 67 */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS	0x79 /* SODIMM 25 */
-			MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS	0x79 /* SODIMM 27 */
-			MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX	0x79 /* SODIMM 35 */
-			MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX	0x79 /* SODIMM 33 */
-		>;
-	};
-
-	pinctrl_uart1_ctrl1: uart1ctrl1grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_DATA0__GPIO5_IO14		0x14 /* SODIMM 23 / DTR */
-			MX7D_PAD_SD2_DATA1__GPIO5_IO15		0x14 /* SODIMM 31 / DCD */
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS	0x79 /* SODIMM 32 / CTS */
-			MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS	0x79 /* SODIMM 34 / RTS */
-			MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX	0x79 /* SODIMM 38 */
-			MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX	0x79 /* SODIMM 36 */
-		>;
-	};
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX	0x79 /* SODIMM 21 */
-			MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX	0x79 /* SODIMM 19 */
-		>;
-	};
-
-	pinctrl_usbc_det: usbcdetgrp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x14 /* SODIMM 137 / USBC_DET */
-		>;
-	};
-
-	pinctrl_usbh_reg: usbhreggrp {
-		fsl,pins = <
-			MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14 /* SODIMM 129 / USBH_PEN */
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x19 /* SODIMM 47 */
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x59 /* SODIMM 190 */
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59 /* SODIMM 192 */
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59 /* SODIMM 49 */
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59 /* SODIMM 51 */
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59 /* SODIMM 53 */
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
-		>;
-	};
-
-	/* Avoid backfeeding with removed card power. */
-	pinctrl_usdhc1_sleep: usdhc1-slpgrp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x10
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x10
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x10
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x10
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x10
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x10
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x19
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
-		>;
-	};
-
-	pinctrl_sai1: sai1grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
-			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
-			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
-			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
-		>;
-	};
-
-	pinctrl_sai1_mclk: sai1mclkgrp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio_lpsr>;
-
-	pinctrl_cd_usdhc1: cdusdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59 /* SODIMM 43 / MMC_CD */
-		>;
-	};
-
-	pinctrl_cd_usdhc1_sleep: cdusdhc1-slpgrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x0
-		>;
-	};
-
-	pinctrl_gpio_lpsr: gpiolpsrgrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x59 /* SODIMM 135 */
-			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x59 /* SODIMM 22 */
-		>;
-	};
-
-	pinctrl_gpiokeys: gpiokeysgrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x19 /* SODIMM 45 / WAKE_UP */
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL	0x4000007f
-			MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA	0x4000007f
-		>;
-	};
-
-	pinctrl_i2c1_recovery: i2c1-recoverygrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x4000007f
-			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x4000007f
-		>;
-	};
-
-	pinctrl_uart1_ctrl2: uart1ctrl2grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14 /* SODIMM 37 / RI */
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x14 /* SODIMM 29 / DSR */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
deleted file mode 100644
index 3df6dff7734ae..0000000000000
--- a/arch/arm/boot/dts/imx7-mba7.dtsi
+++ /dev/null
@@ -1,640 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Include file for TQ-Systems MBa7 carrier board.
- *
- * Copyright (C) 2016 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- *
- * Note: This file does not include nodes for all peripheral devices.
- * As device driver coverage increases additional nodes can be added.
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
-	aliases {
-		mmc0 = &usdhc3;
-		mmc1 = &usdhc1;
-		/delete-property/ mmc2;
-	};
-
-	beeper {
-		compatible = "gpio-beeper";
-		gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>;
-	};
-
-	chosen {
-		stdout-path = &uart6;
-	};
-
-	gpio_buttons: gpio-keys {
-		compatible = "gpio-keys";
-
-		button-0 {
-			/* #SWITCH_A */
-			label = "S11";
-			linux,code = <KEY_1>;
-			gpios = <&pca9555 13 GPIO_ACTIVE_LOW>;
-		};
-
-		button-1 {
-			/* #SWITCH_B */
-			label = "S12";
-			linux,code = <KEY_2>;
-			gpios = <&pca9555 14 GPIO_ACTIVE_LOW>;
-		};
-
-		button-2 {
-			/* #SWITCH_C */
-			label = "S13";
-			linux,code = <KEY_3>;
-			gpios = <&pca9555 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "led1";
-			gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_sd1_vmmc: regulator-sd1-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3_SD1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_fec1_pwdn: regulator-fec1-pwdn {
-		compatible = "regulator-fixed";
-		regulator-name = "PWDN_FEC1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_fec2_pwdn: regulator-fec2-pwdn {
-		compatible = "regulator-fixed";
-		regulator-name = "PWDN_FEC2";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS_USBOTG1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS_USBOTG2";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_mpcie_1v5: regulator-mpcie-1v5 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V5_MPCIE";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_mpcie_3v3: regulator-mpcie-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3_MPCIE";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_mba_12v0: regulator-mba-12v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC12V0_MBA7";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		gpio = <&pca9555 11 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lvds_transmitter: regulator-lvds-transmitter {
-		compatible = "regulator-fixed";
-		regulator-name = "#SHTDN_LVDS";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vref_1v8: regulator-vref-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V8_REF";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		vin-supply = <&sw2_reg>;
-	};
-
-	reg_audio_3v3: regulator-audio-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "imx-audio-tlv320aic32x4";
-		ssi-controller = <&sai1>;
-		audio-codec = <&tlv320aic32x4>;
-		audio-routing =
-			"IN3_L", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"IN1_L", "Line In Jack",
-			"IN1_R", "Line In Jack",
-			"Line Out Jack", "LOL",
-			"Line Out Jack", "LOR";
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&adc2 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>,
-		   <&gpio4 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	phy-supply = <&reg_fec1_pwdn>;
-	phy-handle = <&ethphy1_0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1_0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
-			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
-			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
-		};
-	};
-};
-
-&flash0 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uboot@0 {
-			label = "U-Boot";
-			reg = <0x0 0xd0000>;
-		};
-
-		env1@d0000 {
-			label = "ENV1";
-			reg = <0xd0000 0x10000>;
-		};
-
-		env2@e0000 {
-			label = "ENV2";
-			reg = <0xe0000 0x10000>;
-		};
-
-		dtb@f0000 {
-			label = "DTB";
-			reg = <0xf0000 0x10000>;
-		};
-
-		linux@100000 {
-			label = "Linux";
-			reg = <0x100000 0x700000>;
-		};
-
-		rootfs@800000 {
-			label = "RootFS";
-			reg = <0x800000 0x3800000>;
-		};
-	};
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&i2c1 {
-	lm75: temperature-sensor@49 {
-		compatible = "national,lm75";
-		reg = <0x49>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	tlv320aic32x4: audio-codec@18 {
-		compatible = "ti,tlv320aic32x4";
-		reg = <0x18>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		clock-names = "mclk";
-		ldoin-supply = <&reg_audio_3v3>;
-		iov-supply = <&reg_audio_3v3>;
-	};
-
-	pca9555: gpio-expander@20 {
-		compatible = "nxp,pca9555";
-		reg = <0x20>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pca9555>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_mba7_1>;
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO		0x7c
-			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI		0x74
-			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK		0x74
-			MX7D_PAD_UART1_RX_DATA__GPIO4_IO0		0x74
-			MX7D_PAD_UART1_TX_DATA__GPIO4_IO1		0x74
-			MX7D_PAD_UART2_RX_DATA__GPIO4_IO2		0x74
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c
-			MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74
-			MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74
-			MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0			0x74
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x02
-			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x00
-			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x71
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71
-			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x71
-			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x71
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x79
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x79
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x79
-			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x79
-			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x79
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79
-			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
-			MX7D_PAD_ENET1_COL__GPIO7_IO15		0x40000070
-			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
-			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x40000078
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x5a
-			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x52
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x5a
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x52
-		>;
-	};
-
-	pinctrl_hog_mba7_1: hogmba71grp {
-		fsl,pins = <
-			/* Limitation: WDOG2_B / WDOG2_RESET not usable */
-			MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13	0x4000007c
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x40000074
-			/* #BOOT_EN */
-			MX7D_PAD_UART2_TX_DATA__GPIO4_IO3	0x40000010
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000078
-			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000078
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x40000078
-			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x40000078
-		>;
-	};
-
-	pinctrl_pca9555: pca95550grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x78
-		>;
-	};
-
-	pinctrl_sai1: sai1grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_MCLK__SAI1_MCLK		0x11
-			MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK	0x1c
-			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1c
-			MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC	0x1c
-
-			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1c
-			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x14
-			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x14
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x7e
-			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x76
-			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x76
-			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x7e
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e
-			MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76
-			MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS	0x76
-			MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS	0x7e
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x7e
-			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x76
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x7d
-			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x75
-			MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x75
-			MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x7d
-		>;
-	};
-
-	pinctrl_uart7: uart7grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA12__UART7_DCE_RX	0x7e
-			MX7D_PAD_EPDC_DATA13__UART7_DCE_TX	0x76
-			MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS	0x76
-			/* Limitation: RTS is not connected */
-			MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS	0x7e
-		>;
-	};
-
-	pinctrl_usdhc1_gpio: usdhc1grp_gpio {
-		fsl,pins = <
-			/* WP */
-			MX7D_PAD_SD1_WP__GPIO5_IO1		0x7c
-			/* CD */
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x7c
-			/* VSELECT */
-			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5e
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5e
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5e
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5e
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5e
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			/* LCD_CONTRAST */
-			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x50
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x5c
-			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
-		>;
-	};
-
-	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
-		>;
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
-			  <&clks IMX7D_SAI1_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <36864000>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart7>;
-	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	uart-has-rtscts;
-	linux,rs485-enabled-at-boot-time;
-	rs485-rts-active-low;
-	rs485-rx-during-tx;
-	status = "okay";
-};
-
-&usbh {
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	over-current-active-low;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_sd1_vmmc>;
-	bus-width = <4>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-	fsl,ext-reset-output;
-};
diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi
deleted file mode 100644
index fe42b0a468310..0000000000000
--- a/arch/arm/boot/dts/imx7-tqma7.dtsi
+++ /dev/null
@@ -1,292 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB.
- *
- * Copyright (C) 2016 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		/* 512 MB - default configuration */
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&gpio2 {
-	/* Configured as pullup by QSPI pin group */
-	qspi-reset-hog {
-		gpio-hog;
-		gpios = <4 GPIO_ACTIVE_LOW>;
-		input;
-		line-name = "qspi-reset";
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pfuze3000: pmic@8 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic1>;
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97b: temperature-sensor-eeprom@1e {
-		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
-		reg = <0x1e>;
-		status = "okay";
-	};
-
-	/* ST M24C64 */
-	m24c64: eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-		status = "okay";
-	};
-
-	at24c02: eeprom@56 {
-		compatible = "atmel,24c02";
-		reg = <0x56>;
-		pagesize = <16>;
-		status = "okay";
-	};
-
-	ds1339: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA	0x40000078
-			MX7D_PAD_I2C1_SCL__I2C1_SCL	0x40000078
-		>;
-	};
-
-	pinctrl_pmic1: pmic1grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x4000005C
-		>;
-	};
-
-	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0	0x5A
-			MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1	0x5A
-			MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2	0x5A
-			MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3	0x5A
-			MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK	0x11
-			MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B	0x54
-			MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B	0x54
-		>;
-	};
-
-	pinctrl_qspi_reset: qspi_resetgrp {
-		fsl,pins = <
-			/* #QSPI_RESET */
-			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x52
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x56
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD               0x5a
-			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
-			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5a
-			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5a
-			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5a
-			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5a
-			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5a
-			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5a
-			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5a
-			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5a
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD               0x5b
-			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
-			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5b
-			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5b
-			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5b
-			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5b
-			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5b
-			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5b
-			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5b
-			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5b
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
-		>;
-	};
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>;
-	status = "okay";
-
-	flash0: flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <29000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
-	};
-};
-
-&sdma {
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&vgen4_reg>;
-	vqmmc-supply = <&sw2_reg>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-	/*
-	 * Errata e10574:
-	 * WDOG reset needs to run with WDOG_RESET_B signal enabled.
-	 * X1-51 (WDOG1#) signal needs carrier board handling to reset
-	 * TQMa7 on X1-22 (RESET_IN#).
-	 */
-	fsl,ext-reset-output;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
deleted file mode 100644
index 713483c39c9d0..0000000000000
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * Support for CompuLab CL-SOM-iMX7 System-on-Module
- *
- * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
- * Author: Ilya Ledvich <ilya@compulab.co.il>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- */
-
-/dts-v1/;
-
-#include "imx7d.dtsi"
-
-/ {
-	model = "CompuLab CL-SOM-iMX7";
-	compatible = "compulab,cl-som-imx7", "fsl,imx7d";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
-	};
-
-	reg_usb_otg1_vbus: regulator-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&cpu1 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-		};
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy1>;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pmic@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x8>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	pca9555: pca9555@20 {
-		compatible = "nxp,pca9555";
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0x20>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	fsl,tuning-step = <2>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x30
-			MX7D_PAD_SD2_WP__ENET1_MDC			0x30
-			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x11
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x11
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x11
-			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x11
-			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x11
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x11
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x11
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x11
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x11
-			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x11
-			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x11
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x11
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x11
-			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x11
-			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x11
-			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x11
-			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x11
-			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x11
-			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x11
-			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x11
-			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x11
-			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x11
-			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x11
-			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x11
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
-			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x14 /* OTG PWREN */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-aster.dts b/arch/arm/boot/dts/imx7d-colibri-aster.dts
deleted file mode 100644
index 00ab92e56da4d..0000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-aster.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017-2022 Toradex
- */
-
-/dts-v1/;
-#include "imx7d-colibri.dtsi"
-#include "imx7-colibri-aster.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D on Aster Carrier Board";
-	compatible = "toradex,colibri-imx7d-aster",
-		     "toradex,colibri-imx7d",
-		     "fsl,imx7d";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
-
-/* Colibri USBH */
-&usbotg2 {
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
deleted file mode 100644
index d9c7045a55ba5..0000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017-2022 Toradex
- *
- */
-
-/dts-v1/;
-#include "imx7d-colibri-emmc.dtsi"
-#include "imx7-colibri-aster.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board";
-	compatible = "toradex,colibri-imx7d-emmc-aster",
-		     "toradex,colibri-imx7d-emmc",
-		     "toradex,colibri-imx7d",
-		     "fsl,imx7d";
-};
-
-/* Colibri USBH */
-&usbotg2 {
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
deleted file mode 100644
index 96b599439dded..0000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017-2022 Toradex
- */
-
-/dts-v1/;
-#include "imx7d-colibri-emmc.dtsi"
-#include "imx7-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx7d-emmc-eval-v3",
-		     "toradex,colibri-imx7d-emmc",
-		     "toradex,colibri-imx7d",
-		     "fsl,imx7d";
-};
-
-/* Colibri USBH */
-&usbotg2 {
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts
deleted file mode 100644
index 5eccb837b1584..0000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/dts-v1/;
-#include "imx7d-colibri-emmc.dtsi"
-#include "imx7-colibri-iris-v2.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D 1GB on Iris V2 Carrier Board";
-	compatible = "toradex,colibri-imx7d-emmc-iris-v2",
-		     "toradex,colibri-imx7d-emmc",
-		     "toradex,colibri-imx7d",
-		     "fsl,imx7d";
-};
-
-/* Colibri USBH */
-&usbotg2 {
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts
deleted file mode 100644
index ae10e8a66ff19..0000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/dts-v1/;
-#include "imx7d-colibri-emmc.dtsi"
-#include "imx7-colibri-iris.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D 1GB on Iris Carrier Board";
-	compatible = "toradex,colibri-imx7d-emmc-iris",
-		     "toradex,colibri-imx7d-emmc",
-		     "toradex,colibri-imx7d",
-		     "fsl,imx7d";
-};
-
-/* Colibri USBH */
-&usbotg2 {
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
deleted file mode 100644
index 3740e34ef99f1..0000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017-2022 Toradex
- */
-
-#include "imx7d.dtsi"
-#include "imx7-colibri.dtsi"
-
-/ {
-	aliases {
-		/* Required to properly pass MAC addresses from bootloader. */
-		ethernet0 = &fec1;
-		ethernet1 = &fec2;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-};
-
-&cpu1 {
-	cpu-supply = <&reg_DCDC2>;
-};
-
-&gpio6 {
-	gpio-line-names = "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_169",
-			  "SODIMM_157",
-			  "",
-			  "SODIMM_163",
-			  "SODIMM_77",
-			  "SODIMM_24",
-			  "",
-			  "SODIMM_25",
-			  "SODIMM_27",
-			  "SODIMM_32",
-			  "SODIMM_34";
-};
-
-/* Colibri USBH */
-&usbotg2 {
-	disable-over-current;
-	dr_mode = "host";
-	vbus-supply = <&reg_usbh_vbus>;
-};
-
-/* eMMC */
-&usdhc3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
deleted file mode 100644
index 33d787617db0d..0000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2016-2022 Toradex
- */
-
-/dts-v1/;
-#include "imx7d-colibri.dtsi"
-#include "imx7-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx7d-eval-v3",
-		     "toradex,colibri-imx7d",
-		     "fsl,imx7d";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-/*
- * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
- * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
- */
-&atmel_mxt_ts {
-	status = "disabled";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
-
-/* Colibri PWM<B> */
-&pwm2 {
-	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
-	status = "okay";
-};
-
-/* Colibri PWM<C> */
-&pwm3 {
-	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
-	status = "okay";
-};
-
-/* Colibri USBH */
-&usbotg2 {
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts b/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts
deleted file mode 100644
index afdb1d06c7f61..0000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/dts-v1/;
-#include "imx7d-colibri.dtsi"
-#include "imx7-colibri-iris-v2.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D on Iris V2 Carrier Board";
-	compatible = "toradex,colibri-imx7d-iris-v2",
-		     "toradex,colibri-imx7d",
-		     "fsl,imx7d";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&gpio2 {
-	/*
-	 * This switches the LVDS transceiver to VESA color mapping mode.
-	 */
-	lvds-color-map-hog {
-		gpio-hog;
-		gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
-		line-name = "LVDS_COLOR_MAP";
-		output-low;
-	};
-};
-
-&gpio7 {
-	/*
-	 * This switches the LVDS transceiver to the 24-bit RGB mode.
-	 */
-	lvds-rgb-mode-hog {
-		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
-		line-name = "LVDS_RGB_MODE";
-		output-low;
-	};
-
-	/*
-	 * This switches the LVDS transceiver to the single-channel
-	 * output mode.
-	 */
-	lvds-ch-mode-hog {
-		gpio-hog;
-		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
-		line-name = "LVDS_CH_MODE";
-		output-high;
-	};
-
-	/* This turns the LVDS transceiver on */
-	lvds-power-on-hog {
-		gpio-hog;
-		gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
-		line-name = "LVDS_POWER_ON";
-		output-high;
-	};
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
-
-/* Colibri USBH */
-&usbotg2 {
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-iris.dts b/arch/arm/boot/dts/imx7d-colibri-iris.dts
deleted file mode 100644
index 531b0b99bd5ab..0000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-iris.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/dts-v1/;
-#include "imx7d-colibri.dtsi"
-#include "imx7-colibri-iris.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D on Iris Carrier Board";
-	compatible = "toradex,colibri-imx7d-iris",
-		     "toradex,colibri-imx7d",
-		     "fsl,imx7d";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-/*
- * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
- * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
- */
-&atmel_mxt_ts {
-	status = "disabled";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
-
-/* Colibri PWM<B> */
-&pwm2 {
-	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
-	status = "okay";
-};
-
-/* Colibri PWM<C> */
-&pwm3 {
-	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
-	status = "okay";
-};
-
-/* Colibri USBH */
-&usbotg2 {
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
deleted file mode 100644
index 531a45b176a1f..0000000000000
--- a/arch/arm/boot/dts/imx7d-colibri.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2016-2022 Toradex
- */
-
-#include "imx7d.dtsi"
-#include "imx7-colibri.dtsi"
-
-/ {
-	aliases {
-		/* Required to properly pass MAC addresses from bootloader. */
-		ethernet0 = &fec1;
-		ethernet1 = &fec2;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&cpu1 {
-	cpu-supply = <&reg_DCDC2>;
-};
-
-/* NAND */
-&gpmi {
-	status = "okay";
-};
-
-/* Colibri USBH */
-&usbotg2 {
-	dr_mode = "host";
-	vbus-supply = <&reg_usbh_vbus>;
-};
diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts b/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts
deleted file mode 100644
index a6d68165fb1e9..0000000000000
--- a/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Kamstrup OMNIA Flex Concentrator in
- * manufacturing/debugging mode.
- *
- * Copyright (C) 2020 Kamstrup A/S
- * Author: Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-/dts-v1/;
-
-#include "imx7d-flex-concentrator.dts"
-
-/ {
-	model = "Kamstrup OMNIA Flex Concentrator - Manufacturing";
-	compatible = "kam,imx7d-flex-concentrator-mfg", "fsl,imx7d";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-};
-
-&uart4 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/imx7d-flex-concentrator.dts
deleted file mode 100644
index bd6b5285aa8d2..0000000000000
--- a/arch/arm/boot/dts/imx7d-flex-concentrator.dts
+++ /dev/null
@@ -1,315 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Kamstrup OMNIA Flex Concentrator.
- *
- * Copyright (C) 2020 Kamstrup A/S
- * Author: Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-/dts-v1/;
-
-#include "imx7d-tqma7.dtsi"
-
-/* One I2C device on TQMa7 SoM is not mounted */
-/delete-node/ &ds1339;
-
-/ {
-	model = "Kamstrup OMNIA Flex Concentrator";
-	compatible = "kam,imx7d-flex-concentrator", "fsl,imx7d";
-
-	memory@80000000 {
-		device_type = "memory";
-		/* 1024 MB - TQMa7D board configuration */
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS_USBOTG2";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vref_1v8: regulator-vref-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V8_REF";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		vin-supply = <&sw2_reg>;
-	};
-
-	/*
-	 * Human Machine Interface consists of 4 dual red/green LEDs.
-	 * hmi-a:green is controlled directly by the switch-mode power supply.
-	 * hmi-a:red is not used.
-	 */
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-0 {
-			label = "hmi-b:red:heartbeat-degraded";
-			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-1 {
-			label = "hmi-b:green:heartbeat-running";
-			gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-2 {
-			label = "hmi-c:red:mesh-error";
-			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-3 {
-			label = "hmi-c:green:mesh-activity";
-			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-4 {
-			label = "hmi-d:red:omnia-error";
-			gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-5 {
-			label = "hmi-d:green:omnia-activity";
-			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	/*
-	 * Errata e10574 board restart workaround.
-	 */
-	gpio-restart {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_restart>;
-		compatible = "gpio-restart";
-		gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
-		priority = <200>;
-	};
-};
-
-/*
- * Analog signals
- * ADC1_IN0: SMPS - 5V output monitor (voltage divider: 1/0.2806)
- */
-&adc1 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	num-chipselects = <1>;
-	cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pcf2127: rtc@0 {
-		compatible = "nxp,pcf2127";
-		reg = <0>;
-		spi-max-frequency = <2000000>;
-		reset-source;
-	};
-};
-
-&ecspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	num-chipselects = <1>;
-	cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	/*
-	 * ST chip maximum SPI clock frequency is 33 MHz.
-	 *
-	 * TCG specification - Section 6.4.1 Clocking:
-	 * TPM shall support a SPI clock frequency range of 10-24 MHz.
-	 */
-	st33htph: tpm-tis@0 {
-		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy>;
-	status = "okay";
-
-	/*
-	 * MDIO bus reset is used to generate PHY device reset before
-	 * Ethernet PHY type ID auto-detection. Otherwise this communication
-	 * fails as device does not answer when recommended reset circuit
-	 * is used.
-	 */
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reset-delay-us = <100000>;
-		reset-post-delay-us = <500000>;
-		reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
-
-		/* Microchip/Micrel KSZ8081RNB */
-		ethphy: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			interrupt-parent = <&gpio1>;
-			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
-			reg = <1>;
-		};
-	};
-};
-
-/*
- * Detection signals for internal USB modules.
- * Used for robust USB plug and play handling such as USB downstream port
- * power-cycle and USB hub reset in case of misbehaving or crashed modules.
- *
- * SMPS - AC input monitor based on zero crossing.
- * Used for last gasp notification.
- */
-&gpio3 {
-	gpio-line-names = "", "", "", "", "", "", "", "",
-	"", "", "", "", "smps-ac-monitor", "", "usb-hub-reset", "",
-	"", "", "", "", "", "", "", "",
-	"", "module-b-detection", "", "module-a-detection", "", "", "", "";
-};
-
-/*
- * Tamper IRQ trigger timestamp reading.
- * Used for sealed cover opened/closed notification.
- */
-&gpio5 {
-	gpio-line-names = "", "", "", "", "", "", "", "",
-	"", "", "", "", "rtc-tamper-irq", "", "", "",
-	"", "", "", "", "", "", "", "",
-	"", "", "", "", "", "", "", "";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_misc>;
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c /* X2-15 */
-			MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74 /* X2-18 */
-			MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74 /* X2-13 */
-			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23			0x74 /* X2-20 */
-			/* RTC - Tamper IRQ */
-			MX7D_PAD_SD2_CLK__GPIO5_IO12			0x3c /* X1-92 */
-		>;
-	};
-
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX7D_PAD_LCD_CLK__ECSPI4_MISO			0x7c /* X2-72 */
-			MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI		0x74 /* X2-68 */
-			MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK			0x74 /* X2-76 */
-			MX7D_PAD_LCD_VSYNC__GPIO3_IO3			0x74 /* X2-78 */
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x03 /* X2-48 */
-			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x03 /* X2-46 */
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71 /* X2-53 */
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71 /* X2-55 */
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71 /* X2-61 */
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x79 /* X2-56 */
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x79 /* X2-58 */
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79 /* X2-64 */
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73 /* X2-52 */
-			/* PHY reset: SRE_FAST, DSE_X1 */
-			MX7D_PAD_ENET1_COL__GPIO7_IO15			0x00 /* X1-96 */
-			/* Clock from PHY to MAC: 100kPU */
-			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x70 /* X3-4 */
-			/* PHY interrupt: 100kPU, HYS */
-			MX7D_PAD_GPIO1_IO09__GPIO1_IO9			0x78 /* X1-80 */
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA01__GPIO3_IO6			0x14 /* X2-82 */
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28			0x14 /* X1-82 */
-			MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x14 /* X1-84 */
-			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x14 /* X1-86 */
-			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31		0x14 /* X1-88 */
-			MX7D_PAD_UART2_TX_DATA__GPIO4_IO3		0x14 /* X1-90 */
-		>;
-	};
-
-	pinctrl_misc: miscgrp {
-		fsl,pins = <
-			/* Module A detection (low = present) */
-			MX7D_PAD_LCD_DATA22__GPIO3_IO27			0x7c /* X2-105 */
-			/* Module B detection (low = present) */
-			MX7D_PAD_LCD_DATA20__GPIO3_IO25			0x7c /* X2-103 */
-			/* SMPS - AC input monitor (high = failure) */
-			MX7D_PAD_LCD_DATA07__GPIO3_IO12			0x7c /* X2-88 */
-			/* USB - Hub reset */
-			MX7D_PAD_LCD_DATA09__GPIO3_IO14			0x74 /* X2-92 */
-		>;
-	};
-
-	pinctrl_restart: restartgrp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x74 /* X1-94 */
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e /* X3-14 */
-			MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76 /* X3-16 */
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_usbotg2: usbotg2grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c /* X3-11 */
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59 /* X3-9 */
-		>;
-	};
-
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-};
-
-&usbotg2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg2>;
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	over-current-active-low;
-	dr_mode = "host";
-	status = "okay";
-};
-
-/*
- * External watchdog feature provided by pcf2127.
- */
-&wdog1 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts
deleted file mode 100644
index 32bf9fa9d00e1..0000000000000
--- a/arch/arm/boot/dts/imx7d-mba7.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Source for TQ-Systems TQMa7D board on MBa7 carrier board.
- *
- * Copyright (C) 2016 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-/dts-v1/;
-
-#include "imx7d-tqma7.dtsi"
-#include "imx7-mba7.dtsi"
-
-/ {
-	model = "TQ-Systems TQMa7D board on MBa7 carrier board";
-	compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	phy-supply = <&reg_fec2_pwdn>;
-	phy-handle = <&ethphy2_0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy2_0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
-			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
-			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_mba7_1>;
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CD_B__ENET2_MDIO			0x02
-			MX7D_PAD_SD2_WP__ENET2_MDC			0x00
-			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x71
-			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x71
-			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x71
-			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x71
-			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x71
-			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x71
-			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x79
-			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x79
-			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x79
-			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x79
-			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x79
-			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x79
-			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x40000070
-			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
-			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x40000078
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			/* #pcie_wake */
-			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x70
-			/* #pcie_rst */
-			MX7D_PAD_SD2_CLK__GPIO5_IO12			0x70
-			/* #pcie_dis */
-			MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x70
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_usbotg2: usbotg2grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59
-		>;
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	/* 1.5V logically from 3.3V */
-	/* probe deferral not supported */
-	/* pcie-bus-supply = <&reg_mpcie_1v5>; */
-	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usbotg2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg2>;
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	dr_mode = "host";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts
deleted file mode 100644
index dd8003bd1fc09..0000000000000
--- a/arch/arm/boot/dts/imx7d-meerkat96.dts
+++ /dev/null
@@ -1,375 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright (C) 2019 Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include "imx7d.dtsi"
-
-/ {
-	model = "96Boards Meerkat96 Board";
-	compatible = "novtech,imx7d-meerkat96", "fsl,imx7d";
-
-	chosen {
-		stdout-path = &uart6;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512MB */
-	};
-
-	reg_wlreg_on: regulator-wlreg-on {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wlreg_on>;
-		regulator-name = "wlreg_on";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100>;
-		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led1 {
-			label = "green:user1";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led2 {
-			label = "green:user2";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led3 {
-			label = "green:user3";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-
-		led4 {
-			label = "green:user4";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-			default-state = "off";
-			panic-indicator;
-		};
-
-		led5 {
-			label = "yellow:wlan";
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tx";
-			default-state = "off";
-		};
-
-		led6 {
-			label = "blue:bt";
-			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "bluetooth-power";
-			default-state = "off";
-		};
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-};
-
-&uart7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart7 &pinctrl_bt_gpios>;
-	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		device-wakeup-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	keep-power-in-suspend;
-	fsl,tuning-step = <2>;
-	vmmc-supply = <&reg_3p3v>;
-	no-1-8-v;
-	broken-cd;
-	status = "okay";
-};
-
-&usdhc3 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	no-1-8-v;
-	no-mmc;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_wlreg_on>;
-	vqmmc-supply =<&reg_3p3v>;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wlan_irq>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-	};
-};
-
-&iomuxc {
-	pinctrl_bt_gpios: btgpiosgrp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x59
-			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x1f
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59
-			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x59
-			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
-			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x59
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59
-			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
-			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
-			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA	0x4000007f
-			MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL	0x4000007f
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
-			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_lcdif: lcdifgrp {
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
-			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
-			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
-			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
-			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
-			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
-			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
-			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
-			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
-			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
-			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
-			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
-			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
-			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
-			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
-			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
-			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
-			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
-			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
-			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
-			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
-			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
-			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
-			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
-			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
-			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
-			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
-			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
-			MX7D_PAD_LCD_RESET__LCD_RESET		0x79
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_DATA4__UART3_DCE_RX	0x79
-			MX7D_PAD_SD3_DATA5__UART3_DCE_TX	0x79
-			MX7D_PAD_SD3_DATA6__UART3_DCE_RTS	0x79
-			MX7D_PAD_SD3_DATA7__UART3_DCE_CTS	0x79
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CD_B__UART6_DCE_RX		0x79
-			MX7D_PAD_SD1_WP__UART6_DCE_TX		0x79
-		>;
-	};
-
-	pinctrl_uart7: uart7grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX	0x79
-			MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX	0x79
-			MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS	0x79
-			MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS	0x79
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x0D
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-		>;
-	};
-
-	pinctrl_wlan_irq: wlanirqgrp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14	0x19
-		>;
-	};
-
-	pinctrl_wlreg_on: wlregongrp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15	0x19
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
deleted file mode 100644
index a31de900139d6..0000000000000
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ /dev/null
@@ -1,699 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2016 Boundary Devices, Inc.
- */
-
-/dts-v1/;
-
-#include "imx7d.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX7 Nitrogen7 Board";
-	compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	backlight-j9 {
-		compatible = "gpio-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight_j9>;
-		gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		default-on;
-	};
-
-	backlight_lcd: backlight-j20 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_can2_3v3: regulator-can2-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can2-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_vref_1v8: regulator-vref-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_vref_3v3: regulator-vref-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_wlan: regulator-wlan {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "reg_wlan";
-		startup-delay-us = <70000>;
-		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	usdhc2_pwrseq: usdhc2_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
-		clock-names = "ext_clock";
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&adc2 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
-			  <&clks IMX7D_CLKO2_ROOT_DIV>;
-	assigned-clock-parents = <&clks IMX7D_CKIL>;
-	assigned-clock-rates = <0>, <32768>;
-};
-
-&cpu0 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&cpu1 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@4 {
-			reg = <4>;
-		};
-	};
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can2_3v3>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze3000@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	rtc@68 {
-		compatible = "microcrystal,rv4162";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2_rv4162>;
-		reg = <0x68>;
-		interrupts-extended = <&gpio2 15 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touch@48 {
-		compatible = "ti,tsc2004";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3_tsc2004>;
-		interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	codec: wm8960@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		clock-names = "mclk";
-		wlf,shared-lrclk;
-	};
-};
-
-&lcdif {
-	status = "okay";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg2>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&vgen3_reg>;
-	bus-width = <4>;
-	fsl,tuning-step = <2>;
-	wakeup-source;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_wlan>;
-	mmc-pwrseq = <&usdhc2_pwrseq>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	fsl,tuning-step = <2>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
-
-	pinctrl_hog_1: hoggrp-1 {
-		fsl,pins = <
-			MX7D_PAD_SD3_RESET_B__GPIO6_IO11	0x5d
-			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x7d
-			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x7d
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
-			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
-			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x3
-			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x71
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71
-			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x71
-			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x71
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x71
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x11
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x11
-			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x11
-			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x71
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x11
-			MX7D_PAD_SD3_STROBE__GPIO6_IO10			0x75
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x7d
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x7d
-			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x7d
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
-			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
-			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c2_rv4162: i2c2-rv4162grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x7d
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
-			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c3_tsc2004: i2c3tsc2004grp {
-		fsl,pins = <
-			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x79
-			MX7D_PAD_SD2_WP__GPIO5_IO10		0x7d
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
-			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_j2: j2grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15	0x7d
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x7d
-			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x7d
-			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x7d
-			MX7D_PAD_SD1_WP__GPIO5_IO1		0x7d
-			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x7d
-			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x7d
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x7d
-			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x7d
-			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x7d
-			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x7d
-			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x7d
-			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x7d
-			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x7d
-			MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14	0x7d
-			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x7d
-			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x7d
-			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x7d
-			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x7d
-			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x7d
-			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x7d
-			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x7d
-			MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22	0x7d
-			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x7d
-			MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20	0x7d
-			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x7d
-			MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19	0x7d
-			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x7d
-			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x7d
-			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x7d
-			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x7d
-			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x7d
-			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x7d
-			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x7d
-			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x7d
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
-			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
-			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
-			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
-			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
-			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
-			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
-			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
-			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
-			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
-			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
-			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
-			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
-			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
-			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
-			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
-			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
-			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
-			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
-			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
-			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
-			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
-			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
-			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
-			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
-			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
-			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x7d
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
-			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
-			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
-			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x7d
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
-			MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
-			MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
-			MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
-		>;
-	};
-
-	pinctrl_usbotg2: usbotg2grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x7d
-			MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
-			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x75
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x75
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
-			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
-			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
-			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
-			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
-			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
-			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x59
-			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x59
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_2>;
-
-	pinctrl_hog_2: hoggrp-2 {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x7d
-			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
-		>;
-	};
-
-	pinctrl_backlight_j9: backlightj9grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x7d
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x7d
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x7d
-			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x14
-		>;
-	};
-
-	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x75
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/imx7d-pico-dwarf.dts
deleted file mode 100644
index fdc10563f1473..0000000000000
--- a/arch/arm/boot/dts/imx7d-pico-dwarf.dts
+++ /dev/null
@@ -1,87 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright 2015 Technexion Ltd.
-//
-// Author: Wig Cheng  <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-/dts-v1/;
-
-#include "imx7d-pico.dtsi"
-/ {
-	model = "TechNexion PICO-IMX7D and DWARF baseboard";
-	compatible = "technexion,imx7d-pico-dwarf", "fsl,imx7d";
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx7d-sgtl5000";
-		audio-cpu = <&sai1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-	};
-
-	sys_mclk: clock-sys-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	sgtl5000: audio-codec@a {
-		reg = <0x0a>;
-		compatible = "fsl,sgtl5000";
-		clocks = <&sys_mclk>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	pressure-sensor@60 {
-		compatible = "fsl,mpl3115";
-		reg = <0x60>;
-	};
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pca9554: io-expander@25 {
-		compatible = "nxp,pca9554";
-		gpio-controller;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		reg = <0x25>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreen>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&pca9554 4 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-	};
-};
-
-&iomuxc {
-	pinctrl_touchscreen: touchscreengrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
deleted file mode 100644
index 6ad39dca70096..0000000000000
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-//
-// Copyright 2017 NXP
-
-#include "imx7d-pico.dtsi"
-
-/ {
-	model = "TechNexion PICO-IMX7D Board using Hobbit baseboard";
-	compatible = "technexion,imx7d-pico-hobbit", "fsl,imx7d";
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led {
-			label = "gpio-led";
-			gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "imx7-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,cpu {
-			sound-dai = <&sai1>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		};
-	};
-};
-
-&i2c1 {
-	sgtl5000: codec@a {
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_vref_1v8>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	adc081c: adc@50 {
-		compatible = "ti,adc081c";
-		reg = <0x50>;
-		vref-supply = <&reg_3p3v>;
-	};
-};
-
-&ecspi3 {
-	ads7846@0 {
-		reg = <0>;
-		compatible = "ti,ads7846";
-		interrupt-parent = <&gpio2>;
-		interrupts = <7 0>;
-		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&reg_3p3v>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <4095>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <4095>;
-		ti,pressure-max = /bits/ 16 <1024>;
-		ti,x-plate-ohms = /bits/ 16 <90>;
-		ti,y-plate-ohms = /bits/ 16 <90>;
-		ti,debounce-max = /bits/ 16 <70>;
-		ti,debounce-tol = /bits/ 16 <3>;
-		ti,debounce-rep = /bits/ 16 <2>;
-		ti,settle-delay-usec = /bits/ 16 <150>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14
-			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14
-			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14
-			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14
-			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14
-			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14
-			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-pico-nymph.dts b/arch/arm/boot/dts/imx7d-pico-nymph.dts
deleted file mode 100644
index 5afb1674e0125..0000000000000
--- a/arch/arm/boot/dts/imx7d-pico-nymph.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright 2015 Technexion Ltd.
-//
-// Author: Wig Cheng  <wig.cheng@technexion.com>
-//	   Richard Hu <richard.hu@technexion.com>
-//	   Tapani Utriainen <tapani@technexion.com>
-/dts-v1/;
-
-#include "imx7d-pico.dtsi"
-/ {
-	model = "TechNexion PICO-IMX7 and NYMPH baseboard";
-	compatible = "technexion,imx7d-pico-nymph", "fsl,imx7d";
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led {
-			label = "gpio-led";
-			gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx7d-sgtl5000";
-		audio-cpu = <&sai1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-	};
-
-	sys_mclk: clock-sys-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	sgtl5000: audio-codec@a {
-		reg = <0x0a>;
-		compatible = "fsl,sgtl5000";
-		clocks = <&sys_mclk>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	adc@52 {
-		compatible = "ti,adc081c";
-		reg = <0x52>;
-		vref-supply = <&reg_2p5v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	rtc@68 {
-		compatible = "dallas,ds1337";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts
deleted file mode 100644
index f263e391e24cb..0000000000000
--- a/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-//
-// Copyright 2017 NXP
-
-#include "imx7d-pico.dtsi"
-
-/ {
-	model = "TechNexion PICO-IMX7D Board and PI baseboard";
-	compatible = "technexion,imx7d-pico-pi", "fsl,imx7d";
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led {
-			label = "gpio-led";
-			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "imx7-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,cpu {
-			sound-dai = <&sai1>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		};
-	};
-};
-
-&i2c1 {
-	sgtl5000: codec@a {
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_vref_1v8>;
-	};
-};
-
-&i2c4 {
-	polytouch: touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreen>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14
-			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14
-			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14
-			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14
-			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14
-			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14
-			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14
-		>;
-	};
-
-	pinctrl_touchscreen: touchscreengrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14
-			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
-		>;
-	};
-
-};
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
deleted file mode 100644
index e0bff39e8d3e1..0000000000000
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ /dev/null
@@ -1,675 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-//
-// Copyright 2017 NXP
-
-/dts-v1/;
-
-#include "imx7d.dtsi"
-
-/ {
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 50000 0>;
-		brightness-levels = <0 36 72 108 144 180 216 255>;
-		default-brightness-level = <6>;
-	};
-
-	/* Will be filled by the bootloader */
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0>;
-	};
-
-	panel {
-		compatible = "vxt,vl050-8048nt-c01";
-		backlight = <&backlight>;
-		power-supply = <&reg_lcd_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_lcdreg_on>;
-		regulator-name = "lcd-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_wlreg_on: regulator-wlreg_on {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_wlreg_on>;
-		regulator-name = "wlreg_on";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg1_pwr>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_vref_1v8: regulator-vref-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	usdhc2_pwrseq: usdhc2_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
-		clock-names = "ext_clock";
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
-			  <&clks IMX7D_CLKO2_ROOT_DIV>;
-	assigned-clock-parents = <&clks IMX7D_CKIL>;
-	assigned-clock-rates = <0>, <32768>;
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-			status = "okay";
-		};
-	};
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	pmic: pfuze3000@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
-			  <&clks IMX7D_SAI1_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <24576000>;
-	status = "okay";
-};
-
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 { /* Backlight */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart7 { /* Bluetooth */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart7>;
-	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	fsl,tuning-step = <2>;
-	vmmc-supply = <&reg_3p3v>;
-	wakeup-source;
-	no-1-8-v;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc2 { /* Wifi SDIO */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi_clk>;
-	no-1-8-v;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_wlreg_on>;
-	mmc-pwrseq = <&usdhc2_pwrseq>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	no-1-8-v;
-	fsl,tuning-step = <2>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2
-			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2
-			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2
-			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__I2C1_SDA	0x4000007f
-			MX7D_PAD_UART1_RX_DATA__I2C1_SCL	0x4000007f
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_UART2_TX_DATA__I2C2_SDA	0x4000007f
-			MX7D_PAD_UART2_RX_DATA__I2C2_SCL	0x4000007f
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
-			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
-			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
-			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
-			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
-			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
-			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
-			MX7D_PAD_SD3_RESET_B__GPIO6_IO11		0x1  /* Ethernet reset */
-		>;
-	};
-
-	pinctrl_can1: can1frp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX	0x59
-			MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX	0x59
-		>;
-	};
-
-	pinctrl_can2: can2frp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX	0x59
-			MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX	0x59
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
-			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_lcdif: lcdifgrp {
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
-			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
-			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
-			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
-			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
-			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
-			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
-			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
-			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
-			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
-			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
-			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
-			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
-			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
-			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
-			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
-			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
-			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
-			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
-			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
-			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
-			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
-			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
-			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
-			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
-			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x78
-			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x78
-			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x78
-			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14
-		>;
-	};
-
-	pinctrl_pwm1: pwm1 {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO08__PWM1_OUT	0x7f
-		>;
-	};
-
-	pinctrl_pwm2: pwm2 {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__PWM2_OUT	0x7f
-		>;
-	};
-
-	pinctrl_pwm3: pwm3 {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__PWM3_OUT	0x7f
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp{
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO11__PWM4_OUT	0x7f
-		>;
-	};
-
-	pinctrl_reg_wlreg_on: regregongrp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x59
-		>;
-	};
-
-	pinctrl_sai1: sai1grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK	0x1f
-			MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
-			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
-			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x79
-			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x79
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x79
-			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x79
-			MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x79
-			MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x79
-		>;
-	};
-
-	pinctrl_uart7: uart7grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX	0x79
-			MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX	0x79
-			MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS	0x79
-			MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS	0x79
-		>;
-	};
-
-	pinctrl_usbotg1_pwr: usbotg_pwr {
-		fsl,pins = <
-			MX7D_PAD_UART3_TX_DATA__GPIO4_IO5	0x14
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x15
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x15
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x15
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
-			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
-			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
-			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
-			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
-			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_wifi_clk: wificlkgrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
-		>;
-	};
-
-	pinctrl_reg_lcdreg_on: reglcdongrp {
-	fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x59
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h
deleted file mode 100644
index 69f2c1ec8254d..0000000000000
--- a/arch/arm/boot/dts/imx7d-pinfunc.h
+++ /dev/null
@@ -1,1154 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DTS_IMX7D_PINFUNC_H
-#define __DTS_IMX7D_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-
-#define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0                       0x0000 0x0030 0x0000 0x0 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT                        0x0000 0x0030 0x0000 0x1 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_ANY                  0x0000 0x0030 0x0000 0x2 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B                    0x0000 0x0030 0x0000 0x3 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG__RST_B_DEB           0x0000 0x0030 0x0000 0x4 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1                       0x0004 0x0034 0x0000 0x0 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT                        0x0004 0x0034 0x0000 0x1 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3               0x0004 0x0034 0x0000 0x2 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO01__SAI1_MCLK                       0x0004 0x0034 0x0000 0x3 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO01__ANATOP_24M_OUT                  0x0004 0x0034 0x0000 0x4 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO01__OBSERVE0_OUT                    0x0004 0x0034 0x0000 0x6 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2                       0x0008 0x0038 0x0000 0x0 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO02__PWM2_OUT                        0x0008 0x0038 0x0000 0x1 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_ENET_REF_CLK1               0x0008 0x0038 0x0564 0x2 0x3
-#define MX7D_PAD_LPSR_GPIO1_IO02__SAI2_MCLK                       0x0008 0x0038 0x0000 0x3 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_CLKO1                       0x0008 0x0038 0x0000 0x5 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO02__OBSERVE1_OUT                    0x0008 0x0038 0x0000 0x6 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO02__USB_OTG1_ID                     0x0008 0x0038 0x0734 0x7 0x3
-#define MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3                       0x000C 0x003C 0x0000 0x0 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO03__PWM3_OUT                        0x000C 0x003C 0x0000 0x1 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_ENET_REF_CLK2               0x000C 0x003C 0x0570 0x2 0x3
-#define MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK                       0x000C 0x003C 0x0000 0x3 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2                       0x000C 0x003C 0x0000 0x5 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO03__OBSERVE2_OUT                    0x000C 0x003C 0x0000 0x6 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO03__USB_OTG2_ID                     0x000C 0x003C 0x0730 0x7 0x3
-#define MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4                       0x0010 0x0040 0x0000 0x0 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC                     0x0010 0x0040 0x072C 0x1 0x1
-#define MX7D_PAD_LPSR_GPIO1_IO04__FLEXTIMER1_CH4                  0x0010 0x0040 0x0594 0x2 0x1
-#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DCE_CTS                   0x0010 0x0040 0x0000 0x3 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DTE_RTS                   0x0010 0x0040 0x0710 0x3 0x4
-#define MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL                        0x0010 0x0040 0x05D4 0x4 0x2
-#define MX7D_PAD_LPSR_GPIO1_IO04__OBSERVE3_OUT                    0x0010 0x0040 0x0000 0x6 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5                       0x0014 0x0044 0x0000 0x0 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR                    0x0014 0x0044 0x0000 0x1 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO05__FLEXTIMER1_CH5                  0x0014 0x0044 0x0598 0x2 0x1
-#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DCE_RTS                   0x0014 0x0044 0x0710 0x3 0x5
-#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DTE_CTS                   0x0014 0x0044 0x0000 0x3 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA                        0x0014 0x0044 0x05D8 0x4 0x2
-#define MX7D_PAD_LPSR_GPIO1_IO05__OBSERVE4_OUT                    0x0014 0x0044 0x0000 0x6 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6                       0x0018 0x0048 0x0000 0x0 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC                     0x0018 0x0048 0x0728 0x1 0x1
-#define MX7D_PAD_LPSR_GPIO1_IO06__FLEXTIMER1_CH6                  0x0018 0x0048 0x059C 0x2 0x1
-#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DCE_RX                    0x0018 0x0048 0x0714 0x3 0x4
-#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DTE_TX                    0x0018 0x0048 0x0000 0x3 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO06__I2C2_SCL                        0x0018 0x0048 0x05DC 0x4 0x2
-#define MX7D_PAD_LPSR_GPIO1_IO06__CCM_WAIT                        0x0018 0x0048 0x0000 0x5 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO06__KPP_ROW4                        0x0018 0x0048 0x0624 0x6 0x1
-#define MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7                       0x001C 0x004C 0x0000 0x0 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO07__USB_OTG2_PWR                    0x001C 0x004C 0x0000 0x1 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO07__FLEXTIMER1_CH7                  0x001C 0x004C 0x05A0 0x2 0x1
-#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DCE_TX                    0x001C 0x004C 0x0000 0x3 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DTE_RX                    0x001C 0x004C 0x0714 0x3 0x5
-#define MX7D_PAD_LPSR_GPIO1_IO07__I2C2_SDA                        0x001C 0x004C 0x05E0 0x4 0x2
-#define MX7D_PAD_LPSR_GPIO1_IO07__CCM_STOP                        0x001C 0x004C 0x0000 0x5 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO07__KPP_COL4                        0x001C 0x004C 0x0604 0x6 0x1
-#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8                            0x0014 0x026C 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT                          0x0014 0x026C 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B                         0x0014 0x026C 0x0000 0x2 0x0
-#define MX7D_PAD_GPIO1_IO08__UART3_DCE_RX                         0x0014 0x026C 0x0704 0x3 0x0
-#define MX7D_PAD_GPIO1_IO08__UART3_DTE_TX                         0x0014 0x026C 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO08__I2C3_SCL                             0x0014 0x026C 0x05E4 0x4 0x0
-#define MX7D_PAD_GPIO1_IO08__KPP_COL5                             0x0014 0x026C 0x0608 0x6 0x0
-#define MX7D_PAD_GPIO1_IO08__PWM1_OUT                             0x0014 0x026C 0x0000 0x7 0x0
-#define MX7D_PAD_GPIO1_IO09__GPIO1_IO9                            0x0018 0x0270 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO09__SD1_LCTL                             0x0018 0x0270 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO09__CCM_ENET_REF_CLK3                    0x0018 0x0270 0x0000 0x2 0x0
-#define MX7D_PAD_GPIO1_IO09__UART3_DCE_TX                         0x0018 0x0270 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO09__UART3_DTE_RX                         0x0018 0x0270 0x0704 0x3 0x1
-#define MX7D_PAD_GPIO1_IO09__I2C3_SDA                             0x0018 0x0270 0x05E8 0x4 0x0
-#define MX7D_PAD_GPIO1_IO09__CCM_PMIC_READY                       0x0018 0x0270 0x04F4 0x5 0x0
-#define MX7D_PAD_GPIO1_IO09__KPP_ROW5                             0x0018 0x0270 0x0628 0x6 0x0
-#define MX7D_PAD_GPIO1_IO09__PWM2_OUT                             0x0018 0x0270 0x0000 0x7 0x0
-#define MX7D_PAD_GPIO1_IO10__GPIO1_IO10                           0x001C 0x0274 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO10__SD2_LCTL                             0x001C 0x0274 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO10__ENET1_MDIO                           0x001C 0x0274 0x0568 0x2 0x0
-#define MX7D_PAD_GPIO1_IO10__UART3_DCE_RTS                        0x001C 0x0274 0x0700 0x3 0x0
-#define MX7D_PAD_GPIO1_IO10__UART3_DTE_CTS                        0x001C 0x0274 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO10__I2C4_SCL                             0x001C 0x0274 0x05EC 0x4 0x0
-#define MX7D_PAD_GPIO1_IO10__FLEXTIMER1_PHA                       0x001C 0x0274 0x05A4 0x5 0x0
-#define MX7D_PAD_GPIO1_IO10__KPP_COL6                             0x001C 0x0274 0x060C 0x6 0x0
-#define MX7D_PAD_GPIO1_IO10__PWM3_OUT                             0x001C 0x0274 0x0000 0x7 0x0
-#define MX7D_PAD_GPIO1_IO11__GPIO1_IO11                           0x0020 0x0278 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO11__SD3_LCTL                             0x0020 0x0278 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO11__ENET1_MDC                            0x0020 0x0278 0x0000 0x2 0x0
-#define MX7D_PAD_GPIO1_IO11__UART3_DCE_CTS                        0x0020 0x0278 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO11__UART3_DTE_RTS                        0x0020 0x0278 0x0700 0x3 0x1
-#define MX7D_PAD_GPIO1_IO11__I2C4_SDA                             0x0020 0x0278 0x05F0 0x4 0x0
-#define MX7D_PAD_GPIO1_IO11__FLEXTIMER1_PHB                       0x0020 0x0278 0x05A8 0x5 0x0
-#define MX7D_PAD_GPIO1_IO11__KPP_ROW6                             0x0020 0x0278 0x062C 0x6 0x0
-#define MX7D_PAD_GPIO1_IO11__PWM4_OUT                             0x0020 0x0278 0x0000 0x7 0x0
-#define MX7D_PAD_GPIO1_IO12__GPIO1_IO12                           0x0024 0x027C 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO12__SD2_VSELECT                          0x0024 0x027C 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1                    0x0024 0x027C 0x0564 0x2 0x0
-#define MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX                          0x0024 0x027C 0x04DC 0x3 0x0
-#define MX7D_PAD_GPIO1_IO12__CM4_NMI                              0x0024 0x027C 0x0000 0x4 0x0
-#define MX7D_PAD_GPIO1_IO12__CCM_EXT_CLK1                         0x0024 0x027C 0x04E4 0x5 0x0
-#define MX7D_PAD_GPIO1_IO12__SNVS_VIO_5                           0x0024 0x027C 0x0000 0x6 0x0
-#define MX7D_PAD_GPIO1_IO12__USB_OTG1_ID                          0x0024 0x027C 0x0734 0x7 0x0
-#define MX7D_PAD_GPIO1_IO13__GPIO1_IO13                           0x0028 0x0280 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO13__SD3_VSELECT                          0x0028 0x0280 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO13__CCM_ENET_REF_CLK2                    0x0028 0x0280 0x0570 0x2 0x0
-#define MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX                          0x0028 0x0280 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO13__CCM_PMIC_READY                       0x0028 0x0280 0x04F4 0x4 0x1
-#define MX7D_PAD_GPIO1_IO13__CCM_EXT_CLK2                         0x0028 0x0280 0x04E8 0x5 0x0
-#define MX7D_PAD_GPIO1_IO13__SNVS_VIO_5_CTL                       0x0028 0x0280 0x0000 0x6 0x0
-#define MX7D_PAD_GPIO1_IO13__USB_OTG2_ID                          0x0028 0x0280 0x0730 0x7 0x0
-#define MX7D_PAD_GPIO1_IO14__GPIO1_IO14                           0x002C 0x0284 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO14__SD3_CD_B                             0x002C 0x0284 0x0738 0x1 0x0
-#define MX7D_PAD_GPIO1_IO14__ENET2_MDIO                           0x002C 0x0284 0x0574 0x2 0x0
-#define MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX                          0x002C 0x0284 0x04E0 0x3 0x0
-#define MX7D_PAD_GPIO1_IO14__WDOG3_WDOG_B                         0x002C 0x0284 0x0000 0x4 0x0
-#define MX7D_PAD_GPIO1_IO14__CCM_EXT_CLK3                         0x002C 0x0284 0x04EC 0x5 0x0
-#define MX7D_PAD_GPIO1_IO14__SDMA_EXT_EVENT0                      0x002C 0x0284 0x06D8 0x6 0x0
-#define MX7D_PAD_GPIO1_IO15__GPIO1_IO15                           0x0030 0x0288 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO15__SD3_WP                               0x0030 0x0288 0x073C 0x1 0x0
-#define MX7D_PAD_GPIO1_IO15__ENET2_MDC                            0x0030 0x0288 0x0000 0x2 0x0
-#define MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX                          0x0030 0x0288 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO15__WDOG4_WDOG_B                         0x0030 0x0288 0x0000 0x4 0x0
-#define MX7D_PAD_GPIO1_IO15__CCM_EXT_CLK4                         0x0030 0x0288 0x04F0 0x5 0x0
-#define MX7D_PAD_GPIO1_IO15__SDMA_EXT_EVENT1                      0x0030 0x0288 0x06DC 0x6 0x0
-#define MX7D_PAD_EPDC_DATA00__EPDC_DATA0                          0x0034 0x02A4 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD                     0x0034 0x02A4 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0                        0x0034 0x02A4 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA00__KPP_ROW3                            0x0034 0x02A4 0x0620 0x3 0x0
-#define MX7D_PAD_EPDC_DATA00__EIM_AD0                             0x0034 0x02A4 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA00__GPIO2_IO0                           0x0034 0x02A4 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA00__LCD_DATA0                           0x0034 0x02A4 0x0638 0x6 0x0
-#define MX7D_PAD_EPDC_DATA00__LCD_CLK                             0x0034 0x02A4 0x0000 0x7 0x0
-#define MX7D_PAD_EPDC_DATA01__EPDC_DATA1                          0x0038 0x02A8 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA01__SIM1_PORT2_CLK                      0x0038 0x02A8 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1                        0x0038 0x02A8 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA01__KPP_COL3                            0x0038 0x02A8 0x0600 0x3 0x0
-#define MX7D_PAD_EPDC_DATA01__EIM_AD1                             0x0038 0x02A8 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA01__GPIO2_IO1                           0x0038 0x02A8 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA01__LCD_DATA1                           0x0038 0x02A8 0x063C 0x6 0x0
-#define MX7D_PAD_EPDC_DATA01__LCD_ENABLE                          0x0038 0x02A8 0x0000 0x7 0x0
-#define MX7D_PAD_EPDC_DATA02__EPDC_DATA2                          0x003C 0x02AC 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA02__SIM1_PORT2_RST_B                    0x003C 0x02AC 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2                        0x003C 0x02AC 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA02__KPP_ROW2                            0x003C 0x02AC 0x061C 0x3 0x0
-#define MX7D_PAD_EPDC_DATA02__EIM_AD2                             0x003C 0x02AC 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA02__GPIO2_IO2                           0x003C 0x02AC 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA02__LCD_DATA2                           0x003C 0x02AC 0x0640 0x6 0x0
-#define MX7D_PAD_EPDC_DATA02__LCD_VSYNC                           0x003C 0x02AC 0x0698 0x7 0x0
-#define MX7D_PAD_EPDC_DATA03__EPDC_DATA3                          0x0040 0x02B0 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA03__SIM1_PORT2_SVEN                     0x0040 0x02B0 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3                        0x0040 0x02B0 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA03__KPP_COL2                            0x0040 0x02B0 0x05FC 0x3 0x0
-#define MX7D_PAD_EPDC_DATA03__EIM_AD3                             0x0040 0x02B0 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA03__GPIO2_IO3                           0x0040 0x02B0 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA03__LCD_DATA3                           0x0040 0x02B0 0x0644 0x6 0x0
-#define MX7D_PAD_EPDC_DATA03__LCD_HSYNC                           0x0040 0x02B0 0x0000 0x7 0x0
-#define MX7D_PAD_EPDC_DATA04__EPDC_DATA4                          0x0044 0x02B4 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA04__SIM1_PORT2_PD                       0x0044 0x02B4 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_DATA04__QSPI_A_DQS                          0x0044 0x02B4 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA04__KPP_ROW1                            0x0044 0x02B4 0x0618 0x3 0x0
-#define MX7D_PAD_EPDC_DATA04__EIM_AD4                             0x0044 0x02B4 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA04__GPIO2_IO4                           0x0044 0x02B4 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA04__LCD_DATA4                           0x0044 0x02B4 0x0648 0x6 0x0
-#define MX7D_PAD_EPDC_DATA04__JTAG_FAIL                           0x0044 0x02B4 0x0000 0x7 0x0
-#define MX7D_PAD_EPDC_DATA05__EPDC_DATA5                          0x0048 0x02B8 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA05__SIM2_PORT2_TRXD                     0x0048 0x02B8 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK                         0x0048 0x02B8 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA05__KPP_COL1                            0x0048 0x02B8 0x05F8 0x3 0x0
-#define MX7D_PAD_EPDC_DATA05__EIM_AD5                             0x0048 0x02B8 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA05__GPIO2_IO5                           0x0048 0x02B8 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA05__LCD_DATA5                           0x0048 0x02B8 0x064C 0x6 0x0
-#define MX7D_PAD_EPDC_DATA05__JTAG_ACTIVE                         0x0048 0x02B8 0x0000 0x7 0x0
-#define MX7D_PAD_EPDC_DATA06__EPDC_DATA6                          0x004C 0x02BC 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA06__SIM2_PORT2_CLK                      0x004C 0x02BC 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B                        0x004C 0x02BC 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA06__KPP_ROW0                            0x004C 0x02BC 0x0614 0x3 0x0
-#define MX7D_PAD_EPDC_DATA06__EIM_AD6                             0x004C 0x02BC 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA06__GPIO2_IO6                           0x004C 0x02BC 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA06__LCD_DATA6                           0x004C 0x02BC 0x0650 0x6 0x0
-#define MX7D_PAD_EPDC_DATA06__JTAG_DE_B                           0x004C 0x02BC 0x0000 0x7 0x0
-#define MX7D_PAD_EPDC_DATA07__EPDC_DATA7                          0x0050 0x02C0 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA07__SIM2_PORT2_RST_B                    0x0050 0x02C0 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B                        0x0050 0x02C0 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA07__KPP_COL0                            0x0050 0x02C0 0x05F4 0x3 0x0
-#define MX7D_PAD_EPDC_DATA07__EIM_AD7                             0x0050 0x02C0 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA07__GPIO2_IO7                           0x0050 0x02C0 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA07__LCD_DATA7                           0x0050 0x02C0 0x0654 0x6 0x0
-#define MX7D_PAD_EPDC_DATA07__JTAG_DONE                           0x0050 0x02C0 0x0000 0x7 0x0
-#define MX7D_PAD_EPDC_DATA08__EPDC_DATA8                          0x0054 0x02C4 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA08__SIM1_PORT1_TRXD                     0x0054 0x02C4 0x06E4 0x1 0x0
-#define MX7D_PAD_EPDC_DATA08__QSPI_B_DATA0                        0x0054 0x02C4 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA08__UART6_DCE_RX                        0x0054 0x02C4 0x071C 0x3 0x0
-#define MX7D_PAD_EPDC_DATA08__UART6_DTE_TX                        0x0054 0x02C4 0x0000 0x3 0x0
-#define MX7D_PAD_EPDC_DATA08__EIM_OE                              0x0054 0x02C4 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA08__GPIO2_IO8                           0x0054 0x02C4 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA08__LCD_DATA8                           0x0054 0x02C4 0x0658 0x6 0x0
-#define MX7D_PAD_EPDC_DATA08__LCD_BUSY                            0x0054 0x02C4 0x0634 0x7 0x0
-#define MX7D_PAD_EPDC_DATA08__EPDC_SDCLK                          0x0054 0x02C4 0x0000 0x8 0x0
-#define MX7D_PAD_EPDC_DATA09__EPDC_DATA9                          0x0058 0x02C8 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA09__SIM1_PORT1_CLK                      0x0058 0x02C8 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_DATA09__QSPI_B_DATA1                        0x0058 0x02C8 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA09__UART6_DCE_TX                        0x0058 0x02C8 0x0000 0x3 0x0
-#define MX7D_PAD_EPDC_DATA09__UART6_DTE_RX                        0x0058 0x02C8 0x071C 0x3 0x1
-#define MX7D_PAD_EPDC_DATA09__EIM_RW                              0x0058 0x02C8 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA09__GPIO2_IO9                           0x0058 0x02C8 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA09__LCD_DATA9                           0x0058 0x02C8 0x065C 0x6 0x0
-#define MX7D_PAD_EPDC_DATA09__LCD_DATA0                           0x0058 0x02C8 0x0638 0x7 0x1
-#define MX7D_PAD_EPDC_DATA09__EPDC_SDLE                           0x0058 0x02C8 0x0000 0x8 0x0
-#define MX7D_PAD_EPDC_DATA10__EPDC_DATA10                         0x005C 0x02CC 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA10__SIM1_PORT1_RST_B                    0x005C 0x02CC 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_DATA10__QSPI_B_DATA2                        0x005C 0x02CC 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS                       0x005C 0x02CC 0x0718 0x3 0x0
-#define MX7D_PAD_EPDC_DATA10__UART6_DTE_CTS                       0x005C 0x02CC 0x0000 0x3 0x0
-#define MX7D_PAD_EPDC_DATA10__EIM_CS0_B                           0x005C 0x02CC 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA10__GPIO2_IO10                          0x005C 0x02CC 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA10__LCD_DATA10                          0x005C 0x02CC 0x0660 0x6 0x0
-#define MX7D_PAD_EPDC_DATA10__LCD_DATA9                           0x005C 0x02CC 0x065C 0x7 0x1
-#define MX7D_PAD_EPDC_DATA10__EPDC_SDOE                           0x005C 0x02CC 0x0000 0x8 0x0
-#define MX7D_PAD_EPDC_DATA11__EPDC_DATA11                         0x0060 0x02D0 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA11__SIM1_PORT1_SVEN                     0x0060 0x02D0 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_DATA11__QSPI_B_DATA3                        0x0060 0x02D0 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS                       0x0060 0x02D0 0x0000 0x3 0x0
-#define MX7D_PAD_EPDC_DATA11__UART6_DTE_RTS                       0x0060 0x02D0 0x0718 0x3 0x1
-#define MX7D_PAD_EPDC_DATA11__EIM_BCLK                            0x0060 0x02D0 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA11__GPIO2_IO11                          0x0060 0x02D0 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA11__LCD_DATA11                          0x0060 0x02D0 0x0664 0x6 0x0
-#define MX7D_PAD_EPDC_DATA11__LCD_DATA1                           0x0060 0x02D0 0x063C 0x7 0x1
-#define MX7D_PAD_EPDC_DATA11__EPDC_SDCE0                          0x0060 0x02D0 0x0000 0x8 0x0
-#define MX7D_PAD_EPDC_DATA12__EPDC_DATA12                         0x0064 0x02D4 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA12__SIM1_PORT1_PD                       0x0064 0x02D4 0x06E0 0x1 0x0
-#define MX7D_PAD_EPDC_DATA12__QSPI_B_DQS                          0x0064 0x02D4 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA12__UART7_DCE_RX                        0x0064 0x02D4 0x0724 0x3 0x0
-#define MX7D_PAD_EPDC_DATA12__UART7_DTE_TX                        0x0064 0x02D4 0x0000 0x3 0x0
-#define MX7D_PAD_EPDC_DATA12__EIM_LBA_B                           0x0064 0x02D4 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA12__GPIO2_IO12                          0x0064 0x02D4 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA12__LCD_DATA12                          0x0064 0x02D4 0x0668 0x6 0x0
-#define MX7D_PAD_EPDC_DATA12__LCD_DATA21                          0x0064 0x02D4 0x068C 0x7 0x0
-#define MX7D_PAD_EPDC_DATA12__EPDC_GDCLK                          0x0064 0x02D4 0x0000 0x8 0x0
-#define MX7D_PAD_EPDC_DATA13__EPDC_DATA13                         0x0068 0x02D8 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA13__SIM2_PORT1_TRXD                     0x0068 0x02D8 0x06EC 0x1 0x0
-#define MX7D_PAD_EPDC_DATA13__QSPI_B_SCLK                         0x0068 0x02D8 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA13__UART7_DCE_TX                        0x0068 0x02D8 0x0000 0x3 0x0
-#define MX7D_PAD_EPDC_DATA13__UART7_DTE_RX                        0x0068 0x02D8 0x0724 0x3 0x1
-#define MX7D_PAD_EPDC_DATA13__EIM_WAIT                            0x0068 0x02D8 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA13__GPIO2_IO13                          0x0068 0x02D8 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA13__LCD_DATA13                          0x0068 0x02D8 0x066C 0x6 0x0
-#define MX7D_PAD_EPDC_DATA13__LCD_CS                              0x0068 0x02D8 0x0000 0x7 0x0
-#define MX7D_PAD_EPDC_DATA13__EPDC_GDOE                           0x0068 0x02D8 0x0000 0x8 0x0
-#define MX7D_PAD_EPDC_DATA14__EPDC_DATA14                         0x006C 0x02DC 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA14__SIM2_PORT1_CLK                      0x006C 0x02DC 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_DATA14__QSPI_B_SS0_B                        0x006C 0x02DC 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS                       0x006C 0x02DC 0x0720 0x3 0x0
-#define MX7D_PAD_EPDC_DATA14__UART7_DTE_CTS                       0x006C 0x02DC 0x0000 0x3 0x0
-#define MX7D_PAD_EPDC_DATA14__EIM_EB_B0                           0x006C 0x02DC 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA14__GPIO2_IO14                          0x006C 0x02DC 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA14__LCD_DATA14                          0x006C 0x02DC 0x0670 0x6 0x0
-#define MX7D_PAD_EPDC_DATA14__LCD_DATA22                          0x006C 0x02DC 0x0690 0x7 0x0
-#define MX7D_PAD_EPDC_DATA14__EPDC_GDSP                           0x006C 0x02DC 0x0000 0x8 0x0
-#define MX7D_PAD_EPDC_DATA15__EPDC_DATA15                         0x0070 0x02E0 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_DATA15__SIM2_PORT1_RST_B                    0x0070 0x02E0 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_DATA15__QSPI_B_SS1_B                        0x0070 0x02E0 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS                       0x0070 0x02E0 0x0000 0x3 0x0
-#define MX7D_PAD_EPDC_DATA15__UART7_DTE_RTS                       0x0070 0x02E0 0x0720 0x3 0x1
-#define MX7D_PAD_EPDC_DATA15__EIM_CS1_B                           0x0070 0x02E0 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_DATA15__GPIO2_IO15                          0x0070 0x02E0 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_DATA15__LCD_DATA15                          0x0070 0x02E0 0x0674 0x6 0x0
-#define MX7D_PAD_EPDC_DATA15__LCD_WR_RWN                          0x0070 0x02E0 0x0000 0x7 0x0
-#define MX7D_PAD_EPDC_DATA15__EPDC_PWR_COM                        0x0070 0x02E0 0x0000 0x8 0x0
-#define MX7D_PAD_EPDC_SDCLK__EPDC_SDCLK                           0x0074 0x02E4 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_SDCLK__SIM2_PORT2_SVEN                      0x0074 0x02E4 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0                      0x0074 0x02E4 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_SDCLK__KPP_ROW4                             0x0074 0x02E4 0x0624 0x3 0x0
-#define MX7D_PAD_EPDC_SDCLK__EIM_AD10                             0x0074 0x02E4 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_SDCLK__GPIO2_IO16                           0x0074 0x02E4 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_SDCLK__LCD_CLK                              0x0074 0x02E4 0x0000 0x6 0x0
-#define MX7D_PAD_EPDC_SDCLK__LCD_DATA20                           0x0074 0x02E4 0x0688 0x7 0x0
-#define MX7D_PAD_EPDC_SDLE__EPDC_SDLE                             0x0078 0x02E8 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_SDLE__SIM2_PORT2_PD                         0x0078 0x02E8 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1                       0x0078 0x02E8 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_SDLE__KPP_COL4                              0x0078 0x02E8 0x0604 0x3 0x0
-#define MX7D_PAD_EPDC_SDLE__EIM_AD11                              0x0078 0x02E8 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_SDLE__GPIO2_IO17                            0x0078 0x02E8 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_SDLE__LCD_DATA16                            0x0078 0x02E8 0x0678 0x6 0x0
-#define MX7D_PAD_EPDC_SDLE__LCD_DATA8                             0x0078 0x02E8 0x0658 0x7 0x1
-#define MX7D_PAD_EPDC_SDOE__EPDC_SDOE                             0x007C 0x02EC 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_SDOE__FLEXTIMER1_CH0                        0x007C 0x02EC 0x0584 0x1 0x0
-#define MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2                       0x007C 0x02EC 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_SDOE__KPP_COL5                              0x007C 0x02EC 0x0608 0x3 0x1
-#define MX7D_PAD_EPDC_SDOE__EIM_AD12                              0x007C 0x02EC 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_SDOE__GPIO2_IO18                            0x007C 0x02EC 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_SDOE__LCD_DATA17                            0x007C 0x02EC 0x067C 0x6 0x0
-#define MX7D_PAD_EPDC_SDOE__LCD_DATA23                            0x007C 0x02EC 0x0694 0x7 0x0
-#define MX7D_PAD_EPDC_SDSHR__EPDC_SDSHR                           0x0080 0x02F0 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_SDSHR__FLEXTIMER1_CH1                       0x0080 0x02F0 0x0588 0x1 0x0
-#define MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3                      0x0080 0x02F0 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_SDSHR__KPP_ROW5                             0x0080 0x02F0 0x0628 0x3 0x1
-#define MX7D_PAD_EPDC_SDSHR__EIM_AD13                             0x0080 0x02F0 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_SDSHR__GPIO2_IO19                           0x0080 0x02F0 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_SDSHR__LCD_DATA18                           0x0080 0x02F0 0x0680 0x6 0x0
-#define MX7D_PAD_EPDC_SDSHR__LCD_DATA10                           0x0080 0x02F0 0x0660 0x7 0x1
-#define MX7D_PAD_EPDC_SDCE0__EPDC_SDCE0                           0x0084 0x02F4 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_SDCE0__FLEXTIMER1_CH2                       0x0084 0x02F4 0x058C 0x1 0x0
-#define MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL                   0x0084 0x02F4 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_SDCE0__EIM_AD14                             0x0084 0x02F4 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_SDCE0__GPIO2_IO20                           0x0084 0x02F4 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_SDCE0__LCD_DATA19                           0x0084 0x02F4 0x0684 0x6 0x0
-#define MX7D_PAD_EPDC_SDCE0__LCD_DATA5                            0x0084 0x02F4 0x064C 0x7 0x1
-#define MX7D_PAD_EPDC_SDCE1__EPDC_SDCE1                           0x0088 0x02F8 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_SDCE1__FLEXTIMER1_CH3                       0x0088 0x02F8 0x0590 0x1 0x0
-#define MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC                      0x0088 0x02F8 0x0578 0x2 0x0
-#define MX7D_PAD_EPDC_SDCE1__ENET2_RX_ER                          0x0088 0x02F8 0x0000 0x3 0x0
-#define MX7D_PAD_EPDC_SDCE1__EIM_AD15                             0x0088 0x02F8 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_SDCE1__GPIO2_IO21                           0x0088 0x02F8 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_SDCE1__LCD_DATA20                           0x0088 0x02F8 0x0688 0x6 0x1
-#define MX7D_PAD_EPDC_SDCE1__LCD_DATA4                            0x0088 0x02F8 0x0648 0x7 0x1
-#define MX7D_PAD_EPDC_SDCE2__EPDC_SDCE2                           0x008C 0x02FC 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_SDCE2__SIM2_PORT1_SVEN                      0x008C 0x02FC 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0                      0x008C 0x02FC 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_SDCE2__KPP_COL6                             0x008C 0x02FC 0x060C 0x3 0x1
-#define MX7D_PAD_EPDC_SDCE2__EIM_ADDR16                           0x008C 0x02FC 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_SDCE2__GPIO2_IO22                           0x008C 0x02FC 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_SDCE2__LCD_DATA21                           0x008C 0x02FC 0x068C 0x6 0x1
-#define MX7D_PAD_EPDC_SDCE2__LCD_DATA3                            0x008C 0x02FC 0x0644 0x7 0x1
-#define MX7D_PAD_EPDC_SDCE3__EPDC_SDCE3                           0x0090 0x0300 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_SDCE3__SIM2_PORT1_PD                        0x0090 0x0300 0x06E8 0x1 0x0
-#define MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1                      0x0090 0x0300 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_SDCE3__KPP_ROW6                             0x0090 0x0300 0x062C 0x3 0x1
-#define MX7D_PAD_EPDC_SDCE3__EIM_ADDR17                           0x0090 0x0300 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_SDCE3__GPIO2_IO23                           0x0090 0x0300 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_SDCE3__LCD_DATA22                           0x0090 0x0300 0x0690 0x6 0x1
-#define MX7D_PAD_EPDC_SDCE3__LCD_DATA2                            0x0090 0x0300 0x0640 0x7 0x1
-#define MX7D_PAD_EPDC_GDCLK__EPDC_GDCLK                           0x0094 0x0304 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_GDCLK__FLEXTIMER2_CH0                       0x0094 0x0304 0x05AC 0x1 0x0
-#define MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2                      0x0094 0x0304 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_GDCLK__KPP_COL7                             0x0094 0x0304 0x0610 0x3 0x0
-#define MX7D_PAD_EPDC_GDCLK__EIM_ADDR18                           0x0094 0x0304 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_GDCLK__GPIO2_IO24                           0x0094 0x0304 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_GDCLK__LCD_DATA23                           0x0094 0x0304 0x0694 0x6 0x1
-#define MX7D_PAD_EPDC_GDCLK__LCD_DATA16                           0x0094 0x0304 0x0678 0x7 0x1
-#define MX7D_PAD_EPDC_GDOE__EPDC_GDOE                             0x0098 0x0308 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_GDOE__FLEXTIMER2_CH1                        0x0098 0x0308 0x05B0 0x1 0x0
-#define MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3                       0x0098 0x0308 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_GDOE__KPP_ROW7                              0x0098 0x0308 0x0630 0x3 0x0
-#define MX7D_PAD_EPDC_GDOE__EIM_ADDR19                            0x0098 0x0308 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_GDOE__GPIO2_IO25                            0x0098 0x0308 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_GDOE__LCD_WR_RWN                            0x0098 0x0308 0x0000 0x6 0x0
-#define MX7D_PAD_EPDC_GDOE__LCD_DATA18                            0x0098 0x0308 0x0680 0x7 0x1
-#define MX7D_PAD_EPDC_GDRL__EPDC_GDRL                             0x009C 0x030C 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_GDRL__FLEXTIMER2_CH2                        0x009C 0x030C 0x05B4 0x1 0x0
-#define MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL                    0x009C 0x030C 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_GDRL__EIM_ADDR20                            0x009C 0x030C 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_GDRL__GPIO2_IO26                            0x009C 0x030C 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_GDRL__LCD_RD_E                              0x009C 0x030C 0x0000 0x6 0x0
-#define MX7D_PAD_EPDC_GDRL__LCD_DATA19                            0x009C 0x030C 0x0684 0x7 0x1
-#define MX7D_PAD_EPDC_GDSP__EPDC_GDSP                             0x00A0 0x0310 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_GDSP__FLEXTIMER2_CH3                        0x00A0 0x0310 0x05B8 0x1 0x0
-#define MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC                       0x00A0 0x0310 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_GDSP__ENET2_TX_ER                           0x00A0 0x0310 0x0000 0x3 0x0
-#define MX7D_PAD_EPDC_GDSP__EIM_ADDR21                            0x00A0 0x0310 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_GDSP__GPIO2_IO27                            0x00A0 0x0310 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_GDSP__LCD_BUSY                              0x00A0 0x0310 0x0634 0x6 0x1
-#define MX7D_PAD_EPDC_GDSP__LCD_DATA17                            0x00A0 0x0310 0x067C 0x7 0x1
-#define MX7D_PAD_EPDC_BDR0__EPDC_BDR0                             0x00A4 0x0314 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_BDR0__ENET2_TX_CLK                          0x00A4 0x0314 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_BDR0__CCM_ENET_REF_CLK2                     0x00A4 0x0314 0x0570 0x3 0x1
-#define MX7D_PAD_EPDC_BDR0__EIM_ADDR22                            0x00A4 0x0314 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_BDR0__GPIO2_IO28                            0x00A4 0x0314 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_BDR0__LCD_CS                                0x00A4 0x0314 0x0000 0x6 0x0
-#define MX7D_PAD_EPDC_BDR0__LCD_DATA7                             0x00A4 0x0314 0x0654 0x7 0x1
-#define MX7D_PAD_EPDC_BDR1__EPDC_BDR1                             0x00A8 0x0318 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_BDR1__EPDC_SDCLKN                           0x00A8 0x0318 0x0000 0x1 0x0
-#define MX7D_PAD_EPDC_BDR1__ENET2_RX_CLK                          0x00A8 0x0318 0x0578 0x2 0x1
-#define MX7D_PAD_EPDC_BDR1__EIM_AD8                               0x00A8 0x0318 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_BDR1__GPIO2_IO29                            0x00A8 0x0318 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_BDR1__LCD_ENABLE                            0x00A8 0x0318 0x0000 0x6 0x0
-#define MX7D_PAD_EPDC_BDR1__LCD_DATA6                             0x00A8 0x0318 0x0650 0x7 0x1
-#define MX7D_PAD_EPDC_PWR_COM__EPDC_PWR_COM                       0x00AC 0x031C 0x0000 0x0 0x0
-#define MX7D_PAD_EPDC_PWR_COM__FLEXTIMER2_PHA                     0x00AC 0x031C 0x05CC 0x1 0x0
-#define MX7D_PAD_EPDC_PWR_COM__ENET2_CRS                          0x00AC 0x031C 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_PWR_COM__EIM_AD9                            0x00AC 0x031C 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30                         0x00AC 0x031C 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_PWR_COM__LCD_HSYNC                          0x00AC 0x031C 0x0000 0x6 0x0
-#define MX7D_PAD_EPDC_PWR_COM__LCD_DATA11                         0x00AC 0x031C 0x0664 0x7 0x1
-#define MX7D_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                     0x00B0 0x0320 0x0580 0x0 0x0
-#define MX7D_PAD_EPDC_PWR_STAT__FLEXTIMER2_PHB                    0x00B0 0x0320 0x05D0 0x1 0x0
-#define MX7D_PAD_EPDC_PWR_STAT__ENET2_COL                         0x00B0 0x0320 0x0000 0x2 0x0
-#define MX7D_PAD_EPDC_PWR_STAT__EIM_EB_B1                         0x00B0 0x0320 0x0000 0x4 0x0
-#define MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31                        0x00B0 0x0320 0x0000 0x5 0x0
-#define MX7D_PAD_EPDC_PWR_STAT__LCD_VSYNC                         0x00B0 0x0320 0x0698 0x6 0x1
-#define MX7D_PAD_EPDC_PWR_STAT__LCD_DATA12                        0x00B0 0x0320 0x0668 0x7 0x1
-#define MX7D_PAD_LCD_CLK__LCD_CLK                                 0x00B4 0x0324 0x0000 0x0 0x0
-#define MX7D_PAD_LCD_CLK__ECSPI4_MISO                             0x00B4 0x0324 0x0558 0x1 0x0
-#define MX7D_PAD_LCD_CLK__ENET1_1588_EVENT2_IN                    0x00B4 0x0324 0x0000 0x2 0x0
-#define MX7D_PAD_LCD_CLK__CSI_DATA16                              0x00B4 0x0324 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_CLK__UART2_DCE_RX                            0x00B4 0x0324 0x06FC 0x4 0x0
-#define MX7D_PAD_LCD_CLK__UART2_DTE_TX                            0x00B4 0x0324 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_CLK__GPIO3_IO0                               0x00B4 0x0324 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_ENABLE__LCD_ENABLE                           0x00B8 0x0328 0x0000 0x0 0x0
-#define MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI                          0x00B8 0x0328 0x055C 0x1 0x0
-#define MX7D_PAD_LCD_ENABLE__ENET1_1588_EVENT3_IN                 0x00B8 0x0328 0x0000 0x2 0x0
-#define MX7D_PAD_LCD_ENABLE__CSI_DATA17                           0x00B8 0x0328 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_ENABLE__UART2_DCE_TX                         0x00B8 0x0328 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_ENABLE__UART2_DTE_RX                         0x00B8 0x0328 0x06FC 0x4 0x1
-#define MX7D_PAD_LCD_ENABLE__GPIO3_IO1                            0x00B8 0x0328 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_HSYNC__LCD_HSYNC                             0x00BC 0x032C 0x0000 0x0 0x0
-#define MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK                           0x00BC 0x032C 0x0554 0x1 0x0
-#define MX7D_PAD_LCD_HSYNC__ENET2_1588_EVENT2_IN                  0x00BC 0x032C 0x0000 0x2 0x0
-#define MX7D_PAD_LCD_HSYNC__CSI_DATA18                            0x00BC 0x032C 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_HSYNC__UART2_DCE_RTS                         0x00BC 0x032C 0x06F8 0x4 0x0
-#define MX7D_PAD_LCD_HSYNC__UART2_DTE_CTS                         0x00BC 0x032C 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_HSYNC__GPIO3_IO2                             0x00BC 0x032C 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_VSYNC__LCD_VSYNC                             0x00C0 0x0330 0x0698 0x0 0x2
-#define MX7D_PAD_LCD_VSYNC__ECSPI4_SS0                            0x00C0 0x0330 0x0560 0x1 0x0
-#define MX7D_PAD_LCD_VSYNC__ENET2_1588_EVENT3_IN                  0x00C0 0x0330 0x0000 0x2 0x0
-#define MX7D_PAD_LCD_VSYNC__CSI_DATA19                            0x00C0 0x0330 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_VSYNC__UART2_DCE_CTS                         0x00C0 0x0330 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_VSYNC__UART2_DTE_RTS                         0x00C0 0x0330 0x06F8 0x4 0x1
-#define MX7D_PAD_LCD_VSYNC__GPIO3_IO3                             0x00C0 0x0330 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_RESET__LCD_RESET                             0x00C4 0x0334 0x0000 0x0 0x0
-#define MX7D_PAD_LCD_RESET__GPT1_COMPARE1                         0x00C4 0x0334 0x0000 0x1 0x0
-#define MX7D_PAD_LCD_RESET__ARM_PLATFORM_EVENTI                   0x00C4 0x0334 0x0000 0x2 0x0
-#define MX7D_PAD_LCD_RESET__CSI_FIELD                             0x00C4 0x0334 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_RESET__EIM_DTACK_B                           0x00C4 0x0334 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_RESET__GPIO3_IO4                             0x00C4 0x0334 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA00__LCD_DATA0                            0x00C8 0x0338 0x0638 0x0 0x2
-#define MX7D_PAD_LCD_DATA00__GPT1_COMPARE2                        0x00C8 0x0338 0x0000 0x1 0x0
-#define MX7D_PAD_LCD_DATA00__CSI_DATA20                           0x00C8 0x0338 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_DATA00__EIM_DATA0                            0x00C8 0x0338 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA00__GPIO3_IO5                            0x00C8 0x0338 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA00__SRC_BOOT_CFG0                        0x00C8 0x0338 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA01__LCD_DATA1                            0x00CC 0x033C 0x063C 0x0 0x2
-#define MX7D_PAD_LCD_DATA01__GPT1_COMPARE3                        0x00CC 0x033C 0x0000 0x1 0x0
-#define MX7D_PAD_LCD_DATA01__CSI_DATA21                           0x00CC 0x033C 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_DATA01__EIM_DATA1                            0x00CC 0x033C 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA01__GPIO3_IO6                            0x00CC 0x033C 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA01__SRC_BOOT_CFG1                        0x00CC 0x033C 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA02__LCD_DATA2                            0x00D0 0x0340 0x0640 0x0 0x2
-#define MX7D_PAD_LCD_DATA02__GPT1_CLK                             0x00D0 0x0340 0x0000 0x1 0x0
-#define MX7D_PAD_LCD_DATA02__CSI_DATA22                           0x00D0 0x0340 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_DATA02__EIM_DATA2                            0x00D0 0x0340 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA02__GPIO3_IO7                            0x00D0 0x0340 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA02__SRC_BOOT_CFG2                        0x00D0 0x0340 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA03__LCD_DATA3                            0x00D4 0x0344 0x0644 0x0 0x2
-#define MX7D_PAD_LCD_DATA03__GPT1_CAPTURE1                        0x00D4 0x0344 0x0000 0x1 0x0
-#define MX7D_PAD_LCD_DATA03__CSI_DATA23                           0x00D4 0x0344 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_DATA03__EIM_DATA3                            0x00D4 0x0344 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA03__GPIO3_IO8                            0x00D4 0x0344 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA03__SRC_BOOT_CFG3                        0x00D4 0x0344 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA04__LCD_DATA4                            0x00D8 0x0348 0x0648 0x0 0x2
-#define MX7D_PAD_LCD_DATA04__GPT1_CAPTURE2                        0x00D8 0x0348 0x0000 0x1 0x0
-#define MX7D_PAD_LCD_DATA04__CSI_VSYNC                            0x00D8 0x0348 0x0520 0x3 0x0
-#define MX7D_PAD_LCD_DATA04__EIM_DATA4                            0x00D8 0x0348 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA04__GPIO3_IO9                            0x00D8 0x0348 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA04__SRC_BOOT_CFG4                        0x00D8 0x0348 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA05__LCD_DATA5                            0x00DC 0x034C 0x064C 0x0 0x2
-#define MX7D_PAD_LCD_DATA05__CSI_HSYNC                            0x00DC 0x034C 0x0518 0x3 0x0
-#define MX7D_PAD_LCD_DATA05__EIM_DATA5                            0x00DC 0x034C 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA05__GPIO3_IO10                           0x00DC 0x034C 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA05__SRC_BOOT_CFG5                        0x00DC 0x034C 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA06__LCD_DATA6                            0x00E0 0x0350 0x0650 0x0 0x2
-#define MX7D_PAD_LCD_DATA06__CSI_PIXCLK                           0x00E0 0x0350 0x051C 0x3 0x0
-#define MX7D_PAD_LCD_DATA06__EIM_DATA6                            0x00E0 0x0350 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA06__GPIO3_IO11                           0x00E0 0x0350 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA06__SRC_BOOT_CFG6                        0x00E0 0x0350 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA07__LCD_DATA7                            0x00E4 0x0354 0x0654 0x0 0x2
-#define MX7D_PAD_LCD_DATA07__CSI_MCLK                             0x00E4 0x0354 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_DATA07__EIM_DATA7                            0x00E4 0x0354 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA07__GPIO3_IO12                           0x00E4 0x0354 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA07__SRC_BOOT_CFG7                        0x00E4 0x0354 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA08__LCD_DATA8                            0x00E8 0x0358 0x0658 0x0 0x2
-#define MX7D_PAD_LCD_DATA08__CSI_DATA9                            0x00E8 0x0358 0x0514 0x3 0x0
-#define MX7D_PAD_LCD_DATA08__EIM_DATA8                            0x00E8 0x0358 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA08__GPIO3_IO13                           0x00E8 0x0358 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA08__SRC_BOOT_CFG8                        0x00E8 0x0358 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA09__LCD_DATA9                            0x00EC 0x035C 0x065C 0x0 0x2
-#define MX7D_PAD_LCD_DATA09__CSI_DATA8                            0x00EC 0x035C 0x0510 0x3 0x0
-#define MX7D_PAD_LCD_DATA09__EIM_DATA9                            0x00EC 0x035C 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA09__GPIO3_IO14                           0x00EC 0x035C 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA09__SRC_BOOT_CFG9                        0x00EC 0x035C 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA10__LCD_DATA10                           0x00F0 0x0360 0x0660 0x0 0x2
-#define MX7D_PAD_LCD_DATA10__CSI_DATA7                            0x00F0 0x0360 0x050C 0x3 0x0
-#define MX7D_PAD_LCD_DATA10__EIM_DATA10                           0x00F0 0x0360 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA10__GPIO3_IO15                           0x00F0 0x0360 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA10__SRC_BOOT_CFG10                       0x00F0 0x0360 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA11__LCD_DATA11                           0x00F4 0x0364 0x0664 0x0 0x2
-#define MX7D_PAD_LCD_DATA11__CSI_DATA6                            0x00F4 0x0364 0x0508 0x3 0x0
-#define MX7D_PAD_LCD_DATA11__EIM_DATA11                           0x00F4 0x0364 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA11__GPIO3_IO16                           0x00F4 0x0364 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA11__SRC_BOOT_CFG11                       0x00F4 0x0364 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA12__LCD_DATA12                           0x00F8 0x0368 0x0668 0x0 0x2
-#define MX7D_PAD_LCD_DATA12__CSI_DATA5                            0x00F8 0x0368 0x0504 0x3 0x0
-#define MX7D_PAD_LCD_DATA12__EIM_DATA12                           0x00F8 0x0368 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA12__GPIO3_IO17                           0x00F8 0x0368 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA12__SRC_BOOT_CFG12                       0x00F8 0x0368 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA13__LCD_DATA13                           0x00FC 0x036C 0x066C 0x0 0x1
-#define MX7D_PAD_LCD_DATA13__CSI_DATA4                            0x00FC 0x036C 0x0500 0x3 0x0
-#define MX7D_PAD_LCD_DATA13__EIM_DATA13                           0x00FC 0x036C 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA13__GPIO3_IO18                           0x00FC 0x036C 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA13__SRC_BOOT_CFG13                       0x00FC 0x036C 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA14__LCD_DATA14                           0x0100 0x0370 0x0670 0x0 0x1
-#define MX7D_PAD_LCD_DATA14__CSI_DATA3                            0x0100 0x0370 0x04FC 0x3 0x0
-#define MX7D_PAD_LCD_DATA14__EIM_DATA14                           0x0100 0x0370 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA14__GPIO3_IO19                           0x0100 0x0370 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA14__SRC_BOOT_CFG14                       0x0100 0x0370 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA15__LCD_DATA15                           0x0104 0x0374 0x0674 0x0 0x1
-#define MX7D_PAD_LCD_DATA15__CSI_DATA2                            0x0104 0x0374 0x04F8 0x3 0x0
-#define MX7D_PAD_LCD_DATA15__EIM_DATA15                           0x0104 0x0374 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA15__GPIO3_IO20                           0x0104 0x0374 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA15__SRC_BOOT_CFG15                       0x0104 0x0374 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA16__LCD_DATA16                           0x0108 0x0378 0x0678 0x0 0x2
-#define MX7D_PAD_LCD_DATA16__FLEXTIMER1_CH4                       0x0108 0x0378 0x0594 0x1 0x0
-#define MX7D_PAD_LCD_DATA16__CSI_DATA1                            0x0108 0x0378 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_DATA16__EIM_CRE                              0x0108 0x0378 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA16__GPIO3_IO21                           0x0108 0x0378 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA16__SRC_BOOT_CFG16                       0x0108 0x0378 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA17__LCD_DATA17                           0x010C 0x037C 0x067C 0x0 0x2
-#define MX7D_PAD_LCD_DATA17__FLEXTIMER1_CH5                       0x010C 0x037C 0x0598 0x1 0x0
-#define MX7D_PAD_LCD_DATA17__CSI_DATA0                            0x010C 0x037C 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_DATA17__EIM_ACLK_FREERUN                     0x010C 0x037C 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA17__GPIO3_IO22                           0x010C 0x037C 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA17__SRC_BOOT_CFG17                       0x010C 0x037C 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA18__LCD_DATA18                           0x0110 0x0380 0x0680 0x0 0x2
-#define MX7D_PAD_LCD_DATA18__FLEXTIMER1_CH6                       0x0110 0x0380 0x059C 0x1 0x0
-#define MX7D_PAD_LCD_DATA18__ARM_PLATFORM_EVENTO                  0x0110 0x0380 0x0000 0x2 0x0
-#define MX7D_PAD_LCD_DATA18__CSI_DATA15                           0x0110 0x0380 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_DATA18__EIM_CS2_B                            0x0110 0x0380 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA18__GPIO3_IO23                           0x0110 0x0380 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA18__SRC_BOOT_CFG18                       0x0110 0x0380 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA19__EIM_CS3_B                            0x0114 0x0384 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA19__GPIO3_IO24                           0x0114 0x0384 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA19__SRC_BOOT_CFG19                       0x0114 0x0384 0x0000 0x6 0x0
-#define MX7D_PAD_LCD_DATA19__LCD_DATA19                           0x0114 0x0384 0x0684 0x0 0x2
-#define MX7D_PAD_LCD_DATA19__FLEXTIMER1_CH7                       0x0114 0x0384 0x05A0 0x1 0x0
-#define MX7D_PAD_LCD_DATA19__CSI_DATA14                           0x0114 0x0384 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_DATA20__EIM_ADDR23                           0x0118 0x0388 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA20__GPIO3_IO25                           0x0118 0x0388 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA20__I2C3_SCL                             0x0118 0x0388 0x05E4 0x6 0x1
-#define MX7D_PAD_LCD_DATA20__LCD_DATA20                           0x0118 0x0388 0x0688 0x0 0x2
-#define MX7D_PAD_LCD_DATA20__FLEXTIMER2_CH4                       0x0118 0x0388 0x05BC 0x1 0x0
-#define MX7D_PAD_LCD_DATA20__ENET1_1588_EVENT2_OUT                0x0118 0x0388 0x0000 0x2 0x0
-#define MX7D_PAD_LCD_DATA20__CSI_DATA13                           0x0118 0x0388 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_DATA21__LCD_DATA21                           0x011C 0x038C 0x068C 0x0 0x2
-#define MX7D_PAD_LCD_DATA21__FLEXTIMER2_CH5                       0x011C 0x038C 0x05C0 0x1 0x0
-#define MX7D_PAD_LCD_DATA21__ENET1_1588_EVENT3_OUT                0x011C 0x038C 0x0000 0x2 0x0
-#define MX7D_PAD_LCD_DATA21__CSI_DATA12                           0x011C 0x038C 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_DATA21__EIM_ADDR24                           0x011C 0x038C 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA21__GPIO3_IO26                           0x011C 0x038C 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA21__I2C3_SDA                             0x011C 0x038C 0x05E8 0x6 0x1
-#define MX7D_PAD_LCD_DATA22__LCD_DATA22                           0x0120 0x0390 0x0690 0x0 0x2
-#define MX7D_PAD_LCD_DATA22__FLEXTIMER2_CH6                       0x0120 0x0390 0x05C4 0x1 0x0
-#define MX7D_PAD_LCD_DATA22__ENET2_1588_EVENT2_OUT                0x0120 0x0390 0x0000 0x2 0x0
-#define MX7D_PAD_LCD_DATA22__CSI_DATA11                           0x0120 0x0390 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_DATA22__EIM_ADDR25                           0x0120 0x0390 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA22__GPIO3_IO27                           0x0120 0x0390 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA22__I2C4_SCL                             0x0120 0x0390 0x05EC 0x6 0x1
-#define MX7D_PAD_LCD_DATA23__LCD_DATA23                           0x0124 0x0394 0x0694 0x0 0x2
-#define MX7D_PAD_LCD_DATA23__FLEXTIMER2_CH7                       0x0124 0x0394 0x05C8 0x1 0x0
-#define MX7D_PAD_LCD_DATA23__ENET2_1588_EVENT3_OUT                0x0124 0x0394 0x0000 0x2 0x0
-#define MX7D_PAD_LCD_DATA23__CSI_DATA10                           0x0124 0x0394 0x0000 0x3 0x0
-#define MX7D_PAD_LCD_DATA23__EIM_ADDR26                           0x0124 0x0394 0x0000 0x4 0x0
-#define MX7D_PAD_LCD_DATA23__GPIO3_IO28                           0x0124 0x0394 0x0000 0x5 0x0
-#define MX7D_PAD_LCD_DATA23__I2C4_SDA                             0x0124 0x0394 0x05F0 0x6 0x1
-#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX                      0x0128 0x0398 0x06F4 0x0 0x0
-#define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX                      0x0128 0x0398 0x0000 0x0 0x0
-#define MX7D_PAD_UART1_RX_DATA__I2C1_SCL                          0x0128 0x0398 0x05D4 0x1 0x0
-#define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY                    0x0128 0x0398 0x0000 0x2 0x0
-#define MX7D_PAD_UART1_RX_DATA__ECSPI1_SS1                        0x0128 0x0398 0x0000 0x3 0x0
-#define MX7D_PAD_UART1_RX_DATA__ENET2_1588_EVENT0_IN              0x0128 0x0398 0x0000 0x4 0x0
-#define MX7D_PAD_UART1_RX_DATA__GPIO4_IO0                         0x0128 0x0398 0x0000 0x5 0x0
-#define MX7D_PAD_UART1_RX_DATA__ENET1_MDIO                        0x0128 0x0398 0x0000 0x6 0x0
-#define MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX                      0x012C 0x039C 0x0000 0x0 0x0
-#define MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX                      0x012C 0x039C 0x06F4 0x0 0x1
-#define MX7D_PAD_UART1_TX_DATA__I2C1_SDA                          0x012C 0x039C 0x05D8 0x1 0x0
-#define MX7D_PAD_UART1_TX_DATA__SAI3_MCLK                         0x012C 0x039C 0x0000 0x2 0x0
-#define MX7D_PAD_UART1_TX_DATA__ECSPI1_SS2                        0x012C 0x039C 0x0000 0x3 0x0
-#define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT             0x012C 0x039C 0x0000 0x4 0x0
-#define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1                         0x012C 0x039C 0x0000 0x5 0x0
-#define MX7D_PAD_UART1_TX_DATA__ENET1_MDC                         0x012C 0x039C 0x0000 0x6 0x0
-#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX                      0x0130 0x03A0 0x06FC 0x0 0x2
-#define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX                      0x0130 0x03A0 0x0000 0x0 0x0
-#define MX7D_PAD_UART2_RX_DATA__I2C2_SCL                          0x0130 0x03A0 0x05DC 0x1 0x0
-#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK                      0x0130 0x03A0 0x06C4 0x2 0x0
-#define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3                        0x0130 0x03A0 0x0000 0x3 0x0
-#define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN              0x0130 0x03A0 0x0000 0x4 0x0
-#define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2                         0x0130 0x03A0 0x0000 0x5 0x0
-#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO                        0x0130 0x03A0 0x0574 0x6 0x1
-#define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX                      0x0134 0x03A4 0x0000 0x0 0x0
-#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX                      0x0134 0x03A4 0x06FC 0x0 0x3
-#define MX7D_PAD_UART2_TX_DATA__I2C2_SDA                          0x0134 0x03A4 0x05E0 0x1 0x0
-#define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0                     0x0134 0x03A4 0x06C8 0x2 0x0
-#define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY                        0x0134 0x03A4 0x0000 0x3 0x0
-#define MX7D_PAD_UART2_TX_DATA__ENET2_1588_EVENT1_OUT             0x0134 0x03A4 0x0000 0x4 0x0
-#define MX7D_PAD_UART2_TX_DATA__GPIO4_IO3                         0x0134 0x03A4 0x0000 0x5 0x0
-#define MX7D_PAD_UART2_TX_DATA__ENET2_MDC                         0x0134 0x03A4 0x0000 0x6 0x0
-#define MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX                      0x0138 0x03A8 0x0704 0x0 0x2
-#define MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX                      0x0138 0x03A8 0x0000 0x0 0x0
-#define MX7D_PAD_UART3_RX_DATA__USB_OTG1_OC                       0x0138 0x03A8 0x072C 0x1 0x0
-#define MX7D_PAD_UART3_RX_DATA__SAI3_RX_SYNC                      0x0138 0x03A8 0x06CC 0x2 0x0
-#define MX7D_PAD_UART3_RX_DATA__ECSPI1_MISO                       0x0138 0x03A8 0x0528 0x3 0x0
-#define MX7D_PAD_UART3_RX_DATA__ENET1_1588_EVENT0_IN              0x0138 0x03A8 0x0000 0x4 0x0
-#define MX7D_PAD_UART3_RX_DATA__GPIO4_IO4                         0x0138 0x03A8 0x0000 0x5 0x0
-#define MX7D_PAD_UART3_RX_DATA__SD1_LCTL                          0x0138 0x03A8 0x0000 0x6 0x0
-#define MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX                      0x013C 0x03AC 0x0000 0x0 0x0
-#define MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX                      0x013C 0x03AC 0x0704 0x0 0x3
-#define MX7D_PAD_UART3_TX_DATA__USB_OTG1_PWR                      0x013C 0x03AC 0x0000 0x1 0x0
-#define MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK                      0x013C 0x03AC 0x06D0 0x2 0x0
-#define MX7D_PAD_UART3_TX_DATA__ECSPI1_MOSI                       0x013C 0x03AC 0x052C 0x3 0x0
-#define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT             0x013C 0x03AC 0x0000 0x4 0x0
-#define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5                         0x013C 0x03AC 0x0000 0x5 0x0
-#define MX7D_PAD_UART3_TX_DATA__SD2_LCTL                          0x013C 0x03AC 0x0000 0x6 0x0
-#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS                       0x0140 0x03B0 0x0700 0x0 0x2
-#define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS                       0x0140 0x03B0 0x0000 0x0 0x0
-#define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC                         0x0140 0x03B0 0x0728 0x1 0x0
-#define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0                       0x0140 0x03B0 0x0000 0x2 0x0
-#define MX7D_PAD_UART3_RTS_B__ECSPI1_SCLK                         0x0140 0x03B0 0x0000 0x3 0x0
-#define MX7D_PAD_UART3_RTS_B__ENET1_1588_EVENT1_IN                0x0140 0x03B0 0x0000 0x4 0x0
-#define MX7D_PAD_UART3_RTS_B__GPIO4_IO6                           0x0140 0x03B0 0x0000 0x5 0x0
-#define MX7D_PAD_UART3_RTS_B__SD3_LCTL                            0x0140 0x03B0 0x0000 0x6 0x0
-#define MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS                       0x0144 0x03B4 0x0000 0x0 0x0
-#define MX7D_PAD_UART3_CTS_B__UART3_DTE_RTS                       0x0144 0x03B4 0x0700 0x0 0x3
-#define MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR                        0x0144 0x03B4 0x0000 0x1 0x0
-#define MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC                        0x0144 0x03B4 0x06D4 0x2 0x0
-#define MX7D_PAD_UART3_CTS_B__ECSPI1_SS0                          0x0144 0x03B4 0x0530 0x3 0x0
-#define MX7D_PAD_UART3_CTS_B__ENET1_1588_EVENT1_OUT               0x0144 0x03B4 0x0000 0x4 0x0
-#define MX7D_PAD_UART3_CTS_B__GPIO4_IO7                           0x0144 0x03B4 0x0000 0x5 0x0
-#define MX7D_PAD_UART3_CTS_B__SD1_VSELECT                         0x0144 0x03B4 0x0000 0x6 0x0
-#define MX7D_PAD_I2C1_SCL__I2C1_SCL                               0x0148 0x03B8 0x05D4 0x0 0x1
-#define MX7D_PAD_I2C1_SCL__UART4_DCE_CTS                          0x0148 0x03B8 0x0000 0x1 0x0
-#define MX7D_PAD_I2C1_SCL__UART4_DTE_RTS                          0x0148 0x03B8 0x0708 0x1 0x0
-#define MX7D_PAD_I2C1_SCL__FLEXCAN1_RX                            0x0148 0x03B8 0x04DC 0x2 0x1
-#define MX7D_PAD_I2C1_SCL__ECSPI3_MISO                            0x0148 0x03B8 0x0548 0x3 0x0
-#define MX7D_PAD_I2C1_SCL__GPIO4_IO8                              0x0148 0x03B8 0x0000 0x5 0x0
-#define MX7D_PAD_I2C1_SCL__SD2_VSELECT                            0x0148 0x03B8 0x0000 0x6 0x0
-#define MX7D_PAD_I2C1_SDA__I2C1_SDA                               0x014C 0x03BC 0x05D8 0x0 0x1
-#define MX7D_PAD_I2C1_SDA__UART4_DCE_RTS                          0x014C 0x03BC 0x0708 0x1 0x1
-#define MX7D_PAD_I2C1_SDA__UART4_DTE_CTS                          0x014C 0x03BC 0x0000 0x1 0x0
-#define MX7D_PAD_I2C1_SDA__FLEXCAN1_TX                            0x014C 0x03BC 0x0000 0x2 0x0
-#define MX7D_PAD_I2C1_SDA__ECSPI3_MOSI                            0x014C 0x03BC 0x054C 0x3 0x0
-#define MX7D_PAD_I2C1_SDA__CCM_ENET_REF_CLK1                      0x014C 0x03BC 0x0564 0x4 0x1
-#define MX7D_PAD_I2C1_SDA__GPIO4_IO9                              0x014C 0x03BC 0x0000 0x5 0x0
-#define MX7D_PAD_I2C1_SDA__SD3_VSELECT                            0x014C 0x03BC 0x0000 0x6 0x0
-#define MX7D_PAD_I2C2_SCL__I2C2_SCL                               0x0150 0x03C0 0x05DC 0x0 0x1
-#define MX7D_PAD_I2C2_SCL__UART4_DCE_RX                           0x0150 0x03C0 0x070C 0x1 0x0
-#define MX7D_PAD_I2C2_SCL__UART4_DTE_TX                           0x0150 0x03C0 0x0000 0x1 0x0
-#define MX7D_PAD_I2C2_SCL__WDOG3_WDOG_B                           0x0150 0x03C0 0x0000 0x2 0x0
-#define MX7D_PAD_I2C2_SCL__ECSPI3_SCLK                            0x0150 0x03C0 0x0544 0x3 0x0
-#define MX7D_PAD_I2C2_SCL__CCM_ENET_REF_CLK2                      0x0150 0x03C0 0x0570 0x4 0x2
-#define MX7D_PAD_I2C2_SCL__GPIO4_IO10                             0x0150 0x03C0 0x0000 0x5 0x0
-#define MX7D_PAD_I2C2_SCL__SD3_CD_B                               0x0150 0x03C0 0x0738 0x6 0x1
-#define MX7D_PAD_I2C2_SDA__I2C2_SDA                               0x0154 0x03C4 0x05E0 0x0 0x1
-#define MX7D_PAD_I2C2_SDA__UART4_DCE_TX                           0x0154 0x03C4 0x0000 0x1 0x0
-#define MX7D_PAD_I2C2_SDA__UART4_DTE_RX                           0x0154 0x03C4 0x070C 0x1 0x1
-#define MX7D_PAD_I2C2_SDA__WDOG3_WDOG_RST_B_DEB                   0x0154 0x03C4 0x0000 0x2 0x0
-#define MX7D_PAD_I2C2_SDA__ECSPI3_SS0                             0x0154 0x03C4 0x0550 0x3 0x0
-#define MX7D_PAD_I2C2_SDA__CCM_ENET_REF_CLK3                      0x0154 0x03C4 0x0000 0x4 0x0
-#define MX7D_PAD_I2C2_SDA__GPIO4_IO11                             0x0154 0x03C4 0x0000 0x5 0x0
-#define MX7D_PAD_I2C2_SDA__SD3_WP                                 0x0154 0x03C4 0x073C 0x6 0x1
-#define MX7D_PAD_I2C3_SCL__I2C3_SCL                               0x0158 0x03C8 0x05E4 0x0 0x2
-#define MX7D_PAD_I2C3_SCL__UART5_DCE_CTS                          0x0158 0x03C8 0x0000 0x1 0x0
-#define MX7D_PAD_I2C3_SCL__UART5_DTE_RTS                          0x0158 0x03C8 0x0710 0x1 0x0
-#define MX7D_PAD_I2C3_SCL__FLEXCAN2_RX                            0x0158 0x03C8 0x04E0 0x2 0x1
-#define MX7D_PAD_I2C3_SCL__CSI_VSYNC                              0x0158 0x03C8 0x0520 0x3 0x1
-#define MX7D_PAD_I2C3_SCL__SDMA_EXT_EVENT0                        0x0158 0x03C8 0x06D8 0x4 0x1
-#define MX7D_PAD_I2C3_SCL__GPIO4_IO12                             0x0158 0x03C8 0x0000 0x5 0x0
-#define MX7D_PAD_I2C3_SCL__EPDC_BDR0                              0x0158 0x03C8 0x0000 0x6 0x0
-#define MX7D_PAD_I2C3_SDA__I2C3_SDA                               0x015C 0x03CC 0x05E8 0x0 0x2
-#define MX7D_PAD_I2C3_SDA__UART5_DCE_RTS                          0x015C 0x03CC 0x0710 0x1 0x1
-#define MX7D_PAD_I2C3_SDA__UART5_DTE_CTS                          0x015C 0x03CC 0x0000 0x1 0x0
-#define MX7D_PAD_I2C3_SDA__FLEXCAN2_TX                            0x015C 0x03CC 0x0000 0x2 0x0
-#define MX7D_PAD_I2C3_SDA__CSI_HSYNC                              0x015C 0x03CC 0x0518 0x3 0x1
-#define MX7D_PAD_I2C3_SDA__SDMA_EXT_EVENT1                        0x015C 0x03CC 0x06DC 0x4 0x1
-#define MX7D_PAD_I2C3_SDA__GPIO4_IO13                             0x015C 0x03CC 0x0000 0x5 0x0
-#define MX7D_PAD_I2C3_SDA__EPDC_BDR1                              0x015C 0x03CC 0x0000 0x6 0x0
-#define MX7D_PAD_I2C4_SCL__I2C4_SCL                               0x0160 0x03D0 0x05EC 0x0 0x2
-#define MX7D_PAD_I2C4_SCL__UART5_DCE_RX                           0x0160 0x03D0 0x0714 0x1 0x0
-#define MX7D_PAD_I2C4_SCL__UART5_DTE_TX                           0x0160 0x03D0 0x0000 0x1 0x0
-#define MX7D_PAD_I2C4_SCL__WDOG4_WDOG_B                           0x0160 0x03D0 0x0000 0x2 0x0
-#define MX7D_PAD_I2C4_SCL__CSI_PIXCLK                             0x0160 0x03D0 0x051C 0x3 0x1
-#define MX7D_PAD_I2C4_SCL__USB_OTG1_ID                            0x0160 0x03D0 0x0734 0x4 0x1
-#define MX7D_PAD_I2C4_SCL__GPIO4_IO14                             0x0160 0x03D0 0x0000 0x5 0x0
-#define MX7D_PAD_I2C4_SCL__EPDC_VCOM0                             0x0160 0x03D0 0x0000 0x6 0x0
-#define MX7D_PAD_I2C4_SDA__I2C4_SDA                               0x0164 0x03D4 0x05F0 0x0 0x2
-#define MX7D_PAD_I2C4_SDA__UART5_DCE_TX                           0x0164 0x03D4 0x0000 0x1 0x0
-#define MX7D_PAD_I2C4_SDA__UART5_DTE_RX                           0x0164 0x03D4 0x0714 0x1 0x1
-#define MX7D_PAD_I2C4_SDA__WDOG4_WDOG_RST_B_DEB                   0x0164 0x03D4 0x0000 0x2 0x0
-#define MX7D_PAD_I2C4_SDA__CSI_MCLK                               0x0164 0x03D4 0x0000 0x3 0x0
-#define MX7D_PAD_I2C4_SDA__USB_OTG2_ID                            0x0164 0x03D4 0x0730 0x4 0x1
-#define MX7D_PAD_I2C4_SDA__GPIO4_IO15                             0x0164 0x03D4 0x0000 0x5 0x0
-#define MX7D_PAD_I2C4_SDA__EPDC_VCOM1                             0x0164 0x03D4 0x0000 0x6 0x0
-#define MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK                         0x0168 0x03D8 0x0524 0x0 0x1
-#define MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX                        0x0168 0x03D8 0x071C 0x1 0x2
-#define MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX                        0x0168 0x03D8 0x0000 0x1 0x0
-#define MX7D_PAD_ECSPI1_SCLK__SD2_DATA4                           0x0168 0x03D8 0x0000 0x2 0x0
-#define MX7D_PAD_ECSPI1_SCLK__CSI_DATA2                           0x0168 0x03D8 0x04F8 0x3 0x1
-#define MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16                          0x0168 0x03D8 0x0000 0x5 0x0
-#define MX7D_PAD_ECSPI1_SCLK__EPDC_PWR_COM                        0x0168 0x03D8 0x0000 0x6 0x0
-#define MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI                         0x016C 0x03DC 0x052C 0x0 0x1
-#define MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX                        0x016C 0x03DC 0x0000 0x1 0x0
-#define MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX                        0x016C 0x03DC 0x071C 0x1 0x3
-#define MX7D_PAD_ECSPI1_MOSI__SD2_DATA5                           0x016C 0x03DC 0x0000 0x2 0x0
-#define MX7D_PAD_ECSPI1_MOSI__CSI_DATA3                           0x016C 0x03DC 0x04FC 0x3 0x1
-#define MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17                          0x016C 0x03DC 0x0000 0x5 0x0
-#define MX7D_PAD_ECSPI1_MOSI__EPDC_PWR_STAT                       0x016C 0x03DC 0x0580 0x6 0x1
-#define MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO                         0x0170 0x03E0 0x0528 0x0 0x1
-#define MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS                       0x0170 0x03E0 0x0718 0x1 0x2
-#define MX7D_PAD_ECSPI1_MISO__UART6_DTE_CTS                       0x0170 0x03E0 0x0000 0x1 0x0
-#define MX7D_PAD_ECSPI1_MISO__SD2_DATA6                           0x0170 0x03E0 0x0000 0x2 0x0
-#define MX7D_PAD_ECSPI1_MISO__CSI_DATA4                           0x0170 0x03E0 0x0500 0x3 0x1
-#define MX7D_PAD_ECSPI1_MISO__GPIO4_IO18                          0x0170 0x03E0 0x0000 0x5 0x0
-#define MX7D_PAD_ECSPI1_MISO__EPDC_PWR_IRQ                        0x0170 0x03E0 0x057C 0x6 0x0
-#define MX7D_PAD_ECSPI1_SS0__ECSPI1_SS0                           0x0174 0x03E4 0x0530 0x0 0x1
-#define MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS                        0x0174 0x03E4 0x0000 0x1 0x0
-#define MX7D_PAD_ECSPI1_SS0__UART6_DTE_RTS                        0x0174 0x03E4 0x0718 0x1 0x3
-#define MX7D_PAD_ECSPI1_SS0__SD2_DATA7                            0x0174 0x03E4 0x0000 0x2 0x0
-#define MX7D_PAD_ECSPI1_SS0__CSI_DATA5                            0x0174 0x03E4 0x0504 0x3 0x1
-#define MX7D_PAD_ECSPI1_SS0__GPIO4_IO19                           0x0174 0x03E4 0x0000 0x5 0x0
-#define MX7D_PAD_ECSPI1_SS0__EPDC_PWR_CTRL3                       0x0174 0x03E4 0x0000 0x6 0x0
-#define MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK                         0x0178 0x03E8 0x0534 0x0 0x0
-#define MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX                        0x0178 0x03E8 0x0724 0x1 0x2
-#define MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX                        0x0178 0x03E8 0x0000 0x1 0x0
-#define MX7D_PAD_ECSPI2_SCLK__SD1_DATA4                           0x0178 0x03E8 0x0000 0x2 0x0
-#define MX7D_PAD_ECSPI2_SCLK__CSI_DATA6                           0x0178 0x03E8 0x0508 0x3 0x1
-#define MX7D_PAD_ECSPI2_SCLK__LCD_DATA13                          0x0178 0x03E8 0x066C 0x4 0x2
-#define MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20                          0x0178 0x03E8 0x0000 0x5 0x0
-#define MX7D_PAD_ECSPI2_SCLK__EPDC_PWR_CTRL0                      0x0178 0x03E8 0x0000 0x6 0x0
-#define MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI                         0x017C 0x03EC 0x053C 0x0 0x0
-#define MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX                        0x017C 0x03EC 0x0000 0x1 0x0
-#define MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX                        0x017C 0x03EC 0x0724 0x1 0x3
-#define MX7D_PAD_ECSPI2_MOSI__SD1_DATA5                           0x017C 0x03EC 0x0000 0x2 0x0
-#define MX7D_PAD_ECSPI2_MOSI__CSI_DATA7                           0x017C 0x03EC 0x050C 0x3 0x1
-#define MX7D_PAD_ECSPI2_MOSI__LCD_DATA14                          0x017C 0x03EC 0x0670 0x4 0x2
-#define MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21                          0x017C 0x03EC 0x0000 0x5 0x0
-#define MX7D_PAD_ECSPI2_MOSI__EPDC_PWR_CTRL1                      0x017C 0x03EC 0x0000 0x6 0x0
-#define MX7D_PAD_ECSPI2_MISO__GPIO4_IO22                          0x0180 0x03F0 0x0000 0x5 0x0
-#define MX7D_PAD_ECSPI2_MISO__EPDC_PWR_CTRL2                      0x0180 0x03F0 0x0000 0x6 0x0
-#define MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO                         0x0180 0x03F0 0x0538 0x0 0x0
-#define MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS                       0x0180 0x03F0 0x0720 0x1 0x2
-#define MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS                       0x0180 0x03F0 0x0000 0x1 0x0
-#define MX7D_PAD_ECSPI2_MISO__SD1_DATA6                           0x0180 0x03F0 0x0000 0x2 0x0
-#define MX7D_PAD_ECSPI2_MISO__CSI_DATA8                           0x0180 0x03F0 0x0510 0x3 0x1
-#define MX7D_PAD_ECSPI2_MISO__LCD_DATA15                          0x0180 0x03F0 0x0674 0x4 0x2
-#define MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0                           0x0184 0x03F4 0x0540 0x0 0x0
-#define MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS                        0x0184 0x03F4 0x0000 0x1 0x0
-#define MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS                        0x0184 0x03F4 0x0720 0x1 0x3
-#define MX7D_PAD_ECSPI2_SS0__SD1_DATA7                            0x0184 0x03F4 0x0000 0x2 0x0
-#define MX7D_PAD_ECSPI2_SS0__CSI_DATA9                            0x0184 0x03F4 0x0514 0x3 0x1
-#define MX7D_PAD_ECSPI2_SS0__LCD_RESET                            0x0184 0x03F4 0x0000 0x4 0x0
-#define MX7D_PAD_ECSPI2_SS0__GPIO4_IO23                           0x0184 0x03F4 0x0000 0x5 0x0
-#define MX7D_PAD_ECSPI2_SS0__EPDC_PWR_WAKE                        0x0184 0x03F4 0x0000 0x6 0x0
-#define MX7D_PAD_SD1_CD_B__SD1_CD_B                               0x0188 0x03F8 0x0000 0x0 0x0
-#define MX7D_PAD_SD1_CD_B__UART6_DCE_RX                           0x0188 0x03F8 0x071C 0x2 0x4
-#define MX7D_PAD_SD1_CD_B__UART6_DTE_TX                           0x0188 0x03F8 0x0000 0x2 0x0
-#define MX7D_PAD_SD1_CD_B__ECSPI4_MISO                            0x0188 0x03F8 0x0558 0x3 0x1
-#define MX7D_PAD_SD1_CD_B__FLEXTIMER1_CH0                         0x0188 0x03F8 0x0584 0x4 0x1
-#define MX7D_PAD_SD1_CD_B__GPIO5_IO0                              0x0188 0x03F8 0x0000 0x5 0x0
-#define MX7D_PAD_SD1_CD_B__CCM_CLKO1                              0x0188 0x03F8 0x0000 0x6 0x0
-#define MX7D_PAD_SD1_WP__SD1_WP                                   0x018C 0x03FC 0x0000 0x0 0x0
-#define MX7D_PAD_SD1_WP__UART6_DCE_TX                             0x018C 0x03FC 0x0000 0x2 0x0
-#define MX7D_PAD_SD1_WP__UART6_DTE_RX                             0x018C 0x03FC 0x071C 0x2 0x5
-#define MX7D_PAD_SD1_WP__ECSPI4_MOSI                              0x018C 0x03FC 0x055C 0x3 0x1
-#define MX7D_PAD_SD1_WP__FLEXTIMER1_CH1                           0x018C 0x03FC 0x0588 0x4 0x1
-#define MX7D_PAD_SD1_WP__GPIO5_IO1                                0x018C 0x03FC 0x0000 0x5 0x0
-#define MX7D_PAD_SD1_WP__CCM_CLKO2                                0x018C 0x03FC 0x0000 0x6 0x0
-#define MX7D_PAD_SD1_RESET_B__SD1_RESET_B                         0x0190 0x0400 0x0000 0x0 0x0
-#define MX7D_PAD_SD1_RESET_B__SAI3_MCLK                           0x0190 0x0400 0x0000 0x1 0x0
-#define MX7D_PAD_SD1_RESET_B__UART6_DCE_RTS                       0x0190 0x0400 0x0718 0x2 0x4
-#define MX7D_PAD_SD1_RESET_B__UART6_DTE_CTS                       0x0190 0x0400 0x0000 0x2 0x0
-#define MX7D_PAD_SD1_RESET_B__ECSPI4_SCLK                         0x0190 0x0400 0x0554 0x3 0x1
-#define MX7D_PAD_SD1_RESET_B__FLEXTIMER1_CH2                      0x0190 0x0400 0x058C 0x4 0x1
-#define MX7D_PAD_SD1_RESET_B__GPIO5_IO2                           0x0190 0x0400 0x0000 0x5 0x0
-#define MX7D_PAD_SD1_CLK__SD1_CLK                                 0x0194 0x0404 0x0000 0x0 0x0
-#define MX7D_PAD_SD1_CLK__SAI3_RX_SYNC                            0x0194 0x0404 0x06CC 0x1 0x1
-#define MX7D_PAD_SD1_CLK__UART6_DCE_CTS                           0x0194 0x0404 0x0000 0x2 0x0
-#define MX7D_PAD_SD1_CLK__UART6_DTE_RTS                           0x0194 0x0404 0x0718 0x2 0x5
-#define MX7D_PAD_SD1_CLK__ECSPI4_SS0                              0x0194 0x0404 0x0560 0x3 0x1
-#define MX7D_PAD_SD1_CLK__FLEXTIMER1_CH3                          0x0194 0x0404 0x0590 0x4 0x1
-#define MX7D_PAD_SD1_CLK__GPIO5_IO3                               0x0194 0x0404 0x0000 0x5 0x0
-#define MX7D_PAD_SD1_CMD__SD1_CMD                                 0x0198 0x0408 0x0000 0x0 0x0
-#define MX7D_PAD_SD1_CMD__SAI3_RX_BCLK                            0x0198 0x0408 0x06C4 0x1 0x1
-#define MX7D_PAD_SD1_CMD__ECSPI4_SS1                              0x0198 0x0408 0x0000 0x3 0x0
-#define MX7D_PAD_SD1_CMD__FLEXTIMER2_CH0                          0x0198 0x0408 0x05AC 0x4 0x1
-#define MX7D_PAD_SD1_CMD__GPIO5_IO4                               0x0198 0x0408 0x0000 0x5 0x0
-#define MX7D_PAD_SD1_DATA0__SD1_DATA0                             0x019C 0x040C 0x0000 0x0 0x0
-#define MX7D_PAD_SD1_DATA0__SAI3_RX_DATA0                         0x019C 0x040C 0x06C8 0x1 0x1
-#define MX7D_PAD_SD1_DATA0__UART7_DCE_RX                          0x019C 0x040C 0x0724 0x2 0x4
-#define MX7D_PAD_SD1_DATA0__UART7_DTE_TX                          0x019C 0x040C 0x0000 0x2 0x0
-#define MX7D_PAD_SD1_DATA0__ECSPI4_SS2                            0x019C 0x040C 0x0000 0x3 0x0
-#define MX7D_PAD_SD1_DATA0__FLEXTIMER2_CH1                        0x019C 0x040C 0x05B0 0x4 0x1
-#define MX7D_PAD_SD1_DATA0__GPIO5_IO5                             0x019C 0x040C 0x0000 0x5 0x0
-#define MX7D_PAD_SD1_DATA0__CCM_EXT_CLK1                          0x019C 0x040C 0x04E4 0x6 0x1
-#define MX7D_PAD_SD1_DATA1__SD1_DATA1                             0x01A0 0x0410 0x0000 0x0 0x0
-#define MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK                          0x01A0 0x0410 0x06D0 0x1 0x1
-#define MX7D_PAD_SD1_DATA1__UART7_DCE_TX                          0x01A0 0x0410 0x0000 0x2 0x0
-#define MX7D_PAD_SD1_DATA1__UART7_DTE_RX                          0x01A0 0x0410 0x0724 0x2 0x5
-#define MX7D_PAD_SD1_DATA1__ECSPI4_SS3                            0x01A0 0x0410 0x0000 0x3 0x0
-#define MX7D_PAD_SD1_DATA1__FLEXTIMER2_CH2                        0x01A0 0x0410 0x05B4 0x4 0x1
-#define MX7D_PAD_SD1_DATA1__GPIO5_IO6                             0x01A0 0x0410 0x0000 0x5 0x0
-#define MX7D_PAD_SD1_DATA1__CCM_EXT_CLK2                          0x01A0 0x0410 0x04E8 0x6 0x1
-#define MX7D_PAD_SD1_DATA2__SD1_DATA2                             0x01A4 0x0414 0x0000 0x0 0x0
-#define MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC                          0x01A4 0x0414 0x06D4 0x1 0x1
-#define MX7D_PAD_SD1_DATA2__UART7_DCE_CTS                         0x01A4 0x0414 0x0000 0x2 0x0
-#define MX7D_PAD_SD1_DATA2__UART7_DTE_RTS                         0x01A4 0x0414 0x0720 0x2 0x4
-#define MX7D_PAD_SD1_DATA2__ECSPI4_RDY                            0x01A4 0x0414 0x0000 0x3 0x0
-#define MX7D_PAD_SD1_DATA2__FLEXTIMER2_CH3                        0x01A4 0x0414 0x05B8 0x4 0x1
-#define MX7D_PAD_SD1_DATA2__GPIO5_IO7                             0x01A4 0x0414 0x0000 0x5 0x0
-#define MX7D_PAD_SD1_DATA2__CCM_EXT_CLK3                          0x01A4 0x0414 0x04EC 0x6 0x1
-#define MX7D_PAD_SD1_DATA3__SD1_DATA3                             0x01A8 0x0418 0x0000 0x0 0x0
-#define MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0                         0x01A8 0x0418 0x0000 0x1 0x0
-#define MX7D_PAD_SD1_DATA3__UART7_DCE_RTS                         0x01A8 0x0418 0x0720 0x2 0x5
-#define MX7D_PAD_SD1_DATA3__UART7_DTE_CTS                         0x01A8 0x0418 0x0000 0x2 0x0
-#define MX7D_PAD_SD1_DATA3__ECSPI3_SS1                            0x01A8 0x0418 0x0000 0x3 0x0
-#define MX7D_PAD_SD1_DATA3__FLEXTIMER1_PHA                        0x01A8 0x0418 0x05A4 0x4 0x1
-#define MX7D_PAD_SD1_DATA3__GPIO5_IO8                             0x01A8 0x0418 0x0000 0x5 0x0
-#define MX7D_PAD_SD1_DATA3__CCM_EXT_CLK4                          0x01A8 0x0418 0x04F0 0x6 0x1
-#define MX7D_PAD_SD2_CD_B__SD2_CD_B                               0x01AC 0x041C 0x0000 0x0 0x0
-#define MX7D_PAD_SD2_CD_B__ENET1_MDIO                             0x01AC 0x041C 0x0568 0x1 0x2
-#define MX7D_PAD_SD2_CD_B__ENET2_MDIO                             0x01AC 0x041C 0x0574 0x2 0x2
-#define MX7D_PAD_SD2_CD_B__ECSPI3_SS2                             0x01AC 0x041C 0x0000 0x3 0x0
-#define MX7D_PAD_SD2_CD_B__FLEXTIMER1_PHB                         0x01AC 0x041C 0x05A8 0x4 0x1
-#define MX7D_PAD_SD2_CD_B__GPIO5_IO9                              0x01AC 0x041C 0x0000 0x5 0x0
-#define MX7D_PAD_SD2_CD_B__SDMA_EXT_EVENT0                        0x01AC 0x041C 0x06D8 0x6 0x2
-#define MX7D_PAD_SD2_WP__SD2_WP                                   0x01B0 0x0420 0x0000 0x0 0x0
-#define MX7D_PAD_SD2_WP__ENET1_MDC                                0x01B0 0x0420 0x0000 0x1 0x0
-#define MX7D_PAD_SD2_WP__ENET2_MDC                                0x01B0 0x0420 0x0000 0x2 0x0
-#define MX7D_PAD_SD2_WP__ECSPI3_SS3                               0x01B0 0x0420 0x0000 0x3 0x0
-#define MX7D_PAD_SD2_WP__USB_OTG1_ID                              0x01B0 0x0420 0x0734 0x4 0x2
-#define MX7D_PAD_SD2_WP__GPIO5_IO10                               0x01B0 0x0420 0x0000 0x5 0x0
-#define MX7D_PAD_SD2_WP__SDMA_EXT_EVENT1                          0x01B0 0x0420 0x06DC 0x6 0x2
-#define MX7D_PAD_SD2_RESET_B__SD2_RESET_B                         0x01B4 0x0424 0x0000 0x0 0x0
-#define MX7D_PAD_SD2_RESET_B__SAI2_MCLK                           0x01B4 0x0424 0x0000 0x1 0x0
-#define MX7D_PAD_SD2_RESET_B__SD2_RESET                           0x01B4 0x0424 0x0000 0x2 0x0
-#define MX7D_PAD_SD2_RESET_B__ECSPI3_RDY                          0x01B4 0x0424 0x0000 0x3 0x0
-#define MX7D_PAD_SD2_RESET_B__USB_OTG2_ID                         0x01B4 0x0424 0x0730 0x4 0x2
-#define MX7D_PAD_SD2_RESET_B__GPIO5_IO11                          0x01B4 0x0424 0x0000 0x5 0x0
-#define MX7D_PAD_SD2_CLK__SD2_CLK                                 0x01B8 0x0428 0x0000 0x0 0x0
-#define MX7D_PAD_SD2_CLK__SAI2_RX_SYNC                            0x01B8 0x0428 0x06B8 0x1 0x0
-#define MX7D_PAD_SD2_CLK__MQS_RIGHT                               0x01B8 0x0428 0x0000 0x2 0x0
-#define MX7D_PAD_SD2_CLK__GPT4_CLK                                0x01B8 0x0428 0x0000 0x3 0x0
-#define MX7D_PAD_SD2_CLK__GPIO5_IO12                              0x01B8 0x0428 0x0000 0x5 0x0
-#define MX7D_PAD_SD2_CMD__SD2_CMD                                 0x01BC 0x042C 0x0000 0x0 0x0
-#define MX7D_PAD_SD2_CMD__SAI2_RX_BCLK                            0x01BC 0x042C 0x06B0 0x1 0x0
-#define MX7D_PAD_SD2_CMD__MQS_LEFT                                0x01BC 0x042C 0x0000 0x2 0x0
-#define MX7D_PAD_SD2_CMD__GPT4_CAPTURE1                           0x01BC 0x042C 0x0000 0x3 0x0
-#define MX7D_PAD_SD2_CMD__SIM2_PORT1_TRXD                         0x01BC 0x042C 0x06EC 0x4 0x1
-#define MX7D_PAD_SD2_CMD__GPIO5_IO13                              0x01BC 0x042C 0x0000 0x5 0x0
-#define MX7D_PAD_SD2_DATA0__SD2_DATA0                             0x01C0 0x0430 0x0000 0x0 0x0
-#define MX7D_PAD_SD2_DATA0__SAI2_RX_DATA0                         0x01C0 0x0430 0x06B4 0x1 0x0
-#define MX7D_PAD_SD2_DATA0__UART4_DCE_RX                          0x01C0 0x0430 0x070C 0x2 0x2
-#define MX7D_PAD_SD2_DATA0__UART4_DTE_TX                          0x01C0 0x0430 0x0000 0x2 0x0
-#define MX7D_PAD_SD2_DATA0__GPT4_CAPTURE2                         0x01C0 0x0430 0x0000 0x3 0x0
-#define MX7D_PAD_SD2_DATA0__SIM2_PORT1_CLK                        0x01C0 0x0430 0x0000 0x4 0x0
-#define MX7D_PAD_SD2_DATA0__GPIO5_IO14                            0x01C0 0x0430 0x0000 0x5 0x0
-#define MX7D_PAD_SD2_DATA1__SD2_DATA1                             0x01C4 0x0434 0x0000 0x0 0x0
-#define MX7D_PAD_SD2_DATA1__SAI2_TX_BCLK                          0x01C4 0x0434 0x06BC 0x1 0x0
-#define MX7D_PAD_SD2_DATA1__UART4_DCE_TX                          0x01C4 0x0434 0x0000 0x2 0x0
-#define MX7D_PAD_SD2_DATA1__UART4_DTE_RX                          0x01C4 0x0434 0x070C 0x2 0x3
-#define MX7D_PAD_SD2_DATA1__GPT4_COMPARE1                         0x01C4 0x0434 0x0000 0x3 0x0
-#define MX7D_PAD_SD2_DATA1__SIM2_PORT1_RST_B                      0x01C4 0x0434 0x0000 0x4 0x0
-#define MX7D_PAD_SD2_DATA1__GPIO5_IO15                            0x01C4 0x0434 0x0000 0x5 0x0
-#define MX7D_PAD_SD2_DATA2__SD2_DATA2                             0x01C8 0x0438 0x0000 0x0 0x0
-#define MX7D_PAD_SD2_DATA2__SAI2_TX_SYNC                          0x01C8 0x0438 0x06C0 0x1 0x0
-#define MX7D_PAD_SD2_DATA2__UART4_DCE_CTS                         0x01C8 0x0438 0x0000 0x2 0x0
-#define MX7D_PAD_SD2_DATA2__UART4_DTE_RTS                         0x01C8 0x0438 0x0708 0x2 0x2
-#define MX7D_PAD_SD2_DATA2__GPT4_COMPARE2                         0x01C8 0x0438 0x0000 0x3 0x0
-#define MX7D_PAD_SD2_DATA2__SIM2_PORT1_SVEN                       0x01C8 0x0438 0x0000 0x4 0x0
-#define MX7D_PAD_SD2_DATA2__GPIO5_IO16                            0x01C8 0x0438 0x0000 0x5 0x0
-#define MX7D_PAD_SD2_DATA3__SD2_DATA3                             0x01CC 0x043C 0x0000 0x0 0x0
-#define MX7D_PAD_SD2_DATA3__SAI2_TX_DATA0                         0x01CC 0x043C 0x0000 0x1 0x0
-#define MX7D_PAD_SD2_DATA3__UART4_DCE_RTS                         0x01CC 0x043C 0x0708 0x2 0x3
-#define MX7D_PAD_SD2_DATA3__UART4_DTE_CTS                         0x01CC 0x043C 0x0000 0x2 0x0
-#define MX7D_PAD_SD2_DATA3__GPT4_COMPARE3                         0x01CC 0x043C 0x0000 0x3 0x0
-#define MX7D_PAD_SD2_DATA3__SIM2_PORT1_PD                         0x01CC 0x043C 0x06E8 0x4 0x1
-#define MX7D_PAD_SD2_DATA3__GPIO5_IO17                            0x01CC 0x043C 0x0000 0x5 0x0
-#define MX7D_PAD_SD3_CLK__SD3_CLK                                 0x01D0 0x0440 0x0000 0x0 0x0
-#define MX7D_PAD_SD3_CLK__NAND_CLE                                0x01D0 0x0440 0x0000 0x1 0x0
-#define MX7D_PAD_SD3_CLK__ECSPI4_MISO                             0x01D0 0x0440 0x0558 0x2 0x2
-#define MX7D_PAD_SD3_CLK__SAI3_RX_SYNC                            0x01D0 0x0440 0x06CC 0x3 0x2
-#define MX7D_PAD_SD3_CLK__GPT3_CLK                                0x01D0 0x0440 0x0000 0x4 0x0
-#define MX7D_PAD_SD3_CLK__GPIO6_IO0                               0x01D0 0x0440 0x0000 0x5 0x0
-#define MX7D_PAD_SD3_CMD__SD3_CMD                                 0x01D4 0x0444 0x0000 0x0 0x0
-#define MX7D_PAD_SD3_CMD__NAND_ALE                                0x01D4 0x0444 0x0000 0x1 0x0
-#define MX7D_PAD_SD3_CMD__ECSPI4_MOSI                             0x01D4 0x0444 0x055C 0x2 0x2
-#define MX7D_PAD_SD3_CMD__SAI3_RX_BCLK                            0x01D4 0x0444 0x06C4 0x3 0x2
-#define MX7D_PAD_SD3_CMD__GPT3_CAPTURE1                           0x01D4 0x0444 0x0000 0x4 0x0
-#define MX7D_PAD_SD3_CMD__GPIO6_IO1                               0x01D4 0x0444 0x0000 0x5 0x0
-#define MX7D_PAD_SD3_DATA0__SD3_DATA0                             0x01D8 0x0448 0x0000 0x0 0x0
-#define MX7D_PAD_SD3_DATA0__NAND_DATA00                           0x01D8 0x0448 0x0000 0x1 0x0
-#define MX7D_PAD_SD3_DATA0__ECSPI4_SS0                            0x01D8 0x0448 0x0560 0x2 0x2
-#define MX7D_PAD_SD3_DATA0__SAI3_RX_DATA0                         0x01D8 0x0448 0x06C8 0x3 0x2
-#define MX7D_PAD_SD3_DATA0__GPT3_CAPTURE2                         0x01D8 0x0448 0x0000 0x4 0x0
-#define MX7D_PAD_SD3_DATA0__GPIO6_IO2                             0x01D8 0x0448 0x0000 0x5 0x0
-#define MX7D_PAD_SD3_DATA1__SD3_DATA1                             0x01DC 0x044C 0x0000 0x0 0x0
-#define MX7D_PAD_SD3_DATA1__NAND_DATA01                           0x01DC 0x044C 0x0000 0x1 0x0
-#define MX7D_PAD_SD3_DATA1__ECSPI4_SCLK                           0x01DC 0x044C 0x0554 0x2 0x2
-#define MX7D_PAD_SD3_DATA1__SAI3_TX_BCLK                          0x01DC 0x044C 0x06D0 0x3 0x2
-#define MX7D_PAD_SD3_DATA1__GPT3_COMPARE1                         0x01DC 0x044C 0x0000 0x4 0x0
-#define MX7D_PAD_SD3_DATA1__GPIO6_IO3                             0x01DC 0x044C 0x0000 0x5 0x0
-#define MX7D_PAD_SD3_DATA2__SD3_DATA2                             0x01E0 0x0450 0x0000 0x0 0x0
-#define MX7D_PAD_SD3_DATA2__NAND_DATA02                           0x01E0 0x0450 0x0000 0x1 0x0
-#define MX7D_PAD_SD3_DATA2__I2C3_SDA                              0x01E0 0x0450 0x05E8 0x2 0x3
-#define MX7D_PAD_SD3_DATA2__SAI3_TX_SYNC                          0x01E0 0x0450 0x06D4 0x3 0x2
-#define MX7D_PAD_SD3_DATA2__GPT3_COMPARE2                         0x01E0 0x0450 0x0000 0x4 0x0
-#define MX7D_PAD_SD3_DATA2__GPIO6_IO4                             0x01E0 0x0450 0x0000 0x5 0x0
-#define MX7D_PAD_SD3_DATA3__SD3_DATA3                             0x01E4 0x0454 0x0000 0x0 0x0
-#define MX7D_PAD_SD3_DATA3__NAND_DATA03                           0x01E4 0x0454 0x0000 0x1 0x0
-#define MX7D_PAD_SD3_DATA3__I2C3_SCL                              0x01E4 0x0454 0x05E4 0x2 0x3
-#define MX7D_PAD_SD3_DATA3__SAI3_TX_DATA0                         0x01E4 0x0454 0x0000 0x3 0x0
-#define MX7D_PAD_SD3_DATA3__GPT3_COMPARE3                         0x01E4 0x0454 0x0000 0x4 0x0
-#define MX7D_PAD_SD3_DATA3__GPIO6_IO5                             0x01E4 0x0454 0x0000 0x5 0x0
-#define MX7D_PAD_SD3_DATA4__SD3_DATA4                             0x01E8 0x0458 0x0000 0x0 0x0
-#define MX7D_PAD_SD3_DATA4__NAND_DATA04                           0x01E8 0x0458 0x0000 0x1 0x0
-#define MX7D_PAD_SD3_DATA4__UART3_DCE_RX                          0x01E8 0x0458 0x0704 0x3 0x4
-#define MX7D_PAD_SD3_DATA4__UART3_DTE_TX                          0x01E8 0x0458 0x0000 0x3 0x0
-#define MX7D_PAD_SD3_DATA4__FLEXCAN2_RX                           0x01E8 0x0458 0x04E0 0x4 0x2
-#define MX7D_PAD_SD3_DATA4__GPIO6_IO6                             0x01E8 0x0458 0x0000 0x5 0x0
-#define MX7D_PAD_SD3_DATA5__SD3_DATA5                             0x01EC 0x045C 0x0000 0x0 0x0
-#define MX7D_PAD_SD3_DATA5__NAND_DATA05                           0x01EC 0x045C 0x0000 0x1 0x0
-#define MX7D_PAD_SD3_DATA5__UART3_DCE_TX                          0x01EC 0x045C 0x0000 0x3 0x0
-#define MX7D_PAD_SD3_DATA5__UART3_DTE_RX                          0x01EC 0x045C 0x0704 0x3 0x5
-#define MX7D_PAD_SD3_DATA5__FLEXCAN1_TX                           0x01EC 0x045C 0x0000 0x4 0x0
-#define MX7D_PAD_SD3_DATA5__GPIO6_IO7                             0x01EC 0x045C 0x0000 0x5 0x0
-#define MX7D_PAD_SD3_DATA6__SD3_DATA6                             0x01F0 0x0460 0x0000 0x0 0x0
-#define MX7D_PAD_SD3_DATA6__NAND_DATA06                           0x01F0 0x0460 0x0000 0x1 0x0
-#define MX7D_PAD_SD3_DATA6__SD3_WP                                0x01F0 0x0460 0x073C 0x2 0x2
-#define MX7D_PAD_SD3_DATA6__UART3_DCE_RTS                         0x01F0 0x0460 0x0700 0x3 0x4
-#define MX7D_PAD_SD3_DATA6__UART3_DTE_CTS                         0x01F0 0x0460 0x0000 0x3 0x0
-#define MX7D_PAD_SD3_DATA6__FLEXCAN2_TX                           0x01F0 0x0460 0x0000 0x4 0x0
-#define MX7D_PAD_SD3_DATA6__GPIO6_IO8                             0x01F0 0x0460 0x0000 0x5 0x0
-#define MX7D_PAD_SD3_DATA7__SD3_DATA7                             0x01F4 0x0464 0x0000 0x0 0x0
-#define MX7D_PAD_SD3_DATA7__NAND_DATA07                           0x01F4 0x0464 0x0000 0x1 0x0
-#define MX7D_PAD_SD3_DATA7__SD3_CD_B                              0x01F4 0x0464 0x0738 0x2 0x2
-#define MX7D_PAD_SD3_DATA7__UART3_DCE_CTS                         0x01F4 0x0464 0x0000 0x3 0x0
-#define MX7D_PAD_SD3_DATA7__UART3_DTE_RTS                         0x01F4 0x0464 0x0700 0x3 0x5
-#define MX7D_PAD_SD3_DATA7__FLEXCAN1_RX                           0x01F4 0x0464 0x04DC 0x4 0x2
-#define MX7D_PAD_SD3_DATA7__GPIO6_IO9                             0x01F4 0x0464 0x0000 0x5 0x0
-#define MX7D_PAD_SD3_STROBE__SD3_STROBE                           0x01F8 0x0468 0x0000 0x0 0x0
-#define MX7D_PAD_SD3_STROBE__NAND_RE_B                            0x01F8 0x0468 0x0000 0x1 0x0
-#define MX7D_PAD_SD3_STROBE__GPIO6_IO10                           0x01F8 0x0468 0x0000 0x5 0x0
-#define MX7D_PAD_SD3_RESET_B__SD3_RESET_B                         0x01FC 0x046C 0x0000 0x0 0x0
-#define MX7D_PAD_SD3_RESET_B__NAND_WE_B                           0x01FC 0x046C 0x0000 0x1 0x0
-#define MX7D_PAD_SD3_RESET_B__SD3_RESET                           0x01FC 0x046C 0x0000 0x2 0x0
-#define MX7D_PAD_SD3_RESET_B__SAI3_MCLK                           0x01FC 0x046C 0x0000 0x3 0x0
-#define MX7D_PAD_SD3_RESET_B__GPIO6_IO11                          0x01FC 0x046C 0x0000 0x5 0x0
-#define MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0                      0x0200 0x0470 0x06A0 0x0 0x0
-#define MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B                         0x0200 0x0470 0x0000 0x1 0x0
-#define MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX                       0x0200 0x0470 0x0714 0x2 0x2
-#define MX7D_PAD_SAI1_RX_DATA__UART5_DTE_TX                       0x0200 0x0470 0x0000 0x2 0x0
-#define MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX                        0x0200 0x0470 0x04DC 0x3 0x3
-#define MX7D_PAD_SAI1_RX_DATA__SIM1_PORT1_TRXD                    0x0200 0x0470 0x06E4 0x4 0x1
-#define MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12                         0x0200 0x0470 0x0000 0x5 0x0
-#define MX7D_PAD_SAI1_RX_DATA__SRC_ANY_PU_RESET                   0x0200 0x0470 0x0000 0x7 0x0
-#define MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK                       0x0204 0x0474 0x06A8 0x0 0x0
-#define MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B                         0x0204 0x0474 0x0000 0x1 0x0
-#define MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX                       0x0204 0x0474 0x0000 0x2 0x0
-#define MX7D_PAD_SAI1_TX_BCLK__UART5_DTE_RX                       0x0204 0x0474 0x0714 0x2 0x3
-#define MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX                        0x0204 0x0474 0x0000 0x3 0x0
-#define MX7D_PAD_SAI1_TX_BCLK__SIM1_PORT1_CLK                     0x0204 0x0474 0x0000 0x4 0x0
-#define MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13                         0x0204 0x0474 0x0000 0x5 0x0
-#define MX7D_PAD_SAI1_TX_BCLK__SRC_EARLY_RESET                    0x0204 0x0474 0x0000 0x7 0x0
-#define MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC                       0x0208 0x0478 0x06AC 0x0 0x0
-#define MX7D_PAD_SAI1_TX_SYNC__NAND_DQS                           0x0208 0x0478 0x0000 0x1 0x0
-#define MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS                      0x0208 0x0478 0x0000 0x2 0x0
-#define MX7D_PAD_SAI1_TX_SYNC__UART5_DTE_RTS                      0x0208 0x0478 0x0710 0x2 0x2
-#define MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX                        0x0208 0x0478 0x04E0 0x3 0x3
-#define MX7D_PAD_SAI1_TX_SYNC__SIM1_PORT1_RST_B                   0x0208 0x0478 0x0000 0x4 0x0
-#define MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14                         0x0208 0x0478 0x0000 0x5 0x0
-#define MX7D_PAD_SAI1_TX_SYNC__SRC_INT_BOOT                       0x0208 0x0478 0x0000 0x7 0x0
-#define MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0                      0x020C 0x047C 0x0000 0x0 0x0
-#define MX7D_PAD_SAI1_TX_DATA__NAND_READY_B                       0x020C 0x047C 0x0000 0x1 0x0
-#define MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS                      0x020C 0x047C 0x0710 0x2 0x3
-#define MX7D_PAD_SAI1_TX_DATA__UART5_DTE_CTS                      0x020C 0x047C 0x0000 0x2 0x0
-#define MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX                        0x020C 0x047C 0x0000 0x3 0x0
-#define MX7D_PAD_SAI1_TX_DATA__SIM1_PORT1_SVEN                    0x020C 0x047C 0x0000 0x4 0x0
-#define MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15                         0x020C 0x047C 0x0000 0x5 0x0
-#define MX7D_PAD_SAI1_TX_DATA__SRC_SYSTEM_RESET                   0x020C 0x047C 0x0000 0x7 0x0
-#define MX7D_PAD_SAI1_RX_SYNC__SAI1_RX_SYNC                       0x0210 0x0480 0x06A4 0x0 0x0
-#define MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B                         0x0210 0x0480 0x0000 0x1 0x0
-#define MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC                       0x0210 0x0480 0x06B8 0x2 0x1
-#define MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL                           0x0210 0x0480 0x05EC 0x3 0x3
-#define MX7D_PAD_SAI1_RX_SYNC__SIM1_PORT1_PD                      0x0210 0x0480 0x06E0 0x4 0x1
-#define MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16                         0x0210 0x0480 0x0000 0x5 0x0
-#define MX7D_PAD_SAI1_RX_SYNC__MQS_RIGHT                          0x0210 0x0480 0x0000 0x6 0x0
-#define MX7D_PAD_SAI1_RX_SYNC__SRC_CA7_RESET_B0                   0x0210 0x0480 0x0000 0x7 0x0
-#define MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK                       0x0214 0x0484 0x069C 0x0 0x0
-#define MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B                         0x0214 0x0484 0x0000 0x1 0x0
-#define MX7D_PAD_SAI1_RX_BCLK__SAI2_RX_BCLK                       0x0214 0x0484 0x06B0 0x2 0x1
-#define MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA                           0x0214 0x0484 0x05F0 0x3 0x3
-#define MX7D_PAD_SAI1_RX_BCLK__FLEXTIMER2_PHA                     0x0214 0x0484 0x05CC 0x4 0x1
-#define MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17                         0x0214 0x0484 0x0000 0x5 0x0
-#define MX7D_PAD_SAI1_RX_BCLK__MQS_LEFT                           0x0214 0x0484 0x0000 0x6 0x0
-#define MX7D_PAD_SAI1_RX_BCLK__SRC_CA7_RESET_B1                   0x0214 0x0484 0x0000 0x7 0x0
-#define MX7D_PAD_SAI1_MCLK__SAI1_MCLK                             0x0218 0x0488 0x0000 0x0 0x0
-#define MX7D_PAD_SAI1_MCLK__NAND_WP_B                             0x0218 0x0488 0x0000 0x1 0x0
-#define MX7D_PAD_SAI1_MCLK__SAI2_MCLK                             0x0218 0x0488 0x0000 0x2 0x0
-#define MX7D_PAD_SAI1_MCLK__CCM_PMIC_READY                        0x0218 0x0488 0x04F4 0x3 0x3
-#define MX7D_PAD_SAI1_MCLK__FLEXTIMER2_PHB                        0x0218 0x0488 0x05D0 0x4 0x1
-#define MX7D_PAD_SAI1_MCLK__GPIO6_IO18                            0x0218 0x0488 0x0000 0x5 0x0
-#define MX7D_PAD_SAI1_MCLK__SRC_TESTER_ACK                        0x0218 0x0488 0x0000 0x7 0x0
-#define MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC                       0x021C 0x048C 0x06C0 0x0 0x1
-#define MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO                        0x021C 0x048C 0x0548 0x1 0x1
-#define MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX                       0x021C 0x048C 0x070C 0x2 0x4
-#define MX7D_PAD_SAI2_TX_SYNC__UART4_DTE_TX                       0x021C 0x048C 0x0000 0x2 0x0
-#define MX7D_PAD_SAI2_TX_SYNC__UART1_DCE_CTS                      0x021C 0x048C 0x0000 0x3 0x0
-#define MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS                      0x021C 0x048C 0x06F0 0x3 0x0
-#define MX7D_PAD_SAI2_TX_SYNC__FLEXTIMER2_CH4                     0x021C 0x048C 0x05BC 0x4 0x1
-#define MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19                         0x021C 0x048C 0x0000 0x5 0x0
-#define MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK                       0x0220 0x0490 0x06BC 0x0 0x1
-#define MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI                        0x0220 0x0490 0x054C 0x1 0x1
-#define MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX                       0x0220 0x0490 0x0000 0x2 0x0
-#define MX7D_PAD_SAI2_TX_BCLK__UART4_DTE_RX                       0x0220 0x0490 0x070C 0x2 0x5
-#define MX7D_PAD_SAI2_TX_BCLK__UART1_DCE_RTS                      0x0220 0x0490 0x06F0 0x3 0x1
-#define MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS                      0x0220 0x0490 0x0000 0x3 0x0
-#define MX7D_PAD_SAI2_TX_BCLK__FLEXTIMER2_CH5                     0x0220 0x0490 0x05C0 0x4 0x1
-#define MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20                         0x0220 0x0490 0x0000 0x5 0x0
-#define MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0                      0x0224 0x0494 0x06B4 0x0 0x1
-#define MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK                        0x0224 0x0494 0x0544 0x1 0x1
-#define MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS                      0x0224 0x0494 0x0000 0x2 0x0
-#define MX7D_PAD_SAI2_RX_DATA__UART4_DTE_RTS                      0x0224 0x0494 0x0708 0x2 0x4
-#define MX7D_PAD_SAI2_RX_DATA__UART2_DCE_CTS                      0x0224 0x0494 0x0000 0x3 0x0
-#define MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS                      0x0224 0x0494 0x06F8 0x3 0x2
-#define MX7D_PAD_SAI2_RX_DATA__FLEXTIMER2_CH6                     0x0224 0x0494 0x05C4 0x4 0x1
-#define MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21                         0x0224 0x0494 0x0000 0x5 0x0
-#define MX7D_PAD_SAI2_RX_DATA__KPP_COL7                           0x0224 0x0494 0x0610 0x6 0x1
-#define MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0                      0x0228 0x0498 0x0000 0x0 0x0
-#define MX7D_PAD_SAI2_TX_DATA__ECSPI3_SS0                         0x0228 0x0498 0x0550 0x1 0x1
-#define MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS                      0x0228 0x0498 0x0708 0x2 0x5
-#define MX7D_PAD_SAI2_TX_DATA__UART4_DTE_CTS                      0x0228 0x0498 0x0000 0x2 0x0
-#define MX7D_PAD_SAI2_TX_DATA__UART2_DCE_RTS                      0x0228 0x0498 0x06F8 0x3 0x3
-#define MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS                      0x0228 0x0498 0x0000 0x3 0x0
-#define MX7D_PAD_SAI2_TX_DATA__FLEXTIMER2_CH7                     0x0228 0x0498 0x05C8 0x4 0x1
-#define MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22                         0x0228 0x0498 0x0000 0x5 0x0
-#define MX7D_PAD_SAI2_TX_DATA__KPP_ROW7                           0x0228 0x0498 0x0630 0x6 0x1
-#define MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0                 0x022C 0x049C 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_RD0__PWM1_OUT                        0x022C 0x049C 0x0000 0x1 0x0
-#define MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL                        0x022C 0x049C 0x05E4 0x2 0x4
-#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DCE_CTS                   0x022C 0x049C 0x0000 0x3 0x0
-#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DTE_RTS                   0x022C 0x049C 0x06F0 0x3 0x2
-#define MX7D_PAD_ENET1_RGMII_RD0__EPDC_VCOM0                      0x022C 0x049C 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0                       0x022C 0x049C 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_RGMII_RD0__KPP_ROW3                        0x022C 0x049C 0x0620 0x6 0x1
-#define MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1                 0x0230 0x04A0 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_RD1__PWM2_OUT                        0x0230 0x04A0 0x0000 0x1 0x0
-#define MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA                        0x0230 0x04A0 0x05E8 0x2 0x4
-#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DCE_RTS                   0x0230 0x04A0 0x06F0 0x3 0x3
-#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DTE_CTS                   0x0230 0x04A0 0x0000 0x3 0x0
-#define MX7D_PAD_ENET1_RGMII_RD1__EPDC_VCOM1                      0x0230 0x04A0 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1                       0x0230 0x04A0 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_RGMII_RD1__KPP_COL3                        0x0230 0x04A0 0x0600 0x6 0x1
-#define MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2                 0x0234 0x04A4 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX                     0x0234 0x04A4 0x04DC 0x1 0x4
-#define MX7D_PAD_ENET1_RGMII_RD2__ECSPI2_SCLK                     0x0234 0x04A4 0x0534 0x2 0x1
-#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DCE_RX                    0x0234 0x04A4 0x06F4 0x3 0x2
-#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DTE_TX                    0x0234 0x04A4 0x0000 0x3 0x0
-#define MX7D_PAD_ENET1_RGMII_RD2__EPDC_SDCE4                      0x0234 0x04A4 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2                       0x0234 0x04A4 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_RGMII_RD2__KPP_ROW2                        0x0234 0x04A4 0x061C 0x6 0x1
-#define MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3                 0x0238 0x04A8 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX                     0x0238 0x04A8 0x0000 0x1 0x0
-#define MX7D_PAD_ENET1_RGMII_RD3__ECSPI2_MOSI                     0x0238 0x04A8 0x053C 0x2 0x1
-#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DCE_TX                    0x0238 0x04A8 0x0000 0x3 0x0
-#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DTE_RX                    0x0238 0x04A8 0x06F4 0x3 0x3
-#define MX7D_PAD_ENET1_RGMII_RD3__EPDC_SDCE5                      0x0238 0x04A8 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3                       0x0238 0x04A8 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_RGMII_RD3__KPP_COL2                        0x0238 0x04A8 0x05FC 0x6 0x1
-#define MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL           0x023C 0x04AC 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_RX_CTL__ECSPI2_SS1                   0x023C 0x04AC 0x0000 0x2 0x0
-#define MX7D_PAD_ENET1_RGMII_RX_CTL__EPDC_SDCE6                   0x023C 0x04AC 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4                    0x023C 0x04AC 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_RGMII_RX_CTL__KPP_ROW1                     0x023C 0x04AC 0x0618 0x6 0x1
-#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC                 0x0240 0x04B0 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER                     0x0240 0x04B0 0x0000 0x1 0x0
-#define MX7D_PAD_ENET1_RGMII_RXC__ECSPI2_SS2                      0x0240 0x04B0 0x0000 0x2 0x0
-#define MX7D_PAD_ENET1_RGMII_RXC__EPDC_SDCE7                      0x0240 0x04B0 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5                       0x0240 0x04B0 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_RGMII_RXC__KPP_COL1                        0x0240 0x04B0 0x0000 0x6 0x0
-#define MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0                 0x0244 0x04B4 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_TD0__PWM3_OUT                        0x0244 0x04B4 0x0000 0x1 0x0
-#define MX7D_PAD_ENET1_RGMII_TD0__ECSPI2_SS3                      0x0244 0x04B4 0x0000 0x2 0x0
-#define MX7D_PAD_ENET1_RGMII_TD0__EPDC_SDCE8                      0x0244 0x04B4 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6                       0x0244 0x04B4 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_RGMII_TD0__KPP_ROW0                        0x0244 0x04B4 0x0614 0x6 0x1
-#define MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1                 0x0248 0x04B8 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_TD1__PWM4_OUT                        0x0248 0x04B8 0x0000 0x1 0x0
-#define MX7D_PAD_ENET1_RGMII_TD1__ECSPI2_RDY                      0x0248 0x04B8 0x0000 0x2 0x0
-#define MX7D_PAD_ENET1_RGMII_TD1__EPDC_SDCE9                      0x0248 0x04B8 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7                       0x0248 0x04B8 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_RGMII_TD1__KPP_COL0                        0x0248 0x04B8 0x05F4 0x6 0x1
-#define MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2                 0x024C 0x04BC 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_TD2__FLEXCAN2_RX                     0x024C 0x04BC 0x04E0 0x1 0x4
-#define MX7D_PAD_ENET1_RGMII_TD2__ECSPI2_MISO                     0x024C 0x04BC 0x0538 0x2 0x1
-#define MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL                        0x024C 0x04BC 0x05EC 0x3 0x4
-#define MX7D_PAD_ENET1_RGMII_TD2__EPDC_SDOED                      0x024C 0x04BC 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8                       0x024C 0x04BC 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3                 0x0250 0x04C0 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_TD3__FLEXCAN2_TX                     0x0250 0x04C0 0x0000 0x1 0x0
-#define MX7D_PAD_ENET1_RGMII_TD3__ECSPI2_SS0                      0x0250 0x04C0 0x0540 0x2 0x1
-#define MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA                        0x0250 0x04C0 0x05F0 0x3 0x4
-#define MX7D_PAD_ENET1_RGMII_TD3__EPDC_SDOEZ                      0x0250 0x04C0 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9                       0x0250 0x04C0 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS                0x0250 0x04C0 0x0000 0x7 0x0
-#define MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL           0x0254 0x04C4 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC                 0x0254 0x04C4 0x06A4 0x2 0x1
-#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1                0x0254 0x04C4 0x0000 0x3 0x0
-#define MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2               0x0254 0x04C4 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10                   0x0254 0x04C4 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC                 0x0258 0x04C8 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER                     0x0258 0x04C8 0x0000 0x1 0x0
-#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK                    0x0258 0x04C8 0x069C 0x2 0x1
-#define MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2                   0x0258 0x04C8 0x0000 0x3 0x0
-#define MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3                  0x0258 0x04C8 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11                      0x0258 0x04C8 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_TX_CLK__ENET1_TX_CLK                       0x025C 0x04CC 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_TX_CLK__CCM_ENET_REF_CLK1                  0x025C 0x04CC 0x0564 0x1 0x2
-#define MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0                      0x025C 0x04CC 0x06A0 0x2 0x1
-#define MX7D_PAD_ENET1_TX_CLK__GPT2_COMPARE3                      0x025C 0x04CC 0x0000 0x3 0x0
-#define MX7D_PAD_ENET1_TX_CLK__EPDC_PWR_IRQ                       0x025C 0x04CC 0x057C 0x4 0x1
-#define MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12                         0x025C 0x04CC 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1                       0x025C 0x04CC 0x04E4 0x6 0x2
-#define MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0                     0x025C 0x04CC 0x0000 0x7 0x0
-#define MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK                       0x0260 0x04D0 0x056C 0x0 0x0
-#define MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B                       0x0260 0x04D0 0x0000 0x1 0x0
-#define MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK                       0x0260 0x04D0 0x06A8 0x2 0x1
-#define MX7D_PAD_ENET1_RX_CLK__GPT2_CLK                           0x0260 0x04D0 0x0000 0x3 0x0
-#define MX7D_PAD_ENET1_RX_CLK__EPDC_PWR_WAKE                      0x0260 0x04D0 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13                         0x0260 0x04D0 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_RX_CLK__CCM_EXT_CLK2                       0x0260 0x04D0 0x04E8 0x6 0x2
-#define MX7D_PAD_ENET1_RX_CLK__CSU_ALARM_AUT1                     0x0260 0x04D0 0x0000 0x7 0x0
-#define MX7D_PAD_ENET1_CRS__ENET1_CRS                             0x0264 0x04D4 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_CRS__WDOG2_WDOG_RST_B_DEB                  0x0264 0x04D4 0x0000 0x1 0x0
-#define MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC                          0x0264 0x04D4 0x06AC 0x2 0x1
-#define MX7D_PAD_ENET1_CRS__GPT2_CAPTURE1                         0x0264 0x04D4 0x0000 0x3 0x0
-#define MX7D_PAD_ENET1_CRS__EPDC_PWR_CTRL0                        0x0264 0x04D4 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_CRS__GPIO7_IO14                            0x0264 0x04D4 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_CRS__CCM_EXT_CLK3                          0x0264 0x04D4 0x04EC 0x6 0x2
-#define MX7D_PAD_ENET1_CRS__CSU_ALARM_AUT2                        0x0264 0x04D4 0x0000 0x7 0x0
-#define MX7D_PAD_ENET1_COL__ENET1_COL                             0x0268 0x04D8 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY                        0x0268 0x04D8 0x0000 0x1 0x0
-#define MX7D_PAD_ENET1_COL__SAI1_TX_DATA0                         0x0268 0x04D8 0x0000 0x2 0x0
-#define MX7D_PAD_ENET1_COL__GPT2_CAPTURE2                         0x0268 0x04D8 0x0000 0x3 0x0
-#define MX7D_PAD_ENET1_COL__EPDC_PWR_CTRL1                        0x0268 0x04D8 0x0000 0x4 0x0
-#define MX7D_PAD_ENET1_COL__GPIO7_IO15                            0x0268 0x04D8 0x0000 0x5 0x0
-#define MX7D_PAD_ENET1_COL__CCM_EXT_CLK4                          0x0268 0x04D8 0x04F0 0x6 0x2
-#define MX7D_PAD_ENET1_COL__CSU_INT_DEB                           0x0268 0x04D8 0x0000 0x7 0x0
-
-#endif /* __DTS_IMX7D_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
deleted file mode 100644
index 92cb45dacda61..0000000000000
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ /dev/null
@@ -1,595 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
- *
- */
-
-/dts-v1/;
-
-#include "imx7d.dtsi"
-#include <dt-bindings/input/linux-event-codes.h>
-
-/ {
-	model = "reMarkable 2.0";
-	compatible = "remarkable,imx7d-remarkable2", "fsl,imx7d";
-
-	chosen {
-		stdout-path = &uart6;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	thermal-zones {
-		epd-thermal {
-			thermal-sensors = <&sy7636a>;
-			polling-delay-passive = <30000>;
-			polling-delay = <30000>;
-
-			trips {
-				trip0 {
-					temperature = <49000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip1 {
-					temperature = <50000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	reg_brcm: regulator-brcm {
-		compatible = "regulator-fixed";
-		regulator-name = "brcm_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <150>;
-	};
-
-	reg_digitizer: regulator-digitizer {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_3V3_DIGITIZER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&pinctrl_digitizer_reg>;
-		pinctrl-1 = <&pinctrl_digitizer_reg>;
-		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <100000>; /* 100 ms */
-	};
-
-	reg_touch: regulator-touch {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_3V3_TOUCH";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch_reg>;
-		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi>;
-		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
-		clock-names = "ext_clock";
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&buck1>;
-};
-
-&clks {
-	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
-			  <&clks IMX7D_CLKO2_ROOT_DIV>;
-	assigned-clock-parents = <&clks IMX7D_CKIL>;
-	assigned-clock-rates = <0>, <32768>;
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	wacom_digitizer: digitizer@9 {
-		compatible = "hid-over-i2c";
-		reg = <0x09>;
-		hid-descr-addr = <0x01>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wacom>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		touchscreen-inverted-x;
-		touchscreen-inverted-y;
-		vdd-supply = <&reg_digitizer>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	bd71815: pmic@4b {
-		compatible = "rohm,bd71815";
-		reg = <0x4b>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bd71815>;
-		interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		gpio-controller;
-		clocks = <&clks IMX7D_CLKO2_ROOT_SRC>;
-		clock-output-names = "bd71815-32k-out";
-		#clock-cells = <0>;
-		#gpio-cells = <2>;
-
-		regulators {
-			buck1: buck1 {
-				regulator-name = "buck1";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <1250>;
-			};
-
-			buck2: buck2 {
-				regulator-name = "buck2";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <1250>;
-			};
-
-			buck3: buck3 {
-				regulator-name = "buck3";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <2700000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck4: buck4 {
-				regulator-name = "buck4";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck5: buck5 {
-				regulator-name = "buck5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo1: ldo1 {
-				regulator-name = "ldo1";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2: ldo2 {
-				regulator-name = "ldo2";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo3: ldo3 {
-				regulator-name = "ldo3";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo4: ldo4 {
-				regulator-name = "ldo4";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo5: ldo5 {
-				regulator-name = "ldo5";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo6: ldodvref {
-				regulator-name = "ldodvref";
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo7: ldolpsr {
-				regulator-name = "ldolpsr";
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			boost: wled {
-				regulator-name = "wled";
-				regulator-min-microamp = <10>;
-				regulator-max-microamp = <25000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@24 {
-		compatible = "cypress,tt21000";
-		reg = <0x24>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		vdd-supply = <&reg_touch>;
-		touchscreen-size-x = <880>;
-		touchscreen-size-y = <1280>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@0 {
-			reg = <0>;
-			linux,keycodes = <KEY_HOMEPAGE>;
-		};
-
-		button@1 {
-			reg = <1>;
-			linux,keycodes = <KEY_MENU>;
-		};
-
-		button@2 {
-			reg = <2>;
-			linux,keycodes = <KEY_BACK>;
-		};
-
-		button@3 {
-			reg = <3>;
-			linux,keycodes = <KEY_SEARCH>;
-		};
-
-		button@4 {
-			reg = <4>;
-			linux,keycodes = <KEY_VOLUMEDOWN>;
-		};
-
-		button@5 {
-			reg = <5>;
-			linux,keycodes = <KEY_VOLUMEUP>;
-		};
-
-		button@6 {
-			reg = <6>;
-			linux,keycodes = <KEY_CAMERA>;
-		};
-
-		button@7 {
-			reg = <7>;
-			linux,keycodes = <KEY_POWER>;
-		};
-	};
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	pinctrl-1 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	sy7636a: pmic@62 {
-		compatible = "silergy,sy7636a";
-		reg = <0x62>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_epdpmic>;
-		#thermal-sensor-cells = <0>;
-		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
-
-		regulators {
-			reg_epdpmic: vcom {
-				regulator-name = "vcom";
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&usbotg2 {
-	srp-disable;
-	hnp-disable;
-	status = "okay";
-};
-
-&usdhc2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	vmmc-supply = <&reg_brcm>;
-	bus-width = <4>;
-	non-removable;
-	keep-power-in-suspend;
-	cap-power-off-card;
-	status = "okay";
-
-	brcmf: bcrmf@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc3>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc_lpsr {
-	pinctrl_digitizer_reg: digitizerreggrp {
-		fsl,pins = <
-			/* DIGITIZER_PWR_EN */
-			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14
-		>;
-	};
-
-	pinctrl_wacom: wacomgrp {
-		fsl,pins = <
-			/*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x00000014 FWE */
-			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x00000074 /* PDCTB */
-			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x00000034 /* WACOM INT */
-			/*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x00000014 WACOM PWR ENABLE */
-			/*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x00000074 WACOM RESET */
-		>;
-	};
-};
-
-&iomuxc {
-	pinctrl_bd71815: bd71815grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x59
-		>;
-	};
-
-	pinctrl_brcm_reg: brcmreggrp {
-		fsl,pins = <
-			/* WIFI_PWR_EN */
-			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
-		>;
-	};
-
-	pinctrl_epdpmic: epdpmicgrp {
-		fsl,pins = <
-			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x00000074
-			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x00000014
-		>;
-	};
-
-	pinctrl_touch: touchgrp {
-		fsl,pins = <
-			/* CYTTSP interrupt */
-			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x54
-			/* CYTTSP reset */
-			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x04
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
-			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
-			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
-			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
-			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_touch_reg: touchreggrp {
-		fsl,pins = <
-			/* TOUCH_PWR_EN */
-			MX7D_PAD_GPIO1_IO11__GPIO1_IO11		0x14
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX		0x79
-			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX		0x79
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
-			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
-			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
-			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
-			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
-			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
-			MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
-			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
-			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
-			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
-			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
-			MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
-			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
-			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
-			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
-			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY	0x74
-		>;
-	};
-
-	pinctrl_wifi: wifigrp {
-		fsl,pins = <
-			/* WiFi Reg On */
-			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x00000014
-			/* WiFi Sleep 32k */
-			MX7D_PAD_SD1_WP__CCM_CLKO2		0x00000014
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
deleted file mode 100644
index f8a8685527071..0000000000000
--- a/arch/arm/boot/dts/imx7d-sbc-imx7.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Support for CompuLab SBC-iMX7 Single Board Computer
- *
- * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
- * Author: Ilya Ledvich <ilya@compulab.co.il>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- */
-
-#include "imx7d-cl-som-imx7.dts"
-
-/ {
-	model = "CompuLab SBC-iMX7";
-	compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	wakeup-source;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
-			MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-sdb-reva.dts b/arch/arm/boot/dts/imx7d-sdb-reva.dts
deleted file mode 100644
index cabdaa6dc518d..0000000000000
--- a/arch/arm/boot/dts/imx7d-sdb-reva.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright (C) 2015 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx7d-sdb.dts"
-
-/ {
-	model = "Freescale i.MX7 SabreSD RevA Board";
-	compatible = "fsl,imx7d-sdb-reva", "fsl,imx7d";
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
-		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&fec2 {
-	/delete-property/phy-supply;
-};
-
-&iomuxc {
-	imx7d-sdb {
-		pinctrl_tsc2046_pendown: tsc2046_pendown {
-			fsl,pins = <
-				MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x59
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
-			>;
-		};
-
-		pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp {
-			fsl,pins = <
-				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-sdb-sht11.dts b/arch/arm/boot/dts/imx7d-sdb-sht11.dts
deleted file mode 100644
index 996555596d402..0000000000000
--- a/arch/arm/boot/dts/imx7d-sdb-sht11.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright (C) 2015 Freescale Semiconductor, Inc.
-
-#include "imx7d-sdb.dts"
-
-/ {
-	sensor {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sensor>;
-		compatible = "sensirion,sht15";
-		clk-gpios = <&gpio4 12 0>;
-		data-gpios = <&gpio4 13 0>;
-		vcc-supply = <&reg_sht15>;
-	};
-
-	reg_sht15: regulator-sht15 {
-		compatible = "regulator-fixed";
-		regulator-name = "reg_sht15";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&i2c3 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_sensor: sensorgrp {
-		fsl,pins = <
-			MX7D_PAD_I2C3_SDA__GPIO4_IO13	0x4000007f
-			MX7D_PAD_I2C3_SCL__GPIO4_IO12	0x4000007f
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
deleted file mode 100644
index 234e5fc647b22..0000000000000
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ /dev/null
@@ -1,862 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright (C) 2015 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx7d.dtsi"
-
-/ {
-	model = "Freescale i.MX7 SabreSD Board";
-	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	spi-4 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_spi4>;
-		gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		extended_io: gpio-expander@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <1>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg2_vbus";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vref_1v8: regulator-vref-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_brcm: regulator-brcm {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-name = "brcm_reg";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_can2_3v3: regulator-can2-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can2-3v3";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flexcan2_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_fec2_3v3: regulator-fec2-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fec2-3v3";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_enet2_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	panel {
-		compatible = "innolux,at043tn24";
-		backlight = <&backlight>;
-		power-supply = <&reg_lcd_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx7d-evk-wm8960",
-			     "fsl,imx-audio-wm8960";
-		model = "wm8960-audio";
-		audio-cpu = <&sai1>;
-		audio-codec = <&codec>;
-		hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-		audio-routing =
-			"Headphone Jack", "HP_L",
-			"Headphone Jack", "HP_R",
-			"Ext Spk", "SPK_LP",
-			"Ext Spk", "SPK_LN",
-			"Ext Spk", "SPK_RP",
-			"Ext Spk", "SPK_RN",
-			"LINPUT1", "AMIC",
-			"AMIC", "MICB";
-	};
-
-	sound-hdmi {
-		compatible = "fsl,imx-audio-sii902x";
-		model = "sii902x-audio";
-		audio-cpu = <&sai3>;
-		hdmi-out;
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&adc2 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&cpu1 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	tsc2046@0 {
-		compatible = "ti,tsc2046";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <29 0>;
-		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
-		touchscreen-max-pressure = <255>;
-		wakeup-source;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy1>;
-	phy-supply = <&reg_fec2_3v3>;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can2_3v3>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze3000@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	mpl3115@60 {
-		compatible = "fsl,mpl3115";
-		reg = <0x60>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	codec: wm8960@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		clock-names = "mclk";
-		wlf,shared-lrclk;
-		wlf,hp-cfg = <2 2 3>;
-		wlf,gpio-cfg = <1 3>;
-		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
-				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-		assigned-clock-rates = <0>, <884736000>, <12288000>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&reg_1p0d {
-	vin-supply = <&sw2_reg>;
-};
-
-&reg_1p2 {
-	vin-supply = <&sw2_reg>;
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
-			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-			  <&clks IMX7D_SAI1_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <884736000>, <36864000>;
-	status = "okay";
-};
-
-&sai3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>;
-	assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
-			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-			  <&clks IMX7D_SAI3_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <884736000>, <36864000>;
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	wakeup-source;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	wakeup-source;
-	keep-power-in-suspend;
-	non-removable;
-	vmmc-supply = <&reg_brcm>;
-	fsl,tuning-step = <2>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	fsl,tuning-step = <2>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx7d-sdb {
-		pinctrl_brcm_reg: brcmreggrp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x14
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO	0x2
-				MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI	0x2
-				MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK	0x2
-				MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x59
-			>;
-		};
-
-		pinctrl_enet1: enet1grp {
-			fsl,pins = <
-				MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
-				MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
-				MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
-				MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
-				MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
-				MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
-				MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
-				MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
-				MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
-				MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
-				MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
-				MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
-				MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
-				MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
-			>;
-		};
-
-		pinctrl_enet2: enet2grp {
-			fsl,pins = <
-				MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
-				MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
-				MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
-				MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
-				MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
-				MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
-				MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
-				MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
-				MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
-				MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
-				MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
-				MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
-			>;
-		};
-
-		pinctrl_enet2_reg: enet2reggrp {
-			fsl,pins = <
-				MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x14
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
-				MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
-			>;
-		};
-
-		pinctrl_flexcan2_reg: flexcan2reggrp {
-			fsl,pins = <
-				MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x59	/* CAN_STBY */
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio_keysgrp {
-			fsl,pins = <
-				MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x59
-				MX7D_PAD_SD2_WP__GPIO5_IO10		0x59
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
-				MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x59  /* headphone detect */
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
-				MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
-				MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
-				MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
-				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_lcdif: lcdifgrp {
-			fsl,pins = <
-				MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
-				MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
-				MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
-				MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
-				MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
-				MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
-				MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
-				MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
-				MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
-				MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
-				MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
-				MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
-				MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
-				MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
-				MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
-				MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
-				MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
-				MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
-				MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
-				MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
-				MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
-				MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
-				MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
-				MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
-				MX7D_PAD_LCD_CLK__LCD_CLK		0x79
-				MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
-				MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
-				MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
-				MX7D_PAD_LCD_RESET__LCD_RESET		0x79
-			>;
-		};
-
-		pinctrl_sai1: sai1grp {
-			fsl,pins = <
-				MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
-				MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
-				MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
-				MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
-				MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
-			>;
-		};
-
-		pinctrl_sai2: sai2grp {
-			fsl,pins = <
-				MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK     0x1f
-				MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC     0x1f
-				MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0    0x30
-				MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0    0x1f
-			>;
-		};
-
-		pinctrl_sai3: sai3grp {
-			fsl,pins = <
-				MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK   0x1f
-				MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC     0x1f
-				MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0    0x30
-			>;
-		};
-
-		pinctrl_spi4: spi4grp {
-			fsl,pins = <
-				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
-				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
-				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
-			>;
-		};
-
-		pinctrl_tsc2046_pendown: tsc2046_pendown {
-			fsl,pins = <
-				MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-				MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX	0x79
-				MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX	0x79
-				MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS	0x79
-				MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS	0x79
-			>;
-		};
-
-		pinctrl_uart6: uart6grp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
-				MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
-				MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
-				MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
-				MX7D_PAD_SD1_CLK__SD1_CLK		0x19
-				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
-				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
-				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
-				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
-				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
-				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
-				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX7D_PAD_SD2_CMD__SD2_CMD		0x59
-				MX7D_PAD_SD2_CLK__SD2_CLK		0x19
-				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
-				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
-				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
-				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
-			>;
-		};
-
-		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
-			fsl,pins = <
-				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
-				MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
-				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
-				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
-				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
-				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
-			>;
-		};
-
-		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
-			fsl,pins = <
-				MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
-				MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
-				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
-				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
-				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
-				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
-			>;
-		};
-
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-				MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-			fsl,pins = <
-				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
-				MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
-				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
-				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
-				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
-				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
-				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
-				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
-				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
-				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
-				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-			fsl,pins = <
-				MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
-				MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
-				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
-				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
-				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
-				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
-				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
-				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
-				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
-				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
-				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&iomuxc_lpsr {
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B		0x74
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x30
-		>;
-	};
-
-	pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	  0x14
-		>;
-	};
-
-	pinctrl_sai3_mclk: sai3grp_mclk {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK	0x1f
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/imx7d-smegw01.dts
deleted file mode 100644
index c0f00f5db11e1..0000000000000
--- a/arch/arm/boot/dts/imx7d-smegw01.dts
+++ /dev/null
@@ -1,468 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-//
-// Copyright (C) 2020 PHYTEC Messtechnik GmbH
-// Author: Jens Lang  <J.Lang@phytec.de>
-// Copyright (C) 2021 Fabio Estevam <festevam@denx.de>
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx7d.dtsi"
-
-/ {
-	model = "Storopack SMEGW01 board";
-	compatible = "storopack,imx7d-smegw01", "fsl,imx7d";
-
-	aliases {
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc3;
-		mmc2 = &usdhc2;
-		rtc0 = &i2c_rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reg_lte_on: regulator-lte-on {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lte_on>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "lte_on";
-		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_lte_nreset: regulator-lte-nreset {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lte_nreset>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "LTE_nReset";
-		gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_wifi: regulator-wifi {
-		compatible = "regulator-fixed";
-		gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi>;
-		regulator-name = "wifi_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_wlan_rfkill: regulator-wlan-rfkill {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-2 = <&pinctrl_rfkill>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "wlan_rfkill";
-		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_usbotg_vbus: regulator-usbotg-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	sram@0 {
-		compatible = "microchip,48l640";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <16000000>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@1 {
-			compatible = "ethernet-phy-id0022.1622",
-				     "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-			reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-		};
-
-		ethphy1: ethernet-phy@2 {
-			compatible = "ethernet-phy-id0022.1622",
-				     "ethernet-phy-ieee802.3-c22";
-			reg = <2>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy1>;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 =<&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	i2c_rtc: rtc@52 {
-		compatible = "microcrystal,rv3028";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc_int>;
-		reg = <0x52>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1_lpsr>;
-	dr_mode = "otg";
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg2>;
-	over-current-active-low;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	wakeup-source;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&reg_wifi>;
-	wakeup-source;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	max-frequency = <200000000>;
-	bus-width = <8>;
-	fsl,tuning-step = <1>;
-	non-removable;
-	cap-mmc-highspeed;
-	cap-mmc-hw-reset;
-	mmc-hs200-1_8v;
-	mmc-ddr-1_8v;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19	0x04
-			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x04
-			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x04
-			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x04
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x5
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x5
-			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x5
-			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x5
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x5
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x5
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x5
-			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x5
-			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x5
-			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x5
-			MX7D_PAD_GPIO1_IO10__ENET1_MDIO		0x7
-			MX7D_PAD_GPIO1_IO11__ENET1_MDC		0x7
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5
-			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC	0x5
-			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0	0x5
-			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1	0x5
-			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2	0x5
-			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3	0x5
-			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0	0x5
-			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1	0x5
-			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2	0x5
-			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3	0x5
-			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5
-			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC	0x5
-			MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x08
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000004
-			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000004
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x0b0b0
-			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x0b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x0b0b0
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x0b0b0
-		>;
-	};
-
-	pinctrl_lte_on: lteongrp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x17059
-		>;
-	};
-
-	pinctrl_lte_nreset: ltenresetgrp {
-		fsl,pins = <
-			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x17059
-		>;
-	};
-
-	pinctrl_rfkill: rfkillrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x17059
-		>;
-	};
-
-	pinctrl_rtc_int: rtcintgrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x17059
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x74
-			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x7c
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x7c
-			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x74
-		>;
-	};
-
-	pinctrl_usbotg1_lpsr: usbotg1 {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x04
-		>;
-	};
-
-	pinctrl_usbotg1_pwr: usbotg1-pwr {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR	0x04
-		>;
-	};
-
-	pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x04
-		>;
-	};
-
-	pinctrl_usbotg2: usbotg2grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x5c
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
-			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
-			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
-			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
-			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
-			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
-			MX7D_PAD_SD2_CD_B__SD2_CD_B		0x08
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5d
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1d
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5d
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5d
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5d
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5d
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5d
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5d
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5d
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5d
-			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1d
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5e
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1e
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5e
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5e
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5e
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5e
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5e
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5e
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5e
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5e
-			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1e
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5f
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x0f
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5f
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5f
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5f
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5f
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5f
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5f
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5f
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5f
-			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1f
-		>;
-	};
-
-	pinctrl_wifi: wifigrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x04
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x04
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi
deleted file mode 100644
index 3ee2017c1ab37..0000000000000
--- a/arch/arm/boot/dts/imx7d-tqma7.dtsi
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Include file for TQ-Systems TQMa7D board with NXP i.MX7Dual SoC.
- *
- * Copyright (C) 2016 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-#include "imx7d.dtsi"
-#include "imx7-tqma7.dtsi"
-
-&cpu1 {
-	cpu-supply = <&sw1a_reg>;
-};
diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
deleted file mode 100644
index 521493342fe97..0000000000000
--- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts
+++ /dev/null
@@ -1,357 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device tree file for ZII's RMU2 board
- *
- * RMU - Remote Modem Unit
- *
- * Copyright (C) 2019 Zodiac Inflight Innovations
- */
-
-/dts-v1/;
-#include <dt-bindings/thermal/thermal.h>
-#include "imx7d.dtsi"
-
-/ {
-	model = "ZII RMU2 Board";
-	compatible = "zii,imx7d-rmu2", "fsl,imx7d";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pinctrl_leds_debug>;
-		pinctrl-names = "default";
-
-		led-debug {
-			label = "zii:green:debug1";
-			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&fec1_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fec1_phy: ethernet-phy@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_enet1_phy_reset>,
-				    <&pinctrl_enet1_phy_interrupt>;
-			reg = <0>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c04";
-		reg = <0x50>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c04";
-		reg = <0x52>;
-	};
-};
-
-&snvs_rtc {
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-
-	mcu {
-		compatible = "zii,rave-sp-rdu2";
-		current-speed = <1000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		watchdog {
-			compatible = "zii,rave-sp-watchdog";
-		};
-
-		eeprom@a3 {
-			compatible = "zii,rave-sp-eeprom";
-			reg = <0xa3 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			zii,eeprom-name = "main-eeprom";
-		};
-	};
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <4>;
-	no-1-8-v;
-	no-sdio;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	no-sdio;
-	no-sd;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x2
-			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x2
-			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x2
-			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19         0x59
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CD_B__ENET1_MDIO				0x3
-			MX7D_PAD_SD2_WP__ENET1_MDC				0x3
-			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x1
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x1
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x1
-			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x1
-			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x1
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL		0x1
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x1
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x1
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x1
-			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x1
-			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x1
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL		0x1
-		>;
-	};
-
-	pinctrl_enet1_phy_reset: enet1phyresetgrp {
-		fsl,pins = <
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14
-
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
-			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_leds_debug: ledsgrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x59
-		>;
-	};
-
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
-			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_DATA0__UART4_DCE_RX	0x79
-			MX7D_PAD_SD2_DATA1__UART4_DCE_TX	0x79
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x59
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp {
-		fsl,phy = <
-			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x08
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
deleted file mode 100644
index decc19af3b83c..0000000000000
--- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts
+++ /dev/null
@@ -1,923 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device tree file for ZII's RPU2 board
- *
- * RPU - Remote Peripheral Unit
- *
- * Copyright (C) 2019 Zodiac Inflight Innovations
- */
-
-/dts-v1/;
-#include <dt-bindings/thermal/thermal.h>
-#include "imx7d.dtsi"
-
-/ {
-	model = "ZII RPU2 Board";
-	compatible = "zii,imx7d-rpu2", "fsl,imx7d";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	cs2000_ref: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	cs2000_in_dummy: dummy-oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pinctrl_leds_debug>;
-		pinctrl-names = "default";
-
-		led-debug {
-			label = "zii:green:debug1";
-			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
-			      <&adc2 1>;
-	};
-
-	reg_can1_stby: regulator-can1-stby {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flexcan1_stby>;
-		regulator-name = "can1-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_can2_stby: regulator-can2-stby {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flexcan2_stby>;
-		regulator-name = "can2-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vref_1v8: regulator-vref-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "GEN_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v_main: regulator-5p0v-main {
-		compatible = "regulator-fixed";
-		regulator-name = "5V_MAIN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	sound1 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Audio Output 1";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound1_codec>;
-		simple-audio-card,frame-master = <&sound1_codec>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPLEFT",
-			"Headphone Jack", "HPRIGHT",
-			"LEFTIN", "HPL",
-			"RIGHTIN", "HPR";
-		simple-audio-card,aux-devs = <&hpa1>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai1>;
-		};
-
-		sound1_codec: simple-audio-card,codec {
-			sound-dai = <&codec1>;
-			clocks = <&cs2000>;
-		};
-	};
-
-	sound2 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Audio Output 2";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound2_codec>;
-		simple-audio-card,frame-master = <&sound2_codec>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPLEFT",
-			"Headphone Jack", "HPRIGHT",
-			"LEFTIN", "HPL",
-			"RIGHTIN", "HPR";
-		simple-audio-card,aux-devs = <&hpa2>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-		};
-
-		sound2_codec: simple-audio-card,codec {
-			sound-dai = <&codec2>;
-			clocks = <&cs2000>;
-		};
-	};
-
-	sound3 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Audio Output 3";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound3_codec>;
-		simple-audio-card,frame-master = <&sound3_codec>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPLEFT",
-			"Headphone Jack", "HPRIGHT",
-			"LEFTIN", "HPL",
-			"RIGHTIN", "HPR";
-		simple-audio-card,aux-devs = <&hpa3>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai3>;
-		};
-
-		sound3_codec: simple-audio-card,codec {
-			sound-dai = <&codec3>;
-			clocks = <&cs2000>;
-		};
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&adc2 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&clks {
-	assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <884736000>;
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
-	status = "okay";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-
-	mdio1: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		switch: switch@0 {
-			compatible = "marvell,mv88e6085";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_switch>;
-			reg = <0>;
-			eeprom-length = <512>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "eth_cu_1000_1";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "eth_cu_1000_2";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "pic";
-
-					fixed-link {
-						speed = <100>;
-						full-duplex;
-					};
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "cpu";
-					ethernet = <&fec1>;
-					phy-mode = "rgmii-id";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "gigabit_proc";
-					ethernet = <&fec2>;
-					phy-mode = "rgmii-id";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
-	fsl,magic-packet;
-	status = "okay";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can1_stby>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can2_stby>;
-	status = "okay";
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1>;
-
-	gpio-line-names = "", "", "", "", "", "", "", "",
-			  "", "",
-			  "usb_1_en_b",
-			  "usb_2_en_b",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "";
-};
-
-&gpio2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio2>;
-
-	gpio-line-names = "12v_out_en_1",
-			  "12v_out_en_2",
-			  "12v_out_en_3",
-			  "28v_out_en_5",
-			  "28v_out_en_1",
-			  "28v_out_en_2",
-			  "28v_out_en_3",
-			  "28v_out_en_4",
-			  "", "",
-			  "usb_3_en_b",
-			  "usb_4_en_b",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pmic@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	cs2000: clkgen@4e {
-		compatible = "cirrus,cs2000-cp";
-		reg = <0x4e>;
-		#clock-cells = <0>;
-		clock-names = "clk_in", "ref_clk";
-		clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
-		assigned-clocks = <&cs2000>;
-		assigned-clock-rates = <24000000>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c04";
-		reg = <0x50>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c04";
-		reg = <0x52>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec2: codec@18 {
-		compatible = "ti,tlv320dac3100";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec2>;
-		reg = <0x18>;
-		#sound-dai-cells = <0>;
-		HPVDD-supply = <&reg_3p3v>;
-		SPRVDD-supply = <&reg_3p3v>;
-		SPLVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_3p3v>;
-		IOVDD-supply = <&reg_3p3v>;
-		DVDD-supply = <&vgen4_reg>;
-		gpio-reset = <&gpio1 6 GPIO_ACTIVE_LOW>;
-	};
-
-	hpa2: amp@60 {
-		compatible = "ti,tpa6130a2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tpa2>;
-		reg = <0x60>;
-		power-gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
-		Vdd-supply = <&reg_5p0v_main>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	codec3: codec@18 {
-		compatible = "ti,tlv320dac3100";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec3>;
-		reg = <0x18>;
-		#sound-dai-cells = <0>;
-		HPVDD-supply = <&reg_3p3v>;
-		SPRVDD-supply = <&reg_3p3v>;
-		SPLVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_3p3v>;
-		IOVDD-supply = <&reg_3p3v>;
-		DVDD-supply = <&vgen4_reg>;
-		gpio-reset = <&gpio1 7 GPIO_ACTIVE_LOW>;
-	};
-
-	hpa3: amp@60 {
-		compatible = "ti,tpa6130a2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tpa3>;
-		reg = <0x60>;
-		power-gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-		Vdd-supply = <&reg_5p0v_main>;
-	};
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	codec1: codec@18 {
-		compatible = "ti,tlv320dac3100";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec1>;
-		reg = <0x18>;
-		#sound-dai-cells = <0>;
-		HPVDD-supply = <&reg_3p3v>;
-		SPRVDD-supply = <&reg_3p3v>;
-		SPLVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_3p3v>;
-		IOVDD-supply = <&reg_3p3v>;
-		DVDD-supply = <&vgen4_reg>;
-		gpio-reset = <&gpio1 5 GPIO_ACTIVE_LOW>;
-	};
-
-	hpa1: amp@60 {
-		compatible = "ti,tpa6130a2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tpa1>;
-		reg = <0x60>;
-		power-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
-		Vdd-supply = <&reg_5p0v_main>;
-	};
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
-			  <&clks IMX7D_SAI1_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <36864000>;
-	status = "okay";
-};
-
-&sai2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	assigned-clocks = <&clks IMX7D_SAI2_ROOT_SRC>,
-			  <&clks IMX7D_SAI2_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <36864000>;
-	status = "okay";
-};
-
-&sai3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai3>;
-	assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
-			  <&clks IMX7D_SAI3_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <36864000>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-
-	mcu {
-		compatible = "zii,rave-sp-rdu2";
-		current-speed = <1000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		watchdog {
-			compatible = "zii,rave-sp-watchdog";
-		};
-
-		eeprom@a3 {
-			compatible = "zii,rave-sp-eeprom";
-			reg = <0xa3 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			zii,eeprom-name = "main-eeprom";
-		};
-	};
-};
-
-&usbotg1 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <4>;
-	no-1-8-v;
-	no-sdio;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	no-sdio;
-	no-sd;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&snvs_rtc {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x2
-			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x2
-			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x2
-			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19         0x59
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CD_B__ENET1_MDIO				0x3
-			MX7D_PAD_SD2_WP__ENET1_MDC				0x3
-			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x1
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x1
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x1
-			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x1
-			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x1
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL		0x1
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x1
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x1
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x1
-			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x1
-			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x1
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL		0x1
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC			0x1
-			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0			0x1
-			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1			0x1
-			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2			0x1
-			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3			0x1
-			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL			0x1
-			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC			0x1
-			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0			0x1
-			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1			0x1
-			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2			0x1
-			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3			0x1
-			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL			0x1
-			MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT		0x1
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x59
-			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x59
-		>;
-	};
-
-	pinctrl_flexcan1_stby: flexcan1stbygrp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO08__GPIO1_IO8		0x59
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
-		>;
-	};
-
-	pinctrl_flexcan2_stby: flexcan2stbygrp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x59
-		>;
-	};
-
-	pinctrl_gpio1: gpio1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x00
-			MX7D_PAD_GPIO1_IO11__GPIO1_IO11		0x00
-		>;
-	};
-
-	pinctrl_gpio2: gpio2grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x00
-			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x00
-			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x00
-			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x03
-			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x03
-			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x03
-			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x03
-			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x03
-			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x00
-			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x00
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
-			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
-			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
-			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3gpiogrp {
-		fsl,pins = <
-			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x4000007f
-			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
-			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c4_gpio: i2c4gpiogrp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x4000007f
-			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x4000007f
-		>;
-	};
-
-	pinctrl_leds_debug: debuggrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x59
-		>;
-	};
-
-	pinctrl_sai1: sai1grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1f
-			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
-			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x30
-		>;
-	};
-
-	pinctrl_sai2: sai2grp {
-		fsl,pins = <
-			MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK	0x1f
-			MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC	0x1f
-			MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0	0x30
-		>;
-	};
-
-	pinctrl_sai3: sai3grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK	0x1f
-			MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC	0x1f
-			MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0	0x30
-		>;
-	};
-
-	pinctrl_tpa1: tpa6130-1grp {
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x40000038
-		>;
-	};
-
-	pinctrl_tpa2: tpa6130-2grp {
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x40000038
-		>;
-	};
-
-	pinctrl_tpa3: tpa6130-3grp {
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x40000038
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
-			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_DATA0__UART4_DCE_RX	0x79
-			MX7D_PAD_SD2_DATA1__UART4_DCE_TX	0x79
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x59
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_codec1: dac1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x40000038
-		>;
-	};
-
-	pinctrl_codec2: dac2grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x40000038
-		>;
-	};
-
-	pinctrl_codec3: dac3grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x40000038
-		>;
-	};
-
-	pinctrl_switch: switchgrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x08
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
deleted file mode 100644
index 4b94b8afb55d9..0000000000000
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ /dev/null
@@ -1,229 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2015 Freescale Semiconductor, Inc.
-// Copyright 2016 Toradex AG
-
-#include "imx7s.dtsi"
-#include <dt-bindings/reset/imx7-reset.h>
-
-/ {
-	aliases {
-		usb0 = &usbotg1;
-		usb1 = &usbotg2;
-		usb2 = &usbh;
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			clock-frequency = <996000000>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-			nvmem-cells = <&fuse_grade>;
-			nvmem-cell-names = "speed_grade";
-		};
-
-		cpu1: cpu@1 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <1>;
-			clock-frequency = <996000000>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-			cpu-idle-states = <&cpu_sleep_wait>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&intc>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-792000000 {
-			opp-hz = /bits/ 64 <792000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <150000>;
-			opp-supported-hw = <0xd>, <0x7>;
-			opp-suspend;
-		};
-
-		opp-996000000 {
-			opp-hz = /bits/ 64 <996000000>;
-			opp-microvolt = <1100000>;
-			clock-latency-ns = <150000>;
-			opp-supported-hw = <0xc>, <0x7>;
-			opp-suspend;
-		};
-
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1225000>;
-			clock-latency-ns = <150000>;
-			opp-supported-hw = <0x8>, <0x3>;
-			opp-suspend;
-		};
-	};
-
-	usbphynop2: usbphynop2 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX7D_USB_PHY2_CLK>;
-		clock-names = "main_clk";
-		#phy-cells = <0>;
-	};
-
-	soc: soc {
-		etm@3007d000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x3007d000 0x1000>;
-
-			/*
-			 * System will hang if added nosmp in kernel command line
-			 * without arm,primecell-periphid because amba bus try to
-			 * read id and core1 power off at this time.
-			 */
-			arm,primecell-periphid = <0xbb956>;
-			cpu = <&cpu1>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				port {
-					etm1_out_port: endpoint {
-						remote-endpoint = <&ca_funnel_in_port1>;
-					};
-				};
-			};
-		};
-
-		intc: interrupt-controller@31001000 {
-			compatible = "arm,cortex-a7-gic";
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupt-parent = <&intc>;
-			reg = <0x31001000 0x1000>,
-			      <0x31002000 0x2000>,
-			      <0x31004000 0x2000>,
-			      <0x31006000 0x2000>;
-		};
-
-		pcie: pcie@33800000 {
-			compatible = "fsl,imx7d-pcie";
-			reg = <0x33800000 0x4000>,
-			      <0x4ff00000 0x80000>;
-			reg-names = "dbi", "config";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			bus-range = <0x00 0xff>;
-			ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000>, /* downstream I/O */
-				 <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
-			num-lanes = <1>;
-			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			/*
-			 * Reference manual lists pci irqs incorrectly
-			 * Real hardware ordering is same as imx6: D+MSI, C, B, A
-			 */
-			interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
-				 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
-				 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
-			clock-names = "pcie", "pcie_bus", "pcie_phy";
-			assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
-					  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
-			assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
-						 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-
-			fsl,max-link-speed = <2>;
-			power-domains = <&pgc_pcie_phy>;
-			resets = <&src IMX7_RESET_PCIEPHY>,
-				 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
-				 <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
-			reset-names = "pciephy", "apps", "turnoff";
-			fsl,imx7d-pcie-phy = <&pcie_phy>;
-			status = "disabled";
-		};
-	};
-};
-
-&aips2 {
-	pcie_phy: pcie-phy@306d0000 {
-		  compatible = "fsl,imx7d-pcie-phy";
-		  reg = <0x306d0000 0x10000>;
-		  status = "disabled";
-	};
-
-	pxp: pxp@30700000 {
-		compatible = "fsl,imx7d-pxp";
-		reg = <0x30700000 0x10000>;
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX7D_PXP_CLK>;
-		clock-names = "axi";
-	};
-};
-
-&aips3 {
-	usbotg2: usb@30b20000 {
-		compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-		reg = <0x30b20000 0x200>;
-		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX7D_USB_CTRL_CLK>;
-		fsl,usbphy = <&usbphynop2>;
-		fsl,usbmisc = <&usbmisc2 0>;
-		phy-clkgate-delay-us = <400>;
-		status = "disabled";
-	};
-
-	usbmisc2: usbmisc@30b20200 {
-		#index-cells = <1>;
-		compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-		reg = <0x30b20200 0x200>;
-	};
-
-	fec2: ethernet@30bf0000 {
-		compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
-		reg = <0x30bf0000 0x10000>;
-		interrupt-names = "int0", "int1", "int2", "pps";
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX7D_ENET2_IPG_ROOT_CLK>,
-			<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-			<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
-			<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
-			<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
-		clock-names = "ipg", "ahb", "ptp",
-			"enet_clk_ref", "enet_out";
-		fsl,num-tx-queues = <3>;
-		fsl,num-rx-queues = <3>;
-		fsl,stop-mode = <&gpr 0x10 4>;
-		status = "disabled";
-	};
-};
-
-&ca_funnel_in_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	port@1 {
-		reg = <1>;
-		ca_funnel_in_port1: endpoint {
-			remote-endpoint = <&etm1_out_port>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx7s-colibri-aster.dts b/arch/arm/boot/dts/imx7s-colibri-aster.dts
deleted file mode 100644
index 58ebb02d948a6..0000000000000
--- a/arch/arm/boot/dts/imx7s-colibri-aster.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017-2022 Toradex
- *
- */
-
-/dts-v1/;
-#include "imx7s-colibri.dtsi"
-#include "imx7-colibri-aster.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7S on Aster Carrier Board";
-	compatible = "toradex,colibri-imx7s-aster",
-		     "toradex,colibri-imx7s",
-		     "fsl,imx7s";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
deleted file mode 100644
index 38de76630d6a5..0000000000000
--- a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2016-2022 Toradex
- */
-
-/dts-v1/;
-#include "imx7s-colibri.dtsi"
-#include "imx7-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx7s-eval-v3",
-		     "toradex,colibri-imx7s",
-		     "fsl,imx7s";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-/*
- * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
- * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
- */
-&atmel_mxt_ts {
-	status = "disabled";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
-
-/* Colibri PWM<B> */
-&pwm2 {
-	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
-	status = "okay";
-};
-
-/* Colibri PWM<C> */
-&pwm3 {
-	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts b/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts
deleted file mode 100644
index 72b5c17ab1abb..0000000000000
--- a/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/dts-v1/;
-#include "imx7s-colibri.dtsi"
-#include "imx7-colibri-iris-v2.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7S on Iris V2 Carrier Board";
-	compatible = "toradex,colibri-imx7s-iris-v2",
-		     "toradex,colibri-imx7s",
-		     "fsl,imx7s";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&gpio2 {
-	/*
-	 * This switches the LVDS transceiver to VESA color mapping mode.
-	 */
-	lvds-color-map-hog {
-		gpio-hog;
-		gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
-		line-name = "LVDS_COLOR_MAP";
-		output-low;
-	};
-};
-
-&gpio7 {
-	/*
-	 * This switches the LVDS transceiver to the 24-bit RGB mode.
-	 */
-	lvds-rgb-mode-hog {
-		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
-		line-name = "LVDS_RGB_MODE";
-		output-low;
-	};
-
-	/*
-	 * This switches the LVDS transceiver to the single-channel
-	 * output mode.
-	 */
-	lvds-ch-mode-hog {
-		gpio-hog;
-		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
-		line-name = "LVDS_CH_MODE";
-		output-high;
-	};
-
-	/* This turns the LVDS transceiver on */
-	lvds-power-on-hog {
-		gpio-hog;
-		gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
-		line-name = "LVDS_POWER_ON";
-		output-high;
-	};
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7s-colibri-iris.dts b/arch/arm/boot/dts/imx7s-colibri-iris.dts
deleted file mode 100644
index 26ba72c17feb7..0000000000000
--- a/arch/arm/boot/dts/imx7s-colibri-iris.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/dts-v1/;
-#include "imx7s-colibri.dtsi"
-#include "imx7-colibri-iris.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7S on Iris Carrier Board";
-	compatible = "toradex,colibri-imx7s-iris",
-		     "toradex,colibri-imx7s",
-		     "fsl,imx7s";
-};
-
-&ad7879_ts {
-	status = "okay";
-};
-
-/*
- * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
- * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
- */
-&atmel_mxt_ts {
-	status = "disabled";
-};
-
-&backlight {
-	status = "okay";
-};
-
-&lcdif {
-	status = "okay";
-};
-
-&panel_dpi {
-	status = "okay";
-};
-
-/* Colibri PWM<B> */
-&pwm2 {
-	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
-	status = "okay";
-};
-
-/* Colibri PWM<C> */
-&pwm3 {
-	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi
deleted file mode 100644
index ef51395d35377..0000000000000
--- a/arch/arm/boot/dts/imx7s-colibri.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2016-2022 Toradex
- */
-
-#include "imx7s.dtsi"
-#include "imx7-colibri.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-};
-
-/* NAND */
-&gpmi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7s-mba7.dts b/arch/arm/boot/dts/imx7s-mba7.dts
deleted file mode 100644
index 8e4cf589c92c1..0000000000000
--- a/arch/arm/boot/dts/imx7s-mba7.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Source for TQ-Systems TQMa7S board on MBa7 carrier board.
- *
- * Copyright (C) 2016 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-/dts-v1/;
-
-#include "imx7s-tqma7.dtsi"
-#include "imx7-mba7.dtsi"
-
-/ {
-	model = "TQ-Systems TQMa7S board on MBa7 carrier board";
-	compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s";
-};
diff --git a/arch/arm/boot/dts/imx7s-tqma7.dtsi b/arch/arm/boot/dts/imx7s-tqma7.dtsi
deleted file mode 100644
index 7a190fdb2d30c..0000000000000
--- a/arch/arm/boot/dts/imx7s-tqma7.dtsi
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Include file for TQ-Systems TQMa7S board with NXP i.MX7Solo SoC.
- *
- * Copyright (C) 2016 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-#include "imx7s.dtsi"
-#include "imx7-tqma7.dtsi"
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
deleted file mode 100644
index e8734d218b9de..0000000000000
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ /dev/null
@@ -1,500 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 NXP Semiconductors.
- * Author: Fabio Estevam <fabio.estevam@nxp.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "imx7s.dtsi"
-
-/ {
-	model = "Element14 Warp i.MX7 Board";
-	compatible = "element14,imx7s-warp", "fsl,imx7s";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pinctrl_gpio>;
-		autorepeat;
-
-		back {
-			label = "Back";
-			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_BACK>;
-			wakeup-source;
-		};
-	};
-
-	reg_brcm: regulator-brcm {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		regulator-name = "brcm_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
-	reg_bt: regulator-bt {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bt_reg>;
-		enable-active-high;
-		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
-		regulator-name = "bt_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_peri_3p15v: regulator-peri-3p15v {
-		compatible = "regulator-fixed";
-		regulator-name = "peri_3p15v_reg";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "imx7-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,cpu {
-			sound-dai = <&sai1>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		};
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <884736000>;
-};
-
-&csi {
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze3000@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ov2680: camera@36 {
-		compatible = "ovti,ov2680";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov2680>;
-		reg = <0x36>;
-		clocks = <&osc>;
-		clock-names = "xvclk";
-		reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		DOVDD-supply = <&sw2_reg>;
-		DVDD-supply = <&sw2_reg>;
-		AVDD-supply = <&reg_peri_3p15v>;
-
-		port {
-			ov2680_to_mipi: endpoint {
-				remote-endpoint = <&mipi_from_sensor>;
-				clock-lanes = <0>;
-				data-lanes = <1>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sai1_mclk>;
-		VDDA-supply = <&vgen4_reg>;
-		VDDIO-supply = <&vgen4_reg>;
-		VDDD-supply = <&vgen2_reg>;
-	};
-
-	mpl3115@60 {
-		compatible = "fsl,mpl3115";
-		reg = <0x60>;
-	};
-};
-
-&mipi_csi {
-	clock-frequency = <166000000>;
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-
-			mipi_from_sensor: endpoint {
-				remote-endpoint = <&ov2680_to_mipi>;
-				data-lanes = <1>;
-			};
-		};
-	};
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
-			  <&clks IMX7D_SAI1_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <36864000>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-};
-
-&uart3  {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	fsl,dte-mode;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <4>;
-	keep-power-in-suspend;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&reg_brcm>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	no-1-8-v;
-	fsl,tuning-step = <2>;
-	non-removable;
-	status = "okay";
-};
-
-&video_mux {
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_brcm_reg: brcmreggrp {
-		fsl,pins = <
-			MX7D_PAD_SD2_WP__GPIO5_IO10	0x14 /* WL_REG_ON */
-		>;
-	};
-
-	pinctrl_bt_reg: btreggrp {
-		fsl,pins = <
-			MX7D_PAD_SD2_DATA3__GPIO5_IO17	0x14 /* BT_REG_ON */
-		>;
-	};
-
-	pinctrl_gpio: gpiogrp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1	0x14
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
-			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SDA__I2C2_SDA	0x4000007f
-			MX7D_PAD_I2C2_SCL__I2C2_SCL	0x4000007f
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX7D_PAD_I2C3_SDA__I2C3_SDA	0x4000007f
-			MX7D_PAD_I2C3_SCL__I2C3_SCL	0x4000007f
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX7D_PAD_I2C4_SCL__I2C4_SCL	0x4000007f
-			MX7D_PAD_I2C4_SDA__I2C4_SDA	0x4000007f
-		>;
-	};
-
-	pinctrl_ov2680: ov2660grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x14
-		>;
-	};
-
-	pinctrl_sai1: sai1grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1f
-			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1f
-			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
-			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x30
-		>;
-	};
-
-	pinctrl_sai1_mclk: sai1mclkgrp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
-			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
-			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x79
-			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x79
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX	0x79
-			MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX	0x79
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
-			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
-			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
-			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
-			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
-			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x19
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
-			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1a
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
-			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1b
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
deleted file mode 100644
index efe2525b62fa1..0000000000000
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ /dev/null
@@ -1,1290 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2015 Freescale Semiconductor, Inc.
-// Copyright 2016 Toradex AG
-
-#include <dt-bindings/clock/imx7d-clock.h>
-#include <dt-bindings/power/imx7-power.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset/imx7-reset.h>
-#include "imx7d-pinfunc.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		serial6 = &uart7;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &ecspi3;
-		spi3 = &ecspi4;
-		usb0 = &usbotg1;
-		usb1 = &usbh;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		idle-states {
-			entry-method = "psci";
-
-			cpu_sleep_wait: cpu-sleep-wait {
-				compatible = "arm,idle-state";
-				arm,psci-suspend-param = <0x0010000>;
-				local-timer-stop;
-				entry-latency-us = <100>;
-				exit-latency-us = <50>;
-				min-residency-us = <1000>;
-			};
-		};
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <792000000>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			clocks = <&clks IMX7D_CLK_ARM>;
-			cpu-idle-states = <&cpu_sleep_wait>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-			nvmem-cells = <&fuse_grade>;
-			nvmem-cell-names = "speed_grade";
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-792000000 {
-			opp-hz = /bits/ 64 <792000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <150000>;
-			opp-supported-hw = <0xf>, <0xf>;
-		};
-	};
-
-	ckil: clock-cki {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "ckil";
-	};
-
-	osc: clock-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc";
-	};
-
-	usbphynop1: usbphynop1 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX7D_USB_PHY1_CLK>;
-		clock-names = "main_clk";
-		#phy-cells = <0>;
-	};
-
-	usbphynop3: usbphynop3 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
-		clock-names = "main_clk";
-		power-domains = <&pgc_hsic_phy>;
-		#phy-cells = <0>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupt-parent = <&gpc>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>;
-	};
-
-	replicator {
-		/*
-		 * non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell"
-		 */
-		compatible = "arm,coresight-static-replicator";
-
-		out-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-				/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&etr_in_port>;
-				};
-			};
-		};
-
-		in-ports {
-			port {
-				replicator_in_port0: endpoint {
-					remote-endpoint = <&etf_out_port>;
-				};
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		arm,cpu-registers-not-fw-configured;
-		interrupt-parent = <&intc>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gpc>;
-		ranges;
-
-		funnel@30041000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x30041000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			ca_funnel_in_ports: in-ports {
-				port {
-					ca_funnel_in_port0: endpoint {
-						remote-endpoint = <&etm0_out_port>;
-					};
-				};
-
-				/* the other input ports are not connect to anything */
-			};
-
-			out-ports {
-				port {
-					ca_funnel_out_port0: endpoint {
-						remote-endpoint = <&hugo_funnel_in_port0>;
-					};
-				};
-
-			};
-		};
-
-		etm@3007c000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x3007c000 0x1000>;
-			cpu = <&cpu0>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				port {
-					etm0_out_port: endpoint {
-						remote-endpoint = <&ca_funnel_in_port0>;
-					};
-				};
-			};
-		};
-
-		funnel@30083000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x30083000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					hugo_funnel_in_port0: endpoint {
-						remote-endpoint = <&ca_funnel_out_port0>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					hugo_funnel_in_port1: endpoint {
-						/* M4 input */
-					};
-				};
-				/* the other input ports are not connect to anything */
-			};
-
-			out-ports {
-				port {
-					hugo_funnel_out_port0: endpoint {
-						remote-endpoint = <&etf_in_port>;
-					};
-				};
-			};
-		};
-
-		etf@30084000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x30084000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				port {
-					etf_in_port: endpoint {
-						remote-endpoint = <&hugo_funnel_out_port0>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					etf_out_port: endpoint {
-						remote-endpoint = <&replicator_in_port0>;
-					};
-				};
-			};
-		};
-
-		etr@30086000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x30086000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				port {
-					etr_in_port: endpoint {
-						remote-endpoint = <&replicator_out_port1>;
-					};
-				};
-			};
-		};
-
-		tpiu@30087000 {
-			compatible = "arm,coresight-tpiu", "arm,primecell";
-			reg = <0x30087000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				port {
-					tpiu_in_port: endpoint {
-						remote-endpoint = <&replicator_out_port0>;
-					};
-				};
-			};
-		};
-
-		intc: interrupt-controller@31001000 {
-			compatible = "arm,cortex-a7-gic";
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupt-parent = <&intc>;
-			reg = <0x31001000 0x1000>,
-			      <0x31002000 0x2000>,
-			      <0x31004000 0x2000>,
-			      <0x31006000 0x2000>;
-		};
-
-		aips1: bus@30000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30000000 0x400000>;
-			ranges;
-
-			gpio1: gpio@30200000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30200000 0x10000>;
-				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
-					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
-			};
-
-			gpio2: gpio@30210000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30210000 0x10000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 13 32>;
-			};
-
-			gpio3: gpio@30220000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30220000 0x10000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 45 29>;
-			};
-
-			gpio4: gpio@30230000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30230000 0x10000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 74 24>;
-			};
-
-			gpio5: gpio@30240000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30240000 0x10000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 98 18>;
-			};
-
-			gpio6: gpio@30250000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30250000 0x10000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 116 23>;
-			};
-
-			gpio7: gpio@30260000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30260000 0x10000>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 139 16>;
-			};
-
-			wdog1: watchdog@30280000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x30280000 0x10000>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
-			};
-
-			wdog2: watchdog@30290000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x30290000 0x10000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			wdog3: watchdog@302a0000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x302a0000 0x10000>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			wdog4: watchdog@302b0000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x302b0000 0x10000>;
-				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			iomuxc_lpsr: pinctrl@302c0000 {
-				compatible = "fsl,imx7d-iomuxc-lpsr";
-				reg = <0x302c0000 0x10000>;
-				fsl,input-sel = <&iomuxc>;
-			};
-
-			gpt1: timer@302d0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302d0000 0x10000>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
-					 <&clks IMX7D_GPT1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt2: timer@302e0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302e0000 0x10000>;
-				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
-					 <&clks IMX7D_GPT2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt3: timer@302f0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302f0000 0x10000>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
-					 <&clks IMX7D_GPT3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt4: timer@30300000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x30300000 0x10000>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
-					 <&clks IMX7D_GPT4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			kpp: keypad@30320000 {
-				compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
-				reg = <0x30320000 0x10000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_KPP_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			iomuxc: pinctrl@30330000 {
-				compatible = "fsl,imx7d-iomuxc";
-				reg = <0x30330000 0x10000>;
-			};
-
-			gpr: iomuxc-gpr@30340000 {
-				compatible = "fsl,imx7d-iomuxc-gpr",
-					"fsl,imx6q-iomuxc-gpr", "syscon",
-					"simple-mfd";
-				reg = <0x30340000 0x10000>;
-
-				mux: mux-controller {
-					compatible = "mmio-mux";
-					#mux-control-cells = <1>;
-					mux-reg-masks = <0x14 0x00000010>;
-				};
-
-				video_mux: csi-mux {
-					compatible = "video-mux";
-					mux-controls = <&mux 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					status = "disabled";
-
-					port@0 {
-						reg = <0>;
-					};
-
-					port@1 {
-						reg = <1>;
-
-						csi_mux_from_mipi_vc0: endpoint {
-							remote-endpoint = <&mipi_vc0_to_csi_mux>;
-						};
-					};
-
-					port@2 {
-						reg = <2>;
-
-						csi_mux_to_csi: endpoint {
-							remote-endpoint = <&csi_from_csi_mux>;
-						};
-					};
-				};
-			};
-
-			ocotp: efuse@30350000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,imx7d-ocotp", "syscon";
-				reg = <0x30350000 0x10000>;
-				clocks = <&clks IMX7D_OCOTP_CLK>;
-
-				tempmon_calib: calib@3c {
-					reg = <0x3c 0x4>;
-				};
-
-				fuse_grade: fuse-grade@10 {
-					reg = <0x10 0x4>;
-				};
-			};
-
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
-					"syscon", "simple-mfd";
-				reg = <0x30360000 0x10000>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-
-				reg_1p0d: regulator-vdd1p0d {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p0d";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1200000>;
-					anatop-reg-offset = <0x210>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <8>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1200000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_1p2: regulator-vdd1p2 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p2";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1300000>;
-					anatop-reg-offset = <0x220>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0x14>;
-					anatop-min-voltage = <1100000>;
-					anatop-max-voltage = <1300000>;
-					anatop-enable-bit = <0>;
-				};
-
-				tempmon: tempmon {
-					compatible = "fsl,imx7d-tempmon";
-					interrupt-parent = <&gpc>;
-					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-					fsl,tempmon = <&anatop>;
-					nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
-					nvmem-cell-names = "calib", "temp_grade";
-					clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
-				};
-			};
-
-			snvs: snvs@30370000 {
-				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-				reg = <0x30370000 0x10000>;
-
-				snvs_rtc: snvs-rtc-lp {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap = <&snvs>;
-					offset = <0x34>;
-					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_SNVS_CLK>;
-					clock-names = "snvs-rtc";
-				};
-
-				snvs_pwrkey: snvs-powerkey {
-					compatible = "fsl,sec-v4.0-pwrkey";
-					regmap = <&snvs>;
-					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_SNVS_CLK>;
-					clock-names = "snvs-pwrkey";
-					linux,keycode = <KEY_POWER>;
-					wakeup-source;
-					status = "disabled";
-				};
-			};
-
-			clks: clock-controller@30380000 {
-				compatible = "fsl,imx7d-ccm";
-				reg = <0x30380000 0x10000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-				clocks = <&ckil>, <&osc>;
-				clock-names = "ckil", "osc";
-			};
-
-			src: reset-controller@30390000 {
-				compatible = "fsl,imx7d-src", "syscon";
-				reg = <0x30390000 0x10000>;
-				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
-			};
-
-			gpc: gpc@303a0000 {
-				compatible = "fsl,imx7d-gpc";
-				reg = <0x303a0000 0x10000>;
-				interrupt-controller;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <3>;
-				interrupt-parent = <&intc>;
-				#power-domain-cells = <1>;
-
-				pgc {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pgc_mipi_phy: power-domain@0 {
-						#power-domain-cells = <0>;
-						reg = <0>;
-						power-supply = <&reg_1p0d>;
-					};
-
-					pgc_pcie_phy: power-domain@1 {
-						#power-domain-cells = <0>;
-						reg = <1>;
-						power-supply = <&reg_1p0d>;
-					};
-
-					pgc_hsic_phy: power-domain@2 {
-						#power-domain-cells = <0>;
-						reg = <2>;
-						power-supply = <&reg_1p2>;
-					};
-				};
-			};
-		};
-
-		aips2: bus@30400000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30400000 0x400000>;
-			ranges;
-
-			adc1: adc@30610000 {
-				compatible = "fsl,imx7d-adc";
-				reg = <0x30610000 0x10000>;
-				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-				clock-names = "adc";
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-
-			adc2: adc@30620000 {
-				compatible = "fsl,imx7d-adc";
-				reg = <0x30620000 0x10000>;
-				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-				clock-names = "adc";
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-
-			ecspi4: spi@30630000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30630000 0x10000>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
-					<&clks IMX7D_ECSPI4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			ftm1: pwm@30640000 {
-				compatible = "fsl,vf610-ftm-pwm";
-				reg = <0x30640000 0x10000>;
-				#pwm-cells = <3>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "ftm_sys", "ftm_ext",
-				"ftm_fix", "ftm_cnt_clk_en";
-				clocks = <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
-					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
-					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
-					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			ftm2: pwm@30650000 {
-				compatible = "fsl,vf610-ftm-pwm";
-				reg = <0x30650000 0x10000>;
-				#pwm-cells = <3>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "ftm_sys", "ftm_ext",
-				"ftm_fix", "ftm_cnt_clk_en";
-				clocks = <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
-					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
-					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
-					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			pwm1: pwm@30660000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30660000 0x10000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
-					 <&clks IMX7D_PWM1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm2: pwm@30670000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30670000 0x10000>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
-					 <&clks IMX7D_PWM2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm3: pwm@30680000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30680000 0x10000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
-					 <&clks IMX7D_PWM3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm4: pwm@30690000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30690000 0x10000>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
-					 <&clks IMX7D_PWM4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			csi: csi@30710000 {
-				compatible = "fsl,imx7-csi";
-				reg = <0x30710000 0x10000>;
-				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
-					 <&clks IMX7D_CLK_DUMMY>;
-				clock-names = "axi", "mclk", "dcic";
-				status = "disabled";
-
-				port {
-					csi_from_csi_mux: endpoint {
-						remote-endpoint = <&csi_mux_to_csi>;
-					};
-				};
-			};
-
-			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
-				reg = <0x30730000 0x10000>;
-				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
-					<&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>;
-				clock-names = "pix", "axi";
-				status = "disabled";
-			};
-
-			mipi_csi: mipi-csi@30750000 {
-				compatible = "fsl,imx7-mipi-csi2";
-				reg = <0x30750000 0x10000>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-					 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
-					 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
-				clock-names = "pclk", "wrap", "phy";
-				power-domains = <&pgc_mipi_phy>;
-				phy-supply = <&reg_1p0d>;
-				resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
-				status = "disabled";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-					};
-
-					port@1 {
-						reg = <1>;
-
-						mipi_vc0_to_csi_mux: endpoint {
-							remote-endpoint = <&csi_mux_from_mipi_vc0>;
-						};
-					};
-				};
-			};
-		};
-
-		aips3: bus@30800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30800000 0x400000>;
-			ranges;
-
-			spba-bus@30800000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x30800000 0x100000>;
-				ranges;
-
-				ecspi1: spi@30820000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-					reg = <0x30820000 0x10000>;
-					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
-						<&clks IMX7D_ECSPI1_ROOT_CLK>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi2: spi@30830000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-					reg = <0x30830000 0x10000>;
-					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
-						<&clks IMX7D_ECSPI2_ROOT_CLK>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi3: spi@30840000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-					reg = <0x30840000 0x10000>;
-					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
-						<&clks IMX7D_ECSPI3_ROOT_CLK>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart1: serial@30860000 {
-					compatible = "fsl,imx7d-uart",
-						     "fsl,imx6q-uart";
-					reg = <0x30860000 0x10000>;
-					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_UART1_ROOT_CLK>,
-						<&clks IMX7D_UART1_ROOT_CLK>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart2: serial@30890000 {
-					compatible = "fsl,imx7d-uart",
-						     "fsl,imx6q-uart";
-					reg = <0x30890000 0x10000>;
-					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_UART2_ROOT_CLK>,
-						<&clks IMX7D_UART2_ROOT_CLK>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart3: serial@30880000 {
-					compatible = "fsl,imx7d-uart",
-						     "fsl,imx6q-uart";
-					reg = <0x30880000 0x10000>;
-					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_UART3_ROOT_CLK>,
-						<&clks IMX7D_UART3_ROOT_CLK>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				sai1: sai@308a0000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
-					reg = <0x308a0000 0x10000>;
-					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_SAI1_IPG_CLK>,
-						 <&clks IMX7D_SAI1_ROOT_CLK>,
-						 <&clks IMX7D_CLK_DUMMY>,
-						 <&clks IMX7D_CLK_DUMMY>;
-					clock-names = "bus", "mclk1", "mclk2", "mclk3";
-					dma-names = "rx", "tx";
-					dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
-					status = "disabled";
-				};
-
-				sai2: sai@308b0000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
-					reg = <0x308b0000 0x10000>;
-					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_SAI2_IPG_CLK>,
-						 <&clks IMX7D_SAI2_ROOT_CLK>,
-						 <&clks IMX7D_CLK_DUMMY>,
-						 <&clks IMX7D_CLK_DUMMY>;
-					clock-names = "bus", "mclk1", "mclk2", "mclk3";
-					dma-names = "rx", "tx";
-					dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
-					status = "disabled";
-				};
-
-				sai3: sai@308c0000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
-					reg = <0x308c0000 0x10000>;
-					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_SAI3_IPG_CLK>,
-						 <&clks IMX7D_SAI3_ROOT_CLK>,
-						 <&clks IMX7D_CLK_DUMMY>,
-						 <&clks IMX7D_CLK_DUMMY>;
-					clock-names = "bus", "mclk1", "mclk2", "mclk3";
-					dma-names = "rx", "tx";
-					dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
-					status = "disabled";
-				};
-			};
-
-			crypto: crypto@30900000 {
-				compatible = "fsl,sec-v4.0";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x30900000 0x40000>;
-				ranges = <0 0x30900000 0x40000>;
-				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CAAM_CLK>,
-					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
-				clock-names = "ipg", "aclk";
-
-				sec_jr0: jr@1000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x1000 0x1000>;
-					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				sec_jr1: jr@2000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x2000 0x1000>;
-					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				sec_jr2: jr@3000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x3000 0x1000>;
-					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-
-			flexcan1: can@30a00000 {
-				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x30a00000 0x10000>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CAN1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				fsl,stop-mode = <&gpr 0x10 1>;
-				status = "disabled";
-			};
-
-			flexcan2: can@30a10000 {
-				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x30a10000 0x10000>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CAN2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				fsl,stop-mode = <&gpr 0x10 2>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@30a20000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a20000 0x10000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@30a30000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a30000 0x10000>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@30a40000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a40000 0x10000>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c4: i2c@30a50000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a50000 0x10000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			uart4: serial@30a60000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a60000 0x10000>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
-					<&clks IMX7D_UART4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart5: serial@30a70000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a70000 0x10000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
-					<&clks IMX7D_UART5_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart6: serial@30a80000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a80000 0x10000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
-					<&clks IMX7D_UART6_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart7: serial@30a90000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a90000 0x10000>;
-				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
-					<&clks IMX7D_UART7_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			mu0a: mailbox@30aa0000 {
-				compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
-				reg = <0x30aa0000 0x10000>;
-				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_MU_ROOT_CLK>;
-				#mbox-cells = <2>;
-				status = "disabled";
-			};
-
-			mu0b: mailbox@30ab0000 {
-				compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
-				reg = <0x30ab0000 0x10000>;
-				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_MU_ROOT_CLK>;
-				#mbox-cells = <2>;
-				fsl,mu-side-b;
-				status = "disabled";
-			};
-
-			usbotg1: usb@30b10000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b10000 0x200>;
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop1>;
-				fsl,usbmisc = <&usbmisc1 0>;
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbh: usb@30b30000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b30000 0x200>;
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop3>;
-				fsl,usbmisc = <&usbmisc3 0>;
-				phy_type = "hsic";
-				dr_mode = "host";
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbmisc1: usbmisc@30b10200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b10200 0x200>;
-			};
-
-			usbmisc3: usbmisc@30b30200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b30200 0x200>;
-			};
-
-			usdhc1: mmc@30b40000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b40000 0x10000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
-					<&clks IMX7D_USDHC1_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc2: mmc@30b50000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b50000 0x10000>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
-					<&clks IMX7D_USDHC2_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc3: mmc@30b60000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b60000 0x10000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
-					<&clks IMX7D_USDHC3_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			qspi: spi@30bb0000 {
-				compatible = "fsl,imx7d-qspi";
-				reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>;
-				reg-names = "QuadSPI", "QuadSPI-memory";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_QSPI_ROOT_CLK>,
-					<&clks IMX7D_QSPI_ROOT_CLK>;
-				clock-names = "qspi_en", "qspi";
-				status = "disabled";
-			};
-
-			sdma: dma-controller@30bd0000 {
-				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
-				reg = <0x30bd0000 0x10000>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-					 <&clks IMX7D_SDMA_CORE_CLK>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
-			};
-
-			fec1: ethernet@30be0000 {
-				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
-				reg = <0x30be0000 0x10000>;
-				interrupt-names = "int0", "int1", "int2", "pps";
-				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ENET1_IPG_ROOT_CLK>,
-					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
-					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
-					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "ptp",
-					"enet_clk_ref", "enet_out";
-				fsl,num-tx-queues = <3>;
-				fsl,num-rx-queues = <3>;
-				fsl,stop-mode = <&gpr 0x10 3>;
-				status = "disabled";
-			};
-		};
-
-		dma_apbh: dma-apbh@33000000 {
-			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
-			reg = <0x33000000 0x2000>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			dma-channels = <4>;
-			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
-		};
-
-		gpmi: nand-controller@33002000{
-			compatible = "fsl,imx7d-gpmi-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
-			reg-names = "gpmi-nand", "bch";
-			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "bch";
-			clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
-				<&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
-			clock-names = "gpmi_io", "gpmi_bch_apb";
-			dmas = <&dma_apbh 0>;
-			dma-names = "rx-tx";
-			status = "disabled";
-			assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
-			assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx7ulp-com.dts b/arch/arm/boot/dts/imx7ulp-com.dts
deleted file mode 100644
index d76fea3b35c68..0000000000000
--- a/arch/arm/boot/dts/imx7ulp-com.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2019 NXP
-
-/dts-v1/;
-
-#include "imx7ulp.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Embedded Artists i.MX7ULP COM";
-	compatible = "ea,imx7ulp-com", "fsl,imx7ulp";
-
-	chosen {
-		stdout-path = &lpuart4;
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x4000000>;
-	};
-};
-
-&lpuart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart4>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1_id>;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usdhc0 {
-	assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>;
-	assigned-clock-parents = <&scg1 IMX7ULP_CLK_APLL_PFD1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc0>;
-	non-removable;
-	bus-width = <8>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc1 {
-	pinctrl_lpuart4: lpuart4grp {
-		fsl,pins = <
-			IMX7ULP_PAD_PTC3__LPUART4_RX	0x3
-			IMX7ULP_PAD_PTC2__LPUART4_TX	0x3
-		>;
-	};
-
-	pinctrl_usbotg1_id: otg1idgrp {
-		fsl,pins = <
-			IMX7ULP_PAD_PTC13__USB0_ID	0x10003
-		>;
-	};
-
-	pinctrl_usdhc0: usdhc0grp {
-		fsl,pins = <
-			IMX7ULP_PAD_PTD1__SDHC0_CMD	0x43
-			IMX7ULP_PAD_PTD2__SDHC0_CLK	0x10042
-			IMX7ULP_PAD_PTD3__SDHC0_D7	0x43
-			IMX7ULP_PAD_PTD4__SDHC0_D6	0x43
-			IMX7ULP_PAD_PTD5__SDHC0_D5	0x43
-			IMX7ULP_PAD_PTD6__SDHC0_D4	0x43
-			IMX7ULP_PAD_PTD7__SDHC0_D3	0x43
-			IMX7ULP_PAD_PTD8__SDHC0_D2	0x43
-			IMX7ULP_PAD_PTD9__SDHC0_D1	0x43
-			IMX7ULP_PAD_PTD10__SDHC0_D0	0x43
-			IMX7ULP_PAD_PTD11__SDHC0_DQS	0x42
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts
deleted file mode 100644
index eff51e113db4f..0000000000000
--- a/arch/arm/boot/dts/imx7ulp-evk.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2017-2018 NXP
- *   Dong Aisheng <aisheng.dong@nxp.com>
- */
-
-/dts-v1/;
-
-#include "imx7ulp.dtsi"
-
-/ {
-	model = "NXP i.MX7ULP EVK";
-	compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp";
-
-	chosen {
-		stdout-path = &lpuart4;
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&tpm4 1 50000 0>;
-		brightness-levels = <0 20 25 30 35 40 100>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio_ptc 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vsd_3v3: regulator-vsd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VSD_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usdhc0_rst>;
-		gpio = <&gpio_ptd 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&lpuart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart4>;
-	status = "okay";
-};
-
-&tpm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0>;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1_id>;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc0 {
-	assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>;
-	assigned-clock-parents = <&scg1 IMX7ULP_CLK_APLL_PFD1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc0>;
-	cd-gpios = <&gpio_ptc 10 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_vsd_3v3>;
-	status = "okay";
-};
-
-&iomuxc1 {
-	pinctrl_lpuart4: lpuart4grp {
-		fsl,pins = <
-			IMX7ULP_PAD_PTC3__LPUART4_RX	0x3
-			IMX7ULP_PAD_PTC2__LPUART4_TX	0x3
-		>;
-		bias-pull-up;
-	};
-
-	pinctrl_pwm0: pwm0grp {
-		fsl,pins = <
-			IMX7ULP_PAD_PTF2__TPM4_CH1	0x2
-		>;
-	};
-
-	pinctrl_usbotg1_vbus: otg1vbusgrp {
-		fsl,pins = <
-			IMX7ULP_PAD_PTC0__PTC0		0x20000
-		>;
-	};
-
-	pinctrl_usbotg1_id: otg1idgrp {
-		fsl,pins = <
-			IMX7ULP_PAD_PTC13__USB0_ID	0x10003
-		>;
-	};
-
-	pinctrl_usdhc0: usdhc0grp {
-		fsl,pins = <
-			IMX7ULP_PAD_PTD1__SDHC0_CMD	0x43
-			IMX7ULP_PAD_PTD2__SDHC0_CLK	0x40
-			IMX7ULP_PAD_PTD7__SDHC0_D3	0x43
-			IMX7ULP_PAD_PTD8__SDHC0_D2	0x43
-			IMX7ULP_PAD_PTD9__SDHC0_D1	0x43
-			IMX7ULP_PAD_PTD10__SDHC0_D0	0x43
-			IMX7ULP_PAD_PTC10__PTC10	0x3	/* CD */
-		>;
-	};
-
-	pinctrl_usdhc0_rst: usdhc0-gpio-rst-grp {
-		fsl,pins = <
-			IMX7ULP_PAD_PTD0__PTD0		0x3
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7ulp-pinfunc.h b/arch/arm/boot/dts/imx7ulp-pinfunc.h
deleted file mode 100644
index c0148d79b62da..0000000000000
--- a/arch/arm/boot/dts/imx7ulp-pinfunc.h
+++ /dev/null
@@ -1,478 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2017 NXP
- */
-
-#ifndef __DTS_IMX7ULP_PINFUNC_H
-#define __DTS_IMX7ULP_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_conf_reg input_reg mux_mode input_val>
- */
-
-#define IMX7ULP_PAD_PTC0__PTC0                                       0x0000 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC0__TRACE_D15                                  0x0000 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC0__LPUART4_CTS_B                              0x0000 0x0244 0x4 0x1
-#define IMX7ULP_PAD_PTC0__LPI2C4_SCL                                 0x0000 0x0278 0x5 0x1
-#define IMX7ULP_PAD_PTC0__TPM4_CLKIN                                 0x0000 0x0298 0x6 0x1
-#define IMX7ULP_PAD_PTC0__FB_AD0                                     0x0000 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC1__PTC1                                       0x0004 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC1__TRACE_D14                                  0x0004 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC1__LPUART4_RTS_B                              0x0004 0x0000 0x4 0x0
-#define IMX7ULP_PAD_PTC1__LPI2C4_SDA                                 0x0004 0x027c 0x5 0x1
-#define IMX7ULP_PAD_PTC1__TPM4_CH0                                   0x0004 0x0280 0x6 0x1
-#define IMX7ULP_PAD_PTC1__FB_AD1                                     0x0004 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC2__PTC2                                       0x0008 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC2__TRACE_D13                                  0x0008 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC2__LPUART4_TX                                 0x0008 0x024c 0x4 0x1
-#define IMX7ULP_PAD_PTC2__LPI2C4_HREQ                                0x0008 0x0274 0x5 0x1
-#define IMX7ULP_PAD_PTC2__TPM4_CH1                                   0x0008 0x0284 0x6 0x1
-#define IMX7ULP_PAD_PTC2__FB_AD2                                     0x0008 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC3__PTC3                                       0x000c 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC3__TRACE_D12                                  0x000c 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC3__LPUART4_RX                                 0x000c 0x0248 0x4 0x1
-#define IMX7ULP_PAD_PTC3__TPM4_CH2                                   0x000c 0x0288 0x6 0x1
-#define IMX7ULP_PAD_PTC3__FB_AD3                                     0x000c 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC4__PTC4                                       0x0010 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC4__TRACE_D11                                  0x0010 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC4__FXIO1_D0                                   0x0010 0x0204 0x2 0x1
-#define IMX7ULP_PAD_PTC4__LPSPI2_PCS1                                0x0010 0x02a0 0x3 0x1
-#define IMX7ULP_PAD_PTC4__LPUART5_CTS_B                              0x0010 0x0250 0x4 0x1
-#define IMX7ULP_PAD_PTC4__LPI2C5_SCL                                 0x0010 0x02bc 0x5 0x1
-#define IMX7ULP_PAD_PTC4__TPM4_CH3                                   0x0010 0x028c 0x6 0x1
-#define IMX7ULP_PAD_PTC4__FB_AD4                                     0x0010 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC5__PTC5                                       0x0014 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC5__TRACE_D10                                  0x0014 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC5__FXIO1_D1                                   0x0014 0x0208 0x2 0x1
-#define IMX7ULP_PAD_PTC5__LPSPI2_PCS2                                0x0014 0x02a4 0x3 0x1
-#define IMX7ULP_PAD_PTC5__LPUART5_RTS_B                              0x0014 0x0000 0x4 0x0
-#define IMX7ULP_PAD_PTC5__LPI2C5_SDA                                 0x0014 0x02c0 0x5 0x1
-#define IMX7ULP_PAD_PTC5__TPM4_CH4                                   0x0014 0x0290 0x6 0x1
-#define IMX7ULP_PAD_PTC5__FB_AD5                                     0x0014 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC6__PTC6                                       0x0018 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC6__TRACE_D9                                   0x0018 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC6__FXIO1_D2                                   0x0018 0x020c 0x2 0x1
-#define IMX7ULP_PAD_PTC6__LPSPI2_PCS3                                0x0018 0x02a8 0x3 0x1
-#define IMX7ULP_PAD_PTC6__LPUART5_TX                                 0x0018 0x0258 0x4 0x1
-#define IMX7ULP_PAD_PTC6__LPI2C5_HREQ                                0x0018 0x02b8 0x5 0x1
-#define IMX7ULP_PAD_PTC6__TPM4_CH5                                   0x0018 0x0294 0x6 0x1
-#define IMX7ULP_PAD_PTC6__FB_AD6                                     0x0018 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC7__PTC7                                       0x001c 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC7__TRACE_D8                                   0x001c 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC7__FXIO1_D3                                   0x001c 0x0210 0x2 0x1
-#define IMX7ULP_PAD_PTC7__LPUART5_RX                                 0x001c 0x0254 0x4 0x1
-#define IMX7ULP_PAD_PTC7__TPM5_CH1                                   0x001c 0x02c8 0x6 0x1
-#define IMX7ULP_PAD_PTC7__FB_AD7                                     0x001c 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC8__PTC8                                       0x0020 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC8__TRACE_D7                                   0x0020 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC8__FXIO1_D4                                   0x0020 0x0214 0x2 0x1
-#define IMX7ULP_PAD_PTC8__LPSPI2_SIN                                 0x0020 0x02b0 0x3 0x1
-#define IMX7ULP_PAD_PTC8__LPUART6_CTS_B                              0x0020 0x025c 0x4 0x1
-#define IMX7ULP_PAD_PTC8__LPI2C6_SCL                                 0x0020 0x02fc 0x5 0x1
-#define IMX7ULP_PAD_PTC8__TPM5_CLKIN                                 0x0020 0x02cc 0x6 0x1
-#define IMX7ULP_PAD_PTC8__FB_AD8                                     0x0020 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC9__PTC9                                       0x0024 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC9__TRACE_D6                                   0x0024 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC9__FXIO1_D5                                   0x0024 0x0218 0x2 0x1
-#define IMX7ULP_PAD_PTC9__LPSPI2_SOUT                                0x0024 0x02b4 0x3 0x1
-#define IMX7ULP_PAD_PTC9__LPUART6_RTS_B                              0x0024 0x0000 0x4 0x0
-#define IMX7ULP_PAD_PTC9__LPI2C6_SDA                                 0x0024 0x0300 0x5 0x1
-#define IMX7ULP_PAD_PTC9__TPM5_CH0                                   0x0024 0x02c4 0x6 0x1
-#define IMX7ULP_PAD_PTC9__FB_AD9                                     0x0024 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC10__PTC10                                     0x0028 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC10__TRACE_D5                                  0x0028 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC10__FXIO1_D6                                  0x0028 0x021c 0x2 0x1
-#define IMX7ULP_PAD_PTC10__LPSPI2_SCK                                0x0028 0x02ac 0x3 0x1
-#define IMX7ULP_PAD_PTC10__LPUART6_TX                                0x0028 0x0264 0x4 0x1
-#define IMX7ULP_PAD_PTC10__LPI2C6_HREQ                               0x0028 0x02f8 0x5 0x1
-#define IMX7ULP_PAD_PTC10__TPM7_CH3                                  0x0028 0x02e8 0x6 0x1
-#define IMX7ULP_PAD_PTC10__FB_AD10                                   0x0028 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC11__PTC11                                     0x002c 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC11__TRACE_D4                                  0x002c 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC11__FXIO1_D7                                  0x002c 0x0220 0x2 0x1
-#define IMX7ULP_PAD_PTC11__LPSPI2_PCS0                               0x002c 0x029c 0x3 0x1
-#define IMX7ULP_PAD_PTC11__LPUART6_RX                                0x002c 0x0260 0x4 0x1
-#define IMX7ULP_PAD_PTC11__TPM7_CH4                                  0x002c 0x02ec 0x6 0x1
-#define IMX7ULP_PAD_PTC11__FB_AD11                                   0x002c 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC12__PTC12                                     0x0030 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC12__TRACE_D3                                  0x0030 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC12__FXIO1_D8                                  0x0030 0x0224 0x2 0x1
-#define IMX7ULP_PAD_PTC12__LPSPI3_PCS1                               0x0030 0x0314 0x3 0x1
-#define IMX7ULP_PAD_PTC12__LPUART7_CTS_B                             0x0030 0x0268 0x4 0x1
-#define IMX7ULP_PAD_PTC12__LPI2C7_SCL                                0x0030 0x0308 0x5 0x1
-#define IMX7ULP_PAD_PTC12__TPM7_CH5                                  0x0030 0x02f0 0x6 0x1
-#define IMX7ULP_PAD_PTC12__FB_AD12                                   0x0030 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC13__PTC13                                     0x0034 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC13__TRACE_D2                                  0x0034 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC13__FXIO1_D9                                  0x0034 0x0228 0x2 0x1
-#define IMX7ULP_PAD_PTC13__LPSPI3_PCS2                               0x0034 0x0318 0x3 0x1
-#define IMX7ULP_PAD_PTC13__LPUART7_RTS_B                             0x0034 0x0000 0x4 0x0
-#define IMX7ULP_PAD_PTC13__LPI2C7_SDA                                0x0034 0x030c 0x5 0x1
-#define IMX7ULP_PAD_PTC13__TPM7_CLKIN                                0x0034 0x02f4 0x6 0x1
-#define IMX7ULP_PAD_PTC13__FB_AD13                                   0x0034 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC13__USB0_ID                                   0x0034 0x0338 0xb 0x1
-#define IMX7ULP_PAD_PTC14__PTC14                                     0x0038 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC14__TRACE_D1                                  0x0038 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC14__FXIO1_D10                                 0x0038 0x022c 0x2 0x1
-#define IMX7ULP_PAD_PTC14__LPSPI3_PCS3                               0x0038 0x031c 0x3 0x1
-#define IMX7ULP_PAD_PTC14__LPUART7_TX                                0x0038 0x0270 0x4 0x1
-#define IMX7ULP_PAD_PTC14__LPI2C7_HREQ                               0x0038 0x0304 0x5 0x1
-#define IMX7ULP_PAD_PTC14__TPM7_CH0                                  0x0038 0x02dc 0x6 0x1
-#define IMX7ULP_PAD_PTC14__FB_AD14                                   0x0038 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC15__PTC15                                     0x003c 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC15__TRACE_D0                                  0x003c 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC15__FXIO1_D11                                 0x003c 0x0230 0x2 0x1
-#define IMX7ULP_PAD_PTC15__LPUART7_RX                                0x003c 0x026c 0x4 0x1
-#define IMX7ULP_PAD_PTC15__TPM7_CH1                                  0x003c 0x02e0 0x6 0x1
-#define IMX7ULP_PAD_PTC15__FB_AD15                                   0x003c 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC16__PTC16                                     0x0040 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC16__TRACE_CLKOUT                              0x0040 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTC16__FXIO1_D12                                 0x0040 0x0234 0x2 0x1
-#define IMX7ULP_PAD_PTC16__LPSPI3_SIN                                0x0040 0x0324 0x3 0x1
-#define IMX7ULP_PAD_PTC16__TPM7_CH2                                  0x0040 0x02e4 0x6 0x1
-#define IMX7ULP_PAD_PTC16__FB_ALE_FB_CS1_B_FB_TS_B                   0x0040 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC16__USB1_OC2                                  0x0040 0x0334 0xb 0x1
-#define IMX7ULP_PAD_PTC17__PTC17                                     0x0044 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC17__FXIO1_D13                                 0x0044 0x0238 0x2 0x1
-#define IMX7ULP_PAD_PTC17__LPSPI3_SOUT                               0x0044 0x0328 0x3 0x1
-#define IMX7ULP_PAD_PTC17__TPM6_CLKIN                                0x0044 0x02d8 0x6 0x1
-#define IMX7ULP_PAD_PTC17__FB_CS0_B                                  0x0044 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC18__PTC18                                     0x0048 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC18__FXIO1_D14                                 0x0048 0x023c 0x2 0x1
-#define IMX7ULP_PAD_PTC18__LPSPI3_SCK                                0x0048 0x0320 0x3 0x1
-#define IMX7ULP_PAD_PTC18__TPM6_CH0                                  0x0048 0x02d0 0x6 0x1
-#define IMX7ULP_PAD_PTC18__FB_OE_B                                   0x0048 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC18__USB0_ID                                   0x0048 0x0338 0xb 0x2
-#define IMX7ULP_PAD_PTC18__VIU_DE                                    0x0048 0x033c 0xc 0x1
-#define IMX7ULP_PAD_PTC19__PTC19                                     0x004c 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTC19__FXIO1_D15                                 0x004c 0x0240 0x2 0x1
-#define IMX7ULP_PAD_PTC19__LPSPI3_PCS0                               0x004c 0x0310 0x3 0x1
-#define IMX7ULP_PAD_PTC19__TPM6_CH1                                  0x004c 0x02d4 0x6 0x1
-#define IMX7ULP_PAD_PTC19__FB_A16                                    0x004c 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTC19__USB0_ID                                   0x004c 0x0338 0xa 0x3
-#define IMX7ULP_PAD_PTC19__USB1_PWR2                                 0x004c 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTC19__VIU_DE                                    0x004c 0x033c 0xc 0x3
-#define IMX7ULP_PAD_PTD0__PTD0                                       0x0080 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTD0__SDHC0_RESET_B                              0x0080 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTD1__PTD1                                       0x0084 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTD1__SDHC0_CMD                                  0x0084 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTD2__PTD2                                       0x0088 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTD2__SDHC0_CLK                                  0x0088 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTD3__PTD3                                       0x008c 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTD3__SDHC0_D7                                   0x008c 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTD4__PTD4                                       0x0090 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTD4__SDHC0_D6                                   0x0090 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTD5__PTD5                                       0x0094 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTD5__SDHC0_D5                                   0x0094 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTD6__PTD6                                       0x0098 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTD6__SDHC0_D4                                   0x0098 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTD7__PTD7                                       0x009c 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTD7__SDHC0_D3                                   0x009c 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTD8__PTD8                                       0x00a0 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTD8__TPM4_CLKIN                                 0x00a0 0x0298 0x6 0x2
-#define IMX7ULP_PAD_PTD8__SDHC0_D2                                   0x00a0 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTD9__PTD9                                       0x00a4 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTD9__TPM4_CH0                                   0x00a4 0x0280 0x6 0x2
-#define IMX7ULP_PAD_PTD9__SDHC0_D1                                   0x00a4 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTD10__PTD10                                     0x00a8 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTD10__TPM4_CH1                                  0x00a8 0x0284 0x6 0x2
-#define IMX7ULP_PAD_PTD10__SDHC0_D0                                  0x00a8 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTD11__PTD11                                     0x00ac 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTD11__TPM4_CH2                                  0x00ac 0x0288 0x6 0x2
-#define IMX7ULP_PAD_PTD11__SDHC0_DQS                                 0x00ac 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE0__PTE0                                       0x0100 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE0__FXIO1_D31                                  0x0100 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE0__LPSPI2_PCS1                                0x0100 0x02a0 0x3 0x2
-#define IMX7ULP_PAD_PTE0__LPUART4_CTS_B                              0x0100 0x0244 0x4 0x2
-#define IMX7ULP_PAD_PTE0__LPI2C4_SCL                                 0x0100 0x0278 0x5 0x2
-#define IMX7ULP_PAD_PTE0__SDHC1_D1                                   0x0100 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE0__FB_A25                                     0x0100 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTE1__PTE1                                       0x0104 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE1__FXIO1_D30                                  0x0104 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE1__LPSPI2_PCS2                                0x0104 0x02a4 0x3 0x2
-#define IMX7ULP_PAD_PTE1__LPUART4_RTS_B                              0x0104 0x0000 0x4 0x0
-#define IMX7ULP_PAD_PTE1__LPI2C4_SDA                                 0x0104 0x027c 0x5 0x2
-#define IMX7ULP_PAD_PTE1__SDHC1_D0                                   0x0104 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE1__FB_A26                                     0x0104 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTE2__PTE2                                       0x0108 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE2__FXIO1_D29                                  0x0108 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE2__LPSPI2_PCS3                                0x0108 0x02a8 0x3 0x2
-#define IMX7ULP_PAD_PTE2__LPUART4_TX                                 0x0108 0x024c 0x4 0x2
-#define IMX7ULP_PAD_PTE2__LPI2C4_HREQ                                0x0108 0x0274 0x5 0x2
-#define IMX7ULP_PAD_PTE2__SDHC1_CLK                                  0x0108 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE3__PTE3                                       0x010c 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE3__FXIO1_D28                                  0x010c 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE3__LPUART4_RX                                 0x010c 0x0248 0x4 0x2
-#define IMX7ULP_PAD_PTE3__TPM5_CH1                                   0x010c 0x02c8 0x6 0x2
-#define IMX7ULP_PAD_PTE3__SDHC1_CMD                                  0x010c 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE4__PTE4                                       0x0110 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE4__FXIO1_D27                                  0x0110 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE4__LPSPI2_SIN                                 0x0110 0x02b0 0x3 0x2
-#define IMX7ULP_PAD_PTE4__LPUART5_CTS_B                              0x0110 0x0250 0x4 0x2
-#define IMX7ULP_PAD_PTE4__LPI2C5_SCL                                 0x0110 0x02bc 0x5 0x2
-#define IMX7ULP_PAD_PTE4__TPM5_CLKIN                                 0x0110 0x02cc 0x6 0x2
-#define IMX7ULP_PAD_PTE4__SDHC1_D3                                   0x0110 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE5__PTE5                                       0x0114 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE5__FXIO1_D26                                  0x0114 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE5__LPSPI2_SOUT                                0x0114 0x02b4 0x3 0x2
-#define IMX7ULP_PAD_PTE5__LPUART5_RTS_B                              0x0114 0x0000 0x4 0x0
-#define IMX7ULP_PAD_PTE5__LPI2C5_SDA                                 0x0114 0x02c0 0x5 0x2
-#define IMX7ULP_PAD_PTE5__TPM5_CH0                                   0x0114 0x02c4 0x6 0x2
-#define IMX7ULP_PAD_PTE5__SDHC1_D2                                   0x0114 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE5__VIU_DE                                     0x0114 0x033c 0xc 0x2
-#define IMX7ULP_PAD_PTE6__PTE6                                       0x0118 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE6__FXIO1_D25                                  0x0118 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE6__LPSPI2_SCK                                 0x0118 0x02ac 0x3 0x2
-#define IMX7ULP_PAD_PTE6__LPUART5_TX                                 0x0118 0x0258 0x4 0x2
-#define IMX7ULP_PAD_PTE6__LPI2C5_HREQ                                0x0118 0x02b8 0x5 0x2
-#define IMX7ULP_PAD_PTE6__TPM7_CH3                                   0x0118 0x02e8 0x6 0x2
-#define IMX7ULP_PAD_PTE6__SDHC1_D4                                   0x0118 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE6__FB_A17                                     0x0118 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTE6__USB0_OC                                    0x0118 0x0330 0xb 0x1
-#define IMX7ULP_PAD_PTE7__PTE7                                       0x011c 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE7__TRACE_D7                                   0x011c 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTE7__USB0_PWR                                   0x011c 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTE7__VIU_FID                                    0x011c 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTE7__FXIO1_D24                                  0x011c 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE7__LPSPI2_PCS0                                0x011c 0x029c 0x3 0x2
-#define IMX7ULP_PAD_PTE7__LPUART5_RX                                 0x011c 0x0254 0x4 0x2
-#define IMX7ULP_PAD_PTE7__TPM7_CH4                                   0x011c 0x02ec 0x6 0x2
-#define IMX7ULP_PAD_PTE7__SDHC1_D5                                   0x011c 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE7__FB_A18                                     0x011c 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTE8__PTE8                                       0x0120 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE8__TRACE_D6                                   0x0120 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTE8__VIU_D16                                    0x0120 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTE8__FXIO1_D23                                  0x0120 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE8__LPSPI3_PCS1                                0x0120 0x0314 0x3 0x2
-#define IMX7ULP_PAD_PTE8__LPUART6_CTS_B                              0x0120 0x025c 0x4 0x2
-#define IMX7ULP_PAD_PTE8__LPI2C6_SCL                                 0x0120 0x02fc 0x5 0x2
-#define IMX7ULP_PAD_PTE8__TPM7_CH5                                   0x0120 0x02f0 0x6 0x2
-#define IMX7ULP_PAD_PTE8__SDHC1_WP                                   0x0120 0x0200 0x7 0x1
-#define IMX7ULP_PAD_PTE8__SDHC1_D6                                   0x0120 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE8__FB_CS3_B_FB_BE7_0_BLS31_24_B               0x0120 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTE9__PTE9                                       0x0124 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE9__TRACE_D5                                   0x0124 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTE9__VIU_D17                                    0x0124 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTE9__FXIO1_D22                                  0x0124 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE9__LPSPI3_PCS2                                0x0124 0x0318 0x3 0x2
-#define IMX7ULP_PAD_PTE9__LPUART6_RTS_B                              0x0124 0x0000 0x4 0x0
-#define IMX7ULP_PAD_PTE9__LPI2C6_SDA                                 0x0124 0x0300 0x5 0x2
-#define IMX7ULP_PAD_PTE9__TPM7_CLKIN                                 0x0124 0x02f4 0x6 0x2
-#define IMX7ULP_PAD_PTE9__SDHC1_CD                                   0x0124 0x032c 0x7 0x1
-#define IMX7ULP_PAD_PTE9__SDHC1_D7                                   0x0124 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE9__FB_TBST_B_FB_CS2_B_FB_BE15_8_BLS23_16_B    0x0124 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTE10__PTE10                                     0x0128 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE10__TRACE_D4                                  0x0128 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTE10__VIU_D18                                   0x0128 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTE10__FXIO1_D21                                 0x0128 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE10__LPSPI3_PCS3                               0x0128 0x031c 0x3 0x2
-#define IMX7ULP_PAD_PTE10__LPUART6_TX                                0x0128 0x0264 0x4 0x2
-#define IMX7ULP_PAD_PTE10__LPI2C6_HREQ                               0x0128 0x02f8 0x5 0x2
-#define IMX7ULP_PAD_PTE10__TPM7_CH0                                  0x0128 0x02dc 0x6 0x2
-#define IMX7ULP_PAD_PTE10__SDHC1_VS                                  0x0128 0x0000 0x7 0x0
-#define IMX7ULP_PAD_PTE10__SDHC1_DQS                                 0x0128 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE10__FB_A19                                    0x0128 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTE11__PTE11                                     0x012c 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE11__TRACE_D3                                  0x012c 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTE11__VIU_D19                                   0x012c 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTE11__FXIO1_D20                                 0x012c 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE11__LPUART6_RX                                0x012c 0x0260 0x4 0x2
-#define IMX7ULP_PAD_PTE11__TPM7_CH1                                  0x012c 0x02e0 0x6 0x2
-#define IMX7ULP_PAD_PTE11__SDHC1_RESET_B                             0x012c 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE11__FB_A20                                    0x012c 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTE12__PTE12                                     0x0130 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE12__TRACE_D2                                  0x0130 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTE12__USB1_OC2                                  0x0130 0x0334 0xb 0x2
-#define IMX7ULP_PAD_PTE12__VIU_D20                                   0x0130 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTE12__FXIO1_D19                                 0x0130 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE12__LPSPI3_SIN                                0x0130 0x0324 0x3 0x2
-#define IMX7ULP_PAD_PTE12__LPUART7_CTS_B                             0x0130 0x0268 0x4 0x2
-#define IMX7ULP_PAD_PTE12__LPI2C7_SCL                                0x0130 0x0308 0x5 0x2
-#define IMX7ULP_PAD_PTE12__TPM7_CH2                                  0x0130 0x02e4 0x6 0x2
-#define IMX7ULP_PAD_PTE12__SDHC1_WP                                  0x0130 0x0200 0x8 0x2
-#define IMX7ULP_PAD_PTE12__FB_A21                                    0x0130 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTE13__PTE13                                     0x0134 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE13__TRACE_D1                                  0x0134 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTE13__USB1_PWR2                                 0x0134 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTE13__VIU_D21                                   0x0134 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTE13__FXIO1_D18                                 0x0134 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE13__LPSPI3_SOUT                               0x0134 0x0328 0x3 0x2
-#define IMX7ULP_PAD_PTE13__LPUART7_RTS_B                             0x0134 0x0000 0x4 0x0
-#define IMX7ULP_PAD_PTE13__LPI2C7_SDA                                0x0134 0x030c 0x5 0x2
-#define IMX7ULP_PAD_PTE13__TPM6_CLKIN                                0x0134 0x02d8 0x6 0x2
-#define IMX7ULP_PAD_PTE13__SDHC1_CD                                  0x0134 0x032c 0x8 0x2
-#define IMX7ULP_PAD_PTE13__FB_A22                                    0x0134 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTE14__PTE14                                     0x0138 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE14__TRACE_D0                                  0x0138 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTE14__USB0_OC                                   0x0138 0x0330 0xb 0x2
-#define IMX7ULP_PAD_PTE14__VIU_D22                                   0x0138 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTE14__FXIO1_D17                                 0x0138 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE14__LPSPI3_SCK                                0x0138 0x0320 0x3 0x2
-#define IMX7ULP_PAD_PTE14__LPUART7_TX                                0x0138 0x0270 0x4 0x2
-#define IMX7ULP_PAD_PTE14__LPI2C7_HREQ                               0x0138 0x0304 0x5 0x2
-#define IMX7ULP_PAD_PTE14__TPM6_CH0                                  0x0138 0x02d0 0x6 0x2
-#define IMX7ULP_PAD_PTE14__SDHC1_VS                                  0x0138 0x0000 0x8 0x0
-#define IMX7ULP_PAD_PTE14__FB_A23                                    0x0138 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTE15__PTE15                                     0x013c 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTE15__TRACE_CLKOUT                              0x013c 0x0000 0xa 0x0
-#define IMX7ULP_PAD_PTE15__USB0_PWR                                  0x013c 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTE15__VIU_D23                                   0x013c 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTE15__FXIO1_D16                                 0x013c 0x0000 0x2 0x0
-#define IMX7ULP_PAD_PTE15__LPSPI3_PCS0                               0x013c 0x0310 0x3 0x2
-#define IMX7ULP_PAD_PTE15__LPUART7_RX                                0x013c 0x026c 0x4 0x2
-#define IMX7ULP_PAD_PTE15__TPM6_CH1                                  0x013c 0x02d4 0x6 0x2
-#define IMX7ULP_PAD_PTE15__FB_A24                                    0x013c 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF0__PTF0                                       0x0180 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF0__VIU_DE                                     0x0180 0x033c 0xc 0x0
-#define IMX7ULP_PAD_PTF0__LPUART4_CTS_B                              0x0180 0x0244 0x4 0x3
-#define IMX7ULP_PAD_PTF0__LPI2C4_SCL                                 0x0180 0x0278 0x5 0x3
-#define IMX7ULP_PAD_PTF0__TPM4_CLKIN                                 0x0180 0x0298 0x6 0x3
-#define IMX7ULP_PAD_PTF0__FB_RW_B                                    0x0180 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF1__PTF1                                       0x0184 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF1__VIU_HSYNC                                  0x0184 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF1__LPUART4_RTS_B                              0x0184 0x0000 0x4 0x0
-#define IMX7ULP_PAD_PTF1__LPI2C4_SDA                                 0x0184 0x027c 0x5 0x3
-#define IMX7ULP_PAD_PTF1__TPM4_CH0                                   0x0184 0x0280 0x6 0x3
-#define IMX7ULP_PAD_PTF1__CLKOUT                                     0x0184 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF2__PTF2                                       0x0188 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF2__VIU_VSYNC                                  0x0188 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF2__LPUART4_TX                                 0x0188 0x024c 0x4 0x3
-#define IMX7ULP_PAD_PTF2__LPI2C4_HREQ                                0x0188 0x0274 0x5 0x3
-#define IMX7ULP_PAD_PTF2__TPM4_CH1                                   0x0188 0x0284 0x6 0x3
-#define IMX7ULP_PAD_PTF2__FB_TSIZ1_FB_CS5_B_FB_BE23_16_BLS15_8_B     0x0188 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF3__PTF3                                       0x018c 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF3__VIU_PCLK                                   0x018c 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF3__LPUART4_RX                                 0x018c 0x0248 0x4 0x3
-#define IMX7ULP_PAD_PTF3__TPM4_CH2                                   0x018c 0x0288 0x6 0x3
-#define IMX7ULP_PAD_PTF3__FB_AD16                                    0x018c 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF4__PTF4                                       0x0190 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF4__VIU_D0                                     0x0190 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF4__FXIO1_D0                                   0x0190 0x0204 0x2 0x2
-#define IMX7ULP_PAD_PTF4__LPSPI2_PCS1                                0x0190 0x02a0 0x3 0x3
-#define IMX7ULP_PAD_PTF4__LPUART5_CTS_B                              0x0190 0x0250 0x4 0x3
-#define IMX7ULP_PAD_PTF4__LPI2C5_SCL                                 0x0190 0x02bc 0x5 0x3
-#define IMX7ULP_PAD_PTF4__TPM4_CH3                                   0x0190 0x028c 0x6 0x2
-#define IMX7ULP_PAD_PTF4__FB_AD17                                    0x0190 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF5__PTF5                                       0x0194 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF5__VIU_D1                                     0x0194 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF5__FXIO1_D1                                   0x0194 0x0208 0x2 0x2
-#define IMX7ULP_PAD_PTF5__LPSPI2_PCS2                                0x0194 0x02a4 0x3 0x3
-#define IMX7ULP_PAD_PTF5__LPUART5_RTS_B                              0x0194 0x0000 0x4 0x0
-#define IMX7ULP_PAD_PTF5__LPI2C5_SDA                                 0x0194 0x02c0 0x5 0x3
-#define IMX7ULP_PAD_PTF5__TPM4_CH4                                   0x0194 0x0290 0x6 0x2
-#define IMX7ULP_PAD_PTF5__FB_AD18                                    0x0194 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF6__PTF6                                       0x0198 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF6__VIU_D2                                     0x0198 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF6__FXIO1_D2                                   0x0198 0x020c 0x2 0x2
-#define IMX7ULP_PAD_PTF6__LPSPI2_PCS3                                0x0198 0x02a8 0x3 0x3
-#define IMX7ULP_PAD_PTF6__LPUART5_TX                                 0x0198 0x0258 0x4 0x3
-#define IMX7ULP_PAD_PTF6__LPI2C5_HREQ                                0x0198 0x02b8 0x5 0x3
-#define IMX7ULP_PAD_PTF6__TPM4_CH5                                   0x0198 0x0294 0x6 0x2
-#define IMX7ULP_PAD_PTF6__FB_AD19                                    0x0198 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF7__PTF7                                       0x019c 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF7__VIU_D3                                     0x019c 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF7__FXIO1_D3                                   0x019c 0x0210 0x2 0x2
-#define IMX7ULP_PAD_PTF7__LPUART5_RX                                 0x019c 0x0254 0x4 0x3
-#define IMX7ULP_PAD_PTF7__TPM5_CH1                                   0x019c 0x02c8 0x6 0x3
-#define IMX7ULP_PAD_PTF7__FB_AD20                                    0x019c 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF8__PTF8                                       0x01a0 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF8__USB1_ULPI_CLK                              0x01a0 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTF8__VIU_D4                                     0x01a0 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF8__FXIO1_D4                                   0x01a0 0x0214 0x2 0x2
-#define IMX7ULP_PAD_PTF8__LPSPI2_SIN                                 0x01a0 0x02b0 0x3 0x3
-#define IMX7ULP_PAD_PTF8__LPUART6_CTS_B                              0x01a0 0x025c 0x4 0x3
-#define IMX7ULP_PAD_PTF8__LPI2C6_SCL                                 0x01a0 0x02fc 0x5 0x3
-#define IMX7ULP_PAD_PTF8__TPM5_CLKIN                                 0x01a0 0x02cc 0x6 0x3
-#define IMX7ULP_PAD_PTF8__FB_AD21                                    0x01a0 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF9__PTF9                                       0x01a4 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF9__USB1_ULPI_NXT                              0x01a4 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTF9__VIU_D5                                     0x01a4 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF9__FXIO1_D5                                   0x01a4 0x0218 0x2 0x2
-#define IMX7ULP_PAD_PTF9__LPSPI2_SOUT                                0x01a4 0x02b4 0x3 0x3
-#define IMX7ULP_PAD_PTF9__LPUART6_RTS_B                              0x01a4 0x0000 0x4 0x0
-#define IMX7ULP_PAD_PTF9__LPI2C6_SDA                                 0x01a4 0x0300 0x5 0x3
-#define IMX7ULP_PAD_PTF9__TPM5_CH0                                   0x01a4 0x02c4 0x6 0x3
-#define IMX7ULP_PAD_PTF9__FB_AD22                                    0x01a4 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF10__PTF10                                     0x01a8 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF10__USB1_ULPI_STP                             0x01a8 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTF10__VIU_D6                                    0x01a8 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF10__FXIO1_D6                                  0x01a8 0x021c 0x2 0x2
-#define IMX7ULP_PAD_PTF10__LPSPI2_SCK                                0x01a8 0x02ac 0x3 0x3
-#define IMX7ULP_PAD_PTF10__LPUART6_TX                                0x01a8 0x0264 0x4 0x3
-#define IMX7ULP_PAD_PTF10__LPI2C6_HREQ                               0x01a8 0x02f8 0x5 0x3
-#define IMX7ULP_PAD_PTF10__TPM7_CH3                                  0x01a8 0x02e8 0x6 0x3
-#define IMX7ULP_PAD_PTF10__FB_AD23                                   0x01a8 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF11__PTF11                                     0x01ac 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF11__USB1_ULPI_DIR                             0x01ac 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTF11__VIU_D7                                    0x01ac 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF11__FXIO1_D7                                  0x01ac 0x0220 0x2 0x2
-#define IMX7ULP_PAD_PTF11__LPSPI2_PCS0                               0x01ac 0x029c 0x3 0x3
-#define IMX7ULP_PAD_PTF11__LPUART6_RX                                0x01ac 0x0260 0x4 0x3
-#define IMX7ULP_PAD_PTF11__TPM7_CH4                                  0x01ac 0x02ec 0x6 0x3
-#define IMX7ULP_PAD_PTF11__FB_CS4_B_FB_TSIZ0_FB_BE31_24_BLS7_0_B     0x01ac 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF12__PTF12                                     0x01b0 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF12__USB1_ULPI_DATA0                           0x01b0 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTF12__VIU_D8                                    0x01b0 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF12__FXIO1_D8                                  0x01b0 0x0224 0x2 0x2
-#define IMX7ULP_PAD_PTF12__LPSPI3_PCS1                               0x01b0 0x0314 0x3 0x3
-#define IMX7ULP_PAD_PTF12__LPUART7_CTS_B                             0x01b0 0x0268 0x4 0x3
-#define IMX7ULP_PAD_PTF12__LPI2C7_SCL                                0x01b0 0x0308 0x5 0x3
-#define IMX7ULP_PAD_PTF12__TPM7_CH5                                  0x01b0 0x02f0 0x6 0x3
-#define IMX7ULP_PAD_PTF12__FB_AD24                                   0x01b0 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF13__PTF13                                     0x01b4 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF13__USB1_ULPI_DATA1                           0x01b4 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTF13__VIU_D9                                    0x01b4 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF13__FXIO1_D9                                  0x01b4 0x0228 0x2 0x2
-#define IMX7ULP_PAD_PTF13__LPSPI3_PCS2                               0x01b4 0x0318 0x3 0x3
-#define IMX7ULP_PAD_PTF13__LPUART7_RTS_B                             0x01b4 0x0000 0x4 0x0
-#define IMX7ULP_PAD_PTF13__LPI2C7_SDA                                0x01b4 0x030c 0x5 0x3
-#define IMX7ULP_PAD_PTF13__TPM7_CLKIN                                0x01b4 0x02f4 0x6 0x3
-#define IMX7ULP_PAD_PTF13__FB_AD25                                   0x01b4 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF14__PTF14                                     0x01b8 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF14__USB1_ULPI_DATA2                           0x01b8 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTF14__VIU_D10                                   0x01b8 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF14__FXIO1_D10                                 0x01b8 0x022c 0x2 0x2
-#define IMX7ULP_PAD_PTF14__LPSPI3_PCS3                               0x01b8 0x031c 0x3 0x3
-#define IMX7ULP_PAD_PTF14__LPUART7_TX                                0x01b8 0x0270 0x4 0x3
-#define IMX7ULP_PAD_PTF14__LPI2C7_HREQ                               0x01b8 0x0304 0x5 0x3
-#define IMX7ULP_PAD_PTF14__TPM7_CH0                                  0x01b8 0x02dc 0x6 0x3
-#define IMX7ULP_PAD_PTF14__FB_AD26                                   0x01b8 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF15__PTF15                                     0x01bc 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF15__USB1_ULPI_DATA3                           0x01bc 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTF15__VIU_D11                                   0x01bc 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF15__FXIO1_D11                                 0x01bc 0x0230 0x2 0x2
-#define IMX7ULP_PAD_PTF15__LPUART7_RX                                0x01bc 0x026c 0x4 0x3
-#define IMX7ULP_PAD_PTF15__TPM7_CH1                                  0x01bc 0x02e0 0x6 0x3
-#define IMX7ULP_PAD_PTF15__FB_AD27                                   0x01bc 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF16__PTF16                                     0x01c0 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF16__USB1_ULPI_DATA4                           0x01c0 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTF16__VIU_D12                                   0x01c0 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF16__FXIO1_D12                                 0x01c0 0x0234 0x2 0x2
-#define IMX7ULP_PAD_PTF16__LPSPI3_SIN                                0x01c0 0x0324 0x3 0x3
-#define IMX7ULP_PAD_PTF16__TPM7_CH2                                  0x01c0 0x02e4 0x6 0x3
-#define IMX7ULP_PAD_PTF16__FB_AD28                                   0x01c0 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF17__PTF17                                     0x01c4 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF17__USB1_ULPI_DATA5                           0x01c4 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTF17__VIU_D13                                   0x01c4 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF17__FXIO1_D13                                 0x01c4 0x0238 0x2 0x2
-#define IMX7ULP_PAD_PTF17__LPSPI3_SOUT                               0x01c4 0x0328 0x3 0x3
-#define IMX7ULP_PAD_PTF17__TPM6_CLKIN                                0x01c4 0x02d8 0x6 0x3
-#define IMX7ULP_PAD_PTF17__FB_AD29                                   0x01c4 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF18__PTF18                                     0x01c8 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF18__USB1_ULPI_DATA6                           0x01c8 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTF18__VIU_D14                                   0x01c8 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF18__FXIO1_D14                                 0x01c8 0x023c 0x2 0x2
-#define IMX7ULP_PAD_PTF18__LPSPI3_SCK                                0x01c8 0x0320 0x3 0x3
-#define IMX7ULP_PAD_PTF18__TPM6_CH0                                  0x01c8 0x02d0 0x6 0x3
-#define IMX7ULP_PAD_PTF18__FB_AD30                                   0x01c8 0x0000 0x9 0x0
-#define IMX7ULP_PAD_PTF19__PTF19                                     0x01cc 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF19__USB1_ULPI_DATA7                           0x01cc 0x0000 0xb 0x0
-#define IMX7ULP_PAD_PTF19__VIU_D15                                   0x01cc 0x0000 0xc 0x0
-#define IMX7ULP_PAD_PTF19__FXIO1_D15                                 0x01cc 0x0240 0x2 0x2
-#define IMX7ULP_PAD_PTF19__LPSPI3_PCS0                               0x01cc 0x0310 0x3 0x3
-#define IMX7ULP_PAD_PTF19__TPM6_CH1                                  0x01cc 0x02d4 0x6 0x3
-#define IMX7ULP_PAD_PTF19__FB_AD31                                   0x01cc 0x0000 0x9 0x0
-
-#endif /* __DTS_IMX7ULP_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
deleted file mode 100644
index f91bf719d4e2f..0000000000000
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ /dev/null
@@ -1,464 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Freescale Semiconductor, Inc.
- * Copyright 2017-2018 NXP
- *   Dong Aisheng <aisheng.dong@nxp.com>
- */
-
-#include <dt-bindings/clock/imx7ulp-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "imx7ulp-pinfunc.h"
-
-/ {
-	interrupt-parent = <&intc>;
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		gpio0 = &gpio_ptc;
-		gpio1 = &gpio_ptd;
-		gpio2 = &gpio_pte;
-		gpio3 = &gpio_ptf;
-		i2c0 = &lpi2c6;
-		i2c1 = &lpi2c7;
-		mmc0 = &usdhc0;
-		mmc1 = &usdhc1;
-		serial0 = &lpuart4;
-		serial1 = &lpuart5;
-		serial2 = &lpuart6;
-		serial3 = &lpuart7;
-		usbphy0 = &usbphy1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@f00 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0xf00>;
-		};
-	};
-
-	intc: interrupt-controller@40021000 {
-		compatible = "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x40021000 0x1000>,
-		      <0x40022000 0x1000>;
-	};
-
-	rosc: clock-rosc {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "rosc";
-		#clock-cells = <0>;
-	};
-
-	sosc: clock-sosc {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "sosc";
-		#clock-cells = <0>;
-	};
-
-	sirc: clock-sirc {
-		compatible = "fixed-clock";
-		clock-frequency = <16000000>;
-		clock-output-names = "sirc";
-		#clock-cells = <0>;
-	};
-
-	firc: clock-firc {
-		compatible = "fixed-clock";
-		clock-frequency = <48000000>;
-		clock-output-names = "firc";
-		#clock-cells = <0>;
-	};
-
-	upll: clock-upll {
-		compatible = "fixed-clock";
-		clock-frequency = <480000000>;
-		clock-output-names = "upll";
-		#clock-cells = <0>;
-	};
-
-	ahbbridge0: bus@40000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x40000000 0x800000>;
-		ranges;
-
-		edma1: dma-controller@40080000 {
-			#dma-cells = <2>;
-			compatible = "fsl,imx7ulp-edma";
-			reg = <0x40080000 0x2000>,
-				<0x40210000 0x1000>;
-			dma-channels = <32>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "dma", "dmamux0";
-			clocks = <&pcc2 IMX7ULP_CLK_DMA1>,
-				 <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
-		};
-
-		crypto: crypto@40240000 {
-			compatible = "fsl,sec-v4.0";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40240000 0x10000>;
-			ranges = <0 0x40240000 0x10000>;
-			clocks = <&pcc2 IMX7ULP_CLK_CAAM>,
-				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
-			clock-names = "aclk", "ipg";
-
-			sec_jr0: jr@1000 {
-				compatible = "fsl,sec-v4.0-job-ring";
-				reg = <0x1000 0x1000>;
-				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			sec_jr1: jr@2000 {
-				compatible = "fsl,sec-v4.0-job-ring";
-				reg = <0x2000 0x1000>;
-				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		lpuart4: serial@402d0000 {
-			compatible = "fsl,imx7ulp-lpuart";
-			reg = <0x402d0000 0x1000>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc2 IMX7ULP_CLK_LPUART4>;
-			clock-names = "ipg";
-			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART4>;
-			assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
-			assigned-clock-rates = <24000000>;
-			status = "disabled";
-		};
-
-		lpuart5: serial@402e0000 {
-			compatible = "fsl,imx7ulp-lpuart";
-			reg = <0x402e0000 0x1000>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc2 IMX7ULP_CLK_LPUART5>;
-			clock-names = "ipg";
-			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART5>;
-			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
-			assigned-clock-rates = <48000000>;
-			status = "disabled";
-		};
-
-		tpm4: pwm@40250000 {
-			compatible = "fsl,imx7ulp-pwm";
-			reg = <0x40250000 0x1000>;
-			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
-			assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
-			clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		tpm5: tpm@40260000 {
-			compatible = "fsl,imx7ulp-tpm";
-			reg = <0x40260000 0x1000>;
-			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-				 <&pcc2 IMX7ULP_CLK_LPTPM5>;
-			clock-names = "ipg", "per";
-		};
-
-		usbotg1: usb@40330000 {
-			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb";
-			reg = <0x40330000 0x200>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc2 IMX7ULP_CLK_USB0>;
-			phys = <&usbphy1>;
-			fsl,usbmisc = <&usbmisc1 0>;
-			ahb-burst-config = <0x0>;
-			tx-burst-size-dword = <0x8>;
-			rx-burst-size-dword = <0x8>;
-			status = "disabled";
-		};
-
-		usbmisc1: usbmisc@40330200 {
-			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
-				     "fsl,imx6q-usbmisc";
-			#index-cells = <1>;
-			reg = <0x40330200 0x200>;
-		};
-
-		usbphy1: usb-phy@40350000 {
-			compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
-			reg = <0x40350000 0x1000>;
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
-			#phy-cells = <0>;
-		};
-
-		usdhc0: mmc@40370000 {
-			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
-			reg = <0x40370000 0x10000>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-				 <&pcc2 IMX7ULP_CLK_USDHC0>;
-			clock-names = "ipg", "ahb", "per";
-			bus-width = <4>;
-			fsl,tuning-start-tap = <20>;
-			fsl,tuning-step = <2>;
-			status = "disabled";
-		};
-
-		usdhc1: mmc@40380000 {
-			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
-			reg = <0x40380000 0x10000>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-				 <&pcc2 IMX7ULP_CLK_USDHC1>;
-			clock-names = "ipg", "ahb", "per";
-			bus-width = <4>;
-			fsl,tuning-start-tap = <20>;
-			fsl,tuning-step = <2>;
-			status = "disabled";
-		};
-
-		scg1: clock-controller@403e0000 {
-			compatible = "fsl,imx7ulp-scg1";
-			reg = <0x403e0000 0x10000>;
-			clocks = <&rosc>, <&sosc>, <&sirc>,
-				 <&firc>, <&upll>;
-			clock-names = "rosc", "sosc", "sirc",
-				      "firc", "upll";
-			#clock-cells = <1>;
-		};
-
-		wdog1: watchdog@403d0000 {
-			compatible = "fsl,imx7ulp-wdt";
-			reg = <0x403d0000 0x10000>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
-			timeout-sec = <40>;
-		};
-
-		pcc2: clock-controller@403f0000 {
-			compatible = "fsl,imx7ulp-pcc2";
-			reg = <0x403f0000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-				 <&scg1 IMX7ULP_CLK_DDR_DIV>,
-				 <&scg1 IMX7ULP_CLK_APLL_PFD2>,
-				 <&scg1 IMX7ULP_CLK_APLL_PFD1>,
-				 <&scg1 IMX7ULP_CLK_APLL_PFD0>,
-				 <&scg1 IMX7ULP_CLK_UPLL>,
-				 <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
-				 <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
-				 <&scg1 IMX7ULP_CLK_ROSC>,
-				 <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
-			clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
-				      "apll_pfd2", "apll_pfd1", "apll_pfd0",
-				      "upll", "sosc_bus_clk",
-				      "firc_bus_clk", "rosc", "spll_bus_clk";
-			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>;
-			assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
-		};
-
-		smc1: clock-controller@40410000 {
-			compatible = "fsl,imx7ulp-smc1";
-			reg = <0x40410000 0x1000>;
-			#clock-cells = <1>;
-			clocks = <&scg1 IMX7ULP_CLK_CORE_DIV>,
-				 <&scg1 IMX7ULP_CLK_HSRUN_CORE_DIV>;
-			clock-names = "divcore", "hsrun_divcore";
-		};
-
-		pcc3: clock-controller@40b30000 {
-			compatible = "fsl,imx7ulp-pcc3";
-			reg = <0x40b30000 0x10000>;
-			#clock-cells = <1>;
-			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-				 <&scg1 IMX7ULP_CLK_DDR_DIV>,
-				 <&scg1 IMX7ULP_CLK_APLL_PFD2>,
-				 <&scg1 IMX7ULP_CLK_APLL_PFD1>,
-				 <&scg1 IMX7ULP_CLK_APLL_PFD0>,
-				 <&scg1 IMX7ULP_CLK_UPLL>,
-				 <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
-				 <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
-				 <&scg1 IMX7ULP_CLK_ROSC>,
-				 <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
-			clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
-				      "apll_pfd2", "apll_pfd1", "apll_pfd0",
-				      "upll", "sosc_bus_clk",
-				      "firc_bus_clk", "rosc", "spll_bus_clk";
-		};
-	};
-
-	ahbbridge1: bus@40800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x40800000 0x800000>;
-		ranges;
-
-		lpi2c6: i2c@40a40000 {
-			compatible = "fsl,imx7ulp-lpi2c";
-			reg = <0x40a40000 0x10000>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>,
-				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
-			clock-names = "per", "ipg";
-			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
-			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
-			assigned-clock-rates = <48000000>;
-			status = "disabled";
-		};
-
-		lpi2c7: i2c@40a50000 {
-			compatible = "fsl,imx7ulp-lpi2c";
-			reg = <0x40a50000 0x10000>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>,
-				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
-			clock-names = "per", "ipg";
-			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
-			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
-			assigned-clock-rates = <48000000>;
-			status = "disabled";
-		};
-
-		lpuart6: serial@40a60000 {
-			compatible = "fsl,imx7ulp-lpuart";
-			reg = <0x40a60000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc3 IMX7ULP_CLK_LPUART6>;
-			clock-names = "ipg";
-			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART6>;
-			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
-			assigned-clock-rates = <48000000>;
-			status = "disabled";
-		};
-
-		lpuart7: serial@40a70000 {
-			compatible = "fsl,imx7ulp-lpuart";
-			reg = <0x40a70000 0x1000>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc3  IMX7ULP_CLK_LPUART7>;
-			clock-names = "ipg";
-			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART7>;
-			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
-			assigned-clock-rates = <48000000>;
-			status = "disabled";
-		};
-
-		memory-controller@40ab0000 {
-			compatible = "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc";
-			reg = <0x40ab0000 0x1000>;
-			clocks = <&pcc3 IMX7ULP_CLK_MMDC>;
-		};
-
-		iomuxc1: pinctrl@40ac0000 {
-			compatible = "fsl,imx7ulp-iomuxc1";
-			reg = <0x40ac0000 0x1000>;
-		};
-
-		gpio_ptc: gpio@40ae0000 {
-			compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
-			reg = <0x40ae0000 0x1000 0x400f0000 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
-				 <&pcc3 IMX7ULP_CLK_PCTLC>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc1 0 0 20>;
-		};
-
-		gpio_ptd: gpio@40af0000 {
-			compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
-			reg = <0x40af0000 0x1000 0x400f0040 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
-				 <&pcc3 IMX7ULP_CLK_PCTLD>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc1 0 32 12>;
-		};
-
-		gpio_pte: gpio@40b00000 {
-			compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
-			reg = <0x40b00000 0x1000 0x400f0080 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
-				 <&pcc3 IMX7ULP_CLK_PCTLE>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc1 0 64 16>;
-		};
-
-		gpio_ptf: gpio@40b10000 {
-			compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
-			reg = <0x40b10000 0x1000 0x400f00c0 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
-				 <&pcc3 IMX7ULP_CLK_PCTLF>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc1 0 96 20>;
-		};
-	};
-
-	m4aips1: bus@41080000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x41080000 0x80000>;
-		ranges;
-
-		sim: sim@410a3000 {
-			compatible = "fsl,imx7ulp-sim", "syscon";
-			reg = <0x410a3000 0x1000>;
-		};
-
-		ocotp: efuse@410a6000 {
-			compatible = "fsl,imx7ulp-ocotp", "syscon";
-			reg = <0x410a6000 0x4000>;
-			clocks = <&scg1 IMX7ULP_CLK_DUMMY>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imxrt1050-evk.dts b/arch/arm/boot/dts/imxrt1050-evk.dts
deleted file mode 100644
index 6a9c10decf521..0000000000000
--- a/arch/arm/boot/dts/imxrt1050-evk.dts
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019
- * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
- */
-
-/dts-v1/;
-#include "imxrt1050.dtsi"
-#include "imxrt1050-pinfunc.h"
-
-/ {
-	model = "NXP IMXRT1050-evk board";
-	compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
-
-	chosen {
-		stdout-path = &lpuart1;
-	};
-
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		mmc0 = &usdhc1;
-		serial0 = &lpuart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x2000000>;
-	};
-};
-
-&lpuart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart1>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl_lpuart1: lpuart1grp {
-		fsl,pins = <
-			MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD	0xf1
-			MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD	0xf1
-		>;
-	};
-
-	pinctrl_usdhc0: usdhc0grp {
-		fsl,pins = <
-			MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B		0x1B000
-			MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT	0xB069
-			MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD	0x17061
-			MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK	0x17061
-			MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3	0x17061
-			MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2	0x17061
-			MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1	0x17061
-			MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0	0x17061
-		>;
-	};
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc0>;
-	pinctrl-1 = <&pinctrl_usdhc0>;
-	pinctrl-2 = <&pinctrl_usdhc0>;
-	pinctrl-3 = <&pinctrl_usdhc0>;
-	cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imxrt1050-pinfunc.h b/arch/arm/boot/dts/imxrt1050-pinfunc.h
deleted file mode 100644
index 22c14a3262add..0000000000000
--- a/arch/arm/boot/dts/imxrt1050-pinfunc.h
+++ /dev/null
@@ -1,993 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
-/*
- * Copyright (C) 2019
- * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
- */
-
-#ifndef _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
-#define _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
-
-#define IMX_PAD_SION	0x40000000
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-
-#define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00				0x014 0x204 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A			0x014 0x204 0x494 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK				0x014 0x204 0x500 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2				0x014 0x204 0x60C 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00				0x014 0x204 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00				0x014 0x204 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01				0x018 0x208 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B			0x018 0x208 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0				0x018 0x208 0x4FC 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_01_XBAR_INOUT3				0x018 0x208 0x610 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXIO1_D01				0x018 0x208 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_01_GPIO4_IO01				0x018 0x208 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02				0x01C 0x20C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXPWM4_PWM1_A			0x01C 0x20C 0x498 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_02_LPSPI2_SDO				0x01C 0x20C 0x508 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_02_XBAR_INOUT4				0x01C 0x20C 0x614 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXIO1_D02				0x01C 0x20C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_02_GPIO4_IO02				0x01C 0x20C 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03				0x020 0x210 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXPWM4_PWM1_B			0x020 0x210 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_03_LPSPI2_SDI				0x020 0x210 0x504 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_03_XBAR_INOUT5				0x020 0x210 0x618 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXIO1_D03				0x020 0x210 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_03_GPIO4_IO03				0x020 0x210 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04				0x024 0x214 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXPWM4_PWM2_A			0x024 0x214 0x49C 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_04_SAI2_TX_DATA			0x024 0x214 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_04_XBAR_INOUT6				0x024 0x214 0x61C 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXIO1_D04				0x024 0x214 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_04_GPIO4_IO04				0x024 0x214 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05				0x028 0x218 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXPWM4_PWM2_B			0x028 0x218 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_05_SAI2_TX_SYNC			0x028 0x218 0x5C4 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_05_XBAR_INOUT7				0x028 0x218 0x620 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXIO1_D05				0x028 0x218 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_05_GPIO4_IO05				0x028 0x218 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06				0x02C 0x21C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXPWM2_PWM0_A			0x02C 0x21C 0x478 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_06_SAI2_TX_BCLK			0x02C 0x21C 0x5C0 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_06_XBAR_INOUT8				0x02C 0x21C 0x624 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXIO1_D06				0x02C 0x21C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_06_GPIO4_IO06				0x02C 0x21C 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07				0x030 0x220 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXPWM2_PWM0_B			0x030 0x220 0x488 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_07_SAI2_MCLK				0x030 0x220 0x5B0 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_07_XBAR_INOUT9				0x030 0x220 0x628 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXIO1_D07				0x030 0x220 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_07_GPIO4_IO07				0x030 0x220 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00				0x034 0x224 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXPWM2_PWM1_A			0x034 0x224 0x47C 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_08_SAI2_RX_DATA			0x034 0x224 0x5B8 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_08_XBAR_INOUT17			0x034 0x224 0x62C 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXIO1_D08				0x034 0x224 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_08_GPIO4_IO08				0x034 0x224 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00				0x038 0x228 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXPWM2_PWM1_B			0x038 0x228 0x48C 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_09_SAI2_RX_SYNC			0x038 0x228 0x5BC 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXCAN2_TX				0x038 0x228 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXIO1_D09				0x038 0x228 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_09_GPIO4_IO09				0x038 0x228 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01				0x03C 0x22C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXPWM2_PWM2_A			0x03C 0x22C 0x480 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_10_SAI2_RX_BCLK			0x03C 0x22C 0x5B4 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXCAN2_RX				0x03C 0x22C 0x450 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXIO1_D10				0x03C 0x22C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_10_GPIO4_IO10				0x03C 0x22C 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02				0x040 0x230 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXPWM2_PWM2_B			0x040 0x230 0x490 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_11_LPI2C4_SDA				0x040 0x230 0x4E8 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_11_USDHC2_RESET_B			0x040 0x230 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXIO1_D11				0x040 0x230 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_11_GPIO4_IO11				0x040 0x230 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03				0x044 0x234 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_12_XBAR_INOUT24			0x044 0x234 0x640 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_12_LPI2C4_SCL				0x044 0x234 0x4E4 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_12_USDHC2_WP				0x044 0x234 0x5D8 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_12_FLEXPWM1_PWM3_A			0x044 0x234 0x454 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_12_GPIO4_IO12				0x044 0x234 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04				0x048 0x238 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_13_XBAR_INOUT25			0x048 0x238 0x650 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_13_LPUART3_TXD				0x048 0x238 0x53C 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_13_MQS_RIGHT				0x048 0x238 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_13_FLEXPWM1_PWM3_B			0x048 0x238 0x464 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_13_GPIO4_IO13				0x048 0x238 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05				0x04C 0x23C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_14_XBAR_INOUT19			0x04C 0x23C 0x654 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_14_LPUART3_RXD				0x04C 0x23C 0x538 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_14_MQS_LEFT				0x04C 0x23C 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_14_LPSPI2_PCS1				0x04C 0x23C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_14_GPIO4_IO14				0x04C 0x23C 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06				0x050 0x240 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_15_XBAR_INOUT20			0x050 0x240 0x634 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_15_LPUART3_CTS_B			0x050 0x240 0x534 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_15_SPDIF_OUT				0x050 0x240 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_15_TMR3_TIMER0				0x050 0x240 0x57C 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_15_GPIO4_IO15				0x050 0x240 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07				0x054 0x244 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_16_XBAR_INOUT21			0x054 0x244 0x658 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_16_LPUART3_RTS_B			0x054 0x244 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_16_SPDIF_IN				0x054 0x244 0x5C8 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_16_TMR3_TIMER1				0x054 0x244 0x580 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_16_GPIO4_IO16				0x054 0x244 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08				0x058 0x248 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXPWM4_PWM3_A			0x058 0x248 0x4A0 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_17_LPUART4_CTS_B			0x058 0x248 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXCAN1_TX				0x058 0x248 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_17_TMR3_TIMER2				0x058 0x248 0x584 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_17_GPIO4_IO17				0x058 0x248 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09				0x05C 0x24C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXPWM4_PWM3_B			0x05C 0x24C 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_18_LPUART4_RTS_B			0x05C 0x24C 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXCAN1_RX				0x05C 0x24C 0x44C 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_18_TMR3_TIMER3				0x05C 0x24C 0x588 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_18_GPIO4_IO18				0x05C 0x24C 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_18_SNVS_VIO_5_CTL			0x05C 0x24C 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11				0x060 0x250 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_19_FLEXPWM2_PWM3_A			0x060 0x250 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_19_LPUART4_TXD				0x060 0x250 0x544 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_19_ENET_RX_DATA01			0x060 0x250 0x438 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_19_TMR2_TIMER0				0x060 0x250 0x56C 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_19_GPIO4_IO19				0x060 0x250 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_19_SNVS_VIO_5				0x060 0x250 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12				0x064 0x254 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_20_FLEXPWM2_PWM3_B			0x064 0x254 0x484 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_20_LPUART4_RXD				0x064 0x254 0x540 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_20_ENET_RX_DATA00			0x064 0x254 0x434 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_20_TMR2_TIMER0				0x064 0x254 0x570 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_20_GPIO4_IO20				0x064 0x254 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0				0x068 0x258 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_21_FLEXPWM3_PWM3_A			0x068 0x258 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_21_LPI2C3_SDA				0x068 0x258 0x4E0 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_21_ENET_TX_DATA01			0x068 0x258 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_21_TMR2_TIMER2				0x068 0x258 0x574 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_21_GPIO4_IO21				0x068 0x258 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1				0x06C 0x25C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_22_FLEXPWM3_PWM3_B			0x06C 0x25C 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_22_LPI2C3_SCL				0x06C 0x25C 0x4DC 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_22_ENET_TX_DATA00			0x06C 0x25C 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_22_TMR2_TIMER3				0x06C 0x25C 0x578 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_22_GPIO4_IO22				0x06C 0x25C 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10				0x070 0x260 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_23_FLEXPWM1_PWM0_A			0x070 0x260 0x458 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_23_LPUART5_TXD				0x070 0x260 0x54C 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_23_ENET_RX_EN				0x070 0x260 0x43C 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_23_GPT1_CAPTURE2			0x070 0x260 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_23_GPIO4_IO23				0x070 0x260 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS				0x074 0x264 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_24_FLEXPWM1_PWM0_B			0x074 0x264 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_24_LPUART5_RXD				0x074 0x264 0x548 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_24_ENET_TX_EN				0x074 0x264 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_24_GPT1_CAPTURE1			0x074 0x264 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_24_GPIO4_IO24				0x074 0x264 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS				0x078 0x268 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_25_FLEXPWM1_PWM1_A			0x078 0x268 0x45C 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_25_LPUART6_TXD				0x078 0x268 0x554 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_TX_CLK				0x078 0x268 0x448 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_REF_CLK			0x078 0x268 0x42C 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_25_GPIO4_IO25				0x078 0x268 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK				0x07C 0x26C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXPWM1_PWM1_B			0x07C 0x26C 0x46C 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_26_LPUART6_RXD				0x07C 0x26C 0x550 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_26_ENET_RX_ER				0x07C 0x26C 0x440 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXIO1_D12				0x07C 0x26C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_26_GPIO4_IO26				0x07C 0x26C 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE				0x080 0x270 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXPWM1_PWM2_A			0x080 0x270 0x460 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_27_LPUART5_RTS_B			0x080 0x270 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_27_LPSPI1_SCK				0x080 0x270 0x4F0 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXIO1_D13				0x080 0x270 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_27_GPIO4_IO27				0x080 0x270 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE				0x084 0x274 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXPWM1_PWM2_B			0x084 0x274 0x470 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_28_LPUART5_CTS_B			0x084 0x274 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_28_LPSPI1_SDO				0x084 0x274 0x4F8 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXIO1_D14				0x084 0x274 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_28_GPIO4_IO28				0x084 0x274 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0				0x088 0x278 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXPWM3_PWM0_A			0x088 0x278 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_29_LPUART6_RTS_B			0x088 0x278 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_29_LPSPI1_SDI				0x088 0x278 0x4F4 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXIO1_D15				0x088 0x278 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_29_GPIO4_IO29				0x088 0x278 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08				0x08C 0x27C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_30_FLEXPWM3_PWM0_B			0x08C 0x27C 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_30_LPUART6_CTS_B			0x08C 0x27C 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_30_LPSPI1_PCS0				0x08C 0x27C 0x4EC 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_30_CSI_DATA23				0x08C 0x27C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_30_GPIO4_IO30				0x08C 0x27C 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09				0x090 0x280 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_31_FLEXPWM3_PWM1_A			0x090 0x280 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_31_LPUART7_TXD				0x090 0x280 0x55C 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_31_LPSPI1_PCS1				0x090 0x280 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_31_CSI_DATA22				0x090 0x280 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_31_GPIO4_IO31				0x090 0x280 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10				0x094 0x284 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_32_FLEXPWM3_PWM1_B			0x094 0x284 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_32_LPUART7_RXD				0x094 0x284 0x558 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_32_CCM_PMIC_READY			0x094 0x284 0x3FC 0x3 0x4
-#define MXRT1050_IOMUXC_GPIO_EMC_32_CSI_DATA21				0x094 0x284 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_32_GPIO3_IO18				0x094 0x284 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11				0x098 0x288 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_33_FLEXPWM3_PWM2_A			0x098 0x288 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_33_USDHC1_RESET_B			0x098 0x288 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_33_SAI3_RX_DATA			0x098 0x288 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_33_CSI_DATA20				0x098 0x288 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_33_GPIO3_IO19				0x098 0x288 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12				0x09C 0x28C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_34_FLEXPWM3_PWM2_B			0x09C 0x28C 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_34_USDHC1_VSELECT			0x09C 0x28C 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_34_SAI3_RX_SYNC			0x09C 0x28C 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_34_CSI_DATA19				0x09C 0x28C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_34_GPIO3_IO20				0x09C 0x28C 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13				0x0A0 0x290 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_35_XBAR_INOUT18			0x0A0 0x290 0x630 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_35_GPT1_COMPARE1			0x0A0 0x290 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_35_SAI3_RX_BCLK			0x0A0 0x290 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_35_CSI_DATA18				0x0A0 0x290 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_35_GPIO3_IO21				0x0A0 0x290 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_35_USDHC1_CD_B				0x0A0 0x290 0x5D4 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14				0x0A4 0x294 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_36_XBAR_INOUT22			0x0A4 0x294 0x638 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_36_GPT1_COMPARE2			0x0A4 0x294 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_36_SAI3_TX_DATA			0x0A4 0x294 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_36_CSI_DATA17				0x0A4 0x294 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_36_GPIO3_IO22				0x0A4 0x294 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_36_USDHC1_WP				0x0A4 0x294 0x5D8 0x6 0x1
-
-#define MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15				0x0A8 0x298 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_37_XBAR_INOUT23			0x0A8 0x298 0x63C 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_37_GPT1_COMPARE3			0x0A8 0x298 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_37_SAI3_MCLK				0x0A8 0x298 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_37_CSI_DATA16				0x0A8 0x298 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_37_GPIO3_IO23				0x0A8 0x298 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_37_USDHC2_WP				0x0A8 0x298 0x608 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01				0x0AC 0x29C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_38_FLEXPWM1_PWM3_A			0x0AC 0x29C 0x454 0x1 0x2
-#define MXRT1050_IOMUXC_GPIO_EMC_38_LPUART8_TXD				0x0AC 0x29C 0x564 0x2 0x2
-#define MXRT1050_IOMUXC_GPIO_EMC_38_SAI3_TX_BCLK			0x0AC 0x29C 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_38_CSI_FIELD				0x0AC 0x29C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_38_GPIO3_IO24				0x0AC 0x29C 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_38_USDHC2_VSELECT			0x0AC 0x29C 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS				0x0B0 0x2A0 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_39_FLEXPWM1_PWM3_B			0x0B0 0x2A0 0x464 0x1 0x2
-#define MXRT1050_IOMUXC_GPIO_EMC_39_LPUART8_RXD				0x0B0 0x2A0 0x560 0x2 0x2
-#define MXRT1050_IOMUXC_GPIO_EMC_39_SAI3_TX_SYNC			0x0B0 0x2A0 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_39_WDOG1_B				0x0B0 0x2A0 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_39_GPIO3_IO25				0x0B0 0x2A0 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_39_USDHC2_CD_B				0x0B0 0x2A0 0x5E0 0x6 0x1
-
-#define MXRT1050_IOMUXC_GPIO_EMC_40_SEMC_RDY				0x0B4 0x2A4 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_40_GPT2_CAPTURE2			0x0B4 0x2A4 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_40_LPSPI1_PCS2				0x0B4 0x2A4 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_40_USB_OTG2_OC				0x0B4 0x2A4 0x5CC 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_40_ENET_MDC				0x0B4 0x2A4 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_40_GPIO3_IO26				0x0B4 0x2A4 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_40_USDHC2_RESET_B			0x0B4 0x2A4 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_EMC_41_SEMC_CSX0				0x0B8 0x2A8 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_41_GPT2_CAPTURE1			0x0B8 0x2A8 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_41_LPSPI1_PCS3				0x0B8 0x2A8 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_41_USB_OTG2_PWR			0x0B8 0x2A8 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_41_ENET_MDIO				0x0B8 0x2A8 0x430 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_EMC_41_GPIO3_IO27				0x0B8 0x2A8 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_EMC_41_USDHC2_VSELECT			0x0B8 0x2A8 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_00_FLEXPWM2_PWM3_A			0x0BC 0x2AC 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_00_XBAR_INOUT14			0x0BC 0x2AC 0x644 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_00_REF_CLK_32K			0x0BC 0x2AC 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USB_OTG2_ID			0x0BC 0x2AC 0x3F8 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPI2C1_SCLS			0x0BC 0x2AC 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_00_GPIO1_IO00			0x0BC 0x2AC 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USDHC1_RESET_B			0x0BC 0x2AC 0x000 0x6 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPSPI3_SCK			0x0BC 0x2AC 0x510 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_01_FLEXPWM2_PWM3_B			0x0C0 0x2B0 0x484 0x0 0x2
-#define MXRT1050_IOMUXC_GPIO_AD_B0_01_XBAR_INOUT15			0x0C0 0x2B0 0x648 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_01_REF_CLK_24M			0x0C0 0x2B0 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_01_USB_OTG1_ID			0x0C0 0x2B0 0x3F4 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPI2C1_SDAS			0x0C0 0x2B0 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_01_GPIO1_IO01			0x0C0 0x2B0 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_01_EWM_OUT_B				0x0C0 0x2B0 0x000 0x6 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPSPI3_SDO			0x0C0 0x2B0 0x518 0x7 0x1
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXCAN2_TX			0x0C4 0x2B4 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_02_XBAR_INOUT16			0x0C4 0x2B4 0x64C 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPUART6_TXD			0x0C4 0x2B4 0x554 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_02_USB_OTG1_PWR			0x0C4 0x2B4 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXPWM1_PWM0_X			0x0C4 0x2B4 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02			0x0C4 0x2B4 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPI2C1_HREQ			0x0C4 0x2B4 0x000 0x6 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPSPI3_SDI			0x0C4 0x2B4 0x514 0x7 0x1
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXCAN2_RX			0x0C8 0x2B8 0x450 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_03_XBAR_INOUT17			0x0C8 0x2B8 0x62C 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPUART6_RXD			0x0C8 0x2B8 0x550 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_03_USB_OTG1_OC			0x0C8 0x2B8 0x5D0 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXPWM1_PWM1_X			0x0C8 0x2B8 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_03_GPIO1_IO03			0x0C8 0x2B8 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_03_REF_CLK_24M			0x0C8 0x2B8 0x000 0x6 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPSPI3_PCS0			0x0C8 0x2B8 0x50C 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SRC_BOOT_MODE00			0x0CC 0x2BC 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_04_MQS_RIGHT				0x0CC 0x2BC 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_04_ENET_TX_DATA03			0x0CC 0x2BC 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SAI2_TX_SYNC			0x0CC 0x2BC 0x5C4 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_04_CSI_DATA09			0x0CC 0x2BC 0x41C 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_04_GPIO1_IO04			0x0CC 0x2BC 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_04_PIT_TRIGGER00			0x0CC 0x2BC 0x000 0x6 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_04_LPSPI3_PCS1			0x0CC 0x2BC 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SRC_BOOT_MODE01			0x0D0 0x2C0 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_05_MQS_LEFT				0x0D0 0x2C0 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_05_ENET_TX_DATA02			0x0D0 0x2C0 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SAI2_TX_BCLK			0x0D0 0x2C0 0x5C0 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_05_CSI_DATA08			0x0D0 0x2C0 0x418 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_05_GPIO1_IO05			0x0D0 0x2C0 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_05_XBAR_INOUT17			0x0D0 0x2C0 0x62C 0x6 0x2
-#define MXRT1050_IOMUXC_GPIO_AD_B0_05_LPSPI3_PCS2			0x0D0 0x2C0 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_06_JTAG_TMS				0x0D4 0x2C4 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPT2_COMPARE1			0x0D4 0x2C4 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_06_ENET_RX_CLK			0x0D4 0x2C4 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_06_SAI2_RX_BCLK			0x0D4 0x2C4 0x5B4 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_06_CSI_DATA07			0x0D4 0x2C4 0x414 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPIO1_IO06			0x0D4 0x2C4 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_06_XBAR_INOUT18			0x0D4 0x2C4 0x630 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_06_LPSPI3_PCS3			0x0D4 0x2C4 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_07_JTAG_TCK				0x0D8 0x2C8 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPT2_COMPARE2			0x0D8 0x2C8 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_TX_ER			0x0D8 0x2C8 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_07_SAI2_RX_SYNC			0x0D8 0x2C8 0x5BC 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_07_CSI_DATA06			0x0D8 0x2C8 0x410 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPIO1_IO07			0x0D8 0x2C8 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_07_XBAR_INOUT19			0x0D8 0x2C8 0x654 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_1588_EVENT3_OUT		0x0D8 0x2C8 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_08_JTAG_MOD				0x0DC 0x2CC 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPT2_COMPARE3			0x0DC 0x2CC 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_RX_DATA03			0x0DC 0x2CC 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_08_SAI2_RX_DATA			0x0DC 0x2CC 0x5B8 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_08_CSI_DATA05			0x0DC 0x2CC 0x40C 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPIO1_IO08			0x0DC 0x2CC 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_08_XBAR_INOUT20			0x0DC 0x2CC 0x634 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_1588_EVENT3_IN		0x0DC 0x2CC 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_09_JTAG_TDI				0x0E0 0x2D0 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_09_FLEXPWM2_PWM3_A			0x0E0 0x2D0 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_09_ENET_RX_DATA02			0x0E0 0x2D0 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_09_SAI2_TX_DATA			0x0E0 0x2D0 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_09_CSI_DATA04			0x0E0 0x2D0 0x408 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPIO1_IO09			0x0E0 0x2D0 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_09_XBAR_INOUT21			0x0E0 0x2D0 0x658 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPT2_CLK				0x0E0 0x2D0 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_10_JTAG_TDO				0x0E4 0x2D4 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_10_FLEXPWM1_PWM3_A			0x0E4 0x2D4 0x454 0x1 0x3
-#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_CRS				0x0E4 0x2D4 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_10_SAI2_MCLK				0x0E4 0x2D4 0x5B0 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_10_CSI_DATA03			0x0E4 0x2D4 0x404 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_10_GPIO1_IO10			0x0E4 0x2D4 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_10_XBAR_INOUT22			0x0E4 0x2D4 0x638 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_1588_EVENT0_OUT		0x0E4 0x2D4 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_11_JTAG_TRSTB			0x0E8 0x2D8 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_11_FLEXPWM1_PWM3_B			0x0E8 0x2D8 0x464 0x1 0x3
-#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_COL				0x0E8 0x2D8 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_11_WDOG1_B				0x0E8 0x2D8 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_11_CSI_DATA02			0x0E8 0x2D8 0x400 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_11_GPIO1_IO11			0x0E8 0x2D8 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_11_XBAR_INOUT23			0x0E8 0x2D8 0x63C 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_1588_EVENT0_IN		0x0E8 0x2D8 0x444 0x7 0x1
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPI2C4_SCL			0x0EC 0x2DC 0x4E4 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_12_CCM_PMIC_READY			0x0EC 0x2DC 0x3FC 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD			0x0EC 0x2DC 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_12_WDOG2_B				0x0EC 0x2DC 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_12_FLEXPWM1_PWM2_X			0x0EC 0x2DC 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_12_GPIO1_IO12			0x0EC 0x2DC 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_12_ENET_1588_EVENT1_OUT		0x0EC 0x2DC 0x000 0x6 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_12_NMI				0x0EC 0x2DC 0x568 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPI2C4_SDA			0x0F0 0x2E0 0x4E8 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPT1_CLK				0x0F0 0x2E0 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD			0x0F0 0x2E0 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_13_EWM_OUT_B				0x0F0 0x2E0 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_13_FLEXPWM1_PWM3_X			0x0F0 0x2E0 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPIO1_IO13			0x0F0 0x2E0 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_13_ENET_1588_EVENT1_IN		0x0F0 0x2E0 0x000 0x6 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_13_REF_CLK_24M			0x0F0 0x2E0 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_14_USB_OTG2_OC			0x0F4 0x2E4 0x5CC 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_14_XBAR_INOUT24			0x0F4 0x2E4 0x640 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B0_14_LPUART1_CTS_B			0x0F4 0x2E4 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_14_ENET_1588_EVENT0_OUT		0x0F4 0x2E4 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_14_CSI_VSYNC				0x0F4 0x2E4 0x428 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_14_GPIO1_IO14			0x0F4 0x2E4 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX			0x0F4 0x2E4 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B0_15_USB_OTG2_PWR			0x0F8 0x2E8 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_15_XBAR_INOUT25			0x0F8 0x2E8 0x650 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_15_LPUART1_RTS_B			0x0F8 0x2E8 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_15_ENET_1588_EVENT0_IN		0x0F8 0x2E8 0x444 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_15_CSI_HSYNC				0x0F8 0x2E8 0x420 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_15_GPIO1_IO15			0x0F8 0x2E8 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX			0x0F8 0x2E8 0x450 0x6 0x2
-#define MXRT1050_IOMUXC_GPIO_AD_B0_15_WDOG1_WDOG_RST_B_DEB		0x0F8 0x2E8 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USB_OTG2_ID			0x0FC 0x2EC 0x3F8 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_00_TMR3_TIMER0			0x0FC 0x2EC 0x57C 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPUART2_CTS_B			0x0FC 0x2EC 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL			0x0FC 0x2EC 0x4CC 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_00_WDOG1_B				0x0FC 0x2EC 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_00_GPIO1_IO16			0x0FC 0x2EC 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USDHC1_WP				0x0FC 0x2EC 0x5D8 0x6 0x2
-#define MXRT1050_IOMUXC_GPIO_AD_B1_00_KPP_ROW07				0x0FC 0x2EC 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USB_OTG1_PWR			0x100 0x2F0 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_01_TMR3_TIMER1			0x100 0x2F0 0x580 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPUART2_RTS_B			0x100 0x2F0 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA			0x100 0x2F0 0x4D0 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_01_CCM_PMIC_READY			0x100 0x2F0 0x3FC 0x4 0x2
-#define MXRT1050_IOMUXC_GPIO_AD_B1_01_GPIO1_IO17			0x100 0x2F0 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USDHC1_VSELECT			0x100 0x2F0 0x000 0x6 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_01_KPP_COL07				0x100 0x2F0 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USB_OTG1_ID			0x104 0x2F4 0x3F4 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_02_TMR3_TIMER2			0x104 0x2F4 0x584 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_02_LPUART2_TXD			0x104 0x2F4 0x530 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_02_SPDIF_OUT				0x104 0x2F4 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_02_ENET_1588_EVENT2_OUT		0x104 0x2F4 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_02_GPIO1_IO18			0x104 0x2F4 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USDHC1_CD_B			0x104 0x2F4 0x5D4 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_02_KPP_ROW06				0x104 0x2F4 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USB_OTG1_OC			0x108 0x2F8 0x5D0 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_03_TMR3_TIMER3			0x108 0x2F8 0x588 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_03_LPUART2_RXD			0x108 0x2F8 0x52C 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_03_SPDIF_IN				0x108 0x2F8 0x5C8 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_03_ENET_1588_EVENT2_IN		0x108 0x2F8 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_03_GPIO1_IO19			0x108 0x2F8 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USDHC2_CD_B			0x108 0x2F8 0x5E0 0x6 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_03_KPP_COL06				0x108 0x2F8 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_04_FLEXSPI_B_DATA3			0x10C 0x2FC 0x4C4 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_04_ENET_MDC				0x10C 0x2FC 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_04_LPUART3_CTS_B			0x10C 0x2FC 0x534 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_04_SPDIF_SR_CLK			0x10C 0x2FC 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK			0x10C 0x2FC 0x424 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_04_GPIO1_IO20			0x10C 0x2FC 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_04_USDHC2_DATA0			0x10C 0x2FC 0x5E8 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_04_KPP_ROW05				0x10C 0x2FC 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_05_FLEXSPI_B_DATA2			0x110 0x300 0x4C0 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_05_ENET_MDIO				0x110 0x300 0x430 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_05_LPUART3_RTS_B			0x110 0x300 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_05_SPDIF_OUT				0x110 0x300 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_05_CSI_MCLK				0x110 0x300 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_05_GPIO1_IO21			0x110 0x300 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_05_USDHC2_DATA1			0x110 0x300 0x5EC 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_05_KPP_COL05				0x110 0x300 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_06_FLEXSPI_B_DATA1			0x114 0x304 0x4BC 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA			0x114 0x304 0x4E0 0x1 0x2
-#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPUART3_TXD			0x114 0x304 0x53C 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_06_SPDIF_LOCK			0x114 0x304 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_06_CSI_VSYNC				0x114 0x304 0x428 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_06_GPIO1_IO22			0x114 0x304 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_06_USDHC2_DATA2			0x114 0x304 0x5F0 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_06_KPP_ROW04				0x114 0x304 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_07_FLEXSPI_B_DATA0			0x118 0x308 0x4B8 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL			0x118 0x308 0x4DC 0x1 0x2
-#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPUART3_RXD			0x118 0x308 0x538 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_07_SPDIF_EXT_CLK			0x118 0x308 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_07_CSI_HSYNC				0x118 0x308 0x420 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_07_GPIO1_IO23			0x118 0x308 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_07_USDHC2_DATA3			0x118 0x308 0x5F4 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_07_KPP_COL04				0x118 0x308 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXSPI_A_SS1_B			0x11C 0x30C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXPWM4_PWM0_A			0x11C 0x30C 0x494 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXCAN1_TX			0x11C 0x30C 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CCM_PMIC_READY			0x11C 0x30C 0x3FC 0x3 0x3
-#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CSI_DATA09			0x11C 0x30C 0x41C 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_08_GPIO1_IO24			0x11C 0x30C 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_08_USDHC2_CMD			0x11C 0x30C 0x5E4 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_08_KPP_ROW03				0x11C 0x30C 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXSPI_A_DQS			0x120 0x310 0x4A4 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXPWM4_PWM1_A			0x120 0x310 0x498 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXCAN1_RX			0x120 0x310 0x44C 0x2 0x2
-#define MXRT1050_IOMUXC_GPIO_AD_B1_09_SAI1_MCLK				0x120 0x310 0x58C 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_09_CSI_DATA08			0x120 0x310 0x418 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_09_GPIO1_IO25			0x120 0x310 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_09_USDHC2_CLK			0x120 0x310 0x5DC 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_09_KPP_COL03				0x120 0x310 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_10_FLEXSPI_A_DATA3			0x124 0x314 0x4B4 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_10_WDOG1_B				0x124 0x314 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_10_LPUART8_TXD			0x124 0x314 0x564 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_10_SAI1_RX_SYNC			0x124 0x314 0x5A4 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_10_CSI_DATA07			0x124 0x314 0x414 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_10_GPIO1_IO26			0x124 0x314 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_10_USDHC2_WP				0x124 0x314 0x608 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_10_KPP_ROW02				0x124 0x314 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_11_FLEXSPI_A_DATA2			0x128 0x318 0x4B0 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_11_EWM_OUT_B				0x128 0x318 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_11_LPUART8_RXD			0x128 0x318 0x560 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_11_SAI1_RX_BCLK			0x128 0x318 0x590 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_11_CSI_DATA06			0x128 0x318 0x410 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_11_GPIO1_IO27			0x128 0x318 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_11_USDHC2_RESET_B			0x128 0x318 0x000 0x6 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_11_KPP_COL02				0x128 0x318 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_12_FLEXSPI_A_DATA1			0x12C 0x31C 0x4AC 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_12_ACMP1_OUT				0x12C 0x31C 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_12_LPSPI3_PCS0			0x12C 0x31C 0x50C 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_12_SAI1_RX_DATA00			0x12C 0x31C 0x594 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_12_CSI_DATA05			0x12C 0x31C 0x40C 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_12_GPIO1_IO28			0x12C 0x31C 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_12_USDHC2_DATA4			0x12C 0x31C 0x5F8 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_12_KPP_ROW01				0x12C 0x31C 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_13_FLEXSPI_A_DATA0			0x130 0x320 0x4A8 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_13_ACMP2_OUT				0x130 0x320 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_13_LPSPI3_SDI			0x130 0x320 0x514 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_13_SAI1_TX_DATA00			0x130 0x320 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_13_CSI_DATA04			0x130 0x320 0x408 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_13_GPIO1_IO29			0x130 0x320 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_13_USDHC2_DATA5			0x130 0x320 0x5FC 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_13_KPP_COL01				0x130 0x320 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_14_FLEXSPI_A_SCLK			0x134 0x324 0x4C8 0x0 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_14_ACMP3_OUT				0x134 0x324 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO			0x134 0x324 0x518 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_14_SAI1_TX_BCLK			0x134 0x324 0x5A8 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_14_CSI_DATA03			0x134 0x324 0x404 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_14_GPIO1_IO30			0x134 0x324 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_14_USDHC2_DATA6			0x134 0x324 0x600 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_14_KPP_ROW00				0x134 0x324 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_AD_B1_15_FLEXSPI_A_SS0_B			0x138 0x328 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_15_ACMP4_OUT				0x138 0x328 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_15_LPSPI3_SCK			0x138 0x328 0x510 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_15_SAI1_TX_SYNC			0x138 0x328 0x5AC 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_15_CSI_DATA02			0x138 0x328 0x400 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_15_GPIO1_IO31			0x138 0x328 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_AD_B1_15_USDHC2_DATA7			0x138 0x328 0x604 0x6 0x1
-#define MXRT1050_IOMUXC_GPIO_AD_B1_15_KPP_COL00				0x138 0x328 0x000 0x7 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK				0x13C 0x32C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_00_TMR1_TIMER0				0x13C 0x32C 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_00_MQS_RIGHT				0x13C 0x32C 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_00_LPSPI4_PCS0				0x13C 0x32C 0x51C 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_00_FLEXIO2_D00				0x13C 0x32C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_00_GPIO2_IO00				0x13C 0x32C 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_00_SEMC_CSX1				0x13C 0x32C 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE				0x140 0x330 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_01_TMR1_TIMER1				0x140 0x330 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_01_MQS_LEFT				0x140 0x330 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_01_LPSPI4_SDI				0x140 0x330 0x524 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_01_FLEXIO2_D01				0x140 0x330 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_01_GPIO2_IO01				0x140 0x330 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_01_SEMC_CSX2				0x140 0x330 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC				0x144 0x334 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_02_TMR1_TIMER2				0x144 0x334 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXCAN1_TX				0x144 0x334 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_02_LPSPI4_SDO				0x144 0x334 0x528 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXIO2_D02				0x144 0x334 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_02_GPIO2_IO02				0x144 0x334 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_02_SEMC_CSX3				0x144 0x334 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC				0x148 0x338 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_03_TMR2_TIMER0				0x148 0x338 0x56C 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXCAN1_RX				0x148 0x338 0x44C 0x2 0x3
-#define MXRT1050_IOMUXC_GPIO_B0_03_LPSPI4_SCK				0x148 0x338 0x520 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXIO2_D03				0x148 0x338 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_03_GPIO2_IO03				0x148 0x338 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_03_WDOG2_RESET_B_DEB			0x148 0x338 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00				0x14C 0x33C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_04_TMR2_TIMER1				0x14C 0x33C 0x570 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_04_LPI2C2_SCL				0x14C 0x33C 0x4D4 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_04_ARM_TRACE00				0x14C 0x33C 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_04_FLEXIO2_D04				0x14C 0x33C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_04_GPIO2_IO04				0x14C 0x33C 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_04_SRC_BT_CFG00				0x14C 0x33C 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01				0x150 0x340 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_05_TMR2_TIMER2				0x150 0x340 0x574 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_05_LPI2C2_SDA				0x150 0x340 0x4D8 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_05_ARM_TRACE01				0x150 0x340 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_05_FLEXIO2_D05				0x150 0x340 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_05_GPIO2_IO05				0x150 0x340 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_05_SRC_BT_CFG01				0x150 0x340 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02				0x154 0x344 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_06_TMR3_TIMER0				0x154 0x344 0x57C 0x1 0x2
-#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXPWM2_PWM0_A			0x154 0x344 0x478 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_06_ARM_TRACE02				0x154 0x344 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXIO2_D06				0x154 0x344 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_06_GPIO2_IO06				0x154 0x344 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_06_SRC_BT_CFG02				0x154 0x344 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03				0x158 0x348 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_07_TMR3_TIMER1				0x158 0x348 0x580 0x1 0x2
-#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXPWM2_PWM0_B			0x158 0x348 0x488 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_07_ARM_TRACE03				0x158 0x348 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXIO2_D07				0x158 0x348 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_07_GPIO2_IO07				0x158 0x348 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_07_SRC_BT_CFG03				0x158 0x348 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04				0x15C 0x34C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_08_TMR3_TIMER2				0x15C 0x34C 0x584 0x1 0x2
-#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXPWM2_PWM1_A			0x15C 0x34C 0x47C 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_08_LPUART3_TXD				0x15C 0x34C 0x53C 0x3 0x2
-#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXIO2_D08				0x15C 0x34C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_08_GPIO2_IO08				0x15C 0x34C 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_08_SRC_BT_CFG04				0x15C 0x34C 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05				0x160 0x350 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_09_TMR4_TIMER0				0x160 0x350 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXPWM2_PWM1_B			0x160 0x350 0x48C 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_09_LPUART3_RXD				0x160 0x350 0x538 0x3 0x2
-#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXIO2_D09				0x160 0x350 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_09_GPIO2_IO09				0x160 0x350 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_09_SRC_BT_CFG05				0x160 0x350 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06				0x164 0x354 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_10_TMR4_TIMER1				0x164 0x354 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXPWM2_PWM2_A			0x164 0x354 0x480 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_10_SAI1_TX_DATA03			0x164 0x354 0x598 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXIO2_D10				0x164 0x354 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_10_GPIO2_IO10				0x164 0x354 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_10_SRC_BT_CFG06				0x164 0x354 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07				0x168 0x358 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_11_TMR4_TIMER2				0x168 0x358 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXPWM2_PWM2_B			0x168 0x358 0x490 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_11_SAI1_TX_DATA02			0x168 0x358 0x59C 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXIO2_D11				0x168 0x358 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_11_GPIO2_IO11				0x168 0x358 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_11_SRC_BT_CFG07				0x168 0x358 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08				0x16C 0x35C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_12_XBAR_INOUT10				0x16C 0x35C 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_12_ARM_TRACE_CLK			0x16C 0x35C 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_12_SAI1_TX_DATA01			0x16C 0x35C 0x5A0 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_B0_12_FLEXIO2_D12				0x16C 0x35C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_12_GPIO2_IO12				0x16C 0x35C 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_12_SRC_BT_CFG08				0x16C 0x35C 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09				0x170 0x360 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_13_XBAR_INOUT11				0x170 0x360 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_13_ARM_TRACE_SWO			0x170 0x360 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_13_SAI1_MCLK				0x170 0x360 0x58C 0x3 0x2
-#define MXRT1050_IOMUXC_GPIO_B0_13_FLEXIO2_D13				0x170 0x360 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_13_GPIO2_IO13				0x170 0x360 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_13_SRC_BT_CFG09				0x170 0x360 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10				0x174 0x364 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_14_XBAR_INOUT12				0x174 0x364 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_14_ARM_CM7_TXEV				0x174 0x364 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_14_SAI1_RX_SYNC				0x174 0x364 0x5A4 0x3 0x2
-#define MXRT1050_IOMUXC_GPIO_B0_14_FLEXIO2_D14				0x174 0x364 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_14_GPIO2_IO14				0x174 0x364 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_14_SRC_BT_CFG10				0x174 0x364 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11				0x178 0x368 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_15_XBAR_INOUT13				0x178 0x368 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_15_ARM_CM7_RXEV				0x178 0x368 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_15_SAI1_RX_BCLK				0x178 0x368 0x590 0x3 0x2
-#define MXRT1050_IOMUXC_GPIO_B0_15_FLEXIO2_D15				0x178 0x368 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_15_GPIO2_IO15				0x178 0x368 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B0_15_SRC_BT_CFG11				0x178 0x368 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B1_00_LCD_DATA12				0x17C 0x36C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_00_XBAR_INOUT14				0x17C 0x36C 0x644 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_00_LPUART4_TXD				0x17C 0x36C 0x544 0x2 0x2
-#define MXRT1050_IOMUXC_GPIO_B1_00_SAI1_RX_DATA00			0x17C 0x36C 0x594 0x3 0x2
-#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXIO2_D16				0x17C 0x36C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_00_GPIO2_IO16				0x17C 0x36C 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXPWM1_PWM3_A			0x17C 0x36C 0x454 0x6 0x4
-
-#define MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13				0x180 0x370 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_01_XBAR_INOUT15				0x180 0x370 0x648 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_01_LPUART4_RXD				0x180 0x370 0x540 0x2 0x2
-#define MXRT1050_IOMUXC_GPIO_B1_01_SAI1_TX_DATA00			0x180 0x370 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXIO2_D17				0x180 0x370 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_01_GPIO2_IO17				0x180 0x370 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXPWM1_PWM3_B			0x180 0x370 0x464 0x6 0x4
-
-#define MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14				0x184 0x374 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_02_XBAR_INOUT16				0x184 0x374 0x64C 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_02_LPSPI4_PCS2				0x184 0x374 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_02_SAI1_TX_BCLK				0x184 0x374 0x5A8 0x3 0x2
-#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXIO2_D18				0x184 0x374 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_02_GPIO2_IO18				0x184 0x374 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXPWM2_PWM3_A			0x184 0x374 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15				0x188 0x378 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_03_XBAR_INOUT17				0x188 0x378 0x62C 0x1 0x3
-#define MXRT1050_IOMUXC_GPIO_B1_03_LPSPI4_PCS1				0x188 0x378 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_03_SAI1_TX_SYNC				0x188 0x378 0x5AC 0x3 0x2
-#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXIO2_D19				0x188 0x378 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_03_GPIO2_IO19				0x188 0x378 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXPWM2_PWM3_B			0x188 0x378 0x484 0x6 0x3
-
-#define MXRT1050_IOMUXC_GPIO_B1_04_LCD_DATA16				0x18C 0x37C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_04_LPSPI4_PCS0				0x18C 0x37C 0x51C 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_04_CSI_DATA15				0x18C 0x37C 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_04_ENET_RX_DATA00			0x18C 0x37C 0x434 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_04_FLEXIO2_D20				0x18C 0x37C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_04_GPIO2_IO20				0x18C 0x37C 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B1_05_LCD_DATA17				0x190 0x380 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_05_LPSPI4_SDI				0x190 0x380 0x524 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_05_CSI_DATA14				0x190 0x380 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_05_ENET_RX_DATA01			0x190 0x380 0x438 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_05_FLEXIO2_D21				0x190 0x380 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_05_GPIO2_IO21				0x190 0x380 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B1_06_LCD_DATA18				0x194 0x384 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_06_LPSPI4_SDO				0x194 0x384 0x528 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_06_CSI_DATA13				0x194 0x384 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_06_ENET_RX_EN				0x194 0x384 0x43C 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_06_FLEXIO2_D22				0x194 0x384 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_06_GPIO2_IO22				0x194 0x384 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B1_07_LCD_DATA19				0x198 0x388 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_07_LPSPI4_SCK				0x198 0x388 0x520 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_07_CSI_DATA12				0x198 0x388 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_07_ENET_TX_DATA00			0x198 0x388 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_07_FLEXIO2_D23				0x198 0x388 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_07_GPIO2_IO23				0x198 0x388 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B1_08_LCD_DATA20				0x19C 0x38C 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_08_TMR1_TIMER3				0x19C 0x38C 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_08_CSI_DATA11				0x19C 0x38C 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_08_ENET_TX_DATA01			0x19C 0x38C 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXIO2_D24				0x19C 0x38C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_08_GPIO2_IO24				0x19C 0x38C 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXCAN2_TX				0x19C 0x38C 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B1_09_LCD_DATA21				0x1A0 0x390 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_09_TMR2_TIMER3				0x1A0 0x390 0x578 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_09_CSI_DATA10				0x1A0 0x390 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_09_ENET_TX_EN				0x1A0 0x390 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXIO2_D25				0x1A0 0x390 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_09_GPIO2_IO25				0x1A0 0x390 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXCAN2_RX				0x1A0 0x390 0x450 0x6 0x3
-
-#define MXRT1050_IOMUXC_GPIO_B1_10_LCD_DATA22				0x1A4 0x394 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_10_TMR3_TIMER3				0x1A4 0x394 0x588 0x1 0x2
-#define MXRT1050_IOMUXC_GPIO_B1_10_CSI_DATA00				0x1A4 0x394 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_TX_CLK				0x1A4 0x394 0x448 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_10_FLEXIO2_D26				0x1A4 0x394 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_10_GPIO2_IO26				0x1A4 0x394 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_REF_CLK				0x1A4 0x394 0x42C 0x6 0x1
-
-#define MXRT1050_IOMUXC_GPIO_B1_11_LCD_DATA23				0x1A8 0x398 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_11_TMR4_TIMER3				0x1A8 0x398 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_11_CSI_DATA01				0x1A8 0x398 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_11_ENET_RX_ER				0x1A8 0x398 0x440 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_11_FLEXIO2_D27				0x1A8 0x398 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_11_GPIO2_IO27				0x1A8 0x398 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_11_LPSPI4_PCS3				0x1A8 0x398 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B1_12_LPUART5_TXD				0x1AC 0x39C 0x54C 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_12_CSI_PIXCLK				0x1AC 0x39C 0x424 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_12_ENET_1588_EVENT0_IN			0x1AC 0x39C 0x444 0x3 0x2
-#define MXRT1050_IOMUXC_GPIO_B1_12_FLEXIO2_D28				0x1AC 0x39C 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_12_GPIO2_IO28				0x1AC 0x39C 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B				0x1AC 0x39C 0x5D4 0x6 0x2
-
-#define MXRT1050_IOMUXC_GPIO_B1_13_WDOG1_B				0x1B0 0x3A0 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_13_LPUART5_RXD				0x1B0 0x3A0 0x548 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_13_CSI_VSYNC				0x1B0 0x3A0 0x428 0x2 0x2
-#define MXRT1050_IOMUXC_GPIO_B1_13_ENET_1588_EVENT0_OUT			0x1B0 0x3A0 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_13_FLEXIO2_D29				0x1B0 0x3A0 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_13_GPIO2_IO29				0x1B0 0x3A0 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_13_USDHC1_WP				0x1B0 0x3A0 0x5D8 0x6 0x3
-
-#define MXRT1050_IOMUXC_GPIO_B1_14_ENET_MDC				0x1B4 0x3A4 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXPWM4_PWM2_A			0x1B4 0x3A4 0x49C 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_14_CSI_HSYNC				0x1B4 0x3A4 0x420 0x2 0x2
-#define MXRT1050_IOMUXC_GPIO_B1_14_XBAR_INOUT02				0x1B4 0x3A4 0x60C 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXIO2_D30				0x1B4 0x3A4 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_14_GPIO2_IO30				0x1B4 0x3A4 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT			0x1B4 0x3A4 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_B1_15_ENET_MDIO				0x1B8 0x3A8 0x430 0x0 0x2
-#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXPWM4_PWM3_A			0x1B8 0x3A8 0x4A0 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_15_CSI_MCLK				0x1B8 0x3A8 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_15_XBAR_INOUT03				0x1B8 0x3A8 0x610 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXIO2_D31				0x1B8 0x3A8 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31				0x1B8 0x3A8 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_B1_15_USDHC1_RESET_B			0x1B8 0x3A8 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD			0x1BC 0x3AC 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXPWM1_PWM0_A			0x1BC 0x3AC 0x458 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPI2C3_SCL			0x1BC 0x3AC 0x4DC 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_00_XBAR_INOUT04			0x1BC 0x3AC 0x614 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPSPI1_SCK			0x1BC 0x3AC 0x4F0 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_00_GPIO3_IO12			0x1BC 0x3AC 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXSPI_A_SS1_B			0x1BC 0x3AC 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK			0x1C0 0x3B0 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXPWM1_PWM0_B			0x1C0 0x3B0 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPI2C3_SDA			0x1C0 0x3B0 0x4E0 0x2 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_01_XBAR_INOUT05			0x1C0 0x3B0 0x618 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPSPI1_PCS0			0x1C0 0x3B0 0x4EC 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_01_GPIO3_IO13			0x1C0 0x3B0 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXSPI_B_SS1_B			0x1C0 0x3B0 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0			0x1C4 0x3B4 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_02_FLEXPWM1_PWM1_A			0x1C4 0x3B4 0x45C 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPUART8_CTS_B			0x1C4 0x3B4 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_02_XBAR_INOUT06			0x1C4 0x3B4 0x61C 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO			0x1C4 0x3B4 0x4F8 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_02_GPIO3_IO14			0x1C4 0x3B4 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1			0x1C8 0x3B8 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_03_FLEXPWM1_PWM1_B			0x1C8 0x3B8 0x46C 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPUART8_RTS_B			0x1C8 0x3B8 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_03_XBAR_INOUT07			0x1C8 0x3B8 0x620 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI			0x1C8 0x3B8 0x4F4 0x4 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_03_GPIO3_IO15			0x1C8 0x3B8 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2			0x1CC 0x3BC 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXPWM1_PWM2_A			0x1CC 0x3BC 0x460 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_04_LPUART8_TXD			0x1CC 0x3BC 0x564 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_04_XBAR_INOUT08			0x1CC 0x3BC 0x624 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXSPI_B_SS0_B			0x1CC 0x3BC 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_04_GPIO3_IO16			0x1CC 0x3BC 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_04_CCM_CLKO1				0x1CC 0x3BC 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3			0x1D0 0x3C0 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXPWM1_PWM2_B			0x1D0 0x3C0 0x470 0x1 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_05_LPUART8_RXD			0x1D0 0x3C0 0x560 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_05_XBAR_INOUT09			0x1D0 0x3C0 0x628 0x3 0x1
-#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXSPI_B_DQS			0x1D0 0x3C0 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_05_GPIO3_IO17			0x1D0 0x3C0 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B0_05_CCM_CLKO2				0x1D0 0x3C0 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B1_00_USDHC2_DATA3			0x1D4 0x3C4 0x5F4 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXSPI_B_DATA3			0x1D4 0x3C4 0x4C4 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXPWM1_PWM3_A			0x1D4 0x3C4 0x454 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_00_SAI1_TX_DATA03			0x1D4 0x3C4 0x598 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_00_LPUART4_TXD			0x1D4 0x3C4 0x544 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_00_GPIO3_IO00			0x1D4 0x3C4 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B1_01_USDHC2_DATA2			0x1D8 0x3C8 0x5F0 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXSPI_B_DATA2			0x1D8 0x3C8 0x4C0 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXPWM1_PWM3_B			0x1D8 0x3C8 0x464 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_01_SAI1_TX_DATA02			0x1D8 0x3C8 0x59C 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_01_LPUART4_RXD			0x1D8 0x3C8 0x540 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_01_GPIO3_IO01			0x1D8 0x3C8 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B1_02_USDHC2_DATA1			0x1DC 0x3CC 0x5EC 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXSPI_B_DATA1			0x1DC 0x3CC 0x4BC 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXPWM2_PWM3_A			0x1DC 0x3CC 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_02_SAI1_TX_DATA01			0x1DC 0x3CC 0x5A0 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXCAN1_TX			0x1DC 0x3CC 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_02_GPIO3_IO02			0x1DC 0x3CC 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_02_CCM_WAIT				0x1DC 0x3CC 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B1_03_USDHC2_DATA0			0x1E0 0x3D0 0x5E8 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXSPI_B_DATA0			0x1E0 0x3D0 0x4B8 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXPWM2_PWM3_B			0x1E0 0x3D0 0x484 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_03_SAI1_MCLK				0x1E0 0x3D0 0x58C 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXCAN1_RX			0x1E0 0x3D0 0x44C 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_03_GPIO3_IO03			0x1E0 0x3D0 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_03_CCM_PMIC_READY			0x1E0 0x3D0 0x3FC 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B1_04_USDHC2_CLK			0x1E4 0x3D4 0x5DC 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXSPI_B_SCLK			0x1E4 0x3D4 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_04_LPI2C1_SCL			0x1E4 0x3D4 0x4CC 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_04_SAI1_RX_SYNC			0x1E4 0x3D4 0x5A4 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXCAN1_A_SS1_B			0x1E4 0x3D4 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_04_GPIO3_IO04			0x1E4 0x3D4 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_04_CCM_STOP				0x1E4 0x3D4 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B1_05_USDHC2_CMD			0x1E8 0x3D8 0x5E4 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXSPI_A_DQS			0x1E8 0x3D8 0x4A4 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_05_LPI2C1_SDA			0x1E8 0x3D8 0x4D0 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_05_SAI1_RX_BCLK			0x1E8 0x3D8 0x590 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXCAN1_B_SS0_B			0x1E8 0x3D8 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_05_GPIO3_IO05			0x1E8 0x3D8 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B1_06_USDHC2_RESET_B			0x1EC 0x3DC 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_SS0_B			0x1EC 0x3DC 0x000 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPUART7_CTS_B			0x1EC 0x3DC 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_06_SAI1_RX_DATA00			0x1EC 0x3DC 0x594 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPSPI2_PCS0			0x1EC 0x3DC 0x4FC 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_06_GPIO3_IO06			0x1EC 0x3DC 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SEMC_CSX1				0x1F0 0x3E0 0x000 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK			0x1F0 0x3E0 0x4C8 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPUART7_RTS_B			0x1F0 0x3E0 0x000 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SAI1_TX_DATA00			0x1F0 0x3E0 0x000 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPSPI2_SCK			0x1F0 0x3E0 0x500 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_07_GPIO3_IO07			0x1F0 0x3E0 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_07_CCM_REF_EN_B			0x1F0 0x3E0 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B1_08_USDHC2_DATA4			0x1F4 0x3E4 0x5F8 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA0			0x1F4 0x3E4 0x4A8 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPUART7_TXD			0x1F4 0x3E4 0x55C 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SAI1_TX_BLCK			0x1F4 0x3E4 0x5A8 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPSPI2_SDO			0x1F4 0x3E4 0x508 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_08_GPIO3_IO08			0x1F4 0x3E4 0x000 0x5 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SEMC_CSX2				0x1F4 0x3E4 0x000 0x6 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B1_09_USDHC2_DATA5			0x1F8 0x3E8 0x5FC 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA1			0x1F8 0x3E8 0x4AC 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPUART7_RXD			0x1F8 0x3E8 0x558 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_09_SAI1_TX_SYNC			0x1F8 0x3E8 0x5AC 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPSPI2_SDI			0x1F8 0x3E8 0x504 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_09_GPIO3_IO09			0x1F8 0x3E8 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B1_10_USDHC2_DATA6			0x1FC 0x3EC 0x600 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA2			0x1FC 0x3EC 0x4B0 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPUART2_RXD			0x1FC 0x3EC 0x52C 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPI2C2_SDA			0x1FC 0x3EC 0x4D8 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPSPI2_PCS2			0x1FC 0x3EC 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_10_GPIO3_IO10			0x1FC 0x3EC 0x000 0x5 0x0
-
-#define MXRT1050_IOMUXC_GPIO_SD_B1_11_USDHC2_DATA7			0x200 0x3F0 0x604 0x0 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_DATA3			0x200 0x3F0 0x4B4 0x1 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPUART2_TXD			0x200 0x3F0 0x530 0x2 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPI2C2_SCL			0x200 0x3F0 0x4D4 0x3 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPSPI2_PCS3			0x200 0x3F0 0x000 0x4 0x0
-#define MXRT1050_IOMUXC_GPIO_SD_B1_11_GPIO3_IO11			0x200 0x3F0 0x000 0x5 0x0
-
-#endif /* _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi
deleted file mode 100644
index 852861558b477..0000000000000
--- a/arch/arm/boot/dts/imxrt1050.dtsi
+++ /dev/null
@@ -1,160 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019
- * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
- */
-
-#include "armv7-m.dtsi"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/imxrt1050-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	clocks {
-		osc: osc {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-
-		osc3M: osc3M {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <3000000>;
-		};
-	};
-
-	soc {
-		lpuart1: serial@40184000 {
-			compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
-			reg = <0x40184000 0x4000>;
-			interrupts = <20>;
-			clocks = <&clks IMXRT1050_CLK_LPUART1>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		iomuxc: pinctrl@401f8000 {
-			compatible = "fsl,imxrt1050-iomuxc";
-			reg = <0x401f8000 0x4000>;
-			fsl,mux_mask = <0x7>;
-		};
-
-		anatop: anatop@400d8000 {
-			compatible = "fsl,imxrt-anatop";
-			reg = <0x400d8000 0x4000>;
-		};
-
-		clks: clock-controller@400fc000 {
-			compatible = "fsl,imxrt1050-ccm";
-			reg = <0x400fc000 0x4000>;
-			interrupts = <95>, <96>;
-			clocks = <&osc>;
-			clock-names = "osc";
-			#clock-cells = <1>;
-			assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>,
-				<&clks IMXRT1050_CLK_PLL1_BYPASS>,
-				<&clks IMXRT1050_CLK_PLL2_BYPASS>,
-				<&clks IMXRT1050_CLK_PLL3_BYPASS>,
-				<&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>,
-				<&clks IMXRT1050_CLK_PLL2_PFD2_396M>;
-			assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>,
-				<&clks IMXRT1050_CLK_PLL1_ARM>,
-				<&clks IMXRT1050_CLK_PLL2_SYS>,
-				<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
-				<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
-				<&clks IMXRT1050_CLK_PLL2_SYS>;
-		};
-
-		edma1: dma-controller@400e8000 {
-			#dma-cells = <2>;
-			compatible = "fsl,imx7ulp-edma";
-			reg = <0x400e8000 0x4000>,
-				<0x400ec000 0x4000>;
-			dma-channels = <32>;
-			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
-				<9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
-			clock-names = "dma", "dmamux0";
-			clocks = <&clks IMXRT1050_CLK_DMA>,
-				 <&clks IMXRT1050_CLK_DMA_MUX>;
-		};
-
-		usdhc1: mmc@402c0000 {
-			compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
-			reg = <0x402c0000 0x4000>;
-			interrupts = <110>;
-			clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
-				<&clks IMXRT1050_CLK_OSC>,
-				<&clks IMXRT1050_CLK_USDHC1>;
-			clock-names = "ipg", "ahb", "per";
-			bus-width = <4>;
-			fsl,wp-controller;
-			no-1-8-v;
-			max-frequency = <200000000>;
-			fsl,tuning-start-tap = <20>;
-			fsl,tuning-step = <2>;
-			status = "disabled";
-		};
-
-		gpio1: gpio@401b8000 {
-			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
-			reg = <0x401b8000 0x4000>;
-			interrupts = <80>, <81>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@401bc000 {
-			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
-			reg = <0x401bc000 0x4000>;
-			interrupts = <82>, <83>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@401c0000 {
-			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
-			reg = <0x401c0000 0x4000>;
-			interrupts = <84>, <85>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio@401c4000 {
-			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
-			reg = <0x401c4000 0x4000>;
-			interrupts = <86>, <87>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio5: gpio@400c0000 {
-			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
-			reg = <0x400c0000 0x4000>;
-			interrupts = <88>, <89>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpt: timer@401ec000 {
-			compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
-			reg = <0x401ec000 0x4000>;
-			interrupts = <100>;
-			clocks = <&osc3M>;
-			clock-names = "per";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imxrt1170-pinfunc.h b/arch/arm/boot/dts/imxrt1170-pinfunc.h
deleted file mode 100644
index 3b9fff2f08e19..0000000000000
--- a/arch/arm/boot/dts/imxrt1170-pinfunc.h
+++ /dev/null
@@ -1,1561 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
-/*
- * Copyright (C) 2021
- * Author(s): Jesse Taube <Mr.Bossman075@gmail.com>
- */
-
-#ifndef _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H
-#define _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H
-
-#define IMX_PAD_SION		0x40000000
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-
-#define IOMUXC_GPIO_LPSR_00_FLEXCAN3_TX				0x000 0x040 0x0 0x0 0x0
-#define IOMUXC_GPIO_LPSR_00_MIC_CLK				0x000 0x040 0x0 0x1 0x0
-#define IOMUXC_GPIO_LPSR_00_MQS_RIGHT				0x000 0x040 0x0 0x2 0x0
-#define IOMUXC_GPIO_LPSR_00_ARM_CM4_EVENTO			0x000 0x040 0x0 0x3 0x0
-#define IOMUXC_GPIO_LPSR_00_GPIO_MUX6_IO00			0x000 0x040 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_00_LPUART12_TXD			0x000 0x040 0x0B0 0x6 0x0
-#define IOMUXC_GPIO_LPSR_00_SAI4_MCLK				0x000 0x040 0x0C8 0x7 0x0
-#define IOMUXC_GPIO_LPSR_00_GPIO12_IO00				0x000 0x040 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_LPSR_01_FLEXCAN3_RX				0x004 0x044 0x080 0x0 0x0
-#define IOMUXC_GPIO_LPSR_01_MIC_BITSTREAM0			0x004 0x044 0x0B4 0x1 0x0
-#define IOMUXC_GPIO_LPSR_01_MQS_LEFT				0x004 0x044 0x0 0x2 0x0
-#define IOMUXC_GPIO_LPSR_01_ARM_CM4_EVENTI			0x004 0x044 0x0 0x3 0x0
-#define IOMUXC_GPIO_LPSR_01_GPIO_MUX6_IO01			0x004 0x044 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_01_LPUART12_RXD			0x004 0x044 0x0AC 0x6 0x0
-#define IOMUXC_GPIO_LPSR_01_GPIO12_IO01				0x004 0x044 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_LPSR_02_GPIO12_IO02				0x008 0x048 0x0 0xA 0x0
-#define IOMUXC_GPIO_LPSR_02_SRC_BOOT_MODE00			0x008 0x048 0x0 0x0 0x0
-#define IOMUXC_GPIO_LPSR_02_LPSPI5_SCK				0x008 0x048 0x098 0x1 0x0
-#define IOMUXC_GPIO_LPSR_02_SAI4_TX_DATA			0x008 0x048 0x0 0x2 0x0
-#define IOMUXC_GPIO_LPSR_02_MQS_RIGHT				0x008 0x048 0x0 0x3 0x0
-#define IOMUXC_GPIO_LPSR_02_GPIO_MUX6_IO02			0x008 0x048 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_LPSR_03_SRC_BOOT_MODE01			0x00C 0x04C 0x0 0x0 0x0
-#define IOMUXC_GPIO_LPSR_03_LPSPI5_PCS0				0x00C 0x04C 0x094 0x1 0x0
-#define IOMUXC_GPIO_LPSR_03_SAI4_TX_SYNC			0x00C 0x04C 0x0DC 0x2 0x0
-#define IOMUXC_GPIO_LPSR_03_MQS_LEFT				0x00C 0x04C 0x0 0x3 0x0
-#define IOMUXC_GPIO_LPSR_03_GPIO_MUX6_IO03			0x00C 0x04C 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_03_GPIO12_IO03				0x00C 0x04C 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_LPSR_04_LPI2C5_SDA				0x010 0x050 0x088 0x0 0x0
-#define IOMUXC_GPIO_LPSR_04_LPSPI5_SOUT				0x010 0x050 0x0A0 0x1 0x0
-#define IOMUXC_GPIO_LPSR_04_SAI4_TX_BCLK			0x010 0x050 0x0D8 0x2 0x0
-#define IOMUXC_GPIO_LPSR_04_LPUART12_RTS_B			0x010 0x050 0x0 0x3 0x0
-#define IOMUXC_GPIO_LPSR_04_GPIO_MUX6_IO04			0x010 0x050 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_04_LPUART11_TXD			0x010 0x050 0x0A8 0x6 0x0
-#define IOMUXC_GPIO_LPSR_04_GPIO12_IO04				0x010 0x050 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_LPSR_05_GPIO12_IO05				0x014 0x054 0x0 0xA 0x0
-#define IOMUXC_GPIO_LPSR_05_LPI2C5_SCL				0x014 0x054 0x084 0x0 0x0
-#define IOMUXC_GPIO_LPSR_05_LPSPI5_SIN				0x014 0x054 0x09C 0x1 0x0
-#define IOMUXC_GPIO_LPSR_05_SAI4_MCLK				0x014 0x054 0x0C8 0x2 0x1
-#define IOMUXC_GPIO_LPSR_05_LPUART12_CTS_B			0x014 0x054 0x0 0x3 0x0
-#define IOMUXC_GPIO_LPSR_05_GPIO_MUX6_IO05			0x014 0x054 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_05_LPUART11_RXD			0x014 0x054 0x0A4 0x6 0x0
-#define IOMUXC_GPIO_LPSR_05_NMI_GLUE_NMI			0x014 0x054 0x0C4 0x7 0x0
-
-#define IOMUXC_GPIO_LPSR_06_LPI2C6_SDA				0x018 0x058 0x090 0x0 0x0
-#define IOMUXC_GPIO_LPSR_06_SAI4_RX_DATA			0x018 0x058 0x0D0 0x2 0x0
-#define IOMUXC_GPIO_LPSR_06_LPUART12_TXD			0x018 0x058 0x0B0 0x3 0x1
-#define IOMUXC_GPIO_LPSR_06_LPSPI6_PCS3				0x018 0x058 0x0 0x4 0x0
-#define IOMUXC_GPIO_LPSR_06_GPIO_MUX6_IO06			0x018 0x058 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_06_FLEXCAN3_TX				0x018 0x058 0x0 0x6 0x0
-#define IOMUXC_GPIO_LPSR_06_PIT2_TRIGGER3			0x018 0x058 0x0 0x7 0x0
-#define IOMUXC_GPIO_LPSR_06_LPSPI5_PCS1				0x018 0x058 0x0 0x8 0x0
-#define IOMUXC_GPIO_LPSR_06_GPIO12_IO06				0x018 0x058 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_LPSR_07_LPI2C6_SCL				0x01C 0x05C 0x08C 0x0 0x0
-#define IOMUXC_GPIO_LPSR_07_SAI4_RX_BCLK			0x01C 0x05C 0x0CC 0x2 0x0
-#define IOMUXC_GPIO_LPSR_07_LPUART12_RXD			0x01C 0x05C 0x0AC 0x3 0x1
-#define IOMUXC_GPIO_LPSR_07_LPSPI6_PCS2				0x01C 0x05C 0x0 0x4 0x0
-#define IOMUXC_GPIO_LPSR_07_GPIO_MUX6_IO07			0x01C 0x05C 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_07_FLEXCAN3_RX				0x01C 0x05C 0x080 0x6 0x1
-#define IOMUXC_GPIO_LPSR_07_PIT2_TRIGGER2			0x01C 0x05C 0x0 0x7 0x0
-#define IOMUXC_GPIO_LPSR_07_LPSPI5_PCS2				0x01C 0x05C 0x0 0x8 0x0
-#define IOMUXC_GPIO_LPSR_07_GPIO12_IO07				0x01C 0x05C 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_LPSR_08_GPIO12_IO08				0x020 0x060 0x0 0xA 0x0
-#define IOMUXC_GPIO_LPSR_08_LPUART11_TXD			0x020 0x060 0x0A8 0x0 0x1
-#define IOMUXC_GPIO_LPSR_08_FLEXCAN3_TX				0x020 0x060 0x0 0x1 0x0
-#define IOMUXC_GPIO_LPSR_08_SAI4_RX_SYNC			0x020 0x060 0x0D4 0x2 0x0
-#define IOMUXC_GPIO_LPSR_08_MIC_CLK				0x020 0x060 0x0 0x3 0x0
-#define IOMUXC_GPIO_LPSR_08_LPSPI6_PCS1				0x020 0x060 0x0 0x4 0x0
-#define IOMUXC_GPIO_LPSR_08_GPIO_MUX6_IO08			0x020 0x060 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_08_LPI2C5_SDA				0x020 0x060 0x088 0x6 0x1
-#define IOMUXC_GPIO_LPSR_08_PIT2_TRIGGER1			0x020 0x060 0x0 0x7 0x0
-#define IOMUXC_GPIO_LPSR_08_LPSPI5_PCS3				0x020 0x060 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_LPSR_09_GPIO12_IO09				0x024 0x064 0x0 0xA 0x0
-#define IOMUXC_GPIO_LPSR_09_LPUART11_RXD			0x024 0x064 0x0A4 0x0 0x1
-#define IOMUXC_GPIO_LPSR_09_FLEXCAN3_RX				0x024 0x064 0x080 0x1 0x2
-#define IOMUXC_GPIO_LPSR_09_PIT2_TRIGGER0			0x024 0x064 0x0 0x2 0x0
-#define IOMUXC_GPIO_LPSR_09_MIC_BITSTREAM0			0x024 0x064 0x0B4 0x3 0x1
-#define IOMUXC_GPIO_LPSR_09_LPSPI6_PCS0				0x024 0x064 0x0 0x4 0x0
-#define IOMUXC_GPIO_LPSR_09_GPIO_MUX6_IO09			0x024 0x064 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_09_LPI2C5_SCL				0x024 0x064 0x084 0x6 0x1
-#define IOMUXC_GPIO_LPSR_09_SAI4_TX_DATA			0x024 0x064 0x0 0x7 0x0
-
-#define IOMUXC_GPIO_LPSR_10_GPIO12_IO10				0x028 0x068 0x0 0xA 0x0
-#define IOMUXC_GPIO_LPSR_10_JTAG_MUX_TRSTB			0x028 0x068 0x0 0x0 0x0
-#define IOMUXC_GPIO_LPSR_10_LPUART11_CTS_B			0x028 0x068 0x0 0x1 0x0
-#define IOMUXC_GPIO_LPSR_10_LPI2C6_SDA				0x028 0x068 0x090 0x2 0x1
-#define IOMUXC_GPIO_LPSR_10_MIC_BITSTREAM1			0x028 0x068 0x0B8 0x3 0x0
-#define IOMUXC_GPIO_LPSR_10_LPSPI6_SCK				0x028 0x068 0x0 0x4 0x0
-#define IOMUXC_GPIO_LPSR_10_GPIO_MUX6_IO10			0x028 0x068 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_10_LPI2C5_SCLS				0x028 0x068 0x0 0x6 0x0
-#define IOMUXC_GPIO_LPSR_10_SAI4_TX_SYNC			0x028 0x068 0x0DC 0x7 0x1
-#define IOMUXC_GPIO_LPSR_10_LPUART12_TXD			0x028 0x068 0x0B0 0x8 0x2
-
-#define IOMUXC_GPIO_LPSR_11_JTAG_MUX_TDO			0x02C 0x06C 0x0 0x0 0x0
-#define IOMUXC_GPIO_LPSR_11_LPUART11_RTS_B			0x02C 0x06C 0x0 0x1 0x0
-#define IOMUXC_GPIO_LPSR_11_LPI2C6_SCL				0x02C 0x06C 0x08C 0x2 0x1
-#define IOMUXC_GPIO_LPSR_11_MIC_BITSTREAM2			0x02C 0x06C 0x0BC 0x3 0x0
-#define IOMUXC_GPIO_LPSR_11_LPSPI6_SOUT				0x02C 0x06C 0x0 0x4 0x0
-#define IOMUXC_GPIO_LPSR_11_GPIO_MUX6_IO11			0x02C 0x06C 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_11_LPI2C5_SDAS				0x02C 0x06C 0x0 0x6 0x0
-#define IOMUXC_GPIO_LPSR_11_ARM_TRACE_SWO			0x02C 0x06C 0x0 0x7 0x0
-#define IOMUXC_GPIO_LPSR_11_LPUART12_RXD			0x02C 0x06C 0x0AC 0x8 0x2
-#define IOMUXC_GPIO_LPSR_11_GPIO12_IO11				0x02C 0x06C 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_LPSR_12_GPIO12_IO12				0x030 0x070 0x0 0xA 0x0
-#define IOMUXC_GPIO_LPSR_12_JTAG_MUX_TDI			0x030 0x070 0x0 0x0 0x0
-#define IOMUXC_GPIO_LPSR_12_PIT2_TRIGGER0			0x030 0x070 0x0 0x1 0x0
-#define IOMUXC_GPIO_LPSR_12_MIC_BITSTREAM3			0x030 0x070 0x0C0 0x3 0x0
-#define IOMUXC_GPIO_LPSR_12_LPSPI6_SIN				0x030 0x070 0x0 0x4 0x0
-#define IOMUXC_GPIO_LPSR_12_GPIO_MUX6_IO12			0x030 0x070 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_12_LPI2C5_HREQ				0x030 0x070 0x0 0x6 0x0
-#define IOMUXC_GPIO_LPSR_12_SAI4_TX_BCLK			0x030 0x070 0x0D8 0x7 0x1
-#define IOMUXC_GPIO_LPSR_12_LPSPI5_SCK				0x030 0x070 0x098 0x8 0x1
-
-#define IOMUXC_GPIO_LPSR_13_GPIO12_IO13				0x034 0x074 0x0 0xA 0x0
-#define IOMUXC_GPIO_LPSR_13_JTAG_MUX_MOD			0x034 0x074 0x0 0x0 0x0
-#define IOMUXC_GPIO_LPSR_13_MIC_BITSTREAM1			0x034 0x074 0x0B8 0x1 0x1
-#define IOMUXC_GPIO_LPSR_13_PIT2_TRIGGER1			0x034 0x074 0x0 0x2 0x0
-#define IOMUXC_GPIO_LPSR_13_GPIO_MUX6_IO13			0x034 0x074 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_13_SAI4_RX_DATA			0x034 0x074 0x0D0 0x7 0x1
-#define IOMUXC_GPIO_LPSR_13_LPSPI5_PCS0				0x034 0x074 0x094 0x8 0x1
-
-#define IOMUXC_GPIO_LPSR_14_JTAG_MUX_TCK			0x038 0x078 0x0 0x0 0x0
-#define IOMUXC_GPIO_LPSR_14_MIC_BITSTREAM2			0x038 0x078 0x0BC 0x1 0x1
-#define IOMUXC_GPIO_LPSR_14_PIT2_TRIGGER2			0x038 0x078 0x0 0x2 0x0
-#define IOMUXC_GPIO_LPSR_14_GPIO_MUX6_IO14			0x038 0x078 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_14_SAI4_RX_BCLK			0x038 0x078 0x0CC 0x7 0x1
-#define IOMUXC_GPIO_LPSR_14_LPSPI5_SOUT				0x038 0x078 0x0A0 0x8 0x1
-#define IOMUXC_GPIO_LPSR_14_GPIO12_IO14				0x038 0x078 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_LPSR_15_GPIO12_IO15				0x03C 0x07C 0x0 0xA 0x0
-#define IOMUXC_GPIO_LPSR_15_JTAG_MUX_TMS			0x03C 0x07C 0x0 0x0 0x0
-#define IOMUXC_GPIO_LPSR_15_MIC_BITSTREAM3			0x03C 0x07C 0x0C0 0x1 0x1
-#define IOMUXC_GPIO_LPSR_15_PIT2_TRIGGER3			0x03C 0x07C 0x0 0x2 0x0
-#define IOMUXC_GPIO_LPSR_15_GPIO_MUX6_IO15			0x03C 0x07C 0x0 0x5 0x0
-#define IOMUXC_GPIO_LPSR_15_SAI4_RX_SYNC			0x03C 0x07C 0x0D4 0x7 0x1
-#define IOMUXC_GPIO_LPSR_15_LPSPI5_SIN				0x03C 0x07C 0x09C 0x8 0x1
-
-#define IOMUXC_WAKEUP_DIG_GPIO13_IO00				0x40C94000 0x40C94040 0x0 0x5 0x0
-#define IOMUXC_WAKEUP_DIG_NMI_GLUE_NMI				0x40C94000 0x40C94040 0x0C4 0x7 0x1
-
-#define IOMUXC_PMIC_ON_REQ_DIG_SNVS_LP_PMIC_ON_REQ		0x40C94004 0x40C94044 0x0 0x0 0x0
-#define IOMUXC_PMIC_ON_REQ_DIG_GPIO13_IO01			0x40C94004 0x40C94044 0x0 0x5 0x0
-
-#define IOMUXC_PMIC_STBY_REQ_DIG_CCM_PMIC_VSTBY_REQ		0x40C94008 0x40C94048 0x0 0x0 0x0
-#define IOMUXC_PMIC_STBY_REQ_DIG_GPIO13_IO02			0x40C94008 0x40C94048 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SNVS_00_DIG_SNVS_TAMPER0			0x40C9400C 0x40C9404C 0x0 0x0 0x0
-#define IOMUXC_GPIO_SNVS_00_DIG_GPIO13_IO03			0x40C9400C 0x40C9404C 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SNVS_01_DIG_SNVS_TAMPER1			0x40C94010 0x40C94050 0x0 0x0 0x0
-#define IOMUXC_GPIO_SNVS_01_DIG_GPIO13_IO04			0x40C94010 0x40C94050 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SNVS_02_DIG_SNVS_TAMPER2			0x40C94014 0x40C94054 0x0 0x0 0x0
-#define IOMUXC_GPIO_SNVS_02_DIG_GPIO13_IO05			0x40C94014 0x40C94054 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SNVS_03_DIG_SNVS_TAMPER3			0x40C94018 0x40C94058 0x0 0x0 0x0
-#define IOMUXC_GPIO_SNVS_03_DIG_GPIO13_IO06			0x40C94018 0x40C94058 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SNVS_04_DIG_SNVS_TAMPER4			0x40C9401C 0x40C9405C 0x0 0x0 0x0
-#define IOMUXC_GPIO_SNVS_04_DIG_GPIO13_IO07			0x40C9401C 0x40C9405C 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SNVS_05_DIG_SNVS_TAMPER5			0x40C94020 0x40C94060 0x0 0x0 0x0
-#define IOMUXC_GPIO_SNVS_05_DIG_GPIO13_IO08			0x40C94020 0x40C94060 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SNVS_06_DIG_SNVS_TAMPER6			0x40C94024 0x40C94064 0x0 0x0 0x0
-#define IOMUXC_GPIO_SNVS_06_DIG_GPIO13_IO09			0x40C94024 0x40C94064 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SNVS_07_DIG_SNVS_TAMPER7			0x40C94028 0x40C94068 0x0 0x0 0x0
-#define IOMUXC_GPIO_SNVS_07_DIG_GPIO13_IO10			0x40C94028 0x40C94068 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SNVS_08_DIG_SNVS_TAMPER8			0x40C9402C 0x40C9406C 0x0 0x0 0x0
-#define IOMUXC_GPIO_SNVS_08_DIG_GPIO13_IO11			0x40C9402C 0x40C9406C 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SNVS_09_DIG_SNVS_TAMPER9			0x40C94030 0x40C94070 0x0 0x0 0x0
-#define IOMUXC_GPIO_SNVS_09_DIG_GPIO13_IO12			0x40C94030 0x40C94070 0x0 0x5 0x0
-
-#define IOMUXC_TEST_MODE_DIG					0x0 0x40C94034 0x0 0x0 0x0
-
-#define IOMUXC_POR_B_DIG					0x0 0x40C94038 0x0 0x0 0x0
-
-#define IOMUXC_ONOFF_DIG					0x0 0x40C9403C 0x0 0x0 0x0
-
-#define IOMUXC_GPIO_EMC_B1_00_SEMC_DATA00			0x010 0x254 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_00_FLEXPWM4_PWM0_A			0x010 0x254 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_00_GPIO_MUX1_IO00			0x010 0x254 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_00_FLEXIO1_D00			0x010 0x254 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_00_GPIO7_IO00			0x010 0x254 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_01_GPIO7_IO01			0x014 0x258 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_01_SEMC_DATA01			0x014 0x258 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_01_FLEXPWM4_PWM0_B			0x014 0x258 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_01_GPIO_MUX1_IO01			0x014 0x258 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_01_FLEXIO1_D01			0x014 0x258 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_EMC_B1_02_SEMC_DATA02			0x018 0x25C 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_02_FLEXPWM4_PWM1_A			0x018 0x25C 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_02_GPIO_MUX1_IO02			0x018 0x25C 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_02_FLEXIO1_D02			0x018 0x25C 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_02_GPIO7_IO02			0x018 0x25C 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_03_SEMC_DATA03			0x01C 0x260 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_03_FLEXPWM4_PWM1_B			0x01C 0x260 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_03_GPIO_MUX1_IO03			0x01C 0x260 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_03_FLEXIO1_D03			0x01C 0x260 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_03_GPIO7_IO03			0x01C 0x260 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_04_GPIO7_IO04			0x020 0x264 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_04_SEMC_DATA04			0x020 0x264 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_04_FLEXPWM4_PWM2_A			0x020 0x264 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_04_GPIO_MUX1_IO04			0x020 0x264 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_04_FLEXIO1_D04			0x020 0x264 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_EMC_B1_05_SEMC_DATA05			0x024 0x268 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_05_FLEXPWM4_PWM2_B			0x024 0x268 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_05_GPIO_MUX1_IO05			0x024 0x268 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_05_FLEXIO1_D05			0x024 0x268 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_05_GPIO7_IO05			0x024 0x268 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_06_SEMC_DATA06			0x028 0x26C 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_06_FLEXPWM2_PWM0_A			0x028 0x26C 0x518 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_06_GPIO_MUX1_IO06			0x028 0x26C 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_06_FLEXIO1_D06			0x028 0x26C 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_06_GPIO7_IO06			0x028 0x26C 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_07_GPIO7_IO07			0x02C 0x270 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_07_SEMC_DATA07			0x02C 0x270 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_07_FLEXPWM2_PWM0_B			0x02C 0x270 0x524 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_07_GPIO_MUX1_IO07			0x02C 0x270 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_07_FLEXIO1_D07			0x02C 0x270 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_EMC_B1_08_SEMC_DM00				0x030 0x274 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_08_FLEXPWM2_PWM1_A			0x030 0x274 0x51C 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_08_GPIO_MUX1_IO08			0x030 0x274 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_08_FLEXIO1_D08			0x030 0x274 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_08_GPIO7_IO08			0x030 0x274 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_09_SEMC_ADDR00			0x034 0x278 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_09_FLEXPWM2_PWM1_B			0x034 0x278 0x528 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_09_GPT5_CAPTURE1			0x034 0x278 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_09_GPIO_MUX1_IO09			0x034 0x278 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_09_FLEXIO1_D09			0x034 0x278 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_09_GPIO7_IO09			0x034 0x278 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_10_SEMC_ADDR01			0x038 0x27C 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_10_FLEXPWM2_PWM2_A			0x038 0x27C 0x520 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_10_GPT5_CAPTURE2			0x038 0x27C 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_10_GPIO_MUX1_IO10			0x038 0x27C 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_10_FLEXIO1_D10			0x038 0x27C 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_10_GPIO7_IO10			0x038 0x27C 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_11_GPIO7_IO11			0x03C 0x280 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_11_SEMC_ADDR02			0x03C 0x280 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_11_FLEXPWM2_PWM2_B			0x03C 0x280 0x52C 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_11_GPT5_COMPARE1			0x03C 0x280 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_11_GPIO_MUX1_IO11			0x03C 0x280 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_11_FLEXIO1_D11			0x03C 0x280 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_EMC_B1_12_SEMC_ADDR03			0x040 0x284 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_12_XBAR1_INOUT04			0x040 0x284 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_12_GPT5_COMPARE2			0x040 0x284 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_12_GPIO_MUX1_IO12			0x040 0x284 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_12_FLEXIO1_D12			0x040 0x284 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_12_GPIO7_IO12			0x040 0x284 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_13_SEMC_ADDR04			0x044 0x288 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_13_XBAR1_INOUT05			0x044 0x288 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_13_GPT5_COMPARE3			0x044 0x288 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_13_GPIO_MUX1_IO13			0x044 0x288 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_13_FLEXIO1_D13			0x044 0x288 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_13_GPIO7_IO13			0x044 0x288 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_14_GPIO7_IO14			0x048 0x28C 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_14_SEMC_ADDR05			0x048 0x28C 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_14_XBAR1_INOUT06			0x048 0x28C 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_14_GPT5_CLK				0x048 0x28C 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_14_GPIO_MUX1_IO14			0x048 0x28C 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_14_FLEXIO1_D14			0x048 0x28C 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_EMC_B1_15_SEMC_ADDR06			0x04C 0x290 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_15_XBAR1_INOUT07			0x04C 0x290 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_15_GPIO_MUX1_IO15			0x04C 0x290 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_15_FLEXIO1_D15			0x04C 0x290 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_15_GPIO7_IO15			0x04C 0x290 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_16_SEMC_ADDR07			0x050 0x294 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_16_XBAR1_INOUT08			0x050 0x294 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_16_GPIO_MUX1_IO16			0x050 0x294 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_16_FLEXIO1_D16			0x050 0x294 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_16_GPIO7_IO16			0x050 0x294 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_17_GPIO7_IO17			0x054 0x298 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_17_SEMC_ADDR08			0x054 0x298 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_17_FLEXPWM4_PWM3_A			0x054 0x298 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_17_TMR1_TIMER0			0x054 0x298 0x63C 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_17_GPIO_MUX1_IO17			0x054 0x298 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_17_FLEXIO1_D17			0x054 0x298 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_EMC_B1_18_SEMC_ADDR09			0x058 0x29C 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_18_FLEXPWM4_PWM3_B			0x058 0x29C 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_18_TMR2_TIMER0			0x058 0x29C 0x648 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_18_GPIO_MUX1_IO18			0x058 0x29C 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_18_FLEXIO1_D18			0x058 0x29C 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_18_GPIO7_IO18			0x058 0x29C 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_19_SEMC_ADDR11			0x05C 0x2A0 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_19_FLEXPWM2_PWM3_A			0x05C 0x2A0 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_19_TMR3_TIMER0			0x05C 0x2A0 0x654 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_19_GPIO_MUX1_IO19			0x05C 0x2A0 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_19_FLEXIO1_D19			0x05C 0x2A0 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_19_GPIO7_IO19			0x05C 0x2A0 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_20_SEMC_ADDR12			0x060 0x2A4 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_20_FLEXPWM2_PWM3_B			0x060 0x2A4 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_20_TMR4_TIMER0			0x060 0x2A4 0x660 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_20_GPIO_MUX1_IO20			0x060 0x2A4 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_20_FLEXIO1_D20			0x060 0x2A4 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_20_GPIO7_IO20			0x060 0x2A4 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_21_GPIO7_IO21			0x064 0x2A8 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_21_SEMC_BA0				0x064 0x2A8 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_21_FLEXPWM3_PWM3_A			0x064 0x2A8 0x53C 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_21_GPIO_MUX1_IO21			0x064 0x2A8 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_21_FLEXIO1_D21			0x064 0x2A8 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_EMC_B1_22_GPIO7_IO22			0x068 0x2AC 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_22_SEMC_BA1				0x068 0x2AC 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_22_FLEXPWM3_PWM3_B			0x068 0x2AC 0x54C 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_22_GPIO_MUX1_IO22			0x068 0x2AC 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_22_FLEXIO1_D22			0x068 0x2AC 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_EMC_B1_23_SEMC_ADDR10			0x06C 0x2B0 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_23_FLEXPWM1_PWM0_A			0x06C 0x2B0 0x500 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_23_GPIO_MUX1_IO23			0x06C 0x2B0 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_23_FLEXIO1_D23			0x06C 0x2B0 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_23_GPIO7_IO23			0x06C 0x2B0 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_24_GPIO7_IO24			0x070 0x2B4 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_24_SEMC_CAS				0x070 0x2B4 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_24_FLEXPWM1_PWM0_B			0x070 0x2B4 0x50C 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_24_GPIO_MUX1_IO24			0x070 0x2B4 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_24_FLEXIO1_D24			0x070 0x2B4 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_EMC_B1_25_GPIO7_IO25			0x074 0x2B8 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_25_SEMC_RAS				0x074 0x2B8 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_25_FLEXPWM1_PWM1_A			0x074 0x2B8 0x504 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_25_GPIO_MUX1_IO25			0x074 0x2B8 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_25_FLEXIO1_D25			0x074 0x2B8 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_EMC_B1_26_SEMC_CLK				0x078 0x2BC 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_26_FLEXPWM1_PWM1_B			0x078 0x2BC 0x510 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_26_GPIO_MUX1_IO26			0x078 0x2BC 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_26_FLEXIO1_D26			0x078 0x2BC 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_26_GPIO7_IO26			0x078 0x2BC 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_27_GPIO7_IO27			0x07C 0x2C0 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_27_SEMC_CKE				0x07C 0x2C0 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_27_FLEXPWM1_PWM2_A			0x07C 0x2C0 0x508 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_27_GPIO_MUX1_IO27			0x07C 0x2C0 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_27_FLEXIO1_D27			0x07C 0x2C0 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_EMC_B1_28_GPIO7_IO28			0x080 0x2C4 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_28_SEMC_WE				0x080 0x2C4 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_28_FLEXPWM1_PWM2_B			0x080 0x2C4 0x514 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_28_GPIO_MUX1_IO28			0x080 0x2C4 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_28_FLEXIO1_D28			0x080 0x2C4 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_EMC_B1_29_SEMC_CS0				0x084 0x2C8 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_29_FLEXPWM3_PWM0_A			0x084 0x2C8 0x530 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_29_GPIO_MUX1_IO29			0x084 0x2C8 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_29_FLEXIO1_D29			0x084 0x2C8 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_29_GPIO7_IO29			0x084 0x2C8 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_30_SEMC_DATA08			0x088 0x2CC 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_30_FLEXPWM3_PWM0_B			0x088 0x2CC 0x540 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_30_GPIO_MUX1_IO30			0x088 0x2CC 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_30_FLEXIO1_D30			0x088 0x2CC 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B1_30_GPIO7_IO30			0x088 0x2CC 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_31_GPIO7_IO31			0x08C 0x2D0 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_31_SEMC_DATA09			0x08C 0x2D0 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_31_FLEXPWM3_PWM1_A			0x08C 0x2D0 0x534 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_31_GPIO_MUX1_IO31			0x08C 0x2D0 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_31_FLEXIO1_D31			0x08C 0x2D0 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_EMC_B1_32_GPIO8_IO00			0x090 0x2D4 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_32_SEMC_DATA10			0x090 0x2D4 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_32_FLEXPWM3_PWM1_B			0x090 0x2D4 0x544 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_32_GPIO_MUX2_IO00			0x090 0x2D4 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_EMC_B1_33_SEMC_DATA11			0x094 0x2D8 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_33_FLEXPWM3_PWM2_A			0x094 0x2D8 0x538 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_33_GPIO_MUX2_IO01			0x094 0x2D8 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_33_GPIO8_IO01			0x094 0x2D8 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_34_GPIO8_IO02			0x098 0x2DC 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_34_SEMC_DATA12			0x098 0x2DC 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_34_FLEXPWM3_PWM2_B			0x098 0x2DC 0x548 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_34_GPIO_MUX2_IO02			0x098 0x2DC 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_EMC_B1_35_GPIO8_IO03			0x09C 0x2E0 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_35_SEMC_DATA13			0x09C 0x2E0 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_35_XBAR1_INOUT09			0x09C 0x2E0 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_35_GPIO_MUX2_IO03			0x09C 0x2E0 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_EMC_B1_36_SEMC_DATA14			0x0A0 0x2E4 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_36_XBAR1_INOUT10			0x0A0 0x2E4 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_36_GPIO_MUX2_IO04			0x0A0 0x2E4 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_36_GPIO8_IO04			0x0A0 0x2E4 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_37_GPIO8_IO05			0x0A4 0x2E8 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_37_SEMC_DATA15			0x0A4 0x2E8 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_37_XBAR1_INOUT11			0x0A4 0x2E8 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_37_GPIO_MUX2_IO05			0x0A4 0x2E8 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_EMC_B1_38_GPIO8_IO06			0x0A8 0x2EC 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_38_SEMC_DM01				0x0A8 0x2EC 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_38_FLEXPWM1_PWM3_A			0x0A8 0x2EC 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_38_TMR1_TIMER1			0x0A8 0x2EC 0x640 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_38_GPIO_MUX2_IO06			0x0A8 0x2EC 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_EMC_B1_39_SEMC_DQS				0x0AC 0x2F0 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_39_FLEXPWM1_PWM3_B			0x0AC 0x2F0 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_39_TMR2_TIMER1			0x0AC 0x2F0 0x64C 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_39_GPIO_MUX2_IO07			0x0AC 0x2F0 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_39_GPIO8_IO07			0x0AC 0x2F0 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_40_SEMC_RDY				0x0B0 0x2F4 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_40_XBAR1_INOUT12			0x0B0 0x2F4 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_40_MQS_RIGHT				0x0B0 0x2F4 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_40_LPUART6_TXD			0x0B0 0x2F4 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B1_40_GPIO_MUX2_IO08			0x0B0 0x2F4 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_40_ENET_1G_MDC			0x0B0 0x2F4 0x0 0x7 0x0
-#define IOMUXC_GPIO_EMC_B1_40_CCM_CLKO1				0x0B0 0x2F4 0x0 0x9 0x0
-#define IOMUXC_GPIO_EMC_B1_40_GPIO8_IO08			0x0B0 0x2F4 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B1_41_GPIO8_IO09			0x0B4 0x2F8 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B1_41_SEMC_CSX00			0x0B4 0x2F8 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B1_41_XBAR1_INOUT13			0x0B4 0x2F8 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B1_41_MQS_LEFT				0x0B4 0x2F8 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B1_41_LPUART6_RXD			0x0B4 0x2F8 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B1_41_FLEXSPI2_B_DATA07			0x0B4 0x2F8 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B1_41_GPIO_MUX2_IO09			0x0B4 0x2F8 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B1_41_ENET_1G_MDIO			0x0B4 0x2F8 0x4C8 0x7 0x0
-#define IOMUXC_GPIO_EMC_B1_41_CCM_CLKO2				0x0B4 0x2F8 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_EMC_B2_00_SEMC_DATA16			0x0B8 0x2FC 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_00_CCM_ENET_REF_CLK_25M		0x0B8 0x2FC 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_00_TMR3_TIMER1			0x0B8 0x2FC 0x658 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_00_LPUART6_CTS_B			0x0B8 0x2FC 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_00_FLEXSPI2_B_DATA06			0x0B8 0x2FC 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_00_GPIO_MUX2_IO10			0x0B8 0x2FC 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_00_XBAR1_INOUT20			0x0B8 0x2FC 0x6D8 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_00_ENET_QOS_1588_EVENT1_OUT		0x0B8 0x2FC 0x0 0x7 0x0
-#define IOMUXC_GPIO_EMC_B2_00_LPSPI1_SCK			0x0B8 0x2FC 0x5D0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_00_LPI2C2_SCL			0x0B8 0x2FC 0x5B4 0x9 0x0
-#define IOMUXC_GPIO_EMC_B2_00_GPIO8_IO10			0x0B8 0x2FC 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_00_FLEXPWM3_PWM0_A			0x0B8 0x2FC 0x530 0xB 0x1
-
-#define IOMUXC_GPIO_EMC_B2_01_SEMC_DATA17			0x0BC 0x300 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_01_USDHC2_CD_B			0x0BC 0x300 0x6D0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_01_TMR4_TIMER1			0x0BC 0x300 0x664 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_01_LPUART6_RTS_B			0x0BC 0x300 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_01_FLEXSPI2_B_DATA05			0x0BC 0x300 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_01_GPIO_MUX2_IO11			0x0BC 0x300 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_01_XBAR1_INOUT21			0x0BC 0x300 0x6DC 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_01_ENET_QOS_1588_EVENT1_IN		0x0BC 0x300 0x0 0x7 0x0
-#define IOMUXC_GPIO_EMC_B2_01_LPSPI1_PCS0			0x0BC 0x300 0x5CC 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_01_LPI2C2_SDA			0x0BC 0x300 0x5B8 0x9 0x0
-#define IOMUXC_GPIO_EMC_B2_01_GPIO8_IO11			0x0BC 0x300 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_01_FLEXPWM3_PWM0_B			0x0BC 0x300 0x540 0xB 0x1
-
-#define IOMUXC_GPIO_EMC_B2_02_SEMC_DATA18			0x0C0 0x304 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_02_USDHC2_WP				0x0C0 0x304 0x6D4 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_02_VIDEO_MUX_CSI_DATA23		0x0C0 0x304 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_02_FLEXSPI2_B_DATA04			0x0C0 0x304 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_02_GPIO_MUX2_IO12			0x0C0 0x304 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_02_XBAR1_INOUT22			0x0C0 0x304 0x6E0 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_02_ENET_QOS_1588_EVENT1_AUX_IN	0x0C0 0x304 0x0 0x7 0x0
-#define IOMUXC_GPIO_EMC_B2_02_LPSPI1_SOUT			0x0C0 0x304 0x5D8 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_02_GPIO8_IO12			0x0C0 0x304 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_02_FLEXPWM3_PWM1_A			0x0C0 0x304 0x534 0xB 0x1
-
-#define IOMUXC_GPIO_EMC_B2_03_SEMC_DATA19			0x0C4 0x308 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_03_USDHC2_VSELECT			0x0C4 0x308 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_03_VIDEO_MUX_CSI_DATA22		0x0C4 0x308 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_03_FLEXSPI2_B_DATA03			0x0C4 0x308 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_03_GPIO_MUX2_IO13			0x0C4 0x308 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_03_XBAR1_INOUT23			0x0C4 0x308 0x6E4 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_03_ENET_1G_TX_DATA03			0x0C4 0x308 0x0 0x7 0x0
-#define IOMUXC_GPIO_EMC_B2_03_LPSPI1_SIN			0x0C4 0x308 0x5D4 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_03_GPIO8_IO13			0x0C4 0x308 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_03_FLEXPWM3_PWM1_B			0x0C4 0x308 0x544 0xB 0x1
-
-#define IOMUXC_GPIO_EMC_B2_04_SEMC_DATA20			0x0C8 0x30C 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_04_USDHC2_RESET_B			0x0C8 0x30C 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_04_SAI2_MCLK				0x0C8 0x30C 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_04_VIDEO_MUX_CSI_DATA21		0x0C8 0x30C 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_04_FLEXSPI2_B_DATA02			0x0C8 0x30C 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_04_GPIO_MUX2_IO14			0x0C8 0x30C 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_04_XBAR1_INOUT24			0x0C8 0x30C 0x6E8 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_04_ENET_1G_TX_DATA02			0x0C8 0x30C 0x0 0x7 0x0
-#define IOMUXC_GPIO_EMC_B2_04_LPSPI3_SCK			0x0C8 0x30C 0x600 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_04_GPIO8_IO14			0x0C8 0x30C 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_04_FLEXPWM3_PWM2_A			0x0C8 0x30C 0x538 0xB 0x1
-
-#define IOMUXC_GPIO_EMC_B2_05_SEMC_DATA21			0x0CC 0x310 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_05_GPT3_CLK				0x0CC 0x310 0x598 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_05_SAI2_RX_SYNC			0x0CC 0x310 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_05_VIDEO_MUX_CSI_DATA20		0x0CC 0x310 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_05_FLEXSPI2_B_DATA01			0x0CC 0x310 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_05_GPIO_MUX2_IO15			0x0CC 0x310 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_05_XBAR1_INOUT25			0x0CC 0x310 0x6EC 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_05_ENET_1G_RX_CLK			0x0CC 0x310 0x4CC 0x7 0x0
-#define IOMUXC_GPIO_EMC_B2_05_LPSPI3_PCS0			0x0CC 0x310 0x5F0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_05_PIT1_TRIGGER0			0x0CC 0x310 0x0 0x9 0x0
-#define IOMUXC_GPIO_EMC_B2_05_GPIO8_IO15			0x0CC 0x310 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_05_FLEXPWM3_PWM2_B			0x0CC 0x310 0x548 0xB 0x1
-
-#define IOMUXC_GPIO_EMC_B2_06_SEMC_DATA22			0x0D0 0x314 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_06_GPT3_CAPTURE1			0x0D0 0x314 0x590 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_06_GPIO8_IO16			0x0D0 0x314 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_06_SAI2_RX_BCLK			0x0D0 0x314 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_06_FLEXPWM3_PWM3_A			0x0D0 0x314 0x53C 0xB 0x1
-#define IOMUXC_GPIO_EMC_B2_06_VIDEO_MUX_CSI_DATA19		0x0D0 0x314 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_06_FLEXSPI2_B_DATA00			0x0D0 0x314 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_06_GPIO_MUX2_IO16			0x0D0 0x314 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_06_XBAR1_INOUT26			0x0D0 0x314 0x6F0 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_06_ENET_1G_TX_ER			0x0D0 0x314 0x0 0x7 0x0
-#define IOMUXC_GPIO_EMC_B2_06_LPSPI3_SOUT			0x0D0 0x314 0x608 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_06_PIT1_TRIGGER1			0x0D0 0x314 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_EMC_B2_07_SEMC_DATA23			0x0D4 0x318 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_07_GPT3_CAPTURE2			0x0D4 0x318 0x594 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_07_SAI2_RX_DATA			0x0D4 0x318 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_07_VIDEO_MUX_CSI_DATA18		0x0D4 0x318 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_07_FLEXSPI2_B_DQS			0x0D4 0x318 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_07_GPIO_MUX2_IO17			0x0D4 0x318 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_07_XBAR1_INOUT27			0x0D4 0x318 0x6F4 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_07_ENET_1G_RX_DATA03			0x0D4 0x318 0x4DC 0x7 0x0
-#define IOMUXC_GPIO_EMC_B2_07_LPSPI3_SIN			0x0D4 0x318 0x604 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_07_PIT1_TRIGGER2			0x0D4 0x318 0x0 0x9 0x0
-#define IOMUXC_GPIO_EMC_B2_07_GPIO8_IO17			0x0D4 0x318 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_07_FLEXPWM3_PWM3_B			0x0D4 0x318 0x54C 0xB 0x1
-
-#define IOMUXC_GPIO_EMC_B2_08_SEMC_DM02				0x0D8 0x31C 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_08_GPT3_COMPARE1			0x0D8 0x31C 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_08_SAI2_TX_DATA			0x0D8 0x31C 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_08_VIDEO_MUX_CSI_DATA17		0x0D8 0x31C 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_08_FLEXSPI2_B_SS0_B			0x0D8 0x31C 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_08_GPIO_MUX2_IO18			0x0D8 0x31C 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_08_XBAR1_INOUT28			0x0D8 0x31C 0x6F8 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_08_ENET_1G_RX_DATA02			0x0D8 0x31C 0x4D8 0x7 0x0
-#define IOMUXC_GPIO_EMC_B2_08_LPSPI3_PCS1			0x0D8 0x31C 0x5F4 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_08_PIT1_TRIGGER3			0x0D8 0x31C 0x0 0x9 0x0
-#define IOMUXC_GPIO_EMC_B2_08_GPIO8_IO18			0x0D8 0x31C 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B2_09_GPIO8_IO19			0x0DC 0x320 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_09_SEMC_DATA24			0x0DC 0x320 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_09_GPT3_COMPARE2			0x0DC 0x320 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_09_SAI2_TX_BCLK			0x0DC 0x320 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_09_VIDEO_MUX_CSI_DATA16		0x0DC 0x320 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_09_FLEXSPI2_B_SCLK			0x0DC 0x320 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_09_GPIO_MUX2_IO19			0x0DC 0x320 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_09_XBAR1_INOUT29			0x0DC 0x320 0x6FC 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_09_ENET_1G_CRS			0x0DC 0x320 0x0 0x7 0x0
-#define IOMUXC_GPIO_EMC_B2_09_LPSPI3_PCS2			0x0DC 0x320 0x5F8 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_09_TMR1_TIMER0			0x0DC 0x320 0x63C 0x9 0x1
-
-#define IOMUXC_GPIO_EMC_B2_10_GPIO8_IO20			0x0E0 0x324 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_10_SEMC_DATA25			0x0E0 0x324 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_10_GPT3_COMPARE3			0x0E0 0x324 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_10_SAI2_TX_SYNC			0x0E0 0x324 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_10_VIDEO_MUX_CSI_FIELD		0x0E0 0x324 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_10_FLEXSPI2_A_SCLK			0x0E0 0x324 0x58C 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_10_GPIO_MUX2_IO20			0x0E0 0x324 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_10_XBAR1_INOUT30			0x0E0 0x324 0x700 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_10_ENET_1G_COL			0x0E0 0x324 0x0 0x7 0x0
-#define IOMUXC_GPIO_EMC_B2_10_LPSPI3_PCS3			0x0E0 0x324 0x5FC 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_10_TMR1_TIMER1			0x0E0 0x324 0x640 0x9 0x1
-
-#define IOMUXC_GPIO_EMC_B2_11_SEMC_DATA26			0x0E4 0x328 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_11_SPDIF_IN				0x0E4 0x328 0x6B4 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_11_ENET_1G_TX_DATA00			0x0E4 0x328 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_11_SAI3_RX_SYNC			0x0E4 0x328 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_11_FLEXSPI2_A_SS0_B			0x0E4 0x328 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_11_GPIO_MUX2_IO21			0x0E4 0x328 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_11_XBAR1_INOUT31			0x0E4 0x328 0x704 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_11_EMVSIM1_IO			0x0E4 0x328 0x69C 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_11_TMR1_TIMER2			0x0E4 0x328 0x644 0x9 0x0
-#define IOMUXC_GPIO_EMC_B2_11_GPIO8_IO21			0x0E4 0x328 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B2_12_SEMC_DATA27			0x0E8 0x32C 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_12_SPDIF_OUT				0x0E8 0x32C 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_12_ENET_1G_TX_DATA01			0x0E8 0x32C 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_12_SAI3_RX_BCLK			0x0E8 0x32C 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_12_FLEXSPI2_A_DQS			0x0E8 0x32C 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_12_GPIO_MUX2_IO22			0x0E8 0x32C 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_12_XBAR1_INOUT32			0x0E8 0x32C 0x708 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_12_EMVSIM1_CLK			0x0E8 0x32C 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_12_TMR1_TIMER3			0x0E8 0x32C 0x0 0x9 0x0
-#define IOMUXC_GPIO_EMC_B2_12_GPIO8_IO22			0x0E8 0x32C 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B2_13_GPIO8_IO23			0x0EC 0x330 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_13_SEMC_DATA28			0x0EC 0x330 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_13_ENET_1G_TX_EN			0x0EC 0x330 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_13_SAI3_RX_DATA			0x0EC 0x330 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_13_FLEXSPI2_A_DATA00			0x0EC 0x330 0x57C 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_13_GPIO_MUX2_IO23			0x0EC 0x330 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_13_XBAR1_INOUT33			0x0EC 0x330 0x70C 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_13_EMVSIM1_RST			0x0EC 0x330 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_13_TMR2_TIMER0			0x0EC 0x330 0x648 0x9 0x1
-
-#define IOMUXC_GPIO_EMC_B2_14_SEMC_DATA29			0x0F0 0x334 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_14_ENET_1G_TX_CLK_IO			0x0F0 0x334 0x4E8 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_14_SAI3_TX_DATA			0x0F0 0x334 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_14_FLEXSPI2_A_DATA01			0x0F0 0x334 0x580 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_14_GPIO_MUX2_IO24			0x0F0 0x334 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_14_XBAR1_INOUT34			0x0F0 0x334 0x710 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_14_SFA_ipp_do_atx_clk_under_test	0x0F0 0x334 0x0 0x7 0x0
-#define IOMUXC_GPIO_EMC_B2_14_EMVSIM1_SVEN			0x0F0 0x334 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_14_TMR2_TIMER1			0x0F0 0x334 0x64C 0x9 0x1
-#define IOMUXC_GPIO_EMC_B2_14_GPIO8_IO24			0x0F0 0x334 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B2_15_SEMC_DATA30			0x0F4 0x338 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_15_ENET_1G_RX_DATA00			0x0F4 0x338 0x4D0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_15_SAI3_TX_BCLK			0x0F4 0x338 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_15_FLEXSPI2_A_DATA02			0x0F4 0x338 0x584 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_15_GPIO_MUX2_IO25			0x0F4 0x338 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_15_XBAR1_INOUT35			0x0F4 0x338 0x714 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_15_EMVSIM1_PD			0x0F4 0x338 0x6A0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_15_TMR2_TIMER2			0x0F4 0x338 0x650 0x9 0x0
-#define IOMUXC_GPIO_EMC_B2_15_GPIO8_IO25			0x0F4 0x338 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B2_16_GPIO8_IO26			0x0F8 0x33C 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_16_SEMC_DATA31			0x0F8 0x33C 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_16_XBAR1_INOUT14			0x0F8 0x33C 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_16_ENET_1G_RX_DATA01			0x0F8 0x33C 0x4D4 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_16_SAI3_TX_SYNC			0x0F8 0x33C 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_16_FLEXSPI2_A_DATA03			0x0F8 0x33C 0x588 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_16_GPIO_MUX2_IO26			0x0F8 0x33C 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_16_EMVSIM1_POWER_FAIL		0x0F8 0x33C 0x6A4 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_16_TMR2_TIMER3			0x0F8 0x33C 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_EMC_B2_17_SEMC_DM03				0x0FC 0x340 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_17_XBAR1_INOUT15			0x0FC 0x340 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_17_ENET_1G_RX_EN			0x0FC 0x340 0x4E0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_17_SAI3_MCLK				0x0FC 0x340 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_17_FLEXSPI2_A_DATA04			0x0FC 0x340 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_17_GPIO_MUX2_IO27			0x0FC 0x340 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_17_WDOG1_ANY				0x0FC 0x340 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_17_TMR3_TIMER0			0x0FC 0x340 0x654 0x9 0x1
-#define IOMUXC_GPIO_EMC_B2_17_GPIO8_IO27			0x0FC 0x340 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B2_18_SEMC_DQS4				0x100 0x344 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_18_XBAR1_INOUT16			0x100 0x344 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_18_ENET_1G_RX_ER			0x100 0x344 0x4E4 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_18_EWM_OUT_B				0x100 0x344 0x0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_18_FLEXSPI2_A_DATA05			0x100 0x344 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_18_GPIO_MUX2_IO28			0x100 0x344 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_18_FLEXSPI1_A_DQS			0x100 0x344 0x550 0x6 0x0
-#define IOMUXC_GPIO_EMC_B2_18_WDOG1_B				0x100 0x344 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_18_TMR3_TIMER1			0x100 0x344 0x658 0x9 0x1
-#define IOMUXC_GPIO_EMC_B2_18_GPIO8_IO28			0x100 0x344 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_EMC_B2_19_GPIO8_IO29			0x104 0x348 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_19_SEMC_CLKX00			0x104 0x348 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_19_ENET_MDC				0x104 0x348 0x0 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_19_ENET_1G_MDC			0x104 0x348 0x0 0x2 0x0
-#define IOMUXC_GPIO_EMC_B2_19_ENET_1G_REF_CLK			0x104 0x348 0x4C4 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_19_FLEXSPI2_A_DATA06			0x104 0x348 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_19_GPIO_MUX2_IO29			0x104 0x348 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_19_ENET_QOS_MDC			0x104 0x348 0x0 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_19_TMR3_TIMER2			0x104 0x348 0x65C 0x9 0x0
-
-#define IOMUXC_GPIO_EMC_B2_20_GPIO8_IO30			0x108 0x34C 0x0 0xA 0x0
-#define IOMUXC_GPIO_EMC_B2_20_SEMC_CLKX01			0x108 0x34C 0x0 0x0 0x0
-#define IOMUXC_GPIO_EMC_B2_20_ENET_MDIO				0x108 0x34C 0x4AC 0x1 0x0
-#define IOMUXC_GPIO_EMC_B2_20_ENET_1G_MDIO			0x108 0x34C 0x4C8 0x2 0x1
-#define IOMUXC_GPIO_EMC_B2_20_ENET_QOS_REF_CLK			0x108 0x34C 0x4A0 0x3 0x0
-#define IOMUXC_GPIO_EMC_B2_20_FLEXSPI2_A_DATA07			0x108 0x34C 0x0 0x4 0x0
-#define IOMUXC_GPIO_EMC_B2_20_GPIO_MUX2_IO30			0x108 0x34C 0x0 0x5 0x0
-#define IOMUXC_GPIO_EMC_B2_20_ENET_QOS_MDIO			0x108 0x34C 0x4EC 0x8 0x0
-#define IOMUXC_GPIO_EMC_B2_20_TMR3_TIMER3			0x108 0x34C 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_AD_00_GPIO8_IO31				0x10C 0x350 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_00_EMVSIM1_IO				0x10C 0x350 0x69C 0x0 0x1
-#define IOMUXC_GPIO_AD_00_FLEXCAN2_TX				0x10C 0x350 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_00_ENET_1G_1588_EVENT1_IN		0x10C 0x350 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_00_GPT2_CAPTURE1				0x10C 0x350 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_00_FLEXPWM1_PWM0_A			0x10C 0x350 0x500 0x4 0x1
-#define IOMUXC_GPIO_AD_00_GPIO_MUX2_IO31			0x10C 0x350 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_00_LPUART7_TXD				0x10C 0x350 0x630 0x6 0x0
-#define IOMUXC_GPIO_AD_00_FLEXIO2_D00				0x10C 0x350 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_00_FLEXSPI2_B_SS1_B			0x10C 0x350 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_AD_01_GPIO9_IO00				0x110 0x354 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_01_EMVSIM1_CLK				0x110 0x354 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_01_FLEXCAN2_RX				0x110 0x354 0x49C 0x1 0x0
-#define IOMUXC_GPIO_AD_01_ENET_1G_1588_EVENT1_OUT		0x110 0x354 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_01_GPT2_CAPTURE2				0x110 0x354 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_01_FLEXPWM1_PWM0_B			0x110 0x354 0x50C 0x4 0x1
-#define IOMUXC_GPIO_AD_01_GPIO_MUX3_IO00			0x110 0x354 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_01_LPUART7_RXD				0x110 0x354 0x62C 0x6 0x0
-#define IOMUXC_GPIO_AD_01_FLEXIO2_D01				0x110 0x354 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_01_FLEXSPI2_A_SS1_B			0x110 0x354 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_AD_02_GPIO9_IO01				0x114 0x358 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_02_EMVSIM1_RST				0x114 0x358 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_02_LPUART7_CTS_B				0x114 0x358 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_02_ENET_1G_1588_EVENT2_IN		0x114 0x358 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_02_GPT2_COMPARE1				0x114 0x358 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_02_FLEXPWM1_PWM1_A			0x114 0x358 0x504 0x4 0x1
-#define IOMUXC_GPIO_AD_02_GPIO_MUX3_IO01			0x114 0x358 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_02_LPUART8_TXD				0x114 0x358 0x638 0x6 0x0
-#define IOMUXC_GPIO_AD_02_FLEXIO2_D02				0x114 0x358 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_02_VIDEO_MUX_EXT_DCIC1			0x114 0x358 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_AD_03_GPIO9_IO02				0x118 0x35C 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_03_EMVSIM1_SVEN				0x118 0x35C 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_03_LPUART7_RTS_B				0x118 0x35C 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_03_ENET_1G_1588_EVENT2_OUT		0x118 0x35C 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_03_GPT2_COMPARE2				0x118 0x35C 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_03_FLEXPWM1_PWM1_B			0x118 0x35C 0x510 0x4 0x1
-#define IOMUXC_GPIO_AD_03_GPIO_MUX3_IO02			0x118 0x35C 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_03_LPUART8_RXD				0x118 0x35C 0x634 0x6 0x0
-#define IOMUXC_GPIO_AD_03_FLEXIO2_D03				0x118 0x35C 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_03_VIDEO_MUX_EXT_DCIC2			0x118 0x35C 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_AD_04_EMVSIM1_PD				0x11C 0x360 0x6A0 0x0 0x1
-#define IOMUXC_GPIO_AD_04_LPUART8_CTS_B				0x11C 0x360 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_04_ENET_1G_1588_EVENT3_IN		0x11C 0x360 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_04_GPT2_COMPARE3				0x11C 0x360 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_04_FLEXPWM1_PWM2_A			0x11C 0x360 0x508 0x4 0x1
-#define IOMUXC_GPIO_AD_04_GPIO_MUX3_IO03			0x11C 0x360 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_04_WDOG1_B				0x11C 0x360 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_04_FLEXIO2_D04				0x11C 0x360 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_04_TMR4_TIMER0				0x11C 0x360 0x660 0x9 0x1
-#define IOMUXC_GPIO_AD_04_GPIO9_IO03				0x11C 0x360 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_AD_05_EMVSIM1_POWER_FAIL			0x120 0x364 0x6A4 0x0 0x1
-#define IOMUXC_GPIO_AD_05_LPUART8_RTS_B				0x120 0x364 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_05_ENET_1G_1588_EVENT3_OUT		0x120 0x364 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_05_GPT2_CLK				0x120 0x364 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_05_FLEXPWM1_PWM2_B			0x120 0x364 0x514 0x4 0x1
-#define IOMUXC_GPIO_AD_05_GPIO_MUX3_IO04			0x120 0x364 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_05_WDOG2_B				0x120 0x364 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_05_FLEXIO2_D05				0x120 0x364 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_05_TMR4_TIMER1				0x120 0x364 0x664 0x9 0x1
-#define IOMUXC_GPIO_AD_05_GPIO9_IO04				0x120 0x364 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_AD_06_USB_OTG2_OC				0x124 0x368 0x6B8 0x0 0x0
-#define IOMUXC_GPIO_AD_06_FLEXCAN1_TX				0x124 0x368 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_06_EMVSIM2_IO				0x124 0x368 0x6A8 0x2 0x0
-#define IOMUXC_GPIO_AD_06_GPT3_CAPTURE1				0x124 0x368 0x590 0x3 0x1
-#define IOMUXC_GPIO_AD_06_VIDEO_MUX_CSI_DATA15			0x124 0x368 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_06_GPIO_MUX3_IO05			0x124 0x368 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_06_ENET_1588_EVENT1_IN			0x124 0x368 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_06_FLEXIO2_D06				0x124 0x368 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_06_TMR4_TIMER2				0x124 0x368 0x668 0x9 0x0
-#define IOMUXC_GPIO_AD_06_GPIO9_IO05				0x124 0x368 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_06_FLEXPWM1_PWM0_X			0x124 0x368 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_07_USB_OTG2_PWR				0x128 0x36C 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_07_FLEXCAN1_RX				0x128 0x36C 0x498 0x1 0x0
-#define IOMUXC_GPIO_AD_07_EMVSIM2_CLK				0x128 0x36C 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_07_GPT3_CAPTURE2				0x128 0x36C 0x594 0x3 0x1
-#define IOMUXC_GPIO_AD_07_VIDEO_MUX_CSI_DATA14			0x128 0x36C 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_07_GPIO_MUX3_IO06			0x128 0x36C 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_07_ENET_1588_EVENT1_OUT			0x128 0x36C 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_07_FLEXIO2_D07				0x128 0x36C 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_07_TMR4_TIMER3				0x128 0x36C 0x0 0x9 0x0
-#define IOMUXC_GPIO_AD_07_GPIO9_IO06				0x128 0x36C 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_07_FLEXPWM1_PWM1_X			0x128 0x36C 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_08_USBPHY2_OTG_ID			0x12C 0x370 0x6C4 0x0 0x0
-#define IOMUXC_GPIO_AD_08_LPI2C1_SCL				0x12C 0x370 0x5AC 0x1 0x0
-#define IOMUXC_GPIO_AD_08_EMVSIM2_RST				0x12C 0x370 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_08_GPT3_COMPARE1				0x12C 0x370 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_08_VIDEO_MUX_CSI_DATA13			0x12C 0x370 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_08_GPIO_MUX3_IO07			0x12C 0x370 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_08_ENET_1588_EVENT2_IN			0x12C 0x370 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_08_FLEXIO2_D08				0x12C 0x370 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_08_GPIO9_IO07				0x12C 0x370 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_08_FLEXPWM1_PWM2_X			0x12C 0x370 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_09_USBPHY1_OTG_ID			0x130 0x374 0x6C0 0x0 0x0
-#define IOMUXC_GPIO_AD_09_LPI2C1_SDA				0x130 0x374 0x5B0 0x1 0x0
-#define IOMUXC_GPIO_AD_09_EMVSIM2_SVEN				0x130 0x374 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_09_GPT3_COMPARE2				0x130 0x374 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_09_VIDEO_MUX_CSI_DATA12			0x130 0x374 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_09_GPIO_MUX3_IO08			0x130 0x374 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_09_ENET_1588_EVENT2_OUT			0x130 0x374 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_09_FLEXIO2_D09				0x130 0x374 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_09_GPIO9_IO08				0x130 0x374 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_09_FLEXPWM1_PWM3_X			0x130 0x374 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_10_USB_OTG1_PWR				0x134 0x378 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_10_LPI2C1_SCLS				0x134 0x378 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_10_EMVSIM2_PD				0x134 0x378 0x6AC 0x2 0x0
-#define IOMUXC_GPIO_AD_10_GPT3_COMPARE3				0x134 0x378 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_10_VIDEO_MUX_CSI_DATA11			0x134 0x378 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_10_GPIO_MUX3_IO09			0x134 0x378 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_10_ENET_1588_EVENT3_IN			0x134 0x378 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_10_FLEXIO2_D10				0x134 0x378 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_10_GPIO9_IO09				0x134 0x378 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_10_FLEXPWM2_PWM0_X			0x134 0x378 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_11_USB_OTG1_OC				0x138 0x37C 0x6BC 0x0 0x0
-#define IOMUXC_GPIO_AD_11_LPI2C1_SDAS				0x138 0x37C 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_11_EMVSIM2_POWER_FAIL			0x138 0x37C 0x6B0 0x2 0x0
-#define IOMUXC_GPIO_AD_11_GPT3_CLK				0x138 0x37C 0x598 0x3 0x1
-#define IOMUXC_GPIO_AD_11_VIDEO_MUX_CSI_DATA10			0x138 0x37C 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_11_GPIO_MUX3_IO10			0x138 0x37C 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_11_ENET_1588_EVENT3_OUT			0x138 0x37C 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_11_FLEXIO2_D11				0x138 0x37C 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_11_GPIO9_IO10				0x138 0x37C 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_11_FLEXPWM2_PWM1_X			0x138 0x37C 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_12_SPDIF_LOCK				0x13C 0x380 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_12_LPI2C1_HREQ				0x13C 0x380 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_12_GPT1_CAPTURE1				0x13C 0x380 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_12_FLEXSPI1_B_DATA03			0x13C 0x380 0x570 0x3 0x0
-#define IOMUXC_GPIO_AD_12_VIDEO_MUX_CSI_PIXCLK			0x13C 0x380 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_12_GPIO_MUX3_IO11			0x13C 0x380 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_12_ENET_TX_DATA03			0x13C 0x380 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_12_FLEXIO2_D12				0x13C 0x380 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_12_EWM_OUT_B				0x13C 0x380 0x0 0x9 0x0
-#define IOMUXC_GPIO_AD_12_GPIO9_IO11				0x13C 0x380 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_12_FLEXPWM2_PWM2_X			0x13C 0x380 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_13_SPDIF_SR_CLK				0x140 0x384 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_13_PIT1_TRIGGER0				0x140 0x384 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_13_GPT1_CAPTURE2				0x140 0x384 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_13_FLEXSPI1_B_DATA02			0x140 0x384 0x56C 0x3 0x0
-#define IOMUXC_GPIO_AD_13_VIDEO_MUX_CSI_MCLK			0x140 0x384 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_13_GPIO_MUX3_IO12			0x140 0x384 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_13_ENET_TX_DATA02			0x140 0x384 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_13_FLEXIO2_D13				0x140 0x384 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_13_REF_CLK_32K				0x140 0x384 0x0 0x9 0x0
-#define IOMUXC_GPIO_AD_13_GPIO9_IO12				0x140 0x384 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_13_FLEXPWM2_PWM3_X			0x140 0x384 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_14_SPDIF_EXT_CLK				0x144 0x388 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_14_REF_CLK_24M				0x144 0x388 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_14_GPT1_COMPARE1				0x144 0x388 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_14_FLEXSPI1_B_DATA01			0x144 0x388 0x568 0x3 0x0
-#define IOMUXC_GPIO_AD_14_VIDEO_MUX_CSI_VSYNC			0x144 0x388 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_14_GPIO_MUX3_IO13			0x144 0x388 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_14_ENET_RX_CLK				0x144 0x388 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_14_FLEXIO2_D14				0x144 0x388 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_14_CCM_ENET_REF_CLK_25M			0x144 0x388 0x0 0x9 0x0
-#define IOMUXC_GPIO_AD_14_GPIO9_IO13				0x144 0x388 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_14_FLEXPWM3_PWM0_X			0x144 0x388 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_15_GPIO9_IO14				0x148 0x38C 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_15_FLEXPWM3_PWM1_X			0x148 0x38C 0x0 0xB 0x0
-#define IOMUXC_GPIO_AD_15_SPDIF_IN				0x148 0x38C 0x6B4 0x0 0x1
-#define IOMUXC_GPIO_AD_15_LPUART10_TXD				0x148 0x38C 0x628 0x1 0x0
-#define IOMUXC_GPIO_AD_15_GPT1_COMPARE2				0x148 0x38C 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_15_FLEXSPI1_B_DATA00			0x148 0x38C 0x564 0x3 0x0
-#define IOMUXC_GPIO_AD_15_VIDEO_MUX_CSI_HSYNC			0x148 0x38C 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_15_GPIO_MUX3_IO14			0x148 0x38C 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_15_ENET_TX_ER				0x148 0x38C 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_15_FLEXIO2_D15				0x148 0x38C 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_AD_16_SPDIF_OUT				0x14C 0x390 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_16_LPUART10_RXD				0x14C 0x390 0x624 0x1 0x0
-#define IOMUXC_GPIO_AD_16_GPT1_COMPARE3				0x14C 0x390 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_16_FLEXSPI1_B_SCLK			0x14C 0x390 0x578 0x3 0x0
-#define IOMUXC_GPIO_AD_16_VIDEO_MUX_CSI_DATA09			0x14C 0x390 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_16_GPIO_MUX3_IO15			0x14C 0x390 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_16_ENET_RX_DATA03			0x14C 0x390 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_16_FLEXIO2_D16				0x14C 0x390 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_16_ENET_1G_MDC				0x14C 0x390 0x0 0x9 0x0
-#define IOMUXC_GPIO_AD_16_GPIO9_IO15				0x14C 0x390 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_16_FLEXPWM3_PWM2_X			0x14C 0x390 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_17_SAI1_MCLK				0x150 0x394 0x66C 0x0 0x0
-#define IOMUXC_GPIO_AD_17_ACMP1_OUT				0x150 0x394 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_17_GPT1_CLK				0x150 0x394 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_17_FLEXSPI1_A_DQS			0x150 0x394 0x550 0x3 0x1
-#define IOMUXC_GPIO_AD_17_VIDEO_MUX_CSI_DATA08			0x150 0x394 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_17_GPIO_MUX3_IO16			0x150 0x394 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_17_ENET_RX_DATA02			0x150 0x394 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_17_FLEXIO2_D17				0x150 0x394 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_17_ENET_1G_MDIO				0x150 0x394 0x4C8 0x9 0x2
-#define IOMUXC_GPIO_AD_17_GPIO9_IO16				0x150 0x394 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_17_FLEXPWM3_PWM3_X			0x150 0x394 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_18_GPIO9_IO17				0x154 0x398 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_18_FLEXPWM4_PWM0_X			0x154 0x398 0x0 0xB 0x0
-#define IOMUXC_GPIO_AD_18_SAI1_RX_SYNC				0x154 0x398 0x678 0x0 0x0
-#define IOMUXC_GPIO_AD_18_ACMP2_OUT				0x154 0x398 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_18_LPSPI1_PCS1				0x154 0x398 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_18_FLEXSPI1_A_SS0_B			0x154 0x398 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_18_VIDEO_MUX_CSI_DATA07			0x154 0x398 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_18_GPIO_MUX3_IO17			0x154 0x398 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_18_ENET_CRS				0x154 0x398 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_18_FLEXIO2_D18				0x154 0x398 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_18_LPI2C2_SCL				0x154 0x398 0x5B4 0x9 0x1
-
-#define IOMUXC_GPIO_AD_19_SAI1_RX_BCLK				0x158 0x39C 0x670 0x0 0x0
-#define IOMUXC_GPIO_AD_19_ACMP3_OUT				0x158 0x39C 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_19_LPSPI1_PCS2				0x158 0x39C 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_19_FLEXSPI1_A_SCLK			0x158 0x39C 0x574 0x3 0x0
-#define IOMUXC_GPIO_AD_19_VIDEO_MUX_CSI_DATA06			0x158 0x39C 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_19_GPIO_MUX3_IO18			0x158 0x39C 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_19_ENET_COL				0x158 0x39C 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_19_FLEXIO2_D19				0x158 0x39C 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_19_LPI2C2_SDA				0x158 0x39C 0x5B8 0x9 0x1
-#define IOMUXC_GPIO_AD_19_GPIO9_IO18				0x158 0x39C 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_19_FLEXPWM4_PWM1_X			0x158 0x39C 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_20_SAI1_RX_DATA00			0x15C 0x3A0 0x674 0x0 0x0
-#define IOMUXC_GPIO_AD_20_ACMP4_OUT				0x15C 0x3A0 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_20_LPSPI1_PCS3				0x15C 0x3A0 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_20_FLEXSPI1_A_DATA00			0x15C 0x3A0 0x554 0x3 0x0
-#define IOMUXC_GPIO_AD_20_VIDEO_MUX_CSI_DATA05			0x15C 0x3A0 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_20_GPIO_MUX3_IO19			0x15C 0x3A0 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_20_KPP_ROW07				0x15C 0x3A0 0x5A8 0x6 0x0
-#define IOMUXC_GPIO_AD_20_FLEXIO2_D20				0x15C 0x3A0 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_20_ENET_QOS_1588_EVENT2_OUT		0x15C 0x3A0 0x0 0x9 0x0
-#define IOMUXC_GPIO_AD_20_GPIO9_IO19				0x15C 0x3A0 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_20_FLEXPWM4_PWM2_X			0x15C 0x3A0 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_21_SAI1_TX_DATA00			0x160 0x3A4 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_21_LPSPI2_PCS1				0x160 0x3A4 0x5E0 0x2 0x0
-#define IOMUXC_GPIO_AD_21_FLEXSPI1_A_DATA01			0x160 0x3A4 0x558 0x3 0x0
-#define IOMUXC_GPIO_AD_21_VIDEO_MUX_CSI_DATA04			0x160 0x3A4 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_21_GPIO_MUX3_IO20			0x160 0x3A4 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_21_KPP_COL07				0x160 0x3A4 0x5A0 0x6 0x0
-#define IOMUXC_GPIO_AD_21_FLEXIO2_D21				0x160 0x3A4 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_21_ENET_QOS_1588_EVENT2_IN		0x160 0x3A4 0x0 0x9 0x0
-#define IOMUXC_GPIO_AD_21_GPIO9_IO20				0x160 0x3A4 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_21_FLEXPWM4_PWM3_X			0x160 0x3A4 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_22_GPIO9_IO21				0x164 0x3A8 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_22_SAI1_TX_BCLK				0x164 0x3A8 0x67C 0x0 0x0
-#define IOMUXC_GPIO_AD_22_LPSPI2_PCS2				0x164 0x3A8 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_22_FLEXSPI1_A_DATA02			0x164 0x3A8 0x55C 0x3 0x0
-#define IOMUXC_GPIO_AD_22_VIDEO_MUX_CSI_DATA03			0x164 0x3A8 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_22_GPIO_MUX3_IO21			0x164 0x3A8 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_22_KPP_ROW06				0x164 0x3A8 0x5A4 0x6 0x0
-#define IOMUXC_GPIO_AD_22_FLEXIO2_D22				0x164 0x3A8 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_22_ENET_QOS_1588_EVENT3_OUT		0x164 0x3A8 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_AD_23_SAI1_TX_SYNC				0x168 0x3AC 0x680 0x0 0x0
-#define IOMUXC_GPIO_AD_23_LPSPI2_PCS3				0x168 0x3AC 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_23_FLEXSPI1_A_DATA03			0x168 0x3AC 0x560 0x3 0x0
-#define IOMUXC_GPIO_AD_23_VIDEO_MUX_CSI_DATA02			0x168 0x3AC 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_23_GPIO_MUX3_IO22			0x168 0x3AC 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_23_KPP_COL06				0x168 0x3AC 0x59C 0x6 0x0
-#define IOMUXC_GPIO_AD_23_FLEXIO2_D23				0x168 0x3AC 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_23_ENET_QOS_1588_EVENT3_IN		0x168 0x3AC 0x0 0x9 0x0
-#define IOMUXC_GPIO_AD_23_GPIO9_IO22				0x168 0x3AC 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_AD_24_LPUART1_TXD				0x16C 0x3B0 0x620 0x0 0x0
-#define IOMUXC_GPIO_AD_24_LPSPI2_SCK				0x16C 0x3B0 0x5E4 0x1 0x0
-#define IOMUXC_GPIO_AD_24_VIDEO_MUX_CSI_DATA00			0x16C 0x3B0 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_24_ENET_RX_EN				0x16C 0x3B0 0x4B8 0x3 0x0
-#define IOMUXC_GPIO_AD_24_FLEXPWM2_PWM0_A			0x16C 0x3B0 0x518 0x4 0x1
-#define IOMUXC_GPIO_AD_24_GPIO_MUX3_IO23			0x16C 0x3B0 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_24_KPP_ROW05				0x16C 0x3B0 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_24_FLEXIO2_D24				0x16C 0x3B0 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_24_LPI2C4_SCL				0x16C 0x3B0 0x5C4 0x9 0x0
-#define IOMUXC_GPIO_AD_24_GPIO9_IO23				0x16C 0x3B0 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_AD_25_GPIO9_IO24				0x170 0x3B4 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_25_LPUART1_RXD				0x170 0x3B4 0x61C 0x0 0x0
-#define IOMUXC_GPIO_AD_25_LPSPI2_PCS0				0x170 0x3B4 0x5DC 0x1 0x0
-#define IOMUXC_GPIO_AD_25_VIDEO_MUX_CSI_DATA01			0x170 0x3B4 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_25_ENET_RX_ER				0x170 0x3B4 0x4BC 0x3 0x0
-#define IOMUXC_GPIO_AD_25_FLEXPWM2_PWM0_B			0x170 0x3B4 0x524 0x4 0x1
-#define IOMUXC_GPIO_AD_25_GPIO_MUX3_IO24			0x170 0x3B4 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_25_KPP_COL05				0x170 0x3B4 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_25_FLEXIO2_D25				0x170 0x3B4 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_25_LPI2C4_SDA				0x170 0x3B4 0x5C8 0x9 0x0
-
-#define IOMUXC_GPIO_AD_26_LPUART1_CTS_B				0x174 0x3B8 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_26_LPSPI2_SOUT				0x174 0x3B8 0x5EC 0x1 0x0
-#define IOMUXC_GPIO_AD_26_SEMC_CSX01				0x174 0x3B8 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_26_ENET_RX_DATA00			0x174 0x3B8 0x4B0 0x3 0x0
-#define IOMUXC_GPIO_AD_26_FLEXPWM2_PWM1_A			0x174 0x3B8 0x51C 0x4 0x1
-#define IOMUXC_GPIO_AD_26_GPIO_MUX3_IO25			0x174 0x3B8 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_26_KPP_ROW04				0x174 0x3B8 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_26_FLEXIO2_D26				0x174 0x3B8 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_26_ENET_QOS_MDC				0x174 0x3B8 0x0 0x9 0x0
-#define IOMUXC_GPIO_AD_26_GPIO9_IO25				0x174 0x3B8 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_26_USDHC2_CD_B				0x174 0x3B8 0x6D0 0xB 0x1
-
-#define IOMUXC_GPIO_AD_27_LPUART1_RTS_B				0x178 0x3BC 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_27_LPSPI2_SIN				0x178 0x3BC 0x5E8 0x1 0x0
-#define IOMUXC_GPIO_AD_27_SEMC_CSX02				0x178 0x3BC 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_27_ENET_RX_DATA01			0x178 0x3BC 0x4B4 0x3 0x0
-#define IOMUXC_GPIO_AD_27_FLEXPWM2_PWM1_B			0x178 0x3BC 0x528 0x4 0x1
-#define IOMUXC_GPIO_AD_27_GPIO_MUX3_IO26			0x178 0x3BC 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_27_KPP_COL04				0x178 0x3BC 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_27_FLEXIO2_D27				0x178 0x3BC 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_27_ENET_QOS_MDIO				0x178 0x3BC 0x4EC 0x9 0x1
-#define IOMUXC_GPIO_AD_27_GPIO9_IO26				0x178 0x3BC 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_27_USDHC2_WP				0x178 0x3BC 0x6D4 0xB 0x1
-
-#define IOMUXC_GPIO_AD_28_GPIO9_IO27				0x17C 0x3C0 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_28_USDHC2_VSELECT			0x17C 0x3C0 0x0 0xB 0x0
-#define IOMUXC_GPIO_AD_28_LPSPI1_SCK				0x17C 0x3C0 0x5D0 0x0 0x1
-#define IOMUXC_GPIO_AD_28_LPUART5_TXD				0x17C 0x3C0 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_28_SEMC_CSX03				0x17C 0x3C0 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_28_ENET_TX_EN				0x17C 0x3C0 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_28_FLEXPWM2_PWM2_A			0x17C 0x3C0 0x520 0x4 0x1
-#define IOMUXC_GPIO_AD_28_GPIO_MUX3_IO27			0x17C 0x3C0 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_28_KPP_ROW03				0x17C 0x3C0 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_28_FLEXIO2_D28				0x17C 0x3C0 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_28_VIDEO_MUX_EXT_DCIC1			0x17C 0x3C0 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_AD_29_LPSPI1_PCS0				0x180 0x3C4 0x5CC 0x0 0x1
-#define IOMUXC_GPIO_AD_29_LPUART5_RXD				0x180 0x3C4 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_29_ENET_REF_CLK				0x180 0x3C4 0x4A8 0x2 0x0
-#define IOMUXC_GPIO_AD_29_ENET_TX_CLK				0x180 0x3C4 0x4C0 0x3 0x0
-#define IOMUXC_GPIO_AD_29_FLEXPWM2_PWM2_B			0x180 0x3C4 0x52C 0x4 0x1
-#define IOMUXC_GPIO_AD_29_GPIO_MUX3_IO28			0x180 0x3C4 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_29_KPP_COL03				0x180 0x3C4 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_29_FLEXIO2_D29				0x180 0x3C4 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_29_VIDEO_MUX_EXT_DCIC2			0x180 0x3C4 0x0 0x9 0x0
-#define IOMUXC_GPIO_AD_29_GPIO9_IO28				0x180 0x3C4 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_29_USDHC2_RESET_B			0x180 0x3C4 0x0 0xB 0x0
-
-#define IOMUXC_GPIO_AD_30_LPSPI1_SOUT				0x184 0x3C8 0x5D8 0x0 0x1
-#define IOMUXC_GPIO_AD_30_USB_OTG2_OC				0x184 0x3C8 0x6B8 0x1 0x1
-#define IOMUXC_GPIO_AD_30_FLEXCAN2_TX				0x184 0x3C8 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_30_ENET_TX_DATA00			0x184 0x3C8 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_30_LPUART3_TXD				0x184 0x3C8 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_30_GPIO_MUX3_IO29			0x184 0x3C8 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_30_KPP_ROW02				0x184 0x3C8 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_30_FLEXIO2_D30				0x184 0x3C8 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_30_WDOG2_RESET_B_DEB			0x184 0x3C8 0x0 0x9 0x0
-#define IOMUXC_GPIO_AD_30_GPIO9_IO29				0x184 0x3C8 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_AD_31_LPSPI1_SIN				0x188 0x3CC 0x5D4 0x0 0x1
-#define IOMUXC_GPIO_AD_31_USB_OTG2_PWR				0x188 0x3CC 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_31_FLEXCAN2_RX				0x188 0x3CC 0x49C 0x2 0x1
-#define IOMUXC_GPIO_AD_31_ENET_TX_DATA01			0x188 0x3CC 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_31_LPUART3_RXD				0x188 0x3CC 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_31_GPIO_MUX3_IO30			0x188 0x3CC 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_31_KPP_COL02				0x188 0x3CC 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_31_FLEXIO2_D31				0x188 0x3CC 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_31_WDOG1_RESET_B_DEB			0x188 0x3CC 0x0 0x9 0x0
-#define IOMUXC_GPIO_AD_31_GPIO9_IO30				0x188 0x3CC 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_AD_32_GPIO9_IO31				0x18C 0x3D0 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_32_LPI2C1_SCL				0x18C 0x3D0 0x5AC 0x0 0x1
-#define IOMUXC_GPIO_AD_32_USBPHY2_OTG_ID			0x18C 0x3D0 0x6C4 0x1 0x1
-#define IOMUXC_GPIO_AD_32_PGMC_PMIC_RDY				0x18C 0x3D0 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_32_ENET_MDC				0x18C 0x3D0 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_32_USDHC1_CD_B				0x18C 0x3D0 0x6C8 0x4 0x0
-#define IOMUXC_GPIO_AD_32_GPIO_MUX3_IO31			0x18C 0x3D0 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_32_KPP_ROW01				0x18C 0x3D0 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_32_LPUART10_TXD				0x18C 0x3D0 0x628 0x8 0x1
-#define IOMUXC_GPIO_AD_32_ENET_1G_MDC				0x18C 0x3D0 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_AD_33_LPI2C1_SDA				0x190 0x3D4 0x5B0 0x0 0x1
-#define IOMUXC_GPIO_AD_33_USBPHY1_OTG_ID			0x190 0x3D4 0x6C0 0x1 0x1
-#define IOMUXC_GPIO_AD_33_XBAR1_INOUT17				0x190 0x3D4 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_33_ENET_MDIO				0x190 0x3D4 0x4AC 0x3 0x1
-#define IOMUXC_GPIO_AD_33_USDHC1_WP				0x190 0x3D4 0x6CC 0x4 0x0
-#define IOMUXC_GPIO_AD_33_GPIO_MUX4_IO00			0x190 0x3D4 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_33_KPP_COL01				0x190 0x3D4 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_33_LPUART10_RXD				0x190 0x3D4 0x624 0x8 0x1
-#define IOMUXC_GPIO_AD_33_ENET_1G_MDIO				0x190 0x3D4 0x4C8 0x9 0x3
-#define IOMUXC_GPIO_AD_33_GPIO10_IO00				0x190 0x3D4 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_AD_34_ENET_1G_1588_EVENT0_IN		0x194 0x3D8 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_34_USB_OTG1_PWR				0x194 0x3D8 0x0 0x1 0x0
-#define IOMUXC_GPIO_AD_34_XBAR1_INOUT18				0x194 0x3D8 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_34_ENET_1588_EVENT0_IN			0x194 0x3D8 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_34_USDHC1_VSELECT			0x194 0x3D8 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_34_GPIO_MUX4_IO01			0x194 0x3D8 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_34_KPP_ROW00				0x194 0x3D8 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_34_LPUART10_CTS_B			0x194 0x3D8 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_34_WDOG1_ANY				0x194 0x3D8 0x0 0x9 0x0
-#define IOMUXC_GPIO_AD_34_GPIO10_IO01				0x194 0x3D8 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_AD_35_GPIO10_IO02				0x198 0x3DC 0x0 0xA 0x0
-#define IOMUXC_GPIO_AD_35_ENET_1G_1588_EVENT0_OUT		0x198 0x3DC 0x0 0x0 0x0
-#define IOMUXC_GPIO_AD_35_USB_OTG1_OC				0x198 0x3DC 0x6BC 0x1 0x1
-#define IOMUXC_GPIO_AD_35_XBAR1_INOUT19				0x198 0x3DC 0x0 0x2 0x0
-#define IOMUXC_GPIO_AD_35_ENET_1588_EVENT0_OUT			0x198 0x3DC 0x0 0x3 0x0
-#define IOMUXC_GPIO_AD_35_USDHC1_RESET_B			0x198 0x3DC 0x0 0x4 0x0
-#define IOMUXC_GPIO_AD_35_GPIO_MUX4_IO02			0x198 0x3DC 0x0 0x5 0x0
-#define IOMUXC_GPIO_AD_35_KPP_COL00				0x198 0x3DC 0x0 0x6 0x0
-#define IOMUXC_GPIO_AD_35_LPUART10_RTS_B			0x198 0x3DC 0x0 0x8 0x0
-#define IOMUXC_GPIO_AD_35_FLEXSPI1_B_SS1_B			0x198 0x3DC 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_SD_B1_00_USDHC1_CMD				0x19C 0x3E0 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B1_00_XBAR1_INOUT20			0x19C 0x3E0 0x6D8 0x2 0x1
-#define IOMUXC_GPIO_SD_B1_00_GPT4_CAPTURE1			0x19C 0x3E0 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B1_00_GPIO_MUX4_IO03			0x19C 0x3E0 0x0 0x5 0x0
-#define IOMUXC_GPIO_SD_B1_00_FLEXSPI2_A_SS0_B			0x19C 0x3E0 0x0 0x6 0x0
-#define IOMUXC_GPIO_SD_B1_00_KPP_ROW07				0x19C 0x3E0 0x5A8 0x8 0x1
-#define IOMUXC_GPIO_SD_B1_00_GPIO10_IO03			0x19C 0x3E0 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_SD_B1_01_USDHC1_CLK				0x1A0 0x3E4 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B1_01_XBAR1_INOUT21			0x1A0 0x3E4 0x6DC 0x2 0x1
-#define IOMUXC_GPIO_SD_B1_01_GPT4_CAPTURE2			0x1A0 0x3E4 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B1_01_GPIO_MUX4_IO04			0x1A0 0x3E4 0x0 0x5 0x0
-#define IOMUXC_GPIO_SD_B1_01_FLEXSPI2_A_SCLK			0x1A0 0x3E4 0x58C 0x6 0x1
-#define IOMUXC_GPIO_SD_B1_01_KPP_COL07				0x1A0 0x3E4 0x5A0 0x8 0x1
-#define IOMUXC_GPIO_SD_B1_01_GPIO10_IO04			0x1A0 0x3E4 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_SD_B1_02_GPIO10_IO05			0x1A4 0x3E8 0x0 0xA 0x0
-#define IOMUXC_GPIO_SD_B1_02_USDHC1_DATA0			0x1A4 0x3E8 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B1_02_XBAR1_INOUT22			0x1A4 0x3E8 0x6E0 0x2 0x1
-#define IOMUXC_GPIO_SD_B1_02_GPT4_COMPARE1			0x1A4 0x3E8 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B1_02_GPIO_MUX4_IO05			0x1A4 0x3E8 0x0 0x5 0x0
-#define IOMUXC_GPIO_SD_B1_02_FLEXSPI2_A_DATA00			0x1A4 0x3E8 0x57C 0x6 0x1
-#define IOMUXC_GPIO_SD_B1_02_KPP_ROW06				0x1A4 0x3E8 0x5A4 0x8 0x1
-#define IOMUXC_GPIO_SD_B1_02_FLEXSPI1_A_SS1_B			0x1A4 0x3E8 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_SD_B1_03_USDHC1_DATA1			0x1A8 0x3EC 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B1_03_XBAR1_INOUT23			0x1A8 0x3EC 0x6E4 0x2 0x1
-#define IOMUXC_GPIO_SD_B1_03_GPT4_COMPARE2			0x1A8 0x3EC 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B1_03_GPIO_MUX4_IO06			0x1A8 0x3EC 0x0 0x5 0x0
-#define IOMUXC_GPIO_SD_B1_03_FLEXSPI2_A_DATA01			0x1A8 0x3EC 0x580 0x6 0x1
-#define IOMUXC_GPIO_SD_B1_03_KPP_COL06				0x1A8 0x3EC 0x59C 0x8 0x1
-#define IOMUXC_GPIO_SD_B1_03_FLEXSPI1_B_SS1_B			0x1A8 0x3EC 0x0 0x9 0x0
-#define IOMUXC_GPIO_SD_B1_03_GPIO10_IO06			0x1A8 0x3EC 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_SD_B1_04_USDHC1_DATA2			0x1AC 0x3F0 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B1_04_XBAR1_INOUT24			0x1AC 0x3F0 0x6E8 0x2 0x1
-#define IOMUXC_GPIO_SD_B1_04_GPT4_COMPARE3			0x1AC 0x3F0 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B1_04_GPIO_MUX4_IO07			0x1AC 0x3F0 0x0 0x5 0x0
-#define IOMUXC_GPIO_SD_B1_04_FLEXSPI2_A_DATA02			0x1AC 0x3F0 0x584 0x6 0x1
-#define IOMUXC_GPIO_SD_B1_04_FLEXSPI1_B_SS0_B			0x1AC 0x3F0 0x0 0x8 0x0
-#define IOMUXC_GPIO_SD_B1_04_ENET_QOS_1588_EVENT2_AUX_IN	0x1AC 0x3F0 0x0 0x9 0x0
-#define IOMUXC_GPIO_SD_B1_04_GPIO10_IO07			0x1AC 0x3F0 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_SD_B1_05_GPIO10_IO08			0x1B0 0x3F4 0x0 0xA 0x0
-#define IOMUXC_GPIO_SD_B1_05_USDHC1_DATA3			0x1B0 0x3F4 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B1_05_XBAR1_INOUT25			0x1B0 0x3F4 0x6EC 0x2 0x1
-#define IOMUXC_GPIO_SD_B1_05_GPT4_CLK				0x1B0 0x3F4 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B1_05_GPIO_MUX4_IO08			0x1B0 0x3F4 0x0 0x5 0x0
-#define IOMUXC_GPIO_SD_B1_05_FLEXSPI2_A_DATA03			0x1B0 0x3F4 0x588 0x6 0x1
-#define IOMUXC_GPIO_SD_B1_05_FLEXSPI1_B_DQS			0x1B0 0x3F4 0x0 0x8 0x0
-#define IOMUXC_GPIO_SD_B1_05_ENET_QOS_1588_EVENT3_AUX_IN	0x1B0 0x3F4 0x0 0x9 0x0
-
-#define IOMUXC_GPIO_SD_B2_00_GPIO10_IO09			0x1B4 0x3F8 0x0 0xA 0x0
-#define IOMUXC_GPIO_SD_B2_00_USDHC2_DATA3			0x1B4 0x3F8 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B2_00_FLEXSPI1_B_DATA03			0x1B4 0x3F8 0x570 0x1 0x1
-#define IOMUXC_GPIO_SD_B2_00_ENET_1G_RX_EN			0x1B4 0x3F8 0x4E0 0x2 0x1
-#define IOMUXC_GPIO_SD_B2_00_LPUART9_TXD			0x1B4 0x3F8 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B2_00_LPSPI4_SCK				0x1B4 0x3F8 0x610 0x4 0x0
-#define IOMUXC_GPIO_SD_B2_00_GPIO_MUX4_IO09			0x1B4 0x3F8 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SD_B2_01_USDHC2_DATA2			0x1B8 0x3FC 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B2_01_FLEXSPI1_B_DATA02			0x1B8 0x3FC 0x56C 0x1 0x1
-#define IOMUXC_GPIO_SD_B2_01_ENET_1G_RX_CLK			0x1B8 0x3FC 0x4CC 0x2 0x1
-#define IOMUXC_GPIO_SD_B2_01_LPUART9_RXD			0x1B8 0x3FC 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B2_01_LPSPI4_PCS0			0x1B8 0x3FC 0x60C 0x4 0x0
-#define IOMUXC_GPIO_SD_B2_01_GPIO_MUX4_IO10			0x1B8 0x3FC 0x0 0x5 0x0
-#define IOMUXC_GPIO_SD_B2_01_GPIO10_IO10			0x1B8 0x3FC 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_SD_B2_02_GPIO10_IO11			0x1BC 0x400 0x0 0xA 0x0
-#define IOMUXC_GPIO_SD_B2_02_USDHC2_DATA1			0x1BC 0x400 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B2_02_FLEXSPI1_B_DATA01			0x1BC 0x400 0x568 0x1 0x1
-#define IOMUXC_GPIO_SD_B2_02_ENET_1G_RX_DATA00			0x1BC 0x400 0x4D0 0x2 0x1
-#define IOMUXC_GPIO_SD_B2_02_LPUART9_CTS_B			0x1BC 0x400 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B2_02_LPSPI4_SOUT			0x1BC 0x400 0x618 0x4 0x0
-#define IOMUXC_GPIO_SD_B2_02_GPIO_MUX4_IO11			0x1BC 0x400 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SD_B2_03_GPIO10_IO12			0x1C0 0x404 0x0 0xA 0x0
-#define IOMUXC_GPIO_SD_B2_03_USDHC2_DATA0			0x1C0 0x404 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B2_03_FLEXSPI1_B_DATA00			0x1C0 0x404 0x564 0x1 0x1
-#define IOMUXC_GPIO_SD_B2_03_ENET_1G_RX_DATA01			0x1C0 0x404 0x4D4 0x2 0x1
-#define IOMUXC_GPIO_SD_B2_03_LPUART9_RTS_B			0x1C0 0x404 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B2_03_LPSPI4_SIN				0x1C0 0x404 0x614 0x4 0x0
-#define IOMUXC_GPIO_SD_B2_03_GPIO_MUX4_IO12			0x1C0 0x404 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SD_B2_04_USDHC2_CLK				0x1C4 0x408 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B2_04_FLEXSPI1_B_SCLK			0x1C4 0x408 0x578 0x1 0x1
-#define IOMUXC_GPIO_SD_B2_04_ENET_1G_RX_DATA02			0x1C4 0x408 0x4D8 0x2 0x1
-#define IOMUXC_GPIO_SD_B2_04_FLEXSPI1_A_SS1_B			0x1C4 0x408 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B2_04_LPSPI4_PCS1			0x1C4 0x408 0x0 0x4 0x0
-#define IOMUXC_GPIO_SD_B2_04_GPIO_MUX4_IO13			0x1C4 0x408 0x0 0x5 0x0
-#define IOMUXC_GPIO_SD_B2_04_GPIO10_IO13			0x1C4 0x408 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_SD_B2_05_GPIO10_IO14			0x1C8 0x40C 0x0 0xA 0x0
-#define IOMUXC_GPIO_SD_B2_05_USDHC2_CMD				0x1C8 0x40C 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B2_05_FLEXSPI1_A_DQS			0x1C8 0x40C 0x550 0x1 0x2
-#define IOMUXC_GPIO_SD_B2_05_ENET_1G_RX_DATA03			0x1C8 0x40C 0x4DC 0x2 0x1
-#define IOMUXC_GPIO_SD_B2_05_FLEXSPI1_B_SS0_B			0x1C8 0x40C 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B2_05_LPSPI4_PCS2			0x1C8 0x40C 0x0 0x4 0x0
-#define IOMUXC_GPIO_SD_B2_05_GPIO_MUX4_IO14			0x1C8 0x40C 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SD_B2_06_GPIO10_IO15			0x1CC 0x410 0x0 0xA 0x0
-#define IOMUXC_GPIO_SD_B2_06_USDHC2_RESET_B			0x1CC 0x410 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B2_06_FLEXSPI1_A_SS0_B			0x1CC 0x410 0x0 0x1 0x0
-#define IOMUXC_GPIO_SD_B2_06_ENET_1G_TX_DATA03			0x1CC 0x410 0x0 0x2 0x0
-#define IOMUXC_GPIO_SD_B2_06_LPSPI4_PCS3			0x1CC 0x410 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B2_06_GPT6_CAPTURE1			0x1CC 0x410 0x0 0x4 0x0
-#define IOMUXC_GPIO_SD_B2_06_GPIO_MUX4_IO15			0x1CC 0x410 0x0 0x5 0x0
-
-#define IOMUXC_GPIO_SD_B2_07_USDHC2_STROBE			0x1D0 0x414 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B2_07_FLEXSPI1_A_SCLK			0x1D0 0x414 0x574 0x1 0x1
-#define IOMUXC_GPIO_SD_B2_07_ENET_1G_TX_DATA02			0x1D0 0x414 0x0 0x2 0x0
-#define IOMUXC_GPIO_SD_B2_07_LPUART3_CTS_B			0x1D0 0x414 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B2_07_GPT6_CAPTURE2			0x1D0 0x414 0x0 0x4 0x0
-#define IOMUXC_GPIO_SD_B2_07_GPIO_MUX4_IO16			0x1D0 0x414 0x0 0x5 0x0
-#define IOMUXC_GPIO_SD_B2_07_LPSPI2_SCK				0x1D0 0x414 0x5E4 0x6 0x1
-#define IOMUXC_GPIO_SD_B2_07_ENET_TX_ER				0x1D0 0x414 0x0 0x8 0x0
-#define IOMUXC_GPIO_SD_B2_07_ENET_QOS_REF_CLK			0x1D0 0x414 0x4A0 0x9 0x1
-#define IOMUXC_GPIO_SD_B2_07_GPIO10_IO16			0x1D0 0x414 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_SD_B2_08_GPIO10_IO17			0x1D4 0x418 0x0 0xA 0x0
-#define IOMUXC_GPIO_SD_B2_08_USDHC2_DATA4			0x1D4 0x418 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B2_08_FLEXSPI1_A_DATA00			0x1D4 0x418 0x554 0x1 0x1
-#define IOMUXC_GPIO_SD_B2_08_ENET_1G_TX_DATA01			0x1D4 0x418 0x0 0x2 0x0
-#define IOMUXC_GPIO_SD_B2_08_LPUART3_RTS_B			0x1D4 0x418 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B2_08_GPT6_COMPARE1			0x1D4 0x418 0x0 0x4 0x0
-#define IOMUXC_GPIO_SD_B2_08_GPIO_MUX4_IO17			0x1D4 0x418 0x0 0x5 0x0
-#define IOMUXC_GPIO_SD_B2_08_LPSPI2_PCS0			0x1D4 0x418 0x5DC 0x6 0x1
-
-#define IOMUXC_GPIO_SD_B2_09_GPIO10_IO18			0x1D8 0x41C 0x0 0xA 0x0
-#define IOMUXC_GPIO_SD_B2_09_USDHC2_DATA5			0x1D8 0x41C 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B2_09_FLEXSPI1_A_DATA01			0x1D8 0x41C 0x558 0x1 0x1
-#define IOMUXC_GPIO_SD_B2_09_ENET_1G_TX_DATA00			0x1D8 0x41C 0x0 0x2 0x0
-#define IOMUXC_GPIO_SD_B2_09_LPUART5_CTS_B			0x1D8 0x41C 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B2_09_GPT6_COMPARE2			0x1D8 0x41C 0x0 0x4 0x0
-#define IOMUXC_GPIO_SD_B2_09_GPIO_MUX4_IO18			0x1D8 0x41C 0x0 0x5 0x0
-#define IOMUXC_GPIO_SD_B2_09_LPSPI2_SOUT			0x1D8 0x41C 0x5EC 0x6 0x1
-
-#define IOMUXC_GPIO_SD_B2_10_GPIO10_IO19			0x1DC 0x420 0x0 0xA 0x0
-#define IOMUXC_GPIO_SD_B2_10_USDHC2_DATA6			0x1DC 0x420 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B2_10_FLEXSPI1_A_DATA02			0x1DC 0x420 0x55C 0x1 0x1
-#define IOMUXC_GPIO_SD_B2_10_ENET_1G_TX_EN			0x1DC 0x420 0x0 0x2 0x0
-#define IOMUXC_GPIO_SD_B2_10_LPUART5_RTS_B			0x1DC 0x420 0x0 0x3 0x0
-#define IOMUXC_GPIO_SD_B2_10_GPT6_COMPARE3			0x1DC 0x420 0x0 0x4 0x0
-#define IOMUXC_GPIO_SD_B2_10_GPIO_MUX4_IO19			0x1DC 0x420 0x0 0x5 0x0
-#define IOMUXC_GPIO_SD_B2_10_LPSPI2_SIN				0x1DC 0x420 0x5E8 0x6 0x1
-
-#define IOMUXC_GPIO_SD_B2_11_USDHC2_DATA7			0x1E0 0x424 0x0 0x0 0x0
-#define IOMUXC_GPIO_SD_B2_11_FLEXSPI1_A_DATA03			0x1E0 0x424 0x560 0x1 0x1
-#define IOMUXC_GPIO_SD_B2_11_ENET_1G_TX_CLK_IO			0x1E0 0x424 0x4E8 0x2 0x1
-#define IOMUXC_GPIO_SD_B2_11_ENET_1G_REF_CLK			0x1E0 0x424 0x4C4 0x3 0x1
-#define IOMUXC_GPIO_SD_B2_11_GPT6_CLK				0x1E0 0x424 0x0 0x4 0x0
-#define IOMUXC_GPIO_SD_B2_11_GPIO_MUX4_IO20			0x1E0 0x424 0x0 0x5 0x0
-#define IOMUXC_GPIO_SD_B2_11_LPSPI2_PCS1			0x1E0 0x424 0x5E0 0x6 0x1
-#define IOMUXC_GPIO_SD_B2_11_GPIO10_IO20			0x1E0 0x424 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B1_00_VIDEO_MUX_LCDIF_CLK		0x1E4 0x428 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B1_00_ENET_1G_RX_EN			0x1E4 0x428 0x4E0 0x1 0x2
-#define IOMUXC_GPIO_DISP_B1_00_TMR1_TIMER0			0x1E4 0x428 0x63C 0x3 0x2
-#define IOMUXC_GPIO_DISP_B1_00_XBAR1_INOUT26			0x1E4 0x428 0x6F0 0x4 0x1
-#define IOMUXC_GPIO_DISP_B1_00_GPIO_MUX4_IO21			0x1E4 0x428 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B1_00_ENET_QOS_RX_EN			0x1E4 0x428 0x4F8 0x8 0x0
-#define IOMUXC_GPIO_DISP_B1_00_GPIO10_IO21			0x1E4 0x428 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B1_01_VIDEO_MUX_LCDIF_ENABLE		0x1E8 0x42C 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_CLK			0x1E8 0x42C 0x4CC 0x1 0x2
-#define IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_ER			0x1E8 0x42C 0x4E4 0x2 0x1
-#define IOMUXC_GPIO_DISP_B1_01_TMR1_TIMER1			0x1E8 0x42C 0x640 0x3 0x2
-#define IOMUXC_GPIO_DISP_B1_01_XBAR1_INOUT27			0x1E8 0x42C 0x6F4 0x4 0x1
-#define IOMUXC_GPIO_DISP_B1_01_GPIO_MUX4_IO22			0x1E8 0x42C 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B1_01_ENET_QOS_RX_CLK			0x1E8 0x42C 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B1_01_ENET_QOS_RX_ER			0x1E8 0x42C 0x4FC 0x9 0x0
-#define IOMUXC_GPIO_DISP_B1_01_GPIO10_IO22			0x1E8 0x42C 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B1_02_GPIO10_IO23			0x1EC 0x430 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B1_02_VIDEO_MUX_LCDIF_HSYNC		0x1EC 0x430 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B1_02_ENET_1G_RX_DATA00		0x1EC 0x430 0x4D0 0x1 0x2
-#define IOMUXC_GPIO_DISP_B1_02_LPI2C3_SCL			0x1EC 0x430 0x5BC 0x2 0x0
-#define IOMUXC_GPIO_DISP_B1_02_TMR1_TIMER2			0x1EC 0x430 0x644 0x3 0x1
-#define IOMUXC_GPIO_DISP_B1_02_XBAR1_INOUT28			0x1EC 0x430 0x6F8 0x4 0x1
-#define IOMUXC_GPIO_DISP_B1_02_GPIO_MUX4_IO23			0x1EC 0x430 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B1_02_ENET_QOS_RX_DATA00		0x1EC 0x430 0x4F0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B1_02_LPUART1_TXD			0x1EC 0x430 0x620 0x9 0x1
-
-#define IOMUXC_GPIO_DISP_B1_03_VIDEO_MUX_LCDIF_VSYNC		0x1F0 0x434 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B1_03_ENET_1G_RX_DATA01		0x1F0 0x434 0x4D4 0x1 0x2
-#define IOMUXC_GPIO_DISP_B1_03_LPI2C3_SDA			0x1F0 0x434 0x5C0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B1_03_TMR2_TIMER0			0x1F0 0x434 0x648 0x3 0x2
-#define IOMUXC_GPIO_DISP_B1_03_XBAR1_INOUT29			0x1F0 0x434 0x6FC 0x4 0x1
-#define IOMUXC_GPIO_DISP_B1_03_GPIO_MUX4_IO24			0x1F0 0x434 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B1_03_ENET_QOS_RX_DATA01		0x1F0 0x434 0x4F4 0x8 0x0
-#define IOMUXC_GPIO_DISP_B1_03_LPUART1_RXD			0x1F0 0x434 0x61C 0x9 0x1
-#define IOMUXC_GPIO_DISP_B1_03_GPIO10_IO24			0x1F0 0x434 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B1_04_VIDEO_MUX_LCDIF_DATA00		0x1F4 0x438 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B1_04_ENET_1G_RX_DATA02		0x1F4 0x438 0x4D8 0x1 0x2
-#define IOMUXC_GPIO_DISP_B1_04_LPUART4_RXD			0x1F4 0x438 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B1_04_TMR2_TIMER1			0x1F4 0x438 0x64C 0x3 0x2
-#define IOMUXC_GPIO_DISP_B1_04_XBAR1_INOUT30			0x1F4 0x438 0x700 0x4 0x1
-#define IOMUXC_GPIO_DISP_B1_04_GPIO_MUX4_IO25			0x1F4 0x438 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B1_04_ENET_QOS_RX_DATA02		0x1F4 0x438 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B1_04_LPSPI3_SCK			0x1F4 0x438 0x600 0x9 0x1
-#define IOMUXC_GPIO_DISP_B1_04_GPIO10_IO25			0x1F4 0x438 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B1_05_GPIO10_IO26			0x1F8 0x43C 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B1_05_VIDEO_MUX_LCDIF_DATA01		0x1F8 0x43C 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B1_05_ENET_1G_RX_DATA03		0x1F8 0x43C 0x4DC 0x1 0x2
-#define IOMUXC_GPIO_DISP_B1_05_LPUART4_CTS_B			0x1F8 0x43C 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B1_05_TMR2_TIMER2			0x1F8 0x43C 0x650 0x3 0x1
-#define IOMUXC_GPIO_DISP_B1_05_XBAR1_INOUT31			0x1F8 0x43C 0x704 0x4 0x1
-#define IOMUXC_GPIO_DISP_B1_05_GPIO_MUX4_IO26			0x1F8 0x43C 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B1_05_ENET_QOS_RX_DATA03		0x1F8 0x43C 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B1_05_LPSPI3_SIN			0x1F8 0x43C 0x604 0x9 0x1
-
-#define IOMUXC_GPIO_DISP_B1_06_VIDEO_MUX_LCDIF_DATA02		0x1FC 0x440 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B1_06_ENET_1G_TX_DATA03		0x1FC 0x440 0x0 0x1 0x0
-#define IOMUXC_GPIO_DISP_B1_06_LPUART4_TXD			0x1FC 0x440 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B1_06_TMR3_TIMER0			0x1FC 0x440 0x654 0x3 0x2
-#define IOMUXC_GPIO_DISP_B1_06_XBAR1_INOUT32			0x1FC 0x440 0x708 0x4 0x1
-#define IOMUXC_GPIO_DISP_B1_06_GPIO_MUX4_IO27			0x1FC 0x440 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B1_06_SRC_BT_CFG00			0x1FC 0x440 0x0 0x6 0x0
-#define IOMUXC_GPIO_DISP_B1_06_ENET_QOS_TX_DATA03		0x1FC 0x440 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B1_06_LPSPI3_SOUT			0x1FC 0x440 0x608 0x9 0x1
-#define IOMUXC_GPIO_DISP_B1_06_GPIO10_IO27			0x1FC 0x440 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B1_07_VIDEO_MUX_LCDIF_DATA03		0x200 0x444 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B1_07_ENET_1G_TX_DATA02		0x200 0x444 0x0 0x1 0x0
-#define IOMUXC_GPIO_DISP_B1_07_LPUART4_RTS_B			0x200 0x444 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B1_07_TMR3_TIMER1			0x200 0x444 0x658 0x3 0x2
-#define IOMUXC_GPIO_DISP_B1_07_XBAR1_INOUT33			0x200 0x444 0x70C 0x4 0x1
-#define IOMUXC_GPIO_DISP_B1_07_GPIO_MUX4_IO28			0x200 0x444 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B1_07_SRC_BT_CFG01			0x200 0x444 0x0 0x6 0x0
-#define IOMUXC_GPIO_DISP_B1_07_ENET_QOS_TX_DATA02		0x200 0x444 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B1_07_LPSPI3_PCS0			0x200 0x444 0x5F0 0x9 0x1
-#define IOMUXC_GPIO_DISP_B1_07_GPIO10_IO28			0x200 0x444 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B1_08_GPIO10_IO29			0x204 0x448 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B1_08_VIDEO_MUX_LCDIF_DATA04		0x204 0x448 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B1_08_ENET_1G_TX_DATA01		0x204 0x448 0x0 0x1 0x0
-#define IOMUXC_GPIO_DISP_B1_08_USDHC1_CD_B			0x204 0x448 0x6C8 0x2 0x1
-#define IOMUXC_GPIO_DISP_B1_08_TMR3_TIMER2			0x204 0x448 0x65C 0x3 0x1
-#define IOMUXC_GPIO_DISP_B1_08_XBAR1_INOUT34			0x204 0x448 0x710 0x4 0x1
-#define IOMUXC_GPIO_DISP_B1_08_GPIO_MUX4_IO29			0x204 0x448 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B1_08_SRC_BT_CFG02			0x204 0x448 0x0 0x6 0x0
-#define IOMUXC_GPIO_DISP_B1_08_ENET_QOS_TX_DATA01		0x204 0x448 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B1_08_LPSPI3_PCS1			0x204 0x448 0x5F4 0x9 0x1
-
-#define IOMUXC_GPIO_DISP_B1_09_VIDEO_MUX_LCDIF_DATA05		0x208 0x44C 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B1_09_ENET_1G_TX_DATA00		0x208 0x44C 0x0 0x1 0x0
-#define IOMUXC_GPIO_DISP_B1_09_USDHC1_WP			0x208 0x44C 0x6CC 0x2 0x1
-#define IOMUXC_GPIO_DISP_B1_09_TMR4_TIMER0			0x208 0x44C 0x660 0x3 0x2
-#define IOMUXC_GPIO_DISP_B1_09_XBAR1_INOUT35			0x208 0x44C 0x714 0x4 0x1
-#define IOMUXC_GPIO_DISP_B1_09_GPIO_MUX4_IO30			0x208 0x44C 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B1_09_SRC_BT_CFG03			0x208 0x44C 0x0 0x6 0x0
-#define IOMUXC_GPIO_DISP_B1_09_ENET_QOS_TX_DATA00		0x208 0x44C 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B1_09_LPSPI3_PCS2			0x208 0x44C 0x5F8 0x9 0x1
-#define IOMUXC_GPIO_DISP_B1_09_GPIO10_IO30			0x208 0x44C 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B1_10_VIDEO_MUX_LCDIF_DATA06		0x20C 0x450 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B1_10_ENET_1G_TX_EN			0x20C 0x450 0x0 0x1 0x0
-#define IOMUXC_GPIO_DISP_B1_10_USDHC1_RESET_B			0x20C 0x450 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B1_10_TMR4_TIMER1			0x20C 0x450 0x664 0x3 0x2
-#define IOMUXC_GPIO_DISP_B1_10_XBAR1_INOUT36			0x20C 0x450 0x0 0x4 0x0
-#define IOMUXC_GPIO_DISP_B1_10_GPIO_MUX4_IO31			0x20C 0x450 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B1_10_SRC_BT_CFG04			0x20C 0x450 0x0 0x6 0x0
-#define IOMUXC_GPIO_DISP_B1_10_ENET_QOS_TX_EN			0x20C 0x450 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B1_10_LPSPI3_PCS3			0x20C 0x450 0x5FC 0x9 0x1
-#define IOMUXC_GPIO_DISP_B1_10_GPIO10_IO31			0x20C 0x450 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B1_11_VIDEO_MUX_LCDIF_DATA07		0x210 0x454 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B1_11_ENET_1G_TX_CLK_IO		0x210 0x454 0x4E8 0x1 0x2
-#define IOMUXC_GPIO_DISP_B1_11_ENET_1G_REF_CLK			0x210 0x454 0x4C4 0x2 0x2
-#define IOMUXC_GPIO_DISP_B1_11_TMR4_TIMER2			0x210 0x454 0x668 0x3 0x1
-#define IOMUXC_GPIO_DISP_B1_11_XBAR1_INOUT37			0x210 0x454 0x0 0x4 0x0
-#define IOMUXC_GPIO_DISP_B1_11_GPIO_MUX5_IO00			0x210 0x454 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B1_11_SRC_BT_CFG05			0x210 0x454 0x0 0x6 0x0
-#define IOMUXC_GPIO_DISP_B1_11_ENET_QOS_TX_CLK			0x210 0x454 0x4A4 0x8 0x0
-#define IOMUXC_GPIO_DISP_B1_11_ENET_QOS_REF_CLK			0x210 0x454 0x4A0 0x9 0x2
-#define IOMUXC_GPIO_DISP_B1_11_GPIO11_IO00			0x210 0x454 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B2_00_GPIO11_IO01			0x214 0x458 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B2_00_VIDEO_MUX_LCDIF_DATA08		0x214 0x458 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_00_WDOG1_B				0x214 0x458 0x0 0x1 0x0
-#define IOMUXC_GPIO_DISP_B2_00_MQS_RIGHT			0x214 0x458 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B2_00_ENET_1G_TX_ER			0x214 0x458 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_00_SAI1_TX_DATA03			0x214 0x458 0x0 0x4 0x0
-#define IOMUXC_GPIO_DISP_B2_00_GPIO_MUX5_IO01			0x214 0x458 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_00_SRC_BT_CFG06			0x214 0x458 0x0 0x6 0x0
-#define IOMUXC_GPIO_DISP_B2_00_ENET_QOS_TX_ER			0x214 0x458 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_DISP_B2_01_VIDEO_MUX_LCDIF_DATA09		0x218 0x45C 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_01_USDHC1_VSELECT			0x218 0x45C 0x0 0x1 0x0
-#define IOMUXC_GPIO_DISP_B2_01_MQS_LEFT				0x218 0x45C 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B2_01_WDOG2_B				0x218 0x45C 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_01_SAI1_TX_DATA02			0x218 0x45C 0x0 0x4 0x0
-#define IOMUXC_GPIO_DISP_B2_01_GPIO_MUX5_IO02			0x218 0x45C 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_01_SRC_BT_CFG07			0x218 0x45C 0x0 0x6 0x0
-#define IOMUXC_GPIO_DISP_B2_01_EWM_OUT_B			0x218 0x45C 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B2_01_CCM_ENET_REF_CLK_25M		0x218 0x45C 0x0 0x9 0x0
-#define IOMUXC_GPIO_DISP_B2_01_GPIO11_IO02			0x218 0x45C 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B2_02_GPIO11_IO03			0x21C 0x460 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B2_02_VIDEO_MUX_LCDIF_DATA10		0x21C 0x460 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00			0x21C 0x460 0x0 0x1 0x0
-#define IOMUXC_GPIO_DISP_B2_02_PIT1_TRIGGER3			0x21C 0x460 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B2_02_ARM_TRACE00			0x21C 0x460 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_02_SAI1_TX_DATA01			0x21C 0x460 0x0 0x4 0x0
-#define IOMUXC_GPIO_DISP_B2_02_GPIO_MUX5_IO03			0x21C 0x460 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_02_SRC_BT_CFG08			0x21C 0x460 0x0 0x6 0x0
-#define IOMUXC_GPIO_DISP_B2_02_ENET_QOS_TX_DATA00		0x21C 0x460 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_DISP_B2_03_GPIO11_IO04			0x220 0x464 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B2_03_VIDEO_MUX_LCDIF_DATA11		0x220 0x464 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01			0x220 0x464 0x0 0x1 0x0
-#define IOMUXC_GPIO_DISP_B2_03_PIT1_TRIGGER2			0x220 0x464 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B2_03_ARM_TRACE01			0x220 0x464 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_03_SAI1_MCLK			0x220 0x464 0x66C 0x4 0x1
-#define IOMUXC_GPIO_DISP_B2_03_GPIO_MUX5_IO04			0x220 0x464 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_03_SRC_BT_CFG09			0x220 0x464 0x0 0x6 0x0
-#define IOMUXC_GPIO_DISP_B2_03_ENET_QOS_TX_DATA01		0x220 0x464 0x0 0x8 0x0
-
-#define IOMUXC_GPIO_DISP_B2_04_VIDEO_MUX_LCDIF_DATA12		0x224 0x468 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN			0x224 0x468 0x0 0x1 0x0
-#define IOMUXC_GPIO_DISP_B2_04_PIT1_TRIGGER1			0x224 0x468 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B2_04_ARM_TRACE02			0x224 0x468 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_04_SAI1_RX_SYNC			0x224 0x468 0x678 0x4 0x1
-#define IOMUXC_GPIO_DISP_B2_04_GPIO_MUX5_IO05			0x224 0x468 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_04_SRC_BT_CFG10			0x224 0x468 0x0 0x6 0x0
-#define IOMUXC_GPIO_DISP_B2_04_ENET_QOS_TX_EN			0x224 0x468 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B2_04_GPIO11_IO05			0x224 0x468 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B2_05_GPIO11_IO06			0x228 0x46C 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B2_05_VIDEO_MUX_LCDIF_DATA13		0x228 0x46C 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_05_ENET_TX_CLK			0x228 0x46C 0x4C0 0x1 0x1
-#define IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK			0x228 0x46C 0x4A8 0x2 0x1
-#define IOMUXC_GPIO_DISP_B2_05_ARM_TRACE03			0x228 0x46C 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_05_SAI1_RX_BCLK			0x228 0x46C 0x670 0x4 0x1
-#define IOMUXC_GPIO_DISP_B2_05_GPIO_MUX5_IO06			0x228 0x46C 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_05_SRC_BT_CFG11			0x228 0x46C 0x0 0x6 0x0
-#define IOMUXC_GPIO_DISP_B2_05_ENET_QOS_TX_CLK			0x228 0x46C 0x4A4 0x8 0x1
-
-#define IOMUXC_GPIO_DISP_B2_06_GPIO11_IO07			0x22C 0x470 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B2_06_VIDEO_MUX_LCDIF_DATA14		0x22C 0x470 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00			0x22C 0x470 0x4B0 0x1 0x1
-#define IOMUXC_GPIO_DISP_B2_06_LPUART7_TXD			0x22C 0x470 0x630 0x2 0x1
-#define IOMUXC_GPIO_DISP_B2_06_ARM_TRACE_CLK			0x22C 0x470 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_06_SAI1_RX_DATA00			0x22C 0x470 0x674 0x4 0x1
-#define IOMUXC_GPIO_DISP_B2_06_GPIO_MUX5_IO07			0x22C 0x470 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_06_ENET_QOS_RX_DATA00		0x22C 0x470 0x4F0 0x8 0x1
-
-#define IOMUXC_GPIO_DISP_B2_07_VIDEO_MUX_LCDIF_DATA15		0x230 0x474 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01			0x230 0x474 0x4B4 0x1 0x1
-#define IOMUXC_GPIO_DISP_B2_07_LPUART7_RXD			0x230 0x474 0x62C 0x2 0x1
-#define IOMUXC_GPIO_DISP_B2_07_ARM_TRACE_SWO			0x230 0x474 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_07_SAI1_TX_DATA00			0x230 0x474 0x0 0x4 0x0
-#define IOMUXC_GPIO_DISP_B2_07_GPIO_MUX5_IO08			0x230 0x474 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_07_ENET_QOS_RX_DATA01		0x230 0x474 0x4F4 0x8 0x1
-#define IOMUXC_GPIO_DISP_B2_07_GPIO11_IO08			0x230 0x474 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B2_08_GPIO11_IO09			0x234 0x478 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B2_08_VIDEO_MUX_LCDIF_DATA16		0x234 0x478 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN			0x234 0x478 0x4B8 0x1 0x1
-#define IOMUXC_GPIO_DISP_B2_08_LPUART8_TXD			0x234 0x478 0x638 0x2 0x1
-#define IOMUXC_GPIO_DISP_B2_08_ARM_CM7_EVENTO			0x234 0x478 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_08_SAI1_TX_BCLK			0x234 0x478 0x67C 0x4 0x1
-#define IOMUXC_GPIO_DISP_B2_08_GPIO_MUX5_IO09			0x234 0x478 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_08_ENET_QOS_RX_EN			0x234 0x478 0x4F8 0x8 0x1
-#define IOMUXC_GPIO_DISP_B2_08_LPUART1_TXD			0x234 0x478 0x620 0x9 0x2
-
-#define IOMUXC_GPIO_DISP_B2_09_GPIO11_IO10			0x238 0x47C 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B2_09_VIDEO_MUX_LCDIF_DATA17		0x238 0x47C 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER			0x238 0x47C 0x4BC 0x1 0x1
-#define IOMUXC_GPIO_DISP_B2_09_LPUART8_RXD			0x238 0x47C 0x634 0x2 0x1
-#define IOMUXC_GPIO_DISP_B2_09_ARM_CM7_EVENTI			0x238 0x47C 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_09_SAI1_TX_SYNC			0x238 0x47C 0x680 0x4 0x1
-#define IOMUXC_GPIO_DISP_B2_09_GPIO_MUX5_IO10			0x238 0x47C 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_09_ENET_QOS_RX_ER			0x238 0x47C 0x4FC 0x8 0x1
-#define IOMUXC_GPIO_DISP_B2_09_LPUART1_RXD			0x238 0x47C 0x61C 0x9 0x2
-
-#define IOMUXC_GPIO_DISP_B2_10_GPIO11_IO11			0x23C 0x480 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B2_10_VIDEO_MUX_LCDIF_DATA18		0x23C 0x480 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_10_EMVSIM2_IO			0x23C 0x480 0x6A8 0x1 0x1
-#define IOMUXC_GPIO_DISP_B2_10_LPUART2_TXD			0x23C 0x480 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B2_10_WDOG2_RESET_B_DEB		0x23C 0x480 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_10_XBAR1_INOUT38			0x23C 0x480 0x0 0x4 0x0
-#define IOMUXC_GPIO_DISP_B2_10_GPIO_MUX5_IO11			0x23C 0x480 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_10_LPI2C3_SCL			0x23C 0x480 0x5BC 0x6 0x1
-#define IOMUXC_GPIO_DISP_B2_10_ENET_QOS_RX_ER			0x23C 0x480 0x4FC 0x8 0x2
-#define IOMUXC_GPIO_DISP_B2_10_SPDIF_IN				0x23C 0x480 0x6B4 0x9 0x2
-
-#define IOMUXC_GPIO_DISP_B2_11_VIDEO_MUX_LCDIF_DATA19		0x240 0x484 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_11_EMVSIM2_CLK			0x240 0x484 0x0 0x1 0x0
-#define IOMUXC_GPIO_DISP_B2_11_LPUART2_RXD			0x240 0x484 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B2_11_WDOG1_RESET_B_DEB		0x240 0x484 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_11_XBAR1_INOUT39			0x240 0x484 0x0 0x4 0x0
-#define IOMUXC_GPIO_DISP_B2_11_GPIO_MUX5_IO12			0x240 0x484 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_11_LPI2C3_SDA			0x240 0x484 0x5C0 0x6 0x1
-#define IOMUXC_GPIO_DISP_B2_11_ENET_QOS_CRS			0x240 0x484 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B2_11_SPDIF_OUT			0x240 0x484 0x0 0x9 0x0
-#define IOMUXC_GPIO_DISP_B2_11_GPIO11_IO12			0x240 0x484 0x0 0xA 0x0
-
-#define IOMUXC_GPIO_DISP_B2_12_GPIO11_IO13			0x244 0x488 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B2_12_VIDEO_MUX_LCDIF_DATA20		0x244 0x488 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_12_EMVSIM2_RST			0x244 0x488 0x0 0x1 0x0
-#define IOMUXC_GPIO_DISP_B2_12_FLEXCAN1_TX			0x244 0x488 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B2_12_LPUART2_CTS_B			0x244 0x488 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_12_XBAR1_INOUT40			0x244 0x488 0x0 0x4 0x0
-#define IOMUXC_GPIO_DISP_B2_12_GPIO_MUX5_IO13			0x244 0x488 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_12_LPI2C4_SCL			0x244 0x488 0x5C4 0x6 0x1
-#define IOMUXC_GPIO_DISP_B2_12_ENET_QOS_COL			0x244 0x488 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B2_12_LPSPI4_SCK			0x244 0x488 0x610 0x9 0x1
-
-#define IOMUXC_GPIO_DISP_B2_13_GPIO11_IO14			0x248 0x48C 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B2_13_VIDEO_MUX_LCDIF_DATA21		0x248 0x48C 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_13_EMVSIM2_SVEN			0x248 0x48C 0x0 0x1 0x0
-#define IOMUXC_GPIO_DISP_B2_13_FLEXCAN1_RX			0x248 0x48C 0x498 0x2 0x1
-#define IOMUXC_GPIO_DISP_B2_13_LPUART2_RTS_B			0x248 0x48C 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_13_ENET_REF_CLK			0x248 0x48C 0x4A8 0x4 0x2
-#define IOMUXC_GPIO_DISP_B2_13_GPIO_MUX5_IO14			0x248 0x48C 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_13_LPI2C4_SDA			0x248 0x48C 0x5C8 0x6 0x1
-#define IOMUXC_GPIO_DISP_B2_13_ENET_QOS_1588_EVENT0_OUT		0x248 0x48C 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B2_13_LPSPI4_SIN			0x248 0x48C 0x614 0x9 0x1
-
-#define IOMUXC_GPIO_DISP_B2_14_GPIO_MUX5_IO15			0x24C 0x490 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_14_FLEXCAN1_TX			0x24C 0x490 0x0 0x6 0x0
-#define IOMUXC_GPIO_DISP_B2_14_ENET_QOS_1588_EVENT0_IN		0x24C 0x490 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B2_14_LPSPI4_SOUT			0x24C 0x490 0x618 0x9 0x1
-#define IOMUXC_GPIO_DISP_B2_14_GPIO11_IO15			0x24C 0x490 0x0 0xA 0x0
-#define IOMUXC_GPIO_DISP_B2_14_VIDEO_MUX_LCDIF_DATA22		0x24C 0x490 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_14_EMVSIM2_PD			0x24C 0x490 0x6AC 0x1 0x1
-#define IOMUXC_GPIO_DISP_B2_14_WDOG2_B				0x24C 0x490 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B2_14_VIDEO_MUX_EXT_DCIC1		0x24C 0x490 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_14_ENET_1G_REF_CLK			0x24C 0x490 0x4C4 0x4 0x3
-
-#define IOMUXC_GPIO_DISP_B2_15_VIDEO_MUX_LCDIF_DATA23		0x250 0x494 0x0 0x0 0x0
-#define IOMUXC_GPIO_DISP_B2_15_EMVSIM2_POWER_FAIL		0x250 0x494 0x6B0 0x1 0x1
-#define IOMUXC_GPIO_DISP_B2_15_WDOG1_B				0x250 0x494 0x0 0x2 0x0
-#define IOMUXC_GPIO_DISP_B2_15_VIDEO_MUX_EXT_DCIC2		0x250 0x494 0x0 0x3 0x0
-#define IOMUXC_GPIO_DISP_B2_15_PIT1_TRIGGER0			0x250 0x494 0x0 0x4 0x0
-#define IOMUXC_GPIO_DISP_B2_15_GPIO_MUX5_IO16			0x250 0x494 0x0 0x5 0x0
-#define IOMUXC_GPIO_DISP_B2_15_FLEXCAN1_RX			0x250 0x494 0x498 0x6 0x2
-#define IOMUXC_GPIO_DISP_B2_15_ENET_QOS_1588_EVENT0_AUX_IN	0x250 0x494 0x0 0x8 0x0
-#define IOMUXC_GPIO_DISP_B2_15_LPSPI4_PCS0			0x250 0x494 0x60C 0x9 0x1
-#define IOMUXC_GPIO_DISP_B2_15_GPIO11_IO16			0x250 0x494 0x0 0xA 0x0
-
-#endif  /* _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H */
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
deleted file mode 100644
index 7f1c8ee9dd8ab..0000000000000
--- a/arch/arm/boot/dts/integrator.dtsi
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SoC core Device Tree for the ARM Integrator platforms
- */
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	core-module@10000000 {
-		compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
-		reg = <0x10000000 0x200>;
-		ranges = <0x0 0x10000000 0x200>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* Use core module LED to indicate CPU load */
-		led@c,0 {
-			compatible = "register-bit-led";
-			reg = <0x0c 0x04>;
-			offset = <0x0c>;
-			mask = <0x01>;
-			label = "integrator:core_module";
-			linux,default-trigger = "cpu0";
-			default-state = "on";
-		};
-	};
-
-	ebi@12000000 {
-		compatible = "arm,external-bus-interface";
-		reg = <0x12000000 0x100>;
-	};
-
-	timer@13000000 {
-		reg = <0x13000000 0x100>;
-		interrupt-parent = <&pic>;
-		interrupts = <5>;
-	};
-
-	timer@13000100 {
-		reg = <0x13000100 0x100>;
-		interrupt-parent = <&pic>;
-		interrupts = <6>;
-	};
-
-	timer@13000200 {
-		reg = <0x13000200 0x100>;
-		interrupt-parent = <&pic>;
-		interrupts = <7>;
-	};
-
-	pic@14000000 {
-		compatible = "arm,versatile-fpga-irq";
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		reg = <0x14000000 0x100>;
-		clear-mask = <0xffffffff>;
-	};
-
-	flash@24000000 {
-		compatible = "arm,versatile-flash", "cfi-flash";
-		reg = <0x24000000 0x02000000>;
-		bank-width = <4>;
-		partitions {
-			compatible = "arm,arm-firmware-suite";
-		};
-	};
-
-	fpga {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&pic>;
-
-		/*
-		 * These PrimeCells are in the same locations and using the
-		 * same interrupts in all Integrators, however the silicon
-		 * version deployed is different.
-		 */
-		rtc@15000000 {
-			reg = <0x15000000 0x1000>;
-			interrupts = <8>;
-		};
-
-		serial@16000000 {
-			reg = <0x16000000 0x1000>;
-			interrupts = <1>;
-		};
-
-		serial@17000000 {
-			reg = <0x17000000 0x1000>;
-			interrupts = <2>;
-		};
-
-		kmi@18000000 {
-			reg = <0x18000000 0x1000>;
-			interrupts = <3>;
-		};
-
-		kmi@19000000 {
-			reg = <0x19000000 0x1000>;
-			interrupts = <4>;
-		};
-
-		syscon@1a000000 {
-			/* Debug registers mapped as syscon */
-			compatible = "syscon", "simple-mfd";
-			reg = <0x1a000000 0x10>;
-			ranges = <0x0 0x1a000000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			led@4,0 {
-				compatible = "register-bit-led";
-				reg = <0x04 0x04>;
-				offset = <0x04>;
-				mask = <0x01>;
-				label = "integrator:green0";
-				linux,default-trigger = "heartbeat";
-				default-state = "on";
-			};
-			led@4,1 {
-				compatible = "register-bit-led";
-				reg = <0x04 0x04>;
-				offset = <0x04>;
-				mask = <0x02>;
-				label = "integrator:yellow";
-				default-state = "off";
-			};
-			led@4,2 {
-				compatible = "register-bit-led";
-				reg = <0x04 0x04>;
-				offset = <0x04>;
-				mask = <0x04>;
-				label = "integrator:red";
-				default-state = "off";
-			};
-			led@4,3 {
-				compatible = "register-bit-led";
-				reg = <0x04 0x04>;
-				offset = <0x04>;
-				mask = <0x08>;
-				label = "integrator:green1";
-				default-state = "off";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts
deleted file mode 100644
index 7072a70da00d9..0000000000000
--- a/arch/arm/boot/dts/integratorap-im-pd1.dts
+++ /dev/null
@@ -1,276 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree for the ARM Integrator/AP platform
- * with the IM-PD1 example logical module mounted.
- */
-
-#include "integratorap.dts"
-
-/ {
-	model = "ARM Integrator/AP with IM-PD1";
-	compatible = "arm,integrator-ap";
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		impd1_ram: vram@c2000000 {
-			/* 1 MB of designated video RAM on the IM-PD1 */
-			compatible = "shared-dma-pool";
-			reg = <0xc2000000 0x00100000>;
-			no-map;
-		};
-	};
-};
-
-&lm0 {
-	syscon@0 {
-		compatible = "arm,im-pd1-syscon", "syscon";
-		reg = <0x00000000 0x1000>;
-		ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		vco1: clock-controller@0 {
-			compatible = "arm,impd1-vco1";
-			reg = <0x00 0x04>;
-			#clock-cells = <0>;
-			lock-offset = <0x08>;
-			vco-offset = <0x00>;
-			clocks = <&sysclk>;
-			clock-output-names = "IM-PD1-VCO1";
-		};
-
-		vco2: clock-controller@4 {
-			compatible = "arm,impd1-vco2";
-			reg = <0x04 0x04>;
-			#clock-cells = <0>;
-			lock-offset = <0x08>;
-			vco-offset = <0x04>;
-			clocks = <&sysclk>;
-			clock-output-names = "IM-PD1-VCO2";
-		};
-	};
-
-	/* Also used for the Smart Card Interface SCI */
-	impd1_uartclk: clock@1_4 {
-		compatible = "fixed-factor-clock";
-		#clock-cells = <0>;
-		clock-div = <4>;
-		clock-mult = <1>;
-		clocks = <&vco2>;
-		clock-output-names = "VCO2_DIV4";
-	};
-
-	/* For the SSP the clock is divided by 64 */
-	impd1_sspclk: clock@1_64 {
-		compatible = "fixed-factor-clock";
-		#clock-cells = <0>;
-		clock-div = <64>;
-		clock-mult = <1>;
-		clocks = <&vco2>;
-		clock-output-names = "VCO2_DIV64";
-	};
-
-	/* Fixed regulator for the MMC */
-	impd1_3v3: regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	/* Push buttons on the IM-PD1 */
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@0 {
-			debounce-interval = <50>;
-			linux,code = <KEY_UP>;
-			label = "UP";
-			gpios = <&impd1_gpio1 0 GPIO_ACTIVE_HIGH>;
-		};
-		button@1 {
-			debounce-interval = <50>;
-			linux,code = <KEY_DOWN>;
-			label = "DOWN";
-			gpios = <&impd1_gpio1 1 GPIO_ACTIVE_HIGH>;
-		};
-		button@2 {
-			debounce-interval = <50>;
-			linux,code = <KEY_LEFT>;
-			label = "LEFT";
-			gpios = <&impd1_gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-		button@3 {
-			debounce-interval = <50>;
-			linux,code = <KEY_RIGHT>;
-			label = "UP";
-			gpios = <&impd1_gpio1 3 GPIO_ACTIVE_HIGH>;
-		};
-		button@4 {
-			debounce-interval = <50>;
-			linux,code = <KEY_ESC>;
-			label = "ESC";
-			gpios = <&impd1_gpio1 4 GPIO_ACTIVE_HIGH>;
-		};
-		button@5 {
-			debounce-interval = <50>;
-			linux,code = <KEY_ENTER>;
-			label = "ENTER";
-			gpios = <&impd1_gpio1 5 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-
-	bridge {
-		compatible = "ti,ths8134b", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-					vga_bridge_in: endpoint {
-					remote-endpoint = <&clcd_pads_vga_dac>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				vga_bridge_out: endpoint {
-					remote-endpoint = <&vga_con_in>;
-				};
-			};
-		};
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_con_in: endpoint {
-				remote-endpoint = <&vga_bridge_out>;
-			};
-		};
-	};
-
-	serial@100000 {
-		compatible = "arm,pl011", "arm,primecell";
-		reg = <0x00100000 0x1000>;
-		interrupts-extended = <&impd1_vic 1>;
-		clocks = <&impd1_uartclk>, <&sysclk>;
-		clock-names = "uartclk", "apb_pclk";
-	};
-
-	serial@200000 {
-		compatible = "arm,pl011", "arm,primecell";
-		reg = <0x00200000 0x1000>;
-		interrupts-extended = <&impd1_vic 2>;
-		clocks = <&impd1_uartclk>, <&sysclk>;
-		clock-names = "uartclk", "apb_pclk";
-	};
-
-	spi@300000 {
-		compatible = "arm,pl022", "arm,primecell";
-		reg = <0x00300000 0x1000>;
-		interrupts-extended = <&impd1_vic 3>;
-		clocks = <&impd1_sspclk>, <&sysclk>;
-		clock-names = "sspclk", "apb_pclk";
-	};
-
-	impd1_gpio0: gpio@400000 {
-		compatible = "arm,pl061", "arm,primecell";
-		reg = <0x00400000 0x1000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts-extended = <&impd1_vic 4>;
-		clocks = <&sysclk>;
-		clock-names = "apb_pclk";
-	};
-
-	impd1_gpio1: gpio@500000 {
-		compatible = "arm,pl061", "arm,primecell";
-		reg = <0x00500000 0x1000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts-extended = <&impd1_vic 5>;
-		clocks = <&sysclk>;
-		clock-names = "apb_pclk";
-	};
-
-	rtc@600000 {
-		compatible = "arm,pl030", "arm,primecell";
-		reg = <0x00600000 0x1000>;
-		interrupts-extended = <&impd1_vic 6>;
-		clocks = <&sysclk>;
-		clock-names = "apb_pclk";
-	};
-
-	mmc@700000 {
-		compatible = "arm,pl181", "arm,primecell";
-		reg = <0x00700000 0x1000>;
-		interrupts-extended = <&impd1_vic 7>,
-				    <&impd1_vic 8>;
-		clocks = <&sysclk>, <&sysclk>;
-		clock-names = "mclk", "apb_pclk";
-		bus-width = <1>;
-		max-frequency = <515633>;
-		vmmc-supply = <&impd1_3v3>;
-		wp-gpios = <&impd1_gpio0 3 GPIO_ACTIVE_HIGH>;
-		cd-gpios = <&impd1_gpio0 4 GPIO_ACTIVE_LOW>;
-	};
-
-	aaci@800000 {
-		compatible = "arm,pl041", "arm,primecell";
-		reg = <0x00800000 0x1000>;
-		interrupts-extended = <&impd1_vic 9>;
-		clocks = <&sysclk>;
-		clock-names = "apb_pclk";
-	};
-
-	display@1000000 {
-		compatible = "arm,pl110", "arm,primecell";
-		reg = <0x01000000 0x1000>;
-		interrupts-extended = <&impd1_vic 11>;
-		clocks = <&vco1>, <&sysclk>;
-		clock-names = "clcdclk", "apb_pclk";
-		/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
-		max-memory-bandwidth = <40000000>;
-		memory-region = <&impd1_ram>;
-		dma-ranges;
-
-		port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clcd_pads_vga_dac: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&vga_bridge_in>;
-				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-			};
-		};
-	};
-
-	impd1_vic: interrupt-controller@3000000 {
-		compatible = "arm,pl192-vic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x03000000 0x1000>;
-		/* Valid interrupts, 0-9 and 11 */
-		valid-mask = <0x00000bff>;
-		/* LM site 0 has IRQ 9 on the PIC */
-		interrupts-extended = <&pic 9>;
-	};
-};
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
deleted file mode 100644
index 5b52d75bc6bed..0000000000000
--- a/arch/arm/boot/dts/integratorap.dts
+++ /dev/null
@@ -1,295 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree for the ARM Integrator/AP platform
- */
-
-/dts-v1/;
-#include "integrator.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "ARM Integrator/AP";
-	compatible = "arm,integrator-ap";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			/*
-			 * Since the board has pluggable CPU modules, we
-			 * cannot define a proper compatible here. Let the
-			 * boot loader fill in the apropriate compatible
-			 * string if necessary.
-			 */
-			/* compatible = "arm,arm926ej-s"; */
-			reg = <0>;
-			/*
-			 * The documentation in ARM DUI 0138E page 3-12 states
-			 * that the maximum frequency for this clock is 200 MHz
-			 * but painful trial-and-error has proved to me that it
-			 * is actually just hanging the system above 71 MHz.
-			 * Sad but true.
-			 */
-					 /* kHz     uV   */
-			operating-points = <71000  0
-					    66000  0
-					    60000  0
-					    48000  0
-					    36000  0
-					    24000  0
-					    12000  0>;
-			clocks = <&cmosc>;
-			clock-names = "cpu";
-			clock-latency = <1000000>; /* 1 ms */
-		};
-	};
-
-	aliases {
-		arm,timer-primary = &timer2;
-		arm,timer-secondary = &timer1;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
-	};
-
-	/* 24 MHz chrystal on the Integrator/AP development board */
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	/* The UART clock is 14.74 MHz divided by an ICS525 */
-	uartclk: uartclk@14.74M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <14745600>;
-		clocks = <&xtal24mhz>;
-	};
-
-	core-module@10000000 {
-		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-
-		/* Oscillator on the core module, clocks the CPU core */
-		cmosc: clock-controller@8 {
-			compatible = "arm,syscon-icst525-integratorap-cm";
-			reg = <0x08 0x04>;
-			#clock-cells = <0>;
-			lock-offset = <0x14>;
-			vco-offset = <0x08>;
-			clocks = <&cm24mhz>;
-		};
-
-		/* Auxilary oscillator on the core module, 32.369MHz at boot */
-		auxosc: clock-controller@1c {
-			compatible = "arm,syscon-icst525";
-			reg = <0x1c 0x04>;
-			#clock-cells = <0>;
-			lock-offset = <0x14>;
-			vco-offset = <0x1c>;
-			clocks = <&cm24mhz>;
-		};
-	};
-
-	syscon {
-		compatible = "arm,integrator-ap-syscon", "syscon";
-		reg = <0x11000000 0x100>;
-		ranges = <0x0 0x11000000 0x100>;
-		#size-cells = <1>;
-		#address-cells = <1>;
-
-		/*
-		 * SYSCLK clocks PCIv3 bridge, system controller and the
-		 * logic modules.
-		 */
-		sysclk: clock-controller@4 {
-			compatible = "arm,syscon-icst525-integratorap-sys";
-			reg = <0x04 0x04>;
-			#clock-cells = <0>;
-			lock-offset = <0x1c>;
-			vco-offset = <0x04>;
-			clocks = <&xtal24mhz>;
-		};
-
-		/* One-bit control for the PCI bus clock (33 or 25 MHz) */
-		pciclk: clock-controller@4,8 {
-			compatible = "arm,syscon-icst525-integratorap-pci";
-			reg = <0x04 0x04>;
-			#clock-cells = <0>;
-			lock-offset = <0x1c>;
-			vco-offset = <0x04>;
-			clocks = <&xtal24mhz>;
-		};
-	};
-
-	timer0: timer@13000000 {
-		compatible = "arm,integrator-timer";
-		clocks = <&xtal24mhz>;
-	};
-
-	timer1: timer@13000100 {
-		compatible = "arm,integrator-timer";
-		clocks = <&xtal24mhz>;
-	};
-
-	timer2: timer@13000200 {
-		compatible = "arm,integrator-timer";
-		clocks = <&xtal24mhz>;
-	};
-
-	pic: pic@14000000 {
-		valid-mask = <0x003fffff>;
-	};
-
-	pci: pciv3@62000000 {
-		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		/* Bridge registers and config access space */
-		reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
-		interrupt-parent = <&pic>;
-		interrupts = <17>; /* Bus error IRQ */
-		clocks = <&pciclk>;
-		bus-range = <0x00 0xff>;
-		ranges = <0x01000000 0 0x0000000 /* I/O space @00000000 */
-			0x60000000 0 0x00010000 /* 64 KB @ LB 60000000 */
-			0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
-			0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
-			0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
-			0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
-		dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
-			0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
-			0x02000000 0 0x80000000 /* Core module alias memory */
-			0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
-		interrupt-map-mask = <0xf800 0 0 0x7>;
-		interrupt-map = <
-		/* IDSEL 9 */
-		0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
-		0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
-		0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
-		0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
-		/* IDSEL 10 */
-		0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
-		0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
-		0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
-		0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
-		/* IDSEL 11 */
-		0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
-		0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
-		0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
-		0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
-		/* IDSEL 12 */
-		0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
-		0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
-		0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
-		0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
-		>;
-	};
-
-	fpga {
-		/*
-		 * The Integator/AP predates the idea to have magic numbers
-		 * identifying the PrimeCell in hardware, thus we have to
-		 * supply these from the device tree.
-		 */
-		rtc: rtc@15000000 {
-			compatible = "arm,pl030", "arm,primecell";
-			arm,primecell-periphid = <0x00041030>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		uart0: serial@16000000 {
-			compatible = "arm,pl010", "arm,primecell";
-			arm,primecell-periphid = <0x00041010>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		uart1: serial@17000000 {
-			compatible = "arm,pl010", "arm,primecell";
-			arm,primecell-periphid = <0x00041010>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		kmi0: kmi@18000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			arm,primecell-periphid = <0x00041050>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		kmi1: kmi@19000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			arm,primecell-periphid = <0x00041050>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-	};
-
-	/*
-	 * Logic module bus, we support up to 4 logical modules
-	 * They appear at 0xc0000000, 0xd0000000, 0xe0000000 and 0xf0000000
-	 * and use interrupts 9, 10, 11 and 12 respectively.
-	 */
-	bus@c0000000 {
-		compatible = "arm,integrator-ap-lm";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0xc0000000 0xc0000000 0x40000000>;
-		dma-ranges;
-
-		lm0: bus@c0000000 {
-			compatible = "simple-bus";
-			ranges = <0x00000000 0xc0000000 0x10000000>;
-			dma-ranges = <0x00000000 0xc0000000 0x10000000>;
-			reg = <0xc0000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-		lm1: bus@d0000000 {
-			compatible = "simple-bus";
-			ranges = <0x00000000 0xd0000000 0x10000000>;
-			dma-ranges = <0x00000000 0xd0000000 0x10000000>;
-			reg = <0xd0000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-		lm2: bus@e0000000 {
-			compatible = "simple-bus";
-			ranges = <0x00000000 0xe0000000 0x10000000>;
-			dma-ranges = <0x00000000 0xe0000000 0x10000000>;
-			reg = <0xe0000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-		lm3: bus@f0000000 {
-			compatible = "simple-bus";
-			ranges = <0x00000000 0xf0000000 0x10000000>;
-			dma-ranges = <0x00000000 0xf0000000 0x10000000>;
-			reg = <0xf0000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
deleted file mode 100644
index c011333eb165d..0000000000000
--- a/arch/arm/boot/dts/integratorcp.dts
+++ /dev/null
@@ -1,322 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree for the ARM Integrator/CP platform
- */
-
-/dts-v1/;
-/include/ "integrator.dtsi"
-
-/ {
-	model = "ARM Integrator/CP";
-	compatible = "arm,integrator-cp";
-
-	chosen {
-		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			/*
-			 * Since the board has pluggable CPU modules, we
-			 * cannot define a proper compatible here. Let the
-			 * boot loader fill in the apropriate compatible
-			 * string if necessary.
-			 */
-			/* compatible = "arm,arm920t"; */
-			reg = <0>;
-			/*
-			 * TBD comment.
-			 */
-					 /* kHz     uV   */
-			operating-points = <50000  0
-					    48000  0>;
-			clocks = <&cmcore>;
-			clock-names = "cpu";
-			clock-latency = <1000000>; /* 1 ms */
-		};
-	};
-
-	/*
-	 * The Integrator/CP overall clocking architecture can be found in
-	 * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
-	 * appear to illustrate the layout used in most configurations.
-	 */
-
-	/* The codec chrystal operates at 24.576 MHz */
-	xtal_codec: xtal24.576@24.576M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24576000>;
-	};
-
-	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
-	aaci_bitclk: aaci_bitclk@12.288M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <2>;
-		clock-mult = <1>;
-		clocks = <&xtal_codec>;
-	};
-
-	/* This is a 25MHz chrystal on the base board */
-	xtal25mhz: xtal25mhz@25M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
-	uartclk: uartclk@14.74M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <14745600>;
-	};
-
-	/* Actually sysclk I think */
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	core-module@10000000 {
-		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-
-		/* Oscillator on the core module, clocks the CPU core */
-		cmcore: clock-controller@8 {
-			compatible = "arm,syscon-icst525-integratorcp-cm-core";
-			reg = <0x08 0x04>;
-			#clock-cells = <0>;
-			lock-offset = <0x14>;
-			vco-offset = <0x08>;
-			clocks = <&cm24mhz>;
-		};
-
-		/* Oscillator on the core module, clocks the memory bus */
-		cmmem: clock-controller@8,12 {
-			compatible = "arm,syscon-icst525-integratorcp-cm-mem";
-			reg = <0x08 0x04>;
-			#clock-cells = <0>;
-			lock-offset = <0x14>;
-			vco-offset = <0x08>;
-			clocks = <&cm24mhz>;
-		};
-
-		/* Auxilary oscillator on the core module, clocks the CLCD */
-		auxosc: clock-controller@1c {
-			compatible = "arm,syscon-icst525";
-			reg = <0x1c 0x04>;
-			#clock-cells = <0>;
-			lock-offset = <0x14>;
-			vco-offset = <0x1c>;
-			clocks = <&cm24mhz>;
-		};
-
-		/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
-		kmiclk: kmiclk@1M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <3>;
-			clock-mult = <1>;
-			clocks = <&cm24mhz>;
-		};
-
-		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <24>;
-			clock-mult = <1>;
-			clocks = <&cm24mhz>;
-		};
-	};
-
-	syscon {
-		compatible = "arm,integrator-cp-syscon", "syscon";
-		reg = <0xcb000000 0x100>;
-	};
-
-	timer0: timer@13000000 {
-		/* TIMER0 runs directly on the 25MHz chrystal */
-		compatible = "arm,integrator-cp-timer";
-		clocks = <&xtal25mhz>;
-	};
-
-	timer1: timer@13000100 {
-		/* TIMER1 runs @ 1MHz */
-		compatible = "arm,integrator-cp-timer";
-		clocks = <&timclk>;
-	};
-
-	timer2: timer@13000200 {
-		/* TIMER2 runs @ 1MHz */
-		compatible = "arm,integrator-cp-timer";
-		clocks = <&timclk>;
-	};
-
-	pic: pic@14000000 {
-		valid-mask = <0x1fc003ff>;
-	};
-
-	cic: cic@10000040 {
-		compatible = "arm,versatile-fpga-irq";
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		reg = <0x10000040 0x100>;
-		clear-mask = <0xffffffff>;
-		valid-mask = <0x00000007>;
-	};
-
-	/* The SIC is cascaded off IRQ 26 on the PIC */
-	sic: sic@ca000000 {
-		compatible = "arm,versatile-fpga-irq";
-		interrupt-parent = <&pic>;
-		interrupts = <26>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		reg = <0xca000000 0x100>;
-		clear-mask = <0x00000fff>;
-		valid-mask = <0x00000fff>;
-	};
-
-	ethernet@c8000000 {
-		compatible = "smsc,lan91c111";
-		reg = <0xc8000000 0x10>;
-		interrupt-parent = <&pic>;
-		interrupts = <27>;
-	};
-
-	bridge {
-		compatible = "ti,ths8134a", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				vga_bridge_in: endpoint {
-					remote-endpoint = <&clcd_pads_vga_dac>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				vga_bridge_out: endpoint {
-					remote-endpoint = <&vga_con_in>;
-				};
-			};
-		};
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_con_in: endpoint {
-				remote-endpoint = <&vga_bridge_out>;
-			};
-		};
-	};
-
-	fpga {
-		/*
-		 * These PrimeCells are at the same location and using
-		 * the same interrupts in all Integrators, but in the CP
-		 * slightly newer versions are deployed.
-		 */
-		rtc@15000000 {
-			compatible = "arm,pl031", "arm,primecell";
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		serial@16000000 {
-			compatible = "arm,pl011", "arm,primecell";
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		serial@17000000 {
-			compatible = "arm,pl011", "arm,primecell";
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		kmi@18000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		kmi@19000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		/*
-		 * These PrimeCells are only available on the Integrator/CP
-		 */
-		mmc@1c000000 {
-			compatible = "arm,pl180", "arm,primecell";
-			reg = <0x1c000000 0x1000>;
-			interrupts = <23 24>;
-			max-frequency = <515633>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "mclk", "apb_pclk";
-		};
-
-		aaci@1d000000 {
-			compatible = "arm,pl041", "arm,primecell";
-			reg = <0x1d000000 0x1000>;
-			interrupts = <25>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		clcd@c0000000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0xC0000000 0x1000>;
-			interrupts = <22>;
-			clocks = <&auxosc>, <&pclk>;
-			clock-names = "clcdclk", "apb_pclk";
-			/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
-			max-memory-bandwidth = <40000000>;
-
-			/*
-			 * This port is routed through a PLD (Programmable
-			 * Logic Device) that routes the output from the CLCD
-			 * (after transformations) to the VGA DAC and also an
-			 * external panel connector. The PLD is essential for
-			 * supporting RGB565/BGR565.
-			 *
-			 * The signals from the port thus reaches two endpoints.
-			 * The PLD is managed through a few special bits in the
-			 * FPGA "sysreg".
-			 *
-			 * This arrangement can be clearly seen in
-			 * ARM DUI 0225D, page 3-41, figure 3-19.
-			 */
-			port@0 {
-				clcd_pads_vga_dac: endpoint {
-					remote-endpoint = <&vga_bridge_in>;
-					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
deleted file mode 100644
index 765ab36e6f0c5..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for ADI Engineering Coyote platform.
- * Derived from boardfiles written by MontaVista software.
- * Ethernet set-up from OpenWrt.
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "ADI Engineering Coyote reference design";
-	compatible = "adieng,coyote", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* CHECKME: 16 MB SDRAM minimum, maybe the Coyote actually has more */
-		device_type = "memory";
-		reg = <0x00000000 0x01000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
-		stdout-path = "uart1:115200n8";
-	};
-
-	aliases {
-		/* These are switched around */
-		serial0 = &uart1;
-		serial1 = &uart0;
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/*
-				 * 32 MB of Flash in 128 0x20000 sized blocks
-				 * mapped in at CS0 and CS1
-				 */
-				reg = <0 0x00000000 0x2000000>;
-
-				/* Configure expansion bus to allow writes */
-				intel,ixp4xx-eb-write-enable = <1>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* CHECKME: guess this is Redboot FIS */
-					fis-index-block = <0x1ff>;
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * Taken from Coyote PCI boardfile.
-			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
-			 * each handling all IRQs.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 6 */
-			<0x0800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 6 */
-			<0x0800 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 6 */
-			<0x0800 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 6 */
-			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
-			<0x1000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 11 */
-			<0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
-			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 11 */
-		};
-
-		/* EthB */
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy4: ethernet-phy@4 {
-					reg = <4>;
-				};
-
-				phy5: ethernet-phy@5 {
-					reg = <5>;
-				};
-			};
-		};
-
-		/* EthC */
-		ethernet@c800a000 {
-			status = "okay";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy4>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
deleted file mode 100644
index 6f5b4e4eb1ccb..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
+++ /dev/null
@@ -1,169 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for the Arcom/Eurotech Vulcan board.
- * This board is a single board computer in the PC/104 form factor based on
- * IXP425, and was released around 2005. It previously had the name "Mercury".
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Arcom/Eurotech Vulcan";
-	compatible = "arcom,vulcan", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	chosen {
-		/* CHECKME: using a harddrive at /dev/sda1 as rootfs by default */
-		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
-		stdout-path = "uart0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/*
-				 * 32 MB of Flash in 0x20000 byte blocks
-				 * mapped in at CS0 and CS1.
-				 *
-				 * The documentation mentions the existence
-				 * of a 16MB version, which we conveniently
-				 * ignore. Shout if you own one!
-				 */
-				reg = <0 0x00000000 0x2000000>;
-
-				/* Expansion bus settings */
-				intel,ixp4xx-eb-t3 = <3>;
-				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
-				intel,ixp4xx-eb-write-enable = <1>;
-
-				partitions {
-					compatible = "redboot-fis";
-					fis-index-block = <0x1ff>;
-				};
-			};
-			sram@2,0 {
-				/* 256 KB SDRAM memory at CS2 */
-				compatible = "shared-dma-pool";
-				device_type = "memory";
-				reg = <2 0x00000000 0x40000>;
-				no-map;
-				/* Expansion bus settings */
-				intel,ixp4xx-eb-t3 = <1>;
-				intel,ixp4xx-eb-t4 = <2>;
-				intel,ixp4xx-eb-ahb-split-transfers = <1>;
-				intel,ixp4xx-eb-write-enable = <1>;
-				intel,ixp4xx-eb-byte-access = <1>;
-			};
-			serial@3,0 {
-				/*
-				 * 8250-compatible Exar XR16L2551 2 x UART
-				 *
-				 * CHECKME: if special tweaks are needed, then fix the
-				 * operating system to handle it.
-				 */
-				compatible = "exar,xr16l2551", "ns8250";
-				reg = <3 0x00000000 0x10>;
-				interrupt-parent = <&gpio0>;
-				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-				clock-frequency = <1843200>;
-				/* Expansion bus settings */
-				intel,ixp4xx-eb-t3 = <3>;
-				intel,ixp4xx-eb-cycle-type = <1>; /* Motorola cycles */
-				intel,ixp4xx-eb-write-enable = <1>;
-				intel,ixp4xx-eb-byte-access = <1>;
-			};
-			gpio1: gpio@4,0 {
-				/*
-				 * MMIO GPIO in one byte
-				 */
-				compatible = "arcom,vulcan-gpio";
-				reg = <4 0x00000000 0x1>;
-				/* Expansion bus settings */
-				intel,ixp4xx-eb-write-enable = <1>;
-				intel,ixp4xx-eb-byte-access = <1>;
-			};
-			watchdog@5,0 {
-				compatible = "maxim,max6369";
-				reg = <5 0x00000000 0x1>;
-				/* Expansion bus settings */
-				intel,ixp4xx-eb-write-enable = <1>;
-				intel,ixp4xx-eb-byte-access = <1>;
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * Taken from Vulcan PCI boardfile.
-			 *
-			 * We have 2 slots (IDSEL) 1 and 2 with one dedicated interrupt
-			 * per slot. This interrupt is shared (OR:ed) by all four pins.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 2 */
-			<0x0800 0 0 2 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 2 */
-			<0x0800 0 0 3 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 2 */
-			<0x0800 0 0 4 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 2 */
-			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 3 */
-			<0x1000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 3 */
-			<0x1000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 3 */
-			<0x1000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 3 */
-		};
-
-		/* EthB */
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-		};
-
-		/* EthC */
-		ethernet@c800a000 {
-			status = "okay";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
deleted file mode 100644
index b9d46eb065078..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for D-Link DSM-G600 revision A based on IXP420
- * NOTE: revision B of this device uses PowerPC and is NOT supported by
- * this device tree.
- *
- * Inspired by the boardfile by Rod Whitby, Tower Technologies, Alessandro Zummo
- * and Michael Westerhof.
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "D-Link DSM-G600 rev A";
-	compatible = "dlink,dsm-g600-a", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 64 MB SDRAM */
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
-		stdout-path = "uart0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-power {
-			label = "dsmg600:green:power";
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		led-wlan {
-			label = "dsmg600:green:wlan";
-			/* CHECKME: flagged as active low in the old board file */
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			/* We don't have WLAN trigger in the kernel (yet) */
-			linux,default-trigger = "netdev";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-reset {
-			wakeup-source;
-			linux,code = <KEY_ESC>;
-			label = "reset";
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_keys_polled {
-		compatible = "gpio-keys-polled";
-
-		/*
-		 * According to the board file this key cannot handle interrupts and
-		 * need to be polled. Investigate if this is really the case or if
-		 * this can be moved adjacent to the ordinary gpio-keys above.
-		 */
-		button-power {
-			wakeup-source;
-			linux,code = <KEY_POWER>;
-			label = "power";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc@51 {
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-		timeout-ms = <5000>;
-	};
-
-	soc {
-		bus@c4000000 {
-			/* The first 16MB region at CS0 on the expansion bus */
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/*
-				 * 16 MB of Flash in 128 0x20000 sized blocks
-				 * mapped in at CS0.
-				 */
-				reg = <0 0x00000000 0x1000000>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/*
-					 * A boot log says the directory is at 0xfe0000
-					 * 0x7f * 0x20000 = 0xfe0000
-					 */
-					fis-index-block = <0x7f>;
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c)
-			 * We have slots (IDSEL) 1, 2, 3, 4 and pins 1, 2 and 3.
-			 * Only slot 3 have three IRQs.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 7  IRQ_TYPE_LEVEL_LOW>, /* INT E on slot 1 is irq 7 */
-			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
-			/* IDSEL 3 */
-			<0x1800 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 10 */
-			<0x1800 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 9 */
-			<0x1800 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 8 */
-			/* IDSEL 4 */
-			<0x2000 0 0 3 &gpio0 6  IRQ_TYPE_LEVEL_LOW>; /* INT F on slot 4 is irq 6 */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
deleted file mode 100644
index 5a5e16cc7335e..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
+++ /dev/null
@@ -1,219 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for the Freecom FSG-3 router.
- * This machine is based on IXP425.
- * This device tree is inspired by the board file by Rod Whitby.
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Freecom FSG-3";
-	compatible = "freecom,fsg-3", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 64 MB memory */
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	chosen {
-		/* Boot from the first partition on the hard drive */
-		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
-		stdout-path = "uart0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-sync {
-			wakeup-source;
-			/* Closest approximation of what the key should do */
-			linux,code = <KEY_CONNECT>;
-			label = "sync";
-			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-		};
-		button-reset {
-			wakeup-source;
-			linux,code = <KEY_ESC>;
-			label = "reset";
-			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-		};
-		button-usb {
-			wakeup-source;
-			/* Unplug USB, closest approximation of what the key should do */
-			linux,code = <KEY_EJECTCD>;
-			label = "usb";
-			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hwmon@28 {
-			/*
-			 * Temperature sensor and fan control chip.
-			 *
-			 * TODO: create a proper device tree binding for
-			 * the sensor and temperature zone and create a
-			 * zone with fan control.
-			 */
-			compatible = "winbond,w83781d";
-			reg = <0x28>;
-		};
-		rtc@6f {
-			compatible = "isil,isl1208";
-			reg = <0x6f>;
-		};
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/* Enable writes on the expansion bus */
-				intel,ixp4xx-eb-write-enable = <1>;
-				/* 4 MB of Flash mapped in at CS0 */
-				reg = <0 0x00000000 0x400000>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* Eraseblock at 0x3e0000 */
-					fis-index-block = <0x1f>;
-				};
-			};
-
-			/* Small syscon with some LEDs at CS2 */
-			syscon@2,0 {
-				compatible = "freecom,fsg-cs2-system-controller", "syscon";
-				reg = <2 0x0 0x200>;
-				reg-io-width = <2>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <2 0x0 0x0 0x200>;
-
-				led@0,0 {
-					compatible = "register-bit-led";
-					reg = <0x00 0x02>;
-					mask = <0x01>;
-					label = "fsg:blue:wlan";
-					linux,default-trigger = "wlan";
-					default-state = "on";
-				};
-				led@0,1 {
-					compatible = "register-bit-led";
-					reg = <0x00 0x02>;
-					mask = <0x02>;
-					label = "fsg:blue:wan";
-					linux,default-trigger = "";
-					default-state = "on";
-				};
-				led@0,2 {
-					compatible = "register-bit-led";
-					reg = <0x00 0x02>;
-					mask = <0x04>;
-					label = "fsg:blue:sata";
-					linux,default-trigger = "";
-					default-state = "on";
-				};
-				led@0,3 {
-					compatible = "register-bit-led";
-					reg = <0x00 0x02>;
-					mask = <0x04>;
-					label = "fsg:blue:usb";
-					linux,default-trigger = "";
-					default-state = "on";
-				};
-				led@0,4 {
-					compatible = "register-bit-led";
-					reg = <0x00 0x02>;
-					mask = <0x08>;
-					label = "fsg:blue:sync";
-					linux,default-trigger = "";
-					default-state = "on";
-				};
-				led@0,5 {
-					compatible = "register-bit-led";
-					reg = <0x00 0x02>;
-					mask = <0x10>;
-					label = "fsg:blue:ring";
-					linux,default-trigger = "";
-					default-state = "on";
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * Written based on the FSG-3 PCI boardfile.
-			 * We have slots 12, 13 & 14 (IDSEL) with one IRQ each.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 12 */
-			<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
-			<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
-			<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
-			<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
-			/* IDSEL 13 */
-			<0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
-			<0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
-			<0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
-			<0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
-			/* IDSEL 14 */
-			<0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
-			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
-			<0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
-			<0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
-		};
-
-		/* EthB */
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy4: ethernet-phy@4 {
-					reg = <4>;
-				};
-
-				phy5: ethernet-phy@5 {
-					reg = <5>;
-				};
-			};
-		};
-
-		/* EthC */
-		ethernet@c800a000 {
-			status = "okay";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy4>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
deleted file mode 100644
index 4d70f6afd13ab..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for Gateway 7001 AP based on IXP422
- * Derived from boardfiles written by Imre Kaloz
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Gateway 7001 AP";
-	compatible = "gateway,7001", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 32 MB SDRAM */
-		device_type = "memory";
-		reg = <0x00000000 0x2000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = "uart1:115200n8";
-	};
-
-	aliases {
-		/* second UART is the primary console */
-		serial0 = &uart1;
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/*
-				 * 8 MB of flash
-				 */
-				reg = <0 0x00000000 0x800000>;
-
-				/* Configure expansion bus to allow writes */
-				intel,ixp4xx-eb-write-enable = <1>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* Eraseblock at 0x7e0000 */
-					fis-index-block = <0x3f>;
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c)
-			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
-			 * each handling all IRQs.
-			 */
-			interrupt-map =
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
-			<0x0800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 11 */
-			<0x0800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 11 */
-			<0x0800 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 11 */
-			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
-			<0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */
-			<0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */
-			<0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */
-		};
-
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-		};
-
-		ethernet@c800a000 {
-			status = "okay";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy2>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy2: ethernet-phy@2 {
-					reg = <2>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
deleted file mode 100644
index 97e3f25bb210f..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for the Gateworks Avila GW2348 board.
- * This machine is based on IXP425.
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Gateworks Avila GW2348";
-	compatible = "gateworks,gw2348", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = "uart0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-user {
-			label = "gw2348:green:user";
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hwmon@28 {
-			compatible = "adi,ad7418";
-			reg = <0x28>;
-		};
-		rtc: ds1672@68 {
-			compatible = "dallas,ds1672";
-			reg = <0x68>;
-		};
-		eeprom@51 {
-			compatible = "atmel,24c08";
-			reg = <0x51>;
-			pagesize = <16>;
-			size = <1024>;
-			read-only;
-		};
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/* Enable writes on the expansion bus */
-				intel,ixp4xx-eb-write-enable = <1>;
-				/* 16 MB of Flash mapped in at CS0 */
-				reg = <0 0x00000000 0x1000000>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* Eraseblock at 0x0fe0000 */
-					fis-index-block = <0x7f>;
-				};
-			};
-			ide@1,0 {
-				compatible = "intel,ixp4xx-compact-flash";
-				/*
-				 * Set up expansion bus config to a really slow timing.
-				 * The CF driver will dynamically reconfigure these timings
-				 * depending on selected PIO mode (0-4).
-				 */
-				intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
-				intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
-				intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
-				intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
-				intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
-				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
-				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
-				intel,ixp4xx-eb-mux-address-and-data = <0>;
-				intel,ixp4xx-eb-ahb-split-transfers = <0>;
-				intel,ixp4xx-eb-write-enable = <1>;
-				intel,ixp4xx-eb-byte-access = <1>;
-				/* First register set is CMD second is CTL (notice it uses CS2) */
-				reg = <1 0x00000000 0x1000000>, <2 0x00000000 0x1000000>;
-				interrupt-parent = <&gpio0>;
-				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-			};
-			/*
-			 * FIXME: Latch LEDs or extra UARTs at CS4
-			 */
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * Taken from Avila PCI boardfile.
-			 *
-			 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
-			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
-			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
-			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
-			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
-			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
-			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
-			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
-			/* IDSEL 3 */
-			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
-			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
-			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
-			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
-			/* IDSEL 4 */
-			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
-			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
-			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
-			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
-		};
-
-		/* EthB */
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-		};
-
-		/* EthC */
-		ethernet@c800a000 {
-			status = "okay";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts
deleted file mode 100644
index 9ec0169bacf8c..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for the Goramo MultiLink Router
- * There are two variants:
- * - MultiLink Basic (a box)
- * - MultiLink Max (19" rack mount)
- * This device tree supports MultiLink Basic.
- * This machine is based on IXP425.
- * This is one of the few devices supporting the IXP4xx High-Speed Serial
- * (HSS) link for a V.35 WAN interface.
- * The hardware originates in Poland.
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Goramo MultiLink Router";
-	compatible = "goramo,multilink-router", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/*
-		 * 64 MB of RAM according to the manual. The MultiLink
-		 * Max has 128 MB.
-		 */
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = "uart0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	/*
-	 * 74HC4094 which is used as a rudimentary GPIO expander
-	 * FIXME:
-	 * - Create device tree bindings for this as GPIO expander
-	 * - Write a pure DT GPIO driver using these bindings
-	 * - Support cascading in the style of gpio-74x164.c (cannot be reused, very different)
-	 */
-	gpio_74: gpio-74hc4094 {
-		compatible = "nxp,74hc4094";
-		cp-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-		d-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-		str-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-		/* oe-gpios is optional */
-		gpio-controller;
-		#gpio-cells = <2>;
-		/* We are not cascaded */
-		registers-number = <1>;
-		gpio-line-names = "CONTROL_HSS0_CLK_INT", "CONTROL_HSS1_CLK_INT", "CONTROL_HSS0_DTR_N",
-				"CONTROL_HSS1_DTR_N", "CONTROL_EXT", "CONTROL_AUTO_RESET",
-				"CONTROL_PCI_RESET_N", "CONTROL_EEPROM_WC_N";
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/* Enable writes on the expansion bus */
-				intel,ixp4xx-eb-write-enable = <1>;
-				/* 16 MB of Flash mapped in at CS0 */
-				reg = <0 0x00000000 0x1000000>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* Eraseblock at 0x0fe0000 */
-					fis-index-block = <0x7f>;
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * The device has 4 slots (IDSEL) with one dedicated IRQ per slot.
-			 * The slots have Ethernet, Ethernet, NEC and MPCI.
-			 * The IDSELs are 11, 12, 13, 14.
-			 */
-			interrupt-map =
-			/* IDSEL 11 - Ethernet A */
-			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
-			<0x5800 0 0 2 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 11 is irq 4 */
-			<0x5800 0 0 3 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 11 is irq 4 */
-			<0x5800 0 0 4 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 11 is irq 4 */
-			/* IDSEL 12 - Ethernet B */
-			<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
-			<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
-			<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
-			<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
-			/* IDSEL 13 - MPCI */
-			<0x6800 0 0 1 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 12 */
-			<0x6800 0 0 2 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 12 */
-			<0x6800 0 0 3 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 12 */
-			<0x6800 0 0 4 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 12 */
-			/* IDSEL 14 - NEC */
-			<0x7000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 3 */
-			<0x7000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 3 */
-			<0x7000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 3 */
-			<0x7000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 3 */
-		};
-
-		/* HSS links */
-		npe@c8006000 {
-			hss@0 {
-				status = "okay";
-				intel,queue-chl-rxtrig = <&qmgr 12>;
-				intel,queue-chl-txready = <&qmgr 34>;
-				intel,queue-pkt-rx = <&qmgr 13>;
-				intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
-				intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
-				intel,queue-pkt-txdone = <&qmgr 22>;
-				/* The Goramo GPIO-based clock etc control */
-				cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-				rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-				dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-				dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
-				clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
-			};
-			hss@1 {
-				status = "okay";
-				intel,queue-chl-rxtrig = <&qmgr 10>;
-				intel,queue-chl-txready = <&qmgr 35>;
-				intel,queue-pkt-rx = <&qmgr 0>;
-				intel,queue-pkt-tx = <&qmgr 5>, <&qmgr 6>, <&qmgr 7>, <&qmgr 8>;
-				intel,queue-pkt-rxfree = <&qmgr 1>, <&qmgr 2>, <&qmgr 3>, <&qmgr 4>;
-				intel,queue-pkt-txdone = <&qmgr 9>;
-				/* The Goramo GPIO-based clock etc control */
-				cts-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-				rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-				dcd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-				dtr-gpios = <&gpio_74 3 GPIO_ACTIVE_LOW>;
-				clk-internal-gpios = <&gpio_74 1 GPIO_ACTIVE_HIGH>;
-			};
-		};
-
-		/* EthB */
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 32>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-		};
-
-		/* EthC */
-		ethernet@c800a000 {
-			status = "okay";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 33>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
deleted file mode 100644
index 8da6823e1dbe6..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for Iomega NAS 100D
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Iomega NAS 100D";
-	compatible = "iom,nas-100d", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 64 MB SDRAM */
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
-		stdout-path = "uart0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-wlan {
-			label = "nas100d:red:wlan";
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			/* We don't have WLAN trigger in the kernel (yet) */
-			linux,default-trigger = "netdev";
-		};
-		led-disk {
-			label = "nas100d:red:disk";
-			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "disk-activity";
-		};
-		led-power {
-			label = "nas100d:red:power";
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-power {
-			wakeup-source;
-			linux,code = <KEY_POWER>;
-			label = "power";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		};
-		button-reset {
-			wakeup-source;
-			linux,code = <KEY_ESC>;
-			label = "reset";
-			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc@51 {
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		timeout-ms = <5000>;
-	};
-
-	soc {
-		bus@c4000000 {
-			/* The first 16MB region at CS0 on the expansion bus */
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/*
-				 * 8 MB of Flash in 0x20000 byte blocks
-				 * mapped in at CS0.
-				 */
-				reg = <0 0x00000000 0x800000>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* Eraseblock at 0x7e0000 */
-					fis-index-block = <0x3f>;
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * Taken from NAS 100D PCI boardfile (nas100d-pci.c)
-			 * We have slots (IDSEL) 1, 2 and 3 and pins 1, 2 and 3.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
-			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
-			/* IDSEL 3 */
-			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
-			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
-			<0x1800 0 0 3 &gpio0 7  IRQ_TYPE_LEVEL_LOW>; /* INT C on slot 3 is irq 7 */
-		};
-
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
deleted file mode 100644
index 194945748dc3c..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for the Intel IXDP425 also known as IXCDP1100 Control Plane
- * processor reference design.
- *
- * This platform has the codename "Richfield".
- *
- * This machine is based on a 533 MHz IXP425.
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include "intel-ixp4xx-reference-design.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Intel IXDP425/IXCDP1100 Richfield Reference Design";
-	compatible = "intel,ixdp425", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/* Enable writes on the expansion bus */
-				intel,ixp4xx-eb-write-enable = <1>;
-				/* 16 MB of Flash mapped in at CS0 */
-				reg = <0 0x00000000 0x1000000>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* Eraseblock at 0x0fe0000 */
-					fis-index-block = <0x7f>;
-				};
-			};
-		};
-
-		/* EthB */
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-		};
-
-		/* EthC */
-		ethernet@c800a000 {
-			status = "okay";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
deleted file mode 100644
index 7011fea6205bd..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for the Intel IXDPG425 reference design.
- * Derived from boardfiles written by MontaVista software.
- * Ethernet set-up from OpenWrt.
- *
- * The device has 4 x FXS RJ11 ports for analog phones for
- * internet telephony. (Not supported yet.)
- *
- * The device has 9 status LEDs we do not support yet.
- *
- * This device is very similar to ADI engingeering Coyote.
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Intel IXDPG425 reference design";
-	compatible = "intel,ixdpg425", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 32 MB SDRAM */
-		device_type = "memory";
-		reg = <0x00000000 0x02000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
-		stdout-path = "uart0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/*
-				 * CHECKME: the product brief says 16MB in a flash
-				 * socket.
-				 */
-				reg = <0 0x00000000 0x1000000>;
-
-				/* Configure expansion bus to allow writes */
-				intel,ixp4xx-eb-write-enable = <1>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* CHECKME: guess this is Redboot FIS */
-					fis-index-block = <0x7f>;
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * Taken from IXDPG425 PCI boardfile.
-			 * We have slots (IDSEL) 12, 13 and 14 with one assigned IRQ
-			 * for 12 & 13 and one for 14.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 12 */
-			<0x6000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 7 */
-			<0x6000 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 7 */
-			<0x6000 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 7 */
-			<0x6000 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 7 */
-			/* IDSEL 13 */
-			<0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
-			<0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
-			<0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
-			<0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
-			/* IDSEL 14 */
-			<0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
-			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
-			<0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
-			<0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
-		};
-
-		/*
-		 * CHECKME: this ethernet setup seems dubious. Photos of the board shows some kind
-		 * of Realtek DSA switch on the board.
-		 */
-
-		/* EthB */
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy4: ethernet-phy@4 {
-					reg = <4>;
-				};
-
-				phy5: ethernet-phy@5 {
-					reg = <5>;
-				};
-			};
-		};
-
-		/* EthC */
-		ethernet@c800a000 {
-			status = "okay";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy4>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
deleted file mode 100644
index da1e93212b86e..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for Linksys NSLU2
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives)";
-	compatible = "linksys,nslu2", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 32 MB SDRAM */
-		device_type = "memory";
-		reg = <0x00000000 0x2000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
-		stdout-path = "uart0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-status {
-			label = "nslu2:red:status";
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		led-ready {
-			label = "nslu2:green:ready";
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-		led-disk-1 {
-			label = "nslu2:green:disk-1";
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-		led-disk-2 {
-			label = "nslu2:green:disk-2";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-power {
-			wakeup-source;
-			linux,code = <KEY_POWER>;
-			label = "power";
-			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-		};
-		button-reset {
-			wakeup-source;
-			linux,code = <KEY_ESC>;
-			label = "reset";
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc@6f {
-			compatible = "xicor,x1205";
-			reg = <0x6f>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		timeout-ms = <5000>;
-	};
-
-	gpio-beeper {
-		compatible = "gpio-beeper";
-		gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-	};
-
-	soc {
-		bus@c4000000 {
-			/* The first 16MB region at CS0 on the expansion bus */
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/*
-				 * 8 MB of Flash in 0x20000 byte blocks
-				 * mapped in at CS0.
-				 */
-				reg = <0 0x00000000 0x800000>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* Eraseblock at 0x7e0000 */
-					fis-index-block = <0x3f>;
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
-			 * We have slots (IDSEL) 1, 2 and 3.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
-			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
-			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
-			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
-			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
-			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
-			<0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
-			<0x1000 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 8 */
-			/* IDSEL 3 */
-			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
-			<0x1800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
-			<0x1800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
-			<0x1800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 8 */
-		};
-
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
deleted file mode 100644
index 4aba9e0214a0b..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for the Linksys WRV54G router
- * Also known as Gemtek GTWX5715
- * Based on a board file by George T. Joseph and other patches.
- * This machine is based on IXP425.
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Linksys WRV54G / Gemtek GTWX5715";
-	compatible = "linksys,wrv54g", "gemtek,gtwx5715", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 32 MB memory */
-		device_type = "memory";
-		reg = <0x00000000 0x2000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = "uart1:115200n8";
-	};
-
-	aliases {
-		/* UART2 is the primary console */
-		serial0 = &uart1;
-		serial1 = &uart0;
-	};
-
-	/* There is an unpopulated LED slot (3) connected to GPIO 8 */
-	leds {
-		compatible = "gpio-leds";
-		led-power {
-			label = "wrv54g:yellow:power";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		led-wireless {
-			label = "wrv54g:yellow:wireless";
-			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		led-internet {
-			label = "wrv54g:yellow:internet";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		led-dmz {
-			label = "wrv54g:green:dmz";
-			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-	};
-
-	/* This set-up comes from an OpenWrt patch */
-	spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sck-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-
-		switch@0 {
-			compatible = "micrel,ks8995";
-			reg = <0>;
-			spi-max-frequency = <50000000>;
-		};
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/* Enable writes on the expansion bus */
-				intel,ixp4xx-eb-write-enable = <1>;
-				/* 8 MB of Flash mapped in at CS0 */
-				reg = <0 0x00000000 0x00800000>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					/*
-					 * Partition info from a boot log
-					 * CHECKME: not using redboot? FIS index 0x3f @7e00000?
-					 */
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "boot";
-						reg = <0x0 0x140000>;
-						read-only;
-					};
-					partition@140000 {
-						label = "linux";
-						reg = <0x140000 0x100000>;
-						read-only;
-					};
-					partition@240000 {
-						label = "root";
-						reg = <0x240000 0x480000>;
-						read-write;
-					};
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
-			 * Derived from the GTWX5715 PCI boardfile.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 0 */
-			<0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */
-			<0x0000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 0 is irq 11 */
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
-			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 1 is irq 10 */
-		};
-
-		/*
-		 * EthB - connected to the KS8995 switch ports 1-4
-		 * FIXME: the boardfile defines .phy_mask = 0x1e for this port to enable output to
-		 * all four switch ports, also using an out of tree multiphy patch.
-		 * Do we need a new binding and property for this?
-		 */
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy4>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/* Should be ports 1-4 on the KS8995 switch */
-				phy4: ethernet-phy@4 {
-					reg = <4>;
-				};
-
-				/* Should be port 5 on the KS8995 switch */
-				phy5: ethernet-phy@5 {
-					reg = <5>;
-				};
-			};
-		};
-
-		/* EthC - connected to KS8995 switch port 5 */
-		ethernet@c800a000 {
-			status = "okay";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
deleted file mode 100644
index 19d56e9aec9d8..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for Netgear WG302v2 based on IXP422BB
- * Derived from boardfiles written by Imre Kaloz
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear WG302 v1";
-	compatible = "netgear,wg302v1", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 32 MB SDRAM according to boot arguments */
-		device_type = "memory";
-		reg = <0x00000000 0x02000000>;
-	};
-
-	chosen {
-		/* The RedBoot comes up in 9600 baud so let's keep this */
-		bootargs = "console=ttyS0,9600n8";
-		stdout-path = "uart1:9600n8";
-	};
-
-	aliases {
-		/* These are switched around */
-		serial0 = &uart1;
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/*
-				 * 8 MB of Flash in 64 0x20000 sized blocks
-				 * mapped in at CS0.
-				 */
-				reg = <0 0x00000000 0x800000>;
-
-				/* Configure expansion bus to allow writes */
-				intel,ixp4xx-eb-write-enable = <1>;
-
-				partitions {
-					compatible = "redboot-fis";
-					fis-index-block = <0x3f>;
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c)
-			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
-			 * each handling all IRQs.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
-			<0x0800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 8 */
-			<0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */
-			<0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
-			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 9 */
-			<0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
-			<0x1000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 9 */
-			<0x1000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 9 */
-		};
-
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy30>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy30: ethernet-phy@30 {
-					reg = <30>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
deleted file mode 100644
index c550c421b659c..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-
-/ {
-	model = "Welltech EPBX100";
-	compatible = "welltech,epbx100", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 64 MB SDRAM */
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 root=/dev/ram0 initrd=0x00800000,9M";
-		stdout-path = "uart0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/*
-				 * 16 MB of Flash
-				 */
-				reg = <0 0x00000000 0x1000000>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "RedBoot";
-						reg = <0x00000000 0x00080000>;
-						read-only;
-					};
-					partition@80000 {
-						label = "zImage";
-						reg = <0x00080000 0x00100000>;
-						read-only;
-					};
-					partition@180000 {
-						label = "ramdisk";
-						reg = <0x00180000 0x00300000>;
-						read-only;
-					};
-					partition@480000 {
-						label = "User";
-						reg = <0x00480000 0x00b60000>;
-						read-only;
-					};
-					partition@fe0000 {
-						label = "FIS directory";
-						reg = <0x00fe0000 0x001f000>;
-						read-only;
-					};
-					partition@fff000 {
-						label = "RedBoot config";
-						reg = <0x00fff000 0x0001000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		/* LAN port */
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy5: ethernet-phy@5 {
-					reg = <5>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi
deleted file mode 100644
index 84cee8ec3ab81..0000000000000
--- a/arch/arm/boot/dts/intel-ixp42x.dtsi
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for Intel XScale Network Processors
- * in the IXP 42x series. This series has 32 interrupts.
- */
-#include "intel-ixp4xx.dtsi"
-
-/ {
-	soc {
-		bus@c4000000 {
-			compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
-			reg = <0xc4000000 0x30>;
-		};
-
-		pci@c0000000 {
-			compatible = "intel,ixp42x-pci";
-		};
-
-		interrupt-controller@c8003000 {
-			compatible = "intel,ixp42x-interrupt";
-		};
-
-		/*
-		 * This is the USB Device Mode (UDC) controller, which is used
-		 * to present the IXP4xx as a device on a USB bus.
-		 */
-		usb@c800b000 {
-			compatible = "intel,ixp4xx-udc";
-			reg = <0xc800b000 0x1000>;
-			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
deleted file mode 100644
index 1db849515f9e9..0000000000000
--- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
+++ /dev/null
@@ -1,199 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for Gateworks IXP43x-based Cambria GW2358
- */
-
-/dts-v1/;
-
-#include "intel-ixp43x.dtsi"
-
-/ {
-	model = "Gateworks Cambria GW2358";
-	compatible = "gateworks,gw2358", "intel,ixp43x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 128 MB SDRAM */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
-		stdout-path = "uart0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-user {
-			label = "gw2358:green:LED";
-			gpios = <&pld1 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-
-	i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hwmon@28 {
-			compatible = "adi,ad7418";
-			reg = <0x28>;
-		};
-		rtc: ds1672@68 {
-			compatible = "dallas,ds1672";
-			reg = <0x68>;
-		};
-		eeprom@51 {
-			compatible = "atmel,24c08";
-			reg = <0x51>;
-			pagesize = <16>;
-			size = <1024>;
-			read-only;
-		};
-		pld0: pld@56 {
-			compatible = "gateworks,pld-gpio";
-			reg = <0x56>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-		/* This PLD just handles the LED and user button */
-		pld1: pld@57 {
-			compatible = "gateworks,pld-gpio";
-			reg = <0x57>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/* Enable writes on the expansion bus */
-				intel,ixp4xx-eb-write-enable = <1>;
-				/*
-				 * 32 MB of Flash in 0x20000 byte blocks
-				 * mapped in at CS0 and CS1
-				 */
-				reg = <0 0x00000000 0x2000000>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* Eraseblock at 0x1fe0000 */
-					fis-index-block = <0xff>;
-				};
-			};
-			ide@3,0 {
-				compatible = "intel,ixp4xx-compact-flash";
-				/*
-				 * Set up expansion bus config to a really slow timing.
-				 * The CF driver will dynamically reconfigure these timings
-				 * depending on selected PIO mode (0-4).
-				 */
-				intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
-				intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
-				intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
-				intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
-				intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
-				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
-				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
-				intel,ixp4xx-eb-mux-address-and-data = <0>;
-				intel,ixp4xx-eb-ahb-split-transfers = <0>;
-				intel,ixp4xx-eb-write-enable = <1>;
-				intel,ixp4xx-eb-byte-access = <1>;
-				/* First register set is CMD second is CTL */
-				reg = <3 0xe00000 0x40000>, <3 0xe40000 0x40000>;
-				interrupt-parent = <&gpio0>;
-				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * In the boardfile for the Cambria from OpenWRT the interrupts
-			 * are assigned one per IDSEL, so all 4 interrupts from IDSEL
-			 * 1 are connected to IRQ 11, all 4 interrupts from IDSEL 2
-			 * connected to IRQ 10 etc. I find this highly unlikely so I
-			 * have instead assumed that they are rotated (swizzled) like
-			 * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
-			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
-			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
-			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
-			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
-			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
-			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
-			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
-			/* IDSEL 3 */
-			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
-			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
-			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
-			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
-			/* IDSEL 4 */
-			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
-			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
-			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
-			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 9 */
-			/* IDSEL 6 */
-			<0x3000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 10 */
-			<0x3000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 9 */
-			<0x3000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 8 */
-			<0x3000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 11 */
-			/* IDSEL 15 */
-			<0x7800 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
-			<0x7800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
-			<0x7800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
-			<0x7800 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 9 */
-		};
-
-		ethernet@c800a000 {
-			status = "okay";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <2>;
-				};
-			};
-		};
-
-		ethernet@c800c000 {
-			status = "okay";
-			queue-rx = <&qmgr 2>;
-			queue-txready = <&qmgr 19>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy2>;
-			intel,npe-handle = <&npe 0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
deleted file mode 100644
index 4703a8b24765f..0000000000000
--- a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for the Intel KIXRP435 Control Plane
- * processor reference design.
- */
-
-/dts-v1/;
-
-#include "intel-ixp43x.dtsi"
-#include "intel-ixp4xx-reference-design.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Intel KIXRP435 Reference Design";
-	compatible = "intel,kixrp435", "intel,ixp43x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/* Enable writes on the expansion bus */
-				intel,ixp4xx-eb-write-enable = <1>;
-				/* 16 MB of Flash mapped in at CS0 */
-				reg = <0 0x00000000 0x1000000>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* Eraseblock at 0x0fe0000 */
-					fis-index-block = <0x7f>;
-				};
-			};
-		};
-
-		/* CHECKME: ethernet set-up taken from Gateworks Cambria */
-		ethernet@c800a000 {
-			status = "okay";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <2>;
-				};
-			};
-		};
-
-		ethernet@c800c000 {
-			status = "okay";
-			queue-rx = <&qmgr 2>;
-			queue-txready = <&qmgr 19>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy2>;
-			intel,npe-handle = <&npe 0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel-ixp43x.dtsi
deleted file mode 100644
index 60bf9903e0f8c..0000000000000
--- a/arch/arm/boot/dts/intel-ixp43x.dtsi
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for Intel XScale Network Processors
- * in the IXP 43x series. This series has 64 interrupts and adds a few more
- * peripherals over the 42x series.
- */
-#include "intel-ixp4xx.dtsi"
-
-/ {
-	soc {
-		bus@c4000000 {
-			compatible = "intel,ixp43x-expansion-bus-controller", "syscon";
-			/* Uses at least up to 0x230 */
-			reg = <0xc4000000 0x1000>;
-		};
-
-		pci@c0000000 {
-			compatible = "intel,ixp43x-pci";
-		};
-
-		interrupt-controller@c8003000 {
-			compatible = "intel,ixp43x-interrupt";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
deleted file mode 100644
index 1dd4a65cb7a68..0000000000000
--- a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for Intel XScale Network Processors
- * in the IXP45x and IXP46x series. This series has 64 interrupts and adds a
- * few more peripherals over the 42x and 43x series so this extends the
- * basic IXP4xx DTSI.
- */
-#include "intel-ixp4xx.dtsi"
-
-/ {
-	soc {
-		bus@c4000000 {
-			compatible = "intel,ixp46x-expansion-bus-controller", "syscon";
-			/* Uses at least up to 0x124 */
-			reg = <0xc4000000 0x1000>;
-		};
-
-		rng@70002100 {
-			compatible = "intel,ixp46x-rng";
-			reg = <0x70002100 4>;
-		};
-
-		interrupt-controller@c8003000 {
-			compatible = "intel,ixp43x-interrupt";
-		};
-
-		/*
-		 * This is the USB Device Mode (UDC) controller, which is used
-		 * to present the IXP4xx as a device on a USB bus.
-		 */
-		usb@c800b000 {
-			compatible = "intel,ixp4xx-udc";
-			reg = <0xc800b000 0x1000>;
-			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		i2c@c8011000 {
-			compatible = "intel,ixp4xx-i2c";
-			reg = <0xc8011000 0x18>;
-			interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		/* This is known as EthB1 */
-		ethernet@c800d000 {
-			compatible = "intel,ixp4xx-ethernet";
-			reg = <0xc800d000 0x1000>;
-			status = "disabled";
-			intel,npe = <1>;
-			/* Dummy values that depend on firmware */
-			queue-rx = <&qmgr 0>;
-			queue-txready = <&qmgr 0>;
-		};
-
-		/* This is known as EthB2 */
-		ethernet@c800e000 {
-			compatible = "intel,ixp4xx-ethernet";
-			reg = <0xc800e000 0x1000>;
-			status = "disabled";
-			intel,npe = <2>;
-			/* Dummy values that depend on firmware */
-			queue-rx = <&qmgr 0>;
-			queue-txready = <&qmgr 0>;
-		};
-
-		/* This is known as EthB3 */
-		ethernet@c800f000 {
-			compatible = "intel,ixp4xx-ethernet";
-			reg = <0xc800f000 0x1000>;
-			status = "disabled";
-			intel,npe = <3>;
-			/* Dummy values that depend on firmware */
-			queue-rx = <&qmgr 0>;
-			queue-txready = <&qmgr 0>;
-		};
-
-		ptp-timer@c8010000 {
-			compatible = "intel,ixp46x-ptp-timer";
-			reg = <0xc8010000 0x1000>;
-			interrupt-parent = <&gpio0>;
-			interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>;
-			interrupt-names = "master", "slave";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp46x-ixdp465.dts b/arch/arm/boot/dts/intel-ixp46x-ixdp465.dts
deleted file mode 100644
index a062cd1a6588d..0000000000000
--- a/arch/arm/boot/dts/intel-ixp46x-ixdp465.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for the Intel IXDP465 Control Plane processor reference
- * design, codename "BMP".
- */
-
-/dts-v1/;
-
-#include "intel-ixp45x-ixp46x.dtsi"
-#include "intel-ixp4xx-reference-design.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Intel IXDP465 BMP Reference Design";
-	compatible = "intel,ixdp465", "intel,ixp46x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/* Enable writes on the expansion bus */
-				intel,ixp4xx-eb-write-enable = <1>;
-				/* 32 MB of Flash mapped in at CS0 and CS1 */
-				reg = <0 0x00000000 0x2000000>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* Eraseblock at 0x1fe0000 */
-					fis-index-block = <0xff>;
-				};
-			};
-		};
-		/* TODO: configure ethernet etc */
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
deleted file mode 100644
index 31c0a69771c47..0000000000000
--- a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree include file for Intel reference designs for the
- * XScale Network Processors in the IXP 4xx series. Common device
- * set-up for IXDP425, IXCDP1100, KIXRP435 and IXDP465.
- */
-
-/ {
-	memory@0 {
-		/*
-		 * The board supports up to 256 MB of memory. Here we put in
-		 * 64 MB and this may be modified by the boot loader.
-		 */
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = "uart0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		eeprom@50 {
-			/*
-			 * Philips PCF8582C-2T/03 512byte I2C EEPROM
-			 * should behave like an Atmel 24c04.
-			 */
-			compatible = "atmel,24c04";
-			reg = <0x50>;
-			pagesize = <16>;
-			size = <512>;
-			read-only;
-		};
-	};
-
-	soc {
-		bus@c4000000 {
-			/* Flash memory defined per-variant */
-			nand-controller@3,0 {
-				/* Some designs have a NAND on CS3 enable it here if present */
-				status = "disabled";
-
-				/*
-				 * gen_nand needs to be extended and documented to get
-				 * command byte = 1 and address byte = 2 from the device
-				 * tree.
-				 */
-				compatible = "gen_nand";
-
-				/* Expansion bus set-up */
-				intel,ixp4xx-eb-t1 = <0>;
-				intel,ixp4xx-eb-t2 = <0>;
-				intel,ixp4xx-eb-t3 = <1>; // 1 cycle extra strobe phase
-				intel,ixp4xx-eb-t4 = <0>;
-				intel,ixp4xx-eb-t5 = <0>;
-				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
-				intel,ixp4xx-eb-byte-access-on-halfword = <0>;
-				intel,ixp4xx-eb-mux-address-and-data = <0>;
-				intel,ixp4xx-eb-ahb-split-transfers = <0>;
-				intel,ixp4xx-eb-write-enable = <1>;
-				intel,ixp4xx-eb-byte-access = <1>;
-
-				/* 512 bytes memory window */
-				reg = <3 0x00000000 0x200>;
-				nand-on-flash-bbt;
-				nand-ecc-mode = "soft_bch";
-				nand-ecc-step-size = <512>;
-				nand-ecc-strength = <4>;
-				nce-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* NCE */
-
-				label = "ixp400 NAND";
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					fs@0 {
-						label = "ixp400 NAND FS 0";
-						reg = <0x0 0x800000>;
-					};
-					fs@800000 {
-						label = "ixp400 NAND FS 1";
-						reg = <0x800000 0x0>;
-					};
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * Taken from IXDP425 PCI boardfile.
-			 * PCI slots on the BIXMB425BD base card.
-			 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
-			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
-			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
-			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
-			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
-			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
-			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
-			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
-			/* IDSEL 3 */
-			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
-			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
-			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
-			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
-			/* IDSEL 4 */
-			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
-			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
-			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
-			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi
deleted file mode 100644
index 51a716c596698..0000000000000
--- a/arch/arm/boot/dts/intel-ixp4xx.dtsi
+++ /dev/null
@@ -1,202 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for Intel XScale Network Processors
- * in the IXP 4xx series.
- */
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-		interrupt-parent = <&intcon>;
-
-		/*
-		 * The IXP4xx expansion bus is a set of up to 7 each up to 16MB
-		 * windows in the 256MB space from 0x50000000 to 0x5fffffff.
-		 */
-		bus@c4000000 {
-			/* compatible and reg filled in by per-soc device tree */
-			native-endian;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0x0 0x50000000 0x01000000>,
-				 <1 0x0 0x51000000 0x01000000>,
-				 <2 0x0 0x52000000 0x01000000>,
-				 <3 0x0 0x53000000 0x01000000>,
-				 <4 0x0 0x54000000 0x01000000>,
-				 <5 0x0 0x55000000 0x01000000>,
-				 <6 0x0 0x56000000 0x01000000>,
-				 <7 0x0 0x57000000 0x01000000>;
-			dma-ranges = <0 0x0 0x50000000 0x01000000>,
-				 <1 0x0 0x51000000 0x01000000>,
-				 <2 0x0 0x52000000 0x01000000>,
-				 <3 0x0 0x53000000 0x01000000>,
-				 <4 0x0 0x54000000 0x01000000>,
-				 <5 0x0 0x55000000 0x01000000>,
-				 <6 0x0 0x56000000 0x01000000>,
-				 <7 0x0 0x57000000 0x01000000>;
-		};
-
-		qmgr: queue-manager@60000000 {
-			compatible = "intel,ixp4xx-ahb-queue-manager";
-			reg = <0x60000000 0x4000>;
-			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pci@c0000000 {
-			/* compatible filled in by per-soc device tree */
-			reg = <0xc0000000 0x1000>;
-			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
-				     <9 IRQ_TYPE_LEVEL_HIGH>,
-				     <10 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			bus-range = <0x00 0xff>;
-			status = "disabled";
-
-			ranges =
-			/*
-			 * 64MB 32bit non-prefetchable memory 0x48000000-0x4bffffff
-			 * done in 4 chunks of 16MB each.
-			 */
-			<0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
-			/* 64KB I/O space at 0x4c000000 */
-			<0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
-
-			/*
-			 * This needs to map to the start of physical memory so
-			 * PCI devices can see all (hopefully) memory. This is done
-			 * using 4 1:1 16MB windows, so the RAM should not be more than
-			 * 64 MB for this to work. If your memory is anywhere else
-			 * than at 0x0 you need to alter this.
-			 */
-			dma-ranges =
-			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
-
-			/* Each unique DTS using PCI must specify the swizzling */
-		};
-
-		uart0: serial@c8000000 {
-			compatible = "intel,xscale-uart";
-			reg = <0xc8000000 0x1000>;
-			/*
-			 * The reg-offset and reg-shift is a side effect
-			 * of running the platform in big endian mode.
-			 */
-			reg-offset = <3>;
-			reg-shift = <2>;
-			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <14745600>;
-			no-loopback-test;
-		};
-
-		uart1: serial@c8001000 {
-			compatible = "intel,xscale-uart";
-			reg = <0xc8001000 0x1000>;
-			/*
-			 * The reg-offset and reg-shift is a side effect
-			 * of running the platform in big endian mode.
-			 */
-			reg-offset = <3>;
-			reg-shift = <2>;
-			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <14745600>;
-			no-loopback-test;
-		};
-
-		gpio0: gpio@c8004000 {
-			compatible = "intel,ixp4xx-gpio";
-			reg = <0xc8004000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		intcon: interrupt-controller@c8003000 {
-			/*
-			 * Note: no compatible string. The subvariant of the
-			 * chip needs to define what version it is. The
-			 * location of the interrupt controller is fixed in
-			 * memory across all variants.
-			 */
-			reg = <0xc8003000 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		timer@c8005000 {
-			compatible = "intel,ixp4xx-timer";
-			reg = <0xc8005000 0x100>;
-			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		npe: npe@c8006000 {
-			compatible = "intel,ixp4xx-network-processing-engine";
-			reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* NPE-A contains two high-speed serial links */
-			hss@0 {
-				compatible = "intel,ixp4xx-hss";
-				reg = <0>;
-				intel,npe-handle = <&npe 0>;
-				status = "disabled";
-			};
-
-			hss@1 {
-				compatible = "intel,ixp4xx-hss";
-				reg = <1>;
-				intel,npe-handle = <&npe 0>;
-				status = "disabled";
-			};
-
-			/* NPE-C contains a crypto accelerator */
-			crypto {
-				compatible = "intel,ixp4xx-crypto";
-				intel,npe-handle = <&npe 2>;
-				queue-rx = <&qmgr 30>;
-				queue-txready = <&qmgr 29>;
-			};
-		};
-
-		/* This is known as EthB */
-		ethernet@c8009000 {
-			compatible = "intel,ixp4xx-ethernet";
-			reg = <0xc8009000 0x1000>;
-			status = "disabled";
-			/* Dummy values that depend on firmware */
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			intel,npe-handle = <&npe 1>;
-		};
-
-		/* This is known as EthC */
-		ethernet@c800a000 {
-			compatible = "intel,ixp4xx-ethernet";
-			reg = <0xc800a000 0x1000>;
-			status = "disabled";
-			/* Dummy values that depend on firmware */
-			queue-rx = <&qmgr 0>;
-			queue-txready = <&qmgr 0>;
-			intel,npe-handle = <&npe 2>;
-		};
-
-		/* This is known as EthA */
-		ethernet@c800c000 {
-			compatible = "intel,ixp4xx-ethernet";
-			reg = <0xc800c000 0x1000>;
-			status = "disabled";
-			intel,npe = <0>;
-			/* Dummy values that depend on firmware */
-			queue-rx = <&qmgr 0>;
-			queue-txready = <&qmgr 0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel/Makefile b/arch/arm/boot/dts/intel/Makefile
new file mode 100644
index 0000000000000..c5fc845deb61c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-y += axm
+subdir-y += ixp
+subdir-y += pxa
+subdir-y += socfpga
diff --git a/arch/arm/boot/dts/intel/axm/Makefile b/arch/arm/boot/dts/intel/axm/Makefile
new file mode 100644
index 0000000000000..7c7dc679964d1
--- /dev/null
+++ b/arch/arm/boot/dts/intel/axm/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AXXIA) += \
+	axm5516-amarillo.dtb
+dtb-$(CONFIG_ARCH_AXXIA) += \
+	axm5516-amarillo.dtb
diff --git a/arch/arm/boot/dts/intel/axm/axm5516-amarillo.dts b/arch/arm/boot/dts/intel/axm/axm5516-amarillo.dts
new file mode 100644
index 0000000000000..2e2ad3c7ee776
--- /dev/null
+++ b/arch/arm/boot/dts/intel/axm/axm5516-amarillo.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/boot/dts/axm5516-amarillo.dts
+ *
+ * Copyright (C) 2013 LSI
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00400000;
+
+#include "axm55xx.dtsi"
+#include "axm5516-cpus.dtsi"
+
+/ {
+	model = "Amarillo AXM5516";
+	compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0x02 0x00000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/axm/axm5516-cpus.dtsi b/arch/arm/boot/dts/intel/axm/axm5516-cpus.dtsi
new file mode 100644
index 0000000000000..f13ef80b66373
--- /dev/null
+++ b/arch/arm/boot/dts/intel/axm/axm5516-cpus.dtsi
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/boot/dts/axm5516-cpus.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+				core1 {
+					cpu = <&CPU9>;
+				};
+				core2 {
+					cpu = <&CPU10>;
+				};
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU12>;
+				};
+				core1 {
+					cpu = <&CPU13>;
+				};
+				core2 {
+					cpu = <&CPU14>;
+				};
+				core3 {
+					cpu = <&CPU15>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x00>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x01>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x02>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x03>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x102>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x103>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x200>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x201>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x202>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x203>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x300>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x301>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x302>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x303>;
+			clock-frequency = <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/axm/axm55xx.dtsi b/arch/arm/boot/dts/intel/axm/axm55xx.dtsi
new file mode 100644
index 0000000000000..5277890cfad2e
--- /dev/null
+++ b/arch/arm/boot/dts/intel/axm/axm55xx.dtsi
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/boot/dts/axm55xx.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/lsi,axm5516-clks.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0	  = &serial0;
+		serial1   = &serial1;
+		serial2	  = &serial2;
+		serial3	  = &serial3;
+		timer	  = &timer0;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clk_ref0: clk_ref0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clk_ref1: clk_ref1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clk_ref2: clk_ref2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clks: clock-controller@2010020000 {
+			compatible = "lsi,axm5516-clks";
+			#clock-cells = <1>;
+			reg = <0x20 0x10020000 0 0x20000>;
+		};
+	};
+
+	gic: interrupt-controller@2001001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x20 0x01001000 0 0x1000>,
+		      <0x20 0x01002000 0 0x2000>,
+		      <0x20 0x01004000 0 0x2000>,
+		      <0x20 0x01006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		device_type = "soc";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		syscon: syscon@2010030000 {
+			compatible = "lsi,axxia-syscon", "syscon";
+			reg = <0x20 0x10030000 0 0x2000>;
+		};
+
+		reset: reset@2010031000 {
+			compatible = "lsi,axm55xx-reset";
+			syscon = <&syscon>;
+		};
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			serial0: serial@2010080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10080000 0 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial1: serial@2010081000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10081000 0 0x1000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial2: serial@2010082000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10082000 0 0x1000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial3: serial@2010083000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10083000 0 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			timer0: timer@2010091000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x20 0x10091000 0 0x1000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "okay";
+			};
+
+			gpio0: gpio@2010092000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0x20 0x10092000 0x00 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			gpio1: gpio@2010093000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0x20 0x10093000 0x00 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
+
+/*
+  Local Variables:
+  mode: C
+  End:
+*/
diff --git a/arch/arm/boot/dts/intel/ixp/Makefile b/arch/arm/boot/dts/intel/ixp/Makefile
new file mode 100644
index 0000000000000..1a25ce3cf84f0
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/Makefile
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_IXP4XX) += \
+	intel-ixp42x-linksys-nslu2.dtb \
+	intel-ixp42x-linksys-wrv54g.dtb \
+	intel-ixp42x-freecom-fsg-3.dtb \
+	intel-ixp42x-welltech-epbx100.dtb \
+	intel-ixp42x-ixdp425.dtb \
+	intel-ixp43x-kixrp435.dtb \
+	intel-ixp46x-ixdp465.dtb \
+	intel-ixp42x-adi-coyote.dtb \
+	intel-ixp42x-ixdpg425.dtb \
+	intel-ixp42x-goramo-multilink.dtb \
+	intel-ixp42x-iomega-nas100d.dtb \
+	intel-ixp42x-dlink-dsm-g600.dtb \
+	intel-ixp42x-gateworks-gw2348.dtb \
+	intel-ixp43x-gateworks-gw2358.dtb \
+	intel-ixp42x-netgear-wg302v1.dtb \
+	intel-ixp42x-arcom-vulcan.dtb \
+	intel-ixp42x-gateway-7001.dtb
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-adi-coyote.dts
new file mode 100644
index 0000000000000..765ab36e6f0c5
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-adi-coyote.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for ADI Engineering Coyote platform.
+ * Derived from boardfiles written by MontaVista software.
+ * Ethernet set-up from OpenWrt.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ADI Engineering Coyote reference design";
+	compatible = "adieng,coyote", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* CHECKME: 16 MB SDRAM minimum, maybe the Coyote actually has more */
+		device_type = "memory";
+		reg = <0x00000000 0x01000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* These are switched around */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 32 MB of Flash in 128 0x20000 sized blocks
+				 * mapped in at CS0 and CS1
+				 */
+				reg = <0 0x00000000 0x2000000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* CHECKME: guess this is Redboot FIS */
+					fis-index-block = <0x1ff>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from Coyote PCI boardfile.
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 6 */
+			<0x0800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 6 */
+			<0x0800 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 6 */
+			<0x0800 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 6 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
+			<0x1000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 11 */
+			<0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 11 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-arcom-vulcan.dts
new file mode 100644
index 0000000000000..6f5b4e4eb1ccb
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-arcom-vulcan.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Arcom/Eurotech Vulcan board.
+ * This board is a single board computer in the PC/104 form factor based on
+ * IXP425, and was released around 2005. It previously had the name "Mercury".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Arcom/Eurotech Vulcan";
+	compatible = "arcom,vulcan", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		/* CHECKME: using a harddrive at /dev/sda1 as rootfs by default */
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 32 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0 and CS1.
+				 *
+				 * The documentation mentions the existence
+				 * of a 16MB version, which we conveniently
+				 * ignore. Shout if you own one!
+				 */
+				reg = <0 0x00000000 0x2000000>;
+
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-t3 = <3>;
+				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x1ff>;
+				};
+			};
+			sram@2,0 {
+				/* 256 KB SDRAM memory at CS2 */
+				compatible = "shared-dma-pool";
+				device_type = "memory";
+				reg = <2 0x00000000 0x40000>;
+				no-map;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-t3 = <1>;
+				intel,ixp4xx-eb-t4 = <2>;
+				intel,ixp4xx-eb-ahb-split-transfers = <1>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+			serial@3,0 {
+				/*
+				 * 8250-compatible Exar XR16L2551 2 x UART
+				 *
+				 * CHECKME: if special tweaks are needed, then fix the
+				 * operating system to handle it.
+				 */
+				compatible = "exar,xr16l2551", "ns8250";
+				reg = <3 0x00000000 0x10>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				clock-frequency = <1843200>;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-t3 = <3>;
+				intel,ixp4xx-eb-cycle-type = <1>; /* Motorola cycles */
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+			gpio1: gpio@4,0 {
+				/*
+				 * MMIO GPIO in one byte
+				 */
+				compatible = "arcom,vulcan-gpio";
+				reg = <4 0x00000000 0x1>;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+			watchdog@5,0 {
+				compatible = "maxim,max6369";
+				reg = <5 0x00000000 0x1>;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from Vulcan PCI boardfile.
+			 *
+			 * We have 2 slots (IDSEL) 1 and 2 with one dedicated interrupt
+			 * per slot. This interrupt is shared (OR:ed) by all four pins.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 2 */
+			<0x0800 0 0 2 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 2 */
+			<0x0800 0 0 3 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 2 */
+			<0x0800 0 0 4 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 2 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 3 */
+			<0x1000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 3 */
+			<0x1000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 3 */
+			<0x1000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 3 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
new file mode 100644
index 0000000000000..b9d46eb065078
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for D-Link DSM-G600 revision A based on IXP420
+ * NOTE: revision B of this device uses PowerPC and is NOT supported by
+ * this device tree.
+ *
+ * Inspired by the boardfile by Rod Whitby, Tower Technologies, Alessandro Zummo
+ * and Michael Westerhof.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DSM-G600 rev A";
+	compatible = "dlink,dsm-g600-a", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "dsmg600:green:power";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wlan {
+			label = "dsmg600:green:wlan";
+			/* CHECKME: flagged as active low in the old board file */
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			/* We don't have WLAN trigger in the kernel (yet) */
+			linux,default-trigger = "netdev";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys_polled {
+		compatible = "gpio-keys-polled";
+
+		/*
+		 * According to the board file this key cannot handle interrupts and
+		 * need to be polled. Investigate if this is really the case or if
+		 * this can be moved adjacent to the ordinary gpio-keys above.
+		 */
+		button-power {
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <5000>;
+	};
+
+	soc {
+		bus@c4000000 {
+			/* The first 16MB region at CS0 on the expansion bus */
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 16 MB of Flash in 128 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/*
+					 * A boot log says the directory is at 0xfe0000
+					 * 0x7f * 0x20000 = 0xfe0000
+					 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c)
+			 * We have slots (IDSEL) 1, 2, 3, 4 and pins 1, 2 and 3.
+			 * Only slot 3 have three IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 7  IRQ_TYPE_LEVEL_LOW>, /* INT E on slot 1 is irq 7 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 10 */
+			<0x1800 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 9 */
+			<0x1800 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 8 */
+			/* IDSEL 4 */
+			<0x2000 0 0 3 &gpio0 6  IRQ_TYPE_LEVEL_LOW>; /* INT F on slot 4 is irq 6 */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
new file mode 100644
index 0000000000000..5a5e16cc7335e
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Freecom FSG-3 router.
+ * This machine is based on IXP425.
+ * This device tree is inspired by the board file by Rod Whitby.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Freecom FSG-3";
+	compatible = "freecom,fsg-3", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB memory */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		/* Boot from the first partition on the hard drive */
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-sync {
+			wakeup-source;
+			/* Closest approximation of what the key should do */
+			linux,code = <KEY_CONNECT>;
+			label = "sync";
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+		button-usb {
+			wakeup-source;
+			/* Unplug USB, closest approximation of what the key should do */
+			linux,code = <KEY_EJECTCD>;
+			label = "usb";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			/*
+			 * Temperature sensor and fan control chip.
+			 *
+			 * TODO: create a proper device tree binding for
+			 * the sensor and temperature zone and create a
+			 * zone with fan control.
+			 */
+			compatible = "winbond,w83781d";
+			reg = <0x28>;
+		};
+		rtc@6f {
+			compatible = "isil,isl1208";
+			reg = <0x6f>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 4 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x400000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x3e0000 */
+					fis-index-block = <0x1f>;
+				};
+			};
+
+			/* Small syscon with some LEDs at CS2 */
+			syscon@2,0 {
+				compatible = "freecom,fsg-cs2-system-controller", "syscon";
+				reg = <2 0x0 0x200>;
+				reg-io-width = <2>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <2 0x0 0x0 0x200>;
+
+				led@0,0 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x01>;
+					label = "fsg:blue:wlan";
+					linux,default-trigger = "wlan";
+					default-state = "on";
+				};
+				led@0,1 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x02>;
+					label = "fsg:blue:wan";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,2 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x04>;
+					label = "fsg:blue:sata";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,3 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x04>;
+					label = "fsg:blue:usb";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,4 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x08>;
+					label = "fsg:blue:sync";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,5 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x10>;
+					label = "fsg:blue:ring";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Written based on the FSG-3 PCI boardfile.
+			 * We have slots 12, 13 & 14 (IDSEL) with one IRQ each.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 12 */
+			<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
+			<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
+			<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
+			<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
+			<0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
+			<0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
+			<0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
+			<0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
+			<0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
new file mode 100644
index 0000000000000..4d70f6afd13ab
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Gateway 7001 AP based on IXP422
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gateway 7001 AP";
+	compatible = "gateway,7001", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* second UART is the primary console */
+		serial0 = &uart1;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of flash
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x7e0000 */
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c)
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 11 */
+			<0x0800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 11 */
+			<0x0800 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 11 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */
+			<0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */
+			<0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy2>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateworks-gw2348.dts
new file mode 100644
index 0000000000000..97e3f25bb210f
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateworks-gw2348.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Gateworks Avila GW2348 board.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gateworks Avila GW2348";
+	compatible = "gateworks,gw2348", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-user {
+			label = "gw2348:green:user";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			compatible = "adi,ad7418";
+			reg = <0x28>;
+		};
+		rtc: ds1672@68 {
+			compatible = "dallas,ds1672";
+			reg = <0x68>;
+		};
+		eeprom@51 {
+			compatible = "atmel,24c08";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <1024>;
+			read-only;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+			ide@1,0 {
+				compatible = "intel,ixp4xx-compact-flash";
+				/*
+				 * Set up expansion bus config to a really slow timing.
+				 * The CF driver will dynamically reconfigure these timings
+				 * depending on selected PIO mode (0-4).
+				 */
+				intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
+				intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
+				intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+				intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+				intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+				/* First register set is CMD second is CTL (notice it uses CS2) */
+				reg = <1 0x00000000 0x1000000>, <2 0x00000000 0x1000000>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+			};
+			/*
+			 * FIXME: Latch LEDs or extra UARTs at CS4
+			 */
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from Avila PCI boardfile.
+			 *
+			 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+			/* IDSEL 4 */
+			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
+			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
+			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
+			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
new file mode 100644
index 0000000000000..9ec0169bacf8c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Goramo MultiLink Router
+ * There are two variants:
+ * - MultiLink Basic (a box)
+ * - MultiLink Max (19" rack mount)
+ * This device tree supports MultiLink Basic.
+ * This machine is based on IXP425.
+ * This is one of the few devices supporting the IXP4xx High-Speed Serial
+ * (HSS) link for a V.35 WAN interface.
+ * The hardware originates in Poland.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Goramo MultiLink Router";
+	compatible = "goramo,multilink-router", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/*
+		 * 64 MB of RAM according to the manual. The MultiLink
+		 * Max has 128 MB.
+		 */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	/*
+	 * 74HC4094 which is used as a rudimentary GPIO expander
+	 * FIXME:
+	 * - Create device tree bindings for this as GPIO expander
+	 * - Write a pure DT GPIO driver using these bindings
+	 * - Support cascading in the style of gpio-74x164.c (cannot be reused, very different)
+	 */
+	gpio_74: gpio-74hc4094 {
+		compatible = "nxp,74hc4094";
+		cp-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		d-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		str-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		/* oe-gpios is optional */
+		gpio-controller;
+		#gpio-cells = <2>;
+		/* We are not cascaded */
+		registers-number = <1>;
+		gpio-line-names = "CONTROL_HSS0_CLK_INT", "CONTROL_HSS1_CLK_INT", "CONTROL_HSS0_DTR_N",
+				"CONTROL_HSS1_DTR_N", "CONTROL_EXT", "CONTROL_AUTO_RESET",
+				"CONTROL_PCI_RESET_N", "CONTROL_EEPROM_WC_N";
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * The device has 4 slots (IDSEL) with one dedicated IRQ per slot.
+			 * The slots have Ethernet, Ethernet, NEC and MPCI.
+			 * The IDSELs are 11, 12, 13, 14.
+			 */
+			interrupt-map =
+			/* IDSEL 11 - Ethernet A */
+			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
+			<0x5800 0 0 2 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 11 is irq 4 */
+			<0x5800 0 0 3 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 11 is irq 4 */
+			<0x5800 0 0 4 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 11 is irq 4 */
+			/* IDSEL 12 - Ethernet B */
+			<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
+			<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
+			<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
+			<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
+			/* IDSEL 13 - MPCI */
+			<0x6800 0 0 1 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 12 */
+			<0x6800 0 0 2 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 12 */
+			<0x6800 0 0 3 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 12 */
+			<0x6800 0 0 4 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 12 */
+			/* IDSEL 14 - NEC */
+			<0x7000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 3 */
+			<0x7000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 3 */
+			<0x7000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 3 */
+			<0x7000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 3 */
+		};
+
+		/* HSS links */
+		npe@c8006000 {
+			hss@0 {
+				status = "okay";
+				intel,queue-chl-rxtrig = <&qmgr 12>;
+				intel,queue-chl-txready = <&qmgr 34>;
+				intel,queue-pkt-rx = <&qmgr 13>;
+				intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
+				intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
+				intel,queue-pkt-txdone = <&qmgr 22>;
+				/* The Goramo GPIO-based clock etc control */
+				cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+				rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+				dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+				dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
+				clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
+			};
+			hss@1 {
+				status = "okay";
+				intel,queue-chl-rxtrig = <&qmgr 10>;
+				intel,queue-chl-txready = <&qmgr 35>;
+				intel,queue-pkt-rx = <&qmgr 0>;
+				intel,queue-pkt-tx = <&qmgr 5>, <&qmgr 6>, <&qmgr 7>, <&qmgr 8>;
+				intel,queue-pkt-rxfree = <&qmgr 1>, <&qmgr 2>, <&qmgr 3>, <&qmgr 4>;
+				intel,queue-pkt-txdone = <&qmgr 9>;
+				/* The Goramo GPIO-based clock etc control */
+				cts-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+				rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+				dcd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+				dtr-gpios = <&gpio_74 3 GPIO_ACTIVE_LOW>;
+				clk-internal-gpios = <&gpio_74 1 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 32>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 33>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts
new file mode 100644
index 0000000000000..8da6823e1dbe6
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Iomega NAS 100D
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Iomega NAS 100D";
+	compatible = "iom,nas-100d", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-wlan {
+			label = "nas100d:red:wlan";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			/* We don't have WLAN trigger in the kernel (yet) */
+			linux,default-trigger = "netdev";
+		};
+		led-disk {
+			label = "nas100d:red:disk";
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "disk-activity";
+		};
+		led-power {
+			label = "nas100d:red:power";
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <5000>;
+	};
+
+	soc {
+		bus@c4000000 {
+			/* The first 16MB region at CS0 on the expansion bus */
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x7e0000 */
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from NAS 100D PCI boardfile (nas100d-pci.c)
+			 * We have slots (IDSEL) 1, 2 and 3 and pins 1, 2 and 3.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 7  IRQ_TYPE_LEVEL_LOW>; /* INT C on slot 3 is irq 7 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdp425.dts
new file mode 100644
index 0000000000000..194945748dc3c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdp425.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDP425 also known as IXCDP1100 Control Plane
+ * processor reference design.
+ *
+ * This platform has the codename "Richfield".
+ *
+ * This machine is based on a 533 MHz IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel IXDP425/IXCDP1100 Richfield Reference Design";
+	compatible = "intel,ixdp425", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdpg425.dts
new file mode 100644
index 0000000000000..7011fea6205bd
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdpg425.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDPG425 reference design.
+ * Derived from boardfiles written by MontaVista software.
+ * Ethernet set-up from OpenWrt.
+ *
+ * The device has 4 x FXS RJ11 ports for analog phones for
+ * internet telephony. (Not supported yet.)
+ *
+ * The device has 9 status LEDs we do not support yet.
+ *
+ * This device is very similar to ADI engingeering Coyote.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel IXDPG425 reference design";
+	compatible = "intel,ixdpg425", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * CHECKME: the product brief says 16MB in a flash
+				 * socket.
+				 */
+				reg = <0 0x00000000 0x1000000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* CHECKME: guess this is Redboot FIS */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from IXDPG425 PCI boardfile.
+			 * We have slots (IDSEL) 12, 13 and 14 with one assigned IRQ
+			 * for 12 & 13 and one for 14.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 12 */
+			<0x6000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 7 */
+			<0x6000 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 7 */
+			<0x6000 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 7 */
+			<0x6000 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 7 */
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
+			<0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
+			<0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
+			<0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
+			<0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
+			<0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
+		};
+
+		/*
+		 * CHECKME: this ethernet setup seems dubious. Photos of the board shows some kind
+		 * of Realtek DSA switch on the board.
+		 */
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
new file mode 100644
index 0000000000000..da1e93212b86e
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Linksys NSLU2
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives)";
+	compatible = "linksys,nslu2", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-status {
+			label = "nslu2:red:status";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-ready {
+			label = "nslu2:green:ready";
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led-disk-1 {
+			label = "nslu2:green:disk-1";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-disk-2 {
+			label = "nslu2:green:disk-2";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6f {
+			compatible = "xicor,x1205";
+			reg = <0x6f>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <5000>;
+	};
+
+	gpio-beeper {
+		compatible = "gpio-beeper";
+		gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	soc {
+		bus@c4000000 {
+			/* The first 16MB region at CS0 on the expansion bus */
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x7e0000 */
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
+			 * We have slots (IDSEL) 1, 2 and 3.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
+			<0x1000 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 8 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+			<0x1800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+			<0x1800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 8 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts
new file mode 100644
index 0000000000000..4aba9e0214a0b
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Linksys WRV54G router
+ * Also known as Gemtek GTWX5715
+ * Based on a board file by George T. Joseph and other patches.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Linksys WRV54G / Gemtek GTWX5715";
+	compatible = "linksys,wrv54g", "gemtek,gtwx5715", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB memory */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* UART2 is the primary console */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	/* There is an unpopulated LED slot (3) connected to GPIO 8 */
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "wrv54g:yellow:power";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wireless {
+			label = "wrv54g:yellow:wireless";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led-internet {
+			label = "wrv54g:yellow:internet";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led-dmz {
+			label = "wrv54g:green:dmz";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	/* This set-up comes from an OpenWrt patch */
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		switch@0 {
+			compatible = "micrel,ks8995";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 8 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x00800000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					/*
+					 * Partition info from a boot log
+					 * CHECKME: not using redboot? FIS index 0x3f @7e00000?
+					 */
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "boot";
+						reg = <0x0 0x140000>;
+						read-only;
+					};
+					partition@140000 {
+						label = "linux";
+						reg = <0x140000 0x100000>;
+						read-only;
+					};
+					partition@240000 {
+						label = "root";
+						reg = <0x240000 0x480000>;
+						read-write;
+					};
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
+			 * Derived from the GTWX5715 PCI boardfile.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 0 */
+			<0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */
+			<0x0000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 0 is irq 11 */
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 1 is irq 10 */
+		};
+
+		/*
+		 * EthB - connected to the KS8995 switch ports 1-4
+		 * FIXME: the boardfile defines .phy_mask = 0x1e for this port to enable output to
+		 * all four switch ports, also using an out of tree multiphy patch.
+		 * Do we need a new binding and property for this?
+		 */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* Should be ports 1-4 on the KS8995 switch */
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				/* Should be port 5 on the KS8995 switch */
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC - connected to KS8995 switch port 5 */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
new file mode 100644
index 0000000000000..19d56e9aec9d8
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Netgear WG302v2 based on IXP422BB
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear WG302 v1";
+	compatible = "netgear,wg302v1", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM according to boot arguments */
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		/* The RedBoot comes up in 9600 baud so let's keep this */
+		bootargs = "console=ttyS0,9600n8";
+		stdout-path = "uart1:9600n8";
+	};
+
+	aliases {
+		/* These are switched around */
+		serial0 = &uart1;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 64 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c)
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
+			<0x0800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 8 */
+			<0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */
+			<0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 9 */
+			<0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 9 */
+			<0x1000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 9 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy30>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy30: ethernet-phy@30 {
+					reg = <30>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-welltech-epbx100.dts
new file mode 100644
index 0000000000000..c550c421b659c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-welltech-epbx100.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+
+/ {
+	model = "Welltech EPBX100";
+	compatible = "welltech,epbx100", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/ram0 initrd=0x00800000,9M";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 16 MB of Flash
+				 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "RedBoot";
+						reg = <0x00000000 0x00080000>;
+						read-only;
+					};
+					partition@80000 {
+						label = "zImage";
+						reg = <0x00080000 0x00100000>;
+						read-only;
+					};
+					partition@180000 {
+						label = "ramdisk";
+						reg = <0x00180000 0x00300000>;
+						read-only;
+					};
+					partition@480000 {
+						label = "User";
+						reg = <0x00480000 0x00b60000>;
+						read-only;
+					};
+					partition@fe0000 {
+						label = "FIS directory";
+						reg = <0x00fe0000 0x001f000>;
+						read-only;
+					};
+					partition@fff000 {
+						label = "RedBoot config";
+						reg = <0x00fff000 0x0001000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		/* LAN port */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x.dtsi
new file mode 100644
index 0000000000000..84cee8ec3ab81
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 42x series. This series has 32 interrupts.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		bus@c4000000 {
+			compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
+			reg = <0xc4000000 0x30>;
+		};
+
+		pci@c0000000 {
+			compatible = "intel,ixp42x-pci";
+		};
+
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp42x-interrupt";
+		};
+
+		/*
+		 * This is the USB Device Mode (UDC) controller, which is used
+		 * to present the IXP4xx as a device on a USB bus.
+		 */
+		usb@c800b000 {
+			compatible = "intel,ixp4xx-udc";
+			reg = <0xc800b000 0x1000>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-gateworks-gw2358.dts
new file mode 100644
index 0000000000000..1db849515f9e9
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-gateworks-gw2358.dts
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Gateworks IXP43x-based Cambria GW2358
+ */
+
+/dts-v1/;
+
+#include "intel-ixp43x.dtsi"
+
+/ {
+	model = "Gateworks Cambria GW2358";
+	compatible = "gateworks,gw2358", "intel,ixp43x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-user {
+			label = "gw2358:green:LED";
+			gpios = <&pld1 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			compatible = "adi,ad7418";
+			reg = <0x28>;
+		};
+		rtc: ds1672@68 {
+			compatible = "dallas,ds1672";
+			reg = <0x68>;
+		};
+		eeprom@51 {
+			compatible = "atmel,24c08";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <1024>;
+			read-only;
+		};
+		pld0: pld@56 {
+			compatible = "gateworks,pld-gpio";
+			reg = <0x56>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		/* This PLD just handles the LED and user button */
+		pld1: pld@57 {
+			compatible = "gateworks,pld-gpio";
+			reg = <0x57>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/*
+				 * 32 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0 and CS1
+				 */
+				reg = <0 0x00000000 0x2000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x1fe0000 */
+					fis-index-block = <0xff>;
+				};
+			};
+			ide@3,0 {
+				compatible = "intel,ixp4xx-compact-flash";
+				/*
+				 * Set up expansion bus config to a really slow timing.
+				 * The CF driver will dynamically reconfigure these timings
+				 * depending on selected PIO mode (0-4).
+				 */
+				intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
+				intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
+				intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+				intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+				intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+				/* First register set is CMD second is CTL */
+				reg = <3 0xe00000 0x40000>, <3 0xe40000 0x40000>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * In the boardfile for the Cambria from OpenWRT the interrupts
+			 * are assigned one per IDSEL, so all 4 interrupts from IDSEL
+			 * 1 are connected to IRQ 11, all 4 interrupts from IDSEL 2
+			 * connected to IRQ 10 etc. I find this highly unlikely so I
+			 * have instead assumed that they are rotated (swizzled) like
+			 * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+			/* IDSEL 4 */
+			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
+			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 9 */
+			/* IDSEL 6 */
+			<0x3000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 10 */
+			<0x3000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 9 */
+			<0x3000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 8 */
+			<0x3000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 11 */
+			/* IDSEL 15 */
+			<0x7800 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
+			<0x7800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+			<0x7800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+			<0x7800 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 9 */
+		};
+
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
+		};
+
+		ethernet@c800c000 {
+			status = "okay";
+			queue-rx = <&qmgr 2>;
+			queue-txready = <&qmgr 19>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy2>;
+			intel,npe-handle = <&npe 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-kixrp435.dts
new file mode 100644
index 0000000000000..4703a8b24765f
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-kixrp435.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel KIXRP435 Control Plane
+ * processor reference design.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp43x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel KIXRP435 Reference Design";
+	compatible = "intel,kixrp435", "intel,ixp43x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		/* CHECKME: ethernet set-up taken from Gateworks Cambria */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
+		};
+
+		ethernet@c800c000 {
+			status = "okay";
+			queue-rx = <&qmgr 2>;
+			queue-txready = <&qmgr 19>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy2>;
+			intel,npe-handle = <&npe 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp43x.dtsi
new file mode 100644
index 0000000000000..60bf9903e0f8c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp43x.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 43x series. This series has 64 interrupts and adds a few more
+ * peripherals over the 42x series.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		bus@c4000000 {
+			compatible = "intel,ixp43x-expansion-bus-controller", "syscon";
+			/* Uses at least up to 0x230 */
+			reg = <0xc4000000 0x1000>;
+		};
+
+		pci@c0000000 {
+			compatible = "intel,ixp43x-pci";
+		};
+
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp43x-interrupt";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi
new file mode 100644
index 0000000000000..1dd4a65cb7a68
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP45x and IXP46x series. This series has 64 interrupts and adds a
+ * few more peripherals over the 42x and 43x series so this extends the
+ * basic IXP4xx DTSI.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		bus@c4000000 {
+			compatible = "intel,ixp46x-expansion-bus-controller", "syscon";
+			/* Uses at least up to 0x124 */
+			reg = <0xc4000000 0x1000>;
+		};
+
+		rng@70002100 {
+			compatible = "intel,ixp46x-rng";
+			reg = <0x70002100 4>;
+		};
+
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp43x-interrupt";
+		};
+
+		/*
+		 * This is the USB Device Mode (UDC) controller, which is used
+		 * to present the IXP4xx as a device on a USB bus.
+		 */
+		usb@c800b000 {
+			compatible = "intel,ixp4xx-udc";
+			reg = <0xc800b000 0x1000>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c@c8011000 {
+			compatible = "intel,ixp4xx-i2c";
+			reg = <0xc8011000 0x18>;
+			interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		/* This is known as EthB1 */
+		ethernet@c800d000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800d000 0x1000>;
+			status = "disabled";
+			intel,npe = <1>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
+
+		/* This is known as EthB2 */
+		ethernet@c800e000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800e000 0x1000>;
+			status = "disabled";
+			intel,npe = <2>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
+
+		/* This is known as EthB3 */
+		ethernet@c800f000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800f000 0x1000>;
+			status = "disabled";
+			intel,npe = <3>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
+
+		ptp-timer@c8010000 {
+			compatible = "intel,ixp46x-ptp-timer";
+			reg = <0xc8010000 0x1000>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>;
+			interrupt-names = "master", "slave";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp46x-ixdp465.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp46x-ixdp465.dts
new file mode 100644
index 0000000000000..a062cd1a6588d
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp46x-ixdp465.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDP465 Control Plane processor reference
+ * design, codename "BMP".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp45x-ixp46x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel IXDP465 BMP Reference Design";
+	compatible = "intel,ixdp465", "intel,ixp46x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 32 MB of Flash mapped in at CS0 and CS1 */
+				reg = <0 0x00000000 0x2000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x1fe0000 */
+					fis-index-block = <0xff>;
+				};
+			};
+		};
+		/* TODO: configure ethernet etc */
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx-reference-design.dtsi
new file mode 100644
index 0000000000000..31c0a69771c47
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx-reference-design.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree include file for Intel reference designs for the
+ * XScale Network Processors in the IXP 4xx series. Common device
+ * set-up for IXDP425, IXCDP1100, KIXRP435 and IXDP465.
+ */
+
+/ {
+	memory@0 {
+		/*
+		 * The board supports up to 256 MB of memory. Here we put in
+		 * 64 MB and this may be modified by the boot loader.
+		 */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eeprom@50 {
+			/*
+			 * Philips PCF8582C-2T/03 512byte I2C EEPROM
+			 * should behave like an Atmel 24c04.
+			 */
+			compatible = "atmel,24c04";
+			reg = <0x50>;
+			pagesize = <16>;
+			size = <512>;
+			read-only;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			/* Flash memory defined per-variant */
+			nand-controller@3,0 {
+				/* Some designs have a NAND on CS3 enable it here if present */
+				status = "disabled";
+
+				/*
+				 * gen_nand needs to be extended and documented to get
+				 * command byte = 1 and address byte = 2 from the device
+				 * tree.
+				 */
+				compatible = "gen_nand";
+
+				/* Expansion bus set-up */
+				intel,ixp4xx-eb-t1 = <0>;
+				intel,ixp4xx-eb-t2 = <0>;
+				intel,ixp4xx-eb-t3 = <1>; // 1 cycle extra strobe phase
+				intel,ixp4xx-eb-t4 = <0>;
+				intel,ixp4xx-eb-t5 = <0>;
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+				intel,ixp4xx-eb-byte-access-on-halfword = <0>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+
+				/* 512 bytes memory window */
+				reg = <3 0x00000000 0x200>;
+				nand-on-flash-bbt;
+				nand-ecc-mode = "soft_bch";
+				nand-ecc-step-size = <512>;
+				nand-ecc-strength = <4>;
+				nce-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* NCE */
+
+				label = "ixp400 NAND";
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					fs@0 {
+						label = "ixp400 NAND FS 0";
+						reg = <0x0 0x800000>;
+					};
+					fs@800000 {
+						label = "ixp400 NAND FS 1";
+						reg = <0x800000 0x0>;
+					};
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from IXDP425 PCI boardfile.
+			 * PCI slots on the BIXMB425BD base card.
+			 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+			/* IDSEL 4 */
+			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
+			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
+			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
+			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
new file mode 100644
index 0000000000000..51a716c596698
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 4xx series.
+ */
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&intcon>;
+
+		/*
+		 * The IXP4xx expansion bus is a set of up to 7 each up to 16MB
+		 * windows in the 256MB space from 0x50000000 to 0x5fffffff.
+		 */
+		bus@c4000000 {
+			/* compatible and reg filled in by per-soc device tree */
+			native-endian;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x50000000 0x01000000>,
+				 <1 0x0 0x51000000 0x01000000>,
+				 <2 0x0 0x52000000 0x01000000>,
+				 <3 0x0 0x53000000 0x01000000>,
+				 <4 0x0 0x54000000 0x01000000>,
+				 <5 0x0 0x55000000 0x01000000>,
+				 <6 0x0 0x56000000 0x01000000>,
+				 <7 0x0 0x57000000 0x01000000>;
+			dma-ranges = <0 0x0 0x50000000 0x01000000>,
+				 <1 0x0 0x51000000 0x01000000>,
+				 <2 0x0 0x52000000 0x01000000>,
+				 <3 0x0 0x53000000 0x01000000>,
+				 <4 0x0 0x54000000 0x01000000>,
+				 <5 0x0 0x55000000 0x01000000>,
+				 <6 0x0 0x56000000 0x01000000>,
+				 <7 0x0 0x57000000 0x01000000>;
+		};
+
+		qmgr: queue-manager@60000000 {
+			compatible = "intel,ixp4xx-ahb-queue-manager";
+			reg = <0x60000000 0x4000>;
+			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pci@c0000000 {
+			/* compatible filled in by per-soc device tree */
+			reg = <0xc0000000 0x1000>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+				     <9 IRQ_TYPE_LEVEL_HIGH>,
+				     <10 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			ranges =
+			/*
+			 * 64MB 32bit non-prefetchable memory 0x48000000-0x4bffffff
+			 * done in 4 chunks of 16MB each.
+			 */
+			<0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+			/* 64KB I/O space at 0x4c000000 */
+			<0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+
+			/*
+			 * This needs to map to the start of physical memory so
+			 * PCI devices can see all (hopefully) memory. This is done
+			 * using 4 1:1 16MB windows, so the RAM should not be more than
+			 * 64 MB for this to work. If your memory is anywhere else
+			 * than at 0x0 you need to alter this.
+			 */
+			dma-ranges =
+			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+			/* Each unique DTS using PCI must specify the swizzling */
+		};
+
+		uart0: serial@c8000000 {
+			compatible = "intel,xscale-uart";
+			reg = <0xc8000000 0x1000>;
+			/*
+			 * The reg-offset and reg-shift is a side effect
+			 * of running the platform in big endian mode.
+			 */
+			reg-offset = <3>;
+			reg-shift = <2>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <14745600>;
+			no-loopback-test;
+		};
+
+		uart1: serial@c8001000 {
+			compatible = "intel,xscale-uart";
+			reg = <0xc8001000 0x1000>;
+			/*
+			 * The reg-offset and reg-shift is a side effect
+			 * of running the platform in big endian mode.
+			 */
+			reg-offset = <3>;
+			reg-shift = <2>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <14745600>;
+			no-loopback-test;
+		};
+
+		gpio0: gpio@c8004000 {
+			compatible = "intel,ixp4xx-gpio";
+			reg = <0xc8004000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		intcon: interrupt-controller@c8003000 {
+			/*
+			 * Note: no compatible string. The subvariant of the
+			 * chip needs to define what version it is. The
+			 * location of the interrupt controller is fixed in
+			 * memory across all variants.
+			 */
+			reg = <0xc8003000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@c8005000 {
+			compatible = "intel,ixp4xx-timer";
+			reg = <0xc8005000 0x100>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		npe: npe@c8006000 {
+			compatible = "intel,ixp4xx-network-processing-engine";
+			reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* NPE-A contains two high-speed serial links */
+			hss@0 {
+				compatible = "intel,ixp4xx-hss";
+				reg = <0>;
+				intel,npe-handle = <&npe 0>;
+				status = "disabled";
+			};
+
+			hss@1 {
+				compatible = "intel,ixp4xx-hss";
+				reg = <1>;
+				intel,npe-handle = <&npe 0>;
+				status = "disabled";
+			};
+
+			/* NPE-C contains a crypto accelerator */
+			crypto {
+				compatible = "intel,ixp4xx-crypto";
+				intel,npe-handle = <&npe 2>;
+				queue-rx = <&qmgr 30>;
+				queue-txready = <&qmgr 29>;
+			};
+		};
+
+		/* This is known as EthB */
+		ethernet@c8009000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc8009000 0x1000>;
+			status = "disabled";
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			intel,npe-handle = <&npe 1>;
+		};
+
+		/* This is known as EthC */
+		ethernet@c800a000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800a000 0x1000>;
+			status = "disabled";
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+			intel,npe-handle = <&npe 2>;
+		};
+
+		/* This is known as EthA */
+		ethernet@c800c000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800c000 0x1000>;
+			status = "disabled";
+			intel,npe = <0>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/pxa/Makefile b/arch/arm/boot/dts/intel/pxa/Makefile
new file mode 100644
index 0000000000000..24d5240f08e7e
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_PXA) += \
+	pxa300-raumfeld-connector.dtb \
+	pxa300-raumfeld-controller.dtb \
+	pxa300-raumfeld-speaker-l.dtb \
+	pxa300-raumfeld-speaker-m.dtb \
+	pxa300-raumfeld-speaker-one.dtb \
+	pxa300-raumfeld-speaker-s.dtb
diff --git a/arch/arm/boot/dts/intel/pxa/pxa25x.dtsi b/arch/arm/boot/dts/intel/pxa/pxa25x.dtsi
new file mode 100644
index 0000000000000..5f8300e356adf
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa25x.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Robert Jarzmik <robert.jarzmik@free.fr>
+ */
+#include "pxa2xx.dtsi"
+#include "dt-bindings/clock/pxa-clock.h"
+
+/ {
+	model = "Marvell PXA25x family SoC";
+	compatible = "marvell,pxa250";
+
+	clocks {
+	       /*
+		* The muxing of external clocks/internal dividers for osc* clock
+		* sources has been hidden under the carpet by now.
+		*/
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clks: pxa2xx_clks@41300004 {
+			compatible = "marvell,pxa250-core-clocks";
+			#clock-cells = <1>;
+			status = "okay";
+		};
+
+		/* timer oscillator */
+		clktimer: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency  = <3686400>;
+			clock-output-names = "ostimer";
+		};
+	};
+
+	pxabus {
+		pdma: dma-controller@40000000 {
+			compatible = "marvell,pdma-1.0";
+			reg = <0x40000000 0x10000>;
+			interrupts = <25>;
+			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <16>;
+			dma-channels = <16>;
+			#dma-requests = <40>;
+			dma-requests = <40>;
+			status = "okay";
+		};
+
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <32>;
+		};
+
+		pinctrl: pinctrl@40e00000 {
+			reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4
+			       0x40f00020 0x10>;
+			compatible = "marvell,pxa25x-pinctrl";
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "intel,pxa25x-gpio";
+			gpio-ranges = <&pinctrl 0 0 84>;
+			clocks = <&clks CLK_NONE>;
+		};
+
+		pwm0: pwm@40b00000 {
+			compatible = "marvell,pxa250-pwm";
+			reg = <0x40b00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+		};
+
+		pwm1: pwm@40b00010 {
+			compatible = "marvell,pxa250-pwm";
+			reg = <0x40b00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+		};
+
+		rtc@40900000 {
+			clocks = <&clks CLK_OSC32k768>;
+		};
+	};
+
+	timer@40a00000 {
+		compatible = "marvell,pxa-timer";
+		reg = <0x40a00000 0x20>;
+		interrupts = <26>;
+		clocks = <&clktimer>;
+		status = "okay";
+	};
+
+	pxa250_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp-99532800 {
+			opp-hz = /bits/ 64 <99532800>;
+			opp-microvolt = <1000000 950000 1650000>;
+			clock-latency-ns = <20>;
+		};
+		opp-199065600 {
+			opp-hz = /bits/ 64 <199065600>;
+			opp-microvolt = <1000000 950000 1650000>;
+			clock-latency-ns = <20>;
+		};
+		opp-298598400 {
+			opp-hz = /bits/ 64 <298598400>;
+			opp-microvolt = <1100000 1045000 1650000>;
+			clock-latency-ns = <20>;
+		};
+		opp-398131200 {
+			opp-hz = /bits/ 64 <398131200>;
+			opp-microvolt = <1300000 1235000 1650000>;
+			clock-latency-ns = <20>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa27x.dtsi b/arch/arm/boot/dts/intel/pxa/pxa27x.dtsi
new file mode 100644
index 0000000000000..a2cbfb3be6090
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa27x.dtsi
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0
+/* The pxa3xx skeleton simply augments the 2xx version */
+#include "pxa2xx.dtsi"
+#include "dt-bindings/clock/pxa-clock.h"
+
+/ {
+	model = "Marvell PXA27x familiy SoC";
+	compatible = "marvell,pxa27x";
+
+	pxabus {
+		pdma: dma-controller@40000000 {
+			compatible = "marvell,pdma-1.0";
+			reg = <0x40000000 0x10000>;
+			interrupts = <25>;
+			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <32>;
+			dma-channels = <32>;
+			#dma-requests = <75>;
+			dma-requests = <75>;
+			status = "okay";
+		};
+
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <34>;
+		};
+
+		pinctrl: pinctrl@40e00000 {
+			reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4
+			       0x40f00020 0x10>;
+			compatible = "marvell,pxa27x-pinctrl";
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "intel,pxa27x-gpio";
+			gpio-ranges = <&pinctrl 0 0 128>;
+			clocks = <&clks CLK_NONE>;
+		};
+
+		usb0: usb@4c000000 {
+			compatible = "marvell,pxa-ohci";
+			reg = <0x4c000000 0x10000>;
+			interrupts = <3>;
+			clocks = <&clks CLK_USBHOST>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@40b00000 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40b00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+		};
+
+		pwm1: pwm@40b00010 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40b00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+		};
+
+		pwm2: pwm@40c00000 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40c00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+		};
+
+		pwm3: pwm@40c00010 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40c00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+		};
+
+		pwri2c: i2c@40f00180 {
+			compatible = "mrvl,pxa-i2c";
+			reg = <0x40f00180 0x24>;
+			interrupts = <6>;
+			clocks = <&clks CLK_PWRI2C>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pxa27x_udc: udc@40600000 {
+			compatible = "marvell,pxa270-udc";
+			reg = <0x40600000 0x10000>;
+			interrupts = <11>;
+			clocks = <&clks CLK_USB>;
+			status = "disabled";
+		};
+
+		keypad: keypad@41500000 {
+			compatible = "marvell,pxa27x-keypad";
+			reg = <0x41500000 0x4c>;
+			interrupts = <4>;
+			clocks = <&clks CLK_KEYPAD>;
+			status = "disabled";
+		};
+
+		pxa_camera: imaging@50000000 {
+			compatible = "marvell,pxa270-qci";
+			reg = <0x50000000 0x1000>;
+			interrupts = <33>;
+			dmas = <&pdma 68 0	/* Y channel */
+				&pdma 69 0	/* U channel */
+				&pdma 70 0>;	/* V channel */
+			dma-names = "CI_Y", "CI_U", "CI_V";
+
+			clocks = <&clks CLK_CAMERA>;
+			clock-names = "ciclk";
+			clock-frequency = <5000000>;
+			clock-output-names = "qci_mclk";
+
+			status = "disabled";
+		};
+
+		rtc@40900000 {
+			clocks = <&clks CLK_OSC32k768>;
+		};
+	};
+
+	clocks {
+	       /*
+		* The muxing of external clocks/internal dividers for osc* clock
+		* sources has been hidden under the carpet by now.
+		*/
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clks: pxa2xx_clks@41300004 {
+			compatible = "marvell,pxa270-clocks";
+			#clock-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	timer@40a00000 {
+		compatible = "marvell,pxa-timer";
+		reg = <0x40a00000 0x20>;
+		interrupts = <26>;
+		clocks = <&clks CLK_OSTIMER>;
+		status = "okay";
+	};
+
+	pxa270_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp-104000000 {
+			opp-hz = /bits/ 64 <104000000>;
+			opp-microvolt = <900000 900000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp-156000000 {
+			opp-hz = /bits/ 64 <156000000>;
+			opp-microvolt = <1000000 1000000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp-208000000 {
+			opp-hz = /bits/ 64 <208000000>;
+			opp-microvolt = <1180000 1180000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <1250000 1250000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp-416000000 {
+			opp-hz = /bits/ 64 <416000000>;
+			opp-microvolt = <1350000 1350000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp-520000000 {
+			opp-hz = /bits/ 64 <520000000>;
+			opp-microvolt = <1450000 1450000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp-624000000 {
+			opp-hz = /bits/ 64 <624000000>;
+			opp-microvolt = <1550000 1550000 1705000>;
+			clock-latency-ns = <20>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa2xx.dtsi b/arch/arm/boot/dts/intel/pxa/pxa2xx.dtsi
new file mode 100644
index 0000000000000..84154c43fe654
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa2xx.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "dt-bindings/clock/pxa-clock.h"
+
+#define PMGROUP(pin) #pin
+#define PMMUX(func, pin, af)			\
+	mux- ## func {				\
+		groups = PMGROUP(P ## pin);	\
+		function = #af;			\
+	}
+#define PMMUX_LPM_LOW(func, pin, af)		\
+	mux- ## func {				\
+		groups = PMGROUP(P ## pin);	\
+		function = #af;			\
+		low-power-disable;		\
+	}
+#define PMMUX_LPM_HIGH(func, pin, af)		\
+	mux- ## func {				\
+		groups = PMGROUP(P ## pin);	\
+		function = #af;			\
+		low-power-enable;		\
+	}
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Marvell PXA2xx family SoC";
+	compatible = "marvell,pxa2xx";
+	interrupt-parent = <&pxairq>;
+
+	aliases {
+		serial0 = &ffuart;
+		serial1 = &btuart;
+		serial2 = &stuart;
+		serial3 = &hwuart;
+		i2c0 = &pwri2c;
+		i2c1 = &pxai2c1;
+	};
+
+	cpus {
+		cpu {
+			compatible = "marvell,xscale";
+			device_type = "cpu";
+		};
+	};
+
+	pxabus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pxairq: interrupt-controller@40d00000 {
+			#interrupt-cells = <1>;
+			compatible = "marvell,pxa-intc";
+			interrupt-controller;
+			interrupt-parent;
+			marvell,intc-nr-irqs = <32>;
+			reg = <0x40d00000 0xd0>;
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "mrvl,pxa-gpio";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			reg = <0x40e00000 0x10000>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupts = <8>, <9>, <10>;
+			interrupt-names = "gpio0", "gpio1", "gpio_mux";
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+			ranges;
+
+			gcb0: gpio@40e00000 {
+				reg = <0x40e00000 0x4>;
+			};
+
+			gcb1: gpio@40e00004 {
+				reg = <0x40e00004 0x4>;
+			};
+
+			gcb2: gpio@40e00008 {
+				reg = <0x40e00008 0x4>;
+			};
+			gcb3: gpio@40e0000c {
+				reg = <0x40e0000c 0x4>;
+			};
+		};
+
+		ffuart: serial@40100000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40100000 0x30>;
+			interrupts = <22>;
+			clocks = <&clks CLK_FFUART>;
+			status = "disabled";
+		};
+
+		btuart: serial@40200000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40200000 0x30>;
+			interrupts = <21>;
+			clocks = <&clks CLK_BTUART>;
+			status = "disabled";
+		};
+
+		stuart: serial@40700000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40700000 0x30>;
+			interrupts = <20>;
+			clocks = <&clks CLK_STUART>;
+			status = "disabled";
+		};
+
+		hwuart: serial@41600000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x41600000 0x30>;
+			interrupts = <7>;
+			status = "disabled";
+		};
+
+		pxai2c1: i2c@40301680 {
+			compatible = "mrvl,pxa-i2c";
+			reg = <0x40301680 0x30>;
+			interrupts = <18>;
+			clocks = <&clks CLK_I2C>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@41100000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x41100000 0x1000>;
+			interrupts = <23>;
+			clocks = <&clks CLK_MMC>;
+			dmas = <&pdma 21 3
+				&pdma 22 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		rtc@40900000 {
+			compatible = "marvell,pxa-rtc";
+			reg = <0x40900000 0x3c>;
+			interrupts = <30 31>;
+		};
+
+		lcdc: lcd-controller@40500000 {
+			compatible = "marvell,pxa2xx-lcdc";
+			reg = <0x44000000 0x10000>;
+			interrupts = <17>;
+			clocks = <&clks CLK_LCD>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-common.dtsi
new file mode 100644
index 0000000000000..147c99191dc29
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-common.dtsi
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "pxa3xx.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* Will be overridden by bootloader */
+	hw-revision = <0>;
+
+	chosen {
+		bootargs = "root=ubi0:RootFS rootfstype=ubifs rw ubi.mtd=3";
+		stdout-path = &ffuart;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0xa0000000 0x8000000>;	/* 128 MB */
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3-fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8-fixed-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_va_5v0: regulator-va-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "va-5v0-fixed-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 124 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	ssp_dai0: ssp-dai0 {
+		compatible = "mrvl,pxa-ssp-dai";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssp0_dai_pins>;
+		port = <&ssp1>;
+		#sound-dai-cells = <0>;
+		dmas = <&pdma 13 3
+			&pdma 14 3>;
+		dma-names = "rx", "tx";
+		clock-names = "extclk";
+	};
+
+	ssp_dai1: ssp-dai1 {
+		compatible = "mrvl,pxa-ssp-dai";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssp1_dai_pins>;
+		port = <&ssp2>;
+		#sound-dai-cells = <0>;
+		dmas = <&pdma 15 3
+			&pdma 16 3>;
+		dma-names = "rx", "tx";
+		clock-names = "extclk";
+	};
+
+	spi: spi {
+		compatible = "spi-gpio";
+		#address-cells = <0x1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_pins>;
+		gpio-sck = <&gpio 95 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio 98 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio 97 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <
+			&gpio 34 GPIO_ACTIVE_HIGH
+			&gpio 125 GPIO_ACTIVE_HIGH
+			&gpio 96 GPIO_ACTIVE_HIGH
+		>;
+		num-chipselects = <3>;
+
+		dac: dac@2 {
+			compatible = "ti,dac7512";
+			reg = <2>;
+			spi-max-frequency = <1000000>;
+			vcc-supply = <&reg_3v3>;
+		};
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		on-off {
+			label = "on_off button";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F6>;
+		};
+
+		rescue-boot {
+			label = "rescue boot button";
+			gpios = <&gpio 115 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_F4>;
+		};
+
+		setup {
+			label = "setup";
+			gpios = <&gpio 119 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_F3>;
+		};
+	};
+
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		gpios = <
+			&gpio 19 GPIO_ACTIVE_LOW
+			&gpio 20 GPIO_ACTIVE_HIGH
+		>;
+		linux,axis = <REL_X>;
+		rotary-encoder,relative-axis;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a &led_pins_b>;
+
+		left {
+			label = "raumfeld:1";
+			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+		};
+
+		right {
+			label = "raumfeld:2";
+			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-names = "default";
+		pinctrl-0 = <&poweroff_pins>;
+		gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	mmc0_pwrseq: mmc-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc0_pwrseq_pins>;
+		reset-gpios = <
+			&gpio 113 GPIO_ACTIVE_LOW	/* W2W_RESET	*/
+			&gpio 114 GPIO_ACTIVE_LOW	/* W2W_PDN	*/
+		>;
+	};
+
+	ethernet: ethernet@10000000 {
+		compatible = "smsc,lan9115";
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc_pins &smsc_bus_pins>;
+		reg = <0x10000000 0x100000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio>;
+		interrupts = <40 IRQ_TYPE_EDGE_FALLING>;
+		vdd33a-supply = <&reg_3v3>;
+		vddvario-supply = <&reg_1v8>;
+		reset-gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+		smsc,irq-push-pull;
+	};
+};
+
+&ffuart {
+	status = "okay";
+};
+
+&pwri2c {
+	status = "okay";
+
+	max8660: regulator@34 {
+		compatible = "maxim,max8660";
+		reg = <0x34>;
+
+		regulators {
+			regulator-v3 {
+				regulator-compatible = "V3(DCDC)";
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			regulator-v4 {
+				regulator-compatible = "V4(DCDC)";
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			regulator-v5 {
+				regulator-compatible = "V5(LDO)";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <2000000>;
+			};
+
+			reg_vcc_sdio: regulator-v6 {
+				regulator-compatible = "V6(LDO)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			regulator-v7 {
+				regulator-compatible = "V7(LDO)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&pxai2c1 {
+	status = "okay";
+	mrvl,i2c-fast-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pxai2c1_pins>;
+};
+
+&ssp1 {
+	status = "okay";
+};
+
+&ssp2 {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		nand-rb = <0>;
+		nand-ecc-mode = "hw";
+		marvell,nand-keep-config;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Bootloader";
+				reg = <0x0000000 0xa0000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "BootloaderEnvironment";
+				reg = <0x0a0000 0x20000>;
+			};
+
+			partition@c0000 {
+				label = "BootloaderSplashScreen";
+				reg = <0x0c0000 0x60000>;
+			};
+
+			partition@120000 {
+				label = "UBI";
+				reg = <0x120000 0x7ee0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+	marvell,enable-port1;
+	marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pxa3xx_ohci_pins>;
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	pxa-mmc,detect-delay-ms = <200>;
+	vmmc-supply = <&reg_vcc_sdio>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	non-removable;
+	bus-width = <4>;
+};
+
+&pinctrl {
+	poweroff_pins: poweroff-pins {
+		pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	led_pins_a: led-pins-a {
+		pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	led_pins_b: led-pins-b {
+		pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
+	};
+
+	pxai2c1_pins: pxai2c1-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(21) MFP_AF1	/* I2C_SCL	*/
+			MFP_PIN_PXA300(22) MFP_AF1	/* I2C_SDA	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+	};
+
+	gpio_keys_pins: gpio-keys-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(14) MFP_AF0	/* on-off	*/
+			MFP_PIN_PXA300(115) MFP_AF0	/* rescue boot	*/
+			MFP_PIN_PXA300(119) MFP_AF0	/* setup	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	spi_pins: spi-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(95) MFP_AF0	/* SCK		*/
+			MFP_PIN_PXA300(97) MFP_AF0	/* MOSI		*/
+			MFP_PIN_PXA300(98) MFP_AF0	/* MISO		*/
+			MFP_PIN_PXA300(34) MFP_AF0	/* CS#0		*/
+			MFP_PIN_PXA300(125) MFP_AF0	/* CS#1		*/
+			MFP_PIN_PXA300(96) MFP_AF0	/* CS#2		*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	pxa3xx_ohci_pins: pxa3xx-ohci-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300_2(0) MFP_AF1	/* USBHPEN	*/
+			MFP_PIN_PXA300_2(1) MFP_AF1	/* USBHPWR	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	smsc_pins: smsc-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(39) MFP_AF0	/* RESET	*/
+			MFP_PIN_PXA300(40) MFP_AF0	/* IRQ		*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	smsc_bus_pins: smsc-bus-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(1) MFP_AF1	/* nCS2		*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	mmc0_pins: mmc0-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(3) MFP_AF4	/* MMC1_DAT0	*/
+			MFP_PIN_PXA300(4) MFP_AF4	/* MMC1_DAT1	*/
+			MFP_PIN_PXA300(5) MFP_AF4	/* MMC1_DAT2	*/
+			MFP_PIN_PXA300(6) MFP_AF4	/* MMC1_DAT3	*/
+			MFP_PIN_PXA300(7) MFP_AF4	/* MMC1_CLK	*/
+			MFP_PIN_PXA300(8) MFP_AF4	/* MMC1_CMD	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
+	};
+
+	mmc0_pwrseq_pins: mmc0-pwrseq-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(113) MFP_AF0	/* W2W_RESET	*/
+			MFP_PIN_PXA300(114) MFP_AF0	/* W2W_PDN	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	ssp0_dai_pins: ssp0-dai-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(85) MFP_AF1	/* SSP1_SCLK	*/
+			MFP_PIN_PXA300(86) MFP_AF1	/* SSP1_FRM	*/
+			MFP_PIN_PXA300(87) MFP_AF1	/* SSP1_TXD	*/
+			MFP_PIN_PXA300(88) MFP_AF1	/* SSP1_RXD	*/
+			MFP_PIN_PXA300(89) MFP_AF1	/* SSP1_EXTCLK	*/
+			MFP_PIN_PXA300(90) MFP_AF1	/* SSP1_SYSCLK	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	ssp1_dai_pins: ssp1-dai-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(25) MFP_AF2	/* SSP2_SCLK	*/
+			MFP_PIN_PXA300(26) MFP_AF2	/* SSP2_FRM	*/
+			MFP_PIN_PXA300(27) MFP_AF2	/* SSP2_TXD	*/
+			MFP_PIN_PXA300(29) MFP_AF2	/* SSP2_EXTCLK	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-connector.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-connector.dts
new file mode 100644
index 0000000000000..3e9445419e39b
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-connector.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+	model = "Raumfeld Connector (PXA3xx)";
+	compatible = "raumfeld,raumfeld-connector-pxa303", "marvell,pxa300";
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Raumfeld Connector";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_analog>;
+			frame-master = <&dailink_master_analog>;
+			mclk-fs = <256>;
+
+			dailink_master_analog: cpu {
+				sound-dai = <&ssp_dai0>;
+			};
+
+			codec {
+				sound-dai = <&cs4270>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_digital>;
+			frame-master = <&dailink_master_digital>;
+			mclk-fs = <256>;
+
+			dailink_master_digital: cpu {
+				sound-dai = <&ssp_dai1>;
+			};
+
+			codec {
+				sound-dai = <&ak4104>;
+			};
+		};
+	};
+};
+
+&ssp1 {
+	status = "okay";
+};
+
+&ssp2 {
+	status = "okay";
+};
+
+&spi {
+	ak4104: optical-transmitter@0 {
+		compatible = "asahi-kasei,ak4104";
+		reg = <0>;
+		vdd-supply = <&reg_3v3>;
+		spi-max-frequency = <5000000>;
+		reset-gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&rotary {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-controller.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-controller.dts
new file mode 100644
index 0000000000000..12b15945ac6d1
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-controller.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+
+/ {
+	model = "Raumfeld Controller (PXA3xx)";
+	compatible = "raumfeld,raumfeld-controller-pxa303", "marvell,pxa300";
+
+	reg_vbatt: regulator-vbatt {
+		compatible = "regulator-fixed";
+		regulator-name = "vbatt-fixed-supply";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+	};
+
+	lcd_supply: regulator-va-tft {
+		compatible = "regulator-fixed";
+		regulator-name = "va-tft-fixed-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&w1_pins>;
+		gpios = <
+			&gpio 126 GPIO_OPEN_DRAIN	/* W1 I/O	*/
+			&gpio 105 GPIO_ACTIVE_HIGH	/* pullup	*/
+		>;
+
+		w1_ds2760: slave-ds2760 {
+			compatible = "maxim,ds2760";
+			power-supplies = <&charger>;
+		};
+	};
+
+	charger: charger {
+		pinctrl-names = "default";
+		pinctrl-0 = <&charger_pins>;
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio 101 GPIO_ACTIVE_LOW>;
+	};
+
+	/*
+	 * One of the following two will be set to "okay" by the bootloader,
+	 * depending on the hardware revision.
+	 */
+	backlight-controller-pwm {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pins>;
+		pwms = <&pwm0 10000>;
+		power-supply = <&reg_vbatt>;
+		status = "disabled";
+
+		brightness-levels = <
+			 0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <100>;
+	};
+
+	backlight-controller {
+		compatible = "lltc,lt3593";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt3593_pins>;
+		lltc,ctrl-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		led {
+			label = "backlight";
+			default-state = "on";
+		};
+	};
+};
+
+&reg_va_5v0 {
+	status = "disabled";
+};
+
+&ethernet {
+	status = "disabled";
+};
+
+&leds {
+	status = "disabled";
+};
+
+&dac {
+	status = "disabled";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&keys {
+	pinctrl-0 = <&gpio_keys_pins &dock_detect_pins>;
+	dock-detect {
+		label = "dock detect";
+		gpios = <&gpio 116 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_F5>;
+	};
+};
+
+&spi {
+	accelerometer@1 {
+		compatible = "st,lis302dl-spi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lis302_pins>;
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio>;
+		interrupts = <104 IRQ_TYPE_EDGE_FALLING>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+	};
+};
+
+&lcdc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdc_pins>;
+	lcd-supply = <&lcd_supply>;
+
+	port {
+		lcdc_out: endpoint {
+			remote-endpoint = <&panel_in>;
+			bus-width = <16>;
+		};
+	};
+
+	panel {
+		compatible = "sharp,lq043t3dx0-panel";
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing {
+				clock-frequency = <9009000>;
+				pixelclk-active = <0>;	/* negative edge */
+				hactive = <480>;
+				vactive = <272>;
+				hsync-len = <41>;
+				hback-porch = <2>;
+				hfront-porch = <1>;
+				vsync-len = <10>;
+				vback-porch = <3>;
+				vfront-porch = <1>;
+			};
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdc_out>;
+			};
+		};
+	};
+};
+
+&gcu {
+	status = "okay";
+};
+
+&pxai2c1 {
+	touchscreen@a {
+		compatible = "eeti,exc3000-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&eeti_ts_pins>;
+		reg = <0xa>;
+		interrupt-parent = <&gpio>;
+		interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+		attn-gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
+		touchscreen-inverted-y;
+	};
+};
+
+&pinctrl {
+	lis302_pins: lis302-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(104) MFP_AF0	/* IRQ	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	eeti_ts_pins: eeti-ts-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(32) MFP_AF0	/* IRQ */
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	lt3593_pins: lt3593-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(17) MFP_AF0	/* Backlight	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	pwm0_pins: pwm0-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(17) MFP_AF1	/* PWM	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	w1_pins: w1-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(126) MFP_AF0	/* PWM	*/
+			MFP_PIN_PXA300(105) MFP_AF0	/* PWM	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	charger_pins: charger_pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(31) MFP_AF0	/* PEN2	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+		pinctrl-single,bias-pullup = MPF_PULL_UP;
+	};
+
+	dock_detect_pins: dock_detect_pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(116) MFP_AF0	/* DOCK_DETECT	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+		pinctrl-single,bias-pullup = MPF_PULL_UP;
+	};
+
+	lcdc_pins: lcdc-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(54) MFP_AF1	/* LDD_0	*/
+			MFP_PIN_PXA300(55) MFP_AF1	/* LDD_1	*/
+			MFP_PIN_PXA300(56) MFP_AF1	/* LDD_2	*/
+			MFP_PIN_PXA300(57) MFP_AF1	/* LDD_3	*/
+			MFP_PIN_PXA300(58) MFP_AF1	/* LDD_4	*/
+			MFP_PIN_PXA300(59) MFP_AF1	/* LDD_5	*/
+			MFP_PIN_PXA300(60) MFP_AF1	/* LDD_6	*/
+			MFP_PIN_PXA300(61) MFP_AF1	/* LDD_7	*/
+			MFP_PIN_PXA300(62) MFP_AF1	/* LDD_8	*/
+			MFP_PIN_PXA300(63) MFP_AF1	/* LDD_9	*/
+			MFP_PIN_PXA300(64) MFP_AF1	/* LDD_10	*/
+			MFP_PIN_PXA300(65) MFP_AF1	/* LDD_11	*/
+			MFP_PIN_PXA300(66) MFP_AF1	/* LDD_12	*/
+			MFP_PIN_PXA300(67) MFP_AF1	/* LDD_13	*/
+			MFP_PIN_PXA300(68) MFP_AF1	/* LDD_14	*/
+			MFP_PIN_PXA300(69) MFP_AF1	/* LDD_15	*/
+			MFP_PIN_PXA300(70) MFP_AF1	/* LDD_16	*/
+			MFP_PIN_PXA300(71) MFP_AF1	/* LDD_17	*/
+			MFP_PIN_PXA300(72) MFP_AF1	/* LCD_FCLK	*/
+			MFP_PIN_PXA300(73) MFP_AF1	/* LCD_LCLK	*/
+			MFP_PIN_PXA300(74) MFP_AF1	/* LCD_PCLK	*/
+			MFP_PIN_PXA300(75) MFP_AF1	/* LCD_BIAS	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-l.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-l.dts
new file mode 100644
index 0000000000000..5a0f7f17856f3
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-l.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+	model = "Raumfeld Speaker L (PXA3xx)";
+	compatible = "raumfeld,raumfeld-speaker-l-pxa303", "marvell,pxa300";
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-m.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-m.dts
new file mode 100644
index 0000000000000..fa10d896282c4
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-m.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+	model = "Raumfeld Speaker M (PXA3xx)";
+	compatible = "raumfeld,raumfeld-speaker-m-pxa303", "marvell,pxa300";
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-one.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-one.dts
new file mode 100644
index 0000000000000..a70560a8ea920
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-one.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+
+/ {
+	model = "Raumfeld Speaker One (PXA3xx)";
+	compatible = "raumfeld,raumfeld-speaker-one-pxa303", "marvell,pxa300";
+
+	wm8782: wm8782 {
+		compatible = "wm8782";
+		#sound-dai-cells = <0>;
+		Vdd-supply = <&reg_3v3>;
+		Vdda-supply = <&reg_va_5v0>;
+	};
+
+	xo_11mhz: oscillator-11mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+		clock-accuracy = <100>;
+	};
+
+	xo_audio: clock-gate {
+		compatible = "gpio-gate-clock";
+		pinctrlnames = "default";
+		pinctrl-0 = <&xo_audio_pins>;
+		clocks = <&xo_11mhz>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_va_30v0: regulator-va-30v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "va-30v0-fixed-supply";
+		regulator-min-microvolt = <30000000>;
+		regulator-max-microvolt = <30000000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Raumfeld Speaker";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_analog_out>;
+			frame-master = <&dailink_master_analog_out>;
+			mclk-fs = <256>;
+
+			dailink_master_analog_out: cpu {
+				sound-dai = <&ssp_dai0>;
+			};
+
+			codec {
+				sound-dai = <&sta320>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_analog_in>;
+			frame-master = <&dailink_master_analog_in>;
+			mclk-fs = <256>;
+
+			dailink_master_analog_in: cpu {
+				sound-dai = <&ssp_dai0>;
+			};
+
+			codec {
+				sound-dai = <&wm8782>;
+			};
+		};
+	};
+};
+
+&ssp_dai0 {
+	clocks = <&xo_audio>;
+};
+
+&spi {
+	dac@2 {
+		compatible = "ti,dac7512";
+		reg = <2>;
+		spi-max-frequency = <1000000>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&rotary {
+	status = "okay";
+};
+
+&pxai2c1 {
+	sta320: codec@1a {
+		compatible = "st,sta32x";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sta320_pins>;
+		clocks = <&xo_audio>;
+		clock-names = "xti";
+		reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>;
+		Vdda-supply = <&reg_3v3>;
+		Vdd3-supply = <&reg_3v3>;
+		Vcc-supply = <&reg_va_30v0>;
+		#sound-dai-cells = <0>;
+		st,thermal-warning-adjustment;
+		st,thermal-warning-recovery;
+		st,fault-detect-recovery;
+		st,drop-compensation-ns = <80>;
+		st,max-power-use-mpcc;
+		st,invalid-input-detect-mute;
+		/* 2 (half-bridge) and 1 (full-bridge) on-board power */
+		st,output-conf = /bits/ 8 <0x1>;
+		st,ch1-output-mapping = /bits/ 8 <0>;
+		st,ch2-output-mapping = /bits/ 8 <1>;
+		st,ch3-output-mapping = /bits/ 8 <2>;
+		st,needs_esd_watchdog;
+	};
+};
+
+&pinctrl {
+	xo_audio_pins: xo-audio-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(111) MFP_AF0	/* ENABLE */
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	sta320_pins: sta320-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(120) MFP_AF0	/* CODEC_RESET	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-s.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-s.dts
new file mode 100644
index 0000000000000..36e20cbf8704b
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-s.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+	model = "Raumfeld Speaker S (PXA3xx)";
+	compatible = "raumfeld,raumfeld-speaker-s-pxa303", "marvell,pxa300";
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-tuneable-clock.dtsi b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-tuneable-clock.dtsi
new file mode 100644
index 0000000000000..561483b93989d
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-tuneable-clock.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/maxim,max9485.h>
+
+/ {
+	xo_27mhz: oscillator-27mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+		clock-accuracy = <100>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Raumfeld Speaker";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_analog>;
+			frame-master = <&dailink_master_analog>;
+			mclk-fs = <256>;
+
+			dailink_master_analog: cpu {
+				sound-dai = <&ssp_dai0>;
+			};
+
+			codec {
+				sound-dai = <&cs4270>;
+			};
+		};
+	};
+};
+
+&ssp_dai0 {
+	clocks = <&max9485 MAX9485_CLKOUT1>;
+};
+
+&ssp_dai1 {
+	clocks = <&max9485 MAX9485_CLKOUT1>;
+};
+
+&pxai2c1 {
+	cs4270: codec@48 {
+		compatible = "cirrus,cs4270";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cs4270_pins>;
+		reg = <0x48>;
+		va-supply = <&reg_va_5v0>;
+		vd-supply = <&reg_3v3>;
+		vlc-supply = <&reg_3v3>;
+		reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
+	max9485: clock-generator@63 {
+		compatible = "maxim,max9485";
+		pinctrl-names = "default";
+		pinctrl-0 = <&max9485_pins>;
+		reg = <0x63>;
+		vdd-supply = <&reg_3v3>;
+		clock-names = "xclk";
+		clocks = <&xo_27mhz>;
+		reset-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>;
+		#clock-cells = <1>;
+	};
+};
+
+&pinctrl {
+	cs4270_pins: cs4270-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(120) MFP_AF0	/* RESET */
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	max9485_pins: max9485-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(111) MFP_AF0	/* RESET */
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa3xx.dtsi b/arch/arm/boot/dts/intel/pxa/pxa3xx.dtsi
new file mode 100644
index 0000000000000..f9c216f918653
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa3xx.dtsi
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0
+/* The pxa3xx skeleton simply augments the 2xx version */
+#include "pxa2xx.dtsi"
+
+#define MFP_PIN_PXA300(gpio)				\
+	((gpio <= 2) ? (0x00b4 + 4 * gpio) :		\
+	 (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) :	\
+	 (gpio <= 98) ? (0x0400 + 4 * (gpio - 27)) :	\
+	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
+	 0)
+#define MFP_PIN_PXA300_2(gpio)				\
+	((gpio <= 1) ? (0x674 + 4 * gpio) :		\
+	 (gpio <= 6) ? (0x2dc + 4 * gpio) :		\
+	 0)
+
+#define MFP_PIN_PXA310(gpio)				\
+	((gpio <= 2) ? (0x00b4 + 4 * gpio) :		\
+	 (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) :	\
+	 (gpio <= 29) ? (0x0400 + 4 * (gpio - 27)) :	\
+	 (gpio <= 98) ? (0x0418 + 4 * (gpio - 30)) :	\
+	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
+	 (gpio <= 262) ? 0 :				\
+	 (gpio <= 268) ? (0x052c + 4 * (gpio - 263)) :	\
+	 0)
+#define MFP_PIN_PXA310_2(gpio)				\
+	((gpio <= 1) ? (0x674 + 4 * gpio) :		\
+	 (gpio <= 6) ? (0x2dc + 4 * gpio) :		\
+	 (gpio <= 10) ? (0x52c + 4 * gpio) :		\
+	 0)
+
+#define MFP_PIN_PXA320(gpio)				\
+	((gpio <= 4) ? (0x0124 + 4 * gpio) :		\
+	 (gpio <= 9) ? (0x028c + 4 * (gpio - 5)) :	\
+	 (gpio <= 10) ? (0x0458 + 4 * (gpio - 10)) :	\
+	 (gpio <= 26) ? (0x02a0 + 4 * (gpio - 11)) :	\
+	 (gpio <= 48) ? (0x0400 + 4 * (gpio - 27)) :	\
+	 (gpio <= 62) ? (0x045c + 4 * (gpio - 49)) :	\
+	 (gpio <= 73) ? (0x04b4 + 4 * (gpio - 63)) :	\
+	 (gpio <= 98) ? (0x04f0 + 4 * (gpio - 74)) :	\
+	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
+	 0)
+#define MFP_PIN_PXA320_2(gpio)				\
+	((gpio <= 3) ? (0x674 + 4 * gpio) :		\
+	 (gpio <= 5) ? (0x284 + 4 * gpio) :		\
+	 0)
+
+/*
+ * MFP Alternate functions for pins having a gpio.
+ * Example of use: pinctrl-single,pins = < MFP_PIN_PXA310(21) MFP_AF1 >
+ */
+#define MFP_AF0		(0 << 0)
+#define MFP_AF1		(1 << 0)
+#define MFP_AF2		(2 << 0)
+#define MFP_AF3		(3 << 0)
+#define MFP_AF4		(4 << 0)
+#define MFP_AF5		(5 << 0)
+#define MFP_AF6		(6 << 0)
+
+/*
+ * MFP drive strength functions for pins.
+ * Example of use: pinctrl-single,drive-strength = MFP_DS03X;
+ */
+#define MFP_DSMSK	(0x7 << 10)
+#define MFP_DS01X	< (0x0 << 10) MFP_DSMSK >
+#define MFP_DS02X	< (0x1 << 10) MFP_DSMSK >
+#define MFP_DS03X	< (0x2 << 10) MFP_DSMSK >
+#define MFP_DS04X	< (0x3 << 10) MFP_DSMSK >
+#define MFP_DS06X	< (0x4 << 10) MFP_DSMSK >
+#define MFP_DS08X	< (0x5 << 10) MFP_DSMSK >
+#define MFP_DS10X	< (0x6 << 10) MFP_DSMSK >
+#define MFP_DS13X	< (0x7 << 10) MFP_DSMSK >
+
+/*
+ * MFP bias pull mode for pins.
+ * Example of use: pinctrl-single,bias-pullup = MPF_PULL_UP;
+ */
+#define MPF_PULL_MSK	(0x7 << 13)
+#define MPF_PULL_DOWN	< (0x5 << 13) (0x5 << 13) 0 MPF_PULL_MSK >
+#define MPF_PULL_UP	< (0x6 << 13) (0x6 << 13) 0 MPF_PULL_MSK >
+
+/*
+ * MFP low power mode for pins.
+ * Example of use:
+ *   pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL);
+ *
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFP_LPM(x)		< (x) MFP_LPM_MSK >
+
+#define MFP_LPM_MSK		0xe1f0
+#define MFP_LPM_INPUT		0x0000
+#define MFP_LPM_DRIVE_LOW	0x2000
+#define MFP_LPM_DRIVE_HIGH	0x4100
+#define MFP_LPM_PULL_LOW	0x2080
+#define MFP_LPM_PULL_HIGH	0x4180
+#define MFP_LPM_FLOAT		0x0080
+
+#define MFP_LPM_EDGE_NONE	0x0000
+#define MFP_LPM_EDGE_RISE	0x0010
+#define MFP_LPM_EDGE_FALL	0x0020
+#define MFP_LPM_EDGE_BOTH	0x0030
+
+/ {
+	model = "Marvell PXA3xx familiy SoC";
+	compatible = "marvell,pxa3xx";
+
+	pxabus {
+		pdma: dma-controller@40000000 {
+			compatible = "marvell,pdma-1.0";
+			reg = <0x40000000 0x10000>;
+			interrupts = <25>;
+			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <32>;
+			dma-channels = <32>;
+			#dma-requests = <100>;
+			dma-requests = <100>;
+			status = "okay";
+		};
+
+		pwri2c: i2c@40f500c0 {
+			compatible = "mrvl,pwri2c";
+			reg = <0x40f500c0 0x30>;
+			interrupts = <6>;
+			clocks = <&clks CLK_PWRI2C>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@43100000 {
+			compatible = "marvell,pxa3xx-nand-controller";
+			reg = <0x43100000 90>;
+			interrupts = <45>;
+			clocks = <&clks CLK_NAND>;
+			clock-names = "core";
+			dmas = <&pdma 97 3>;
+			dma-names = "data";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <56>;
+		};
+
+		pinctrl: pinctrl@40e10000 {
+			compatible = "pinconf-single";
+			reg = <0x40e10000 0xffff>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x7>;
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "intel,pxa3xx-gpio";
+			reg = <0x40e00000 0x10000>;
+			clocks = <&clks CLK_GPIO>;
+			gpio-ranges = <&pinctrl 0 0 128>;
+			interrupt-names = "gpio0", "gpio1", "gpio_mux";
+			interrupts = <8>, <9>, <10>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		mmc0: mmc@41100000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x41100000 0x1000>;
+			interrupts = <23>;
+			clocks = <&clks CLK_MMC1>;
+			dmas = <&pdma 21 3
+				&pdma 22 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		mmc1: mmc@42000000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x42000000 0x1000>;
+			interrupts = <41>;
+			clocks = <&clks CLK_MMC2>;
+			dmas = <&pdma 93 3
+				&pdma 94 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		mmc2: mmc@42500000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x42500000 0x1000>;
+			interrupts = <55>;
+			clocks = <&clks CLK_MMC3>;
+			dmas = <&pdma 46 3
+				&pdma 47 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		usb0: usb@4c000000 {
+			compatible = "marvell,pxa-ohci";
+			reg = <0x4c000000 0x10000>;
+			interrupts = <3>;
+			clocks = <&clks CLK_USBH>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@40b00000 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40b00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@40b00010 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40b00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@40c00000 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40c00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@40c00010 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40c00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+			status = "disabled";
+		};
+
+		ssp1: ssp@41000000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41000000 0x40>;
+			interrupts = <24>;
+			clocks = <&clks CLK_SSP1>;
+			status = "disabled";
+		};
+
+		ssp2: ssp@41700000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41700000 0x40>;
+			interrupts = <16>;
+			clocks = <&clks CLK_SSP2>;
+			status = "disabled";
+		};
+
+		ssp3: ssp@41900000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41900000 0x40>;
+			interrupts = <0>;
+			clocks = <&clks CLK_SSP3>;
+			status = "disabled";
+		};
+
+		ssp4: ssp@41a00000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41a00000 0x40>;
+			interrupts = <13>;
+			clocks = <&clks CLK_SSP4>;
+			status = "disabled";
+		};
+
+		timer@40a00000 {
+			compatible = "marvell,pxa-timer";
+			reg = <0x40a00000 0x20>;
+			interrupts = <26>;
+			clocks = <&clks CLK_OSTIMER>;
+			status = "okay";
+		};
+
+		gcu: display-controller@54000000 {
+			compatible = "marvell,pxa300-gcu";
+			reg = <0x54000000 0x1000>;
+			interrupts = <39>;
+			clocks = <&clks CLK_PXA300_GCU>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+	       /*
+		* The muxing of external clocks/internal dividers for osc* clock
+		* sources has been hidden under the carpet by now.
+		*/
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clks: clocks {
+			compatible = "marvell,pxa300-clocks";
+			#clock-cells = <1>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/Makefile b/arch/arm/boot/dts/intel/socfpga/Makefile
new file mode 100644
index 0000000000000..c467828aeb4b0
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
+	socfpga_arria5_socdk.dtb \
+	socfpga_arria10_chameleonv3.dtb \
+	socfpga_arria10_mercury_pe1.dtb \
+	socfpga_arria10_socdk_nand.dtb \
+	socfpga_arria10_socdk_qspi.dtb \
+	socfpga_arria10_socdk_sdmmc.dtb \
+	socfpga_cyclone5_chameleon96.dtb \
+	socfpga_cyclone5_mcvevk.dtb \
+	socfpga_cyclone5_socdk.dtb \
+	socfpga_cyclone5_de0_nano_soc.dtb \
+	socfpga_cyclone5_sockit.dtb \
+	socfpga_cyclone5_socrates.dtb \
+	socfpga_cyclone5_sodia.dtb \
+	socfpga_cyclone5_vining_fpga.dtb \
+	socfpga_vt.dtb
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
new file mode 100644
index 0000000000000..4c1d140f40f87
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
@@ -0,0 +1,984 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera <www.altera.com>
+ */
+
+#include <dt-bindings/reset/altr,rst-mgr.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		timer0 = &timer0;
+		timer1 = &timer1;
+		timer2 = &timer2;
+		timer3 = &timer3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "altr,socfpga-smp";
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	pmu: pmu@ff111000 {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 176 4>, <0 177 4>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+		reg = <0xff111000 0x1000>,
+		      <0xff113000 0x1000>;
+	};
+
+	intc: interrupt-controller@fffed000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xfffed000 0x1000>,
+		      <0xfffec100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma: pdma@ffe01000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xffe01000 0x1000>;
+				interrupts = <0 104 4>,
+					     <0 105 4>,
+					     <0 106 4>,
+					     <0 107 4>,
+					     <0 108 4>,
+					     <0 109 4>,
+					     <0 110 4>,
+					     <0 111 4>;
+				#dma-cells = <1>;
+				clocks = <&l4_main_clk>;
+				clock-names = "apb_pclk";
+				resets = <&rst DMA_RESET>;
+				reset-names = "dma";
+			};
+		};
+
+		base_fpga_region {
+			compatible = "fpga-region";
+			fpga-mgr = <&fpgamgr0>;
+
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+		};
+
+		can0: can@ffc00000 {
+			compatible = "bosch,d_can";
+			reg = <0xffc00000 0x1000>;
+			interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+			clocks = <&can0_clk>;
+			resets = <&rst CAN0_RESET>;
+			status = "disabled";
+		};
+
+		can1: can@ffc01000 {
+			compatible = "bosch,d_can";
+			reg = <0xffc01000 0x1000>;
+			interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
+			clocks = <&can1_clk>;
+			resets = <&rst CAN1_RESET>;
+			status = "disabled";
+		};
+
+		clkmgr@ffd04000 {
+				compatible = "altr,clk-mgr";
+				reg = <0xffd04000 0x1000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					osc1: osc1 {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					osc2: osc2 {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					f2s_periph_ref_clk: f2s_periph_ref_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					f2s_sdram_ref_clk: f2s_sdram_ref_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					main_pll: main_pll@40 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>;
+						reg = <0x40>;
+
+						mpuclk: mpuclk@48 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0xe0 0 9>;
+							reg = <0x48>;
+						};
+
+						mainclk: mainclk@4c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0xe4 0 9>;
+							reg = <0x4C>;
+						};
+
+						dbg_base_clk: dbg_base_clk@50 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>, <&osc1>;
+							div-reg = <0xe8 0 9>;
+							reg = <0x50>;
+						};
+
+						main_qspi_clk: main_qspi_clk@54 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x54>;
+						};
+
+						main_nand_sdmmc_clk: main_nand_sdmmc_clk@58 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x58>;
+						};
+
+						cfg_h2f_usr0_clk: cfg_h2f_usr0_clk@5c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x5C>;
+						};
+					};
+
+					periph_pll: periph_pll@80 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
+						reg = <0x80>;
+
+						emac0_clk: emac0_clk@88 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x88>;
+						};
+
+						emac1_clk: emac1_clk@8c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x8C>;
+						};
+
+						per_qspi_clk: per_qsi_clk@90 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x90>;
+						};
+
+						per_nand_mmc_clk: per_nand_mmc_clk@94 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x94>;
+						};
+
+						per_base_clk: per_base_clk@98 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x98>;
+						};
+
+						h2f_usr1_clk: h2f_usr1_clk@9c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x9C>;
+						};
+					};
+
+					sdram_pll: sdram_pll@c0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
+						reg = <0xC0>;
+
+						ddr_dqs_clk: ddr_dqs_clk@c8 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xC8>;
+						};
+
+						ddr_2x_dqs_clk: ddr_2x_dqs_clk@cc {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xCC>;
+						};
+
+						ddr_dq_clk: ddr_dq_clk@d0 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xD0>;
+						};
+
+						h2f_usr2_clk: h2f_usr2_clk@d4 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xD4>;
+						};
+					};
+
+					mpu_periph_clk: mpu_periph_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-perip-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <4>;
+					};
+
+					mpu_l2_ram_clk: mpu_l2_ram_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-perip-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <2>;
+					};
+
+					l4_main_clk: l4_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						clk-gate = <0x60 0>;
+					};
+
+					l3_main_clk: l3_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-perip-clk";
+						clocks = <&mainclk>;
+						fixed-divider = <1>;
+					};
+
+					l3_mp_clk: l3_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						div-reg = <0x64 0 2>;
+						clk-gate = <0x60 1>;
+					};
+
+					l3_sp_clk: l3_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&l3_mp_clk>;
+						div-reg = <0x64 2 2>;
+					};
+
+					l4_mp_clk: l4_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 4 3>;
+						clk-gate = <0x60 2>;
+					};
+
+					l4_sp_clk: l4_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 7 3>;
+						clk-gate = <0x60 3>;
+					};
+
+					dbg_at_clk: dbg_at_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x68 0 2>;
+						clk-gate = <0x60 4>;
+					};
+
+					dbg_clk: dbg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_at_clk>;
+						div-reg = <0x68 2 2>;
+						clk-gate = <0x60 5>;
+					};
+
+					dbg_trace_clk: dbg_trace_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x6C 0 3>;
+						clk-gate = <0x60 6>;
+					};
+
+					dbg_timer_clk: dbg_timer_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						clk-gate = <0x60 7>;
+					};
+
+					cfg_clk: cfg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 8>;
+					};
+
+					h2f_user0_clk: h2f_user0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 9>;
+					};
+
+					emac_0_clk: emac_0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac0_clk>;
+						clk-gate = <0xa0 0>;
+					};
+
+					emac_1_clk: emac_1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac1_clk>;
+						clk-gate = <0xa0 1>;
+					};
+
+					usb_mp_clk: usb_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 2>;
+						div-reg = <0xa4 0 3>;
+					};
+
+					spi_m_clk: spi_m_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 3>;
+						div-reg = <0xa4 3 3>;
+					};
+
+					can0_clk: can0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 4>;
+						div-reg = <0xa4 6 3>;
+					};
+
+					can1_clk: can1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 5>;
+						div-reg = <0xa4 9 3>;
+					};
+
+					gpio_db_clk: gpio_db_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 6>;
+						div-reg = <0xa8 0 24>;
+					};
+
+					h2f_user1_clk: h2f_user1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&h2f_usr1_clk>;
+						clk-gate = <0xa0 7>;
+					};
+
+					sdmmc_clk: sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 8>;
+					};
+
+					sdmmc_clk_divided: sdmmc_clk_divided {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&sdmmc_clk>;
+						clk-gate = <0xa0 8>;
+						fixed-divider = <4>;
+					};
+
+					nand_x_clk: nand_x_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 9>;
+					};
+
+					nand_ecc_clk: nand_ecc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xa0 9>;
+					};
+
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xa0 10>;
+						fixed-divider = <4>;
+					};
+
+					qspi_clk: qspi_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
+						clk-gate = <0xa0 11>;
+					};
+
+					ddr_dqs_clk_gate: ddr_dqs_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_dqs_clk>;
+						clk-gate = <0xd8 0>;
+					};
+
+					ddr_2x_dqs_clk_gate: ddr_2x_dqs_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_2x_dqs_clk>;
+						clk-gate = <0xd8 1>;
+					};
+
+					ddr_dq_clk_gate: ddr_dq_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_dq_clk>;
+						clk-gate = <0xd8 2>;
+					};
+
+					h2f_user2_clk: h2f_user2_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&h2f_usr2_clk>;
+						clk-gate = <0xd8 3>;
+					};
+
+				};
+		};
+
+		fpga_bridge0: fpga_bridge@ff400000 {
+			compatible = "altr,socfpga-lwhps2fpga-bridge";
+			reg = <0xff400000 0x100000>;
+			resets = <&rst LWHPS2FPGA_RESET>;
+			clocks = <&l4_main_clk>;
+			status = "disabled";
+		};
+
+		fpga_bridge1: fpga_bridge@ff500000 {
+			compatible = "altr,socfpga-hps2fpga-bridge";
+			reg = <0xff500000 0x10000>;
+			resets = <&rst HPS2FPGA_RESET>;
+			clocks = <&l4_main_clk>;
+			status = "disabled";
+		};
+
+		fpga_bridge2: fpga-bridge@ff600000 {
+			compatible = "altr,socfpga-fpga2hps-bridge";
+			reg = <0xff600000 0x100000>;
+			resets = <&rst FPGA2HPS_RESET>;
+			clocks = <&l4_main_clk>;
+			status = "disabled";
+		};
+
+		fpga_bridge3: fpga-bridge@ffc25080 {
+			compatible = "altr,socfpga-fpga2sdram-bridge";
+			reg = <0xffc25080 0x4>;
+			status = "disabled";
+		};
+
+		fpgamgr0: fpgamgr@ff706000 {
+			compatible = "altr,socfpga-fpga-mgr";
+			reg = <0xff706000 0x1000
+			       0xffb90000 0x4>;
+			interrupts = <0 175 4>;
+		};
+
+		socfpga_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <0xf>;
+			snps,rd_osr_lmt = <0xf>;
+			snps,blen = <0 0 0 0 16 0 0>;
+		};
+
+		gmac0: ethernet@ff700000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x60 0>;
+			reg = <0xff700000 0x2000>;
+			interrupts = <0 115 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+			clocks = <&emac_0_clk>;
+			clock-names = "stmmaceth";
+			resets = <&rst EMAC0_RESET>;
+			reset-names = "stmmaceth";
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
+			snps,axi-config = <&socfpga_axi_setup>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff702000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x60 2>;
+			reg = <0xff702000 0x2000>;
+			interrupts = <0 120 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+			clocks = <&emac_1_clk>;
+			clock-names = "stmmaceth";
+			resets = <&rst EMAC1_RESET>;
+			reset-names = "stmmaceth";
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
+			snps,axi-config = <&socfpga_axi_setup>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@ff708000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff708000 0x1000>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 164 4>;
+			};
+		};
+
+		gpio1: gpio@ff709000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff709000 0x1000>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 165 4>;
+			};
+		};
+
+		gpio2: gpio@ff70a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff70a000 0x1000>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO2_RESET>;
+			status = "disabled";
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <27>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 166 4>;
+			};
+		};
+
+		i2c0: i2c@ffc04000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc04000 0x1000>;
+			resets = <&rst I2C0_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 158 0x4>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc05000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc05000 0x1000>;
+			resets = <&rst I2C1_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 159 0x4>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc06000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc06000 0x1000>;
+			resets = <&rst I2C2_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 160 0x4>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc07000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc07000 0x1000>;
+			resets = <&rst I2C3_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 161 0x4>;
+			status = "disabled";
+		};
+
+		eccmgr: eccmgr {
+			compatible = "altr,socfpga-ecc-manager";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			l2-ecc@ffd08140 {
+				compatible = "altr,socfpga-l2-ecc";
+				reg = <0xffd08140 0x4>;
+				interrupts = <0 36 1>, <0 37 1>;
+			};
+
+			ocram-ecc@ffd08144 {
+				compatible = "altr,socfpga-ocram-ecc";
+				reg = <0xffd08144 0x4>;
+				iram = <&ocram>;
+				interrupts = <0 178 1>, <0 179 1>;
+			};
+		};
+
+		L2: cache-controller@fffef000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xfffef000 0x1000>;
+			interrupts = <0 38 0x04>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <1 1 1>;
+			arm,data-latency = <2 1 1>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,shared-override;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+			arm,double-linefill-wrap = <1>;
+			arm,prefetch-drop = <0>;
+			arm,prefetch-offset = <7>;
+		};
+
+		l3regs@ff800000 {
+			compatible = "altr,l3regs", "syscon";
+			reg = <0xff800000 0x1000>;
+		};
+
+		mmc: mmc@ff704000 {
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff704000 0x1000>;
+			interrupts = <0 139 4>;
+			fifo-depth = <0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
+			clock-names = "biu", "ciu";
+			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x108 3>;
+			status = "disabled";
+		};
+
+		nand0: nand@ff900000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xff900000 0x100000>,
+			      <0xffb80000 0x10000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0x0 0x90 0x4>;
+			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>;
+			status = "disabled";
+		};
+
+		ocram: sram@ffff0000 {
+			compatible = "mmio-sram";
+			reg = <0xffff0000 0x10000>;
+		};
+
+		qspi: spi@ff705000 {
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff705000 0x1000>,
+			      <0xffa00000 0x1000>;
+			interrupts = <0 151 4>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+			resets = <&rst QSPI_RESET>;
+			status = "disabled";
+		};
+
+		rst: rstmgr@ffd05000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x1000>;
+			altr,modrst-offset = <0x10>;
+		};
+
+		scu: snoop-control-unit@fffec000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xfffec000 0x100>;
+		};
+
+		sdr: sdr@ffc25000 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xffc25000 0x1000>;
+			resets = <&rst SDR_RESET>;
+		};
+
+		sdramedac {
+			compatible = "altr,sdram-edac";
+			altr,sdr-syscon = <&sdr>;
+			interrupts = <0 39 4>;
+		};
+
+		spi0: spi@fff00000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 154 4>;
+			num-cs = <4>;
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
+			status = "disabled";
+		};
+
+		spi1: spi@fff01000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfff01000 0x1000>;
+			interrupts = <0 155 4>;
+			num-cs = <4>;
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@ffd08000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd08000 0x4000>;
+		};
+
+		/* Local timer */
+		timer@fffec600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xfffec600 0x100>;
+			interrupts = <1 13 0xf01>;
+			clocks = <&mpu_periph_clk>;
+		};
+
+		timer0: timer0@ffc08000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 167 4>;
+			reg = <0xffc08000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+			resets = <&rst SPTIMER0_RESET>;
+			reset-names = "timer";
+		};
+
+		timer1: timer1@ffc09000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 168 4>;
+			reg = <0xffc09000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+			resets = <&rst SPTIMER1_RESET>;
+			reset-names = "timer";
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 169 4>;
+			reg = <0xffd00000 0x1000>;
+			clocks = <&osc1>;
+			clock-names = "timer";
+			resets = <&rst OSC1TIMER0_RESET>;
+			reset-names = "timer";
+		};
+
+		timer3: timer3@ffd01000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 170 4>;
+			reg = <0xffd01000 0x1000>;
+			clocks = <&osc1>;
+			clock-names = "timer";
+			resets = <&rst OSC1TIMER1_RESET>;
+			reset-names = "timer";
+		};
+
+		uart0: serial@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x1000>;
+			interrupts = <0 162 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			dmas = <&pdma 28>,
+			       <&pdma 29>;
+			dma-names = "tx", "rx";
+			resets = <&rst UART0_RESET>;
+		};
+
+		uart1: serial@ffc03000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc03000 0x1000>;
+			interrupts = <0 163 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			dmas = <&pdma 30>,
+			       <&pdma 31>;
+			dma-names = "tx", "rx";
+			resets = <&rst UART1_RESET>;
+		};
+
+		usbphy0: usbphy {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0xffff>;
+			interrupts = <0 125 4>;
+			clocks = <&usb_mp_clk>;
+			clock-names = "otg";
+			resets = <&rst USB0_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0xffff>;
+			interrupts = <0 128 4>;
+			clocks = <&usb_mp_clk>;
+			clock-names = "otg";
+			resets = <&rst USB1_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd02000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd02000 0x1000>;
+			interrupts = <0 171 4>;
+			clocks = <&osc1>;
+			resets = <&rst L4WD0_RESET>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd03000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd03000 0x1000>;
+			interrupts = <0 172 4>;
+			clocks = <&osc1>;
+			resets = <&rst L4WD1_RESET>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
new file mode 100644
index 0000000000000..72c55e5187ca8
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
@@ -0,0 +1,920 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "altr,socfpga-a10-smp";
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	pmu: pmu@ff111000 {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 124 4>, <0 125 4>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+		reg = <0xff111000 0x1000>,
+		      <0xff113000 0x1000>;
+	};
+
+	intc: interrupt-controller@ffffd000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xffffd000 0x1000>,
+		      <0xffffc100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma: pdma@ffda1000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xffda1000 0x1000>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 84 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 86 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 89 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 90 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 91 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				clocks = <&l4_main_clk>;
+				clock-names = "apb_pclk";
+				resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
+				reset-names = "dma", "dma-ocp";
+			};
+		};
+
+		base_fpga_region {
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+
+			compatible = "fpga-region";
+			fpga-mgr = <&fpga_mgr>;
+		};
+
+		clkmgr@ffd04000 {
+				compatible = "altr,clk-mgr";
+				reg = <0xffd04000 0x1000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					cb_intosc_ls_clk: cb_intosc_ls_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					f2s_free_clk: f2s_free_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					osc1: osc1 {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					main_pll: main_pll@40 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-pll-clock";
+						clocks = <&osc1>, <&cb_intosc_ls_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x40>;
+
+						main_mpu_base_clk: main_mpu_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0x140 0 11>;
+						};
+
+						main_noc_base_clk: main_noc_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0x144 0 11>;
+						};
+
+						main_emaca_clk: main_emaca_clk@68 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x68>;
+						};
+
+						main_emacb_clk: main_emacb_clk@6c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x6C>;
+						};
+
+						main_emac_ptp_clk: main_emac_ptp_clk@70 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x70>;
+						};
+
+						main_gpio_db_clk: main_gpio_db_clk@74 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x74>;
+						};
+
+						main_sdmmc_clk: main_sdmmc_clk@78 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk"
+;
+							clocks = <&main_pll>;
+							reg = <0x78>;
+						};
+
+						main_s2f_usr0_clk: main_s2f_usr0_clk@7c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x7C>;
+						};
+
+						main_s2f_usr1_clk: main_s2f_usr1_clk@80 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x80>;
+						};
+
+						main_hmc_pll_ref_clk: main_hmc_pll_ref_clk@84 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x84>;
+						};
+
+						main_periph_ref_clk: main_periph_ref_clk@9c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x9C>;
+						};
+					};
+
+					periph_pll: periph_pll@c0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-pll-clock";
+						clocks = <&osc1>, <&cb_intosc_ls_clk>,
+							 <&f2s_free_clk>, <&main_periph_ref_clk>;
+						reg = <0xC0>;
+
+						peri_mpu_base_clk: peri_mpu_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							div-reg = <0x140 16 11>;
+						};
+
+						peri_noc_base_clk: peri_noc_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							div-reg = <0x144 16 11>;
+						};
+
+						peri_emaca_clk: peri_emaca_clk@e8 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xE8>;
+						};
+
+						peri_emacb_clk: peri_emacb_clk@ec {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xEC>;
+						};
+
+						peri_emac_ptp_clk: peri_emac_ptp_clk@f0 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF0>;
+						};
+
+						peri_gpio_db_clk: peri_gpio_db_clk@f4 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF4>;
+						};
+
+						peri_sdmmc_clk: peri_sdmmc_clk@f8 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF8>;
+						};
+
+						peri_s2f_usr0_clk: peri_s2f_usr0_clk@fc {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xFC>;
+						};
+
+						peri_s2f_usr1_clk: peri_s2f_usr1_clk@100 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x100>;
+						};
+
+						peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk@104 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x104>;
+						};
+					};
+
+					mpu_free_clk: mpu_free_clk@60 {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x60>;
+					};
+
+					noc_free_clk: noc_free_clk@64 {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x64>;
+					};
+
+					s2f_user1_free_clk: s2f_user1_free_clk@104 {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x104>;
+					};
+
+					sdmmc_free_clk: sdmmc_free_clk@f8 {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						fixed-divider = <4>;
+						reg = <0xF8>;
+					};
+
+					l4_sys_free_clk: l4_sys_free_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&noc_free_clk>;
+						fixed-divider = <4>;
+					};
+
+					l4_main_clk: l4_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 0 2>;
+						clk-gate = <0x48 1>;
+					};
+
+					l4_mp_clk: l4_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 8 2>;
+						clk-gate = <0x48 2>;
+					};
+
+					l4_sp_clk: l4_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 16 2>;
+						clk-gate = <0x48 3>;
+					};
+
+					mpu_periph_clk: mpu_periph_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&mpu_free_clk>;
+						fixed-divider = <4>;
+						clk-gate = <0x48 0>;
+					};
+
+					sdmmc_clk: sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&sdmmc_free_clk>;
+						clk-gate = <0xC8 5>;
+					};
+
+					qspi_clk: qspi_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_main_clk>;
+						clk-gate = <0xC8 11>;
+					};
+
+					nand_x_clk: nand_x_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_mp_clk>;
+						clk-gate = <0xC8 10>;
+					};
+
+					nand_ecc_clk: nand_ecc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xC8 10>;
+					};
+
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&nand_x_clk>;
+						fixed-divider = <4>;
+						clk-gate = <0xC8 10>;
+					};
+
+					spi_m_clk: spi_m_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_main_clk>;
+						clk-gate = <0xC8 9>;
+					};
+
+					usb_clk: usb_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_mp_clk>;
+						clk-gate = <0xC8 8>;
+					};
+
+					s2f_usr1_clk: s2f_usr1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&peri_s2f_usr1_clk>;
+						clk-gate = <0xC8 6>;
+					};
+				};
+		};
+
+		socfpga_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <0xf>;
+			snps,rd_osr_lmt = <0xf>;
+			snps,blen = <0 0 0 0 16 0 0>;
+		};
+
+		gmac0: ethernet@ff800000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			reg = <0xff800000 0x2000>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
+			snps,axi-config = <&socfpga_axi_setup>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff802000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x48 8>;
+		        reg = <0xff802000 0x2000>;
+			interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
+			snps,axi-config = <&socfpga_axi_setup>;
+			status = "disabled";
+		};
+
+		gmac2: ethernet@ff804000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x4C 16>;
+			reg = <0xff804000 0x2000>;
+			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
+			snps,axi-config = <&socfpga_axi_setup>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@ffc02900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02900 0x100>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@ffc02a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02a00 0x100>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@ffc02b00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02b00 0x100>;
+			resets = <&rst GPIO2_RESET>;
+			status = "disabled";
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <27>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		fpga_mgr: fpga-mgr@ffd03000 {
+			compatible = "altr,socfpga-a10-fpga-mgr";
+			reg = <0xffd03000 0x100
+			       0xffcfe400 0x20>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst FPGAMGR_RESET>;
+			reset-names = "fpgamgr";
+		};
+
+		i2c0: i2c@ffc02200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02200 0x100>;
+			interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C0_RESET>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc02300 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02300 0x100>;
+			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C1_RESET>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc02400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02400 0x100>;
+			interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C2_RESET>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc02500 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02500 0x100>;
+			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C3_RESET>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffc02600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02600 0x100>;
+			interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C4_RESET>;
+			status = "disabled";
+		};
+
+		spi0: spi@ffda4000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x100>;
+			interrupts = <0 101 4>;
+			num-cs = <4>;
+			/*32bit_access;*/
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
+			status = "disabled";
+		};
+
+		spi1: spi@ffda5000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda5000 0x100>;
+			interrupts = <0 102 4>;
+			num-cs = <4>;
+			/*32bit_access;*/
+			tx-dma-channel = <&pdma 16>;
+			rx-dma-channel = <&pdma 17>;
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
+			status = "disabled";
+		};
+
+		sdr: sdr@ffcfb100 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xffcfb100 0x80>;
+		};
+
+		L2: cache-controller@fffff000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xfffff000 0x1000>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,shared-override;
+		};
+
+		mmc: mmc@ff808000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff808000 0x1000>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-depth = <0x400>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+			clock-names = "biu", "ciu";
+			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
+			status = "disabled";
+		};
+
+		nand: nand@ffb90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xffb90000 0x72000>,
+			      <0xffb80000 0x10000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0 99 4>;
+			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>;
+			status = "disabled";
+		};
+
+		ocram: sram@ffe00000 {
+			compatible = "mmio-sram";
+			reg = <0xffe00000 0x40000>;
+		};
+
+		eccmgr: eccmgr {
+			compatible = "altr,socfpga-a10-ecc-manager";
+			altr,sysmgr-syscon = <&sysmgr>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			sdramedac {
+				compatible = "altr,sdram-edac-a10";
+				altr,sdr-syscon = <&sdr>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+					     <49 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			l2-ecc@ffd06010 {
+				compatible = "altr,socfpga-a10-l2-ecc";
+				reg = <0xffd06010 0x4>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+					     <32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ocram-ecc@ff8c3000 {
+				compatible = "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8c3000 0x400>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+					     <33 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-rx-ecc@ff8c0800 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0800 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+					     <36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-tx-ecc@ff8c0c00 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0c00 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+					     <37 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sdmmca-ecc@ff8c2c00 {
+				compatible = "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c2c00 0x400>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+					     <47 IRQ_TYPE_LEVEL_HIGH>,
+					     <16 IRQ_TYPE_LEVEL_HIGH>,
+					     <48 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			dma-ecc@ff8c8000 {
+				compatible = "altr,socfpga-dma-ecc";
+				reg = <0xff8c8000 0x400>;
+				altr,ecc-parent = <&pdma>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+					     <42 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usb0-ecc@ff8c8800 {
+				compatible = "altr,socfpga-usb-ecc";
+				reg = <0xff8c8800 0x400>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+					     <34 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		qspi: spi@ff809000 {
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff809000 0x100>,
+			      <0xffa00000 0x100000>;
+			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+			resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
+			reset-names = "qspi", "qspi-ocp";
+			status = "disabled";
+		};
+
+		rst: rstmgr@ffd05000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x100>;
+			altr,modrst-offset = <0x20>;
+		};
+
+		scu: snoop-control-unit@ffffc000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xffffc000 0x100>;
+		};
+
+		sysmgr: sysmgr@ffd06000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd06000 0x300>;
+			cpu1-start-addr = <0xffd06230>;
+		};
+
+		/* Local timer */
+		timer@ffffc600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xffffc600 0x100>;
+			interrupts = <1 13 0xf01>;
+			clocks = <&mpu_periph_clk>;
+		};
+
+		timer0: timer0@ffc02700 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc02700 0x100>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+			resets = <&rst SPTIMER0_RESET>;
+			reset-names = "timer";
+		};
+
+		timer1: timer1@ffc02800 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc02800 0x100>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+			resets = <&rst SPTIMER1_RESET>;
+			reset-names = "timer";
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd00000 0x100>;
+			clocks = <&l4_sys_free_clk>;
+			clock-names = "timer";
+			resets = <&rst L4SYSTIMER0_RESET>;
+			reset-names = "timer";
+		};
+
+		timer3: timer3@ffd00100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd00100 0x100>;
+			clocks = <&l4_sys_free_clk>;
+			clock-names = "timer";
+			resets = <&rst L4SYSTIMER1_RESET>;
+			reset-names = "timer";
+		};
+
+		uart0: serial@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x100>;
+			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst UART0_RESET>;
+			status = "disabled";
+		};
+
+		uart1: serial@ffc02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02100 0x100>;
+			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst UART1_RESET>;
+			status = "disabled";
+		};
+
+		usbphy0: usbphy {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0xffff>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk>;
+			clock-names = "otg";
+			resets = <&rst USB0_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0xffff>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk>;
+			clock-names = "otg";
+			resets = <&rst USB1_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00200 0x100>;
+			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sys_free_clk>;
+			resets = <&rst L4WD0_RESET>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00300 0x100>;
+			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sys_free_clk>;
+			resets = <&rst L4WD1_RESET>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts
new file mode 100644
index 0000000000000..422d00cd4c740
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ */
+/dts-v1/;
+#include "socfpga_arria10_mercury_aa1.dtsi"
+
+/ {
+	model = "Google Chameleon V3";
+	compatible = "google,chameleon-v3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		serial0 = &uart0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	ssm2603: audio-codec@1a {
+		compatible = "adi,ssm2603";
+		reg = <0x1a>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	u80: gpio@21 {
+		compatible = "nxp,pca9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SOM_AUD_MUTE",
+			"DP1_OUT_CEC_EN",
+			"DP2_OUT_CEC_EN",
+			"DP1_SOM_PS8469_CAD",
+			"DPD_SOM_PS8469_CAD",
+			"DP_OUT_PWR_EN",
+			"STM32_RST_L",
+			"STM32_BOOT0",
+
+			"FPGA_PROT",
+			"STM32_FPGA_COMM0",
+			"TP119",
+			"TP120",
+			"TP121",
+			"TP122",
+			"TP123",
+			"TP124";
+	};
+};
+
+&mmc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi
new file mode 100644
index 0000000000000..41f865c8c0985
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ */
+
+#include "socfpga_arria10.dtsi"
+
+/ {
+
+	model = "Enclustra Mercury AA1";
+	compatible = "enclustra,mercury-aa1", "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial1 = &uart1;
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>; /* probe for phy addr */
+
+	max-frame-size = <3800>;
+
+	phy-handle = <&phy3>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy3: ethernet-phy@3 {
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <1860>; /* 960ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	atsha204a: crypto@64 {
+		compatible = "atmel,atsha204a";
+		reg = <0x64>;
+	};
+
+	isl12022: isl12022@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+};
+
+/* Following mappings are taken from arria10 socdk dts */
+&mmc {
+	cap-sd-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+	clock-frequency = <33330000>;
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts
new file mode 100644
index 0000000000000..cf533f76a9fd3
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2023 Steffen Trumtrar <kernel@pengutronix.de>
+ */
+/dts-v1/;
+#include "socfpga_arria10_mercury_aa1.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ PE1";
+	compatible = "enclustra,mercury-pe1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&mmc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk.dtsi
new file mode 100644
index 0000000000000..ec7365444a3b8
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk.dtsi
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
+ */
+#include "socfpga_arria10.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria 10";
+	compatible = "altr,socfpga-arria10-socdk", "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	a10leds {
+		compatible = "gpio-leds";
+
+		a10sr_led0 {
+			label = "a10sr-led0";
+			gpios = <&a10sr_gpio 0 1>;
+		};
+
+		a10sr_led1 {
+			label = "a10sr-led1";
+			gpios = <&a10sr_gpio 1 1>;
+		};
+
+		a10sr_led2 {
+			label = "a10sr-led2";
+			gpios = <&a10sr_gpio 2 1>;
+		};
+
+		a10sr_led3 {
+			label = "a10sr-led3";
+			gpios = <&a10sr_gpio 3 1>;
+		};
+	};
+
+	ref_033v: 033-v-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "0.33V";
+		regulator-min-microvolt = <330000>;
+		regulator-max-microvolt = <330000>;
+	};
+
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>; /* probe for phy addr */
+
+	/*
+	 * These skews assume the user's FPGA design is adding 600ps of delay
+	 * for TX_CLK on Arria 10.
+	 *
+	 * All skews are offset since hardware skew values for the ksz9031
+	 * range from a negative skew to a positive skew.
+	 * See the micrel-ksz90x1.txt Documentation file for details.
+	 */
+	txd0-skew-ps = <0>; /* -420ps */
+	txd1-skew-ps = <0>; /* -420ps */
+	txd2-skew-ps = <0>; /* -420ps */
+	txd3-skew-ps = <0>; /* -420ps */
+	rxd0-skew-ps = <420>; /* 0ps */
+	rxd1-skew-ps = <420>; /* 0ps */
+	rxd2-skew-ps = <420>; /* 0ps */
+	rxd3-skew-ps = <420>; /* 0ps */
+	txen-skew-ps = <0>; /* -420ps */
+	txc-skew-ps = <1860>; /* 960ps */
+	rxdv-skew-ps = <420>; /* 0ps */
+	rxc-skew-ps = <1680>; /* 780ps */
+	max-frame-size = <3800>;
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	resource-manager@0 {
+		compatible = "altr,a10sr";
+		reg = <0>;
+		spi-max-frequency = <100000>;
+		/* low-level active IRQ at GPIO1_5 */
+		interrupt-parent = <&portb>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		a10sr_gpio: gpio-controller {
+			compatible = "altr,a10sr-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		a10sr_rst: reset-controller {
+			compatible = "altr,a10sr-reset";
+			#reset-cells = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	clock-frequency = <100000>;
+	i2c-sda-falling-time-ns = <6000>;
+	i2c-scl-falling-time-ns = <6000>;
+
+	adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&ref_033v>;
+	};
+
+	adc@16 {
+		compatible = "lltc,ltc2497";
+		reg = <0x16>;
+		vref-supply = <&ref_033v>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+
+	ltc@5c {
+		compatible = "ltc2977";
+		reg = <0x5c>;
+	};
+
+	temp@4c {
+		compatible = "maxim,max1619";
+		reg = <0x4c>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts
new file mode 100644
index 0000000000000..a662df319a840
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Altera Corporation. All rights reserved.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Boot and fpga data";
+			reg = <0x0 0x02500000>;
+		};
+		partition@1c00000 {
+			label = "Root Filesystem - JFFS2";
+			reg = <0x02500000 0x05500000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
new file mode 100644
index 0000000000000..11ccdc6c2dc64
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Intel. All rights reserved.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <3>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			label = "Boot and fpga data";
+			reg = <0x0 0x2720000>;
+		};
+
+		partition@qspi-rootfs {
+			label = "Root Filesystem - JFFS2";
+			reg = <0x2720000 0x58E0000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_sdmmc.dts
new file mode 100644
index 0000000000000..d3969367f4b50
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_sdmmc.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014-2015 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
+};
+
+&eccmgr {
+	sdmmca-ecc@ff8c2c00 {
+		compatible = "altr,socfpga-sdmmc-ecc";
+		reg = <0xff8c2c00 0x400>;
+		altr,ecc-parent = <&mmc>;
+		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+			     <47 IRQ_TYPE_LEVEL_HIGH>,
+			     <16 IRQ_TYPE_LEVEL_HIGH>,
+			     <48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria5.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5.dtsi
new file mode 100644
index 0000000000000..40fecde65c54d
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+#include "socfpga.dtsi"
+
+/ {
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		mmc0: mmc@ff704000 {
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd080c4>;
+		};
+	};
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
new file mode 100644
index 0000000000000..c48385702a854
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+#include "socfpga_arria5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria V SoC Development Kit";
+	compatible = "altr,socfpga-arria5-socdk", "altr,socfpga-arria5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		* to be added to the gmac1 device tree blob.
+		*/
+		ethernet0 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-hps0 {
+			label = "hps_led0";
+			gpios = <&porta 0 1>;
+		};
+
+		led-hps1 {
+			label = "hps_led1";
+			gpios = <&portb 11 1>;
+		};
+
+		led-hps2 {
+			label = "hps_led2";
+			gpios = <&porta 17 1>;
+		};
+
+		led-hps3 {
+			label = "hps_led3";
+			gpios = <&porta 18 1>;
+		};
+	};
+
+	regulator_3_3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <5000>;
+	i2c-scl-falling-time-ns = <5000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5.dtsi
new file mode 100644
index 0000000000000..305fe207b237c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+#include "socfpga.dtsi"
+
+/ {
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		mmc0: mmc@ff704000 {
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd080c4>;
+		};
+	};
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_chameleon96.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_chameleon96.dts
new file mode 100644
index 0000000000000..76262f1e5e03f
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_chameleon96.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Chameleon96
+ *
+ * Copyright (c) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Novetech Chameleon96";
+	compatible = "novtech,chameleon96", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x20000000>; /* 512MB */
+	};
+
+	regulator_3_3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led1 {
+			label = "green:user1";
+			gpios = <&porta 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2 {
+			label = "green:user2";
+			gpios = <&porta 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led3 {
+			label = "green:user3";
+			gpios = <&porta 25 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		user_led4 {
+			label = "green:user4";
+			gpios = <&portb 3 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	/* On Low speed expansion */
+	label = "LS-I2C0";
+	status = "okay";
+};
+
+&i2c1 {
+	/* On Low speed expansion */
+	label = "LS-I2C1";
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	/* On High speed expansion */
+	label = "HS-I2C2";
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&spi0 {
+	/* On High speed expansion */
+	label = "HS-SPI1";
+	status = "okay";
+};
+
+&spi1 {
+	/* On Low speed expansion */
+	label = "LS-SPI0";
+	status = "okay";
+};
+
+&uart0 {
+	/* On Low speed expansion */
+	label = "LS-UART1";
+	status = "okay";
+};
+
+&uart1 {
+	/* On Low speed expansion */
+	label = "LS-UART0";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de0_nano_soc.dts
new file mode 100644
index 0000000000000..bedf577cb056c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de0_nano_soc.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Terasic DE-0(Atlas)";
+	compatible = "terasic,de0-atlas", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-hps0 {
+			label = "hps_led0";
+			gpios = <&portb 24 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	txd0-skew-ps = <0>; /* -420ps */
+	txd1-skew-ps = <0>; /* -420ps */
+	txd2-skew-ps = <0>; /* -420ps */
+	txd3-skew-ps = <0>; /* -420ps */
+	rxd0-skew-ps = <420>; /* 0ps */
+	rxd1-skew-ps = <420>; /* 0ps */
+	rxd2-skew-ps = <420>; /* 0ps */
+	rxd3-skew-ps = <420>; /* 0ps */
+	txen-skew-ps = <0>; /* -420ps */
+	txc-skew-ps = <1860>; /* 960ps */
+	rxdv-skew-ps = <420>; /* 0ps */
+	rxc-skew-ps = <1680>; /* 780ps */
+
+	max-frame-size = <3800>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	adxl345: adxl345@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+
+		interrupt-parent = <&portc>;
+		interrupts = <3 2>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcv.dtsi
new file mode 100644
index 0000000000000..3b9daddf91cd2
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcv.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Aries/DENX MCV";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 GiB */
+	};
+};
+
+&mmc0 {	/* On-SoM eMMC */
+	bus-width = <8>;
+	clk-phase-sd-hs = <0>, <135>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
new file mode 100644
index 0000000000000..ceaec29770c6e
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5_mcv.dtsi"
+
+/ {
+	model = "Aries/DENX MCV EVK";
+	compatible = "denx,mcvevk", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		stmpe-i2c0 = &stmpe1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpio0 {	/* GPIO  0 ... 28 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 29 ... 57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	stmpe1: stmpe811@41 {
+		compatible = "st,stmpe811";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		irq-gpio = <&portb 28 0x4>;     /* GPIO 57, trig. level HI */
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			ts,sample-time = <4>;
+			ts,mod-12b = <1>;
+			ts,ref-sel = <0>;
+			ts,adc-freq = <1>;
+			ts,ave-ctrl = <1>;
+			ts,touch-det-delay = <3>;
+			ts,settling = <4>;
+			ts,fraction-z = <7>;
+			ts,i-drive = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
new file mode 100644
index 0000000000000..c7f5fa0ba0f28
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
+	compatible = "altr,socfpga-cyclone5-socdk", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-hps0 {
+			label = "hps_led0";
+			gpios = <&portb 15 1>;
+		};
+
+		led-hps1 {
+			label = "hps_led1";
+			gpios = <&portb 14 1>;
+		};
+
+		led-hps2 {
+			label = "hps_led2";
+			gpios = <&portb 13 1>;
+		};
+
+		led-hps3 {
+			label = "hps_led3";
+			gpios = <&portb 12 1>;
+		};
+	};
+
+	regulator_3_3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <5000>;
+	i2c-scl-falling-time-ns = <5000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&portb 18 0>;
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;	/* chip select */
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
new file mode 100644
index 0000000000000..3dd99c7c95e0c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Terasic SoCkit";
+	compatible = "terasic,socfpga-cyclone5-sockit", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		hps_led0 {
+			label = "hps:blue:led0";
+			gpios = <&portb 24 0>;	/* HPS_GPIO53 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led1 {
+			label = "hps:blue:led1";
+			gpios = <&portb 25 0>;	/* HPS_GPIO54 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led2 {
+			label = "hps:blue:led2";
+			gpios = <&portb 26 0>;	/* HPS_GPIO55 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led3 {
+			label = "hps:blue:led3";
+			gpios = <&portb 27 0>;	/* HPS_GPIO56 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hps_sw0 {
+			label = "hps_sw0";
+			gpios = <&portc 20 0>;	/* HPS_GPI7 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x0>;	/* SW_LID */
+		};
+
+		hps_sw1 {
+			label = "hps_sw1";
+			gpios = <&portc 19 0>;	/* HPS_GPI6 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x5>;	/* SW_DOCK */
+		};
+
+		hps_sw2 {
+			label = "hps_sw2";
+			gpios = <&portc 18 0>;	/* HPS_GPI5 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0xa>;	/* SW_KEYPAD_SLIDE */
+		};
+
+		hps_sw3 {
+			label = "hps_sw3";
+			gpios = <&portc 17 0>;	/* HPS_GPI4 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0xc>;	/* SW_ROTATE_LOCK */
+		};
+
+		hps_hkey0 {
+			label = "hps_hkey0";
+			gpios = <&portc 21 1>;	/* HPS_GPI8 */
+			linux,code = <187>;	/* KEY_F17 */
+		};
+
+		hps_hkey1 {
+			label = "hps_hkey1";
+			gpios = <&portc 22 1>;	/* HPS_GPI9 */
+			linux,code = <188>;	/* KEY_F18 */
+		};
+
+		hps_hkey2 {
+			label = "hps_hkey2";
+			gpios = <&portc 23 1>;	/* HPS_GPI10 */
+			linux,code = <189>;	/* KEY_F19 */
+		};
+
+		hps_hkey3 {
+			label = "hps_hkey3";
+			gpios = <&portc 24 1>;	/* HPS_GPI11 */
+			linux,code = <190>;	/* KEY_F20 */
+		};
+	};
+
+	regulator_3_3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&gpio0 {	/* GPIO 0..29 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 30..57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	accel1: accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+
+		interrupt-parent = <&portc>;
+		interrupts = <3 2>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socrates.dts
new file mode 100644
index 0000000000000..ca18b959e6559
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socrates.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "EBV SOCrates";
+	compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	leds: gpio-leds {
+	};
+};
+
+&gmac1 {
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t82";
+		reg = <0x68>;
+	};
+};
+
+&leds {
+	compatible = "gpio-leds";
+
+	led0 {
+		label = "led:green:heartbeat";
+		gpios = <&porta 28 1>;
+		linux,default-trigger = "heartbeat";
+	};
+
+	led1 {
+		label = "led:green:D7";
+		gpios = <&portb 19 1>;
+	};
+
+	led2 {
+		label = "led:green:D8";
+		gpios = <&portb 25 1>;
+	};
+};
+
+&mmc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
new file mode 100644
index 0000000000000..2564671fc1c67
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Altera SOCFPGA Cyclone V SoC Macnica Sodia board";
+	compatible = "macnica,sodia", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		hps_led0 {
+			label = "hps:green:led0";
+			gpios = <&portb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led1 {
+			label = "hps:green:led1";
+			gpios = <&portb 13 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led2 {
+			label = "hps:green:led2";
+			gpios = <&portb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led3 {
+			label = "hps:green:led3";
+			gpios = <&portb 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&portb 18 0>;
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q512a", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
new file mode 100644
index 0000000000000..e0630b0eed036
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "samtec VIN|ING FPGA";
+	compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/*
+		 * This allow the ethaddr uboot environment variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+		ethernet1 = &gmac0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hps_temp0 {
+			label = "BTN_0";			/* TEMP_OS */
+			gpios = <&portc 18 GPIO_ACTIVE_LOW>;	/* HPS_GPI5 */
+			linux,code = <BTN_0>;
+		};
+
+		hps_hkey0 {
+			label = "GP_SWITCH";			/* GP_SWITCH */
+			gpios = <&portc 19 GPIO_ACTIVE_LOW>;	/* HPS_GPI6 */
+			linux,code = <BTN_1>;
+		};
+
+		hps_hkey1 {
+			label = "RESET_SWITCH";			/* RESET_SWITCH */
+			gpios = <&portc 20 GPIO_ACTIVE_LOW>;	/* HPS_GPI7 */
+			linux,code = <BTN_2>;
+		};
+
+		hps_hkey2 {
+			label = "POWER_DOWN";			/* POWER_DOWN */
+			gpios = <&portc 4 GPIO_ACTIVE_LOW>;	/* HPS_GPIO62 */
+			linux,code = <KEY_POWER>;
+		};
+
+		hps_hkey3 {
+			label = "SENSE";			/* SENSE */
+			gpios = <&porta 9 GPIO_ACTIVE_LOW>;	/* HPS_GPIO9 */
+			linux,code = <BTN_3>;
+		};
+	};
+
+	regulator-usb-nrst {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_nrst";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&portb 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy1>;
+
+	snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <10000 10000 10000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+			txc-skew-ps = <1860>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <1860>;
+		};
+	};
+};
+
+&gpio0 {	/* GPIO 0..29 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 30..57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	gpio: pca9557@1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	temp: lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
+	at24@50 {
+		compatible = "atmel,24c01";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c@6 {	/* Backplane EEPROM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			eeprom@51 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {	/* Power board EEPROM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			eeprom@51 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	at24@50 {
+		compatible = "atmel,24c02";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128", "jedec,spi-nor";
+		reg = <0>;		/* chip select */
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <1>;		/* chip select */
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
+
+&usb0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_vt.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_vt.dts
new file mode 100644
index 0000000000000..845ab2cc5ce61
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_vt.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+#include "socfpga.dtsi"
+
+/ {
+	model = "Altera SOCFPGA VT";
+	compatible = "altr,socfpga-vt", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <10000000>;
+				};
+			};
+		};
+
+		mmc@ff704000 {
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+		};
+
+		ethernet@ff700000 {
+			phy-mode = "gmii";
+			status = "okay";
+		};
+
+		timer0@ffc08000 {
+			clock-frequency = <7000000>;
+		};
+
+		timer1@ffc09000 {
+			clock-frequency = <7000000>;
+		};
+
+		timer2@ffd00000 {
+			clock-frequency = <7000000>;
+		};
+
+		timer3@ffd01000 {
+			clock-frequency = <7000000>;
+		};
+
+		serial@ffc02000 {
+			clock-frequency = <7372800>;
+		};
+
+		serial@ffc03000 {
+			clock-frequency = <7372800>;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd08010>;
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "gmii";
+};
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
deleted file mode 100644
index 03caea6fc6ffa..0000000000000
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ /dev/null
@@ -1,375 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board
- *
- * Copyright (C) 2017 Renesas Electronics Corp.
- */
-
-/*
- * SSI-SGTL5000
- *
- * This command is required when Playback/Capture
- *
- *      amixer set "DVC Out" 100%
- *      amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- *      amixer set "DVC Out Mute" on
- *      amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
- *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- *      amixer set "DVC Out Ramp" on
- *      aplay xxx.wav &
- *      amixer set "DVC Out"  80%  // Volume Down
- *      amixer set "DVC Out" 100%  // Volume Up
- */
-
-/ {
-	aliases {
-		serial0 = &scif0;
-		serial3 = &scifb1;
-		ethernet0 = &avb;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = "serial0:115200n8";
-	};
-
-	audio_clock: audio_clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	lcd_backlight: backlight {
-		compatible = "pwm-backlight";
-
-		pwms = <&pwm3 0 5000000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
-	};
-
-	lvds-receiver {
-		compatible = "ti,ds90cf384a", "lvds-decoder";
-		power-supply = <&vcc_3v3_tft1>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				lvds_receiver_in: endpoint {
-					remote-endpoint = <&lvds0_out>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				lvds_receiver_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
-
-	panel {
-		compatible = "edt,etm0700g0dh6";
-		backlight = <&lcd_backlight>;
-		power-supply = <&vcc_3v3_tft1>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds_receiver_out>;
-			};
-		};
-	};
-
-	reg_1p5v: 1p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P5V";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-	};
-
-	rsnd_sgtl5000: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-
-	vcc_3v3_tft1: regulator-panel {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vcc-3v3-tft1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		startup-delay-us = <500>;
-		gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
-	};
-
-	vcc_sdhi1: regulator-vcc-sdhi1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI1 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio1 16 GPIO_ACTIVE_LOW>;
-	};
-
-	vccq_sdhi1: regulator-vccq-sdhi1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-};
-
-&avb {
-	pinctrl-0 = <&avb_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy3>;
-	phy-mode = "gmii";
-	renesas,no-ether-link;
-	status = "okay";
-
-	phy3: ethernet-phy@3 {
-		compatible = "ethernet-phy-id0022.1622",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <3>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&can0 {
-	pinctrl-0 = <&can0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&cmt0 {
-	status = "okay";
-};
-
-&du {
-	status = "okay";
-};
-
-&gpio2 {
-	touch-interrupt-hog {
-		gpio-hog;
-		gpios = <12 GPIO_ACTIVE_LOW>;
-		input;
-	};
-};
-
-&hsusb {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	rtc@68 {
-		compatible = "ti,bq32000";
-		reg = <0x68>;
-	};
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		clocks = <&audio_clock>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		VDDD-supply = <&reg_1p5v>;
-	};
-
-	touch: touchpanel@38 {
-		compatible = "edt,edt-ft5406";
-		reg = <0x38>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
-		vcc-supply = <&vcc_3v3_tft1>;
-	};
-};
-
-&lvds0 {
-	status = "okay";
-
-	ports {
-		port@1 {
-			lvds0_out: endpoint {
-				remote-endpoint = <&lvds_receiver_in>;
-			};
-		};
-	};
-};
-
-&pci0 {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&pcie_bus_clk {
-	clock-frequency = <100000000>;
-};
-
-&pfc {
-	can0_pins: can0 {
-		groups = "can0_data_d";
-		function = "can0";
-	};
-
-	avb_pins: avb {
-		groups = "avb_mdio", "avb_gmii";
-		function = "avb";
-	};
-
-	i2c2_pins: i2c2 {
-		groups = "i2c2";
-		function = "i2c2";
-	};
-
-	pwm3_pins: pwm3 {
-		groups = "pwm3";
-		function = "pwm3";
-	};
-
-	scif0_pins: scif0 {
-		groups = "scif0_data_d";
-		function = "scif0";
-	};
-
-	scifb1_pins: scifb1 {
-		groups = "scifb1_data_d", "scifb1_ctrl";
-		function = "scifb1";
-	};
-
-	sdhi1_pins: sd1 {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <3300>;
-	};
-
-	sdhi1_pins_uhs: sd1_uhs {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <1800>;
-	};
-
-	sound_pins: sound {
-		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
-		function = "ssi";
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
-	};
-};
-
-&pwm3 {
-	pinctrl-0 = <&pwm3_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi1>, <&src3>, <&dvc1>;
-			capture = <&ssi0>, <&src2>, <&dvc0>;
-		};
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scifb1 {
-	pinctrl-0 = <&scifb1_pins>;
-	pinctrl-names = "default";
-
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-1 = <&sdhi1_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi1>;
-	vqmmc-supply = <&vccq_sdhi1>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-	sd-uhs-sdr50;
-	status = "okay";
-};
-
-&ssi1 {
-	shared-pin;
-};
-
-&usbphy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
deleted file mode 100644
index e10f99278c77a..0000000000000
--- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module
- *
- * Copyright (C) 2017 Renesas Electronics Corp.
- */
-
-/ {
-	aliases {
-		serial1 = &scif1;
-		serial4 = &hscif1;
-	};
-
-	cec_clock: cec-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_out: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-};
-
-&can1 {
-	pinctrl-0 = <&can1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&du {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7511_in>;
-			};
-		};
-	};
-};
-
-&hscif1 {
-	pinctrl-0 = <&hscif1_pins>;
-	pinctrl-names = "default";
-
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	hdmi@39 {
-		compatible = "adi,adv7511w";
-		reg = <0x39>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&cec_clock>;
-		clock-names = "cec";
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7511_in: endpoint {
-					remote-endpoint = <&du_out_rgb>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				adv7511_out: endpoint {
-					remote-endpoint = <&hdmi_con_out>;
-				};
-			};
-		};
-	};
-};
-
-&pfc {
-	can1_pins: can1 {
-		groups = "can1_data_d";
-		function = "can1";
-	};
-
-	du_pins: du {
-		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
-		function = "du";
-	};
-
-	hscif1_pins: hscif1 {
-		groups = "hscif1_data_c", "hscif1_ctrl_c";
-		function = "hscif1";
-	};
-
-	scif1_pins: scif1 {
-		groups = "scif1_data_d";
-		function = "scif1";
-	};
-};
-
-&scif1 {
-	pinctrl-0 = <&scif1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
deleted file mode 100644
index 0397c3423d2db..0000000000000
--- a/arch/arm/boot/dts/keystone-clocks.dtsi
+++ /dev/null
@@ -1,438 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Keystone 2 clock tree
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-clocks {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	mainmuxclk: mainmuxclk@2310108 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-mux-clock";
-		clocks = <&mainpllclk>, <&refclksys>;
-		reg = <0x02310108 4>;
-		bit-shift = <23>;
-		bit-mask = <1>;
-		clock-output-names = "mainmuxclk";
-	};
-
-	chipclk1: chipclk1 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&mainmuxclk>;
-		clock-div = <1>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1";
-	};
-
-	chipclk1rstiso: chipclk1rstiso {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&mainmuxclk>;
-		clock-div = <1>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso";
-	};
-
-	gemtraceclk: gemtraceclk@2310120 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-divider-clock";
-		clocks = <&mainmuxclk>;
-		reg = <0x02310120 4>;
-		bit-shift = <0>;
-		bit-mask = <8>;
-		clock-output-names = "gemtraceclk";
-	};
-
-	chipstmxptclk: chipstmxptclk@2310164 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-divider-clock";
-		clocks = <&mainmuxclk>;
-		reg = <0x02310164 4>;
-		bit-shift = <0>;
-		bit-mask = <8>;
-		clock-output-names = "chipstmxptclk";
-	};
-
-	chipclk12: chipclk12 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <2>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk12";
-	};
-
-	chipclk13: chipclk13 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <3>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk13";
-	};
-
-	paclk13: paclk13 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&papllclk>;
-		clock-div = <3>;
-		clock-mult = <1>;
-		clock-output-names = "paclk13";
-	};
-
-	chipclk14: chipclk14 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <4>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk14";
-	};
-
-	chipclk16: chipclk16 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <6>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk16";
-	};
-
-	chipclk112: chipclk112 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <12>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk112";
-	};
-
-	chipclk124: chipclk124 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <24>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk114";
-	};
-
-	chipclk1rstiso13: chipclk1rstiso13 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1rstiso>;
-		clock-div = <3>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso13";
-	};
-
-	chipclk1rstiso14: chipclk1rstiso14 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1rstiso>;
-		clock-div = <4>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso14";
-	};
-
-	chipclk1rstiso16: chipclk1rstiso16 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1rstiso>;
-		clock-div = <6>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso16";
-	};
-
-	chipclk1rstiso112: chipclk1rstiso112 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1rstiso>;
-		clock-div = <12>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso112";
-	};
-
-	clkmodrst0: clkmodrst0@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "modrst0";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-
-	clkusb: clkusb@2350008 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "usb";
-		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkaemifspi: clkaemifspi@235000c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "aemif-spi";
-		reg = <0x0235000c 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-
-	clkdebugsstrc: clkdebugsstrc@2350014 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "debugss-trc";
-		reg = <0x02350014 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <1>;
-	};
-
-	clktetbtrc: clktetbtrc@2350018 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tetb-trc";
-		reg = <0x02350018 0xb00>, <0x02350004 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <1>;
-	};
-
-	clkpa: clkpa@235001c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&paclk13>;
-		clock-output-names = "pa";
-		reg = <0x0235001c 0xb00>, <0x02350008 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <2>;
-	};
-
-	clkcpgmac: clkcpgmac@2350020 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkpa>;
-		clock-output-names = "cpgmac";
-		reg = <0x02350020 0xb00>, <0x02350008 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <2>;
-	};
-
-	clksa: clksa@2350024 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkpa>;
-		clock-output-names = "sa";
-		reg = <0x02350024 0xb00>, <0x02350008 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <2>;
-	};
-
-	clkpcie: clkpcie@2350028 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "pcie";
-		reg = <0x02350028 0xb00>, <0x0235000c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <3>;
-	};
-
-	clksr: clksr@2350034 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1rstiso112>;
-		clock-output-names = "sr";
-		reg = <0x02350034 0xb00>, <0x02350018 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <6>;
-	};
-
-	clkgem0: clkgem0@235003c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem0";
-		reg = <0x0235003c 0xb00>, <0x02350020 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <8>;
-	};
-
-	clkddr30: clkddr30@235005c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "ddr3-0";
-		reg = <0x0235005c 0xb00>, <0x02350040 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <16>;
-	};
-
-	clkwdtimer0: clkwdtimer0@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer0";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkwdtimer1: clkwdtimer1@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer1";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkwdtimer2: clkwdtimer2@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer2";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkwdtimer3: clkwdtimer3@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer3";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clktimer15: clktimer15@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer15";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkuart0: clkuart0@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "uart0";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkuart1: clkuart1@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "uart1";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkaemif: clkaemif@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkaemifspi>;
-		clock-output-names = "aemif";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkusim: clkusim@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "usim";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clki2c: clki2c@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "i2c";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkspi: clkspi@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkaemifspi>;
-		clock-output-names = "spi";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkgpio: clkgpio@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "gpio";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkkeymgr: clkkeymgr@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "keymgr";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	/*
-	 * Below are set of fixed, input clocks definitions,
-	 * for which real frequencies have to be defined in board files.
-	 * Those clocks can be used as reference clocks for some HW modules
-	 * (as cpts, for example) by configuring corresponding clock muxes.
-	 */
-	timi0: timi0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-		clock-output-names = "timi0";
-	};
-
-	timi1: timi1 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-		clock-output-names = "timi1";
-	};
-
-	tsrefclk: tsrefclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-		clock-output-names = "tsrefclk";
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
deleted file mode 100644
index cf30e007fea38..0000000000000
--- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Edison SoC specific device tree
- *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-clocks {
-	mainpllclk: mainpllclk@2310110 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
-		reg-names = "control", "multiplier", "post-divider";
-	};
-
-	papllclk: papllclk@2620358 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkpass>;
-		clock-output-names = "papllclk";
-		reg = <0x02620358 4>;
-		reg-names = "control";
-	};
-
-	ddr3apllclk: ddr3apllclk@2620360 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkddr3a>;
-		clock-output-names = "ddr-3a-pll-clk";
-		reg = <0x02620360 4>;
-		reg-names = "control";
-	};
-
-	clkusb1: clkusb1@2350004 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "usb1";
-		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkhyperlink0: clkhyperlink0@2350030 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "hyperlink-0";
-		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <5>;
-	};
-
-	clkpcie1: clkpcie1@235006c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "pcie1";
-		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <18>;
-	};
-
-	clkxge: clkxge@23500c8 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "xge";
-		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <29>;
-	};
-
-	/*
-	 * Below are set of fixed, input clocks definitions,
-	 * for which real frequencies have to be defined in board files.
-	 * Those clocks can be used as reference clocks for some HW modules
-	 * (as cpts, for example) by configuring corresponding clock muxes.
-	 */
-	tsipclka: tsipclka {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-		clock-output-names = "tsipclka";
-	};
-
-	tsipclkb: tsipclkb {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-		clock-output-names = "tsipclkb";
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
deleted file mode 100644
index abd5aef8b87dc..0000000000000
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Edison EVM device tree
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "keystone-k2e.dtsi"
-
-/ {
-	compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone";
-	model = "Texas Instruments Keystone 2 Edison EVM";
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		dsp_common_memory: dsp-common-memory@81f800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
-			reusable;
-			status = "okay";
-		};
-	};
-};
-
-&soc0 {
-
-		clocks {
-			refclksys: refclksys {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-sys";
-			};
-
-			refclkpass: refclkpass {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-pass";
-			};
-
-			refclkddr3a: refclkddr3a {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-ddr3a";
-			};
-		};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&keystone_usb0 {
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "host";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&keystone_usb1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-};
-
-&i2c0 {
-	dtt@50 {
-		compatible = "atmel,24c1024";
-		reg = <0x50>;
-	};
-};
-
-&aemif {
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <0>;
-		/* all timings in nanoseconds */
-		ti,cs-min-turnaround-ns = <12>;
-		ti,cs-read-hold-ns = <6>;
-		ti,cs-read-strobe-ns = <23>;
-		ti,cs-read-setup-ns = <9>;
-		ti,cs-write-hold-ns = <8>;
-		ti,cs-write-strobe-ns = <23>;
-		ti,cs-write-setup-ns = <8>;
-
-		nand@0,0 {
-			compatible = "ti,keystone-nand","ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0 0x4000000
-			       1 0 0x0000100>;
-
-			ti,davinci-chipselect = <0>;
-			ti,davinci-mask-ale = <0x2000>;
-			ti,davinci-mask-cle = <0x4000>;
-			ti,davinci-mask-chipsel = <0>;
-			nand-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			nand-on-flash-bbt;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "params";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "ubifs";
-				reg = <0x180000 0x1FE80000>;
-			};
-		};
-	};
-};
-
-&spi0 {
-	nor_flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		spi-max-frequency = <54000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "misc";
-			reg = <0x80000 0xf80000>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-	ethphy0: ethernet-phy@0 {
-		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&dsp0 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
deleted file mode 100644
index 42cf74db673cc..0000000000000
--- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
+++ /dev/null
@@ -1,264 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Keystone 2 Edison Netcp driver
- *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-qmss: qmss@2a40000 {
-	compatible = "ti,keystone-navigator-qmss";
-	dma-coherent;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	clocks = <&chipclk13>;
-	ranges;
-	queue-range = <0 0x2000>;
-	linkram0 = <0x100000 0x4000>;
-	linkram1 = <0 0x10000>;
-
-	qmgrs {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		qmgr0 {
-			managed-queues = <0 0x2000>;
-			reg = <0x2a40000 0x20000>,
-			      <0x2a06000 0x400>,
-			      <0x2a02000 0x1000>,
-			      <0x2a03000 0x1000>,
-			      <0x23a80000 0x20000>,
-			      <0x2a80000 0x20000>;
-			reg-names = "peek", "status", "config",
-				    "region", "push", "pop";
-		};
-	};
-	queue-pools {
-		qpend {
-			qpend-0 {
-				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
-			};
-			qpend-1 {
-				qrange = <528 16>;
-				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
-					      0 51 0xf04 0 52 0xf04 0 53 0xf04
-					      0 54 0xf04 0 55 0xf04 0 56 0xf04
-					      0 57 0xf04 0 58 0xf04 0 59 0xf04
-					      0 60 0xf04 0 61 0xf04 0 62 0xf04
-					      0 63 0xf04>;
-				qalloc-by-id;
-			};
-			qpend-2 {
-				qrange = <544 16>;
-				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
-					      0 59 0xf04 0 68 0xf04 0 69 0xf04
-					      0 70 0xf04 0 71 0xf04 0 72 0xf04
-					      0 73 0xf04 0 74 0xf04 0 75 0xf04
-					      0 76 0xf04 0 77 0xf04 0 78 0xf04
-					      0 79 0xf04>;
-			};
-		};
-		general-purpose {
-			gp-0 {
-				qrange = <4000 64>;
-			};
-			netcp-tx {
-				qrange = <896 128>;
-				qalloc-by-id;
-			};
-		};
-		accumulator {
-			acc-low-0 {
-				qrange = <480 32>;
-				accumulator = <0 47 16 2 50>;
-				interrupts = <0 226 0xf01>;
-				multi-queue;
-				qalloc-by-id;
-			};
-		};
-	};
-
-	descriptor-regions {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		region-12 {
-			id = <12>;
-			region-spec = <8192 128>;	/* num_desc desc_size */
-			link-index = <0x4000>;
-		};
-	};
-
-	pdsps {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		pdsp0@2a10000 {
-			reg = <0x2a10000 0x1000    /*iram */
-			       0x2a0f000 0x100     /*reg*/
-			       0x2a0c000 0x3c8	   /*intd */
-			       0x2a20000 0x4000>;  /*cmd*/
-			id = <0>;
-		};
-	};
-}; /* qmss */
-
-knav_dmas: knav_dmas@0 {
-	compatible = "ti,keystone-navigator-dma";
-	clocks = <&papllclk>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	ti,navigator-cloud-address = <0x23a80000 0x23a90000
-				 0x23a80000 0x23a90000>;
-
-	dma_gbe: dma_gbe@0 {
-		reg = <0x24186000 0x100>,
-			  <0x24187000 0x2a0>,
-			  <0x24188000 0xb60>,
-			  <0x24186100 0x80>,
-			  <0x24189000 0x1000>;
-		reg-names = "global", "txchan", "rxchan",
-				"txsched", "rxflow";
-	};
-};
-
-netcp: netcp@24000000 {
-	reg = <0x2620110 0x8>;
-	reg-names = "efuse";
-	compatible = "ti,netcp-1.0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	/* NetCP address range */
-	ranges = <0 0x24000000 0x1000000>;
-
-	clocks = <&clkpa>, <&clkcpgmac>;
-	clock-names = "pa_clk", "ethss_clk";
-	dma-coherent;
-
-	ti,navigator-dmas = <&dma_gbe 0>,
-			<&dma_gbe 8>,
-			<&dma_gbe 0>;
-	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
-
-	netcp-devices {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		gbe@200000 { /* ETHSS */
-			label = "netcp-gbe";
-			compatible = "ti,netcp-gbe-9";
-			reg = <0x200000 0x900>, <0x220000 0x20000>;
-			/* enable-ale; */
-			tx-queue = <896>;
-			tx-channel = "nettx";
-
-			cpts {
-				clocks = <&cpts_refclk_mux>;
-				clock-names = "cpts";
-
-				cpts_refclk_mux: cpts-refclk-mux {
-					#clock-cells = <0>;
-					clocks = <&chipclk12>, <&chipclk13>,
-						 <&timi0>, <&timi1>,
-						 <&tsipclka>, <&tsrefclk>,
-						 <&tsipclkb>;
-					ti,mux-tbl = <0x0>, <0x1>, <0x2>,
-						<0x3>, <0x4>, <0x8>, <0xC>;
-					assigned-clocks = <&cpts_refclk_mux>;
-					assigned-clock-parents = <&chipclk12>;
-				};
-			};
-
-			interfaces {
-				gbe0: interface-0 {
-					slave-port = <0>;
-					link-interface = <1>;
-					phy-handle = <&ethphy0>;
-				};
-				gbe1: interface-1 {
-					slave-port = <1>;
-					link-interface = <1>;
-					phy-handle = <&ethphy1>;
-				};
-			};
-
-			secondary-slave-ports {
-				port-2 {
-					slave-port = <2>;
-					link-interface = <2>;
-				};
-				port-3 {
-					slave-port = <3>;
-					link-interface = <2>;
-				};
-				port-4 {
-					slave-port = <4>;
-					link-interface = <2>;
-				};
-				port-5 {
-					slave-port = <5>;
-					link-interface = <2>;
-				};
-				port-6 {
-					slave-port = <6>;
-					link-interface = <2>;
-				};
-				port-7 {
-					slave-port = <7>;
-					link-interface = <2>;
-				};
-			};
-		};
-	};
-
-	netcp-interfaces {
-		interface-0 {
-			rx-channel = "netrx0";
-			rx-pool = <1024 12>;
-			tx-pool = <1024 12>;
-			rx-queue-depth = <128 128 0 0>;
-			rx-buffer-size = <1518 4096 0 0>;
-			rx-queue = <528>;
-			tx-completion-queue = <530>;
-			efuse-mac = <1>;
-			netcp-gbe = <&gbe0>;
-
-		};
-		interface-1 {
-			rx-channel = "netrx1";
-			rx-pool = <1024 12>;
-			tx-pool = <1024 12>;
-			rx-queue-depth = <128 128 0 0>;
-			rx-buffer-size = <1518 4096 0 0>;
-			rx-queue = <529>;
-			tx-completion-queue = <531>;
-			efuse-mac = <0>;
-			local-mac-address = [02 18 31 7e 3e 00];
-			netcp-gbe = <&gbe1>;
-		};
-	};
-};
-
-sa_subsys: subsys@24080000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "simple-bus";
-	ranges = <0 0x24080000 0x40000>;
-
-	sa_config: subsys@0 {
-		compatible = "syscon";
-		reg = <0x0 0x100>;
-	};
-
-	rng@24000 {
-		compatible = "ti,keystone-rng";
-		reg = <0x24000 0x1000>;
-		ti,syscon-sa-cfg = <&sa_config>;
-		clocks = <&clksa>;
-		clock-names = "fck";
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
deleted file mode 100644
index 65c32946c5223..0000000000000
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ /dev/null
@@ -1,198 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Edison soc device tree
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include <dt-bindings/reset/ti-syscon.h>
-
-/ {
-	compatible = "ti,k2e", "ti,keystone";
-	model = "Texas Instruments Keystone 2 Edison SoC";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gic>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <3>;
-		};
-	};
-
-	aliases {
-		rproc0 = &dsp0;
-	};
-};
-
-&soc0 {
-		/include/ "keystone-k2e-clocks.dtsi"
-
-		usb: usb@2680000 {
-			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
-			usb@2690000 {
-				interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
-			};
-		};
-
-		usb1_phy: usb_phy@2620750 {
-			compatible = "ti,keystone-usbphy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x2620750 24>;
-			status = "disabled";
-		};
-
-		keystone_usb1: usb@25000000 {
-			compatible = "ti,keystone-dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x25000000 0x10000>;
-			clocks = <&clkusb1>;
-			clock-names = "usb";
-			interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
-			ranges;
-			dma-coherent;
-			dma-ranges;
-			status = "disabled";
-
-			usb1: usb@25010000 {
-				compatible = "snps,dwc3";
-				reg = <0x25010000 0x70000>;
-				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
-				usb-phy = <&usb1_phy>, <&usb1_phy>;
-			};
-		};
-
-		msm_ram: sram@c000000 {
-			compatible = "mmio-sram";
-			reg = <0x0c000000 0x200000>;
-			ranges = <0x0 0x0c000000 0x200000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			bm-sram@1f0000 {
-				reg = <0x001f0000 0x8000>;
-			};
-		};
-
-		psc: power-sleep-controller@2350000 {
-			pscrst: reset-controller {
-				compatible = "ti,k2e-pscrst", "ti,syscon-reset";
-				#reset-cells = <1>;
-
-				ti,reset-bits = <
-					0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
-				>;
-			};
-		};
-
-		devctrl: device-state-control@2620000 {
-			dspgpio0: keystone_dsp_gpio@240 {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x240 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x240>;
-			};
-		};
-
-		dsp0: dsp@10800000 {
-			compatible = "ti,k2e-dsp";
-			reg = <0x10800000 0x00080000>,
-			      <0x10e00000 0x00008000>,
-			      <0x10f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			clocks = <&clkgem0>;
-			ti,syscon-dev = <&devctrl 0x844>;
-			resets = <&pscrst 0>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <0 8>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio0 27 0>;
-			status = "disabled";
-		};
-
-		pcie1: pcie@21020000 {
-			compatible = "ti,keystone-pcie","snps,dw-pcie";
-			clocks = <&clkpcie1>;
-			clock-names = "pcie";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
-			ranges = <0x82000000 0 0x60000000 0x60000000
-				  0 0x10000000>;
-
-			status = "disabled";
-			device_type = "pci";
-			num-lanes = <2>;
-			bus-range = <0x00 0xff>;
-
-			/* error interrupt */
-			interrupts = <GIC_SPI 385 IRQ_TYPE_EDGE_RISING>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */
-					<0 0 0 2 &pcie_intc1 1>, /* INT B */
-					<0 0 0 3 &pcie_intc1 2>, /* INT C */
-					<0 0 0 4 &pcie_intc1 3>; /* INT D */
-
-			pcie_msi_intc1: msi-interrupt-controller {
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 379 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 380 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 381 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 382 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 383 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 384 IRQ_TYPE_EDGE_RISING>;
-			};
-
-			pcie_intc1: legacy-interrupt-controller {
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
-			};
-		};
-
-		mdio: mdio@24200f00 {
-			compatible = "ti,keystone_mdio", "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x24200f00 0x100>;
-			status = "disabled";
-			clocks = <&clkcpgmac>;
-			clock-names = "fck";
-			bus_freq = <2500000>;
-		};
-		/include/ "keystone-k2e-netcp.dtsi"
-};
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
deleted file mode 100644
index 3a87b7943c706..0000000000000
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ /dev/null
@@ -1,567 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for K2G EVM
- *
- * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-/dts-v1/;
-
-#include "keystone-k2g.dtsi"
-
-/ {
-	compatible =  "ti,k2g-evm", "ti,k2g", "ti,keystone";
-	model = "Texas Instruments K2G General Purpose EVM";
-
-	memory@800000000 {
-		device_type = "memory";
-		reg = <0x00000008 0x00000000 0x00000000 0x80000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		dsp_common_memory: dsp-common-memory@81f800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	vcc3v3_dcin_reg: fixedregulator-vcc3v3-dcin {
-		compatible = "regulator-fixed";
-		regulator-name = "mmc0_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vcc1v8_ldo1_reg: fixedregulator-vcc1v8-ldo1 {
-		compatible = "regulator-fixed";
-		regulator-name = "ldo1";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	vcc1v8_ldo2_reg: fixedregulator-vcc1v8-ldo2 {
-		compatible = "regulator-fixed";
-		regulator-name = "ldo2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	hdmi: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&sii9022_out>;
-			};
-		};
-	};
-
-	aud_mclk: aud_mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12288000>;
-	};
-
-	sound0: sound@0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "K2G-EVM";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Headphone Jack",	"HPLOUT",
-			"Headphone Jack",	"HPROUT",
-			"LINE1L",		"Line In",
-			"LINE1R",		"Line In";
-
-		simple-audio-card,dai-link@0 {
-			format = "i2s";
-			bitclock-master = <&sound0_0_master>;
-			frame-master = <&sound0_0_master>;
-			sound0_0_master: cpu {
-				sound-dai = <&mcasp2>;
-				clocks = <&k2g_clks 0x6 1>;
-				system-clock-direction-out;
-			};
-
-			codec {
-				sound-dai = <&tlv320aic3106>;
-				clocks = <&aud_mclk>;
-			};
-		};
-
-		simple-audio-card,dai-link@1 {
-			format = "i2s";
-			bitclock-master = <&sound0_1_master>;
-			frame-master = <&sound0_1_master>;
-			sound0_1_master: cpu {
-				sound-dai = <&mcasp2>;
-				clocks = <&k2g_clks 0x6 1>;
-				system-clock-direction-out;
-			};
-
-			codec {
-				sound-dai = <&sii9022>;
-				clocks = <&aud_mclk>;
-			};
-		};
-	};
-};
-
-&k2g_pinctrl {
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	mmc0_pins: pinmux_mmc0_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x1300) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_dat3.mmc0_dat3 */
-			K2G_CORE_IOPAD(0x1304) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_dat2.mmc0_dat2 */
-			K2G_CORE_IOPAD(0x1308) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_dat1.mmc0_dat1 */
-			K2G_CORE_IOPAD(0x130c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_dat0.mmc0_dat0 */
-			K2G_CORE_IOPAD(0x1310) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_clk.mmc0_clk */
-			K2G_CORE_IOPAD(0x1314) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_cmd.mmc0_cmd */
-			K2G_CORE_IOPAD(0x12ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* mmc0_sdcd.gpio1_12 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x10ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat7.mmc1_dat7 */
-			K2G_CORE_IOPAD(0x10f0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat6.mmc1_dat6 */
-			K2G_CORE_IOPAD(0x10f4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat5.mmc1_dat5 */
-			K2G_CORE_IOPAD(0x10f8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat4.mmc1_dat4 */
-			K2G_CORE_IOPAD(0x10fc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
-			K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
-			K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
-			K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
-			K2G_CORE_IOPAD(0x110c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
-			K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
-			K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
-		>;
-	};
-
-	ecap0_pins: ecap0_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4)	/* pr1_mdio_data.ecap0_in_apwm0_out */
-		>;
-	};
-
-	spi1_pins: pinmux_spi1_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_scs0.spi1_scs0 */
-			K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_clk.spi1_clk */
-			K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_miso.spi1_miso */
-			K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_mosi.spi1_mosi */
-		>;
-	};
-
-	qspi_pins: pinmux_qspi_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
-			K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
-			K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
-			K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
-			K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
-			K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
-			K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x11ec) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)      /* uart2_rxd.uart2_rxd */
-			K2G_CORE_IOPAD(0x11f0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)      /* uart2_txd.uart2_txd */
-		>;
-	};
-
-	dcan0_pins: pinmux_dcan0_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x11fc) (BUFFER_CLASS_B | PULL_DISABLE  | MUX_MODE0)	/* dcan0tx.dcan0tx */
-			K2G_CORE_IOPAD(0x1200) (BUFFER_CLASS_B | PIN_PULLDOWN  | MUX_MODE0)	/* dcan0rx.dcan0rx */
-		>;
-	};
-
-	dcan1_pins: pinmux_dcan1_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x1224) (BUFFER_CLASS_B | PULL_DISABLE  | MUX_MODE1)	/* qspicsn2.dcan1tx */
-			K2G_CORE_IOPAD(0x1228) (BUFFER_CLASS_B | PIN_PULLDOWN  | MUX_MODE1)	/* qspicsn3.dcan1rx */
-		>;
-	};
-
-	emac_pins: pinmux_emac_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD1.RGMII_RXD1 */
-			K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD2.RGMII_RXD2 */
-			K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD3.RGMII_RXD3 */
-			K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD0.RGMII_RXD0 */
-			K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD0.RGMII_TXD0 */
-			K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD1.RGMII_TXD1 */
-			K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD2.RGMII_TXD2 */
-			K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD3.RGMII_TXD3 */
-			K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXCLK.RGMII_TXC */
-			K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXEN.RGMII_TXCTL */
-			K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXCLK.RGMII_RXC */
-			K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXDV.RGMII_RXCTL */
-		>;
-	};
-
-	mdio_pins: pinmux_mdio_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_CLK.MDIO_CLK */
-			K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_DATA.MDIO_DATA */
-		>;
-	};
-
-	vout_pins: pinmux_vout_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x1078) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata23.dssdata23 */
-			K2G_CORE_IOPAD(0x107c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata22.dssdata22 */
-			K2G_CORE_IOPAD(0x1080) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata21.dssdata21 */
-			K2G_CORE_IOPAD(0x1084) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata20.dssdata20 */
-			K2G_CORE_IOPAD(0x1088) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata19.dssdata19 */
-			K2G_CORE_IOPAD(0x108c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata18.dssdata18 */
-			K2G_CORE_IOPAD(0x1090) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata17.dssdata17 */
-			K2G_CORE_IOPAD(0x1094) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata16.dssdata16 */
-			K2G_CORE_IOPAD(0x1098) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata15.dssdata15 */
-			K2G_CORE_IOPAD(0x109c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata14.dssdata14 */
-			K2G_CORE_IOPAD(0x10a0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata13.dssdata13 */
-			K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata12.dssdata12 */
-			K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata11.dssdata11 */
-			K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata10.dssdata10 */
-			K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata9.dssdata9 */
-			K2G_CORE_IOPAD(0x10b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata8.dssdata8 */
-			K2G_CORE_IOPAD(0x10b8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata7.dssdata7 */
-			K2G_CORE_IOPAD(0x10bc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata6.dssdata6 */
-			K2G_CORE_IOPAD(0x10c0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata5.dssdata5 */
-			K2G_CORE_IOPAD(0x10c4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata4.dssdata4 */
-			K2G_CORE_IOPAD(0x10c8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata3.dssdata3 */
-			K2G_CORE_IOPAD(0x10cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata2.dssdata2 */
-			K2G_CORE_IOPAD(0x10d0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata1.dssdata1 */
-			K2G_CORE_IOPAD(0x10d4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata0.dssdata0 */
-			K2G_CORE_IOPAD(0x10d8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssvsync.dssvsync */
-			K2G_CORE_IOPAD(0x10dc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsshsync.dsshsync */
-			K2G_CORE_IOPAD(0x10e0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsspclk.dsspclk */
-			K2G_CORE_IOPAD(0x10e4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssde.dssde */
-			K2G_CORE_IOPAD(0x10e8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssfid.dssfid */
-		>;
-	};
-
-	mcasp2_pins: pinmux_mcasp2_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x1234) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo2.mcasp2_axr2 */
-			K2G_CORE_IOPAD(0x1238) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo3.mcasp2_axr3 */
-			K2G_CORE_IOPAD(0x1254) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo10.mcasp2_afsx */
-			K2G_CORE_IOPAD(0x125c) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo12.mcasp2_aclkx */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	vmmc-supply = <&vcc3v3_dcin_reg>;
-	vqmmc-supply = <&vcc3v3_dcin_reg>;
-	cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */
-	vqmmc-supply = <&vcc1v8_ldo1_reg>;
-	ti,non-removable;
-	status = "okay";
-};
-
-&dsp0 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c1024";
-		reg = <0x50>;
-	};
-};
-
-&keystone_usb0 {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&keystone_usb1 {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins>;
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-	status = "okay";
-
-	spi_nor: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <5000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x100000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "misc";
-			reg = <0x100000 0xf00000>;
-		};
-	};
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_pins>;
-	cdns,rclk-en;
-
-	flash0: flash@0 {
-		compatible = "s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <96000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cdns,read-delay = <5>;
-		cdns,tshsl-ns = <500>;
-		cdns,tsd2d-ns = <500>;
-		cdns,tchsh-ns = <119>;
-		cdns,tslch-ns = <119>;
-
-		partition@0 {
-			label = "QSPI.u-boot-spl-os";
-			reg = <0x00000000 0x00100000>;
-		};
-		partition@1 {
-			label = "QSPI.u-boot-env";
-			reg = <0x00100000 0x00040000>;
-		};
-		partition@2 {
-			label = "QSPI.skern";
-			reg = <0x00140000 0x0040000>;
-		};
-		partition@3 {
-			label = "QSPI.pmmc-firmware";
-			reg = <0x00180000 0x0040000>;
-		};
-		partition@4 {
-			label = "QSPI.kernel";
-			reg = <0x001C0000 0x0800000>;
-		};
-		partition@5 {
-			label = "QSPI.file-system";
-			reg = <0x009C0000 0x3640000>;
-		};
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-&dcan0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan0_pins>;
-	status = "okay";
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-	status = "okay";
-};
-
-&qmss {
-	status = "okay";
-};
-
-&knav_dmas {
-	status = "okay";
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-	status = "okay";
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&gbe0 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-rxid";
-	status = "okay";
-};
-
-&netcp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	status = "okay";
-	clock-frequency = <400000>;
-
-	sii9022: sii9022@3b {
-		#sound-dai-cells = <0>;
-		compatible = "sil,sii9022";
-		reg = <0x3b>;
-
-		sil,i2s-data-lanes = < 0 >;
-		clocks = <&aud_mclk>;
-		clock-names = "mclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				sii9022_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				sii9022_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&vcc3v3_dcin_reg>;
-		IOVDD-supply = <&vcc3v3_dcin_reg>;
-		DRVDD-supply = <&vcc3v3_dcin_reg>;
-		DVDD-supply = <&vcc1v8_ldo2_reg>;
-	};
-};
-
-&dss {
-	pinctrl-names = "default";
-	pinctrl-0 = <&vout_pins>;
-	status = "okay";
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&sii9022_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&mcasp2 {
-	#sound-dai-cells = <0>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp2_pins>;
-
-	assigned-clocks = <&k2g_clks 0x4c 2>, <&k2g_clks 0x6 1>;
-	assigned-clock-parents = <0>, <&k2g_clks 0x6 2>;
-	assigned-clock-rates = <22579200>, <0>;
-
-	status = "okay";
-
-	op-mode = <0>;		/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 6 serializer */
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-		0 0 1 2 0 0 // AXR2: TX, AXR3: rx
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts
deleted file mode 100644
index bd84d7f0f2fe2..0000000000000
--- a/arch/arm/boot/dts/keystone-k2g-ice.dts
+++ /dev/null
@@ -1,447 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for K2G Industrial Communication Engine EVM
- *
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-/dts-v1/;
-
-#include "keystone-k2g.dtsi"
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
-	compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone";
-	model = "Texas Instruments K2G Industrial Communication EVM";
-
-	memory@800000000 {
-		device_type = "memory";
-		reg = <0x00000008 0x00000000 0x00000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		dsp_common_memory: dsp-common-memory@81f800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	vmain: fixedregulator-vmain {
-		compatible = "regulator-fixed";
-		regulator-name = "vmain_fixed";
-		regulator-min-microvolt = <24000000>;
-		regulator-max-microvolt = <24000000>;
-		regulator-always-on;
-	};
-
-	v5_0: fixedregulator-v5_0 {
-		/* TPS54531 */
-		compatible = "regulator-fixed";
-		regulator-name = "v5_0_fixed";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vmain>;
-		regulator-always-on;
-	};
-
-	vdd_3v3: fixedregulator-vdd_3v3 {
-		/* TLV62084 */
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&v5_0>;
-		regulator-always-on;
-	};
-
-	vdd_1v8: fixedregulator-vdd_1v8 {
-		/* TLV62084 */
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_1v8_fixed";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&v5_0>;
-		regulator-always-on;
-	};
-
-	vdds_ddr: fixedregulator-vdds_ddr {
-		/* TLV62080 */
-		compatible = "regulator-fixed";
-		regulator-name = "vdds_ddr_fixed";
-		regulator-min-microvolt = <1350000>;
-		regulator-max-microvolt = <1350000>;
-		vin-supply = <&v5_0>;
-		regulator-always-on;
-	};
-
-	vref_ddr: fixedregulator-vref_ddr {
-		/* LP2996A */
-		compatible = "regulator-fixed";
-		regulator-name = "vref_ddr_fixed";
-		regulator-min-microvolt = <675000>;
-		regulator-max-microvolt = <675000>;
-		vin-supply = <&vdd_3v3>;
-		regulator-always-on;
-	};
-
-	vtt_ddr: fixedregulator-vtt_ddr {
-		/* LP2996A */
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_ddr_fixed";
-		regulator-min-microvolt = <675000>;
-		regulator-max-microvolt = <675000>;
-		vin-supply = <&vdd_3v3>;
-		regulator-always-on;
-	};
-
-	vdd_0v9: fixedregulator-vdd_0v9 {
-		/* TPS62180 */
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_0v9_fixed";
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-		vin-supply = <&v5_0>;
-		regulator-always-on;
-	};
-
-	vddb: fixedregulator-vddb {
-		/* TPS22945 */
-		compatible = "regulator-fixed";
-		regulator-name = "vddb_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio1 53 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	gpio-decoder {
-		compatible = "gpio-decoder";
-		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
-			<&pca9536 2 GPIO_ACTIVE_HIGH>,
-			<&pca9536 1 GPIO_ACTIVE_HIGH>,
-			<&pca9536 0 GPIO_ACTIVE_HIGH>;
-		linux,axis = <0>; /* ABS_X */
-		decoder-max-value = <9>;
-	};
-
-	leds1 {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds>;
-
-		led0 {
-			label = "status0:red:cpu0";
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu0";
-		};
-
-		led1 {
-			label = "status0:green:usr";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "status0:yellow:usr";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "status1:red:mmc0";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-
-		led4 {
-			label = "status1:green:usr";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led5 {
-			label = "status1:yellow:usr";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led6 {
-			label = "status2:red:usr";
-			gpios = <&gpio0 44 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led7 {
-			label = "status2:green:usr";
-			gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led8 {
-			label = "status2:yellow:usr";
-			gpios = <&gpio0 42 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led9 {
-			label = "status3:red:usr";
-			gpios = <&gpio0 41 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led10 {
-			label = "status3:green:usr";
-			gpios = <&gpio0 101 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led11 {
-			label = "status3:yellow:usr";
-			gpios = <&gpio0 102 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led12 {
-			label = "status4:green:heartbeat";
-			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&k2g_pinctrl {
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	qspi_pins: pinmux_qspi_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
-			K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
-			K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
-			K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
-			K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
-			K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
-			K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x10FC) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
-			K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
-			K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
-			K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
-			K2G_CORE_IOPAD(0x110C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
-			K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
-			K2G_CORE_IOPAD(0x1114) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* mmc1_sdcd.gpio0_69 */
-			K2G_CORE_IOPAD(0x1118) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_sdwp.mmc1_sdwp */
-			K2G_CORE_IOPAD(0x111C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_pow.mmc1_pow */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
-			K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
-		>;
-	};
-
-	user_leds: pinmux_user_leds {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x102c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad11.gpio0_11 */
-			K2G_CORE_IOPAD(0x1030) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad12.gpio0_12 */
-			K2G_CORE_IOPAD(0x1034) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad13.gpio0_13 */
-			K2G_CORE_IOPAD(0x1038) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad14.gpio0_14 */
-			K2G_CORE_IOPAD(0x103c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad15.gpio0_15 */
-			K2G_CORE_IOPAD(0x1040) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_clk.gpio0_16 */
-			K2G_CORE_IOPAD(0x104c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_wen.gpio0_19 */
-			K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* dss_data9.gpio0_44 */
-			K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* dss_data10.gpio0_43 */
-			K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* dss_data11.gpio0_42 */
-			K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* dss_data12.gpio0_41 */
-			K2G_CORE_IOPAD(0x11b8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* spi2_scsn0.gpio0_101 */
-			K2G_CORE_IOPAD(0x11bc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* spi2_scsn1.gpio0_102 */
-		>;
-	};
-
-	emac_pins: pinmux_emac_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD1.RGMII_RXD1 */
-			K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD2.RGMII_RXD2 */
-			K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD3.RGMII_RXD3 */
-			K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD0.RGMII_RXD0 */
-			K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD0.RGMII_TXD0 */
-			K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD1.RGMII_TXD1 */
-			K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD2.RGMII_TXD2 */
-			K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD3.RGMII_TXD3 */
-			K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXCLK.RGMII_TXC */
-			K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXEN.RGMII_TXCTL */
-			K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXCLK.RGMII_RXC */
-			K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXDV.RGMII_RXCTL */
-		>;
-	};
-
-	mdio_pins: pinmux_mdio_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_CLK.MDIO_CLK */
-			K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_DATA.MDIO_DATA */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&dsp0 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_pins>;
-	cdns,rclk-en;
-	status = "okay";
-
-	flash0: flash@0 {
-		compatible = "s25fl256s1", "jedec,spi-nor";
-		reg = <0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <96000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cdns,read-delay = <5>;
-		cdns,tshsl-ns = <500>;
-		cdns,tsd2d-ns = <500>;
-		cdns,tchsh-ns = <119>;
-		cdns,tslch-ns = <119>;
-
-		partition@0 {
-			label = "QSPI.u-boot";
-			reg = <0x00000000 0x00100000>;
-		};
-		partition@1 {
-			label = "QSPI.u-boot-env";
-			reg = <0x00100000 0x00040000>;
-		};
-		partition@2 {
-			label = "QSPI.skern";
-			reg = <0x00140000 0x0040000>;
-		};
-		partition@3 {
-			label = "QSPI.pmmc-firmware";
-			reg = <0x00180000 0x0040000>;
-		};
-		partition@4 {
-			label = "QSPI.kernel";
-			reg = <0x001c0000 0x0800000>;
-		};
-		partition@5 {
-			label = "QSPI.u-boot-spl-os";
-			reg = <0x009c0000 0x0040000>;
-		};
-		partition@6 {
-			label = "QSPI.file-system";
-			reg = <0x00a00000 0x1600000>;
-		};
-	};
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vdd_3v3>;
-	cd-gpios = <&gpio0 69 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	status = "okay";
-	clock-frequency = <400000>;
-
-	pca9536: gpio@41 {
-		compatible = "ti,pca9536";
-		reg = <0x41>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		vcc-supply = <&vdd_3v3>;
-	};
-};
-
-&qmss {
-	status = "okay";
-};
-
-&knav_dmas {
-	status = "okay";
-};
-
-&netcp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins>;
-	status = "okay";
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-	status = "okay";
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-impedance;
-		ti,dp83867-rxctrl-strap-quirk;
-	};
-};
-
-&gbe0 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi
deleted file mode 100644
index f6306933ff426..0000000000000
--- a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for K2G Netcp driver
- *
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-qmss: qmss@4020000 {
-	compatible = "ti,66ak2g-navss-qm";
-	dma-coherent;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	power-domains = <&k2g_pds 0x0018>;
-	clocks = <&k2g_clks 0x0018 0>;
-	clock-names = "nss_vclk";
-	ranges;
-	queue-range = <0 0x80>;
-	linkram0 = <0x4020000 0x7ff>;
-	status = "disabled";
-
-	qmgrs {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		qmgr0 {
-			managed-queues = <0 0x80>;
-			reg = <0x4100000 0x800>,
-			      <0x4040000 0x100>,
-			      <0x4080000 0x800>,
-			      <0x40c0000 0x800>;
-			reg-names = "peek", "config",
-				    "region", "push";
-		};
-
-	};
-	queue-pools {
-		qpend {
-			qpend-0 {
-				qrange = <77 8>;
-				interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04
-					     0 311 0xf04 0 312 0xf04 0 313 0xf04
-					     0 314 0xf04 0 315 0xf04>;
-				qalloc-by-id;
-			};
-		};
-		general-purpose {
-			gp-0 {
-				qrange = <112 8>;
-			};
-			netcp-tx {
-				qrange = <5 8>;
-				qalloc-by-id;
-			};
-		};
-	};
-
-	descriptor-regions {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		region-12 {
-			id = <12>;
-			region-spec = <1023 128>; /* num_desc desc_size */
-			link-index = <0x400>;
-		};
-	};
-}; /* qmss */
-
-knav_dmas: knav_dmas@0 {
-	compatible = "ti,keystone-navigator-dma";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	status = "disabled";
-	power-domains = <&k2g_pds 0x0018>;
-	clocks = <&k2g_clks 0x0018 0>;
-	clock-names = "nss_vclk";
-	ranges;
-	ti,navigator-cloud-address = <0x40c0000 0x40c0000 0x40c0000 0x40c0000>;
-
-	dma_gbe: dma_gbe@0 {
-		reg = <0x4010000 0x100>,
-		      <0x4011000 0x2a0>, /* 21 Tx channels */
-		      <0x4012000 0x400>, /* 32 Rx channels */
-		      <0x4010100 0x80>,
-		      <0x4013000 0x400>; /* 32 Rx flows */
-		reg-names = "global", "txchan", "rxchan",
-			    "txsched", "rxflow";
-	};
-
-};
-
-netcp: netcp@4000000 {
-	reg = <0x2620110 0x8>;
-	reg-names = "efuse";
-	compatible = "ti,netcp-1.0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	status = "disabled";
-	power-domains = <&k2g_pds 0x0018>;
-	clocks = <&k2g_clks 0x0018 3>, <&k2g_clks 0x0018 8>;
-	clock-names = "ethss_clk", "cpts";
-
-	/* NetCP address range */
-	ranges = <0 0x4000000 0x1000000>;
-
-	dma-coherent;
-
-	ti,navigator-dmas = <&dma_gbe 0>, <&dma_gbe 5>;
-	ti,navigator-dma-names = "netrx0", "nettx";
-
-	netcp-devices {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		gbe: gbe@200000 {
-			label = "netcp-gbe";
-			compatible = "ti,netcp-gbe-2";
-			reg = <0x200000 0x20>, <0x220000 0x20000>;
-			enable-ale;
-			tx-queue = <5>;
-			tx-channel = "nettx";
-			cpts-rftclk-sel = <0>;
-			cpts-ext-ts-inputs = <8>;
-
-			interfaces {
-				gbe0: interface-0 {
-					slave-port = <0>;
-					link-interface = <5>;
-				};
-			};
-		};
-	};
-
-	netcp-interfaces {
-		interface-0 {
-			rx-channel = "netrx0";
-			rx-pool = <512 12>;
-			tx-pool = <511 12>;
-			rx-queue-depth = <128 128 0 0>;
-			rx-buffer-size = <1518 4096 0 0>;
-			rx-queue = <77>;
-			tx-completion-queue = <78>;
-			efuse-mac = <1>;
-			netcp-gbe = <&gbe0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
deleted file mode 100644
index 380dd9d637eef..0000000000000
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ /dev/null
@@ -1,644 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for K2G SOC
- *
- * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/keystone.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "ti,k2g","ti,keystone";
-	model = "Texas Instruments K2G SoC";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&gic>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		rproc0 = &dsp0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	gic: interrupt-controller@2561000 {
-		compatible = "arm,gic-400", "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x0 0x02561000 0x0 0x1000>,
-		      <0x0 0x02562000 0x0 0x2000>,
-		      <0x0 0x02564000 0x0 0x2000>,
-		      <0x0 0x02566000 0x0 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-				IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts =
-			<GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
-	};
-
-	usbphy {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		usb0_phy: usb-phy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			status = "disabled";
-		};
-
-		usb1_phy: usb-phy@1 {
-			compatible = "usb-nop-xceiv";
-			reg = <1>;
-			status = "disabled";
-		};
-	};
-
-	soc0: soc@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#pinctrl-cells = <1>;
-		compatible = "ti,keystone","simple-bus";
-		ranges = <0x0 0x0 0x0 0xc0000000>;
-		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
-
-		msm_ram: sram@c000000 {
-			compatible = "mmio-sram";
-			reg = <0x0c000000 0x100000>;
-			ranges = <0x0 0x0c000000 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			bm-sram@f7000 {
-				reg = <0x000f7000 0x8000>;
-			};
-		};
-
-		k2g_pinctrl: pinmux@2621000 {
-			compatible = "pinctrl-single";
-			reg = <0x02621000 0x410>;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0x001b0007>;
-		};
-
-		devctrl: device-state-control@2620000 {
-			compatible = "ti,keystone-devctrl", "syscon", "simple-mfd";
-			reg = <0x02620000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x02620000 0x1000>;
-
-			kirq0: keystone_irq@2a0 {
-				compatible = "ti,keystone-irq";
-				reg = <0x2a0 0x10>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				ti,syscon-dev = <&devctrl 0x2a0>;
-			};
-
-			dspgpio0: keystone_dsp_gpio@240 {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x240 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x240>;
-			};
-		};
-
-		uart0: serial@2530c00 {
-			compatible = "ti,da830-uart", "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02530c00 0x100>;
-			interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&k2g_clks 0x2c 0>;
-			power-domains = <&k2g_pds 0x2c>;
-			status = "disabled";
-		};
-
-		uart1: serial@2531000 {
-			compatible = "ti,da830-uart", "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02531000 0x100>;
-			interrupts = <GIC_SPI 165 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&k2g_clks 0x2d 0>;
-			power-domains = <&k2g_pds 0x2d>;
-			status = "disabled";
-		};
-
-		uart2: serial@2531400 {
-			compatible = "ti,da830-uart", "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02531400 0x100>;
-			interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&k2g_clks 0x2e 0>;
-			power-domains = <&k2g_pds 0x2e>;
-			status = "disabled";
-		};
-
-		dcan0: can@260b200 {
-			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
-			reg = <0x0260B200 0x200>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
-			status = "disabled";
-			power-domains = <&k2g_pds 0x0008>;
-			clocks = <&k2g_clks 0x0008 1>;
-		};
-
-		dcan1: can@260b400 {
-			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
-			reg = <0x0260B400 0x200>;
-			interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-			status = "disabled";
-			power-domains = <&k2g_pds 0x0009>;
-			clocks = <&k2g_clks 0x0009 1>;
-		};
-
-		i2c0: i2c@2530000 {
-			compatible = "ti,keystone-i2c";
-			reg = <0x02530000 0x400>;
-			clocks = <&k2g_clks 0x003a 0>;
-			power-domains = <&k2g_pds 0x003a>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@2530400 {
-			compatible = "ti,keystone-i2c";
-			reg = <0x02530400 0x400>;
-			clocks = <&k2g_clks 0x003b 0>;
-			power-domains = <&k2g_pds 0x003b>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@2530800 {
-			compatible = "ti,keystone-i2c";
-			reg = <0x02530800 0x400>;
-			clocks = <&k2g_clks 0x003c 0>;
-			power-domains = <&k2g_pds 0x003c>;
-			interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		dsp0: dsp@10800000 {
-			compatible = "ti,k2g-dsp";
-			reg = <0x10800000 0x00100000>,
-			      <0x10e00000 0x00008000>,
-			      <0x10f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			power-domains = <&k2g_pds 0x0046>;
-			ti,syscon-dev = <&devctrl 0x844>;
-			resets = <&k2g_reset 0x0046 0x1>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <0 8>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio0 27 0>;
-			status = "disabled";
-		};
-
-		msgmgr: mailbox@2a00000 {
-			compatible = "ti,k2g-message-manager";
-			#mbox-cells = <2>;
-			reg-names = "queue_proxy_region",
-				    "queue_state_debug_region";
-			reg = <0x02a00000 0x400000>, <0x028c3400 0x400>;
-			interrupt-names = "rx_005",
-					  "rx_057";
-			interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pmmc: system-controller@2921c00 {
-			compatible = "ti,k2g-sci";
-			/*
-			 * In case of rare platforms that does not use k2g as
-			 * system master, use /delete-property/
-			 */
-			ti,system-reboot-controller;
-			mbox-names = "rx", "tx";
-			mboxes = <&msgmgr 5 2>,
-				<&msgmgr 0 0>;
-			reg-names = "debug_messages";
-			reg = <0x02921c00 0x400>;
-
-			k2g_pds: power-controller {
-				compatible = "ti,sci-pm-domain";
-				#power-domain-cells = <1>;
-			};
-
-			k2g_clks: clock-controller {
-				compatible = "ti,k2g-sci-clk";
-				#clock-cells = <2>;
-			};
-
-			k2g_reset: reset-controller {
-				compatible = "ti,sci-reset";
-				#reset-cells = <2>;
-			};
-		};
-
-		gpio0: gpio@2603000 {
-			compatible = "ti,k2g-gpio", "ti,keystone-gpio";
-			reg = <0x02603000 0x100>;
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,ngpio = <144>;
-			ti,davinci-gpio-unbanked = <0>;
-			clocks = <&k2g_clks 0x001b 0x0>;
-			clock-names = "gpio";
-		};
-
-		gpio1: gpio@260a000 {
-			compatible = "ti,k2g-gpio", "ti,keystone-gpio";
-			reg = <0x0260a000 0x100>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 443 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 444 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 445 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 446 IRQ_TYPE_EDGE_RISING>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,ngpio = <68>;
-			ti,davinci-gpio-unbanked = <0>;
-			clocks = <&k2g_clks 0x001c 0x0>;
-			clock-names = "gpio";
-		};
-
-		dss: dss@02540000 {
-			compatible = "ti,k2g-dss";
-			reg = <0x02540000 0x400>,
-				<0x02550000 0x1000>,
-				<0x02557000 0x1000>,
-				<0x0255a800 0x100>,
-				<0x0255ac00 0x100>;
-			reg-names = "cfg", "common", "vid1", "ovr1", "vp1";
-			clocks = <&k2g_clks 0x2 0>,
-					<&k2g_clks 0x2 1>;
-			clock-names = "fck", "vp1";
-			interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>;
-
-			power-domains = <&k2g_pds 0x2>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			max-memory-bandwidth = <230000000>;
-		};
-
-		edma0: edma@2700000 {
-			compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
-			reg = <0x02700000 0x8000>;
-			reg-names = "edma3_cc";
-			interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 216 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "edma3_ccint", "emda3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
-
-			ti,edma-memcpy-channels = <32 33 34 35>;
-
-			power-domains = <&k2g_pds 0x3f>;
-		};
-
-		edma0_tptc0: tptc@2760000 {
-			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
-			reg = <0x02760000 0x400>;
-			power-domains = <&k2g_pds 0x3f>;
-		};
-
-		edma0_tptc1: tptc@2768000 {
-			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
-			reg = <0x02768000 0x400>;
-			power-domains = <&k2g_pds 0x3f>;
-		};
-
-		edma1: edma@2728000 {
-			compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
-			reg = <0x02728000 0x8000>;
-			reg-names = "edma3_cc";
-			interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 220 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "edma3_ccint", "emda3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>;
-
-			/*
-			 * memcpy is disabled, can be enabled with:
-			 * ti,edma-memcpy-channels = <12 13 14 15>;
-			 * for example.
-			 */
-
-			power-domains = <&k2g_pds 0x4f>;
-		};
-
-		edma1_tptc0: tptc@27b0000 {
-			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
-			reg = <0x027b0000 0x400>;
-			power-domains = <&k2g_pds 0x4f>;
-		};
-
-		edma1_tptc1: tptc@27b8000 {
-			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
-			reg = <0x027b8000 0x400>;
-			power-domains = <&k2g_pds 0x4f>;
-		};
-
-		mmc0: mmc@23000000 {
-			compatible = "ti,k2g-sdhci";
-			reg = <0x23000000 0x400>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
-			bus-width = <4>;
-			no-1-8-v;
-			max-frequency = <96000000>;
-			power-domains = <&k2g_pds 0xb>;
-			clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
-			clock-names = "fck", "mmchsdb_fck";
-			status = "disabled";
-		};
-
-		mmc1: mmc@23100000 {
-			compatible = "ti,k2g-sdhci";
-			reg = <0x23100000 0x400>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
-			bus-width = <8>;
-			no-1-8-v;
-			non-removable;
-			max-frequency = <96000000>;
-			power-domains = <&k2g_pds 0xc>;
-			clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
-			clock-names = "fck", "mmchsdb_fck";
-		};
-
-		qspi: spi@2940000 {
-			compatible = "ti,k2g-qspi", "cdns,qspi-nor";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x02940000 0x1000>,
-			      <0x24000000 0x4000000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
-			cdns,fifo-depth = <256>;
-			cdns,fifo-width = <4>;
-			cdns,trigger-address = <0x24000000>;
-			clocks = <&k2g_clks 0x43 0x0>;
-			power-domains = <&k2g_pds 0x43>;
-			status = "disabled";
-		};
-
-		mcasp0: mcasp@2340000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			reg = <0x02340000 0x2000>,
-			      <0x21804000 0x1000>;
-			reg-names = "mpu","dat";
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			dmas = <&edma0 24 1>, <&edma0 25 1>;
-			dma-names = "tx", "rx";
-			power-domains = <&k2g_pds 0x4>;
-			clocks = <&k2g_clks 0x4 0>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		mcasp1: mcasp@2342000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			reg = <0x02342000 0x2000>,
-			      <0x21804400 0x1000>;
-			reg-names = "mpu","dat";
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			dmas = <&edma1 48 1>, <&edma1 49 1>;
-			dma-names = "tx", "rx";
-			power-domains = <&k2g_pds 0x5>;
-			clocks = <&k2g_clks 0x5 0>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		mcasp2: mcasp@2344000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			reg = <0x02344000 0x2000>,
-			      <0x21804800 0x1000>;
-			reg-names = "mpu","dat";
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			dmas = <&edma1 50 1>, <&edma1 51 1>;
-			dma-names = "tx", "rx";
-			power-domains = <&k2g_pds 0x6>;
-			clocks = <&k2g_clks 0x6 0>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		keystone_usb0: keystone-dwc3@2680000 {
-			compatible = "ti,keystone-dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x2680000 0x10000>;
-			interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
-			ranges;
-			dma-coherent;
-			dma-ranges;
-			status = "disabled";
-			power-domains = <&k2g_pds 0x0016>;
-
-			usb0: usb@2690000 {
-				compatible = "snps,dwc3";
-				reg = <0x2690000 0x10000>;
-				interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				usb-phy = <&usb0_phy>;
-				status = "disabled";
-			};
-		};
-
-		keystone_usb1: keystone-dwc3@2580000 {
-			compatible = "ti,keystone-dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x2580000 0x10000>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
-			ranges;
-			dma-coherent;
-			dma-ranges;
-			status = "disabled";
-			power-domains = <&k2g_pds 0x0017>;
-
-			usb1: usb@2590000 {
-				compatible = "snps,dwc3";
-				reg = <0x2590000 0x10000>;
-				interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				usb-phy = <&usb1_phy>;
-				status = "disabled";
-			};
-		};
-
-		ecap0: pwm@21d1800 {
-			compatible = "ti,k2g-ecap", "ti,am3352-ecap";
-			#pwm-cells = <3>;
-			reg = <0x021d1800 0x60>;
-			power-domains = <&k2g_pds 0x38>;
-			clocks = <&k2g_clks 0x38 0>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		ecap1: pwm@21d1c00 {
-			compatible = "ti,k2g-ecap", "ti,am3352-ecap";
-			#pwm-cells = <3>;
-			reg = <0x021d1c00 0x60>;
-			power-domains = <&k2g_pds 0x39>;
-			clocks = <&k2g_clks 0x39 0x0>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		spi0: spi@21805400 {
-			compatible = "ti,keystone-spi";
-			reg = <0x21805400 0x200>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <0>;
-			interrupts = <GIC_SPI 64 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			power-domains = <&k2g_pds 0x0010>;
-			clocks = <&k2g_clks 0x0010 0>;
-		};
-
-		spi1: spi@21805800 {
-			compatible = "ti,keystone-spi";
-			reg = <0x21805800 0x200>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <0>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			power-domains = <&k2g_pds 0x0011>;
-			clocks = <&k2g_clks 0x0011 0>;
-		};
-
-		spi2: spi@21805c00 {
-			compatible = "ti,keystone-spi";
-			reg = <0x21805C00 0x200>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <0>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			power-domains = <&k2g_pds 0x0012>;
-			clocks = <&k2g_clks 0x0012 0>;
-		};
-
-		spi3: spi@21806000 {
-			compatible = "ti,keystone-spi";
-			reg = <0x21806000 0x200>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <0>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			power-domains = <&k2g_pds 0x0013>;
-			clocks = <&k2g_clks 0x0013 0>;
-		};
-
-		wdt: wdt@02250000 {
-			compatible = "ti,keystone-wdt", "ti,davinci-wdt";
-			reg = <0x02250000 0x80>;
-			power-domains = <&k2g_pds 0x22>;
-			clocks = <&k2g_clks 0x22 0>;
-		};
-
-		emif: emif@21010000 {
-			compatible = "ti,emif-keystone";
-			reg = <0x21010000 0x200>;
-			interrupts = <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		mdio: mdio@4200f00 {
-			compatible = "ti,keystone_mdio", "ti,davinci_mdio";
-			reg = <0x04200f00 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&k2g_clks 0x0018 3>;
-			clock-names = "fck";
-			power-domains = <&k2g_pds 0x0018>;
-			status = "disabled";
-			bus_freq = <2500000>;
-		};
-		#include "keystone-k2g-netcp.dtsi"
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi b/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi
deleted file mode 100644
index 4ba6912176ef1..0000000000000
--- a/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi
+++ /dev/null
@@ -1,422 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Kepler/Hawking SoC clock nodes
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-clocks {
-	armpllclk: armpllclk@2620370 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkarm>;
-		clock-output-names = "arm-pll-clk";
-		reg = <0x02620370 4>;
-		reg-names = "control";
-	};
-
-	mainpllclk: mainpllclk@2310110 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
-		reg-names = "control", "multiplier", "post-divider";
-	};
-
-	papllclk: papllclk@2620358 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkpass>;
-		clock-output-names = "papllclk";
-		reg = <0x02620358 4>;
-		reg-names = "control";
-	};
-
-	ddr3apllclk: ddr3apllclk@2620360 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkddr3a>;
-		clock-output-names = "ddr-3a-pll-clk";
-		reg = <0x02620360 4>;
-		reg-names = "control";
-	};
-
-	ddr3bpllclk: ddr3bpllclk@2620368 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkddr3b>;
-		clock-output-names = "ddr-3b-pll-clk";
-		reg = <0x02620368 4>;
-		reg-names = "control";
-	};
-
-	clktsip: clktsip@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "tsip";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clksrio: clksrio@235002c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1rstiso13>;
-		clock-output-names = "srio";
-		reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <4>;
-	};
-
-	clkhyperlink0: clkhyperlink0@2350030 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "hyperlink-0";
-		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <5>;
-	};
-
-	clkgem1: clkgem1@2350040 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem1";
-		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <9>;
-	};
-
-	clkgem2: clkgem2@2350044 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem2";
-		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <10>;
-	};
-
-	clkgem3: clkgem3@2350048 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem3";
-		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <11>;
-	};
-
-	clkgem4: clkgem4@235004c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem4";
-		reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <12>;
-	};
-
-	clkgem5: clkgem5@2350050 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem5";
-		reg = <0x02350050 0xb00>, <0x02350034 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <13>;
-	};
-
-	clkgem6: clkgem6@2350054 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem6";
-		reg = <0x02350054 0xb00>, <0x02350038 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <14>;
-	};
-
-	clkgem7: clkgem7@2350058 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem7";
-		reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <15>;
-	};
-
-	clkddr31: clkddr31@2350060 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "ddr3-1";
-		reg = <0x02350060 0xb00>, <0x02350040 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <16>;
-	};
-
-	clktac: clktac@2350064 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tac";
-		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkrac01: clkrac01@2350068 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "rac-01";
-		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkrac23: clkrac23@235006c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "rac-23";
-		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <18>;
-	};
-
-	clkfftc0: clkfftc0@2350070 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-0";
-		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <19>;
-	};
-
-	clkfftc1: clkfftc1@2350074 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-1";
-		reg = <0x02350074 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <19>;
-	};
-
-	clkfftc2: clkfftc2@2350078 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-2";
-		reg = <0x02350078 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkfftc3: clkfftc3@235007c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-3";
-		reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkfftc4: clkfftc4@2350080 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-4";
-		reg = <0x02350080 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkfftc5: clkfftc5@2350084 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-5";
-		reg = <0x02350084 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkaif: clkaif@2350088 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "aif";
-		reg = <0x02350088 0xb00>, <0x02350054 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <21>;
-	};
-
-	clktcp3d0: clktcp3d0@235008c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-0";
-		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <22>;
-	};
-
-	clktcp3d1: clktcp3d1@2350090 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-1";
-		reg = <0x02350090 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <22>;
-	};
-
-	clktcp3d2: clktcp3d2@2350094 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-2";
-		reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <23>;
-	};
-
-	clktcp3d3: clktcp3d3@2350098 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-3";
-		reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <23>;
-	};
-
-	clkvcp0: clkvcp0@235009c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-0";
-		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp1: clkvcp1@23500a0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-1";
-		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp2: clkvcp2@23500a4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-2";
-		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp3: clkvcp3@23500a8 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-3";
-		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp4: clkvcp4@23500ac {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-4";
-		reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkvcp5: clkvcp5@23500b0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-5";
-		reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkvcp6: clkvcp6@23500b4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-6";
-		reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkvcp7: clkvcp7@23500b8 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-7";
-		reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkbcp: clkbcp@23500bc {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "bcp";
-		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <26>;
-	};
-
-	clkdxb: clkdxb@23500c0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "dxb";
-		reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <27>;
-	};
-
-	clkhyperlink1: clkhyperlink1@23500c4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "hyperlink-1";
-		reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <28>;
-	};
-
-	clkxge: clkxge@23500c8 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "xge";
-		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <29>;
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
deleted file mode 100644
index 1f762af6f5022..0000000000000
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ /dev/null
@@ -1,236 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Kepler/Hawking EVM device tree
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "keystone-k2hk.dtsi"
-
-/ {
-	compatible =  "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
-	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		dsp_common_memory: dsp-common-memory@81f800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-debug-1-1 {
-			label = "keystone:green:debug1";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
-		};
-
-		led-debug-1-2 {
-			label = "keystone:red:debug1";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
-		};
-
-		led-debug-2 {
-			label = "keystone:blue:debug2";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
-		};
-
-		led-debug-3 {
-			label = "keystone:blue:debug3";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
-		};
-	};
-};
-
-&soc0 {
-		clocks {
-			refclksys: refclksys {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <122880000>;
-				clock-output-names = "refclk-sys";
-			};
-
-			refclkpass: refclkpass {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <122880000>;
-				clock-output-names = "refclk-pass";
-			};
-
-			refclkarm: refclkarm {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <125000000>;
-				clock-output-names = "refclk-arm";
-			};
-
-			refclkddr3a: refclkddr3a {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-ddr3a";
-			};
-
-			refclkddr3b: refclkddr3b {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-ddr3b";
-			};
-		};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&keystone_usb0 {
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "host";
-};
-
-&aemif {
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <0>;
-		/* all timings in nanoseconds */
-		ti,cs-min-turnaround-ns = <12>;
-		ti,cs-read-hold-ns = <6>;
-		ti,cs-read-strobe-ns = <23>;
-		ti,cs-read-setup-ns = <9>;
-		ti,cs-write-hold-ns = <8>;
-		ti,cs-write-strobe-ns = <23>;
-		ti,cs-write-setup-ns = <8>;
-
-		nand@0,0 {
-			compatible = "ti,keystone-nand","ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0 0x4000000
-			       1 0 0x0000100>;
-
-			ti,davinci-chipselect = <0>;
-			ti,davinci-mask-ale = <0x2000>;
-			ti,davinci-mask-cle = <0x4000>;
-			ti,davinci-mask-chipsel = <0>;
-			nand-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			nand-on-flash-bbt;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "params";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "ubifs";
-				reg = <0x180000 0x1fe80000>;
-			};
-		};
-	};
-};
-
-&i2c0 {
-	dtt@50 {
-		compatible = "atmel,24c1024";
-		reg = <0x50>;
-	};
-};
-
-&spi0 {
-	nor_flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		spi-max-frequency = <54000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "misc";
-			reg = <0x80000 0xf80000>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-	ethphy0: ethernet-phy@0 {
-		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&dsp0 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
-
-&dsp1 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
-
-&dsp2 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
-
-&dsp3 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
-
-&dsp4 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
-
-&dsp5 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
-
-&dsp6 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
-
-&dsp7 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
deleted file mode 100644
index 8a421c65f9209..0000000000000
--- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Keystone 2 Hawking Netcp driver
- *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-qmss: qmss@2a40000 {
-	compatible = "ti,keystone-navigator-qmss";
-	dma-coherent;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	clocks = <&chipclk13>;
-	ranges;
-	queue-range = <0 0x4000>;
-	linkram0 = <0x100000 0x8000>;
-	linkram1 = <0x0 0x10000>;
-
-	qmgrs {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		qmgr0 {
-			managed-queues = <0 0x2000>;
-			reg = <0x2a40000 0x20000>,
-			      <0x2a06000 0x400>,
-			      <0x2a02000 0x1000>,
-			      <0x2a03000 0x1000>,
-			      <0x23a80000 0x20000>,
-			      <0x2a80000 0x20000>;
-			reg-names = "peek", "status", "config",
-				    "region", "push", "pop";
-		};
-
-		qmgr1 {
-			managed-queues = <0x2000 0x2000>;
-			reg = <0x2a60000 0x20000>,
-			      <0x2a06400 0x400>,
-			      <0x2a04000 0x1000>,
-			      <0x2a05000 0x1000>,
-			      <0x23aa0000 0x20000>,
-			      <0x2aa0000 0x20000>;
-			reg-names = "peek", "status", "config",
-				    "region", "push", "pop";
-		};
-	};
-
-	queue-pools {
-		qpend {
-			qpend-0 {
-				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
-			};
-			qpend-1 {
-				qrange = <8704 16>;
-				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
-					      0 51 0xf04 0 52 0xf04 0 53 0xf04
-					      0 54 0xf04 0 55 0xf04 0 56 0xf04
-					      0 57 0xf04 0 58 0xf04 0 59 0xf04
-					      0 60 0xf04 0 61 0xf04 0 62 0xf04
-					      0 63 0xf04>;
-				qalloc-by-id;
-			};
-			qpend-2 {
-				qrange = <8720 16>;
-				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
-					      0 59 0xf04 0 68 0xf04 0 69 0xf04
-					      0 70 0xf04 0 71 0xf04 0 72 0xf04
-					      0 73 0xf04 0 74 0xf04 0 75 0xf04
-					      0 76 0xf04 0 77 0xf04 0 78 0xf04
-					      0 79 0xf04>;
-			};
-		};
-		general-purpose {
-			gp-0 {
-				qrange = <4000 64>;
-			};
-			netcp-tx {
-				qrange = <640 9>;
-				qalloc-by-id;
-			};
-			netcpx-tx {
-				qrange = <8752 8>;
-				qalloc-by-id;
-			};
-		};
-		accumulator {
-			acc-low-0 {
-				qrange = <480 32>;
-				accumulator = <0 47 16 2 50>;
-				interrupts = <0 226 0xf01>;
-				multi-queue;
-				qalloc-by-id;
-			};
-		};
-	};
-
-	descriptor-regions {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		region-12 {
-			id = <12>;
-			region-spec = <8192 128>;	/* num_desc desc_size */
-			link-index = <0x4000>;
-		};
-	};
-
-	pdsps {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		pdsp0@2a10000 {
-			reg = <0x2a10000 0x1000    /*iram */
-			       0x2a0f000 0x100     /*reg*/
-			       0x2a0c000 0x3c8	   /*intd */
-			       0x2a20000 0x4000>;  /*cmd*/
-			id = <0>;
-		};
-	};
-}; /* qmss */
-
-knav_dmas: knav_dmas@0 {
-	compatible = "ti,keystone-navigator-dma";
-	clocks = <&papllclk>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	ti,navigator-cloud-address = <0x23a80000 0x23a90000
-				   0x23aa0000 0x23ab0000>;
-
-	dma_gbe: dma_gbe@0 {
-		reg = <0x2004000 0x100>,
-			  <0x2004400 0x120>,
-			  <0x2004800 0x300>,
-			  <0x2004c00 0x120>,
-			  <0x2005000 0x400>;
-		reg-names = "global", "txchan", "rxchan",
-				"txsched", "rxflow";
-	};
-};
-
-netcp: netcp@2000000 {
-	reg = <0x2620110 0x8>;
-	reg-names = "efuse";
-	compatible = "ti,netcp-1.0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	/* NetCP address range */
-	ranges = <0 0x2000000 0x100000>;
-
-	clocks = <&clkpa>, <&clkcpgmac>;
-	clock-names = "pa_clk", "ethss_clk";
-	dma-coherent;
-
-	ti,navigator-dmas = <&dma_gbe 22>,
-			<&dma_gbe 23>,
-			<&dma_gbe 8>;
-	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
-
-	netcp-devices {
-		ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		gbe@90000 { /* ETHSS */
-			#address-cells = <1>;
-			#size-cells = <1>;
-			label = "netcp-gbe";
-			compatible = "ti,netcp-gbe";
-			reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>;
-			/* enable-ale; */
-			tx-queue = <648>;
-			tx-channel = "nettx";
-
-			cpts {
-				clocks = <&cpts_refclk_mux>;
-				clock-names = "cpts";
-
-				cpts_refclk_mux: cpts-refclk-mux {
-					#clock-cells = <0>;
-					clocks = <&chipclk12>, <&chipclk13>,
-						 <&timi0>, <&timi1>,
-						 <&tsrefclk>;
-					ti,mux-tbl = <0x0>, <0x1>, <0x2>,
-						<0x3>, <0x8>;
-					assigned-clocks = <&cpts_refclk_mux>;
-					assigned-clock-parents = <&chipclk12>;
-				};
-			};
-
-			interfaces {
-				gbe0: interface-0 {
-					slave-port = <0>;
-					link-interface = <1>;
-					phy-handle = <&ethphy0>;
-				};
-				gbe1: interface-1 {
-					slave-port = <1>;
-					link-interface = <1>;
-					phy-handle = <&ethphy1>;
-				};
-			};
-
-			secondary-slave-ports {
-				port-2 {
-					slave-port = <2>;
-					link-interface = <2>;
-				};
-				port-3 {
-					slave-port = <3>;
-					link-interface = <2>;
-				};
-			};
-		};
-	};
-
-	netcp-interfaces {
-		interface-0 {
-			rx-channel = "netrx0";
-			rx-pool = <1024 12>;
-			tx-pool = <1024 12>;
-			rx-queue-depth = <128 128 0 0>;
-			rx-buffer-size = <1518 4096 0 0>;
-			rx-queue = <8704>;
-			tx-completion-queue = <8706>;
-			efuse-mac = <1>;
-			netcp-gbe = <&gbe0>;
-
-		};
-		interface-1 {
-			rx-channel = "netrx1";
-			rx-pool = <1024 12>;
-			tx-pool = <1024 12>;
-			rx-queue-depth = <128 128 0 0>;
-			rx-buffer-size = <1518 4096 0 0>;
-			rx-queue = <8705>;
-			tx-completion-queue = <8707>;
-			efuse-mac = <0>;
-			local-mac-address = [02 18 31 7e 3e 6f];
-			netcp-gbe = <&gbe1>;
-		};
-	};
-};
-
-sa_subsys: subsys@20c0000 {
-	compatible = "simple-bus";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 0x20c0000 0x40000>;
-
-	sa_config: subsys@0 {
-		compatible = "syscon";
-		reg = <0x0 0x100>;
-	};
-
-	rng@24000 {
-		compatible = "ti,keystone-rng";
-		reg = <0x24000 0x1000>;
-		ti,syscon-sa-cfg = <&sa_config>;
-		clocks = <&clksa>;
-		clock-names = "fck";
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
deleted file mode 100644
index da6d3934c2e88..0000000000000
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ /dev/null
@@ -1,295 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Kepler/Hawking soc specific device tree
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include <dt-bindings/reset/ti-syscon.h>
-
-/ {
-	compatible = "ti,k2hk", "ti,keystone";
-	model = "Texas Instruments Keystone 2 Kepler/Hawking SoC";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gic>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <3>;
-		};
-	};
-
-	aliases {
-		rproc0 = &dsp0;
-		rproc1 = &dsp1;
-		rproc2 = &dsp2;
-		rproc3 = &dsp3;
-		rproc4 = &dsp4;
-		rproc5 = &dsp5;
-		rproc6 = &dsp6;
-		rproc7 = &dsp7;
-	};
-};
-
-&soc0 {
-		/include/ "keystone-k2hk-clocks.dtsi"
-
-		msm_ram: sram@c000000 {
-			compatible = "mmio-sram";
-			reg = <0x0c000000 0x600000>;
-			ranges = <0x0 0x0c000000 0x600000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			bm-sram@5f0000 {
-				reg = <0x5f0000 0x8000>;
-			};
-		};
-
-		psc: power-sleep-controller@2350000 {
-			pscrst: reset-controller {
-				compatible = "ti,k2hk-pscrst", "ti,syscon-reset";
-				#reset-cells = <1>;
-
-				ti,reset-bits = <
-					0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
-					0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */
-					0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */
-					0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */
-					0xa4c 8 0xa4c 8 0x84c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 4: dsp4 */
-					0xa50 8 0xa50 8 0x850 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 5: dsp5 */
-					0xa54 8 0xa54 8 0x854 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 6: dsp6 */
-					0xa58 8 0xa58 8 0x858 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 7: dsp7 */
-				>;
-			};
-		};
-
-		devctrl: device-state-control@2620000 {
-			dspgpio0: keystone_dsp_gpio@240 {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x240 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x240>;
-			};
-
-			dspgpio1: keystone_dsp_gpio@244 {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x244 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x244>;
-			};
-
-			dspgpio2: keystone_dsp_gpio@248 {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x248 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x248>;
-			};
-
-			dspgpio3: keystone_dsp_gpio@24c {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x24c 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x24c>;
-			};
-
-			dspgpio4: keystone_dsp_gpio@250 {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x250 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x250>;
-			};
-
-			dspgpio5: keystone_dsp_gpio@254 {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x254 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x254>;
-			};
-
-			dspgpio6: keystone_dsp_gpio@258 {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x258 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x258>;
-			};
-
-			dspgpio7: keystone_dsp_gpio@25c {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x25c 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x25c>;
-			};
-		};
-
-		dsp0: dsp@10800000 {
-			compatible = "ti,k2hk-dsp";
-			reg = <0x10800000 0x00100000>,
-			      <0x10e00000 0x00008000>,
-			      <0x10f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			clocks = <&clkgem0>;
-			ti,syscon-dev = <&devctrl 0x40>;
-			resets = <&pscrst 0>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <0 8>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio0 27 0>;
-			status = "disabled";
-		};
-
-		dsp1: dsp@11800000 {
-			compatible = "ti,k2hk-dsp";
-			reg = <0x11800000 0x00100000>,
-			      <0x11e00000 0x00008000>,
-			      <0x11f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			clocks = <&clkgem1>;
-			ti,syscon-dev = <&devctrl 0x44>;
-			resets = <&pscrst 1>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <1 9>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio1 27 0>;
-			status = "disabled";
-		};
-
-		dsp2: dsp@12800000 {
-			compatible = "ti,k2hk-dsp";
-			reg = <0x12800000 0x00100000>,
-			      <0x12e00000 0x00008000>,
-			      <0x12f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			clocks = <&clkgem2>;
-			ti,syscon-dev = <&devctrl 0x48>;
-			resets = <&pscrst 2>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <2 10>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio2 27 0>;
-			status = "disabled";
-		};
-
-		dsp3: dsp@13800000 {
-			compatible = "ti,k2hk-dsp";
-			reg = <0x13800000 0x00100000>,
-			      <0x13e00000 0x00008000>,
-			      <0x13f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			clocks = <&clkgem3>;
-			ti,syscon-dev = <&devctrl 0x4c>;
-			resets = <&pscrst 3>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <3 11>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio3 27 0>;
-			status = "disabled";
-		};
-
-		dsp4: dsp@14800000 {
-			compatible = "ti,k2hk-dsp";
-			reg = <0x14800000 0x00100000>,
-			      <0x14e00000 0x00008000>,
-			      <0x14f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			clocks = <&clkgem4>;
-			ti,syscon-dev = <&devctrl 0x50>;
-			resets = <&pscrst 4>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <4 12>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio4 27 0>;
-			status = "disabled";
-		};
-
-		dsp5: dsp@15800000 {
-			compatible = "ti,k2hk-dsp";
-			reg = <0x15800000 0x00100000>,
-			      <0x15e00000 0x00008000>,
-			      <0x15f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			clocks = <&clkgem5>;
-			ti,syscon-dev = <&devctrl 0x54>;
-			resets = <&pscrst 5>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <5 13>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio5 27 0>;
-			status = "disabled";
-		};
-
-		dsp6: dsp@16800000 {
-			compatible = "ti,k2hk-dsp";
-			reg = <0x16800000 0x00100000>,
-			      <0x16e00000 0x00008000>,
-			      <0x16f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			clocks = <&clkgem6>;
-			ti,syscon-dev = <&devctrl 0x58>;
-			resets = <&pscrst 6>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <6 14>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio6 27 0>;
-			status = "disabled";
-		};
-
-		dsp7: dsp@17800000 {
-			compatible = "ti,k2hk-dsp";
-			reg = <0x17800000 0x00100000>,
-			      <0x17e00000 0x00008000>,
-			      <0x17f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			clocks = <&clkgem7>;
-			ti,syscon-dev = <&devctrl 0x5c>;
-			resets = <&pscrst 7>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <7 15>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio7 27 0>;
-			status = "disabled";
-		};
-
-		mdio: mdio@2090300 {
-			compatible = "ti,keystone_mdio", "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x02090300 0x100>;
-			status = "disabled";
-			clocks = <&clkcpgmac>;
-			clock-names = "fck";
-			bus_freq = <2500000>;
-		};
-		/include/ "keystone-k2hk-netcp.dtsi"
-};
diff --git a/arch/arm/boot/dts/keystone-k2l-clocks.dtsi b/arch/arm/boot/dts/keystone-k2l-clocks.dtsi
deleted file mode 100644
index 635528064deae..0000000000000
--- a/arch/arm/boot/dts/keystone-k2l-clocks.dtsi
+++ /dev/null
@@ -1,263 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 lamarr SoC clock nodes
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-clocks {
-	armpllclk: armpllclk@2620370 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclksys>;
-		clock-output-names = "arm-pll-clk";
-		reg = <0x02620370 4>;
-		reg-names = "control";
-	};
-
-	mainpllclk: mainpllclk@2310110 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
-		reg-names = "control", "multiplier", "post-divider";
-	};
-
-	papllclk: papllclk@2620358 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclksys>;
-		clock-output-names = "papllclk";
-		reg = <0x02620358 4>;
-		reg-names = "control";
-	};
-
-	ddr3apllclk: ddr3apllclk@2620360 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclksys>;
-		clock-output-names = "ddr-3a-pll-clk";
-		reg = <0x02620360 4>;
-		reg-names = "control";
-	};
-
-	clkdfeiqnsys: clkdfeiqnsys@2350004 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "dfe";
-		reg-names = "control", "domain";
-		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
-		domain-id = <0>;
-	};
-
-	clkpcie1: clkpcie1@235002c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "pcie";
-		reg = <0x0235002c 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <4>;
-	};
-
-	clkgem1: clkgem1@2350040 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem1";
-		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <9>;
-	};
-
-	clkgem2: clkgem2@2350044 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem2";
-		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <10>;
-	};
-
-	clkgem3: clkgem3@2350048 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem3";
-		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <11>;
-	};
-
-	clktac: clktac@2350064 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tac";
-		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkrac: clkrac@2350068 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "rac";
-		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkdfepd0: clkdfepd0@235006c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "dfe-pd0";
-		reg = <0x0235006c 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <18>;
-	};
-
-	clkfftc0: clkfftc0@2350070 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-0";
-		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <19>;
-	};
-
-	clkosr: clkosr@2350088 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "osr";
-		reg = <0x02350088 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <21>;
-	};
-
-	clktcp3d0: clktcp3d0@235008c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-0";
-		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <22>;
-	};
-
-	clktcp3d1: clktcp3d1@2350094 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-1";
-		reg = <0x02350094 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <23>;
-	};
-
-	clkvcp0: clkvcp0@235009c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-0";
-		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp1: clkvcp1@23500a0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-1";
-		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp2: clkvcp2@23500a4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-2";
-		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp3: clkvcp3@23500a8 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-3";
-		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkbcp: clkbcp@23500bc {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "bcp";
-		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <26>;
-	};
-
-	clkdfepd1: clkdfepd1@23500c0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "dfe-pd1";
-		reg = <0x023500c0 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <27>;
-	};
-
-	clkfftc1: clkfftc1@23500c4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-1";
-		reg = <0x023500c4 0xb00>, <0x023504c0 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <28>;
-	};
-
-	clkiqnail: clkiqnail@23500c8 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "iqn-ail";
-		reg = <0x023500c8 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <29>;
-	};
-
-	clkuart2: clkuart2@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "uart2";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkuart3: clkuart3@2350000 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "uart3";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
deleted file mode 100644
index 3a69f65de81ec..0000000000000
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ /dev/null
@@ -1,165 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Lamarr EVM device tree
- *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "keystone-k2l.dtsi"
-
-/ {
-	compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone";
-	model = "Texas Instruments Keystone 2 Lamarr EVM";
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		dsp_common_memory: dsp-common-memory@81f800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
-			reusable;
-			status = "okay";
-		};
-	};
-};
-
-&soc0 {
-		clocks {
-			refclksys: refclksys {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <122880000>;
-				clock-output-names = "refclk-sys";
-			};
-		};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&keystone_usb0 {
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "host";
-};
-
-&i2c0 {
-	dtt@50 {
-		compatible = "atmel,24c1024";
-		reg = <0x50>;
-	};
-};
-
-&aemif {
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <0>;
-		/* all timings in nanoseconds */
-		ti,cs-min-turnaround-ns = <12>;
-		ti,cs-read-hold-ns = <6>;
-		ti,cs-read-strobe-ns = <23>;
-		ti,cs-read-setup-ns = <9>;
-		ti,cs-write-hold-ns = <8>;
-		ti,cs-write-strobe-ns = <23>;
-		ti,cs-write-setup-ns = <8>;
-
-		nand@0,0 {
-			compatible = "ti,keystone-nand","ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0 0x4000000
-			       1 0 0x0000100>;
-
-			ti,davinci-chipselect = <0>;
-			ti,davinci-mask-ale = <0x2000>;
-			ti,davinci-mask-cle = <0x4000>;
-			ti,davinci-mask-chipsel = <0>;
-			nand-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			nand-on-flash-bbt;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "params";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "ubifs";
-				reg = <0x180000 0x7FE80000>;
-			};
-		};
-	};
-};
-
-&spi0 {
-	nor_flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		spi-max-frequency = <54000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "misc";
-			reg = <0x80000 0xf80000>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-	ethphy0: ethernet-phy@0 {
-		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&dsp0 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
-
-&dsp1 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
-
-&dsp2 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
-
-&dsp3 {
-	memory-region = <&dsp_common_memory>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
deleted file mode 100644
index 5ec6680a533da..0000000000000
--- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
+++ /dev/null
@@ -1,246 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Keystone 2 Lamarr Netcp driver
- *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-qmss: qmss@2a40000 {
-	compatible = "ti,keystone-navigator-qmss";
-	dma-coherent;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	clocks = <&chipclk13>;
-	ranges;
-	queue-range = <0 0x2000>;
-	linkram0 = <0x100000 0x4000>;
-	linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */
-
-	qmgrs {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		qmgr0 {
-			managed-queues = <0 0x2000>;
-			reg = <0x2a40000 0x20000>,
-			      <0x2a06000 0x400>,
-			      <0x2a02000 0x1000>,
-			      <0x2a03000 0x1000>,
-			      <0x23a80000 0x20000>,
-			      <0x2a80000 0x20000>;
-			reg-names = "peek", "status", "config",
-				    "region", "push", "pop";
-		};
-	};
-	queue-pools {
-		qpend {
-			qpend-0 {
-				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
-			};
-			qpend-1 {
-				qrange = <528 16>;
-				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
-					      0 51 0xf04 0 52 0xf04 0 53 0xf04
-					      0 54 0xf04 0 55 0xf04 0 56 0xf04
-					      0 57 0xf04 0 58 0xf04 0 59 0xf04
-					      0 60 0xf04 0 61 0xf04 0 62 0xf04
-					      0 63 0xf04>;
-				qalloc-by-id;
-			};
-			qpend-2 {
-				qrange = <544 16>;
-				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
-					      0 59 0xf04 0 68 0xf04 0 69 0xf04
-					      0 70 0xf04 0 71 0xf04 0 72 0xf04
-					      0 73 0xf04 0 74 0xf04 0 75 0xf04
-					      0 76 0xf04 0 77 0xf04 0 78 0xf04
-					      0 79 0xf04>;
-			};
-		};
-		general-purpose {
-			gp-0 {
-				qrange = <4000 64>;
-			};
-			netcp-tx {
-				qrange = <896 128>;
-				qalloc-by-id;
-			};
-		};
-		accumulator {
-			acc-low-0 {
-				qrange = <480 32>;
-				accumulator = <0 47 16 2 50>;
-				interrupts = <0 226 0xf01>;
-				multi-queue;
-			};
-		};
-	};
-
-	descriptor-regions {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		region-12 {
-			id = <12>;
-			region-spec = <8192 128>;	/* num_desc desc_size */
-			link-index = <0x4000>;
-		};
-	};
-
-	pdsps {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		pdsp0@2a10000 {
-			reg = <0x2a10000 0x1000    /*iram */
-			       0x2a0f000 0x100     /*reg*/
-			       0x2a0c000 0x3c8	   /*intd */
-			       0x2a20000 0x4000>;  /*cmd*/
-			id = <0>;
-		};
-	};
-
-}; /* qmss */
-
-knav_dmas: knav_dmas@0 {
-	compatible = "ti,keystone-navigator-dma";
-	clocks = <&papllclk>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	ti,navigator-cloud-address = <0x23a80000 0x23a90000>;
-
-	dma_gbe: dma_gbe@0 {
-		reg = <0x26186000 0x100>,
-			  <0x26187000 0x2a0>,
-			  <0x26188000 0xb60>,
-			  <0x26186100 0x80>,
-			  <0x26189000 0x1000>;
-		reg-names = "global", "txchan", "rxchan",
-				"txsched", "rxflow";
-	};
-};
-
-netcp: netcp@26000000 {
-	reg = <0x2620110 0x8>;
-	reg-names = "efuse";
-	compatible = "ti,netcp-1.0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	/* NetCP address range */
-	ranges = <0 0x26000000 0x1000000>;
-
-	clocks = <&clkpa>, <&clkcpgmac>;
-	clock-names = "pa_clk", "ethss_clk";
-	dma-coherent;
-
-	ti,navigator-dmas = <&dma_gbe 0>,
-			<&dma_gbe 8>,
-			<&dma_gbe 0>;
-	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
-
-	netcp-devices {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		gbe@200000 { /* ETHSS */
-			label = "netcp-gbe";
-			compatible = "ti,netcp-gbe-5";
-			reg = <0x200000 0x900>, <0x220000 0x20000>;
-			/* enable-ale; */
-			tx-queue = <896>;
-			tx-channel = "nettx";
-
-			cpts {
-				clocks = <&cpts_refclk_mux>;
-				clock-names = "cpts";
-
-				cpts_refclk_mux: cpts-refclk-mux {
-					#clock-cells = <0>;
-					clocks = <&chipclk12>, <&chipclk13>,
-						 <&timi0>, <&timi1>,
-						 <&tsrefclk>;
-					ti,mux-tbl = <0x0>, <0x1>, <0x2>,
-						<0x3>, <0x8>;
-					assigned-clocks = <&cpts_refclk_mux>;
-					assigned-clock-parents = <&chipclk12>;
-				};
-			};
-
-			interfaces {
-				gbe0: interface-0 {
-					slave-port = <0>;
-					link-interface = <1>;
-					phy-handle = <&ethphy0>;
-				};
-				gbe1: interface-1 {
-					slave-port = <1>;
-					link-interface = <1>;
-					phy-handle = <&ethphy1>;
-				};
-			};
-
-			secondary-slave-ports {
-				port-2 {
-					slave-port = <2>;
-					link-interface = <2>;
-				};
-				port-3 {
-					slave-port = <3>;
-					link-interface = <2>;
-				};
-			};
-		};
-	};
-
-	netcp-interfaces {
-		interface-0 {
-			rx-channel = "netrx0";
-			rx-pool = <1024 12>;
-			tx-pool = <1024 12>;
-			rx-queue-depth = <128 128 0 0>;
-			rx-buffer-size = <1518 4096 0 0>;
-			rx-queue = <528>;
-			tx-completion-queue = <530>;
-			efuse-mac = <1>;
-			netcp-gbe = <&gbe0>;
-
-		};
-		interface-1 {
-			rx-channel = "netrx1";
-			rx-pool = <1024 12>;
-			tx-pool = <1024 12>;
-			rx-queue-depth = <128 128 0 0>;
-			rx-buffer-size = <1518 4096 0 0>;
-			rx-queue = <529>;
-			tx-completion-queue = <531>;
-			efuse-mac = <0>;
-			local-mac-address = [02 18 31 7e 3e 7f];
-			netcp-gbe = <&gbe1>;
-		};
-	};
-};
-
-sa_subsys: subsys@26080000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "simple-bus";
-	ranges = <0 0x26080000 0x40000>;
-
-	sa_config: subsys@0 {
-		compatible = "syscon";
-		reg = <0x0 0x100>;
-	};
-
-	rng@24000 {
-		compatible = "ti,keystone-rng";
-		reg = <0x24000 0x1000>;
-		ti,syscon-sa-cfg = <&sa_config>;
-		clocks = <&clksa>;
-		clock-names = "fck";
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
deleted file mode 100644
index 421a02bbc9d30..0000000000000
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ /dev/null
@@ -1,415 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Lamarr SoC specific device tree
- *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include <dt-bindings/reset/ti-syscon.h>
-
-/ {
-	compatible = "ti,k2l", "ti,keystone";
-	model = "Texas Instruments Keystone 2 Lamarr SoC";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gic>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-		};
-	};
-
-	aliases {
-		rproc0 = &dsp0;
-		rproc1 = &dsp1;
-		rproc2 = &dsp2;
-		rproc3 = &dsp3;
-	};
-};
-
-&soc0 {
-		/include/ "keystone-k2l-clocks.dtsi"
-
-		uart2: serial@2348400 {
-			compatible = "ti,da830-uart", "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02348400 0x100>;
-			clocks = <&clkuart2>;
-			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		uart3:	serial@2348800 {
-			compatible = "ti,da830-uart", "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02348800 0x100>;
-			clocks = <&clkuart3>;
-			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		gpio1: gpio@2348000 {
-			compatible = "ti,keystone-gpio";
-			reg = <0x02348000 0x100>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			/* HW Interrupts mapped to GPIO pins */
-			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 154 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 155 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 156 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 157 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 160 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 161 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 163 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 164 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 165 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 166 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 168 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 169 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 170 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 171 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 172 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 173 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 401 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 402 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 403 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 404 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 405 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 407 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkgpio>;
-			clock-names = "gpio";
-			ti,ngpio = <32>;
-			ti,davinci-gpio-unbanked = <32>;
-		};
-
-		k2l_pmx: pinmux@2620690 {
-			compatible = "pinctrl-single";
-			reg = <0x02620690 0xc>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pinctrl-cells = <2>;
-			pinctrl-single,bit-per-mux;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0x1>;
-			status = "disabled";
-
-			uart3_emifa_pins: pinmux_uart3_emifa_pins {
-				pinctrl-single,bits = <
-					/* UART3_EMIFA_SEL */
-					0x0 0x0  0xc0
-				>;
-			};
-
-			uart2_emifa_pins: pinmux_uart2_emifa_pins {
-			pinctrl-single,bits = <
-					/* UART2_EMIFA_SEL */
-					0x0 0x0  0x30
-				>;
-			};
-
-			uart01_spi2_pins: pinmux_uart01_spi2_pins {
-				pinctrl-single,bits = <
-					/* UART01_SPI2_SEL */
-					0x0 0x0 0x4
-				>;
-			};
-
-			dfesync_rp1_pins: pinmux_dfesync_rp1_pins{
-				pinctrl-single,bits = <
-					/* DFESYNC_RP1_SEL */
-					0x0 0x0 0x2
-				>;
-			};
-
-			avsif_pins: pinmux_avsif_pins {
-				pinctrl-single,bits = <
-					/* AVSIF_SEL */
-					0x0 0x0 0x1
-				>;
-			};
-
-			gpio_emu_pins: pinmux_gpio_emu_pins {
-				pinctrl-single,bits = <
-				/*
-				 * GPIO_EMU_SEL[31]: 0-GPIO31, 1-EMU33
-				 * GPIO_EMU_SEL[30]: 0-GPIO30, 1-EMU32
-				 * GPIO_EMU_SEL[29]: 0-GPIO29, 1-EMU31
-				 * GPIO_EMU_SEL[28]: 0-GPIO28, 1-EMU30
-				 * GPIO_EMU_SEL[27]: 0-GPIO27, 1-EMU29
-				 * GPIO_EMU_SEL[26]: 0-GPIO26, 1-EMU28
-				 * GPIO_EMU_SEL[25]: 0-GPIO25, 1-EMU27
-				 * GPIO_EMU_SEL[24]: 0-GPIO24, 1-EMU26
-				 * GPIO_EMU_SEL[23]: 0-GPIO23, 1-EMU25
-				 * GPIO_EMU_SEL[22]: 0-GPIO22, 1-EMU24
-				 * GPIO_EMU_SEL[21]: 0-GPIO21, 1-EMU23
-				 * GPIO_EMU_SEL[20]: 0-GPIO20, 1-EMU22
-				 * GPIO_EMU_SEL[19]: 0-GPIO19, 1-EMU21
-				 * GPIO_EMU_SEL[18]: 0-GPIO18, 1-EMU20
-				 * GPIO_EMU_SEL[17]: 0-GPIO17, 1-EMU19
-				 */
-					0x4 0x0000 0xFFFE0000
-				>;
-			};
-
-			gpio_timio_pins: pinmux_gpio_timio_pins {
-				pinctrl-single,bits = <
-				/*
-				 * GPIO_TIMIO_SEL[15]: 0-GPIO15, 1-TIMO7
-				 * GPIO_TIMIO_SEL[14]: 0-GPIO14, 1-TIMO6
-				 * GPIO_TIMIO_SEL[13]: 0-GPIO13, 1-TIMO5
-				 * GPIO_TIMIO_SEL[12]: 0-GPIO12, 1-TIMO4
-				 * GPIO_TIMIO_SEL[11]: 0-GPIO11, 1-TIMO3
-				 * GPIO_TIMIO_SEL[10]: 0-GPIO10, 1-TIMO2
-				 * GPIO_TIMIO_SEL[9]: 0-GPIO9, 1-TIMI7
-				 * GPIO_TIMIO_SEL[8]: 0-GPIO8, 1-TIMI6
-				 * GPIO_TIMIO_SEL[7]: 0-GPIO7, 1-TIMI5
-				 * GPIO_TIMIO_SEL[6]: 0-GPIO6, 1-TIMI4
-				 * GPIO_TIMIO_SEL[5]: 0-GPIO5, 1-TIMI3
-				 * GPIO_TIMIO_SEL[4]: 0-GPIO4, 1-TIMI2
-				 */
-					0x4 0x0 0xFFF0
-				>;
-			};
-
-			gpio_spi2cs_pins: pinmux_gpio_spi2cs_pins {
-				pinctrl-single,bits = <
-				/*
-				 * GPIO_SPI2CS_SEL[3]: 0-GPIO3, 1-SPI2CS4
-				 * GPIO_SPI2CS_SEL[2]: 0-GPIO2, 1-SPI2CS3
-				 * GPIO_SPI2CS_SEL[1]: 0-GPIO1, 1-SPI2CS2
-				 * GPIO_SPI2CS_SEL[0]: 0-GPIO0, 1-SPI2CS1
-				 */
-					0x4 0x0 0xF
-				>;
-			};
-
-			gpio_dfeio_pins: pinmux_gpio_dfeio_pins {
-				pinctrl-single,bits = <
-				/*
-				 * GPIO_DFEIO_SEL[31]: 0-DFEIO17, 1-GPIO63
-				 * GPIO_DFEIO_SEL[30]: 0-DFEIO16, 1-GPIO62
-				 * GPIO_DFEIO_SEL[29]: 0-DFEIO15, 1-GPIO61
-				 * GPIO_DFEIO_SEL[28]: 0-DFEIO14, 1-GPIO60
-				 * GPIO_DFEIO_SEL[27]: 0-DFEIO13, 1-GPIO59
-				 * GPIO_DFEIO_SEL[26]: 0-DFEIO12, 1-GPIO58
-				 * GPIO_DFEIO_SEL[25]: 0-DFEIO11, 1-GPIO57
-				 * GPIO_DFEIO_SEL[24]: 0-DFEIO10, 1-GPIO56
-				 * GPIO_DFEIO_SEL[23]: 0-DFEIO9, 1-GPIO55
-				 * GPIO_DFEIO_SEL[22]: 0-DFEIO8, 1-GPIO54
-				 * GPIO_DFEIO_SEL[21]: 0-DFEIO7, 1-GPIO53
-				 * GPIO_DFEIO_SEL[20]: 0-DFEIO6, 1-GPIO52
-				 * GPIO_DFEIO_SEL[19]: 0-DFEIO5, 1-GPIO51
-				 * GPIO_DFEIO_SEL[18]: 0-DFEIO4, 1-GPIO50
-				 * GPIO_DFEIO_SEL[17]: 0-DFEIO3, 1-GPIO49
-				 * GPIO_DFEIO_SEL[16]: 0-DFEIO2, 1-GPIO48
-				 */
-					0x8 0x0 0xFFFF0000
-				>;
-			};
-
-			gpio_emifa_pins: pinmux_gpio_emifa_pins {
-				pinctrl-single,bits = <
-				/*
-				 * GPIO_EMIFA_SEL[15]: 0-EMIFA17, 1-GPIO47
-				 * GPIO_EMIFA_SEL[14]: 0-EMIFA16, 1-GPIO46
-				 * GPIO_EMIFA_SEL[13]: 0-EMIFA15, 1-GPIO45
-				 * GPIO_EMIFA_SEL[12]: 0-EMIFA14, 1-GPIO44
-				 * GPIO_EMIFA_SEL[11]: 0-EMIFA13, 1-GPIO43
-				 * GPIO_EMIFA_SEL[10]: 0-EMIFA10, 1-GPIO42
-				 * GPIO_EMIFA_SEL[9]: 0-EMIFA9, 1-GPIO41
-				 * GPIO_EMIFA_SEL[8]: 0-EMIFA8, 1-GPIO40
-				 * GPIO_EMIFA_SEL[7]: 0-EMIFA7, 1-GPIO39
-				 * GPIO_EMIFA_SEL[6]: 0-EMIFA6, 1-GPIO38
-				 * GPIO_EMIFA_SEL[5]: 0-EMIFA5, 1-GPIO37
-				 * GPIO_EMIFA_SEL[4]: 0-EMIFA4, 1-GPIO36
-				 * GPIO_EMIFA_SEL[3]: 0-EMIFA3, 1-GPIO35
-				 * GPIO_EMIFA_SEL[2]: 0-EMIFA2, 1-GPIO34
-				 * GPIO_EMIFA_SEL[1]: 0-EMIFA1, 1-GPIO33
-				 * GPIO_EMIFA_SEL[0]: 0-EMIFA0, 1-GPIO32
-				 */
-					0x8 0x0 0xFFFF
-				>;
-			};
-		};
-
-		msm_ram: sram@c000000 {
-			compatible = "mmio-sram";
-			reg = <0x0c000000 0x200000>;
-			ranges = <0x0 0x0c000000 0x200000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			bm-sram@1f8000 {
-				reg = <0x001f8000 0x8000>;
-			};
-		};
-
-		psc: power-sleep-controller@2350000 {
-			pscrst: reset-controller {
-				compatible = "ti,k2l-pscrst", "ti,syscon-reset";
-				#reset-cells = <1>;
-
-				ti,reset-bits = <
-					0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
-					0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */
-					0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */
-					0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */
-				>;
-			};
-		};
-
-		osr: sram@70000000 {
-			compatible = "mmio-sram";
-			reg = <0x70000000 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&clkosr>;
-		};
-
-		devctrl: device-state-control@2620000 {
-			dspgpio0: keystone_dsp_gpio@240 {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x240 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x240>;
-			};
-
-			dspgpio1: keystone_dsp_gpio@244 {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x244 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x244>;
-			};
-
-			dspgpio2: keystone_dsp_gpio@248 {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x248 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x248>;
-			};
-
-			dspgpio3: keystone_dsp_gpio@24c {
-				compatible = "ti,keystone-dsp-gpio";
-				reg = <0x24c 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio,syscon-dev = <&devctrl 0x24c>;
-			};
-		};
-
-		dsp0: dsp@10800000 {
-			compatible = "ti,k2l-dsp";
-			reg = <0x10800000 0x00100000>,
-			      <0x10e00000 0x00008000>,
-			      <0x10f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			clocks = <&clkgem0>;
-			ti,syscon-dev = <&devctrl 0x844>;
-			resets = <&pscrst 0>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <0 8>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio0 27 0>;
-			status = "disabled";
-		};
-
-		dsp1: dsp@11800000 {
-			compatible = "ti,k2l-dsp";
-			reg = <0x11800000 0x00100000>,
-			      <0x11e00000 0x00008000>,
-			      <0x11f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			clocks = <&clkgem1>;
-			ti,syscon-dev = <&devctrl 0x848>;
-			resets = <&pscrst 1>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <1 9>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio1 27 0>;
-			status = "disabled";
-		};
-
-		dsp2: dsp@12800000 {
-			compatible = "ti,k2l-dsp";
-			reg = <0x12800000 0x00100000>,
-			      <0x12e00000 0x00008000>,
-			      <0x12f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			clocks = <&clkgem2>;
-			ti,syscon-dev = <&devctrl 0x84c>;
-			resets = <&pscrst 2>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <2 10>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio2 27 0>;
-			status = "disabled";
-		};
-
-		dsp3: dsp@13800000 {
-			compatible = "ti,k2l-dsp";
-			reg = <0x13800000 0x00100000>,
-			      <0x13e00000 0x00008000>,
-			      <0x13f00000 0x00008000>;
-			reg-names = "l2sram", "l1pram", "l1dram";
-			clocks = <&clkgem3>;
-			ti,syscon-dev = <&devctrl 0x850>;
-			resets = <&pscrst 3>;
-			interrupt-parent = <&kirq0>;
-			interrupts = <3 11>;
-			interrupt-names = "vring", "exception";
-			kick-gpios = <&dspgpio3 27 0>;
-			status = "disabled";
-		};
-
-		mdio: mdio@26200f00 {
-			compatible = "ti,keystone_mdio", "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x26200f00 0x100>;
-			status = "disabled";
-			clocks = <&clkcpgmac>;
-			clock-names = "fck";
-			bus_freq = <2500000>;
-		};
-		/include/ "keystone-k2l-netcp.dtsi"
-};
-
-&spi0 {
-       ti,davinci-spi-num-cs = <5>;
-};
-
-&spi1 {
-       ti,davinci-spi-num-cs = <3>;
-};
-
-&spi2 {
-       ti,davinci-spi-num-cs = <5>;
-       /* Pin muxed. Enabled and configured by Bootloader */
-       status = "disabled";
-};
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
deleted file mode 100644
index 50789f9e2215f..0000000000000
--- a/arch/arm/boot/dts/keystone.dtsi
+++ /dev/null
@@ -1,354 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "ti,keystone";
-	model = "Texas Instruments Keystone 2 SoC";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uart0;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		spi2 = &spi2;
-	};
-
-	chosen { };
-
-	memory: memory@80000000 {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
-	};
-
-	gic: interrupt-controller@2561000 {
-		compatible = "arm,gic-400", "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x0 0x02561000 0x0 0x1000>,
-		      <0x0 0x02562000 0x0 0x2000>,
-		      <0x0 0x02564000 0x0 0x2000>,
-		      <0x0 0x02566000 0x0 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-				IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts =
-			<GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
-			     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-			     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
-			     <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
-	};
-
-	psci {
-		compatible = "arm,psci";
-		method = "smc";
-		cpu_suspend = <0x84000001>;
-		cpu_off = <0x84000002>;
-		cpu_on = <0x84000003>;
-	};
-
-	soc0: soc@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "ti,keystone","simple-bus";
-		interrupt-parent = <&gic>;
-		ranges = <0x0 0x0 0x0 0xc0000000>;
-		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
-
-		pllctrl: pll-controller@2310000 {
-			compatible = "ti,keystone-pllctrl", "syscon";
-			reg = <0x02310000 0x200>;
-		};
-
-		psc: power-sleep-controller@2350000 {
-			compatible = "syscon", "simple-mfd";
-			reg = <0x02350000 0x1000>;
-		};
-
-		devctrl: device-state-control@2620000 {
-			compatible = "ti,keystone-devctrl", "syscon", "simple-mfd";
-			reg = <0x02620000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x02620000 0x1000>;
-
-			kirq0: keystone_irq@2a0 {
-				compatible = "ti,keystone-irq";
-				reg = <0x2a0 0x4>;
-				interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				ti,syscon-dev = <&devctrl 0x2a0>;
-			};
-
-			rstctrl: reset-controller@328 {
-				compatible = "ti,keystone-reset";
-				reg = <0x328 0x10>;
-				ti,syscon-pll = <&pllctrl 0xe4>;
-				ti,syscon-dev = <&devctrl 0x328>;
-				ti,wdt-list = <0>;
-			};
-		};
-
-		/include/ "keystone-clocks.dtsi"
-
-		uart0: serial@2530c00 {
-			compatible = "ti,da830-uart", "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02530c00 0x100>;
-			clocks = <&clkuart0>;
-			interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		uart1:	serial@2531000 {
-			compatible = "ti,da830-uart", "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02531000 0x100>;
-			clocks = <&clkuart1>;
-			interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		i2c0: i2c@2530000 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x02530000 0x400>;
-			clock-frequency = <100000>;
-			clocks = <&clki2c>;
-			interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@2530400 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x02530400 0x400>;
-			clock-frequency = <100000>;
-			clocks = <&clki2c>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2: i2c@2530800 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x02530800 0x400>;
-			clock-frequency = <100000>;
-			clocks = <&clki2c>;
-			interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi0: spi@21000400 {
-			compatible = "ti,keystone-spi", "ti,dm6441-spi";
-			reg = <0x21000400 0x200>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <0>;
-			interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkspi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@21000600 {
-			compatible = "ti,keystone-spi", "ti,dm6441-spi";
-			reg = <0x21000600 0x200>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <0>;
-			interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkspi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi2: spi@21000800 {
-			compatible = "ti,keystone-spi", "ti,dm6441-spi";
-			reg = <0x21000800 0x200>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <0>;
-			interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkspi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		usb_phy: usb_phy@2620738 {
-			compatible = "ti,keystone-usbphy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x2620738 24>;
-			status = "disabled";
-		};
-
-		keystone_usb0: usb@2680000 {
-			compatible = "ti,keystone-dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x2680000 0x10000>;
-			clocks = <&clkusb>;
-			clock-names = "usb";
-			interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
-			ranges;
-			dma-coherent;
-			dma-ranges;
-			status = "disabled";
-
-			usb0: usb@2690000 {
-				compatible = "snps,dwc3";
-				reg = <0x2690000 0x70000>;
-				interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
-				usb-phy = <&usb_phy>, <&usb_phy>;
-			};
-		};
-
-		wdt: wdt@22f0080 {
-			compatible = "ti,keystone-wdt","ti,davinci-wdt";
-			reg = <0x022f0080 0x80>;
-			clocks = <&clkwdtimer0>;
-		};
-
-		clock_event: timer@22f0000 {
-			compatible = "ti,keystone-timer";
-			reg = <0x022f0000 0x80>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clktimer15>;
-		};
-
-		gpio0: gpio@260bf00 {
-			compatible = "ti,keystone-gpio";
-			reg = <0x0260bf00 0x100>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			/* HW Interrupts mapped to GPIO pins */
-			interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkgpio>;
-			clock-names = "gpio";
-			ti,ngpio = <32>;
-			ti,davinci-gpio-unbanked = <32>;
-		};
-
-		aemif: aemif@21000A00 {
-			compatible = "ti,keystone-aemif", "ti,davinci-aemif";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			clocks = <&clkaemif>;
-			clock-names = "aemif";
-			clock-ranges;
-
-			reg = <0x21000A00 0x00000100>;
-			ranges = <0 0 0x30000000 0x10000000
-				  1 0 0x21000A00 0x00000100>;
-		};
-
-		pcie0: pcie@21800000 {
-			compatible = "ti,keystone-pcie", "snps,dw-pcie";
-			clocks = <&clkpcie>;
-			clock-names = "pcie";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
-			ranges = <0x82000000 0 0x50000000 0x50000000
-				  0 0x10000000>;
-
-			status = "disabled";
-			device_type = "pci";
-			num-lanes = <2>;
-			bus-range = <0x00 0xff>;
-
-			/* error interrupt */
-			interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
-					<0 0 0 2 &pcie_intc0 1>, /* INT B */
-					<0 0 0 3 &pcie_intc0 2>, /* INT C */
-					<0 0 0 4 &pcie_intc0 3>; /* INT D */
-
-			pcie_msi_intc0: msi-interrupt-controller {
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
-			};
-
-			pcie_intc0: legacy-interrupt-controller {
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
-			};
-		};
-
-		emif: emif@21010000 {
-			compatible = "ti,emif-keystone";
-			reg = <0x21010000 0x200>;
-			interrupts = <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>;
-			interrupt-parent = <&gic>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi
deleted file mode 100644
index 705c0d7effed0..0000000000000
--- a/arch/arm/boot/dts/kirkwood-6192.dtsi
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/ {
-	mbus@f1000000 {
-		pciec: pcie@82000000 {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-names = "intx", "error";
-				interrupts = <9>, <44>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie_intc 0>,
-						<0 0 0 2 &pcie_intc 1>,
-						<0 0 0 3 &pcie_intc 2>,
-						<0 0 0 4 &pcie_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-
-				pcie_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,88f6192-pinctrl";
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp5", "mpp21", "mpp23";
-				marvell,function = "sata0";
-			};
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp4", "mpp20", "mpp22";
-				marvell,function = "sata1";
-			};
-			pmx_sdio: pmx-sdio {
-				marvell,pins = "mpp12", "mpp13", "mpp14",
-					       "mpp15", "mpp16", "mpp17";
-				marvell,function = "sdio";
-			};
-		};
-
-		rtc: rtc@10300 {
-			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
-			reg = <0x10300 0x20>;
-			interrupts = <53>;
-			clocks = <&gate_clk 7>;
-		};
-
-		sata: sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <21>;
-			clocks = <&gate_clk 14>, <&gate_clk 15>;
-			clock-names = "0", "1";
-			phys = <&sata_phy0>, <&sata_phy1>;
-			phy-names = "port0", "port1";
-			status = "disabled";
-		};
-
-		sdio: mvsdio@90000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0x90000 0x200>;
-			interrupts = <28>;
-			clocks = <&gate_clk 4>;
-			bus-width = <4>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
deleted file mode 100644
index 8e311165fd130..0000000000000
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/ {
-	mbus@f1000000 {
-		pciec: pcie@82000000 {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-names = "intx", "error";
-				interrupts = <9>, <44>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie_intc 0>,
-						<0 0 0 2 &pcie_intc 1>,
-						<0 0 0 3 &pcie_intc 2>,
-						<0 0 0 4 &pcie_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-
-				pcie_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,88f6281-pinctrl";
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp5", "mpp21", "mpp23";
-				marvell,function = "sata0";
-			};
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp4", "mpp20", "mpp22";
-				marvell,function = "sata1";
-			};
-			pmx_sdio: pmx-sdio {
-				marvell,pins = "mpp12", "mpp13", "mpp14",
-					       "mpp15", "mpp16", "mpp17";
-				marvell,function = "sdio";
-			};
-		};
-
-		rtc: rtc@10300 {
-			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
-			reg = <0x10300 0x20>;
-			interrupts = <53>;
-			clocks = <&gate_clk 7>;
-		};
-
-		sata: sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <21>;
-			clocks = <&gate_clk 14>, <&gate_clk 15>;
-			clock-names = "0", "1";
-			phys = <&sata_phy0>, <&sata_phy1>;
-			phy-names = "port0", "port1";
-			status = "disabled";
-		};
-
-		sdio: mvsdio@90000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0x90000 0x200>;
-			interrupts = <28>;
-			clocks = <&gate_clk 4>;
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			bus-width = <4>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
deleted file mode 100644
index e33723160ce7c..0000000000000
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/ {
-	mbus@f1000000 {
-		pciec: pcie@82000000 {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-			        0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-names = "intx", "error";
-				interrupts = <9>, <44>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
-						<0 0 0 2 &pcie0_intc 1>,
-						<0 0 0 3 &pcie0_intc 2>,
-						<0 0 0 4 &pcie0_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-
-				pcie0_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie1: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-names = "intx", "error";
-				interrupts = <10>, <45>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
-						<0 0 0 2 &pcie1_intc 1>,
-						<0 0 0 3 &pcie1_intc 2>,
-						<0 0 0 4 &pcie1_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 18>;
-				status = "disabled";
-
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-	};
-	ocp@f1000000 {
-
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,88f6282-pinctrl";
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp5", "mpp21", "mpp23";
-				marvell,function = "sata0";
-			};
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp4", "mpp20", "mpp22";
-				marvell,function = "sata1";
-			};
-
-			/*
-			 * Default I2C1 pinctrl setting on mpp36/mpp37,
-			 * overwrite marvell,pins on board level if required.
-			 */
-			pmx_twsi1: pmx-twsi1 {
-				marvell,pins = "mpp36", "mpp37";
-				marvell,function = "twsi1";
-			};
-
-			pmx_sdio: pmx-sdio {
-				marvell,pins = "mpp12", "mpp13", "mpp14",
-					       "mpp15", "mpp16", "mpp17";
-				marvell,function = "sdio";
-			};
-		};
-
-		thermal: thermal@10078 {
-			compatible = "marvell,kirkwood-thermal";
-			reg = <0x10078 0x4>;
-			status = "okay";
-		};
-
-		rtc: rtc@10300 {
-			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
-			reg = <0x10300 0x20>;
-			interrupts = <53>;
-			clocks = <&gate_clk 7>;
-		};
-
-		i2c1: i2c@11100 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11100 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <32>;
-			clock-frequency = <100000>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_twsi1>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		sata: sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <21>;
-			clocks = <&gate_clk 14>, <&gate_clk 15>;
-			clock-names = "0", "1";
-			phys = <&sata_phy0>, <&sata_phy1>;
-			phy-names = "port0", "port1";
-			status = "disabled";
-		};
-
-		sdio: mvsdio@90000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0x90000 0x200>;
-			interrupts = <28>;
-			clocks = <&gate_clk 4>;
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			bus-width = <4>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
deleted file mode 100644
index c3469a2fc58a0..0000000000000
--- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/ {
-	mbus@f1000000 {
-		pciec: pcie@82000000 {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-names = "intx", "error";
-				interrupts = <9>, <44>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie_intc 0>,
-						<0 0 0 2 &pcie_intc 1>,
-						<0 0 0 3 &pcie_intc 2>,
-						<0 0 0 4 &pcie_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-
-				pcie_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,98dx4122-pinctrl";
-
-		};
-	};
-};
-
-&sata_phy0 {
-	status = "disabled";
-};
-
-&sata_phy1 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts
deleted file mode 100644
index 681343c1357a9..0000000000000
--- a/arch/arm/boot/dts/kirkwood-b3.dts
+++ /dev/null
@@ -1,195 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for Excito Bubba B3
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- *
- *
- * Note: This requires a new'ish version of u-boot, which disables the
- * L2 cache. If your B3 silently fails to boot, u-boot is probably too
- * old. Either upgrade, or consider the following email:
- *
- * https://lists.debian.org/debian-arm/2012/08/msg00128.html
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Excito B3";
-	compatible = "excito,b3", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-	memory { /* 512 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_led_green: pmx-led-green {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_red: pmx-led-red {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_led_blue: pmx-led-blue {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_beeper: pmx-beeper {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p16@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p16", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <40000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0xc0000>;
-					label = "u-boot";
-				};
-
-				partition@c0000 {
-					reg = <0xc0000 0x20000>;
-					label = "u-boot env";
-				};
-
-				partition@e0000 {
-					reg = <0xe0000 0x120000>;
-					label = "data";
-				};
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-			/*
-			 * There is something on the bus at address 0x64.
-			 * Not yet identified what it is, maybe the eeprom
-			 * for the Atheros WiFi chip?
-			 */
-		};
-
-
-		serial@12000 {
-			/* Internal on test pins, 3.3v TTL
-		 	 * UART0_RX = Testpoint 65
-			 * UART0_TX = Testpoint 66
-			 * See the Excito Wiki for more details.
-		 	 */
-			status = "okay";
-		};
-
-		sata@80000 {
-			/* One internal, the second as eSATA */
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio-leds {
-		/*
-		 * There is one LED "port" on the front and the colours
-		 * mix together giving some interesting combinations.
-		 */
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_green &pmx_led_red
-			      &pmx_led_blue >;
-		pinctrl-names = "default";
-
-		programming_led {
-			label = "bubba3:green:programming";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		error_led {
-			label = "bubba3:red:error";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		active_led {
-			label = "bubba3:blue:active";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_button_power>;
-		pinctrl-names = "default";
-
-		power-button {
-			/* On the back */
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	beeper: beeper {
-		/* 4KHz Piezoelectric buzzer */
-		compatible = "gpio-beeper";
-		pinctrl-0 = <&pmx_beeper>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		device_type = "ethernet-phy";
-		reg = <8>;
-	};
-
-	ethphy1: ethernet-phy@24 {
-		device_type = "ethernet-phy";
-		reg = <24>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
-
-/* Wifi model has Atheros chipset on pcie port */
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
deleted file mode 100644
index 07fbfca444d5a..0000000000000
--- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for Seagate Blackarmor NAS220
- *
- * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-
-/ {
-	model = "Seagate Blackarmor NAS220";
-	compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
-		     "marvell,kirkwood";
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "Reset";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		button {
-			label = "Power";
-			linux,code = <KEY_SLEEP>;
-			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		blue-power {
-			label = "nas220:blue:power";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
-		pinctrl-names = "default";
-
-		sata0_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		sata1_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-/*
- * Serial port routed to connector CN5
- *
- * pin 1 - TX (CPU's TX)
- * pin 4 - RX (CPU's RX)
- * pin 6 - GND
- */
-&uart0 {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_button_reset &pmx_button_power>;
-	pinctrl-names = "default";
-
-	pmx_act_sata0: pmx-act-sata0 {
-		marvell,pins = "mpp15";
-		marvell,function = "sata0";
-	};
-
-	pmx_act_sata1: pmx-act-sata1 {
-		marvell,pins = "mpp16";
-		marvell,function = "sata1";
-	};
-
-	pmx_power_sata0: pmx-power-sata0 {
-		marvell,pins = "mpp24";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_sata1: pmx-power-sata1 {
-		marvell,pins = "mpp28";
-		marvell,function = "gpio";
-	};
-
-	pmx_button_reset: pmx-button-reset {
-		marvell,pins = "mpp29";
-		marvell,function = "gpio";
-	};
-
-	pmx_button_power: pmx-button-power {
-		marvell,pins = "mpp26";
-		marvell,function = "gpio";
-	};
-};
-
-&sata {
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	adt7476: thermal@2e {
-		compatible = "adi,adt7476";
-		reg = <0x2e>;
-	};
-};
-
-&nand {
-	status = "okay";
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		 reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-c200-v1.dts b/arch/arm/boot/dts/kirkwood-c200-v1.dts
deleted file mode 100644
index f59ff7578dfcd..0000000000000
--- a/arch/arm/boot/dts/kirkwood-c200-v1.dts
+++ /dev/null
@@ -1,310 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Ctera C200 V1 Board Description
- * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Ctera C200 V1";
-	compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-
-		power {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		};
-
-		usb1 {
-			label = "USB1 Button";
-			linux,code = <BTN_0>;
-			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-
-		usb2 {
-			label = "USB2 Button";
-			linux,code = <BTN_1>;
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds>;
-		pinctrl-names = "default";
-
-		led-0 {
-			function = LED_FUNCTION_DISK;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-		};
-
-		led-1 {
-			function = LED_FUNCTION_DISK;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-
-		led-2 {
-			function = LED_FUNCTION_DISK;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-
-		led-3 {
-			function = LED_FUNCTION_DISK;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-		};
-
-		led-4 {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		led-5 {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-
-		led-6 {
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		};
-
-		led-7 {
-			function = LED_FUNCTION_DISK_ERR;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-
-		led-8 {
-			function = LED_FUNCTION_DISK_ERR;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-
-		led-9 {
-			function = LED_FUNCTION_USB;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		};
-
-		led-10 {
-			function = LED_FUNCTION_USB;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "usbport";
-			trigger-sources = <&hub_port2>;
-		};
-
-		led-11 {
-			function = LED_FUNCTION_USB;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-
-		led-12 {
-			function = LED_FUNCTION_USB;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "usbport";
-			trigger-sources = <&hub_port1>;
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-};
-
-&eth0port {
-	phy-handle = <&ethphy9>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	rtc@30 {
-		compatible = "s35390a";
-		reg = <0x30>;
-	};
-
-	lm63@4c {
-		compatible = "national,lm63";
-		reg = <0x4c>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy9: ethernet-phy@9 {
-		reg = <9>;
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <40>;
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0000000 0x200000>;
-	};
-
-	partition@200000 {
-		label = "certificate";
-		reg = <0x0200000 0x100000>;
-	};
-
-	partition@300000 {
-		label = "preset_cfg";
-		reg = <0x0300000 0x100000>;
-	};
-
-	partition@400000 {
-		label = "dev_params";
-		reg = <0x0400000 0x100000>;
-	};
-
-	partition@500000 {
-		label = "active_bank";
-		reg = <0x0500000 0x0100000>;
-	};
-
-	partition@600000 {
-		label = "magic";
-		reg = <0x0600000 0x0100000>;
-	};
-
-	partition@700000 {
-		label = "bank1";
-		reg = <0x0700000 0x2800000>;
-	};
-
-	partition@2f00000 {
-		label = "bank2";
-		reg = <0x2f00000 0x2800000>;
-	};
-
-	/* 0x5700000-0x5a00000 undefined in vendor firmware */
-
-	partition@5a00000 {
-		label = "reserved";
-		reg = <0x5a00000 0x2000000>;
-	};
-
-	partition@7a00000 {
-		label = "rootfs";
-		reg = <0x7a00000 0x8600000>;
-	};
-};
-
-&pinctrl {
-	/* Buzzer gpios are connected to two pins of buzzer.
-	 * This buzzer require a modulated signal from gpio.
-	 * Leave it as is due lack of proper driver.
-	 */
-	pmx_buzzer: pmx-buzzer {
-		marvell,pins = "mpp12", "mpp13";
-		marvell,function = "gpio";
-	};
-
-	pmx_leds: pmx-leds {
-		marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38",
-			       "mpp39", "mpp40", "mpp42", "mpp43", "mpp44",
-			       "mpp45", "mpp46", "mpp47";
-		marvell,function = "gpio";
-	};
-
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49";
-		marvell,function = "gpio";
-	};
-
-	pmx_poweroff: pmx-poweroff {
-		marvell,pins = "mpp34";
-		marvell,function = "gpio";
-	};
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	port@1 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-		#trigger-source-cells = <0>;
-
-		hub_port1: port@1 {
-			reg = <1>;
-			#trigger-source-cells = <0>;
-		};
-
-		hub_port2: port@2 {
-			reg = <2>;
-			#trigger-source-cells = <0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
deleted file mode 100644
index 448b0cd23b5f1..0000000000000
--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "LaCie CloudBox";
-	compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
-				marvell,pins = "mpp15";
-				marvell,function = "sata0";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			pinctrl-0 = <&pmx_cloudbox_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		power {
-			label = "Power push button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-fail {
-			label = "cloudbox:red:fail";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		};
-		blue-sata {
-			label = "cloudbox:blue:sata";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/kirkwood-d2net.dts
deleted file mode 100644
index bd3b266dd7660..0000000000000
--- a/arch/arm/boot/dts/kirkwood-d2net.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for d2 Network v2
- *
- * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org>
- *
-*/
-
-/dts-v1/;
-
-#include <dt-bindings/leds/leds-ns2.h>
-#include "kirkwood-netxbig.dtsi"
-
-/ {
-	model = "LaCie d2 Network v2";
-	compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "d2net_v2:blue:sata";
-			slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-			cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-			modes-map = <NS_V2_LED_OFF  1 0
-				     NS_V2_LED_ON   0 1
-				     NS_V2_LED_ON   1 1
-				     NS_V2_LED_SATA 0 0>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-fail {
-			label = "d2net_v2:red:fail";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
deleted file mode 100644
index a9a8e6b744c76..0000000000000
--- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell DB-88F6281-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood-db.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Marvell DB-88F6281-BP Development Board";
-	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
deleted file mode 100644
index 6dc6579d45240..0000000000000
--- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell DB-88F6282-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood-db.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Marvell DB-88F6282-BP Development Board";
-	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi
deleted file mode 100644
index 6fe2e31534afd..0000000000000
--- a/arch/arm/boot/dts/kirkwood-db.dtsi
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file contains the definitions that are common between the 6281
- * and 6282 variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pin-controller@10000 {
-			pmx_sdio_gpios: pmx-sdio-gpios {
-				marvell,pins = "mpp37", "mpp38";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
-
-		ehci@50000 {
-			status = "okay";
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio_gpios>;
-			pinctrl-names = "default";
-			wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			status = "okay";
-		};
-	};
-};
-
-&nand {
-	chip-delay = <25>;
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "root";
-		reg = <0x500000 0x1fb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
deleted file mode 100644
index 0c0851cd9bece..0000000000000
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ /dev/null
@@ -1,277 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "D-Link DIR-665";
-	compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>; /* 128 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 =< &pmx_led_usb
-				     &pmx_led_internet_blue
-				     &pmx_led_internet_amber
-				     &pmx_led_5g &pmx_led_status_blue
-				     &pmx_led_wps &pmx_led_status_amber
-				     &pmx_led_24g
-				     &pmx_btn_restart &pmx_btn_wps>;
-			pinctrl-names = "default";
-
-			pmx_led_usb: pmx-led-usb {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-			pmx_led_internet_blue: pmx-led-internet-blue {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_led_internet_amber: pmx-led-internet-amber {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_led_5g: pmx-led-5g {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_led_status_blue: pmx-led-status-blue {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_led_wps: pmx-led-wps {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_led_status_amber: pmx-led-status-amber {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-			pmx_led_24g: pmx-led-24g {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-			pmx_btn_restart: pmx-btn-restart {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_btn_wps: pmx-btn-wps {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-		};
-
-		spi@10600 {
-			status = "okay";
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				reg = <0>;
-
-				partition@0 {
-					label = "uboot";
-					reg = <0x0 0x30000>;
-					read-only;
-				};
-
-				partition@30000 {
-					label = "nvram";
-					reg = <0x30000 0x10000>;
-					read-only;
-				};
-
-				partition@40000 {
-					label = "kernel";
-					reg = <0x40000 0x180000>;
-				};
-
-				partition@1c0000 {
-					label = "rootfs";
-					reg = <0x1c0000 0xe00000>;
-				};
-
-				cal_data: partition@fc0000 {
-					label = "cal_data";
-					reg = <0xfc0000 0x10000>;
-					read-only;
-				};
-
-				partition@fd0000 {
-					label = "lang_pack";
-					reg = <0xfd0000 0x30000>;
-					read-only;
-				};
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		i2c@11000 {
-			status = "okay";
-		};
-
-		ehci@50000 {
-			status = "okay";
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		blue-usb {
-			label = "dir665:blue:usb";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		blue-internet {
-			/* Can only be turned on if the Internet
-			 * Ethernet port has Link
-			 */
-			label = "dir665:blue:internet";
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-		amber-internet {
-			label = "dir665:amber:internet";
-			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		};
-		blue-wifi5g {
-			label = "dir665:blue:5g";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		};
-		blue-status {
-			label = "dir665:blue:status";
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-		blue-wps {
-			label = "dir665:blue:wps";
-			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-		};
-		amber-status {
-			label = "dir665:amber:status";
-			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		};
-		blue-24g {
-			label = "dir665:blue:24g";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-		wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	switch@0 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan4";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan3";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan1";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-
-			port@6 {
-				reg = <6>;
-				phy-mode = "rgmii-id";
-				ethernet = <&eth0port>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
- * fixed speed and duplex. */
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		speed = <1000>;
-		duplex = <1>;
-		phy-mode = "rgmii";
-	};
-};
-
-/* eth1 is connected to the switch as well. However DSA only supports a
- * single CPU port. So leave this port disabled to avoid confusion. */
-
-&eth1 {
-	status = "disabled";
-};
-
-/* There is no battery on the boards, so the RTC does not keep time
- * when there is no power, making it useless. */
-&rtc {
-	status = "disabled";
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
deleted file mode 100644
index d6b0f418fd018..0000000000000
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood-dnskw.dtsi"
-
-/ {
-	model = "D-Link DNS-320 NAS (Rev A1)";
-	compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_320
-			     &pmx_led_red_left_hdd &pmx_led_red_right_hdd
-			     &pmx_led_white_usb>;
-		pinctrl-names = "default";
-
-		blue-power {
-			label = "dns320:blue:power";
-			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		blue-usb {
-			label = "dns320:blue:usb";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-		orange-l_hdd {
-			label = "dns320:orange:l_hdd";
-			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-		orange-r_hdd {
-			label = "dns320:orange:r_hdd";
-			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		};
-		orange-usb {
-			label = "dns320:orange:usb";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
-		};
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		serial@12100 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
deleted file mode 100644
index 94d9c06cbbf5c..0000000000000
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood-dnskw.dtsi"
-
-/ {
-	model = "D-Link DNS-325 NAS (Rev A1)";
-	compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325
-			     &pmx_led_red_left_hdd &pmx_led_red_right_hdd
-			     &pmx_led_white_usb>;
-		pinctrl-names = "default";
-
-		white-power {
-			label = "dns325:white:power";
-			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		white-usb {
-			label = "dns325:white:usb";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
-		};
-		red-l_hdd {
-			label = "dns325:red:l_hdd";
-			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-		red-r_hdd {
-			label = "dns325:red:r_hdd";
-			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		};
-		red-usb {
-			label = "dns325:red:usb";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	ocp@f1000000 {
-		i2c@11000 {
-			status = "okay";
-
-			lm75: lm75@48 {
-				compatible = "national,lm75";
-				reg = <0x48>;
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
deleted file mode 100644
index eb917462b219b..0000000000000
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ /dev/null
@@ -1,235 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "D-Link DNS NASes (kirkwood-based)";
-	compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_power &pmx_button_unmount
-			     &pmx_button_reset>;
-		pinctrl-names = "default";
-
-		power {
-			label = "Power button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-		eject {
-			label = "USB unmount button";
-			linux,code = <KEY_EJECTCD>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		reset {
-			label = "Reset button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_fan {
-		/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
-			 &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_power_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
-				     &pmx_present_sata1 &pmx_fan_tacho
-				     &pmx_temp_alarm>;
-			pinctrl-names = "default";
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp20";
-				marvell,function = "sata1";
-			};
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp21";
-				marvell,function = "sata0";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp26";
-				marvell,function = "gpio";
-			};
-			pmx_led_red_right_hdd: pmx-led-red-right-hdd {
-				marvell,pins = "mpp27";
-				marvell,function = "gpio";
-			};
-			pmx_led_red_left_hdd: pmx-led-red-left-hdd {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_led_red_usb_325: pmx-led-red-usb-325 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-			pmx_led_red_usb_320: pmx-led-red-usb-320 {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-			pmx_power_off: pmx-power-off {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_power_back_on: pmx-power-back-on {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_power_sata0: pmx-power-sata0 {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_power_sata1: pmx-power-sata1 {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_present_sata0: pmx-present-sata0 {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_present_sata1: pmx-present-sata1 {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_led_white_usb: pmx-led-white-usb {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_fan_tacho: pmx-fan-tacho {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_fan_high_speed: pmx-fan-high-speed {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_fan_low_speed: pmx-fan-low-speed {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_button_unmount: pmx-button-unmount {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-			pmx_temp_alarm: pmx-temp-alarm {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-		};
-		sata@80000 {
-			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
-		pinctrl-names = "default";
-
-		sata0_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 7 0>;
-		};
-		sata1_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 8 0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <35>;
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x500000>;
-	};
-
-	partition@600000 {
-		label = "ramdisk";
-		reg = <0x0600000 0x500000>;
-	};
-
-	partition@b00000 {
-		label = "image";
-		reg = <0x0b00000 0x6600000>;
-	};
-
-	partition@7100000 {
-		label = "mini firmware";
-		reg = <0x7100000 0xa00000>;
-	};
-
-	partition@7b00000 {
-		label = "config";
-		reg = <0x7b00000 0x500000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
deleted file mode 100644
index 264938dfa4d94..0000000000000
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Seagate FreeAgent Dockstar";
-	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_led_green: pmx-led-green {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_orange: pmx-led-orange {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-	};
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
-		pinctrl-names = "default";
-
-		health {
-			label = "status:green:health";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		fault {
-			label = "status:orange:fault";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "data";
-		reg = <0x0500000 0xfb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		compatible = "marvell,88e1116";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
deleted file mode 100644
index 328516351e847..0000000000000
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Globalscale Technologies Dreamplug";
-	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_bluetooth: pmx-led-bluetooth {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_led_wifi: pmx-led-wifi {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-			pmx_led_wifi_ap: pmx-led-wifi-ap {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p40@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <50000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-
-				partition@100000 {
-					reg = <0x100000 0x10000>;
-					label = "u-boot env";
-				};
-
-				partition@180000 {
-					reg = <0x180000 0x10000>;
-					label = "dtb";
-				};
-			};
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-			broken-cd;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
-			     &pmx_led_wifi_ap >;
-		pinctrl-names = "default";
-
-		bluetooth {
-			label = "dreamplug:blue:bluetooth";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		wifi {
-			label = "dreamplug:green:wifi";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-		wifi-ap {
-			label = "dreamplug:green:wifi_ap";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts
deleted file mode 100644
index 29982e7acb7fd..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ds109.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS109, DS110, DS110jv20";
-	compatible = "synology,ds109", "synology,ds110jv20",
-		     "synology,ds110", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-1 {
-		status = "okay";
-	};
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
deleted file mode 100644
index d68c616e9309d..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ds110jv10.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS110j v10 and v30";
-	compatible = "synology,ds110jv10", "synology,ds110jv30",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-1 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts
deleted file mode 100644
index e1420cbcd7e43..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ds111.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS111";
-	compatible = "synology,ds111", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-1 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
deleted file mode 100644
index 3912f1b525b66..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ds112.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS112";
-	compatible = "synology,ds111", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-21-2 {
-		status = "okay";
-	};
-
-	regulators-hdd-30 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts
deleted file mode 100644
index f41fe95e055f0..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ds209.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS209";
-	compatible = "synology,ds209", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "okay";
-	};
-
-	regulators-hdd-31 {
-		status = "okay";
-	};
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts
deleted file mode 100644
index 729f959a7838f..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ds210.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS210 v10, v20, v30, DS211j";
-	compatible = "synology,ds210jv10", "synology,ds210jv20",
-		     "synology,ds210jv30", "synology,ds211j",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "okay";
-	};
-
-	regulators-hdd-31 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts
deleted file mode 100644
index 416bab50d1709..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ds212.dts
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
-	compatible = "synology,ds212", "synology,ds212pv10",
-		     "synology,ds212pv10", "synology,ds212pv20",
-		     "synology,ds213airv10", "synology,ds213v10",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts
deleted file mode 100644
index 14cf4d8afaf37..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ds212j.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS212j v10, v20";
-	compatible = "synology,ds212jv10", "synology,ds212jv20",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts
deleted file mode 100644
index a8650f9e3eb76..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ds409.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS409, DS410j";
-	compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-15-18 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-
-	gpio-leds-alarm-12 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts
deleted file mode 100644
index 27a1d840bd15c..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ds409slim.dts
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology 409slim";
-	compatible = "synology,ds409slim", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-20 {
-		status = "okay";
-	};
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
deleted file mode 100644
index 1d4256ef325d8..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ds411.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS411, DS413jv10";
-	compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-
-	regulators-hdd-34 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts
deleted file mode 100644
index bb3200daea1e4..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ds411j.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS411j";
-	compatible = "synology,ds411j", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-15-18 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-
-	gpio-leds-alarm-12 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts
deleted file mode 100644
index 9c5364a4e0a88..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ds411slim.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS411slim";
-	compatible = "synology,ds411slim", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
deleted file mode 100644
index d4cb3cd3e2a2d..0000000000000
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Seagate GoFlex Net";
-	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_led_right_cap_0: pmx-led_right_cap_0 {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_right_cap_1: pmx-led_right_cap_1 {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_led_right_cap_2: pmx-led_right_cap_2 {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_led_right_cap_3: pmx-led_right_cap_3 {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_led_left_cap_0: pmx-led_left_cap_0 {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_led_left_cap_1: pmx-led_left_cap_1 {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_led_left_cap_2: pmx-led_left_cap_2 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_led_left_cap_3: pmx-led_left_cap_3 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_led_green: pmx-led_green {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_orange: pmx-led_orange {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-	};
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_orange
-			      &pmx_led_left_cap_0 &pmx_led_left_cap_1
-			      &pmx_led_left_cap_2 &pmx_led_left_cap_3
-			      &pmx_led_right_cap_0 &pmx_led_right_cap_1
-			      &pmx_led_right_cap_2 &pmx_led_right_cap_3
-			    >;
-		pinctrl-names = "default";
-
-		health {
-			label = "status:green:health";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		fault {
-			label = "status:orange:fault";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		left0 {
-			label = "status:white:left0";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-		left1 {
-			label = "status:white:left1";
-			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		};
-		left2 {
-			label = "status:white:left2";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-		left3 {
-			label = "status:white:left3";
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-		right0 {
-			label = "status:white:right0";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		};
-		right1 {
-			label = "status:white:right1";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-		right2 {
-			label = "status:white:right2";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-		right3 {
-			label = "status:white:right3";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	chip-delay = <40>;
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "pogoplug";
-		reg = <0x0500000 0x2000000>;
-	};
-
-	partition@2500000 {
-		label = "root";
-		reg = <0x02500000 0xd800000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
deleted file mode 100644
index dfb41393941db..0000000000000
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Globalscale Technologies Guruplug Server Plus";
-	compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_health_r: pmx-led-health-r {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_health_g: pmx-led-health-g {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_led_wmode_r: pmx-led-wmode-r {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-			pmx_led_wmode_g: pmx-led-wmode-g {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		/* AzureWave AW-GH381 WiFi/BT */
-		mvsdio@90000 {
-			status = "okay";
-			non-removable;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
-			      &pmx_led_wmode_r &pmx_led_wmode_g >;
-		pinctrl-names = "default";
-
-		health-r {
-			label = "guruplug:red:health";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-		health-g {
-			label = "guruplug:green:health";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		wmode-r {
-			label = "guruplug:red:wmode";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-		wmode-g {
-			label = "guruplug:green:wmode";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x00000000 0x00100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x00100000 0x00400000>;
-	};
-
-	partition@500000 {
-		label = "data";
-		reg = <0x00500000 0x1fb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		/* Marvell 88E1121R */
-		compatible = "ethernet-phy-id0141.0cb0",
-		             "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		/* Marvell 88E1121R */
-		compatible = "ethernet-phy-id0141.0cb0",
-		             "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-		phy-connection-type = "rgmii-id";
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-		phy-connection-type = "rgmii-id";
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
deleted file mode 100644
index 962a910a6f5ca..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
-	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_os_red: pmx-led-os-red {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-			pmx_power_off: pmx-power-off {
-				marvell,pins = "mpp24";
-				marvell,function = "gpio";
-			};
-			pmx_led_os_green: pmx-led-os-green {
-				marvell,pins = "mpp25";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb_transfer: pmx-led-usb-transfer {
-				marvell,pins = "mpp27";
-				marvell,function = "gpio";
-			};
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_button_usb_copy: pmx-button-usb-copy {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
-		pinctrl-names = "default";
-
-		copy {
-			label = "USB Copy";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-		reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
-			     &pmx_led_usb_transfer>;
-		pinctrl-names = "default";
-
-		green-os {
-			label = "ib62x0:green:os";
-			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		red-os {
-			label = "ib62x0:red:os";
-			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-		};
-		usb-copy {
-			label = "ib62x0:red:usb_copy";
-			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_power_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0xe0000>;
-	};
-
-	partition@e0000 {
-		label = "u-boot environment";
-		reg = <0xe0000 0x20000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x600000>;
-	};
-
-	partition@700000 {
-		label = "root";
-		reg = <0x0700000 0xf900000>;
-	};
-
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
deleted file mode 100644
index aed20185fd7ab..0000000000000
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ /dev/null
@@ -1,195 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Iomega Iconnect";
-	compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-		linux,initrd-start = <0x4500040>;
-		linux,initrd-end   = <0x4800000>;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-			pmx_button_otb: pmx-button-otb {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-			pmx_led_level: pmx-led-level {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_led_power_blue: pmx-led-power-blue {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_led_power_red: pmx-power-red {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb1: pmx-led-usb1 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb2: pmx-led-usb2 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb3: pmx-led-usb3 {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb4: pmx-led-usb4 {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_led_otb: pmx-led-otb {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-		};
-		i2c@11000 {
-			status = "okay";
-
-			lm63: lm63@4c {
-				compatible = "national,lm63";
-				reg = <0x4c>;
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
-			      &pmx_led_power_red &pmx_led_usb1
-			      &pmx_led_usb2 &pmx_led_usb3
-			      &pmx_led_usb4 &pmx_led_otb >;
-		pinctrl-names = "default";
-
-		led-level {
-			label = "led_level";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-		power-blue {
-			label = "power:blue";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		power-red {
-			label = "power:red";
-			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		};
-		usb1 {
-			label = "usb1:blue";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-		usb2 {
-			label = "usb2:blue";
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-		usb3 {
-			label = "usb3:blue";
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-		usb4 {
-			label = "usb4:blue";
-			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-		};
-		otb {
-			label = "otb:blue";
-			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
-		pinctrl-names = "default";
-
-		otb {
-			label = "OTB Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-		reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0000000 0xc0000>;
-	};
-
-	partition@a0000 {
-		label = "env";
-		reg = <0xa0000 0x20000>;
-	};
-
-	partition@100000 {
-		label = "zImage";
-		reg = <0x100000 0x300000>;
-	};
-
-	partition@540000 {
-		label = "initrd";
-		reg = <0x540000 0x300000>;
-	};
-
-	partition@980000 {
-		label = "boot";
-		reg = <0x980000 0x1f400000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@11 {
-		reg = <11>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
deleted file mode 100644
index 2338f495d5172..0000000000000
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ /dev/null
@@ -1,226 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Iomega StorCenter ix2-200";
-	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
-				      &pmx_led_sata_brt_ctrl_2
-				      &pmx_led_backup_brt_ctrl_1
-				      &pmx_led_backup_brt_ctrl_2
-				      &pmx_led_power_brt_ctrl_1
-				      &pmx_led_power_brt_ctrl_2
-				      &pmx_led_health_brt_ctrl_1
-				      &pmx_led_health_brt_ctrl_2
-				      &pmx_led_rebuild_brt_ctrl_1
-				      &pmx_led_rebuild_brt_ctrl_2 >;
-			pinctrl-names = "default";
-
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp14";
-				marvell,function = "gpio";
-			};
-			pmx_led_backup: pmx-led-backup {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-			pmx_button_otb: pmx-button-otb {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-			pmx_led_rebuild: pmx-led-rebuild {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_led_health: pmx-led_health {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-
-		};
-		i2c@11000 {
-			status = "okay";
-
-			lm63: lm63@4c {
-				compatible = "national,lm63";
-				reg = <0x4c>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-	};
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_backup &pmx_led_power
-			      &pmx_led_rebuild &pmx_led_health >;
-		pinctrl-names = "default";
-
-		power_led {
-			label = "status:white:power_led";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		rebuild_led {
-			label = "status:white:rebuild_led";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		};
-		health_led {
-			label = "status:red:health_led";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		};
-		backup_led {
-			label = "status:blue:backup_led";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_reset &pmx_button_power
-			     &pmx_button_otb>;
-		pinctrl-names = "default";
-
-
-		Power {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-		};
-		Reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		};
-		OTB {
-			label = "OTB Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@a0000 {
-		label = "env";
-		reg = <0xa0000 0x20000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x100000 0x300000>;
-	};
-
-	partition@400000 {
-		label = "rootfs";
-		reg = <0x400000 0x1C00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy1: ethernet-phy@11 {
-		reg = <11>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		speed = <1000>;
-		duplex = <1>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
deleted file mode 100644
index 1bc16a5cdbaab..0000000000000
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/leds/leds-ns2.h>
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	model = "LaCie Internet Space v2";
-	compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			slow-gpio = <&gpio0 29 0>;
-			cmd-gpio = <&gpio0 30 0>;
-			modes-map = <NS_V2_LED_OFF  1 0
-				     NS_V2_LED_ON   0 1
-				     NS_V2_LED_ON   1 1
-				     NS_V2_LED_SATA 0 0>;
-		};
-	};
-};
-
-&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/kirkwood-km_common.dtsi
deleted file mode 100644
index 52baffe45f126..0000000000000
--- a/arch/arm/boot/dts/kirkwood-km_common.dtsi
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
-			pinctrl-names = "default";
-
-			pmx_i2c_gpio_sda: pmx-gpio-sda {
-				marvell,pins = "mpp8";
-				marvell,function = "gpio";
-			};
-			pmx_i2c_gpio_scl: pmx-gpio-scl {
-				marvell,pins = "mpp9";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-	};
-
-	i2c {
-		compatible = "i2c-gpio";
-		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
-			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <25>;
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-km_fixedeth.dts b/arch/arm/boot/dts/kirkwood-km_fixedeth.dts
deleted file mode 100644
index 515be7bccc0a9..0000000000000
--- a/arch/arm/boot/dts/kirkwood-km_fixedeth.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-98dx4122.dtsi"
-#include "kirkwood-km_common.dtsi"
-
-/ {
-	model = "Keymile Kirkwood Fixed Eth";
-	compatible = "keymile,km_fixedeth", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		speed = <1000>;  /* <SPEED_1000> */
-		duplex = <1>; /* <DUPLEX_FULL> */
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
deleted file mode 100644
index f035eff1c111b..0000000000000
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-98dx4122.dtsi"
-#include "kirkwood-km_common.dtsi"
-
-/ {
-	model = "Keymile Kirkwood Reference Design";
-	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/kirkwood-l-50.dts
deleted file mode 100644
index 9fd3581bb24b4..0000000000000
--- a/arch/arm/boot/dts/kirkwood-l-50.dts
+++ /dev/null
@@ -1,438 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Check Point L-50 Board Description
- * Copyright 2020 Pawel Dembicki <paweldembicki@gmail.com>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Check Point L-50";
-	compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
-			pinctrl-names = "default";
-
-			pmx_sysrst: pmx-sysrst {
-				marvell,pins = "mpp6";
-				marvell,function = "sysrst";
-			};
-
-			pmx_button29: pmx_button29 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_led38: pmx_led38 {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		mvsdio@90000 {
-			status = "okay";
-			cd-gpios = <&gpio1 14 9>;
-		};
-
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			gpio2: gpio-expander@20{
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "semtech,sx1505q";
-				reg = <0x20>;
-
-				gpio-controller;
-			};
-
-			/* Three GPIOs from 0x21 exp. are undescribed in dts:
-			 * 1: DSL module reset (active low)
-			 * 5: mPCIE reset (active low)
-			 * 6: Express card reset (active low)
-			 */
-			gpio3: gpio-expander@21{
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "semtech,sx1505q";
-				reg = <0x21>;
-
-				gpio-controller;
-			};
-
-			rtc@30 {
-				compatible = "s35390a";
-				reg = <0x30>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status_green {
-			label = "l-50:green:status";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		status_red {
-			label = "l-50:red:status";
-			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
-		};
-
-		wifi {
-			label = "l-50:green:wifi";
-			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		internet_green {
-			label = "l-50:green:internet";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-		};
-
-		internet_red {
-			label = "l-50:red:internet";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		};
-
-		usb1_green {
-			label = "l-50:green:usb1";
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "usbport";
-			trigger-sources = <&hub_port3>;
-		};
-
-		usb1_red {
-			label = "l-50:red:usb1";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-		};
-
-		usb2_green {
-			label = "l-50:green:usb2";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "usbport";
-			trigger-sources = <&hub_port1>;
-		};
-
-		usb2_red {
-			label = "l-50:red:usb2";
-			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	usb2_pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "usb2_pwr";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
-		regulator-always-on;
-	};
-
-	usb1_pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "usb1_pwr";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
-		regulator-always-on;
-	};
-
-	mpcie_pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "mpcie_pwr";
-
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	express_card_pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "express_card_pwr";
-
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		factory_defaults {
-			label = "factory_defaults";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy8: ethernet-phy@8 {
-		reg = <0x08>;
-	};
-
-	switch0: switch@10 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10>;
-		dsa,member = <0 0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan5";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan1";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan6";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan2";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan7";
-			};
-
-			switch0port5: port@5 {
-				reg = <5>;
-				phy-mode = "rgmii-txid";
-				link = <&switch1port5>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			port@6 {
-				reg = <6>;
-				phy-mode = "rgmii-id";
-				ethernet = <&eth1port>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-
-	switch@11 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x11>;
-		dsa,member = <0 1>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan3";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan8";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan4";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "dmz";
-			};
-
-			switch1port5: port@5 {
-				reg = <5>;
-				phy-mode = "rgmii-txid";
-				link = <&switch0port5>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			port@6 {
-				reg = <6>;
-				label = "dsl";
-				fixed-link {
-					speed = <100>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy8>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		speed = <1000>;
-		duplex = <1>;
-		phy-mode = "rgmii";
-	};
-};
-
-&nand {
-	status = "okay";
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x00000000 0x000c0000>;
-	};
-
-	partition@a0000 {
-		label = "bootldr-env";
-		reg = <0x000c0000 0x00040000>;
-	};
-
-	partition@100000 {
-		label = "kernel-1";
-		reg = <0x00100000 0x00800000>;
-	};
-
-	partition@900000 {
-		label = "rootfs-1";
-		reg = <0x00900000 0x07100000>;
-	};
-
-	partition@7a00000 {
-		label = "kernel-2";
-		reg = <0x07a00000 0x00800000>;
-	};
-
-	partition@8200000 {
-		label = "rootfs-2";
-		reg = <0x08200000 0x07100000>;
-	};
-
-	partition@f300000 {
-		label = "default_sw";
-		reg = <0x0f300000 0x07900000>;
-	};
-
-	partition@16c00000 {
-		label = "logs";
-		reg = <0x16c00000 0x01800000>;
-	};
-
-	partition@18400000 {
-		label = "preset_cfg";
-		reg = <0x18400000 0x00100000>;
-	};
-
-	partition@18500000 {
-		label = "adsl";
-		reg = <0x18500000 0x00100000>;
-	};
-
-	partition@18600000 {
-		label = "storage";
-		reg = <0x18600000 0x07a00000>;
-	};
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&sata_phy0 {
-	status = "disabled";
-};
-
-&sata_phy1 {
-	status = "disabled";
-};
-
-&usb0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	port@1 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-		#trigger-source-cells = <0>;
-
-		hub_port1: port@1 {
-			reg = <1>;
-			#trigger-source-cells = <0>;
-		};
-
-		hub_port3: port@3 {
-			reg = <3>;
-			#trigger-source-cells = <0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts
deleted file mode 100644
index 8c2b540eaf4ff..0000000000000
--- a/arch/arm/boot/dts/kirkwood-laplug.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
- *
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-
-/ {
-	model = "LaCie LaPlug";
-	compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>; /* 128 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			eeprom@50 {
-				compatible = "atmel,24c04";
-				pagesize = <16>;
-				reg = <0x50>;
-			};
-		};
-
-		pinctrl: pin-controller@10000 {
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp14";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power push button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-fail {
-			label = "laplug_v2:red:power";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		blue-power {
-			label = "laplug_v2:blue:power";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power_back1: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power Back 1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb_power_back2: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "USB Power Back 2";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb_power_front: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "USB Power Front";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	/* Total size : 512MB */
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0 0x100000>; /* 1MB */
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x100000 0x1000000>; /* 16MB */
-	};
-
-	partition@1100000 {
-		label = "rootfs";
-		reg = <0x1100000 0x1EF00000>; /* 495MB */
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
deleted file mode 100644
index 377b6e970259f..0000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree common file for kirkwood-6282 based Buffalo Linkstation
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-linkstation.dtsi"
-
-/ {
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd0: pmx-power-hdd0 {
-				marvell,pins = "mpp8";
-				marvell,function = "gpio";
-			};
-			pmx_usb_vbus: pmx-usb-vbus {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-			pmx_fan_high: pmx-fan-high {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-			pmx_fan_low: pmx-fan-low {
-				marvell,pins = "mpp17";
-				marvell,function = "gpio";
-			};
-			pmx_led_alarm: pmx-led-alarm {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_red: pmx-led-function-red {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_led_info: pmx-led-info {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_blue: pmx-led-function-blue {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_fan_lock: pmx-fan-lock {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_button_function: pmx-button-function {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_power_switch: pmx-power-switch {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_power_auto_switch: pmx-power-auto-switch {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_keys {
-		function-button {
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-
-		power-on-switch {
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-
-		power-auto-switch {
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds {
-		red-alarm-led {
-			label = "linkstation:red:alarm";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-function-led {
-			label = "linkstation:red:function";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		amber-info-led {
-			label = "linkstation:amber:info";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		blue-function-led {
-			label = "linkstation:blue:function";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		blue-power-led {
-			label = "linkstation:blue:power";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
-		pinctrl-names = "default";
-
-		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
-			 &gpio0 16 GPIO_ACTIVE_LOW>;
-
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
-
-		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators {
-		usb_power: regulator@1 {
-			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		hdd_power0: regulator@2 {
-			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
deleted file mode 100644
index ba629e02ba31a..0000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-linkstation.dtsi"
-
-/ {
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd0: pmx-power-hdd0 {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_power_hdd1: pmx-power-hdd1 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_usb_vbus: pmx-usb-vbus {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_led_alarm: pmx-led-alarm {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_red: pmx-led-function-red {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_blue: pmx-led-function-blue {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_led_info: pmx-led-info {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_button_function: pmx-button-function {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_power_switch: pmx-power-switch {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_power_auto_switch: pmx-power-auto-switch {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-		};
-
-		sata@80000 {
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_keys {
-		function-button {
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		power-on-switch {
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-
-		power-auto-switch {
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds {
-		red-alarm-led {
-			label = "linkstation:red:alarm";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		};
-
-		red-function-led {
-			label = "linkstation:red:function";
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		amber-info-led {
-			label = "linkstation:amber:info";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		blue-function-led {
-			label = "linkstation:blue:function";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-
-		blue-power-led {
-			label = "linkstation:blue:power";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-
-	regulators {
-		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
-
-		usb_power: regulator@1 {
-			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		hdd_power0: regulator@2 {
-			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-
-		hdd_power1: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "HDD1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy1: ethernet-phy@8 {
-		device_type = "ethernet-phy";
-		reg = <8>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
deleted file mode 100644
index 8bb3810889106..0000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Buffalo Linkstation LS-QVL
- *
- * Copyright (C) 2016, Mario Lange <mario_lange@gmx.net>
- *
- * Based on kirkwood-linkstation-lswvl.dts,
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- */
-
-/dts-v1/;
-#include "kirkwood-linkstation-6282.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-QVL";
-	compatible = "buffalo,lsqvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory { /* 256 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd1: pmx-power-hdd1 {
-				marvell,pins = "mpp9";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr0: pmx-led-hdderr0 {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr1: pmx-led-hdderr1 {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr2: pmx-led-hdderr2 {
-				marvell,pins = "mpp24";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr3: pmx-led-hdderr3 {
-				marvell,pins = "mpp25";
-				marvell,function = "gpio";
-			};
-		};
-
-		sata@80000 {
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_leds {
-		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
-			     &pmx_led_info &pmx_led_power
-			     &pmx_led_function_blue
-			     &pmx_led_hdderr0
-			     &pmx_led_hdderr1
-			     &pmx_led_hdderr2
-			     &pmx_led_hdderr3>;
-
-		red-hdderr0-led {
-			label = "linkstation:red:hdderr0";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		red-hdderr1-led {
-			label = "linkstation:red:hdderr1";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		};
-
-		red-hdderr2-led {
-			label = "linkstation:red:hdderr2";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		red-hdderr3-led {
-			label = "linkstation:red:hdderr3";
-			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	regulators {
-		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
-
-		hdd_power1: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "HDD1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
deleted file mode 100644
index 3f2a0bfe03edd..0000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Buffalo Linkstation LS-VL
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- */
-
-/dts-v1/;
-#include "kirkwood-linkstation-6282.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-VL";
-	compatible = "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory { /* 256 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
deleted file mode 100644
index c42d0da38fe7d..0000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Buffalo Linkstation LS-WSXL
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- */
-
-/dts-v1/;
-#include "kirkwood-linkstation-duo-6281.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-WSXL";
-	compatible = "buffalo,lswsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
deleted file mode 100644
index e0f62adc0d5da..0000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Buffalo Linkstation LS-WVL
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- */
-
-/dts-v1/;
-#include "kirkwood-linkstation-6282.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-WVL";
-	compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory { /* 256 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd1: pmx-power-hdd1 {
-				marvell,pins = "mpp9";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr0: pmx-led-hdderr0 {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr1: pmx-led-hdderr1 {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-		};
-
-		sata@80000 {
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_leds {
-		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
-			     &pmx_led_info &pmx_led_power
-			     &pmx_led_function_blue
-			     &pmx_led_hdderr0
-			     &pmx_led_hdderr1>;
-
-		red-hdderr0-led {
-			label = "linkstation:red:hdderr0";
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-hdderr1-led {
-			label = "linkstation:red:hdderr1";
-			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators {
-		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
-
-		hdd_power1: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "HDD1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
deleted file mode 100644
index c6024b569423a..0000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Buffalo Linkstation LS-WXL
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- */
-
-/dts-v1/;
-#include "kirkwood-linkstation-duo-6281.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-WXL";
-	compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_hdderr0: pmx-led-hdderr0 {
-				marvell,pins = "mpp8";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr1: pmx-led-hdderr1 {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_fan_lock: pmx-fan-lock {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_fan_high: pmx-fan-high {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_fan_low: pmx-fan-low {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_leds {
-		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
-			     &pmx_led_info &pmx_led_power
-			     &pmx_led_function_blue
-			     &pmx_led_hdderr0
-			     &pmx_led_hdderr1>;
-
-		red-hdderr0-led {
-			label = "linkstation:red:hdderr0";
-			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-hdderr1-led {
-			label = "linkstation:red:hdderr1";
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
-		pinctrl-names = "default";
-
-		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
-			 &gpio1 15 GPIO_ACTIVE_LOW>;
-
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
-
-		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
deleted file mode 100644
index b54c9980f636b..0000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree common file for kirkwood based Buffalo Linkstation
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- */
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd0: pmx-power-hdd0 {
-				marvell,function = "gpio";
-			};
-			pmx_usb_vbus: pmx-usb-vbus {
-				marvell,function = "gpio";
-			};
-			pmx_led_alarm: pmx-led-alarm {
-				marvell,function = "gpio";
-			};
-			pmx_led_function_red: pmx-led-function-red {
-				marvell,function = "gpio";
-			};
-			pmx_led_function_blue: pmx-led-function-blue {
-				marvell,function = "gpio";
-			};
-			pmx_led_info: pmx-led-info {
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,function = "gpio";
-			};
-			pmx_button_function: pmx-button-function {
-				marvell,function = "gpio";
-			};
-			pmx_power_switch: pmx-power-switch {
-				marvell,function = "gpio";
-			};
-			pmx_power_auto_switch: pmx-power-auto-switch {
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p40@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p40", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <25000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x60000>;
-					label = "uboot";
-					read-only;
-				};
-
-				partition@60000 {
-					reg = <0x60000 0x10000>;
-					label = "dtb";
-					read-only;
-				};
-
-				partition@70000 {
-					reg = <0x70000 0x10000>;
-					label = "uboot_env";
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_function &pmx_power_switch
-			     &pmx_power_auto_switch>;
-		pinctrl-names = "default";
-
-		function-button {
-			label = "Function Button";
-			linux,code = <KEY_OPTION>;
-		};
-
-		power-on-switch {
-			label = "Power-on Switch";
-			linux,code = <KEY_RESERVED>;
-			linux,input-type = <5>;
-		};
-
-		power-auto-switch {
-			label = "Power-auto Switch";
-			linux,code = <KEY_ESC>;
-			linux,input-type = <5>;
-		};
-	};
-
-	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
-			     &pmx_led_info &pmx_led_power
-			     &pmx_led_function_blue>;
-		pinctrl-names = "default";
-	};
-
-	restart_poweroff {
-		compatible = "restart-poweroff";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_hdd0 &pmx_usb_vbus>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		hdd_power0: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "HDD0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
deleted file mode 100644
index 27fd6e2337d55..0000000000000
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ /dev/null
@@ -1,241 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * kirkwood-viper.dts - Device Tree file for Linksys viper (E4200v2 / EA4500)
- *
- * (c) 2013 Jonas Gorski <jogo@openwrt.org>
- * (c) 2013 Deutsche Telekom Innovation Laboratories
- * (c) 2014 Luka Perkov <luka@openwrt.org>
- * (c) 2014 Randy C. Will <randall.will@gmail.com>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Linksys Viper (E4200v2 / EA4500)";
-	compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-		pinctrl-names = "default";
-
-		wps {
-			label = "WPS Button";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-
-		reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
-		pinctrl-names = "default";
-
-		white-health {
-			label = "viper:white:health";
-			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		white-pulse {
-			label = "viper:white:pulse";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pinctrl {
-	pmx_led_white_health: pmx-led-white-health {
-		marvell,pins = "mpp7";
-		marvell,function = "gpo";
-	};
-	pmx_led_white_pulse: pmx-led-white-pulse {
-		marvell,pins = "mpp14";
-		marvell,function = "gpio";
-	};
-	pmx_btn_wps: pmx-btn-wps {
-		marvell,pins = "mpp47";
-		marvell,function = "gpio";
-	};
-	pmx_btn_reset: pmx-btn-reset {
-		marvell,pins = "mpp48";
-		marvell,function = "gpio";
-	};
-};
-
-&nand {
-	status = "okay";
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
-
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@80000 {
-			label = "u_env";
-			reg = <0x80000 0x20000>;
-		};
-
-		partition@a0000 {
-			label = "s_env";
-			reg = <0xA0000 0x20000>;
-		};
-
-		partition@200000 {
-			label = "kernel";
-			reg = <0x200000 0x2A0000>;
-		};
-
-		partition@4a0000 {
-			label = "rootfs";
-			reg = <0x4A0000 0x1760000>;
-		};
-
-		partition@1c00000 {
-			label = "alt_kernel";
-			reg = <0x1C00000 0x2A0000>;
-		};
-
-		partition@1ea0000 {
-			label = "alt_rootfs";
-			reg = <0x1EA0000 0x1760000>;
-		};
-
-		partition@3600000 {
-			label = "syscfg";
-			reg = <0x3600000 0x4A00000>;
-		};
-
-		partition@c0000 {
-			label = "unused";
-			reg = <0xC0000 0x140000>;
-		};
-
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&mdio {
-	status = "okay";
-
-	switch@10 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <16>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "ethernet1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "ethernet2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "ethernet3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "ethernet4";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "internet";
-			};
-
-			port@5 {
-				reg = <5>;
-				phy-mode = "rgmii-id";
-				ethernet = <&eth0port>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
- * fixed speed and duplex.
- */
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		speed = <1000>;
-		duplex = <1>;
-		phy-mode = "rgmii";
-	};
-};
-
-/* eth1 is connected to the switch at port 6. However DSA only supports a
- * single CPU port. So leave this port disabled to avoid confusion.
- */
-&eth1 {
-	status = "disabled";
-};
-
-/* There is no battery on the board, so the RTC does not keep
- * time when there is no power, making it useless.
- */
-&rtc {
-	status = "disabled";
-};
-
diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts
deleted file mode 100644
index 1d737d903f5f7..0000000000000
--- a/arch/arm/boot/dts/kirkwood-lschlv2.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood-lsxl.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-CHLv2";
-	compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts
deleted file mode 100644
index a56e0d797778c..0000000000000
--- a/arch/arm/boot/dts/kirkwood-lsxhl.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood-lsxl.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-XHL";
-	compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
deleted file mode 100644
index 88b70ba1c8fee..0000000000000
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ /dev/null
@@ -1,231 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			/* Non-default UART pins */
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp4", "mpp5";
-			};
-
-			pmx_power_hdd: pmx-power-hdd {
-				marvell,pins = "mpp10";
-				marvell,function = "gpo";
-			};
-			pmx_usb_vbus: pmx-usb-vbus {
-				marvell,pins = "mpp11";
-				marvell,function = "gpio";
-			};
-			pmx_fan_high: pmx-fan-high {
-				marvell,pins = "mpp18";
-				marvell,function = "gpo";
-			};
-			pmx_fan_low: pmx-fan-low {
-				marvell,pins = "mpp19";
-				marvell,function = "gpo";
-			};
-			pmx_led_function_blue: pmx-led-function-blue {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_led_alarm: pmx-led-alarm {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_led_info: pmx-led-info {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_fan_lock: pmx-fan-lock {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_button_function: pmx-button-function {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_power_switch: pmx-power-switch {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_power_auto_switch: pmx-power-auto-switch {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_red: pmx-led-function_red {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-
-		};
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p40@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p40", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <25000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x60000>;
-					label = "uboot";
-					read-only;
-				};
-
-				partition@60000 {
-					reg = <0x60000 0x10000>;
-					label = "dtb";
-					read-only;
-				};
-
-				partition@70000 {
-					reg = <0x70000 0x10000>;
-					label = "uboot_env";
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_function &pmx_power_switch
-			     &pmx_power_auto_switch>;
-		pinctrl-names = "default";
-
-		option {
-			label = "Function Button";
-			linux,code = <KEY_OPTION>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-		reserved {
-			label = "Power-on Switch";
-			linux,code = <KEY_RESERVED>;
-			linux,input-type = <5>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-		power {
-			label = "Power-auto Switch";
-			linux,code = <KEY_ESC>;
-			linux,input-type = <5>;
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
-			     &pmx_led_info &pmx_led_power
-			     &pmx_led_function_blue>;
-		pinctrl-names = "default";
-
-		func_blue {
-			label = "lsxl:blue:func";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-
-		alarm {
-			label = "lsxl:red:alarm";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-
-		info {
-			label = "lsxl:amber:info";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		power {
-			label = "lsxl:blue:power";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		func_red {
-			label = "lsxl:red:func";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
-		         &gpio0 18 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    3
-		                      1500 2
-		                      3250 1
-		                      5000 0>;
-		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-	};
-
-	restart_poweroff {
-		compatible = "restart-poweroff";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 11 0>;
-		};
-		hdd_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "HDD Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 10 0>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy1: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
deleted file mode 100644
index e87ea71465462..0000000000000
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ /dev/null
@@ -1,216 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "MPL CEC4";
-	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_health: pmx-led-health {
-				marvell,pins = "mpp7";
-				marvell,function = "gpo";
-			};
-
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp34";
-				marvell,function = "sata1";
-			};
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp35";
-				marvell,function = "sata0";
-			};
-
-			pmx_led_user1o: pmx-led-user1o {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_user1g: pmx-led-user1g {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_user0o: pmx-led-user0o {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_user0g: pmx-led-user0g {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_misc: pmx-led-misc {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-
-			eeprom@57 {
-				compatible = "atmel,24c02";
-				reg = <0x57>;
-			};
-
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		rtc@10300 {
-			status = "disabled";
-		};
-
-		sata@80000 {
-			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-			pinctrl-names = "default";
-			nr-ports = <2>;
-			status = "okay";
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
-			pinctrl-names = "default";
-			status = "okay";
-			cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			/* No WP GPIO */
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_health
-			      &pmx_led_user1o
-			      &pmx_led_user1g &pmx_led_user0o
-			      &pmx_led_user0g &pmx_led_misc
-			    >;
-		pinctrl-names = "default";
-
-		health {
-			label = "status:green:health";
-			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		};
-
-		user1o {
-			label = "user1:orange";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		user1g {
-			label = "user1:green";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		user0o {
-			label = "user0:orange";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		user0g {
-			label = "user0:green";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		misc {
-			label = "status:orange:misc";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0000000 0x100000>;
-	};
-
-	partition@100000 {
-		label = "env";
-		reg = <0x100000 0x80000>;
-	};
-
-	partition@180000 {
-		label = "fdt";
-		reg = <0x180000 0x80000>;
-	};
-
-	partition@200000 {
-		label = "kernel";
-		reg = <0x200000 0x400000>;
-	};
-
-	partition@600000 {
-		label = "rootfs";
-		reg = <0x600000 0x1fa00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@1 {
-		reg = <1>;
-	};
-
-	ethphy1: ethernet-phy@2 {
-		reg = <2>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
deleted file mode 100644
index 5a77286136c72..0000000000000
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell 88F6281 GTW GE Board
- *
- * Lennert Buytenhek <buytenh@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file contains the definitions that are common between the 6281
- * and 6282 variants of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Marvell 88F6281 GTW GE Board";
-	compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pin-controller@10000 {
-			pmx_usb_led: pmx-usb-led {
-				marvell,pins = "mpp12";
-				marvell,function = "gpo";
-			};
-
-			pmx_leds: pmx-leds {
-				marvell,pins = "mpp20", "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_keys: pmx-keys {
-				marvell,pins = "mpp46", "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <50000000>;
-				mode = <0>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		ehci@50000 {
-			status = "okay";
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
-		pinctrl-names = "default";
-
-		green-status {
-			label = "gtw:green:Status";
-			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-status {
-			label = "gtw:red:Status";
-			gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-		};
-
-		green-usb {
-			label = "gtw:green:USB";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_keys>;
-		pinctrl-names = "default";
-
-		restart {
-			label = "SWR Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		wps {
-			label = "WPS Button";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	switch@0 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-
-			port@5 {
-				reg = <5>;
-				phy-mode = "rgmii-id";
-				ethernet = <&eth0port>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		speed = <1000>;
-		duplex = <1>;
-		phy-mode = "rgmii";
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts
deleted file mode 100644
index 0b0a15093146b..0000000000000
--- a/arch/arm/boot/dts/kirkwood-nas2big.dts
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for LaCie 2Big NAS
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Simon Guinot <simon.guinot@sequanux.org>
- *
-*/
-
-/dts-v1/;
-
-#include "kirkwood-netxbig.dtsi"
-
-/ {
-	model = "LaCie 2Big NAS";
-	compatible = "lacie,nas2big", "lacie,netxbig", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		rtc@10300 {
-			/* The on-chip RTC is not powered (no supercap). */
-			status = "disabled";
-		};
-		spi@10600 {
-			/*
-			 * A NAND flash is used instead of an SPI flash for
-			 * the other netxbig-compatible boards.
-			 */
-			status = "disabled";
-		};
-	};
-
-	fan {
-		/*
-		 * An I2C fan controller (GMT G762) is used but alarm is
-		 * wired to a separate GPIO.
-		 */
-		compatible = "gpio-fan";
-		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-	};
-
-	regulators: regulators {
-		status = "okay";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdd1power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-		};
-		clocks {
-			g762_clk: g762-oscillator {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <32768>;
-			};
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	/*
-	 * An external I2C RTC (Dallas DS1337S+) is used. This allows
-	 * to power-up the board on an RTC alarm. The external RTC can
-	 * be kept powered, even when the SoC is off.
-	 */
-	rtc@68 {
-		compatible = "dallas,ds1307";
-		reg = <0x68>;
-		interrupts = <43>;
-	};
-	g762@3e {
-		compatible = "gmt,g762";
-		reg = <0x3e>;
-		clocks = <&g762_clk>;
-	};
-};
-
-&nand {
-	chip-delay = <50>;
-	status = "okay";
-
-	partition@0 {
-		label = "U-Boot";
-		reg = <0x0 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x100000 0x1000000>;
-	};
-
-	partition@1100000 {
-		label = "root";
-		reg = <0x1100000 0x8000000>;
-	};
-
-	partition@9100000 {
-		label = "unused";
-		reg = <0x9100000 0x6f00000>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts
deleted file mode 100644
index d5f6bb50ba114..0000000000000
--- a/arch/arm/boot/dts/kirkwood-net2big.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for LaCie 2Big Network v2
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * Based on netxbig_v2-setup.c,
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
-*/
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-netxbig.dtsi"
-
-/ {
-	model = "LaCie 2Big Network v2";
-	compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	fan {
-		compatible = "gpio-fan";
-		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&regulators {
-	regulator@2 {
-		compatible = "regulator-fixed";
-		reg = <2>;
-		regulator-name = "hdd1power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-
-	clocks {
-		g762_clk: g762-oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-};
-
-&i2c0 {
-	g762@3e {
-		compatible = "gmt,g762";
-		reg = <0x3e>;
-		clocks = <&g762_clk>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
deleted file mode 100644
index 2497ad26b5b63..0000000000000
--- a/arch/arm/boot/dts/kirkwood-net5big.dts
+++ /dev/null
@@ -1,169 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for LaCie 5Big Network v2
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * Based on netxbig_v2-setup.c,
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
-*/
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-netxbig.dtsi"
-
-/ {
-	model = "LaCie 5Big Network v2";
-	compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-};
-
-&regulators {
-	regulator@2 {
-		compatible = "regulator-fixed";
-		reg = <2>;
-		regulator-name = "hdd1power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulator@3 {
-		compatible = "regulator-fixed";
-		reg = <3>;
-		regulator-name = "hdd2power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulator@4 {
-		compatible = "regulator-fixed";
-		reg = <4>;
-		regulator-name = "hdd3power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulator@5 {
-		compatible = "regulator-fixed";
-		reg = <5>;
-		regulator-name = "hdd4power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	clocks {
-		g762_clk: g762-oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	netxbig-leds {
-		blue-sata2 {
-			label = "netxbig:blue:sata2";
-			mode-addr = <5>;
-			mode-val = <NETXBIG_LED_OFF 0
-				    NETXBIG_LED_ON 7
-				    NETXBIG_LED_SATA 1
-				    NETXBIG_LED_TIMER1 3>;
-			bright-addr = <2>;
-			max-brightness = <7>;
-		};
-		red-sata2 {
-			label = "netxbig:red:sata2";
-			mode-addr = <5>;
-			mode-val = <NETXBIG_LED_OFF 0
-				    NETXBIG_LED_ON 2
-				    NETXBIG_LED_TIMER1 4>;
-			bright-addr = <2>;
-			max-brightness = <7>;
-		};
-		blue-sata3 {
-			label = "netxbig:blue:sata3";
-			mode-addr = <6>;
-			mode-val = <NETXBIG_LED_OFF 0
-				    NETXBIG_LED_ON 7
-				    NETXBIG_LED_SATA 1
-				    NETXBIG_LED_TIMER1 3>;
-			bright-addr = <2>;
-			max-brightness = <7>;
-		};
-		red-sata3 {
-			label = "netxbig:red:sata3";
-			mode-addr = <6>;
-			mode-val = <NETXBIG_LED_OFF 0
-				    NETXBIG_LED_ON 2
-				    NETXBIG_LED_TIMER1 4>;
-			bright-addr = <2>;
-			max-brightness = <7>;
-		};
-		blue-sata4 {
-			label = "netxbig:blue:sata4";
-			mode-addr = <7>;
-			mode-val = <NETXBIG_LED_OFF 0
-				    NETXBIG_LED_ON 7
-				    NETXBIG_LED_SATA 1
-				    NETXBIG_LED_TIMER1 3>;
-			bright-addr = <2>;
-			max-brightness = <7>;
-		};
-		red-sata4 {
-			label = "netxbig:red:sata4";
-			mode-addr = <7>;
-			mode-val = <NETXBIG_LED_OFF 0
-				    NETXBIG_LED_ON 2
-				    NETXBIG_LED_TIMER1 4>;
-			bright-addr = <2>;
-			max-brightness = <7>;
-		};
-	};
-};
-
-&mdio {
-	ethphy1: ethernet-phy@1 {
-		reg = <0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
-
-
-&i2c0 {
-	g762@3e {
-		compatible = "gmt,g762";
-		reg = <0x3e>;
-		clocks = <&g762_clk>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
deleted file mode 100644
index cb564c3bcdc43..0000000000000
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ /dev/null
@@ -1,247 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for NETGEAR ReadyNAS Duo v2
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS Duo v2";
-	compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory { /* 256 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-
-			pmx_button_backup: pmx-button-backup {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_power: pmx-led-blue-power {
-				marvell,pins = "mpp31";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_activity: pmx-led-blue-activity {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk1: pmx-led-blue-disk1 {
-				marvell,pins = "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk2: pmx-led-blue-disk2 {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_backup: pmx-led-blue-backup {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_poweroff: pmx-poweroff {
-				marvell,pins = "mpp30";
-				marvell,function = "gpio";
-			};
-		};
-
-		clocks {
-		       g762_clk: g762-oscillator {
-				 compatible = "fixed-clock";
-				 #clock-cells = <0>;
-				 clock-frequency = <8192>;
-		       };
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			rs5c372a: rs5c372a@32 {
-				compatible = "ricoh,rs5c372a";
-				reg = <0x32>;
-			};
-
-			g762: g762@3e {
-				compatible = "gmt,g762";
-				reg = <0x3e>;
-				clocks = <&g762_clk>; /* input clock */
-				fan_gear_mode = <0>;
-				fan_startv = <1>;
-				pwm_polarity = <0>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_activity
-			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
-			      &pmx_led_blue_backup >;
-		pinctrl-names = "default";
-
-		power_led {
-			label = "status:blue:power_led";
-			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		activity_led {
-			label = "status:blue:activity_led";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		disk1_led {
-			label = "status:blue:disk1_led";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-
-		disk2_led {
-			label = "status:blue:disk2_led";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		};
-
-		backup_led {
-			label = "status:blue:backup_led";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_button_power &pmx_button_backup
-			     &pmx_button_reset>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		};
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb3_regulator: usb3-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB 3.0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x180000>;
-		read-only;
-	};
-
-	partition@180000 {
-		label = "u-boot-env";
-		reg = <0x180000 0x20000>;
-	};
-
-	partition@200000 {
-		label = "uImage";
-		reg = <0x0200000 0x600000>;
-	};
-
-	partition@800000 {
-		label = "minirootfs";
-		reg = <0x0800000 0x1000000>;
-	};
-
-	partition@1800000 {
-		label = "jffs2";
-		reg = <0x1800000 0x6800000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&pciec {
-        status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
deleted file mode 100644
index 6cf76430cfabd..0000000000000
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
+++ /dev/null
@@ -1,274 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for NETGEAR ReadyNAS NV+ v2
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS NV+ v2";
-	compatible = "netgear,readynas-nv+-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory { /* 256 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-
-			pmx_button_backup: pmx-button-backup {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_power: pmx-led-blue-power {
-				marvell,pins = "mpp31";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_backup: pmx-led-blue-backup {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk1: pmx-led-blue-disk1 {
-				marvell,pins = "mpp20";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk2: pmx-led-blue-disk2 {
-				marvell,pins = "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk3: pmx-led-blue-disk3 {
-				marvell,pins = "mpp24";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk4: pmx-led-blue-disk4 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_poweroff: pmx-poweroff {
-				marvell,pins = "mpp30";
-				marvell,function = "gpio";
-			};
-		};
-
-		clocks {
-			g762_clk: g762-oscillator {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <8192>;
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			rs5c372a: rs5c372a@32 {
-				compatible = "ricoh,rs5c372a";
-				reg = <0x32>;
-			};
-
-			g762: g762@3e {
-				compatible = "gmt,g762";
-				reg = <0x3e>;
-				clocks = <&g762_clk>; /* input clock */
-				fan_gear_mode = <0>;
-				fan_startv = <1>;
-				pwm_polarity = <0>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 { /* Connected to Marvell 88SM4140 SATA port multiplier */
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	auxdisplay {
-		compatible = "hit,hd44780";
-		data-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>,
-				<&gpio1 1 GPIO_ACTIVE_HIGH>,
-				<&gpio1 3 GPIO_ACTIVE_HIGH>,
-				<&gpio1 17 GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		rs-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		rw-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		backlight-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		display-height-chars = <2>;
-		display-width-chars = <16>;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup
-			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
-			      &pmx_led_blue_disk3 &pmx_led_blue_disk3 >;
-		pinctrl-names = "default";
-
-		power_led {
-			label = "status:blue:power_led";
-			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		backup_led {
-			label = "status:blue:backup_led";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		};
-
-		disk1_led {
-			label = "status:blue:disk1_led";
-			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-		};
-
-		disk2_led {
-			label = "status:blue:disk2_led";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-
-		disk3_led {
-			label = "status:blue:disk3_led";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		disk4_led {
-			label = "status:blue:disk4_led";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_button_power &pmx_button_backup
-			     &pmx_button_reset>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		};
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb3_regulator: usb3-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB 3.0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x180000>;
-		read-only;
-	};
-
-	partition@180000 {
-		label = "u-boot-env";
-		reg = <0x180000 0x20000>;
-	};
-
-	partition@200000 {
-		label = "uImage";
-		reg = <0x0200000 0x600000>;
-	};
-
-	partition@800000 {
-		label = "minirootfs";
-		reg = <0x0800000 0x1000000>;
-	};
-
-	partition@1800000 {
-		label = "jffs2";
-		reg = <0x1800000 0x6800000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		device_type = "ethernet-phy";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-/* Connected to NEC uPD720200 USB 3.0 controller */
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
deleted file mode 100644
index b5737026e244d..0000000000000
--- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree common file for LaCie 2Big and 5Big Network v2
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * Based on netxbig_v2-setup.c,
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
-*/
-
-#include <dt-bindings/leds/leds-netxbig.h>
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-			};
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/*
-		 * esc and power represent a three position rocker
-		 * switch. Thus the conventional KEY_POWER does not fit
-		 */
-		exc {
-			label = "Back power switch (on|auto)";
-			linux,code = <KEY_ESC>;
-			linux,input-type = <5>;
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		};
-		power {
-			label = "Back power switch (auto|off)";
-			linux,code = <KEY_1>;
-			linux,input-type = <5>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-		option {
-			label = "Function button";
-			linux,code = <KEY_OPTION>;
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators: regulators {
-		status = "okay";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd0power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	netxbig_gpio_ext: netxbig-gpio-ext {
-		compatible = "lacie,netxbig-gpio-ext";
-
-		addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
-			      &gpio1 16 GPIO_ACTIVE_HIGH
-			      &gpio1 17 GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
-			      &gpio1 13 GPIO_ACTIVE_HIGH
-			      &gpio1 14 GPIO_ACTIVE_HIGH>;
-		enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-	};
-
-	netxbig-leds {
-		compatible = "lacie,netxbig-leds";
-
-		gpio-ext = <&netxbig_gpio_ext>;
-
-		timers = <NETXBIG_LED_TIMER1 500 500
-			  NETXBIG_LED_TIMER2 500 1000>;
-
-		blue-power {
-			label = "netxbig:blue:power";
-			mode-addr = <0>;
-			mode-val = <NETXBIG_LED_OFF 0
-				    NETXBIG_LED_ON 1
-				    NETXBIG_LED_TIMER1 3
-				    NETXBIG_LED_TIMER2 7>;
-			bright-addr = <1>;
-			max-brightness = <7>;
-		};
-		red-power {
-			label = "netxbig:red:power";
-			mode-addr = <0>;
-			mode-val = <NETXBIG_LED_OFF 0
-				    NETXBIG_LED_ON 2
-				    NETXBIG_LED_TIMER1 4>;
-			bright-addr = <1>;
-			max-brightness = <7>;
-		};
-		blue-sata0 {
-			label = "netxbig:blue:sata0";
-			mode-addr = <3>;
-			mode-val = <NETXBIG_LED_OFF 0
-				    NETXBIG_LED_ON 7
-				    NETXBIG_LED_SATA 1
-				    NETXBIG_LED_TIMER1 3>;
-			bright-addr = <2>;
-			max-brightness = <7>;
-		};
-		red-sata0 {
-			label = "netxbig:red:sata0";
-			mode-addr = <3>;
-			mode-val = <NETXBIG_LED_OFF 0
-				    NETXBIG_LED_ON 2
-				    NETXBIG_LED_TIMER1 4>;
-			bright-addr = <2>;
-			max-brightness = <7>;
-		};
-		blue-sata1 {
-			label = "netxbig:blue:sata1";
-			mode-addr = <4>;
-			mode-val = <NETXBIG_LED_OFF 0
-				    NETXBIG_LED_ON 7
-				    NETXBIG_LED_SATA 1
-				    NETXBIG_LED_TIMER1 3>;
-			bright-addr = <2>;
-			max-brightness = <7>;
-		};
-		red-sata1 {
-			label = "netxbig:red:sata1";
-			mode-addr = <4>;
-			mode-val = <NETXBIG_LED_OFF 0
-				    NETXBIG_LED_ON 2
-				    NETXBIG_LED_TIMER1 4>;
-			bright-addr = <2>;
-			max-brightness = <7>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <8>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-
-	pmx_button_function: pmx-button-function {
-		marvell,pins = "mpp34";
-		marvell,function = "gpio";
-	};
-	pmx_button_power_off: pmx-button-power-off {
-		marvell,pins = "mpp15";
-		marvell,function = "gpio";
-	};
-	pmx_button_power_on: pmx-button-power-on {
-		marvell,pins = "mpp13";
-		marvell,function = "gpio";
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c04";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
deleted file mode 100644
index 51530ea86622a..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_ns2_sata0: pmx-ns2-sata0 {
-				marvell,pins = "mpp21";
-				marvell,function = "sata0";
-			};
-			pmx_ns2_sata1: pmx-ns2-sata1 {
-				marvell,pins = "mpp20";
-				marvell,function = "sata1";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			eeprom@50 {
-				compatible = "atmel,24c04";
-				pagesize = <16>;
-				reg = <0x50>;
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		power {
-			label = "Power push button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-fail {
-			label = "ns2:red:fail";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-	};
-
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@X {
-                /* overwrite reg property in board file */
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
deleted file mode 100644
index 7b67083e1ec01..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/leds/leds-ns2.h>
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	model = "LaCie Network Space v2";
-	compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			slow-gpio = <&gpio0 29 0>;
-			cmd-gpio = <&gpio0 30 0>;
-			modes-map = <NS_V2_LED_OFF  1 0
-				     NS_V2_LED_ON   0 1
-				     NS_V2_LED_ON   1 1
-				     NS_V2_LED_SATA 0 0>;
-		};
-	};
-};
-
-&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
deleted file mode 100644
index b0cb5907ed63f..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	model = "LaCie Network Space Lite v2";
-	compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "disk-activity";
-		};
-	};
-};
-
-&ethphy0 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
deleted file mode 100644
index c0a087e774084..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/leds/leds-ns2.h>
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	model = "LaCie Network Space Max v2";
-	compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0 &pmx_ns2_sata1>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
-			 &gpio0  7 GPIO_ACTIVE_LOW
-			 &gpio1  1 GPIO_ACTIVE_LOW
-			 &gpio0 23 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map =
-			<   0  0
-			 1500 15
-			 1700 14
-			 1800 13
-			 2100 12
-			 3100 11
-			 3300 10
-			 4300  9
-			 5500  8>;
-		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			slow-gpio = <&gpio0 29 0>;
-			cmd-gpio = <&gpio0 30 0>;
-			modes-map = <NS_V2_LED_OFF  1 0
-				     NS_V2_LED_ON   0 1
-				     NS_V2_LED_ON   1 1
-				     NS_V2_LED_SATA 0 0>;
-		};
-	};
-};
-
-&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
deleted file mode 100644
index 5b9fa14b64286..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/leds/leds-ns2.h>
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	/* This machine is embedded in the first LaCie CloudBox product. */
-	model = "LaCie Network Space Mini v2";
-	compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
-			 &gpio0  7 GPIO_ACTIVE_LOW
-			 &gpio1  1 GPIO_ACTIVE_LOW
-			 &gpio0 23 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map =
-			<   0  0
-			 3000 15
-			 3180 14
-			 4140 13
-			 4570 12
-			 6760 11
-			 7140 10
-			 7980  9
-			 9200  8>;
-		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			slow-gpio = <&gpio0 29 0>;
-			cmd-gpio = <&gpio0 30 0>;
-			modes-map = <NS_V2_LED_OFF  1 0
-				     NS_V2_LED_ON   0 1
-				     NS_V2_LED_ON   1 1
-				     NS_V2_LED_SATA 0 0>;
-		};
-	};
-};
-
-&ethphy0 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
deleted file mode 100644
index c1799a07816ef..0000000000000
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/ {
-	compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_unknown>;
-			pinctrl-names = "default";
-
-			pmx_led_esata_green: pmx-led-esata-green {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_esata_red: pmx-led-esata-red {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_green: pmx-led-usb-green {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_red: pmx-led-usb-red {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_green: pmx-led-sys-green {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_red: pmx-led-sys-red {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_green: pmx-led-hdd-green {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_red: pmx-led-hdd-red {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-			pmx_unknown: pmx-unknown {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			adt7476: adt7476a@2e {
-				compatible = "adi,adt7476";
-				reg = <0x2e>;
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red
-			     &pmx_led_usb_green &pmx_led_usb_red
-			     &pmx_led_sys_green &pmx_led_sys_red
-			     &pmx_led_copy_green &pmx_led_copy_red
-			     &pmx_led_hdd_green &pmx_led_hdd_red>;
-		pinctrl-names = "default";
-
-		green-sys {
-			label = "nsa310:green:sys";
-			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-		red-sys {
-			label = "nsa310:red:sys";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd {
-			label = "nsa310:green:hdd";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd {
-			label = "nsa310:red:hdd";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-		green-esata {
-			label = "nsa310:green:esata";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		red-esata {
-			label = "nsa310:red:esata";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-		green-usb {
-			label = "nsa310:green:usb";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-		red-usb {
-			label = "nsa310:red:usb";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		};
-		green-copy {
-			label = "nsa310:green:copy";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-		red-copy {
-			label = "nsa310:red:copy";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts
deleted file mode 100644
index b85e314f045a7..0000000000000
--- a/arch/arm/boot/dts/kirkwood-nsa310a.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/*
- * There are at least two different NSA310 designs. This variant does
- * not have the red USB Led.
- */
-
-/ {
-	compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-names = "default";
-
-			pmx_led_esata_green: pmx-led-esata-green {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_esata_red: pmx-led-esata-red {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_green: pmx-led-usb-green {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_green: pmx-led-sys-green {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_red: pmx-led-sys-red {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_green: pmx-led-hdd-green {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_red: pmx-led-hdd-red {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			lm85: lm85@2e {
-				compatible = "national,lm85";
-				reg = <0x2e>;
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		green-sys {
-			label = "nsa310:green:sys";
-			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-		red-sys {
-			label = "nsa310:red:sys";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd {
-			label = "nsa310:green:hdd";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd {
-			label = "nsa310:red:hdd";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-		green-esata {
-			label = "nsa310:green:esata";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		red-esata {
-			label = "nsa310:red:esata";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-		green-usb {
-			label = "nsa310:green:usb";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-		green-copy {
-			label = "nsa310:green:copy";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-		red-copy {
-			label = "nsa310:red:copy";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310s.dts b/arch/arm/boot/dts/kirkwood-nsa310s.dts
deleted file mode 100644
index 49da633a1bc02..0000000000000
--- a/arch/arm/boot/dts/kirkwood-nsa310s.dts
+++ /dev/null
@@ -1,259 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * ZyXEL NSA310S Board Description
- * Copyright 2020-2022 Pawel Dembicki <paweldembicki@gmail.com>
- * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
- * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
- * Based upon the board setup file created by Peter Schildmann
- */
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "ZyXEL NSA310S";
-	compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_pwr_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-
-		power {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		copy {
-			label = "Copy Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		};
-
-		reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds>;
-		pinctrl-names = "default";
-
-		led-1 {
-			function = LED_FUNCTION_DISK_ERR;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-2 {
-			function = LED_FUNCTION_USB;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "usb-host";
-		};
-
-		led-3 {
-			function = LED_FUNCTION_DISK;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "ata1";
-		};
-
-		led-4 {
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-5 {
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-6 {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-7 {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	usb0_power: regulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "USB Power";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-	};
-
-	sata1_power: regulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "SATA1 Power";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	thermal-zones {
-		disk-thermal {
-			polling-delay = <20000>;
-			polling-delay-passive = <2000>;
-
-			thermal-sensors = <&hdd_temp>;
-
-			trips {
-				disk_alert: disk-alert {
-					temperature = <40000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				disk_crit: disk-crit {
-					temperature = <60000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-};
-
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	rtc@68 {
-		compatible = "htk,ht1382";
-		reg = <0x68>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@1 {
-		reg = <1>;
-		phy-mode = "rgmii-id";
-		marvell,reg-init = <0x1 0x16 0x0 0x3>,
-				   <0x1 0x10 0x0 0x1017>,
-				   <0x1 0x11 0x0 0x4408>,
-				   <0x1 0x16 0x0 0x0>;
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <35>;
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0000000 0x00c0000>;
-		read-only;
-	};
-	partition@c0000 {
-		label = "uboot_env";
-		reg = <0x00c0000 0x0080000>;
-	};
-	partition@140000 {
-		label = "ubi";
-		reg = <0x0140000 0x7ec0000>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp24", "mpp25", "mpp26";
-		marvell,function = "gpio";
-	};
-
-	pmx_leds: pmx-leds {
-		marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23",
-						"mpp28", "mpp29";
-		marvell,function = "gpio";
-	};
-
-	pmx_power: pmx-power {
-		marvell,pins = "mpp21", "mpp33";
-		marvell,function = "gpio";
-	};
-
-	pmx_pwr_off: pmx-pwr-off {
-		marvell,pins = "mpp27";
-		marvell,function = "gpio";
-	};
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-	nr-ports = <1>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hdd_temp: sata-port@0 {
-		reg = <0>;
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts
deleted file mode 100644
index 652405e65006f..0000000000000
--- a/arch/arm/boot/dts/kirkwood-nsa320.dts
+++ /dev/null
@@ -1,219 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/* Device tree file for the Zyxel NSA 320 NAS box.
- *
- * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
- *
- *
- * Based upon the board setup file created by Peter Schildmann */
-
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/ {
-	model = "Zyxel NSA320";
-	compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-names = "default";
-
-			/* SATA Activity and Present pins are not connected */
-			pmx_sata0: pmx-sata0 {
-				marvell,pins ;
-				marvell,function = "sata0";
-			};
-
-			pmx_sata1: pmx-sata1 {
-				marvell,pins ;
-				marvell,function = "sata1";
-			};
-
-			pmx_led_hdd2_green: pmx-led-hdd2-green {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd2_red: pmx-led-hdd2-red {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_mcu_data: pmx-mcu-data {
-				marvell,pins = "mpp14";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_green: pmx-led-usb-green {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_mcu_clk: pmx-mcu-clk {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-
-			pmx_mcu_act: pmx-mcu-act {
-				marvell,pins = "mpp17";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_green: pmx-led-sys-green {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_orange: pmx-led-sys-orange {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd1_green: pmx-led-hdd1-green {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd1_red: pmx-led-hdd1-red {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-			pmx_htp: pmx-htp {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-
-			/* Buzzer needs to be switched at around 1kHz so is
-			   not compatible with the gpio-beeper driver. */
-			pmx_buzzer: pmx-buzzer {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_vid_b1: pmx-vid-b1 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_power_resume_data: pmx-power-resume-data {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-
-			pmx_power_resume_clk: pmx-power-resume-clk {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			pcf8563: pcf8563@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-	};
-
-	regulators {
-		usb0_power: regulator@1 {
-			enable-active-high;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
-			     &pmx_led_usb_green
-			     &pmx_led_sys_green &pmx_led_sys_orange
-			     &pmx_led_copy_green &pmx_led_copy_red
-			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
-		pinctrl-names = "default";
-
-		green-sys {
-			label = "nsa320:green:sys";
-			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-		orange-sys {
-			label = "nsa320:orange:sys";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd1 {
-			label = "nsa320:green:hdd1";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd1 {
-			label = "nsa320:red:hdd1";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd2 {
-			label = "nsa320:green:hdd2";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd2 {
-			label = "nsa320:red:hdd2";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-		green-usb {
-			label = "nsa320:green:usb";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-		green-copy {
-			label = "nsa320:green:copy";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-		red-copy {
-			label = "nsa320:red:copy";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	hwmon {
-		compatible = "zyxel,nsa320-mcu";
-		pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>;
-		pinctrl-names = "default";
-
-		data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-	};
-
-	/* The following pins are currently not assigned to a driver,
-	   some of them should be configured as inputs.
-	pinctrl-0 = <&pmx_htp &pmx_vid_b1
-		     &pmx_power_resume_data &pmx_power_resume_clk>; */
-};
-
-&mdio {
-	status = "okay";
-	ethphy0: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts
deleted file mode 100644
index 371456de34b27..0000000000000
--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/* Device tree file for the Zyxel NSA 325 NAS box.
- *
- * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
- *
- *
- * Based upon the board setup file created by Peter Schildmann
- */
-
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/ {
-	model = "ZyXEL NSA325";
-	compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-names = "default";
-
-			pmx_led_hdd2_green: pmx-led-hdd2-green {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd2_red: pmx-led-hdd2-red {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_mcu_data: pmx-mcu-data {
-				marvell,pins = "mpp14";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_green: pmx-led-usb-green {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_mcu_clk: pmx-mcu-clk {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-
-			pmx_mcu_act: pmx-mcu-act {
-				marvell,pins = "mpp17";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_green: pmx-led-sys-green {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_orange: pmx-led-sys-orange {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd1_green: pmx-led-hdd1-green {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd1_red: pmx-led-hdd1-red {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-			pmx_htp: pmx-htp {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-
-			/*
-			 * Buzzer needs to be switched at around 1kHz so is
-			 * not compatible with the gpio-beeper driver.
-			 */
-			pmx_buzzer: pmx-buzzer {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_vid_b1: pmx-vid-b1 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_power_resume_data: pmx-power-resume-data {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-
-			pmx_power_resume_clk: pmx-power-resume-clk {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-
-			pmx_pwr_sata1: pmx-pwr-sata1 {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-
-		/* This board uses the pcf8563 RTC instead of the SoC RTC */
-		rtc@10300 {
-			status = "disabled";
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			pcf8563: pcf8563@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_pwr_sata1>;
-		pinctrl-names = "default";
-
-		usb0_power: regulator@1 {
-			enable-active-high;
-		};
-
-		sata1_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
-			     &pmx_led_usb_green
-			     &pmx_led_sys_green &pmx_led_sys_orange
-			     &pmx_led_copy_green &pmx_led_copy_red
-			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
-		pinctrl-names = "default";
-
-		green-sys {
-			label = "nsa325:green:sys";
-			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-		orange-sys {
-			label = "nsa325:orange:sys";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd1 {
-			label = "nsa325:green:hdd1";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd1 {
-			label = "nsa325:red:hdd1";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd2 {
-			label = "nsa325:green:hdd2";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd2 {
-			label = "nsa325:red:hdd2";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-		green-usb {
-			label = "nsa325:green:usb";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-		green-copy {
-			label = "nsa325:green:copy";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-		red-copy {
-			label = "nsa325:red:copy";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-
-	/* The following pins are currently not assigned to a driver,
-	   some of them should be configured as inputs.
-	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
-		     &pmx_htp &pmx_vid_b1
-		     &pmx_power_resume_data &pmx_power_resume_clk>; */
-	};
-
-
-};
-
-&mdio {
-	status = "okay";
-	ethphy0: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
deleted file mode 100644
index ea3d36512e9f3..0000000000000
--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "ZyXEL NSA310";
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pmx_usb_power: pmx-usb-power {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_pwr_off: pmx-pwr-off {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_reset: pmx-btn-reset {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_copy: pmx-btn-copy {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_power: pmx-btn-power {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_green: pmx-led-copy-green {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_red: pmx-led-copy-red {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_pwr_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
-		pinctrl-names = "default";
-
-		power {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-		copy {
-			label = "Copy Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-		reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power>;
-		pinctrl-names = "default";
-
-		usb0_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <35>;
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0000000 0x0100000>;
-		read-only;
-	};
-	partition@100000 {
-		label = "uboot_env";
-		reg = <0x0100000 0x0080000>;
-	};
-	partition@180000 {
-		label = "key_store";
-		reg = <0x0180000 0x0080000>;
-	};
-	partition@200000 {
-		label = "info";
-		reg = <0x0200000 0x0080000>;
-	};
-	partition@280000 {
-		label = "etc";
-		reg = <0x0280000 0x0a00000>;
-	};
-	partition@c80000 {
-		label = "kernel_1";
-		reg = <0x0c80000 0x0a00000>;
-	};
-	partition@1680000 {
-		label = "rootfs1";
-		reg = <0x1680000 0x2fc0000>;
-	};
-	partition@4640000 {
-		label = "kernel_2";
-		reg = <0x4640000 0x0a00000>;
-	};
-	partition@5040000 {
-		label = "rootfs2";
-		reg = <0x5040000 0x2fc0000>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
deleted file mode 100644
index 8ea430168ea54..0000000000000
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Plat'Home OpenBlocksA6";
-	compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		serial@12100 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			nr-ports = <1>;
-			status = "okay";
-		};
-
-		i2c@11100 {
-			status = "okay";
-
-			s35390a: s35390a@30 {
-				compatible = "sii,s35390a";
-				reg = <0x30>;
-			};
-		};
-
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_dip_switches>;
-			pinctrl-names = "default";
-
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11", "mpp15",
-					"mpp16";
-				marvell,function = "uart0";
-			};
-
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14", "mpp8",
-					"mpp9";
-				marvell,function = "uart1";
-			};
-
-			pmx_sysrst: pmx-sysrst {
-				marvell,pins = "mpp6";
-				marvell,function = "sysrst";
-			};
-
-			pmx_dip_switches: pmx-dip-switches {
-				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_header: pmx-gpio-header {
-				marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27",
-					       "mpp28", "mpp29", "mpp30", "mpp31";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_init: pmx-init {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_usb_oc: pmx-usb-oc {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_leds: pmx-leds {
-				marvell,pins = "mpp41", "mpp42", "mpp43";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds>;
-		pinctrl-names = "default";
-
-		led-red {
-			label = "obsa6:red:stat";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		led-green {
-			label = "obsa6:green:stat";
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-
-		led-yellow {
-			label = "obsa6:yellow:stat";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-        };
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_gpio_init>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		power {
-			label = "Init Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	chip-delay = <25>;
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0 0x90000>;
-	};
-
-	partition@90000 {
-		label = "env";
-		reg = <0x90000 0x44000>;
-	};
-
-	partition@d4000 {
-		label = "test";
-		reg = <0xd4000 0x20000>;
-	};
-
-	partition@f4000 {
-		label = "conf";
-		reg = <0xf4000 0x400000>;
-	};
-
-	partition@4f4000 {
-		label = "linux";
-		reg = <0x4f4000 0x1d20000>;
-	};
-
-	partition@2214000 {
-		label = "user";
-		reg = <0x2214000 0x1dec000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&gpio0 {
-	status = "okay";
-
-	pinctrl-0 = <&pmx_gpio_header>;
-	pinctrl-names = "default";
-};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
deleted file mode 100644
index 946f0f453dd1a..0000000000000
--- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
+++ /dev/null
@@ -1,209 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for OpenBlocks A7 board
- *
- * Copyright (C) 2013 Free Electrons
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Plat'Home OpenBlocksA7";
-	compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		serial@12100 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			nr-ports = <1>;
-			status = "okay";
-		};
-
-		i2c@11100 {
-			status = "okay";
-
-			s24c02: s24c02@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-			};
-		};
-
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header
-				     &pmx_gpio_header_gpo>;
-			pinctrl-names = "default";
-
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11", "mpp15",
-					"mpp16";
-				marvell,function = "uart0";
-			};
-
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14", "mpp8",
-					"mpp9";
-				marvell,function = "uart1";
-			};
-
-			pmx_sysrst: pmx-sysrst {
-				marvell,pins = "mpp6";
-				marvell,function = "sysrst";
-			};
-
-			pmx_dip_switches: pmx-dip-switches {
-				marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47";
-				marvell,function = "gpio";
-			};
-
-			/*
-			 * Accessible on connector J202. The MPP
-			 * listed below are pin 1-7, pin 8 is unused,
-			 * pin 9 is external reset input and pin 10 is
-			 * ground.
-			 */
-			pmx_gpio_header: pmx-gpio-header {
-				marvell,pins = "mpp17", "mpp29", "mpp28",
-					       "mpp35", "mpp34", "mpp40";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_header_gpo: pxm-gpio-header-gpo {
-				marvell,pins = "mpp7";
-				marvell,function = "gpo";
-			};
-
-			pmx_gpio_init: pmx-init {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_usb_oc: pmx-usb-oc {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_leds: pmx-leds {
-				marvell,pins = "mpp41", "mpp42", "mpp43";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds>;
-		pinctrl-names = "default";
-
-		led-red {
-			label = "obsa7:red:stat";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		led-green {
-			label = "obsa7:green:stat";
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-
-		led-yellow {
-			label = "obsa7:yellow:stat";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-        };
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_gpio_init>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button {
-			label = "Init Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	chip-delay = <25>;
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0 0x1c0000>;
-	};
-
-	partition@1c0000 {
-		label = "env";
-		reg = <0x1c0000 0x2c0000>;
-	};
-
-	partition@480000 {
-		label = "test";
-		reg = <0x480000 0x160000>;
-	};
-
-	partition@5e0000 {
-		label = "conf";
-		reg = <0x5e0000 0x540000>;
-	};
-
-	partition@b20000 {
-		label = "linux";
-		reg = <0xb20000 0x3d40000>;
-	};
-
-	partition@4860000 {
-		label = "user";
-		reg = <0x4860000 0xb7a0000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-openrd-base.dts b/arch/arm/boot/dts/kirkwood-openrd-base.dts
deleted file mode 100644
index 094191ece3d7e..0000000000000
--- a/arch/arm/boot/dts/kirkwood-openrd-base.dts
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell OpenRD Base Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are specific to OpenRD
- * base variant of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood-openrd.dtsi"
-
-/ {
-	model = "OpenRD Base";
-	compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		serial@12100 {
-			status = "okay";
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts
deleted file mode 100644
index d4e0b8150a84c..0000000000000
--- a/arch/arm/boot/dts/kirkwood-openrd-client.dts
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell OpenRD Client Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are specific to OpenRD
- * client variant of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood-openrd.dtsi"
-
-/ {
-	model = "OpenRD Client";
-	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		audio-controller@a0000 {
-			status = "okay";
-		};
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			cs42l51: cs42l51@4a {
-				compatible = "cirrus,cs42l51";
-				reg = <0x4a>;
-				#sound-dai-cells = <0>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,mclk-fs = <256>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&audio0 0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&cs42l51>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-	ethphy1: ethernet-phy@24 {
-		reg = <24>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts b/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts
deleted file mode 100644
index 888e13320c190..0000000000000
--- a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell OpenRD Ultimate Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are specific to OpenRD
- * ultimate variant of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood-openrd.dtsi"
-
-/ {
-	model = "OpenRD Ultimate";
-	compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			cs42l51: cs42l51@4a {
-				compatible = "cirrus,cs42l51";
-				reg = <0x4a>;
-			};
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi
deleted file mode 100644
index 47f03c69c55a5..0000000000000
--- a/arch/arm/boot/dts/kirkwood-openrd.dtsi
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell OpenRD (Base|Client|Ultimate) Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are common between the three
- * variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
-			pinctrl-names = "default";
-
-			pmx_select28: pmx-select-rs232-rs485 {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_select34: pmx-select-uart-sd {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "okay";
-
-		};
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-		mvsdio@90000 {
-			status = "okay";
-			cd-gpios = <&gpio0 29 9>;
-		};
-		gpio@10100 {
-			p28 {
-				gpio-hog;
-				gpios = <28 GPIO_ACTIVE_HIGH>;
-				/*
-				 * SelRS232or485 selects between RS-232 or RS-485
-				 * mode for the second UART.
-				 *
-				 * Low: RS-232
-				 * High: RS-485
-				 *
-				 * To use the second UART, you need to change also
-				 * the SelUARTorSD.
-				 */
-				output-low;
-				line-name = "SelRS232or485";
-			};
-		};
-		gpio@10140 {
-			p2 {
-				gpio-hog;
-				gpios = <2 GPIO_ACTIVE_HIGH>;
-				/*
-				 * SelUARTorSD selects between the second UART
-				 * (serial@12100) and SD (mvsdio@90000).
-				 *
-				 * Low: UART
-				 * High: SD
-				 *
-				 * When changing this line make sure the newly
-				 * selected device node is enabled and the
-				 * previously selected device node is disabled.
-				 */
-				output-high; /* Select SD by default */
-				line-name = "SelUARTorSD";
-			};
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@600000 {
-		label = "root";
-		reg = <0x0600000 0x1FA00000>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-pogo_e02.dts b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
deleted file mode 100644
index f9e95e55f36dd..0000000000000
--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02
- *
- * Copyright (C) 2015 Christoph Junghans <ottxor@gentoo.org>
- *
- * based on information of dts files from
- *  Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com>
- *  OpenWrt by Felix Kaechele <heffer@fedoraproject.org>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Cloud Engines Pogoplug E02";
-	compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		health {
-			label = "pogo_e02:green:health";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		fault {
-			label = "pogo_e02:orange:fault";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
-		      &pmx_led_green >;
-	pinctrl-names = "default";
-
-	pmx_usb_power_enable: pmx-usb-power-enable {
-		marvell,pins = "mpp29";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_green: pmx-led-green {
-		marvell,pins = "mpp48";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_orange: pmx-led-orange {
-		marvell,pins = "mpp49";
-		marvell,function = "gpio";
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&nand {
-	chip-delay = <40>;
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "pogoplug";
-		reg = <0x0500000 0x2000000>;
-	};
-
-	partition@2500000 {
-		label = "root";
-		reg = <0x02500000 0x5b00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
deleted file mode 100644
index 5aa4669ae2548..0000000000000
--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4
- * inspired by the board files made by Kevin Mihelich for ArchLinux,
- * and their DTS file.
- *
- * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-#include <dt-bindings/input/linux-event-codes.h>
-
-/ {
-	model = "Cloud Engines PogoPlug Series 4";
-	compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	chosen {
-		stdout-path = "uart0:115200n8";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_eject>;
-		pinctrl-names = "default";
-
-		eject {
-			debounce-interval = <50>;
-			wakeup-source;
-			linux,code = <KEY_EJECTCD>;
-			label = "Eject Button";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
-		pinctrl-names = "default";
-
-		health {
-			label = "pogoplugv4:green:health";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		fault {
-			label = "pogoplugv4:red:fault";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pinctrl {
-	pmx_sata0: pmx-sata0 {
-		marvell,pins = "mpp21";
-		marvell,function = "sata0";
-	};
-
-	pmx_sata1: pmx-sata1 {
-		marvell,pins = "mpp20";
-		marvell,function = "sata1";
-	};
-
-	pmx_sdio_cd: pmx-sdio-cd {
-		marvell,pins = "mpp27";
-		marvell,function = "gpio";
-	};
-
-	pmx_sdio_wp: pmx-sdio-wp {
-		marvell,pins = "mpp28";
-		marvell,function = "gpio";
-	};
-
-	pmx_button_eject: pmx-button-eject {
-		marvell,pins = "mpp29";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_green: pmx-led-green {
-		marvell,pins = "mpp22";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_red: pmx-led-red {
-		marvell,pins = "mpp24";
-		marvell,function = "gpio";
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-/*
- * This PCIE controller has a USB 3.0 XHCI controller at 1,0
- */
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-	pinctrl-names = "default";
-	nr-ports = <1>;
-};
-
-&sdio {
-	status = "okay";
-	pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
-	pinctrl-names = "default";
-	cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-};
-
-&nand {
-	/* 128 MiB of NAND flash */
-	chip-delay = <40>;
-	status = "okay";
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x00000000 0x200000>;
-			read-only;
-		};
-
-		partition@200000 {
-			label = "uImage";
-			reg = <0x00200000 0x300000>;
-		};
-
-		partition@500000 {
-			label = "uImage2";
-			reg = <0x00500000 0x300000>;
-		};
-
-		partition@800000 {
-			label = "failsafe";
-			reg = <0x00800000 0x800000>;
-		};
-
-		partition@1000000 {
-			label = "root";
-			reg = <0x01000000 0x7000000>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
deleted file mode 100644
index f00325ffde078..0000000000000
--- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell RD88F6192 Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are common between the three
- * variants of the Marvell Kirkwood Development Board.
- */
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-
-/ {
-	model = "Marvell RD88F6192 reference design";
-	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_usb_power>;
-			pinctrl-names = "default";
-
-			pmx_usb_power: pmx-usb-power {
-				marvell,pins = "mpp10";
-				marvell,function = "gpo";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p128@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p128", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-			};
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "USB VBUS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
deleted file mode 100644
index 5da163591bbf4..0000000000000
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell RD88F6181 A Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions for the board with the A0 or
- * higher stepping of the SoC. The ethernet switch does not have a
- * "wan" port.
- */
-
-/dts-v1/;
-#include "kirkwood-rd88f6281.dtsi"
-
-/ {
-	model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
-	compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy1: ethernet-phy@11 {
-		 reg = <11>;
-	};
-};
-
-&switch {
-	reg = <10>;
-};
-
-&eth1 {
-	status = "okay";
-
-	ethernet1-port@0 {
-		 phy-handle = <&ethphy1>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
deleted file mode 100644
index 72edd47e19ffc..0000000000000
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell RD88F6181 Z0 stepping descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions for the board using the Z0
- * stepping of the SoC. The ethernet switch has a "wan" port.
-*/
-
-/dts-v1/;
-
-#include "kirkwood-rd88f6281.dtsi"
-
-/ {
-	model = "Marvell RD88f6281 Reference design, with Z0 SoC";
-	compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-};
-
-&eth1 {
-	status = "disabled";
-};
-
-&switch {
-	reg = <0>;
-
-	ports {
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
deleted file mode 100644
index 9d62f910cddf5..0000000000000
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell RD88F6181 Common Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are common between the two
- * variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-names = "default";
-
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
-			pinctrl-names = "default";
-			status = "okay";
-			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-			/* No WP GPIO */
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x200000>;
-	};
-
-	partition@300000 {
-		label = "rootfs";
-		reg = <0x0300000 0x500000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	switch: switch@0 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-			};
-
-			port@5 {
-				reg = <5>;
-				phy-mode = "rgmii-id";
-				ethernet = <&eth0port>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		speed = <1000>;
-		duplex = <1>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
deleted file mode 100644
index 4ad412115a241..0000000000000
--- a/arch/arm/boot/dts/kirkwood-rs212.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology RS212";
-	compatible = "synology,rs212", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-3 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-38 {
-		status = "okay";
-	};
-
-	regulators-hdd-30-2 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts
deleted file mode 100644
index 43673b03cb356..0000000000000
--- a/arch/arm/boot/dts/kirkwood-rs409.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology RS409";
-	compatible = "synology,rs409", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-15-18 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts
deleted file mode 100644
index 41fa63cec8398..0000000000000
--- a/arch/arm/boot/dts/kirkwood-rs411.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology RS411 RS812";
-	compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-3 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
deleted file mode 100644
index 0a698d3b73937..0000000000000
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
- *
- * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_led_red: pmx-led-red {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_blue: pmx-led-blue {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_sdio_wp: pmx-sdio-wp {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "root";
-		reg = <0x0500000 0x1fb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
deleted file mode 100644
index ae8f493c9a0f3..0000000000000
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug
- *
- * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- */
-
-/dts-v1/;
-
-#include "kirkwood-sheevaplug-common.dtsi"
-
-/ {
-	model = "Globalscale Technologies eSATA SheevaPlug";
-	compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
-			pinctrl-names = "default";
-			status = "okay";
-			cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-			wp-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_blue>;
-		pinctrl-names = "default";
-
-		health {
-			label = "sheevaplug:blue:health";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
deleted file mode 100644
index c73cc904e5c4b..0000000000000
--- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug
- *
- * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- */
-
-/dts-v1/;
-
-#include "kirkwood-sheevaplug-common.dtsi"
-
-/ {
-	model = "Globalscale Technologies SheevaPlug";
-	compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-			broken-cd;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
-		pinctrl-names = "default";
-
-		health {
-			label = "sheevaplug:blue:health";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		misc {
-			label = "sheevaplug:red:misc";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
deleted file mode 100644
index 9b6666020cddf..0000000000000
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ /dev/null
@@ -1,855 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Nodes for Marvell 628x Synology devices
- *
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/ {
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_alarmled_12: pmx-alarmled-12 {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_15: pmx-fanctrl-15 {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_16: pmx-fanctrl-16 {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_17: pmx-fanctrl-17 {
-				marvell,pins = "mpp17";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanalarm_18: pmx-fanalarm-18 {
-				marvell,pins = "mpp18";
-				marvell,function = "gpo";
-			};
-
-			pmx_hddled_20: pmx-hddled-20 {
-				marvell,pins = "mpp20";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_21: pmx-hddled-21 {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_22: pmx-hddled-22 {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_23: pmx-hddled-23 {
-				marvell,pins = "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_24: pmx-hddled-24 {
-				marvell,pins = "mpp24";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_25: pmx-hddled-25 {
-				marvell,pins = "mpp25";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_26: pmx-hddled-26 {
-				marvell,pins = "mpp26";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_27: pmx-hddled-27 {
-				marvell,pins = "mpp27";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_28: pmx-hddled-28 {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
-				marvell,pins = "mpp30";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
-				marvell,pins = "mpp31";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_32: pmx-fanctrl-32 {
-				marvell,pins = "mpp32";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_33: pmx-fanctrl-33 {
-				marvell,pins = "mpp33";
-				marvell,function = "gpo";
-			};
-
-			pmx_fanctrl_34: pmx-fanctrl-34 {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanalarm_35: pmx-fanalarm-35 {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_36: pmx-hddled-36 {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_37: pmx-hddled-37 {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_38: pmx-hddled-38 {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_39: pmx-hddled-39 {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_40: pmx-hddled-40 {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_41: pmx-hddled-41 {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_42: pmx-hddled-42 {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_43: pmx-hddled-43 {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_44: pmx-hddled-44 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_45: pmx-hddled-45 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanalarm_44: pmx-fanalarm-44 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanalarm_45: pmx-fanalarm-45 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-		};
-
-		rtc@10300 {
-			status = "disabled";
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p80", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x00000000 0x00080000>;
-					label = "RedBoot";
-				};
-
-				partition@80000 {
-					reg = <0x00080000 0x00200000>;
-					label = "zImage";
-				};
-
-				partition@280000 {
-					reg = <0x00280000 0x00140000>;
-					label = "rd.gz";
-				};
-
-				partition@3c0000 {
-					reg = <0x003c0000 0x00010000>;
-					label = "vendor";
-				};
-
-				partition@3d0000 {
-					reg = <0x003d0000 0x00020000>;
-					label = "RedBoot config";
-				};
-
-				partition@3f0000 {
-					reg = <0x003f0000 0x00010000>;
-					label = "FIS directory";
-				};
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			rs5c372: rs5c372@32 {
-				status = "disabled";
-				compatible = "ricoh,rs5c372a";
-				reg = <0x32>;
-			};
-
-			s35390a: s35390a@30 {
-				status = "disabled";
-				compatible = "sii,s35390a";
-				reg = <0x30>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		serial@12100 {
-			status = "okay";
-		};
-
-		poweroff@12100 {
-			compatible = "synology,power-off";
-			reg = <0x12100 0x100>;
-			clocks = <&gate_clk 7>;
-		};
-
-		sata@80000 {
-			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio-fan-150-32-35 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
-		             &pmx_fanalarm_35>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
-			 &gpio1 1 GPIO_ACTIVE_HIGH
-			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
-	};
-
-	gpio-fan-150-15-18 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
-		             &pmx_fanalarm_18>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
-			 &gpio0 16 GPIO_ACTIVE_HIGH
-			 &gpio0 17 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
-	};
-
-	gpio-fan-100-32-35 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
-		             &pmx_fanalarm_35>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
-			 &gpio1 1 GPIO_ACTIVE_HIGH
-			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
-	};
-
-	gpio-fan-100-15-18 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
-		             &pmx_fanalarm_18>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
-			 &gpio0 16 GPIO_ACTIVE_HIGH
-			 &gpio0 17 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
-		             &pmx_fanalarm_35>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
-			 &gpio0 16 GPIO_ACTIVE_HIGH
-			 &gpio0 17 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
-	};
-
-	gpio-fan-100-15-35-3 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
-		             &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
-			 &gpio0 16 GPIO_ACTIVE_HIGH
-			 &gpio0 17 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
-			       &gpio1 12 GPIO_ACTIVE_HIGH
-			       &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
-	};
-
-	gpio-leds-alarm-12 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_alarmled_12>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:alarm";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-20 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
-			     &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
-			     &pmx_hddled_26 &pmx_hddled_27>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-green {
-			label = "synology:green:hdd2";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-amber {
-			label = "synology:amber:hdd2";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd3-green {
-			label = "synology:green:hdd3";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd3-amber {
-			label = "synology:amber:hdd3";
-			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd4-green {
-			label = "synology:green:hdd4";
-			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd4-amber {
-			label = "synology:amber:hdd4";
-			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-21-1 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-green {
-			label = "synology:green:hdd2";
-			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-amber {
-			label = "synology:amber:hdd2";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-36 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
-			     &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
-			     &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
-			     &pmx_hddled_45>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-green {
-			label = "synology:green:hdd2";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-amber {
-			label = "synology:amber:hdd2";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd3-green {
-			label = "synology:green:hdd3";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd3-amber {
-			label = "synology:amber:hdd3";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd4-green {
-			label = "synology:green:hdd4";
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd4-amber {
-			label = "synology:amber:hdd4";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd5-green {
-			label = "synology:green:hdd5";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd5-amber {
-			label = "synology:amber:hdd5";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-38 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-green {
-			label = "synology:green:hdd2";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-amber {
-			label = "synology:amber:hdd2";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	regulators-hdd-29 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd1power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-30-1 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd1_pwr_30>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd1power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-30-2 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd1power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-30-4 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
-			     &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd1power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "hdd3power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "hdd4power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-31 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd2_pwr_31>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-34 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
-			     &pmx_hdd4_pwr_45>;
-		pinctrl-names = "default";
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "hdd3power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "hdd4power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
-		reg = <8>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		device_type = "ethernet-phy";
-		reg = <9>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "disabled";
-
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
deleted file mode 100644
index ad093324e075a..0000000000000
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ /dev/null
@@ -1,227 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for HP t5325 Thin Client"
- *
- * Copyright (C) 2014
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Andrew Lunn <andrew@lunn.ch>
- *
-*/
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "HP t5325 Thin Client";
-	compatible = "hp,t5325", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
-			pinctrl-names = "default";
-
-			pmx_button_power: pmx-button_power {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_power_off: pmx-power-off {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-
-			pmx_led: pmx-led {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_usb_sata_power_enable: pmx-usb-sata-power-enable {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_spi: pmx-spi {
-				marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7";
-				marvell,function = "spi";
-			};
-
-			pmx_sysrst: pmx-sysrst {
-				marvell,pins = "mpp6";
-				marvell,function = "sysrst";
-			};
-
-			pmx_i2s: pmx-i2s {
-				marvell,pins = "mpp39", "mpp40", "mpp41", "mpp42",
-					       "mpp43";
-				marvell,function = "audio";
-			};
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p80", "jedec,spi-nor";
-				spi-max-frequency = <86000000>;
-				reg = <0>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-
-				partition@1 {
-					reg = <0x80000 0x40000>;
-					label = "SSD firmware";
-				};
-
-				partition@2 {
-					reg = <0xc0000 0x10000>;
-					label = "u-boot env";
-				};
-
-				partition@3 {
-					reg = <0xd0000 0x10000>;
-					label = "permanent u-boot env";
-				};
-
-				partition@4 {
-					reg = <0xd0000 0x10000>;
-					label = "permanent u-boot env";
-				};
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			alc5621: alc5621@1a {
-				compatible = "realtek,alc5621";
-				reg = <0x1a>;
-				#sound-dai-cells = <0>;
-				add-ctrl = <0x3700>;
-				jack-det-ctrl = <0x4810>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-		audio: audio-controller@a0000 {
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_sata_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB-SATA Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_power>;
-		pinctrl-names = "default";
-
-		power {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_power_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPL",
-			"Headphone Jack", "HPR",
-			"Speaker", "SPKOUT",
-			"Speaker", "SPKOUTN",
-			"MIC1", "Mic Jack",
-			"MIC2", "Mic Jack";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker",
-			"Microphone", "Mic Jack";
-
-		simple-audio-card,mclk-fs = <256>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&audio>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&alc5621>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		device_type = "ethernet-phy";
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
deleted file mode 100644
index a5b51e29f63ee..0000000000000
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ /dev/null
@@ -1,216 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Universal Scientific Industrial Co. Topkick-1281P2";
-	compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			/*
-			 * Switch positions
-			 *
-			 *     /-SW_LEFT(2)
-			 *     |
-			 *     |   /-SW_IDLE
-			 *     |   |
-			 *     |   |   /-SW_RIGHT
-			 *     |   |   |
-			 * PS [L] [I] [R] LEDS
-			 */
-			pinctrl-0 = <&pmx_sw_left &pmx_sw_right
-				     &pmx_sw_idle &pmx_sw_left2>;
-			pinctrl-names = "default";
-
-			pmx_led_disk_yellow: pmx-led-disk-yellow {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_sata0_pwr_enable: pmx-sata0-pwr-enable {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_red: pmx-led-sys-red {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_blue: pmx-led-sys-blue {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_wifi_green: pmx-led-wifi-green {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_sw_left: pmx-sw-left {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-
-			pmx_sw_right: pmx-sw-right {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_sw_idle: pmx-sw-idle {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_sw_left2: pmx-sw-left2 {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_wifi_yellow: pmx-led-wifi-yellow {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		i2c@11000 {
-			status = "okay";
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-			broken-cd;
-		};
-	};
-
-	gpio-leds {
-		/*
-		 * GPIO LED layout
-		 *
-		 *       /-SYS_LED(2)
-		 *       |
-		 *       |   /-DISK_LED
-		 *       |   |
-		 *       |   |   /-WLAN_LED(2)
-		 *       |   |   |
-		 * [SW] [*] [*] [*]
-		 */
-
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_disk_yellow &pmx_led_sys_red
-			     &pmx_led_sys_blue &pmx_led_wifi_green
-			     &pmx_led_wifi_yellow>;
-		pinctrl-names = "default";
-
-		disk {
-			label = "topkick:yellow:disk";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "disk-activity";
-		};
-		system2 {
-			label = "topkick:red:system";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-		system {
-			label = "topkick:blue:system";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		wifi {
-			label = "topkick:green:wifi";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-		wifi2 {
-			label = "topkick:yellow:wifi";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_sata0_pwr_enable>;
-		pinctrl-names = "default";
-
-		sata0_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 4 0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x180000>;
-	};
-
-	partition@180000 {
-		label = "u-boot env";
-		reg = <0x0180000 0x20000>;
-	};
-
-	partition@200000 {
-		label = "uImage";
-		reg = <0x0200000 0x600000>;
-	};
-
-	partition@800000 {
-		label = "uInitrd";
-		reg = <0x0800000 0x1000000>;
-	};
-
-	partition@1800000 {
-		label = "rootfs";
-		reg = <0x1800000 0xe800000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
deleted file mode 100644
index 30892c19aceb8..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-ts219.dtsi"
-
-/ {
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
-			pinctrl-names = "default";
-
-			pmx_ram_size: pmx-ram-size {
-				/* RAM: 0: 256 MB, 1: 512 MB */
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_USB_copy_button: pmx-USB-copy-button {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-			pmx_reset_button: pmx-reset-button {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-			pmx_board_id: pmx-board-id {
-				/* 0: TS-11x, 1: TS-21x */
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
-		pinctrl-names = "default";
-
-		copy {
-			label = "USB Copy";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-		reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
deleted file mode 100644
index aba1205981f1e..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-ts219.dtsi"
-
-/ {
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
-			pinctrl-names = "default";
-
-			pmx_ram_size: pmx-ram-size {
-				/* RAM: 0: 256 MB, 1: 512 MB */
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_reset_button: pmx-reset-button {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_USB_copy_button: pmx-USB-copy-button {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_board_id: pmx-board-id {
-				/* 0: TS-11x, 1: TS-21x */
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
-		pinctrl-names = "default";
-
-		copy {
-			label = "USB Copy";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-		reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&ethphy0 { reg = <0>; };
-
-&pcie1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
deleted file mode 100644
index 1939462a5f487..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/ {
-	model = "QNAP TS219 family";
-	compatible = "qnap,ts219", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			s35390a: s35390a@30 {
-				compatible = "s35390a";
-				reg = <0x30>;
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-		serial@12100 {
-			status = "okay";
-		};
-		poweroff@12100 {
-			compatible = "qnap,power-off";
-			reg = <0x12100 0x100>;
-			clocks = <&gate_clk 7>;
-		};
-		spi@10600 {
-			status = "okay";
-
-			m25p128@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p128", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x00000000 0x00080000>;
-					label = "U-Boot";
-				};
-
-				partition@200000 {
-					reg = <0x00200000 0x00200000>;
-					label = "Kernel";
-				};
-
-				partition@400000 {
-					reg = <0x00400000 0x00900000>;
-					label = "RootFS1";
-				};
-				partition@d00000 {
-					reg = <0x00d00000 0x00300000>;
-					label = "RootFS2";
-				};
-				partition@40000 {
-					reg = <0x00080000 0x00040000>;
-					label = "U-Boot Config";
-				};
-				partition@c0000 {
-					reg = <0x000c0000 0x00140000>;
-					label = "NAS Config";
-				};
-			};
-		};
-		sata@80000 {
-			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@X {
-		/* overwrite reg property in board file */
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&rtc {
-	/*
-	 * There is a s35390a available on the i2c bus, the internal rtc isn't
-	 * working (probably no crystal assembled).
-	 */
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6281.dts b/arch/arm/boot/dts/kirkwood-ts419-6281.dts
deleted file mode 100644
index 4a42ebcca4f05..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ts419-6281.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for QNAP TS41X with 6281 SoC
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-ts219.dtsi"
-#include "kirkwood-ts419.dtsi"
-
-&ethphy0 { reg = <8>; };
-&ethphy1 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/kirkwood-ts419-6282.dts
deleted file mode 100644
index be772e194c2b0..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ts419-6282.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for QNAP TS41X with 6282 SoC
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-ts219.dtsi"
-#include "kirkwood-ts419.dtsi"
-
-&ethphy0 { reg = <0>; };
-&ethphy1 { reg = <1>; };
-
-&pciec { status = "okay"; };
-&pcie1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/kirkwood-ts419.dtsi
deleted file mode 100644
index 717236853e458..0000000000000
--- a/arch/arm/boot/dts/kirkwood-ts419.dtsi
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree include file for QNAP TS41X
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- */
-
-/ {
-	model = "QNAP TS419 family";
-	compatible = "qnap,ts419", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-names = "default";
-
-			pmx_USB_copy_button: pmx-USB-copy-button {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_reset_button: pmx-reset-button {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			/*
-			 * JP1 indicates if an LCD module is installed
-			 * on the serial port (0), or if the port is used
-			 * as a console (1).
-			 */
-			pmx_jumper_jp1: pmx-jumper_jp1 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
-		pinctrl-names = "default";
-
-		copy {
-			label = "USB Copy";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-		reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy1: ethernet-phy@1 {
-		device_type = "ethernet-phy";
-                /* overwrite reg property in board file */
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
deleted file mode 100644
index 815ef7719d13c..0000000000000
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ /dev/null
@@ -1,394 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "marvell,kirkwood";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,feroceon";
-			reg = <0>;
-			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
-			clock-names = "cpu_clk", "ddrclk", "powersave";
-		};
-	};
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		i2c0 = &i2c0;
-	};
-
-	mbus@f1000000 {
-		compatible = "marvell,kirkwood-mbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		/* If a board file needs to change this ranges it must replace it completely */
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000	/* internal-regs */
-			  MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000	/* nand flash */
-			  MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000	/* crypto sram */
-			  >;
-		controller = <&mbusc>;
-		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
-		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
-
-		nand: nand@12f {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cle = <0>;
-			ale = <1>;
-			bank-width = <1>;
-			compatible = "marvell,orion-nand";
-			reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
-			chip-delay = <25>;
-			/* set partition map and/or chip-delay in board dts */
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		crypto_sram: sa-sram@301 {
-			compatible = "mmio-sram";
-			reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
-			clocks = <&gate_clk 17>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-	};
-
-	ocp@f1000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf1000000 0x0100000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		pinctrl: pin-controller@10000 {
-			/* set compatible property in SoC file */
-			reg = <0x10000 0x20>;
-
-			pmx_ge1: pmx-ge1 {
-				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
-					       "mpp24", "mpp25", "mpp26", "mpp27",
-					       "mpp30", "mpp31", "mpp32", "mpp33";
-				marvell,function = "ge1";
-			};
-
-			pmx_nand: pmx-nand {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-					       "mpp4", "mpp5", "mpp18", "mpp19";
-				marvell,function = "nand";
-			};
-
-			/*
-			 * Default SPI0 pinctrl setting with CSn on mpp0,
-			 * overwrite marvell,pins on board level if required.
-			 */
-			pmx_spi: pmx-spi {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
-				marvell,function = "spi";
-			};
-
-			pmx_twsi0: pmx-twsi0 {
-				marvell,pins = "mpp8", "mpp9";
-				marvell,function = "twsi0";
-			};
-
-			/*
-			 * Default UART pinctrl setting without RTS/CTS,
-			 * overwrite marvell,pins on board level if required.
-			 */
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11";
-				marvell,function = "uart0";
-			};
-
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14";
-				marvell,function = "uart1";
-			};
-		};
-
-		core_clk: core-clocks@10030 {
-			compatible = "marvell,kirkwood-core-clock";
-			reg = <0x10030 0x4>;
-			#clock-cells = <1>;
-		};
-
-		spi0: spi@10600 {
-			compatible = "marvell,orion-spi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			interrupts = <23>;
-			reg = <0x10600 0x28>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_spi>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		gpio0: gpio@10100 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0x10100 0x40>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <35>, <36>, <37>, <38>;
-			clocks = <&gate_clk 7>;
-		};
-
-		gpio1: gpio@10140 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0x10140 0x40>;
-			ngpios = <18>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <39>, <40>, <41>;
-			clocks = <&gate_clk 7>;
-		};
-
-		i2c0: i2c@11000 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11000 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <29>;
-			clock-frequency = <100000>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_twsi0>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		uart0: serial@12000 {
-			compatible = "ns16550a";
-			reg = <0x12000 0x100>;
-			reg-shift = <2>;
-			interrupts = <33>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		uart1: serial@12100 {
-			compatible = "ns16550a";
-			reg = <0x12100 0x100>;
-			reg-shift = <2>;
-			interrupts = <34>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_uart1>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		mbusc: mbus-controller@20000 {
-			compatible = "marvell,mbus-controller";
-			reg = <0x20000 0x80>, <0x1500 0x20>;
-		};
-
-		sysc: system-controller@20000 {
-			compatible = "marvell,orion-system-controller";
-			reg = <0x20000 0x120>;
-		};
-
-		bridge_intc: bridge-interrupt-ctrl@20110 {
-			compatible = "marvell,orion-bridge-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x20110 0x8>;
-			interrupts = <1>;
-			marvell,#interrupts = <6>;
-		};
-
-		gate_clk: clock-gating-control@2011c {
-			compatible = "marvell,kirkwood-gating-clock";
-			reg = <0x2011c 0x4>;
-			clocks = <&core_clk 0>;
-			#clock-cells = <1>;
-		};
-
-		l2: l2-cache@20128 {
-			compatible = "marvell,kirkwood-cache";
-			reg = <0x20128 0x4>;
-		};
-
-		intc: interrupt-controller@20200 {
-			compatible = "marvell,orion-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x20200 0x10>, <0x20210 0x10>;
-		};
-
-		timer: timer@20300 {
-			compatible = "marvell,orion-timer";
-			reg = <0x20300 0x20>;
-			interrupt-parent = <&bridge_intc>;
-			interrupts = <1>, <2>;
-			clocks = <&core_clk 0>;
-		};
-
-		wdt: watchdog-timer@20300 {
-			compatible = "marvell,orion-wdt";
-			reg = <0x20300 0x28>, <0x20108 0x4>;
-			interrupt-parent = <&bridge_intc>;
-			interrupts = <3>;
-			clocks = <&gate_clk 7>;
-			status = "okay";
-		};
-
-		cesa: crypto@30000 {
-			compatible = "marvell,kirkwood-crypto";
-			reg = <0x30000 0x10000>;
-			reg-names = "regs";
-			interrupts = <22>;
-			clocks = <&gate_clk 17>;
-			marvell,crypto-srams = <&crypto_sram>;
-			marvell,crypto-sram-size = <0x800>;
-			status = "okay";
-		};
-
-		usb0: ehci@50000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0x50000 0x1000>;
-			interrupts = <19>;
-			clocks = <&gate_clk 3>;
-			status = "okay";
-		};
-
-		dma0: xor@60800 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60800 0x100
-			       0x60A00 0x100>;
-			status = "okay";
-			clocks = <&gate_clk 8>;
-
-			xor00 {
-				interrupts = <5>;
-				dmacap,memcpy;
-				dmacap,xor;
-			};
-			xor01 {
-				interrupts = <6>;
-				dmacap,memcpy;
-				dmacap,xor;
-				dmacap,memset;
-			};
-		};
-
-		dma1: xor@60900 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60900 0x100
-			       0x60B00 0x100>;
-			status = "okay";
-			clocks = <&gate_clk 16>;
-
-			xor00 {
-				interrupts = <7>;
-				dmacap,memcpy;
-				dmacap,xor;
-			};
-			xor01 {
-				interrupts = <8>;
-				dmacap,memcpy;
-				dmacap,xor;
-				dmacap,memset;
-			};
-		};
-
-		eth0: ethernet-controller@72000 {
-			compatible = "marvell,kirkwood-eth";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72000 0x4000>;
-			clocks = <&gate_clk 0>;
-			marvell,tx-checksum-limit = <1600>;
-			status = "disabled";
-
-			eth0port: ethernet0-port@0 {
-				compatible = "marvell,kirkwood-eth-port";
-				reg = <0>;
-				interrupts = <11>;
-				/* overwrite MAC address in bootloader */
-				local-mac-address = [00 00 00 00 00 00];
-				/* set phy-handle property in board file */
-			};
-		};
-
-		mdio: mdio-bus@72004 {
-			compatible = "marvell,orion-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72004 0x84>;
-			interrupts = <46>;
-			clocks = <&gate_clk 0>;
-			status = "disabled";
-
-			/* add phy nodes in board file */
-		};
-
-		eth1: ethernet-controller@76000 {
-			compatible = "marvell,kirkwood-eth";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x76000 0x4000>;
-			clocks = <&gate_clk 19>;
-			marvell,tx-checksum-limit = <1600>;
-			pinctrl-0 = <&pmx_ge1>;
-			pinctrl-names = "default";
-			status = "disabled";
-
-			eth1port: ethernet1-port@0 {
-				compatible = "marvell,kirkwood-eth-port";
-				reg = <0>;
-				interrupts = <15>;
-				/* overwrite MAC address in bootloader */
-				local-mac-address = [00 00 00 00 00 00];
-				/* set phy-handle property in board file */
-			};
-		};
-
-		sata_phy0: sata-phy@82000 {
-			compatible = "marvell,mvebu-sata-phy";
-			reg = <0x82000 0x0334>;
-			clocks = <&gate_clk 14>;
-			clock-names = "sata";
-			#phy-cells = <0>;
-			status = "okay";
-		};
-
-		sata_phy1: sata-phy@84000 {
-			compatible = "marvell,mvebu-sata-phy";
-			reg = <0x84000 0x0334>;
-			clocks = <&gate_clk 15>;
-			clock-names = "sata";
-			#phy-cells = <0>;
-			status = "okay";
-		};
-
-		audio0: audio-controller@a0000 {
-			compatible = "marvell,kirkwood-audio";
-			#sound-dai-cells = <0>;
-			reg = <0xa0000 0x2210>;
-			interrupts = <24>;
-			clocks = <&gate_clk 9>;
-			clock-names = "internal";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
deleted file mode 100644
index 0f555eb45bda3..0000000000000
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS
- */
-
-/dts-v1/;
-#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
-
-/ {
-	model = "Kontron KSwitch D10 MMT 6G-2GS";
-	compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921",
-		     "microchip,lan9668", "microchip,lan966";
-
-	aliases {
-		i2c0 = &i2c4;
-		i2c1 = &i2c1;
-	};
-
-	sfp0: sfp0 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c4>;
-		los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>;
-		maximum-power-milliwatt = <2500>;
-		tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>;
-		rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>;
-		rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	sfp1: sfp1 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>;
-		maximum-power-milliwatt = <2500>;
-		tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>;
-		rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>;
-		rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&flx1 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c1: i2c@600 {
-		pinctrl-0 = <&fc1_c_pins>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-};
-
-&flx4 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c4: i2c@600 {
-		pinctrl-0 = <&fc4_b_pins>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-};
-
-&gpio {
-	fc1_c_pins: fc1-c-i2c-pins {
-		/* SCL, SDA */
-		pins = "GPIO_47", "GPIO_48";
-		function = "fc1_c";
-	};
-
-	fc4_b_pins: fc4-b-i2c-pins {
-		/* SCL, SDA */
-		pins = "GPIO_57", "GPIO_58";
-		function = "fc4_b";
-	};
-};
-
-&port2 {
-	phys = <&serdes 2 SERDES6G(0)>;
-	sfp = <&sfp0>;
-	managed = "in-band-status";
-	phy-mode = "sgmii";
-	status = "okay";
-};
-
-&port3 {
-	phys = <&serdes 3 SERDES6G(1)>;
-	sfp = <&sfp1>;
-	managed = "in-band-status";
-	phy-mode = "sgmii";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
deleted file mode 100644
index 5feef9a59a790..0000000000000
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for the Kontron KSwitch D10 MMT 8G
- */
-
-/dts-v1/;
-#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
-
-/ {
-	model = "Kontron KSwitch D10 MMT 8G";
-	compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921",
-		     "microchip,lan9668", "microchip,lan966";
-};
-
-&mdio0 {
-	phy2: ethernet-phy@3 {
-		reg = <3>;
-	};
-
-	phy3: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&port2 {
-	phys = <&serdes 2 SERDES6G(0)>;
-	phy-handle = <&phy2>;
-	phy-mode = "sgmii";
-	managed = "in-band-status";
-	status = "okay";
-};
-
-&port3 {
-	phys = <&serdes 3 SERDES6G(1)>;
-	phy-handle = <&phy3>;
-	phy-mode = "sgmii";
-	managed = "in-band-status";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
deleted file mode 100644
index 0097e72e3fb22..0000000000000
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
+++ /dev/null
@@ -1,203 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Common part of the device tree for the Kontron KSwitch D10 MMT
- */
-
-/dts-v1/;
-#include "lan966x.dtsi"
-#include "dt-bindings/phy/phy-lan966x-serdes.h"
-
-/ {
-	aliases {
-		serial0 = &usart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
-		priority = <200>;
-	};
-};
-
-&flx0 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	usart0: serial@200 {
-		pinctrl-0 = <&usart0_pins>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-};
-
-&flx3 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
-	status = "okay";
-
-	spi3: spi@400 {
-		pinctrl-0 = <&fc3_b_pins>;
-		pinctrl-names = "default";
-		status = "okay";
-		cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&gpio {
-	fc3_b_pins: fc3-b-pins {
-		/* SCK, MISO, MOSI */
-		pins = "GPIO_51", "GPIO_52", "GPIO_53";
-		function = "fc3_b";
-	};
-
-	miim_c_pins: miim-c-pins {
-		/* MDC, MDIO */
-		pins = "GPIO_59", "GPIO_60";
-		function = "miim_c";
-	};
-
-	sgpio_a_pins: sgpio-a-pins {
-		/* SCK, D0, D1 */
-		pins = "GPIO_32", "GPIO_33", "GPIO_34";
-		function = "sgpio_a";
-	};
-
-	sgpio_b_pins: sgpio-b-pins {
-		/* LD */
-		pins = "GPIO_64";
-		function = "sgpio_b";
-	};
-
-	usart0_pins: usart0-pins {
-		/* RXD, TXD */
-		pins = "GPIO_25", "GPIO_26";
-		function = "fc0_b";
-	};
-
-	usbs_a_pins: usbs-a-pins {
-		/* VBUS_DET */
-		pins = "GPIO_66";
-		function = "gpio";
-	};
-};
-
-&mdio0 {
-	pinctrl-0 = <&miim_c_pins>;
-	pinctrl-names = "default";
-	reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-	clock-frequency = <2500000>;
-	status = "okay";
-
-	phy4: ethernet-phy@5 {
-		reg = <5>;
-		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
-	};
-
-	phy5: ethernet-phy@6 {
-		reg = <6>;
-		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
-	};
-
-	phy6: ethernet-phy@7 {
-		reg = <7>;
-		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
-	};
-
-	phy7: ethernet-phy@8 {
-		reg = <8>;
-		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
-	};
-};
-
-&mdio1 {
-	status = "okay";
-};
-
-&phy0 {
-	status = "okay";
-};
-
-&phy1 {
-	status = "okay";
-};
-
-&port0 {
-	phys = <&serdes 0 CU(0)>;
-	phy-handle = <&phy0>;
-	phy-mode = "gmii";
-	status = "okay";
-};
-
-&port1 {
-	phys = <&serdes 1 CU(1)>;
-	phy-handle = <&phy1>;
-	phy-mode = "gmii";
-	status = "okay";
-};
-
-&port4 {
-	phys = <&serdes 4 SERDES6G(2)>;
-	phy-handle = <&phy4>;
-	phy-mode = "qsgmii";
-	status = "okay";
-};
-
-&port5 {
-	phys = <&serdes 5 SERDES6G(2)>;
-	phy-handle = <&phy5>;
-	phy-mode = "qsgmii";
-	status = "okay";
-};
-
-&port6 {
-	phys = <&serdes 6 SERDES6G(2)>;
-	phy-handle = <&phy6>;
-	phy-mode = "qsgmii";
-	status = "okay";
-};
-
-&port7 {
-	phys = <&serdes 7 SERDES6G(2)>;
-	phy-handle = <&phy7>;
-	phy-mode = "qsgmii";
-	status = "okay";
-};
-
-&serdes {
-	status = "okay";
-};
-
-&sgpio {
-	pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>;
-	pinctrl-names = "default";
-	bus-frequency = <8000000>;
-	/* arbitrary range because all GPIOs are in software mode */
-	microchip,sgpio-port-ranges = <0 11>;
-	status = "okay";
-
-	sgpio_in: gpio@0 {
-		ngpios = <128>;
-	};
-
-	sgpio_out: gpio@1 {
-		ngpios = <128>;
-	};
-};
-
-&switch {
-	status = "okay";
-};
-
-&udc {
-	pinctrl-0 = <&usbs_a_pins>;
-	pinctrl-names = "default";
-	atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts
deleted file mode 100644
index 8804e8ba53705..0000000000000
--- a/arch/arm/boot/dts/lan966x-pcb8290.dts
+++ /dev/null
@@ -1,195 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board
- *
- * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
- *
- * Author: Horatiu Vultur <horatiu.vultur@microchip.com>
- */
-/dts-v1/;
-#include "lan966x.dtsi"
-#include "dt-bindings/phy/phy-lan966x-serdes.h"
-
-/ {
-	model = "Microchip EVB LAN9668";
-	compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966";
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
-		priority = <200>;
-	};
-};
-
-&aes {
-	status = "disabled"; /* Reserved by secure OS */
-};
-
-&gpio {
-	miim_a_pins: mdio-pins {
-		/* MDC, MDIO */
-		pins =  "GPIO_28", "GPIO_29";
-		function = "miim_a";
-	};
-
-	pps_out_pins: pps-out-pins {
-		/* 1pps output */
-		pins = "GPIO_38";
-		function = "ptpsync_3";
-	};
-
-	ptp_ext_pins: ptp-ext-pins {
-		/* 1pps input */
-		pins = "GPIO_35";
-		function = "ptpsync_0";
-	};
-
-	udc_pins: ucd-pins {
-		/* VBUS_DET B */
-		pins = "GPIO_8";
-		function = "usb_slave_b";
-	};
-};
-
-&mdio0 {
-	pinctrl-0 = <&miim_a_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	ext_phy0: ethernet-phy@7 {
-		reg = <7>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio>;
-		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
-	};
-
-	ext_phy1: ethernet-phy@8 {
-		reg = <8>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio>;
-		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
-	};
-
-	ext_phy2: ethernet-phy@9 {
-		reg = <9>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio>;
-		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
-	};
-
-	ext_phy3: ethernet-phy@10 {
-		reg = <10>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio>;
-		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
-	};
-
-	ext_phy4: ethernet-phy@15 {
-		reg = <15>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio>;
-		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
-	};
-
-	ext_phy5: ethernet-phy@16 {
-		reg = <16>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio>;
-		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
-	};
-
-	ext_phy6: ethernet-phy@17 {
-		reg = <17>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio>;
-		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
-	};
-
-	ext_phy7: ethernet-phy@18 {
-		reg = <18>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio>;
-		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
-	};
-};
-
-&port0 {
-	reg = <2>;
-	phy-handle = <&ext_phy2>;
-	phy-mode = "qsgmii";
-	phys = <&serdes 0 SERDES6G(1)>;
-	status = "okay";
-};
-
-&port1 {
-	reg = <3>;
-	phy-handle = <&ext_phy3>;
-	phy-mode = "qsgmii";
-	phys = <&serdes 1 SERDES6G(1)>;
-	status = "okay";
-};
-
-&port2 {
-	reg = <0>;
-	phy-handle = <&ext_phy0>;
-	phy-mode = "qsgmii";
-	phys = <&serdes 2 SERDES6G(1)>;
-	status = "okay";
-};
-
-&port3 {
-	reg = <1>;
-	phy-handle = <&ext_phy1>;
-	phy-mode = "qsgmii";
-	phys = <&serdes 3 SERDES6G(1)>;
-	status = "okay";
-};
-
-&port4 {
-	reg = <6>;
-	phy-handle = <&ext_phy6>;
-	phy-mode = "qsgmii";
-	phys = <&serdes 4 SERDES6G(2)>;
-	status = "okay";
-};
-
-&port5 {
-	reg = <7>;
-	phy-handle = <&ext_phy7>;
-	phy-mode = "qsgmii";
-	phys = <&serdes 5 SERDES6G(2)>;
-	status = "okay";
-};
-
-&port6 {
-	reg = <4>;
-	phy-handle = <&ext_phy4>;
-	phy-mode = "qsgmii";
-	phys = <&serdes 6 SERDES6G(2)>;
-	status = "okay";
-};
-
-&port7 {
-	reg = <5>;
-	phy-handle = <&ext_phy5>;
-	phy-mode = "qsgmii";
-	phys = <&serdes 7 SERDES6G(2)>;
-	status = "okay";
-};
-
-&serdes {
-	status = "okay";
-};
-
-&switch {
-	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&udc {
-	pinctrl-0 = <&udc_pins>;
-	pinctrl-names = "default";
-	atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
deleted file mode 100644
index 3a3d76af86122..0000000000000
--- a/arch/arm/boot/dts/lan966x-pcb8291.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * lan966x_pcb8291.dts - Device Tree file for PCB8291
- */
-/dts-v1/;
-#include "lan966x.dtsi"
-#include "dt-bindings/phy/phy-lan966x-serdes.h"
-
-/ {
-	model = "Microchip EVB - LAN9662";
-	compatible = "microchip,lan9662-pcb8291", "microchip,lan9662", "microchip,lan966";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &usart3;
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
-		priority = <200>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-s0-blue {
-			label = "s0:blue";
-			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-s0-green {
-			label = "s0:green";
-			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-s1-blue {
-			label = "s1:blue";
-			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-s1-green {
-			label = "s1:green";
-			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-};
-
-&aes {
-	status = "disabled"; /* Reserved by secure OS */
-};
-
-&gpio {
-	fc3_b_pins: fc3-b-pins {
-		/* RX, TX */
-		pins = "GPIO_52", "GPIO_53";
-		function = "fc3_b";
-	};
-
-	can0_b_pins:  can0-b-pins {
-		/* RX, TX */
-		pins = "GPIO_35", "GPIO_36";
-		function = "can0_b";
-	};
-
-	sgpio_a_pins: sgpio-a-pins {
-		/* SCK, D0, D1, LD */
-		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
-		function = "sgpio_a";
-	};
-};
-
-&can0 {
-	pinctrl-0 = <&can0_b_pins>;
-	pinctrl-names = "default";
-	status = "disabled"; /* Conflict with switch */
-};
-
-&flx3 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	usart3: serial@200 {
-		pinctrl-0 = <&fc3_b_pins>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-};
-
-&mdio1 {
-	status = "okay";
-};
-
-&phy0 {
-	status = "okay";
-};
-
-&phy1 {
-	status = "okay";
-};
-
-&port0 {
-	phy-handle = <&phy0>;
-	phy-mode = "gmii";
-	phys = <&serdes 0 CU(0)>;
-	status = "okay";
-};
-
-&port1 {
-	phy-handle = <&phy1>;
-	phy-mode = "gmii";
-	phys = <&serdes 1 CU(1)>;
-	status = "okay";
-};
-
-&serdes {
-	status = "okay";
-};
-
-&sgpio {
-	pinctrl-0 = <&sgpio_a_pins>;
-	pinctrl-names = "default";
-	microchip,sgpio-port-ranges = <0 3>, <8 11>;
-	status = "okay";
-
-	gpio@0 {
-		ngpios = <64>;
-	};
-	gpio@1 {
-		ngpios = <64>;
-	};
-};
-
-&switch {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/lan966x-pcb8309.dts
deleted file mode 100644
index c436cd20d4b4c..0000000000000
--- a/arch/arm/boot/dts/lan966x-pcb8309.dts
+++ /dev/null
@@ -1,216 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * lan966x_pcb8309.dts - Device Tree file for PCB8309
- */
-/dts-v1/;
-#include "lan966x.dtsi"
-#include "dt-bindings/phy/phy-lan966x-serdes.h"
-
-/ {
-	model = "Microchip EVB - LAN9662";
-	compatible = "microchip,lan9662-pcb8309", "microchip,lan9662", "microchip,lan966";
-
-	aliases {
-		serial0 = &usart3;
-		i2c102 = &i2c102;
-		i2c103 = &i2c103;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
-		priority = <200>;
-	};
-
-	i2c-mux {
-		compatible = "i2c-mux";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-controls = <&mux>;
-		i2c-parent = <&i2c4>;
-
-		i2c102: i2c-sfp@1 {
-			reg = <1>;
-		};
-
-		i2c103: i2c-sfp@2 {
-			reg = <2>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-s0-green {
-			label = "s0:green";
-			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-s0-red {
-			label = "s0:red";
-			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-s1-green {
-			label = "s1:green";
-			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-s1-red {
-			label = "s1:red";
-			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&sgpio_out 11 0 GPIO_ACTIVE_HIGH>, /* p11b0 */
-			    <&sgpio_out 11 1 GPIO_ACTIVE_HIGH>; /* p11b1 */
-	};
-
-	sfp2: sfp2 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c102>;
-		tx-disable-gpios = <&sgpio_out 10 0 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in  2 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in  2 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in  1 0 GPIO_ACTIVE_HIGH>;
-	};
-
-	sfp3: sfp3 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c103>;
-		tx-disable-gpios = <&sgpio_out 10 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in  3 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in  3 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in  1 1 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&aes {
-	status = "disabled"; /* Reserved by secure OS */
-};
-
-&flx3 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	usart3: serial@200 {
-		pinctrl-0 = <&fc3_b_pins>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-};
-
-&flx4 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c4: i2c@600 {
-		compatible = "microchip,sam9x60-i2c";
-		reg = <0x600 0x200>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&nic_clk>;
-		pinctrl-0 = <&fc4_b_pins>;
-		pinctrl-names = "default";
-		i2c-analog-filter;
-		i2c-digital-filter;
-		i2c-digital-filter-width-ns = <35>;
-		i2c-sda-hold-time-ns = <1500>;
-		status = "okay";
-	};
-};
-
-&gpio {
-	fc3_b_pins: fc3-b-pins {
-		/* RXD, TXD */
-		pins = "GPIO_52", "GPIO_53";
-		function = "fc3_b";
-	};
-
-	fc4_b_pins: fc4-b-pins {
-		/* SCL, SDA */
-		pins = "GPIO_57", "GPIO_58";
-		function = "fc4_b";
-	};
-
-	sgpio_a_pins: sgpio-a-pins {
-		/* SCK, D0, D1, LD */
-		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
-		function = "sgpio_a";
-	};
-};
-
-&mdio1 {
-	status = "okay";
-};
-
-&phy0 {
-	status = "okay";
-};
-
-&phy1 {
-	status = "okay";
-};
-
-&port0 {
-	phy-handle = <&phy0>;
-	phy-mode = "gmii";
-	phys = <&serdes 0 CU(0)>;
-	status = "okay";
-};
-
-&port1 {
-	phy-handle = <&phy1>;
-	phy-mode = "gmii";
-	phys = <&serdes 1 CU(1)>;
-	status = "okay";
-};
-
-&port2 {
-	sfp = <&sfp2>;
-	managed = "in-band-status";
-	phy-mode = "sgmii";
-	phys = <&serdes 2 SERDES6G(0)>;
-	status = "okay";
-};
-
-&port3 {
-	sfp = <&sfp3>;
-	managed = "in-band-status";
-	phy-mode = "sgmii";
-	phys = <&serdes 3 SERDES6G(1)>;
-	status = "okay";
-};
-
-&serdes {
-	status = "okay";
-};
-
-&sgpio {
-	pinctrl-0 = <&sgpio_a_pins>;
-	pinctrl-names = "default";
-	microchip,sgpio-port-ranges = <0 3>, <8 11>;
-	status = "okay";
-
-	gpio@0 {
-		ngpios = <64>;
-	};
-	gpio@1 {
-		ngpios = <64>;
-	};
-};
-
-&switch {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
deleted file mode 100644
index 05b73f7cf0c77..0000000000000
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ /dev/null
@@ -1,615 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * lan966x.dtsi - Device Tree Include file for Microchip LAN966 family SoC
- *
- * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
- *
- * Author: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
- *
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/mfd/atmel-flexcom.h>
-#include <dt-bindings/dma/at91.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/microchip,lan966x.h>
-
-/ {
-	model = "Microchip LAN966 family SoC";
-	compatible = "microchip,lan966";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			clock-frequency = <600000000>;
-			reg = <0x0>;
-		};
-	};
-
-	clocks {
-		sys_clk: sys_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <165625000>;
-		};
-
-		cpu_clk: cpu_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <600000000>;
-		};
-
-		ddr_clk: ddr_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <300000000>;
-		};
-
-		nic_clk: nic_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-	};
-
-	clks: clock-controller@e00c00a8 {
-		compatible = "microchip,lan966x-gck";
-		#clock-cells = <1>;
-		clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
-		clock-names = "cpu", "ddr", "sys";
-		reg = <0xe00c00a8 0x38>, <0xe00c02cc 0x4>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <37500000>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		udc: usb@200000 {
-			compatible = "microchip,lan9662-udc",
-				     "atmel,sama5d3-udc";
-			reg = <0x00200000 0x80000>,
-			      <0xe0808000 0x400>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
-			clock-names = "pclk", "hclk";
-			status = "disabled";
-		};
-
-		switch: switch@e0000000 {
-			compatible = "microchip,lan966x-switch";
-			reg = <0xe0000000 0x0100000>,
-			      <0xe2000000 0x0800000>;
-			reg-names = "cpu", "gcb";
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "xtr", "fdma", "ana", "ptp",
-					  "ptp-ext";
-			resets = <&reset 0>;
-			reset-names = "switch";
-			status = "disabled";
-
-			ethernet-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port0: port@0 {
-					reg = <0>;
-					status = "disabled";
-				};
-
-				port1: port@1 {
-					reg = <1>;
-					status = "disabled";
-				};
-
-				port2: port@2 {
-					reg = <2>;
-					status = "disabled";
-				};
-
-				port3: port@3 {
-					reg = <3>;
-					status = "disabled";
-				};
-
-				port4: port@4 {
-					reg = <4>;
-					status = "disabled";
-				};
-
-				port5: port@5 {
-					reg = <5>;
-					status = "disabled";
-				};
-
-				port6: port@6 {
-					reg = <6>;
-					status = "disabled";
-				};
-
-				port7: port@7 {
-					reg = <7>;
-					status = "disabled";
-				};
-			};
-		};
-
-		otp: otp@e0021000 {
-			compatible = "microchip,lan9668-otpc", "microchip,lan9662-otpc";
-			reg = <0xe0021000 0x300>;
-		};
-
-		flx0: flexcom@e0040000 {
-			compatible = "atmel,sama5d2-flexcom";
-			reg = <0xe0040000 0x100>;
-			clocks = <&clks GCK_ID_FLEXCOM0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xe0040000 0x800>;
-			status = "disabled";
-
-			usart0: serial@200 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0x200 0x200>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				clock-names = "usart";
-				atmel,fifo-size = <32>;
-				status = "disabled";
-			};
-
-			spi0: spi@400 {
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0x400 0x200>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				clock-names = "spi_clk";
-				atmel,fifo-size = <32>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@600 {
-				compatible = "microchip,sam9x60-i2c";
-				reg = <0x600 0x200>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		flx1: flexcom@e0044000 {
-			compatible = "atmel,sama5d2-flexcom";
-			reg = <0xe0044000 0x100>;
-			clocks = <&clks GCK_ID_FLEXCOM1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xe0044000 0x800>;
-			status = "disabled";
-
-			usart1: serial@200 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0x200 0x200>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				clock-names = "usart";
-				atmel,fifo-size = <32>;
-				status = "disabled";
-			};
-
-			spi1: spi@400 {
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0x400 0x200>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				clock-names = "spi_clk";
-				atmel,fifo-size = <32>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@600 {
-				compatible = "microchip,sam9x60-i2c";
-				reg = <0x600 0x200>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		trng: rng@e0048000 {
-			compatible = "atmel,at91sam9g45-trng";
-			reg = <0xe0048000 0x100>;
-			clocks = <&nic_clk>;
-		};
-
-		aes: crypto@e004c000 {
-			compatible = "atmel,at91sam9g46-aes";
-			reg = <0xe004c000 0x100>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
-			       <&dma0 AT91_XDMAC_DT_PERID(13)>;
-			dma-names = "tx", "rx";
-			clocks = <&nic_clk>;
-			clock-names = "aes_clk";
-		};
-
-		flx2: flexcom@e0060000 {
-			compatible = "atmel,sama5d2-flexcom";
-			reg = <0xe0060000 0x100>;
-			clocks = <&clks GCK_ID_FLEXCOM2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xe0060000 0x800>;
-			status = "disabled";
-
-			usart2: serial@200 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0x200 0x200>;
-				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				clock-names = "usart";
-				atmel,fifo-size = <32>;
-				status = "disabled";
-			};
-
-			spi2: spi@400 {
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0x400 0x200>;
-				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				clock-names = "spi_clk";
-				atmel,fifo-size = <32>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@600 {
-				compatible = "microchip,sam9x60-i2c";
-				reg = <0x600 0x200>;
-				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		flx3: flexcom@e0064000 {
-			compatible = "atmel,sama5d2-flexcom";
-			reg = <0xe0064000 0x100>;
-			clocks = <&clks GCK_ID_FLEXCOM3>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xe0064000 0x800>;
-			status = "disabled";
-
-			usart3: serial@200 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0x200 0x200>;
-				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				clock-names = "usart";
-				atmel,fifo-size = <32>;
-				status = "disabled";
-			};
-
-			spi3: spi@400 {
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0x400 0x200>;
-				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				clock-names = "spi_clk";
-				atmel,fifo-size = <32>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@600 {
-				compatible = "microchip,sam9x60-i2c";
-				reg = <0x600 0x200>;
-				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		dma0: dma-controller@e0068000 {
-			compatible = "microchip,sama7g5-dma";
-			reg = <0xe0068000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			clocks = <&nic_clk>;
-			clock-names = "dma_clk";
-		};
-
-		sha: crypto@e006c000 {
-			compatible = "atmel,at91sam9g46-sha";
-			reg = <0xe006c000 0xec>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>;
-			dma-names = "tx";
-			clocks = <&nic_clk>;
-			clock-names = "sha_clk";
-		};
-
-		flx4: flexcom@e0070000 {
-			compatible = "atmel,sama5d2-flexcom";
-			reg = <0xe0070000 0x100>;
-			clocks = <&clks GCK_ID_FLEXCOM4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xe0070000 0x800>;
-			status = "disabled";
-
-			usart4: serial@200 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0x200 0x200>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				clock-names = "usart";
-				atmel,fifo-size = <32>;
-				status = "disabled";
-			};
-
-			spi4: spi@400 {
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0x400 0x200>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				clock-names = "spi_clk";
-				atmel,fifo-size = <32>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c4: i2c@600 {
-				compatible = "microchip,sam9x60-i2c";
-				reg = <0x600 0x200>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
-				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
-				dma-names = "tx", "rx";
-				clocks = <&nic_clk>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		timer0: timer@e008c000 {
-			compatible = "snps,dw-apb-timer";
-			reg = <0xe008c000 0x400>;
-			clocks = <&nic_clk>;
-			clock-names = "timer";
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		watchdog: watchdog@e0090000 {
-			compatible = "snps,dw-wdt";
-			reg = <0xe0090000 0x1000>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&nic_clk>;
-			status = "disabled";
-		};
-
-		cpu_ctrl: syscon@e00c0000 {
-			compatible = "microchip,lan966x-cpu-syscon", "syscon";
-			reg = <0xe00c0000 0x350>;
-		};
-
-		can0: can@e081c000 {
-			compatible = "bosch,m_can";
-			reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
-			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "int0", "int1";
-			clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>;
-			clock-names = "hclk", "cclk";
-			assigned-clocks = <&clks GCK_ID_MCAN0>;
-			assigned-clock-rates = <40000000>;
-			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
-			status = "disabled";
-		};
-
-		can1: can@e0820000 {
-			compatible = "bosch,m_can";
-			reg = <0xe0820000 0xfc>, <0x00100000 0x8000>;
-			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "int0", "int1";
-			clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>;
-			clock-names = "hclk", "cclk";
-			assigned-clocks = <&clks GCK_ID_MCAN1>;
-			assigned-clock-rates = <40000000>;
-			bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>;
-			status = "disabled";
-		};
-
-		reset: reset-controller@e200400c {
-			compatible = "microchip,lan966x-switch-reset";
-			reg = <0xe200400c 0x4>;
-			reg-names = "gcb";
-			#reset-cells = <1>;
-			cpu-syscon = <&cpu_ctrl>;
-		};
-
-		gpio: pinctrl@e2004064 {
-			compatible = "microchip,lan966x-pinctrl";
-			reg = <0xe2004064 0xb4>,
-			    <0xe2010024 0x138>;
-			resets = <&reset 0>;
-			reset-names = "switch";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&gpio 0 0 78>;
-			interrupt-controller;
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <2>;
-		};
-
-		mdio0: mdio@e2004118 {
-			compatible = "microchip,lan966x-miim";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xe2004118 0x24>;
-			clocks = <&sys_clk>;
-			status = "disabled";
-		};
-
-		mdio1: mdio@e200413c {
-			compatible = "microchip,lan966x-miim";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xe200413c 0x24>,
-			      <0xe2010020 0x4>;
-			clocks = <&sys_clk>;
-			status = "disabled";
-
-			phy0: ethernet-phy@1 {
-				reg = <1>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			phy1: ethernet-phy@2 {
-				reg = <2>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		sgpio: gpio@e2004190 {
-			compatible = "microchip,sparx5-sgpio";
-			reg = <0xe2004190 0x118>;
-			clocks = <&sys_clk>;
-			resets = <&reset 0>;
-			reset-names = "switch";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sgpio_in: gpio@0 {
-				compatible = "microchip,sparx5-sgpio-bank";
-				reg = <0>;
-				gpio-controller;
-				#gpio-cells = <3>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <3>;
-			};
-
-			sgpio_out: gpio@1 {
-				compatible = "microchip,sparx5-sgpio-bank";
-				reg = <1>;
-				gpio-controller;
-				#gpio-cells = <3>;
-			};
-		};
-
-		hwmon: hwmon@e2010180 {
-			compatible = "microchip,lan9668-hwmon";
-			reg = <0xe2010180 0xc>,
-			      <0xe20042a8 0xc>;
-			reg-names = "pvt", "fan";
-			clocks = <&sys_clk>;
-		};
-
-		serdes: serdes@e202c000 {
-			compatible = "microchip,lan966x-serdes";
-			reg = <0xe202c000 0x9c>,
-			      <0xe2004010 0x4>;
-			#phy-cells = <2>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@e8c11000 {
-			compatible = "arm,gic-400", "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			reg = <0xe8c11000 0x1000>,
-			      <0xe8c12000 0x2000>,
-			      <0xe8c14000 0x2000>,
-			      <0xe8c16000 0x2000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
deleted file mode 100644
index 3240c67e0c392..0000000000000
--- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "logicpd-som-lv.dtsi"
-#include "logicpd-som-lv-baseboard.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
-	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
-			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
-			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
-			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
-			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
-			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
deleted file mode 100644
index c757f0d7781c1..0000000000000
--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "logicpd-som-lv.dtsi"
-#include "logicpd-som-lv-baseboard.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
-	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
deleted file mode 100644
index 7d0468a237818..0000000000000
--- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/ {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_key_pins>;
-
-		sysboot2 {
-			label = "gpio3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;	/* gpio_111 / uP_GPIO_3 */
-			linux,code = <BTN_0>;
-			wakeup-source;
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "omap3logic";
-		ti,mcbsp = <&mcbsp2>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins &led_pins_wkup>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;	/* gpio133 */
-			linux,default-trigger = "cpu0";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;	/* gpio11 */
-			linux,default-trigger = "none";
-		};
-	};
-};
-
-&vaux1 {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-};
-
-&vaux4 {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&mcbsp2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-};
-
-&charger {
-	ti,bb-uvolt = <3200000>;
-	ti,bb-uamp = <150>;
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
-		  1 0 0x2c000000 0x1000000	/* CS1: 16MB for LAN9221 */
-		  2 0 0x10000000 0x2000000>;    /* CS2: 32MB for NOR */
-
-	ethernet@gpmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&lan9221_pins>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;		/* gpio_152 */
-		reg = <1 0 0xff>;
-	};
-};
-
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "okay";
-	vdds_dsi-supply = <&vpll2>;
-	vdda_video-supply = <&video_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins1>;
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <16>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	video_reg: video_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	lcd0: display {
-		/* This isn't the exact LCD, but the timings meet spec */
-		compatible = "logicpd,type28";
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_enable_pin>;
-		backlight = <&bl>;
-		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	bl: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-		pwms = <&twl_pwm 0 5000000>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */
-	};
-};
-
-&mmc1 {
-	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;		/* gpio_126 */
-	cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;			/* gpio_110 */
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	cap-power-off-card;
-};
-
-&omap3_pmx_core {
-	gpio_key_pins: pinmux_gpio_key_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_xclkb.gpio_111 / uP_GPIO_3*/
-		>;
-	};
-
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */
-		>;
-	};
-
-	lan9221_pins: pinmux_lan9221_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 */
-			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
-		>;
-	};
-
-	lcd_enable_pin: pinmux_lcd_enable_pin {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
-		>;
-	};
-
-	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
-
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	led_pins_wkup: pinmux_led_pins_wkup {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 / uP_GPIO_1 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */
-		>;
-	};
-};
-
-
-&uart1 {
-	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
-};
-
-/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb_otg_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
deleted file mode 100644
index 9ba0ea4eb48a8..0000000000000
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ /dev/null
@@ -1,296 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0>;
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 3 0>;   /* gpio_3 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		vin-supply = <&vaux3>;
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb2_phy: hsusb2_phy {
-		pinctrl-names = "default";
-		pinctrl-0 = <&hsusb2_reset_pin>;
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
-		#phy-cells = <0>;
-	};
-
-	/* fixed 26MHz oscillator */
-	hfclk_26m: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,device-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-		clocks = <&hfclk_26m>;
-		clock-names = "fck";
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-				ti,hs_extmute_gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-	clock-frequency = <400000>;
-
-	touchscreen: tsc2004@48 {
-		compatible = "ti,tsc2004";
-		reg = <0x48>;
-		vio-supply = <&vaux1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsc2004_pins>;
-		interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
-
-		touchscreen-fuzz-x = <4>;
-		touchscreen-fuzz-y = <7>;
-		touchscreen-fuzz-pressure = <2>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-		touchscreen-max-pressure = <2048>;
-
-		ti,x-plate-ohms = <280>;
-		ti,esd-recovery-timeout-ms = <8000>;
-	};
-};
-
-&mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
-	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
-	pinctrl-names = "default";
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1273";
-		reg = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 2 */
-		ref-clock-frequency = <26000000>;
-	};
-};
-
-&usbhshost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_pins>;
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&omap3_pmx_core {
-
-	mmc3_pins: pinmux_mm3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
-			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
-			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs2.sdmmc_clk */
-		>;
-	};
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
-			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
-			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */
-			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
-		>;
-	};
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
-		>;
-	};
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs1.hsusb2_data3 */
-		>;
-	};
-
-	hsusb_otg_pins: pinmux_hsusb_otg_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
-			OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)        /* gpmc_ncs6.gpio_57 */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
-			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	tsc2004_pins: pinmux_tsc2004_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4)	/* mcbsp4_dr.gpio_153 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-
-	hsusb2_reset_pin: pinmux_hsusb1_reset_pin {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
-		>;
-	};
-	wl127x_gpio: pinmux_wl127x_gpio_pin {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4)		/* sys_boot0.gpio_2 */
-			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
-		>;
-	};
-};
-
-&uart2 {
-	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&vaux3 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&twl {
-	twl_power: power {
-		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
-		ti,use_poweroff;
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
deleted file mode 100644
index cb08aa62d9671..0000000000000
--- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "logicpd-torpedo-som.dtsi"
-#include "logicpd-torpedo-baseboard.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-	model = "LogicPD Zoom OMAP35xx Torpedo Development Kit";
-	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core {
-	isp1763_pins: pinmux_isp1763_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2154,  PIN_INPUT_PULLUP | MUX_MODE4)	/* sdmmc1_dat6.gpio_128 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
deleted file mode 100644
index b5536132971fb..0000000000000
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/dts-v1/;
-
-/*
- * There are two types of 4.3" LCD, Type 15 and Type 28.
- * By default, type 15 was used.  This device tree file
- * uses the timing for the type 28 LCD
- */
-
-#include "logicpd-torpedo-37xx-devkit.dts"
-
-&lcd0 {
-	compatible = "logicpd,type28";
-};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
deleted file mode 100644
index 07ea822fe4052..0000000000000
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "logicpd-torpedo-som.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-#include "logicpd-torpedo-baseboard.dtsi"
-
-/ {
-	model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit";
-	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio5 29 0>;   /* gpio157 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		vin-supply = <&vmmc2>;
-	};
-};
-
-/*
- * Only found on the wireless SOM. For the SOM without wireless, the pins for
- * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
- * gpio157 is not connected. So this should be OK to keep common for now,
- * probably device tree overlays is the way to go with the various SOM and
- * jumpering combinations for the long run.
- */
-&mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
-	pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
-	pinctrl-names = "default";
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1283";
-		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_EDGE_RISING>; /* gpio 152 */
-		ref-clock-frequency = <26000000>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
-
-&uart2 {
-	/delete-property/dma-names;
-	bluetooth {
-		compatible = "ti,wl1283-st";
-		enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */
-		max-speed = <3000000>;
-	};
-};
-
-/* The DM3730 has a faster L3 than OMAP35, so increase pixel clock */
-&mt9p031_out {
-	pixel-clock-frequency = <90000000>;
-};
-
-&omap3_pmx_core {
-	mmc3_pins: pinmux_mm3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
-			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_fsr.gpio_157 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	mmc3_core2_pins: pinmux_mmc3_core2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)   /* etk_clk.sdmmc3_clk */
-			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)   /* etk_ctl.sdmmc3_cmd */
-		>;
-	};
-};
-
-/* The gpio muxing between omap3530 and dm3730 is different for GPIO_128 */
-&omap3_pmx_wkup {
-	isp1763_pins: pinmux_isp1763_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a58, PIN_INPUT_PULLUP | MUX_MODE4)	/* reserved.gpio_128 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
deleted file mode 100644
index e0cbac500e172..0000000000000
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ /dev/null
@@ -1,420 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/ {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
-
-		sysboot2 {
-			label = "sysboot2";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;	/* gpio2 */
-			linux,code = <BTN_0>;
-			wakeup-source;
-		};
-
-		sysboot5 {
-			label = "sysboot5";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;	/* gpio7 */
-			linux,code = <BTN_1>;
-			wakeup-source;
-		};
-
-		gpio1 {
-			label = "gpio1";
-			gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;	/* gpio181 */
-			linux,code = <BTN_2>;
-			wakeup-source;
-		};
-
-		gpio2 {
-			label = "gpio2";
-			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;	/* gpio178 */
-			linux,code = <BTN_3>;
-			wakeup-source;
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "omap3logic";
-		ti,mcbsp = <&mcbsp2>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;	/* gpio180 */
-			linux,default-trigger = "cpu0";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;	/* gpio179 */
-			linux,default-trigger = "none";
-		};
-	};
-
-	pwm10: pwm-10 {
-		compatible = "ti,omap-dmtimer-pwm";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm_pins>;
-		ti,timers = <&timer10>;
-		#pwm-cells = <3>;
-		ti,clock-source = <0x01>;
-	};
-
-};
-
-&vaux1 {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-};
-
-&vaux4 {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&charger {
-	ti,bb-uvolt = <3200000>;
-	ti,bb-uamp = <150>;
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
-		  1 0 0x2c000000 0x1000000	/* CS1: 16MB for LAN9221 */
-		  6 0 0x28000000 0x1000000>;	/* CS6: 16MB for ISP1763 */
-
-	ethernet@gpmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&lan9221_pins>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;		/* gpio129 */
-		reg = <1 0 0xff>;
-	};
-
-	usb@6,0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&isp1763_pins>;
-		compatible = "nxp,usb-isp1763";
-		reg = <0x6 0x0 0xff>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "host";
-		bus-width = <16>;
-		dr_mode = "host";
-		gpmc,mux-add-data = <0>;
-		gpmc,device-width = <2>;
-		gpmc,wait-pin = <0>;
-		gpmc,burst-length = <4>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <45>;
-		gpmc,cs-wr-off-ns = <45>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <0>;
-		gpmc,adv-wr-off-ns = <0>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <45>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <25>;
-		gpmc,rd-cycle-ns = <60>;
-		gpmc,wr-cycle-ns = <45>;
-		gpmc,access-ns = <35>;
-		gpmc,page-burst-access-ns = <0>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <60>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <5>;
-		gpmc,wr-access-ns = <20>;
-	};
-};
-
-&hdqw1w {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdq_pins>;
-};
-
-
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "okay";
-	vdds_dsi-supply = <&vpll2>;
-	vdda_video-supply = <&vpll2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins1>;
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <16>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	lcd0: display {
-		/* This isn't the exact LCD, but the timings meet spec */
-		compatible = "newhaven,nhd-4.3-480272ef-atxl";
-		label = "15";
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_pwr_pins>;
-		backlight = <&bl>;
-		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	bl: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-		pwms = <&pwm10 0 5000000 0>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
-	};
-};
-
-&mmc1 {
-	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
-	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>;		/* gpio127 */
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	cap-power-off-card;
-};
-
-&omap3_pmx_core {
-	gpio_key_pins: pinmux_gpio_key_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcspi2_clk.gpio_178 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcspi2_cs0.gpio_181 */
-		>;
-	};
-
-	hdq_pins: hdq_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* hdq_sio */
-		>;
-	};
-
-	pwm_pins: pinmux_pwm_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)       /* gpmc_ncs5.gpt_10_pwm_evt */
-		>;
-	};
-
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4)	/* gpio_179 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4)	/* gpio_180 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	tsc2004_pins: pinmux_tsc2004_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4)	/* mcbsp4_dr.gpio_153 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_dx.gpio_154 */
-		>;
-	};
-
-	isp_pins: pinmux_isp_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0)   /* cam_hs.cam_hs */
-			OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0)   /* cam_vs.cam_vs */
-			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0)   /* cam_xclka.cam_xclka */
-			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0)   /* cam_pclk.cam_pclk */
-
-			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
-			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
-			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
-			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0)   /* cam_d3.cam_d3 */
-			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0)   /* cam_d4.cam_d4 */
-			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0)   /* cam_d5.cam_d5 */
-			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0)   /* cam_d6.cam_d6 */
-			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0)   /* cam_d7.cam_d7 */
-		>;
-	};
-
-	panel_pwr_pins: pinmux_panel_pwr_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
-		>;
-	};
-
-	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
-
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data17.dss_data17 */
-
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data18.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data19.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data20.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data21.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data22.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data23.dss_data5 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_boot0.gpio_2 */
-			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_boot5.gpio_7 */
-		>;
-	};
-
-	lan9221_pins: pinmux_lan9221_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)		/* reserved.gpio_129 */
-		>;
-	};
-
-	mmc1_cd: pinmux_mmc1_cd {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4)	/* reserved.gpio_127 */
-		>;
-	};
-};
-
-&i2c2 {
-	mt9p031@48 {
-		compatible = "aptina,mt9p031";
-		reg = <0x48>;
-		clocks = <&isp 0>;
-		vaa-supply = <&vaux4>;
-		vdd-supply = <&vaux4>;
-		vdd_io-supply = <&vaux4>;
-		port {
-			mt9p031_out: endpoint {
-				input-clock-frequency = <24000000>;
-				pixel-clock-frequency = <72000000>;
-				remote-endpoint = <&ccdc_ep>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	touchscreen: tsc2004@48 {
-		compatible = "ti,tsc2004";
-		reg = <0x48>;
-		vio-supply = <&vaux1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsc2004_pins>;
-		interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
-
-		touchscreen-fuzz-x = <4>;
-		touchscreen-fuzz-y = <7>;
-		touchscreen-fuzz-pressure = <2>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-		touchscreen-max-pressure = <2048>;
-
-		ti,x-plate-ohms = <280>;
-		ti,esd-recovery-timeout-ms = <8000>;
-	};
-};
-
-&mcspi1 {
-	at25@0 {
-		compatible = "atmel,at25";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-		spi-cpha;
-		spi-cpol;
-
-		pagesize = <64>;
-		size = <32768>;
-		address-width = <16>;
-	};
-};
-
-&isp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&isp_pins>;
-	ports {
-		port@0 {
-			reg = <0>;
-			ccdc_ep: endpoint {
-				remote-endpoint = <&mt9p031_out>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				pclk-sample = <0>;
-			};
-		};
-	};
-};
-
-&uart1 {
-	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
-};
-
-/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb_otg_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
deleted file mode 100644
index 72b5af475d09c..0000000000000
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ /dev/null
@@ -1,203 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-user0 {
-			label = "user0";
-			gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* LEDA */
-			linux,default-trigger = "none";
-		};
-	};
-
-	/* fixed 26MHz oscillator */
-	hfclk_26m: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-};
-
-/* The Torpedo doesn't route the USB host pins */
-&usbhshost {
-	status = "disabled";
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,device-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-		clocks = <&hfclk_26m>;
-		clock-names = "fck";
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-	clock-frequency = <400000>;
-	at24@50 {
-		compatible = "atmel,24c64";
-		readonly;
-		reg = <0x50>;
-	};
-};
-
-&omap3_pmx_core {
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
-			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
-			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */
-			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
-		>;
-	};
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
-		>;
-	};
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-	hsusb_otg_pins: pinmux_hsusb_otg_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-		>;
-	};
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
-		>;
-	};
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
-			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-};
-
-&uart2 {
-	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&twl {
-	twl_power: power {
-		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
-		ti,use_poweroff;
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&twl_keypad {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
deleted file mode 100644
index 1bb686a7b3ec9..0000000000000
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * Common base for NXP LPC18xx and LPC43xx devices.
- *
- * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
- *
- * This code is released using a dual license strategy: BSD/GPL
- * You can choose the licence that better fits your requirements.
- *
- * Released under the terms of 3-clause BSD License
- * Released under the terms of GNU General Public License Version 2.0
- *
- */
-
-#include "armv7-m.dtsi"
-
-#include "dt-bindings/clock/lpc18xx-cgu.h"
-#include "dt-bindings/clock/lpc18xx-ccu.h"
-
-#define LPC_PIN(port, pin)	(0x##port * 32 + pin)
-#define LPC_GPIO(port, pin)	(port * 32 + pin)
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-m3";
-			device_type = "cpu";
-			reg = <0x0>;
-			clocks = <&ccu1 CLK_CPU_CORE>;
-		};
-	};
-
-	clocks {
-		xtal: xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-
-		xtal32: xtal32 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-
-		enet_rx_clk: enet_rx_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "enet_rx_clk";
-		};
-
-		enet_tx_clk: enet_tx_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "enet_tx_clk";
-		};
-
-		gp_clkin: gp_clkin {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "gp_clkin";
-		};
-	};
-
-	soc {
-		sct_pwm: pwm@40000000 {
-			compatible = "nxp,lpc1850-sct-pwm";
-			reg = <0x40000000 0x1000>;
-			clocks =<&ccu1 CLK_CPU_SCT>;
-			clock-names = "pwm";
-			resets = <&rgu 37>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		dmac: dma-controller@40002000 {
-			compatible = "arm,pl080", "arm,primecell";
-			arm,primecell-periphid = <0x00041080>;
-			reg = <0x40002000 0x1000>;
-			interrupts = <2>;
-			clocks = <&ccu1 CLK_CPU_DMA>;
-			clock-names = "apb_pclk";
-			resets = <&rgu 19>;
-			#dma-cells = <2>;
-			dma-channels = <8>;
-			dma-requests = <16>;
-			lli-bus-interface-ahb1;
-			lli-bus-interface-ahb2;
-			mem-bus-interface-ahb1;
-			mem-bus-interface-ahb2;
-			memcpy-burst-size = <256>;
-			memcpy-bus-width = <32>;
-		};
-
-		spifi: flash-controller@40003000 {
-			compatible = "nxp,lpc1773-spifi";
-			reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
-			reg-names = "spifi", "flash";
-			interrupts = <30>;
-			clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
-			clock-names = "spifi", "reg";
-			resets = <&rgu 53>;
-			status = "disabled";
-		};
-
-		mmcsd: mmcsd@40004000 {
-			compatible = "snps,dw-mshc";
-			reg = <0x40004000 0x1000>;
-			interrupts = <6>;
-			clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
-			clock-names = "ciu", "biu";
-			resets = <&rgu 20>;
-			status = "disabled";
-		};
-
-		usb0: usb@40006100 {
-			compatible = "nxp,lpc1850-ehci", "generic-ehci";
-			reg = <0x40006100 0x100>;
-			interrupts = <8>;
-			clocks = <&ccu1 CLK_CPU_USB0>;
-			resets = <&rgu 17>;
-			phys = <&usb0_otg_phy>;
-			phy-names = "usb";
-			has-transaction-translator;
-			status = "disabled";
-		};
-
-		usb1: usb@40007100 {
-			compatible = "nxp,lpc1850-ehci", "generic-ehci";
-			reg = <0x40007100 0x100>;
-			interrupts = <9>;
-			clocks = <&ccu1 CLK_CPU_USB1>;
-			resets = <&rgu 18>;
-			status = "disabled";
-		};
-
-		emc: memory-controller@40005000 {
-			compatible = "arm,pl172", "arm,primecell";
-			reg = <0x40005000 0x1000>;
-			clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
-			clock-names = "mpmcclk", "apb_pclk";
-			resets = <&rgu 21>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x1c000000 0x1000000
-				  1 0 0x1d000000 0x1000000
-				  2 0 0x1e000000 0x1000000
-				  3 0 0x1f000000 0x1000000>;
-			status = "disabled";
-		};
-
-		lcdc: lcd-controller@40008000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0x40008000 0x1000>;
-			interrupts = <7>;
-			interrupt-names = "combined";
-			clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
-			clock-names = "clcdclk", "apb_pclk";
-			resets = <&rgu 16>;
-			status = "disabled";
-		};
-
-		eeprom: eeprom@4000e000 {
-			compatible = "nxp,lpc1857-eeprom";
-			reg = <0x4000e000 0x1000>, <0x20040000 0x4000>;
-			reg-names = "reg", "mem";
-			clocks = <&ccu1 CLK_CPU_EEPROM>;
-			clock-names = "eeprom";
-			resets = <&rgu 27>;
-			interrupts = <4>;
-			status = "disabled";
-		};
-
-		mac: ethernet@40010000 {
-			compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
-			reg = <0x40010000 0x2000>;
-			interrupts = <5>;
-			interrupt-names = "macirq";
-			clocks = <&ccu1 CLK_CPU_ETHERNET>;
-			clock-names = "stmmaceth";
-			resets = <&rgu 22>;
-			reset-names = "stmmaceth";
-			rx-fifo-depth = <256>;
-			tx-fifo-depth = <256>;
-			snps,pbl = <4>; /* 32 (8x mode) */
-			snps,force_thresh_dma_mode;
-			status = "disabled";
-		};
-
-		creg: syscon@40043000 {
-			compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
-			reg = <0x40043000 0x1000>;
-			clocks = <&ccu1 CLK_CPU_CREG>;
-			resets = <&rgu 5>;
-
-			creg_clk: clock-controller {
-				compatible = "nxp,lpc1850-creg-clk";
-				clocks = <&xtal32>;
-				#clock-cells = <1>;
-			};
-
-			usb0_otg_phy: phy {
-				compatible = "nxp,lpc1850-usb-otg-phy";
-				clocks = <&ccu1 CLK_USB0>;
-				#phy-cells = <0>;
-			};
-
-			dmamux: dma-mux {
-				compatible = "nxp,lpc1850-dmamux";
-				#dma-cells = <3>;
-				dma-requests = <64>;
-				dma-masters = <&dmac>;
-			};
-		};
-
-		rtc: rtc@40046000 {
-			compatible = "nxp,lpc1850-rtc", "nxp,lpc1788-rtc";
-			reg = <0x40046000 0x1000>;
-			interrupts = <47>;
-			clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
-			clock-names = "rtc", "reg";
-		};
-
-		cgu: clock-controller@40050000 {
-			compatible = "nxp,lpc1850-cgu";
-			reg = <0x40050000 0x1000>;
-			#clock-cells = <1>;
-			clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
-		};
-
-		ccu1: clock-controller@40051000 {
-			compatible = "nxp,lpc1850-ccu";
-			reg = <0x40051000 0x1000>;
-			#clock-cells = <1>;
-			clocks = <&cgu BASE_APB3_CLK>,   <&cgu BASE_APB1_CLK>,
-				 <&cgu BASE_SPIFI_CLK>,  <&cgu BASE_CPU_CLK>,
-				 <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
-				 <&cgu BASE_USB1_CLK>,   <&cgu BASE_SPI_CLK>;
-			clock-names = "base_apb3_clk",   "base_apb1_clk",
-				      "base_spifi_clk",  "base_cpu_clk",
-				      "base_periph_clk", "base_usb0_clk",
-				      "base_usb1_clk",   "base_spi_clk";
-		};
-
-		ccu2: clock-controller@40052000 {
-			compatible = "nxp,lpc1850-ccu";
-			reg = <0x40052000 0x1000>;
-			#clock-cells = <1>;
-			clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
-				 <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
-				 <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
-				 <&cgu BASE_SSP0_CLK>,  <&cgu BASE_SDIO_CLK>;
-			clock-names = "base_audio_clk", "base_uart3_clk",
-				      "base_uart2_clk", "base_uart1_clk",
-				      "base_uart0_clk", "base_ssp1_clk",
-				      "base_ssp0_clk",  "base_sdio_clk";
-		};
-
-		rgu: reset-controller@40053000 {
-			compatible = "nxp,lpc1850-rgu";
-			reg = <0x40053000 0x1000>;
-			clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
-			clock-names = "delay", "reg";
-			#reset-cells = <1>;
-		};
-
-		watchdog@40080000 {
-			compatible = "nxp,lpc1850-wwdt";
-			reg = <0x40080000 0x24>;
-			interrupts = <49>;
-			clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
-			clock-names = "wdtclk", "reg";
-		};
-
-		uart0: serial@40081000 {
-			compatible = "nxp,lpc1850-uart", "ns16550a";
-			reg = <0x40081000 0x1000>;
-			reg-shift = <2>;
-			interrupts = <24>;
-			clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
-			clock-names = "uartclk", "reg";
-			resets = <&rgu 44>;
-			dmas = <&dmamux  1 1 2
-				&dmamux  2 1 2
-				&dmamux 11 2 2
-				&dmamux 12 2 2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			status = "disabled";
-		};
-
-		uart1: serial@40082000 {
-			compatible = "nxp,lpc1850-uart", "ns16550a";
-			reg = <0x40082000 0x1000>;
-			reg-shift = <2>;
-			interrupts = <25>;
-			clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
-			clock-names = "uartclk", "reg";
-			resets = <&rgu 45>;
-			dmas = <&dmamux 3 1 2
-				&dmamux 4 1 2>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		ssp0: spi@40083000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x40083000 0x1000>;
-			interrupts = <22>;
-			clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>;
-			clock-names = "sspclk", "apb_pclk";
-			resets = <&rgu 50>;
-			dmas = <&dmamux  9 0 2
-				&dmamux 10 0 2>;
-			dma-names = "rx", "tx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		timer0: timer@40084000 {
-			compatible = "nxp,lpc3220-timer";
-			reg = <0x40084000 0x1000>;
-			interrupts = <12>;
-			clocks = <&ccu1 CLK_CPU_TIMER0>;
-			clock-names = "timerclk";
-			resets = <&rgu 32>;
-		};
-
-		timer1: timer@40085000 {
-			compatible = "nxp,lpc3220-timer";
-			reg = <0x40085000 0x1000>;
-			interrupts = <13>;
-			clocks = <&ccu1 CLK_CPU_TIMER1>;
-			clock-names = "timerclk";
-			resets = <&rgu 33>;
-		};
-
-		pinctrl: pinctrl@40086000 {
-			compatible = "nxp,lpc1850-scu";
-			reg = <0x40086000 0x1000>;
-			clocks = <&ccu1 CLK_CPU_SCU>;
-		};
-
-		i2c0: i2c@400a1000 {
-			compatible = "nxp,lpc1788-i2c";
-			reg = <0x400a1000 0x1000>;
-			interrupts = <18>;
-			clocks = <&ccu1 CLK_APB1_I2C0>;
-			resets = <&rgu 48>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		can1: can@400a4000 {
-			compatible = "bosch,c_can";
-			reg = <0x400a4000 0x1000>;
-			interrupts = <43>;
-			clocks = <&ccu1 CLK_APB1_CAN1>;
-			resets = <&rgu 54>;
-			status = "disabled";
-		};
-
-		uart2: serial@400c1000 {
-			compatible = "nxp,lpc1850-uart", "ns16550a";
-			reg = <0x400c1000 0x1000>;
-			reg-shift = <2>;
-			interrupts = <26>;
-			clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>;
-			clock-names = "uartclk", "reg";
-			resets = <&rgu 46>;
-			dmas = <&dmamux 5 1 2
-				&dmamux 6 1 2>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		uart3: serial@400c2000 {
-			compatible = "nxp,lpc1850-uart", "ns16550a";
-			reg = <0x400c2000 0x1000>;
-			reg-shift = <2>;
-			interrupts = <27>;
-			clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>;
-			clock-names = "uartclk", "reg";
-			resets = <&rgu 47>;
-			dmas = <&dmamux  7 1 2
-				&dmamux  8 1 2
-				&dmamux 13 3 2
-				&dmamux 14 3 2>;
-			dma-names = "tx", "rx", "rx", "tx";
-			status = "disabled";
-		};
-
-		timer2: timer@400c3000 {
-			compatible = "nxp,lpc3220-timer";
-			reg = <0x400c3000 0x1000>;
-			interrupts = <14>;
-			clocks = <&ccu1 CLK_CPU_TIMER2>;
-			clock-names = "timerclk";
-			resets = <&rgu 34>;
-		};
-
-		timer3: timer@400c4000 {
-			compatible = "nxp,lpc3220-timer";
-			reg = <0x400c4000 0x1000>;
-			interrupts = <15>;
-			clocks = <&ccu1 CLK_CPU_TIMER3>;
-			clock-names = "timerclk";
-			resets = <&rgu 35>;
-		};
-
-		ssp1: spi@400c5000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x400c5000 0x1000>;
-			interrupts = <23>;
-			clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>;
-			clock-names = "sspclk", "apb_pclk";
-			resets = <&rgu 51>;
-			dmas = <&dmamux 11 2 2
-				&dmamux 12 2 2
-				&dmamux  3 3 2
-				&dmamux  4 3 2
-				&dmamux  5 2 2
-				&dmamux  6 2 2
-				&dmamux 13 2 2
-				&dmamux 14 2 2>;
-			dma-names = "rx", "tx", "tx", "rx",
-				    "tx", "rx", "rx", "tx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@400e0000 {
-			compatible = "nxp,lpc1788-i2c";
-			reg = <0x400e0000 0x1000>;
-			interrupts = <19>;
-			clocks = <&ccu1 CLK_APB3_I2C1>;
-			resets = <&rgu 49>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		dac: dac@400e1000 {
-			compatible = "nxp,lpc1850-dac";
-			reg = <0x400e1000 0x1000>;
-			interrupts = <0>;
-			clocks = <&ccu1 CLK_APB3_DAC>;
-			resets = <&rgu 42>;
-			status = "disabled";
-		};
-
-		can0: can@400e2000 {
-			compatible = "bosch,c_can";
-			reg = <0x400e2000 0x1000>;
-			interrupts = <51>;
-			clocks = <&ccu1 CLK_APB3_CAN0>;
-			resets = <&rgu 55>;
-			status = "disabled";
-		};
-
-		adc0: adc@400e3000 {
-			compatible = "nxp,lpc1850-adc";
-			reg = <0x400e3000 0x1000>;
-			interrupts = <17>;
-			clocks = <&ccu1 CLK_APB3_ADC0>;
-			resets = <&rgu 40>;
-			status = "disabled";
-		};
-
-		adc1: adc@400e4000 {
-			compatible = "nxp,lpc1850-adc";
-			reg = <0x400e4000 0x1000>;
-			interrupts = <21>;
-			clocks = <&ccu1 CLK_APB3_ADC1>;
-			resets = <&rgu 41>;
-			status = "disabled";
-		};
-
-		gpio: gpio@400f4000 {
-			compatible = "nxp,lpc1850-gpio";
-			reg = <0x400f4000 0x4000>;
-			clocks = <&ccu1 CLK_CPU_GPIO>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges =	<&pinctrl LPC_GPIO(0,0)  LPC_PIN(0,0)  2>,
-					<&pinctrl LPC_GPIO(0,4)  LPC_PIN(1,0)  1>,
-					<&pinctrl LPC_GPIO(0,8)  LPC_PIN(1,1)  4>,
-					<&pinctrl LPC_GPIO(1,8)  LPC_PIN(1,5)  2>,
-					<&pinctrl LPC_GPIO(1,0)  LPC_PIN(1,7)  8>,
-					<&pinctrl LPC_GPIO(0,2)  LPC_PIN(1,15) 2>,
-					<&pinctrl LPC_GPIO(0,12) LPC_PIN(1,17) 2>,
-					<&pinctrl LPC_GPIO(0,15) LPC_PIN(1,20) 1>,
-					<&pinctrl LPC_GPIO(5,0)  LPC_PIN(2,0)  7>,
-					<&pinctrl LPC_GPIO(0,7)  LPC_PIN(2,7)  1>,
-					<&pinctrl LPC_GPIO(5,7)  LPC_PIN(2,8)  1>,
-					<&pinctrl LPC_GPIO(1,10) LPC_PIN(2,9)  1>,
-					<&pinctrl LPC_GPIO(0,14) LPC_PIN(2,10) 1>,
-					<&pinctrl LPC_GPIO(1,11) LPC_PIN(2,11) 3>,
-					<&pinctrl LPC_GPIO(5,8)  LPC_PIN(3,1)  2>,
-					<&pinctrl LPC_GPIO(1,14) LPC_PIN(3,4)  2>,
-					<&pinctrl LPC_GPIO(0,6)  LPC_PIN(3,6)  1>,
-					<&pinctrl LPC_GPIO(5,10) LPC_PIN(3,7)  2>,
-					<&pinctrl LPC_GPIO(2,0)  LPC_PIN(4,0)  7>,
-					<&pinctrl LPC_GPIO(5,12) LPC_PIN(4,8)  3>,
-					<&pinctrl LPC_GPIO(2,9)  LPC_PIN(5,0)  7>,
-					<&pinctrl LPC_GPIO(2,7)  LPC_PIN(5,7)  1>,
-					<&pinctrl LPC_GPIO(3,0)  LPC_PIN(6,1)  5>,
-					<&pinctrl LPC_GPIO(0,5)  LPC_PIN(6,6)  1>,
-					<&pinctrl LPC_GPIO(5,15) LPC_PIN(6,7)  2>,
-					<&pinctrl LPC_GPIO(3,5)  LPC_PIN(6,9)  3>,
-					<&pinctrl LPC_GPIO(2,8)  LPC_PIN(6,12) 1>,
-					<&pinctrl LPC_GPIO(3,8)  LPC_PIN(7,0)  8>,
-					<&pinctrl LPC_GPIO(4,0)  LPC_PIN(8,0)  8>,
-					<&pinctrl LPC_GPIO(4,12) LPC_PIN(9,0)  4>,
-					<&pinctrl LPC_GPIO(5,17) LPC_PIN(9,4)  2>,
-					<&pinctrl LPC_GPIO(4,11) LPC_PIN(9,6)  1>,
-					<&pinctrl LPC_GPIO(4,8)  LPC_PIN(a,1)  3>,
-					<&pinctrl LPC_GPIO(5,19) LPC_PIN(a,4)  1>,
-					<&pinctrl LPC_GPIO(5,20) LPC_PIN(b,0)  7>,
-					<&pinctrl LPC_GPIO(6,0)  LPC_PIN(c,1) 14>,
-					<&pinctrl LPC_GPIO(6,14) LPC_PIN(d,0) 17>,
-					<&pinctrl LPC_GPIO(7,0)  LPC_PIN(e,0) 16>,
-					<&pinctrl LPC_GPIO(7,16) LPC_PIN(f,1)  3>,
-					<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5)  7>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/lpc3250-ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts
deleted file mode 100644
index 63c6f17bb7c9f..0000000000000
--- a/arch/arm/boot/dts/lpc3250-ea3250.dts
+++ /dev/null
@@ -1,273 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Embedded Artists LPC3250 board
- *
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- */
-
-/dts-v1/;
-#include "lpc32xx.dtsi"
-
-/ {
-	model = "Embedded Artists LPC3250 board based on NXP LPC3250";
-	compatible = "ea,ea3250", "nxp,lpc3250";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x4000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		button {
-			label = "Interrupt Key";
-			linux,code = <103>;
-			gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
-		};
-
-		key1 {
-			label = "KEY1";
-			linux,code = <1>;
-			gpios = <&pca9532 0 0>;
-		};
-
-		key2 {
-			label = "KEY2";
-			linux,code = <2>;
-			gpios = <&pca9532 1 0>;
-		};
-
-		key3 {
-			label = "KEY3";
-			linux,code = <3>;
-			gpios = <&pca9532 2 0>;
-		};
-
-		key4 {
-			label = "KEY4";
-			linux,code = <4>;
-			gpios = <&pca9532 3 0>;
-		};
-
-		joy0 {
-			label = "Joystick Key 0";
-			linux,code = <10>;
-			gpios = <&gpio 2 0 0>; /* P2.0 */
-		};
-
-		joy1 {
-			label = "Joystick Key 1";
-			linux,code = <11>;
-			gpios = <&gpio 2 1 0>; /* P2.1 */
-		};
-
-		joy2 {
-			label = "Joystick Key 2";
-			linux,code = <12>;
-			gpios = <&gpio 2 2 0>; /* P2.2 */
-		};
-
-		joy3 {
-			label = "Joystick Key 3";
-			linux,code = <13>;
-			gpios = <&gpio 2 3 0>; /* P2.3 */
-		};
-
-		joy4 {
-			label = "Joystick Key 4";
-			linux,code = <14>;
-			gpios = <&gpio 2 4 0>; /* P2.4 */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* LEDs on OEM Board */
-
-		led1 {
-			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
-			linux,default-trigger = "timer";
-			default-state = "off";
-		};
-
-		led2 {
-			gpios = <&gpio 2 10 1>; /* P2.10, active low */
-			default-state = "off";
-		};
-
-		led3 {
-			gpios = <&gpio 2 11 1>; /* P2.11, active low */
-			default-state = "off";
-		};
-
-		led4 {
-			gpios = <&gpio 2 12 1>; /* P2.12, active low */
-			default-state = "off";
-		};
-
-		/* LEDs on Base Board */
-
-		lede1 {
-			gpios = <&pca9532 8 0>;
-			default-state = "off";
-		};
-		lede2 {
-			gpios = <&pca9532 9 0>;
-			default-state = "off";
-		};
-		lede3 {
-			gpios = <&pca9532 10 0>;
-			default-state = "off";
-		};
-		lede4 {
-			gpios = <&pca9532 11 0>;
-			default-state = "off";
-		};
-		lede5 {
-			gpios = <&pca9532 12 0>;
-			default-state = "off";
-		};
-		lede6 {
-			gpios = <&pca9532 13 0>;
-			default-state = "off";
-		};
-		lede7 {
-			gpios = <&pca9532 14 0>;
-			default-state = "off";
-		};
-		lede8 {
-			gpios = <&pca9532 15 0>;
-			default-state = "off";
-		};
-	};
-};
-
-/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
-&adc {
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-
-	uda1380: uda1380@18 {
-		compatible = "nxp,uda1380";
-		reg = <0x18>;
-		power-gpio = <&gpio 3 10 0>;
-		reset-gpio = <&gpio 3 2 0>;
-		dac-clk = "wspll";
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-
-	eeprom@57 {
-		compatible = "atmel,24c64";
-		reg = <0x57>;
-	};
-
-	pca9532: pca9532@60 {
-		compatible = "nxp,pca9532";
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0x60>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-};
-
-&i2cusb {
-	clock-frequency = <100000>;
-
-	isp1301: usb-transceiver@2d {
-		compatible = "nxp,isp1301";
-		reg = <0x2d>;
-	};
-};
-
-&mac {
-	phy-mode = "rmii";
-	use-iram;
-	status = "okay";
-};
-
-/* Here, choose exactly one from: ohci, usbd */
-&ohci /* &usbd */ {
-	transceiver = <&isp1301>;
-	status = "okay";
-};
-
-&sd {
-	wp-gpios = <&pca9532 5 0>;
-	cd-gpios = <&pca9532 4 0>;
-	cd-inverted;
-	bus-width = <4>;
-	status = "okay";
-};
-
-/* 128MB Flash via SLC NAND controller */
-&slc {
-	status = "okay";
-
-	nxp,wdr-clks = <14>;
-	nxp,wwidth = <260000000>;
-	nxp,whold = <104000000>;
-	nxp,wsetup = <200000000>;
-	nxp,rdr-clks = <14>;
-	nxp,rwidth = <34666666>;
-	nxp,rhold = <104000000>;
-	nxp,rsetup = <200000000>;
-	nand-on-flash-bbt;
-	gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		mtd0@0 {
-			label = "ea3250-boot";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-
-		mtd1@80000 {
-			label = "ea3250-uboot";
-			reg = <0x00080000 0x000c0000>;
-			read-only;
-		};
-
-		mtd2@140000 {
-			label = "ea3250-kernel";
-			reg = <0x00140000 0x00400000>;
-		};
-
-		mtd3@540000 {
-			label = "ea3250-rootfs";
-			reg = <0x00540000 0x07ac0000>;
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&uart6 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts
deleted file mode 100644
index 21a6d0bca1e8a..0000000000000
--- a/arch/arm/boot/dts/lpc3250-phy3250.dts
+++ /dev/null
@@ -1,236 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * PHYTEC phyCORE-LPC3250 board
- *
- * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- */
-
-/dts-v1/;
-#include "lpc32xx.dtsi"
-
-/ {
-	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
-	compatible = "phytec,phy3250", "nxp,lpc3250";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x4000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 { /* red */
-			gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
-			default-state = "off";
-		};
-
-		led1 { /* green */
-			gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	panel: panel {
-		compatible = "sharp,lq035q7db03";
-		power-supply = <&reg_lcd>;
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&cldc_output>;
-			};
-		};
-	};
-
-	reg_backlight: regulator-backlight {
-		compatible = "regulator-fixed";
-		regulator-name = "backlight";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio 5 4 0>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	reg_lcd: regulator-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio 5 0 0>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	reg_sd: regulator-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio 5 5 0>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&clcd {
-	max-memory-bandwidth = <18710000>;
-	status = "okay";
-
-	port {
-		cldc_output: endpoint {
-			remote-endpoint = <&panel_input>;
-			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-
-	uda1380: uda1380@18 {
-		compatible = "nxp,uda1380";
-		reg = <0x18>;
-		power-gpio = <&gpio 3 10 0>;
-		reset-gpio = <&gpio 3 2 0>;
-		dac-clk = "wspll";
-	};
-
-	pcf8563: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-};
-
-&i2cusb {
-	clock-frequency = <100000>;
-
-	isp1301: usb-transceiver@2c {
-		compatible = "nxp,isp1301";
-		reg = <0x2c>;
-	};
-};
-
-&key {
-	keypad,num-rows = <1>;
-	keypad,num-columns = <1>;
-	nxp,debounce-delay-ms = <3>;
-	nxp,scan-delay-ms = <34>;
-	linux,keymap = <0x00000002>;
-	status = "okay";
-};
-
-&mac {
-	phy-mode = "rmii";
-	use-iram;
-	status = "okay";
-};
-
-/* Here, choose exactly one from: ohci, usbd */
-&ohci /* &usbd */ {
-	transceiver = <&isp1301>;
-	status = "okay";
-};
-
-&sd {
-	wp-gpios = <&gpio 3 0 0>;
-	cd-gpios = <&gpio 3 1 0>;
-	cd-inverted;
-	bus-width = <4>;
-	vmmc-supply = <&reg_sd>;
-	status = "okay";
-};
-
-/* 64MB Flash via SLC NAND controller */
-&slc {
-	status = "okay";
-
-	nxp,wdr-clks = <14>;
-	nxp,wwidth = <40000000>;
-	nxp,whold = <100000000>;
-	nxp,wsetup = <100000000>;
-	nxp,rdr-clks = <14>;
-	nxp,rwidth = <40000000>;
-	nxp,rhold = <66666666>;
-	nxp,rsetup = <100000000>;
-	nand-on-flash-bbt;
-	gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		mtd0@0 {
-			label = "phy3250-boot";
-			reg = <0x00000000 0x00064000>;
-			read-only;
-		};
-
-		mtd1@64000 {
-			label = "phy3250-uboot";
-			reg = <0x00064000 0x00190000>;
-			read-only;
-		};
-
-		mtd2@1f4000 {
-			label = "phy3250-ubt-prms";
-			reg = <0x001f4000 0x00010000>;
-		};
-
-		mtd3@204000 {
-			label = "phy3250-kernel";
-			reg = <0x00204000 0x00400000>;
-		};
-
-		mtd4@604000 {
-			label = "phy3250-rootfs";
-			reg = <0x00604000 0x039fc000>;
-		};
-	};
-};
-
-&ssp0 {
-	num-cs = <1>;
-	cs-gpios = <&gpio 3 5 0>;
-	status = "okay";
-
-	eeprom: at25@0 {
-		compatible = "atmel,at25";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-
-		pl022,interface = <0>;
-		pl022,com-mode = <0>;
-		pl022,rx-level-trig = <1>;
-		pl022,tx-level-trig = <1>;
-		pl022,ctrl-len = <11>;
-		pl022,wait-state = <0>;
-		pl022,duplex = <0>;
-
-		at25,byte-len = <0x8000>;
-		at25,addr-mode = <2>;
-		at25,page-size = <64>;
-	};
-};
-
-&tsc {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
deleted file mode 100644
index 974410918f35b..0000000000000
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ /dev/null
@@ -1,508 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * NXP LPC32xx SoC
- *
- * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- */
-
-#include <dt-bindings/clock/lpc32xx-clock.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "nxp,lpc3220";
-	interrupt-parent = <&mic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0x0>;
-		};
-	};
-
-	clocks {
-		xtal_32k: xtal_32k {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "xtal_32k";
-		};
-
-		xtal: xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <13000000>;
-			clock-output-names = "xtal";
-		};
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x00000000 0x10000000>,
-			 <0x20000000 0x20000000 0x30000000>,
-			 <0xe0000000 0xe0000000 0x04000000>;
-
-		iram: sram@8000000 {
-			compatible = "mmio-sram";
-			reg = <0x08000000 0x20000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x08000000 0x20000>;
-		};
-
-		/*
-		 * Enable either SLC or MLC
-		 */
-		slc: flash@20020000 {
-			compatible = "nxp,lpc3220-slc";
-			reg = <0x20020000 0x1000>;
-			clocks = <&clk LPC32XX_CLK_SLC>;
-			status = "disabled";
-		};
-
-		mlc: flash@200a8000 {
-			compatible = "nxp,lpc3220-mlc";
-			reg = <0x200a8000 0x11000>;
-			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk LPC32XX_CLK_MLC>;
-			status = "disabled";
-		};
-
-		dma: dma@31000000 {
-			compatible = "arm,pl080", "arm,primecell";
-			reg = <0x31000000 0x1000>;
-			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk LPC32XX_CLK_DMA>;
-			clock-names = "apb_pclk";
-		};
-
-		usb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x0 0x31020000 0x00001000>;
-
-			/*
-			 * Enable either ohci or usbd (gadget)!
-			 */
-			ohci: ohci@0 {
-				compatible = "nxp,ohci-nxp", "usb-ohci";
-				reg = <0x0 0x300>;
-				interrupt-parent = <&sic1>;
-				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
-				status = "disabled";
-			};
-
-			usbd: usbd@0 {
-				compatible = "nxp,lpc3220-udc";
-				reg = <0x0 0x300>;
-				interrupt-parent = <&sic1>;
-				interrupts = <29 IRQ_TYPE_LEVEL_HIGH>,
-					     <30 IRQ_TYPE_LEVEL_HIGH>,
-					     <28 IRQ_TYPE_LEVEL_HIGH>,
-					     <26 IRQ_TYPE_LEVEL_LOW>;
-				clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
-				status = "disabled";
-			};
-
-			i2cusb: i2c@300 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x300 0x100>;
-				interrupt-parent = <&sic1>;
-				interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			usbclk: clock-controller@f00 {
-				compatible = "nxp,lpc3220-usb-clk";
-				reg = <0xf00 0x100>;
-				#clock-cells = <1>;
-			};
-		};
-
-		clcd: clcd@31040000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0x31040000 0x1000>;
-			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
-			clock-names = "clcdclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		mac: ethernet@31060000 {
-			compatible = "nxp,lpc-eth";
-			reg = <0x31060000 0x1000>;
-			interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk LPC32XX_CLK_MAC>;
-			status = "disabled";
-		};
-
-		emc: memory-controller@31080000 {
-			compatible = "arm,pl175", "arm,primecell";
-			reg = <0x31080000 0x1000>;
-			clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
-			clock-names = "mpmcclk", "apb_pclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xe0000000 0x01000000>,
-				 <1 0xe1000000 0x01000000>,
-				 <2 0xe2000000 0x01000000>,
-				 <3 0xe3000000 0x01000000>;
-			status = "disabled";
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x20000000 0x20000000 0x30000000>;
-
-			/*
-			 * ssp0 and spi1 are shared pins;
-			 * enable one in your board dts, as needed.
-			 */
-			ssp0: spi@20084000 {
-				compatible = "arm,pl022", "arm,primecell";
-				reg = <0x20084000 0x1000>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk LPC32XX_CLK_SSP0>;
-				clock-names = "apb_pclk";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			spi1: spi@20088000 {
-				compatible = "nxp,lpc3220-spi";
-				reg = <0x20088000 0x1000>;
-				clocks = <&clk LPC32XX_CLK_SPI1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			/*
-			 * ssp1 and spi2 are shared pins;
-			 * enable one in your board dts, as needed.
-			 */
-			ssp1: spi@2008c000 {
-				compatible = "arm,pl022", "arm,primecell";
-				reg = <0x2008c000 0x1000>;
-				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk LPC32XX_CLK_SSP1>;
-				clock-names = "apb_pclk";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			spi2: spi@20090000 {
-				compatible = "nxp,lpc3220-spi";
-				reg = <0x20090000 0x1000>;
-				clocks = <&clk LPC32XX_CLK_SPI2>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2s0: i2s@20094000 {
-				compatible = "nxp,lpc3220-i2s";
-				reg = <0x20094000 0x1000>;
-				status = "disabled";
-			};
-
-			sd: sd@20098000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				reg = <0x20098000 0x1000>;
-				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
-					     <13 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk LPC32XX_CLK_SD>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			i2s1: i2s@2009c000 {
-				compatible = "nxp,lpc3220-i2s";
-				reg = <0x2009c000 0x1000>;
-				status = "disabled";
-			};
-
-			/* UART5 first since it is the default console, ttyS0 */
-			uart5: serial@40090000 {
-				/* actually, ns16550a w/ 64 byte fifos! */
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40090000 0x1000>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-				reg-shift = <2>;
-				clocks = <&clk LPC32XX_CLK_UART5>;
-				status = "disabled";
-			};
-
-			uart3: serial@40080000 {
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40080000 0x1000>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-				reg-shift = <2>;
-				clocks = <&clk LPC32XX_CLK_UART3>;
-				status = "disabled";
-			};
-
-			uart4: serial@40088000 {
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40088000 0x1000>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-				reg-shift = <2>;
-				clocks = <&clk LPC32XX_CLK_UART4>;
-				status = "disabled";
-			};
-
-			uart6: serial@40098000 {
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40098000 0x1000>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-				reg-shift = <2>;
-				clocks = <&clk LPC32XX_CLK_UART6>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@400a0000 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x400a0000 0x100>;
-				interrupt-parent = <&sic1>;
-				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk LPC32XX_CLK_I2C1>;
-			};
-
-			i2c2: i2c@400a8000 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x400a8000 0x100>;
-				interrupt-parent = <&sic1>;
-				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk LPC32XX_CLK_I2C2>;
-			};
-
-			mpwm: mpwm@400e8000 {
-				compatible = "nxp,lpc3220-motor-pwm";
-				reg = <0x400e8000 0x78>;
-				status = "disabled";
-				#pwm-cells = <2>;
-			};
-		};
-
-		fab {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x20000000 0x20000000 0x30000000>;
-
-			/* System Control Block */
-			scb {
-				compatible = "simple-bus";
-				ranges = <0x0 0x40004000 0x00001000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				clk: clock-controller@0 {
-					compatible = "nxp,lpc3220-clk";
-					reg = <0x00 0x114>;
-					#clock-cells = <1>;
-
-					clocks = <&xtal_32k>, <&xtal>;
-					clock-names = "xtal_32k", "xtal";
-				};
-			};
-
-			mic: interrupt-controller@40008000 {
-				compatible = "nxp,lpc3220-mic";
-				reg = <0x40008000 0x4000>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			sic1: interrupt-controller@4000c000 {
-				compatible = "nxp,lpc3220-sic";
-				reg = <0x4000c000 0x4000>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-
-				interrupt-parent = <&mic>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
-					     <30 IRQ_TYPE_LEVEL_LOW>;
-				};
-
-			sic2: interrupt-controller@40010000 {
-				compatible = "nxp,lpc3220-sic";
-				reg = <0x40010000 0x4000>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-
-				interrupt-parent = <&mic>;
-				interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
-					     <31 IRQ_TYPE_LEVEL_LOW>;
-			};
-
-			uart1: serial@40014000 {
-				compatible = "nxp,lpc3220-hsuart";
-				reg = <0x40014000 0x1000>;
-				interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			uart2: serial@40018000 {
-				compatible = "nxp,lpc3220-hsuart";
-				reg = <0x40018000 0x1000>;
-				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			uart7: serial@4001c000 {
-				compatible = "nxp,lpc3220-hsuart";
-				reg = <0x4001c000 0x1000>;
-				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			rtc: rtc@40024000 {
-				compatible = "nxp,lpc3220-rtc";
-				reg = <0x40024000 0x1000>;
-				interrupt-parent = <&sic1>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk LPC32XX_CLK_RTC>;
-			};
-
-			gpio: gpio@40028000 {
-				compatible = "nxp,lpc3220-gpio";
-				reg = <0x40028000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <3>; /* bank, pin, flags */
-			};
-
-			timer4: timer@4002c000 {
-				compatible = "nxp,lpc3220-timer";
-				reg = <0x4002c000 0x1000>;
-				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-				clocks = <&clk LPC32XX_CLK_TIMER4>;
-				clock-names = "timerclk";
-				status = "disabled";
-			};
-
-			timer5: timer@40030000 {
-				compatible = "nxp,lpc3220-timer";
-				reg = <0x40030000 0x1000>;
-				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-				clocks = <&clk LPC32XX_CLK_TIMER5>;
-				clock-names = "timerclk";
-				status = "disabled";
-			};
-
-			watchdog: watchdog@4003c000 {
-				compatible = "nxp,pnx4008-wdt";
-				reg = <0x4003c000 0x1000>;
-				clocks = <&clk LPC32XX_CLK_WDOG>;
-			};
-
-			timer0: timer@40044000 {
-				compatible = "nxp,lpc3220-timer";
-				reg = <0x40044000 0x1000>;
-				clocks = <&clk LPC32XX_CLK_TIMER0>;
-				clock-names = "timerclk";
-				interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-			};
-
-			/*
-			 * TSC vs. ADC: Since those two share the same
-			 * hardware, you need to choose from one of the
-			 * following two and do 'status = "okay";' for one of
-			 * them
-			 */
-
-			adc: adc@40048000 {
-				compatible = "nxp,lpc3220-adc";
-				reg = <0x40048000 0x1000>;
-				interrupt-parent = <&sic1>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk LPC32XX_CLK_ADC>;
-				status = "disabled";
-			};
-
-			tsc: tsc@40048000 {
-				compatible = "nxp,lpc3220-tsc";
-				reg = <0x40048000 0x1000>;
-				interrupt-parent = <&sic1>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk LPC32XX_CLK_ADC>;
-				status = "disabled";
-			};
-
-			timer1: timer@4004c000 {
-				compatible = "nxp,lpc3220-timer";
-				reg = <0x4004c000 0x1000>;
-				interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-				clocks = <&clk LPC32XX_CLK_TIMER1>;
-				clock-names = "timerclk";
-			};
-
-			key: key@40050000 {
-				compatible = "nxp,lpc3220-key";
-				reg = <0x40050000 0x1000>;
-				clocks = <&clk LPC32XX_CLK_KEY>;
-				interrupt-parent = <&sic1>;
-				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			timer2: timer@40058000 {
-				compatible = "nxp,lpc3220-timer";
-				reg = <0x40058000 0x1000>;
-				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
-				clocks = <&clk LPC32XX_CLK_TIMER2>;
-				clock-names = "timerclk";
-				status = "disabled";
-			};
-
-			pwm1: pwm@4005c000 {
-				compatible = "nxp,lpc3220-pwm";
-				reg = <0x4005c000 0x4>;
-				clocks = <&clk LPC32XX_CLK_PWM1>;
-				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
-				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
-				status = "disabled";
-			};
-
-			pwm2: pwm@4005c004 {
-				compatible = "nxp,lpc3220-pwm";
-				reg = <0x4005c004 0x4>;
-				clocks = <&clk LPC32XX_CLK_PWM2>;
-				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
-				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
-				status = "disabled";
-			};
-
-			timer3: timer@40060000 {
-				compatible = "nxp,lpc3220-timer";
-				reg = <0x40060000 0x1000>;
-				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
-				clocks = <&clk LPC32XX_CLK_TIMER3>;
-				clock-names = "timerclk";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts
deleted file mode 100644
index beddaba85393e..0000000000000
--- a/arch/arm/boot/dts/lpc4337-ciaa.dts
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * CIAA NXP LPC4337 (http://www.proyecto-ciaa.com.ar)
- *
- * Copyright (C) 2015 VanguardiaSur - www.vanguardiasur.com.ar
- *
- * This code is released using a dual license strategy: BSD/GPL
- * You can choose the licence that better fits your requirements.
- *
- * Released under the terms of 3-clause BSD License
- * Released under the terms of GNU General Public License Version 2.0
- */
-/dts-v1/;
-
-#include "lpc18xx.dtsi"
-#include "lpc4357.dtsi"
-
-#include "dt-bindings/gpio/gpio.h"
-
-/ {
-	model = "CIAA NXP LPC4337";
-	compatible = "ciaa,lpc4337", "nxp,lpc4337", "nxp,lpc4350";
-
-	aliases {
-		serial0 = &uart2;
-		serial1 = &uart3;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-		stdout-path = &uart2;
-	};
-
-	memory@28000000 {
-		device_type = "memory";
-		reg = <0x28000000 0x0800000>; /* 8 MB */
-	};
-};
-
-&pinctrl {
-	enet_rmii_pins: enet-rmii-pins {
-		enet_rmii_rxd_cfg {
-			pins = "p1_15", "p0_0";
-			function = "enet";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		enet_rmii_txd_cfg {
-			pins = "p1_18", "p1_20";
-			function = "enet";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		enet_rmii_rx_dv_cfg {
-			pins = "p1_16";
-			function = "enet";
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		enet_rmii_tx_en_cfg {
-			pins = "p0_1";
-			function = "enet";
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		enet_ref_clk_cfg {
-			pins = "p1_19";
-			function = "enet";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		enet_mdio_cfg {
-			pins = "p1_17";
-			function = "enet";
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		enet_mdc_cfg {
-			pins = "p7_7";
-			function = "enet";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-	};
-
-	i2c0_pins: i2c0-pins {
-		i2c0_pins_cfg {
-			pins = "i2c0_scl", "i2c0_sda";
-			function = "i2c0";
-			input-enable;
-		};
-	};
-
-	ssp_pins: ssp-pins {
-		ssp1_cs {
-			pins = "p6_7";
-			function = "gpio";
-			bias-pull-up;
-			bias-disable;
-		};
-
-		ssp1_miso_mosi {
-			pins = "p1_3", "p1_4";
-			function = "ssp1";
-			slew-rate = <1>;
-			bias-pull-down;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		ssp1_sck {
-			pins = "pf_4";
-			function = "ssp1";
-			slew-rate = <1>;
-			bias-disable;
-		};
-	};
-
-	uart2_pins: uart2-pins {
-		uart2_rx_cfg {
-			pins = "p7_2";
-			function = "uart2";
-			bias-disable;
-			input-enable;
-		};
-
-		uart2_tx_cfg {
-			pins = "p7_1";
-			function = "uart2";
-			bias-disable;
-		};
-	};
-
-	uart3_pins: uart3-pins {
-		uart3_rx_cfg {
-			pins = "p2_4";
-			function = "uart3";
-			bias-disable;
-			input-enable;
-		};
-
-		uart3_tx_cfg {
-			pins = "p2_3";
-			function = "uart3";
-			bias-disable;
-		};
-	};
-};
-
-&enet_tx_clk {
-	clock-frequency = <50000000>;
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-
-	eeprom@50 {
-		compatible = "microchip,24c512", "atmel,24c512";
-		reg = <0x50>;
-	};
-
-	eeprom@51 {
-		compatible = "microchip,24c02", "atmel,24c02";
-		reg = <0x51>;
-	};
-
-	eeprom@54 {
-		compatible = "microchip,24c512", "atmel,24c512";
-		reg = <0x54>;
-	};
-};
-
-&mac {
-	status = "okay";
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&enet_rmii_pins>;
-};
-
-&sct_pwm {
-	status = "okay";
-};
-
-&ssp1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ssp_pins>;
-	cs-gpios = <&gpio LPC_GPIO(5,15) GPIO_ACTIVE_HIGH>;
-	num-cs = <1>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
deleted file mode 100644
index 93d0c2e99e7ce..0000000000000
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ /dev/null
@@ -1,481 +0,0 @@
-/*
- * Hitex LPC4350 Evaluation Board
- *
- * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
- *
- * This code is released using a dual license strategy: BSD/GPL
- * You can choose the licence that better fits your requirements.
- *
- * Released under the terms of 3-clause BSD License
- * Released under the terms of GNU General Public License Version 2.0
- *
- */
-/dts-v1/;
-
-#include "lpc18xx.dtsi"
-#include "lpc4350.dtsi"
-
-#include "dt-bindings/input/input.h"
-#include "dt-bindings/gpio/gpio.h"
-
-/ {
-	model = "Hitex LPC4350 Evaluation Board";
-	compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	memory@28000000 {
-		device_type = "memory";
-		reg = <0x28000000 0x800000>; /* 8 MB */
-	};
-
-	pca_buttons {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-		autorepeat;
-
-		button0 {
-			label = "joy:right";
-			linux,code = <KEY_RIGHT>;
-			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
-		};
-
-		button1 {
-			label = "joy:up";
-			linux,code = <KEY_UP>;
-			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
-		};
-
-
-		button2 {
-			label = "joy:enter";
-			linux,code = <KEY_ENTER>;
-			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
-		};
-
-		button3 {
-			label = "joy:left";
-			linux,code = <KEY_LEFT>;
-			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
-		};
-
-		button4 {
-			label = "joy:down";
-			linux,code = <KEY_DOWN>;
-			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
-		};
-
-		button5 {
-			label = "user:sw3";
-			linux,code = <KEY_F1>;
-			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
-		};
-
-		button6 {
-			label = "user:sw4";
-			linux,code = <KEY_F2>;
-			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
-		};
-
-		button7 {
-			label = "user:sw5";
-			linux,code = <KEY_F3>;
-			gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	pca_leds {
-		compatible = "gpio-leds";
-
-		led0 {
-			label = "ext:led0";
-			gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1 {
-			label = "ext:led1";
-			gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
-		};
-
-		led2 {
-			label = "ext:led2";
-			gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
-		};
-
-		led3 {
-			label = "ext:led3";
-			gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	vcc: vcc_fixed {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3io";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&pinctrl {
-	adc1_pins: adc1-pins {
-		adc1_pins_cfg {
-			pins = "pf_9";
-			function = "adc";
-			input-disable;
-			bias-disable;
-		};
-	};
-
-	emc_pins: emc-pins {
-		emc_addr0_23_cfg {
-			pins =	"p2_9",  "p2_10", "p2_11", "p2_12",
-				"p2_13", "p1_0",  "p1_1",  "p1_2",
-				"p2_8",  "p2_7",  "p2_6",  "p2_2",
-				"p2_1",  "p2_0",  "p6_8",  "p6_7",
-				"pd_16", "pd_15", "pe_0",  "pe_1",
-				"pe_2",  "pe_3",  "pe_4",  "pa_4";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_data0_15_cfg {
-			pins =	"p1_7",  "p1_8",  "p1_9",  "p1_10",
-				"p1_11", "p1_12", "p1_13", "p1_14",
-				"p5_4",  "p5_5",  "p5_6",  "p5_7",
-				"p5_0",  "p5_1",  "p5_2",  "p5_3";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_we_oe_cfg {
-			pins = "p1_6", "p1_3";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_bls0_3_cfg {
-			pins = "p1_4", "p6_6", "pd_13", "pd_10";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_cs0_cs2_cfg {
-			pins = "p1_5", "pd_12";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_sdram_dqm0_3_cfg {
-			pins = "p6_12", "p6_10", "pd_0", "pe_13";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_sdram_ras_cas_cfg {
-			pins = "p6_5", "p6_4";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_sdram_dycs0_cfg {
-			pins = "p6_9";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_sdram_cke_cfg {
-			pins = "p6_11";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_sdram_clock_cfg {
-			pins = "clk0", "clk1", "clk2", "clk3";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-	};
-
-	enet_mii_pins: enet-mii-pins {
-		enet_mii_rxd0_3_cfg {
-			pins = "p1_15", "p0_0", "p9_3", "p9_2";
-			function = "enet";
-			bias-disable;
-			input-enable;
-		};
-
-		enet_mii_txd0_3_cfg {
-			pins = "p1_18", "p1_20", "p9_4", "p9_5";
-			function = "enet";
-			bias-disable;
-		};
-
-		enet_mii_crs_col_cfg {
-			pins = "p9_0", "p9_6";
-			function = "enet";
-			bias-disable;
-			input-enable;
-		};
-
-		enet_mii_rx_clk_dv_er_cfg {
-			pins = "pc_0", "p1_16", "p9_1";
-			function = "enet";
-			bias-disable;
-			input-enable;
-		};
-
-		enet_mii_tx_clk_en_cfg {
-			pins = "p1_19", "p0_1";
-			function = "enet";
-			bias-disable;
-			input-enable;
-		};
-
-		enet_mdio_cfg {
-			pins = "p1_17";
-			function = "enet";
-			bias-disable;
-			input-enable;
-		};
-
-		enet_mdc_cfg {
-			pins = "pc_1";
-			function = "enet";
-			bias-disable;
-		};
-	};
-
-	i2c0_pins: i2c0-pins {
-		i2c0_pins_cfg {
-			pins = "i2c0_scl", "i2c0_sda";
-			function = "i2c0";
-			input-enable;
-		};
-	};
-
-	spifi_pins: spifi-pins {
-		spifi_clk_cfg {
-			pins = "p3_3";
-			function = "spifi";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		spifi_mosi_miso_sio2_3_cfg {
-			pins = "p3_7", "p3_6", "p3_5", "p3_4";
-			function = "spifi";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		spifi_cs_cfg {
-			pins = "p3_8";
-			function = "spifi";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-	};
-
-	uart0_pins: uart0-pins {
-		uart0_rx_cfg {
-			pins = "pf_11";
-			function = "uart0";
-			input-schmitt-disable;
-			bias-disable;
-			input-enable;
-		};
-
-		uart0_tx_cfg {
-			pins = "pf_10";
-			function = "uart0";
-			bias-pull-down;
-		};
-	};
-};
-
-&adc1 {
-	status = "okay";
-	vref-supply = <&vcc>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&adc1_pins>;
-};
-
-&emc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&emc_pins>;
-
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-
-		mpmc,cs = <0>;
-		mpmc,memory-width = <16>;
-		mpmc,byte-lane-low;
-		mpmc,write-enable-delay = <0>;
-		mpmc,output-enable-delay = <0>;
-		mpmc,read-access-delay = <70>;
-		mpmc,page-mode-read-delay = <70>;
-
-		flash@0,0 {
-			compatible = "sst,sst39vf320", "cfi-flash";
-			reg = <0 0 0x400000>;
-			bank-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "bootloader";
-				reg = <0x000000 0x040000>; /* 256 KiB */
-			};
-
-			partition@1 {
-				label = "kernel";
-				reg = <0x040000 0x2C0000>; /* 2.75 MiB */
-			};
-
-			partition@2 {
-				label = "rootfs";
-				reg = <0x300000 0x100000>; /* 1 MiB */
-			};
-		};
-	};
-
-	cs2 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-
-		mpmc,cs = <2>;
-		mpmc,memory-width = <16>;
-		mpmc,byte-lane-low;
-		mpmc,write-enable-delay = <0>;
-		mpmc,output-enable-delay = <30>;
-		mpmc,read-access-delay = <90>;
-		mpmc,page-mode-read-delay = <55>;
-		mpmc,write-access-delay = <55>;
-		mpmc,turn-round-delay = <55>;
-
-		ext_sram: sram@2,0 {
-			compatible = "mmio-sram";
-			reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */
-		};
-	};
-};
-
-&enet_tx_clk {
-	clock-frequency = <25000000>;
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	sensor@18 {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
-		reg = <0x18>;
-	};
-
-	eeprom@50 {
-		compatible = "nxp,24c02", "atmel,24c02";
-		reg = <0x50>;
-	};
-
-	pca_gpio: gpio@24 {
-		compatible = "nxp,pca9673";
-		reg = <0x24>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&mac {
-	status = "okay";
-	phy-mode = "mii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&enet_mii_pins>;
-};
-
-&spifi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spifi_pins>;
-
-	flash {
-		compatible = "jedec,spi-nor";
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x000000 0x040000>; /* 256 KiB */
-		};
-
-		partition@1 {
-			label = "kernel";
-			reg = <0x040000 0x2c0000>; /* 2.75 MiB */
-		};
-
-		partition@2 {
-			label = "rootfs";
-			reg = <0x300000 0x500000>; /* 5 MiB */
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
diff --git a/arch/arm/boot/dts/lpc4350.dtsi b/arch/arm/boot/dts/lpc4350.dtsi
deleted file mode 100644
index c4422f5870556..0000000000000
--- a/arch/arm/boot/dts/lpc4350.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * NXP LPC4350 and LPC4330 SoC
- *
- * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
- *
- * This code is released using a dual license strategy: BSD/GPL
- * You can choose the licence that better fits your requirements.
- *
- * Released under the terms of 3-clause BSD License
- * Released under the terms of GNU General Public License Version 2.0
- *
- */
-
-/ {
-	compatible = "nxp,lpc4350", "nxp,lpc4330";
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-m4";
-		};
-	};
-
-	soc {
-		sram0: sram@10000000 {
-			compatible = "mmio-sram";
-			reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */
-		};
-
-		sram1: sram@10080000 {
-			compatible = "mmio-sram";
-			reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */
-		};
-
-		sram2: sram@20000000 {
-			compatible = "mmio-sram";
-			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
deleted file mode 100644
index 224f80a4a31d8..0000000000000
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ /dev/null
@@ -1,623 +0,0 @@
-/*
- * Embedded Artist LPC4357 Developer's Kit
- *
- * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
- *
- * This code is released using a dual license strategy: BSD/GPL
- * You can choose the licence that better fits your requirements.
- *
- * Released under the terms of 3-clause BSD License
- * Released under the terms of GNU General Public License Version 2.0
- *
- */
-/dts-v1/;
-
-#include "lpc18xx.dtsi"
-#include "lpc4357.dtsi"
-
-#include "dt-bindings/input/input.h"
-#include "dt-bindings/gpio/gpio.h"
-
-/ {
-	model = "Embedded Artists' LPC4357 Developer's Kit";
-	compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350";
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	memory@28000000 {
-		device_type = "memory";
-		reg = <0x28000000 0x2000000>; /* 32 MB */
-	};
-
-	vcc: vcc_fixed {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	/* vmmc is controlled by sdmmc host internally */
-	vmmc: vmmc_fixed {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	gpio_joystick {
-		compatible = "gpio-keys-polled";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_joystick_pins>;
-		poll-interval = <100>;
-		autorepeat;
-
-		button0 {
-			label = "joy_enter";
-			linux,code = <KEY_ENTER>;
-			gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
-		};
-
-		button1 {
-			label = "joy_left";
-			linux,code = <KEY_LEFT>;
-			gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
-		};
-
-		button2 {
-			label = "joy_up";
-			linux,code = <KEY_UP>;
-			gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
-		};
-
-		button3 {
-			label = "joy_right";
-			linux,code = <KEY_RIGHT>;
-			gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
-		};
-
-		button4 {
-			label = "joy_down";
-			linux,code = <KEY_DOWN>;
-			gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds_mmio {
-		compatible = "gpio-leds";
-
-		led1 {
-			gpios = <&mmio_leds 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			gpios = <&mmio_leds 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		led3 {
-			gpios = <&mmio_leds 13 GPIO_ACTIVE_HIGH>;
-		};
-
-		led4 {
-			gpios = <&mmio_leds 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5 {
-			gpios = <&mmio_leds 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		led6 {
-			gpios = <&mmio_leds 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		led7 {
-			gpios = <&mmio_leds 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led8 {
-			gpios = <&mmio_leds 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		led9 {
-			gpios = <&mmio_leds 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		led10 {
-			gpios = <&mmio_leds 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		led11 {
-			gpios = <&mmio_leds 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		led12 {
-			gpios = <&mmio_leds 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		led13 {
-			gpios = <&mmio_leds 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		led14 {
-			gpios = <&mmio_leds 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		led15 {
-			gpios = <&mmio_leds 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led16 {
-			gpios = <&mmio_leds 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pinctrl {
-	emc_pins: emc-pins {
-		emc_addr0_23_cfg {
-			pins =	"p2_9",  "p2_10", "p2_11", "p2_12",
-				"p2_13", "p1_0",  "p1_1",  "p1_2",
-				"p2_8",  "p2_7",  "p2_6",  "p2_2",
-				"p2_1",  "p2_0",  "p6_8",  "p6_7",
-				"pd_16", "pd_15", "pe_0",  "pe_1",
-				"pe_2",  "pe_3",  "pe_4",  "pa_4";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_data0_31_cfg {
-			pins =	"p1_7",  "p1_8",  "p1_9",  "p1_10",
-				"p1_11", "p1_12", "p1_13", "p1_14",
-				"p5_4",  "p5_5",  "p5_6",  "p5_7",
-				"p5_0",  "p5_1",  "p5_2",  "p5_3",
-				"pd_2",  "pd_3",  "pd_4",  "pd_5",
-				"pd_6",  "pd_7",  "pd_8",  "pd_9",
-				"pe_5",  "pe_6",  "pe_7",  "pe_8",
-				"pe_9",  "pe_10", "pe_11", "pe_12";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_we_oe_cfg {
-			pins = "p1_6", "p1_3";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_bls0_3_cfg {
-			pins = "p1_4", "p6_6", "pd_13", "pd_10";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_cs0_3_cfg {
-			pins = "p1_5", "p6_3", "pd_12", "pd_11";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_sdram_dqm0_3_cfg {
-			pins = "p6_12", "p6_10", "pd_0", "pe_13";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_sdram_ras_cas_cfg {
-			pins = "p6_5", "p6_4";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_sdram_dycs0_cfg {
-			pins = "p6_9";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_sdram_cke_cfg {
-			pins = "p6_11";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		emc_sdram_clock_cfg {
-			pins = "clk0", "clk1", "clk2", "clk3";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-	};
-
-	enet_rmii_pins: enet-rmii-pins {
-		enet_rmii_rxd_cfg {
-			pins = "p1_15", "p0_0";
-			function = "enet";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		enet_rmii_txd_cfg {
-			pins = "p1_18", "p1_20";
-			function = "enet";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		enet_rmii_rx_dv_cfg {
-			pins = "p1_16";
-			function = "enet";
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		enet_rmii_tx_en_cfg {
-			pins = "p0_1";
-			function = "enet";
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		enet_ref_clk_cfg {
-			pins = "p1_19";
-			function = "enet";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		enet_mdio_cfg {
-			pins = "p1_17";
-			function = "enet";
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		enet_mdc_cfg {
-			pins = "pc_1";
-			function = "enet";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-	};
-
-	gpio_joystick_pins: gpio-joystick-pins {
-		gpio_joystick_cfg {
-			pins =	"p9_0", "p9_1", "pa_1", "pa_2", "pa_3";
-			function = "gpio";
-			input-enable;
-			bias-disable;
-		};
-	};
-
-	i2c0_pins: i2c0-pins {
-		i2c0_pins_cfg {
-			pins = "i2c0_scl", "i2c0_sda";
-			function = "i2c0";
-			input-enable;
-		};
-	};
-
-	sdmmc_pins: sdmmc-pins {
-		sdmmc_clk_cfg {
-			pins = "pc_0";
-			function = "sdmmc";
-			slew-rate = <1>;
-			bias-pull-down;
-		};
-
-		sdmmc_cmd_dat0_3_cfg {
-			pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
-			function = "sdmmc";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		sdmmc_cd_cfg {
-			pins = "pc_8";
-			function = "sdmmc";
-			bias-pull-down;
-			input-enable;
-		};
-
-		sdmmc_pow_cfg {
-			pins = "pc_9";
-			function = "sdmmc";
-			bias-pull-down;
-		};
-	};
-
-	spifi_pins: spifi-pins {
-		spifi_clk_cfg {
-			pins = "p3_3";
-			function = "spifi";
-			slew-rate = <1>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		spifi_mosi_miso_sio2_3_cfg {
-			pins = "p3_7", "p3_6", "p3_5", "p3_4";
-			function = "spifi";
-			slew-rate = <0>;
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		spifi_cs_cfg {
-			pins = "p3_8";
-			function = "spifi";
-			bias-disable;
-		};
-	};
-
-	ssp0_pins: ssp0-pins {
-		ssp0_sck_miso_mosi {
-			pins = "pf_0", "pf_2", "pf_3";
-			function = "ssp0";
-			slew-rate = <1>;
-			bias-pull-down;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		ssp0_ssel {
-			pins = "pf_1";
-			function = "ssp0";
-			bias-pull-up;
-		};
-	};
-
-	uart0_pins: uart0-pins {
-		uart0_rx_cfg {
-			pins = "pf_11";
-			function = "uart0";
-			input-schmitt-disable;
-			bias-disable;
-			input-enable;
-		};
-
-		uart0_tx_cfg {
-			pins = "pf_10";
-			function = "uart0";
-			bias-pull-down;
-		};
-	};
-
-	uart3_pins: uart3-pins {
-		uart3_rx_cfg {
-			pins = "p2_4";
-			function = "uart3";
-			input-schmitt-disable;
-			bias-disable;
-			input-enable;
-		};
-
-		uart3_tx_cfg {
-			pins = "p9_3";
-			function = "uart3";
-			bias-pull-down;
-		};
-	};
-
-	usb0_pins: usb0-pins {
-		usb0_pwr_enable {
-			pins = "p2_3";
-			function = "usb0";
-		};
-
-		usb0_pwr_fault {
-			pins = "p8_0";
-			function = "usb0";
-			bias-disable;
-			input-enable;
-		};
-	};
-};
-
-&adc0 {
-	status = "okay";
-	vref-supply = <&vcc>;
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-
-	mma7455@1d {
-		compatible = "fsl,mma7455";
-		reg = <0x1d>;
-	};
-
-	lm75@48 {
-		compatible = "nxp,lm75";
-		reg = <0x48>;
-	};
-
-	eeprom@57 {
-		compatible = "microchip,24c64", "atmel,24c64";
-		reg = <0x57>;
-	};
-};
-
-&dac {
-	status = "okay";
-	vref-supply = <&vcc>;
-};
-
-&emc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&emc_pins>;
-
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-
-		mpmc,cs = <0>;
-		mpmc,memory-width = <16>;
-		mpmc,byte-lane-low;
-		mpmc,write-enable-delay = <0>;
-		mpmc,output-enable-delay = <0>;
-		mpmc,read-access-delay = <70>;
-		mpmc,page-mode-read-delay = <70>;
-
-		flash@0,0 {
-			compatible = "sst,sst39vf320", "cfi-flash";
-			reg = <0 0 0x400000>;
-			bank-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "bootloader";
-				reg = <0x000000 0x040000>; /* 256 KiB */
-			};
-
-			partition@1 {
-				label = "kernel";
-				reg = <0x040000 0x2c0000>; /* 2.75 MiB */
-			};
-
-			partition@2 {
-				label = "rootfs";
-				reg = <0x300000 0x100000>; /* 1 MiB */
-			};
-		};
-	};
-
-	cs2 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-
-		mpmc,cs = <2>;
-		mpmc,memory-width = <16>;
-
-		mmio_leds: gpio@2,0 {
-			compatible = "ti,7416374";
-			reg = <2 0 0x2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-	};
-};
-
-&enet_tx_clk {
-	clock-frequency = <50000000>;
-};
-
-&mac {
-	status = "okay";
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&enet_rmii_pins>;
-};
-
-&mmcsd {
-	status = "okay";
-	bus-width = <4>;
-	vmmc-supply = <&vmmc>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_pins>;
-};
-
-&spifi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spifi_pins>;
-
-	flash {
-		compatible = "jedec,spi-nor";
-		spi-cpol;
-		spi-cpha;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "data";
-			reg = <0 0x200000>;
-		};
-	};
-};
-
-&ssp0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ssp0_pins>;
-	num-cs = <1>;
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&usb0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins>;
-};
diff --git a/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts
deleted file mode 100644
index 1f84654df50c3..0000000000000
--- a/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts
+++ /dev/null
@@ -1,619 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * MYIR Tech MYD-LPC4357 Development Board with 800x480 7" TFT panel
- *
- * Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
- */
-
-/dts-v1/;
-
-#include "lpc18xx.dtsi"
-#include "lpc4357.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "MYIR Tech LPC4357 Development Board";
-	compatible = "myir,myd-lpc4357", "nxp,lpc4357";
-
-	chosen {
-		stdout-path = "serial3:115200n8";
-	};
-
-	memory@28000000 {
-		device_type = "memory";
-		reg = <0x28000000 0x2000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		led1 {
-			gpios = <&gpio LPC_GPIO(6,15) GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led2 {
-			gpios = <&gpio LPC_GPIO(6,16) GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			gpios = <&gpio LPC_GPIO(6,17) GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led4 {
-			gpios = <&gpio LPC_GPIO(6,10) GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led5 {
-			gpios = <&gpio LPC_GPIO(7,14) GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led6 {
-			gpios = <&gpio LPC_GPIO(6,14) GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	panel: panel {
-		compatible = "innolux,at070tn92";
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&lcdc_output>;
-			};
-		};
-	};
-
-	vcc: vcc_fixed {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vmmc: vmmc_fixed {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&pinctrl {
-	can0_pins: can0-pins {
-		can_rd_cfg {
-			pins = "p3_1";
-			function = "can0";
-			input-enable;
-		};
-
-		can_td_cfg {
-			pins = "p3_2";
-			function = "can0";
-		};
-	};
-
-	can1_pins: can1-pins {
-		can_rd_cfg {
-			pins = "pe_1";
-			function = "can1";
-			input-enable;
-		};
-
-		can_td_cfg {
-			pins = "pe_0";
-			function = "can1";
-		};
-	};
-
-	emc_pins: emc-pins {
-		emc_addr0_22_cfg {
-			pins = "p2_9",  "p2_10", "p2_11", "p2_12",
-			       "p2_13", "p1_0",  "p1_1",  "p1_2",
-			       "p2_8",  "p2_7",  "p2_6",  "p2_2",
-			       "p2_1",  "p2_0",  "p6_8",  "p6_7",
-			       "pd_16", "pd_15", "pe_0",  "pe_1",
-			       "pe_2",  "pe_3",  "pe_4";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		emc_data0_15_cfg {
-			pins = "p1_7",  "p1_8",  "p1_9",  "p1_10",
-			       "p1_11", "p1_12", "p1_13", "p1_14",
-			       "p5_4",  "p5_5",  "p5_6",  "p5_7",
-			       "p5_0",  "p5_1",  "p5_2",  "p5_3";
-			function = "emc";
-			input-enable;
-			input-schmitt-disable;
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		emc_we_oe_cfg {
-			pins = "p1_6", "p1_3";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		emc_cs0_cfg {
-			pins = "p1_5";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		emc_sdram_dqm0_1_cfg {
-			pins = "p6_12", "p6_10";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		emc_sdram_ras_cas_cfg {
-			pins = "p6_5", "p6_4";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		emc_sdram_dycs0_cfg {
-			pins = "p6_9";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		emc_sdram_cke_cfg {
-			pins = "p6_11";
-			function = "emc";
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		emc_sdram_clock_cfg {
-			pins = "clk0";
-			function = "emc";
-			input-enable;
-			input-schmitt-disable;
-			slew-rate = <1>;
-			bias-disable;
-		};
-	};
-
-	enet_rmii_pins: enet-rmii-pins {
-		enet_rmii_rxd_cfg {
-			pins = "p1_15", "p0_0";
-			function = "enet";
-			input-enable;
-			input-schmitt-disable;
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		enet_rmii_txd_cfg {
-			pins = "p1_18", "p1_20";
-			function = "enet";
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		enet_rmii_rx_dv_cfg {
-			pins = "p1_16";
-			function = "enet";
-			input-enable;
-			input-schmitt-disable;
-			bias-disable;
-		};
-
-		enet_mdio_cfg {
-			pins = "p1_17";
-			function = "enet";
-			input-enable;
-			input-schmitt-disable;
-			bias-disable;
-		};
-
-		enet_mdc_cfg {
-			pins = "pc_1";
-			function = "enet";
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		enet_rmii_tx_en_cfg {
-			pins = "p0_1";
-			function = "enet";
-			bias-disable;
-		};
-
-		enet_ref_clk_cfg {
-			pins = "p1_19";
-			function = "enet";
-			slew-rate = <1>;
-			input-enable;
-			input-schmitt-disable;
-			bias-disable;
-		};
-	};
-
-	i2c0_pins: i2c0-pins {
-		i2c0_pins_cfg {
-			pins = "i2c0_scl", "i2c0_sda";
-			function = "i2c0";
-			input-enable;
-		};
-	};
-
-	i2c1_pins: i2c1-pins {
-		i2c1_pins_cfg {
-			pins = "pe_15", "pe_13";
-			function = "i2c1";
-			input-enable;
-		};
-	};
-
-	lcd_pins: lcd-pins {
-		lcd_vd0_23_cfg {
-			pins = "p4_1", "p4_4", "p4_3",  "p4_2",
-			       "p8_7", "p8_6", "p8_5",  "p8_4",
-			       "p7_5", "p4_8", "p4_10", "p4_9",
-			       "p8_3", "pb_6", "pb_5",  "pb_4",
-			       "p7_4", "p7_3", "p7_2",  "p7_1",
-			       "pb_3", "pb_2", "pb_1",  "pb_0";
-			function = "lcd";
-		};
-
-		lcd_vsync_en_dclk_lp_pwr_cfg {
-			pins = "p4_5", "p4_6", "p4_7", "p7_6", "p7_7";
-			function = "lcd";
-		};
-	};
-
-	led_pins: led-pins {
-		led_1_6_cfg {
-			pins = "pd_1", "pd_2", "pd_3", "pc_11", "pe_14", "pd_0";
-			function = "gpio";
-			bias-pull-down;
-		};
-	};
-
-	sdmmc_pins: sdmmc-pins {
-		sdmmc_clk_cfg {
-			pins = "pc_0";
-			function = "sdmmc";
-			slew-rate = <1>;
-			bias-pull-down;
-		};
-
-		sdmmc_cmd_dat0_3_cfg {
-			pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
-			function = "sdmmc";
-			input-enable;
-			input-schmitt-disable;
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		sdmmc_cd_cfg {
-			pins = "pc_8";
-			function = "sdmmc";
-			input-enable;
-			bias-pull-down;
-		};
-	};
-
-	spifi_pins: spifi-pins {
-		spifi_sck_cfg {
-			pins = "p3_3";
-			function = "spifi";
-			input-enable;
-			input-schmitt-disable;
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		spifi_mosi_miso_sio2_sio3_cfg {
-			pins = "p3_7", "p3_6", "p3_5", "p3_4";
-			function = "spifi";
-			input-enable;
-			input-schmitt-disable;
-			slew-rate = <1>;
-			bias-disable;
-		};
-
-		spifi_cs_cfg {
-			pins = "p3_8";
-			function = "spifi";
-			bias-disable;
-		};
-	};
-
-	ssp1_pins: ssp1-pins {
-		ssp1_sck_cfg {
-			pins = "pf_4";
-			function = "ssp1";
-			slew-rate = <1>;
-			bias-pull-down;
-		};
-
-		ssp1_miso_cfg {
-			pins = "pf_6";
-			function = "ssp1";
-			input-enable;
-			input-schmitt-disable;
-			slew-rate = <1>;
-			bias-pull-down;
-		};
-
-		ssp1_mosi_cfg {
-			pins = "pf_7";
-			function = "ssp1";
-			slew-rate = <1>;
-			bias-pull-down;
-		};
-
-		ssp1_ssel_cfg {
-			pins = "pf_5";
-			function = "gpio";
-			bias-disable;
-		};
-	};
-
-	uart0_pins: uart0-pins {
-		uart0_rxd_cfg {
-			pins = "pf_11";
-			function = "uart0";
-			input-enable;
-			input-schmitt-disable;
-			bias-disable;
-		};
-
-		uart0_clk_dir_txd_cfg {
-			pins = "pf_8", "pf_9", "pf_10";
-			function = "uart0";
-			bias-pull-down;
-		};
-	};
-
-	uart1_pins: uart1-pins {
-		uart1_rxd_cfg {
-			pins = "pc_14";
-			function = "uart1";
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		uart1_dtr_txd_cfg {
-			pins = "pc_12", "pc_13";
-			function = "uart1";
-			bias-pull-down;
-		};
-	};
-
-	uart2_pins: uart2-pins {
-		uart2_rxd_cfg {
-			pins = "pa_2";
-			function = "uart2";
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		uart2_txd_cfg {
-			pins = "pa_1";
-			function = "uart2";
-			bias-pull-down;
-		};
-	};
-
-	uart3_pins: uart3-pins {
-		uart3_rx_cfg {
-			pins = "p2_4";
-			function = "uart3";
-			bias-disable;
-			input-enable;
-			input-schmitt-disable;
-		};
-
-		uart3_tx_cfg {
-			pins = "p2_3";
-			function = "uart3";
-			bias-pull-down;
-		};
-	};
-
-	usb0_pins: usb0-pins {
-		usb0_pwr_enable_cfg {
-			pins = "p6_3";
-			function = "usb0";
-		};
-
-		usb0_pwr_fault_cfg {
-			pins = "p8_0";
-			function = "usb0";
-			bias-disable;
-			input-enable;
-		};
-	};
-};
-
-&adc1 {
-	status = "okay";
-	vref-supply = <&vcc>;
-};
-
-&can0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&can0_pins>;
-};
-
-/* Pin conflict with EMC, muxed by JP5 and JP6 */
-&can1 {
-	status = "disabled";
-	pinctrl-names = "default";
-	pinctrl-0 = <&can1_pins>;
-};
-
-&emc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&emc_pins>;
-
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-
-		mpmc,cs = <0>;
-		mpmc,memory-width = <16>;
-		mpmc,byte-lane-low;
-		mpmc,write-enable-delay = <0>;
-		mpmc,output-enable-delay = <0>;
-		mpmc,read-access-delay = <70>;
-		mpmc,page-mode-read-delay = <70>;
-
-		/* SST/Microchip SST39VF1601 */
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x400000>;
-			bank-width = <2>;
-		};
-	};
-};
-
-&enet_tx_clk {
-	clock-frequency = <50000000>;
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-
-	sensor@49 {
-		compatible = "lm75";
-		reg = <0x49>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c512";
-		reg = <0x50>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_pins>;
-
-	max-memory-bandwidth = <92240000>;
-
-	port {
-		lcdc_output: endpoint {
-			remote-endpoint = <&panel_input>;
-			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-		};
-	};
-};
-
-&mac {
-	status = "okay";
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&enet_rmii_pins>;
-	phy-handle = <&phy1>;
-
-	mdio0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,dwmac-mdio";
-
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-	};
-};
-
-&mmcsd {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_pins>;
-	bus-width = <4>;
-	vmmc-supply = <&vmmc>;
-};
-
-/* Pin conflict with SSP0, the latter is routed to J17 pin header */
-&spifi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spifi_pins>;
-
-	/* Atmel AT25DF321A */
-	flash {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <51000000>;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&ssp1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ssp1_pins>;
-	num-cs = <1>;
-	cs-gpios = <&gpio LPC_GPIO(7,19) GPIO_ACTIVE_LOW>;
-};
-
-/* Routed to J17 pin header */
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-/* RS485 */
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-/* Routed to J17 pin header */
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&usb0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins>;
-};
diff --git a/arch/arm/boot/dts/lpc4357.dtsi b/arch/arm/boot/dts/lpc4357.dtsi
deleted file mode 100644
index 72f12db8d53a7..0000000000000
--- a/arch/arm/boot/dts/lpc4357.dtsi
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * NXP LPC435x, LPC433x, LPC4327, LPC4325, LPC4317 and LPC4315 SoC
- *
- * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
- *
- * This code is released using a dual license strategy: BSD/GPL
- * You can choose the licence that better fits your requirements.
- *
- * Released under the terms of 3-clause BSD License
- * Released under the terms of GNU General Public License Version 2.0
- *
- */
-
-/ {
-	compatible = "nxp,lpc4357";
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-m4";
-		};
-	};
-
-	soc {
-		sram0: sram@10000000 {
-			compatible = "mmio-sram";
-			reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */
-		};
-
-		sram1: sram@10080000 {
-			compatible = "mmio-sram";
-			reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */
-		};
-
-		sram2: sram@20000000 {
-			compatible = "mmio-sram";
-			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
-		};
-	};
-};
-
-&eeprom {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/ls1021a-iot.dts b/arch/arm/boot/dts/ls1021a-iot.dts
deleted file mode 100644
index ce8e26d7791f4..0000000000000
--- a/arch/arm/boot/dts/ls1021a-iot.dts
+++ /dev/null
@@ -1,227 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2021-2022 NXP
- *
- */
-
-/dts-v1/;
-#include "ls1021a.dtsi"
-
-/ {
-	model = "LS1021A-IOT Board";
-	compatible = "fsl,ls1021a-iot", "fsl,ls1021a";
-
-	sys_mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	reg_3p3v: regulator-3V3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_2p5v: regulator-2V5 {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker Ext",
-			"Line", "Line In Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"Microphone Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Speaker Ext", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-			frame-master;
-			bitclock-master;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-			frame-master;
-			bitclock-master;
-		};
-	};
-};
-
-&can0{
-	status = "disabled";
-};
-
-&can1{
-	status = "disabled";
-};
-
-&can2{
-	status = "disabled";
-};
-
-&can3{
-	status = "okay";
-};
-
-&dcu {
-	display = <&display>;
-	status = "okay";
-
-	display: display@0 {
-		bits-per-pixel = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-
-			timing0: mode0 {
-				clock-frequency = <25000000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <80>;
-				hfront-porch = <80>;
-				vback-porch = <16>;
-				vfront-porch = <16>;
-				hsync-len = <12>;
-				vsync-len = <2>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-};
-
-&enet0 {
-	tbi-handle = <&tbi1>;
-	phy-handle = <&phy1>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet1 {
-	tbi-handle = <&tbi1>;
-	phy-handle = <&phy3>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet2 {
-	fixed-link = <0 1 1000 0 0>;
-	phy-connection-type = "rgmii-id";
-	status = "okay";
-};
-
-&esdhc{
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	pca9555: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sgtl5000: audio-codec@2a {
-		#sound-dai-cells = <0x0>;
-		compatible = "fsl,sgtl5000";
-		reg = <0x2a>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_2p5v>;
-		clocks = <&sys_mclk>;
-	};
-
-	max1239: adc@35 {
-		compatible = "maxim,max1239";
-		reg = <0x35>;
-		#io-channel-cells = <1>;
-	};
-
-	ina2201: core-monitor@44 {
-		compatible = "ti,ina220";
-		reg = <0x44>;
-		shunt-resistor = <1000>;
-	};
-
-	ina2202: current-monitor@45 {
-		compatible = "ti,ina220";
-		reg = <0x45>;
-		shunt-resistor = <1000>;
-	};
-
-	lm75b: thermal-monitor@48 {
-		compatible = "national,lm75b";
-		reg = <0x48>;
-	};
-};
-
-&lpuart0 {
-	status = "okay";
-};
-
-&mdio0 {
-	phy0: ethernet-phy@0 {
-		reg = <0x0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <0x1>;
-	};
-
-	phy2: ethernet-phy@2 {
-		reg = <0x2>;
-	};
-
-	phy3: ethernet-phy@3 {
-		reg = <0x3>;
-	};
-
-	tbi1: tbi-phy@1f {
-		reg = <0x1f>;
-		device_type = "tbi-phy";
-	};
-};
-
-&qspi {
-	num-cs = <2>;
-	status = "okay";
-
-	s25fl128s: flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&sai2 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
deleted file mode 100644
index d2cae8c7d7a61..0000000000000
--- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 Moxa Inc. - https://www.moxa.com/
- *
- * Author: Harry YJ Jhou (周亞諄) <harryyj.jhou@moxa.com>
- *         Jimmy Chen (陳永達)    <jimmy.chen@moxa.com>
- *         SZ Lin (林上智)        <sz.lin@moxa.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "ls1021a.dtsi"
-
-/ {
-	model = "Moxa UC-8410A";
-	compatible = "fsl,ls1021a-moxa-uc-8410a", "fsl,ls1021a";
-
-	aliases {
-		enet0_rgmii_phy = &rgmii_phy0;
-		enet1_rgmii_phy = &rgmii_phy1;
-		enet2_rgmii_phy = &rgmii_phy2;
-	};
-
-	sys_mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		cel-pwr {
-			label = "UC8410A:CEL-PWR";
-			gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		cel-reset {
-			label = "UC8410A:CEL-RESET";
-			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		str-led {
-			label = "UC8410A:RED:PROG";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-		};
-
-		sw-ready {
-			label = "UC8410A:GREEN:SWRDY";
-			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		beeper {
-			label = "UC8410A:BEEP";
-			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		prog-led0 {
-			label = "UC8410A:GREEN:PROG2";
-			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		prog-led1 {
-			label = "UC8410A:GREEN:PROG1";
-			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		prog-led2 {
-			label = "UC8410A:GREEN:PROG0";
-			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		wifi-signal0 {
-			label = "UC8410A:GREEN:CEL2";
-			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		wifi-signal1 {
-			label = "UC8410A:GREEN:CEL1";
-			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		wifi-signal2 {
-			label = "UC8410A:GREEN:CEL0";
-			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		cpu-diag-red {
-			label = "UC8410A:RED:DIA";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		cpu-diag-green {
-			label = "UC8410A:GREEN:DIA";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		cpu-diag-yellow {
-			label = "UC8410A:YELLOW:DIA";
-			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pushbtn-key {
-			label = "push button key";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			default-state = "on";
-		};
-	};
-};
-
-&enet0 {
-	phy-handle = <&rgmii_phy0>;
-	phy-connection-type = "rgmii-id";
-	status = "okay";
-};
-
-&enet1 {
-	phy-handle = <&rgmii_phy1>;
-	phy-connection-type = "rgmii-id";
-	status = "okay";
-};
-
-&enet2 {
-	phy-handle = <&rgmii_phy2>;
-	phy-connection-type = "rgmii-id";
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	tpm@20 {
-		compatible = "infineon,slb9635tt";
-		reg = <0x20>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1374";
-		reg = <0x68>;
-	};
-};
-
-&lpuart0 {
-	status = "okay";
-};
-
-&mdio0 {
-	rgmii_phy0: ethernet-phy@0 {
-		compatible = "marvell,88e1118";
-		reg = <0x0>;
-		marvell,reg-init =
-			<3 0x11 0 0x4415>, /* Reg 3,17 */
-			<3 0x10 0 0x77>; /* Reg 3,16 */
-	};
-
-	rgmii_phy1: ethernet-phy@1 {
-		compatible = "marvell,88e1118";
-		reg = <0x1>;
-		marvell,reg-init =
-			<3 0x11 0 0x4415>, /* Reg 3,17 */
-			<3 0x10 0 0x77>; /* Reg 3,16 */
-	};
-
-	rgmii_phy2: ethernet-phy@2 {
-		compatible = "marvell,88e1118";
-		reg = <0x2>;
-		marvell,reg-init =
-			<3 0x11 0 0x4415>, /* Reg 3,17 */
-			<3 0x10 0 0x77>; /* Reg 3,16 */
-	};
-};
-
-&qspi {
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "spansion,s25fl064l", "spansion,s25fl164k";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
-		reg = <0>;
-
-		partitions@0 {
-			label = "U-Boot";
-			reg = <0x0 0x180000>;
-		};
-
-		partitions@180000 {
-			label = "U-Boot Env";
-			reg = <0x180000 0x680000>;
-		};
-	};
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
deleted file mode 100644
index f1acb97aee69b..0000000000000
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ /dev/null
@@ -1,326 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2013-2014 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
- */
-
-/dts-v1/;
-#include "ls1021a.dtsi"
-
-/ {
-	model = "LS1021A QDS Board";
-	compatible = "fsl,ls1021a-qds", "fsl,ls1021a";
-
-	aliases {
-		enet0_rgmii_phy = &rgmii_phy1;
-		enet1_rgmii_phy = &rgmii_phy2;
-		enet2_rgmii_phy = &rgmii_phy3;
-		enet0_sgmii_phy = &sgmii_phy1c;
-		enet1_sgmii_phy = &sgmii_phy1d;
-	};
-
-	sys_mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	reg_3p3v: regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker Ext",
-			"Line", "Line In Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"Microphone Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Speaker Ext", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-			frame-master;
-			bitclock-master;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			frame-master;
-			bitclock-master;
-		};
-	};
-};
-
-&dspi0 {
-	bus-num = <0>;
-	status = "okay";
-
-	dspiflash: at45db021d@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
-		spi-max-frequency = <16000000>;
-		spi-cpol;
-		spi-cpha;
-		reg = <0>;
-	};
-};
-
-&enet0 {
-	tbi-handle = <&tbi0>;
-	phy-handle = <&sgmii_phy1c>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet1 {
-	tbi-handle = <&tbi0>;
-	phy-handle = <&sgmii_phy1d>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet2 {
-	phy-handle = <&rgmii_phy3>;
-	phy-connection-type = "rgmii-id";
-	status = "okay";
-};
-
-&esdhc {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	pca9547: mux@77 {
-		compatible = "nxp,pca9547";
-		reg = <0x77>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-
-			ds3232: rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-
-			ina220@40 {
-				compatible = "ti,ina220";
-				reg = <0x40>;
-				shunt-resistor = <1000>;
-			};
-
-			ina220@41 {
-				compatible = "ti,ina220";
-				reg = <0x41>;
-				shunt-resistor = <1000>;
-			};
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3>;
-
-			eeprom@56 {
-				compatible = "atmel,24c512";
-				reg = <0x56>;
-			};
-
-			eeprom@57 {
-				compatible = "atmel,24c512";
-				reg = <0x57>;
-			};
-
-			adt7461a@4c {
-				compatible = "adi,adt7461a";
-				reg = <0x4c>;
-			};
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4>;
-
-			codec: sgtl5000@2a {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,sgtl5000";
-				reg = <0x2a>;
-				VDDA-supply = <&reg_3p3v>;
-				VDDIO-supply = <&reg_3p3v>;
-				clocks = <&sys_mclk>;
-			};
-		};
-	};
-};
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	/* NOR, NAND Flashes and FPGA on board */
-	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>,
-		 <0x2 0x0 0x0 0x7e800000 0x00010000>,
-		 <0x3 0x0 0x0 0x7fb00000 0x00000100>;
-	status = "okay";
-
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x8000000>;
-		big-endian;
-		bank-width = <2>;
-		device-width = <1>;
-	};
-
-	nand@2,0 {
-		compatible = "fsl,ifc-nand";
-		reg = <0x2 0x0 0x10000>;
-	};
-
-	fpga: board-control@3,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-mfd";
-		reg = <0x3 0x0 0x0000100>;
-		bank-width = <1>;
-		device-width = <1>;
-		ranges = <0 3 0 0x100>;
-
-		mdio-mux-emi1 {
-			compatible = "mdio-mux-mmioreg";
-			mdio-parent-bus = <&mdio0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x54 1>; /* BRDCFG4 */
-			mux-mask = <0xe0>; /* EMI1[2:0] */
-
-			/* Onboard PHYs */
-			ls1021amdio0: mdio@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rgmii_phy1: ethernet-phy@1 {
-					reg = <0x1>;
-				};
-			};
-
-			ls1021amdio1: mdio@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rgmii_phy2: ethernet-phy@2 {
-					reg = <0x2>;
-				};
-			};
-
-			ls1021amdio2: mdio@40 {
-				reg = <0x40>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rgmii_phy3: ethernet-phy@3 {
-					reg = <0x3>;
-				};
-			};
-
-			ls1021amdio3: mdio@60 {
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				sgmii_phy1c: ethernet-phy@1c {
-					reg = <0x1c>;
-				};
-			};
-
-			ls1021amdio4: mdio@80 {
-				reg = <0x80>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				sgmii_phy1d: ethernet-phy@1d {
-					reg = <0x1d>;
-				};
-			};
-		};
-	};
-};
-
-&lpuart0 {
-	status = "okay";
-};
-
-&mdio0 {
-	tbi0: tbi-phy@8 {
-		reg = <0x8>;
-		device_type = "tbi-phy";
-	};
-};
-
-&qspi {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
-	};
-};
-
-&sai2 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&can0 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "disabled";
-};
-
-&can3 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
deleted file mode 100644
index 1ea32fff41201..0000000000000
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ /dev/null
@@ -1,295 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright 2016-2018 NXP Semiconductors
- * Copyright 2019 Vladimir Oltean <olteanv@gmail.com>
- */
-
-/dts-v1/;
-#include "ls1021a.dtsi"
-
-/ {
-	model = "NXP LS1021A-TSN Board";
-	compatible = "fsl,ls1021a-tsn", "fsl,ls1021a";
-
-	sys_mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	reg_vdda_codec: regulator-3V3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_vddio_codec: regulator-2V5 {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-};
-
-&dspi0 {
-	bus-num = <0>;
-	status = "okay";
-
-	/* ADG704BRMZ 1:4 SPI mux/demux */
-	sja1105: ethernet-switch@1 {
-		reg = <0x1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nxp,sja1105t";
-		/* 12 MHz */
-		spi-max-frequency = <12000000>;
-		/* Sample data on trailing clock edge */
-		spi-cpha;
-		/* SPI controller settings for SJA1105 timing requirements */
-		fsl,spi-cs-sck-delay = <1000>;
-		fsl,spi-sck-cs-delay = <1000>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				/* ETH5 written on chassis */
-				label = "swp5";
-				phy-handle = <&rgmii_phy6>;
-				phy-mode = "rgmii-id";
-				reg = <0>;
-			};
-
-			port@1 {
-				/* ETH2 written on chassis */
-				label = "swp2";
-				phy-handle = <&rgmii_phy3>;
-				phy-mode = "rgmii-id";
-				reg = <1>;
-			};
-
-			port@2 {
-				/* ETH3 written on chassis */
-				label = "swp3";
-				phy-handle = <&rgmii_phy4>;
-				phy-mode = "rgmii-id";
-				reg = <2>;
-			};
-
-			port@3 {
-				/* ETH4 written on chassis */
-				label = "swp4";
-				phy-handle = <&rgmii_phy5>;
-				phy-mode = "rgmii-id";
-				reg = <3>;
-			};
-
-			port@4 {
-				/* Internal port connected to eth2 */
-				ethernet = <&enet2>;
-				phy-mode = "rgmii";
-				rx-internal-delay-ps = <0>;
-				tx-internal-delay-ps = <0>;
-				reg = <4>;
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&enet0 {
-	tbi-handle = <&tbi0>;
-	phy-handle = <&sgmii_phy2>;
-	phy-mode = "sgmii";
-	status = "okay";
-};
-
-&enet1 {
-	tbi-handle = <&tbi1>;
-	phy-handle = <&sgmii_phy1>;
-	phy-mode = "sgmii";
-	status = "okay";
-};
-
-/* RGMII delays added via PCB traces */
-&enet2 {
-	phy-mode = "rgmii";
-	status = "okay";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&esdhc {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	/* 3 axis accelerometer */
-	accelerometer@1e {
-		compatible = "fsl,fxls8471";
-		reg = <0x1e>;
-	};
-
-	/* Audio codec (SAI2) */
-	audio-codec@2a {
-		compatible = "fsl,sgtl5000";
-		VDDIO-supply = <&reg_vddio_codec>;
-		VDDA-supply = <&reg_vdda_codec>;
-		#sound-dai-cells = <0>;
-		clocks = <&sys_mclk>;
-		reg = <0x2a>;
-	};
-
-	/* Current sensing circuit for 1V VDDCORE PMIC rail */
-	current-sensor@44 {
-		compatible = "ti,ina220";
-		shunt-resistor = <1000>;
-		reg = <0x44>;
-	};
-
-	/* Current sensing circuit for 12V VCC rail */
-	current-sensor@45 {
-		compatible = "ti,ina220";
-		shunt-resistor = <1000>;
-		reg = <0x45>;
-	};
-
-	/* Thermal monitor - case */
-	temperature-sensor@48 {
-		compatible = "national,lm75";
-		reg = <0x48>;
-	};
-
-	/* Thermal monitor - chip */
-	temperature-sensor@4c {
-		compatible = "ti,tmp451";
-		reg = <0x4c>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c32";
-		reg = <0x51>;
-	};
-
-	/* Unsupported devices:
-	 * - FXAS21002C Gyroscope at 0x20
-	 * - TI ADS7924 4-channel ADC at 0x49
-	 */
-};
-
-&ifc {
-	status = "disabled";
-};
-
-&lpuart0 {
-	status = "okay";
-};
-
-&lpuart3 {
-	status = "okay";
-};
-
-&mdio0 {
-	/* AR8031 */
-	sgmii_phy1: ethernet-phy@1 {
-		reg = <0x1>;
-		/* SGMII1_PHY_INT_B: connected to IRQ2, active low */
-		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	/* AR8031 */
-	sgmii_phy2: ethernet-phy@2 {
-		reg = <0x2>;
-		/* SGMII2_PHY_INT_B: connected to IRQ2, active low */
-		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	/* BCM5464 quad PHY */
-	rgmii_phy3: ethernet-phy@3 {
-		reg = <0x3>;
-	};
-
-	rgmii_phy4: ethernet-phy@4 {
-		reg = <0x4>;
-	};
-
-	rgmii_phy5: ethernet-phy@5 {
-		reg = <0x5>;
-	};
-
-	rgmii_phy6: ethernet-phy@6 {
-		reg = <0x6>;
-	};
-
-	/* SGMII PCS for enet0 */
-	tbi0: tbi-phy@1f {
-		reg = <0x1f>;
-		device_type = "tbi-phy";
-	};
-};
-
-&mdio1 {
-	/* SGMII PCS for enet1 */
-	tbi1: tbi-phy@1f {
-		reg = <0x1f>;
-		device_type = "tbi-phy";
-	};
-};
-
-&qspi {
-	status = "okay";
-
-	flash@0 {
-		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "RCW";
-				reg = <0x0 0x40000>;
-			};
-
-			partition@40000 {
-				label = "U-Boot";
-				reg = <0x40000 0x300000>;
-			};
-
-			partition@340000 {
-				label = "U-Boot Env";
-				reg = <0x340000 0x100000>;
-			};
-		};
-	};
-};
-
-&sai2 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
deleted file mode 100644
index f5c03871b2050..0000000000000
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ /dev/null
@@ -1,240 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2013-2014 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
- */
-
-/dts-v1/;
-#include "ls1021a.dtsi"
-
-/ {
-	model = "LS1021A TWR Board";
-	compatible = "fsl,ls1021a-twr", "fsl,ls1021a";
-
-	aliases {
-		enet2_rgmii_phy = &rgmii_phy1;
-		enet0_sgmii_phy = &sgmii_phy2;
-		enet1_sgmii_phy = &sgmii_phy0;
-	};
-
-	sys_mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	reg_3p3v: regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker Ext",
-			"Line", "Line In Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"Microphone Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Speaker Ext", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai1>;
-			frame-master;
-			bitclock-master;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			frame-master;
-			bitclock-master;
-		};
-	};
-
-	panel: panel {
-		compatible = "nec,nl4827hc19-05b";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dcu_out>;
-			};
-		};
-	};
-};
-
-&dcu {
-	status = "okay";
-
-	port {
-		dcu_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&dspi1 {
-	bus-num = <0>;
-	status = "okay";
-
-	dspiflash: s25fl064k@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl064k";
-		spi-max-frequency = <16000000>;
-		spi-cpol;
-		spi-cpha;
-		reg = <0>;
-	};
-};
-
-&enet0 {
-	tbi-handle = <&tbi0>;
-	phy-handle = <&sgmii_phy2>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet1 {
-	tbi-handle = <&tbi1>;
-	phy-handle = <&sgmii_phy0>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet2 {
-	phy-handle = <&rgmii_phy1>;
-	phy-connection-type = "rgmii-id";
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	ina220@40 {
-		compatible = "ti,ina220";
-		reg = <0x40>;
-		shunt-resistor = <1000>;
-	};
-
-	ina220@41 {
-		compatible = "ti,ina220";
-		reg = <0x41>;
-		shunt-resistor = <1000>;
-	};
-
-};
-
-&i2c1 {
-	status = "okay";
-	codec: sgtl5000@a {
-		#sound-dai-cells = <0>;
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&sys_mclk>;
-	};
-};
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	/* NOR Flash on board */
-	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
-	status = "okay";
-
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x8000000>;
-		big-endian;
-		bank-width = <2>;
-		device-width = <1>;
-	};
-};
-
-&lpuart0 {
-	status = "okay";
-};
-
-&mdio0 {
-	sgmii_phy0: ethernet-phy@0 {
-		reg = <0x0>;
-	};
-	rgmii_phy1: ethernet-phy@1 {
-		reg = <0x1>;
-	};
-	sgmii_phy2: ethernet-phy@2 {
-		reg = <0x2>;
-	};
-	tbi0: tbi-phy@1f {
-		reg = <0x1f>;
-		device_type = "tbi-phy";
-	};
-};
-
-&mdio1 {
-	tbi1: tbi-phy@1f {
-		reg = <0x1f>;
-		device_type = "tbi-phy";
-	};
-};
-
-&esdhc {
-        status = "okay";
-};
-
-&qspi {
-	status = "okay";
-
-	n25q128a130: flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
-	};
-};
-
-&sai1 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&can0 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "disabled";
-};
-
-&can3 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
deleted file mode 100644
index 49c78c84cd5df..0000000000000
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ /dev/null
@@ -1,987 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2013-2014 Freescale Semiconductor, Inc.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&gic>;
-
-	aliases {
-		crypto = &crypto;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		rtc1 = &ftm_alarm0;
-		serial0 = &lpuart0;
-		serial1 = &lpuart1;
-		serial2 = &lpuart2;
-		serial3 = &lpuart3;
-		serial4 = &lpuart4;
-		serial5 = &lpuart5;
-		sysclk = &sysclk;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@f00 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0xf00>;
-			clocks = <&clockgen 1 0>;
-			#cooling-cells = <2>;
-		};
-
-		cpu1: cpu@f01 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0xf01>;
-			clocks = <&clockgen 1 0>;
-			#cooling-cells = <2>;
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x0>;
-	};
-
-	sysclk: sysclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-		clock-output-names = "sysclk";
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	reboot {
-		compatible = "syscon-reboot";
-		regmap = <&dcfg>;
-		offset = <0xb0>;
-		mask = <0x02>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		device_type = "soc";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		ddr: memory-controller@1080000 {
-			compatible = "fsl,qoriq-memory-controller";
-			reg = <0x0 0x1080000 0x0 0x1000>;
-			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-			big-endian;
-		};
-
-		gic: interrupt-controller@1400000 {
-			compatible = "arm,gic-400", "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x0 0x1401000 0x0 0x1000>,
-			      <0x0 0x1402000 0x0 0x2000>,
-			      <0x0 0x1404000 0x0 0x2000>,
-			      <0x0 0x1406000 0x0 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-
-		};
-
-		msi1: msi-controller@1570e00 {
-			compatible = "fsl,ls1021a-msi";
-			reg = <0x0 0x1570e00 0x0 0x8>;
-			msi-controller;
-			interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		msi2: msi-controller@1570e08 {
-			compatible = "fsl,ls1021a-msi";
-			reg = <0x0 0x1570e08 0x0 0x8>;
-			msi-controller;
-			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		ifc: memory-controller@1530000 {
-			compatible = "fsl,ifc";
-			reg = <0x0 0x1530000 0x0 0x10000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		sfp: efuse@1e80000 {
-			compatible = "fsl,ls1021a-sfp";
-			reg = <0x0 0x1e80000 0x0 0x10000>;
-			clocks = <&clockgen 4 3>;
-			clock-names = "sfp";
-		};
-
-		dcfg: dcfg@1ee0000 {
-			compatible = "fsl,ls1021a-dcfg", "syscon";
-			reg = <0x0 0x1ee0000 0x0 0x1000>;
-			big-endian;
-		};
-
-		qspi: spi@1550000 {
-			compatible = "fsl,ls1021a-qspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x1550000 0x0 0x10000>,
-			      <0x0 0x40000000 0x0 0x20000000>;
-			reg-names = "QuadSPI", "QuadSPI-memory";
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "qspi_en", "qspi";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		esdhc: esdhc@1560000 {
-			compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
-			reg = <0x0 0x1560000 0x0 0x10000>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0>;
-			voltage-ranges = <1800 1800 3300 3300>;
-			sdhci,auto-cmd12;
-			big-endian;
-			bus-width = <4>;
-			status = "disabled";
-		};
-
-		sata: sata@3200000 {
-			compatible = "fsl,ls1021a-ahci";
-			reg = <0x0 0x3200000 0x0 0x10000>,
-			      <0x0 0x20220520 0x0 0x4>;
-			reg-names = "ahci", "sata-ecc";
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		scfg: scfg@1570000 {
-			compatible = "fsl,ls1021a-scfg", "syscon";
-			reg = <0x0 0x1570000 0x0 0x10000>;
-			big-endian;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x1570000 0x10000>;
-
-			extirq: interrupt-controller@1ac {
-				compatible = "fsl,ls1021a-extirq";
-				#interrupt-cells = <2>;
-				#address-cells = <0>;
-				interrupt-controller;
-				reg = <0x1ac 4>;
-				interrupt-map =
-					<0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-					<1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-					<2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-					<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-					<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-					<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-map-mask = <0x7 0x0>;
-			};
-		};
-
-		crypto: crypto@1700000 {
-			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
-			fsl,sec-era = <7>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg		 = <0x0 0x1700000 0x0 0x100000>;
-			ranges		 = <0x0 0x0 0x1700000 0x100000>;
-			interrupts	 = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
-
-			sec_jr0: jr@10000 {
-				compatible = "fsl,sec-v5.0-job-ring",
-				     "fsl,sec-v4.0-job-ring";
-				reg = <0x10000 0x10000>;
-				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			sec_jr1: jr@20000 {
-				compatible = "fsl,sec-v5.0-job-ring",
-				     "fsl,sec-v4.0-job-ring";
-				reg = <0x20000 0x10000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			sec_jr2: jr@30000 {
-				compatible = "fsl,sec-v5.0-job-ring",
-				     "fsl,sec-v4.0-job-ring";
-				reg = <0x30000 0x10000>;
-				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			sec_jr3: jr@40000 {
-				compatible = "fsl,sec-v5.0-job-ring",
-				     "fsl,sec-v4.0-job-ring";
-				reg = <0x40000 0x10000>;
-				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-		};
-
-		clockgen: clocking@1ee1000 {
-			compatible = "fsl,ls1021a-clockgen";
-			reg = <0x0 0x1ee1000 0x0 0x1000>;
-			#clock-cells = <2>;
-			clocks = <&sysclk>;
-		};
-
-		tmu: tmu@1f00000 {
-			compatible = "fsl,qoriq-tmu";
-			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;
-			fsl,tmu-calibration = <0x00000000 0x00000020>,
-					      <0x00000001 0x00000024>,
-					      <0x00000002 0x0000002a>,
-					      <0x00000003 0x00000032>,
-					      <0x00000004 0x00000038>,
-					      <0x00000005 0x0000003e>,
-					      <0x00000006 0x00000043>,
-					      <0x00000007 0x0000004a>,
-					      <0x00000008 0x00000050>,
-					      <0x00000009 0x00000059>,
-					      <0x0000000a 0x0000005f>,
-					      <0x0000000b 0x00000066>,
-
-					      <0x00010000 0x00000023>,
-					      <0x00010001 0x0000002b>,
-					      <0x00010002 0x00000033>,
-					      <0x00010003 0x0000003a>,
-					      <0x00010004 0x00000042>,
-					      <0x00010005 0x0000004a>,
-					      <0x00010006 0x00000054>,
-					      <0x00010007 0x0000005c>,
-					      <0x00010008 0x00000065>,
-					      <0x00010009 0x0000006f>,
-
-					      <0x00020000 0x00000029>,
-					      <0x00020001 0x00000033>,
-					      <0x00020002 0x0000003d>,
-					      <0x00020003 0x00000048>,
-					      <0x00020004 0x00000054>,
-					      <0x00020005 0x00000060>,
-					      <0x00020006 0x0000006c>,
-
-					      <0x00030000 0x00000025>,
-					      <0x00030001 0x00000033>,
-					      <0x00030002 0x00000043>,
-					      <0x00030003 0x00000055>;
-			#thermal-sensor-cells = <1>;
-		};
-
-		dspi0: spi@2100000 {
-			compatible = "fsl,ls1021a-v1.0-dspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "dspi";
-			clocks = <&clockgen 4 1>;
-			spi-num-chipselects = <6>;
-			big-endian;
-			status = "disabled";
-		};
-
-		dspi1: spi@2110000 {
-			compatible = "fsl,ls1021a-v1.0-dspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2110000 0x0 0x10000>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "dspi";
-			clocks = <&clockgen 4 1>;
-			spi-num-chipselects = <6>;
-			big-endian;
-			status = "disabled";
-		};
-
-		i2c0: i2c@2180000 {
-			compatible = "fsl,vf610-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2180000 0x0 0x10000>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			dma-names = "rx", "tx";
-			dmas = <&edma0 1 38>, <&edma0 1 39>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@2190000 {
-			compatible = "fsl,vf610-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2190000 0x0 0x10000>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			dma-names = "rx", "tx";
-			dmas = <&edma0 1 36>, <&edma0 1 37>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@21a0000 {
-			compatible = "fsl,vf610-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x21a0000 0x0 0x10000>;
-			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			dma-names = "rx", "tx";
-			dmas = <&edma0 1 34>, <&edma0 1 35>;
-			status = "disabled";
-		};
-
-		uart0: serial@21c0500 {
-			compatible = "fsl,16550-FIFO64", "ns16550a";
-			reg = <0x0 0x21c0500 0x0 0x100>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0>;
-			fifo-size = <15>;
-			status = "disabled";
-		};
-
-		uart1: serial@21c0600 {
-			compatible = "fsl,16550-FIFO64", "ns16550a";
-			reg = <0x0 0x21c0600 0x0 0x100>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0>;
-			fifo-size = <15>;
-			status = "disabled";
-		};
-
-		uart2: serial@21d0500 {
-			compatible = "fsl,16550-FIFO64", "ns16550a";
-			reg = <0x0 0x21d0500 0x0 0x100>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0>;
-			fifo-size = <15>;
-			status = "disabled";
-		};
-
-		uart3: serial@21d0600 {
-			compatible = "fsl,16550-FIFO64", "ns16550a";
-			reg = <0x0 0x21d0600 0x0 0x100>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0>;
-			fifo-size = <15>;
-			status = "disabled";
-		};
-
-		counter0: counter@29d0000 {
-			compatible = "fsl,ftm-quaddec";
-			reg = <0x0 0x29d0000 0x0 0x10000>;
-			big-endian;
-			status = "disabled";
-		};
-
-		counter1: counter@29e0000 {
-			compatible = "fsl,ftm-quaddec";
-			reg = <0x0 0x29e0000 0x0 0x10000>;
-			big-endian;
-			status = "disabled";
-		};
-
-		counter2: counter@29f0000 {
-			compatible = "fsl,ftm-quaddec";
-			reg = <0x0 0x29f0000 0x0 0x10000>;
-			big-endian;
-			status = "disabled";
-		};
-
-		counter3: counter@2a00000 {
-			compatible = "fsl,ftm-quaddec";
-			reg = <0x0 0x2a00000 0x0 0x10000>;
-			big-endian;
-			status = "disabled";
-		};
-
-		gpio0: gpio@2300000 {
-			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
-			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio1: gpio@2310000 {
-			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
-			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@2320000 {
-			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
-			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@2330000 {
-			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
-			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		lpuart0: serial@2950000 {
-			compatible = "fsl,ls1021a-lpuart";
-			reg = <0x0 0x2950000 0x0 0x1000>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysclk>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		lpuart1: serial@2960000 {
-			compatible = "fsl,ls1021a-lpuart";
-			reg = <0x0 0x2960000 0x0 0x1000>;
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		lpuart2: serial@2970000 {
-			compatible = "fsl,ls1021a-lpuart";
-			reg = <0x0 0x2970000 0x0 0x1000>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		lpuart3: serial@2980000 {
-			compatible = "fsl,ls1021a-lpuart";
-			reg = <0x0 0x2980000 0x0 0x1000>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		lpuart4: serial@2990000 {
-			compatible = "fsl,ls1021a-lpuart";
-			reg = <0x0 0x2990000 0x0 0x1000>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		lpuart5: serial@29a0000 {
-			compatible = "fsl,ls1021a-lpuart";
-			reg = <0x0 0x29a0000 0x0 0x1000>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		pwm0: pwm@29d0000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x29d0000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				"ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				<&clockgen 4 1>, <&clockgen 4 1>;
-			big-endian;
-			status = "disabled";
-		};
-
-		pwm1: pwm@29e0000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x29e0000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				"ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				<&clockgen 4 1>, <&clockgen 4 1>;
-			big-endian;
-			status = "disabled";
-		};
-
-		pwm2: pwm@29f0000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x29f0000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				"ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				<&clockgen 4 1>, <&clockgen 4 1>;
-			big-endian;
-			status = "disabled";
-		};
-
-		pwm3: pwm@2a00000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2a00000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				"ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				<&clockgen 4 1>, <&clockgen 4 1>;
-			big-endian;
-			status = "disabled";
-		};
-
-		pwm4: pwm@2a10000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2a10000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				"ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				<&clockgen 4 1>, <&clockgen 4 1>;
-			big-endian;
-			status = "disabled";
-		};
-
-		pwm5: pwm@2a20000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2a20000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				"ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				<&clockgen 4 1>, <&clockgen 4 1>;
-			big-endian;
-			status = "disabled";
-		};
-
-		pwm6: pwm@2a30000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2a30000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				"ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				<&clockgen 4 1>, <&clockgen 4 1>;
-			big-endian;
-			status = "disabled";
-		};
-
-		pwm7: pwm@2a40000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2a40000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				"ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				<&clockgen 4 1>, <&clockgen 4 1>;
-			big-endian;
-			status = "disabled";
-		};
-
-		wdog0: watchdog@2ad0000 {
-			compatible = "fsl,imx21-wdt";
-			reg = <0x0 0x2ad0000 0x0 0x10000>;
-			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			clock-names = "wdog-en";
-			big-endian;
-		};
-
-		sai1: sai@2b50000 {
-			#sound-dai-cells = <0>;
-			compatible = "fsl,vf610-sai";
-			reg = <0x0 0x2b50000 0x0 0x10000>;
-			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&clockgen 4 1>, <&clockgen 4 1>;
-			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 47>,
-			       <&edma0 1 46>;
-			status = "disabled";
-		};
-
-		sai2: sai@2b60000 {
-			#sound-dai-cells = <0>;
-			compatible = "fsl,vf610-sai";
-			reg = <0x0 0x2b60000 0x0 0x10000>;
-			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&clockgen 4 1>, <&clockgen 4 1>;
-			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 45>,
-			       <&edma0 1 44>;
-			status = "disabled";
-		};
-
-		edma0: dma-controller@2c00000 {
-			#dma-cells = <2>;
-			compatible = "fsl,vf610-edma";
-			reg = <0x0 0x2c00000 0x0 0x10000>,
-			      <0x0 0x2c10000 0x0 0x10000>,
-			      <0x0 0x2c20000 0x0 0x10000>;
-			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma-tx", "edma-err";
-			dma-channels = <32>;
-			big-endian;
-			clock-names = "dmamux0", "dmamux1";
-			clocks = <&clockgen 4 1>,
-				 <&clockgen 4 1>;
-		};
-
-		dcu: dcu@2ce0000 {
-			compatible = "fsl,ls1021a-dcu";
-			reg = <0x0 0x2ce0000 0x0 0x10000>;
-			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 0>,
-				<&clockgen 4 0>;
-			clock-names = "dcu", "pix";
-			big-endian;
-			status = "disabled";
-		};
-
-		mdio0: mdio@2d24000 {
-			compatible = "gianfar";
-			device_type = "mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2d24000 0x0 0x4000>,
-			      <0x0 0x2d10030 0x0 0x4>;
-		};
-
-		mdio1: mdio@2d64000 {
-			compatible = "gianfar";
-			device_type = "mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2d64000 0x0 0x4000>,
-			      <0x0 0x2d50030 0x0 0x4>;
-		};
-
-		ptp_clock@2d10e00 {
-			compatible = "fsl,etsec-ptp";
-			reg = <0x0 0x2d10e00 0x0 0xb0>;
-			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			fsl,tclk-period = <5>;
-			fsl,tmr-prsc    = <2>;
-			fsl,tmr-add     = <0xaaaaaaab>;
-			fsl,tmr-fiper1  = <999999995>;
-			fsl,tmr-fiper2  = <999999995>;
-			fsl,max-adj     = <499999999>;
-			fsl,extts-fifo;
-		};
-
-		enet0: ethernet@2d10000 {
-			compatible = "fsl,etsec2";
-			device_type = "network";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			interrupt-parent = <&gic>;
-			model = "eTSEC";
-			fsl,magic-packet;
-			ranges;
-			dma-coherent;
-
-			queue-group@2d10000 {
-				#address-cells = <2>;
-				#size-cells = <2>;
-				reg = <0x0 0x2d10000 0x0 0x1000>;
-				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			queue-group@2d14000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
-				reg = <0x0 0x2d14000 0x0 0x1000>;
-				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		enet1: ethernet@2d50000 {
-			compatible = "fsl,etsec2";
-			device_type = "network";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			interrupt-parent = <&gic>;
-			model = "eTSEC";
-			ranges;
-			dma-coherent;
-
-			queue-group@2d50000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
-				reg = <0x0 0x2d50000 0x0 0x1000>;
-				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			queue-group@2d54000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
-				reg = <0x0 0x2d54000 0x0 0x1000>;
-				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		enet2: ethernet@2d90000 {
-			compatible = "fsl,etsec2";
-			device_type = "network";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			interrupt-parent = <&gic>;
-			model = "eTSEC";
-			ranges;
-			dma-coherent;
-
-			queue-group@2d90000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
-				reg = <0x0 0x2d90000 0x0 0x1000>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			queue-group@2d94000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
-				reg = <0x0 0x2d94000 0x0 0x1000>;
-				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		usb2: usb@8600000 {
-			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
-			reg = <0x0 0x8600000 0x0 0x1000>;
-			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "host";
-			phy_type = "ulpi";
-		};
-
-		usb3: usb@3100000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3100000 0x0 0x10000>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-		};
-
-		pcie@3400000 {
-			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */
-			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
-			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-			fsl,pcie-scfg = <&scfg 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			num-viewport = <6>;
-			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */
-				 <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&msi1>, <&msi2>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
-					<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-					<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-					<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		pcie@3500000 {
-			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */
-			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
-			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-			fsl,pcie-scfg = <&scfg 1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			num-viewport = <6>;
-			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */
-				 <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&msi1>, <&msi2>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0000 0 0 1 &gic GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
-					<0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-					<0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
-					<0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		can0: can@2a70000 {
-			compatible = "fsl,ls1021ar2-flexcan";
-			reg = <0x0 0x2a70000 0x0 0x1000>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
-			clock-names = "ipg", "per";
-			big-endian;
-			status = "disabled";
-		};
-
-		can1: can@2a80000 {
-			compatible = "fsl,ls1021ar2-flexcan";
-			reg = <0x0 0x2a80000 0x0 0x1000>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
-			clock-names = "ipg", "per";
-			big-endian;
-			status = "disabled";
-		};
-
-		can2: can@2a90000 {
-			compatible = "fsl,ls1021ar2-flexcan";
-			reg = <0x0 0x2a90000 0x0 0x1000>;
-			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
-			clock-names = "ipg", "per";
-			big-endian;
-			status = "disabled";
-		};
-
-		can3: can@2aa0000 {
-			compatible = "fsl,ls1021ar2-flexcan";
-			reg = <0x0 0x2aa0000 0x0 0x1000>;
-			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
-			clock-names = "ipg", "per";
-			big-endian;
-			status = "disabled";
-		};
-
-		ocram1: sram@10000000 {
-			compatible = "mmio-sram";
-			reg = <0x0 0x10000000 0x0 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x10000000 0x10000>;
-		};
-
-		ocram2: sram@10010000 {
-			compatible = "mmio-sram";
-			reg = <0x0 0x10010000 0x0 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x10010000 0x10000>;
-		};
-
-		qdma: dma-controller@8390000 {
-			compatible = "fsl,ls1021a-qdma";
-			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
-			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
-			      <0x0 0x838a000 0x0 0x2000>; /* Block regs */
-			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "qdma-error",
-				"qdma-queue0", "qdma-queue1";
-			#dma-cells = <2>;
-			dma-channels = <8>;
-			block-number = <1>;
-			block-offset = <0x1000>;
-			fsl,dma-queues = <2>;
-			status-sizes = <64>;
-			queue-sizes = <64 64>;
-			big-endian;
-		};
-
-		rcpm: power-controller@1ee2140 {
-			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
-			reg = <0x0 0x1ee2140 0x0 0x8>;
-			#fsl,rcpm-wakeup-cells = <2>;
-			#power-domain-cells = <0>;
-		};
-
-		ftm_alarm0: timer0@29d0000 {
-			compatible = "fsl,ls1021a-ftm-alarm";
-			reg = <0x0 0x29d0000 0x0 0x10000>;
-			reg-names = "ftm";
-			fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			big-endian;
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <1000>;
-			polling-delay = <5000>;
-
-			thermal-sensors = <&tmu 0>;
-
-			trips {
-				cpu_alert: cpu-alert {
-					temperature = <85000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit: cpu-crit {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu_alert>;
-					cooling-device =
-						<&cpu0 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>,
-						<&cpu1 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/marvell/Makefile b/arch/arm/boot/dts/marvell/Makefile
new file mode 100644
index 0000000000000..1e0f5ff492f78
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/Makefile
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MMP) += \
+	pxa168-aspenite.dtb \
+	pxa910-dkb.dtb \
+	mmp2-brownstone.dtb \
+	mmp2-olpc-xo-1-75.dtb \
+	mmp3-dell-ariel.dtb
+dtb-$(CONFIG_ARCH_ORION5X) += \
+	orion5x-kuroboxpro.dtb \
+	orion5x-lacie-d2-network.dtb \
+	orion5x-lacie-ethernet-disk-mini-v2.dtb \
+	orion5x-linkstation-lsgl.dtb \
+	orion5x-linkstation-lswtgl.dtb \
+	orion5x-linkstation-lschl.dtb \
+	orion5x-lswsgl.dtb \
+	orion5x-maxtor-shared-storage-2.dtb \
+	orion5x-netgear-wnr854t.dtb \
+	orion5x-rd88f5182-nas.dtb
+dtb-$(CONFIG_MACH_ARMADA_370) += \
+	armada-370-c200-v2.dtb \
+	armada-370-db.dtb \
+	armada-370-dlink-dns327l.dtb \
+	armada-370-mirabox.dtb \
+	armada-370-netgear-rn102.dtb \
+	armada-370-netgear-rn104.dtb \
+	armada-370-rd.dtb \
+	armada-370-seagate-nas-2bay.dtb \
+	armada-370-seagate-nas-4bay.dtb \
+	armada-370-seagate-personal-cloud.dtb \
+	armada-370-seagate-personal-cloud-2bay.dtb \
+	armada-370-synology-ds213j.dtb
+dtb-$(CONFIG_MACH_ARMADA_375) += \
+	armada-375-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_38X) += \
+	armada-381-netgear-gs110emx.dtb \
+	armada-382-rd-ac3x-48g4x2xl.dtb \
+	armada-385-atl-x530.dtb \
+	armada-385-clearfog-gtr-s4.dtb \
+	armada-385-clearfog-gtr-l8.dtb \
+	armada-385-db-88f6820-amc.dtb \
+	armada-385-db-ap.dtb \
+	armada-385-linksys-caiman.dtb \
+	armada-385-linksys-cobra.dtb \
+	armada-385-linksys-rango.dtb \
+	armada-385-linksys-shelby.dtb \
+	armada-385-synology-ds116.dtb \
+	armada-385-turris-omnia.dtb \
+	armada-388-clearfog.dtb \
+	armada-388-clearfog-base.dtb \
+	armada-388-clearfog-pro.dtb \
+	armada-388-db.dtb \
+	armada-388-gp.dtb \
+	armada-388-helios4.dtb \
+	armada-388-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_39X) += \
+	armada-390-db.dtb \
+	armada-395-gp.dtb \
+	armada-398-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_XP) += \
+	armada-xp-axpwifiap.dtb \
+	armada-xp-crs305-1g-4s.dtb \
+	armada-xp-crs305-1g-4s-bit.dtb \
+	armada-xp-crs326-24g-2s.dtb \
+	armada-xp-crs326-24g-2s-bit.dtb \
+	armada-xp-crs328-4c-20s-4s.dtb \
+	armada-xp-crs328-4c-20s-4s-bit.dtb \
+	armada-xp-db.dtb \
+	armada-xp-db-dxbc2.dtb \
+	armada-xp-db-xc3-24g4xg.dtb \
+	armada-xp-gp.dtb \
+	armada-xp-lenovo-ix4-300d.dtb \
+	armada-xp-linksys-mamba.dtb \
+	armada-xp-matrix.dtb \
+	armada-xp-netgear-rn2120.dtb \
+	armada-xp-openblocks-ax3-4.dtb \
+	armada-xp-synology-ds414.dtb
+dtb-$(CONFIG_MACH_DOVE) += \
+	dove-cubox.dtb \
+	dove-cubox-es.dtb \
+	dove-d2plug.dtb \
+	dove-d3plug.dtb \
+	dove-dove-db.dtb \
+	dove-sbc-a510.dtb
+dtb-$(CONFIG_MACH_KIRKWOOD) += \
+	kirkwood-4i-edge-200.dtb \
+	kirkwood-b3.dtb \
+	kirkwood-blackarmor-nas220.dtb \
+	kirkwood-c200-v1.dtb \
+	kirkwood-cloudbox.dtb \
+	kirkwood-d2net.dtb \
+	kirkwood-db-88f6281.dtb \
+	kirkwood-db-88f6282.dtb \
+	kirkwood-dir665.dtb \
+	kirkwood-dns320.dtb \
+	kirkwood-dns325.dtb \
+	kirkwood-dockstar.dtb \
+	kirkwood-dreamplug.dtb \
+	kirkwood-ds109.dtb \
+	kirkwood-ds110jv10.dtb \
+	kirkwood-ds111.dtb \
+	kirkwood-ds112.dtb \
+	kirkwood-ds209.dtb \
+	kirkwood-ds210.dtb \
+	kirkwood-ds212.dtb \
+	kirkwood-ds212j.dtb \
+	kirkwood-ds409.dtb \
+	kirkwood-ds409slim.dtb \
+	kirkwood-ds411.dtb \
+	kirkwood-ds411j.dtb \
+	kirkwood-ds411slim.dtb \
+	kirkwood-goflexnet.dtb \
+	kirkwood-guruplug-server-plus.dtb \
+	kirkwood-ib62x0.dtb \
+	kirkwood-iconnect.dtb \
+	kirkwood-iomega_ix2_200.dtb \
+	kirkwood-is2.dtb \
+	kirkwood-km_fixedeth.dtb \
+	kirkwood-km_kirkwood.dtb \
+	kirkwood-l-50.dtb \
+	kirkwood-laplug.dtb \
+	kirkwood-linkstation-lsqvl.dtb \
+	kirkwood-linkstation-lsvl.dtb \
+	kirkwood-linkstation-lswsxl.dtb \
+	kirkwood-linkstation-lswvl.dtb \
+	kirkwood-linkstation-lswxl.dtb \
+	kirkwood-linksys-viper.dtb \
+	kirkwood-lschlv2.dtb \
+	kirkwood-lsxhl.dtb \
+	kirkwood-mplcec4.dtb \
+	kirkwood-mv88f6281gtw-ge.dtb \
+	kirkwood-nas2big.dtb \
+	kirkwood-net2big.dtb \
+	kirkwood-net5big.dtb \
+	kirkwood-netgear_readynas_duo_v2.dtb \
+	kirkwood-netgear_readynas_nv+_v2.dtb \
+	kirkwood-ns2.dtb \
+	kirkwood-ns2lite.dtb \
+	kirkwood-ns2max.dtb \
+	kirkwood-ns2mini.dtb \
+	kirkwood-nsa310.dtb \
+	kirkwood-nsa310a.dtb \
+	kirkwood-nsa310s.dtb \
+	kirkwood-nsa320.dtb \
+	kirkwood-nsa325.dtb \
+	kirkwood-openblocks_a6.dtb \
+	kirkwood-openblocks_a7.dtb \
+	kirkwood-openrd-base.dtb \
+	kirkwood-openrd-client.dtb \
+	kirkwood-openrd-ultimate.dtb \
+	kirkwood-pogo_e02.dtb \
+	kirkwood-pogoplug-series-4.dtb \
+	kirkwood-rd88f6192.dtb \
+	kirkwood-rd88f6281-z0.dtb \
+	kirkwood-rd88f6281-a.dtb \
+	kirkwood-rs212.dtb \
+	kirkwood-rs409.dtb \
+	kirkwood-rs411.dtb \
+	kirkwood-sheevaplug.dtb \
+	kirkwood-sheevaplug-esata.dtb \
+	kirkwood-t5325.dtb \
+	kirkwood-topkick.dtb \
+	kirkwood-ts219-6281.dtb \
+	kirkwood-ts219-6282.dtb \
+	kirkwood-ts419-6281.dtb \
+	kirkwood-ts419-6282.dtb
diff --git a/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts b/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts
new file mode 100644
index 0000000000000..84d40e1d70eff
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Ctera C200-V2
+ *
+ * Copyright (C) 2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V2";
+	compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+	};
+
+	thermal-zones {
+		ethphy-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&ethphy0>;
+
+			trips {
+				ethphy_alert1: trip1 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+
+				ethphy_crit: trip2 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pinctrl-0 = <&pmx_beeper>;
+		pinctrl-names = "default";
+		pwms = <&gpio1 31 4000>;
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		button-power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+		};
+
+		led-10 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&coherencyfab {
+	broken-idle;
+};
+
+&eth1 {
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "rgmii-id";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+
+	hwmon@2a {
+		compatible = "nuvoton,nct7802";
+		reg = <0x2a>;
+	};
+
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0x200000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "certificate";
+				reg = <0x0200000 0x100000>;
+				read-only;
+			};
+
+			partition@300000 {
+				label = "preset_cfg";
+				reg = <0x0300000 0x100000>;
+				read-only;
+			};
+
+			partition@400000 {
+				label = "dev_params";
+				reg = <0x0400000 0x100000>;
+				read-only;
+			};
+			partition@500000 {
+				label = "active_bank";
+				reg = <0x0500000 0x0100000>;
+			};
+
+			partition@600000 {
+				label = "magic";
+				reg = <0x0600000 0x0100000>;
+				read-only;
+			};
+
+			partition@700000 {
+				label = "bank1";
+				reg = <0x0700000 0x2800000>;
+			};
+
+			partition@2f00000 {
+				label = "bank2";
+				reg = <0x2f00000 0x2800000>;
+			};
+
+			/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+			partition@5a00000 {
+				label = "reserved";
+				reg = <0x5a00000 0x2000000>;
+			};
+
+			partition@7a00000 {
+				label = "rootfs";
+				reg = <0x7a00000 0x8600000>;
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */
+		pinctrl-0 = <&pmx_pcie>;
+		pinctrl-names = "default";
+		status = "okay";
+		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp7";
+		marvell,function = "gpo";
+	};
+
+	pmx_power_cpu: pmx-power-cpu {
+		marvell,pins = "mpp4";
+		marvell,function = "vdd";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds1: pmx-leds1 {
+		marvell,pins = "mpp47";
+		marvell,function = "gpo";
+	};
+
+	pmx_leds2: pmx-leds2 {
+		marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
+			       "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
+		marvell,function = "gpio";
+	};
+
+	pmx_pcie: pmx-pcie {
+		marvell,pins = "mpp59";
+		marvell,function = "gpio";
+	};
+
+	pmx_beeper: pmx-beeper {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+};
+
+&pmsu {
+	pinctrl-0 = <&pmx_power_cpu>;
+	pinctrl-names = "default";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	nr-ports = <2>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd0_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	hdd1_temp: sata-port@1 {
+		reg = <1>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-db.dts b/arch/arm/boot/dts/marvell/armada-370-db.dts
new file mode 100644
index 0000000000000..a7dc4c04d10bd
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-db.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 370 evaluation board
+ * (DB-88F6710-BP-DDR3)
+ *
+ *  Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-370.dtsi"
+
+/ {
+	model = "Marvell Armada 370 Evaluation Board";
+	compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <100000>;
+				status = "okay";
+				audio_codec: audio-codec@4a {
+					#sound-dai-cells = <0>;
+					compatible = "cirrus,cs42l51";
+					reg = <0x4a>;
+				};
+			};
+
+			audio-controller@30000 {
+				pinctrl-0 = <&i2s_pins2>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				/*
+				 * This device is disabled by default, because
+				 * using the SD card connector requires
+				 * changing the default CON40 connector
+				 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
+				 * different connector
+				 * "DB-88F6710_MPP_RGMII_SD_Jumper".
+				 */
+				status = "disabled";
+				/* No CD or WP GPIOs */
+				broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Armada 370 DB Audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Out Jack",
+			"Line", "In Jack";
+		simple-audio-card,routing =
+			"Out Jack", "HPL",
+			"Out Jack", "HPR",
+			"AIN1L", "In Jack",
+			"AIN1L", "In Jack";
+		status = "okay";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 0>;
+			};
+
+			codec {
+				sound-dai = <&audio_codec>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+
+		simple-audio-card,dai-link@2 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+};
+
+&pciec {
+	status = "okay";
+	/*
+	 * The two PCIe units are accessible through
+	 * both standard PCIe slots and mini-PCIe
+	 * slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mx25l25635e", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts
new file mode 100644
index 0000000000000..561195b749ebe
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for D-Link DNS-327L
+ *
+ * Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org>
+ */
+
+/* Remaining unsolved:
+ * There's still some unknown device on i2c address 0x13
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "D-Link DNS-327L";
+	compatible = "dlink,dns327l",
+		"marvell,armada370",
+		"marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MiB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <
+			&backup_button_pin
+			&power_button_pin
+			&reset_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <
+			&sata_l_amber_pin
+			&sata_r_amber_pin
+			&backup_led_pin
+			/* Ensure these are managed by hardware */
+			&sata_l_white_pin
+			&sata_r_white_pin>;
+
+		pinctrl-names = "default";
+
+		led-sata-r-amber {
+			label = "dns327l:amber:sata-r";
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		led-sata-l-amber {
+			label = "dns327l:amber:sata-l";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		led-backup {
+			label = "dns327l:white:usb";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			pinctrl-0 = <&xhci_pwr_pin>;
+			pinctrl-names = "default";
+			regulator-name = "USB3.0 Port Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-boot-on;
+			regulator-always-on;
+			gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata_r_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-0 = <&sata_r_pwr_pin>;
+			pinctrl-names = "default";
+			regulator-name = "SATA-R Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata_l_power: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-0 = <&sata_l_pwr_pin>;
+			pinctrl-names = "default";
+			regulator-name = "SATA-L Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	sata_l_white_pin: sata-l-white-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "sata0";
+	};
+
+	sata_r_white_pin: sata-r-white-pin {
+		marvell,pins = "mpp55";
+		marvell,function = "sata1";
+	};
+
+	sata_r_amber_pin: sata-r-amber-pin {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+
+	sata_l_amber_pin: sata-l-amber-pin {
+		marvell,pins = "mpp53";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp61";
+		marvell,function = "gpo";
+	};
+
+	xhci_pwr_pin: xhci-pwr-pin {
+		marvell,pins = "mpp13";
+		marvell,function = "gpio";
+	};
+
+	sata_r_pwr_pin: sata-r-pwr-pin {
+		marvell,pins = "mpp54";
+		marvell,function = "gpio";
+	};
+
+	sata_l_pwr_pin: sata-l-pwr-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	uart1_pins: uart1-pins {
+		marvell,pins = "mpp60", "mpp61";
+		marvell,function = "uart1";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+};
+
+/* Serial console */
+&uart0 {
+	status = "okay";
+};
+
+/* Connected to Weltrend MCU */
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		marvell,reg-init = <0x2 0x19 0x0 0x0077>,
+				   <0x2 0x18 0x0 0x5747>;
+	};
+};
+
+&eth1 {
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	compatible = "marvell,mv64xxx-i2c";
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				/* 1.0 MiB */
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot-env";
+				/* 128 KiB */
+				reg = <0x100000 0x20000>;
+				read-only;
+			};
+
+			partition@120000 {
+				label = "uImage";
+				/* 7 MiB */
+				reg = <0x120000 0x700000>;
+			};
+
+			partition@820000 {
+				label = "ubifs";
+				/* ~ 84 MiB */
+				reg = <0x820000 0x54e0000>;
+			};
+
+			/* Hardcoded into stock bootloader */
+			partition@5d00000 {
+				label = "failsafe-uImage";
+				/* 5 MiB */
+				reg = <0x5d00000 0x500000>;
+			};
+
+			partition@6200000 {
+				label = "failsafe-fs";
+				/* 29 MiB */
+				reg = <0x6200000 0x1d00000>;
+			};
+
+			partition@7f00000 {
+				label = "bbt";
+				/* 1 MiB for BBT */
+				reg = <0x7f00000 0x100000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-mirabox.dts b/arch/arm/boot/dts/marvell/armada-370-mirabox.dts
new file mode 100644
index 0000000000000..7c2f5a79b50da
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-mirabox.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Mirabox
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Globalscale Mirabox";
+	compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			timer@20300 {
+				clock-frequency = <600000000>;
+				status = "okay";
+			};
+
+			gpio_leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
+
+				green_pwr_led {
+					label = "mirabox:green:pwr";
+					gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+					default-state = "keep";
+				};
+
+				blue_stat_led {
+					label = "mirabox:blue:stat";
+					gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+
+				green_stat_led {
+					label = "mirabox:green:stat";
+					gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			crypto@90000 {
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins3>;
+				pinctrl-names = "default";
+				status = "okay";
+				/*
+				 * No CD or WP GPIOs: SDIO interface used for
+				 * Wifi/Bluetooth chip
+				 */
+				 broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pca9505: pca9505@25 {
+					compatible = "nxp,pca9505";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x25>;
+				};
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected on the PCB to a USB 3.0 XHCI controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	pwr_led_pin: pwr-led-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+
+	stat_led_pins: stat-led-pins {
+		marvell,pins = "mpp64", "mpp65";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x400000>;
+			};
+			partition@400000 {
+				label = "Linux";
+				reg = <0x400000 0x400000>;
+			};
+			partition@800000 {
+				label = "Filesystem";
+				reg = <0x800000 0x3f800000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/marvell/armada-370-netgear-rn102.dts
new file mode 100644
index 0000000000000..079b37cf148a1
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-netgear-rn102.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NETGEAR ReadyNAS 102
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 102";
+	compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* eSATA interface */
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				clock-frequency = <100000>;
+
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+
+				status = "okay";
+
+				isl12057: rtc@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					wakeup-source;
+				};
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+			};
+		};
+	};
+
+	clocks {
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&power_led_pin
+			     &sata1_led_pin
+			     &sata2_led_pin
+			     &backup_led_pin>;
+		pinctrl-names = "default";
+
+		blue-power-led {
+			label = "rn102:blue:pwr";
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		blue-sata1-led {
+			label = "rn102:blue:sata1";
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		blue-sata2-led {
+			label = "rn102:blue:sata2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		blue-backup-led {
+			label = "rn102:blue:backup";
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin
+			     &reset_button_pin
+			     &backup_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Connected to Marvell 88SE9170 SATA controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to FL1009 USB 3.0 controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+
+	sata1_led_pin: sata1-led-pin {
+		marvell,pins = "mpp15";
+		marvell,function = "gpio";
+	};
+
+	sata2_led_pin: sata2-led-pin {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	poweroff: poweroff {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		/* Use Hardware BCH ECC */
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x180000>;  /* 1.5MB */
+				read-only;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x20000>;    /* 128KB */
+				read-only;
+			};
+
+			partition@200000 {
+				label = "uImage";
+				reg = <0x0200000 0x600000>;    /* 6MB */
+			};
+
+			partition@800000 {
+				label = "minirootfs";
+				reg = <0x0800000 0x400000>;    /* 4MB */
+			};
+
+			/* Last MB is for the BBT, i.e. not writable */
+			partition@c00000 {
+				label = "ubifs";
+				reg = <0x0c00000 0x7400000>; /* 116MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/marvell/armada-370-netgear-rn104.dts
new file mode 100644
index 0000000000000..d752ac1d7b58a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-netgear-rn104.dts
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NETGEAR ReadyNAS 104
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 104";
+	compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				clock-frequency = <100000>;
+
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+
+				status = "okay";
+
+				isl12057: rtc@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					wakeup-source;
+				};
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				pca9554: pca9554@23 {
+					compatible = "nxp,pca9554";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x23>;
+				};
+			};
+		};
+	};
+
+	clocks {
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&backup_led_pin &power_led_pin>;
+		pinctrl-names = "default";
+
+		blue-backup-led {
+			label = "rn104:blue:backup";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue-power-led {
+			label = "rn104:blue:pwr";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "keep";
+		};
+
+		blue-sata1-led {
+			label = "rn104:blue:sata1";
+			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata2-led {
+			label = "rn104:blue:sata2";
+			gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata3-led {
+			label = "rn104:blue:sata3";
+			gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata4-led {
+			label = "rn104:blue:sata4";
+			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	auxdisplay {
+		compatible = "hit,hd44780";
+		data-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>,
+				<&gpio1 26 GPIO_ACTIVE_HIGH>,
+				<&gpio1 27 GPIO_ACTIVE_HIGH>,
+				<&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		backlight-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		display-height-chars = <2>;
+		display-width-chars = <16>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&backup_button_pin
+			     &power_button_pin
+			     &reset_button_pin>;
+		pinctrl-names = "default";
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Connected to FL1009 USB 3.0 controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to Marvell 88SE9215 SATA controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	poweroff: poweroff {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		/* Use Hardware BCH ECC */
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x180000>;  /* 1.5MB */
+				read-only;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x20000>;    /* 128KB */
+				read-only;
+			};
+
+			partition@200000 {
+				label = "uImage";
+				reg = <0x0200000 0x600000>;    /* 6MB */
+			};
+
+			partition@800000 {
+				label = "minirootfs";
+				reg = <0x0800000 0x400000>;    /* 4MB */
+			};
+
+			/* Last MB is for the BBT, i.e. not writable */
+			partition@c00000 {
+				label = "ubifs";
+				reg = <0x0c00000 0x7400000>; /* 116MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts
new file mode 100644
index 0000000000000..b459a670f6158
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 370 Reference Design board
+ * (RD-88F6710-A1)
+ *
+ *  Copied from arch/arm/boot/dts/armada-370-db.dts
+ *
+ *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Marvell Armada 370 Reference Design";
+	compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				status = "okay";
+				/* No CD or WP GPIOs */
+				broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			gpio-keys {
+				compatible = "gpio-keys";
+				button {
+					label = "Software Button";
+					linux,code = <KEY_POWER>;
+					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			gpio-fan {
+				compatible = "gpio-fan";
+				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+				gpio-fan,speed-map = <0 0 3000 1>;
+				pinctrl-0 = <&fan_pins>;
+				pinctrl-names = "default";
+			};
+
+			gpio_leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&led_pins>;
+
+				sw_led {
+					label = "370rd:green:sw";
+					gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+					default-state = "keep";
+				};
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Internal mini-PCIe connector */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_WHITE>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
+	};
+
+	switch: switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan3";
+			};
+
+			port@5 {
+				reg = <5>;
+				ethernet = <&eth1>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switchphy0: switchphy@0 {
+				reg = <0>;
+				interrupt-parent = <&switch>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy1: switchphy@1 {
+				reg = <1>;
+				interrupt-parent = <&switch>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy2: switchphy@2 {
+				reg = <2>;
+				interrupt-parent = <&switch>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy3: switchphy@3 {
+				reg = <3>;
+				interrupt-parent = <&switch>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
+
+
+&pinctrl {
+	fan_pins: fan-pins {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+
+	led_pins: led-pins {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
new file mode 100644
index 0000000000000..8dd242e668e65
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 2-Bay
+ * Code name (board/PCB)        : Dart 2-Bay
+ * Model name (case sticker)    : SRPD20
+ * Material desc (product spec) : STCTxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+
+/ {
+	model = "Seagate NAS 2-Bay (Dart, SRPD20)";
+	compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp";
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3
+			  950 2
+			 1400 1
+			 1800 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
new file mode 100644
index 0000000000000..9cb69999b1dbc
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 4-Bay
+ * Code name (board/PCB)        : Dart 4-Bay
+ * Model name (case sticker)    : SRPD40
+ * Material desc (product spec) : STCUxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+#include <dt-bindings/leds/leds-ns2.h>
+
+/ {
+	model = "Seagate NAS 4-Bay (Dart, SRPD40)";
+	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				/* I2C GPIO expander (PCA9554A) */
+				pca9554: pca9554@21 {
+					compatible = "nxp,pca9554";
+					reg = <0x21>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+			};
+		};
+	};
+
+	regulators {
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "SATA2 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
+		};
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "SATA3 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		led-red-sata2 {
+			label = "dart:red:sata2";
+			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+		};
+		led-red-sata3 {
+			label = "dart:red:sata3";
+			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds-ns2 {
+		compatible = "lacie,ns2-leds";
+
+		white-sata2 {
+			label = "dart:white:sata2";
+			cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+		white-sata3 {
+			label = "dart:white:sata3";
+			cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+	};
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3
+			  800 2
+			  1050 1
+			  1300 0>;
+	};
+};
+
+&pciec {
+	/* SATA AHCI controller 88SE9170 */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi
new file mode 100644
index 0000000000000..822f10734946d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * TODO: add support for the white SATA LEDs associated with HDD 0 and 1.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <100000>;
+
+				/* RTC - NXP 8563T (second source) */
+				rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+					interrupts = <110>;
+				};
+				/* RTC - MCP7940NT */
+				rtc@6f {
+					compatible = "microchip,mcp7941x";
+					reg = <0x6f>;
+					interrupts = <110>;
+				};
+			};
+		};
+
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		};
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio2 0 GPIO_ACTIVE_HIGH
+			 &gpio2 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button-backup {
+			label = "Backup button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-white-power {
+			label = "dart:white:power";
+			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+
+		};
+		led-red-power {
+			label = "dart:red:power";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		};
+		led-red-sata0 {
+			label = "dart:red:sata0";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		led-red-sata1 {
+			label = "dart:red:sata1";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* USB 3.0 bridge ASM1042A */
+	pcie@2,0 {
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
+	pinctrl-names = "default";
+
+	hdd0_led_sata_pin: hdd0-led-sata-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "sata1";
+	};
+	hdd0_led_gpio_pin: hdd0-led-gpio-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+	hdd1_led_sata_pin: hdd1-led-sata-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "sata0";
+	};
+	hdd1_led_gpio_pin: hdd1-led-gpio-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x300000>;
+			};
+			partition@300000 {
+				label = "device-tree";
+				reg = <0x300000 0x20000>;
+			};
+			partition@320000 {
+				label = "linux";
+				reg = <0x320000 0x2000000>;
+			};
+			partition@2320000 {
+				label = "rootfs";
+				reg = <0x2320000 0xdce0000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts
new file mode 100644
index 0000000000000..5ee572dc92423
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate Personal Cloud 2-Bay
+ * Code name (board/PCB)        : Cumulus Max
+ * Model name (case sticker)    : SRN22C
+ * Material desc (product spec) : STCSxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+	model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
+	compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+		};
+	};
+
+	regulators {
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dts
new file mode 100644
index 0000000000000..578b54b39c8f0
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate Personal Cloud
+ * Code name (board/PCB)        : Cumulus
+ * Model name (case sticker)    : SRN21C
+ * Material desc (product spec) : STCRxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+	model = "Seagate Personal Cloud (Cumulus, SRN21C)";
+	compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi
new file mode 100644
index 0000000000000..124a8ba279e37
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
+ * (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+/*
+ * TODO: add support for the white SATA LED.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			coherency-fabric@20200 {
+				broken-idle;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+		};
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <100>;
+		};
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button-usb {
+			label = "USB VBUS error";
+			linux,code = <KEY_UNKNOWN>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-red-sata0 {
+			label = "cumulus:red:sata0";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* USB 3.0 Bridge ASM1042A */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&sata_led_pin>;
+	pinctrl-names = "default";
+
+	sata_led_pin: sata-led-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "sata0";
+	};
+	gpio_led_pin: gpio-led-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/* MX25L8006E */
+		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
new file mode 100644
index 0000000000000..f0893cc066071
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Synology DS213j
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Synology DS213j";
+	compatible = "synology,ds213j", "marvell,armada370",
+		     "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+
+			/* RTC provided by Seiko S-35390A I2C RTC chip below */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <400000>;
+				status = "okay";
+
+				/* Main device RTC chip */
+				s35390a: s35390a@30 {
+					 compatible = "sii,s35390a";
+					 reg = <0x30>;
+				};
+			};
+
+			/* Connected to a header on device's PCB */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Connected to a TI MSP430F2111 for power control */
+			serial@12100 {
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			/* rear USB port, near reset button */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* rear USB port, near RJ45 port */
+			usb@51000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-fan-32-38 {
+		status = "okay";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
+			     &fan_ctrl_high_pin &fan_alarm_pin>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
+			 &gpio2  0 GPIO_ACTIVE_HIGH
+			 &gpio2  1 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       1000 1
+				       1150 2
+				       1350 4
+				       1500 3
+				       1650 5
+				       1750 6
+				       1900 7 >;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&disk1_led_pin
+			     &disk2_led_pin>;
+		pinctrl-names = "default";
+
+		disk1-led-amber {
+			label = "synology:amber:disk1";
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		disk2-led-amber {
+			label = "synology:amber:disk2";
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
+		pinctrl-names = "default";
+
+		sata1_regulator: sata1-regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata2_regulator: sata2-regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA2 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	disk1_led_pin: disk1-led-pin {
+		marvell,pins = "mpp31";
+		marvell,function = "gpio";
+	};
+
+	disk2_led_pin: disk2-led-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	sata1_pwr_pin: sata1-pwr-pin {
+		marvell,pins = "mpp37";
+		marvell,function = "gpio";
+	};
+
+	sata2_pwr_pin: sata2-pwr-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit0_pin: syno-id-bit0-pin {
+		marvell,pins = "mpp55";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit1_pin: syno-id-bit1-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit2_pin: syno-id-bit2-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit3_pin: syno-id-bit3-pin {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_low_pin: fan-ctrl-low-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_mid_pin: fan-ctrl-mid-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_high_pin: fan-ctrl-high-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+
+	fan_alarm_pin: fan-alarm-pin {
+		marvell,pins = "mpp38";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@0 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000c0000>; /* 768KB */
+		};
+
+		partition@c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000c0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@390000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x00390000 0x00440000>; /* 4250KB */
+		};
+
+		partition@7d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-xp.dtsi b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi
new file mode 100644
index 0000000000000..0b8c2a64b36f9
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 370 and Armada XP SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * This file contains the definitions that are common to the Armada
+ * 370 and Armada XP SoC.
+ */
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 370 and XP SoC";
+	compatible = "marvell,armada-370-xp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "marvell,sheeva-v7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&mpic>;
+		pcie-mem-aperture = <0xf8000000 0x7e00000>;
+		pcie-io-aperture  = <0xffe00000 0x100000>;
+
+		devbus_bootcs: devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs0: devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs1: devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs2: devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs3: devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			rtc: rtc@10300 {
+				compatible = "marvell,orion-rtc";
+				reg = <0x10300 0x20>;
+				interrupts = <50>;
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <31>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <32>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <41>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <42>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl: pin-ctrl@18000 {
+				reg = <0x18000 0x38>;
+			};
+
+			coredivclk: corediv-clock@18740 {
+				compatible = "marvell,armada-370-corediv-clock";
+				reg = <0x18740 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>,
+				      <0x20250 0x8>;
+			};
+
+			mpic: interrupt-controller@20a00 {
+				compatible = "marvell,mpic";
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+			};
+
+			coherencyfab: coherency-fabric@20200 {
+				compatible = "marvell,coherency-fabric";
+				reg = <0x20200 0xb0>, <0x21010 0x1c>;
+			};
+
+			timer: timer@20300 {
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
+			};
+
+			watchdog: watchdog@20300 {
+				reg = <0x20300 0x34>, <0x20704 0x4>;
+			};
+
+			cpurst: cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x8>;
+			};
+
+			pmsu: pmsu@22000 {
+				compatible = "marvell,armada-370-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			usb0: usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <45>;
+				status = "disabled";
+			};
+
+			usb1: usb@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x500>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			eth0: ethernet@70000 {
+				reg = <0x70000 0x4000>;
+				interrupts = <8>;
+				clocks = <&gateclk 4>;
+				status = "disabled";
+			};
+
+			mdio: mdio@72004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
+			};
+
+			eth1: ethernet@74000 {
+				reg = <0x74000 0x4000>;
+				interrupts = <10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+			};
+
+			sata: sata@a0000 {
+				compatible = "marvell,armada-370-sata";
+				reg = <0xa0000 0x5000>;
+				interrupts = <55>;
+				clocks = <&gateclk 15>, <&gateclk 30>;
+				clock-names = "0", "1";
+				status = "disabled";
+			};
+
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <113>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			sdio: mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <54>;
+				clocks = <&gateclk 17>;
+				bus-width = <4>;
+				cap-sdio-irq;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				status = "disabled";
+			};
+		};
+
+		spi0: spi@10600 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <30>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <92>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+	};
+ };
diff --git a/arch/arm/boot/dts/marvell/armada-370.dtsi b/arch/arm/boot/dts/marvell/armada-370.dtsi
new file mode 100644
index 0000000000000..2013a5ccecd31
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370.dtsi
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 370 family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada 370 SoC that are not
+ * common to all Armada SoCs.
+ */
+
+#include "armada-370-xp.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	model = "Marvell Armada 370 family SoC";
+	compatible = "marvell,armada370", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	soc {
+		compatible = "marvell,armada370-mbus", "simple-bus";
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+		};
+
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			L2: l2-cache@8000 {
+				compatible = "marvell,aurora-outer-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-level = <2>;
+				cache-unified;
+				wt-override;
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-370-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18230 {
+				compatible = "marvell,armada-370-core-clock";
+				reg = <0x18230 0x08>;
+				#clock-cells = <1>;
+			};
+
+			thermal: thermal@18300 {
+				compatible = "marvell,armada370-thermal";
+				reg = <0x18300 0x4
+					0x18304 0x4>;
+				status = "okay";
+			};
+
+			sscg: sscg@18330 {
+				reg = <0x18330 0x4>;
+			};
+
+			cpuconf: cpu-config@21000 {
+				compatible = "marvell,armada-370-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
+			audio_controller: audio-controller@30000 {
+				#sound-dai-cells = <1>;
+				compatible = "marvell,armada370-audio";
+				reg = <0x30000 0x4000>;
+				interrupts = <93>;
+				clocks = <&gateclk 0>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			xor0: xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60A00 0x100>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor1: xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-370-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <48>;
+				clocks = <&gateclk 23>;
+				clock-names = "cesa0";
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x7e0>;
+			};
+		};
+
+		crypto_sram: sa-sram {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x01) 0 0x800>;
+			reg-names = "sram";
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>;
+
+			/*
+			 * The Armada 370 has an erratum preventing the use of
+			 * the standard workflow for CPU idle support (relying
+			 * on the BootROM code to enter/exit idle state).
+			 * Reserve some amount of the crypto SRAM to put the
+			 * cpuidle workaround.
+			 */
+			idle-sram@0 {
+				reg = <0x0 0x20>;
+			};
+		};
+	};
+};
+
+/*
+ * Default UART pinctrl setting without RTS/CTS, can be overwritten on
+ * board level if a different configuration is used.
+ */
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c0 {
+	reg = <0x11000 0x20>;
+};
+
+&i2c1 {
+	reg = <0x11100 0x20>;
+};
+
+&mpic {
+	reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-370-timer";
+	clocks = <&coreclk 2>;
+};
+
+&watchdog {
+	compatible = "marvell,armada-370-wdt";
+	clocks = <&coreclk 2>;
+};
+
+&usb0 {
+	clocks = <&coreclk 0>;
+};
+
+&usb1 {
+	clocks = <&coreclk 0>;
+};
+
+&eth0 {
+	compatible = "marvell,armada-370-neta";
+};
+
+&eth1 {
+	compatible = "marvell,armada-370-neta";
+};
+
+&pinctrl {
+	compatible = "marvell,mv88f6710-pinctrl";
+
+	spi0_pins1: spi0-pins1 {
+		marvell,pins = "mpp33", "mpp34",
+			       "mpp35", "mpp36";
+		marvell,function = "spi0";
+	};
+
+	spi0_pins2: spi0_pins2 {
+		marvell,pins = "mpp32", "mpp63",
+			       "mpp64", "mpp65";
+		marvell,function = "spi0";
+	};
+
+	spi1_pins: spi1-pins {
+		marvell,pins = "mpp49", "mpp50",
+			       "mpp51", "mpp52";
+		marvell,function = "spi1";
+	};
+
+	uart0_pins: uart0-pins {
+		marvell,pins = "mpp0", "mpp1";
+		marvell,function = "uart0";
+	};
+
+	uart1_pins: uart1-pins {
+		marvell,pins = "mpp41", "mpp42";
+		marvell,function = "uart1";
+	};
+
+	sdio_pins1: sdio-pins1 {
+		marvell,pins = "mpp9",  "mpp11", "mpp12",
+				"mpp13", "mpp14", "mpp15";
+		marvell,function = "sd0";
+	};
+
+	sdio_pins2: sdio-pins2 {
+		marvell,pins = "mpp47", "mpp48", "mpp49",
+				"mpp50", "mpp51", "mpp52";
+		marvell,function = "sd0";
+	};
+
+	sdio_pins3: sdio-pins3 {
+		marvell,pins = "mpp48", "mpp49", "mpp50",
+				"mpp51", "mpp52", "mpp53";
+		marvell,function = "sd0";
+	};
+
+	i2c0_pins: i2c0-pins {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "i2c0";
+	};
+
+	i2s_pins1: i2s-pins1 {
+		marvell,pins = "mpp5", "mpp6", "mpp7",
+			       "mpp8", "mpp9", "mpp10",
+			       "mpp12", "mpp13";
+		marvell,function = "audio";
+	};
+
+	i2s_pins2: i2s-pins2 {
+		marvell,pins = "mpp49", "mpp47", "mpp50",
+			       "mpp59", "mpp57", "mpp61",
+			       "mpp62", "mpp60", "mpp58";
+		marvell,function = "audio";
+	};
+
+	mdio_pins: mdio-pins {
+		marvell,pins = "mpp17", "mpp18";
+		marvell,function = "ge";
+	};
+
+	ge0_rgmii_pins: ge0-rgmii-pins {
+		marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
+			       "mpp9", "mpp10", "mpp11", "mpp12",
+			       "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "ge0";
+	};
+
+	ge1_rgmii_pins: ge1-rgmii-pins {
+		marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
+			       "mpp23", "mpp24", "mpp25", "mpp26",
+			       "mpp27", "mpp28", "mpp29", "mpp30";
+		marvell,function = "ge1";
+	};
+};
+
+/*
+ * Default SPI pinctrl setting, can be overwritten on
+ * board level if a different configuration is used.
+ */
+&spi0 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins1>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-375-db.dts b/arch/arm/boot/dts/marvell/armada-375-db.dts
new file mode 100644
index 0000000000000..4c4092790a200
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-375-db.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 375 evaluation board
+ * (DB-88F6720)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-375.dtsi"
+
+/ {
+	model = "Marvell Armada 375 Development Board";
+	compatible = "marvell,a375-db", "marvell,armada375";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
+
+	};
+};
+&pciec {
+	status = "okay";
+};
+
+/*
+ * The two PCIe units are accessible through
+ * standard PCIe slots on the board.
+ */
+&pcie0 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 1, Lane 0 */
+	status = "okay";
+};
+
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+
+	/*
+	 * SPI conflicts with NAND, so we disable it here, and
+	 * select NAND as the enabled device by default.
+	 */
+
+	status = "disabled";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&pinctrl {
+	sdio_st_pins: sdio-st-pins {
+		marvell,pins = "mpp44", "mpp45";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&sdio {
+	pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&ethernet {
+	status = "okay";
+};
+
+
+&eth0 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&eth1 {
+	status = "okay";
+	phy = <&phy3>;
+	phy-mode = "gmii";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-375.dtsi b/arch/arm/boot/dts/marvell/armada-375.dtsi
new file mode 100644
index 0000000000000..ddc49547d7867
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-375.dtsi
@@ -0,0 +1,645 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 375 family SoC
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	model = "Marvell Armada 375 family SoC";
+	compatible = "marvell,armada375";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	clocks {
+		/* 1 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000000>;
+		};
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-375-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
+	soc {
+		compatible = "marvell,armada375-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		devbus_bootcs: devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs0: devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs1: devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs2: devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs3: devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+				arm,double-linefill-incr = <0>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <0>;
+				prefetch-data = <1>;
+			};
+
+			scu: scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer0: timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			mdio: mdio@c0054 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0xc0054 0x4>;
+				clocks = <&gateclk 19>;
+			};
+
+			/* Network controller */
+			ethernet: ethernet@f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,armada-375-pp2";
+				reg = <0xf0000 0xa000>, /* Packet Processor regs */
+				      <0xc0000 0x3060>, /* LMS regs */
+				      <0xc4000 0x100>,  /* eth0 regs */
+				      <0xc5000 0x100>;  /* eth1 regs */
+				clocks = <&gateclk 3>, <&gateclk 19>;
+				clock-names = "pp_clk", "gop_clk";
+				status = "disabled";
+
+				eth0: ethernet-port@0 {
+					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+					reg = <0>;
+					port-id = <0>; /* For backward compatibility. */
+					status = "disabled";
+				};
+
+				eth1: ethernet-port@1 {
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					reg = <1>;
+					port-id = <1>; /* For backward compatibility. */
+					status = "disabled";
+				};
+			};
+
+			rtc: rtc@10300 {
+				compatible = "marvell,orion-rtc";
+				reg = <0x10300 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,armada-375-spi",
+						"marvell,orion-spi";
+				reg = <0x10600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,armada-375-spi",
+						"marvell,orion-spi";
+				reg = <0x10680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@18000 {
+				compatible = "marvell,mv88f6720-pinctrl";
+				reg = <0x18000 0x24>;
+
+				i2c0_pins: i2c0-pins {
+					marvell,pins = "mpp14",  "mpp15";
+					marvell,function = "i2c0";
+				};
+
+				i2c1_pins: i2c1-pins {
+					marvell,pins = "mpp61",  "mpp62";
+					marvell,function = "i2c1";
+				};
+
+				nand_pins: nand-pins {
+					marvell,pins = "mpp0", "mpp1", "mpp2",
+						"mpp3", "mpp4", "mpp5",
+						"mpp6", "mpp7", "mpp8",
+						"mpp9", "mpp10", "mpp11",
+						"mpp12", "mpp13";
+					marvell,function = "nand";
+				};
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp24",  "mpp25", "mpp26",
+						     "mpp27", "mpp28", "mpp29";
+					marvell,function = "sd";
+				};
+
+				spi0_pins: spi0-pins {
+					marvell,pins = "mpp0",  "mpp1", "mpp4",
+						     "mpp5", "mpp8", "mpp9";
+					marvell,function = "spi0";
+				};
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-375-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-375-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			usbcluster: usb-cluster@18400 {
+				compatible = "marvell,armada-375-usb-cluster";
+				reg = <0x18400 0x4>;
+				#phy-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			mpic: interrupt-controller@20a00 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer1: timer@20300 {
+				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 0>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog: watchdog@20300 {
+				compatible = "marvell,armada-375-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
+				clocks = <&coreclk 0>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst: cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			coherencyfab: coherency-fabric@21010 {
+				compatible = "marvell,armada-375-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			usb0: usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				phys = <&usbcluster PHY_TYPE_USB2>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			usb1: usb@54000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x54000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			usb2: usb@58000 {
+				compatible = "marvell,armada-375-xhci";
+				reg = <0x58000 0x20000>,<0x5b880 0x80>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 16>;
+				phys = <&usbcluster PHY_TYPE_USB3>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			xor0: xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60A00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor1: xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 23>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-375-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>, <&gateclk 31>,
+					 <&gateclk 28>, <&gateclk 29>;
+				clock-names = "cesa0", "cesa1",
+					      "cesaz0", "cesaz1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			sata: sata@a0000 {
+				compatible = "marvell,armada-370-sata";
+				reg = <0xa0000 0x5000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 14>, <&gateclk 20>;
+				clock-names = "0", "1";
+				status = "disabled";
+			};
+
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			sdio: mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 17>;
+				bus-width = <4>;
+				cap-sdio-irq;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				status = "disabled";
+			};
+
+			thermal: thermal@e8078 {
+				compatible = "marvell,armada375-thermal";
+				reg = <0xe8078 0x4>, <0xe807c 0x8>;
+				status = "okay";
+			};
+
+			coreclk: mvebu-sar@e8204 {
+				compatible = "marvell,armada-375-core-clock";
+				reg = <0xe8204 0x04>;
+				#clock-cells = <1>;
+			};
+
+			coredivclk: corediv-clock@e8250 {
+				compatible = "marvell,armada-375-corediv-clock";
+				reg = <0xe8250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+		};
+
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie1: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+			clocks = <&gateclk 30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+			clocks = <&gateclk 31>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-380.dtsi b/arch/arm/boot/dts/marvell/armada-380.dtsi
new file mode 100644
index 0000000000000..e94f22b0e9b5e
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-380.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 380 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 380 family SoC";
+	compatible = "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6810-pinctrl";
+			};
+		};
+
+		pcie {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
+
+			/* x1 port */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
new file mode 100644
index 0000000000000..f4c4b213ef4ed
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2021, Marcel Ziswiler <marcel@ziswiler.com> */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear GS110EMX";
+	compatible = "netgear,gs110emx", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&front_button_pins>;
+		pinctrl-names = "default";
+
+		key-factory-default {
+			label = "Factory Default";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>; /* 128 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			rtc@a3800 {
+				/*
+				 * If the rtc doesn't work, run "date reset"
+				 * twice in u-boot.
+				 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	fixed-link {
+		full-duplex;
+		pause;
+		speed = <1000>;
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6190";
+		#address-cells = <1>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&switch_interrupt_pins>;
+		pinctrl-names = "default";
+		#size-cells = <0>;
+		reg = <0>;
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: switch0phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: switch0phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: switch0phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: switch0phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: switch0phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: switch0phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: switch0phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy8: switch0phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		mdio-external {
+			compatible = "marvell,mv88e6xxx-mdio-external";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy1: ethernet-phy@b {
+				reg = <0xb>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+
+			phy2: ethernet-phy@c {
+				reg = <0xc>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				ethernet = <&eth0>;
+				phy-mode = "rgmii";
+				reg = <0>;
+
+				fixed-link {
+					full-duplex;
+					pause;
+					speed = <1000>;
+				};
+			};
+
+			port@1 {
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+				reg = <1>;
+			};
+
+			port@2 {
+				label = "lan2";
+				phy-handle = <&switch0phy2>;
+				reg = <2>;
+			};
+
+			port@3 {
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+				reg = <3>;
+			};
+
+			port@4 {
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+				reg = <4>;
+			};
+
+			port@5 {
+				label = "lan5";
+				phy-handle = <&switch0phy5>;
+				reg = <5>;
+			};
+
+			port@6 {
+				label = "lan6";
+				phy-handle = <&switch0phy6>;
+				reg = <6>;
+			};
+
+			port@7 {
+				label = "lan7";
+				phy-handle = <&switch0phy7>;
+				reg = <7>;
+			};
+
+			port@8 {
+				label = "lan8";
+				phy-handle = <&switch0phy8>;
+				reg = <8>;
+			};
+
+			port@9 {
+				/* 88X3310P external phy */
+				label = "lan9";
+				phy-handle = <&phy1>;
+				phy-mode = "xaui";
+				reg = <9>;
+			};
+
+			port@a {
+				/* 88X3310P external phy */
+				label = "lan10";
+				phy-handle = <&phy2>;
+				phy-mode = "xaui";
+				reg = <0xa>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	front_button_pins: front-button-pins {
+		marvell,pins = "mpp38";
+		marvell,function = "gpio";
+	};
+
+	switch_interrupt_pins: switch-interrupt-pins {
+		marvell,pins = "mpp39";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot";
+				read-only;
+				reg = <0x00000000 0x00100000>;
+			};
+
+			partition@100000 {
+				label = "env";
+				reg = <0x00100000 0x00010000>;
+			};
+
+			partition@200000 {
+				label = "rsv";
+				reg = <0x00110000 0x00010000>;
+			};
+
+			partition@300000 {
+				label = "image0";
+				reg = <0x00120000 0x00900000>;
+			};
+
+			partition@400000 {
+				label = "config";
+				reg = <0x00a20000 0x00300000>;
+			};
+
+			partition@480000 {
+				label = "debug";
+				reg = <0x00d20000 0x002e0000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-382-rd-ac3x-48g4x2xl.dts b/arch/arm/boot/dts/marvell/armada-382-rd-ac3x-48g4x2xl.dts
new file mode 100644
index 0000000000000..584f0d0398a51
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-382-rd-ac3x-48g4x2xl.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 382 reference board
+ * (RD-AC3X-48G4X2XL)
+ *
+ * Copyright (C) 2020 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 382 RD-AC3X";
+	compatible = "marvell,rd-ac3x-48g4x2xl", "marvell,rd-ac3x",
+			 "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &eth1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	eeprom@53{
+		compatible = "atmel,24c64";
+		reg = <0x53>;
+	};
+
+	/* CPLD device present at 0x3c. Function unknown */
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x00500000>;
+				label = "u-boot";
+			};
+			partition@500000{
+				reg = <0x00500000 0x00400000>;
+				label = "u-boot env";
+			};
+			partition@900000{
+				reg = <0x00900000 0x3F700000>;
+				label = "user";
+			};
+		};
+	};
+};
+
+&refclk {
+	clock-frequency = <200000000>;
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts
new file mode 100644
index 0000000000000..5a9ab8410b7b6
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Armada 385 Allied Telesis x530/GS980MX Board.
+ (x530/AT-GS980MX)
+ *
+ Copyright (C) 2020 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "x530/AT-GS980MX";
+	compatible = "alliedtelesis,gs980mx", "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c0: i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+			};
+
+			uart0: serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+	reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <400000>;
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&devbus_cs1 {
+	compatible = "marvell,mvebu-devbus";
+	status = "okay";
+
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+
+	nvs@0 {
+		status = "okay";
+
+		compatible = "mtd-ram";
+		reg = <0 0x00080000>;
+		bank-width = <1>;
+		label = "nvs";
+	};
+};
+
+&pinctrl {
+	i2c0_gpio_pins: i2c-gpio-pins-0 {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "gpio";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-1 = <&i2c0_gpio_pins>;
+	scl-gpio = <&gpio0 2 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	sda-gpio = <&gpio0 3 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+	i2c0mux: mux@71 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,pca9544";
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 { /* POE devices MUX */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adt7476_2e: hwmon@2e {
+				compatible = "adi,adt7476";
+				reg = <0x2e>;
+			};
+
+			adt7476_2d: hwmon@2d {
+				compatible = "adi,adt7476";
+				reg = <0x2d>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			rtc@68 {
+				compatible = "dallas,ds1340";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			gpio@20 {
+				compatible = "nxp,pca9554";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x20>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <1>; /* Chip select 1 */
+		spi-max-frequency = <54000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x00100000>;
+				label = "u-boot";
+			};
+			partition@100000 {
+				reg = <0x00100000 0x00040000>;
+				label = "u-boot-env";
+			};
+			partition@140000 {
+				reg = <0x00140000 0x00e80000>;
+				label = "unused";
+			};
+			partition@fc0000 {
+				reg = <0x00fc0000 0x00040000>;
+				label = "idprom";
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		marvell,nand-enable-arbiter;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x0f000000>;
+				label = "user";
+			};
+			partition@f000000 {
+				/* Maximum mtdoops size is 8MB, so set to that. */
+				reg = <0x0f000000 0x00800000>;
+				label = "errlog";
+			};
+			partition@f800000 {
+				reg = <0x0f800000 0x00800000>;
+				label = "nand-bbt";
+			};
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
new file mode 100644
index 0000000000000..1990f7d0cc79a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR L8";
+};
+
+&mdio {
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6190";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan8";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan6";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "lan3";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "lan2";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "lan1";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@10 {
+				reg = <10>;
+				phy-mode = "2500base-x";
+
+				ethernet = <&eth1>;
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy1: switch0phy1@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy2: switch0phy2@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy3: switch0phy3@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy4: switch0phy4@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy5: switch0phy5@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy6: switch0phy6@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy7: switch0phy7@8 {
+				reg = <0x8>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
new file mode 100644
index 0000000000000..b795ad573891e
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR S4";
+};
+
+&sfp0 {
+	tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "2500base-x";
+				ethernet = <&eth1>;
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy3: switch0phy3@14 {
+				reg = <0x14>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
new file mode 100644
index 0000000000000..d1452a04e9040
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Clearfog GTR machines rev 1.0 (88F6825)
+ *
+ *  Rabeeh Khoury <rabeeh@solid-run.com>, based on Russell King clearfog work
+ */
+
+/*
+	SERDES mapping -
+	0. SATA1 on CON18, or optionally mini PCIe CON3 - PCIe0
+	1. 6141 switch (2.5Gbps capable)
+	2. SATA0 on CON17, or optionally mini PCIe CON4 - PCIe1
+	3. USB 3.0 Host
+	4. mini PCIe CON2 - PCIe2
+	5. SFP connector, or optionally SGMII Ethernet 1512 PHY
+
+	USB 2.0 mapping -
+	0. USB 2.0 - 0 USB pins header CON12
+	1. USB 2.0 - 1 mini PCIe CON2
+	2. USB 2.0 - 2 to USB 3.0 connector (used with SERDES #3)
+
+	Pin mapping -
+	0,1 - console UART
+	2,3 - I2C0 - connected to I2C EEPROM, two temperature sensors,
+	      front panel and PSE controller
+	4,5 - MDC/MDIO
+	6..17 - RGMII
+	18 - Topaz switch reset (active low)
+	19 - 1512 phy reset
+	20 - 1512 phy reset (eth2, optional)
+	21,28,37,38,39,40 - SD0
+	22 - USB 3.0 current limiter enable (active high)
+	24 - SFP TX fault (input active high)
+	25 - SFP present (input active low)
+	26,27 - I2C1 - connected to SFP
+	29 - Fan PWM
+	30 - CON4 mini PCIe wifi disable
+	31 - CON3 mini PCIe wifi disable
+	32 - Fuse programming power toggle (1.8v)
+	33 - CON4 mini PCIe reset
+	34 - CON2 mini PCIe wifi disable
+	35 - CON3 mini PCIe reset
+	36 - Rear button (GPIO active low)
+	41 - CON1 front panel connector
+	42 - Front LED1, or front panel CON1
+	43 - Micron L-PBGA 24 ball SPI (1Gb) CS, or TPM SPI CS
+	44 - CON2 mini PCIe reset
+	45 - TPM PIRQ signal, or front panel CON1
+	46 - SFP TX disable
+	47 - Control isolation of boot sensitive SAR signals
+	48 - PSE reset
+	49 - PSE OSS signal
+	50 - PSE interrupt
+	52 - Front LED2, or front panel
+	53 - Front button
+	54 - SFP LOS (input active high)
+	55 - Fan sense
+	56(mosi),57(clk),58(miso) - SPI interface - 32Mb SPI, 1Gb SPI and TPM
+	59 - SPI 32Mb W25Q32BVZPIG CS0 chip select (bootable)
+*/
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	v_usb3_con: regulator-v-usb3-con {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_usb3_con_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb3_con";
+		vin-supply = <&reg_5p0v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+
+			rtc@a3800 {
+				status = "okay";
+			};
+
+			i2c@11000 { /* ROM, temp sensor and front panel */
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			i2c@11100 { /* SFP (CON5/CON6) */
+				pinctrl-0 = <&cf_gtr_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
+					marvell,pins = "mpp22";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
+					marvell,pins = "mpp23";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_i2c1_pins: i2c1-pins {
+					/* SFP */
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+
+				cf_gtr_sdhci_pins: cf-gtr-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+
+				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
+					marvell,pins = "mpp48";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp59";
+					marvell,function = "spi1";
+				};
+
+				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
+					marvell,pins = "mpp53";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
+					marvell,pins = "mpp36";
+					marvell,function = "gpio";
+				};
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				no-1-8-v;
+				non-removable;
+				pinctrl-0 = <&cf_gtr_sdhci_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				vbus-supply = <&v_usb3_con>;
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			pcie@1,0 {
+				reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	sfp0: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			label = "Rear Button";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+
+		button-1 {
+			label = "Front Button";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			function = LED_FUNCTION_CPU;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	phy = <&phy_dedicated>;
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	status = "okay";
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	bm,pool-long = <2>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phys = <&comphy1 1>;
+	phy-mode = "2500base-x";
+	status = "okay";
+
+	fixed-link {
+		speed = <2500>;
+		full-duplex;
+	};
+};
+
+&eth2 {
+	/* ethernet@34000 */
+	bm,pool-long = <3>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	managed = "in-band-status";
+	phys = <&comphy5 1>;
+	phy-mode = "sgmii";
+	sfp = <&sfp0>;
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy_dedicated: ethernet-phy@0 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x1017>;
+		reg = <0>;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi1 {
+	/*
+	 * CS0: W25Q32 flash
+	 */
+	pinctrl-0 = <&spi1_pins &cf_gtr_spi1_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* U26 temperature sensor placed near SoC */
+	temp1: nct75@4c {
+		compatible = "lm75";
+		reg = <0x4c>;
+	};
+
+	/* U27 temperature sensor placed near RTC battery */
+	temp2: nct75@4d {
+		compatible = "lm75";
+		reg = <0x4d>;
+	};
+
+	/* 2Kb eeprom */
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+	};
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&cf_gtr_fan_pwm>;
+	pinctrl-names = "default";
+
+	wifi-disable {
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "wifi-disable";
+	};
+};
+
+&gpio1 {
+	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>;
+	pinctrl-names = "default";
+
+	lte-disable {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "lte-disable";
+	};
+
+	/*
+	 * This signal, when asserted, isolates Armada 38x sample at reset pins
+	 * from control of external devices. Should be de-asserted after reset.
+	 */
+	sar-isolation {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "sar-isolation";
+	};
+
+	poe-reset {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "poe-reset";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/marvell/armada-385-db-88f6820-amc.dts
new file mode 100644
index 0000000000000..389d9c75d546a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-db-88f6820-amc.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 AMC board
+ * (DB-88F6820-AMC)
+ *
+ * Copyright (C) 2017 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 AMC";
+	compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		spi1 = &spi1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	/*
+	 * Exported on the micro USB connector CON3
+	 * through an FTDI
+	 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+
+&eth0 {
+	pinctrl-names = "default";
+	/*
+	 * The Reference Clock 0 is used to provide a
+	 * clock to the PHY
+	 */
+	pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "sgmii";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x40000000>;
+				label = "user";
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x00100000>;
+				label = "u-boot";
+			};
+			partition@100000 {
+				reg = <0x00100000 0x00040000>;
+				label = "u-boot-env";
+			};
+		};
+	};
+};
+
+&refclk {
+	clock-frequency = <20000000>;
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-db-ap.dts b/arch/arm/boot/dts/marvell/armada-385-db-ap.dts
new file mode 100644
index 0000000000000..332f8fce77dc2
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-db-ap.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 Access Point Development board
+ * (DB-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Nadav Haklai <nadavh@marvell.com>
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 Access Point Development Board";
+	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c0: i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+
+				/*
+				 * This bus is wired to two EEPROM
+				 * sockets, one of which holding the
+				 * board ID used by the	bootloader.
+				 * Erasing this EEPROM's content will
+				 * brick the board.
+				 * Use this bus with caution.
+				 */
+			};
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy1: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy2: ethernet-phy@6 {
+					reg = <6>;
+				};
+			};
+
+			/* UART0 is exposed through the JP8 connector */
+			uart0: serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			/*
+			 * UART1 is exposed through a FTDI chip
+			 * wired to the mini-USB connector
+			 */
+			uart1: serial@12100 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins>;
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				xhci0_vbus_pins: xhci0-vbus-pins {
+					marvell,pins = "mpp44";
+					marvell,function = "gpio";
+				};
+			};
+
+			/* CON3 */
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+				bm,pool-short = <3>;
+			};
+
+			/* CON2 */
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON4 */
+			ethernet@70000 {
+				pinctrl-names = "default";
+
+				/*
+				 * The Reference Clock 0 is used to
+				 * provide a clock to the PHY
+				 */
+				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <3>;
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+				usb-phy = <&usb3_phy>;
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		pcie {
+			status = "okay";
+
+			/*
+			 * The three PCIe units are accessible through
+			 * standard mini-PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+
+	usb3_phy: usb3_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_xhci0_vbus>;
+		#phy-cells = <0>;
+	};
+
+	reg_xhci0_vbus: xhci0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci0_vbus_pins>;
+		regulator-name = "xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <54000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x00000000 0x00800000>;
+				read-only;
+			};
+
+			partition@800000 {
+				label = "uImage";
+				reg = <0x00800000 0x00400000>;
+				read-only;
+			};
+
+			partition@c00000 {
+				label = "Root";
+				reg = <0x00c00000 0x3f400000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts
new file mode 100644
index 0000000000000..88b2921fed55b
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree include for the Linksys WRT1200AC (Caiman)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1200AC";
+	compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "caiman:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "caiman:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "caiman:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "caiman:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "caiman:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "caiman:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "caiman:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "caiman:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "caiman:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	led-power {
+		label = "caiman:white:power";
+	};
+
+	led-sata {
+		label = "caiman:white:sata";
+	};
+};
+
+&nand {
+	/* 128MiB */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u_env";
+			reg = <0x200000 0x40000>;    /* 256KiB */
+		};
+
+		partition@140000 {
+			label = "s_env";
+			reg = <0x240000 0x40000>;    /* 256KiB */
+		};
+
+		partition@900000 {
+			label = "devinfo";
+			reg = <0x900000 0x100000>;   /* 1MiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x2800000>;  /* 40MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x2200000>;  /* 34MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@3200000 {
+			label = "kernel2";
+			reg = <0x3200000 0x2800000>; /* 40MiB */
+		};
+
+		partition@3800000 {
+			label = "rootfs2";
+			reg = <0x3800000 0x2200000>; /* 34MiB */
+		};
+
+		/*
+		 * 38MiB, last MiB is for the BBT, not writable
+		 */
+		partition@5a00000 {
+			label = "syscfg";
+			reg = <0x5a00000 0x2600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x280000 0x680000>;   /* 6.5MiB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts
new file mode 100644
index 0000000000000..88200f930d0d8
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT1900ACv2 (Cobra)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1900ACv2";
+	compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "cobra:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "cobra:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "cobra:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "cobra:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "cobra:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "cobra:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "cobra:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "cobra:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "cobra:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	led-power {
+		label = "cobra:white:power";
+	};
+
+	led-sata {
+		label = "cobra:white:sata";
+	};
+};
+
+&nand {
+	/* 128MiB */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u_env";
+			reg = <0x200000 0x40000>;    /* 256KiB */
+		};
+
+		partition@140000 {
+			label = "s_env";
+			reg = <0x240000 0x40000>;    /* 256KiB */
+		};
+
+		partition@900000 {
+			label = "devinfo";
+			reg = <0x900000 0x100000>;   /* 1MiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x2800000>;  /* 40MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x2200000>;  /* 34MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@3200000 {
+			label = "kernel2";
+			reg = <0x3200000 0x2800000>; /* 40MiB */
+		};
+
+		partition@3800000 {
+			label = "rootfs2";
+			reg = <0x3800000 0x2200000>; /* 34MiB */
+		};
+
+		/*
+		 * 38MiB, last MiB is for the BBT, not writable
+		 */
+		partition@5a00000 {
+			label = "syscfg";
+			reg = <0x5a00000 0x2600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x280000 0x680000>;   /* 6.5MiB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts
new file mode 100644
index 0000000000000..4ab45f294de22
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT3200ACM (Rango)
+ *
+ * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT3200ACM";
+	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "rango:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "rango:white:wan";
+		reg = <0x1>;
+	};
+
+	usb2@5 {
+		label = "rango:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "rango:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "rango:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "rango:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "rango:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	led-power {
+		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		label = "rango:white:power";
+	};
+
+	led-sata {
+		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		label = "rango:white:sata";
+	};
+
+	led-wlan_2g {
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		label = "rango:white:wlan_2g";
+	};
+
+	led-wlan_5g {
+		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		label = "rango:white:wlan_5g";
+	};
+};
+
+&gpio_leds_pins {
+	marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
+};
+
+&nand {
+	/* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u_env";
+			reg = <0x200000 0x20000>;    /* 128KiB */
+		};
+
+		partition@220000 {
+			label = "s_env";
+			reg = <0x220000 0x40000>;    /* 256KiB */
+		};
+
+		partition@7e0000 {
+			label = "devinfo";
+			reg = <0x7e0000 0x40000>;   /* 256KiB */
+			read-only;
+		};
+
+		partition@820000 {
+			label = "sysdiag";
+			reg = <0x820000 0x1e0000>;   /* 1920KiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x5000000>;  /* 80MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x4a00000>;  /* 74MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@5a00000 {
+			label = "kernel2";
+			reg = <0x5a00000 0x5000000>; /* 80MiB */
+		};
+
+		partition@6000000 {
+			label = "rootfs2";
+			reg = <0x6000000 0x4a00000>; /* 74MiB */
+		};
+
+		/*
+		 * 86MiB, last MiB is for the BBT, not writable
+		 */
+		partition@aa00000 {
+			label = "syscfg";
+			reg = <0xaa00000 0x5600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x260000 0x5c0000>;   /* 5.75MiB */
+		};
+	};
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhci_pins>;
+	no-1-8-v;
+	non-removable;
+	wp-inverted;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&usb3_1_vbus {
+	gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_1_vbus_pins {
+	marvell,pins = "mpp44";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts
new file mode 100644
index 0000000000000..f1b1f22413f1b
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT1900ACS (Shelby)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1900ACS";
+	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "shelby:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "shelby:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "shelby:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "shelby:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "shelby:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "shelby:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "shelby:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "shelby:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "shelby:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	led-power {
+		label = "shelby:white:power";
+	};
+
+	led-sata {
+		label = "shelby:white:sata";
+	};
+};
+
+&nand {
+	/* 128MiB */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u_env";
+			reg = <0x200000 0x40000>;    /* 256KiB */
+		};
+
+		partition@140000 {
+			label = "s_env";
+			reg = <0x240000 0x40000>;    /* 256KiB */
+		};
+
+		partition@900000 {
+			label = "devinfo";
+			reg = <0x900000 0x100000>;   /* 1MiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x2800000>;  /* 40MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x2200000>;  /* 34MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@3200000 {
+			label = "kernel2";
+			reg = <0x3200000 0x2800000>; /* 40MiB */
+		};
+
+		partition@3800000 {
+			label = "rootfs2";
+			reg = <0x3800000 0x2200000>; /* 34MiB */
+		};
+
+		/*
+		 * 38MiB, last MiB is for the BBT, not writable
+		 */
+		partition@5a00000 {
+			label = "syscfg";
+			reg = <0x5a00000 0x2600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x280000 0x680000>;   /* 6.5MiB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
new file mode 100644
index 0000000000000..fc8216fd9f600
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree include file for Armada 385 based Linksys boards
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Linksys boards based on Armada 385";
+	compatible = "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MiB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+	};
+
+	usb3_1_phy: usb3_1-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&usb3_1_vbus>;
+		#phy-cells = <0>;
+	};
+
+	usb3_1_vbus: usb3_1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_1_vbus_pins>;
+		regulator-name = "usb3_1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_pins>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Factory Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_pins>;
+		pinctrl-names = "default";
+
+		led-power {
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-sata {
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <2>;
+	bm,pool-short = <3>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	expander0: pca9635@68 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,pca9635";
+		reg = <0x68>;
+	};
+};
+
+&nand_controller {
+	/* 128MiB or 256MiB */
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nand: nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan3";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "sgmii";
+				ethernet = <&eth2>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Marvell 88W8864, 5GHz-only */
+	status = "okay";
+};
+
+&pcie2 {
+	/* Marvell 88W8864, 2GHz-only */
+	status = "okay";
+};
+
+&pinctrl {
+	gpio_keys_pins: gpio-keys-pins {
+		/* mpp24: wps, mpp29: reset */
+		marvell,pins = "mpp24", "mpp29";
+		marvell,function = "gpio";
+	};
+
+	gpio_leds_pins: gpio-leds-pins {
+		/* mpp54: sata, mpp55: power */
+		marvell,pins = "mpp54", "mpp55";
+		marvell,function = "gpio";
+	};
+
+	usb3_1_vbus_pins: usb3_1-vbus-pins {
+		marvell,pins = "mpp50";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "disabled";
+};
+
+&uart0 {
+	/* J10: VCC, NC, RX, NC, TX, GND  */
+	status = "okay";
+};
+
+&usb0 {
+	/* USB part of the eSATA/USB 2.0 port */
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+	usb-phy = <&usb3_1_phy>;
+};
+
+&rtc {
+	/* No crystal connected to the internal RTC */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
new file mode 100644
index 0000000000000..ea91ff964d94e
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Synology DS116 NAS
+ *
+ * Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Synology DS116";
+	compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			serial@12100 {
+				/* A PIC16F1829 is connected to uart1 at 9600 bps,
+				 * and takes single-character orders :
+				 *   "1" : power off // already handled by the poweroff node
+				 *   "2" : short beep
+				 *   "3" : long beep
+				 *   "4" : turn the power LED ON
+				 *   "5" : flash the power LED
+				 *   "6" : turn the power LED OFF
+				 *   "7" : turn the status LED OFF
+				 *   "8" : turn the status LED ON
+				 *   "9" : flash the status LED
+				 *   "A" : flash the motherboard LED (D8)
+				 *   "B" : turn the motherboard LED OFF
+				 *   "C" : hard reset
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins>;
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			ethernet@70000 {
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				status = "okay";
+			};
+
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata0_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata0>;
+				};
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				usb-phy = <&usb3_0_phy>;
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				usb-phy = <&usb3_1_phy>;
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		gpio-fan {
+			compatible = "gpio-fan";
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
+				<&gpio1 17 GPIO_ACTIVE_HIGH>,
+				<&gpio1 16 GPIO_ACTIVE_HIGH>;
+			gpio-fan,speed-map = <   0 0
+					      1500 1
+					      2500 2
+					      3000 3
+					      3400 4
+					      3700 5
+					      3900 6
+					      4000 7>;
+			#cooling-cells = <2>;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			/* The green part is on gpio0.20 which is also used by
+			 * sata0, and accesses to SATA disk 0 make it blink so it
+			 * doesn't need to be declared here.
+			 */
+			led-orange {
+				gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+				label = "ds116:orange:disk";
+				default-state = "off";
+			};
+		};
+	};
+
+	usb3_0_phy: usb3_0_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_0_vbus>;
+		#phy-cells = <0>;
+	};
+
+	usb3_1_phy: usb3_1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_1_vbus>;
+		#phy-cells = <0>;
+	};
+
+	reg_usb3_0_vbus: usb3-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci0_vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb3_1_vbus: usb3-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci1_vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sata0: pwr-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata0: v5-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_12v_sata0: v12-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_sata0>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25l6405d", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		/* Note: there is a redboot partition table despite u-boot
+		 * being used. The names presented here are the same as those
+		 * found in the FIS directory. There is also a small device
+		 * tree in the last 64kB of the RedBoot partition which is not
+		 * enumerated. The MAC address and the serial number are listed
+		 * in the "vendor" partition.
+		 */
+		partition@0 {
+			label = "RedBoot";
+			reg = <0x00000000 0x000f0000>;
+			read-only;
+		};
+
+		partition@c0000 {
+			label = "zImage";
+			reg = <0x000f0000 0x002d0000>;
+		};
+
+		partition@390000 {
+			label = "rd.gz";
+			reg = <0x003c0000 0x00410000>;
+		};
+
+		partition@7d0000 {
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>;
+			read-only;
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>;
+			read-only;
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>;
+			read-only;
+		};
+	};
+};
+
+&pinctrl {
+	/* use only one pin for UART1, as mpp20 is used by sata0 */
+	uart1_pins: uart-pins-1 {
+		marvell,pins = "mpp19";
+		marvell,function = "ua1";
+	};
+
+	xhci0_vbus_pins: xhci0_vbus_pins {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+	xhci1_vbus_pins: xhci1_vbus_pins {
+		marvell,pins = "mpp59";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
new file mode 100644
index 0000000000000..2d8d319bec830
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -0,0 +1,571 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Turris Omnia
+ *
+ * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
+ * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
+ *
+ * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Turris Omnia";
+	compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+
+			/* USB part of the PCIe2/USB 2.0 port */
+			usb@58000 {
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				status = "okay";
+
+				bus-width = <8>;
+				no-1-8-v;
+				non-removable;
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
+			};
+
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
+			};
+		};
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_i2c>;
+		tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <3000>;
+
+		/*
+		 * For now this has to be enabled at boot time by U-Boot when
+		 * a SFP module is present. Read more in the comment in the
+		 * eth2 node below.
+		 */
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio_controller 1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&audio_controller {
+	/* Pin header U16, GPIO51 in SPDIFO mode */
+	pinctrl-0 = <&spdif_pins>;
+	pinctrl-names = "default";
+	spdif-mode;
+	status = "okay";
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+/* Connected to 88E6176 switch, port 6 */
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <3>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* Connected to 88E6176 switch, port 5 */
+&eth1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <1>;
+	bm,pool-short = <3>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* WAN port */
+&eth2 {
+	/*
+	 * eth2 is connected via a multiplexor to both the SFP cage and to
+	 * ethernet-phy@1. The multiplexor switches the signal to SFP cage when
+	 * a SFP module is present, as determined by the mode-def0 GPIO.
+	 *
+	 * Until kernel supports this configuration properly, in case SFP module
+	 * is present, U-Boot has to enable the sfp node above, remove phy
+	 * handle and add managed = "in-band-status" property.
+	 */
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&phy1>;
+	phys = <&comphy5 2>;
+	sfp = <&sfp>;
+	buffer-manager = <&bm>;
+	bm,pool-long = <2>;
+	bm,pool-short = <3>;
+	label = "wan";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	i2cmux@70 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			/* STM32F0 command interface at address 0x2a */
+
+			led-controller@2b {
+				compatible = "cznic,turris-omnia-leds";
+				reg = <0x2b>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				/*
+				 * LEDs are controlled by MCU (STM32F0) at
+				 * address 0x2b.
+				 *
+				 * LED functions are not stable yet:
+				 * - there are 3 LEDs connected via MCU to PCIe
+				 *   ports. One of these ports supports mSATA.
+				 *   There is no mSATA nor PCIe function.
+				 *   For now we use LED_FUNCTION_WLAN, since
+				 *   in most cases users have wifi cards in
+				 *   these slots
+				 * - there are 2 LEDs dedicated for user: A and
+				 *   B. Again there is no such function defined.
+				 *   For now we use LED_FUNCTION_INDICATOR
+				 */
+
+				multi-led@0 {
+					reg = <0x0>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_INDICATOR;
+					function-enumerator = <2>;
+				};
+
+				multi-led@1 {
+					reg = <0x1>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_INDICATOR;
+					function-enumerator = <1>;
+				};
+
+				multi-led@2 {
+					reg = <0x2>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WLAN;
+					function-enumerator = <3>;
+				};
+
+				multi-led@3 {
+					reg = <0x3>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WLAN;
+					function-enumerator = <2>;
+				};
+
+				multi-led@4 {
+					reg = <0x4>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WLAN;
+					function-enumerator = <1>;
+				};
+
+				multi-led@5 {
+					reg = <0x5>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WAN;
+				};
+
+				multi-led@6 {
+					reg = <0x6>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <4>;
+				};
+
+				multi-led@7 {
+					reg = <0x7>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <3>;
+				};
+
+				multi-led@8 {
+					reg = <0x8>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <2>;
+				};
+
+				multi-led@9 {
+					reg = <0x9>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <1>;
+				};
+
+				multi-led@a {
+					reg = <0xa>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <0>;
+				};
+
+				multi-led@b {
+					reg = <0xb>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_POWER;
+				};
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+
+				/* The EEPROM contains data for bootloader.
+				 * Contents:
+				 * 	struct omnia_eeprom {
+				 * 		u32 magic; (=0x0341a034 in LE)
+				 *		u32 ramsize; (in GiB)
+				 * 		char regdomain[4];
+				 * 		u32 crc32;
+				 * 	};
+				 */
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			/* routed to PCIe0/mSATA connector (CN7A) */
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			/* routed to PCIe1/USB2 connector (CN61A) */
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			/* routed to PCIe2 connector (CN62A) */
+		};
+
+		sfp_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			/* routed to SFP+ */
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			/* ATSHA204A-MAHDA-T crypto module */
+			crypto@64 {
+				compatible = "atmel,atsha204a";
+				reg = <0x64>;
+			};
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			/* exposed on pin header */
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			pcawan: gpio@71 {
+				/*
+				 * GPIO expander for SFP+ signals and
+				 * and phy irq
+				 */
+				compatible = "nxp,pca9538";
+				reg = <0x71>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pcawan_pins>;
+
+				interrupt-parent = <&gpio1>;
+				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		marvell,reg-init = <3 18 0 0x4985>,
+				   <3 16 0xfff0 0x0001>;
+
+		/* irq is connected to &pcawan pin 7 */
+	};
+
+	/* Switch MV88E6176 at address 0x10 */
+	switch@10 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&swint_pins>;
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dsa,member = <0 0>;
+		reg = <0x10>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports@0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			ports@1 {
+				reg = <1>;
+				label = "lan1";
+			};
+
+			ports@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			ports@3 {
+				reg = <3>;
+				label = "lan3";
+			};
+
+			ports@4 {
+				reg = <4>;
+				label = "lan4";
+			};
+
+			ports@5 {
+				reg = <5>;
+				ethernet = <&eth1>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ports@6 {
+				reg = <6>;
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pcawan_pins: pcawan-pins {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	swint_pins: swint-pins {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+
+	spi0cs0_pins: spi0cs0-pins {
+		marvell,pins = "mpp25";
+		marvell,function = "spi0";
+	};
+
+	spi0cs2_pins: spi0cs2-pins {
+		marvell,pins = "mpp26";
+		marvell,function = "spi0";
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl164k", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x00100000>;
+				label = "U-Boot";
+			};
+
+			partition@100000 {
+				reg = <0x00100000 0x00700000>;
+				label = "Rescue system";
+			};
+		};
+	};
+
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
+};
+
+&uart0 {
+	/* Pin header CN10 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	/* Pin header CN11 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385.dtsi b/arch/arm/boot/dts/marvell/armada-385.dtsi
new file mode 100644
index 0000000000000..be8d607c59b21
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385.dtsi
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 385 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 385 family SoC";
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		pciec: pcie {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
+
+			/*
+			 * This port can be either x4 or x1. When
+			 * configured in x4 by the bootloader, then
+			 * pcie@4,0 is not available.
+			 */
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/*
+			 * x1 port only available when pcie@1,0 is
+			 * configured as a x1 port
+			 */
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv88f6820-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
new file mode 100644
index 0000000000000..f7daa3bc707ef
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+
+/dts-v1/;
+#include "armada-388-clearfog.dtsi"
+
+/ {
+	model = "SolidRun Clearfog Base A1";
+	compatible = "solidrun,clearfog-base-a1",
+		"solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&eth1 {
+	phy = <&phy1>;
+};
+
+&gpio0 {
+	phy1_reset {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "phy1-reset";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins &clearfog_phy_pins>;
+	phy1: ethernet-phy@1 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x101e>;
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	/* phy1 reset */
+	clearfog_phy_pins: clearfog-phy-pins {
+		marvell,pins = "mpp19";
+		marvell,function = "gpio";
+	};
+	rear_button_pins: rear-button-pins {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog-pro.dts
new file mode 100644
index 0000000000000..ff890c09c3ede
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog-pro.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+#include "armada-388-clearfog.dts"
+
+/ {
+	model = "SolidRun Clearfog Pro A1";
+	compatible = "solidrun,clearfog-pro-a1",
+		"solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
new file mode 100644
index 0000000000000..32c569df142ff
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+
+/dts-v1/;
+#include "armada-388-clearfog.dtsi"
+
+/ {
+	model = "SolidRun Clearfog A1";
+	compatible = "solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	soc {
+		internal-regs {
+			usb3@f0000 {
+				/* CON2, nearest CPU, USB2 only. */
+				status = "okay";
+			};
+		};
+
+		pcie {
+			pcie@3,0 {
+				/* Port 2, Lane 0. CON2, nearest CPU. */
+				reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	phy-mode = "1000base-x";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&expander0 {
+	/*
+	 * PCA9655 GPIO expander:
+	 *  0-CON3 CLKREQ#
+	 *  1-CON3 PERST#
+	 *  2-CON2 PERST#
+	 *  3-CON3 W_DISABLE
+	 *  4-CON2 CLKREQ#
+	 *  5-USB3 overcurrent
+	 *  6-USB3 power
+	 *  7-CON2 W_DISABLE
+	 *  8-JP4 P1
+	 *  9-JP4 P4
+	 * 10-JP4 P5
+	 * 11-m.2 DEVSLP
+	 * 12-SFP_LOS
+	 * 13-SFP_TX_FAULT
+	 * 14-SFP_TX_DISABLE
+	 * 15-SFP_MOD_DEF0
+	 */
+	pcie2-0-clkreq-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "pcie2.0-clkreq";
+	};
+	pcie2-0-w-disable-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "pcie2.0-w-disable";
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch@4 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <4>;
+		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan1";
+			};
+
+			port@5 {
+				reg = <5>;
+				ethernet = <&eth1>;
+				phy-mode = "1000base-x";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				/* 88E1512 external phy */
+				reg = <6>;
+				label = "lan6";
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
+		marvell,pins = "mpp46";
+		marvell,function = "ref";
+	};
+	clearfog_dsa0_pins: clearfog-dsa0-pins {
+		marvell,pins = "mpp23", "mpp41";
+		marvell,function = "gpio";
+	};
+	clearfog_spi1_cs_pins: spi1-cs-pins {
+		marvell,pins = "mpp55";
+		marvell,function = "spi1";
+	};
+	rear_button_pins: rear-button-pins {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+};
+
+&spi1 {
+	/*
+	 * Add SPI CS pins for clearfog:
+	 * CS0: W25Q32
+	 * CS1:
+	 * CS2: mikrobus
+	 */
+	pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dtsi b/arch/arm/boot/dts/marvell/armada-388-clearfog.dtsi
new file mode 100644
index 0000000000000..f8a06ae4a3c91
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dtsi
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree include file for SolidRun Clearfog 88F6828 based boards
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	soc {
+		internal-regs {
+			sata@a8000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sata@e0000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				pinctrl-0 = <&microsom_sdhci_pins
+					     &clearfog_sdhci_cd_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc-supply = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				/* CON3, nearest  power. */
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				/* CON7 */
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			pcie@2,0 {
+				/* Port 1, Lane 0. CON3, nearest power. */
+				reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	bm,pool-long = <2>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phys = <&comphy1 1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&eth2 {
+	/* ethernet@34000 */
+	bm,pool-long = <3>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	managed = "in-band-status";
+	phys = <&comphy5 2>;
+	phy-mode = "sgmii";
+	sfp = <&sfp>;
+	status = "okay";
+};
+
+&i2c0 {
+	/*
+	 * PCA9655 GPIO expander, up to 1MHz clock.
+	 *  0-CON3 CLKREQ#
+	 *  1-CON3 PERST#
+	 *  2-
+	 *  3-CON3 W_DISABLE
+	 *  4-
+	 *  5-USB3 overcurrent
+	 *  6-USB3 power
+	 *  7-
+	 *  8-JP4 P1
+	 *  9-JP4 P4
+	 * 10-JP4 P5
+	 * 11-m.2 DEVSLP
+	 * 12-SFP_LOS
+	 * 13-SFP_TX_FAULT
+	 * 14-SFP_TX_DISABLE
+	 * 15-SFP_MOD_DEF0
+	 */
+	expander0: gpio-expander@20 {
+		/*
+		 * This is how it should be:
+		 * compatible = "onnn,pca9655", "nxp,pca9555";
+		 * but you can't do this because of the way I2C works.
+		 */
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+
+		pcie1-0-clkreq-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "pcie1.0-clkreq";
+		};
+		pcie1-0-w-disable-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "pcie1.0-w-disable";
+		};
+		usb3-ilimit-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "usb3-current-limit";
+		};
+		usb3-power-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "usb3-power";
+		};
+		m2-devslp-hog {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "m.2 devslp";
+		};
+	};
+
+	/* The MCP3021 supports standard and fast modes */
+	mikrobus_adc: mcp3021@4c {
+		compatible = "microchip,mcp3021";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c1 {
+	/*
+	 * Routed to SFP, mikrobus, and PCIe.
+	 * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with
+	 *  address pins tied low, which takes addresses 0x50 and 0x51.
+	 * Mikrobus doesn't specify beyond an I2C bus being present.
+	 * PCIe uses ARP to assign addresses, or 0x63-0x64.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&clearfog_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pinctrl {
+	clearfog_i2c1_pins: i2c1-pins {
+		/* SFP, PCIe, mSATA, mikrobus */
+		marvell,pins = "mpp26", "mpp27";
+		marvell,function = "i2c1";
+	};
+	clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
+		marvell,pins = "mpp20";
+		marvell,function = "gpio";
+	};
+	mikro_pins: mikro-pins {
+		/* int: mpp22 rst: mpp29 */
+		marvell,pins = "mpp22", "mpp29";
+		marvell,function = "gpio";
+	};
+	mikro_spi_pins: mikro-spi-pins {
+		marvell,pins = "mpp43";
+		marvell,function = "spi1";
+	};
+	mikro_uart_pins: mikro-uart-pins {
+		marvell,pins = "mpp24", "mpp25";
+		marvell,function = "ua1";
+	};
+};
+
+&spi1 {
+	/*
+	 * Add SPI CS pins for clearfog:
+	 * CS0: W25Q32
+	 * CS1: PIC microcontroller (Pro models)
+	 * CS2: mikrobus
+	 */
+	pinctrl-0 = <&spi1_pins &mikro_spi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	/* mikrobus uart */
+	pinctrl-0 = <&mikro_uart_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-db.dts b/arch/arm/boot/dts/marvell/armada-388-db.dts
new file mode 100644
index 0000000000000..45cc784659fd6
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-db.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 388 evaluation board
+ * (DB-88F6820)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Development Board";
+	compatible = "marvell,a385-db", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				audio_codec: audio-codec@4a {
+					#sound-dai-cells = <0>;
+					compatible = "cirrus,cs42l51";
+					reg = <0x4a>;
+				};
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
+			};
+
+			mdio@72004 {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sata@e0000 {
+				status = "okay";
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			audio-controller@e8000 {
+				pinctrl-0 = <&i2s_pins>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Armada 385 DB Audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Out Jack",
+			"Line", "In Jack";
+		simple-audio-card,routing =
+			"Out Jack", "HPL",
+			"Out Jack", "HPR",
+			"AIN1L", "In Jack",
+			"AIN1R", "In Jack";
+		status = "disabled";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 0>;
+			};
+
+			codec {
+				sound-dai = <&audio_codec>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+
+		simple-audio-card,dai-link@2 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-gp.dts b/arch/arm/boot/dts/marvell/armada-388-gp.dts
new file mode 100644
index 0000000000000..e2ba50520b6b0
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-gp.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 development board
+ * (RD-88F6820-GP)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 388 DB-88F6820-GP";
+	compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+				clock-frequency = <100000>;
+
+				expander0: pca9555@20 {
+					compatible = "nxp,pca9555";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pca0_pins>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					reg = <0x20>;
+				};
+
+				expander1: pca9555@21 {
+					compatible = "nxp,pca9555";
+					pinctrl-names = "default";
+					interrupt-parent = <&gpio0>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					reg = <0x21>;
+				};
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				/*
+				 * Exported on the micro USB connector CON16
+				 * through an FTDI
+				 */
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			/* GE1 CON15 */
+			ethernet@30000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
+			};
+
+			/* CON4 */
+			usb@58000 {
+				vcc-supply = <&reg_usb2_0_vbus>;
+				status = "okay";
+			};
+
+			/* GE0 CON1 */
+			ethernet@70000 {
+				pinctrl-names = "default";
+				/*
+				 * The Reference Clock 0 is used to provide a
+				 * clock to the PHY
+				 */
+				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
+			};
+
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy1: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			sata@a8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata0_pins>, <&sata1_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata0>;
+				};
+
+				sata1: sata-port@1 {
+					reg = <1>;
+					target-supply = <&reg_5v_sata1>;
+				};
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			sata@e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata2: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata2>;
+				};
+
+				sata3: sata-port@1 {
+					reg = <1>;
+					target-supply = <&reg_5v_sata3>;
+				};
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				no-1-8-v;
+				/*
+				 * A388-GP board v1.5 and higher replace
+				 * hitherto card detection method based on GPIO
+				 * with the one using DAT3 pin. As they are
+				 * incompatible, software-based polling is
+				 * enabled with 'broken-cd' property. For boards
+				 * older than v1.5 it can be replaced with:
+				 * 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;',
+				 * whereas for the newer ones following can be
+				 * used instead:
+				 * 'dat3-cd;'
+				 * 'cd-inverted;'
+				 */
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+			};
+
+			/* CON5 */
+			usb3@f0000 {
+				usb-phy = <&usb2_1_phy>;
+				status = "okay";
+			};
+
+			/* CON7 */
+			usb3@f8000 {
+				usb-phy = <&usb3_phy>;
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/*
+			 * The two other PCIe units are accessible
+			 * through mini PCIe slot on the board.
+			 */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		gpio-fan {
+			compatible = "gpio-fan";
+			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
+			gpio-fan,speed-map = <	 0 0
+					      3000 1>;
+		};
+	};
+
+	usb2_1_phy: usb2_1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb2_1_vbus>;
+		#phy-cells = <0>;
+	};
+
+	usb3_phy: usb3_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_vbus>;
+		#phy-cells = <0>;
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_0_vbus: v5-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-vbus0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_1_vbus: v5-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sata0: pwr-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata0: v5-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_12v_sata0: v12-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_sata1: pwr-sata1 {
+		regulator-name = "pwr_en_sata1";
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata1: v5-sata1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_sata1>;
+	};
+
+	reg_12v_sata1: v12-sata1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata1";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_sata1>;
+	};
+
+	reg_sata2: pwr-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata2";
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata2: v5-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_sata2>;
+	};
+
+	reg_12v_sata2: v12-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata2";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_sata2>;
+	};
+
+	reg_sata3: pwr-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata3";
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata3: v5-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_sata3>;
+	};
+
+	reg_12v_sata3: v12-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata3";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_sata3>;
+	};
+};
+
+&pinctrl {
+	pca0_pins: pca0_pins {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-helios4.dts b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
new file mode 100644
index 0000000000000..ec134e22bae3e
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Helios4
+ * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io>
+ *
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+	model = "Helios4";
+	compatible = "kobol,helios4", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_12v: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "power_brick_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_12v>;
+	};
+
+	reg_5p0v_hdd: regulator-5v-hdd {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_HDD";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_12v>;
+	};
+
+	reg_5p0v_usb: regulator-5v-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "USB-PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_12v>;
+	};
+
+	system-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_system_led_pins>;
+
+		status-led {
+			label = "helios4:green:status";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		fault-led {
+			label = "helios4:red:fault";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	io-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_io_led_pins>;
+
+		sata1-led {
+			label = "helios4:green:ata1";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata1";
+			default-state = "off";
+		};
+		sata2-led {
+			label = "helios4:green:ata2";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata2";
+			default-state = "off";
+		};
+		sata3-led {
+			label = "helios4:green:ata3";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata3";
+			default-state = "off";
+		};
+		sata4-led {
+			label = "helios4:green:ata4";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata4";
+			default-state = "off";
+		};
+		usb-led {
+			label = "helios4:green:usb";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usb-host";
+			default-state = "off";
+		};
+	};
+
+	fan1: j10-pwm {
+		compatible = "pwm-fan";
+		pwms = <&gpio1 9 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan1_pins>;
+	};
+
+	fan2: j17-pwm {
+		compatible = "pwm-fan";
+		pwms = <&gpio1 23 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan2_pins>;
+	};
+
+	usb2_phy: usb2-phy {
+		compatible = "usb-nop-xceiv";
+		vbus-regulator = <&reg_5p0v_usb>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+	};
+
+	soc {
+		internal-regs {
+			i2c@11000 {
+				/*
+				 * PCA9655 GPIO expander, up to 1MHz clock.
+				 *  0-Board Revision bit 0 #
+				 *  1-Board Revision bit 1 #
+				 *  5-USB3 overcurrent
+				 *  6-USB3 power
+				 */
+				expander0: gpio-expander@20 {
+					/*
+					 * This is how it should be:
+					 * compatible = "onnn,pca9655",
+					 *	 "nxp,pca9555";
+					 * but you can't do this because of
+					 * the way I2C works.
+					 */
+					compatible = "nxp,pca9555";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x20>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pca0_pins>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+
+					board-rev-bit-0-hog {
+						gpio-hog;
+						gpios = <0 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "board-rev-0";
+					};
+					board-rev-bit-1-hog {
+						gpio-hog;
+						gpios = <1 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "board-rev-1";
+					};
+					usb3-ilimit-hog {
+						gpio-hog;
+						gpios = <5 GPIO_ACTIVE_HIGH>;
+						input;
+						line-name = "usb-overcurrent-status";
+					};
+				};
+
+				temp_sensor: temp@4c {
+					compatible = "ti,lm75";
+					reg = <0x4c>;
+					vcc-supply = <&reg_3p3v>;
+				};
+			};
+
+			i2c@11100 {
+				/*
+				 * External I2C Bus for user peripheral
+				 */
+				clock-frequency = <400000>;
+				pinctrl-0 = <&helios_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+				};
+
+				sata1: sata-port@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@e0000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata2: sata-port@0 {
+					reg = <0>;
+				};
+
+				sata3: sata-port@1 {
+					reg = <1>;
+				};
+			};
+
+			spi@10680 {
+				pinctrl-0 = <&spi1_pins
+					     &microsom_spi1_cs_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				pinctrl-0 = <&helios_sdhci_pins
+					     &helios_sdhci_cd_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				usb-phy = <&usb2_phy>;
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				pca0_pins: pca0-pins {
+					marvell,pins = "mpp23";
+					marvell,function = "gpio";
+				};
+				microsom_phy0_int_pins: microsom-phy0-int-pins {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+				helios_i2c1_pins: i2c1-pins {
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+				helios_sdhci_cd_pins: helios-sdhci-cd-pins {
+					marvell,pins = "mpp20";
+					marvell,function = "gpio";
+				};
+				helios_sdhci_pins: helios-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+				helios_system_led_pins: helios-system-led-pins {
+					marvell,pins = "mpp24", "mpp25";
+					marvell,function = "gpio";
+				};
+				helios_io_led_pins: helios-io-led-pins {
+					marvell,pins = "mpp49", "mpp50",
+						       "mpp52", "mpp53",
+						       "mpp54";
+					marvell,function = "gpio";
+				};
+				helios_fan1_pins: helios_fan1_pins {
+					marvell,pins = "mpp41", "mpp43";
+					marvell,function = "gpio";
+				};
+				helios_fan2_pins: helios_fan2_pins {
+					marvell,pins = "mpp48", "mpp55";
+					marvell,function = "gpio";
+				};
+				microsom_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp59";
+					marvell,function = "spi1";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-rd.dts b/arch/arm/boot/dts/marvell/armada-388-rd.dts
new file mode 100644
index 0000000000000..c0efafd45b338
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-rd.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 388 Reference Design board
+ * (RD-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Reference Design";
+	compatible = "marvell,a385-rd", "marvell,armada388",
+		"marvell,armada385","marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				broken-cd;
+				no-1-8-v;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+
+			mdio@72004 {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/marvell/armada-388.dtsi b/arch/arm/boot/dts/marvell/armada-388.dtsi
new file mode 100644
index 0000000000000..f3a020ff577e3
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 388 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * The main difference with the Armada 385 is that the 388 can handle two more
+ * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl
+ * property and the name of the SoC, and add the second SATA host which control
+ * the 2 other ports.
+ */
+
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 388 family SoC";
+	compatible = "marvell,armada388", "marvell,armada385",
+		"marvell,armada380";
+	soc {
+		internal-regs {
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv88f6828-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/marvell/armada-38x-solidrun-microsom.dtsi
new file mode 100644
index 0000000000000..2c64bc6e5a170
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-38x-solidrun-microsom.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Armada 38x Microsom
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			rtc@a3800 {
+				/*
+				 * If the rtc doesn't work, run "date reset"
+				 * twice in u-boot.
+				 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	phy = <&phy_dedicated>;
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	status = "okay";
+};
+
+&mdio {
+	/*
+	 * Add the phy clock here, so the phy can be accessed to read its
+	 * IDs prior to binding with the driver.
+	 */
+	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
+	pinctrl-names = "default";
+
+	phy_dedicated: ethernet-phy@0 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x101e>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
+&pinctrl {
+	microsom_phy_clk_pins: microsom-phy-clk-pins {
+		marvell,pins = "mpp45";
+		marvell,function = "ref";
+	};
+	/* Optional eMMC */
+	microsom_sdhci_pins: microsom-sdhci-pins {
+		marvell,pins = "mpp21", "mpp28", "mpp37",
+			       "mpp38", "mpp39", "mpp40";
+		marvell,function = "sd0";
+	};
+};
+
+&spi1 {
+	/* The microsom has an optional W25Q32 on board, connected to CS0 */
+	pinctrl-0 = <&spi1_pins>;
+
+	w25q32: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-38x.dtsi b/arch/arm/boot/dts/marvell/armada-38x.dtsi
new file mode 100644
index 0000000000000..446861b6b17b2
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-38x.dtsi
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 38x family of SoCs.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	model = "Marvell Armada 38x family SoC";
+	compatible = "marvell,armada380";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
+	soc {
+		compatible = "marvell,armada380-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
+		};
+
+		devbus_bootcs: devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs0: devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs1: devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs2: devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs3: devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			sdramc: sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+				arm,double-linefill-incr = <0>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <0>;
+				prefetch-data = <1>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer@c200 {
+				compatible = "arm,cortex-a9-global-timer";
+				reg = <0xc200 0x20>;
+				interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "marvell,armada-38x-uart", "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "marvell,armada-38x-uart", "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@18000 {
+				reg = <0x18000 0x20>;
+
+				ge0_rgmii_pins: ge-rgmii-pins-0 {
+					marvell,pins = "mpp6", "mpp7", "mpp8",
+						       "mpp9", "mpp10", "mpp11",
+						       "mpp12", "mpp13", "mpp14",
+						       "mpp15", "mpp16", "mpp17";
+					marvell,function = "ge0";
+				};
+
+				ge1_rgmii_pins: ge-rgmii-pins-1 {
+					marvell,pins = "mpp21", "mpp27", "mpp28",
+						       "mpp29", "mpp30", "mpp31",
+						       "mpp32", "mpp37", "mpp38",
+						       "mpp39", "mpp40", "mpp41";
+					marvell,function = "ge1";
+				};
+
+				i2c0_pins: i2c-pins-0 {
+					marvell,pins = "mpp2", "mpp3";
+					marvell,function = "i2c0";
+				};
+
+				mdio_pins: mdio-pins {
+					marvell,pins = "mpp4", "mpp5";
+					marvell,function = "ge";
+				};
+
+				ref_clk0_pins: ref-clk-pins-0 {
+					marvell,pins = "mpp45";
+					marvell,function = "ref";
+				};
+
+				ref_clk1_pins: ref-clk-pins-1 {
+					marvell,pins = "mpp46";
+					marvell,function = "ref";
+				};
+
+				spi0_pins: spi-pins-0 {
+					marvell,pins = "mpp22", "mpp23", "mpp24",
+						       "mpp25";
+					marvell,function = "spi0";
+				};
+
+				spi1_pins: spi-pins-1 {
+					marvell,pins = "mpp56", "mpp57", "mpp58",
+						       "mpp59";
+					marvell,function = "spi1";
+				};
+
+				nand_pins: nand-pins {
+					marvell,pins = "mpp22", "mpp34", "mpp23",
+						       "mpp33", "mpp38", "mpp28",
+						       "mpp40", "mpp42", "mpp35",
+						       "mpp36", "mpp25", "mpp30",
+						       "mpp32";
+					marvell,function = "dev";
+				};
+
+				nand_rb: nand-rb {
+					marvell,pins = "mpp41";
+					marvell,function = "nand";
+				};
+
+				uart0_pins: uart-pins-0 {
+					marvell,pins = "mpp0", "mpp1";
+					marvell,function = "ua0";
+				};
+
+				uart1_pins: uart-pins-1 {
+					marvell,pins = "mpp19", "mpp20";
+					marvell,function = "ua1";
+				};
+
+				sdhci_pins: sdhci-pins {
+					marvell,pins = "mpp48", "mpp49", "mpp50",
+						       "mpp52", "mpp53", "mpp54",
+						       "mpp55", "mpp57", "mpp58",
+						       "mpp59";
+					marvell,function = "sd0";
+				};
+
+				sata0_pins: sata-pins-0 {
+					marvell,pins = "mpp20";
+					marvell,function = "sata0";
+				};
+
+				sata1_pins: sata-pins-1 {
+					marvell,pins = "mpp19";
+					marvell,function = "sata1";
+				};
+
+				sata2_pins: sata-pins-2 {
+					marvell,pins = "mpp47";
+					marvell,function = "sata2";
+				};
+
+				sata3_pins: sata-pins-3 {
+					marvell,pins = "mpp44";
+					marvell,function = "sata3";
+				};
+
+				i2s_pins: i2s-pins {
+					marvell,pins = "mpp48", "mpp49",
+						       "mpp50", "mpp51",
+						       "mpp52", "mpp53";
+					marvell,function = "audio";
+				};
+
+				spdif_pins: spdif-pins {
+					marvell,pins = "mpp51";
+					marvell,function = "audio";
+				};
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 32>;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <28>;
+				gpio-controller;
+				gpio-ranges = <&pinctrl 0 32 28>;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-380-system-controller",
+					     "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-380-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			comphy: phy@18300 {
+				compatible = "marvell,armada-380-comphy";
+				reg-names = "comphy", "conf";
+				reg = <0x18300 0x100>, <0x18460 4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				comphy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <1>;
+				};
+
+				comphy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <1>;
+				};
+
+				comphy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <1>;
+				};
+
+				comphy3: phy@3 {
+					reg = <3>;
+					#phy-cells = <1>;
+				};
+
+				comphy4: phy@4 {
+					reg = <4>;
+					#phy-cells = <1>;
+				};
+
+				comphy5: phy@5 {
+					reg = <5>;
+					#phy-cells = <1>;
+				};
+			};
+
+			coreclk: mvebu-sar@18600 {
+				compatible = "marvell,armada-380-core-clock";
+				reg = <0x18600 0x04>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>,
+				      <0x20250 0x8>;
+			};
+
+			mpic: interrupt-controller@20a00 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer: timer@20300 {
+				compatible = "marvell,armada-380-timer",
+					     "marvell,armada-xp-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog: watchdog@20300 {
+				compatible = "marvell,armada-380-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+				interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			cpurst: cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			mpcore-soc-ctrl@20d20 {
+				compatible = "marvell,armada-380-mpcore-soc-ctrl";
+				reg = <0x20d20 0x6c>;
+			};
+
+			coherencyfab: coherency-fabric@21010 {
+				compatible = "marvell,armada-380-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			pmsu: pmsu@22000 {
+				compatible = "marvell,armada-380-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			/*
+			 * As a special exception to the "order by
+			 * register address" rule, the eth0 node is
+			 * placed here to ensure that it gets
+			 * registered as the first interface, since
+			 * the network subsystem doesn't allow naming
+			 * interfaces using DT aliases. Without this,
+			 * the ordering of interfaces is different
+			 * from the one used in U-Boot and the
+			 * labeling of interfaces on the boards, which
+			 * is very confusing for users.
+			 */
+			eth0: ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x70000 0x4000>;
+				interrupts-extended = <&mpic 8>;
+				clocks = <&gateclk 4>;
+				tx-csum-limit = <9800>;
+				status = "disabled";
+			};
+
+			eth1: ethernet@30000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x30000 0x4000>;
+				interrupts-extended = <&mpic 10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+			};
+
+			eth2: ethernet@34000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x34000 0x4000>;
+				interrupts-extended = <&mpic 12>;
+				clocks = <&gateclk 2>;
+				status = "disabled";
+			};
+
+			usb0: usb@58000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x58000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				status = "disabled";
+			};
+
+			xor0: xor@60800 {
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor1: xor@60900 {
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			mdio: mdio@72004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
+			};
+
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-38x-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 23>, <&gateclk 21>,
+					 <&gateclk 14>, <&gateclk 16>;
+				clock-names = "cesa0", "cesa1",
+					      "cesaz0", "cesaz1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			rtc: rtc@a3800 {
+				compatible = "marvell,armada-380-rtc";
+				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ahci0: sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			bm: bm@c8000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc8000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
+			ahci1: sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+			coredivclk: clock@e4250 {
+				compatible = "marvell,armada-380-corediv-clock";
+				reg = <0xe4250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
+			thermal: thermal@e8078 {
+				compatible = "marvell,armada380-thermal";
+				reg = <0xe4078 0x4>, <0xe4070 0x8>;
+				status = "okay";
+			};
+
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			sdhci: sdhci@d8000 {
+				compatible = "marvell,armada-380-sdhci";
+				reg-names = "sdhci", "mbus", "conf-sdio3";
+				reg = <0xd8000 0x1000>,
+					<0xdc000 0x100>,
+					<0x18454 0x4>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 17>;
+				mrvl,clk-delay-cycles = <0x1F>;
+				status = "disabled";
+			};
+
+			audio_controller: audio-controller@e8000 {
+				#sound-dai-cells = <1>;
+				compatible = "marvell,armada-380-audio";
+				reg = <0xe8000 0x4000>, <0x18410 0xc>,
+				      <0x18204 0x4>;
+				reg-names = "i2s_regs", "pll_regs", "soc_ctrl";
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 0>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			usb3_0: usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			usb3_1: usb3@f8000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
+			clocks = <&gateclk 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
+		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		/* 1 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-390-db.dts b/arch/arm/boot/dts/marvell/armada-390-db.dts
new file mode 100644
index 0000000000000..20f518dbac971
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-390-db.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 390 Development Board
+ * (DB-88F6920)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ */
+
+/dts-v1/;
+#include "armada-390.dtsi"
+
+/ {
+	model = "Marvell Armada 390 Development Board";
+	compatible = "marvell,a390-db", "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@50 {
+					compatible = "atmel,24c64";
+					reg = <0x50>;
+				};
+			};
+
+			/* CON104 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* CON97 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON98 */
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			/* CON30 */
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			/* CON44 */
+			pcie@2,0 {
+				status = "okay";
+			};
+
+			/* CON61 */
+			pcie@3,0 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13",
+			     "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x400000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x400000 0xc00000>;
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-390.dtsi b/arch/arm/boot/dts/marvell/armada-390.dtsi
new file mode 100644
index 0000000000000..aa2057d4d6f81
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-390.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 390 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+	compatible = "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6920-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-395-gp.dts b/arch/arm/boot/dts/marvell/armada-395-gp.dts
new file mode 100644
index 0000000000000..6dd9e9077f842
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-395-gp.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 395 GP board
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ */
+
+/dts-v1/;
+#include "armada-395.dtsi"
+
+/ {
+	model = "Marvell Armada 395 GP Board";
+	compatible = "marvell,a395-gp", "marvell,armada395",
+		     "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				/*
+				 * Exported on the micro USB connector CON17
+				 * through an FTDI
+				 */
+				status = "okay";
+			};
+
+			/* CON1 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON2 */
+			sata@a8000 {
+				status = "okay";
+			};
+
+			/* CON18 */
+			sdhci@d8000 {
+				clock-frequency = <200000000>;
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			/* CON4 */
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			/*
+			 * The two PCIe units are accessible through
+			 * mini PCIe slot on the board.
+			 */
+
+			/* CON7 */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			/* CON8 */
+			pcie@4,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x00000000 0x00600000>;
+				read-only;
+			};
+
+			partition@800000 {
+				label = "uImage";
+				reg = <0x00600000 0x00400000>;
+				read-only;
+			};
+
+			partition@1000000 {
+				label = "Root";
+				reg = <0x00a00000 0x3f600000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-395.dtsi b/arch/arm/boot/dts/marvell/armada-395.dtsi
new file mode 100644
index 0000000000000..e18a7d9cd7d43
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-395.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 395 SoC.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+	compatible = "marvell,armada395", "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6925-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+
+			sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-398-db.dts b/arch/arm/boot/dts/marvell/armada-398-db.dts
new file mode 100644
index 0000000000000..ec6cdbeedde71
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-398-db.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 398 Development Board
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-398.dtsi"
+
+/ {
+	model = "Marvell Armada 398 Development Board";
+	compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				pinctrl-0 = <&uart0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			serial@12100 {
+				pinctrl-0 = <&uart1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0 0x400000>;
+		};
+
+		partition@400000 {
+			label = "Filesystem";
+			reg = <0x400000 0x1000000>;
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-398.dtsi b/arch/arm/boot/dts/marvell/armada-398.dtsi
new file mode 100644
index 0000000000000..c5ac89399ce14
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-398.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 398 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-395.dtsi"
+
+/ {
+	compatible = "marvell,armada398", "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6928-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-39x.dtsi b/arch/arm/boot/dts/marvell/armada-39x.dtsi
new file mode 100644
index 0000000000000..9d1cac49c022f
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-39x.dtsi
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 39x family of SoCs.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Marvell Armada 39x family SoC";
+	compatible = "marvell,armada390";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-390-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
+	soc {
+		compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+				arm,double-linefill-incr = <0>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <0>;
+				prefetch-data = <1>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x100>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@11200 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11200 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@11300 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11300 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart2: serial@12200 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl@18000 {
+				i2c0_pins: i2c0-pins {
+					marvell,pins = "mpp2", "mpp3";
+					marvell,function = "i2c0";
+				};
+
+				uart0_pins: uart0-pins {
+					marvell,pins = "mpp0", "mpp1";
+					marvell,function = "ua0";
+				};
+
+				uart1_pins: uart1-pins {
+					marvell,pins = "mpp19", "mpp20";
+					marvell,function = "ua1";
+				};
+
+				spi1_pins: spi1-pins {
+					marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
+					marvell,function = "spi1";
+				};
+
+				nand_pins: nand-pins {
+					marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33",
+						       "mpp38", "mpp28", "mpp40", "mpp42",
+						       "mpp35", "mpp36", "mpp25", "mpp30",
+						       "mpp32";
+					marvell,function = "dev";
+				};
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <28>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-390-system-controller",
+					     "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-390-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18600 {
+				compatible = "marvell,armada-390-core-clock";
+				reg = <0x18600 0x04>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
+			};
+
+			mpic: interrupt-controller@20a00 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-380-timer",
+					     "marvell,armada-xp-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 2>, <&coreclk 5>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,armada-380-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>,
+				      <0x18260 0x4>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			mpcore-soc-ctrl@20d20 {
+				compatible = "marvell,armada-380-mpcore-soc-ctrl";
+				reg = <0x20d20 0x6c>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-380-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			pmsu@22000 {
+				compatible = "marvell,armada-390-pmsu",
+					     "marvell,armada-380-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			xor@60800 {
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@60900 {
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			rtc@a3800 {
+				compatible = "marvell,armada-380-rtc";
+				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			sdhci@d8000 {
+				compatible = "marvell,armada-380-sdhci";
+				reg-names = "sdhci", "mbus", "conf-sdio3";
+				reg = <0xd8000 0x1000>,
+					<0xdc000 0x100>,
+					<0x18454 0x4>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 17>;
+				mrvl,clk-delay-cycles = <0x1F>;
+				status = "disabled";
+			};
+
+			coredivclk: clock@e4250 {
+				compatible = "marvell,armada-390-corediv-clock",
+					     "marvell,armada-380-corediv-clock";
+				reg = <0xe4250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada380-thermal";
+				reg = <0xe4078 0x4>, <0xe4074 0x4>;
+				status = "okay";
+			};
+		};
+
+		pcie {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
+
+			/*
+			 * This port can be either x4 or x1. When
+			 * configured in x4 by the bootloader, then
+			 * pcie@4,0 is not available.
+			 */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/*
+			 * x1 port only available when pcie@1,0 is
+			 * configured as a x1 port
+			 */
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		/* 1 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi
new file mode 100644
index 0000000000000..7a7e2066c498a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx3236 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-370-xp.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Marvell 98DX3236 SoC";
+	compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,98dx3236-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
+			  MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		/*
+		 * 98DX3236 has 1 x1 PCIe unit Gen2.0
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			sdramc: sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
+			L2: l2-cache@8000 {
+				compatible = "marvell,aurora-system-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-level = <2>;
+				cache-unified;
+				wt-override;
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			/* does not exist */
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				status = "disabled";
+			};
+
+			gpio2: gpio@18180 { /* rework some properties */
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <1>; /* only gpio #32 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>;
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x500>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,mv98dx3236-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
+				compatible = "marvell,mv98dx3236-cpu-clock";
+				reg = <0x18700 0x24>, <0x1c054 0x10>;
+				clocks = <&coreclk 1>;
+			};
+
+			corediv-clock@18740 {
+				status = "disabled";
+			};
+
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
+			ethernet@70000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			xor1: xor@f0800 {
+				compatible = "marvell,orion-xor";
+				reg = <0xf0800 0x100
+				       0xf0a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			nand_controller: nand-controller@d0000 {
+				clocks = <&dfx_coredivclk 0>;
+			};
+
+			xor0: xor@f0900 {
+				compatible = "marvell,orion-xor";
+				reg = <0xF0900 0x100
+				       0xF0B00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+		};
+
+		dfx: dfx-server@ac000000 {
+			compatible = "marvell,dfx-server", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
+
+			coreclk: mvebu-sar@f8204 {
+				compatible = "marvell,mv98dx3236-core-clock";
+				reg = <0xf8204 0x4>;
+				#clock-cells = <1>;
+			};
+
+			dfx_coredivclk: corediv-clock@f8268 {
+				compatible = "marvell,mv98dx3236-corediv-clock";
+				reg = <0xf8268 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+		};
+
+		switch: switch@a8000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
+
+			pp0: packet-processor@0 {
+				compatible = "marvell,prestera-98dx3236", "marvell,prestera";
+				reg = <0 0x4000000>;
+				interrupts = <33>, <34>, <35>;
+				dfx = <&dfx>;
+			};
+		};
+	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
+
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
+};
+
+&pinctrl {
+	compatible = "marvell,98dx3236-pinctrl";
+
+	nand_pins: nand-pins {
+		marvell,pins = "mpp20", "mpp21", "mpp22",
+			       "mpp23", "mpp24", "mpp25",
+			       "mpp26", "mpp27", "mpp28",
+			       "mpp29", "mpp30";
+		marvell,function = "dev";
+	};
+
+	nand_rb: nand-rb {
+		marvell,pins = "mpp19";
+		marvell,function = "nand";
+	};
+
+	spi0_pins: spi0-pins {
+		marvell,pins = "mpp0", "mpp1",
+			       "mpp2", "mpp3";
+		marvell,function = "spi0";
+	};
+
+	i2c0_pins: i2c-pins-0 {
+		marvell,pins = "mpp14", "mpp15";
+		marvell,function = "i2c0";
+	};
+};
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&sdio {
+	status = "disabled";
+};
+
+&uart0 {
+	compatible = "marvell,armada-38x-uart";
+};
+
+&uart1 {
+	compatible = "marvell,armada-38x-uart";
+};
+
diff --git a/arch/arm/boot/dts/marvell/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx3336.dtsi
new file mode 100644
index 0000000000000..1d9d8a8ea60ca
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-98dx3336.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx3336 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "Marvell 98DX3336 SoC";
+	compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			resume@20980 {
+				compatible = "marvell,98dx3336-resume-ctrl";
+				reg = <0x20980 0x10>;
+			};
+		};
+	};
+};
+
+&pp0 {
+	compatible = "marvell,prestera-98dx3336", "marvell,prestera";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx4251.dtsi
new file mode 100644
index 0000000000000..48ffdc72bfc75
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-98dx4251.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx4521 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx4521 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "Marvell 98DX4251 SoC";
+	compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			resume@20980 {
+				compatible = "marvell,98dx3336-resume-ctrl";
+				reg = <0x20980 0x10>;
+			};
+		};
+	};
+};
+
+&sdio {
+	status = "okay";
+};
+
+&pinctrl {
+	compatible = "marvell,98dx4251-pinctrl";
+
+	sdio_pins: sdio-pins {
+		marvell,pins = "mpp5", "mpp6", "mpp7",
+			       "mpp8", "mpp9", "mpp10";
+		marvell,function = "sd0";
+	};
+};
+
+&pp0 {
+	compatible = "marvell,prestera-98dx4251", "marvell,prestera";
+	interrupts = <33>, <34>, <35>, <36>;
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/marvell/armada-xp-axpwifiap.dts
new file mode 100644
index 0000000000000..5a74197be0ad8
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-axpwifiap.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell RD-AXPWiFiAP.
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the
+ * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used.
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Marvell RD-AXPWiFiAP";
+	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+			/* UART0 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* UART1 */
+			serial@12100 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&keys_pin>;
+		pinctrl-names = "default";
+
+		button-reset {
+			label = "Factory Reset Button";
+			linux,code = <KEY_SETUP>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* First mini-PCIe port */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Second mini-PCIe port */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Renesas uPD720202 USB 3.0 controller */
+	pcie@3,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&phy_int_pin>;
+	pinctrl-names = "default";
+
+	keys_pin: keys-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	phy_int_pin: phy-int-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s-bit.dts
new file mode 100644
index 0000000000000..c28e140b4afc8
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s-bit.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS305-1G-4S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs305-1g-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS305-1G-4S+ Bit";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x03f00000>;
+			label = "ubi1";
+		};
+		partition@ubi2 {
+			reg = <0x04100000 0x03f00000>;
+			label = "ubi2";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dts b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dts
new file mode 100644
index 0000000000000..010b83b542127
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS305-1G-4S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs305-1g-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS305-1G-4S+";
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dtsi
new file mode 100644
index 0000000000000..47b003a81bd4b
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS305-1G-4S board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "CRS305-1G-4S+";
+	compatible = "mikrotik,crs305-1g-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x00e00000>;
+			label = "ubi1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s-bit.dts
new file mode 100644
index 0000000000000..20ba5c823bb27
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s-bit.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS326-24G-2S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs326-24g-2s.dtsi"
+
+/ {
+	model = "MikroTik CRS326-24G-2S+ Bit";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x03f00000>;
+			label = "ubi1";
+		};
+		partition@ubi2 {
+			reg = <0x04100000 0x03f00000>;
+			label = "ubi2";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dts b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dts
new file mode 100644
index 0000000000000..83aef43f66d54
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS326-24G-2S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs326-24g-2s.dtsi"
+
+/ {
+	model = "MikroTik CRS326-24G-2S+";
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dtsi
new file mode 100644
index 0000000000000..cab99d8e29113
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS326-24G-2S board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "CRS326-24G-2S+";
+	compatible = "mikrotik,crs326-24g-2s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x00e00000>;
+			label = "ubi1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s-bit.dts
new file mode 100644
index 0000000000000..2caa3980fdf66
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s-bit.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS328-4C-20S-4S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs328-4c-20s-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS328-4C-20S-4S+ Bit";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x03f00000>;
+			label = "ubi1";
+		};
+		partition@ubi2 {
+			reg = <0x04100000 0x03f00000>;
+			label = "ubi2";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dts b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dts
new file mode 100644
index 0000000000000..665757f6e18ea
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS328-4C-20S-4S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs328-4c-20s-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS328-4C-20S-4S+";
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dtsi
new file mode 100644
index 0000000000000..7028482ce4b2d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS328-4C-20S-4S+ board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "CRS328-4C-20S-4S+";
+	compatible = "mikrotik,crs328-4c-20s-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x00e00000>;
+			label = "ubi1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/marvell/armada-xp-db-dxbc2.dts
new file mode 100644
index 0000000000000..02bef8dc42701
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-db-dxbc2.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for DB-DXBC2 board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx4251.dtsi"
+
+/ {
+	model = "Marvell Bobcat2 Evaluation Board";
+	compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
+&sdio {
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	/* No CD or WP GPIOs */
+	broken-cd;
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00100000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00100000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00140000 0x00ec0000>;
+			label = "unused";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/marvell/armada-xp-db-xc3-24g4xg.dts
new file mode 100644
index 0000000000000..d1b61dad0c461
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-db-xc3-24g4xg.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for DB-XC3-24G4XG board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3336.dtsi"
+
+/ {
+	model = "DB-XC3-24G4XG";
+	compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00100000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00100000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00140000 0x00ec0000>;
+			label = "unused";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-db.dts b/arch/arm/boot/dts/marvell/armada-xp-db.dts
new file mode 100644
index 0000000000000..75318fd0fc117
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-db.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada XP evaluation board
+ * (DB-78460-BP)
+ *
+ * Copyright (C) 2012-2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+  *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Evaluation Board";
+	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				/* No CD or WP GPIOs */
+				broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			usb@52000 {
+				status = "okay";
+			};
+
+			nand-controller@d0000 {
+				status = "okay";
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "U-Boot";
+							reg = <0 0x800000>;
+						};
+						partition@800000 {
+							label = "Linux";
+							reg = <0x800000 0x800000>;
+						};
+						partition@1000000 {
+							label = "Filesystem";
+							reg = <0x1000000 0x3f000000>;
+						};
+					};
+				};
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * All 6 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+	pcie@3,0 {
+		/* Port 0, Lane 2 */
+		status = "okay";
+	};
+	pcie@4,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@a,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <25>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <27>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-gp.dts b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
new file mode 100644
index 0000000000000..d1d348b91c0a8
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada XP development board
+ * (DB-MV784MP-GP)
+ *
+ * Copyright (C) 2013-2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
+	compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/*
+                 * 8 GB of plug-in RAM modules by default.The amount
+                 * of memory available can be changed by the
+                 * bootloader according the size of the module
+                 * actually plugged. However, memory between
+                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
+                 * the address range used for I/O (internal registers,
+                 * MBus windows).
+		 */
+		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
+		      <0x00000001 0x00000000 0x00000001 0x00000000>;
+	};
+
+	cpus {
+		pm_pic {
+			ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
+				     <&gpio0 17 GPIO_ACTIVE_LOW>,
+				     <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+			pinctrl {
+				pinctrl-0 = <&pic_pins>;
+				pinctrl-names = "default";
+				pic_pins: pic-pins-0 {
+					marvell,pins = "mpp16", "mpp17",
+						       "mpp18";
+					marvell,function = "gpio";
+				};
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+
+			/* Front-side USB slot */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* Back-side USB slot */
+			usb@51000 {
+				status = "okay";
+			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+
+			nand-controller@d0000 {
+				status = "okay";
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+				};
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * The 3 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@a,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <16>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <17>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <18>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <19>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/marvell/armada-xp-lenovo-ix4-300d.dts
new file mode 100644
index 0000000000000..21b95578fe953
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-lenovo-ix4-300d.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Lenovo Iomega ix4-300d
+ *
+ * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Lenovo Iomega ix4-300d";
+	compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				adt7473@2e {
+					compatible = "adi,adt7473";
+					reg = <0x2e>;
+				};
+
+				eeprom@50 {
+					compatible = "atmel,24c64";
+					reg = <0x50>;
+				};
+
+				pcf8563@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+			};
+
+			nand-controller@d0000 {
+				status = "okay";
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x000e0000>;
+							read-only;
+						};
+
+						partition@e0000 {
+							label = "u-boot-env";
+							reg = <0x000e0000 0x00020000>;
+							read-only;
+						};
+
+						partition@100000 {
+							label = "u-boot-env2";
+							reg = <0x00100000 0x00020000>;
+							read-only;
+						};
+
+						partition@120000 {
+							label = "zImage";
+							reg = <0x00120000 0x00400000>;
+						};
+
+						partition@520000 {
+							label = "initrd";
+							reg = <0x00520000 0x00400000>;
+						};
+
+						partition@e00000 {
+							label = "boot";
+							reg = <0x00e00000 0x3f200000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin &reset_button_pin
+			&select_button_pin &scroll_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		select-button {
+			label = "Select Button";
+			linux,code = <BTN_SELECT>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		scroll-button {
+			label = "Scroll Button";
+			linux,code = <KEY_SCROLLDOWN>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi-3 {
+		compatible = "spi-gpio";
+		status = "okay";
+		sck-gpios  = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		mosi-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
+		cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&hdd_led_pin>;
+		pinctrl-names = "default";
+
+		hdd-led {
+			label = "ix4-300d:hdd:blue";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power-led {
+			label = "ix4-300d:power:white";
+			gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
+			/* init blinking while booting */
+			linux,default-trigger = "timer";
+			default-state = "on";
+		};
+
+		sysfail-led {
+			label = "ix4-300d:sysfail:red";
+			gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		sys-led {
+			label = "ix4-300d:sys:blue";
+			gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		hddfail-led {
+			label = "ix4-300d:hddfail:red";
+			gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+	};
+
+	/*
+	 * Warning: you need both eth1 & 0 PHY initialized (i.e having
+	 * them up does the tweak) for poweroff to shutdown otherwise it
+	 * reboots
+	 */
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff_pin>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+	};
+};
+&pciec {
+	status = "okay";
+
+	/* Quad port sata: Marvell 88SX7042 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* USB 3.0 xHCI controller: NEC D720200F1 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	poweroff_pin: poweroff-pin {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+	select_button_pin: select-button-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	scroll_button_pin: scroll-button-pin {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	hdd_led_pin: hdd-led-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
new file mode 100644
index 0000000000000..7a0614fd0c93a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT1900AC (Mamba).
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be
+ * used.
+ *
+ * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Based on armada-xp-axpwifiap.dts:
+ *
+ *     Copyright (C) 2013 Marvell
+ *
+ *     Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Linksys WRT1900AC";
+	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
+
+		internal-regs {
+
+			rtc@10300 {
+				/* No crystal connected to the internal RTC */
+				status = "disabled";
+			};
+
+			/* J10: VCC, NC, RX, NC, TX, GND  */
+			serial@12000 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			/* USB part of the eSATA/USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				tmp421@4c {
+					compatible = "ti,tmp421";
+					reg = <0x4c>;
+				};
+
+				tlc59116@68 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#gpio-cells = <2>;
+					compatible = "ti,tlc59116";
+					reg = <0x68>;
+
+					wan_amber@0 {
+						label = "mamba:amber:wan";
+						reg = <0x0>;
+					};
+
+					wan_white@1 {
+						label = "mamba:white:wan";
+						reg = <0x1>;
+					};
+
+					wlan_2g@2 {
+						label = "mamba:white:wlan_2g";
+						reg = <0x2>;
+					};
+
+					wlan_5g@3 {
+						label = "mamba:white:wlan_5g";
+						reg = <0x3>;
+					};
+
+					esata@4 {
+						label = "mamba:white:esata";
+						reg = <0x4>;
+						linux,default-trigger = "disk-activity";
+					};
+
+					usb2@5 {
+						label = "mamba:white:usb2";
+						reg = <0x5>;
+					};
+
+					usb3_1@6 {
+						label = "mamba:white:usb3_1";
+						reg = <0x6>;
+					};
+
+					usb3_2@7 {
+						label = "mamba:white:usb3_2";
+						reg = <0x7>;
+					};
+
+					wps_white@8 {
+						label = "mamba:white:wps";
+						reg = <0x8>;
+					};
+
+					wps_amber@9 {
+						label = "mamba:amber:wps";
+						reg = <0x9>;
+					};
+				};
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&keys_pin>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Factory Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&power_led_pin>;
+		pinctrl-names = "default";
+
+		led-power {
+			label = "mamba:white:power";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	pwm_fan {
+		/* SUNON HA4010V4-0000-C99 */
+
+		compatible = "pwm-fan";
+		pwms = <&gpio0 24 4000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Etron EJ168 USB 3.0 controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* First mini-PCIe port */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Second mini-PCIe port */
+	pcie@3,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+};
+
+&pinctrl {
+
+	keys_pin: keys-pin {
+		marvell,pins = "mpp32", "mpp33";
+		marvell,function = "gpio";
+	};
+
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	gpio_fan_pin: gpio-fan-pin {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan3";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "internet";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;  /* 1MB */
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u_env";
+				reg = <0x100000 0x40000>;    /* 256KB */
+			};
+
+			partition@140000 {
+				label = "s_env";
+				reg = <0x140000 0x40000>;    /* 256KB */
+			};
+
+			partition@900000 {
+				label = "devinfo";
+				reg = <0x900000 0x100000>;   /* 1MB */
+				read-only;
+			};
+
+			/* kernel1 overlaps with rootfs1 by design */
+			partition@a00000 {
+				label = "kernel1";
+				reg = <0xa00000 0x2800000>;  /* 40MB */
+			};
+
+			partition@d00000 {
+				label = "rootfs1";
+				reg = <0xd00000 0x2500000>;  /* 37MB */
+			};
+
+			/* kernel2 overlaps with rootfs2 by design */
+			partition@3200000 {
+				label = "kernel2";
+				reg = <0x3200000 0x2800000>; /* 40MB */
+			};
+
+			partition@3500000 {
+				label = "rootfs2";
+				reg = <0x3500000 0x2500000>; /* 37MB */
+			};
+
+			/*
+			 * 38MB, last MB is for the BBT, not writable
+			 */
+			partition@5a00000 {
+				label = "syscfg";
+				reg = <0x5a00000 0x2600000>;
+			};
+
+			/*
+			 * Unused area between "s_env" and "devinfo".
+			 * Moved here because otherwise the renumbered
+			 * partitions would break the bootloader
+			 * supplied bootargs
+			 */
+			partition@180000 {
+				label = "unused_area";
+				reg = <0x180000 0x780000>;   /* 7.5MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-matrix.dts b/arch/arm/boot/dts/marvell/armada-xp-matrix.dts
new file mode 100644
index 0000000000000..1395cea12759a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-matrix.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada XP Matrix board
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Matrix Board";
+	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/*
+		 * This board has 4 GB of RAM, but the last 256 MB of
+		 * RAM are not usable due to the overlap with the MBus
+		 * Window address range
+		 */
+		reg = <0 0x00000000 0 0xf0000000>;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy-mode = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/marvell/armada-xp-mv78230.dtsi
new file mode 100644
index 0000000000000..5ea9d509cd308
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-mv78230.dtsi
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78230 SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x1 only.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>;
+				clocks = <&coreclk 0>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78230-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/marvell/armada-xp-mv78260.dtsi
new file mode 100644
index 0000000000000..6c6fbb9faf5ac
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-mv78260.dtsi
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78260 SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x4 only.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie6: pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie7: pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie8: pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie9: pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78260-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/marvell/armada-xp-mv78460.dtsi
new file mode 100644
index 0000000000000..16185edf9aa5f
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-mv78460.dtsi
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78460 SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <2>;
+			clocks = <&cpuclk 2>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <3>;
+			clocks = <&cpuclk 3>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. Two units are
+		 * x4/x1.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie6: pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie7: pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie8: pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie9: pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie10: pcie@a,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+				reg = <0x5000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 103>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie10_intc 0>,
+						<0 0 0 2 &pcie10_intc 1>,
+						<0 0 0 3 &pcie10_intc 2>,
+						<0 0 0 4 &pcie10_intc 3>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 27>;
+				status = "disabled";
+
+				pcie10_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78460-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/marvell/armada-xp-netgear-rn2120.dts
new file mode 100644
index 0000000000000..31933f81144ea
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-netgear-rn2120.dts
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NETGEAR ReadyNAS 2120
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 2120";
+	compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				/* Controller for rear fan #1 of 3 (Protechnic
+				 * MGT4012XB-O20, 8000RPM) near eSATA port */
+				g762_fan1: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear (center) fan #2 of 3 */
+				g762_fan2: g762@48 {
+					compatible = "gmt,g762";
+					reg = <0x48>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear fan #3 of 3 */
+				g762_fan3: g762@49 {
+					compatible = "gmt,g762";
+					reg = <0x49>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/* Temperature sensor */
+				g751: g751@4c {
+					compatible = "gmt,g751";
+					reg = <0x4c>;
+				};
+
+				isl12057: rtc@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					wakeup-source;
+				};
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* Two rear eSATA ports */
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	clocks {
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
+			     &sata3_led_pin &sata4_led_pin>;
+		pinctrl-names = "default";
+
+		red-sata1-led {
+			label = "rn2120:red:sata1";
+			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata2-led {
+			label = "rn2120:red:sata2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata3-led {
+			label = "rn2120:red:sata3";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata4-led {
+			label = "rn2120:red:sata4";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-err-led {
+			label = "rn2120:red:err";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin &reset_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Connected to first Marvell 88SE9170 SATA controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to second Marvell 88SE9170 SATA controller */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Connected to Fresco Logic FL1009 USB 3.0 controller */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
+
+&pinctrl {
+	poweroff: poweroff {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	sata1_led_pin: sata1-led-pin {
+		marvell,pins = "mpp31";
+		marvell,function = "gpio";
+	};
+
+	sata2_led_pin: sata2-led-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	sata3_led_pin: sata3-led-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	sata4_led_pin: sata4-led-pin {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+
+	sata1_power_pin: sata1-power-pin {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	sata2_power_pin: sata2-power-pin {
+		marvell,pins = "mpp25";
+		marvell,function = "gpio";
+	};
+
+	sata3_power_pin: sata3-power-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+
+	sata4_power_pin: sata4-power-pin {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	sata3_pres_pin: sata3-pres-pin {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+
+	sata4_pres_pin: sata4-pres-pin {
+		marvell,pins = "mpp35";
+		marvell,function = "gpio";
+	};
+
+	err_led_pin: err-led-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		/* Use Hardware BCH ECC */
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x180000>;  /* 1.5MB */
+				read-only;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x20000>;    /* 128KB */
+				read-only;
+			};
+
+			partition@200000 {
+				label = "uImage";
+				reg = <0x0200000 0x600000>;    /* 6MB */
+			};
+
+			partition@800000 {
+				label = "minirootfs";
+				reg = <0x0800000 0x400000>;    /* 4MB */
+			};
+
+			/* Last MB is for the BBT, i.e. not writable */
+			partition@c00000 {
+				label = "ubifs";
+				reg = <0x0c00000 0x7400000>; /* 116MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/marvell/armada-xp-openblocks-ax3-4.dts
new file mode 100644
index 0000000000000..1ecf72a61bcad
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-openblocks-ax3-4.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for OpenBlocks AX3-4 board
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-xp-mv78260.dtsi"
+
+/ {
+	model = "PlatHome OpenBlocks AX3-4 board";
+	compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 128 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x8000000>;
+				bank-width = <2>;
+			};
+		};
+
+		internal-regs {
+			rtc@10300 {
+				/* No crystal connected to the internal RTC */
+				status = "disabled";
+			};
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+
+			leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&led_pins>;
+
+				red_led {
+					label = "red_led";
+					gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+
+				yellow_led {
+					label = "yellow_led";
+					gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+
+				green_led {
+					label = "green_led";
+					gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+					default-state = "keep";
+				};
+			};
+
+			gpio-keys {
+				compatible = "gpio-keys";
+
+				button-init {
+					label = "Init Button";
+					linux,code = <KEY_POWER>;
+					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <400000>;
+			};
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <400000>;
+
+				s35390a: s35390a@30 {
+					compatible = "s35390a";
+					reg = <0x30>;
+				};
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			/* Front side USB 0 */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* Front side USB 1 */
+			usb@51000 {
+				status = "okay";
+			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&pinctrl {
+	led_pins: led-pins-0 {
+		marvell,pins = "mpp49", "mpp51", "mpp53";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts
new file mode 100644
index 0000000000000..5551bac1962c2
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Synology DS414
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Synology DS414";
+	compatible = "synology,ds414", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+
+			/* RTC is provided by Seiko S-35390A below */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				s35390a: s35390a@30 {
+					 compatible = "sii,s35390a";
+					 reg = <0x30>;
+				};
+			};
+
+			/* Connected to a header on device's PCB. This
+			 * provides the main console for the device.
+			 *
+			 * Warning: the device may not boot with a 3.3V
+			 * USB-serial converter connected when the power
+			 * button is pressed. The converter needs to be
+			 * connected a few seconds after pressing the
+			 * power button. This is possibly due to UART0_TXD
+			 * pin being sampled at reset (bit 0 of SAR).
+			 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Connected to a Microchip PIC16F883 for power control */
+			serial@12100 {
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
+			     &sata3_pwr_pin &sata4_pwr_pin>;
+		pinctrl-names = "default";
+
+		sata1_regulator: sata1-regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata2_regulator: sata2-regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA2 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata3_regulator: sata3-regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "SATA3 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <6000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata4_regulator: sata4-regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "SATA4 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <8000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * Connected to Marvell 88SX7042 SATA-II controller
+	 * handling the four disks.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/*
+	 * Connected to EtronTech EJ168A XHCI controller
+	 * providing the two rear USB 3.0 ports.
+	 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1512 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	sata1_pwr_pin: sata1-pwr-pin {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	sata2_pwr_pin: sata2-pwr-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	sata3_pwr_pin: sata3-pwr-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+
+	sata4_pwr_pin: sata4-pwr-pin {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp35";
+		marvell,function = "gpio";
+	};
+
+	sata3_pres_pin: sata3-pres-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	sata4_pres_pin: sata4-pres-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit0_pin: syno-id-bit0-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit1_pin: syno-id-bit1-pin {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit2_pin: syno-id-bit2-pin {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	fan1_alarm_pin: fan1-alarm-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	fan2_alarm_pin: fan2-alarm-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@0 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000d0000>; /* 832KB */
+		};
+
+		partition@c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000d0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@3a0000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x003a0000 0x00430000>; /* 4250KB */
+		};
+
+		partition@7d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp.dtsi b/arch/arm/boot/dts/marvell/armada-xp.dtsi
new file mode 100644
index 0000000000000..4297482da62ff
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp.dtsi
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * Contains definitions specific to the Armada XP SoC that are not
+ * common to all Armada SoCs.
+ */
+
+#include "armada-370-xp.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		internal-regs {
+			sdramc: sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
+			L2: l2-cache@8000 {
+				compatible = "marvell,aurora-system-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-level = <2>;
+				cache-unified;
+				wt-override;
+			};
+
+			uart2: serial@12200 {
+				compatible = "snps,dw-apb-uart";
+				pinctrl-0 = <&uart2_pins>;
+				pinctrl-names = "default";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				interrupts = <43>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "snps,dw-apb-uart";
+				pinctrl-0 = <&uart3_pins>;
+				pinctrl-names = "default";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				interrupts = <44>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x500>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-xp-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18230 {
+				compatible = "marvell,armada-xp-core-clock";
+				reg = <0x18230 0x08>;
+				#clock-cells = <1>;
+			};
+
+			thermal: thermal@182b0 {
+				compatible = "marvell,armadaxp-thermal";
+				reg = <0x182b0 0x4
+					0x184d0 0x4>;
+				status = "okay";
+			};
+
+			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
+				compatible = "marvell,armada-xp-cpu-clock";
+				reg = <0x18700 0x24>, <0x1c054 0x10>;
+				clocks = <&coreclk 1>;
+			};
+
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
+			eth2: ethernet@30000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x30000 0x4000>;
+				interrupts = <12>;
+				clocks = <&gateclk 2>;
+				status = "disabled";
+			};
+
+			usb2: usb@52000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x52000 0x500>;
+				interrupts = <47>;
+				clocks = <&gateclk 20>;
+				status = "disabled";
+			};
+
+			xor1: xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			ethernet@70000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-xp-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <48>, <49>;
+				clocks = <&gateclk 23>, <&gateclk 23>;
+				clock-names = "cesa0", "cesa1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			bm: bm@c0000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc0000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
+			xor0: xor@f0900 {
+				compatible = "marvell,orion-xor";
+				reg = <0xF0900 0x100
+				       0xF0B00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
+
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11100 0x100>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
+};
+
+&pinctrl {
+	ge0_gmii_pins: ge0-gmii-pins {
+		marvell,pins =
+		     "mpp0",  "mpp1",  "mpp2",  "mpp3",
+		     "mpp4",  "mpp5",  "mpp6",  "mpp7",
+		     "mpp8",  "mpp9",  "mpp10", "mpp11",
+		     "mpp12", "mpp13", "mpp14", "mpp15",
+		     "mpp16", "mpp17", "mpp18", "mpp19",
+		     "mpp20", "mpp21", "mpp22", "mpp23";
+		marvell,function = "ge0";
+	};
+
+	ge0_rgmii_pins: ge0-rgmii-pins {
+		marvell,pins =
+		     "mpp0", "mpp1", "mpp2", "mpp3",
+		     "mpp4", "mpp5", "mpp6", "mpp7",
+		     "mpp8", "mpp9", "mpp10", "mpp11";
+		marvell,function = "ge0";
+	};
+
+	ge1_rgmii_pins: ge1-rgmii-pins {
+		marvell,pins =
+		     "mpp12", "mpp13", "mpp14", "mpp15",
+		     "mpp16", "mpp17", "mpp18", "mpp19",
+		     "mpp20", "mpp21", "mpp22", "mpp23";
+		marvell,function = "ge1";
+	};
+
+	sdio_pins: sdio-pins {
+		marvell,pins = "mpp30", "mpp31", "mpp32",
+			       "mpp33", "mpp34", "mpp35";
+		marvell,function = "sd0";
+	};
+
+	spi0_pins: spi0-pins {
+		marvell,pins = "mpp36", "mpp37",
+			       "mpp38", "mpp39";
+		marvell,function = "spi0";
+	};
+
+	spi1_pins: spi1-pins {
+		marvell,pins = "mpp13", "mpp14",
+			       "mpp16", "mpp17";
+		marvell,function = "spi1";
+	};
+
+	uart2_pins: uart2-pins {
+		marvell,pins = "mpp42", "mpp43";
+		marvell,function = "uart2";
+	};
+
+	uart3_pins: uart3-pins {
+		marvell,pins = "mpp44", "mpp45";
+		marvell,function = "uart3";
+	};
+};
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
new file mode 100644
index 0000000000000..1082fdfbfe60d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
@@ -0,0 +1,203 @@
+/*
+ * Device Tree include for Compulab CM-A510 System-on-Module
+ *
+ * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The CM-A510 comes with several optional components:
+ *
+ * Memory options:
+ *  D512: 512M
+ *  D1024: 1G
+ *
+ * NAND options:
+ *  N512: 512M NAND
+ *
+ * Ethernet options:
+ *  E1: PHY RTL8211D on internal GbE (SMI address 0x03)
+ *  E2: Additional ethernet NIC RTL8111D on PCIe1
+ *
+ * Audio options:
+ *  A: TI TLV320AIC23b audio codec (I2C address 0x1a)
+ *
+ * Touchscreen options:
+ *  I: TI TSC2046 touchscreen controller (on SPI1)
+ *
+ * USB options:
+ *  U2: 2 dual-role USB2.0 ports
+ *  U4: 2 additional USB2.0 host ports (via USB1)
+ *
+ * WiFi options:
+ *  W: Broadcom BCM4319 802.11b/g/n (USI WM-N-BM-01 on SDIO1)
+ *
+ * GPIOs used on CM-A510:
+ *   1 GbE PHY reset (active low)
+ *   3 WakeUp
+ *   8 PowerOff (active low)
+ *  13 Touchscreen pen irq (active low)
+ *  65 System LED (active high)
+ *  69 USB Hub reset (active low)
+ *  70 WLAN reset (active low)
+ *  71 WLAN regulator (active high)
+ */
+
+#include "dove.dtsi"
+
+/ {
+	model = "Compulab CM-A510";
+	compatible = "compulab,cm-a510", "marvell,dove";
+
+	/*
+	 * Set the minimum memory size here and let the
+	 * bootloader set the real size.
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		/* Set upper NAND data bit to GPO */
+		pinctrl-0 = <&pmx_nand_gpo>;
+		pinctrl-names = "default";
+
+		led-system {
+			label = "cm-a510:system:green";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wifi_power: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "WiFi Power";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Optional RTL8211D GbE PHY on SMI address 0x03 */
+&mdio {
+	ethphy: ethernet-phy@3 {
+		reg = <3>;
+		status = "disabled";
+	};
+};
+
+&eth {
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c0 {
+	/* Optional TI TLV320AIC23b audio codec */
+	opt_audio: audio@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		status = "disabled";
+	};
+};
+
+/* Optional RTL8111D GbE NIC on PCIe1 */
+&pcie { status = "disabled"; };
+
+&pcie1 {
+	pinctrl-0 = <&pmx_pcie1_clkreq>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&pinctrl {
+	pmx_uart2: pmx-uart2 {
+		marvell,pins = "mpp14", "mpp15";
+		marvell,function = "uart2";
+	};
+};
+
+/* Optional Broadcom BCM4319 802.11b/g/n WiFi module */
+&sdio1 {
+	non-removable;
+	vmmc-supply = <&wifi_power>;
+	reset-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&spi0 {
+	status = "okay";
+
+	/* 1M Flash Winbond W25Q80BL */
+	flash@0 {
+		compatible = "winbond,w25q80";
+		spi-max-frequency = <80000000>;
+		reg = <0>;
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&pmx_spi1_20_23>;
+	pinctrl-names = "default";
+	status = "disabled";
+
+	/* Optional TI TSC2046 touchscreen controller */
+	opt_touch: touchscreen@0 {
+		compatible = "ti,tsc2046";
+		spi-max-frequency = <2500000>;
+		reg = <0>;
+		pinctrl-0 = <&pmx_gpio_13>;
+		pinctrl-names = "default";
+		interrupts-extended = <&gpio0 13 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&pmx_uart2>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/marvell/dove-cubox-es.dts b/arch/arm/boot/dts/marvell/dove-cubox-es.dts
new file mode 100644
index 0000000000000..ad361ec1361de
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/dove-cubox-es.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "dove-cubox.dts"
+
+/ {
+	model = "SolidRun CuBox (Engineering Sample)";
+	compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove";
+};
+
+&sdio0 {
+	/* sdio0 card detect is connected to wrong pin on CuBox ES */
+	cd-gpios = <&gpio0 12 1>;
+	pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
+};
diff --git a/arch/arm/boot/dts/marvell/dove-cubox.dts b/arch/arm/boot/dts/marvell/dove-cubox.dts
new file mode 100644
index 0000000000000..dbba0c8cdab1a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/dove-cubox.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "SolidRun CuBox";
+	compatible = "solidrun,cubox", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_18>;
+		pinctrl-names = "default";
+
+		led-power {
+			label = "Power";
+			gpios = <&gpio0 18 1>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 1 0>;
+			pinctrl-0 = <&pmx_gpio_1>;
+			pinctrl-names = "default";
+		};
+	};
+
+	clocks {
+		/* 25MHz reference crystal */
+		ref25: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 19 1>;
+		pinctrl-0 = <&pmx_gpio_19>;
+		pinctrl-names = "default";
+	};
+
+	gpu-subsystem {
+		status = "okay";
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth {
+	status = "okay";
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		compatible = "marvell,88e1310";
+		reg = <1>;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	si5351: clock-generator@60 {
+		compatible = "silabs,si5351a-msop";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#clock-cells = <1>;
+
+		/* connect xtal input to 25MHz reference */
+		clocks = <&ref25>;
+		clock-names = "xtal";
+
+		/* connect xtal input as source of pll0 and pll1 */
+		silabs,pll-source = <0 0>, <1 0>;
+
+		clkout0 {
+			reg = <0>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <0>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+		};
+
+		clkout2 {
+			reg = <2>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+		};
+	};
+};
+
+&sdio0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&audio1 {
+	status = "okay";
+	clocks = <&gate_clk 13>, <&si5351 2>;
+	clock-names = "internal", "extclk";
+	pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/marvell/dove-d2plug.dts b/arch/arm/boot/dts/marvell/dove-d2plug.dts
new file mode 100644
index 0000000000000..79ee2b32409d5
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/dove-d2plug.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D2Plug";
+	compatible = "globalscale,d2plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		led-wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 0 1>;
+		};
+
+		led-wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 1 1>;
+		};
+
+		led-bluetooth-act {
+			label = "bt-act";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Macronix MX25L3205D */
+	flash@0 {
+		compatible = "st,m25l3205d";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/dove-d3plug.dts b/arch/arm/boot/dts/marvell/dove-d3plug.dts
new file mode 100644
index 0000000000000..5aa5d4a7d51d7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/dove-d3plug.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D3Plug";
+	compatible = "globalscale,d3plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		led-wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 0 1>;
+		};
+
+		led-wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 1 1>;
+		};
+
+		led-status {
+			label = "status";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 8 0>;
+			pinctrl-0 = <&pmx_gpio_8>;
+			pinctrl-names = "default";
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 2M Flash Macronix MX25L1605D */
+	flash@0 {
+		compatible = "st,m25l1605d";
+		spi-max-frequency = <86000000>;
+		reg = <0>;
+	};
+};
+
+&pcie {
+	status = "okay";
+	/* Fresco Logic USB3.0 xHCI controller */
+	pcie@1 {
+		status = "okay";
+		reset-gpios = <&gpio0 26 1>;
+		reset-delay-us = <20000>;
+		pinctrl-0 = <&pmx_camera_gpio>;
+		pinctrl-names = "default";
+	};
+	/* Mini-PCIe slot */
+	pcie@2 {
+		status = "okay";
+		reset-gpios = <&gpio0 25 1>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/dove-dove-db.dts b/arch/arm/boot/dts/marvell/dove-dove-db.dts
new file mode 100644
index 0000000000000..c1912dc6bfc35
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/dove-dove-db.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Marvell DB-MV88AP510-BP Development Board";
+	compatible = "marvell,dove-db", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
+	flash@0 {
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/dove-sbc-a510.dts b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
new file mode 100644
index 0000000000000..df021f9b01176
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
@@ -0,0 +1,183 @@
+/*
+ * Device Tree file for Compulab SBC-A510 Single Board Computer
+ *
+ * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * SBC-A510 comprises a PCA9555 I2C GPIO expander its GPIO lines connected to
+ *
+ * 0.0 USB0 VBUS_EN (active high)
+ * 0.1 USB0 VBUS_GOOD
+ * 0.2 DVI transmitter TI TFP410 MSEN
+ * 0.3 DVI transmitter TI TFP410 PD# (active low power down)
+ * 0.4 LVDS transmitter DS90C365 PD# (active low power down)
+ * 0.5 LCD nRST (active low reset)
+ * 0.6 PCIe0 nRST (active low reset)
+ * 0.7 mini-PCIe slot W_DISABLE#
+ *
+ * 1.0 MMC WP
+ * 1.1 Camera Input FPC FLASH_STB and P21.5
+ * 1.2 Camera Input FPC WE        and P21.22
+ * 1.3 MMC VCC_EN (active high)   and P21.7
+ * 1.4 Camera Input FPC AFTR_RST  and P21.17
+ * 1.5 Camera Input FPC OE        and P21.19
+ * 1.6 Camera Input FPC SNPSHT    and P21.6
+ * 1.7 Camera Input FPC SHTR      and P21.10
+ */
+
+/dts-v1/;
+
+#include "dove-cm-a510.dtsi"
+
+/ {
+	model = "Compulab SBC-A510";
+	compatible = "compulab,sbc-a510", "compulab,cm-a510", "marvell,dove";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	regulators {
+		usb0_power: regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		mmc_power: regulator@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "MMC Power";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Ethernet0 depends on CM-A510 option E1 */
+&mdio { status = "disabled"; };
+&eth { status = "disabled"; };
+&ethphy { status = "disabled"; };
+
+/*
+ * USB port 0 can be powered and monitored by I2C GPIO expander:
+ *  VBUS_ENABLE on GPIO0, VBUS_GOOD on GPIO1
+ */
+&ehci0 {
+	status = "okay";
+	vbus-supply = <&usb0_power>;
+};
+
+/* USB port 1 (and ports 2, 3 if CM-A510 has U4 option) */
+&ehci1 { status = "okay"; };
+
+/*
+ * I2C bus layout:
+ * i2c0:
+ *  - Audio Codec, 0x1a (option from CM-A510)
+ *  - DVI transmitter TI TFP410, 0x39
+ *  - HDMI/DVI DDC channel
+ * i2c1:
+ *  - GPIO expander, NXP PCA9555, 0x20
+ *  - VGA DDC channel
+ */
+&i2c {
+	pinctrl-0 = <&pmx_i2c1>;
+	pinctrl-names = "default";
+};
+
+&i2c0 {
+	/* TI TFP410 DVI transmitter */
+	dvi: video@39 {
+		compatible = "ti,tfp410";
+		reg = <0x39>;
+		powerdown-gpio = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* NXP PCA9555 GPIO expander */
+	gpio_ext: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&pcie { status = "okay"; };
+
+/*
+ * PCIe0 can be configured by Jumper E1 to be either connected to
+ * a mini-PCIe slot or a Pericom PI7C9X111 PCIe-to-PCI bridge.
+ */
+&pcie0 {
+	status = "okay";
+	pinctrl-0 = <&pmx_pcie0_clkreq>;
+	pinctrl-names = "default";
+	reset-gpios = <&gpio_ext 6 GPIO_ACTIVE_LOW>;
+};
+
+/* Ethernet1 depends on CM-A510 option E2 */
+&pcie1 { status = "disabled"; };
+
+/* SATA connector */
+&sata0 { status = "okay"; };
+
+/*
+ * SDIO0 is connected to a MMC/SD/SDIO socket, I2C GPIO expander has
+ *  VCC_MMC_ENABLE on GPIO13, MMC_WP on GPIO10
+ */
+&sdio0 {
+	vmmc-supply = <&mmc_power>;
+	wp-gpios = <&gpio_ext 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* UART0 on RS232 mini-connector */
+&uart0 { status = "okay"; };
+/* UART2 on pin headers */
+&uart2 { status = "okay"; };
diff --git a/arch/arm/boot/dts/marvell/dove.dtsi b/arch/arm/boot/dts/marvell/dove.dtsi
new file mode 100644
index 0000000000000..062c86361640f
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/dove.dtsi
@@ -0,0 +1,820 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "marvell,dove";
+	model = "Marvell Armada 88AP510 SoC";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "marvell,pj4a", "marvell,sheeva-v7";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+	};
+
+	l2: l2-cache {
+		compatible = "marvell,tauros2-cache";
+		marvell,tauros2-cache-features = <0>;
+	};
+
+	gpu-subsystem {
+		compatible = "marvell,dove-gpu-subsystem";
+		cores = <&gpu>;
+		status = "disabled";
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c>;
+
+		pinctrl-names = "i2c0", "i2c1", "i2c2";
+		pinctrl-0 = <&pmx_i2cmux_0>;
+		pinctrl-1 = <&pmx_i2cmux_1>;
+		pinctrl-2 = <&pmx_i2cmux_2>;
+
+		i2c0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+		};
+
+		i2c1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Requires pmx_i2c1 on i2c controller node */
+			status = "disabled";
+		};
+
+		i2c2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Requires pmx_i2c2 on i2c controller node */
+			status = "disabled";
+		};
+	};
+
+	mbus {
+		compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */
+		pcie-io-aperture  = <0xf2000000 0x00200000>; /*   2M I/O space */
+
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000   /* MBUS regs  1M */
+			  MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000   /* AXI  regs 16M */
+			  MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000   /* BootROM  128M */
+			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
+			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
+
+		pcie: pcie {
+			compatible = "marvell,dove-pcie";
+			status = "disabled";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&intc>;
+			bus-range = <0x00 0xff>;
+
+			ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
+			          0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
+				  0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0   /* Port 0.0 Mem */
+				  0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0   /* Port 0.0 I/O */
+				  0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
+				  0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
+
+			pcie0: pcie@1 {
+				device_type = "pci";
+				status = "disabled";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				clocks = <&gate_clk 4>;
+				marvell,pcie-port = <0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+				          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+
+				#interrupt-cells = <1>;
+				interrupt-names = "intx", "error";
+				interrupts = <16>, <15>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie1: pcie@2 {
+				device_type = "pci";
+				status = "disabled";
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				clocks = <&gate_clk 5>;
+				marvell,pcie-port = <1>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+				          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+
+				#interrupt-cells = <1>;
+				interrupt-names = "intx", "error";
+				interrupts = <18>, <17>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000   /* MBUS regs  1M */
+				  0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000   /* AXI  regs 16M */
+				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
+				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
+
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <6>;
+				reg = <0x10600 0x28>;
+				clocks = <&core_clk 0>;
+				pinctrl-0 = <&pmx_spi0>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <11>;
+				clock-frequency = <400000>;
+				clocks = <&core_clk 0>;
+				status = "okay";
+			};
+
+			uart0: serial@12000 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <7>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&core_clk 0>;
+				pinctrl-0 = <&pmx_uart1>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart2: serial@12200 {
+				compatible = "ns16550a";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "ns16550a";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@14600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <5>;
+				reg = <0x14600 0x28>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			mbusc: mbus-ctrl@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x80>, <0x800100 0x8>;
+			};
+
+			sysc: system-ctrl@20000 {
+				compatible = "marvell,orion-system-controller";
+				reg = <0x20000 0x110>;
+			};
+
+			bridge_intc: bridge-interrupt-ctrl@20110 {
+				compatible = "marvell,orion-bridge-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20110 0x8>;
+				interrupts = <0>;
+				marvell,#interrupts = <5>;
+			};
+
+			intc: interrupt-controller@20200 {
+				compatible = "marvell,orion-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20200 0x10>, <0x20210 0x10>;
+			};
+
+			timer: timer@20300 {
+				compatible = "marvell,orion-timer";
+				reg = <0x20300 0x20>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <1>, <2>;
+				clocks = <&core_clk 0>;
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,orion-wdt";
+				reg = <0x20300 0x28>, <0x20108 0x4>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <3>;
+				clocks = <&core_clk 0>;
+			};
+
+			crypto: crypto-engine@30000 {
+				compatible = "marvell,dove-crypto";
+				reg = <0x30000 0x10000>;
+				reg-names = "regs";
+				interrupts = <31>;
+				clocks = <&gate_clk 15>;
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x800>;
+				status = "okay";
+			};
+
+			ehci0: usb-host@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x1000>;
+				interrupts = <24>;
+				clocks = <&gate_clk 0>;
+				status = "okay";
+			};
+
+			ehci1: usb-host@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x1000>;
+				interrupts = <25>;
+				clocks = <&gate_clk 1>;
+				status = "okay";
+			};
+
+			xor0: dma-engine@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gate_clk 23>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <39>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <40>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			xor1: dma-engine@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gate_clk 24>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <42>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <43>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			sdio1: sdio-host@90000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x90000 0x100>;
+				interrupts = <36>, <38>;
+				clocks = <&gate_clk 9>;
+				pinctrl-0 = <&pmx_sdio1>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			eth: ethernet-ctrl@72000 {
+				compatible = "marvell,orion-eth";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72000 0x4000>;
+				clocks = <&gate_clk 2>;
+				marvell,tx-checksum-limit = <1600>;
+				status = "disabled";
+
+				ethernet-port@0 {
+					compatible = "marvell,orion-eth-port";
+					reg = <0>;
+					interrupts = <29>;
+					/* overwrite MAC address in bootloader */
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+
+			mdio: mdio-bus@72004 {
+				compatible = "marvell,orion-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72004 0x84>;
+				interrupts = <30>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+
+			sdio0: sdio-host@92000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x92000 0x100>;
+				interrupts = <35>, <37>;
+				clocks = <&gate_clk 8>;
+				pinctrl-0 = <&pmx_sdio0>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sata0: sata-host@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x2400>;
+				interrupts = <62>;
+				clocks = <&gate_clk 3>;
+				phys = <&sata_phy0>;
+				phy-names = "port0";
+				nr-ports = <1>;
+				status = "disabled";
+			};
+
+			sata_phy0: sata-phy@a2000 {
+				compatible = "marvell,mvebu-sata-phy";
+				reg = <0xa2000 0x0334>;
+				clocks = <&gate_clk 3>;
+				clock-names = "sata";
+				#phy-cells = <0>;
+				status = "okay";
+			};
+
+			audio0: audio-controller@b0000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb0000 0x2210>;
+				interrupts = <19>, <20>;
+				clocks = <&gate_clk 12>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			audio1: audio-controller@b4000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb4000 0x2210>;
+				interrupts = <21>, <22>;
+				clocks = <&gate_clk 13>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			pmu: power-management@d0000 {
+				compatible = "marvell,dove-pmu", "simple-bus";
+				reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+				ranges = <0x00000000 0x000d0000 0x8000
+					  0x00008000 0x000d8000 0x8000>;
+				interrupts = <33>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#interrupt-cells = <1>;
+				#reset-cells = <1>;
+
+				domains {
+					vpu_domain: vpu-domain {
+						#power-domain-cells = <0>;
+						marvell,pmu_pwr_mask = <0x00000008>;
+						marvell,pmu_iso_mask = <0x00000001>;
+						resets = <&pmu 16>;
+					};
+
+					gpu_domain: gpu-domain {
+						#power-domain-cells = <0>;
+						marvell,pmu_pwr_mask = <0x00000004>;
+						marvell,pmu_iso_mask = <0x00000002>;
+						resets = <&pmu 18>;
+					};
+				};
+
+				thermal: thermal-diode@1c {
+					compatible = "marvell,dove-thermal";
+					reg = <0x001c 0x0c>, <0x005c 0x08>;
+				};
+
+				gate_clk: clock-gating-ctrl@38 {
+					compatible = "marvell,dove-gating-clock";
+					reg = <0x0038 0x4>;
+					clocks = <&core_clk 0>;
+					#clock-cells = <1>;
+				};
+
+				divider_clk: core-clock@64 {
+					compatible = "marvell,dove-divider-clock";
+					reg = <0x0064 0x8>;
+					#clock-cells = <1>;
+				};
+
+				pinctrl: pin-ctrl@200 {
+					compatible = "marvell,dove-pinctrl";
+					reg = <0x0200 0x14>,
+					      <0x0440 0x04>;
+					clocks = <&gate_clk 22>;
+
+					pmx_gpio_0: pmx-gpio-0 {
+						marvell,pins = "mpp0";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_1: pmx-gpio-1 {
+						marvell,pins = "mpp1";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_2: pmx-gpio-2 {
+						marvell,pins = "mpp2";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_3: pmx-gpio-3 {
+						marvell,pins = "mpp3";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_4: pmx-gpio-4 {
+						marvell,pins = "mpp4";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_5: pmx-gpio-5 {
+						marvell,pins = "mpp5";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_6: pmx-gpio-6 {
+						marvell,pins = "mpp6";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_7: pmx-gpio-7 {
+						marvell,pins = "mpp7";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_8: pmx-gpio-8 {
+						marvell,pins = "mpp8";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_9: pmx-gpio-9 {
+						marvell,pins = "mpp9";
+						marvell,function = "gpio";
+					};
+
+					pmx_pcie1_clkreq: pmx-pcie1-clkreq {
+						marvell,pins = "mpp9";
+						marvell,function = "pex1";
+					};
+
+					pmx_gpio_10: pmx-gpio-10 {
+						marvell,pins = "mpp10";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_11: pmx-gpio-11 {
+						marvell,pins = "mpp11";
+						marvell,function = "gpio";
+					};
+
+					pmx_pcie0_clkreq: pmx-pcie0-clkreq {
+						marvell,pins = "mpp11";
+						marvell,function = "pex0";
+					};
+
+					pmx_gpio_12: pmx-gpio-12 {
+						marvell,pins = "mpp12";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_13: pmx-gpio-13 {
+						marvell,pins = "mpp13";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_extclk: pmx-audio1-extclk {
+						marvell,pins = "mpp13";
+						marvell,function = "audio1";
+					};
+
+					pmx_gpio_14: pmx-gpio-14 {
+						marvell,pins = "mpp14";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_15: pmx-gpio-15 {
+						marvell,pins = "mpp15";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_16: pmx-gpio-16 {
+						marvell,pins = "mpp16";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_17: pmx-gpio-17 {
+						marvell,pins = "mpp17";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_18: pmx-gpio-18 {
+						marvell,pins = "mpp18";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_19: pmx-gpio-19 {
+						marvell,pins = "mpp19";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_20: pmx-gpio-20 {
+						marvell,pins = "mpp20";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_21: pmx-gpio-21 {
+						marvell,pins = "mpp21";
+						marvell,function = "gpio";
+					};
+
+					pmx_camera: pmx-camera {
+						marvell,pins = "mpp_camera";
+						marvell,function = "camera";
+					};
+
+					pmx_camera_gpio: pmx-camera-gpio {
+						marvell,pins = "mpp_camera";
+						marvell,function = "gpio";
+					};
+
+					pmx_sdio0: pmx-sdio0 {
+						marvell,pins = "mpp_sdio0";
+						marvell,function = "sdio0";
+					};
+
+					pmx_sdio0_gpio: pmx-sdio0-gpio {
+						marvell,pins = "mpp_sdio0";
+						marvell,function = "gpio";
+					};
+
+					pmx_sdio1: pmx-sdio1 {
+						marvell,pins = "mpp_sdio1";
+						marvell,function = "sdio1";
+					};
+
+					pmx_sdio1_gpio: pmx-sdio1-gpio {
+						marvell,pins = "mpp_sdio1";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_gpio: pmx-audio1-gpio {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "i2s1/spdifo";
+					};
+
+					pmx_spi0: pmx-spi0 {
+						marvell,pins = "mpp_spi0";
+						marvell,function = "spi0";
+					};
+
+					pmx_spi0_gpio: pmx-spi0-gpio {
+						marvell,pins = "mpp_spi0";
+						marvell,function = "gpio";
+					};
+
+					pmx_spi1_4_7: pmx-spi1-4-7 {
+						marvell,pins = "mpp4", "mpp5",
+							"mpp6", "mpp7";
+						marvell,function = "spi1";
+					};
+
+					pmx_spi1_20_23: pmx-spi1-20-23 {
+						marvell,pins = "mpp20", "mpp21",
+							"mpp22", "mpp23";
+						marvell,function = "spi1";
+					};
+
+					pmx_uart1: pmx-uart1 {
+						marvell,pins = "mpp_uart1";
+						marvell,function = "uart1";
+					};
+
+					pmx_uart1_gpio: pmx-uart1-gpio {
+						marvell,pins = "mpp_uart1";
+						marvell,function = "gpio";
+					};
+
+					pmx_nand: pmx-nand {
+						marvell,pins = "mpp_nand";
+						marvell,function = "nand";
+					};
+
+					pmx_nand_gpo: pmx-nand-gpo {
+						marvell,pins = "mpp_nand";
+						marvell,function = "gpo";
+					};
+
+					pmx_i2c1: pmx-i2c1 {
+						marvell,pins = "mpp17", "mpp19";
+						marvell,function = "twsi";
+					};
+
+					pmx_i2c2: pmx-i2c2 {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "twsi";
+					};
+
+					pmx_ssp_i2c2: pmx-ssp-i2c2 {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "ssp/twsi";
+					};
+
+					pmx_i2cmux_0: pmx-i2cmux-0 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt1";
+					};
+
+					pmx_i2cmux_1: pmx-i2cmux-1 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt2";
+					};
+
+					pmx_i2cmux_2: pmx-i2cmux-2 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt3";
+					};
+				};
+
+				core_clk: core-clocks@214 {
+					compatible = "marvell,dove-core-clock";
+					reg = <0x0214 0x4>;
+					#clock-cells = <1>;
+				};
+
+				gpio0: gpio-ctrl@400 {
+					compatible = "marvell,orion-gpio";
+					#gpio-cells = <2>;
+					gpio-controller;
+					reg = <0x0400 0x20>;
+					ngpios = <32>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupt-parent = <&intc>;
+					interrupts = <12>, <13>, <14>, <60>;
+				};
+
+				gpio1: gpio-ctrl@420 {
+					compatible = "marvell,orion-gpio";
+					#gpio-cells = <2>;
+					gpio-controller;
+					reg = <0x0420 0x20>;
+					ngpios = <32>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupt-parent = <&intc>;
+					interrupts = <61>;
+				};
+
+				rtc: real-time-clock@8500 {
+					compatible = "marvell,orion-rtc";
+					reg = <0x8500 0x20>;
+					interrupts = <5>;
+				};
+			};
+
+			gconf: global-config@e802c {
+				compatible = "marvell,dove-global-config",
+				             "syscon";
+				reg = <0xe802c 0x14>;
+			};
+
+			gpio2: gpio-ctrl@e8400 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xe8400 0x0c>;
+				ngpios = <8>;
+			};
+
+			lcd1: lcd-controller@810000 {
+				compatible = "marvell,dove-lcd";
+				reg = <0x810000 0x1000>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			lcd0: lcd-controller@820000 {
+				compatible = "marvell,dove-lcd";
+				reg = <0x820000 0x1000>;
+				interrupts = <47>;
+				status = "disabled";
+			};
+
+			crypto_sram: sram@ffffe000 {
+				compatible = "mmio-sram";
+				reg = <0xffffe000 0x800>;
+				clocks = <&gate_clk 15>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			gpu: gpu@840000 {
+				clocks = <&divider_clk 1>;
+				clock-names = "core";
+				compatible = "vivante,gc";
+				interrupts = <48>;
+				power-domains = <&gpu_domain>;
+				reg = <0x840000 0x4000>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts b/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
new file mode 100644
index 0000000000000..b1749d3f60b7b
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Endian 4i Edge 200 Board Description
+ * Note: Endian UTM Mini is hardware clone of Endian Edge 200
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Endian 4i Edge 200";
+	compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_SD;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth0port {
+	speed = <1000>;
+	duplex = <1>;
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&eth1port {
+	phy-handle = <&ethphyb>;
+};
+
+&mdio {
+	status = "okay";
+
+	ethphyb: ethernet-phy@b {
+		reg = <0x0b>;
+
+		marvell,reg-init =
+			/* link-activity, bi-color mode 4 */
+			<3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
+	};
+
+	switch0: switch@11 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x11>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "port1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "port2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "port3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "port4";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0port>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x000a0000>;
+		read-only;
+	};
+
+	partition@a0000 {
+		label = "u-boot-env";
+		reg = <0x000a0000 0x00060000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "kernel";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "ubi";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_sysrst>;
+	pinctrl-names = "default";
+
+	pmx_sysrst: pmx-sysrst {
+		marvell,pins = "mpp6";
+		marvell,function = "sysrst";
+	};
+
+	pmx_sdio_cd: pmx-sdio-cd {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	pmx_led: pmx-led {
+		marvell,pins = "mpp34", "mpp35", "mpp49";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
+
+&sdio {
+	pinctrl-0 = <&pmx_sdio_cd>;
+	pinctrl-names = "default";
+	status = "okay";
+	cd-gpios = <&gpio0 28 9>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-6192.dtsi b/arch/arm/boot/dts/marvell/kirkwood-6192.dtsi
new file mode 100644
index 0000000000000..705c0d7effed0
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-6192.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	mbus@f1000000 {
+		pciec: pcie@82000000 {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,88f6192-pinctrl";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
+		};
+
+		rtc: rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata: sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
+			status = "disabled";
+		};
+
+		sdio: mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-6281.dtsi b/arch/arm/boot/dts/marvell/kirkwood-6281.dtsi
new file mode 100644
index 0000000000000..8e311165fd130
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-6281.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	mbus@f1000000 {
+		pciec: pcie@82000000 {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,88f6281-pinctrl";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
+		};
+
+		rtc: rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata: sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
+			status = "disabled";
+		};
+
+		sdio: mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-6282.dtsi
new file mode 100644
index 0000000000000..e33723160ce7c
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-6282.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	mbus@f1000000 {
+		pciec: pcie@82000000 {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+			        0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie1: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-names = "intx", "error";
+				interrupts = <10>, <45>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 18>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+	};
+	ocp@f1000000 {
+
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,88f6282-pinctrl";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+
+			/*
+			 * Default I2C1 pinctrl setting on mpp36/mpp37,
+			 * overwrite marvell,pins on board level if required.
+			 */
+			pmx_twsi1: pmx-twsi1 {
+				marvell,pins = "mpp36", "mpp37";
+				marvell,function = "twsi1";
+			};
+
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
+		};
+
+		thermal: thermal@10078 {
+			compatible = "marvell,kirkwood-thermal";
+			reg = <0x10078 0x4>;
+			status = "okay";
+		};
+
+		rtc: rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		i2c1: i2c@11100 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11100 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <32>;
+			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_twsi1>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		sata: sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
+			status = "disabled";
+		};
+
+		sdio: mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/marvell/kirkwood-98dx4122.dtsi
new file mode 100644
index 0000000000000..c3469a2fc58a0
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-98dx4122.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	mbus@f1000000 {
+		pciec: pcie@82000000 {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,98dx4122-pinctrl";
+
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-b3.dts b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
new file mode 100644
index 0000000000000..681343c1357a9
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Excito Bubba B3
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ *
+ * Note: This requires a new'ish version of u-boot, which disables the
+ * L2 cache. If your B3 silently fails to boot, u-boot is probably too
+ * old. Either upgrade, or consider the following email:
+ *
+ * https://lists.debian.org/debian-arm/2012/08/msg00128.html
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Excito B3";
+	compatible = "excito,b3", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+	memory { /* 512 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led-green {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_red: pmx-led-red {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_blue: pmx-led-blue {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_beeper: pmx-beeper {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p16@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p16", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0xc0000>;
+					label = "u-boot";
+				};
+
+				partition@c0000 {
+					reg = <0xc0000 0x20000>;
+					label = "u-boot env";
+				};
+
+				partition@e0000 {
+					reg = <0xe0000 0x120000>;
+					label = "data";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+			/*
+			 * There is something on the bus at address 0x64.
+			 * Not yet identified what it is, maybe the eeprom
+			 * for the Atheros WiFi chip?
+			 */
+		};
+
+
+		serial@12000 {
+			/* Internal on test pins, 3.3v TTL
+		 	 * UART0_RX = Testpoint 65
+			 * UART0_TX = Testpoint 66
+			 * See the Excito Wiki for more details.
+		 	 */
+			status = "okay";
+		};
+
+		sata@80000 {
+			/* One internal, the second as eSATA */
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-leds {
+		/*
+		 * There is one LED "port" on the front and the colours
+		 * mix together giving some interesting combinations.
+		 */
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_green &pmx_led_red
+			      &pmx_led_blue >;
+		pinctrl-names = "default";
+
+		programming_led {
+			label = "bubba3:green:programming";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		error_led {
+			label = "bubba3:red:error";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		active_led {
+			label = "bubba3:blue:active";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_power>;
+		pinctrl-names = "default";
+
+		power-button {
+			/* On the back */
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	beeper: beeper {
+		/* 4KHz Piezoelectric buzzer */
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pmx_beeper>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@24 {
+		device_type = "ethernet-phy";
+		reg = <24>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
+/* Wifi model has Atheros chipset on pcie port */
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
new file mode 100644
index 0000000000000..07fbfca444d5a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Seagate Blackarmor NAS220
+ *
+ * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "Seagate Blackarmor NAS220";
+	compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
+		     "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		button {
+			label = "Power";
+			linux,code = <KEY_SLEEP>;
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue-power {
+			label = "nas220:blue:power";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/*
+ * Serial port routed to connector CN5
+ *
+ * pin 1 - TX (CPU's TX)
+ * pin 4 - RX (CPU's RX)
+ * pin 6 - GND
+ */
+&uart0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_button_reset &pmx_button_power>;
+	pinctrl-names = "default";
+
+	pmx_act_sata0: pmx-act-sata0 {
+		marvell,pins = "mpp15";
+		marvell,function = "sata0";
+	};
+
+	pmx_act_sata1: pmx-act-sata1 {
+		marvell,pins = "mpp16";
+		marvell,function = "sata1";
+	};
+
+	pmx_power_sata0: pmx-power-sata0 {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_sata1: pmx-power-sata1 {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	pmx_button_reset: pmx-button-reset {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_button_power: pmx-button-power {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	adt7476: thermal@2e {
+		compatible = "adi,adt7476";
+		reg = <0x2e>;
+	};
+};
+
+&nand {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		 reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
new file mode 100644
index 0000000000000..f59ff7578dfcd
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Ctera C200 V1 Board Description
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V1";
+	compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-10 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port2>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port1>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth0port {
+	phy-handle = <&ethphy9>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@30 {
+		compatible = "s35390a";
+		reg = <0x30>;
+	};
+
+	lm63@4c {
+		compatible = "national,lm63";
+		reg = <0x4c>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy9: ethernet-phy@9 {
+		reg = <9>;
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <40>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x200000>;
+	};
+
+	partition@200000 {
+		label = "certificate";
+		reg = <0x0200000 0x100000>;
+	};
+
+	partition@300000 {
+		label = "preset_cfg";
+		reg = <0x0300000 0x100000>;
+	};
+
+	partition@400000 {
+		label = "dev_params";
+		reg = <0x0400000 0x100000>;
+	};
+
+	partition@500000 {
+		label = "active_bank";
+		reg = <0x0500000 0x0100000>;
+	};
+
+	partition@600000 {
+		label = "magic";
+		reg = <0x0600000 0x0100000>;
+	};
+
+	partition@700000 {
+		label = "bank1";
+		reg = <0x0700000 0x2800000>;
+	};
+
+	partition@2f00000 {
+		label = "bank2";
+		reg = <0x2f00000 0x2800000>;
+	};
+
+	/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+	partition@5a00000 {
+		label = "reserved";
+		reg = <0x5a00000 0x2000000>;
+	};
+
+	partition@7a00000 {
+		label = "rootfs";
+		reg = <0x7a00000 0x8600000>;
+	};
+};
+
+&pinctrl {
+	/* Buzzer gpios are connected to two pins of buzzer.
+	 * This buzzer require a modulated signal from gpio.
+	 * Leave it as is due lack of proper driver.
+	 */
+	pmx_buzzer: pmx-buzzer {
+		marvell,pins = "mpp12", "mpp13";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38",
+			       "mpp39", "mpp40", "mpp42", "mpp43", "mpp44",
+			       "mpp45", "mpp46", "mpp47";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49";
+		marvell,function = "gpio";
+	};
+
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		#trigger-source-cells = <0>;
+
+		hub_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+
+		hub_port2: port@2 {
+			reg = <2>;
+			#trigger-source-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
new file mode 100644
index 0000000000000..448b0cd23b5f1
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "LaCie CloudBox";
+	compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
+				marvell,pins = "mpp15";
+				marvell,function = "sata0";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			pinctrl-0 = <&pmx_cloudbox_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power {
+			label = "Power push button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "cloudbox:red:fail";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+		blue-sata {
+			label = "cloudbox:blue:sata";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-d2net.dts b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts
new file mode 100644
index 0000000000000..bd3b266dd7660
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for d2 Network v2
+ *
+ * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org>
+ *
+*/
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie d2 Network v2";
+	compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "d2net_v2:blue:sata";
+			slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+			cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "d2net_v2:red:fail";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/marvell/kirkwood-db-88f6281.dts
new file mode 100644
index 0000000000000..a9a8e6b744c76
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-db-88f6281.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell DB-88F6281-BP Development Board";
+	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/marvell/kirkwood-db-88f6282.dts
new file mode 100644
index 0000000000000..6dc6579d45240
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-db-88f6282.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-88F6282-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Marvell DB-88F6282-BP Development Board";
+	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-db.dtsi b/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
new file mode 100644
index 0000000000000..6fe2e31534afd
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pin-controller@10000 {
+			pmx_sdio_gpios: pmx-sdio-gpios {
+				marvell,pins = "mpp37", "mpp38";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio_gpios>;
+			pinctrl-names = "default";
+			wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			status = "okay";
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
new file mode 100644
index 0000000000000..0c0851cd9bece
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "D-Link DIR-665";
+	compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 =< &pmx_led_usb
+				     &pmx_led_internet_blue
+				     &pmx_led_internet_amber
+				     &pmx_led_5g &pmx_led_status_blue
+				     &pmx_led_wps &pmx_led_status_amber
+				     &pmx_led_24g
+				     &pmx_btn_restart &pmx_btn_wps>;
+			pinctrl-names = "default";
+
+			pmx_led_usb: pmx-led-usb {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_led_internet_blue: pmx-led-internet-blue {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_internet_amber: pmx-led-internet-amber {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_5g: pmx-led-5g {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_status_blue: pmx-led-status-blue {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_wps: pmx-led-wps {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_status_amber: pmx-led-status-amber {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_24g: pmx-led-24g {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_btn_restart: pmx-btn-restart {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_btn_wps: pmx-btn-wps {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				reg = <0>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "nvram";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				partition@40000 {
+					label = "kernel";
+					reg = <0x40000 0x180000>;
+				};
+
+				partition@1c0000 {
+					label = "rootfs";
+					reg = <0x1c0000 0xe00000>;
+				};
+
+				cal_data: partition@fc0000 {
+					label = "cal_data";
+					reg = <0xfc0000 0x10000>;
+					read-only;
+				};
+
+				partition@fd0000 {
+					label = "lang_pack";
+					reg = <0xfd0000 0x30000>;
+					read-only;
+				};
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		i2c@11000 {
+			status = "okay";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue-usb {
+			label = "dir665:blue:usb";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		blue-internet {
+			/* Can only be turned on if the Internet
+			 * Ethernet port has Link
+			 */
+			label = "dir665:blue:internet";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+		amber-internet {
+			label = "dir665:amber:internet";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+		blue-wifi5g {
+			label = "dir665:blue:5g";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+		blue-status {
+			label = "dir665:blue:status";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+		blue-wps {
+			label = "dir665:blue:wps";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+		amber-status {
+			label = "dir665:amber:status";
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+		blue-24g {
+			label = "dir665:blue:24g";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan3";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@6 {
+				reg = <6>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
+ * fixed speed and duplex. */
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+		phy-mode = "rgmii";
+	};
+};
+
+/* eth1 is connected to the switch as well. However DSA only supports a
+ * single CPU port. So leave this port disabled to avoid confusion. */
+
+&eth1 {
+	status = "disabled";
+};
+
+/* There is no battery on the boards, so the RTC does not keep time
+ * when there is no power, making it useless. */
+&rtc {
+	status = "disabled";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dns320.dts b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts
new file mode 100644
index 0000000000000..d6b0f418fd018
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-dnskw.dtsi"
+
+/ {
+	model = "D-Link DNS-320 NAS (Rev A1)";
+	compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_320
+			     &pmx_led_red_left_hdd &pmx_led_red_right_hdd
+			     &pmx_led_white_usb>;
+		pinctrl-names = "default";
+
+		blue-power {
+			label = "dns320:blue:power";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		blue-usb {
+			label = "dns320:blue:usb";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+		orange-l_hdd {
+			label = "dns320:orange:l_hdd";
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+		orange-r_hdd {
+			label = "dns320:orange:r_hdd";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+		orange-usb {
+			label = "dns320:orange:usb";
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
+		};
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dns325.dts b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts
new file mode 100644
index 0000000000000..94d9c06cbbf5c
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-dnskw.dtsi"
+
+/ {
+	model = "D-Link DNS-325 NAS (Rev A1)";
+	compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325
+			     &pmx_led_red_left_hdd &pmx_led_red_right_hdd
+			     &pmx_led_white_usb>;
+		pinctrl-names = "default";
+
+		white-power {
+			label = "dns325:white:power";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		white-usb {
+			label = "dns325:white:usb";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
+		};
+		red-l_hdd {
+			label = "dns325:red:l_hdd";
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+		red-r_hdd {
+			label = "dns325:red:r_hdd";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+		red-usb {
+			label = "dns325:red:usb";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+
+			lm75: lm75@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
new file mode 100644
index 0000000000000..eb917462b219b
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "D-Link DNS NASes (kirkwood-based)";
+	compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_power &pmx_button_unmount
+			     &pmx_button_reset>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+		eject {
+			label = "USB unmount button";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
+			 &gpio1 13 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0    0
+				      3000 1
+				      6000 2>;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
+				     &pmx_present_sata1 &pmx_fan_tacho
+				     &pmx_temp_alarm>;
+			pinctrl-names = "default";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_right_hdd: pmx-led-red-right-hdd {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_left_hdd: pmx-led-red-left-hdd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_325: pmx-led-red-usb-325 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_320: pmx-led-red-usb-320 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_power_back_on: pmx-power-back-on {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata0: pmx-power-sata0 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata1: pmx-power-sata1 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata0: pmx-present-sata0 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata1: pmx-present-sata1 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_white_usb: pmx-led-white-usb {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_fan_tacho: pmx-fan-tacho {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high_speed: pmx-fan-high-speed {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low_speed: pmx-fan-low-speed {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_button_unmount: pmx-button-unmount {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_temp_alarm: pmx-temp-alarm {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 7 0>;
+		};
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 8 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x500000>;
+	};
+
+	partition@600000 {
+		label = "ramdisk";
+		reg = <0x0600000 0x500000>;
+	};
+
+	partition@b00000 {
+		label = "image";
+		reg = <0x0b00000 0x6600000>;
+	};
+
+	partition@7100000 {
+		label = "mini firmware";
+		reg = <0x7100000 0xa00000>;
+	};
+
+	partition@7b00000 {
+		label = "config";
+		reg = <0x7b00000 0x500000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
new file mode 100644
index 0000000000000..264938dfa4d94
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Seagate FreeAgent Dockstar";
+	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led-green {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_orange: pmx-led-orange {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
+		pinctrl-names = "default";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x0500000 0xfb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88e1116";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts
new file mode 100644
index 0000000000000..328516351e847
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Globalscale Technologies Dreamplug";
+	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_bluetooth: pmx-led-bluetooth {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi: pmx-led-wifi {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi_ap: pmx-led-wifi-ap {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+
+				partition@100000 {
+					reg = <0x100000 0x10000>;
+					label = "u-boot env";
+				};
+
+				partition@180000 {
+					reg = <0x180000 0x10000>;
+					label = "dtb";
+				};
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
+			     &pmx_led_wifi_ap >;
+		pinctrl-names = "default";
+
+		bluetooth {
+			label = "dreamplug:blue:bluetooth";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		wifi {
+			label = "dreamplug:green:wifi";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+		wifi-ap {
+			label = "dreamplug:green:wifi_ap";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds109.dts b/arch/arm/boot/dts/marvell/kirkwood-ds109.dts
new file mode 100644
index 0000000000000..29982e7acb7fd
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds109.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS109, DS110, DS110jv20";
+	compatible = "synology,ds109", "synology,ds110jv20",
+		     "synology,ds110", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/marvell/kirkwood-ds110jv10.dts
new file mode 100644
index 0000000000000..d68c616e9309d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds110jv10.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS110j v10 and v30";
+	compatible = "synology,ds110jv10", "synology,ds110jv30",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds111.dts b/arch/arm/boot/dts/marvell/kirkwood-ds111.dts
new file mode 100644
index 0000000000000..e1420cbcd7e43
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds111.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS111";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds112.dts b/arch/arm/boot/dts/marvell/kirkwood-ds112.dts
new file mode 100644
index 0000000000000..3912f1b525b66
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds112.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS112";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-30 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds209.dts b/arch/arm/boot/dts/marvell/kirkwood-ds209.dts
new file mode 100644
index 0000000000000..f41fe95e055f0
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds209.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS209";
+	compatible = "synology,ds209", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds210.dts b/arch/arm/boot/dts/marvell/kirkwood-ds210.dts
new file mode 100644
index 0000000000000..729f959a7838f
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds210.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS210 v10, v20, v30, DS211j";
+	compatible = "synology,ds210jv10", "synology,ds210jv20",
+		     "synology,ds210jv30", "synology,ds211j",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds212.dts b/arch/arm/boot/dts/marvell/kirkwood-ds212.dts
new file mode 100644
index 0000000000000..416bab50d1709
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds212.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
+	compatible = "synology,ds212", "synology,ds212pv10",
+		     "synology,ds212pv10", "synology,ds212pv20",
+		     "synology,ds213airv10", "synology,ds213v10",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds212j.dts b/arch/arm/boot/dts/marvell/kirkwood-ds212j.dts
new file mode 100644
index 0000000000000..14cf4d8afaf37
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds212j.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212j v10, v20";
+	compatible = "synology,ds212jv10", "synology,ds212jv20",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds409.dts b/arch/arm/boot/dts/marvell/kirkwood-ds409.dts
new file mode 100644
index 0000000000000..a8650f9e3eb76
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds409.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS409, DS410j";
+	compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds409slim.dts b/arch/arm/boot/dts/marvell/kirkwood-ds409slim.dts
new file mode 100644
index 0000000000000..27a1d840bd15c
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds409slim.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology 409slim";
+	compatible = "synology,ds409slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-20 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds411.dts b/arch/arm/boot/dts/marvell/kirkwood-ds411.dts
new file mode 100644
index 0000000000000..1d4256ef325d8
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds411.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411, DS413jv10";
+	compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	regulators-hdd-34 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds411j.dts b/arch/arm/boot/dts/marvell/kirkwood-ds411j.dts
new file mode 100644
index 0000000000000..bb3200daea1e4
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds411j.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411j";
+	compatible = "synology,ds411j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds411slim.dts b/arch/arm/boot/dts/marvell/kirkwood-ds411slim.dts
new file mode 100644
index 0000000000000..9c5364a4e0a88
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds411slim.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411slim";
+	compatible = "synology,ds411slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
new file mode 100644
index 0000000000000..d4cb3cd3e2a2d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Seagate GoFlex Net";
+	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_0: pmx-led_right_cap_0 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_1: pmx-led_right_cap_1 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_2: pmx-led_right_cap_2 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_3: pmx-led_right_cap_3 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_0: pmx-led_left_cap_0 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_1: pmx-led_left_cap_1 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_2: pmx-led_left_cap_2 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_3: pmx-led_left_cap_3 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led_green {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_orange: pmx-led_orange {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_orange
+			      &pmx_led_left_cap_0 &pmx_led_left_cap_1
+			      &pmx_led_left_cap_2 &pmx_led_left_cap_3
+			      &pmx_led_right_cap_0 &pmx_led_right_cap_1
+			      &pmx_led_right_cap_2 &pmx_led_right_cap_3
+			    >;
+		pinctrl-names = "default";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		left0 {
+			label = "status:white:left0";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		left1 {
+			label = "status:white:left1";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+		left2 {
+			label = "status:white:left2";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+		left3 {
+			label = "status:white:left3";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+		right0 {
+			label = "status:white:right0";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+		right1 {
+			label = "status:white:right1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		right2 {
+			label = "status:white:right2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+		right3 {
+			label = "status:white:right3";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "pogoplug";
+		reg = <0x0500000 0x2000000>;
+	};
+
+	partition@2500000 {
+		label = "root";
+		reg = <0x02500000 0xd800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
new file mode 100644
index 0000000000000..dfb41393941db
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Globalscale Technologies Guruplug Server Plus";
+	compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_health_r: pmx-led-health-r {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_g: pmx-led-health-g {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wmode_r: pmx-led-wmode-r {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wmode_g: pmx-led-wmode-g {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		/* AzureWave AW-GH381 WiFi/BT */
+		mvsdio@90000 {
+			status = "okay";
+			non-removable;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
+			      &pmx_led_wmode_r &pmx_led_wmode_g >;
+		pinctrl-names = "default";
+
+		health-r {
+			label = "guruplug:red:health";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+		health-g {
+			label = "guruplug:green:health";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		wmode-r {
+			label = "guruplug:red:wmode";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+		wmode-g {
+			label = "guruplug:green:wmode";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x00100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		/* Marvell 88E1121R */
+		compatible = "ethernet-phy-id0141.0cb0",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		/* Marvell 88E1121R */
+		compatible = "ethernet-phy-id0141.0cb0",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+		phy-connection-type = "rgmii-id";
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
new file mode 100644
index 0000000000000..962a910a6f5ca
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
+	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_os_red: pmx-led-os-red {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+			pmx_led_os_green: pmx-led-os-green {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb_transfer: pmx-led-usb-transfer {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_button_usb_copy: pmx-button-usb-copy {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
+		pinctrl-names = "default";
+
+		copy {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
+			     &pmx_led_usb_transfer>;
+		pinctrl-names = "default";
+
+		green-os {
+			label = "ib62x0:green:os";
+			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		red-os {
+			label = "ib62x0:red:os";
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+		usb-copy {
+			label = "ib62x0:red:usb_copy";
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0xe0000>;
+	};
+
+	partition@e0000 {
+		label = "u-boot environment";
+		reg = <0xe0000 0x20000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x600000>;
+	};
+
+	partition@700000 {
+		label = "root";
+		reg = <0x0700000 0xf900000>;
+	};
+
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
new file mode 100644
index 0000000000000..aed20185fd7ab
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Iomega Iconnect";
+	compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+		linux,initrd-start = <0x4500040>;
+		linux,initrd-end   = <0x4800000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_button_otb: pmx-button-otb {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_level: pmx-led-level {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_blue: pmx-led-power-blue {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_red: pmx-power-red {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb1: pmx-led-usb1 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb2: pmx-led-usb2 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb3: pmx-led-usb3 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb4: pmx-led-usb4 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_otb: pmx-led-otb {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
+			      &pmx_led_power_red &pmx_led_usb1
+			      &pmx_led_usb2 &pmx_led_usb3
+			      &pmx_led_usb4 &pmx_led_otb >;
+		pinctrl-names = "default";
+
+		led-level {
+			label = "led_level";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		power-blue {
+			label = "power:blue";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		power-red {
+			label = "power:red";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+		usb1 {
+			label = "usb1:blue";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+		usb2 {
+			label = "usb2:blue";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+		usb3 {
+			label = "usb3:blue";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+		usb4 {
+			label = "usb4:blue";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+		otb {
+			label = "otb:blue";
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
+		pinctrl-names = "default";
+
+		otb {
+			label = "OTB Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0xc0000>;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+	};
+
+	partition@100000 {
+		label = "zImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@540000 {
+		label = "initrd";
+		reg = <0x540000 0x300000>;
+	};
+
+	partition@980000 {
+		label = "boot";
+		reg = <0x980000 0x1f400000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@11 {
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
new file mode 100644
index 0000000000000..2338f495d5172
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Iomega StorCenter ix2-200";
+	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
+				      &pmx_led_sata_brt_ctrl_2
+				      &pmx_led_backup_brt_ctrl_1
+				      &pmx_led_backup_brt_ctrl_2
+				      &pmx_led_power_brt_ctrl_1
+				      &pmx_led_power_brt_ctrl_2
+				      &pmx_led_health_brt_ctrl_1
+				      &pmx_led_health_brt_ctrl_2
+				      &pmx_led_rebuild_brt_ctrl_1
+				      &pmx_led_rebuild_brt_ctrl_2 >;
+			pinctrl-names = "default";
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup: pmx-led-backup {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_button_otb: pmx-button-otb {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild: pmx-led-rebuild {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_health: pmx-led_health {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+		};
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_backup &pmx_led_power
+			      &pmx_led_rebuild &pmx_led_health >;
+		pinctrl-names = "default";
+
+		power_led {
+			label = "status:white:power_led";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		rebuild_led {
+			label = "status:white:rebuild_led";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+		health_led {
+			label = "status:red:health_led";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_reset &pmx_button_power
+			     &pmx_button_otb>;
+		pinctrl-names = "default";
+
+
+		Power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+		Reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+		OTB {
+			label = "OTB Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@400000 {
+		label = "rootfs";
+		reg = <0x400000 0x1C00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@11 {
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-is2.dts b/arch/arm/boot/dts/marvell/kirkwood-is2.dts
new file mode 100644
index 0000000000000..1bc16a5cdbaab
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-is2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Internet Space v2";
+	compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi
new file mode 100644
index 0000000000000..52baffe45f126
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
+			pinctrl-names = "default";
+
+			pmx_i2c_gpio_sda: pmx-gpio-sda {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_i2c_gpio_scl: pmx-gpio-scl {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
+			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <25>;
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-km_fixedeth.dts b/arch/arm/boot/dts/marvell/kirkwood-km_fixedeth.dts
new file mode 100644
index 0000000000000..515be7bccc0a9
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-km_fixedeth.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
+#include "kirkwood-km_common.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Fixed Eth";
+	compatible = "keymile,km_fixedeth", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;  /* <SPEED_1000> */
+		duplex = <1>; /* <DUPLEX_FULL> */
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/marvell/kirkwood-km_kirkwood.dts
new file mode 100644
index 0000000000000..f035eff1c111b
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-km_kirkwood.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
+#include "kirkwood-km_common.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Reference Design";
+	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
new file mode 100644
index 0000000000000..9fd3581bb24b4
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Check Point L-50 Board Description
+ * Copyright 2020 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Check Point L-50";
+	compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
+			pinctrl-names = "default";
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_button29: pmx_button29 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led38: pmx_led38 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			status = "okay";
+			cd-gpios = <&gpio1 14 9>;
+		};
+
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			gpio2: gpio-expander@20{
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1505q";
+				reg = <0x20>;
+
+				gpio-controller;
+			};
+
+			/* Three GPIOs from 0x21 exp. are undescribed in dts:
+			 * 1: DSL module reset (active low)
+			 * 5: mPCIE reset (active low)
+			 * 6: Express card reset (active low)
+			 */
+			gpio3: gpio-expander@21{
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1505q";
+				reg = <0x21>;
+
+				gpio-controller;
+			};
+
+			rtc@30 {
+				compatible = "s35390a";
+				reg = <0x30>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_green {
+			label = "l-50:green:status";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		status_red {
+			label = "l-50:red:status";
+			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi {
+			label = "l-50:green:wifi";
+			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		internet_green {
+			label = "l-50:green:internet";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+
+		internet_red {
+			label = "l-50:red:internet";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1_green {
+			label = "l-50:green:usb1";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port3>;
+		};
+
+		usb1_red {
+			label = "l-50:red:usb1";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2_green {
+			label = "l-50:green:usb2";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port1>;
+		};
+
+		usb2_red {
+			label = "l-50:red:usb2";
+			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	usb2_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_pwr";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	usb1_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_pwr";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	mpcie_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie_pwr";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	express_card_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "express_card_pwr";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		factory_defaults {
+			label = "factory_defaults";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy8: ethernet-phy@8 {
+		reg = <0x08>;
+	};
+
+	switch0: switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan6";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan7";
+			};
+
+			switch0port5: port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-txid";
+				link = <&switch1port5>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth1port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	switch@11 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x11>;
+		dsa,member = <0 1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan3";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan8";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan4";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "dmz";
+			};
+
+			switch1port5: port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-txid";
+				link = <&switch0port5>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "dsl";
+				fixed-link {
+					speed = <100>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy8>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+		phy-mode = "rgmii";
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x000c0000>;
+	};
+
+	partition@a0000 {
+		label = "bootldr-env";
+		reg = <0x000c0000 0x00040000>;
+	};
+
+	partition@100000 {
+		label = "kernel-1";
+		reg = <0x00100000 0x00800000>;
+	};
+
+	partition@900000 {
+		label = "rootfs-1";
+		reg = <0x00900000 0x07100000>;
+	};
+
+	partition@7a00000 {
+		label = "kernel-2";
+		reg = <0x07a00000 0x00800000>;
+	};
+
+	partition@8200000 {
+		label = "rootfs-2";
+		reg = <0x08200000 0x07100000>;
+	};
+
+	partition@f300000 {
+		label = "default_sw";
+		reg = <0x0f300000 0x07900000>;
+	};
+
+	partition@16c00000 {
+		label = "logs";
+		reg = <0x16c00000 0x01800000>;
+	};
+
+	partition@18400000 {
+		label = "preset_cfg";
+		reg = <0x18400000 0x00100000>;
+	};
+
+	partition@18500000 {
+		label = "adsl";
+		reg = <0x18500000 0x00100000>;
+	};
+
+	partition@18600000 {
+		label = "storage";
+		reg = <0x18600000 0x07a00000>;
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		#trigger-source-cells = <0>;
+
+		hub_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+
+		hub_port3: port@3 {
+			reg = <3>;
+			#trigger-source-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-laplug.dts b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
new file mode 100644
index 0000000000000..8c2b540eaf4ff
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "LaCie LaPlug";
+	compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c04";
+				pagesize = <16>;
+				reg = <0x50>;
+			};
+		};
+
+		pinctrl: pin-controller@10000 {
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power push button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "laplug_v2:red:power";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		blue-power {
+			label = "laplug_v2:blue:power";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power_back1: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power Back 1";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb_power_back2: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "USB Power Back 2";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb_power_front: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "USB Power Front";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	/* Total size : 512MB */
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x100000>; /* 1MB */
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x1000000>; /* 16MB */
+	};
+
+	partition@1100000 {
+		label = "rootfs";
+		reg = <0x1100000 0x1EF00000>; /* 495MB */
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
new file mode 100644
index 0000000000000..377b6e970259f
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree common file for kirkwood-6282 based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-linkstation.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		function-button {
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-function-led {
+			label = "linkstation:red:function";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue-function-led {
+			label = "linkstation:blue:function";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
+			 &gpio0 16 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map = <0 3
+				1500 2
+				3250 1
+				5000 0>;
+
+		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators {
+		usb_power: regulator@1 {
+			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power0: regulator@2 {
+			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation-duo-6281.dtsi
new file mode 100644
index 0000000000000..ba629e02ba31a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-duo-6281.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-linkstation.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_keys {
+		function-button {
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+
+		red-function-led {
+			label = "linkstation:red:function";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		blue-function-led {
+			label = "linkstation:blue:function";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		usb_power: regulator@1 {
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power0: regulator@2 {
+			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsqvl.dts
new file mode 100644
index 0000000000000..8bb3810889106
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsqvl.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-QVL
+ *
+ * Copyright (C) 2016, Mario Lange <mario_lange@gmx.net>
+ *
+ * Based on kirkwood-linkstation-lswvl.dts,
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-QVL";
+	compatible = "buffalo,lsqvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr2: pmx-led-hdderr2 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr3: pmx-led-hdderr3 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1
+			     &pmx_led_hdderr2
+			     &pmx_led_hdderr3>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr2-led {
+			label = "linkstation:red:hdderr2";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr3-led {
+			label = "linkstation:red:hdderr3";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsvl.dts
new file mode 100644
index 0000000000000..3f2a0bfe03edd
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsvl.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-VL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-VL";
+	compatible = "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswsxl.dts
new file mode 100644
index 0000000000000..c42d0da38fe7d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswsxl.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-WSXL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-duo-6281.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WSXL";
+	compatible = "buffalo,lswsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswvl.dts
new file mode 100644
index 0000000000000..e0f62adc0d5da
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswvl.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-WVL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WVL";
+	compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
new file mode 100644
index 0000000000000..c6024b569423a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-WXL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-duo-6281.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WXL";
+	compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
+			 &gpio1 15 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map = <0 3
+				1500 2
+				3250 1
+				5000 0>;
+
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi
new file mode 100644
index 0000000000000..b54c9980f636b
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree common file for kirkwood based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p40", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x60000>;
+					label = "uboot";
+					read-only;
+				};
+
+				partition@60000 {
+					reg = <0x60000 0x10000>;
+					label = "dtb";
+					read-only;
+				};
+
+				partition@70000 {
+					reg = <0x70000 0x10000>;
+					label = "uboot_env";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_function &pmx_power_switch
+			     &pmx_power_auto_switch>;
+		pinctrl-names = "default";
+
+		function-button {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+		};
+
+		power-on-switch {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+		};
+
+		power-auto-switch {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue>;
+		pinctrl-names = "default";
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_usb_vbus>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		hdd_power0: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
new file mode 100644
index 0000000000000..27fd6e2337d55
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-viper.dts - Device Tree file for Linksys viper (E4200v2 / EA4500)
+ *
+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
+ * (c) 2013 Deutsche Telekom Innovation Laboratories
+ * (c) 2014 Luka Perkov <luka@openwrt.org>
+ * (c) 2014 Randy C. Will <randall.will@gmail.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Linksys Viper (E4200v2 / EA4500)";
+	compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
+		pinctrl-names = "default";
+
+		wps {
+			label = "WPS Button";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
+		pinctrl-names = "default";
+
+		white-health {
+			label = "viper:white:health";
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		white-pulse {
+			label = "viper:white:pulse";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	pmx_led_white_health: pmx-led-white-health {
+		marvell,pins = "mpp7";
+		marvell,function = "gpo";
+	};
+	pmx_led_white_pulse: pmx-led-white-pulse {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+	pmx_btn_wps: pmx-btn-wps {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+	pmx_btn_reset: pmx-btn-reset {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "u_env";
+			reg = <0x80000 0x20000>;
+		};
+
+		partition@a0000 {
+			label = "s_env";
+			reg = <0xA0000 0x20000>;
+		};
+
+		partition@200000 {
+			label = "kernel";
+			reg = <0x200000 0x2A0000>;
+		};
+
+		partition@4a0000 {
+			label = "rootfs";
+			reg = <0x4A0000 0x1760000>;
+		};
+
+		partition@1c00000 {
+			label = "alt_kernel";
+			reg = <0x1C00000 0x2A0000>;
+		};
+
+		partition@1ea0000 {
+			label = "alt_rootfs";
+			reg = <0x1EA0000 0x1760000>;
+		};
+
+		partition@3600000 {
+			label = "syscfg";
+			reg = <0x3600000 0x4A00000>;
+		};
+
+		partition@c0000 {
+			label = "unused";
+			reg = <0xC0000 0x140000>;
+		};
+
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <16>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "ethernet1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "ethernet2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "ethernet3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "ethernet4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "internet";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
+ * fixed speed and duplex.
+ */
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+		phy-mode = "rgmii";
+	};
+};
+
+/* eth1 is connected to the switch at port 6. However DSA only supports a
+ * single CPU port. So leave this port disabled to avoid confusion.
+ */
+&eth1 {
+	status = "disabled";
+};
+
+/* There is no battery on the board, so the RTC does not keep
+ * time when there is no power, making it useless.
+ */
+&rtc {
+	status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/marvell/kirkwood-lschlv2.dts b/arch/arm/boot/dts/marvell/kirkwood-lschlv2.dts
new file mode 100644
index 0000000000000..1d737d903f5f7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-lschlv2.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-lsxl.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-CHLv2";
+	compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxhl.dts b/arch/arm/boot/dts/marvell/kirkwood-lsxhl.dts
new file mode 100644
index 0000000000000..a56e0d797778c
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxhl.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-lsxl.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-XHL";
+	compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
new file mode 100644
index 0000000000000..88b70ba1c8fee
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			/* Non-default UART pins */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp4", "mpp5";
+			};
+
+			pmx_power_hdd: pmx-power-hdd {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp11";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp19";
+				marvell,function = "gpo";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function_red {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "m25p40", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x60000>;
+					label = "uboot";
+					read-only;
+				};
+
+				partition@60000 {
+					reg = <0x60000 0x10000>;
+					label = "dtb";
+					read-only;
+				};
+
+				partition@70000 {
+					reg = <0x70000 0x10000>;
+					label = "uboot_env";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_function &pmx_power_switch
+			     &pmx_power_auto_switch>;
+		pinctrl-names = "default";
+
+		option {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+		reserved {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+		power {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue>;
+		pinctrl-names = "default";
+
+		func_blue {
+			label = "lsxl:blue:func";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		alarm {
+			label = "lsxl:red:alarm";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		info {
+			label = "lsxl:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "lsxl:blue:power";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		func_red {
+			label = "lsxl:red:func";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
+		         &gpio0 18 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map = <0    3
+		                      1500 2
+		                      3250 1
+		                      5000 0>;
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 11 0>;
+		};
+		hdd_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 10 0>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts
new file mode 100644
index 0000000000000..e87ea71465462
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "MPL CEC4";
+	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_health: pmx-led-health {
+				marvell,pins = "mpp7";
+				marvell,function = "gpo";
+			};
+
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp34";
+				marvell,function = "sata1";
+			};
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp35";
+				marvell,function = "sata0";
+			};
+
+			pmx_led_user1o: pmx-led-user1o {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user1g: pmx-led-user1g {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user0o: pmx-led-user0o {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user0g: pmx-led-user0g {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_misc: pmx-led-misc {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+			};
+
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			/* No WP GPIO */
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_health
+			      &pmx_led_user1o
+			      &pmx_led_user1g &pmx_led_user0o
+			      &pmx_led_user0g &pmx_led_misc
+			    >;
+		pinctrl-names = "default";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		user1o {
+			label = "user1:orange";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user1g {
+			label = "user1:green";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user0o {
+			label = "user0:orange";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user0g {
+			label = "user0:green";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		misc {
+			label = "status:orange:misc";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "env";
+		reg = <0x100000 0x80000>;
+	};
+
+	partition@180000 {
+		label = "fdt";
+		reg = <0x180000 0x80000>;
+	};
+
+	partition@200000 {
+		label = "kernel";
+		reg = <0x200000 0x400000>;
+	};
+
+	partition@600000 {
+		label = "rootfs";
+		reg = <0x600000 0x1fa00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	ethphy1: ethernet-phy@2 {
+		reg = <2>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
new file mode 100644
index 0000000000000..5a77286136c72
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell 88F6281 GTW GE Board
+ *
+ * Lennert Buytenhek <buytenh@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell 88F6281 GTW GE Board";
+	compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pin-controller@10000 {
+			pmx_usb_led: pmx-usb-led {
+				marvell,pins = "mpp12";
+				marvell,function = "gpo";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp20", "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_keys: pmx-keys {
+				marvell,pins = "mpp46", "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
+		pinctrl-names = "default";
+
+		green-status {
+			label = "gtw:green:Status";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-status {
+			label = "gtw:red:Status";
+			gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		green-usb {
+			label = "gtw:green:USB";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_keys>;
+		pinctrl-names = "default";
+
+		restart {
+			label = "SWR Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "WPS Button";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+		phy-mode = "rgmii";
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nas2big.dts b/arch/arm/boot/dts/marvell/kirkwood-nas2big.dts
new file mode 100644
index 0000000000000..0b0a15093146b
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-nas2big.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for LaCie 2Big NAS
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+*/
+
+/dts-v1/;
+
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie 2Big NAS";
+	compatible = "lacie,nas2big", "lacie,netxbig", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		rtc@10300 {
+			/* The on-chip RTC is not powered (no supercap). */
+			status = "disabled";
+		};
+		spi@10600 {
+			/*
+			 * A NAND flash is used instead of an SPI flash for
+			 * the other netxbig-compatible boards.
+			 */
+			status = "disabled";
+		};
+	};
+
+	fan {
+		/*
+		 * An I2C fan controller (GMT G762) is used but alarm is
+		 * wired to a separate GPIO.
+		 */
+		compatible = "gpio-fan";
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+
+	regulators: regulators {
+		status = "okay";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+		clocks {
+			g762_clk: g762-oscillator {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	/*
+	 * An external I2C RTC (Dallas DS1337S+) is used. This allows
+	 * to power-up the board on an RTC alarm. The external RTC can
+	 * be kept powered, even when the SoC is off.
+	 */
+	rtc@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+		interrupts = <43>;
+	};
+	g762@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+		clocks = <&g762_clk>;
+	};
+};
+
+&nand {
+	chip-delay = <50>;
+	status = "okay";
+
+	partition@0 {
+		label = "U-Boot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x1000000>;
+	};
+
+	partition@1100000 {
+		label = "root";
+		reg = <0x1100000 0x8000000>;
+	};
+
+	partition@9100000 {
+		label = "unused";
+		reg = <0x9100000 0x6f00000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-net2big.dts b/arch/arm/boot/dts/marvell/kirkwood-net2big.dts
new file mode 100644
index 0000000000000..d5f6bb50ba114
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-net2big.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for LaCie 2Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie 2Big Network v2";
+	compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	fan {
+		compatible = "gpio-fan";
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&regulators {
+	regulator@2 {
+		compatible = "regulator-fixed";
+		reg = <2>;
+		regulator-name = "hdd1power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&i2c0 {
+	g762@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+		clocks = <&g762_clk>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-net5big.dts b/arch/arm/boot/dts/marvell/kirkwood-net5big.dts
new file mode 100644
index 0000000000000..2497ad26b5b63
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-net5big.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for LaCie 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie 5Big Network v2";
+	compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+};
+
+&regulators {
+	regulator@2 {
+		compatible = "regulator-fixed";
+		reg = <2>;
+		regulator-name = "hdd1power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@3 {
+		compatible = "regulator-fixed";
+		reg = <3>;
+		regulator-name = "hdd2power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@4 {
+		compatible = "regulator-fixed";
+		reg = <4>;
+		regulator-name = "hdd3power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@5 {
+		compatible = "regulator-fixed";
+		reg = <5>;
+		regulator-name = "hdd4power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	netxbig-leds {
+		blue-sata2 {
+			label = "netxbig:blue:sata2";
+			mode-addr = <5>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata2 {
+			label = "netxbig:red:sata2";
+			mode-addr = <5>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		blue-sata3 {
+			label = "netxbig:blue:sata3";
+			mode-addr = <6>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata3 {
+			label = "netxbig:red:sata3";
+			mode-addr = <6>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		blue-sata4 {
+			label = "netxbig:blue:sata4";
+			mode-addr = <7>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata4 {
+			label = "netxbig:red:sata4";
+			mode-addr = <7>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+	};
+};
+
+&mdio {
+	ethphy1: ethernet-phy@1 {
+		reg = <0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
+
+&i2c0 {
+	g762@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+		clocks = <&g762_clk>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
new file mode 100644
index 0000000000000..cb564c3bcdc43
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for NETGEAR ReadyNAS Duo v2
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS Duo v2";
+	compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_backup: pmx-button-backup {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_power: pmx-led-blue-power {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_activity: pmx-led-blue-activity {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk1: pmx-led-blue-disk1 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk2: pmx-led-blue-disk2 {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_backup: pmx-led-blue-backup {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_poweroff: pmx-poweroff {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+		};
+
+		clocks {
+		       g762_clk: g762-oscillator {
+				 compatible = "fixed-clock";
+				 #clock-cells = <0>;
+				 clock-frequency = <8192>;
+		       };
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			rs5c372a: rs5c372a@32 {
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+
+			g762: g762@3e {
+				compatible = "gmt,g762";
+				reg = <0x3e>;
+				clocks = <&g762_clk>; /* input clock */
+				fan_gear_mode = <0>;
+				fan_startv = <1>;
+				pwm_polarity = <0>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_activity
+			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
+			      &pmx_led_blue_backup >;
+		pinctrl-names = "default";
+
+		power_led {
+			label = "status:blue:power_led";
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		activity_led {
+			label = "status:blue:activity_led";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		disk1_led {
+			label = "status:blue:disk1_led";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		disk2_led {
+			label = "status:blue:disk2_led";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_power &pmx_button_backup
+			     &pmx_button_reset>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb3_regulator: usb3-regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB 3.0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+		read-only;
+	};
+
+	partition@180000 {
+		label = "u-boot-env";
+		reg = <0x180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "minirootfs";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "jffs2";
+		reg = <0x1800000 0x6800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_nv+_v2.dts
new file mode 100644
index 0000000000000..6cf76430cfabd
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_nv+_v2.dts
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for NETGEAR ReadyNAS NV+ v2
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS NV+ v2";
+	compatible = "netgear,readynas-nv+-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_backup: pmx-button-backup {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_power: pmx-led-blue-power {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_backup: pmx-led-blue-backup {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk1: pmx-led-blue-disk1 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk2: pmx-led-blue-disk2 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk3: pmx-led-blue-disk3 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk4: pmx-led-blue-disk4 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_poweroff: pmx-poweroff {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+		};
+
+		clocks {
+			g762_clk: g762-oscillator {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <8192>;
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			rs5c372a: rs5c372a@32 {
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+
+			g762: g762@3e {
+				compatible = "gmt,g762";
+				reg = <0x3e>;
+				clocks = <&g762_clk>; /* input clock */
+				fan_gear_mode = <0>;
+				fan_startv = <1>;
+				pwm_polarity = <0>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 { /* Connected to Marvell 88SM4140 SATA port multiplier */
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	auxdisplay {
+		compatible = "hit,hd44780";
+		data-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>,
+				<&gpio1 1 GPIO_ACTIVE_HIGH>,
+				<&gpio1 3 GPIO_ACTIVE_HIGH>,
+				<&gpio1 17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		backlight-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		display-height-chars = <2>;
+		display-width-chars = <16>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup
+			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
+			      &pmx_led_blue_disk3 &pmx_led_blue_disk3 >;
+		pinctrl-names = "default";
+
+		power_led {
+			label = "status:blue:power_led";
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		disk1_led {
+			label = "status:blue:disk1_led";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		disk2_led {
+			label = "status:blue:disk2_led";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		disk3_led {
+			label = "status:blue:disk3_led";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		disk4_led {
+			label = "status:blue:disk4_led";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_power &pmx_button_backup
+			     &pmx_button_reset>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb3_regulator: usb3-regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB 3.0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+		read-only;
+	};
+
+	partition@180000 {
+		label = "u-boot-env";
+		reg = <0x180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "minirootfs";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "jffs2";
+		reg = <0x1800000 0x6800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+/* Connected to NEC uPD720200 USB 3.0 controller */
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
new file mode 100644
index 0000000000000..b5737026e244d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree common file for LaCie 2Big and 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+*/
+
+#include <dt-bindings/leds/leds-netxbig.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * esc and power represent a three position rocker
+		 * switch. Thus the conventional KEY_POWER does not fit
+		 */
+		exc {
+			label = "Back power switch (on|auto)";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+		power {
+			label = "Back power switch (auto|off)";
+			linux,code = <KEY_1>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+		option {
+			label = "Function button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators: regulators {
+		status = "okay";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd0power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	netxbig_gpio_ext: netxbig-gpio-ext {
+		compatible = "lacie,netxbig-gpio-ext";
+
+		addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+			      &gpio1 16 GPIO_ACTIVE_HIGH
+			      &gpio1 17 GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+			      &gpio1 13 GPIO_ACTIVE_HIGH
+			      &gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+	};
+
+	netxbig-leds {
+		compatible = "lacie,netxbig-leds";
+
+		gpio-ext = <&netxbig_gpio_ext>;
+
+		timers = <NETXBIG_LED_TIMER1 500 500
+			  NETXBIG_LED_TIMER2 500 1000>;
+
+		blue-power {
+			label = "netxbig:blue:power";
+			mode-addr = <0>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 1
+				    NETXBIG_LED_TIMER1 3
+				    NETXBIG_LED_TIMER2 7>;
+			bright-addr = <1>;
+			max-brightness = <7>;
+		};
+		red-power {
+			label = "netxbig:red:power";
+			mode-addr = <0>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <1>;
+			max-brightness = <7>;
+		};
+		blue-sata0 {
+			label = "netxbig:blue:sata0";
+			mode-addr = <3>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata0 {
+			label = "netxbig:red:sata0";
+			mode-addr = <3>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		blue-sata1 {
+			label = "netxbig:blue:sata1";
+			mode-addr = <4>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata1 {
+			label = "netxbig:red:sata1";
+			mode-addr = <4>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_button_function: pmx-button-function {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+	pmx_button_power_off: pmx-button-power-off {
+		marvell,pins = "mpp15";
+		marvell,function = "gpio";
+	};
+	pmx_button_power_on: pmx-button-power-on {
+		marvell,pins = "mpp13";
+		marvell,function = "gpio";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
new file mode 100644
index 0000000000000..51530ea86622a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_ns2_sata0: pmx-ns2-sata0 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_ns2_sata1: pmx-ns2-sata1 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c04";
+				pagesize = <16>;
+				reg = <0x50>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power {
+			label = "Power push button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "ns2:red:fail";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+	};
+
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@X {
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2.dts
new file mode 100644
index 0000000000000..7b67083e1ec01
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space v2";
+	compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts
new file mode 100644
index 0000000000000..b0cb5907ed63f
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space Lite v2";
+	compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
new file mode 100644
index 0000000000000..c0a087e774084
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space Max v2";
+	compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0 &pmx_ns2_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
+			 &gpio0  7 GPIO_ACTIVE_LOW
+			 &gpio1  1 GPIO_ACTIVE_LOW
+			 &gpio0 23 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map =
+			<   0  0
+			 1500 15
+			 1700 14
+			 1800 13
+			 2100 12
+			 3100 11
+			 3300 10
+			 4300  9
+			 5500  8>;
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
new file mode 100644
index 0000000000000..5b9fa14b64286
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	/* This machine is embedded in the first LaCie CloudBox product. */
+	model = "LaCie Network Space Mini v2";
+	compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
+			 &gpio0  7 GPIO_ACTIVE_LOW
+			 &gpio1  1 GPIO_ACTIVE_LOW
+			 &gpio0 23 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map =
+			<   0  0
+			 3000 15
+			 3180 14
+			 4140 13
+			 4570 12
+			 6760 11
+			 7140 10
+			 7980  9
+			 9200  8>;
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts
new file mode 100644
index 0000000000000..c1799a07816ef
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+	compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_unknown>;
+			pinctrl-names = "default";
+
+			pmx_led_esata_green: pmx-led-esata-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_esata_red: pmx-led-esata-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_red: pmx-led-usb-red {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_green: pmx-led-hdd-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_red: pmx-led-hdd-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_unknown: pmx-unknown {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			adt7476: adt7476a@2e {
+				compatible = "adi,adt7476";
+				reg = <0x2e>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red
+			     &pmx_led_usb_green &pmx_led_usb_red
+			     &pmx_led_sys_green &pmx_led_sys_red
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd_green &pmx_led_hdd_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa310:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		red-sys {
+			label = "nsa310:red:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd {
+			label = "nsa310:green:hdd";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd {
+			label = "nsa310:red:hdd";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-esata {
+			label = "nsa310:green:esata";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-esata {
+			label = "nsa310:red:esata";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa310:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		red-usb {
+			label = "nsa310:red:usb";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa310:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa310:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts
new file mode 100644
index 0000000000000..b85e314f045a7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/*
+ * There are at least two different NSA310 designs. This variant does
+ * not have the red USB Led.
+ */
+
+/ {
+	compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_led_esata_green: pmx-led-esata-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_esata_red: pmx-led-esata-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_green: pmx-led-hdd-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_red: pmx-led-hdd-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			lm85: lm85@2e {
+				compatible = "national,lm85";
+				reg = <0x2e>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green-sys {
+			label = "nsa310:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		red-sys {
+			label = "nsa310:red:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd {
+			label = "nsa310:green:hdd";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd {
+			label = "nsa310:red:hdd";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-esata {
+			label = "nsa310:green:esata";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-esata {
+			label = "nsa310:red:esata";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa310:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa310:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa310:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
new file mode 100644
index 0000000000000..49da633a1bc02
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * ZyXEL NSA310S Board Description
+ * Copyright 2020-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ * Based upon the board setup file created by Peter Schildmann
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "ZyXEL NSA310S";
+	compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		copy {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usb-host";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_DISK;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ata1";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb0_power: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	sata1_power: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	thermal-zones {
+		disk-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&hdd_temp>;
+
+			trips {
+				disk_alert: disk-alert {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				disk_crit: disk-crit {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "htk,ht1382";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		phy-mode = "rgmii-id";
+		marvell,reg-init = <0x1 0x16 0x0 0x3>,
+				   <0x1 0x10 0x0 0x1017>,
+				   <0x1 0x11 0x0 0x4408>,
+				   <0x1 0x16 0x0 0x0>;
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x00c0000>;
+		read-only;
+	};
+	partition@c0000 {
+		label = "uboot_env";
+		reg = <0x00c0000 0x0080000>;
+	};
+	partition@140000 {
+		label = "ubi";
+		reg = <0x0140000 0x7ec0000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp24", "mpp25", "mpp26";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23",
+						"mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_power: pmx-power {
+		marvell,pins = "mpp21", "mpp33";
+		marvell,function = "gpio";
+	};
+
+	pmx_pwr_off: pmx-pwr-off {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
new file mode 100644
index 0000000000000..652405e65006f
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Device tree file for the Zyxel NSA 320 NAS box.
+ *
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ *
+ *
+ * Based upon the board setup file created by Peter Schildmann */
+
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+	model = "Zyxel NSA320";
+	compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			/* SATA Activity and Present pins are not connected */
+			pmx_sata0: pmx-sata0 {
+				marvell,pins ;
+				marvell,function = "sata0";
+			};
+
+			pmx_sata1: pmx-sata1 {
+				marvell,pins ;
+				marvell,function = "sata1";
+			};
+
+			pmx_led_hdd2_green: pmx-led-hdd2-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd2_red: pmx-led-hdd2-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_data: pmx-mcu-data {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_clk: pmx-mcu-clk {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_act: pmx-mcu-act {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_orange: pmx-led-sys-orange {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_green: pmx-led-hdd1-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_red: pmx-led-hdd1-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_htp: pmx-htp {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			/* Buzzer needs to be switched at around 1kHz so is
+			   not compatible with the gpio-beeper driver. */
+			pmx_buzzer: pmx-buzzer {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_vid_b1: pmx-vid-b1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_data: pmx-power-resume-data {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_clk: pmx-power-resume-clk {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			pcf8563: pcf8563@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	regulators {
+		usb0_power: regulator@1 {
+			enable-active-high;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+			     &pmx_led_usb_green
+			     &pmx_led_sys_green &pmx_led_sys_orange
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa320:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		orange-sys {
+			label = "nsa320:orange:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd1 {
+			label = "nsa320:green:hdd1";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd1 {
+			label = "nsa320:red:hdd1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd2 {
+			label = "nsa320:green:hdd2";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd2 {
+			label = "nsa320:red:hdd2";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa320:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa320:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa320:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	hwmon {
+		compatible = "zyxel,nsa320-mcu";
+		pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>;
+		pinctrl-names = "default";
+
+		data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+	};
+
+	/* The following pins are currently not assigned to a driver,
+	   some of them should be configured as inputs.
+	pinctrl-0 = <&pmx_htp &pmx_vid_b1
+		     &pmx_power_resume_data &pmx_power_resume_clk>; */
+};
+
+&mdio {
+	status = "okay";
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
new file mode 100644
index 0000000000000..371456de34b27
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Device tree file for the Zyxel NSA 325 NAS box.
+ *
+ * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
+ *
+ *
+ * Based upon the board setup file created by Peter Schildmann
+ */
+
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+	model = "ZyXEL NSA325";
+	compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_led_hdd2_green: pmx-led-hdd2-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd2_red: pmx-led-hdd2-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_data: pmx-mcu-data {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_clk: pmx-mcu-clk {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_act: pmx-mcu-act {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_orange: pmx-led-sys-orange {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_green: pmx-led-hdd1-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_red: pmx-led-hdd1-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_htp: pmx-htp {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			/*
+			 * Buzzer needs to be switched at around 1kHz so is
+			 * not compatible with the gpio-beeper driver.
+			 */
+			pmx_buzzer: pmx-buzzer {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_vid_b1: pmx-vid-b1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_data: pmx-power-resume-data {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_clk: pmx-power-resume-clk {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+
+			pmx_pwr_sata1: pmx-pwr-sata1 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		/* This board uses the pcf8563 RTC instead of the SoC RTC */
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			pcf8563: pcf8563@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_pwr_sata1>;
+		pinctrl-names = "default";
+
+		usb0_power: regulator@1 {
+			enable-active-high;
+		};
+
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+			     &pmx_led_usb_green
+			     &pmx_led_sys_green &pmx_led_sys_orange
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa325:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		orange-sys {
+			label = "nsa325:orange:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd1 {
+			label = "nsa325:green:hdd1";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd1 {
+			label = "nsa325:red:hdd1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd2 {
+			label = "nsa325:green:hdd2";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd2 {
+			label = "nsa325:red:hdd2";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa325:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa325:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa325:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+	/* The following pins are currently not assigned to a driver,
+	   some of them should be configured as inputs.
+	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
+		     &pmx_htp &pmx_vid_b1
+		     &pmx_power_resume_data &pmx_power_resume_clk>; */
+	};
+
+
+};
+
+&mdio {
+	status = "okay";
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
new file mode 100644
index 0000000000000..ea3d36512e9f3
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "ZyXEL NSA310";
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pmx_usb_power: pmx-usb-power {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_pwr_off: pmx-pwr-off {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_reset: pmx-btn-reset {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_copy: pmx-btn-copy {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_power: pmx-btn-power {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_green: pmx-led-copy-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_red: pmx-led-copy-red {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+		copy {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power>;
+		pinctrl-names = "default";
+
+		usb0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x0100000>;
+		read-only;
+	};
+	partition@100000 {
+		label = "uboot_env";
+		reg = <0x0100000 0x0080000>;
+	};
+	partition@180000 {
+		label = "key_store";
+		reg = <0x0180000 0x0080000>;
+	};
+	partition@200000 {
+		label = "info";
+		reg = <0x0200000 0x0080000>;
+	};
+	partition@280000 {
+		label = "etc";
+		reg = <0x0280000 0x0a00000>;
+	};
+	partition@c80000 {
+		label = "kernel_1";
+		reg = <0x0c80000 0x0a00000>;
+	};
+	partition@1680000 {
+		label = "rootfs1";
+		reg = <0x1680000 0x2fc0000>;
+	};
+	partition@4640000 {
+		label = "kernel_2";
+		reg = <0x4640000 0x0a00000>;
+	};
+	partition@5040000 {
+		label = "rootfs2";
+		reg = <0x5040000 0x2fc0000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
new file mode 100644
index 0000000000000..8ea430168ea54
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Plat'Home OpenBlocksA6";
+	compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			nr-ports = <1>;
+			status = "okay";
+		};
+
+		i2c@11100 {
+			status = "okay";
+
+			s35390a: s35390a@30 {
+				compatible = "sii,s35390a";
+				reg = <0x30>;
+			};
+		};
+
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_dip_switches>;
+			pinctrl-names = "default";
+
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11", "mpp15",
+					"mpp16";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14", "mpp8",
+					"mpp9";
+				marvell,function = "uart1";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_dip_switches: pmx-dip-switches {
+				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_header: pmx-gpio-header {
+				marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27",
+					       "mpp28", "mpp29", "mpp30", "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_init: pmx-init {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_oc: pmx-usb-oc {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp41", "mpp42", "mpp43";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-red {
+			label = "obsa6:red:stat";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-green {
+			label = "obsa6:green:stat";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-yellow {
+			label = "obsa6:yellow:stat";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+        };
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_gpio_init>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power {
+			label = "Init Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x90000>;
+	};
+
+	partition@90000 {
+		label = "env";
+		reg = <0x90000 0x44000>;
+	};
+
+	partition@d4000 {
+		label = "test";
+		reg = <0xd4000 0x20000>;
+	};
+
+	partition@f4000 {
+		label = "conf";
+		reg = <0xf4000 0x400000>;
+	};
+
+	partition@4f4000 {
+		label = "linux";
+		reg = <0x4f4000 0x1d20000>;
+	};
+
+	partition@2214000 {
+		label = "user";
+		reg = <0x2214000 0x1dec000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+
+	pinctrl-0 = <&pmx_gpio_header>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
new file mode 100644
index 0000000000000..946f0f453dd1a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for OpenBlocks A7 board
+ *
+ * Copyright (C) 2013 Free Electrons
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Plat'Home OpenBlocksA7";
+	compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			nr-ports = <1>;
+			status = "okay";
+		};
+
+		i2c@11100 {
+			status = "okay";
+
+			s24c02: s24c02@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header
+				     &pmx_gpio_header_gpo>;
+			pinctrl-names = "default";
+
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11", "mpp15",
+					"mpp16";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14", "mpp8",
+					"mpp9";
+				marvell,function = "uart1";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_dip_switches: pmx-dip-switches {
+				marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47";
+				marvell,function = "gpio";
+			};
+
+			/*
+			 * Accessible on connector J202. The MPP
+			 * listed below are pin 1-7, pin 8 is unused,
+			 * pin 9 is external reset input and pin 10 is
+			 * ground.
+			 */
+			pmx_gpio_header: pmx-gpio-header {
+				marvell,pins = "mpp17", "mpp29", "mpp28",
+					       "mpp35", "mpp34", "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_header_gpo: pxm-gpio-header-gpo {
+				marvell,pins = "mpp7";
+				marvell,function = "gpo";
+			};
+
+			pmx_gpio_init: pmx-init {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_oc: pmx-usb-oc {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp41", "mpp42", "mpp43";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-red {
+			label = "obsa7:red:stat";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-green {
+			label = "obsa7:green:stat";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-yellow {
+			label = "obsa7:yellow:stat";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+        };
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_gpio_init>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button {
+			label = "Init Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x1c0000>;
+	};
+
+	partition@1c0000 {
+		label = "env";
+		reg = <0x1c0000 0x2c0000>;
+	};
+
+	partition@480000 {
+		label = "test";
+		reg = <0x480000 0x160000>;
+	};
+
+	partition@5e0000 {
+		label = "conf";
+		reg = <0x5e0000 0x540000>;
+	};
+
+	partition@b20000 {
+		label = "linux";
+		reg = <0xb20000 0x3d40000>;
+	};
+
+	partition@4860000 {
+		label = "user";
+		reg = <0x4860000 0xb7a0000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openrd-base.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-base.dts
new file mode 100644
index 0000000000000..094191ece3d7e
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-base.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell OpenRD Base Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * base variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Base";
+	compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		serial@12100 {
+			status = "okay";
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
new file mode 100644
index 0000000000000..d4e0b8150a84c
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell OpenRD Client Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * client variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Client";
+	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		audio-controller@a0000 {
+			status = "okay";
+		};
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			cs42l51: cs42l51@4a {
+				compatible = "cirrus,cs42l51";
+				reg = <0x4a>;
+				#sound-dai-cells = <0>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio0 0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&cs42l51>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+	ethphy1: ethernet-phy@24 {
+		reg = <24>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openrd-ultimate.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-ultimate.dts
new file mode 100644
index 0000000000000..888e13320c190
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-ultimate.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell OpenRD Ultimate Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * ultimate variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Ultimate";
+	compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			cs42l51: cs42l51@4a {
+				compatible = "cirrus,cs42l51";
+				reg = <0x4a>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
new file mode 100644
index 0000000000000..47f03c69c55a5
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell OpenRD (Base|Client|Ultimate) Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
+			pinctrl-names = "default";
+
+			pmx_select28: pmx-select-rs232-rs485 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_select34: pmx-select-uart-sd {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+		mvsdio@90000 {
+			status = "okay";
+			cd-gpios = <&gpio0 29 9>;
+		};
+		gpio@10100 {
+			p28 {
+				gpio-hog;
+				gpios = <28 GPIO_ACTIVE_HIGH>;
+				/*
+				 * SelRS232or485 selects between RS-232 or RS-485
+				 * mode for the second UART.
+				 *
+				 * Low: RS-232
+				 * High: RS-485
+				 *
+				 * To use the second UART, you need to change also
+				 * the SelUARTorSD.
+				 */
+				output-low;
+				line-name = "SelRS232or485";
+			};
+		};
+		gpio@10140 {
+			p2 {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				/*
+				 * SelUARTorSD selects between the second UART
+				 * (serial@12100) and SD (mvsdio@90000).
+				 *
+				 * Low: UART
+				 * High: SD
+				 *
+				 * When changing this line make sure the newly
+				 * selected device node is enabled and the
+				 * previously selected device node is disabled.
+				 */
+				output-high; /* Select SD by default */
+				line-name = "SelUARTorSD";
+			};
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@600000 {
+		label = "root";
+		reg = <0x0600000 0x1FA00000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
new file mode 100644
index 0000000000000..f9e95e55f36dd
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02
+ *
+ * Copyright (C) 2015 Christoph Junghans <ottxor@gentoo.org>
+ *
+ * based on information of dts files from
+ *  Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com>
+ *  OpenWrt by Felix Kaechele <heffer@fedoraproject.org>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Cloud Engines Pogoplug E02";
+	compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "pogo_e02:green:health";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		fault {
+			label = "pogo_e02:orange:fault";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
+		      &pmx_led_green >;
+	pinctrl-names = "default";
+
+	pmx_usb_power_enable: pmx-usb-power-enable {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_green: pmx-led-green {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_orange: pmx-led-orange {
+		marvell,pins = "mpp49";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&nand {
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "pogoplug";
+		reg = <0x0500000 0x2000000>;
+	};
+
+	partition@2500000 {
+		label = "root";
+		reg = <0x02500000 0x5b00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
new file mode 100644
index 0000000000000..5aa4669ae2548
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4
+ * inspired by the board files made by Kevin Mihelich for ArchLinux,
+ * and their DTS file.
+ *
+ * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Cloud Engines PogoPlug Series 4";
+	compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = "uart0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_eject>;
+		pinctrl-names = "default";
+
+		eject {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_EJECTCD>;
+			label = "Eject Button";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
+		pinctrl-names = "default";
+
+		health {
+			label = "pogoplugv4:green:health";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		fault {
+			label = "pogoplugv4:red:fault";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl {
+	pmx_sata0: pmx-sata0 {
+		marvell,pins = "mpp21";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata1: pmx-sata1 {
+		marvell,pins = "mpp20";
+		marvell,function = "sata1";
+	};
+
+	pmx_sdio_cd: pmx-sdio-cd {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	pmx_sdio_wp: pmx-sdio-wp {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	pmx_button_eject: pmx-button-eject {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_green: pmx-led-green {
+		marvell,pins = "mpp22";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_red: pmx-led-red {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/*
+ * This PCIE controller has a USB 3.0 XHCI controller at 1,0
+ */
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	nr-ports = <1>;
+};
+
+&sdio {
+	status = "okay";
+	pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
+	pinctrl-names = "default";
+	cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+};
+
+&nand {
+	/* 128 MiB of NAND flash */
+	chip-delay = <40>;
+	status = "okay";
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x00000000 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "uImage";
+			reg = <0x00200000 0x300000>;
+		};
+
+		partition@500000 {
+			label = "uImage2";
+			reg = <0x00500000 0x300000>;
+		};
+
+		partition@800000 {
+			label = "failsafe";
+			reg = <0x00800000 0x800000>;
+		};
+
+		partition@1000000 {
+			label = "root";
+			reg = <0x01000000 0x7000000>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/marvell/kirkwood-rd88f6192.dts
new file mode 100644
index 0000000000000..f00325ffde078
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6192.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell RD88F6192 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "Marvell RD88F6192 reference design";
+	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_usb_power>;
+			pinctrl-names = "default";
+
+			pmx_usb_power: pmx-usb-power {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p128@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p128", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "USB VBUS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-a.dts
new file mode 100644
index 0000000000000..5da163591bbf4
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-a.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell RD88F6181 A Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions for the board with the A0 or
+ * higher stepping of the SoC. The ethernet switch does not have a
+ * "wan" port.
+ */
+
+/dts-v1/;
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+	model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
+	compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@11 {
+		 reg = <11>;
+	};
+};
+
+&switch {
+	reg = <10>;
+};
+
+&eth1 {
+	status = "okay";
+
+	ethernet1-port@0 {
+		 phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-z0.dts
new file mode 100644
index 0000000000000..72edd47e19ffc
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-z0.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell RD88F6181 Z0 stepping descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions for the board using the Z0
+ * stepping of the SoC. The ethernet switch has a "wan" port.
+*/
+
+/dts-v1/;
+
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+	model = "Marvell RD88f6281 Reference design, with Z0 SoC";
+	compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+};
+
+&eth1 {
+	status = "disabled";
+};
+
+&switch {
+	reg = <0>;
+
+	ports {
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281.dtsi
new file mode 100644
index 0000000000000..9d62f910cddf5
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell RD88F6181 Common Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are common between the two
+ * variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			/* No WP GPIO */
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x200000>;
+	};
+
+	partition@300000 {
+		label = "rootfs";
+		reg = <0x0300000 0x500000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch: switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-rs212.dts b/arch/arm/boot/dts/marvell/kirkwood-rs212.dts
new file mode 100644
index 0000000000000..4ad412115a241
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-rs212.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS212";
+	compatible = "synology,rs212", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-38 {
+		status = "okay";
+	};
+
+	regulators-hdd-30-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-rs409.dts b/arch/arm/boot/dts/marvell/kirkwood-rs409.dts
new file mode 100644
index 0000000000000..43673b03cb356
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-rs409.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS409";
+	compatible = "synology,rs409", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-rs411.dts b/arch/arm/boot/dts/marvell/kirkwood-rs411.dts
new file mode 100644
index 0000000000000..41fa63cec8398
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-rs411.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS411 RS812";
+	compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
new file mode 100644
index 0000000000000..0a698d3b73937
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_red: pmx-led-red {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_blue: pmx-led-blue {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_wp: pmx-sdio-wp {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x0500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts
new file mode 100644
index 0000000000000..ae8f493c9a0f3
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood-sheevaplug-common.dtsi"
+
+/ {
+	model = "Globalscale Technologies eSATA SheevaPlug";
+	compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_blue>;
+		pinctrl-names = "default";
+
+		health {
+			label = "sheevaplug:blue:health";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
new file mode 100644
index 0000000000000..c73cc904e5c4b
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood-sheevaplug-common.dtsi"
+
+/ {
+	model = "Globalscale Technologies SheevaPlug";
+	compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
+		pinctrl-names = "default";
+
+		health {
+			label = "sheevaplug:blue:health";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		misc {
+			label = "sheevaplug:red:misc";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
new file mode 100644
index 0000000000000..9b6666020cddf
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Nodes for Marvell 628x Synology devices
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_alarmled_12: pmx-alarmled-12 {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_15: pmx-fanctrl-15 {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_16: pmx-fanctrl-16 {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_17: pmx-fanctrl-17 {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_18: pmx-fanalarm-18 {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+
+			pmx_hddled_20: pmx-hddled-20 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_21: pmx-hddled-21 {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_22: pmx-hddled-22 {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_23: pmx-hddled-23 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_24: pmx-hddled-24 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_25: pmx-hddled-25 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_26: pmx-hddled-26 {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_27: pmx-hddled-27 {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_28: pmx-hddled-28 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_32: pmx-fanctrl-32 {
+				marvell,pins = "mpp32";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_33: pmx-fanctrl-33 {
+				marvell,pins = "mpp33";
+				marvell,function = "gpo";
+			};
+
+			pmx_fanctrl_34: pmx-fanctrl-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_35: pmx-fanalarm-35 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_36: pmx-hddled-36 {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_37: pmx-hddled-37 {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_38: pmx-hddled-38 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_39: pmx-hddled-39 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_40: pmx-hddled-40 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_41: pmx-hddled-41 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_42: pmx-hddled-42 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_43: pmx-hddled-43 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_44: pmx-hddled-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_45: pmx-hddled-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_44: pmx-fanalarm-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_45: pmx-fanalarm-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+		};
+
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p80", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x00000000 0x00080000>;
+					label = "RedBoot";
+				};
+
+				partition@80000 {
+					reg = <0x00080000 0x00200000>;
+					label = "zImage";
+				};
+
+				partition@280000 {
+					reg = <0x00280000 0x00140000>;
+					label = "rd.gz";
+				};
+
+				partition@3c0000 {
+					reg = <0x003c0000 0x00010000>;
+					label = "vendor";
+				};
+
+				partition@3d0000 {
+					reg = <0x003d0000 0x00020000>;
+					label = "RedBoot config";
+				};
+
+				partition@3f0000 {
+					reg = <0x003f0000 0x00010000>;
+					label = "FIS directory";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			rs5c372: rs5c372@32 {
+				status = "disabled";
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+
+			s35390a: s35390a@30 {
+				status = "disabled";
+				compatible = "sii,s35390a";
+				reg = <0x30>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+
+		poweroff@12100 {
+			compatible = "synology,power-off";
+			reg = <0x12100 0x100>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-fan-150-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-100-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
+			       &gpio1 12 GPIO_ACTIVE_HIGH
+			       &gpio1 13 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-leds-alarm-12 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_alarmled_12>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:alarm";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-20 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
+			     &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
+			     &pmx_hddled_26 &pmx_hddled_27>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-36 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
+			     &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
+			     &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
+			     &pmx_hddled_45>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-green {
+			label = "synology:green:hdd5";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-amber {
+			label = "synology:amber:hdd5";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-38 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators-hdd-29 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-1 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-2 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-4 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
+			     &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-31 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-34 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
+			     &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <9>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "disabled";
+
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-t5325.dts b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
new file mode 100644
index 0000000000000..ad093324e075a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HP t5325 Thin Client"
+ *
+ * Copyright (C) 2014
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "HP t5325 Thin Client";
+	compatible = "hp,t5325", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
+			pinctrl-names = "default";
+
+			pmx_button_power: pmx-button_power {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+			pmx_led: pmx-led {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_sata_power_enable: pmx-usb-sata-power-enable {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7";
+				marvell,function = "spi";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_i2s: pmx-i2s {
+				marvell,pins = "mpp39", "mpp40", "mpp41", "mpp42",
+					       "mpp43";
+				marvell,function = "audio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p80", "jedec,spi-nor";
+				spi-max-frequency = <86000000>;
+				reg = <0>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+
+				partition@1 {
+					reg = <0x80000 0x40000>;
+					label = "SSD firmware";
+				};
+
+				partition@2 {
+					reg = <0xc0000 0x10000>;
+					label = "u-boot env";
+				};
+
+				partition@3 {
+					reg = <0xd0000 0x10000>;
+					label = "permanent u-boot env";
+				};
+
+				partition@4 {
+					reg = <0xd0000 0x10000>;
+					label = "permanent u-boot env";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			alc5621: alc5621@1a {
+				compatible = "realtek,alc5621";
+				reg = <0x1a>;
+				#sound-dai-cells = <0>;
+				add-ctrl = <0x3700>;
+				jack-det-ctrl = <0x4810>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		audio: audio-controller@a0000 {
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_sata_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB-SATA Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_power>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Speaker", "SPKOUT",
+			"Speaker", "SPKOUTN",
+			"MIC1", "Mic Jack",
+			"MIC2", "Mic Jack";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker",
+			"Microphone", "Mic Jack";
+
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&alc5621>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-topkick.dts b/arch/arm/boot/dts/marvell/kirkwood-topkick.dts
new file mode 100644
index 0000000000000..a5b51e29f63ee
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-topkick.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Universal Scientific Industrial Co. Topkick-1281P2";
+	compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			/*
+			 * Switch positions
+			 *
+			 *     /-SW_LEFT(2)
+			 *     |
+			 *     |   /-SW_IDLE
+			 *     |   |
+			 *     |   |   /-SW_RIGHT
+			 *     |   |   |
+			 * PS [L] [I] [R] LEDS
+			 */
+			pinctrl-0 = <&pmx_sw_left &pmx_sw_right
+				     &pmx_sw_idle &pmx_sw_left2>;
+			pinctrl-names = "default";
+
+			pmx_led_disk_yellow: pmx-led-disk-yellow {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_sata0_pwr_enable: pmx-sata0-pwr-enable {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_blue: pmx-led-sys-blue {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_wifi_green: pmx-led-wifi-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_left: pmx-sw-left {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_right: pmx-sw-right {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_idle: pmx-sw-idle {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_left2: pmx-sw-left2 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_wifi_yellow: pmx-led-wifi-yellow {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		i2c@11000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		/*
+		 * GPIO LED layout
+		 *
+		 *       /-SYS_LED(2)
+		 *       |
+		 *       |   /-DISK_LED
+		 *       |   |
+		 *       |   |   /-WLAN_LED(2)
+		 *       |   |   |
+		 * [SW] [*] [*] [*]
+		 */
+
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_disk_yellow &pmx_led_sys_red
+			     &pmx_led_sys_blue &pmx_led_wifi_green
+			     &pmx_led_wifi_yellow>;
+		pinctrl-names = "default";
+
+		disk {
+			label = "topkick:yellow:disk";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
+		};
+		system2 {
+			label = "topkick:red:system";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+		system {
+			label = "topkick:blue:system";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		wifi {
+			label = "topkick:green:wifi";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+		wifi2 {
+			label = "topkick:yellow:wifi";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_pwr_enable>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 4 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+	};
+
+	partition@180000 {
+		label = "u-boot env";
+		reg = <0x0180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "uInitrd";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "rootfs";
+		reg = <0x1800000 0xe800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
new file mode 100644
index 0000000000000..30892c19aceb8
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
+			pinctrl-names = "default";
+
+			pmx_ram_size: pmx-ram-size {
+				/* RAM: 0: 256 MB, 1: 512 MB */
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_board_id: pmx-board-id {
+				/* 0: TS-11x, 1: TS-21x */
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+		pinctrl-names = "default";
+
+		copy {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
new file mode 100644
index 0000000000000..aba1205981f1e
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
+			pinctrl-names = "default";
+
+			pmx_ram_size: pmx-ram-size {
+				/* RAM: 0: 256 MB, 1: 512 MB */
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_board_id: pmx-board-id {
+				/* 0: TS-11x, 1: TS-21x */
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+		pinctrl-names = "default";
+
+		copy {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
+
+&pcie1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts219.dtsi
new file mode 100644
index 0000000000000..1939462a5f487
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	model = "QNAP TS219 family";
+	compatible = "qnap,ts219", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			s35390a: s35390a@30 {
+				compatible = "s35390a";
+				reg = <0x30>;
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+		serial@12100 {
+			status = "okay";
+		};
+		poweroff@12100 {
+			compatible = "qnap,power-off";
+			reg = <0x12100 0x100>;
+			clocks = <&gate_clk 7>;
+		};
+		spi@10600 {
+			status = "okay";
+
+			m25p128@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "m25p128", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x00000000 0x00080000>;
+					label = "U-Boot";
+				};
+
+				partition@200000 {
+					reg = <0x00200000 0x00200000>;
+					label = "Kernel";
+				};
+
+				partition@400000 {
+					reg = <0x00400000 0x00900000>;
+					label = "RootFS1";
+				};
+				partition@d00000 {
+					reg = <0x00d00000 0x00300000>;
+					label = "RootFS2";
+				};
+				partition@40000 {
+					reg = <0x00080000 0x00040000>;
+					label = "U-Boot Config";
+				};
+				partition@c0000 {
+					reg = <0x000c0000 0x00140000>;
+					label = "NAS Config";
+				};
+			};
+		};
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@X {
+		/* overwrite reg property in board file */
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&rtc {
+	/*
+	 * There is a s35390a available on the i2c bus, the internal rtc isn't
+	 * working (probably no crystal assembled).
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts419-6281.dts
new file mode 100644
index 0000000000000..4a42ebcca4f05
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419-6281.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for QNAP TS41X with 6281 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+&ethphy0 { reg = <8>; };
+&ethphy1 { reg = <0>; };
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts419-6282.dts
new file mode 100644
index 0000000000000..be772e194c2b0
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419-6282.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for QNAP TS41X with 6282 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+&ethphy0 { reg = <0>; };
+&ethphy1 { reg = <1>; };
+
+&pciec { status = "okay"; };
+&pcie1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
new file mode 100644
index 0000000000000..717236853e458
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree include file for QNAP TS41X
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ */
+
+/ {
+	model = "QNAP TS419 family";
+	compatible = "qnap,ts419", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			/*
+			 * JP1 indicates if an LCD module is installed
+			 * on the serial port (0), or if the port is used
+			 * as a console (1).
+			 */
+			pmx_jumper_jp1: pmx-jumper_jp1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+		pinctrl-names = "default";
+
+		copy {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood.dtsi b/arch/arm/boot/dts/marvell/kirkwood.dtsi
new file mode 100644
index 0000000000000..815ef7719d13c
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood.dtsi
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "marvell,kirkwood";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,feroceon";
+			reg = <0>;
+			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
+			clock-names = "cpu_clk", "ddrclk", "powersave";
+		};
+	};
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		i2c0 = &i2c0;
+	};
+
+	mbus@f1000000 {
+		compatible = "marvell,kirkwood-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/* If a board file needs to change this ranges it must replace it completely */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000	/* internal-regs */
+			  MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000	/* nand flash */
+			  MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000	/* crypto sram */
+			  >;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
+		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
+
+		nand: nand@12f {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cle = <0>;
+			ale = <1>;
+			bank-width = <1>;
+			compatible = "marvell,orion-nand";
+			reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
+			chip-delay = <25>;
+			/* set partition map and/or chip-delay in board dts */
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_nand>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		crypto_sram: sa-sram@301 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
+			clocks = <&gate_clk 17>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+
+	ocp@f1000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf1000000 0x0100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pinctrl: pin-controller@10000 {
+			/* set compatible property in SoC file */
+			reg = <0x10000 0x20>;
+
+			pmx_ge1: pmx-ge1 {
+				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
+					       "mpp24", "mpp25", "mpp26", "mpp27",
+					       "mpp30", "mpp31", "mpp32", "mpp33";
+				marvell,function = "ge1";
+			};
+
+			pmx_nand: pmx-nand {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+					       "mpp4", "mpp5", "mpp18", "mpp19";
+				marvell,function = "nand";
+			};
+
+			/*
+			 * Default SPI0 pinctrl setting with CSn on mpp0,
+			 * overwrite marvell,pins on board level if required.
+			 */
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+				marvell,function = "spi";
+			};
+
+			pmx_twsi0: pmx-twsi0 {
+				marvell,pins = "mpp8", "mpp9";
+				marvell,function = "twsi0";
+			};
+
+			/*
+			 * Default UART pinctrl setting without RTS/CTS,
+			 * overwrite marvell,pins on board level if required.
+			 */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14";
+				marvell,function = "uart1";
+			};
+		};
+
+		core_clk: core-clocks@10030 {
+			compatible = "marvell,kirkwood-core-clock";
+			reg = <0x10030 0x4>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <23>;
+			reg = <0x10600 0x28>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_spi>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		gpio0: gpio@10100 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10100 0x40>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <35>, <36>, <37>, <38>;
+			clocks = <&gate_clk 7>;
+		};
+
+		gpio1: gpio@10140 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10140 0x40>;
+			ngpios = <18>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <39>, <40>, <41>;
+			clocks = <&gate_clk 7>;
+		};
+
+		i2c0: i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <29>;
+			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_twsi0>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <33>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		uart1: serial@12100 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <34>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		mbusc: mbus-controller@20000 {
+			compatible = "marvell,mbus-controller";
+			reg = <0x20000 0x80>, <0x1500 0x20>;
+		};
+
+		sysc: system-controller@20000 {
+			compatible = "marvell,orion-system-controller";
+			reg = <0x20000 0x120>;
+		};
+
+		bridge_intc: bridge-interrupt-ctrl@20110 {
+			compatible = "marvell,orion-bridge-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20110 0x8>;
+			interrupts = <1>;
+			marvell,#interrupts = <6>;
+		};
+
+		gate_clk: clock-gating-control@2011c {
+			compatible = "marvell,kirkwood-gating-clock";
+			reg = <0x2011c 0x4>;
+			clocks = <&core_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		l2: l2-cache@20128 {
+			compatible = "marvell,kirkwood-cache";
+			reg = <0x20128 0x4>;
+		};
+
+		intc: interrupt-controller@20200 {
+			compatible = "marvell,orion-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20200 0x10>, <0x20210 0x10>;
+		};
+
+		timer: timer@20300 {
+			compatible = "marvell,orion-timer";
+			reg = <0x20300 0x20>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <1>, <2>;
+			clocks = <&core_clk 0>;
+		};
+
+		wdt: watchdog-timer@20300 {
+			compatible = "marvell,orion-wdt";
+			reg = <0x20300 0x28>, <0x20108 0x4>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <3>;
+			clocks = <&gate_clk 7>;
+			status = "okay";
+		};
+
+		cesa: crypto@30000 {
+			compatible = "marvell,kirkwood-crypto";
+			reg = <0x30000 0x10000>;
+			reg-names = "regs";
+			interrupts = <22>;
+			clocks = <&gate_clk 17>;
+			marvell,crypto-srams = <&crypto_sram>;
+			marvell,crypto-sram-size = <0x800>;
+			status = "okay";
+		};
+
+		usb0: ehci@50000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0x50000 0x1000>;
+			interrupts = <19>;
+			clocks = <&gate_clk 3>;
+			status = "okay";
+		};
+
+		dma0: xor@60800 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60800 0x100
+			       0x60A00 0x100>;
+			status = "okay";
+			clocks = <&gate_clk 8>;
+
+			xor00 {
+				interrupts = <5>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+			xor01 {
+				interrupts = <6>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
+			};
+		};
+
+		dma1: xor@60900 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60900 0x100
+			       0x60B00 0x100>;
+			status = "okay";
+			clocks = <&gate_clk 16>;
+
+			xor00 {
+				interrupts = <7>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+			xor01 {
+				interrupts = <8>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
+			};
+		};
+
+		eth0: ethernet-controller@72000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72000 0x4000>;
+			clocks = <&gate_clk 0>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			eth0port: ethernet0-port@0 {
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <11>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
+
+		mdio: mdio-bus@72004 {
+			compatible = "marvell,orion-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72004 0x84>;
+			interrupts = <46>;
+			clocks = <&gate_clk 0>;
+			status = "disabled";
+
+			/* add phy nodes in board file */
+		};
+
+		eth1: ethernet-controller@76000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x76000 0x4000>;
+			clocks = <&gate_clk 19>;
+			marvell,tx-checksum-limit = <1600>;
+			pinctrl-0 = <&pmx_ge1>;
+			pinctrl-names = "default";
+			status = "disabled";
+
+			eth1port: ethernet1-port@0 {
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <15>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
+
+		sata_phy0: sata-phy@82000 {
+			compatible = "marvell,mvebu-sata-phy";
+			reg = <0x82000 0x0334>;
+			clocks = <&gate_clk 14>;
+			clock-names = "sata";
+			#phy-cells = <0>;
+			status = "okay";
+		};
+
+		sata_phy1: sata-phy@84000 {
+			compatible = "marvell,mvebu-sata-phy";
+			reg = <0x84000 0x0334>;
+			clocks = <&gate_clk 15>;
+			clock-names = "sata";
+			#phy-cells = <0>;
+			status = "okay";
+		};
+
+		audio0: audio-controller@a0000 {
+			compatible = "marvell,kirkwood-audio";
+			#sound-dai-cells = <0>;
+			reg = <0xa0000 0x2210>;
+			interrupts = <24>;
+			clocks = <&gate_clk 9>;
+			clock-names = "internal";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/mmp2-brownstone.dts b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
new file mode 100644
index 0000000000000..04f1ae1382e7a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+/dts-v1/;
+#include "mmp2.dtsi"
+
+/ {
+	model = "Marvell MMP2 Brownstone Development Board";
+	compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
+
+	chosen {
+		bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+	pmic: max8925@3c {
+		compatible = "maxium,max8925";
+		reg = <0x3c>;
+		interrupts = <1>;
+		interrupt-parent = <&intcmux4>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		maxim,tsc-irq = <0>;
+
+		regulators {
+			SDV1 {
+				regulator-min-microvolt = <637500>;
+				regulator-max-microvolt = <1425000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			SDV2 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			SDV3 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO1 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO2 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO3 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO4 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO5 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO6 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO7 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO8 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO9 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO10 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+			};
+			LDO11 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO12 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO13 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO14 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO15 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO16 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO17 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO18 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO19 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO20 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+		backlight {
+			maxim,max8925-dual-string = <0>;
+		};
+		charger {
+			batt-detect = <0>;
+			topoff-threshold = <1>;
+			fast-charge = <7>;
+			no-temp-support = <0>;
+			no-insert-detect = <0>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts
new file mode 100644
index 0000000000000..55ea87870af3e
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * OLPC XO 1.75 Laptop.
+ *
+ * Copyright (C) 2018,2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+/dts-v1/;
+#include "mmp2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/marvell,mmp2-audio.h>
+
+/ {
+	model = "OLPC XO-1.75";
+	compatible = "olpc,xo-1.75", "mrvl,mmp2";
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@1fc00000 {
+			compatible = "simple-framebuffer";
+			reg = <0x1fc00000 (1200 * 900 * 2)>;
+			width = <1200>;
+			height = <900>;
+			stride = <(1200 * 2)>;
+			format = "r5g6b5";
+			clocks = <&soc_clocks MMP2_CLK_DISP0_LCDC>,
+				 <&soc_clocks MMP2_CLK_DISP0>;
+		};
+	};
+
+	memory@0 {
+		available = <0xcf000 0x1ef31000 0x1000 0xbf000>;
+		reg = <0x0 0x20000000>;
+		device_type = "memory";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio 129 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+		};
+
+		tablet_mode {
+			label = "E-Book Mode";
+			gpios = <&gpio 128 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			wakeup-source;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-gpio,timeout-ms = <1000>;
+		status = "okay";
+
+		camera@21 {
+			compatible = "ovti,ov7670";
+			reg = <0x21>;
+			reset-gpios = <&gpio 102 GPIO_ACTIVE_LOW>;
+			powerdown-gpios = <&gpio 150 GPIO_ACTIVE_LOW>;
+			clocks = <&camera0>;
+			clock-names = "xclk";
+
+			port {
+				ov7670_0: endpoint {
+					hsync-active = <1>;
+					vsync-active = <1>;
+					remote-endpoint = <&camera0_0>;
+				};
+			};
+		};
+	};
+
+	battery {
+		compatible = "olpc,xo1.5-battery", "olpc,xo1-battery";
+	};
+
+	wlan_reg: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio 34 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wlan_pwrseq: pwrseq0 {
+		compatible = "mmc-pwrseq-sd8787";
+		powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound-card {
+		compatible = "audio-graph-card";
+		label = "OLPC XO";
+		dais = <&sspa0_dai>;
+		routing = "Headphones", "HPOL",
+			  "Headphones", "HPOR",
+			  "MIC2", "Mic Jack";
+		widgets = "Headphone", "Headphones", "Microphone", "Mic Jack";
+		hp-det-gpio = <&gpio 97 GPIO_ACTIVE_HIGH>;
+		mic-det-gpio = <&gpio 96 GPIO_ACTIVE_HIGH>;
+	};
+
+	soc {
+		axi@d4200000 {
+			ap-sp@d4290000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "olpc,ap-sp";
+				interrupts = <40>;
+				reg = <0xd4290000 0x1000>;
+				data-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>;
+				clk-gpios = <&gpio 71 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb_otg0 {
+	status = "okay";
+};
+
+&mmc1 {
+	clock-frequency = <50000000>;
+	no-1-8-v;
+	mrvl,clk-delay-cycles = <31>;
+	broken-cd;
+	status = "okay";
+};
+
+&mmc2 {
+	clock-frequency = <50000000>;
+	no-1-8-v;
+	bus-width = <4>;
+	non-removable;
+	broken-cd;
+	wakeup-source;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&wlan_reg>;
+	status = "okay";
+};
+
+&mmc3 {
+	clock-frequency = <50000000>;
+	no-1-8-v;
+	bus-width = <8>;
+	non-removable;
+	broken-cd;
+	mrvl,clk-delay-cycles = <31>;
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+
+	audio-codec@1a {
+		compatible = "realtek,alc5631";
+		reg = <0x1a>;
+		status = "okay";
+
+		port {
+			rt5631_0: endpoint {
+				mclk-fs = <256>;
+				clocks = <&audio_clk MMP2_CLK_AUDIO_SYSCLK>;
+				remote-endpoint = <&sspa0_0>;
+			};
+		};
+	};
+};
+
+&twsi2 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+		status = "okay";
+	};
+};
+
+&twsi6 {
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x1d>;
+		status = "okay";
+	};
+};
+
+&ssp3 {
+	#address-cells = <0>;
+	spi-slave;
+	status = "okay";
+	ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
+
+	slave {
+		compatible = "olpc,xo1.75-ec";
+		spi-cpha;
+		cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&camera0 {
+	status = "okay";
+
+	port {
+		camera0_0: endpoint {
+			remote-endpoint = <&ov7670_0>;
+		};
+	};
+};
+
+&asram {
+	status = "okay";
+};
+
+&adma0 {
+	status = "okay";
+};
+
+&audio_clk {
+	status = "okay";
+};
+
+&sspa0 {
+	status = "okay";
+	dmas = <&adma0 0>, <&adma0 1>;
+	dma-names = "tx", "rx";
+
+	sspa0_dai: port {
+		sspa0_0: endpoint {
+			remote-endpoint = <&rt5631_0>;
+			frame-master;
+			bitclock-master;
+			dai-format = "i2s";
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/mmp2.dtsi b/arch/arm/boot/dts/marvell/mmp2.dtsi
new file mode 100644
index 0000000000000..987d792f67eaf
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/mmp2.dtsi
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <dt-bindings/clock/marvell,mmp2.h>
+#include <dt-bindings/power/marvell,mmp2.h>
+#include <dt-bindings/clock/marvell,mmp2-audio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		L2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0x3>;
+		};
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			gpu: gpu@d420d000 {
+				compatible = "vivante,gc";
+				reg = <0xd420d000 0x4000>;
+				interrupts = <8>;
+				status = "disabled";
+				clocks = <&soc_clocks MMP2_CLK_GPU_3D>,
+					 <&soc_clocks MMP2_CLK_GPU_BUS>;
+				clock-names = "core", "bus";
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
+			};
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp2-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+			intcmux4: interrupt-controller@d4282150 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <4>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x150 0x4>, <0x168 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux5: interrupt-controller@d4282154 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <5>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x154 0x4>, <0x16c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+				mrvl,clr-mfp-irq = <1>;
+			};
+
+			intcmux9: interrupt-controller@d4282180 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <9>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x180 0x4>, <0x17c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <3>;
+			};
+
+			intcmux17: interrupt-controller@d4282158 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <17>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x158 0x4>, <0x170 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <5>;
+			};
+
+			intcmux35: interrupt-controller@d428215c {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <35>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x15c 0x4>, <0x174 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <15>;
+			};
+
+			intcmux51: interrupt-controller@d4282160 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <51>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x160 0x4>, <0x178 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux55: interrupt-controller@d4282188 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <55>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x188 0x4>, <0x184 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			usb_phy0: usb-phy@d4207000 {
+				compatible = "marvell,mmp2-usb-phy";
+				reg = <0xd4207000 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb_otg0: usb-otg@d4208000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xd4208000 0x200>;
+				interrupts = <44>;
+				clocks = <&soc_clocks MMP2_CLK_USB>;
+				clock-names = "USBCLK";
+				phys = <&usb_phy0>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			mmc1: mmc@d4280000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH0>;
+				clock-names = "io";
+				interrupts = <39>;
+				status = "disabled";
+			};
+
+			mmc2: mmc@d4280800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH1>;
+				clock-names = "io";
+				interrupts = <52>;
+				status = "disabled";
+			};
+
+			mmc3: mmc@d4281000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH2>;
+				clock-names = "io";
+				interrupts = <53>;
+				status = "disabled";
+			};
+
+			mmc4: mmc@d4281800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH3>;
+				clock-names = "io";
+				interrupts = <54>;
+				status = "disabled";
+			};
+
+			camera0: camera@d420a000 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a000 0x800>;
+				interrupts = <42>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+				clock-names = "axi";
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			camera1: camera@d420a800 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a800 0x800>;
+				interrupts = <30>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC1>;
+				clock-names = "axi";
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			adma0: dma-controller@d42a0800 {
+				compatible = "marvell,adma-1.0";
+				reg = <0xd42a0800 0x100>;
+				interrupts = <48>;
+				#dma-cells = <1>;
+				asram = <&asram>;
+				iram = <&asram>;
+				status = "disabled";
+			};
+
+			adma1: dma-controller@d42a0900 {
+				compatible = "marvell,adma-1.0";
+				reg = <0xd42a0900 0x100>;
+				interrupts = <48>;
+				#dma-cells = <1>;
+				status = "disabled";
+			};
+
+			audio_clk: clocks@d42a0c30 {
+				compatible = "marvell,mmp2-audio-clock";
+				reg = <0xd42a0c30 0x10>;
+				clock-names = "audio", "vctcxo", "i2s0", "i2s1";
+				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+					 <&soc_clocks MMP2_CLK_VCTCXO>,
+					 <&soc_clocks MMP2_CLK_I2S0>,
+					 <&soc_clocks MMP2_CLK_I2S1>;
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+				#clock-cells = <1>;
+				status = "disabled";
+			};
+
+			sspa0: audio-controller@d42a0c00 {
+				compatible = "marvell,mmp-sspa";
+				reg = <0xd42a0c00 0x30>,
+				      <0xd42a0c80 0x30>;
+				interrupts = <2>;
+				clock-names = "audio", "bitclk";
+				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+					 <&audio_clk MMP2_CLK_AUDIO_SSPA0>;
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sspa1: audio-controller@d42a0d00 {
+				compatible = "marvell,mmp-sspa";
+				reg = <0xd42a0d00 0x30>,
+				      <0xd42a0d80 0x30>;
+				interrupts = <3>;
+				clock-names = "audio", "bitclk";
+				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+					 <&audio_clk MMP2_CLK_AUDIO_SSPA1>;
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			dma-controller@d4000000 {
+				compatible = "marvell,pdma-1.0";
+				reg = <0xd4000000 0x10000>;
+				interrupts = <48>;
+				/* For backwards compatibility: */
+				#dma-channels = <16>;
+				dma-channels = <16>;
+				status = "disabled";
+			};
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+				clocks = <&soc_clocks MMP2_CLK_TIMER>;
+			};
+
+			uart1: serial@d4030000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4030000 0x1000>;
+				interrupts = <27>;
+				clocks = <&soc_clocks MMP2_CLK_UART0>;
+				resets = <&soc_clocks MMP2_CLK_UART0>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart2: serial@d4017000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <28>;
+				clocks = <&soc_clocks MMP2_CLK_UART1>;
+				resets = <&soc_clocks MMP2_CLK_UART1>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart3: serial@d4018000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <24>;
+				clocks = <&soc_clocks MMP2_CLK_UART2>;
+				resets = <&soc_clocks MMP2_CLK_UART2>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart4: serial@d4016000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4016000 0x1000>;
+				interrupts = <46>;
+				clocks = <&soc_clocks MMP2_CLK_UART3>;
+				resets = <&soc_clocks MMP2_CLK_UART3>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			gpio: gpio@d4019000 {
+				compatible = "marvell,mmp2-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				interrupt-names = "gpio_mux";
+				clocks = <&soc_clocks MMP2_CLK_GPIO>;
+				resets = <&soc_clocks MMP2_CLK_GPIO>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+
+				gcb4: gpio@d4019104 {
+					reg = <0xd4019104 0x4>;
+				};
+
+				gcb5: gpio@d4019108 {
+					reg = <0xd4019108 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI0>;
+				resets = <&soc_clocks MMP2_CLK_TWSI0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4031000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4031000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <0>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
+				resets = <&soc_clocks MMP2_CLK_TWSI1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi3: i2c@d4032000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4032000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <1>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI2>;
+				resets = <&soc_clocks MMP2_CLK_TWSI2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi4: i2c@d4033000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <2>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI3>;
+				resets = <&soc_clocks MMP2_CLK_TWSI3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+
+			twsi5: i2c@d4033800 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033800 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <3>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI4>;
+				resets = <&soc_clocks MMP2_CLK_TWSI4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi6: i2c@d4034000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4034000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <4>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI5>;
+				resets = <&soc_clocks MMP2_CLK_TWSI5>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <1>, <0>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				interrupt-parent = <&intcmux5>;
+				clocks = <&soc_clocks MMP2_CLK_RTC>;
+				resets = <&soc_clocks MMP2_CLK_RTC>;
+				status = "disabled";
+			};
+
+			ssp1: spi@d4035000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4035000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP0>;
+				interrupts = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp2: spi@d4036000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4036000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP1>;
+				interrupts = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp3: spi@d4037000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4037000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP2>;
+				interrupts = <20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp4: spi@d4039000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4039000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP3>;
+				interrupts = <21>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		asram: sram@e0000000 {
+			compatible = "mmio-sram";
+			reg = <0xe0000000 0x10000>;
+			ranges = <0 0xe0000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		soc_clocks: clocks {
+			compatible = "marvell,mmp2-clock";
+			reg = <0xd4050000 0x2000>,
+			      <0xd4282800 0x400>,
+			      <0xd4015000 0x1000>;
+			reg-names = "mpmu", "apmu", "apbc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/mmp3-dell-ariel.dts b/arch/arm/boot/dts/marvell/mmp3-dell-ariel.dts
new file mode 100644
index 0000000000000..fe6df364a9eb6
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/mmp3-dell-ariel.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Dell Wyse 3020 a.k.a. "Ariel" a.k.a. Tx0D (T00D, T10D)
+ *
+ * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+/dts-v1/;
+#include "mmp3.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Dell Ariel";
+	compatible = "dell,wyse-ariel", "marvell,mmp3";
+
+	aliases {
+		serial2 = &uart3;
+	};
+
+	chosen {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+		bootargs = "earlyprintk=ttyS2,115200 console=ttyS2,115200";
+	};
+
+	memory@0 {
+		available = <0x7f700000 0x7ff00000 0x00000000 0x7f600000>;
+		reg = <0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	ec_input_spi: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		num-chipselects = <0>;
+		sck-gpios = <&gpio 55 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&usb_otg0 {
+	status = "okay";
+};
+
+&usb_otg_phy0 {
+	status = "okay";
+};
+
+&hsic0 {
+	status = "okay";
+
+	usb1@1 {
+		compatible = "usb424,2640";
+		reg = <0x01>;
+		#address-cells = <0x01>;
+		#size-cells = <0x00>;
+
+		mass-storage@1 {
+			compatible = "usb424,4040";
+			reg = <0x01>;
+			status = "disabled";
+		};
+	};
+};
+
+&hsic_phy0 {
+	status = "okay";
+	reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc3 {
+	status = "okay";
+	max-frequency = <50000000>;
+	status = "okay";
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-highspeed;
+};
+
+&twsi1 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+		status = "okay";
+	};
+};
+
+&twsi3 {
+	status = "okay";
+};
+
+&twsi4 {
+	status = "okay";
+
+	embedded-controller@58 {
+		compatible = "dell,wyse-ariel-ec", "ene,kb3930";
+		reg = <0x58>;
+		system-power-controller;
+
+		off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>,
+			    <&gpio 127 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ssp1 {
+	status = "okay";
+	cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+
+	firmware-flash@0 {
+		compatible = "winbond,w25q32", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+	};
+};
+
+&ec_input_spi {
+	status = "okay";
+	cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+
+	power-button@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio>;
+		interrupts = <60 IRQ_TYPE_EDGE_RISING>;
+		compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input";
+		spi-max-frequency = <33000000>;
+	};
+};
+
+&gpu_2d {
+	status = "okay";
+};
+
+&gpu_3d {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/mmp3.dtsi b/arch/arm/boot/dts/marvell/mmp3.dtsi
new file mode 100644
index 0000000000000..a4fb9203ec1fb
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/mmp3.dtsi
@@ -0,0 +1,608 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ *  Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+#include <dt-bindings/clock/marvell,mmp2.h>
+#include <dt-bindings/power/marvell,mmp2.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,mmp3-smp";
+
+		cpu@0 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		axi@d4200000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			interrupt-controller@d4282000 {
+				compatible = "marvell,mmp3-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>,
+				      <0xd4284000 0x100>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+			pmic_mux: interrupt-controller@d4282150 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x150 0x4>, <0x168 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <4>;
+			};
+
+			rtc_mux: interrupt-controller@d4282154 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x154 0x4>, <0x16c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			hsi3_mux: interrupt-controller@d42821bc {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1bc 0x4>, <0x1a4 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <3>;
+			};
+
+			gpu_mux: interrupt-controller@d42821c0 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1c0 0x4>, <0x1a8 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <3>;
+			};
+
+			twsi_mux: interrupt-controller@d4282158 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x158 0x4>, <0x170 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <5>;
+			};
+
+			hsi2_mux: interrupt-controller@d42821c4 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1c4 0x4>, <0x1ac 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			dxo_mux: interrupt-controller@d42821c8 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1c8 0x4>, <0x1b0 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			misc1_mux: interrupt-controller@d428215c {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x15c 0x4>, <0x174 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <31>;
+			};
+
+			ci_mux: interrupt-controller@d42821cc {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1cc 0x4>, <0x1b4 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			ssp_mux: interrupt-controller@d4282160 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x160 0x4>, <0x178 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			hsi1_mux: interrupt-controller@d4282184 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x184 0x4>, <0x17c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <4>;
+			};
+
+			misc2_mux: interrupt-controller@d4282188 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x188 0x4>, <0x180 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <20>;
+			};
+
+			hsi0_mux: interrupt-controller@d42821d0 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1d0 0x4>, <0x1b8 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <5>;
+			};
+
+			usb_otg_phy0: usb-phy@d4207000 {
+				compatible = "marvell,mmp3-usb-phy";
+				reg = <0xd4207000 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb_otg0: usb@d4208000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xd4208000 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_USB>;
+				clock-names = "USBCLK";
+				phys = <&usb_otg_phy0>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			hsic_phy0: usb-phy@f0001800 {
+				compatible = "marvell,mmp3-hsic-phy";
+				reg = <0xf0001800 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			hsic0: usb@f0001000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xf0001000 0x200>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_USBHSIC0>;
+				clock-names = "USBCLK";
+				phys = <&hsic_phy0>;
+				phy-names = "usb";
+				phy_type = "hsic";
+				#address-cells = <0x01>;
+				#size-cells = <0x00>;
+				status = "disabled";
+			};
+
+			hsic_phy1: usb-phy@f0002800 {
+				compatible = "marvell,mmp3-hsic-phy";
+				reg = <0xf0002800 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			hsic1: usb@f0002000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xf0002000 0x200>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_USBHSIC1>;
+				clock-names = "USBCLK";
+				phys = <&hsic_phy1>;
+				phy-names = "usb";
+				phy_type = "hsic";
+				#address-cells = <0x01>;
+				#size-cells = <0x00>;
+				status = "disabled";
+			};
+
+			mmc1: mmc@d4280000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH0>;
+				clock-names = "io";
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			mmc2: mmc@d4280800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH1>;
+				clock-names = "io";
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			mmc3: mmc@d4281000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH2>;
+				clock-names = "io";
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			mmc4: mmc@d4281800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH3>;
+				clock-names = "io";
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			mmc5: mmc@d4217000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4217000 0x120>;
+				clocks = <&soc_clocks MMP3_CLK_SDH4>;
+				clock-names = "io";
+				interrupt-parent = <&hsi1_mux>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			camera0: camera@d420a000 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a000 0x800>;
+				interrupts = <1>;
+				interrupt-parent = <&ci_mux>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+				clock-names = "axi";
+				power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			camera1: camera@d420a800 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a800 0x800>;
+				interrupts = <2>;
+				interrupt-parent = <&ci_mux>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC1>;
+				clock-names = "axi";
+				power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			gpu_3d: gpu@d420d000 {
+				compatible = "vivante,gc";
+				reg = <0xd420d000 0x2000>;
+				interrupt-parent = <&gpu_mux>;
+				interrupts = <0>;
+				status = "disabled";
+				clocks = <&soc_clocks MMP3_CLK_GPU_3D>,
+					 <&soc_clocks MMP3_CLK_GPU_BUS>;
+				clock-names = "core", "bus";
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
+			};
+
+			gpu_2d: gpu@d420f000 {
+				compatible = "vivante,gc";
+				reg = <0xd420f000 0x2000>;
+				interrupt-parent = <&gpu_mux>;
+				interrupts = <2>;
+				status = "disabled";
+				clocks = <&soc_clocks MMP3_CLK_GPU_2D>,
+					 <&soc_clocks MMP3_CLK_GPU_BUS>;
+				clock-names = "core", "bus";
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
+			};
+		};
+
+		apb@d4000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_TIMER>;
+			};
+
+			uart1: serial@d4030000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4030000 0x1000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_UART0>;
+				resets = <&soc_clocks MMP2_CLK_UART0>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart2: serial@d4017000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_UART1>;
+				resets = <&soc_clocks MMP2_CLK_UART1>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart3: serial@d4018000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_UART2>;
+				resets = <&soc_clocks MMP2_CLK_UART2>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart4: serial@d4016000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4016000 0x1000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_UART3>;
+				resets = <&soc_clocks MMP2_CLK_UART3>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			gpio: gpio@d4019000 {
+				compatible = "marvell,mmp2-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "gpio_mux";
+				clocks = <&soc_clocks MMP2_CLK_GPIO>;
+				resets = <&soc_clocks MMP2_CLK_GPIO>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+
+				gcb4: gpio@d4019104 {
+					reg = <0xd4019104 0x4>;
+				};
+
+				gcb5: gpio@d4019108 {
+					reg = <0xd4019108 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x70>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI0>;
+				resets = <&soc_clocks MMP2_CLK_TWSI0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4031000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4031000 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <0>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
+				resets = <&soc_clocks MMP2_CLK_TWSI1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi3: i2c@d4032000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4032000 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <1>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI2>;
+				resets = <&soc_clocks MMP2_CLK_TWSI2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi4: i2c@d4033000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033000 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <2>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI3>;
+				resets = <&soc_clocks MMP2_CLK_TWSI3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+
+			twsi5: i2c@d4033800 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033800 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <3>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI4>;
+				resets = <&soc_clocks MMP2_CLK_TWSI4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi6: i2c@d4034000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4034000 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <4>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI5>;
+				resets = <&soc_clocks MMP2_CLK_TWSI5>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <1>, <0>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				interrupt-parent = <&rtc_mux>;
+				clocks = <&soc_clocks MMP2_CLK_RTC>;
+				resets = <&soc_clocks MMP2_CLK_RTC>;
+				status = "disabled";
+			};
+
+			ssp1: spi@d4035000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4035000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP0>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp2: spi@d4036000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4036000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP1>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp3: spi@d4037000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4037000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP2>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp4: spi@d4039000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4039000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP3>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		l2: cache-controller@d0020000 {
+			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
+			reg = <0xd0020000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		soc_clocks: clocks@d4050000 {
+			compatible = "marvell,mmp3-clock";
+			reg = <0xd4050000 0x2000>,
+			      <0xd4282800 0x400>,
+			      <0xd4015000 0x1000>;
+			reg-names = "mpmu", "apmu", "apbc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		snoop-control-unit@e0000000 {
+			compatible = "arm,arm11mp-scu";
+			reg = <0xe0000000 0x100>;
+		};
+
+		gic: interrupt-controller@e0001000 {
+			compatible = "arm,arm11mp-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xe0001000 0x1000>,
+			      <0xe0000100 0x100>;
+		};
+
+		local-timer@e0000600 {
+			compatible = "arm,arm11mp-twd-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			reg = <0xe0000600 0x20>;
+		};
+
+		watchdog@e0000620 {
+			compatible = "arm,arm11mp-twd-wdt";
+			reg = <0xe0000620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
new file mode 100644
index 0000000000000..e172029a0c4de
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
@@ -0,0 +1,72 @@
+/*
+ * Device Tree common file for gpio-fan on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpio-fan,speed-map =
+			<0		3
+			1500	2
+			3250	1
+			5000	0>;
+	};
+};
+
+&pinctrl {
+	pmx_fan_low: pmx-fan-low {
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi
new file mode 100644
index 0000000000000..c2d87ba6190a3
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi
@@ -0,0 +1,105 @@
+/*
+ * Device Tree common file for gpio-{keys,leds} on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_switch>;
+		pinctrl-names = "default";
+
+		power-on-switch {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+		};
+
+		power-auto-switch {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info>;
+		pinctrl-names = "default";
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			default-state = "keep";
+		};
+
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+		};
+	};
+};
+
+&pinctrl {
+	pmx_power_switch: pmx-power-switch {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_power: pmx-leds {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/orion5x-kuroboxpro.dts b/arch/arm/boot/dts/marvell/orion5x-kuroboxpro.dts
new file mode 100644
index 0000000000000..e28b568e741a3
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x-kuroboxpro.dts
@@ -0,0 +1,127 @@
+/*
+ * Device Tree file for Buffalo/Revogear Kurobox Pro
+ *
+ * Copyright (C) 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c
+ * Copyright (C) Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo/Revogear Kurobox Pro";
+	compatible = "buffalo,kurobox-pro", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+				 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+				 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>,
+				 <MBUS_ID(0x01, 0x1e) 0 0xfc000000 0x1000000>;
+	};
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+};
+
+&pinctrl {
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+};
+
+&devbus_cs0 {
+	status = "okay";
+	compatible = "marvell,orion-nand";
+	reg = <MBUS_ID(0x01, 0x1e) 0 0x400>;
+	cle = <0>;
+	ale = <1>;
+	bank-width = <1>;
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uImage@0 { /* 4 MB */
+			reg = <0 0x400000>;
+			read-only;
+		};
+
+		rootfs@400000 { /* 64 MB */
+			reg = <0x400000 0x4000000>;
+			read-only;
+		};
+
+		extra@4400000 { /* 188 MB */
+			reg = <0x4400000 0xBC00000>;
+			read-only;
+		};
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
+&sata {
+	nr-ports = <2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
new file mode 100644
index 0000000000000..03471d30bfd95
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "LaCie d2 Network";
+	compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		front_button {
+			label = "Front Push Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rocker_sw_on {
+			label = "Power rocker switch (on|auto)";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rocker_sw_off {
+			label = "Power rocker switch (auto|off)";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata1_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+                #address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full512Kb";
+			reg = <0 0x80000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372b";
+		reg = <0x32>;
+	};
+
+	fan@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+
+		/* Not enough HW info */
+		status = "disabled";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;
+	pinctrl-names = "default";
+
+	pmx_board_id: pmx-board-id {
+		marvell,pins = "mpp0", "mpp1", "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp8", "mpp9", "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_fail: pmx-fan-fail {
+		marvell,pins = "mpp5";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP6: Red front LED
+	 * MPP16: Blue front LED blink control
+	 */
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp6", "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_led_active: pmx-sata0-led-active {
+		marvell,pins = "mpp14";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata0_power: pmx-sata0-power {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_led_active: pmx-sata1-led-active {
+		marvell,pins = "mpp15";
+		marvell,function = "sata1";
+	};
+
+	pmx_sata1_power: pmx-sata1-power {
+		marvell,pins = "mpp12";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * Non MPP GPIOs:
+	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+	 *  GPIO 23: Blue front LED off
+	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+	 */
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0_led_active
+		     &pmx_sata1_led_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
new file mode 100644
index 0000000000000..f17e25ac98ddb
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+
+/*
+ * TODO: add Orion USB device port init when kernel.org support is added.
+ * TODO: add flash write support: see below.
+ * TODO: add power-off support.
+ * TODO: add I2C EEPROM support.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "LaCie Ethernet Disk mini V2";
+	compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_power_button>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "Power-on Switch";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_power_led>;
+		pinctrl-names = "default";
+
+		led@1 {
+			label = "power:blue";
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full512Kb";
+			reg = <0 0x80000>;
+			read-only;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>;
+	pinctrl-names = "default";
+
+	pmx_power_button: pmx-power-button {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led: pmx-power-led {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led_ctrl: pmx-power-led-ctrl {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
new file mode 100644
index 0000000000000..ee751995c8d0b
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
@@ -0,0 +1,171 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-CHLv3
+ *
+ * Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk>
+ * Copyright (C) 2015-2017
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include "mvebu-linkstation-gpio-simple.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo Linkstation LiveV3 (LS-CHL)";
+	compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	gpio_keys {
+		func {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info &pmx_led_func>;
+		blue-power-led {
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		red-alarm-led {
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		amber-info-led {
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		func {
+			label = "lschl:func:blue:top";
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		gpios = <&gpio0 14 GPIO_ACTIVE_LOW
+			 &gpio0 16 GPIO_ACTIVE_LOW>;
+
+		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_switch: pmx-power-switch {
+		marvell,pins = "mpp8", "mpp10", "mpp15";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_low: pmx-fan-low {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_func: pmx-leds {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+
+	pmx_sw_init: pmx-sw-init {
+		marvell,pins = "mpp7";
+		marvell,function = "gpio";
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
diff --git a/arch/arm/boot/dts/marvell/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lsgl.dts
new file mode 100644
index 0000000000000..9f6fedd391705
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lsgl.dts
@@ -0,0 +1,91 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-GL
+ *       (also known as Buffalo Linkstation Pro/Live)
+ *
+ * Copyright (C) 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c
+ * Copyright (C) Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo Linkstation Pro/Live";
+	compatible = "buffalo,lsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+};
+
+&pinctrl {
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
+&sata {
+	nr-ports = <2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lswtgl.dts
new file mode 100644
index 0000000000000..7f77ce8cc1fc6
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lswtgl.dts
@@ -0,0 +1,151 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WTGL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include "mvebu-linkstation-gpio-simple.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo Linkstation LS-WTGL";
+	compatible = "buffalo,lswtgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory { /* 64 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	gpio_keys {
+		power-on-switch {
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		blue-power-led {
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		red-alarm-led {
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		amber-info-led {
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		gpios = <&gpio0 14 GPIO_ACTIVE_LOW
+			 &gpio0 17 GPIO_ACTIVE_LOW>;
+
+		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_switch: pmx-power-switch {
+		marvell,pins = "mpp8", "mpp10";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_low: pmx-fan-low {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
+&sata {
+	nr-ports = <2>;
+};
diff --git a/arch/arm/boot/dts/marvell/orion5x-linkstation.dtsi b/arch/arm/boot/dts/marvell/orion5x-linkstation.dtsi
new file mode 100644
index 0000000000000..b6c9b85951ea6
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation.dtsi
@@ -0,0 +1,180 @@
+/*
+ * Device Tree common file for orion5x based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+				 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+				 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		hdd_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&pinctrl {
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,function = "gpio";
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "jedec-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			header@0 {
+				reg = <0 0x30000>;
+				read-only;
+			};
+
+			uboot@30000 {
+				reg = <0x30000 0xF000>;
+				read-only;
+			};
+
+			uboot_env@3F000 {
+				reg = <0x3F000 0x1000>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+	};
+};
+
+&wdt {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <1>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
new file mode 100644
index 0000000000000..2fbc17d6dfa4c
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
@@ -0,0 +1,277 @@
+/*
+ * Copyright (C) 2015 Benjamin Cama <benoar@dolka.fr>
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Based on the board file arch/arm/mach-orion5x/lsmini-setup.c,
+ * Copyright (C) 2008 Alexey Kopytko <alexey@kopytko.ru>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Buffalo Linkstation Mini (LS-WSGL)";
+	compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		func {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "Power-on Switch";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+
+		autopower {
+			label = "Power-auto Switch";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_alarm &pmx_led_info &pmx_led_func
+			     &pmx_led_power>;
+		pinctrl-names = "default";
+
+		alarm {
+			label = "lswsgl:alarm:red";
+			gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		info {
+			label = "lswsgl:info:amber";
+			gpio = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		func {
+			label = "lswsgl:func:blue:top";
+			gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "lswsgl:power:blue:bottom";
+			gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power &pmx_usb_power>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata1_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full256Kb";
+			reg = <0 0x40000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+	};
+};
+
+&pinctrl {
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp15", "mpp17", "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_func: pmx-leds {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_power: pmx-sata0-power {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_power: pmx-sata1-power {
+		marvell,pins = "mpp19";
+		marvell,function = "gpio";
+	};
+
+	pmx_usb_power: pmx-usb-power {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
new file mode 100644
index 0000000000000..d57859998350d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Maxtor Shared Storage II";
+	compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+                #address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@68 {
+		compatible = "st,m41t81";
+		reg = <0x68>;
+		pinctrl-0 = <&pmx_rtc>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_leds &pmx_misc>;
+	pinctrl-names = "default";
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp11", "mpp12";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP0: Power LED
+	 * MPP1: Error LED
+	 */
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp0", "mpp1";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP4: HDD ind. (Single/Dual)
+	 * MPP5: HD0 5V control
+	 * MPP6: HD0 12V control
+	 * MPP7: HD1 5V control
+	 * MPP8: HD1 12V control
+	 */
+	pmx_misc: pmx-misc {
+		marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_led_active: pmx-sata0-led-active {
+		marvell,pins = "mpp14";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata1_led_active: pmx-sata1-led-active {
+		marvell,pins = "mpp15";
+		marvell,function = "sata1";
+	};
+
+	/*
+	 * Non MPP GPIOs:
+	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+	 *  GPIO 23: Blue front LED off
+	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+	 */
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0_led_active
+		     &pmx_sata1_led_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/orion5x-mv88f5181.dtsi b/arch/arm/boot/dts/marvell/orion5x-mv88f5181.dtsi
new file mode 100644
index 0000000000000..819f9efb7058d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x-mv88f5181.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
+
+#include "orion5x.dtsi"
+
+/ {
+	compatible = "marvell,orion5x-88f5181", "marvell,orion5x";
+
+	soc {
+		compatible = "marvell,orion5x-88f5181-mbus", "simple-bus";
+
+		internal-regs {
+			pinctrl: pinctrl@10000 {
+				compatible = "marvell,88f5181-pinctrl";
+				reg = <0x10000 0x8>, <0x10050 0x4>;
+			};
+
+			core_clk: core-clocks@10030 {
+				compatible = "marvell,mv88f5181-core-clock";
+				reg = <0x10010 0x4>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x1500 0x20>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmx_ge: pmx-ge {
+		marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11",
+			       "mpp12", "mpp13", "mpp14", "mpp15",
+			       "mpp16", "mpp17", "mpp18", "mpp19";
+		marvell,function = "ge";
+	};
+};
+
+&eth {
+	pinctrl-0 = <&pmx_ge>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/marvell/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/marvell/orion5x-mv88f5182.dtsi
new file mode 100644
index 0000000000000..86b87fb26dc9a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x-mv88f5182.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+
+#include "orion5x.dtsi"
+
+/ {
+	compatible = "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	soc {
+		compatible = "marvell,orion5x-88f5182-mbus", "simple-bus";
+
+		internal-regs {
+			pinctrl: pinctrl@10000 {
+				compatible = "marvell,88f5182-pinctrl";
+				reg = <0x10000 0x8>, <0x10050 0x4>;
+
+				pmx_sata0: pmx-sata0 {
+					marvell,pins = "mpp12", "mpp14";
+					marvell,function = "sata0";
+				};
+
+				pmx_sata1: pmx-sata1 {
+					marvell,pins = "mpp13", "mpp15";
+					marvell,function = "sata1";
+				};
+			};
+
+			core_clk: core-clocks@10030 {
+				compatible = "marvell,mv88f5182-core-clock";
+				reg = <0x10010 0x4>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x1500 0x20>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts
new file mode 100644
index 0000000000000..fb203e7d37f5e
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "orion5x-mv88f5181.dtsi"
+
+/ {
+	model = "Netgear WNR854-t";
+	compatible = "netgear,wnr854t", "marvell,orion5x-88f5181",
+		     "marvell,orion5x";
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>; /* 32 MB */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_reset_button>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>;
+		pinctrl-names = "default";
+
+		led@0 {
+			label = "wnr854t:green:power";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led@1 {
+			label = "wnr854t:blink:power";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led@2 {
+			label = "wnr854t:green:wan";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "rootfs";
+				reg = <0x100000 0x660000>;
+			};
+
+			partition@760000 {
+				label = "uboot_env";
+				reg = <0x760000 0x20000>;
+			};
+
+			partition@780000 {
+				label = "uboot";
+				reg = <0x780000 0x80000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch: switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan3";
+				phy-handle = <&lan3phy>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy-handle = <&lan4phy>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "wan";
+				phy-handle = <&wanphy>;
+			};
+
+			port@3 {
+				reg = <3>;
+				ethernet = <&ethport>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan1";
+				phy-handle = <&lan1phy>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "lan2";
+				phy-handle = <&lan2phy>;
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan3phy: ethernet-phy@0 {
+				/* Marvell 88E1121R (port 1) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan4phy: ethernet-phy@1 {
+				/* Marvell 88E1121R (port 2) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			wanphy: ethernet-phy@2 {
+				/* Marvell 88E1121R (port 1) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <2>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan1phy: ethernet-phy@5 {
+				/* Marvell 88E1112 */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <5>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan2phy: ethernet-phy@7 {
+				/* Marvell 88E1112 */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <7>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		/* Hardwired to DSA switch */
+		speed = <1000>;
+		duplex = <1>;
+		phy-mode = "rgmii";
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_pci_gpios>;
+	pinctrl-names = "default";
+
+	pmx_power_led: pmx-power-led {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_reset_button: pmx-reset-button {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led_blink: pmx-power-led-blink {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_wan_led: pmx-wan-led {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_pci_gpios: pmx-pci-gpios {
+		marvell,pins = "mpp4";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	/* Pin 1: Tx, Pin 7: Rx, Pin 8: Gnd */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
new file mode 100644
index 0000000000000..fd78aa02a3c5b
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Marvell Reference Design 88F5182 NAS";
+	compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+		         <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
+			 <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_debug_led>;
+		pinctrl-names = "default";
+
+		led@0 {
+			label = "rd88f5182:cpu";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+	};
+};
+
+&devbus_cs1 {
+	status = "okay";
+
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x1000000>;
+		bank-width = <1>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@68 {
+		pinctrl-0 = <&pmx_rtc>;
+		pinctrl-names = "default";
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
+		&pmx_pci_gpios>;
+	pinctrl-names = "default";
+
+	/*
+	 * MPP[20] PCI Clock to MV88F5182
+	 * MPP[21] PCI Clock to mini PCI CON11
+	 * MPP[22] USB 0 over current indication
+	 * MPP[23] USB 1 over current indication
+	 * MPP[24] USB 1 over current enable
+	 * MPP[25] USB 0 over current enable
+	 */
+
+	pmx_debug_led: pmx-debug_led {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_reset_switch: pmx-reset-switch {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_misc_gpios: pmx-misc-gpios {
+		marvell,pins = "mpp4", "mpp5";
+		marvell,function = "gpio";
+	};
+
+	pmx_pci_gpios: pmx-pci-gpios {
+		marvell,pins = "mpp6", "mpp7";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/orion5x.dtsi b/arch/arm/boot/dts/marvell/orion5x.dtsi
new file mode 100644
index 0000000000000..2d41f5c166ee7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/orion5x.dtsi
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Marvell Orion5x SoC";
+	compatible = "marvell,orion5x";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		gpio0 = &gpio0;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+
+		devbus_bootcs: devbus-bootcs {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs0: devbus-cs0 {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs1: devbus-cs1 {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs2: devbus-cs2 {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			gpio0: gpio@10100 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0x10100 0x40>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <6>, <7>, <8>, <9>;
+			};
+
+			spi: spi@10600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				reg = <0x10600 0x28>;
+				status = "disabled";
+			};
+
+			i2c: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <5>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <3>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <4>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			bridge_intc: bridge-interrupt-ctrl@20110 {
+				compatible = "marvell,orion-bridge-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20110 0x8>;
+				interrupts = <0>;
+				marvell,#interrupts = <4>;
+			};
+
+			intc: interrupt-controller@20200 {
+				compatible = "marvell,orion-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20200 0x08>;
+			};
+
+			timer: timer@20300 {
+				compatible = "marvell,orion-timer";
+				reg = <0x20300 0x20>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <1>, <2>;
+				clocks = <&core_clk 0>;
+			};
+
+			wdt: wdt@20300 {
+				compatible = "marvell,orion-wdt";
+				reg = <0x20300 0x28>, <0x20108 0x4>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <3>;
+				clocks = <&core_clk 0>;
+				status = "okay";
+			};
+
+			ehci0: ehci@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x1000>;
+				interrupts = <17>;
+				status = "disabled";
+			};
+
+			xor: dma-controller@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				status = "okay";
+
+				xor00 {
+				      interrupts = <30>;
+				      dmacap,memcpy;
+				      dmacap,xor;
+				};
+				xor01 {
+				      interrupts = <31>;
+				      dmacap,memcpy;
+				      dmacap,xor;
+				      dmacap,memset;
+				};
+			};
+
+			eth: ethernet-controller@72000 {
+				compatible = "marvell,orion-eth";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72000 0x4000>;
+				marvell,tx-checksum-limit = <1600>;
+				status = "disabled";
+
+				ethport: ethernet-port@0 {
+					compatible = "marvell,orion-eth-port";
+					reg = <0>;
+					interrupts = <21>;
+					/* overwrite MAC address in bootloader */
+					local-mac-address = [00 00 00 00 00 00];
+					/* set phy-handle property in board file */
+				};
+			};
+
+			mdio: mdio-bus@72004 {
+				compatible = "marvell,orion-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72004 0x84>;
+				interrupts = <22>;
+				status = "disabled";
+
+				/* add phy nodes in board file */
+			};
+
+			sata: sata@80000 {
+				compatible = "marvell,orion-sata";
+				reg = <0x80000 0x5000>;
+				interrupts = <29>;
+				status = "disabled";
+			};
+
+			cesa: crypto@90000 {
+				compatible = "marvell,orion-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <28>;
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x800>;
+				status = "okay";
+			};
+
+			ehci1: ehci@a0000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0xa0000 0x1000>;
+				interrupts = <12>;
+				status = "disabled";
+			};
+		};
+
+		crypto_sram: sa-sram {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x00) 0x0 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/pxa168-aspenite.dts b/arch/arm/boot/dts/marvell/pxa168-aspenite.dts
new file mode 100644
index 0000000000000..8bade6bf395b3
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/pxa168-aspenite.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+/dts-v1/;
+#include "pxa168.dtsi"
+
+/ {
+	model = "Marvell PXA168 Aspenite Development Board";
+	compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x04000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/pxa168.dtsi b/arch/arm/boot/dts/marvell/pxa168.dtsi
new file mode 100644
index 0000000000000..16212b912b94e
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/pxa168.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <dt-bindings/clock/marvell,pxa168.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+				clocks = <&soc_clocks PXA168_CLK_TIMER>;
+				resets = <&soc_clocks PXA168_CLK_TIMER>;
+			};
+
+			uart1: serial@d4017000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4017000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <27>;
+				clocks = <&soc_clocks PXA168_CLK_UART0>;
+				resets = <&soc_clocks PXA168_CLK_UART0>;
+				status = "disabled";
+			};
+
+			uart2: serial@d4018000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4018000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <28>;
+				clocks = <&soc_clocks PXA168_CLK_UART1>;
+				resets = <&soc_clocks PXA168_CLK_UART1>;
+				status = "disabled";
+			};
+
+			uart3: serial@d4026000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4026000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <29>;
+				clocks = <&soc_clocks PXA168_CLK_UART2>;
+				resets = <&soc_clocks PXA168_CLK_UART2>;
+				status = "disabled";
+			};
+
+			gpio@d4019000 {
+				compatible = "marvell,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				clocks = <&soc_clocks PXA168_CLK_GPIO>;
+				resets = <&soc_clocks PXA168_CLK_GPIO>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				clocks = <&soc_clocks PXA168_CLK_TWSI0>;
+				resets = <&soc_clocks PXA168_CLK_TWSI0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4025000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xd4025000 0x1000>;
+				interrupts = <58>;
+				clocks = <&soc_clocks PXA168_CLK_TWSI1>;
+				resets = <&soc_clocks PXA168_CLK_TWSI1>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <5>, <6>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				clocks = <&soc_clocks PXA168_CLK_RTC>;
+				resets = <&soc_clocks PXA168_CLK_RTC>;
+				status = "disabled";
+			};
+		};
+
+		soc_clocks: clocks{
+			compatible = "marvell,pxa168-clock";
+			reg = <0xd4050000 0x1000>,
+			      <0xd4282800 0x400>,
+			      <0xd4015000 0x1000>;
+			reg-names = "mpmu", "apmu", "apbc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/pxa910-dkb.dts b/arch/arm/boot/dts/marvell/pxa910-dkb.dts
new file mode 100644
index 0000000000000..ce76158867c7f
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/pxa910-dkb.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+/dts-v1/;
+#include "pxa910.dtsi"
+
+/ {
+	model = "Marvell PXA910 DKB Development Board";
+	compatible = "mrvl,pxa910-dkb", "mrvl,pxa910";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x10000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+
+	pmic: 88pm860x@34 {
+		compatible = "marvell,88pm860x";
+		reg = <0x34>;
+		interrupts = <4>;
+		interrupt-parent = <&intc>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		marvell,88pm860x-irq-read-clr;
+		marvell,88pm860x-slave-addr = <0x11>;
+
+		regulators {
+			BUCK1 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			BUCK2 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			BUCK3 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			LDO5 {
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO10 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO12 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			LDO13 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			LDO14 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+		rtc {
+			marvell,88pm860x-vrtc = <1>;
+		};
+		touch {
+			marvell,88pm860x-gpadc-prebias = <1>;
+			marvell,88pm860x-gpadc-slot-cycle = <1>;
+			marvell,88pm860x-tsi-prebias = <6>;
+			marvell,88pm860x-pen-prebias = <16>;
+			marvell,88pm860x-pen-prechg = <2>;
+			marvell,88pm860x-resistor-X = <300>;
+		};
+		backlights {
+			backlight-0 {
+				marvell,88pm860x-iset = <4>;
+				marvell,88pm860x-pwm = <3>;
+			};
+			backlight-2 {
+			};
+		};
+		leds {
+			led0-red {
+				marvell,88pm860x-iset = <12>;
+			};
+			led0-green {
+				marvell,88pm860x-iset = <12>;
+			};
+			led0-blue {
+				marvell,88pm860x-iset = <12>;
+			};
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/pxa910.dtsi b/arch/arm/boot/dts/marvell/pxa910.dtsi
new file mode 100644
index 0000000000000..352a393578103
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/pxa910.dtsi
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <dt-bindings/clock/marvell,pxa910.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		L2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0x3>;
+		};
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
+			timer1: timer@d4016000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4016000 0x100>;
+				interrupts = <29>;
+				status = "disabled";
+			};
+
+			uart1: serial@d4017000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4017000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <27>;
+				clocks = <&soc_clocks PXA910_CLK_UART0>;
+				resets = <&soc_clocks PXA910_CLK_UART0>;
+				status = "disabled";
+			};
+
+			uart2: serial@d4018000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4018000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <28>;
+				clocks = <&soc_clocks PXA910_CLK_UART1>;
+				resets = <&soc_clocks PXA910_CLK_UART1>;
+				status = "disabled";
+			};
+
+			uart3: serial@d4036000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4036000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <59>;
+				clocks = <&soc_clocks PXA910_CLK_UART2>;
+				resets = <&soc_clocks PXA910_CLK_UART2>;
+				status = "disabled";
+			};
+
+			gpio@d4019000 {
+				compatible = "marvell,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				interrupt-names = "gpio_mux";
+				clocks = <&soc_clocks PXA910_CLK_GPIO>;
+				resets = <&soc_clocks PXA910_CLK_GPIO>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				clocks = <&soc_clocks PXA910_CLK_TWSI0>;
+				resets = <&soc_clocks PXA910_CLK_TWSI0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4037000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xd4037000 0x1000>;
+				interrupts = <54>;
+				clocks = <&soc_clocks PXA910_CLK_TWSI1>;
+				resets = <&soc_clocks PXA910_CLK_TWSI1>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <5>, <6>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				clocks = <&soc_clocks PXA910_CLK_RTC>;
+				resets = <&soc_clocks PXA910_CLK_RTC>;
+				status = "disabled";
+			};
+		};
+
+		soc_clocks: clocks{
+			compatible = "marvell,pxa910-clock";
+			reg = <0xd4050000 0x1000>,
+			      <0xd4282800 0x400>,
+			      <0xd4015000 0x1000>,
+			      <0xd403b000 0x1000>;
+			reg-names = "mpmu", "apmu", "apbc", "apbcp";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi
deleted file mode 100644
index 5bf831b072d6a..0000000000000
--- a/arch/arm/boot/dts/mba6ulx.dtsi
+++ /dev/null
@@ -1,569 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright 2018-2022 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/ {
-	model = "TQ-Systems MBA6ULx Baseboard";
-
-	aliases {
-		mmc0 = &usdhc2;
-		mmc1 = &usdhc1;
-		rtc0 = &rtc0;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		power-supply = <&reg_mba6ul_3v3>;
-		enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-	};
-
-	beeper: beeper {
-		compatible = "gpio-beeper";
-		gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio_buttons: gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_buttons>;
-
-		button1 {
-			label = "s14";
-			linux,code = <KEY_1>;
-			gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>;
-		};
-
-		button2 {
-			label = "s6";
-			linux,code = <KEY_2>;
-			gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>;
-		};
-
-		button3 {
-			label = "s7";
-			linux,code = <KEY_3>;
-			gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>;
-		};
-
-		power-button {
-			label = "POWER";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led1 {
-			label = "led1";
-			gpios = <&expander_out1 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&expander_out1 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_lcd_pwr: regulator-lcd-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-pwr";
-		gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		status = "disabled";
-	};
-
-	reg_mba6ul_3v3: regulator-mba6ul-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "supply-mba6ul-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_mba6ul_5v0: regulator-mba6ul-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "supply-mba6ul-5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_mpcie: regulator-mpcie-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "mpcie-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		startup-delay-us = <500000>;
-		vin-supply = <&reg_mba6ul_3v3>;
-	};
-
-	reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 {
-		compatible = "regulator-fixed";
-		gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-name = "otg2-vbus-supply-5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_mpcie>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		linux,cma {
-			compatible = "shared-dma-pool";
-			reusable;
-			size = <0x6000000>;
-			linux,cma-default;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "imx-audio-tlv320aic32x4";
-		ssi-controller = <&sai1>;
-		audio-codec = <&tlv320aic32x4>;
-		audio-asrc = <&asrc>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_mba6ul_3v3>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_mba6ul_3v3>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <768000000>;
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	num-cs = <1>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	phy-supply = <&reg_mba6ul_3v3>;
-	phy-reset-gpios = <&expander_out1 1 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <25>;
-	phy-reset-post-delay = <1>;
-	status = "okay";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_mdc>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	phy-supply = <&reg_mba6ul_3v3>;
-	phy-reset-gpios = <&expander_out1 2 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <25>;
-	phy-reset-post-delay = <1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			reg = <0>;
-			max-speed = <100>;
-		};
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
-			reg = <1>;
-			max-speed = <100>;
-		};
-	};
-};
-
-&i2c4 {
-	tlv320aic32x4: audio-codec@18 {
-		compatible = "ti,tlv320aic32x4";
-		reg = <0x18>;
-		clocks = <&clks IMX6UL_CLK_SAI1>;
-		clock-names = "mclk";
-		ldoin-supply = <&reg_mba6ul_3v3>;
-		iov-supply = <&reg_mba6ul_3v3>;
-	};
-
-	jc42: temperature-sensor@19 {
-		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
-		reg = <0x19>;
-	};
-
-	expander_out0: gpio-expander@20 {
-		compatible = "nxp,pca9554";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	expander_in0: gpio-expander@21 {
-		compatible = "nxp,pca9554";
-		reg = <0x21>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_expander_in0>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		enet1_int-hog {
-			gpio-hog;
-			gpios = <6 0>;
-			input;
-		};
-
-		enet2_int-hog {
-			gpio-hog;
-			gpios = <7 0>;
-			input;
-		};
-	};
-
-	expander_out1: gpio-expander@22 {
-		compatible = "nxp,pca9554";
-		reg = <0x22>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	analog_touch: touchscreen@41 {
-		compatible = "st,stmpe811";
-		reg = <0x41>;
-		interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-parent = <&gpio4>;
-		interrupt-controller;
-		status = "disabled";
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			st,adc-freq = <1>;      /* 3.25 MHz ADC clock speed */
-			st,ave-ctrl = <3>;      /* 8 sample average control */
-			st,fraction-z = <7>;    /* 7 length fractional part in z */
-			/*
-			 * 50 mA typical 80 mA max touchscreen drivers
-			 * current limit value
-			 */
-			st,i-drive = <1>;
-			st,mod-12b = <1>;       /* 12-bit ADC */
-			st,ref-sel = <0>;       /* internal ADC reference */
-			st,sample-time = <4>;   /* ADC converstion time: 80 clocks */
-			st,settling = <3>;      /* 1 ms panel driver settling time */
-			st,touch-det-delay = <5>; /* 5 ms touch detect interrupt delay */
-		};
-	};
-
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97b: eeprom@51 {
-		compatible = "nxp,se97b", "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>,
-			  <&clks IMX6UL_CLK_SAI1>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <0>, <24000000>;
-	fsl,sai-mclk-direction-output;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	/* for DTE mode, add below change */
-	/* fsl,dte-mode; */
-	/* pinctrl-0 = <&pinctrl_uart6dte>; */
-	uart-has-rtscts;
-	linux,rs485-enabled-at-boot-time;
-	rs485-rts-active-low;
-	rs485-rx-during-tx;
-	status = "okay";
-};
-
-/* otg-port */
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1>;
-	power-active-high;
-	over-current-active-low;
-	/* we implement only dual role but not a fully featured OTG */
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-/* 7-port usb hub */
-/* id, pwr, oc pins not connected */
-&usbotg2 {
-	disable-over-current;
-	vbus-supply = <&reg_otg2vbus_5v0>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_mba6ul_3v3>;
-	vqmmc-supply = <&reg_vccsd>;
-	no-1-8-v;
-	no-mmc;
-	no-sdio;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_buttons: buttonsgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x100b0
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK	0x1b020
-			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO	0x1b020
-			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI	0x1b020
-			MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0	0x1b020
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b0a8
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0a0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0a0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b0a8
-		>;
-	};
-
-	pinctrl_enet2_mdc: enet2mdcgrp {
-		fsl,pins = <
-			/* mdio */
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-		>;
-	};
-
-	pinctrl_expander_in0: expanderin0grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x1b0b1
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
-			MX6UL_PAD_GPIO1_IO09__PWM2_OUT		0x00003050
-		>;
-	};
-
-	pinctrl_sai1: sai1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK	0x1b0b1
-			MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC	0x1b0b1
-			MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA	0x1f0b8
-			MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA	0x110b0
-			MX6UL_PAD_CSI_DATA01__SAI1_MCLK		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
-			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
-			MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS	0x1b0b1
-			MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart6dte: uart6dte {
-		fsl,pins = <
-			MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX	0x1b0b1
-			MX6UL_PAD_CSI_MCLK__UART6_DTE_RX	0x1b0b1
-			MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS	0x1b0b1
-			MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_usb_otg1: usbotg1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x00017059
-			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x0001b0b0
-			MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR	0x0001b099
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x00017059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x00017059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x00017059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x00017059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x00017059
-			/* WP */
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
-			/* CD */
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x000170b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x000170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x000170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x000170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x000170b9
-			/* WP */
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
-			/* CD */
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x000170f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x000170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x000170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x000170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x000170f9
-			/* WP */
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
-			/* CD */
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
-		>;
-	};
-
-	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B	0x0001b099
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/mediatek/Makefile b/arch/arm/boot/dts/mediatek/Makefile
new file mode 100644
index 0000000000000..1957947cb41ce
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MEDIATEK) += \
+	mt2701-evb.dtb \
+	mt6580-evbp1.dtb \
+	mt6582-prestigio-pmt5008-3g.dtb \
+	mt6589-aquaris5.dtb \
+	mt6589-fairphone-fp1.dtb \
+	mt6592-evb.dtb \
+	mt7623a-rfb-emmc.dtb \
+	mt7623a-rfb-nand.dtb \
+	mt7623n-rfb-emmc.dtb \
+	mt7623n-bananapi-bpi-r2.dtb \
+	mt7629-rfb.dtb \
+	mt8127-moose.dtb \
+	mt8135-evbp1.dtb
diff --git a/arch/arm/boot/dts/mediatek/mt2701-evb.dts b/arch/arm/boot/dts/mediatek/mt2701-evb.dts
new file mode 100644
index 0000000000000..d1535f385f361
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt2701-evb.dts
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Erin Lo <erin.lo@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "mt2701.dtsi"
+
+/ {
+	model = "MediaTek MT2701 evaluation board";
+	compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	sound:sound {
+		compatible = "mediatek,mt2701-cs42448-machine";
+		mediatek,platform = <&afe>;
+		/* CS42448 Machine name */
+		audio-routing =
+		"Line Out Jack", "AOUT1L",
+		"Line Out Jack", "AOUT1R",
+		"Line Out Jack", "AOUT2L",
+		"Line Out Jack", "AOUT2R",
+		"Line Out Jack", "AOUT3L",
+		"Line Out Jack", "AOUT3R",
+		"Line Out Jack", "AOUT4L",
+		"Line Out Jack", "AOUT4R",
+		"AIN1L", "AMIC",
+		"AIN1R", "AMIC",
+		"AIN2L", "Tuner In",
+		"AIN2R", "Tuner In",
+		"AIN3L", "Satellite Tuner In",
+		"AIN3R", "Satellite Tuner In",
+		"AIN3L", "AUX In",
+		"AIN3R", "AUX In";
+		mediatek,audio-codec = <&cs42448>;
+		mediatek,audio-codec-bt-mrg = <&bt_sco_codec>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&aud_pins_default>;
+		i2s1-in-sel-gpio1 = <&pio 53 0>;
+		i2s1-in-sel-gpio2 = <&pio 54 0>;
+		status = "okay";
+	};
+
+	bt_sco_codec:bt_sco_codec {
+		compatible = "linux,bt-sco";
+	};
+
+	backlight_lcd: backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&bls 0 100000>;
+		brightness-levels = <
+			  0  16  32  48  64  80  96 112
+			128 144 160 176 192 208 224 240
+			255
+		>;
+		default-brightness-level = <9>;
+	};
+
+	usb_vbus: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 45 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&bls {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_bls_gpio>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+	cs42448: cs42448@48 {
+		compatible = "cirrus,cs42448";
+		reg = <0x48>;
+		clocks = <&topckgen CLK_TOP_AUD_I2S1_MCLK>;
+		clock-names = "mclk";
+	};
+};
+
+&pio {
+	i2c0_pins_a: i2c0@0 {
+		pins1 {
+			pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>,
+				 <MT2701_PIN_76_SCL0__FUNC_SCL0>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_a: i2c1@0 {
+		pins1 {
+			pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>,
+				 <MT2701_PIN_58_SCL1__FUNC_SCL1>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_a: i2c2@0 {
+		pins1 {
+			pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>,
+				 <MT2701_PIN_78_SCL2__FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
+	pwm_bls_gpio: pwm_bls_gpio {
+		pins_cmd_dat {
+			pinmux = <MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM>;
+		};
+	};
+
+	spi_pins_a: spi0@0 {
+		pins_spi {
+			pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>,
+				 <MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK>,
+				 <MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI>,
+				 <MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO>;
+			bias-disable;
+		};
+	};
+
+	aud_pins_default: audiodefault {
+		pins_cmd_dat {
+			pinmux = <MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA>,
+				 <MT2701_PIN_72_I2S0_DATA_IN__FUNC_I2S0_DATA_IN>,
+				 <MT2701_PIN_73_I2S0_LRCK__FUNC_I2S0_LRCK>,
+				 <MT2701_PIN_74_I2S0_BCK__FUNC_I2S0_BCK>,
+				 <MT2701_PIN_126_I2S0_MCLK__FUNC_I2S0_MCLK>,
+				 <MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA>,
+				 <MT2701_PIN_34_I2S1_DATA_IN__FUNC_I2S1_DATA_IN>,
+				 <MT2701_PIN_35_I2S1_BCK__FUNC_I2S1_BCK>,
+				 <MT2701_PIN_36_I2S1_LRCK__FUNC_I2S1_LRCK>,
+				 <MT2701_PIN_37_I2S1_MCLK__FUNC_I2S1_MCLK>,
+				 <MT2701_PIN_203_PWM0__FUNC_I2S2_DATA>,
+				 <MT2701_PIN_204_PWM1__FUNC_I2S3_DATA>,
+				 <MT2701_PIN_53_SPI0_CSN__FUNC_GPIO53>,
+				 <MT2701_PIN_54_SPI0_CK__FUNC_GPIO54>,
+				 <MT2701_PIN_18_PCM_CLK__FUNC_MRG_CLK>,
+				 <MT2701_PIN_19_PCM_SYNC__FUNC_MRG_SYNC>,
+				 <MT2701_PIN_20_PCM_RX__FUNC_MRG_TX>,
+				 <MT2701_PIN_21_PCM_TX__FUNC_MRG_RX>;
+			drive-strength = <MTK_DRIVE_12mA>;
+			bias-pull-down;
+		};
+	};
+
+	spi_pins_b: spi1@0 {
+		pins_spi {
+			pinmux = <MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS>,
+				 <MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI>,
+				 <MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO>,
+				 <MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK>;
+			bias-disable;
+		};
+	};
+
+	spi_pins_c: spi2@0 {
+		pins_spi {
+			pinmux = <MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS>,
+				 <MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI>,
+				 <MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO>,
+				 <MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK>;
+			bias-disable;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_a>;
+	status = "disabled";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_b>;
+	status = "disabled";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_c>;
+	status = "disabled";
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+	};
+};
+
+&pio {
+	nor_pins_default: nor {
+		pins1 {
+			pinmux = <MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS>,
+				 <MT2701_PIN_241_EXT_SCK__FUNC_EXT_SCK>,
+				 <MT2701_PIN_239_EXT_SDIO0__FUNC_EXT_SDIO0>,
+				 <MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1>,
+				 <MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2>,
+				 <MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3>;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+	usb-role-switch;
+	connector{
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&usb_vbus>;
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt2701-pinfunc.h b/arch/arm/boot/dts/mediatek/mt2701-pinfunc.h
new file mode 100644
index 0000000000000..136a25a0ae283
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt2701-pinfunc.h
@@ -0,0 +1,727 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Biao Huang <biao.huang@mediatek.com>
+ */
+
+#ifndef __DTS_MT2701_PINFUNC_H
+#define __DTS_MT2701_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(0) | 1)
+#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDI (MTK_PIN_NO(0) | 2)
+
+#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(1) | 1)
+#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDO (MTK_PIN_NO(1) | 2)
+
+#define MT2701_PIN_2_PWRAP_INT__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT2701_PIN_2_PWRAP_INT__FUNC_PWRAP_INT (MTK_PIN_NO(2) | 1)
+
+#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(3) | 1)
+
+#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(4) | 1)
+
+#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_PWRAP_SPICK2_I (MTK_PIN_NO(5) | 1)
+#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_ANT_SEL1 (MTK_PIN_NO(5) | 5)
+
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_PWRAP_SPICS2_B_I (MTK_PIN_NO(6) | 1)
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_ANT_SEL0 (MTK_PIN_NO(6) | 5)
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_DBG_MON_A_0 (MTK_PIN_NO(6) | 7)
+
+#define MT2701_PIN_7_SPI1_CSN__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS (MTK_PIN_NO(7) | 1)
+#define MT2701_PIN_7_SPI1_CSN__FUNC_KCOL0 (MTK_PIN_NO(7) | 4)
+#define MT2701_PIN_7_SPI1_CSN__FUNC_DBG_MON_B_12 (MTK_PIN_NO(7) | 7)
+
+#define MT2701_PIN_8_SPI1_MI__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI (MTK_PIN_NO(8) | 1)
+#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MO (MTK_PIN_NO(8) | 2)
+#define MT2701_PIN_8_SPI1_MI__FUNC_KCOL1 (MTK_PIN_NO(8) | 4)
+#define MT2701_PIN_8_SPI1_MI__FUNC_DBG_MON_B_13 (MTK_PIN_NO(8) | 7)
+
+#define MT2701_PIN_9_SPI1_MO__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO (MTK_PIN_NO(9) | 1)
+#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MI (MTK_PIN_NO(9) | 2)
+#define MT2701_PIN_9_SPI1_MO__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3)
+#define MT2701_PIN_9_SPI1_MO__FUNC_KCOL2 (MTK_PIN_NO(9) | 4)
+#define MT2701_PIN_9_SPI1_MO__FUNC_DBG_MON_B_14 (MTK_PIN_NO(9) | 7)
+
+#define MT2701_PIN_10_RTC32K_CK__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT2701_PIN_10_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(10) | 1)
+
+#define MT2701_PIN_11_WATCHDOG__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT2701_PIN_11_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(11) | 1)
+
+#define MT2701_PIN_12_SRCLKENA__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT2701_PIN_12_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(12) | 1)
+
+#define MT2701_PIN_13_SRCLKENAI__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT2701_PIN_13_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(13) | 1)
+
+#define MT2701_PIN_14_URXD2__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT2701_PIN_14_URXD2__FUNC_URXD2 (MTK_PIN_NO(14) | 1)
+#define MT2701_PIN_14_URXD2__FUNC_UTXD2 (MTK_PIN_NO(14) | 2)
+#define MT2701_PIN_14_URXD2__FUNC_SRCCLKENAI2 (MTK_PIN_NO(14) | 5)
+#define MT2701_PIN_14_URXD2__FUNC_DBG_MON_B_30 (MTK_PIN_NO(14) | 7)
+
+#define MT2701_PIN_15_UTXD2__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT2701_PIN_15_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(15) | 1)
+#define MT2701_PIN_15_UTXD2__FUNC_URXD2 (MTK_PIN_NO(15) | 2)
+#define MT2701_PIN_15_UTXD2__FUNC_DBG_MON_B_31 (MTK_PIN_NO(15) | 7)
+
+#define MT2701_PIN_18_PCM_CLK__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT2701_PIN_18_PCM_CLK__FUNC_PCM_CLK0 (MTK_PIN_NO(18) | 1)
+#define MT2701_PIN_18_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(18) | 2)
+#define MT2701_PIN_18_PCM_CLK__FUNC_MM_TEST_CK (MTK_PIN_NO(18) | 4)
+#define MT2701_PIN_18_PCM_CLK__FUNC_CONN_DSP_JCK (MTK_PIN_NO(18) | 5)
+#define MT2701_PIN_18_PCM_CLK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(18) | 6)
+#define MT2701_PIN_18_PCM_CLK__FUNC_DBG_MON_A_3 (MTK_PIN_NO(18) | 7)
+
+#define MT2701_PIN_19_PCM_SYNC__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_PCM_SYNC (MTK_PIN_NO(19) | 1)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(19) | 2)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(19) | 5)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(19) | 6)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_DBG_MON_A_5 (MTK_PIN_NO(19) | 7)
+
+#define MT2701_PIN_20_PCM_RX__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT2701_PIN_20_PCM_RX__FUNC_PCM_RX (MTK_PIN_NO(20) | 1)
+#define MT2701_PIN_20_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(20) | 2)
+#define MT2701_PIN_20_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(20) | 3)
+#define MT2701_PIN_20_PCM_RX__FUNC_PCM_TX (MTK_PIN_NO(20) | 4)
+#define MT2701_PIN_20_PCM_RX__FUNC_CONN_DSP_JDI (MTK_PIN_NO(20) | 5)
+#define MT2701_PIN_20_PCM_RX__FUNC_WCN_PCM_RX (MTK_PIN_NO(20) | 6)
+#define MT2701_PIN_20_PCM_RX__FUNC_DBG_MON_A_4 (MTK_PIN_NO(20) | 7)
+
+#define MT2701_PIN_21_PCM_TX__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT2701_PIN_21_PCM_TX__FUNC_PCM_TX (MTK_PIN_NO(21) | 1)
+#define MT2701_PIN_21_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(21) | 2)
+#define MT2701_PIN_21_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(21) | 3)
+#define MT2701_PIN_21_PCM_TX__FUNC_PCM_RX (MTK_PIN_NO(21) | 4)
+#define MT2701_PIN_21_PCM_TX__FUNC_CONN_DSP_JMS (MTK_PIN_NO(21) | 5)
+#define MT2701_PIN_21_PCM_TX__FUNC_WCN_PCM_TX (MTK_PIN_NO(21) | 6)
+#define MT2701_PIN_21_PCM_TX__FUNC_DBG_MON_A_2 (MTK_PIN_NO(21) | 7)
+
+#define MT2701_PIN_22_EINT0__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT2701_PIN_22_EINT0__FUNC_UCTS0 (MTK_PIN_NO(22) | 1)
+#define MT2701_PIN_22_EINT0__FUNC_KCOL3 (MTK_PIN_NO(22) | 3)
+#define MT2701_PIN_22_EINT0__FUNC_CONN_DSP_JDO (MTK_PIN_NO(22) | 4)
+#define MT2701_PIN_22_EINT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(22) | 5)
+#define MT2701_PIN_22_EINT0__FUNC_DBG_MON_A_30 (MTK_PIN_NO(22) | 7)
+#define MT2701_PIN_22_EINT0__FUNC_PCIE0_PERST_N (MTK_PIN_NO(22) | 10)
+
+#define MT2701_PIN_23_EINT1__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT2701_PIN_23_EINT1__FUNC_URTS0 (MTK_PIN_NO(23) | 1)
+#define MT2701_PIN_23_EINT1__FUNC_KCOL2 (MTK_PIN_NO(23) | 3)
+#define MT2701_PIN_23_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(23) | 4)
+#define MT2701_PIN_23_EINT1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(23) | 5)
+#define MT2701_PIN_23_EINT1__FUNC_DBG_MON_A_29 (MTK_PIN_NO(23) | 7)
+#define MT2701_PIN_23_EINT1__FUNC_PCIE1_PERST_N (MTK_PIN_NO(23) | 10)
+
+#define MT2701_PIN_24_EINT2__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT2701_PIN_24_EINT2__FUNC_UCTS1 (MTK_PIN_NO(24) | 1)
+#define MT2701_PIN_24_EINT2__FUNC_KCOL1 (MTK_PIN_NO(24) | 3)
+#define MT2701_PIN_24_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(24) | 4)
+#define MT2701_PIN_24_EINT2__FUNC_DBG_MON_A_28 (MTK_PIN_NO(24) | 7)
+#define MT2701_PIN_24_EINT2__FUNC_PCIE2_PERST_N (MTK_PIN_NO(24) | 10)
+
+#define MT2701_PIN_25_EINT3__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT2701_PIN_25_EINT3__FUNC_URTS1 (MTK_PIN_NO(25) | 1)
+#define MT2701_PIN_25_EINT3__FUNC_KCOL0 (MTK_PIN_NO(25) | 3)
+#define MT2701_PIN_25_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(25) | 4)
+#define MT2701_PIN_25_EINT3__FUNC_DBG_MON_A_27 (MTK_PIN_NO(25) | 7)
+
+#define MT2701_PIN_26_EINT4__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT2701_PIN_26_EINT4__FUNC_UCTS3 (MTK_PIN_NO(26) | 1)
+#define MT2701_PIN_26_EINT4__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(26) | 2)
+#define MT2701_PIN_26_EINT4__FUNC_KROW3 (MTK_PIN_NO(26) | 3)
+#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_TCK0 (MTK_PIN_NO(26) | 4)
+#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(26) | 5)
+#define MT2701_PIN_26_EINT4__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(26) | 6)
+#define MT2701_PIN_26_EINT4__FUNC_DBG_MON_A_26 (MTK_PIN_NO(26) | 7)
+
+#define MT2701_PIN_27_EINT5__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT2701_PIN_27_EINT5__FUNC_URTS3 (MTK_PIN_NO(27) | 1)
+#define MT2701_PIN_27_EINT5__FUNC_IDDIG_P1 (MTK_PIN_NO(27) | 2)
+#define MT2701_PIN_27_EINT5__FUNC_KROW2 (MTK_PIN_NO(27) | 3)
+#define MT2701_PIN_27_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(27) | 4)
+#define MT2701_PIN_27_EINT5__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(27) | 6)
+#define MT2701_PIN_27_EINT5__FUNC_DBG_MON_A_25 (MTK_PIN_NO(27) | 7)
+
+#define MT2701_PIN_28_EINT6__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT2701_PIN_28_EINT6__FUNC_DRV_VBUS (MTK_PIN_NO(28) | 1)
+#define MT2701_PIN_28_EINT6__FUNC_KROW1 (MTK_PIN_NO(28) | 3)
+#define MT2701_PIN_28_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(28) | 4)
+#define MT2701_PIN_28_EINT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(28) | 6)
+#define MT2701_PIN_28_EINT6__FUNC_DBG_MON_A_24 (MTK_PIN_NO(28) | 7)
+
+#define MT2701_PIN_29_EINT7__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT2701_PIN_29_EINT7__FUNC_IDDIG (MTK_PIN_NO(29) | 1)
+#define MT2701_PIN_29_EINT7__FUNC_MSDC1_WP (MTK_PIN_NO(29) | 2)
+#define MT2701_PIN_29_EINT7__FUNC_KROW0 (MTK_PIN_NO(29) | 3)
+#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(29) | 4)
+#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(29) | 5)
+#define MT2701_PIN_29_EINT7__FUNC_DBG_MON_A_23 (MTK_PIN_NO(29) | 7)
+#define MT2701_PIN_29_EINT7__FUNC_PCIE2_PERST_N (MTK_PIN_NO(29) | 14)
+
+#define MT2701_PIN_33_I2S1_DATA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA (MTK_PIN_NO(33) | 1)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA_BYPS (MTK_PIN_NO(33) | 2)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_PCM_TX (MTK_PIN_NO(33) | 3)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_IMG_TEST_CK (MTK_PIN_NO(33) | 4)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_G1_RXD0 (MTK_PIN_NO(33) | 5)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_WCN_PCM_TX (MTK_PIN_NO(33) | 6)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_DBG_MON_B_8 (MTK_PIN_NO(33) | 7)
+
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_I2S1_DATA_IN (MTK_PIN_NO(34) | 1)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(34) | 3)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_VDEC_TEST_CK (MTK_PIN_NO(34) | 4)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_G1_RXD1 (MTK_PIN_NO(34) | 5)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_WCN_PCM_RX (MTK_PIN_NO(34) | 6)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_DBG_MON_B_7 (MTK_PIN_NO(34) | 7)
+
+#define MT2701_PIN_35_I2S1_BCK__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_I2S1_BCK (MTK_PIN_NO(35) | 1)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(35) | 3)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_G1_RXD2 (MTK_PIN_NO(35) | 5)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(35) | 6)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_DBG_MON_B_9 (MTK_PIN_NO(35) | 7)
+
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_I2S1_LRCK (MTK_PIN_NO(36) | 1)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(36) | 3)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_G1_RXD3 (MTK_PIN_NO(36) | 5)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(36) | 6)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_DBG_MON_B_10 (MTK_PIN_NO(36) | 7)
+
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_I2S1_MCLK (MTK_PIN_NO(37) | 1)
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_G1_RXDV (MTK_PIN_NO(37) | 5)
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_DBG_MON_B_11 (MTK_PIN_NO(37) | 7)
+
+#define MT2701_PIN_39_JTMS__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT2701_PIN_39_JTMS__FUNC_JTMS (MTK_PIN_NO(39) | 1)
+#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(39) | 2)
+#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(39) | 3)
+#define MT2701_PIN_39_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(39) | 4)
+
+#define MT2701_PIN_40_JTCK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT2701_PIN_40_JTCK__FUNC_JTCK (MTK_PIN_NO(40) | 1)
+#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_TCK1 (MTK_PIN_NO(40) | 2)
+#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(40) | 3)
+#define MT2701_PIN_40_JTCK__FUNC_DFD_TCK_XI (MTK_PIN_NO(40) | 4)
+
+#define MT2701_PIN_41_JTDI__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT2701_PIN_41_JTDI__FUNC_JTDI (MTK_PIN_NO(41) | 1)
+#define MT2701_PIN_41_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(41) | 2)
+#define MT2701_PIN_41_JTDI__FUNC_DFD_TDI_XI (MTK_PIN_NO(41) | 4)
+
+#define MT2701_PIN_42_JTDO__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT2701_PIN_42_JTDO__FUNC_JTDO (MTK_PIN_NO(42) | 1)
+#define MT2701_PIN_42_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(42) | 2)
+#define MT2701_PIN_42_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(42) | 4)
+
+#define MT2701_PIN_43_NCLE__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT2701_PIN_43_NCLE__FUNC_NCLE (MTK_PIN_NO(43) | 1)
+#define MT2701_PIN_43_NCLE__FUNC_EXT_XCS2 (MTK_PIN_NO(43) | 2)
+
+#define MT2701_PIN_44_NCEB1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT2701_PIN_44_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(44) | 1)
+#define MT2701_PIN_44_NCEB1__FUNC_IDDIG (MTK_PIN_NO(44) | 2)
+
+#define MT2701_PIN_45_NCEB0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT2701_PIN_45_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(45) | 1)
+#define MT2701_PIN_45_NCEB0__FUNC_DRV_VBUS (MTK_PIN_NO(45) | 2)
+
+#define MT2701_PIN_46_IR__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT2701_PIN_46_IR__FUNC_IR (MTK_PIN_NO(46) | 1)
+
+#define MT2701_PIN_47_NREB__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT2701_PIN_47_NREB__FUNC_NREB (MTK_PIN_NO(47) | 1)
+#define MT2701_PIN_47_NREB__FUNC_IDDIG_P1 (MTK_PIN_NO(47) | 2)
+
+#define MT2701_PIN_48_NRNB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT2701_PIN_48_NRNB__FUNC_NRNB (MTK_PIN_NO(48) | 1)
+#define MT2701_PIN_48_NRNB__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(48) | 2)
+
+#define MT2701_PIN_49_I2S0_DATA__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA (MTK_PIN_NO(49) | 1)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA_BYPS (MTK_PIN_NO(49) | 2)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_PCM_TX (MTK_PIN_NO(49) | 3)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_WCN_I2S_DO (MTK_PIN_NO(49) | 6)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_DBG_MON_B_3 (MTK_PIN_NO(49) | 7)
+
+#define MT2701_PIN_53_SPI0_CSN__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS (MTK_PIN_NO(53) | 1)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_SPDIF (MTK_PIN_NO(53) | 3)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_ADC_CK (MTK_PIN_NO(53) | 4)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_PWM1 (MTK_PIN_NO(53) | 5)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_DBG_MON_A_7 (MTK_PIN_NO(53) | 7)
+
+#define MT2701_PIN_54_SPI0_CK__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK (MTK_PIN_NO(54) | 1)
+#define MT2701_PIN_54_SPI0_CK__FUNC_SPDIF_IN1 (MTK_PIN_NO(54) | 3)
+#define MT2701_PIN_54_SPI0_CK__FUNC_ADC_DAT_IN (MTK_PIN_NO(54) | 4)
+#define MT2701_PIN_54_SPI0_CK__FUNC_DBG_MON_A_10 (MTK_PIN_NO(54) | 7)
+
+#define MT2701_PIN_55_SPI0_MI__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI (MTK_PIN_NO(55) | 1)
+#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MO (MTK_PIN_NO(55) | 2)
+#define MT2701_PIN_55_SPI0_MI__FUNC_MSDC1_WP (MTK_PIN_NO(55) | 3)
+#define MT2701_PIN_55_SPI0_MI__FUNC_ADC_WS (MTK_PIN_NO(55) | 4)
+#define MT2701_PIN_55_SPI0_MI__FUNC_PWM2 (MTK_PIN_NO(55) | 5)
+#define MT2701_PIN_55_SPI0_MI__FUNC_DBG_MON_A_8 (MTK_PIN_NO(55) | 7)
+
+#define MT2701_PIN_56_SPI0_MO__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO (MTK_PIN_NO(56) | 1)
+#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MI (MTK_PIN_NO(56) | 2)
+#define MT2701_PIN_56_SPI0_MO__FUNC_SPDIF_IN0 (MTK_PIN_NO(56) | 3)
+#define MT2701_PIN_56_SPI0_MO__FUNC_DBG_MON_A_9 (MTK_PIN_NO(56) | 7)
+
+#define MT2701_PIN_57_SDA1__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT2701_PIN_57_SDA1__FUNC_SDA1 (MTK_PIN_NO(57) | 1)
+
+#define MT2701_PIN_58_SCL1__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT2701_PIN_58_SCL1__FUNC_SCL1 (MTK_PIN_NO(58) | 1)
+
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_I2S0_DATA_IN (MTK_PIN_NO(72) | 1)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(72) | 3)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PWM0 (MTK_PIN_NO(72) | 4)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DISP_PWM (MTK_PIN_NO(72) | 5)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_WCN_I2S_DI (MTK_PIN_NO(72) | 6)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DBG_MON_B_2 (MTK_PIN_NO(72) | 7)
+
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(73) | 1)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(73) | 3)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_WCN_I2S_LRCK (MTK_PIN_NO(73) | 6)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_DBG_MON_B_5 (MTK_PIN_NO(73) | 7)
+
+#define MT2701_PIN_74_I2S0_BCK__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(74) | 1)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(74) | 3)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_WCN_I2S_BCK (MTK_PIN_NO(74) | 6)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_DBG_MON_B_4 (MTK_PIN_NO(74) | 7)
+
+#define MT2701_PIN_75_SDA0__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define MT2701_PIN_75_SDA0__FUNC_SDA0 (MTK_PIN_NO(75) | 1)
+
+#define MT2701_PIN_76_SCL0__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define MT2701_PIN_76_SCL0__FUNC_SCL0 (MTK_PIN_NO(76) | 1)
+
+#define MT2701_PIN_77_SDA2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define MT2701_PIN_77_SDA2__FUNC_SDA2 (MTK_PIN_NO(77) | 1)
+
+#define MT2701_PIN_78_SCL2__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define MT2701_PIN_78_SCL2__FUNC_SCL2 (MTK_PIN_NO(78) | 1)
+
+#define MT2701_PIN_79_URXD0__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define MT2701_PIN_79_URXD0__FUNC_URXD0 (MTK_PIN_NO(79) | 1)
+#define MT2701_PIN_79_URXD0__FUNC_UTXD0 (MTK_PIN_NO(79) | 2)
+#define MT2701_PIN_79_URXD0__FUNC_ (MTK_PIN_NO(79) | 5)
+
+#define MT2701_PIN_80_UTXD0__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define MT2701_PIN_80_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(80) | 1)
+#define MT2701_PIN_80_UTXD0__FUNC_URXD0 (MTK_PIN_NO(80) | 2)
+
+#define MT2701_PIN_81_URXD1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define MT2701_PIN_81_URXD1__FUNC_URXD1 (MTK_PIN_NO(81) | 1)
+#define MT2701_PIN_81_URXD1__FUNC_UTXD1 (MTK_PIN_NO(81) | 2)
+
+#define MT2701_PIN_82_UTXD1__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define MT2701_PIN_82_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(82) | 1)
+#define MT2701_PIN_82_UTXD1__FUNC_URXD1 (MTK_PIN_NO(82) | 2)
+
+#define MT2701_PIN_83_LCM_RST__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define MT2701_PIN_83_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(83) | 1)
+#define MT2701_PIN_83_LCM_RST__FUNC_VDAC_CK_XI (MTK_PIN_NO(83) | 2)
+#define MT2701_PIN_83_LCM_RST__FUNC_DBG_MON_B_1 (MTK_PIN_NO(83) | 7)
+
+#define MT2701_PIN_84_DSI_TE__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define MT2701_PIN_84_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(84) | 1)
+#define MT2701_PIN_84_DSI_TE__FUNC_DBG_MON_B_0 (MTK_PIN_NO(84) | 7)
+
+#define MT2701_PIN_91_TDN3__FUNC_GPI91 (MTK_PIN_NO(91) | 0)
+#define MT2701_PIN_91_TDN3__FUNC_TDN3 (MTK_PIN_NO(91) | 1)
+
+#define MT2701_PIN_92_TDP3__FUNC_GPI92 (MTK_PIN_NO(92) | 0)
+#define MT2701_PIN_92_TDP3__FUNC_TDP3 (MTK_PIN_NO(92) | 1)
+
+#define MT2701_PIN_93_TDN2__FUNC_GPI93 (MTK_PIN_NO(93) | 0)
+#define MT2701_PIN_93_TDN2__FUNC_TDN2 (MTK_PIN_NO(93) | 1)
+
+#define MT2701_PIN_94_TDP2__FUNC_GPI94 (MTK_PIN_NO(94) | 0)
+#define MT2701_PIN_94_TDP2__FUNC_TDP2 (MTK_PIN_NO(94) | 1)
+
+#define MT2701_PIN_95_TCN__FUNC_GPI95 (MTK_PIN_NO(95) | 0)
+#define MT2701_PIN_95_TCN__FUNC_TCN (MTK_PIN_NO(95) | 1)
+
+#define MT2701_PIN_96_TCP__FUNC_GPI96 (MTK_PIN_NO(96) | 0)
+#define MT2701_PIN_96_TCP__FUNC_TCP (MTK_PIN_NO(96) | 1)
+
+#define MT2701_PIN_97_TDN1__FUNC_GPI97 (MTK_PIN_NO(97) | 0)
+#define MT2701_PIN_97_TDN1__FUNC_TDN1 (MTK_PIN_NO(97) | 1)
+
+#define MT2701_PIN_98_TDP1__FUNC_GPI98 (MTK_PIN_NO(98) | 0)
+#define MT2701_PIN_98_TDP1__FUNC_TDP1 (MTK_PIN_NO(98) | 1)
+
+#define MT2701_PIN_99_TDN0__FUNC_GPI99 (MTK_PIN_NO(99) | 0)
+#define MT2701_PIN_99_TDN0__FUNC_TDN0 (MTK_PIN_NO(99) | 1)
+
+#define MT2701_PIN_100_TDP0__FUNC_GPI100 (MTK_PIN_NO(100) | 0)
+#define MT2701_PIN_100_TDP0__FUNC_TDP0 (MTK_PIN_NO(100) | 1)
+
+#define MT2701_PIN_101_SPI2_CSN__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS (MTK_PIN_NO(101) | 1)
+#define MT2701_PIN_101_SPI2_CSN__FUNC_SCL3 (MTK_PIN_NO(101) | 3)
+#define MT2701_PIN_101_SPI2_CSN__FUNC_KROW0 (MTK_PIN_NO(101) | 4)
+
+#define MT2701_PIN_102_SPI2_MI__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI (MTK_PIN_NO(102) | 1)
+#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MO (MTK_PIN_NO(102) | 2)
+#define MT2701_PIN_102_SPI2_MI__FUNC_SDA3 (MTK_PIN_NO(102) | 3)
+#define MT2701_PIN_102_SPI2_MI__FUNC_KROW1 (MTK_PIN_NO(102) | 4)
+
+#define MT2701_PIN_103_SPI2_MO__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO (MTK_PIN_NO(103) | 1)
+#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MI (MTK_PIN_NO(103) | 2)
+#define MT2701_PIN_103_SPI2_MO__FUNC_SCL3 (MTK_PIN_NO(103) | 3)
+#define MT2701_PIN_103_SPI2_MO__FUNC_KROW2 (MTK_PIN_NO(103) | 4)
+
+#define MT2701_PIN_104_SPI2_CLK__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK (MTK_PIN_NO(104) | 1)
+#define MT2701_PIN_104_SPI2_CLK__FUNC_SDA3 (MTK_PIN_NO(104) | 3)
+#define MT2701_PIN_104_SPI2_CLK__FUNC_KROW3 (MTK_PIN_NO(104) | 4)
+
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(105) | 1)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_ANT_SEL0 (MTK_PIN_NO(105) | 2)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_SDA1 (MTK_PIN_NO(105) | 3)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_I2SOUT_BCK (MTK_PIN_NO(105) | 6)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_DBG_MON_B_27 (MTK_PIN_NO(105) | 7)
+
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(106) | 1)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_ANT_SEL1 (MTK_PIN_NO(106) | 2)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_SCL1 (MTK_PIN_NO(106) | 3)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_I2SOUT_LRCK (MTK_PIN_NO(106) | 6)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_DBG_MON_B_28 (MTK_PIN_NO(106) | 7)
+
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(107) | 1)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(107) | 2)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_UTXD0 (MTK_PIN_NO(107) | 5)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_I2SOUT_DATA_OUT (MTK_PIN_NO(107) | 6)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_DBG_MON_B_26 (MTK_PIN_NO(107) | 7)
+
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(108) | 1)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(108) | 2)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM0 (MTK_PIN_NO(108) | 3)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_URXD0 (MTK_PIN_NO(108) | 5)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM1 (MTK_PIN_NO(108) | 6)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_DBG_MON_B_25 (MTK_PIN_NO(108) | 7)
+
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(109) | 1)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_ANT_SEL4 (MTK_PIN_NO(109) | 2)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_SDA2 (MTK_PIN_NO(109) | 3)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_UTXD1 (MTK_PIN_NO(109) | 5)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_PWM2 (MTK_PIN_NO(109) | 6)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_DBG_MON_B_24 (MTK_PIN_NO(109) | 7)
+
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(110) | 1)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_ANT_SEL5 (MTK_PIN_NO(110) | 2)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_SCL2 (MTK_PIN_NO(110) | 3)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(110) | 4)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_URXD1 (MTK_PIN_NO(110) | 5)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_PWM3 (MTK_PIN_NO(110) | 6)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_DBG_MON_B_23 (MTK_PIN_NO(110) | 7)
+
+#define MT2701_PIN_111_MSDC0_DAT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT2701_PIN_111_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(111) | 1)
+#define MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(111) | 4)
+
+#define MT2701_PIN_112_MSDC0_DAT6__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT2701_PIN_112_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(112) | 1)
+#define MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(112) | 4)
+
+#define MT2701_PIN_113_MSDC0_DAT5__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT2701_PIN_113_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(113) | 1)
+#define MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5 (MTK_PIN_NO(113) | 4)
+
+#define MT2701_PIN_114_MSDC0_DAT4__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT2701_PIN_114_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(114) | 1)
+#define MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4 (MTK_PIN_NO(114) | 4)
+
+#define MT2701_PIN_115_MSDC0_RSTB__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT2701_PIN_115_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(115) | 1)
+#define MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8 (MTK_PIN_NO(115) | 4)
+
+#define MT2701_PIN_116_MSDC0_CMD__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT2701_PIN_116_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(116) | 1)
+#define MT2701_PIN_116_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(116) | 4)
+
+#define MT2701_PIN_117_MSDC0_CLK__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT2701_PIN_117_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(117) | 1)
+#define MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(117) | 4)
+
+#define MT2701_PIN_118_MSDC0_DAT3__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT2701_PIN_118_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(118) | 1)
+#define MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3 (MTK_PIN_NO(118) | 4)
+
+#define MT2701_PIN_119_MSDC0_DAT2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT2701_PIN_119_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(119) | 1)
+#define MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2 (MTK_PIN_NO(119) | 4)
+
+#define MT2701_PIN_120_MSDC0_DAT1__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT2701_PIN_120_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(120) | 1)
+#define MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1 (MTK_PIN_NO(120) | 4)
+
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(121) | 1)
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0 (MTK_PIN_NO(121) | 4)
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(121) | 5)
+
+#define MT2701_PIN_122_CEC__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT2701_PIN_122_CEC__FUNC_CEC (MTK_PIN_NO(122) | 1)
+#define MT2701_PIN_122_CEC__FUNC_SDA2 (MTK_PIN_NO(122) | 4)
+#define MT2701_PIN_122_CEC__FUNC_URXD0 (MTK_PIN_NO(122) | 5)
+
+#define MT2701_PIN_123_HTPLG__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT2701_PIN_123_HTPLG__FUNC_HTPLG (MTK_PIN_NO(123) | 1)
+#define MT2701_PIN_123_HTPLG__FUNC_SCL2 (MTK_PIN_NO(123) | 4)
+#define MT2701_PIN_123_HTPLG__FUNC_UTXD0 (MTK_PIN_NO(123) | 5)
+
+#define MT2701_PIN_124_HDMISCK__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT2701_PIN_124_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(124) | 1)
+#define MT2701_PIN_124_HDMISCK__FUNC_SDA1 (MTK_PIN_NO(124) | 4)
+#define MT2701_PIN_124_HDMISCK__FUNC_PWM3 (MTK_PIN_NO(124) | 5)
+
+#define MT2701_PIN_125_HDMISD__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define MT2701_PIN_125_HDMISD__FUNC_HDMISD (MTK_PIN_NO(125) | 1)
+#define MT2701_PIN_125_HDMISD__FUNC_SCL1 (MTK_PIN_NO(125) | 4)
+#define MT2701_PIN_125_HDMISD__FUNC_PWM4 (MTK_PIN_NO(125) | 5)
+
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_I2S0_MCLK (MTK_PIN_NO(126) | 1)
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_WCN_I2S_MCLK (MTK_PIN_NO(126) | 6)
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_DBG_MON_B_6 (MTK_PIN_NO(126) | 7)
+
+#define MT2701_PIN_199_SPI1_CLK__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK (MTK_PIN_NO(199) | 1)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(199) | 3)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_KCOL3 (MTK_PIN_NO(199) | 4)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_DBG_MON_B_15 (MTK_PIN_NO(199) | 7)
+
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_SPDIF_OUT (MTK_PIN_NO(200) | 1)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_G1_TXD3 (MTK_PIN_NO(200) | 5)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_URXD2 (MTK_PIN_NO(200) | 6)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_DBG_MON_B_16 (MTK_PIN_NO(200) | 7)
+
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_SPDIF_IN0 (MTK_PIN_NO(201) | 1)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_G1_TXEN (MTK_PIN_NO(201) | 5)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_UTXD2 (MTK_PIN_NO(201) | 6)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(201) | 7)
+
+#define MT2701_PIN_202_SPDIF_IN1__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define MT2701_PIN_202_SPDIF_IN1__FUNC_SPDIF_IN1 (MTK_PIN_NO(202) | 1)
+
+#define MT2701_PIN_203_PWM0__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define MT2701_PIN_203_PWM0__FUNC_PWM0 (MTK_PIN_NO(203) | 1)
+#define MT2701_PIN_203_PWM0__FUNC_DISP_PWM (MTK_PIN_NO(203) | 2)
+#define MT2701_PIN_203_PWM0__FUNC_G1_TXD2 (MTK_PIN_NO(203) | 5)
+#define MT2701_PIN_203_PWM0__FUNC_DBG_MON_B_18 (MTK_PIN_NO(203) | 7)
+#define MT2701_PIN_203_PWM0__FUNC_I2S2_DATA (MTK_PIN_NO(203) | 9)
+
+#define MT2701_PIN_204_PWM1__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define MT2701_PIN_204_PWM1__FUNC_PWM1 (MTK_PIN_NO(204) | 1)
+#define MT2701_PIN_204_PWM1__FUNC_CLKM3 (MTK_PIN_NO(204) | 2)
+#define MT2701_PIN_204_PWM1__FUNC_G1_TXD1 (MTK_PIN_NO(204) | 5)
+#define MT2701_PIN_204_PWM1__FUNC_DBG_MON_B_19 (MTK_PIN_NO(204) | 7)
+#define MT2701_PIN_204_PWM1__FUNC_I2S3_DATA (MTK_PIN_NO(204) | 9)
+
+#define MT2701_PIN_205_PWM2__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define MT2701_PIN_205_PWM2__FUNC_PWM2 (MTK_PIN_NO(205) | 1)
+#define MT2701_PIN_205_PWM2__FUNC_CLKM2 (MTK_PIN_NO(205) | 2)
+#define MT2701_PIN_205_PWM2__FUNC_G1_TXD0 (MTK_PIN_NO(205) | 5)
+#define MT2701_PIN_205_PWM2__FUNC_DBG_MON_B_20 (MTK_PIN_NO(205) | 7)
+
+#define MT2701_PIN_206_PWM3__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define MT2701_PIN_206_PWM3__FUNC_PWM3 (MTK_PIN_NO(206) | 1)
+#define MT2701_PIN_206_PWM3__FUNC_CLKM1 (MTK_PIN_NO(206) | 2)
+#define MT2701_PIN_206_PWM3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(206) | 3)
+#define MT2701_PIN_206_PWM3__FUNC_G1_TXC (MTK_PIN_NO(206) | 5)
+#define MT2701_PIN_206_PWM3__FUNC_DBG_MON_B_21 (MTK_PIN_NO(206) | 7)
+
+#define MT2701_PIN_207_PWM4__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define MT2701_PIN_207_PWM4__FUNC_PWM4 (MTK_PIN_NO(207) | 1)
+#define MT2701_PIN_207_PWM4__FUNC_CLKM0 (MTK_PIN_NO(207) | 2)
+#define MT2701_PIN_207_PWM4__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(207) | 3)
+#define MT2701_PIN_207_PWM4__FUNC_G1_RXC (MTK_PIN_NO(207) | 5)
+#define MT2701_PIN_207_PWM4__FUNC_DBG_MON_B_22 (MTK_PIN_NO(207) | 7)
+
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(208) | 1)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PWM0 (MTK_PIN_NO(208) | 2)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_ANT_SEL5 (MTK_PIN_NO(208) | 4)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM (MTK_PIN_NO(208) | 5)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(208) | 7)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PCIE0_PERST_N (MTK_PIN_NO(208) | 11)
+
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(209) | 1)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_MSDC1_WP (MTK_PIN_NO(209) | 2)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PWM1 (MTK_PIN_NO(209) | 5)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_DBG_MON_A_32 (MTK_PIN_NO(209) | 7)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PCIE1_PERST_N (MTK_PIN_NO(209) | 11)
+
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_GPIO236 (MTK_PIN_NO(236) | 0)
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3 (MTK_PIN_NO(236) | 1)
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_IDDIG (MTK_PIN_NO(236) | 2)
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_DBG_MON_A_1 (MTK_PIN_NO(236) | 7)
+
+#define MT2701_PIN_237_EXT_SDIO2__FUNC_GPIO237 (MTK_PIN_NO(237) | 0)
+#define MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2 (MTK_PIN_NO(237) | 1)
+#define MT2701_PIN_237_EXT_SDIO2__FUNC_DRV_VBUS (MTK_PIN_NO(237) | 2)
+
+#define MT2701_PIN_238_EXT_SDIO1__FUNC_GPIO238 (MTK_PIN_NO(238) | 0)
+#define MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1 (MTK_PIN_NO(238) | 1)
+#define MT2701_PIN_238_EXT_SDIO1__FUNC_IDDIG_P1 (MTK_PIN_NO(238) | 2)
+
+#define MT2701_PIN_239_EXT_SDIO0__FUNC_GPIO239 (MTK_PIN_NO(239) | 0)
+#define MT2701_PIN_239_EXT_SDIO0__FUNC_EXT_SDIO0 (MTK_PIN_NO(239) | 1)
+#define MT2701_PIN_239_EXT_SDIO0__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(239) | 2)
+
+#define MT2701_PIN_240_EXT_XCS__FUNC_GPIO240 (MTK_PIN_NO(240) | 0)
+#define MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS (MTK_PIN_NO(240) | 1)
+
+#define MT2701_PIN_241_EXT_SCK__FUNC_GPIO241 (MTK_PIN_NO(241) | 0)
+#define MT2701_PIN_241_EXT_SCK__FUNC_EXT_SCK (MTK_PIN_NO(241) | 1)
+
+#define MT2701_PIN_242_URTS2__FUNC_GPIO242 (MTK_PIN_NO(242) | 0)
+#define MT2701_PIN_242_URTS2__FUNC_URTS2 (MTK_PIN_NO(242) | 1)
+#define MT2701_PIN_242_URTS2__FUNC_UTXD3 (MTK_PIN_NO(242) | 2)
+#define MT2701_PIN_242_URTS2__FUNC_URXD3 (MTK_PIN_NO(242) | 3)
+#define MT2701_PIN_242_URTS2__FUNC_SCL1 (MTK_PIN_NO(242) | 4)
+#define MT2701_PIN_242_URTS2__FUNC_DBG_MON_B_32 (MTK_PIN_NO(242) | 7)
+
+#define MT2701_PIN_243_UCTS2__FUNC_GPIO243 (MTK_PIN_NO(243) | 0)
+#define MT2701_PIN_243_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(243) | 1)
+#define MT2701_PIN_243_UCTS2__FUNC_URXD3 (MTK_PIN_NO(243) | 2)
+#define MT2701_PIN_243_UCTS2__FUNC_UTXD3 (MTK_PIN_NO(243) | 3)
+#define MT2701_PIN_243_UCTS2__FUNC_SDA1 (MTK_PIN_NO(243) | 4)
+#define MT2701_PIN_243_UCTS2__FUNC_DBG_MON_A_6 (MTK_PIN_NO(243) | 7)
+
+#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_GPIO244 (MTK_PIN_NO(244) | 0)
+#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_HDMI_SDA_RX (MTK_PIN_NO(244) | 1)
+
+#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_GPIO245 (MTK_PIN_NO(245) | 0)
+#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_HDMI_SCL_RX (MTK_PIN_NO(245) | 1)
+
+#define MT2701_PIN_246_MHL_SENCE__FUNC_GPIO246 (MTK_PIN_NO(246) | 0)
+
+#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_GPIO247 (MTK_PIN_NO(247) | 0)
+#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_HDMI_HPD_RX (MTK_PIN_NO(247) | 1)
+
+#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_GPIO248 (MTK_PIN_NO(248) | 0)
+#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_HDMI_TESTOUTP_RX (MTK_PIN_NO(248) | 1)
+
+#define MT2701_PIN_249_MSDC0E_RSTB__FUNC_MSDC0E_RSTB (MTK_PIN_NO(249) | 9)
+
+#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_MSDC3_DAT7 (MTK_PIN_NO(250) | 9)
+#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_PCIE0_CLKREQ_N (MTK_PIN_NO(250) | 14)
+
+#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_MSDC3_DAT6 (MTK_PIN_NO(251) | 9)
+#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(251) | 14)
+
+#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_MSDC3_DAT5 (MTK_PIN_NO(252) | 9)
+#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_PCIE1_CLKREQ_N (MTK_PIN_NO(252) | 14)
+
+#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_MSDC3_DAT4 (MTK_PIN_NO(253) | 9)
+#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(253) | 14)
+
+#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(254) | 9)
+#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_PCIE2_CLKREQ_N (MTK_PIN_NO(254) | 14)
+
+#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(255) | 9)
+#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(255) | 14)
+
+#define MT2701_PIN_256_MSDC0E_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(256) | 9)
+
+#define MT2701_PIN_257_MSDC0E_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(257) | 9)
+
+#define MT2701_PIN_258_MSDC0E_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(258) | 9)
+
+#define MT2701_PIN_259_MSDC0E_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(259) | 9)
+
+#define MT2701_PIN_260_MSDC0E_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(260) | 9)
+
+#define MT2701_PIN_261_MSDC1_INS__FUNC_GPIO261 (MTK_PIN_NO(261) | 0)
+#define MT2701_PIN_261_MSDC1_INS__FUNC_MSDC1_INS (MTK_PIN_NO(261) | 1)
+#define MT2701_PIN_261_MSDC1_INS__FUNC_DBG_MON_B_29 (MTK_PIN_NO(261) | 7)
+
+#define MT2701_PIN_262_G2_TXEN__FUNC_GPIO262 (MTK_PIN_NO(262) | 0)
+#define MT2701_PIN_262_G2_TXEN__FUNC_G2_TXEN (MTK_PIN_NO(262) | 1)
+
+#define MT2701_PIN_263_G2_TXD3__FUNC_GPIO263 (MTK_PIN_NO(263) | 0)
+#define MT2701_PIN_263_G2_TXD3__FUNC_G2_TXD3 (MTK_PIN_NO(263) | 1)
+#define MT2701_PIN_263_G2_TXD3__FUNC_ANT_SEL5 (MTK_PIN_NO(263) | 6)
+
+#define MT2701_PIN_264_G2_TXD2__FUNC_GPIO264 (MTK_PIN_NO(264) | 0)
+#define MT2701_PIN_264_G2_TXD2__FUNC_G2_TXD2 (MTK_PIN_NO(264) | 1)
+#define MT2701_PIN_264_G2_TXD2__FUNC_ANT_SEL4 (MTK_PIN_NO(264) | 6)
+
+#define MT2701_PIN_265_G2_TXD1__FUNC_GPIO265 (MTK_PIN_NO(265) | 0)
+#define MT2701_PIN_265_G2_TXD1__FUNC_G2_TXD1 (MTK_PIN_NO(265) | 1)
+#define MT2701_PIN_265_G2_TXD1__FUNC_ANT_SEL3 (MTK_PIN_NO(265) | 6)
+
+#define MT2701_PIN_266_G2_TXD0__FUNC_GPIO266 (MTK_PIN_NO(266) | 0)
+#define MT2701_PIN_266_G2_TXD0__FUNC_G2_TXD0 (MTK_PIN_NO(266) | 1)
+#define MT2701_PIN_266_G2_TXD0__FUNC_ANT_SEL2 (MTK_PIN_NO(266) | 6)
+
+#define MT2701_PIN_267_G2_TXC__FUNC_GPIO267 (MTK_PIN_NO(267) | 0)
+#define MT2701_PIN_267_G2_TXC__FUNC_G2_TXC (MTK_PIN_NO(267) | 1)
+
+#define MT2701_PIN_268_G2_RXC__FUNC_GPIO268 (MTK_PIN_NO(268) | 0)
+#define MT2701_PIN_268_G2_RXC__FUNC_G2_RXC (MTK_PIN_NO(268) | 1)
+
+#define MT2701_PIN_269_G2_RXD0__FUNC_GPIO269 (MTK_PIN_NO(269) | 0)
+#define MT2701_PIN_269_G2_RXD0__FUNC_G2_RXD0 (MTK_PIN_NO(269) | 1)
+
+#define MT2701_PIN_270_G2_RXD1__FUNC_GPIO270 (MTK_PIN_NO(270) | 0)
+#define MT2701_PIN_270_G2_RXD1__FUNC_G2_RXD1 (MTK_PIN_NO(270) | 1)
+
+#define MT2701_PIN_271_G2_RXD2__FUNC_GPIO271 (MTK_PIN_NO(271) | 0)
+#define MT2701_PIN_271_G2_RXD2__FUNC_G2_RXD2 (MTK_PIN_NO(271) | 1)
+
+#define MT2701_PIN_272_G2_RXD3__FUNC_GPIO272 (MTK_PIN_NO(272) | 0)
+#define MT2701_PIN_272_G2_RXD3__FUNC_G2_RXD3 (MTK_PIN_NO(272) | 1)
+
+#define MT2701_PIN_274_G2_RXDV__FUNC_GPIO274 (MTK_PIN_NO(274) | 0)
+#define MT2701_PIN_274_G2_RXDV__FUNC_G2_RXDV (MTK_PIN_NO(274) | 1)
+
+#define MT2701_PIN_275_MDC__FUNC_GPIO275 (MTK_PIN_NO(275) | 0)
+#define MT2701_PIN_275_MDC__FUNC_MDC (MTK_PIN_NO(275) | 1)
+#define MT2701_PIN_275_MDC__FUNC_ANT_SEL0 (MTK_PIN_NO(275) | 6)
+
+#define MT2701_PIN_276_MDIO__FUNC_GPIO276 (MTK_PIN_NO(276) | 0)
+#define MT2701_PIN_276_MDIO__FUNC_MDIO (MTK_PIN_NO(276) | 1)
+#define MT2701_PIN_276_MDIO__FUNC_ANT_SEL1 (MTK_PIN_NO(276) | 6)
+
+#define MT2701_PIN_278_JTAG_RESET__FUNC_GPIO278 (MTK_PIN_NO(278) | 0)
+#define MT2701_PIN_278_JTAG_RESET__FUNC_JTAG_RESET (MTK_PIN_NO(278) | 1)
+
+#endif /* __DTS_MT2701_PINFUNC_H */
diff --git a/arch/arm/boot/dts/mediatek/mt2701.dtsi b/arch/arm/boot/dts/mediatek/mt2701.dtsi
new file mode 100644
index 0000000000000..ce6a4015fed5a
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt2701.dtsi
@@ -0,0 +1,756 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Erin.Lo <erin.lo@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt2701-power.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
+#include <dt-bindings/reset/mt2701-resets.h>
+#include "mt2701-pinfunc.h"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "mediatek,mt2701";
+	interrupt-parent = <&cirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt81xx-tz-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		trustzone-bootinfo@80002000 {
+			compatible = "mediatek,trustzone-bootinfo";
+			reg = <0 0x80002000 0 0x1000>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	clk26m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	rtc32k: oscillator@1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "rtc32k";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu_thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <1000>;
+
+			trips {
+				threshold: trip-point@0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point@1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit@0 {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	topckgen: syscon@10000000 {
+		compatible = "mediatek,mt2701-topckgen", "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt2701-infracfg", "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible = "mediatek,mt2701-pericfg", "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	syscfg_pctl_a: syscfg@10005000 {
+		compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon";
+		reg = <0 0x10005000 0 0x1000>;
+	};
+
+	scpsys: power-controller@10006000 {
+		compatible = "mediatek,mt2701-scpsys", "syscon";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		infracfg = <&infracfg>;
+		clocks = <&topckgen CLK_TOP_MM_SEL>,
+			 <&topckgen CLK_TOP_MFG_SEL>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "mm", "mfg", "ethif";
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt2701-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0 0x10007000 0 0x100>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt2701-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0 0x10008000 0 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	pio: pinctrl@1000b000 {
+		compatible = "mediatek,mt2701-pinctrl";
+		reg = <0 0x1000b000 0 0x1000>;
+		mediatek,pctl-regmap = <&syscfg_pctl_a>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	smi_common: smi@1000c000 {
+		compatible = "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt2701-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200100 0 0x1c>;
+	};
+
+	cirq: interrupt-controller@10204000 {
+		compatible = "mediatek,mt2701-cirq",
+			     "mediatek,mtk-cirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&sysirq>;
+		reg = <0 0x10204000 0 0x400>;
+		mediatek,ext-irq-range = <32 200>;
+	};
+
+	iommu: mmsys_iommu@10205000 {
+		compatible = "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb0 &larb1 &larb2>;
+		#iommu-cells = <1>;
+	};
+
+	apmixedsys: syscon@10209000 {
+		compatible = "mediatek,mt2701-apmixedsys", "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10212000 0 0x2000>,
+		      <0 0x10214000 0 0x2000>,
+		      <0 0x10216000 0 0x2000>;
+	};
+
+	auxadc: adc@11001000 {
+		compatible = "mediatek,mt2701-auxadc";
+		reg = <0 0x11001000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "main";
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	i2c0: i2c@11007000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11007000 0 0x70>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11008000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11008000 0 0x70>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11009000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11009000 0 0x70>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@1100a000 {
+		compatible = "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x1100a000 0 0x100>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI0_SEL>,
+			 <&pericfg CLK_PERI_SPI0>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	thermal: thermal@1100b000 {
+		#thermal-sensor-cells = <0>;
+		compatible = "mediatek,mt2701-thermal";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "therm", "auxadc";
+		resets = <&pericfg MT2701_PERI_THERM_SW_RST>;
+		reset-names = "therm";
+		mediatek,auxadc = <&auxadc>;
+		mediatek,apmixedsys = <&apmixedsys>;
+	};
+
+	nandc: nand-controller@1100d000 {
+		compatible = "mediatek,mt2701-nfc";
+		reg = <0 0x1100d000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI>,
+			 <&pericfg CLK_PERI_NFI_PAD>;
+		clock-names = "nfi_clk", "pad_clk";
+		status = "disabled";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	bch: ecc@1100e000 {
+		compatible = "mediatek,mt2701-ecc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_ECC>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
+	nor_flash: spi@11014000 {
+		compatible = "mediatek,mt2701-nor",
+			     "mediatek,mt8173-nor";
+		reg = <0 0x11014000 0 0xe0>;
+		clocks = <&pericfg CLK_PERI_FLASH>,
+			 <&topckgen CLK_TOP_FLASH_SEL>;
+		clock-names = "spi", "sf";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@11016000 {
+		compatible = "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11016000 0 0x100>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI1_SEL>,
+			 <&pericfg CLK_PERI_SPI1>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi2: spi@11017000 {
+		compatible = "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11017000 0 0x1000>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI2_SEL>,
+			 <&pericfg CLK_PERI_SPI2>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	audsys: clock-controller@11220000 {
+		compatible = "mediatek,mt2701-audsys", "syscon";
+		reg = <0 0x11220000 0 0x2000>;
+		#clock-cells = <1>;
+
+		afe: audio-controller {
+			compatible = "mediatek,mt2701-audio";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "afe", "asys";
+			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+			clocks = <&infracfg CLK_INFRA_AUDIO>,
+				 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+				 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+				 <&topckgen CLK_TOP_AUD_48K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_44K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+				 <&audsys CLK_AUD_I2SO1>,
+				 <&audsys CLK_AUD_I2SO2>,
+				 <&audsys CLK_AUD_I2SO3>,
+				 <&audsys CLK_AUD_I2SO4>,
+				 <&audsys CLK_AUD_I2SIN1>,
+				 <&audsys CLK_AUD_I2SIN2>,
+				 <&audsys CLK_AUD_I2SIN3>,
+				 <&audsys CLK_AUD_I2SIN4>,
+				 <&audsys CLK_AUD_ASRCO1>,
+				 <&audsys CLK_AUD_ASRCO2>,
+				 <&audsys CLK_AUD_ASRCO3>,
+				 <&audsys CLK_AUD_ASRCO4>,
+				 <&audsys CLK_AUD_AFE>,
+				 <&audsys CLK_AUD_AFE_CONN>,
+				 <&audsys CLK_AUD_A1SYS>,
+				 <&audsys CLK_AUD_A2SYS>,
+				 <&audsys CLK_AUD_AFE_MRGIF>;
+
+			clock-names = "infra_sys_audio_clk",
+				      "top_audio_mux1_sel",
+				      "top_audio_mux2_sel",
+				      "top_audio_a1sys_hp",
+				      "top_audio_a2sys_hp",
+				      "i2s0_src_sel",
+				      "i2s1_src_sel",
+				      "i2s2_src_sel",
+				      "i2s3_src_sel",
+				      "i2s0_src_div",
+				      "i2s1_src_div",
+				      "i2s2_src_div",
+				      "i2s3_src_div",
+				      "i2s0_mclk_en",
+				      "i2s1_mclk_en",
+				      "i2s2_mclk_en",
+				      "i2s3_mclk_en",
+				      "i2so0_hop_ck",
+				      "i2so1_hop_ck",
+				      "i2so2_hop_ck",
+				      "i2so3_hop_ck",
+				      "i2si0_hop_ck",
+				      "i2si1_hop_ck",
+				      "i2si2_hop_ck",
+				      "i2si3_hop_ck",
+				      "asrc0_out_ck",
+				      "asrc1_out_ck",
+				      "asrc2_out_ck",
+				      "asrc3_out_ck",
+				      "audio_afe_pd",
+				      "audio_afe_conn_pd",
+				      "audio_a1sys_pd",
+				      "audio_a2sys_pd",
+				      "audio_mrgif_pd";
+
+			assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+					  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+			assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
+						 <&topckgen CLK_TOP_AUD2PLL_90M>;
+			assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+		};
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt2701-mmsys", "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	bls: pwm@1400a000 {
+		compatible = "mediatek,mt2701-disp-pwm";
+		reg = <0 0x1400a000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&mmsys CLK_MM_MDP_BLS_26M>, <&mmsys CLK_MM_DISP_BLS>;
+		clock-names = "main", "mm";
+		status = "disabled";
+	};
+
+	larb0: larb@14010000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x14010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <0>;
+		clocks = <&mmsys CLK_MM_SMI_LARB0>,
+			 <&mmsys CLK_MM_SMI_LARB0>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	imgsys: syscon@15000000 {
+		compatible = "mediatek,mt2701-imgsys", "syscon";
+		reg = <0 0x15000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb2: larb@15001000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x15001000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <2>;
+		clocks = <&imgsys CLK_IMG_SMI_COMM>,
+			 <&imgsys CLK_IMG_SMI_COMM>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+	};
+
+	jpegdec: jpegdec@15004000 {
+		compatible = "mediatek,mt2701-jpgdec";
+		reg = <0 0x15004000 0 0x1000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+			  <&imgsys CLK_IMG_JPGDEC>;
+		clock-names = "jpgdec-smi",
+			      "jpgdec";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+	};
+
+	jpegenc: jpegenc@1500a000 {
+		compatible = "mediatek,mt2701-jpgenc",
+			     "mediatek,mtk-jpgenc";
+		reg = <0 0x1500a000 0 0x1000>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&imgsys CLK_IMG_VENC>;
+		clock-names = "jpgenc";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
+	};
+
+	vdecsys: syscon@16000000 {
+		compatible = "mediatek,mt2701-vdecsys", "syscon";
+		reg = <0 0x16000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb1: larb@16010000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <1>;
+		clocks = <&vdecsys CLK_VDEC_CKGEN>,
+			 <&vdecsys CLK_VDEC_LARB>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+	};
+
+	hifsys: syscon@1a000000 {
+		compatible = "mediatek,mt2701-hifsys", "syscon";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	usb0: usb@1a1c0000 {
+		compatible = "mediatek,mt2701-xhci", "mediatek,mtk-xhci";
+		reg = <0 0x1a1c0000 0 0x1000>,
+		      <0 0x1a1c4700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy0: t-phy@1a1c4000 {
+		compatible = "mediatek,mt2701-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a1c4000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port0: usb-phy@1a1c4800 {
+			reg = <0 0x1a1c4800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port0: usb-phy@1a1c4900 {
+			reg = <0 0x1a1c4900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb1: usb@1a240000 {
+		compatible = "mediatek,mt2701-xhci", "mediatek,mtk-xhci";
+		reg = <0 0x1a240000 0 0x1000>,
+		      <0 0x1a244700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy1: t-phy@1a244000 {
+		compatible = "mediatek,mt2701-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a244000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port1: usb-phy@1a244800 {
+			reg = <0 0x1a244800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port1: usb-phy@1a244900 {
+			reg = <0 0x1a244900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb2: usb@11200000 {
+		compatible = "mediatek,mt2701-musb",
+			     "mediatek,mtk-musb";
+		reg = <0 0x11200000 0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "mc";
+		phys = <&u2port2 PHY_TYPE_USB2>;
+		dr_mode = "otg";
+		clocks = <&pericfg CLK_PERI_USB0>,
+			 <&pericfg CLK_PERI_USB0_MCU>,
+			 <&pericfg CLK_PERI_USB_SLV>;
+		clock-names = "main","mcu","univpll";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		status = "disabled";
+	};
+
+	u2phy0: t-phy@11210000 {
+		compatible = "mediatek,mt2701-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x11210000 0 0x0800>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "okay";
+
+		u2port2: usb-phy@1a1c4800 {
+			reg = <0 0x11210800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	ethsys: syscon@1b000000 {
+		compatible = "mediatek,mt2701-ethsys", "syscon";
+		reg = <0 0x1b000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	eth: ethernet@1b100000 {
+		compatible = "mediatek,mt2701-eth", "syscon";
+		reg = <0 0x1b100000 0 0x20000>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&ethsys CLK_ETHSYS_ESW>,
+			 <&ethsys CLK_ETHSYS_GP1>,
+			 <&ethsys CLK_ETHSYS_GP2>,
+			 <&apmixedsys CLK_APMIXED_TRGPLL>;
+		clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
+		resets = <&ethsys MT2701_ETHSYS_FE_RST>,
+			 <&ethsys MT2701_ETHSYS_GMAC_RST>,
+			 <&ethsys MT2701_ETHSYS_PPE_RST>;
+		reset-names = "fe", "gmac", "ppe";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		mediatek,ethsys = <&ethsys>;
+		mediatek,pctl = <&syscfg_pctl_a>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	bdpsys: syscon@1c000000 {
+		compatible = "mediatek,mt2701-bdpsys", "syscon";
+		reg = <0 0x1c000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6323.dtsi b/arch/arm/boot/dts/mediatek/mt6323.dtsi
new file mode 100644
index 0000000000000..7fda40ab5fe83
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6323.dtsi
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+&pwrap {
+	pmic: mt6323 {
+		compatible = "mediatek,mt6323";
+		interrupt-parent = <&pio>;
+		interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mt6323_leds: leds {
+			compatible = "mediatek,mt6323-led";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mt6323regulator: mt6323regulator{
+			compatible = "mediatek,mt6323-regulator";
+
+			mt6323_vproc_reg: buck_vproc{
+				regulator-name = "vproc";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vsys_reg: buck_vsys{
+				regulator-name = "vsys";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <2987500>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vpa_reg: buck_vpa{
+				regulator-name = "vpa";
+				regulator-min-microvolt = < 500000>;
+				regulator-max-microvolt = <3650000>;
+			};
+
+			mt6323_vtcxo_reg: ldo_vtcxo{
+				regulator-name = "vtcxo";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <90>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcn28_reg: ldo_vcn28{
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+				regulator-name = "vcn33_bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+				regulator-name = "vcn33_wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_va_reg: ldo_va{
+				regulator-name = "va";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcama_reg: ldo_vcama{
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vio28_reg: ldo_vio28{
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vusb_reg: ldo_vusb{
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmc_reg: ldo_vmc{
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmch_reg: ldo_vmch{
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vemc3v3_reg: ldo_vemc3v3{
+				regulator-name = "vemc3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vgp1_reg: ldo_vgp1{
+				regulator-name = "vgp1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp2_reg: ldo_vgp2{
+				regulator-name = "vgp2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp3_reg: ldo_vgp3{
+				regulator-name = "vgp3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcn18_reg: ldo_vcn18{
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim1_reg: ldo_vsim1{
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim2_reg: ldo_vsim2{
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vrtc_reg: ldo_vrtc{
+				regulator-name = "vrtc";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamaf_reg: ldo_vcamaf{
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vibr_reg: ldo_vibr{
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+			};
+
+			mt6323_vrf18_reg: ldo_vrf18{
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1825000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-enable-ramp-delay = <187>;
+			};
+
+			mt6323_vm_reg: ldo_vm{
+				regulator-name = "vm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vio18_reg: ldo_vio18{
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamd_reg: ldo_vcamd{
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcamio_reg: ldo_vcamio{
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+		};
+
+		mt6323keys: mt6323keys {
+			compatible = "mediatek,mt6323-keys";
+			mediatek,long-press-mode = <1>;
+			power-off-time-sec = <0>;
+
+			power {
+				linux,keycodes = <116>;
+				wakeup-source;
+			};
+
+			home {
+				linux,keycodes = <114>;
+			};
+		};
+
+		codec: mt6397codec {
+			compatible = "mediatek,mt6397-codec";
+		};
+
+		power-controller {
+			compatible = "mediatek,mt6323-pwrc";
+		};
+
+		rtc {
+			compatible = "mediatek,mt6323-rtc";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6580-evbp1.dts b/arch/arm/boot/dts/mediatek/mt6580-evbp1.dts
new file mode 100644
index 0000000000000..755a0774a8eeb
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6580-evbp1.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt6580.dtsi"
+
+/ {
+	model = "MediaTek MT6580 evaluation board";
+	compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6580.dtsi b/arch/arm/boot/dts/mediatek/mt6580.dtsi
new file mode 100644
index 0000000000000..9e17698c06093
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6580.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt6580";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt6580-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt6580-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200100 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10211000 0x1000>,
+		      <0x10212000 0x2000>,
+		      <0x10214000 0x2000>,
+		      <0x10216000 0x2000>;
+	};
+
+	uart0: serial@11005000 {
+		compatible = "mediatek,mt6580-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11005000 0x400>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11006000 {
+		compatible = "mediatek,mt6580-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11006000 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6582-prestigio-pmt5008-3g.dts b/arch/arm/boot/dts/mediatek/mt6582-prestigio-pmt5008-3g.dts
new file mode 100644
index 0000000000000..b057e037f9407
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6582-prestigio-pmt5008-3g.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+/dts-v1/;
+#include "mt6582.dtsi"
+
+/ {
+	model = "Prestigio PMT5008 3G";
+	compatible = "prestigio,pmt5008-3g", "mediatek,mt6582";
+
+	aliases {
+		bootargs = "console=ttyS0,921600n8 earlyprintk";
+		serial0 = &uart0;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6582.dtsi b/arch/arm/boot/dts/mediatek/mt6582.dtsi
new file mode 100644
index 0000000000000..4263371784cd1
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6582.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mediatek,mt6582";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer: timer@11008000 {
+		compatible = "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt6582-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200100 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10211000 0x1000>,
+		      <0x10212000 0x2000>,
+		      <0x10214000 0x2000>,
+		      <0x10216000 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11002000 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11003000 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11004000 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11005000 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt6582-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0x10007000 0x100>;
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6589-aquaris5.dts b/arch/arm/boot/dts/mediatek/mt6589-aquaris5.dts
new file mode 100644
index 0000000000000..1e7079a3b449f
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6589-aquaris5.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt6589.dtsi"
+
+/ {
+	model = "bq Aquaris5";
+	compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
+
+	chosen {
+		bootargs = "console=ttyS0,921600n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6589-fairphone-fp1.dts b/arch/arm/boot/dts/mediatek/mt6589-fairphone-fp1.dts
new file mode 100644
index 0000000000000..c952347981de7
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6589-fairphone-fp1.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+#include "mt6589.dtsi"
+
+/ {
+	model = "Fairphone 1";
+	compatible = "fairphone,fp1", "mediatek,mt6589";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&cpus {
+	/* SMP is not stable on this board, makes the kernel panic */
+	/delete-property/ enable-method;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6589.dtsi b/arch/arm/boot/dts/mediatek/mt6589.dtsi
new file mode 100644
index 0000000000000..c6babc8ad2ba6
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6589.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
+ *
+*/
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mediatek,mt6589";
+	interrupt-parent = <&sysirq>;
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		system_clk: dummy13m {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		rtc_clk: dummy32k {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		uart_clk: dummy26m {
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt6577-timer";
+			reg = <0x10008000 0x80>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt6589-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0x10200100 0x1c>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0x10211000 0x1000>,
+			      <0x10212000 0x2000>,
+			      <0x10214000 0x2000>,
+			      <0x10216000 0x2000>;
+		};
+
+		uart0: serial@11006000 {
+			compatible = "mediatek,mt6577-uart";
+			reg = <0x11006000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@11007000 {
+			compatible = "mediatek,mt6577-uart";
+			reg = <0x11007000 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@11008000 {
+			compatible = "mediatek,mt6577-uart";
+			reg = <0x11008000 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart3: serial@11009000 {
+			compatible = "mediatek,mt6577-uart";
+			reg = <0x11009000 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		wdt: watchdog@10000000 {
+			compatible = "mediatek,mt6589-wdt";
+			reg = <0x10000000 0x44>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6592-evb.dts b/arch/arm/boot/dts/mediatek/mt6592-evb.dts
new file mode 100644
index 0000000000000..5e00c1cca2d12
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6592-evb.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Howard Chen <ibanezchen@gmail.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt6592.dtsi"
+
+/ {
+	model = "mt6592 evb";
+	compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6592.dtsi b/arch/arm/boot/dts/mediatek/mt6592.dtsi
new file mode 100644
index 0000000000000..3716f8db951ca
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6592.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Howard Chen <ibanezchen@gmail.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mediatek,mt6592";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+		cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x4>;
+		};
+		cpu@5 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x5>;
+		};
+		cpu@6 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x6>;
+		};
+		cpu@7 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x7>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200220 {
+		compatible = "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200220 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10211000 0x1000>,
+		      <0x10212000 0x1000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt6577-uart";
+		reg = <0x11002000 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt6577-uart";
+		reg = <0x11003000 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt6577-uart";
+		reg = <0x11004000 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt6577-uart";
+		reg = <0x11005000 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7623.dtsi b/arch/arm/boot/dts/mediatek/mt7623.dtsi
new file mode 100644
index 0000000000000..f0b4a09004b31
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623.dtsi
@@ -0,0 +1,1313 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ *	   Ryder Lee <ryder.lee@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/pinctrl/mt7623-pinfunc.h>
+#include <dt-bindings/power/mt2701-power.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/mt2701-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "mediatek,mt7623";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-98000000 {
+			opp-hz = /bits/ 64 <98000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-198000000 {
+			opp-hz = /bits/ 64 <198000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-398000000 {
+			opp-hz = /bits/ 64 <398000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-747500000 {
+			opp-hz = /bits/ 64 <747500000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-1040000000 {
+			opp-hz = /bits/ 64 <1040000000>;
+			opp-microvolt = <1150000>;
+		};
+
+		opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1200000>;
+		};
+
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			clock-frequency = <1300000000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc32k: oscillator-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "rtc32k";
+	};
+
+	clk26m: oscillator-0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	thermal-zones {
+			cpu_thermal: cpu-thermal {
+				polling-delay-passive = <1000>;
+				polling-delay = <1000>;
+
+				thermal-sensors = <&thermal 0>;
+
+				trips {
+					cpu_passive: cpu-passive {
+						temperature = <57000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+
+					cpu_active: cpu-active {
+						temperature = <67000>;
+						hysteresis = <2000>;
+						type = "active";
+					};
+
+					cpu_hot: cpu-hot {
+						temperature = <87000>;
+						hysteresis = <2000>;
+						type = "hot";
+					};
+
+					cpu-crit {
+						temperature = <107000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_active>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map2 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	topckgen: syscon@10000000 {
+		compatible = "mediatek,mt7623-topckgen",
+			     "mediatek,mt2701-topckgen",
+			     "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt7623-infracfg",
+			     "mediatek,mt2701-infracfg",
+			     "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible = "mediatek,mt7623-pericfg",
+			      "mediatek,mt2701-pericfg",
+			      "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pio: pinctrl@10005000 {
+		compatible = "mediatek,mt7623-pinctrl";
+		reg = <0 0x1000b000 0 0x1000>;
+		mediatek,pctl-regmap = <&syscfg_pctl_a>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	syscfg_pctl_a: syscfg@10005000 {
+		compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
+		reg = <0 0x10005000 0 0x1000>;
+	};
+
+	scpsys: power-controller@10006000 {
+		compatible = "mediatek,mt7623-scpsys",
+			     "mediatek,mt2701-scpsys",
+			     "syscon";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		infracfg = <&infracfg>;
+		clocks = <&topckgen CLK_TOP_MM_SEL>,
+			 <&topckgen CLK_TOP_MFG_SEL>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "mm", "mfg", "ethif";
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt7623-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0 0x10007000 0 0x100>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt7623-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0 0x10008000 0 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc32k>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	pwrap: pwrap@1000d000 {
+		compatible = "mediatek,mt7623-pwrap",
+			     "mediatek,mt2701-pwrap";
+		reg = <0 0x1000d000 0 0x1000>;
+		reg-names = "pwrap";
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&infracfg MT2701_INFRA_PMIC_WRAP_RST>;
+		reset-names = "pwrap";
+		clocks = <&infracfg CLK_INFRA_PMICSPI>,
+			 <&infracfg CLK_INFRA_PMICWRAP>;
+		clock-names = "spi", "wrap";
+	};
+
+	cir: cir@10013000 {
+		compatible = "mediatek,mt7623-cir";
+		reg = <0 0x10013000 0 0x1000>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_IRRX>;
+		clock-names = "clk";
+		status = "disabled";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt7623-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200100 0 0x1c>;
+	};
+
+	efuse: efuse@10206000 {
+		compatible = "mediatek,mt7623-efuse",
+			     "mediatek,mt8173-efuse";
+		reg = <0 0x10206000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		thermal_calibration_data: calib@424 {
+			reg = <0x424 0xc>;
+		};
+	};
+
+	apmixedsys: syscon@10209000 {
+		compatible = "mediatek,mt7623-apmixedsys",
+			     "mediatek,mt2701-apmixedsys",
+			     "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	rng: rng@1020f000 {
+		compatible = "mediatek,mt7623-rng";
+		reg = <0 0x1020f000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_TRNG>;
+		clock-names = "rng";
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10212000 0 0x2000>,
+		      <0 0x10214000 0 0x2000>,
+		      <0 0x10216000 0 0x2000>;
+	};
+
+	auxadc: adc@11001000 {
+		compatible = "mediatek,mt7623-auxadc",
+			     "mediatek,mt2701-auxadc";
+		reg = <0 0x11001000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "main";
+		#io-channel-cells = <1>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART0_SEL>,
+			 <&pericfg CLK_PERI_UART0>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>,
+			 <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART2_SEL>,
+			 <&pericfg CLK_PERI_UART2>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART3_SEL>,
+			 <&pericfg CLK_PERI_UART3>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	pwm: pwm@11006000 {
+		compatible = "mediatek,mt7623-pwm";
+		reg = <0 0x11006000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&topckgen CLK_TOP_PWM_SEL>,
+			 <&pericfg CLK_PERI_PWM>,
+			 <&pericfg CLK_PERI_PWM1>,
+			 <&pericfg CLK_PERI_PWM2>,
+			 <&pericfg CLK_PERI_PWM3>,
+			 <&pericfg CLK_PERI_PWM4>,
+			 <&pericfg CLK_PERI_PWM5>;
+		clock-names = "top", "main", "pwm1", "pwm2",
+			      "pwm3", "pwm4", "pwm5";
+		status = "disabled";
+	};
+
+	i2c0: i2c@11007000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11007000 0 0x70>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C0>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11008000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11008000 0 0x70>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C1>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11009000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11009000 0 0x70>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C2>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@1100a000 {
+		compatible = "mediatek,mt7623-spi",
+			     "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x1100a000 0 0x100>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI0_SEL>,
+			 <&pericfg CLK_PERI_SPI0>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	thermal: thermal@1100b000 {
+		#thermal-sensor-cells = <1>;
+		compatible = "mediatek,mt7623-thermal",
+			     "mediatek,mt2701-thermal";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "therm", "auxadc";
+		resets = <&pericfg MT2701_PERI_THERM_SW_RST>;
+		reset-names = "therm";
+		mediatek,auxadc = <&auxadc>;
+		mediatek,apmixedsys = <&apmixedsys>;
+		nvmem-cells = <&thermal_calibration_data>;
+		nvmem-cell-names = "calibration-data";
+	};
+
+	btif: serial@1100c000 {
+		compatible = "mediatek,mt7623-btif",
+			     "mediatek,mtk-btif";
+		reg = <0 0x1100c000 0 0x1000>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_BTIF>;
+		clock-names = "main";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	nandc: nfi@1100d000 {
+		compatible = "mediatek,mt7623-nfc",
+			     "mediatek,mt2701-nfc";
+		reg = <0 0x1100d000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		clocks = <&pericfg CLK_PERI_NFI>,
+			 <&pericfg CLK_PERI_NFI_PAD>;
+		clock-names = "nfi_clk", "pad_clk";
+		status = "disabled";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	bch: ecc@1100e000 {
+		compatible = "mediatek,mt7623-ecc",
+			     "mediatek,mt2701-ecc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_ECC>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
+	nor_flash: spi@11014000 {
+		compatible = "mediatek,mt7623-nor",
+			     "mediatek,mt8173-nor";
+		reg = <0 0x11014000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_FLASH>,
+			 <&topckgen CLK_TOP_FLASH_SEL>;
+		clock-names = "spi", "sf";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@11016000 {
+		compatible = "mediatek,mt7623-spi",
+			     "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11016000 0 0x100>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI1_SEL>,
+			 <&pericfg CLK_PERI_SPI1>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi2: spi@11017000 {
+		compatible = "mediatek,mt7623-spi",
+			     "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11017000 0 0x1000>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI2_SEL>,
+			 <&pericfg CLK_PERI_SPI2>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	usb0: usb@11200000 {
+		compatible = "mediatek,mt7623-musb",
+			     "mediatek,mtk-musb";
+		reg = <0 0x11200000 0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "mc";
+		phys = <&u2port2 PHY_TYPE_USB2>;
+		dr_mode = "otg";
+		clocks = <&pericfg CLK_PERI_USB0>,
+			 <&pericfg CLK_PERI_USB0_MCU>,
+			 <&pericfg CLK_PERI_USB_SLV>;
+		clock-names = "main","mcu","univpll";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		status = "disabled";
+	};
+
+	u2phy1: t-phy@11210000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x11210000 0 0x0800>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port2: usb-phy@11210800 {
+			reg = <0 0x11210800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+		};
+	};
+
+	audsys: clock-controller@11220000 {
+		compatible = "mediatek,mt7623-audsys",
+			     "mediatek,mt2701-audsys",
+			     "syscon";
+		reg = <0 0x11220000 0 0x2000>;
+		#clock-cells = <1>;
+
+		afe: audio-controller {
+			compatible = "mediatek,mt7623-audio",
+				     "mediatek,mt2701-audio";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "afe", "asys";
+			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+			clocks = <&infracfg CLK_INFRA_AUDIO>,
+				 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+				 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+				 <&topckgen CLK_TOP_AUD_48K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_44K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+				 <&audsys CLK_AUD_I2SO1>,
+				 <&audsys CLK_AUD_I2SO2>,
+				 <&audsys CLK_AUD_I2SO3>,
+				 <&audsys CLK_AUD_I2SO4>,
+				 <&audsys CLK_AUD_I2SIN1>,
+				 <&audsys CLK_AUD_I2SIN2>,
+				 <&audsys CLK_AUD_I2SIN3>,
+				 <&audsys CLK_AUD_I2SIN4>,
+				 <&audsys CLK_AUD_ASRCO1>,
+				 <&audsys CLK_AUD_ASRCO2>,
+				 <&audsys CLK_AUD_ASRCO3>,
+				 <&audsys CLK_AUD_ASRCO4>,
+				 <&audsys CLK_AUD_AFE>,
+				 <&audsys CLK_AUD_AFE_CONN>,
+				 <&audsys CLK_AUD_A1SYS>,
+				 <&audsys CLK_AUD_A2SYS>,
+				 <&audsys CLK_AUD_AFE_MRGIF>;
+
+			clock-names = "infra_sys_audio_clk",
+				      "top_audio_mux1_sel",
+				      "top_audio_mux2_sel",
+				      "top_audio_a1sys_hp",
+				      "top_audio_a2sys_hp",
+				      "i2s0_src_sel",
+				      "i2s1_src_sel",
+				      "i2s2_src_sel",
+				      "i2s3_src_sel",
+				      "i2s0_src_div",
+				      "i2s1_src_div",
+				      "i2s2_src_div",
+				      "i2s3_src_div",
+				      "i2s0_mclk_en",
+				      "i2s1_mclk_en",
+				      "i2s2_mclk_en",
+				      "i2s3_mclk_en",
+				      "i2so0_hop_ck",
+				      "i2so1_hop_ck",
+				      "i2so2_hop_ck",
+				      "i2so3_hop_ck",
+				      "i2si0_hop_ck",
+				      "i2si1_hop_ck",
+				      "i2si2_hop_ck",
+				      "i2si3_hop_ck",
+				      "asrc0_out_ck",
+				      "asrc1_out_ck",
+				      "asrc2_out_ck",
+				      "asrc3_out_ck",
+				      "audio_afe_pd",
+				      "audio_afe_conn_pd",
+				      "audio_a1sys_pd",
+				      "audio_a2sys_pd",
+				      "audio_mrgif_pd";
+
+			assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+					  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+			assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
+						 <&topckgen CLK_TOP_AUD2PLL_90M>;
+			assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+		};
+	};
+
+	mmc0: mmc@11230000 {
+		compatible = "mediatek,mt7623-mmc",
+			     "mediatek,mt2701-mmc";
+		reg = <0 0x11230000 0 0x1000>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_0>,
+			 <&topckgen CLK_TOP_MSDC30_0_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
+	mmc1: mmc@11240000 {
+		compatible = "mediatek,mt7623-mmc",
+			     "mediatek,mt2701-mmc";
+		reg = <0 0x11240000 0 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_1>,
+			 <&topckgen CLK_TOP_MSDC30_1_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
+	vdecsys: syscon@16000000 {
+		compatible = "mediatek,mt7623-vdecsys",
+			     "mediatek,mt2701-vdecsys",
+			     "syscon";
+		reg = <0 0x16000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	hifsys: syscon@1a000000 {
+		compatible = "mediatek,mt7623-hifsys",
+			     "mediatek,mt2701-hifsys",
+			     "syscon";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pcie: pcie@1a140000 {
+		compatible = "mediatek,mt7623-pcie";
+		device_type = "pci";
+		reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+		      <0 0x1a142000 0 0x1000>, /* Port0 registers */
+		      <0 0x1a143000 0 0x1000>, /* Port1 registers */
+		      <0 0x1a144000 0 0x1000>; /* Port2 registers */
+		reg-names = "subsys", "port0", "port1", "port2";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xf800 0 0 0>;
+		interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+				<0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+				<0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&hifsys CLK_HIFSYS_PCIE0>,
+			 <&hifsys CLK_HIFSYS_PCIE1>,
+			 <&hifsys CLK_HIFSYS_PCIE2>;
+		clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+		resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+		reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+		phys = <&pcie0_port PHY_TYPE_PCIE>,
+		       <&pcie1_port PHY_TYPE_PCIE>,
+		       <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		bus-range = <0x00 0xff>;
+		status = "disabled";
+		ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000
+			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			status = "disabled";
+		};
+
+		pcie@1,0 {
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			status = "disabled";
+		};
+
+		pcie@2,0 {
+			reg = <0x1000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			status = "disabled";
+		};
+	};
+
+	pcie0_phy: t-phy@1a149000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a149000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		pcie0_port: pcie-phy@1a149900 {
+			reg = <0 0x1a149900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	pcie1_phy: t-phy@1a14a000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a14a000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		pcie1_port: pcie-phy@1a14a900 {
+			reg = <0 0x1a14a900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb1: usb@1a1c0000 {
+		compatible = "mediatek,mt7623-xhci",
+			     "mediatek,mtk-xhci";
+		reg = <0 0x1a1c0000 0 0x1000>,
+		      <0 0x1a1c4700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy1: t-phy@1a1c4000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a1c4000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port0: usb-phy@1a1c4800 {
+			reg = <0 0x1a1c4800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port0: usb-phy@1a1c4900 {
+			reg = <0 0x1a1c4900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb2: usb@1a240000 {
+		compatible = "mediatek,mt7623-xhci",
+			     "mediatek,mtk-xhci";
+		reg = <0 0x1a240000 0 0x1000>,
+		      <0 0x1a244700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy2: t-phy@1a244000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a244000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port1: usb-phy@1a244800 {
+			reg = <0 0x1a244800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port1: usb-phy@1a244900 {
+			reg = <0 0x1a244900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	ethsys: syscon@1b000000 {
+		compatible = "mediatek,mt7623-ethsys",
+			     "mediatek,mt2701-ethsys",
+			     "syscon";
+		reg = <0 0x1b000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	hsdma: dma-controller@1b007000 {
+		compatible = "mediatek,mt7623-hsdma";
+		reg = <0 0x1b007000 0 0x1000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&ethsys CLK_ETHSYS_HSDMA>;
+		clock-names = "hsdma";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		#dma-cells = <1>;
+	};
+
+	eth: ethernet@1b100000 {
+		compatible = "mediatek,mt7623-eth",
+			     "mediatek,mt2701-eth",
+			     "syscon";
+		reg = <0 0x1b100000 0 0x20000>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&ethsys CLK_ETHSYS_ESW>,
+			 <&ethsys CLK_ETHSYS_GP1>,
+			 <&ethsys CLK_ETHSYS_GP2>,
+			 <&apmixedsys CLK_APMIXED_TRGPLL>;
+		clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
+		resets = <&ethsys MT2701_ETHSYS_FE_RST>,
+			 <&ethsys MT2701_ETHSYS_GMAC_RST>,
+			 <&ethsys MT2701_ETHSYS_PPE_RST>;
+		reset-names = "fe", "gmac", "ppe";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		mediatek,ethsys = <&ethsys>;
+		mediatek,pctl = <&syscfg_pctl_a>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		gmac0: mac@0 {
+			compatible = "mediatek,eth-mac";
+			reg = <0>;
+			status = "disabled";
+		};
+
+		gmac1: mac@1 {
+			compatible = "mediatek,eth-mac";
+			reg = <1>;
+			status = "disabled";
+		};
+	};
+
+	crypto: crypto@1b240000 {
+		compatible = "mediatek,eip97-crypto";
+		reg = <0 0x1b240000 0 0x20000>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&ethsys CLK_ETHSYS_CRYPTO>;
+		clock-names = "cryp";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		status = "disabled";
+	};
+
+	bdpsys: syscon@1c000000 {
+		compatible = "mediatek,mt7623-bdpsys",
+			     "mediatek,mt2701-bdpsys",
+			     "syscon";
+		reg = <0 0x1c000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+};
+
+&pio {
+	cir_pins_a:cir-default {
+		pins-cir {
+			pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
+			bias-disable;
+		};
+	};
+
+	i2c0_pins_a: i2c0-default {
+		pins-i2c0 {
+			pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
+				 <MT7623_PIN_76_SCL0_FUNC_SCL0>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_a: i2c1-default {
+		pin-i2c1 {
+			pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
+				 <MT7623_PIN_58_SCL1_FUNC_SCL1>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_b: i2c1-alt {
+		pin-i2c1 {
+			pinmux = <MT7623_PIN_242_URTS2_FUNC_SCL1>,
+				 <MT7623_PIN_243_UCTS2_FUNC_SDA1>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_a: i2c2-default {
+		pin-i2c2 {
+			pinmux = <MT7623_PIN_77_SDA2_FUNC_SDA2>,
+				 <MT7623_PIN_78_SCL2_FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_b: i2c2-alt {
+		pin-i2c2 {
+			pinmux = <MT7623_PIN_122_GPIO122_FUNC_SDA2>,
+				 <MT7623_PIN_123_HTPLG_FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
+	i2s0_pins_a: i2s0-default {
+		pin-i2s0 {
+			pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
+				 <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
+				 <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
+				 <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
+				 <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
+			drive-strength = <MTK_DRIVE_12mA>;
+			bias-pull-down;
+		};
+	};
+
+	i2s1_pins_a: i2s1-default {
+		pin-i2s1 {
+			pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
+				 <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
+				 <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
+				 <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
+				 <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
+			drive-strength = <MTK_DRIVE_12mA>;
+			bias-pull-down;
+		};
+	};
+
+	key_pins_a: keys-alt {
+		pins-keys {
+			pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
+				 <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
+			input-enable;
+		};
+	};
+
+	led_pins_a: leds-alt {
+		pins-leds {
+			pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
+				 <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
+				 <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		pins-cmd-dat {
+			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+				 <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-clk {
+			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		pins-rst {
+			pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0 {
+		pins-cmd-dat {
+			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+				 <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_2mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_2mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		pins-cmd-dat {
+			pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+				 <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+				 <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-clk {
+			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+			bias-pull-down;
+			drive-strength = <MTK_DRIVE_4mA>;
+		};
+
+		pins-wp {
+			pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-insert {
+			pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1 {
+		pins-cmd-dat {
+			pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+				 <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+				 <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-clk {
+			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	nand_pins_default: nanddefault {
+		pins-ale {
+			pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-dat {
+			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
+				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
+				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
+				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
+				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
+				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
+				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
+				 <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
+				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up;
+		};
+
+		pins-we {
+			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	pcie_default: pcie_pin_default {
+		pins_cmd_dat {
+			pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
+				 <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
+			bias-disable;
+		};
+	};
+
+	pwm_pins_a: pwm-default {
+		pins-pwm {
+			pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
+				 <MT7623_PIN_204_PWM1_FUNC_PWM1>,
+				 <MT7623_PIN_205_PWM2_FUNC_PWM2>,
+				 <MT7623_PIN_206_PWM3_FUNC_PWM3>,
+				 <MT7623_PIN_207_PWM4_FUNC_PWM4>;
+		};
+	};
+
+	spi0_pins_a: spi0-default {
+		pins-spi {
+			pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
+				<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
+				<MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
+				<MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins_a: spi1-default {
+		pins-spi {
+			pinmux = <MT7623_PIN_7_SPI1_CSN_FUNC_SPI1_CS>,
+				<MT7623_PIN_199_SPI1_CK_FUNC_SPI1_CK>,
+				<MT7623_PIN_8_SPI1_MI_FUNC_SPI1_MI>,
+				<MT7623_PIN_9_SPI1_MO_FUNC_SPI1_MO>;
+		};
+	};
+
+	spi2_pins_a: spi2-default {
+		pins-spi {
+			pinmux = <MT7623_PIN_101_SPI2_CSN_FUNC_SPI2_CS>,
+				 <MT7623_PIN_104_SPI2_CK_FUNC_SPI2_CK>,
+				 <MT7623_PIN_102_SPI2_MI_FUNC_SPI2_MI>,
+				 <MT7623_PIN_103_SPI2_MO_FUNC_SPI2_MO>;
+		};
+	};
+
+	uart0_pins_a: uart0-default {
+		pins-dat {
+			pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
+				 <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins_a: uart1-default {
+		pins-dat {
+			pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+				 <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+		};
+	};
+
+	uart2_pins_a: uart2-default {
+		pins-dat {
+			pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,
+				 <MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
+		};
+	};
+
+	uart2_pins_b: uart2-alt {
+		pins-dat {
+			pinmux = <MT7623_PIN_200_URXD2_FUNC_URXD2>,
+				 <MT7623_PIN_201_UTXD2_FUNC_UTXD2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dts
new file mode 100644
index 0000000000000..5654284bab018
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dts
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623a.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+	model = "MediaTek MT7623A with eMMC reference board";
+	compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@2 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@3 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		button-factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x20000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "mediatek,mt2701-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing =
+			"Headphone", "HP_L",
+			"Headphone", "HP_R",
+			"LINPUT1", "AMIC",
+			"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_pins_a>;
+	};
+};
+
+&btif {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "lan0";
+		};
+
+		port@1 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port@2 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		port@3 {
+			status = "okay";
+			label = "lan3";
+		};
+
+		port@4 {
+			status = "okay";
+			label = "wan";
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_b>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins_a>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mediatek/mt7623a-rfb-nand.dts
new file mode 100644
index 0000000000000..afd177b3b5165
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623a-rfb-nand.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623a.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+	model = "MediaTek MT7623A with NAND reference board";
+	compatible = "mediatek,mt7623a-rfb-nand", "mediatek,mt7623";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@2 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@3 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		button-factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x20000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "mediatek,mt2701-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing =
+			"Headphone", "HP_L",
+			"Headphone", "HP_R",
+			"LINPUT1", "AMIC",
+			"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_pins_a>;
+	};
+};
+
+&bch {
+	status = "okay";
+};
+
+&btif {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "lan0";
+		};
+
+		port@1 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port@2 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		port@3 {
+			status = "okay";
+			label = "lan3";
+		};
+
+		port@4 {
+			status = "okay";
+			label = "wan";
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_b>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&nandc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_default>;
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		spare_per_sector = <64>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <12>;
+		nand-ecc-step-size = <1024>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "preloader";
+				reg = <0x0 0x40000>;
+			};
+
+			partition@40000 {
+				label = "uboot";
+				reg = <0x40000 0x80000>;
+			};
+
+			partition@c0000 {
+				label = "uboot-env";
+				reg = <0xC0000 0x40000>;
+			};
+
+			partition@140000 {
+				label = "bootimg";
+				reg = <0x140000 0x2000000>;
+			};
+
+			partition@2140000 {
+				label = "recovery";
+				reg = <0x2140000 0x2000000>;
+			};
+
+			partition@4140000 {
+				label = "rootfs";
+				reg = <0x4140000 0x1000000>;
+			};
+
+			partition@5140000 {
+				label = "usrdata";
+				reg = <0x5140000 0x1000000>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins_a>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7623a.dtsi b/arch/arm/boot/dts/mediatek/mt7623a.dtsi
new file mode 100644
index 0000000000000..bcf909d58a1cc
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623a.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/power/mt7623a-power.h>
+#include "mt7623.dtsi"
+
+&afe {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&crypto {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "trgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&eth {
+	status = "okay";
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0: switch@1f {
+			compatible = "mediatek,mt7530";
+			reg = <0x1f>;
+			mediatek,mcm;
+			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+			reset-names = "mcm";
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					status = "disabled";
+					reg = <0>;
+					label = "swp0";
+				};
+
+				port@1 {
+					status = "disabled";
+					reg = <1>;
+					label = "swp1";
+				};
+
+				port@2 {
+					status = "disabled";
+					reg = <2>;
+					label = "swp2";
+				};
+
+				port@3 {
+					status = "disabled";
+					reg = <3>;
+					label = "swp3";
+				};
+
+				port@4 {
+					status = "disabled";
+					reg = <4>;
+					label = "swp4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&nandc {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&pcie {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
+
+&scpsys {
+	compatible = "mediatek,mt7623a-scpsys";
+	clocks = <&topckgen CLK_TOP_ETHIF_SEL>;
+	clock-names = "ethif";
+};
+
+&usb0 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&usb1 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
+
+&usb2 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts
new file mode 100644
index 0000000000000..a37f3fa223c72
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts
@@ -0,0 +1,471 @@
+/*
+ * Copyright 2017-2018 Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623n.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+	model = "Bananapi BPI-R2";
+	compatible = "bananapi,bpi-r2", "mediatek,mt7623";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+		ddc-i2c-bus = <&hdmiddc0>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@2 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@3 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_vgpu: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_vgpu";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		button-factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a>;
+
+		blue {
+			label = "bpi-r2:pio:blue";
+			gpios = <&pio 240 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		green {
+			label = "bpi-r2:pio:green";
+			gpios = <&pio 241 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		red {
+			label = "bpi-r2:pio:red";
+			gpios = <&pio 239 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x80000000>;
+	};
+};
+
+&bls {
+	status = "okay";
+};
+
+&btif {
+	status = "okay";
+};
+
+&cec {
+	status = "okay";
+};
+
+&cir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cir_pins_a>;
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpi0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&hdmi0_in>;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "trgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@1f {
+			compatible = "mediatek,mt7530";
+			reg = <0x1f>;
+			reset-gpios = <&pio 33 0>;
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "wan";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan0";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan1";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan2";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "lan3";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&hdmi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins_a>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			hdmi0_in: endpoint {
+				remote-endpoint = <&dpi0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmiddc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_ddc_pins_a>;
+	status = "okay";
+};
+
+&hdmi_phy {
+	mediatek,ibias = <0xa>;
+	mediatek,ibias_up = <0x1c>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&mali {
+	mali-supply = <&reg_vgpu>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&mt6323keys {
+	home {
+		status = "disabled";
+	};
+};
+
+&mt6323_leds {
+	status = "okay";
+
+	led@0 {
+		reg = <0>;
+		label = "bpi-r2:isink:green";
+		default-state = "off";
+	};
+
+	led@1 {
+		reg = <1>;
+		label = "bpi-r2:isink:red";
+		default-state = "off";
+	};
+
+	led@2 {
+		reg = <2>;
+		label = "bpi-r2:isink:blue";
+		default-state = "off";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pio {
+	musb_pins: musb {
+		pins-musb {
+			pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>;
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins_a>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&musb_pins>;
+	status = "okay";
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usb1 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usb2 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mediatek/mt7623n-rfb-emmc.dts
new file mode 100644
index 0000000000000..34994f3f5a4b2
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623n-rfb-emmc.dts
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623n.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+	model = "MediaTek MT7623N with eMMC reference board";
+	compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+		ddc-i2c-bus = <&hdmiddc0>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@2 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@3 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		button-factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "mediatek,mt2701-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing =
+			"Headphone", "HP_L",
+			"Headphone", "HP_R",
+			"LINPUT1", "AMIC",
+			"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_pins_a>;
+	};
+};
+
+&bls {
+	status = "okay";
+};
+
+&btif {
+	status = "okay";
+};
+
+&cec {
+	status = "okay";
+};
+
+&cir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cir_pins_a>;
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpi0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&hdmi0_in>;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "trgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy5>;
+};
+
+&eth {
+	status = "okay";
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii-rxid";
+		};
+
+		switch@1f {
+			compatible = "mediatek,mt7530";
+			reg = <0x1f>;
+			reset-gpios = <&pio 33 0>;
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "wan";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&hdmi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins_a>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			hdmi0_in: endpoint {
+				remote-endpoint = <&dpi0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmiddc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_ddc_pins_a>;
+	status = "okay";
+};
+
+&hdmi_phy {
+	mediatek,ibias = <0xa>;
+	mediatek,ibias_up = <0x1c>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins_a>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7623n.dtsi b/arch/arm/boot/dts/mediatek/mt7623n.dtsi
new file mode 100644
index 0000000000000..3adab5cd1fef7
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623n.dtsi
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright © 2017-2020 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *	   Ryder Lee <ryder.lee@mediatek.com>
+ *
+ */
+
+#include "mt7623.dtsi"
+#include <dt-bindings/memory/mt2701-larb-port.h>
+
+/ {
+	aliases {
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
+	g3dsys: syscon@13000000 {
+		compatible = "mediatek,mt7623-g3dsys",
+			     "mediatek,mt2701-g3dsys",
+			     "syscon";
+		reg = <0 0x13000000 0 0x200>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	mali: gpu@13040000 {
+		compatible = "mediatek,mt7623-mali", "arm,mali-450";
+		reg = <0 0x13040000 0 0x30000>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1",
+				  "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3",
+				  "pp";
+		clocks = <&topckgen CLK_TOP_MMPLL>,
+			 <&g3dsys CLK_G3DSYS_CORE>;
+		clock-names = "bus", "core";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
+		resets = <&g3dsys MT2701_G3DSYS_CORE_RST>;
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt7623-mmsys",
+			     "mediatek,mt2701-mmsys",
+			     "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb0: larb@14010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x14010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <0>;
+		clocks = <&mmsys CLK_MM_SMI_LARB0>,
+			 <&mmsys CLK_MM_SMI_LARB0>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	larb1: larb@16010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <1>;
+		clocks = <&vdecsys CLK_VDEC_CKGEN>,
+			 <&vdecsys CLK_VDEC_LARB>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+	};
+
+	larb2: larb@15001000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x15001000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <2>;
+		clocks = <&imgsys CLK_IMG_SMI_COMM>,
+			 <&imgsys CLK_IMG_SMI_COMM>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+	};
+
+	imgsys: syscon@15000000 {
+		compatible = "mediatek,mt7623-imgsys",
+			     "mediatek,mt2701-imgsys",
+			     "syscon";
+		reg = <0 0x15000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	iommu: mmsys_iommu@10205000 {
+		compatible = "mediatek,mt7623-m4u",
+			     "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb0 &larb1 &larb2>;
+		#iommu-cells = <1>;
+	};
+
+	jpegdec: jpegdec@15004000 {
+		compatible = "mediatek,mt7623-jpgdec",
+			     "mediatek,mt2701-jpgdec";
+		reg = <0 0x15004000 0 0x1000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+			  <&imgsys CLK_IMG_JPGDEC>;
+		clock-names = "jpgdec-smi",
+			      "jpgdec";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+	};
+
+	smi_common: smi@1000c000 {
+		compatible = "mediatek,mt7623-smi-common",
+			     "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	ovl: ovl@14007000 {
+		compatible = "mediatek,mt7623-disp-ovl",
+			     "mediatek,mt2701-disp-ovl";
+		reg = <0 0x14007000 0 0x1000>;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_OVL>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+	};
+
+	rdma0: rdma@14008000 {
+		compatible = "mediatek,mt7623-disp-rdma",
+			     "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14008000 0 0x1000>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+	};
+
+	wdma@14009000 {
+		compatible = "mediatek,mt7623-disp-wdma",
+			     "mediatek,mt2701-disp-wdma";
+		reg = <0 0x14009000 0 0x1000>;
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_WDMA>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
+	};
+
+	bls: pwm@1400a000 {
+		compatible = "mediatek,mt7623-disp-pwm",
+			     "mediatek,mt2701-disp-pwm";
+		reg = <0 0x1400a000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
+			 <&mmsys CLK_MM_DISP_BLS>;
+		clock-names = "main", "mm";
+		status = "disabled";
+	};
+
+	color: color@1400b000 {
+		compatible = "mediatek,mt7623-disp-color",
+			     "mediatek,mt2701-disp-color";
+		reg = <0 0x1400b000 0 0x1000>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_COLOR>;
+	};
+
+	dsi: dsi@1400c000 {
+		compatible = "mediatek,mt7623-dsi",
+			     "mediatek,mt2701-dsi";
+		reg = <0 0x1400c000 0 0x1000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+			 <&mmsys CLK_MM_DSI_DIG>,
+			 <&mipi_tx0>;
+		clock-names = "engine", "digital", "hs";
+		phys = <&mipi_tx0>;
+		phy-names = "dphy";
+		status = "disabled";
+	};
+
+	mutex: mutex@1400e000 {
+		compatible = "mediatek,mt7623-disp-mutex",
+			     "mediatek,mt2701-disp-mutex";
+		reg = <0 0x1400e000 0 0x1000>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_MUTEX_32K>;
+	};
+
+	rdma1: rdma@14012000 {
+		compatible = "mediatek,mt7623-disp-rdma",
+			     "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14012000 0 0x1000>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+	};
+
+	dpi0: dpi@14014000 {
+		compatible = "mediatek,mt7623-dpi",
+			     "mediatek,mt2701-dpi";
+		reg = <0 0x14014000 0 0x1000>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DPI1_DIGL>,
+			 <&mmsys CLK_MM_DPI1_ENGINE>,
+			 <&apmixedsys CLK_APMIXED_TVDPLL>;
+		clock-names = "pixel", "engine", "pll";
+		status = "disabled";
+	};
+
+	hdmi0: hdmi@14015000 {
+		compatible = "mediatek,mt7623-hdmi",
+			     "mediatek,mt2701-hdmi";
+		reg = <0 0x14015000 0 0x400>;
+		clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+			 <&mmsys CLK_MM_HDMI_PLL>,
+			 <&mmsys CLK_MM_HDMI_AUDIO>,
+			 <&mmsys CLK_MM_HDMI_SPDIF>;
+		clock-names = "pixel", "pll", "bclk", "spdif";
+		phys = <&hdmi_phy>;
+		phy-names = "hdmi";
+		mediatek,syscon-hdmi = <&mmsys 0x900>;
+		cec = <&cec>;
+		status = "disabled";
+	};
+
+	mipi_tx0: dsi-phy@10010000 {
+		compatible = "mediatek,mt7623-mipi-tx",
+			     "mediatek,mt2701-mipi-tx";
+		reg = <0 0x10010000 0 0x90>;
+		clocks = <&clk26m>;
+		clock-output-names = "mipi_tx0_pll";
+		#clock-cells = <0>;
+		#phy-cells = <0>;
+	};
+
+	cec: cec@10012000 {
+		compatible = "mediatek,mt7623-cec",
+			     "mediatek,mt8173-cec";
+		reg = <0 0x10012000 0 0xbc>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_CEC>;
+		status = "disabled";
+	};
+
+	hdmi_phy: hdmi-phy@10209100 {
+		compatible = "mediatek,mt7623-hdmi-phy",
+			     "mediatek,mt2701-hdmi-phy";
+		reg = <0 0x10209100 0 0x24>;
+		clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+		clock-names = "pll_ref";
+		clock-output-names = "hdmitx_dig_cts";
+		#clock-cells = <0>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
+	hdmiddc0: i2c@11013000 {
+		compatible = "mediatek,mt7623-hdmi-ddc",
+			     "mediatek,mt8173-hdmi-ddc";
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0 0x11013000 0 0x1C>;
+		clocks = <&pericfg CLK_PERI_I2C3>;
+		clock-names = "ddc-i2c";
+		status = "disabled";
+	};
+};
+
+&pio {
+	hdmi_pins_a: hdmi-default {
+		pins-hdmi {
+			pinmux = <MT7623_PIN_123_HTPLG_FUNC_HTPLG>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	hdmi_ddc_pins_a: hdmi_ddc-default {
+		pins-hdmi-ddc {
+			pinmux = <MT7623_PIN_124_GPIO124_FUNC_HDMISCK>,
+				 <MT7623_PIN_125_GPIO125_FUNC_HDMISD>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7629-rfb.dts b/arch/arm/boot/dts/mediatek/mt7629-rfb.dts
new file mode 100644
index 0000000000000..84e14bee7235f
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7629-rfb.dts
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7629.dtsi"
+
+/ {
+	model = "MediaTek MT7629 reference board";
+	compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "factory";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 58 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&eth {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-1 = <&ephy_leds_pins>;
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "gmii";
+		phy-handle = <&phy0>;
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000 0x60000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "u-boot-env";
+				reg = <0x60000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@70000 {
+				label = "factory";
+				reg = <0x70000 0x40000>;
+				read-only;
+			};
+
+			partition@b0000 {
+				label = "kernel";
+				reg = <0xb0000 0xb50000>;
+			};
+		};
+	};
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pciephy1 {
+	status = "okay";
+};
+
+&pio {
+	eth_pins: eth-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio";
+		};
+	};
+
+	ephy_leds_pins: ephy-leds-pins {
+		mux {
+			function = "led";
+			groups = "gphy_leds_0", "ephy_leds";
+		};
+	};
+
+	i2c_pins: i2c-pins {
+		mux {
+			function = "i2c";
+			groups =  "i2c_0";
+		};
+
+		conf {
+			pins = "I2C_SDA", "I2C_SCL";
+			drive-strength = <4>;
+			bias-disable;
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clkreq",
+				 "pcie_pereset",
+				 "pcie_wake";
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm_0";
+		};
+	};
+
+	/* SPI-NOR is shared pin with serial NAND */
+	qspi_pins: qspi-pins {
+		mux {
+			function = "flash";
+			groups = "spi_nor";
+		};
+	};
+
+	/* Serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	spi_pins: spi-pins {
+		mux {
+			function = "spi";
+			groups = "spi_0";
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		mux {
+			function = "uart";
+			groups = "uart0_txd_rxd" ;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1_0_tx_rx" ;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_0_txd_rxd" ;
+		};
+	};
+
+	watchdog_pins: watchdog-pins {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins>;
+	status = "okay";
+};
+
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7629.dtsi b/arch/arm/boot/dts/mediatek/mt7629.dtsi
new file mode 100644
index 0000000000000..acab0883a3bbf
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7629.dtsi
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ *
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7629-clk.h>
+#include <dt-bindings/power/mt7622-power.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/mt7629-resets.h>
+
+/ {
+	compatible = "mediatek,mt7629";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clock-frequency = <1250000000>;
+			cci-control-port = <&cci_control2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clock-frequency = <1250000000>;
+			cci-control-port = <&cci_control2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	clk20m: oscillator-0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+		clock-output-names = "clk20m";
+	};
+
+	clk40m: oscillator-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <20000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		infracfg: syscon@10000000 {
+			compatible = "mediatek,mt7629-infracfg", "syscon";
+			reg = <0x10000000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10002000 {
+			compatible = "mediatek,mt7629-pericfg", "syscon";
+			reg = <0x10002000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		scpsys: power-controller@10006000 {
+			compatible = "mediatek,mt7629-scpsys",
+				     "mediatek,mt7622-scpsys";
+			#power-domain-cells = <1>;
+			reg = <0x10006000 0x1000>;
+			clocks = <&topckgen CLK_TOP_HIF_SEL>;
+			clock-names = "hif_sel";
+			assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			infracfg = <&infracfg>;
+		};
+
+		timer: timer@10009000 {
+			compatible = "mediatek,mt7629-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0x10009000 0x60>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk20m>;
+			clock-names = "clk20m";
+		};
+
+		sysirq: interrupt-controller@10200a80 {
+			compatible = "mediatek,mt7629-sysirq",
+				     "mediatek,mt6577-sysirq";
+			reg = <0x10200a80 0x20>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		apmixedsys: syscon@10209000 {
+			compatible = "mediatek,mt7629-apmixedsys", "syscon";
+			reg = <0x10209000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rng: rng@1020f000 {
+			compatible = "mediatek,mt7629-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0x1020f000 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_PD>;
+			clock-names = "rng";
+		};
+
+		topckgen: syscon@10210000 {
+			compatible = "mediatek,mt7629-topckgen", "syscon";
+			reg = <0x10210000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@10212000 {
+			compatible = "mediatek,mt7629-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0x10212000 0x100>;
+		};
+
+		pio: pinctrl@10217000 {
+			compatible = "mediatek,mt7629-pinctrl";
+			reg = <0x10217000 0x8000>,
+			      <0x10005000 0x1000>;
+			reg-names = "base", "eint";
+			gpio-controller;
+			gpio-ranges = <&pio 0 0 79>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+		};
+
+		gic: interrupt-controller@10300000 {
+			compatible = "arm,gic-400";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0x10310000 0x1000>,
+			      <0x10320000 0x1000>,
+			      <0x10340000 0x2000>,
+			      <0x10360000 0x2000>;
+		};
+
+		cci: cci@10390000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10390000 0x1000>;
+			ranges = <0 0x10390000 0x10000>;
+
+			cci_control0: slave-if@1000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace-lite";
+				reg = <0x1000 0x1000>;
+			};
+
+			cci_control1: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control2: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7629-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0x11002000 0x400>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&pericfg CLK_PERI_UART0_PD>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7629-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0x11003000 0x400>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&pericfg CLK_PERI_UART1_PD>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7629-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0x11004000 0x400>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&pericfg CLK_PERI_UART2_PD>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		pwm: pwm@11006000 {
+			compatible = "mediatek,mt7629-pwm";
+			reg = <0x11006000 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&pericfg CLK_PERI_PWM_PD>,
+				 <&pericfg CLK_PERI_PWM1_PD>;
+			clock-names = "top", "main", "pwm1";
+			assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>;
+			assigned-clock-parents =
+					<&topckgen CLK_TOP_UNIVPLL2_D4>;
+			status = "disabled";
+		};
+
+		i2c: i2c@11007000 {
+			compatible = "mediatek,mt7629-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0x11007000 0x90>,
+			      <0x11000100 0x80>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <4>;
+			clocks = <&pericfg CLK_PERI_I2C0_PD>,
+				 <&pericfg CLK_PERI_AP_DMA_PD>;
+			clock-names = "main", "dma";
+			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100a000 {
+			compatible = "mediatek,mt7629-spi",
+				     "mediatek,mt7622-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1100a000 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+				 <&topckgen CLK_TOP_SPI0_SEL>,
+				 <&pericfg CLK_PERI_SPI0_PD>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		qspi: spi@11014000 {
+			compatible = "mediatek,mt7629-nor",
+				     "mediatek,mt8173-nor";
+			reg = <0x11014000 0xe0>;
+			clocks = <&pericfg CLK_PERI_FLASH_PD>,
+				 <&topckgen CLK_TOP_FLASH_SEL>;
+			clock-names = "spi", "sf";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssusbsys: syscon@1a000000 {
+			compatible = "mediatek,mt7629-ssusbsys", "syscon";
+			reg = <0x1a000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ssusb: usb@1a0c0000 {
+			compatible = "mediatek,mt7629-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0x1a0c0000 0x01000>,
+			      <0x1a0c3e00 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+				 <&ssusbsys CLK_SSUSB_REF_EN>,
+				 <&ssusbsys CLK_SSUSB_MCU_EN>,
+				 <&ssusbsys CLK_SSUSB_DMA_EN>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
+					  <&topckgen CLK_TOP_SATA_SEL>,
+					  <&topckgen CLK_TOP_HIF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
+						 <&topckgen CLK_TOP_UNIVPLL2_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			status = "disabled";
+		};
+
+		u3phy0: t-phy@1a0c4000 {
+			compatible = "mediatek,mt7629-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1a0c4000 0xe00>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0 0x700>;
+				clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&clk20m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		pciesys: syscon@1a100800 {
+			compatible = "mediatek,mt7629-pciesys", "syscon";
+			reg = <0x1a100800 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pciecfg: pciecfg@1a140000 {
+			compatible = "mediatek,generic-pciecfg", "syscon";
+			reg = <0x1a140000 0x1000>;
+		};
+
+		pcie1: pcie@1a145000 {
+			compatible = "mediatek,mt7629-pcie";
+			device_type = "pci";
+			reg = <0x1a145000 0x1000>;
+			reg-names = "port1";
+			linux,pci-domain = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "pcie_irq";
+			clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+				 <&pciesys CLK_PCIE_P0_AHB_EN>,
+				 <&pciesys CLK_PCIE_P1_AUX_EN>,
+				 <&pciesys CLK_PCIE_P1_AXI_EN>,
+				 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+				 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+			clock-names = "sys_ck1", "ahb_ck1",
+				      "aux_ck1", "axi_ck1",
+				      "obff_ck1", "pipe_ck1";
+			assigned-clocks = <&topckgen CLK_TOP_SATA_SEL>,
+					  <&topckgen CLK_TOP_AXI_SEL>,
+					  <&topckgen CLK_TOP_HIF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+						 <&topckgen CLK_TOP_SYSPLL1_D2>,
+						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			phys = <&pcieport1 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy1";
+			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pciephy1: t-phy@1a14a000 {
+			compatible = "mediatek,mt7629-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1a14a000 0x1000>;
+			status = "disabled";
+
+			pcieport1: pcie-phy@0 {
+				reg = <0 0x1000>;
+				clocks = <&clk20m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		ethsys: syscon@1b000000 {
+			compatible = "mediatek,mt7629-ethsys", "syscon";
+			reg = <0x1b000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		eth: ethernet@1b100000 {
+			compatible = "mediatek,mt7629-eth","syscon";
+			reg = <0x1b100000 0x20000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_ETH_SEL>,
+				 <&topckgen CLK_TOP_F10M_REF_SEL>,
+				 <&ethsys CLK_ETH_ESW_EN>,
+				 <&ethsys CLK_ETH_GP0_EN>,
+				 <&ethsys CLK_ETH_GP1_EN>,
+				 <&ethsys CLK_ETH_GP2_EN>,
+				 <&ethsys CLK_ETH_FE_EN>,
+				 <&sgmiisys0 CLK_SGMII_TX_EN>,
+				 <&sgmiisys0 CLK_SGMII_RX_EN>,
+				 <&sgmiisys0 CLK_SGMII_CDR_REF>,
+				 <&sgmiisys0 CLK_SGMII_CDR_FB>,
+				 <&sgmiisys1 CLK_SGMII_TX_EN>,
+				 <&sgmiisys1 CLK_SGMII_RX_EN>,
+				 <&sgmiisys1 CLK_SGMII_CDR_REF>,
+				 <&sgmiisys1 CLK_SGMII_CDR_FB>,
+				 <&apmixedsys CLK_APMIXED_SGMIPLL>,
+				 <&apmixedsys CLK_APMIXED_ETH2PLL>;
+			clock-names = "ethif", "sgmiitop", "esw", "gp0", "gp1",
+				      "gp2", "fe", "sgmii_tx250m", "sgmii_rx250m",
+				      "sgmii_cdr_ref", "sgmii_cdr_fb",
+				      "sgmii2_tx250m", "sgmii2_rx250m",
+				      "sgmii2_cdr_ref", "sgmii2_cdr_fb",
+				      "sgmii_ck", "eth2pll";
+			assigned-clocks = <&topckgen CLK_TOP_ETH_SEL>,
+					  <&topckgen CLK_TOP_F10M_REF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>,
+						 <&topckgen CLK_TOP_SGMIIPLL_D2>;
+			power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+			mediatek,ethsys = <&ethsys>;
+			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
+			mediatek,infracfg = <&infracfg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sgmiisys0: syscon@1b128000 {
+			compatible = "mediatek,mt7629-sgmiisys", "syscon";
+			reg = <0x1b128000 0x3000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@1b130000 {
+			compatible = "mediatek,mt7629-sgmiisys", "syscon";
+			reg = <0x1b130000 0x3000>;
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt8127-moose.dts b/arch/arm/boot/dts/mediatek/mt8127-moose.dts
new file mode 100644
index 0000000000000..560687af87dc5
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt8127-moose.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt8127.dtsi"
+
+/ {
+	model = "MediaTek MT8127 Moose Board";
+	compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt8127.dtsi b/arch/arm/boot/dts/mediatek/mt8127.dtsi
new file mode 100644
index 0000000000000..aced173c2a52e
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt8127.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "mediatek,mt8127";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt81xx-tz-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		trustzone-bootinfo@80002000 {
+			compatible = "mediatek,trustzone-bootinfo";
+			reg = <0 0x80002000 0 0x1000>;
+		};
+	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		system_clk: dummy13m {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		rtc_clk: dummy32k {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		uart_clk: dummy26m {
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+			#clock-cells = <0>;
+                };
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8127-timer",
+					"mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x80>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt8127-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200100 0 0x1c>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10211000 0 0x1000>,
+			      <0 0x10212000 0 0x2000>,
+			      <0 0x10214000 0 0x2000>,
+			      <0 0x10216000 0 0x2000>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart3: serial@11005000 {
+			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt8135-evbp1.dts b/arch/arm/boot/dts/mediatek/mt8135-evbp1.dts
new file mode 100644
index 0000000000000..f6147fe62f415
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt8135-evbp1.dts
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt8135.dtsi"
+
+/ {
+	model = "MediaTek MT8135 evaluation board";
+	compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&pwrap {
+	pmic: mt6397 {
+		compatible = "mediatek,mt6397";
+
+		mt6397regulator: mt6397regulator {
+			compatible = "mediatek,mt6397-regulator";
+
+			mt6397_vpca15_reg: buck_vpca15 {
+				regulator-name = "vpca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vpca7_reg: buck_vpca7 {
+				regulator-name = "vpca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca15_reg: buck_vsramca15 {
+				regulator-name = "vsramca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca7_reg: buck_vsramca7 {
+				regulator-name = "vsramca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vcore_reg: buck_vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vgpu_reg: buck_vgpu {
+				regulator-name = "vgpu";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vdrm_reg: buck_vdrm {
+				regulator-name = "vdrm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vio18_reg: buck_vio18 {
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vtcxo_reg: ldo_vtcxo {
+				regulator-name = "vtcxo";
+				regulator-always-on;
+			};
+
+			mt6397_va28_reg: ldo_va28 {
+				regulator-name = "va28";
+				regulator-always-on;
+			};
+
+			mt6397_vcama_reg: ldo_vcama {
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vio28_reg: ldo_vio28 {
+				regulator-name = "vio28";
+				regulator-always-on;
+			};
+
+			mt6397_vusb_reg: ldo_vusb {
+				regulator-name = "vusb";
+			};
+
+			mt6397_vmc_reg: ldo_vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmch_reg: ldo_vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+				regulator-name = "vemc_3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp1_reg: ldo_vgp1 {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1220000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_vgp2_reg: ldo_vgp2 {
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp3_reg: ldo_vgp3 {
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp4_reg: ldo_vgp4 {
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp5_reg: ldo_vgp5 {
+				regulator-name = "vgp5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp6_reg: ldo_vgp6 {
+				regulator-name = "vgp6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vibr_reg: ldo_vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+		};
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt8135.dtsi b/arch/arm/boot/dts/mediatek/mt8135.dtsi
new file mode 100644
index 0000000000000..0f291ad22d3af
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt8135.dtsi
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/clock/mt8135-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/mt8135-resets.h>
+#include <dt-bindings/pinctrl/mt8135-pinfunc.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "mediatek,mt8135";
+	interrupt-parent = <&sysirq>;
+
+	cpu-map {
+		cluster0 {
+			core0 {
+				cpu = <&cpu0>;
+			};
+			core1 {
+				cpu = <&cpu1>;
+			};
+		};
+
+		cluster1 {
+			core0 {
+				cpu = <&cpu2>;
+			};
+			core1 {
+				cpu = <&cpu3>;
+			};
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt81xx-tz-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x001>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		trustzone-bootinfo@80002000 {
+			compatible = "mediatek,trustzone-bootinfo";
+			reg = <0 0x80002000 0 0x1000>;
+		};
+	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		system_clk: dummy13m {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		rtc_clk: dummy32k {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		clk26m: clk26m {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		topckgen: topckgen@10000000 {
+			compatible = "mediatek,mt8135-topckgen";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001000 {
+			#reset-cells = <1>;
+			#clock-cells = <1>;
+			compatible = "mediatek,mt8135-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+		};
+
+		pericfg: pericfg@10003000 {
+			#reset-cells = <1>;
+			#clock-cells = <1>;
+			compatible = "mediatek,mt8135-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+		};
+
+		/*
+		 * Pinctrl access register at 0x10005000 and 0x1020c000 through
+		 * regmap. Register 0x1000b000 is used by EINT.
+		 */
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8135-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscfg_pctl_a: syscfg_pctl_a@10005000 {
+			compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8135-timer",
+					"mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x80>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		pwrap: pwrap@1000f000 {
+			compatible = "mediatek,mt8135-pwrap";
+			reg = <0 0x1000f000 0 0x1000>,
+				<0 0x11017000 0 0x1000>;
+			reg-names = "pwrap", "pwrap-bridge";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+					<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+			reset-names = "pwrap", "pwrap-bridge";
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "spi", "wrap";
+		};
+
+		sysirq: interrupt-controller@10200030 {
+			compatible = "mediatek,mt8135-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200030 0 0x1c>;
+		};
+
+		apmixedsys: apmixedsys@10209000 {
+			compatible = "mediatek,mt8135-apmixedsys";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		syscfg_pctl_b: syscfg_pctl_b@1020c000 {
+			compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
+			reg = <0 0x1020c000 0 0x1000>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a15-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10211000 0 0x1000>,
+			      <0 0x10212000 0 0x2000>,
+			      <0 0x10214000 0 0x2000>,
+			      <0 0x10216000 0 0x2000>;
+		};
+
+		uart0: serial@11006000 {
+			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+			reg = <0 0x11006000 0 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11007000 {
+			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+			reg = <0 0x11007000 0 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11008000 {
+			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+			reg = <0 0x11008000 0 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart3: serial@11009000 {
+			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+			reg = <0 0x11009000 0 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
deleted file mode 100644
index 8e3860d5d9160..0000000000000
--- a/arch/arm/boot/dts/meson.dtsi
+++ /dev/null
@@ -1,334 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&saradc 8>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		cbus: cbus@c1100000 {
-			compatible = "simple-bus";
-			reg = <0xc1100000 0x200000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc1100000 0x200000>;
-
-			hhi: system-controller@4000 {
-				compatible = "amlogic,meson-hhi-sysctrl",
-					     "simple-mfd",
-					     "syscon";
-				reg = <0x4000 0x400>;
-			};
-
-			aiu: audio-controller@5400 {
-				compatible = "amlogic,aiu";
-				#sound-dai-cells = <2>;
-				sound-name-prefix = "AIU";
-				reg = <0x5400 0x2ac>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
-					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
-				interrupt-names = "i2s", "spdif";
-				status = "disabled";
-			};
-
-			assist: assist@7c00 {
-				compatible = "amlogic,meson-mx-assist", "syscon";
-				reg = <0x7c00 0x200>;
-			};
-
-			hwrng: rng@8100 {
-				compatible = "amlogic,meson-rng";
-				reg = <0x8100 0x8>;
-			};
-
-			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart";
-				reg = <0x84c0 0x18>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
-				fifo-size = <128>;
-				status = "disabled";
-			};
-
-			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart";
-				reg = <0x84dc 0x18>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			i2c_A: i2c@8500 {
-				compatible = "amlogic,meson6-i2c";
-				reg = <0x8500 0x20>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			pwm_ab: pwm@8550 {
-				compatible = "amlogic,meson-pwm";
-				reg = <0x8550 0x10>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm_cd: pwm@8650 {
-				compatible = "amlogic,meson-pwm";
-				reg = <0x8650 0x10>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			saradc: adc@8680 {
-				compatible = "amlogic,meson-saradc";
-				reg = <0x8680 0x34>;
-				#io-channel-cells = <1>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart";
-				reg = <0x8700 0x18>;
-				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			i2c_B: i2c@87c0 {
-				compatible = "amlogic,meson6-i2c";
-				reg = <0x87c0 0x20>;
-				interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			usb0_phy: phy@8800 {
-				compatible = "amlogic,meson-mx-usb2-phy";
-				#phy-cells = <0>;
-				reg = <0x8800 0x20>;
-				status = "disabled";
-			};
-
-			usb1_phy: phy@8820 {
-				compatible = "amlogic,meson-mx-usb2-phy";
-				#phy-cells = <0>;
-				reg = <0x8820 0x20>;
-				status = "disabled";
-			};
-
-			sdio: mmc@8c20 {
-				compatible = "amlogic,meson-mx-sdio";
-				reg = <0x8c20 0x20>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			spifc: spi@8c80 {
-				compatible = "amlogic,meson6-spifc";
-				reg = <0x8c80 0x80>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			sdhc: mmc@8e00 {
-				compatible = "amlogic,meson-mx-sdhc";
-				reg = <0x8e00 0x42>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			gpio_intc: interrupt-controller@9880 {
-				compatible = "amlogic,meson-gpio-intc";
-				reg = <0x9880 0x10>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
-				status = "disabled";
-			};
-
-			wdt: watchdog@9900 {
-				compatible = "amlogic,meson6-wdt";
-				reg = <0x9900 0x8>;
-				interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
-			};
-
-			timer_abcde: timer@9940 {
-				compatible = "amlogic,meson6-timer";
-				reg = <0x9940 0x18>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
-					     <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
-					     <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
-					     <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
-			};
-		};
-
-		L2: cache-controller@c4200000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xc4200000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		periph: bus@c4300000 {
-			compatible = "simple-bus";
-			reg = <0xc4300000 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc4300000 0x10000>;
-
-			gic: interrupt-controller@1000 {
-				compatible = "arm,cortex-a9-gic";
-				reg = <0x1000 0x1000>,
-				      <0x100 0x100>;
-				interrupt-controller;
-				#interrupt-cells = <3>;
-			};
-		};
-
-		aobus: aobus@c8100000 {
-			compatible = "simple-bus";
-			reg = <0xc8100000 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc8100000 0x100000>;
-
-			ao_arc_rproc: remoteproc@1c {
-				compatible = "amlogic,meson-mx-ao-arc";
-				reg = <0x1c 0x8>, <0x38 0x8>;
-				reg-names = "remap", "cpu";
-				status = "disabled";
-			};
-
-			ir_receiver: ir-receiver@480 {
-				compatible = "amlogic,meson6-ir";
-				reg = <0x480 0x20>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
-				reg = <0x4c0 0x18>;
-				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			i2c_AO: i2c@500 {
-				compatible = "amlogic,meson6-i2c";
-				reg = <0x500 0x20>;
-				interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			rtc: rtc@740 {
-				compatible = "amlogic,meson6-rtc";
-				reg = <0x740 0x14>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				status = "disabled";
-			};
-		};
-
-		usb0: usb@c9040000 {
-			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xc9040000 0x40000>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb0_phy>;
-			phy-names = "usb2-phy";
-			g-rx-fifo-size = <512>;
-			g-np-tx-fifo-size = <500>;
-			g-tx-fifo-size = <256 192 128 128 128>;
-			dr_mode = "host";
-			status = "disabled";
-		};
-
-		usb1: usb@c90c0000 {
-			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xc90c0000 0x40000>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb1_phy>;
-			phy-names = "usb2-phy";
-			dr_mode = "host";
-			status = "disabled";
-		};
-
-		ethmac: ethernet@c9410000 {
-			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
-			reg = <0xc9410000 0x10000
-			       0xc1108108 0x4>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			status = "disabled";
-		};
-
-		ahb_sram: sram@d9000000 {
-			compatible = "mmio-sram";
-			reg = <0xd9000000 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0xd9000000 0x20000>;
-		};
-
-		bootrom: bootrom@d9040000 {
-			compatible = "amlogic,meson-mx-bootrom", "syscon";
-			reg = <0xd9040000 0x10000>;
-		};
-
-		secbus: secbus@da000000 {
-			compatible = "simple-bus";
-			reg = <0xda000000 0x6000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xda000000 0x6000>;
-
-			efuse: nvmem@0 {
-				compatible = "amlogic,meson6-efuse";
-				reg = <0x0 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-			};
-		};
-	};
-
-	thermal_sensor: thermal-sensor {
-		compatible = "generic-adc-thermal";
-		#thermal-sensor-cells = <0>;
-		io-channels = <&saradc 8>;
-		io-channel-names = "sensor-channel";
-	};
-
-	xtal: xtal-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
-	};
-}; /* end of / */
diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts
deleted file mode 100644
index 98e1c94c02611..0000000000000
--- a/arch/arm/boot/dts/meson6-atv1200.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- */
-
-/dts-v1/;
-#include "meson6.dtsi"
-
-/ {
-	model = "Geniatech ATV1200";
-	compatible = "geniatech,atv1200", "amlogic,meson6";
-
-	aliases {
-		serial0 = &uart_AO;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-};
-
-&uart_AO {
-	status = "okay";
-};
-
-&ethmac {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
deleted file mode 100644
index 4716030a48d0d..0000000000000
--- a/arch/arm/boot/dts/meson6.dtsi
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- */
-
-#include "meson.dtsi"
-
-/ {
-	model = "Amlogic Meson6 SoC";
-	compatible = "amlogic,meson6";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x200>;
-		};
-
-		cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x201>;
-		};
-	};
-
-	apb2: bus@d0000000 {
-		compatible = "simple-bus";
-		reg = <0xd0000000 0x40000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0xd0000000 0x40000>;
-	};
-
-	clk81: clk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <200000000>;
-	};
-}; /* end of / */
-
-&efuse {
-	status = "disabled";
-};
-
-&timer_abcde {
-	clocks = <&xtal>, <&clk81>;
-	clock-names = "xtal", "pclk";
-};
-
-&uart_AO {
-	clocks = <&xtal>, <&clk81>, <&clk81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_A {
-	clocks = <&xtal>, <&clk81>, <&clk81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_B {
-	clocks = <&xtal>, <&clk81>, <&clk81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_C {
-	clocks = <&xtal>, <&clk81>, <&clk81>;
-	clock-names = "xtal", "pclk", "baud";
-};
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
deleted file mode 100644
index c6d1c5a8a3bfe..0000000000000
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "meson8.dtsi"
-
-/ {
-	model = "MINIX NEO-X8";
-	compatible = "minix,neo-x8", "amlogic,meson8";
-
-	aliases {
-		serial0 = &uart_AO;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led-blue {
-			label = "x8:blue:power";
-			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c_AO {
-	status = "okay";
-	pinctrl-0 = <&i2c_ao_pins>;
-	pinctrl-names = "default";
-
-	pmic@32 {
-		compatible = "ricoh,rn5t618";
-		reg = <0x32>;
-		system-power-controller;
-
-		regulators {
-		};
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&spifc {
-	status = "okay";
-	pinctrl-0 = <&spi_nor_pins>;
-	pinctrl-names = "default";
-
-	flash@0 {
-		compatible = "mxicy,mx25l1606e";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x0 0x100000>;
-		};
-
-		partition@100000 {
-			label = "env";
-			reg = <0x100000 0x10000>;
-		};
-	};
-};
-
-&ir_receiver {
-	status = "okay";
-	pinctrl-0 = <&ir_recv_pins>;
-	pinctrl-names = "default";
-};
-
-&ethmac {
-	status = "okay";
-	pinctrl-0 = <&eth_pins>;
-	pnictrl-names = "default";
-};
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
deleted file mode 100644
index 4f22ab451aae2..0000000000000
--- a/arch/arm/boot/dts/meson8.dtsi
+++ /dev/null
@@ -1,806 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- */
-
-#include <dt-bindings/clock/meson8-ddr-clkc.h>
-#include <dt-bindings/clock/meson8b-clkc.h>
-#include <dt-bindings/gpio/meson8-gpio.h>
-#include <dt-bindings/power/meson8-power.h>
-#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
-#include <dt-bindings/reset/amlogic,meson8b-reset.h>
-#include <dt-bindings/thermal/thermal.h>
-#include "meson.dtsi"
-
-/ {
-	model = "Amlogic Meson8 SoC";
-	compatible = "amlogic,meson8";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x200>;
-			enable-method = "amlogic,meson8-smp";
-			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
-			operating-points-v2 = <&cpu_opp_table>;
-			clocks = <&clkc CLKID_CPUCLK>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu1: cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x201>;
-			enable-method = "amlogic,meson8-smp";
-			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
-			operating-points-v2 = <&cpu_opp_table>;
-			clocks = <&clkc CLKID_CPUCLK>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu2: cpu@202 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x202>;
-			enable-method = "amlogic,meson8-smp";
-			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
-			operating-points-v2 = <&cpu_opp_table>;
-			clocks = <&clkc CLKID_CPUCLK>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu3: cpu@203 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x203>;
-			enable-method = "amlogic,meson8-smp";
-			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
-			operating-points-v2 = <&cpu_opp_table>;
-			clocks = <&clkc CLKID_CPUCLK>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	cpu_opp_table: opp-table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-96000000 {
-			opp-hz = /bits/ 64 <96000000>;
-			opp-microvolt = <825000>;
-		};
-		opp-192000000 {
-			opp-hz = /bits/ 64 <192000000>;
-			opp-microvolt = <825000>;
-		};
-		opp-312000000 {
-			opp-hz = /bits/ 64 <312000000>;
-			opp-microvolt = <825000>;
-		};
-		opp-408000000 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <825000>;
-		};
-		opp-504000000 {
-			opp-hz = /bits/ 64 <504000000>;
-			opp-microvolt = <825000>;
-		};
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <850000>;
-		};
-		opp-720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <850000>;
-		};
-		opp-816000000 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <875000>;
-		};
-		opp-1008000000 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <925000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <975000>;
-		};
-		opp-1416000000 {
-			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <1025000>;
-		};
-		opp-1608000000 {
-			opp-hz = /bits/ 64 <1608000000>;
-			opp-microvolt = <1100000>;
-		};
-		opp-1800000000 {
-			status = "disabled";
-			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <1125000>;
-		};
-		opp-1992000000 {
-			status = "disabled";
-			opp-hz = /bits/ 64 <1992000000>;
-			opp-microvolt = <1150000>;
-		};
-	};
-
-	gpu_opp_table: opp-table-gpu {
-		compatible = "operating-points-v2";
-
-		opp-182142857 {
-			opp-hz = /bits/ 64 <182142857>;
-			opp-microvolt = <1150000>;
-		};
-		opp-318750000 {
-			opp-hz = /bits/ 64 <318750000>;
-			opp-microvolt = <1150000>;
-		};
-		opp-425000000 {
-			opp-hz = /bits/ 64 <425000000>;
-			opp-microvolt = <1150000>;
-		};
-		opp-510000000 {
-			opp-hz = /bits/ 64 <510000000>;
-			opp-microvolt = <1150000>;
-		};
-		opp-637500000 {
-			opp-hz = /bits/ 64 <637500000>;
-			opp-microvolt = <1150000>;
-			turbo-mode;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* 2 MiB reserved for Hardware ROM Firmware? */
-		hwrom@0 {
-			reg = <0x0 0x200000>;
-			no-map;
-		};
-
-		/*
-		 * 1 MiB reserved for the "ARM Power Firmware": this is ARM
-		 * code which is responsible for system suspend. It loads a
-		 * piece of ARC code ("arc_power" in the vendor u-boot tree)
-		 * into SRAM, executes that and shuts down the (last) ARM core.
-		 * The arc_power firmware then checks various wakeup sources
-		 * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or
-		 * simply the power key) and re-starts the ARM core once it
-		 * detects a wakeup request.
-		 */
-		power-firmware@4f00000 {
-			reg = <0x4f00000 0x100000>;
-			no-map;
-		};
-	};
-
-	thermal-zones {
-		soc {
-			polling-delay-passive = <250>; /* milliseconds */
-			polling-delay = <1000>; /* milliseconds */
-			thermal-sensors = <&thermal_sensor>;
-
-			cooling-maps {
-				map0 {
-					trip = <&soc_passive>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-
-				map1 {
-					trip = <&soc_hot>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-
-			trips {
-				soc_passive: soc-passive {
-					temperature = <80000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "passive";
-				};
-
-				soc_hot: soc-hot {
-					temperature = <90000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "hot";
-				};
-
-				soc_critical: soc-critical {
-					temperature = <110000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	mmcbus: bus@c8000000 {
-		compatible = "simple-bus";
-		reg = <0xc8000000 0x8000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0xc8000000 0x8000>;
-
-		ddr_clkc: clock-controller@400 {
-			compatible = "amlogic,meson8-ddr-clkc";
-			reg = <0x400 0x20>;
-			clocks = <&xtal>;
-			clock-names = "xtal";
-			#clock-cells = <1>;
-		};
-
-		dmcbus: bus@6000 {
-			compatible = "simple-bus";
-			reg = <0x6000 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6000 0x400>;
-
-			canvas: video-lut@20 {
-				compatible = "amlogic,meson8-canvas",
-					     "amlogic,canvas";
-				reg = <0x20 0x14>;
-			};
-		};
-	};
-
-	apb: bus@d0000000 {
-		compatible = "simple-bus";
-		reg = <0xd0000000 0x200000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0xd0000000 0x200000>;
-
-		mali: gpu@c0000 {
-			compatible = "amlogic,meson8-mali", "arm,mali-450";
-			reg = <0xc0000 0x40000>;
-			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gp", "gpmmu", "pp", "pmu",
-					  "pp0", "ppmmu0", "pp1", "ppmmu1",
-					  "pp2", "ppmmu2", "pp4", "ppmmu4",
-					  "pp5", "ppmmu5", "pp6", "ppmmu6";
-			resets = <&reset RESET_MALI>;
-
-			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
-			clock-names = "bus", "core";
-
-			assigned-clocks = <&clkc CLKID_MALI>;
-			assigned-clock-rates = <318750000>;
-
-			operating-points-v2 = <&gpu_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-}; /* end of / */
-
-&aiu {
-	compatible = "amlogic,aiu-meson8", "amlogic,aiu";
-	clocks = <&clkc CLKID_AIU_GLUE>,
-		 <&clkc CLKID_I2S_OUT>,
-		 <&clkc CLKID_AOCLK_GATE>,
-		 <&clkc CLKID_CTS_AMCLK>,
-		 <&clkc CLKID_MIXER_IFACE>,
-		 <&clkc CLKID_IEC958>,
-		 <&clkc CLKID_IEC958_GATE>,
-		 <&clkc CLKID_CTS_MCLK_I958>,
-		 <&clkc CLKID_CTS_I958>;
-	clock-names = "pclk",
-		      "i2s_pclk",
-		      "i2s_aoclk",
-		      "i2s_mclk",
-		      "i2s_mixer",
-		      "spdif_pclk",
-		      "spdif_aoclk",
-		      "spdif_mclk",
-		      "spdif_mclk_sel";
-	resets = <&reset RESET_AIU>;
-};
-
-&aobus {
-	pmu: pmu@e0 {
-		compatible = "amlogic,meson8-pmu", "syscon";
-		reg = <0xe0 0x18>;
-	};
-
-	pinctrl_aobus: pinctrl@84 {
-		compatible = "amlogic,meson8-aobus-pinctrl";
-		reg = <0x84 0xc>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio_ao: ao-bank@14 {
-			reg = <0x14 0x4>,
-			      <0x2c 0x4>,
-			      <0x24 0x8>;
-			reg-names = "mux", "pull", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_aobus 0 0 16>;
-		};
-
-		i2s_am_clk_pins: i2s-am-clk-out {
-			mux {
-				groups = "i2s_am_clk_out_ao";
-				function = "i2s_ao";
-				bias-disable;
-			};
-		};
-
-		i2s_out_ao_clk_pins: i2s-ao-clk-out {
-			mux {
-				groups = "i2s_ao_clk_out_ao";
-				function = "i2s_ao";
-				bias-disable;
-			};
-		};
-
-		i2s_out_lr_clk_pins: i2s-lr-clk-out {
-			mux {
-				groups = "i2s_lr_clk_out_ao";
-				function = "i2s_ao";
-				bias-disable;
-			};
-		};
-
-		i2s_out_ch01_ao_pins: i2s-out-ch01 {
-			mux {
-				groups = "i2s_out_ch01_ao";
-				function = "i2s_ao";
-				bias-disable;
-			};
-		};
-
-		uart_ao_a_pins: uart_ao_a {
-			mux {
-				groups = "uart_tx_ao_a", "uart_rx_ao_a";
-				function = "uart_ao";
-				bias-disable;
-			};
-		};
-
-		i2c_ao_pins: i2c_mst_ao {
-			mux {
-				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
-				function = "i2c_mst_ao";
-				bias-disable;
-			};
-		};
-
-		ir_recv_pins: remote {
-			mux {
-				groups = "remote_input";
-				function = "remote";
-				bias-disable;
-			};
-		};
-
-		pwm_f_ao_pins: pwm-f-ao {
-			mux {
-				groups = "pwm_f_ao";
-				function = "pwm_f_ao";
-				bias-disable;
-			};
-		};
-	};
-};
-
-&ao_arc_rproc {
-	compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
-	amlogic,secbus2 = <&secbus2>;
-	sram = <&ao_arc_sram>;
-	resets = <&reset RESET_MEDIA_CPU>;
-	clocks = <&clkc CLKID_AO_MEDIA_CPU>;
-};
-
-&cbus {
-	reset: reset-controller@4404 {
-		compatible = "amlogic,meson8b-reset";
-		reg = <0x4404 0x9c>;
-		#reset-cells = <1>;
-	};
-
-	analog_top: analog-top@81a8 {
-		compatible = "amlogic,meson8-analog-top", "syscon";
-		reg = <0x81a8 0x14>;
-	};
-
-	pwm_ef: pwm@86c0 {
-		compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
-		reg = <0x86c0 0x10>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	clock-measure@8758 {
-		compatible = "amlogic,meson8-clk-measure";
-		reg = <0x8758 0x1c>;
-	};
-
-	pinctrl_cbus: pinctrl@9880 {
-		compatible = "amlogic,meson8-cbus-pinctrl";
-		reg = <0x9880 0x10>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio: banks@80b0 {
-			reg = <0x80b0 0x28>,
-			      <0x80e8 0x18>,
-			      <0x8120 0x18>,
-			      <0x8030 0x30>;
-			reg-names = "mux", "pull", "pull-enable", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_cbus 0 0 120>;
-		};
-
-		sd_a_pins: sd-a {
-			mux {
-				groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
-					"sd_d3_a", "sd_clk_a", "sd_cmd_a";
-				function = "sd_a";
-				bias-disable;
-			};
-		};
-
-		sd_b_pins: sd-b {
-			mux {
-				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
-					"sd_d3_b", "sd_clk_b", "sd_cmd_b";
-				function = "sd_b";
-				bias-disable;
-			};
-		};
-
-		sd_c_pins: sd-c {
-			mux {
-				groups = "sd_d0_c", "sd_d1_c", "sd_d2_c",
-					"sd_d3_c", "sd_clk_c", "sd_cmd_c";
-				function = "sd_c";
-				bias-disable;
-			};
-		};
-
-		sdxc_a_pins: sdxc-a {
-			mux {
-				groups = "sdxc_d0_a", "sdxc_d13_a",
-					 "sdxc_clk_a", "sdxc_cmd_a";
-				function = "sdxc_a";
-				bias-pull-up;
-			};
-		};
-
-		sdxc_b_pins: sdxc-b {
-			mux {
-				groups = "sdxc_d0_b", "sdxc_d13_b",
-					 "sdxc_clk_b", "sdxc_cmd_b";
-				function = "sdxc_b";
-				bias-pull-up;
-			};
-		};
-
-		spdif_out_pins: spdif-out {
-			mux {
-				groups = "spdif_out";
-				function = "spdif";
-				bias-disable;
-			};
-		};
-
-		spi_nor_pins: nor {
-			mux {
-				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
-				function = "nor";
-				bias-disable;
-			};
-		};
-
-		eth_pins: ethernet {
-			mux {
-				groups = "eth_tx_clk_50m", "eth_tx_en",
-					 "eth_txd1", "eth_txd0",
-					 "eth_rx_clk_in", "eth_rx_dv",
-					 "eth_rxd1", "eth_rxd0", "eth_mdio",
-					 "eth_mdc";
-				function = "ethernet";
-				bias-disable;
-			};
-		};
-
-		pwm_e_pins: pwm-e {
-			mux {
-				groups = "pwm_e";
-				function = "pwm_e";
-				bias-disable;
-			};
-		};
-
-		uart_a1_pins: uart-a1 {
-			mux {
-				groups = "uart_tx_a1",
-				       "uart_rx_a1";
-				function = "uart_a";
-				bias-disable;
-			};
-		};
-
-		uart_a1_cts_rts_pins: uart-a1-cts-rts {
-			mux {
-				groups = "uart_cts_a1",
-				       "uart_rts_a1";
-				function = "uart_a";
-				bias-disable;
-			};
-		};
-
-		xtal_32k_out_pins: xtal-32k-out {
-			mux {
-				groups = "xtal_32k_out";
-				function = "xtal";
-				bias-disable;
-			};
-		};
-	};
-};
-
-&ahb_sram {
-	ao_arc_sram: ao-arc-sram@0 {
-		compatible = "amlogic,meson8-ao-arc-sram";
-		reg = <0x0 0x8000>;
-		pool;
-	};
-
-	smp-sram@1ff80 {
-		compatible = "amlogic,meson8-smp-sram";
-		reg = <0x1ff80 0x8>;
-	};
-};
-
-&efuse {
-	compatible = "amlogic,meson8-efuse";
-	clocks = <&clkc CLKID_EFUSE>;
-	clock-names = "core";
-
-	temperature_calib: calib@1f4 {
-		/* only the upper two bytes are relevant */
-		reg = <0x1f4 0x4>;
-	};
-};
-
-&ethmac {
-	clocks = <&clkc CLKID_ETH>;
-	clock-names = "stmmaceth";
-
-	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
-};
-
-&gpio_intc {
-	compatible = "amlogic,meson8-gpio-intc", "amlogic,meson-gpio-intc";
-	status = "okay";
-};
-
-&hhi {
-	clkc: clock-controller {
-		compatible = "amlogic,meson8-clkc";
-		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
-		clock-names = "xtal", "ddr_pll";
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	pwrc: power-controller {
-		compatible = "amlogic,meson8-pwrc";
-		#power-domain-cells = <1>;
-		amlogic,ao-sysctrl = <&pmu>;
-		clocks = <&clkc CLKID_VPU>;
-		clock-names = "vpu";
-		assigned-clocks = <&clkc CLKID_VPU>;
-		assigned-clock-rates = <364285714>;
-	};
-};
-
-&hwrng {
-	compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
-	clocks = <&clkc CLKID_RNG0>;
-	clock-names = "core";
-};
-
-&i2c_AO {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&i2c_A {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&i2c_B {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&L2 {
-	arm,data-latency = <3 3 3>;
-	arm,tag-latency = <2 2 2>;
-	arm,filter-ranges = <0x100000 0xc0000000>;
-	prefetch-data = <1>;
-	prefetch-instr = <1>;
-	arm,prefetch-offset = <7>;
-	arm,double-linefill = <1>;
-	arm,prefetch-drop = <1>;
-	arm,shared-override;
-};
-
-&periph {
-	scu@0 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x0 0x100>;
-	};
-
-	timer@200 {
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0x200 0x20>;
-		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-		clocks = <&clkc CLKID_PERIPH>;
-
-		/*
-		 * the arm_global_timer driver currently does not handle clock
-		 * rate changes. Keep it disabled for now.
-		 */
-		status = "disabled";
-	};
-
-	timer@600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x600 0x20>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-		clocks = <&clkc CLKID_PERIPH>;
-	};
-};
-
-&pwm_ab {
-	compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
-};
-
-&pwm_cd {
-	compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
-};
-
-&rtc {
-	compatible = "amlogic,meson8-rtc";
-	resets = <&reset RESET_RTC>;
-};
-
-&saradc {
-	compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
-	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
-	clock-names = "clkin", "core";
-	amlogic,hhi-sysctrl = <&hhi>;
-	nvmem-cells = <&temperature_calib>;
-	nvmem-cell-names = "temperature_calib";
-};
-
-&sdhc {
-	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
-	clocks = <&xtal>,
-		 <&clkc CLKID_FCLK_DIV4>,
-		 <&clkc CLKID_FCLK_DIV3>,
-		 <&clkc CLKID_FCLK_DIV5>,
-		 <&clkc CLKID_SDHC>;
-	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
-};
-
-&secbus {
-	secbus2: system-controller@4000 {
-		compatible = "amlogic,meson8-secbus2", "syscon";
-		reg = <0x4000 0x2000>;
-	};
-};
-
-&sdio {
-	compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
-	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
-	clock-names = "core", "clkin";
-};
-
-&spifc {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&timer_abcde {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "xtal", "pclk";
-};
-
-&uart_AO {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_A {
-	compatible = "amlogic,meson8-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_B {
-	compatible = "amlogic,meson8-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_C {
-	compatible = "amlogic,meson8-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&usb0 {
-	compatible = "amlogic,meson8-usb", "snps,dwc2";
-	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
-	clock-names = "otg";
-};
-
-&usb1 {
-	compatible = "amlogic,meson8-usb", "snps,dwc2";
-	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
-	clock-names = "otg";
-};
-
-&usb0_phy {
-	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
-	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
-	clock-names = "usb_general", "usb";
-	resets = <&reset RESET_USB_OTG>;
-};
-
-&usb1_phy {
-	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
-	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
-	clock-names = "usb_general", "usb";
-	resets = <&reset RESET_USB_OTG>;
-};
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
deleted file mode 100644
index 3da47349eaaf7..0000000000000
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ /dev/null
@@ -1,479 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "meson8b.dtsi"
-
-/ {
-	model = "Endless Computers Endless Mini";
-	compatible = "endless,ec100", "amlogic,meson8b";
-
-	aliases {
-		serial0 = &uart_AO;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		pal-switch {
-			label = "pal";
-			linux,input-type = <EV_SW>;
-			linux,code = <KEY_SWITCHVIDEOMODE>;
-			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
-		};
-
-		ntsc-switch {
-			label = "ntsc";
-			linux,input-type = <EV_SW>;
-			linux,code = <KEY_SWITCHVIDEOMODE>;
-			gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>;
-		};
-
-		power-button {
-			label = "power";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio GPIOH_9 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		/*
-		 * shutdown is managed by the EC (embedded micro-controller)
-		 * which is configured through GPIOAO_2 (poweroff GPIO) and
-		 * GPIOAO_7 (power LED, which has to go LOW as well).
-		 */
-		gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
-		timeout-ms = <20000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power {
-			label = "ec100:red:power";
-			/*
-			 * Needs to go LOW (together with the poweroff GPIO)
-			 * during shutdown to allow the EC (embedded
-			 * micro-controller) to shutdown the system. Setting
-			 * the output to LOW signals the EC to start a
-			 * "breathing"/pulsing effect until the power is fully
-			 * turned off.
-			 */
-			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	rtc32k_xtal: rtc32k-xtal-clk {
-		/* X2 in the schematics */
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "RTC32K";
-		#clock-cells = <0>;
-	};
-
-	sound {
-		compatible = "amlogic,gx-sound-card";
-		model = "M8B-EC100";
-
-		assigned-clocks = <&clkc CLKID_MPLL0>,
-				  <&clkc CLKID_MPLL1>,
-				  <&clkc CLKID_MPLL2>;
-		assigned-clock-rates = <270950400>,
-				       <294912000>,
-				       <393216000>;
-
-		dai-link-0 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
-		};
-
-		dai-link-1 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
-			dai-format = "i2s";
-			mclk-fs = <256>;
-
-			codec-0 {
-				sound-dai = <&rt5640>;
-			};
-		};
-	};
-
-	usb_vbus: regulator-usb-vbus {
-		/*
-		 * Silergy SY6288CCAC-GP 2A Power Distribution Switch.
-		 */
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		vin-supply = <&vcc_5v>;
-
-		/*
-		 * signal name from the schematics: USB_PWR_EN
-		 */
-		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vcc_5v: regulator-vcc5v {
-		/*
-		 * supplied by the main power input which called PWR_5V_STB
-		 * in the schematics
-		 */
-		compatible = "regulator-fixed";
-
-		regulator-name = "VCC5V";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		/*
-		 * signal name from the schematics: 3V3_5V_EN
-		 */
-		gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcck: regulator-vcck {
-		/*
-		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
-		 * Synchronous Step Down Regulator.
-		 */
-		compatible = "pwm-regulator";
-
-		regulator-name = "VCCK";
-		regulator-min-microvolt = <860000>;
-		regulator-max-microvolt = <1140000>;
-
-		pwm-supply = <&vcc_5v>;
-
-		pwms = <&pwm_cd 0 1148 0>;
-		pwm-dutycycle-range = <100 0>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_1v8: regulator-vcc1v8 {
-		/*
-		 * ABLIC S-1339D18-M5001-GP
-		 */
-		compatible = "regulator-fixed";
-
-		regulator-name = "VCC1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		vin-supply = <&vcc_3v3>;
-	};
-
-	vcc_3v3: regulator-vcc3v3 {
-		/*
-		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
-		 * Synchronous Step Down Regulator. Also called
-		 * VDDIO_AO3.3V in the schematics.
-		 */
-		compatible = "regulator-fixed";
-
-		regulator-name = "VCC3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		vin-supply = <&vcc_5v>;
-	};
-
-	vcc_ddr3: regulator-vcc-ddr3 {
-		/*
-		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
-		 * Synchronous Step Down Regulator. Also called
-		 * DDR3_1.5V in the schematics.
-		 */
-		compatible = "regulator-fixed";
-
-		regulator-name = "VCC_DDR3_1V5";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-
-		vin-supply = <&vcc_5v>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_rtc: regulator-vcc-rtc {
-		/*
-		 * Global Mixed-mode Technology Inc. G918T12U-GP
-		 */
-		compatible = "regulator-fixed";
-
-		regulator-name = "VCC_RTC";
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-
-		/*
-		 * When the board is powered then the input is VCC3V3,
-		 * otherwise power is taken from the coin cell battery.
-		 */
-		vin-supply = <&vcc_3v3>;
-	};
-
-	vddee: regulator-vddee {
-		/*
-		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
-		 * Synchronous Step Down Regulator. Also called VDDAO
-		 * in a part of the schematics.
-		 */
-		compatible = "pwm-regulator";
-
-		regulator-name = "VDDEE";
-		regulator-min-microvolt = <860000>;
-		regulator-max-microvolt = <1140000>;
-
-		pwm-supply = <&vcc_5v>;
-
-		pwms = <&pwm_cd 1 1148 0>;
-		pwm-dutycycle-range = <100 0>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&aiu {
-	status = "okay";
-
-	pinctrl-0 = <&i2s_am_clk_pins>, <&i2s_out_ao_clk_pins>,
-		    <&i2s_out_lr_clk_pins>, <&i2s_out_ch01_ao_pins>;
-	pinctrl-names = "default";
-};
-
-&cpu0 {
-	cpu-supply = <&vcck>;
-};
-
-&ethmac {
-	status = "okay";
-
-	pinctrl-0 = <&eth_rmii_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&eth_phy0>;
-	phy-mode = "rmii";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		eth_phy0: ethernet-phy@0 {
-			/* IC Plus IP101A/G (0x02430c54) */
-			reg = <0>;
-
-			reset-assert-us = <10000>;
-			reset-deassert-us = <10000>;
-			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
-
-			icplus,select-interrupt;
-			interrupt-parent = <&gpio_intc>;
-			/* GPIOH_3 */
-			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
-};
-
-&i2c_A {
-	status = "okay";
-	pinctrl-0 = <&i2c_a_pins>;
-	pinctrl-names = "default";
-
-	rt5640: codec@1c {
-		compatible = "realtek,rt5640";
-
-		reg = <0x1c>;
-
-		#sound-dai-cells = <0>;
-
-		interrupt-parent = <&gpio_intc>;
-		interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
-
-		/*
-		 * TODO: realtek,ldo1-en-gpios is connected to GPIO_BSD_EN.
-		 * We currently cannot configure this pin correctly.
-		 * Luckily for us it's in the "right" state by default.
-		 */
-		realtek,in1-differential;
-	};
-};
-
-&mali {
-	mali-supply = <&vddee>;
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vcc_1v8>;
-};
-
-&sdhc {
-	status = "okay";
-
-	pinctrl-0 = <&sdxc_c_pins>;
-	pinctrl-names = "default";
-
-	bus-width = <8>;
-	max-frequency = <50000000>;
-
-	cap-mmc-highspeed;
-	disable-wp;
-	non-removable;
-	no-sdio;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vcc_3v3>;
-};
-
-&sdio {
-	status = "okay";
-
-	pinctrl-0 = <&sd_b_pins>;
-	pinctrl-names = "default";
-
-	/* SD card */
-	sd_card_slot: slot@1 {
-		compatible = "mmc-slot";
-		reg = <1>;
-		status = "okay";
-
-		bus-width = <4>;
-		no-sdio;
-		cap-mmc-highspeed;
-		cap-sd-highspeed;
-		disable-wp;
-
-		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
-		vmmc-supply = <&vcc_3v3>;
-	};
-};
-
-&gpio_ao {
-	gpio-line-names = "Linux_TX", "Linux_RX",
-			  "SLP_S5_N", "USB2_OC_FLAG#",
-			  "HUB_RST", "USB_PWR_EN",
-			  "I2S_IN", "SLP_S1_N",
-			  "TCK", "TMS", "TDI", "TDO",
-			  "HDMI_CEC", "5640_IRQ",
-			  "MUTE", "S805_TEST#";
-};
-
-&gpio {
-	gpio-line-names = /* Bank GPIOX */
-			  "WIFI_SD_D0", "WIFI_SD_D1", "WIFI_SD_D2",
-			  "WIFI_SD_D3", "BTPCM_DOUT", "BTPCM_DIN",
-			  "BTPCM_SYNC", "BTPCM_CLK", "WIFI_SD_CLK",
-			  "WIFI_SD_CMD", "WIFI_32K", "WIFI_PWREN",
-			  "UART_B_TX", "UART_B_RX", "UART_B_CTS_N",
-			  "UART_B_RTS_N", "BT_EN", "WIFI_WAKE_HOST",
-			  /* Bank GPIOY */
-			  "", "", "", "", "", "", "", "", "", "",
-			  "", "",
-			  /* Bank GPIODV */
-			  "VCCK_PWM_C", "I2C_SDA_A", "I2C_SCL_A",
-			  "I2C_SDA_B", "I2C_SCL_B", "VDDEE_PWM_D",
-			  "VDDEE_PWM 3V3_5V_EN",
-			  /* Bank GPIOH */
-			  "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
-			  "RMII_IRQ", "RMII_RST#", "RMII_TXD1",
-			  "RMII_TXD0", "AV_select_1", "AV_select_2",
-			  "MCU_Control_S",
-			  /* Bank CARD */
-			  "SD_D1_B", "SD_D0_B", "SD_CLK_8726MX",
-			  "SD_CMD_8726MX", "SD_D3_B", "SD_D2_B",
-			  "CARD_EN_DET (CARD_DET)",
-			  /* Bank BOOT */
-			  "NAND_D0 (EMMC)", "NAND_D1 (EMMC)",
-			  "NAND_D2 (EMMC)", "NAND_D3 (EMMC)",
-			  "NAND_D4 (EMMC)", "NAND_D5 (EMMC)",
-			  "NAND_D6 (EMMC)", "NAND_D7 (EMMC)",
-			  "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)",
-			  "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)",
-			  "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)",
-			  "nWE_S1 NAND_nWE (EMMC)",  "", "", "SPI_CS",
-			  /* Bank DIF */
-			  "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV",
-			  "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5",
-			  "RMII_TXEN", "CPUETH_25MOUT", "RMII_MDC",
-			  "RMII_MDIO";
-};
-
-&pwm_cd {
-	status = "okay";
-	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
-	pinctrl-names = "default";
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&rtc32k_xtal>;
-	vdd-supply = <&vcc_rtc>;
-};
-
-/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-/*
- * connected to the Bluetooth part of the RTL8723BS SDIO wifi / Bluetooth
- * combo chip. This is only available on the variant with 2GB RAM.
- */
-&uart_B {
-	status = "okay";
-	pinctrl-0 = <&uart_b0_pins>, <&uart_b0_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-};
-
-&usb1 {
-	status = "okay";
-	vbus-supply = <&usb_vbus>;
-};
-
-&usb1_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
deleted file mode 100644
index 7adedd3258c33..0000000000000
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ /dev/null
@@ -1,189 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2015 Endless Mobile, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "meson8b.dtsi"
-
-/ {
-	model = "TRONFY MXQ S805";
-	compatible = "tronfy,mxq", "amlogic,meson8b";
-
-	aliases {
-		serial0 = &uart_AO;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	vcck: regulator-vcck {
-		compatible = "pwm-regulator";
-
-		regulator-name = "VCCK";
-		regulator-min-microvolt = <860000>;
-		regulator-max-microvolt = <1140000>;
-
-		pwm-supply = <&vcc_5v>;
-
-		pwms = <&pwm_cd 0 1148 0>;
-		pwm-dutycycle-range = <100 0>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_1v8: regulator-vcc1v8 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VCC1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		vin-supply = <&vcc_3v3>;
-	};
-
-	vcc_3v3: regulator-vcc3v3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VCC3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		vin-supply = <&vcc_5v>;
-	};
-
-	vcc_5v: regulator-vcc5v {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VCC5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vddee: regulator-vddee {
-		compatible = "pwm-regulator";
-
-		regulator-name = "VDDEE";
-		regulator-min-microvolt = <860000>;
-		regulator-max-microvolt = <1140000>;
-
-		pwm-supply = <&vcc_5v>;
-
-		pwms = <&pwm_cd 1 1148 0>;
-		pwm-dutycycle-range = <100 0>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&vcck>;
-};
-
-&ethmac {
-	status = "okay";
-
-	pinctrl-0 = <&eth_rmii_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&eth_phy0>;
-	phy-mode = "rmii";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		eth_phy0: ethernet-phy@0 {
-			/* IC Plus IP101A/G (0x02430c54) */
-			reg = <0>;
-
-			reset-assert-us = <10000>;
-			reset-deassert-us = <10000>;
-			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
-
-			icplus,select-interrupt;
-			interrupt-parent = <&gpio_intc>;
-			/* GPIOH_3 */
-			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
-};
-
-&mali {
-	mali-supply = <&vddee>;
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vcc_1v8>;
-};
-
-&sdio {
-	status = "okay";
-
-	pinctrl-0 = <&sd_b_pins>;
-	pinctrl-names = "default";
-
-	/* SD card */
-	sd_card_slot: slot@1 {
-		compatible = "mmc-slot";
-		reg = <1>;
-		status = "okay";
-
-		bus-width = <4>;
-		no-sdio;
-		cap-mmc-highspeed;
-		cap-sd-highspeed;
-		disable-wp;
-
-		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
-		vmmc-supply = <&vcc_3v3>;
-	};
-};
-
-&pwm_cd {
-	status = "okay";
-	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
-	pinctrl-names = "default";
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
deleted file mode 100644
index 941682844faf4..0000000000000
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ /dev/null
@@ -1,383 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2015 Endless Mobile, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-/dts-v1/;
-#include "meson8b.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Hardkernel ODROID-C1";
-	compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
-
-	aliases {
-		serial0 = &uart_AO;
-		mmc0 = &sd_card_slot;
-		mmc1 = &sdhc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-blue {
-			label = "c1:blue:alive";
-			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	p5v0: regulator-p5v0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "P5V0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	tflash_vdd: regulator-tflash_vdd {
-		/*
-		 * signal name from schematics: TFLASH_VDD_EN
-		 */
-		compatible = "regulator-fixed";
-
-		regulator-name = "TFLASH_VDD";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		vin-supply = <&vcc_3v3>;
-
-		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	tf_io: gpio-regulator-tf_io {
-		compatible = "regulator-gpio";
-
-		regulator-name = "TF_IO";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		vin-supply = <&vcc_3v3>;
-
-		/*
-		 * signal name from schematics: TF_3V3N_1V8_EN
-		 */
-		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
-		gpios-states = <0>;
-
-		states = <3300000 0
-			  1800000 1>;
-	};
-
-	rtc32k_xtal: rtc32k-xtal-clk {
-		/* X3 in the schematics */
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "RTC32K";
-		#clock-cells = <0>;
-	};
-
-	vcc_1v8: regulator-vcc-1v8 {
-		/*
-		 * RICHTEK RT9179 configured for a fixed output voltage of
-		 * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and
-		 * VDD1V8 according to the schematics.
-		 */
-		compatible = "regulator-fixed";
-
-		regulator-name = "VCC1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		vin-supply = <&p5v0>;
-	};
-
-	vcc_3v3: regulator-vcc-3v3 {
-		/*
-		 * Monolithic Power Systems MP2161 configured for a fixed
-		 * output voltage of 3.3V. This supplies not only VCC3V3 but
-		 * also VDD3V3 and VDDIO_AO3V3 according to the schematics.
-		 */
-		compatible = "regulator-fixed";
-
-		regulator-name = "VCC3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		vin-supply = <&p5v0>;
-	};
-
-	vcck: regulator-vcck {
-		/* Monolithic Power Systems MP2161 */
-		compatible = "pwm-regulator";
-
-		regulator-name = "VCCK";
-		regulator-min-microvolt = <860000>;
-		regulator-max-microvolt = <1140000>;
-
-		pwm-supply = <&p5v0>;
-
-		pwms = <&pwm_cd 0 12218 0>;
-		pwm-dutycycle-range = <91 0>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vddc_ddr: regulator-vddc-ddr {
-		/*
-		 * Monolithic Power Systems MP2161 configured for a fixed
-		 * output voltage of 1.5V. This supplies not only DDR_VDDC but
-		 * also DDR3_1V5 according to the schematics.
-		 */
-		compatible = "regulator-fixed";
-
-		regulator-name = "DDR_VDDC";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-
-		vin-supply = <&p5v0>;
-	};
-
-	vddee: regulator-vddee {
-		/* Monolithic Power Systems MP2161 */
-		compatible = "pwm-regulator";
-
-		regulator-name = "VDDEE";
-		regulator-min-microvolt = <860000>;
-		regulator-max-microvolt = <1140000>;
-
-		pwm-supply = <&p5v0>;
-
-		pwms = <&pwm_cd 1 12218 0>;
-		pwm-dutycycle-range = <91 0>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vdd_rtc: regulator-vdd-rtc {
-		/*
-		 * Torex Semiconductor XC6215 configured for a fixed output of
-		 * 0.9V.
-		 */
-		compatible = "regulator-fixed";
-
-		regulator-name = "VDD_RTC";
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-
-		vin-supply = <&vcc_3v3>;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&vcck>;
-};
-
-&efuse {
-	ethernet_mac_address: mac@1b4 {
-		reg = <0x1b4 0x6>;
-	};
-};
-
-&ethmac {
-	status = "okay";
-
-	pinctrl-0 = <&eth_rgmii_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&eth_phy>;
-	phy-mode = "rgmii-id";
-
-	nvmem-cells = <&ethernet_mac_address>;
-	nvmem-cell-names = "mac-address";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Realtek RTL8211F (0x001cc916) */
-		eth_phy: ethernet-phy@0 {
-			reg = <0>;
-
-			reset-assert-us = <10000>;
-			reset-deassert-us = <80000>;
-			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
-
-			interrupt-parent = <&gpio_intc>;
-			/* GPIOH_3 */
-			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
-};
-
-&gpio {
-	gpio-line-names = /* Bank GPIOX */
-			  "J2 Header Pin 35", "J2 Header Pin 36",
-			  "J2 Header Pin 32", "J2 Header Pin 31",
-			  "J2 Header Pin 29", "J2 Header Pin 18",
-			  "J2 Header Pin 22", "J2 Header Pin 16",
-			  "J2 Header Pin 23", "J2 Header Pin 21",
-			  "J2 Header Pin 19", "J2 Header Pin 33",
-			  "J2 Header Pin 8", "J2 Header Pin 10",
-			  "J2 Header Pin 15", "J2 Header Pin 13",
-			  "J2 Header Pin 24", "J2 Header Pin 26",
-			  /* Bank GPIOY */
-			  "Revision (upper)", "Revision (lower)",
-			  "J2 Header Pin 7", "", "J2 Header Pin 12",
-			  "J2 Header Pin 11", "", "", "",
-			  "TFLASH_VDD_EN", "", "",
-			  /* Bank GPIODV */
-			  "VCCK_PWM (PWM_C)", "I2CA_SDA", "I2CA_SCL",
-			  "I2CB_SDA", "I2CB_SCL", "VDDEE_PWM (PWM_D)",
-			  "",
-			  /* Bank GPIOH */
-			  "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
-			  "ETH_PHY_INTR", "ETH_PHY_NRST", "ETH_TXD1",
-			  "ETH_TXD0", "ETH_TXD3", "ETH_TXD2",
-			  "ETH_RGMII_TX_CLK",
-			  /* Bank CARD */
-			  "SD_DATA1 (SDB_D1)", "SD_DATA0 (SDB_D0)",
-			  "SD_CLK",  "SD_CMD", "SD_DATA3 (SDB_D3)",
-			  "SD_DATA2 (SDB_D2)", "SD_CDN (SD_DET_N)",
-			  /* Bank BOOT */
-			  "SDC_D0 (EMMC)", "SDC_D1 (EMMC)",
-			  "SDC_D2 (EMMC)", "SDC_D3 (EMMC)",
-			  "SDC_D4 (EMMC)", "SDC_D5 (EMMC)",
-			  "SDC_D6 (EMMC)", "SDC_D7 (EMMC)",
-			  "SDC_CLK (EMMC)", "SDC_RSTn (EMMC)",
-			  "SDC_CMD (EMMC)", "BOOT_SEL", "", "", "",
-			  "", "", "", "",
-			  /* Bank DIF */
-			  "ETH_RXD1", "ETH_RXD0", "ETH_RX_DV",
-			  "RGMII_RX_CLK", "ETH_RXD3", "ETH_RXD2",
-			  "ETH_TXEN", "ETH_PHY_REF_CLK_25MOUT",
-			  "ETH_MDC", "ETH_MDIO";
-};
-
-&gpio_ao {
-	gpio-line-names = "UART TX", "UART RX", "",
-			  "TF_3V3N_1V8_EN", "USB_HUB_RST_N",
-			  "USB_OTG_PWREN", "J7 Header Pin 2",
-			  "IR_IN", "J7 Header Pin 4",
-			  "J7 Header Pin 6", "J7 Header Pin 5",
-			  "J7 Header Pin 7", "HDMI_CEC",
-			  "SYS_LED", "", "";
-};
-
-&ir_receiver {
-	status = "okay";
-	pinctrl-0 = <&ir_recv_pins>;
-	pinctrl-names = "default";
-};
-
-&mali {
-	mali-supply = <&vddee>;
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vcc_1v8>;
-};
-
-&sdhc {
-	status = "okay";
-
-	pinctrl-0 = <&sdxc_c_pins>;
-	pinctrl-names = "default";
-
-	bus-width = <8>;
-	max-frequency = <100000000>;
-
-	disable-wp;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	no-sdio;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vcc_1v8>;
-};
-
-&sdio {
-	status = "okay";
-
-	pinctrl-0 = <&sd_b_pins>;
-	pinctrl-names = "default";
-
-	/* SD card */
-	sd_card_slot: slot@1 {
-		compatible = "mmc-slot";
-		reg = <1>;
-		status = "okay";
-
-		bus-width = <4>;
-		no-sdio;
-		cap-mmc-highspeed;
-		cap-sd-highspeed;
-		disable-wp;
-
-		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
-		vmmc-supply = <&tflash_vdd>;
-		vqmmc-supply = <&tf_io>;
-	};
-};
-
-&pwm_cd {
-	status = "okay";
-	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
-	pinctrl-names = "default";
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
-};
-
-&rtc {
-	/* needs to be enabled manually when a battery is connected */
-	clocks = <&rtc32k_xtal>;
-	vdd-supply = <&vdd_rtc>;
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "host";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	hub@1 {
-		/* Genesys Logic GL852G usb hub */
-		compatible = "usb5e3,610";
-		reg = <1>;
-		vdd-supply = <&p5v0>;
-		reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
deleted file mode 100644
index 5979209fe91ef..0000000000000
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ /dev/null
@@ -1,781 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2015 Endless Mobile, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#include <dt-bindings/clock/meson8-ddr-clkc.h>
-#include <dt-bindings/clock/meson8b-clkc.h>
-#include <dt-bindings/gpio/meson8b-gpio.h>
-#include <dt-bindings/power/meson8-power.h>
-#include <dt-bindings/reset/amlogic,meson8b-reset.h>
-#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
-#include <dt-bindings/thermal/thermal.h>
-#include "meson.dtsi"
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			next-level-cache = <&L2>;
-			reg = <0x200>;
-			enable-method = "amlogic,meson8b-smp";
-			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
-			operating-points-v2 = <&cpu_opp_table>;
-			clocks = <&clkc CLKID_CPUCLK>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu1: cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			next-level-cache = <&L2>;
-			reg = <0x201>;
-			enable-method = "amlogic,meson8b-smp";
-			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
-			operating-points-v2 = <&cpu_opp_table>;
-			clocks = <&clkc CLKID_CPUCLK>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu2: cpu@202 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			next-level-cache = <&L2>;
-			reg = <0x202>;
-			enable-method = "amlogic,meson8b-smp";
-			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
-			operating-points-v2 = <&cpu_opp_table>;
-			clocks = <&clkc CLKID_CPUCLK>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu3: cpu@203 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			next-level-cache = <&L2>;
-			reg = <0x203>;
-			enable-method = "amlogic,meson8b-smp";
-			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
-			operating-points-v2 = <&cpu_opp_table>;
-			clocks = <&clkc CLKID_CPUCLK>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	cpu_opp_table: opp-table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-96000000 {
-			opp-hz = /bits/ 64 <96000000>;
-			opp-microvolt = <860000>;
-		};
-		opp-192000000 {
-			opp-hz = /bits/ 64 <192000000>;
-			opp-microvolt = <860000>;
-		};
-		opp-312000000 {
-			opp-hz = /bits/ 64 <312000000>;
-			opp-microvolt = <860000>;
-		};
-		opp-408000000 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <860000>;
-		};
-		opp-504000000 {
-			opp-hz = /bits/ 64 <504000000>;
-			opp-microvolt = <860000>;
-		};
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <860000>;
-		};
-		opp-720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <860000>;
-		};
-		opp-816000000 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-1008000000 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <1140000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1140000>;
-		};
-		opp-1320000000 {
-			opp-hz = /bits/ 64 <1320000000>;
-			opp-microvolt = <1140000>;
-		};
-		opp-1488000000 {
-			opp-hz = /bits/ 64 <1488000000>;
-			opp-microvolt = <1140000>;
-		};
-		opp-1536000000 {
-			opp-hz = /bits/ 64 <1536000000>;
-			opp-microvolt = <1140000>;
-		};
-	};
-
-	gpu_opp_table: opp-table-gpu {
-		compatible = "operating-points-v2";
-
-		opp-255000000 {
-			opp-hz = /bits/ 64 <255000000>;
-			opp-microvolt = <1100000>;
-		};
-		opp-364285714 {
-			opp-hz = /bits/ 64 <364285714>;
-			opp-microvolt = <1100000>;
-		};
-		opp-425000000 {
-			opp-hz = /bits/ 64 <425000000>;
-			opp-microvolt = <1100000>;
-		};
-		opp-510000000 {
-			opp-hz = /bits/ 64 <510000000>;
-			opp-microvolt = <1100000>;
-		};
-		opp-637500000 {
-			opp-hz = /bits/ 64 <637500000>;
-			opp-microvolt = <1100000>;
-			turbo-mode;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a5-pmu";
-		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* 2 MiB reserved for Hardware ROM Firmware? */
-		hwrom@0 {
-			reg = <0x0 0x200000>;
-			no-map;
-		};
-	};
-
-	thermal-zones {
-		soc {
-			polling-delay-passive = <250>; /* milliseconds */
-			polling-delay = <1000>; /* milliseconds */
-			thermal-sensors = <&thermal_sensor>;
-
-			cooling-maps {
-				map0 {
-					trip = <&soc_passive>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-
-				map1 {
-					trip = <&soc_hot>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-
-			trips {
-				soc_passive: soc-passive {
-					temperature = <80000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "passive";
-				};
-
-				soc_hot: soc-hot {
-					temperature = <90000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "hot";
-				};
-
-				soc_critical: soc-critical {
-					temperature = <110000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	mmcbus: bus@c8000000 {
-		compatible = "simple-bus";
-		reg = <0xc8000000 0x8000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0xc8000000 0x8000>;
-
-		ddr_clkc: clock-controller@400 {
-			compatible = "amlogic,meson8b-ddr-clkc";
-			reg = <0x400 0x20>;
-			clocks = <&xtal>;
-			clock-names = "xtal";
-			#clock-cells = <1>;
-		};
-
-		dmcbus: bus@6000 {
-			compatible = "simple-bus";
-			reg = <0x6000 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6000 0x400>;
-
-			canvas: video-lut@48 {
-				compatible = "amlogic,meson8b-canvas",
-					     "amlogic,canvas";
-				reg = <0x48 0x14>;
-			};
-		};
-	};
-
-	apb: bus@d0000000 {
-		compatible = "simple-bus";
-		reg = <0xd0000000 0x200000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0xd0000000 0x200000>;
-
-		mali: gpu@c0000 {
-			compatible = "amlogic,meson8b-mali", "arm,mali-450";
-			reg = <0xc0000 0x40000>;
-			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gp", "gpmmu", "pp", "pmu",
-					  "pp0", "ppmmu0", "pp1", "ppmmu1";
-			resets = <&reset RESET_MALI>;
-			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
-			clock-names = "bus", "core";
-			operating-points-v2 = <&gpu_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-}; /* end of / */
-
-&aiu {
-	compatible = "amlogic,aiu-meson8b", "amlogic,aiu";
-	clocks = <&clkc CLKID_AIU_GLUE>,
-		 <&clkc CLKID_I2S_OUT>,
-		 <&clkc CLKID_AOCLK_GATE>,
-		 <&clkc CLKID_CTS_AMCLK>,
-		 <&clkc CLKID_MIXER_IFACE>,
-		 <&clkc CLKID_IEC958>,
-		 <&clkc CLKID_IEC958_GATE>,
-		 <&clkc CLKID_CTS_MCLK_I958>,
-		 <&clkc CLKID_CTS_I958>;
-	clock-names = "pclk",
-		      "i2s_pclk",
-		      "i2s_aoclk",
-		      "i2s_mclk",
-		      "i2s_mixer",
-		      "spdif_pclk",
-		      "spdif_aoclk",
-		      "spdif_mclk",
-		      "spdif_mclk_sel";
-	resets = <&reset RESET_AIU>;
-};
-
-&aobus {
-	pmu: pmu@e0 {
-		compatible = "amlogic,meson8b-pmu", "syscon";
-		reg = <0xe0 0x18>;
-	};
-
-	pinctrl_aobus: pinctrl@84 {
-		compatible = "amlogic,meson8b-aobus-pinctrl";
-		reg = <0x84 0xc>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio_ao: ao-bank@14 {
-			reg = <0x14 0x4>,
-				<0x2c 0x4>,
-				<0x24 0x8>;
-			reg-names = "mux", "pull", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_aobus 0 0 16>;
-		};
-
-		i2s_am_clk_pins: i2s-am-clk-out {
-			mux {
-				groups = "i2s_am_clk_out";
-				function = "i2s";
-				bias-disable;
-			};
-		};
-
-		i2s_out_ao_clk_pins: i2s-ao-clk-out {
-			mux {
-				groups = "i2s_ao_clk_out";
-				function = "i2s";
-				bias-disable;
-			};
-		};
-
-		i2s_out_lr_clk_pins: i2s-lr-clk-out {
-			mux {
-				groups = "i2s_lr_clk_out";
-				function = "i2s";
-				bias-disable;
-			};
-		};
-
-		i2s_out_ch01_ao_pins: i2s-out-ch01 {
-			mux {
-				groups = "i2s_out_01";
-				function = "i2s";
-				bias-disable;
-			};
-		};
-
-		spdif_out_1_pins: spdif-out-1 {
-			mux {
-				groups = "spdif_out_1";
-				function = "spdif_1";
-				bias-disable;
-			};
-		};
-
-		uart_ao_a_pins: uart_ao_a {
-			mux {
-				groups = "uart_tx_ao_a", "uart_rx_ao_a";
-				function = "uart_ao";
-				bias-disable;
-			};
-		};
-
-		ir_recv_pins: remote {
-			mux {
-				groups = "remote_input";
-				function = "remote";
-				bias-disable;
-			};
-		};
-	};
-};
-
-&ao_arc_rproc {
-	compatible = "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
-	amlogic,secbus2 = <&secbus2>;
-	sram = <&ao_arc_sram>;
-	resets = <&reset RESET_MEDIA_CPU>;
-	clocks = <&clkc CLKID_AO_MEDIA_CPU>;
-};
-
-&cbus {
-	reset: reset-controller@4404 {
-		compatible = "amlogic,meson8b-reset";
-		reg = <0x4404 0x9c>;
-		#reset-cells = <1>;
-	};
-
-	analog_top: analog-top@81a8 {
-		compatible = "amlogic,meson8b-analog-top", "syscon";
-		reg = <0x81a8 0x14>;
-	};
-
-	pwm_ef: pwm@86c0 {
-		compatible = "amlogic,meson8b-pwm";
-		reg = <0x86c0 0x10>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	clock-measure@8758 {
-		compatible = "amlogic,meson8b-clk-measure";
-		reg = <0x8758 0x1c>;
-	};
-
-	pinctrl_cbus: pinctrl@9880 {
-		compatible = "amlogic,meson8b-cbus-pinctrl";
-		reg = <0x9880 0x10>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio: banks@80b0 {
-			reg = <0x80b0 0x28>,
-				<0x80e8 0x18>,
-				<0x8120 0x18>,
-				<0x8030 0x38>;
-			reg-names = "mux", "pull", "pull-enable", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_cbus 0 0 83>;
-		};
-
-		eth_rgmii_pins: eth-rgmii {
-			mux {
-				groups = "eth_tx_clk",
-					 "eth_tx_en",
-					 "eth_txd1_0",
-					 "eth_txd0_0",
-					 "eth_rx_clk",
-					 "eth_rx_dv",
-					 "eth_rxd1",
-					 "eth_rxd0",
-					 "eth_mdio_en",
-					 "eth_mdc",
-					 "eth_ref_clk",
-					 "eth_txd2",
-					 "eth_txd3",
-					 "eth_rxd3",
-					 "eth_rxd2";
-				function = "ethernet";
-				bias-disable;
-			};
-		};
-
-		eth_rmii_pins: eth-rmii {
-			mux {
-				groups = "eth_tx_en",
-					 "eth_txd1_0",
-					 "eth_txd0_0",
-					 "eth_rx_clk",
-					 "eth_rx_dv",
-					 "eth_rxd1",
-					 "eth_rxd0",
-					 "eth_mdio_en",
-					 "eth_mdc";
-				function = "ethernet";
-				bias-disable;
-			};
-		};
-
-		i2c_a_pins: i2c-a {
-			mux {
-				groups = "i2c_sda_a", "i2c_sck_a";
-				function = "i2c_a";
-				bias-disable;
-			};
-		};
-
-		sd_b_pins: sd-b {
-			mux {
-				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
-					"sd_d3_b", "sd_clk_b", "sd_cmd_b";
-				function = "sd_b";
-				bias-disable;
-			};
-		};
-
-		sdxc_c_pins: sdxc-c {
-			mux {
-				groups = "sdxc_d0_c", "sdxc_d13_c",
-					 "sdxc_d47_c", "sdxc_clk_c",
-					 "sdxc_cmd_c";
-				function = "sdxc_c";
-				bias-pull-up;
-			};
-		};
-
-		pwm_c1_pins: pwm-c1 {
-			mux {
-				groups = "pwm_c1";
-				function = "pwm_c";
-				bias-disable;
-			};
-		};
-
-		pwm_d_pins: pwm-d {
-			mux {
-				groups = "pwm_d";
-				function = "pwm_d";
-				bias-disable;
-			};
-		};
-
-		uart_b0_pins: uart-b0 {
-			mux {
-				groups = "uart_tx_b0",
-				       "uart_rx_b0";
-				function = "uart_b";
-				bias-disable;
-			};
-		};
-
-		uart_b0_cts_rts_pins: uart-b0-cts-rts {
-			mux {
-				groups = "uart_cts_b0",
-				       "uart_rts_b0";
-				function = "uart_b";
-				bias-disable;
-			};
-		};
-	};
-};
-
-&ahb_sram {
-	ao_arc_sram: ao-arc-sram@0 {
-		compatible = "amlogic,meson8b-ao-arc-sram";
-		reg = <0x0 0x8000>;
-		pool;
-	};
-
-	smp-sram@1ff80 {
-		compatible = "amlogic,meson8b-smp-sram";
-		reg = <0x1ff80 0x8>;
-	};
-};
-
-
-&efuse {
-	compatible = "amlogic,meson8b-efuse";
-	clocks = <&clkc CLKID_EFUSE>;
-	clock-names = "core";
-
-	temperature_calib: calib@1f4 {
-		/* only the upper two bytes are relevant */
-		reg = <0x1f4 0x4>;
-	};
-};
-
-&ethmac {
-	compatible = "amlogic,meson8b-dwmac", "snps,dwmac-3.70a", "snps,dwmac";
-
-	reg = <0xc9410000 0x10000
-	       0xc1108140 0x4>;
-
-	clocks = <&clkc CLKID_ETH>,
-		 <&clkc CLKID_MPLL2>,
-		 <&clkc CLKID_MPLL2>,
-		 <&clkc CLKID_FCLK_DIV2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
-	rx-fifo-depth = <4096>;
-	tx-fifo-depth = <2048>;
-
-	resets = <&reset RESET_ETHERNET>;
-	reset-names = "stmmaceth";
-
-	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
-};
-
-&gpio_intc {
-	compatible = "amlogic,meson8b-gpio-intc",
-		     "amlogic,meson-gpio-intc";
-	status = "okay";
-};
-
-&hhi {
-	clkc: clock-controller {
-		compatible = "amlogic,meson8b-clkc";
-		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
-		clock-names = "xtal", "ddr_pll";
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	pwrc: power-controller {
-		compatible = "amlogic,meson8b-pwrc";
-		#power-domain-cells = <1>;
-		amlogic,ao-sysctrl = <&pmu>;
-		resets = <&reset RESET_DBLK>,
-			 <&reset RESET_PIC_DC>,
-			 <&reset RESET_HDMI_APB>,
-			 <&reset RESET_HDMI_SYSTEM_RESET>,
-			 <&reset RESET_VENCI>,
-			 <&reset RESET_VENCP>,
-			 <&reset RESET_VDAC_4>,
-			 <&reset RESET_VENCL>,
-			 <&reset RESET_VIU>,
-			 <&reset RESET_VENC>,
-			 <&reset RESET_RDMA>;
-		reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system",
-			      "venci", "vencp", "vdac", "vencl", "viu",
-			      "venc", "rdma";
-		clocks = <&clkc CLKID_VPU>;
-		clock-names = "vpu";
-		assigned-clocks = <&clkc CLKID_VPU>;
-		assigned-clock-rates = <182142857>;
-	};
-};
-
-&hwrng {
-	compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
-	clocks = <&clkc CLKID_RNG0>;
-	clock-names = "core";
-};
-
-&i2c_AO {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&i2c_A {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_B {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&L2 {
-	arm,data-latency = <3 3 3>;
-	arm,tag-latency = <2 2 2>;
-	arm,filter-ranges = <0x100000 0xc0000000>;
-	prefetch-data = <1>;
-	prefetch-instr = <1>;
-	arm,prefetch-offset = <7>;
-	arm,double-linefill = <1>;
-	arm,prefetch-drop = <1>;
-	arm,shared-override;
-};
-
-&periph {
-	scu@0 {
-		compatible = "arm,cortex-a5-scu";
-		reg = <0x0 0x100>;
-	};
-
-	timer@200 {
-		compatible = "arm,cortex-a5-global-timer";
-		reg = <0x200 0x20>;
-		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-		clocks = <&clkc CLKID_PERIPH>;
-
-		/*
-		 * the arm_global_timer driver currently does not handle clock
-		 * rate changes. Keep it disabled for now.
-		 */
-		status = "disabled";
-	};
-
-	timer@600 {
-		compatible = "arm,cortex-a5-twd-timer";
-		reg = <0x600 0x20>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-		clocks = <&clkc CLKID_PERIPH>;
-	};
-};
-
-&pwm_ab {
-	compatible = "amlogic,meson8b-pwm";
-};
-
-&pwm_cd {
-	compatible = "amlogic,meson8b-pwm";
-};
-
-&rtc {
-	compatible = "amlogic,meson8b-rtc";
-	resets = <&reset RESET_RTC>;
-};
-
-&saradc {
-	compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
-	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
-	clock-names = "clkin", "core";
-	amlogic,hhi-sysctrl = <&hhi>;
-	nvmem-cells = <&temperature_calib>;
-	nvmem-cell-names = "temperature_calib";
-};
-
-&sdhc {
-	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
-	clocks = <&xtal>,
-		 <&clkc CLKID_FCLK_DIV4>,
-		 <&clkc CLKID_FCLK_DIV3>,
-		 <&clkc CLKID_FCLK_DIV5>,
-		 <&clkc CLKID_SDHC>;
-	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
-};
-
-&secbus {
-	secbus2: system-controller@4000 {
-		compatible = "amlogic,meson8b-secbus2", "syscon";
-		reg = <0x4000 0x2000>;
-	};
-};
-
-&sdio {
-	compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
-	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
-	clock-names = "core", "clkin";
-};
-
-&timer_abcde {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "xtal", "pclk";
-};
-
-&uart_AO {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_A {
-	compatible = "amlogic,meson8b-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_B {
-	compatible = "amlogic,meson8b-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_C {
-	compatible = "amlogic,meson8b-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&usb0 {
-	compatible = "amlogic,meson8b-usb", "snps,dwc2";
-	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
-	clock-names = "otg";
-};
-
-&usb1 {
-	compatible = "amlogic,meson8b-usb", "snps,dwc2";
-	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
-	clock-names = "otg";
-};
-
-&usb0_phy {
-	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
-	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
-	clock-names = "usb_general", "usb";
-	resets = <&reset RESET_USB_OTG>;
-};
-
-&usb1_phy {
-	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
-	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
-	clock-names = "usb_general", "usb";
-	resets = <&reset RESET_USB_OTG>;
-};
-
-&wdt {
-	compatible = "amlogic,meson8b-wdt";
-};
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
deleted file mode 100644
index aa4d4bf706296..0000000000000
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ /dev/null
@@ -1,293 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Oleg Ivanov <balbes-150@yandex.ru>
- * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
- */
-
-/dts-v1/;
-
-#include "meson8m2.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Tronsmart MXIII Plus";
-	compatible = "tronsmart,mxiii-plus", "amlogic,meson8m2";
-
-	aliases {
-		ethernet0 = &ethmac;
-		i2c0 = &i2c_AO;
-		serial0 = &uart_AO;
-		mmc0 = &sd_card_slot;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1710000>;
-
-		button-function {
-			label = "Function";
-			linux,code = <KEY_FN>;
-			press-threshold-microvolt = <10000>;
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		pinctrl-0 = <&xtal_32k_out_pins>;
-		pinctrl-names = "default";
-
-		reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>,
-			      <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>;
-
-		clocks = <&xtal_32k_out>;
-		clock-names = "ext_clock";
-	};
-
-	vcc_3v3: regulator-vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	xtal_32k_out: xtal-32k-out-clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "xtal_32k_out";
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&vcck>;
-};
-
-&ethmac {
-	status = "okay";
-
-	pinctrl-0 = <&eth_rgmii_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&eth_phy0>;
-	phy-mode = "rgmii-id";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		eth_phy0: ethernet-phy@0 {
-			/* Realtek RTL8211F (0x001cc916) */
-			reg = <0>;
-
-			reset-assert-us = <10000>;
-			reset-deassert-us = <80000>;
-			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&ir_receiver {
-	status = "okay";
-	pinctrl-0 = <&ir_recv_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c_AO {
-	status = "okay";
-	pinctrl-0 = <&i2c_ao_pins>;
-	pinctrl-names = "default";
-
-	pmic@32 {
-		compatible = "ricoh,rn5t618";
-		reg = <0x32>;
-		system-power-controller;
-
-		regulators {
-			vcck: DCDC1 {
-				regulator-name = "VCCK";
-				regulator-min-microvolt = <825000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vddee: DCDC2 {
-				/* the output is also used as VDDAO */
-				regulator-name = "VDD_EE";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			DCDC3 {
-				regulator-name = "VDD_DDR";
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			LDO1 {
-				regulator-name = "VDDIO_AO28";
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <2900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vddio_ao1v8: LDO2 {
-				regulator-name = "VDDIO_AO18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			LDO3 {
-				regulator-name = "VCC1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			LDO4 {
-				regulator-name = "VCC2V8";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			LDO5 {
-				regulator-name = "AVDD1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			LDORTC1 {
-				regulator-name = "VDD_LDO";
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2700000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			LDORTC2 {
-				regulator-name = "RTC_0V9";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&mali {
-	mali-supply = <&vddee>;
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vddio_ao1v8>;
-};
-
-/* SDIO wifi */
-&sdhc {
-	status = "okay";
-
-	pinctrl-0 = <&sdxc_a_pins>;
-	pinctrl-names = "default";
-
-	bus-width = <4>;
-	max-frequency = <50000000>;
-
-	disable-wp;
-	non-removable;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-
-	mmc-pwrseq = <&sdio_pwrseq>;
-
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vcc_3v3>;
-};
-
-&sdio {
-	status = "okay";
-
-	pinctrl-0 = <&sd_b_pins>;
-	pinctrl-names = "default";
-
-	/* SD card */
-	sd_card_slot: slot@1 {
-		compatible = "mmc-slot";
-		reg = <1>;
-		status = "okay";
-
-		bus-width = <4>;
-		no-sdio;
-		cap-mmc-highspeed;
-		cap-sd-highspeed;
-		disable-wp;
-
-		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
-		vmmc-supply = <&vcc_3v3>;
-	};
-};
-
-/* connected to the Bluetooth module */
-&uart_A {
-	status = "okay";
-	pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
-	bluetooth {
-		compatible = "brcm,bcm20702a1";
-		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
-		max-speed = <2000000>;
-	};
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi
deleted file mode 100644
index 6725dd9fd825c..0000000000000
--- a/arch/arm/boot/dts/meson8m2.dtsi
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
- */
-
-#include "meson8.dtsi"
-
-/ {
-	model = "Amlogic Meson8m2 SoC";
-	compatible = "amlogic,meson8m2";
-}; /* end of / */
-
-&clkc {
-	compatible = "amlogic,meson8m2-clkc", "amlogic,meson8-clkc";
-};
-
-&dmcbus {
-	/* the offset of the canvas registers has changed compared to Meson8 */
-	/delete-node/ video-lut@20;
-
-	canvas: video-lut@48 {
-		compatible = "amlogic,meson8m2-canvas", "amlogic,canvas";
-		reg = <0x48 0x14>;
-	};
-};
-
-&ethmac {
-	compatible = "amlogic,meson8m2-dwmac", "snps,dwmac";
-	reg = <0xc9410000 0x10000
-		0xc1108140 0x8>;
-	clocks = <&clkc CLKID_ETH>,
-		 <&clkc CLKID_MPLL2>,
-		 <&clkc CLKID_MPLL2>,
-		 <&clkc CLKID_FCLK_DIV2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
-	resets = <&reset RESET_ETHERNET>;
-	reset-names = "stmmaceth";
-};
-
-&pinctrl_aobus {
-	compatible = "amlogic,meson8m2-aobus-pinctrl",
-		     "amlogic,meson8-aobus-pinctrl";
-};
-
-&pinctrl_cbus {
-	compatible = "amlogic,meson8m2-cbus-pinctrl",
-		     "amlogic,meson8-cbus-pinctrl";
-
-	eth_rgmii_pins: ethernet {
-		mux {
-			groups = "eth_tx_clk_50m", "eth_tx_en",
-				 "eth_txd3", "eth_txd2",
-				 "eth_txd1", "eth_txd0",
-				 "eth_rx_clk_in", "eth_rx_dv",
-				 "eth_rxd3", "eth_rxd2",
-				 "eth_rxd1", "eth_rxd0",
-				 "eth_mdio", "eth_mdc";
-			function = "ethernet";
-			bias-disable;
-		};
-	};
-};
-
-&pwrc {
-	compatible = "amlogic,meson8m2-pwrc";
-	resets = <&reset RESET_DBLK>,
-		 <&reset RESET_PIC_DC>,
-		 <&reset RESET_HDMI_APB>,
-		 <&reset RESET_HDMI_SYSTEM_RESET>,
-		 <&reset RESET_VENCI>,
-		 <&reset RESET_VENCP>,
-		 <&reset RESET_VDAC_4>,
-		 <&reset RESET_VENCL>,
-		 <&reset RESET_VIU>,
-		 <&reset RESET_VENC>,
-		 <&reset RESET_RDMA>;
-	reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system", "venci",
-		      "vencp", "vdac", "vencl", "viu", "venc", "rdma";
-	assigned-clocks = <&clkc CLKID_VPU>;
-	assigned-clock-rates = <364000000>;
-};
-
-&saradc {
-	compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc";
-};
-
-&sdhc {
-	compatible = "amlogic,meson8m2-sdhc", "amlogic,meson-mx-sdhc";
-};
-
-&usb0_phy {
-	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
-};
-
-&usb1_phy {
-	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
-};
-
-&wdt {
-	compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt";
-};
diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile
new file mode 100644
index 0000000000000..0f5193d05a31c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/Makefile
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0
+DTC_FLAGS_at91-sam9x60_curiosity := -@
+DTC_FLAGS_at91-sam9x60ek := -@
+DTC_FLAGS_at91-sama5d27_som1_ek := -@
+DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@
+DTC_FLAGS_at91-sama5d2_icp := -@
+DTC_FLAGS_at91-sama5d2_ptc_ek := -@
+DTC_FLAGS_at91-sama5d2_xplained := -@
+DTC_FLAGS_at91-sama5d3_eds := -@
+DTC_FLAGS_at91-sama5d3_xplained := -@
+DTC_FLAGS_at91-sama5d4_xplained := -@
+DTC_FLAGS_at91-sama7g5ek := -@
+dtb-$(CONFIG_SOC_AT91RM9200) += \
+	at91rm9200ek.dtb \
+	mpa1600.dtb
+dtb-$(CONFIG_SOC_AT91SAM9) += \
+	animeo_ip.dtb \
+	at91-qil_a9260.dtb \
+	aks-cdu.dtb \
+	ethernut5.dtb \
+	evk-pro3.dtb \
+	tny_a9260.dtb \
+	usb_a9260.dtb \
+	at91sam9260ek.dtb \
+	at91sam9261ek.dtb \
+	at91sam9263ek.dtb \
+	at91-sam9_l9260.dtb \
+	tny_a9263.dtb \
+	usb_a9263.dtb \
+	at91-foxg20.dtb \
+	at91-kizbox.dtb \
+	at91-lmu5000.dtb \
+	at91sam9g20ek.dtb \
+	at91sam9g20ek_2mmc.dtb \
+	tny_a9g20.dtb \
+	usb_a9g20.dtb \
+	usb_a9g20_lpw.dtb \
+	at91sam9m10g45ek.dtb \
+	pm9g45.dtb \
+	at91sam9n12ek.dtb \
+	at91sam9rlek.dtb \
+	at91-ariag25.dtb \
+	at91-ariettag25.dtb \
+	at91-cosino_mega2560.dtb \
+	at91-kizboxmini-base.dtb \
+	at91-kizboxmini-mb.dtb \
+	at91-kizboxmini-rd.dtb \
+	at91-q5xr5.dtb \
+	at91-smartkiz.dtb \
+	at91-wb45n.dtb \
+	at91sam9g15ek.dtb \
+	at91sam9g25-gardena-smart-gateway.dtb \
+	at91sam9g25ek.dtb \
+	at91sam9g35ek.dtb \
+	at91sam9x25ek.dtb \
+	at91sam9x35ek.dtb
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sam9x60_curiosity := -@
+DTC_FLAGS_at91-sam9x60ek := -@
+dtb-$(CONFIG_SOC_SAM9X60) += \
+	at91-sam9x60_curiosity.dtb \
+	at91-sam9x60ek.dtb
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sama5d27_som1_ek := -@
+DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@
+DTC_FLAGS_at91-sama5d2_icp := -@
+DTC_FLAGS_at91-sama5d2_ptc_ek := -@
+DTC_FLAGS_at91-sama5d2_xplained := -@
+DTC_FLAGS_at91-sama5d3_eds := -@
+DTC_FLAGS_at91-sama5d3_xplained := -@
+DTC_FLAGS_at91-sama5d4_xplained := -@
+dtb-$(CONFIG_SOC_SAM_V7) += \
+	at91-kizbox2-2.dtb \
+	at91-kizbox3-hs.dtb \
+	at91-nattis-2-natte-2.dtb \
+	at91-sama5d27_som1_ek.dtb \
+	at91-sama5d27_wlsom1_ek.dtb \
+	at91-sama5d2_icp.dtb \
+	at91-sama5d2_ptc_ek.dtb \
+	at91-sama5d2_xplained.dtb \
+	at91-sama5d3_eds.dtb \
+	at91-sama5d3_ksz9477_evb.dtb \
+	at91-sama5d3_xplained.dtb \
+	at91-dvk_som60.dtb \
+	at91-gatwick.dtb \
+	at91-tse850-3.dtb \
+	at91-wb50n.dtb \
+	sama5d31ek.dtb \
+	sama5d33ek.dtb \
+	sama5d34ek.dtb \
+	sama5d35ek.dtb \
+	sama5d36ek.dtb \
+	sama5d36ek_cmp.dtb \
+	at91-sama5d4_ma5d4evk.dtb \
+	at91-sama5d4_xplained.dtb \
+	at91-sama5d4ek.dtb \
+	at91-vinco.dtb
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sama7g5ek := -@
+dtb-$(CONFIG_SOC_SAMA7G5) += \
+	at91-sama7g5ek.dtb
+
+dtb-$(CONFIG_SOC_LAN966) += \
+	lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
+	lan966x-kontron-kswitch-d10-mmt-8g.dtb \
+	lan966x-pcb8290.dtb \
+	lan966x-pcb8291.dtb \
+	lan966x-pcb8309.dtb
diff --git a/arch/arm/boot/dts/microchip/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts
new file mode 100644
index 0000000000000..742fcf525e1b7
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/aks-cdu.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * aks-cdu.dts - Device Tree file for AK signal CDU
+ *
+ * Copyright (C) 2012 AK signal Brno a.s.
+ *               2012 Jiri Prchal <jiri.prchal@aksignal.cz>
+ */
+
+/dts-v1/;
+
+#include "ge863-pro3.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+	};
+
+	ahb {
+		apb {
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+				};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			nand_controller: nand-controller {
+				nand: nand@3 {
+					partitions {
+						bootstrap@0 {
+							label = "bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						uboot@40000 {
+							label = "uboot";
+							reg = <0x40000 0x80000>;
+						};
+
+						ubootenv@c0000 {
+							label = "ubootenv";
+							reg = <0xc0000 0x40000>;
+						};
+
+						kernel@100000 {
+							label = "kernel";
+							reg = <0x100000 0x400000>;
+						};
+
+						rootfs@500000 {
+							label = "rootfs";
+							reg = <0x500000 0x7b00000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		green {
+			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+
+		yellow {
+			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		blue {
+			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts
new file mode 100644
index 0000000000000..29936bfbeeb7e
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/animeo_ip.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Somfy Animeo IP";
+	compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
+
+	aliases {
+		serial0 = &usart1;
+		serial1 = &usart2;
+		serial2 = &usart0;
+		serial3 = &dbgu;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	chosen {
+		stdout-path = &usart2;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				pinctrl-0 = <&pinctrl_usart2>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
+				phy-mode = "mii";
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <&pinctrl_mmc0_clk
+					     &pinctrl_mmc0_slot1_cmd_dat0
+					     &pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						barebox@0 {
+							label = "barebox";
+							reg = <0x0 0x58000>;
+						};
+
+						u_boot_env@58000 {
+							label = "u_boot_env";
+							reg = <0x58000 0x8000>;
+						};
+
+						ubi@60000 {
+							label = "ubi";
+							reg = <0x60000 0x1FA0000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_green {
+			label = "power_green";
+			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		power_red {
+			label = "power_red";
+			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		tx_green {
+			label = "tx_green";
+			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		tx_red {
+			label = "tx_red";
+			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-switch-in {
+			label = "keyswitch_in";
+			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+
+		key-error-in {
+			label = "error_in";
+			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <29>;
+			wakeup-source;
+		};
+
+		key-s {
+			label = "btn";
+			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
+			linux,code = <31>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-ariag25.dts b/arch/arm/boot/dts/microchip/at91-ariag25.dts
new file mode 100644
index 0000000000000..713d18f803568
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-ariag25.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based)
+ *
+ * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>,
+ *                    Robert Nelson <robertcnelson@gmail.com>
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Acme Systems Aria G25";
+	compatible = "acme,ariag25", "atmel,at91sam9x5ek",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	aliases {
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	memory@20000000 {
+		/* 128 MB, change this for 256 MB revision */
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* little green LED in middle of Aria G25 module */
+		aria_led {
+			label = "aria_led";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
+			linux,default-trigger = "heartbeat";
+		};
+
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_w1_0>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	atmel,adc-channels-used = <0xf>;
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+/* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
+
+&macb0 {
+	phy-mode = "rmii";
+	/*
+	 * following can be overwritten by bootloader:
+	 * for example u-boot 'ftd set' command
+	 */
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+};
+
+
+&mmc0 {
+	/* N.B. Aria has no SD card detect (CD), assumed present */
+
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl {
+	w1_0 {
+		pinctrl_w1_0: w1_0-0 {
+			atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+/*
+ * UART0/1 pins are marked as GPIO on
+ * Aria documentation.
+ * Change to "okay" if you need additional serial ports
+ */
+&uart0 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&usart0 {
+	pinctrl-0 = <&pinctrl_usart0
+		     &pinctrl_usart0_rts
+		     &pinctrl_usart0_cts>;
+	status = "okay";
+};
+
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1
+		     /* &pinctrl_usart1_rts */
+		     /* &pinctrl_usart1_cts */
+		    >;
+	status = "okay";
+};
+
+&usart2 {
+	/* cannot activate RTS2+CTS2, clash with
+	 * ethernet on PB0 and PB1 */
+	pinctrl-0 = <&pinctrl_usart2>;
+	status = "okay";
+};
+
+&usart3 {
+	compatible = "atmel,at91sam9260-usart";
+	reg = <0xf8028000 0x200>;
+	interrupts = <8 4 5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart3
+		     /* &pinctrl_usart3_rts */
+		     /* &pinctrl_usart3_cts */
+		    >;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	num-ports = <3>;
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-ariettag25.dts b/arch/arm/boot/dts/microchip/at91-ariettag25.dts
new file mode 100644
index 0000000000000..2c52a71752c2d
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-ariettag25.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Arietta G25
+ * This device tree is minimal, to activate more peripherals, see:
+ * http://dts.acmesystems.it/arietta/
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Acme Systems Arietta G25";
+	compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		arietta_led {
+			label = "arietta_led";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	num-ports = <3>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-cosino.dtsi b/arch/arm/boot/dts/microchip/at91-cosino.dtsi
new file mode 100644
index 0000000000000..ee0f5da6d8197
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-cosino.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-cosino.dtsi - Device Tree file for Cosino core module
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9x5ek.dtsi by:
+ *	Copyright (C) 2012 Atmel,
+ *	2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include "at91sam9g35.dtsi"
+
+/ {
+	model = "HCE Cosino core module";
+	compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+		     &pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand-controller {
+		pinctrl-0 = <&pinctrl_nand_oe_we
+			     &pinctrl_nand_cs
+			     &pinctrl_nand_rb>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0x80000>;
+				};
+
+				ubootenv@c0000 {
+					label = "U-Boot Env";
+					reg = <0xc0000 0x140000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0f800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc0
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	mmc0 {
+		pinctrl_board_mmc0: mmc0-board {
+			atmel,pins =
+				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+		};
+	};
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts b/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts
new file mode 100644
index 0000000000000..04cb7bee937d3
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
+ *			      Mega 2560 extension
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9g35ek.dts by:
+ * 	Copyright (C) 2012 Atmel,
+ *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+/dts-v1/;
+#include "at91-cosino.dtsi"
+
+/ {
+	model = "HCE Cosino Mega 2560";
+	compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-0 = <
+		&pinctrl_mmc1_slot0_clk_cmd_dat0
+		&pinctrl_mmc1_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		non-removable;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
+			   &pioD 19 GPIO_ACTIVE_LOW
+			   &pioD 20 GPIO_ACTIVE_LOW
+			  >;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-dvk_som60.dts b/arch/arm/boot/dts/microchip/at91-dvk_som60.dts
new file mode 100644
index 0000000000000..ededd5b0d27bc
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-dvk_som60.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+/dts-v1/;
+#include "at91-som60.dtsi"
+#include "at91-dvk_su60_somc.dtsi"
+#include "at91-dvk_su60_somc_lcm.dtsi"
+
+/ {
+	model = "Laird DVK SOM60";
+	compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+		tick-timer = &pit;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&ssc0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi
new file mode 100644
index 0000000000000..3542ad8a243ea
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+		atmel,model = "wm8904 @ DVK-SOM60";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "okay";
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	slot@0 {
+		bus-width = <4>;
+		cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
+	flash@0 {
+		compatible = "mxicy,mx25u4035", "jedec,spi-nor";
+		spi-max-frequency = <33000000>;
+		reg = <0>;
+	};
+};
+
+&ssc0 {
+	atmel,clk-from-rk-pin;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	wm8904: wm8904@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 10>;
+		clock-names = "mclk";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "giantec,gt24c32a", "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_geth_int>;
+		interrupt-parent = <&pioB>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		txen-skew-ps = <800>;
+		txc-skew-ps = <3000>;
+		rxdv-skew-ps = <400>;
+		rxc-skew-ps = <3000>;
+		rxd0-skew-ps = <400>;
+		rxd1-skew-ps = <400>;
+		rxd2-skew-ps = <400>;
+		rxd3-skew-ps = <400>;
+	};
+};
+
+&macb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@1 {
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth_int>;
+		interrupt-parent = <&pioC>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc_lcm.dtsi
new file mode 100644
index 0000000000000..bea920b192b65
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc_lcm.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel: panel {
+		compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92";
+		backlight = <&backlight>;
+		power-supply = <&vcc_lcd_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	vcc_lcd_reg: fixedregulator_lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC LCM";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_lcd_ctp_int: lcd_ctp_int {
+			 atmel,pins =
+				 <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	ft5426@38 {
+		compatible = "focaltech,ft5426", "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_ctp_int>;
+
+		interrupt-parent = <&pioC>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&hlcdc {
+	status = "okay";
+
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+		port@0 {
+			hlcdc_panel_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-foxg20.dts b/arch/arm/boot/dts/microchip/at91-foxg20.dts
new file mode 100644
index 0000000000000..9dfd5de808d18
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-foxg20.dts
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board
+ *
+ * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC)
+ *
+ * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "Acme Systems FoxG20";
+	compatible = "acme,foxg20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+			};
+
+			uart0: serial@fffd4000 {
+				status = "okay";
+			};
+
+			uart1: serial@fffd8000 {
+				status = "okay";
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_pck0_as_mck: pck0_as_mck {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* CD pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE	/* TWD (SDA), open drain */
+							 AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>;	/* TWCK (SCL), open drain */
+					};
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		i2c-gpio,delay-us = <5>;	/* ~85 kHz */
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* red LED marked "PC7" near mini USB (device) receptacle */
+		user_led {
+			label = "user_led";
+			gpios = <&pioC 7 GPIO_ACTIVE_HIGH>;	/* PC7 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button {
+			label = "Button";
+			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-gatwick.dts b/arch/arm/boot/dts/microchip/at91-gatwick.dts
new file mode 100644
index 0000000000000..551300fd77469
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-gatwick.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-gatwick.dts - Device Tree file for the Gatwick board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Project Gatwick";
+	compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_SETUP>;
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ethernet {
+			label = "gatwick:yellow:ethernet";
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-wifi {
+			label = "gatwick:green:wifi";
+			gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-ble {
+			label = "gatwick:blue:ble";
+			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-lora {
+			label = "gatwick:orange:lora";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-blank {
+			label = "gatwick:green:blank";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-user {
+			label = "gatwick:yellow:user";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_key_gpio: key_gpio_0 {
+		  atmel,pins =
+			  <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */
+	  };
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* FTDI USART */
+&usart0 {
+	status = "okay";
+};
+
+/* GPS USART */
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "semtech,sx1301";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+	/delete-property/atmel,oc-gpio;
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox.dts b/arch/arm/boot/dts/microchip/at91-kizbox.dts
new file mode 100644
index 0000000000000..307663b4eec25
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizbox.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
+ *
+ * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
+ *               2014-2015 Gaël PORTAY <g.portay@overkiz.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox";
+	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x2000000>;
+	};
+
+	clocks {
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "PB_RST";
+			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "pwm:green:network";
+			pwms = <&tcb1_pwm1 0 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			label = "pwm:red:network";
+			pwms = <&tcb1_pwm2 0 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-3 {
+			label = "pwm:green:user";
+			pwms = <&tcb1_pwm0 0 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-4 {
+			label = "pwm:red:user";
+			pwms = <&tcb1_pwm0 1 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>, <1>;
+	};
+
+	timer@2 {
+		compatible = "atmel,tcb-timer";
+		reg = <2>;
+	};
+};
+
+&tcb1 {
+	tcb1_pwm0: pwm@0 {
+		compatible = "atmel,tcb-pwm";
+		reg = <0>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa0 &pinctrl_tcb1_tiob0>;
+	};
+
+	tcb1_pwm1: pwm@1 {
+		compatible = "atmel,tcb-pwm";
+		reg = <1>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa1>;
+	};
+
+	tcb1_pwm2: pwm@2 {
+		compatible = "atmel,tcb-pwm";
+		reg = <2>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa2>;
+	};
+};
+
+&ebi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "soft";
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	pinctrl-0 = <&pinctrl_macb_rmii
+		     &pinctrl_macb_rmii_mii_alt>;
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	timeout-sec = <15>;
+	atmel,max-heartbeat-sec = <16>;
+	atmel,min-heartbeat-sec = <0>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&i2c_gpio0 {
+	status = "okay";
+
+	rtc: pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox2-2.dts b/arch/arm/boot/dts/microchip/at91-kizbox2-2.dts
new file mode 100644
index 0000000000000..cab8b3579efab
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizbox2-2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-2.dts - Device Tree file for the Kizbox2 with
+ * two head board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ *	    Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox 2 with two heads";
+	compatible = "overkiz,kizbox2-2", "atmel,sama5d31",
+		     "atmel,sama5d3", "atmel,sama5";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
new file mode 100644
index 0000000000000..e5e21dff882fb
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2_common.dtsi - Device Tree Include file for
+ * Overkiz Kizbox 2 family SoC
+ *
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ *          Gaël Portay <g.portay@overkiz.com>
+ *          Kévin Raymond <k.raymond@overkiz.com>
+ */
+#include "sama5d31.dtsi"
+
+/ {
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-prog {
+			label = "PB_PROG";
+			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		button-reset {
+			label = "PB_RST";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+		};
+
+		led-2 {
+			label = "pwm:green:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-3 {
+			label = "pwm:red:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic: act8865@5b {
+		compatible = "active-semi,act8865";
+		reg = <0x5b>;
+		status = "okay";
+
+		regulators {
+			vcc_1v8_reg: DCDC_REG1 {
+				regulator-name = "VCC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc_1v2_reg: DCDC_REG2 {
+				regulator-name = "VCC_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_3v3_reg: DCDC_REG3 {
+				regulator-name = "VCC_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vddfuse_reg: LDO_REG1 {
+				regulator-name = "FUSE_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			vddana_reg: LDO_REG2 {
+				regulator-name = "VDDANA";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vled_reg: LDO_REG3 {
+				regulator-name = "VLED";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			v3v8_rf_reg: LDO_REG4 {
+				regulator-name = "V3V8_RF";
+				regulator-min-microvolt = <3800000>;
+				regulator-max-microvolt = <3800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&usart1 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&usart2 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
+		     &pinctrl_pwm0_pwmh1_1
+		     &pinctrl_pwm0_pwmh2_0>;
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <3333>;
+	status = "okay";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+/* WMBUS (inverted with IO in the latest schematic) */
+&pinctrl_usart0 {
+	atmel,pins =
+		<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+/* RTS */
+&pinctrl_usart1 {
+	atmel,pins =
+		<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 7 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+/* IO (inverted with WMBUS in the latest schematic) */
+&pinctrl_usart2 {
+	atmel,pins =
+		<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE
+		 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts
new file mode 100644
index 0000000000000..fec7269088d10
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board
+ *
+ * Copyright (C) 2018 Overkiz SAS
+ *
+ * Authors: Dorian Rocipon <d.rocipon@overkiz.com>
+ *          Kevin Carli <k.carli@overkiz.com>
+ *          Mickael Gardet <m.gardet@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox3_common.dtsi"
+
+/ {
+	model = "Overkiz KIZBOX3-HS";
+	compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5";
+
+	led-controller-1 {
+		status = "okay";
+
+		led-1 {
+			status = "okay";
+		};
+
+		led-2 {
+			status = "okay";
+		};
+
+		led-3 {
+			status = "okay";
+		};
+
+		led-4 {
+			status = "okay";
+		};
+	};
+
+	led-controller-2  {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_red
+			     &pinctrl_led_white>;
+		status = "okay";
+
+		led-5 {
+			label = "pio:red:user";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-6 {
+			label = "pio:white:user";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default" , "default", "default",
+				"default", "default" ;
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>;
+		pinctrl-2 = <&pinctrl_pio_io_boot
+			     &pinctrl_pio_io_reset
+			     &pinctrl_pio_io_test_radio>;
+		pinctrl-3 = <&pinctrl_pio_zbe_test_radio
+			     &pinctrl_pio_zbe_rst>;
+		pinctrl-4 = <&pinctrl_pio_input>;
+
+		switch-1 {
+			label = "SW1";
+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+
+		switch-2 {
+			label = "SW2";
+			gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		switch-3 {
+			label = "SW3";
+			gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		switch-7 {
+			label = "SW7";
+			gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
+			linux,code = <0x107>;
+			wakeup-source;
+		};
+
+		switch-8 {
+			label = "SW8";
+			gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
+			linux,code = <0x108>;
+			wakeup-source;
+		};
+	};
+
+	gpios {
+		compatible = "gpio";
+		status = "okay";
+
+		rf_on {
+			label = "rf on";
+			gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		wifi_on {
+			label = "wifi on";
+			gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		zbe_test_radio {
+			label = "zbe test radio";
+			gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		zbe_rst {
+			label = "zbe rst";
+			gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_reset {
+			label = "io reset";
+			gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_test_radio {
+			label = "io test radio";
+			gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_boot_0 {
+			label = "io boot 0";
+			gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_boot_1 {
+			label = "io boot 1";
+			gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		verbose_bootloader {
+			label = "verbose bootloader";
+			gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		 nail_bed_detection  {
+			label = "nail bed detection";
+			gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		 id_usba {
+			label = "id usba";
+			gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
+			input;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PA22__GPIO>,
+		<PIN_PA24__GPIO>,
+		<PIN_PA26__GPIO>,
+		<PIN_PA29__GPIO>,
+		<PIN_PA18__GPIO>;
+		bias-disable;
+		};
+
+	pinctrl_gpio {
+		pinctrl_pio_rf: gpio_rf {
+			pinmux = <PIN_PC19__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_wifi: gpio_wifi {
+			pinmux = <PIN_PC20__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_io_boot: gpio_io_boot {
+			pinmux =
+			<PIN_PC11__GPIO>,
+			<PIN_PC17__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_io_test_radio: gpio_io_test_radio {
+			pinmux = <PIN_PC9__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio {
+			pinmux = <PIN_PB21__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_zbe_rst: gpio_zbe_rst {
+			pinmux = <PIN_PB25__GPIO>;
+			bias-disable;
+		};
+		/* stm32 reset must be open drain (internal pull up) */
+		pinctrl_pio_io_reset: gpio_io_reset {
+			pinmux = <PIN_PB30__GPIO>;
+			bias-disable;
+			drive-open-drain;
+			output-low;
+		};
+		pinctrl_pio_input: gpio_input {
+			pinmux =
+			<PIN_PB11__GPIO>,
+			<PIN_PB12__GPIO>,
+			<PIN_PC0__GPIO>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_leds {
+		pinctrl_led_red: led_red {
+			pinmux = <PIN_PB1__GPIO>;
+			bias-disable;
+		};
+		pinctrl_led_white: led_white {
+			pinmux = <PIN_PB8__GPIO>;
+			bias-disable;
+		};
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&flx0 {
+	status = "okay";
+
+	uart5: serial@200  {
+			status = "okay";
+	};
+};
+
+&flx3 {
+	status = "okay";
+	uart8: serial@200 {
+		status = "okay";
+	};
+};
+
+&flx4 {
+	status = "okay";
+
+	i2c6: i2c@600 {
+		status = "okay";
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
new file mode 100644
index 0000000000000..4656646284199
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3
+ * family SoC boards
+ *
+ * Copyright (C) 2018 Overkiz SAS
+ *
+ * Authors: Dorian Rocipon <d.rocipon@overkiz.com>
+ *          Kevin Carli <k.carli@overkiz.com>
+ *          Mickael Gardet <m.gardet@overkiz.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox3";
+	compatible = "overkiz,kizbox3", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart8;
+	};
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = "serial1:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	vdd_adc_vddana: supply_3v3_ana {
+		compatible = "regulator-fixed";
+		regulator-name = "adc-vddana";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_adc_vref: supply_3v3_ref {
+		compatible = "regulator-fixed";
+		regulator-name = "adc-vref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwm0_pwm_h0
+			     &pinctrl_pwm0_pwm_h1
+			     &pinctrl_pwm0_pwm_h2
+			     &pinctrl_pwm0_pwm_h3>;
+		status = "disabled";
+
+		led-1 {
+			label = "pwm:red:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+			status = "disabled";
+		};
+
+		led-2 {
+			label = "pwm:green:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+			status = "disabled";
+		};
+
+		led-3 {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			status = "disabled";
+		};
+
+		led-4 {
+			label = "pwm:white:user";
+			pwms = <&pwm0 3 10000000 0>;
+			max-brightness = <255>;
+			status = "disabled";
+		};
+	};
+};
+
+&ebi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+		pinctrl-names = "default";
+		reg = <0x3 0x0 0x800000>;
+
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			u-boot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x140000>;
+			};
+
+			u-boot-factory@160000 {
+				label = "u-boot-factory";
+				reg = <0x160000 0x140000>;
+			};
+
+			ubi@2A0000 {
+				label = "ubi";
+				reg = <0x2A0000 0x7D60000>;
+			};
+		};
+
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&pioA {
+	pinctrl_ebi_nand_addr: ebi-addr-1 {
+		pinmux = <PIN_PA0__D0>,
+			<PIN_PA1__D1>,
+			<PIN_PA2__D2>,
+			<PIN_PA3__D3>,
+			<PIN_PA4__D4>,
+			<PIN_PA5__D5>,
+			<PIN_PA6__D6>,
+			<PIN_PA7__D7>,
+			<PIN_PA8__NWE_NANDWE>,
+			<PIN_PA9__NCS3>,
+			<PIN_PA10__A21_NANDALE>,
+			<PIN_PA11__A22_NANDCLE>,
+			<PIN_PA21__NANDRDY>;
+		bias-disable;
+	};
+
+	pinctrl_usart {
+		pinctrl_usart_0: usart0-0 {
+			pinmux = < PIN_PB26__URXD0>, <PIN_PB27__UTXD0>;
+			bias-disable;
+		};
+		pinctrl_usart_1: usart1-0 {
+			pinmux = < PIN_PD2__URXD1>, <PIN_PD3__UTXD1>;
+			bias-disable;
+		};
+		pinctrl_usart_2: usart2-0 {
+			pinmux = < PIN_PD4__URXD2>, <PIN_PD5__UTXD2>;
+			bias-disable;
+		};
+		pinctrl_usart_3: usart3-0 {
+			pinmux = < PIN_PC12__URXD3>, <PIN_PC13__UTXD3>;
+			bias-disable;
+		};
+		pinctrl_usart_4: usart4-0 {
+			pinmux = < PIN_PB3__URXD4>, <PIN_PB4__UTXD4>;
+			bias-disable;
+		};
+		pinctrl_flx0_default: flx0_usart_default {
+			pinmux = <PIN_PB28__FLEXCOM0_IO0>, //TX
+			<PIN_PB29__FLEXCOM0_IO1>; //RX
+			bias-disable;
+		};
+		pinctrl_flx3_default: flx3_usart_default {
+			pinmux = <PIN_PB22__FLEXCOM3_IO1>, //RX
+			<PIN_PB23__FLEXCOM3_IO0>; //TX
+			bias-disable;
+		};
+	};
+
+	pinctrl_flx4_default: flx4_i2c6_default {
+		pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
+		<PIN_PD13__FLEXCOM4_IO1>; //CLK
+		bias-disable;
+		drive-open-drain;
+	};
+
+	pinctrl_pwm0 {
+		pinctrl_pwm0_pwm_h0: pwm0_pwm_h0 {
+			pinmux = <PIN_PA30__PWMH0>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h1: pwm0_pwmh1 {
+			pinmux = <PIN_PB0__PWMH1>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h2: pwm0_pwm_h2 {
+			pinmux = <PIN_PB5__PWMH2>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h3: pwm0_pwm_h3 {
+			pinmux = <PIN_PB7__PWMH3>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_adc {
+		pinctrl_adc2: adc2 {
+			pinmux = <PIN_PD21__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc3: adc3 {
+			pinmux = <PIN_PD22__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc4: adc4 {
+			pinmux = <PIN_PD23__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc5: adc5 {
+			pinmux = <PIN_PD24__GPIO>;
+			bias-disable;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_0>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+/* debug uart */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_1>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_2>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_3>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_4>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart5: serial@200  {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "disabled";
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart8: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "disabled";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "disabled";
+
+	i2c6: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "disabled";
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc2
+		     &pinctrl_adc3
+		     &pinctrl_adc4
+		     &pinctrl_adc5>;
+
+	vddana-supply = <&vdd_adc_vddana>;
+	vref-supply = <&vdd_adc_vref>;
+	status = "disabled";
+};
+
+&securam {
+	export;
+
+	/* export overkiz u-boot mode/version and factory */
+	uboot@1400 {
+		reg = <0x1400 0x20>;
+		export;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizboxmini-base.dts b/arch/arm/boot/dts/microchip/at91-kizboxmini-base.dts
new file mode 100644
index 0000000000000..81c29ca5cc1b7
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-base.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-kizboxmini-base.dts - Device Tree file for Overkiz Kizbox mini
+ * base board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini";
+	compatible = "overkiz,kizboxmini-base", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&pinctrl_usart0 {
+	atmel,pins =
+		<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi
new file mode 100644
index 0000000000000..42640fe6b6d04
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
+ *
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Gaël Portay <g.portay@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+#include "at91sam9g25.dtsi"
+
+/ {
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		adc_op_clk {
+			status = "disabled";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		key-prog {
+			label = "PB_PROG";
+			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		key-reset {
+			label = "PB_RST";
+			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds: led-controller-1 {
+		compatible = "pwm-leds";
+
+		led_blue: led-1 {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+			status = "disabled";
+		};
+
+		led_green: led-2 {
+			label = "pwm:green:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led_red: led-3 {
+			label = "pwm:red:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+		     &pinctrl_pwm0_pwm1_1
+		     &pinctrl_pwm0_pwm2_1>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+			&pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_oe_we
+		     &pinctrl_nand_cs
+		     &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts
new file mode 100644
index 0000000000000..c07d3076a9bc1
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini Mother Board";
+	compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&usb0 {
+	num-ports = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizboxmini-rd.dts b/arch/arm/boot/dts/microchip/at91-kizboxmini-rd.dts
new file mode 100644
index 0000000000000..ab50f4d22387a
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-rd.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini RailDIN";
+	compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+};
+
+&pinctrl {
+	adc0 {
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&usart0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	atmel,adc-channels-used = <0x0020>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-linea.dtsi b/arch/arm/boot/dts/microchip/at91-linea.dtsi
new file mode 100644
index 0000000000000..533a440d5583e
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-linea.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-linea.dtsi - Device Tree Include file for the Axentia Linea Module.
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+
+#include "sama5d31.dtsi"
+
+/ {
+	compatible = "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-lmu5000.dts b/arch/arm/boot/dts/microchip/at91-lmu5000.dts
new file mode 100644
index 0000000000000..f8863d7c07982
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-lmu5000.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for CalAmp LMU5000 board
+ *
+ * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "CalAmp LMU5000";
+	compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+			status = "okay";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				kernel@0 {
+					label = "kernel";
+					reg = <0x0 0x400000>;
+				};
+
+				rootfs@400000 {
+					label = "rootfs";
+					reg = <0x400000 0x3C00000>;
+				};
+
+				user1@4000000 {
+					label = "user1";
+					reg = <0x4000000 0x2000000>;
+				};
+
+				user2@6000000 {
+					label = "user2";
+					reg = <0x6000000 0x2000000>;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_pck0_as_mck: pck0_as_mck {
+			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb0 {
+		pinctrl_usb1_vbus_gpio: usb0_vbus_gpio {
+			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&ssc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_ssc0_tx>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usart0 {
+	pinctrl-0 =
+		<&pinctrl_usart0
+		 &pinctrl_usart0_rts
+		 &pinctrl_usart0_cts
+		 &pinctrl_usart0_dtr_dsr
+		 &pinctrl_usart0_dcd
+		 &pinctrl_usart0_ri>;
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <2>;
+	status = "okay";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+	atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-natte.dtsi b/arch/arm/boot/dts/microchip/at91-natte.dtsi
new file mode 100644
index 0000000000000..49f0a0c46cde4
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-natte.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91-natte.dts - Device Tree include file for the Natte board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+
+/ {
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>,
+			    <&ioexp 1 GPIO_ACTIVE_HIGH>,
+			    <&ioexp 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	batntc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 5>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"batntc0", "batntc1", "batntc2", "batntc3",
+			"batntc4", "batntc5", "batntc6", "batntc7";
+	};
+
+	batv-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 6>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"batv0", "batv1", "batv2", "batv3",
+			"batv4", "batv5", "batv6", "batv7";
+	};
+
+	iout-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 7>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"iout0", "iout1", "iout2", "iout3",
+			"iout4", "iout5", "iout6", "iout7";
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux";
+		mux-locked;
+		i2c-parent = <&i2c0>;
+		mux-controls = <&mux>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	ioexp: ioexp@20 {
+		#gpio-cells = <2>;
+		compatible = "semtech,sx1502q";
+		reg = <0x20>;
+
+		gpio-controller;
+		ngpios = <8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio3_cfg_pins>;
+
+		gpio3_cfg_pins: gpio3_cfg {
+			pins = "gpio3";
+			bias-pull-up;
+		};
+	};
+
+	adc: adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <1>;
+			ti,datarate = <4>;
+		};
+
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts
new file mode 100644
index 0000000000000..f71377c9b757f
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+/dts-v1/;
+#include "at91-linea.dtsi"
+#include "at91-natte.dtsi"
+
+/ {
+	model = "Axentia Linea-Nattis v2 Natte v2";
+	compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			label = "Wakeup";
+			linux,code = <10>;
+			wakeup-source;
+			gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	panel_reg: panel-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-VCC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	bl_reg: backlight-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-VDD";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	panel_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 100000 0>;
+
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <40>;
+
+		power-supply = <&bl_reg>;
+		enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_blon>;
+	};
+
+	panel: panel {
+		compatible = "sharp,lq150x1lg11", "panel-lvds";
+
+		backlight = <&panel_bl>;
+		power-supply = <&panel_reg>;
+
+		width-mm = <304>;
+		height-mm = <228>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			// 1024x768 @ 60Hz (typical)
+			clock-frequency = <50000000 65000000 80000000>;
+			hactive = <1024>;
+			vactive = <768>;
+			hfront-porch = <48 88 88>;
+			hback-porch = <96 168 168>;
+			hsync-len = <32 64 64>;
+			vsync-len = <3 13 74>;
+			vfront-porch = <3 13 74>;
+			vback-porch = <3 12 74>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,ds90c185", "lvds-encoder";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&hlcdc_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "nattis-tfa9879";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,widgets = "Line", "Line Out Jack";
+		simple-audio-card,routing = "Line Out Jack", "LINEOUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssc0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&amp>;
+		};
+	};
+};
+
+&pinctrl {
+	nattis {
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOD  5 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_lvds_prlud0: lvds_prlud0 {
+			atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+
+		pinctrl_lvds_hipow0: lvds_hipow0 {
+			atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+
+		pinctrl_blon: blon {
+			atmel,pins = <AT91_PIOA 20 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	temp@18 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+		smbus-timeout-disable;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	amp: amplifier@6c {
+		 compatible = "nxp,tfa9879";
+		 reg = <0x6c>;
+		 #sound-dai-cells = <0>;
+	};
+};
+
+&ssc0 {
+	status = "okay";
+
+	atmel,clk-from-rk-pin;
+	#sound-dai-cells = <0>;
+};
+
+&hlcdc {
+	status = "okay";
+
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
+
+		port@0 {
+			hlcdc_output: endpoint {
+				remote-endpoint = <&lvds_encoder_input>;
+				bus-width = <16>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+		     &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_cd>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+	};
+};
+
+&usart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0>;
+	atmel,use-dma-rx;
+};
+
+&nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		barebox@40000 {
+			label = "barebox";
+			reg = <0x40000 0x60000>;
+		};
+
+		bareboxenv@c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
+		};
+
+		bareboxenv2@100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree@180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x500000>;
+		};
+
+		rootfs@800000 {
+			label = "rootfs";
+			reg = <0x800000 0x1f800000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+
+	atmel,use-dma-rx;
+};
+
+&usb0 {
+	status = "okay";
+
+	atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91-q5xr5.dts b/arch/arm/boot/dts/microchip/at91-q5xr5.dts
new file mode 100644
index 0000000000000..9cf60b6f695c4
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-q5xr5.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for Exegin Q5xR5 board
+ *
+ * Copyright (C) 2014 Owen Kirby <osk@exegin.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "Exegin Q5x (rev5)";
+	compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x0>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "cfi-flash";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x1000000 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			kernel@0 {
+				label = "kernel";
+				reg = <0x0 0x200000>;
+			};
+
+			rootfs@200000 {
+				label = "rootfs";
+				reg = <0x200000 0x600000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_pck0_as_mck: pck0_as_mck {
+			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	spi0 {
+		pinctrl_spi0: spi0-0 {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi0_npcs0: spi0_npcs0 {
+			atmel,pins = <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi0_npcs1: spi0_npcs1 {
+			atmel,pins = <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	spi1 {
+		pinctrl_spi1: spi1-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_npcs0: spi1_npcs0 {
+			atmel,pins = <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_npcs1: spi1_npcs1 {
+			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_npcs0 &pinctrl_spi0_npcs1>;
+	cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91boot@0 {
+			label = "at91boot";
+			reg = <0x0 0x4000>;
+		};
+
+		uenv@4000 {
+			label = "uboot-env";
+			reg = <0x4000 0x4000>;
+		};
+
+		uboot@8000 {
+			label = "uboot";
+			reg = <0x8000 0x3E000>;
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>;
+	cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>;
+	status = "okay";
+};
+
+&usart0 {
+	pinctrl-0 =
+		<&pinctrl_usart0
+		 &pinctrl_usart0_rts
+		 &pinctrl_usart0_cts
+		 &pinctrl_usart0_dtr_dsr
+		 &pinctrl_usart0_dcd
+		 &pinctrl_usart0_ri>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <2>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-qil_a9260.dts b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts
new file mode 100644
index 0000000000000..5ccb3c139592d
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
+ *
+ * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+/ {
+	model = "Calao QIL A9260";
+	compatible = "calao,qil-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				pinctrl-0 =
+					<&pinctrl_usart1
+					 &pinctrl_usart1_rts
+					 &pinctrl_usart1_cts>;
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				pinctrl-0 =
+					<&pinctrl_usart2
+					 &pinctrl_usart2_rts
+					 &pinctrl_usart2_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				status = "okay";
+				cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>;
+
+				m41t94@0 {
+					compatible = "st,m41t94";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			shdwc: poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@a0000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@c0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4c0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7cc0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-user {
+			label = "user_pb";
+			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts
new file mode 100644
index 0000000000000..2fb51b9aca2ae
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board
+ *
+ *  Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Olimex sam9-l9260";
+	compatible = "olimex,sam9-l9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			macb0: ethernet@fffc4000 {
+				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>;
+				phy-mode = "mii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* CD pin */
+							 AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* WP pin */
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+
+		usb0: ohci@500000 {
+			status = "okay";
+		};
+
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "sam9-l9260:yellow:pwr";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+		};
+
+		status_led {
+			label = "sam9-l9260:green:status";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
new file mode 100644
index 0000000000000..cb86a3a170ce1
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60_curiosity.dts - Device Tree file for Microchip SAM9X60 Curiosity board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X60 Curiosity";
+	compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c6;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-red {
+			label = "red";
+			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioD 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	vdd_1v8: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	vdd_1v15: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1150000>;
+		regulator-min-microvolt = <1150000>;
+		regulator-name = "VDD_1V15";
+	};
+
+	vdd1_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD1_3V3";
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_lsb>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+		};
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "disabled";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	adc {
+		pinctrl_adc_default: adc-default {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg-default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 */
+				 AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_lsb: ebi-data-lsb {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-nand {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0-twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx6_default: flx6-twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx7_default: flx7-usart {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+		};
+	};
+
+	gpio-keys {
+		pinctrl_key_gpio_default: pinctrl-key-gpio {
+			atmel,pins = <AT91_PIOA 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio-leds {
+			atmel,pins = <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0-rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0-0 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0-1 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0-2 {
+			atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+
+		pinctrl_sdmmc0_cd: sdmmc0-cd {
+			atmel,pins =
+				<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc1 {
+		pinctrl_sdmmc1_default: sdmmc1 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
+				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
+				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
+				 AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
+				 AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
+				 AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
+		};
+	};
+
+	usb0 {
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins = <AT91_PIOA 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb1 {
+		pinctrl_usb_default: usb-default {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+	cd-gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA 27 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 18 GPIO_ACTIVE_HIGH
+			   &pioD 15 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
new file mode 100644
index 0000000000000..5cd593028aff7
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
@@ -0,0 +1,669 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X60-EK";
+	compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c6;
+		serial1 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "SW1";
+			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay"; /* Conflict with pwm0. */
+
+		red {
+			label = "red";
+			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vdd_1v8: fixed-regulator-vdd_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v15: fixed-regulator-vdd_1v15 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-always-on;
+	};
+
+	vdd1_3v3: fixed-regulator-vdd1_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd2_3v3: regulator-fixed-vdd2_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&classd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_classd_default>;
+	atmel,pwm-type = "diff";
+	atmel,non-overlap-time = <10>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+			status = "okay";
+		};
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "disabled";
+
+	spi4: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "disabled";
+	};
+};
+
+&flx5 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart5: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx5_default>;
+		status = "okay";
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		gpio_exp: mcp23008@20 {
+			compatible = "microchip,mcp23008";
+			reg = <0x20>;
+		};
+	};
+};
+
+&gpbr {
+	status = "okay";
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s_default>;
+	#sound-dai-cells = <0>;
+	status = "disabled"; /* Conflict with QSPI. */
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	adc {
+		pinctrl_adc_default: adc_default {
+			atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg_default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	i2s {
+		pinctrl_i2s_default: i2s {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SCK */
+				 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SWS */
+				 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDIN */
+				 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDOUT */
+				 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* I2SMCK */
+		};
+	};
+
+	qspi {
+		pinctrl_qspi: qspi {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 21 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 22 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 23 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 24 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_data_0_15: ebi-data-msb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-0 {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0_twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx4_default: flx4_spi {
+			atmel,pins =
+				<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx5_default: flx5_uart {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx6_default: flx6_twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	classd {
+		pinctrl_classd_default: classd {
+			atmel,pins =
+				<AT91_PIOA 24 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN
+				 AT91_PIOA 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN0 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 RXD1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 TXD1 */
+				 AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN1 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0_rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0_0 {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0_1 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0_2 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_3: pwm0_3 {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+		pinctrl_sdmmc0_cd: sdmmc0_cd {
+			atmel,pins =
+				<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc1 {
+		pinctrl_sdmmc1_default: sdmmc1 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
+				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
+				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
+				 AT91_PIOA  2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
+				 AT91_PIOA  3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
+				 AT91_PIOA  4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
+		};
+	};
+
+	gpio_keys {
+		pinctrl_key_gpio_default: pinctrl_key_gpio {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb0 {
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb1 {
+		pinctrl_usb_default: usb_default {
+			atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio_leds {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+	status = "okay";
+	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled"; /* Conflict with flx4. */
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay"; /* Conflict with i2s. */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 15 GPIO_ACTIVE_HIGH
+			   &pioD 16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
new file mode 100644
index 0000000000000..95ecb7d040a88
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Atmel SAMA5D27 SoM1";
+	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		i2c0 = &i2c0;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ahb {
+		sdmmc0: sdio-host@a0000000 {
+			microchip,sdcal-inverted;
+		};
+
+		apb {
+			qspi1: spi@f0024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi1_default>;
+
+				flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <104000000>;
+					spi-cs-setup-ns = <7>;
+					spi-tx-bus-width = <4>;
+					spi-rx-bus-width = <4>;
+					m25p,fast-read;
+
+					at91bootstrap@0 {
+						label = "at91bootstrap";
+						reg = <0x00000000 0x00040000>;
+					};
+
+					bootloader@40000 {
+						label = "bootloader";
+						reg = <0x00040000 0x000c0000>;
+					};
+
+					bootloaderenvred@100000 {
+						label = "bootloader env redundant";
+						reg = <0x00100000 0x00040000>;
+					};
+
+					bootloaderenv@140000 {
+						label = "bootloader env";
+						reg = <0x00140000 0x00040000>;
+					};
+
+					dtb@180000 {
+						label = "device tree";
+						reg = <0x00180000 0x00080000>;
+					};
+
+					kernel@200000 {
+						label = "kernel";
+						reg = <0x00200000 0x00600000>;
+					};
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy-mode = "rmii";
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioA>;
+					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+				};
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				at24@50 {
+					compatible = "atmel,24c02";
+					reg = <0x50>;
+					pagesize = <8>;
+				};
+			};
+
+			pinctrl@fc038000 {
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_qspi1_default: qspi1_default {
+					sck_cs {
+						pinmux = <PIN_PB5__QSPI1_SCK>,
+							 <PIN_PB6__QSPI1_CS>;
+						bias-disable;
+					};
+
+					data {
+						pinmux = <PIN_PB7__QSPI1_IO0>,
+							 <PIN_PB8__QSPI1_IO1>,
+							 <PIN_PB9__QSPI1_IO2>,
+							 <PIN_PB10__QSPI1_IO3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PD9__GTXCK>,
+						 <PIN_PD10__GTXEN>,
+						 <PIN_PD11__GRXDV>,
+						 <PIN_PD12__GRXER>,
+						 <PIN_PD13__GRX0>,
+						 <PIN_PD14__GRX1>,
+						 <PIN_PD15__GTX0>,
+						 <PIN_PD16__GTX1>,
+						 <PIN_PD17__GMDC>,
+						 <PIN_PD18__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PD31__GPIO>;
+					bias-disable;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
new file mode 100644
index 0000000000000..d0a6dbd377dfa
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
@@ -0,0 +1,552 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_som1.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Atmel SAMA5D27 SOM1 EK";
+	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart1;	/* DBGU */
+		serial1 = &uart4;	/* mikro BUS 1 */
+		serial2 = &uart2;	/* mikro BUS 2 */
+		i2c1 = &i2c1;
+		i2c2 = &i2c3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			mmc-ddr-3_3v;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			status = "okay";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay";
+		};
+
+		apb {
+			isc: isc@f0008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
+			};
+
+			qspi1: spi@f0024000 {
+				status = "okay";
+			};
+
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8008000 {
+				status = "okay";
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			uart2: serial@f8024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			pwm0: pwm@f802c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
+				status = "disabled"; /* Conflict with leds. */
+			};
+
+			flx1: flexcom@f8038000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c3: i2c@600 {
+					dmas = <0>, <0>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+					pinctrl-1 = <&pinctrl_i2c3_gpio>;
+					sda-gpios = <&pioA PIN_PA24 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PA23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					status = "okay";
+				};
+			};
+
+			poweroff@f8048010 {
+				debounce-delay-us = <976>;
+				atmel,wakeup-rtc-timer;
+
+				input@0 {
+					reg = <0>;
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			uart3: serial@fc008000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
+				status = "disabled"; /* Conflict with isc. */
+			};
+
+			uart4: serial@fc00c000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+				status = "okay";
+			};
+
+			flx3: flexcom@fc014000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx3_default>;
+					status = "disabled"; /* Conflict with isc. */
+				};
+
+				spi5: spi@400 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx3_default>;
+					status = "disabled"; /* Conflict with isc. */
+				};
+			};
+
+			flx4: flexcom@fc018000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+				status = "okay";
+
+				uart9: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					status = "disabled"; /* Conflict with spi6 and i2c6. */
+				};
+
+				spi6: spi@400 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
+					status = "okay"; /* Conflict with uart5 and i2c6. */
+				};
+
+				i2c6: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					status = "disabled"; /* Conflict with uart5 and spi6. */
+				};
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+			};
+
+			adc: adc@fc030000 {
+				vddana-supply = <&vddana>;
+				vref-supply = <&advref>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_an &pinctrl_mikrobus2_an>;
+
+				status = "okay";
+			};
+
+			pinctrl@fc038000 {
+
+				pinctrl_can1_default: can1_default {
+					pinmux = <PIN_PC26__CANTX1>,
+						 <PIN_PC27__CANRX1>;
+					bias-disable;
+				};
+
+				pinctrl_flx3_default: flx3_default {
+					pinmux = <PIN_PC20__FLEXCOM3_IO0>,
+						 <PIN_PC19__FLEXCOM3_IO1>,
+						 <PIN_PC18__FLEXCOM3_IO2>,
+						 <PIN_PC21__FLEXCOM3_IO3>,
+						 <PIN_PC22__FLEXCOM3_IO4>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+                                        pinmux = <PIN_PD4__GPIO>,
+                                                 <PIN_PD5__GPIO>;
+                                        bias-disable;
+                                };
+
+
+				pinctrl_isc_base: isc_base {
+					pinmux = <PIN_PC21__ISC_PCK>,
+						 <PIN_PC22__ISC_VSYNC>,
+						 <PIN_PC23__ISC_HSYNC>,
+						 <PIN_PC24__ISC_MCK>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_8bit: isc_data_8bit {
+					pinmux = <PIN_PC20__ISC_D11>,
+						 <PIN_PC19__ISC_D10>,
+						 <PIN_PC18__ISC_D9>,
+						 <PIN_PC17__ISC_D8>,
+						 <PIN_PC16__ISC_D7>,
+						 <PIN_PC15__ISC_D6>,
+						 <PIN_PC14__ISC_D5>,
+						 <PIN_PC13__ISC_D4>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_9_10: isc_data_9_10 {
+					pinmux = <PIN_PC12__ISC_D3>,
+						 <PIN_PC11__ISC_D2>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_11_12: isc_data_11_12 {
+					pinmux = <PIN_PC10__ISC_D1>,
+						 <PIN_PC9__ISC_D0>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PA29__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PA10__GPIO>,
+						 <PIN_PB1__GPIO>,
+						 <PIN_PA31__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-disable;
+					};
+
+					ck_cd_vddsel {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_sdmmc1_default: sdmmc1_default {
+					cmd_data {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-disable;
+					};
+
+					conf-ck_cd {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PC12__URXD3>,
+						 <PIN_PC13__UTXD3>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PA27__GPIO>,
+						 <PIN_PD19__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PD20__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_an: mikrobus1_an {
+					pinmux = <PIN_PD25__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_an: mikrobus2_an {
+					pinmux = <PIN_PD26__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_rst: mikrobus1_rst {
+					pinmux = <PIN_PB2__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_rst: mikrobus2_rst {
+					pinmux = <PIN_PA26__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+					pinmux = <PIN_PD0__FLEXCOM4_IO4>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
+					pinmux = <PIN_PC31__FLEXCOM4_IO3>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus_spi: mikrobus_spi {
+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+						 <PIN_PC29__FLEXCOM4_IO1>,
+						 <PIN_PC30__FLEXCOM4_IO2>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_pwm: mikrobus1_pwm {
+					pinmux = <PIN_PB1__PWML1>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_pwm: mikrobus2_pwm {
+					pinmux = <PIN_PA31__PWML0>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_int: mikrobus1_int {
+					pinmux = <PIN_PB0__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_int: mikrobus2_int {
+					pinmux = <PIN_PA25__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_uart: mikrobus1_uart {
+					pinmux = <PIN_PB3__URXD4>,
+						 <PIN_PB4__UTXD4>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_uart: mikrobus2_uart {
+					pinmux = <PIN_PD23__URXD2>,
+						 <PIN_PD24__UTXD2>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus_i2c: mikrobus1_i2c {
+					pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+						 <PIN_PA23__FLEXCOM1_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c3_gpio: i2c3_gpio {
+					pinmux = <PIN_PA24__GPIO>,
+						 <PIN_PA23__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_default: flx4_uart_default {
+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+						 <PIN_PC29__FLEXCOM4_IO1>,
+						 <PIN_PC30__FLEXCOM4_IO2>,
+						 <PIN_PC31__FLEXCOM4_IO3>,
+						 <PIN_PD0__FLEXCOM4_IO4>;
+					bias-disable;
+				};
+			};
+
+			can1: can@fc050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_default>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "USER";
+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* Conflict with pwm0. */
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vddin_3v3: fixed-regulator-vddin_3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDIN_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		status = "okay";
+	};
+
+	vddana: fixed-regulator-vddana {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDANA";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vddin_3v3>;
+		status = "okay";
+	};
+
+	advref: fixed-regulator-advref {
+		compatible = "regulator-fixed";
+
+		regulator-name = "advref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vddana>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
new file mode 100644
index 0000000000000..4617805c77488
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ * Author: Eugen Hristev <eugen.hristev@microcihp.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1";
+	compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		i2c0 = &i2c0;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-wilc1000";
+		reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&pioA PIN_PA29 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_wilc_pwrseq>;
+		pinctrl-names = "default";
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+
+	uart6: serial@200 {
+		pinctrl-0 = <&pinctrl_flx1_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	pinctrl-names = "default", "gpio";
+	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	mcp16502@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		status = "okay";
+		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddio_ddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_core: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_ddr: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-mode = "rmii";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+	};
+};
+
+&pmc {
+	atmel,osc-bypass;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled";
+
+	qspi1_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		m25p,fast-read;
+		status = "disabled";
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_flx1_default: flx1_usart_default {
+		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+			 <PIN_PA23__FLEXCOM1_IO1>,
+			 <PIN_PA25__FLEXCOM1_IO3>,
+			 <PIN_PA26__FLEXCOM1_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_default: i2c0_default {
+		pinmux = <PIN_PD21__TWD0>,
+			 <PIN_PD22__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_gpio: i2c0_gpio {
+		pinmux = <PIN_PD21__GPIO>,
+			 <PIN_PD22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_gpio: i2c1_gpio {
+		pinmux = <PIN_PD19__GPIO>,
+			 <PIN_PD20__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PB14__GTXCK>,
+			 <PIN_PB15__GTXEN>,
+			 <PIN_PB16__GRXDV>,
+			 <PIN_PB17__GRXER>,
+			 <PIN_PB18__GRX0>,
+			 <PIN_PB19__GRX1>,
+			 <PIN_PB20__GTX0>,
+			 <PIN_PB21__GTX1>,
+			 <PIN_PB22__GMDC>,
+			 <PIN_PB23__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PB5__QSPI1_SCK>,
+			 <PIN_PB6__QSPI1_CS>,
+			 <PIN_PB7__QSPI1_IO0>,
+			 <PIN_PB8__QSPI1_IO1>,
+			 <PIN_PB9__QSPI1_IO2>,
+			 <PIN_PB10__QSPI1_IO3>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd-data {
+			pinmux = <PIN_PA28__SDMMC1_CMD>,
+				 <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-disable;
+		};
+
+		conf-ck {
+			pinmux = <PIN_PA22__SDMMC1_CK>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_wilc_default: wilc_default {
+		conf-irq {
+			pinmux = <PIN_PB25__GPIO>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_wilc_pwrseq: wilc_pwrseq {
+		conf-ce-nrst {
+			pinmux = <PIN_PA27__GPIO>,
+				 <PIN_PA29__GPIO>;
+			bias-disable;
+		};
+
+		conf-rtcclk {
+			pinmux = <PIN_PB13__PCK1>;
+			bias-disable;
+		};
+	};
+};
+
+&sdmmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	no-1-8-v;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+
+	wilc: wifi@0 {
+		reg = <0>;
+		compatible = "microchip,wilc1000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wilc_default>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+		clock-names = "rtc";
+		interrupts = <PIN_PB25 IRQ_TYPE_NONE>;
+		interrupt-parent = <&pioA>;
+		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+		assigned-clock-rates = <32768>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
new file mode 100644
index 0000000000000..e055b9e2fe344
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_wlsom1.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1 EK";
+	compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		serial1 = &uart6;	/* BT */
+		serial2 = &uart5;	/* mikro BUS 2 */
+		serial3 = &uart3;	/* mikro BUS 1 */
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "USER BUTTON";
+			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3>;
+	vref-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default>;
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart5: serial@200 {
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx1 {
+	status = "okay";
+
+	uart6: serial@200 {
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&pioA {
+	/*
+	 * There is no real pinmux for ADC, if the pin
+	 * is not requested by another peripheral then
+	 * the muxing is done when channel is enabled.
+	 * Requesting pins for ADC is GPIO is
+	 * encouraged to prevent conflicts and to
+	 * disable bias in order to be in the same
+	 * state when the pin is not muxed to the adc.
+	 */
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD25__GPIO>,
+			 <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_usart_default {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PB2__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA6__GPIO>,
+			 <PIN_PA7__GPIO>,
+			 <PIN_PA8__GPIO>;
+		bias-pull-down;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA11__SDMMC0_VDDSEL>,
+				 <PIN_PA12__SDMMC0_WP>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart0_default: uart0_default {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_uart3_default: uart3_default {
+		pinmux = <PIN_PB11__URXD3>,
+			 <PIN_PB12__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		pinmux = <PIN_PA31__PWML0>,
+			 <PIN_PA30__PWMH0>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PA10__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba_vbus {
+		pinmux = <PIN_PA16__GPIO>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default>;
+	status = "okay";
+};
+
+&qspi1 {
+	status = "okay";
+
+	qspi1_flash: flash@0 {
+		status = "okay";
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	mmc-ddr-3_3v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioA PIN_PA10 GPIO_ACTIVE_HIGH
+			   0
+			  >;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
new file mode 100644
index 0000000000000..999adeca6f336
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
@@ -0,0 +1,790 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d2_icp.dts - Device Tree file for SAMA5D2-ICP board
+ *
+ *  Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ *	Author: Radu Pirea & Razvan Stefanescu,
+ *		Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
+ *		Cristian Birsan <cristian.birsan@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	model = "Microchip SAMA5D2-ICP";
+	compatible = "microchip,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* debug uart0 + mikro BUS 1 */
+		serial1 = &uart1;	/* mikro BUS 3 */
+		serial3 = &uart3;	/* mikro BUS 2 */
+		serial5 = &uart7;	/* flx2 */
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "USER_PB1";
+			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* conflict with pwm0 */
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_io_reg>;
+	vref-supply = <&vdd_io_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&flx0 { /* mikrobus2 spi */
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi2: spi@400 {
+		dmas = <0>, <0>;
+		cs-gpios = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus2_spi &pinctrl_ksz_spi_cs>;
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0: ksz8563@0 {
+			compatible = "microchip,ksz8563";
+			reg = <0>;
+			reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>;
+
+			spi-max-frequency = <500000>;
+			spi-cpha;
+			spi-cpol;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "cpu";
+					ethernet = <&macb0>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&flx2 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-0 = <&pinctrl_flx2_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay"; /* Conflict w/ qspi1. */
+	};
+};
+
+&flx3 { /* mikrobus1 spi */
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi5: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		mcp16502@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			status = "okay";
+			lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
+
+			regulators {
+				vdd_io_reg: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1850000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+			};
+		};
+	};
+};
+
+&i2c0 { /* mikrobus i2c */
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+		status = "okay";
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+		status = "disabled";
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		status = "disabled";
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>;
+	phy-mode = "mii";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&pioA {
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD24__GPIO>,
+				<PIN_PD25__GPIO>,
+				<PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	/*
+	 * The ADTRG pin can work on any edge type.
+	 * In here it's being pulled up, so need to
+	 * connect it to ground to get an edge e.g.
+	 * Trigger can be configured on falling, rise
+	 * or any edge, and the pull-up can be changed
+	 * to pull-down or left floating according to
+	 * needs.
+	 */
+	pinctrl_adtrg_default: adtrg_default {
+		pinmux = <PIN_PD31__ADTRG>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+			 <PIN_PC29__FLEXCOM4_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PC10__CANTX0>,
+			 <PIN_PC11__CANRX0>;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PC26__CANTX1>,
+			 <PIN_PC27__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_gpio: i2c1_gpio {
+                pinmux = <PIN_PD19__GPIO>,
+                         <PIN_PD20__GPIO>;
+                bias-disable;
+        };
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PB0__GPIO>,
+			 <PIN_PB1__GPIO>,
+			 <PIN_PA31__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PA6__QSPI1_SCK>,
+			 <PIN_PA7__QSPI1_IO0>,
+			 <PIN_PA8__QSPI1_IO1>,
+			 <PIN_PA9__QSPI1_IO2>,
+			 <PIN_PA10__QSPI1_IO3>,
+			 <PIN_PA11__QSPI1_CS>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd {
+			pinmux = <PIN_PA22__SDMMC1_CK>,
+				 <PIN_PA28__SDMMC1_CMD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_mikrobus_i2c: mikrobus_i2c {
+		pinmux = <PIN_PD22__TWCK0>,
+			 <PIN_PD21__TWD0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_gpio: i2c0_gpio {
+		pinmux = <PIN_PD21__GPIO>,
+			 <PIN_PD22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_an: mikrobus1_an {
+		pinmux = <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_rst: mikrobus1_rst {
+		pinmux = <PIN_PC5__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PC21__FLEXCOM3_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PC20__FLEXCOM3_IO0>,
+			 <PIN_PC19__FLEXCOM3_IO1>,
+			 <PIN_PC18__FLEXCOM3_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm: mikrobus1_pwm {
+		pinmux = <PIN_PC4__TIOB1>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_int: mikrobus1_int {
+		pinmux = <PIN_PC3__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_uart: mikrobus1_uart {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an: mikrobus2_an {
+		pinmux = <PIN_PD25__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_rst: mikrobus2_rst {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
+		pinmux = <PIN_PB31__FLEXCOM0_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_spi: mikrobus2_spi {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>,
+			 <PIN_PB30__FLEXCOM0_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_ksz_spi_cs: ksz_spi_cs {
+		pinmux = <PIN_PC0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm: mikrobus2_pwm {
+		pinmux = <PIN_PB23__TIOB2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_int: mikrobus2_int {
+		pinmux = <PIN_PB22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_uart: mikrobus2_uart {
+		pinmux = <PIN_PC12__URXD3>,
+			 <PIN_PC13__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_an: mikrobus3_an {
+		pinmux = <PIN_PD24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_rst: mikrobus3_rst {
+		pinmux = <PIN_PB21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_spi_cs: mikrobus3_spi_cs {
+		pinmux = <PIN_PA17__SPI0_NPCS0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_spi: mikrobus3_spi {
+		pinmux = <PIN_PA14__SPI0_SPCK>,
+			 <PIN_PA16__SPI0_MISO>,
+			 <PIN_PA15__SPI0_MOSI>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_pwm: mikrobus3_pwm {
+		pinmux = <PIN_PB20__TIOB3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_int: mikrobus3_int {
+		pinmux = <PIN_PB18__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_uart: mikrobus3_uart {
+		pinmux = <PIN_PC7__URXD1>,
+			 <PIN_PC8__UTXD1>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PC17__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba_vbus {
+		pinmux = <PIN_PD23__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+		pinmux = <PIN_PB5__PWMH2>,
+			 <PIN_PB6__PWML2>;
+		bias-pull-up;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PD1__GRXCK>,
+			 <PIN_PD2__GTXER>,
+			 <PIN_PD5__GRX2>,
+			 <PIN_PD6__GRX3>,
+			 <PIN_PD7__GTX2>,
+			 <PIN_PD8__GTX3>,
+			 <PIN_PD9__GTXCK>,
+			 <PIN_PD10__GTXEN>,
+			 <PIN_PD11__GRXDV>,
+			 <PIN_PD12__GRXER>,
+			 <PIN_PD13__GRX0>,
+			 <PIN_PD14__GRX1>,
+			 <PIN_PD15__GTX0>,
+			 <PIN_PD16__GTX1>,
+			 <PIN_PD17__GMDC>,
+			 <PIN_PD18__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PD3__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_rst: macb0_sw_rst {
+		pinmux = <PIN_PD4__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx2_default: flx2_default {
+		pinmux = <PIN_PA6__FLEXCOM2_IO0>,
+			 <PIN_PA7__FLEXCOM2_IO1>,
+			 <PIN_PA9__FLEXCOM2_IO3>,
+			 <PIN_PA10__FLEXCOM2_IO4>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+	status = "disabled"; /* conflict with leds, HSIC */
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled"; /* Conflict with wilc_pwrseq, flx2 */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x00000000 0x00040000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x00040000 0x000c0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x00100000 0x00040000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x00140000 0x00040000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x00180000 0x00080000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x00200000 0x00600000>;
+		};
+	};
+};
+
+&sdmmc0 {
+	no-1-8-v;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&spi0 {  /* mikrobus3 spi */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus3_spi &pinctrl_mikrobus3_spi_cs>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus3_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PD23 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
new file mode 100644
index 0000000000000..200b20515ab12
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
+ *
+ *  Copyright (C) 2017 Microchip/Atmel,
+ *		  2017 Wenyou Yang <wenyou.yang@microchip.com>
+ *		  2017 Ludovic Desroches <ludovic.desroches@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Atmel SAMA5D2 PTC EK";
+	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		i2c0 = &i2c0;	/* mikroBUS 1 */
+		i2c1 = &i2c1;	/* XPRO EXT1 */
+		i2c2 = &i2c2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand_default>;
+			status = "okay"; /* conflicts with sdmmc1 and qspi0 */
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x1f800000>;
+						};
+					};
+				};
+			};
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			status = "okay";
+		};
+
+		apb {
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart0: serial@f801c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			uart2: serial@f8024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+			};
+
+			flx0: flexcom@f8034000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c2: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_flx0_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					status = "okay";
+				};
+			};
+
+			poweroff@f8048010 {
+				debounce-delay-us = <976>;
+
+				input@0 {
+					reg = <0>;
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			spi1: spi@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1_default>;
+				status = "okay";
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				at24@50 {
+					compatible = "atmel,24c02";
+					reg = <0x50>;
+					pagesize = <8>;
+				};
+			};
+
+			pinctrl@fc038000 {
+				pinctrl_flx0_default: flx0_default {
+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+						 <PIN_PB29__FLEXCOM0_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx0_gpio: flx0_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PC6__TWD1>,
+						 <PIN_PC7__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PC6__GPIO>,
+						 <PIN_PC7__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PA10__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB6__GPIO>,
+						 <PIN_PB8__GPIO>,
+						 <PIN_PB10__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PB24__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_nand_default: nand_default {
+					re_we_data {
+						pinmux = <PIN_PA22__D0>,
+							 <PIN_PA23__D1>,
+							 <PIN_PA24__D2>,
+							 <PIN_PA25__D3>,
+							 <PIN_PA26__D4>,
+							 <PIN_PA27__D5>,
+							 <PIN_PA28__D6>,
+							 <PIN_PA29__D7>,
+							 <PIN_PA30__NWE_NANDWE>,
+							 <PIN_PB2__NRD_NANDOE>;
+						bias-pull-up;
+						atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+					};
+
+					ale_cle_rdy_cs {
+						pinmux = <PIN_PB0__A21_NANDALE>,
+							 <PIN_PB1__A22_NANDCLE>,
+							 <PIN_PC8__NANDRDY>,
+							 <PIN_PA31__NCS3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-pull-up;
+					};
+
+					ck_cd_vddsel {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_spi1_default: spi1_default {
+					pinmux = <PIN_PC1__SPI1_SPCK>,
+						 <PIN_PC2__SPI1_MOSI>,
+						 <PIN_PC3__SPI1_MISO>,
+						 <PIN_PC4__SPI1_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart0_default: uart0_default {
+					pinmux = <PIN_PB26__URXD0>,
+						 <PIN_PB27__UTXD0>;
+					bias-disable;
+				};
+
+				pinctrl_uart2_default: uart2_default {
+					pinmux = <PIN_PD23__URXD2>,
+						 <PIN_PD24__UTXD2>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PB12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PB11__GPIO>;
+					bias-disable;
+				};
+
+			};
+
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
new file mode 100644
index 0000000000000..6680031387e8c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
+
+/ {
+	model = "Atmel SAMA5D2 Xplained";
+	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart1;	/* DBGU */
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;		/* XPRO EXT2 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PB10 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			non-removable;
+			mmc-ddr-3_3v;
+			status = "okay";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay"; /* conflict with qspi0 */
+			vqmmc-supply = <&vdd_3v3_reg>;
+			vmmc-supply = <&vdd_3v3_reg>;
+		};
+
+		apb {
+			qspi0: spi@f0020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi0_default>;
+				status = "disabled"; /* conflict with sdmmc1 */
+
+				flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <80000000>;
+					spi-tx-bus-width = <4>;
+					spi-rx-bus-width = <4>;
+					m25p,fast-read;
+
+					at91bootstrap@0 {
+						label = "at91bootstrap";
+						reg = <0x00000000 0x00040000>;
+					};
+
+					bootloader@40000 {
+						label = "bootloader";
+						reg = <0x00040000 0x000c0000>;
+					};
+
+					bootloaderenvred@100000 {
+						label = "bootloader env redundant";
+						reg = <0x00100000 0x00040000>;
+					};
+
+					bootloaderenv@140000 {
+						label = "bootloader env";
+						reg = <0x00140000 0x00040000>;
+					};
+
+					dtb@180000 {
+						label = "device tree";
+						reg = <0x00180000 0x00080000>;
+					};
+
+					kernel@200000 {
+						label = "kernel";
+						reg = <0x00200000 0x00600000>;
+					};
+
+					misc@800000 {
+						label = "misc";
+						reg = <0x00800000 0x00000000>;
+					};
+				};
+			};
+
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					reg = <0>;
+					spi-max-frequency = <50000000>;
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				i2c-sda-hold-time-ns = <350>;
+				status = "okay";
+
+				pmic@5b {
+					compatible = "active-semi,act8945a";
+					reg = <0x5b>;
+					active-semi,vsel-high;
+					status = "okay";
+
+					regulators {
+						vdd_1v35_reg: REG_DCDC1 {
+							regulator-name = "VDD_1V35";
+							regulator-min-microvolt = <1350000>;
+							regulator-max-microvolt = <1350000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-on-in-suspend;
+								regulator-suspend-min-microvolt = <1400000>;
+								regulator-suspend-max-microvolt = <1400000>;
+								regulator-changeable-in-suspend;
+								regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							};
+						};
+
+						vdd_1v2_reg: REG_DCDC2 {
+							regulator-name = "VDD_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_3v3_reg: REG_DCDC3 {
+							regulator-name = "VDD_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_fuse_reg: REG_LDO1 {
+							regulator-name = "VDD_FUSE";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_3v3_lp_reg: REG_LDO2 {
+							regulator-name = "VDD_3V3_LP";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_led_reg: REG_LDO3 {
+							regulator-name = "VDD_LED";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_sdhc_1v8_reg: REG_LDO4 {
+							regulator-name = "VDD_SDHC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+					};
+
+					charger {
+						compatible = "active-semi,act8945a-charger";
+						pinctrl-names = "default";
+						pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+						interrupt-parent = <&pioA>;
+						interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>;
+
+						active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+						active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+						active-semi,input-voltage-threshold-microvolt = <6600>;
+						active-semi,precondition-timeout = <40>;
+						active-semi,total-timeout = <3>;
+						status = "okay";
+					};
+				};
+			};
+
+			pwm0: pwm@f802c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+				status = "disabled"; /* conflict with leds */
+			};
+
+			flx0: flexcom@f8034000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+				status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+
+				uart5: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					status = "okay";
+				};
+
+				i2c2: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_i2c2_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					i2c-sda-hold-time-ns = <350>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+				};
+			};
+
+			poweroff@f8048010 {
+				debounce-delay-us = <976>;
+				atmel,wakeup-rtc-timer;
+
+				input@0 {
+					reg = <0>;
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			i2s0: i2s@f8050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s0_default>;
+				status = "disabled"; /* conflict with can0 */
+			};
+
+			can0: can@f8054000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_default>;
+				status = "okay";
+			};
+
+			uart3: serial@fc008000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
+				status = "okay";
+			};
+
+			flx4: flexcom@fc018000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c6: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					pinctrl-1 = <&pinctrl_flx4_gpio>;
+					sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					status = "okay";
+				};
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				at24@54 {
+					compatible = "atmel,24c02";
+					reg = <0x54>;
+					pagesize = <16>;
+				};
+			};
+
+			adc: adc@fc030000 {
+				vddana-supply = <&vdd_3v3_lp_reg>;
+				vref-supply = <&vdd_3v3_lp_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+				status = "okay";
+			};
+
+			pinctrl@fc038000 {
+				/*
+				 * There is no real pinmux for ADC, if the pin
+				 * is not requested by another peripheral then
+				 * the muxing is done when channel is enabled.
+				 * Requesting pins for ADC is GPIO is
+				 * encouraged to prevent conflicts and to
+				 * disable bias in order to be in the same
+				 * state when the pin is not muxed to the adc.
+				 */
+				pinctrl_adc_default: adc_default {
+					pinmux = <PIN_PD23__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_can0_default: can0_default {
+					pinmux = <PIN_PC10__CANTX0>,
+						 <PIN_PC11__CANRX0>;
+					bias-disable;
+				};
+
+				pinctrl_can1_default: can1_default {
+					pinmux = <PIN_PC26__CANTX1>,
+						 <PIN_PC27__CANRX1>;
+					bias-disable;
+				};
+
+				/*
+				 * The ADTRG pin can work on any edge type.
+				 * In here it's being pulled up, so need to
+				 * connect it to ground to get an edge e.g.
+				 * Trigger can be configured on falling, rise
+				 * or any edge, and the pull-up can be changed
+				 * to pull-down or left floating according to
+				 * needs.
+				 */
+				pinctrl_adtrg_default: adtrg_default {
+					pinmux = <PIN_PD31__ADTRG>;
+					bias-pull-up;
+				};
+
+				pinctrl_charger_chglev: charger_chglev {
+					pinmux = <PIN_PA12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_irq: charger_irq {
+					pinmux = <PIN_PB13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_lbo: charger_lbo {
+					pinmux = <PIN_PC8__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_classd_default_pfets: classd_default_pfets {
+					pinmux = <PIN_PB1__CLASSD_R0>,
+						 <PIN_PB3__CLASSD_R2>;
+					bias-pull-up;
+				};
+
+				pinctrl_classd_default_nfets: classd_default_nfets {
+					pinmux = <PIN_PB2__CLASSD_R1>,
+						 <PIN_PB4__CLASSD_R3>;
+					bias-pull-down;
+				};
+
+				pinctrl_flx0_default: flx0_default {
+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+						 <PIN_PB29__FLEXCOM0_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_default: flx4_default {
+					pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+						 <PIN_PD13__FLEXCOM4_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_gpio: flx4_gpio {
+					pinmux = <PIN_PD12__GPIO>,
+						 <PIN_PD13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PD4__GPIO>,
+						 <PIN_PD5__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c2_gpio: i2c2_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2s0_default: i2s0_default {
+					pinmux = <PIN_PC1__I2SC0_CK>,
+						 <PIN_PC2__I2SC0_MCK>,
+						 <PIN_PC3__I2SC0_WS>,
+						 <PIN_PC4__I2SC0_DI0>,
+						 <PIN_PC5__I2SC0_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_i2s1_default: i2s1_default {
+					pinmux = <PIN_PA15__I2SC1_CK>,
+						 <PIN_PA14__I2SC1_MCK>,
+						 <PIN_PA16__I2SC1_WS>,
+						 <PIN_PA17__I2SC1_DI0>,
+						 <PIN_PA18__I2SC1_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PB9__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB0__GPIO>,
+						 <PIN_PB5__GPIO>,
+						 <PIN_PB6__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PC9__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_qspi0_default: qspi0_default {
+					sck_cs {
+						pinmux = <PIN_PA22__QSPI0_SCK>,
+							 <PIN_PA23__QSPI0_CS>;
+						bias-disable;
+					};
+
+					data {
+						pinmux = <PIN_PA24__QSPI0_IO0>,
+							 <PIN_PA25__QSPI0_IO1>,
+							 <PIN_PA26__QSPI0_IO2>,
+							 <PIN_PA27__QSPI0_IO3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-disable;
+					};
+
+					ck_cd_rstn {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA10__SDMMC0_RSTN>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_sdmmc1_default: sdmmc1_default {
+					cmd_data {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-disable;
+					};
+
+					conf-ck_cd {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PB11__URXD3>,
+						 <PIN_PB12__UTXD3>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PB10__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PA31__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+					pinmux = <PIN_PB5__PWMH2>,
+						 <PIN_PB6__PWML2>;
+					bias-pull-up;
+				};
+			};
+
+			classd: classd@fc048000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_classd_default_pfets &pinctrl_classd_default_nfets>;
+				atmel,pwm-type = "diff";
+				atmel,non-overlap-time = <10>;
+				status = "okay";
+			};
+
+			i2s1: i2s@fc04c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s1_default>;
+				status = "disabled"; /* conflict with spi0, sdmmc1 */
+			};
+
+			can1: can@fc050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_default>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* conflict with pwm0 */
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
+		};
+
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts
new file mode 100644
index 0000000000000..c287b03d768b6
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet
+ *    Development System board.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Jerry Ray <jerry.ray@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Ethernet Development System";
+	compatible = "microchip,sama5d3-eds", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button-3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	vcc_3v3_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vcc_2v5_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v8_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v2_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand_controller: nand-controller {
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x2>;
+			atmel,rb = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				bootloader@40000 {
+					label = "bootloader";
+					reg = <0x40000 0xc0000>;
+				};
+
+				bootloaderenvred@100000 {
+					label = "bootloader env redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				bootloaderenv@140000 {
+					label = "bootloader env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0f800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&pinctrl_i2c2_pu>;
+	status = "okay";
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	vmmc-supply = <&vcc_mmc0_reg>;
+	vqmmc-supply = <&vcc_3v3_reg>;
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_i2c2_pu: i2c2-pu {
+			atmel,pins =
+				<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_key_gpio: key-gpio-0 {
+			atmel,pins =
+				<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins =
+				<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for reset signal to the RGMII connector. */
+		pinctrl_rgmii_rstn: rgmii-rstn {
+			atmel,pins =
+				<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for an interrupt line from the RMII and RGMII connectors. */
+		pinctrl_spi_irqn: spi-irqn {
+			atmel,pins =
+				<AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_spi0_cs: spi0-cs-default {
+			atmel,pins =
+				<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_cs: spi1-cs-default {
+			atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_usb_default: usb-default {
+			atmel,pins =
+				<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		/* Reserved for VBUS fault interrupt. */
+		pinctrl_vbusfault_irqn: vbusfault-irqn {
+			atmel,pins =
+				<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_vcc_mmc0_reg_gpio: vcc-mmc0-reg-gpio-default {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi0_cs>;
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi1_cs>;
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioC 28 0>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {	/* USB Device port with VBUS detection. */
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {	/* 3-port Host. First port is unused. */
+	atmel,vbus-gpio = <0
+			   &pioE 3 GPIO_ACTIVE_HIGH
+			   &pioE 4 GPIO_ACTIVE_HIGH
+			  >;
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
new file mode 100644
index 0000000000000..14af1fd6d247d
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "EVB-KSZ9477";
+	compatible = "microchip,sama5d3-ksz9477-evb", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mcc0_vcc>;
+		regulator-name = "mmc0-vcc";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+		disable-wp;
+		vmmc-supply = <&reg_vcc_mmc0>;
+		vqmmc-supply = <&reg_3v3>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 GPIO_ACTIVE_LOW>, <0>, <0>,
+		   <&pioD 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&pinctrl_spi_ksz>;
+	cs-gpios = <&pioC 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	switch@0 {
+		compatible = "microchip,ksz9477";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpha;
+		spi-cpol;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+				phy-mode = "internal";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-mode = "internal";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-mode = "internal";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-mode = "internal";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&macb0>;
+				phy-mode = "rgmii-txid";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_mcc0_vcc: mmc0-vcc {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi_ksz: spi-ksz {
+			atmel,pins =
+				<
+				/* SPI1_MISO */
+				AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				/* SPI1_MOSI */
+				AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE
+				/* SPI1_SPCK */
+				AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE
+
+				/* SPI CS */
+				AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				/* switch IRQ */
+				AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH
+				/* switch PME_N, SoC IN */
+				AT91_PIOC 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+				/* switch RST */
+				AT91_PIOC 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH
+				>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
new file mode 100644
index 0000000000000..8200337270882
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
+ *
+ *  Copyright (C) 2014 Atmel,
+ *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SAMA5D3 Xplained";
+	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+				vmmc-supply = <&vcc_mmc0_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				vmmc-supply = <&vcc_3v3_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "disabled";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi0_cs>;
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			tcb0: timer@f0010000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			i2c0: i2c@f0014000 {
+				pinctrl-0 = <&pinctrl_i2c0_pu>;
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "disabled";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <1200000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG1 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+
+						vddana_reg: LDO_REG2 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+					};
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii-rxid";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+				};
+			};
+
+			pwm0: pwm@f002c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
+				status = "okay";
+			};
+
+			usart0: serial@f001c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f0020000 {
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			uart0: serial@f0024000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi1: spi@f8008000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
+				cs-gpios = <&pioC 25 0>;
+				status = "okay";
+			};
+
+			adc0: adc@f8018000 {
+				atmel,adc-vref = <3300>;
+				atmel,adc-channels-used = <0xfe>;
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					>;
+				status = "okay";
+			};
+
+			i2c2: i2c@f801c000 {
+				dmas = <0>, <0>;	/* Do not use DMA for i2c2 */
+				pinctrl-0 = <&pinctrl_i2c2_pu>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_i2c0_pu: i2c0_pu {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_i2c2_pu: i2c2_pu {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
+					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi0_cs: spi0_cs_default {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
+						atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@500000 {
+			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 3 GPIO_ACTIVE_LOW
+					   &pioE 4 GPIO_ACTIVE_LOW
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@700000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <4>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	vcc_mmc0_reg: fixedregulator_mmc0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
+
+		led-d2 {
+			label = "d2";
+			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-d3 {
+			label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4.dtsi
new file mode 100644
index 0000000000000..fd1086f52b404
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Aries/DENX MA5D4";
+	compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+
+		clk20m: clk20m {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <20000000>;
+			clock-output-names = "clk20m";
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+				vmmc-supply = <&vcc_mmc0_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					broken-cd;
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			spi1: spi@fc018000 {
+				cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>;
+				status = "okay";
+
+				can0: can@0 {
+					compatible = "microchip,mcp2515";
+					reg = <0>;
+					clocks = <&clk20m>;
+					interrupt-parent = <&pioE>;
+					interrupts = <6 IRQ_TYPE_EDGE_RISING>;
+					spi-max-frequency = <10000000>;
+				};
+
+				can1: can@1 {
+					compatible = "microchip,mcp2515";
+					reg = <1>;
+					clocks = <&clk20m>;
+					interrupt-parent = <&pioE>;
+					interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				atmel,adc-vref = <3300>;
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+		};
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: fixedregulator_mmc0 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
+		regulator-name = "RST_n MCI0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+		regulator-boot-on;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts
new file mode 100644
index 0000000000000..8adf567f2f0fe
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "at91-sama5d4_ma5d4.dtsi"
+
+/ {
+	model = "Aries/DENX MA5D4EVK";
+	compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	ahb {
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 14 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@600000 {
+			status = "okay";
+		};
+
+		apb {
+			hlcdc: hlcdc@f0000000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			usart0: serial@f802c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f8030000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+			};
+
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led-user1 {
+			label = "user1";
+			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			label = "user2";
+			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user3 {
+			label = "user3";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel: panel {
+		/* Actually Ampire 800480R2 */
+		compatible = "foxlink,fl500wvr00-a0t";
+		backlight = <&backlight>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	vcc_mmc1_reg: fixedregulator_mmc1 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts
new file mode 100644
index 0000000000000..95d701d13fef6
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Josh Wu <josh.wu@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Atmel SAMA5D4 Xplained";
+	compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			uart0: serial@f8004000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8014000 {
+				i2c-digital-filter;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+					reg = <1>;
+				};
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 3 0>;
+				};
+			};
+
+			usart3: serial@fc00c000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			spi1: spi@fc018000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
+				cs-gpios = <&pioB 21 0>;
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				atmel,adc-vref = <3300>;
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
+						atmel,pins =
+							<AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_HIGH
+					   &pioE 14 GPIO_ACTIVE_HIGH
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@600000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
+				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
+				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x1f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button {
+			label = "pb_user1";
+			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
+
+		led-d8 {
+			label = "d8";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-d10 {
+			label = "d10";
+			gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_mmc1_reg: fixedregulator_mmc1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
+		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts
new file mode 100644
index 0000000000000..20ac775059ca4
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Atmel SAMA5D4-EK";
+	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
+				atmel,adc-vref = <3300>;
+				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
+				status = "okay";		/* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			ssc0: ssc@f8008000 {
+				status = "okay";
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+
+				wm8904: codec@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 10>;
+					clock-names = "mclk";
+				};
+
+				qt1070:keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <25 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+
+				touchscreen@4c {
+					compatible = "atmel,maxtouch";
+					reg = <0x4c>;
+					interrupt-parent = <&pioE>;
+					interrupts = <24 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mxt_ts>;
+				};
+			};
+
+			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 6 0>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
+					};
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mxt_ts: mxt_irq {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@600000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
+				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
+				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button {
+			label = "pb_user1";
+			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led-d8 {
+			label = "d8";
+			/* PE28, conflicts with usart4 rts pin */
+			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
+		};
+
+		led-d9 {
+			label = "d9";
+			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-d10 {
+			label = "d10";
+			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D4EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
new file mode 100644
index 0000000000000..217e9b96c61e5
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
+ *
+ *  Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/sound/microchip,pdmc.h>
+
+/ {
+	model = "Microchip SAMA7G5-EK";
+	compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
+
+	chosen {
+		bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart3;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		serial3 = &uart0;
+		i2c0 = &i2c1;
+		i2c1 = &i2c8;
+		i2c2 = &i2c9;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* Conflict with pwm. */
+
+		red_led {
+			label = "red";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+		};
+
+		green_led {
+			label = "green";
+			gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue_led {
+			label = "blue";
+			gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* 512 M */
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sama7g5ek audio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			cpu {
+				sound-dai = <&spdiftx>;
+			};
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			cpu {
+				sound-dai = <&spdifrx>;
+			};
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&adc {
+	vddana-supply = <&vddout25>;
+	vref-supply = <&vddout25>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "ospi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "ospi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "ospi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "ospi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "ospi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "ospi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+
+		rootfs@800000 {
+			label = "ospi: rootfs";
+			reg = <0x800000 0x7800000>;
+		};
+
+	};
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart0: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		status = "disabled";
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		mcp16502@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			status = "okay";
+
+			regulators {
+				vdd_3v3: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddioddr: VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcore: VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1150000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcpu: VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-ramp-delay = <3125>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1050000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vldo1: LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				vldo2: LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+
+					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+			};
+		};
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart3: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart4: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "okay";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&flx8 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c8: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+	};
+};
+
+&flx9 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c9: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+	};
+};
+
+&flx11 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi11: spi@400 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gmac1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac1_default
+		     &pinctrl_gmac1_mdio_default
+		     &pinctrl_gmac1_phy_irq>;
+	phy-mode = "rmii";
+	status = "okay"; /* Conflict with pdmc0. */
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s0_default>;
+};
+
+&pdmc0 {
+	#sound-dai-cells = <0>;
+	microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 2 */
+			    <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>, /* MIC 3 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>; /* MIC 4 */
+	status = "disabled"; /* Conflict with gmac1. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdmc0_default>;
+};
+
+&pioA {
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PD12__CANTX0>,
+			 <PIN_PD13__CANRX0 >;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PD14__CANTX1>,
+			 <PIN_PD15__CANRX1 >;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_default {
+		pinmux = <PIN_PE3__FLEXCOM0_IO0>,
+			 <PIN_PE4__FLEXCOM0_IO1>,
+			 <PIN_PE6__FLEXCOM0_IO3>,
+			 <PIN_PE7__FLEXCOM0_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_flx3_default: flx3_default {
+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+			 <PIN_PD17__FLEXCOM3_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PD18__FLEXCOM4_IO0>,
+			 <PIN_PD19__FLEXCOM4_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_flx7_default: flx7_default {
+		pinmux = <PIN_PC23__FLEXCOM7_IO0>,
+			 <PIN_PC24__FLEXCOM7_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_default: gmac0_default {
+		pinmux = <PIN_PA16__G0_TX0>,
+			 <PIN_PA17__G0_TX1>,
+			 <PIN_PA26__G0_TX2>,
+			 <PIN_PA27__G0_TX3>,
+			 <PIN_PA19__G0_RX0>,
+			 <PIN_PA20__G0_RX1>,
+			 <PIN_PA28__G0_RX2>,
+			 <PIN_PA29__G0_RX3>,
+			 <PIN_PA15__G0_TXEN>,
+			 <PIN_PA30__G0_RXCK>,
+			 <PIN_PA18__G0_RXDV>,
+			 <PIN_PA25__G0_125CK>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0_mdio_default {
+		pinmux = <PIN_PA22__G0_MDC>,
+			 <PIN_PA23__G0_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txck_default: gmac0_txck_default {
+		pinmux = <PIN_PA24__G0_TXCK>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
+	pinctrl_gmac0_phy_irq: gmac0_phy_irq {
+		pinmux = <PIN_PA31__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_default: gmac1_default {
+		pinmux = <PIN_PD30__G1_TXCK>,
+			 <PIN_PD22__G1_TX0>,
+			 <PIN_PD23__G1_TX1>,
+			 <PIN_PD21__G1_TXEN>,
+			 <PIN_PD25__G1_RX0>,
+			 <PIN_PD26__G1_RX1>,
+			 <PIN_PD27__G1_RXER>,
+			 <PIN_PD24__G1_RXDV>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_mdio_default: gmac1_mdio_default {
+		pinmux = <PIN_PD28__G1_MDC>,
+			 <PIN_PD29__G1_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_phy_irq: gmac1_phy_irq {
+		pinmux = <PIN_PA21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PC9__FLEXCOM1_IO0>,
+			 <PIN_PC10__FLEXCOM1_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		pinmux = <PIN_PC14__FLEXCOM8_IO0>,
+			 <PIN_PC13__FLEXCOM8_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		pinmux = <PIN_PC18__FLEXCOM9_IO0>,
+			 <PIN_PC19__FLEXCOM9_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2s0_default: i2s0_default {
+		pinmux = <PIN_PB23__I2SMCC0_CK>,
+			 <PIN_PB24__I2SMCC0_WS>,
+			 <PIN_PB25__I2SMCC0_DOUT1>,
+			 <PIN_PB26__I2SMCC0_DOUT0>,
+			 <PIN_PB27__I2SMCC0_MCK>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PA12__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA13__GPIO>,
+			 <PIN_PB8__GPIO>,
+			 <PIN_PD20__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_an_default: mikrobus1_an_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an_default: mikrobus2_an_default {
+		pinmux = <PIN_PD1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
+		pinmux = <PIN_PA13__PWMH2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
+		pinmux = <PIN_PD20__PWMH3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PB6__FLEXCOM11_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PB3__FLEXCOM11_IO0>,
+			 <PIN_PB4__FLEXCOM11_IO1>,
+			 <PIN_PB5__FLEXCOM11_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_pdmc0_default: pdmc0_default {
+		pinmux = <PIN_PD23__PDMC0_DS0>,
+			 <PIN_PD24__PDMC0_DS1>,
+			 <PIN_PD22__PDMC0_CLK>;
+		bias_disable;
+	};
+
+	pinctrl_qspi: qspi {
+		pinmux = <PIN_PB12__QSPI0_IO0>,
+			 <PIN_PB11__QSPI0_IO1>,
+			 <PIN_PB10__QSPI0_IO2>,
+			 <PIN_PB9__QSPI0_IO3>,
+			 <PIN_PB16__QSPI0_IO4>,
+			 <PIN_PB17__QSPI0_IO5>,
+			 <PIN_PB18__QSPI0_IO6>,
+			 <PIN_PB19__QSPI0_IO7>,
+			 <PIN_PB13__QSPI0_CS>,
+			 <PIN_PB14__QSPI0_SCK>,
+			 <PIN_PB15__QSPI0_SCKN>,
+			 <PIN_PB20__QSPI0_DQS>,
+			 <PIN_PB21__QSPI0_INT>;
+		bias-disable;
+		slew-rate = <0>;
+		atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA3__SDMMC0_DAT0>,
+				 <PIN_PA4__SDMMC0_DAT1>,
+				 <PIN_PA5__SDMMC0_DAT2>,
+				 <PIN_PA6__SDMMC0_DAT3>,
+				 <PIN_PA7__SDMMC0_DAT4>,
+				 <PIN_PA8__SDMMC0_DAT5>,
+				 <PIN_PA9__SDMMC0_DAT6>,
+				 <PIN_PA10__SDMMC0_DAT7>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA2__SDMMC0_RSTN>,
+				 <PIN_PA11__SDMMC0_DS>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PB29__SDMMC1_CMD>,
+				 <PIN_PB31__SDMMC1_DAT0>,
+				 <PIN_PC0__SDMMC1_DAT1>,
+				 <PIN_PC1__SDMMC1_DAT2>,
+				 <PIN_PC2__SDMMC1_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PB30__SDMMC1_CK>,
+				 <PIN_PB28__SDMMC1_RSTN>,
+				 <PIN_PC5__SDMMC1_1V8SEL>,
+				 <PIN_PC4__SDMMC1_CD>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc2_default: sdmmc2_default {
+		cmd_data {
+			pinmux = <PIN_PD3__SDMMC2_CMD>,
+				 <PIN_PD5__SDMMC2_DAT0>,
+				 <PIN_PD6__SDMMC2_DAT1>,
+				 <PIN_PD7__SDMMC2_DAT2>,
+				 <PIN_PD8__SDMMC2_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck {
+			pinmux = <PIN_PD4__SDMMC2_CK>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_spdifrx_default: spdifrx_default {
+		pinmux = <PIN_PB0__SPDIF_RX>;
+		bias-disable;
+	};
+
+	pinctrl_spdiftx_default: spdiftx_default {
+		pinmux = <PIN_PB1__SPDIF_TX>;
+		bias-disable;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <8>;
+	non-removable;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vldo1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc2_default>;
+};
+
+&shdwc {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&spdifrx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdifrx_default>;
+	status = "okay";
+};
+
+&spdiftx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdiftx_default>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-smartkiz.dts b/arch/arm/boot/dts/microchip/at91-smartkiz.dts
new file mode 100644
index 0000000000000..b76a6b5ac464d
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-smartkiz.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz SmartKiz";
+	compatible = "overkiz,smartkiz", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+
+	aliases {
+		serial5 = &uart0;
+	};
+
+	pio_keys {
+		hk_reset {
+			label = "HK_RESET";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rf {
+			label = "POWER_RF";
+			gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_wifi {
+			label = "POWER_WIFI";
+			gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	i2c1 {
+		pinctrl_i2c1: i2c1-0 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	adc0 {
+		pinctrl_adc0_ad0: adc0_ad0-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad6: adc0_ad6-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad11: adc0_ad11-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+&macb0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad5
+		&pinctrl_adc0_ad6
+		&pinctrl_adc0_ad11
+	>;
+	atmel,adc-channels-used = <0x0861>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-som60.dtsi b/arch/arm/boot/dts/microchip/at91-som60.dtsi
new file mode 100644
index 0000000000000..39474a112b16e
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-som60.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-som60.dtsi - Device Tree file for the SOM60 module
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+#include "sama5d36.dtsi"
+
+/ {
+	model = "Laird SOM60";
+	compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins =
+				<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_en: mmc0_en {
+			atmel,pins =
+				<AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_nand0_wp: nand0_wp {
+			atmel,pins =
+				<AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_usb_vbus: usb_vbus {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+				/* Conflicts with USART2_SCK */
+		};
+
+		pinctrl_usart2_sck: usart2_sck {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_VBUS */
+		};
+
+		pinctrl_usb_oc: usb_oc {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART3_SCK */
+		};
+
+		pinctrl_usart3_sck: usart3_sck {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_OC */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+		   atmel,pins =
+				<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_geth_int: geth_int {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART1_SCK */
+		};
+
+		pinctrl_usart1_sck: usart1_sck {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+				/* Conflicts with GETH_INT */
+		};
+
+		pinctrl_eth_int: eth_int {
+			atmel,pins =
+				<AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+			atmel,pins =
+				<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&mmc0 {
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+};
+
+&usart2 {
+	pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>;
+};
+
+&usart3 {
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+};
+
+&adc0 {
+	pinctrl-0 = <
+		&pinctrl_adc0_adtrg
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad1
+		&pinctrl_adc0_ad2
+		&pinctrl_adc0_ad3
+		&pinctrl_adc0_ad4
+		&pinctrl_adc0_ad5
+		>;
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ubootspl@0 {
+				label = "u-boot-spl";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			ubi@e0000 {
+				label = "ubi";
+				reg = <0xe0000 0xfe00000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>;
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+		&pioE 20 GPIO_ACTIVE_HIGH
+		0>;
+	atmel,oc-gpio = <0
+		&pioE 15 GPIO_ACTIVE_LOW
+		0>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91-tse850-3.dts b/arch/arm/boot/dts/microchip/at91-tse850-3.dts
new file mode 100644
index 0000000000000..9d58a3931207e
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-tse850-3.dts
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "at91-linea.dtsi"
+
+/ {
+	model = "Axentia TSE-850 3.0";
+	compatible = "axentia,tse850v3", "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	sck: oscillator {
+		compatible = "fixed-clock";
+
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "sck";
+	};
+
+	reg_3v3: regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "3v3-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	ana: reg-ana {
+		compatible = "pwm-regulator";
+
+		regulator-name = "ANA";
+
+		pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
+		pwm-dutycycle-unit = <1000>;
+		pwm-dutycycle-range = <100 1000>;
+
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <20000000>;
+		regulator-ramp-delay = <1000>;
+	};
+
+	sound {
+		compatible = "axentia,tse850-pcm5142";
+
+		axentia,cpu-dai = <&ssc0>;
+		axentia,audio-codec = <&pcm5142>;
+
+		axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
+		axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+		axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
+
+		axentia,ana-supply = <&ana>;
+	};
+
+	dac: dpot-dac {
+		compatible = "dpot-dac";
+		vref-supply = <&reg_3v3>;
+		io-channels = <&dpot 0>;
+		io-channel-names = "dpot";
+		#io-channel-cells = <1>;
+	};
+
+	env_det: envelope-detector {
+		compatible = "axentia,tse850-envelope-detector";
+		io-channels = <&dac 0>;
+		io-channel-names = "dac";
+		#io-channel-cells = <1>;
+
+		interrupt-parent = <&pioA>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "comp";
+	};
+
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>,
+			    <&pioA 2 GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+	};
+
+	envelope-detector-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&env_det 0>;
+		io-channel-names = "parent";
+
+		mux-controls = <&mux>;
+
+		channels = "", "",
+			 "sync-1",
+			 "in",
+			 "out",
+			 "sync-2",
+			 "sys-reg",
+			 "ana-reg";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ch1-red {
+			label = "ch-1:red";
+			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+		};
+		led-ch1-green {
+			label = "ch-1:green";
+			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+		};
+		led-ch2-red {
+			label = "ch-2:red";
+			gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
+		};
+		led-ch2-green {
+			label = "ch-2:green";
+			gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
+		};
+		led-data-red {
+			label = "data:red";
+			gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
+		};
+		led-data-green {
+			label = "data:green";
+			gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
+		};
+		led-alarm-red {
+			label = "alarm:red";
+			gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
+		};
+		led-alarm-green {
+			label = "alarm:green";
+			gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		barebox@40000 {
+			label = "bootloader";
+			reg = <0x40000 0x60000>;
+		};
+
+		bareboxenv@c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
+		};
+
+		bareboxenv2@100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree@180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x500000>;
+		};
+
+		rootfs@800000 {
+			label = "rootfs";
+			reg = <0x800000 0x0f800000>;
+		};
+
+		ovlfs@10000000 {
+			label = "ovlfs";
+			reg = <0x10000000 0x10000000>;
+		};
+	};
+};
+
+&ssc0 {
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	jc42@18 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+		smbus-timeout-disable;
+	};
+
+	dpot: mcp4651-104@28 {
+		compatible = "microchip,mcp4651-104";
+		reg = <0x28>;
+		#io-channel-cells = <1>;
+	};
+
+	pcm5142: pcm5142@4c {
+		compatible = "ti,pcm5142";
+
+		reg = <0x4c>;
+		#sound-dai-cells = <0>;
+
+		AVDD-supply = <&reg_3v3>;
+		DVDD-supply = <&reg_3v3>;
+		CPVDD-supply = <&reg_3v3>;
+
+		clocks = <&sck>;
+
+		pll-in = <3>;
+		pll-out = <6>;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&pinctrl {
+	tse850 {
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_DEGLITCH>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&usart0 {
+	status = "okay";
+
+	atmel,use-dma-rx;
+};
+
+&pwm0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_pwm0_pwml2_1>;
+	pinctrl-names = "default";
+};
+
+&macb1 {
+	status = "okay";
+
+	phy-mode = "rmii";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	phy0: ethernet-phy@3 {
+		reg = <3>;
+
+		interrupt-parent = <&pioE>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	status = "okay";
+
+	num-ports = <1>;
+	atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+	atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>;
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+
+	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+};
+
+&pioA {
+	gpio-line-names =
+	/*  0 */	"SUP-A", "SUP-B", "SUP-C", "SIG<LEV",
+	/*  4 */	"", "/RFRST", "", "",
+	/*  8 */	"/ADD", "", "/LOOP1", "/LOOP2",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"LED1GREEN", "LED1RED", "LED2GREEN", "LED2RED",
+	/* 20 */	"LED3GREEN", "LED3RED", "LED4GREEN", "LED4RED",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "SDA", "SCL";
+};
+
+&pioB {
+	gpio-line-names =
+	/*  0 */	"", "", "", "",
+	/*  4 */	"", "", "", "",
+	/*  8 */	"", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", "", "", "",
+	/* 20 */	"", "", "", "",
+	/* 24 */	"", "", "SIG<LIN", "SIG>LIN",
+	/* 28 */	"RXD", "TXD", "BRX", "BTX";
+};
+
+&pioC {
+	gpio-line-names =
+	/*  0 */	"ETX0", "ETX1", "ERX0", "ERX1",
+	/*  4 */	"ETXEN", "ECRSDV", "ERXER", "EREFCK",
+	/*  8 */	"EMDC", "EMDIO", "", "",
+	/* 12 */	"", "", "", "/ILIM",
+	/* 16 */	"BCK", "LRCK", "DIN", "",
+	/* 20 */	"", "", "", "",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "", "VBUS";
+};
+
+&pioD {
+	gpio-line-names =
+	/*  0 */	"I1", "I2", "O1", "EXTVEN",
+	/*  4 */	"", "456KHZ", "VCTRL", "SYNCSEL",
+	/*  8 */	"STEREO", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", ">LIN", "LIN>", "",
+	/* 20 */	"VREFEN", "", "", "",
+	/* 24 */	"", "", "VINOK", "",
+	/* 28 */	"POEOK", "USBON", "POELOAD", "";
+};
+
+&pioE {
+	gpio-line-names =
+	/*  0 */	"", "", "", "",
+	/*  4 */	"", "", "", "",
+	/*  8 */	"", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", "", "", "",
+	/* 20 */	"", "ALE", "CLE", "",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "", "/ETHINT";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-vinco.dts b/arch/arm/boot/dts/microchip/at91-vinco.dts
new file mode 100644
index 0000000000000..ebeaa6ab500e4
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-vinco.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for VInCo platform
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *   2015 Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "L+G VInCo platform";
+	compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+
+			adc0: adc@fc034000 {
+				status = "okay"; /* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+					     &pinctrl_mmc0_dat1_3
+					     &pinctrl_mmc0_dat4_7>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				vmmc-supply = <&vcc_3v3_reg>;
+				no-1-8-v;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					non-removable;
+					broken-cd;
+					status = "okay";
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				flash@0 {
+					compatible = "n25q32b", "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f8018000 {
+				status = "okay";
+				/* kerkey security module */
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+					interrupt-parent = <&pioB>;
+					interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+				};
+
+			};
+
+			i2c2: i2c@f8024000 {
+				status = "okay";
+
+				rtc1: rtc@32 {
+					compatible = "epson,rx8900";
+					reg = <0x32>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				/* MBUS */
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				/* debug */
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				/* LMN */
+				pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			macb1: ethernet@fc028000 {
+				phy-mode = "rmii";
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+					reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+						<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "disable";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "disable";
+		};
+
+		usb2: ehci@600000 {
+			/* 4G Modem */
+			status = "okay";
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led_err {
+			label = "err";
+			gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_rssi {
+			label = "rssi";
+			gpios = <&pioA 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_tls {
+			label = "tls";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_lmc {
+			label = "lmc";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_wmt {
+			label = "wmt";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_pwr {
+			label = "pwr";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-wb45n.dts b/arch/arm/boot/dts/microchip/at91-wb45n.dts
new file mode 100644
index 0000000000000..ef73f727f7bde
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-wb45n.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dts - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+/dts-v1/;
+#include "at91-wb45n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button {
+			label = "IRQBTN";
+			linux,code = <99>;
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&usart0 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-wb45n.dtsi b/arch/arm/boot/dts/microchip/at91-wb45n.dtsi
new file mode 100644
index 0000000000000..430c75358086f
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-wb45n.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dtsi - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	atheros {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+	};
+};
+
+&reset_controller {
+	compatible = "atmel,sama5d3-rstc";
+};
+
+&shutdown_controller {
+	atmel,wakeup-mode = "low";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&ebi {
+	status = "okay";
+	nand_controller: nand-controller {
+		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bs";
+					reg = <0x0 0x20000>;
+				};
+
+				uboot@20000 {
+					label = "u-boot";
+					reg = <0x20000 0x80000>;
+				};
+
+				ubootenv@a0000 {
+					label = "u-boot-env";
+					reg = <0xa0000 0x20000>;
+				};
+
+				ubootenv@c0000 {
+					label = "redund-env";
+					reg = <0xc0000 0x20000>;
+				};
+
+				kernel-a@e0000 {
+					label = "kernel-a";
+					reg = <0xe0000 0x280000>;
+				};
+
+				kernel-b@360000 {
+					label = "kernel-b";
+					reg = <0x360000 0x280000>;
+				};
+
+				rootfs-a@5e0000 {
+					label = "rootfs-a";
+					reg = <0x5e0000 0x2600000>;
+				};
+
+				rootfs-b@2be0000 {
+					label = "rootfs-b";
+					reg = <0x2be0000 0x2600000>;
+				};
+
+				user@51e0000 {
+					label = "user";
+					reg = <0x51e0000 0x2dc0000>;
+				};
+
+				logs@7fa0000 {
+					label = "logs";
+					reg = <0x7fa0000 0x60000>;
+				};
+
+			};
+		};
+	};
+};
+
+&usb0 {
+	num-ports = <2>;
+	atmel,vbus-gpio = <
+		&pioB 12 GPIO_ACTIVE_HIGH
+		&pioA 31 GPIO_ACTIVE_HIGH
+		>;
+	atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+};
+
+&macb0 {
+	phy-mode = "rmii";
+};
+
+&spi0 {
+	cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
+};
+
+&usb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_usb2>;
+	atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl {
+	usb2 {
+		pinctrl_board_usb2: usb2-board {
+			atmel,pins =
+				<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB11 gpio vbus sense, deglitch */
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-wb50n.dts b/arch/arm/boot/dts/microchip/at91-wb50n.dts
new file mode 100644
index 0000000000000..ec2becf6133ba
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-wb50n.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dts - Device Tree file for wb50n evaluation board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "BTNESC";
+			linux,code = <1>; /* ESC button */
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "IRQBTN";
+			linux,code = <99>; /* SysReq button */
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "wb50n:blue:led0";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "wb50n:green:led1";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "wb50n:red:led2";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-wb50n.dtsi b/arch/arm/boot/dts/microchip/at91-wb50n.dtsi
new file mode 100644
index 0000000000000..74b249bb63519
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-wb50n.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "sama5d31.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&clk32k {
+	atmel,osc-bypass;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+	status = "okay";
+	atheros@0 {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&dbgu {
+	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+	dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
+};
+
+/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
+&usart3 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+	status = "okay";
+};
+
+&spi1 {
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			at91bootstrap@0 {
+				label = "at91bs";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			kernel-a@e0000 {
+				label = "kernel-a";
+				reg = <0xe0000 0x500000>;
+			};
+
+			kernel-b@5e0000 {
+				label = "kernel-b";
+				reg = <0x5e0000 0x500000>;
+			};
+
+			rootfs-a@ae0000 {
+				label = "rootfs-a";
+				reg = <0xae0000 0x3000000>;
+			};
+
+			rootfs-b@3ae0000 {
+				label = "rootfs-b";
+				reg = <0x3ae0000 0x3000000>;
+			};
+
+			user@6ae0000 {
+				label = "user";
+				reg = <0x6ae0000 0x14e0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
+	atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91rm9200.dtsi b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
new file mode 100644
index 0000000000000..37b500f6f3956
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
@@ -0,0 +1,729 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2012 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on at91sam9260.dtsi
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91RM9200 family SoC";
+	compatible = "atmel,at91rm9200";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		ssc2 = &ssc2;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm920t";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00200000 0x4000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <25 26 27 28 29 30 31>;
+			};
+
+			ramc0: ramc@ffffff00 {
+				compatible = "atmel,at91rm9200-sdramc", "syscon";
+				reg = <0xffffff00 0x100>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			st: timer@fffffd00 {
+				compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
+				reg = <0xfffffd00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+
+				watchdog {
+					compatible = "atmel,at91rm9200-wdt";
+				};
+			};
+
+			rtc: rtc@fffffe00 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffe00 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
+					      18 IRQ_TYPE_LEVEL_HIGH 0
+					      19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffa4000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa4000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
+					      21 IRQ_TYPE_LEVEL_HIGH 0
+					      22 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			i2c0: i2c@fffb8000 {
+				compatible = "atmel,at91rm9200-i2c";
+				reg = <0xfffb8000 0x4000>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_twi>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffb4000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffb4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffd0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd0000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffd4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd4000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc2: ssc@fffd8000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd8000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91rm9200-emac", "cdns,emac";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				phy-mode = "rmii";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "ether_clk";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask = <
+					/*    A         B     */
+					 0xffffffff 0xffffffff  /* pioA */
+					 0xffffffff 0x083fffff  /* pioB */
+					 0xffff3fff 0x00000000  /* pioC */
+					 0x03ff87ff 0x0fffff80  /* pioD */
+					>;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_uart0_cts: uart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A */
+					};
+
+					pinctrl_uart0_rts: uart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_uart1_rts: uart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB24 periph A */
+					};
+
+					pinctrl_uart1_cts: uart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
+					};
+
+					pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
+							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
+					};
+
+					pinctrl_uart1_dcd: uart1_dcd-0 {
+						atmel,pins =
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
+					};
+
+					pinctrl_uart1_ri: uart1_ri-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_uart2_rts: uart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
+					};
+
+					pinctrl_uart2_cts: uart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA31 periph B */
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_uart3_rts: uart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_uart3_cts: uart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PC2 gpio RDY pin pull_up */
+							 AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PB1 gpio CD pin pull_up */
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA7 periph A */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA8 periph A */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA16 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB12 periph B */
+							 AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB13 periph B */
+							 AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB15 periph B */
+							 AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB16 periph B */
+							 AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB17 periph B */
+							 AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB18 periph B */
+							 AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB19 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA27 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA29 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB3 periph B with pullup */
+							 AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB4 periph B with pullup */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PB5 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA8 periph B with pullup */
+							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA9 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA10 periph B with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA12 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
+					};
+				};
+
+				ssc2 {
+					pinctrl_ssc2_tx: ssc2_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A */
+					};
+
+					pinctrl_ssc2_rx: ssc2_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
+					};
+				};
+
+				twi {
+					pinctrl_twi: twi-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE	/* PA25 periph A with multi drive */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 periph A with multi drive */
+					};
+
+					pinctrl_twi_gpio: twi_gpio-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA25 GPIO with multi drive */
+							 AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 GPIO with multi drive */
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fffc0000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffc4000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffc8000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffcc000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffcc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usb1: gadget@fffb0000 {
+				compatible = "atmel,at91rm9200-udc";
+				reg = <0xfffb0000 0x4000>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffe0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffe0000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			nand-ecc-mode = "soft";
+			gpios = <&pioC 2 GPIO_ACTIVE_HIGH
+				 0
+				 &pioB 1 GPIO_ACTIVE_HIGH
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@300000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00300000 0x100000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 4>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_twi_gpio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91rm9200_pqfp.dtsi b/arch/arm/boot/dts/microchip/at91rm9200_pqfp.dtsi
new file mode 100644
index 0000000000000..c3d4177b98238
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91rm9200_pqfp.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC
+ *
+ * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91rm9200.dtsi"
+
+/ {
+	compatible = "atmel,at91rm9200-pqfp", "atmel,at91rm9200";
+};
+
+&pioD {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/microchip/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
new file mode 100644
index 0000000000000..4624a6f076f81
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
+ *
+ *  Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
+ */
+/dts-v1/;
+#include "at91rm9200.dtsi"
+
+/ {
+	model = "Atmel AT91RM9200 evaluation kit";
+	compatible = "atmel,at91rm9200ek", "atmel,at91rm9200";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffb0000 {
+				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
+				atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				phy0: ethernet-phy {
+					interrupt-parent = <&pioC>;
+					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+				};
+			};
+
+			usart1: serial@fffc4000 {
+				pinctrl-0 =
+						<&pinctrl_uart1
+						 &pinctrl_uart1_rts
+						 &pinctrl_uart1_cts
+						 &pinctrl_uart1_dtr_dsr
+						 &pinctrl_uart1_dcd
+						 &pinctrl_uart1_ri>;
+				status = "okay";
+			};
+
+			spi0: spi@fffe0000 {
+				status = "okay";
+				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			rtc: rtc@fffffe00 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@300000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		flash@10000000 {
+			compatible = "cfi-flash";
+			reg = <0x10000000 0x800000>;
+			linux,mtd-name = "physmap-flash.0";
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			barebox@0 {
+				label = "barebox";
+				reg = <0x00000 0x40000>;
+			};
+
+			bareboxenv@40000 {
+				label = "bareboxenv";
+				reg = <0x40000 0x10000>;
+			};
+
+			kernel@50000 {
+				label = "kernel";
+				reg = <0x50000 0x300000>;
+			};
+
+			root@350000  {
+				label = "root";
+				reg = <0x350000 0x4B0000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds2 {
+			label = "green";
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		ds4 {
+			label = "yellow";
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds6 {
+			label = "red";
+			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9260.dtsi b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
new file mode 100644
index 0000000000000..35a007365b6a5
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
@@ -0,0 +1,796 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9260 family SoC";
+	compatible = "atmel,at91sam9260";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		serial6 = &uart1;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <5000000>;
+		};
+	};
+
+	sram0: sram@2ff000 {
+		compatible = "mmio-sram";
+		reg = <0x002ff000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x002ff000 0x2000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9260-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9260-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+			};
+
+			shdwc: poweroff@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
+					      18 IRQ_TYPE_LEVEL_HIGH 0
+					      19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffdc000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffdc000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
+					      27 IRQ_TYPE_LEVEL_HIGH 0
+					      28 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 28>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc00c3b  /* pioA */
+				       0xffffffff 0x7fff3ccf  /* pioB */
+				       0xffffffff 0x007fffff  /* pioC */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A */
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A */
+							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB22 periph A */
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB28 periph A */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB29 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA19 periph A */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA20 periph A */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA23 periph B */
+							 AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+
+					pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA10 periph B */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA11 periph B */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA6 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA9 periph A with pullup */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA10 periph A with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA11 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA1 periph B with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA0 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA5 periph B with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA4 periph B with pullup */
+							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA3 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB20 periph A */
+							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB21 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI1_MISO pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI1_MOSI pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI1_SPCK pin */
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
+							 AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffd0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart0: serial@fffd4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@fffd8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffc4000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffc4000 0x100>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91sam9260-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffc8000 0x200>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffe0000 {
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xfffe0000 0x100>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xf>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <15>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				status = "disabled";
+			};
+
+			watchdog: watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd50 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd50 0x10>;
+				status = "disabled";
+			};
+		};
+
+		usb0: ohci@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9260-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000
+				  0x6 0x0 0x70000000 0x10000000
+				  0x7 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9260-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c_gpio0: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
new file mode 100644
index 0000000000000..720c15472c4a5
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Atmel at91sam9260 Evaluation Kit
+ *
+ *  Copyright (C) 2016 Atmel,
+ *		  2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Atmel at91sam9260ek";
+	compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				flash@1 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			shdwc: poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		button-4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "atmel,24c512";
+			reg = <0x50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9261.dtsi b/arch/arm/boot/dts/microchip/at91sam9261.dtsi
new file mode 100644
index 0000000000000..528ffc6f6f962
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9261.dtsi
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9261 family SoC";
+	compatible = "atmel,at91sam9261";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		ssc2 = &ssc2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x28000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x28000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: ohci@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 16>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		fb0: fb@600000 {
+			compatible = "atmel,at91sam9261-lcdc";
+			reg = <0x00600000 0x1000>;
+			interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_SYSTEM 17>;
+			clock-names = "lcdc_clk", "hclk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9261-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000
+				  0x6 0x0 0x70000000 0x10000000
+				  0x7 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9261-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91sam9261-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				atmel,matrix = <&matrix>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9261-i2c";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c_twi>;
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000{
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc2: ssc@fffc4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffc8000 0x200>;
+				cs-gpios = <0>, <0>, <0>, <0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ramc: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9261-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+
+				atmel,mux-mask =
+				      /*    A         B     */
+				      <0xffffffff 0xfffffff7>,  /* pioA */
+				      <0xffffffff 0xfffffff4>,  /* pioB */
+				      <0xffffffff 0xffffff07>;  /* pioC */
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+					};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc2 {
+					pinctrl_ssc2_tx: ssc2_tx-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc2_rx: ssc2_rx-0 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c_bitbang: i2c-0-bitbang {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_i2c_twi: i2c-0-twi {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9261-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			poweroff@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd50 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd50 0x10>;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_bitbang>;
+		gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9261ek.dts b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
new file mode 100644
index 0000000000000..045cb253f23a6
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ */
+/dts-v1/;
+#include "at91sam9261.dtsi"
+
+/ {
+	model = "Atmel at91sam9261ek";
+	compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		usb0: ohci@500000 {
+			status = "okay";
+		};
+
+		fb0: fb@600000 {
+			display = <&display0>;
+			atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
+			status = "okay";
+
+			display0: panel {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "BRG";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+
+		apb {
+			tcb0: timer@fffa0000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer1: timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					reg = <0>;
+					spi-max-frequency = <15000000>;
+				};
+
+				tsc2046@2 {
+					reg = <2>;
+					compatible = "ti,ads7843";
+					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
+					spi-max-frequency = <3000000>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
+
+					ti,x-min = /bits/ 16 <150>;
+					ti,x-max = /bits/ 16 <3830>;
+					ti,y-min = /bits/ 16 <190>;
+					ti,y-max = /bits/ 16 <3830>;
+					ti,vref-delay-usecs = /bits/ 16 <450>;
+					ti,x-plate-ohms = /bits/ 16 <450>;
+					ti,y-plate-ohms = /bits/ 16 <250>;
+					ti,pressure-max = /bits/ 16 <15000>;
+					ti,debounce-rep = /bits/ 16 <0>;
+					ti,debounce-tol = /bits/ 16 <65535>;
+					ti,debounce-max = /bits/ 16 <1>;
+
+					wakeup-source;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds8 {
+			label = "ds8";
+			gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		ds7 {
+			label = "ds7";
+			gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "button_0";
+			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "button_1";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			linux,code = <257>;
+			wakeup-source;
+		};
+
+		button-2 {
+			label = "button_2";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			linux,code = <258>;
+			wakeup-source;
+		};
+
+		button-3 {
+			label = "button_3";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			linux,code = <259>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9263.dtsi b/arch/arm/boot/dts/microchip/at91sam9263.dtsi
new file mode 100644
index 0000000000000..75d8ff2d12c8a
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9263.dtsi
@@ -0,0 +1,839 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9263 family SoC";
+	compatible = "atmel,at91sam9263";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram0: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x14000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x14000>;
+	};
+
+	sram1: sram@500000 {
+		compatible = "mmio-sram";
+		reg = <0x00500000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00500000 0x4000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <30 31>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9263-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			ramc0: ramc@ffffe200 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffe200 0x200>;
+			};
+
+			smc0: smc@ffffe400 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffe400 0x200>;
+			};
+
+			ramc1: ramc@ffffe800 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffe800 0x200>;
+			};
+
+			smc1: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			matrix: matrix@ffffec00 {
+				compatible = "atmel,at91sam9263-matrix", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			tcb0: timer@fff7c000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfff7c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			poweroff@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xfffffffb 0xffffe07f  /* pioA */
+				       0x0007ffff 0x39072fff  /* pioB */
+				       0xffffffff 0x3ffffff8  /* pioC */
+				       0xfffffbff 0xffffffff  /* pioD */
+				       0xffe00fff 0xfbfcff00  /* pioE */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA28 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA29 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD7 periph B */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD8 periph B */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD5 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD6 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC25 periph B */
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
+							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
+							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
+							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
+							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
+							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
+							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
+							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC22 periph B */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC23 periph B */
+							 AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC24 periph B */
+							 AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC25 periph B */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
+							 AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE22 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA12 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA0 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA3 periph A with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA4 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA5 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA17 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk: mmc1_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA6 periph A */
+					};
+
+					pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA8 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA9 periph A with pullup */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA10 periph A with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA11 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA21 periph A with pullup */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA22 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA23 periph A with pullup */
+							 AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA24 periph A with pullup */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA25 periph A with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB0 periph B */
+							 AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB1 periph B */
+							 AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB3 periph B */
+							 AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA0 periph B SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA1 periph B SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA2 periph B SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A SPI1_MISO pin */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A SPI1_MOSI pin */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A SPI1_SPCK pin */
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB9 periph B */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 periph A */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 periph A */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC12 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC18 periph A */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC24 periph A */
+							 AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC17 periph B */
+							 AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC26 periph A */
+							 AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC27 periph A */
+					};
+				};
+
+				can {
+					pinctrl_can_rx_tx: can_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* CANRX, conflicts with IRQ0 */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* CANTX, conflicts with PCK0 */
+					};
+				};
+
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A AC97FS pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A AC97CK pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A AC97TX pin */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A AC97RX pin */
+					};
+				};
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fff8c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fff90000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fff94000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fff98000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfff98000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fff9c000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfff9c000 0x4000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ac97: sound@fffa0000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffbc000 0x100>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			usb1: gadget@fff78000 {
+				compatible = "atmel,at91sam9263-udc";
+				reg = <0xfff78000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fff88000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfff88000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fff80000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff80000 0x600>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fff84000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff84000 0x600>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			spi0: spi@fffa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa4000 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa8000 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@fffb8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffb8000 0x300>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "pwm_clk";
+				status = "disabled";
+			};
+
+			can: can@fffac000 {
+				compatible = "atmel,at91sam9263-can";
+				reg = <0xfffac000 0x300>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "can_clk";
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			rtc@fffffd50 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd50 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x50>;
+				status = "disabled";
+			};
+		};
+
+		fb0: fb@700000 {
+			compatible = "atmel,at91sam9263-lcdc";
+			reg = <0x00700000 0x1000>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 26>;
+			clock-names = "lcdc_clk", "hclk";
+			status = "disabled";
+		};
+
+		usb0: ohci@a00000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00a00000 0x100000>;
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		ebi0: ebi@10000000 {
+			compatible = "atmel,at91sam9263-ebi0";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc0>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller0: nand-controller {
+				compatible = "atmel,at91sam9260-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		ebi1: ebi@70000000 {
+			compatible = "atmel,at91sam9263-ebi1";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc1>;
+			atmel,matrix = <&matrix>;
+			reg = <0x80000000 0x20000000>;
+			ranges = <0x0 0x0 0x80000000 0x10000000
+				  0x1 0x0 0x90000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller1: nand-controller {
+				compatible = "atmel,at91sam9260-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
+			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
new file mode 100644
index 0000000000000..ce8baff6a9f4e
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+	model = "Atmel at91sam9263ek";
+	compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <16367660>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fff8c000 {
+				pinctrl-0 = <
+					&pinctrl_usart0
+					&pinctrl_usart0_rts
+					&pinctrl_usart0_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH 	/* PE18 gpio CD pin pull up and deglitch */
+							 AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PE19 gpio WP pin pull up */
+					};
+				};
+			};
+
+			spi0: spi@fffa4000 {
+				status = "okay";
+				cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		fb0: fb@700000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: panel {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		ebi0: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@a00000 {
+			num-ports = <2>;
+			status = "okay";
+			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
+					   &pioA 21 GPIO_ACTIVE_HIGH
+					  >;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d3 {
+			label = "d3";
+			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		d2 {
+			label = "d2";
+			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-left-click {
+			label = "left_click";
+			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+
+		button-right-click {
+			label = "right_click";
+			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "atmel,24c512";
+			reg = <0x50>;
+			pagesize = <128>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g15.dtsi b/arch/arm/boot/dts/microchip/at91sam9g15.dtsi
new file mode 100644
index 0000000000000..dde88276fe523
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g15.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G15 SoC";
+	compatible = "atmel,at91sam9g15", "atmel,at91sam9x5";
+};
+
+&pinctrl {
+	atmel,mux-mask = <
+	      /*    A         B          C     */
+	       0xffffffff 0xffe0399f 0x00000000  /* pioA */
+	       0x00040000 0x00047e3f 0x00000000  /* pioB */
+	       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+	       0x003fffff 0x003f8000 0x00000000  /* pioD */
+	      >;
+};
+
+&pmc {
+	compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon";
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g15ek.dts b/arch/arm/boot/dts/microchip/at91sam9g15ek.dts
new file mode 100644
index 0000000000000..889a5097eb2d4
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g15ek.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g15.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G15-EK";
+	compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
+	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
+};
+
+&hlcdc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20.dtsi
new file mode 100644
index 0000000000000..738a43ffd2281
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g20.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G20 family SoC";
+	compatible = "atmel,at91sam9g20";
+
+	memory@20000000 {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	sram0: sram@2ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@2fc000 {
+		compatible = "mmio-sram";
+		reg = <0x002fc000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x002fc000 0x8000>;
+	};
+
+	ahb {
+		apb {
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9g20-i2c";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91sam9rl-ssc";
+			};
+
+			adc0: adc@fffe0000 {
+				atmel,adc-startup-time = <40>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9g20-pmc", "atmel,at91sam9260-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
new file mode 100644
index 0000000000000..6de7a7cd3c078
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20ek_common.dtsi"
+
+/ {
+	model = "Atmel at91sam9g20ek";
+	compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
new file mode 100644
index 0000000000000..2db95e8ffc643
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20ek_common.dtsi"
+
+/ {
+	model = "Atmel at91sam9g20ek 2 mmc";
+	compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	ahb {
+		apb{
+			mmc0: mmc@fffa8000 {
+				/* clk already mux wuth slot0 */
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot0
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				mmc0_slot0 {
+					pinctrl_board_mmc0_slot0: mmc0_slot0-board {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC2 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
new file mode 100644
index 0000000000000..565b99e79c520
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				board {
+					pinctrl_pck0_as_mck: pck0_as_mck {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC1 periph B */
+					};
+
+				};
+
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC9 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				flash@1 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			shdwc: poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "atmel,24c512";
+			reg = <0x50>;
+			vcc-supply = <&reg_3v3>;
+		};
+
+		wm8731: wm8731@1b {
+			compatible = "wm8731";
+			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
+
+			HPVDD-supply = <&vcc_dac>;
+			AVDD-supply = <&vcc_dac>;
+			DCVDD-supply = <&reg_3v3>;
+			DBVDD-supply = <&reg_3v3>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		button-4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "atmel,at91sam9g20ek-wm8731-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+		atmel,model = "wm8731 @ AT91SAMG20EK";
+
+		atmel,audio-routing =
+			"Ext Spk", "LHPOUT",
+			"Int Mic", "MICIN";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
+
+	reg_5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1v: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vcc_dac: fixedregulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DAC";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
new file mode 100644
index 0000000000000..92f2c05c873f6
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the GARDENA smart Gateway (Article No. 19000)
+ *
+ *  Copyright (C) 2020 GARDENA GmbH
+ */
+
+/dts-v1/;
+
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "GARDENA smart Gateway (Article No. 19000)";
+	compatible = "gardena,smart-gateway-at91sam", "atmel,at91sam9g25", "atmel,at91sam9x5",
+		"atmel,at91sam9";
+
+	aliases {
+		serial1 = &usart3;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button {
+			label = "USER_BTN1";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+		};
+	};
+
+	1wire_cm {
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_blue {
+			label = "smartgw:power:blue";
+			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power_green {
+			label = "smartgw:power:green";
+			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		power_red {
+			label = "smartgw:power:red";
+			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_blue {
+			label = "smartgw:radio:blue";
+			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_green {
+			label = "smartgw:radio:green";
+			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_red {
+			label = "smartgw:radio:red";
+			gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_blue {
+			label = "smartgw:internet:blue";
+			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_green {
+			label = "smartgw:internet:green";
+			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_red {
+			label = "smartgw:internet:red";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat {
+			label = "smartgw:heartbeat";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pb18 {
+			status = "disabled";
+		};
+
+		pd21 {
+			status = "disabled";
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&usart0 {
+	status = "disabled";
+};
+
+&usart2 {
+	status = "disabled";
+};
+
+&usart3 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_usart3
+		     &pinctrl_usart3_rts
+		     &pinctrl_usart3_cts
+		    >;
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "disabled";
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&adc0 {
+	status = "disabled";
+};
+
+&ssc0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g25.dtsi b/arch/arm/boot/dts/microchip/at91sam9g25.dtsi
new file mode 100644
index 0000000000000..ec3c77221881c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g25.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_isi.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25 SoC";
+	compatible = "atmel,at91sam9g25", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
+				       0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g25ek.dts b/arch/arm/boot/dts/microchip/at91sam9g25ek.dts
new file mode 100644
index 0000000000000..61b0bdb615dc6
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g25ek.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&i2c0 {
+	camera@30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+		resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+		pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+		clock-names = "xvclk";
+		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+		assigned-clock-rates = <25000000>;
+		status = "okay";
+
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&isi_0>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&isi {
+	status = "okay";
+
+	port {
+		isi_0: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			vsync-active = <1>;
+			hsync-active = <1>;
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g35.dtsi b/arch/arm/boot/dts/microchip/at91sam9g35.dtsi
new file mode 100644
index 0000000000000..c9cfb93092ee6
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g35.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35 SoC";
+	compatible = "atmel,at91sam9g35", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g35ek.dts b/arch/arm/boot/dts/microchip/at91sam9g35ek.dts
new file mode 100644
index 0000000000000..f966b56de63c2
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g35ek.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g35.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35-EK";
+	compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
+	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
+};
+
+&hlcdc {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
new file mode 100644
index 0000000000000..7cccc606e36cd
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
@@ -0,0 +1,1023 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
+ *                    applies to AT91SAM9G45, AT91SAM9M10,
+ *                    AT91SAM9G46, AT91SAM9M11 SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9G45 family SoC";
+	compatible = "atmel,at91sam9g45";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <300000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			ramc0: ramc@ffffe400 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe400 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			ramc1: ramc@ffffe600 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe600 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			smc: smc@ffffe800 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffe800 0x200>;
+			};
+
+			matrix: matrix@ffffea00 {
+				compatible = "atmel,at91sam9g45-matrix", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9g45-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+
+			poweroff@fffffd10 {
+				compatible = "atmel,at91sam9rl-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			tcb0: timer@fff7c000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfff7c000 0x100>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffd4000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffd4000 0x100>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			dma: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc003ff  /* pioA */
+				       0xffffffff 0x800f8f00  /* pioB */
+				       0xffffffff 0x00000e00  /* pioC */
+				       0xffffffff 0xff0c1381  /* pioD */
+				       0xffffffff 0x81ffff81  /* pioE */
+				      >;
+
+				/* shared pinctrl settings */
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97RX */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97TX */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97FS */
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* AC97CK */
+					};
+				};
+
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA21 periph A TWCK0 */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A TWD0 */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A TWCK1 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A TWD1 */
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
+							AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
+							AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
+							AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
+							AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
+							AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
+							AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
+							AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
+							AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
+							AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
+							AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
+							AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
+							AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB17 periph B */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD17 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC9 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC11 periph B */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA24 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA19 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA6 periph B */
+							 AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA7 periph B */
+							 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA8 periph B */
+							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA9 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA29 periph B */
+							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA2 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA3 periph A with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA4 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA5 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA9 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA31 periph A */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA22 periph A with pullup */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA23 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA24 periph A with pullup */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA25 periph A with pullup */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA26 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA27 periph A with pullup */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA29 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA30 periph A with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD0 periph A */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD1 periph A */
+							 AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD3 periph A */
+							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD4 periph A */
+							 AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD13 periph A */
+							 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD14 periph A */
+							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD15 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI0_MISO pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI0_MOSI pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A SPI1_MISO pin */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A SPI1_MOSI pin */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB16 periph A SPI1_SPCK pin */
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE0 periph A */
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE2 periph A */
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE3 periph A */
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE4 periph A */
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE5 periph A */
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE6 periph A */
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE7 periph A */
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE8 periph A */
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE9 periph A */
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE10 periph A */
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE11 periph A */
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE12 periph A */
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE13 periph A */
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE14 periph A */
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE15 periph A */
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE16 periph A */
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE17 periph A */
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE18 periph A */
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE19 periph A */
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE20 periph A */
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE22 periph A */
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
+							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
+							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
+							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
+							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
+							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
+							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
+							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
+					};
+				};
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				reg = <0xffffee00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fff8c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fff90000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fff94000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fff98000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff98000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffbc000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			trng@fffcc000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfffcc000 0x100>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+			};
+
+			i2c0: i2c@fff84000 {
+				compatible = "atmel,at91sam9g10-i2c";
+				reg = <0xfff84000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fff88000 {
+				compatible = "atmel,at91sam9g10-i2c";
+				reg = <0xfff88000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@fff9c000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfff9c000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffa0000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ac97: sound@fffac000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffac000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffb0000 {
+				compatible = "atmel,at91sam9g45-adc";
+				reg = <0xfffb0000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0xff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+			};
+
+			isi@fffb4000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xfffb4000 0x4000>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			pwm0: pwm@fffb8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffb8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fff80000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff80000 0x600>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fffd0000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffd0000 0x600>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
+				dma-names = "rxtx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			spi0: spi@fffa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa4000 0x200>;
+				interrupts = <14 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa8000 0x200>;
+				interrupts = <15 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			usb2: gadget@fff78000 {
+				compatible = "atmel,at91sam9g45-udc";
+				reg = <0x00600000 0x80000
+				       0xfff78000 0x400>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			rtc@fffffdb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffdb0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x10>;
+				status = "disabled";
+			};
+		};
+
+		fb0: fb@500000 {
+			compatible = "atmel,at91sam9g45-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "hclk", "lcdc_clk";
+			status = "disabled";
+		};
+
+		usb0: ohci@700000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb1: ehci@800000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00800000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9g45-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts
new file mode 100644
index 0000000000000..7f45e81ca165c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g45.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Atmel AT91SAM9M10G45-EK";
+	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@70000000 {
+		reg = <0x70000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+		      clock-frequency = <32768>;
+		};
+
+		main_xtal {
+		      clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart1: serial@fff90000 {
+				pinctrl-0 =
+					<&pinctrl_usart1
+					 &pinctrl_usart1_rts
+					 &pinctrl_usart1_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			i2c0: i2c@fff84000 {
+				status = "okay";
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			i2c1: i2c@fff88000 {
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			mmc1: mmc@fffd0000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc1
+					&pinctrl_mmc1_slot0_clk_cmd_dat0
+					&pinctrl_mmc1_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				camera_sensor {
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD10 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				mmc1 {
+					pinctrl_board_mmc1: mmc1-board {
+						atmel,pins =
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* PD11 gpio CD pin pull up and deglitch */
+							 AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PD29 gpio WP pin pull up */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm_leds: pwm-led {
+						atmel,pins =
+							<AT91_PIOD 0  AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PD0 periph B */
+							 AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PD31 periph B */
+					};
+				};
+			};
+
+			spi0: spi@fffa4000{
+				status = "okay";
+				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <13000000>;
+					reg = <0>;
+				};
+			};
+
+			usb2: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			ac97: sound@fffac000 {
+				status = "okay";
+			};
+
+			adc0: adc@fffb0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
+			isi@fffb4000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				status = "okay";
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			pwm0: pwm@fffb8000 {
+				status = "okay";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm_leds>;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd60 {
+				status = "okay";
+			};
+
+			rtc@fffffdb0 {
+				status = "okay";
+			};
+		};
+
+		fb0: fb@500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: panel {
+				bits-per-pixel = <32>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <9>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <9000000>;
+						hactive = <480>;
+						vactive = <272>;
+						hback-porch = <1>;
+						hfront-porch = <1>;
+						vback-porch = <40>;
+						vfront-porch = <1>;
+						hsync-len = <45>;
+						vsync-len = <1>;
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						boot@0 {
+							label = "bootstrap/uboot/kernel";
+							reg = <0x0 0x400000>;
+						};
+
+						rootfs@400000 {
+							label = "rootfs";
+							reg = <0x400000 0x3C00000>;
+						};
+
+						data@4000000 {
+							label = "data";
+							reg = <0x4000000 0xC000000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@700000 {
+			status = "okay";
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
+					   &pioD 3 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1: ehci@800000 {
+			status = "okay";
+		};
+	};
+
+	led-controller-1 {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "d8";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led-controller-2 {
+		compatible = "pwm-leds";
+
+		led-2 {
+			label = "d6";
+			pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		led-3 {
+			label = "d7";
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-left-click {
+			label = "left_click";
+			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+
+		button-right-click {
+			label = "right_click";
+			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+
+		button-left {
+			label = "Joystick Left";
+			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
+			linux,code = <105>;
+		};
+
+		button-right {
+			label = "Joystick Right";
+			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
+			linux,code = <106>;
+		};
+
+		button-up {
+			label = "Joystick Up";
+			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
+			linux,code = <103>;
+		};
+
+		button-down {
+			label = "Joystick Down";
+			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
+			linux,code = <108>;
+		};
+
+		button-enter {
+			label = "Joystick Press";
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
new file mode 100644
index 0000000000000..8dc04e9031a6c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
@@ -0,0 +1,799 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Hong Xu <hong.xu@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9N12 SoC";
+	compatible = "atmel,at91sam9n12";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x8000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "atmel,at91sam9n12-matrix", "syscon";
+				reg = <0xffffde00 0x100>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x600>,
+				      <0xffffe600 0x200>;
+			};
+
+			ramc0: ramc@ffffe800 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9n12-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			};
+
+			reset-controller@fffffe00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			poweroff@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			mmc0: mmc@f0008000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0008000 0x600>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9n12-hlcdc";
+				reg = <0xf8038000 0x2000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk", "sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			dma: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe07983 0x00000000  /* pioA */
+				       0x00040000 0x00047e0f 0x00000000  /* pioB */
+				       0xfdffffff 0x07c00000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA0 periph A */
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA7 periph A */
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC23 periph B with pullup */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC22 periph B */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC25 periph B */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* PC9 periph C with pullup */
+							 AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC8 periph C */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE
+							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
+							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA13 periph B with pullup */
+							 AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA14 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
+				       <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			usart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8010000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8010000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8014000 0x100>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(16)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				status = "disabled";
+			};
+
+			spi0: spi@f0000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0000000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(4)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				status = "disabled";
+			};
+
+			usb1: gadget@f803c000 {
+				compatible = "atmel,at91sam9260-udc";
+				reg = <0xf803c000 0x4000>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+		};
+
+		usb0: ohci@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x00100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9x5-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
new file mode 100644
index 0000000000000..4c644d4c6be72
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Hong Xu <hong.xu@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9n12.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9N12-EK";
+	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "root=/dev/mtdblock1 rw rootfstype=jffs2";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <16000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0010000 {
+				status = "okay";
+			};
+
+			tcb0: timer@f8008000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			i2c0: i2c@f8010000 {
+				status = "okay";
+
+				wm8904: codec@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+					clock-names = "mclk";
+				};
+
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioA>;
+					interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+				};
+			};
+
+			mmc0: mmc@f0008000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PA7 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				qt1070 {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+
+				sound {
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usb1 {
+					pinctrl_usb1_vbus_sense: usb1_vbus_sense {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PB16 gpio usb vbus sense, no pull up and deglitch */
+					};
+				};
+			};
+
+			spi0: spi@f0000000 {
+				status = "okay";
+				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+			};
+
+			usb1: gadget@f803c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usb1_vbus_sense>;
+				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+
+			rtc@fffffeb0 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-ecc-strength = <2>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <1>;
+			atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
+			status = "okay";
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d8 {
+			label = "d8";
+			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		d9 {
+			label = "d9";
+			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		d10 {
+			label = "d10";
+			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-enter {
+			label = "Enter";
+			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "qiaodian,qd43003c0-40";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "okay";
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ AT91SAM9N12";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
new file mode 100644
index 0000000000000..3d089ffbe1626
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
@@ -0,0 +1,861 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
+ *
+ *  Copyright (C) 2014 Microchip
+ *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9RL family SoC";
+	compatible = "atmel,at91sam9rl", "atmel,at91sam9";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fb0: fb@500000 {
+			compatible = "atmel,at91sam9rl-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "hclk", "lcdc_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9rl-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>, <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			mmc0: mmc@fffa4000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa4000 0x600>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffa8000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffa8000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffbc000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffbc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffc0000 {
+				compatible = "atmel,at91sam9rl-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc4000 {
+				compatible = "atmel,at91sam9rl-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@fffc8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffc8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				clock-names = "pwm_clk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffd0000 {
+				compatible = "atmel,at91sam9rl-adc";
+				reg = <0xfffd0000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0x3f>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+			};
+
+			usb0: gadget@fffd4000 {
+				compatible = "atmel,at91sam9rl-udc";
+				reg = <0x00600000 0x100000>,
+				      <0xfffd4000 0x4000>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			dma0: dma-controller@ffffe600 {
+				compatible = "atmel,at91sam9rl-dma";
+				reg = <0xffffe600 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "dma_clk";
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9rl-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask =
+					/*    A         B     */
+					<0xffffffff 0xe05c6738>,  /* pioA */
+					<0xffffffff 0x0000c780>,  /* pioB */
+					<0xffffffff 0xe3ffff0e>,  /* pioC */
+					<0x003fffff 0x0001ff3c>;  /* pioD */
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_ts: adc0_ts-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad0: adc0_ad0-0 {
+						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad1: adc0_ad1-0 {
+						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad2: adc0_ad2-0 {
+						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad3: adc0_ad3-0 {
+						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad4: adc0_ad4-0 {
+						atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad5: adc0_ad5-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_adtrg: adc0_adtrg-0 {
+						atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_addr_nand: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				i2c_gpio1 {
+					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_oe_we: nand-oe-we-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 {
+						atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9rl-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			poweroff@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x10>;
+				status = "disabled";
+			};
+
+			rtc@fffffe00 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffe00 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio1>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9rlek.dts b/arch/arm/boot/dts/microchip/at91sam9rlek.dts
new file mode 100644
index 0000000000000..a57351270551a
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9rlek.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
+ *
+ *  Copyright (C) 2014 Microchip
+ *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ */
+/dts-v1/;
+#include "at91sam9rl.dtsi"
+
+/ {
+	model = "Atmel at91sam9rlek";
+	compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		fb0: fb@500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: panel {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_addr_nand>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_oe_we
+					     &pinctrl_nand_cs
+					     &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			mmc0: mmc@fffa4000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 = <
+					&pinctrl_usart0
+					&pinctrl_usart0_rts
+					&pinctrl_usart0_cts>;
+				status = "okay";
+			};
+
+			adc0: adc@fffd0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_adtrg>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
+			usb0: gadget@fffd4000 {
+				atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffcc000 {
+				status = "okay";
+				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			pwm0: pwm@fffc8000 {
+				status = "okay";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm1_2>,
+					<&pinctrl_pwm0_pwm2_2>;
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
+			rtc@fffffe00 {
+				status = "okay";
+			};
+		};
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "ds1";
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			label = "ds2";
+			pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+	};
+
+	led-controller-2 {
+		compatible = "gpio-leds";
+
+		led-3 {
+			label = "ds3";
+			gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-right-click {
+			label = "right_click";
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+
+		button-left-click {
+			label = "left_click";
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+	i2c-gpio-1 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x25.dtsi b/arch/arm/boot/dts/microchip/at91sam9x25.dtsi
new file mode 100644
index 0000000000000..7036f5f045715
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x25.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_macb1.dtsi"
+#include "at91sam9x5_can.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X25 SoC";
+	compatible = "atmel,at91sam9x25", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000001c  /* pioA */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
+				       0x80000000 0xfffd0000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x25ek.dts b/arch/arm/boot/dts/microchip/at91sam9x25ek.dts
new file mode 100644
index 0000000000000..ad7c6b36f0bac
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x25ek.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9x25.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X25-EK";
+	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x35.dtsi b/arch/arm/boot/dts/microchip/at91sam9x35.dtsi
new file mode 100644
index 0000000000000..eb03b0497e371
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x35.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_can.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35 SoC";
+	compatible = "atmel,at91sam9x35", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x35ek.dts b/arch/arm/boot/dts/microchip/at91sam9x35ek.dts
new file mode 100644
index 0000000000000..66675c787b97d
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x35ek.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9x35.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35-EK";
+	compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&bl_reg {
+	status = "okay";
+};
+
+&hlcdc {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&panel_reg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
new file mode 100644
index 0000000000000..a1fed912f2eea
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
@@ -0,0 +1,978 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
+ *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
+ *                   AT91SAM9X25, AT91SAM9X35 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9x5 family SoC";
+	compatible = "atmel,at91sam9x5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		ssc0 = &ssc0;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x8000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "atmel,at91sam9x5-matrix", "syscon";
+				reg = <0xffffde00 0x100>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x600>,
+				      <0xffffe600 0x200>;
+			};
+
+			ramc0: ramc@ffffe800 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9x5-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset_controller: reset-controller@fffffe00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: poweroff@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			dma0: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			dma1: dma-controller@ffffee00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffee00 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_data_8_15: ebi-data-msb-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_addr_nand: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
+					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC27 periph C */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C */
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC29 periph C */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC8 periph C */
+							 AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC9 periph C with pullup */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC16 periph C */
+							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC17 periph C with pullup */
+					};
+				};
+
+				nand {
+					pinctrl_nand_oe_we: nand-oe-we-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA13 periph B */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA11 periph B with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA2 periph B with pullup */
+							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA3 periph B with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA4 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A I2C0 data */
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A I2C0 clock */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC0 periph C I2C1 data */
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC1 periph C I2C1 clock */
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B I2C2 data */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B I2C2 clock */
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA30 gpio multidrive I2C0 data */
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA31 gpio multidrive I2C0 clock */
+					};
+				};
+
+				i2c_gpio1 {
+					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PC0 gpio multidrive I2C1 data */
+							 AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PC1 gpio multidrive I2C1 clock */
+					};
+				};
+
+				i2c_gpio2 {
+					pinctrl_i2c_gpio2: i2c_gpio2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PB4 gpio multidrive I2C2 data */
+							 AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PB5 gpio multidrive I2C2 clock */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins =
+							<AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins =
+							<AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins =
+							<AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <19>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+			};
+
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			mmc0: mmc@f0008000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0008000 0x600>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			mmc1: mmc@f000c000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf000c000 0x600>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8010000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8010000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8014000 0x100>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@f8018000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8018000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			uart0: serial@f8040000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8040000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8044000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8044000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			adc0: adc@f804c000 {
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xffff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-sample-hold-time = <11>;
+			};
+
+			spi0: spi@f0000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0000000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			usb2: gadget@f803c000 {
+				compatible = "atmel,at91sam9g45-udc";
+				reg = <0x00500000 0x80000
+				       0xf803c000 0x400>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			watchdog: watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			rtc: rtc@fffffeb0 {
+				compatible = "atmel,at91sam9x5-rtc";
+				reg = <0xfffffeb0 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		usb0: ohci@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb1: ehci@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9x5-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
+			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio1>;
+		status = "disabled";
+	};
+
+	i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
+			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5_can.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_can.dtsi
new file mode 100644
index 0000000000000..04ccb25d342c5
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_can.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			can0: can@f8000000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8000000 0x300>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8004000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8004000 0x300>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0, conflicts with DRXD */
+							AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX0, conflicts with DTXD */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1, conflicts with RXD1 */
+							AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX1, conflicts with TXD1 */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_isi.dtsi
new file mode 100644
index 0000000000000..4ce98f05d7db4
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_isi.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * Image Sensor Interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D0, conflicts with LCDDAT0 */
+							AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D1, conflicts with LCDDAT1 */
+							AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D2, conflicts with LCDDAT2 */
+							AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D3, conflicts with LCDDAT3 */
+							AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D4, conflicts with LCDDAT4 */
+							AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D5, conflicts with LCDDAT5 */
+							AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D6, conflicts with LCDDAT6 */
+							AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D7, conflicts with LCDDAT7 */
+							AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_PCK, conflicts with LCDDAT12 */
+							AT91_PIOC 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_HSYNC, conflicts with LCDDAT14 */
+							AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_VSYNC, conflicts with LCDDAT13 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D8, conflicts with LCDDAT8 */
+							AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_D9, conflicts with LCDDAT9 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D10, conflicts with LCDDAT10 */
+							AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_D11, conflicts with LCDDAT11 */
+					};
+				};
+			};
+
+			isi: isi@f8048000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf8048000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_lcd.dtsi
new file mode 100644
index 0000000000000..f81c9d1691e03
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_lcd.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * LCD controller.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9x5-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	lcd {
+		pinctrl_lcd_base: lcd-base-0 {
+			atmel,pins =
+				<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+				 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+				 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+				 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+				 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+		};
+
+		pinctrl_lcd_pwm: lcd-pwm-0 {
+			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+		};
+
+		pinctrl_lcd_rgb444: lcd-rgb-0 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+		};
+
+		pinctrl_lcd_rgb565: lcd-rgb-1 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+		};
+
+		pinctrl_lcd_rgb666: lcd-rgb-2 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+				 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+				 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+		};
+
+		pinctrl_lcd_rgb888: lcd-rgb-3 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+				 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+				 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+				 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+				 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+				 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+				 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+				 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+				 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_macb0.dtsi
new file mode 100644
index 0000000000000..222aa30f68603
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_macb0.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+					};
+
+					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
+					};
+				};
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_macb1.dtsi
new file mode 100644
index 0000000000000..26bf9b5de9ee4
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_macb1.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
+ * Ethernet interfaces.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC16 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC18 periph B */
+							 AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC19 periph B */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
+							 AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC28 periph B */
+							 AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC29 periph B */
+							 AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC30 periph B */
+							 AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC31 periph B */
+					};
+				};
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf8030000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_usart3.dtsi
new file mode 100644
index 0000000000000..a47c765e1b20a
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_usart3.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 4 USART.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	aliases {
+		serial4 = &usart3;
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC25 periph B */
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC26 periph B */
+					};
+				};
+			};
+
+			usart3: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
new file mode 100644
index 0000000000000..cdd37f67280bf
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+/ {
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@f8008000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				1wire_cm {
+					pinctrl_1wire_cm: 1wire_cm-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
+					};
+				};
+			};
+
+			rtc@fffffeb0 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_addr_nand
+				     &pinctrl_ebi_data_0_7>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_oe_we
+					     &pinctrl_nand_cs
+					     &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <2>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						uboot@40000 {
+							label = "u-boot";
+							reg = <0x40000 0xc0000>;
+						};
+
+						ubootenvred@100000 {
+							label = "U-Boot Env Redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						ubootenv@140000 {
+							label = "U-Boot Env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pb18 {
+			label = "pb18";
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pd21 {
+			label = "pd21";
+			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	1wire_cm {
+		compatible = "w1-gpio";
+		gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
+		linux,open-drain;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_1wire_cm>;
+		status = "okay";
+	};
+
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5dm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5dm.dtsi
new file mode 100644
index 0000000000000..a9278038af3bc
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5dm.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Free Electrons
+ *
+ *  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "disabled";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "disabled";
+	};
+
+	panel: panel {
+		compatible = "foxlink,fl500wvr00-a0t";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "disabled";
+	};
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&i2c0 {
+	keyboard@1b {
+		compatible = "qt1070";
+		reg = <0x1b>;
+		interrupt-parent = <&pioA>;
+		interrupts = <7 0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qt1070_irq>;
+		wakeup-source;
+	};
+};
+
+&hlcdc {
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+		port@0 {
+			hlcdc_panel_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_qt1070_irq: qt1070_irq {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi
new file mode 100644
index 0000000000000..5f4eaa618ab47
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+#include "at91sam9x5cm.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X5-EK";
+	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	sound {
+		compatible = "atmel,sam9x5-wm8731-audio";
+
+		atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+		atmel,audio-routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"LLINEIN", "Line In Jack",
+			"RLINEIN", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	wm8731: wm8731@1a {
+		compatible = "wm8731";
+		reg = <0x1a>;
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc0
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc1
+		&pinctrl_mmc1_slot0_clk_cmd_dat0
+		&pinctrl_mmc1_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	camera_sensor {
+		pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
+			atmel,pins =
+				<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
+		};
+
+		pinctrl_sensor_power: sensor_power-0 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_sensor_reset: sensor_reset-0 {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	mmc0 {
+		pinctrl_board_mmc0: mmc0-board {
+			atmel,pins =
+				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+		};
+	};
+
+	mmc1 {
+		pinctrl_board_mmc1: mmc1-board {
+			atmel,pins =
+				<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
+		};
+	};
+
+	usb2 {
+		pinctrl_board_usb2: usb2-board {
+			atmel,pins =
+				<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
+		};
+	};
+};
+
+&spi0 {
+	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+	status = "disabled"; /* conflicts with mmc1 */
+
+	flash@0 {
+		compatible = "atmel,at25df321a";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&ssc0 {
+	status = "okay";
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+			   &pioD 19 GPIO_ACTIVE_LOW
+			   &pioD 20 GPIO_ACTIVE_LOW
+			  >;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_usb2>;
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9xe.dtsi b/arch/arm/boot/dts/microchip/at91sam9xe.dtsi
new file mode 100644
index 0000000000000..f571f77779c36
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9xe.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com>
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9XE family SoC";
+	compatible = "atmel,at91sam9xe", "atmel,at91sam9260";
+
+	sram0: sram@2ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x4000>;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/ethernut5.dts b/arch/arm/boot/dts/microchip/ethernut5.dts
new file mode 100644
index 0000000000000..ad7a0850252a1
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/ethernut5.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ethernut5.dts - Device Tree file for Ethernut 5 board
+ *
+ * Copyright (C) 2012 egnite GmbH <info@egnite.de>
+ */
+/dts-v1/;
+#include "at91sam9xe.dtsi"
+
+/ {
+	model = "Ethernut 5";
+	compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs>;
+				pinctrl-names = "default";
+
+				nand: nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						root@0 {
+							label = "root";
+							reg = <0x0 0x08000000>;
+						};
+
+						data@20000 {
+							label = "data";
+							reg = <0x08000000 0x38000000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		pcf8563@50 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/evk-pro3.dts b/arch/arm/boot/dts/microchip/evk-pro3.dts
new file mode 100644
index 0000000000000..6d519d02d190e
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/evk-pro3.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "ge863-pro3.dtsi"
+
+/ {
+	model = "Telit EVK-PRO3 for Telit GE863-PRO3";
+	compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9";
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+	};
+
+	ahb {
+		apb {
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+};
diff --git a/arch/arm/boot/dts/microchip/ge863-pro3.dtsi b/arch/arm/boot/dts/microchip/ge863-pro3.dtsi
new file mode 100644
index 0000000000000..dbba33e5a06ce
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/ge863-pro3.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	clocks {
+		main_xtal {
+			clock-frequency = <6000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						boot@0 {
+							label = "boot";
+							reg = <0x0 0x7c0000>;
+						};
+
+						root@7c0000 {
+							label = "root";
+							reg = <0x7c0000 0x7840000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
new file mode 100644
index 0000000000000..0f555eb45bda3
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+	model = "Kontron KSwitch D10 MMT 6G-2GS";
+	compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921",
+		     "microchip,lan9668", "microchip,lan966";
+
+	aliases {
+		i2c0 = &i2c4;
+		i2c1 = &i2c1;
+	};
+
+	sfp0: sfp0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c4>;
+		los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2500>;
+		tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>;
+		rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2500>;
+		tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>;
+		rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-0 = <&fc1_c_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c4: i2c@600 {
+		pinctrl-0 = <&fc4_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&gpio {
+	fc1_c_pins: fc1-c-i2c-pins {
+		/* SCL, SDA */
+		pins = "GPIO_47", "GPIO_48";
+		function = "fc1_c";
+	};
+
+	fc4_b_pins: fc4-b-i2c-pins {
+		/* SCL, SDA */
+		pins = "GPIO_57", "GPIO_58";
+		function = "fc4_b";
+	};
+};
+
+&port2 {
+	phys = <&serdes 2 SERDES6G(0)>;
+	sfp = <&sfp0>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&port3 {
+	phys = <&serdes 3 SERDES6G(1)>;
+	sfp = <&sfp1>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts
new file mode 100644
index 0000000000000..ad5d8b56e6fa9
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 8G
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+	model = "Kontron KSwitch D10 MMT 8G";
+	compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921",
+		     "microchip,lan9668", "microchip,lan966";
+};
+
+&mdio0 {
+	phy2: ethernet-phy@3 {
+		reg = <3>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	phy3: ethernet-phy@4 {
+		reg = <4>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&port2 {
+	phys = <&serdes 2 SERDES6G(0)>;
+	phy-handle = <&phy2>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&port3 {
+	phys = <&serdes 3 SERDES6G(1)>;
+	phy-handle = <&phy3>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi
new file mode 100644
index 0000000000000..426893750d51f
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common part of the device tree for the Kontron KSwitch D10 MMT
+ */
+
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	aliases {
+		serial0 = &usart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		pinctrl-0 = <&reset_pins>;
+		pinctrl-names = "default";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart0: serial@200 {
+		pinctrl-0 = <&usart0_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi3: spi@400 {
+		pinctrl-0 = <&fc3_b_pins>, <&spi3_cs_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+		cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&phy_int_pins>;
+	pinctrl-names = "default";
+
+	fc3_b_pins: fc3-b-pins {
+		/* SCK, MISO, MOSI */
+		pins = "GPIO_51", "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	miim_c_pins: miim-c-pins {
+		/* MDC, MDIO */
+		pins = "GPIO_59", "GPIO_60";
+		function = "miim_c";
+	};
+
+	phy_int_pins: phy-int-pins {
+		/* PHY_INT# */
+		pins = "GPIO_24";
+		function = "gpio";
+	};
+
+	reset_pins: reset-pins {
+		/* SYS_RST# */
+		pins = "GPIO_56";
+		function = "gpio";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1 */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34";
+		function = "sgpio_a";
+	};
+
+	sgpio_b_pins: sgpio-b-pins {
+		/* LD */
+		pins = "GPIO_64";
+		function = "sgpio_b";
+	};
+
+	spi3_cs_pins: spi3-cs-pins {
+		/* CS# */
+		pins = "GPIO_46";
+		function = "gpio";
+	};
+
+	usart0_pins: usart0-pins {
+		/* RXD, TXD */
+		pins = "GPIO_25", "GPIO_26";
+		function = "fc0_b";
+	};
+
+	usbs_a_pins: usbs-a-pins {
+		/* VBUS_DET */
+		pins = "GPIO_66";
+		function = "gpio";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_c_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+	clock-frequency = <2500000>;
+	status = "okay";
+
+	phy4: ethernet-phy@5 {
+		reg = <5>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy5: ethernet-phy@6 {
+		reg = <6>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy6: ethernet-phy@7 {
+		reg = <7>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy7: ethernet-phy@8 {
+		reg = <8>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phys = <&serdes 0 CU(0)>;
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	status = "okay";
+};
+
+&port1 {
+	phys = <&serdes 1 CU(1)>;
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	status = "okay";
+};
+
+&port4 {
+	phys = <&serdes 4 SERDES6G(2)>;
+	phy-handle = <&phy4>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port5 {
+	phys = <&serdes 5 SERDES6G(2)>;
+	phy-handle = <&phy5>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port6 {
+	phys = <&serdes 6 SERDES6G(2)>;
+	phy-handle = <&phy6>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port7 {
+	phys = <&serdes 7 SERDES6G(2)>;
+	phy-handle = <&phy7>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>;
+	pinctrl-names = "default";
+	bus-frequency = <8000000>;
+	/* arbitrary range because all GPIOs are in software mode */
+	microchip,sgpio-port-ranges = <0 11>;
+	status = "okay";
+
+	sgpio_in: gpio@0 {
+		ngpios = <128>;
+	};
+
+	sgpio_out: gpio@1 {
+		ngpios = <128>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&usbs_a_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts
new file mode 100644
index 0000000000000..8804e8ba53705
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Horatiu Vultur <horatiu.vultur@microchip.com>
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB LAN9668";
+	compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966";
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	miim_a_pins: mdio-pins {
+		/* MDC, MDIO */
+		pins =  "GPIO_28", "GPIO_29";
+		function = "miim_a";
+	};
+
+	pps_out_pins: pps-out-pins {
+		/* 1pps output */
+		pins = "GPIO_38";
+		function = "ptpsync_3";
+	};
+
+	ptp_ext_pins: ptp-ext-pins {
+		/* 1pps input */
+		pins = "GPIO_35";
+		function = "ptpsync_0";
+	};
+
+	udc_pins: ucd-pins {
+		/* VBUS_DET B */
+		pins = "GPIO_8";
+		function = "usb_slave_b";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ext_phy0: ethernet-phy@7 {
+		reg = <7>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy1: ethernet-phy@8 {
+		reg = <8>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy2: ethernet-phy@9 {
+		reg = <9>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy3: ethernet-phy@10 {
+		reg = <10>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy4: ethernet-phy@15 {
+		reg = <15>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy5: ethernet-phy@16 {
+		reg = <16>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy6: ethernet-phy@17 {
+		reg = <17>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy7: ethernet-phy@18 {
+		reg = <18>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&port0 {
+	reg = <2>;
+	phy-handle = <&ext_phy2>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 0 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port1 {
+	reg = <3>;
+	phy-handle = <&ext_phy3>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 1 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port2 {
+	reg = <0>;
+	phy-handle = <&ext_phy0>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 2 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port3 {
+	reg = <1>;
+	phy-handle = <&ext_phy1>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port4 {
+	reg = <6>;
+	phy-handle = <&ext_phy6>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 4 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port5 {
+	reg = <7>;
+	phy-handle = <&ext_phy7>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 5 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port6 {
+	reg = <4>;
+	phy-handle = <&ext_phy4>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 6 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port7 {
+	reg = <5>;
+	phy-handle = <&ext_phy5>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 7 SERDES6G(2)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&switch {
+	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&udc_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts
new file mode 100644
index 0000000000000..3a3d76af86122
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8291.dts - Device Tree file for PCB8291
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8291", "microchip,lan9662", "microchip,lan966";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &usart3;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-blue {
+			label = "s0:blue";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-blue {
+			label = "s1:blue";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* RX, TX */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	can0_b_pins:  can0-b-pins {
+		/* RX, TX */
+		pins = "GPIO_35", "GPIO_36";
+		function = "can0_b";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_b_pins>;
+	pinctrl-names = "default";
+	status = "disabled"; /* Conflict with switch */
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	phys = <&serdes 0 CU(0)>;
+	status = "okay";
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	phys = <&serdes 1 CU(1)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-pcb8309.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8309.dts
new file mode 100644
index 0000000000000..0cb505f79ba1a
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8309.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8309.dts - Device Tree file for PCB8309
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8309", "microchip,lan9662", "microchip,lan966";
+
+	aliases {
+		serial0 = &usart3;
+		i2c102 = &i2c102;
+		i2c103 = &i2c103;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-controls = <&mux>;
+		i2c-parent = <&i2c4>;
+
+		i2c102: i2c-sfp@1 {
+			reg = <1>;
+		};
+
+		i2c103: i2c-sfp@2 {
+			reg = <2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-red {
+			label = "s0:red";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-red {
+			label = "s1:red";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&sgpio_out 11 0 GPIO_ACTIVE_HIGH>, /* p11b0 */
+			    <&sgpio_out 11 1 GPIO_ACTIVE_HIGH>; /* p11b1 */
+	};
+
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c102>;
+		tx-disable-gpios = <&sgpio_out 10 0 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in  2 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in  2 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in  1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp3: sfp3 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c103>;
+		tx-disable-gpios = <&sgpio_out 10 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in  3 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in  3 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in  1 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c4: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&nic_clk>;
+		pinctrl-0 = <&fc4_b_pins>;
+		pinctrl-names = "default";
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		i2c-sda-hold-time-ns = <1500>;
+		status = "okay";
+	};
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* RXD, TXD */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	fc4_b_pins: fc4-b-pins {
+		/* SCL, SDA */
+		pins = "GPIO_57", "GPIO_58";
+		function = "fc4_b";
+	};
+
+	pps_out_pins: pps-out-pins {
+		/* 1pps output */
+		pins = "GPIO_38";
+		function = "ptpsync_3";
+	};
+
+	ptp_ext_pins: ptp-ext-pins {
+		/* 1pps input */
+		pins = "GPIO_39";
+		function = "ptpsync_4";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	phys = <&serdes 0 CU(0)>;
+	status = "okay";
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	phys = <&serdes 1 CU(1)>;
+	status = "okay";
+};
+
+&port2 {
+	sfp = <&sfp2>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phys = <&serdes 2 SERDES6G(0)>;
+	status = "okay";
+};
+
+&port3 {
+	sfp = <&sfp3>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&switch {
+	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x.dtsi b/arch/arm/boot/dts/microchip/lan966x.dtsi
new file mode 100644
index 0000000000000..05b73f7cf0c77
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x.dtsi
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x.dtsi - Device Tree Include file for Microchip LAN966 family SoC
+ *
+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ * Author: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/microchip,lan966x.h>
+
+/ {
+	model = "Microchip LAN966 family SoC";
+	compatible = "microchip,lan966";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			clock-frequency = <600000000>;
+			reg = <0x0>;
+		};
+	};
+
+	clocks {
+		sys_clk: sys_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <165625000>;
+		};
+
+		cpu_clk: cpu_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <600000000>;
+		};
+
+		ddr_clk: ddr_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <300000000>;
+		};
+
+		nic_clk: nic_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	clks: clock-controller@e00c00a8 {
+		compatible = "microchip,lan966x-gck";
+		#clock-cells = <1>;
+		clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+		clock-names = "cpu", "ddr", "sys";
+		reg = <0xe00c00a8 0x38>, <0xe00c02cc 0x4>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <37500000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		udc: usb@200000 {
+			compatible = "microchip,lan9662-udc",
+				     "atmel,sama5d3-udc";
+			reg = <0x00200000 0x80000>,
+			      <0xe0808000 0x400>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		switch: switch@e0000000 {
+			compatible = "microchip,lan966x-switch";
+			reg = <0xe0000000 0x0100000>,
+			      <0xe2000000 0x0800000>;
+			reg-names = "cpu", "gcb";
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "xtr", "fdma", "ana", "ptp",
+					  "ptp-ext";
+			resets = <&reset 0>;
+			reset-names = "switch";
+			status = "disabled";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+
+				port5: port@5 {
+					reg = <5>;
+					status = "disabled";
+				};
+
+				port6: port@6 {
+					reg = <6>;
+					status = "disabled";
+				};
+
+				port7: port@7 {
+					reg = <7>;
+					status = "disabled";
+				};
+			};
+		};
+
+		otp: otp@e0021000 {
+			compatible = "microchip,lan9668-otpc", "microchip,lan9662-otpc";
+			reg = <0xe0021000 0x300>;
+		};
+
+		flx0: flexcom@e0040000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0040000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0040000 0x800>;
+			status = "disabled";
+
+			usart0: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi0: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e0044000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0044000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0044000 0x800>;
+			status = "disabled";
+
+			usart1: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi1: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		trng: rng@e0048000 {
+			compatible = "atmel,at91sam9g45-trng";
+			reg = <0xe0048000 0x100>;
+			clocks = <&nic_clk>;
+		};
+
+		aes: crypto@e004c000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe004c000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(13)>;
+			dma-names = "tx", "rx";
+			clocks = <&nic_clk>;
+			clock-names = "aes_clk";
+		};
+
+		flx2: flexcom@e0060000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0060000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0060000 0x800>;
+			status = "disabled";
+
+			usart2: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi2: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e0064000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0064000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0064000 0x800>;
+			status = "disabled";
+
+			usart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi3: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dma0: dma-controller@e0068000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe0068000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&nic_clk>;
+			clock-names = "dma_clk";
+		};
+
+		sha: crypto@e006c000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe006c000 0xec>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>;
+			dma-names = "tx";
+			clocks = <&nic_clk>;
+			clock-names = "sha_clk";
+		};
+
+		flx4: flexcom@e0070000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0070000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0070000 0x800>;
+			status = "disabled";
+
+			usart4: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		timer0: timer@e008c000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xe008c000 0x400>;
+			clocks = <&nic_clk>;
+			clock-names = "timer";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@e0090000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xe0090000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&nic_clk>;
+			status = "disabled";
+		};
+
+		cpu_ctrl: syscon@e00c0000 {
+			compatible = "microchip,lan966x-cpu-syscon", "syscon";
+			reg = <0xe00c0000 0x350>;
+		};
+
+		can0: can@e081c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN0>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e0820000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0820000 0xfc>, <0x00100000 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN1>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		reset: reset-controller@e200400c {
+			compatible = "microchip,lan966x-switch-reset";
+			reg = <0xe200400c 0x4>;
+			reg-names = "gcb";
+			#reset-cells = <1>;
+			cpu-syscon = <&cpu_ctrl>;
+		};
+
+		gpio: pinctrl@e2004064 {
+			compatible = "microchip,lan966x-pinctrl";
+			reg = <0xe2004064 0xb4>,
+			    <0xe2010024 0x138>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 78>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+		};
+
+		mdio0: mdio@e2004118 {
+			compatible = "microchip,lan966x-miim";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe2004118 0x24>;
+			clocks = <&sys_clk>;
+			status = "disabled";
+		};
+
+		mdio1: mdio@e200413c {
+			compatible = "microchip,lan966x-miim";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe200413c 0x24>,
+			      <0xe2010020 0x4>;
+			clocks = <&sys_clk>;
+			status = "disabled";
+
+			phy0: ethernet-phy@1 {
+				reg = <1>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			phy1: ethernet-phy@2 {
+				reg = <2>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		sgpio: gpio@e2004190 {
+			compatible = "microchip,sparx5-sgpio";
+			reg = <0xe2004190 0x118>;
+			clocks = <&sys_clk>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgpio_in: gpio@0 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+
+			sgpio_out: gpio@1 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <3>;
+			};
+		};
+
+		hwmon: hwmon@e2010180 {
+			compatible = "microchip,lan9668-hwmon";
+			reg = <0xe2010180 0xc>,
+			      <0xe20042a8 0xc>;
+			reg-names = "pvt", "fan";
+			clocks = <&sys_clk>;
+		};
+
+		serdes: serdes@e202c000 {
+			compatible = "microchip,lan966x-serdes";
+			reg = <0xe202c000 0x9c>,
+			      <0xe2004010 0x4>;
+			#phy-cells = <2>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			reg = <0xe8c11000 0x1000>,
+			      <0xe8c12000 0x2000>,
+			      <0xe8c14000 0x2000>,
+			      <0xe8c16000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/mpa1600.dts b/arch/arm/boot/dts/microchip/mpa1600.dts
new file mode 100644
index 0000000000000..005c2758e229c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/mpa1600.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * mpa1600.dts - Device Tree file for Phontech MPA 1600
+ *
+ *  Copyright (C) 2013 Joachim Eastwood <manabian@gmail.com>
+ */
+/dts-v1/;
+#include "at91rm9200.dtsi"
+
+/ {
+	model = "Phontech MPA 1600";
+	compatible = "phontech,mpa1600", "atmel,at91rm9200";
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			ssc0: ssc@fffd0000 {
+				status = "okay";
+			};
+
+			ssc1: ssc@fffd4000 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@300000 {
+			num-ports = <1>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		monitor_mute {
+			label = "Monitor mute";
+			gpios = <&pioC 1 GPIO_ACTIVE_LOW>;
+			linux,code = <113>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/pm9g45.dts b/arch/arm/boot/dts/microchip/pm9g45.dts
new file mode 100644
index 0000000000000..c349fd3758a62
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/pm9g45.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pm9g45.dts - Device Tree file for Ronetix pm9g45 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g45.dtsi"
+
+/ {
+	model = "Ronetix pm9g45";
+	compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@70000000 {
+		reg = <0x70000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+		      clock-frequency = <32768>;
+		};
+
+		main_xtal {
+		      clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc {
+					pinctrl_board_mmc: mmc0-board {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD6 gpio CD pin pull_up and deglitch */
+					};
+				};
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 3 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x1A0000>;
+						};
+
+						kernel@200000 {
+							label = "bareboxenv2";
+							reg = <0x200000 0x300000>;
+						};
+
+						kernel@500000 {
+							label = "root";
+							reg = <0x500000 0x400000>;
+						};
+
+						data@900000 {
+							label = "data";
+							reg = <0x900000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@700000 {
+			status = "okay";
+			num-ports = <2>;
+		};
+
+		usb1: ehci@800000 {
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "led0";
+			gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		led1 {
+			label = "led1";
+			gpios = <&pioD 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		right {
+			label = "SW4";
+			gpios = <&pioE 7 GPIO_ACTIVE_LOW>;
+			linux,code = <106>;
+		};
+
+		up {
+			label = "SW3";
+			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+			linux,code = <103>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
new file mode 100644
index 0000000000000..73d570a172690
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -0,0 +1,1353 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Microchip SAM9X60 SoC";
+	compatible = "microchip,sam9x60";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x100000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: gadget@500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sam9x60-udc";
+			reg = <0x00500000 0x100000
+				0xf803c000 0x400>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		usb1: ohci@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "microchip,sam9x60-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			microchip,sfr = <&sfr>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "microchip,sam9x60-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		sdmmc0: sdio-host@80000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x80000000 0x300>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@90000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x90000000 0x300>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			flx4: flexcom@f0000000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0000000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0000000 0x800>;
+				status = "disabled";
+
+				uart4: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi4: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c4: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx5: flexcom@f0004000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0004000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0004000 0x800>;
+				status = "disabled";
+
+				uart5: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi5: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c5: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			dma0: dma-controller@f0008000 {
+				compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma";
+				reg = <0xf0008000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			ssc: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			qspi: spi@f0014000 {
+				compatible = "microchip,sam9x60-qspi";
+				reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>;
+				clock-names = "pclk", "qspick";
+				atmel,pmc = <&pmc>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2s: i2s@f001c000 {
+				compatible = "microchip,sam9x60-i2smcc";
+				reg = <0xf001c000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			flx11: flexcom@f0020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0020000 0x800>;
+				status = "disabled";
+
+				uart11: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(22))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(23))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c11: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(22))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(23))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx12: flexcom@f0024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0024000 0x800>;
+				status = "disabled";
+
+				uart12: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(24))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(25))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c12: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(24))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(25))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			pit64b: timer@f0028000 {
+				compatible = "microchip,sam9x60-pit64b";
+				reg = <0xf0028000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+				clock-names = "pclk", "gclk";
+			};
+
+			sha: crypto@f002c000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf002c000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "sha_clk";
+			};
+
+			trng: trng@f0030000 {
+				compatible = "microchip,sam9x60-trng";
+				reg = <0xf0030000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			};
+
+			aes: crypto@f0034000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf0034000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "aes_clk";
+			};
+
+			tdes: crypto@f0038000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf0038000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "tdes_clk";
+			};
+
+			classd: classd@f003c000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xf003c000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			can0: can@f8000000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8000000 0x300>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8004000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8004000 0x300>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			flx6: flexcom@f8010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8010000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8010000 0x800>;
+				status = "disabled";
+
+				uart6: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c6: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx7: flexcom@f8014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8014000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8014000 0x800>;
+				status = "disabled";
+
+				uart7: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c7: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx8: flexcom@f8018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8018000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8018000 0x800>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c8: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx0: flexcom@f801c000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf801c000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf801c000 0x800>;
+				status = "disabled";
+
+				uart0: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi0: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c0: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx1: flexcom@f8020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8020000 0x800>;
+				status = "disabled";
+
+				uart1: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi1: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c1: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx2: flexcom@f8024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8024000 0x800>;
+				status = "disabled";
+
+				uart2: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi2: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c2: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx3: flexcom@f8028000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8028000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8028000 0x800>;
+				status = "disabled";
+
+				uart3: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi3: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c3: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf802c000 0x1000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf8030000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "microchip,sam9x60-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "microchip,sam9x60-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 25>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			flx9: flexcom@f8040000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8040000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8040000 0x800>;
+				status = "disabled";
+
+				uart9: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c9: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx10: flexcom@f8044000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8044000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8044000 0x800>;
+				status = "disabled";
+
+				uart10: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(21))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c10: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(21))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			isi: isi@f8048000 {
+				compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi";
+				reg = <0xf8048000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			adc: adc@f804c000 {
+				compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				clock-names = "adc_clk";
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8050000 {
+				compatible = "microchip,sam9x60-sfr", "syscon";
+				reg = <0xf8050000 0x100>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon";
+				reg = <0xffffde00 0x200>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x300>,
+				      <0xffffe600 0x100>;
+			};
+
+			mpddrc: mpddrc@ffffe800 {
+				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x100>;
+			};
+
+			aic: interrupt-controller@fffff100 {
+				compatible = "microchip,sam9x60-aic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0xfffff100 0x100>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
+				atmel,mux-mask = <
+						 /*	A	B	C	*/
+						 0xffffffff 0xffe03fff 0xef00019d	/* pioA */
+						 0x03ffffff 0x02fc7e7f 0x00780000	/* pioB */
+						 0xffffffff 0xffffffff 0xf83fffff	/* pioC */
+						 0x003fffff 0x003f8000 0x00000000	/* pioD */
+						 >;
+
+				pioA: gpio@fffff400 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <26>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "microchip,sam9x60-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+				clock-names = "td_slck", "md_slck", "main_xtal";
+			};
+
+			reset_controller: reset-controller@fffffe00 {
+				compatible = "microchip,sam9x60-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k 0>;
+			};
+
+			shutdown_controller: poweroff@fffffe10 {
+				compatible = "microchip,sam9x60-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+				atmel,wakeup-rtt-timer;
+				status = "disabled";
+			};
+
+			rtt: rtc@fffffe20 {
+				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+				reg = <0xfffffe20 0x20>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+			};
+
+			pit: timer@fffffe40 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "microchip,sam9x60-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <1>;
+			};
+
+			gpbr: syscon@fffffe60 {
+				compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffe60 0x10>;
+			};
+
+			rtc: rtc@fffffea8 {
+				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
+				reg = <0xfffffea8 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+			};
+
+			watchdog: watchdog@ffffff80 {
+				compatible = "microchip,sam9x60-wdt";
+				reg = <0xffffff80 0x24>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d2-pinfunc.h b/arch/arm/boot/dts/microchip/sama5d2-pinfunc.h
new file mode 100644
index 0000000000000..28a2e45752fea
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d2-pinfunc.h
@@ -0,0 +1,881 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__QSPI0_SCK		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__D0			PINMUX_PIN(PIN_PA0, 6, 2)
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__QSPI0_CS		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__D1			PINMUX_PIN(PIN_PA1, 6, 2)
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_DAT0		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__QSPI0_IO0		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__D2			PINMUX_PIN(PIN_PA2, 6, 2)
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT1		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__QSPI0_IO1		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__D3			PINMUX_PIN(PIN_PA3, 6, 2)
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT2		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__QSPI0_IO2		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__D4			PINMUX_PIN(PIN_PA4, 6, 2)
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT3		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__QSPI0_IO3		PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__D5			PINMUX_PIN(PIN_PA5, 6, 2)
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT4		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__QSPI1_SCK		PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__TIOA5			PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA6, 5, 1)
+#define PIN_PA6__D6			PINMUX_PIN(PIN_PA6, 6, 2)
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT5		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__QSPI1_IO0		PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__TIOB5			PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA7, 5, 1)
+#define PIN_PA7__D7			PINMUX_PIN(PIN_PA7, 6, 2)
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT6		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__QSPI1_IO1		PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__TCLK5			PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA8, 5, 1)
+#define PIN_PA8__NWE_NANDWE		PINMUX_PIN(PIN_PA8, 6, 2)
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT7		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__QSPI1_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__TIOA4			PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__NCS3			PINMUX_PIN(PIN_PA9, 6, 2)
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_RSTN		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__QSPI1_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__TIOB4			PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__FLEXCOM2_IO4		PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__A21_NANDALE		PINMUX_PIN(PIN_PA10, 6, 2)
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_VDDSEL		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__QSPI1_CS		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__TCLK4			PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__A22_NANDCLE		PINMUX_PIN(PIN_PA11, 6, 2)
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP		PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__IRQ			PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__NRD_NANDOE		PINMUX_PIN(PIN_PA12, 6, 2)
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_CD		PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA13, 5, 1)
+#define PIN_PA13__D8			PINMUX_PIN(PIN_PA13, 6, 2)
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SPI0_SPCK		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__TK1			PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__QSPI0_SCK		PINMUX_PIN(PIN_PA14, 3, 2)
+#define PIN_PA14__I2SC1_MCK		PINMUX_PIN(PIN_PA14, 4, 2)
+#define PIN_PA14__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA14, 5, 1)
+#define PIN_PA14__D9			PINMUX_PIN(PIN_PA14, 6, 2)
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__SPI0_MOSI		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__TF1			PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__QSPI0_CS		PINMUX_PIN(PIN_PA15, 3, 2)
+#define PIN_PA15__I2SC1_CK		PINMUX_PIN(PIN_PA15, 4, 2)
+#define PIN_PA15__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA15__D10			PINMUX_PIN(PIN_PA15, 6, 2)
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__SPI0_MISO		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__TD1			PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__QSPI0_IO0		PINMUX_PIN(PIN_PA16, 3, 2)
+#define PIN_PA16__I2SC1_WS		PINMUX_PIN(PIN_PA16, 4, 2)
+#define PIN_PA16__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA16__D11			PINMUX_PIN(PIN_PA16, 6, 2)
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__SPI0_NPCS0		PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__RD1			PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__QSPI0_IO1		PINMUX_PIN(PIN_PA17, 3, 2)
+#define PIN_PA17__I2SC1_DI0		PINMUX_PIN(PIN_PA17, 4, 2)
+#define PIN_PA17__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA17__D12			PINMUX_PIN(PIN_PA17, 6, 2)
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__SPI0_NPCS1		PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__RK1			PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__QSPI0_IO2		PINMUX_PIN(PIN_PA18, 3, 2)
+#define PIN_PA18__I2SC1_DO0		PINMUX_PIN(PIN_PA18, 4, 2)
+#define PIN_PA18__SDMMC1_DAT0		PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA18__D13			PINMUX_PIN(PIN_PA18, 6, 2)
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__SPI0_NPCS2		PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__RF1			PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__QSPI0_IO3		PINMUX_PIN(PIN_PA19, 3, 2)
+#define PIN_PA19__TIOA0			PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__SDMMC1_DAT1		PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA19__D14			PINMUX_PIN(PIN_PA19, 6, 2)
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__SPI0_NPCS3		PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__TIOB0			PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__SDMMC1_DAT2		PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA20__D15			PINMUX_PIN(PIN_PA20, 6, 2)
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__IRQ			PINMUX_PIN(PIN_PA21, 1, 2)
+#define PIN_PA21__PCK2			PINMUX_PIN(PIN_PA21, 2, 3)
+#define PIN_PA21__TCLK0			PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__SDMMC1_DAT3		PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA21__NANDRDY		PINMUX_PIN(PIN_PA21, 6, 2)
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__FLEXCOM1_IO2		PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__D0			PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__TCK			PINMUX_PIN(PIN_PA22, 3, 4)
+#define PIN_PA22__SPI1_SPCK		PINMUX_PIN(PIN_PA22, 4, 2)
+#define PIN_PA22__SDMMC1_CK		PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA22__QSPI0_SCK		PINMUX_PIN(PIN_PA22, 6, 3)
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__D1			PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__TDI			PINMUX_PIN(PIN_PA23, 3, 4)
+#define PIN_PA23__SPI1_MOSI		PINMUX_PIN(PIN_PA23, 4, 2)
+#define PIN_PA23__QSPI0_CS		PINMUX_PIN(PIN_PA23, 6, 3)
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__D2			PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__TDO			PINMUX_PIN(PIN_PA24, 3, 4)
+#define PIN_PA24__SPI1_MISO		PINMUX_PIN(PIN_PA24, 4, 2)
+#define PIN_PA24__QSPI0_IO0		PINMUX_PIN(PIN_PA24, 6, 3)
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__FLEXCOM1_IO3		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__D3			PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__TMS			PINMUX_PIN(PIN_PA25, 3, 4)
+#define PIN_PA25__SPI1_NPCS0		PINMUX_PIN(PIN_PA25, 4, 2)
+#define PIN_PA25__QSPI0_IO1		PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__FLEXCOM1_IO4		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__D4			PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__NTRST			PINMUX_PIN(PIN_PA26, 3, 4)
+#define PIN_PA26__SPI1_NPCS1		PINMUX_PIN(PIN_PA26, 4, 2)
+#define PIN_PA26__QSPI0_IO2		PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__TIOA1			PINMUX_PIN(PIN_PA27, 1, 2)
+#define PIN_PA27__D5			PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__SPI0_NPCS2		PINMUX_PIN(PIN_PA27, 3, 2)
+#define PIN_PA27__SPI1_NPCS2		PINMUX_PIN(PIN_PA27, 4, 2)
+#define PIN_PA27__SDMMC1_RSTN		PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__QSPI0_IO3		PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__TIOB1			PINMUX_PIN(PIN_PA28, 1, 2)
+#define PIN_PA28__D6			PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__SPI0_NPCS3		PINMUX_PIN(PIN_PA28, 3, 2)
+#define PIN_PA28__SPI1_NPCS3		PINMUX_PIN(PIN_PA28, 4, 2)
+#define PIN_PA28__SDMMC1_CMD		PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__CLASSD_L0		PINMUX_PIN(PIN_PA28, 6, 1)
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__TCLK1			PINMUX_PIN(PIN_PA29, 1, 2)
+#define PIN_PA29__D7			PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__SPI0_NPCS1		PINMUX_PIN(PIN_PA29, 3, 2)
+#define PIN_PA29__SDMMC1_WP		PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__CLASSD_L1		PINMUX_PIN(PIN_PA29, 6, 1)
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__NWE_NANDWE		PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__SPI0_NPCS0		PINMUX_PIN(PIN_PA30, 3, 2)
+#define PIN_PA30__PWMH0			PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__SDMMC1_CD		PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__CLASSD_L2		PINMUX_PIN(PIN_PA30, 6, 1)
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__NCS3			PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__SPI0_MISO		PINMUX_PIN(PIN_PA31, 3, 2)
+#define PIN_PA31__PWML0			PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__CLASSD_L3		PINMUX_PIN(PIN_PA31, 6, 1)
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__A21_NANDALE		PINMUX_PIN(PIN_PB0, 2, 1)
+#define PIN_PB0__SPI0_MOSI		PINMUX_PIN(PIN_PB0, 3, 2)
+#define PIN_PB0__PWMH1			PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__A22_NANDCLE		PINMUX_PIN(PIN_PB1, 2, 1)
+#define PIN_PB1__SPI0_SPCK		PINMUX_PIN(PIN_PB1, 3, 2)
+#define PIN_PB1__PWML1			PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__CLASSD_R0		PINMUX_PIN(PIN_PB1, 6, 1)
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__NRD_NANDOE		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__PWMFI0			PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__CLASSD_R1		PINMUX_PIN(PIN_PB2, 6, 1)
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__URXD4			PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__D8			PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__IRQ			PINMUX_PIN(PIN_PB3, 3, 3)
+#define PIN_PB3__PWMEXTRG0		PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB3__CLASSD_R2		PINMUX_PIN(PIN_PB3, 6, 1)
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__UTXD4			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__D9			PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__FIQ			PINMUX_PIN(PIN_PB4, 3, 4)
+#define PIN_PB4__CLASSD_R3		PINMUX_PIN(PIN_PB4, 6, 1)
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TCLK2			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__D10			PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PWMH2			PINMUX_PIN(PIN_PB5, 3, 1)
+#define PIN_PB5__QSPI1_SCK		PINMUX_PIN(PIN_PB5, 4, 2)
+#define PIN_PB5__GTSUCOMP		PINMUX_PIN(PIN_PB5, 6, 3)
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__TIOA2			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__D11			PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PWML2			PINMUX_PIN(PIN_PB6, 3, 1)
+#define PIN_PB6__QSPI1_CS		PINMUX_PIN(PIN_PB6, 4, 2)
+#define PIN_PB6__GTXER			PINMUX_PIN(PIN_PB6, 6, 3)
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TIOB2			PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__D12			PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__PWMH3			PINMUX_PIN(PIN_PB7, 3, 1)
+#define PIN_PB7__QSPI1_IO0		PINMUX_PIN(PIN_PB7, 4, 2)
+#define PIN_PB7__GRXCK			PINMUX_PIN(PIN_PB7, 6, 3)
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__TCLK3			PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__D13			PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__PWML3			PINMUX_PIN(PIN_PB8, 3, 1)
+#define PIN_PB8__QSPI1_IO1		PINMUX_PIN(PIN_PB8, 4, 2)
+#define PIN_PB8__GCRS			PINMUX_PIN(PIN_PB8, 6, 3)
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__TIOA3			PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__D14			PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PWMFI1			PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__QSPI1_IO2		PINMUX_PIN(PIN_PB9, 4, 2)
+#define PIN_PB9__GCOL			PINMUX_PIN(PIN_PB9, 6, 3)
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__TIOB3			PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__D15			PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PWMEXTRG1		PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__QSPI1_IO3		PINMUX_PIN(PIN_PB10, 4, 2)
+#define PIN_PB10__GRX2			PINMUX_PIN(PIN_PB10, 6, 3)
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__LCDDAT0		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__A0_NBS0		PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__URXD3			PINMUX_PIN(PIN_PB11, 3, 3)
+#define PIN_PB11__PDMIC_DAT		PINMUX_PIN(PIN_PB11, 4, 2)
+#define PIN_PB11__GRX3			PINMUX_PIN(PIN_PB11, 6, 3)
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__LCDDAT1		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__A1			PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__UTXD3			PINMUX_PIN(PIN_PB12, 3, 3)
+#define PIN_PB12__PDMIC_CLK		PINMUX_PIN(PIN_PB12, 4, 2)
+#define PIN_PB12__GTX2			PINMUX_PIN(PIN_PB12, 6, 3)
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__LCDDAT2		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__A2			PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__PCK1			PINMUX_PIN(PIN_PB13, 3, 3)
+#define PIN_PB13__GTX3			PINMUX_PIN(PIN_PB13, 6, 3)
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__LCDDAT3		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__A3			PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__TK1			PINMUX_PIN(PIN_PB14, 3, 2)
+#define PIN_PB14__I2SC1_MCK		PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__QSPI1_SCK		PINMUX_PIN(PIN_PB14, 5, 3)
+#define PIN_PB14__GTXCK			PINMUX_PIN(PIN_PB14, 6, 3)
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__LCDDAT4		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__A4			PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__TF1			PINMUX_PIN(PIN_PB15, 3, 2)
+#define PIN_PB15__I2SC1_CK		PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__QSPI1_CS		PINMUX_PIN(PIN_PB15, 5, 3)
+#define PIN_PB15__GTXEN			PINMUX_PIN(PIN_PB15, 6, 3)
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__LCDDAT5		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__A5			PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__TD1			PINMUX_PIN(PIN_PB16, 3, 2)
+#define PIN_PB16__I2SC1_WS		PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__QSPI1_IO0		PINMUX_PIN(PIN_PB16, 5, 3)
+#define PIN_PB16__GRXDV			PINMUX_PIN(PIN_PB16, 6, 3)
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__LCDDAT6		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__A6			PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__RD1			PINMUX_PIN(PIN_PB17, 3, 2)
+#define PIN_PB17__I2SC1_DI0		PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__QSPI1_IO1		PINMUX_PIN(PIN_PB17, 5, 3)
+#define PIN_PB17__GRXER			PINMUX_PIN(PIN_PB17, 6, 3)
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__LCDDAT7		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__A7			PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__RK1			PINMUX_PIN(PIN_PB18, 3, 2)
+#define PIN_PB18__I2SC1_DO0		PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__QSPI1_IO2		PINMUX_PIN(PIN_PB18, 5, 3)
+#define PIN_PB18__GRX0			PINMUX_PIN(PIN_PB18, 6, 3)
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__LCDDAT8		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__A8			PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__RF1			PINMUX_PIN(PIN_PB19, 3, 2)
+#define PIN_PB19__TIOA3			PINMUX_PIN(PIN_PB19, 4, 2)
+#define PIN_PB19__QSPI1_IO3		PINMUX_PIN(PIN_PB19, 5, 3)
+#define PIN_PB19__GRX1			PINMUX_PIN(PIN_PB19, 6, 3)
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__LCDDAT9		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__A9			PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__TK0			PINMUX_PIN(PIN_PB20, 3, 1)
+#define PIN_PB20__TIOB3			PINMUX_PIN(PIN_PB20, 4, 2)
+#define PIN_PB20__PCK1			PINMUX_PIN(PIN_PB20, 5, 4)
+#define PIN_PB20__GTX0			PINMUX_PIN(PIN_PB20, 6, 3)
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__LCDDAT10		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__A10			PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__TF0			PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__TCLK3			PINMUX_PIN(PIN_PB21, 4, 2)
+#define PIN_PB21__FLEXCOM3_IO2		PINMUX_PIN(PIN_PB21, 5, 3)
+#define PIN_PB21__GTX1			PINMUX_PIN(PIN_PB21, 6, 3)
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__LCDDAT11		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__A11			PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__TD0			PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__TIOA2			PINMUX_PIN(PIN_PB22, 4, 2)
+#define PIN_PB22__FLEXCOM3_IO1		PINMUX_PIN(PIN_PB22, 5, 3)
+#define PIN_PB22__GMDC			PINMUX_PIN(PIN_PB22, 6, 3)
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__LCDDAT12		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__A12			PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__RD0			PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__TIOB2			PINMUX_PIN(PIN_PB23, 4, 2)
+#define PIN_PB23__FLEXCOM3_IO0		PINMUX_PIN(PIN_PB23, 5, 3)
+#define PIN_PB23__GMDIO			PINMUX_PIN(PIN_PB23, 6, 3)
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__LCDDAT13		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__A13			PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__RK0			PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__TCLK2			PINMUX_PIN(PIN_PB24, 4, 2)
+#define PIN_PB24__FLEXCOM3_IO3		PINMUX_PIN(PIN_PB24, 5, 3)
+#define PIN_PB24__ISC_D10		PINMUX_PIN(PIN_PB24, 6, 3)
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__LCDDAT14		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__A14			PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__RF0			PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__FLEXCOM3_IO4		PINMUX_PIN(PIN_PB25, 5, 3)
+#define PIN_PB25__ISC_D11		PINMUX_PIN(PIN_PB25, 6, 3)
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__LCDDAT15		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__A15			PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__URXD0			PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PDMIC_DAT		PINMUX_PIN(PIN_PB26, 4, 1)
+#define PIN_PB26__ISC_D0		PINMUX_PIN(PIN_PB26, 6, 3)
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__LCDDAT16		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__A16			PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__UTXD0			PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PDMIC_CLK		PINMUX_PIN(PIN_PB27, 4, 1)
+#define PIN_PB27__ISC_D1		PINMUX_PIN(PIN_PB27, 6, 3)
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__LCDDAT17		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__A17			PINMUX_PIN(PIN_PB28, 2, 1)
+#define PIN_PB28__FLEXCOM0_IO0		PINMUX_PIN(PIN_PB28, 3, 1)
+#define PIN_PB28__TIOA5			PINMUX_PIN(PIN_PB28, 4, 2)
+#define PIN_PB28__ISC_D2		PINMUX_PIN(PIN_PB28, 6, 3)
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__LCDDAT18		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__A18			PINMUX_PIN(PIN_PB29, 2, 1)
+#define PIN_PB29__FLEXCOM0_IO1		PINMUX_PIN(PIN_PB29, 3, 1)
+#define PIN_PB29__TIOB5			PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__ISC_D3		PINMUX_PIN(PIN_PB29, 7, 3)
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__LCDDAT19		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__A19			PINMUX_PIN(PIN_PB30, 2, 1)
+#define PIN_PB30__FLEXCOM0_IO2		PINMUX_PIN(PIN_PB30, 3, 1)
+#define PIN_PB30__TCLK5			PINMUX_PIN(PIN_PB30, 4, 2)
+#define PIN_PB30__ISC_D4		PINMUX_PIN(PIN_PB30, 6, 3)
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__LCDDAT20		PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__A20			PINMUX_PIN(PIN_PB31, 2, 1)
+#define PIN_PB31__FLEXCOM0_IO3		PINMUX_PIN(PIN_PB31, 3, 1)
+#define PIN_PB31__TWD0			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__ISC_D5		PINMUX_PIN(PIN_PB31, 6, 3)
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__LCDDAT21		PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__A23			PINMUX_PIN(PIN_PC0, 2, 1)
+#define PIN_PC0__FLEXCOM0_IO4		PINMUX_PIN(PIN_PC0, 3, 1)
+#define PIN_PC0__TWCK0			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__ISC_D6			PINMUX_PIN(PIN_PC0, 6, 3)
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__LCDDAT22		PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__A24			PINMUX_PIN(PIN_PC1, 2, 1)
+#define PIN_PC1__CANTX0			PINMUX_PIN(PIN_PC1, 3, 1)
+#define PIN_PC1__SPI1_SPCK		PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__I2SC0_CK		PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__ISC_D7			PINMUX_PIN(PIN_PC1, 6, 3)
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__LCDDAT23		PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__A25			PINMUX_PIN(PIN_PC2, 2, 1)
+#define PIN_PC2__CANRX0			PINMUX_PIN(PIN_PC2, 3, 1)
+#define PIN_PC2__SPI1_MOSI		PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__I2SC0_MCK		PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__ISC_D8			PINMUX_PIN(PIN_PC2, 6, 3)
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__LCDPWM			PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__NWAIT			PINMUX_PIN(PIN_PC3, 2, 1)
+#define PIN_PC3__TIOA1			PINMUX_PIN(PIN_PC3, 3, 1)
+#define PIN_PC3__SPI1_MISO		PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__I2SC0_WS		PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__ISC_D9			PINMUX_PIN(PIN_PC3, 6, 3)
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__LCDDISP		PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__NWR1_NBS1		PINMUX_PIN(PIN_PC4, 2, 1)
+#define PIN_PC4__TIOB1			PINMUX_PIN(PIN_PC4, 3, 1)
+#define PIN_PC4__SPI1_NPCS0		PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__I2SC0_DI0		PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__ISC_PCK		PINMUX_PIN(PIN_PC4, 6, 3)
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__LCDVSYNC		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__NCS0			PINMUX_PIN(PIN_PC5, 2, 1)
+#define PIN_PC5__TCLK1			PINMUX_PIN(PIN_PC5, 3, 1)
+#define PIN_PC5__SPI1_NPCS1		PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__I2SC0_DO0		PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__ISC_VSYNC		PINMUX_PIN(PIN_PC5, 6, 3)
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__LCDHSYNC		PINMUX_PIN(PIN_PC6, 1, 1)
+#define PIN_PC6__NCS1			PINMUX_PIN(PIN_PC6, 2, 1)
+#define PIN_PC6__TWD1			PINMUX_PIN(PIN_PC6, 3, 1)
+#define PIN_PC6__SPI1_NPCS2		PINMUX_PIN(PIN_PC6, 4, 1)
+#define PIN_PC6__ISC_HSYNC		PINMUX_PIN(PIN_PC6, 6, 3)
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__LCDPCK			PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__NCS2			PINMUX_PIN(PIN_PC7, 2, 1)
+#define PIN_PC7__TWCK1			PINMUX_PIN(PIN_PC7, 3, 1)
+#define PIN_PC7__SPI1_NPCS3		PINMUX_PIN(PIN_PC7, 4, 1)
+#define PIN_PC7__URXD1			PINMUX_PIN(PIN_PC7, 5, 2)
+#define PIN_PC7__ISC_MCK		PINMUX_PIN(PIN_PC7, 6, 3)
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__LCDDEN			PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__NANDRDY		PINMUX_PIN(PIN_PC8, 2, 1)
+#define PIN_PC8__FIQ			PINMUX_PIN(PIN_PC8, 3, 1)
+#define PIN_PC8__PCK0			PINMUX_PIN(PIN_PC8, 4, 3)
+#define PIN_PC8__UTXD1			PINMUX_PIN(PIN_PC8, 5, 2)
+#define PIN_PC8__ISC_FIELD		PINMUX_PIN(PIN_PC8, 6, 3)
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__FIQ			PINMUX_PIN(PIN_PC9, 1, 3)
+#define PIN_PC9__GTSUCOMP		PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__ISC_D0			PINMUX_PIN(PIN_PC9, 3, 1)
+#define PIN_PC9__TIOA4			PINMUX_PIN(PIN_PC9, 4, 2)
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__LCDDAT2		PINMUX_PIN(PIN_PC10, 1, 2)
+#define PIN_PC10__GTXCK			PINMUX_PIN(PIN_PC10, 2, 1)
+#define PIN_PC10__ISC_D1		PINMUX_PIN(PIN_PC10, 3, 1)
+#define PIN_PC10__TIOB4			PINMUX_PIN(PIN_PC10, 4, 2)
+#define PIN_PC10__CANTX0		PINMUX_PIN(PIN_PC10, 5, 2)
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__LCDDAT3		PINMUX_PIN(PIN_PC11, 1, 2)
+#define PIN_PC11__GTXEN			PINMUX_PIN(PIN_PC11, 2, 1)
+#define PIN_PC11__ISC_D2		PINMUX_PIN(PIN_PC11, 3, 1)
+#define PIN_PC11__TCLK4			PINMUX_PIN(PIN_PC11, 4, 2)
+#define PIN_PC11__CANRX0		PINMUX_PIN(PIN_PC11, 5, 2)
+#define PIN_PC11__A0_NBS0		PINMUX_PIN(PIN_PC11, 6, 2)
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__LCDDAT4		PINMUX_PIN(PIN_PC12, 1, 2)
+#define PIN_PC12__GRXDV			PINMUX_PIN(PIN_PC12, 2, 1)
+#define PIN_PC12__ISC_D3		PINMUX_PIN(PIN_PC12, 3, 1)
+#define PIN_PC12__URXD3			PINMUX_PIN(PIN_PC12, 4, 1)
+#define PIN_PC12__TK0			PINMUX_PIN(PIN_PC12, 5, 2)
+#define PIN_PC12__A1			PINMUX_PIN(PIN_PC12, 6, 2)
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__LCDDAT5		PINMUX_PIN(PIN_PC13, 1, 2)
+#define PIN_PC13__GRXER			PINMUX_PIN(PIN_PC13, 2, 1)
+#define PIN_PC13__ISC_D4		PINMUX_PIN(PIN_PC13, 3, 1)
+#define PIN_PC13__UTXD3			PINMUX_PIN(PIN_PC13, 4, 1)
+#define PIN_PC13__TF0			PINMUX_PIN(PIN_PC13, 5, 2)
+#define PIN_PC13__A2			PINMUX_PIN(PIN_PC13, 6, 2)
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__LCDDAT6		PINMUX_PIN(PIN_PC14, 1, 2)
+#define PIN_PC14__GRX0			PINMUX_PIN(PIN_PC14, 2, 1)
+#define PIN_PC14__ISC_D5		PINMUX_PIN(PIN_PC14, 3, 1)
+#define PIN_PC14__TD0			PINMUX_PIN(PIN_PC14, 5, 2)
+#define PIN_PC14__A3			PINMUX_PIN(PIN_PC14, 6, 2)
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__LCDDAT7		PINMUX_PIN(PIN_PC15, 1, 2)
+#define PIN_PC15__GRX1			PINMUX_PIN(PIN_PC15, 2, 1)
+#define PIN_PC15__ISC_D6		PINMUX_PIN(PIN_PC15, 3, 1)
+#define PIN_PC15__RD0			PINMUX_PIN(PIN_PC15, 5, 2)
+#define PIN_PC15__A4			PINMUX_PIN(PIN_PC15, 6, 2)
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__LCDDAT10		PINMUX_PIN(PIN_PC16, 1, 2)
+#define PIN_PC16__GTX0			PINMUX_PIN(PIN_PC16, 2, 1)
+#define PIN_PC16__ISC_D7		PINMUX_PIN(PIN_PC16, 3, 1)
+#define PIN_PC16__RK0			PINMUX_PIN(PIN_PC16, 5, 2)
+#define PIN_PC16__A5			PINMUX_PIN(PIN_PC16, 6, 2)
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__LCDDAT11		PINMUX_PIN(PIN_PC17, 1, 2)
+#define PIN_PC17__GTX1			PINMUX_PIN(PIN_PC17, 2, 1)
+#define PIN_PC17__ISC_D8		PINMUX_PIN(PIN_PC17, 3, 1)
+#define PIN_PC17__RF0			PINMUX_PIN(PIN_PC17, 5, 2)
+#define PIN_PC17__A6			PINMUX_PIN(PIN_PC17, 6, 2)
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__LCDDAT12		PINMUX_PIN(PIN_PC18, 1, 2)
+#define PIN_PC18__GMDC			PINMUX_PIN(PIN_PC18, 2, 1)
+#define PIN_PC18__ISC_D9		PINMUX_PIN(PIN_PC18, 3, 1)
+#define PIN_PC18__FLEXCOM3_IO2		PINMUX_PIN(PIN_PC18, 5, 2)
+#define PIN_PC18__A7			PINMUX_PIN(PIN_PC18, 6, 2)
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__LCDDAT13		PINMUX_PIN(PIN_PC19, 1, 2)
+#define PIN_PC19__GMDIO			PINMUX_PIN(PIN_PC19, 2, 1)
+#define PIN_PC19__ISC_D10		PINMUX_PIN(PIN_PC19, 3, 1)
+#define PIN_PC19__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC19, 5, 2)
+#define PIN_PC19__A8			PINMUX_PIN(PIN_PC19, 6, 2)
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__LCDDAT14		PINMUX_PIN(PIN_PC20, 1, 2)
+#define PIN_PC20__GRXCK			PINMUX_PIN(PIN_PC20, 2, 1)
+#define PIN_PC20__ISC_D11		PINMUX_PIN(PIN_PC20, 3, 1)
+#define PIN_PC20__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC20, 5, 2)
+#define PIN_PC20__A9			PINMUX_PIN(PIN_PC20, 6, 2)
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__LCDDAT15		PINMUX_PIN(PIN_PC21, 1, 2)
+#define PIN_PC21__GTXER			PINMUX_PIN(PIN_PC21, 2, 1)
+#define PIN_PC21__ISC_PCK		PINMUX_PIN(PIN_PC21, 3, 1)
+#define PIN_PC21__FLEXCOM3_IO3		PINMUX_PIN(PIN_PC21, 5, 2)
+#define PIN_PC21__A10			PINMUX_PIN(PIN_PC21, 6, 2)
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__LCDDAT18		PINMUX_PIN(PIN_PC22, 1, 2)
+#define PIN_PC22__GCRS			PINMUX_PIN(PIN_PC22, 2, 1)
+#define PIN_PC22__ISC_VSYNC		PINMUX_PIN(PIN_PC22, 3, 1)
+#define PIN_PC22__FLEXCOM3_IO4		PINMUX_PIN(PIN_PC22, 5, 2)
+#define PIN_PC22__A11			PINMUX_PIN(PIN_PC22, 6, 2)
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__LCDDAT19		PINMUX_PIN(PIN_PC23, 1, 2)
+#define PIN_PC23__GCOL			PINMUX_PIN(PIN_PC23, 2, 1)
+#define PIN_PC23__ISC_HSYNC		PINMUX_PIN(PIN_PC23, 3, 1)
+#define PIN_PC23__A12			PINMUX_PIN(PIN_PC23, 6, 2)
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__LCDDAT20		PINMUX_PIN(PIN_PC24, 1, 2)
+#define PIN_PC24__GRX2			PINMUX_PIN(PIN_PC24, 2, 1)
+#define PIN_PC24__ISC_MCK		PINMUX_PIN(PIN_PC24, 3, 1)
+#define PIN_PC24__A13			PINMUX_PIN(PIN_PC24, 6, 2)
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__LCDDAT21		PINMUX_PIN(PIN_PC25, 1, 2)
+#define PIN_PC25__GRX3			PINMUX_PIN(PIN_PC25, 2, 1)
+#define PIN_PC25__ISC_FIELD		PINMUX_PIN(PIN_PC25, 3, 1)
+#define PIN_PC25__A14			PINMUX_PIN(PIN_PC25, 6, 2)
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__LCDDAT22		PINMUX_PIN(PIN_PC26, 1, 2)
+#define PIN_PC26__GTX2			PINMUX_PIN(PIN_PC26, 2, 1)
+#define PIN_PC26__CANTX1		PINMUX_PIN(PIN_PC26, 4, 1)
+#define PIN_PC26__A15			PINMUX_PIN(PIN_PC26, 6, 2)
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__LCDDAT23		PINMUX_PIN(PIN_PC27, 1, 2)
+#define PIN_PC27__GTX3			PINMUX_PIN(PIN_PC27, 2, 1)
+#define PIN_PC27__PCK1			PINMUX_PIN(PIN_PC27, 3, 2)
+#define PIN_PC27__CANRX1		PINMUX_PIN(PIN_PC27, 4, 1)
+#define PIN_PC27__TWD0			PINMUX_PIN(PIN_PC27, 5, 2)
+#define PIN_PC27__A16			PINMUX_PIN(PIN_PC27, 6, 2)
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__LCDPWM		PINMUX_PIN(PIN_PC28, 1, 2)
+#define PIN_PC28__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC28, 2, 1)
+#define PIN_PC28__PCK2			PINMUX_PIN(PIN_PC28, 3, 2)
+#define PIN_PC28__TWCK0			PINMUX_PIN(PIN_PC28, 5, 2)
+#define PIN_PC28__A17			PINMUX_PIN(PIN_PC28, 6, 2)
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__LCDDISP		PINMUX_PIN(PIN_PC29, 1, 2)
+#define PIN_PC29__FLEXCOM4_IO1		PINMUX_PIN(PIN_PC29, 2, 1)
+#define PIN_PC29__A18			PINMUX_PIN(PIN_PC29, 6, 2)
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__LCDVSYNC		PINMUX_PIN(PIN_PC30, 1, 2)
+#define PIN_PC30__FLEXCOM4_IO2		PINMUX_PIN(PIN_PC30, 2, 1)
+#define PIN_PC30__A19			PINMUX_PIN(PIN_PC30, 6, 2)
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__LCDHSYNC		PINMUX_PIN(PIN_PC31, 1, 2)
+#define PIN_PC31__FLEXCOM4_IO3		PINMUX_PIN(PIN_PC31, 2, 1)
+#define PIN_PC31__URXD3			PINMUX_PIN(PIN_PC31, 3, 2)
+#define PIN_PC31__A20			PINMUX_PIN(PIN_PC31, 6, 2)
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__LCDPCK			PINMUX_PIN(PIN_PD0, 1, 2)
+#define PIN_PD0__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD0, 2, 1)
+#define PIN_PD0__UTXD3			PINMUX_PIN(PIN_PD0, 3, 2)
+#define PIN_PD0__GTSUCOMP		PINMUX_PIN(PIN_PD0, 4, 2)
+#define PIN_PD0__A23			PINMUX_PIN(PIN_PD0, 6, 2)
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__LCDDEN			PINMUX_PIN(PIN_PD1, 1, 2)
+#define PIN_PD1__GRXCK			PINMUX_PIN(PIN_PD1, 4, 2)
+#define PIN_PD1__A24			PINMUX_PIN(PIN_PD1, 6, 2)
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__URXD1			PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__GTXER			PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__ISC_MCK		PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__A25			PINMUX_PIN(PIN_PD2, 6, 2)
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__UTXD1			PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FIQ			PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__GCRS			PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__ISC_D11		PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__NWAIT			PINMUX_PIN(PIN_PD3, 6, 2)
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__TWD1			PINMUX_PIN(PIN_PD4, 1, 2)
+#define PIN_PD4__URXD2			PINMUX_PIN(PIN_PD4, 2, 1)
+#define PIN_PD4__GCOL			PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__ISC_D10		PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__NCS0			PINMUX_PIN(PIN_PD4, 6, 2)
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__TWCK1			PINMUX_PIN(PIN_PD5, 1, 2)
+#define PIN_PD5__UTXD2			PINMUX_PIN(PIN_PD5, 2, 1)
+#define PIN_PD5__GRX2			PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__ISC_D9			PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__NCS1			PINMUX_PIN(PIN_PD5, 6, 2)
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__TCK			PINMUX_PIN(PIN_PD6, 1, 2)
+#define PIN_PD6__PCK1			PINMUX_PIN(PIN_PD6, 2, 1)
+#define PIN_PD6__GRX3			PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__ISC_D8			PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__NCS2			PINMUX_PIN(PIN_PD6, 6, 2)
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__TDI			PINMUX_PIN(PIN_PD7, 1, 2)
+#define PIN_PD7__UTMI_RXVAL		PINMUX_PIN(PIN_PD7, 3, 1)
+#define PIN_PD7__GTX2			PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__ISC_D0			PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__NWR1_NBS1		PINMUX_PIN(PIN_PD7, 6, 2)
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__TDO			PINMUX_PIN(PIN_PD8, 1, 2)
+#define PIN_PD8__UTMI_RXERR		PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__GTX3			PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__ISC_D1			PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__NANDRDY		PINMUX_PIN(PIN_PD8, 6, 2)
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__TMS			PINMUX_PIN(PIN_PD9, 1, 2)
+#define PIN_PD9__UTMI_RXACT		PINMUX_PIN(PIN_PD9, 3, 1)
+#define PIN_PD9__GTXCK			PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__ISC_D2			PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__NTRST			PINMUX_PIN(PIN_PD10, 1, 2)
+#define PIN_PD10__UTMI_HDIS		PINMUX_PIN(PIN_PD10, 3, 1)
+#define PIN_PD10__GTXEN			PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__ISC_D3		PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__TIOA1			PINMUX_PIN(PIN_PD11, 1, 3)
+#define PIN_PD11__PCK2			PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__UTMI_LS0		PINMUX_PIN(PIN_PD11, 3, 1)
+#define PIN_PD11__GRXDV			PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__ISC_D4		PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__ISC_MCK		PINMUX_PIN(PIN_PD11, 7, 4)
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__TIOB1			PINMUX_PIN(PIN_PD12, 1, 3)
+#define PIN_PD12__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__UTMI_LS1		PINMUX_PIN(PIN_PD12, 3, 1)
+#define PIN_PD12__GRXER			PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__ISC_D5		PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD12__ISC_D4		PINMUX_PIN(PIN_PD12, 6, 4)
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__TCLK1			PINMUX_PIN(PIN_PD13, 1, 3)
+#define PIN_PD13__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__UTMI_CDRPCSEL0	PINMUX_PIN(PIN_PD13, 3, 1)
+#define PIN_PD13__GRX0			PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__ISC_D6		PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD13__ISC_D5		PINMUX_PIN(PIN_PD13, 6, 4)
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__TCK			PINMUX_PIN(PIN_PD14, 1, 1)
+#define PIN_PD14__FLEXCOM4_IO2		PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__UTMI_CDRPCSEL1	PINMUX_PIN(PIN_PD14, 3, 1)
+#define PIN_PD14__GRX1			PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__ISC_D7		PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__ISC_D6		PINMUX_PIN(PIN_PD14, 6, 4)
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__TDI			PINMUX_PIN(PIN_PD15, 1, 1)
+#define PIN_PD15__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__UTMI_CDRCPDIVEN	PINMUX_PIN(PIN_PD15, 3, 1)
+#define PIN_PD15__GTX0			PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__ISC_PCK		PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__ISC_D7		PINMUX_PIN(PIN_PD15, 6, 4)
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__TDO			PINMUX_PIN(PIN_PD16, 1, 1)
+#define PIN_PD16__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__UTMI_CDRBISTEN	PINMUX_PIN(PIN_PD16, 3, 1)
+#define PIN_PD16__GTX1			PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__ISC_VSYNC		PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__ISC_D8		PINMUX_PIN(PIN_PD16, 6, 4)
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__TMS			PINMUX_PIN(PIN_PD17, 1, 1)
+#define PIN_PD17__UTMI_CDRCPSELDIV	PINMUX_PIN(PIN_PD17, 3, 1)
+#define PIN_PD17__GMDC			PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__ISC_HSYNC		PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__ISC_D9		PINMUX_PIN(PIN_PD17, 6, 4)
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__NTRST			PINMUX_PIN(PIN_PD18, 1, 1)
+#define PIN_PD18__GMDIO			PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__ISC_FIELD		PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__ISC_D10		PINMUX_PIN(PIN_PD18, 6, 4)
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__PCK0			PINMUX_PIN(PIN_PD19, 1, 1)
+#define PIN_PD19__TWD1			PINMUX_PIN(PIN_PD19, 2, 3)
+#define PIN_PD19__URXD2			PINMUX_PIN(PIN_PD19, 3, 3)
+#define PIN_PD19__I2SC0_CK		PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__ISC_D11		PINMUX_PIN(PIN_PD19, 6, 4)
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__TIOA2			PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__TWCK1			PINMUX_PIN(PIN_PD20, 2, 3)
+#define PIN_PD20__UTXD2			PINMUX_PIN(PIN_PD20, 3, 3)
+#define PIN_PD20__I2SC0_MCK		PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__ISC_PCK		PINMUX_PIN(PIN_PD20, 6, 4)
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__TIOB2			PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__TWD0			PINMUX_PIN(PIN_PD21, 2, 4)
+#define PIN_PD21__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD21, 3, 3)
+#define PIN_PD21__I2SC0_WS		PINMUX_PIN(PIN_PD21, 5, 2)
+#define PIN_PD21__ISC_VSYNC		PINMUX_PIN(PIN_PD21, 6, 4)
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__TCLK2			PINMUX_PIN(PIN_PD22, 1, 3)
+#define PIN_PD22__TWCK0			PINMUX_PIN(PIN_PD22, 2, 4)
+#define PIN_PD22__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD22, 3, 3)
+#define PIN_PD22__I2SC0_DI0		PINMUX_PIN(PIN_PD22, 5, 2)
+#define PIN_PD22__ISC_HSYNC		PINMUX_PIN(PIN_PD22, 6, 4)
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__URXD2			PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__FLEXCOM4_IO2		PINMUX_PIN(PIN_PD23, 3, 3)
+#define PIN_PD23__I2SC0_DO0		PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__ISC_FIELD		PINMUX_PIN(PIN_PD23, 6, 4)
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__UTXD2			PINMUX_PIN(PIN_PD24, 1, 2)
+#define PIN_PD24__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD24, 3, 3)
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__SPI1_SPCK		PINMUX_PIN(PIN_PD25, 1, 3)
+#define PIN_PD25__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD25, 3, 3)
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__SPI1_MOSI		PINMUX_PIN(PIN_PD26, 1, 3)
+#define PIN_PD26__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD26, 3, 2)
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__SPI1_MISO		PINMUX_PIN(PIN_PD27, 1, 3)
+#define PIN_PD27__TCK			PINMUX_PIN(PIN_PD27, 2, 3)
+#define PIN_PD27__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD27, 3, 2)
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__SPI1_NPCS0		PINMUX_PIN(PIN_PD28, 1, 3)
+#define PIN_PD28__TCI			PINMUX_PIN(PIN_PD28, 2, 3)
+#define PIN_PD28__FLEXCOM2_IO2		PINMUX_PIN(PIN_PD28, 3, 2)
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__SPI1_NPCS1		PINMUX_PIN(PIN_PD29, 1, 3)
+#define PIN_PD29__TDO			PINMUX_PIN(PIN_PD29, 2, 3)
+#define PIN_PD29__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD29, 3, 2)
+#define PIN_PD29__TIOA3			PINMUX_PIN(PIN_PD29, 4, 3)
+#define PIN_PD29__TWD0			PINMUX_PIN(PIN_PD29, 5, 3)
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__SPI1_NPCS2		PINMUX_PIN(PIN_PD30, 1, 3)
+#define PIN_PD30__TMS			PINMUX_PIN(PIN_PD30, 2, 3)
+#define PIN_PD30__FLEXCOM2_IO4		PINMUX_PIN(PIN_PD30, 3, 2)
+#define PIN_PD30__TIOB3			PINMUX_PIN(PIN_PD30, 4, 3)
+#define PIN_PD30__TWCK0			PINMUX_PIN(PIN_PD30, 5, 3)
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__ADTRG			PINMUX_PIN(PIN_PD31, 1, 1)
+#define PIN_PD31__NTRST			PINMUX_PIN(PIN_PD31, 2, 3)
+#define PIN_PD31__IRQ			PINMUX_PIN(PIN_PD31, 3, 4)
+#define PIN_PD31__TCLK3			PINMUX_PIN(PIN_PD31, 4, 3)
+#define PIN_PD31__PCK0			PINMUX_PIN(PIN_PD31, 5, 2)
diff --git a/arch/arm/boot/dts/microchip/sama5d2.dtsi b/arch/arm/boot/dts/microchip/sama5d2.dtsi
new file mode 100644
index 0000000000000..daeeb24e5f4db
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d2.dtsi
@@ -0,0 +1,1166 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel SAMA5D2 family SoC";
+	compatible = "atmel,sama5d2";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	etb@740000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x740000 0x1000>;
+
+		clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+		clock-names = "apb_pclk";
+
+		in-ports {
+			port {
+				etb_in: endpoint {
+					remote-endpoint = <&etm_out>;
+				};
+			};
+		};
+	};
+
+	etm@73c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x73c000 0x1000>;
+
+		clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+		clock-names = "apb_pclk";
+
+		out-ports {
+			port {
+				etm_out: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
+			};
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	ns_sram: sram@200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00200000 0x20000>;
+	};
+
+	resistive_touch: resistive-touch {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+		io-channel-names = "x", "y", "pressure";
+		touchscreen-min-pressure = <50000>;
+		status = "disabled";
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@100000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00100000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00100000 0x2400>;
+
+		};
+
+		usb0: gadget@300000 {
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00300000 0x100000
+			       0xfc02c000 0x400>;
+			interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		usb1: ohci@400000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00400000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@500000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		L2: cache-controller@a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x10000000 0x10000000
+			       0x60000000 0x30000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x60000000 0x10000000
+				  0x2 0x0 0x70000000 0x10000000
+				  0x3 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xa0000000 0x300>;
+			interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
+			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 31>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xb0000000 0x300>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
+			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 32>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		nfc_io: nfc-io@c0000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0xc0000000 0x8000000>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,sama5d2-hlcdc";
+				reg = <0xf0000000 0x2000>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			isc: isc@f0008000 {
+				compatible = "atmel,sama5d2-isc";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>;
+				clock-names = "hclock", "iscck", "gck";
+				#clock-cells = <0>;
+				clock-output-names = "isc-mck";
+				status = "disabled";
+			};
+
+			ramc0: ramc@f000c000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf000c000 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0010000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0010000 0x1000>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "dma_clk";
+			};
+
+			/* Place dma1 here despite its address */
+			dma1: dma-controller@f0004000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0004000 0x1000>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: clock-controller@f0014000 {
+				compatible = "atmel,sama5d2-pmc", "syscon";
+				reg = <0xf0014000 0x160>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			qspi0: spi@f0020000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+				clock-names = "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			qspi1: spi@f0024000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
+				clock-names = "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			sha: crypto@f0028000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf0028000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "sha_clk";
+			};
+
+			aes: crypto@f002c000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf002c000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "aes_clk";
+			};
+
+			spi0: spi@f8000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8000000 0x100>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@f8004000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf8004000 0x4000>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					AT91_XDMAC_DT_PERID(21))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					AT91_XDMAC_DT_PERID(22))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			macb0: ethernet@f8008000 {
+				compatible = "atmel,sama5d2-gem";
+				reg = <0xf8008000 0x1000>;
+				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3		/* Queue 0 */
+					      66 IRQ_TYPE_LEVEL_HIGH 3          /* Queue 1 */
+					      67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f800c000 {
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
+			};
+
+			tcb1: timer@f8010000 {
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8010000 0x100>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_GCK 36>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
+			};
+
+			hsmc: hsmc@f8014000 {
+				compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+				reg = <0xf8014000 0x1000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pmecc: ecc-engine@f8014070 {
+					compatible = "atmel,sama5d2-pmecc";
+					reg = <0xf8014070 0x490>,
+					      <0xf8014500 0x200>;
+				};
+			};
+
+			pdmic: pdmic@f8018000 {
+				compatible = "atmel,sama5d2-pdmic";
+				reg = <0xf8018000 0x124>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(50))>;
+				dma-names = "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			uart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xf8028000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f802c000 {
+				compatible = "atmel,sama5d2-pwm";
+				reg = <0xf802c000 0x4000>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8030000 {
+				compatible = "atmel,sama5d2-sfr", "syscon";
+				reg = <0xf8030000 0x98>;
+			};
+
+			flx0: flexcom@f8034000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8034000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8034000 0x800>;
+				status = "disabled";
+
+				uart5: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi2: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c2: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx1: flexcom@f8038000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8038000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8038000 0x800>;
+				status = "disabled";
+
+				uart6: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi3: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c3: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			securam: sram@f8044000 {
+				compatible = "atmel,sama5d2-securam", "mmio-sram";
+				reg = <0xf8044000 0x1420>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				no-memory-wc;
+				ranges = <0 0xf8044000 0x1420>;
+			};
+
+			reset_controller: reset-controller@f8048000 {
+				compatible = "atmel,sama5d3-rstc";
+				reg = <0xf8048000 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: poweroff@f8048010 {
+				compatible = "atmel,sama5d2-shdwc";
+				reg = <0xf8048010 0x10>;
+				clocks = <&clk32k>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+			};
+
+			pit: timer@f8048030 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xf8048030 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			};
+
+			watchdog: watchdog@f8048040 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xf8048040 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@f8048050 {
+				compatible = "atmel,sama5d4-sckc";
+				reg = <0xf8048050 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc: rtc@f80480b0 {
+				compatible = "atmel,sama5d2-rtc";
+				reg = <0xf80480b0 0x30>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+
+			i2s0: i2s@f8050000 {
+				compatible = "atmel,sama5d2-i2s";
+				reg = <0xf8050000 0x100>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_GCK 54>;
+				clock-names = "pclk", "gclk";
+				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S0_MUX>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 54>;
+				status = "disabled";
+			};
+
+			can0: can@f8054000 {
+				compatible = "bosch,m_can";
+				reg = <0xf8054000 0x4000>, <0x210000 0x1c00>;
+				reg-names = "m_can", "message_ram";
+				interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <64 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-names = "int0", "int1";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>;
+				clock-names = "hclk", "cclk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 56>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				assigned-clock-rates = <40000000>;
+				bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+				status = "disabled";
+			};
+
+			spi1: spi@fc000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc000000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart3: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(41))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(42))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart4: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(43))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx", "rx";
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			flx2: flexcom@fc010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc010000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc010000 0x800>;
+				status = "disabled";
+
+				uart7: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi4: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c4: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx3: flexcom@fc014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc014000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc014000 0x800>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi5: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c5: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+			};
+
+			flx4: flexcom@fc018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc018000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc018000 0x800>;
+				status = "disabled";
+
+				uart9: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi6: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c6: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			trng@fc01c000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfc01c000 0x100>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			};
+
+			aic: interrupt-controller@fc020000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d2-aic";
+				interrupt-controller;
+				reg = <0xfc020000 0x200>;
+				atmel,external-irqs = <49>;
+			};
+
+			i2c1: i2c@fc028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xfc028000 0x100>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			adc: adc@fc030000 {
+				compatible = "atmel,sama5d2-adc";
+				reg = <0xfc030000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "adc_clk";
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			pioA: pinctrl@fc038000 {
+				compatible = "atmel,sama5d2-pinctrl";
+				reg = <0xfc038000 0x600>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <68 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <69 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <70 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			};
+
+			pioBU: secumod@fc040000 {
+				compatible = "atmel,sama5d2-secumod", "syscon";
+				reg = <0xfc040000 0x100>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			tdes: crypto@fc044000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xfc044000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "tdes_clk";
+			};
+
+			classd: classd@fc048000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xfc048000 0x100>;
+				interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(47))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			i2s1: i2s@fc04c000 {
+				compatible = "atmel,sama5d2-i2s";
+				reg = <0xfc04c000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
+				clock-names = "pclk", "gclk";
+				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
+				status = "disabled";
+			};
+
+			can1: can@fc050000 {
+				compatible = "bosch,m_can";
+				reg = <0xfc050000 0x4000>, <0x210000 0x3800>;
+				reg-names = "m_can", "message_ram";
+				interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <65 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-names = "int0", "int1";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
+				clock-names = "hclk", "cclk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				assigned-clock-rates = <40000000>;
+				bosch,mram-cfg = <0x1c00 0 0 64 0 0 32 32>;
+				status = "disabled";
+			};
+
+			sfrbu: sfr@fc05c000 {
+				compatible = "atmel,sama5d2-sfrbu", "syscon";
+				reg = <0xfc05c000 0x20>;
+			};
+
+			chipid@fc069000 {
+				compatible = "atmel,sama5d2-chipid";
+				reg = <0xfc069000 0x8>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d29.dtsi b/arch/arm/boot/dts/microchip/sama5d29.dtsi
new file mode 100644
index 0000000000000..17991c28a2563
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d29.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d29.dtsi - Device Tree Include file for SAMA5D29 SoC of the SAMA5D2
+ * family.
+ *
+ *  Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ *  Author: Hari Prasath <Hari.PrasathGE@microchip.com>
+ *
+ */
+
+#include "sama5d2.dtsi"
+
+&macb0 {
+	compatible = "atmel,sama5d29-gem";
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi
new file mode 100644
index 0000000000000..d9e66700d1c20
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi
@@ -0,0 +1,1126 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
+ *                applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel SAMA5D3 family SoC";
+	compatible = "atmel,sama5d3", "atmel,sama5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0x0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x20000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mmc0: mmc@f0000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0000000 0x600>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "mci_clk";
+			};
+
+			spi0: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f0008000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f0010000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf0010000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			i2c0: i2c@f0014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0014000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f0018000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0018000 0x4000>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				status = "disabled";
+			};
+
+			usart0: serial@f001c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf001c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f0020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f002c000 {
+				compatible = "atmel,sama5d3-pwm";
+				reg = <0xf002c000 0x300>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				status = "disabled";
+			};
+
+			isi: isi@f0034000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf0034000 0x4000>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			sfr: sfr@f0038000 {
+				compatible = "atmel,sama5d3-sfr", "syscon";
+				reg = <0xf0038000 0x60>;
+			};
+
+			mmc1: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+				clock-names = "mci_clk";
+			};
+
+			spi1: spi@f8008000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8008000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@f800c000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf800c000 0x4000>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			adc0: adc@f8018000 {
+				compatible = "atmel,sama5d3-adc";
+				reg = <0xf8018000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					&pinctrl_adc0_ad8
+					&pinctrl_adc0_ad9
+					&pinctrl_adc0_ad10
+					&pinctrl_adc0_ad11
+					>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0xfff>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-vref = <3000>;
+				atmel,adc-sample-hold-time = <11>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@f801c000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf801c000 0x4000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				pinctrl-1 = <&pinctrl_i2c2_gpio>;
+				sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				status = "disabled";
+			};
+
+			usart2: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			sha: crypto@f8034000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf8034000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				clock-names = "sha_clk";
+			};
+
+			aes: crypto@f8038000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf8038000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "aes_clk";
+			};
+
+			tdes: crypto@f803c000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf803c000 0x100>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				clock-names = "tdes_clk";
+			};
+
+			trng@f8040000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xf8040000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+			};
+
+			hsmc: hsmc@ffffc000 {
+				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+				reg = <0xffffc000 0x1000>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pmecc: ecc-engine@ffffc070 {
+					compatible = "atmel,at91sam9g45-pmecc";
+					reg = <0xffffc070 0x490>,
+					      <0xffffc500 0x100>;
+				};
+			};
+
+			dma0: dma-controller@ffffe600 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe600 0x200>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "dma_clk";
+			};
+
+			dma1: dma-controller@ffffe800 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe800 0x200>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
+				clock-names = "dma_clk";
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xffffea00 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d3-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <47>;
+			};
+
+			pinctrl: pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0xc0fc0000 0xc0ff0000	/* pioA */
+					0xffffffff 0x0ff8ffff 0x00000000	/* pioB */
+					0xffffffff 0xbc00f1ff 0x7c00fc00	/* pioC */
+					0xffffffff 0xc001c0e0 0x0001c1e0	/* pioD */
+					0xffffffff 0xbf9f8000 0x18000000	/* pioE */
+					>;
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD19 periph A ADTRG */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD20 periph A AD0 */
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD21 periph A AD1 */
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD22 periph A AD2 */
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD23 periph A AD3 */
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD24 periph A AD4 */
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins =
+							<AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD25 periph A AD5 */
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins =
+							<AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD26 periph A AD6 */
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins =
+							<AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD27 periph A AD7 */
+					};
+					pinctrl_adc0_ad8: adc0_ad8 {
+						atmel,pins =
+							<AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD28 periph A AD8 */
+					};
+					pinctrl_adc0_ad9: adc0_ad9 {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD29 periph A AD9 */
+					};
+					pinctrl_adc0_ad10: adc0_ad10 {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD30 periph A AD10, conflicts with PCK0 */
+					};
+					pinctrl_adc0_ad11: adc0_ad11 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD31 periph A AD11, conflicts with PCK1 */
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_addr: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nand_addr: ebi-addr-1 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs0: ebi-cs0-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs1: ebi-cs1-0 {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs2: ebi-cs2-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwait: ebi-nwait-0 {
+						atmel,pins =
+							<AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
+					};
+
+					pinctrl_i2c0_gpio: i2c0-gpio {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
+					};
+
+					pinctrl_i2c1_gpio: i2c1-gpio {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
+							 AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
+					};
+
+					pinctrl_i2c2_gpio: i2c2-gpio {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
+							 AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
+							 AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
+							 AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
+							 AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
+							 AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
+							 AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
+							 AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
+							 AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
+							 AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
+							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+							 AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD9 periph A MCI0_CK */
+							 AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD0 periph A MCI0_CDA with pullup */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD1 periph A MCI0_DA0 with pullup */
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD2 periph A MCI0_DA1 with pullup */
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD3 periph A MCI0_DA2 with pullup */
+							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD4 periph A MCI0_DA3 with pullup */
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
+							 AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD7 periph A MCI0_DA6 with pullup, conflicts with TCLK0, PWMH3 */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A MCI1_CK, conflicts with GRX5 */
+							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
+							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
+							 AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
+					};
+				};
+
+				nand0 {
+					pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PE21 periph A with pullup */
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PE22 periph A with pullup */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D4 and LCDDAT20 */
+					};
+					pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX0 */
+					};
+					pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D5 and LCDDAT21 */
+					};
+					pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX1 */
+					};
+
+					pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D6 and LCDDAT22 */
+					};
+					pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX0 */
+					};
+					pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with G125CKO and RTS1 */
+					};
+					pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D7 and LCDDAT23 */
+					};
+					pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
+						atmel,pins =
+							<AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX1 */
+					};
+					pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with IRQ */
+					};
+
+					pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXCK */
+					};
+					pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA4 and TIOA0 */
+					};
+					pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXEN */
+					};
+					pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA5 and TIOB0 */
+					};
+
+					pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXDV */
+					};
+					pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
+						atmel,pins =
+							<AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA6 and TCLK0 */
+					};
+					pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXER */
+					};
+					pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
+						atmel,pins =
+							<AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA7 */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A SPI0_MISO pin */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A SPI0_MOSI pin */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A SPI1_MISO pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A SPI1_MOSI pin */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC24 periph A SPI1_SPCK pin */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A TK0 */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC17 periph A TF0 */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC18 periph A TD0 */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A RK0 */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC20 periph A RF0 */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC21 periph A RD0 */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB2 periph B TK1, conflicts with GTX2 */
+							 AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB3 periph B TF1, conflicts with GTX3 */
+							 AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB6 periph B TD1, conflicts with TD1 */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx {
+						atmel,pins =
+							<AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB7 periph B RK1, conflicts with EREFCK */
+							 AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB10 periph B RF1, conflicts with GTXER */
+							 AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB11 periph B RD1, conflicts with GRXCK */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
+							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB26 periph A, conflicts with GRX7 */
+							 AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A, conflicts with G125CKO */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with A25 */
+							 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts NCS0 */
+					};
+
+					pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE23 periph B, conflicts with A23 */
+							 AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE24 periph B, conflicts with A24 */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with A18 */
+							 AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with A19 */
+					};
+
+					pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE16 periph B, conflicts with A16 */
+							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE17 periph B, conflicts with A17 */
+					};
+				};
+
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x100>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x100>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x100>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x100>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x100>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,sama5d3-pmc", "syscon";
+				reg = <0xfffffc00 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset_controller: reset-controller@fffffe00 {
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: poweroff@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			watchdog: watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "atmel,sama5d3-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+		};
+
+		nfc_sram: sram@200000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x200000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x200000 0x2400>;
+		};
+
+		usb0: gadget@500000 {
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00500000 0x100000
+			       0xf8030000 0x4000>;
+			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		usb1: ohci@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x10000000 0x10000000
+			       0x40000000 0x30000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x40000000 0x10000000
+				  0x2 0x0 0x50000000 0x10000000
+				  0x3 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		nfc_io: nfc-io@70000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x70000000 0x8000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d31.dtsi b/arch/arm/boot/dts/microchip/sama5d31.dtsi
new file mode 100644
index 0000000000000..cbe8f275ecc45
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d31.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d31ek.dts b/arch/arm/boot/dts/microchip/sama5d31ek.dts
new file mode 100644
index 0000000000000..1f2dfb3127ab9
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d31ek.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d31.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D31-EK";
+	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		led-d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d33.dtsi b/arch/arm/boot/dts/microchip/sama5d33.dtsi
new file mode 100644
index 0000000000000..146fd59acea5e
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d33.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+
+/ {
+	compatible = "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d33ek.dts b/arch/arm/boot/dts/microchip/sama5d33ek.dts
new file mode 100644
index 0000000000000..7d4ae16829339
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d33ek.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d33.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D33-EK";
+	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d34.dtsi b/arch/arm/boot/dts/microchip/sama5d34.dtsi
new file mode 100644
index 0000000000000..132918c889a06
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d34.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+
+/ {
+	compatible = "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d34ek.dts b/arch/arm/boot/dts/microchip/sama5d34ek.dts
new file mode 100644
index 0000000000000..bffd61397cb53
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d34ek.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d34.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D34-EK";
+	compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				24c256@50 {
+					compatible = "atmel,24c256";
+					reg = <0x50>;
+					pagesize = <64>;
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		led-d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d35.dtsi b/arch/arm/boot/dts/microchip/sama5d35.dtsi
new file mode 100644
index 0000000000000..b2ccfa77c4be8
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d35.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+#include "sama5d3_tcb1.dtsi"
+
+/ {
+	compatible = "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d35ek.dts b/arch/arm/boot/dts/microchip/sama5d35ek.dts
new file mode 100644
index 0000000000000..8edfcebb1df08
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d35ek.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d35.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
+
+/ {
+	model = "Atmel SAMA5D35-EK";
+	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d36.dtsi b/arch/arm/boot/dts/microchip/sama5d36.dtsi
new file mode 100644
index 0000000000000..5d88f99671384
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d36.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Josh Wu <josh.wu@atmel.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_tcb1.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d36ek.dts b/arch/arm/boot/dts/microchip/sama5d36ek.dts
new file mode 100644
index 0000000000000..26950f9284c2f
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d36ek.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Josh Wu <josh.wu@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
+
+/ {
+	model = "Atmel SAMA5D36-EK";
+	compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d36ek_cmp.dts b/arch/arm/boot/dts/microchip/sama5d36ek_cmp.dts
new file mode 100644
index 0000000000000..66695b9a3e770
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d36ek_cmp.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb_cmp.dtsi"
+
+/ {
+	model = "Atmel SAMA5D36EK-CMP";
+	compatible = "atmel,sama5d36ek-cmp", "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3_can.dtsi b/arch/arm/boot/dts/microchip/sama5d3_can.dtsi
new file mode 100644
index 0000000000000..9ac29bf3f9336
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3_can.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * CAN support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+							 AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B RX, conflicts with GCRS */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B TX, conflicts with GCOL */
+					};
+				};
+
+			};
+
+			can0: can@f000c000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf000c000 0x300>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8010000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8010000 0x300>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3_emac.dtsi b/arch/arm/boot/dts/microchip/sama5d3_emac.dtsi
new file mode 100644
index 0000000000000..5d7ce13de8ccf
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3_emac.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC0 periph A ETX0, conflicts with TIOA3 */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A ETX1, conflicts with TIOB3 */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A ERX0, conflicts with TCLK3 */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A ERX1, conflicts with TIOA4 */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC4 periph A ETXEN, conflicts with TIOB4 */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A ERXER, conflicts with TIOA5 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A EREFCK, conflicts with TIOB5 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A EMDC, conflicts with TCLK5 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC9 periph A EMDIO  */
+					};
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+			};
+
+			macb1: ethernet@f802c000 {
+				compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_PERIPHERAL 35>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3_gmac.dtsi b/arch/arm/boot/dts/microchip/sama5d3_gmac.dtsi
new file mode 100644
index 0000000000000..884df7a54dbb6
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3_gmac.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Gigabit Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb0 {
+					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A GTX0, conflicts with PWMH0 */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A GTX1, conflicts with PWML0 */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A GTX2, conflicts with TK1 */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A GTX3, conflicts with TF1 */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A GRX0, conflicts with PWMH1 */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A GRX1, conflicts with PWML1 */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A GRX2, conflicts with TD1 */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A GRX3, conflicts with RK1 */
+					};
+					pinctrl_macb0_data_gmii: macb0_data_gmii {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
+							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB24 periph B GRX5, conflicts with MCI1_CK */
+							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB25 periph B GRX6, conflicts with SCK1 */
+							 AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB26 periph B GRX7, conflicts with CTS1 */
+					};
+					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A GTXCK, conflicts with PWMH2 */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A G125CK */
+					};
+					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A GTXER, conflicts with RF1 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A GRXDV, conflicts with PWMH3 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A GCRS, conflicts with CANRX1 */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A GCOL, conflicts with CANTX1 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB27 periph B G125CKO */
+					};
+
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				compatible = "atmel,sama5d3-gem";
+				reg = <0xf0028000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3_lcd.dtsi b/arch/arm/boot/dts/microchip/sama5d3_lcd.dtsi
new file mode 100644
index 0000000000000..308d2fc276d61
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3_lcd.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_lcd.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * LCD support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			hlcdc: hlcdc@f0030000 {
+				compatible = "atmel,sama5d3-hlcdc";
+				reg = <0xf0030000 0x2000>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb666_alt: lcd-rgb-2-alt {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+
+					pinctrl_lcd_rgb888_alt: lcd-rgb-3-alt {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3_mci2.dtsi b/arch/arm/boot/dts/microchip/sama5d3_mci2.dtsi
new file mode 100644
index 0000000000000..7141ee97ec3e6
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3_mci2.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 3 MMC ports
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				mmc2 {
+					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC10 periph A MCI2_CDA with pullup */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC11 periph A MCI2_DA0 with pullup */
+					};
+					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+					};
+				};
+			};
+
+			mmc2: mmc@f8004000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8004000 0x600>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				clock-names = "mci_clk";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/microchip/sama5d3_tcb1.dtsi
new file mode 100644
index 0000000000000..2b18c5c2cc033
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3_tcb1.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 2 TC blocks.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	aliases {
+		tcb1 = &tcb1;
+	};
+
+	ahb {
+		apb {
+			tcb1: timer@f8014000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8014000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3_uart.dtsi b/arch/arm/boot/dts/microchip/sama5d3_uart.dtsi
new file mode 100644
index 0000000000000..44d1173f2ffb7
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3_uart.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * UART support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	aliases {
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3xcm.dtsi b/arch/arm/boot/dts/microchip/sama5d3xcm.dtsi
new file mode 100644
index 0000000000000..7d1d7859edb43
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3xcm.dtsi
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+/ {
+	compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
+			tcb0: timer@f0010000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+		};
+
+		ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_addr &pinctrl_ebi_cs0>;
+			pinctr-name = "default";
+			status = "okay";
+
+			nor: flash@0,0 {
+				compatible = "cfi-flash";
+				linux,mtd-name = "physmap-flash.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x0 0x0 0x1000000>;
+				bank-width = <2>;
+				atmel,smc-read-mode = "nrd";
+				atmel,smc-write-mode = "nwe";
+				atmel,smc-bus-width = <16>;
+				atmel,smc-ncs-rd-setup-ns = <0>;
+				atmel,smc-ncs-wr-setup-ns = <0>;
+				atmel,smc-nwe-setup-ns = <8>;
+				atmel,smc-nrd-setup-ns = <16>;
+				atmel,smc-ncs-rd-pulse-ns = <84>;
+				atmel,smc-ncs-wr-pulse-ns = <84>;
+				atmel,smc-nrd-pulse-ns = <76>;
+				atmel,smc-nwe-pulse-ns = <76>;
+				atmel,smc-nrd-cycle-ns = <107>;
+				atmel,smc-nwe-cycle-ns = <84>;
+				atmel,smc-tdf-ns = <16>;
+			};
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <4>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-d2 {
+			label = "d2";
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
new file mode 100644
index 0000000000000..830a0954ba1b0
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+
+/ {
+	compatible = "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
+			tcb0: timer@f0010000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "disabled";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddana_reg: LDO_REG1 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG2 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <4>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-d2 {
+			label = "d2";
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3xdm.dtsi b/arch/arm/boot/dts/microchip/sama5d3xdm.dtsi
new file mode 100644
index 0000000000000..3c1c4d62fbf92
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3xdm.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3dm.dtsi - Device Tree file for SAMA5 display module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+/ {
+	ahb {
+		apb {
+			i2c1: i2c@f0018000 {
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <31 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi
new file mode 100644
index 0000000000000..3652c9e241244
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+#include "sama5d3xcm.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+					clock-names = "mclk";
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD30 periph B */
+					};
+
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@500000 {
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
+					   &pioD 26 GPIO_ACTIVE_LOW
+					   &pioD 27 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@700000 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi
new file mode 100644
index 0000000000000..5d9e97fecf834
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+#include "sama5d3xcm_cmp.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+					clock-names = "mclk";
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				pinctrl-1 = <
+					&pinctrl_adc0_adtrg_sleep
+					&pinctrl_adc0_ad0_sleep
+					&pinctrl_adc0_ad1_sleep
+					&pinctrl_adc0_ad2_sleep
+					&pinctrl_adc0_ad3_sleep
+					&pinctrl_adc0_ad4_sleep
+					>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					/*interrupt-parent = <&pioE>;*/
+					/*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
+					reg = <1>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				adc0 {
+					pinctrl_adc0_adtrg_sleep: adc0_adtrg_1 {
+						atmel,pins =
+							<AT91_PIOD 19 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad0_sleep: adc0_ad0_1 {
+						atmel,pins =
+							<AT91_PIOD 20 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad1_sleep: adc0_ad1_1 {
+						atmel,pins =
+							<AT91_PIOD 21 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad2_sleep: adc0_ad2_1 {
+						atmel,pins =
+							<AT91_PIOD 22 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad3_sleep: adc0_ad3_1 {
+						atmel,pins =
+							<AT91_PIOD 23 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad4_sleep: adc0_ad4_1 {
+						atmel,pins =
+							<AT91_PIOD 24 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+				};
+
+				board {
+					pinctrl_gpio_keys: gpio_keys {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@500000 {
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
+	};
+
+	/* Conflict with LCD pins */
+	gpio_keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3xmb_emac.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb_emac.dtsi
new file mode 100644
index 0000000000000..a5dd41cd9522d
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb_emac.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3xmb_emac.dts - Device Tree Include file for SAMA5D3x mother board
+ * Ethernet
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+
+/ {
+	ahb {
+		apb {
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3xmb_gmac.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb_gmac.dtsi
new file mode 100644
index 0000000000000..d750da38ff3cc
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb_gmac.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3xmb_gmac.dtsi - Device Tree Include file for SAMA5D3x motherboard
+ * Gigabit Ethernet
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+
+/ {
+	ahb {
+		apb {
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi
new file mode 100644
index 0000000000000..41284e013f531
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi
@@ -0,0 +1,1453 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel SAMA5D4 family SoC";
+	compatible = "atmel,sama5d4";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &usart3;
+		serial1 = &usart4;
+		serial2 = &usart2;
+		serial3 = &usart0;
+		serial4 = &usart1;
+		serial5 = &uart0;
+		serial6 = &uart1;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		pwm0 = &pwm0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	ns_sram: sram@210000 {
+		compatible = "mmio-sram";
+		reg = <0x00210000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00210000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@100000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x100000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x100000 0x2400>;
+		};
+
+		vdec0: vdec@300000 {
+			compatible = "microchip,sama5d4-vdec";
+			reg = <0x00300000 0x100000>;
+			interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+		};
+
+		usb0: gadget@400000 {
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00400000 0x100000
+			       0xfc02c000 0x4000>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		usb1: ohci@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@600000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 46>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		L2: cache-controller@a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x10000000 0x10000000
+			       0x60000000 0x28000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x60000000 0x10000000
+				  0x2 0x0 0x70000000 0x10000000
+				  0x3 0x0 0x80000000 0x8000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		nfc_io: nfc-io@90000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x90000000 0x8000000>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,sama5d4-hlcdc";
+				reg = <0xf0000000 0x4000>;
+				interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			dma1: dma-controller@f0004000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0004000 0x200>;
+				interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 50>;
+				clock-names = "dma_clk";
+			};
+
+			isi: isi@f0008000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			ramc0: ramc@f0010000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf0010000 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0014000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0014000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: clock-controller@f0018000 {
+				compatible = "atmel,sama5d4-pmc", "syscon";
+				reg = <0xf0018000 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			mmc0: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(0))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				clock-names = "mci_clk";
+			};
+
+			uart0: serial@f8004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(22))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f8008000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf8008000 0x4000>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(26))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f800c000 {
+				compatible = "atmel,sama5d3-pwm";
+				reg = <0xf800c000 0x300>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				status = "disabled";
+			};
+
+			spi0: spi@f8010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8010000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(10))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8014000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8014000 0x4000>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(2))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8018000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8018000 0x4000>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioE 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				status = "disabled";
+			};
+
+			tcb0: timer@f801c000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf801c000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			macb0: ethernet@f8020000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xf8020000 0x100>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_PERIPHERAL 54>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			i2c2: i2c@f8024000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8024000 0x4000>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(6))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				pinctrl-1 = <&pinctrl_i2c2_gpio>;
+				sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioB 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8028000 {
+				compatible = "atmel,sama5d4-sfr", "syscon";
+				reg = <0xf8028000 0x60>;
+			};
+
+			usart0: serial@f802c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf802c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8030000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8030000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fc000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfc000000 0x600>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+				clock-names = "mci_clk";
+			};
+
+			uart1: serial@fc004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(24))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(16))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(18))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart4: serial@fc010000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc010000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(20))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fc014000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfc014000 0x4000>;
+				interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(28))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi1: spi@fc018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc018000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(12))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi2: spi@fc01c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc01c000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(14))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			tcb1: timer@fc020000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfc020000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb2: timer@fc024000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfc024000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			macb1: ethernet@fc028000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xfc028000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_PERIPHERAL 55>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			trng@fc030000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfc030000 0x100>;
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
+			};
+
+			adc0: adc@fc034000 {
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xfc034000 0x100>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0x01f>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-vref = <3000>;
+				atmel,adc-sample-hold-time = <11>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "disabled";
+			};
+
+			aes: crypto@fc044000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xfc044000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(41))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "aes_clk";
+			};
+
+			tdes: crpyto@fc04c000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xfc04c000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(42))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(43))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "tdes_clk";
+			};
+
+			sha: crypto@fc050000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xfc050000 0x100>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "sha_clk";
+			};
+
+			hsmc: smc@fc05c000 {
+				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+				reg = <0xfc05c000 0x1000>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pmecc: ecc-engine@ffffc070 {
+					compatible = "atmel,sama5d4-pmecc";
+					reg = <0xfc05c070 0x490>,
+					      <0xfc05c500 0x100>;
+				};
+			};
+
+			reset_controller: reset-controller@fc068600 {
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+				reg = <0xfc068600 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: poweroff@fc068610 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfc068610 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fc068630 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfc068630 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			};
+
+			watchdog: watchdog@fc068640 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xfc068640 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@fc068650 {
+				compatible = "atmel,sama5d4-sckc";
+				reg = <0xfc068650 0x4>;
+				#clock-cells = <0>;
+				clocks = <&slow_xtal>;
+			};
+
+			rtc@fc0686b0 {
+				compatible = "atmel,sama5d4-rtc";
+				reg = <0xfc0686b0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+
+			dbgu: serial@fc069000 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfc069000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+
+			pinctrl: pinctrl@fc06a000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+				ranges = <0xfc068000 0xfc068000 0x100
+					  0xfc06a000 0xfc06a000 0x4000>;
+				/* WARNING: revisit as pin spec has changed */
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0x3ffcfe7c 0x1c010101	/* pioA */
+					0x7fffffff 0xfffccc3a 0x3f00cc3a	/* pioB */
+					0xffffffff 0x3ff83fff 0xff00ffff	/* pioC */
+					0xb003ff00 0x8002a800 0x00000000	/* pioD */
+					0xffffffff 0x7fffffff 0x76fff1bf	/* pioE */
+					>;
+
+				pioA: gpio@fc06a000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06a000 0x100>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				};
+
+				pioB: gpio@fc06b000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06b000 0x100>;
+					interrupts = <24 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				};
+
+				pioC: gpio@fc06c000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06c000 0x100>;
+					interrupts = <25 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				};
+
+				pioD: gpio@fc068000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc068000 0x100>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+
+				pioE: gpio@fc06d000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06d000 0x100>;
+					interrupts = <26 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				};
+
+				/* pinctrl pin settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with USBA_VBUS */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with D14 and TDI */
+							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;		/* conflicts with D15 and TDO */
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_addr: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nand_addr: ebi-addr-1 {
+						atmel,pins =
+							<AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs0: ebi-cs0-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs1: ebi-cs1-0 {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs2: ebi-cs2-0 {
+						atmel,pins =
+							<AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs3: ebi-cs3-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_data_8_15: ebi-data-msb-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nandrdy: ebi-nandrdy-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nrd_nandoe: ebi-nrd-nandoe-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwait: ebi-nwait-0 {
+						atmel,pins =
+							<AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwe_nandwe: ebi-nwe-nandwe-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_i2c0_gpio: i2c0-gpio {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* TWD1, conflicts with UART0 RX and DIBP */
+							 AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* TWCK1, conflicts with UART0 TX and DIBN */
+					};
+
+					pinctrl_i2c1_gpio: i2c1-gpio {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* TWD2, conflicts with RD0 and PWML1 */
+							 AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
+					};
+
+					pinctrl_i2c2_gpio: i2c2-gpio {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D0 */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D1 */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D2 */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D3 */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D4 */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D5 */
+							 AT91_PIOC 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D6 */
+							 AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D7 */
+							 AT91_PIOB  1 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_PCK, conflict with G0_RXCK */
+							 AT91_PIOB  3 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_VSYNC */
+							 AT91_PIOB  4 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_HSYNC */
+					};
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_D8, conflicts with SPI0_MISO, PWMH2 */
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_D9, conflicts with SPI0_MOSI, PWML2 */
+					};
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_D10, conflicts with SPI0_SPCK, PWMH3 */
+							 AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */
+					};
+				};
+
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+					pinctrl_lcd_rgb777: lcd-rgb-3 {
+						atmel,pins =
+							 /* LCDDAT0 conflicts with TMS */
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 /* LCDDAT8 conflicts with TCK */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 /* LCDDAT16 conflicts with NTRST */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+					pinctrl_lcd_rgb888: lcd-rgb-4 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX0 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX1 */
+							 AT91_PIOB  8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX0 */
+							 AT91_PIOB  9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX1 */
+							 AT91_PIOB  6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXDV */
+							 AT91_PIOB  7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXER */
+							 AT91_PIOB  2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXEN */
+							 AT91_PIOB  0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXCK */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDIO */
+							>;
+					};
+				};
+
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX0 */
+							 AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX1 */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX0 */
+							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX1 */
+							 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXDV */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXER */
+							 AT91_PIOA  4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXEN */
+							 AT91_PIOA  2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXCK */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDC */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDIO */
+							>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* MCI0_CK, conflict with PCK1(ISI_MCK) */
+							 AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_CDA, conflict with NAND_D0 */
+							 AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA0, conflict with NAND_D1 */
+							>;
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA1, conflict with NAND_D2 */
+							 AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA2, conflict with NAND_D3 */
+							 AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA3, conflict with NAND_D4 */
+							>;
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA4, conflict with NAND_D5 */
+							 AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA5, conflict with NAND_D6 */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA6, conflict with NAND_D7 */
+							 AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA7, conflict with NAND_OE */
+							>;
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_C AT91_PINCTRL_NONE		/* MCI1_CK */
+							 AT91_PIOE 19 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_CDA */
+							 AT91_PIOE 20 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA0 */
+							>;
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA1 */
+							 AT91_PIOE 22 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA2 */
+							 AT91_PIOE 23 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA3 */
+							>;
+					};
+				};
+
+				nand0 {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A Read Enable */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A Write Enable */
+
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC17 ALE */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC18 CLE */
+
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC15 NCS3/Chip Enable */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC16 NANDRDY */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 Data bit 0 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 Data bit 1 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 Data bit 2 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 Data bit 3 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 Data bit 4 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 Data bit 5 */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A Data bit 6 */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC12 periph A Data bit 7 */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MISO */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MOSI */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_SPCK */
+							>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TK0 */
+							 AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TF0 */
+							 AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* TD0 */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RK0 */
+							 AT91_PIOB 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RF0 */
+							 AT91_PIOB 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* RD0 */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TK1 */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TF1 */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* TD1 */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RK1 */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RF1 */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* RD1 */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MISO */
+							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MOSI */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_SPCK */
+							>;
+					};
+				};
+
+				spi2 {
+					pinctrl_spi2: spi2-0 {
+						atmel,pins =
+							<AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MISO conflicts with RTS0 */
+							 AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MOSI conflicts with TXD0 */
+							 AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_SPCK conflicts with RTS1 */
+							>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP		/* RXD - conflicts with G0_CRS, ISI_HSYNC */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD - conflicts with G0_COL, PCK2 */
+							>;
+					};
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_RX3, PWMH1 */
+					};
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_TXER, ISI_VSYNC */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+				};
+
+				usart4 {
+					pinctrl_usart4: usart4-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+					pinctrl_usart4_rts: usart4_rts-0 {
+						atmel,pins = <AT91_PIOE 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with NWAIT, A19 */
+					};
+					pinctrl_usart4_cts: usart4_cts-0 {
+						atmel,pins = <AT91_PIOE 0 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with A0/NBS0, MCI0_CDB */
+					};
+				};
+			};
+
+			aic: interrupt-controller@fc06e000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d4-aic";
+				interrupt-controller;
+				reg = <0xfc06e000 0x200>;
+				atmel,external-irqs = <56>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama7g5-pinfunc.h b/arch/arm/boot/dts/microchip/sama7g5-pinfunc.h
new file mode 100644
index 0000000000000..a67a156e26abd
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama7g5-pinfunc.h
@@ -0,0 +1,923 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__FLEXCOM0_IO0		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__CANTX3			PINMUX_PIN(PIN_PA0, 3, 1)
+#define PIN_PA0__PWML0			PINMUX_PIN(PIN_PA0, 5, 2)
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__FLEXCOM0_IO1		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__CANRX3			PINMUX_PIN(PIN_PA1, 3, 1)
+#define PIN_PA1__D14			PINMUX_PIN(PIN_PA1, 4, 1)
+#define PIN_PA1__PWMH0			PINMUX_PIN(PIN_PA1, 5, 3)
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_RSTN		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__FLEXCOM0_IO2		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__PDMC1_CLK		PINMUX_PIN(PIN_PA2, 3, 1)
+#define PIN_PA2__D15			PINMUX_PIN(PIN_PA2, 4, 1)
+#define PIN_PA2__PWMH1			PINMUX_PIN(PIN_PA2, 5, 3)
+#define PIN_PA2__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA2, 6, 3)
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT0		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__FLEXCOM0_IO3		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__PDMC1_DS0		PINMUX_PIN(PIN_PA3, 3, 1)
+#define PIN_PA3__NWR1_NBS1		PINMUX_PIN(PIN_PA3, 4, 1)
+#define PIN_PA3__PWML3			PINMUX_PIN(PIN_PA3, 5, 3)
+#define PIN_PA3__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA3, 6, 3)
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT1		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__FLEXCOM0_IO4		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__PDMC1_DS1		PINMUX_PIN(PIN_PA4, 3, 1)
+#define PIN_PA4__NCS2			PINMUX_PIN(PIN_PA4, 4, 1)
+#define PIN_PA4__PWMH3			PINMUX_PIN(PIN_PA4, 5, 3)
+#define PIN_PA4__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA4, 6, 3)
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT2		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__CANTX2			PINMUX_PIN(PIN_PA5, 3, 1)
+#define PIN_PA5__A23			PINMUX_PIN(PIN_PA5, 4, 1)
+#define PIN_PA5__PWMEXTRG0		PINMUX_PIN(PIN_PA5, 5, 3)
+#define PIN_PA5__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA5, 6, 3)
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT3		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__CANRX2			PINMUX_PIN(PIN_PA6, 3, 1)
+#define PIN_PA6__A24			PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__PWMEXTRG1		PINMUX_PIN(PIN_PA6, 5, 3)
+#define PIN_PA6__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA6, 6, 3)
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT4		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__CANTX1			PINMUX_PIN(PIN_PA7, 3, 1)
+#define PIN_PA7__NWAIT			PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__PWMFI0			PINMUX_PIN(PIN_PA7, 5, 3)
+#define PIN_PA7__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA7, 6, 3)
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT5		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__CANRX1			PINMUX_PIN(PIN_PA8, 3, 1)
+#define PIN_PA8__NCS0			PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__PWMIF1			PINMUX_PIN(PIN_PA8, 5, 3)
+#define PIN_PA8__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA8, 6, 3)
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT6		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__CANTX0			PINMUX_PIN(PIN_PA9, 3, 1)
+#define PIN_PA9__SMCK			PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__SPDIF_RX		PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA9, 6, 3)
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_DAT7		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__CANRX0		PINMUX_PIN(PIN_PA10, 3, 1)
+#define PIN_PA10__NCS1			PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__SPDIF_TX		PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA10, 6, 3)
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_DS		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__FLEXCOM2_IO4		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__A0_NBS0		PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__TIOA0			PINMUX_PIN(PIN_PA11, 5, 1)
+#define PIN_PA11__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA11, 6, 3)
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP		PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__FLEXCOM1_IO3		PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__FLEXCOM3_IO5		PINMUX_PIN(PIN_PA12, 4, 1)
+#define PIN_PA12__PWML2			PINMUX_PIN(PIN_PA12, 5, 3)
+#define PIN_PA12__FLEXCOM6_IO0		PINMUX_PIN(PIN_PA12, 6, 3)
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_1V8SEL		PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM1_IO2		PINMUX_PIN(PIN_PA13, 2, 1)
+#define PIN_PA13__FLEXCOM3_IO6		PINMUX_PIN(PIN_PA13, 4, 1)
+#define PIN_PA13__PWMH2			PINMUX_PIN(PIN_PA13, 5, 3)
+#define PIN_PA13__FLEXCOM6_IO1		PINMUX_PIN(PIN_PA13, 6, 3)
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SDMMC0_CD		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__FLEXCOM1_IO4		PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__A25			PINMUX_PIN(PIN_PA14, 4, 1)
+#define PIN_PA14__PWML1			PINMUX_PIN(PIN_PA14, 5, 3)
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__G0_TXEN		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__ISC_MCK		PINMUX_PIN(PIN_PA15, 3, 1)
+#define PIN_PA15__A1			PINMUX_PIN(PIN_PA15, 4, 1)
+#define PIN_PA15__TIOB0			PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__G0_TX0		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__ISC_D0		PINMUX_PIN(PIN_PA16, 3, 1)
+#define PIN_PA16__A2			PINMUX_PIN(PIN_PA16, 4, 1)
+#define PIN_PA16__TCLK0			PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__G0_TX1		PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__ISC_D1		PINMUX_PIN(PIN_PA17, 3, 1)
+#define PIN_PA17__A3			PINMUX_PIN(PIN_PA17, 4, 1)
+#define PIN_PA17__TIOA1			PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__G0_RXDV		PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__ISC_D2		PINMUX_PIN(PIN_PA18, 3, 1)
+#define PIN_PA18__A4			PINMUX_PIN(PIN_PA18, 4, 1)
+#define PIN_PA18__TIOB1			PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__G0_RX0		PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__ISC_D3		PINMUX_PIN(PIN_PA19, 3, 1)
+#define PIN_PA19__A5			PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__TCLK1			PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__G0_RX1		PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA20, 2, 1)
+#define PIN_PA20__ISC_D4		PINMUX_PIN(PIN_PA20, 3, 1)
+#define PIN_PA20__A6			PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__TIOA2			PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__G0_RXER		PINMUX_PIN(PIN_PA21, 1, 1)
+#define PIN_PA21__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA21, 2, 1)
+#define PIN_PA21__ISC_D5		PINMUX_PIN(PIN_PA21, 3, 1)
+#define PIN_PA21__A7			PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__TIOB2			PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__G0_MDC		PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__FLEXCOM4_IO2		PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__ISC_D6		PINMUX_PIN(PIN_PA22, 3, 1)
+#define PIN_PA22__A8			PINMUX_PIN(PIN_PA22, 4, 1)
+#define PIN_PA22__TCLK2			PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__G0_MDIO		PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__FLEXCOM4_IO3		PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__ISC_D7		PINMUX_PIN(PIN_PA23, 3, 1)
+#define PIN_PA23__A9			PINMUX_PIN(PIN_PA23, 4, 1)
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__G0_TXCK		PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__FLEXCOM4_IO4		PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__ISC_HSYNC		PINMUX_PIN(PIN_PA24, 3, 1)
+#define PIN_PA24__A10			PINMUX_PIN(PIN_PA24, 4, 1)
+#define PIN_PA24__FLEXCOM0_IO5		PINMUX_PIN(PIN_PA24, 5, 1)
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__G0_125CK		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__FLEXCOM5_IO4		PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__ISC_VSYNC		PINMUX_PIN(PIN_PA25, 3, 1)
+#define PIN_PA25__A11			PINMUX_PIN(PIN_PA25, 4, 1)
+#define PIN_PA25__FLEXCOM0_IO6		PINMUX_PIN(PIN_PA25, 5, 1)
+#define PIN_PA25__FLEXCOM7_IO0		PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__G0_TX2		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__FLEXCOM5_IO2		PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__ISC_FIELD		PINMUX_PIN(PIN_PA26, 3, 1)
+#define PIN_PA26__A12			PINMUX_PIN(PIN_PA26, 4, 1)
+#define PIN_PA26__TF0			PINMUX_PIN(PIN_PA26, 5, 1)
+#define PIN_PA26__FLEXCOM7_IO1		PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__G0_TX3		PINMUX_PIN(PIN_PA27, 1, 1)
+#define PIN_PA27__FLEXCOM5_IO3		PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__ISC_PCK		PINMUX_PIN(PIN_PA27, 3, 1)
+#define PIN_PA27__A13			PINMUX_PIN(PIN_PA27, 4, 1)
+#define PIN_PA27__TK0			PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__FLEXCOM8_IO0		PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__G0_RX2		PINMUX_PIN(PIN_PA28, 1, 1)
+#define PIN_PA28__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__ISC_D8		PINMUX_PIN(PIN_PA28, 3, 1)
+#define PIN_PA28__A14			PINMUX_PIN(PIN_PA28, 4, 1)
+#define PIN_PA28__RD0			PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__FLEXCOM8_IO1		PINMUX_PIN(PIN_PA28, 6, 3)
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__G0_RX3		PINMUX_PIN(PIN_PA29, 1, 1)
+#define PIN_PA29__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__ISC_D9		PINMUX_PIN(PIN_PA29, 3, 1)
+#define PIN_PA29__A15			PINMUX_PIN(PIN_PA29, 4, 1)
+#define PIN_PA29__RF0			PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__FLEXCOM9_IO0		PINMUX_PIN(PIN_PA29, 6, 3)
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__G0_RXCK		PINMUX_PIN(PIN_PA30, 1, 1)
+#define PIN_PA30__FLEXCOM6_IO4		PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__ISC_D10		PINMUX_PIN(PIN_PA30, 3, 1)
+#define PIN_PA30__A16			PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__RK0			PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__FLEXCOM9_IO1		PINMUX_PIN(PIN_PA30, 6, 3)
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__G0_TXER		PINMUX_PIN(PIN_PA31, 1, 1)
+#define PIN_PA31__FLEXCOM6_IO2		PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__ISC_D11		PINMUX_PIN(PIN_PA31, 3, 1)
+#define PIN_PA31__A17			PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__TD0			PINMUX_PIN(PIN_PA31, 5, 1)
+#define PIN_PA31__FLEXCOM10_IO0		PINMUX_PIN(PIN_PA31, 6, 3)
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__G0_COL			PINMUX_PIN(PIN_PB0, 1, 1)
+#define PIN_PB0__FLEXCOM6_IO3		PINMUX_PIN(PIN_PB0, 2, 2)
+#define PIN_PB0__EXT_IRQ0		PINMUX_PIN(PIN_PB0, 3, 1)
+#define PIN_PB0__A18			PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB0__SPDIF_RX		PINMUX_PIN(PIN_PB0, 5, 2)
+#define PIN_PB0__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB0, 6, 3)
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__G0_CRS			PINMUX_PIN(PIN_PB1, 1, 1)
+#define PIN_PB1__FLEXCOM6_IO1		PINMUX_PIN(PIN_PB1, 2, 2)
+#define PIN_PB1__EXT_IRQ1		PINMUX_PIN(PIN_PB1, 3, 1)
+#define PIN_PB1__A19			PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__SPDIF_TX		PINMUX_PIN(PIN_PB1, 5, 2)
+#define PIN_PB1__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB1, 6, 3)
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__G0_TSUCOMP		PINMUX_PIN(PIN_PB2, 1, 1)
+#define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
+#define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__PCK2			PINMUX_PIN(PIN_PB3, 3, 2)
+#define PIN_PB3__D8			PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__TF1			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__PCK3			PINMUX_PIN(PIN_PB4, 3, 2)
+#define PIN_PB4__D9			PINMUX_PIN(PIN_PB4, 4, 1)
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TK1			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__FLEXCOM11_IO2		PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PCK4			PINMUX_PIN(PIN_PB5, 3, 2)
+#define PIN_PB5__D10			PINMUX_PIN(PIN_PB5, 4, 1)
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__RK1			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__FLEXCOM11_IO3		PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PCK5			PINMUX_PIN(PIN_PB6, 3, 2)
+#define PIN_PB6__D11			PINMUX_PIN(PIN_PB6, 4, 1)
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TD1			PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__FLEXCOM11_IO4		PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__FLEXCOM3_IO5		PINMUX_PIN(PIN_PB7, 3, 2)
+#define PIN_PB7__D12			PINMUX_PIN(PIN_PB7, 4, 1)
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__RD1			PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__FLEXCOM3_IO6		PINMUX_PIN(PIN_PB8, 3, 2)
+#define PIN_PB8__D13			PINMUX_PIN(PIN_PB8, 4, 1)
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__QSPI0_IO3		PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PDMC0_CLK		PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__NCS3_NANDCS		PINMUX_PIN(PIN_PB9, 4, 1)
+#define PIN_PB9__PWML0			PINMUX_PIN(PIN_PB9, 5, 2)
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__QSPI0_IO2		PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__FLEXCOM8_IO2		PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PDMC0_DS0		PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PB10, 4, 1)
+#define PIN_PB10__PWMH0			PINMUX_PIN(PIN_PB10, 5, 2)
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__QSPI0_IO1		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__FLEXCOM8_IO3		PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__PDMC0_DS1		PINMUX_PIN(PIN_PB11, 3, 1)
+#define PIN_PB11__NRD_NANDOE		PINMUX_PIN(PIN_PB11, 4, 1)
+#define PIN_PB11__PWML1			PINMUX_PIN(PIN_PB11, 5, 2)
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__QSPI0_IO0		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__FLEXCOM8_IO4		PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__FLEXCOM6_IO5		PINMUX_PIN(PIN_PB12, 3, 1)
+#define PIN_PB12__A21_NANDALE		PINMUX_PIN(PIN_PB12, 4, 1)
+#define PIN_PB12__PWMH1			PINMUX_PIN(PIN_PB12, 5, 2)
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__QSPI0_CS		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__FLEXCOM9_IO0		PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__FLEXCOM6_IO6		PINMUX_PIN(PIN_PB13, 3, 1)
+#define PIN_PB13__A22_NANDCLE		PINMUX_PIN(PIN_PB13, 4, 1)
+#define PIN_PB13__PWML2			PINMUX_PIN(PIN_PB13, 5, 2)
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__QSPI0_SCK		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__FLEXCOM9_IO1		PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__D0			PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__PWMH2			PINMUX_PIN(PIN_PB14, 5, 2)
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__QSPI0_SCKN		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__FLEXCOM9_IO2		PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__D1			PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__PWML3			PINMUX_PIN(PIN_PB15, 5, 2)
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__QSPI0_IO4		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__FLEXCOM9_IO3		PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__PCK0			PINMUX_PIN(PIN_PB16, 3, 1)
+#define PIN_PB16__D2			PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__PWMH3			PINMUX_PIN(PIN_PB16, 5, 2)
+#define PIN_PB16__EXT_IRQ0		PINMUX_PIN(PIN_PB16, 6, 2)
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__QSPI0_IO5		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__FLEXCOM9_IO4		PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__PCK1			PINMUX_PIN(PIN_PB17, 3, 1)
+#define PIN_PB17__D3			PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__PWMEXTRG0		PINMUX_PIN(PIN_PB17, 5, 2)
+#define PIN_PB17__EXT_IRQ1		PINMUX_PIN(PIN_PB17, 6, 2)
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__QSPI0_IO6		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__PCK2			PINMUX_PIN(PIN_PB18, 3, 1)
+#define PIN_PB18__D4			PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__PWMEXTRG1		PINMUX_PIN(PIN_PB18, 5, 2)
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__QSPI0_IO7		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__PCK3			PINMUX_PIN(PIN_PB19, 3, 1)
+#define PIN_PB19__D5			PINMUX_PIN(PIN_PB19, 4, 1)
+#define PIN_PB19__PWMFI0		PINMUX_PIN(PIN_PB19, 5, 2)
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__QSPI0_DQS		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__D6			PINMUX_PIN(PIN_PB20, 4, 1)
+#define PIN_PB20__PWMFI1		PINMUX_PIN(PIN_PB20, 5, 2)
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__QSPI0_INT		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__D7			PINMUX_PIN(PIN_PB21, 4, 1)
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__QSPI1_IO3		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__FLEXCOM9_IO6		PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__NANDRDY		PINMUX_PIN(PIN_PB22, 4, 1)
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__QSPI1_IO2		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__I2SMCC0_CK		PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__PCK4			PINMUX_PIN(PIN_PB23, 6, 1)
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__QSPI1_IO1		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__I2SMCC0_WS		PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__PCK5			PINMUX_PIN(PIN_PB24, 6, 1)
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__QSPI1_IO0		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__FLEXCOM7_IO2		PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__PCK6			PINMUX_PIN(PIN_PB25, 6, 1)
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__QSPI1_CS		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__FLEXCOM7_IO3		PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PWMEXTRG0		PINMUX_PIN(PIN_PB26, 5, 1)
+#define PIN_PB26__PCK7			PINMUX_PIN(PIN_PB26, 6, 1)
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__QSPI1_SCK		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__FLEXCOM7_IO4		PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__I2SMCC0_MCK		PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PWMEXTRG1		PINMUX_PIN(PIN_PB27, 5, 1)
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__SDMMC1_RSTN		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__ADTRG			PINMUX_PIN(PIN_PB28, 2, 2)
+#define PIN_PB28__PWMFI0		PINMUX_PIN(PIN_PB28, 5, 1)
+#define PIN_PB28__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB28, 6, 4)
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__SDMMC1_CMD		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__FLEXCOM3_IO2		PINMUX_PIN(PIN_PB29, 2, 2)
+#define PIN_PB29__FLEXCOM0_IO5		PINMUX_PIN(PIN_PB29, 3, 2)
+#define PIN_PB29__TIOA3			PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__PWMFI1		PINMUX_PIN(PIN_PB29, 5, 1)
+#define PIN_PB29__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB29, 6, 4)
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__SDMMC1_CK		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__FLEXCOM3_IO3		PINMUX_PIN(PIN_PB30, 2, 2)
+#define PIN_PB30__FLEXCOM0_IO6		PINMUX_PIN(PIN_PB30, 3, 2)
+#define PIN_PB30__TIOB3			PINMUX_PIN(PIN_PB30, 4, 1)
+#define PIN_PB30__PWMH0			PINMUX_PIN(PIN_PB30, 5, 1)
+#define PIN_PB30__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB30, 6, 4)
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__SDMMC1_DAT0		PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__FLEXCOM3_IO4		PINMUX_PIN(PIN_PB31, 2, 2)
+#define PIN_PB31__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB31, 3, 2)
+#define PIN_PB31__TCLK3			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__PWML0			PINMUX_PIN(PIN_PB31, 5, 1)
+#define PIN_PB31__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB31, 6, 4)
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__SDMMC1_DAT1		PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC0, 2, 2)
+#define PIN_PC0__TIOA4			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__PWML1			PINMUX_PIN(PIN_PC0, 5, 1)
+#define PIN_PC0__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC0, 6, 4)
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__SDMMC1_DAT2		PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC1, 2, 2)
+#define PIN_PC1__TIOB4			PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__PWMH1			PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC1, 6, 4)
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__SDMMC1_DAT3		PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC2, 2, 2)
+#define PIN_PC2__TCLK4			PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__PWML2			PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC2, 6, 4)
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__SDMMC1_WP		PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__FLEXCOM4_IO1		PINMUX_PIN(PIN_PC3, 2, 2)
+#define PIN_PC3__TIOA5			PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__PWMH2			PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC3, 6, 4)
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__SDMMC1_CD		PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__FLEXCOM4_IO2		PINMUX_PIN(PIN_PC4, 2, 2)
+#define PIN_PC4__FLEXCOM9_IO6		PINMUX_PIN(PIN_PC4, 3, 2)
+#define PIN_PC4__TIOB5			PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__PWML3			PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__FLEXCOM11_IO0		PINMUX_PIN(PIN_PC4, 6, 4)
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__SDMMC1_1V8SEL		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__FLEXCOM4_IO3		PINMUX_PIN(PIN_PC5, 2, 2)
+#define PIN_PC5__FLEXCOM6_IO5		PINMUX_PIN(PIN_PC5, 3, 2)
+#define PIN_PC5__TCLK5			PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__PWMH3			PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__FLEXCOM11_IO1		PINMUX_PIN(PIN_PC5, 6, 4)
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__FLEXCOM4_IO4		PINMUX_PIN(PIN_PC6, 2, 2)
+#define PIN_PC6__FLEXCOM6_IO6		PINMUX_PIN(PIN_PC6, 3, 2)
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__I2SMCC0_DIN0		PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC7, 2, 2)
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__I2SMCC0_DIN1		PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC8, 2, 2)
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PC9, 1, 1)
+#define PIN_PC9__FLEXCOM7_IO2		PINMUX_PIN(PIN_PC9, 2, 2)
+#define PIN_PC9__FLEXCOM1_IO0		PINMUX_PIN(PIN_PC9, 6, 4)
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PC10, 1, 1)
+#define PIN_PC10__FLEXCOM7_IO3		PINMUX_PIN(PIN_PC10, 2, 2)
+#define PIN_PC10__FLEXCOM1_IO1		PINMUX_PIN(PIN_PC10, 6, 4)
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__I2SMCC1_CK		PINMUX_PIN(PIN_PC11, 1, 1)
+#define PIN_PC11__FLEXCOM7_IO4		PINMUX_PIN(PIN_PC11, 2, 2)
+#define PIN_PC11__FLEXCOM2_IO0		PINMUX_PIN(PIN_PC11, 6, 4)
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__I2SMCC1_WS		PINMUX_PIN(PIN_PC12, 1, 1)
+#define PIN_PC12__FLEXCOM8_IO2		PINMUX_PIN(PIN_PC12, 2, 2)
+#define PIN_PC12__FLEXCOM2_IO1		PINMUX_PIN(PIN_PC12, 6, 4)
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__I2SMCC1_MCK		PINMUX_PIN(PIN_PC13, 1, 1)
+#define PIN_PC13__FLEXCOM8_IO1		PINMUX_PIN(PIN_PC13, 2, 2)
+#define PIN_PC13__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC13, 6, 4)
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PC14, 1, 1)
+#define PIN_PC14__FLEXCOM8_IO0		PINMUX_PIN(PIN_PC14, 2, 2)
+#define PIN_PC14__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC14, 6, 4)
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PC15, 1, 1)
+#define PIN_PC15__FLEXCOM8_IO3		PINMUX_PIN(PIN_PC15, 2, 2)
+#define PIN_PC15__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC15, 6, 4)
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PC16, 1, 1)
+#define PIN_PC16__FLEXCOM8_IO4		PINMUX_PIN(PIN_PC16, 2, 2)
+#define PIN_PC16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC16, 6, 4)
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PC17, 1, 1)
+#define PIN_PC17__EXT_IRQ0		PINMUX_PIN(PIN_PC17, 2, 3)
+#define PIN_PC17__FLEXCOM5_IO0		PINMUX_PIN(PIN_PC17, 6, 4)
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__I2SMCC1_DIN0		PINMUX_PIN(PIN_PC18, 1, 1)
+#define PIN_PC18__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC18, 2, 2)
+#define PIN_PC18__FLEXCOM5_IO1		PINMUX_PIN(PIN_PC18, 6, 4)
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__I2SMCC1_DIN1		PINMUX_PIN(PIN_PC19, 1, 1)
+#define PIN_PC19__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC19, 2, 2)
+#define PIN_PC19__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC19, 6, 4)
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__I2SMCC1_DIN2		PINMUX_PIN(PIN_PC20, 1, 1)
+#define PIN_PC20__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC20, 2, 2)
+#define PIN_PC20__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC20, 6, 4)
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__I2SMCC1_DIN3		PINMUX_PIN(PIN_PC21, 1, 1)
+#define PIN_PC21__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC21, 2, 2)
+#define PIN_PC21__D3			PINMUX_PIN(PIN_PC21, 4, 2)
+#define PIN_PC21__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC21, 6, 5)
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__I2SMCC0_DIN2		PINMUX_PIN(PIN_PC22, 1, 1)
+#define PIN_PC22__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC22, 2, 2)
+#define PIN_PC22__D4			PINMUX_PIN(PIN_PC22, 4, 2)
+#define PIN_PC22__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC22, 6, 5)
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__I2SMCC0_DIN3		PINMUX_PIN(PIN_PC23, 1, 1)
+#define PIN_PC23__FLEXCOM0_IO5		PINMUX_PIN(PIN_PC23, 2, 3)
+#define PIN_PC23__D5			PINMUX_PIN(PIN_PC23, 4, 2)
+#define PIN_PC23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC23, 6, 5)
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__FLEXCOM0_IO6		PINMUX_PIN(PIN_PC24, 2, 3)
+#define PIN_PC24__EXT_IRQ1		PINMUX_PIN(PIN_PC24, 3, 3)
+#define PIN_PC24__D6			PINMUX_PIN(PIN_PC24, 4, 2)
+#define PIN_PC24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC24, 6, 5)
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__NTRST			PINMUX_PIN(PIN_PC25, 1, 1)
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__TCK_SWCLK		PINMUX_PIN(PIN_PC26, 1, 1)
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__TMS_SWDIO		PINMUX_PIN(PIN_PC27, 1, 1)
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__TDI			PINMUX_PIN(PIN_PC28, 1, 1)
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__TDO			PINMUX_PIN(PIN_PC29, 1, 1)
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC30, 2, 2)
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC31, 2, 2)
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD0, 2, 2)
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD1, 2, 2)
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__SDMMC2_RSTN		PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__PCK0			PINMUX_PIN(PIN_PD2, 2, 2)
+#define PIN_PD2__CANTX4			PINMUX_PIN(PIN_PD2, 3, 1)
+#define PIN_PD2__D7			PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__TIOA0			PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__FLEXCOM8_IO0		PINMUX_PIN(PIN_PD2, 6, 5)
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__SDMMC2_CMD		PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__CANRX4			PINMUX_PIN(PIN_PD3, 3, 1)
+#define PIN_PD3__NANDRDY		PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__TIOB0			PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__FLEXCOM8_IO1		PINMUX_PIN(PIN_PD3, 6, 5)
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__SDMMC2_CK		PINMUX_PIN(PIN_PD4, 1, 1)
+#define PIN_PD4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD4, 2, 2)
+#define PIN_PD4__CANTX5			PINMUX_PIN(PIN_PD4, 3, 1)
+#define PIN_PD4__NCS3_NANDCS		PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__TCLK0			PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__FLEXCOM9_IO0		PINMUX_PIN(PIN_PD4, 6, 5)
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__SDMMC2_DAT0		PINMUX_PIN(PIN_PD5, 1, 1)
+#define PIN_PD5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PD5, 2, 2)
+#define PIN_PD5__CANRX5			PINMUX_PIN(PIN_PD5, 3, 1)
+#define PIN_PD5__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__TIOA1			PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__FLEXCOM9_IO1		PINMUX_PIN(PIN_PD5, 6, 5)
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__SDMMC2_DAT1		PINMUX_PIN(PIN_PD6, 1, 1)
+#define PIN_PD6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PD6, 2, 2)
+#define PIN_PD6__SPDIF_RX		PINMUX_PIN(PIN_PD6, 3, 3)
+#define PIN_PD6__NRD_NANDOE		PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__TIOB1			PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__FLEXCOM10_IO0		PINMUX_PIN(PIN_PD6, 6, 5)
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__SDMMC2_DAT2		PINMUX_PIN(PIN_PD7, 1, 1)
+#define PIN_PD7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__SPDIF_TX		PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__A21_NANDALE		PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__TCLK1			PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__FLEXCOM10_IO1		PINMUX_PIN(PIN_PD7, 6, 5)
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__SDMMC2_DAT3		PINMUX_PIN(PIN_PD8, 1, 1)
+#define PIN_PD8__I2SMCC0_DIN0		PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__A22_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__TIOA2			PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD8, 6, 5)
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__SDMMC2_WP		PINMUX_PIN(PIN_PD9, 1, 1)
+#define PIN_PD9__I2SMCC0_DIN1		PINMUX_PIN(PIN_PD9, 3, 2)
+#define PIN_PD9__D0			PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__TIOB2			PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD9__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD9, 6, 5)
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__SDMMC2_CD		PINMUX_PIN(PIN_PD10, 1, 1)
+#define PIN_PD10__PCK6			PINMUX_PIN(PIN_PD10, 2, 2)
+#define PIN_PD10__I2SMCC0_DIN2		PINMUX_PIN(PIN_PD10, 3, 2)
+#define PIN_PD10__D1			PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__TCLK2			PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD10__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD10, 6, 3)
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__SDMMC2_1V8SEL		PINMUX_PIN(PIN_PD11, 1, 1)
+#define PIN_PD11__PCK7			PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__I2SMCC0_DIN3		PINMUX_PIN(PIN_PD11, 3, 2)
+#define PIN_PD11__D2			PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__TIOA3			PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD11, 6, 3)
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__PCK1			PINMUX_PIN(PIN_PD12, 1, 2)
+#define PIN_PD12__FLEXCOM1_IO0		PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__CANTX0		PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__TIOB3			PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__I2SMCC0_CK		PINMUX_PIN(PIN_PD13, 1, 2)
+#define PIN_PD13__FLEXCOM1_IO1		PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__PWML0			PINMUX_PIN(PIN_PD13, 3, 4)
+#define PIN_PD13__CANRX0		PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__TCLK3			PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__I2SMCC0_MCK		PINMUX_PIN(PIN_PD14, 1, 2)
+#define PIN_PD14__FLEXCOM1_IO2		PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__PWMH0			PINMUX_PIN(PIN_PD14, 3, 4)
+#define PIN_PD14__CANTX1		PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__TIOA4			PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD14, 6, 5)
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__I2SMCC0_WS		PINMUX_PIN(PIN_PD15, 1, 2)
+#define PIN_PD15__FLEXCOM1_IO3		PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__PWML1			PINMUX_PIN(PIN_PD15, 3, 4)
+#define PIN_PD15__CANRX1		PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__TIOB4			PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD15, 6, 5)
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PD16, 1, 2)
+#define PIN_PD16__FLEXCOM1_IO4		PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__PWMH1			PINMUX_PIN(PIN_PD16, 3, 4)
+#define PIN_PD16__CANTX2		PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__TCLK4			PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__FLEXCOM3_IO0		PINMUX_PIN(PIN_PD16, 6, 5)
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PD17, 1, 2)
+#define PIN_PD17__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD17, 2, 2)
+#define PIN_PD17__PWML2			PINMUX_PIN(PIN_PD17, 3, 4)
+#define PIN_PD17__CANRX2		PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__TIOA5			PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__FLEXCOM3_IO1		PINMUX_PIN(PIN_PD17, 6, 5)
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PD18, 1, 2)
+#define PIN_PD18__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD18, 2, 2)
+#define PIN_PD18__PWMH2			PINMUX_PIN(PIN_PD18, 3, 4)
+#define PIN_PD18__CANTX3		PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__TIOB5			PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD18, 6, 5)
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PD19, 1, 2)
+#define PIN_PD19__FLEXCOM2_IO2		PINMUX_PIN(PIN_PD19, 2, 2)
+#define PIN_PD19__PWML3			PINMUX_PIN(PIN_PD19, 3, 4)
+#define PIN_PD19__CANRX3		PINMUX_PIN(PIN_PD19, 4, 2)
+#define PIN_PD19__TCLK5			PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD19, 6, 5)
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__PCK0			PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD20, 2, 2)
+#define PIN_PD20__PWMH3			PINMUX_PIN(PIN_PD20, 3, 4)
+#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 4, 2)
+#define PIN_PD20__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD20, 6, 5)
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__PCK1			PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__FLEXCOM2_IO4		PINMUX_PIN(PIN_PD21, 2, 2)
+#define PIN_PD21__CANRX4		PINMUX_PIN(PIN_PD21, 4, 2)
+#define PIN_PD21__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD21, 6, 5)
+#define PIN_PD21__G1_TXEN		PINMUX_PIN(PIN_PD21, 7, 1)
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__PDMC0_CLK		PINMUX_PIN(PIN_PD22, 1, 2)
+#define PIN_PD22__PWMEXTRG0		PINMUX_PIN(PIN_PD22, 3, 4)
+#define PIN_PD22__RD1			PINMUX_PIN(PIN_PD22, 4, 2)
+#define PIN_PD22__CANTX5		PINMUX_PIN(PIN_PD22, 6, 2)
+#define PIN_PD22__G1_TX0		PINMUX_PIN(PIN_PD22, 7, 1)
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__PDMC0_DS0		PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__PWMEXTRG1		PINMUX_PIN(PIN_PD23, 3, 4)
+#define PIN_PD23__RF1			PINMUX_PIN(PIN_PD23, 4, 2)
+#define PIN_PD23__ISC_MCK		PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__CANRX5		PINMUX_PIN(PIN_PD23, 6, 2)
+#define PIN_PD23__G1_TX1		PINMUX_PIN(PIN_PD23, 7, 1)
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__PDMC0_DS1		PINMUX_PIN(PIN_PD24, 1, 2)
+#define PIN_PD24__PWMFI0		PINMUX_PIN(PIN_PD24, 3, 4)
+#define PIN_PD24__RK1			PINMUX_PIN(PIN_PD24, 4, 2)
+#define PIN_PD24__ISC_D0		PINMUX_PIN(PIN_PD24, 5, 2)
+#define PIN_PD24__G1_RXDV		PINMUX_PIN(PIN_PD24, 7, 1)
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__PDMC1_CLK		PINMUX_PIN(PIN_PD25, 1, 2)
+#define PIN_PD25__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD25, 2, 2)
+#define PIN_PD25__PWMFI1		PINMUX_PIN(PIN_PD25, 3, 4)
+#define PIN_PD25__TD1			PINMUX_PIN(PIN_PD25, 4, 2)
+#define PIN_PD25__ISC_D1		PINMUX_PIN(PIN_PD25, 5, 2)
+#define PIN_PD25__G1_RX0		PINMUX_PIN(PIN_PD25, 7, 1)
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__PDMC1_DS0		PINMUX_PIN(PIN_PD26, 1, 2)
+#define PIN_PD26__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD26, 2, 2)
+#define PIN_PD26__ADTRG			PINMUX_PIN(PIN_PD26, 3, 3)
+#define PIN_PD26__TF1			PINMUX_PIN(PIN_PD26, 4, 2)
+#define PIN_PD26__ISC_D2		PINMUX_PIN(PIN_PD26, 5, 2)
+#define PIN_PD26__G1_RX1		PINMUX_PIN(PIN_PD26, 7, 1)
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__PDMC1_DS1		PINMUX_PIN(PIN_PD27, 1, 2)
+#define PIN_PD27__FLEXCOM5_IO2		PINMUX_PIN(PIN_PD27, 2, 2)
+#define PIN_PD27__TIOA0			PINMUX_PIN(PIN_PD27, 3, 3)
+#define PIN_PD27__TK1			PINMUX_PIN(PIN_PD27, 4, 2)
+#define PIN_PD27__ISC_D3		PINMUX_PIN(PIN_PD27, 5, 2)
+#define PIN_PD27__G1_RXER		PINMUX_PIN(PIN_PD27, 7, 1)
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__RD0			PINMUX_PIN(PIN_PD28, 1, 2)
+#define PIN_PD28__FLEXCOM5_IO3		PINMUX_PIN(PIN_PD28, 2, 2)
+#define PIN_PD28__TIOB0			PINMUX_PIN(PIN_PD28, 3, 3)
+#define PIN_PD28__I2SMCC1_CK		PINMUX_PIN(PIN_PD28, 4, 2)
+#define PIN_PD28__ISC_D4		PINMUX_PIN(PIN_PD28, 5, 2)
+#define PIN_PD28__PWML3			PINMUX_PIN(PIN_PD28, 6, 5)
+#define PIN_PD28__G1_MDC		PINMUX_PIN(PIN_PD28, 7, 1)
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__RF0			PINMUX_PIN(PIN_PD29, 1, 2)
+#define PIN_PD29__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD29, 2, 2)
+#define PIN_PD29__TCLK0			PINMUX_PIN(PIN_PD29, 3, 3)
+#define PIN_PD29__I2SMCC1_WS		PINMUX_PIN(PIN_PD29, 4, 2)
+#define PIN_PD29__ISC_D5		PINMUX_PIN(PIN_PD29, 5, 2)
+#define PIN_PD29__PWMH3			PINMUX_PIN(PIN_PD29, 6, 5)
+#define PIN_PD29__G1_MDIO		PINMUX_PIN(PIN_PD29, 7, 1)
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__RK0			PINMUX_PIN(PIN_PD30, 1, 2)
+#define PIN_PD30__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD30, 2, 2)
+#define PIN_PD30__TIOA1			PINMUX_PIN(PIN_PD30, 3, 3)
+#define PIN_PD30__I2SMCC1_MCK		PINMUX_PIN(PIN_PD30, 4, 2)
+#define PIN_PD30__ISC_D6		PINMUX_PIN(PIN_PD30, 5, 2)
+#define PIN_PD30__PWMEXTRG0		PINMUX_PIN(PIN_PD30, 6, 5)
+#define PIN_PD30__G1_TXCK		PINMUX_PIN(PIN_PD30, 7, 1)
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__TD0			PINMUX_PIN(PIN_PD31, 1, 2)
+#define PIN_PD31__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD31, 2, 2)
+#define PIN_PD31__TIOB1			PINMUX_PIN(PIN_PD31, 3, 3)
+#define PIN_PD31__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PD31, 4, 2)
+#define PIN_PD31__ISC_D7		PINMUX_PIN(PIN_PD31, 5, 2)
+#define PIN_PD31__PWM_EXTRG1		PINMUX_PIN(PIN_PD31, 6, 5)
+#define PIN_PD31__G1_TX2		PINMUX_PIN(PIN_PD31, 7, 1)
+#define PIN_PE0				128
+#define PIN_PE0__GPIO			PINMUX_PIN(PIN_PE0, 0, 0)
+#define PIN_PE0__TF0			PINMUX_PIN(PIN_PE0, 1, 2)
+#define PIN_PE0__FLEXCOM6_IO2		PINMUX_PIN(PIN_PE0, 2, 2)
+#define PIN_PE0__TCLK1			PINMUX_PIN(PIN_PE0, 3, 3)
+#define PIN_PE0__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PE0, 4, 2)
+#define PIN_PE0__ISC_HSYNC		PINMUX_PIN(PIN_PE0, 5, 2)
+#define PIN_PE0__PWMFI0			PINMUX_PIN(PIN_PE0, 6, 5)
+#define PIN_PE0__G1_TX3			PINMUX_PIN(PIN_PE0, 7, 1)
+#define PIN_PE1				129
+#define PIN_PE1__GPIO			PINMUX_PIN(PIN_PE1, 0, 0)
+#define PIN_PE1__TK0			PINMUX_PIN(PIN_PE1, 1, 2)
+#define PIN_PE1__FLEXCOM6_IO3		PINMUX_PIN(PIN_PE1, 2, 2)
+#define PIN_PE1__TIOA2			PINMUX_PIN(PIN_PE1, 3, 3)
+#define PIN_PE1__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PE1, 4, 2)
+#define PIN_PE1__ISC_VSYNC		PINMUX_PIN(PIN_PE1, 5, 2)
+#define PIN_PE1__PWMFI1			PINMUX_PIN(PIN_PE1, 6, 5)
+#define PIN_PE1__G1_RX2			PINMUX_PIN(PIN_PE1, 7, 1)
+#define PIN_PE2				130
+#define PIN_PE2__GPIO			PINMUX_PIN(PIN_PE2, 0, 0)
+#define PIN_PE2__PWML0			PINMUX_PIN(PIN_PE2, 1, 5)
+#define PIN_PE2__FLEXCOM6_IO4		PINMUX_PIN(PIN_PE2, 2, 2)
+#define PIN_PE2__TIOB2			PINMUX_PIN(PIN_PE2, 3, 3)
+#define PIN_PE2__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PE2, 4, 2)
+#define PIN_PE2__ISC_FIELD		PINMUX_PIN(PIN_PE2, 5, 2)
+#define PIN_PE2__G1_RX3			PINMUX_PIN(PIN_PE2, 7, 1)
+#define PIN_PE3				131
+#define PIN_PE3__GPIO			PINMUX_PIN(PIN_PE3, 0, 0)
+#define PIN_PE3__PWMH0			PINMUX_PIN(PIN_PE3, 1, 5)
+#define PIN_PE3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PE3, 2, 4)
+#define PIN_PE3__TCLK2			PINMUX_PIN(PIN_PE3, 3, 3)
+#define PIN_PE3__I2SMCC1_DIN0		PINMUX_PIN(PIN_PE3, 4, 2)
+#define PIN_PE3__ISC_PCK		PINMUX_PIN(PIN_PE3, 5, 2)
+#define PIN_PE3__G1_RXCK		PINMUX_PIN(PIN_PE3, 7, 1)
+#define PIN_PE4				132
+#define PIN_PE4__GPIO			PINMUX_PIN(PIN_PE4, 0, 0)
+#define PIN_PE4__PWML1			PINMUX_PIN(PIN_PE4, 1, 5)
+#define PIN_PE4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PE4, 2, 4)
+#define PIN_PE4__TIOA3			PINMUX_PIN(PIN_PE4, 3, 3)
+#define PIN_PE4__I2SMCC1_DIN1		PINMUX_PIN(PIN_PE4, 4, 2)
+#define PIN_PE4__ISC_D8			PINMUX_PIN(PIN_PE4, 5, 2)
+#define PIN_PE4__G1_TXER		PINMUX_PIN(PIN_PE4, 7, 1)
+#define PIN_PE5				133
+#define PIN_PE5__GPIO			PINMUX_PIN(PIN_PE5, 0, 0)
+#define PIN_PE5__PWMH1			PINMUX_PIN(PIN_PE5, 1, 5)
+#define PIN_PE5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PE5, 2, 4)
+#define PIN_PE5__TIOB3			PINMUX_PIN(PIN_PE5, 3, 3)
+#define PIN_PE5__I2SMCC1_DIN2		PINMUX_PIN(PIN_PE5, 4, 2)
+#define PIN_PE5__ISC_D9			PINMUX_PIN(PIN_PE5, 5, 2)
+#define PIN_PE5__G1_COL			PINMUX_PIN(PIN_PE5, 7, 1)
+#define PIN_PE6				134
+#define PIN_PE6__GPIO			PINMUX_PIN(PIN_PE6, 0, 0)
+#define PIN_PE6__PWML2			PINMUX_PIN(PIN_PE6, 1, 5)
+#define PIN_PE6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PE6, 2, 4)
+#define PIN_PE6__TCLK3			PINMUX_PIN(PIN_PE6, 3, 3)
+#define PIN_PE6__I2SMCC1_DIN3		PINMUX_PIN(PIN_PE6, 4, 2)
+#define PIN_PE6__ISC_D10		PINMUX_PIN(PIN_PE6, 5, 2)
+#define PIN_PE6__G1_CRS			PINMUX_PIN(PIN_PE6, 7, 1)
+#define PIN_PE7				135
+#define PIN_PE7__GPIO			PINMUX_PIN(PIN_PE7, 0, 0)
+#define PIN_PE7__PWMH2			PINMUX_PIN(PIN_PE7, 1, 5)
+#define PIN_PE7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PE7, 2, 4)
+#define PIN_PE7__TIOA4			PINMUX_PIN(PIN_PE7, 3, 3)
+#define PIN_PE7__ISC_D11		PINMUX_PIN(PIN_PE7, 5, 2)
+#define PIN_PE7__G1_TSUCOMP		PINMUX_PIN(PIN_PE7, 7, 1)
diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
new file mode 100644
index 0000000000000..9642a42d84e60
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -0,0 +1,1016 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
+ *
+ *  Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	model = "Microchip SAMA7G5 family SoC";
+	compatible = "microchip,sama7g5";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-90000000 {
+			opp-hz = /bits/ 64 <90000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+			opp-suspend;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1150000 1125000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-1000000002 {
+			opp-hz = /bits/ 64 <1000000002>;
+			opp-microvolt = <1250000 1225000 1300000>;
+			clock-latency-ns = <320000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&thermal_sensor>;
+
+			trips {
+				cpu_normal: cpu-alert0 {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_hot: cpu-alert1 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_normal>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		usb_clk: usb_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+		};
+	};
+
+	vddout25: fixed-regulator-vddout25 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDOUT25";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		status = "disabled";
+	};
+
+	ns_sram: sram@100000 {
+		compatible = "mmio-sram";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x100000 0x20000>;
+		ranges;
+	};
+
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc AT91_SAMA7G5_ADC_TEMP_CHANNEL>;
+		io-channel-names = "sensor-channel";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@600000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00600000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00600000 0x2400>;
+		};
+
+		nfc_io: nfc-io@10000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x10000000 0x8000000>;
+		};
+
+		ebi: ebi@40000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x40000000 0x20000000>;
+			ranges = <0x0 0x0 0x40000000 0x8000000
+				  0x1 0x0 0x48000000 0x8000000
+				  0x2 0x0 0x50000000 0x8000000
+				  0x3 0x0 0x58000000 0x8000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK1>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		securam: sram@e0000000 {
+			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
+			reg = <0xe0000000 0x4000>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xe0000000 0x4000>;
+			no-memory-wc;
+		};
+
+		secumod: secumod@e0004000 {
+			compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
+			reg = <0xe0004000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		sfrbu: sfr@e0008000 {
+			compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+			reg = <0xe0008000 0x20>;
+		};
+
+		pioA: pinctrl@e0014000 {
+			compatible = "microchip,sama7g5-pinctrl";
+			reg = <0xe0014000 0x800>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+		};
+
+		pmc: clock-controller@e0018000 {
+			compatible = "microchip,sama7g5-pmc", "syscon";
+			reg = <0xe0018000 0x200>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		reset_controller: reset-controller@e001d000 {
+			compatible = "microchip,sama7g5-rstc";
+			reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clk32k 0>;
+		};
+
+		shdwc: poweroff@e001d010 {
+			compatible = "microchip,sama7g5-shdwc", "syscon";
+			reg = <0xe001d010 0x10>;
+			clocks = <&clk32k 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtc@e001d020 {
+			compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xe001d020 0x30>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		clk32k: clock-controller@e001d050 {
+			compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
+			reg = <0xe001d050 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: gpbr@e001d060 {
+			compatible = "microchip,sama7g5-gpbr", "syscon";
+			reg = <0xe001d060 0x48>;
+		};
+
+		rtc: rtc@e001d0a8 {
+			compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc";
+			reg = <0xe001d0a8 0x30>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 1>;
+		};
+
+		ps_wdt: watchdog@e001d180 {
+			compatible = "microchip,sama7g5-wdt";
+			reg = <0xe001d180 0x24>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		chipid@e0020000 {
+			compatible = "microchip,sama7g5-chipid";
+			reg = <0xe0020000 0x8>;
+		};
+
+		tcb1: timer@e0800000 {
+			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe0800000 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>;
+			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+		};
+
+		hsmc: hsmc@e0808000 {
+			compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+			reg = <0xe0808000 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pmecc: ecc-engine@e0808070 {
+				compatible = "atmel,sama5d2-pmecc";
+				reg = <0xe0808070 0x490>,
+				      <0xe0808500 0x200>;
+			};
+		};
+
+		qspi0: spi@e080c000 {
+			compatible = "microchip,sama7g5-ospi";
+			reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(41)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(40)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>;
+			clock-names = "pclk", "gclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi1: spi@e0810000 {
+			compatible = "microchip,sama7g5-qspi";
+			reg = <0xe0810000 0x400>, <0x30000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(43)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(42)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>;
+			clock-names = "pclk", "gclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e0828000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0828000 0x100>, <0x100000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e082c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can2: can@e0830000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0830000 0x100>, <0x100000 0x10000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 63>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can3: can@e0834000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0834000 0x100>, <0x110000 0x4400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 64>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can4: can@e0838000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0838000 0x100>, <0x110000 0x8800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 65>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can5: can@e083c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 66>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		adc: adc@e1000000 {
+			compatible = "microchip,sama7g5-adc";
+			reg = <0xe1000000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			clock-names = "adc_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>;
+			dma-names = "rx";
+			atmel,min-sample-rate-hz = <200000>;
+			atmel,max-sample-rate-hz = <20000000>;
+			atmel,startup-time-ms = <4>;
+			#io-channel-cells = <1>;
+			nvmem-cells = <&temperature_calib>;
+			nvmem-cell-names = "temperature_calib";
+			status = "disabled";
+		};
+
+		sdmmc0: mmc@e1204000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1204000 0x4000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@e1208000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1208000 0x4000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc2: mmc@e120c000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe120c000 0x4000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		csi2dc: csi2dc@e1404000 {
+			compatible = "microchip,sama7g5-csi2dc";
+			reg = <0xe1404000 0x500>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&xisc>;
+			clock-names = "pclk", "scck";
+			assigned-clocks = <&xisc>;
+			assigned-clock-rates = <266000000>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					csi2dc_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					csi2dc_out: endpoint {
+						bus-width = <14>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+						remote-endpoint = <&xisc_in>;
+					};
+				};
+			};
+		};
+
+		xisc: xisc@e1408000 {
+			compatible = "microchip,sama7g5-isc";
+			reg = <0xe1408000 0x2000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+			clock-names = "hclock";
+			#clock-cells = <0>;
+			clock-output-names = "isc-mck";
+			status = "disabled";
+
+			port {
+				xisc_in: endpoint {
+					bus-type = <5>; /* Parallel */
+					bus-width = <14>;
+					hsync-active = <1>;
+					vsync-active = <1>;
+					remote-endpoint = <&csi2dc_out>;
+				};
+			};
+		};
+
+		pwm: pwm@e1604000 {
+			compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
+			reg = <0xe1604000 0x4000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#pwm-cells = <3>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
+			status = "disabled";
+		};
+
+		pdmc0: sound@e1608000 {
+			compatible = "microchip,sama7g5-pdmc";
+			reg = <0xe1608000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			#sound-dai-cells = <0>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		pdmc1: sound@e160c000 {
+			compatible = "microchip,sama7g5-pdmc";
+			reg = <0xe160c000 0x1000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			#sound-dai-cells = <0>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		spdifrx: spdifrx@e1614000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdifrx";
+			reg = <0xe1614000 0x4000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		spdiftx: spdiftx@e1618000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdiftx";
+			reg = <0xe1618000 0x4000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
+			dma-names = "tx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
+			clock-names = "pclk", "gclk";
+		};
+
+		i2s0: i2s@e161c000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe161c000 0x4000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		i2s1: i2s@e1620000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe1620000 0x4000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		eic: interrupt-controller@e1628000 {
+			compatible = "microchip,sama7g5-eic";
+			reg = <0xe1628000 0xec>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
+		pit64b0: timer@e1800000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1800000 0x4000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pit64b1: timer@e1804000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1804000 0x4000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
+			clock-names = "pclk", "gclk";
+		};
+
+		aes: crypto@e1810000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe1810000 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+			clock-names = "aes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+			dma-names = "tx", "rx";
+		};
+
+		sha: crypto@e1814000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe1814000 0x100>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+			clock-names = "sha_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+			dma-names = "tx";
+		};
+
+		flx0: flexcom@e1818000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe1818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1818000 0x800>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+					<&dma1 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e181c000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe181c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe181c000 0x800>;
+			status = "disabled";
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+					<&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e1824000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe1824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1824000 0x800>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
+					<&dma1 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		trng: rng@e2010000 {
+			compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
+			reg = <0xe2010000 0x100>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
+			status = "disabled";
+		};
+
+		tdes: crypto@e2014000 {
+			compatible = "atmel,at91sam9g46-tdes";
+			reg = <0xe2014000 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
+			dma-names = "tx", "rx";
+		};
+
+		flx4: flexcom@e2018000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2018000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2018000 0x800>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+					<&dma1 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@e2024000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2024000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2024000 0x800>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+					<&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		gmac0: ethernet@e2800000 {
+			compatible = "microchip,sama7g5-gem";
+			reg = <0xe2800000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
+			assigned-clock-rates = <125000000>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@e2804000 {
+			compatible = "microchip,sama7g5-emac";
+			reg = <0xe2804000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		dma0: dma-controller@e2808000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe2808000 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		dma1: dma-controller@e280c000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe280c000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		/* Place dma2 here despite it's address */
+		dma2: dma-controller@e1200000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe1200000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+			clock-names = "dma_clk";
+			dma-requests = <0>;
+			status = "disabled";
+		};
+
+		tcb0: timer@e2814000 {
+			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe2814000 0x100>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>;
+			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+		};
+
+		flx8: flexcom@e2818000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2818000 0x800>;
+			status = "disabled";
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+					<&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx9: flexcom@e281c000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe281c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe281c000 0x800>;
+			status = "disabled";
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+					<&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx11: flexcom@e2824000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2824000 0x800>;
+			status = "disabled";
+
+			spi11: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
+					    <&dma0 AT91_XDMAC_DT_PERID(27)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		uddrc: uddrc@e3800000 {
+			compatible = "microchip,sama7g5-uddrc";
+			reg = <0xe3800000 0x4000>;
+		};
+
+		ddr3phy: ddr3phy@e3804000 {
+			compatible = "microchip,sama7g5-ddr3phy";
+			reg = <0xe3804000 0x1000>;
+		};
+
+		otpc: efuse@e8c00000 {
+			compatible = "microchip,sama7g5-otpc", "syscon";
+			reg = <0xe8c00000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			temperature_calib: calib@1 {
+				reg = <OTP_PKT(1) 76>;
+			};
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0xe8c11000 0x1000>,
+				<0xe8c12000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/tny_a9260.dts b/arch/arm/boot/dts/microchip/tny_a9260.dts
new file mode 100644
index 0000000000000..ef6d586ce887d
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/tny_a9260.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include "tny_a9260_common.dtsi"
+
+/ {
+	model = "Calao TNY A9260";
+	compatible = "calao,tny-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi
new file mode 100644
index 0000000000000..70e5635c78edc
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+/ {
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock6 rw rootfstype=ubifs";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/tny_a9263.dts b/arch/arm/boot/dts/microchip/tny_a9263.dts
new file mode 100644
index 0000000000000..62b7d9f9a926c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/tny_a9263.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+	model = "Calao TNY A9263";
+	compatible = "atmel,tny-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		ebi0: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/tny_a9g20.dts b/arch/arm/boot/dts/microchip/tny_a9g20.dts
new file mode 100644
index 0000000000000..118d766a1265e
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/tny_a9g20.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include "tny_a9260_common.dtsi"
+
+/ {
+	model = "Calao TNY A9G20";
+	compatible = "calao,tny-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/microchip/usb_a9260.dts b/arch/arm/boot/dts/microchip/usb_a9260.dts
new file mode 100644
index 0000000000000..66f8da89007db
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9260.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9260.dts - Device Tree file for Caloa USB A9260 board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9260";
+	compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	ahb {
+		apb {
+			shdwc: poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
new file mode 100644
index 0000000000000..8744b5f6f7926
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a926x.dts - Device Tree file for Caloa USB A926x board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+/ {
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/usb_a9263.dts b/arch/arm/boot/dts/microchip/usb_a9263.dts
new file mode 100644
index 0000000000000..45745915b2e16
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9263.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+	model = "Calao USB A9263";
+	compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffa4000 {
+				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					reg = <0>;
+					spi-max-frequency = <15000000>;
+				};
+			};
+
+			poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+
+		ebi0: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@a00000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
new file mode 100644
index 0000000000000..08d58081201ad
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+/ {
+	ahb {
+		apb {
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+			};
+		};
+	};
+
+	i2c-gpio@0 {
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led1 {
+			label = "user_led1";
+			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
+		};
+
+/*
+* led already used by mother board but active as high
+*		user_led2 {
+*			label = "user_led2";
+*			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
+*		};
+*/
+		user_led3 {
+			label = "user_led3";
+			gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
+		};
+
+		user_led4 {
+			label = "user_led4";
+			gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
+		};
+
+		red {
+			label = "red";
+			gpios = <&pioB 24 GPIO_ACTIVE_LOW>;
+		};
+
+		orange {
+			label = "orange";
+			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb1 {
+			label = "user_pb1";
+			gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+		};
+
+		user_pb2 {
+			label = "user_pb2";
+			gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
+			linux,code = <0x101>;
+		};
+
+		user_pb3 {
+			label = "user_pb3";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+		};
+
+		user_pb4 {
+			label = "user_pb4";
+			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20.dts b/arch/arm/boot/dts/microchip/usb_a9g20.dts
new file mode 100644
index 0000000000000..2f667b083e814
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9g20.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ *
+ *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "usb_a9g20_common.dtsi"
+
+/ {
+	model = "Calao USB A9G20";
+	compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi
new file mode 100644
index 0000000000000..7d10b36db1eef
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ *
+ *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	i2c-gpio-0 {
+		rtc@56 {
+			compatible = "microcrystal,rv3029";
+			reg = <0x56>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
new file mode 100644
index 0000000000000..f65712015d40f
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20_lpw.dts - Device Tree file for Caloa USB A9G20 Low Power board
+ *
+ *  Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "usb_a9g20_common.dtsi"
+
+/ {
+	model = "Calao USB A9G20 Low Power";
+	compatible = "calao,usb-a9g20-lpw", "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			spi1: spi@fffcc000 {
+				cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+				mmc-slot@0 {
+					compatible = "mmc-spi-slot";
+					reg = <0>;
+					voltage-ranges = <3200 3400>;
+					spi-max-frequency = <25000000>;
+					interrupt-parent = <&pioC>;
+					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/milbeaut-m10v-evb.dts b/arch/arm/boot/dts/milbeaut-m10v-evb.dts
deleted file mode 100644
index 614f60c6b0a23..0000000000000
--- a/arch/arm/boot/dts/milbeaut-m10v-evb.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Socionext Milbeaut M10V Evaluation Board */
-/dts-v1/;
-#include "milbeaut-m10v.dtsi"
-
-/ {
-	model = "Socionext M10V EVB";
-	compatible = "socionext,milbeaut-m10v-evb", "socionext,sc2000a";
-
-	aliases {
-		serial0 = &uart1;
-	};
-
-	chosen {
-		bootargs = "rootwait earlycon";
-		stdout-path = "serial0:115200n8";
-	};
-
-	clocks {
-		uclk40xi: uclk40xi {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <40000000>;
-		};
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000  0x80000000>;
-	};
-
-};
diff --git a/arch/arm/boot/dts/milbeaut-m10v.dtsi b/arch/arm/boot/dts/milbeaut-m10v.dtsi
deleted file mode 100644
index 75f0c0af22705..0000000000000
--- a/arch/arm/boot/dts/milbeaut-m10v.dtsi
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	compatible = "socionext,sc2000a";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "socionext,milbeaut-m10v-smp";
-		cpu@f00 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf00>;
-		};
-		cpu@f01 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf01>;
-		};
-		cpu@f02 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf02>;
-		};
-		cpu@f03 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf03>;
-		};
-	};
-
-	timer { /* The Generic Timer */
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			<GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			<GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			<GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		clock-frequency = <40000000>;
-		always-on;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&gic>;
-
-		gic: interrupt-controller@1d000000 {
-			compatible = "arm,cortex-a7-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x1d001000 0x1000>,
-			      <0x1d002000 0x1000>; /* CPU I/f base and size */
-		};
-
-		clk: clock-ctrl@1d021000 {
-			compatible = "socionext,milbeaut-m10v-ccu";
-			#clock-cells = <1>;
-			reg = <0x1d021000 0x1000>;
-			clocks = <&uclk40xi>;
-		};
-
-		timer@1e000050 { /* 32-bit Reload Timers */
-			compatible = "socionext,milbeaut-timer";
-			reg = <0x1e000050 0x20>;
-			interrupts = <0 91 4>;
-			clocks = <&clk 4>;
-		};
-
-		uart1: serial@1e700010 { /* PE4, PE5 */
-			/* Enable this as ttyUSI0 */
-			compatible = "socionext,milbeaut-usio-uart";
-			reg = <0x1e700010 0x10>;
-			interrupts = <0 141 0x4>, <0 149 0x4>;
-			interrupt-names = "rx", "tx";
-			clocks = <&clk 2>;
-		};
-
-	};
-
-	sram@0 {
-		compatible = "mmio-sram";
-		reg = <0x0 0x10000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x0 0x10000>;
-		smp-sram@f100 {
-			compatible = "socionext,milbeaut-smp-sram";
-			reg = <0xf100 0x20>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
deleted file mode 100644
index 04f1ae1382e7a..0000000000000
--- a/arch/arm/boot/dts/mmp2-brownstone.dts
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- */
-
-/dts-v1/;
-#include "mmp2.dtsi"
-
-/ {
-	model = "Marvell MMP2 Brownstone Development Board";
-	compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
-
-	chosen {
-		bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&twsi1 {
-	status = "okay";
-	pmic: max8925@3c {
-		compatible = "maxium,max8925";
-		reg = <0x3c>;
-		interrupts = <1>;
-		interrupt-parent = <&intcmux4>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		maxim,tsc-irq = <0>;
-
-		regulators {
-			SDV1 {
-				regulator-min-microvolt = <637500>;
-				regulator-max-microvolt = <1425000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			SDV2 {
-				regulator-min-microvolt = <650000>;
-				regulator-max-microvolt = <2225000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			SDV3 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO1 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO2 {
-				regulator-min-microvolt = <650000>;
-				regulator-max-microvolt = <2250000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO3 {
-				regulator-min-microvolt = <650000>;
-				regulator-max-microvolt = <2250000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO4 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO5 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO6 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO7 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO8 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO9 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO10 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-			};
-			LDO11 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO12 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO13 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO14 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO15 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO16 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO17 {
-				regulator-min-microvolt = <650000>;
-				regulator-max-microvolt = <2250000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO18 {
-				regulator-min-microvolt = <650000>;
-				regulator-max-microvolt = <2250000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO19 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO20 {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-		backlight {
-			maxim,max8925-dual-string = <0>;
-		};
-		charger {
-			batt-detect = <0>;
-			topoff-threshold = <1>;
-			fast-charge = <7>;
-			no-temp-support = <0>;
-			no-insert-detect = <0>;
-		};
-	};
-};
-
-&rtc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
deleted file mode 100644
index 55ea87870af3e..0000000000000
--- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
+++ /dev/null
@@ -1,277 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * OLPC XO 1.75 Laptop.
- *
- * Copyright (C) 2018,2019,2020 Lubomir Rintel <lkundrak@v3.sk>
- */
-
-/dts-v1/;
-#include "mmp2.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/marvell,mmp2-audio.h>
-
-/ {
-	model = "OLPC XO-1.75";
-	compatible = "olpc,xo-1.75", "mrvl,mmp2";
-
-	chosen {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		framebuffer@1fc00000 {
-			compatible = "simple-framebuffer";
-			reg = <0x1fc00000 (1200 * 900 * 2)>;
-			width = <1200>;
-			height = <900>;
-			stride = <(1200 * 2)>;
-			format = "r5g6b5";
-			clocks = <&soc_clocks MMP2_CLK_DISP0_LCDC>,
-				 <&soc_clocks MMP2_CLK_DISP0>;
-		};
-	};
-
-	memory@0 {
-		available = <0xcf000 0x1ef31000 0x1000 0xbf000>;
-		reg = <0x0 0x20000000>;
-		device_type = "memory";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		lid {
-			label = "Lid";
-			gpios = <&gpio 129 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			wakeup-source;
-		};
-
-		tablet_mode {
-			label = "E-Book Mode";
-			gpios = <&gpio 128 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_TABLET_MODE>;
-			wakeup-source;
-		};
-	};
-
-	i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-gpio,timeout-ms = <1000>;
-		status = "okay";
-
-		camera@21 {
-			compatible = "ovti,ov7670";
-			reg = <0x21>;
-			reset-gpios = <&gpio 102 GPIO_ACTIVE_LOW>;
-			powerdown-gpios = <&gpio 150 GPIO_ACTIVE_LOW>;
-			clocks = <&camera0>;
-			clock-names = "xclk";
-
-			port {
-				ov7670_0: endpoint {
-					hsync-active = <1>;
-					vsync-active = <1>;
-					remote-endpoint = <&camera0_0>;
-				};
-			};
-		};
-	};
-
-	battery {
-		compatible = "olpc,xo1.5-battery", "olpc,xo1-battery";
-	};
-
-	wlan_reg: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio 34 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	wlan_pwrseq: pwrseq0 {
-		compatible = "mmc-pwrseq-sd8787";
-		powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
-	};
-
-	sound-card {
-		compatible = "audio-graph-card";
-		label = "OLPC XO";
-		dais = <&sspa0_dai>;
-		routing = "Headphones", "HPOL",
-			  "Headphones", "HPOR",
-			  "MIC2", "Mic Jack";
-		widgets = "Headphone", "Headphones", "Microphone", "Mic Jack";
-		hp-det-gpio = <&gpio 97 GPIO_ACTIVE_HIGH>;
-		mic-det-gpio = <&gpio 96 GPIO_ACTIVE_HIGH>;
-	};
-
-	soc {
-		axi@d4200000 {
-			ap-sp@d4290000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "olpc,ap-sp";
-				interrupts = <40>;
-				reg = <0xd4290000 0x1000>;
-				data-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>;
-				clk-gpios = <&gpio 71 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-		};
-	};
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&usb_phy0 {
-	status = "okay";
-};
-
-&usb_otg0 {
-	status = "okay";
-};
-
-&mmc1 {
-	clock-frequency = <50000000>;
-	no-1-8-v;
-	mrvl,clk-delay-cycles = <31>;
-	broken-cd;
-	status = "okay";
-};
-
-&mmc2 {
-	clock-frequency = <50000000>;
-	no-1-8-v;
-	bus-width = <4>;
-	non-removable;
-	broken-cd;
-	wakeup-source;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&wlan_pwrseq>;
-	vmmc-supply = <&wlan_reg>;
-	status = "okay";
-};
-
-&mmc3 {
-	clock-frequency = <50000000>;
-	no-1-8-v;
-	bus-width = <8>;
-	non-removable;
-	broken-cd;
-	mrvl,clk-delay-cycles = <31>;
-	status = "okay";
-};
-
-&twsi1 {
-	status = "okay";
-
-	audio-codec@1a {
-		compatible = "realtek,alc5631";
-		reg = <0x1a>;
-		status = "okay";
-
-		port {
-			rt5631_0: endpoint {
-				mclk-fs = <256>;
-				clocks = <&audio_clk MMP2_CLK_AUDIO_SYSCLK>;
-				remote-endpoint = <&sspa0_0>;
-			};
-		};
-	};
-};
-
-&twsi2 {
-	status = "okay";
-
-	rtc@68 {
-		compatible = "dallas,ds1338";
-		reg = <0x68>;
-		status = "okay";
-	};
-};
-
-&twsi6 {
-	status = "okay";
-
-	accelerometer@1d {
-		compatible = "st,lis331dlh", "st,lis3lv02d";
-		reg = <0x1d>;
-		status = "okay";
-	};
-};
-
-&ssp3 {
-	#address-cells = <0>;
-	spi-slave;
-	status = "okay";
-	ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
-
-	slave {
-		compatible = "olpc,xo1.75-ec";
-		spi-cpha;
-		cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&camera0 {
-	status = "okay";
-
-	port {
-		camera0_0: endpoint {
-			remote-endpoint = <&ov7670_0>;
-		};
-	};
-};
-
-&asram {
-	status = "okay";
-};
-
-&adma0 {
-	status = "okay";
-};
-
-&audio_clk {
-	status = "okay";
-};
-
-&sspa0 {
-	status = "okay";
-	dmas = <&adma0 0>, <&adma0 1>;
-	dma-names = "tx", "rx";
-
-	sspa0_dai: port {
-		sspa0_0: endpoint {
-			remote-endpoint = <&rt5631_0>;
-			frame-master;
-			bitclock-master;
-			dai-format = "i2s";
-		};
-	};
-};
-
-&gpu {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
deleted file mode 100644
index 987d792f67eaf..0000000000000
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ /dev/null
@@ -1,516 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- */
-
-#include <dt-bindings/clock/marvell,mmp2.h>
-#include <dt-bindings/power/marvell,mmp2.h>
-#include <dt-bindings/clock/marvell,mmp2-audio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		i2c0 = &twsi1;
-		i2c1 = &twsi2;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		L2: l2-cache {
-			compatible = "marvell,tauros2-cache";
-			marvell,tauros2-cache-features = <0x3>;
-		};
-
-		axi@d4200000 {	/* AXI */
-			compatible = "mrvl,axi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4200000 0x00200000>;
-			ranges;
-
-			gpu: gpu@d420d000 {
-				compatible = "vivante,gc";
-				reg = <0xd420d000 0x4000>;
-				interrupts = <8>;
-				status = "disabled";
-				clocks = <&soc_clocks MMP2_CLK_GPU_3D>,
-					 <&soc_clocks MMP2_CLK_GPU_BUS>;
-				clock-names = "core", "bus";
-				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
-			};
-
-			intc: interrupt-controller@d4282000 {
-				compatible = "mrvl,mmp2-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd4282000 0x1000>;
-				mrvl,intc-nr-irqs = <64>;
-			};
-
-			intcmux4: interrupt-controller@d4282150 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <4>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x150 0x4>, <0x168 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			intcmux5: interrupt-controller@d4282154 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <5>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x154 0x4>, <0x16c 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-				mrvl,clr-mfp-irq = <1>;
-			};
-
-			intcmux9: interrupt-controller@d4282180 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <9>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x180 0x4>, <0x17c 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <3>;
-			};
-
-			intcmux17: interrupt-controller@d4282158 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <17>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x158 0x4>, <0x170 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <5>;
-			};
-
-			intcmux35: interrupt-controller@d428215c {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <35>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x15c 0x4>, <0x174 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <15>;
-			};
-
-			intcmux51: interrupt-controller@d4282160 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <51>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x160 0x4>, <0x178 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			intcmux55: interrupt-controller@d4282188 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <55>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x188 0x4>, <0x184 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			usb_phy0: usb-phy@d4207000 {
-				compatible = "marvell,mmp2-usb-phy";
-				reg = <0xd4207000 0x40>;
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-
-			usb_otg0: usb-otg@d4208000 {
-				compatible = "marvell,pxau2o-ehci";
-				reg = <0xd4208000 0x200>;
-				interrupts = <44>;
-				clocks = <&soc_clocks MMP2_CLK_USB>;
-				clock-names = "USBCLK";
-				phys = <&usb_phy0>;
-				phy-names = "usb";
-				status = "disabled";
-			};
-
-			mmc1: mmc@d4280000 {
-				compatible = "mrvl,pxav3-mmc";
-				reg = <0xd4280000 0x120>;
-				clocks = <&soc_clocks MMP2_CLK_SDH0>;
-				clock-names = "io";
-				interrupts = <39>;
-				status = "disabled";
-			};
-
-			mmc2: mmc@d4280800 {
-				compatible = "mrvl,pxav3-mmc";
-				reg = <0xd4280800 0x120>;
-				clocks = <&soc_clocks MMP2_CLK_SDH1>;
-				clock-names = "io";
-				interrupts = <52>;
-				status = "disabled";
-			};
-
-			mmc3: mmc@d4281000 {
-				compatible = "mrvl,pxav3-mmc";
-				reg = <0xd4281000 0x120>;
-				clocks = <&soc_clocks MMP2_CLK_SDH2>;
-				clock-names = "io";
-				interrupts = <53>;
-				status = "disabled";
-			};
-
-			mmc4: mmc@d4281800 {
-				compatible = "mrvl,pxav3-mmc";
-				reg = <0xd4281800 0x120>;
-				clocks = <&soc_clocks MMP2_CLK_SDH3>;
-				clock-names = "io";
-				interrupts = <54>;
-				status = "disabled";
-			};
-
-			camera0: camera@d420a000 {
-				compatible = "marvell,mmp2-ccic";
-				reg = <0xd420a000 0x800>;
-				interrupts = <42>;
-				clocks = <&soc_clocks MMP2_CLK_CCIC0>;
-				clock-names = "axi";
-				#clock-cells = <0>;
-				clock-output-names = "mclk";
-				status = "disabled";
-			};
-
-			camera1: camera@d420a800 {
-				compatible = "marvell,mmp2-ccic";
-				reg = <0xd420a800 0x800>;
-				interrupts = <30>;
-				clocks = <&soc_clocks MMP2_CLK_CCIC1>;
-				clock-names = "axi";
-				#clock-cells = <0>;
-				clock-output-names = "mclk";
-				status = "disabled";
-			};
-
-			adma0: dma-controller@d42a0800 {
-				compatible = "marvell,adma-1.0";
-				reg = <0xd42a0800 0x100>;
-				interrupts = <48>;
-				#dma-cells = <1>;
-				asram = <&asram>;
-				iram = <&asram>;
-				status = "disabled";
-			};
-
-			adma1: dma-controller@d42a0900 {
-				compatible = "marvell,adma-1.0";
-				reg = <0xd42a0900 0x100>;
-				interrupts = <48>;
-				#dma-cells = <1>;
-				status = "disabled";
-			};
-
-			audio_clk: clocks@d42a0c30 {
-				compatible = "marvell,mmp2-audio-clock";
-				reg = <0xd42a0c30 0x10>;
-				clock-names = "audio", "vctcxo", "i2s0", "i2s1";
-				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
-					 <&soc_clocks MMP2_CLK_VCTCXO>,
-					 <&soc_clocks MMP2_CLK_I2S0>,
-					 <&soc_clocks MMP2_CLK_I2S1>;
-				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
-				#clock-cells = <1>;
-				status = "disabled";
-			};
-
-			sspa0: audio-controller@d42a0c00 {
-				compatible = "marvell,mmp-sspa";
-				reg = <0xd42a0c00 0x30>,
-				      <0xd42a0c80 0x30>;
-				interrupts = <2>;
-				clock-names = "audio", "bitclk";
-				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
-					 <&audio_clk MMP2_CLK_AUDIO_SSPA0>;
-				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-
-			sspa1: audio-controller@d42a0d00 {
-				compatible = "marvell,mmp-sspa";
-				reg = <0xd42a0d00 0x30>,
-				      <0xd42a0d80 0x30>;
-				interrupts = <3>;
-				clock-names = "audio", "bitclk";
-				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
-					 <&audio_clk MMP2_CLK_AUDIO_SSPA1>;
-				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		apb@d4000000 {	/* APB */
-			compatible = "mrvl,apb-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4000000 0x00200000>;
-			ranges;
-
-			dma-controller@d4000000 {
-				compatible = "marvell,pdma-1.0";
-				reg = <0xd4000000 0x10000>;
-				interrupts = <48>;
-				/* For backwards compatibility: */
-				#dma-channels = <16>;
-				dma-channels = <16>;
-				status = "disabled";
-			};
-
-			timer0: timer@d4014000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4014000 0x100>;
-				interrupts = <13>;
-				clocks = <&soc_clocks MMP2_CLK_TIMER>;
-			};
-
-			uart1: serial@d4030000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4030000 0x1000>;
-				interrupts = <27>;
-				clocks = <&soc_clocks MMP2_CLK_UART0>;
-				resets = <&soc_clocks MMP2_CLK_UART0>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			uart2: serial@d4017000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4017000 0x1000>;
-				interrupts = <28>;
-				clocks = <&soc_clocks MMP2_CLK_UART1>;
-				resets = <&soc_clocks MMP2_CLK_UART1>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			uart3: serial@d4018000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4018000 0x1000>;
-				interrupts = <24>;
-				clocks = <&soc_clocks MMP2_CLK_UART2>;
-				resets = <&soc_clocks MMP2_CLK_UART2>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			uart4: serial@d4016000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4016000 0x1000>;
-				interrupts = <46>;
-				clocks = <&soc_clocks MMP2_CLK_UART3>;
-				resets = <&soc_clocks MMP2_CLK_UART3>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			gpio: gpio@d4019000 {
-				compatible = "marvell,mmp2-gpio";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xd4019000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupts = <49>;
-				interrupt-names = "gpio_mux";
-				clocks = <&soc_clocks MMP2_CLK_GPIO>;
-				resets = <&soc_clocks MMP2_CLK_GPIO>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ranges;
-
-				gcb0: gpio@d4019000 {
-					reg = <0xd4019000 0x4>;
-				};
-
-				gcb1: gpio@d4019004 {
-					reg = <0xd4019004 0x4>;
-				};
-
-				gcb2: gpio@d4019008 {
-					reg = <0xd4019008 0x4>;
-				};
-
-				gcb3: gpio@d4019100 {
-					reg = <0xd4019100 0x4>;
-				};
-
-				gcb4: gpio@d4019104 {
-					reg = <0xd4019104 0x4>;
-				};
-
-				gcb5: gpio@d4019108 {
-					reg = <0xd4019108 0x4>;
-				};
-			};
-
-			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4011000 0x1000>;
-				interrupts = <7>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI0>;
-				resets = <&soc_clocks MMP2_CLK_TWSI0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				mrvl,i2c-fast-mode;
-				status = "disabled";
-			};
-
-			twsi2: i2c@d4031000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4031000 0x1000>;
-				interrupt-parent = <&intcmux17>;
-				interrupts = <0>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
-				resets = <&soc_clocks MMP2_CLK_TWSI1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			twsi3: i2c@d4032000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4032000 0x1000>;
-				interrupt-parent = <&intcmux17>;
-				interrupts = <1>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI2>;
-				resets = <&soc_clocks MMP2_CLK_TWSI2>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			twsi4: i2c@d4033000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4033000 0x1000>;
-				interrupt-parent = <&intcmux17>;
-				interrupts = <2>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI3>;
-				resets = <&soc_clocks MMP2_CLK_TWSI3>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-
-			twsi5: i2c@d4033800 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4033800 0x1000>;
-				interrupt-parent = <&intcmux17>;
-				interrupts = <3>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI4>;
-				resets = <&soc_clocks MMP2_CLK_TWSI4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			twsi6: i2c@d4034000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4034000 0x1000>;
-				interrupt-parent = <&intcmux17>;
-				interrupts = <4>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI5>;
-				resets = <&soc_clocks MMP2_CLK_TWSI5>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			rtc: rtc@d4010000 {
-				compatible = "mrvl,mmp-rtc";
-				reg = <0xd4010000 0x1000>;
-				interrupts = <1>, <0>;
-				interrupt-names = "rtc 1Hz", "rtc alarm";
-				interrupt-parent = <&intcmux5>;
-				clocks = <&soc_clocks MMP2_CLK_RTC>;
-				resets = <&soc_clocks MMP2_CLK_RTC>;
-				status = "disabled";
-			};
-
-			ssp1: spi@d4035000 {
-				compatible = "marvell,mmp2-ssp";
-				reg = <0xd4035000 0x1000>;
-				clocks = <&soc_clocks MMP2_CLK_SSP0>;
-				interrupts = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			ssp2: spi@d4036000 {
-				compatible = "marvell,mmp2-ssp";
-				reg = <0xd4036000 0x1000>;
-				clocks = <&soc_clocks MMP2_CLK_SSP1>;
-				interrupts = <1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			ssp3: spi@d4037000 {
-				compatible = "marvell,mmp2-ssp";
-				reg = <0xd4037000 0x1000>;
-				clocks = <&soc_clocks MMP2_CLK_SSP2>;
-				interrupts = <20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			ssp4: spi@d4039000 {
-				compatible = "marvell,mmp2-ssp";
-				reg = <0xd4039000 0x1000>;
-				clocks = <&soc_clocks MMP2_CLK_SSP3>;
-				interrupts = <21>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		asram: sram@e0000000 {
-			compatible = "mmio-sram";
-			reg = <0xe0000000 0x10000>;
-			ranges = <0 0xe0000000 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		soc_clocks: clocks {
-			compatible = "marvell,mmp2-clock";
-			reg = <0xd4050000 0x2000>,
-			      <0xd4282800 0x400>,
-			      <0xd4015000 0x1000>;
-			reg-names = "mpmu", "apmu", "apbc";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts
deleted file mode 100644
index fe6df364a9eb6..0000000000000
--- a/arch/arm/boot/dts/mmp3-dell-ariel.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Dell Wyse 3020 a.k.a. "Ariel" a.k.a. Tx0D (T00D, T10D)
- *
- * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
- */
-
-/dts-v1/;
-#include "mmp3.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Dell Ariel";
-	compatible = "dell,wyse-ariel", "marvell,mmp3";
-
-	aliases {
-		serial2 = &uart3;
-	};
-
-	chosen {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-		bootargs = "earlyprintk=ttyS2,115200 console=ttyS2,115200";
-	};
-
-	memory@0 {
-		available = <0x7f700000 0x7ff00000 0x00000000 0x7f600000>;
-		reg = <0x0 0x80000000>;
-		device_type = "memory";
-	};
-
-	ec_input_spi: spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		num-chipselects = <0>;
-		sck-gpios = <&gpio 55 GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&usb_otg0 {
-	status = "okay";
-};
-
-&usb_otg_phy0 {
-	status = "okay";
-};
-
-&hsic0 {
-	status = "okay";
-
-	usb1@1 {
-		compatible = "usb424,2640";
-		reg = <0x01>;
-		#address-cells = <0x01>;
-		#size-cells = <0x00>;
-
-		mass-storage@1 {
-			compatible = "usb424,4040";
-			reg = <0x01>;
-			status = "disabled";
-		};
-	};
-};
-
-&hsic_phy0 {
-	status = "okay";
-	reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
-};
-
-&mmc3 {
-	status = "okay";
-	max-frequency = <50000000>;
-	status = "okay";
-	bus-width = <8>;
-	non-removable;
-	cap-mmc-highspeed;
-};
-
-&twsi1 {
-	status = "okay";
-
-	rtc@68 {
-		compatible = "dallas,ds1338";
-		reg = <0x68>;
-		status = "okay";
-	};
-};
-
-&twsi3 {
-	status = "okay";
-};
-
-&twsi4 {
-	status = "okay";
-
-	embedded-controller@58 {
-		compatible = "dell,wyse-ariel-ec", "ene,kb3930";
-		reg = <0x58>;
-		system-power-controller;
-
-		off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>,
-			    <&gpio 127 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&ssp1 {
-	status = "okay";
-	cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-
-	firmware-flash@0 {
-		compatible = "winbond,w25q32", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-		m25p,fast-read;
-	};
-};
-
-&ec_input_spi {
-	status = "okay";
-	cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
-
-	power-button@0 {
-		reg = <0>;
-		interrupt-parent = <&gpio>;
-		interrupts = <60 IRQ_TYPE_EDGE_RISING>;
-		compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input";
-		spi-max-frequency = <33000000>;
-	};
-};
-
-&gpu_2d {
-	status = "okay";
-};
-
-&gpu_3d {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
deleted file mode 100644
index a4fb9203ec1fb..0000000000000
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ /dev/null
@@ -1,608 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- *  Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
- */
-
-#include <dt-bindings/clock/marvell,mmp2.h>
-#include <dt-bindings/power/marvell,mmp2.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,mmp3-smp";
-
-		cpu@0 {
-			compatible = "marvell,pj4b";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "marvell,pj4b";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <1>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		axi@d4200000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4200000 0x00200000>;
-			ranges;
-
-			interrupt-controller@d4282000 {
-				compatible = "marvell,mmp3-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd4282000 0x1000>,
-				      <0xd4284000 0x100>;
-				mrvl,intc-nr-irqs = <64>;
-			};
-
-			pmic_mux: interrupt-controller@d4282150 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x150 0x4>, <0x168 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <4>;
-			};
-
-			rtc_mux: interrupt-controller@d4282154 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x154 0x4>, <0x16c 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			hsi3_mux: interrupt-controller@d42821bc {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x1bc 0x4>, <0x1a4 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <3>;
-			};
-
-			gpu_mux: interrupt-controller@d42821c0 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x1c0 0x4>, <0x1a8 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <3>;
-			};
-
-			twsi_mux: interrupt-controller@d4282158 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x158 0x4>, <0x170 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <5>;
-			};
-
-			hsi2_mux: interrupt-controller@d42821c4 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x1c4 0x4>, <0x1ac 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			dxo_mux: interrupt-controller@d42821c8 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x1c8 0x4>, <0x1b0 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			misc1_mux: interrupt-controller@d428215c {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x15c 0x4>, <0x174 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <31>;
-			};
-
-			ci_mux: interrupt-controller@d42821cc {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x1cc 0x4>, <0x1b4 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			ssp_mux: interrupt-controller@d4282160 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x160 0x4>, <0x178 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			hsi1_mux: interrupt-controller@d4282184 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x184 0x4>, <0x17c 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <4>;
-			};
-
-			misc2_mux: interrupt-controller@d4282188 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x188 0x4>, <0x180 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <20>;
-			};
-
-			hsi0_mux: interrupt-controller@d42821d0 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x1d0 0x4>, <0x1b8 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <5>;
-			};
-
-			usb_otg_phy0: usb-phy@d4207000 {
-				compatible = "marvell,mmp3-usb-phy";
-				reg = <0xd4207000 0x40>;
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-
-			usb_otg0: usb@d4208000 {
-				compatible = "marvell,pxau2o-ehci";
-				reg = <0xd4208000 0x200>;
-				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&soc_clocks MMP2_CLK_USB>;
-				clock-names = "USBCLK";
-				phys = <&usb_otg_phy0>;
-				phy-names = "usb";
-				status = "disabled";
-			};
-
-			hsic_phy0: usb-phy@f0001800 {
-				compatible = "marvell,mmp3-hsic-phy";
-				reg = <0xf0001800 0x40>;
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-
-			hsic0: usb@f0001000 {
-				compatible = "marvell,pxau2o-ehci";
-				reg = <0xf0001000 0x200>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&soc_clocks MMP2_CLK_USBHSIC0>;
-				clock-names = "USBCLK";
-				phys = <&hsic_phy0>;
-				phy-names = "usb";
-				phy_type = "hsic";
-				#address-cells = <0x01>;
-				#size-cells = <0x00>;
-				status = "disabled";
-			};
-
-			hsic_phy1: usb-phy@f0002800 {
-				compatible = "marvell,mmp3-hsic-phy";
-				reg = <0xf0002800 0x40>;
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-
-			hsic1: usb@f0002000 {
-				compatible = "marvell,pxau2o-ehci";
-				reg = <0xf0002000 0x200>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&soc_clocks MMP2_CLK_USBHSIC1>;
-				clock-names = "USBCLK";
-				phys = <&hsic_phy1>;
-				phy-names = "usb";
-				phy_type = "hsic";
-				#address-cells = <0x01>;
-				#size-cells = <0x00>;
-				status = "disabled";
-			};
-
-			mmc1: mmc@d4280000 {
-				compatible = "mrvl,pxav3-mmc";
-				reg = <0xd4280000 0x120>;
-				clocks = <&soc_clocks MMP2_CLK_SDH0>;
-				clock-names = "io";
-				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			mmc2: mmc@d4280800 {
-				compatible = "mrvl,pxav3-mmc";
-				reg = <0xd4280800 0x120>;
-				clocks = <&soc_clocks MMP2_CLK_SDH1>;
-				clock-names = "io";
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			mmc3: mmc@d4281000 {
-				compatible = "mrvl,pxav3-mmc";
-				reg = <0xd4281000 0x120>;
-				clocks = <&soc_clocks MMP2_CLK_SDH2>;
-				clock-names = "io";
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			mmc4: mmc@d4281800 {
-				compatible = "mrvl,pxav3-mmc";
-				reg = <0xd4281800 0x120>;
-				clocks = <&soc_clocks MMP2_CLK_SDH3>;
-				clock-names = "io";
-				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			mmc5: mmc@d4217000 {
-				compatible = "mrvl,pxav3-mmc";
-				reg = <0xd4217000 0x120>;
-				clocks = <&soc_clocks MMP3_CLK_SDH4>;
-				clock-names = "io";
-				interrupt-parent = <&hsi1_mux>;
-				interrupts = <0>;
-				status = "disabled";
-			};
-
-			camera0: camera@d420a000 {
-				compatible = "marvell,mmp2-ccic";
-				reg = <0xd420a000 0x800>;
-				interrupts = <1>;
-				interrupt-parent = <&ci_mux>;
-				clocks = <&soc_clocks MMP2_CLK_CCIC0>;
-				clock-names = "axi";
-				power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
-				#clock-cells = <0>;
-				clock-output-names = "mclk";
-				status = "disabled";
-			};
-
-			camera1: camera@d420a800 {
-				compatible = "marvell,mmp2-ccic";
-				reg = <0xd420a800 0x800>;
-				interrupts = <2>;
-				interrupt-parent = <&ci_mux>;
-				clocks = <&soc_clocks MMP2_CLK_CCIC1>;
-				clock-names = "axi";
-				power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
-				#clock-cells = <0>;
-				clock-output-names = "mclk";
-				status = "disabled";
-			};
-
-			gpu_3d: gpu@d420d000 {
-				compatible = "vivante,gc";
-				reg = <0xd420d000 0x2000>;
-				interrupt-parent = <&gpu_mux>;
-				interrupts = <0>;
-				status = "disabled";
-				clocks = <&soc_clocks MMP3_CLK_GPU_3D>,
-					 <&soc_clocks MMP3_CLK_GPU_BUS>;
-				clock-names = "core", "bus";
-				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
-			};
-
-			gpu_2d: gpu@d420f000 {
-				compatible = "vivante,gc";
-				reg = <0xd420f000 0x2000>;
-				interrupt-parent = <&gpu_mux>;
-				interrupts = <2>;
-				status = "disabled";
-				clocks = <&soc_clocks MMP3_CLK_GPU_2D>,
-					 <&soc_clocks MMP3_CLK_GPU_BUS>;
-				clock-names = "core", "bus";
-				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
-			};
-		};
-
-		apb@d4000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4000000 0x00200000>;
-			ranges;
-
-			timer: timer@d4014000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4014000 0x100>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&soc_clocks MMP2_CLK_TIMER>;
-			};
-
-			uart1: serial@d4030000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4030000 0x1000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&soc_clocks MMP2_CLK_UART0>;
-				resets = <&soc_clocks MMP2_CLK_UART0>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			uart2: serial@d4017000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4017000 0x1000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&soc_clocks MMP2_CLK_UART1>;
-				resets = <&soc_clocks MMP2_CLK_UART1>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			uart3: serial@d4018000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4018000 0x1000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&soc_clocks MMP2_CLK_UART2>;
-				resets = <&soc_clocks MMP2_CLK_UART2>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			uart4: serial@d4016000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4016000 0x1000>;
-				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&soc_clocks MMP2_CLK_UART3>;
-				resets = <&soc_clocks MMP2_CLK_UART3>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			gpio: gpio@d4019000 {
-				compatible = "marvell,mmp2-gpio";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xd4019000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "gpio_mux";
-				clocks = <&soc_clocks MMP2_CLK_GPIO>;
-				resets = <&soc_clocks MMP2_CLK_GPIO>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ranges;
-
-				gcb0: gpio@d4019000 {
-					reg = <0xd4019000 0x4>;
-				};
-
-				gcb1: gpio@d4019004 {
-					reg = <0xd4019004 0x4>;
-				};
-
-				gcb2: gpio@d4019008 {
-					reg = <0xd4019008 0x4>;
-				};
-
-				gcb3: gpio@d4019100 {
-					reg = <0xd4019100 0x4>;
-				};
-
-				gcb4: gpio@d4019104 {
-					reg = <0xd4019104 0x4>;
-				};
-
-				gcb5: gpio@d4019108 {
-					reg = <0xd4019108 0x4>;
-				};
-			};
-
-			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4011000 0x70>;
-				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI0>;
-				resets = <&soc_clocks MMP2_CLK_TWSI0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				mrvl,i2c-fast-mode;
-				status = "disabled";
-			};
-
-			twsi2: i2c@d4031000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4031000 0x70>;
-				interrupt-parent = <&twsi_mux>;
-				interrupts = <0>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
-				resets = <&soc_clocks MMP2_CLK_TWSI1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			twsi3: i2c@d4032000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4032000 0x70>;
-				interrupt-parent = <&twsi_mux>;
-				interrupts = <1>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI2>;
-				resets = <&soc_clocks MMP2_CLK_TWSI2>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			twsi4: i2c@d4033000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4033000 0x70>;
-				interrupt-parent = <&twsi_mux>;
-				interrupts = <2>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI3>;
-				resets = <&soc_clocks MMP2_CLK_TWSI3>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-
-			twsi5: i2c@d4033800 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4033800 0x70>;
-				interrupt-parent = <&twsi_mux>;
-				interrupts = <3>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI4>;
-				resets = <&soc_clocks MMP2_CLK_TWSI4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			twsi6: i2c@d4034000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4034000 0x70>;
-				interrupt-parent = <&twsi_mux>;
-				interrupts = <4>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI5>;
-				resets = <&soc_clocks MMP2_CLK_TWSI5>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			rtc: rtc@d4010000 {
-				compatible = "mrvl,mmp-rtc";
-				reg = <0xd4010000 0x1000>;
-				interrupts = <1>, <0>;
-				interrupt-names = "rtc 1Hz", "rtc alarm";
-				interrupt-parent = <&rtc_mux>;
-				clocks = <&soc_clocks MMP2_CLK_RTC>;
-				resets = <&soc_clocks MMP2_CLK_RTC>;
-				status = "disabled";
-			};
-
-			ssp1: spi@d4035000 {
-				compatible = "marvell,mmp2-ssp";
-				reg = <0xd4035000 0x1000>;
-				clocks = <&soc_clocks MMP2_CLK_SSP0>;
-				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			ssp2: spi@d4036000 {
-				compatible = "marvell,mmp2-ssp";
-				reg = <0xd4036000 0x1000>;
-				clocks = <&soc_clocks MMP2_CLK_SSP1>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			ssp3: spi@d4037000 {
-				compatible = "marvell,mmp2-ssp";
-				reg = <0xd4037000 0x1000>;
-				clocks = <&soc_clocks MMP2_CLK_SSP2>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			ssp4: spi@d4039000 {
-				compatible = "marvell,mmp2-ssp";
-				reg = <0xd4039000 0x1000>;
-				clocks = <&soc_clocks MMP2_CLK_SSP3>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		l2: cache-controller@d0020000 {
-			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
-			reg = <0xd0020000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		soc_clocks: clocks@d4050000 {
-			compatible = "marvell,mmp3-clock";
-			reg = <0xd4050000 0x2000>,
-			      <0xd4282800 0x400>,
-			      <0xd4015000 0x1000>;
-			reg-names = "mpmu", "apmu", "apbc";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
-
-		snoop-control-unit@e0000000 {
-			compatible = "arm,arm11mp-scu";
-			reg = <0xe0000000 0x100>;
-		};
-
-		gic: interrupt-controller@e0001000 {
-			compatible = "arm,arm11mp-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0xe0001000 0x1000>,
-			      <0xe0000100 0x100>;
-		};
-
-		local-timer@e0000600 {
-			compatible = "arm,arm11mp-twd-timer";
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			reg = <0xe0000600 0x20>;
-		};
-
-		watchdog@e0000620 {
-			compatible = "arm,arm11mp-twd-wdt";
-			reg = <0xe0000620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
deleted file mode 100644
index ea02fd403a9b4..0000000000000
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ /dev/null
@@ -1,272 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Common CPCAP configuration used on Motorola phones
- */
-
-&mcspi1 {
-	cpcap: pmic@0 {
-		compatible = "motorola,cpcap", "st,6556002";
-		reg = <0>;	/* cs0 */
-		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		spi-max-frequency = <9600000>;
-		spi-cs-high;
-		spi-cpol;
-		spi-cpha;
-
-		cpcap_adc: adc {
-			compatible = "motorola,mapphone-cpcap-adc";
-			interrupts-extended = <&cpcap 8 0>;
-			interrupt-names = "adcdone";
-			#io-channel-cells = <1>;
-		};
-
-		cpcap_battery: battery {
-			compatible = "motorola,cpcap-battery";
-			interrupts-extended =
-				<&cpcap 6 0>, <&cpcap 5 0>, <&cpcap 3 0>,
-				<&cpcap 20 0>, <&cpcap 54 0>, <&cpcap 57 0>;
-			interrupt-names =
-				"eol", "lowbph", "lowbpl",
-				"chrgcurr1", "battdetb", "cccal";
-			io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
-				      <&cpcap_adc 5>, <&cpcap_adc 6>;
-			io-channel-names = "battdetb", "battp",
-					   "chg_isense", "batti";
-			power-supplies = <&cpcap_charger>;
-		};
-
-		cpcap_charger: charger {
-			compatible = "motorola,mapphone-cpcap-charger";
-			interrupts-extended =
-				<&cpcap 13 0>, <&cpcap 12 0>, <&cpcap 29 0>,
-				<&cpcap 28 0>, <&cpcap 22 0>, <&cpcap 21 0>,
-				<&cpcap 20 0>, <&cpcap 19 0>, <&cpcap 54 0>;
-			interrupt-names =
-				"chrg_det", "rvrs_chrg", "chrg_se1b",
-				"se0conn", "rvrs_mode", "chrgcurr2",
-				"chrgcurr1", "vbusvld", "battdetb";
-			mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>,
-				     <&gpio3 23 GPIO_ACTIVE_LOW>;
-			io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
-				      <&cpcap_adc 2>, <&cpcap_adc 5>,
-				      <&cpcap_adc 6>;
-			io-channel-names = "battdetb", "battp",
-					   "vbus", "chg_isense",
-					   "batti";
-		};
-
-		cpcap_regulator: regulator {
-			compatible = "motorola,mapphone-cpcap-regulator";
-
-			cpcap_regulators: regulators {
-			};
-		};
-
-		cpcap_audio: audio-codec {
-			#sound-dai-cells = <1>;
-
-			port@0 {
-				cpcap_audio_codec0: endpoint {
-				};
-			};
-			port@1 {
-				cpcap_audio_codec1: endpoint {
-				};
-			};
-		};
-
-		cpcap_rtc: rtc {
-			compatible = "motorola,cpcap-rtc";
-
-			interrupt-parent = <&cpcap>;
-			interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
-		};
-
-		power_button: button {
-			compatible = "motorola,cpcap-pwrbutton";
-
-			interrupts = <23 IRQ_TYPE_NONE>;
-		};
-
-		cpcap_usb2_phy: phy {
-			compatible = "motorola,mapphone-cpcap-usb-phy";
-			pinctrl-0 = <&usb_gpio_mux_sel1>, <&usb_gpio_mux_sel2>;
-			pinctrl-1 = <&usb_ulpi_pins>;
-			pinctrl-2 = <&usb_utmi_pins>;
-			pinctrl-3 = <&uart3_pins>;
-			pinctrl-names = "default", "ulpi", "utmi", "uart";
-			#phy-cells = <0>;
-			interrupts-extended =
-				<&cpcap 15 0>, <&cpcap 14 0>, <&cpcap 28 0>,
-				<&cpcap 19 0>, <&cpcap 18 0>, <&cpcap 17 0>,
-				<&cpcap 16 0>, <&cpcap 49 0>, <&cpcap 48 0>;
-			interrupt-names =
-				"id_ground", "id_float", "se0conn",
-				"vbusvld", "sessvld", "sessend",
-				"se1", "dm", "dp";
-			mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,
-				     <&gpio1 0 GPIO_ACTIVE_HIGH>;
-			io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
-			io-channel-names = "vbus", "id";
-			vusb-supply = <&vusb>;
-		};
-
-		led_red: led-red {
-			compatible = "motorola,cpcap-led-red";
-			vdd-supply = <&sw5>;
-			label = "status-led:red";
-		};
-
-		led_green: led-green {
-			compatible = "motorola,cpcap-led-green";
-			vdd-supply = <&sw5>;
-			label = "status-led:green";
-		};
-
-		led_blue: led-blue {
-			compatible = "motorola,cpcap-led-blue";
-			vdd-supply = <&sw5>;
-			label = "status-led:blue";
-		};
-
-		led_adl: led-adl {
-			compatible = "motorola,cpcap-led-adl";
-			vdd-supply = <&sw5>;
-			label = "button-backlight";
-		};
-
-		led_cp: led-cp {
-			compatible = "motorola,cpcap-led-cp";
-			vdd-supply = <&sw5>;
-			label = "shift-key-light";
-		};
-	};
-};
-
-&cpcap_regulators {
-	sw5: SW5 {
-		regulator-min-microvolt = <5050000>;
-		regulator-max-microvolt = <5050000>;
-		regulator-enable-ramp-delay = <50000>;
-		regulator-boot-on;
-	};
-
-	vcam: VCAM {
-		regulator-min-microvolt = <2900000>;
-		regulator-max-microvolt = <2900000>;
-		regulator-enable-ramp-delay = <1000>;
-	};
-
-	/* Used by DSS and is the "zerov_regulator" trigger for SoC off mode */
-	vcsi: VCSI {
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-enable-ramp-delay = <1000>;
-		regulator-always-on;
-	};
-
-	vdac: VDAC {
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-enable-ramp-delay = <1000>;
-	};
-
-	vdig: VDIG {
-		regulator-min-microvolt = <1875000>;
-		regulator-max-microvolt = <1875000>;
-		regulator-enable-ramp-delay = <1000>;
-	};
-
-	vfuse: VFUSE {
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <3150000>;
-		regulator-enable-ramp-delay = <1000>;
-	};
-
-	vhvio: VHVIO {
-		regulator-min-microvolt = <2775000>;
-		regulator-max-microvolt = <2775000>;
-		regulator-enable-ramp-delay = <1000>;
-		regulator-always-on;
-	};
-
-	/* Used by eMMC at mmc2 */
-	vsdio: VSDIO {
-		regulator-min-microvolt = <2900000>;
-		regulator-max-microvolt = <2900000>;
-		regulator-enable-ramp-delay = <1000>;
-	};
-
-	vpll: VPLL {
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-enable-ramp-delay = <100>;
-	};
-
-	vrf1: VRF1 {
-		regulator-min-microvolt = <2775000>;
-		regulator-max-microvolt = <2775000>;
-		regulator-enable-ramp-delay = <1000>;
-	};
-
-	vrf2: VRF2 {
-		regulator-min-microvolt = <2775000>;
-		regulator-max-microvolt = <2775000>;
-		regulator-enable-ramp-delay = <1000>;
-	};
-
-	vrfref: VRFREF {
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2775000>;
-		regulator-enable-ramp-delay = <100>;
-	};
-
-	vwlan1: VWLAN1 {
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1900000>;
-		regulator-enable-ramp-delay = <1000>;
-	};
-
-	/* Used by micro-SDIO at mmc1 */
-	vwlan2: VWLAN2 {
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		regulator-enable-ramp-delay = <1000>;
-	};
-
-	vsim: VSIM {
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <2900000>;
-		regulator-enable-ramp-delay = <1000>;
-	};
-
-	vsimcard: VSIMCARD {
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <2900000>;
-		regulator-enable-ramp-delay = <1000>;
-	};
-
-	vvib: VVIB {
-		regulator-min-microvolt = <1300000>;
-		regulator-max-microvolt = <3000000>;
-		regulator-enable-ramp-delay = <500>;
-	};
-
-	vusb: VUSB {
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-enable-ramp-delay = <1000>;
-	};
-
-	vaudio: VAUDIO {
-		regulator-min-microvolt = <2775000>;
-		regulator-max-microvolt = <2775000>;
-		regulator-enable-ramp-delay = <1000>;
-		regulator-initial-mode = <0x00>; /* NORMAL */
-	};
-};
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
deleted file mode 100644
index f7cc8fc678fa5..0000000000000
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ /dev/null
@@ -1,737 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "omap443x.dtsi"
-#include "motorola-cpcap-mapphone.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &hdmi0;
-	};
-
-	/*
-	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
-	 * then 1023 - 1024 seems to contain mbm.
-	 */
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x3fd00000>;	/* 1021 MB */
-	};
-
-	/* Poweroff GPIO probably connected to CPCAP */
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff_gpio>;
-		pinctrl-names = "default";
-		gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;	/* gpio50 */
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		pinctrl-0 = <&hdmi_hpd_gpio>;
-		pinctrl-names = "default";
-		label = "hdmi";
-		type = "d";
-
-		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio63 */
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-	};
-
-	/*
-	 * HDMI 5V regulator probably sourced from battery. Let's keep
-	 * keep this as always enabled for HDMI to work until we've
-	 * figured what the encoder chip is.
-	 */
-	hdmi_regulator: regulator-hdmi {
-		compatible = "regulator-fixed";
-		regulator-name = "hdmi";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>;	/* gpio59 */
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	/* FS USB Host PHY on port 1 for mdm6600 */
-	fsusb1_phy: usb-phy@1 {
-		compatible = "motorola,mapphone-mdm6600";
-		pinctrl-0 = <&usb_mdm6600_pins>;
-		pinctrl-names = "default";
-		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
-		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
-		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
-		/* mode: gpio_148 gpio_149 */
-		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
-				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
-		/* cmd: gpio_103 gpio_104 gpio_142 */
-		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
-				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
-				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
-		/* status: gpio_52 gpio_53 gpio_55 */
-		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
-					<&gpio2 21 GPIO_ACTIVE_HIGH>,
-					<&gpio2 23 GPIO_ACTIVE_HIGH>;
-		#phy-cells = <0>;
-	};
-
-	/* HS USB host TLL nop-phy on port 2 for w3glte */
-	hsusb2_phy: usb-phy@2 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	/* LCD regulator from sw5 source */
-	lcd_regulator: regulator-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd";
-		regulator-min-microvolt = <5050000>;
-		regulator-max-microvolt = <5050000>;
-		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
-		enable-active-high;
-		vin-supply = <&sw5>;
-	};
-
-	/* This is probably coming straight from the battery.. */
-	wl12xx_vmmc: regulator-wl12xx {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1650000>;
-		regulator-max-microvolt = <1650000>;
-		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;	/* gpio94 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	soundcard {
-		compatible = "audio-graph-card";
-		label = "Mapphone Audio";
-
-		widgets =
-			"Speaker", "Earpiece",
-			"Speaker", "Loudspeaker",
-			"Headphone", "Headphone Jack",
-			"Microphone", "Internal Mic";
-
-		routing =
-			"Earpiece", "EP",
-			"Loudspeaker", "SPKR",
-			"Headphone Jack", "HSL",
-			"Headphone Jack", "HSR",
-			"MICR", "Internal Mic";
-
-		dais = <&mcbsp2_port>, <&mcbsp3_port>;
-	};
-
-	pwm8: pwm-8 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_direction_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer8>;
-		ti,clock-source = <0x01>;
-	};
-
-	pwm9: pwm-9 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_enable_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x01>;
-	};
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
-		pwm-names = "enable", "direction";
-		direction-duty-cycle-ns = <10000000>;
-	};
-
-	backlight: backlight {
-		compatible = "led-backlight";
-
-		leds = <&backlight_led>;
-		brightness-levels = <31 63 95 127 159 191 223 255>;
-		default-brightness-level = <6>;
-	};
-};
-
-&cpu_thermal {
-	polling-delay = <10000>; /* milliseconds */
-};
-
-&cpu_alert0 {
-        temperature = <80000>; /* millicelsius */
-};
-
-&cpu0 {
-        /*
-	 * Note that the 1.2GiHz mode is enabled for all SoC variants for
-	 * the Motorola Android Linux v3.0.8 based kernel.
-	 */
-        operating-points = <
-	        /* kHz    uV */
-	        300000  1025000
-	        600000  1200000
-	        800000  1313000
-	        1008000 1375000
-		1200000 1375000
-        >;
-};
-
-&dss {
-	status = "okay";
-};
-
-&dsi1 {
-	status = "okay";
-	vdd-supply = <&vcsi>;
-
-	port {
-		dsi1_out_ep: endpoint {
-			remote-endpoint = <&lcd0_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd0: panel@0 {
-		compatible = "motorola,droid4-panel", "panel-dsi-cm";
-		reg = <0>;
-		label = "lcd0";
-		vddi-supply = <&lcd_regulator>;
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
-
-		backlight = <&backlight>;
-
-		width-mm = <50>;
-		height-mm = <89>;
-		rotation = <90>;
-
-		panel-timing {
-			clock-frequency = <0>;		/* Calculated by dsi */
-
-			hback-porch = <2>;
-			hactive = <540>;
-			hfront-porch = <0>;
-			hsync-len = <2>;
-
-			vback-porch = <1>;
-			vactive = <960>;
-			vfront-porch = <0>;
-			vsync-len = <1>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd0_in: endpoint {
-				remote-endpoint = <&dsi1_out_ep>;
-			};
-		};
-	};
-};
-
-&hdmi {
-	status = "okay";
-	pinctrl-0 = <&dss_hdmi_pins>;
-	pinctrl-names = "default";
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&hdmi_connector_in>;
-			lanes = <1 0 3 2 5 4 7 6>;
-		};
-	};
-};
-
-/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
-&hdqw1w {
-	pinctrl-0 = <&hdq_pins>;
-	pinctrl-names = "default";
-	ti,mode = "1w";
-};
-
-&i2c1 {
-	tmp105@48 {
-		compatible = "ti,tmp105";
-		reg = <0x48>;
-		pinctrl-0 = <&tmp105_irq>;
-		pinctrl-names = "default";
-		/* kpd_row0.gpio_178 */
-		interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
-				       &omap4_pmx_core 0x14e>;
-		interrupt-names = "irq", "wakeup";
-		wakeup-source;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vwlan2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio176 */
-};
-
-&mmc2 {
-	vmmc-supply = <&vsdio>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	/* uart2_tx.sdmmc3_dat1 pad as wakeirq */
-	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core 0xde>;
-	interrupt-names = "irq", "wakeup";
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1285";
-		reg = <2>;
-		/* gpio_100 with gpmc_wait2 pad as wakeirq */
-		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
-				      <&omap4_pmx_core 0x4e>;
-		interrupt-names = "irq", "wakeup";
-		ref-clock-frequency = <26000000>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
-
-&i2c2 {
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchscreen_pins>;
-
-		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
-
-		/* gpio_183 with sys_nirq2 pad as wakeup */
-		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
-				      <&omap4_pmx_core 0x160>;
-		interrupt-names = "irq", "wakeup";
-		wakeup-source;
-	};
-
-	isl29030@44 {
-		compatible = "isil,isl29030";
-		reg = <0x44>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&als_proximity_pins>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
-	};
-};
-
-&omap4_pmx_core {
-
-	/* hdmi_hpd.gpio_63 */
-	hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
-		>;
-	};
-
-	hdq_pins: pinmux_hdq_pins {
-		pinctrl-single,pins = <
-		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
-		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
-		>;
-	};
-
-	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
-		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
-		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
-		>;
-	};
-
-	/*
-	 * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3
-	 * for gpio_100, but the internal pull makes wlan flakey on some
-	 * devices. Off mode value should be tested if we have off mode working
-	 * later on.
-	 */
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-		/* 0x4a10008e gpmc_wait2.gpio_100 d23 */
-		OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3)
-
-		/* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */
-		OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */
-		OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */
-		OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1)
-
-		/* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */
-		OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */
-		OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */
-		OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1)
-		>;
-	};
-
-	/* gpmc_ncs0.gpio_50 */
-	poweroff_gpio: pinmux_poweroff_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	/* kpd_row0.gpio_178 */
-	tmp105_irq: pinmux_tmp105_irq {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
-		/* gpio_60 */
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
-	touchscreen_pins: pinmux_touchscreen_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	als_proximity_pins: pinmux_als_proximity_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	usb_mdm6600_pins: pinmux_usb_mdm6600_pins {
-		pinctrl-single,pins = <
-		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
-		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-
-		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
-		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-
-		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
-		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
-		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
-		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-
-		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
-		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-
-		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
-		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-
-		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
-		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-
-		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
-		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
-		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
-		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
-	usb_ulpi_pins: pinmux_usb_ulpi_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x196, MUX_MODE7)
-		OMAP4_IOPAD(0x198, MUX_MODE7)
-		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	/* usb0_otg_dp and usb0_otg_dm */
-	usb_utmi_pins: pinmux_usb_utmi_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
-		OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
-		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-
-	/*
-	 * Note that the v3.0.8 stock userspace dynamically remuxes uart1
-	 * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7
-	 * when not used. If needed, we can add rts pin remux later based
-	 * on power measurements.
-	 */
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-		/* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */
-		OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */
-		OMAP4_IOPAD(0x13e, MUX_MODE1)
-
-		/* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */
-		OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1)
-
-		/* 0x4a1001ca dpm_emu14.uart1_rx aa3 */
-		OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2)
-		>;
-	};
-
-	/* uart3_tx_irtx and uart3_rx_irrx */
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x196, MUX_MODE7)
-		OMAP4_IOPAD(0x198, MUX_MODE7)
-		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1ba, MUX_MODE2)
-		OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
-		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-
-	uart4_pins: pinmux_uart4_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx */
-		OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx */
-		OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5)	/* uart4_cts */
-		OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5)	/* uart4_rts */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_clkx */
-		OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_dr */
-		OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0)	/* abe_mcbsp2_dx */
-		OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_fsx */
-		>;
-	};
-
-	mcbsp3_pins: pinmux_mcbsp3_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_dr */
-		OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1)	/* abe_mcbsp3_dx */
-		OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_clkx */
-		OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_fsx */
-		>;
-	};
-
-	vibrator_direction_pin: pinmux_vibrator_direction_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
-		>;
-	};
-
-	vibrator_enable_pin: pinmux_vibrator_enable_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
-		>;
-	};
-};
-
-&omap4_pmx_wkup {
-	usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
-		/* gpio_wk0 */
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
-		>;
-	};
-};
-
-/* RNG is used by secure mode and not accessible */
-&rng_target {
-	status = "disabled";
-};
-
-/* Configure pwm clock source for timers 8 & 9 */
-&timer8 {
-	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
-};
-
-&timer9 {
-	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
-};
-
-/*
- * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
- * for wake-up events for both the USB PHY and the UART. We can use gpio_149
- * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we
- * have gpio_149 trigger before the UART transfer starts.
- */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core 0x110>;
-	uart-has-rtscts;
-	current-speed = <115200>;
-};
-
-&uart3 {
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core 0x17c>;
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-
-	bluetooth {
-		compatible = "ti,wl1285-st";
-		enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */
-		max-speed = <3686400>;
-	};
-};
-
-&usbhsohci {
-	phys = <&fsusb1_phy>;
-	phy-names = "usb";
-};
-
-&usbhsehci {
-	phys = <&hsusb2_phy>;
-};
-
-&usbhshost {
-	port1-mode = "ohci-phy-4pin-dpdm";
-	port2-mode = "ehci-tll";
-};
-
-/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-
-	/*
-	 * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4.
-	 * VBUS Regulator Main Characteristics". Binding uses 2 mA units.
-	 */
-	power = <150>;
-};
-
-&i2c4 {
-	ak8975: magnetometer@c {
-		compatible = "asahi-kasei,ak8975";
-		reg = <0x0c>;
-
-		vdd-supply = <&vhvio>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
-
-		rotation-matrix = "-1", "0", "0",
-				  "0", "1", "0",
-				  "0", "0", "-1";
-
-	};
-};
-
-&mcbsp2 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-
-	mcbsp2_port: port {
-		cpu_dai2: endpoint {
-			dai-format = "i2s";
-			remote-endpoint = <&cpcap_audio_codec0>;
-			frame-master = <&cpcap_audio_codec0>;
-			bitclock-master = <&cpcap_audio_codec0>;
-		};
-	};
-};
-
-&mcbsp3 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp3_pins>;
-	status = "okay";
-
-	mcbsp3_port: port {
-		cpu_dai3: endpoint {
-			dai-format = "dsp_a";
-			frame-master = <&cpcap_audio_codec1>;
-			bitclock-master = <&cpcap_audio_codec1>;
-			remote-endpoint = <&cpcap_audio_codec1>;
-		};
-	};
-};
-
-&cpcap_audio_codec0 {
-	remote-endpoint = <&cpu_dai2>;
-};
-
-&cpcap_audio_codec1 {
-	remote-endpoint = <&cpu_dai3>;
-};
diff --git a/arch/arm/boot/dts/moxa/Makefile b/arch/arm/boot/dts/moxa/Makefile
new file mode 100644
index 0000000000000..d61ce8d4e732e
--- /dev/null
+++ b/arch/arm/boot/dts/moxa/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MOXART) += \
+	moxart-uc7112lx.dtb
diff --git a/arch/arm/boot/dts/moxa/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxa/moxart-uc7112lx.dts
new file mode 100644
index 0000000000000..e07b807b4cec5
--- /dev/null
+++ b/arch/arm/boot/dts/moxa/moxart-uc7112lx.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX
+ *
+ * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
+ */
+
+/dts-v1/;
+#include "moxart.dtsi"
+
+/ {
+	model = "MOXA UC-7112-LX";
+	compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	clocks {
+		ref12: ref12M {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+	};
+
+	flash@80000000,0 {
+		compatible = "numonyx,js28f128", "cfi-flash";
+		reg = <0x80000000 0x1000000>;
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0x40000>;
+		};
+		partition@40000 {
+			label = "linux kernel";
+			reg = <0x40000 0x1C0000>;
+		};
+		partition@200000 {
+			label = "root filesystem";
+			reg = <0x200000 0x800000>;
+		};
+		partition@a00000 {
+			label = "user filesystem";
+			reg = <0xa00000 0x600000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		user-led {
+			label = "ready-led";
+			gpios = <&gpio 27 0x1>;
+			default-state = "on";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio_keys_polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <500>;
+		button@25 {
+			label = "GPIO Reset";
+			linux,code = <116>;
+			gpios = <&gpio 25 1>;
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait";
+	};
+};
+
+&clk_pll {
+	clocks = <&ref12>;
+};
+
+&mmc {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/moxa/moxart.dtsi b/arch/arm/boot/dts/moxa/moxart.dtsi
new file mode 100644
index 0000000000000..11cbea5b94d2f
--- /dev/null
+++ b/arch/arm/boot/dts/moxa/moxart.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC
+ *
+ * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "moxa,moxart";
+	model = "MOXART";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "faraday,fa526";
+			reg = <0>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x90000000 0x10000000>;
+		ranges;
+
+		intc: interrupt-controller@98800000 {
+			compatible = "moxa,moxart-ic", "faraday,ftintc010";
+			reg = <0x98800000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-mask = <0x00080000>;
+		};
+
+		clk_pll: clk_pll@98100000 {
+			compatible = "moxa,moxart-pll-clock";
+			#clock-cells = <0>;
+			reg = <0x98100000 0x34>;
+		};
+
+		clk_apb: clk_apb@98100000 {
+			compatible = "moxa,moxart-apb-clock";
+			#clock-cells = <0>;
+			reg = <0x98100000 0x34>;
+			clocks = <&clk_pll>;
+		};
+
+		timer: timer@98400000 {
+			compatible = "moxa,moxart-timer", "faraday,fttmr010";
+			reg = <0x98400000 0x42>;
+			interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk_apb>;
+			clock-names = "PCLK";
+		};
+
+		gpio: gpio@98700000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			compatible = "moxa,moxart-gpio", "faraday,ftgpio010";
+			reg = <0x98700000 0x100>;
+		};
+
+		rtc: rtc {
+			compatible = "moxa,moxart-rtc";
+			gpio-rtc-sclk = <&gpio 5 0>;
+			gpio-rtc-data = <&gpio 6 0>;
+			gpio-rtc-reset = <&gpio 7 0>;
+		};
+
+		dma: dma@90500000 {
+			compatible = "moxa,moxart-dma";
+			reg = <0x90500080 0x40>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+		};
+
+		watchdog: watchdog@98500000 {
+			compatible = "moxa,moxart-watchdog", "faraday,ftwdt010";
+			reg = <0x98500000 0x10>;
+			clocks = <&clk_apb>;
+			clock-names = "PCLK";
+		};
+
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
+			reg = <0x98e00000 0x5C>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_apb>;
+			dmas =  <&dma 5>,
+				<&dma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mdio0: mdio@90900090 {
+			compatible = "moxa,moxart-mdio";
+			reg = <0x90900090 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mdio1: mdio@92000090 {
+			compatible = "moxa,moxart-mdio";
+			reg = <0x92000090 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mac0: mac@90900000 {
+			compatible = "moxa,moxart-mac";
+			reg = <0x90900000 0x90>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			phy-handle = <&ethphy0>;
+			phy-mode = "mii";
+			status = "disabled";
+		};
+
+		mac1: mac@92000000 {
+			compatible = "moxa,moxart-mac";
+			reg = <0x92000000 0x90>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			phy-handle = <&ethphy1>;
+			phy-mode = "mii";
+			status = "disabled";
+		};
+
+		uart0: serial@98200000 {
+			compatible = "ns16550a";
+			reg = <0x98200000 0x20>;
+			interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <14745600>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
deleted file mode 100644
index e07b807b4cec5..0000000000000
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX
- *
- * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
- */
-
-/dts-v1/;
-#include "moxart.dtsi"
-
-/ {
-	model = "MOXA UC-7112-LX";
-	compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart";
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x2000000>;
-	};
-
-	clocks {
-		ref12: ref12M {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-	};
-
-	flash@80000000,0 {
-		compatible = "numonyx,js28f128", "cfi-flash";
-		reg = <0x80000000 0x1000000>;
-		bank-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0x40000>;
-		};
-		partition@40000 {
-			label = "linux kernel";
-			reg = <0x40000 0x1C0000>;
-		};
-		partition@200000 {
-			label = "root filesystem";
-			reg = <0x200000 0x800000>;
-		};
-		partition@a00000 {
-			label = "user filesystem";
-			reg = <0xa00000 0x600000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		user-led {
-			label = "ready-led";
-			gpios = <&gpio 27 0x1>;
-			default-state = "on";
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	gpio_keys_polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <500>;
-		button@25 {
-			label = "GPIO Reset";
-			linux,code = <116>;
-			gpios = <&gpio 25 1>;
-		};
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait";
-	};
-};
-
-&clk_pll {
-	clocks = <&ref12>;
-};
-
-&mmc {
-	status = "okay";
-};
-
-&mdio0 {
-	status = "okay";
-
-	ethphy0: ethernet-phy@1 {
-		device_type = "ethernet-phy";
-		compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&mdio1 {
-	status = "okay";
-
-	ethphy1: ethernet-phy@1 {
-		device_type = "ethernet-phy";
-		compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&mac0 {
-	status = "okay";
-};
-
-&mac1 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
deleted file mode 100644
index 11cbea5b94d2f..0000000000000
--- a/arch/arm/boot/dts/moxart.dtsi
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC
- *
- * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "moxa,moxart";
-	model = "MOXART";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "faraday,fa526";
-			reg = <0>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x90000000 0x10000000>;
-		ranges;
-
-		intc: interrupt-controller@98800000 {
-			compatible = "moxa,moxart-ic", "faraday,ftintc010";
-			reg = <0x98800000 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-mask = <0x00080000>;
-		};
-
-		clk_pll: clk_pll@98100000 {
-			compatible = "moxa,moxart-pll-clock";
-			#clock-cells = <0>;
-			reg = <0x98100000 0x34>;
-		};
-
-		clk_apb: clk_apb@98100000 {
-			compatible = "moxa,moxart-apb-clock";
-			#clock-cells = <0>;
-			reg = <0x98100000 0x34>;
-			clocks = <&clk_pll>;
-		};
-
-		timer: timer@98400000 {
-			compatible = "moxa,moxart-timer", "faraday,fttmr010";
-			reg = <0x98400000 0x42>;
-			interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
-			clocks = <&clk_apb>;
-			clock-names = "PCLK";
-		};
-
-		gpio: gpio@98700000 {
-			gpio-controller;
-			#gpio-cells = <2>;
-			compatible = "moxa,moxart-gpio", "faraday,ftgpio010";
-			reg = <0x98700000 0x100>;
-		};
-
-		rtc: rtc {
-			compatible = "moxa,moxart-rtc";
-			gpio-rtc-sclk = <&gpio 5 0>;
-			gpio-rtc-data = <&gpio 6 0>;
-			gpio-rtc-reset = <&gpio 7 0>;
-		};
-
-		dma: dma@90500000 {
-			compatible = "moxa,moxart-dma";
-			reg = <0x90500080 0x40>;
-			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-		};
-
-		watchdog: watchdog@98500000 {
-			compatible = "moxa,moxart-watchdog", "faraday,ftwdt010";
-			reg = <0x98500000 0x10>;
-			clocks = <&clk_apb>;
-			clock-names = "PCLK";
-		};
-
-		mmc: mmc@98e00000 {
-			compatible = "moxa,moxart-mmc";
-			reg = <0x98e00000 0x5C>;
-			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_apb>;
-			dmas =  <&dma 5>,
-				<&dma 5>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mdio0: mdio@90900090 {
-			compatible = "moxa,moxart-mdio";
-			reg = <0x90900090 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mdio1: mdio@92000090 {
-			compatible = "moxa,moxart-mdio";
-			reg = <0x92000090 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mac0: mac@90900000 {
-			compatible = "moxa,moxart-mac";
-			reg = <0x90900000 0x90>;
-			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
-			phy-handle = <&ethphy0>;
-			phy-mode = "mii";
-			status = "disabled";
-		};
-
-		mac1: mac@92000000 {
-			compatible = "moxa,moxart-mac";
-			reg = <0x92000000 0x90>;
-			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
-			phy-handle = <&ethphy1>;
-			phy-mode = "mii";
-			status = "disabled";
-		};
-
-		uart0: serial@98200000 {
-			compatible = "ns16550a";
-			reg = <0x98200000 0x20>;
-			interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <14745600>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts
deleted file mode 100644
index 005c2758e229c..0000000000000
--- a/arch/arm/boot/dts/mpa1600.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * mpa1600.dts - Device Tree file for Phontech MPA 1600
- *
- *  Copyright (C) 2013 Joachim Eastwood <manabian@gmail.com>
- */
-/dts-v1/;
-#include "at91rm9200.dtsi"
-
-/ {
-	model = "Phontech MPA 1600";
-	compatible = "phontech,mpa1600", "atmel,at91rm9200";
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			macb0: ethernet@fffbc000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			ssc0: ssc@fffd0000 {
-				status = "okay";
-			};
-
-			ssc1: ssc@fffd4000 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@300000 {
-			num-ports = <1>;
-			status = "okay";
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		monitor_mute {
-			label = "Monitor mute";
-			gpios = <&pioC 1 GPIO_ACTIVE_LOW>;
-			linux,code = <113>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mps2-an385.dts b/arch/arm/boot/dts/mps2-an385.dts
deleted file mode 100644
index aebbebfc25d11..0000000000000
--- a/arch/arm/boot/dts/mps2-an385.dts
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (C) 2015 ARM Limited
- *
- * Author: Vladimir Murzin <vladimir.murzin@arm.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "mps2.dtsi"
-
-/ {
-	model = "ARM MPS2 Application Note 385/386";
-	compatible = "arm,mps2";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		bootargs = "earlycon";
-		stdout-path = "serial0:9600n8";
-	};
-
-	memory@21000000 {
-		device_type = "memory";
-		reg = <0x21000000 0x1000000>;
-	};
-
-	smb {
-		ethernet@0,0 {
-			compatible = "smsc,lan9220", "smsc,lan9115";
-			reg = <0 0x0 0x10000>;
-			interrupts = <13>;
-			interrupt-parent = <&nvic>;
-			smsc,irq-active-high;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&timer0 {
-	status = "okay";
-};
-
-&timer1 {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mps2-an399.dts b/arch/arm/boot/dts/mps2-an399.dts
deleted file mode 100644
index 349abf70b2a58..0000000000000
--- a/arch/arm/boot/dts/mps2-an399.dts
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (C) 2015 ARM Limited
- *
- * Author: Vladimir Murzin <vladimir.murzin@arm.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "mps2.dtsi"
-
-/ {
-	model = "ARM MPS2 Application Note 399/400";
-	compatible = "arm,mps2";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		bootargs = "earlycon";
-		stdout-path = "serial0:9600n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x1000000>;
-	};
-
-	smb {
-		ethernet@1,0 {
-			compatible = "smsc,lan9220", "smsc,lan9115";
-			reg = <1 0x0 0x10000>;
-			interrupts = <13>;
-			interrupt-parent = <&nvic>;
-			smsc,irq-active-high;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&timer0 {
-	status = "okay";
-};
-
-&timer1 {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
deleted file mode 100644
index b99577d411b19..0000000000000
--- a/arch/arm/boot/dts/mps2.dtsi
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * Copyright (C) 2015 ARM Limited
- *
- * Author: Vladimir Murzin <vladimir.murzin@arm.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "armv7-m.dtsi"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	oscclk0: clk-osc0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-	};
-
-	oscclk1: clk-osc1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	oscclk2: clk-osc2 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	cfgclk: clk-cfg {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <5000000>;
-	};
-
-	spicfgclk: clk-spicfg {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <75000000>;
-	};
-
-	sysclk: clk-sys {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	audmclk: clk-audm {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk1>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	audsclk: clk-auds {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk1>;
-		#clock-cells = <0>;
-		clock-div = <8>;
-		clock-mult = <1>;
-	};
-
-	spiclcd: clk-cpiclcd {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	spicon: clk-spicon {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	i2cclcd: clk-i2cclcd {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	i2caud: clk-i2caud {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		ranges;
-
-		apb@40000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x40000000 0x10000>;
-
-			timer0: mps2-timer0@0 {
-				compatible = "arm,mps2-timer";
-				reg = <0x0 0x1000>;
-				interrupts = <8>;
-				clocks = <&sysclk>;
-				status = "disabled";
-			};
-
-			timer1: mps2-timer1@1000 {
-				compatible = "arm,mps2-timer";
-				reg = <0x1000 0x1000>;
-				interrupts = <9>;
-				clocks = <&sysclk>;
-				status = "disabled";
-			};
-
-			timer2: dual-timer@2000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x2000 0x1000>;
-				clocks = <&sysclk>, <&sysclk>, <&sysclk>;
-				clock-names = "timer0clk", "timer1clk",
-					       "apb_pclk";
-				interrupts = <10>;
-				status = "disabled";
-			};
-
-			uart0: serial@4000 {
-				compatible = "arm,mps2-uart";
-				reg = <0x4000 0x1000>;
-				interrupts = <0>, <1>, <12>;
-				clocks = <&sysclk>;
-				status = "disabled";
-			};
-
-			uart1: serial@5000 {
-				compatible = "arm,mps2-uart";
-				reg = <0x5000 0x1000>;
-				interrupts = <2>, <3>, <12>;
-				clocks = <&sysclk>;
-				status = "disabled";
-			};
-
-			uart2: serial@6000 {
-				compatible = "arm,mps2-uart";
-				reg = <0x6000 0x1000>;
-				interrupts = <4>, <5>, <12>;
-				clocks = <&sysclk>;
-				status = "disabled";
-			};
-
-			wdt: watchdog@8000 {
-				compatible = "arm,sp805", "arm,primecell";
-				arm,primecell-periphid = <0x00141805>;
-				reg = <0x8000 0x1000>;
-				interrupts = <0>;
-				clocks = <&sysclk>, <&sysclk>;
-				clock-names = "wdog_clk", "apb_pclk";
-				status = "disabled";
-			};
-		};
-	};
-
-	fpga@40020000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x40020000 0x10000>;
-
-		fpgaio@8000 {
-			compatible = "syscon", "simple-mfd";
-			reg = <0x8000 0x10>;
-
-			ranges = <0x0 0x8000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			led@0,0 {
-				compatible = "register-bit-led";
-				reg = <0x00 0x04>;
-				offset = <0x0>;
-				mask = <0x01>;
-				label = "userled:0";
-				linux,default-trigger = "heartbeat";
-				default-state = "on";
-			};
-
-			led@0,1 {
-				compatible = "register-bit-led";
-				reg = <0x00 0x04>;
-				offset = <0x0>;
-				mask = <0x02>;
-				label = "userled:1";
-				linux,default-trigger = "usr";
-				default-state = "off";
-			};
-		};
-	};
-
-	smb {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x40200000 0x10000>,
-			 <1 0 0xa0000000 0x10000>;
-	};
-};
diff --git a/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi b/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi
deleted file mode 100644
index 507ff2fba8372..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	vcc_core: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_core";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-boot-on;
-	};
-
-	vcc_dram: fixedregulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_dram";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-	};
-
-	vcc_io: fixedregulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_io";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		red {
-			gpios = <&gpio MSC313_GPIO_SR_IO16 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "activity";
-		};
-		yellow {
-			gpios = <&gpio MSC313_GPIO_SR_IO17 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&vcc_core>;
-};
diff --git a/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts
deleted file mode 100644
index db4910dcb8a70..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-/dts-v1/;
-#include "mstar-infinity-msc313.dtsi"
-#include "mstar-infinity-breadbee-common.dtsi"
-
-/ {
-	model = "BreadBee Crust";
-	compatible = "thingyjp,breadbee-crust", "mstar,infinity";
-
-	aliases {
-		serial0 = &pm_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&pm_uart {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mstar-infinity-msc313.dtsi b/arch/arm/boot/dts/mstar-infinity-msc313.dtsi
deleted file mode 100644
index 3499fde263bee..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity-msc313.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include "mstar-infinity.dtsi"
-
-/ {
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x4000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/mstar-infinity.dtsi b/arch/arm/boot/dts/mstar-infinity.dtsi
deleted file mode 100644
index 441a917b88baf..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity.dtsi
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include "mstar-v7.dtsi"
-
-#include <dt-bindings/gpio/msc313-gpio.h>
-
-/ {
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-240000000 {
-			opp-hz = /bits/ 64 <240000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <300000>;
-		};
-
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <300000>;
-		};
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <300000>;
-		};
-
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <300000>;
-		};
-	};
-};
-
-&cpu0 {
-	operating-points-v2 = <&cpu0_opp_table>;
-};
-
-&imi {
-	reg = <0xa0000000 0x16000>;
-};
-
-&gpio {
-	compatible = "mstar,msc313-gpio";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
deleted file mode 100644
index 34df472fed716..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2021 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- * Author: Romain Perier <romain.perier@gmail.com>
- */
-
-/ {
-	reg_vcc_dram: regulator-vcc-dram {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_dram";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-	};
-};
-
-&pm_uart {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
deleted file mode 100644
index f25a04c98ccb1..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2021 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-/dts-v1/;
-#include "mstar-infinity2m-ssd202d.dtsi"
-
-/ {
-	model = "DongShanPi One";
-	compatible = "100ask,dongshanpione", "mstar,infinity2m";
-
-	aliases {
-		serial0 = &pm_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&pm_uart {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts
deleted file mode 100644
index 1bbbf47132dc5..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2021 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-/dts-v1/;
-#include "mstar-infinity2m-ssd202d.dtsi"
-
-/ {
-	model = "Miyoo Mini";
-	compatible = "miyoo,miyoo-mini", "mstar,infinity2m";
-
-	aliases {
-		serial0 = &pm_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&pm_uart {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-ssd201htv2.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-ssd201htv2.dts
deleted file mode 100644
index 5d81641414a21..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-ssd201htv2.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-/dts-v1/;
-#include "mstar-infinity2m-ssd202d.dtsi"
-
-/ {
-	model = "SSD201_HT_V2";
-	compatible = "honestar,ssd201htv2", "mstar,infinity2m";
-
-	aliases {
-		serial0 = &pm_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&pm_uart {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts
deleted file mode 100644
index a81684002e45d..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2021 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-/dts-v1/;
-#include "mstar-infinity2m-ssd202d.dtsi"
-
-/ {
-	model = "UnitV2";
-	compatible = "m5stack,unitv2", "mstar,infinity2m";
-
-	aliases {
-		serial0 = &pm_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&pm_uart {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
deleted file mode 100644
index b15c40762bc0a..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2021 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- * Author: Romain Perier <romain.perier@gmail.com>
- */
-
-/dts-v1/;
-#include "mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Wireless Tag IDO-SBC2D06-1VB-22W";
-	compatible = "wirelesstag,ido-sbc2d06-v1b-22w", "mstar,infinity2m";
-
-	leds {
-		compatible = "gpio-leds";
-		sys_led {
-			gpios = <&gpio SSD20XD_GPIO_GPIO85 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
deleted file mode 100644
index d877aff850337..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2021 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- * Author: Romain Perier <romain.perier@gmail.com>
- */
-
-/dts-v1/;
-#include "mstar-infinity2m-ssd202d.dtsi"
-#include "mstar-infinity2m-ssd201-som2d01.dtsi"
-
-/ {
-	model = "Wireless Tag IDO-SOM2D01 (SSD202D)";
-	compatible = "wirelesstag,ido-som2d01", "mstar,infinity2m";
-
-	aliases {
-		serial0 = &pm_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&reg_vcc_dram {
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
-};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd202d.dtsi
deleted file mode 100644
index 176e10a298968..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include "mstar-infinity2m-ssd20xd.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x20000000 0x8000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
deleted file mode 100644
index 6f067da61ba3e..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include "mstar-infinity2m.dtsi"
-
-&gpio {
-	compatible = "sstar,ssd20xd-gpio";
-	status = "okay";
-};
-
-&smpctrl {
-	compatible = "sstar,ssd201-smpctrl", "mstar,smpctrl";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mstar-infinity2m.dtsi b/arch/arm/boot/dts/mstar-infinity2m.dtsi
deleted file mode 100644
index 1b485efd7156c..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity2m.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include "mstar-infinity.dtsi"
-
-&cpu0_opp_table {
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <300000>;
-		};
-
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <300000>;
-		};
-};
-
-&cpus {
-	cpu1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		operating-points-v2 = <&cpu0_opp_table>;
-		reg = <0x1>;
-		clocks = <&cpupll>;
-		clock-names = "cpuclk";
-	};
-};
-
-&riu {
-	smpctrl: smpctrl@204000 {
-		reg = <0x204000 0x200>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts
deleted file mode 100644
index e64ca4ce18301..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-/dts-v1/;
-#include "mstar-infinity3-msc313e.dtsi"
-#include "mstar-infinity-breadbee-common.dtsi"
-
-/ {
-	model = "BreadBee";
-	compatible = "thingyjp,breadbee", "mstar,infinity3";
-
-	aliases {
-		serial0 = &pm_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&pm_uart {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi b/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi
deleted file mode 100644
index f581b6f89555c..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include "mstar-infinity3.dtsi"
-
-/ {
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x4000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/mstar-infinity3.dtsi b/arch/arm/boot/dts/mstar-infinity3.dtsi
deleted file mode 100644
index a56cf29e5d823..0000000000000
--- a/arch/arm/boot/dts/mstar-infinity3.dtsi
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include "mstar-infinity.dtsi"
-
-&cpu0_opp_table {
-	opp-1008000000 {
-		opp-hz = /bits/ 64 <1008000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <300000>;
-	};
-
-	// overclock frequencies below, shown to work fine up to 1.3 GHz
-	opp-108000000 {
-		opp-hz = /bits/ 64 <1080000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <300000>;
-		turbo-mode;
-	};
-
-	opp-1188000000 {
-		opp-hz = /bits/ 64 <1188000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <300000>;
-		turbo-mode;
-	};
-
-	opp-1296000000 {
-		opp-hz = /bits/ 64 <1296000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <300000>;
-		turbo-mode;
-	};
-
-	opp-1350000000 {
-		opp-hz = /bits/ 64 <1350000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <300000>;
-		turbo-mode;
-	};
-
-	opp-1404000000 {
-		opp-hz = /bits/ 64 <1404000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <300000>;
-		turbo-mode;
-	};
-
-	opp-1458000000 {
-		opp-hz = /bits/ 64 <1458000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <300000>;
-		turbo-mode;
-	};
-
-	opp-1512000000 {
-		opp-hz = /bits/ 64 <1512000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <300000>;
-		turbo-mode;
-	};
-};
-
-&imi {
-	reg = <0xa0000000 0x20000>;
-};
diff --git a/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts b/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts
deleted file mode 100644
index 7306b737d9c49..0000000000000
--- a/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-/dts-v1/;
-#include "mstar-mercury5-ssc8336n.dtsi"
-
-/ {
-	model = "70mai Midrive D08";
-	compatible = "70mai,midrived08", "mstar,mercury5";
-
-	aliases {
-		serial0 = &pm_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&pm_uart {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi b/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi
deleted file mode 100644
index 3f5a4c029744b..0000000000000
--- a/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include "mstar-mercury5.dtsi"
-
-/ {
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x4000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/mstar-mercury5.dtsi b/arch/arm/boot/dts/mstar-mercury5.dtsi
deleted file mode 100644
index a7d0dd9d61324..0000000000000
--- a/arch/arm/boot/dts/mstar-mercury5.dtsi
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include "mstar-v7.dtsi"
-
-&imi {
-	reg = <0xa0000000 0x20000>;
-};
diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
deleted file mode 100644
index 3eeafd8c71212..0000000000000
--- a/arch/arm/boot/dts/mstar-v7.dtsi
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/mstar-msc313-mpll.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			clocks = <&cpupll>;
-			clock-names = "cpuclk";
-		};
-	};
-
-	arch_timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2)
-				| IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2)
-				| IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2)
-				| IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2)
-				| IRQ_TYPE_LEVEL_LOW)>;
-		/*
-		 * we shouldn't need this but the vendor
-		 * u-boot is broken
-		 */
-		clock-frequency = <6000000>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>;
-	};
-
-	clocks: clocks {
-		xtal: xtal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-
-		rtc_xtal: rtc_xtal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			status = "disabled";
-		};
-
-		xtal_div2: xtal_div2 {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&xtal>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x16001000 0x16001000 0x00007000>,
-			 <0x1f000000 0x1f000000 0x00400000>,
-			 <0xa0000000 0xa0000000 0x20000>;
-
-		gic: interrupt-controller@16001000 {
-			compatible = "arm,cortex-a7-gic";
-			reg = <0x16001000 0x1000>,
-			      <0x16002000 0x2000>,
-			      <0x16004000 0x2000>,
-			      <0x16006000 0x2000>;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2)
-					| IRQ_TYPE_LEVEL_LOW)>;
-		};
-
-		riu: bus@1f000000 {
-			compatible = "simple-bus";
-			reg = <0x1f000000 0x00400000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1f000000 0x00400000>;
-
-			pmsleep: syscon@1c00 {
-				compatible = "mstar,msc313-pmsleep", "syscon";
-				reg = <0x1c00 0x100>;
-			};
-
-			reboot {
-				compatible = "syscon-reboot";
-				regmap = <&pmsleep>;
-				offset = <0xb8>;
-				mask = <0x79>;
-			};
-
-			rtc@2400 {
-				compatible = "mstar,msc313-rtc";
-				reg = <0x2400 0x40>;
-				clocks = <&xtal_div2>;
-				interrupts-extended = <&intc_irq GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			watchdog@6000 {
-				compatible = "mstar,msc313e-wdt";
-				reg = <0x6000 0x1f>;
-				clocks = <&xtal_div2>;
-			};
-
-
-			intc_fiq: interrupt-controller@201310 {
-				compatible = "mstar,mst-intc";
-				reg = <0x201310 0x40>;
-				#interrupt-cells = <3>;
-				interrupt-controller;
-				interrupt-parent = <&gic>;
-				mstar,irqs-map-range = <96 127>;
-			};
-
-			intc_irq: interrupt-controller@201350 {
-				compatible = "mstar,mst-intc";
-				reg = <0x201350 0x40>;
-				#interrupt-cells = <3>;
-				interrupt-controller;
-				interrupt-parent = <&gic>;
-				mstar,irqs-map-range = <32 95>;
-				mstar,intc-no-eoi;
-			};
-
-			l3bridge: l3bridge@204400 {
-				compatible = "mstar,l3bridge";
-				reg = <0x204400 0x200>;
-			};
-
-			mpll: mpll@206000 {
-				compatible = "mstar,msc313-mpll";
-				#clock-cells = <1>;
-				reg = <0x206000 0x200>;
-				clocks = <&xtal>;
-			};
-
-			cpupll: cpupll@206400 {
-				compatible = "mstar,msc313-cpupll";
-				reg = <0x206400 0x200>;
-				#clock-cells = <0>;
-				clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
-			};
-
-			gpio: gpio@207800 {
-				#gpio-cells = <2>;
-				reg = <0x207800 0x200>;
-				gpio-controller;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				interrupt-parent = <&intc_fiq>;
-				status = "disabled";
-			};
-
-			pm_uart: serial@221000 {
-				compatible = "ns16550a";
-				reg = <0x221000 0x100>;
-				reg-shift = <3>;
-				interrupts-extended = <&intc_irq GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <172000000>;
-				status = "disabled";
-			};
-		};
-
-		imi: sram@a0000000 {
-			compatible = "mmio-sram";
-			reg = <0xa0000000 0x10000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
deleted file mode 100644
index d1535f385f361..0000000000000
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ /dev/null
@@ -1,253 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2015 MediaTek Inc.
- * Author: Erin Lo <erin.lo@mediatek.com>
- *
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "mt2701.dtsi"
-
-/ {
-	model = "MediaTek MT2701 evaluation board";
-	compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-
-	sound:sound {
-		compatible = "mediatek,mt2701-cs42448-machine";
-		mediatek,platform = <&afe>;
-		/* CS42448 Machine name */
-		audio-routing =
-		"Line Out Jack", "AOUT1L",
-		"Line Out Jack", "AOUT1R",
-		"Line Out Jack", "AOUT2L",
-		"Line Out Jack", "AOUT2R",
-		"Line Out Jack", "AOUT3L",
-		"Line Out Jack", "AOUT3R",
-		"Line Out Jack", "AOUT4L",
-		"Line Out Jack", "AOUT4R",
-		"AIN1L", "AMIC",
-		"AIN1R", "AMIC",
-		"AIN2L", "Tuner In",
-		"AIN2R", "Tuner In",
-		"AIN3L", "Satellite Tuner In",
-		"AIN3R", "Satellite Tuner In",
-		"AIN3L", "AUX In",
-		"AIN3R", "AUX In";
-		mediatek,audio-codec = <&cs42448>;
-		mediatek,audio-codec-bt-mrg = <&bt_sco_codec>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&aud_pins_default>;
-		i2s1-in-sel-gpio1 = <&pio 53 0>;
-		i2s1-in-sel-gpio2 = <&pio 54 0>;
-		status = "okay";
-	};
-
-	bt_sco_codec:bt_sco_codec {
-		compatible = "linux,bt-sco";
-	};
-
-	backlight_lcd: backlight_lcd {
-		compatible = "pwm-backlight";
-		pwms = <&bls 0 100000>;
-		brightness-levels = <
-			  0  16  32  48  64  80  96 112
-			128 144 160 176 192 208 224 240
-			255
-		>;
-		default-brightness-level = <9>;
-	};
-
-	usb_vbus: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&pio 45 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&auxadc {
-	status = "okay";
-};
-
-&bls {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm_bls_gpio>;
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
-	status = "okay";
-	cs42448: cs42448@48 {
-		compatible = "cirrus,cs42448";
-		reg = <0x48>;
-		clocks = <&topckgen CLK_TOP_AUD_I2S1_MCLK>;
-		clock-names = "mclk";
-	};
-};
-
-&pio {
-	i2c0_pins_a: i2c0@0 {
-		pins1 {
-			pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>,
-				 <MT2701_PIN_76_SCL0__FUNC_SCL0>;
-			bias-disable;
-		};
-	};
-
-	i2c1_pins_a: i2c1@0 {
-		pins1 {
-			pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>,
-				 <MT2701_PIN_58_SCL1__FUNC_SCL1>;
-			bias-disable;
-		};
-	};
-
-	i2c2_pins_a: i2c2@0 {
-		pins1 {
-			pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>,
-				 <MT2701_PIN_78_SCL2__FUNC_SCL2>;
-			bias-disable;
-		};
-	};
-
-	pwm_bls_gpio: pwm_bls_gpio {
-		pins_cmd_dat {
-			pinmux = <MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM>;
-		};
-	};
-
-	spi_pins_a: spi0@0 {
-		pins_spi {
-			pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>,
-				 <MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK>,
-				 <MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI>,
-				 <MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO>;
-			bias-disable;
-		};
-	};
-
-	aud_pins_default: audiodefault {
-		pins_cmd_dat {
-			pinmux = <MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA>,
-				 <MT2701_PIN_72_I2S0_DATA_IN__FUNC_I2S0_DATA_IN>,
-				 <MT2701_PIN_73_I2S0_LRCK__FUNC_I2S0_LRCK>,
-				 <MT2701_PIN_74_I2S0_BCK__FUNC_I2S0_BCK>,
-				 <MT2701_PIN_126_I2S0_MCLK__FUNC_I2S0_MCLK>,
-				 <MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA>,
-				 <MT2701_PIN_34_I2S1_DATA_IN__FUNC_I2S1_DATA_IN>,
-				 <MT2701_PIN_35_I2S1_BCK__FUNC_I2S1_BCK>,
-				 <MT2701_PIN_36_I2S1_LRCK__FUNC_I2S1_LRCK>,
-				 <MT2701_PIN_37_I2S1_MCLK__FUNC_I2S1_MCLK>,
-				 <MT2701_PIN_203_PWM0__FUNC_I2S2_DATA>,
-				 <MT2701_PIN_204_PWM1__FUNC_I2S3_DATA>,
-				 <MT2701_PIN_53_SPI0_CSN__FUNC_GPIO53>,
-				 <MT2701_PIN_54_SPI0_CK__FUNC_GPIO54>,
-				 <MT2701_PIN_18_PCM_CLK__FUNC_MRG_CLK>,
-				 <MT2701_PIN_19_PCM_SYNC__FUNC_MRG_SYNC>,
-				 <MT2701_PIN_20_PCM_RX__FUNC_MRG_TX>,
-				 <MT2701_PIN_21_PCM_TX__FUNC_MRG_RX>;
-			drive-strength = <MTK_DRIVE_12mA>;
-			bias-pull-down;
-		};
-	};
-
-	spi_pins_b: spi1@0 {
-		pins_spi {
-			pinmux = <MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS>,
-				 <MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI>,
-				 <MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO>,
-				 <MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK>;
-			bias-disable;
-		};
-	};
-
-	spi_pins_c: spi2@0 {
-		pins_spi {
-			pinmux = <MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS>,
-				 <MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI>,
-				 <MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO>,
-				 <MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK>;
-			bias-disable;
-		};
-	};
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_pins_a>;
-	status = "disabled";
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_pins_b>;
-	status = "disabled";
-};
-
-&spi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_pins_c>;
-	status = "disabled";
-};
-
-&nor_flash {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nor_pins_default>;
-	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-	};
-};
-
-&pio {
-	nor_pins_default: nor {
-		pins1 {
-			pinmux = <MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS>,
-				 <MT2701_PIN_241_EXT_SCK__FUNC_EXT_SCK>,
-				 <MT2701_PIN_239_EXT_SDIO0__FUNC_EXT_SDIO0>,
-				 <MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1>,
-				 <MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2>,
-				 <MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3>;
-			drive-strength = <MTK_DRIVE_4mA>;
-			bias-pull-up;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-	usb-role-switch;
-	connector{
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
-		vbus-supply = <&usb_vbus>;
-	};
-};
diff --git a/arch/arm/boot/dts/mt2701-pinfunc.h b/arch/arm/boot/dts/mt2701-pinfunc.h
deleted file mode 100644
index 136a25a0ae283..0000000000000
--- a/arch/arm/boot/dts/mt2701-pinfunc.h
+++ /dev/null
@@ -1,727 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2015 MediaTek Inc.
- * Author: Biao Huang <biao.huang@mediatek.com>
- */
-
-#ifndef __DTS_MT2701_PINFUNC_H
-#define __DTS_MT2701_PINFUNC_H
-
-#include <dt-bindings/pinctrl/mt65xx.h>
-
-#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
-#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(0) | 1)
-#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDI (MTK_PIN_NO(0) | 2)
-
-#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
-#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(1) | 1)
-#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDO (MTK_PIN_NO(1) | 2)
-
-#define MT2701_PIN_2_PWRAP_INT__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
-#define MT2701_PIN_2_PWRAP_INT__FUNC_PWRAP_INT (MTK_PIN_NO(2) | 1)
-
-#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
-#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(3) | 1)
-
-#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
-#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(4) | 1)
-
-#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
-#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_PWRAP_SPICK2_I (MTK_PIN_NO(5) | 1)
-#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_ANT_SEL1 (MTK_PIN_NO(5) | 5)
-
-#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
-#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_PWRAP_SPICS2_B_I (MTK_PIN_NO(6) | 1)
-#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_ANT_SEL0 (MTK_PIN_NO(6) | 5)
-#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_DBG_MON_A_0 (MTK_PIN_NO(6) | 7)
-
-#define MT2701_PIN_7_SPI1_CSN__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
-#define MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS (MTK_PIN_NO(7) | 1)
-#define MT2701_PIN_7_SPI1_CSN__FUNC_KCOL0 (MTK_PIN_NO(7) | 4)
-#define MT2701_PIN_7_SPI1_CSN__FUNC_DBG_MON_B_12 (MTK_PIN_NO(7) | 7)
-
-#define MT2701_PIN_8_SPI1_MI__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
-#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI (MTK_PIN_NO(8) | 1)
-#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MO (MTK_PIN_NO(8) | 2)
-#define MT2701_PIN_8_SPI1_MI__FUNC_KCOL1 (MTK_PIN_NO(8) | 4)
-#define MT2701_PIN_8_SPI1_MI__FUNC_DBG_MON_B_13 (MTK_PIN_NO(8) | 7)
-
-#define MT2701_PIN_9_SPI1_MO__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
-#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO (MTK_PIN_NO(9) | 1)
-#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MI (MTK_PIN_NO(9) | 2)
-#define MT2701_PIN_9_SPI1_MO__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3)
-#define MT2701_PIN_9_SPI1_MO__FUNC_KCOL2 (MTK_PIN_NO(9) | 4)
-#define MT2701_PIN_9_SPI1_MO__FUNC_DBG_MON_B_14 (MTK_PIN_NO(9) | 7)
-
-#define MT2701_PIN_10_RTC32K_CK__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
-#define MT2701_PIN_10_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(10) | 1)
-
-#define MT2701_PIN_11_WATCHDOG__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
-#define MT2701_PIN_11_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(11) | 1)
-
-#define MT2701_PIN_12_SRCLKENA__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
-#define MT2701_PIN_12_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(12) | 1)
-
-#define MT2701_PIN_13_SRCLKENAI__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
-#define MT2701_PIN_13_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(13) | 1)
-
-#define MT2701_PIN_14_URXD2__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
-#define MT2701_PIN_14_URXD2__FUNC_URXD2 (MTK_PIN_NO(14) | 1)
-#define MT2701_PIN_14_URXD2__FUNC_UTXD2 (MTK_PIN_NO(14) | 2)
-#define MT2701_PIN_14_URXD2__FUNC_SRCCLKENAI2 (MTK_PIN_NO(14) | 5)
-#define MT2701_PIN_14_URXD2__FUNC_DBG_MON_B_30 (MTK_PIN_NO(14) | 7)
-
-#define MT2701_PIN_15_UTXD2__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
-#define MT2701_PIN_15_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(15) | 1)
-#define MT2701_PIN_15_UTXD2__FUNC_URXD2 (MTK_PIN_NO(15) | 2)
-#define MT2701_PIN_15_UTXD2__FUNC_DBG_MON_B_31 (MTK_PIN_NO(15) | 7)
-
-#define MT2701_PIN_18_PCM_CLK__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
-#define MT2701_PIN_18_PCM_CLK__FUNC_PCM_CLK0 (MTK_PIN_NO(18) | 1)
-#define MT2701_PIN_18_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(18) | 2)
-#define MT2701_PIN_18_PCM_CLK__FUNC_MM_TEST_CK (MTK_PIN_NO(18) | 4)
-#define MT2701_PIN_18_PCM_CLK__FUNC_CONN_DSP_JCK (MTK_PIN_NO(18) | 5)
-#define MT2701_PIN_18_PCM_CLK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(18) | 6)
-#define MT2701_PIN_18_PCM_CLK__FUNC_DBG_MON_A_3 (MTK_PIN_NO(18) | 7)
-
-#define MT2701_PIN_19_PCM_SYNC__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
-#define MT2701_PIN_19_PCM_SYNC__FUNC_PCM_SYNC (MTK_PIN_NO(19) | 1)
-#define MT2701_PIN_19_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(19) | 2)
-#define MT2701_PIN_19_PCM_SYNC__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(19) | 5)
-#define MT2701_PIN_19_PCM_SYNC__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(19) | 6)
-#define MT2701_PIN_19_PCM_SYNC__FUNC_DBG_MON_A_5 (MTK_PIN_NO(19) | 7)
-
-#define MT2701_PIN_20_PCM_RX__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
-#define MT2701_PIN_20_PCM_RX__FUNC_PCM_RX (MTK_PIN_NO(20) | 1)
-#define MT2701_PIN_20_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(20) | 2)
-#define MT2701_PIN_20_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(20) | 3)
-#define MT2701_PIN_20_PCM_RX__FUNC_PCM_TX (MTK_PIN_NO(20) | 4)
-#define MT2701_PIN_20_PCM_RX__FUNC_CONN_DSP_JDI (MTK_PIN_NO(20) | 5)
-#define MT2701_PIN_20_PCM_RX__FUNC_WCN_PCM_RX (MTK_PIN_NO(20) | 6)
-#define MT2701_PIN_20_PCM_RX__FUNC_DBG_MON_A_4 (MTK_PIN_NO(20) | 7)
-
-#define MT2701_PIN_21_PCM_TX__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
-#define MT2701_PIN_21_PCM_TX__FUNC_PCM_TX (MTK_PIN_NO(21) | 1)
-#define MT2701_PIN_21_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(21) | 2)
-#define MT2701_PIN_21_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(21) | 3)
-#define MT2701_PIN_21_PCM_TX__FUNC_PCM_RX (MTK_PIN_NO(21) | 4)
-#define MT2701_PIN_21_PCM_TX__FUNC_CONN_DSP_JMS (MTK_PIN_NO(21) | 5)
-#define MT2701_PIN_21_PCM_TX__FUNC_WCN_PCM_TX (MTK_PIN_NO(21) | 6)
-#define MT2701_PIN_21_PCM_TX__FUNC_DBG_MON_A_2 (MTK_PIN_NO(21) | 7)
-
-#define MT2701_PIN_22_EINT0__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
-#define MT2701_PIN_22_EINT0__FUNC_UCTS0 (MTK_PIN_NO(22) | 1)
-#define MT2701_PIN_22_EINT0__FUNC_KCOL3 (MTK_PIN_NO(22) | 3)
-#define MT2701_PIN_22_EINT0__FUNC_CONN_DSP_JDO (MTK_PIN_NO(22) | 4)
-#define MT2701_PIN_22_EINT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(22) | 5)
-#define MT2701_PIN_22_EINT0__FUNC_DBG_MON_A_30 (MTK_PIN_NO(22) | 7)
-#define MT2701_PIN_22_EINT0__FUNC_PCIE0_PERST_N (MTK_PIN_NO(22) | 10)
-
-#define MT2701_PIN_23_EINT1__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
-#define MT2701_PIN_23_EINT1__FUNC_URTS0 (MTK_PIN_NO(23) | 1)
-#define MT2701_PIN_23_EINT1__FUNC_KCOL2 (MTK_PIN_NO(23) | 3)
-#define MT2701_PIN_23_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(23) | 4)
-#define MT2701_PIN_23_EINT1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(23) | 5)
-#define MT2701_PIN_23_EINT1__FUNC_DBG_MON_A_29 (MTK_PIN_NO(23) | 7)
-#define MT2701_PIN_23_EINT1__FUNC_PCIE1_PERST_N (MTK_PIN_NO(23) | 10)
-
-#define MT2701_PIN_24_EINT2__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
-#define MT2701_PIN_24_EINT2__FUNC_UCTS1 (MTK_PIN_NO(24) | 1)
-#define MT2701_PIN_24_EINT2__FUNC_KCOL1 (MTK_PIN_NO(24) | 3)
-#define MT2701_PIN_24_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(24) | 4)
-#define MT2701_PIN_24_EINT2__FUNC_DBG_MON_A_28 (MTK_PIN_NO(24) | 7)
-#define MT2701_PIN_24_EINT2__FUNC_PCIE2_PERST_N (MTK_PIN_NO(24) | 10)
-
-#define MT2701_PIN_25_EINT3__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
-#define MT2701_PIN_25_EINT3__FUNC_URTS1 (MTK_PIN_NO(25) | 1)
-#define MT2701_PIN_25_EINT3__FUNC_KCOL0 (MTK_PIN_NO(25) | 3)
-#define MT2701_PIN_25_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(25) | 4)
-#define MT2701_PIN_25_EINT3__FUNC_DBG_MON_A_27 (MTK_PIN_NO(25) | 7)
-
-#define MT2701_PIN_26_EINT4__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
-#define MT2701_PIN_26_EINT4__FUNC_UCTS3 (MTK_PIN_NO(26) | 1)
-#define MT2701_PIN_26_EINT4__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(26) | 2)
-#define MT2701_PIN_26_EINT4__FUNC_KROW3 (MTK_PIN_NO(26) | 3)
-#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_TCK0 (MTK_PIN_NO(26) | 4)
-#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(26) | 5)
-#define MT2701_PIN_26_EINT4__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(26) | 6)
-#define MT2701_PIN_26_EINT4__FUNC_DBG_MON_A_26 (MTK_PIN_NO(26) | 7)
-
-#define MT2701_PIN_27_EINT5__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
-#define MT2701_PIN_27_EINT5__FUNC_URTS3 (MTK_PIN_NO(27) | 1)
-#define MT2701_PIN_27_EINT5__FUNC_IDDIG_P1 (MTK_PIN_NO(27) | 2)
-#define MT2701_PIN_27_EINT5__FUNC_KROW2 (MTK_PIN_NO(27) | 3)
-#define MT2701_PIN_27_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(27) | 4)
-#define MT2701_PIN_27_EINT5__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(27) | 6)
-#define MT2701_PIN_27_EINT5__FUNC_DBG_MON_A_25 (MTK_PIN_NO(27) | 7)
-
-#define MT2701_PIN_28_EINT6__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
-#define MT2701_PIN_28_EINT6__FUNC_DRV_VBUS (MTK_PIN_NO(28) | 1)
-#define MT2701_PIN_28_EINT6__FUNC_KROW1 (MTK_PIN_NO(28) | 3)
-#define MT2701_PIN_28_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(28) | 4)
-#define MT2701_PIN_28_EINT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(28) | 6)
-#define MT2701_PIN_28_EINT6__FUNC_DBG_MON_A_24 (MTK_PIN_NO(28) | 7)
-
-#define MT2701_PIN_29_EINT7__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
-#define MT2701_PIN_29_EINT7__FUNC_IDDIG (MTK_PIN_NO(29) | 1)
-#define MT2701_PIN_29_EINT7__FUNC_MSDC1_WP (MTK_PIN_NO(29) | 2)
-#define MT2701_PIN_29_EINT7__FUNC_KROW0 (MTK_PIN_NO(29) | 3)
-#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(29) | 4)
-#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(29) | 5)
-#define MT2701_PIN_29_EINT7__FUNC_DBG_MON_A_23 (MTK_PIN_NO(29) | 7)
-#define MT2701_PIN_29_EINT7__FUNC_PCIE2_PERST_N (MTK_PIN_NO(29) | 14)
-
-#define MT2701_PIN_33_I2S1_DATA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
-#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA (MTK_PIN_NO(33) | 1)
-#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA_BYPS (MTK_PIN_NO(33) | 2)
-#define MT2701_PIN_33_I2S1_DATA__FUNC_PCM_TX (MTK_PIN_NO(33) | 3)
-#define MT2701_PIN_33_I2S1_DATA__FUNC_IMG_TEST_CK (MTK_PIN_NO(33) | 4)
-#define MT2701_PIN_33_I2S1_DATA__FUNC_G1_RXD0 (MTK_PIN_NO(33) | 5)
-#define MT2701_PIN_33_I2S1_DATA__FUNC_WCN_PCM_TX (MTK_PIN_NO(33) | 6)
-#define MT2701_PIN_33_I2S1_DATA__FUNC_DBG_MON_B_8 (MTK_PIN_NO(33) | 7)
-
-#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
-#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_I2S1_DATA_IN (MTK_PIN_NO(34) | 1)
-#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(34) | 3)
-#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_VDEC_TEST_CK (MTK_PIN_NO(34) | 4)
-#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_G1_RXD1 (MTK_PIN_NO(34) | 5)
-#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_WCN_PCM_RX (MTK_PIN_NO(34) | 6)
-#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_DBG_MON_B_7 (MTK_PIN_NO(34) | 7)
-
-#define MT2701_PIN_35_I2S1_BCK__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
-#define MT2701_PIN_35_I2S1_BCK__FUNC_I2S1_BCK (MTK_PIN_NO(35) | 1)
-#define MT2701_PIN_35_I2S1_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(35) | 3)
-#define MT2701_PIN_35_I2S1_BCK__FUNC_G1_RXD2 (MTK_PIN_NO(35) | 5)
-#define MT2701_PIN_35_I2S1_BCK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(35) | 6)
-#define MT2701_PIN_35_I2S1_BCK__FUNC_DBG_MON_B_9 (MTK_PIN_NO(35) | 7)
-
-#define MT2701_PIN_36_I2S1_LRCK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
-#define MT2701_PIN_36_I2S1_LRCK__FUNC_I2S1_LRCK (MTK_PIN_NO(36) | 1)
-#define MT2701_PIN_36_I2S1_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(36) | 3)
-#define MT2701_PIN_36_I2S1_LRCK__FUNC_G1_RXD3 (MTK_PIN_NO(36) | 5)
-#define MT2701_PIN_36_I2S1_LRCK__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(36) | 6)
-#define MT2701_PIN_36_I2S1_LRCK__FUNC_DBG_MON_B_10 (MTK_PIN_NO(36) | 7)
-
-#define MT2701_PIN_37_I2S1_MCLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
-#define MT2701_PIN_37_I2S1_MCLK__FUNC_I2S1_MCLK (MTK_PIN_NO(37) | 1)
-#define MT2701_PIN_37_I2S1_MCLK__FUNC_G1_RXDV (MTK_PIN_NO(37) | 5)
-#define MT2701_PIN_37_I2S1_MCLK__FUNC_DBG_MON_B_11 (MTK_PIN_NO(37) | 7)
-
-#define MT2701_PIN_39_JTMS__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
-#define MT2701_PIN_39_JTMS__FUNC_JTMS (MTK_PIN_NO(39) | 1)
-#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(39) | 2)
-#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(39) | 3)
-#define MT2701_PIN_39_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(39) | 4)
-
-#define MT2701_PIN_40_JTCK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
-#define MT2701_PIN_40_JTCK__FUNC_JTCK (MTK_PIN_NO(40) | 1)
-#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_TCK1 (MTK_PIN_NO(40) | 2)
-#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(40) | 3)
-#define MT2701_PIN_40_JTCK__FUNC_DFD_TCK_XI (MTK_PIN_NO(40) | 4)
-
-#define MT2701_PIN_41_JTDI__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
-#define MT2701_PIN_41_JTDI__FUNC_JTDI (MTK_PIN_NO(41) | 1)
-#define MT2701_PIN_41_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(41) | 2)
-#define MT2701_PIN_41_JTDI__FUNC_DFD_TDI_XI (MTK_PIN_NO(41) | 4)
-
-#define MT2701_PIN_42_JTDO__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
-#define MT2701_PIN_42_JTDO__FUNC_JTDO (MTK_PIN_NO(42) | 1)
-#define MT2701_PIN_42_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(42) | 2)
-#define MT2701_PIN_42_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(42) | 4)
-
-#define MT2701_PIN_43_NCLE__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
-#define MT2701_PIN_43_NCLE__FUNC_NCLE (MTK_PIN_NO(43) | 1)
-#define MT2701_PIN_43_NCLE__FUNC_EXT_XCS2 (MTK_PIN_NO(43) | 2)
-
-#define MT2701_PIN_44_NCEB1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
-#define MT2701_PIN_44_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(44) | 1)
-#define MT2701_PIN_44_NCEB1__FUNC_IDDIG (MTK_PIN_NO(44) | 2)
-
-#define MT2701_PIN_45_NCEB0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
-#define MT2701_PIN_45_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(45) | 1)
-#define MT2701_PIN_45_NCEB0__FUNC_DRV_VBUS (MTK_PIN_NO(45) | 2)
-
-#define MT2701_PIN_46_IR__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
-#define MT2701_PIN_46_IR__FUNC_IR (MTK_PIN_NO(46) | 1)
-
-#define MT2701_PIN_47_NREB__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
-#define MT2701_PIN_47_NREB__FUNC_NREB (MTK_PIN_NO(47) | 1)
-#define MT2701_PIN_47_NREB__FUNC_IDDIG_P1 (MTK_PIN_NO(47) | 2)
-
-#define MT2701_PIN_48_NRNB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
-#define MT2701_PIN_48_NRNB__FUNC_NRNB (MTK_PIN_NO(48) | 1)
-#define MT2701_PIN_48_NRNB__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(48) | 2)
-
-#define MT2701_PIN_49_I2S0_DATA__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
-#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA (MTK_PIN_NO(49) | 1)
-#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA_BYPS (MTK_PIN_NO(49) | 2)
-#define MT2701_PIN_49_I2S0_DATA__FUNC_PCM_TX (MTK_PIN_NO(49) | 3)
-#define MT2701_PIN_49_I2S0_DATA__FUNC_WCN_I2S_DO (MTK_PIN_NO(49) | 6)
-#define MT2701_PIN_49_I2S0_DATA__FUNC_DBG_MON_B_3 (MTK_PIN_NO(49) | 7)
-
-#define MT2701_PIN_53_SPI0_CSN__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
-#define MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS (MTK_PIN_NO(53) | 1)
-#define MT2701_PIN_53_SPI0_CSN__FUNC_SPDIF (MTK_PIN_NO(53) | 3)
-#define MT2701_PIN_53_SPI0_CSN__FUNC_ADC_CK (MTK_PIN_NO(53) | 4)
-#define MT2701_PIN_53_SPI0_CSN__FUNC_PWM1 (MTK_PIN_NO(53) | 5)
-#define MT2701_PIN_53_SPI0_CSN__FUNC_DBG_MON_A_7 (MTK_PIN_NO(53) | 7)
-
-#define MT2701_PIN_54_SPI0_CK__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
-#define MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK (MTK_PIN_NO(54) | 1)
-#define MT2701_PIN_54_SPI0_CK__FUNC_SPDIF_IN1 (MTK_PIN_NO(54) | 3)
-#define MT2701_PIN_54_SPI0_CK__FUNC_ADC_DAT_IN (MTK_PIN_NO(54) | 4)
-#define MT2701_PIN_54_SPI0_CK__FUNC_DBG_MON_A_10 (MTK_PIN_NO(54) | 7)
-
-#define MT2701_PIN_55_SPI0_MI__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
-#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI (MTK_PIN_NO(55) | 1)
-#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MO (MTK_PIN_NO(55) | 2)
-#define MT2701_PIN_55_SPI0_MI__FUNC_MSDC1_WP (MTK_PIN_NO(55) | 3)
-#define MT2701_PIN_55_SPI0_MI__FUNC_ADC_WS (MTK_PIN_NO(55) | 4)
-#define MT2701_PIN_55_SPI0_MI__FUNC_PWM2 (MTK_PIN_NO(55) | 5)
-#define MT2701_PIN_55_SPI0_MI__FUNC_DBG_MON_A_8 (MTK_PIN_NO(55) | 7)
-
-#define MT2701_PIN_56_SPI0_MO__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
-#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO (MTK_PIN_NO(56) | 1)
-#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MI (MTK_PIN_NO(56) | 2)
-#define MT2701_PIN_56_SPI0_MO__FUNC_SPDIF_IN0 (MTK_PIN_NO(56) | 3)
-#define MT2701_PIN_56_SPI0_MO__FUNC_DBG_MON_A_9 (MTK_PIN_NO(56) | 7)
-
-#define MT2701_PIN_57_SDA1__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
-#define MT2701_PIN_57_SDA1__FUNC_SDA1 (MTK_PIN_NO(57) | 1)
-
-#define MT2701_PIN_58_SCL1__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
-#define MT2701_PIN_58_SCL1__FUNC_SCL1 (MTK_PIN_NO(58) | 1)
-
-#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
-#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_I2S0_DATA_IN (MTK_PIN_NO(72) | 1)
-#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(72) | 3)
-#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PWM0 (MTK_PIN_NO(72) | 4)
-#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DISP_PWM (MTK_PIN_NO(72) | 5)
-#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_WCN_I2S_DI (MTK_PIN_NO(72) | 6)
-#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DBG_MON_B_2 (MTK_PIN_NO(72) | 7)
-
-#define MT2701_PIN_73_I2S0_LRCK__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
-#define MT2701_PIN_73_I2S0_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(73) | 1)
-#define MT2701_PIN_73_I2S0_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(73) | 3)
-#define MT2701_PIN_73_I2S0_LRCK__FUNC_WCN_I2S_LRCK (MTK_PIN_NO(73) | 6)
-#define MT2701_PIN_73_I2S0_LRCK__FUNC_DBG_MON_B_5 (MTK_PIN_NO(73) | 7)
-
-#define MT2701_PIN_74_I2S0_BCK__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
-#define MT2701_PIN_74_I2S0_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(74) | 1)
-#define MT2701_PIN_74_I2S0_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(74) | 3)
-#define MT2701_PIN_74_I2S0_BCK__FUNC_WCN_I2S_BCK (MTK_PIN_NO(74) | 6)
-#define MT2701_PIN_74_I2S0_BCK__FUNC_DBG_MON_B_4 (MTK_PIN_NO(74) | 7)
-
-#define MT2701_PIN_75_SDA0__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
-#define MT2701_PIN_75_SDA0__FUNC_SDA0 (MTK_PIN_NO(75) | 1)
-
-#define MT2701_PIN_76_SCL0__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
-#define MT2701_PIN_76_SCL0__FUNC_SCL0 (MTK_PIN_NO(76) | 1)
-
-#define MT2701_PIN_77_SDA2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
-#define MT2701_PIN_77_SDA2__FUNC_SDA2 (MTK_PIN_NO(77) | 1)
-
-#define MT2701_PIN_78_SCL2__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
-#define MT2701_PIN_78_SCL2__FUNC_SCL2 (MTK_PIN_NO(78) | 1)
-
-#define MT2701_PIN_79_URXD0__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
-#define MT2701_PIN_79_URXD0__FUNC_URXD0 (MTK_PIN_NO(79) | 1)
-#define MT2701_PIN_79_URXD0__FUNC_UTXD0 (MTK_PIN_NO(79) | 2)
-#define MT2701_PIN_79_URXD0__FUNC_ (MTK_PIN_NO(79) | 5)
-
-#define MT2701_PIN_80_UTXD0__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
-#define MT2701_PIN_80_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(80) | 1)
-#define MT2701_PIN_80_UTXD0__FUNC_URXD0 (MTK_PIN_NO(80) | 2)
-
-#define MT2701_PIN_81_URXD1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
-#define MT2701_PIN_81_URXD1__FUNC_URXD1 (MTK_PIN_NO(81) | 1)
-#define MT2701_PIN_81_URXD1__FUNC_UTXD1 (MTK_PIN_NO(81) | 2)
-
-#define MT2701_PIN_82_UTXD1__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
-#define MT2701_PIN_82_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(82) | 1)
-#define MT2701_PIN_82_UTXD1__FUNC_URXD1 (MTK_PIN_NO(82) | 2)
-
-#define MT2701_PIN_83_LCM_RST__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
-#define MT2701_PIN_83_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(83) | 1)
-#define MT2701_PIN_83_LCM_RST__FUNC_VDAC_CK_XI (MTK_PIN_NO(83) | 2)
-#define MT2701_PIN_83_LCM_RST__FUNC_DBG_MON_B_1 (MTK_PIN_NO(83) | 7)
-
-#define MT2701_PIN_84_DSI_TE__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
-#define MT2701_PIN_84_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(84) | 1)
-#define MT2701_PIN_84_DSI_TE__FUNC_DBG_MON_B_0 (MTK_PIN_NO(84) | 7)
-
-#define MT2701_PIN_91_TDN3__FUNC_GPI91 (MTK_PIN_NO(91) | 0)
-#define MT2701_PIN_91_TDN3__FUNC_TDN3 (MTK_PIN_NO(91) | 1)
-
-#define MT2701_PIN_92_TDP3__FUNC_GPI92 (MTK_PIN_NO(92) | 0)
-#define MT2701_PIN_92_TDP3__FUNC_TDP3 (MTK_PIN_NO(92) | 1)
-
-#define MT2701_PIN_93_TDN2__FUNC_GPI93 (MTK_PIN_NO(93) | 0)
-#define MT2701_PIN_93_TDN2__FUNC_TDN2 (MTK_PIN_NO(93) | 1)
-
-#define MT2701_PIN_94_TDP2__FUNC_GPI94 (MTK_PIN_NO(94) | 0)
-#define MT2701_PIN_94_TDP2__FUNC_TDP2 (MTK_PIN_NO(94) | 1)
-
-#define MT2701_PIN_95_TCN__FUNC_GPI95 (MTK_PIN_NO(95) | 0)
-#define MT2701_PIN_95_TCN__FUNC_TCN (MTK_PIN_NO(95) | 1)
-
-#define MT2701_PIN_96_TCP__FUNC_GPI96 (MTK_PIN_NO(96) | 0)
-#define MT2701_PIN_96_TCP__FUNC_TCP (MTK_PIN_NO(96) | 1)
-
-#define MT2701_PIN_97_TDN1__FUNC_GPI97 (MTK_PIN_NO(97) | 0)
-#define MT2701_PIN_97_TDN1__FUNC_TDN1 (MTK_PIN_NO(97) | 1)
-
-#define MT2701_PIN_98_TDP1__FUNC_GPI98 (MTK_PIN_NO(98) | 0)
-#define MT2701_PIN_98_TDP1__FUNC_TDP1 (MTK_PIN_NO(98) | 1)
-
-#define MT2701_PIN_99_TDN0__FUNC_GPI99 (MTK_PIN_NO(99) | 0)
-#define MT2701_PIN_99_TDN0__FUNC_TDN0 (MTK_PIN_NO(99) | 1)
-
-#define MT2701_PIN_100_TDP0__FUNC_GPI100 (MTK_PIN_NO(100) | 0)
-#define MT2701_PIN_100_TDP0__FUNC_TDP0 (MTK_PIN_NO(100) | 1)
-
-#define MT2701_PIN_101_SPI2_CSN__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
-#define MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS (MTK_PIN_NO(101) | 1)
-#define MT2701_PIN_101_SPI2_CSN__FUNC_SCL3 (MTK_PIN_NO(101) | 3)
-#define MT2701_PIN_101_SPI2_CSN__FUNC_KROW0 (MTK_PIN_NO(101) | 4)
-
-#define MT2701_PIN_102_SPI2_MI__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
-#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI (MTK_PIN_NO(102) | 1)
-#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MO (MTK_PIN_NO(102) | 2)
-#define MT2701_PIN_102_SPI2_MI__FUNC_SDA3 (MTK_PIN_NO(102) | 3)
-#define MT2701_PIN_102_SPI2_MI__FUNC_KROW1 (MTK_PIN_NO(102) | 4)
-
-#define MT2701_PIN_103_SPI2_MO__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
-#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO (MTK_PIN_NO(103) | 1)
-#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MI (MTK_PIN_NO(103) | 2)
-#define MT2701_PIN_103_SPI2_MO__FUNC_SCL3 (MTK_PIN_NO(103) | 3)
-#define MT2701_PIN_103_SPI2_MO__FUNC_KROW2 (MTK_PIN_NO(103) | 4)
-
-#define MT2701_PIN_104_SPI2_CLK__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
-#define MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK (MTK_PIN_NO(104) | 1)
-#define MT2701_PIN_104_SPI2_CLK__FUNC_SDA3 (MTK_PIN_NO(104) | 3)
-#define MT2701_PIN_104_SPI2_CLK__FUNC_KROW3 (MTK_PIN_NO(104) | 4)
-
-#define MT2701_PIN_105_MSDC1_CMD__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
-#define MT2701_PIN_105_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(105) | 1)
-#define MT2701_PIN_105_MSDC1_CMD__FUNC_ANT_SEL0 (MTK_PIN_NO(105) | 2)
-#define MT2701_PIN_105_MSDC1_CMD__FUNC_SDA1 (MTK_PIN_NO(105) | 3)
-#define MT2701_PIN_105_MSDC1_CMD__FUNC_I2SOUT_BCK (MTK_PIN_NO(105) | 6)
-#define MT2701_PIN_105_MSDC1_CMD__FUNC_DBG_MON_B_27 (MTK_PIN_NO(105) | 7)
-
-#define MT2701_PIN_106_MSDC1_CLK__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
-#define MT2701_PIN_106_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(106) | 1)
-#define MT2701_PIN_106_MSDC1_CLK__FUNC_ANT_SEL1 (MTK_PIN_NO(106) | 2)
-#define MT2701_PIN_106_MSDC1_CLK__FUNC_SCL1 (MTK_PIN_NO(106) | 3)
-#define MT2701_PIN_106_MSDC1_CLK__FUNC_I2SOUT_LRCK (MTK_PIN_NO(106) | 6)
-#define MT2701_PIN_106_MSDC1_CLK__FUNC_DBG_MON_B_28 (MTK_PIN_NO(106) | 7)
-
-#define MT2701_PIN_107_MSDC1_DAT0__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
-#define MT2701_PIN_107_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(107) | 1)
-#define MT2701_PIN_107_MSDC1_DAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(107) | 2)
-#define MT2701_PIN_107_MSDC1_DAT0__FUNC_UTXD0 (MTK_PIN_NO(107) | 5)
-#define MT2701_PIN_107_MSDC1_DAT0__FUNC_I2SOUT_DATA_OUT (MTK_PIN_NO(107) | 6)
-#define MT2701_PIN_107_MSDC1_DAT0__FUNC_DBG_MON_B_26 (MTK_PIN_NO(107) | 7)
-
-#define MT2701_PIN_108_MSDC1_DAT1__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
-#define MT2701_PIN_108_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(108) | 1)
-#define MT2701_PIN_108_MSDC1_DAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(108) | 2)
-#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM0 (MTK_PIN_NO(108) | 3)
-#define MT2701_PIN_108_MSDC1_DAT1__FUNC_URXD0 (MTK_PIN_NO(108) | 5)
-#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM1 (MTK_PIN_NO(108) | 6)
-#define MT2701_PIN_108_MSDC1_DAT1__FUNC_DBG_MON_B_25 (MTK_PIN_NO(108) | 7)
-
-#define MT2701_PIN_109_MSDC1_DAT2__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
-#define MT2701_PIN_109_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(109) | 1)
-#define MT2701_PIN_109_MSDC1_DAT2__FUNC_ANT_SEL4 (MTK_PIN_NO(109) | 2)
-#define MT2701_PIN_109_MSDC1_DAT2__FUNC_SDA2 (MTK_PIN_NO(109) | 3)
-#define MT2701_PIN_109_MSDC1_DAT2__FUNC_UTXD1 (MTK_PIN_NO(109) | 5)
-#define MT2701_PIN_109_MSDC1_DAT2__FUNC_PWM2 (MTK_PIN_NO(109) | 6)
-#define MT2701_PIN_109_MSDC1_DAT2__FUNC_DBG_MON_B_24 (MTK_PIN_NO(109) | 7)
-
-#define MT2701_PIN_110_MSDC1_DAT3__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
-#define MT2701_PIN_110_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(110) | 1)
-#define MT2701_PIN_110_MSDC1_DAT3__FUNC_ANT_SEL5 (MTK_PIN_NO(110) | 2)
-#define MT2701_PIN_110_MSDC1_DAT3__FUNC_SCL2 (MTK_PIN_NO(110) | 3)
-#define MT2701_PIN_110_MSDC1_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(110) | 4)
-#define MT2701_PIN_110_MSDC1_DAT3__FUNC_URXD1 (MTK_PIN_NO(110) | 5)
-#define MT2701_PIN_110_MSDC1_DAT3__FUNC_PWM3 (MTK_PIN_NO(110) | 6)
-#define MT2701_PIN_110_MSDC1_DAT3__FUNC_DBG_MON_B_23 (MTK_PIN_NO(110) | 7)
-
-#define MT2701_PIN_111_MSDC0_DAT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
-#define MT2701_PIN_111_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(111) | 1)
-#define MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(111) | 4)
-
-#define MT2701_PIN_112_MSDC0_DAT6__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
-#define MT2701_PIN_112_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(112) | 1)
-#define MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(112) | 4)
-
-#define MT2701_PIN_113_MSDC0_DAT5__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
-#define MT2701_PIN_113_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(113) | 1)
-#define MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5 (MTK_PIN_NO(113) | 4)
-
-#define MT2701_PIN_114_MSDC0_DAT4__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
-#define MT2701_PIN_114_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(114) | 1)
-#define MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4 (MTK_PIN_NO(114) | 4)
-
-#define MT2701_PIN_115_MSDC0_RSTB__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
-#define MT2701_PIN_115_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(115) | 1)
-#define MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8 (MTK_PIN_NO(115) | 4)
-
-#define MT2701_PIN_116_MSDC0_CMD__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
-#define MT2701_PIN_116_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(116) | 1)
-#define MT2701_PIN_116_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(116) | 4)
-
-#define MT2701_PIN_117_MSDC0_CLK__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
-#define MT2701_PIN_117_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(117) | 1)
-#define MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(117) | 4)
-
-#define MT2701_PIN_118_MSDC0_DAT3__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
-#define MT2701_PIN_118_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(118) | 1)
-#define MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3 (MTK_PIN_NO(118) | 4)
-
-#define MT2701_PIN_119_MSDC0_DAT2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
-#define MT2701_PIN_119_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(119) | 1)
-#define MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2 (MTK_PIN_NO(119) | 4)
-
-#define MT2701_PIN_120_MSDC0_DAT1__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
-#define MT2701_PIN_120_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(120) | 1)
-#define MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1 (MTK_PIN_NO(120) | 4)
-
-#define MT2701_PIN_121_MSDC0_DAT0__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
-#define MT2701_PIN_121_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(121) | 1)
-#define MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0 (MTK_PIN_NO(121) | 4)
-#define MT2701_PIN_121_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(121) | 5)
-
-#define MT2701_PIN_122_CEC__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
-#define MT2701_PIN_122_CEC__FUNC_CEC (MTK_PIN_NO(122) | 1)
-#define MT2701_PIN_122_CEC__FUNC_SDA2 (MTK_PIN_NO(122) | 4)
-#define MT2701_PIN_122_CEC__FUNC_URXD0 (MTK_PIN_NO(122) | 5)
-
-#define MT2701_PIN_123_HTPLG__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
-#define MT2701_PIN_123_HTPLG__FUNC_HTPLG (MTK_PIN_NO(123) | 1)
-#define MT2701_PIN_123_HTPLG__FUNC_SCL2 (MTK_PIN_NO(123) | 4)
-#define MT2701_PIN_123_HTPLG__FUNC_UTXD0 (MTK_PIN_NO(123) | 5)
-
-#define MT2701_PIN_124_HDMISCK__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
-#define MT2701_PIN_124_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(124) | 1)
-#define MT2701_PIN_124_HDMISCK__FUNC_SDA1 (MTK_PIN_NO(124) | 4)
-#define MT2701_PIN_124_HDMISCK__FUNC_PWM3 (MTK_PIN_NO(124) | 5)
-
-#define MT2701_PIN_125_HDMISD__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
-#define MT2701_PIN_125_HDMISD__FUNC_HDMISD (MTK_PIN_NO(125) | 1)
-#define MT2701_PIN_125_HDMISD__FUNC_SCL1 (MTK_PIN_NO(125) | 4)
-#define MT2701_PIN_125_HDMISD__FUNC_PWM4 (MTK_PIN_NO(125) | 5)
-
-#define MT2701_PIN_126_I2S0_MCLK__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
-#define MT2701_PIN_126_I2S0_MCLK__FUNC_I2S0_MCLK (MTK_PIN_NO(126) | 1)
-#define MT2701_PIN_126_I2S0_MCLK__FUNC_WCN_I2S_MCLK (MTK_PIN_NO(126) | 6)
-#define MT2701_PIN_126_I2S0_MCLK__FUNC_DBG_MON_B_6 (MTK_PIN_NO(126) | 7)
-
-#define MT2701_PIN_199_SPI1_CLK__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
-#define MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK (MTK_PIN_NO(199) | 1)
-#define MT2701_PIN_199_SPI1_CLK__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(199) | 3)
-#define MT2701_PIN_199_SPI1_CLK__FUNC_KCOL3 (MTK_PIN_NO(199) | 4)
-#define MT2701_PIN_199_SPI1_CLK__FUNC_DBG_MON_B_15 (MTK_PIN_NO(199) | 7)
-
-#define MT2701_PIN_200_SPDIF_OUT__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
-#define MT2701_PIN_200_SPDIF_OUT__FUNC_SPDIF_OUT (MTK_PIN_NO(200) | 1)
-#define MT2701_PIN_200_SPDIF_OUT__FUNC_G1_TXD3 (MTK_PIN_NO(200) | 5)
-#define MT2701_PIN_200_SPDIF_OUT__FUNC_URXD2 (MTK_PIN_NO(200) | 6)
-#define MT2701_PIN_200_SPDIF_OUT__FUNC_DBG_MON_B_16 (MTK_PIN_NO(200) | 7)
-
-#define MT2701_PIN_201_SPDIF_IN0__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
-#define MT2701_PIN_201_SPDIF_IN0__FUNC_SPDIF_IN0 (MTK_PIN_NO(201) | 1)
-#define MT2701_PIN_201_SPDIF_IN0__FUNC_G1_TXEN (MTK_PIN_NO(201) | 5)
-#define MT2701_PIN_201_SPDIF_IN0__FUNC_UTXD2 (MTK_PIN_NO(201) | 6)
-#define MT2701_PIN_201_SPDIF_IN0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(201) | 7)
-
-#define MT2701_PIN_202_SPDIF_IN1__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
-#define MT2701_PIN_202_SPDIF_IN1__FUNC_SPDIF_IN1 (MTK_PIN_NO(202) | 1)
-
-#define MT2701_PIN_203_PWM0__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
-#define MT2701_PIN_203_PWM0__FUNC_PWM0 (MTK_PIN_NO(203) | 1)
-#define MT2701_PIN_203_PWM0__FUNC_DISP_PWM (MTK_PIN_NO(203) | 2)
-#define MT2701_PIN_203_PWM0__FUNC_G1_TXD2 (MTK_PIN_NO(203) | 5)
-#define MT2701_PIN_203_PWM0__FUNC_DBG_MON_B_18 (MTK_PIN_NO(203) | 7)
-#define MT2701_PIN_203_PWM0__FUNC_I2S2_DATA (MTK_PIN_NO(203) | 9)
-
-#define MT2701_PIN_204_PWM1__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
-#define MT2701_PIN_204_PWM1__FUNC_PWM1 (MTK_PIN_NO(204) | 1)
-#define MT2701_PIN_204_PWM1__FUNC_CLKM3 (MTK_PIN_NO(204) | 2)
-#define MT2701_PIN_204_PWM1__FUNC_G1_TXD1 (MTK_PIN_NO(204) | 5)
-#define MT2701_PIN_204_PWM1__FUNC_DBG_MON_B_19 (MTK_PIN_NO(204) | 7)
-#define MT2701_PIN_204_PWM1__FUNC_I2S3_DATA (MTK_PIN_NO(204) | 9)
-
-#define MT2701_PIN_205_PWM2__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
-#define MT2701_PIN_205_PWM2__FUNC_PWM2 (MTK_PIN_NO(205) | 1)
-#define MT2701_PIN_205_PWM2__FUNC_CLKM2 (MTK_PIN_NO(205) | 2)
-#define MT2701_PIN_205_PWM2__FUNC_G1_TXD0 (MTK_PIN_NO(205) | 5)
-#define MT2701_PIN_205_PWM2__FUNC_DBG_MON_B_20 (MTK_PIN_NO(205) | 7)
-
-#define MT2701_PIN_206_PWM3__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
-#define MT2701_PIN_206_PWM3__FUNC_PWM3 (MTK_PIN_NO(206) | 1)
-#define MT2701_PIN_206_PWM3__FUNC_CLKM1 (MTK_PIN_NO(206) | 2)
-#define MT2701_PIN_206_PWM3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(206) | 3)
-#define MT2701_PIN_206_PWM3__FUNC_G1_TXC (MTK_PIN_NO(206) | 5)
-#define MT2701_PIN_206_PWM3__FUNC_DBG_MON_B_21 (MTK_PIN_NO(206) | 7)
-
-#define MT2701_PIN_207_PWM4__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
-#define MT2701_PIN_207_PWM4__FUNC_PWM4 (MTK_PIN_NO(207) | 1)
-#define MT2701_PIN_207_PWM4__FUNC_CLKM0 (MTK_PIN_NO(207) | 2)
-#define MT2701_PIN_207_PWM4__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(207) | 3)
-#define MT2701_PIN_207_PWM4__FUNC_G1_RXC (MTK_PIN_NO(207) | 5)
-#define MT2701_PIN_207_PWM4__FUNC_DBG_MON_B_22 (MTK_PIN_NO(207) | 7)
-
-#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
-#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(208) | 1)
-#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PWM0 (MTK_PIN_NO(208) | 2)
-#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_ANT_SEL5 (MTK_PIN_NO(208) | 4)
-#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM (MTK_PIN_NO(208) | 5)
-#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(208) | 7)
-#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PCIE0_PERST_N (MTK_PIN_NO(208) | 11)
-
-#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
-#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(209) | 1)
-#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_MSDC1_WP (MTK_PIN_NO(209) | 2)
-#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PWM1 (MTK_PIN_NO(209) | 5)
-#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_DBG_MON_A_32 (MTK_PIN_NO(209) | 7)
-#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PCIE1_PERST_N (MTK_PIN_NO(209) | 11)
-
-#define MT2701_PIN_236_EXT_SDIO3__FUNC_GPIO236 (MTK_PIN_NO(236) | 0)
-#define MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3 (MTK_PIN_NO(236) | 1)
-#define MT2701_PIN_236_EXT_SDIO3__FUNC_IDDIG (MTK_PIN_NO(236) | 2)
-#define MT2701_PIN_236_EXT_SDIO3__FUNC_DBG_MON_A_1 (MTK_PIN_NO(236) | 7)
-
-#define MT2701_PIN_237_EXT_SDIO2__FUNC_GPIO237 (MTK_PIN_NO(237) | 0)
-#define MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2 (MTK_PIN_NO(237) | 1)
-#define MT2701_PIN_237_EXT_SDIO2__FUNC_DRV_VBUS (MTK_PIN_NO(237) | 2)
-
-#define MT2701_PIN_238_EXT_SDIO1__FUNC_GPIO238 (MTK_PIN_NO(238) | 0)
-#define MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1 (MTK_PIN_NO(238) | 1)
-#define MT2701_PIN_238_EXT_SDIO1__FUNC_IDDIG_P1 (MTK_PIN_NO(238) | 2)
-
-#define MT2701_PIN_239_EXT_SDIO0__FUNC_GPIO239 (MTK_PIN_NO(239) | 0)
-#define MT2701_PIN_239_EXT_SDIO0__FUNC_EXT_SDIO0 (MTK_PIN_NO(239) | 1)
-#define MT2701_PIN_239_EXT_SDIO0__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(239) | 2)
-
-#define MT2701_PIN_240_EXT_XCS__FUNC_GPIO240 (MTK_PIN_NO(240) | 0)
-#define MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS (MTK_PIN_NO(240) | 1)
-
-#define MT2701_PIN_241_EXT_SCK__FUNC_GPIO241 (MTK_PIN_NO(241) | 0)
-#define MT2701_PIN_241_EXT_SCK__FUNC_EXT_SCK (MTK_PIN_NO(241) | 1)
-
-#define MT2701_PIN_242_URTS2__FUNC_GPIO242 (MTK_PIN_NO(242) | 0)
-#define MT2701_PIN_242_URTS2__FUNC_URTS2 (MTK_PIN_NO(242) | 1)
-#define MT2701_PIN_242_URTS2__FUNC_UTXD3 (MTK_PIN_NO(242) | 2)
-#define MT2701_PIN_242_URTS2__FUNC_URXD3 (MTK_PIN_NO(242) | 3)
-#define MT2701_PIN_242_URTS2__FUNC_SCL1 (MTK_PIN_NO(242) | 4)
-#define MT2701_PIN_242_URTS2__FUNC_DBG_MON_B_32 (MTK_PIN_NO(242) | 7)
-
-#define MT2701_PIN_243_UCTS2__FUNC_GPIO243 (MTK_PIN_NO(243) | 0)
-#define MT2701_PIN_243_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(243) | 1)
-#define MT2701_PIN_243_UCTS2__FUNC_URXD3 (MTK_PIN_NO(243) | 2)
-#define MT2701_PIN_243_UCTS2__FUNC_UTXD3 (MTK_PIN_NO(243) | 3)
-#define MT2701_PIN_243_UCTS2__FUNC_SDA1 (MTK_PIN_NO(243) | 4)
-#define MT2701_PIN_243_UCTS2__FUNC_DBG_MON_A_6 (MTK_PIN_NO(243) | 7)
-
-#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_GPIO244 (MTK_PIN_NO(244) | 0)
-#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_HDMI_SDA_RX (MTK_PIN_NO(244) | 1)
-
-#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_GPIO245 (MTK_PIN_NO(245) | 0)
-#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_HDMI_SCL_RX (MTK_PIN_NO(245) | 1)
-
-#define MT2701_PIN_246_MHL_SENCE__FUNC_GPIO246 (MTK_PIN_NO(246) | 0)
-
-#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_GPIO247 (MTK_PIN_NO(247) | 0)
-#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_HDMI_HPD_RX (MTK_PIN_NO(247) | 1)
-
-#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_GPIO248 (MTK_PIN_NO(248) | 0)
-#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_HDMI_TESTOUTP_RX (MTK_PIN_NO(248) | 1)
-
-#define MT2701_PIN_249_MSDC0E_RSTB__FUNC_MSDC0E_RSTB (MTK_PIN_NO(249) | 9)
-
-#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_MSDC3_DAT7 (MTK_PIN_NO(250) | 9)
-#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_PCIE0_CLKREQ_N (MTK_PIN_NO(250) | 14)
-
-#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_MSDC3_DAT6 (MTK_PIN_NO(251) | 9)
-#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(251) | 14)
-
-#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_MSDC3_DAT5 (MTK_PIN_NO(252) | 9)
-#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_PCIE1_CLKREQ_N (MTK_PIN_NO(252) | 14)
-
-#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_MSDC3_DAT4 (MTK_PIN_NO(253) | 9)
-#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(253) | 14)
-
-#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(254) | 9)
-#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_PCIE2_CLKREQ_N (MTK_PIN_NO(254) | 14)
-
-#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(255) | 9)
-#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(255) | 14)
-
-#define MT2701_PIN_256_MSDC0E_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(256) | 9)
-
-#define MT2701_PIN_257_MSDC0E_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(257) | 9)
-
-#define MT2701_PIN_258_MSDC0E_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(258) | 9)
-
-#define MT2701_PIN_259_MSDC0E_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(259) | 9)
-
-#define MT2701_PIN_260_MSDC0E_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(260) | 9)
-
-#define MT2701_PIN_261_MSDC1_INS__FUNC_GPIO261 (MTK_PIN_NO(261) | 0)
-#define MT2701_PIN_261_MSDC1_INS__FUNC_MSDC1_INS (MTK_PIN_NO(261) | 1)
-#define MT2701_PIN_261_MSDC1_INS__FUNC_DBG_MON_B_29 (MTK_PIN_NO(261) | 7)
-
-#define MT2701_PIN_262_G2_TXEN__FUNC_GPIO262 (MTK_PIN_NO(262) | 0)
-#define MT2701_PIN_262_G2_TXEN__FUNC_G2_TXEN (MTK_PIN_NO(262) | 1)
-
-#define MT2701_PIN_263_G2_TXD3__FUNC_GPIO263 (MTK_PIN_NO(263) | 0)
-#define MT2701_PIN_263_G2_TXD3__FUNC_G2_TXD3 (MTK_PIN_NO(263) | 1)
-#define MT2701_PIN_263_G2_TXD3__FUNC_ANT_SEL5 (MTK_PIN_NO(263) | 6)
-
-#define MT2701_PIN_264_G2_TXD2__FUNC_GPIO264 (MTK_PIN_NO(264) | 0)
-#define MT2701_PIN_264_G2_TXD2__FUNC_G2_TXD2 (MTK_PIN_NO(264) | 1)
-#define MT2701_PIN_264_G2_TXD2__FUNC_ANT_SEL4 (MTK_PIN_NO(264) | 6)
-
-#define MT2701_PIN_265_G2_TXD1__FUNC_GPIO265 (MTK_PIN_NO(265) | 0)
-#define MT2701_PIN_265_G2_TXD1__FUNC_G2_TXD1 (MTK_PIN_NO(265) | 1)
-#define MT2701_PIN_265_G2_TXD1__FUNC_ANT_SEL3 (MTK_PIN_NO(265) | 6)
-
-#define MT2701_PIN_266_G2_TXD0__FUNC_GPIO266 (MTK_PIN_NO(266) | 0)
-#define MT2701_PIN_266_G2_TXD0__FUNC_G2_TXD0 (MTK_PIN_NO(266) | 1)
-#define MT2701_PIN_266_G2_TXD0__FUNC_ANT_SEL2 (MTK_PIN_NO(266) | 6)
-
-#define MT2701_PIN_267_G2_TXC__FUNC_GPIO267 (MTK_PIN_NO(267) | 0)
-#define MT2701_PIN_267_G2_TXC__FUNC_G2_TXC (MTK_PIN_NO(267) | 1)
-
-#define MT2701_PIN_268_G2_RXC__FUNC_GPIO268 (MTK_PIN_NO(268) | 0)
-#define MT2701_PIN_268_G2_RXC__FUNC_G2_RXC (MTK_PIN_NO(268) | 1)
-
-#define MT2701_PIN_269_G2_RXD0__FUNC_GPIO269 (MTK_PIN_NO(269) | 0)
-#define MT2701_PIN_269_G2_RXD0__FUNC_G2_RXD0 (MTK_PIN_NO(269) | 1)
-
-#define MT2701_PIN_270_G2_RXD1__FUNC_GPIO270 (MTK_PIN_NO(270) | 0)
-#define MT2701_PIN_270_G2_RXD1__FUNC_G2_RXD1 (MTK_PIN_NO(270) | 1)
-
-#define MT2701_PIN_271_G2_RXD2__FUNC_GPIO271 (MTK_PIN_NO(271) | 0)
-#define MT2701_PIN_271_G2_RXD2__FUNC_G2_RXD2 (MTK_PIN_NO(271) | 1)
-
-#define MT2701_PIN_272_G2_RXD3__FUNC_GPIO272 (MTK_PIN_NO(272) | 0)
-#define MT2701_PIN_272_G2_RXD3__FUNC_G2_RXD3 (MTK_PIN_NO(272) | 1)
-
-#define MT2701_PIN_274_G2_RXDV__FUNC_GPIO274 (MTK_PIN_NO(274) | 0)
-#define MT2701_PIN_274_G2_RXDV__FUNC_G2_RXDV (MTK_PIN_NO(274) | 1)
-
-#define MT2701_PIN_275_MDC__FUNC_GPIO275 (MTK_PIN_NO(275) | 0)
-#define MT2701_PIN_275_MDC__FUNC_MDC (MTK_PIN_NO(275) | 1)
-#define MT2701_PIN_275_MDC__FUNC_ANT_SEL0 (MTK_PIN_NO(275) | 6)
-
-#define MT2701_PIN_276_MDIO__FUNC_GPIO276 (MTK_PIN_NO(276) | 0)
-#define MT2701_PIN_276_MDIO__FUNC_MDIO (MTK_PIN_NO(276) | 1)
-#define MT2701_PIN_276_MDIO__FUNC_ANT_SEL1 (MTK_PIN_NO(276) | 6)
-
-#define MT2701_PIN_278_JTAG_RESET__FUNC_GPIO278 (MTK_PIN_NO(278) | 0)
-#define MT2701_PIN_278_JTAG_RESET__FUNC_JTAG_RESET (MTK_PIN_NO(278) | 1)
-
-#endif /* __DTS_MT2701_PINFUNC_H */
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
deleted file mode 100644
index ce6a4015fed5a..0000000000000
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ /dev/null
@@ -1,756 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2015 MediaTek Inc.
- * Author: Erin.Lo <erin.lo@mediatek.com>
- *
- */
-
-#include <dt-bindings/clock/mt2701-clk.h>
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/power/mt2701-power.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/memory/mt2701-larb-port.h>
-#include <dt-bindings/reset/mt2701-resets.h>
-#include "mt2701-pinfunc.h"
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	compatible = "mediatek,mt2701";
-	interrupt-parent = <&cirq>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "mediatek,mt81xx-tz-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x3>;
-		};
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		trustzone-bootinfo@80002000 {
-			compatible = "mediatek,trustzone-bootinfo";
-			reg = <0 0x80002000 0 0x1000>;
-		};
-	};
-
-	system_clk: dummy13m {
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-		#clock-cells = <0>;
-	};
-
-	rtc_clk: dummy32k {
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-		#clock-cells = <0>;
-	};
-
-	clk26m: oscillator@0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-		clock-output-names = "clk26m";
-	};
-
-	rtc32k: oscillator@1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32000>;
-		clock-output-names = "rtc32k";
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu_thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <1000>; /* milliseconds */
-
-			thermal-sensors = <&thermal 0>;
-			sustainable-power = <1000>;
-
-			trips {
-				threshold: trip-point@0 {
-					temperature = <68000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				target: trip-point@1 {
-					temperature = <85000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu_crit: cpu_crit@0 {
-					temperature = <115000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	topckgen: syscon@10000000 {
-		compatible = "mediatek,mt2701-topckgen", "syscon";
-		reg = <0 0x10000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	infracfg: syscon@10001000 {
-		compatible = "mediatek,mt2701-infracfg", "syscon";
-		reg = <0 0x10001000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	pericfg: syscon@10003000 {
-		compatible = "mediatek,mt2701-pericfg", "syscon";
-		reg = <0 0x10003000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	syscfg_pctl_a: syscfg@10005000 {
-		compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon";
-		reg = <0 0x10005000 0 0x1000>;
-	};
-
-	scpsys: power-controller@10006000 {
-		compatible = "mediatek,mt2701-scpsys", "syscon";
-		#power-domain-cells = <1>;
-		reg = <0 0x10006000 0 0x1000>;
-		infracfg = <&infracfg>;
-		clocks = <&topckgen CLK_TOP_MM_SEL>,
-			 <&topckgen CLK_TOP_MFG_SEL>,
-			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "mm", "mfg", "ethif";
-	};
-
-	watchdog: watchdog@10007000 {
-		compatible = "mediatek,mt2701-wdt",
-			     "mediatek,mt6589-wdt";
-		reg = <0 0x10007000 0 0x100>;
-	};
-
-	timer: timer@10008000 {
-		compatible = "mediatek,mt2701-timer",
-			     "mediatek,mt6577-timer";
-		reg = <0 0x10008000 0 0x80>;
-		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>, <&rtc_clk>;
-		clock-names = "system-clk", "rtc-clk";
-	};
-
-	pio: pinctrl@1000b000 {
-		compatible = "mediatek,mt2701-pinctrl";
-		reg = <0 0x1000b000 0 0x1000>;
-		mediatek,pctl-regmap = <&syscfg_pctl_a>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	smi_common: smi@1000c000 {
-		compatible = "mediatek,mt2701-smi-common";
-		reg = <0 0x1000c000 0 0x1000>;
-		clocks = <&infracfg CLK_INFRA_SMI>,
-			 <&mmsys CLK_MM_SMI_COMMON>,
-			 <&infracfg CLK_INFRA_SMI>;
-		clock-names = "apb", "smi", "async";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
-	};
-
-	sysirq: interrupt-controller@10200100 {
-		compatible = "mediatek,mt2701-sysirq",
-			     "mediatek,mt6577-sysirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0 0x10200100 0 0x1c>;
-	};
-
-	cirq: interrupt-controller@10204000 {
-		compatible = "mediatek,mt2701-cirq",
-			     "mediatek,mtk-cirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&sysirq>;
-		reg = <0 0x10204000 0 0x400>;
-		mediatek,ext-irq-range = <32 200>;
-	};
-
-	iommu: mmsys_iommu@10205000 {
-		compatible = "mediatek,mt2701-m4u";
-		reg = <0 0x10205000 0 0x1000>;
-		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_M4U>;
-		clock-names = "bclk";
-		mediatek,larbs = <&larb0 &larb1 &larb2>;
-		#iommu-cells = <1>;
-	};
-
-	apmixedsys: syscon@10209000 {
-		compatible = "mediatek,mt2701-apmixedsys", "syscon";
-		reg = <0 0x10209000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	gic: interrupt-controller@10211000 {
-		compatible = "arm,cortex-a7-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0 0x10211000 0 0x1000>,
-		      <0 0x10212000 0 0x2000>,
-		      <0 0x10214000 0 0x2000>,
-		      <0 0x10216000 0 0x2000>;
-	};
-
-	auxadc: adc@11001000 {
-		compatible = "mediatek,mt2701-auxadc";
-		reg = <0 0x11001000 0 0x1000>;
-		clocks = <&pericfg CLK_PERI_AUXADC>;
-		clock-names = "main";
-		#io-channel-cells = <1>;
-		status = "disabled";
-	};
-
-	uart0: serial@11002000 {
-		compatible = "mediatek,mt2701-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11002000 0 0x400>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	uart1: serial@11003000 {
-		compatible = "mediatek,mt2701-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11003000 0 0x400>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	uart2: serial@11004000 {
-		compatible = "mediatek,mt2701-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11004000 0 0x400>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	uart3: serial@11005000 {
-		compatible = "mediatek,mt2701-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11005000 0 0x400>;
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	i2c0: i2c@11007000 {
-		compatible = "mediatek,mt2701-i2c",
-			     "mediatek,mt6577-i2c";
-		reg = <0 0x11007000 0 0x70>,
-		      <0 0x11000200 0 0x80>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
-		clock-div = <16>;
-		clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "main", "dma";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@11008000 {
-		compatible = "mediatek,mt2701-i2c",
-			     "mediatek,mt6577-i2c";
-		reg = <0 0x11008000 0 0x70>,
-		      <0 0x11000280 0 0x80>;
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
-		clock-div = <16>;
-		clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "main", "dma";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@11009000 {
-		compatible = "mediatek,mt2701-i2c",
-			     "mediatek,mt6577-i2c";
-		reg = <0 0x11009000 0 0x70>,
-		      <0 0x11000300 0 0x80>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
-		clock-div = <16>;
-		clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "main", "dma";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi0: spi@1100a000 {
-		compatible = "mediatek,mt2701-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x1100a000 0 0x100>;
-		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-			 <&topckgen CLK_TOP_SPI0_SEL>,
-			 <&pericfg CLK_PERI_SPI0>;
-		clock-names = "parent-clk", "sel-clk", "spi-clk";
-		status = "disabled";
-	};
-
-	thermal: thermal@1100b000 {
-		#thermal-sensor-cells = <0>;
-		compatible = "mediatek,mt2701-thermal";
-		reg = <0 0x1100b000 0 0x1000>;
-		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
-		clock-names = "therm", "auxadc";
-		resets = <&pericfg MT2701_PERI_THERM_SW_RST>;
-		reset-names = "therm";
-		mediatek,auxadc = <&auxadc>;
-		mediatek,apmixedsys = <&apmixedsys>;
-	};
-
-	nandc: nand-controller@1100d000 {
-		compatible = "mediatek,mt2701-nfc";
-		reg = <0 0x1100d000 0 0x1000>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_NFI>,
-			 <&pericfg CLK_PERI_NFI_PAD>;
-		clock-names = "nfi_clk", "pad_clk";
-		status = "disabled";
-		ecc-engine = <&bch>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	bch: ecc@1100e000 {
-		compatible = "mediatek,mt2701-ecc";
-		reg = <0 0x1100e000 0 0x1000>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_NFI_ECC>;
-		clock-names = "nfiecc_clk";
-		status = "disabled";
-	};
-
-	nor_flash: spi@11014000 {
-		compatible = "mediatek,mt2701-nor",
-			     "mediatek,mt8173-nor";
-		reg = <0 0x11014000 0 0xe0>;
-		clocks = <&pericfg CLK_PERI_FLASH>,
-			 <&topckgen CLK_TOP_FLASH_SEL>;
-		clock-names = "spi", "sf";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi1: spi@11016000 {
-		compatible = "mediatek,mt2701-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x11016000 0 0x100>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-			 <&topckgen CLK_TOP_SPI1_SEL>,
-			 <&pericfg CLK_PERI_SPI1>;
-		clock-names = "parent-clk", "sel-clk", "spi-clk";
-		status = "disabled";
-	};
-
-	spi2: spi@11017000 {
-		compatible = "mediatek,mt2701-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x11017000 0 0x1000>;
-		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-			 <&topckgen CLK_TOP_SPI2_SEL>,
-			 <&pericfg CLK_PERI_SPI2>;
-		clock-names = "parent-clk", "sel-clk", "spi-clk";
-		status = "disabled";
-	};
-
-	audsys: clock-controller@11220000 {
-		compatible = "mediatek,mt2701-audsys", "syscon";
-		reg = <0 0x11220000 0 0x2000>;
-		#clock-cells = <1>;
-
-		afe: audio-controller {
-			compatible = "mediatek,mt2701-audio";
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
-				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-names = "afe", "asys";
-			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-
-			clocks = <&infracfg CLK_INFRA_AUDIO>,
-				 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-				 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-				 <&topckgen CLK_TOP_AUD_48K_TIMING>,
-				 <&topckgen CLK_TOP_AUD_44K_TIMING>,
-				 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
-				 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
-				 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
-				 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
-				 <&audsys CLK_AUD_I2SO1>,
-				 <&audsys CLK_AUD_I2SO2>,
-				 <&audsys CLK_AUD_I2SO3>,
-				 <&audsys CLK_AUD_I2SO4>,
-				 <&audsys CLK_AUD_I2SIN1>,
-				 <&audsys CLK_AUD_I2SIN2>,
-				 <&audsys CLK_AUD_I2SIN3>,
-				 <&audsys CLK_AUD_I2SIN4>,
-				 <&audsys CLK_AUD_ASRCO1>,
-				 <&audsys CLK_AUD_ASRCO2>,
-				 <&audsys CLK_AUD_ASRCO3>,
-				 <&audsys CLK_AUD_ASRCO4>,
-				 <&audsys CLK_AUD_AFE>,
-				 <&audsys CLK_AUD_AFE_CONN>,
-				 <&audsys CLK_AUD_A1SYS>,
-				 <&audsys CLK_AUD_A2SYS>,
-				 <&audsys CLK_AUD_AFE_MRGIF>;
-
-			clock-names = "infra_sys_audio_clk",
-				      "top_audio_mux1_sel",
-				      "top_audio_mux2_sel",
-				      "top_audio_a1sys_hp",
-				      "top_audio_a2sys_hp",
-				      "i2s0_src_sel",
-				      "i2s1_src_sel",
-				      "i2s2_src_sel",
-				      "i2s3_src_sel",
-				      "i2s0_src_div",
-				      "i2s1_src_div",
-				      "i2s2_src_div",
-				      "i2s3_src_div",
-				      "i2s0_mclk_en",
-				      "i2s1_mclk_en",
-				      "i2s2_mclk_en",
-				      "i2s3_mclk_en",
-				      "i2so0_hop_ck",
-				      "i2so1_hop_ck",
-				      "i2so2_hop_ck",
-				      "i2so3_hop_ck",
-				      "i2si0_hop_ck",
-				      "i2si1_hop_ck",
-				      "i2si2_hop_ck",
-				      "i2si3_hop_ck",
-				      "asrc0_out_ck",
-				      "asrc1_out_ck",
-				      "asrc2_out_ck",
-				      "asrc3_out_ck",
-				      "audio_afe_pd",
-				      "audio_afe_conn_pd",
-				      "audio_a1sys_pd",
-				      "audio_a2sys_pd",
-				      "audio_mrgif_pd";
-
-			assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-					  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-					  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
-					  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
-			assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
-						 <&topckgen CLK_TOP_AUD2PLL_90M>;
-			assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
-		};
-	};
-
-	mmsys: syscon@14000000 {
-		compatible = "mediatek,mt2701-mmsys", "syscon";
-		reg = <0 0x14000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	bls: pwm@1400a000 {
-		compatible = "mediatek,mt2701-disp-pwm";
-		reg = <0 0x1400a000 0 0x1000>;
-		#pwm-cells = <2>;
-		clocks = <&mmsys CLK_MM_MDP_BLS_26M>, <&mmsys CLK_MM_DISP_BLS>;
-		clock-names = "main", "mm";
-		status = "disabled";
-	};
-
-	larb0: larb@14010000 {
-		compatible = "mediatek,mt2701-smi-larb";
-		reg = <0 0x14010000 0 0x1000>;
-		mediatek,smi = <&smi_common>;
-		mediatek,larb-id = <0>;
-		clocks = <&mmsys CLK_MM_SMI_LARB0>,
-			 <&mmsys CLK_MM_SMI_LARB0>;
-		clock-names = "apb", "smi";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
-	};
-
-	imgsys: syscon@15000000 {
-		compatible = "mediatek,mt2701-imgsys", "syscon";
-		reg = <0 0x15000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	larb2: larb@15001000 {
-		compatible = "mediatek,mt2701-smi-larb";
-		reg = <0 0x15001000 0 0x1000>;
-		mediatek,smi = <&smi_common>;
-		mediatek,larb-id = <2>;
-		clocks = <&imgsys CLK_IMG_SMI_COMM>,
-			 <&imgsys CLK_IMG_SMI_COMM>;
-		clock-names = "apb", "smi";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-	};
-
-	jpegdec: jpegdec@15004000 {
-		compatible = "mediatek,mt2701-jpgdec";
-		reg = <0 0x15004000 0 0x1000>;
-		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
-			  <&imgsys CLK_IMG_JPGDEC>;
-		clock-names = "jpgdec-smi",
-			      "jpgdec";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
-			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
-	};
-
-	jpegenc: jpegenc@1500a000 {
-		compatible = "mediatek,mt2701-jpgenc",
-			     "mediatek,mtk-jpgenc";
-		reg = <0 0x1500a000 0 0x1000>;
-		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&imgsys CLK_IMG_VENC>;
-		clock-names = "jpgenc";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
-			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
-	};
-
-	vdecsys: syscon@16000000 {
-		compatible = "mediatek,mt2701-vdecsys", "syscon";
-		reg = <0 0x16000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	larb1: larb@16010000 {
-		compatible = "mediatek,mt2701-smi-larb";
-		reg = <0 0x16010000 0 0x1000>;
-		mediatek,smi = <&smi_common>;
-		mediatek,larb-id = <1>;
-		clocks = <&vdecsys CLK_VDEC_CKGEN>,
-			 <&vdecsys CLK_VDEC_LARB>;
-		clock-names = "apb", "smi";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
-	};
-
-	hifsys: syscon@1a000000 {
-		compatible = "mediatek,mt2701-hifsys", "syscon";
-		reg = <0 0x1a000000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb0: usb@1a1c0000 {
-		compatible = "mediatek,mt2701-xhci", "mediatek,mtk-xhci";
-		reg = <0 0x1a1c0000 0 0x1000>,
-		      <0 0x1a1c4700 0 0x0100>;
-		reg-names = "mac", "ippc";
-		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
-			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "sys_ck", "ref_ck";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
-		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
-		status = "disabled";
-	};
-
-	u3phy0: t-phy@1a1c4000 {
-		compatible = "mediatek,mt2701-tphy",
-			     "mediatek,generic-tphy-v1";
-		reg = <0 0x1a1c4000 0 0x0700>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		status = "disabled";
-
-		u2port0: usb-phy@1a1c4800 {
-			reg = <0 0x1a1c4800 0 0x0100>;
-			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
-			clock-names = "ref";
-			#phy-cells = <1>;
-			status = "okay";
-		};
-
-		u3port0: usb-phy@1a1c4900 {
-			reg = <0 0x1a1c4900 0 0x0700>;
-			clocks = <&clk26m>;
-			clock-names = "ref";
-			#phy-cells = <1>;
-			status = "okay";
-		};
-	};
-
-	usb1: usb@1a240000 {
-		compatible = "mediatek,mt2701-xhci", "mediatek,mtk-xhci";
-		reg = <0 0x1a240000 0 0x1000>,
-		      <0 0x1a244700 0 0x0100>;
-		reg-names = "mac", "ippc";
-		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
-			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "sys_ck", "ref_ck";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
-		phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
-		status = "disabled";
-	};
-
-	u3phy1: t-phy@1a244000 {
-		compatible = "mediatek,mt2701-tphy",
-			     "mediatek,generic-tphy-v1";
-		reg = <0 0x1a244000 0 0x0700>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		status = "disabled";
-
-		u2port1: usb-phy@1a244800 {
-			reg = <0 0x1a244800 0 0x0100>;
-			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
-			clock-names = "ref";
-			#phy-cells = <1>;
-			status = "okay";
-		};
-
-		u3port1: usb-phy@1a244900 {
-			reg = <0 0x1a244900 0 0x0700>;
-			clocks = <&clk26m>;
-			clock-names = "ref";
-			#phy-cells = <1>;
-			status = "okay";
-		};
-	};
-
-	usb2: usb@11200000 {
-		compatible = "mediatek,mt2701-musb",
-			     "mediatek,mtk-musb";
-		reg = <0 0x11200000 0 0x1000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "mc";
-		phys = <&u2port2 PHY_TYPE_USB2>;
-		dr_mode = "otg";
-		clocks = <&pericfg CLK_PERI_USB0>,
-			 <&pericfg CLK_PERI_USB0_MCU>,
-			 <&pericfg CLK_PERI_USB_SLV>;
-		clock-names = "main","mcu","univpll";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-		status = "disabled";
-	};
-
-	u2phy0: t-phy@11210000 {
-		compatible = "mediatek,mt2701-tphy",
-			     "mediatek,generic-tphy-v1";
-		reg = <0 0x11210000 0 0x0800>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		status = "okay";
-
-		u2port2: usb-phy@1a1c4800 {
-			reg = <0 0x11210800 0 0x0100>;
-			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
-			clock-names = "ref";
-			#phy-cells = <1>;
-			status = "okay";
-		};
-	};
-
-	ethsys: syscon@1b000000 {
-		compatible = "mediatek,mt2701-ethsys", "syscon";
-		reg = <0 0x1b000000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	eth: ethernet@1b100000 {
-		compatible = "mediatek,mt2701-eth", "syscon";
-		reg = <0 0x1b100000 0 0x20000>;
-		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
-			 <&ethsys CLK_ETHSYS_ESW>,
-			 <&ethsys CLK_ETHSYS_GP1>,
-			 <&ethsys CLK_ETHSYS_GP2>,
-			 <&apmixedsys CLK_APMIXED_TRGPLL>;
-		clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
-		resets = <&ethsys MT2701_ETHSYS_FE_RST>,
-			 <&ethsys MT2701_ETHSYS_GMAC_RST>,
-			 <&ethsys MT2701_ETHSYS_PPE_RST>;
-		reset-names = "fe", "gmac", "ppe";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-		mediatek,ethsys = <&ethsys>;
-		mediatek,pctl = <&syscfg_pctl_a>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	bdpsys: syscon@1c000000 {
-		compatible = "mediatek,mt2701-bdpsys", "syscon";
-		reg = <0 0x1c000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-};
diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
deleted file mode 100644
index 7fda40ab5fe83..0000000000000
--- a/arch/arm/boot/dts/mt6323.dtsi
+++ /dev/null
@@ -1,269 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2017-2018 MediaTek Inc.
- * Author: John Crispin <john@phrozen.org>
- *	   Sean Wang <sean.wang@mediatek.com>
- *
- */
-
-&pwrap {
-	pmic: mt6323 {
-		compatible = "mediatek,mt6323";
-		interrupt-parent = <&pio>;
-		interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		mt6323_leds: leds {
-			compatible = "mediatek,mt6323-led";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mt6323regulator: mt6323regulator{
-			compatible = "mediatek,mt6323-regulator";
-
-			mt6323_vproc_reg: buck_vproc{
-				regulator-name = "vproc";
-				regulator-min-microvolt = < 700000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <12500>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			mt6323_vsys_reg: buck_vsys{
-				regulator-name = "vsys";
-				regulator-min-microvolt = <1400000>;
-				regulator-max-microvolt = <2987500>;
-				regulator-ramp-delay = <25000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			mt6323_vpa_reg: buck_vpa{
-				regulator-name = "vpa";
-				regulator-min-microvolt = < 500000>;
-				regulator-max-microvolt = <3650000>;
-			};
-
-			mt6323_vtcxo_reg: ldo_vtcxo{
-				regulator-name = "vtcxo";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-enable-ramp-delay = <90>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			mt6323_vcn28_reg: ldo_vcn28{
-				regulator-name = "vcn28";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-enable-ramp-delay = <185>;
-			};
-
-			mt6323_vcn33_bt_reg: ldo_vcn33_bt{
-				regulator-name = "vcn33_bt";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-enable-ramp-delay = <185>;
-			};
-
-			mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
-				regulator-name = "vcn33_wifi";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-enable-ramp-delay = <185>;
-			};
-
-			mt6323_va_reg: ldo_va{
-				regulator-name = "va";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-enable-ramp-delay = <216>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			mt6323_vcama_reg: ldo_vcama{
-				regulator-name = "vcama";
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-enable-ramp-delay = <216>;
-			};
-
-			mt6323_vio28_reg: ldo_vio28{
-				regulator-name = "vio28";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-enable-ramp-delay = <216>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			mt6323_vusb_reg: ldo_vusb{
-				regulator-name = "vusb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <216>;
-				regulator-boot-on;
-			};
-
-			mt6323_vmc_reg: ldo_vmc{
-				regulator-name = "vmc";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <36>;
-				regulator-boot-on;
-			};
-
-			mt6323_vmch_reg: ldo_vmch{
-				regulator-name = "vmch";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <36>;
-				regulator-boot-on;
-			};
-
-			mt6323_vemc3v3_reg: ldo_vemc3v3{
-				regulator-name = "vemc3v3";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <36>;
-				regulator-boot-on;
-			};
-
-			mt6323_vgp1_reg: ldo_vgp1{
-				regulator-name = "vgp1";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <216>;
-			};
-
-			mt6323_vgp2_reg: ldo_vgp2{
-				regulator-name = "vgp2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-enable-ramp-delay = <216>;
-			};
-
-			mt6323_vgp3_reg: ldo_vgp3{
-				regulator-name = "vgp3";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-enable-ramp-delay = <216>;
-			};
-
-			mt6323_vcn18_reg: ldo_vcn18{
-				regulator-name = "vcn18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-enable-ramp-delay = <216>;
-			};
-
-			mt6323_vsim1_reg: ldo_vsim1{
-				regulator-name = "vsim1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-enable-ramp-delay = <216>;
-			};
-
-			mt6323_vsim2_reg: ldo_vsim2{
-				regulator-name = "vsim2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-enable-ramp-delay = <216>;
-			};
-
-			mt6323_vrtc_reg: ldo_vrtc{
-				regulator-name = "vrtc";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			mt6323_vcamaf_reg: ldo_vcamaf{
-				regulator-name = "vcamaf";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <216>;
-			};
-
-			mt6323_vibr_reg: ldo_vibr{
-				regulator-name = "vibr";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <36>;
-			};
-
-			mt6323_vrf18_reg: ldo_vrf18{
-				regulator-name = "vrf18";
-				regulator-min-microvolt = <1825000>;
-				regulator-max-microvolt = <1825000>;
-				regulator-enable-ramp-delay = <187>;
-			};
-
-			mt6323_vm_reg: ldo_vm{
-				regulator-name = "vm";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-enable-ramp-delay = <216>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			mt6323_vio18_reg: ldo_vio18{
-				regulator-name = "vio18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-enable-ramp-delay = <216>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			mt6323_vcamd_reg: ldo_vcamd{
-				regulator-name = "vcamd";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-enable-ramp-delay = <216>;
-			};
-
-			mt6323_vcamio_reg: ldo_vcamio{
-				regulator-name = "vcamio";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-enable-ramp-delay = <216>;
-			};
-		};
-
-		mt6323keys: mt6323keys {
-			compatible = "mediatek,mt6323-keys";
-			mediatek,long-press-mode = <1>;
-			power-off-time-sec = <0>;
-
-			power {
-				linux,keycodes = <116>;
-				wakeup-source;
-			};
-
-			home {
-				linux,keycodes = <114>;
-			};
-		};
-
-		codec: mt6397codec {
-			compatible = "mediatek,mt6397-codec";
-		};
-
-		power-controller {
-			compatible = "mediatek,mt6323-pwrc";
-		};
-
-		rtc {
-			compatible = "mediatek,mt6323-rtc";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts b/arch/arm/boot/dts/mt6580-evbp1.dts
deleted file mode 100644
index 755a0774a8eeb..0000000000000
--- a/arch/arm/boot/dts/mt6580-evbp1.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2015 MediaTek Inc.
- * Author: Mars.C <mars.cheng@mediatek.com>
- *
- */
-
-/dts-v1/;
-#include "mt6580.dtsi"
-
-/ {
-	model = "MediaTek MT6580 evaluation board";
-	compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:921600n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi
deleted file mode 100644
index 9e17698c06093..0000000000000
--- a/arch/arm/boot/dts/mt6580.dtsi
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2015 MediaTek Inc.
- * Author: Mars.C <mars.cheng@mediatek.com>
- *
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	compatible = "mediatek,mt6580";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&sysirq>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x3>;
-		};
-
-	};
-
-	system_clk: dummy13m {
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-		#clock-cells = <0>;
-	};
-
-	rtc_clk: dummy32k {
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-		#clock-cells = <0>;
-	};
-
-	uart_clk: dummy26m {
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-		#clock-cells = <0>;
-	};
-
-	timer: timer@10008000 {
-		compatible = "mediatek,mt6580-timer",
-			     "mediatek,mt6577-timer";
-		reg = <0x10008000 0x80>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>, <&rtc_clk>;
-		clock-names = "system-clk", "rtc-clk";
-	};
-
-	sysirq: interrupt-controller@10200100 {
-		compatible = "mediatek,mt6580-sysirq",
-			     "mediatek,mt6577-sysirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0x10200100 0x1c>;
-	};
-
-	gic: interrupt-controller@10211000 {
-		compatible = "arm,cortex-a7-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0x10211000 0x1000>,
-		      <0x10212000 0x2000>,
-		      <0x10214000 0x2000>,
-		      <0x10216000 0x2000>;
-	};
-
-	uart0: serial@11005000 {
-		compatible = "mediatek,mt6580-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0x11005000 0x400>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
-
-	uart1: serial@11006000 {
-		compatible = "mediatek,mt6580-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0x11006000 0x400>;
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts b/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts
deleted file mode 100644
index b057e037f9407..0000000000000
--- a/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
- */
-
-/dts-v1/;
-#include "mt6582.dtsi"
-
-/ {
-	model = "Prestigio PMT5008 3G";
-	compatible = "prestigio,pmt5008-3g", "mediatek,mt6582";
-
-	aliases {
-		bootargs = "console=ttyS0,921600n8 earlyprintk";
-		serial0 = &uart0;
-		serial3 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial0:921600n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt6582.dtsi b/arch/arm/boot/dts/mt6582.dtsi
deleted file mode 100644
index 4263371784cd1..0000000000000
--- a/arch/arm/boot/dts/mt6582.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "mediatek,mt6582";
-	interrupt-parent = <&sysirq>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x3>;
-		};
-	};
-
-	system_clk: dummy13m {
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-		#clock-cells = <0>;
-	};
-
-	rtc_clk: dummy32k {
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-		#clock-cells = <0>;
-	};
-
-	uart_clk: dummy26m {
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-		#clock-cells = <0>;
-	};
-
-	timer: timer@11008000 {
-		compatible = "mediatek,mt6577-timer";
-		reg = <0x10008000 0x80>;
-		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>, <&rtc_clk>;
-		clock-names = "system-clk", "rtc-clk";
-	};
-
-	sysirq: interrupt-controller@10200100 {
-		compatible = "mediatek,mt6582-sysirq",
-			     "mediatek,mt6577-sysirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0x10200100 0x1c>;
-	};
-
-	gic: interrupt-controller@10211000 {
-		compatible = "arm,cortex-a7-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0x10211000 0x1000>,
-		      <0x10212000 0x2000>,
-		      <0x10214000 0x2000>,
-		      <0x10216000 0x2000>;
-	};
-
-	uart0: serial@11002000 {
-		compatible = "mediatek,mt6582-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0x11002000 0x400>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
-
-	uart1: serial@11003000 {
-		compatible = "mediatek,mt6582-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0x11003000 0x400>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
-
-	uart2: serial@11004000 {
-		compatible = "mediatek,mt6582-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0x11004000 0x400>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
-
-	uart3: serial@11005000 {
-		compatible = "mediatek,mt6582-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0x11005000 0x400>;
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
-
-	watchdog: watchdog@10007000 {
-		compatible = "mediatek,mt6582-wdt",
-			     "mediatek,mt6589-wdt";
-		reg = <0x10007000 0x100>;
-	};
-};
diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts
deleted file mode 100644
index 1e7079a3b449f..0000000000000
--- a/arch/arm/boot/dts/mt6589-aquaris5.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (c) 2014 MundoReader S.L.
- * Author: Matthias Brugger <matthias.bgg@gmail.com>
- *
- */
-
-/dts-v1/;
-#include "mt6589.dtsi"
-
-/ {
-	model = "bq Aquaris5";
-	compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
-
-	chosen {
-		bootargs = "console=ttyS0,921600n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt6589-fairphone-fp1.dts b/arch/arm/boot/dts/mt6589-fairphone-fp1.dts
deleted file mode 100644
index c952347981de7..0000000000000
--- a/arch/arm/boot/dts/mt6589-fairphone-fp1.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
- */
-
-/dts-v1/;
-#include "mt6589.dtsi"
-
-/ {
-	model = "Fairphone 1";
-	compatible = "fairphone,fp1", "mediatek,mt6589";
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-};
-
-&cpus {
-	/* SMP is not stable on this board, makes the kernel panic */
-	/delete-property/ enable-method;
-};
-
-&uart3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi
deleted file mode 100644
index c6babc8ad2ba6..0000000000000
--- a/arch/arm/boot/dts/mt6589.dtsi
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (c) 2014 MundoReader S.L.
- * Author: Matthias Brugger <matthias.bgg@gmail.com>
- *
-*/
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "mediatek,mt6589";
-	interrupt-parent = <&sysirq>;
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "mediatek,mt6589-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x3>;
-		};
-
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		system_clk: dummy13m {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-			#clock-cells = <0>;
-		};
-
-		rtc_clk: dummy32k {
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-			#clock-cells = <0>;
-		};
-
-		uart_clk: dummy26m {
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-			#clock-cells = <0>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		timer: timer@10008000 {
-			compatible = "mediatek,mt6577-timer";
-			reg = <0x10008000 0x80>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&system_clk>, <&rtc_clk>;
-			clock-names = "system-clk", "rtc-clk";
-		};
-
-		sysirq: interrupt-controller@10200100 {
-			compatible = "mediatek,mt6589-sysirq",
-				     "mediatek,mt6577-sysirq";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			reg = <0x10200100 0x1c>;
-		};
-
-		gic: interrupt-controller@10211000 {
-			compatible = "arm,cortex-a7-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			reg = <0x10211000 0x1000>,
-			      <0x10212000 0x2000>,
-			      <0x10214000 0x2000>,
-			      <0x10216000 0x2000>;
-		};
-
-		uart0: serial@11006000 {
-			compatible = "mediatek,mt6577-uart";
-			reg = <0x11006000 0x400>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
-			status = "disabled";
-		};
-
-		uart1: serial@11007000 {
-			compatible = "mediatek,mt6577-uart";
-			reg = <0x11007000 0x400>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
-			status = "disabled";
-		};
-
-		uart2: serial@11008000 {
-			compatible = "mediatek,mt6577-uart";
-			reg = <0x11008000 0x400>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
-			status = "disabled";
-		};
-
-		uart3: serial@11009000 {
-			compatible = "mediatek,mt6577-uart";
-			reg = <0x11009000 0x400>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
-			status = "disabled";
-		};
-
-		wdt: watchdog@10000000 {
-			compatible = "mediatek,mt6589-wdt";
-			reg = <0x10000000 0x44>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mt6592-evb.dts b/arch/arm/boot/dts/mt6592-evb.dts
deleted file mode 100644
index 5e00c1cca2d12..0000000000000
--- a/arch/arm/boot/dts/mt6592-evb.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2014 MediaTek Inc.
- * Author: Howard Chen <ibanezchen@gmail.com>
- *
- */
-
-/dts-v1/;
-#include "mt6592.dtsi"
-
-/ {
-	model = "mt6592 evb";
-	compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mt6592.dtsi
deleted file mode 100644
index 3716f8db951ca..0000000000000
--- a/arch/arm/boot/dts/mt6592.dtsi
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2014 MediaTek Inc.
- * Author: Howard Chen <ibanezchen@gmail.com>
- *
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "mediatek,mt6592";
-	interrupt-parent = <&sysirq>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x3>;
-		};
-		cpu@4 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x4>;
-		};
-		cpu@5 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x5>;
-		};
-		cpu@6 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x6>;
-		};
-		cpu@7 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x7>;
-		};
-	};
-
-	system_clk: dummy13m {
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-		#clock-cells = <0>;
-	};
-
-	rtc_clk: dummy32k {
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-		#clock-cells = <0>;
-	};
-
-	uart_clk: dummy26m {
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-		#clock-cells = <0>;
-	};
-
-	timer: timer@10008000 {
-		compatible = "mediatek,mt6577-timer";
-		reg = <0x10008000 0x80>;
-		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>, <&rtc_clk>;
-		clock-names = "system-clk", "rtc-clk";
-	};
-
-	sysirq: interrupt-controller@10200220 {
-		compatible = "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0x10200220 0x1c>;
-	};
-
-	gic: interrupt-controller@10211000 {
-		compatible = "arm,cortex-a7-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0x10211000 0x1000>,
-		      <0x10212000 0x1000>;
-	};
-
-	uart0: serial@11002000 {
-		compatible = "mediatek,mt6577-uart";
-		reg = <0x11002000 0x400>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
-
-	uart1: serial@11003000 {
-		compatible = "mediatek,mt6577-uart";
-		reg = <0x11003000 0x400>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
-
-	uart2: serial@11004000 {
-		compatible = "mediatek,mt6577-uart";
-		reg = <0x11004000 0x400>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
-
-	uart3: serial@11005000 {
-		compatible = "mediatek,mt6577-uart";
-		reg = <0x11005000 0x400>;
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
deleted file mode 100644
index 11379c3e6b4ca..0000000000000
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ /dev/null
@@ -1,1301 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2017-2018 MediaTek Inc.
- * Author: John Crispin <john@phrozen.org>
- *	   Sean Wang <sean.wang@mediatek.com>
- *	   Ryder Lee <ryder.lee@mediatek.com>
- *
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/mt2701-clk.h>
-#include <dt-bindings/pinctrl/mt7623-pinfunc.h>
-#include <dt-bindings/power/mt2701-power.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/reset/mt2701-resets.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	compatible = "mediatek,mt7623";
-	interrupt-parent = <&sysirq>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpu_opp_table: opp-table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-98000000 {
-			opp-hz = /bits/ 64 <98000000>;
-			opp-microvolt = <1050000>;
-		};
-
-		opp-198000000 {
-			opp-hz = /bits/ 64 <198000000>;
-			opp-microvolt = <1050000>;
-		};
-
-		opp-398000000 {
-			opp-hz = /bits/ 64 <398000000>;
-			opp-microvolt = <1050000>;
-		};
-
-		opp-598000000 {
-			opp-hz = /bits/ 64 <598000000>;
-			opp-microvolt = <1050000>;
-		};
-
-		opp-747500000 {
-			opp-hz = /bits/ 64 <747500000>;
-			opp-microvolt = <1050000>;
-		};
-
-		opp-1040000000 {
-			opp-hz = /bits/ 64 <1040000000>;
-			opp-microvolt = <1150000>;
-		};
-
-		opp-1196000000 {
-			opp-hz = /bits/ 64 <1196000000>;
-			opp-microvolt = <1200000>;
-		};
-
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1300000>;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "mediatek,mt6589-smp";
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			clocks = <&infracfg CLK_INFRA_CPUSEL>,
-				 <&apmixedsys CLK_APMIXED_MAINPLL>;
-			clock-names = "cpu", "intermediate";
-			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>;
-			clock-frequency = <1300000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-			clocks = <&infracfg CLK_INFRA_CPUSEL>,
-				 <&apmixedsys CLK_APMIXED_MAINPLL>;
-			clock-names = "cpu", "intermediate";
-			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>;
-			clock-frequency = <1300000000>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-			clocks = <&infracfg CLK_INFRA_CPUSEL>,
-				 <&apmixedsys CLK_APMIXED_MAINPLL>;
-			clock-names = "cpu", "intermediate";
-			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>;
-			clock-frequency = <1300000000>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x3>;
-			clocks = <&infracfg CLK_INFRA_CPUSEL>,
-				 <&apmixedsys CLK_APMIXED_MAINPLL>;
-			clock-names = "cpu", "intermediate";
-			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>;
-			clock-frequency = <1300000000>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	system_clk: dummy13m {
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-		#clock-cells = <0>;
-	};
-
-	rtc32k: oscillator-1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32000>;
-		clock-output-names = "rtc32k";
-	};
-
-	clk26m: oscillator-0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-		clock-output-names = "clk26m";
-	};
-
-	thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <1000>;
-				polling-delay = <1000>;
-
-				thermal-sensors = <&thermal 0>;
-
-				trips {
-					cpu_passive: cpu-passive {
-						temperature = <57000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					cpu_active: cpu-active {
-						temperature = <67000>;
-						hysteresis = <2000>;
-						type = "active";
-					};
-
-					cpu_hot: cpu-hot {
-						temperature = <87000>;
-						hysteresis = <2000>;
-						type = "hot";
-					};
-
-					cpu-crit {
-						temperature = <107000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu_passive>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-
-				map1 {
-					trip = <&cpu_active>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-
-				map2 {
-					trip = <&cpu_hot>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		clock-frequency = <13000000>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	topckgen: syscon@10000000 {
-		compatible = "mediatek,mt7623-topckgen",
-			     "mediatek,mt2701-topckgen",
-			     "syscon";
-		reg = <0 0x10000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	infracfg: syscon@10001000 {
-		compatible = "mediatek,mt7623-infracfg",
-			     "mediatek,mt2701-infracfg",
-			     "syscon";
-		reg = <0 0x10001000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	pericfg: syscon@10003000 {
-		compatible = "mediatek,mt7623-pericfg",
-			      "mediatek,mt2701-pericfg",
-			      "syscon";
-		reg = <0 0x10003000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	pio: pinctrl@10005000 {
-		compatible = "mediatek,mt7623-pinctrl";
-		reg = <0 0x1000b000 0 0x1000>;
-		mediatek,pctl-regmap = <&syscfg_pctl_a>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	syscfg_pctl_a: syscfg@10005000 {
-		compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
-		reg = <0 0x10005000 0 0x1000>;
-	};
-
-	scpsys: power-controller@10006000 {
-		compatible = "mediatek,mt7623-scpsys",
-			     "mediatek,mt2701-scpsys",
-			     "syscon";
-		#power-domain-cells = <1>;
-		reg = <0 0x10006000 0 0x1000>;
-		infracfg = <&infracfg>;
-		clocks = <&topckgen CLK_TOP_MM_SEL>,
-			 <&topckgen CLK_TOP_MFG_SEL>,
-			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "mm", "mfg", "ethif";
-	};
-
-	watchdog: watchdog@10007000 {
-		compatible = "mediatek,mt7623-wdt",
-			     "mediatek,mt6589-wdt";
-		reg = <0 0x10007000 0 0x100>;
-	};
-
-	timer: timer@10008000 {
-		compatible = "mediatek,mt7623-timer",
-			     "mediatek,mt6577-timer";
-		reg = <0 0x10008000 0 0x80>;
-		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>, <&rtc32k>;
-		clock-names = "system-clk", "rtc-clk";
-	};
-
-	pwrap: pwrap@1000d000 {
-		compatible = "mediatek,mt7623-pwrap",
-			     "mediatek,mt2701-pwrap";
-		reg = <0 0x1000d000 0 0x1000>;
-		reg-names = "pwrap";
-		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-		resets = <&infracfg MT2701_INFRA_PMIC_WRAP_RST>;
-		reset-names = "pwrap";
-		clocks = <&infracfg CLK_INFRA_PMICSPI>,
-			 <&infracfg CLK_INFRA_PMICWRAP>;
-		clock-names = "spi", "wrap";
-	};
-
-	cir: cir@10013000 {
-		compatible = "mediatek,mt7623-cir";
-		reg = <0 0x10013000 0 0x1000>;
-		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_IRRX>;
-		clock-names = "clk";
-		status = "disabled";
-	};
-
-	sysirq: interrupt-controller@10200100 {
-		compatible = "mediatek,mt7623-sysirq",
-			     "mediatek,mt6577-sysirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0 0x10200100 0 0x1c>;
-	};
-
-	efuse: efuse@10206000 {
-		compatible = "mediatek,mt7623-efuse",
-			     "mediatek,mt8173-efuse";
-		reg = <0 0x10206000 0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		thermal_calibration_data: calib@424 {
-			reg = <0x424 0xc>;
-		};
-	};
-
-	apmixedsys: syscon@10209000 {
-		compatible = "mediatek,mt7623-apmixedsys",
-			     "mediatek,mt2701-apmixedsys",
-			     "syscon";
-		reg = <0 0x10209000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	rng: rng@1020f000 {
-		compatible = "mediatek,mt7623-rng";
-		reg = <0 0x1020f000 0 0x1000>;
-		clocks = <&infracfg CLK_INFRA_TRNG>;
-		clock-names = "rng";
-	};
-
-	gic: interrupt-controller@10211000 {
-		compatible = "arm,cortex-a7-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0 0x10211000 0 0x1000>,
-		      <0 0x10212000 0 0x2000>,
-		      <0 0x10214000 0 0x2000>,
-		      <0 0x10216000 0 0x2000>;
-	};
-
-	auxadc: adc@11001000 {
-		compatible = "mediatek,mt7623-auxadc",
-			     "mediatek,mt2701-auxadc";
-		reg = <0 0x11001000 0 0x1000>;
-		clocks = <&pericfg CLK_PERI_AUXADC>;
-		clock-names = "main";
-		#io-channel-cells = <1>;
-	};
-
-	uart0: serial@11002000 {
-		compatible = "mediatek,mt7623-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11002000 0 0x400>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART0_SEL>,
-			 <&pericfg CLK_PERI_UART0>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	uart1: serial@11003000 {
-		compatible = "mediatek,mt7623-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11003000 0 0x400>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART1_SEL>,
-			 <&pericfg CLK_PERI_UART1>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	uart2: serial@11004000 {
-		compatible = "mediatek,mt7623-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11004000 0 0x400>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART2_SEL>,
-			 <&pericfg CLK_PERI_UART2>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	uart3: serial@11005000 {
-		compatible = "mediatek,mt7623-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11005000 0 0x400>;
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART3_SEL>,
-			 <&pericfg CLK_PERI_UART3>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	pwm: pwm@11006000 {
-		compatible = "mediatek,mt7623-pwm";
-		reg = <0 0x11006000 0 0x1000>;
-		#pwm-cells = <2>;
-		clocks = <&topckgen CLK_TOP_PWM_SEL>,
-			 <&pericfg CLK_PERI_PWM>,
-			 <&pericfg CLK_PERI_PWM1>,
-			 <&pericfg CLK_PERI_PWM2>,
-			 <&pericfg CLK_PERI_PWM3>,
-			 <&pericfg CLK_PERI_PWM4>,
-			 <&pericfg CLK_PERI_PWM5>;
-		clock-names = "top", "main", "pwm1", "pwm2",
-			      "pwm3", "pwm4", "pwm5";
-		status = "disabled";
-	};
-
-	i2c0: i2c@11007000 {
-		compatible = "mediatek,mt7623-i2c",
-			     "mediatek,mt6577-i2c";
-		reg = <0 0x11007000 0 0x70>,
-		      <0 0x11000200 0 0x80>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
-		clock-div = <16>;
-		clocks = <&pericfg CLK_PERI_I2C0>,
-			 <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "main", "dma";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@11008000 {
-		compatible = "mediatek,mt7623-i2c",
-			     "mediatek,mt6577-i2c";
-		reg = <0 0x11008000 0 0x70>,
-		      <0 0x11000280 0 0x80>;
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
-		clock-div = <16>;
-		clocks = <&pericfg CLK_PERI_I2C1>,
-			 <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "main", "dma";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@11009000 {
-		compatible = "mediatek,mt7623-i2c",
-			     "mediatek,mt6577-i2c";
-		reg = <0 0x11009000 0 0x70>,
-		      <0 0x11000300 0 0x80>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
-		clock-div = <16>;
-		clocks = <&pericfg CLK_PERI_I2C2>,
-			 <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "main", "dma";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi0: spi@1100a000 {
-		compatible = "mediatek,mt7623-spi",
-			     "mediatek,mt2701-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x1100a000 0 0x100>;
-		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-			 <&topckgen CLK_TOP_SPI0_SEL>,
-			 <&pericfg CLK_PERI_SPI0>;
-		clock-names = "parent-clk", "sel-clk", "spi-clk";
-		status = "disabled";
-	};
-
-	thermal: thermal@1100b000 {
-		#thermal-sensor-cells = <1>;
-		compatible = "mediatek,mt7623-thermal",
-			     "mediatek,mt2701-thermal";
-		reg = <0 0x1100b000 0 0x1000>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
-		clock-names = "therm", "auxadc";
-		resets = <&pericfg MT2701_PERI_THERM_SW_RST>;
-		reset-names = "therm";
-		mediatek,auxadc = <&auxadc>;
-		mediatek,apmixedsys = <&apmixedsys>;
-		nvmem-cells = <&thermal_calibration_data>;
-		nvmem-cell-names = "calibration-data";
-	};
-
-	btif: serial@1100c000 {
-		compatible = "mediatek,mt7623-btif",
-			     "mediatek,mtk-btif";
-		reg = <0 0x1100c000 0 0x1000>;
-		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_BTIF>;
-		clock-names = "main";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
-
-	nandc: nfi@1100d000 {
-		compatible = "mediatek,mt7623-nfc",
-			     "mediatek,mt2701-nfc";
-		reg = <0 0x1100d000 0 0x1000>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-		clocks = <&pericfg CLK_PERI_NFI>,
-			 <&pericfg CLK_PERI_NFI_PAD>;
-		clock-names = "nfi_clk", "pad_clk";
-		status = "disabled";
-		ecc-engine = <&bch>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	bch: ecc@1100e000 {
-		compatible = "mediatek,mt7623-ecc",
-			     "mediatek,mt2701-ecc";
-		reg = <0 0x1100e000 0 0x1000>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_NFI_ECC>;
-		clock-names = "nfiecc_clk";
-		status = "disabled";
-	};
-
-	nor_flash: spi@11014000 {
-		compatible = "mediatek,mt7623-nor",
-			     "mediatek,mt8173-nor";
-		reg = <0 0x11014000 0 0x1000>;
-		clocks = <&pericfg CLK_PERI_FLASH>,
-			 <&topckgen CLK_TOP_FLASH_SEL>;
-		clock-names = "spi", "sf";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi1: spi@11016000 {
-		compatible = "mediatek,mt7623-spi",
-			     "mediatek,mt2701-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x11016000 0 0x100>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-			 <&topckgen CLK_TOP_SPI1_SEL>,
-			 <&pericfg CLK_PERI_SPI1>;
-		clock-names = "parent-clk", "sel-clk", "spi-clk";
-		status = "disabled";
-	};
-
-	spi2: spi@11017000 {
-		compatible = "mediatek,mt7623-spi",
-			     "mediatek,mt2701-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x11017000 0 0x1000>;
-		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-			 <&topckgen CLK_TOP_SPI2_SEL>,
-			 <&pericfg CLK_PERI_SPI2>;
-		clock-names = "parent-clk", "sel-clk", "spi-clk";
-		status = "disabled";
-	};
-
-	usb0: usb@11200000 {
-		compatible = "mediatek,mt7623-musb",
-			     "mediatek,mtk-musb";
-		reg = <0 0x11200000 0 0x1000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "mc";
-		phys = <&u2port2 PHY_TYPE_USB2>;
-		dr_mode = "otg";
-		clocks = <&pericfg CLK_PERI_USB0>,
-			 <&pericfg CLK_PERI_USB0_MCU>,
-			 <&pericfg CLK_PERI_USB_SLV>;
-		clock-names = "main","mcu","univpll";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-		status = "disabled";
-	};
-
-	u2phy1: t-phy@11210000 {
-		compatible = "mediatek,mt7623-tphy",
-			     "mediatek,generic-tphy-v1";
-		reg = <0 0x11210000 0 0x0800>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		status = "disabled";
-
-		u2port2: usb-phy@11210800 {
-			reg = <0 0x11210800 0 0x0100>;
-			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
-			clock-names = "ref";
-			#phy-cells = <1>;
-		};
-	};
-
-	audsys: clock-controller@11220000 {
-		compatible = "mediatek,mt7623-audsys",
-			     "mediatek,mt2701-audsys",
-			     "syscon";
-		reg = <0 0x11220000 0 0x2000>;
-		#clock-cells = <1>;
-
-		afe: audio-controller {
-			compatible = "mediatek,mt7623-audio",
-				     "mediatek,mt2701-audio";
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
-				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-names = "afe", "asys";
-			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-
-			clocks = <&infracfg CLK_INFRA_AUDIO>,
-				 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-				 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-				 <&topckgen CLK_TOP_AUD_48K_TIMING>,
-				 <&topckgen CLK_TOP_AUD_44K_TIMING>,
-				 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
-				 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
-				 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
-				 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
-				 <&audsys CLK_AUD_I2SO1>,
-				 <&audsys CLK_AUD_I2SO2>,
-				 <&audsys CLK_AUD_I2SO3>,
-				 <&audsys CLK_AUD_I2SO4>,
-				 <&audsys CLK_AUD_I2SIN1>,
-				 <&audsys CLK_AUD_I2SIN2>,
-				 <&audsys CLK_AUD_I2SIN3>,
-				 <&audsys CLK_AUD_I2SIN4>,
-				 <&audsys CLK_AUD_ASRCO1>,
-				 <&audsys CLK_AUD_ASRCO2>,
-				 <&audsys CLK_AUD_ASRCO3>,
-				 <&audsys CLK_AUD_ASRCO4>,
-				 <&audsys CLK_AUD_AFE>,
-				 <&audsys CLK_AUD_AFE_CONN>,
-				 <&audsys CLK_AUD_A1SYS>,
-				 <&audsys CLK_AUD_A2SYS>,
-				 <&audsys CLK_AUD_AFE_MRGIF>;
-
-			clock-names = "infra_sys_audio_clk",
-				      "top_audio_mux1_sel",
-				      "top_audio_mux2_sel",
-				      "top_audio_a1sys_hp",
-				      "top_audio_a2sys_hp",
-				      "i2s0_src_sel",
-				      "i2s1_src_sel",
-				      "i2s2_src_sel",
-				      "i2s3_src_sel",
-				      "i2s0_src_div",
-				      "i2s1_src_div",
-				      "i2s2_src_div",
-				      "i2s3_src_div",
-				      "i2s0_mclk_en",
-				      "i2s1_mclk_en",
-				      "i2s2_mclk_en",
-				      "i2s3_mclk_en",
-				      "i2so0_hop_ck",
-				      "i2so1_hop_ck",
-				      "i2so2_hop_ck",
-				      "i2so3_hop_ck",
-				      "i2si0_hop_ck",
-				      "i2si1_hop_ck",
-				      "i2si2_hop_ck",
-				      "i2si3_hop_ck",
-				      "asrc0_out_ck",
-				      "asrc1_out_ck",
-				      "asrc2_out_ck",
-				      "asrc3_out_ck",
-				      "audio_afe_pd",
-				      "audio_afe_conn_pd",
-				      "audio_a1sys_pd",
-				      "audio_a2sys_pd",
-				      "audio_mrgif_pd";
-
-			assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-					  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-					  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
-					  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
-			assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
-						 <&topckgen CLK_TOP_AUD2PLL_90M>;
-			assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
-		};
-	};
-
-	mmc0: mmc@11230000 {
-		compatible = "mediatek,mt7623-mmc",
-			     "mediatek,mt2701-mmc";
-		reg = <0 0x11230000 0 0x1000>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_MSDC30_0>,
-			 <&topckgen CLK_TOP_MSDC30_0_SEL>;
-		clock-names = "source", "hclk";
-		status = "disabled";
-	};
-
-	mmc1: mmc@11240000 {
-		compatible = "mediatek,mt7623-mmc",
-			     "mediatek,mt2701-mmc";
-		reg = <0 0x11240000 0 0x1000>;
-		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_MSDC30_1>,
-			 <&topckgen CLK_TOP_MSDC30_1_SEL>;
-		clock-names = "source", "hclk";
-		status = "disabled";
-	};
-
-	vdecsys: syscon@16000000 {
-		compatible = "mediatek,mt7623-vdecsys",
-			     "mediatek,mt2701-vdecsys",
-			     "syscon";
-		reg = <0 0x16000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	hifsys: syscon@1a000000 {
-		compatible = "mediatek,mt7623-hifsys",
-			     "mediatek,mt2701-hifsys",
-			     "syscon";
-		reg = <0 0x1a000000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	pcie: pcie@1a140000 {
-		compatible = "mediatek,mt7623-pcie";
-		device_type = "pci";
-		reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
-		      <0 0x1a142000 0 0x1000>, /* Port0 registers */
-		      <0 0x1a143000 0 0x1000>, /* Port1 registers */
-		      <0 0x1a144000 0 0x1000>; /* Port2 registers */
-		reg-names = "subsys", "port0", "port1", "port2";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xf800 0 0 0>;
-		interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
-				<0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
-				<0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
-			 <&hifsys CLK_HIFSYS_PCIE0>,
-			 <&hifsys CLK_HIFSYS_PCIE1>,
-			 <&hifsys CLK_HIFSYS_PCIE2>;
-		clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
-		resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
-			 <&hifsys MT2701_HIFSYS_PCIE1_RST>,
-			 <&hifsys MT2701_HIFSYS_PCIE2_RST>;
-		reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
-		phys = <&pcie0_port PHY_TYPE_PCIE>,
-		       <&pcie1_port PHY_TYPE_PCIE>,
-		       <&u3port1 PHY_TYPE_PCIE>;
-		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
-		bus-range = <0x00 0xff>;
-		status = "disabled";
-		ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000
-			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;
-
-		pcie@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
-			ranges;
-			status = "disabled";
-		};
-
-		pcie@1,0 {
-			reg = <0x0800 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
-			ranges;
-			status = "disabled";
-		};
-
-		pcie@2,0 {
-			reg = <0x1000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
-			ranges;
-			status = "disabled";
-		};
-	};
-
-	pcie0_phy: t-phy@1a149000 {
-		compatible = "mediatek,mt7623-tphy",
-			     "mediatek,generic-tphy-v1";
-		reg = <0 0x1a149000 0 0x0700>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		status = "disabled";
-
-		pcie0_port: pcie-phy@1a149900 {
-			reg = <0 0x1a149900 0 0x0700>;
-			clocks = <&clk26m>;
-			clock-names = "ref";
-			#phy-cells = <1>;
-			status = "okay";
-		};
-	};
-
-	pcie1_phy: t-phy@1a14a000 {
-		compatible = "mediatek,mt7623-tphy",
-			     "mediatek,generic-tphy-v1";
-		reg = <0 0x1a14a000 0 0x0700>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		status = "disabled";
-
-		pcie1_port: pcie-phy@1a14a900 {
-			reg = <0 0x1a14a900 0 0x0700>;
-			clocks = <&clk26m>;
-			clock-names = "ref";
-			#phy-cells = <1>;
-			status = "okay";
-		};
-	};
-
-	usb1: usb@1a1c0000 {
-		compatible = "mediatek,mt7623-xhci",
-			     "mediatek,mtk-xhci";
-		reg = <0 0x1a1c0000 0 0x1000>,
-		      <0 0x1a1c4700 0 0x0100>;
-		reg-names = "mac", "ippc";
-		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
-			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "sys_ck", "ref_ck";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
-		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
-		status = "disabled";
-	};
-
-	u3phy1: t-phy@1a1c4000 {
-		compatible = "mediatek,mt7623-tphy",
-			     "mediatek,generic-tphy-v1";
-		reg = <0 0x1a1c4000 0 0x0700>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		status = "disabled";
-
-		u2port0: usb-phy@1a1c4800 {
-			reg = <0 0x1a1c4800 0 0x0100>;
-			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
-			clock-names = "ref";
-			#phy-cells = <1>;
-			status = "okay";
-		};
-
-		u3port0: usb-phy@1a1c4900 {
-			reg = <0 0x1a1c4900 0 0x0700>;
-			clocks = <&clk26m>;
-			clock-names = "ref";
-			#phy-cells = <1>;
-			status = "okay";
-		};
-	};
-
-	usb2: usb@1a240000 {
-		compatible = "mediatek,mt7623-xhci",
-			     "mediatek,mtk-xhci";
-		reg = <0 0x1a240000 0 0x1000>,
-		      <0 0x1a244700 0 0x0100>;
-		reg-names = "mac", "ippc";
-		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
-			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "sys_ck", "ref_ck";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
-		phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
-		status = "disabled";
-	};
-
-	u3phy2: t-phy@1a244000 {
-		compatible = "mediatek,mt7623-tphy",
-			     "mediatek,generic-tphy-v1";
-		reg = <0 0x1a244000 0 0x0700>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		status = "disabled";
-
-		u2port1: usb-phy@1a244800 {
-			reg = <0 0x1a244800 0 0x0100>;
-			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
-			clock-names = "ref";
-			#phy-cells = <1>;
-			status = "okay";
-		};
-
-		u3port1: usb-phy@1a244900 {
-			reg = <0 0x1a244900 0 0x0700>;
-			clocks = <&clk26m>;
-			clock-names = "ref";
-			#phy-cells = <1>;
-			status = "okay";
-		};
-	};
-
-	ethsys: syscon@1b000000 {
-		compatible = "mediatek,mt7623-ethsys",
-			     "mediatek,mt2701-ethsys",
-			     "syscon";
-		reg = <0 0x1b000000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	hsdma: dma-controller@1b007000 {
-		compatible = "mediatek,mt7623-hsdma";
-		reg = <0 0x1b007000 0 0x1000>;
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&ethsys CLK_ETHSYS_HSDMA>;
-		clock-names = "hsdma";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-		#dma-cells = <1>;
-	};
-
-	eth: ethernet@1b100000 {
-		compatible = "mediatek,mt7623-eth",
-			     "mediatek,mt2701-eth",
-			     "syscon";
-		reg = <0 0x1b100000 0 0x20000>;
-		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
-			 <&ethsys CLK_ETHSYS_ESW>,
-			 <&ethsys CLK_ETHSYS_GP1>,
-			 <&ethsys CLK_ETHSYS_GP2>,
-			 <&apmixedsys CLK_APMIXED_TRGPLL>;
-		clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
-		resets = <&ethsys MT2701_ETHSYS_FE_RST>,
-			 <&ethsys MT2701_ETHSYS_GMAC_RST>,
-			 <&ethsys MT2701_ETHSYS_PPE_RST>;
-		reset-names = "fe", "gmac", "ppe";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-		mediatek,ethsys = <&ethsys>;
-		mediatek,pctl = <&syscfg_pctl_a>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	crypto: crypto@1b240000 {
-		compatible = "mediatek,eip97-crypto";
-		reg = <0 0x1b240000 0 0x20000>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&ethsys CLK_ETHSYS_CRYPTO>;
-		clock-names = "cryp";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-		status = "disabled";
-	};
-
-	bdpsys: syscon@1c000000 {
-		compatible = "mediatek,mt7623-bdpsys",
-			     "mediatek,mt2701-bdpsys",
-			     "syscon";
-		reg = <0 0x1c000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-};
-
-&pio {
-	cir_pins_a:cir-default {
-		pins-cir {
-			pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
-			bias-disable;
-		};
-	};
-
-	i2c0_pins_a: i2c0-default {
-		pins-i2c0 {
-			pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
-				 <MT7623_PIN_76_SCL0_FUNC_SCL0>;
-			bias-disable;
-		};
-	};
-
-	i2c1_pins_a: i2c1-default {
-		pin-i2c1 {
-			pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
-				 <MT7623_PIN_58_SCL1_FUNC_SCL1>;
-			bias-disable;
-		};
-	};
-
-	i2c1_pins_b: i2c1-alt {
-		pin-i2c1 {
-			pinmux = <MT7623_PIN_242_URTS2_FUNC_SCL1>,
-				 <MT7623_PIN_243_UCTS2_FUNC_SDA1>;
-			bias-disable;
-		};
-	};
-
-	i2c2_pins_a: i2c2-default {
-		pin-i2c2 {
-			pinmux = <MT7623_PIN_77_SDA2_FUNC_SDA2>,
-				 <MT7623_PIN_78_SCL2_FUNC_SCL2>;
-			bias-disable;
-		};
-	};
-
-	i2c2_pins_b: i2c2-alt {
-		pin-i2c2 {
-			pinmux = <MT7623_PIN_122_GPIO122_FUNC_SDA2>,
-				 <MT7623_PIN_123_HTPLG_FUNC_SCL2>;
-			bias-disable;
-		};
-	};
-
-	i2s0_pins_a: i2s0-default {
-		pin-i2s0 {
-			pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
-				 <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
-				 <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
-				 <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
-				 <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
-			drive-strength = <MTK_DRIVE_12mA>;
-			bias-pull-down;
-		};
-	};
-
-	i2s1_pins_a: i2s1-default {
-		pin-i2s1 {
-			pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
-				 <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
-				 <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
-				 <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
-				 <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
-			drive-strength = <MTK_DRIVE_12mA>;
-			bias-pull-down;
-		};
-	};
-
-	key_pins_a: keys-alt {
-		pins-keys {
-			pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
-				 <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
-			input-enable;
-		};
-	};
-
-	led_pins_a: leds-alt {
-		pins-leds {
-			pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
-				 <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
-				 <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
-		};
-	};
-
-	mmc0_pins_default: mmc0default {
-		pins-cmd-dat {
-			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
-				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
-				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
-				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
-				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
-				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
-				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
-				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
-				 <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
-			input-enable;
-			bias-pull-up;
-		};
-
-		pins-clk {
-			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
-			bias-pull-down;
-		};
-
-		pins-rst {
-			pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
-			bias-pull-up;
-		};
-	};
-
-	mmc0_pins_uhs: mmc0 {
-		pins-cmd-dat {
-			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
-				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
-				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
-				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
-				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
-				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
-				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
-				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
-				 <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
-			input-enable;
-			drive-strength = <MTK_DRIVE_2mA>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-
-		pins-clk {
-			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_2mA>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
-		};
-
-		pins-rst {
-			pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
-			bias-pull-up;
-		};
-	};
-
-	mmc1_pins_default: mmc1default {
-		pins-cmd-dat {
-			pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
-				 <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
-				 <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
-				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
-				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
-			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-clk {
-			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
-			bias-pull-down;
-			drive-strength = <MTK_DRIVE_4mA>;
-		};
-
-		pins-wp {
-			pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
-			input-enable;
-			bias-pull-up;
-		};
-
-		pins-insert {
-			pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
-			bias-pull-up;
-		};
-	};
-
-	mmc1_pins_uhs: mmc1 {
-		pins-cmd-dat {
-			pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
-				 <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
-				 <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
-				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
-				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
-			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-clk {
-			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_4mA>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-	};
-
-	nand_pins_default: nanddefault {
-		pins-ale {
-			pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
-			drive-strength = <MTK_DRIVE_8mA>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-dat {
-			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
-				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
-				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
-				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
-				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
-				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
-				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
-				 <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
-				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
-			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
-			bias-pull-up;
-		};
-
-		pins-we {
-			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
-			drive-strength = <MTK_DRIVE_8mA>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
-		};
-	};
-
-	pcie_default: pcie_pin_default {
-		pins_cmd_dat {
-			pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
-				 <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
-			bias-disable;
-		};
-	};
-
-	pwm_pins_a: pwm-default {
-		pins-pwm {
-			pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
-				 <MT7623_PIN_204_PWM1_FUNC_PWM1>,
-				 <MT7623_PIN_205_PWM2_FUNC_PWM2>,
-				 <MT7623_PIN_206_PWM3_FUNC_PWM3>,
-				 <MT7623_PIN_207_PWM4_FUNC_PWM4>;
-		};
-	};
-
-	spi0_pins_a: spi0-default {
-		pins-spi {
-			pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
-				<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
-				<MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
-				<MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
-			bias-disable;
-		};
-	};
-
-	spi1_pins_a: spi1-default {
-		pins-spi {
-			pinmux = <MT7623_PIN_7_SPI1_CSN_FUNC_SPI1_CS>,
-				<MT7623_PIN_199_SPI1_CK_FUNC_SPI1_CK>,
-				<MT7623_PIN_8_SPI1_MI_FUNC_SPI1_MI>,
-				<MT7623_PIN_9_SPI1_MO_FUNC_SPI1_MO>;
-		};
-	};
-
-	spi2_pins_a: spi2-default {
-		pins-spi {
-			pinmux = <MT7623_PIN_101_SPI2_CSN_FUNC_SPI2_CS>,
-				 <MT7623_PIN_104_SPI2_CK_FUNC_SPI2_CK>,
-				 <MT7623_PIN_102_SPI2_MI_FUNC_SPI2_MI>,
-				 <MT7623_PIN_103_SPI2_MO_FUNC_SPI2_MO>;
-		};
-	};
-
-	uart0_pins_a: uart0-default {
-		pins-dat {
-			pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
-				 <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
-		};
-	};
-
-	uart1_pins_a: uart1-default {
-		pins-dat {
-			pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
-				 <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
-		};
-	};
-
-	uart2_pins_a: uart2-default {
-		pins-dat {
-			pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,
-				 <MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
-		};
-	};
-
-	uart2_pins_b: uart2-alt {
-		pins-dat {
-			pinmux = <MT7623_PIN_200_URXD2_FUNC_URXD2>,
-				 <MT7623_PIN_201_UTXD2_FUNC_UTXD2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
deleted file mode 100644
index e8b4b6d30d197..0000000000000
--- a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
+++ /dev/null
@@ -1,291 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2017-2018 MediaTek Inc.
- * Author: Sean Wang <sean.wang@mediatek.com>
- *
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "mt7623a.dtsi"
-#include "mt6323.dtsi"
-
-/ {
-	model = "MediaTek MT7623A with eMMC reference board";
-	compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623";
-
-	aliases {
-		serial2 = &uart2;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	cpus {
-		cpu@0 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu@1 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu@2 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu@3 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&key_pins_a>;
-
-		button-factory {
-			label = "factory";
-			linux,code = <BTN_0>;
-			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x20000000>;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "mediatek,mt2701-wm8960-machine";
-		mediatek,platform = <&afe>;
-		audio-routing =
-			"Headphone", "HP_L",
-			"Headphone", "HP_R",
-			"LINPUT1", "AMIC",
-			"RINPUT1", "AMIC";
-		mediatek,audio-codec = <&wm8960>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_pins_a>;
-	};
-};
-
-&btif {
-	status = "okay";
-};
-
-&crypto {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "trgmii";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@0 {
-			compatible = "mediatek,mt7530";
-			reg = <0>;
-			mediatek,mcm;
-			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
-			reset-names = "mcm";
-			core-supply = <&mt6323_vpa_reg>;
-			io-supply = <&mt6323_vemc3v3_reg>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "wan";
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "trgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_b>;
-	status = "okay";
-
-	wm8960: wm8960@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_b>;
-	status = "okay";
-};
-
-&mmc0 {
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc0_pins_default>;
-	pinctrl-1 = <&mmc0_pins_uhs>;
-	status = "okay";
-	bus-width = <8>;
-	max-frequency = <50000000>;
-	cap-mmc-highspeed;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_1p8v>;
-	non-removable;
-};
-
-&mmc1 {
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_uhs>;
-	status = "okay";
-	bus-width = <4>;
-	max-frequency = <50000000>;
-	cap-sd-highspeed;
-	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_default>;
-	status = "okay";
-
-	pcie@0,0 {
-		status = "okay";
-	};
-
-	pcie@1,0 {
-		status = "okay";
-	};
-};
-
-&pcie0_phy {
-	status = "okay";
-};
-
-&pcie1_phy {
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm_pins_a>;
-	status = "okay";
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>;
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins_a>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins_b>;
-	status = "okay";
-};
-
-&usb1 {
-	vusb33-supply = <&reg_3p3v>;
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&u3phy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
deleted file mode 100644
index 61f5da68d4b0c..0000000000000
--- a/arch/arm/boot/dts/mt7623a-rfb-nand.dts
+++ /dev/null
@@ -1,337 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2017-2018 MediaTek Inc.
- * Author: Sean Wang <sean.wang@mediatek.com>
- *
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "mt7623a.dtsi"
-#include "mt6323.dtsi"
-
-/ {
-	model = "MediaTek MT7623A with NAND reference board";
-	compatible = "mediatek,mt7623a-rfb-nand", "mediatek,mt7623";
-
-	aliases {
-		serial2 = &uart2;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	cpus {
-		cpu@0 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu@1 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu@2 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu@3 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&key_pins_a>;
-
-		button-factory {
-			label = "factory";
-			linux,code = <BTN_0>;
-			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x20000000>;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "mediatek,mt2701-wm8960-machine";
-		mediatek,platform = <&afe>;
-		audio-routing =
-			"Headphone", "HP_L",
-			"Headphone", "HP_R",
-			"LINPUT1", "AMIC",
-			"RINPUT1", "AMIC";
-		mediatek,audio-codec = <&wm8960>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_pins_a>;
-	};
-};
-
-&bch {
-	status = "okay";
-};
-
-&btif {
-	status = "okay";
-};
-
-&crypto {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "trgmii";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@0 {
-			compatible = "mediatek,mt7530";
-			reg = <0>;
-			mediatek,mcm;
-			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
-			reset-names = "mcm";
-			core-supply = <&mt6323_vpa_reg>;
-			io-supply = <&mt6323_vemc3v3_reg>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "wan";
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "trgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_b>;
-	status = "okay";
-
-	wm8960: wm8960@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_b>;
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_uhs>;
-	status = "okay";
-	bus-width = <4>;
-	max-frequency = <50000000>;
-	cap-sd-highspeed;
-	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
-};
-
-&nandc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_pins_default>;
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		spare_per_sector = <64>;
-		nand-ecc-mode = "hw";
-		nand-ecc-strength = <12>;
-		nand-ecc-step-size = <1024>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "preloader";
-				reg = <0x0 0x40000>;
-			};
-
-			partition@40000 {
-				label = "uboot";
-				reg = <0x40000 0x80000>;
-			};
-
-			partition@c0000 {
-				label = "uboot-env";
-				reg = <0xC0000 0x40000>;
-			};
-
-			partition@140000 {
-				label = "bootimg";
-				reg = <0x140000 0x2000000>;
-			};
-
-			partition@2140000 {
-				label = "recovery";
-				reg = <0x2140000 0x2000000>;
-			};
-
-			partition@4140000 {
-				label = "rootfs";
-				reg = <0x4140000 0x1000000>;
-			};
-
-			partition@5140000 {
-				label = "usrdata";
-				reg = <0x5140000 0x1000000>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_default>;
-	status = "okay";
-
-	pcie@0,0 {
-		status = "okay";
-	};
-
-	pcie@1,0 {
-		status = "okay";
-	};
-};
-
-&pcie0_phy {
-	status = "okay";
-};
-
-&pcie1_phy {
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm_pins_a>;
-	status = "okay";
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>;
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins_a>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins_b>;
-	status = "okay";
-};
-
-&usb1 {
-	vusb33-supply = <&reg_3p3v>;
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&u3phy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
deleted file mode 100644
index d304b62d24b58..0000000000000
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2017-2018 MediaTek Inc.
- * Author: Sean Wang <sean.wang@mediatek.com>
- *
- */
-
-/dts-v1/;
-#include <dt-bindings/power/mt7623a-power.h>
-#include "mt7623.dtsi"
-
-&afe {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
-};
-
-&crypto {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
-};
-
-&eth {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
-};
-
-&nandc {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
-};
-
-&pcie {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
-};
-
-&scpsys {
-	compatible = "mediatek,mt7623a-scpsys";
-	clocks = <&topckgen CLK_TOP_ETHIF_SEL>;
-	clock-names = "ethif";
-};
-
-&usb0 {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
-};
-
-&usb1 {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
-};
-
-&usb2 {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
-};
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
deleted file mode 100644
index ece61a6a7a897..0000000000000
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ /dev/null
@@ -1,448 +0,0 @@
-/*
- * Copyright 2017-2018 Sean Wang <sean.wang@mediatek.com>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "mt7623n.dtsi"
-#include "mt6323.dtsi"
-
-/ {
-	model = "Bananapi BPI-R2";
-	compatible = "bananapi,bpi-r2", "mediatek,mt7623";
-
-	aliases {
-		serial2 = &uart2;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-		type = "d";
-		ddc-i2c-bus = <&hdmiddc0>;
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi0_out>;
-			};
-		};
-	};
-
-	cpus {
-		cpu@0 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu@1 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu@2 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu@3 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_vgpu: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_fixed_vgpu";
-		regulator-min-microvolt = <1150000>;
-		regulator-max-microvolt = <1150000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&key_pins_a>;
-
-		button-factory {
-			label = "factory";
-			linux,code = <BTN_0>;
-			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_a>;
-
-		blue {
-			label = "bpi-r2:pio:blue";
-			gpios = <&pio 240 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		green {
-			label = "bpi-r2:pio:green";
-			gpios = <&pio 241 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		red {
-			label = "bpi-r2:pio:red";
-			gpios = <&pio 239 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x80000000>;
-	};
-};
-
-&bls {
-	status = "okay";
-};
-
-&btif {
-	status = "okay";
-};
-
-&cec {
-	status = "okay";
-};
-
-&cir {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cir_pins_a>;
-	status = "okay";
-};
-
-&crypto {
-	status = "okay";
-};
-
-&dpi0 {
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			dpi0_out: endpoint {
-				remote-endpoint = <&hdmi0_in>;
-			};
-		};
-	};
-};
-
-&eth {
-	status = "okay";
-
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "trgmii";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	mdio: mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@0 {
-			compatible = "mediatek,mt7530";
-			reg = <0>;
-			reset-gpios = <&pio 33 0>;
-			core-supply = <&mt6323_vpa_reg>;
-			io-supply = <&mt6323_vemc3v3_reg>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "wan";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan0";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan1";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan2";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "lan3";
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "trgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-						pause;
-					};
-				};
-			};
-		};
-	};
-};
-
-&hdmi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_pins_a>;
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			hdmi0_in: endpoint {
-				remote-endpoint = <&dpi0_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			hdmi0_out: endpoint {
-				remote-endpoint = <&hdmi_connector_in>;
-			};
-		};
-	};
-};
-
-&hdmiddc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_ddc_pins_a>;
-	status = "okay";
-};
-
-&hdmi_phy {
-	mediatek,ibias = <0xa>;
-	mediatek,ibias_up = <0x1c>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-};
-
-&mali {
-	mali-supply = <&reg_vgpu>;
-	status = "okay";
-};
-
-&mmc0 {
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc0_pins_default>;
-	pinctrl-1 = <&mmc0_pins_uhs>;
-	status = "okay";
-	bus-width = <8>;
-	max-frequency = <50000000>;
-	cap-mmc-highspeed;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_1p8v>;
-	non-removable;
-};
-
-&mmc1 {
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_uhs>;
-	status = "okay";
-	bus-width = <4>;
-	max-frequency = <50000000>;
-	cap-sd-highspeed;
-	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
-};
-
-&mt6323keys {
-	home {
-		status = "disabled";
-	};
-};
-
-&mt6323_leds {
-	status = "okay";
-
-	led@0 {
-		reg = <0>;
-		label = "bpi-r2:isink:green";
-		default-state = "off";
-	};
-
-	led@1 {
-		reg = <1>;
-		label = "bpi-r2:isink:red";
-		default-state = "off";
-	};
-
-	led@2 {
-		reg = <2>;
-		label = "bpi-r2:isink:blue";
-		default-state = "off";
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_default>;
-	status = "okay";
-
-	pcie@0,0 {
-		status = "okay";
-	};
-
-	pcie@1,0 {
-		status = "okay";
-	};
-};
-
-&pcie0_phy {
-	status = "okay";
-};
-
-&pcie1_phy {
-	status = "okay";
-};
-
-&pio {
-	musb_pins: musb {
-		pins-musb {
-			pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>;
-		};
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm_pins_a>;
-	status = "okay";
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_a>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins_a>;
-	status = "okay";
-};
-
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&musb_pins>;
-	status = "okay";
-	usb-role-switch;
-
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&usb1 {
-	vusb33-supply = <&reg_3p3v>;
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&usb2 {
-	vusb33-supply = <&reg_3p3v>;
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&u2phy1 {
-	status = "okay";
-};
-
-&u3phy1 {
-	status = "okay";
-};
-
-&u3phy2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
deleted file mode 100644
index bf67a8e9be59c..0000000000000
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ /dev/null
@@ -1,399 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2017-2018 MediaTek Inc.
- * Author: Sean Wang <sean.wang@mediatek.com>
- *
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "mt7623n.dtsi"
-#include "mt6323.dtsi"
-
-/ {
-	model = "MediaTek MT7623N with eMMC reference board";
-	compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-		type = "d";
-		ddc-i2c-bus = <&hdmiddc0>;
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi0_out>;
-			};
-		};
-	};
-
-	cpus {
-		cpu@0 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu@1 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu@2 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu@3 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&key_pins_a>;
-
-		button-factory {
-			label = "factory";
-			linux,code = <BTN_0>;
-			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "mediatek,mt2701-wm8960-machine";
-		mediatek,platform = <&afe>;
-		audio-routing =
-			"Headphone", "HP_L",
-			"Headphone", "HP_R",
-			"LINPUT1", "AMIC",
-			"RINPUT1", "AMIC";
-		mediatek,audio-codec = <&wm8960>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_pins_a>;
-	};
-};
-
-&bls {
-	status = "okay";
-};
-
-&btif {
-	status = "okay";
-};
-
-&cec {
-	status = "okay";
-};
-
-&cir {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cir_pins_a>;
-	status = "okay";
-};
-
-&crypto {
-	status = "okay";
-};
-
-&dpi0 {
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			dpi0_out: endpoint {
-				remote-endpoint = <&hdmi0_in>;
-			};
-		};
-	};
-};
-
-&eth {
-	status = "okay";
-
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "trgmii";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-mode = "rgmii";
-		phy-handle = <&phy5>;
-	};
-
-	mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy5: ethernet-phy@5 {
-			reg = <5>;
-			phy-mode = "rgmii-rxid";
-		};
-
-		switch@0 {
-			compatible = "mediatek,mt7530";
-			reg = <0>;
-			reset-gpios = <&pio 33 0>;
-			core-supply = <&mt6323_vpa_reg>;
-			io-supply = <&mt6323_vemc3v3_reg>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "wan";
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "trgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
-};
-
-&hdmi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_pins_a>;
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			hdmi0_in: endpoint {
-				remote-endpoint = <&dpi0_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			hdmi0_out: endpoint {
-				remote-endpoint = <&hdmi_connector_in>;
-			};
-		};
-	};
-};
-
-&hdmiddc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_ddc_pins_a>;
-	status = "okay";
-};
-
-&hdmi_phy {
-	mediatek,ibias = <0xa>;
-	mediatek,ibias_up = <0x1c>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_b>;
-	status = "okay";
-
-	wm8960: wm8960@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
-	status = "okay";
-};
-
-&mmc0 {
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc0_pins_default>;
-	pinctrl-1 = <&mmc0_pins_uhs>;
-	status = "okay";
-	bus-width = <8>;
-	max-frequency = <50000000>;
-	cap-mmc-highspeed;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_1p8v>;
-	non-removable;
-};
-
-&mmc1 {
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_uhs>;
-	status = "okay";
-	bus-width = <4>;
-	max-frequency = <50000000>;
-	cap-sd-highspeed;
-	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_default>;
-	status = "okay";
-
-	pcie@0,0 {
-		status = "okay";
-	};
-
-	pcie@1,0 {
-		status = "okay";
-	};
-};
-
-&pcie0_phy {
-	status = "okay";
-};
-
-&pcie1_phy {
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm_pins_a>;
-	status = "okay";
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>;
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins_a>;
-	status = "okay";
-};
-
-&spi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_a>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins_a>;
-	status = "okay";
-};
-
-&usb1 {
-	vusb33-supply = <&reg_3p3v>;
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&u3phy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
deleted file mode 100644
index 3adab5cd1fef7..0000000000000
--- a/arch/arm/boot/dts/mt7623n.dtsi
+++ /dev/null
@@ -1,301 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright © 2017-2020 MediaTek Inc.
- * Author: Sean Wang <sean.wang@mediatek.com>
- *	   Ryder Lee <ryder.lee@mediatek.com>
- *
- */
-
-#include "mt7623.dtsi"
-#include <dt-bindings/memory/mt2701-larb-port.h>
-
-/ {
-	aliases {
-		rdma0 = &rdma0;
-		rdma1 = &rdma1;
-	};
-
-	g3dsys: syscon@13000000 {
-		compatible = "mediatek,mt7623-g3dsys",
-			     "mediatek,mt2701-g3dsys",
-			     "syscon";
-		reg = <0 0x13000000 0 0x200>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	mali: gpu@13040000 {
-		compatible = "mediatek,mt7623-mali", "arm,mali-450";
-		reg = <0 0x13040000 0 0x30000>;
-		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1",
-				  "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3",
-				  "pp";
-		clocks = <&topckgen CLK_TOP_MMPLL>,
-			 <&g3dsys CLK_G3DSYS_CORE>;
-		clock-names = "bus", "core";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
-		resets = <&g3dsys MT2701_G3DSYS_CORE_RST>;
-	};
-
-	mmsys: syscon@14000000 {
-		compatible = "mediatek,mt7623-mmsys",
-			     "mediatek,mt2701-mmsys",
-			     "syscon";
-		reg = <0 0x14000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	larb0: larb@14010000 {
-		compatible = "mediatek,mt7623-smi-larb",
-			     "mediatek,mt2701-smi-larb";
-		reg = <0 0x14010000 0 0x1000>;
-		mediatek,smi = <&smi_common>;
-		mediatek,larb-id = <0>;
-		clocks = <&mmsys CLK_MM_SMI_LARB0>,
-			 <&mmsys CLK_MM_SMI_LARB0>;
-		clock-names = "apb", "smi";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
-	};
-
-	larb1: larb@16010000 {
-		compatible = "mediatek,mt7623-smi-larb",
-			     "mediatek,mt2701-smi-larb";
-		reg = <0 0x16010000 0 0x1000>;
-		mediatek,smi = <&smi_common>;
-		mediatek,larb-id = <1>;
-		clocks = <&vdecsys CLK_VDEC_CKGEN>,
-			 <&vdecsys CLK_VDEC_LARB>;
-		clock-names = "apb", "smi";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
-	};
-
-	larb2: larb@15001000 {
-		compatible = "mediatek,mt7623-smi-larb",
-			     "mediatek,mt2701-smi-larb";
-		reg = <0 0x15001000 0 0x1000>;
-		mediatek,smi = <&smi_common>;
-		mediatek,larb-id = <2>;
-		clocks = <&imgsys CLK_IMG_SMI_COMM>,
-			 <&imgsys CLK_IMG_SMI_COMM>;
-		clock-names = "apb", "smi";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-	};
-
-	imgsys: syscon@15000000 {
-		compatible = "mediatek,mt7623-imgsys",
-			     "mediatek,mt2701-imgsys",
-			     "syscon";
-		reg = <0 0x15000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	iommu: mmsys_iommu@10205000 {
-		compatible = "mediatek,mt7623-m4u",
-			     "mediatek,mt2701-m4u";
-		reg = <0 0x10205000 0 0x1000>;
-		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_M4U>;
-		clock-names = "bclk";
-		mediatek,larbs = <&larb0 &larb1 &larb2>;
-		#iommu-cells = <1>;
-	};
-
-	jpegdec: jpegdec@15004000 {
-		compatible = "mediatek,mt7623-jpgdec",
-			     "mediatek,mt2701-jpgdec";
-		reg = <0 0x15004000 0 0x1000>;
-		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
-			  <&imgsys CLK_IMG_JPGDEC>;
-		clock-names = "jpgdec-smi",
-			      "jpgdec";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
-			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
-	};
-
-	smi_common: smi@1000c000 {
-		compatible = "mediatek,mt7623-smi-common",
-			     "mediatek,mt2701-smi-common";
-		reg = <0 0x1000c000 0 0x1000>;
-		clocks = <&infracfg CLK_INFRA_SMI>,
-			 <&mmsys CLK_MM_SMI_COMMON>,
-			 <&infracfg CLK_INFRA_SMI>;
-		clock-names = "apb", "smi", "async";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
-	};
-
-	ovl: ovl@14007000 {
-		compatible = "mediatek,mt7623-disp-ovl",
-			     "mediatek,mt2701-disp-ovl";
-		reg = <0 0x14007000 0 0x1000>;
-		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&mmsys CLK_MM_DISP_OVL>;
-		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
-	};
-
-	rdma0: rdma@14008000 {
-		compatible = "mediatek,mt7623-disp-rdma",
-			     "mediatek,mt2701-disp-rdma";
-		reg = <0 0x14008000 0 0x1000>;
-		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&mmsys CLK_MM_DISP_RDMA>;
-		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
-	};
-
-	wdma@14009000 {
-		compatible = "mediatek,mt7623-disp-wdma",
-			     "mediatek,mt2701-disp-wdma";
-		reg = <0 0x14009000 0 0x1000>;
-		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&mmsys CLK_MM_DISP_WDMA>;
-		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
-	};
-
-	bls: pwm@1400a000 {
-		compatible = "mediatek,mt7623-disp-pwm",
-			     "mediatek,mt2701-disp-pwm";
-		reg = <0 0x1400a000 0 0x1000>;
-		#pwm-cells = <2>;
-		clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
-			 <&mmsys CLK_MM_DISP_BLS>;
-		clock-names = "main", "mm";
-		status = "disabled";
-	};
-
-	color: color@1400b000 {
-		compatible = "mediatek,mt7623-disp-color",
-			     "mediatek,mt2701-disp-color";
-		reg = <0 0x1400b000 0 0x1000>;
-		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&mmsys CLK_MM_DISP_COLOR>;
-	};
-
-	dsi: dsi@1400c000 {
-		compatible = "mediatek,mt7623-dsi",
-			     "mediatek,mt2701-dsi";
-		reg = <0 0x1400c000 0 0x1000>;
-		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&mmsys CLK_MM_DSI_ENGINE>,
-			 <&mmsys CLK_MM_DSI_DIG>,
-			 <&mipi_tx0>;
-		clock-names = "engine", "digital", "hs";
-		phys = <&mipi_tx0>;
-		phy-names = "dphy";
-		status = "disabled";
-	};
-
-	mutex: mutex@1400e000 {
-		compatible = "mediatek,mt7623-disp-mutex",
-			     "mediatek,mt2701-disp-mutex";
-		reg = <0 0x1400e000 0 0x1000>;
-		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&mmsys CLK_MM_MUTEX_32K>;
-	};
-
-	rdma1: rdma@14012000 {
-		compatible = "mediatek,mt7623-disp-rdma",
-			     "mediatek,mt2701-disp-rdma";
-		reg = <0 0x14012000 0 0x1000>;
-		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
-		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
-	};
-
-	dpi0: dpi@14014000 {
-		compatible = "mediatek,mt7623-dpi",
-			     "mediatek,mt2701-dpi";
-		reg = <0 0x14014000 0 0x1000>;
-		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&mmsys CLK_MM_DPI1_DIGL>,
-			 <&mmsys CLK_MM_DPI1_ENGINE>,
-			 <&apmixedsys CLK_APMIXED_TVDPLL>;
-		clock-names = "pixel", "engine", "pll";
-		status = "disabled";
-	};
-
-	hdmi0: hdmi@14015000 {
-		compatible = "mediatek,mt7623-hdmi",
-			     "mediatek,mt2701-hdmi";
-		reg = <0 0x14015000 0 0x400>;
-		clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
-			 <&mmsys CLK_MM_HDMI_PLL>,
-			 <&mmsys CLK_MM_HDMI_AUDIO>,
-			 <&mmsys CLK_MM_HDMI_SPDIF>;
-		clock-names = "pixel", "pll", "bclk", "spdif";
-		phys = <&hdmi_phy>;
-		phy-names = "hdmi";
-		mediatek,syscon-hdmi = <&mmsys 0x900>;
-		cec = <&cec>;
-		status = "disabled";
-	};
-
-	mipi_tx0: dsi-phy@10010000 {
-		compatible = "mediatek,mt7623-mipi-tx",
-			     "mediatek,mt2701-mipi-tx";
-		reg = <0 0x10010000 0 0x90>;
-		clocks = <&clk26m>;
-		clock-output-names = "mipi_tx0_pll";
-		#clock-cells = <0>;
-		#phy-cells = <0>;
-	};
-
-	cec: cec@10012000 {
-		compatible = "mediatek,mt7623-cec",
-			     "mediatek,mt8173-cec";
-		reg = <0 0x10012000 0 0xbc>;
-		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_CEC>;
-		status = "disabled";
-	};
-
-	hdmi_phy: hdmi-phy@10209100 {
-		compatible = "mediatek,mt7623-hdmi-phy",
-			     "mediatek,mt2701-hdmi-phy";
-		reg = <0 0x10209100 0 0x24>;
-		clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
-		clock-names = "pll_ref";
-		clock-output-names = "hdmitx_dig_cts";
-		#clock-cells = <0>;
-		#phy-cells = <0>;
-		status = "disabled";
-	};
-
-	hdmiddc0: i2c@11013000 {
-		compatible = "mediatek,mt7623-hdmi-ddc",
-			     "mediatek,mt8173-hdmi-ddc";
-		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
-		reg = <0 0x11013000 0 0x1C>;
-		clocks = <&pericfg CLK_PERI_I2C3>;
-		clock-names = "ddc-i2c";
-		status = "disabled";
-	};
-};
-
-&pio {
-	hdmi_pins_a: hdmi-default {
-		pins-hdmi {
-			pinmux = <MT7623_PIN_123_HTPLG_FUNC_HTPLG>;
-			input-enable;
-			bias-pull-down;
-		};
-	};
-
-	hdmi_ddc_pins_a: hdmi_ddc-default {
-		pins-hdmi-ddc {
-			pinmux = <MT7623_PIN_124_GPIO124_FUNC_HDMISCK>,
-				 <MT7623_PIN_125_GPIO125_FUNC_HDMISD>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
deleted file mode 100644
index 84e14bee7235f..0000000000000
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ /dev/null
@@ -1,275 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 MediaTek Inc.
- * Author: Ryder Lee <ryder.lee@mediatek.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "mt7629.dtsi"
-
-/ {
-	model = "MediaTek MT7629 reference board";
-	compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-reset {
-			label = "factory";
-			linux,code = <KEY_RESTART>;
-			gpios = <&pio 60 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&pio 58 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x10000000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&eth {
-	pinctrl-names = "default";
-	pinctrl-0 = <&eth_pins>;
-	pinctrl-1 = <&ephy_leds_pins>;
-	status = "okay";
-
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "2500base-x";
-		fixed-link {
-			speed = <2500>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	gmac1: mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-mode = "gmii";
-		phy-handle = <&phy0>;
-	};
-
-	mdio: mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-	};
-};
-
-&i2c {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c_pins>;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_pins>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x00000 0x60000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "u-boot-env";
-				reg = <0x60000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@70000 {
-				label = "factory";
-				reg = <0x70000 0x40000>;
-				read-only;
-			};
-
-			partition@b0000 {
-				label = "kernel";
-				reg = <0xb0000 0xb50000>;
-			};
-		};
-	};
-};
-
-&pcie1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_pins>;
-	status = "okay";
-};
-
-&pciephy1 {
-	status = "okay";
-};
-
-&pio {
-	eth_pins: eth-pins {
-		mux {
-			function = "eth";
-			groups = "mdc_mdio";
-		};
-	};
-
-	ephy_leds_pins: ephy-leds-pins {
-		mux {
-			function = "led";
-			groups = "gphy_leds_0", "ephy_leds";
-		};
-	};
-
-	i2c_pins: i2c-pins {
-		mux {
-			function = "i2c";
-			groups =  "i2c_0";
-		};
-
-		conf {
-			pins = "I2C_SDA", "I2C_SCL";
-			drive-strength = <4>;
-			bias-disable;
-		};
-	};
-
-	pcie_pins: pcie-pins {
-		mux {
-			function = "pcie";
-			groups = "pcie_clkreq",
-				 "pcie_pereset",
-				 "pcie_wake";
-		};
-	};
-
-	pwm_pins: pwm-pins {
-		mux {
-			function = "pwm";
-			groups = "pwm_0";
-		};
-	};
-
-	/* SPI-NOR is shared pin with serial NAND */
-	qspi_pins: qspi-pins {
-		mux {
-			function = "flash";
-			groups = "spi_nor";
-		};
-	};
-
-	/* Serial NAND is shared pin with SPI-NOR */
-	serial_nand_pins: serial-nand-pins {
-		mux {
-			function = "flash";
-			groups = "snfi";
-		};
-	};
-
-	spi_pins: spi-pins {
-		mux {
-			function = "spi";
-			groups = "spi_0";
-		};
-	};
-
-	uart0_pins: uart0-pins {
-		mux {
-			function = "uart";
-			groups = "uart0_txd_rxd" ;
-		};
-	};
-
-	uart1_pins: uart1-pins {
-		mux {
-			function = "uart";
-			groups = "uart1_0_tx_rx" ;
-		};
-	};
-
-	uart2_pins: uart2-pins {
-		mux {
-			function = "uart";
-			groups = "uart2_0_txd_rxd" ;
-		};
-	};
-
-	watchdog_pins: watchdog-pins {
-		mux {
-			function = "watchdog";
-			groups = "watchdog";
-		};
-	};
-};
-
-&spi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_pins>;
-	status = "okay";
-};
-
-&ssusb {
-	vusb33-supply = <&reg_3p3v>;
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&u3phy0 {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&watchdog {
-	pinctrl-names = "default";
-	pinctrl-0 = <&watchdog_pins>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
deleted file mode 100644
index acab0883a3bbf..0000000000000
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ /dev/null
@@ -1,491 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 MediaTek Inc.
- *
- * Author: Ryder Lee <ryder.lee@mediatek.com>
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/mt7629-clk.h>
-#include <dt-bindings/power/mt7622-power.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/reset/mt7629-resets.h>
-
-/ {
-	compatible = "mediatek,mt7629";
-	interrupt-parent = <&sysirq>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "mediatek,mt6589-smp";
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			clock-frequency = <1250000000>;
-			cci-control-port = <&cci_control2>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-			clock-frequency = <1250000000>;
-			cci-control-port = <&cci_control2>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	clk20m: oscillator-0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <20000000>;
-		clock-output-names = "clk20m";
-	};
-
-	clk40m: oscillator-1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <40000000>;
-		clock-output-names = "clkxtal";
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		clock-frequency = <20000000>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		infracfg: syscon@10000000 {
-			compatible = "mediatek,mt7629-infracfg", "syscon";
-			reg = <0x10000000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		pericfg: syscon@10002000 {
-			compatible = "mediatek,mt7629-pericfg", "syscon";
-			reg = <0x10002000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		scpsys: power-controller@10006000 {
-			compatible = "mediatek,mt7629-scpsys",
-				     "mediatek,mt7622-scpsys";
-			#power-domain-cells = <1>;
-			reg = <0x10006000 0x1000>;
-			clocks = <&topckgen CLK_TOP_HIF_SEL>;
-			clock-names = "hif_sel";
-			assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
-			infracfg = <&infracfg>;
-		};
-
-		timer: timer@10009000 {
-			compatible = "mediatek,mt7629-timer",
-				     "mediatek,mt6765-timer";
-			reg = <0x10009000 0x60>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk20m>;
-			clock-names = "clk20m";
-		};
-
-		sysirq: interrupt-controller@10200a80 {
-			compatible = "mediatek,mt7629-sysirq",
-				     "mediatek,mt6577-sysirq";
-			reg = <0x10200a80 0x20>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-		};
-
-		apmixedsys: syscon@10209000 {
-			compatible = "mediatek,mt7629-apmixedsys", "syscon";
-			reg = <0x10209000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		rng: rng@1020f000 {
-			compatible = "mediatek,mt7629-rng",
-				     "mediatek,mt7623-rng";
-			reg = <0x1020f000 0x100>;
-			clocks = <&infracfg CLK_INFRA_TRNG_PD>;
-			clock-names = "rng";
-		};
-
-		topckgen: syscon@10210000 {
-			compatible = "mediatek,mt7629-topckgen", "syscon";
-			reg = <0x10210000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		watchdog: watchdog@10212000 {
-			compatible = "mediatek,mt7629-wdt",
-				     "mediatek,mt6589-wdt";
-			reg = <0x10212000 0x100>;
-		};
-
-		pio: pinctrl@10217000 {
-			compatible = "mediatek,mt7629-pinctrl";
-			reg = <0x10217000 0x8000>,
-			      <0x10005000 0x1000>;
-			reg-names = "base", "eint";
-			gpio-controller;
-			gpio-ranges = <&pio 0 0 79>;
-			#gpio-cells = <2>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-		};
-
-		gic: interrupt-controller@10300000 {
-			compatible = "arm,gic-400";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			reg = <0x10310000 0x1000>,
-			      <0x10320000 0x1000>,
-			      <0x10340000 0x2000>,
-			      <0x10360000 0x2000>;
-		};
-
-		cci: cci@10390000 {
-			compatible = "arm,cci-400";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10390000 0x1000>;
-			ranges = <0 0x10390000 0x10000>;
-
-			cci_control0: slave-if@1000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace-lite";
-				reg = <0x1000 0x1000>;
-			};
-
-			cci_control1: slave-if@4000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x4000 0x1000>;
-			};
-
-			cci_control2: slave-if@5000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x5000 0x1000>;
-			};
-
-			pmu@9000 {
-				compatible = "arm,cci-400-pmu,r1";
-				reg = <0x9000 0x5000>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		uart0: serial@11002000 {
-			compatible = "mediatek,mt7629-uart",
-				     "mediatek,mt6577-uart";
-			reg = <0x11002000 0x400>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&topckgen CLK_TOP_UART_SEL>,
-				 <&pericfg CLK_PERI_UART0_PD>;
-			clock-names = "baud", "bus";
-			status = "disabled";
-		};
-
-		uart1: serial@11003000 {
-			compatible = "mediatek,mt7629-uart",
-				     "mediatek,mt6577-uart";
-			reg = <0x11003000 0x400>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&topckgen CLK_TOP_UART_SEL>,
-				 <&pericfg CLK_PERI_UART1_PD>;
-			clock-names = "baud", "bus";
-			status = "disabled";
-		};
-
-		uart2: serial@11004000 {
-			compatible = "mediatek,mt7629-uart",
-				     "mediatek,mt6577-uart";
-			reg = <0x11004000 0x400>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&topckgen CLK_TOP_UART_SEL>,
-				 <&pericfg CLK_PERI_UART2_PD>;
-			clock-names = "baud", "bus";
-			status = "disabled";
-		};
-
-		pwm: pwm@11006000 {
-			compatible = "mediatek,mt7629-pwm";
-			reg = <0x11006000 0x1000>;
-			#pwm-cells = <2>;
-			clocks = <&topckgen CLK_TOP_PWM_SEL>,
-				 <&pericfg CLK_PERI_PWM_PD>,
-				 <&pericfg CLK_PERI_PWM1_PD>;
-			clock-names = "top", "main", "pwm1";
-			assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>;
-			assigned-clock-parents =
-					<&topckgen CLK_TOP_UNIVPLL2_D4>;
-			status = "disabled";
-		};
-
-		i2c: i2c@11007000 {
-			compatible = "mediatek,mt7629-i2c",
-				     "mediatek,mt2712-i2c";
-			reg = <0x11007000 0x90>,
-			      <0x11000100 0x80>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
-			clock-div = <4>;
-			clocks = <&pericfg CLK_PERI_I2C0_PD>,
-				 <&pericfg CLK_PERI_AP_DMA_PD>;
-			clock-names = "main", "dma";
-			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
-			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi: spi@1100a000 {
-			compatible = "mediatek,mt7629-spi",
-				     "mediatek,mt7622-spi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1100a000 0x100>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-				 <&topckgen CLK_TOP_SPI0_SEL>,
-				 <&pericfg CLK_PERI_SPI0_PD>;
-			clock-names = "parent-clk", "sel-clk", "spi-clk";
-			status = "disabled";
-		};
-
-		qspi: spi@11014000 {
-			compatible = "mediatek,mt7629-nor",
-				     "mediatek,mt8173-nor";
-			reg = <0x11014000 0xe0>;
-			clocks = <&pericfg CLK_PERI_FLASH_PD>,
-				 <&topckgen CLK_TOP_FLASH_SEL>;
-			clock-names = "spi", "sf";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		ssusbsys: syscon@1a000000 {
-			compatible = "mediatek,mt7629-ssusbsys", "syscon";
-			reg = <0x1a000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		ssusb: usb@1a0c0000 {
-			compatible = "mediatek,mt7629-xhci",
-				     "mediatek,mtk-xhci";
-			reg = <0x1a0c0000 0x01000>,
-			      <0x1a0c3e00 0x0100>;
-			reg-names = "mac", "ippc";
-			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
-				 <&ssusbsys CLK_SSUSB_REF_EN>,
-				 <&ssusbsys CLK_SSUSB_MCU_EN>,
-				 <&ssusbsys CLK_SSUSB_DMA_EN>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
-			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
-					  <&topckgen CLK_TOP_SATA_SEL>,
-					  <&topckgen CLK_TOP_HIF_SEL>;
-			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
-						 <&topckgen CLK_TOP_UNIVPLL2_D4>,
-						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
-			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
-			phys = <&u2port0 PHY_TYPE_USB2>,
-			       <&u3port0 PHY_TYPE_USB3>;
-			status = "disabled";
-		};
-
-		u3phy0: t-phy@1a0c4000 {
-			compatible = "mediatek,mt7629-tphy",
-				     "mediatek,generic-tphy-v2";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x1a0c4000 0xe00>;
-			status = "disabled";
-
-			u2port0: usb-phy@0 {
-				reg = <0 0x700>;
-				clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
-				clock-names = "ref";
-				#phy-cells = <1>;
-				status = "okay";
-			};
-
-			u3port0: usb-phy@700 {
-				reg = <0x700 0x700>;
-				clocks = <&clk20m>;
-				clock-names = "ref";
-				#phy-cells = <1>;
-				status = "okay";
-			};
-		};
-
-		pciesys: syscon@1a100800 {
-			compatible = "mediatek,mt7629-pciesys", "syscon";
-			reg = <0x1a100800 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		pciecfg: pciecfg@1a140000 {
-			compatible = "mediatek,generic-pciecfg", "syscon";
-			reg = <0x1a140000 0x1000>;
-		};
-
-		pcie1: pcie@1a145000 {
-			compatible = "mediatek,mt7629-pcie";
-			device_type = "pci";
-			reg = <0x1a145000 0x1000>;
-			reg-names = "port1";
-			linux,pci-domain = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-names = "pcie_irq";
-			clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
-				 <&pciesys CLK_PCIE_P0_AHB_EN>,
-				 <&pciesys CLK_PCIE_P1_AUX_EN>,
-				 <&pciesys CLK_PCIE_P1_AXI_EN>,
-				 <&pciesys CLK_PCIE_P1_OBFF_EN>,
-				 <&pciesys CLK_PCIE_P1_PIPE_EN>;
-			clock-names = "sys_ck1", "ahb_ck1",
-				      "aux_ck1", "axi_ck1",
-				      "obff_ck1", "pipe_ck1";
-			assigned-clocks = <&topckgen CLK_TOP_SATA_SEL>,
-					  <&topckgen CLK_TOP_AXI_SEL>,
-					  <&topckgen CLK_TOP_HIF_SEL>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL2_D4>,
-						 <&topckgen CLK_TOP_SYSPLL1_D2>,
-						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
-			phys = <&pcieport1 PHY_TYPE_PCIE>;
-			phy-names = "pcie-phy1";
-			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
-			bus-range = <0x00 0xff>;
-			ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
-			status = "disabled";
-
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-					<0 0 0 2 &pcie_intc1 1>,
-					<0 0 0 3 &pcie_intc1 2>,
-					<0 0 0 4 &pcie_intc1 3>;
-			pcie_intc1: interrupt-controller {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		pciephy1: t-phy@1a14a000 {
-			compatible = "mediatek,mt7629-tphy",
-				     "mediatek,generic-tphy-v2";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x1a14a000 0x1000>;
-			status = "disabled";
-
-			pcieport1: pcie-phy@0 {
-				reg = <0 0x1000>;
-				clocks = <&clk20m>;
-				clock-names = "ref";
-				#phy-cells = <1>;
-				status = "okay";
-			};
-		};
-
-		ethsys: syscon@1b000000 {
-			compatible = "mediatek,mt7629-ethsys", "syscon";
-			reg = <0x1b000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		eth: ethernet@1b100000 {
-			compatible = "mediatek,mt7629-eth","syscon";
-			reg = <0x1b100000 0x20000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&topckgen CLK_TOP_ETH_SEL>,
-				 <&topckgen CLK_TOP_F10M_REF_SEL>,
-				 <&ethsys CLK_ETH_ESW_EN>,
-				 <&ethsys CLK_ETH_GP0_EN>,
-				 <&ethsys CLK_ETH_GP1_EN>,
-				 <&ethsys CLK_ETH_GP2_EN>,
-				 <&ethsys CLK_ETH_FE_EN>,
-				 <&sgmiisys0 CLK_SGMII_TX_EN>,
-				 <&sgmiisys0 CLK_SGMII_RX_EN>,
-				 <&sgmiisys0 CLK_SGMII_CDR_REF>,
-				 <&sgmiisys0 CLK_SGMII_CDR_FB>,
-				 <&sgmiisys1 CLK_SGMII_TX_EN>,
-				 <&sgmiisys1 CLK_SGMII_RX_EN>,
-				 <&sgmiisys1 CLK_SGMII_CDR_REF>,
-				 <&sgmiisys1 CLK_SGMII_CDR_FB>,
-				 <&apmixedsys CLK_APMIXED_SGMIPLL>,
-				 <&apmixedsys CLK_APMIXED_ETH2PLL>;
-			clock-names = "ethif", "sgmiitop", "esw", "gp0", "gp1",
-				      "gp2", "fe", "sgmii_tx250m", "sgmii_rx250m",
-				      "sgmii_cdr_ref", "sgmii_cdr_fb",
-				      "sgmii2_tx250m", "sgmii2_rx250m",
-				      "sgmii2_cdr_ref", "sgmii2_cdr_fb",
-				      "sgmii_ck", "eth2pll";
-			assigned-clocks = <&topckgen CLK_TOP_ETH_SEL>,
-					  <&topckgen CLK_TOP_F10M_REF_SEL>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>,
-						 <&topckgen CLK_TOP_SGMIIPLL_D2>;
-			power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
-			mediatek,ethsys = <&ethsys>;
-			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
-			mediatek,infracfg = <&infracfg>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sgmiisys0: syscon@1b128000 {
-			compatible = "mediatek,mt7629-sgmiisys", "syscon";
-			reg = <0x1b128000 0x3000>;
-			#clock-cells = <1>;
-		};
-
-		sgmiisys1: syscon@1b130000 {
-			compatible = "mediatek,mt7629-sgmiisys", "syscon";
-			reg = <0x1b130000 0x3000>;
-			#clock-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mt8127-moose.dts b/arch/arm/boot/dts/mt8127-moose.dts
deleted file mode 100644
index 560687af87dc5..0000000000000
--- a/arch/arm/boot/dts/mt8127-moose.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2014 MediaTek Inc.
- * Author: Joe.C <yingjoe.chen@mediatek.com>
- *
- */
-
-/dts-v1/;
-#include "mt8127.dtsi"
-
-/ {
-	model = "MediaTek MT8127 Moose Board";
-	compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
deleted file mode 100644
index aced173c2a52e..0000000000000
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2014 MediaTek Inc.
- * Author: Joe.C <yingjoe.chen@mediatek.com>
- *
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	compatible = "mediatek,mt8127";
-	interrupt-parent = <&sysirq>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "mediatek,mt81xx-tz-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x3>;
-		};
-
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		trustzone-bootinfo@80002000 {
-			compatible = "mediatek,trustzone-bootinfo";
-			reg = <0 0x80002000 0 0x1000>;
-		};
-	};
-
-	clocks {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		compatible = "simple-bus";
-		ranges;
-
-		system_clk: dummy13m {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-			#clock-cells = <0>;
-		};
-
-		rtc_clk: dummy32k {
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-			#clock-cells = <0>;
-		};
-
-		uart_clk: dummy26m {
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-			#clock-cells = <0>;
-                };
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <13000000>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		compatible = "simple-bus";
-		ranges;
-
-		timer: timer@10008000 {
-			compatible = "mediatek,mt8127-timer",
-					"mediatek,mt6577-timer";
-			reg = <0 0x10008000 0 0x80>;
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&system_clk>, <&rtc_clk>;
-			clock-names = "system-clk", "rtc-clk";
-		};
-
-		sysirq: interrupt-controller@10200100 {
-			compatible = "mediatek,mt8127-sysirq",
-				     "mediatek,mt6577-sysirq";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			reg = <0 0x10200100 0 0x1c>;
-		};
-
-		gic: interrupt-controller@10211000 {
-			compatible = "arm,cortex-a7-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			reg = <0 0x10211000 0 0x1000>,
-			      <0 0x10212000 0 0x2000>,
-			      <0 0x10214000 0 0x2000>,
-			      <0 0x10216000 0 0x2000>;
-		};
-
-		uart0: serial@11002000 {
-			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
-			reg = <0 0x11002000 0 0x400>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
-			status = "disabled";
-		};
-
-		uart1: serial@11003000 {
-			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
-			reg = <0 0x11003000 0 0x400>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
-			status = "disabled";
-		};
-
-		uart2: serial@11004000 {
-			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
-			reg = <0 0x11004000 0 0x400>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
-			status = "disabled";
-		};
-
-		uart3: serial@11005000 {
-			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
-			reg = <0 0x11005000 0 0x400>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts
deleted file mode 100644
index f6147fe62f415..0000000000000
--- a/arch/arm/boot/dts/mt8135-evbp1.dts
+++ /dev/null
@@ -1,193 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2014 MediaTek Inc.
- * Author: Joe.C <yingjoe.chen@mediatek.com>
- *
- */
-
-/dts-v1/;
-#include "mt8135.dtsi"
-
-/ {
-	model = "MediaTek MT8135 evaluation board";
-	compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-};
-
-&pwrap {
-	pmic: mt6397 {
-		compatible = "mediatek,mt6397";
-
-		mt6397regulator: mt6397regulator {
-			compatible = "mediatek,mt6397-regulator";
-
-			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-name = "vpca15";
-				regulator-min-microvolt = < 850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <12500>;
-				regulator-always-on;
-			};
-
-			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-name = "vpca7";
-				regulator-min-microvolt = < 850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <12500>;
-				regulator-always-on;
-			};
-
-			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-name = "vsramca15";
-				regulator-min-microvolt = < 850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <12500>;
-				regulator-always-on;
-			};
-
-			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-name = "vsramca7";
-				regulator-min-microvolt = < 850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <12500>;
-				regulator-always-on;
-			};
-
-			mt6397_vcore_reg: buck_vcore {
-				regulator-name = "vcore";
-				regulator-min-microvolt = < 850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <12500>;
-				regulator-always-on;
-			};
-
-			mt6397_vgpu_reg: buck_vgpu {
-				regulator-name = "vgpu";
-				regulator-min-microvolt = < 700000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <12500>;
-				regulator-enable-ramp-delay = <115>;
-			};
-
-			mt6397_vdrm_reg: buck_vdrm {
-				regulator-name = "vdrm";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-ramp-delay = <12500>;
-				regulator-always-on;
-			};
-
-			mt6397_vio18_reg: buck_vio18 {
-				regulator-name = "vio18";
-				regulator-min-microvolt = <1620000>;
-				regulator-max-microvolt = <1980000>;
-				regulator-ramp-delay = <12500>;
-				regulator-always-on;
-			};
-
-			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-name = "vtcxo";
-				regulator-always-on;
-			};
-
-			mt6397_va28_reg: ldo_va28 {
-				regulator-name = "va28";
-				regulator-always-on;
-			};
-
-			mt6397_vcama_reg: ldo_vcama {
-				regulator-name = "vcama";
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-enable-ramp-delay = <218>;
-			};
-
-			mt6397_vio28_reg: ldo_vio28 {
-				regulator-name = "vio28";
-				regulator-always-on;
-			};
-
-			mt6397_vusb_reg: ldo_vusb {
-				regulator-name = "vusb";
-			};
-
-			mt6397_vmc_reg: ldo_vmc {
-				regulator-name = "vmc";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <218>;
-			};
-
-			mt6397_vmch_reg: ldo_vmch {
-				regulator-name = "vmch";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <218>;
-			};
-
-			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-name = "vemc_3v3";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <218>;
-			};
-
-			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-name = "vcamd";
-				regulator-min-microvolt = <1220000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <240>;
-			};
-
-			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-name = "vcamio";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <218>;
-			};
-
-			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-name = "vcamaf";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <218>;
-			};
-
-			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-name = "vgp4";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <218>;
-			};
-
-			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-name = "vgp5";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-enable-ramp-delay = <218>;
-			};
-
-			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-name = "vgp6";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <218>;
-			};
-
-			mt6397_vibr_reg: ldo_vibr {
-				regulator-name = "vibr";
-				regulator-min-microvolt = <1300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-enable-ramp-delay = <218>;
-			};
-		};
-	};
-};
-
-&uart3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
deleted file mode 100644
index 0f291ad22d3af..0000000000000
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ /dev/null
@@ -1,259 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2014 MediaTek Inc.
- * Author: Joe.C <yingjoe.chen@mediatek.com>
- *
- */
-
-#include <dt-bindings/clock/mt8135-clk.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset/mt8135-resets.h>
-#include <dt-bindings/pinctrl/mt8135-pinfunc.h>
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	compatible = "mediatek,mt8135";
-	interrupt-parent = <&sysirq>;
-
-	cpu-map {
-		cluster0 {
-			core0 {
-				cpu = <&cpu0>;
-			};
-			core1 {
-				cpu = <&cpu1>;
-			};
-		};
-
-		cluster1 {
-			core0 {
-				cpu = <&cpu2>;
-			};
-			core1 {
-				cpu = <&cpu3>;
-			};
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "mediatek,mt81xx-tz-smp";
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x001>;
-		};
-
-		cpu2: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x100>;
-		};
-
-		cpu3: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x101>;
-		};
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		trustzone-bootinfo@80002000 {
-			compatible = "mediatek,trustzone-bootinfo";
-			reg = <0 0x80002000 0 0x1000>;
-		};
-	};
-
-	clocks {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		compatible = "simple-bus";
-		ranges;
-
-		system_clk: dummy13m {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-			#clock-cells = <0>;
-		};
-
-		rtc_clk: dummy32k {
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-			#clock-cells = <0>;
-		};
-
-		clk26m: clk26m {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <13000000>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		compatible = "simple-bus";
-		ranges;
-
-		topckgen: topckgen@10000000 {
-			compatible = "mediatek,mt8135-topckgen";
-			reg = <0 0x10000000 0 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		infracfg: infracfg@10001000 {
-			#reset-cells = <1>;
-			#clock-cells = <1>;
-			compatible = "mediatek,mt8135-infracfg", "syscon";
-			reg = <0 0x10001000 0 0x1000>;
-		};
-
-		pericfg: pericfg@10003000 {
-			#reset-cells = <1>;
-			#clock-cells = <1>;
-			compatible = "mediatek,mt8135-pericfg", "syscon";
-			reg = <0 0x10003000 0 0x1000>;
-		};
-
-		/*
-		 * Pinctrl access register at 0x10005000 and 0x1020c000 through
-		 * regmap. Register 0x1000b000 is used by EINT.
-		 */
-		pio: pinctrl@10005000 {
-			compatible = "mediatek,mt8135-pinctrl";
-			reg = <0 0x1000b000 0 0x1000>;
-			mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		syscfg_pctl_a: syscfg_pctl_a@10005000 {
-			compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
-			reg = <0 0x10005000 0 0x1000>;
-		};
-
-		timer: timer@10008000 {
-			compatible = "mediatek,mt8135-timer",
-					"mediatek,mt6577-timer";
-			reg = <0 0x10008000 0 0x80>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&system_clk>, <&rtc_clk>;
-			clock-names = "system-clk", "rtc-clk";
-		};
-
-		pwrap: pwrap@1000f000 {
-			compatible = "mediatek,mt8135-pwrap";
-			reg = <0 0x1000f000 0 0x1000>,
-				<0 0x11017000 0 0x1000>;
-			reg-names = "pwrap", "pwrap-bridge";
-			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
-					<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
-			reset-names = "pwrap", "pwrap-bridge";
-			clocks = <&clk26m>, <&clk26m>;
-			clock-names = "spi", "wrap";
-		};
-
-		sysirq: interrupt-controller@10200030 {
-			compatible = "mediatek,mt8135-sysirq",
-				     "mediatek,mt6577-sysirq";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			reg = <0 0x10200030 0 0x1c>;
-		};
-
-		apmixedsys: apmixedsys@10209000 {
-			compatible = "mediatek,mt8135-apmixedsys";
-			reg = <0 0x10209000 0 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		syscfg_pctl_b: syscfg_pctl_b@1020c000 {
-			compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
-			reg = <0 0x1020c000 0 0x1000>;
-		};
-
-		gic: interrupt-controller@10211000 {
-			compatible = "arm,cortex-a15-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			reg = <0 0x10211000 0 0x1000>,
-			      <0 0x10212000 0 0x2000>,
-			      <0 0x10214000 0 0x2000>,
-			      <0 0x10216000 0 0x2000>;
-		};
-
-		uart0: serial@11006000 {
-			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
-			reg = <0 0x11006000 0 0x400>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
-			clock-names = "baud", "bus";
-			status = "disabled";
-		};
-
-		uart1: serial@11007000 {
-			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
-			reg = <0 0x11007000 0 0x400>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
-			clock-names = "baud", "bus";
-			status = "disabled";
-		};
-
-		uart2: serial@11008000 {
-			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
-			reg = <0 0x11008000 0 0x400>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
-			clock-names = "baud", "bus";
-			status = "disabled";
-		};
-
-		uart3: serial@11009000 {
-			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
-			reg = <0 0x11009000 0 0x400>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
-			clock-names = "baud", "bus";
-			status = "disabled";
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi
deleted file mode 100644
index e172029a0c4de..0000000000000
--- a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Device Tree common file for gpio-fan on Buffalo Linkstation
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	gpio_fan {
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
-		pinctrl-names = "default";
-
-		gpio-fan,speed-map =
-			<0		3
-			1500	2
-			3250	1
-			5000	0>;
-	};
-};
-
-&pinctrl {
-	pmx_fan_low: pmx-fan-low {
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_high: pmx-fan-high {
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_lock: pmx-fan-lock {
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi
deleted file mode 100644
index c2d87ba6190a3..0000000000000
--- a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Device Tree common file for gpio-{keys,leds} on Buffalo Linkstation
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_switch>;
-		pinctrl-names = "default";
-
-		power-on-switch {
-			label = "Power-on Switch";
-			linux,code = <KEY_RESERVED>;
-			linux,input-type = <5>;
-		};
-
-		power-auto-switch {
-			label = "Power-auto Switch";
-			linux,code = <KEY_ESC>;
-			linux,input-type = <5>;
-		};
-	};
-
-	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info>;
-		pinctrl-names = "default";
-
-		blue-power-led {
-			label = "linkstation:blue:power";
-			default-state = "keep";
-		};
-
-		red-alarm-led {
-			label = "linkstation:red:alarm";
-		};
-
-		amber-info-led {
-			label = "linkstation:amber:info";
-		};
-	};
-};
-
-&pinctrl {
-	pmx_power_switch: pmx-power-switch {
-		marvell,function = "gpio";
-	};
-
-	pmx_led_power: pmx-leds {
-		marvell,function = "gpio";
-	};
-
-	pmx_led_alarm: pmx-leds {
-		marvell,function = "gpio";
-	};
-
-	pmx_led_info: pmx-leds {
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/mxs-pinfunc.h b/arch/arm/boot/dts/mxs-pinfunc.h
deleted file mode 100644
index 31297abcbc715..0000000000000
--- a/arch/arm/boot/dts/mxs-pinfunc.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Header providing constants for i.MX28 pinctrl bindings.
- *
- * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- */
-
-#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
-#define __DT_BINDINGS_MXS_PINCTRL_H__
-
-/* fsl,drive-strength property */
-#define MXS_DRIVE_4mA		0
-#define MXS_DRIVE_8mA		1
-#define MXS_DRIVE_12mA		2
-#define MXS_DRIVE_16mA		3
-
-/* fsl,voltage property */
-#define MXS_VOLTAGE_LOW		0
-#define MXS_VOLTAGE_HIGH	1
-
-/* fsl,pull-up property */
-#define MXS_PULL_DISABLE	0
-#define MXS_PULL_ENABLE		1
-
-#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi
deleted file mode 100644
index 01e1bb7c3c6cb..0000000000000
--- a/arch/arm/boot/dts/nspire-classic.dtsi
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/boot/nspire-classic.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-
-/include/ "nspire.dtsi"
-
-&lcd {
-	port {
-		clcd_pads: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&fast_timer {
-	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x90010000 0x1000>, <0x900a0010 0x8>;
-};
-
-&uart {
-	compatible = "ns16550";
-	reg-shift = <2>;
-	reg-io-width = <4>;
-	clocks = <&apb_pclk>;
-	no-loopback-test;
-};
-
-&timer0 {
-	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x900c0000 0x1000>, <0x900a0018 0x8>;
-};
-
-&timer1 {
-	compatible = "lsi,zevio-timer";
-	reg = <0x900d0000 0x1000>, <0x900a0020 0x8>;
-};
-
-&keypad {
-	active-low;
-
-};
-
-&base_clk {
-	compatible = "lsi,nspire-classic-clock";
-};
-
-&ahb_clk {
-	compatible = "lsi,nspire-classic-ahb-divider";
-};
-
-
-&vbus_reg {
-	gpio = <&gpio 5 0>;
-};
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x10000000 0x2000000>; /* 32 MB */
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		intc: interrupt-controller@dc000000 {
-			compatible = "lsi,zevio-intc";
-			interrupt-controller;
-			reg = <0xdc000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-	};
-
-	panel {
-		compatible = "ti,nspire-classic-lcd-panel";
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&clcd_pads>;
-			};
-		};
-	};
-	chosen {
-		bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0";
-	};
-};
diff --git a/arch/arm/boot/dts/nspire-clp.dts b/arch/arm/boot/dts/nspire-clp.dts
deleted file mode 100644
index f52f38c615886..0000000000000
--- a/arch/arm/boot/dts/nspire-clp.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/boot/nspire-clp.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-/dts-v1/;
-
-/include/ "nspire-classic.dtsi"
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00020039
-	0x0004002c 	0x00050034 	0x00060015
-	0x0007000b 	0x0008002d 	0x01000033
-	0x0101004e 	0x01020011 	0x01030004
-	0x0104002f 	0x01050003 	0x01060016
-	0x01070002 	0x01080014 	0x02000062
-	0x0201000c 	0x0202001f 	0x02030007
-	0x02040013 	0x02050006 	0x02060010
-	0x02070005 	0x02080019 	0x03000027
-	0x03010037 	0x03020018 	0x0303000a
-	0x03040031 	0x03050009 	0x03060032
-	0x03070008 	0x03080026 	0x04000028
-	0x04010035 	0x04020025 	0x04040024
-	0x04060017 	0x04080023 	0x05000028
-	0x05020022 	0x0503001b 	0x05040021
-	0x0505001a 	0x05060012 	0x0507006f
-	0x05080020 	0x0509002a 	0x0601001c
-	0x0602002e 	0x06030068 	0x06040030
-	0x0605006d 	0x0606001e 	0x06070001
-	0x0608002b 	0x0609000f 	0x07000067
-	0x0702006a 	0x0704006c 	0x07060069
-	0x0707000e 	0x0708001d 	0x070a000d
-	>;
-};
-
-/ {
-	model = "TI-NSPIRE Clickpad";
-	compatible = "ti,nspire-clp";
-};
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
deleted file mode 100644
index 590b7dff6ae50..0000000000000
--- a/arch/arm/boot/dts/nspire-cx.dts
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/boot/nspire-cx.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-/dts-v1/;
-
-/include/ "nspire.dtsi"
-
-&lcd {
-	port {
-		clcd_pads: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&fast_timer {
-	/* compatible = "arm,sp804", "arm,primecell"; */
-};
-
-&uart {
-	compatible = "arm,pl011", "arm,primecell";
-
-	clocks = <&uart_clk>, <&apb_pclk>;
-	clock-names = "uart_clk", "apb_pclk";
-};
-
-&timer0 {
-	compatible = "arm,sp804", "arm,primecell";
-};
-
-&timer1 {
-	compatible = "arm,sp804", "arm,primecell";
-};
-
-&base_clk {
-	compatible = "lsi,nspire-cx-clock";
-};
-
-&ahb_clk {
-	compatible = "lsi,nspire-cx-ahb-divider";
-};
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00040039
-	0x0005002c 	0x00060015 	0x0007000b
-	0x0008000f 	0x0100002d 	0x01010011
-	0x0102002f 	0x01030004 	0x01040016
-	0x01050014 	0x0106001f 	0x01070002
-	0x010a006a 	0x02000013 	0x02010010
-	0x02020019 	0x02030007 	0x02040018
-	0x02050031 	0x02060032 	0x02070005
-	0x02080028 	0x0209006c 	0x03000026
-	0x03010025 	0x03020024 	0x0303000a
-	0x03040017 	0x03050023 	0x03060022
-	0x03070008 	0x03080035 	0x03090069
-	0x04000021 	0x04010012 	0x04020020
-	0x0404002e 	0x04050030 	0x0406001e
-	0x0407000d 	0x04080037 	0x04090067
-	0x05010038 	0x0502000c 	0x0503001b
-	0x05040034 	0x0505001a 	0x05060006
-	0x05080027 	0x0509000e 	0x050a006f
-	0x0600002b 	0x0602004e 	0x06030068
-	0x06040003 	0x0605006d 	0x06060009
-	0x06070001 	0x0609000f 	0x0708002a
-	0x0709001d 	0x070a0033 	>;
-};
-
-&vbus_reg {
-	gpio = <&gpio 2 0>;
-};
-
-/ {
-	model = "TI-NSPIRE CX";
-	compatible = "ti,nspire-cx";
-
-	memory {
-		device_type = "memory";
-		reg = <0x10000000 0x4000000>; /* 64 MB */
-	};
-
-	uart_clk: uart_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		intc: interrupt-controller@dc000000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xdc000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		apb@90000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			i2c@90050000 {
-				compatible = "snps,designware-i2c";
-				reg = <0x90050000 0x1000>;
-				interrupts = <20>;
-			};
-		};
-	};
-
-	panel {
-		compatible = "ti,nspire-cx-lcd-panel";
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&clcd_pads>;
-			};
-		};
-	};
-	chosen {
-		bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
-	};
-};
diff --git a/arch/arm/boot/dts/nspire-tp.dts b/arch/arm/boot/dts/nspire-tp.dts
deleted file mode 100644
index f7d0faacd4ccd..0000000000000
--- a/arch/arm/boot/dts/nspire-tp.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/boot/nspire-tp.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-/dts-v1/;
-
-/include/ "nspire-classic.dtsi"
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00040039
-	0x0005002c 	0x00060015 	0x0007000b
-	0x0008000f 	0x0100002d 	0x01010011
-	0x0102002f 	0x01030004 	0x01040016
-	0x01050014 	0x0106001f 	0x01070002
-	0x010a006a 	0x02000013 	0x02010010
-	0x02020019 	0x02030007 	0x02040018
-	0x02050031 	0x02060032 	0x02070005
-	0x02080028 	0x0209006c 	0x03000026
-	0x03010025 	0x03020024 	0x0303000a
-	0x03040017 	0x03050023 	0x03060022
-	0x03070008 	0x03080035 	0x03090069
-	0x04000021 	0x04010012 	0x04020020
-	0x0404002e 	0x04050030 	0x0406001e
-	0x0407000d 	0x04080037 	0x04090067
-	0x05010038 	0x0502000c 	0x0503001b
-	0x05040034 	0x0505001a 	0x05060006
-	0x05080027 	0x0509000e 	0x050a006f
-	0x0600002b 	0x0602004e 	0x06030068
-	0x06040003 	0x0605006d 	0x06060009
-	0x06070001 	0x0609000f 	0x0708002a
-	0x0709001d 	0x070a0033 	>;
-};
-
-/ {
-	model = "TI-NSPIRE Touchpad";
-	compatible = "ti,nspire-tp";
-};
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
deleted file mode 100644
index bb240e6a3a6f1..0000000000000
--- a/arch/arm/boot/dts/nspire.dtsi
+++ /dev/null
@@ -1,203 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/boot/nspire.dtsi
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-		};
-	};
-
-	bootrom: bootrom@0 {
-		reg = <0x00000000 0x80000>;
-	};
-
-	sram: sram@a4000000 {
-		device = "memory";
-		reg = <0xa4000000 0x20000>;
-	};
-
-	timer_clk: timer_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	base_clk: base_clk {
-		#clock-cells = <0>;
-		reg = <0x900b0024 0x4>;
-	};
-
-	ahb_clk: ahb_clk {
-		#clock-cells = <0>;
-		reg = <0x900b0024 0x4>;
-		clocks = <&base_clk>;
-	};
-
-	apb_pclk: apb_pclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <2>;
-		clock-mult = <1>;
-		clocks = <&ahb_clk>;
-	};
-
-	usb_phy: usb_phy {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	vbus_reg: vbus_reg {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB VBUS output";
-		regulator-type = "voltage";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		spi: spi@a9000000 {
-			reg = <0xa9000000 0x1000>;
-		};
-
-		usb0: usb@b0000000 {
-			compatible = "lsi,zevio-usb";
-			reg = <0xb0000000 0x1000>;
-			interrupts = <8>;
-
-			usb-phy = <&usb_phy>;
-			vbus-supply = <&vbus_reg>;
-		};
-
-		usb1: usb@b4000000 {
-			reg = <0xb4000000 0x1000>;
-			interrupts = <9>;
-			status = "disabled";
-		};
-
-		lcd: lcd@c0000000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0xc0000000 0x1000>;
-			interrupts = <21>;
-
-			/*
-			 * We assume the same clock is fed to APB and CLCDCLK.
-			 * There is some code to scale the clock down by a factor
-			 * 48 for the display so likely the frequency to the
-			 * display is 1MHz and the CLCDCLK is 48 MHz.
-			 */
-			clocks = <&apb_pclk>, <&apb_pclk>;
-			clock-names = "clcdclk", "apb_pclk";
-		};
-
-		adc: adc@c4000000 {
-			reg = <0xc4000000 0x1000>;
-			interrupts = <11>;
-		};
-
-		tdes: crypto@c8010000 {
-			reg = <0xc8010000 0x1000>;
-		};
-
-		sha256: crypto@cc000000 {
-			reg = <0xcc000000 0x1000>;
-		};
-
-		apb@90000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clock-ranges;
-			ranges;
-
-			gpio: gpio@90000000 {
-				compatible = "lsi,zevio-gpio";
-				reg = <0x90000000 0x1000>;
-				interrupts = <7>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			fast_timer: timer@90010000 {
-				reg = <0x90010000 0x1000>;
-				interrupts = <17>;
-			};
-
-			uart: serial@90020000 {
-				reg = <0x90020000 0x1000>;
-				interrupts = <1>;
-			};
-
-			timer0: timer@900c0000 {
-				reg = <0x900c0000 0x1000>;
-				clocks = <&timer_clk>, <&timer_clk>,
-					 <&timer_clk>;
-				clock-names = "timer0clk", "timer1clk",
-					      "apb_pclk";
-			};
-
-			timer1: timer@900d0000 {
-				reg = <0x900d0000 0x1000>;
-				interrupts = <19>;
-				clocks = <&timer_clk>, <&timer_clk>,
-					 <&timer_clk>;
-				clock-names = "timer0clk", "timer1clk",
-					      "apb_pclk";
-			};
-
-			watchdog: watchdog@90060000 {
-				compatible = "arm,amba-primecell";
-				reg = <0x90060000 0x1000>;
-				interrupts = <3>;
-			};
-
-			rtc: rtc@90090000 {
-				reg = <0x90090000 0x1000>;
-				interrupts = <4>;
-			};
-
-			misc: misc@900a0000 {
-				reg = <0x900a0000 0x1000>;
-			};
-
-			pwr: pwr@900b0000 {
-				reg = <0x900b0000 0x1000>;
-				interrupts = <15>;
-			};
-
-			keypad: input@900e0000 {
-				compatible = "ti,nspire-keypad";
-				reg = <0x900e0000 0x1000>;
-				interrupts = <16>;
-
-				scan-interval = <1000>;
-				row-delay = <200>;
-
-				clocks = <&apb_pclk>;
-			};
-
-			contrast: contrast@900f0000 {
-				reg = <0x900f0000 0x1000>;
-			};
-
-			led: led@90110000 {
-				reg = <0x90110000 0x1000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/nspire/Makefile b/arch/arm/boot/dts/nspire/Makefile
new file mode 100644
index 0000000000000..82a2515bdd460
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_NSPIRE) += \
+	nspire-cx.dtb \
+	nspire-tp.dtb \
+	nspire-clp.dtb
diff --git a/arch/arm/boot/dts/nspire/nspire-classic.dtsi b/arch/arm/boot/dts/nspire/nspire-classic.dtsi
new file mode 100644
index 0000000000000..01e1bb7c3c6cb
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire-classic.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/boot/nspire-classic.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+/include/ "nspire.dtsi"
+
+&lcd {
+	port {
+		clcd_pads: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&fast_timer {
+	/* compatible = "lsi,zevio-timer"; */
+	reg = <0x90010000 0x1000>, <0x900a0010 0x8>;
+};
+
+&uart {
+	compatible = "ns16550";
+	reg-shift = <2>;
+	reg-io-width = <4>;
+	clocks = <&apb_pclk>;
+	no-loopback-test;
+};
+
+&timer0 {
+	/* compatible = "lsi,zevio-timer"; */
+	reg = <0x900c0000 0x1000>, <0x900a0018 0x8>;
+};
+
+&timer1 {
+	compatible = "lsi,zevio-timer";
+	reg = <0x900d0000 0x1000>, <0x900a0020 0x8>;
+};
+
+&keypad {
+	active-low;
+
+};
+
+&base_clk {
+	compatible = "lsi,nspire-classic-clock";
+};
+
+&ahb_clk {
+	compatible = "lsi,nspire-classic-ahb-divider";
+};
+
+
+&vbus_reg {
+	gpio = <&gpio 5 0>;
+};
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x10000000 0x2000000>; /* 32 MB */
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		intc: interrupt-controller@dc000000 {
+			compatible = "lsi,zevio-intc";
+			interrupt-controller;
+			reg = <0xdc000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	panel {
+		compatible = "ti,nspire-classic-lcd-panel";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&clcd_pads>;
+			};
+		};
+	};
+	chosen {
+		bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0";
+	};
+};
diff --git a/arch/arm/boot/dts/nspire/nspire-clp.dts b/arch/arm/boot/dts/nspire/nspire-clp.dts
new file mode 100644
index 0000000000000..f52f38c615886
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire-clp.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/boot/nspire-clp.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+/dts-v1/;
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+	linux,keymap = <
+	0x0000001c 	0x0001001c 	0x00020039
+	0x0004002c 	0x00050034 	0x00060015
+	0x0007000b 	0x0008002d 	0x01000033
+	0x0101004e 	0x01020011 	0x01030004
+	0x0104002f 	0x01050003 	0x01060016
+	0x01070002 	0x01080014 	0x02000062
+	0x0201000c 	0x0202001f 	0x02030007
+	0x02040013 	0x02050006 	0x02060010
+	0x02070005 	0x02080019 	0x03000027
+	0x03010037 	0x03020018 	0x0303000a
+	0x03040031 	0x03050009 	0x03060032
+	0x03070008 	0x03080026 	0x04000028
+	0x04010035 	0x04020025 	0x04040024
+	0x04060017 	0x04080023 	0x05000028
+	0x05020022 	0x0503001b 	0x05040021
+	0x0505001a 	0x05060012 	0x0507006f
+	0x05080020 	0x0509002a 	0x0601001c
+	0x0602002e 	0x06030068 	0x06040030
+	0x0605006d 	0x0606001e 	0x06070001
+	0x0608002b 	0x0609000f 	0x07000067
+	0x0702006a 	0x0704006c 	0x07060069
+	0x0707000e 	0x0708001d 	0x070a000d
+	>;
+};
+
+/ {
+	model = "TI-NSPIRE Clickpad";
+	compatible = "ti,nspire-clp";
+};
diff --git a/arch/arm/boot/dts/nspire/nspire-cx.dts b/arch/arm/boot/dts/nspire/nspire-cx.dts
new file mode 100644
index 0000000000000..590b7dff6ae50
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire-cx.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/boot/nspire-cx.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+/dts-v1/;
+
+/include/ "nspire.dtsi"
+
+&lcd {
+	port {
+		clcd_pads: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&fast_timer {
+	/* compatible = "arm,sp804", "arm,primecell"; */
+};
+
+&uart {
+	compatible = "arm,pl011", "arm,primecell";
+
+	clocks = <&uart_clk>, <&apb_pclk>;
+	clock-names = "uart_clk", "apb_pclk";
+};
+
+&timer0 {
+	compatible = "arm,sp804", "arm,primecell";
+};
+
+&timer1 {
+	compatible = "arm,sp804", "arm,primecell";
+};
+
+&base_clk {
+	compatible = "lsi,nspire-cx-clock";
+};
+
+&ahb_clk {
+	compatible = "lsi,nspire-cx-ahb-divider";
+};
+
+&keypad {
+	linux,keymap = <
+	0x0000001c 	0x0001001c 	0x00040039
+	0x0005002c 	0x00060015 	0x0007000b
+	0x0008000f 	0x0100002d 	0x01010011
+	0x0102002f 	0x01030004 	0x01040016
+	0x01050014 	0x0106001f 	0x01070002
+	0x010a006a 	0x02000013 	0x02010010
+	0x02020019 	0x02030007 	0x02040018
+	0x02050031 	0x02060032 	0x02070005
+	0x02080028 	0x0209006c 	0x03000026
+	0x03010025 	0x03020024 	0x0303000a
+	0x03040017 	0x03050023 	0x03060022
+	0x03070008 	0x03080035 	0x03090069
+	0x04000021 	0x04010012 	0x04020020
+	0x0404002e 	0x04050030 	0x0406001e
+	0x0407000d 	0x04080037 	0x04090067
+	0x05010038 	0x0502000c 	0x0503001b
+	0x05040034 	0x0505001a 	0x05060006
+	0x05080027 	0x0509000e 	0x050a006f
+	0x0600002b 	0x0602004e 	0x06030068
+	0x06040003 	0x0605006d 	0x06060009
+	0x06070001 	0x0609000f 	0x0708002a
+	0x0709001d 	0x070a0033 	>;
+};
+
+&vbus_reg {
+	gpio = <&gpio 2 0>;
+};
+
+/ {
+	model = "TI-NSPIRE CX";
+	compatible = "ti,nspire-cx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x10000000 0x4000000>; /* 64 MB */
+	};
+
+	uart_clk: uart_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		intc: interrupt-controller@dc000000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xdc000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		apb@90000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			i2c@90050000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x90050000 0x1000>;
+				interrupts = <20>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "ti,nspire-cx-lcd-panel";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&clcd_pads>;
+			};
+		};
+	};
+	chosen {
+		bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
+	};
+};
diff --git a/arch/arm/boot/dts/nspire/nspire-tp.dts b/arch/arm/boot/dts/nspire/nspire-tp.dts
new file mode 100644
index 0000000000000..f7d0faacd4ccd
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire-tp.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/boot/nspire-tp.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+/dts-v1/;
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+	linux,keymap = <
+	0x0000001c 	0x0001001c 	0x00040039
+	0x0005002c 	0x00060015 	0x0007000b
+	0x0008000f 	0x0100002d 	0x01010011
+	0x0102002f 	0x01030004 	0x01040016
+	0x01050014 	0x0106001f 	0x01070002
+	0x010a006a 	0x02000013 	0x02010010
+	0x02020019 	0x02030007 	0x02040018
+	0x02050031 	0x02060032 	0x02070005
+	0x02080028 	0x0209006c 	0x03000026
+	0x03010025 	0x03020024 	0x0303000a
+	0x03040017 	0x03050023 	0x03060022
+	0x03070008 	0x03080035 	0x03090069
+	0x04000021 	0x04010012 	0x04020020
+	0x0404002e 	0x04050030 	0x0406001e
+	0x0407000d 	0x04080037 	0x04090067
+	0x05010038 	0x0502000c 	0x0503001b
+	0x05040034 	0x0505001a 	0x05060006
+	0x05080027 	0x0509000e 	0x050a006f
+	0x0600002b 	0x0602004e 	0x06030068
+	0x06040003 	0x0605006d 	0x06060009
+	0x06070001 	0x0609000f 	0x0708002a
+	0x0709001d 	0x070a0033 	>;
+};
+
+/ {
+	model = "TI-NSPIRE Touchpad";
+	compatible = "ti,nspire-tp";
+};
diff --git a/arch/arm/boot/dts/nspire/nspire.dtsi b/arch/arm/boot/dts/nspire/nspire.dtsi
new file mode 100644
index 0000000000000..088bcc38589fb
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire.dtsi
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/boot/nspire.dtsi
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+		};
+	};
+
+	bootrom: bootrom@0 {
+		reg = <0x00000000 0x80000>;
+	};
+
+	sram: sram@a4000000 {
+		device = "memory";
+		reg = <0xa4000000 0x20000>;
+	};
+
+	timer_clk: timer_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	base_clk: base_clk {
+		#clock-cells = <0>;
+		reg = <0x900b0024 0x4>;
+	};
+
+	ahb_clk: ahb_clk {
+		#clock-cells = <0>;
+		reg = <0x900b0024 0x4>;
+		clocks = <&base_clk>;
+	};
+
+	apb_pclk: apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&ahb_clk>;
+	};
+
+	usb_phy: usb_phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	vbus_reg: vbus_reg {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB VBUS output";
+		regulator-type = "voltage";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		spi: spi@a9000000 {
+			reg = <0xa9000000 0x1000>;
+		};
+
+		usb0: usb@b0000000 {
+			compatible = "lsi,zevio-usb";
+			reg = <0xb0000000 0x1000>;
+			interrupts = <8>;
+
+			usb-phy = <&usb_phy>;
+			vbus-supply = <&vbus_reg>;
+		};
+
+		usb1: usb@b4000000 {
+			reg = <0xb4000000 0x1000>;
+			interrupts = <9>;
+			status = "disabled";
+		};
+
+		lcd: lcd@c0000000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0xc0000000 0x1000>;
+			interrupts = <21>;
+
+			/*
+			 * We assume the same clock is fed to APB and CLCDCLK.
+			 * There is some code to scale the clock down by a factor
+			 * 48 for the display so likely the frequency to the
+			 * display is 1MHz and the CLCDCLK is 48 MHz.
+			 */
+			clocks = <&apb_pclk>, <&apb_pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+		};
+
+		adc: adc@c4000000 {
+			reg = <0xc4000000 0x1000>;
+			interrupts = <11>;
+		};
+
+		tdes: crypto@c8010000 {
+			reg = <0xc8010000 0x1000>;
+		};
+
+		sha256: crypto@cc000000 {
+			reg = <0xcc000000 0x1000>;
+		};
+
+		apb@90000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-ranges;
+			ranges;
+
+			gpio: gpio@90000000 {
+				compatible = "lsi,zevio-gpio";
+				reg = <0x90000000 0x1000>;
+				interrupts = <7>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			fast_timer: timer@90010000 {
+				reg = <0x90010000 0x1000>;
+				interrupts = <17>;
+			};
+
+			uart: serial@90020000 {
+				reg = <0x90020000 0x1000>;
+				interrupts = <1>;
+			};
+
+			timer0: timer@900c0000 {
+				reg = <0x900c0000 0x1000>;
+				clocks = <&timer_clk>, <&timer_clk>,
+					 <&timer_clk>;
+				clock-names = "timer0clk", "timer1clk",
+					      "apb_pclk";
+			};
+
+			timer1: timer@900d0000 {
+				reg = <0x900d0000 0x1000>;
+				interrupts = <19>;
+				clocks = <&timer_clk>, <&timer_clk>,
+					 <&timer_clk>;
+				clock-names = "timer0clk", "timer1clk",
+					      "apb_pclk";
+			};
+
+			watchdog: watchdog@90060000 {
+				compatible = "arm,primecell";
+				reg = <0x90060000 0x1000>;
+				interrupts = <3>;
+			};
+
+			rtc: rtc@90090000 {
+				reg = <0x90090000 0x1000>;
+				interrupts = <4>;
+			};
+
+			misc: misc@900a0000 {
+				reg = <0x900a0000 0x1000>;
+			};
+
+			pwr: pwr@900b0000 {
+				reg = <0x900b0000 0x1000>;
+				interrupts = <15>;
+			};
+
+			keypad: input@900e0000 {
+				compatible = "ti,nspire-keypad";
+				reg = <0x900e0000 0x1000>;
+				interrupts = <16>;
+
+				scan-interval = <1000>;
+				row-delay = <200>;
+
+				clocks = <&apb_pclk>;
+			};
+
+			contrast: contrast@900f0000 {
+				reg = <0x900f0000 0x1000>;
+			};
+
+			led: led@90110000 {
+				reg = <0x90110000 0x1000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
deleted file mode 100644
index c7b5ef15b7162..0000000000000
--- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
+++ /dev/null
@@ -1,1123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
-// Copyright 2018 Google, Inc.
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
-#include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	/* external reference clock */
-	clk_refclk: clk_refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-		clock-output-names = "refclk";
-	};
-
-	/* external reference clock for cpu. float in normal operation */
-	clk_sysbypck: clk_sysbypck {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <800000000>;
-		clock-output-names = "sysbypck";
-	};
-
-	/* external reference clock for MC. float in normal operation */
-	clk_mcbypck: clk_mcbypck {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <800000000>;
-		clock-output-names = "mcbypck";
-	};
-
-	 /* external clock signal rg1refck, supplied by the phy */
-	clk_rg1refck: clk_rg1refck {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "clk_rg1refck";
-	};
-
-	 /* external clock signal rg2refck, supplied by the phy */
-	clk_rg2refck: clk_rg2refck {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "clk_rg2refck";
-	};
-
-	clk_xin: clk_xin {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-output-names = "clk_xin";
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges = <0x0 0xf0000000 0x00900000>;
-
-		scu: scu@3fe000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x3fe000 0x1000>;
-		};
-
-		l2: cache-controller@3fc000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x3fc000 0x1000>;
-			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			cache-unified;
-			cache-level = <2>;
-			clocks = <&clk NPCM7XX_CLK_AXI>;
-			arm,shared-override;
-		};
-
-		gic: interrupt-controller@3ff000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x3ff000 0x1000>,
-				<0x3fe100 0x100>;
-		};
-
-		gcr: gcr@800000 {
-			compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd";
-			reg = <0x800000 0x1000>;
-		};
-
-		rst: rst@801000 {
-			compatible = "nuvoton,npcm750-rst", "syscon", "simple-mfd";
-			reg = <0x801000 0x6C>;
-		};
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		rstc: rstc@f0801000 {
-			compatible = "nuvoton,npcm750-reset";
-			reg = <0xf0801000 0x70>;
-			#reset-cells = <2>;
-			nuvoton,sysgcr = <&gcr>;
-		};
-
-		clk: clock-controller@f0801000 {
-			compatible = "nuvoton,npcm750-clk", "syscon";
-			#clock-cells = <1>;
-			clock-controller;
-			reg = <0xf0801000 0x1000>;
-			clock-names = "refclk", "sysbypck", "mcbypck";
-			clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
-		};
-
-		gmac0: eth@f0802000 {
-			device_type = "network";
-			compatible = "snps,dwmac";
-			reg = <0xf0802000 0x2000>;
-			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			ethernet = <0>;
-			clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
-			clock-names = "stmmaceth", "clk_gmac";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rg1_pins
-					&rg1mdio_pins>;
-			status = "disabled";
-		};
-
-		ehci1: usb@f0806000 {
-			compatible = "nuvoton,npcm750-ehci";
-			reg = <0xf0806000 0x1000>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		fiu0: spi@fb000000 {
-			compatible = "nuvoton,npcm750-fiu";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xfb000000 0x1000>;
-			reg-names = "control", "memory";
-			clocks = <&clk NPCM7XX_CLK_SPI0>;
-			clock-names = "clk_spi0";
-			status = "disabled";
-		};
-
-		fiu3: spi@c0000000 {
-			compatible = "nuvoton,npcm750-fiu";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xc0000000 0x1000>;
-			reg-names = "control", "memory";
-			clocks = <&clk NPCM7XX_CLK_SPI3>;
-			clock-names = "clk_spi3";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi3_pins>;
-			status = "disabled";
-		};
-
-		fiux: spi@fb001000 {
-			compatible = "nuvoton,npcm750-fiu";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xfb001000 0x1000>;
-			reg-names = "control", "memory";
-			clocks = <&clk NPCM7XX_CLK_SPIX>;
-			clock-names = "clk_spix";
-			status = "disabled";
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			interrupt-parent = <&gic>;
-			ranges = <0x0 0xf0000000 0x00300000>;
-
-			lpc_kcs: lpc_kcs@7000 {
-				compatible = "nuvoton,npcm750-lpc-kcs", "simple-mfd", "syscon";
-				reg = <0x7000 0x40>;
-				reg-io-width = <1>;
-
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x7000 0x40>;
-
-				kcs1: kcs1@0 {
-					compatible = "nuvoton,npcm750-kcs-bmc";
-					reg = <0x0 0x40>;
-					interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-					kcs_chan = <1>;
-					status = "disabled";
-				};
-
-				kcs2: kcs2@0 {
-					compatible = "nuvoton,npcm750-kcs-bmc";
-					reg = <0x0 0x40>;
-					interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-					kcs_chan = <2>;
-					status = "disabled";
-				};
-
-				kcs3: kcs3@0 {
-					compatible = "nuvoton,npcm750-kcs-bmc";
-					reg = <0x0 0x40>;
-					interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-					kcs_chan = <3>;
-					status = "disabled";
-				};
-			};
-
-			spi0: spi@200000 {
-				compatible = "nuvoton,npcm750-pspi";
-				reg = <0x200000 0x1000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pspi1_pins>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk NPCM7XX_CLK_APB5>;
-				clock-names = "clk_apb5";
-				resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
-				status = "disabled";
-			};
-
-			spi1: spi@201000 {
-				compatible = "nuvoton,npcm750-pspi";
-				reg = <0x201000 0x1000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pspi2_pins>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk NPCM7XX_CLK_APB5>;
-				clock-names = "clk_apb5";
-				resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI2>;
-				status = "disabled";
-			};
-
-			timer0: timer@8000 {
-				compatible = "nuvoton,npcm750-timer";
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x8000 0x1C>;
-				clocks = <&clk NPCM7XX_CLK_TIMER>;
-			};
-
-			watchdog0: watchdog@801C {
-				compatible = "nuvoton,npcm750-wdt";
-				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x801C 0x4>;
-				status = "disabled";
-				clocks = <&clk NPCM7XX_CLK_TIMER>;
-			};
-
-			watchdog1: watchdog@901C {
-				compatible = "nuvoton,npcm750-wdt";
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x901C 0x4>;
-				status = "disabled";
-				clocks = <&clk NPCM7XX_CLK_TIMER>;
-			};
-
-			watchdog2: watchdog@a01C {
-				compatible = "nuvoton,npcm750-wdt";
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xa01C 0x4>;
-				status = "disabled";
-				clocks = <&clk NPCM7XX_CLK_TIMER>;
-			};
-
-			serial0: serial@1000 {
-				compatible = "nuvoton,npcm750-uart";
-				reg = <0x1000 0x1000>;
-				clocks = <&clk NPCM7XX_CLK_UART>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			serial1: serial@2000 {
-				compatible = "nuvoton,npcm750-uart";
-				reg = <0x2000 0x1000>;
-				clocks = <&clk NPCM7XX_CLK_UART>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			serial2: serial@3000 {
-				compatible = "nuvoton,npcm750-uart";
-				reg = <0x3000 0x1000>;
-				clocks = <&clk NPCM7XX_CLK_UART>;
-				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			serial3: serial@4000 {
-				compatible = "nuvoton,npcm750-uart";
-				reg = <0x4000 0x1000>;
-				clocks = <&clk NPCM7XX_CLK_UART>;
-				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			rng: rng@b000 {
-				compatible = "nuvoton,npcm750-rng";
-				reg = <0xb000 0x8>;
-				status = "disabled";
-			};
-
-			adc: adc@c000 {
-				compatible = "nuvoton,npcm750-adc";
-				reg = <0xc000 0x8>;
-				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk NPCM7XX_CLK_ADC>;
-				resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>;
-				status = "disabled";
-			};
-
-			pwm_fan: pwm-fan-controller@103000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "nuvoton,npcm750-pwm-fan";
-				reg = <0x103000 0x2000>, <0x180000 0x8000>;
-				reg-names = "pwm", "fan";
-				clocks = <&clk NPCM7XX_CLK_APB3>,
-					<&clk NPCM7XX_CLK_APB4>;
-				clock-names = "pwm","fan";
-				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-						<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-						<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-						<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-						<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-						<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-						<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-						<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm0_pins &pwm1_pins
-						&pwm2_pins &pwm3_pins
-						&pwm4_pins &pwm5_pins
-						&pwm6_pins &pwm7_pins
-						&fanin0_pins &fanin1_pins
-						&fanin2_pins &fanin3_pins
-						&fanin4_pins &fanin5_pins
-						&fanin6_pins &fanin7_pins
-						&fanin8_pins &fanin9_pins
-						&fanin10_pins &fanin11_pins
-						&fanin12_pins &fanin13_pins
-						&fanin14_pins &fanin15_pins>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@80000 {
-				reg = <0x80000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb0_pins>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@81000 {
-				reg = <0x81000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb1_pins>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@82000 {
-				reg = <0x82000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb2_pins>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@83000 {
-				reg = <0x83000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb3_pins>;
-				status = "disabled";
-			};
-
-			i2c4: i2c@84000 {
-				reg = <0x84000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb4_pins>;
-				status = "disabled";
-			};
-
-			i2c5: i2c@85000 {
-				reg = <0x85000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb5_pins>;
-				status = "disabled";
-			};
-
-			i2c6: i2c@86000 {
-				reg = <0x86000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb6_pins>;
-				status = "disabled";
-			};
-
-			i2c7: i2c@87000 {
-				reg = <0x87000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb7_pins>;
-				status = "disabled";
-			};
-
-			i2c8: i2c@88000 {
-				reg = <0x88000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb8_pins>;
-				status = "disabled";
-			};
-
-			i2c9: i2c@89000 {
-				reg = <0x89000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb9_pins>;
-				status = "disabled";
-			};
-
-			i2c10: i2c@8a000 {
-				reg = <0x8a000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb10_pins>;
-				status = "disabled";
-			};
-
-			i2c11: i2c@8b000 {
-				reg = <0x8b000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb11_pins>;
-				status = "disabled";
-			};
-
-			i2c12: i2c@8c000 {
-				reg = <0x8c000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb12_pins>;
-				status = "disabled";
-			};
-
-			i2c13: i2c@8d000 {
-				reg = <0x8d000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb13_pins>;
-				status = "disabled";
-			};
-
-			i2c14: i2c@8e000 {
-				reg = <0x8e000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb14_pins>;
-				status = "disabled";
-			};
-
-			i2c15: i2c@8f000 {
-				reg = <0x8f000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk NPCM7XX_CLK_APB2>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&smb15_pins>;
-				status = "disabled";
-			};
-		};
-	};
-
-	pinctrl: pinctrl@f0800000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "nuvoton,npcm750-pinctrl", "syscon", "simple-mfd";
-		ranges = <0 0xf0010000 0x8000>;
-		gpio0: gpio@f0010000 {
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0x0 0x80>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&pinctrl 0 0 32>;
-		};
-		gpio1: gpio@f0011000 {
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0x1000 0x80>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&pinctrl 0 32 32>;
-		};
-		gpio2: gpio@f0012000 {
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0x2000 0x80>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&pinctrl 0 64 32>;
-		};
-		gpio3: gpio@f0013000 {
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0x3000 0x80>;
-			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&pinctrl 0 96 32>;
-		};
-		gpio4: gpio@f0014000 {
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0x4000 0x80>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&pinctrl 0 128 32>;
-		};
-		gpio5: gpio@f0015000 {
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0x5000 0x80>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&pinctrl 0 160 32>;
-		};
-		gpio6: gpio@f0016000 {
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0x6000 0x80>;
-			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&pinctrl 0 192 32>;
-		};
-		gpio7: gpio@f0017000 {
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0x7000 0x80>;
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&pinctrl 0 224 32>;
-		};
-
-		iox1_pins: iox1-pins {
-			groups = "iox1";
-			function = "iox1";
-		};
-		iox2_pins: iox2-pins {
-			groups = "iox2";
-			function = "iox2";
-		};
-		smb1d_pins: smb1d-pins {
-			groups = "smb1d";
-			function = "smb1d";
-		};
-		smb2d_pins: smb2d-pins {
-			groups = "smb2d";
-			function = "smb2d";
-		};
-		lkgpo1_pins: lkgpo1-pins {
-			groups = "lkgpo1";
-			function = "lkgpo1";
-		};
-		lkgpo2_pins: lkgpo2-pins {
-			groups = "lkgpo2";
-			function = "lkgpo2";
-		};
-		ioxh_pins: ioxh-pins {
-			groups = "ioxh";
-			function = "ioxh";
-		};
-		gspi_pins: gspi-pins {
-			groups = "gspi";
-			function = "gspi";
-		};
-		smb5b_pins: smb5b-pins {
-			groups = "smb5b";
-			function = "smb5b";
-		};
-		smb5c_pins: smb5c-pins {
-			groups = "smb5c";
-			function = "smb5c";
-		};
-		lkgpo0_pins: lkgpo0-pins {
-			groups = "lkgpo0";
-			function = "lkgpo0";
-		};
-		pspi2_pins: pspi2-pins {
-			groups = "pspi2";
-			function = "pspi2";
-		};
-		smb4den_pins: smb4den-pins {
-			groups = "smb4den";
-			function = "smb4den";
-		};
-		smb4b_pins: smb4b-pins {
-			groups = "smb4b";
-			function = "smb4b";
-		};
-		smb4c_pins: smb4c-pins {
-			groups = "smb4c";
-			function = "smb4c";
-		};
-		smb15_pins: smb15-pins {
-			groups = "smb15";
-			function = "smb15";
-		};
-		smb4d_pins: smb4d-pins {
-			groups = "smb4d";
-			function = "smb4d";
-		};
-		smb14_pins: smb14-pins {
-			groups = "smb14";
-			function = "smb14";
-		};
-		smb5_pins: smb5-pins {
-			groups = "smb5";
-			function = "smb5";
-		};
-		smb4_pins: smb4-pins {
-			groups = "smb4";
-			function = "smb4";
-		};
-		smb3_pins: smb3-pins {
-			groups = "smb3";
-			function = "smb3";
-		};
-		spi0cs1_pins: spi0cs1-pins {
-			groups = "spi0cs1";
-			function = "spi0cs1";
-		};
-		spi0cs2_pins: spi0cs2-pins {
-			groups = "spi0cs2";
-			function = "spi0cs2";
-		};
-		spi0cs3_pins: spi0cs3-pins {
-			groups = "spi0cs3";
-			function = "spi0cs3";
-		};
-		smb3c_pins: smb3c-pins {
-			groups = "smb3c";
-			function = "smb3c";
-		};
-		smb3b_pins: smb3b-pins {
-			groups = "smb3b";
-			function = "smb3b";
-		};
-		bmcuart0a_pins: bmcuart0a-pins {
-			groups = "bmcuart0a";
-			function = "bmcuart0a";
-		};
-		uart1_pins: uart1-pins {
-			groups = "uart1";
-			function = "uart1";
-		};
-		jtag2_pins: jtag2-pins {
-			groups = "jtag2";
-			function = "jtag2";
-		};
-		bmcuart1_pins: bmcuart1-pins {
-			groups = "bmcuart1";
-			function = "bmcuart1";
-		};
-		uart2_pins: uart2-pins {
-			groups = "uart2";
-			function = "uart2";
-		};
-		bmcuart0b_pins: bmcuart0b-pins {
-			groups = "bmcuart0b";
-			function = "bmcuart0b";
-		};
-		r1err_pins: r1err-pins {
-			groups = "r1err";
-			function = "r1err";
-		};
-		r1md_pins: r1md-pins {
-			groups = "r1md";
-			function = "r1md";
-		};
-		smb3d_pins: smb3d-pins {
-			groups = "smb3d";
-			function = "smb3d";
-		};
-		fanin0_pins: fanin0-pins {
-			groups = "fanin0";
-			function = "fanin0";
-		};
-		fanin1_pins: fanin1-pins {
-			groups = "fanin1";
-			function = "fanin1";
-		};
-		fanin2_pins: fanin2-pins {
-			groups = "fanin2";
-			function = "fanin2";
-		};
-		fanin3_pins: fanin3-pins {
-			groups = "fanin3";
-			function = "fanin3";
-		};
-		fanin4_pins: fanin4-pins {
-			groups = "fanin4";
-			function = "fanin4";
-		};
-		fanin5_pins: fanin5-pins {
-			groups = "fanin5";
-			function = "fanin5";
-		};
-		fanin6_pins: fanin6-pins {
-			groups = "fanin6";
-			function = "fanin6";
-		};
-		fanin7_pins: fanin7-pins {
-			groups = "fanin7";
-			function = "fanin7";
-		};
-		fanin8_pins: fanin8-pins {
-			groups = "fanin8";
-			function = "fanin8";
-		};
-		fanin9_pins: fanin9-pins {
-			groups = "fanin9";
-			function = "fanin9";
-		};
-		fanin10_pins: fanin10-pins {
-			groups = "fanin10";
-			function = "fanin10";
-		};
-		fanin11_pins: fanin11-pins {
-			groups = "fanin11";
-			function = "fanin11";
-		};
-		fanin12_pins: fanin12-pins {
-			groups = "fanin12";
-			function = "fanin12";
-		};
-		fanin13_pins: fanin13-pins {
-			groups = "fanin13";
-			function = "fanin13";
-		};
-		fanin14_pins: fanin14-pins {
-			groups = "fanin14";
-			function = "fanin14";
-		};
-		fanin15_pins: fanin15-pins {
-			groups = "fanin15";
-			function = "fanin15";
-		};
-		pwm0_pins: pwm0-pins {
-			groups = "pwm0";
-			function = "pwm0";
-		};
-		pwm1_pins: pwm1-pins {
-			groups = "pwm1";
-			function = "pwm1";
-		};
-		pwm2_pins: pwm2-pins {
-			groups = "pwm2";
-			function = "pwm2";
-		};
-		pwm3_pins: pwm3-pins {
-			groups = "pwm3";
-			function = "pwm3";
-		};
-		r2_pins: r2-pins {
-			groups = "r2";
-			function = "r2";
-		};
-		r2err_pins: r2err-pins {
-			groups = "r2err";
-			function = "r2err";
-		};
-		r2md_pins: r2md-pins {
-			groups = "r2md";
-			function = "r2md";
-		};
-		ga20kbc_pins: ga20kbc-pins {
-			groups = "ga20kbc";
-			function = "ga20kbc";
-		};
-		smb5d_pins: smb5d-pins {
-			groups = "smb5d";
-			function = "smb5d";
-		};
-		lpc_pins: lpc-pins {
-			groups = "lpc";
-			function = "lpc";
-		};
-		espi_pins: espi-pins {
-			groups = "espi";
-			function = "espi";
-		};
-		rg1_pins: rg1-pins {
-			groups = "rg1";
-			function = "rg1";
-		};
-		rg1mdio_pins: rg1mdio-pins {
-			groups = "rg1mdio";
-			function = "rg1mdio";
-		};
-		rg2_pins: rg2-pins {
-			groups = "rg2";
-			function = "rg2";
-		};
-		ddr_pins: ddr-pins {
-			groups = "ddr";
-			function = "ddr";
-		};
-		smb0_pins: smb0-pins {
-			groups = "smb0";
-			function = "smb0";
-		};
-		smb1_pins: smb1-pins {
-			groups = "smb1";
-			function = "smb1";
-		};
-		smb2_pins: smb2-pins {
-			groups = "smb2";
-			function = "smb2";
-		};
-		smb2c_pins: smb2c-pins {
-			groups = "smb2c";
-			function = "smb2c";
-		};
-		smb2b_pins: smb2b-pins {
-			groups = "smb2b";
-			function = "smb2b";
-		};
-		smb1c_pins: smb1c-pins {
-			groups = "smb1c";
-			function = "smb1c";
-		};
-		smb1b_pins: smb1b-pins {
-			groups = "smb1b";
-			function = "smb1b";
-		};
-		smb8_pins: smb8-pins {
-			groups = "smb8";
-			function = "smb8";
-		};
-		smb9_pins: smb9-pins {
-			groups = "smb9";
-			function = "smb9";
-		};
-		smb10_pins: smb10-pins {
-			groups = "smb10";
-			function = "smb10";
-		};
-		smb11_pins: smb11-pins {
-			groups = "smb11";
-			function = "smb11";
-		};
-		sd1_pins: sd1-pins {
-			groups = "sd1";
-			function = "sd1";
-		};
-		sd1pwr_pins: sd1pwr-pins {
-			groups = "sd1pwr";
-			function = "sd1pwr";
-		};
-		pwm4_pins: pwm4-pins {
-			groups = "pwm4";
-			function = "pwm4";
-		};
-		pwm5_pins: pwm5-pins {
-			groups = "pwm5";
-			function = "pwm5";
-		};
-		pwm6_pins: pwm6-pins {
-			groups = "pwm6";
-			function = "pwm6";
-		};
-		pwm7_pins: pwm7-pins {
-			groups = "pwm7";
-			function = "pwm7";
-		};
-		mmc8_pins: mmc8-pins {
-			groups = "mmc8";
-			function = "mmc8";
-		};
-		mmc_pins: mmc-pins {
-			groups = "mmc";
-			function = "mmc";
-		};
-		mmcwp_pins: mmcwp-pins {
-			groups = "mmcwp";
-			function = "mmcwp";
-		};
-		mmccd_pins: mmccd-pins {
-			groups = "mmccd";
-			function = "mmccd";
-		};
-		mmcrst_pins: mmcrst-pins {
-			groups = "mmcrst";
-			function = "mmcrst";
-		};
-		clkout_pins: clkout-pins {
-			groups = "clkout";
-			function = "clkout";
-		};
-		serirq_pins: serirq-pins {
-			groups = "serirq";
-			function = "serirq";
-		};
-		lpcclk_pins: lpcclk-pins {
-			groups = "lpcclk";
-			function = "lpcclk";
-		};
-		scipme_pins: scipme-pins {
-			groups = "scipme";
-			function = "scipme";
-		};
-		sci_pins: sci-pins {
-			groups = "sci";
-			function = "sci";
-		};
-		smb6_pins: smb6-pins {
-			groups = "smb6";
-			function = "smb6";
-		};
-		smb7_pins: smb7-pins {
-			groups = "smb7";
-			function = "smb7";
-		};
-		pspi1_pins: pspi1-pins {
-			groups = "pspi1";
-			function = "pspi1";
-		};
-		faninx_pins: faninx-pins {
-			groups = "faninx";
-			function = "faninx";
-		};
-		r1_pins: r1-pins {
-			groups = "r1";
-			function = "r1";
-		};
-		spi3_pins: spi3-pins {
-			groups = "spi3";
-			function = "spi3";
-		};
-		spi3cs1_pins: spi3cs1-pins {
-			groups = "spi3cs1";
-			function = "spi3cs1";
-		};
-		spi3quad_pins: spi3quad-pins {
-			groups = "spi3quad";
-			function = "spi3quad";
-		};
-		spi3cs2_pins: spi3cs2-pins {
-			groups = "spi3cs2";
-			function = "spi3cs2";
-		};
-		spi3cs3_pins: spi3cs3-pins {
-			groups = "spi3cs3";
-			function = "spi3cs3";
-		};
-		nprd_smi_pins: nprd-smi-pins {
-			groups = "nprd_smi";
-			function = "nprd_smi";
-		};
-		smb0b_pins: smb0b-pins {
-			groups = "smb0b";
-			function = "smb0b";
-		};
-		smb0c_pins: smb0c-pins {
-			groups = "smb0c";
-			function = "smb0c";
-		};
-		smb0den_pins: smb0den-pins {
-			groups = "smb0den";
-			function = "smb0den";
-		};
-		smb0d_pins: smb0d-pins {
-			groups = "smb0d";
-			function = "smb0d";
-		};
-		ddc_pins: ddc-pins {
-			groups = "ddc";
-			function = "ddc";
-		};
-		rg2mdio_pins: rg2mdio-pins {
-			groups = "rg2mdio";
-			function = "rg2mdio";
-		};
-		wdog1_pins: wdog1-pins {
-			groups = "wdog1";
-			function = "wdog1";
-		};
-		wdog2_pins: wdog2-pins {
-			groups = "wdog2";
-			function = "wdog2";
-		};
-		smb12_pins: smb12-pins {
-			groups = "smb12";
-			function = "smb12";
-		};
-		smb13_pins: smb13-pins {
-			groups = "smb13";
-			function = "smb13";
-		};
-		spix_pins: spix-pins {
-			groups = "spix";
-			function = "spix";
-		};
-		spixcs1_pins: spixcs1-pins {
-			groups = "spixcs1";
-			function = "spixcs1";
-		};
-		clkreq_pins: clkreq-pins {
-			groups = "clkreq";
-			function = "clkreq";
-		};
-		hgpio0_pins: hgpio0-pins {
-			groups = "hgpio0";
-			function = "hgpio0";
-		};
-		hgpio1_pins: hgpio1-pins {
-			groups = "hgpio1";
-			function = "hgpio1";
-		};
-		hgpio2_pins: hgpio2-pins {
-			groups = "hgpio2";
-			function = "hgpio2";
-		};
-		hgpio3_pins: hgpio3-pins {
-			groups = "hgpio3";
-			function = "hgpio3";
-		};
-		hgpio4_pins: hgpio4-pins {
-			groups = "hgpio4";
-			function = "hgpio4";
-		};
-		hgpio5_pins: hgpio5-pins {
-			groups = "hgpio5";
-			function = "hgpio5";
-		};
-		hgpio6_pins: hgpio6-pins {
-			groups = "hgpio6";
-			function = "hgpio6";
-		};
-		hgpio7_pins: hgpio7-pins {
-			groups = "hgpio7";
-			function = "hgpio7";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
deleted file mode 100644
index 9e9eba8bad5e4..0000000000000
--- a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
+++ /dev/null
@@ -1,1135 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2020 Quanta Computer Inc. George.Hung@quantatw.com
-
-/dts-v1/;
-#include "nuvoton-npcm730.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Quanta GBS Board (Device Tree)";
-	compatible = "quanta,gbs-bmc","nuvoton,npcm730";
-
-	aliases {
-		ethernet1 = &gmac0;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		i2c8 = &i2c8;
-		i2c9 = &i2c9;
-		i2c10 = &i2c10;
-		i2c11 = &i2c11;
-		i2c12 = &i2c12;
-		i2c13 = &i2c13;
-		i2c14 = &i2c14;
-		i2c15 = &i2c15;
-		i2c16 = &i2c0_slotPE0_0;
-		i2c17 = &i2c0_slotPE1_1;
-		i2c18 = &i2c0_slotUSB_2;
-		i2c19 = &i2c0_3;
-		i2c20 = &i2c5_i2cool_0;
-		i2c21 = &i2c5_i2cool_1;
-		i2c22 = &i2c5_i2cool_2;
-		i2c23 = &i2c5_hsbp_fru_3;
-		i2c24 = &i2c6_u2_15_0;
-		i2c25 = &i2c6_u2_14_1;
-		i2c26 = &i2c6_u2_13_2;
-		i2c27 = &i2c6_u2_12_3;
-		i2c28 = &i2c7_u2_11_0;
-		i2c29 = &i2c7_u2_10_1;
-		i2c30 = &i2c7_u2_9_2;
-		i2c31 = &i2c7_u2_8_3;
-		i2c32 = &i2c9_vddcr_cpu;
-		i2c33 = &i2c9_vddcr_soc;
-		i2c34 = &i2c9_vddio_efgh;
-		i2c35 = &i2c9_vddio_abcd;
-		i2c36 = &i2c10_u2_7_0;
-		i2c37 = &i2c10_u2_6_1;
-		i2c38 = &i2c10_u2_5_2;
-		i2c39 = &i2c10_u2_4_3;
-		i2c40 = &i2c11_clk_buf0_0;
-		i2c41 = &i2c11_clk_buf1_1;
-		i2c42 = &i2c11_clk_buf2_2;
-		i2c43 = &i2c11_clk_buf3_3;
-		i2c44 = &i2c14_u2_3_0;
-		i2c45 = &i2c14_u2_2_1;
-		i2c46 = &i2c14_u2_1_2;
-		i2c47 = &i2c14_u2_0_3;
-		fiu0 = &fiu0;
-		fiu1 = &fiu3;
-	};
-
-	chosen {
-		stdout-path = &serial0;
-	};
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		sas-cable0 {
-			label = "sas-cable0";
-			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
-			linux,code = <73>;
-		};
-
-		sas-cable1 {
-			label = "sas-cable1";
-			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-			linux,code = <72>;
-		};
-
-		sas-cable2 {
-			label = "sas-cable2";
-			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <71>;
-		};
-
-		sas-cable3 {
-			label = "sas-cable3";
-			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-			linux,code = <70>;
-		};
-
-		sata0 {
-			label = "sata0";
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <5>;
-		};
-
-		hsbp-cable {
-			label = "hsbp-cable";
-			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			linux,code = <57>;
-		};
-
-		fanbd-cable {
-			label = "fanbd-cable";
-			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			linux,code = <58>;
-		};
-
-		bp12v-cable {
-			label = "bp12v-cable";
-			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-			linux,code = <69>;
-		};
-
-		pe-slot0 {
-			label = "pe-slot0";
-			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-			linux,code = <120>;
-		};
-
-		pe-slot1 {
-			label = "pe-slot1";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-			linux,code = <121>;
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 1>, <&adc 2>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat { /* gpio153 */
-			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		attention { /* gpio215 */
-			gpios = <&gpio6 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		sys_boot_status { /* gpio216 */
-			gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			retain-state-shutdown;
-		};
-
-		bmc_fault { /* gpio217 */
-			gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "panic";
-			panic-indicator;
-		};
-
-		led_u2_0_locate {
-			gpios = <&pca9535_ledlocate 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_1_locate {
-			gpios = <&pca9535_ledlocate 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_2_locate {
-			gpios = <&pca9535_ledlocate 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_3_locate {
-			gpios = <&pca9535_ledlocate 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_4_locate {
-			gpios = <&pca9535_ledlocate 7 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_5_locate {
-			gpios = <&pca9535_ledlocate 6 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_6_locate {
-			gpios = <&pca9535_ledlocate 5 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_7_locate {
-			gpios = <&pca9535_ledlocate 4 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_8_locate {
-			gpios = <&pca9535_ledlocate 11 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_9_locate {
-			gpios = <&pca9535_ledlocate 10 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_10_locate {
-			gpios = <&pca9535_ledlocate 9 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_11_locate {
-			gpios = <&pca9535_ledlocate 8 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_12_locate {
-			gpios = <&pca9535_ledlocate 15 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_13_locate {
-			gpios = <&pca9535_ledlocate 14 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_14_locate {
-			gpios = <&pca9535_ledlocate 13 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_15_locate {
-			gpios = <&pca9535_ledlocate 12 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_0_fault {
-			gpios = <&pca9535_ledfault 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_1_fault {
-			gpios = <&pca9535_ledfault 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_2_fault {
-			gpios = <&pca9535_ledfault 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_3_fault {
-			gpios = <&pca9535_ledfault 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_4_fault {
-			gpios = <&pca9535_ledfault 7 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_5_fault {
-			gpios = <&pca9535_ledfault 6 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_6_fault {
-			gpios = <&pca9535_ledfault 5 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_7_fault {
-			gpios = <&pca9535_ledfault 4 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_8_fault {
-			gpios = <&pca9535_ledfault 11 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_9_fault {
-			gpios = <&pca9535_ledfault 10 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_10_fault {
-			gpios = <&pca9535_ledfault 9 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_11_fault {
-			gpios = <&pca9535_ledfault 8 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_12_fault {
-			gpios = <&pca9535_ledfault 15 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_13_fault {
-			gpios = <&pca9535_ledfault 14 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_14_fault {
-			gpios = <&pca9535_ledfault 13 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_u2_15_fault {
-			gpios = <&pca9535_ledfault 12 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-	};
-
-	seven-seg-disp {
-		compatible = "seven-seg-gpio-dev";
-		refresh-interval-ms = /bits/ 16 <600>;
-		clock-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-		data-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-		clear-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	pcie-slot {
-		pcie1: pcie-slot@1 {
-			label = "PE0";
-		};
-		pcie2: pcie-slot@2 {
-			label = "PE1";
-		};
-	};
-};
-
-&fiu0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0cs1_pins>;
-	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		spi-rx-bus-width = <2>;
-		label = "bmc";
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			u-boot@0 {
-				label = "u-boot";
-				reg = <0x0000000 0xf0000>;
-			};
-			image-descriptor@f0000 {
-				label = "image-descriptor";
-				reg = <0xf0000 0x10000>;
-			};
-			hoth-update@100000 {
-				label = "hoth-update";
-				reg = <0x100000 0x100000>;
-			};
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x200000 0x500000>;
-			};
-			rofs@700000 {
-				label = "rofs";
-				reg = <0x700000 0x35f0000>;
-			};
-			rwfs@3cf0000 {
-				label = "rwfs";
-				reg = <0x3cf0000 0x300000>;
-			};
-			hoth-mailbox@3ff0000 {
-				label = "hoth-mailbox";
-				reg = <0x3ff0000 0x10000>;
-			};
-		};
-	};
-};
-
-&fiu3 {
-	pinctrl-0 = <&spi3_pins>, <&spi3cs1_pins>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		spi-rx-bus-width = <2>;
-		m25p,fast-read;
-		label = "pnor";
-	};
-	flash@1 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <1>;
-		spi-max-frequency = <50000000>;
-		spi-rx-bus-width = <2>;
-		m25p,fast-read;
-	};
-};
-
-&gcr {
-	serial_port_mux: uart-mux-controller {
-		compatible = "mmio-mux";
-		#mux-control-cells = <1>;
-		mux-reg-masks = <0x38 0x07>;
-		idle-states = <2>; /* Serial port mode 3 (takeover) */
-	};
-
-	uart1_mode_mux: uart1-mode-mux-controller {
-		compatible = "mmio-mux";
-		#mux-control-cells = <1>;
-		mux-reg-masks = <0x64 0x01000000>;
-		idle-states = <0>; /* Set UART1 mode to normal (follow SPMOD) */
-	};
-};
-
-&gmac0 {
-	status = "okay";
-	phy-mode = "rgmii-id";
-	snps,eee-force-disable;
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&watchdog1 {
-	status = "okay";
-};
-
-&rng {
-	status = "okay";
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&serial3 {
-	status = "okay";
-};
-
-&adc {
-	#io-channel-cells = <1>;
-	status = "okay";
-};
-
-&lpc_kcs {
-	kcs1: kcs1@0 {
-		status = "okay";
-	};
-
-	kcs2: kcs2@0 {
-		status = "okay";
-	};
-
-	kcs3: kcs3@0 {
-		status = "okay";
-	};
-};
-
-&spi1 {
-	cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; /* dummy - gpio147 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio224ol_pins &gpio227o_pins
-			&gpio228_pins>;
-	status = "okay";
-
-	jtag_master@0 {
-		compatible = "nuvoton,npcm750-jtag-master";
-		spi-max-frequency = <25000000>;
-		reg = <0>;
-		status = "okay";
-
-		pinctrl-names = "pspi", "gpio";
-		pinctrl-0 = <&pspi2_pins>;
-		pinctrl-1 = <&gpio224ol_pins &gpio227o_pins
-				&gpio228_pins>;
-
-		tck-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-		tdi-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
-		tdo-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
-		tms-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9546";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-		i2c-mux-idle-disconnect;
-		reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
-
-		i2c0_slotPE0_0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			pcie-slot = &pcie1;
-		};
-
-		i2c0_slotPE1_1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			pcie-slot = &pcie2;
-		};
-
-		i2c0_slotUSB_2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c0_3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pca9535_ifdet: pca9535-ifdet@24 {
-		compatible = "nxp,pca9535";
-		reg = <0x24>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	pca9535_pwren: pca9535-pwren@20 {
-		compatible = "nxp,pca9535";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"pwr_u2_3_en","pwr_u2_2_en",
-			"pwr_u2_1_en","pwr_u2_0_en",
-			"pwr_u2_7_en","pwr_u2_6_en",
-			"pwr_u2_5_en","pwr_u2_4_en",
-			"pwr_u2_11_en","pwr_u2_10_en",
-			"pwr_u2_9_en","pwr_u2_8_en",
-			"pwr_u2_15_en","pwr_u2_14_en",
-			"pwr_u2_13_en","pwr_u2_12_en";
-	};
-
-	pca9535_pwrgd: pca9535-pwrgd@21 {
-		compatible = "nxp,pca9535";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	pca9535_ledlocate: pca9535-ledlocate@22 {
-		compatible = "nxp,pca9535";
-		reg = <0x22>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-	};
-
-	pca9535_ledfault: pca9535-ledfault@23 {
-		compatible = "nxp,pca9535";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-	};
-
-	pca9535_pwrdisable: pca9535-pwrdisable@25 {
-		compatible = "nxp,pca9535";
-		reg = <0x25>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"u2_3_pwr_dis","u2_2_pwr_dis",
-			"u2_1_pwr_dis","u2_0_pwr_dis",
-			"u2_7_pwr_dis","u2_6_pwr_dis",
-			"u2_5_pwr_dis","u2_4_pwr_dis",
-			"u2_11_pwr_dis","u2_10_pwr_dis",
-			"u2_9_pwr_dis","u2_8_pwr_dis",
-			"u2_15_pwr_dis","u2_14_pwr_dis",
-			"u2_13_pwr_dis","u2_12_pwr_dis";
-	};
-
-	pca9535_perst: pca9535-perst@26 {
-		compatible = "nxp,pca9535";
-		reg = <0x26>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"u2_15_perst","u2_14_perst",
-			"u2_13_perst","u2_12_perst",
-			"u2_11_perst","u2_10_perst",
-			"u2_9_perst","u2_8_perst",
-			"u2_7_perst","u2_6_perst",
-			"u2_5_perst","u2_4_perst",
-			"u2_3_perst","u2_2_perst",
-			"u2_1_perst","u2_0_perst";
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	sbtsi@4c {
-		compatible = "amd,sbtsi";
-		reg = <0x4c>;
-	};
-};
-
-&i2c5 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	mb_fru@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9546";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-		i2c-mux-idle-disconnect;
-
-		i2c5_i2cool_0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			max31725@54 {
-				compatible = "maxim,max31725";
-				reg = <0x54>;
-				status = "okay";
-			};
-		};
-
-		i2c5_i2cool_1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			max31725@55 {
-				compatible = "maxim,max31725";
-				reg = <0x55>;
-				status = "okay";
-			};
-		};
-
-		i2c5_i2cool_2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			max31725@5d {
-				compatible = "maxim,max31725";
-				reg = <0x5d>;
-				status = "okay";
-			};
-			fan_fru@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-		};
-
-		i2c5_hsbp_fru_3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			hsbp_fru@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-				status = "okay";
-			};
-		};
-	};
-};
-
-&i2c6 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	i2c-switch@73 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x73>;
-		i2c-mux-idle-disconnect;
-
-		i2c6_u2_15_0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c6_u2_14_1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-		i2c6_u2_13_2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c6_u2_12_3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c7 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	i2c-switch@72 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x72>;
-		i2c-mux-idle-disconnect;
-
-		i2c7_u2_11_0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c7_u2_10_1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-		i2c7_u2_9_2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c7_u2_8_3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c8 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	i2c8_adm1272: adm1272@10 {
-		compatible = "adi,adm1272";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10>;
-		shunt-resistor-micro-ohms = <300>;
-	};
-};
-
-&i2c9 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9546";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-		i2c-mux-idle-disconnect;
-		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-
-		i2c9_vddcr_cpu: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			vrm@60 {
-				compatible = "isil,isl68137";
-				reg = <0x60>;
-			};
-		};
-
-		i2c9_vddcr_soc: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			vrm@61 {
-				compatible = "isil,isl68137";
-				reg = <0x61>;
-			};
-		};
-
-		i2c9_vddio_efgh: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			vrm@63 {
-				compatible = "isil,isl68137";
-				reg = <0x63>;
-			};
-		};
-
-		i2c9_vddio_abcd: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			vrm@45 {
-				compatible = "isil,isl68137";
-				reg = <0x45>;
-			};
-		};
-	};
-};
-
-&i2c10 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-		i2c-mux-idle-disconnect;
-
-		i2c10_u2_7_0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c10_u2_6_1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-		i2c10_u2_5_2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c10_u2_4_3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c11 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	i2c-switch@76 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x76>;
-		i2c-mux-idle-disconnect;
-
-		i2c11_clk_buf0_0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c11_clk_buf1_1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-		i2c11_clk_buf2_2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c11_clk_buf3_3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c12 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	max34451@4e {
-		compatible = "maxim,max34451";
-		reg = <0x4e>;
-	};
-	vrm@5d {
-		compatible = "isil,isl68137";
-		reg = <0x5d>;
-	};
-	vrm@5e {
-		compatible = "isil,isl68137";
-		reg = <0x5e>;
-	};
-};
-
-&i2c13 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c14 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		i2c14_u2_3_0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c14_u2_2_1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c14_u2_1_2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c14_u2_0_3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&pwm_fan {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pwm0_pins &pwm1_pins
-		&pwm2_pins &pwm3_pins
-		&pwm4_pins
-		&fanin0_pins &fanin1_pins
-		&fanin2_pins &fanin3_pins
-		&fanin4_pins
-	>;
-	status = "okay";
-
-	fan@0 {
-		reg = <0x00>;
-		fan-tach-ch = /bits/ 8 <0x00>;
-	};
-	fan@1 {
-		reg = <0x01>;
-		fan-tach-ch = /bits/ 8 <0x01>;
-	};
-	fan@2 {
-		reg = <0x02>;
-		fan-tach-ch = /bits/ 8 <0x02>;
-	};
-	fan@3 {
-		reg = <0x04>;
-		fan-tach-ch = /bits/ 8 <0x04>;
-	};
-	fan@4 {
-		reg = <0x03>;
-		fan-tach-ch = /bits/ 8 <0x03>;
-	};
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-
-	gpio0: gpio@f0010000 {
-		/* POWER_OUT=gpio07, RESET_OUT=gpio06, PS_PWROK=gpio13 */
-		gpio-line-names =
-		/*0-31*/
-		"","","","","","","RESET_OUT","POWER_OUT",
-		"","","","","","PS_PWROK","","",
-		"","","","","","","","",
-		"","","","","","","","";
-	};
-	gpio1: gpio@f0011000 {
-		/* SIO_POWER_GOOD=gpio59 */
-		gpio-line-names =
-		/*32-63*/
-		"","","","","","","","",
-		"","","","","","","","",
-		"","","","","","","","",
-		"","","","SIO_POWER_GOOD","","","","";
-	};
-	gpio2: gpio@f0012000 {
-		bmc_usb_mux_oe_n {
-			gpio-hog;
-			gpios = <25 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "bmc-usb-mux-oe-n";
-		};
-		bmc_usb_mux_sel {
-			gpio-hog;
-			gpios = <26 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "bmc-usb-mux-sel";
-		};
-		bmc_usb2517_reset_n {
-			gpio-hog;
-			gpios = <27 GPIO_ACTIVE_LOW>;
-			output-low;
-			line-name = "bmc-usb2517-reset-n";
-		};
-	};
-	gpio3: gpio@f0013000 {
-		assert_cpu0_reset {
-			gpio-hog;
-			gpios = <14 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "assert-cpu0-reset";
-		};
-		assert_pwrok_cpu0_n {
-			gpio-hog;
-			gpios = <15 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "assert-pwrok-cpu0-n";
-		};
-		assert_cpu0_prochot {
-			gpio-hog;
-			gpios = <16 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "assert-cpu0-prochot";
-		};
-	};
-	gpio4: gpio@f0014000 {
-		/* POST_COMPLETE=gpio143 */
-		gpio-line-names =
-			/*128-159*/
-			"","","","","","","","",
-			"","","","","","","","POST_COMPLETE",
-			"","","","","","","","",
-			"","","","","","","","";
-	};
-	gpio5: gpio@f0015000 {
-		/* POWER_BUTTON=gpio177 */
-		gpio-line-names =
-			/*160-191*/
-			"","","","","","","","",
-			"","","","","","","","",
-			"","POWER_BUTTON","","","","","","",
-			"","","","","","","","";
-	};
-	gpio6: gpio@f0016000 {
-		/* SIO_S5=gpio199, RESET_BUTTON=gpio203 */
-		gpio-line-names =
-			/*192-223*/
-			"","","","","","","","SIO_S5",
-			"","","","RESET_BUTTON","","","","",
-			"","","","","","","","",
-			"","","","","","","","";
-	};
-
-	gpio224ol_pins: gpio224ol-pins {
-		pins = "GPIO224/SPIXCK";
-		bias-disable;
-		output-low;
-	};
-	gpio227o_pins: gpio227o-pins {
-		pins = "GPIO227/nSPIXCS0";
-		bias-disable;
-		output-high;
-	};
-	gpio228_pins: gpio228-pins {
-		pins = "GPIO228/nSPIXCS1";
-		bias-disable;
-		input-enable;
-	};
-};
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj-gpio.dtsi b/arch/arm/boot/dts/nuvoton-npcm730-gsj-gpio.dtsi
deleted file mode 100644
index 53cfd15fa03f5..0000000000000
--- a/arch/arm/boot/dts/nuvoton-npcm730-gsj-gpio.dtsi
+++ /dev/null
@@ -1,477 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
-
-/ {
-	pinctrl: pinctrl@f0800000 {
-		gpio0pp_pins: gpio0pp-pins {
-			pins = "GPIO0/IOX1DI";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio1pp_pins: gpio1pp-pins {
-			pins = "GPIO1/IOX1LD";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio2pp_pins: gpio2pp-pins {
-			pins = "GPIO2/IOX1CK";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio3pp_pins: gpio3pp-pins {
-			pins = "GPIO3/IOX1D0";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio4pp_pins: gpio4pp-pins {
-			pins = "GPIO4/IOX2DI/SMB1DSDA";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio5pp_pins: gpio5pp-pins {
-			pins = "GPIO5/IOX2LD/SMB1DSCL";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio6pp_pins: gpio6pp-pins {
-			pins = "GPIO6/IOX2CK/SMB2DSDA";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio7pp_pins: gpio7pp-pins {
-			pins = "GPIO7/IOX2D0/SMB2DSCL";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio8_pins: gpio8-pins {
-			pins = "GPIO8/LKGPO1";
-			bias-disable;
-			input-enable;
-		};
-		gpio9_pins: gpio9-pins {
-			pins = "GPIO9/LKGPO2";
-			bias-disable;
-			input-enable;
-		};
-		gpio10pp_pins: gpio10pp-pins {
-			pins = "GPIO10/IOXHLD";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio11pp_pins: gpio11pp-pins {
-			pins = "GPIO11/IOXHCK";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio12_pins: gpio12-pins {
-			pins = "GPIO12/GSPICK/SMB5BSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio13_pins: gpio13-pins {
-			pins = "GPIO13/GSPIDO/SMB5BSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio14_pins: gpio14-pins {
-			pins = "GPIO14/GSPIDI/SMB5CSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio15od_pins: gpio15od-pins {
-			pins = "GPIO15/GSPICS/SMB5CSDA";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio17pp_pins: gpio17pp-pins {
-			pins = "GPIO17/PSPI2DI/SMB4DEN";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio18pp_pins: gpio18pp-pins {
-			pins = "GPIO18/PSPI2D0/SMB4BSDA";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio19pp_pins: gpio19pp-pins {
-			pins = "GPIO19/PSPI2CK/SMB4BSCL";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio24pp_pins: gpio24pp-pins {
-			pins = "GPIO24/IOXHDO";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio25pp_pins: gpio25pp-pins {
-			pins = "GPIO25/IOXHDI";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio37od_pins: gpio37od-pins {
-			pins = "GPIO37/SMB3CSDA";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio59pp_pins: gpio59pp-pins {
-			pins = "GPIO59/SMB3DSDA";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio60_pins: gpio60-pins {
-			pins = "GPIO60/SMB3DSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio72od_pins: gpio72od-pins {
-			pins = "GPIO72/FANIN8";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio73od_pins: gpio73od-pins {
-			pins = "GPIO73/FANIN9";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio74od_pins: gpio74od-pins {
-			pins = "GPIO74/FANIN10";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio75od_pins: gpio75od-pins {
-			pins = "GPIO75/FANIN11";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio76od_pins: gpio76od-pins {
-			pins = "GPIO76/FANIN12";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio77od_pins: gpio77od-pins {
-			pins = "GPIO77/FANIN13";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio78od_pins: gpio78od-pins {
-			pins = "GPIO78/FANIN14";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio79od_pins: gpio79od-pins {
-			pins = "GPIO79/FANIN15";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio83_pins: gpio83-pins {
-			pins = "GPIO83/PWM3";
-			bias-disable;
-			input-enable;
-		};
-		gpio84pp_pins: gpio84pp-pins {
-			pins = "GPIO84/R2TXD0";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio85pp_pins: gpio85pp-pins {
-			pins = "GPIO85/R2TXD1";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio86pp_pins: gpio86pp-pins {
-			pins = "GPIO86/R2TXEN";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio87pp_pins: gpio87pp-pins {
-			pins = "GPIO87/R2RXD0";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio88pp_pins: gpio88pp-pins {
-			pins = "GPIO88/R2RXD1";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio89pp_pins: gpio89pp-pins {
-			pins = "GPIO89/R2CRSDV";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio90pp_pins: gpio90pp-pins {
-			pins = "GPIO90/R2RXERR";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio91_pins: gpio91-pins {
-			pins = "GPIO91/R2MDC";
-			bias-disable;
-			input-enable;
-		};
-		gpio92_pins: gpio92-pins {
-			pins = "GPIO92/R2MDIO";
-			bias-disable;
-			input-enable;
-		};
-		gpio93pp_pins: gpio93pp-pins {
-			pins = "GPIO93/GA20/SMB5DSCL";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio94pp_pins: gpio94pp-pins {
-			pins = "GPIO94/nKBRST/SMB5DSDA";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio95_pins: gpio95-pins {
-			pins = "GPIO95/nLRESET/nESPIRST";
-			bias-disable;
-			input-enable;
-		};
-		gpio125pp_pins: gpio125pp-pins {
-			pins = "GPIO125/SMB1CSCL";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio126od_pins: gpio126od-pins {
-			pins = "GPIO126/SMB1BSDA";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio127od_pins: gpio127od-pins {
-			pins = "GPIO127/SMB1BSCL";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio136_pins: gpio136-pins {
-			pins = "GPIO136/SD1DT0";
-			bias-disable;
-			input-enable;
-		};
-		gpio137_pins: gpio137-pins {
-			pins = "GPIO137/SD1DT1";
-			bias-disable;
-			input-enable;
-		};
-		gpio141_pins: gpio141-pins {
-			pins = "GPIO141/SD1WP";
-			bias-disable;
-			input-enable;
-		};
-		gpio142od_pins: gpio142od-pins {
-			pins = "GPIO142/SD1CMD";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio143ol_pins: gpio143ol-pins {
-			pins = "GPIO143/SD1CD/SD1PWR";
-			bias-disable;
-			output-low;
-		};
-		gpio144_pins: gpio144-pins {
-			pins = "GPIO144/PWM4";
-			bias-disable;
-			input-enable;
-		};
-		gpio145_pins: gpio145-pins {
-			pins = "GPIO145/PWM5";
-			bias-disable;
-			input-enable;
-		};
-		gpio146_pins: gpio146-pins {
-			pins = "GPIO146/PWM6";
-			bias-disable;
-			input-enable;
-		};
-		gpio147_pins: gpio147-pins {
-			pins = "GPIO147/PWM7";
-			bias-disable;
-			input-enable;
-		};
-		gpio148_pins: gpio148-pins {
-			pins = "GPIO148/MMCDT4";
-			bias-disable;
-			input-enable;
-		};
-		gpio149_pins: gpio149-pins {
-			pins = "GPIO149/MMCDT5";
-			bias-disable;
-			input-enable;
-		};
-		gpio150_pins: gpio150-pins {
-			pins = "GPIO150/MMCDT6";
-			bias-disable;
-			input-enable;
-		};
-		gpio151_pins: gpio151-pins {
-			pins = "GPIO151/MMCDT7";
-			bias-disable;
-			input-enable;
-		};
-		gpio152_pins: gpio152-pins {
-			pins = "GPIO152/MMCCLK";
-			bias-disable;
-			input-enable;
-		};
-		gpio153_pins: gpio153-pins {
-			pins = "GPIO153/MMCWP";
-			bias-disable;
-			input-enable;
-		};
-		gpio154_pins: gpio154-pins {
-			pins = "GPIO154/MMCCMD";
-			bias-disable;
-			input-enable;
-		};
-		gpio155_pins: gpio155-pins {
-			pins = "GPIO155/nMMCCD/nMMCRST";
-			bias-disable;
-			input-enable;
-		};
-		gpio156_pins: gpio156-pins {
-			pins = "GPIO156/MMCDT0";
-			bias-disable;
-			input-enable;
-		};
-		gpio157_pins: gpio157-pins {
-			pins = "GPIO157/MMCDT1";
-			bias-disable;
-			input-enable;
-		};
-		gpio158_pins: gpio158-pins {
-			pins = "GPIO158/MMCDT2";
-			bias-disable;
-			input-enable;
-		};
-		gpio159_pins: gpio159-pins {
-			pins = "GPIO159/MMCDT3";
-			bias-disable;
-			input-enable;
-		};
-		gpio161_pins: gpio161-pins {
-			pins = "GPIO161/nLFRAME/nESPICS";
-			bias-disable;
-			input-enable;
-		};
-		gpio162_pins: gpio162-pins {
-			pins = "GPIO162/SERIRQ";
-			bias-disable;
-			input-enable;
-		};
-		gpio163_pins: gpio163-pins {
-			pins = "GPIO163/LCLK/ESPICLK";
-			bias-disable;
-			input-enable;
-		};
-		gpio164_pins: gpio164-pins {
-			pins = "GPIO164/LAD0/ESPI_IO0";
-			bias-disable;
-			input-enable;
-		};
-		gpio165_pins: gpio165-pins {
-			pins = "GPIO165/LAD1/ESPI_IO1";
-			bias-disable;
-			input-enable;
-		};
-		gpio166_pins: gpio166-pins {
-			pins = "GPIO166/LAD2/ESPI_IO2";
-			bias-disable;
-			input-enable;
-		};
-		gpio167_pins: gpio167-pins {
-			pins = "GPIO167/LAD3/ESPI_IO3";
-			bias-disable;
-			input-enable;
-		};
-		gpio168_pins: gpio168-pins {
-			pins = "GPIO168/nCLKRUN/nESPIALERT";
-			bias-disable;
-			input-enable;
-		};
-		gpio169_pins: gpio169-pins {
-			pins = "GPIO169/nSCIPME";
-			bias-disable;
-			input-enable;
-		};
-		gpio170_pins: gpio170-pins {
-			pins = "GPIO170/nSMI";
-			bias-disable;
-			input-enable;
-		};
-		gpio175od_pins: gpio175od-pins {
-			pins = "GPIO175/PSPI1CK/FANIN19";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio176od_pins: gpio176od-pins {
-			pins = "GPIO176/PSPI1DO/FANIN18";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio177_pins: gpio177-pins {
-			pins = "GPIO177/PSPI1DI/FANIN17";
-			bias-disable;
-			input-enable;
-		};
-		gpio190od_pins: gpio190od-pins {
-			pins = "GPIO190/nPRD_SMI";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio191_pins: gpio191-pins {
-			pins = "GPIO191";
-			bias-disable;
-			input-enable;
-		};
-		gpio192_pins: gpio192-pins {
-			pins = "GPIO192";
-			bias-disable;
-			input-enable;
-		};
-		gpio194pp_pins: gpio194pp-pins {
-			pins = "GPIO194/SMB0BSCL";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio195od_pins: gpio195od-pins {
-			pins = "GPIO195/SMB0BSDA";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio196od_pins: gpio196od-pins {
-			pins = "GPIO196/SMB0CSCL";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio197od_pins: gpio197od-pins {
-			pins = "GPIO197/SMB0DEN";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio198od_pins: gpio198od-pins {
-			pins = "GPIO198/SMB0DSDA";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio199od_pins: gpio199od-pins {
-			pins = "GPIO199/SMB0DSCL";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio200pp_pins: gpio200pp-pins {
-			pins = "GPIO200/R2CK";
-			bias-disable;
-			drive-push-pull;
-		};
-		gpio202od_pins: gpio202od-pins {
-			pins = "GPIO202/SMB0CSDA";
-			bias-disable;
-			drive-open-drain;
-		};
-		gpio203_pins: gpio203-pins {
-			pins = "GPIO203/FANIN16";
-			bias-disable;
-			input-enable;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
deleted file mode 100644
index 2a394cc15284c..0000000000000
--- a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
+++ /dev/null
@@ -1,490 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2019 Quanta Computer lnc. Fran.Hsu@quantatw.com
-
-/dts-v1/;
-#include "nuvoton-npcm730.dtsi"
-#include "nuvoton-npcm730-gsj-gpio.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Quanta GSJ Board (Device Tree v12)";
-	compatible = "nuvoton,npcm750";
-
-	aliases {
-		ethernet1 = &gmac0;
-		serial3 = &serial3;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c8 = &i2c8;
-		i2c9 = &i2c9;
-		i2c10 = &i2c10;
-		i2c11 = &i2c11;
-		i2c12 = &i2c12;
-		i2c15 = &i2c15;
-		fiu0 = &fiu0;
-	};
-
-	chosen {
-		stdout-path = &serial3;
-	};
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-bmc-live {
-			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		LED_U2_0_LOCATE {
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_1_LOCATE {
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_2_LOCATE {
-			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_3_LOCATE {
-			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_4_LOCATE {
-			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_5_LOCATE {
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_BMC_TRAY_PWRGD {
-			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_7_FAULT {
-			gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_6_LOCATE {
-			gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_7_LOCATE {
-			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_0_FAULT {
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_1_FAULT {
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_2_FAULT {
-			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_3_FAULT {
-			gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_4_FAULT {
-			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_5_FAULT {
-			gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		LED_U2_6_FAULT {
-			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
-
-&fiu0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0cs1_pins>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-rx-bus-width = <2>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bmc@0{
-				label = "bmc";
-				reg = <0x000000 0x2000000>;
-			};
-			u-boot@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x80000>;
-				read-only;
-			};
-			u-boot-env@100000{
-				label = "u-boot-env";
-				reg = <0x00100000 0x40000>;
-			};
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x0200000 0x600000>;
-			};
-			rofs@800000 {
-				label = "rofs";
-				reg = <0x800000 0x1400000>;
-			};
-			rwfs@1c00000 {
-				label = "rwfs";
-				reg = <0x1c00000 0x300000>;
-			};
-			reserved@1f00000 {
-				label = "reserved";
-				reg = <0x1f00000 0x100000>;
-			};
-		};
-	};
-};
-
-&gmac0 {
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&watchdog1 {
-	status = "okay";
-};
-
-&rng {
-	status = "okay";
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&serial3 {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	lm75@5c {
-		compatible = "maxim,max31725";
-		reg = <0x5c>;
-		status = "okay";
-	};
-};
-
-&i2c2 {
-	status = "okay";
-
-	lm75@5c {
-		compatible = "maxim,max31725";
-		reg = <0x5c>;
-		status = "okay";
-	};
-};
-
-&i2c3 {
-	status = "okay";
-
-	lm75@5c {
-		compatible = "maxim,max31725";
-		reg = <0x5c>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	lm75@5c {
-		compatible = "maxim,max31725";
-		reg = <0x5c>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-
-	eeprom@55 {
-		compatible = "atmel,24c64";
-		reg = <0x55>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	eeprom@55 {
-		compatible = "atmel,24c64";
-		reg = <0x55>;
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	/* P12V Quarter Brick DC/DC Power Module Q54SH12050 @60 */
-	power-brick@36 {
-		compatible = "delta,dps800";
-		reg = <0x36>;
-	};
-
-	hotswap@15 {
-		compatible = "ti,lm5066i";
-		reg = <0x15>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-
-	ucd90160@6b {
-		compatible = "ti,ucd90160";
-		reg = <0x6b>;
-	};
-};
-
-&i2c15 {
-	status = "okay";
-
-	i2c-switch@75 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x75>;
-		i2c-mux-idle-disconnect;
-
-		i2c_u20: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c_u21: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c_u22: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c_u23: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		i2c_u24: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		i2c_u25: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		i2c_u26: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		i2c_u27: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&pwm_fan {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins &pwm1_pins &pwm2_pins
-			&fanin0_pins &fanin1_pins
-			&fanin2_pins &fanin3_pins
-			&fanin4_pins &fanin5_pins>;
-	status = "okay";
-
-	fan@0 {
-		reg = <0x00>;
-		fan-tach-ch = /bits/ 8 <0x00 0x01>;
-		cooling-levels = <127 255>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		fan-tach-ch = /bits/ 8 <0x02 0x03>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		fan-tach-ch = /bits/ 8 <0x04 0x05>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			/* GPI pins*/
-			&gpio8_pins
-			&gpio9_pins
-			&gpio12_pins
-			&gpio13_pins
-			&gpio14_pins
-			&gpio60_pins
-			&gpio83_pins
-			&gpio91_pins
-			&gpio92_pins
-			&gpio95_pins
-			&gpio136_pins
-			&gpio137_pins
-			&gpio141_pins
-			&gpio144_pins
-			&gpio145_pins
-			&gpio146_pins
-			&gpio147_pins
-			&gpio148_pins
-			&gpio149_pins
-			&gpio150_pins
-			&gpio151_pins
-			&gpio152_pins
-			&gpio153_pins
-			&gpio154_pins
-			&gpio155_pins
-			&gpio156_pins
-			&gpio157_pins
-			&gpio158_pins
-			&gpio159_pins
-			&gpio161_pins
-			&gpio162_pins
-			&gpio163_pins
-			&gpio164_pins
-			&gpio165_pins
-			&gpio166_pins
-			&gpio167_pins
-			&gpio168_pins
-			&gpio169_pins
-			&gpio170_pins
-			&gpio177_pins
-			&gpio191_pins
-			&gpio192_pins
-			&gpio203_pins
-			/* GPO pins*/
-			&gpio0pp_pins
-			&gpio1pp_pins
-			&gpio2pp_pins
-			&gpio3pp_pins
-			&gpio4pp_pins
-			&gpio5pp_pins
-			&gpio6pp_pins
-			&gpio7pp_pins
-			&gpio10pp_pins
-			&gpio11pp_pins
-			&gpio15od_pins
-			&gpio17pp_pins
-			&gpio18pp_pins
-			&gpio19pp_pins
-			&gpio24pp_pins
-			&gpio25pp_pins
-			&gpio37od_pins
-			&gpio59pp_pins
-			&gpio72od_pins
-			&gpio73od_pins
-			&gpio74od_pins
-			&gpio75od_pins
-			&gpio76od_pins
-			&gpio77od_pins
-			&gpio78od_pins
-			&gpio79od_pins
-			&gpio84pp_pins
-			&gpio85pp_pins
-			&gpio86pp_pins
-			&gpio87pp_pins
-			&gpio88pp_pins
-			&gpio89pp_pins
-			&gpio90pp_pins
-			&gpio93pp_pins
-			&gpio94pp_pins
-			&gpio125pp_pins
-			&gpio126od_pins
-			&gpio127od_pins
-			&gpio142od_pins
-			&gpio143ol_pins
-			&gpio175od_pins
-			&gpio176od_pins
-			&gpio190od_pins
-			&gpio194pp_pins
-			&gpio195od_pins
-			&gpio196od_pins
-			&gpio197od_pins
-			&gpio198od_pins
-			&gpio199od_pins
-			&gpio200pp_pins
-			&gpio202od_pins
-			>;
-};
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
deleted file mode 100644
index f7b38bee039bc..0000000000000
--- a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
+++ /dev/null
@@ -1,826 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2020 Fii USA Inc.
-
-/dts-v1/;
-#include "nuvoton-npcm730.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Fii Kudo Board";
-	compatible = "fii,kudo", "nuvoton,npcm730";
-
-	aliases {
-		ethernet1 = &gmac0;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		i2c8 = &i2c8;
-		i2c9 = &i2c9;
-		i2c10 = &i2c10;
-		i2c11 = &i2c11;
-		i2c12 = &i2c12;
-		i2c13 = &i2c13;
-		i2c14 = &i2c14;
-		i2c15 = &i2c15;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		fiu0 = &fiu0;
-		fiu1 = &fiu3;
-	};
-
-	chosen {
-		stdout-path = &serial3;
-	};
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
-	};
-
-	jtag_master {
-		compatible = "nuvoton,npcm750-jtag-master";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		// dev/jtag0
-		dev-num = <0>;
-		// pspi or gpio
-		mode = "pspi";
-
-		// pspi2
-		pspi-controller = <2>;
-		reg = <0xf0201000 0x1000>;
-		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clk NPCM7XX_CLK_APB5>;
-
-		// TCK, TDI, TDO, TMS
-		jtag-gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>,
-				<&gpio0 18 GPIO_ACTIVE_HIGH>,
-				<&gpio0 17 GPIO_ACTIVE_HIGH>,
-				<&gpio0 16 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		heartbeat {
-			label = "heartbeat";
-			gpios = <&gpio0 14 1>;
-		};
-	};
-
-	pinctrl: pinctrl@f0800000 {
-		gpio61oh_pins: gpio61oh-pins {
-			pins = "GPO61/nDTR1_BOUT1/STRAP6";
-			bias-disable;
-			output-high;
-		};
-		gpio62oh_pins: gpio62oh-pins {
-			pins = "GPO62/nRTST1/STRAP5";
-			bias-disable;
-			output-high;
-		};
-		gpio161ol_pins: gpio161ol-pins {
-			pins = "GPIO161/nLFRAME/nESPICS";
-			bias-disable;
-			output-low;
-		};
-		gpio163i_pins: gpio163i-pins {
-			pins = "GPIO163/LCLK/ESPICLK";
-			bias-disable;
-			input-enable;
-		};
-		gpio167ol_pins: gpio167ol-pins {
-			pins = "GPIO167/LAD3/ESPI_IO3";
-			bias-disable;
-			output-low;
-		};
-		gpio95i_pins: gpio95i-pins {
-			pins = "GPIO95/nLRESET/nESPIRST";
-			bias-disable;
-			input-enable;
-		};
-		gpio65ol_pins: gpio65ol-pins {
-			pins = "GPIO65/FANIN1";
-			bias-disable;
-			output-low;
-		};
-		gpio66oh_pins: gpio66oh-pins {
-			pins = "GPIO66/FANIN2";
-			bias-disable;
-			output-high;
-		};
-		gpio67oh_pins: gpio67oh-pins {
-			pins = "GPIO67/FANIN3";
-			bias-disable;
-			output-high;
-		};
-		gpio68ol_pins: gpio68ol-pins {
-			pins = "GPIO68/FANIN4";
-			bias-disable;
-			output-low;
-		};
-		gpio69i_pins: gpio69i-pins {
-			pins = "GPIO69/FANIN5";
-			bias-disable;
-			input-enable;
-		};
-		gpio70ol_pins: gpio70ol-pins {
-			pins = "GPIO70/FANIN6";
-			bias-disable;
-			output-low;
-		};
-		gpio71i_pins: gpio71i-pins {
-			pins = "GPIO71/FANIN7";
-			bias-disable;
-			input-enable;
-		};
-		gpio72i_pins: gpio72i-pins {
-			pins = "GPIO72/FANIN8";
-			bias-disable;
-			input-enable;
-		};
-		gpio73i_pins: gpio73i-pins {
-			pins = "GPIO73/FANIN9";
-			bias-disable;
-			input-enable;
-		};
-		gpio74i_pins: gpio74i-pins {
-			pins = "GPIO74/FANIN10";
-			bias-disable;
-			input-enable;
-		};
-		gpio75i_pins: gpio75i-pins {
-			pins = "GPIO75/FANIN11";
-			bias-disable;
-			input-enable;
-		};
-		gpio76i_pins: gpio76i-pins {
-			pins = "GPIO76/FANIN12";
-			bias-disable;
-			input-enable;
-		};
-		gpio77i_pins: gpio77i-pins {
-			pins = "GPIO77/FANIN13";
-			bias-disable;
-			input-enable;
-		};
-		gpio78i_pins: gpio78i-pins {
-			pins = "GPIO78/FANIN14";
-			bias-disable;
-			input-enable;
-		};
-		gpio79ol_pins: gpio79ol-pins {
-			pins = "GPIO79/FANIN15";
-			bias-disable;
-			output-low;
-		};
-		gpio80oh_pins: gpio80oh-pins {
-			pins = "GPIO80/PWM0";
-			bias-disable;
-			output-high;
-		};
-		gpio81i_pins: gpio81i-pins {
-			pins = "GPIO81/PWM1";
-			bias-disable;
-			input-enable;
-		};
-		gpio82i_pins: gpio82i-pins {
-			pins = "GPIO82/PWM2";
-			bias-disable;
-			input-enable;
-		};
-		gpio83i_pins: gpio83i-pins {
-			pins = "GPIO83/PWM3";
-			bias-disable;
-			input-enable;
-		};
-		gpio144i_pins: gpio144i-pins {
-			pins = "GPIO144/PWM4";
-			bias-disable;
-			input-enable;
-		};
-		gpio145i_pins: gpio145i-pins {
-			pins = "GPIO145/PWM5";
-			bias-disable;
-			input-enable;
-		};
-		gpio146i_pins: gpio146i-pins {
-			pins = "GPIO146/PWM6";
-			bias-disable;
-			input-enable;
-		};
-		gpio147oh_pins: gpio147oh-pins {
-			pins = "GPIO147/PWM7";
-			bias-disable;
-			output-high;
-		};
-		gpio168ol_pins: gpio168ol-pins {
-			pins = "GPIO168/nCLKRUN/nESPIALERT";
-			bias-disable;
-			output-low;
-		};
-		gpio169oh_pins: gpio169oh-pins {
-			pins = "GPIO169/nSCIPME";
-			bias-disable;
-			output-high;
-		};
-		gpio170ol_pins: gpio170ol-pins {
-			pins = "GPIO170/nSMI";
-			bias-disable;
-			output-low;
-		};
-		gpio218oh_pins: gpio218oh-pins {
-			pins = "GPIO218/nWDO1";
-			bias-disable;
-			output-high;
-		};
-		gpio37i_pins: gpio37i-pins {
-			pins = "GPIO37/SMB3CSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio38i_pins: gpio38i-pins {
-			pins = "GPIO38/SMB3CSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio39i_pins: gpio39i-pins {
-			pins = "GPIO39/SMB3BSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio40i_pins: gpio40i-pins {
-			pins = "GPIO40/SMB3BSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio121i_pins: gpio121i-pins {
-			pins = "GPIO121/SMB2CSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio122i_pins: gpio122i-pins {
-			pins = "GPIO122/SMB2BSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio123i_pins: gpio123i-pins {
-			pins = "GPIO123/SMB2BSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio124i_pins: gpio124i-pins {
-			pins = "GPIO124/SMB1CSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio125i_pins: gpio125i-pins {
-			pins = "GPIO125/SMB1CSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio126i_pins: gpio126i-pins {
-			pins = "GPIO126/SMB1BSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio127i_pins: gpio127i-pins {
-			pins = "GPIO127/SMB1BSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio136i_pins: gpio136i-pins {
-			pins = "GPIO136/SD1DT0";
-			bias-disable;
-			input-enable;
-		};
-		gpio137oh_pins: gpio137oh-pins {
-			pins = "GPIO137/SD1DT1";
-			bias-disable;
-			output-high;
-		};
-		gpio138i_pins: gpio138i-pins {
-			pins = "GPIO138/SD1DT2";
-			bias-disable;
-			input-enable;
-		};
-		gpio139i_pins: gpio139i-pins {
-			pins = "GPIO139/SD1DT3";
-			bias-disable;
-			input-enable;
-		};
-		gpio140i_pins: gpio140i-pins {
-			pins = "GPIO140/SD1CLK";
-			bias-disable;
-			input-enable;
-		};
-		gpio141i_pins: gpio141i-pins {
-			pins = "GPIO141/SD1WP";
-			bias-disable;
-			input-enable;
-		};
-		gpio190oh_pins: gpio190oh-pins {
-			pins = "GPIO190/nPRD_SMI";
-			bias-disable;
-			output-high;
-		};
-		gpio191oh_pins: gpio191oh-pins {
-			pins = "GPIO191";
-			bias-disable;
-			output-high;
-		};
-		gpio195ol_pins: gpio195ol-pins {
-			pins = "GPIO195/SMB0BSDA";
-			bias-disable;
-			output-low;
-		};
-		gpio196ol_pins: gpio196ol-pins {
-			pins = "GPIO196/SMB0CSCL";
-			bias-disable;
-			output-low;
-		};
-		gpio199i_pins: gpio199i-pins {
-			pins = "GPIO199/SMB0DSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio202ol_pins: gpio202ol-pins {
-			pins = "GPIO202/SMB0CSDA";
-			bias-disable;
-			output-low;
-		};
-	};
-};
-
-&gmac0 {
-	phy-mode = "rgmii-id";
-	snps,eee-force-disable;
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&fiu0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0cs1_pins>;
-	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-		spi-rx-bus-width = <2>;
-		label = "bmc";
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			u-boot@0 {
-				label = "u-boot";
-				reg = <0x0000000 0xC0000>;
-				read-only;
-			};
-			u-boot-env@100000{
-				label = "u-boot-env";
-				reg = <0x00100000 0x40000>;
-			};
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x0200000 0x600000>;
-			};
-			rofs@800000 {
-				label = "rofs";
-				reg = <0x800000 0x3500000>;
-			};
-			rwfs@3d00000 {
-				label = "rwfs";
-				reg = <0x3d00000 0x300000>;
-			};
-		};
-	};
-	flash@1 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <1>;
-		spi-max-frequency = <5000000>;
-		spi-rx-bus-width = <2>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			spare1@0 {
-				label = "spi0-cs1-spare1";
-				reg = <0x0 0x800000>;
-			};
-			spare2@800000 {
-				label = "spi0-cs1-spare2";
-				reg = <0x800000 0x0>;
-			};
-		};
-	};
-};
-
-&fiu3 {
-	pinctrl-0 = <&spi3_pins>;
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-		spi-rx-bus-width = <2>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			system1@0 {
-				label = "bios";
-				reg = <0x0 0x0>;
-			};
-			system2@800000 {
-				label = "spi3-system2";
-				reg = <0x800000 0x0>;
-			};
-		};
-	};
-};
-
-&watchdog1 {
-	status = "okay";
-};
-
-&rng {
-	status = "okay";
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&serial3 {
-	status = "okay";
-};
-
-&adc {
-	#io-channel-cells = <1>;
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-	i2c-switch@75 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x75>;
-		i2c-mux-idle-disconnect;
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			// Rear-Fan
-			max31790@58 {
-				compatible = "maxim,max31790";
-				reg = <0x58>;
-			};
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			// Mid-Fan
-			max31790@58 {
-				compatible = "maxim,max31790";
-				reg = <0x58>;
-			};
-		};
-
-		i2c-bus@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			// INLET1_T
-			lm75@5c {
-				compatible = "ti,lm75";
-				reg = <0x5c>;
-			};
-		};
-
-		i2c-bus@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			// OUTLET1_T
-			lm75@5c {
-				compatible = "ti,lm75";
-				reg = <0x5c>;
-			};
-		};
-
-		i2c-bus@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			// OUTLET2_T
-			lm75@5c {
-				compatible = "ti,lm75";
-				reg = <0x5c>;
-			};
-		};
-
-		i2c-bus@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			// OUTLET3_T
-			lm75@5c {
-				compatible = "ti,lm75";
-				reg = <0x5c>;
-			};
-		};
-	};
-	i2c-switch@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-		i2c-mux-idle-disconnect;
-
-		i2c-bus@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			// STB-T
-			pmbus@74 {
-				compatible = "pmbus";
-				reg = <0x74>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	smpro@4f {
-		compatible = "ampere,smpro";
-		reg = <0x4f>;
-	};
-
-	smpro@4e {
-		compatible = "ampere,smpro";
-		reg = <0x4e>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-	i2c-switch@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-		i2c-mux-idle-disconnect;
-
-		i2c-bus@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			// ADC sensors
-			adm1266@40 {
-				compatible = "adi,adm1266";
-				reg = <0x40>;
-			};
-		};
-
-		i2c-bus@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			// ADC sensors
-			adm1266@41 {
-				compatible = "adi,adm1266";
-				reg = <0x41>;
-			};
-		};
-	};
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-	ssif-bmc@10 {
-		compatible = "ssif-bmc";
-		reg = <0x10>;
-	};
-};
-
-&i2c13 {
-	status = "okay";
-	i2c-switch@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-		i2c-mux-idle-disconnect;
-
-		i2c-bus@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			// M2_ZONE_T
-			lm75@28 {
-				compatible = "ti,lm75";
-				reg = <0x28>;
-			};
-		};
-
-		i2c-bus@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			// BATT_ZONE_T
-			lm75@29 {
-				compatible = "ti,lm75";
-				reg = <0x29>;
-			};
-		};
-
-		i2c-bus@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			// NBM1_ZONE_T
-			lm75@28 {
-				compatible = "ti,lm75";
-				reg = <0x28>;
-			};
-		};
-		i2c-bus@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			// NBM2_ZONE_T
-			lm75@29 {
-				compatible = "ti,lm75";
-				reg = <0x29>;
-			};
-		};
-	};
-};
-
-&i2c14 {
-	status = "okay";
-};
-
-&i2c15 {
-	status = "okay";
-};
-
-&spi0 {
-	cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&gpio61oh_pins
-			&gpio62oh_pins
-			&gpio161ol_pins
-			&gpio163i_pins
-			&gpio167ol_pins
-			&gpio95i_pins
-			&gpio65ol_pins
-			&gpio66oh_pins
-			&gpio67oh_pins
-			&gpio68ol_pins
-			&gpio69i_pins
-			&gpio70ol_pins
-			&gpio71i_pins
-			&gpio72i_pins
-			&gpio73i_pins
-			&gpio74i_pins
-			&gpio75i_pins
-			&gpio76i_pins
-			&gpio77i_pins
-			&gpio78i_pins
-			&gpio79ol_pins
-			&gpio80oh_pins
-			&gpio81i_pins
-			&gpio82i_pins
-			&gpio83i_pins
-			&gpio144i_pins
-			&gpio145i_pins
-			&gpio146i_pins
-			&gpio147oh_pins
-			&gpio168ol_pins
-			&gpio169oh_pins
-			&gpio170ol_pins
-			&gpio218oh_pins
-			&gpio37i_pins
-			&gpio38i_pins
-			&gpio39i_pins
-			&gpio40i_pins
-			&gpio121i_pins
-			&gpio122i_pins
-			&gpio123i_pins
-			&gpio124i_pins
-			&gpio125i_pins
-			&gpio126i_pins
-			&gpio127i_pins
-			&gpio136i_pins
-			&gpio137oh_pins
-			&gpio138i_pins
-			&gpio139i_pins
-			&gpio140i_pins
-			&gpio141i_pins
-			&gpio190oh_pins
-			&gpio191oh_pins
-			&gpio195ol_pins
-			&gpio196ol_pins
-			&gpio199i_pins
-			&gpio202ol_pins
-			>;
-};
-
-&gcr {
-	serial_port_mux: mux-controller {
-		compatible = "mmio-mux";
-		#mux-control-cells = <1>;
-
-		mux-reg-masks = <0x38 0x07>;
-		idle-states = <2>;
-	};
-};
diff --git a/arch/arm/boot/dts/nuvoton-npcm730.dtsi b/arch/arm/boot/dts/nuvoton-npcm730.dtsi
deleted file mode 100644
index 86ec12ec2b507..0000000000000
--- a/arch/arm/boot/dts/nuvoton-npcm730.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2020 Nuvoton Technology
-
-#include "nuvoton-common-npcm7xx.dtsi"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "nuvoton,npcm750-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			clocks = <&clk NPCM7XX_CLK_CPU>;
-			clock-names = "clk_cpu";
-			reg = <0>;
-			next-level-cache = <&l2>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			clocks = <&clk NPCM7XX_CLK_CPU>;
-			clock-names = "clk_cpu";
-			reg = <1>;
-			next-level-cache = <&l2>;
-		};
-	};
-
-	soc {
-		timer@3fe600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x3fe600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&clk NPCM7XX_CLK_AHB>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
deleted file mode 100644
index f53d45fa1de87..0000000000000
--- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ /dev/null
@@ -1,404 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
-// Copyright 2018 Google, Inc.
-
-/dts-v1/;
-#include "nuvoton-npcm750.dtsi"
-#include "dt-bindings/gpio/gpio.h"
-#include "nuvoton-npcm750-pincfg-evb.dtsi"
-
-/ {
-	model = "Nuvoton npcm750 Development Board (Device Tree)";
-	compatible = "nuvoton,npcm750-evb", "nuvoton,npcm750";
-
-	aliases {
-		ethernet2 = &gmac0;
-		ethernet3 = &gmac1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		i2c8 = &i2c8;
-		i2c9 = &i2c9;
-		i2c10 = &i2c10;
-		i2c11 = &i2c11;
-		i2c12 = &i2c12;
-		i2c13 = &i2c13;
-		i2c14 = &i2c14;
-		i2c15 = &i2c15;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		fiu0 = &fiu0;
-		fiu1 = &fiu3;
-		fiu2 = &fiux;
-	};
-
-	chosen {
-		stdout-path = &serial3;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x20000000>;
-	};
-};
-
-&gmac0 {
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
-
-&gmac1 {
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&fiu0 {
-	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-rx-bus-width = <2>;
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bbuboot1@0 {
-				label = "bb-uboot-1";
-				reg = <0x0000000 0x80000>;
-				read-only;
-				};
-			bbuboot2@80000 {
-				label = "bb-uboot-2";
-				reg = <0x0080000 0x80000>;
-				read-only;
-				};
-			envparam@100000 {
-				label = "env-param";
-				reg = <0x0100000 0x40000>;
-				read-only;
-				};
-			spare@140000 {
-				label = "spare";
-				reg = <0x0140000 0xC0000>;
-				};
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x0200000 0x400000>;
-				};
-			rootfs@600000 {
-				label = "rootfs";
-				reg = <0x0600000 0x700000>;
-				};
-			spare1@d00000 {
-				label = "spare1";
-				reg = <0x0D00000 0x200000>;
-				};
-			spare2@f00000 {
-				label = "spare2";
-				reg = <0x0F00000 0x200000>;
-				};
-			spare3@1100000 {
-				label = "spare3";
-				reg = <0x1100000 0x200000>;
-				};
-			spare4@1300000 {
-				label = "spare4";
-				reg = <0x1300000 0x0>;
-			};
-		};
-	};
-};
-
-&fiu3 {
-	pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>;
-	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-rx-bus-width = <2>;
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			system1@0 {
-				label = "spi3-system1";
-				reg = <0x0 0x0>;
-			};
-		};
-	};
-};
-
-&fiux {
-	spix-mode;
-};
-
-&watchdog1 {
-	status = "okay";
-};
-
-&rng {
-	status = "okay";
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&serial3 {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&lpc_kcs {
-	kcs1: kcs1@0 {
-		status = "okay";
-	};
-
-	kcs2: kcs2@0 {
-		status = "okay";
-	};
-
-	kcs3: kcs3@0 {
-		status = "okay";
-	};
-};
-
-/* lm75 on SVB */
-&i2c0 {
-	clock-frequency = <100000>;
-	status = "okay";
-	lm75@48 {
-		compatible = "lm75";
-		reg = <0x48>;
-		status = "okay";
-	};
-};
-
-/* lm75 on EB */
-&i2c1 {
-	clock-frequency = <100000>;
-	status = "okay";
-	lm75@48 {
-		compatible = "lm75";
-		reg = <0x48>;
-		status = "okay";
-	};
-};
-
-/* tmp100 on EB */
-&i2c2 {
-	clock-frequency = <100000>;
-	status = "okay";
-	tmp100@48 {
-		compatible = "tmp100";
-		reg = <0x48>;
-		status = "okay";
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c5 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-/* tmp100 on SVB */
-&i2c6 {
-	clock-frequency = <100000>;
-	status = "okay";
-	tmp100@48 {
-		compatible = "tmp100";
-		reg = <0x48>;
-		status = "okay";
-	};
-};
-
-&i2c7 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c8 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c9 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c10 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c11 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c14 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&pwm_fan {
-	status = "okay";
-	fan@0 {
-		reg = <0x00>;
-		fan-tach-ch = /bits/ 8 <0x00 0x01>;
-		cooling-levels = <127 255>;
-	};
-	fan@1 {
-		reg = <0x01>;
-		fan-tach-ch = /bits/ 8 <0x02 0x03>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-	fan@2 {
-		reg = <0x02>;
-		fan-tach-ch = /bits/ 8 <0x04 0x05>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-	fan@3 {
-		reg = <0x03>;
-		fan-tach-ch = /bits/ 8 <0x06 0x07>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-	fan@4 {
-		reg = <0x04>;
-		fan-tach-ch = /bits/ 8 <0x08 0x09>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-	fan@5 {
-		reg = <0x05>;
-		fan-tach-ch = /bits/ 8 <0x0A 0x0B>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-	fan@6 {
-		reg = <0x06>;
-		fan-tach-ch = /bits/ 8 <0x0C 0x0D>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-	fan@7 {
-		reg = <0x07>;
-		fan-tach-ch = /bits/ 8 <0x0E 0x0F>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-};
-
-&spi0 {
-	cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-	flash@0 {
-		compatible = "winbond,w25q128",
-		"jedec,spi-nor";
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <5000000>;
-		partition@0 {
-			label = "spi0_spare1";
-			reg = <0x0000000 0x800000>;
-		};
-		partition@1 {
-			label = "spi0_spare2";
-			reg = <0x800000 0x0>;
-		};
-	};
-};
-
-&spi1 {
-	cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-	status = "okay";
-	flash@0 {
-		compatible = "winbond,w25q128fw",
-		"jedec,spi-nor";
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <5000000>;
-		partition@0 {
-			label = "spi1_spare1";
-			reg = <0x0000000 0x800000>;
-		};
-		partition@1 {
-			label = "spi1_spare2";
-			reg = <0x800000 0x0>;
-		};
-	};
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <	&iox1_pins
-			&pin8_input
-			&pin9_output_high
-			&pin10_input
-			&pin11_output_high
-			&pin16_input
-			&pin24_output_high
-			&pin25_output_low
-			&pin32_output_high
-			&jtag2_pins
-			&pin61_output_high
-			&pin62_output_high
-			&pin63_output_high
-			&lpc_pins
-			&pin160_input
-			&pin162_input
-			&pin168_input
-			&pin169_input
-			&pin170_input
-			&pin187_output_high
-			&pin190_input
-			&pin191_output_high
-			&pin192_output_high
-			&pin197_output_low
-			&ddc_pins
-			&pin218_input
-			&pin219_output_low
-			&pin220_output_low
-			&pin221_output_high
-			&pin222_input
-			&pin223_output_low
-			&spix_pins
-			&pin228_output_low
-			&pin231_output_high
-			&pin255_input>;
-};
-
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi b/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi
deleted file mode 100644
index 3b3806274adf7..0000000000000
--- a/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018 Nuvoton Technology
-
-/ {
-	pinctrl: pinctrl@f0800000 {
-		pin8_input: pin8-input {
-			pins = "GPIO8/LKGPO1";
-			bias-disable;
-			input-enable;
-		};
-		pin9_output_high: pin9-output-high {
-			pins = "GPIO9/LKGPO2";
-			bias-disable;
-			output-high;
-		};
-		pin10_input: pin10-input {
-			pins = "GPIO10/IOXHLD";
-			bias-disable;
-			input-enable;
-		};
-		pin11_output_high: pin11-output-high {
-			pins = "GPIO11/IOXHCK";
-			bias-disable;
-			output-high;
-		};
-		pin16_input: pin16-input {
-			pins = "GPIO16/LKGPO0";
-			bias-disable;
-			input-enable;
-		};
-		pin24_output_high: pin24-output-high {
-			pins = "GPIO24/IOXHDO";
-			bias-disable;
-			output-high;
-		};
-		pin25_output_low: pin25-output-low {
-			pins = "GPIO25/IOXHDI";
-			bias-disable;
-			output-low;
-		};
-		pin32_output_high: pin32-output-high {
-			pins = "GPIO32/nSPI0CS1";
-			bias-disable;
-			output-high;
-		};
-		pin61_output_high: pin61-output-high {
-			pins = "GPO61/nDTR1_BOUT1/STRAP6";
-			bias-disable;
-			output-high;
-		};
-		pin62_output_high: pin62-output-high {
-			pins = "GPO62/nRTST1/STRAP5";
-			bias-disable;
-			output-high;
-		};
-		pin63_output_high: pin63-output-high {
-			pins = "GPO63/TXD1/STRAP4";
-			bias-disable;
-			output-high;
-		};
-		pin160_input: pin160-input {
-			pins = "GPIO160/CLKOUT/RNGOSCOUT";
-			bias-disable;
-			input-enable;
-		};
-		pin162_input: pin162-input {
-			pins = "GPIO162/SERIRQ";
-			bias-disable;
-			input-enable;
-		};
-		pin168_input: pin168-input {
-			pins = "GPIO168/nCLKRUN/nESPIALERT";
-			bias-disable;
-			input-enable;
-		};
-		pin169_input: pin169-input {
-			pins = "GPIO169/nSCIPME";
-			bias-disable;
-			input-enable;
-		};
-		pin170_input: pin170-input {
-			pins = "GPIO170/nSMI";
-			bias-disable;
-			input-enable;
-		};
-		pin187_output_high: pin187-output-high {
-			pins = "GPIO187/nSPI3CS1";
-			bias-disable;
-			output-high;
-		};
-		pin190_input: pin190-input {
-			pins = "GPIO190/nPRD_SMI";
-			bias-disable;
-			input-enable;
-		};
-		pin191_output_high: pin191-output-high {
-			pins = "GPIO191";
-			bias-disable;
-			output-high;
-		};
-		pin192_output_high: pin192-output-high {
-			pins = "GPIO192";
-			bias-disable;
-			output-high;
-		};
-		pin197_output_low: pin197-output-low {
-			pins = "GPIO197/SMB0DEN";
-			bias-disable;
-			output-low;
-		};
-		pin218_input: pin218-input {
-			pins = "GPIO218/nWDO1";
-			bias-disable;
-			input-enable;
-		};
-		pin219_output_low: pin219-output-low {
-			pins = "GPIO219/nWDO2";
-			bias-disable;
-			output-low;
-		};
-		pin220_output_low: pin220-output-low {
-			pins = "GPIO220/SMB12SCL";
-			bias-disable;
-			output-low;
-		};
-		pin221_output_high: pin221-output-high {
-			pins = "GPIO221/SMB12SDA";
-			bias-disable;
-			output-high;
-		};
-		pin222_input: pin222-input {
-			pins = "GPIO222/SMB13SCL";
-			bias-disable;
-			input-enable;
-		};
-		pin223_output_low: pin223-output-low {
-			pins = "GPIO223/SMB13SDA";
-			bias-disable;
-			output-low;
-		};
-		pin228_output_low: pin228-output-low {
-			pins = "GPIO228/nSPIXCS1";
-			bias-disable;
-			output-low;
-		};
-		pin231_output_high: pin231-output-high {
-			pins = "GPIO230/SPIXD3";
-			bias-disable;
-			output-high;
-		};
-		pin255_input: pin255-input {
-			pins = "GPI255/DACOSEL";
-			bias-disable;
-			input-enable;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi
deleted file mode 100644
index 230cb344b2e1d..0000000000000
--- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi
+++ /dev/null
@@ -1,517 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2019 Quanta Computer Inc. Samuel.Jiang@quantatw.com
-
-/ {
-	pinctrl: pinctrl@f0800000 {
-		gpio0ol_pins: gpio0ol-pins {
-			pins = "GPIO0/IOX1DI";
-			bias-disable;
-			output-low;
-		};
-		gpio1ol_pins: gpio1ol-pins {
-			pins = "GPIO1/IOX1LD";
-			bias-disable;
-			output-low;
-		};
-		gpio2ol_pins: gpio2ol-pins {
-			pins = "GPIO2/IOX1CK";
-			bias-disable;
-			output-low;
-		};
-		gpio3ol_pins: gpio3ol-pins {
-			pins = "GPIO3/IOX1D0";
-			bias-disable;
-			output-low;
-		};
-		gpio5_pins: gpio5-pins {
-			pins = "GPIO5/IOX2LD/SMB1DSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio6_pins: gpio6-pins {
-			pins = "GPIO6/IOX2CK/SMB2DSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio7_pins: gpio7-pins {
-			pins = "GPIO7/IOX2D0/SMB2DSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio8o_pins: gpio8o-pins {
-			pins = "GPIO8/LKGPO1";
-			bias-disable;
-			output-high;
-		};
-		gpio9ol_pins: gpio9ol-pins {
-			pins = "GPIO9/LKGPO2";
-			bias-disable;
-			output-low;
-		};
-		gpio10_pins: gpio10-pins {
-			pins = "GPIO10/IOXHLD";
-			bias-disable;
-			input-enable;
-		};
-		gpio11_pins: gpio11-pins {
-			pins = "GPIO11/IOXHCK";
-			bias-disable;
-			input-enable;
-		};
-		gpio12ol_pins: gpio12ol-pins {
-			pins = "GPIO12/GSPICK/SMB5BSCL";
-			bias-disable;
-			output-low;
-		};
-		gpio13ol_pins: gpio13ol-pins {
-			pins = "GPIO13/GSPIDO/SMB5BSDA";
-			bias-disable;
-			output-low;
-		};
-		gpio14ol_pins: gpio14ol-pins {
-			pins = "GPIO14/GSPIDI/SMB5CSCL";
-			bias-disable;
-			output-low;
-		};
-		gpio15ol_pins: gpio15ol-pins {
-			pins = "GPIO15/GSPICS/SMB5CSDA";
-			bias-disable;
-			output-low;
-		};
-		gpio20_pins: gpio20-pins {
-			pins = "GPIO20/SMB4CSDA/SMB15SDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio21_pins: gpio21-pins {
-			pins = "GPIO21/SMB4CSCL/SMB15SCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio22o_pins: gpio22o-pins {
-			pins = "GPIO22/SMB4DSDA/SMB14SDA";
-			bias-disable;
-			output-high;
-		};
-		gpio23_pins: gpio23-pins {
-			pins = "GPIO23/SMB4DSCL/SMB14SCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio24_pins: gpio24-pins {
-			pins = "GPIO24/IOXHDO";
-			bias-disable;
-			input-enable;
-		};
-		gpio25_pins: gpio25-pins {
-			pins = "GPIO25/IOXHDI";
-			bias-disable;
-			input-enable;
-		};
-		gpio30_pins: gpio30-pins {
-			pins = "GPIO30/SMB3SDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio31_pins: gpio31-pins {
-			pins = "GPIO31/SMB3SCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio37o_pins: gpio37o-pins {
-			pins = "GPIO37/SMB3CSDA";
-			bias-disable;
-			output-high;
-		};
-		gpio38_pins: gpio38-pins {
-			pins = "GPIO38/SMB3CSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio39_pins: gpio39-pins {
-			pins = "GPIO39/SMB3BSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio40o_pins: gpio40o-pins {
-			pins = "GPIO40/SMB3BSCL";
-			bias-disable;
-			output-high;
-		};
-		gpio59_pins: gpio59-pins {
-			pins = "GPIO59/SMB3DSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio76_pins: gpio76-pins {
-			pins = "GPIO76/FANIN12";
-			bias-disable;
-			input-enable;
-		};
-		gpio77_pins: gpio77-pins {
-			pins = "GPIO77/FANIN13";
-			bias-disable;
-			input-enable;
-		};
-		gpio78o_pins: gpio78o-pins {
-			pins = "GPIO78/FANIN14";
-			bias-disable;
-			output-high;
-		};
-		gpio79_pins: gpio79-pins {
-			pins = "GPIO79/FANIN15";
-			bias-disable;
-			input-enable;
-		};
-		gpio82_pins: gpio82-pins {
-			pins = "GPIO82/PWM2";
-			bias-disable;
-			input-enable;
-		};
-		gpio83_pins: gpio83-pins {
-			pins = "GPIO83/PWM3";
-			bias-disable;
-			input-enable;
-		};
-		gpio84_pins: gpio84-pins {
-			pins = "GPIO84/R2TXD0";
-			bias-disable;
-			input-enable;
-		};
-		gpio85o_pins: gpio85o-pins {
-			pins = "GPIO85/R2TXD1";
-			bias-disable;
-			output-high;
-		};
-		gpio86ol_pins: gpio86ol-pins {
-			pins = "GPIO86/R2TXEN";
-			bias-disable;
-			output-low;
-		};
-		gpio87_pins: gpio87-pins {
-			pins = "GPIO87/R2RXD0";
-			bias-disable;
-			input-enable;
-		};
-		gpio88_pins: gpio88-pins {
-			pins = "GPIO88/R2RXD1";
-			bias-disable;
-			input-enable;
-		};
-		gpio89_pins: gpio89-pins {
-			pins = "GPIO89/R2CRSDV";
-			bias-disable;
-			input-enable;
-		};
-		gpio90_pins: gpio90-pins {
-			pins = "GPIO90/R2RXERR";
-			bias-disable;
-			input-enable;
-		};
-		gpio93_pins: gpio93-pins {
-			pins = "GPIO93/GA20/SMB5DSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio94ol_pins: gpio94ol-pins {
-			pins = "GPIO94/nKBRST/SMB5DSDA";
-			bias-disable;
-			output-low;
-		};
-		gpio108ol_pins: gpio108ol-pins {
-			pins = "GPIO108/RG1MDC";
-			bias-disable;
-			output-low;
-		};
-		gpio109ol_pins: gpio109ol-pins {
-			pins = "GPIO109/RG1MDIO";
-			bias-disable;
-			output-low;
-		};
-		gpio110ol_pins: gpio110ol-pins {
-			pins = "GPIO110/RG2TXD0/DDRV0";
-			bias-disable;
-			output-low;
-		};
-		gpio111ol_pins: gpio111ol-pins {
-			pins = "GPIO111/RG2TXD1/DDRV1";
-			bias-disable;
-			output-low;
-		};
-		gpio112ol_pins: gpio112ol-pins {
-			pins = "GPIO112/RG2TXD2/DDRV2";
-			bias-disable;
-			output-low;
-		};
-		gpio113ol_pins: gpio113ol-pins {
-			pins = "GPIO113/RG2TXD3/DDRV3";
-			bias-disable;
-			output-low;
-		};
-		gpio114o_pins: gpio114o-pins {
-			pins = "GPIO114/SMB0SCL";
-			bias-disable;
-			output-high;
-		};
-		gpio115_pins: gpio115-pins {
-			pins = "GPIO115/SMB0SDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio120_pins: gpio120-pins {
-			pins = "GPIO120/SMB2CSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio121_pins: gpio121-pins {
-			pins = "GPIO121/SMB2CSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio122_pins: gpio122-pins {
-			pins = "GPIO122/SMB2BSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio123_pins: gpio123-pins {
-			pins = "GPIO123/SMB2BSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio124_pins: gpio124-pins {
-			pins = "GPIO124/SMB1CSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio125_pins: gpio125-pins {
-			pins = "GPIO125/SMB1CSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio126_pins: gpio126-pins {
-			pins = "GPIO126/SMB1BSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio127o_pins: gpio127o-pins {
-			pins = "GPIO127/SMB1BSCL";
-			bias-disable;
-			output-high;
-		};
-		gpio136_pins: gpio136-pins {
-			pins = "GPIO136/SD1DT0";
-			bias-disable;
-			input-enable;
-		};
-		gpio137_pins: gpio137-pins {
-			pins = "GPIO137/SD1DT1";
-			bias-disable;
-			input-enable;
-		};
-		gpio138_pins: gpio138-pins {
-			pins = "GPIO138/SD1DT2";
-			bias-disable;
-			input-enable;
-		};
-		gpio139_pins: gpio139-pins {
-			pins = "GPIO139/SD1DT3";
-			bias-disable;
-			input-enable;
-		};
-		gpio140_pins: gpio140-pins {
-			pins = "GPIO140/SD1CLK";
-			bias-disable;
-			input-enable;
-		};
-		gpio141_pins: gpio141-pins {
-			pins = "GPIO141/SD1WP";
-			bias-disable;
-			input-enable;
-		};
-		gpio142_pins: gpio142-pins {
-			pins = "GPIO142/SD1CMD";
-			bias-disable;
-			input-enable;
-		};
-		gpio143_pins: gpio143-pins {
-			pins = "GPIO143/SD1CD/SD1PWR";
-			bias-disable;
-			input-enable;
-		};
-		gpio144_pins: gpio144-pins {
-			pins = "GPIO144/PWM4";
-			bias-disable;
-			input-enable;
-		};
-		gpio145_pins: gpio145-pins {
-			pins = "GPIO145/PWM5";
-			bias-disable;
-			input-enable;
-		};
-		gpio146_pins: gpio146-pins {
-			pins = "GPIO146/PWM6";
-			bias-disable;
-			input-enable;
-		};
-		gpio147_pins: gpio147-pins {
-			pins = "GPIO147/PWM7";
-			bias-disable;
-			input-enable;
-		};
-		gpio153o_pins: gpio153o-pins {
-			pins = "GPIO153/MMCWP";
-			bias-disable;
-			output-high;
-		};
-		gpio155_pins: gpio155-pins {
-			pins = "GPIO155/nMMCCD/nMMCRST";
-			bias-disable;
-			input-enable;
-		};
-		gpio160o_pins: gpio160o-pins {
-			pins = "GPIO160/CLKOUT/RNGOSCOUT";
-			bias-disable;
-			output-high;
-		};
-		gpio169o_pins: gpio169o-pins {
-			pins = "GPIO169/nSCIPME";
-			bias-disable;
-			output-high;
-		};
-		gpio188o_pins: gpio188o-pins {
-			pins = "GPIO188/SPI3D2/nSPI3CS2";
-			bias-disable;
-			output-high;
-		};
-		gpio189_pins: gpio189-pins {
-			pins = "GPIO189/SPI3D3/nSPI3CS3";
-			bias-disable;
-			input-enable;
-		};
-		gpio196_pins: gpio196-pins {
-			pins = "GPIO196/SMB0CSCL";
-			bias-disable;
-			input-enable;
-		};
-		gpio197_pins: gpio197-pins {
-			pins = "GPIO197/SMB0DEN";
-			bias-disable;
-			input-enable;
-		};
-		gpio198o_pins: gpio198o-pins {
-			pins = "GPIO198/SMB0DSDA";
-			bias-disable;
-			output-high;
-		};
-		gpio199o_pins: gpio199o-pins {
-			pins = "GPIO199/SMB0DSCL";
-			bias-disable;
-			output-high;
-		};
-		gpio200_pins: gpio200-pins {
-			pins = "GPIO200/R2CK";
-			input-enable;
-			bias-disable;
-		};
-		gpio202_pins: gpio202-pins {
-			pins = "GPIO202/SMB0CSDA";
-			bias-disable;
-			input-enable;
-		};
-		gpio203o_pins: gpio203o-pins {
-			pins = "GPIO203/FANIN16";
-			bias-disable;
-			output-high;
-		};
-		gpio208_pins: gpio208-pins {
-			pins = "GPIO208/RG2TXC/DVCK";
-			bias-disable;
-			input-enable;
-		};
-		gpio209ol_pins: gpio209ol-pins {
-			pins = "GPIO209/RG2TXCTL/DDRV4";
-			bias-disable;
-			output-low;
-		};
-		gpio210ol_pins: gpio210ol-pins {
-			pins = "GPIO210/RG2RXD0/DDRV5";
-			bias-disable;
-			output-low;
-		};
-		gpio211ol_pins: gpio211ol-pins {
-			pins = "GPIO211/RG2RXD1/DDRV6";
-			bias-disable;
-			output-low;
-		};
-		gpio212ol_pins: gpio212ol-pins {
-			pins = "GPIO212/RG2RXD2/DDRV7";
-			bias-disable;
-			output-low;
-		};
-		gpio213ol_pins: gpio213ol-pins {
-			pins = "GPIO213/RG2RXD3/DDRV8";
-			bias-disable;
-			output-low;
-		};
-		gpio214ol_pins: gpio214ol-pins {
-			pins = "GPIO214/RG2RXC/DDRV9";
-			bias-disable;
-			output-low;
-		};
-		gpio215ol_pins: gpio215ol-pins {
-			pins = "GPIO215/RG2RXCTL/DDRV10";
-			bias-disable;
-			output-low;
-		};
-		gpio216ol_pins: gpio216ol-pins {
-			pins = "GPIO216/RG2MDC/DDRV11";
-			bias-disable;
-			output-low;
-		};
-		gpio217ol_pins: gpio217ol-pins {
-			pins = "GPIO217/RG2MDIO/DVHSYNC";
-			bias-disable;
-			output-low;
-		};
-		gpio224_pins: gpio224-pins {
-			pins = "GPIO224/SPIXCK";
-			bias-disable;
-			input-enable;
-		};
-		gpio225ol_pins: gpio225ol-pins {
-			pins = "GPO225/SPIXD0/STRAP12";
-			bias-disable;
-			output-low;
-		};
-		gpio226ol_pins: gpio226ol-pins {
-			pins = "GPO226/SPIXD1/STRAP13";
-			bias-disable;
-			output-low;
-		};
-		gpio227ol_pins: gpio227ol-pins {
-			pins = "GPIO227/nSPIXCS0";
-			bias-disable;
-			output-low;
-		};
-		gpio228o_pins: gpio228ol-pins {
-			pins = "GPIO228/nSPIXCS1";
-			bias-disable;
-			output-high;
-		};
-		gpio229o_pins: gpio229o-pins {
-			pins = "GPO229/SPIXD2/STRAP3";
-			bias-disable;
-			output-high;
-		};
-		gpio230_pins: gpio230-pins {
-			pins = "GPIO230/SPIXD3";
-			bias-disable;
-			input-enable;
-		};
-		gpio231o_pins: gpio231o-pins {
-			pins = "GPIO231/nCLKREQ";
-			bias-disable;
-			output-high;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
deleted file mode 100644
index 87359ab05db3e..0000000000000
--- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
+++ /dev/null
@@ -1,1052 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2019 Nuvoton Technology <kwliu@nuvoton.com>
-// Copyright (c) 2019 Quanta Computer Inc. <Samuel.Jiang@quantatw.com>
-
-/dts-v1/;
-#include "nuvoton-npcm750.dtsi"
-#include "nuvoton-npcm750-runbmc-olympus-pincfg.dtsi"
-
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Nuvoton npcm750 RunBMC Olympus";
-	compatible = "nuvoton,npcm750";
-
-	aliases {
-		ethernet1 = &gmac0;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		i2c8 = &i2c8;
-		i2c9 = &i2c9;
-		i2c10 = &i2c10;
-		i2c11 = &i2c11;
-		i2c12 = &i2c12;
-		i2c13 = &i2c13;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		fiu0 = &fiu0;
-		fiu1 = &fiu3;
-	};
-
-	chosen {
-		stdout-path = &serial3;
-	};
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		heartbeat {
-		label = "heartbeat";
-			gpios = <&gpio3 14 1>;
-		};
-
-		identify {
-			label = "identify";
-			gpios = <&gpio3 15 1>;
-		};
-	};
-
-	jtag {
-		compatible = "nuvoton,npcm750-jtag";
-		enable_pspi_jtag = <1>;
-		pspi-index = <2>;
-		tck {
-			label = "tck";
-			gpios = <&gpio0 19 0>; /* gpio19 */
-			regbase = <0xf0010000 0x1000>;
-		};
-
-		tdi {
-			label = "tdi";
-			gpios = <&gpio0 18 0>; /* gpio18 */
-			regbase = <0xf0010000 0x1000>;
-		};
-
-		tdo {
-			label = "tdo";
-			gpios = <&gpio0 17 0>; /* gpio17 */
-			regbase = <0xf0010000 0x1000>;
-		};
-		tms {
-			label = "tms";
-			gpios = <&gpio0 16 0>; /* gpio16 */
-			regbase = <0xf0010000 0x1000>;
-		};
-	};
-};
-
-&fiu0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0cs1_pins>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-rx-bus-width = <2>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bmc@0{
-				label = "bmc";
-				reg = <0x000000 0x2000000>;
-			};
-			u-boot@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x80000>;
-				read-only;
-			};
-			u-boot-env@100000{
-				label = "u-boot-env";
-				reg = <0x00100000 0x40000>;
-			};
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x0200000 0x600000>;
-			};
-			rofs@800000 {
-				label = "rofs";
-				reg = <0x800000 0x1500000>;
-			};
-			rwfs@1d00000 {
-				label = "rwfs";
-				reg = <0x1d00000 0x300000>;
-			};
-		};
-	};
-
-	flash@1 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <1>;
-		npcm,fiu-rx-bus-width = <2>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			spare1@0 {
-				label = "spi0-cs1-spare1";
-				reg = <0x0 0x800000>;
-			};
-			spare2@800000 {
-				label = "spi0-cs1-spare2";
-				reg = <0x800000 0x0>;
-			};
-		};
-	};
-};
-
-&fiu3 {
-	pinctrl-0 = <&spi3_pins>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-rx-bus-width = <2>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			system1@0 {
-				label = "spi3-system1";
-				reg = <0x0 0x800000>;
-			};
-			system2@800000 {
-				label = "spi3-system2";
-				reg = <0x800000 0x0>;
-			};
-		};
-	};
-};
-
-&gcr {
-	mux-controller {
-		compatible = "mmio-mux";
-		#mux-control-cells = <1>;
-
-		mux-reg-masks = <0x38 0x07>;
-		idle-states = <6>;
-	};
-};
-
-&gmac0 {
-	phy-mode = "rgmii-id";
-	snps,eee-force-disable;
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		i2c_slot1a: i2c-bus@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c_slot1b: i2c-bus@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c_slot2a: i2c-bus@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c_slot2b: i2c-bus@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		i2c_slot3: i2c-bus@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		i2c_slot4: i2c-bus@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		i2c_slot5: i2c-bus@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-	};
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9546";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c_m2_s1: i2c-bus@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c_m2_s2: i2c-bus@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-		i2c_m2_s3: i2c-bus@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c_m2_s4: i2c-bus@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c2 {
-	status = "okay";
-
-	tmp421@4c {
-		compatible = "ti,tmp421";
-		reg = <0x4c>;
-	};
-
-	power-supply@58 {
-		compatible = "delta,dps800";
-		reg = <0x58>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	i2c-slave-mqueue@10 {
-		compatible = "i2c-slave-mqueue";
-		reg = <(I2C_OWN_SLAVE_ADDRESS | 0x10)>;
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	ina219@40 {
-		compatible = "ti,ina219";
-		reg = <0x40>;
-	};
-	ina219@41 {
-		compatible = "ti,ina219";
-		reg = <0x41>;
-	};
-	ina219@44 {
-		compatible = "ti,ina219";
-		reg = <0x44>;
-	};
-	ina219@45 {
-		compatible = "ti,ina219";
-		reg = <0x45>;
-	};
-	tps53679@60 {
-		compatible = "ti,tps53679";
-		reg = <0x60>;
-	};
-	tps53659@62 {
-		compatible = "ti,tps53659";
-		reg = <0x62>;
-	};
-	tps53659@64 {
-		compatible = "ti,tps53659";
-		reg = <0x64>;
-	};
-	tps53622@67 {
-		compatible = "ti,tps53622";
-		reg = <0x67>;
-	};
-	tps53622@69 {
-		compatible = "ti,tps53622";
-		reg = <0x69>;
-	};
-	tps53679@70 {
-		compatible = "ti,tps53679";
-		reg = <0x70>;
-	};
-	tps53659@72 {
-		compatible = "ti,tps53659";
-		reg = <0x72>;
-	};
-	tps53659@74 {
-		compatible = "ti,tps53659";
-		reg = <0x74>;
-	};
-	tps53622@77 {
-		compatible = "ti,tps53622";
-		reg = <0x77>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	tmp421@4c {
-		compatible = "ti,tmp421";
-		reg = <0x4c>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	adm1278@11 {
-		compatible = "adm1278";
-		reg = <0x11>;
-		Rsense = <500>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-
-	gpio: pca9555@27 {
-		compatible = "nxp,pca9555";
-		reg = <0x27>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	pca9539_g1a: pca9539-g1a@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		reset-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-		G1A_P0_0 {
-			gpio-hog;
-			gpios = <0 0>;
-			output-high;
-			line-name = "TPM_BMC_ALERT_N";
-		};
-		G1A_P0_1 {
-			gpio-hog;
-			gpios = <1 0>;
-			input;
-			line-name = "FM_BIOS_TOP_SWAP";
-		};
-		G1A_P0_2 {
-			gpio-hog;
-			gpios = <2 0>;
-			input;
-			line-name = "FM_BIOS_PREFRB2_GOOD";
-		};
-		G1A_P0_3 {
-			gpio-hog;
-			gpios = <3 0>;
-			input;
-			line-name = "BMC_SATAXPCIE_0TO3_SEL";
-		};
-		G1A_P0_4 {
-			gpio-hog;
-			gpios = <4 0>;
-			input;
-			line-name = "BMC_SATAXPCIE_4TO7_SEL";
-		};
-		G1A_P0_5 {
-			gpio-hog;
-			gpios = <5 0>;
-			output-low;
-			line-name = "FM_UV_ADR_TRIGGER_EN_N";
-		};
-		G1A_P0_6 {
-			gpio-hog;
-			gpios = <6 0>;
-			input;
-			line-name = "RM_THROTTLE_EN_N";
-		};
-		G1A_P1_0 {
-			gpio-hog;
-			gpios = <8 0>;
-			input;
-			line-name = "FM_BMC_TPM_PRES_N";
-		};
-		G1A_P1_1 {
-			gpio-hog;
-			gpios = <9 0>;
-			input;
-			line-name = "FM_CPU0_SKTOCC_LVT3_N";
-		};
-		G1A_P1_2 {
-			gpio-hog;
-			gpios = <10 0>;
-			input;
-			line-name = "FM_CPU1_SKTOCC_LVT3_N";
-		};
-		G1A_P1_3 {
-			gpio-hog;
-			gpios = <11 0>;
-			input;
-			line-name = "PSU1_ALERT_N";
-		};
-		G1A_P1_4 {
-			gpio-hog;
-			gpios = <12 0>;
-			input;
-			line-name = "PSU2_ALERT_N";
-		};
-		G1A_P1_5 {
-			gpio-hog;
-			gpios = <13 0>;
-			input;
-			line-name = "H_CPU0_FAST_WAKE_LVT3_N";
-		};
-		G1A_P1_6 {
-			gpio-hog;
-			gpios = <14 0>;
-			output-high;
-			line-name = "I2C_MUX1_RESET_N";
-		};
-		G1A_P1_7 {
-			gpio-hog;
-			gpios = <15 0>;
-			input;
-			line-name = "FM_CPU_CATERR_LVT3_N";
-		};
-	};
-
-	pca9539_g1b: pca9539-g1b@75 {
-		compatible = "nxp,pca9539";
-		reg = <0x75>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		G1B_P0_0 {
-			gpio-hog;
-			gpios = <0 0>;
-			input;
-			line-name = "PVDDQ_ABC_PINALERT_N";
-		};
-		G1B_P0_1 {
-			gpio-hog;
-			gpios = <1 0>;
-			input;
-			line-name = "PVDDQ_DEF_PINALERT_N";
-		};
-		G1B_P0_2 {
-			gpio-hog;
-			gpios = <2 0>;
-			input;
-			line-name = "PVDDQ_GHJ_PINALERT_N";
-		};
-		G1B_P0_3 {
-			gpio-hog;
-			gpios = <3 0>;
-			input;
-			line-name = "PVDDQ_KLM_PINALERT_N";
-		};
-		G1B_P0_5 {
-			gpio-hog;
-			gpios = <5 0>;
-			input;
-			line-name = "FM_BOARD_REV_ID0";
-		};
-		G1B_P0_6 {
-			gpio-hog;
-			gpios = <6 0>;
-			input;
-			line-name = "FM_BOARD_REV_ID1";
-		};
-		G1B_P0_7 {
-			gpio-hog;
-			gpios = <7 0>;
-			input;
-			line-name = "FM_BOARD_REV_ID2";
-		};
-		G1B_P1_0 {
-			gpio-hog;
-			gpios = <8 0>;
-			input;
-			line-name = "FM_OC_DETECT_EN_N";
-		};
-		G1B_P1_1 {
-			gpio-hog;
-			gpios = <9 0>;
-			input;
-			line-name = "FM_FLASH_DESC_OVERRIDE";
-		};
-		G1B_P1_2 {
-			gpio-hog;
-			gpios = <10 0>;
-			output-low;
-			line-name = "FP_PWR_ID_LED_N";
-		};
-		G1B_P1_3 {
-			gpio-hog;
-			gpios = <11 0>;
-			output-low;
-			line-name = "BMC_LED_PWR_GRN";
-		};
-		G1B_P1_4 {
-			gpio-hog;
-			gpios = <12 0>;
-			output-low;
-			line-name = "BMC_LED_PWR_AMBER";
-		};
-		G1B_P1_5 {
-			gpio-hog;
-			gpios = <13 0>;
-			output-high;
-			line-name = "FM_BMC_FAULT_LED_N";
-		};
-		G1B_P1_6 {
-			gpio-hog;
-			gpios = <14 0>;
-			output-high;
-			line-name = "FM_CPLD_BMC_PWRDN_N";
-		};
-		G1B_P1_7 {
-			gpio-hog;
-			gpios = <15 0>;
-			output-high;
-			line-name = "BMC_LED_CATERR_N";
-		};
-	};
-};
-
-&i2c12 {
-	status = "okay";
-
-	pca9539_g2a: pca9539-g2a@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		reset-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-		G2A_P0_0 {
-			gpio-hog;
-			gpios = <0 0>;
-			output-high;
-			line-name = "BMC_PON_RST_REQ_N";
-		};
-		G2A_P0_1 {
-			gpio-hog;
-			gpios = <1 0>;
-			output-high;
-			line-name = "BMC_RST_IND_REQ_N";
-		};
-		G2A_P0_2 {
-			gpio-hog;
-			gpios = <2 0>;
-			input;
-			line-name = "RST_BMC_RTCRST";
-		};
-		G2A_P0_3 {
-			gpio-hog;
-			gpios = <3 0>;
-			output-high;
-			line-name = "FM_BMC_PWRBTN_OUT_N";
-		};
-		G2A_P0_4 {
-			gpio-hog;
-			gpios = <4 0>;
-			output-high;
-			line-name = "RST_BMC_SYSRST_BTN_OUT_N";
-		};
-		G2A_P0_5 {
-			gpio-hog;
-			gpios = <5 0>;
-			output-high;
-			line-name = "FM_BATTERY_SENSE_EN_N";
-		};
-		G2A_P0_6 {
-			gpio-hog;
-			gpios = <6 0>;
-			output-high;
-			line-name = "FM_BMC_READY_N";
-		};
-		G2A_P0_7 {
-			gpio-hog;
-			gpios = <7 0>;
-			input;
-			line-name = "IRQ_BMC_PCH_SMI_LPC_N";
-		};
-		G2A_P1_0 {
-			gpio-hog;
-			gpios = <8 0>;
-			input;
-			line-name = "FM_SLOT4_CFG0";
-		};
-		G2A_P1_1 {
-			gpio-hog;
-			gpios = <9 0>;
-			input;
-			line-name = "FM_SLOT4_CFG1";
-		};
-		G2A_P1_2 {
-			gpio-hog;
-			gpios = <10 0>;
-			input;
-			line-name = "FM_NVDIMM_EVENT_N";
-		};
-		G2A_P1_3 {
-			gpio-hog;
-			gpios = <11 0>;
-			input;
-			line-name = "PSU1_BLADE_EN_N";
-		};
-		G2A_P1_4 {
-			gpio-hog;
-			gpios = <12 0>;
-			input;
-			line-name = "BMC_PCH_FNM";
-		};
-		G2A_P1_5 {
-			gpio-hog;
-			gpios = <13 0>;
-			input;
-			line-name = "FM_SOL_UART_CH_SEL";
-		};
-		G2A_P1_6 {
-			gpio-hog;
-			gpios = <14 0>;
-			input;
-			line-name = "FM_BIOS_POST_CMPLT_N";
-		};
-	};
-
-	pca9539_g2b: pca9539-g2b@75 {
-		compatible = "nxp,pca9539";
-		reg = <0x75>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		G2B_P0_0 {
-			gpio-hog;
-			gpios = <0 0>;
-			input;
-			line-name = "FM_CPU_MSMI_LVT3_N";
-		};
-		G2B_P0_1 {
-			gpio-hog;
-			gpios = <1 0>;
-			input;
-			line-name = "FM_BIOS_MRC_DEBUG_MSG_DIS";
-		};
-		G2B_P0_2 {
-			gpio-hog;
-			gpios = <2 0>;
-			input;
-			line-name = "FM_CPU1_DISABLE_BMC_N";
-		};
-		G2B_P0_3 {
-			gpio-hog;
-			gpios = <3 0>;
-			output-low;
-			line-name = "BMC_JTAG_SELECT";
-		};
-		G2B_P0_4 {
-			gpio-hog;
-			gpios = <4 0>;
-			output-high;
-			line-name = "PECI_MUX_SELECT";
-		};
-		G2B_P0_5 {
-			gpio-hog;
-			gpios = <5 0>;
-			output-high;
-			line-name = "I2C_MUX2_RESET_N";
-		};
-		G2B_P0_6 {
-			gpio-hog;
-			gpios = <6 0>;
-			input;
-			line-name = "FM_BMC_CPLD_PSU2_ON";
-		};
-		G2B_P0_7 {
-			gpio-hog;
-			gpios = <7 0>;
-			output-high;
-			line-name = "PSU2_ALERT_EN_N";
-		};
-		G2B_P1_0 {
-			gpio-hog;
-			gpios = <8 0>;
-			output-high;
-			line-name = "FM_CPU_BMC_INIT";
-		};
-		G2B_P1_1 {
-			gpio-hog;
-			gpios = <9 0>;
-			output-high;
-			line-name = "IRQ_BMC_PCH_SCI_LPC_N";
-		};
-		G2B_P1_2 {
-			gpio-hog;
-			gpios = <10 0>;
-			output-low;
-			line-name = "PMB_ALERT_EN_N";
-		};
-		G2B_P1_3 {
-			gpio-hog;
-			gpios = <11 0>;
-			output-high;
-			line-name = "FM_FAST_PROCHOT_EN_N";
-		};
-		G2B_P1_4 {
-			gpio-hog;
-			gpios = <12 0>;
-			output-high;
-			line-name = "BMC_NVDIMM_PRSNT_N";
-		};
-		G2B_P1_5 {
-			gpio-hog;
-			gpios = <13 0>;
-			output-low;
-			line-name = "FM_BACKUP_BIOS_SEL_H_BMC";
-		};
-		G2B_P1_6 {
-			gpio-hog;
-			gpios = <14 0>;
-			output-high;
-			line-name = "FM_PWRBRK_N";
-		};
-	};
-};
-
-&i2c13 {
-	status = "okay";
-
-	tmp75@4a {
-		compatible = "ti,tmp75";
-		reg = <0x4a>;
-		status = "okay";
-	};
-	m24128_fru@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-		pagesize = <64>;
-		status = "okay";
-	};
-};
-
-&pwm_fan {
-	pinctrl-names = "default";
-	pinctrl-0 = <   &pwm0_pins &pwm1_pins
-			&fanin0_pins &fanin1_pins
-			&fanin2_pins &fanin3_pins
-			&fanin4_pins &fanin5_pins
-			&fanin6_pins &fanin7_pins
-			&fanin8_pins &fanin9_pins
-			&fanin10_pins &fanin11_pins>;
-	status = "okay";
-
-	fan@0 {
-		reg = <0x00>;
-		fan-tach-ch = /bits/ 8 <0x00 0x01>;
-		cooling-levels = <127 255>;
-	};
-	fan@1 {
-		reg = <0x01>;
-		fan-tach-ch = /bits/ 8 <0x02 0x03>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-	fan@2 {
-		reg = <0x02>;
-		fan-tach-ch = /bits/ 8 <0x04 0x05>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-	fan@3 {
-		reg = <0x03>;
-		fan-tach-ch = /bits/ 8 <0x06 0x07>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-	fan@4 {
-		reg = <0x04>;
-		fan-tach-ch = /bits/ 8 <0x08 0x09>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-	fan@5 {
-		reg = <0x05>;
-		fan-tach-ch = /bits/ 8 <0x0A 0x0B>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-	fan@6 {
-		reg = <0x06>;
-		fan-tach-ch = /bits/ 8 <0x0C 0x0D>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-	fan@7 {
-		reg = <0x07>;
-		fan-tach-ch = /bits/ 8 <0x0E 0x0F>;
-		cooling-levels = /bits/ 8 <127 255>;
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&watchdog1 {
-	status = "okay";
-};
-
-&rng {
-	status = "okay";
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&serial3 {
-	status = "okay";
-};
-
-&adc {
-	#io-channel-cells = <1>;
-	status = "okay";
-};
-
-&kcs1 {
-	status = "okay";
-};
-
-&kcs2 {
-	status = "okay";
-};
-
-&kcs3 {
-	status = "okay";
-};
-
-&spi0 {
-	cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			/******* RunBMC inside Module pins *******/
-			&gpio0ol_pins
-			&gpio1ol_pins
-			&gpio2ol_pins
-			&gpio3ol_pins
-			&gpio8o_pins
-			&gpio9ol_pins
-			&gpio12ol_pins
-			&gpio13ol_pins
-			&gpio14ol_pins
-			&gpio15ol_pins
-			&gpio37o_pins
-			&gpio38_pins
-			&gpio39_pins
-			&gpio94ol_pins
-			&gpio108ol_pins
-			&gpio109ol_pins
-			&gpio111ol_pins
-			&gpio112ol_pins
-			&gpio113ol_pins
-			&gpio208_pins
-			&gpio209ol_pins
-			&gpio210ol_pins
-			&gpio211ol_pins
-			&gpio212ol_pins
-			&gpio213ol_pins
-			&gpio214ol_pins
-			&gpio215ol_pins
-			&gpio216ol_pins
-			&gpio217ol_pins
-			/******* RunBMC outside Connector pins *******/
-			&gpio5_pins
-			&gpio6_pins
-			&gpio7_pins
-			&gpio10_pins
-			&gpio11_pins
-			&gpio20_pins
-			&gpio21_pins
-			&gpio22o_pins
-			&gpio23_pins
-			&gpio24_pins
-			&gpio25_pins
-			&gpio30_pins
-			&gpio31_pins
-			&gpio40o_pins
-			&gpio59_pins
-			&gpio76_pins
-			&gpio77_pins
-			&gpio78o_pins
-			&gpio79_pins
-			&gpio82_pins
-			&gpio83_pins
-			&gpio84_pins
-			&gpio85o_pins
-			&gpio86ol_pins
-			&gpio87_pins
-			&gpio88_pins
-			&gpio89_pins
-			&gpio90_pins
-			&gpio93_pins
-			&gpio114o_pins
-			&gpio115_pins
-			&gpio120_pins
-			&gpio121_pins
-			&gpio122_pins
-			&gpio123_pins
-			&gpio124_pins
-			&gpio125_pins
-			&gpio126_pins
-			&gpio127o_pins
-			&gpio136_pins
-			&gpio137_pins
-			&gpio138_pins
-			&gpio139_pins
-			&gpio140_pins
-			&gpio141_pins
-			&gpio142_pins
-			&gpio143_pins
-			&gpio144_pins
-			&gpio146_pins
-			&gpio145_pins
-			&gpio147_pins
-			&gpio153o_pins
-			&gpio155_pins
-			&gpio160o_pins
-			&gpio169o_pins
-			&gpio188o_pins
-			&gpio189_pins
-			&gpio196_pins
-			&gpio197_pins
-			&gpio198o_pins
-			&gpio199o_pins
-			&gpio200_pins
-			&gpio202_pins
-			&gpio203o_pins
-			&gpio224_pins
-			&gpio225ol_pins
-			&gpio226ol_pins
-			&gpio227ol_pins
-			&gpio228o_pins
-			&gpio229o_pins
-			&gpio230_pins
-			&gpio231o_pins
-			&ddc_pins
-			&wdog1_pins
-			&wdog2_pins
-			>;
-};
diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
deleted file mode 100644
index 30eed40b89b5c..0000000000000
--- a/arch/arm/boot/dts/nuvoton-npcm750.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
-// Copyright 2018 Google, Inc.
-
-#include "nuvoton-common-npcm7xx.dtsi"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "nuvoton,npcm750-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			clocks = <&clk NPCM7XX_CLK_CPU>;
-			clock-names = "clk_cpu";
-			reg = <0>;
-			next-level-cache = <&l2>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			clocks = <&clk NPCM7XX_CLK_CPU>;
-			clock-names = "clk_cpu";
-			reg = <1>;
-			next-level-cache = <&l2>;
-		};
-	};
-
-	soc {
-		timer@3fe600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x3fe600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&clk NPCM7XX_CLK_AHB>;
-		};
-	};
-
-	ahb {
-		gmac1: eth@f0804000 {
-			device_type = "network";
-			compatible = "snps,dwmac";
-			reg = <0xf0804000 0x2000>;
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			ethernet = <1>;
-			clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
-			clock-names = "stmmaceth", "clk_gmac";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rg2_pins
-					&rg2mdio_pins>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
deleted file mode 100644
index b78c116cbc18e..0000000000000
--- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-// Copyright 2021 Jonathan Neuschäfer
-
-/dts-v1/;
-
-/* The last 16 MiB are dedicated to the GPU */
-/memreserve/ 0x07000000 0x01000000;
-
-#include "nuvoton-wpcm450.dtsi"
-
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Supermicro X9SCi-LN4F BMC";
-	compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x08000000>; /* 128 MiB */
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&key_pins>;
-
-		uid {
-			label = "UID button";
-			linux,code = <KEY_HOME>;
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		uid {
-			label = "UID";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		heartbeat {
-			label = "heartbeat";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&fiu {
-	status = "okay";
-
-	flash@0 {
-		reg = <0>;
-		compatible = "jedec,spi-nor";
-	};
-};
-
-&gpio0 {
-	gpio-line-names =
-		/* 0 */ "", "host-reset-control-n", "", "", "", "", "", "",
-		/* 8 */ "", "", "", "", "power-chassis-control-n", "", "uid-button", "";
-};
-
-&gpio1 {
-	gpio-line-names =
-		/* 0 */ "", "", "", "", "led-heartbeat", "", "", "led-uid",
-		/* 8 */ "", "", "", "", "", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		/* 0 */ "", "", "", "", "", "", "", "",
-		/* 8 */ "", "", "", "", "", "", "", "power-chassis-good";
-};
-
-&pinctrl {
-	key_pins: mux-keys {
-		groups = "gspi", "sspi";
-		function = "gpio";
-	};
-
-	led_pins: mux-leds {
-		groups = "hg3", "hg0", "pwm4";
-		function = "gpio";
-	};
-};
-
-&serial0 {
-	/*
-	 * Debug serial port. TX is exposed on the right pad of unpopulated
-	 * resistor R1247, RX on the right pad of R1162.
-	 */
-	status = "okay";
-};
-
-&serial1 {
-	/* "Serial over LAN" port. Connected to ttyS2 of the host system. */
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
deleted file mode 100644
index fd671c7a1e5d6..0000000000000
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ /dev/null
@@ -1,493 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-// Copyright 2021 Jonathan Neuschäfer
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "nuvoton,wpcm450";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
-		gpio4 = &gpio4;
-		gpio5 = &gpio5;
-		gpio6 = &gpio6;
-		gpio7 = &gpio7;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	clk24m: clock-24mhz {
-		/* 24 MHz dummy clock */
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-	refclk: clock-48mhz {
-		/* 48 MHz reference oscillator */
-		compatible = "fixed-clock";
-		clock-output-names = "ref";
-		clock-frequency = <48000000>;
-		#clock-cells = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&aic>;
-		ranges;
-
-		gcr: syscon@b0000000 {
-			compatible = "nuvoton,wpcm450-gcr", "syscon", "simple-mfd";
-			reg = <0xb0000000 0x200>;
-		};
-
-		clk: clock-controller@b0000200 {
-			compatible = "nuvoton,wpcm450-clk";
-			reg = <0xb0000200 0x100>;
-			clocks = <&refclk>;
-			clock-names = "ref";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		serial0: serial@b8000000 {
-			compatible = "nuvoton,wpcm450-uart";
-			reg = <0xb8000000 0x20>;
-			reg-shift = <2>;
-			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk24m>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&bsp_pins>;
-			status = "disabled";
-		};
-
-		serial1: serial@b8000100 {
-			compatible = "nuvoton,wpcm450-uart";
-			reg = <0xb8000100 0x20>;
-			reg-shift = <2>;
-			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk24m>;
-			status = "disabled";
-		};
-
-		timer0: timer@b8001000 {
-			compatible = "nuvoton,wpcm450-timer";
-			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0xb8001000 0x1c>;
-			clocks = <&clk24m>;
-		};
-
-		watchdog0: watchdog@b800101c {
-			compatible = "nuvoton,wpcm450-wdt";
-			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0xb800101c 0x4>;
-			clocks = <&clk24m>;
-		};
-
-		aic: interrupt-controller@b8002000 {
-			compatible = "nuvoton,wpcm450-aic";
-			reg = <0xb8002000 0x1000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pinctrl: pinctrl@b8003000 {
-			compatible = "nuvoton,wpcm450-pinctrl";
-			reg = <0xb8003000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio0: gpio@0 {
-				reg = <0>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
-					     <3 IRQ_TYPE_LEVEL_HIGH>,
-					     <4 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-			};
-
-			gpio1: gpio@1 {
-				reg = <1>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-			};
-
-			gpio2: gpio@2 {
-				reg = <2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			gpio3: gpio@3 {
-				reg = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			gpio4: gpio@4 {
-				reg = <4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			gpio5: gpio@5 {
-				reg = <5>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			gpio6: gpio@6 {
-				reg = <6>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			gpio7: gpio@7 {
-				reg = <7>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			smb3_pins: mux-smb3 {
-				groups = "smb3";
-				function = "smb3";
-			};
-
-			smb4_pins: mux-smb4 {
-				groups = "smb4";
-				function = "smb4";
-			};
-
-			smb5_pins: mux-smb5 {
-				groups = "smb5";
-				function = "smb5";
-			};
-
-			scs1_pins: mux-scs1 {
-				groups = "scs1";
-				function = "scs1";
-			};
-
-			scs2_pins: mux-scs2 {
-				groups = "scs2";
-				function = "scs2";
-			};
-
-			scs3_pins: mux-scs3 {
-				groups = "scs3";
-				function = "scs3";
-			};
-
-			smb0_pins: mux-smb0 {
-				groups = "smb0";
-				function = "smb0";
-			};
-
-			smb1_pins: mux-smb1 {
-				groups = "smb1";
-				function = "smb1";
-			};
-
-			smb2_pins: mux-smb2 {
-				groups = "smb2";
-				function = "smb2";
-			};
-
-			bsp_pins: mux-bsp {
-				groups = "bsp";
-				function = "bsp";
-			};
-
-			hsp1_pins: mux-hsp1 {
-				groups = "hsp1";
-				function = "hsp1";
-			};
-
-			hsp2_pins: mux-hsp2 {
-				groups = "hsp2";
-				function = "hsp2";
-			};
-
-			r1err_pins: mux-r1err {
-				groups = "r1err";
-				function = "r1err";
-			};
-
-			r1md_pins: mux-r1md {
-				groups = "r1md";
-				function = "r1md";
-			};
-
-			rmii2_pins: mux-rmii2 {
-				groups = "rmii2";
-				function = "rmii2";
-			};
-
-			r2err_pins: mux-r2err {
-				groups = "r2err";
-				function = "r2err";
-			};
-
-			r2md_pins: mux-r2md {
-				groups = "r2md";
-				function = "r2md";
-			};
-
-			kbcc_pins: mux-kbcc {
-				groups = "kbcc";
-				function = "kbcc";
-			};
-
-			dvo0_pins: mux-dvo0 {
-				groups = "dvo";
-				function = "dvo0";
-			};
-
-			dvo3_pins: mux-dvo3 {
-				groups = "dvo";
-				function = "dvo3";
-			};
-
-			clko_pins: mux-clko {
-				groups = "clko";
-				function = "clko";
-			};
-
-			smi_pins: mux-smi {
-				groups = "smi";
-				function = "smi";
-			};
-
-			uinc_pins: mux-uinc {
-				groups = "uinc";
-				function = "uinc";
-			};
-
-			gspi_pins: mux-gspi {
-				groups = "gspi";
-				function = "gspi";
-			};
-
-			mben_pins: mux-mben {
-				groups = "mben";
-				function = "mben";
-			};
-
-			xcs2_pins: mux-xcs2 {
-				groups = "xcs2";
-				function = "xcs2";
-			};
-
-			xcs1_pins: mux-xcs1 {
-				groups = "xcs1";
-				function = "xcs1";
-			};
-
-			sdio_pins: mux-sdio {
-				groups = "sdio";
-				function = "sdio";
-			};
-
-			sspi_pins: mux-sspi {
-				groups = "sspi";
-				function = "sspi";
-			};
-
-			fi0_pins: mux-fi0 {
-				groups = "fi0";
-				function = "fi0";
-			};
-
-			fi1_pins: mux-fi1 {
-				groups = "fi1";
-				function = "fi1";
-			};
-
-			fi2_pins: mux-fi2 {
-				groups = "fi2";
-				function = "fi2";
-			};
-
-			fi3_pins: mux-fi3 {
-				groups = "fi3";
-				function = "fi3";
-			};
-
-			fi4_pins: mux-fi4 {
-				groups = "fi4";
-				function = "fi4";
-			};
-
-			fi5_pins: mux-fi5 {
-				groups = "fi5";
-				function = "fi5";
-			};
-
-			fi6_pins: mux-fi6 {
-				groups = "fi6";
-				function = "fi6";
-			};
-
-			fi7_pins: mux-fi7 {
-				groups = "fi7";
-				function = "fi7";
-			};
-
-			fi8_pins: mux-fi8 {
-				groups = "fi8";
-				function = "fi8";
-			};
-
-			fi9_pins: mux-fi9 {
-				groups = "fi9";
-				function = "fi9";
-			};
-
-			fi10_pins: mux-fi10 {
-				groups = "fi10";
-				function = "fi10";
-			};
-
-			fi11_pins: mux-fi11 {
-				groups = "fi11";
-				function = "fi11";
-			};
-
-			fi12_pins: mux-fi12 {
-				groups = "fi12";
-				function = "fi12";
-			};
-
-			fi13_pins: mux-fi13 {
-				groups = "fi13";
-				function = "fi13";
-			};
-
-			fi14_pins: mux-fi14 {
-				groups = "fi14";
-				function = "fi14";
-			};
-
-			fi15_pins: mux-fi15 {
-				groups = "fi15";
-				function = "fi15";
-			};
-
-			pwm0_pins: mux-pwm0 {
-				groups = "pwm0";
-				function = "pwm0";
-			};
-
-			pwm1_pins: mux-pwm1 {
-				groups = "pwm1";
-				function = "pwm1";
-			};
-
-			pwm2_pins: mux-pwm2 {
-				groups = "pwm2";
-				function = "pwm2";
-			};
-
-			pwm3_pins: mux-pwm3 {
-				groups = "pwm3";
-				function = "pwm3";
-			};
-
-			pwm4_pins: mux-pwm4 {
-				groups = "pwm4";
-				function = "pwm4";
-			};
-
-			pwm5_pins: mux-pwm5 {
-				groups = "pwm5";
-				function = "pwm5";
-			};
-
-			pwm6_pins: mux-pwm6 {
-				groups = "pwm6";
-				function = "pwm6";
-			};
-
-			pwm7_pins: mux-pwm7 {
-				groups = "pwm7";
-				function = "pwm7";
-			};
-
-			hg0_pins: mux-hg0 {
-				groups = "hg0";
-				function = "hg0";
-			};
-
-			hg1_pins: mux-hg1 {
-				groups = "hg1";
-				function = "hg1";
-			};
-
-			hg2_pins: mux-hg2 {
-				groups = "hg2";
-				function = "hg2";
-			};
-
-			hg3_pins: mux-hg3 {
-				groups = "hg3";
-				function = "hg3";
-			};
-
-			hg4_pins: mux-hg4 {
-				groups = "hg4";
-				function = "hg4";
-			};
-
-			hg5_pins: mux-hg5 {
-				groups = "hg5";
-				function = "hg5";
-			};
-
-			hg6_pins: mux-hg6 {
-				groups = "hg6";
-				function = "hg6";
-			};
-
-			hg7_pins: mux-hg7 {
-				groups = "hg7";
-				function = "hg7";
-			};
-		};
-
-		fiu: spi-controller@c8000000 {
-			compatible = "nuvoton,wpcm450-fiu";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
-			reg-names = "control", "memory";
-			clocks = <&clk 0>;
-			nuvoton,shm = <&shm>;
-			status = "disabled";
-		};
-
-		shm: syscon@c8001000 {
-			compatible = "nuvoton,wpcm450-shm", "syscon";
-			reg = <0xc8001000 0x1000>;
-			reg-io-width = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/nuvoton/Makefile b/arch/arm/boot/dts/nuvoton/Makefile
new file mode 100644
index 0000000000000..89c157dad3123
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_NPCM7XX) += \
+	nuvoton-npcm730-gsj.dtb \
+	nuvoton-npcm730-gbs.dtb \
+	nuvoton-npcm730-kudo.dtb \
+	nuvoton-npcm750-evb.dtb \
+	nuvoton-npcm750-runbmc-olympus.dtb
+dtb-$(CONFIG_ARCH_WPCM450) += \
+	nuvoton-wpcm450-supermicro-x9sci-ln4f.dtb
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
new file mode 100644
index 0000000000000..c7b5ef15b7162
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
@@ -0,0 +1,1123 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
+// Copyright 2018 Google, Inc.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+#include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	/* external reference clock */
+	clk_refclk: clk_refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "refclk";
+	};
+
+	/* external reference clock for cpu. float in normal operation */
+	clk_sysbypck: clk_sysbypck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+		clock-output-names = "sysbypck";
+	};
+
+	/* external reference clock for MC. float in normal operation */
+	clk_mcbypck: clk_mcbypck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+		clock-output-names = "mcbypck";
+	};
+
+	 /* external clock signal rg1refck, supplied by the phy */
+	clk_rg1refck: clk_rg1refck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_rg1refck";
+	};
+
+	 /* external clock signal rg2refck, supplied by the phy */
+	clk_rg2refck: clk_rg2refck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_rg2refck";
+	};
+
+	clk_xin: clk_xin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "clk_xin";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0x0 0xf0000000 0x00900000>;
+
+		scu: scu@3fe000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x3fe000 0x1000>;
+		};
+
+		l2: cache-controller@3fc000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x3fc000 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			clocks = <&clk NPCM7XX_CLK_AXI>;
+			arm,shared-override;
+		};
+
+		gic: interrupt-controller@3ff000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x3ff000 0x1000>,
+				<0x3fe100 0x100>;
+		};
+
+		gcr: gcr@800000 {
+			compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd";
+			reg = <0x800000 0x1000>;
+		};
+
+		rst: rst@801000 {
+			compatible = "nuvoton,npcm750-rst", "syscon", "simple-mfd";
+			reg = <0x801000 0x6C>;
+		};
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		rstc: rstc@f0801000 {
+			compatible = "nuvoton,npcm750-reset";
+			reg = <0xf0801000 0x70>;
+			#reset-cells = <2>;
+			nuvoton,sysgcr = <&gcr>;
+		};
+
+		clk: clock-controller@f0801000 {
+			compatible = "nuvoton,npcm750-clk", "syscon";
+			#clock-cells = <1>;
+			clock-controller;
+			reg = <0xf0801000 0x1000>;
+			clock-names = "refclk", "sysbypck", "mcbypck";
+			clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
+		};
+
+		gmac0: eth@f0802000 {
+			device_type = "network";
+			compatible = "snps,dwmac";
+			reg = <0xf0802000 0x2000>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			ethernet = <0>;
+			clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
+			clock-names = "stmmaceth", "clk_gmac";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rg1_pins
+					&rg1mdio_pins>;
+			status = "disabled";
+		};
+
+		ehci1: usb@f0806000 {
+			compatible = "nuvoton,npcm750-ehci";
+			reg = <0xf0806000 0x1000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		fiu0: spi@fb000000 {
+			compatible = "nuvoton,npcm750-fiu";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfb000000 0x1000>;
+			reg-names = "control", "memory";
+			clocks = <&clk NPCM7XX_CLK_SPI0>;
+			clock-names = "clk_spi0";
+			status = "disabled";
+		};
+
+		fiu3: spi@c0000000 {
+			compatible = "nuvoton,npcm750-fiu";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc0000000 0x1000>;
+			reg-names = "control", "memory";
+			clocks = <&clk NPCM7XX_CLK_SPI3>;
+			clock-names = "clk_spi3";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi3_pins>;
+			status = "disabled";
+		};
+
+		fiux: spi@fb001000 {
+			compatible = "nuvoton,npcm750-fiu";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfb001000 0x1000>;
+			reg-names = "control", "memory";
+			clocks = <&clk NPCM7XX_CLK_SPIX>;
+			clock-names = "clk_spix";
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges = <0x0 0xf0000000 0x00300000>;
+
+			lpc_kcs: lpc_kcs@7000 {
+				compatible = "nuvoton,npcm750-lpc-kcs", "simple-mfd", "syscon";
+				reg = <0x7000 0x40>;
+				reg-io-width = <1>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x40>;
+
+				kcs1: kcs1@0 {
+					compatible = "nuvoton,npcm750-kcs-bmc";
+					reg = <0x0 0x40>;
+					interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+					kcs_chan = <1>;
+					status = "disabled";
+				};
+
+				kcs2: kcs2@0 {
+					compatible = "nuvoton,npcm750-kcs-bmc";
+					reg = <0x0 0x40>;
+					interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+					kcs_chan = <2>;
+					status = "disabled";
+				};
+
+				kcs3: kcs3@0 {
+					compatible = "nuvoton,npcm750-kcs-bmc";
+					reg = <0x0 0x40>;
+					interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+					kcs_chan = <3>;
+					status = "disabled";
+				};
+			};
+
+			spi0: spi@200000 {
+				compatible = "nuvoton,npcm750-pspi";
+				reg = <0x200000 0x1000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pspi1_pins>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk NPCM7XX_CLK_APB5>;
+				clock-names = "clk_apb5";
+				resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
+				status = "disabled";
+			};
+
+			spi1: spi@201000 {
+				compatible = "nuvoton,npcm750-pspi";
+				reg = <0x201000 0x1000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pspi2_pins>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk NPCM7XX_CLK_APB5>;
+				clock-names = "clk_apb5";
+				resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI2>;
+				status = "disabled";
+			};
+
+			timer0: timer@8000 {
+				compatible = "nuvoton,npcm750-timer";
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x8000 0x1C>;
+				clocks = <&clk NPCM7XX_CLK_TIMER>;
+			};
+
+			watchdog0: watchdog@801C {
+				compatible = "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x801C 0x4>;
+				status = "disabled";
+				clocks = <&clk NPCM7XX_CLK_TIMER>;
+			};
+
+			watchdog1: watchdog@901C {
+				compatible = "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x901C 0x4>;
+				status = "disabled";
+				clocks = <&clk NPCM7XX_CLK_TIMER>;
+			};
+
+			watchdog2: watchdog@a01C {
+				compatible = "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xa01C 0x4>;
+				status = "disabled";
+				clocks = <&clk NPCM7XX_CLK_TIMER>;
+			};
+
+			serial0: serial@1000 {
+				compatible = "nuvoton,npcm750-uart";
+				reg = <0x1000 0x1000>;
+				clocks = <&clk NPCM7XX_CLK_UART>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial1: serial@2000 {
+				compatible = "nuvoton,npcm750-uart";
+				reg = <0x2000 0x1000>;
+				clocks = <&clk NPCM7XX_CLK_UART>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial2: serial@3000 {
+				compatible = "nuvoton,npcm750-uart";
+				reg = <0x3000 0x1000>;
+				clocks = <&clk NPCM7XX_CLK_UART>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial3: serial@4000 {
+				compatible = "nuvoton,npcm750-uart";
+				reg = <0x4000 0x1000>;
+				clocks = <&clk NPCM7XX_CLK_UART>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			rng: rng@b000 {
+				compatible = "nuvoton,npcm750-rng";
+				reg = <0xb000 0x8>;
+				status = "disabled";
+			};
+
+			adc: adc@c000 {
+				compatible = "nuvoton,npcm750-adc";
+				reg = <0xc000 0x8>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk NPCM7XX_CLK_ADC>;
+				resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>;
+				status = "disabled";
+			};
+
+			pwm_fan: pwm-fan-controller@103000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nuvoton,npcm750-pwm-fan";
+				reg = <0x103000 0x2000>, <0x180000 0x8000>;
+				reg-names = "pwm", "fan";
+				clocks = <&clk NPCM7XX_CLK_APB3>,
+					<&clk NPCM7XX_CLK_APB4>;
+				clock-names = "pwm","fan";
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm0_pins &pwm1_pins
+						&pwm2_pins &pwm3_pins
+						&pwm4_pins &pwm5_pins
+						&pwm6_pins &pwm7_pins
+						&fanin0_pins &fanin1_pins
+						&fanin2_pins &fanin3_pins
+						&fanin4_pins &fanin5_pins
+						&fanin6_pins &fanin7_pins
+						&fanin8_pins &fanin9_pins
+						&fanin10_pins &fanin11_pins
+						&fanin12_pins &fanin13_pins
+						&fanin14_pins &fanin15_pins>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@80000 {
+				reg = <0x80000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb0_pins>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@81000 {
+				reg = <0x81000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb1_pins>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@82000 {
+				reg = <0x82000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb2_pins>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@83000 {
+				reg = <0x83000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb3_pins>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@84000 {
+				reg = <0x84000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb4_pins>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@85000 {
+				reg = <0x85000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb5_pins>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@86000 {
+				reg = <0x86000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb6_pins>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@87000 {
+				reg = <0x87000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb7_pins>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@88000 {
+				reg = <0x88000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb8_pins>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@89000 {
+				reg = <0x89000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb9_pins>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@8a000 {
+				reg = <0x8a000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb10_pins>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@8b000 {
+				reg = <0x8b000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb11_pins>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@8c000 {
+				reg = <0x8c000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb12_pins>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@8d000 {
+				reg = <0x8d000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb13_pins>;
+				status = "disabled";
+			};
+
+			i2c14: i2c@8e000 {
+				reg = <0x8e000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb14_pins>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@8f000 {
+				reg = <0x8f000 0x1000>;
+				compatible = "nuvoton,npcm750-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk NPCM7XX_CLK_APB2>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&smb15_pins>;
+				status = "disabled";
+			};
+		};
+	};
+
+	pinctrl: pinctrl@f0800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "nuvoton,npcm750-pinctrl", "syscon", "simple-mfd";
+		ranges = <0 0xf0010000 0x8000>;
+		gpio0: gpio@f0010000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x0 0x80>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+		};
+		gpio1: gpio@f0011000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x1000 0x80>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 32 32>;
+		};
+		gpio2: gpio@f0012000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x2000 0x80>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 64 32>;
+		};
+		gpio3: gpio@f0013000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x3000 0x80>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 96 32>;
+		};
+		gpio4: gpio@f0014000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x4000 0x80>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 128 32>;
+		};
+		gpio5: gpio@f0015000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x5000 0x80>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 160 32>;
+		};
+		gpio6: gpio@f0016000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x6000 0x80>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 192 32>;
+		};
+		gpio7: gpio@f0017000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x7000 0x80>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 224 32>;
+		};
+
+		iox1_pins: iox1-pins {
+			groups = "iox1";
+			function = "iox1";
+		};
+		iox2_pins: iox2-pins {
+			groups = "iox2";
+			function = "iox2";
+		};
+		smb1d_pins: smb1d-pins {
+			groups = "smb1d";
+			function = "smb1d";
+		};
+		smb2d_pins: smb2d-pins {
+			groups = "smb2d";
+			function = "smb2d";
+		};
+		lkgpo1_pins: lkgpo1-pins {
+			groups = "lkgpo1";
+			function = "lkgpo1";
+		};
+		lkgpo2_pins: lkgpo2-pins {
+			groups = "lkgpo2";
+			function = "lkgpo2";
+		};
+		ioxh_pins: ioxh-pins {
+			groups = "ioxh";
+			function = "ioxh";
+		};
+		gspi_pins: gspi-pins {
+			groups = "gspi";
+			function = "gspi";
+		};
+		smb5b_pins: smb5b-pins {
+			groups = "smb5b";
+			function = "smb5b";
+		};
+		smb5c_pins: smb5c-pins {
+			groups = "smb5c";
+			function = "smb5c";
+		};
+		lkgpo0_pins: lkgpo0-pins {
+			groups = "lkgpo0";
+			function = "lkgpo0";
+		};
+		pspi2_pins: pspi2-pins {
+			groups = "pspi2";
+			function = "pspi2";
+		};
+		smb4den_pins: smb4den-pins {
+			groups = "smb4den";
+			function = "smb4den";
+		};
+		smb4b_pins: smb4b-pins {
+			groups = "smb4b";
+			function = "smb4b";
+		};
+		smb4c_pins: smb4c-pins {
+			groups = "smb4c";
+			function = "smb4c";
+		};
+		smb15_pins: smb15-pins {
+			groups = "smb15";
+			function = "smb15";
+		};
+		smb4d_pins: smb4d-pins {
+			groups = "smb4d";
+			function = "smb4d";
+		};
+		smb14_pins: smb14-pins {
+			groups = "smb14";
+			function = "smb14";
+		};
+		smb5_pins: smb5-pins {
+			groups = "smb5";
+			function = "smb5";
+		};
+		smb4_pins: smb4-pins {
+			groups = "smb4";
+			function = "smb4";
+		};
+		smb3_pins: smb3-pins {
+			groups = "smb3";
+			function = "smb3";
+		};
+		spi0cs1_pins: spi0cs1-pins {
+			groups = "spi0cs1";
+			function = "spi0cs1";
+		};
+		spi0cs2_pins: spi0cs2-pins {
+			groups = "spi0cs2";
+			function = "spi0cs2";
+		};
+		spi0cs3_pins: spi0cs3-pins {
+			groups = "spi0cs3";
+			function = "spi0cs3";
+		};
+		smb3c_pins: smb3c-pins {
+			groups = "smb3c";
+			function = "smb3c";
+		};
+		smb3b_pins: smb3b-pins {
+			groups = "smb3b";
+			function = "smb3b";
+		};
+		bmcuart0a_pins: bmcuart0a-pins {
+			groups = "bmcuart0a";
+			function = "bmcuart0a";
+		};
+		uart1_pins: uart1-pins {
+			groups = "uart1";
+			function = "uart1";
+		};
+		jtag2_pins: jtag2-pins {
+			groups = "jtag2";
+			function = "jtag2";
+		};
+		bmcuart1_pins: bmcuart1-pins {
+			groups = "bmcuart1";
+			function = "bmcuart1";
+		};
+		uart2_pins: uart2-pins {
+			groups = "uart2";
+			function = "uart2";
+		};
+		bmcuart0b_pins: bmcuart0b-pins {
+			groups = "bmcuart0b";
+			function = "bmcuart0b";
+		};
+		r1err_pins: r1err-pins {
+			groups = "r1err";
+			function = "r1err";
+		};
+		r1md_pins: r1md-pins {
+			groups = "r1md";
+			function = "r1md";
+		};
+		smb3d_pins: smb3d-pins {
+			groups = "smb3d";
+			function = "smb3d";
+		};
+		fanin0_pins: fanin0-pins {
+			groups = "fanin0";
+			function = "fanin0";
+		};
+		fanin1_pins: fanin1-pins {
+			groups = "fanin1";
+			function = "fanin1";
+		};
+		fanin2_pins: fanin2-pins {
+			groups = "fanin2";
+			function = "fanin2";
+		};
+		fanin3_pins: fanin3-pins {
+			groups = "fanin3";
+			function = "fanin3";
+		};
+		fanin4_pins: fanin4-pins {
+			groups = "fanin4";
+			function = "fanin4";
+		};
+		fanin5_pins: fanin5-pins {
+			groups = "fanin5";
+			function = "fanin5";
+		};
+		fanin6_pins: fanin6-pins {
+			groups = "fanin6";
+			function = "fanin6";
+		};
+		fanin7_pins: fanin7-pins {
+			groups = "fanin7";
+			function = "fanin7";
+		};
+		fanin8_pins: fanin8-pins {
+			groups = "fanin8";
+			function = "fanin8";
+		};
+		fanin9_pins: fanin9-pins {
+			groups = "fanin9";
+			function = "fanin9";
+		};
+		fanin10_pins: fanin10-pins {
+			groups = "fanin10";
+			function = "fanin10";
+		};
+		fanin11_pins: fanin11-pins {
+			groups = "fanin11";
+			function = "fanin11";
+		};
+		fanin12_pins: fanin12-pins {
+			groups = "fanin12";
+			function = "fanin12";
+		};
+		fanin13_pins: fanin13-pins {
+			groups = "fanin13";
+			function = "fanin13";
+		};
+		fanin14_pins: fanin14-pins {
+			groups = "fanin14";
+			function = "fanin14";
+		};
+		fanin15_pins: fanin15-pins {
+			groups = "fanin15";
+			function = "fanin15";
+		};
+		pwm0_pins: pwm0-pins {
+			groups = "pwm0";
+			function = "pwm0";
+		};
+		pwm1_pins: pwm1-pins {
+			groups = "pwm1";
+			function = "pwm1";
+		};
+		pwm2_pins: pwm2-pins {
+			groups = "pwm2";
+			function = "pwm2";
+		};
+		pwm3_pins: pwm3-pins {
+			groups = "pwm3";
+			function = "pwm3";
+		};
+		r2_pins: r2-pins {
+			groups = "r2";
+			function = "r2";
+		};
+		r2err_pins: r2err-pins {
+			groups = "r2err";
+			function = "r2err";
+		};
+		r2md_pins: r2md-pins {
+			groups = "r2md";
+			function = "r2md";
+		};
+		ga20kbc_pins: ga20kbc-pins {
+			groups = "ga20kbc";
+			function = "ga20kbc";
+		};
+		smb5d_pins: smb5d-pins {
+			groups = "smb5d";
+			function = "smb5d";
+		};
+		lpc_pins: lpc-pins {
+			groups = "lpc";
+			function = "lpc";
+		};
+		espi_pins: espi-pins {
+			groups = "espi";
+			function = "espi";
+		};
+		rg1_pins: rg1-pins {
+			groups = "rg1";
+			function = "rg1";
+		};
+		rg1mdio_pins: rg1mdio-pins {
+			groups = "rg1mdio";
+			function = "rg1mdio";
+		};
+		rg2_pins: rg2-pins {
+			groups = "rg2";
+			function = "rg2";
+		};
+		ddr_pins: ddr-pins {
+			groups = "ddr";
+			function = "ddr";
+		};
+		smb0_pins: smb0-pins {
+			groups = "smb0";
+			function = "smb0";
+		};
+		smb1_pins: smb1-pins {
+			groups = "smb1";
+			function = "smb1";
+		};
+		smb2_pins: smb2-pins {
+			groups = "smb2";
+			function = "smb2";
+		};
+		smb2c_pins: smb2c-pins {
+			groups = "smb2c";
+			function = "smb2c";
+		};
+		smb2b_pins: smb2b-pins {
+			groups = "smb2b";
+			function = "smb2b";
+		};
+		smb1c_pins: smb1c-pins {
+			groups = "smb1c";
+			function = "smb1c";
+		};
+		smb1b_pins: smb1b-pins {
+			groups = "smb1b";
+			function = "smb1b";
+		};
+		smb8_pins: smb8-pins {
+			groups = "smb8";
+			function = "smb8";
+		};
+		smb9_pins: smb9-pins {
+			groups = "smb9";
+			function = "smb9";
+		};
+		smb10_pins: smb10-pins {
+			groups = "smb10";
+			function = "smb10";
+		};
+		smb11_pins: smb11-pins {
+			groups = "smb11";
+			function = "smb11";
+		};
+		sd1_pins: sd1-pins {
+			groups = "sd1";
+			function = "sd1";
+		};
+		sd1pwr_pins: sd1pwr-pins {
+			groups = "sd1pwr";
+			function = "sd1pwr";
+		};
+		pwm4_pins: pwm4-pins {
+			groups = "pwm4";
+			function = "pwm4";
+		};
+		pwm5_pins: pwm5-pins {
+			groups = "pwm5";
+			function = "pwm5";
+		};
+		pwm6_pins: pwm6-pins {
+			groups = "pwm6";
+			function = "pwm6";
+		};
+		pwm7_pins: pwm7-pins {
+			groups = "pwm7";
+			function = "pwm7";
+		};
+		mmc8_pins: mmc8-pins {
+			groups = "mmc8";
+			function = "mmc8";
+		};
+		mmc_pins: mmc-pins {
+			groups = "mmc";
+			function = "mmc";
+		};
+		mmcwp_pins: mmcwp-pins {
+			groups = "mmcwp";
+			function = "mmcwp";
+		};
+		mmccd_pins: mmccd-pins {
+			groups = "mmccd";
+			function = "mmccd";
+		};
+		mmcrst_pins: mmcrst-pins {
+			groups = "mmcrst";
+			function = "mmcrst";
+		};
+		clkout_pins: clkout-pins {
+			groups = "clkout";
+			function = "clkout";
+		};
+		serirq_pins: serirq-pins {
+			groups = "serirq";
+			function = "serirq";
+		};
+		lpcclk_pins: lpcclk-pins {
+			groups = "lpcclk";
+			function = "lpcclk";
+		};
+		scipme_pins: scipme-pins {
+			groups = "scipme";
+			function = "scipme";
+		};
+		sci_pins: sci-pins {
+			groups = "sci";
+			function = "sci";
+		};
+		smb6_pins: smb6-pins {
+			groups = "smb6";
+			function = "smb6";
+		};
+		smb7_pins: smb7-pins {
+			groups = "smb7";
+			function = "smb7";
+		};
+		pspi1_pins: pspi1-pins {
+			groups = "pspi1";
+			function = "pspi1";
+		};
+		faninx_pins: faninx-pins {
+			groups = "faninx";
+			function = "faninx";
+		};
+		r1_pins: r1-pins {
+			groups = "r1";
+			function = "r1";
+		};
+		spi3_pins: spi3-pins {
+			groups = "spi3";
+			function = "spi3";
+		};
+		spi3cs1_pins: spi3cs1-pins {
+			groups = "spi3cs1";
+			function = "spi3cs1";
+		};
+		spi3quad_pins: spi3quad-pins {
+			groups = "spi3quad";
+			function = "spi3quad";
+		};
+		spi3cs2_pins: spi3cs2-pins {
+			groups = "spi3cs2";
+			function = "spi3cs2";
+		};
+		spi3cs3_pins: spi3cs3-pins {
+			groups = "spi3cs3";
+			function = "spi3cs3";
+		};
+		nprd_smi_pins: nprd-smi-pins {
+			groups = "nprd_smi";
+			function = "nprd_smi";
+		};
+		smb0b_pins: smb0b-pins {
+			groups = "smb0b";
+			function = "smb0b";
+		};
+		smb0c_pins: smb0c-pins {
+			groups = "smb0c";
+			function = "smb0c";
+		};
+		smb0den_pins: smb0den-pins {
+			groups = "smb0den";
+			function = "smb0den";
+		};
+		smb0d_pins: smb0d-pins {
+			groups = "smb0d";
+			function = "smb0d";
+		};
+		ddc_pins: ddc-pins {
+			groups = "ddc";
+			function = "ddc";
+		};
+		rg2mdio_pins: rg2mdio-pins {
+			groups = "rg2mdio";
+			function = "rg2mdio";
+		};
+		wdog1_pins: wdog1-pins {
+			groups = "wdog1";
+			function = "wdog1";
+		};
+		wdog2_pins: wdog2-pins {
+			groups = "wdog2";
+			function = "wdog2";
+		};
+		smb12_pins: smb12-pins {
+			groups = "smb12";
+			function = "smb12";
+		};
+		smb13_pins: smb13-pins {
+			groups = "smb13";
+			function = "smb13";
+		};
+		spix_pins: spix-pins {
+			groups = "spix";
+			function = "spix";
+		};
+		spixcs1_pins: spixcs1-pins {
+			groups = "spixcs1";
+			function = "spixcs1";
+		};
+		clkreq_pins: clkreq-pins {
+			groups = "clkreq";
+			function = "clkreq";
+		};
+		hgpio0_pins: hgpio0-pins {
+			groups = "hgpio0";
+			function = "hgpio0";
+		};
+		hgpio1_pins: hgpio1-pins {
+			groups = "hgpio1";
+			function = "hgpio1";
+		};
+		hgpio2_pins: hgpio2-pins {
+			groups = "hgpio2";
+			function = "hgpio2";
+		};
+		hgpio3_pins: hgpio3-pins {
+			groups = "hgpio3";
+			function = "hgpio3";
+		};
+		hgpio4_pins: hgpio4-pins {
+			groups = "hgpio4";
+			function = "hgpio4";
+		};
+		hgpio5_pins: hgpio5-pins {
+			groups = "hgpio5";
+			function = "hgpio5";
+		};
+		hgpio6_pins: hgpio6-pins {
+			groups = "hgpio6";
+			function = "hgpio6";
+		};
+		hgpio7_pins: hgpio7-pins {
+			groups = "hgpio7";
+			function = "hgpio7";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts
new file mode 100644
index 0000000000000..9e9eba8bad5e4
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts
@@ -0,0 +1,1135 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Quanta Computer Inc. George.Hung@quantatw.com
+
+/dts-v1/;
+#include "nuvoton-npcm730.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Quanta GBS Board (Device Tree)";
+	compatible = "quanta,gbs-bmc","nuvoton,npcm730";
+
+	aliases {
+		ethernet1 = &gmac0;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		i2c16 = &i2c0_slotPE0_0;
+		i2c17 = &i2c0_slotPE1_1;
+		i2c18 = &i2c0_slotUSB_2;
+		i2c19 = &i2c0_3;
+		i2c20 = &i2c5_i2cool_0;
+		i2c21 = &i2c5_i2cool_1;
+		i2c22 = &i2c5_i2cool_2;
+		i2c23 = &i2c5_hsbp_fru_3;
+		i2c24 = &i2c6_u2_15_0;
+		i2c25 = &i2c6_u2_14_1;
+		i2c26 = &i2c6_u2_13_2;
+		i2c27 = &i2c6_u2_12_3;
+		i2c28 = &i2c7_u2_11_0;
+		i2c29 = &i2c7_u2_10_1;
+		i2c30 = &i2c7_u2_9_2;
+		i2c31 = &i2c7_u2_8_3;
+		i2c32 = &i2c9_vddcr_cpu;
+		i2c33 = &i2c9_vddcr_soc;
+		i2c34 = &i2c9_vddio_efgh;
+		i2c35 = &i2c9_vddio_abcd;
+		i2c36 = &i2c10_u2_7_0;
+		i2c37 = &i2c10_u2_6_1;
+		i2c38 = &i2c10_u2_5_2;
+		i2c39 = &i2c10_u2_4_3;
+		i2c40 = &i2c11_clk_buf0_0;
+		i2c41 = &i2c11_clk_buf1_1;
+		i2c42 = &i2c11_clk_buf2_2;
+		i2c43 = &i2c11_clk_buf3_3;
+		i2c44 = &i2c14_u2_3_0;
+		i2c45 = &i2c14_u2_2_1;
+		i2c46 = &i2c14_u2_1_2;
+		i2c47 = &i2c14_u2_0_3;
+		fiu0 = &fiu0;
+		fiu1 = &fiu3;
+	};
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		sas-cable0 {
+			label = "sas-cable0";
+			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			linux,code = <73>;
+		};
+
+		sas-cable1 {
+			label = "sas-cable1";
+			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+			linux,code = <72>;
+		};
+
+		sas-cable2 {
+			label = "sas-cable2";
+			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <71>;
+		};
+
+		sas-cable3 {
+			label = "sas-cable3";
+			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+			linux,code = <70>;
+		};
+
+		sata0 {
+			label = "sata0";
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		hsbp-cable {
+			label = "hsbp-cable";
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			linux,code = <57>;
+		};
+
+		fanbd-cable {
+			label = "fanbd-cable";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			linux,code = <58>;
+		};
+
+		bp12v-cable {
+			label = "bp12v-cable";
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+			linux,code = <69>;
+		};
+
+		pe-slot0 {
+			label = "pe-slot0";
+			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+			linux,code = <120>;
+		};
+
+		pe-slot1 {
+			label = "pe-slot1";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			linux,code = <121>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 1>, <&adc 2>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat { /* gpio153 */
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		attention { /* gpio215 */
+			gpios = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		sys_boot_status { /* gpio216 */
+			gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+			retain-state-shutdown;
+		};
+
+		bmc_fault { /* gpio217 */
+			gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "panic";
+			panic-indicator;
+		};
+
+		led_u2_0_locate {
+			gpios = <&pca9535_ledlocate 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_1_locate {
+			gpios = <&pca9535_ledlocate 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_2_locate {
+			gpios = <&pca9535_ledlocate 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_3_locate {
+			gpios = <&pca9535_ledlocate 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_4_locate {
+			gpios = <&pca9535_ledlocate 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_5_locate {
+			gpios = <&pca9535_ledlocate 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_6_locate {
+			gpios = <&pca9535_ledlocate 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_7_locate {
+			gpios = <&pca9535_ledlocate 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_8_locate {
+			gpios = <&pca9535_ledlocate 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_9_locate {
+			gpios = <&pca9535_ledlocate 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_10_locate {
+			gpios = <&pca9535_ledlocate 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_11_locate {
+			gpios = <&pca9535_ledlocate 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_12_locate {
+			gpios = <&pca9535_ledlocate 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_13_locate {
+			gpios = <&pca9535_ledlocate 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_14_locate {
+			gpios = <&pca9535_ledlocate 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_15_locate {
+			gpios = <&pca9535_ledlocate 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_0_fault {
+			gpios = <&pca9535_ledfault 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_1_fault {
+			gpios = <&pca9535_ledfault 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_2_fault {
+			gpios = <&pca9535_ledfault 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_3_fault {
+			gpios = <&pca9535_ledfault 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_4_fault {
+			gpios = <&pca9535_ledfault 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_5_fault {
+			gpios = <&pca9535_ledfault 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_6_fault {
+			gpios = <&pca9535_ledfault 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_7_fault {
+			gpios = <&pca9535_ledfault 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_8_fault {
+			gpios = <&pca9535_ledfault 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_9_fault {
+			gpios = <&pca9535_ledfault 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_10_fault {
+			gpios = <&pca9535_ledfault 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_11_fault {
+			gpios = <&pca9535_ledfault 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_12_fault {
+			gpios = <&pca9535_ledfault 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_13_fault {
+			gpios = <&pca9535_ledfault 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_14_fault {
+			gpios = <&pca9535_ledfault 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_15_fault {
+			gpios = <&pca9535_ledfault 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+	};
+
+	seven-seg-disp {
+		compatible = "seven-seg-gpio-dev";
+		refresh-interval-ms = /bits/ 16 <600>;
+		clock-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		data-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		clear-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	pcie-slot {
+		pcie1: pcie-slot@1 {
+			label = "PE0";
+		};
+		pcie2: pcie-slot@2 {
+			label = "PE1";
+		};
+	};
+};
+
+&fiu0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0cs1_pins>;
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <2>;
+		label = "bmc";
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			u-boot@0 {
+				label = "u-boot";
+				reg = <0x0000000 0xf0000>;
+			};
+			image-descriptor@f0000 {
+				label = "image-descriptor";
+				reg = <0xf0000 0x10000>;
+			};
+			hoth-update@100000 {
+				label = "hoth-update";
+				reg = <0x100000 0x100000>;
+			};
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x500000>;
+			};
+			rofs@700000 {
+				label = "rofs";
+				reg = <0x700000 0x35f0000>;
+			};
+			rwfs@3cf0000 {
+				label = "rwfs";
+				reg = <0x3cf0000 0x300000>;
+			};
+			hoth-mailbox@3ff0000 {
+				label = "hoth-mailbox";
+				reg = <0x3ff0000 0x10000>;
+			};
+		};
+	};
+};
+
+&fiu3 {
+	pinctrl-0 = <&spi3_pins>, <&spi3cs1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
+		m25p,fast-read;
+		label = "pnor";
+	};
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
+		m25p,fast-read;
+	};
+};
+
+&gcr {
+	serial_port_mux: uart-mux-controller {
+		compatible = "mmio-mux";
+		#mux-control-cells = <1>;
+		mux-reg-masks = <0x38 0x07>;
+		idle-states = <2>; /* Serial port mode 3 (takeover) */
+	};
+
+	uart1_mode_mux: uart1-mode-mux-controller {
+		compatible = "mmio-mux";
+		#mux-control-cells = <1>;
+		mux-reg-masks = <0x64 0x01000000>;
+		idle-states = <0>; /* Set UART1 mode to normal (follow SPMOD) */
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	snps,eee-force-disable;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&watchdog1 {
+	status = "okay";
+};
+
+&rng {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&adc {
+	#io-channel-cells = <1>;
+	status = "okay";
+};
+
+&lpc_kcs {
+	kcs1: kcs1@0 {
+		status = "okay";
+	};
+
+	kcs2: kcs2@0 {
+		status = "okay";
+	};
+
+	kcs3: kcs3@0 {
+		status = "okay";
+	};
+};
+
+&spi1 {
+	cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; /* dummy - gpio147 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio224ol_pins &gpio227o_pins
+			&gpio228_pins>;
+	status = "okay";
+
+	jtag_master@0 {
+		compatible = "nuvoton,npcm750-jtag-master";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+		status = "okay";
+
+		pinctrl-names = "pspi", "gpio";
+		pinctrl-0 = <&pspi2_pins>;
+		pinctrl-1 = <&gpio224ol_pins &gpio227o_pins
+				&gpio228_pins>;
+
+		tck-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		tdi-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+		tdo-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+		tms-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+		reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+
+		i2c0_slotPE0_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			pcie-slot = &pcie1;
+		};
+
+		i2c0_slotPE1_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			pcie-slot = &pcie2;
+		};
+
+		i2c0_slotUSB_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pca9535_ifdet: pca9535-ifdet@24 {
+		compatible = "nxp,pca9535";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9535_pwren: pca9535-pwren@20 {
+		compatible = "nxp,pca9535";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"pwr_u2_3_en","pwr_u2_2_en",
+			"pwr_u2_1_en","pwr_u2_0_en",
+			"pwr_u2_7_en","pwr_u2_6_en",
+			"pwr_u2_5_en","pwr_u2_4_en",
+			"pwr_u2_11_en","pwr_u2_10_en",
+			"pwr_u2_9_en","pwr_u2_8_en",
+			"pwr_u2_15_en","pwr_u2_14_en",
+			"pwr_u2_13_en","pwr_u2_12_en";
+	};
+
+	pca9535_pwrgd: pca9535-pwrgd@21 {
+		compatible = "nxp,pca9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9535_ledlocate: pca9535-ledlocate@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+	};
+
+	pca9535_ledfault: pca9535-ledfault@23 {
+		compatible = "nxp,pca9535";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+	};
+
+	pca9535_pwrdisable: pca9535-pwrdisable@25 {
+		compatible = "nxp,pca9535";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"u2_3_pwr_dis","u2_2_pwr_dis",
+			"u2_1_pwr_dis","u2_0_pwr_dis",
+			"u2_7_pwr_dis","u2_6_pwr_dis",
+			"u2_5_pwr_dis","u2_4_pwr_dis",
+			"u2_11_pwr_dis","u2_10_pwr_dis",
+			"u2_9_pwr_dis","u2_8_pwr_dis",
+			"u2_15_pwr_dis","u2_14_pwr_dis",
+			"u2_13_pwr_dis","u2_12_pwr_dis";
+	};
+
+	pca9535_perst: pca9535-perst@26 {
+		compatible = "nxp,pca9535";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"u2_15_perst","u2_14_perst",
+			"u2_13_perst","u2_12_perst",
+			"u2_11_perst","u2_10_perst",
+			"u2_9_perst","u2_8_perst",
+			"u2_7_perst","u2_6_perst",
+			"u2_5_perst","u2_4_perst",
+			"u2_3_perst","u2_2_perst",
+			"u2_1_perst","u2_0_perst";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	sbtsi@4c {
+		compatible = "amd,sbtsi";
+		reg = <0x4c>;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	mb_fru@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		i2c5_i2cool_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			max31725@54 {
+				compatible = "maxim,max31725";
+				reg = <0x54>;
+				status = "okay";
+			};
+		};
+
+		i2c5_i2cool_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			max31725@55 {
+				compatible = "maxim,max31725";
+				reg = <0x55>;
+				status = "okay";
+			};
+		};
+
+		i2c5_i2cool_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			max31725@5d {
+				compatible = "maxim,max31725";
+				reg = <0x5d>;
+				status = "okay";
+			};
+			fan_fru@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c5_hsbp_fru_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			hsbp_fru@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+				status = "okay";
+			};
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@73 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x73>;
+		i2c-mux-idle-disconnect;
+
+		i2c6_u2_15_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c6_u2_14_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c6_u2_13_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c6_u2_12_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@72 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+
+		i2c7_u2_11_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c7_u2_10_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c7_u2_9_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c7_u2_8_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c8_adm1272: adm1272@10 {
+		compatible = "adi,adm1272";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+		shunt-resistor-micro-ohms = <300>;
+	};
+};
+
+&i2c9 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+
+		i2c9_vddcr_cpu: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			vrm@60 {
+				compatible = "isil,isl68137";
+				reg = <0x60>;
+			};
+		};
+
+		i2c9_vddcr_soc: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			vrm@61 {
+				compatible = "isil,isl68137";
+				reg = <0x61>;
+			};
+		};
+
+		i2c9_vddio_efgh: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			vrm@63 {
+				compatible = "isil,isl68137";
+				reg = <0x63>;
+			};
+		};
+
+		i2c9_vddio_abcd: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			vrm@45 {
+				compatible = "isil,isl68137";
+				reg = <0x45>;
+			};
+		};
+	};
+};
+
+&i2c10 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		i2c10_u2_7_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c10_u2_6_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c10_u2_5_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c10_u2_4_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c11 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@76 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		i2c11_clk_buf0_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c11_clk_buf1_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c11_clk_buf2_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c11_clk_buf3_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c12 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	max34451@4e {
+		compatible = "maxim,max34451";
+		reg = <0x4e>;
+	};
+	vrm@5d {
+		compatible = "isil,isl68137";
+		reg = <0x5d>;
+	};
+	vrm@5e {
+		compatible = "isil,isl68137";
+		reg = <0x5e>;
+	};
+};
+
+&i2c13 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c14 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c14_u2_3_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c14_u2_2_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c14_u2_1_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c14_u2_0_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&pwm_fan {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pwm0_pins &pwm1_pins
+		&pwm2_pins &pwm3_pins
+		&pwm4_pins
+		&fanin0_pins &fanin1_pins
+		&fanin2_pins &fanin3_pins
+		&fanin4_pins
+	>;
+	status = "okay";
+
+	fan@0 {
+		reg = <0x00>;
+		fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		fan-tach-ch = /bits/ 8 <0x01>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		fan-tach-ch = /bits/ 8 <0x02>;
+	};
+	fan@3 {
+		reg = <0x04>;
+		fan-tach-ch = /bits/ 8 <0x04>;
+	};
+	fan@4 {
+		reg = <0x03>;
+		fan-tach-ch = /bits/ 8 <0x03>;
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	gpio0: gpio@f0010000 {
+		/* POWER_OUT=gpio07, RESET_OUT=gpio06, PS_PWROK=gpio13 */
+		gpio-line-names =
+		/*0-31*/
+		"","","","","","","RESET_OUT","POWER_OUT",
+		"","","","","","PS_PWROK","","",
+		"","","","","","","","",
+		"","","","","","","","";
+	};
+	gpio1: gpio@f0011000 {
+		/* SIO_POWER_GOOD=gpio59 */
+		gpio-line-names =
+		/*32-63*/
+		"","","","","","","","",
+		"","","","","","","","",
+		"","","","","","","","",
+		"","","","SIO_POWER_GOOD","","","","";
+	};
+	gpio2: gpio@f0012000 {
+		bmc_usb_mux_oe_n {
+			gpio-hog;
+			gpios = <25 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "bmc-usb-mux-oe-n";
+		};
+		bmc_usb_mux_sel {
+			gpio-hog;
+			gpios = <26 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "bmc-usb-mux-sel";
+		};
+		bmc_usb2517_reset_n {
+			gpio-hog;
+			gpios = <27 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "bmc-usb2517-reset-n";
+		};
+	};
+	gpio3: gpio@f0013000 {
+		assert_cpu0_reset {
+			gpio-hog;
+			gpios = <14 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "assert-cpu0-reset";
+		};
+		assert_pwrok_cpu0_n {
+			gpio-hog;
+			gpios = <15 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "assert-pwrok-cpu0-n";
+		};
+		assert_cpu0_prochot {
+			gpio-hog;
+			gpios = <16 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "assert-cpu0-prochot";
+		};
+	};
+	gpio4: gpio@f0014000 {
+		/* POST_COMPLETE=gpio143 */
+		gpio-line-names =
+			/*128-159*/
+			"","","","","","","","",
+			"","","","","","","","POST_COMPLETE",
+			"","","","","","","","",
+			"","","","","","","","";
+	};
+	gpio5: gpio@f0015000 {
+		/* POWER_BUTTON=gpio177 */
+		gpio-line-names =
+			/*160-191*/
+			"","","","","","","","",
+			"","","","","","","","",
+			"","POWER_BUTTON","","","","","","",
+			"","","","","","","","";
+	};
+	gpio6: gpio@f0016000 {
+		/* SIO_S5=gpio199, RESET_BUTTON=gpio203 */
+		gpio-line-names =
+			/*192-223*/
+			"","","","","","","","SIO_S5",
+			"","","","RESET_BUTTON","","","","",
+			"","","","","","","","",
+			"","","","","","","","";
+	};
+
+	gpio224ol_pins: gpio224ol-pins {
+		pins = "GPIO224/SPIXCK";
+		bias-disable;
+		output-low;
+	};
+	gpio227o_pins: gpio227o-pins {
+		pins = "GPIO227/nSPIXCS0";
+		bias-disable;
+		output-high;
+	};
+	gpio228_pins: gpio228-pins {
+		pins = "GPIO228/nSPIXCS1";
+		bias-disable;
+		input-enable;
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj-gpio.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj-gpio.dtsi
new file mode 100644
index 0000000000000..53cfd15fa03f5
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj-gpio.dtsi
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
+
+/ {
+	pinctrl: pinctrl@f0800000 {
+		gpio0pp_pins: gpio0pp-pins {
+			pins = "GPIO0/IOX1DI";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio1pp_pins: gpio1pp-pins {
+			pins = "GPIO1/IOX1LD";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio2pp_pins: gpio2pp-pins {
+			pins = "GPIO2/IOX1CK";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio3pp_pins: gpio3pp-pins {
+			pins = "GPIO3/IOX1D0";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio4pp_pins: gpio4pp-pins {
+			pins = "GPIO4/IOX2DI/SMB1DSDA";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio5pp_pins: gpio5pp-pins {
+			pins = "GPIO5/IOX2LD/SMB1DSCL";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio6pp_pins: gpio6pp-pins {
+			pins = "GPIO6/IOX2CK/SMB2DSDA";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio7pp_pins: gpio7pp-pins {
+			pins = "GPIO7/IOX2D0/SMB2DSCL";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio8_pins: gpio8-pins {
+			pins = "GPIO8/LKGPO1";
+			bias-disable;
+			input-enable;
+		};
+		gpio9_pins: gpio9-pins {
+			pins = "GPIO9/LKGPO2";
+			bias-disable;
+			input-enable;
+		};
+		gpio10pp_pins: gpio10pp-pins {
+			pins = "GPIO10/IOXHLD";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio11pp_pins: gpio11pp-pins {
+			pins = "GPIO11/IOXHCK";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio12_pins: gpio12-pins {
+			pins = "GPIO12/GSPICK/SMB5BSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio13_pins: gpio13-pins {
+			pins = "GPIO13/GSPIDO/SMB5BSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio14_pins: gpio14-pins {
+			pins = "GPIO14/GSPIDI/SMB5CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio15od_pins: gpio15od-pins {
+			pins = "GPIO15/GSPICS/SMB5CSDA";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio17pp_pins: gpio17pp-pins {
+			pins = "GPIO17/PSPI2DI/SMB4DEN";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio18pp_pins: gpio18pp-pins {
+			pins = "GPIO18/PSPI2D0/SMB4BSDA";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio19pp_pins: gpio19pp-pins {
+			pins = "GPIO19/PSPI2CK/SMB4BSCL";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio24pp_pins: gpio24pp-pins {
+			pins = "GPIO24/IOXHDO";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio25pp_pins: gpio25pp-pins {
+			pins = "GPIO25/IOXHDI";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio37od_pins: gpio37od-pins {
+			pins = "GPIO37/SMB3CSDA";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio59pp_pins: gpio59pp-pins {
+			pins = "GPIO59/SMB3DSDA";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio60_pins: gpio60-pins {
+			pins = "GPIO60/SMB3DSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio72od_pins: gpio72od-pins {
+			pins = "GPIO72/FANIN8";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio73od_pins: gpio73od-pins {
+			pins = "GPIO73/FANIN9";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio74od_pins: gpio74od-pins {
+			pins = "GPIO74/FANIN10";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio75od_pins: gpio75od-pins {
+			pins = "GPIO75/FANIN11";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio76od_pins: gpio76od-pins {
+			pins = "GPIO76/FANIN12";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio77od_pins: gpio77od-pins {
+			pins = "GPIO77/FANIN13";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio78od_pins: gpio78od-pins {
+			pins = "GPIO78/FANIN14";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio79od_pins: gpio79od-pins {
+			pins = "GPIO79/FANIN15";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio83_pins: gpio83-pins {
+			pins = "GPIO83/PWM3";
+			bias-disable;
+			input-enable;
+		};
+		gpio84pp_pins: gpio84pp-pins {
+			pins = "GPIO84/R2TXD0";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio85pp_pins: gpio85pp-pins {
+			pins = "GPIO85/R2TXD1";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio86pp_pins: gpio86pp-pins {
+			pins = "GPIO86/R2TXEN";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio87pp_pins: gpio87pp-pins {
+			pins = "GPIO87/R2RXD0";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio88pp_pins: gpio88pp-pins {
+			pins = "GPIO88/R2RXD1";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio89pp_pins: gpio89pp-pins {
+			pins = "GPIO89/R2CRSDV";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio90pp_pins: gpio90pp-pins {
+			pins = "GPIO90/R2RXERR";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio91_pins: gpio91-pins {
+			pins = "GPIO91/R2MDC";
+			bias-disable;
+			input-enable;
+		};
+		gpio92_pins: gpio92-pins {
+			pins = "GPIO92/R2MDIO";
+			bias-disable;
+			input-enable;
+		};
+		gpio93pp_pins: gpio93pp-pins {
+			pins = "GPIO93/GA20/SMB5DSCL";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio94pp_pins: gpio94pp-pins {
+			pins = "GPIO94/nKBRST/SMB5DSDA";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio95_pins: gpio95-pins {
+			pins = "GPIO95/nLRESET/nESPIRST";
+			bias-disable;
+			input-enable;
+		};
+		gpio125pp_pins: gpio125pp-pins {
+			pins = "GPIO125/SMB1CSCL";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio126od_pins: gpio126od-pins {
+			pins = "GPIO126/SMB1BSDA";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio127od_pins: gpio127od-pins {
+			pins = "GPIO127/SMB1BSCL";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio136_pins: gpio136-pins {
+			pins = "GPIO136/SD1DT0";
+			bias-disable;
+			input-enable;
+		};
+		gpio137_pins: gpio137-pins {
+			pins = "GPIO137/SD1DT1";
+			bias-disable;
+			input-enable;
+		};
+		gpio141_pins: gpio141-pins {
+			pins = "GPIO141/SD1WP";
+			bias-disable;
+			input-enable;
+		};
+		gpio142od_pins: gpio142od-pins {
+			pins = "GPIO142/SD1CMD";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio143ol_pins: gpio143ol-pins {
+			pins = "GPIO143/SD1CD/SD1PWR";
+			bias-disable;
+			output-low;
+		};
+		gpio144_pins: gpio144-pins {
+			pins = "GPIO144/PWM4";
+			bias-disable;
+			input-enable;
+		};
+		gpio145_pins: gpio145-pins {
+			pins = "GPIO145/PWM5";
+			bias-disable;
+			input-enable;
+		};
+		gpio146_pins: gpio146-pins {
+			pins = "GPIO146/PWM6";
+			bias-disable;
+			input-enable;
+		};
+		gpio147_pins: gpio147-pins {
+			pins = "GPIO147/PWM7";
+			bias-disable;
+			input-enable;
+		};
+		gpio148_pins: gpio148-pins {
+			pins = "GPIO148/MMCDT4";
+			bias-disable;
+			input-enable;
+		};
+		gpio149_pins: gpio149-pins {
+			pins = "GPIO149/MMCDT5";
+			bias-disable;
+			input-enable;
+		};
+		gpio150_pins: gpio150-pins {
+			pins = "GPIO150/MMCDT6";
+			bias-disable;
+			input-enable;
+		};
+		gpio151_pins: gpio151-pins {
+			pins = "GPIO151/MMCDT7";
+			bias-disable;
+			input-enable;
+		};
+		gpio152_pins: gpio152-pins {
+			pins = "GPIO152/MMCCLK";
+			bias-disable;
+			input-enable;
+		};
+		gpio153_pins: gpio153-pins {
+			pins = "GPIO153/MMCWP";
+			bias-disable;
+			input-enable;
+		};
+		gpio154_pins: gpio154-pins {
+			pins = "GPIO154/MMCCMD";
+			bias-disable;
+			input-enable;
+		};
+		gpio155_pins: gpio155-pins {
+			pins = "GPIO155/nMMCCD/nMMCRST";
+			bias-disable;
+			input-enable;
+		};
+		gpio156_pins: gpio156-pins {
+			pins = "GPIO156/MMCDT0";
+			bias-disable;
+			input-enable;
+		};
+		gpio157_pins: gpio157-pins {
+			pins = "GPIO157/MMCDT1";
+			bias-disable;
+			input-enable;
+		};
+		gpio158_pins: gpio158-pins {
+			pins = "GPIO158/MMCDT2";
+			bias-disable;
+			input-enable;
+		};
+		gpio159_pins: gpio159-pins {
+			pins = "GPIO159/MMCDT3";
+			bias-disable;
+			input-enable;
+		};
+		gpio161_pins: gpio161-pins {
+			pins = "GPIO161/nLFRAME/nESPICS";
+			bias-disable;
+			input-enable;
+		};
+		gpio162_pins: gpio162-pins {
+			pins = "GPIO162/SERIRQ";
+			bias-disable;
+			input-enable;
+		};
+		gpio163_pins: gpio163-pins {
+			pins = "GPIO163/LCLK/ESPICLK";
+			bias-disable;
+			input-enable;
+		};
+		gpio164_pins: gpio164-pins {
+			pins = "GPIO164/LAD0/ESPI_IO0";
+			bias-disable;
+			input-enable;
+		};
+		gpio165_pins: gpio165-pins {
+			pins = "GPIO165/LAD1/ESPI_IO1";
+			bias-disable;
+			input-enable;
+		};
+		gpio166_pins: gpio166-pins {
+			pins = "GPIO166/LAD2/ESPI_IO2";
+			bias-disable;
+			input-enable;
+		};
+		gpio167_pins: gpio167-pins {
+			pins = "GPIO167/LAD3/ESPI_IO3";
+			bias-disable;
+			input-enable;
+		};
+		gpio168_pins: gpio168-pins {
+			pins = "GPIO168/nCLKRUN/nESPIALERT";
+			bias-disable;
+			input-enable;
+		};
+		gpio169_pins: gpio169-pins {
+			pins = "GPIO169/nSCIPME";
+			bias-disable;
+			input-enable;
+		};
+		gpio170_pins: gpio170-pins {
+			pins = "GPIO170/nSMI";
+			bias-disable;
+			input-enable;
+		};
+		gpio175od_pins: gpio175od-pins {
+			pins = "GPIO175/PSPI1CK/FANIN19";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio176od_pins: gpio176od-pins {
+			pins = "GPIO176/PSPI1DO/FANIN18";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio177_pins: gpio177-pins {
+			pins = "GPIO177/PSPI1DI/FANIN17";
+			bias-disable;
+			input-enable;
+		};
+		gpio190od_pins: gpio190od-pins {
+			pins = "GPIO190/nPRD_SMI";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio191_pins: gpio191-pins {
+			pins = "GPIO191";
+			bias-disable;
+			input-enable;
+		};
+		gpio192_pins: gpio192-pins {
+			pins = "GPIO192";
+			bias-disable;
+			input-enable;
+		};
+		gpio194pp_pins: gpio194pp-pins {
+			pins = "GPIO194/SMB0BSCL";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio195od_pins: gpio195od-pins {
+			pins = "GPIO195/SMB0BSDA";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio196od_pins: gpio196od-pins {
+			pins = "GPIO196/SMB0CSCL";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio197od_pins: gpio197od-pins {
+			pins = "GPIO197/SMB0DEN";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio198od_pins: gpio198od-pins {
+			pins = "GPIO198/SMB0DSDA";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio199od_pins: gpio199od-pins {
+			pins = "GPIO199/SMB0DSCL";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio200pp_pins: gpio200pp-pins {
+			pins = "GPIO200/R2CK";
+			bias-disable;
+			drive-push-pull;
+		};
+		gpio202od_pins: gpio202od-pins {
+			pins = "GPIO202/SMB0CSDA";
+			bias-disable;
+			drive-open-drain;
+		};
+		gpio203_pins: gpio203-pins {
+			pins = "GPIO203/FANIN16";
+			bias-disable;
+			input-enable;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts
new file mode 100644
index 0000000000000..2a394cc15284c
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 Quanta Computer lnc. Fran.Hsu@quantatw.com
+
+/dts-v1/;
+#include "nuvoton-npcm730.dtsi"
+#include "nuvoton-npcm730-gsj-gpio.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Quanta GSJ Board (Device Tree v12)";
+	compatible = "nuvoton,npcm750";
+
+	aliases {
+		ethernet1 = &gmac0;
+		serial3 = &serial3;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c15 = &i2c15;
+		fiu0 = &fiu0;
+	};
+
+	chosen {
+		stdout-path = &serial3;
+	};
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-bmc-live {
+			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		LED_U2_0_LOCATE {
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_1_LOCATE {
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_2_LOCATE {
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_3_LOCATE {
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_4_LOCATE {
+			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_5_LOCATE {
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_BMC_TRAY_PWRGD {
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_7_FAULT {
+			gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_6_LOCATE {
+			gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_7_LOCATE {
+			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_0_FAULT {
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_1_FAULT {
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_2_FAULT {
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_3_FAULT {
+			gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_4_FAULT {
+			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_5_FAULT {
+			gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		LED_U2_6_FAULT {
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&fiu0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0cs1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bmc@0{
+				label = "bmc";
+				reg = <0x000000 0x2000000>;
+			};
+			u-boot@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x80000>;
+				read-only;
+			};
+			u-boot-env@100000{
+				label = "u-boot-env";
+				reg = <0x00100000 0x40000>;
+			};
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x0200000 0x600000>;
+			};
+			rofs@800000 {
+				label = "rofs";
+				reg = <0x800000 0x1400000>;
+			};
+			rwfs@1c00000 {
+				label = "rwfs";
+				reg = <0x1c00000 0x300000>;
+			};
+			reserved@1f00000 {
+				label = "reserved";
+				reg = <0x1f00000 0x100000>;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&watchdog1 {
+	status = "okay";
+};
+
+&rng {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	lm75@5c {
+		compatible = "maxim,max31725";
+		reg = <0x5c>;
+		status = "okay";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	lm75@5c {
+		compatible = "maxim,max31725";
+		reg = <0x5c>;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	lm75@5c {
+		compatible = "maxim,max31725";
+		reg = <0x5c>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	lm75@5c {
+		compatible = "maxim,max31725";
+		reg = <0x5c>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@55 {
+		compatible = "atmel,24c64";
+		reg = <0x55>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@55 {
+		compatible = "atmel,24c64";
+		reg = <0x55>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/* P12V Quarter Brick DC/DC Power Module Q54SH12050 @60 */
+	power-brick@36 {
+		compatible = "delta,dps800";
+		reg = <0x36>;
+	};
+
+	hotswap@15 {
+		compatible = "ti,lm5066i";
+		reg = <0x15>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	ucd90160@6b {
+		compatible = "ti,ucd90160";
+		reg = <0x6b>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		i2c_u20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_u21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_u22: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_u23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c_u24: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c_u25: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c_u26: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c_u27: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&pwm_fan {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins &pwm1_pins &pwm2_pins
+			&fanin0_pins &fanin1_pins
+			&fanin2_pins &fanin3_pins
+			&fanin4_pins &fanin5_pins>;
+	status = "okay";
+
+	fan@0 {
+		reg = <0x00>;
+		fan-tach-ch = /bits/ 8 <0x00 0x01>;
+		cooling-levels = <127 255>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		fan-tach-ch = /bits/ 8 <0x02 0x03>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		fan-tach-ch = /bits/ 8 <0x04 0x05>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			/* GPI pins*/
+			&gpio8_pins
+			&gpio9_pins
+			&gpio12_pins
+			&gpio13_pins
+			&gpio14_pins
+			&gpio60_pins
+			&gpio83_pins
+			&gpio91_pins
+			&gpio92_pins
+			&gpio95_pins
+			&gpio136_pins
+			&gpio137_pins
+			&gpio141_pins
+			&gpio144_pins
+			&gpio145_pins
+			&gpio146_pins
+			&gpio147_pins
+			&gpio148_pins
+			&gpio149_pins
+			&gpio150_pins
+			&gpio151_pins
+			&gpio152_pins
+			&gpio153_pins
+			&gpio154_pins
+			&gpio155_pins
+			&gpio156_pins
+			&gpio157_pins
+			&gpio158_pins
+			&gpio159_pins
+			&gpio161_pins
+			&gpio162_pins
+			&gpio163_pins
+			&gpio164_pins
+			&gpio165_pins
+			&gpio166_pins
+			&gpio167_pins
+			&gpio168_pins
+			&gpio169_pins
+			&gpio170_pins
+			&gpio177_pins
+			&gpio191_pins
+			&gpio192_pins
+			&gpio203_pins
+			/* GPO pins*/
+			&gpio0pp_pins
+			&gpio1pp_pins
+			&gpio2pp_pins
+			&gpio3pp_pins
+			&gpio4pp_pins
+			&gpio5pp_pins
+			&gpio6pp_pins
+			&gpio7pp_pins
+			&gpio10pp_pins
+			&gpio11pp_pins
+			&gpio15od_pins
+			&gpio17pp_pins
+			&gpio18pp_pins
+			&gpio19pp_pins
+			&gpio24pp_pins
+			&gpio25pp_pins
+			&gpio37od_pins
+			&gpio59pp_pins
+			&gpio72od_pins
+			&gpio73od_pins
+			&gpio74od_pins
+			&gpio75od_pins
+			&gpio76od_pins
+			&gpio77od_pins
+			&gpio78od_pins
+			&gpio79od_pins
+			&gpio84pp_pins
+			&gpio85pp_pins
+			&gpio86pp_pins
+			&gpio87pp_pins
+			&gpio88pp_pins
+			&gpio89pp_pins
+			&gpio90pp_pins
+			&gpio93pp_pins
+			&gpio94pp_pins
+			&gpio125pp_pins
+			&gpio126od_pins
+			&gpio127od_pins
+			&gpio142od_pins
+			&gpio143ol_pins
+			&gpio175od_pins
+			&gpio176od_pins
+			&gpio190od_pins
+			&gpio194pp_pins
+			&gpio195od_pins
+			&gpio196od_pins
+			&gpio197od_pins
+			&gpio198od_pins
+			&gpio199od_pins
+			&gpio200pp_pins
+			&gpio202od_pins
+			>;
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
new file mode 100644
index 0000000000000..f7b38bee039bc
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
@@ -0,0 +1,826 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Fii USA Inc.
+
+/dts-v1/;
+#include "nuvoton-npcm730.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Fii Kudo Board";
+	compatible = "fii,kudo", "nuvoton,npcm730";
+
+	aliases {
+		ethernet1 = &gmac0;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		fiu0 = &fiu0;
+		fiu1 = &fiu3;
+	};
+
+	chosen {
+		stdout-path = &serial3;
+	};
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+	jtag_master {
+		compatible = "nuvoton,npcm750-jtag-master";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		// dev/jtag0
+		dev-num = <0>;
+		// pspi or gpio
+		mode = "pspi";
+
+		// pspi2
+		pspi-controller = <2>;
+		reg = <0xf0201000 0x1000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk NPCM7XX_CLK_APB5>;
+
+		// TCK, TDI, TDO, TMS
+		jtag-gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>,
+				<&gpio0 18 GPIO_ACTIVE_HIGH>,
+				<&gpio0 17 GPIO_ACTIVE_HIGH>,
+				<&gpio0 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "heartbeat";
+			gpios = <&gpio0 14 1>;
+		};
+	};
+
+	pinctrl: pinctrl@f0800000 {
+		gpio61oh_pins: gpio61oh-pins {
+			pins = "GPO61/nDTR1_BOUT1/STRAP6";
+			bias-disable;
+			output-high;
+		};
+		gpio62oh_pins: gpio62oh-pins {
+			pins = "GPO62/nRTST1/STRAP5";
+			bias-disable;
+			output-high;
+		};
+		gpio161ol_pins: gpio161ol-pins {
+			pins = "GPIO161/nLFRAME/nESPICS";
+			bias-disable;
+			output-low;
+		};
+		gpio163i_pins: gpio163i-pins {
+			pins = "GPIO163/LCLK/ESPICLK";
+			bias-disable;
+			input-enable;
+		};
+		gpio167ol_pins: gpio167ol-pins {
+			pins = "GPIO167/LAD3/ESPI_IO3";
+			bias-disable;
+			output-low;
+		};
+		gpio95i_pins: gpio95i-pins {
+			pins = "GPIO95/nLRESET/nESPIRST";
+			bias-disable;
+			input-enable;
+		};
+		gpio65ol_pins: gpio65ol-pins {
+			pins = "GPIO65/FANIN1";
+			bias-disable;
+			output-low;
+		};
+		gpio66oh_pins: gpio66oh-pins {
+			pins = "GPIO66/FANIN2";
+			bias-disable;
+			output-high;
+		};
+		gpio67oh_pins: gpio67oh-pins {
+			pins = "GPIO67/FANIN3";
+			bias-disable;
+			output-high;
+		};
+		gpio68ol_pins: gpio68ol-pins {
+			pins = "GPIO68/FANIN4";
+			bias-disable;
+			output-low;
+		};
+		gpio69i_pins: gpio69i-pins {
+			pins = "GPIO69/FANIN5";
+			bias-disable;
+			input-enable;
+		};
+		gpio70ol_pins: gpio70ol-pins {
+			pins = "GPIO70/FANIN6";
+			bias-disable;
+			output-low;
+		};
+		gpio71i_pins: gpio71i-pins {
+			pins = "GPIO71/FANIN7";
+			bias-disable;
+			input-enable;
+		};
+		gpio72i_pins: gpio72i-pins {
+			pins = "GPIO72/FANIN8";
+			bias-disable;
+			input-enable;
+		};
+		gpio73i_pins: gpio73i-pins {
+			pins = "GPIO73/FANIN9";
+			bias-disable;
+			input-enable;
+		};
+		gpio74i_pins: gpio74i-pins {
+			pins = "GPIO74/FANIN10";
+			bias-disable;
+			input-enable;
+		};
+		gpio75i_pins: gpio75i-pins {
+			pins = "GPIO75/FANIN11";
+			bias-disable;
+			input-enable;
+		};
+		gpio76i_pins: gpio76i-pins {
+			pins = "GPIO76/FANIN12";
+			bias-disable;
+			input-enable;
+		};
+		gpio77i_pins: gpio77i-pins {
+			pins = "GPIO77/FANIN13";
+			bias-disable;
+			input-enable;
+		};
+		gpio78i_pins: gpio78i-pins {
+			pins = "GPIO78/FANIN14";
+			bias-disable;
+			input-enable;
+		};
+		gpio79ol_pins: gpio79ol-pins {
+			pins = "GPIO79/FANIN15";
+			bias-disable;
+			output-low;
+		};
+		gpio80oh_pins: gpio80oh-pins {
+			pins = "GPIO80/PWM0";
+			bias-disable;
+			output-high;
+		};
+		gpio81i_pins: gpio81i-pins {
+			pins = "GPIO81/PWM1";
+			bias-disable;
+			input-enable;
+		};
+		gpio82i_pins: gpio82i-pins {
+			pins = "GPIO82/PWM2";
+			bias-disable;
+			input-enable;
+		};
+		gpio83i_pins: gpio83i-pins {
+			pins = "GPIO83/PWM3";
+			bias-disable;
+			input-enable;
+		};
+		gpio144i_pins: gpio144i-pins {
+			pins = "GPIO144/PWM4";
+			bias-disable;
+			input-enable;
+		};
+		gpio145i_pins: gpio145i-pins {
+			pins = "GPIO145/PWM5";
+			bias-disable;
+			input-enable;
+		};
+		gpio146i_pins: gpio146i-pins {
+			pins = "GPIO146/PWM6";
+			bias-disable;
+			input-enable;
+		};
+		gpio147oh_pins: gpio147oh-pins {
+			pins = "GPIO147/PWM7";
+			bias-disable;
+			output-high;
+		};
+		gpio168ol_pins: gpio168ol-pins {
+			pins = "GPIO168/nCLKRUN/nESPIALERT";
+			bias-disable;
+			output-low;
+		};
+		gpio169oh_pins: gpio169oh-pins {
+			pins = "GPIO169/nSCIPME";
+			bias-disable;
+			output-high;
+		};
+		gpio170ol_pins: gpio170ol-pins {
+			pins = "GPIO170/nSMI";
+			bias-disable;
+			output-low;
+		};
+		gpio218oh_pins: gpio218oh-pins {
+			pins = "GPIO218/nWDO1";
+			bias-disable;
+			output-high;
+		};
+		gpio37i_pins: gpio37i-pins {
+			pins = "GPIO37/SMB3CSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio38i_pins: gpio38i-pins {
+			pins = "GPIO38/SMB3CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio39i_pins: gpio39i-pins {
+			pins = "GPIO39/SMB3BSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio40i_pins: gpio40i-pins {
+			pins = "GPIO40/SMB3BSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio121i_pins: gpio121i-pins {
+			pins = "GPIO121/SMB2CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio122i_pins: gpio122i-pins {
+			pins = "GPIO122/SMB2BSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio123i_pins: gpio123i-pins {
+			pins = "GPIO123/SMB2BSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio124i_pins: gpio124i-pins {
+			pins = "GPIO124/SMB1CSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio125i_pins: gpio125i-pins {
+			pins = "GPIO125/SMB1CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio126i_pins: gpio126i-pins {
+			pins = "GPIO126/SMB1BSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio127i_pins: gpio127i-pins {
+			pins = "GPIO127/SMB1BSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio136i_pins: gpio136i-pins {
+			pins = "GPIO136/SD1DT0";
+			bias-disable;
+			input-enable;
+		};
+		gpio137oh_pins: gpio137oh-pins {
+			pins = "GPIO137/SD1DT1";
+			bias-disable;
+			output-high;
+		};
+		gpio138i_pins: gpio138i-pins {
+			pins = "GPIO138/SD1DT2";
+			bias-disable;
+			input-enable;
+		};
+		gpio139i_pins: gpio139i-pins {
+			pins = "GPIO139/SD1DT3";
+			bias-disable;
+			input-enable;
+		};
+		gpio140i_pins: gpio140i-pins {
+			pins = "GPIO140/SD1CLK";
+			bias-disable;
+			input-enable;
+		};
+		gpio141i_pins: gpio141i-pins {
+			pins = "GPIO141/SD1WP";
+			bias-disable;
+			input-enable;
+		};
+		gpio190oh_pins: gpio190oh-pins {
+			pins = "GPIO190/nPRD_SMI";
+			bias-disable;
+			output-high;
+		};
+		gpio191oh_pins: gpio191oh-pins {
+			pins = "GPIO191";
+			bias-disable;
+			output-high;
+		};
+		gpio195ol_pins: gpio195ol-pins {
+			pins = "GPIO195/SMB0BSDA";
+			bias-disable;
+			output-low;
+		};
+		gpio196ol_pins: gpio196ol-pins {
+			pins = "GPIO196/SMB0CSCL";
+			bias-disable;
+			output-low;
+		};
+		gpio199i_pins: gpio199i-pins {
+			pins = "GPIO199/SMB0DSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio202ol_pins: gpio202ol-pins {
+			pins = "GPIO202/SMB0CSDA";
+			bias-disable;
+			output-low;
+		};
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	snps,eee-force-disable;
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fiu0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0cs1_pins>;
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-rx-bus-width = <2>;
+		label = "bmc";
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			u-boot@0 {
+				label = "u-boot";
+				reg = <0x0000000 0xC0000>;
+				read-only;
+			};
+			u-boot-env@100000{
+				label = "u-boot-env";
+				reg = <0x00100000 0x40000>;
+			};
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x0200000 0x600000>;
+			};
+			rofs@800000 {
+				label = "rofs";
+				reg = <0x800000 0x3500000>;
+			};
+			rwfs@3d00000 {
+				label = "rwfs";
+				reg = <0x3d00000 0x300000>;
+			};
+		};
+	};
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <1>;
+		spi-max-frequency = <5000000>;
+		spi-rx-bus-width = <2>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			spare1@0 {
+				label = "spi0-cs1-spare1";
+				reg = <0x0 0x800000>;
+			};
+			spare2@800000 {
+				label = "spi0-cs1-spare2";
+				reg = <0x800000 0x0>;
+			};
+		};
+	};
+};
+
+&fiu3 {
+	pinctrl-0 = <&spi3_pins>;
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-rx-bus-width = <2>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			system1@0 {
+				label = "bios";
+				reg = <0x0 0x0>;
+			};
+			system2@800000 {
+				label = "spi3-system2";
+				reg = <0x800000 0x0>;
+			};
+		};
+	};
+};
+
+&watchdog1 {
+	status = "okay";
+};
+
+&rng {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&adc {
+	#io-channel-cells = <1>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			// Rear-Fan
+			max31790@58 {
+				compatible = "maxim,max31790";
+				reg = <0x58>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			// Mid-Fan
+			max31790@58 {
+				compatible = "maxim,max31790";
+				reg = <0x58>;
+			};
+		};
+
+		i2c-bus@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			// INLET1_T
+			lm75@5c {
+				compatible = "ti,lm75";
+				reg = <0x5c>;
+			};
+		};
+
+		i2c-bus@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			// OUTLET1_T
+			lm75@5c {
+				compatible = "ti,lm75";
+				reg = <0x5c>;
+			};
+		};
+
+		i2c-bus@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			// OUTLET2_T
+			lm75@5c {
+				compatible = "ti,lm75";
+				reg = <0x5c>;
+			};
+		};
+
+		i2c-bus@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			// OUTLET3_T
+			lm75@5c {
+				compatible = "ti,lm75";
+				reg = <0x5c>;
+			};
+		};
+	};
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		i2c-bus@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			// STB-T
+			pmbus@74 {
+				compatible = "pmbus";
+				reg = <0x74>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	smpro@4f {
+		compatible = "ampere,smpro";
+		reg = <0x4f>;
+	};
+
+	smpro@4e {
+		compatible = "ampere,smpro";
+		reg = <0x4e>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		i2c-bus@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			// ADC sensors
+			adm1266@40 {
+				compatible = "adi,adm1266";
+				reg = <0x40>;
+			};
+		};
+
+		i2c-bus@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// ADC sensors
+			adm1266@41 {
+				compatible = "adi,adm1266";
+				reg = <0x41>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		i2c-bus@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			// M2_ZONE_T
+			lm75@28 {
+				compatible = "ti,lm75";
+				reg = <0x28>;
+			};
+		};
+
+		i2c-bus@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			// BATT_ZONE_T
+			lm75@29 {
+				compatible = "ti,lm75";
+				reg = <0x29>;
+			};
+		};
+
+		i2c-bus@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			// NBM1_ZONE_T
+			lm75@28 {
+				compatible = "ti,lm75";
+				reg = <0x28>;
+			};
+		};
+		i2c-bus@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			// NBM2_ZONE_T
+			lm75@29 {
+				compatible = "ti,lm75";
+				reg = <0x29>;
+			};
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&spi0 {
+	cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&gpio61oh_pins
+			&gpio62oh_pins
+			&gpio161ol_pins
+			&gpio163i_pins
+			&gpio167ol_pins
+			&gpio95i_pins
+			&gpio65ol_pins
+			&gpio66oh_pins
+			&gpio67oh_pins
+			&gpio68ol_pins
+			&gpio69i_pins
+			&gpio70ol_pins
+			&gpio71i_pins
+			&gpio72i_pins
+			&gpio73i_pins
+			&gpio74i_pins
+			&gpio75i_pins
+			&gpio76i_pins
+			&gpio77i_pins
+			&gpio78i_pins
+			&gpio79ol_pins
+			&gpio80oh_pins
+			&gpio81i_pins
+			&gpio82i_pins
+			&gpio83i_pins
+			&gpio144i_pins
+			&gpio145i_pins
+			&gpio146i_pins
+			&gpio147oh_pins
+			&gpio168ol_pins
+			&gpio169oh_pins
+			&gpio170ol_pins
+			&gpio218oh_pins
+			&gpio37i_pins
+			&gpio38i_pins
+			&gpio39i_pins
+			&gpio40i_pins
+			&gpio121i_pins
+			&gpio122i_pins
+			&gpio123i_pins
+			&gpio124i_pins
+			&gpio125i_pins
+			&gpio126i_pins
+			&gpio127i_pins
+			&gpio136i_pins
+			&gpio137oh_pins
+			&gpio138i_pins
+			&gpio139i_pins
+			&gpio140i_pins
+			&gpio141i_pins
+			&gpio190oh_pins
+			&gpio191oh_pins
+			&gpio195ol_pins
+			&gpio196ol_pins
+			&gpio199i_pins
+			&gpio202ol_pins
+			>;
+};
+
+&gcr {
+	serial_port_mux: mux-controller {
+		compatible = "mmio-mux";
+		#mux-control-cells = <1>;
+
+		mux-reg-masks = <0x38 0x07>;
+		idle-states = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730.dtsi
new file mode 100644
index 0000000000000..86ec12ec2b507
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Nuvoton Technology
+
+#include "nuvoton-common-npcm7xx.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "nuvoton,npcm750-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+		};
+	};
+
+	soc {
+		timer@3fe600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x3fe600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&clk NPCM7XX_CLK_AHB>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
new file mode 100644
index 0000000000000..f53d45fa1de87
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
+// Copyright 2018 Google, Inc.
+
+/dts-v1/;
+#include "nuvoton-npcm750.dtsi"
+#include "dt-bindings/gpio/gpio.h"
+#include "nuvoton-npcm750-pincfg-evb.dtsi"
+
+/ {
+	model = "Nuvoton npcm750 Development Board (Device Tree)";
+	compatible = "nuvoton,npcm750-evb", "nuvoton,npcm750";
+
+	aliases {
+		ethernet2 = &gmac0;
+		ethernet3 = &gmac1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		fiu0 = &fiu0;
+		fiu1 = &fiu3;
+		fiu2 = &fiux;
+	};
+
+	chosen {
+		stdout-path = &serial3;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gmac1 {
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fiu0 {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-rx-bus-width = <2>;
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bbuboot1@0 {
+				label = "bb-uboot-1";
+				reg = <0x0000000 0x80000>;
+				read-only;
+				};
+			bbuboot2@80000 {
+				label = "bb-uboot-2";
+				reg = <0x0080000 0x80000>;
+				read-only;
+				};
+			envparam@100000 {
+				label = "env-param";
+				reg = <0x0100000 0x40000>;
+				read-only;
+				};
+			spare@140000 {
+				label = "spare";
+				reg = <0x0140000 0xC0000>;
+				};
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x0200000 0x400000>;
+				};
+			rootfs@600000 {
+				label = "rootfs";
+				reg = <0x0600000 0x700000>;
+				};
+			spare1@d00000 {
+				label = "spare1";
+				reg = <0x0D00000 0x200000>;
+				};
+			spare2@f00000 {
+				label = "spare2";
+				reg = <0x0F00000 0x200000>;
+				};
+			spare3@1100000 {
+				label = "spare3";
+				reg = <0x1100000 0x200000>;
+				};
+			spare4@1300000 {
+				label = "spare4";
+				reg = <0x1300000 0x0>;
+			};
+		};
+	};
+};
+
+&fiu3 {
+	pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>;
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-rx-bus-width = <2>;
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			system1@0 {
+				label = "spi3-system1";
+				reg = <0x0 0x0>;
+			};
+		};
+	};
+};
+
+&fiux {
+	spix-mode;
+};
+
+&watchdog1 {
+	status = "okay";
+};
+
+&rng {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&lpc_kcs {
+	kcs1: kcs1@0 {
+		status = "okay";
+	};
+
+	kcs2: kcs2@0 {
+		status = "okay";
+	};
+
+	kcs3: kcs3@0 {
+		status = "okay";
+	};
+};
+
+/* lm75 on SVB */
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+	lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+		status = "okay";
+	};
+};
+
+/* lm75 on EB */
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+	lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+		status = "okay";
+	};
+};
+
+/* tmp100 on EB */
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+	tmp100@48 {
+		compatible = "tmp100";
+		reg = <0x48>;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c5 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+/* tmp100 on SVB */
+&i2c6 {
+	clock-frequency = <100000>;
+	status = "okay";
+	tmp100@48 {
+		compatible = "tmp100";
+		reg = <0x48>;
+		status = "okay";
+	};
+};
+
+&i2c7 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c8 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c9 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c10 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c11 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c14 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&pwm_fan {
+	status = "okay";
+	fan@0 {
+		reg = <0x00>;
+		fan-tach-ch = /bits/ 8 <0x00 0x01>;
+		cooling-levels = <127 255>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		fan-tach-ch = /bits/ 8 <0x02 0x03>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		fan-tach-ch = /bits/ 8 <0x04 0x05>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		fan-tach-ch = /bits/ 8 <0x06 0x07>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		fan-tach-ch = /bits/ 8 <0x08 0x09>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		fan-tach-ch = /bits/ 8 <0x0A 0x0B>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		fan-tach-ch = /bits/ 8 <0x0C 0x0D>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+	fan@7 {
+		reg = <0x07>;
+		fan-tach-ch = /bits/ 8 <0x0E 0x0F>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+};
+
+&spi0 {
+	cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	flash@0 {
+		compatible = "winbond,w25q128",
+		"jedec,spi-nor";
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <5000000>;
+		partition@0 {
+			label = "spi0_spare1";
+			reg = <0x0000000 0x800000>;
+		};
+		partition@1 {
+			label = "spi0_spare2";
+			reg = <0x800000 0x0>;
+		};
+	};
+};
+
+&spi1 {
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	flash@0 {
+		compatible = "winbond,w25q128fw",
+		"jedec,spi-nor";
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <5000000>;
+		partition@0 {
+			label = "spi1_spare1";
+			reg = <0x0000000 0x800000>;
+		};
+		partition@1 {
+			label = "spi1_spare2";
+			reg = <0x800000 0x0>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <	&iox1_pins
+			&pin8_input
+			&pin9_output_high
+			&pin10_input
+			&pin11_output_high
+			&pin16_input
+			&pin24_output_high
+			&pin25_output_low
+			&pin32_output_high
+			&jtag2_pins
+			&pin61_output_high
+			&pin62_output_high
+			&pin63_output_high
+			&lpc_pins
+			&pin160_input
+			&pin162_input
+			&pin168_input
+			&pin169_input
+			&pin170_input
+			&pin187_output_high
+			&pin190_input
+			&pin191_output_high
+			&pin192_output_high
+			&pin197_output_low
+			&ddc_pins
+			&pin218_input
+			&pin219_output_low
+			&pin220_output_low
+			&pin221_output_high
+			&pin222_input
+			&pin223_output_low
+			&spix_pins
+			&pin228_output_low
+			&pin231_output_high
+			&pin255_input>;
+};
+
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-pincfg-evb.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-pincfg-evb.dtsi
new file mode 100644
index 0000000000000..3b3806274adf7
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-pincfg-evb.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology
+
+/ {
+	pinctrl: pinctrl@f0800000 {
+		pin8_input: pin8-input {
+			pins = "GPIO8/LKGPO1";
+			bias-disable;
+			input-enable;
+		};
+		pin9_output_high: pin9-output-high {
+			pins = "GPIO9/LKGPO2";
+			bias-disable;
+			output-high;
+		};
+		pin10_input: pin10-input {
+			pins = "GPIO10/IOXHLD";
+			bias-disable;
+			input-enable;
+		};
+		pin11_output_high: pin11-output-high {
+			pins = "GPIO11/IOXHCK";
+			bias-disable;
+			output-high;
+		};
+		pin16_input: pin16-input {
+			pins = "GPIO16/LKGPO0";
+			bias-disable;
+			input-enable;
+		};
+		pin24_output_high: pin24-output-high {
+			pins = "GPIO24/IOXHDO";
+			bias-disable;
+			output-high;
+		};
+		pin25_output_low: pin25-output-low {
+			pins = "GPIO25/IOXHDI";
+			bias-disable;
+			output-low;
+		};
+		pin32_output_high: pin32-output-high {
+			pins = "GPIO32/nSPI0CS1";
+			bias-disable;
+			output-high;
+		};
+		pin61_output_high: pin61-output-high {
+			pins = "GPO61/nDTR1_BOUT1/STRAP6";
+			bias-disable;
+			output-high;
+		};
+		pin62_output_high: pin62-output-high {
+			pins = "GPO62/nRTST1/STRAP5";
+			bias-disable;
+			output-high;
+		};
+		pin63_output_high: pin63-output-high {
+			pins = "GPO63/TXD1/STRAP4";
+			bias-disable;
+			output-high;
+		};
+		pin160_input: pin160-input {
+			pins = "GPIO160/CLKOUT/RNGOSCOUT";
+			bias-disable;
+			input-enable;
+		};
+		pin162_input: pin162-input {
+			pins = "GPIO162/SERIRQ";
+			bias-disable;
+			input-enable;
+		};
+		pin168_input: pin168-input {
+			pins = "GPIO168/nCLKRUN/nESPIALERT";
+			bias-disable;
+			input-enable;
+		};
+		pin169_input: pin169-input {
+			pins = "GPIO169/nSCIPME";
+			bias-disable;
+			input-enable;
+		};
+		pin170_input: pin170-input {
+			pins = "GPIO170/nSMI";
+			bias-disable;
+			input-enable;
+		};
+		pin187_output_high: pin187-output-high {
+			pins = "GPIO187/nSPI3CS1";
+			bias-disable;
+			output-high;
+		};
+		pin190_input: pin190-input {
+			pins = "GPIO190/nPRD_SMI";
+			bias-disable;
+			input-enable;
+		};
+		pin191_output_high: pin191-output-high {
+			pins = "GPIO191";
+			bias-disable;
+			output-high;
+		};
+		pin192_output_high: pin192-output-high {
+			pins = "GPIO192";
+			bias-disable;
+			output-high;
+		};
+		pin197_output_low: pin197-output-low {
+			pins = "GPIO197/SMB0DEN";
+			bias-disable;
+			output-low;
+		};
+		pin218_input: pin218-input {
+			pins = "GPIO218/nWDO1";
+			bias-disable;
+			input-enable;
+		};
+		pin219_output_low: pin219-output-low {
+			pins = "GPIO219/nWDO2";
+			bias-disable;
+			output-low;
+		};
+		pin220_output_low: pin220-output-low {
+			pins = "GPIO220/SMB12SCL";
+			bias-disable;
+			output-low;
+		};
+		pin221_output_high: pin221-output-high {
+			pins = "GPIO221/SMB12SDA";
+			bias-disable;
+			output-high;
+		};
+		pin222_input: pin222-input {
+			pins = "GPIO222/SMB13SCL";
+			bias-disable;
+			input-enable;
+		};
+		pin223_output_low: pin223-output-low {
+			pins = "GPIO223/SMB13SDA";
+			bias-disable;
+			output-low;
+		};
+		pin228_output_low: pin228-output-low {
+			pins = "GPIO228/nSPIXCS1";
+			bias-disable;
+			output-low;
+		};
+		pin231_output_high: pin231-output-high {
+			pins = "GPIO230/SPIXD3";
+			bias-disable;
+			output-high;
+		};
+		pin255_input: pin255-input {
+			pins = "GPI255/DACOSEL";
+			bias-disable;
+			input-enable;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi
new file mode 100644
index 0000000000000..230cb344b2e1d
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi
@@ -0,0 +1,517 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 Quanta Computer Inc. Samuel.Jiang@quantatw.com
+
+/ {
+	pinctrl: pinctrl@f0800000 {
+		gpio0ol_pins: gpio0ol-pins {
+			pins = "GPIO0/IOX1DI";
+			bias-disable;
+			output-low;
+		};
+		gpio1ol_pins: gpio1ol-pins {
+			pins = "GPIO1/IOX1LD";
+			bias-disable;
+			output-low;
+		};
+		gpio2ol_pins: gpio2ol-pins {
+			pins = "GPIO2/IOX1CK";
+			bias-disable;
+			output-low;
+		};
+		gpio3ol_pins: gpio3ol-pins {
+			pins = "GPIO3/IOX1D0";
+			bias-disable;
+			output-low;
+		};
+		gpio5_pins: gpio5-pins {
+			pins = "GPIO5/IOX2LD/SMB1DSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio6_pins: gpio6-pins {
+			pins = "GPIO6/IOX2CK/SMB2DSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio7_pins: gpio7-pins {
+			pins = "GPIO7/IOX2D0/SMB2DSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio8o_pins: gpio8o-pins {
+			pins = "GPIO8/LKGPO1";
+			bias-disable;
+			output-high;
+		};
+		gpio9ol_pins: gpio9ol-pins {
+			pins = "GPIO9/LKGPO2";
+			bias-disable;
+			output-low;
+		};
+		gpio10_pins: gpio10-pins {
+			pins = "GPIO10/IOXHLD";
+			bias-disable;
+			input-enable;
+		};
+		gpio11_pins: gpio11-pins {
+			pins = "GPIO11/IOXHCK";
+			bias-disable;
+			input-enable;
+		};
+		gpio12ol_pins: gpio12ol-pins {
+			pins = "GPIO12/GSPICK/SMB5BSCL";
+			bias-disable;
+			output-low;
+		};
+		gpio13ol_pins: gpio13ol-pins {
+			pins = "GPIO13/GSPIDO/SMB5BSDA";
+			bias-disable;
+			output-low;
+		};
+		gpio14ol_pins: gpio14ol-pins {
+			pins = "GPIO14/GSPIDI/SMB5CSCL";
+			bias-disable;
+			output-low;
+		};
+		gpio15ol_pins: gpio15ol-pins {
+			pins = "GPIO15/GSPICS/SMB5CSDA";
+			bias-disable;
+			output-low;
+		};
+		gpio20_pins: gpio20-pins {
+			pins = "GPIO20/SMB4CSDA/SMB15SDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio21_pins: gpio21-pins {
+			pins = "GPIO21/SMB4CSCL/SMB15SCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio22o_pins: gpio22o-pins {
+			pins = "GPIO22/SMB4DSDA/SMB14SDA";
+			bias-disable;
+			output-high;
+		};
+		gpio23_pins: gpio23-pins {
+			pins = "GPIO23/SMB4DSCL/SMB14SCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio24_pins: gpio24-pins {
+			pins = "GPIO24/IOXHDO";
+			bias-disable;
+			input-enable;
+		};
+		gpio25_pins: gpio25-pins {
+			pins = "GPIO25/IOXHDI";
+			bias-disable;
+			input-enable;
+		};
+		gpio30_pins: gpio30-pins {
+			pins = "GPIO30/SMB3SDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio31_pins: gpio31-pins {
+			pins = "GPIO31/SMB3SCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio37o_pins: gpio37o-pins {
+			pins = "GPIO37/SMB3CSDA";
+			bias-disable;
+			output-high;
+		};
+		gpio38_pins: gpio38-pins {
+			pins = "GPIO38/SMB3CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio39_pins: gpio39-pins {
+			pins = "GPIO39/SMB3BSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio40o_pins: gpio40o-pins {
+			pins = "GPIO40/SMB3BSCL";
+			bias-disable;
+			output-high;
+		};
+		gpio59_pins: gpio59-pins {
+			pins = "GPIO59/SMB3DSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio76_pins: gpio76-pins {
+			pins = "GPIO76/FANIN12";
+			bias-disable;
+			input-enable;
+		};
+		gpio77_pins: gpio77-pins {
+			pins = "GPIO77/FANIN13";
+			bias-disable;
+			input-enable;
+		};
+		gpio78o_pins: gpio78o-pins {
+			pins = "GPIO78/FANIN14";
+			bias-disable;
+			output-high;
+		};
+		gpio79_pins: gpio79-pins {
+			pins = "GPIO79/FANIN15";
+			bias-disable;
+			input-enable;
+		};
+		gpio82_pins: gpio82-pins {
+			pins = "GPIO82/PWM2";
+			bias-disable;
+			input-enable;
+		};
+		gpio83_pins: gpio83-pins {
+			pins = "GPIO83/PWM3";
+			bias-disable;
+			input-enable;
+		};
+		gpio84_pins: gpio84-pins {
+			pins = "GPIO84/R2TXD0";
+			bias-disable;
+			input-enable;
+		};
+		gpio85o_pins: gpio85o-pins {
+			pins = "GPIO85/R2TXD1";
+			bias-disable;
+			output-high;
+		};
+		gpio86ol_pins: gpio86ol-pins {
+			pins = "GPIO86/R2TXEN";
+			bias-disable;
+			output-low;
+		};
+		gpio87_pins: gpio87-pins {
+			pins = "GPIO87/R2RXD0";
+			bias-disable;
+			input-enable;
+		};
+		gpio88_pins: gpio88-pins {
+			pins = "GPIO88/R2RXD1";
+			bias-disable;
+			input-enable;
+		};
+		gpio89_pins: gpio89-pins {
+			pins = "GPIO89/R2CRSDV";
+			bias-disable;
+			input-enable;
+		};
+		gpio90_pins: gpio90-pins {
+			pins = "GPIO90/R2RXERR";
+			bias-disable;
+			input-enable;
+		};
+		gpio93_pins: gpio93-pins {
+			pins = "GPIO93/GA20/SMB5DSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio94ol_pins: gpio94ol-pins {
+			pins = "GPIO94/nKBRST/SMB5DSDA";
+			bias-disable;
+			output-low;
+		};
+		gpio108ol_pins: gpio108ol-pins {
+			pins = "GPIO108/RG1MDC";
+			bias-disable;
+			output-low;
+		};
+		gpio109ol_pins: gpio109ol-pins {
+			pins = "GPIO109/RG1MDIO";
+			bias-disable;
+			output-low;
+		};
+		gpio110ol_pins: gpio110ol-pins {
+			pins = "GPIO110/RG2TXD0/DDRV0";
+			bias-disable;
+			output-low;
+		};
+		gpio111ol_pins: gpio111ol-pins {
+			pins = "GPIO111/RG2TXD1/DDRV1";
+			bias-disable;
+			output-low;
+		};
+		gpio112ol_pins: gpio112ol-pins {
+			pins = "GPIO112/RG2TXD2/DDRV2";
+			bias-disable;
+			output-low;
+		};
+		gpio113ol_pins: gpio113ol-pins {
+			pins = "GPIO113/RG2TXD3/DDRV3";
+			bias-disable;
+			output-low;
+		};
+		gpio114o_pins: gpio114o-pins {
+			pins = "GPIO114/SMB0SCL";
+			bias-disable;
+			output-high;
+		};
+		gpio115_pins: gpio115-pins {
+			pins = "GPIO115/SMB0SDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio120_pins: gpio120-pins {
+			pins = "GPIO120/SMB2CSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio121_pins: gpio121-pins {
+			pins = "GPIO121/SMB2CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio122_pins: gpio122-pins {
+			pins = "GPIO122/SMB2BSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio123_pins: gpio123-pins {
+			pins = "GPIO123/SMB2BSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio124_pins: gpio124-pins {
+			pins = "GPIO124/SMB1CSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio125_pins: gpio125-pins {
+			pins = "GPIO125/SMB1CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio126_pins: gpio126-pins {
+			pins = "GPIO126/SMB1BSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio127o_pins: gpio127o-pins {
+			pins = "GPIO127/SMB1BSCL";
+			bias-disable;
+			output-high;
+		};
+		gpio136_pins: gpio136-pins {
+			pins = "GPIO136/SD1DT0";
+			bias-disable;
+			input-enable;
+		};
+		gpio137_pins: gpio137-pins {
+			pins = "GPIO137/SD1DT1";
+			bias-disable;
+			input-enable;
+		};
+		gpio138_pins: gpio138-pins {
+			pins = "GPIO138/SD1DT2";
+			bias-disable;
+			input-enable;
+		};
+		gpio139_pins: gpio139-pins {
+			pins = "GPIO139/SD1DT3";
+			bias-disable;
+			input-enable;
+		};
+		gpio140_pins: gpio140-pins {
+			pins = "GPIO140/SD1CLK";
+			bias-disable;
+			input-enable;
+		};
+		gpio141_pins: gpio141-pins {
+			pins = "GPIO141/SD1WP";
+			bias-disable;
+			input-enable;
+		};
+		gpio142_pins: gpio142-pins {
+			pins = "GPIO142/SD1CMD";
+			bias-disable;
+			input-enable;
+		};
+		gpio143_pins: gpio143-pins {
+			pins = "GPIO143/SD1CD/SD1PWR";
+			bias-disable;
+			input-enable;
+		};
+		gpio144_pins: gpio144-pins {
+			pins = "GPIO144/PWM4";
+			bias-disable;
+			input-enable;
+		};
+		gpio145_pins: gpio145-pins {
+			pins = "GPIO145/PWM5";
+			bias-disable;
+			input-enable;
+		};
+		gpio146_pins: gpio146-pins {
+			pins = "GPIO146/PWM6";
+			bias-disable;
+			input-enable;
+		};
+		gpio147_pins: gpio147-pins {
+			pins = "GPIO147/PWM7";
+			bias-disable;
+			input-enable;
+		};
+		gpio153o_pins: gpio153o-pins {
+			pins = "GPIO153/MMCWP";
+			bias-disable;
+			output-high;
+		};
+		gpio155_pins: gpio155-pins {
+			pins = "GPIO155/nMMCCD/nMMCRST";
+			bias-disable;
+			input-enable;
+		};
+		gpio160o_pins: gpio160o-pins {
+			pins = "GPIO160/CLKOUT/RNGOSCOUT";
+			bias-disable;
+			output-high;
+		};
+		gpio169o_pins: gpio169o-pins {
+			pins = "GPIO169/nSCIPME";
+			bias-disable;
+			output-high;
+		};
+		gpio188o_pins: gpio188o-pins {
+			pins = "GPIO188/SPI3D2/nSPI3CS2";
+			bias-disable;
+			output-high;
+		};
+		gpio189_pins: gpio189-pins {
+			pins = "GPIO189/SPI3D3/nSPI3CS3";
+			bias-disable;
+			input-enable;
+		};
+		gpio196_pins: gpio196-pins {
+			pins = "GPIO196/SMB0CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio197_pins: gpio197-pins {
+			pins = "GPIO197/SMB0DEN";
+			bias-disable;
+			input-enable;
+		};
+		gpio198o_pins: gpio198o-pins {
+			pins = "GPIO198/SMB0DSDA";
+			bias-disable;
+			output-high;
+		};
+		gpio199o_pins: gpio199o-pins {
+			pins = "GPIO199/SMB0DSCL";
+			bias-disable;
+			output-high;
+		};
+		gpio200_pins: gpio200-pins {
+			pins = "GPIO200/R2CK";
+			input-enable;
+			bias-disable;
+		};
+		gpio202_pins: gpio202-pins {
+			pins = "GPIO202/SMB0CSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio203o_pins: gpio203o-pins {
+			pins = "GPIO203/FANIN16";
+			bias-disable;
+			output-high;
+		};
+		gpio208_pins: gpio208-pins {
+			pins = "GPIO208/RG2TXC/DVCK";
+			bias-disable;
+			input-enable;
+		};
+		gpio209ol_pins: gpio209ol-pins {
+			pins = "GPIO209/RG2TXCTL/DDRV4";
+			bias-disable;
+			output-low;
+		};
+		gpio210ol_pins: gpio210ol-pins {
+			pins = "GPIO210/RG2RXD0/DDRV5";
+			bias-disable;
+			output-low;
+		};
+		gpio211ol_pins: gpio211ol-pins {
+			pins = "GPIO211/RG2RXD1/DDRV6";
+			bias-disable;
+			output-low;
+		};
+		gpio212ol_pins: gpio212ol-pins {
+			pins = "GPIO212/RG2RXD2/DDRV7";
+			bias-disable;
+			output-low;
+		};
+		gpio213ol_pins: gpio213ol-pins {
+			pins = "GPIO213/RG2RXD3/DDRV8";
+			bias-disable;
+			output-low;
+		};
+		gpio214ol_pins: gpio214ol-pins {
+			pins = "GPIO214/RG2RXC/DDRV9";
+			bias-disable;
+			output-low;
+		};
+		gpio215ol_pins: gpio215ol-pins {
+			pins = "GPIO215/RG2RXCTL/DDRV10";
+			bias-disable;
+			output-low;
+		};
+		gpio216ol_pins: gpio216ol-pins {
+			pins = "GPIO216/RG2MDC/DDRV11";
+			bias-disable;
+			output-low;
+		};
+		gpio217ol_pins: gpio217ol-pins {
+			pins = "GPIO217/RG2MDIO/DVHSYNC";
+			bias-disable;
+			output-low;
+		};
+		gpio224_pins: gpio224-pins {
+			pins = "GPIO224/SPIXCK";
+			bias-disable;
+			input-enable;
+		};
+		gpio225ol_pins: gpio225ol-pins {
+			pins = "GPO225/SPIXD0/STRAP12";
+			bias-disable;
+			output-low;
+		};
+		gpio226ol_pins: gpio226ol-pins {
+			pins = "GPO226/SPIXD1/STRAP13";
+			bias-disable;
+			output-low;
+		};
+		gpio227ol_pins: gpio227ol-pins {
+			pins = "GPIO227/nSPIXCS0";
+			bias-disable;
+			output-low;
+		};
+		gpio228o_pins: gpio228ol-pins {
+			pins = "GPIO228/nSPIXCS1";
+			bias-disable;
+			output-high;
+		};
+		gpio229o_pins: gpio229o-pins {
+			pins = "GPO229/SPIXD2/STRAP3";
+			bias-disable;
+			output-high;
+		};
+		gpio230_pins: gpio230-pins {
+			pins = "GPIO230/SPIXD3";
+			bias-disable;
+			input-enable;
+		};
+		gpio231o_pins: gpio231o-pins {
+			pins = "GPIO231/nCLKREQ";
+			bias-disable;
+			output-high;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
new file mode 100644
index 0000000000000..87359ab05db3e
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
@@ -0,0 +1,1052 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 Nuvoton Technology <kwliu@nuvoton.com>
+// Copyright (c) 2019 Quanta Computer Inc. <Samuel.Jiang@quantatw.com>
+
+/dts-v1/;
+#include "nuvoton-npcm750.dtsi"
+#include "nuvoton-npcm750-runbmc-olympus-pincfg.dtsi"
+
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Nuvoton npcm750 RunBMC Olympus";
+	compatible = "nuvoton,npcm750";
+
+	aliases {
+		ethernet1 = &gmac0;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		fiu0 = &fiu0;
+		fiu1 = &fiu3;
+	};
+
+	chosen {
+		stdout-path = &serial3;
+	};
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+		label = "heartbeat";
+			gpios = <&gpio3 14 1>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio3 15 1>;
+		};
+	};
+
+	jtag {
+		compatible = "nuvoton,npcm750-jtag";
+		enable_pspi_jtag = <1>;
+		pspi-index = <2>;
+		tck {
+			label = "tck";
+			gpios = <&gpio0 19 0>; /* gpio19 */
+			regbase = <0xf0010000 0x1000>;
+		};
+
+		tdi {
+			label = "tdi";
+			gpios = <&gpio0 18 0>; /* gpio18 */
+			regbase = <0xf0010000 0x1000>;
+		};
+
+		tdo {
+			label = "tdo";
+			gpios = <&gpio0 17 0>; /* gpio17 */
+			regbase = <0xf0010000 0x1000>;
+		};
+		tms {
+			label = "tms";
+			gpios = <&gpio0 16 0>; /* gpio16 */
+			regbase = <0xf0010000 0x1000>;
+		};
+	};
+};
+
+&fiu0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0cs1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bmc@0{
+				label = "bmc";
+				reg = <0x000000 0x2000000>;
+			};
+			u-boot@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x80000>;
+				read-only;
+			};
+			u-boot-env@100000{
+				label = "u-boot-env";
+				reg = <0x00100000 0x40000>;
+			};
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x0200000 0x600000>;
+			};
+			rofs@800000 {
+				label = "rofs";
+				reg = <0x800000 0x1500000>;
+			};
+			rwfs@1d00000 {
+				label = "rwfs";
+				reg = <0x1d00000 0x300000>;
+			};
+		};
+	};
+
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <1>;
+		npcm,fiu-rx-bus-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			spare1@0 {
+				label = "spi0-cs1-spare1";
+				reg = <0x0 0x800000>;
+			};
+			spare2@800000 {
+				label = "spi0-cs1-spare2";
+				reg = <0x800000 0x0>;
+			};
+		};
+	};
+};
+
+&fiu3 {
+	pinctrl-0 = <&spi3_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			system1@0 {
+				label = "spi3-system1";
+				reg = <0x0 0x800000>;
+			};
+			system2@800000 {
+				label = "spi3-system2";
+				reg = <0x800000 0x0>;
+			};
+		};
+	};
+};
+
+&gcr {
+	mux-controller {
+		compatible = "mmio-mux";
+		#mux-control-cells = <1>;
+
+		mux-reg-masks = <0x38 0x07>;
+		idle-states = <6>;
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	snps,eee-force-disable;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c_slot1a: i2c-bus@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_slot1b: i2c-bus@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_slot2a: i2c-bus@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_slot2b: i2c-bus@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c_slot3: i2c-bus@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c_slot4: i2c-bus@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c_slot5: i2c-bus@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+	};
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c_m2_s1: i2c-bus@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_m2_s2: i2c-bus@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c_m2_s3: i2c-bus@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_m2_s4: i2c-bus@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	power-supply@58 {
+		compatible = "delta,dps800";
+		reg = <0x58>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-slave-mqueue@10 {
+		compatible = "i2c-slave-mqueue";
+		reg = <(I2C_OWN_SLAVE_ADDRESS | 0x10)>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	ina219@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+	};
+	ina219@41 {
+		compatible = "ti,ina219";
+		reg = <0x41>;
+	};
+	ina219@44 {
+		compatible = "ti,ina219";
+		reg = <0x44>;
+	};
+	ina219@45 {
+		compatible = "ti,ina219";
+		reg = <0x45>;
+	};
+	tps53679@60 {
+		compatible = "ti,tps53679";
+		reg = <0x60>;
+	};
+	tps53659@62 {
+		compatible = "ti,tps53659";
+		reg = <0x62>;
+	};
+	tps53659@64 {
+		compatible = "ti,tps53659";
+		reg = <0x64>;
+	};
+	tps53622@67 {
+		compatible = "ti,tps53622";
+		reg = <0x67>;
+	};
+	tps53622@69 {
+		compatible = "ti,tps53622";
+		reg = <0x69>;
+	};
+	tps53679@70 {
+		compatible = "ti,tps53679";
+		reg = <0x70>;
+	};
+	tps53659@72 {
+		compatible = "ti,tps53659";
+		reg = <0x72>;
+	};
+	tps53659@74 {
+		compatible = "ti,tps53659";
+		reg = <0x74>;
+	};
+	tps53622@77 {
+		compatible = "ti,tps53622";
+		reg = <0x77>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	adm1278@11 {
+		compatible = "adm1278";
+		reg = <0x11>;
+		Rsense = <500>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	gpio: pca9555@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9539_g1a: pca9539-g1a@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		reset-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+		G1A_P0_0 {
+			gpio-hog;
+			gpios = <0 0>;
+			output-high;
+			line-name = "TPM_BMC_ALERT_N";
+		};
+		G1A_P0_1 {
+			gpio-hog;
+			gpios = <1 0>;
+			input;
+			line-name = "FM_BIOS_TOP_SWAP";
+		};
+		G1A_P0_2 {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "FM_BIOS_PREFRB2_GOOD";
+		};
+		G1A_P0_3 {
+			gpio-hog;
+			gpios = <3 0>;
+			input;
+			line-name = "BMC_SATAXPCIE_0TO3_SEL";
+		};
+		G1A_P0_4 {
+			gpio-hog;
+			gpios = <4 0>;
+			input;
+			line-name = "BMC_SATAXPCIE_4TO7_SEL";
+		};
+		G1A_P0_5 {
+			gpio-hog;
+			gpios = <5 0>;
+			output-low;
+			line-name = "FM_UV_ADR_TRIGGER_EN_N";
+		};
+		G1A_P0_6 {
+			gpio-hog;
+			gpios = <6 0>;
+			input;
+			line-name = "RM_THROTTLE_EN_N";
+		};
+		G1A_P1_0 {
+			gpio-hog;
+			gpios = <8 0>;
+			input;
+			line-name = "FM_BMC_TPM_PRES_N";
+		};
+		G1A_P1_1 {
+			gpio-hog;
+			gpios = <9 0>;
+			input;
+			line-name = "FM_CPU0_SKTOCC_LVT3_N";
+		};
+		G1A_P1_2 {
+			gpio-hog;
+			gpios = <10 0>;
+			input;
+			line-name = "FM_CPU1_SKTOCC_LVT3_N";
+		};
+		G1A_P1_3 {
+			gpio-hog;
+			gpios = <11 0>;
+			input;
+			line-name = "PSU1_ALERT_N";
+		};
+		G1A_P1_4 {
+			gpio-hog;
+			gpios = <12 0>;
+			input;
+			line-name = "PSU2_ALERT_N";
+		};
+		G1A_P1_5 {
+			gpio-hog;
+			gpios = <13 0>;
+			input;
+			line-name = "H_CPU0_FAST_WAKE_LVT3_N";
+		};
+		G1A_P1_6 {
+			gpio-hog;
+			gpios = <14 0>;
+			output-high;
+			line-name = "I2C_MUX1_RESET_N";
+		};
+		G1A_P1_7 {
+			gpio-hog;
+			gpios = <15 0>;
+			input;
+			line-name = "FM_CPU_CATERR_LVT3_N";
+		};
+	};
+
+	pca9539_g1b: pca9539-g1b@75 {
+		compatible = "nxp,pca9539";
+		reg = <0x75>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		G1B_P0_0 {
+			gpio-hog;
+			gpios = <0 0>;
+			input;
+			line-name = "PVDDQ_ABC_PINALERT_N";
+		};
+		G1B_P0_1 {
+			gpio-hog;
+			gpios = <1 0>;
+			input;
+			line-name = "PVDDQ_DEF_PINALERT_N";
+		};
+		G1B_P0_2 {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "PVDDQ_GHJ_PINALERT_N";
+		};
+		G1B_P0_3 {
+			gpio-hog;
+			gpios = <3 0>;
+			input;
+			line-name = "PVDDQ_KLM_PINALERT_N";
+		};
+		G1B_P0_5 {
+			gpio-hog;
+			gpios = <5 0>;
+			input;
+			line-name = "FM_BOARD_REV_ID0";
+		};
+		G1B_P0_6 {
+			gpio-hog;
+			gpios = <6 0>;
+			input;
+			line-name = "FM_BOARD_REV_ID1";
+		};
+		G1B_P0_7 {
+			gpio-hog;
+			gpios = <7 0>;
+			input;
+			line-name = "FM_BOARD_REV_ID2";
+		};
+		G1B_P1_0 {
+			gpio-hog;
+			gpios = <8 0>;
+			input;
+			line-name = "FM_OC_DETECT_EN_N";
+		};
+		G1B_P1_1 {
+			gpio-hog;
+			gpios = <9 0>;
+			input;
+			line-name = "FM_FLASH_DESC_OVERRIDE";
+		};
+		G1B_P1_2 {
+			gpio-hog;
+			gpios = <10 0>;
+			output-low;
+			line-name = "FP_PWR_ID_LED_N";
+		};
+		G1B_P1_3 {
+			gpio-hog;
+			gpios = <11 0>;
+			output-low;
+			line-name = "BMC_LED_PWR_GRN";
+		};
+		G1B_P1_4 {
+			gpio-hog;
+			gpios = <12 0>;
+			output-low;
+			line-name = "BMC_LED_PWR_AMBER";
+		};
+		G1B_P1_5 {
+			gpio-hog;
+			gpios = <13 0>;
+			output-high;
+			line-name = "FM_BMC_FAULT_LED_N";
+		};
+		G1B_P1_6 {
+			gpio-hog;
+			gpios = <14 0>;
+			output-high;
+			line-name = "FM_CPLD_BMC_PWRDN_N";
+		};
+		G1B_P1_7 {
+			gpio-hog;
+			gpios = <15 0>;
+			output-high;
+			line-name = "BMC_LED_CATERR_N";
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	pca9539_g2a: pca9539-g2a@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		reset-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+		G2A_P0_0 {
+			gpio-hog;
+			gpios = <0 0>;
+			output-high;
+			line-name = "BMC_PON_RST_REQ_N";
+		};
+		G2A_P0_1 {
+			gpio-hog;
+			gpios = <1 0>;
+			output-high;
+			line-name = "BMC_RST_IND_REQ_N";
+		};
+		G2A_P0_2 {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "RST_BMC_RTCRST";
+		};
+		G2A_P0_3 {
+			gpio-hog;
+			gpios = <3 0>;
+			output-high;
+			line-name = "FM_BMC_PWRBTN_OUT_N";
+		};
+		G2A_P0_4 {
+			gpio-hog;
+			gpios = <4 0>;
+			output-high;
+			line-name = "RST_BMC_SYSRST_BTN_OUT_N";
+		};
+		G2A_P0_5 {
+			gpio-hog;
+			gpios = <5 0>;
+			output-high;
+			line-name = "FM_BATTERY_SENSE_EN_N";
+		};
+		G2A_P0_6 {
+			gpio-hog;
+			gpios = <6 0>;
+			output-high;
+			line-name = "FM_BMC_READY_N";
+		};
+		G2A_P0_7 {
+			gpio-hog;
+			gpios = <7 0>;
+			input;
+			line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+		};
+		G2A_P1_0 {
+			gpio-hog;
+			gpios = <8 0>;
+			input;
+			line-name = "FM_SLOT4_CFG0";
+		};
+		G2A_P1_1 {
+			gpio-hog;
+			gpios = <9 0>;
+			input;
+			line-name = "FM_SLOT4_CFG1";
+		};
+		G2A_P1_2 {
+			gpio-hog;
+			gpios = <10 0>;
+			input;
+			line-name = "FM_NVDIMM_EVENT_N";
+		};
+		G2A_P1_3 {
+			gpio-hog;
+			gpios = <11 0>;
+			input;
+			line-name = "PSU1_BLADE_EN_N";
+		};
+		G2A_P1_4 {
+			gpio-hog;
+			gpios = <12 0>;
+			input;
+			line-name = "BMC_PCH_FNM";
+		};
+		G2A_P1_5 {
+			gpio-hog;
+			gpios = <13 0>;
+			input;
+			line-name = "FM_SOL_UART_CH_SEL";
+		};
+		G2A_P1_6 {
+			gpio-hog;
+			gpios = <14 0>;
+			input;
+			line-name = "FM_BIOS_POST_CMPLT_N";
+		};
+	};
+
+	pca9539_g2b: pca9539-g2b@75 {
+		compatible = "nxp,pca9539";
+		reg = <0x75>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		G2B_P0_0 {
+			gpio-hog;
+			gpios = <0 0>;
+			input;
+			line-name = "FM_CPU_MSMI_LVT3_N";
+		};
+		G2B_P0_1 {
+			gpio-hog;
+			gpios = <1 0>;
+			input;
+			line-name = "FM_BIOS_MRC_DEBUG_MSG_DIS";
+		};
+		G2B_P0_2 {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "FM_CPU1_DISABLE_BMC_N";
+		};
+		G2B_P0_3 {
+			gpio-hog;
+			gpios = <3 0>;
+			output-low;
+			line-name = "BMC_JTAG_SELECT";
+		};
+		G2B_P0_4 {
+			gpio-hog;
+			gpios = <4 0>;
+			output-high;
+			line-name = "PECI_MUX_SELECT";
+		};
+		G2B_P0_5 {
+			gpio-hog;
+			gpios = <5 0>;
+			output-high;
+			line-name = "I2C_MUX2_RESET_N";
+		};
+		G2B_P0_6 {
+			gpio-hog;
+			gpios = <6 0>;
+			input;
+			line-name = "FM_BMC_CPLD_PSU2_ON";
+		};
+		G2B_P0_7 {
+			gpio-hog;
+			gpios = <7 0>;
+			output-high;
+			line-name = "PSU2_ALERT_EN_N";
+		};
+		G2B_P1_0 {
+			gpio-hog;
+			gpios = <8 0>;
+			output-high;
+			line-name = "FM_CPU_BMC_INIT";
+		};
+		G2B_P1_1 {
+			gpio-hog;
+			gpios = <9 0>;
+			output-high;
+			line-name = "IRQ_BMC_PCH_SCI_LPC_N";
+		};
+		G2B_P1_2 {
+			gpio-hog;
+			gpios = <10 0>;
+			output-low;
+			line-name = "PMB_ALERT_EN_N";
+		};
+		G2B_P1_3 {
+			gpio-hog;
+			gpios = <11 0>;
+			output-high;
+			line-name = "FM_FAST_PROCHOT_EN_N";
+		};
+		G2B_P1_4 {
+			gpio-hog;
+			gpios = <12 0>;
+			output-high;
+			line-name = "BMC_NVDIMM_PRSNT_N";
+		};
+		G2B_P1_5 {
+			gpio-hog;
+			gpios = <13 0>;
+			output-low;
+			line-name = "FM_BACKUP_BIOS_SEL_H_BMC";
+		};
+		G2B_P1_6 {
+			gpio-hog;
+			gpios = <14 0>;
+			output-high;
+			line-name = "FM_PWRBRK_N";
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	tmp75@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+		status = "okay";
+	};
+	m24128_fru@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <64>;
+		status = "okay";
+	};
+};
+
+&pwm_fan {
+	pinctrl-names = "default";
+	pinctrl-0 = <   &pwm0_pins &pwm1_pins
+			&fanin0_pins &fanin1_pins
+			&fanin2_pins &fanin3_pins
+			&fanin4_pins &fanin5_pins
+			&fanin6_pins &fanin7_pins
+			&fanin8_pins &fanin9_pins
+			&fanin10_pins &fanin11_pins>;
+	status = "okay";
+
+	fan@0 {
+		reg = <0x00>;
+		fan-tach-ch = /bits/ 8 <0x00 0x01>;
+		cooling-levels = <127 255>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		fan-tach-ch = /bits/ 8 <0x02 0x03>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		fan-tach-ch = /bits/ 8 <0x04 0x05>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		fan-tach-ch = /bits/ 8 <0x06 0x07>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		fan-tach-ch = /bits/ 8 <0x08 0x09>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		fan-tach-ch = /bits/ 8 <0x0A 0x0B>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		fan-tach-ch = /bits/ 8 <0x0C 0x0D>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+	fan@7 {
+		reg = <0x07>;
+		fan-tach-ch = /bits/ 8 <0x0E 0x0F>;
+		cooling-levels = /bits/ 8 <127 255>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&watchdog1 {
+	status = "okay";
+};
+
+&rng {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&adc {
+	#io-channel-cells = <1>;
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+};
+
+&spi0 {
+	cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			/******* RunBMC inside Module pins *******/
+			&gpio0ol_pins
+			&gpio1ol_pins
+			&gpio2ol_pins
+			&gpio3ol_pins
+			&gpio8o_pins
+			&gpio9ol_pins
+			&gpio12ol_pins
+			&gpio13ol_pins
+			&gpio14ol_pins
+			&gpio15ol_pins
+			&gpio37o_pins
+			&gpio38_pins
+			&gpio39_pins
+			&gpio94ol_pins
+			&gpio108ol_pins
+			&gpio109ol_pins
+			&gpio111ol_pins
+			&gpio112ol_pins
+			&gpio113ol_pins
+			&gpio208_pins
+			&gpio209ol_pins
+			&gpio210ol_pins
+			&gpio211ol_pins
+			&gpio212ol_pins
+			&gpio213ol_pins
+			&gpio214ol_pins
+			&gpio215ol_pins
+			&gpio216ol_pins
+			&gpio217ol_pins
+			/******* RunBMC outside Connector pins *******/
+			&gpio5_pins
+			&gpio6_pins
+			&gpio7_pins
+			&gpio10_pins
+			&gpio11_pins
+			&gpio20_pins
+			&gpio21_pins
+			&gpio22o_pins
+			&gpio23_pins
+			&gpio24_pins
+			&gpio25_pins
+			&gpio30_pins
+			&gpio31_pins
+			&gpio40o_pins
+			&gpio59_pins
+			&gpio76_pins
+			&gpio77_pins
+			&gpio78o_pins
+			&gpio79_pins
+			&gpio82_pins
+			&gpio83_pins
+			&gpio84_pins
+			&gpio85o_pins
+			&gpio86ol_pins
+			&gpio87_pins
+			&gpio88_pins
+			&gpio89_pins
+			&gpio90_pins
+			&gpio93_pins
+			&gpio114o_pins
+			&gpio115_pins
+			&gpio120_pins
+			&gpio121_pins
+			&gpio122_pins
+			&gpio123_pins
+			&gpio124_pins
+			&gpio125_pins
+			&gpio126_pins
+			&gpio127o_pins
+			&gpio136_pins
+			&gpio137_pins
+			&gpio138_pins
+			&gpio139_pins
+			&gpio140_pins
+			&gpio141_pins
+			&gpio142_pins
+			&gpio143_pins
+			&gpio144_pins
+			&gpio146_pins
+			&gpio145_pins
+			&gpio147_pins
+			&gpio153o_pins
+			&gpio155_pins
+			&gpio160o_pins
+			&gpio169o_pins
+			&gpio188o_pins
+			&gpio189_pins
+			&gpio196_pins
+			&gpio197_pins
+			&gpio198o_pins
+			&gpio199o_pins
+			&gpio200_pins
+			&gpio202_pins
+			&gpio203o_pins
+			&gpio224_pins
+			&gpio225ol_pins
+			&gpio226ol_pins
+			&gpio227ol_pins
+			&gpio228o_pins
+			&gpio229o_pins
+			&gpio230_pins
+			&gpio231o_pins
+			&ddc_pins
+			&wdog1_pins
+			&wdog2_pins
+			>;
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
new file mode 100644
index 0000000000000..30eed40b89b5c
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
+// Copyright 2018 Google, Inc.
+
+#include "nuvoton-common-npcm7xx.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "nuvoton,npcm750-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+		};
+	};
+
+	soc {
+		timer@3fe600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x3fe600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&clk NPCM7XX_CLK_AHB>;
+		};
+	};
+
+	ahb {
+		gmac1: eth@f0804000 {
+			device_type = "network";
+			compatible = "snps,dwmac";
+			reg = <0xf0804000 0x2000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			ethernet = <1>;
+			clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
+			clock-names = "stmmaceth", "clk_gmac";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rg2_pins
+					&rg2mdio_pins>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
new file mode 100644
index 0000000000000..b78c116cbc18e
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+// Copyright 2021 Jonathan Neuschäfer
+
+/dts-v1/;
+
+/* The last 16 MiB are dedicated to the GPU */
+/memreserve/ 0x07000000 0x01000000;
+
+#include "nuvoton-wpcm450.dtsi"
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Supermicro X9SCi-LN4F BMC";
+	compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x08000000>; /* 128 MiB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins>;
+
+		uid {
+			label = "UID button";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		uid {
+			label = "UID";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		heartbeat {
+			label = "heartbeat";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fiu {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+		/* 0 */ "", "host-reset-control-n", "", "", "", "", "", "",
+		/* 8 */ "", "", "", "", "power-chassis-control-n", "", "uid-button", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 0 */ "", "", "", "", "led-heartbeat", "", "", "led-uid",
+		/* 8 */ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 0 */ "", "", "", "", "", "", "", "",
+		/* 8 */ "", "", "", "", "", "", "", "power-chassis-good";
+};
+
+&pinctrl {
+	key_pins: mux-keys {
+		groups = "gspi", "sspi";
+		function = "gpio";
+	};
+
+	led_pins: mux-leds {
+		groups = "hg3", "hg0", "pwm4";
+		function = "gpio";
+	};
+};
+
+&serial0 {
+	/*
+	 * Debug serial port. TX is exposed on the right pad of unpopulated
+	 * resistor R1247, RX on the right pad of R1162.
+	 */
+	status = "okay";
+};
+
+&serial1 {
+	/* "Serial over LAN" port. Connected to ttyS2 of the host system. */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
new file mode 100644
index 0000000000000..fd671c7a1e5d6
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+// Copyright 2021 Jonathan Neuschäfer
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "nuvoton,wpcm450";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	clk24m: clock-24mhz {
+		/* 24 MHz dummy clock */
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	refclk: clock-48mhz {
+		/* 48 MHz reference oscillator */
+		compatible = "fixed-clock";
+		clock-output-names = "ref";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&aic>;
+		ranges;
+
+		gcr: syscon@b0000000 {
+			compatible = "nuvoton,wpcm450-gcr", "syscon", "simple-mfd";
+			reg = <0xb0000000 0x200>;
+		};
+
+		clk: clock-controller@b0000200 {
+			compatible = "nuvoton,wpcm450-clk";
+			reg = <0xb0000200 0x100>;
+			clocks = <&refclk>;
+			clock-names = "ref";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		serial0: serial@b8000000 {
+			compatible = "nuvoton,wpcm450-uart";
+			reg = <0xb8000000 0x20>;
+			reg-shift = <2>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk24m>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&bsp_pins>;
+			status = "disabled";
+		};
+
+		serial1: serial@b8000100 {
+			compatible = "nuvoton,wpcm450-uart";
+			reg = <0xb8000100 0x20>;
+			reg-shift = <2>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk24m>;
+			status = "disabled";
+		};
+
+		timer0: timer@b8001000 {
+			compatible = "nuvoton,wpcm450-timer";
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xb8001000 0x1c>;
+			clocks = <&clk24m>;
+		};
+
+		watchdog0: watchdog@b800101c {
+			compatible = "nuvoton,wpcm450-wdt";
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xb800101c 0x4>;
+			clocks = <&clk24m>;
+		};
+
+		aic: interrupt-controller@b8002000 {
+			compatible = "nuvoton,wpcm450-aic";
+			reg = <0xb8002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pinctrl: pinctrl@b8003000 {
+			compatible = "nuvoton,wpcm450-pinctrl";
+			reg = <0xb8003000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio0: gpio@0 {
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+					     <3 IRQ_TYPE_LEVEL_HIGH>,
+					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+			};
+
+			gpio1: gpio@1 {
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+			};
+
+			gpio2: gpio@2 {
+				reg = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio3: gpio@3 {
+				reg = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio4: gpio@4 {
+				reg = <4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio5: gpio@5 {
+				reg = <5>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio6: gpio@6 {
+				reg = <6>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio7: gpio@7 {
+				reg = <7>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			smb3_pins: mux-smb3 {
+				groups = "smb3";
+				function = "smb3";
+			};
+
+			smb4_pins: mux-smb4 {
+				groups = "smb4";
+				function = "smb4";
+			};
+
+			smb5_pins: mux-smb5 {
+				groups = "smb5";
+				function = "smb5";
+			};
+
+			scs1_pins: mux-scs1 {
+				groups = "scs1";
+				function = "scs1";
+			};
+
+			scs2_pins: mux-scs2 {
+				groups = "scs2";
+				function = "scs2";
+			};
+
+			scs3_pins: mux-scs3 {
+				groups = "scs3";
+				function = "scs3";
+			};
+
+			smb0_pins: mux-smb0 {
+				groups = "smb0";
+				function = "smb0";
+			};
+
+			smb1_pins: mux-smb1 {
+				groups = "smb1";
+				function = "smb1";
+			};
+
+			smb2_pins: mux-smb2 {
+				groups = "smb2";
+				function = "smb2";
+			};
+
+			bsp_pins: mux-bsp {
+				groups = "bsp";
+				function = "bsp";
+			};
+
+			hsp1_pins: mux-hsp1 {
+				groups = "hsp1";
+				function = "hsp1";
+			};
+
+			hsp2_pins: mux-hsp2 {
+				groups = "hsp2";
+				function = "hsp2";
+			};
+
+			r1err_pins: mux-r1err {
+				groups = "r1err";
+				function = "r1err";
+			};
+
+			r1md_pins: mux-r1md {
+				groups = "r1md";
+				function = "r1md";
+			};
+
+			rmii2_pins: mux-rmii2 {
+				groups = "rmii2";
+				function = "rmii2";
+			};
+
+			r2err_pins: mux-r2err {
+				groups = "r2err";
+				function = "r2err";
+			};
+
+			r2md_pins: mux-r2md {
+				groups = "r2md";
+				function = "r2md";
+			};
+
+			kbcc_pins: mux-kbcc {
+				groups = "kbcc";
+				function = "kbcc";
+			};
+
+			dvo0_pins: mux-dvo0 {
+				groups = "dvo";
+				function = "dvo0";
+			};
+
+			dvo3_pins: mux-dvo3 {
+				groups = "dvo";
+				function = "dvo3";
+			};
+
+			clko_pins: mux-clko {
+				groups = "clko";
+				function = "clko";
+			};
+
+			smi_pins: mux-smi {
+				groups = "smi";
+				function = "smi";
+			};
+
+			uinc_pins: mux-uinc {
+				groups = "uinc";
+				function = "uinc";
+			};
+
+			gspi_pins: mux-gspi {
+				groups = "gspi";
+				function = "gspi";
+			};
+
+			mben_pins: mux-mben {
+				groups = "mben";
+				function = "mben";
+			};
+
+			xcs2_pins: mux-xcs2 {
+				groups = "xcs2";
+				function = "xcs2";
+			};
+
+			xcs1_pins: mux-xcs1 {
+				groups = "xcs1";
+				function = "xcs1";
+			};
+
+			sdio_pins: mux-sdio {
+				groups = "sdio";
+				function = "sdio";
+			};
+
+			sspi_pins: mux-sspi {
+				groups = "sspi";
+				function = "sspi";
+			};
+
+			fi0_pins: mux-fi0 {
+				groups = "fi0";
+				function = "fi0";
+			};
+
+			fi1_pins: mux-fi1 {
+				groups = "fi1";
+				function = "fi1";
+			};
+
+			fi2_pins: mux-fi2 {
+				groups = "fi2";
+				function = "fi2";
+			};
+
+			fi3_pins: mux-fi3 {
+				groups = "fi3";
+				function = "fi3";
+			};
+
+			fi4_pins: mux-fi4 {
+				groups = "fi4";
+				function = "fi4";
+			};
+
+			fi5_pins: mux-fi5 {
+				groups = "fi5";
+				function = "fi5";
+			};
+
+			fi6_pins: mux-fi6 {
+				groups = "fi6";
+				function = "fi6";
+			};
+
+			fi7_pins: mux-fi7 {
+				groups = "fi7";
+				function = "fi7";
+			};
+
+			fi8_pins: mux-fi8 {
+				groups = "fi8";
+				function = "fi8";
+			};
+
+			fi9_pins: mux-fi9 {
+				groups = "fi9";
+				function = "fi9";
+			};
+
+			fi10_pins: mux-fi10 {
+				groups = "fi10";
+				function = "fi10";
+			};
+
+			fi11_pins: mux-fi11 {
+				groups = "fi11";
+				function = "fi11";
+			};
+
+			fi12_pins: mux-fi12 {
+				groups = "fi12";
+				function = "fi12";
+			};
+
+			fi13_pins: mux-fi13 {
+				groups = "fi13";
+				function = "fi13";
+			};
+
+			fi14_pins: mux-fi14 {
+				groups = "fi14";
+				function = "fi14";
+			};
+
+			fi15_pins: mux-fi15 {
+				groups = "fi15";
+				function = "fi15";
+			};
+
+			pwm0_pins: mux-pwm0 {
+				groups = "pwm0";
+				function = "pwm0";
+			};
+
+			pwm1_pins: mux-pwm1 {
+				groups = "pwm1";
+				function = "pwm1";
+			};
+
+			pwm2_pins: mux-pwm2 {
+				groups = "pwm2";
+				function = "pwm2";
+			};
+
+			pwm3_pins: mux-pwm3 {
+				groups = "pwm3";
+				function = "pwm3";
+			};
+
+			pwm4_pins: mux-pwm4 {
+				groups = "pwm4";
+				function = "pwm4";
+			};
+
+			pwm5_pins: mux-pwm5 {
+				groups = "pwm5";
+				function = "pwm5";
+			};
+
+			pwm6_pins: mux-pwm6 {
+				groups = "pwm6";
+				function = "pwm6";
+			};
+
+			pwm7_pins: mux-pwm7 {
+				groups = "pwm7";
+				function = "pwm7";
+			};
+
+			hg0_pins: mux-hg0 {
+				groups = "hg0";
+				function = "hg0";
+			};
+
+			hg1_pins: mux-hg1 {
+				groups = "hg1";
+				function = "hg1";
+			};
+
+			hg2_pins: mux-hg2 {
+				groups = "hg2";
+				function = "hg2";
+			};
+
+			hg3_pins: mux-hg3 {
+				groups = "hg3";
+				function = "hg3";
+			};
+
+			hg4_pins: mux-hg4 {
+				groups = "hg4";
+				function = "hg4";
+			};
+
+			hg5_pins: mux-hg5 {
+				groups = "hg5";
+				function = "hg5";
+			};
+
+			hg6_pins: mux-hg6 {
+				groups = "hg6";
+				function = "hg6";
+			};
+
+			hg7_pins: mux-hg7 {
+				groups = "hg7";
+				function = "hg7";
+			};
+		};
+
+		fiu: spi-controller@c8000000 {
+			compatible = "nuvoton,wpcm450-fiu";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
+			reg-names = "control", "memory";
+			clocks = <&clk 0>;
+			nuvoton,shm = <&shm>;
+			status = "disabled";
+		};
+
+		shm: syscon@c8001000 {
+			compatible = "nuvoton,wpcm450-shm", "syscon";
+			reg = <0xc8001000 0x1000>;
+			reg-io-width = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/Makefile b/arch/arm/boot/dts/nvidia/Makefile
new file mode 100644
index 0000000000000..60091bf7e48b0
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/Makefile
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
+	tegra114-asus-tf701t.dtb \
+	tegra114-dalmore.dtb \
+	tegra114-roth.dtb \
+	tegra114-tn7.dtb
+dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
+	tegra124-apalis-eval.dtb \
+	tegra124-apalis-v1.2-eval.dtb \
+	tegra124-jetson-tk1.dtb \
+	tegra124-nyan-big.dtb \
+	tegra124-nyan-big-fhd.dtb \
+	tegra124-nyan-blaze.dtb \
+	tegra124-venice2.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
+	tegra20-acer-a500-picasso.dtb \
+	tegra20-asus-tf101.dtb \
+	tegra20-harmony.dtb \
+	tegra20-colibri-eval-v3.dtb \
+	tegra20-colibri-iris.dtb \
+	tegra20-medcom-wide.dtb \
+	tegra20-paz00.dtb \
+	tegra20-plutux.dtb \
+	tegra20-seaboard.dtb \
+	tegra20-tec.dtb \
+	tegra20-trimslice.dtb \
+	tegra20-ventana.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
+	tegra30-apalis-eval.dtb \
+	tegra30-apalis-v1.1-eval.dtb \
+	tegra30-asus-nexus7-grouper-PM269.dtb \
+	tegra30-asus-nexus7-grouper-E1565.dtb \
+	tegra30-asus-nexus7-tilapia-E1565.dtb \
+	tegra30-asus-tf201.dtb \
+	tegra30-asus-tf300t.dtb \
+	tegra30-asus-tf300tg.dtb \
+	tegra30-asus-tf700t.dtb \
+	tegra30-beaver.dtb \
+	tegra30-cardhu-a02.dtb \
+	tegra30-cardhu-a04.dtb \
+	tegra30-colibri-eval-v3.dtb \
+	tegra30-ouya.dtb \
+	tegra30-pegatron-chagall.dtb
diff --git a/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts
new file mode 100644
index 0000000000000..84a3eb38e71d2
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts
@@ -0,0 +1,807 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+
+#include "tegra114.dtsi"
+
+/ {
+	model = "Asus Transformer Pad TF701T";
+	compatible = "asus,tf701t", "nvidia,tegra114";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = "/mmc@78000600"; /* eMMC */
+		mmc1 = "/mmc@78000400"; /* uSD slot */
+		mmc2 = "/mmc@78000000"; /* WiFi */
+
+		rtc0 = &palmas;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Console */
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;
+			linux,cma-default;
+			reusable;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&tps65913_ldo2>;
+
+			nvidia,ganged-mode = <&dsib>;
+
+			panel_primary: panel@0 {
+				compatible = "sharp,lq101r1sx01";
+				reg = <0>;
+
+				link2 = <&panel_secondary>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+
+		dsi@54400000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&tps65913_ldo2>;
+
+			panel_secondary: panel@0 {
+				compatible = "sharp,lq101r1sx01";
+				reg = <0>;
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		asus_pad_ec_default: pinmux-asus-pad-ec-default {
+			ec-interrupt {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ec-request {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		backlight_default: pinmux-backlight-default {
+			backlight-enable {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		codec_default: pinmux-codec-default {
+			interrupt {
+				nvidia,pins = "gpio_w2_aud_pw2",
+						"gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ldo1-en {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		gpio_hall_sensor_default: pinmux-gpio-hall-sensor-default {
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		gpio_keys_default: pinmux-gpio-keys-default {
+			power {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			volume {
+				nvidia,pins = "kb_row1_pr1",
+						"kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		hp_det_default: pinmux-hp-det-default {
+			gmi_iordy_pi5 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		imu_default: pinmux-imu-default {
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		pwm_default: pinmux-pwm-default {
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		/* XXX make this something more sensible */
+		pwm_sleep: pinmux-pwm-sleep {
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		sdmmc3_default: pinmux-sdmmc3-default {
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <22>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"kb_col4_pq4",
+						"sdmmc3_clk_lb_out_pee4",
+						"sdmmc3_clk_lb_in_pee5",
+						"sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		sdmmc3_vdd_default: pinmux-sdmmc3-vdd-default {
+			gmi_clk_pk1 {
+				nvidia,pins = "gmi_clk_pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		vdd_lcd_default: pinmux-vdd-lcd-default {
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		/* GPS */
+	};
+
+	serial@70006200 {
+		/* Bluetooth */
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm_default>;
+		pinctrl-1 = <&pwm_sleep>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		magnetometer@c {
+			compatible = "asahi-kasei,ak09911";
+			reg = <0xc>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+
+		rt5639: audio-codec@1c {
+			compatible = "realtek,rt5639";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+
+			realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&codec_default>;
+		};
+
+		temp_sensor: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		motion-tracker@68 {
+			compatible = "invensense,mpu6500";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(R, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			mount-matrix =  "0", "-1", "0",
+					"1",  "0", "0",
+					"0",  "0", "1";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&imu_default>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		power-sensor@44 {
+			compatible = "ti,ina230";
+			reg = <0x44>;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		light-sensor@1c {
+			compatible = "dynaimage,al3320a";
+			reg = <0x1c>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+	};
+
+	i2c@7000c700 {
+		/* HDMI DDC */
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		palmas: pmic@58 {
+			compatible = "ti,tps65913", "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				ti,palmas-enable-dvfs1;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					pin_gpio1 {
+						pins = "gpio1";
+						function = "gpio";
+					};
+
+					pin_gpio2 {
+						pins = "gpio2";
+						function = "gpio";
+					};
+
+					pin_gpio3 {
+						pins = "gpio3";
+						function = "gpio";
+					};
+
+					pin_gpio4 {
+						pins = "gpio4";
+						function = "gpio";
+					};
+
+					pin_gpio5 {
+						pins = "gpio5";
+						function = "gpio";
+					};
+
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+
+					pin_gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+					};
+
+					pin_powergood {
+						pins = "powergood";
+						function = "powergood";
+					};
+
+					pin_vac {
+						pins = "vac";
+						function = "vac";
+					};
+				};
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				ldo1-in-supply = <&tps65913_smps7>;
+				ldo2-in-supply = <&tps65913_smps7>;
+				ldo4-in-supply = <&tps65913_smps8>;
+				ldo5-in-supply = <&tps65913_smps9>;
+				ldo6-in-supply = <&tps65913_smps9>;
+				ldo7-in-supply = <&tps65913_smps9>;
+				ldo9-in-supply = <&tps65913_smps9>;
+
+				regulators {
+					tps65913_smps123: smps123 {
+						regulator-name = "vdd-cpu";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <1>;
+						ti,mode-sleep = <3>;
+					};
+
+					tps65913_smps45: smps45 {
+						regulator-name = "vdd-core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <3>;
+					};
+
+					smps6 {
+						regulator-name = "va-lcd-hv";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_smps7: smps7 {
+						regulator-name = "vdd-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_smps8: smps8 {
+						regulator-name = "vdd-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_smps9: smps9 {
+						regulator-name = "vdd-sd";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-always-on;
+					};
+
+					tps65913_smps10_out1: smps10_out1 {
+						regulator-name = "vd-smps10-out1";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_smps10_out2: smps10_out2 {
+						regulator-name = "vd-smps10-out2";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_ldo1: ldo1 {
+						regulator-name = "vdd-hdmi-pll";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						ti,roof-floor = <3>;
+					};
+
+					tps65913_ldo2: ldo2 {
+						regulator-name = "vdd-2v8-dsi-csi";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo4 {
+						regulator-name = "vdd-1v2-cam";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					ldo5 {
+						regulator-name = "vdd-cam";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo6 {
+						regulator-name = "vdd-dev";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+						regulator-boot-on;
+					};
+
+					ldo7 {
+						regulator-name = "vdd-2v8-cam";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					tps65913_ldo8: ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <950000>;
+						regulator-max-microvolt = <950000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					tps65913_ldo9: ldo9 {
+						regulator-name = "vdd-sdmmc";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2900000>;
+					};
+
+					tps65913_ldoln: ldoln {
+						regulator-name = "vdd-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldousb {
+						regulator-name = "vdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+		};
+	};
+
+	ahub@70080000 {
+		i2s@70080300 {
+			status = "okay";
+		};
+	};
+
+	mmc@78000000 {
+		/* WiFi */
+	};
+
+	/* MicroSD card */
+	mmc@78000400 {
+		status = "okay";
+
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+
+		nvidia,default-tap = <0x3>;
+		nvidia,default-trim = <0x3>;
+
+		vmmc-supply = <&vdd_usd>;
+		vqmmc-supply = <&tps65913_ldo9>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc3_default>;
+	};
+
+	mmc@78000600 {
+		/* eMMC */
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra114-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+
+		/* Peripheral USB via ASUS connector */
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+	};
+
+	usb@7d008000 {
+		status = "okay";
+
+		/* Host USB via dock */
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_sys>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <224>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_default>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		label = "GPIO Hall Effect Sensor";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+
+		switch-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		label = "GPIO Buttons";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		button-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		button-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5639-tf701t",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "Asus Transformer Pad TF701T RT5639";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s0>;
+		nvidia,audio-codec = <&rt5639>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
+			 <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA114_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA114_CLK_EXTERN1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_default>;
+	};
+
+	vdd_5v0_sys: regulator-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_lcd: regulator-vdd-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_lcd_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&tps65913_smps8>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_lcd_default>;
+	};
+
+	vdd_usd: regulator-vdd-usd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_sd_slot";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		vin-supply = <&tps65913_smps9>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc3_vdd_default>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra114-dalmore.dts b/arch/arm/boot/dts/nvidia/tegra114-dalmore.dts
new file mode 100644
index 0000000000000..a685fcb129d00
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra114-dalmore.dts
@@ -0,0 +1,1287 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This dts file supports Dalmore A04.
+ * Other board revisions are not supported
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "NVIDIA Tegra114 Dalmore evaluation board";
+	compatible = "nvidia,dalmore", "nvidia,tegra114";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps65913@58";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			vdd-supply = <&vdd_hdmi_reg>;
+			pll-supply = <&palmas_smps3_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&avdd_1v2_reg>;
+
+			panel@0 {
+				compatible = "panasonic,vvx10f004b00";
+				reg = <0>;
+
+				power-supply = <&avdd_lcd_reg>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2",
+						"dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+						"dap2_fs_pa2",
+						"dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_fs_pp4",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+						"dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0",
+						"pbb0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5",
+						"gmi_cs6_n_pi3",
+						"gmi_wr_n_pi0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6",
+						"gmi_ad7_pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2",
+						"gmi_oe_n_pi1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"kb_col4_pq4",
+						"sdmmc3_clk_lb_out_pee4",
+						"sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1",
+						"dap3_sclk_pp3";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4",
+						"gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+						"pbb5",
+						"pbb6",
+						"pbb7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1",
+						"pcc2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad11_ph3",
+						"gmi_ad13_ph5",
+						"gmi_ad8_ph0",
+						"gmi_clk_pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2",
+						"gmi_ad3_pg3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0",
+						"gmi_cs0_n_pj0",
+						"gmi_cs2_n_pk3",
+						"gmi_cs4_n_pk2",
+						"gmi_cs7_n_pi6",
+						"gmi_dqs_p_pj3",
+						"gmi_iordy_pi5",
+						"gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs3_n_pk4 {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3",
+						"kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3",
+						"kb_row4_pr4",
+						"kb_row6_pr6",
+						"kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5",
+						"pu6";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2",
+						"usb_vbus_en1_pn5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <22>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <1>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		battery: smart-battery@b {
+			compatible = "ti,bq20z45", "sbs,sbs-battery";
+			reg = <0xb>;
+			sbs,i2c-retry-count = <2>;
+			sbs,poll-retry-count = <100>;
+			power-supplies = <&charger>;
+		};
+
+		rt5640: rt5640@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+			realtek,ldo1-en-gpios =
+				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&palmas_ldo6_reg>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		tps51632@43 {
+			compatible = "ti,tps51632";
+			reg = <0x43>;
+			regulator-name = "vdd-cpu";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		tps65090@48 {
+			compatible = "ti,tps65090";
+			reg = <0x48>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(J, 0) IRQ_TYPE_LEVEL_HIGH>;
+
+			vsys1-supply = <&vdd_ac_bat_reg>;
+			vsys2-supply = <&vdd_ac_bat_reg>;
+			vsys3-supply = <&vdd_ac_bat_reg>;
+			infet1-supply = <&vdd_ac_bat_reg>;
+			infet2-supply = <&vdd_ac_bat_reg>;
+			infet3-supply = <&tps65090_dcdc2_reg>;
+			infet4-supply = <&tps65090_dcdc2_reg>;
+			infet5-supply = <&tps65090_dcdc2_reg>;
+			infet6-supply = <&tps65090_dcdc2_reg>;
+			infet7-supply = <&tps65090_dcdc2_reg>;
+			vsys-l1-supply = <&vdd_ac_bat_reg>;
+			vsys-l2-supply = <&vdd_ac_bat_reg>;
+
+			charger: charger {
+				compatible = "ti,tps65090-charger";
+				ti,enable-low-current-chrg;
+			};
+
+			regulators {
+				tps65090_dcdc1_reg: dcdc1 {
+					regulator-name = "vdd-sys-5v0";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				tps65090_dcdc2_reg: dcdc2 {
+					regulator-name = "vdd-sys-3v3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				tps65090_dcdc3_reg: dcdc3 {
+					regulator-name = "vdd-ao";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_bl_reg: fet1 {
+					regulator-name = "vdd-lcd-bl";
+				};
+
+				fet3 {
+					regulator-name = "vdd-modem-3v3";
+				};
+
+				avdd_lcd_reg: fet4 {
+					regulator-name = "avdd-lcd";
+				};
+
+				fet5 {
+					regulator-name = "vdd-lvds";
+				};
+
+				fet6 {
+					regulator-name = "vdd-sd-slot";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				fet7 {
+					regulator-name = "vdd-com-3v3";
+				};
+
+				ldo1 {
+					regulator-name = "vdd-sby-5v0";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd-sby-3v3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+
+		palmas: tps65913@58 {
+			compatible = "ti,tps65913", "ti,palmas";
+			reg = <0x58>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+				};
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+				smps1-in-supply = <&tps65090_dcdc3_reg>;
+				smps3-in-supply = <&tps65090_dcdc3_reg>;
+				smps4-in-supply = <&tps65090_dcdc2_reg>;
+				smps7-in-supply = <&tps65090_dcdc2_reg>;
+				smps8-in-supply = <&tps65090_dcdc2_reg>;
+				smps9-in-supply = <&tps65090_dcdc2_reg>;
+				ldo1-in-supply = <&tps65090_dcdc2_reg>;
+				ldo2-in-supply = <&tps65090_dcdc2_reg>;
+				ldo3-in-supply = <&palmas_smps3_reg>;
+				ldo4-in-supply = <&tps65090_dcdc2_reg>;
+				ldo5-in-supply = <&vdd_ac_bat_reg>;
+				ldo6-in-supply = <&tps65090_dcdc2_reg>;
+				ldo7-in-supply = <&tps65090_dcdc2_reg>;
+				ldo8-in-supply = <&tps65090_dcdc3_reg>;
+				ldo9-in-supply = <&palmas_smps9_reg>;
+				ldoln-in-supply = <&tps65090_dcdc1_reg>;
+				ldousb-in-supply = <&tps65090_dcdc1_reg>;
+
+				regulators {
+					smps12 {
+						regulator-name = "vddio-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					palmas_smps3_reg: smps3 {
+						regulator-name = "vddio-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps45 {
+						regulator-name = "vdd-core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps457 {
+						regulator-name = "vdd-core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps8 {
+						regulator-name = "avdd-pll";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					palmas_smps9_reg: smps9 {
+						regulator-name = "sdhci-vdd-sd-slot";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+					};
+
+					ldo1 {
+						regulator-name = "avdd-cam1";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo2 {
+						regulator-name = "avdd-cam2";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					avdd_1v2_reg: ldo3 {
+						regulator-name = "avdd-dsi-csi";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					ldo4 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					palmas_ldo6_reg: ldo6 {
+						regulator-name = "vdd-sensor-2v85";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo7 {
+						regulator-name = "vdd-af-cam1";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <900000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					ldo9 {
+						regulator-name = "vddio-sdmmc-2";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldoln {
+						regulator-name = "hvdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen1 {
+						regulator-name = "rail-3v3";
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen2 {
+						regulator-name = "rail-5v0";
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		flash@0 {
+			compatible = "winbond,w25q32dw", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	mmc@78000400 {
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	mmc@78000600 {
+		bus-width = <8>;
+		status = "okay";
+		non-removable;
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra114-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&usb3_vbus_reg>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	vdd_ac_bat_reg: regulator-acbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	dvdd_ts_reg: regulator-ts {
+		compatible = "regulator-fixed";
+		regulator-name = "dvdd_ts";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	usb1_vbus_reg: regulator-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&tps65090_dcdc1_reg>;
+	};
+
+	usb3_vbus_reg: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&tps65090_dcdc1_reg>;
+	};
+
+	vdd_hdmi_reg: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_hdmi_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&tps65090_dcdc1_reg>;
+	};
+
+	vdd_cam_1v8_reg: regulator-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_cam_1v8_reg";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&palmas_gpio 6 0>;
+	};
+
+	vdd_5v0_hdmi: regulator-hdmicon {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&tps65090_dcdc1_reg>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-dalmore",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "NVIDIA Tegra Dalmore";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
+			 <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA114_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA114_CLK_EXTERN1>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra114-roth.dts b/arch/arm/boot/dts/nvidia/tegra114-roth.dts
new file mode 100644
index 0000000000000..b9d00009d1f4a
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra114-roth.dts
@@ -0,0 +1,1108 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "NVIDIA SHIELD";
+	compatible = "nvidia,roth", "nvidia,tegra114";
+
+	chosen {
+		/* SHIELD's bootloader's arguments need to be overridden */
+		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:1";
+		/* SHIELD's bootloader will place initrd at this address */
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+
+	aliases {
+		serial0 = &uartd;
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		/* memory >= 0x79600000 is reserved for firmware usage */
+		reg = <0x80000000 0x79600000>;
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_1v2_ap>;
+
+			panel@0 {
+				compatible = "lg,lh500wx1-sd03";
+				reg = <0>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2",
+						"dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+						"dap2_fs_pa2",
+						"dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_fs_pp4",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+						"dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0",
+						"pbb0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5",
+						"gmi_wr_n_pi0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6",
+						"gmi_ad7_pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs6_n_pi13 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2",
+						"gmi_oe_n_pi1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_cd_n_pv2",
+						"sdmmc3_clk_lb_out_pee4",
+						"sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2",
+						"kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs0_n_pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4",
+						"gpio_x5_aud_px5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+						"pbb5",
+						"pbb6",
+						"pbb7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1",
+						"pcc2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad12_ph4",
+						"gmi_ad15_ph7",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3",
+						"gmi_ad13_ph5",
+						"gmi_ad8_ph0",
+						"gmi_clk_pk1",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad14_ph6 {
+				nvidia,pins = "gmi_ad14_ph6",
+						"gmi_cs0_n_pj0",
+						"gmi_cs4_n_pk2",
+						"gmi_cs7_n_pi6",
+						"gmi_dqs_p_pj3",
+						"gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2",
+						"gmi_ad3_pg3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3",
+						"kb_row4_pr4",
+						"kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	/* Usable on reworked devices only */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		regulator@43 {
+			compatible = "ti,tps51632";
+			reg = <0x43>;
+			regulator-name = "vdd-cpu";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		palmas: pmic@58 {
+			compatible = "ti,tps65913", "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				regulators {
+					smps12 {
+						regulator-name = "vdd-ddr";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1500000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8: smps3 {
+						regulator-name = "vdd-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-boot-on;
+					};
+
+					smps457 {
+						regulator-name = "vdd-soc";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps8 {
+						regulator-name = "avdd-pll-1v05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps9 {
+						regulator-name = "vdd-2v85-emmc";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+					};
+
+					smps10_out1 {
+						regulator-name = "vdd-fan";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps10_out2 {
+						regulator-name = "vdd-5v0-sys";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo2 {
+						regulator-name = "vdd-2v8-display";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v2_ap: ldo3 {
+						regulator-name = "avdd-1v2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo5 {
+						regulator-name = "avdd-hdmi-pll";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					ldo6 {
+						regulator-name = "vdd-sensor-2v8";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					vddio_sdmmc3: ldo9 {
+						regulator-name = "vddio-sdmmc3";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_3v3_sys: regen1 {
+						regulator-name = "rail-3v3";
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen2 {
+						regulator-name = "rail-5v0";
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* SD card */
+	mmc@78000400 {
+		status = "okay";
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	/* eMMC */
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	/* External USB port (must be powered) */
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		/* Should be changed to "otg" once we have vbus_supply */
+		/* As of now, USB devices need to be powered externally */
+		dr_mode = "host";
+	};
+
+	/* SHIELD controller */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 40000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&lcd_bl_en>;
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	lcd_bl_en: regulator-lcden {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_bl_en";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vdd_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_lcd_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_1v8>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
+
+	regulator-1v8ts {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_ts";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+	};
+
+	regulator-3v3ts {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_ts";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
+
+	regulator-1v8com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_com";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_1v8>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
+
+	regulator-3v3com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_sys>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra114-tn7.dts b/arch/arm/boot/dts/nvidia/tegra114-tn7.dts
new file mode 100644
index 0000000000000..f02d8c79eee76
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra114-tn7.dts
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "Tegra Note 7";
+	compatible = "nvidia,tn7", "nvidia,tegra114";
+
+	chosen {
+		/* TN7's bootloader's arguments need to be overridden */
+		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2";
+		/* TN7's bootloader will place initrd at this address */
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+
+	aliases {
+		serial0 = &uartd;
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		/* memory >= 0x37e00000 is reserved for firmware usage */
+		reg = <0x80000000 0x37e00000>;
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_1v2_ap>;
+
+			panel@0 {
+				compatible = "lg,ld070wx3-sl01";
+				reg = <0>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		palmas: pmic@58 {
+			compatible = "ti,tps65913", "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				ldoln-in-supply = <&vdd_smps10_out2>;
+
+				regulators {
+					smps123 {
+						regulator-name = "vd-cpu";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps45 {
+						regulator-name = "vd-soc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps6 {
+						regulator-name = "va-lcd-hv";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps7 {
+						regulator-name = "vd-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8: smps8 {
+						regulator-name = "vs-pmu-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_2v9_sys: smps9 {
+						regulator-name = "vs-sys-2v9";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out1: smps10_out1 {
+						regulator-name = "vd-smps10-out1";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out2: smps10_out2 {
+						regulator-name = "vd-smps10-out2";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo1 {
+						regulator-name = "va-pllx";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v2_ap: ldo2 {
+						regulator-name = "va-ap-1v2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "vd-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vd-ts-hv";
+						regulator-min-microvolt = <3200000>;
+						regulator-max-microvolt = <3200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo5 {
+						regulator-name = "va-cam2-hv";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					ldo6 {
+						regulator-name = "va-sns-hv";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo7 {
+						regulator-name = "va-cam1-hv";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					ldo8 {
+						regulator-name = "va-ap-rtc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						ti,enable-ldo8-tracking;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo9 {
+						regulator-name = "vi-sdcard";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldoln {
+						regulator-name = "va-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* eMMC */
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		/* Should be changed to "otg" once we have vbus_supply */
+		/* As of now, USB devices need to be powered externally */
+		dr_mode = "host";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 40000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&lcd_bl_en>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	/* FIXME: output of BQ24192 */
+	vs_sys: regulator-vs {
+		compatible = "regulator-fixed";
+		regulator-name = "VS_SYS";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lcd_bl_en: regulator-lcden {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_LCD_BL";
+		regulator-min-microvolt = <16500000>;
+		regulator-max-microvolt = <16500000>;
+		gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vs_sys>;
+		regulator-boot-on;
+	};
+
+	vdd_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "VD_LCD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8>;
+		regulator-boot-on;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra114.dtsi b/arch/arm/boot/dts/nvidia/tegra114.dtsi
new file mode 100644
index 0000000000000..09996acad6399
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra114.dtsi
@@ -0,0 +1,850 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra114-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra114-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/tegra-pmc.h>
+
+/ {
+	compatible = "nvidia,tegra114";
+	interrupt-parent = <&lic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x0>;
+	};
+
+	sram@40000000 {
+		compatible = "mmio-sram";
+		reg = <0x40000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000>;
+
+		vde_pool: sram@400 {
+			reg = <0x400 0x3fc00>;
+			pool;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra114-host1x";
+		reg = <0x50000000 0x00028000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&tegra_car TEGRA114_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA114_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
+		iommus = <&mc TEGRA_SWGROUP_HC>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x01000000>;
+
+		gr2d@54140000 {
+			compatible = "nvidia,tegra114-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_GR2D>;
+			resets = <&tegra_car 21>, <&mc TEGRA114_MC_RESET_2D>;
+			reset-names = "2d", "mc";
+
+			iommus = <&mc TEGRA_SWGROUP_G2>;
+		};
+
+		gr3d@54180000 {
+			compatible = "nvidia,tegra114-gr3d";
+			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA114_CLK_GR3D>;
+			resets = <&tegra_car 24>, <&mc TEGRA114_MC_RESET_3D>;
+			reset-names = "3d", "mc";
+
+			iommus = <&mc TEGRA_SWGROUP_NV>;
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra114-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_DISP1>,
+				 <&tegra_car TEGRA114_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra114-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_DISP2>,
+				 <&tegra_car TEGRA114_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra114-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_HDMI>,
+				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		dsia: dsi@54300000 {
+			compatible = "nvidia,tegra114-dsi";
+			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA114_CLK_DSIA>,
+				 <&tegra_car TEGRA114_CLK_DSIALP>,
+				 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		dsib: dsi@54400000 {
+			compatible = "nvidia,tegra114-dsi";
+			reg = <0x54400000 0x00040000>;
+			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
+				 <&tegra_car TEGRA114_CLK_DSIBLP>,
+				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 82>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x50041000 0x1000>,
+		      <0x50042000 0x1000>,
+		      <0x50044000 0x2000>,
+		      <0x50046000 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra114-ictlr", "nvidia,tegra30-ictlr";
+		reg = <0x60004000 0x100>,
+		      <0x60004100 0x50>,
+		      <0x60004200 0x50>,
+		      <0x60004300 0x50>,
+		      <0x60004400 0x50>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra114-timer", "nvidia,tegra30-timer";
+		reg = <0x60005000 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra114-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra114-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
+
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra114-apbdma";
+		reg = <0x6000a000 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	ahb: ahb@6000c000 {
+		compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
+		reg = <0x6000c000 0x150>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		gpio-ranges = <&pinmux 0 0 246>;
+	};
+
+	vde@6001a000 {
+		compatible = "nvidia,tegra114-vde";
+		reg = <0x6001a000 0x1000>, /* Syntax Engine */
+		      <0x6001b000 0x1000>, /* Video Bitstream Engine */
+		      <0x6001c000  0x100>, /* Macroblock Engine */
+		      <0x6001c200  0x100>, /* Post-processing Engine */
+		      <0x6001c400  0x100>, /* Motion Compensation Engine */
+		      <0x6001c600  0x100>, /* Transform Engine */
+		      <0x6001c800  0x100>, /* Pixel prediction block */
+		      <0x6001ca00  0x100>, /* Video DMA */
+		      <0x6001d800  0x400>; /* Video frame controls */
+		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+			    "tfe", "ppb", "vdma", "frameid";
+		iram = <&vde_pool>; /* IRAM region */
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
+		interrupt-names = "sync-token", "bsev", "sxe";
+		clocks = <&tegra_car TEGRA114_CLK_VDE>;
+		reset-names = "vde", "mc";
+		resets = <&tegra_car 61>, <&mc TEGRA114_MC_RESET_VDE>;
+		iommus = <&mc TEGRA_SWGROUP_VDE>;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64>, /* Chip revision */
+		      <0x70000008 0x04>; /* Strapping options */
+	};
+
+	pinmux: pinmux@70000868 {
+		compatible = "nvidia,tegra114-pinmux";
+		reg = <0x70000868 0x148>, /* Pad control registers */
+		      <0x70003000 0x40c>; /* Mux registers */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA114_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d400 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d600 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d800 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000da00 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000dc00 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC5>;
+		clock-names = "spi";
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000de00 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC6>;
+		clock-names = "spi";
+		resets = <&tegra_car 105>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_RTC>;
+	};
+
+	kbc@7000e200 {
+		compatible = "nvidia,tegra114-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_KBC>;
+		resets = <&tegra_car 36>;
+		reset-names = "kbc";
+		status = "disabled";
+	};
+
+	tegra_pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra114-pmc";
+		reg = <0x7000e400 0x400>;
+		clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra114-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA114_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@70019000 {
+		compatible = "nvidia,tegra114-mc";
+		reg = <0x70019000 0x1000>;
+		clocks = <&tegra_car TEGRA114_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#reset-cells = <1>;
+		#iommu-cells = <1>;
+	};
+
+	ahub@70080000 {
+		compatible = "nvidia,tegra114-ahub";
+		reg = <0x70080000 0x200>,
+		      <0x70080200 0x100>,
+		      <0x70081000 0x200>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA114_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>,  /* spdif */
+			 <&tegra_car 153>, /* amx */
+			 <&tegra_car 154>; /* adx */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif", "amx", "adx";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>,
+		       <&apbdma 6>, <&apbdma 6>,
+		       <&apbdma 7>, <&apbdma 7>,
+		       <&apbdma 12>, <&apbdma 12>,
+		       <&apbdma 13>, <&apbdma 13>,
+		       <&apbdma 14>, <&apbdma 14>,
+		       <&apbdma 29>, <&apbdma 29>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+			    "rx9", "tx9";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		tegra_i2s0: i2s@70080300 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080300 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S0>;
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@70080400 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080400 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S1>;
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@70080500 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080500 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S2>;
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@70080600 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080600 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S3>;
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@70080700 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080700 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S4>;
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	mipi: mipi@700e3000 {
+		compatible = "nvidia,tegra114-mipi";
+		reg = <0x700e3000 0x100>;
+		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+		#nvidia,mipi-calibrate-cells = <1>;
+	};
+
+	mmc@78000000 {
+		compatible = "nvidia,tegra114-sdhci";
+		reg = <0x78000000 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@78000200 {
+		compatible = "nvidia,tegra114-sdhci";
+		reg = <0x78000200 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC2>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@78000400 {
+		compatible = "nvidia,tegra114-sdhci";
+		reg = <0x78000400 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC3>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@78000600 {
+		compatible = "nvidia,tegra114-sdhci";
+		reg = <0x78000600 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC4>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000>,
+		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000>,
+		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 2>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/nvidia/tegra124-apalis-emc.dtsi
new file mode 100644
index 0000000000000..970f33dd9101e
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-emc.dtsi
@@ -0,0 +1,1487 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016-2019 Toradex AG
+ *
+ */
+
+#include <dt-bindings/clock/tegra124-car.h>
+
+/ {
+	clock@60006000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+				nvidia,parent-clock-frequency = <924000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+	};
+
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 0x8000000a
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x77e30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 0x80000012
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x76230303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 0x80000017
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74a30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 0x8000001e
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74230403 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 0x80000026
+					0x00000001 0x00000001
+					0x00000003 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0503
+					0x73c30504 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 0x80000040
+					0x00000001 0x00000001
+					0x00000004 0x00000002
+					0x00000003 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000004 0x00000006
+					0x06040203 0x000a0504
+					0x73840a05 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 0x80000040
+					0x00000001 0x00000002
+					0x00000007 0x00000004
+					0x00000004 0x00000001
+					0x00000002 0x00000007
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000b0607
+					0x77450e08 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 0x80000040
+					0x00000001 0x00000002
+					0x00000009 0x00000005
+					0x00000006 0x00000001
+					0x00000002 0x00000008
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000d0709
+					0x7586120a 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 0x80000040
+					0x00000002 0x00000003
+					0x0000000c 0x00000007
+					0x00000008 0x00000001
+					0x00000002 0x00000009
+					0x00000002 0x00000002
+					0x00000005 0x00000006
+					0x06050202 0x0010090c
+					0x7428180d 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 0x80000040
+					0x00000003 0x00000004
+					0x0000000e 0x00000009
+					0x0000000a 0x00000001
+					0x00000003 0x0000000b
+					0x00000002 0x00000002
+					0x00000005 0x00000007
+					0x07050202 0x00130b0e
+					0x73a91b0f 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b 0x80000040
+					0x00000004 0x00000005
+					0x00000013 0x0000000c
+					0x0000000d 0x00000002
+					0x00000003 0x0000000c
+					0x00000002 0x00000002
+					0x00000006 0x00000008
+					0x08060202 0x00170e13
+					0x736c2414 0x70000f02
+					0x001f0000
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000d 0x80000040
+					0x00000005 0x00000006
+					0x00000016 0x0000000e
+					0x0000000f 0x00000002
+					0x00000004 0x0000000e
+					0x00000002 0x00000002
+					0x00000006 0x00000009
+					0x09060202 0x001a1016
+					0x734e2a17 0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+
+	external-memory-controller@7001b000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 0x00000003
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000060
+					0x00000000 0x00000018
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000007 0x0000000f
+					0x00000005 0x00000005
+					0x00000004 0x00000005
+					0x00000004 0x00000000
+					0x00000000 0x00000005
+					0x00000005 0x00000064
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000007 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x800001c5
+					0x0000000a
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 0x00000005
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x0000009a
+					0x00000000 0x00000026
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000007 0x0000000f
+					0x00000006 0x00000006
+					0x00000004 0x00000005
+					0x00000004 0x00000000
+					0x00000000 0x00000005
+					0x00000005 0x000000a0
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x0000000b 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x8000023a
+					0x0000000a
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001 0x0000000a
+					0x00000000 0x00000001
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000134
+					0x00000000 0x0000004d
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000008 0x0000000f
+					0x0000000c 0x0000000c
+					0x00000004 0x00000005
+					0x00000004 0x00000000
+					0x00000000 0x00000005
+					0x00000005 0x0000013f
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000015 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x80000370
+					0x0000000a
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003 0x00000011
+					0x00000000 0x00000002
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000202
+					0x00000000 0x00000080
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x0000000f 0x0000000f
+					0x00000013 0x00000013
+					0x00000004 0x00000005
+					0x00000004 0x00000001
+					0x00000000 0x00000005
+					0x00000005 0x00000213
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000022 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x8000050e
+					0x0000000a
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004 0x0000001a
+					0x00000000 0x00000003
+					0x00000001 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000001
+					0x00000001 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000304
+					0x00000000 0x000000c1
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000018 0x0000000f
+					0x0000001c 0x0000001c
+					0x00000004 0x00000005
+					0x00000004 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x0000031c
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000033 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x80000713
+					0x0000000a
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008cd>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009 0x00000035
+					0x00000000 0x00000006
+					0x00000002 0x00000005
+					0x0000000a 0x00000005
+					0x0000000b 0x00000002
+					0x00000002 0x00000003
+					0x00000003 0x00000000
+					0x00000005 0x00000005
+					0x00000006 0x00000002
+					0x00000000 0x00000004
+					0x00000006 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000003
+					0x0000000d 0x0000000f
+					0x00000011 0x00000607
+					0x00000000 0x00000181
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000032 0x0000000f
+					0x00000038 0x00000038
+					0x00000004 0x00000005
+					0x00000004 0x00000006
+					0x00000000 0x00000005
+					0x00000005 0x00000638
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00008000 0x00000000
+					0x00000000 0x00008000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00090000 0x00090000
+					0x00090000 0x00090000
+					0x00009000 0x00009000
+					0x00009000 0x00009000
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000707 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000066 0x00000000
+					0x00000100 0x000e000e
+					0x00000000 0x00000003
+					0x0000d2b3 0x80000d22
+					0x0000000a
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0173000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d 0x0000004d
+					0x00000000 0x00000009
+					0x00000003 0x00000004
+					0x00000008 0x00000002
+					0x00000009 0x00000003
+					0x00000003 0x00000002
+					0x00000002 0x00000000
+					0x00000003 0x00000003
+					0x00000005 0x00000002
+					0x00000000 0x00000002
+					0x00000007 0x00020000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000001
+					0x0000000e 0x00000010
+					0x00000012 0x000008e4
+					0x00000000 0x00000239
+					0x00000001 0x00000008
+					0x00000001 0x00000000
+					0x0000004b 0x0000000e
+					0x00000052 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x00000008
+					0x00000000 0x00000005
+					0x00000005 0x00000924
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0x002c00a0 0x00008000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00098000 0x00098000
+					0x00000000 0x00098000
+					0x00098000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00050000 0x00050000
+					0x00050000 0x00050000
+					0x00005000 0x00005000
+					0x00005000 0x00005000
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000096 0x00000000
+					0x00000100 0x0173000e
+					0x00000000 0x00000003
+					0x000052a3 0x800012d7
+					0x00000009
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-mrs-wait-cnt = <0x015b000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000011 0x00000066
+					0x00000000 0x0000000c
+					0x00000004 0x00000004
+					0x00000008 0x00000002
+					0x0000000a 0x00000004
+					0x00000004 0x00000002
+					0x00000002 0x00000000
+					0x00000003 0x00000003
+					0x00000005 0x00000002
+					0x00000000 0x00000001
+					0x00000008 0x00020000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0000000f 0x00000010
+					0x00000012 0x00000bd1
+					0x00000000 0x000002f4
+					0x00000001 0x00000008
+					0x00000001 0x00000000
+					0x00000063 0x0000000f
+					0x0000006c 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x0000000b
+					0x00000000 0x00000005
+					0x00000005 0x00000c11
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0x002c00a0 0x00008000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00070000 0x00070000
+					0x00000000 0x00070000
+					0x00070000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00038000 0x00038000
+					0x00038000 0x00038000
+					0x00003800 0x00003800
+					0x00003800 0x00003800
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x000000c6 0x00000000
+					0x00000100 0x015b000e
+					0x00000000 0x00000003
+					0x000052a3 0x8000188b
+					0x00000009
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000941>;
+				nvidia,emc-mrs-wait-cnt = <0x0139000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123133d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000018 0x00000088
+					0x00000000 0x00000010
+					0x00000006 0x00000006
+					0x00000009 0x00000002
+					0x0000000d 0x00000006
+					0x00000006 0x00000002
+					0x00000002 0x00000000
+					0x00000003 0x00000003
+					0x00000006 0x00000002
+					0x00000000 0x00000001
+					0x00000009 0x00030000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000010 0x00000012
+					0x00000014 0x00000fd6
+					0x00000000 0x000003f5
+					0x00000002 0x0000000b
+					0x00000001 0x00000000
+					0x00000085 0x00000012
+					0x00000090 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x00000010
+					0x00000000 0x00000006
+					0x00000006 0x00001017
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0xe01200b1 0x00008000
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00054000 0x00054000
+					0x00000000 0x00054000
+					0x00054000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0000000c 0x0000000c
+					0x0000000c 0x0000000c
+					0x0000000c 0x0000000c
+					0x0000000c 0x0000000c
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0606003f
+					0x00000000 0x00000000
+					0x00000100 0x0139000e
+					0x00000000 0x00000003
+					0x000042a0 0x80002062
+					0x0000000a
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x0127000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001b 0x0000009b
+					0x00000000 0x00000013
+					0x00000007 0x00000007
+					0x0000000b 0x00000003
+					0x00000010 0x00000007
+					0x00000007 0x00000002
+					0x00000002 0x00000000
+					0x00000005 0x00000005
+					0x0000000a 0x00000002
+					0x00000000 0x00000003
+					0x0000000b 0x00070000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000002
+					0x00000012 0x00000016
+					0x00000018 0x00001208
+					0x00000000 0x00000482
+					0x00000002 0x0000000d
+					0x00000001 0x00000000
+					0x00000097 0x00000015
+					0x000000a3 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x00000013
+					0x00000000 0x00000006
+					0x00000006 0x00001248
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0xe00e00b1 0x00008000
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00048000 0x00048000
+					0x00000000 0x00048000
+					0x00048000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0000000d 0x0000000d
+					0x0000000d 0x0000000d
+					0x0000000d 0x0000000d
+					0x0000000d 0x0000000d
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0606003f
+					0x00000000 0x00000000
+					0x00000100 0x0127000e
+					0x00000000 0x00000003
+					0x000040a0 0x800024aa
+					0x0000000e
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x00f7000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000024 0x000000cd
+					0x00000000 0x00000019
+					0x0000000a 0x00000008
+					0x0000000d 0x00000004
+					0x00000013 0x0000000a
+					0x0000000a 0x00000004
+					0x00000002 0x00000000
+					0x00000006 0x00000006
+					0x0000000b 0x00000002
+					0x00000000 0x00000002
+					0x0000000d 0x00080000
+					0x00000004 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000001
+					0x00000014 0x00000018
+					0x0000001a 0x000017e2
+					0x00000000 0x000005f8
+					0x00000003 0x00000011
+					0x00000001 0x00000000
+					0x000000c7 0x00000018
+					0x000000d7 0x00000200
+					0x00000005 0x00000006
+					0x00000005 0x00000019
+					0x00000000 0x00000008
+					0x00000008 0x00001822
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0xe00700b1 0x00008000
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00034000 0x00034000
+					0x00000000 0x00034000
+					0x00034000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000000 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x61861820
+					0x00514514 0x00514514
+					0x61861800 0x0606003f
+					0x00000000 0x00000000
+					0x00000100 0x00f7000e
+					0x00000000 0x00000004
+					0x00004080 0x80003012
+					0x0000000f
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430303>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200020>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000f15>;
+				nvidia,emc-mrs-wait-cnt = <0x00cd000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x0000004c>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000002b 0x000000f0
+					0x00000000 0x0000001e
+					0x0000000b 0x00000009
+					0x0000000f 0x00000005
+					0x00000016 0x0000000b
+					0x0000000b 0x00000004
+					0x00000002 0x00000000
+					0x00000007 0x00000007
+					0x0000000d 0x00000002
+					0x00000000 0x00000002
+					0x0000000f 0x000a0000
+					0x00000004 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000001
+					0x00000016 0x0000001a
+					0x0000001c 0x00001be7
+					0x00000000 0x000006f9
+					0x00000004 0x00000015
+					0x00000001 0x00000000
+					0x000000e7 0x0000001b
+					0x000000fb 0x00000200
+					0x00000006 0x00000007
+					0x00000006 0x0000001e
+					0x00000000 0x0000000a
+					0x0000000a 0x00001c28
+					0x00000000 0x00000000
+					0x00000000 0x104ab898
+					0xe00400b1 0x00008000
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0002c000 0x0002c000
+					0x00000000 0x0002c000
+					0x0002c000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000008 0x00000008
+					0x00000008 0x00000008
+					0x00000008 0x00000008
+					0x00000008 0x00000008
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000000 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x5d75d720
+					0x00514514 0x00514514
+					0x5d75d700 0x0606003f
+					0x00000000 0x00000000
+					0x00000128 0x00cd000e
+					0x00000000 0x00000004
+					0x00004080 0x800037ea
+					0x00000011
+				>;
+			};
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-1200000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-1200000000-1100;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts b/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts
new file mode 100644
index 0000000000000..2df2d8a6b552d
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016-2019 Toradex AG
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis TK1 on Apalis Evaluation Board";
+	compatible = "toradex,apalis-tk1-eval", "toradex,apalis-tk1",
+		     "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@40";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pcie@1003000 {
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	gpio: gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/*
+	 * GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID)
+	 */
+	i2c@7000c400 {
+		status = "okay";
+	};
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor
+	 * on carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* I2C4 (DDC): unused */
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+	};
+
+	/* SPI4: Apalis SPI2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+	};
+
+	/* Apalis Serial ATA */
+	sata@70020000 {
+		status = "okay";
+		target-5v-supply = <&reg_5v0>;
+		target-12v-supply = <&reg_12v0>;
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		status = "okay";
+	};
+
+	/* Apalis MMC1 */
+	mmc@700b0000 {
+		status = "okay";
+		bus-width = <4>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		vqmmc-supply = <&vddio_sdmmc1>;
+	};
+
+	/* Apalis SD1 */
+	mmc@700b0400 {
+		status = "okay";
+		bus-width = <4>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 3 5000000>; /* BKL1_PWM */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V_SW";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts
new file mode 100644
index 0000000000000..f4521fd15f6ad
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2016-2018 Toradex AG
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis TK1 on Apalis Evaluation Board";
+	compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval",
+		     "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
+		     "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@40";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pcie@1003000 {
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor
+	 * on carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/*
+	 * I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207
+	 * (e.g. display EDID)
+	 */
+	i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+	};
+
+	/* SPI4: Apalis SPI2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+	};
+
+	/* Apalis Serial ATA */
+	sata@70020000 {
+		status = "okay";
+		target-5v-supply = <&reg_5v0>;
+		target-12v-supply = <&reg_12v0>;
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		status = "okay";
+	};
+
+	/* Apalis MMC1 */
+	mmc@700b0000 {
+		status = "okay";
+		bus-width = <4>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		vqmmc-supply = <&vddio_sdmmc1>;
+	};
+
+	/* Apalis SD1 */
+	mmc@700b0400 {
+		status = "okay";
+		bus-width = <4>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 3 5000000>; /* BKL1_PWM */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V_SW";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2.dtsi
new file mode 100644
index 0000000000000..75cfe718737cd
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2.dtsi
@@ -0,0 +1,2076 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2016-2018 Toradex AG
+ */
+
+#include "tegra124.dtsi"
+#include "tegra124-apalis-emc.dtsi"
+
+/*
+ * Toradex Apalis TK1 Module Device Tree
+ * Compatible for Revisions 2GB: V1.2A
+ */
+/ {
+	memory@80000000 {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+
+		avddio-pex-supply = <&reg_1v05_vdd>;
+		avdd-pex-pll-supply = <&reg_1v05_vdd>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		dvddio-pex-supply = <&reg_1v05_vdd>;
+		hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+		hvdd-pex-supply = <&reg_module_3v3>;
+		vddio-pex-ctl-supply = <&reg_module_3v3>;
+
+		/* Apalis PCIe (additional lane Apalis type specific) */
+		pci@1,0 {
+			/* PCIE1_RX/TX and TS_DIFF1/2 */
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+			phy-names = "pcie-0", "pcie-1";
+		};
+
+		/* I210 Gigabit Ethernet Controller (On-module) */
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
+			phy-names = "pcie-0";
+			status = "okay";
+
+			ethernet@0,0 {
+				reg = <0 0 0 0 0>;
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v05_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+		};
+	};
+
+	gpu@57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&reg_vdd_gpu>;
+	};
+
+	gpio@6000d000 {
+		/* I210 Gigabit Ethernet Controller Reset */
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET_N";
+		};
+
+		/* Control MXM3 pin 26 Reset Module Output Carrier Input */
+		reset-moci-ctrl-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "RESET_MOCI_CTRL";
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			dap3-fs-pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-din-pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-dout-pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-sclk-pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap-mclk1-pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_ON */
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAM1_MCLK */
+			cam-mclk-pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis Digital Audio */
+			dap2-fs-pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2-sclk-pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2-din-pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2-dout-pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 { /* DAP1_RESET */
+				nvidia,pins = "pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3-out-pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis GPIO */
+			usb-vbus-en0-pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb-vbus-en1-pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pex-l0-rst-n-pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l0-clkreq-n-pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l1-rst-n-pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l1-clkreq-n-pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp-hpd-pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			owr { /* PEX_L1_CLKREQ_N multiplexed GPIO6 */
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_CEC */
+			hdmi-cec-pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_HPD */
+			hdmi-int-pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis I2C1 */
+			gen1-i2c-scl-pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1-i2c-sda-pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 (CAM) */
+			cam-i2c-scl-pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam-i2c-sda-pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C4 (DDC) */
+			ddc-scl-pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			ddc-sda-pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc1-cd-n-pv3 { /* CD# GPIO */
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-out-pw5 { /* D5 GPIO */
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat3-py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat2-py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat1-py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat0-py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-clk-pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd-pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-req-pcc5 { /* D4 GPIO */
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb-vbus-en2-pff1 { /* D7 GPIO */
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis PWM */
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* PWM3 active on pu6 being Apalis BKL1_PWM as well */
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SATA1_ACT# */
+			dap1-dout-pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc3-clk-pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cmd-pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat3-pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat2-pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat1-pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat0-pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cd-n-pv2 { /* CD# GPIO */
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPDIF */
+			spdif-out-pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif-in-pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-dir-py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-nxt-py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-stp-py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART1 */
+			pb1 { /* DCD GPIO */
+				nvidia,pins = "pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk7 { /* RI GPIO */
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1-txd-pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart1-rxd-pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1-cts-n-pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1-rts-n-pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3-cts-n-pa1 { /* DSR GPIO */
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3-rts-n-pc0 { /* DTR GPIO */
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			uart2-txd-pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2-rxd-pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2-cts-n-pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2-rts-n-pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart3-txd-pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3-rxd-pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart4-rxd-pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart4-txd-pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_EN */
+			gen2-i2c-sda-pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_OC# */
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			gen2-i2c-scl-pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pex-wake-n-pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* CORE_PWR_REQ */
+			core-pwr-req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* CPU_PWR_REQ */
+			cpu-pwr-req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* DVFS */
+			dvfs-pwm-px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs-clk-px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* eMMC */
+			sdmmc4-dat0-paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat1-paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat2-paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat3-paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat4-paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat5-paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat6-paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat7-paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-clk-pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-cmd-pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* JTAG_RTCK */
+			jtag-rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_DEV_OFF# */
+			ulpi-data5-po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_RESET# */
+			kb-row10-ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_WAKE# */
+			ulpi-data4-po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT1# */
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT2# */
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT3# */
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT4# */
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_RESET */
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* MCU SPI */
+			gpio-x4-aud-px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x5-aud-px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x6-aud-px6 { /* MCU_CS */
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x7-aud-px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio-w2-aud-pw2 { /* MCU_CSEZP */
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PMIC_CLK_32K */
+			clk-32k-in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PMIC_CPU_OC_INT */
+			clk-32k-out-pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_I2C */
+			pwr-i2c-scl-pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr-i2c-sda-pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_INT_N */
+			pwr-int-n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* RESET_MOCI_CTRL */
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* RESET_OUT_N */
+			reset-out-n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_IN */
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row1-pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Configure level-shifter as output for HDA */
+			kb-row11-ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_OUT */
+			kb-col5-pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col6-pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col7-pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_OE */
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col1-pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col2-pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col4-pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row2-pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO_PI6 aka TMP451 ALERT#/THERM2# */
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* TOUCH_INT */
+			gpio-w3-aud-pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pc7 { /* NC */
+				nvidia,pins = "pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg0 { /* NC */
+				nvidia,pins = "pg0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg1 { /* NC */
+				nvidia,pins = "pg1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg2 { /* NC */
+				nvidia,pins = "pg2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg3 { /* NC */
+				nvidia,pins = "pg3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg4 { /* NC */
+				nvidia,pins = "pg4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 { /* NC */
+				nvidia,pins = "ph4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph5 { /* NC */
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 { /* NC */
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 { /* NC */
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 { /* NC */
+				nvidia,pins = "pi0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi1 { /* NC */
+				nvidia,pins = "pi1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi2 { /* NC */
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 { /* NC */
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi7 { /* NC */
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 { /* NC */
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 { /* NC */
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 { /* NC */
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 { /* NC */
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-fs-pn0 { /* NC */
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-din-pn1 { /* NC */
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-sclk-pn3 { /* NC */
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data7-po0 { /* NC */
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data0-po1 { /* NC */
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data1-po2 { /* NC */
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data2-po3 { /* NC */
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data3-po4 { /* NC */
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data6-po7 { /* NC */
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-fs-pp4 { /* NC */
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-din-pp5 { /* NC */
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-dout-pp6 { /* NC */
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-sclk-pp7 { /* NC */
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col3-pq3 { /* NC */
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row3-pr3 { /* NC */
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row4-pr4 { /* NC */
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row5-pr5 { /* NC */
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row6-pr6 { /* NC */
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row7-pr7 { /* NC */
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row8-ps0 { /* NC */
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row9-ps1 { /* NC */
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row12-ps4 { /* NC */
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row13-ps5 { /* NC */
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row14-ps6 { /* NC */
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row15-ps7 { /* NC */
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row16-pt0 { /* NC */
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row17-pt1 { /* NC */
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 { /* NC */
+				nvidia,pins = "pu5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * PCB Version Indication: V1.2 and later have GPIO_PV0
+			 * wired to GND, was NC before
+			 */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv1 { /* NC */
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x1-aud-px1 { /* NC */
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x3-aud-px3 { /* NC */
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 { /* NC */
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 { /* NC */
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc2 { /* NC */
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3-req-pee1 { /* NC */
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap-mclk1-req-pee2 { /* NC */
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output
+			 * driver enabled aka not tristated and input driver
+			 * enabled as well as it features some magic properties
+			 * even though the external loopback is disabled and the
+			 * internal loopback used as per
+			 * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
+			 * bits being set to 0xfffd according to the TRM!
+			 */
+			sdmmc3-clk-lb-out-pee4 { /* NC */
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		clock-frequency = <10000>;
+	};
+
+	/* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			#sound-dai-cells = <0>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vddio>;
+			VDDIO-supply = <&reg_1v8_vddio>;
+			clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+			ams,system-power-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0-1-3-4-5-6 {
+					pins = "gpio0", "gpio1", "gpio3",
+					       "gpio4", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+
+				gpio2-7 {
+					pins = "gpio2", /* PWR_EN_+V3.3 */
+					       "gpio7"; /* +V1.6_LPO */
+					function = "gpio";
+					bias-pull-up;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&reg_module_3v3>;
+				vsup-sd3-supply = <&reg_module_3v3>;
+				vsup-sd4-supply = <&reg_module_3v3>;
+				vsup-sd5-supply = <&reg_module_3v3>;
+				vin-ldo0-supply = <&reg_1v35_vddio_ddr>;
+				vin-ldo1-6-supply = <&reg_module_3v3>;
+				vin-ldo2-5-7-supply = <&reg_1v8_vddio>;
+				vin-ldo3-4-supply = <&reg_module_3v3>;
+				vin-ldo9-10-supply = <&reg_module_3v3>;
+				vin-ldo11-supply = <&reg_module_3v3>;
+
+				reg_vdd_cpu: sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				reg_1v35_vddio_ddr: sd2 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				reg_1v05_vdd: sd4 {
+					regulator-name = "+V1.05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				reg_1v8_vddio: sd5 {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				reg_vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				reg_1v05_avdd: ldo0 {
+					regulator-name = "+V1.05_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				vddio_sdmmc1: ldo1 {
+					regulator-name = "VDDIO_SDMMC1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo2 {
+					regulator-name = "+V1.2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+V1.05_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				/* 1.8V for LVDS, 3.3V for eDP */
+				ldo4 {
+					regulator-name = "AVDD_LVDS0_PLL";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				/* LDO5 not used */
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				/* LDO7 not used */
+
+				ldo9 {
+					regulator-name = "+V3.3_ETH(ldo9)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo10 {
+					regulator-name = "+V3.3_ETH(ldo10)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo11 {
+					regulator-name = "+V1.8_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+
+		/*
+		 * TMP451 temperature sensor
+		 * Note: THERM_N directly connected to AS3722 PMIC THERM
+		 */
+		temp-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
+			#thermal-sensor-cells = <1>;
+			vcc-supply = <&reg_module_3v3>;
+		};
+	};
+
+	/* SPI2: MCU SPI */
+	spi@7000d600 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set power_off bit in ResetControl register of AS3722 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x40>;
+			nvidia,reg-addr = <0x36>;
+			nvidia,reg-data = <0x2>;
+		};
+	};
+
+	sata@70020000 {
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
+		phy-names = "sata-0";
+		avdd-supply = <&reg_1v05_vdd>;
+		hvdd-supply = <&reg_module_3v3>;
+		vddio-supply = <&reg_1v05_vdd>;
+	};
+
+	usb@70090000 {
+		/* USBO1, USBO1 (SS), USBH2, USBH4 and USBH4 (SS) */
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
+		phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
+
+		avddio-pex-supply = <&reg_1v05_vdd>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+		avdd-usb-ss-pll-supply = <&reg_1v05_vdd>;
+		avdd-usb-supply = <&reg_module_3v3>;
+		dvddio-pex-supply = <&reg_1v05_vdd>;
+		hvdd-usb-ss-pll-e-supply = <&reg_module_3v3>;
+		hvdd-usb-ss-supply = <&reg_module_3v3>;
+	};
+
+	padctl@7009f000 {
+		avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		avdd-pex-pll-supply = <&reg_1v05_vdd>;
+		hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						status = "okay";
+						nvidia,function = "xusb";
+					};
+
+					usb2-1 {
+						status = "okay";
+						nvidia,function = "xusb";
+					};
+
+					usb2-2 {
+						status = "okay";
+						nvidia,function = "xusb";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						status = "okay";
+						nvidia,function = "usb3-ss";
+					};
+
+					pcie-1 {
+						status = "okay";
+						nvidia,function = "usb3-ss";
+					};
+
+					pcie-2 {
+						status = "okay";
+						nvidia,function = "pcie";
+					};
+
+					pcie-3 {
+						status = "okay";
+						nvidia,function = "pcie";
+					};
+
+					pcie-4 {
+						status = "okay";
+						nvidia,function = "pcie";
+					};
+				};
+			};
+
+			sata {
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						status = "okay";
+						nvidia,function = "sata";
+					};
+				};
+			};
+		};
+
+		ports {
+			/* USBO1 */
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+				usb-role-switch;
+				vbus-supply = <&reg_usbo1_vbus>;
+			};
+
+			/* USBH2 */
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			/* USBH4 */
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			usb3-0 {
+				status = "okay";
+				nvidia,usb2-companion = <2>;
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			usb3-1 {
+				status = "okay";
+				nvidia,usb2-companion = <0>;
+				vbus-supply = <&reg_usbo1_vbus>;
+			};
+		};
+	};
+
+	/* eMMC */
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vddio>; /* VCCQ */
+		mmc-ddr-1_8v;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "okay";
+		nvidia,i2c-fs-rate = <400000>;
+		vdd-cpu-supply = <&reg_vdd_cpu>;
+	};
+
+	ahub@70300000 {
+		i2s@70301200 {
+			status = "okay";
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&reg_vdd_cpu>;
+		};
+	};
+
+	clk32k_in: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.05_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_1v05_vdd>;
+	};
+
+	reg_3v3_mxm: regulator-3v3-mxm {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_MXM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_1v05_vdd>;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		/* PWR_EN_+V3.3 */
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3_mxm>;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_tk1",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis TK1";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mem-thermal {
+			trips {
+				mem-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			trips {
+				gpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra124-apalis.dtsi
new file mode 100644
index 0000000000000..554c8089491c9
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis.dtsi
@@ -0,0 +1,2068 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016-2019 Toradex AG
+ */
+
+#include "tegra124.dtsi"
+#include "tegra124-apalis-emc.dtsi"
+
+/*
+ * Toradex Apalis TK1 Module Device Tree
+ * Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A
+ */
+/ {
+	memory@80000000 {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+		avddio-pex-supply = <&reg_1v05_vdd>;
+		avdd-pex-pll-supply = <&reg_1v05_vdd>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		dvddio-pex-supply = <&reg_1v05_vdd>;
+		hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+		hvdd-pex-supply = <&reg_module_3v3>;
+		vddio-pex-ctl-supply = <&reg_module_3v3>;
+
+		/* Apalis PCIe (additional lane Apalis type specific) */
+		pci@1,0 {
+			/* PCIE1_RX/TX and TS_DIFF1/2 */
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+			phy-names = "pcie-0", "pcie-1";
+		};
+
+		/* I210 Gigabit Ethernet Controller (On-module) */
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
+			phy-names = "pcie-0";
+			status = "okay";
+
+			ethernet@0,0 {
+				reg = <0 0 0 0 0>;
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v05_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+		};
+	};
+
+	gpu@57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&reg_vdd_gpu>;
+	};
+
+	gpio@6000d000 {
+		/* I210 Gigabit Ethernet Controller Reset */
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET_N";
+		};
+
+		/* Control MXM3 pin 26 Reset Module Output Carrier Input */
+		reset-moci-ctrl-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "RESET_MOCI_CTRL";
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			dap3-fs-pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-din-pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-dout-pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-sclk-pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap-mclk1-pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_ON */
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAM1_MCLK */
+			cam-mclk-pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis Digital Audio */
+			dap2-fs-pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2-sclk-pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2-din-pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2-dout-pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 { /* DAP1_RESET */
+				nvidia,pins = "pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3-out-pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis GPIO */
+			ddc-scl-pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ddc-sda-pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l0-rst-n-pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l0-clkreq-n-pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l1-rst-n-pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l1-clkreq-n-pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp-hpd-pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			owr { /* PEX_L1_CLKREQ_N multiplexed GPIO6 */
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_CEC */
+			hdmi-cec-pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_HPD */
+			hdmi-int-pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis I2C1 */
+			gen1-i2c-scl-pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1-i2c-sda-pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C2 (DDC) */
+			gen2-i2c-scl-pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2-i2c-sda-pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 (CAM) */
+			cam-i2c-scl-pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam-i2c-sda-pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc1-cd-n-pv3 { /* CD# GPIO */
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-out-pw5 { /* D5 GPIO */
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat3-py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat2-py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat1-py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat0-py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-clk-pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd-pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-req-pcc5 { /* D4 GPIO */
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb-vbus-en2-pff1 { /* D7 GPIO */
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis PWM */
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* PWM3 active on pu6 being Apalis BKL1_PWM as well */
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SATA1_ACT# */
+			dap1-dout-pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc3-clk-pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cmd-pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat3-pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat2-pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat1-pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat0-pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cd-n-pv2 { /* CD# GPIO */
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPDIF */
+			spdif-out-pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif-in-pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-dir-py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-nxt-py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-stp-py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART1 */
+			pb1 { /* DCD GPIO */
+				nvidia,pins = "pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk7 { /* RI GPIO */
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1-txd-pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart1-rxd-pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1-cts-n-pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1-rts-n-pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3-cts-n-pa1 { /* DSR GPIO */
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3-rts-n-pc0 { /* DTR GPIO */
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			uart2-txd-pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2-rxd-pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2-cts-n-pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2-rts-n-pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart3-txd-pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3-rxd-pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart4-rxd-pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart4-txd-pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_EN */
+			usb-vbus-en1-pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_OC# */
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			usb-vbus-en0-pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pex-wake-n-pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* CORE_PWR_REQ */
+			core-pwr-req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* CPU_PWR_REQ */
+			cpu-pwr-req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* DVFS */
+			dvfs-pwm-px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs-clk-px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* eMMC */
+			sdmmc4-dat0-paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat1-paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat2-paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat3-paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat4-paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat5-paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat6-paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat7-paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-clk-pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-cmd-pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* JTAG_RTCK */
+			jtag-rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_DEV_OFF# */
+			ulpi-data5-po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_RESET# */
+			kb-row10-ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_WAKE# */
+			ulpi-data4-po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT1# */
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT2# */
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT3# */
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT4# */
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_RESET */
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* MCU SPI */
+			gpio-x4-aud-px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x5-aud-px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x6-aud-px6 { /* MCU_CS */
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x7-aud-px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio-w2-aud-pw2 { /* MCU_CSEZP */
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PMIC_CLK_32K */
+			clk-32k-in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PMIC_CPU_OC_INT */
+			clk-32k-out-pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_I2C */
+			pwr-i2c-scl-pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr-i2c-sda-pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_INT_N */
+			pwr-int-n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* RESET_MOCI_CTRL */
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* RESET_OUT_N */
+			reset-out-n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_IN */
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row1-pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Configure level-shifter as output for HDA */
+			kb-row11-ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_OUT */
+			kb-col5-pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col6-pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col7-pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_OE */
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col1-pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col2-pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col4-pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row2-pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO_PI6 aka TMP451 ALERT#/THERM2# */
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* TOUCH_INT */
+			gpio-w3-aud-pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pc7 { /* NC */
+				nvidia,pins = "pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg0 { /* NC */
+				nvidia,pins = "pg0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg1 { /* NC */
+				nvidia,pins = "pg1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg2 { /* NC */
+				nvidia,pins = "pg2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg3 { /* NC */
+				nvidia,pins = "pg3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg4 { /* NC */
+				nvidia,pins = "pg4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 { /* NC */
+				nvidia,pins = "ph4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph5 { /* NC */
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 { /* NC */
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 { /* NC */
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 { /* NC */
+				nvidia,pins = "pi0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi1 { /* NC */
+				nvidia,pins = "pi1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi2 { /* NC */
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 { /* NC */
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi7 { /* NC */
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 { /* NC */
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 { /* NC */
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 { /* NC */
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 { /* NC */
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-fs-pn0 { /* NC */
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-din-pn1 { /* NC */
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-sclk-pn3 { /* NC */
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data7-po0 { /* NC */
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data0-po1 { /* NC */
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data1-po2 { /* NC */
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data2-po3 { /* NC */
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data3-po4 { /* NC */
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data6-po7 { /* NC */
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-fs-pp4 { /* NC */
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-din-pp5 { /* NC */
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-dout-pp6 { /* NC */
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-sclk-pp7 { /* NC */
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col3-pq3 { /* NC */
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row3-pr3 { /* NC */
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row4-pr4 { /* NC */
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row5-pr5 { /* NC */
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row6-pr6 { /* NC */
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row7-pr7 { /* NC */
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row8-ps0 { /* NC */
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row9-ps1 { /* NC */
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row12-ps4 { /* NC */
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row13-ps5 { /* NC */
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row14-ps6 { /* NC */
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row15-ps7 { /* NC */
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row16-pt0 { /* NC */
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row17-pt1 { /* NC */
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 { /* NC */
+				nvidia,pins = "pu5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 { /* NC */
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv1 { /* NC */
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x1-aud-px1 { /* NC */
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x3-aud-px3 { /* NC */
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 { /* NC */
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 { /* NC */
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc2 { /* NC */
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3-req-pee1 { /* NC */
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap-mclk1-req-pee2 { /* NC */
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output
+			 * driver enabled aka not tristated and input driver
+			 * enabled as well as it features some magic properties
+			 * even though the external loopback is disabled and the
+			 * internal loopback used as per
+			 * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
+			 * bits being set to 0xfffd according to the TRM!
+			 */
+			sdmmc3-clk-lb-out-pee4 { /* NC */
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		clock-frequency = <10000>;
+	};
+
+	/* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			#sound-dai-cells = <0>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vddio>;
+			VDDIO-supply = <&reg_1v8_vddio>;
+			clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+			ams,system-power-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0-1-3-4-5-6 {
+					pins = "gpio0", "gpio1", "gpio3",
+					       "gpio4", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+
+				gpio2-7 {
+					pins = "gpio2", /* PWR_EN_+V3.3 */
+					       "gpio7"; /* +V1.6_LPO */
+					function = "gpio";
+					bias-pull-up;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&reg_module_3v3>;
+				vsup-sd3-supply = <&reg_module_3v3>;
+				vsup-sd4-supply = <&reg_module_3v3>;
+				vsup-sd5-supply = <&reg_module_3v3>;
+				vin-ldo0-supply = <&reg_1v35_vddio_ddr>;
+				vin-ldo1-6-supply = <&reg_module_3v3>;
+				vin-ldo2-5-7-supply = <&reg_1v8_vddio>;
+				vin-ldo3-4-supply = <&reg_module_3v3>;
+				vin-ldo9-10-supply = <&reg_module_3v3>;
+				vin-ldo11-supply = <&reg_module_3v3>;
+
+				reg_vdd_cpu: sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				reg_1v35_vddio_ddr: sd2 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				reg_1v05_vdd: sd4 {
+					regulator-name = "+V1.05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				reg_1v8_vddio: sd5 {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				reg_vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				reg_1v05_avdd: ldo0 {
+					regulator-name = "+V1.05_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				vddio_sdmmc1: ldo1 {
+					regulator-name = "VDDIO_SDMMC1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo2 {
+					regulator-name = "+V1.2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+V1.05_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				/* 1.8V for LVDS, 3.3V for eDP */
+				ldo4 {
+					regulator-name = "AVDD_LVDS0_PLL";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				/* LDO5 not used */
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				/* LDO7 not used */
+
+				ldo9 {
+					regulator-name = "+V3.3_ETH(ldo9)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo10 {
+					regulator-name = "+V3.3_ETH(ldo10)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo11 {
+					regulator-name = "+V1.8_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+
+		/*
+		 * TMP451 temperature sensor
+		 * Note: THERM_N directly connected to AS3722 PMIC THERM
+		 */
+		temp-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
+			#thermal-sensor-cells = <1>;
+			vcc-supply = <&reg_module_3v3>;
+		};
+	};
+
+	/* SPI2: MCU SPI */
+	spi@7000d600 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set power_off bit in ResetControl register of AS3722 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x40>;
+			nvidia,reg-addr = <0x36>;
+			nvidia,reg-data = <0x2>;
+		};
+	};
+
+	sata@70020000 {
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
+		phy-names = "sata-0";
+		avdd-supply = <&reg_1v05_vdd>;
+		hvdd-supply = <&reg_module_3v3>;
+		vddio-supply = <&reg_1v05_vdd>;
+	};
+
+	usb@70090000 {
+		/* USBO1, USBO1 (SS), USBH2, USBH4 and USBH4 (SS) */
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
+		phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
+		avddio-pex-supply = <&reg_1v05_vdd>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+		avdd-usb-ss-pll-supply = <&reg_1v05_vdd>;
+		avdd-usb-supply = <&reg_module_3v3>;
+		dvddio-pex-supply = <&reg_1v05_vdd>;
+		hvdd-usb-ss-pll-e-supply = <&reg_module_3v3>;
+		hvdd-usb-ss-supply = <&reg_module_3v3>;
+	};
+
+	padctl@7009f000 {
+		avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		avdd-pex-pll-supply = <&reg_1v05_vdd>;
+		hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						status = "okay";
+						nvidia,function = "xusb";
+					};
+
+					usb2-1 {
+						status = "okay";
+						nvidia,function = "xusb";
+					};
+
+					usb2-2 {
+						status = "okay";
+						nvidia,function = "xusb";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						status = "okay";
+						nvidia,function = "usb3-ss";
+					};
+
+					pcie-1 {
+						status = "okay";
+						nvidia,function = "usb3-ss";
+					};
+
+					pcie-2 {
+						status = "okay";
+						nvidia,function = "pcie";
+					};
+
+					pcie-3 {
+						status = "okay";
+						nvidia,function = "pcie";
+					};
+
+					pcie-4 {
+						status = "okay";
+						nvidia,function = "pcie";
+					};
+				};
+			};
+
+			sata {
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						status = "okay";
+						nvidia,function = "sata";
+					};
+				};
+			};
+		};
+
+		ports {
+			/* USBO1 */
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+				usb-role-switch;
+				vbus-supply = <&reg_usbo1_vbus>;
+			};
+
+			/* USBH2 */
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			/* USBH4 */
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			usb3-0 {
+				status = "okay";
+				nvidia,usb2-companion = <2>;
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			usb3-1 {
+				status = "okay";
+				nvidia,usb2-companion = <0>;
+				vbus-supply = <&reg_usbo1_vbus>;
+			};
+		};
+	};
+
+	/* eMMC */
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vddio>; /* VCCQ */
+		mmc-ddr-1_8v;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "okay";
+		nvidia,i2c-fs-rate = <400000>;
+		vdd-cpu-supply = <&reg_vdd_cpu>;
+	};
+
+	ahub@70300000 {
+		i2s@70301200 {
+			status = "okay";
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&reg_vdd_cpu>;
+		};
+	};
+
+	clk32k_in: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.05_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_1v05_vdd>;
+	};
+
+	reg_3v3_mxm: regulator-3v3-mxm {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_MXM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_1v05_vdd>;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		/* PWR_EN_+V3.3 */
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3_mxm>;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_tk1",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis TK1";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mem-thermal {
+			trips {
+				mem-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			trips {
+				gpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1-emc.dtsi
new file mode 100644
index 0000000000000..d10e5334a6c67
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1-emc.dtsi
@@ -0,0 +1,2443 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/tegra124-car.h>
+
+/ {
+	clock@60006000 {
+		emc-timings-3 {
+			nvidia,ram-code = <3>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+				nvidia,parent-clock-frequency = <924000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+	};
+
+	memory-controller@70019000 {
+		emc-timings-3 {
+			nvidia,ram-code = <3>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001
+					0x8000000a
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x77e30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001
+					0x80000012
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x76230303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001
+					0x80000017
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x74a30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001
+					0x8000001e
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x74230403
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001
+					0x80000026
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0503
+					0x73c30504
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003
+					0x80000040
+					0x00000001
+					0x00000001
+					0x00000004
+					0x00000002
+					0x00000003
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040203
+					0x000a0504
+					0x73840a05
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000004
+					0x00000004
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000b0607
+					0x77450e08
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000005
+					0x00000006
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000d0709
+					0x7586120a
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007
+					0x80000040
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000007
+					0x00000008
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000006
+					0x06050202
+					0x0010090c
+					0x7428180d
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009
+					0x80000040
+					0x00000003
+					0x00000004
+					0x0000000e
+					0x00000009
+					0x0000000a
+					0x00000001
+					0x00000003
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000007
+					0x07050202
+					0x00130b0e
+					0x73a91b0f
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b
+					0x80000040
+					0x00000004
+					0x00000005
+					0x00000013
+					0x0000000c
+					0x0000000d
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000008
+					0x08060202
+					0x00170e13
+					0x736c2414
+					0x70000f02
+					0x001f0000
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000d
+					0x80000040
+					0x00000005
+					0x00000006
+					0x00000016
+					0x0000000e
+					0x0000000f
+					0x00000002
+					0x00000004
+					0x0000000e
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000009
+					0x09060202
+					0x001a1016
+					0x734e2a17
+					0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+
+	external-memory-controller@7001b000 {
+		emc-timings-3 {
+			nvidia,ram-code = <3>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000005
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000060
+					0x00000000
+					0x00000018
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000007
+					0x0000000f
+					0x00000005
+					0x00000005
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000064
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000e0e
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000007
+					0x00000000
+					0x00000042
+					0x000e000e
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x800001c5
+					0x0000000a
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000
+					0x00000005
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000005
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x0000009a
+					0x00000000
+					0x00000026
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000007
+					0x0000000f
+					0x00000006
+					0x00000006
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x000000a0
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000e0e
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x0000000b
+					0x00000000
+					0x00000042
+					0x000e000e
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x8000023a
+					0x0000000a
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001
+					0x0000000a
+					0x00000000
+					0x00000001
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000005
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000134
+					0x00000000
+					0x0000004d
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000008
+					0x0000000f
+					0x0000000c
+					0x0000000c
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x0000013f
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000e0e
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000015
+					0x00000000
+					0x00000042
+					0x000e000e
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x80000370
+					0x0000000a
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003
+					0x00000011
+					0x00000000
+					0x00000002
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000005
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000202
+					0x00000000
+					0x00000080
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x0000000f
+					0x0000000f
+					0x00000013
+					0x00000013
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000001
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000213
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000e0e
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000022
+					0x00000000
+					0x00000042
+					0x000e000e
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x8000050e
+					0x0000000a
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004
+					0x0000001a
+					0x00000000
+					0x00000003
+					0x00000001
+					0x00000004
+					0x0000000a
+					0x00000005
+					0x0000000b
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000304
+					0x00000000
+					0x000000c1
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000018
+					0x0000000f
+					0x0000001c
+					0x0000001c
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x0000031c
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000e0e
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000033
+					0x00000000
+					0x00000042
+					0x000e000e
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x80000713
+					0x0000000a
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008cd>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009
+					0x00000035
+					0x00000000
+					0x00000006
+					0x00000002
+					0x00000005
+					0x0000000a
+					0x00000005
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000004
+					0x00000006
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000003
+					0x0000000d
+					0x0000000f
+					0x00000011
+					0x00000607
+					0x00000000
+					0x00000181
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000032
+					0x0000000f
+					0x00000038
+					0x00000038
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000006
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000638
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00008000
+					0x00000000
+					0x00000000
+					0x00008000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00090000
+					0x00090000
+					0x00090000
+					0x00090000
+					0x00009000
+					0x00009000
+					0x00009000
+					0x00009000
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000707
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000066
+					0x00000000
+					0x00000100
+					0x000e000e
+					0x00000000
+					0x00000003
+					0x0000d2b3
+					0x80000d22
+					0x0000000a
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0173000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d
+					0x0000004d
+					0x00000000
+					0x00000009
+					0x00000003
+					0x00000004
+					0x00000008
+					0x00000002
+					0x00000009
+					0x00000003
+					0x00000003
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000005
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000007
+					0x00020000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000001
+					0x0000000e
+					0x00000010
+					0x00000012
+					0x000008e4
+					0x00000000
+					0x00000239
+					0x00000001
+					0x00000008
+					0x00000001
+					0x00000000
+					0x0000004b
+					0x0000000e
+					0x00000052
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000008
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000924
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0x002c00a0
+					0x00008000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00098000
+					0x00098000
+					0x00000000
+					0x00098000
+					0x00098000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00050000
+					0x00050000
+					0x00050000
+					0x00050000
+					0x00005000
+					0x00005000
+					0x00005000
+					0x00005000
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000096
+					0x00000000
+					0x00000100
+					0x0173000e
+					0x00000000
+					0x00000003
+					0x000052a3
+					0x800012d7
+					0x00000009
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-mrs-wait-cnt = <0x015b000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000011
+					0x00000066
+					0x00000000
+					0x0000000c
+					0x00000004
+					0x00000004
+					0x00000008
+					0x00000002
+					0x0000000a
+					0x00000004
+					0x00000004
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000005
+					0x00000002
+					0x00000000
+					0x00000001
+					0x00000008
+					0x00020000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000000f
+					0x00000010
+					0x00000012
+					0x00000bd1
+					0x00000000
+					0x000002f4
+					0x00000001
+					0x00000008
+					0x00000001
+					0x00000000
+					0x00000063
+					0x0000000f
+					0x0000006c
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x0000000b
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000c11
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0x002c00a0
+					0x00008000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00070000
+					0x00070000
+					0x00000000
+					0x00070000
+					0x00070000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00038000
+					0x00038000
+					0x00038000
+					0x00038000
+					0x00003800
+					0x00003800
+					0x00003800
+					0x00003800
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x000000c6
+					0x00000000
+					0x00000100
+					0x015b000e
+					0x00000000
+					0x00000003
+					0x000052a3
+					0x8000188b
+					0x00000009
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000941>;
+				nvidia,emc-mrs-wait-cnt = <0x0139000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123133d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000018
+					0x00000088
+					0x00000000
+					0x00000010
+					0x00000006
+					0x00000006
+					0x00000009
+					0x00000002
+					0x0000000d
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000001
+					0x00000009
+					0x00030000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000010
+					0x00000012
+					0x00000014
+					0x00000fd6
+					0x00000000
+					0x000003f5
+					0x00000002
+					0x0000000b
+					0x00000001
+					0x00000000
+					0x00000085
+					0x00000012
+					0x00000090
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000010
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00001017
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0xe01200b1
+					0x00008000
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00054000
+					0x00054000
+					0x00000000
+					0x00054000
+					0x00054000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000000c
+					0x0000000c
+					0x0000000c
+					0x0000000c
+					0x0000000c
+					0x0000000c
+					0x0000000c
+					0x0000000c
+					0x100002a0
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc085
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0606003f
+					0x00000000
+					0x00000000
+					0x00000100
+					0x0139000e
+					0x00000000
+					0x00000003
+					0x000042a0
+					0x80002062
+					0x0000000a
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x0127000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001b
+					0x0000009b
+					0x00000000
+					0x00000013
+					0x00000007
+					0x00000007
+					0x0000000b
+					0x00000003
+					0x00000010
+					0x00000007
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x0000000a
+					0x00000002
+					0x00000000
+					0x00000003
+					0x0000000b
+					0x00070000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000002
+					0x00000012
+					0x00000016
+					0x00000018
+					0x00001208
+					0x00000000
+					0x00000482
+					0x00000002
+					0x0000000d
+					0x00000001
+					0x00000000
+					0x00000097
+					0x00000015
+					0x000000a3
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000013
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00001248
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0xe00e00b1
+					0x00008000
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00048000
+					0x00048000
+					0x00000000
+					0x00048000
+					0x00048000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000000d
+					0x0000000d
+					0x0000000d
+					0x0000000d
+					0x0000000d
+					0x0000000d
+					0x0000000d
+					0x0000000d
+					0x100002a0
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc085
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0606003f
+					0x00000000
+					0x00000000
+					0x00000100
+					0x0127000e
+					0x00000000
+					0x00000003
+					0x000040a0
+					0x800024aa
+					0x0000000e
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x00f7000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000024
+					0x000000cd
+					0x00000000
+					0x00000019
+					0x0000000a
+					0x00000008
+					0x0000000d
+					0x00000004
+					0x00000013
+					0x0000000a
+					0x0000000a
+					0x00000004
+					0x00000002
+					0x00000000
+					0x00000006
+					0x00000006
+					0x0000000b
+					0x00000002
+					0x00000000
+					0x00000002
+					0x0000000d
+					0x00080000
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000001
+					0x00000014
+					0x00000018
+					0x0000001a
+					0x000017e2
+					0x00000000
+					0x000005f8
+					0x00000003
+					0x00000011
+					0x00000001
+					0x00000000
+					0x000000c7
+					0x00000018
+					0x000000d7
+					0x00000200
+					0x00000005
+					0x00000006
+					0x00000005
+					0x00000019
+					0x00000000
+					0x00000008
+					0x00000008
+					0x00001822
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0xe00700b1
+					0x00008000
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00034000
+					0x00034000
+					0x00000000
+					0x00034000
+					0x00034000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x100002a0
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc085
+					0x00000000
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x61861820
+					0x00514514
+					0x00514514
+					0x61861800
+					0x0606003f
+					0x00000000
+					0x00000000
+					0x00000100
+					0x00f7000e
+					0x00000000
+					0x00000004
+					0x00004080
+					0x80003012
+					0x0000000f
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430303>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200020>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000f15>;
+				nvidia,emc-mrs-wait-cnt = <0x00cd000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x0000004c>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000002b
+					0x000000f0
+					0x00000000
+					0x0000001e
+					0x0000000b
+					0x00000009
+					0x0000000f
+					0x00000005
+					0x00000016
+					0x0000000b
+					0x0000000b
+					0x00000004
+					0x00000002
+					0x00000000
+					0x00000007
+					0x00000007
+					0x0000000d
+					0x00000002
+					0x00000000
+					0x00000002
+					0x0000000f
+					0x000a0000
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000001
+					0x00000016
+					0x0000001a
+					0x0000001c
+					0x00001be7
+					0x00000000
+					0x000006f9
+					0x00000004
+					0x00000015
+					0x00000001
+					0x00000000
+					0x000000e7
+					0x0000001b
+					0x000000fb
+					0x00000200
+					0x00000006
+					0x00000007
+					0x00000006
+					0x0000001e
+					0x00000000
+					0x0000000a
+					0x0000000a
+					0x00001c28
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab898
+					0xe00400b1
+					0x00008000
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0002c000
+					0x0002c000
+					0x00000000
+					0x0002c000
+					0x0002c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x100002a0
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc085
+					0x00000000
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x5d75d720
+					0x00514514
+					0x00514514
+					0x5d75d700
+					0x0606003f
+					0x00000000
+					0x00000000
+					0x00000128
+					0x00cd000e
+					0x00000000
+					0x00000004
+					0x00004080
+					0x800037ea
+					0x00000011
+				>;
+			};
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-1200000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-1200000000-1100;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1.dts
new file mode 100644
index 0000000000000..4196f2401c90f
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1.dts
@@ -0,0 +1,2080 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+#include "tegra124-jetson-tk1-emc.dtsi"
+
+/ {
+	model = "NVIDIA Tegra124 Jetson TK1";
+	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
+
+		/* This order keeps the mapping DB9 connector <-> ttyS0 */
+		serial0 = &uartd;
+		serial1 = &uarta;
+		serial2 = &uartb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-supply = <&vdd_3v3_lp0>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+		vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+
+		/* Mini PCIe */
+		pci@1,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+
+		/* Gigabit Ethernet */
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			vdd-supply = <&vdd_3v3_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpu@57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	pinmux: pinmux@70000868 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb1 {
+				nvidia,pins = "pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pc7 {
+				nvidia,pins = "pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg0 {
+				nvidia,pins = "pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg1 {
+				nvidia,pins = "pg1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg2 {
+				nvidia,pins = "pg2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg3 {
+				nvidia,pins = "pg3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 {
+				nvidia,pins = "ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph5 {
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi0 {
+				nvidia,pins = "pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi1 {
+				nvidia,pins = "pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi2 {
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 {
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi7 {
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en1_pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "displaya_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row16_pt0 {
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row17_pt1 {
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cd_n_pv2 {
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_clk_px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vimclk2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "pe";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_req_pee2 {
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_lb_out_pee4 {
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_in_pee5 {
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd_pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en2_pff1 {
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dsi_b {
+				nvidia,pins = "mipi_pad_ctrl_dsi_b";
+				nvidia,function = "dsi_b";
+			};
+		};
+	};
+
+	/*
+	 * First high speed UART, exposed on the expansion connector J3A2
+	 *   Pin 41: BR_UART1_TXD
+	 *   Pin 44: BR_UART1_RXD
+	 */
+	serial@70006000 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+	};
+
+	/*
+	 * Second high speed UART, exposed on the expansion connector J3A2
+	 *   Pin 65: UART2_RXD
+	 *   Pin 68: UART2_TXD
+	 *   Pin 71: UART2_CTS_L
+	 *   Pin 74: UART2_RTS_L
+	 */
+	serial@70006040 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+	};
+
+	/* DB9 serial port */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	/* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		rt5639: audio-codec@1c {
+			compatible = "realtek,rt5639";
+			reg = <0x1c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			realtek,ldo1-en-gpios =
+				<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
+		};
+
+		eeprom@56 {
+			compatible = "atmel,24c02";
+			reg = <0x56>;
+			pagesize = <8>;
+		};
+	};
+
+	/* Expansion GEN2_I2C_* */
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion CAM_I2C_* */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* HDMI DDC */
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion PWR_I2C_*, on-board components */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1_2_4_7 {
+					pins = "gpio1", "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_5_6 {
+					pins = "gpio3", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <2500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				avdd_1v05_run: ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.05V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				ldo4 {
+					regulator-name = "+2.8V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+3.3V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	/* Expansion TS_SPI_* */
+	spi@7000d400 {
+		status = "okay";
+	};
+
+	/* Internal SPI */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		flash@0 {
+			compatible = "winbond,w25q32dw", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x40>;
+			nvidia,reg-addr = <0x36>;
+			nvidia,reg-data = <0x2>;
+		};
+	};
+
+	cec@70015000 {
+		status = "okay";
+	};
+
+	/* Serial ATA */
+	sata@70020000 {
+		status = "okay";
+
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
+		phy-names = "sata-0";
+
+		hvdd-supply = <&vdd_3v3_lp0>;
+		vddio-supply = <&vdd_1v05_run>;
+		avdd-supply = <&vdd_1v05_run>;
+
+		target-5v-supply = <&vdd_5v0_sata>;
+		target-12v-supply = <&vdd_12v0_sata>;
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-usb-supply = <&vdd_3v3_lp0>;
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "snps";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-2 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+
+					pcie-4 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+				};
+			};
+
+			sata {
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						nvidia,function = "sata";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			/* Micro A/B */
+			usb2-0 {
+				status = "okay";
+				mode = "host";
+			};
+
+			/* Mini PCIe */
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+			};
+
+			/* USB3 */
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_usb3_vbus>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	/* SD card */
+	mmc@700b0400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* eMMC */
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "okay";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
+	ahub@70300000 {
+		i2s@70301100 {
+			status = "okay";
+		};
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra124-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+	};
+
+	/* mini-PCIe USB */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+	};
+
+	/* USB A connector */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb3_vbus>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	vdd_mux: regulator-mux {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_MUX";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator-5v0sys {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_sys: regulator-3v3sys {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_run: regulator-3v3run {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_RUN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_hdmi: regulator-3v3hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_run>;
+	};
+
+	vdd_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+USB0_VBUS_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb3_vbus: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_HS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_lp0: regulator-lp0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_LP0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_hdmi_pll: regulator-hdmipll {
+		compatible = "regulator-fixed";
+		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05_run>;
+	};
+
+	vdd_5v0_hdmi: regulator-hdmicon {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Molex power connector */
+	vdd_5v0_sata: regulator-5v0sata {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SATA";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_12v0_sata: regulator-12v0sata {
+		compatible = "regulator-fixed";
+		regulator-name = "+12V_SATA";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_mux>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-jetson-tk1",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "NVIDIA Tegra Jetson TK1";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5639>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mem-thermal {
+			trips {
+				mem-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			trips {
+				gpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan-big-emc.dtsi
new file mode 100644
index 0000000000000..cadb1969f1cce
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-big-emc.dtsi
@@ -0,0 +1,6694 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/tegra124-car.h>
+
+/ {
+	clock@60006000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+
+		emc-timings-4 {
+			nvidia,ram-code = <4>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+
+		emc-timings-6 {
+			nvidia,ram-code = <6>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+	};
+
+	apbmisc@70000800 {
+		nvidia,long-ram-code;
+	};
+
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x76230303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74230403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
+					0x7428180e /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x734c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-4 {
+			nvidia,ram-code = <4>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x77430303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75430403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x74e30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0504 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a40a05 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RC */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090c /* MC_EMEM_ARB_DA_COVERS */
+					0x7488180d /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x74691b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00170e13 /* MC_EMEM_ARB_DA_COVERS */
+					0x746c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-6 {
+			nvidia,ram-code = <6>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x76230303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74230403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
+					0x7428180e /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x734c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+	};
+
+	external-memory-controller@7001b000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 /* EMC_RC */
+					0x00000003 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000060 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000005 /* EMC_TXSR */
+					0x00000005 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000064 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000007 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 /* EMC_RC */
+					0x00000005 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x0000009a /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000006 /* EMC_TXSR */
+					0x00000006 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000a0 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x0000000b /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x8000023a /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x0000000a /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000134 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000c /* EMC_TXSR */
+					0x0000000c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000013f /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000015 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x80000370 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003 /* EMC_RC */
+					0x00000011 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000002 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000202 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000013 /* EMC_TXSR */
+					0x00000013 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000001 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000213 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000022 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x8000050e /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001a /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000304 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000018 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000001c /* EMC_TXSR */
+					0x0000001c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000033 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x0000088d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000035 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000004 /* EMC_EINPUT */
+					0x00000006 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000003 /* EMC_QRST */
+					0x0000000d /* EMC_QSAFE */
+					0x0000000f /* EMC_RDV */
+					0x00000011 /* EMC_RDV_MASK */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000032 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000038 /* EMC_TXSR */
+					0x00000038 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000007 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00090000 /* EMC_DLL_XFORM_DQ0 */
+					0x00090000 /* EMC_DLL_XFORM_DQ1 */
+					0x00094000 /* EMC_DLL_XFORM_DQ2 */
+					0x00094000 /* EMC_DLL_XFORM_DQ3 */
+					0x00009400 /* EMC_DLL_XFORM_DQ4 */
+					0x00009000 /* EMC_DLL_XFORM_DQ5 */
+					0x00009000 /* EMC_DLL_XFORM_DQ6 */
+					0x00009000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000066 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000d2b3 /* EMC_CFG_PIPE */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0174000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d /* EMC_RC */
+					0x0000004c /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000009 /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000005 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x00000007 /* EMC_EINPUT_DURATION */
+					0x00020000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x0000000e /* EMC_QSAFE */
+					0x00000010 /* EMC_RDV */
+					0x00000012 /* EMC_RDV_MASK */
+					0x000008e4 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000004a /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x00000051 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000924 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00030000 /* EMC_DLL_XFORM_DQS0 */
+					0x00030000 /* EMC_DLL_XFORM_DQS1 */
+					0x00030000 /* EMC_DLL_XFORM_DQS2 */
+					0x00030000 /* EMC_DLL_XFORM_DQS3 */
+					0x00030000 /* EMC_DLL_XFORM_DQS4 */
+					0x00030000 /* EMC_DLL_XFORM_DQS5 */
+					0x00030000 /* EMC_DLL_XFORM_DQS6 */
+					0x00030000 /* EMC_DLL_XFORM_DQS7 */
+					0x00030000 /* EMC_DLL_XFORM_DQS8 */
+					0x00030000 /* EMC_DLL_XFORM_DQS9 */
+					0x00030000 /* EMC_DLL_XFORM_DQS10 */
+					0x00030000 /* EMC_DLL_XFORM_DQS11 */
+					0x00030000 /* EMC_DLL_XFORM_DQS12 */
+					0x00030000 /* EMC_DLL_XFORM_DQS13 */
+					0x00030000 /* EMC_DLL_XFORM_DQS14 */
+					0x00030000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00060000 /* EMC_DLL_XFORM_DQ0 */
+					0x00060000 /* EMC_DLL_XFORM_DQ1 */
+					0x00060000 /* EMC_DLL_XFORM_DQ2 */
+					0x00060000 /* EMC_DLL_XFORM_DQ3 */
+					0x00006000 /* EMC_DLL_XFORM_DQ4 */
+					0x00006000 /* EMC_DLL_XFORM_DQ5 */
+					0x00006000 /* EMC_DLL_XFORM_DQ6 */
+					0x00006000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000096 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0174000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000052a3 /* EMC_CFG_PIPE */
+					0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */
+					0x00000009 /* EMC_QPOP */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-mrs-wait-cnt = <0x015b000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000065 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000005 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000001 /* EMC_EINPUT */
+					0x00000008 /* EMC_EINPUT_DURATION */
+					0x00020000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000000 /* EMC_QRST */
+					0x0000000f /* EMC_QSAFE */
+					0x00000010 /* EMC_RDV */
+					0x00000012 /* EMC_RDV_MASK */
+					0x00000bd1 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000063 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000006b /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x0000000d /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c11 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00030000 /* EMC_DLL_XFORM_DQS0 */
+					0x00030000 /* EMC_DLL_XFORM_DQS1 */
+					0x00030000 /* EMC_DLL_XFORM_DQS2 */
+					0x00030000 /* EMC_DLL_XFORM_DQS3 */
+					0x00030000 /* EMC_DLL_XFORM_DQS4 */
+					0x00030000 /* EMC_DLL_XFORM_DQS5 */
+					0x00030000 /* EMC_DLL_XFORM_DQS6 */
+					0x00030000 /* EMC_DLL_XFORM_DQS7 */
+					0x00030000 /* EMC_DLL_XFORM_DQS8 */
+					0x00030000 /* EMC_DLL_XFORM_DQS9 */
+					0x00030000 /* EMC_DLL_XFORM_DQS10 */
+					0x00030000 /* EMC_DLL_XFORM_DQS11 */
+					0x00030000 /* EMC_DLL_XFORM_DQS12 */
+					0x00030000 /* EMC_DLL_XFORM_DQS13 */
+					0x00030000 /* EMC_DLL_XFORM_DQS14 */
+					0x00030000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x00004800 /* EMC_DLL_XFORM_DQ4 */
+					0x00004800 /* EMC_DLL_XFORM_DQ5 */
+					0x00004800 /* EMC_DLL_XFORM_DQ6 */
+					0x00004800 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x000000c6 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x015b000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000052a3 /* EMC_CFG_PIPE */
+					0x8000188b /* EMC_DYN_SELF_REF_CONTROL */
+					0x00000009 /* EMC_QPOP */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000941>;
+				nvidia,emc-mrs-wait-cnt = <0x013a000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123133d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000018 /* EMC_RC */
+					0x00000088 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000011 /* EMC_RAS */
+					0x00000006 /* EMC_RP */
+					0x00000006 /* EMC_R2W */
+					0x00000009 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000d /* EMC_W2P */
+					0x00000006 /* EMC_RD_RCD */
+					0x00000006 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000007 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x00000009 /* EMC_EINPUT_DURATION */
+					0x00040000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x00000010 /* EMC_QSAFE */
+					0x00000013 /* EMC_RDV */
+					0x00000015 /* EMC_RDV_MASK */
+					0x00000fd6 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000b /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000084 /* EMC_AR2PDEN */
+					0x00000012 /* EMC_RW2PDEN */
+					0x0000008f /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000013 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000006 /* EMC_TCLKSTOP */
+					0x00001017 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0xe01200b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQS8 */
+					0x0000000a /* EMC_DLL_XFORM_DQS9 */
+					0x0000000a /* EMC_DLL_XFORM_DQS10 */
+					0x0000000a /* EMC_DLL_XFORM_DQS11 */
+					0x0000000a /* EMC_DLL_XFORM_DQS12 */
+					0x0000000a /* EMC_DLL_XFORM_DQS13 */
+					0x0000000a /* EMC_DLL_XFORM_DQS14 */
+					0x0000000a /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000001 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000001 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x013a000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000042a0 /* EMC_CFG_PIPE */
+					0x80002062 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000b /* EMC_QPOP */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x0128000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001c /* EMC_RC */
+					0x0000009a /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000013 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000007 /* EMC_R2W */
+					0x0000000b /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000010 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_WDV_MASK */
+					0x0000000a /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000003 /* EMC_EINPUT */
+					0x0000000b /* EMC_EINPUT_DURATION */
+					0x00070000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000002 /* EMC_QRST */
+					0x00000012 /* EMC_QSAFE */
+					0x00000016 /* EMC_RDV */
+					0x00000018 /* EMC_RDV_MASK */
+					0x00001208 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000d /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000096 /* EMC_AR2PDEN */
+					0x00000015 /* EMC_RW2PDEN */
+					0x000000a2 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000006 /* EMC_TCLKSTOP */
+					0x00001249 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0xe00e00b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQS8 */
+					0x0000000a /* EMC_DLL_XFORM_DQS9 */
+					0x0000000a /* EMC_DLL_XFORM_DQS10 */
+					0x0000000a /* EMC_DLL_XFORM_DQS11 */
+					0x0000000a /* EMC_DLL_XFORM_DQS12 */
+					0x0000000a /* EMC_DLL_XFORM_DQS13 */
+					0x0000000a /* EMC_DLL_XFORM_DQS14 */
+					0x0000000a /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0128000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000040a0 /* EMC_CFG_PIPE */
+					0x800024aa /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000e /* EMC_QPOP */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0080089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200418>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x00f8000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000cc /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000008 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x0000000b /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x0000000d /* EMC_EINPUT_DURATION */
+					0x00080000 /* EMC_PUTERM_EXTRA */
+					0x00000004 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x00000014 /* EMC_QSAFE */
+					0x00000018 /* EMC_RDV */
+					0x0000001a /* EMC_RDV_MASK */
+					0x000017e2 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000011 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x000000c6 /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000d6 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000006 /* EMC_TCKESR */
+					0x00000005 /* EMC_TPD */
+					0x0000001d /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000008 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001822 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x80000005 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab198 /* EMC_FBIO_CFG5 */
+					0xe00700b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00000005 /* EMC_DLL_XFORM_DQS0 */
+					0x00000005 /* EMC_DLL_XFORM_DQS1 */
+					0x00000005 /* EMC_DLL_XFORM_DQS2 */
+					0x00000005 /* EMC_DLL_XFORM_DQS3 */
+					0x00000005 /* EMC_DLL_XFORM_DQS4 */
+					0x00000005 /* EMC_DLL_XFORM_DQS5 */
+					0x00000005 /* EMC_DLL_XFORM_DQS6 */
+					0x00000005 /* EMC_DLL_XFORM_DQS7 */
+					0x00000005 /* EMC_DLL_XFORM_DQS8 */
+					0x00000005 /* EMC_DLL_XFORM_DQS9 */
+					0x00000005 /* EMC_DLL_XFORM_DQS10 */
+					0x00000005 /* EMC_DLL_XFORM_DQS11 */
+					0x00000005 /* EMC_DLL_XFORM_DQS12 */
+					0x00000005 /* EMC_DLL_XFORM_DQS13 */
+					0x00000005 /* EMC_DLL_XFORM_DQS14 */
+					0x00000005 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000007 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000007 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000a /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x0000000a /* EMC_DLL_XFORM_DQ4 */
+					0x0000000a /* EMC_DLL_XFORM_DQ5 */
+					0x0000000a /* EMC_DLL_XFORM_DQ6 */
+					0x0000000a /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x61861820 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x61861800 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f8000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000007 /* EMC_CTT */
+					0x00000004 /* EMC_CTT_DURATION */
+					0x00004080 /* EMC_CFG_PIPE */
+					0x80003012 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000f /* EMC_QPOP */
+				>;
+			};
+		};
+
+		emc-timings-4 {
+			nvidia,ram-code = <4>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100003>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 /* EMC_RC */
+					0x00000004 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000060 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000005 /* EMC_TXSR */
+					0x00000005 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000064 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x00008000 /* EMC_DLL_XFORM_DQ4 */
+					0x00008000 /* EMC_DLL_XFORM_DQ5 */
+					0x00008000 /* EMC_DLL_XFORM_DQ6 */
+					0x00008000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000007 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000e000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100003>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 /* EMC_RC */
+					0x00000007 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x0000009a /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000008 /* EMC_TXSR */
+					0x00000008 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000a0 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x00008000 /* EMC_DLL_XFORM_DQ4 */
+					0x00008000 /* EMC_DLL_XFORM_DQ5 */
+					0x00008000 /* EMC_DLL_XFORM_DQ6 */
+					0x00008000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x0000000b /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000e000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x8000023a /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100003>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x0000000e /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000134 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000f /* EMC_TXSR */
+					0x0000000f /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000013f /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x00008000 /* EMC_DLL_XFORM_DQ4 */
+					0x00008000 /* EMC_DLL_XFORM_DQ5 */
+					0x00008000 /* EMC_DLL_XFORM_DQ6 */
+					0x00008000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000015 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000e000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x80000370 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100003>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003 /* EMC_RC */
+					0x00000017 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000002 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000202 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000015 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000019 /* EMC_TXSR */
+					0x00000019 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000001 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000213 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x00008000 /* EMC_DLL_XFORM_DQ4 */
+					0x00008000 /* EMC_DLL_XFORM_DQ5 */
+					0x00008000 /* EMC_DLL_XFORM_DQ6 */
+					0x00008000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000022 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000e000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x8000050e /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100003>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x00000023 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000304 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000021 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000025 /* EMC_TXSR */
+					0x00000025 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x00008000 /* EMC_DLL_XFORM_DQ4 */
+					0x00008000 /* EMC_DLL_XFORM_DQ5 */
+					0x00008000 /* EMC_DLL_XFORM_DQ6 */
+					0x00008000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000033 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000e000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x0000088d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100003>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000047 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000006 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000004 /* EMC_EINPUT */
+					0x00000006 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000003 /* EMC_QRST */
+					0x0000000d /* EMC_QSAFE */
+					0x0000000f /* EMC_RDV */
+					0x00000011 /* EMC_RDV_MASK */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000044 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000004a /* EMC_TXSR */
+					0x0000004a /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000007 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00090000 /* EMC_DLL_XFORM_DQ0 */
+					0x00090000 /* EMC_DLL_XFORM_DQ1 */
+					0x00094000 /* EMC_DLL_XFORM_DQ2 */
+					0x00094000 /* EMC_DLL_XFORM_DQ3 */
+					0x00009400 /* EMC_DLL_XFORM_DQ4 */
+					0x00009000 /* EMC_DLL_XFORM_DQ5 */
+					0x00009000 /* EMC_DLL_XFORM_DQ6 */
+					0x00009000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000066 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000e000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000d2b3 /* EMC_CFG_PIPE */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100002>;
+				nvidia,emc-mode-2 = <0x00200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0117000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d /* EMC_RC */
+					0x00000067 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000009 /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000005 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x00000007 /* EMC_EINPUT_DURATION */
+					0x00020000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x0000000e /* EMC_QSAFE */
+					0x00000010 /* EMC_RDV */
+					0x00000012 /* EMC_RDV_MASK */
+					0x000008e4 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000065 /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x0000006c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000924 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00030000 /* EMC_DLL_XFORM_DQS0 */
+					0x00030000 /* EMC_DLL_XFORM_DQS1 */
+					0x00030000 /* EMC_DLL_XFORM_DQS2 */
+					0x00030000 /* EMC_DLL_XFORM_DQS3 */
+					0x00030000 /* EMC_DLL_XFORM_DQS4 */
+					0x00030000 /* EMC_DLL_XFORM_DQS5 */
+					0x00030000 /* EMC_DLL_XFORM_DQS6 */
+					0x00030000 /* EMC_DLL_XFORM_DQS7 */
+					0x00030000 /* EMC_DLL_XFORM_DQS8 */
+					0x00030000 /* EMC_DLL_XFORM_DQS9 */
+					0x00030000 /* EMC_DLL_XFORM_DQS10 */
+					0x00030000 /* EMC_DLL_XFORM_DQS11 */
+					0x00030000 /* EMC_DLL_XFORM_DQS12 */
+					0x00030000 /* EMC_DLL_XFORM_DQS13 */
+					0x00030000 /* EMC_DLL_XFORM_DQS14 */
+					0x00030000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00060000 /* EMC_DLL_XFORM_DQ0 */
+					0x00060000 /* EMC_DLL_XFORM_DQ1 */
+					0x00060000 /* EMC_DLL_XFORM_DQ2 */
+					0x00060000 /* EMC_DLL_XFORM_DQ3 */
+					0x00006000 /* EMC_DLL_XFORM_DQ4 */
+					0x00006000 /* EMC_DLL_XFORM_DQ5 */
+					0x00006000 /* EMC_DLL_XFORM_DQ6 */
+					0x00006000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000096 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0117000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000052a3 /* EMC_CFG_PIPE */
+					0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */
+					0x00000009 /* EMC_QPOP */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100002>;
+				nvidia,emc-mode-2 = <0x00200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00000521>;
+				nvidia,emc-mrs-wait-cnt = <0x00f5000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000011 /* EMC_RC */
+					0x00000089 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000005 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000001 /* EMC_EINPUT */
+					0x00000008 /* EMC_EINPUT_DURATION */
+					0x00020000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000000 /* EMC_QRST */
+					0x0000000f /* EMC_QSAFE */
+					0x00000010 /* EMC_RDV */
+					0x00000012 /* EMC_RDV_MASK */
+					0x00000bd1 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000087 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000008f /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x0000000d /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c11 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00030000 /* EMC_DLL_XFORM_DQS0 */
+					0x00030000 /* EMC_DLL_XFORM_DQS1 */
+					0x00030000 /* EMC_DLL_XFORM_DQS2 */
+					0x00030000 /* EMC_DLL_XFORM_DQS3 */
+					0x00030000 /* EMC_DLL_XFORM_DQS4 */
+					0x00030000 /* EMC_DLL_XFORM_DQS5 */
+					0x00030000 /* EMC_DLL_XFORM_DQS6 */
+					0x00030000 /* EMC_DLL_XFORM_DQS7 */
+					0x00030000 /* EMC_DLL_XFORM_DQS8 */
+					0x00030000 /* EMC_DLL_XFORM_DQS9 */
+					0x00030000 /* EMC_DLL_XFORM_DQS10 */
+					0x00030000 /* EMC_DLL_XFORM_DQS11 */
+					0x00030000 /* EMC_DLL_XFORM_DQS12 */
+					0x00030000 /* EMC_DLL_XFORM_DQS13 */
+					0x00030000 /* EMC_DLL_XFORM_DQS14 */
+					0x00030000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x00004800 /* EMC_DLL_XFORM_DQ4 */
+					0x00004800 /* EMC_DLL_XFORM_DQ5 */
+					0x00004800 /* EMC_DLL_XFORM_DQ6 */
+					0x00004800 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x000000c6 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f5000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000052a3 /* EMC_CFG_PIPE */
+					0x8000188b /* EMC_DYN_SELF_REF_CONTROL */
+					0x00000009 /* EMC_QPOP */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100002>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00000941>;
+				nvidia,emc-mrs-wait-cnt = <0x00c8000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123133d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000018 /* EMC_RC */
+					0x000000b7 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000010 /* EMC_RAS */
+					0x00000006 /* EMC_RP */
+					0x00000006 /* EMC_R2W */
+					0x00000009 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000d /* EMC_W2P */
+					0x00000006 /* EMC_RD_RCD */
+					0x00000006 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000007 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x00000009 /* EMC_EINPUT_DURATION */
+					0x00040000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x00000010 /* EMC_QSAFE */
+					0x00000013 /* EMC_RDV */
+					0x00000015 /* EMC_RDV_MASK */
+					0x00000fd6 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000b /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x000000b4 /* EMC_AR2PDEN */
+					0x00000012 /* EMC_RW2PDEN */
+					0x000000bf /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000013 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000006 /* EMC_TCLKSTOP */
+					0x00001017 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0xe01200b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQS8 */
+					0x0000000a /* EMC_DLL_XFORM_DQS9 */
+					0x0000000a /* EMC_DLL_XFORM_DQS10 */
+					0x0000000a /* EMC_DLL_XFORM_DQS11 */
+					0x0000000a /* EMC_DLL_XFORM_DQS12 */
+					0x0000000a /* EMC_DLL_XFORM_DQS13 */
+					0x0000000a /* EMC_DLL_XFORM_DQS14 */
+					0x0000000a /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000001 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000001 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00c8000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000042a0 /* EMC_CFG_PIPE */
+					0x80002062 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000b /* EMC_QPOP */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100002>;
+				nvidia,emc-mode-2 = <0x00200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x00b0000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001b /* EMC_RC */
+					0x000000d0 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000013 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000007 /* EMC_R2W */
+					0x0000000b /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000010 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_WDV_MASK */
+					0x0000000a /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000003 /* EMC_EINPUT */
+					0x0000000b /* EMC_EINPUT_DURATION */
+					0x00070000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000002 /* EMC_QRST */
+					0x00000012 /* EMC_QSAFE */
+					0x00000016 /* EMC_RDV */
+					0x00000018 /* EMC_RDV_MASK */
+					0x00001208 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000d /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x000000cc /* EMC_AR2PDEN */
+					0x00000015 /* EMC_RW2PDEN */
+					0x000000d8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000006 /* EMC_TCLKSTOP */
+					0x00001249 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0xe00e00b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQS8 */
+					0x0000000a /* EMC_DLL_XFORM_DQS9 */
+					0x0000000a /* EMC_DLL_XFORM_DQS10 */
+					0x0000000a /* EMC_DLL_XFORM_DQS11 */
+					0x0000000a /* EMC_DLL_XFORM_DQS12 */
+					0x0000000a /* EMC_DLL_XFORM_DQS13 */
+					0x0000000a /* EMC_DLL_XFORM_DQS14 */
+					0x0000000a /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00b0000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000040a0 /* EMC_CFG_PIPE */
+					0x800024aa /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000e /* EMC_QPOP */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0080089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100002>;
+				nvidia,emc-mode-2 = <0x00200418>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x006f000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000024 /* EMC_RC */
+					0x00000114 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000019 /* EMC_RAS */
+					0x0000000a /* EMC_RP */
+					0x00000008 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x0000000a /* EMC_RD_RCD */
+					0x0000000a /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x0000000b /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x0000000d /* EMC_EINPUT_DURATION */
+					0x00080000 /* EMC_PUTERM_EXTRA */
+					0x00000004 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x00000014 /* EMC_QSAFE */
+					0x00000018 /* EMC_RDV */
+					0x0000001a /* EMC_RDV_MASK */
+					0x000017e2 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000011 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000010d /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x0000011e /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000006 /* EMC_TCKESR */
+					0x00000005 /* EMC_TPD */
+					0x0000001d /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000008 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001822 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x80000005 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab198 /* EMC_FBIO_CFG5 */
+					0xe00700b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x007fc007 /* EMC_DLL_XFORM_DQS0 */
+					0x007fc008 /* EMC_DLL_XFORM_DQS1 */
+					0x007f400c /* EMC_DLL_XFORM_DQS2 */
+					0x007fc007 /* EMC_DLL_XFORM_DQS3 */
+					0x007f4006 /* EMC_DLL_XFORM_DQS4 */
+					0x007f8004 /* EMC_DLL_XFORM_DQS5 */
+					0x007f8005 /* EMC_DLL_XFORM_DQS6 */
+					0x007f8004 /* EMC_DLL_XFORM_DQS7 */
+					0x007fc007 /* EMC_DLL_XFORM_DQS8 */
+					0x007fc008 /* EMC_DLL_XFORM_DQS9 */
+					0x007f400c /* EMC_DLL_XFORM_DQS10 */
+					0x007fc007 /* EMC_DLL_XFORM_DQS11 */
+					0x007f4006 /* EMC_DLL_XFORM_DQS12 */
+					0x007f8004 /* EMC_DLL_XFORM_DQS13 */
+					0x007f8005 /* EMC_DLL_XFORM_DQS14 */
+					0x007f8004 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000007 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000007 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x61861820 /* EMC_XM2DQSPADCTRL3 */
+					0x00492492 /* EMC_XM2DQSPADCTRL4 */
+					0x00492492 /* EMC_XM2DQSPADCTRL5 */
+					0x61861800 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x006f000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000007 /* EMC_CTT */
+					0x00000004 /* EMC_CTT_DURATION */
+					0x00004080 /* EMC_CFG_PIPE */
+					0x80003012 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000f /* EMC_QPOP */
+				>;
+			};
+		};
+
+		emc-timings-6 {
+			nvidia,ram-code = <6>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 /* EMC_RC */
+					0x00000003 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000060 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000005 /* EMC_TXSR */
+					0x00000005 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000064 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000007 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 /* EMC_RC */
+					0x00000005 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x0000009a /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000006 /* EMC_TXSR */
+					0x00000006 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000a0 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x0000000b /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x8000023a /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x0000000a /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000134 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000c /* EMC_TXSR */
+					0x0000000c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000013f /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000015 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x80000370 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003 /* EMC_RC */
+					0x00000011 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000002 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000202 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000013 /* EMC_TXSR */
+					0x00000013 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000001 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000213 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000022 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x8000050e /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001a /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000304 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000018 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000001c /* EMC_TXSR */
+					0x0000001c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000033 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x0000088d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000035 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000004 /* EMC_EINPUT */
+					0x00000006 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000003 /* EMC_QRST */
+					0x0000000d /* EMC_QSAFE */
+					0x0000000f /* EMC_RDV */
+					0x00000011 /* EMC_RDV_MASK */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000032 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000038 /* EMC_TXSR */
+					0x00000038 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000007 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00090000 /* EMC_DLL_XFORM_DQ0 */
+					0x00090000 /* EMC_DLL_XFORM_DQ1 */
+					0x00094000 /* EMC_DLL_XFORM_DQ2 */
+					0x00094000 /* EMC_DLL_XFORM_DQ3 */
+					0x00009400 /* EMC_DLL_XFORM_DQ4 */
+					0x00009000 /* EMC_DLL_XFORM_DQ5 */
+					0x00009000 /* EMC_DLL_XFORM_DQ6 */
+					0x00009000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000066 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000d2b3 /* EMC_CFG_PIPE */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0174000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d /* EMC_RC */
+					0x0000004c /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000009 /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000005 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x00000007 /* EMC_EINPUT_DURATION */
+					0x00020000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x0000000e /* EMC_QSAFE */
+					0x00000010 /* EMC_RDV */
+					0x00000012 /* EMC_RDV_MASK */
+					0x000008e4 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000004a /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x00000051 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000924 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00030000 /* EMC_DLL_XFORM_DQS0 */
+					0x00030000 /* EMC_DLL_XFORM_DQS1 */
+					0x00030000 /* EMC_DLL_XFORM_DQS2 */
+					0x00030000 /* EMC_DLL_XFORM_DQS3 */
+					0x00030000 /* EMC_DLL_XFORM_DQS4 */
+					0x00030000 /* EMC_DLL_XFORM_DQS5 */
+					0x00030000 /* EMC_DLL_XFORM_DQS6 */
+					0x00030000 /* EMC_DLL_XFORM_DQS7 */
+					0x00030000 /* EMC_DLL_XFORM_DQS8 */
+					0x00030000 /* EMC_DLL_XFORM_DQS9 */
+					0x00030000 /* EMC_DLL_XFORM_DQS10 */
+					0x00030000 /* EMC_DLL_XFORM_DQS11 */
+					0x00030000 /* EMC_DLL_XFORM_DQS12 */
+					0x00030000 /* EMC_DLL_XFORM_DQS13 */
+					0x00030000 /* EMC_DLL_XFORM_DQS14 */
+					0x00030000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00060000 /* EMC_DLL_XFORM_DQ0 */
+					0x00060000 /* EMC_DLL_XFORM_DQ1 */
+					0x00060000 /* EMC_DLL_XFORM_DQ2 */
+					0x00060000 /* EMC_DLL_XFORM_DQ3 */
+					0x00006000 /* EMC_DLL_XFORM_DQ4 */
+					0x00006000 /* EMC_DLL_XFORM_DQ5 */
+					0x00006000 /* EMC_DLL_XFORM_DQ6 */
+					0x00006000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000096 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0174000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000052a3 /* EMC_CFG_PIPE */
+					0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */
+					0x00000009 /* EMC_QPOP */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-mrs-wait-cnt = <0x015b000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000065 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000005 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000001 /* EMC_EINPUT */
+					0x00000008 /* EMC_EINPUT_DURATION */
+					0x00020000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000000 /* EMC_QRST */
+					0x0000000f /* EMC_QSAFE */
+					0x00000010 /* EMC_RDV */
+					0x00000012 /* EMC_RDV_MASK */
+					0x00000bd1 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000063 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000006b /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x0000000d /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c11 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00030000 /* EMC_DLL_XFORM_DQS0 */
+					0x00030000 /* EMC_DLL_XFORM_DQS1 */
+					0x00030000 /* EMC_DLL_XFORM_DQS2 */
+					0x00030000 /* EMC_DLL_XFORM_DQS3 */
+					0x00030000 /* EMC_DLL_XFORM_DQS4 */
+					0x00030000 /* EMC_DLL_XFORM_DQS5 */
+					0x00030000 /* EMC_DLL_XFORM_DQS6 */
+					0x00030000 /* EMC_DLL_XFORM_DQS7 */
+					0x00030000 /* EMC_DLL_XFORM_DQS8 */
+					0x00030000 /* EMC_DLL_XFORM_DQS9 */
+					0x00030000 /* EMC_DLL_XFORM_DQS10 */
+					0x00030000 /* EMC_DLL_XFORM_DQS11 */
+					0x00030000 /* EMC_DLL_XFORM_DQS12 */
+					0x00030000 /* EMC_DLL_XFORM_DQS13 */
+					0x00030000 /* EMC_DLL_XFORM_DQS14 */
+					0x00030000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x00004800 /* EMC_DLL_XFORM_DQ4 */
+					0x00004800 /* EMC_DLL_XFORM_DQ5 */
+					0x00004800 /* EMC_DLL_XFORM_DQ6 */
+					0x00004800 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x000000c6 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x015b000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000052a3 /* EMC_CFG_PIPE */
+					0x8000188b /* EMC_DYN_SELF_REF_CONTROL */
+					0x00000009 /* EMC_QPOP */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000941>;
+				nvidia,emc-mrs-wait-cnt = <0x013a000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123133d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000018 /* EMC_RC */
+					0x00000088 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000011 /* EMC_RAS */
+					0x00000006 /* EMC_RP */
+					0x00000006 /* EMC_R2W */
+					0x00000009 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000d /* EMC_W2P */
+					0x00000006 /* EMC_RD_RCD */
+					0x00000006 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000007 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x00000009 /* EMC_EINPUT_DURATION */
+					0x00040000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x00000010 /* EMC_QSAFE */
+					0x00000013 /* EMC_RDV */
+					0x00000015 /* EMC_RDV_MASK */
+					0x00000fd6 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000b /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000084 /* EMC_AR2PDEN */
+					0x00000012 /* EMC_RW2PDEN */
+					0x0000008f /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000013 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000006 /* EMC_TCLKSTOP */
+					0x00001017 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0xe01200b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQS8 */
+					0x0000000a /* EMC_DLL_XFORM_DQS9 */
+					0x0000000a /* EMC_DLL_XFORM_DQS10 */
+					0x0000000a /* EMC_DLL_XFORM_DQS11 */
+					0x0000000a /* EMC_DLL_XFORM_DQS12 */
+					0x0000000a /* EMC_DLL_XFORM_DQS13 */
+					0x0000000a /* EMC_DLL_XFORM_DQS14 */
+					0x0000000a /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000001 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000001 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x013a000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000042a0 /* EMC_CFG_PIPE */
+					0x80002062 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000b /* EMC_QPOP */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x0128000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001c /* EMC_RC */
+					0x0000009a /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000013 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000007 /* EMC_R2W */
+					0x0000000b /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000010 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_WDV_MASK */
+					0x0000000a /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000003 /* EMC_EINPUT */
+					0x0000000b /* EMC_EINPUT_DURATION */
+					0x00070000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000002 /* EMC_QRST */
+					0x00000012 /* EMC_QSAFE */
+					0x00000016 /* EMC_RDV */
+					0x00000018 /* EMC_RDV_MASK */
+					0x00001208 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000d /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000096 /* EMC_AR2PDEN */
+					0x00000015 /* EMC_RW2PDEN */
+					0x000000a2 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000006 /* EMC_TCLKSTOP */
+					0x00001249 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0xe00e00b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQS8 */
+					0x0000000a /* EMC_DLL_XFORM_DQS9 */
+					0x0000000a /* EMC_DLL_XFORM_DQS10 */
+					0x0000000a /* EMC_DLL_XFORM_DQS11 */
+					0x0000000a /* EMC_DLL_XFORM_DQS12 */
+					0x0000000a /* EMC_DLL_XFORM_DQS13 */
+					0x0000000a /* EMC_DLL_XFORM_DQS14 */
+					0x0000000a /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0128000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000040a0 /* EMC_CFG_PIPE */
+					0x800024aa /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000e /* EMC_QPOP */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0080089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200418>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x00f8000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000cc /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000008 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000004 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x0000000b /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x0000000d /* EMC_EINPUT_DURATION */
+					0x00080000 /* EMC_PUTERM_EXTRA */
+					0x00000004 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x00000014 /* EMC_QSAFE */
+					0x00000018 /* EMC_RDV */
+					0x0000001a /* EMC_RDV_MASK */
+					0x000017e2 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000011 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x000000c6 /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000d6 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000006 /* EMC_TCKESR */
+					0x00000005 /* EMC_TPD */
+					0x0000001d /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000008 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001822 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x80000005 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab198 /* EMC_FBIO_CFG5 */
+					0xe00700b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00000009 /* EMC_DLL_XFORM_DQS0 */
+					0x00000009 /* EMC_DLL_XFORM_DQS1 */
+					0x00000009 /* EMC_DLL_XFORM_DQS2 */
+					0x00000007 /* EMC_DLL_XFORM_DQS3 */
+					0x00000006 /* EMC_DLL_XFORM_DQS4 */
+					0x00000006 /* EMC_DLL_XFORM_DQS5 */
+					0x007fc009 /* EMC_DLL_XFORM_DQS6 */
+					0x00000006 /* EMC_DLL_XFORM_DQS7 */
+					0x00000009 /* EMC_DLL_XFORM_DQS8 */
+					0x00000009 /* EMC_DLL_XFORM_DQS9 */
+					0x00000009 /* EMC_DLL_XFORM_DQS10 */
+					0x00000007 /* EMC_DLL_XFORM_DQS11 */
+					0x00000006 /* EMC_DLL_XFORM_DQS12 */
+					0x00000007 /* EMC_DLL_XFORM_DQS13 */
+					0x00000009 /* EMC_DLL_XFORM_DQS14 */
+					0x00000007 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00034002 /* EMC_DLL_XFORM_ADDR0 */
+					0x00034002 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00034002 /* EMC_DLL_XFORM_ADDR3 */
+					0x00034002 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000007 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000007 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x61861820 /* EMC_XM2DQSPADCTRL3 */
+					0x004d34d3 /* EMC_XM2DQSPADCTRL4 */
+					0x004d34d3 /* EMC_XM2DQSPADCTRL5 */
+					0x61861800 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f8000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000007 /* EMC_CTT */
+					0x00000004 /* EMC_CTT_DURATION */
+					0x00004080 /* EMC_CFG_PIPE */
+					0x80003012 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000f /* EMC_QPOP */
+				>;
+			};
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-924000000;
+		/delete-node/ opp-1200000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-924000000-1100;
+		/delete-node/ opp-1200000000-1100;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-nyan-big-fhd.dts b/arch/arm/boot/dts/nvidia/tegra124-nyan-big-fhd.dts
new file mode 100644
index 0000000000000..4db43324dafa7
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-big-fhd.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra124-nyan-big.dts"
+
+/ {
+	/* Version of Nyan Big with 1080p panel */
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133htn01";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-nyan-big.dts b/arch/arm/boot/dts/nvidia/tegra124-nyan-big.dts
new file mode 100644
index 0000000000000..8bca9599ad6ec
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-big.dts
@@ -0,0 +1,1348 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra124-nyan.dtsi"
+
+#include "tegra124-nyan-big-emc.dtsi"
+
+/ {
+	model = "Acer Chromebook 13 CB5-311";
+	compatible = "google,nyan-big-rev7", "google,nyan-big-rev6",
+		     "google,nyan-big-rev5", "google,nyan-big-rev4",
+		     "google,nyan-big-rev3", "google,nyan-big-rev2",
+		     "google,nyan-big-rev1", "google,nyan-big-rev0",
+		     "google,nyan-big", "google,nyan", "nvidia,tegra124";
+
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133xtn01";
+					power-supply = <&vdd_3v3_panel>;
+					backlight = <&backlight>;
+				};
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_default>;
+
+		pinmux_default: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pb1 {
+				nvidia,pins = "pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pc7 {
+				nvidia,pins = "pc7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg0 {
+				nvidia,pins = "pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg1 {
+				nvidia,pins = "pg1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg2 {
+				nvidia,pins = "pg2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg3 {
+				nvidia,pins = "pg3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 {
+				nvidia,pins = "ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph5 {
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 {
+				nvidia,pins = "pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi1 {
+				nvidia,pins = "pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi2 {
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 {
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi7 {
+				nvidia,pins = "pi7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row16_pt0 {
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row17_pt1 {
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cd_n_pv2 {
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_clk_px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_req_pee2 {
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_out_pee4 {
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_lb_in_pee5 {
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd_pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en2_pff1 {
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	mmc@700b0400 { /* SD Card on this bus */
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-nyan-big",
+			     "nvidia,tegra-audio-max98090-nyan",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "GoogleNyanBig";
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze-emc.dtsi
new file mode 100644
index 0000000000000..e8dcc4f51fc59
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze-emc.dtsi
@@ -0,0 +1,2071 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/tegra124-car.h>
+
+/ {
+	clock@60006000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+
+			/* TODO: Add 528MHz frequency */
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+	};
+
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001
+					0x8000000a
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x77e30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001
+					0x80000012
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x76230303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001
+					0x80000017
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x74a30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001
+					0x8000001e
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x74230403
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001
+					0x80000026
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0403
+					0x73c30504
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003
+					0x80000040
+					0x00000001
+					0x00000001
+					0x00000005
+					0x00000002
+					0x00000004
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040203
+					0x000a0405
+					0x73840a06
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000004
+					0x00000005
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000b0607
+					0x77450e08
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000005
+					0x00000007
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000d0709
+					0x7586120a
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007
+					0x80000040
+					0x00000002
+					0x00000003
+					0x0000000d
+					0x00000008
+					0x0000000a
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000006
+					0x06050202
+					0x0010090d
+					0x7428180e
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009
+					0x80000040
+					0x00000003
+					0x00000004
+					0x0000000e
+					0x00000009
+					0x0000000b
+					0x00000001
+					0x00000003
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000007
+					0x07050202
+					0x00130b0e
+					0x73a91b0f
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b
+					0x80000040
+					0x00000004
+					0x00000005
+					0x00000013
+					0x0000000c
+					0x0000000f
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000008
+					0x08060202
+					0x00160d13
+					0x734c2414
+					0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+
+	external-memory-controller@7001b000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000003
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000060
+					0x00000000
+					0x00000018
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000007
+					0x0000000f
+					0x00000005
+					0x00000005
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000064
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000007
+					0x00000000
+					0x00000042
+					0x000c000c
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x800001c5
+					0x0000000a
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000
+					0x00000005
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000003
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x0000009a
+					0x00000000
+					0x00000026
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000007
+					0x0000000f
+					0x00000006
+					0x00000006
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x000000a0
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x0000000b
+					0x00000000
+					0x00000042
+					0x000c000c
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x8000023a
+					0x0000000a
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001
+					0x0000000a
+					0x00000000
+					0x00000001
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000003
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000134
+					0x00000000
+					0x0000004d
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000008
+					0x0000000f
+					0x0000000c
+					0x0000000c
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x0000013f
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000015
+					0x00000000
+					0x00000042
+					0x000c000c
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x80000370
+					0x0000000a
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003
+					0x00000011
+					0x00000000
+					0x00000002
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000003
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000202
+					0x00000000
+					0x00000080
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x0000000f
+					0x0000000f
+					0x00000013
+					0x00000013
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000001
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000213
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000022
+					0x00000000
+					0x00000042
+					0x000c000c
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x8000050e
+					0x0000000a
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004
+					0x0000001a
+					0x00000000
+					0x00000003
+					0x00000001
+					0x00000004
+					0x0000000a
+					0x00000003
+					0x0000000b
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000304
+					0x00000000
+					0x000000c1
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000018
+					0x0000000f
+					0x0000001c
+					0x0000001c
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000003
+					0x00000000
+					0x00000005
+					0x00000005
+					0x0000031c
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000033
+					0x00000000
+					0x00000042
+					0x000c000c
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x80000713
+					0x0000000a
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x0000088d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009
+					0x00000035
+					0x00000000
+					0x00000007
+					0x00000002
+					0x00000005
+					0x0000000a
+					0x00000003
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000004
+					0x00000006
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000003
+					0x0000000d
+					0x0000000f
+					0x00000011
+					0x00000607
+					0x00000000
+					0x00000181
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000032
+					0x0000000f
+					0x00000038
+					0x00000038
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000007
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000638
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00090000
+					0x00090000
+					0x00090000
+					0x00090000
+					0x00009000
+					0x00009000
+					0x00009000
+					0x00009000
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000066
+					0x00000000
+					0x00000100
+					0x000c000c
+					0x00000000
+					0x00000003
+					0x0000d2b3
+					0x80000d22
+					0x0000000a
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0174000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d
+					0x0000004c
+					0x00000000
+					0x00000009
+					0x00000003
+					0x00000004
+					0x00000008
+					0x00000002
+					0x00000009
+					0x00000003
+					0x00000003
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000005
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000007
+					0x00020000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000001
+					0x0000000e
+					0x00000010
+					0x00000012
+					0x000008e4
+					0x00000000
+					0x00000239
+					0x00000001
+					0x00000008
+					0x00000001
+					0x00000000
+					0x0000004a
+					0x0000000e
+					0x00000051
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000009
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000924
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0x002c00a0
+					0x00008000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00090000
+					0x00090000
+					0x00000000
+					0x00090000
+					0x00090000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00060000
+					0x00060000
+					0x00060000
+					0x00060000
+					0x00006000
+					0x00006000
+					0x00006000
+					0x00006000
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000202
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000096
+					0x00000000
+					0x00000100
+					0x0174000c
+					0x00000000
+					0x00000003
+					0x000052a3
+					0x800012d7
+					0x00000009
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-mrs-wait-cnt = <0x015b000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000012
+					0x00000065
+					0x00000000
+					0x0000000c
+					0x00000004
+					0x00000005
+					0x00000008
+					0x00000002
+					0x0000000a
+					0x00000004
+					0x00000004
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000005
+					0x00000002
+					0x00000000
+					0x00000001
+					0x00000008
+					0x00020000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000000f
+					0x00000010
+					0x00000012
+					0x00000bd1
+					0x00000000
+					0x000002f4
+					0x00000001
+					0x00000008
+					0x00000001
+					0x00000000
+					0x00000063
+					0x0000000f
+					0x0000006b
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x0000000d
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000c11
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0x002c00a0
+					0x00008000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00068000
+					0x00068000
+					0x00000000
+					0x00068000
+					0x00068000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00058000
+					0x00058000
+					0x00058000
+					0x00058000
+					0x00005800
+					0x00005800
+					0x00005800
+					0x00005800
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000202
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x000000c6
+					0x00000000
+					0x00000100
+					0x015b000c
+					0x00000000
+					0x00000003
+					0x000052a3
+					0x8000188b
+					0x00000009
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x0128000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001c
+					0x0000009a
+					0x00000000
+					0x00000013
+					0x00000007
+					0x00000007
+					0x0000000b
+					0x00000003
+					0x00000010
+					0x00000007
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x0000000a
+					0x00000002
+					0x00000000
+					0x00000003
+					0x0000000b
+					0x00070000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000002
+					0x00000012
+					0x00000016
+					0x00000018
+					0x00001208
+					0x00000000
+					0x00000482
+					0x00000002
+					0x0000000d
+					0x00000001
+					0x00000000
+					0x00000096
+					0x00000015
+					0x000000a2
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000015
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00001248
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0xe00e00b1
+					0x00008000
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00040000
+					0x00040000
+					0x00000000
+					0x00040000
+					0x00040000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x00000004
+					0x00000001
+					0x00000005
+					0x00000007
+					0x00000004
+					0x00000006
+					0x00000007
+					0x00000004
+					0x00000004
+					0x00000001
+					0x00000005
+					0x00000007
+					0x00000004
+					0x00000006
+					0x00000007
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x100002a0
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc085
+					0x00000202
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0606003f
+					0x00000000
+					0x00000000
+					0x00000100
+					0x0128000c
+					0x00000000
+					0x00000003
+					0x000040a0
+					0x800024a9
+					0x0000000e
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x00f8000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000025
+					0x000000cc
+					0x00000000
+					0x0000001a
+					0x00000009
+					0x00000008
+					0x0000000d
+					0x00000004
+					0x00000013
+					0x00000009
+					0x00000009
+					0x00000003
+					0x00000002
+					0x00000000
+					0x00000006
+					0x00000006
+					0x0000000b
+					0x00000002
+					0x00000000
+					0x00000002
+					0x0000000d
+					0x00080000
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000001
+					0x00000014
+					0x00000018
+					0x0000001a
+					0x000017e2
+					0x00000000
+					0x000005f8
+					0x00000003
+					0x00000011
+					0x00000001
+					0x00000000
+					0x000000c6
+					0x00000018
+					0x000000d6
+					0x00000200
+					0x00000005
+					0x00000006
+					0x00000005
+					0x0000001d
+					0x00000000
+					0x00000008
+					0x00000008
+					0x00001822
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0xe00700b1
+					0x00008000
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0002c000
+					0x0002c000
+					0x00000000
+					0x0002c000
+					0x0002c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000008
+					0x00000008
+					0x00000005
+					0x00000008
+					0x0000000a
+					0x00000008
+					0x0000000a
+					0x0000000a
+					0x00000008
+					0x00000008
+					0x00000005
+					0x00000008
+					0x0000000a
+					0x00000008
+					0x0000000a
+					0x0000000a
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x100002a0
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc085
+					0x00000202
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x61861820
+					0x00492492
+					0x00492492
+					0x61861800
+					0x0606003f
+					0x00000000
+					0x00000000
+					0x00000100
+					0x00f8000c
+					0x00000000
+					0x00000004
+					0x00004080
+					0x80003012
+					0x0000000f
+				>;
+			};
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-924000000;
+		/delete-node/ opp-1200000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-924000000-1100;
+		/delete-node/ opp-1200000000-1100;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze.dts
new file mode 100644
index 0000000000000..432540c100653
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze.dts
@@ -0,0 +1,1346 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra124-nyan.dtsi"
+
+#include "tegra124-nyan-blaze-emc.dtsi"
+
+/ {
+	model = "HP Chromebook 14";
+	compatible = "google,nyan-blaze-rev10", "google,nyan-blaze-rev9",
+		     "google,nyan-blaze-rev8", "google,nyan-blaze-rev7",
+		     "google,nyan-blaze-rev6", "google,nyan-blaze-rev5",
+		     "google,nyan-blaze-rev4", "google,nyan-blaze-rev3",
+		     "google,nyan-blaze-rev2", "google,nyan-blaze-rev1",
+		     "google,nyan-blaze-rev0", "google,nyan-blaze",
+		     "google,nyan", "nvidia,tegra124";
+
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "samsung,ltn140at29-301";
+					power-supply = <&vdd_3v3_panel>;
+					backlight = <&backlight>;
+				};
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_default>;
+
+		pinmux_default: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pb1 {
+				nvidia,pins = "pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pc7 {
+				nvidia,pins = "pc7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg0 {
+				nvidia,pins = "pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg1 {
+				nvidia,pins = "pg1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg2 {
+				nvidia,pins = "pg2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg3 {
+				nvidia,pins = "pg3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 {
+				nvidia,pins = "ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph5 {
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 {
+				nvidia,pins = "pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi1 {
+				nvidia,pins = "pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi2 {
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 {
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi7 {
+				nvidia,pins = "pi7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en1_pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row16_pt0 {
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row17_pt1 {
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cd_n_pv2 {
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_clk_px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_req_pee2 {
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_out_pee4 {
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_lb_in_pee5 {
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd_pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en2_pff1 {
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-nyan-blaze",
+			     "nvidia,tegra-audio-max98090-nyan",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "GoogleNyanBlaze";
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
new file mode 100644
index 0000000000000..0c35ca2e91219
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
@@ -0,0 +1,836 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "tegra124.dtsi"
+
+/ {
+	aliases {
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/*
+	 * Note that recent version of the device tree compiler (starting with
+	 * version 1.4.2) warn about this node containing a reg property, but
+	 * missing a unit-address. However, the bootloader on these Chromebook
+	 * devices relies on the full name of this node to be exactly /memory.
+	 * Adding the unit-address causes the bootloader to create a /memory
+	 * node and write the memory bank configuration to that node, which in
+	 * turn leads the kernel to believe that the device has 2 GiB of
+	 * memory instead of the amount detected by the bootloader.
+	 *
+	 * The name of this node is effectively ABI and must not be changed.
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	/delete-node/ memory@80000000;
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_3v3_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			hdmi-supply = <&vdd_5v0_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		sor@54540000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
+			vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>;
+
+			nvidia,dpaux = <&dpaux>;
+			nvidia,panel = <&panel>;
+		};
+
+		dpaux@545c0000 {
+			vdd-supply = <&vdd_3v3_panel>;
+			status = "okay";
+		};
+	};
+
+	gpu@57000000 {
+		status = "okay";
+
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	serial@70006000 {
+		/* Debug connector on the bottom of the board near SD card. */
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		acodec: audio-codec@10 {
+			compatible = "maxim,max98090";
+			reg = <0x10>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+		};
+
+		tmp451: temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		trackpad@15 {
+			compatible = "elan,ekth3000";
+			reg = <0x15>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		tpm@20 {
+			compatible = "infineon,slb9645tt";
+			reg = <0x20>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio2_4_7 {
+					pins = "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_6 {
+					pins = "gpio3", "gpio6";
+					bias-high-impedance;
+				};
+
+				gpio5 {
+					pins = "gpio5";
+					function = "clk32k-out";
+					bias-pull-down;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				avdd_1v05_run: ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.00V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				vdd_run_cam: ldo4 {
+					regulator-name = "+3.3V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.8V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	spi@7000d400 {
+		status = "okay";
+
+		cros_ec: cros-ec@0 {
+			compatible = "google,cros-ec-spi";
+			spi-max-frequency = <3000000>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+			reg = <0>;
+
+			google,cros-ec-spi-msg-delay = <2000>;
+
+			i2c-tunnel {
+				compatible = "google,cros-ec-i2c-tunnel";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				google,remote-bus = <0>;
+
+				charger: bq24735@9 {
+					compatible = "ti,bq24735";
+					reg = <0x9>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(J, 0)
+							IRQ_TYPE_EDGE_BOTH>;
+					ti,ac-detect-gpios = <&gpio
+							TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+					ti,external-control;
+				};
+
+				battery: sbs-battery@b {
+					compatible = "sbs,sbs-battery";
+					reg = <0xb>;
+					sbs,i2c-retry-count = <2>;
+					sbs,poll-retry-count = <10>;
+					power-supplies = <&charger>;
+				};
+			};
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		flash@0 {
+			compatible = "winbond,w25q32dw", "jedec,spi-nor";
+			spi-max-frequency = <25000000>;
+			reg = <0>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	cec@70015000 {
+		status = "okay";
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-usb-supply = <&vdd_3v3_lp0>;
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				vbus-supply = <&vdd_usb1_vbus>;
+				status = "okay";
+				mode = "otg";
+				usb-role-switch;
+			};
+
+			usb2-1 {
+				vbus-supply = <&vdd_run_cam>;
+				status = "okay";
+				mode = "host";
+			};
+
+			usb2-2 {
+				vbus-supply = <&vdd_usb3_vbus>;
+				status = "okay";
+				mode = "host";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <1>;
+				status = "okay";
+			};
+		};
+	};
+
+	mmc@700b0000 { /* WiFi/BT on this bus */
+		status = "okay";
+		bus-width = <4>;
+		no-1-8-v;
+		non-removable;
+		mmc-pwrseq = <&sdhci0_pwrseq>;
+		vmmc-supply = <&vdd_3v3_lp0>;
+		vqmmc-supply = <&vddio_1v8>;
+		keep-power-in-suspend;
+	};
+
+	mmc@700b0400 { /* SD Card on this bus */
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		no-1-8-v;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	mmc@700b0600 { /* eMMC on this bus */
+		status = "okay";
+		bus-width = <8>;
+		no-1-8-v;
+		non-removable;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "okay";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
+	ahub@70300000 {
+		i2s@70301100 {
+			status = "okay";
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_led>;
+		pwms = <&pwm 1 1000000>;
+
+		default-brightness-level = <224>;
+		brightness-levels =
+			<  0   1   2   3   4   5   6   7
+			   8   9  10  11  12  13  14  15
+			  16  17  18  19  20  21  22  23
+			  24  25  26  27  28  29  30  31
+			  32  33  34  35  36  37  38  39
+			  40  41  42  43  44  45  46  47
+			  48  49  50  51  52  53  54  55
+			  56  57  58  59  60  61  62  63
+			  64  65  66  67  68  69  70  71
+			  72  73  74  75  76  77  78  79
+			  80  81  82  83  84  85  86  87
+			  88  89  90  91  92  93  94  95
+			  96  97  98  99 100 101 102 103
+			 104 105 106 107 108 109 110 111
+			 112 113 114 115 116 117 118 119
+			 120 121 122 123 124 125 126 127
+			 128 129 130 131 132 133 134 135
+			 136 137 138 139 140 141 142 143
+			 144 145 146 147 148 149 150 151
+			 152 153 154 155 156 157 158 159
+			 160 161 162 163 164 165 166 167
+			 168 169 170 171 172 173 174 175
+			 176 177 178 179 180 181 182 183
+			 184 185 186 187 188 189 190 191
+			 192 193 194 195 196 197 198 199
+			 200 201 202 203 204 205 206 207
+			 208 209 210 211 212 213 214 215
+			 216 217 218 219 220 221 222 223
+			 224 225 226 227 228 229 230 231
+			 232 233 234 235 236 237 238 239
+			 240 241 242 243 244 245 246 247
+			 248 249 250 251 252 253 254 255
+			 256>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			#cooling-cells = <2>;
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+
+		cpu1: cpu@1 {
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			wakeup-source;
+		};
+
+		switch-lid {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>;
+			linux,code = <KEY_RESERVED>;
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	sdhci0_pwrseq: pwrseq-sdhci0 {
+		compatible = "mmc-pwrseq-simple";
+
+		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+	};
+
+	vdd_mux: regulator-mux {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_MUX";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator-5v0sys {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_sys: regulator-3v3sys {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_run: regulator-3v3run {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_RUN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_hdmi: regulator-3v3hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_run>;
+	};
+
+	vdd_led: regulator-led {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_LED";
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_5v0_ts: regulator-ts {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_VDD_TS_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_HS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb3_vbus: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_SS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_panel: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_PANEL";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_run>;
+	};
+
+	vdd_3v3_lp0: regulator-lp0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_LP0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/*
+		 * TODO: find a way to wire this up with the USB EHCI
+		 * controllers so that it can be enabled on demand.
+		 */
+		regulator-always-on;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_hdmi_pll: regulator-hdmipll {
+		compatible = "regulator-fixed";
+		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05_run>;
+	};
+
+	vdd_5v0_hdmi: regulator-hdmicon {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		nvidia,audio-routing =
+			"Headphones", "HPR",
+			"Headphones", "HPL",
+			"Speakers", "SPKR",
+			"Speakers", "SPKL",
+			"Mic Jack", "MICBIAS",
+			"DMICL", "Int Mic",
+			"DMICR", "Int Mic",
+			"IN34", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&acodec>;
+
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
+		nvidia,mic-det-gpios =
+				<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+	};
+
+	thermal-zones {
+		cpu-skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tmp451 0>;
+
+			trips {
+				cpu_passive_trip: cpu-alert0 {
+					/* throttle at 70C until temperature drops to 69.8C */
+					temperature = <70000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_passive_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+#include "../cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/nvidia/tegra124-peripherals-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra124-peripherals-opp.dtsi
new file mode 100644
index 0000000000000..b262c1289da5a
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-peripherals-opp.dtsi
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	emc_icc_dvfs_opp_table: opp-table-emc {
+		compatible = "operating-points-v2";
+
+		opp-12750000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-12750000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-12750000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-12750000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-20400000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-20400000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-20400000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-20400000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-40800000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-40800000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-40800000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-40800000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-68000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-68000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-68000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-68000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-102000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-102000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-102000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-102000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-204000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0003>;
+			opp-suspend;
+		};
+
+		opp-204000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0008>;
+			opp-suspend;
+		};
+
+		opp-204000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0010>;
+			opp-suspend;
+		};
+
+		opp-204000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0004>;
+			opp-suspend;
+		};
+
+		opp-264000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-264000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-264000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-264000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-300000000-850 {
+			opp-microvolt = <850000 850000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-300000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-300000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-300000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-348000000-850 {
+			opp-microvolt = <850000 850000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-348000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-348000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-348000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-396000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-396000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-396000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-396000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-528000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-528000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-528000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-528000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-600000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-600000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-600000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-600000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-792000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x000B>;
+		};
+
+		opp-792000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-792000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-924000000-1100 {
+			opp-microvolt = <1100000 1100000 1150000>;
+			opp-hz = /bits/ 64 <924000000>;
+			opp-supported-hw = <0x0013>;
+		};
+
+		opp-1200000000-1100 {
+			opp-microvolt = <1100000 1100000 1150000>;
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-supported-hw = <0x0003>;
+		};
+	};
+
+	emc_bw_dfs_opp_table: opp-table-actmon {
+		compatible = "operating-points-v2";
+
+		opp-12750000 {
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <204000>;
+		};
+
+		opp-20400000 {
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <326400>;
+		};
+
+		opp-40800000 {
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <652800>;
+		};
+
+		opp-68000000 {
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <1088000>;
+		};
+
+		opp-102000000 {
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		opp-204000000 {
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <3264000>;
+			opp-suspend;
+		};
+
+		opp-264000000 {
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <4224000>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <4800000>;
+		};
+
+		opp-348000000 {
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <5568000>;
+		};
+
+		opp-396000000 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <6336000>;
+		};
+
+		opp-528000000 {
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <8448000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <9600000>;
+		};
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <12672000>;
+		};
+
+		opp-924000000 {
+			opp-hz = /bits/ 64 <924000000>;
+			opp-supported-hw = <0x0013>;
+			opp-peak-kBps = <14784000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-supported-hw = <0x0003>;
+			opp-peak-kBps = <19200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124-venice2.dts b/arch/arm/boot/dts/nvidia/tegra124-venice2.dts
new file mode 100644
index 0000000000000..c697301c443c2
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-venice2.dts
@@ -0,0 +1,1256 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+	model = "NVIDIA Tegra124 Venice2";
+	compatible = "nvidia,venice2", "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_3v3_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			hdmi-supply = <&vdd_5v0_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		sor@54540000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_1v05_run>;
+			vdd-hdmi-dp-pll-supply = <&vdd_3v3_run>;
+
+			nvidia,dpaux = <&dpaux>;
+			nvidia,panel = <&panel>;
+		};
+
+		dpaux@545c0000 {
+			vdd-supply = <&vdd_3v3_panel>;
+			status = "okay";
+
+			aux-bus {
+				panel: panel {
+					compatible = "lg,lp129qe";
+					power-supply = <&vdd_3v3_panel>;
+					backlight = <&backlight>;
+				};
+			};
+		};
+	};
+
+	gpu@57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	pinmux: pinmux@70000868 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&pinmux_boot>;
+
+		pinmux_boot: pinmux {
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2",
+					      "dap1_fs_pn0",
+					      "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+					      "dap2_fs_pa2",
+					      "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+					      "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4",
+					      "pg5",
+					      "pg6",
+					      "pi3";
+				nvidia,function = "spi4";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0",
+					      "kb_row15_ps7",
+					      "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_clk_lb_out_pee4",
+					      "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6",
+					      "dap4_fs_pp4",
+					      "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5",
+					      "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+					      "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7",
+					      "pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pb0 {
+				nvidia,pins = "pb0",
+					      "pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "displaya_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4",
+					      "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <32>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <20>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <1>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,drive-type = <1>;
+			};
+			als_irq_l {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			codec_irq_l {
+				nvidia,pins = "ph4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_bl_en {
+				nvidia,pins = "ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch_irq_l {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			tpm_davint_l {
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_irq_l {
+				nvidia,pins = "pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_reset_l {
+				nvidia,pins = "pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ts_shdn_l {
+				nvidia,pins = "pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col0_ap {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lid_open {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			en_vdd_sd {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ac_ok {
+				nvidia,pins = "pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sensor_irq_l {
+				nvidia,pins = "pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			wifi_en {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_l {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hp_det_l {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		acodec: audio-codec@10 {
+			compatible = "maxim,max98090";
+			reg = <0x10>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		trackpad@4b {
+			compatible = "atmel,maxtouch";
+			reg = <0x4b>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+			linux,gpio-keymap = <0 0 0 BTN_LEFT>;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1_2_4_7 {
+					pins = "gpio1", "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_6 {
+					pins = "gpio3", "gpio6";
+					bias-high-impedance;
+				};
+
+				gpio5 {
+					pins = "gpio5";
+					function = "clk32k-out";
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <2500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				avdd_1v05_run: ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.00V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				vdd_run_cam: ldo4 {
+					regulator-name = "+3.3V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.8V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	spi@7000d400 {
+		status = "okay";
+
+		cros_ec: cros-ec@0 {
+			compatible = "google,cros-ec-spi";
+			spi-max-frequency = <4000000>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+			reg = <0>;
+
+			google,cros-ec-spi-msg-delay = <2000>;
+
+			i2c-tunnel {
+				compatible = "google,cros-ec-i2c-tunnel";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				google,remote-bus = <0>;
+
+				charger: bq24735@9 {
+					compatible = "ti,bq24735";
+					reg = <0x9>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(J, 0)
+							IRQ_TYPE_EDGE_BOTH>;
+					ti,ac-detect-gpios = <&gpio
+							TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+				};
+
+				battery: sbs-battery@b {
+					compatible = "sbs,sbs-battery";
+					reg = <0xb>;
+					sbs,i2c-retry-count = <2>;
+					sbs,poll-retry-count = <1>;
+				};
+			};
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		flash@0 {
+			compatible = "winbond,w25q32dw", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-usb-supply = <&vdd_3v3_lp0>;
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+				usb-role-switch;
+				vbus-supply = <&vdd_usb1_vbus>;
+			};
+
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_run_cam>;
+			};
+
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_usb3_vbus>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	mmc@700b0400 {
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+		status = "okay";
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	ahub@70300000 {
+		i2s@70301100 {
+			status = "okay";
+		};
+	};
+
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb1_vbus>;
+	};
+
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&vdd_run_cam>;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb3_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_led>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	vdd_mux: regulator-mux {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_MUX";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator-5v0sys {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_sys: regulator-3v3sys {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_run: regulator-3v3run {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_RUN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_hdmi: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_run>;
+	};
+
+	vdd_led: regulator-led {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_LED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_5v0_ts: regulator-ts {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_VDD_TS_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_HS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb3_vbus: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_SS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_panel: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_PANEL";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_run>;
+	};
+
+	vdd_3v3_lp0: regulator-lp0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_LP0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/*
+		 * TODO: find a way to wire this up with the USB EHCI
+		 * controllers so that it can be enabled on demand.
+		 */
+		regulator-always-on;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_hdmi_pll: regulator-hdmipll {
+		compatible = "regulator-fixed";
+		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05_run>;
+	};
+
+	vdd_5v0_hdmi: regulator-hdmicon {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-venice2",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "NVIDIA Tegra Venice2";
+
+		nvidia,audio-routing =
+			"Headphones", "HPR",
+			"Headphones", "HPL",
+			"Speakers", "SPKR",
+			"Speakers", "SPKL",
+			"Mic Jack", "MICBIAS",
+			"IN34", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&acodec>;
+
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
+	};
+};
+
+#include "../cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/nvidia/tegra124.dtsi b/arch/arm/boot/dts/nvidia/tegra124.dtsi
new file mode 100644
index 0000000000000..b3fbecf5c8188
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124.dtsi
@@ -0,0 +1,1366 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra124-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra124-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/tegra124-car.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+#include <dt-bindings/soc/tegra-pmc.h>
+
+#include "tegra124-peripherals-opp.dtsi"
+
+/ {
+	compatible = "nvidia,tegra124";
+	interrupt-parent = <&lic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pcie@1003000 {
+		compatible = "nvidia,tegra124-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x01000000 0 0x0        0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */
+			 <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA124_CLK_PCIE>,
+			 <&tegra_car TEGRA124_CLK_AFI>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>,
+			 <&tegra_car TEGRA124_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra124-host1x";
+		reg = <0x0 0x50000000 0x0 0x00034000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA124_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
+		iommus = <&mc TEGRA_SWGROUP_HC>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
+
+		dc@54200000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54200000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP1>;
+			clock-names = "dc";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+
+			interconnects = <&mc TEGRA124_MC_DISPLAY0A &emc>,
+					<&mc TEGRA124_MC_DISPLAY0B &emc>,
+					<&mc TEGRA124_MC_DISPLAY0C &emc>,
+					<&mc TEGRA124_MC_DISPLAYHC &emc>,
+					<&mc TEGRA124_MC_DISPLAYD &emc>,
+					<&mc TEGRA124_MC_DISPLAYT &emc>;
+			interconnect-names = "wina",
+					     "winb",
+					     "winc",
+					     "cursor",
+					     "wind",
+					     "wint";
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54240000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP2>;
+			clock-names = "dc";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+
+			interconnects = <&mc TEGRA124_MC_DISPLAY0AB &emc>,
+					<&mc TEGRA124_MC_DISPLAY0BB &emc>,
+					<&mc TEGRA124_MC_DISPLAY0CB &emc>,
+					<&mc TEGRA124_MC_DISPLAYHCB &emc>;
+			interconnect-names = "wina",
+					     "winb",
+					     "winc",
+					     "cursor";
+		};
+
+		hdmi: hdmi@54280000 {
+			compatible = "nvidia,tegra124-hdmi";
+			reg = <0x0 0x54280000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+				 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		vic@54340000 {
+			compatible = "nvidia,tegra124-vic";
+			reg = <0x0 0x54340000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_VIC03>;
+			clock-names = "vic";
+			resets = <&tegra_car 178>;
+			reset-names = "vic";
+
+			iommus = <&mc TEGRA_SWGROUP_VIC>;
+		};
+
+		sor@54540000 {
+			compatible = "nvidia,tegra124-sor";
+			reg = <0x0 0x54540000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_SOR0>,
+				 <&tegra_car TEGRA124_CLK_SOR0_OUT>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>,
+				 <&tegra_car TEGRA124_CLK_CLK_M>;
+			clock-names = "sor", "out", "parent", "dp", "safe";
+			resets = <&tegra_car 182>;
+			reset-names = "sor";
+			status = "disabled";
+		};
+
+		dpaux: dpaux@545c0000 {
+			compatible = "nvidia,tegra124-dpaux";
+			reg = <0x0 0x545c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DPAUX>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 181>;
+			reset-names = "dpaux";
+			status = "disabled";
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x50041000 0x0 0x1000>,
+		      <0x0 0x50042000 0x0 0x1000>,
+		      <0x0 0x50044000 0x0 0x2000>,
+		      <0x0 0x50046000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	gpu@57000000 {
+		compatible = "nvidia,gk20a";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA124_CLK_GPU>,
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pwr";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+
+		status = "disabled";
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra124-ictlr", "nvidia,tegra30-ictlr";
+		reg = <0x0 0x60004000 0x0 0x100>,
+		      <0x0 0x60004100 0x0 0x100>,
+		      <0x0 0x60004200 0x0 0x100>,
+		      <0x0 0x60004300 0x0 0x100>,
+		      <0x0 0x60004400 0x0 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer";
+		reg = <0x0 0x60005000 0x0 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra124-car";
+		reg = <0x0 0x60006000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		nvidia,external-memory-controller = <&emc>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra124-flowctrl";
+		reg = <0x0 0x60007000 0x0 0x1000>;
+	};
+
+	actmon: actmon@6000c800 {
+		compatible = "nvidia,tegra124-actmon";
+		reg = <0x0 0x6000c800 0x0 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
+			 <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "actmon", "emc";
+		resets = <&tegra_car 119>;
+		reset-names = "actmon";
+		operating-points-v2 = <&emc_bw_dfs_opp_table>;
+		interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
+		interconnect-names = "cpu-read";
+		#cooling-cells = <2>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		reg = <0x0 0x6000d000 0x0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		gpio-ranges = <&pinmux 0 0 251>;
+	};
+
+	apbdma: dma@60020000 {
+		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
+		reg = <0x0 0x60020000 0x0 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
+		      <0x0 0x7000e864 0x0 0x04>;   /* Strapping options */
+	};
+
+	pinmux: pinmux@70000868 {
+		compatible = "nvidia,tegra124-pinmux";
+		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
+		      <0x0 0x70003000 0x0 0x434>, /* Mux registers */
+		      <0x0 0x70000820 0x0 0x008>; /* MIPI pad control */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006040 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006200 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006300 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
+		reg = <0x0 0x7000a000 0x0 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA124_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c000 0x0 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c400 0x0 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c500 0x0 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c700 0x0 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000d000 0x0 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d100 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000d100 0x0 0x100>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 166>;
+		reset-names = "i2c";
+		dmas = <&apbdma 30>, <&apbdma 30>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d400 0x0 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d600 0x0 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d800 0x0 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000da00 0x0 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000dc00 0x0 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC5>;
+		clock-names = "spi";
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000de00 0x0 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC6>;
+		clock-names = "spi";
+		resets = <&tegra_car 105>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
+		reg = <0x0 0x7000e000 0x0 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_RTC>;
+	};
+
+	tegra_pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra124-pmc";
+		reg = <0x0 0x7000e400 0x0 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra124-efuse";
+		reg = <0x0 0x7000f800 0x0 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	cec@70015000 {
+		compatible = "nvidia,tegra124-cec";
+		reg = <0x0 0x70015000 0x0 0x00001000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_CEC>;
+		clock-names = "cec";
+		status = "disabled";
+		hdmi-phandle = <&hdmi>;
+	};
+
+	mc: memory-controller@70019000 {
+		compatible = "nvidia,tegra124-mc";
+		reg = <0x0 0x70019000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+		#reset-cells = <1>;
+		#interconnect-cells = <1>;
+	};
+
+	emc: external-memory-controller@7001b000 {
+		compatible = "nvidia,tegra124-emc";
+		reg = <0x0 0x7001b000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "emc";
+
+		nvidia,memory-controller = <&mc>;
+		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
+
+		#interconnect-cells = <0>;
+	};
+
+	sata@70020000 {
+		compatible = "nvidia,tegra124-ahci";
+		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
+		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SATA>,
+			 <&tegra_car TEGRA124_CLK_SATA_OOB>;
+		clock-names = "sata", "sata-oob";
+		resets = <&tegra_car 124>,
+			 <&tegra_car 129>,
+			 <&tegra_car 123>;
+		reset-names = "sata", "sata-cold", "sata-oob";
+		status = "disabled";
+	};
+
+	hda@70030000 {
+		compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
+		reg = <0x0 0x70030000 0x0 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_HDA>,
+			 <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
+	usb@70090000 {
+		compatible = "nvidia,tegra124-xusb";
+		reg = <0x0 0x70090000 0x0 0x8000>,
+		      <0x0 0x70098000 0x0 0x1000>,
+		      <0x0 0x70099000 0x0 0x1000>;
+		reg-names = "hcd", "fpci", "ipfs";
+
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+			 <&tegra_car TEGRA124_CLK_CLK_M>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
+		clock-names = "xusb_host", "xusb_host_src",
+			      "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_div2", "xusb_ss_src",
+			      "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		resets = <&tegra_car 89>, <&tegra_car 156>,
+			 <&tegra_car 143>;
+		reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+		nvidia,xusb-padctl = <&padctl>;
+
+		status = "disabled";
+	};
+
+	padctl: padctl@7009f000 {
+		compatible = "nvidia,tegra124-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+
+		pads {
+			usb2 {
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			ulpi {
+				status = "disabled";
+
+				lanes {
+					ulpi-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			hsic {
+				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					hsic-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			pcie {
+				status = "disabled";
+
+				lanes {
+					pcie-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-4 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			sata {
+				status = "disabled";
+
+				lanes {
+					sata-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "disabled";
+			};
+
+			usb2-1 {
+				status = "disabled";
+			};
+
+			usb2-2 {
+				status = "disabled";
+			};
+
+			ulpi-0 {
+				status = "disabled";
+			};
+
+			hsic-0 {
+				status = "disabled";
+			};
+
+			hsic-1 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
+				status = "disabled";
+			};
+		};
+	};
+
+	mmc@700b0000 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0000 0x0 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@700b0200 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0200 0x0 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC2>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@700b0400 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0400 0x0 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC3>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@700b0600 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0600 0x0 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC4>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	soctherm: thermal-sensor@700e2000 {
+		compatible = "nvidia,tegra124-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */
+		      <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+		reg-names = "soctherm-reg", "car-reg";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "thermal", "edp";
+		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+			 <&tegra_car TEGRA124_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-percent = <85>;
+				nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+				#cooling-cells = <2>;
+			};
+		};
+	};
+
+	dfll: clock@70110000 {
+		compatible = "nvidia,tegra124-dfll";
+		reg = <0 0x70110000 0 0x100>, /* DFLL control */
+		      <0 0x70110000 0 0x100>, /* I2C output control */
+		      <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+		      <0 0x70110200 0 0x100>; /* Look-up table RAM */
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+			 <&tegra_car TEGRA124_CLK_DFLL_REF>,
+			 <&tegra_car TEGRA124_CLK_I2C5>;
+		clock-names = "soc", "ref", "i2c";
+		resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+		reset-names = "dvco";
+		#clock-cells = <0>;
+		clock-output-names = "dfllCPU_out";
+		nvidia,sample-rate = <12500>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,cf = <10>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		status = "disabled";
+	};
+
+	ahub@70300000 {
+		compatible = "nvidia,tegra124-ahub";
+		reg = <0x0 0x70300000 0x0 0x200>,
+		      <0x0 0x70300800 0x0 0x800>,
+		      <0x0 0x70300200 0x0 0x600>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA124_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>,  /* spdif */
+			 <&tegra_car 153>, /* amx */
+			 <&tegra_car 185>, /* amx1 */
+			 <&tegra_car 154>, /* adx */
+			 <&tegra_car 180>, /* adx1 */
+			 <&tegra_car 186>, /* afc0 */
+			 <&tegra_car 187>, /* afc1 */
+			 <&tegra_car 188>, /* afc2 */
+			 <&tegra_car 189>, /* afc3 */
+			 <&tegra_car 190>, /* afc4 */
+			 <&tegra_car 191>; /* afc5 */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif", "amx", "amx1", "adx", "adx1",
+			      "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>,
+		       <&apbdma 6>, <&apbdma 6>,
+		       <&apbdma 7>, <&apbdma 7>,
+		       <&apbdma 12>, <&apbdma 12>,
+		       <&apbdma 13>, <&apbdma 13>,
+		       <&apbdma 14>, <&apbdma 14>,
+		       <&apbdma 29>, <&apbdma 29>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+			    "rx9", "tx9";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		tegra_i2s0: i2s@70301000 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301000 0x0 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S0>;
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@70301100 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301100 0x0 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S1>;
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@70301200 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301200 0x0 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S2>;
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@70301300 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301300 0x0 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S3>;
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@70301400 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301400 0x0 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S4>;
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+		reg = <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d000000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+		reg = <0x0 0x7d004000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d004000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 1>;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+		reg = <0x0 0x7d008000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d008000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 2>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
+				 <&tegra_car TEGRA124_CLK_CCLK_LP>,
+				 <&tegra_car TEGRA124_CLK_PLL_X>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>,
+				 <&dfll>;
+			clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+			/* FIXME: what's the actual transition time? */
+			clock-latency = <300000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&{/cpus/cpu@0}>,
+				     <&{/cpus/cpu@1}>,
+				     <&{/cpus/cpu@2}>,
+				     <&{/cpus/cpu@3}>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				cpu_throttle_trip: throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				mem-throttle-trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				gpu_throttle_trip: throttle-trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		pllx-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				pllx-throttle-trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/nvidia/tegra20-acer-a500-picasso.dts
new file mode 100644
index 0000000000000..08b42952f4de3
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-acer-a500-picasso.dts
@@ -0,0 +1,1525 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/atmel-maxtouch.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "Acer Iconia Tab A500";
+	compatible = "acer,picasso", "nvidia,tegra20";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* MicroSD */
+		mmc2 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Docking station */
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@2ffe0000 {
+			compatible = "ramoops";
+			reg = <0x2ffe0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		linux,cma@30000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x30000000 0x10000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <18>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_5v0_sys>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp", "lm1";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lsc0",
+					"lsc1", "lsck", "lsda", "lspi", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "csus", "dap1",
+					"dap4", "dte", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "gpv", "i2cp",
+					"irrx", "irtx", "pta", "rm",
+					"sdc", "sdd", "slxc", "slxd", "slxk",
+					"spdi", "spdo", "uac", "uad", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ate {
+				nvidia,pins = "ate", "dap2", "dap3",
+					"gmd", "owc", "spia", "spib", "spic",
+					"spid", "spie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "gmb", "slxa", "spig",
+					"spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "kbcb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dte {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi",
+					"lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa",
+					"uab", "uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			drive_ddc {
+				nvidia,pins = "drive_ddc",
+						"drive_vi1",
+						"drive_sdio1";
+				nvidia,pull-up-strength = <31>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+			drive_dbg {
+				nvidia,pins = "drive_dbg",
+						"drive_vi2",
+						"drive_at1",
+						"drive_ao1";
+				nvidia,pull-up-strength = <31>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_idle: pinmux-i2cmux-idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux-i2cmux-pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+	};
+
+	tegra_spdif: spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	tegra_i2s1: i2s@70002800 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
+		/* GPS BCM4751 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Azurewave AW-NH665 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			/* PLLP 216MHz / 16 / 4 */
+			max-speed = <3375000>;
+
+			clocks = <&rtc_32k_wifi>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_sys>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	uartd: serial@70006300 {
+		/* Docking station */
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_BOTH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <
+				0x0000 /* MIC_LR_OUT#    GPIO, output, low */
+				0x0000 /* FM2018-enable  GPIO, output, low */
+				0x0000 /* Speaker-enable GPIO, output, low */
+				0x0200 /* Interrupt, output */
+				0x01a0 /* BCLK, input, active high */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_sys>;
+			CPVDD-supply = <&vdd_1v8_sys>;
+			DBVDD-supply = <&vdd_1v8_sys>;
+			DCVDD-supply = <&vdd_1v8_sys>;
+		};
+
+		touchscreen@4c {
+			compatible = "atmel,maxtouch";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_sys>;
+
+			mount-matrix =	 "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0x0f>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply   = <&vdd_1v8_sys>;
+					vddio-supply = <&vdd_1v8_sys>;
+
+					mount-matrix =	 "0",  "1",  "0",
+							 "1",  "0",  "0",
+							 "0",  "0", "-1";
+				};
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <10000>;
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <100000>;
+		status = "okay";
+
+		magnetometer@c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0x0c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+			vid-supply = <&vdd_1v8_sys>;
+
+			mount-matrix =	"1",  "0",  "0",
+					"0", "-1",  "0",
+					"0",  "0", "-1";
+		};
+
+		pmic: pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply       = <&vdd_5v0_sys>;
+			vin-sm0-supply   = <&sys_reg>;
+			vin-sm1-supply   = <&sys_reg>;
+			vin-sm2-supply   = <&sys_reg>;
+			vinldo01-supply  = <&sm2_reg>;
+			vinldo23-supply  = <&sm2_reg>;
+			vinldo4-supply   = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply   = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_cpu: sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				rtc_vdd: ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				avdd_vdac_reg: ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@0 {
+			nvidia,ram-code = <0>; /* elpida-8gb */
+			reg = <0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dd510 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e1 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e1510 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+
+		emc-tables@1 {
+			nvidia,ram-code = <1>; /* elpida-4gb */
+			reg = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007e4010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e1 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+
+		emc-tables@2 {
+			nvidia,ram-code = <2>; /* hynix-8gb */
+			reg = <2>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dd010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e1 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e2010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+
+		emc-tables@3 {
+			nvidia,ram-code = <3>; /* hynix-4gb */
+			reg = <3>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00078000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007e4010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e1 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+	};
+
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_1v8_sys>;
+
+		/* Azurewave AW-NH611 BCM4329 */
+		wifi@1 {
+			reg = <1>;
+			compatible = "brcm,bcm4329-fmac";
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 41667>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	bat1010: battery-2s1p {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3260000>;
+		energy-full-design-microwatt-hours = <24000000>;
+		operating-range-celsius = <0 40>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k-in {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "tps658621-out32k";
+	};
+
+	/*
+	 * This standalone onboard fixed-clock always-ON 32KHz
+	 * oscillator is used as a reference clock-source by the
+	 * Azurewave WiFi/BT module.
+	 */
+	rtc_32k_wifi: clock-32k-wifi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "kk3270032";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "auo,b101ew05", "panel-lvds";
+
+		ddc-i2c-bus = <&panel_ddc>;
+		power-supply = <&vdd_pnl>;
+		backlight = <&backlight>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-rotation-lock {
+			label = "Rotate-lock";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
+			linux,code = <SW_ROTATE_LOCK>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		panel_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			embedded-controller@58 {
+				compatible = "acer,a500-iconia-ec", "ene,kb930";
+				reg = <0x58>;
+
+				system-power-controller;
+
+				monitored-battery = <&bat1010>;
+				power-supplies = <&mains>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-666000000;
+		/delete-node/ opp-760000000;
+	};
+
+	vdd_5v0_sys: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_1v8_sys: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <300000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-picasso",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Acer Iconia Tab A500 WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "LINEOUTL",
+			"Int Spk", "LINEOUTR",
+			"Mic Jack", "MICBIAS",
+			"IN2L", "Mic Jack",
+			"IN2R", "Mic Jack",
+			"IN1L", "Int Mic",
+			"IN1R", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
+		nvidia,headset;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		/*
+		 * NCT1008 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents A500 from
+		 * getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* start throttling at 60C */
+					temperature = <60000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 70C */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&rtc_32k_wifi>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
new file mode 100644
index 0000000000000..c2a9c3fb5b337
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
@@ -0,0 +1,1291 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/atmel-maxtouch.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "ASUS EeePad Transformer TF101";
+	compatible = "asus,tf101", "nvidia,tegra20";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* MicroSD */
+		mmc2 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd;
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@2ffe0000 {
+			compatible = "ramoops";
+			reg = <0x2ffe0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		linux,cma@30000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x30000000 0x10000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <18>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_hdmi_en>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio@6000d000 {
+		charging-enable-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+
+			lm1 {
+				nvidia,pins = "lm1";
+				nvidia,function = "rsvd3";
+			};
+
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+
+			gpv {
+				nvidia,pins = "gpv", "slxa";
+				nvidia,function = "pcie";
+			};
+
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
+					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
+				nvidia,function = "sdio3";
+			};
+
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap4",
+					"dte", "ddc", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "gpv", "i2cp",
+					"irrx", "irtx", "pta", "rm", "sdc",
+					"sdd", "slxc", "slxd", "slxk", "spdi",
+					"spdo", "uac", "uad",
+					"uda", "csus";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_ate {
+				nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd",
+					"owc", "spia", "spib", "spic",
+					"spid", "spie", "spig", "slxa";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+
+			conf_crtp {
+				nvidia,pins = "crtp", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_spif {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa", "uab",
+					"uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			drive_csus {
+				nvidia,pins = "drive_csus";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_idle: pinmux-i2cmux-idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux-i2cmux-pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+	};
+
+	spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	i2s@70002800 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
+		/* GPS BCM4751 */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			/* PLLP 216MHz / 16 / 4 */
+			max-speed = <3375000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_sys>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0xe>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8_sys>;
+
+			mount-matrix = "-1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_BOTH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0x83>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <
+				0x00000600 /* DMIC_LR, output */
+				0x00000680 /* DMIC_DAT, input */
+				0x00000000 /* Speaker-enable GPIO, output, low */
+				0xffffffff /* don't touch */
+				0xffffffff /* don't touch */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_sys>;
+			CPVDD-supply = <&vdd_1v8_sys>;
+			DBVDD-supply = <&vdd_1v8_sys>;
+			DCVDD-supply = <&vdd_1v8_sys>;
+		};
+
+		/* Atmel MXT1386 Touchscreen */
+		touchscreen@5b {
+			compatible = "atmel,maxtouch";
+			reg = <0x5b>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_sys>;
+
+			mount-matrix =	 "0",  "1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0",  "1";
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0xf>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_sys>;
+					vddio-supply = <&vdd_1v8_sys>;
+
+					mount-matrix =	"-1",  "0",  "0",
+							 "0", "-1",  "0",
+							 "0",  "0", "-1";
+				};
+			};
+		};
+	};
+
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_sys>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_cpu: sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				rtc_vdd: ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@3 {
+			reg = <0x3>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dc010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e0 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			lpddr2 {
+				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+				revision-id = <1 0>;
+				density = <2048>;
+				io-width = <16>;
+			};
+		};
+	};
+
+	/* Peripheral USB via ASUS connector */
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <40000000>;
+
+		max-frequency = <40000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 4000000>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k-in {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "auo,b101ew05", "panel-lvds";
+
+		/* AUO B101EW05 using custom timings */
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-dock-hall-sensor {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c2>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+				power-supplies = <&mains>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-666000000;
+		/delete-node/ opp-760000000;
+	};
+
+	vdd_5v0_sys: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie_vdd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	vdd_pnl_reg: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_1v8_sys: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hdmi_en: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_hdmi_en";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-wm8903-tf101",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Asus EeePad Transformer WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN2L", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		/*
+		 * NCT1008 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents TF101 from
+		 * getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* start throttling at 60C */
+					temperature = <60000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 70C */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		power-off-delay-us = <200>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/nvidia/tegra20-colibri-eval-v3.dts
new file mode 100644
index 0000000000000..612f4e54cb202
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-colibri-eval-v3.dts
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri T20 on Colibri Evaluation Board";
+	compatible = "toradex,colibri_t20-eval-v3", "toradex,colibri_t20",
+		     "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@34";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartd;
+		serial2 = &uartb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	pinmux@70000014 {
+		state_default: pinmux {
+			bl-on {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			ddc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			hotplug-detect {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			i2c {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			lm1 {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			mmc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			mmccd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdb_sdd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			ssp {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-a {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-b {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-c {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			usbh-pen {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	/* Colibri UART-A */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Colibri UART-C */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Colibri UART-B */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/* CAM_I2C (I2C3): unused */
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	i2c@7000c400 {
+		status = "okay";
+	};
+
+	/* SPI4: Colibri SSP */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			/* CAN_INT */
+			interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+			vdd-supply = <&reg_3v3>;
+			xceiver-supply = <&reg_5v0>;
+		};
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+	usb@c5000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbc_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* SD/MMC */
+	mmc@c8000600 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+		no-1-8-v;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 128 64 32 16 8 4 0>;
+		default-brightness-level = <6>;
+		/* BL_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* PWM<A> */
+	};
+
+	clk16m: clock-osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			label = "SODIMM pin 45 wakeup";
+			gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbc_vbus: regulator-usbc-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_PEN resp. USB_P_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-colibri-iris.dts b/arch/arm/boot/dts/nvidia/tegra20-colibri-iris.dts
new file mode 100644
index 0000000000000..25a9f5dfe62d0
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-colibri-iris.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri T20 on Iris";
+	compatible = "toradex,colibri_t20-iris", "toradex,colibri_t20",
+		     "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@34";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartd;
+		serial2 = &uartb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	pinmux@70000014 {
+		state_default: pinmux {
+			bl-on {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			ddc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			hotplug-detect {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			i2c {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			lm1 {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			mmc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			mmccd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdb_sdd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			ssp {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-a {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-b {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-c {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			usbh-pen {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	/* Colibri UART-A */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Colibri UART-C */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Colibri UART-B */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/* CAM_I2C (I2C3): unused */
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	i2c@7000c400 {
+		status = "okay";
+	};
+
+	/* SPI4: Colibri SSP */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+	usb@c5000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbc_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* SD/MMC */
+	mmc@c8000600 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+		no-1-8-v;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 128 64 32 16 8 4 0>;
+		default-brightness-level = <6>;
+		/* BL_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* PWM<A> */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			label = "SODIMM pin 45 wakeup";
+			gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbc_vbus: regulator-usbc-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_PEN resp. USB_P_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
new file mode 100644
index 0000000000000..0e03910abbe64
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
@@ -0,0 +1,776 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra20.dtsi"
+
+/*
+ * Toradex Colibri T20 Module Device Tree
+ * Compatible for Revisions Colibri T20 256MB V1.1B, V1.2A;
+ * Colibri T20 256MB IT V1.2A; Colibri T20 512MB V1.1C, V1.2A;
+ * Colibri T20 512MB IT V1.2A
+ */
+/ {
+	memory@0 {
+		/*
+		 * Set memory to 256 MB to be safe as this could be used on
+		 * 256 or 512 MB module. It is expected from bootloader
+		 * to fix this up for 512 MB version.
+		 */
+		reg = <0x00000000 0x10000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+		};
+	};
+
+	gpio@6000d000 {
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET#";
+		};
+
+		/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
+		npwe-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "Tri-state nPWE";
+		};
+
+		/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
+		rdnwr-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "Not tri-state RDnWR";
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio AC97 to WM9712 (On-module) */
+			audio-refclk {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * AC97_RESET, ULPI_RESET, AC97_INT aka WM9712 GENIRQ
+			 * (All on-module), SODIMM Pin 45 Wakeup
+			 */
+			gpio-uac {
+				nvidia,pins = "uac";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * Buffer Enables for nPWE and RDnWR (On-module,
+			 * see GPIO hogging further down below)
+			 */
+			gpio-pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * CLK_32K_OUT, CORE_PWR_REQ, CPU_PWR_REQ, PWR_INT_N,
+			 * SYS_CLK_REQ (All on-module)
+			 */
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * Colibri Address/Data Bus (GMI)
+			 * Note: spid and spie optionally used for SPI1
+			 */
+			gmi {
+				nvidia,pins = "atc", "atd", "ate", "dap1",
+					      "dap2", "dap4", "gmd", "gpu",
+					      "irrx", "irtx", "spia", "spib",
+					      "spic", "spid", "spie", "uca",
+					      "ucb";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			/* Further pins may be used as GPIOs */
+			gmi-gpio1 {
+				nvidia,pins = "lpw0", "lsc1", "lsck", "lsda";
+				nvidia,function = "hdmi";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-gpio2 {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lsdi";
+				nvidia,function = "rsvd4";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri BL_ON */
+			bl-on {
+				nvidia,pins = "dta";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri Backlight PWM<A>, PWM<B> */
+			sdc {
+				nvidia,pins = "sdc";
+				nvidia,function = "pwm";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri DDC */
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * Colibri EXT_IO*
+			 * Note: dtf optionally used for I2C3
+			 */
+			ext-io {
+				nvidia,pins = "dtf", "spdi";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * Colibri Ethernet (On-module)
+			 * ULPI EHCI instance 1 USB2_DP/N -> AX88772B
+			 */
+			ulpi {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-refclk {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri HOTPLUG_DETECT (HDMI) */
+			hotplug-detect {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri I2C */
+			i2c {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
+			 * today's display need DE, disable LCD_M1
+			 */
+			lm1 {
+				nvidia,pins = "lm1";
+				nvidia,function = "rsvd3";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri LCD (L_* resp. LDD<*>) */
+			lcd {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3",
+					      "ld4", "ld5", "ld6", "ld7",
+					      "ld8", "ld9", "ld10", "ld11",
+					      "ld12", "ld13", "ld14", "ld15",
+					      "ld16", "ld17", "lhs", "lsc0",
+					      "lspi", "lvs";
+				nvidia,function = "displaya";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			/* Colibri LCD (Optional 24 BPP Support) */
+			lcd-24 {
+				nvidia,pins = "ldi", "lhp0", "lhp1", "lhp2",
+					      "lpp", "lvp1";
+				nvidia,function = "displaya";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri MMC */
+			mmc {
+				nvidia,pins = "atb", "gma";
+				nvidia,function = "sdio4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri MMCCD */
+			mmccd {
+				nvidia,pins = "gmb";
+				nvidia,function = "gmi_int";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri MMC (Optional 8-bit) */
+			mmc-8bit {
+				nvidia,pins = "gme";
+				nvidia,function = "sdio4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * Colibri Parallel Camera (Optional)
+			 * pins multiplexed with others and therefore disabled
+			 * Note: dta used for BL_ON by default
+			 */
+			cif-mclk {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			cif {
+				nvidia,pins = "dtb", "dtc", "dtd";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri PWM<C>, PWM<D> */
+			sdb_sdd {
+				nvidia,pins = "sdb", "sdd";
+				nvidia,function = "pwm";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri SSP */
+			ssp {
+				nvidia,pins = "slxa", "slxc", "slxd", "slxk";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri UART-A */
+			uart-a {
+				nvidia,pins = "sdio1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			uart-a-dsr {
+				nvidia,pins = "lpw1";
+				nvidia,function = "rsvd3";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			uart-a-dcd {
+				nvidia,pins = "lpw2";
+				nvidia,function = "hdmi";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri UART-B */
+			uart-b {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri UART-C */
+			uart-c {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri USB_CDET */
+			usb-cdet {
+				nvidia,pins = "spdo";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri USBH_OC */
+			usbh-oc {
+				nvidia,pins = "spih";
+				nvidia,function = "spi2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri USBH_PEN */
+			usbh-pen {
+				nvidia,pins = "spig";
+				nvidia,function = "spi2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri VGA not supported */
+			vga {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C3 (Optional) */
+			i2c3 {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* JTAG_RTCK */
+			jtag-rtck {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * LAN_RESET, LAN_EXT_WAKEUP and LAN_PME
+			 * (All On-module)
+			 */
+			gpio-gpv {
+				nvidia,pins = "gpv";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * LAN_V_BUS, VDD_FAULT, BATT_FAULT, WM9712 PENDOWN
+			 * (All On-module); Colibri CAN_INT
+			 */
+			gpio-dte {
+				nvidia,pins = "dte";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* NAND (On-module) */
+			nand {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					      "kbce", "kbcf";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Onewire (Optional) */
+			owr {
+				nvidia,pins = "owc";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Power I2C (On-module) */
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* RESET_OUT */
+			reset-out {
+				nvidia,pins = "ata";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * SPI1 (Optional)
+			 * Note: spid and spie used for Colibri Address/Data
+			 *       Bus (GMI)
+			 */
+			spi1 {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT# (On-module), unlatched I2C address pin
+			 * of LM95245 temperature sensor therefore requires
+			 * disabling for now
+			 */
+			lvp0 {
+				nvidia,pins = "lvp0";
+				nvidia,function = "rsvd3";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	tegra_ac97: ac97@70002000 {
+		status = "okay";
+		nvidia,codec-reset-gpio =
+			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+		nvidia,codec-sync-gpio =
+			<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	nand-controller@70008000 {
+		status = "okay";
+
+		nand@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			nand-bus-width = <8>;
+			nand-on-flash-bbt;
+			nand-ecc-algo = "bch";
+			nand-is-boot-medium;
+			nand-ecc-maximize;
+			wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	/* DDC_SCL/SDA on X3 pin 15/16 (e.g. display EDID) */
+	hdmi_ddc: i2c@7000c400 {
+		clock-frequency = <10000>;
+	};
+
+	/* GEN2_I2C: unused */
+
+	/* CAM/GEN3_I2C: used as EXT_IO1/2 GPIOs on SODIMM pin 133/127 */
+
+	/* PWR_I2C: power I2C to PMIC and temperature sensor (On-module) */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			ti,system-power-controller;
+			#gpio-cells = <2>;
+			gpio-controller;
+			sys-supply = <&reg_module_3v3>;
+			vin-sm0-supply = <&reg_3v3_vsys>;
+			vin-sm1-supply = <&reg_3v3_vsys>;
+			vin-sm2-supply = <&reg_3v3_vsys>;
+			vinldo01-supply = <&reg_1v8_vdd_ddr2>;
+			vinldo23-supply = <&reg_module_3v3>;
+			vinldo4-supply = <&reg_module_3v3>;
+			vinldo678-supply = <&reg_module_3v3>;
+			vinldo9-supply = <&reg_module_3v3>;
+
+			regulators {
+				reg_3v3_vsys: sys {
+					regulator-name = "VSYS_3.3V";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "VDD_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "VDD_CPU_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				reg_1v8_vdd_ddr2: sm2 {
+					regulator-name = "VDD_DDR2_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				/*
+				 * +3.3V_ENABLE_N switching via FET:
+				 * AVDD_AUDIO_S and +3.3V
+				 * see also +3.3V fixed supply
+				 */
+				ldo1 {
+					regulator-name = "AVDD_PLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "VDD_RTC_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4 {
+					regulator-name = "VDDIO_SYS_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* Switched via FET from regular +3.3V */
+				ldo5 {
+					regulator-name = "+3.3V_USB";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "AVDD_VDAC_2.85V";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				reg_3v3_avdd_hdmi: ldo7 {
+					regulator-name = "AVDD_HDMI_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				reg_1v8_avdd_hdmi_pll: ldo8 {
+					regulator-name = "AVDD_HDMI_PLL_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "VDDIO_RX_DDR_2.85V";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "VCC_BATT";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/* LM95245 temperature sensor */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		/* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <3>;
+			nvidia,bus-addr = <0x34>;
+			nvidia,reg-addr = <0x14>;
+			nvidia,reg-data = <0x8>;
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-table@83250 {
+			reg = <83250>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <83250>;
+			nvidia,emc-registers =   <0x00000005 0x00000011
+				0x00000004 0x00000002 0x00000004 0x00000004
+				0x00000001 0x0000000a 0x00000002 0x00000002
+				0x00000001 0x00000001 0x00000003 0x00000004
+				0x00000003 0x00000009 0x0000000c 0x0000025f
+				0x00000000 0x00000003 0x00000003 0x00000002
+				0x00000002 0x00000001 0x00000008 0x000000c8
+				0x00000003 0x00000005 0x00000003 0x0000000c
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0x00520006
+				0x00000010 0x00000008 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+		emc-table@133200 {
+			reg = <133200>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <133200>;
+			nvidia,emc-registers =   <0x00000008 0x00000019
+				0x00000006 0x00000002 0x00000004 0x00000004
+				0x00000001 0x0000000a 0x00000002 0x00000002
+				0x00000002 0x00000001 0x00000003 0x00000004
+				0x00000003 0x00000009 0x0000000c 0x0000039f
+				0x00000000 0x00000003 0x00000003 0x00000002
+				0x00000002 0x00000001 0x00000008 0x000000c8
+				0x00000003 0x00000007 0x00000003 0x0000000c
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0x00510006
+				0x00000010 0x00000008 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+		emc-table@166500 {
+			reg = <166500>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <166500>;
+			nvidia,emc-registers =   <0x0000000a 0x00000021
+				0x00000008 0x00000003 0x00000004 0x00000004
+				0x00000002 0x0000000a 0x00000003 0x00000003
+				0x00000002 0x00000001 0x00000003 0x00000004
+				0x00000003 0x00000009 0x0000000c 0x000004df
+				0x00000000 0x00000003 0x00000003 0x00000003
+				0x00000003 0x00000001 0x00000009 0x000000c8
+				0x00000003 0x00000009 0x00000004 0x0000000c
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0x004f0006
+				0x00000010 0x00000008 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+		emc-table@333000 {
+			reg = <333000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <333000>;
+			nvidia,emc-registers =   <0x00000014 0x00000041
+				0x0000000f 0x00000005 0x00000004 0x00000005
+				0x00000003 0x0000000a 0x00000005 0x00000005
+				0x00000004 0x00000001 0x00000003 0x00000004
+				0x00000003 0x00000009 0x0000000c 0x000009ff
+				0x00000000 0x00000003 0x00000003 0x00000005
+				0x00000005 0x00000001 0x0000000e 0x000000c8
+				0x00000003 0x00000011 0x00000006 0x0000000c
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0x00380006
+				0x00000010 0x00000008 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+	};
+
+	/* EHCI instance 1: ULPI PHY -> AX88772B (On-module) */
+	usb@c5004000 {
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet@1 {
+			compatible = "usbb95,772b";
+			reg = <1>;
+			local-mac-address = [00 00 00 00 00 00];
+		};
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio =
+			<&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+		vbus-supply = <&reg_lan_v_bus>;
+	};
+
+	clk32k_in: clock-xtal3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-760000000;
+	};
+
+	reg_lan_v_bus: regulator-lan-v-bus {
+		compatible = "regulator-fixed";
+		regulator-name = "LAN_V_BUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
+			     "nvidia,tegra-audio-wm9712";
+		nvidia,model = "Toradex Colibri T20";
+		nvidia,audio-routing =
+			"Headphone", "HPOUTL",
+			"Headphone", "HPOUTR",
+			"LineIn", "LINEINL",
+			"LineIn", "LINEINR",
+			"Mic", "MIC1";
+		nvidia,ac97-controller = <&tegra_ac97>;
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/nvidia/tegra20-cpu-opp-microvolt.dtsi
new file mode 100644
index 0000000000000..7330c1b13d933
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-cpu-opp-microvolt.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpu0_opp_table: opp-table-cpu0 {
+		opp-216000000-750 {
+			opp-microvolt = <750000 750000 1125000>;
+		};
+
+		opp-216000000-800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp-312000000-750 {
+			opp-microvolt = <750000 750000 1125000>;
+		};
+
+		opp-312000000-800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp-456000000-750 {
+			opp-microvolt = <750000 750000 1125000>;
+		};
+
+		opp-456000000-800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp-456000000-825 {
+			opp-microvolt = <825000 825000 1125000>;
+		};
+
+		opp-608000000-750 {
+			opp-microvolt = <750000 750000 1125000>;
+		};
+
+		opp-608000000-800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp-608000000-825 {
+			opp-microvolt = <825000 825000 1125000>;
+		};
+
+		opp-608000000-850 {
+			opp-microvolt = <850000 850000 1125000>;
+		};
+
+		opp-608000000-900 {
+			opp-microvolt = <900000 900000 1125000>;
+		};
+
+		opp-760000000-775 {
+			opp-microvolt = <775000 775000 1125000>;
+		};
+
+		opp-760000000-800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp-760000000-850 {
+			opp-microvolt = <850000 850000 1125000>;
+		};
+
+		opp-760000000-875 {
+			opp-microvolt = <875000 875000 1125000>;
+		};
+
+		opp-760000000-900 {
+			opp-microvolt = <900000 900000 1125000>;
+		};
+
+		opp-760000000-975 {
+			opp-microvolt = <975000 975000 1125000>;
+		};
+
+		opp-816000000-800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp-816000000-850 {
+			opp-microvolt = <850000 850000 1125000>;
+		};
+
+		opp-816000000-875 {
+			opp-microvolt = <875000 875000 1125000>;
+		};
+
+		opp-816000000-950 {
+			opp-microvolt = <950000 950000 1125000>;
+		};
+
+		opp-816000000-1000 {
+			opp-microvolt = <1000000 1000000 1125000>;
+		};
+
+		opp-912000000-850 {
+			opp-microvolt = <850000 850000 1125000>;
+		};
+
+		opp-912000000-900 {
+			opp-microvolt = <900000 900000 1125000>;
+		};
+
+		opp-912000000-925 {
+			opp-microvolt = <925000 925000 1125000>;
+		};
+
+		opp-912000000-950 {
+			opp-microvolt = <950000 950000 1125000>;
+		};
+
+		opp-912000000-1000 {
+			opp-microvolt = <1000000 1000000 1125000>;
+		};
+
+		opp-912000000-1050 {
+			opp-microvolt = <1050000 1050000 1125000>;
+		};
+
+		opp-1000000000-875 {
+			opp-microvolt = <875000 875000 1125000>;
+		};
+
+		opp-1000000000-900 {
+			opp-microvolt = <900000 900000 1125000>;
+		};
+
+		opp-1000000000-950 {
+			opp-microvolt = <950000 950000 1125000>;
+		};
+
+		opp-1000000000-975 {
+			opp-microvolt = <975000 975000 1125000>;
+		};
+
+		opp-1000000000-1000 {
+			opp-microvolt = <1000000 1000000 1125000>;
+		};
+
+		opp-1000000000-1025 {
+			opp-microvolt = <1025000 1025000 1125000>;
+		};
+
+		opp-1000000000-1100 {
+			opp-microvolt = <1100000 1100000 1125000>;
+		};
+
+		opp-1200000000-1000 {
+			opp-microvolt = <1000000 1000000 1125000>;
+		};
+
+		opp-1200000000-1050 {
+			opp-microvolt = <1050000 1050000 1125000>;
+		};
+
+		opp-1200000000-1100 {
+			opp-microvolt = <1100000 1100000 1125000>;
+		};
+
+		opp-1200000000-1125 {
+			opp-microvolt = <1125000 1125000 1125000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-cpu-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra20-cpu-opp.dtsi
new file mode 100644
index 0000000000000..47c8e78ca9581
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-cpu-opp.dtsi
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-216000000-750 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x0F 0x0003>;
+			opp-hz = /bits/ 64 <216000000>;
+			opp-suspend;
+		};
+
+		opp-216000000-800 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x0F 0x0004>;
+			opp-hz = /bits/ 64 <216000000>;
+			opp-suspend;
+		};
+
+		opp-312000000-750 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x0F 0x0003>;
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp-312000000-800 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x0F 0x0004>;
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp-456000000-750 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x0C 0x0003>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		opp-456000000-800 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0006>, <0x04 0x0004>,
+					   <0x08 0x0004>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		opp-456000000-825 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		opp-608000000-750 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0003>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp-608000000-800 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0006>, <0x08 0x0004>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp-608000000-825 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0001>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp-608000000-850 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0006>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp-608000000-900 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp-760000000-775 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0003>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp-760000000-800 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0004>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp-760000000-850 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0006>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp-760000000-875 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0001>, <0x02 0x0002>,
+					   <0x01 0x0004>, <0x02 0x0004>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp-760000000-900 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x01 0x0002>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp-760000000-975 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp-816000000-800 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0007>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp-816000000-850 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0002>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp-816000000-875 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0005>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp-816000000-950 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0006>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp-816000000-1000 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp-912000000-850 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0007>;
+			opp-hz = /bits/ 64 <912000000>;
+		};
+
+		opp-912000000-900 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0002>;
+			opp-hz = /bits/ 64 <912000000>;
+		};
+
+		opp-912000000-925 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0001>;
+			opp-hz = /bits/ 64 <912000000>;
+		};
+
+		opp-912000000-950 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x02 0x0006>, <0x01 0x0004>,
+					   <0x04 0x0004>;
+			opp-hz = /bits/ 64 <912000000>;
+		};
+
+		opp-912000000-1000 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x01 0x0002>;
+			opp-hz = /bits/ 64 <912000000>;
+		};
+
+		opp-912000000-1050 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <912000000>;
+		};
+
+		opp-1000000000-875 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0007>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp-1000000000-900 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0002>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp-1000000000-950 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0004>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp-1000000000-975 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0001>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp-1000000000-1000 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x02 0x0006>, <0x01 0x0004>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp-1000000000-1025 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x01 0x0002>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp-1000000000-1100 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp-1200000000-1000 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0004>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp-1200000000-1050 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0004>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp-1200000000-1100 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x02 0x0004>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp-1200000000-1125 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x01 0x0004>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-harmony.dts b/arch/arm/boot/dts/nvidia/tegra20-harmony.dts
new file mode 100644
index 0000000000000..11f21aeba8e99
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-harmony.dts
@@ -0,0 +1,761 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Harmony evaluation board";
+	compatible = "nvidia,harmony", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "gma",
+					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "pta", "rm", "slxa",
+					"slxk", "spia", "spib", "uac";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "sdd", "spic",
+					"spie", "spih", "uaa", "uab", "uad",
+					"uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				pci_clk_reg: ldo0 {
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	kbc@7000e200 {
+		status = "okay";
+		nvidia,debounce-delay-ms = <2>;
+		nvidia,repeat-delay-ms = <160>;
+		nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+		nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
+		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
+				MATRIX_KEY(0x00, 0x03, KEY_S)
+				MATRIX_KEY(0x00, 0x04, KEY_A)
+				MATRIX_KEY(0x00, 0x05, KEY_Z)
+				MATRIX_KEY(0x00, 0x07, KEY_FN)
+				MATRIX_KEY(0x01, 0x07, KEY_MENU)
+				MATRIX_KEY(0x02, 0x06, KEY_LEFTALT)
+				MATRIX_KEY(0x02, 0x07, KEY_RIGHTALT)
+				MATRIX_KEY(0x03, 0x00, KEY_5)
+				MATRIX_KEY(0x03, 0x01, KEY_4)
+				MATRIX_KEY(0x03, 0x02, KEY_R)
+				MATRIX_KEY(0x03, 0x03, KEY_E)
+				MATRIX_KEY(0x03, 0x04, KEY_F)
+				MATRIX_KEY(0x03, 0x05, KEY_D)
+				MATRIX_KEY(0x03, 0x06, KEY_X)
+				MATRIX_KEY(0x04, 0x00, KEY_7)
+				MATRIX_KEY(0x04, 0x01, KEY_6)
+				MATRIX_KEY(0x04, 0x02, KEY_T)
+				MATRIX_KEY(0x04, 0x03, KEY_H)
+				MATRIX_KEY(0x04, 0x04, KEY_G)
+				MATRIX_KEY(0x04, 0x05, KEY_V)
+				MATRIX_KEY(0x04, 0x06, KEY_C)
+				MATRIX_KEY(0x04, 0x07, KEY_SPACE)
+				MATRIX_KEY(0x05, 0x00, KEY_9)
+				MATRIX_KEY(0x05, 0x01, KEY_8)
+				MATRIX_KEY(0x05, 0x02, KEY_U)
+				MATRIX_KEY(0x05, 0x03, KEY_Y)
+				MATRIX_KEY(0x05, 0x04, KEY_J)
+				MATRIX_KEY(0x05, 0x05, KEY_N)
+				MATRIX_KEY(0x05, 0x06, KEY_B)
+				MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
+				MATRIX_KEY(0x06, 0x00, KEY_MINUS)
+				MATRIX_KEY(0x06, 0x01, KEY_0)
+				MATRIX_KEY(0x06, 0x02, KEY_O)
+				MATRIX_KEY(0x06, 0x03, KEY_I)
+				MATRIX_KEY(0x06, 0x04, KEY_L)
+				MATRIX_KEY(0x06, 0x05, KEY_K)
+				MATRIX_KEY(0x06, 0x06, KEY_COMMA)
+				MATRIX_KEY(0x06, 0x07, KEY_M)
+				MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
+				MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
+				MATRIX_KEY(0x07, 0x03, KEY_ENTER)
+				MATRIX_KEY(0x07, 0x07, KEY_MENU)
+				MATRIX_KEY(0x08, 0x04, KEY_LEFTSHIFT)
+				MATRIX_KEY(0x08, 0x05, KEY_RIGHTSHIFT)
+				MATRIX_KEY(0x09, 0x05, KEY_LEFTCTRL)
+				MATRIX_KEY(0x09, 0x07, KEY_RIGHTCTRL)
+				MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
+				MATRIX_KEY(0x0B, 0x01, KEY_P)
+				MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
+				MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
+				MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
+				MATRIX_KEY(0x0B, 0x05, KEY_DOT)
+				MATRIX_KEY(0x0C, 0x00, KEY_F10)
+				MATRIX_KEY(0x0C, 0x01, KEY_F9)
+				MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
+				MATRIX_KEY(0x0C, 0x03, KEY_3)
+				MATRIX_KEY(0x0C, 0x04, KEY_2)
+				MATRIX_KEY(0x0C, 0x05, KEY_UP)
+				MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
+				MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
+				MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
+				MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
+				MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
+				MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
+				MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
+				MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
+				MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
+				MATRIX_KEY(0x0E, 0x00, KEY_F11)
+				MATRIX_KEY(0x0E, 0x01, KEY_F12)
+				MATRIX_KEY(0x0E, 0x02, KEY_F8)
+				MATRIX_KEY(0x0E, 0x03, KEY_Q)
+				MATRIX_KEY(0x0E, 0x04, KEY_F4)
+				MATRIX_KEY(0x0E, 0x05, KEY_F3)
+				MATRIX_KEY(0x0E, 0x06, KEY_1)
+				MATRIX_KEY(0x0E, 0x07, KEY_F7)
+				MATRIX_KEY(0x0F, 0x00, KEY_ESC)
+				MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
+				MATRIX_KEY(0x0F, 0x02, KEY_F5)
+				MATRIX_KEY(0x0F, 0x03, KEY_TAB)
+				MATRIX_KEY(0x0F, 0x04, KEY_F1)
+				MATRIX_KEY(0x0F, 0x05, KEY_F2)
+				MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
+				MATRIX_KEY(0x0F, 0x07, KEY_F6)
+				MATRIX_KEY(0x14, 0x00, KEY_KP7)
+				MATRIX_KEY(0x15, 0x00, KEY_KP9)
+				MATRIX_KEY(0x15, 0x01, KEY_KP8)
+				MATRIX_KEY(0x15, 0x02, KEY_KP4)
+				MATRIX_KEY(0x15, 0x04, KEY_KP1)
+				MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
+				MATRIX_KEY(0x16, 0x02, KEY_KP6)
+				MATRIX_KEY(0x16, 0x03, KEY_KP5)
+				MATRIX_KEY(0x16, 0x04, KEY_KP3)
+				MATRIX_KEY(0x16, 0x05, KEY_KP2)
+				MATRIX_KEY(0x16, 0x07, KEY_KP0)
+				MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
+				MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
+				MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
+				MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
+				MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
+				MATRIX_KEY(0x1D, 0x03, KEY_HOME)
+				MATRIX_KEY(0x1D, 0x04, KEY_END)
+				MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSUP)
+				MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
+				MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSDOWN)
+				MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
+				MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
+				MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
+				MATRIX_KEY(0x1F, 0x04, KEY_QUESTION)>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	pcie@80003000 {
+		status = "okay";
+
+		avdd-pex-supply = <&pci_vdd_reg>;
+		vdd-pex-supply = <&pci_vdd_reg>;
+		avdd-pex-pll-supply = <&pci_vdd_reg>;
+		avdd-plle-supply = <&pci_vdd_reg>;
+		vddio-pex-clk-supply = <&pci_clk_reg>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	mmc@c8000200 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	mmc@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <8>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "auo,b101aw03";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	vdd_5v0_reg: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	pci_vdd_reg: regulator-1v05 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v05";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_pnl_reg: regulator-pn1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_bl_reg: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_5v0_hdmi: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-harmony",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Harmony";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_LOW>;
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
+			GPIO_ACTIVE_HIGH>;
+		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-medcom-wide.dts b/arch/arm/boot/dts/nvidia/tegra20-medcom-wide.dts
new file mode 100644
index 0000000000000..8c657182fff32
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-medcom-wide.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Medcom-Wide board";
+	compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
+
+	aliases {
+		serial0 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		/* close enough */
+		power-supply = <&vdd_3v3_reg>;
+	};
+
+	panel: panel {
+		compatible = "innolux,n156bge-l21";
+
+		power-supply =  <&vdd_1v8_reg>; // <&vdd_3v3_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-wm8903-medcom-wide",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design Medcom-Wide";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	vcc_24v_reg: regulator-24v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_24v";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+	};
+
+	vdd_5v0_reg: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_reg: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_reg: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8";
+		vin-supply = <&vdd_3v3_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-paz00.dts b/arch/arm/boot/dts/nvidia/tegra20-paz00.dts
new file mode 100644
index 0000000000000..e995f428dc2ea
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-paz00.dts
@@ -0,0 +1,721 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "Toshiba AC100 / Dynabook AZ";
+	compatible = "compal,paz00", "nvidia,tegra20";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* MicroSD */
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata", "atc", "atd", "ate",
+					"dap2", "gmb", "gmc", "gmd", "spia",
+					"spib", "spic", "spid", "spie";
+				nvidia,function = "gmi";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "pllc_out1";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gpu {
+				nvidia,pins = "gpu", "sdb", "sdd";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			kbcb {
+				nvidia,pins = "kbcb", "kbcd";
+				nvidia,function = "sdio2";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc";
+				nvidia,function = "owr";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdc {
+				nvidia,pins = "sdc";
+				nvidia,function = "twc";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spi4";
+			};
+			spdi {
+				nvidia,pins = "spdi", "spdo";
+				nvidia,function = "rsvd2";
+			};
+			spif {
+				nvidia,pins = "spif", "uac";
+				nvidia,function = "rsvd4";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "spdif";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dap2", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme",
+					"gpu", "gpu7", "gpv", "i2cp", "pta",
+					"rm", "sdio1", "slxk", "spdo", "uac",
+					"uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap3", "dap4", "dtb",
+					"dtc", "dte", "slxa", "slxc", "slxd",
+					"spdi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spia", "spib", "spid",
+					"spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "irrx", "irtx", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"spic", "spig", "uaa", "uab";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd",
+					"spie", "spih", "uad", "uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhs", "lsc0", "lspi",
+					"lvs", "pmc";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_lcsn {
+				nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2",
+					"lm0", "lm1", "lpp", "lpw0", "lpw1",
+					"lpw2", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "lvp1", "sdb";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+		};
+	};
+
+	spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	i2s@70002800 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	serial@70006200 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lvds_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		alc5632: alc5632@1e {
+			compatible = "realtek,alc5632";
+			reg = <0x1e>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	nvec@7000c500 {
+		compatible = "nvidia,nvec";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <80000>;
+		request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		slave-addr = <138>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&p5valw_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				core_vdd_reg: sm0 {
+					regulator-name = "+1.2vs_sm0,vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd_reg &cpu_vdd_reg>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				cpu_vdd_reg: sm1 {
+					regulator-name = "+1.0vs_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-coupled-with = <&core_vdd_reg &rtc_vdd_reg>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "+3.7vs_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "+1.1vs_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				rtc_vdd_reg: ldo2 {
+					regulator-name = "+1.2vs_ldo2,vdd_rtc";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&core_vdd_reg &cpu_vdd_reg>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "+3.3vs_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "+2.85vs_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					/*
+					 * Research indicates this should be
+					 * 1.8v; other boards that use this
+					 * rail for the same purpose need it
+					 * set to 1.8v. The schematic signal
+					 * name is incorrect; perhaps copied
+					 * from an incorrect NVIDIA reference.
+					 */
+					regulator-name = "+2.85vs_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "+3.3vs_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "+3.3vs_rtc";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		adt7461: temperature-sensor@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&core_vdd_reg>;
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@0 {
+			nvidia,ram-code = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			emc-table@166500 {
+				reg = <166500>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <166500>;
+				nvidia,emc-registers = <0x0000000a 0x00000016
+					0x00000008 0x00000003 0x00000004 0x00000004
+					0x00000002 0x0000000c 0x00000003 0x00000003
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x000004df
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000003 0x00000001 0x0000000a 0x000000c8
+					0x00000003 0x00000006 0x00000004 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xe03b0323
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@333000 {
+				reg = <333000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <333000>;
+				nvidia,emc-registers = <0x00000018 0x00000033
+					0x00000012 0x00000004 0x00000004 0x00000005
+					0x00000003 0x0000000c 0x00000006 0x00000006
+					0x00000003 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x00000bff
+					0x00000000 0x00000003 0x00000003 0x00000006
+					0x00000006 0x00000001 0x00000011 0x000000c8
+					0x00000003 0x0000000e 0x00000007 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xf0440303
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+	};
+
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+		default-brightness-level = <10>;
+
+		/* close enough */
+		power-supply = <&vdd_pnl_reg>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&cpu_vdd_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&cpu_vdd_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			label = "Wakeup";
+			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "wifi-led";
+			gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "rfkill0";
+		};
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-760000000;
+	};
+
+	panel: panel {
+		compatible = "samsung,ltn101nt05";
+
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(M, 6) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	p5valw_reg: regulator-5v0alw {
+		compatible = "regulator-fixed";
+		regulator-name = "+5valw";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_pnl_reg: regulator-3v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3VS,vdd_pnl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-alc5632-paz00",
+			"nvidia,tegra-audio-alc5632";
+
+		nvidia,model = "Compal PAZ00";
+
+		nvidia,audio-routing =
+			"Int Spk", "SPKOUT",
+			"Int Spk", "SPKOUTN",
+			"Headset Mic", "MICBIAS1",
+			"MIC1", "Headset Mic",
+			"Headset Stereophone", "HPR",
+			"Headset Stereophone", "HPL",
+			"DMICDAT", "Digital Mic";
+
+		nvidia,audio-codec = <&alc5632>;
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <500>; /* milliseconds */
+			polling-delay = <1500>; /* milliseconds */
+
+			thermal-sensors = <&adt7461 1>;
+
+			trips {
+				trip0: cpu-alert0 {
+					/* start throttling at 80C */
+					temperature = <80000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: cpu-crit {
+					/* shut down at 85C */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-peripherals-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra20-peripherals-opp.dtsi
new file mode 100644
index 0000000000000..1b808233a9339
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-peripherals-opp.dtsi
@@ -0,0 +1,1022 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	core_opp_table: opp-table-core {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		core_opp_950: opp-950000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-level = <950000>;
+		};
+
+		core_opp_1000: opp-1000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-level = <1000000>;
+		};
+
+		core_opp_1100: opp-1100000 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-level = <1100000>;
+		};
+
+		core_opp_1200: opp-1200000 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-level = <1200000>;
+		};
+
+		core_opp_1225: opp-1225000 {
+			opp-microvolt = <1225000 1225000 1300000>;
+			opp-level = <1225000>;
+		};
+
+		core_opp_1275: opp-1275000 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-level = <1275000>;
+		};
+
+		core_opp_1300: opp-1300000 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-level = <1300000>;
+		};
+	};
+
+	emc_icc_dvfs_opp_table: opp-table-emc {
+		compatible = "operating-points-v2";
+
+		opp-36000000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <36000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-47500000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <47500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-50000000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <50000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-54000000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <54000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-57000000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <57000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-100000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-108000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <108000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-126666000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <126666000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-150000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <150000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-216000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <216000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+			opp-suspend;
+		};
+
+		opp-300000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-333000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <333000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-380000000 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-600000000 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-666000000 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <666000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-760000000 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <760000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1300>;
+		};
+	};
+
+	host1x_dvfs_opp_table: opp-table-host1x {
+		compatible = "operating-points-v2";
+
+		opp-104500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <104500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-133000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-166000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <166000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	mpe_dvfs_opp_table: opp-table-mpe {
+		compatible = "operating-points-v2";
+
+		opp-104500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <104500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-142500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <142500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-152000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-228000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <228000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-228000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <228000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-237500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <237500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-266000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <266000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-275500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <275500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	vi_dvfs_opp_table: opp-table-vi {
+		compatible = "operating-points-v2";
+
+		opp-85000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <85000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-100000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-150000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <150000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	epp_dvfs_opp_table: opp-table-epp {
+		compatible = "operating-points-v2";
+
+		opp-133000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-171000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	gr2d_dvfs_opp_table: opp-table-gr2d {
+		compatible = "operating-points-v2";
+
+		opp-133000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-171000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	gr3d_dvfs_opp_table: opp-table-gr3d {
+		compatible = "operating-points-v2";
+
+		opp-114000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <114000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-161500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <161500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-161500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <161500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-209000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <209000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-218500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <218500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-247000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-247000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-256500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <256500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-285000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-304000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-323000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <323000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-333500000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-333500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-351500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <351500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-380000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-400000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-400000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	disp1_dvfs_opp_table: opp-table-disp1 {
+		compatible = "operating-points-v2";
+
+		opp-158000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <158000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-190000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	disp2_dvfs_opp_table: opp-table-disp2 {
+		compatible = "operating-points-v2";
+
+		opp-158000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <158000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-190000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	dsi_dvfs_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-100000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-500000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	hdmi_dvfs_opp_table: opp-table-hdmi {
+		compatible = "operating-points-v2";
+
+		opp-148500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <148500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	tvo_dvfs_opp_table: opp-table-tvo {
+		compatible = "operating-points-v2";
+
+		opp-250000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <250000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sclk_dvfs_opp_table: opp-table-sclk {
+		compatible = "operating-points-v2";
+
+		opp-95000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <95000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-123500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <123500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-133000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-152000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-159500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <159500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-171000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-180500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <180500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-207000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <207000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-218500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <218500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-222500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <222500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-229500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <229500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-240000000-1225 {
+			opp-microvolt = <1225000 1225000 1300000>;
+			opp-hz = /bits/ 64 <240000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1225>;
+		};
+
+		opp-240000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <240000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-247000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-256500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <256500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-260000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <260000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-262000000-1300 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <262000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-264000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-277500000-1300 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <277500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-285000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-292500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <292500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1300 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-300000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1275>;
+		};
+	};
+
+	vde_dvfs_opp_table: opp-table-vde {
+		compatible = "operating-points-v2";
+
+		opp-95000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <95000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-123500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <123500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-123500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <123500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-152000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-152000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-171000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-209000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <209000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-209000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <209000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-218500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <218500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-237500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <237500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-275500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <275500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-285000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	ndflash_dvfs_opp_table: opp-table-ndflash {
+		compatible = "operating-points-v2";
+
+		opp-130000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <130000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-150000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <150000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-158000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <158000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-164000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <164000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	nor_dvfs_opp_table: opp-table-nor {
+		compatible = "operating-points-v2";
+
+		opp-92000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <92000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc1_dvfs_opp_table: opp-table-sdmmc1 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc2_dvfs_opp_table: opp-table-sdmmc2 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc3_dvfs_opp_table: opp-table-sdmmc3 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc4_dvfs_opp_table: opp-table-sdmmc4 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	pcie_dvfs_opp_table: opp-table-pcie {
+		compatible = "operating-points-v2";
+
+		opp-250000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <250000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	usbd_dvfs_opp_table: opp-table-usbd {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	usb2_dvfs_opp_table: opp-table-usb2 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	usb3_dvfs_opp_table: opp-table-usb3 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-plutux.dts b/arch/arm/boot/dts/nvidia/tegra20-plutux.dts
new file mode 100644
index 0000000000000..71a8236491dff
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-plutux.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Plutux board";
+	compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-plutux",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design Plutux";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	vcc_24v_reg: regulator-24v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_24v";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+	};
+
+	vdd_5v0_reg: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_reg: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_reg: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8";
+		vin-supply = <&vdd_3v3_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-seaboard.dts b/arch/arm/boot/dts/nvidia/tegra20-seaboard.dts
new file mode 100644
index 0000000000000..bd4ff8b40b208
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-seaboard.dts
@@ -0,0 +1,920 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Seaboard";
+	compatible = "nvidia,seaboard", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp", "lm1";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "lpw0", "lpw2", "lsc1",
+					"lsck", "lsda";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lsc0",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap2",
+					"dap4", "ddc", "dtf", "gma", "gmc", "gmd",
+					"gme", "gpu", "gpu7", "i2cp", "irrx",
+					"irtx", "pta", "rm", "sdc", "sdd",
+					"slxd", "slxk", "spdi", "spdo", "uac",
+					"uad", "uca", "ucb", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ate {
+				nvidia,pins = "ate", "csus", "dap3",
+					"gpv", "owc", "slxc", "spib", "spid",
+					"spie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "gmb", "slxa", "spia",
+					"spig", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dte {
+				nvidia,pins = "dte", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "spic", "uaa",
+					"uab";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_idle: pinmux-i2cmux-idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux-i2cmux-pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		/* ALS and proximity sensor */
+		isl29018@44 {
+			compatible = "isil,isl29018";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gyrometer@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		magnetometer@c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0xc>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1125000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	kbc@7000e200 {
+		status = "okay";
+		nvidia,debounce-delay-ms = <32>;
+		nvidia,repeat-delay-ms = <160>;
+		nvidia,ghost-filter;
+		nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+		nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
+		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
+				MATRIX_KEY(0x00, 0x03, KEY_S)
+				MATRIX_KEY(0x00, 0x04, KEY_A)
+				MATRIX_KEY(0x00, 0x05, KEY_Z)
+				MATRIX_KEY(0x00, 0x07, KEY_FN)
+
+				MATRIX_KEY(0x01, 0x07, KEY_LEFTMETA)
+				MATRIX_KEY(0x02, 0x06, KEY_RIGHTALT)
+				MATRIX_KEY(0x02, 0x07, KEY_LEFTALT)
+
+				MATRIX_KEY(0x03, 0x00, KEY_5)
+				MATRIX_KEY(0x03, 0x01, KEY_4)
+				MATRIX_KEY(0x03, 0x02, KEY_R)
+				MATRIX_KEY(0x03, 0x03, KEY_E)
+				MATRIX_KEY(0x03, 0x04, KEY_F)
+				MATRIX_KEY(0x03, 0x05, KEY_D)
+				MATRIX_KEY(0x03, 0x06, KEY_X)
+
+				MATRIX_KEY(0x04, 0x00, KEY_7)
+				MATRIX_KEY(0x04, 0x01, KEY_6)
+				MATRIX_KEY(0x04, 0x02, KEY_T)
+				MATRIX_KEY(0x04, 0x03, KEY_H)
+				MATRIX_KEY(0x04, 0x04, KEY_G)
+				MATRIX_KEY(0x04, 0x05, KEY_V)
+				MATRIX_KEY(0x04, 0x06, KEY_C)
+				MATRIX_KEY(0x04, 0x07, KEY_SPACE)
+
+				MATRIX_KEY(0x05, 0x00, KEY_9)
+				MATRIX_KEY(0x05, 0x01, KEY_8)
+				MATRIX_KEY(0x05, 0x02, KEY_U)
+				MATRIX_KEY(0x05, 0x03, KEY_Y)
+				MATRIX_KEY(0x05, 0x04, KEY_J)
+				MATRIX_KEY(0x05, 0x05, KEY_N)
+				MATRIX_KEY(0x05, 0x06, KEY_B)
+				MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
+
+				MATRIX_KEY(0x06, 0x00, KEY_MINUS)
+				MATRIX_KEY(0x06, 0x01, KEY_0)
+				MATRIX_KEY(0x06, 0x02, KEY_O)
+				MATRIX_KEY(0x06, 0x03, KEY_I)
+				MATRIX_KEY(0x06, 0x04, KEY_L)
+				MATRIX_KEY(0x06, 0x05, KEY_K)
+				MATRIX_KEY(0x06, 0x06, KEY_COMMA)
+				MATRIX_KEY(0x06, 0x07, KEY_M)
+
+				MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
+				MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
+				MATRIX_KEY(0x07, 0x03, KEY_ENTER)
+				MATRIX_KEY(0x07, 0x07, KEY_MENU)
+
+				MATRIX_KEY(0x08, 0x04, KEY_RIGHTSHIFT)
+				MATRIX_KEY(0x08, 0x05, KEY_LEFTSHIFT)
+
+				MATRIX_KEY(0x09, 0x05, KEY_RIGHTCTRL)
+				MATRIX_KEY(0x09, 0x07, KEY_LEFTCTRL)
+
+				MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
+				MATRIX_KEY(0x0B, 0x01, KEY_P)
+				MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
+				MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
+				MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
+				MATRIX_KEY(0x0B, 0x05, KEY_DOT)
+
+				MATRIX_KEY(0x0C, 0x00, KEY_F10)
+				MATRIX_KEY(0x0C, 0x01, KEY_F9)
+				MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
+				MATRIX_KEY(0x0C, 0x03, KEY_3)
+				MATRIX_KEY(0x0C, 0x04, KEY_2)
+				MATRIX_KEY(0x0C, 0x05, KEY_UP)
+				MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
+				MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
+
+				MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
+				MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
+				MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
+				MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
+				MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
+				MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
+				MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
+
+				MATRIX_KEY(0x0E, 0x00, KEY_F11)
+				MATRIX_KEY(0x0E, 0x01, KEY_F12)
+				MATRIX_KEY(0x0E, 0x02, KEY_F8)
+				MATRIX_KEY(0x0E, 0x03, KEY_Q)
+				MATRIX_KEY(0x0E, 0x04, KEY_F4)
+				MATRIX_KEY(0x0E, 0x05, KEY_F3)
+				MATRIX_KEY(0x0E, 0x06, KEY_1)
+				MATRIX_KEY(0x0E, 0x07, KEY_F7)
+
+				MATRIX_KEY(0x0F, 0x00, KEY_ESC)
+				MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
+				MATRIX_KEY(0x0F, 0x02, KEY_F5)
+				MATRIX_KEY(0x0F, 0x03, KEY_TAB)
+				MATRIX_KEY(0x0F, 0x04, KEY_F1)
+				MATRIX_KEY(0x0F, 0x05, KEY_F2)
+				MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
+				MATRIX_KEY(0x0F, 0x07, KEY_F6)
+
+				/* Software Handled Function Keys */
+				MATRIX_KEY(0x14, 0x00, KEY_KP7)
+
+				MATRIX_KEY(0x15, 0x00, KEY_KP9)
+				MATRIX_KEY(0x15, 0x01, KEY_KP8)
+				MATRIX_KEY(0x15, 0x02, KEY_KP4)
+				MATRIX_KEY(0x15, 0x04, KEY_KP1)
+
+				MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
+				MATRIX_KEY(0x16, 0x02, KEY_KP6)
+				MATRIX_KEY(0x16, 0x03, KEY_KP5)
+				MATRIX_KEY(0x16, 0x04, KEY_KP3)
+				MATRIX_KEY(0x16, 0x05, KEY_KP2)
+				MATRIX_KEY(0x16, 0x07, KEY_KP0)
+
+				MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
+				MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
+				MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
+				MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
+
+				MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
+
+				MATRIX_KEY(0x1D, 0x03, KEY_HOME)
+				MATRIX_KEY(0x1D, 0x04, KEY_END)
+				MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSDOWN)
+				MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
+				MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSUP)
+
+				MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
+				MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
+				MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
+
+				MATRIX_KEY(0x1F, 0x04, KEY_HELP)>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	memory-controller@7000f400 {
+		emc-table@190000 {
+			reg = <190000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <190000>;
+			nvidia,emc-registers = <0x0000000c 0x00000026
+				0x00000009 0x00000003 0x00000004 0x00000004
+				0x00000002 0x0000000c 0x00000003 0x00000003
+				0x00000002 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x0000059f
+				0x00000000 0x00000003 0x00000003 0x00000003
+				0x00000003 0x00000001 0x0000000b 0x000000c8
+				0x00000003 0x00000007 0x00000004 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xa06204ae
+				0x007dc010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+
+		emc-table@380000 {
+			reg = <380000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <380000>;
+			nvidia,emc-registers = <0x00000017 0x0000004b
+				0x00000012 0x00000006 0x00000004 0x00000005
+				0x00000003 0x0000000c 0x00000006 0x00000006
+				0x00000003 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x00000b5f
+				0x00000000 0x00000003 0x00000003 0x00000006
+				0x00000006 0x00000001 0x00000011 0x000000c8
+				0x00000003 0x0000000e 0x00000007 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xe044048b
+				0x007d8010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+	};
+
+	usb@c5000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&vbus_reg>;
+		dr_mode = "otg";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	mmc@c8000000 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	mmc@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 2 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		switch-lid {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+			};
+		};
+	};
+
+	panel: panel {
+		compatible = "chunghwa,claa101wa01a";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+	};
+
+	vdd_5v0_reg: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_reg: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus_wup1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_pnl_reg: regulator-pnl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_bl_reg: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_hdmi: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-seaboard",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Seaboard";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1R", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-tamonten.dtsi b/arch/arm/boot/dts/nvidia/tegra20-tamonten.dtsi
new file mode 100644
index 0000000000000..ddb84e4a9f8b6
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-tamonten.dtsi
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra20.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten SOM";
+	compatible = "ad,tamonten", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "irrx", "irtx", "pta",
+					"rm", "slxa", "slxk", "spia", "spib",
+					"uac";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc", "uad", "uca";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_sdd {
+				nvidia,pins = "sdd", "spic", "spie", "spih",
+					"uaa", "uab", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_idle: pinmux-i2cmux-idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux-i2cmux-pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <100000>;
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			/* vdd_5v0_reg must be provided by the base board */
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sys_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sys_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sys_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				pci_clk_reg: ldo0 {
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	pcie@80003000 {
+		avdd-pex-supply = <&pci_vdd_reg>;
+		vdd-pex-supply = <&pci_vdd_reg>;
+		avdd-pex-pll-supply = <&pci_vdd_reg>;
+		avdd-plle-supply = <&pci_vdd_reg>;
+		vddio-pex-clk-supply = <&pci_clk_reg>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	mmc@c8000600 {
+		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	pci_vdd_reg: regulator-1v05 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v05";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&pmic 2 0>;
+		enable-active-high;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-tec.dts b/arch/arm/boot/dts/nvidia/tegra20-tec.dts
new file mode 100644
index 0000000000000..4f41c74384b2c
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-tec.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten Evaluation Carrier";
+	compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	pcie@80003000 {
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-wm8903-tec",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design TEC";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	vcc_24v_reg: regulator-24v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_24v";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+	};
+
+	vdd_5v0_reg: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_reg: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_reg: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8";
+		vin-supply = <&vdd_3v3_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts b/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts
new file mode 100644
index 0000000000000..1944121e2dd6b
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts
@@ -0,0 +1,475 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+
+/ {
+	model = "Compulab TrimSlice board";
+	compatible = "compulab,trimslice", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000c500/rtc@56";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc", "gmb";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gme", "pta";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc", "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "uarta";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "sdio3";
+			};
+			spdi {
+				nvidia,pins = "spdi", "spdo";
+				nvidia,function = "spdif";
+			};
+			spia {
+				nvidia,pins = "spia", "spib", "spic";
+				nvidia,function = "spi2";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atc", "atd", "ate",
+					"crtp", "dap2", "dap3", "dap4", "dta",
+					"dtb", "dtc", "dtd", "dte", "gmb",
+					"gme", "i2cp", "pta", "slxc", "slxd",
+					"spdi", "spdo", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_atb {
+				nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
+					"gma", "gmc", "gmd", "gpu", "gpu7",
+					"gpv", "sdio1", "slxa", "slxk", "uac";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spia", "spib",
+					"spid", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dtf", "rm", "sdc", "sdd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "pmc";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "kbca", "kbcb",
+					"kbcc", "kbcd", "kbce", "kbcf", "owc",
+					"spic", "spie", "spig", "spih", "uaa",
+					"uab", "uad", "uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+			conf_spif {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	dvi_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	spi@7000c380 {
+		status = "okay";
+		spi-max-frequency = <48000000>;
+
+		flash@0 {
+			compatible = "winbond,w25q80bl", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <48000000>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		codec: codec@1a {
+			compatible = "ti,tlv320aic23";
+			reg = <0x1a>;
+		};
+
+		rtc@56 {
+			compatible = "emmicro,em3027";
+			reg = <0x56>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	pcie@80003000 {
+		status = "okay";
+
+		avdd-pex-supply = <&pci_vdd_reg>;
+		vdd-pex-supply = <&pci_vdd_reg>;
+		avdd-pex-pll-supply = <&pci_vdd_reg>;
+		avdd-plle-supply = <&pci_vdd_reg>;
+		vddio-pex-clk-supply = <&pci_clk_reg>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&vbus_reg>;
+	};
+
+	usb@c5004000 {
+		status = "okay";
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	mmc@c8000000 {
+		status = "okay";
+		broken-cd;
+		bus-width = <4>;
+	};
+
+	mmc@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi_vdd_reg: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_hdmi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	hdmi_pll_reg: regulator-hdmipll {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_hdmi_pll";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vbus_reg: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pci_clk_reg: regulator-pciclk {
+		compatible = "regulator-fixed";
+		regulator-name = "pci_clk";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	pci_vdd_reg: regulator-pcivdd {
+		compatible = "regulator-fixed";
+		regulator-name = "pci_vdd";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-always-on;
+	};
+
+	vdd_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-trimslice";
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&codec>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-ventana.dts b/arch/arm/boot/dts/nvidia/tegra20-ventana.dts
new file mode 100644
index 0000000000000..433575a6ad38f
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-ventana.dts
@@ -0,0 +1,755 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Ventana evaluation board";
+	compatible = "nvidia,ventana", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp", "lm1";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
+					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap2",
+					"dap4", "ddc", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "i2cp", "irrx",
+					"irtx", "pta", "rm", "sdc", "sdd",
+					"slxc", "slxd", "slxk", "spdi", "spdo",
+					"uac", "uad", "uca", "ucb", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ate {
+				nvidia,pins = "ate", "csus", "dap3", "gmd",
+					"gpv", "owc", "spia", "spib", "spic",
+					"spid", "spie", "spig";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "gmb", "slxa", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dte {
+				nvidia,pins = "dte", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa", "uab";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_idle: pinmux-i2cmux-idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux-i2cmux-pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		/* ALS and proximity sensor */
+		isl29018@44 {
+			compatible = "isil,isl29018";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_cpu: sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				rtc_vdd: ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	mmc@c8000000 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	mmc@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 2 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	panel: panel {
+		compatible = "chunghwa,claa101wa01a";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+	};
+
+	vdd_5v0_reg: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_pnl_reg: regulator-pnl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_bl_reg: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-ventana",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Ventana";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
+			GPIO_ACTIVE_HIGH>;
+		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip0: cpu-alert0 {
+					/* start throttling at 50C */
+					temperature = <50000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: cpu-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20.dtsi b/arch/arm/boot/dts/nvidia/tegra20.dtsi
new file mode 100644
index 0000000000000..4177d04265d83
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20.dtsi
@@ -0,0 +1,1061 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra20-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra20-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/tegra-pmc.h>
+
+#include "tegra20-peripherals-opp.dtsi"
+
+/ {
+	compatible = "nvidia,tegra20";
+	interrupt-parent = <&lic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	sram@40000000 {
+		compatible = "mmio-sram";
+		reg = <0x40000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000>;
+
+		vde_pool: sram@400 {
+			reg = <0x400 0x3fc00>;
+			pool;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra20-host1x";
+		reg = <0x50000000 0x00024000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA20_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&host1x_dvfs_opp_table>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x04000000>;
+
+		mpe@54040000 {
+			compatible = "nvidia,tegra20-mpe";
+			reg = <0x54040000 0x00040000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_MPE>;
+			resets = <&tegra_car 60>;
+			reset-names = "mpe";
+			power-domains = <&pd_mpe>;
+			operating-points-v2 = <&mpe_dvfs_opp_table>;
+			status = "disabled";
+		};
+
+		vi@54080000 {
+			compatible = "nvidia,tegra20-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_VI>;
+			resets = <&tegra_car 20>;
+			reset-names = "vi";
+			power-domains = <&pd_venc>;
+			operating-points-v2 = <&vi_dvfs_opp_table>;
+			status = "disabled";
+		};
+
+		epp@540c0000 {
+			compatible = "nvidia,tegra20-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_EPP>;
+			resets = <&tegra_car 19>;
+			reset-names = "epp";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&epp_dvfs_opp_table>;
+			status = "disabled";
+		};
+
+		isp@54100000 {
+			compatible = "nvidia,tegra20-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_ISP>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
+			power-domains = <&pd_venc>;
+			status = "disabled";
+		};
+
+		gr2d@54140000 {
+			compatible = "nvidia,tegra20-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+			resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+			reset-names = "2d", "mc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&gr2d_dvfs_opp_table>;
+		};
+
+		gr3d@54180000 {
+			compatible = "nvidia,tegra20-gr3d";
+			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+			resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+			reset-names = "3d", "mc";
+			power-domains = <&pd_3d>;
+			operating-points-v2 = <&gr3d_dvfs_opp_table>;
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp1_dvfs_opp_table>;
+
+			nvidia,head = <0>;
+
+			interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>,
+					<&mc TEGRA20_MC_DISPLAY0B &emc>,
+					<&mc TEGRA20_MC_DISPLAY1B &emc>,
+					<&mc TEGRA20_MC_DISPLAY0C &emc>,
+					<&mc TEGRA20_MC_DISPLAYHC &emc>;
+			interconnect-names = "wina",
+					     "winb",
+					     "winb-vfilter",
+					     "winc",
+					     "cursor";
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp2_dvfs_opp_table>;
+
+			nvidia,head = <1>;
+
+			interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>,
+					<&mc TEGRA20_MC_DISPLAY0BB &emc>,
+					<&mc TEGRA20_MC_DISPLAY1BB &emc>,
+					<&mc TEGRA20_MC_DISPLAY0CB &emc>,
+					<&mc TEGRA20_MC_DISPLAYHCB &emc>;
+			interconnect-names = "wina",
+					     "winb",
+					     "winb-vfilter",
+					     "winc",
+					     "cursor";
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		tegra_hdmi: hdmi@54280000 {
+			compatible = "nvidia,tegra20-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&hdmi_dvfs_opp_table>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		tvo@542c0000 {
+			compatible = "nvidia,tegra20-tvo";
+			reg = <0x542c0000 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_TVO>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&tvo_dvfs_opp_table>;
+			status = "disabled";
+		};
+
+		dsi@54300000 {
+			compatible = "nvidia,tegra20-dsi";
+			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_DSI>,
+				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&dsi_dvfs_opp_table>;
+			status = "disabled";
+		};
+	};
+
+	timer@50040600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		interrupt-parent = <&intc>;
+		reg = <0x50040600 0x20>;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&tegra_car TEGRA20_CLK_TWD>;
+	};
+
+	intc: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a9-gic";
+		reg = <0x50041000 0x1000>,
+		      <0x50040100 0x0100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};
+
+	cache-controller@50043000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x50043000 0x1000>;
+		arm,data-latency = <5 5 2>;
+		arm,tag-latency = <4 4 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra20-ictlr";
+		reg = <0x60004000 0x100>,
+		      <0x60004100 0x50>,
+		      <0x60004200 0x50>,
+		      <0x60004300 0x50>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra20-timer";
+		reg = <0x60005000 0x60>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra20-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+
+		sclk {
+			compatible = "nvidia,tegra20-sclk";
+			clocks = <&tegra_car TEGRA20_CLK_SCLK>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&sclk_dvfs_opp_table>;
+		};
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra20-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
+
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra20-apbdma";
+		reg = <0x6000a000 0x1200>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	ahb@6000c000 {
+		compatible = "nvidia,tegra20-ahb";
+		reg = <0x6000c000 0x110>; /* AHB Arbitration + Gizmo Controller */
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra20-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		gpio-ranges = <&pinmux 0 0 224>;
+	};
+
+	vde@6001a000 {
+		compatible = "nvidia,tegra20-vde";
+		reg = <0x6001a000 0x1000>, /* Syntax Engine */
+		      <0x6001b000 0x1000>, /* Video Bitstream Engine */
+		      <0x6001c000  0x100>, /* Macroblock Engine */
+		      <0x6001c200  0x100>, /* Post-processing Engine */
+		      <0x6001c400  0x100>, /* Motion Compensation Engine */
+		      <0x6001c600  0x100>, /* Transform Engine */
+		      <0x6001c800  0x100>, /* Pixel prediction block */
+		      <0x6001ca00  0x100>, /* Video DMA */
+		      <0x6001d800  0x300>; /* Video frame controls */
+		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+			    "tfe", "ppb", "vdma", "frameid";
+		iram = <&vde_pool>; /* IRAM region */
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
+		interrupt-names = "sync-token", "bsev", "sxe";
+		clocks = <&tegra_car TEGRA20_CLK_VDE>;
+		reset-names = "vde", "mc";
+		resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>;
+		power-domains = <&pd_vde>;
+		operating-points-v2 = <&vde_dvfs_opp_table>;
+	};
+
+	pinmux: pinmux@70000014 {
+		compatible = "nvidia,tegra20-pinmux";
+		reg = <0x70000014 0x10>, /* Tri-state registers */
+		      <0x70000080 0x20>, /* Mux registers */
+		      <0x700000a0 0x14>, /* Pull-up/down registers */
+		      <0x70000868 0xa8>; /* Pad control registers */
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64>, /* Chip revision */
+		      <0x70000008 0x04>; /* Strapping options */
+	};
+
+	das@70000c00 {
+		compatible = "nvidia,tegra20-das";
+		reg = <0x70000c00 0x80>;
+	};
+
+	tegra_ac97: ac97@70002000 {
+		compatible = "nvidia,tegra20-ac97";
+		reg = <0x70002000 0x200>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_AC97>;
+		resets = <&tegra_car 3>;
+		reset-names = "ac97";
+		dmas = <&apbdma 12>, <&apbdma 12>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	tegra_spdif: spdif@70002400 {
+		compatible = "nvidia,tegra20-spdif";
+		reg = <0x70002400 0x200>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SPDIF_OUT>,
+			 <&tegra_car TEGRA20_CLK_SPDIF_IN>;
+		clock-names = "out", "in";
+		resets = <&tegra_car 10>;
+		dmas = <&apbdma 3>, <&apbdma 3>;
+		dma-names = "rx", "tx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SPDIF_OUT>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_A_OUT0>;
+	};
+
+	tegra_i2s1: i2s@70002800 {
+		compatible = "nvidia,tegra20-i2s";
+		reg = <0x70002800 0x200>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_I2S1>;
+		resets = <&tegra_car 11>;
+		reset-names = "i2s";
+		dmas = <&apbdma 2>, <&apbdma 2>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	tegra_i2s2: i2s@70002a00 {
+		compatible = "nvidia,tegra20-i2s";
+		reg = <0x70002a00 0x200>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_I2S2>;
+		resets = <&tegra_car 18>;
+		reset-names = "i2s";
+		dmas = <&apbdma 1>, <&apbdma 1>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra20-uart" and to enable the APB DMA based serial
+	 * driver, the compatible is "nvidia,tegra20-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uarte: serial@70006400 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006400 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTE>;
+		resets = <&tegra_car 66>;
+		reset-names = "serial";
+		dmas = <&apbdma 20>, <&apbdma 20>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	nand-controller@70008000 {
+		compatible = "nvidia,tegra20-nand";
+		reg = <0x70008000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
+		clock-names = "nand";
+		resets = <&tegra_car 13>;
+		reset-names = "nand";
+		assigned-clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
+		assigned-clock-rates = <150000000>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&ndflash_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	gmi@70009000 {
+		compatible = "nvidia,tegra20-gmi";
+		reg = <0x70009000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xd0000000 0xfffffff>;
+		clocks = <&tegra_car TEGRA20_CLK_NOR>;
+		clock-names = "gmi";
+		resets = <&tegra_car 42>;
+		reset-names = "gmi";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&nor_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA20_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C1>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000c380 {
+		compatible = "nvidia,tegra20-sflash";
+		reg = <0x7000c380 0x80>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SPI>;
+		resets = <&tegra_car 43>;
+		reset-names = "spi";
+		dmas = <&apbdma 11>, <&apbdma 11>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c2: i2c@7000c400 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C2>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra20-i2c-dvc";
+		reg = <0x7000d000 0x200>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_DVC>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d400 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC1>;
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d600 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC2>;
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d800 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC3>;
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000da00 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC4>;
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_RTC>;
+	};
+
+	kbc@7000e200 {
+		compatible = "nvidia,tegra20-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_KBC>;
+		resets = <&tegra_car 36>;
+		reset-names = "kbc";
+		status = "disabled";
+	};
+
+	tegra_pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra20-pmc";
+		reg = <0x7000e400 0x400>;
+		clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
+
+		pd_core: core-domain {
+			#power-domain-cells = <0>;
+			operating-points-v2 = <&core_opp_table>;
+		};
+
+		powergates {
+			pd_mpe: mpe {
+				clocks = <&tegra_car TEGRA20_CLK_MPE>;
+				resets = <&mc TEGRA20_MC_RESET_MPEA>,
+					 <&mc TEGRA20_MC_RESET_MPEB>,
+					 <&mc TEGRA20_MC_RESET_MPEC>,
+					 <&tegra_car TEGRA20_CLK_MPE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_3d: td {
+				clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+				resets = <&mc TEGRA20_MC_RESET_3D>,
+					 <&tegra_car TEGRA20_CLK_GR3D>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_vde: vdec {
+				clocks = <&tegra_car TEGRA20_CLK_VDE>;
+				resets = <&mc TEGRA20_MC_RESET_VDE>,
+					 <&tegra_car TEGRA20_CLK_VDE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_venc: venc {
+				clocks = <&tegra_car TEGRA20_CLK_ISP>,
+					 <&tegra_car TEGRA20_CLK_VI>,
+					 <&tegra_car TEGRA20_CLK_CSI>;
+				resets = <&mc TEGRA20_MC_RESET_ISP>,
+					 <&mc TEGRA20_MC_RESET_VI>,
+					 <&tegra_car TEGRA20_CLK_ISP>,
+					 <&tegra_car 20 /* VI */>,
+					 <&tegra_car TEGRA20_CLK_CSI>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	mc: memory-controller@7000f000 {
+		compatible = "nvidia,tegra20-mc-gart";
+		reg = <0x7000f000 0x00000400>, /* controller registers */
+		      <0x58000000 0x02000000>; /* GART aperture */
+		clocks = <&tegra_car TEGRA20_CLK_MC>;
+		clock-names = "mc";
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		#reset-cells = <1>;
+		#iommu-cells = <0>;
+		#interconnect-cells = <1>;
+	};
+
+	emc: memory-controller@7000f400 {
+		compatible = "nvidia,tegra20-emc";
+		reg = <0x7000f400 0x400>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_EMC>;
+		power-domains = <&pd_core>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interconnect-cells = <0>;
+
+		nvidia,memory-controller = <&mc>;
+		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra20-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	pcie@80003000 {
+		compatible = "nvidia,tegra20-pcie";
+		device_type = "pci";
+		reg = <0x80003000 0x00000800>, /* PADS registers */
+		      <0x80003800 0x00000200>, /* AFI registers */
+		      <0x90000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x00001000>, /* port 0 registers */
+			 <0x02000000 0 0x80001000 0x80001000 0 0x00001000>, /* port 1 registers */
+			 <0x01000000 0 0          0x82000000 0 0x00010000>, /* downstream I/O */
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x08000000>, /* non-prefetchable memory */
+			 <0x42000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA20_CLK_PEX>,
+			 <&tegra_car TEGRA20_CLK_AFI>,
+			 <&tegra_car TEGRA20_CLK_PLL_E>;
+		clock-names = "pex", "afi", "pll_e";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&pcie_dvfs_opp_table>;
+
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-ehci";
+		reg = <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA20_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,needs-double-reset;
+		nvidia,phy = <&phy1>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usbd_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@c5000000 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5000000 0x4000>,
+		      <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA20_CLK_USBD>,
+			 <&tegra_car TEGRA20_CLK_PLL_U>,
+			 <&tegra_car TEGRA20_CLK_CLK_M>,
+			 <&tegra_car TEGRA20_CLK_USBD>;
+		clock-names = "reg", "pll_u", "timer", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,has-legacy-mode;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <1>;
+		nvidia,xcvr-lsrslew = <1>;
+		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		compatible = "nvidia,tegra20-ehci";
+		reg = <0xc5004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car TEGRA20_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb2_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@c5004000 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car TEGRA20_CLK_USB2>,
+			 <&tegra_car TEGRA20_CLK_PLL_U>,
+			 <&tegra_car TEGRA20_CLK_CDEV2>;
+		clock-names = "reg", "pll_u", "ulpi-link";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,pmc = <&tegra_pmc 1>;
+		status = "disabled";
+	};
+
+	usb@c5008000 {
+		compatible = "nvidia,tegra20-ehci";
+		reg = <0xc5008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA20_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb3_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@c5008000 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5008000 0x4000>,
+		      <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA20_CLK_USB3>,
+			 <&tegra_car TEGRA20_CLK_PLL_U>,
+			 <&tegra_car TEGRA20_CLK_CLK_M>,
+			 <&tegra_car TEGRA20_CLK_USBD>;
+		clock-names = "reg", "pll_u", "timer", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		nvidia,pmc = <&tegra_pmc 2>;
+		status = "disabled";
+	};
+
+	mmc@c8000000 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000000 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc1_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	mmc@c8000200 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000200 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC2>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc2_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	mmc@c8000400 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000400 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC3>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc3_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	mmc@c8000600 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000600 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC4>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc4_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clocks = <&tegra_car TEGRA20_CLK_CCLK>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clocks = <&tegra_car TEGRA20_CLK_CCLK>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&{/cpus/cpu@0}>,
+				     <&{/cpus/cpu@1}>;
+	};
+
+	sound-hdmi {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "NVIDIA Tegra20 HDMI";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+
+			codec {
+				sound-dai = <&tegra_hdmi>;
+			};
+
+			cpu {
+				sound-dai = <&tegra_spdif>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts b/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts
new file mode 100644
index 0000000000000..842b5faba2856
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis T30 on Apalis Evaluation Board";
+	compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30",
+		     "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@2d";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pcie@3000 {
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+	 * carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+	i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* SPI5: Apalis SPI2 */
+	spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* Apalis SD1 */
+	mmc@78000000 {
+		status = "okay";
+		bus-width = <4>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	/* Apalis MMC1 */
+	mmc@78000400 {
+		status = "okay";
+		bus-width = <8>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* BKL1_PWM */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts
new file mode 100644
index 0000000000000..ca277bf1df784
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis T30 on Apalis Evaluation Board";
+	compatible = "toradex,apalis_t30-v1.1-eval", "toradex,apalis_t30-eval",
+		     "toradex,apalis_t30-v1.1", "toradex,apalis_t30",
+		     "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@2d";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pcie@3000 {
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+	 * carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+	i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* SPI5: Apalis SPI2 */
+	spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* Apalis SD1 */
+	mmc@78000000 {
+		status = "okay";
+		bus-width = <4>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	/* Apalis MMC1 */
+	mmc@78000400 {
+		status = "okay";
+		bus-width = <8>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		vqmmc-supply = <&reg_vddio_sdmmc3>;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* BKL1_PWM */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/*
+	 * 1.8 volt resp. 3.3 volt VDDIO_SDMMC3 depending on
+	 * EN_+3.3_SDMMC3 GPIO
+	 */
+	reg_vddio_sdmmc3: regulator-vddio-sdmmc3 {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_SDMMC3";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-type = "voltage";
+		gpios = <&gpio TEGRA_GPIO(J, 5) GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vddio_sdmmc_1v8_reg>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
new file mode 100644
index 0000000000000..a4b7fe5c3d236
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
@@ -0,0 +1,1202 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Apalis T30 Module Device Tree
+ * Compatible for Revisions 1GB: V1.1A, V1.1B; 1GB IT: V1.1A, V1.1B;
+ * 2GB: V1.1A, V1.1B
+ */
+/ {
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	pcie@3000 {
+		status = "okay";
+		avdd-pexa-supply = <&vdd2_reg>;
+		avdd-pexb-supply = <&vdd2_reg>;
+		avdd-pex-pll-supply = <&vdd2_reg>;
+		avdd-plle-supply = <&ldo6_reg>;
+		hvdd-pex-supply = <&reg_module_3v3>;
+		vddio-pex-ctl-supply = <&reg_module_3v3>;
+		vdd-pexa-supply = <&vdd2_reg>;
+		vdd-pexb-supply = <&vdd2_reg>;
+
+		/* Apalis type specific */
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		/* Apalis PCIe */
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		/* I210/I211 Gigabit Ethernet Controller (on-module) */
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+
+			ethernet@0,0 {
+				reg = <0 0 0 0 0>;
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			clk1-out-pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-fs-pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_sclk_pp3",
+					      "dap3_din_pp1",
+					      "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_ON */
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			uart3-rts-n-pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
+			uart3-cts-n-pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAN1 on SPI6 */
+			spi2-cs0-n-px3 {
+				nvidia,pins = "spi2_cs0_n_px3",
+					      "spi2_miso_px1",
+					      "spi2_mosi_px0",
+					      "spi2_sck_px2";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* CAN_INT1 */
+			spi2-cs1-n-pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis CAN2 on SPI4 */
+			gmi-a16-pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+					      "gmi_a17_pb0",
+					      "gmi_a18_pb1",
+					      "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* CAN_INT2 */
+			spi2-cs2-n-pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis Digital Audio */
+			clk1-req-pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk2-out-pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-fs-pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis GPIO */
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_col1_pq1",
+					      "kb_row10_ps2",
+					      "kb_row11_ps3",
+					      "kb_row12_ps4",
+					      "kb_row13_ps5",
+					      "kb_row14_ps6",
+					      "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1 */
+			hdmi-cec-pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi-int-pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C1 */
+			gen1-i2c-scl-pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C2 (DDC) */
+			ddc-scl-pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 (CAM) */
+			cam-i2c-scl-pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis LCD1 */
+			lcd-d0-pe0 {
+				nvidia,pins = "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_pclk_pb3",
+					      "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc3-clk-pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3-dat0-pb7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_dat4_pd1",
+					      "sdmmc3_dat5_pd0",
+					      "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis MMC1_CD# */
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis Parallel Camera */
+			cam-mclk-pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_d0_pt4",
+					      "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d4_pl2",
+					      "vi_d5_pl3",
+					      "vi_d6_pl4",
+					      "vi_d7_pl5",
+					      "vi_d8_pl6",
+					      "vi_d9_pl7",
+					      "vi_d10_pt2",
+					      "vi_d11_pt3",
+					      "vi_hsync_pd7",
+					      "vi_pclk_pt0",
+					      "vi_vsync_pd6";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			kb-col2-pq2 {
+				nvidia,pins = "kb_col2_pq2",
+					      "kb_col3_pq3",
+					      "kb_col4_pq4",
+					      "kb_row4_pr4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0",
+					      "kb_row1_pr1",
+					      "kb_row2_pr2",
+					      "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row5-pr5 {
+				nvidia,pins = "kb_row5_pr5",
+					      "kb_row6_pr6",
+					      "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * VI level-shifter direction
+			 * (pull-down => default direction input)
+			 */
+			vi-mclk-pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM1 */
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM2 */
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM3 */
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM4 */
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis RESET_MOCI# */
+			gmi-rst-n-pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SATA1_ACT# */
+			pex-l0-prsnt-n-pdd0 {
+				nvidia,pins = "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc1-clk-pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1-cmd-pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis SD1_CD# */
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPDIF1 */
+			spdif-out-pk5 {
+				nvidia,pins = "spdif_out_pk5",
+					      "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			spi1-sck-px5 {
+				nvidia,pins = "spi1_sck_px5",
+					      "spi1_mosi_px4",
+					      "spi1_miso_px7",
+					      "spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			lcd-sck-pz4 {
+				nvidia,pins = "lcd_sck_pz4",
+					      "lcd_sdout_pn5",
+					      "lcd_sdin_pz2",
+					      "lcd_cs0_n_pn4";
+				nvidia,function = "spi5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * Apalis TS (Low-speed type specific)
+			 * pins may be used as GPIOs
+			 */
+			kb-col5-pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-col6-pq6 {
+				nvidia,pins = "kb_col6_pq6",
+					      "kb_col7_pq7",
+					      "kb_row8_ps0",
+					      "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis UART1 */
+			ulpi-data0 {
+				nvidia,pins = "ulpi_data0_po1",
+					      "ulpi_data1_po2",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data5_po6",
+					      "ulpi_data6_po7",
+					      "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart2-rxd-pc3 {
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart3-rxd-pw7 {
+				nvidia,pins = "uart3_rxd_pw7",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_EN */
+			pex-l0-rst-n-pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_OC# */
+			pex-l0-clkreq-n-pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			gen2-i2c-scl-pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			gen2-i2c-sda-pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis VGA1 not supported and therefore disabled */
+			crt-hsync-pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* eMMC (On-module) */
+			sdmmc4-clk-pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4",
+					      "sdmmc4_cmd_pt7",
+					      "sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat0-paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* EN_+3.3_SDMMC3 */
+			uart2-cts-n-pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */
+			pex-l2-prsnt-n-pdd7 {
+				nvidia,pins = "pex_l2_prsnt_n_pdd7",
+					      "pex_l2_rst_n_pcc6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */
+			pex-wake-n-pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3",
+					      "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* LAN i210/i211 SMB_ALERT_N (On-module) */
+			sys-clk-req-pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LVDS Transceiver Configuration */
+			pbb0 {
+				nvidia,pins = "pbb0",
+					      "pbb7",
+					      "pcc1",
+					      "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+					      "pbb4",
+					      "pbb5",
+					      "pbb6";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Not connected and therefore disabled */
+			clk-32k-out-pa0 {
+				nvidia,pins = "clk3_out_pee0",
+					      "clk3_req_pee1",
+					      "clk_32k_out_pa0",
+					      "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_fs_pp4",
+					      "dap4_sclk_pp7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2-fs-pa2 {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5",
+					      "lcd_dc0_pn6",
+					      "lcd_m1_pw1",
+					      "lcd_pwr1_pc1",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l1_prsnt_n_pdd4",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad4_pg4",
+					      "gmi_ad5_pg5",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_ad8_ph0",
+					      "gmi_ad9_ph1",
+					      "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad12_ph4",
+					      "gmi_ad13_ph5",
+					      "gmi_ad14_ph6",
+					      "gmi_ad15_ph7",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1",
+					      "gmi_cs4_n_pk2",
+					      "gmi_cs2_n_pk3",
+					      "gmi_dqs_pi2",
+					      "gmi_iordy_pi5",
+					      "gmi_oe_n_pi1",
+					      "gmi_wait_pi7",
+					      "gmi_wr_n_pi0",
+					      "lcd_cs1_n_pw0",
+					      "pu0",
+					      "pu1",
+					      "pu2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs0-n-pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+					      "gmi_cs1_n_pj2",
+					      "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs6-n-pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs7-n-pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_pwr2_pc6",
+					      "lcd_wr_n_pz3";
+				nvidia,function = "hdcp";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2-rts-n-pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Power I2C (On-module) */
+			pwr-i2c-scl-pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
+			 * temperature sensor therefore requires disabling for
+			 * now
+			 */
+			lcd-dc1-pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* TOUCH_PEN_INT# (On-module) */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		clock-frequency = <10000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			#sound-dai-cells = <0>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vio>;
+			VDDIO-supply = <&reg_module_3v3>;
+			clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&reg_module_3v3>;
+			vcc2-supply = <&reg_module_3v3>;
+			vcc3-supply = <&reg_1v8_vio>;
+			vcc4-supply = <&reg_module_3v3>;
+			vcc5-supply = <&reg_module_3v3>;
+			vcc6-supply = <&reg_1v8_vio>;
+			vcc7-supply = <&reg_5v0_charge_pump>;
+			vccio-supply = <&reg_module_3v3>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "+V1.35_VDDIO_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "+V1.05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "+V1.0_VDD_CPU";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+				};
+
+				reg_1v8_vio: vio {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * 1.8 volt +VDDIO_SDMMC3 in case EN_+3.3_SDMMC3
+				 * is off
+				 */
+				vddio_sdmmc_1v8_reg: ldo1 {
+					regulator-name = "+VDDIO_SDMMC3_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * EN_+V3.3 switching via FET:
+				 * +V3.3_AUDIO_AVDD_S, +V3.3
+				 * see also +V3.3 fixed supply
+				 */
+				ldo2_reg: ldo2 {
+					regulator-name = "EN_+V3.3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: ldo3 {
+					regulator-name = "+V1.2_CSI";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo4_reg: ldo4 {
+					regulator-name = "+V1.2_VDD_RTC";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V2.8_AVDD_VDAC:
+				 * only required for (unsupported) analog RGB
+				 */
+				ldo5_reg: ldo5 {
+					regulator-name = "+V2.8_AVDD_VDAC";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+				 * but LDO6 can't set voltage in 50mV
+				 * granularity
+				 */
+				ldo6_reg: ldo6 {
+					regulator-name = "+V1.05_AVDD_PLLE";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "+V1.2_AVDD_PLL";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "+V1.0_VDD_DDR_HS";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/* STMPE811 touch screen controller */
+		touchscreen@41 {
+			compatible = "st,stmpe811";
+			reg = <0x41>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			interrupt-controller;
+			id = <0>;
+			blocks = <0x5>;
+			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				/* forbid to use ADC channels 3-0 (touch) */
+				st,norequest-mask = <0x0F>;
+			};
+
+			stmpe_touchscreen {
+				compatible = "st,stmpe-ts";
+				/* 8 sample average control */
+				st,ave-ctrl = <3>;
+				/* 7 length fractional part in z */
+				st,fraction-z = <7>;
+				/*
+				 * 50 mA typical 80 mA max touchscreen drivers
+				 * current limit value
+				 */
+				st,i-drive = <1>;
+				/* 1 ms panel driver settling time */
+				st,settling = <3>;
+				/* 5 ms touch detect interrupt delay */
+				st,touch-det-delay = <5>;
+			};
+		};
+
+		/*
+		 * LM95245 temperature sensor
+		 * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
+		 */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+
+		/* SW: +V1.2_VDD_CORE */
+		regulator@60 {
+			compatible = "ti,tps62362";
+			reg = <0x60>;
+
+			regulator-name = "tps62362-vout";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
+	/* SPI4: CAN2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@1 {
+			compatible = "microchip,mcp2515";
+			reg = <1>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	/* SPI6: CAN1 */
+	spi@7000de00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x1>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080500 {
+			status = "okay";
+		};
+	};
+
+	/* eMMC */
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vio>; /* VCCQ */
+		mmc-ddr-1_8v;
+	};
+
+	clk16m: clock-osc4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	clk32k_in: clock-xtal1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.8_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_1v8_vio>;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_5v0_charge_pump: regulator-5v0-charge-pump {
+		compatible = "regulator-fixed";
+		regulator-name = "+V5.0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis T30";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
new file mode 100644
index 0000000000000..d731038840008
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
@@ -0,0 +1,1185 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Apalis T30 Module Device Tree
+ * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C, V1.0E
+ */
+/ {
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	pcie@3000 {
+		status = "okay";
+		avdd-pexa-supply = <&vdd2_reg>;
+		avdd-pexb-supply = <&vdd2_reg>;
+		avdd-pex-pll-supply = <&vdd2_reg>;
+		avdd-plle-supply = <&ldo6_reg>;
+		hvdd-pex-supply = <&reg_module_3v3>;
+		vddio-pex-ctl-supply = <&reg_module_3v3>;
+		vdd-pexa-supply = <&vdd2_reg>;
+		vdd-pexb-supply = <&vdd2_reg>;
+
+		/* Apalis type specific */
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		/* Apalis PCIe */
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		/* I210/I211 Gigabit Ethernet Controller (on-module) */
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+
+			ethernet@0,0 {
+				reg = <0 0 0 0 0>;
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			clk1-out-pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-fs-pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_sclk_pp3",
+					      "dap3_din_pp1",
+					      "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_ON */
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			uart3-rts-n-pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
+			uart3-cts-n-pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAN1 on SPI6 */
+			spi2-cs0-n-px3 {
+				nvidia,pins = "spi2_cs0_n_px3",
+					      "spi2_miso_px1",
+					      "spi2_mosi_px0",
+					      "spi2_sck_px2";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* CAN_INT1 */
+			spi2-cs1-n-pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis CAN2 on SPI4 */
+			gmi-a16-pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+					      "gmi_a17_pb0",
+					      "gmi_a18_pb1",
+					      "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* CAN_INT2 */
+			spi2-cs2-n-pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis Digital Audio */
+			clk1-req-pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk2-out-pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-fs-pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis GPIO */
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_col1_pq1",
+					      "kb_row10_ps2",
+					      "kb_row11_ps3",
+					      "kb_row12_ps4",
+					      "kb_row13_ps5",
+					      "kb_row14_ps6",
+					      "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1 */
+			hdmi-cec-pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi-int-pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C1 */
+			gen1-i2c-scl-pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C2 (DDC) */
+			ddc-scl-pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 (CAM) */
+			cam-i2c-scl-pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis LCD1 */
+			lcd-d0-pe0 {
+				nvidia,pins = "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_pclk_pb3",
+					      "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc3-clk-pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3-dat0-pb7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_dat4_pd1",
+					      "sdmmc3_dat5_pd0",
+					      "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis MMC1_CD# */
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis Parallel Camera */
+			cam-mclk-pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_d0_pt4",
+					      "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d4_pl2",
+					      "vi_d5_pl3",
+					      "vi_d6_pl4",
+					      "vi_d7_pl5",
+					      "vi_d8_pl6",
+					      "vi_d9_pl7",
+					      "vi_d10_pt2",
+					      "vi_d11_pt3",
+					      "vi_hsync_pd7",
+					      "vi_pclk_pt0",
+					      "vi_vsync_pd6";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			kb-col2-pq2 {
+				nvidia,pins = "kb_col2_pq2",
+					      "kb_col3_pq3",
+					      "kb_col4_pq4",
+					      "kb_row4_pr4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0",
+					      "kb_row1_pr1",
+					      "kb_row2_pr2",
+					      "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row5-pr5 {
+				nvidia,pins = "kb_row5_pr5",
+					      "kb_row6_pr6",
+					      "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * VI level-shifter direction
+			 * (pull-down => default direction input)
+			 */
+			vi-mclk-pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM1 */
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM2 */
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM3 */
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM4 */
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis RESET_MOCI# */
+			gmi-rst-n-pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SATA1_ACT# */
+			pex-l0-prsnt-n-pdd0 {
+				nvidia,pins = "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc1-clk-pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1-cmd-pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis SD1_CD# */
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPDIF1 */
+			spdif-out-pk5 {
+				nvidia,pins = "spdif_out_pk5",
+					      "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			spi1-sck-px5 {
+				nvidia,pins = "spi1_sck_px5",
+					      "spi1_mosi_px4",
+					      "spi1_miso_px7",
+					      "spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			lcd-sck-pz4 {
+				nvidia,pins = "lcd_sck_pz4",
+					      "lcd_sdout_pn5",
+					      "lcd_sdin_pz2",
+					      "lcd_cs0_n_pn4";
+				nvidia,function = "spi5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * Apalis TS (Low-speed type specific)
+			 * pins may be used as GPIOs
+			 */
+			kb-col5-pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-col6-pq6 {
+				nvidia,pins = "kb_col6_pq6",
+					      "kb_col7_pq7",
+					      "kb_row8_ps0",
+					      "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis UART1 */
+			ulpi-data0 {
+				nvidia,pins = "ulpi_data0_po1",
+					      "ulpi_data1_po2",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data5_po6",
+					      "ulpi_data6_po7",
+					      "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart2-rxd-pc3 {
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart3-rxd-pw7 {
+				nvidia,pins = "uart3_rxd_pw7",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_EN */
+			pex-l0-rst-n-pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_OC# */
+			pex-l0-clkreq-n-pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			gen2-i2c-scl-pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			gen2-i2c-sda-pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis VGA1 not supported and therefore disabled */
+			crt-hsync-pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* eMMC (On-module) */
+			sdmmc4-clk-pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4",
+					      "sdmmc4_cmd_pt7",
+					      "sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat0-paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */
+			pex-l2-prsnt-n-pdd7 {
+				nvidia,pins = "pex_l2_prsnt_n_pdd7",
+					      "pex_l2_rst_n_pcc6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */
+			pex-wake-n-pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3",
+					      "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* LAN i210/i211 SMB_ALERT_N (On-module) */
+			sys-clk-req-pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LVDS Transceiver Configuration */
+			pbb0 {
+				nvidia,pins = "pbb0",
+					      "pbb7",
+					      "pcc1",
+					      "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+					      "pbb4",
+					      "pbb5",
+					      "pbb6";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Not connected and therefore disabled */
+			clk-32k-out-pa0 {
+				nvidia,pins = "clk3_out_pee0",
+					      "clk3_req_pee1",
+					      "clk_32k_out_pa0",
+					      "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_fs_pp4",
+					      "dap4_sclk_pp7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2-fs-pa2 {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5",
+					      "lcd_dc0_pn6",
+					      "lcd_m1_pw1",
+					      "lcd_pwr1_pc1",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l1_prsnt_n_pdd4",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad4_pg4",
+					      "gmi_ad5_pg5",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_ad8_ph0",
+					      "gmi_ad9_ph1",
+					      "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad12_ph4",
+					      "gmi_ad13_ph5",
+					      "gmi_ad14_ph6",
+					      "gmi_ad15_ph7",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1",
+					      "gmi_cs4_n_pk2",
+					      "gmi_cs2_n_pk3",
+					      "gmi_dqs_pi2",
+					      "gmi_iordy_pi5",
+					      "gmi_oe_n_pi1",
+					      "gmi_wait_pi7",
+					      "gmi_wr_n_pi0",
+					      "lcd_cs1_n_pw0",
+					      "pu0",
+					      "pu1",
+					      "pu2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs0-n-pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+					      "gmi_cs1_n_pj2",
+					      "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs6-n-pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs7-n-pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_pwr2_pc6",
+					      "lcd_wr_n_pz3";
+				nvidia,function = "hdcp";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2-cts-n-pj5 {
+				nvidia,pins = "uart2_cts_n_pj5",
+					      "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Power I2C (On-module) */
+			pwr-i2c-scl-pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
+			 * temperature sensor therefore requires disabling for
+			 * now
+			 */
+			lcd-dc1-pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* TOUCH_PEN_INT# (On-module) */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		clock-frequency = <10000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			#sound-dai-cells = <0>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vio>;
+			VDDIO-supply = <&reg_module_3v3>;
+			clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&reg_module_3v3>;
+			vcc2-supply = <&reg_module_3v3>;
+			vcc3-supply = <&reg_1v8_vio>;
+			vcc4-supply = <&reg_module_3v3>;
+			vcc5-supply = <&reg_module_3v3>;
+			vcc6-supply = <&reg_1v8_vio>;
+			vcc7-supply = <&reg_5v0_charge_pump>;
+			vccio-supply = <&reg_module_3v3>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "+V1.35_VDDIO_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "+V1.05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "+V1.0_VDD_CPU";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+				};
+
+				reg_1v8_vio: vio {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* LDO1: unused */
+
+				/*
+				 * EN_+V3.3 switching via FET:
+				 * +V3.3_AUDIO_AVDD_S, +V3.3
+				 * see also +V3.3 fixed supply
+				 */
+				ldo2_reg: ldo2 {
+					regulator-name = "EN_+V3.3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: ldo3 {
+					regulator-name = "+V1.2_CSI";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo4_reg: ldo4 {
+					regulator-name = "+V1.2_VDD_RTC";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V2.8_AVDD_VDAC:
+				 * only required for (unsupported) analog RGB
+				 */
+				ldo5_reg: ldo5 {
+					regulator-name = "+V2.8_AVDD_VDAC";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+				 * but LDO6 can't set voltage in 50mV
+				 * granularity
+				 */
+				ldo6_reg: ldo6 {
+					regulator-name = "+V1.05_AVDD_PLLE";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "+V1.2_AVDD_PLL";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "+V1.0_VDD_DDR_HS";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/* STMPE811 touch screen controller */
+		touchscreen@41 {
+			compatible = "st,stmpe811";
+			reg = <0x41>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			interrupt-controller;
+			id = <0>;
+			blocks = <0x5>;
+			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				/* forbid to use ADC channels 3-0 (touch) */
+				st,norequest-mask = <0x0F>;
+			};
+
+			stmpe_touchscreen {
+				compatible = "st,stmpe-ts";
+				/* 8 sample average control */
+				st,ave-ctrl = <3>;
+				/* 7 length fractional part in z */
+				st,fraction-z = <7>;
+				/*
+				 * 50 mA typical 80 mA max touchscreen drivers
+				 * current limit value
+				 */
+				st,i-drive = <1>;
+				/* 1 ms panel driver settling time */
+				st,settling = <3>;
+				/* 5 ms touch detect interrupt delay */
+				st,touch-det-delay = <5>;
+			};
+		};
+
+		/*
+		 * LM95245 temperature sensor
+		 * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
+		 */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+
+		/* SW: +V1.2_VDD_CORE */
+		regulator@60 {
+			compatible = "ti,tps62362";
+			reg = <0x60>;
+
+			regulator-name = "tps62362-vout";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
+	/* SPI4: CAN2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@1 {
+			compatible = "microchip,mcp2515";
+			reg = <1>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	/* SPI6: CAN1 */
+	spi@7000de00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x1>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080500 {
+			status = "okay";
+		};
+	};
+
+	/* eMMC */
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vio>; /* VCCQ */
+		mmc-ddr-1_8v;
+	};
+
+	clk16m: clock-osc4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	clk32k_in: clock-xtal1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.8_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_1v8_vio>;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_5v0_charge_pump: regulator-5v0-charge-pump {
+		compatible = "regulator-fixed";
+		regulator-name = "+V5.0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis T30";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-lvds-display.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-lvds-display.dtsi
new file mode 100644
index 0000000000000..bae09d82594d3
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-lvds-display.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This dtsi file describes parts common for Asus T30 devices with a LVDS panel. */
+
+#include <dt-bindings/gpio/tegra-gpio.h>
+
+/ {
+	host1x@50000000 {
+		lcd: dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					dpi_output: endpoint {
+						remote-endpoint = <&bridge_input>;
+						bus-width = <24>;
+					};
+				};
+			};
+		};
+	};
+
+	display-panel {
+		power-supply = <&vdd_pnl>;
+		ddc-i2c-bus = <&lcd_ddc>;
+		backlight = <&backlight>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&bridge_output>;
+			};
+		};
+	};
+
+	/* Texas Instruments SN75LVDS83B LVDS Transmitter */
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_input: endpoint {
+					remote-endpoint = <&dpi_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-E1565.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-E1565.dts
new file mode 100644
index 0000000000000..a25b8560b0cd4
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-E1565.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-nexus7-grouper-maxim-pmic.dtsi"
+#include "tegra30-asus-nexus7-grouper.dtsi"
+
+/ {
+	model = "ASUS Google Nexus 7 (Project Nakasi / ME370T) E1565";
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-PM269.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-PM269.dts
new file mode 100644
index 0000000000000..06ef13ea5df8d
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-PM269.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-nexus7-grouper-ti-pmic.dtsi"
+#include "tegra30-asus-nexus7-grouper.dtsi"
+
+/ {
+	model = "ASUS Google Nexus 7 (Project Nakasi / ME370T) PM269";
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi
new file mode 100644
index 0000000000000..c0062353c1f19
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi
@@ -0,0 +1,1320 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <0x0>;
+			tlm,version-minor = <0x0>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@bfdf0000 {
+			compatible = "ramoops";
+			reg = <0xbfdf0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;
+			no-map;
+		};
+	};
+
+	gpio@6000d000 {
+		init-low-power-mode-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		init-mode-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pwr1_pc1",
+						"lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_pclk_pb3 {
+				nvidia,pins = "lcd_pclk_pb3",
+						"lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7",
+						"lcd_cs0_n_pn4",
+						"lcd_sdout_pn5",
+						"lcd_dc0_pn6",
+						"lcd_cs1_n_pw0",
+						"lcd_sdin_pz2",
+						"lcd_sck_pz4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2",
+						"uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3",
+						"uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs4_n_pk2",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+						"gmi_cs0_n_pj0",
+						"gmi_cs1_n_pj2",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat5_pd0 {
+				nvidia,pins = "sdmmc3_dat5_pd0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1",
+						"gmi_ad14_ph6",
+						"pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2",
+						"gmi_ad3_pg3",
+						"gmi_ad6_pg6",
+						"gmi_ad7_pg7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad4_pg4 {
+				nvidia,pins = "gmi_ad4_pg4",
+						"gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad8_ph0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5",
+						"gmi_wr_n_pi0",
+						"gmi_oe_n_pi1",
+						"gmi_adv_n_pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad15_ph7 {
+				nvidia,pins = "gmi_ad15_ph7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_dqs_pi2 {
+				nvidia,pins = "gmi_dqs_pi2",
+						"pu2",
+						"pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs7_n_pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6",
+						"gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_row1_pr1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2",
+						"kb_col3_pq3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4",
+						"kb_col5_pq5",
+						"kb_col7_pq7",
+						"kb_row2_pr2",
+						"kb_row4_pr4",
+						"kb_row5_pr5",
+						"kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6",
+						"kb_row8_ps0",
+						"kb_row9_ps1",
+						"kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3",
+						"kb_row12_ps4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0",
+						"pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck_pu7 {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+						"crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2",
+						"spi2_miso_px1",
+						"spi2_sck_px2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2_cs0_n_px3 {
+				nvidia,pins = "spi2_cs0_n_px3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4",
+						"spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_dir_py1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_wr_n_pz3 {
+				nvidia,pins = "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0",
+						"pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7",
+						"pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_rst_n_pcc3 {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l2_rst_n_pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+						"pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3",
+						"pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			drive_dap1 {
+				nvidia,pins = "drive_dap1",
+						"drive_dap2",
+						"drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1",
+						"drive_uart3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1",
+						"drive_sdio3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		/* GPS BCM4751 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* Azurewave AW-NH665 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vcc_3v3_ts>;
+			vccio-supply = <&vcc_3v3_ts>;
+
+			touchscreen-size-x = <2112>;
+			touchscreen-size-y = <1280>;
+			touchscreen-swapped-x-y;
+			touchscreen-inverted-x;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+		status = "okay";
+
+		compass@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0x0e>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 0) IRQ_TYPE_EDGE_RISING>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8>;
+
+			mount-matrix =	 "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+
+		light-sensor@1c {
+			compatible = "dynaimage,al3010";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+
+		accelerometer@68 {
+			compatible = "invensense,mpu6050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply   = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8>;
+
+			mount-matrix =	 "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <100000>;
+		status = "okay";
+
+		rt5640: audio-codec@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+
+			realtek,dmic1-data-pin = <1>;
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 3) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		fuel-gauge@55 {
+			compatible = "ti,bq27541";
+			reg = <0x55>;
+			power-supplies = <&power_supply>;
+		};
+
+		power_supply: charger@6a {
+			compatible = "summit,smb347";
+			reg = <0x6a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>;
+
+			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>;
+			summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>;
+			summit,enable-usb-charging;
+
+			monitored-battery = <&battery_cell>;
+
+			usb_vbus: usb-vbus {
+				regulator-name = "usb_vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-min-microamp = <750000>;
+				regulator-max-microamp = <750000>;
+
+				/*
+				 * SMB347 INOK input pin is connected to PMIC's
+				 * ACOK output, which is fixed to ACTIVE_LOW as
+				 * long as battery voltage is in a good range.
+				 *
+				 * Active INOK disables SMB347 output, so polarity
+				 * needs to be toggled when we want to get the
+				 * output.
+				 */
+				summit,needs-inok-toggle;
+			};
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_1v8>;
+
+		/* Azurewave AW-NH665 BCM4330 */
+		wifi@1 {
+			reg = <1>;
+			compatible = "brcm,bcm4329-fmac";
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "otg";
+		vbus-supply = <&usb_vbus>;
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		power-supply = <&vdd_5v0_sys>;
+		pwms = <&pwm 0 50000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <15>;
+	};
+
+	battery_cell: battery-cell {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <1800000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		/*
+		 * Nexus 7 supports two compatible panel models:
+		 *
+		 *  1. hydis,hv070wx2-1e0
+		 *  2. chunghwa,claa070wp03xg
+		 *
+		 * We want to use timing which is optimized for Nexus 7,
+		 * hence we need to customize the timing.
+		 */
+		compatible = "panel-lvds";
+
+		width-mm = <94>;
+		height-mm = <150>;
+		rotation = <180>;
+
+		data-mapping = "jeida-24";
+
+		/* DDC unconnected on Nexus 7 */
+		/delete-property/ ddc-i2c-bus;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-hall-sensor {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_5v0_sys: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <300000>;
+		gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vcc_3v3_ts: regulator-ts {
+		compatible = "regulator-fixed";
+		regulator-name = "ldo_s-1167_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-grouper",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "ASUS Google Nexus 7 ALC5642";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"DMIC1", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents Nexus 7
+		 * from getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
new file mode 100644
index 0000000000000..694c7fe37eb88
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+	i2c@7000d000 {
+		pmic: pmic@3c {
+			compatible = "maxim,max77663";
+			reg = <0x3c>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			system-power-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			cpu-pwr-req-hog {
+				gpio-hog;
+				gpios = <6 GPIO_ACTIVE_HIGH>;
+				input;
+			};
+
+			fps {
+				fps0 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+
+				fps1 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			max77620_default: pinmux {
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+			};
+
+			regulators {
+				in-sd0-supply = <&vdd_5v0_sys>;
+				in-sd1-supply = <&vdd_5v0_sys>;
+				in-sd2-supply = <&vdd_5v0_sys>;
+				in-sd3-supply = <&vdd_5v0_sys>;
+				in-sd4-supply = <&vdd_5v0_sys>;
+
+				in-ldo0-1-supply = <&vdd_1v35>;
+				in-ldo2-supply   = <&vdd_3v3_sys>;
+				in-ldo3-5-supply = <&vdd_3v3_sys>;
+				in-ldo4-6-supply = <&vdd_5v0_sys>;
+				in-ldo7-8-supply = <&vdd_1v35>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "vdd_cpu";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_core: sd1 {
+					regulator-name = "vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-coupled-with = <&vdd_cpu>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_1v8: sd2 {
+					regulator-name = "vdd_gen1v8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v35: sd3 {
+					regulator-name = "vdd_ddr3l_1v35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo0 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ddr_rx";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vcore_emmc: ldo3 {
+					regulator-name = "vcore_emmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <3100000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_camera";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo6 {
+					regulator-name = "vddio_sdmmc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7 {
+					regulator-name = "avdd_dsi_csi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo8 {
+					regulator-name = "avdd_pll";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	regulator-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_usb";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	pmc@7000e400 {
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x3c>;
+			nvidia,reg-addr = <0x41>;
+			nvidia,reg-data = <0xe0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-memory-timings.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-memory-timings.dtsi
new file mode 100644
index 0000000000000..8944a4a5a8d7d
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-memory-timings.dtsi
@@ -0,0 +1,1577 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>; /* Elpida EDJ2108EDBG-DJL-F */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = <
+					0x00020001 /* MC_EMEM_ARB_CFG */
+					0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = <
+					0x00010001 /* MC_EMEM_ARB_CFG */
+					0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x73430303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0xc0000030 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x72830504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000003 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x72440a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = <
+					0x00000005 /* MC_EMEM_ARB_CFG */
+					0xc000003d /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0608 /* MC_EMEM_ARB_DA_COVERS */
+					0x70850f09 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = <
+					0x0000000a /* MC_EMEM_ARB_CFG */
+					0xc0000079 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000010 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000b /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b10 /* MC_EMEM_ARB_DA_COVERS */
+					0x70ea1f11 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>; /* Hynix H5TC2G83CFR */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = <
+					0x00020001 /* MC_EMEM_ARB_CFG */
+					0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = <
+					0x00010001 /* MC_EMEM_ARB_CFG */
+					0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x73430303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0xc0000030 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x72830504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000003 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x72440a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = <
+					0x00000005 /* MC_EMEM_ARB_CFG */
+					0xc000003d /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0608 /* MC_EMEM_ARB_DA_COVERS */
+					0x70850f09 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = <
+					0x0000000a /* MC_EMEM_ARB_CFG */
+					0xc0000079 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000010 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000b /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b10 /* MC_EMEM_ARB_DA_COVERS */
+					0x70ea1f11 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>; /* Elpida EDJ2108EDBG-DJL-F */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000004 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000005 /* EMC_TXSR */
+					0x00000005 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000001 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x00000008 /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000009 /* EMC_TXSR */
+					0x00000009 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000005 /* EMC_RC */
+					0x00000010 /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000012 /* EMC_TXSR */
+					0x00000012 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000004 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x0000000a /* EMC_RC */
+					0x00000020 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000023 /* EMC_TXSR */
+					0x00000023 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000007 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration = <
+					0x0000000f /* EMC_RC */
+					0x00000034 /* EMC_RFC */
+					0x0000000a /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x000009e9 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000027a /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x00000039 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x0000000a /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000a2a /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x002600a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x00014000 /* EMC_DLL_XFORM_DQS4 */
+					0x00014000 /* EMC_DLL_XFORM_DQS5 */
+					0x00014000 /* EMC_DLL_XFORM_DQS6 */
+					0x00014000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x018b000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800014d4 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x0000001f /* EMC_RC */
+					0x00000069 /* EMC_RFC */
+					0x00000017 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000c /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000011 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000b /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001412 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000e /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x00000016 /* EMC_RW2PDEN */
+					0x00000072 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000007 /* EMC_TCLKSTOP */
+					0x00001453 /* EMC_TREFBW */
+					0x0000000c /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf00b0191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00000008 /* EMC_DLL_XFORM_DQS0 */
+					0x00000008 /* EMC_DLL_XFORM_DQS1 */
+					0x00000008 /* EMC_DLL_XFORM_DQS2 */
+					0x00000008 /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000c /* EMC_DLL_XFORM_DQ0 */
+					0x0000000c /* EMC_DLL_XFORM_DQ1 */
+					0x0000000c /* EMC_DLL_XFORM_DQ2 */
+					0x0000000c /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x0a000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0156000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+					0xf8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>; /* Hynix H5TC2G83CFR */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000004 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000005 /* EMC_TXSR */
+					0x00000005 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000001 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x00000008 /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000009 /* EMC_TXSR */
+					0x00000009 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000005 /* EMC_RC */
+					0x00000010 /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000012 /* EMC_TXSR */
+					0x00000012 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000004 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x0000000a /* EMC_RC */
+					0x00000020 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000023 /* EMC_TXSR */
+					0x00000023 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000007 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration = <
+					0x0000000f /* EMC_RC */
+					0x00000034 /* EMC_RFC */
+					0x0000000a /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x000009e9 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000027a /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x00000039 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x0000000a /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000a2a /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x002600a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x00014000 /* EMC_DLL_XFORM_DQS4 */
+					0x00014000 /* EMC_DLL_XFORM_DQS5 */
+					0x00014000 /* EMC_DLL_XFORM_DQS6 */
+					0x00014000 /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x018b000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800014d4 /* EMC_DYN_SELF_REF_CONTROL */
+					0xf8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000020 /* EMC_RC */
+					0x0000006a /* EMC_RFC */
+					0x00000017 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000c /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000011 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001412 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000e /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x00000016 /* EMC_RW2PDEN */
+					0x00000072 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000007 /* EMC_TCLKSTOP */
+					0x00001453 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf00b0191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000c /* EMC_DLL_XFORM_DQ0 */
+					0x0000000c /* EMC_DLL_XFORM_DQ1 */
+					0x0000000c /* EMC_DLL_XFORM_DQ2 */
+					0x0000000c /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0400013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x0a000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0155000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
new file mode 100644
index 0000000000000..ee4a3f4827690
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	i2c@7000d000 {
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_sys>;
+			vcc2-supply = <&vdd_5v0_sys>;
+			vcc3-supply = <&vdd_1v8>;
+			vcc4-supply = <&vdd_5v0_sys>;
+			vcc5-supply = <&vdd_5v0_sys>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_5v0_sys>;
+			vccio-supply = <&vdd_5v0_sys>;
+
+			regulators {
+				vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "vdd2_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	pmc@7000e400 {
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x80>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper.dtsi
new file mode 100644
index 0000000000000..c19a0419112a5
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra30-asus-nexus7-grouper-common.dtsi"
+#include "tegra30-asus-nexus7-grouper-memory-timings.dtsi"
+
+/ {
+	compatible = "asus,grouper", "nvidia,tegra30";
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs4_n_pk2",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	i2c@7000c500 {
+		nfc@28 {
+			compatible = "nxp,pn544-i2c";
+			reg = <0x28>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios   = <&gpio TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&gpio TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	display-panel {
+		panel-timing {
+			clock-frequency = <68000000>;
+			hactive = <800>;
+			vactive = <1280>;
+			hfront-porch = <24>;
+			hback-porch = <32>;
+			hsync-len = <24>;
+			vsync-len = <1>;
+			vfront-porch = <5>;
+			vback-porch = <32>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-E1565.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-E1565.dts
new file mode 100644
index 0000000000000..f1c63feb4af90
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-E1565.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-nexus7-grouper-maxim-pmic.dtsi"
+#include "tegra30-asus-nexus7-tilapia.dtsi"
+
+/ {
+	model = "ASUS Google Nexus 7 (Project Bach / ME370TG) E1565";
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-memory-timings.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-memory-timings.dtsi
new file mode 100644
index 0000000000000..9169de34fa00d
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-memory-timings.dtsi
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra30-asus-nexus7-grouper-memory-timings.dtsi"
+
+/ {
+	/*
+	 * Tilapia's memory timings are pretty much the same as the Grouper's
+	 * ones. There are few minor tunings made for a higher clock rates,
+	 * these differentiating timings are overridden here for Tilapia.
+	 */
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x0000001f /* EMC_RC */
+					0x00000069 /* EMC_RFC */
+					0x00000017 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000c /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000011 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000b /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001412 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000e /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x00000016 /* EMC_RW2PDEN */
+					0x00000072 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000007 /* EMC_TCLKSTOP */
+					0x00001453 /* EMC_TREFBW */
+					0x0000000c /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf00b0191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00000008 /* EMC_DLL_XFORM_DQS0 */
+					0x00000008 /* EMC_DLL_XFORM_DQS1 */
+					0x00000008 /* EMC_DLL_XFORM_DQS2 */
+					0x00000008 /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000c /* EMC_DLL_XFORM_DQ0 */
+					0x0000000c /* EMC_DLL_XFORM_DQ1 */
+					0x0000000c /* EMC_DLL_XFORM_DQ2 */
+					0x0000000c /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0156000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration = <
+					0x0000000f /* EMC_RC */
+					0x00000034 /* EMC_RFC */
+					0x0000000a /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x000009e9 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000027a /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x00000039 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x0000000a /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000a2a /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x002600a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x00014000 /* EMC_DLL_XFORM_DQS4 */
+					0x00014000 /* EMC_DLL_XFORM_DQS5 */
+					0x00014000 /* EMC_DLL_XFORM_DQS6 */
+					0x00014000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x018b000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800014d4 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000020 /* EMC_RC */
+					0x0000006a /* EMC_RFC */
+					0x00000017 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000c /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000011 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001412 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000e /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x00000016 /* EMC_RW2PDEN */
+					0x00000072 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000007 /* EMC_TCLKSTOP */
+					0x00001453 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf00b0191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00000008 /* EMC_DLL_XFORM_DQS0 */
+					0x00000008 /* EMC_DLL_XFORM_DQS1 */
+					0x00000008 /* EMC_DLL_XFORM_DQS2 */
+					0x00000008 /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000a /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x0c000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0155000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia.dtsi
new file mode 100644
index 0000000000000..94c80134574e9
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia.dtsi
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra30-asus-nexus7-grouper-common.dtsi"
+#include "tegra30-asus-nexus7-tilapia-memory-timings.dtsi"
+
+/ {
+	compatible = "asus,tilapia", "asus,grouper", "nvidia,tegra30";
+
+	gpio@6000d000 {
+		init-mode-3g-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(P, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(N, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(N, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(N, 0) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3",
+						"kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs4_n_pk2",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	i2c@7000c500 {
+		proximity-sensor@28 {
+			compatible = "microchip,cap1106";
+			reg = <0x28>;
+
+			/*
+			 * Binding doesn't support specifying linux,input-type
+			 * and this results in unwanted key-presses handled by
+			 * applications, hence keep it disabled for now.
+			 */
+			status = "disabled";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(R, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			linux,keycodes = <KEY_RESERVED>,
+					 <KEY_RESERVED>,
+					 <KEY_RESERVED>,
+					 <KEY_RESERVED>,
+					 <KEY_RESERVED>,
+					 <SW_FRONT_PROXIMITY>;
+		};
+
+		nfc@2a {
+			compatible = "nxp,pn544-i2c";
+			reg = <0x2a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios   = <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&gpio TEGRA_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	display-panel {
+		enable-gpios = <&gpio TEGRA_GPIO(V, 6) GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <81750000>;
+			hactive = <800>;
+			vactive = <1280>;
+			hfront-porch = <64>;
+			hback-porch = <128>;
+			hsync-len = <64>;
+			vsync-len = <1>;
+			vfront-porch = <5>;
+			vback-porch = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf201.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf201.dts
new file mode 100644
index 0000000000000..0406c5a69c120
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf201.dts
@@ -0,0 +1,644 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Prime TF201";
+	compatible = "asus,tf201", "nvidia,tegra30";
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Atmel MXT768E touchscreen */
+		touchscreen@4d {
+			compatible = "atmel,maxtouch";
+			reg = <0x4d>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+
+		magnetometer@e {
+			mount-matrix =  "-1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "1",  "0",  "0",
+							 "0", "-1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB EDB8132B2MA-8D-F LPDDR2 400MHz */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0x80000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0x80000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0x80000048
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000006
+					0x00000001 0x00000000 0x00000004 0x00000004
+					0x04040001 0x000d090c 0x71c6120d 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* TF201 Unknown 1GB LPDDR2 500MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0x80000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0x80000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-500000000 {
+				clock-frequency = <500000000>;
+
+				nvidia,emem-configuration = < 0x00000007 0x8000005a
+					0x00000003 0x00000004 0x0000000e 0x00000009
+					0x0000000c 0x00000002 0x00000002 0x00000008
+					0x00000001 0x00000000 0x00000004 0x00000005
+					0x05040001 0x00100a0e 0x71c8170f 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB EDB8132B2MA-8D-F LPDDR2 400MHz */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x00098000 0x00098000 0x00098000
+					0x00098000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x00098000 0x00098000 0x00098000
+					0x00098000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000018 0x00000018 0x00000018
+					0x00000018 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000a0000 0x000a0000 0x000a0000
+					0x000a0000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00120220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x00440084
+					0x00008000 0x00074000 0x00074000 0x00074000
+					0x00074000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000018 0x00000018 0x00000018
+					0x00000018 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00078000 0x00078000 0x00078000
+					0x00078000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010082>;
+				nvidia,emc-mode-2 = <0x00020004>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000024>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000017
+					0x00000033 0x00000010 0x00000007 0x00000007
+					0x00000007 0x00000002 0x0000000a 0x00000007
+					0x00000007 0x00000003 0x00000002 0x00000000
+					0x00000003 0x00000007 0x00000004 0x0000000d
+					0x0000000e 0x000005e9 0x00000000 0x0000017a
+					0x00000002 0x00000002 0x00000007 0x00000000
+					0x00000001 0x0000000c 0x00000038 0x00000038
+					0x00000006 0x00000014 0x00000009 0x00000004
+					0x00000002 0x00000680 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0x001d0084
+					0x00008000 0x0002c000 0x0002c000 0x0002c000
+					0x0002c000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000c0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000024 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000ce6 0xe0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* TF201 Unknown 1GB LPDDR2 500MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x00440084
+					0x00008000 0x00060000 0x00060000 0x00060000
+					0x00060000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000d0000 0x000d0000 0x000d0000
+					0x000d0000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-500000000 {
+				clock-frequency = <500000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020005>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000002d>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001d
+					0x00000040 0x00000014 0x00000008 0x00000007
+					0x00000009 0x00000003 0x0000000d 0x00000008
+					0x00000008 0x00000004 0x00000002 0x00000000
+					0x00000004 0x00000008 0x00000005 0x0000000d
+					0x0000000f 0x00000763 0x00000000 0x000001d8
+					0x00000003 0x00000003 0x00000008 0x00000000
+					0x00000001 0x0000000e 0x00000046 0x00000046
+					0x00000008 0x00000019 0x0000000b 0x00000004
+					0x00000002 0x00000820 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0xf0140091
+					0x00008000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x00080220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000b4 0x000d000d 0xa0f10404 0x00000000
+					0x00000000 0x80000fde 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	usb-phy@7d000000 {
+		/delete-property/ nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-setup = <5>;      /* Based on TF201 fuse value - 48 */
+	};
+
+	usb-phy@7d008000 {
+		/delete-property/ nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-setup = <5>;      /* Based on TF201 fuse value - 48 */
+	};
+
+	display-panel {
+		compatible = "hannstar,hsd101pww2";
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-533000000;
+		/delete-node/ opp-625000000;
+		/delete-node/ opp-667000000;
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-533000000-1200;
+		/delete-node/ opp-625000000-1200;
+		/delete-node/ opp-625000000-1250;
+		/delete-node/ opp-667000000-1200;
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf201",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Prime TF201 RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf300t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300t.dts
new file mode 100644
index 0000000000000..970a1f08dc8c3
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300t.dts
@@ -0,0 +1,1032 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Pad TF300T";
+	compatible = "asus,tf300t", "nvidia,tegra30";
+
+	gpio@6000d000 {
+		tf300t-init-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech EKTH1036 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2240>;
+			touchscreen-size-y = <1408>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+
+		magnetometer@e {
+			mount-matrix =   "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "-1",  "0",  "0",
+					  "0",  "1",  "0",
+					  "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Wolfson Microelectronics WM8903 audio codec */
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <
+				0x00000600 /* DMIC_LR, output */
+				0x00000680 /* DMIC_DAT, input */
+				0x00000000 /* Speaker-enable GPIO, output, low */
+				0xffffffff /* don't touch */
+				0xffffffff /* don't touch */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_vio>;
+			CPVDD-supply = <&vdd_1v8_vio>;
+			DBVDD-supply = <&vdd_1v8_vio>;
+			DCVDD-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x00000014 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0605 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000005
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x00000014 0xc0000079
+					0x00000003 0x00000004 0x00000011 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00140b11 0x70ea1f12 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00140b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x0f000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000003 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000b 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000020
+					0x0000006a 0x00000018 0x00000008 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0155000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xd8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xd8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000016 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000008
+					0x00000008 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xf8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	display-panel {
+		compatible = "innolux,g101ice-l01";
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-wm8903-tf300t",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Asus Transformer Pad TF300T WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN2L", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,audio-codec = <&wm8903>;
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tg.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tg.dts
new file mode 100644
index 0000000000000..4861db8e1e59f
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tg.dts
@@ -0,0 +1,1104 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Pad 3G TF300TG";
+	compatible = "asus,tf300tg", "nvidia,tegra30";
+
+	gpio@6000d000 {
+		tf300tg-init-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(P, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 3) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+			};
+
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech EKTH1036 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2240>;
+			touchscreen-size-y = <1408>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+
+		magnetometer@e {
+			mount-matrix =   "1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "-1",  "0",  "0",
+					  "0",  "1",  "0",
+					  "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0x8000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0x80000079
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0a00013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x0a000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000020
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00040000 0x00040000 0x00040000
+					0x00040000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000016 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0600013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	display-panel {
+		compatible = "innolux,g101ice-l01";
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf300tg",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Pad TF300TG RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf700t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf700t.dts
new file mode 100644
index 0000000000000..efde7dad718ad
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf700t.dts
@@ -0,0 +1,840 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+
+/ {
+	model = "Asus Transformer Infinity TF700T";
+	compatible = "asus,tf700t", "nvidia,tegra30";
+
+	host1x@50000000 {
+		lcd: dc@54200000 {
+			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
+				 <&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
+
+			rgb {
+				status = "okay";
+
+				port@0 {
+					dpi_output: endpoint {
+						remote-endpoint = <&bridge_input>;
+						bus-width = <24>;
+					};
+				};
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH665 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech ELAN-3024-7053 or 5184N FPC-1 REV: 2/3 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2944>;
+			touchscreen-size-y = <1856>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+
+		magnetometer@e {
+			mount-matrix =   "1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Micron 1GB 800MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000002 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000004 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000007 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086120a 0x001f0000 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emem-configuration = < 0x0000000c 0xc0000090
+					0x00000004 0x00000005 0x00000013 0x0000000c
+					0x0000000f 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d13 0x712c2414 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Elpida 1GB 800MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000002 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000004 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000007 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086120a 0x001f0000 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emem-configuration = < 0x0000000c 0xc0000090
+					0x00000004 0x00000005 0x00000013 0x0000000c
+					0x0000000f 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d13 0x712c2414 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Micron 1GB 800MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000006 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000007 0x00000007
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000003 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000005 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000009 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000012
+					0x00000066 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000bf0 0x00000000 0x000002fc
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000008 0x0000000f 0x0000006c 0x00000200
+					0x00000004 0x00000010 0x00000000 0x00000004
+					0x00000005 0x00000c30 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x001d0084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0158000c 0xa0f10000 0x00000000
+					0x00000000 0x800018c8 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000025
+					0x000000ce 0x0000001a 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000004 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001820 0x00000000 0x00000608
+					0x00000003 0x00000012 0x00000001 0x00000000
+					0x0000000f 0x00000018 0x000000d8 0x00000200
+					0x00000005 0x00000020 0x00000000 0x00000007
+					0x00000008 0x00001860 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf0070191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00f0000c 0xa0f10000 0x00000000
+					0x00000000 0x8000308c 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Elpida 1GB 800MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000006 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000007 0x00000007
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000003 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000005 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000009 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000012
+					0x00000066 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000bf0 0x00000000 0x000002fc
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000008 0x0000000f 0x0000006c 0x00000200
+					0x00000004 0x00000010 0x00000000 0x00000004
+					0x00000005 0x00000c30 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x001d0084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0158000c 0xa0f10000 0x00000000
+					0x00000000 0x800018c8 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000025
+					0x000000ce 0x0000001a 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000004 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001820 0x00000000 0x00000608
+					0x00000003 0x00000012 0x00000001 0x00000000
+					0x0000000f 0x00000018 0x000000d8 0x00000200
+					0x00000005 0x00000020 0x00000000 0x00000007
+					0x00000008 0x00001860 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf0070191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0a00013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00f0000c 0xa0f10000 0x00000000
+					0x00000000 0x8000308c 0xe8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	tc358768_refclk: clock-tc358768 {
+		compatible = "fixed-clock";
+		clock-frequency = <23100000>;
+		clock-accuracy = <100>;
+		#clock-cells = <0>;
+	};
+
+	tc358768_osc: clock-tc358768-osc-gate {
+		compatible = "gpio-gate-clock";
+		enable-gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>;
+		clocks = <&tc358768_refclk>;
+		#clock-cells = <0>;
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+
+		mux-gpios = <&gpio TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&lcd_ddc>;
+		idle-state = <0x0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi@7 {
+				compatible = "toshiba,tc358768";
+				reg = <0x7>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clocks = <&tc358768_osc>;
+				clock-names = "refclk";
+
+				reset-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+
+				vddc-supply = <&vdd_1v2_mipi>;
+				vddio-supply = <&vdd_1v8_vio>;
+				vddmipi-supply = <&vdd_1v2_mipi>;
+
+				/*
+				 * Panasonic VVX10F004B00 or HYDIS HV101WU1-1E1
+				 * LCD SuperIPS+ Full HD panel.
+				 */
+				panel@1 {
+					compatible = "panasonic,vvx10f004b00";
+					reg = <1>;
+
+					power-supply = <&vdd_pnl>;
+					backlight = <&backlight>;
+
+					port {
+						panel_input: endpoint {
+							remote-endpoint = <&bridge_output>;
+						};
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						bridge_input: endpoint {
+							remote-endpoint = <&dpi_output>;
+							data-lines = <24>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						bridge_output: endpoint {
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-900000000-1350;
+	};
+
+	vdd_1v2_mipi: regulator-mipi {
+		compatible = "regulator-fixed";
+		regulator-name = "tc358768_1v2_vdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <10000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf700t",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Infinity TF700T RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi
new file mode 100644
index 0000000000000..bdb898ad62622
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi
@@ -0,0 +1,1788 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = "/mmc@78000600"; /* eMMC */
+		mmc1 = "/mmc@78000000"; /* uSD slot */
+		mmc2 = "/mmc@78000400"; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display0 = &lcd;
+		display1 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@beb00000 {
+			compatible = "ramoops";
+			reg = <0xbeb00000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;	/* 2MB */
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+		};
+	};
+
+	gpio@6000d000 {
+		init-lpm-in-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		init-lpm-out-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(K, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		usb-charge-limit-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			output-high;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1_clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_cmd {
+				nvidia,pins = "sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_cd {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_wp {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5",
+						"vi_d2_pl0",
+						"vi_d3_pl1",
+						"vi_d5_pl3",
+						"vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6",
+						"vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3_clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat5_pd0",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4_clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_cmd {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_rst_n {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cam_mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			drive_sdmmc4 {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			/* I2C pinmux */
+			gen1_i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			gen2_i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			cam_i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			ddc_i2c {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			pwr_i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			hotplug_i2c {
+				nvidia,pins = "pu4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI pinmux */
+			hdmi_cec {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			hdmi_hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-A */
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-B */
+			uartb_txd_rts {
+				nvidia,pins = "uart2_txd_pc2",
+						"uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uartb_rxd_cts {
+				nvidia,pins = "uart2_rxd_pc3",
+						"uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uartc_rxd_cts {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartc_txd_rts {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_dir_py1",
+						"ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* I2S pinmux */
+			dap_i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap_i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_fs {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_dout {
+				nvidia,pins = "dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap_i2s3 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			nct_irq {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Asus EC pinmux */
+			ec_irqs {
+				nvidia,pins = "kb_row10_ps2",
+						"kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ec_reqs {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Memory type bootstrap */
+			mem_boostraps {
+				nvidia,pins = "gmi_ad4_pg4",
+						"gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex_l2_rst_n {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+						"pex_l0_rst_n_pdd1",
+						"pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_clkreq_n {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+						"pex_l0_prsnt_n_pdd0",
+						"pex_l0_clkreq_n_pdd2",
+						"pex_wake_n_pdd3",
+						"pex_l1_prsnt_n_pdd4",
+						"pex_l1_clkreq_n_pdd6",
+						"pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4",
+						"spi1_sck_px5",
+						"spi1_cs0_n_px6",
+						"spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hp_detect {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			mic_detect {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_a18_pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pclk_pb3",
+						"lcd_pwr1_pc1",
+						"lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7",
+						"lcd_dc0_pn6",
+						"lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_cs0_n_pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4",
+						"lcd_sdout_pn5",
+						"lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			blink {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col1_pq1 {
+				nvidia,pins = "kb_row1_pr1",
+						"kb_row3_pr3",
+						"kb_row8_ps0",
+						"kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4",
+						"kb_col5_pq5",
+						"kb_col7_pq7",
+						"kb_row2_pr2",
+						"kb_row4_pr4",
+						"kb_row5_pr5",
+						"kb_row12_ps4",
+						"kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs0_n_pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+						"gmi_cs1_n_pj2",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* GPIO keys pinmux */
+			power_key {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vol_keys {
+				nvidia,pins = "kb_col2_pq2",
+						"kb_col3_pq3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bluetooth */
+			bt_shutdown {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			bt_dev_wake {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt_host_wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+						"vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2",
+						"vi_d0_pt4", "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1",
+						"gmi_ad2_pg2",
+						"gmi_ad3_pg3",
+						"gmi_ad6_pg6",
+						"gmi_ad7_pg7",
+						"gmi_wr_n_pi0",
+						"gmi_oe_n_pi1",
+						"gmi_dqs_pi2",
+						"gmi_adv_n_pk0",
+						"gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad11_ph3",
+						"gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+						"gmi_rst_n_pi4",
+						"gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Vibrator control */
+			vibrator {
+				nvidia,pins = "gmi_ad15_ph7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PWM pimnmux */
+			pwm_0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm_2 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Spdif pinmux */
+			spdif_out {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_in {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+						"crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1_out {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_out {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_out {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sys_clk_req {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+						"clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive_dap1 {
+				nvidia,pins = "drive_dap1",
+						"drive_dap2",
+						"drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1",
+						"drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1",
+						"drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		bluetooth {
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply  = <&vdd_3v3_com>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	lcd_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0x0e>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8_vio>;
+		};
+
+		/* Dynaimage ambient light sensor */
+		light-sensor@1c {
+			compatible = "dynaimage,al3010";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_vio>;
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0x0f>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(O, 5) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_vio>;
+					vddio-supply = <&vdd_1v8_vio>;
+				};
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <93750>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_bat>;
+			vcc2-supply = <&vdd_5v0_bat>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_5v0_sys>;
+			vcc5-supply = <&vdd_5v0_bat>;
+			vcc6-supply = <&vdd_3v3_sys>;
+			vcc7-supply = <&vdd_5v0_bat>;
+			vccio-supply = <&vdd_5v0_bat>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				/* VDD1 is not used by Transformers */
+
+				vddio_ddr: vdd2 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					/* FIXME: eMMC won't work, if set to 1.8 V */
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDD */
+				vdd_usd: ldo2 {
+					regulator-name = "vdd_usd";
+					regulator-min-microvolt = <3100000>;
+					regulator-max-microvolt = <3100000>;
+					/* FIXME: Without this, voltage switching fails */
+					regulator-always-on;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo3 {
+					regulator-name = "vddio_usd";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3100000>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* LDO5 is not used by Transformers */
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		/* FIXME: LP1 doesn't work at the moment */
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		/* Set DEV_OFF + PWR_OFF_SET bit in DCDC control register of TPS65911 PMIC  */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {		/* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	mmc@78000000 {
+		status = "okay";
+
+		/* FIXME: Full 208Mhz clock rate doesn't work reliably */
+		max-frequency = <104000000>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>;	/* ldo2 */
+		vqmmc-supply = <&vddio_usd>;	/* ldo3 */
+	};
+
+	mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_com>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-NH615 BCM4329B1 or AW-NH665 BCM4330B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+		mmc-ddr-3_3v;
+		non-removable;
+	};
+
+	/* USB via ASUS connector */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_bat>;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_bl>;
+		pwms = <&pwm 0 4000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <40>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-dock-hall-sensor {
+			label = "Lid sensor";
+			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	vdd_5v0_bat: regulator-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_cp: regulator-sby {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sby";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_1v5_ddr: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_5v0_bl: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		nvidia,i2s-controller = <&tegra_i2s1>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * Transformers from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-beaver.dts b/arch/arm/boot/dts/nvidia/tegra30-beaver.dts
new file mode 100644
index 0000000000000..51769d5132aec
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-beaver.dts
@@ -0,0 +1,2138 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "NVIDIA Tegra30 Beaver evaluation board";
+	compatible = "nvidia,beaver", "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps65911@2d";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x7ff00000>;
+	};
+
+	pcie@3000 {
+		status = "okay";
+
+		avdd-pexa-supply = <&ldo1_reg>;
+		vdd-pexa-supply = <&ldo1_reg>;
+		avdd-pexb-supply = <&ldo1_reg>;
+		vdd-pexb-supply = <&ldo1_reg>;
+		avdd-pex-pll-supply = <&ldo1_reg>;
+		avdd-plle-supply = <&ldo1_reg>;
+		vddio-pex-ctl-supply = <&sys_3v3_reg>;
+		hvdd-pex-supply = <&sys_3v3_pexs_reg>;
+
+		pci@1,0 {
+			status = "okay";
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			vdd-supply = <&sys_3v3_reg>;
+			pll-supply = <&vio_reg>;
+
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmiddc>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a18_pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_pclk_pb3 {
+				nvidia,pins = "lcd_pclk_pb3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_pwr1_pc1 {
+				nvidia,pins = "lcd_pwr1_pc1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat5_pd0 {
+				nvidia,pins = "sdmmc3_dat5_pd0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat4_pd1 {
+				nvidia,pins = "sdmmc3_dat4_pd1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat6_pd3 {
+				nvidia,pins = "sdmmc3_dat6_pd3";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat7_pd4 {
+				nvidia,pins = "sdmmc3_dat7_pd4";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_hsync_pd7 {
+				nvidia,pins = "vi_hsync_pd7";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d0_pe0 {
+				nvidia,pins = "lcd_d0_pe0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d1_pe1 {
+				nvidia,pins = "lcd_d1_pe1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d2_pe2 {
+				nvidia,pins = "lcd_d2_pe2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d3_pe3 {
+				nvidia,pins = "lcd_d3_pe3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d4_pe4 {
+				nvidia,pins = "lcd_d4_pe4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d5_pe5 {
+				nvidia,pins = "lcd_d5_pe5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d6_pe6 {
+				nvidia,pins = "lcd_d6_pe6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d7_pe7 {
+				nvidia,pins = "lcd_d7_pe7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d8_pf0 {
+				nvidia,pins = "lcd_d8_pf0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d9_pf1 {
+				nvidia,pins = "lcd_d9_pf1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d10_pf2 {
+				nvidia,pins = "lcd_d10_pf2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d11_pf3 {
+				nvidia,pins = "lcd_d11_pf3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d12_pf4 {
+				nvidia,pins = "lcd_d12_pf4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d13_pf5 {
+				nvidia,pins = "lcd_d13_pf5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d14_pf6 {
+				nvidia,pins = "lcd_d14_pf6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d15_pf7 {
+				nvidia,pins = "lcd_d15_pf7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad1_pg1 {
+				nvidia,pins = "gmi_ad1_pg1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad3_pg3 {
+				nvidia,pins = "gmi_ad3_pg3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad4_pg4 {
+				nvidia,pins = "gmi_ad4_pg4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad7_pg7 {
+				nvidia,pins = "gmi_ad7_pg7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad8_ph0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad14_ph6 {
+				nvidia,pins = "gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_wr_n_pi0 {
+				nvidia,pins = "gmi_wr_n_pi0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_oe_n_pi1 {
+				nvidia,pins = "gmi_oe_n_pi1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_dqs_pi2 {
+				nvidia,pins = "gmi_dqs_pi2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs7_n_pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_wait_pi7 {
+				nvidia,pins = "gmi_wait_pi7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_de_pj1 {
+				nvidia,pins = "lcd_de_pj1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_hsync_pj3 {
+				nvidia,pins = "lcd_hsync_pj3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_vsync_pj4 {
+				nvidia,pins = "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_clk_pk1 {
+				nvidia,pins = "gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs2_n_pk3 {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs3_n_pk4 {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d2_pl0 {
+				nvidia,pins = "vi_d2_pl0";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d3_pl1 {
+				nvidia,pins = "vi_d3_pl1";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi_d5_pl3 {
+				nvidia,pins = "vi_d5_pl3";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi_d7_pl5 {
+				nvidia,pins = "vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d9_pl7 {
+				nvidia,pins = "vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d16_pm0 {
+				nvidia,pins = "lcd_d16_pm0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d17_pm1 {
+				nvidia,pins = "lcd_d17_pm1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d18_pm2 {
+				nvidia,pins = "lcd_d18_pm2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d19_pm3 {
+				nvidia,pins = "lcd_d19_pm3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d20_pm4 {
+				nvidia,pins = "lcd_d20_pm4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d21_pm5 {
+				nvidia,pins = "lcd_d21_pm5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d22_pm6 {
+				nvidia,pins = "lcd_d22_pm6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d23_pm7 {
+				nvidia,pins = "lcd_d23_pm7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_cs0_n_pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_sdout_pn5 {
+				nvidia,pins = "lcd_sdout_pn5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_dc0_pn6 {
+				nvidia,pins = "lcd_dc0_pn6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d11_pt3 {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d0_pt4 {
+				nvidia,pins = "vi_d0_pt4";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck_pu7 {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "clk_12m_out";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			crt_vsync_pv7 {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_cs1_n_pw0 {
+				nvidia,pins = "lcd_cs1_n_pw0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_m1_pw1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2_sck_px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_cs0_n_px6 {
+				nvidia,pins = "spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_sdin_pz2 {
+				nvidia,pins = "lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_wr_n_pz3 {
+				nvidia,pins = "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_sck_pz4 {
+				nvidia,pins = "lcd_sck_pz4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_rst_n_pcc3 {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l2_rst_n_pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l2_clkreq_n_pcc7 {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_prsnt_n_pdd0 {
+				nvidia,pins = "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_prsnt_n_pdd4 {
+				nvidia,pins = "pex_l1_prsnt_n_pdd4";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l2_prsnt_n_pdd7 {
+				nvidia,pins = "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <1>;
+				nvidia,slew-rate-falling = <1>;
+			};
+			gpv {
+				nvidia,pins = "drive_gpv";
+				nvidia,pull-up-strength = <16>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	hdmiddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		rt5640: rt5640@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_FALLING>;
+			realtek,ldo1-en-gpios =
+				<&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v_in_reg>;
+			vcc2-supply = <&vdd_5v_in_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&vdd_5v_in_reg>;
+			vcc5-supply = <&vdd_5v_in_reg>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_5v_in_reg>;
+			vccio-supply = <&vdd_5v_in_reg>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "vdd_1v5_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+				};
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&core_vdd_reg>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		core_vdd_reg: tps62361@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-coupled-with = <&vddctrl_reg>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		flash@1 {
+			compatible = "winbond,w25q32", "jedec,spi-nor";
+			reg = <1>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&core_vdd_reg>;
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	mmc@78000000 {
+		status = "okay";
+		vqmmc-supply = <&ldo5_reg>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+	};
+
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	phy2: usb-phy@7d004000 {
+		vbus-supply = <&sys_3v3_reg>;
+		status = "okay";
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		vbus-supply = <&usb3_vbus_reg>;
+		status = "okay";
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@2 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@3 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		gpled1 {
+			label = "LED1"; /* CR5A1 (blue) */
+			gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
+		};
+		gpled2 {
+			label = "LED2"; /* CR4A2 (green) */
+			gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vdd_5v_in_reg: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v_in";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	chargepump_5v_reg: regulator-chargepump {
+		compatible = "regulator-fixed";
+		regulator-name = "chargepump_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	ddr_reg: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
+
+	vdd_5v_sata_reg: regulator-sata {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v_sata";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
+
+	usb1_vbus_reg: regulator-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
+
+	usb3_vbus_reg: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
+
+	sys_3v3_reg: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3,vdd_3v3_alw";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
+
+	sys_3v3_pexs_reg: regulator-pexs {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3_pexs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_5v0_hdmi: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_5V_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-beaver",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "NVIDIA Tegra Beaver";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/nvidia/tegra30-cardhu-a02.dts
new file mode 100644
index 0000000000000..247185314f469
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-cardhu-a02.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-cardhu.dtsi"
+
+/* This dts file support the cardhu A02 version of board */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
+	compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
+
+	mmc@78000400 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	ddr_reg: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	sys_3v3_reg: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb1_vbus_reg: regulator-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	usb3_vbus_reg: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	vdd_5v0_reg: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_bl_reg: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/nvidia/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/nvidia/tegra30-cardhu-a04.dts
new file mode 100644
index 0000000000000..2911f08863a06
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-cardhu-a04.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-cardhu.dtsi"
+
+/* This dts file support the cardhu A04 and later versions of board */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
+	compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
+
+	mmc@78000400 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	ddr_reg: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	sys_3v3_reg: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb1_vbus_reg: regulator-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	usb3_vbus_reg: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	vdd_5v0_reg: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_bl_reg: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_bl2_reg: regulator-bl2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-cardhu.dtsi b/arch/arm/boot/dts/nvidia/tegra30-cardhu.dtsi
new file mode 100644
index 0000000000000..37a9c5a0ca303
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-cardhu.dtsi
@@ -0,0 +1,711 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/**
+ * This file contains common DT entry for all fab version of Cardhu.
+ * There is multiple fab version of Cardhu starting from A01 to A07.
+ * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
+ * A02 will have different sets of GPIOs for fixed regulator compare to
+ * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
+ * compatible with fab version A04. Based on Cardhu fab version, the
+ * related dts file need to be chosen like for Cardhu fab version A02,
+ * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
+ * tegra30-cardhu-a04.dts.
+ * The identification of board is done in two ways, by looking the sticker
+ * on PCB and by reading board id eeprom.
+ * The sticker will have number like 600-81291-1000-002 C.3. In this 4th
+ * number is the fab version like here it is 002 and hence fab version A02.
+ * The (downstream internal) U-Boot of Cardhu display the board-id as
+ * follows:
+ * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
+ * In this Fab version is 02 i.e. A02.
+ * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
+ * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
+ * wide.
+ */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu evaluation board";
+	compatible = "nvidia,cardhu", "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps65911@2d";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	pcie@3000 {
+		status = "okay";
+
+		/* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
+		avdd-pexb-supply = <&ldo1_reg>;
+		vdd-pexb-supply = <&ldo1_reg>;
+		avdd-pex-pll-supply = <&ldo1_reg>;
+		hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
+		vddio-pex-ctl-supply = <&sys_3v3_reg>;
+		avdd-plle-supply = <&ldo2_reg>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins =	"sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins =	"sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins =	"dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins =	"uart3_txd_pw6",
+						"uart3_cts_n_pa1",
+						"uart3_rts_n_pc0",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	panelddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* ALS and Proximity sensor */
+		isl29028@44 {
+			compatible = "isil,isl29028";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2cmux@70 {
+			compatible = "nxp,pca9546";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x70>;
+			reset-gpios = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_ac_bat_reg>;
+			vcc2-supply = <&vdd_ac_bat_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&vdd_5v0_reg>;
+			vcc5-supply = <&vdd_ac_bat_reg>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_ac_bat_reg>;
+			vccio-supply = <&vdd_ac_bat_reg>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "vdd_1v5_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+				};
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&sys_3v3_reg>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: tps62361@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-coupled-with = <&vddctrl_reg>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		flash@1 {
+			compatible = "winbond,w25q32", "jedec,spi-nor";
+			reg = <1>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	mmc@78000000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		vbus-supply = <&usb3_vbus_reg>;
+		status = "okay";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			interrupt-parent = <&pmic>;
+			interrupts = <2 0>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
+	panel: panel {
+		compatible = "chunghwa,claa101wb01";
+		ddc-i2c-bus = <&panelddc>;
+
+		power-supply = <&vdd_pnl1_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	vdd_ac_bat_reg: regulator-acbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	cam_1v8_reg: regulator-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vio_reg>;
+	};
+
+	cp_5v_reg: regulator-5v0cp {
+		compatible = "regulator-fixed";
+		regulator-name = "cp_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	emmc_3v3_reg: regulator-emmc {
+		compatible = "regulator-fixed";
+		regulator-name = "emmc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	modem_3v3_reg: regulator-modem {
+		compatible = "regulator-fixed";
+		regulator-name = "modem_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	pex_hvdd_3v3_reg: regulator-pex {
+		compatible = "regulator-fixed";
+		regulator-name = "pex_hvdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_cam1_ldo_reg: regulator-cam1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_cam1_ldo";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_cam2_ldo_reg: regulator-cam2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_cam2_ldo";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_cam3_ldo_reg: regulator-cam3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_cam3_ldo";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_com_reg: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_fuse_3v3_reg: regulator-fuse {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fuse_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_pnl1_reg: regulator-pnl1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_vid_reg: regulator-vid {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_vid";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-cardhu",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Cardhu";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip0: cpu-alert0 {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: cpu-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/nvidia/tegra30-colibri-eval-v3.dts
new file mode 100644
index 0000000000000..36615c5fda2cb
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-colibri-eval-v3.dts
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri T30 on Colibri Evaluation Board";
+	compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30",
+		     "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@2d";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	/* Colibri UART-A */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Colibri UART-C */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Colibri UART-B */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/* CAM_I2C (I2C3): unused */
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Colibri SSP */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			/* CAN_INT */
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+			vdd-supply = <&reg_3v3>;
+			xceiver-supply = <&reg_5v0>;
+		};
+	};
+
+	/* SD/MMC */
+	mmc@78000200 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+		no-1-8-v;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbc_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 128 64 32 16 8 4 0>;
+		default-brightness-level = <6>;
+		/* BL_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* PWM<A> */
+	};
+
+	clk16m: clock-osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			label = "SODIMM pin 45 wakeup";
+			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbc_vbus: regulator-usbc-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_PEN resp. USB_P_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
new file mode 100644
index 0000000000000..ed6106f1bea11
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
@@ -0,0 +1,1064 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Colibri T30 Module Device Tree
+ * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E, V1.1F; IT: V1.1A, V1.1B
+ */
+/ {
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+		};
+	};
+
+	gpio: gpio@6000d000 {
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET#";
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			clk1-out-pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-fs-pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_sclk_pp3",
+					      "dap3_din_pp1",
+					      "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri Address/Data Bus (GMI) */
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad4_pg4",
+					      "gmi_ad5_pg5",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_ad8_ph0",
+					      "gmi_ad9_ph1",
+					      "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad12_ph4",
+					      "gmi_ad13_ph5",
+					      "gmi_ad14_ph6",
+					      "gmi_ad15_ph7",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1",
+					      "gmi_cs4_n_pk2",
+					      "gmi_cs2_n_pk3",
+					      "gmi_iordy_pi5",
+					      "gmi_oe_n_pi1",
+					      "gmi_wait_pi7",
+					      "gmi_wr_n_pi0",
+					      "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3",
+					      "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5",
+					      "spi1_sck_px5",
+					      "spi1_mosi_px4",
+					      "spi1_cs0_n_px6",
+					      "spi2_cs0_n_px3",
+					      "spi2_miso_px1",
+					      "spi2_mosi_px0",
+					      "spi2_sck_px2",
+					      "uart2_cts_n_pj5",
+					      "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Further pins may be used as GPIOs */
+			dap4-din-pp5 {
+				nvidia,pins = "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_fs_pp4",
+					      "dap4_sclk_pp7",
+					      "pbb7",
+					      "sdmmc1_clk_pz0",
+					      "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat3_py4",
+					      "uart3_cts_n_pa1",
+					      "uart3_txd_pw6",
+					      "uart3_rxd_pw7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-d18-pm2 {
+				nvidia,pins = "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_dc0_pn6",
+					      "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-cs0-n-pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4",
+					      "lcd_sdin_pz2",
+					      "pu0",
+					      "pu1",
+					      "pu2",
+					      "pu3",
+					      "pu4",
+					      "pu5",
+					      "pu6",
+					      "spi1_miso_px7",
+					      "uart3_rts_n_pc0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_sck_pz4",
+					      "lcd_sdout_pn5",
+					      "lcd_wr_n_pz3";
+				nvidia,function = "hdcp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4",
+					      "pbb5",
+					      "pbb6";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed RDnWR and therefore disabled */
+			lcd-cs1-n-pw0 {
+				nvidia,pins = "lcd_cs1_n_pw0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* Multiplexed GMI_CLK and therefore disabled */
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* Tri-stating GMI_WR_N on nPWE SODIMM pin 99 */
+			sdmmc3-dat4-pd1 {
+				nvidia,pins = "sdmmc3_dat4_pd1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* Not tri-stating GMI_WR_N on RDnWR SODIMM pin 93 */
+			sdmmc3-dat5-pd0 {
+				nvidia,pins = "sdmmc3_dat5_pd0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri BL_ON */
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri Backlight PWM<A> */
+			sdmmc3-dat3-pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri CAN_INT */
+			kb-row8-ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri DDC */
+			ddc-scl-pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri EXT_IO* */
+			gen2-i2c-scl-pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spdif-in-pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri GPIO */
+			clk2-out-pw5 {
+				nvidia,pins = "clk2_out_pw5",
+					      "pcc2",
+					      "pv3",
+					      "sdmmc1_dat2_py5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-pwr1-pc1 {
+				nvidia,pins = "lcd_pwr1_pc1",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri HOTPLUG_DETECT (HDMI) */
+			hdmi-int-pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri I2C */
+			gen1-i2c-scl-pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri LCD (L_* resp. LDD<*>) */
+			lcd-d0-pe0 {
+				nvidia,pins = "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_pclk_pb3",
+					      "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/*
+			 * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
+			 * today's display need DE, disable LCD_M1
+			 */
+			lcd-m1-pw1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri MMC */
+			kb-row10-ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row11-ps3 {
+				nvidia,pins = "kb_row11_ps3",
+					      "kb_row12_ps4",
+					      "kb_row13_ps5",
+					      "kb_row14_ps6",
+					      "kb_row15_ps7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Colibri MMC_CD */
+			gmi-wp-n-pc7 {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			cam-mclk-pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam-i2c-scl-pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0",
+					      "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri nRESET_OUT */
+			gmi-rst-n-pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * Colibri Parallel Camera (Optional)
+			 * pins multiplexed with others and therefore disabled
+			 */
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_d0_pt4",
+					      "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d4_pl2",
+					      "vi_d5_pl3",
+					      "vi_d6_pl4",
+					      "vi_d7_pl5",
+					      "vi_d8_pl6",
+					      "vi_d9_pl7",
+					      "vi_d10_pt2",
+					      "vi_d11_pt3",
+					      "vi_hsync_pd7",
+					      "vi_mclk_pt1",
+					      "vi_pclk_pt0",
+					      "vi_vsync_pd6";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri PWM<B> */
+			sdmmc3-dat2-pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri PWM<C> */
+			sdmmc3-clk-pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri PWM<D> */
+			sdmmc3-cmd-pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri SSP */
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Multiplexed SSPFRM, SSPTXD and therefore disabled */
+			sdmmc3-dat6-pd3 {
+				nvidia,pins = "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri UART-A */
+			ulpi-data0 {
+				nvidia,pins = "ulpi_data0_po1",
+					      "ulpi_data1_po2",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data5_po6",
+					      "ulpi_data6_po7",
+					      "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri UART-B */
+			gmi-a16-pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+					      "gmi_a17_pb0",
+					      "gmi_a18_pb1",
+					      "gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri UART-C */
+			uart2-rxd {
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri USBC_DET */
+			spdif-out-pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri USBH_PEN */
+			spi2-cs1-n-pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri USBH_OC */
+			spi2-cs2-n-pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri VGA not supported and therefore disabled */
+			crt-hsync-pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* eMMC (On-module) */
+			sdmmc4-clk-pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4",
+					      "sdmmc4_cmd_pt7",
+					      "sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat0-paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LAN_EXT_WAKEUP#, LAN_PME (On-module) */
+			pex-l0-rst-n-pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1",
+					      "pex_wake_n_pdd3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* LAN_V_BUS, LAN_RESET# (On-module) */
+			pex-l0-clkreq-n-pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2",
+					      "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* nBATT_FAULT(SENSE), nVDD_FAULT(SENSE) */
+			pex-l2-rst-n-pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+					      "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Not connected and therefore disabled */
+			clk1-req-pee2 {
+				nvidia,pins = "clk1_req_pee2",
+					      "pex_l1_prsnt_n_pdd4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+					      "clk3_out_pee0",
+					      "clk3_req_pee1",
+					      "clk_32k_out_pa0",
+					      "hdmi_cec_pee3",
+					      "sys_clk_req_pz5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-dqs-pi2 {
+				nvidia,pins = "gmi_dqs_pi2",
+					      "kb_col2_pq2",
+					      "kb_col3_pq3",
+					      "kb_col4_pq4",
+					      "kb_col5_pq5",
+					      "kb_row4_pr4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_col1_pq1",
+					      "kb_col6_pq6",
+					      "kb_col7_pq7",
+					      "kb_row5_pr5",
+					      "kb_row6_pr6",
+					      "kb_row7_pr7",
+					      "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0",
+					      "kb_row1_pr1",
+					      "kb_row2_pr2",
+					      "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-pwr2-pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "hdcp";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Power I2C (On-module) */
+			pwr-i2c-scl-pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
+			 * temperature sensor therefore requires disabling for
+			 * now
+			 */
+			lcd-dc1-pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* TOUCH_PEN_INT# (On-module) */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		clock-frequency = <10000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller (On-module)
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			#sound-dai-cells = <0>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vio>;
+			VDDIO-supply = <&reg_module_3v3>;
+			clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&reg_module_3v3>;
+			vcc2-supply = <&reg_module_3v3>;
+			vcc3-supply = <&reg_1v8_vio>;
+			vcc4-supply = <&reg_module_3v3>;
+			vcc5-supply = <&reg_module_3v3>;
+			vcc6-supply = <&reg_1v8_vio>;
+			vcc7-supply = <&reg_5v0_charge_pump>;
+			vccio-supply = <&reg_module_3v3>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "+V1.35_VDDIO_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				/* SW2: unused */
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "+V1.0_VDD_CPU";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				reg_1v8_vio: vio {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* LDO1: unused */
+
+				/*
+				 * EN_+V3.3 switching via FET:
+				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
+				 * see also +V3.3 fixed supply
+				 */
+				ldo2_reg: ldo2 {
+					regulator-name = "EN_+V3.3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* LDO3: unused */
+
+				ldo4_reg: ldo4 {
+					regulator-name = "+V1.2_VDD_RTC";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V2.8_AVDD_VDAC:
+				 * only required for (unsupported) analog RGB
+				 */
+				ldo5_reg: ldo5 {
+					regulator-name = "+V2.8_AVDD_VDAC";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+				 * but LDO6 can't set voltage in 50mV
+				 * granularity
+				 */
+				ldo6_reg: ldo6 {
+					regulator-name = "+V1.05_AVDD_PLLE";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "+V1.2_AVDD_PLL";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "+V1.0_VDD_DDR_HS";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/* STMPE811 touch screen controller */
+		touchscreen@41 {
+			compatible = "st,stmpe811";
+			reg = <0x41>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			interrupt-controller;
+			id = <0>;
+			blocks = <0x5>;
+			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+			/* forbid to use ADC channels 3-0 (touch) */
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				st,norequest-mask = <0x0F>;
+			};
+
+			stmpe_touchscreen {
+				compatible = "st,stmpe-ts";
+				/* 8 sample average control */
+				st,ave-ctrl = <3>;
+				/* 7 length fractional part in z */
+				st,fraction-z = <7>;
+				/*
+				 * 50 mA typical 80 mA max touchscreen drivers
+				 * current limit value
+				 */
+				st,i-drive = <1>;
+				/* 1 ms panel driver settling time */
+				st,settling = <3>;
+				/* 5 ms touch detect interrupt delay */
+				st,touch-det-delay = <5>;
+			};
+		};
+
+		/*
+		 * LM95245 temperature sensor
+		 * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
+		 */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+
+		/* SW: +V1.2_VDD_CORE */
+		vdd_core: regulator@60 {
+			compatible = "ti,tps62362";
+			reg = <0x60>;
+
+			regulator-name = "tps62362-vout";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-coupled-with = <&vddctrl_reg>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		/* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x1>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080500 {
+			status = "okay";
+		};
+	};
+
+	/* eMMC */
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vio>; /* VCCQ */
+		mmc-ddr-1_8v;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> AX88772B (On-module) */
+	usb@7d004000 {
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet@1 {
+			compatible = "usbb95,772b";
+			reg = <1>;
+			local-mac-address = [00 00 00 00 00 00];
+		};
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_lan_v_bus>;
+	};
+
+	clk32k_in: clock-xtal1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.8_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_1v8_vio>;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_5v0_charge_pump: regulator-5v0-charge-pump {
+		compatible = "regulator-fixed";
+		regulator-name = "+V5.0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_lan_v_bus: regulator-lan-v-bus {
+		compatible = "regulator-fixed";
+		regulator-name = "LAN_V_BUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-colibri_t30",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Colibri T30";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/nvidia/tegra30-cpu-opp-microvolt.dtsi
new file mode 100644
index 0000000000000..b8e0e91170212
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-cpu-opp-microvolt.dtsi
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpu0_opp_table: opp-table-cpu0 {
+		opp-51000000-800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp-51000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-51000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-102000000-800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp-102000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-102000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-204000000-800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp-204000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-204000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-312000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-312000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-340000000-800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp-340000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-370000000-800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp-456000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-456000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-475000000-800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp-475000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-608000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-608000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-620000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-640000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-640000000-900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp-760000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-760000000-900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp-760000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-760000000-975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp-816000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-816000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-860000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-860000000-900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp-860000000-975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp-860000000-1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp-910000000-900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp-1000000000-900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp-1000000000-975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp-1000000000-1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp-1000000000-1025 {
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+
+		opp-1100000000-900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp-1100000000-975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp-1100000000-1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp-1100000000-1025 {
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+
+		opp-1100000000-1075 {
+			opp-microvolt = <1075000 1075000 1250000>;
+		};
+
+		opp-1150000000-975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp-1200000000-975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp-1200000000-1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp-1200000000-1025 {
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+
+		opp-1200000000-1050 {
+			opp-microvolt = <1050000 1050000 1250000>;
+		};
+
+		opp-1200000000-1075 {
+			opp-microvolt = <1075000 1075000 1250000>;
+		};
+
+		opp-1200000000-1100 {
+			opp-microvolt = <1100000 1100000 1250000>;
+		};
+
+		opp-1300000000-1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp-1300000000-1025 {
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+
+		opp-1300000000-1050 {
+			opp-microvolt = <1050000 1050000 1250000>;
+		};
+
+		opp-1300000000-1075 {
+			opp-microvolt = <1075000 1075000 1250000>;
+		};
+
+		opp-1300000000-1100 {
+			opp-microvolt = <1100000 1100000 1250000>;
+		};
+
+		opp-1300000000-1125 {
+			opp-microvolt = <1125000 1125000 1250000>;
+		};
+
+		opp-1300000000-1150 {
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+
+		opp-1300000000-1175 {
+			opp-microvolt = <1175000 1175000 1250000>;
+		};
+
+		opp-1400000000-1100 {
+			opp-microvolt = <1100000 1100000 1250000>;
+		};
+
+		opp-1400000000-1125 {
+			opp-microvolt = <1125000 1125000 1250000>;
+		};
+
+		opp-1400000000-1150 {
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+
+		opp-1400000000-1175 {
+			opp-microvolt = <1175000 1175000 1250000>;
+		};
+
+		opp-1400000000-1237 {
+			opp-microvolt = <1237000 1237000 1250000>;
+		};
+
+		opp-1500000000-1125 {
+			opp-microvolt = <1125000 1125000 1250000>;
+		};
+
+		opp-1500000000-1150 {
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+
+		opp-1500000000-1200 {
+			opp-microvolt = <1200000 1200000 1250000>;
+		};
+
+		opp-1500000000-1237 {
+			opp-microvolt = <1237000 1237000 1250000>;
+		};
+
+		opp-1600000000-1212 {
+			opp-microvolt = <1212000 1212000 1250000>;
+		};
+
+		opp-1600000000-1237 {
+			opp-microvolt = <1237000 1237000 1250000>;
+		};
+
+		opp-1700000000-1212 {
+			opp-microvolt = <1212000 1212000 1250000>;
+		};
+
+		opp-1700000000-1237 {
+			opp-microvolt = <1237000 1237000 1250000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-cpu-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra30-cpu-opp.dtsi
new file mode 100644
index 0000000000000..5b9ebb75a09f8
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-cpu-opp.dtsi
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-51000000-800 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x31FE>;
+			opp-hz = /bits/ 64 <51000000>;
+		};
+
+		opp-51000000-850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0C01>;
+			opp-hz = /bits/ 64 <51000000>;
+		};
+
+		opp-51000000-912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <51000000>;
+		};
+
+		opp-102000000-800 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x31FE>;
+			opp-hz = /bits/ 64 <102000000>;
+		};
+
+		opp-102000000-850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0C01>;
+			opp-hz = /bits/ 64 <102000000>;
+		};
+
+		opp-102000000-912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <102000000>;
+		};
+
+		opp-204000000-800 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x31FE>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-suspend;
+		};
+
+		opp-204000000-850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0C01>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-suspend;
+		};
+
+		opp-204000000-912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-suspend;
+		};
+
+		opp-312000000-850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0C00>;
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp-312000000-912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp-340000000-800 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0192>;
+			opp-hz = /bits/ 64 <340000000>;
+		};
+
+		opp-340000000-850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x0F 0x0001>;
+			opp-hz = /bits/ 64 <340000000>;
+		};
+
+		opp-370000000-800 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1E 0x306C>;
+			opp-hz = /bits/ 64 <370000000>;
+		};
+
+		opp-456000000-850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0C00>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		opp-456000000-912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		opp-475000000-800 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1E 0x31FE>;
+			opp-hz = /bits/ 64 <475000000>;
+		};
+
+		opp-475000000-850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x0F 0x0001>, <0x01 0x0002>,
+					   <0x01 0x0010>, <0x01 0x0080>,
+					   <0x01 0x0100>;
+			opp-hz = /bits/ 64 <475000000>;
+		};
+
+		opp-608000000-850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0400>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp-608000000-912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp-620000000-850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1E 0x306C>;
+			opp-hz = /bits/ 64 <620000000>;
+		};
+
+		opp-640000000-850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x0F 0x0001>, <0x02 0x0002>,
+					   <0x04 0x0002>, <0x08 0x0002>,
+					   <0x02 0x0010>, <0x04 0x0010>,
+					   <0x08 0x0010>, <0x02 0x0080>,
+					   <0x04 0x0080>, <0x08 0x0080>,
+					   <0x10 0x0080>, <0x02 0x0100>,
+					   <0x04 0x0100>, <0x08 0x0100>,
+					   <0x10 0x0100>;
+			opp-hz = /bits/ 64 <640000000>;
+		};
+
+		opp-640000000-900 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0192>;
+			opp-hz = /bits/ 64 <640000000>;
+		};
+
+		opp-760000000-850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1E 0x3461>, <0x08 0x0002>,
+					   <0x08 0x0004>, <0x08 0x0008>,
+					   <0x08 0x0010>, <0x08 0x0080>,
+					   <0x10 0x0080>, <0x08 0x0100>,
+					   <0x10 0x0100>, <0x01 0x0400>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp-760000000-900 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0001>, <0x02 0x0002>,
+					   <0x04 0x0002>, <0x02 0x0004>,
+					   <0x04 0x0004>, <0x02 0x0008>,
+					   <0x04 0x0008>, <0x02 0x0010>,
+					   <0x04 0x0010>, <0x02 0x0080>,
+					   <0x04 0x0080>, <0x02 0x0100>,
+					   <0x04 0x0100>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp-760000000-912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp-760000000-975 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0192>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp-816000000-850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0400>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp-816000000-912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp-860000000-850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x0C 0x0001>;
+			opp-hz = /bits/ 64 <860000000>;
+		};
+
+		opp-860000000-900 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x0001>, <0x04 0x0002>,
+					   <0x08 0x0002>, <0x04 0x0004>,
+					   <0x08 0x0004>, <0x04 0x0008>,
+					   <0x08 0x0008>, <0x04 0x0010>,
+					   <0x08 0x0010>, <0x04 0x0080>,
+					   <0x08 0x0080>, <0x10 0x0080>,
+					   <0x04 0x0100>, <0x08 0x0100>,
+					   <0x10 0x0100>;
+			opp-hz = /bits/ 64 <860000000>;
+		};
+
+		opp-860000000-975 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0001>, <0x02 0x0002>,
+					   <0x02 0x0004>, <0x02 0x0008>,
+					   <0x02 0x0010>, <0x02 0x0080>,
+					   <0x02 0x0100>;
+			opp-hz = /bits/ 64 <860000000>;
+		};
+
+		opp-860000000-1000 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0192>;
+			opp-hz = /bits/ 64 <860000000>;
+		};
+
+		opp-910000000-900 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x18 0x3060>;
+			opp-hz = /bits/ 64 <910000000>;
+		};
+
+		opp-1000000000-900 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x0C 0x0001>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp-1000000000-975 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x03 0x0001>, <0x04 0x0002>,
+					   <0x08 0x0002>, <0x04 0x0004>,
+					   <0x08 0x0004>, <0x04 0x0008>,
+					   <0x08 0x0008>, <0x04 0x0010>,
+					   <0x08 0x0010>, <0x04 0x0080>,
+					   <0x08 0x0080>, <0x10 0x0080>,
+					   <0x04 0x0100>, <0x08 0x0100>,
+					   <0x10 0x0100>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp-1000000000-1000 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x019E>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp-1000000000-1025 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0192>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp-1100000000-900 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x08 0x0001>;
+			opp-hz = /bits/ 64 <1100000000>;
+		};
+
+		opp-1100000000-975 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x06 0x0001>, <0x08 0x0002>,
+					   <0x08 0x0004>, <0x08 0x0008>,
+					   <0x08 0x0010>, <0x08 0x0080>,
+					   <0x10 0x0080>, <0x08 0x0100>,
+					   <0x10 0x0100>;
+			opp-hz = /bits/ 64 <1100000000>;
+		};
+
+		opp-1100000000-1000 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0001>, <0x04 0x0002>,
+					   <0x04 0x0004>, <0x04 0x0008>,
+					   <0x04 0x0010>, <0x04 0x0080>,
+					   <0x04 0x0100>;
+			opp-hz = /bits/ 64 <1100000000>;
+		};
+
+		opp-1100000000-1025 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x019E>;
+			opp-hz = /bits/ 64 <1100000000>;
+		};
+
+		opp-1100000000-1075 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0192>;
+			opp-hz = /bits/ 64 <1100000000>;
+		};
+
+		opp-1150000000-975 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x18 0x3060>;
+			opp-hz = /bits/ 64 <1150000000>;
+		};
+
+		opp-1200000000-975 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x08 0x0001>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp-1200000000-1000 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x04 0x0001>, <0x08 0x0002>,
+					   <0x08 0x0004>, <0x08 0x0008>,
+					   <0x08 0x0010>, <0x08 0x0080>,
+					   <0x10 0x0080>, <0x08 0x0100>,
+					   <0x10 0x0100>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp-1200000000-1025 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x0001>, <0x04 0x0002>,
+					   <0x04 0x0004>, <0x04 0x0008>,
+					   <0x04 0x0010>, <0x04 0x0080>,
+					   <0x04 0x0100>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp-1200000000-1050 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x019E>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp-1200000000-1075 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0001>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp-1200000000-1100 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0192>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp-1300000000-1000 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x08 0x0001>, <0x10 0x0080>,
+					   <0x10 0x0100>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp-1300000000-1025 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x04 0x0001>, <0x08 0x0002>,
+					   <0x08 0x0080>, <0x08 0x0100>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp-1300000000-1050 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x12 0x3061>, <0x04 0x0002>,
+					   <0x08 0x0004>, <0x08 0x0008>,
+					   <0x08 0x0010>, <0x08 0x0020>,
+					   <0x08 0x0040>, <0x04 0x0080>,
+					   <0x04 0x0100>, <0x08 0x1000>,
+					   <0x08 0x2000>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp-1300000000-1075 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x0182>, <0x04 0x0004>,
+					   <0x04 0x0008>, <0x04 0x0010>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp-1300000000-1100 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x001C>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp-1300000000-1125 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0001>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp-1300000000-1150 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0182>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp-1300000000-1175 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0010>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp-1400000000-1100 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x18 0x307C>;
+			opp-hz = /bits/ 64 <1400000000>;
+		};
+
+		opp-1400000000-1125 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x04 0x000C>;
+			opp-hz = /bits/ 64 <1400000000>;
+		};
+
+		opp-1400000000-1150 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x000C>, <0x04 0x0010>;
+			opp-hz = /bits/ 64 <1400000000>;
+		};
+
+		opp-1400000000-1175 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x0010>;
+			opp-hz = /bits/ 64 <1400000000>;
+		};
+
+		opp-1400000000-1237 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0010>;
+			opp-hz = /bits/ 64 <1400000000>;
+		};
+
+		opp-1500000000-1125 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x08 0x0010>, <0x10 0x0020>,
+					   <0x10 0x0040>, <0x10 0x1000>,
+					   <0x10 0x2000>;
+			opp-hz = /bits/ 64 <1500000000>;
+		};
+
+		opp-1500000000-1150 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x04 0x0010>, <0x08 0x0020>,
+					   <0x08 0x0040>, <0x08 0x1000>,
+					   <0x08 0x2000>;
+			opp-hz = /bits/ 64 <1500000000>;
+		};
+
+		opp-1500000000-1200 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x0010>;
+			opp-hz = /bits/ 64 <1500000000>;
+		};
+
+		opp-1500000000-1237 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0010>;
+			opp-hz = /bits/ 64 <1500000000>;
+		};
+
+		opp-1600000000-1212 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x10 0x3060>;
+			opp-hz = /bits/ 64 <1600000000>;
+		};
+
+		opp-1600000000-1237 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x08 0x3060>;
+			opp-hz = /bits/ 64 <1600000000>;
+		};
+
+		opp-1700000000-1212 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x10 0x3060>;
+			opp-hz = /bits/ 64 <1700000000>;
+		};
+
+		opp-1700000000-1237 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x08 0x3060>;
+			opp-hz = /bits/ 64 <1700000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-ouya.dts b/arch/arm/boot/dts/nvidia/tegra30-ouya.dts
new file mode 100644
index 0000000000000..eef27c82987b3
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-ouya.dts
@@ -0,0 +1,4795 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "Ouya Game Console";
+	compatible = "ouya,ouya", "nvidia,tegra30";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* WiFi */
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd; /* Debug Port */
+		serial1 = &uartc; /* Bluetooth */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <0x0>;
+			tlm,version-minor = <0x0>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@bfdf0000 {
+			compatible = "ramoops";
+			reg = <0xbfdf0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+			vdd-supply = <&vdd_vid_reg>;
+			pll-supply = <&ldo7_reg>;
+			hdmi-supply = <&sys_3v3_reg>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_a18_pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pclk_pb3 {
+				nvidia,pins = "lcd_pclk_pb3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pwr1_pc1 {
+				nvidia,pins = "lcd_pwr1_pc1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat5_pd0 {
+				nvidia,pins = "sdmmc3_dat5_pd0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat4_pd1 {
+				nvidia,pins = "sdmmc3_dat4_pd1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat6_pd3 {
+				nvidia,pins = "sdmmc3_dat6_pd3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat7_pd4 {
+				nvidia,pins = "sdmmc3_dat7_pd4";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_hsync_pd7 {
+				nvidia,pins = "vi_hsync_pd7";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_d0_pe0 {
+				nvidia,pins = "lcd_d0_pe0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d1_pe1 {
+				nvidia,pins = "lcd_d1_pe1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d2_pe2 {
+				nvidia,pins = "lcd_d2_pe2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d3_pe3 {
+				nvidia,pins = "lcd_d3_pe3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d4_pe4 {
+				nvidia,pins = "lcd_d4_pe4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d5_pe5 {
+				nvidia,pins = "lcd_d5_pe5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d6_pe6 {
+				nvidia,pins = "lcd_d6_pe6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d7_pe7 {
+				nvidia,pins = "lcd_d7_pe7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d8_pf0 {
+				nvidia,pins = "lcd_d8_pf0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d9_pf1 {
+				nvidia,pins = "lcd_d9_pf1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d10_pf2 {
+				nvidia,pins = "lcd_d10_pf2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d11_pf3 {
+				nvidia,pins = "lcd_d11_pf3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d12_pf4 {
+				nvidia,pins = "lcd_d12_pf4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d13_pf5 {
+				nvidia,pins = "lcd_d13_pf5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d14_pf6 {
+				nvidia,pins = "lcd_d14_pf6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d15_pf7 {
+				nvidia,pins = "lcd_d15_pf7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad1_pg1 {
+				nvidia,pins = "gmi_ad1_pg1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad3_pg3 {
+				nvidia,pins = "gmi_ad3_pg3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad4_pg4 {
+				nvidia,pins = "gmi_ad4_pg4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad7_pg7 {
+				nvidia,pins = "gmi_ad7_pg7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad8_ph0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad14_ph6 {
+				nvidia,pins = "gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wr_n_pi0 {
+				nvidia,pins = "gmi_wr_n_pi0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_oe_n_pi1 {
+				nvidia,pins = "gmi_oe_n_pi1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_dqs_pi2 {
+				nvidia,pins = "gmi_dqs_pi2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs7_n_pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wait_pi7 {
+				nvidia,pins = "gmi_wait_pi7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_de_pj1 {
+				nvidia,pins = "lcd_de_pj1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_hsync_pj3 {
+				nvidia,pins = "lcd_hsync_pj3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_vsync_pj4 {
+				nvidia,pins = "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_clk_pk1 {
+				nvidia,pins = "gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs2_n_pk3 {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs3_n_pk4 {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d2_pl0 {
+				nvidia,pins = "vi_d2_pl0";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d3_pl1 {
+				nvidia,pins = "vi_d3_pl1";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d5_pl3 {
+				nvidia,pins = "vi_d5_pl3";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d7_pl5 {
+				nvidia,pins = "vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d9_pl7 {
+				nvidia,pins = "vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d16_pm0 {
+				nvidia,pins = "lcd_d16_pm0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d17_pm1 {
+				nvidia,pins = "lcd_d17_pm1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d18_pm2 {
+				nvidia,pins = "lcd_d18_pm2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d19_pm3 {
+				nvidia,pins = "lcd_d19_pm3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d20_pm4 {
+				nvidia,pins = "lcd_d20_pm4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d21_pm5 {
+				nvidia,pins = "lcd_d21_pm5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d22_pm6 {
+				nvidia,pins = "lcd_d22_pm6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d23_pm7 {
+				nvidia,pins = "lcd_d23_pm7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_cs0_n_pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_sdout_pn5 {
+				nvidia,pins = "lcd_sdout_pn5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_dc0_pn6 {
+				nvidia,pins = "lcd_dc0_pn6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d11_pt3 {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d0_pt4 {
+				nvidia,pins = "vi_d0_pt4";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag_rtck_pu7 {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "clk_12m_out";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_vsync_pv7 {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_cs1_n_pw0 {
+				nvidia,pins = "lcd_cs1_n_pw0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_m1_pw1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_sck_px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_cs0_n_px6 {
+				nvidia,pins = "spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_sdin_pz2 {
+				nvidia,pins = "lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_wr_n_pz3 {
+				nvidia,pins = "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_sck_pz4 {
+				nvidia,pins = "lcd_sck_pz4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_rst_n_pcc3 {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_rst_n_pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_clkreq_n_pcc7 {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l0_prsnt_n_pdd0 {
+				nvidia,pins = "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l1_prsnt_n_pdd4 {
+				nvidia,pins = "pex_l1_prsnt_n_pdd4";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_prsnt_n_pdd7 {
+				nvidia,pins = "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			drive_groups {
+				nvidia,pins = "drive_gma",
+					      "drive_gmb",
+					      "drive_gmc",
+					      "drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* Azurewave AW-NH660 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			vbat-supply  = <&sys_3v3_reg>;
+			vddio-supply = <&vdd_1v8>;
+
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	uartd: serial@70006300 {
+		status = "okay";
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 1 1 1 1 1 0 0 1>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_reg>;
+			vcc2-supply = <&vdd_5v0_reg>;
+			vcc3-supply = <&vdd_1v8>;
+			vcc4-supply = <&vdd_5v0_reg>;
+			vcc5-supply = <&vdd_5v0_reg>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_5v0_reg>;
+			vccio-supply = <&vdd_5v0_reg>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "vdd_1v5_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1270000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		cpu_temp: nct1008@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&sys_3v3_reg>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: tps62361@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+			ti,enable-vout-discharge;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>; /* Samsung RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emem-configuration = <
+					0x00030003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emem-configuration = <
+					0x00010003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74630303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emem-configuration = <
+					0x00000006 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emem-configuration = <
+					0x0000000c /* MC_EMEM_ARB_CFG */
+					0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7086120a /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emem-configuration = <
+					0x00000018 /* MC_EMEM_ARB_CFG */
+					0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x712c2414 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>; /* Hynix M RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emem-configuration = <
+					0x00030003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emem-configuration = <
+					0x00010003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74630303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emem-configuration = <
+					0x00000006 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emem-configuration = <
+					0x0000000c /* MC_EMEM_ARB_CFG */
+					0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7086120a /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emem-configuration = <
+					0x00000018 /* MC_EMEM_ARB_CFG */
+					0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x712c2414 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-2 {
+			nvidia,ram-code = <2>; /* Hynix A RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emem-configuration = <
+					0x00030003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75e30303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emem-configuration = <
+					0x00010003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74e30303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x74430504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emem-configuration = <
+					0x00000006 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x74040a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emem-configuration = <
+					0x0000000c /* MC_EMEM_ARB_CFG */
+					0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7086120a /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emem-configuration = <
+					0x00000018 /* MC_EMEM_ARB_CFG */
+					0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x712c2414 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>;  /* Samsung RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000006 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000007 /* EMC_TXSR */
+					0x00000007 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x0000000d /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000e /* EMC_TXSR */
+					0x0000000e /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001a /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000001c /* EMC_TXSR */
+					0x0000001c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000035 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000038 /* EMC_TXSR */
+					0x00000038 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000066 /* EMC_RFC */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x00000bf0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000006c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000010 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c30 /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x001d0084 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS4 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS5 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS6 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0158000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000ce /* EMC_RFC */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000004 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001820 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000012 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000d8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000020 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000007 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001860 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf0070191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000800a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000a /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f0000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>;  /* Hynix M RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000006 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000007 /* EMC_TXSR */
+					0x00000007 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x0000000d /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000e /* EMC_TXSR */
+					0x0000000e /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001a /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000001c /* EMC_TXSR */
+					0x0000001c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000035 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000038 /* EMC_TXSR */
+					0x00000038 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000066 /* EMC_RFC */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x00000bf0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000006c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000010 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c30 /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x001d0084 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS4 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS5 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS6 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0158000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000ce /* EMC_RFC */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000004 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001820 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000012 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000d8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000020 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000007 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001860 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf0070191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000800a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000a /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f0000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-2 {
+			nvidia,ram-code = <2>;  /* Hynix A RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000007 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000008 /* EMC_TXSR */
+					0x00000008 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x0000000f /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000010 /* EMC_TXSR */
+					0x00000010 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001e /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000020 /* EMC_TXSR */
+					0x00000020 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x0000003d /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000040 /* EMC_TXSR */
+					0x00000040 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000076 /* EMC_RFC */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x00000bf0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000007c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000010 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c30 /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x001d0084 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00044000 /* EMC_DLL_XFORM_DQS0 */
+					0x00044000 /* EMC_DLL_XFORM_DQS1 */
+					0x00044000 /* EMC_DLL_XFORM_DQS2 */
+					0x00044000 /* EMC_DLL_XFORM_DQS3 */
+					0x00044000 /* EMC_DLL_XFORM_DQS4 */
+					0x00044000 /* EMC_DLL_XFORM_DQS5 */
+					0x00044000 /* EMC_DLL_XFORM_DQS6 */
+					0x00044000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00058000 /* EMC_DLL_XFORM_DQ0 */
+					0x00058000 /* EMC_DLL_XFORM_DQ1 */
+					0x00058000 /* EMC_DLL_XFORM_DQ2 */
+					0x00058000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0148000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000ee /* EMC_RFC */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001820 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000012 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000f8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000020 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000007 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001860 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf0070191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000c /* EMC_DLL_XFORM_DQS0 */
+					0x007fc00a /* EMC_DLL_XFORM_DQS1 */
+					0x00000008 /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000c /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x0a000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00d0000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&wifi_pwrseq>;
+		vmmc-supply = <&sdmmc_3v3_reg>;
+		vqmmc-supply = <&vdd_1v8>;
+
+		/* Azurewave AW-NH660 BCM4330 */
+		brcmf: wifi@1 {
+			reg = <1>;
+			compatible = "brcm,bcm4329-fmac";
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+
+		keep-power-in-suspend;
+		bus-width = <8>;
+		non-removable;
+		vmmc-supply = <&sys_3v3_reg>;
+		vqmmc-supply = <&vdd_1v8>;
+		nvidia,default-tap = <0x0F>;
+		max-frequency = <25500000>;
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb@7d004000 {
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet@2 { /* SMSC 10/100T Ethernet Controller */
+			compatible = "usb424,9e00";
+			reg = <2>;
+			local-mac-address = [00 11 22 33 44 55];
+		};
+	};
+
+	usb-phy@7d004000 {
+		vbus-supply = <&vdd_smsc>;
+		status = "okay";
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		vbus-supply = <&usb3_vbus_reg>;
+		status = "okay";
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-supply = <&vdd_cpu>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-supply = <&vdd_cpu>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-supply = <&vdd_cpu>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-supply = <&vdd_cpu>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	fan: fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio TEGRA_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0    0
+				      4500 1>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			debounce-interval = <10>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "power-led";
+			gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+			retain-state-suspended;
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-900000000-1350;
+	};
+
+	wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_12v_in: regulator-vdd-12v-in {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_12v_in";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	sdmmc_3v3_reg: regulator-sdmmc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_fuse_3v3_reg: regulator-vdd-fuse-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fuse_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+		regulator-always-on;
+	};
+
+	vdd_vid_reg: regulator-vdd-vid {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_vid";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v0_reg>;
+		regulator-boot-on;
+	};
+
+	ddr_reg: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		vin-supply = <&vdd_12v_in>;
+	};
+
+	sys_3v3_reg: regulator-sys-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_12v_in>;
+	};
+
+	vdd_5v0_reg: regulator-vdd-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_12v_in>;
+	};
+
+	vdd_smsc: regulator-vdd-smsc {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_smsc";
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	usb3_vbus_reg: regulator-usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay = <5000>;
+			polling-delay-passive = <5000>;
+
+			thermal-sensors = <&cpu_temp 1>;
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					temperature = <50000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu_alert1: cpu-alert1 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts b/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts
new file mode 100644
index 0000000000000..8d10eb8b48b95
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts
@@ -0,0 +1,2858 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Pegatron Chagall";
+	compatible = "pegatron,chagall", "nvidia,tegra30";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* uSD slot */
+		mmc2 = &sdmmc3; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display0 = &lcd;
+		display1 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@beb00000 {
+			compatible = "ramoops";
+			reg = <0xbeb00000 0x10000>; /* 64kB */
+			console-size = <0x8000>; /* 32kB */
+			record-size = <0x400>; /* 1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>; /* 2MB */
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5",
+						"vi_d2_pl0",
+						"vi_d3_pl1",
+						"vi_d5_pl3",
+						"vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6",
+						"vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat5_pd0",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			/* HDMI-CEC pinmux */
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			/* UART-A */
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-B */
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2",
+						"uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3",
+						"uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2S pinmux */
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex_l2_rst_n_pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+						"pex_l0_rst_n_pdd1",
+						"pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_clkreq_n_pcc7 {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+						"pex_l0_prsnt_n_pdd0",
+						"pex_l0_clkreq_n_pdd2",
+						"pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4",
+						"spi1_sck_px5",
+						"spi1_cs0_n_px6",
+						"spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2",
+						"spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_sck_px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pclk_pb3",
+						"lcd_pwr1_pc1",
+						"lcd_pwr2_pc6",
+						"lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7",
+						"lcd_cs0_n_pn4",
+						"lcd_sdout_pn5",
+						"lcd_dc0_pn6",
+						"lcd_sdin_pz2",
+						"lcd_wr_n_pz3",
+						"lcd_sck_pz4",
+						"lcd_cs1_n_pw0",
+						"lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2",
+						"kb_row3_pr3",
+						"kb_row8_ps0",
+						"kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_col3_pq3",
+						"kb_col4_pq4",
+						"kb_col5_pq5",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4",
+						"kb_row7_pr7",
+						"kb_row10_ps2",
+						"kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3",
+						"kb_row12_ps4",
+						"kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_rst_n_pcc3 {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+						"vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2",
+						"vi_d0_pt4", "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d11_pt3 {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pex_l1_prsnt_n_pdd4 {
+				nvidia,pins = "pex_l1_prsnt_n_pdd4",
+						"pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_wait_pi7 {
+				nvidia,pins = "gmi_wait_pi7",
+						"gmi_cs0_n_pj0",
+						"gmi_cs1_n_pj2",
+						"gmi_cs4_n_pk2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1",
+						"gmi_ad2_pg2",
+						"gmi_ad3_pg3",
+						"gmi_ad4_pg4",
+						"gmi_ad5_pg5",
+						"gmi_ad6_pg6",
+						"gmi_ad7_pg7",
+						"gmi_wr_n_pi0",
+						"gmi_oe_n_pi1",
+						"gmi_dqs_pi2",
+						"gmi_adv_n_pk0",
+						"gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs2_n_pk3 {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs3_n_pk4 {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad11_ph3",
+						"gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5",
+						"gmi_ad12_ph4",
+						"gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad8_ph0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI hot-plug-detect */
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag_rtck_pu7 {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+						"crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv2 {
+				nvidia,pins = "pv2",
+						"kb_row5_pr5";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive_dap1 {
+				nvidia,pins = "drive_dap1",
+						"drive_dap2",
+						"drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1",
+						"drive_uart3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <5>;
+				nvidia,pull-up-strength = <5>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+
+			drive_gma {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			drive_lcd2 {
+				nvidia,pins = "drive_lcd2";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>;
+				nvidia,pull-down-strength = <20>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* Azurewave AW-AH663 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lcd_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Wolfson Microelectronics WM8903 audio codec */
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_BOTH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+
+			AVDD-supply  = <&vdd_1v8_vio>;
+			CPVDD-supply = <&vdd_1v8_vio>;
+			DBVDD-supply = <&vdd_1v8_vio>;
+			DCVDD-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Atmel touchscreen */
+		touchscreen@4d {
+			compatible = "atmel,maxtouch";
+			reg = <0x4d>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+		};
+	};
+
+	i2c3: i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* AsahiKASEI AK8975 magnetometer sensor */
+		magnetometer@c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0x0c>;
+
+			vdd-supply = <&vdd_3v3_sen>;
+			vid-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =   "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+
+		light-sensor@44 {
+			compatible = "isil,isl29023";
+			reg = <0x44>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Q, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			vcc-supply = <&vdd_3v3_sen>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v3_sen>;
+			vlogic-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =   "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0x0f>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(L, 1) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_vio>;
+					vddio-supply = <&vdd_1v8_vio>;
+
+					mount-matrix =  "-1",  "0",  "0",
+							 "0",  "1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <93750>;
+	};
+
+	i2c5: i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_sys>;
+			vcc2-supply = <&vdd_5v0_sys>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_1v8_vio>;
+			vcc5-supply = <&vdd_5v0_sys>;
+			vcc6-supply = <&vddio_1v2_ddr>;
+			vcc7-supply = <&vdd_5v0_sys>;
+			vccio-supply = <&vdd_5v0_sys>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <0 GPIO_ACTIVE_HIGH>,
+					<2 GPIO_ACTIVE_HIGH>,
+					<6 GPIO_ACTIVE_HIGH>,
+					<8 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				/* VDD1 is not used by Chagall */
+
+				vddio_1v2_ddr: vdd2 {
+					regulator-name = "vddio_1v2_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					/* FIXME: eMMC won't work, if set to 1.8 V */
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDD */
+				vdd_usd: ldo2 {
+					regulator-name = "vdd_usd";
+					regulator-min-microvolt = <3200000>;
+					regulator-max-microvolt = <3200000>;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo3 {
+					regulator-name = "vddio_usd";
+					regulator-min-microvolt = <1900000>;
+					regulator-max-microvolt = <3200000>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_1v3_cam_isp";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+				};
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <300000>;
+		gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_sen: regulator-sensors {
+		compatible = "regulator-fixed";
+		regulator-name = "sen_3v3_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(K, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_5v0_bl: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_vbus_usb1: regulator-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus_micro_usb";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_vbus_usb3: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus_typea_usb";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		/* Set DEV_OFF + PWR_OFF_SET bit in DCDC control register of TPS65911 PMIC  */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* SAMSUNG K4P8G304EB FGC1 */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000006
+					0x00000001 0x00000000 0x00000004 0x00000004
+					0x04040001 0x000d090c 0x7026120d 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* ELPIDA EDB8132B2MA 8D_F */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000006
+					0x00000001 0x00000000 0x00000004 0x00000004
+					0x04040001 0x000d090c 0x7026120d 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* SAMSUNG K4P8G304EB FGC2 */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xc0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+
+		emc-timings-3 {
+			/* HYNIX H9TCNNN8JDMMPR NGM */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xc0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* SAMSUNG K4P8G304EB FGC1 */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010082>;
+				nvidia,emc-mode-2 = <0x00020004>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000024>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000017
+					0x00000033 0x00000010 0x00000007 0x00000007
+					0x00000007 0x00000002 0x0000000a 0x00000007
+					0x00000007 0x00000003 0x00000002 0x00000000
+					0x00000003 0x00000007 0x00000004 0x0000000d
+					0x0000000e 0x000005e9 0x00000000 0x0000017a
+					0x00000002 0x00000002 0x00000007 0x00000000
+					0x00000001 0x0000000c 0x00000038 0x00000038
+					0x00000006 0x00000014 0x00000009 0x00000004
+					0x00000002 0x00000680 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0x001d0084
+					0x00008000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00038000 0x00038000 0x00038000
+					0x00038000 0x00080220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000090 0x000c000c 0xa0f10404 0x00000000
+					0x00000000 0x80000ce6 0xe0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* ELPIDA EDB8132B2MA 8D_F */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010082>;
+				nvidia,emc-mode-2 = <0x00020004>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000024>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000017
+					0x00000033 0x00000010 0x00000007 0x00000007
+					0x00000007 0x00000002 0x0000000a 0x00000007
+					0x00000007 0x00000003 0x00000002 0x00000000
+					0x00000003 0x00000007 0x00000004 0x0000000d
+					0x0000000e 0x000005e9 0x00000000 0x0000017a
+					0x00000002 0x00000002 0x00000007 0x00000000
+					0x00000001 0x0000000c 0x00000038 0x00000038
+					0x00000006 0x00000014 0x00000009 0x00000004
+					0x00000002 0x00000680 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0x001d0084
+					0x00008000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x00060220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000090 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000ce6 0xe0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* SAMSUNG K4P8G304EB FGC2 */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000004 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000005 0x00000004
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x0000000a 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000004
+					0x00000002 0x000008aa 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x007f8008 0x007f8008 0x007f8008
+					0x007f8008 0x007f8008 0x007f8008 0x007f8008
+					0x007f8008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x00080220 0x0200003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xf0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-3 {
+			/* HYNIX H9TCNNN8JDMMPR NGM */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x00000009 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000004
+					0x00000002 0x000008aa 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000a0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 { /* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 { /* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>; /* ldo2 */
+		vqmmc-supply = <&vddio_usd>; /* ldo3 */
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-AH663 BCM4330B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "otg";
+		vbus-supply = <&vdd_vbus_usb1>;
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_vbus_usb3>;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_bl>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <15>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "panel-lvds";
+
+		width-mm = <217>;
+		height-mm = <136>;
+
+		data-mapping = "jeida-24";
+
+		panel-timing {
+			/* 1280x800@60Hz */
+			clock-frequency = <68000000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <48>;
+			hback-porch = <18>;
+			hsync-len = <30>;
+			vsync-len = <5>;
+			vfront-porch = <3>;
+			vback-porch = <12>;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-dock-insert {
+			label = "Chagall Dock";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_DOCK>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(S, 3) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-625000000;
+		/delete-node/ opp-667000000;
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-625000000-1200;
+		/delete-node/ opp-625000000-1250;
+		/delete-node/ opp-667000000-1200;
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	sound {
+		compatible = "pegatron,tegra-audio-wm8903-chagall",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Pegatron Chagall WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN1R", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,headset;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * Chagall from getting too hot from a user's tactile
+		 * perspective. The CPU zone is intended to protect
+		 * silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra30-peripherals-opp.dtsi
new file mode 100644
index 0000000000000..a2d557155114a
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-peripherals-opp.dtsi
@@ -0,0 +1,1648 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	core_opp_table: opp-table-core {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		core_opp_950: opp-950000 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-level = <950000>;
+		};
+
+		core_opp_1000: opp-1000000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-level = <1000000>;
+		};
+
+		core_opp_1050: opp-1050000 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-level = <1050000>;
+		};
+
+		core_opp_1100: opp-1100000 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-level = <1100000>;
+		};
+
+		core_opp_1150: opp-1150000 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-level = <1150000>;
+		};
+
+		core_opp_1200: opp-1200000 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-level = <1200000>;
+		};
+
+		core_opp_1250: opp-1250000 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-level = <1250000>;
+		};
+
+		core_opp_1300: opp-1300000 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-level = <1300000>;
+		};
+
+		core_opp_1350: opp-1350000 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-level = <1350000>;
+		};
+	};
+
+	emc_icc_dvfs_opp_table: opp-table-emc {
+		compatible = "operating-points-v2";
+
+		opp-12750000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-12750000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-12750000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-25500000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <25500000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-25500000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <25500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-25500000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <25500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-27000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <27000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-27000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <27000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-27000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <27000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-51000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <51000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-51000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <51000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-51000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <51000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-54000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <54000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-54000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <54000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-54000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <54000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-102000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-102000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-102000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-108000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <108000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-108000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <108000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-204000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+			opp-suspend;
+		};
+
+		opp-204000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+			opp-suspend;
+		};
+
+		opp-266500000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-266500000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-333500000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-333500000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-333500000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-375000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <375000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-375000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <375000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-375000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <375000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-400000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-400000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-400000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-416000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-450000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <450000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-450000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <450000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-500000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-500000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-533000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-533000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-625000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <625000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-625000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <625000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-667000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <667000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-750000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <750000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-800000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-900000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <900000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	emc_bw_dfs_opp_table: opp-table-actmon {
+		compatible = "operating-points-v2";
+
+		opp-12750000 {
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <102000>;
+		};
+
+		opp-25500000 {
+			opp-hz = /bits/ 64 <25500000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <204000>;
+		};
+
+		opp-27000000 {
+			opp-hz = /bits/ 64 <27000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <216000>;
+		};
+
+		opp-51000000 {
+			opp-hz = /bits/ 64 <51000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <408000>;
+		};
+
+		opp-54000000 {
+			opp-hz = /bits/ 64 <54000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <432000>;
+		};
+
+		opp-102000000 {
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <816000>;
+		};
+
+		opp-108000000 {
+			opp-hz = /bits/ 64 <108000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <864000>;
+		};
+
+		opp-204000000 {
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <1632000>;
+			opp-suspend;
+		};
+
+		opp-266500000 {
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <2132000>;
+		};
+
+		opp-333500000 {
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <2668000>;
+		};
+
+		opp-375000000 {
+			opp-hz = /bits/ 64 <375000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <3000000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		opp-416000000 {
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <3328000>;
+		};
+
+		opp-450000000 {
+			opp-hz = /bits/ 64 <450000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <3600000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <4000000>;
+		};
+
+		opp-533000000 {
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <4264000>;
+		};
+
+		opp-625000000 {
+			opp-hz = /bits/ 64 <625000000>;
+			opp-supported-hw = <0x000E>;
+			opp-peak-kBps = <5000000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <667000000>;
+			opp-supported-hw = <0x0006>;
+			opp-peak-kBps = <5336000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+			opp-supported-hw = <0x0004>;
+			opp-peak-kBps = <6000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x0004>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-supported-hw = <0x0004>;
+			opp-peak-kBps = <7200000>;
+		};
+	};
+
+	pcie_dvfs_opp_table: opp-table-pcie {
+		compatible = "operating-points-v2";
+
+		opp-250000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <250000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	host1x_dvfs_opp_table: opp-table-host1x {
+		compatible = "operating-points-v2";
+
+		opp-152000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-188000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <188000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-222000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <222000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-242000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <242000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-254000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <254000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-267000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	mpe_dvfs_opp_table: opp-table-mpe {
+		compatible = "operating-points-v2";
+
+		opp-234000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <234000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	vi_dvfs_opp_table: opp-table-vi {
+		compatible = "operating-points-v2";
+
+		opp-216000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <216000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-219000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <219000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-267000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-300000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-371000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <371000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-409000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <409000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-425000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <425000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-470000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <470000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+	};
+
+	epp_dvfs_opp_table: opp-table-epp {
+		compatible = "operating-points-v2";
+
+		opp-267000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	gr2d_dvfs_opp_table: opp-table-gr2d {
+		compatible = "operating-points-v2";
+
+		opp-267000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	gr3d_dvfs_opp_table: opp-table-gr3d {
+		compatible = "operating-points-v2";
+
+		opp-234000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <234000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>, <&core_opp_1000>;
+		};
+
+		opp-247000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>, <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>, <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>, <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>, <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>, <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>, <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>, <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>, <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>, <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>, <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>, <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>, <&core_opp_1350>;
+		};
+	};
+
+	disp1_dvfs_opp_table: opp-table-disp1 {
+		compatible = "operating-points-v2";
+
+		opp-120000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <120000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-155000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <155000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-268000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <268000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1050>;
+		};
+	};
+
+	disp2_dvfs_opp_table: opp-table-disp2 {
+		compatible = "operating-points-v2";
+
+		opp-120000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <120000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-155000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <155000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-268000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <268000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1050>;
+		};
+	};
+
+	hdmi_dvfs_opp_table: opp-table-hdmi {
+		compatible = "operating-points-v2";
+
+		opp-148500000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <148500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	tvo_dvfs_opp_table: opp-table-tvo {
+		compatible = "operating-points-v2";
+
+		opp-297000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <297000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+	};
+
+	dsia_dvfs_opp_table: opp-table-dsia {
+		compatible = "operating-points-v2";
+
+		opp-275000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <275000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	dsib_dvfs_opp_table: opp-table-dsib {
+		compatible = "operating-points-v2";
+
+		opp-275000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <275000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sclk_dvfs_opp_table: opp-table-sclk {
+		compatible = "operating-points-v2";
+
+		opp-51000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <51000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-136000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <136000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-164000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <164000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-191000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <191000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-205000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <205000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-216000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <216000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-227000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <227000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-267000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-334000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <334000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-378000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <378000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+	};
+
+	pll_c_dvfs_opp_table: opp-table-pllc {
+		compatible = "operating-points-v2";
+
+		opp-533000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-667000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <667000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-800000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-1066000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <1066000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-1200000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	pll_e_dvfs_opp_table: opp-table-plle {
+		compatible = "operating-points-v2";
+
+		opp-100000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	pll_m_dvfs_opp_table: opp-table-pllm {
+		compatible = "operating-points-v2";
+
+		opp-533000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-667000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <667000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-800000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-1066000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <1066000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	vde_dvfs_opp_table: opp-table-vde {
+		compatible = "operating-points-v2";
+
+		opp-228000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <228000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-275000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <275000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-352000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <352000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-400000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-437000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <437000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	fuse_burn_dvfs_opp_table: opp-table-fuseburn {
+		compatible = "operating-points-v2";
+
+		opp-26000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <26000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1150>;
+		};
+	};
+
+	nor_dvfs_opp_table: opp-table-nor {
+		compatible = "operating-points-v2";
+
+		opp-108000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <108000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-115000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <115000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-130000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <130000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-133000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1150>;
+		};
+	};
+
+	pwm_dvfs_opp_table: opp-table-pwm {
+		compatible = "operating-points-v2";
+
+		opp-408000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sbc1_dvfs_opp_table: opp-table-sbc1 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc2_dvfs_opp_table: opp-table-sbc2 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc3_dvfs_opp_table: opp-table-sbc3 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc4_dvfs_opp_table: opp-table-sbc4 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc5_dvfs_opp_table: opp-table-sbc5 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc6_dvfs_opp_table: opp-table-sbc6 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sdmmc1_dvfs_opp_table: opp-table-sdmmc1 {
+		compatible = "operating-points-v2";
+
+		opp-104000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <104000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-208000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <208000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sdmmc3_dvfs_opp_table: opp-table-sdmmc3 {
+		compatible = "operating-points-v2";
+
+		opp-104000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <104000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-208000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <208000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	usbd_dvfs_opp_table: opp-table-usbd {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	usb2_dvfs_opp_table: opp-table-usb2 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	usb3_dvfs_opp_table: opp-table-usb3 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30.dtsi b/arch/arm/boot/dts/nvidia/tegra30.dtsi
new file mode 100644
index 0000000000000..9cba67b541115
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30.dtsi
@@ -0,0 +1,1348 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra30-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra30-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/tegra-pmc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30-peripherals-opp.dtsi"
+
+/ {
+	compatible = "nvidia,tegra30";
+	interrupt-parent = <&lic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x0>;
+	};
+
+	pcie@3000 {
+		compatible = "nvidia,tegra30-pcie";
+		device_type = "pci";
+		reg = <0x00003000 0x00000800>, /* PADS registers */
+		      <0x00003800 0x00000200>, /* AFI registers */
+		      <0x10000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x02000000 0 0x00000000 0x00000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x00001000 0x00001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x02000000 0 0x00004000 0x00004000 0 0x00001000>, /* port 2 configuration space */
+			 <0x01000000 0 0          0x02000000 0 0x00010000>, /* downstream I/O */
+			 <0x02000000 0 0x20000000 0x20000000 0 0x08000000>, /* non-prefetchable memory */
+			 <0x42000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA30_CLK_PCIE>,
+			 <&tegra_car TEGRA30_CLK_AFI>,
+			 <&tegra_car TEGRA30_CLK_PLL_E>,
+			 <&tegra_car TEGRA30_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&pcie_dvfs_opp_table>;
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
+			reg = <0x001800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	sram@40000000 {
+		compatible = "mmio-sram";
+		reg = <0x40000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000>;
+
+		vde_pool: sram@400 {
+			reg = <0x400 0x3fc00>;
+			pool;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra30-host1x";
+		reg = <0x50000000 0x00024000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA30_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
+		iommus = <&mc TEGRA_SWGROUP_HC>;
+		power-domains = <&pd_heg>;
+		operating-points-v2 = <&host1x_dvfs_opp_table>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x04000000>;
+
+		mpe@54040000 {
+			compatible = "nvidia,tegra30-mpe";
+			reg = <0x54040000 0x00040000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_MPE>;
+			resets = <&tegra_car 60>;
+			reset-names = "mpe";
+			power-domains = <&pd_mpe>;
+			operating-points-v2 = <&mpe_dvfs_opp_table>;
+
+			iommus = <&mc TEGRA_SWGROUP_MPE>;
+
+			status = "disabled";
+		};
+
+		vi@54080000 {
+			compatible = "nvidia,tegra30-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_VI>;
+			resets = <&tegra_car 20>;
+			reset-names = "vi";
+			power-domains = <&pd_venc>;
+			operating-points-v2 = <&vi_dvfs_opp_table>;
+
+			iommus = <&mc TEGRA_SWGROUP_VI>;
+
+			status = "disabled";
+		};
+
+		epp@540c0000 {
+			compatible = "nvidia,tegra30-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_EPP>;
+			resets = <&tegra_car 19>;
+			reset-names = "epp";
+			power-domains = <&pd_heg>;
+			operating-points-v2 = <&epp_dvfs_opp_table>;
+
+			iommus = <&mc TEGRA_SWGROUP_EPP>;
+
+			status = "disabled";
+		};
+
+		isp@54100000 {
+			compatible = "nvidia,tegra30-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_ISP>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
+			power-domains = <&pd_venc>;
+
+			iommus = <&mc TEGRA_SWGROUP_ISP>;
+
+			status = "disabled";
+		};
+
+		gr2d@54140000 {
+			compatible = "nvidia,tegra30-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
+			resets = <&tegra_car 21>, <&mc TEGRA30_MC_RESET_2D>;
+			reset-names = "2d", "mc";
+			power-domains = <&pd_heg>;
+			operating-points-v2 = <&gr2d_dvfs_opp_table>;
+
+			iommus = <&mc TEGRA_SWGROUP_G2>;
+		};
+
+		gr3d@54180000 {
+			compatible = "nvidia,tegra30-gr3d";
+			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA30_CLK_GR3D>,
+				 <&tegra_car TEGRA30_CLK_GR3D2>;
+			clock-names = "3d", "3d2";
+			resets = <&tegra_car 24>,
+				 <&tegra_car 98>,
+				 <&mc TEGRA30_MC_RESET_3D>,
+				 <&mc TEGRA30_MC_RESET_3D2>;
+			reset-names = "3d", "3d2", "mc", "mc2";
+			power-domains = <&pd_3d0>, <&pd_3d1>;
+			power-domain-names = "3d0", "3d1";
+			operating-points-v2 = <&gr3d_dvfs_opp_table>;
+
+			iommus = <&mc TEGRA_SWGROUP_NV>,
+				 <&mc TEGRA_SWGROUP_NV2>;
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra30-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
+				 <&tegra_car TEGRA30_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp1_dvfs_opp_table>;
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+
+			interconnects = <&mc TEGRA30_MC_DISPLAY0A &emc>,
+					<&mc TEGRA30_MC_DISPLAY0B &emc>,
+					<&mc TEGRA30_MC_DISPLAY1B &emc>,
+					<&mc TEGRA30_MC_DISPLAY0C &emc>,
+					<&mc TEGRA30_MC_DISPLAYHC &emc>;
+			interconnect-names = "wina",
+					     "winb",
+					     "winb-vfilter",
+					     "winc",
+					     "cursor";
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra30-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_DISP2>,
+				 <&tegra_car TEGRA30_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp2_dvfs_opp_table>;
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+
+			interconnects = <&mc TEGRA30_MC_DISPLAY0AB &emc>,
+					<&mc TEGRA30_MC_DISPLAY0BB &emc>,
+					<&mc TEGRA30_MC_DISPLAY1BB &emc>,
+					<&mc TEGRA30_MC_DISPLAY0CB &emc>,
+					<&mc TEGRA30_MC_DISPLAYHCB &emc>;
+			interconnect-names = "wina",
+					     "winb",
+					     "winb-vfilter",
+					     "winc",
+					     "cursor";
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra30-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_HDMI>,
+				 <&tegra_car TEGRA30_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&hdmi_dvfs_opp_table>;
+			status = "disabled";
+		};
+
+		tvo@542c0000 {
+			compatible = "nvidia,tegra30-tvo";
+			reg = <0x542c0000 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_TVO>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&tvo_dvfs_opp_table>;
+			status = "disabled";
+		};
+
+		dsi@54300000 {
+			compatible = "nvidia,tegra30-dsi";
+			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA30_CLK_DSIA>,
+				 <&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&dsia_dvfs_opp_table>;
+			status = "disabled";
+		};
+
+		dsi@54400000 {
+			compatible = "nvidia,tegra30-dsi";
+			reg = <0x54400000 0x00040000>;
+			clocks = <&tegra_car TEGRA30_CLK_DSIB>,
+				 <&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
+			resets = <&tegra_car 84>;
+			reset-names = "dsi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&dsib_dvfs_opp_table>;
+			status = "disabled";
+		};
+	};
+
+	timer@50040600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x50040600 0x20>;
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&tegra_car TEGRA30_CLK_TWD>;
+	};
+
+	intc: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a9-gic";
+		reg = <0x50041000 0x1000>,
+		      <0x50040100 0x0100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};
+
+	cache-controller@50043000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x50043000 0x1000>;
+		arm,data-latency = <6 6 2>;
+		arm,tag-latency = <5 5 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra30-ictlr";
+		reg = <0x60004000 0x100>,
+		      <0x60004100 0x50>,
+		      <0x60004200 0x50>,
+		      <0x60004300 0x50>,
+		      <0x60004400 0x50>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		reg = <0x60005000 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra30-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+
+		pll-c {
+			compatible = "nvidia,tegra30-pllc";
+			clocks = <&tegra_car TEGRA30_CLK_PLL_C>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&pll_c_dvfs_opp_table>;
+		};
+
+		pll-e {
+			compatible = "nvidia,tegra30-plle";
+			clocks = <&tegra_car TEGRA30_CLK_PLL_E>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&pll_e_dvfs_opp_table>;
+		};
+
+		pll-m {
+			compatible = "nvidia,tegra30-pllm";
+			clocks = <&tegra_car TEGRA30_CLK_PLL_M>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&pll_m_dvfs_opp_table>;
+		};
+
+		sclk {
+			compatible = "nvidia,tegra30-sclk";
+			clocks = <&tegra_car TEGRA30_CLK_SCLK>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&sclk_dvfs_opp_table>;
+		};
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra30-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
+
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
+		reg = <0x6000a000 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	ahb: ahb@6000c000 {
+		compatible = "nvidia,tegra30-ahb";
+		reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */
+	};
+
+	actmon: actmon@6000c800 {
+		compatible = "nvidia,tegra30-actmon";
+		reg = <0x6000c800 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_ACTMON>,
+			 <&tegra_car TEGRA30_CLK_EMC>;
+		clock-names = "actmon", "emc";
+		resets = <&tegra_car TEGRA30_CLK_ACTMON>;
+		reset-names = "actmon";
+		operating-points-v2 = <&emc_bw_dfs_opp_table>;
+		interconnects = <&mc TEGRA30_MC_MPCORER &emc>;
+		interconnect-names = "cpu-read";
+		#cooling-cells = <2>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		gpio-ranges = <&pinmux 0 0 248>;
+	};
+
+	vde@6001a000 {
+		compatible = "nvidia,tegra30-vde", "nvidia,tegra20-vde";
+		reg = <0x6001a000 0x1000>, /* Syntax Engine */
+		      <0x6001b000 0x1000>, /* Video Bitstream Engine */
+		      <0x6001c000  0x100>, /* Macroblock Engine */
+		      <0x6001c200  0x100>, /* Post-processing Engine */
+		      <0x6001c400  0x100>, /* Motion Compensation Engine */
+		      <0x6001c600  0x100>, /* Transform Engine */
+		      <0x6001c800  0x100>, /* Pixel prediction block */
+		      <0x6001ca00  0x100>, /* Video DMA */
+		      <0x6001d800  0x400>; /* Video frame controls */
+		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+			    "tfe", "ppb", "vdma", "frameid";
+		iram = <&vde_pool>; /* IRAM region */
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
+		interrupt-names = "sync-token", "bsev", "sxe";
+		clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		reset-names = "vde", "mc";
+		resets = <&tegra_car 61>, <&mc TEGRA30_MC_RESET_VDE>;
+		iommus = <&mc TEGRA_SWGROUP_VDE>;
+		power-domains = <&pd_vde>;
+		operating-points-v2 = <&vde_dvfs_opp_table>;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64>, /* Chip revision */
+		      <0x70000008 0x04>; /* Strapping options */
+	};
+
+	pinmux: pinmux@70000868 {
+		compatible = "nvidia,tegra30-pinmux";
+		reg = <0x70000868 0x0d4>, /* Pad control registers */
+		      <0x70003000 0x3e4>; /* Mux registers */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uarte: serial@70006400 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006400 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTE>;
+		resets = <&tegra_car 66>;
+		reset-names = "serial";
+		dmas = <&apbdma 20>, <&apbdma 20>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	gmi@70009000 {
+		compatible = "nvidia,tegra30-gmi";
+		reg = <0x70009000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x48000000 0x7ffffff>;
+		clocks = <&tegra_car TEGRA30_CLK_NOR>;
+		clock-names = "gmi";
+		resets = <&tegra_car 42>;
+		reset-names = "gmi";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&nor_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA30_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&pwm_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C1>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C2>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C3>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C4>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		clock-names = "div-clk", "fast-clk";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C5>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra30-slink";
+		reg = <0x7000d400 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC1>;
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc1_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra30-slink";
+		reg = <0x7000d600 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC2>;
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc2_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra30-slink";
+		reg = <0x7000d800 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC3>;
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc3_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra30-slink";
+		reg = <0x7000da00 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC4>;
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc4_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra30-slink";
+		reg = <0x7000dc00 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC5>;
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc5_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra30-slink";
+		reg = <0x7000de00 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC6>;
+		resets = <&tegra_car 106>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc6_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_RTC>;
+	};
+
+	kbc@7000e200 {
+		compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_KBC>;
+		resets = <&tegra_car 36>;
+		reset-names = "kbc";
+		status = "disabled";
+	};
+
+	tegra_pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra30-pmc";
+		reg = <0x7000e400 0x400>;
+		clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
+
+		pd_core: core-domain {
+			#power-domain-cells = <0>;
+			operating-points-v2 = <&core_opp_table>;
+		};
+
+		powergates {
+			pd_heg: heg {
+				clocks = <&tegra_car TEGRA30_CLK_GR2D>,
+					 <&tegra_car TEGRA30_CLK_EPP>,
+					 <&tegra_car TEGRA30_CLK_HOST1X>;
+				resets = <&mc TEGRA30_MC_RESET_2D>,
+					 <&mc TEGRA30_MC_RESET_EPP>,
+					 <&mc TEGRA30_MC_RESET_HC>,
+					 <&tegra_car TEGRA30_CLK_GR2D>,
+					 <&tegra_car TEGRA30_CLK_EPP>,
+					 <&tegra_car TEGRA30_CLK_HOST1X>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_mpe: mpe {
+				clocks = <&tegra_car TEGRA30_CLK_MPE>;
+				resets = <&mc TEGRA30_MC_RESET_MPE>,
+					 <&tegra_car TEGRA30_CLK_MPE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_3d0: td {
+				clocks = <&tegra_car TEGRA30_CLK_GR3D>;
+				resets = <&mc TEGRA30_MC_RESET_3D>,
+					 <&tegra_car TEGRA30_CLK_GR3D>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_3d1: td2 {
+				clocks = <&tegra_car TEGRA30_CLK_GR3D2>;
+				resets = <&mc TEGRA30_MC_RESET_3D2>,
+					 <&tegra_car TEGRA30_CLK_GR3D2>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_vde: vdec {
+				clocks = <&tegra_car TEGRA30_CLK_VDE>;
+				resets = <&mc TEGRA30_MC_RESET_VDE>,
+					 <&tegra_car TEGRA30_CLK_VDE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_venc: venc {
+				clocks = <&tegra_car TEGRA30_CLK_ISP>,
+					 <&tegra_car TEGRA30_CLK_VI>,
+					 <&tegra_car TEGRA30_CLK_CSI>;
+				resets = <&mc TEGRA30_MC_RESET_ISP>,
+					 <&mc TEGRA30_MC_RESET_VI>,
+					 <&tegra_car TEGRA30_CLK_ISP>,
+					 <&tegra_car 20 /* VI */>,
+					 <&tegra_car TEGRA30_CLK_CSI>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	mc: memory-controller@7000f000 {
+		compatible = "nvidia,tegra30-mc";
+		reg = <0x7000f000 0x400>;
+		clocks = <&tegra_car TEGRA30_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+		#reset-cells = <1>;
+		#interconnect-cells = <1>;
+	};
+
+	emc: memory-controller@7000f400 {
+		compatible = "nvidia,tegra30-emc";
+		reg = <0x7000f400 0x400>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_EMC>;
+		power-domains = <&pd_core>;
+
+		nvidia,memory-controller = <&mc>;
+		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
+
+		#interconnect-cells = <0>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra30-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA30_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&fuse_burn_dvfs_opp_table>;
+	};
+
+	tsensor: tsensor@70014000 {
+		compatible = "nvidia,tegra30-tsensor";
+		reg = <0x70014000 0x500>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_TSENSOR>;
+		resets = <&tegra_car TEGRA30_CLK_TSENSOR>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_TSENSOR>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_CLK_M>;
+		assigned-clock-rates = <500000>;
+
+		#thermal-sensor-cells = <1>;
+	};
+
+	hda@70030000 {
+		compatible = "nvidia,tegra30-hda";
+		reg = <0x70030000 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_HDA>,
+			 <&tegra_car TEGRA30_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
+	ahub@70080000 {
+		compatible = "nvidia,tegra30-ahub";
+		reg = <0x70080000 0x200>,
+		      <0x70080200 0x100>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA30_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>;  /* spdif */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		tegra_i2s0: i2s@70080300 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080300 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S0>;
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@70080400 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080400 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S1>;
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@70080500 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080500 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S2>;
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@70080600 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080600 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S3>;
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@70080700 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080700 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S4>;
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	mmc@78000000 {
+		compatible = "nvidia,tegra30-sdhci";
+		reg = <0x78000000 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc1_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	mmc@78000200 {
+		compatible = "nvidia,tegra30-sdhci";
+		reg = <0x78000200 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC2>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@78000400 {
+		compatible = "nvidia,tegra30-sdhci";
+		reg = <0x78000400 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc3_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	mmc@78000600 {
+		compatible = "nvidia,tegra30-sdhci";
+		reg = <0x78000600 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC4>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,needs-double-reset;
+		nvidia,phy = <&phy1>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usbd_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000>,
+		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USBD>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <1>;
+		nvidia,xcvr-lsrslew = <1>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra30-ehci";
+		reg = <0x7d004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb2_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d004000 0x4000>,
+		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB2>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,pmc = <&tegra_pmc 2>;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra30-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb3_dvfs_opp_table>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000>,
+		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB3>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,pmc = <&tegra_pmc 1>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	thermal-zones {
+		tsensor0-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsensor 0>;
+
+			trips {
+				level1_trip: dvfs-alert {
+					/* throttle at 80C until temperature drops to 79.8C */
+					temperature = <80000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				level2_trip: cpu-div2-throttle {
+					/* hardware CPU x2 freq throttle at 85C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "hot";
+				};
+
+				level3_trip: soc-critical {
+					/* hardware shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&level1_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		tsensor1-thermal {
+			status = "disabled";
+
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <0>; /* milliseconds */
+
+			thermal-sensors = <&tsensor 1>;
+
+			trips {
+				dvfs-alert {
+					temperature = <80000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/Makefile b/arch/arm/boot/dts/nxp/Makefile
new file mode 100644
index 0000000000000..db44e7a0a1983
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-y += imx
+subdir-y += lpc
+subdir-y += ls
+subdir-y += mxs
+subdir-y += vf
diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
new file mode 100644
index 0000000000000..3629e343d3225
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -0,0 +1,388 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_IMX1) += \
+	imx1-ads.dtb \
+	imx1-apf9328.dtb
+dtb-$(CONFIG_SOC_IMX25) += \
+	imx25-eukrea-mbimxsd25-baseboard.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
+	imx25-karo-tx25.dtb \
+	imx25-pdk.dtb
+dtb-$(CONFIG_SOC_IMX27) += \
+	imx27-apf27.dtb \
+	imx27-apf27dev.dtb \
+	imx27-eukrea-mbimxsd27-baseboard.dtb \
+	imx27-pdk.dtb \
+	imx27-phytec-phycore-rdk.dtb \
+	imx27-phytec-phycard-s-rdk.dtb
+dtb-$(CONFIG_SOC_IMX31) += \
+	imx31-bug.dtb \
+	imx31-lite.dtb
+dtb-$(CONFIG_SOC_IMX35) += \
+	imx35-eukrea-mbimxsd35-baseboard.dtb \
+	imx35-pdk.dtb
+dtb-$(CONFIG_SOC_IMX50) += \
+	imx50-evk.dtb \
+	imx50-kobo-aura.dtb
+dtb-$(CONFIG_SOC_IMX51) += \
+	imx51-apf51.dtb \
+	imx51-apf51dev.dtb \
+	imx51-babbage.dtb \
+	imx51-digi-connectcore-jsk.dtb \
+	imx51-eukrea-mbimxsd51-baseboard.dtb \
+	imx51-ts4800.dtb \
+	imx51-zii-rdu1.dtb \
+	imx51-zii-scu2-mezz.dtb \
+	imx51-zii-scu3-esb.dtb
+dtb-$(CONFIG_SOC_IMX53) += \
+	imx53-ard.dtb \
+	imx53-cx9020.dtb \
+	imx53-kp-ddc.dtb \
+	imx53-kp-hsc.dtb \
+	imx53-m53evk.dtb \
+	imx53-m53menlo.dtb \
+	imx53-mba53.dtb \
+	imx53-ppd.dtb \
+	imx53-qsb.dtb \
+	imx53-qsrb.dtb \
+	imx53-sk-imx53.dtb \
+	imx53-smd.dtb \
+	imx53-tx53-x03x.dtb \
+	imx53-tx53-x13x.dtb \
+	imx53-usbarmory.dtb \
+	imx53-voipac-bsb.dtb
+dtb-$(CONFIG_SOC_IMX6Q) += \
+	imx6dl-alti6p.dtb \
+	imx6dl-apf6dev.dtb \
+	imx6dl-aristainetos_4.dtb \
+	imx6dl-aristainetos_7.dtb \
+	imx6dl-aristainetos2_4.dtb \
+	imx6dl-aristainetos2_7.dtb \
+	imx6dl-colibri-aster.dtb \
+	imx6dl-colibri-eval-v3.dtb \
+	imx6dl-colibri-iris.dtb \
+	imx6dl-colibri-iris-v2.dtb \
+	imx6dl-cubox-i.dtb \
+	imx6dl-cubox-i-emmc-som-v15.dtb \
+	imx6dl-cubox-i-som-v15.dtb \
+	imx6dl-dfi-fs700-m60.dtb \
+	imx6dl-dhcom-picoitx.dtb \
+	imx6dl-eckelmann-ci4x10.dtb \
+	imx6dl-emcon-avari.dtb \
+	imx6dl-gw51xx.dtb \
+	imx6dl-gw52xx.dtb \
+	imx6dl-gw53xx.dtb \
+	imx6dl-gw54xx.dtb \
+	imx6dl-gw551x.dtb \
+	imx6dl-gw552x.dtb \
+	imx6dl-gw553x.dtb \
+	imx6dl-gw560x.dtb \
+	imx6dl-gw5903.dtb \
+	imx6dl-gw5904.dtb \
+	imx6dl-gw5907.dtb \
+	imx6dl-gw5910.dtb \
+	imx6dl-gw5912.dtb \
+	imx6dl-gw5913.dtb \
+	imx6dl-hummingboard.dtb \
+	imx6dl-hummingboard-emmc-som-v15.dtb \
+	imx6dl-hummingboard-som-v15.dtb \
+	imx6dl-hummingboard2.dtb \
+	imx6dl-hummingboard2-emmc-som-v15.dtb \
+	imx6dl-hummingboard2-som-v15.dtb \
+	imx6dl-icore.dtb \
+	imx6dl-icore-mipi.dtb \
+	imx6dl-icore-rqs.dtb \
+	imx6dl-lanmcu.dtb \
+	imx6dl-mamoj.dtb \
+	imx6dl-mba6a.dtb \
+	imx6dl-mba6b.dtb \
+	imx6dl-nit6xlite.dtb \
+	imx6dl-nitrogen6x.dtb \
+	imx6dl-phytec-mira-rdk-nand.dtb \
+	imx6dl-phytec-pbab01.dtb \
+	imx6dl-pico-dwarf.dtb \
+	imx6dl-pico-hobbit.dtb \
+	imx6dl-pico-nymph.dtb \
+	imx6dl-pico-pi.dtb \
+	imx6dl-plybas.dtb \
+	imx6dl-plym2m.dtb \
+	imx6dl-prtmvt.dtb \
+	imx6dl-prtrvt.dtb \
+	imx6dl-prtvt7.dtb \
+	imx6dl-rex-basic.dtb \
+	imx6dl-riotboard.dtb \
+	imx6dl-sabreauto.dtb \
+	imx6dl-sabrelite.dtb \
+	imx6dl-sabresd.dtb \
+	imx6dl-savageboard.dtb \
+	imx6dl-skov-revc-lt2.dtb \
+	imx6dl-skov-revc-lt6.dtb \
+	imx6dl-solidsense.dtb \
+	imx6dl-ts4900.dtb \
+	imx6dl-ts7970.dtb \
+	imx6dl-tx6dl-comtft.dtb \
+	imx6dl-tx6s-8034.dtb \
+	imx6dl-tx6s-8034-mb7.dtb \
+	imx6dl-tx6s-8035.dtb \
+	imx6dl-tx6s-8035-mb7.dtb \
+	imx6dl-tx6u-801x.dtb \
+	imx6dl-tx6u-80xx-mb7.dtb \
+	imx6dl-tx6u-8033.dtb \
+	imx6dl-tx6u-8033-mb7.dtb \
+	imx6dl-tx6u-811x.dtb \
+	imx6dl-tx6u-81xx-mb7.dtb \
+	imx6dl-udoo.dtb \
+	imx6dl-victgo.dtb \
+	imx6dl-vicut1.dtb \
+	imx6dl-wandboard.dtb \
+	imx6dl-wandboard-revb1.dtb \
+	imx6dl-wandboard-revd1.dtb \
+	imx6dl-yapp4-draco.dtb \
+	imx6dl-yapp4-hydra.dtb \
+	imx6dl-yapp4-lynx.dtb \
+	imx6dl-yapp4-orion.dtb \
+	imx6dl-yapp4-phoenix.dtb \
+	imx6dl-yapp4-ursa.dtb \
+	imx6q-apalis-eval.dtb \
+	imx6q-apalis-ixora.dtb \
+	imx6q-apalis-ixora-v1.1.dtb \
+	imx6q-apalis-ixora-v1.2.dtb \
+	imx6q-apf6dev.dtb \
+	imx6q-arm2.dtb \
+	imx6q-b450v3.dtb \
+	imx6q-b650v3.dtb \
+	imx6q-b850v3.dtb \
+	imx6q-bosch-acc.dtb \
+	imx6q-cm-fx6.dtb \
+	imx6q-cubox-i.dtb \
+	imx6q-cubox-i-emmc-som-v15.dtb \
+	imx6q-cubox-i-som-v15.dtb \
+	imx6q-dfi-fs700-m60.dtb \
+	imx6q-dhcom-pdk2.dtb \
+	imx6q-display5-tianma-tm070-1280x768.dtb \
+	imx6q-dmo-edmqmx6.dtb \
+	imx6q-dms-ba16.dtb \
+	imx6q-ds.dtb \
+	imx6q-emcon-avari.dtb \
+	imx6q-evi.dtb \
+	imx6dl-b105pv2.dtb \
+	imx6dl-b105v2.dtb \
+	imx6dl-b125v2.dtb \
+	imx6dl-b125pv2.dtb \
+	imx6dl-b155v2.dtb \
+	imx6q-gk802.dtb \
+	imx6q-gw51xx.dtb \
+	imx6q-gw52xx.dtb \
+	imx6q-gw53xx.dtb \
+	imx6q-gw5400-a.dtb \
+	imx6q-gw54xx.dtb \
+	imx6q-gw551x.dtb \
+	imx6q-gw552x.dtb \
+	imx6q-gw553x.dtb \
+	imx6q-gw560x.dtb \
+	imx6q-gw5903.dtb \
+	imx6q-gw5904.dtb \
+	imx6q-gw5907.dtb \
+	imx6q-gw5910.dtb \
+	imx6q-gw5912.dtb \
+	imx6q-gw5913.dtb \
+	imx6q-h100.dtb \
+	imx6q-hummingboard.dtb \
+	imx6q-hummingboard-emmc-som-v15.dtb \
+	imx6q-hummingboard-som-v15.dtb \
+	imx6q-hummingboard2.dtb \
+	imx6q-hummingboard2-emmc-som-v15.dtb \
+	imx6q-hummingboard2-som-v15.dtb \
+	imx6q-icore.dtb \
+	imx6q-icore-mipi.dtb \
+	imx6q-icore-ofcap10.dtb \
+	imx6q-icore-ofcap12.dtb \
+	imx6q-icore-rqs.dtb \
+	imx6q-kp-tpc.dtb \
+	imx6q-logicpd.dtb \
+	imx6q-marsboard.dtb \
+	imx6q-mba6a.dtb \
+	imx6q-mba6b.dtb \
+	imx6q-mccmon6.dtb \
+	imx6q-nitrogen6x.dtb \
+	imx6q-nitrogen6_max.dtb \
+	imx6q-nitrogen6_som2.dtb \
+	imx6q-novena.dtb \
+	imx6q-phytec-mira-rdk-emmc.dtb \
+	imx6q-phytec-mira-rdk-nand.dtb \
+	imx6q-phytec-pbab01.dtb \
+	imx6q-pico-dwarf.dtb \
+	imx6q-pico-hobbit.dtb \
+	imx6q-pico-nymph.dtb \
+	imx6q-pico-pi.dtb \
+	imx6q-pistachio.dtb \
+	imx6q-prti6q.dtb \
+	imx6q-prtwd2.dtb \
+	imx6q-rex-pro.dtb \
+	imx6q-sabreauto.dtb \
+	imx6q-sabrelite.dtb \
+	imx6q-sabresd.dtb \
+	imx6q-savageboard.dtb \
+	imx6q-sbc6x.dtb \
+	imx6q-skov-revc-lt2.dtb \
+	imx6q-skov-revc-lt6.dtb \
+	imx6q-skov-reve-mi1010ait-1cp1.dtb \
+	imx6q-solidsense.dtb \
+	imx6q-tbs2910.dtb \
+	imx6q-ts4900.dtb \
+	imx6q-ts7970.dtb \
+	imx6q-tx6q-1010.dtb \
+	imx6q-tx6q-1010-comtft.dtb \
+	imx6q-tx6q-1020.dtb \
+	imx6q-tx6q-1020-comtft.dtb \
+	imx6q-tx6q-1036.dtb \
+	imx6q-tx6q-1036-mb7.dtb \
+	imx6q-tx6q-10x0-mb7.dtb \
+	imx6q-tx6q-1110.dtb \
+	imx6q-tx6q-11x0-mb7.dtb \
+	imx6q-udoo.dtb \
+	imx6q-utilite-pro.dtb \
+	imx6q-var-dt6customboard.dtb \
+	imx6q-vicut1.dtb \
+	imx6q-wandboard.dtb \
+	imx6q-wandboard-revb1.dtb \
+	imx6q-wandboard-revd1.dtb \
+	imx6q-yapp4-crux.dtb \
+	imx6q-yapp4-pegasus.dtb \
+	imx6q-zii-rdu2.dtb \
+	imx6qp-mba6b.dtb \
+	imx6qp-nitrogen6_max.dtb \
+	imx6qp-nitrogen6_som2.dtb \
+	imx6qp-phytec-mira-rdk-nand.dtb \
+	imx6qp-prtwd3.dtb \
+	imx6qp-sabreauto.dtb \
+	imx6qp-sabresd.dtb \
+	imx6qp-tx6qp-8037.dtb \
+	imx6qp-tx6qp-8037-mb7.dtb \
+	imx6qp-tx6qp-8137.dtb \
+	imx6qp-tx6qp-8137-mb7.dtb \
+	imx6qp-vicutp.dtb \
+	imx6qp-wandboard-revd1.dtb \
+	imx6qp-yapp4-crux-plus.dtb \
+	imx6qp-yapp4-pegasus-plus.dtb \
+	imx6qp-zii-rdu2.dtb \
+	imx6s-dhcom-drc02.dtb
+dtb-$(CONFIG_SOC_IMX6SL) += \
+	imx6sl-evk.dtb \
+	imx6sl-kobo-aura2.dtb \
+	imx6sl-tolino-shine2hd.dtb \
+	imx6sl-tolino-shine3.dtb \
+	imx6sl-tolino-vision.dtb \
+	imx6sl-tolino-vision5.dtb \
+	imx6sl-warp.dtb
+dtb-$(CONFIG_SOC_IMX6SLL) += \
+	imx6sll-evk.dtb \
+	imx6sll-kobo-clarahd.dtb \
+	imx6sll-kobo-librah2o.dtb
+dtb-$(CONFIG_SOC_IMX6SX) += \
+	imx6sx-nitrogen6sx.dtb \
+	imx6sx-sabreauto.dtb \
+	imx6sx-sdb-reva.dtb \
+	imx6sx-sdb-sai.dtb \
+	imx6sx-sdb.dtb \
+	imx6sx-sdb-mqs.dtb \
+	imx6sx-softing-vining-2000.dtb \
+	imx6sx-udoo-neo-basic.dtb \
+	imx6sx-udoo-neo-extended.dtb \
+	imx6sx-udoo-neo-full.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += \
+	imx6ul-14x14-evk.dtb \
+	imx6ul-ccimx6ulsbcexpress.dtb \
+	imx6ul-ccimx6ulsbcpro.dtb \
+	imx6ul-geam.dtb \
+	imx6ul-isiot-emmc.dtb \
+	imx6ul-isiot-nand.dtb \
+	imx6ul-kontron-bl.dtb \
+	imx6ul-kontron-bl-43.dtb \
+	imx6ul-liteboard.dtb \
+	imx6ul-tqma6ul1-mba6ulx.dtb \
+	imx6ul-tqma6ul2-mba6ulx.dtb \
+	imx6ul-tqma6ul2l-mba6ulx.dtb \
+	imx6ul-opos6uldev.dtb \
+	imx6ul-pico-dwarf.dtb \
+	imx6ul-pico-hobbit.dtb \
+	imx6ul-pico-pi.dtb \
+	imx6ul-phytec-segin-ff-rdk-emmc.dtb \
+	imx6ul-phytec-segin-ff-rdk-nand.dtb \
+	imx6ul-prti6g.dtb \
+	imx6ul-tx6ul-0010.dtb \
+	imx6ul-tx6ul-0011.dtb \
+	imx6ul-tx6ul-mainboard.dtb \
+	imx6ull-14x14-evk.dtb \
+	imx6ull-colibri-aster.dtb \
+	imx6ull-colibri-emmc-aster.dtb \
+	imx6ull-colibri-emmc-eval-v3.dtb \
+	imx6ull-colibri-emmc-iris.dtb \
+	imx6ull-colibri-emmc-iris-v2.dtb \
+	imx6ull-colibri-eval-v3.dtb \
+	imx6ull-colibri-iris.dtb \
+	imx6ull-colibri-iris-v2.dtb \
+	imx6ull-colibri-wifi-aster.dtb \
+	imx6ull-colibri-wifi-eval-v3.dtb \
+	imx6ull-colibri-wifi-iris.dtb \
+	imx6ull-colibri-wifi-iris-v2.dtb \
+	imx6ull-dhcom-drc02.dtb \
+	imx6ull-dhcom-pdk2.dtb \
+	imx6ull-dhcom-picoitx.dtb \
+	imx6ull-dhcor-maveo-box.dtb \
+	imx6ull-jozacp.dtb \
+	imx6ull-kontron-bl.dtb \
+	imx6ull-myir-mys-6ulx-eval.dtb \
+	imx6ull-opos6uldev.dtb \
+	imx6ull-phytec-segin-ff-rdk-nand.dtb \
+	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
+	imx6ull-phytec-segin-lc-rdk-nand.dtb \
+	imx6ull-phytec-tauri-emmc.dtb \
+	imx6ull-phytec-tauri-nand.dtb \
+	imx6ull-tarragon-master.dtb \
+	imx6ull-tarragon-micro.dtb \
+	imx6ull-tarragon-slave.dtb \
+	imx6ull-tarragon-slavext.dtb \
+	imx6ull-tqma6ull2-mba6ulx.dtb \
+	imx6ull-tqma6ull2l-mba6ulx.dtb \
+	imx6ulz-14x14-evk.dtb \
+	imx6ulz-bsh-smm-m2.dtb
+dtb-$(CONFIG_SOC_IMX7D) += \
+	imx7d-cl-som-imx7.dtb \
+	imx7d-colibri-aster.dtb \
+	imx7d-colibri-emmc-aster.dtb \
+	imx7d-colibri-emmc-iris.dtb \
+	imx7d-colibri-emmc-iris-v2.dtb \
+	imx7d-colibri-emmc-eval-v3.dtb \
+	imx7d-colibri-eval-v3.dtb \
+	imx7d-colibri-iris.dtb \
+	imx7d-colibri-iris-v2.dtb \
+	imx7d-flex-concentrator.dtb \
+	imx7d-flex-concentrator-mfg.dtb \
+	imx7d-mba7.dtb \
+	imx7d-meerkat96.dtb \
+	imx7d-nitrogen7.dtb \
+	imx7d-pico-dwarf.dtb \
+	imx7d-pico-hobbit.dtb \
+	imx7d-pico-nymph.dtb \
+	imx7d-pico-pi.dtb \
+	imx7d-remarkable2.dtb \
+	imx7d-sbc-imx7.dtb \
+	imx7d-sdb.dtb \
+	imx7d-sdb-reva.dtb \
+	imx7d-sdb-sht11.dtb \
+	imx7d-smegw01.dtb \
+	imx7d-zii-rmu2.dtb \
+	imx7d-zii-rpu2.dtb \
+	imx7s-colibri-aster.dtb \
+	imx7s-colibri-eval-v3.dtb \
+	imx7s-colibri-iris.dtb \
+	imx7s-colibri-iris-v2.dtb \
+	imx7s-mba7.dtb \
+	imx7s-warp.dtb
+dtb-$(CONFIG_SOC_IMX7ULP) += \
+	imx7ulp-com.dtb \
+	imx7ulp-evk.dtb
+dtb-$(CONFIG_SOC_IMXRT) += \
+	imxrt1050-evk.dtb
diff --git a/arch/arm/boot/dts/nxp/imx/e60k02.dtsi b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi
new file mode 100644
index 0000000000000..dd03e3860f97f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * and
+ * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
+ *
+ * Netronix E60K02 board common.
+ * This board is equipped with different SoCs and
+ * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
+ * the Tolino Shine 3 (with i.MX6SL)
+ */
+#include <dt-bindings/input/input.h>
+
+/ {
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "e60k02:white:on";
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		reg = <0x36>;
+		compatible = "ti,lm3630a";
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight_warm";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+
+		led@1 {
+			reg = <1>;
+			led-sources = <1>;
+			label = "backlight_cold";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&ldo5_reg>;
+	};
+
+	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
+
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3300000>;
+					regulator-suspend-min-microvolt = <3300000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			/* IR_3V3 */
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&snvs_rtc {
+	/* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4, through-hole */
+	status = "okay";
+};
+
+&uart4 {
+	/* TP198, next to J4, SMD pads */
+	status = "okay";
+};
+
+&usdhc2 {
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi
new file mode 100644
index 0000000000000..4e1bf080eaca0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * and
+ * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
+ *
+ * Netronix E70K02 board common.
+ * This board is equipped with different SoCs and
+ * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
+ * the Tolino Shine 3 (with i.MX6SL)
+ */
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-pageup {
+			label = "PageUp";
+			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PAGEUP>;
+		};
+
+		key-pagedown {
+			label = "PageDown";
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PAGEDOWN>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "e70k02:white:on";
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		reg = <0x36>;
+		compatible = "ti,lm3630a";
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight_warm";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+
+		led@1 {
+			reg = <1>;
+			led-sources = <1>;
+			label = "backlight_cold";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+
+	/* TODO: KX122 acceleration sensor a 0x1e */
+
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&ldo5_reg>;
+	};
+
+	/* TODO: SY7636 PMIC for E Ink at 0x62 */
+
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		reg = <0x32>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3300000>;
+					regulator-suspend-min-microvolt = <3300000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&snvs_rtc {
+	/* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx1-ads.dts b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
new file mode 100644
index 0000000000000..5833fb6f15d88
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+/dts-v1/;
+#include "imx1.dtsi"
+
+/ {
+	model = "Freescale MX1 ADS";
+	compatible = "fsl,imx1ads", "fsl,imx1";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@8000000 {
+		device_type = "memory";
+		reg = <0x08000000 0x04000000>;
+	};
+};
+
+&cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>;
+	cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c>;
+	status = "okay";
+
+	extgpio0: pcf8575@22 {
+		compatible = "nxp,pcf8575";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	extgpio1: pcf8575@24 {
+		compatible = "nxp,pcf8575";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	nor: nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <4>;
+		fsl,weim-cs-timing = <0x00003e00 0x00000801>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&iomuxc {
+	imx1-ads {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX1_PAD_SPI1_MISO__SPI1_MISO	0x0
+				MX1_PAD_SPI1_MOSI__SPI1_MOSI	0x0
+				MX1_PAD_SPI1_RDY__SPI1_RDY	0x0
+				MX1_PAD_SPI1_SCLK__SPI1_SCLK	0x0
+				MX1_PAD_SPI1_SS__GPIO3_15	0x0
+			>;
+		};
+
+		pinctrl_i2c: i2cgrp {
+			fsl,pins = <
+				MX1_PAD_I2C_SCL__I2C_SCL	0x0
+				MX1_PAD_I2C_SDA__I2C_SDA	0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX1_PAD_UART1_TXD__UART1_TXD	0x0
+				MX1_PAD_UART1_RXD__UART1_RXD	0x0
+				MX1_PAD_UART1_CTS__UART1_CTS	0x0
+				MX1_PAD_UART1_RTS__UART1_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX1_PAD_UART2_TXD__UART2_TXD	0x0
+				MX1_PAD_UART2_RXD__UART2_RXD	0x0
+				MX1_PAD_UART2_CTS__UART2_CTS	0x0
+				MX1_PAD_UART2_RTS__UART2_RTS	0x0
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX1_PAD_A0__A0			0x0
+				MX1_PAD_A16__A16		0x0
+				MX1_PAD_A17__A17		0x0
+				MX1_PAD_A18__A18		0x0
+				MX1_PAD_A19__A19		0x0
+				MX1_PAD_A20__A20		0x0
+				MX1_PAD_A21__A21		0x0
+				MX1_PAD_A22__A22		0x0
+				MX1_PAD_A23__A23		0x0
+				MX1_PAD_A24__A24		0x0
+				MX1_PAD_BCLK__BCLK		0x0
+				MX1_PAD_CS4__CS4		0x0
+				MX1_PAD_DTACK__DTACK		0x0
+				MX1_PAD_ECB__ECB		0x0
+				MX1_PAD_LBA__LBA		0x0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
new file mode 100644
index 0000000000000..77b21aa7a1469
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+/dts-v1/;
+#include "imx1.dtsi"
+
+/ {
+	model = "Armadeus APF9328";
+	compatible = "armadeus,imx1-apf9328", "fsl,imx1";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@8000000 {
+		device_type = "memory";
+		reg = <0x08000000 0x00800000>;
+	};
+};
+
+&i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	nor: nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00330e04 0x00000d01>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	eth: eth@4,c00000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth>;
+		compatible = "davicom,dm9000";
+		reg = <
+			4 0x00c00000 0x2
+			4 0x00c00002 0x2
+		>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		fsl,weim-cs-timing = <0x0000c700 0x19190d01>;
+	};
+};
+
+&iomuxc {
+	imx1-apf9328 {
+		pinctrl_eth: ethgrp {
+			fsl,pins = <
+				MX1_PAD_SIM_SVEN__GPIO2_14	0x0
+			>;
+		};
+
+		pinctrl_i2c: i2cgrp {
+			fsl,pins = <
+				MX1_PAD_I2C_SCL__I2C_SCL	0x0
+				MX1_PAD_I2C_SDA__I2C_SDA	0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX1_PAD_UART1_TXD__UART1_TXD	0x0
+				MX1_PAD_UART1_RXD__UART1_RXD	0x0
+				MX1_PAD_UART1_CTS__UART1_CTS	0x0
+				MX1_PAD_UART1_RTS__UART1_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX1_PAD_UART2_TXD__UART2_TXD	0x0
+				MX1_PAD_UART2_RXD__UART2_RXD	0x0
+				MX1_PAD_UART2_CTS__UART2_CTS	0x0
+				MX1_PAD_UART2_RTS__UART2_RTS	0x0
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX1_PAD_A0__A0			0x0
+				MX1_PAD_A16__A16		0x0
+				MX1_PAD_A17__A17		0x0
+				MX1_PAD_A18__A18		0x0
+				MX1_PAD_A19__A19		0x0
+				MX1_PAD_A20__A20		0x0
+				MX1_PAD_A21__A21		0x0
+				MX1_PAD_A22__A22		0x0
+				MX1_PAD_A23__A23		0x0
+				MX1_PAD_A24__A24		0x0
+				MX1_PAD_BCLK__BCLK		0x0
+				MX1_PAD_CS4__CS4		0x0
+				MX1_PAD_DTACK__DTACK		0x0
+				MX1_PAD_ECB__ECB		0x0
+				MX1_PAD_LBA__LBA		0x0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx1-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx1-pinfunc.h
new file mode 100644
index 0000000000000..bd2e679cb26c0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx1-pinfunc.h
@@ -0,0 +1,296 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#ifndef __DTS_IMX1_PINFUNC_H
+#define __DTS_IMX1_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <pin mux_id>
+ * mux_id consists of
+ * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ *
+ * function:      0 - Primary function
+ *                1 - Alternate function
+ *                2 - GPIO
+ * direction:     0 - Input
+ *                1 - Output
+ * gpio_oconf:    0 - A_IN
+ *                1 - B_IN
+ *                2 - A_OUT
+ *                3 - Data Register
+ * gpio_iconfa/b: 0 - GPIO_IN
+ *                1 - Interrupt Status Register
+ *                2 - 0
+ *                3 - 1
+ *
+ * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is
+ * the pin number on the specific port (between 0 and 31).
+ */
+
+#define MX1_PAD_A24__A24			0x00 0x004
+#define MX1_PAD_A24__GPIO1_0			0x00 0x032
+#define MX1_PAD_A24__SPI2_CLK			0x00 0x006
+#define MX1_PAD_TIN__TIN			0x01 0x000
+#define MX1_PAD_TIN__GPIO1_1			0x01 0x032
+#define MX1_PAD_TIN__SPI2_RXD			0x01 0x022
+#define MX1_PAD_PWMO__PWMO			0x02 0x004
+#define MX1_PAD_PWMO__GPIO1_2			0x02 0x032
+#define MX1_PAD_CSI_MCLK__CSI_MCLK		0x03 0x004
+#define MX1_PAD_CSI_MCLK__GPIO1_3		0x03 0x032
+#define MX1_PAD_CSI_D0__CSI_D0			0x04 0x000
+#define MX1_PAD_CSI_D0__GPIO1_4			0x04 0x032
+#define MX1_PAD_CSI_D1__CSI_D1			0x05 0x000
+#define MX1_PAD_CSI_D1__GPIO1_5			0x05 0x032
+#define MX1_PAD_CSI_D2__CSI_D2			0x06 0x000
+#define MX1_PAD_CSI_D2__GPIO1_6			0x06 0x032
+#define MX1_PAD_CSI_D3__CSI_D3			0x07 0x000
+#define MX1_PAD_CSI_D3__GPIO1_7			0x07 0x032
+#define MX1_PAD_CSI_D4__CSI_D4			0x08 0x000
+#define MX1_PAD_CSI_D4__GPIO1_8			0x08 0x032
+#define MX1_PAD_CSI_D5__CSI_D5			0x09 0x000
+#define MX1_PAD_CSI_D5__GPIO1_9			0x09 0x032
+#define MX1_PAD_CSI_D6__CSI_D6			0x0a 0x000
+#define MX1_PAD_CSI_D6__GPIO1_10		0x0a 0x032
+#define MX1_PAD_CSI_D7__CSI_D7			0x0b 0x000
+#define MX1_PAD_CSI_D7__GPIO1_11		0x0b 0x032
+#define MX1_PAD_CSI_VSYNC__CSI_VSYNC		0x0c 0x000
+#define MX1_PAD_CSI_VSYNC__GPIO1_12		0x0c 0x032
+#define MX1_PAD_CSI_HSYNC__CSI_HSYNC		0x0d 0x000
+#define MX1_PAD_CSI_HSYNC__GPIO1_13		0x0d 0x032
+#define MX1_PAD_CSI_PIXCLK__CSI_PIXCLK		0x0e 0x000
+#define MX1_PAD_CSI_PIXCLK__GPIO1_14		0x0e 0x032
+#define MX1_PAD_I2C_SDA__I2C_SDA		0x0f 0x000
+#define MX1_PAD_I2C_SDA__GPIO1_15		0x0f 0x032
+#define MX1_PAD_I2C_SCL__I2C_SCL		0x10 0x004
+#define MX1_PAD_I2C_SCL__GPIO1_16		0x10 0x032
+#define MX1_PAD_DTACK__DTACK			0x11 0x000
+#define MX1_PAD_DTACK__GPIO1_17			0x11 0x032
+#define MX1_PAD_DTACK__SPI2_SS			0x11 0x002
+#define MX1_PAD_DTACK__A25			0x11 0x016
+#define MX1_PAD_BCLK__BCLK			0x12 0x004
+#define MX1_PAD_BCLK__GPIO1_18			0x12 0x032
+#define MX1_PAD_LBA__LBA			0x13 0x004
+#define MX1_PAD_LBA__GPIO1_19			0x13 0x032
+#define MX1_PAD_ECB__ECB			0x14 0x000
+#define MX1_PAD_ECB__GPIO1_20			0x14 0x032
+#define MX1_PAD_A0__A0				0x15 0x004
+#define MX1_PAD_A0__GPIO1_21			0x15 0x032
+#define MX1_PAD_CS4__CS4			0x16 0x004
+#define MX1_PAD_CS4__GPIO1_22			0x16 0x032
+#define MX1_PAD_CS5__CS5			0x17 0x004
+#define MX1_PAD_CS5__GPIO1_23			0x17 0x032
+#define MX1_PAD_A16__A16			0x18 0x004
+#define MX1_PAD_A16__GPIO1_24			0x18 0x032
+#define MX1_PAD_A17__A17			0x19 0x004
+#define MX1_PAD_A17__GPIO1_25			0x19 0x032
+#define MX1_PAD_A18__A18			0x1a 0x004
+#define MX1_PAD_A18__GPIO1_26			0x1a 0x032
+#define MX1_PAD_A19__A19			0x1b 0x004
+#define MX1_PAD_A19__GPIO1_27			0x1b 0x032
+#define MX1_PAD_A20__A20			0x1c 0x004
+#define MX1_PAD_A20__GPIO1_28			0x1c 0x032
+#define MX1_PAD_A21__A21			0x1d 0x004
+#define MX1_PAD_A21__GPIO1_29			0x1d 0x032
+#define MX1_PAD_A22__A22			0x1e 0x004
+#define MX1_PAD_A22__GPIO1_30			0x1e 0x032
+#define MX1_PAD_A23__A23			0x1f 0x004
+#define MX1_PAD_A23__GPIO1_31			0x1f 0x032
+#define MX1_PAD_SD_DAT0__SD_DAT0		0x28 0x000
+#define MX1_PAD_SD_DAT0__MS_PI0			0x28 0x001
+#define MX1_PAD_SD_DAT0__GPIO2_8		0x28 0x032
+#define MX1_PAD_SD_DAT1__SD_DAT1		0x29 0x000
+#define MX1_PAD_SD_DAT1__MS_PI1			0x29 0x001
+#define MX1_PAD_SD_DAT1__GPIO2_9		0x29 0x032
+#define MX1_PAD_SD_DAT2__SD_DAT2		0x2a 0x000
+#define MX1_PAD_SD_DAT2__MS_SCLKI		0x2a 0x001
+#define MX1_PAD_SD_DAT2__GPIO2_10		0x2a 0x032
+#define MX1_PAD_SD_DAT3__SD_DAT3		0x2b 0x000
+#define MX1_PAD_SD_DAT3__MS_SDIO		0x2b 0x001
+#define MX1_PAD_SD_DAT3__GPIO2_11		0x2b 0x032
+#define MX1_PAD_SD_SCLK__SD_SCLK		0x2c 0x004
+#define MX1_PAD_SD_SCLK__MS_SCLKO		0x2c 0x005
+#define MX1_PAD_SD_SCLK__GPIO2_12		0x2c 0x032
+#define MX1_PAD_SD_CMD__SD_CMD			0x2d 0x000
+#define MX1_PAD_SD_CMD__MS_BS			0x2d 0x005
+#define MX1_PAD_SD_CMD__GPIO2_13		0x2d 0x032
+#define MX1_PAD_SIM_SVEN__SIM_SVEN		0x2e 0x004
+#define MX1_PAD_SIM_SVEN__SSI_RXFS		0x2e 0x001
+#define MX1_PAD_SIM_SVEN__GPIO2_14		0x2e 0x032
+#define MX1_PAD_SIM_PD__SIM_PD			0x2f 0x000
+#define MX1_PAD_SIM_PD__SSI_RXCLK		0x2f 0x001
+#define MX1_PAD_SIM_PD__GPIO2_15		0x2f 0x032
+#define MX1_PAD_SIM_TX__SIM_TX			0x30 0x000
+#define MX1_PAD_SIM_TX__SSI_RXDAT		0x30 0x001
+#define MX1_PAD_SIM_TX__GPIO2_16		0x30 0x032
+#define MX1_PAD_SIM_RX__SIM_RX			0x31 0x000
+#define MX1_PAD_SIM_RX__SSI_TXDAT		0x31 0x005
+#define MX1_PAD_SIM_RX__GPIO2_17		0x31 0x032
+#define MX1_PAD_SIM_RST__SIM_RST		0x32 0x004
+#define MX1_PAD_SIM_RST__SSI_TXFS		0x32 0x001
+#define MX1_PAD_SIM_RST__GPIO2_18		0x32 0x032
+#define MX1_PAD_SIM_CLK__SIM_CLK		0x33 0x004
+#define MX1_PAD_SIM_CLK__SSI_TXCLK		0x33 0x001
+#define MX1_PAD_SIM_CLK__GPIO2_19		0x33 0x032
+#define MX1_PAD_USBD_AFE__USBD_AFE		0x34 0x004
+#define MX1_PAD_USBD_AFE__GPIO2_20		0x34 0x032
+#define MX1_PAD_USBD_OE__USBD_OE		0x35 0x004
+#define MX1_PAD_USBD_OE__GPIO2_21		0x35 0x032
+#define MX1_PAD_USBD_RCV__USBD_RCV		0x36 0x000
+#define MX1_PAD_USBD_RCV__GPIO2_22		0x36 0x032
+#define MX1_PAD_USBD_SUSPND__USBD_SUSPND	0x37 0x004
+#define MX1_PAD_USBD_SUSPND__GPIO2_23		0x37 0x032
+#define MX1_PAD_USBD_VP__USBD_VP		0x38 0x000
+#define MX1_PAD_USBD_VP__GPIO2_24		0x38 0x032
+#define MX1_PAD_USBD_VM__USBD_VM		0x39 0x000
+#define MX1_PAD_USBD_VM__GPIO2_25		0x39 0x032
+#define MX1_PAD_USBD_VPO__USBD_VPO		0x3a 0x004
+#define MX1_PAD_USBD_VPO__GPIO2_26		0x3a 0x032
+#define MX1_PAD_USBD_VMO__USBD_VMO		0x3b 0x004
+#define MX1_PAD_USBD_VMO__GPIO2_27		0x3b 0x032
+#define MX1_PAD_UART2_CTS__UART2_CTS		0x3c 0x004
+#define MX1_PAD_UART2_CTS__GPIO2_28		0x3c 0x032
+#define MX1_PAD_UART2_RTS__UART2_RTS		0x3d 0x000
+#define MX1_PAD_UART2_RTS__GPIO2_29		0x3d 0x032
+#define MX1_PAD_UART2_TXD__UART2_TXD		0x3e 0x004
+#define MX1_PAD_UART2_TXD__GPIO2_30		0x3e 0x032
+#define MX1_PAD_UART2_RXD__UART2_RXD		0x3f 0x000
+#define MX1_PAD_UART2_RXD__GPIO2_31		0x3f 0x032
+#define MX1_PAD_SSI_RXFS__SSI_RXFS		0x43 0x000
+#define MX1_PAD_SSI_RXFS__GPIO3_3		0x43 0x032
+#define MX1_PAD_SSI_RXCLK__SSI_RXCLK		0x44 0x000
+#define MX1_PAD_SSI_RXCLK__GPIO3_4		0x44 0x032
+#define MX1_PAD_SSI_RXDAT__SSI_RXDAT		0x45 0x000
+#define MX1_PAD_SSI_RXDAT__GPIO3_5		0x45 0x032
+#define MX1_PAD_SSI_TXDAT__SSI_TXDAT		0x46 0x004
+#define MX1_PAD_SSI_TXDAT__GPIO3_6		0x46 0x032
+#define MX1_PAD_SSI_TXFS__SSI_TXFS		0x47 0x000
+#define MX1_PAD_SSI_TXFS__GPIO3_7		0x47 0x032
+#define MX1_PAD_SSI_TXCLK__SSI_TXCLK		0x48 0x000
+#define MX1_PAD_SSI_TXCLK__GPIO3_8		0x48 0x032
+#define MX1_PAD_UART1_CTS__UART1_CTS		0x49 0x004
+#define MX1_PAD_UART1_CTS__GPIO3_9		0x49 0x032
+#define MX1_PAD_UART1_RTS__UART1_RTS		0x4a 0x000
+#define MX1_PAD_UART1_RTS__GPIO3_10		0x4a 0x032
+#define MX1_PAD_UART1_TXD__UART1_TXD		0x4b 0x004
+#define MX1_PAD_UART1_TXD__GPIO3_11		0x4b 0x032
+#define MX1_PAD_UART1_RXD__UART1_RXD		0x4c 0x000
+#define MX1_PAD_UART1_RXD__GPIO3_12		0x4c 0x032
+#define MX1_PAD_SPI1_RDY__SPI1_RDY		0x4d 0x000
+#define MX1_PAD_SPI1_RDY__GPIO3_13		0x4d 0x032
+#define MX1_PAD_SPI1_SCLK__SPI1_SCLK		0x4e 0x004
+#define MX1_PAD_SPI1_SCLK__GPIO3_14		0x4e 0x032
+#define MX1_PAD_SPI1_SS__SPI1_SS		0x4f 0x000
+#define MX1_PAD_SPI1_SS__GPIO3_15		0x4f 0x032
+#define MX1_PAD_SPI1_MISO__SPI1_MISO		0x50 0x000
+#define MX1_PAD_SPI1_MISO__GPIO3_16		0x50 0x032
+#define MX1_PAD_SPI1_MOSI__SPI1_MOSI		0x51 0x004
+#define MX1_PAD_SPI1_MOSI__GPIO3_17		0x51 0x032
+#define MX1_PAD_BT13__BT13			0x53 0x004
+#define MX1_PAD_BT13__SSI2_RXCLK		0x53 0x001
+#define MX1_PAD_BT13__GPIO3_19			0x53 0x032
+#define MX1_PAD_BT12__BT12			0x54 0x004
+#define MX1_PAD_BT12__SSI2_TXFS			0x54 0x001
+#define MX1_PAD_BT12__GPIO3_20			0x54 0x032
+#define MX1_PAD_BT11__BT11			0x55 0x004
+#define MX1_PAD_BT11__SSI2_TXCLK		0x55 0x001
+#define MX1_PAD_BT11__GPIO3_21			0x55 0x032
+#define MX1_PAD_BT10__BT10			0x56 0x004
+#define MX1_PAD_BT10__SSI2_TX			0x56 0x001
+#define MX1_PAD_BT10__GPIO3_22			0x56 0x032
+#define MX1_PAD_BT9__BT9			0x57 0x004
+#define MX1_PAD_BT9__SSI2_RX			0x57 0x001
+#define MX1_PAD_BT9__GPIO3_23			0x57 0x032
+#define MX1_PAD_BT8__BT8			0x58 0x004
+#define MX1_PAD_BT8__SSI2_RXFS			0x58 0x001
+#define MX1_PAD_BT8__GPIO3_24			0x58 0x032
+#define MX1_PAD_BT8__UART3_RI			0x58 0x016
+#define MX1_PAD_BT7__BT7			0x59 0x004
+#define MX1_PAD_BT7__GPIO3_25			0x59 0x032
+#define MX1_PAD_BT7__UART3_DSR			0x59 0x016
+#define MX1_PAD_BT6__BT6			0x5a 0x004
+#define MX1_PAD_BT6__GPIO3_26			0x5a 0x032
+#define MX1_PAD_BT6__SPI2_SS3			0x5a 0x016
+#define MX1_PAD_BT6__UART3_DTR			0x5a 0x022
+#define MX1_PAD_BT5__BT5			0x5b 0x000
+#define MX1_PAD_BT5__GPIO3_27			0x5b 0x032
+#define MX1_PAD_BT5__UART3_DCD			0x5b 0x016
+#define MX1_PAD_BT4__BT4			0x5c 0x000
+#define MX1_PAD_BT4__GPIO3_28			0x5c 0x032
+#define MX1_PAD_BT4__UART3_CTS			0x5c 0x016
+#define MX1_PAD_BT3__BT3			0x5d 0x000
+#define MX1_PAD_BT3__GPIO3_29			0x5d 0x032
+#define MX1_PAD_BT3__UART3_RTS			0x5d 0x022
+#define MX1_PAD_BT2__BT2			0x5e 0x004
+#define MX1_PAD_BT2__GPIO3_30			0x5e 0x032
+#define MX1_PAD_BT2__UART3_TX			0x5e 0x016
+#define MX1_PAD_BT1__BT1			0x5f 0x000
+#define MX1_PAD_BT1__GPIO3_31			0x5f 0x032
+#define MX1_PAD_BT1__UART3_RX			0x5f 0x022
+#define MX1_PAD_LSCLK__LSCLK			0x66 0x004
+#define MX1_PAD_LSCLK__GPIO4_6			0x66 0x032
+#define MX1_PAD_REV__REV			0x67 0x004
+#define MX1_PAD_REV__UART2_DTR			0x67 0x001
+#define MX1_PAD_REV__GPIO4_7			0x67 0x032
+#define MX1_PAD_REV__SPI2_CLK			0x67 0x006
+#define MX1_PAD_CLS__CLS			0x68 0x004
+#define MX1_PAD_CLS__UART2_DCD			0x68 0x005
+#define MX1_PAD_CLS__GPIO4_8			0x68 0x032
+#define MX1_PAD_CLS__SPI2_SS			0x68 0x002
+#define MX1_PAD_PS__PS				0x69 0x004
+#define MX1_PAD_PS__UART2_RI			0x69 0x005
+#define MX1_PAD_PS__GPIO4_9			0x69 0x032
+#define MX1_PAD_PS__SPI2_RXD			0x69 0x022
+#define MX1_PAD_SPL_SPR__SPL_SPR		0x6a 0x004
+#define MX1_PAD_SPL_SPR__UART2_DSR		0x6a 0x005
+#define MX1_PAD_SPL_SPR__GPIO4_10		0x6a 0x032
+#define MX1_PAD_SPL_SPR__SPI2_TXD		0x6a 0x006
+#define MX1_PAD_CONTRAST__CONTRAST		0x6b 0x004
+#define MX1_PAD_CONTRAST__GPIO4_11		0x6b 0x032
+#define MX1_PAD_CONTRAST__SPI2_SS2		0x6b 0x012
+#define MX1_PAD_ACD_OE__ACD_OE			0x6c 0x004
+#define MX1_PAD_ACD_OE__GPIO4_12		0x6c 0x032
+#define MX1_PAD_LP_HSYNC__LP_HSYNC		0x6d 0x004
+#define MX1_PAD_LP_HSYNC__GPIO4_13		0x6d 0x032
+#define MX1_PAD_FLM_VSYNC__FLM_VSYNC		0x6e 0x004
+#define MX1_PAD_FLM_VSYNC__GPIO4_14		0x6e 0x032
+#define MX1_PAD_LD0__LD0			0x6f 0x004
+#define MX1_PAD_LD0__GPIO4_15			0x6f 0x032
+#define MX1_PAD_LD1__LD1			0x70 0x004
+#define MX1_PAD_LD1__GPIO4_16			0x70 0x032
+#define MX1_PAD_LD2__LD2			0x71 0x004
+#define MX1_PAD_LD2__GPIO4_17			0x71 0x032
+#define MX1_PAD_LD3__LD3			0x72 0x004
+#define MX1_PAD_LD3__GPIO4_18			0x72 0x032
+#define MX1_PAD_LD4__LD4			0x73 0x004
+#define MX1_PAD_LD4__GPIO4_19			0x73 0x032
+#define MX1_PAD_LD5__LD5			0x74 0x004
+#define MX1_PAD_LD5__GPIO4_20			0x74 0x032
+#define MX1_PAD_LD6__LD6			0x75 0x004
+#define MX1_PAD_LD6__GPIO4_21			0x75 0x032
+#define MX1_PAD_LD7__LD7			0x76 0x004
+#define MX1_PAD_LD7__GPIO4_22			0x76 0x032
+#define MX1_PAD_LD8__LD8			0x77 0x004
+#define MX1_PAD_LD8__GPIO4_23			0x77 0x032
+#define MX1_PAD_LD9__LD9			0x78 0x004
+#define MX1_PAD_LD9__GPIO4_24			0x78 0x032
+#define MX1_PAD_LD10__LD10			0x79 0x004
+#define MX1_PAD_LD10__GPIO4_25			0x79 0x032
+#define MX1_PAD_LD11__LD11			0x7a 0x004
+#define MX1_PAD_LD11__GPIO4_26			0x7a 0x032
+#define MX1_PAD_LD12__LD12			0x7b 0x004
+#define MX1_PAD_LD12__GPIO4_27			0x7b 0x032
+#define MX1_PAD_LD13__LD13			0x7c 0x004
+#define MX1_PAD_LD13__GPIO4_28			0x7c 0x032
+#define MX1_PAD_LD14__LD14			0x7d 0x004
+#define MX1_PAD_LD14__GPIO4_29			0x7d 0x032
+#define MX1_PAD_LD15__LD15			0x7e 0x004
+#define MX1_PAD_LD15__GPIO4_30			0x7e 0x032
+#define MX1_PAD_TMR2OUT__TMR2OUT		0x7f 0x000
+#define MX1_PAD_TMR2OUT__GPIO4_31		0x7f 0x032
+#define MX1_PAD_TMR2OUT__SPI2_TXD		0x7f 0x006
+
+#endif
diff --git a/arch/arm/boot/dts/nxp/imx/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
new file mode 100644
index 0000000000000..e312f1e74e2fe
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+
+#include "imx1-pinfunc.h"
+
+#include <dt-bindings/clock/imx1-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &i2c;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &cspi1;
+		spi1 = &cspi2;
+	};
+
+	aitc: aitc-interrupt-controller@223000 {
+		compatible = "fsl,imx1-aitc", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x00223000 0x1000>;
+	};
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			compatible = "arm,arm920t";
+			operating-points = <200000 1900000>;
+			clock-latency = <62500>;
+			clocks = <&clks IMX1_CLK_MCU>;
+			voltage-tolerance = <5>;
+		};
+	};
+
+	clocks {
+		clk32 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&aitc>;
+		ranges;
+
+		aipi@200000 {
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00200000 0x10000>;
+			ranges;
+
+			gpt1: timer@202000 {
+				compatible = "fsl,imx1-gpt";
+				reg = <0x00202000 0x1000>;
+				interrupts = <59>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: timer@203000 {
+				compatible = "fsl,imx1-gpt";
+				reg = <0x00203000 0x1000>;
+				interrupts = <58>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+			};
+
+			fb: fb@205000 {
+				compatible = "fsl,imx1-fb";
+				reg = <0x00205000 0x1000>;
+				interrupts = <14>;
+				clocks = <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_PER2>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			uart1: serial@206000 {
+				compatible = "fsl,imx1-uart";
+				reg = <0x00206000 0x1000>;
+				interrupts = <30 29 26>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@207000 {
+				compatible = "fsl,imx1-uart";
+				reg = <0x00207000 0x1000>;
+				interrupts = <24 23 20>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm: pwm@208000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx1-pwm";
+				reg = <0x00208000 0x1000>;
+				interrupts = <34>;
+				clocks = <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+			};
+
+			dma: dma@209000 {
+				compatible = "fsl,imx1-dma";
+				reg = <0x00209000 0x1000>;
+				interrupts = <61 60>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_DMA_GATE>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <1>;
+			};
+
+			uart3: serial@20a000 {
+				compatible = "fsl,imx1-uart";
+				reg = <0x0020a000 0x1000>;
+				interrupts = <54 4 1>;
+				clocks = <&clks IMX1_CLK_UART3_GATE>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		aipi@210000 {
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00210000 0x10000>;
+			ranges;
+
+			cspi1: spi@213000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx1-cspi";
+				reg = <0x00213000 0x1000>;
+				interrupts = <41>;
+				clocks = <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c: i2c@217000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx1-i2c";
+				reg = <0x00217000 0x1000>;
+				interrupts = <39>;
+				clocks = <&clks IMX1_CLK_HCLK>;
+				status = "disabled";
+			};
+
+			cspi2: spi@219000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx1-cspi";
+				reg = <0x00219000 0x1000>;
+				interrupts = <40>;
+				clocks = <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			clks: ccm@21b000 {
+				compatible = "fsl,imx1-ccm";
+				reg = <0x0021b000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			iomuxc: iomuxc@21c000 {
+				compatible = "fsl,imx1-iomuxc";
+				reg = <0x0021c000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				gpio1: gpio@21c000 {
+					compatible = "fsl,imx1-gpio";
+					reg = <0x0021c000 0x100>;
+					interrupts = <11>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@21c100 {
+					compatible = "fsl,imx1-gpio";
+					reg = <0x0021c100 0x100>;
+					interrupts = <12>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio@21c200 {
+					compatible = "fsl,imx1-gpio";
+					reg = <0x0021c200 0x100>;
+					interrupts = <13>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio@21c300 {
+					compatible = "fsl,imx1-gpio";
+					reg = <0x0021c300 0x100>;
+					interrupts = <62>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+			};
+		};
+
+		weim: weim@220000 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "fsl,imx1-weim";
+			reg = <0x00220000 0x1000>;
+			clocks = <&clks IMX1_CLK_DUMMY>;
+			ranges = <
+				0 0 0x10000000 0x02000000
+				1 0 0x12000000 0x01000000
+				2 0 0x13000000 0x01000000
+				3 0 0x14000000 0x01000000
+				4 0 0x15000000 0x01000000
+				5 0 0x16000000 0x01000000
+			>;
+			status = "disabled";
+		};
+
+		esram: esram@300000 {
+			compatible = "mmio-sram";
+			reg = <0x00300000 0x20000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
new file mode 100644
index 0000000000000..0703f62d10d1c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx25.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX25";
+	compatible = "eukrea,cpuimx25", "fsl,imx25";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x4000000>; /* 64M */
+	};
+};
+
+&fec {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-cpuimx25 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
+				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
+				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
+				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
+				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
+				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
+				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
new file mode 100644
index 0000000000000..7d4301b22b902
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	cmo_qvga: display {
+		model = "CMO-QVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xcad08b80>;
+		bus-width = <18>;
+		display-timings {
+			native-mode = <&qvga_timings>;
+			qvga_timings: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <30>;
+				hfront-porch = <38>;
+				vback-porch = <20>;
+				vfront-porch = <3>;
+				hsync-len = <15>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_lcd_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
+		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
+		};
+	};
+};
+
+&lcdc {
+	display = <&cmo_qvga>;
+	fsl,lpccr = <0x00a903ff>;
+	lcd-supply = <&reg_lcd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
new file mode 100644
index 0000000000000..80a7f96de4c6a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the DVI-SVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	dvi_svga: display {
+		model = "DVI-SVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		display-timings {
+			native-mode = <&dvi_svga_timings>;
+			dvi_svga_timings: 800x600 {
+				clock-frequency = <40000000>;
+				hactive = <800>;
+				vactive = <600>;
+				hback-porch = <75>;
+				hfront-porch = <75>;
+				vback-porch = <7>;
+				vfront-porch = <75>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+			};
+		};
+	};
+};
+
+&lcdc {
+	display = <&dvi_svga>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
new file mode 100644
index 0000000000000..24027a1fb46d1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the DVI-VGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	dvi_vga: display {
+		model = "DVI-VGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		display-timings {
+			native-mode = <&dvi_vga_timings>;
+			dvi_vga_timings: 640x480 {
+				clock-frequency = <31250000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <100>;
+				hfront-porch = <100>;
+				vback-porch = <7>;
+				vfront-porch = <100>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+			};
+		};
+	};
+};
+
+&lcdc {
+	display = <&dvi_vga>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts
new file mode 100644
index 0000000000000..c7207ea437c40
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx25-eukrea-cpuimx25.dtsi"
+
+/ {
+	model = "Eukrea MBIMXSD25";
+	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		button {
+			label = "BP1";
+			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx25-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,mux-int-port = <1>;
+		fsl,mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX25_PAD_KPP_COL3__AUD5_TXFS		0xe0
+				MX25_PAD_KPP_COL2__AUD5_TXC		0xe0
+				MX25_PAD_KPP_COL1__AUD5_RXD		0xe0
+				MX25_PAD_KPP_COL0__AUD5_TXD		0xe0
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX25_PAD_SD1_CMD__ESDHC1_CMD		0x400000c0
+				MX25_PAD_SD1_CLK__ESDHC1_CLK		0x400000c0
+				MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x400000c0
+				MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x400000c0
+				MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x400000c0
+				MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x400000c0
+			>;
+		};
+
+		pinctrl_gpiokeys: gpiokeysgrp {
+			fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
+		};
+
+		pinctrl_gpioled: gpioledgrp {
+			fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
+		};
+
+		pinctrl_lcdc: lcdcgrp {
+			fsl,pins = <
+				MX25_PAD_LD0__LD0			0x1
+				MX25_PAD_LD1__LD1			0x1
+				MX25_PAD_LD2__LD2			0x1
+				MX25_PAD_LD3__LD3			0x1
+				MX25_PAD_LD4__LD4			0x1
+				MX25_PAD_LD5__LD5			0x1
+				MX25_PAD_LD6__LD6			0x1
+				MX25_PAD_LD7__LD7			0x1
+				MX25_PAD_LD8__LD8			0x1
+				MX25_PAD_LD9__LD9			0x1
+				MX25_PAD_LD10__LD10			0x1
+				MX25_PAD_LD11__LD11			0x1
+				MX25_PAD_LD12__LD12			0x1
+				MX25_PAD_LD13__LD13			0x1
+				MX25_PAD_LD14__LD14			0x1
+				MX25_PAD_LD15__LD15			0x1
+				MX25_PAD_GPIO_E__LD16			0x1
+				MX25_PAD_GPIO_F__LD17			0x1
+				MX25_PAD_HSYNC__HSYNC			0x80000000
+				MX25_PAD_VSYNC__VSYNC			0x80000000
+				MX25_PAD_LSCLK__LSCLK			0x80000000
+				MX25_PAD_OE_ACD__OE_ACD			0x80000000
+				MX25_PAD_CONTRAST__CONTRAST		0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
+				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
+				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
+				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX25_PAD_UART2_RXD__UART2_RXD		0x80000000
+				MX25_PAD_UART2_TXD__UART2_TXD		0x80000000
+				MX25_PAD_UART2_RTS__UART2_RTS		0x80000000
+				MX25_PAD_UART2_CTS__UART2_CTS		0x80000000
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	status = "okay";
+};
+
+&usbotg {
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-karo-tx25.dts b/arch/arm/boot/dts/nxp/imx/imx25-karo-tx25.dts
new file mode 100644
index 0000000000000..0950eb66d3d91
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx25-karo-tx25.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx25.dtsi"
+
+/ {
+	model = "Ka-Ro TX25";
+	compatible = "karo,imx25-tx25", "fsl,imx25";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_fec_phy: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "fec-phy";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 9 0>;
+			enable-active-high;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+			MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
+			MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
+			MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX25_PAD_D11__GPIO_4_9		0x80000000 /* FEC PHY power on pin */
+			MX25_PAD_D13__GPIO_4_7		0x80000000 /* FEC reset */
+			MX25_PAD_FEC_MDC__FEC_MDC	0x80000000
+			MX25_PAD_FEC_MDIO__FEC_MDIO	0x80000000
+			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x80000000
+			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x80000000
+			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x80000000
+			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x80000000
+			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x80000000
+			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x80000000
+			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x80000000
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			MX25_PAD_NF_CE0__NF_CE0		0x80000000
+			MX25_PAD_NFWE_B__NFWE_B		0x80000000
+			MX25_PAD_NFRE_B__NFRE_B		0x80000000
+			MX25_PAD_NFALE__NFALE		0x80000000
+			MX25_PAD_NFCLE__NFCLE		0x80000000
+			MX25_PAD_NFWP_B__NFWP_B		0x80000000
+			MX25_PAD_NFRB__NFRB		0x80000000
+			MX25_PAD_D7__D7			0x80000000
+			MX25_PAD_D6__D6			0x80000000
+			MX25_PAD_D5__D5			0x80000000
+			MX25_PAD_D4__D4			0x80000000
+			MX25_PAD_D3__D3			0x80000000
+			MX25_PAD_D2__D2			0x80000000
+			MX25_PAD_D1__D1			0x80000000
+			MX25_PAD_D0__D0			0x80000000
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_fec_phy>;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	nand-bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
new file mode 100644
index 0000000000000..fb66884d8a2fa
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx25.dtsi"
+
+/ {
+	model = "Freescale i.MX25 Product Development Kit";
+	compatible = "fsl,imx25-pdk", "fsl,imx25";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x4000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_fec_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "fec-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 3 0>;
+			enable-active-high;
+		};
+
+		reg_2p5v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		reg_can_3v3: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "can-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 6 0>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx25-pdk-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx25-pdk-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	wvga: display {
+		model = "CLAA057VC01CW";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		display-timings {
+			native-mode = <&wvga_timings>;
+			wvga_timings: 640x480 {
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <45>;
+				hfront-porch = <114>;
+				hsync-len = <1>;
+				vback-porch = <33>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+				clock-frequency = <25200000>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-supply = <&reg_fec_3v3>;
+	phy-reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 129>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	imx25-pdk {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX25_PAD_RW__AUD4_TXFS			0xe0
+				MX25_PAD_OE__AUD4_TXC			0xe0
+				MX25_PAD_EB0__AUD4_TXD			0xe0
+				MX25_PAD_EB1__AUD4_RXD			0xe0
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX25_PAD_GPIO_A__CAN1_TX		0x0
+				MX25_PAD_GPIO_B__CAN1_RX		0x0
+				MX25_PAD_D14__GPIO_4_6 			0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX25_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX25_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+				MX25_PAD_A14__GPIO_2_0			0x80000000
+				MX25_PAD_A15__GPIO_2_1			0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
+				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
+				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
+				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
+				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
+				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
+				MX25_PAD_A17__GPIO_2_3			0x80000000
+				MX25_PAD_D12__GPIO_4_8			0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
+				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX25_PAD_KPP_ROW0__KPP_ROW0	0x80000000
+				MX25_PAD_KPP_ROW1__KPP_ROW1	0x80000000
+				MX25_PAD_KPP_ROW2__KPP_ROW2	0x80000000
+				MX25_PAD_KPP_ROW3__KPP_ROW3	0x80000000
+				MX25_PAD_KPP_COL0__KPP_COL0	0x80000000
+				MX25_PAD_KPP_COL1__KPP_COL1	0x80000000
+				MX25_PAD_KPP_COL2__KPP_COL2	0x80000000
+				MX25_PAD_KPP_COL3__KPP_COL3	0x80000000
+			>;
+		};
+
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX25_PAD_LD0__LD0		0xe0
+				MX25_PAD_LD1__LD1		0xe0
+				MX25_PAD_LD2__LD2		0xe0
+				MX25_PAD_LD3__LD3		0xe0
+				MX25_PAD_LD4__LD4		0xe0
+				MX25_PAD_LD5__LD5		0xe0
+				MX25_PAD_LD6__LD6		0xe0
+				MX25_PAD_LD7__LD7		0xe0
+				MX25_PAD_LD8__LD8		0xe0
+				MX25_PAD_LD9__LD9		0xe0
+				MX25_PAD_LD10__LD10		0xe0
+				MX25_PAD_LD11__LD11		0xe0
+				MX25_PAD_LD12__LD12		0xe0
+				MX25_PAD_LD13__LD13		0xe0
+				MX25_PAD_LD14__LD14		0xe0
+				MX25_PAD_LD15__LD15		0xe0
+				MX25_PAD_GPIO_E__LD16		0xe0
+				MX25_PAD_GPIO_F__LD17		0xe0
+				MX25_PAD_HSYNC__HSYNC		0xe0
+				MX25_PAD_VSYNC__VSYNC		0xe0
+				MX25_PAD_LSCLK__LSCLK		0xe0
+				MX25_PAD_OE_ACD__OE_ACD		0xe0
+				MX25_PAD_CONTRAST__CONTRAST	0xe0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
+				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
+				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
+				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
+			>;
+		};
+	};
+};
+
+&lcdc {
+	display = <&wvga>;
+	fsl,lpccr = <0x00a903ff>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,dmacr = <0x00020010>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+};
+
+&nfc {
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+			MATRIX_KEY(0x0, 0x0, KEY_UP)
+			MATRIX_KEY(0x0, 0x1, KEY_DOWN)
+			MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN)
+			MATRIX_KEY(0x0, 0x3, KEY_HOME)
+			MATRIX_KEY(0x1, 0x0, KEY_RIGHT)
+			MATRIX_KEY(0x1, 0x1, KEY_LEFT)
+			MATRIX_KEY(0x1, 0x2, KEY_ENTER)
+			MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP)
+			MATRIX_KEY(0x2, 0x0, KEY_F6)
+			MATRIX_KEY(0x2, 0x1, KEY_F8)
+			MATRIX_KEY(0x2, 0x2, KEY_F9)
+			MATRIX_KEY(0x2, 0x3, KEY_F10)
+			MATRIX_KEY(0x3, 0x0, KEY_F1)
+			MATRIX_KEY(0x3, 0x1, KEY_F2)
+			MATRIX_KEY(0x3, 0x2, KEY_F3)
+			MATRIX_KEY(0x3, 0x2, KEY_POWER)
+	>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&tsc {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	status = "okay";
+};
+
+&usbotg {
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx25-pinfunc.h
new file mode 100644
index 0000000000000..908caf8103519
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx25-pinfunc.h
@@ -0,0 +1,652 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ * Based on imx35-pinfunc.h in the same directory Which is:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX25_PINFUNC_H
+#define __DTS_IMX25_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX25_PAD_A10__A10			0x008 0x000 0x000 0x00 0x000
+#define MX25_PAD_A10__GPIO_4_0			0x008 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_A13__A13			0x00c 0x22C 0x000 0x00 0x000
+#define MX25_PAD_A13__GPIO_4_1			0x00c 0x22C 0x000 0x05 0x000
+#define MX25_PAD_A13__LCDC_CLS			0x00c 0x22C 0x000 0x07 0x000
+
+#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x00 0x000
+#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x05 0x000
+#define MX25_PAD_A14__SIM1_CLK1			0x010 0x230 0x000 0x06 0x000
+#define MX25_PAD_A14__LCDC_SPL			0x010 0x230 0x000 0x07 0x000
+
+#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x00 0x000
+#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x05 0x000
+#define MX25_PAD_A15__SIM1_RST1			0x014 0x234 0x000 0x06 0x000
+#define MX25_PAD_A15__LCDC_PS			0x014 0x234 0x000 0x07 0x000
+
+#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x00 0x000
+#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x05 0x000
+#define MX25_PAD_A16__SIM1_VEN1			0x018 0x000 0x000 0x06 0x000
+#define MX25_PAD_A16__LCDC_REV			0x018 0x000 0x000 0x07 0x000
+
+#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x00 0x000
+#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x05 0x000
+#define MX25_PAD_A17__SIM1_TX			0x01c 0x238 0x554 0x06 0x000
+#define MX25_PAD_A17__FEC_TX_ERR		0x01c 0x238 0x000 0x07 0x000
+
+#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x00 0x000
+#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x05 0x000
+#define MX25_PAD_A18__SIM1_PD1			0x020 0x23c 0x550 0x06 0x000
+#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x07 0x000
+
+#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x00 0x000
+#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x05 0x000
+#define MX25_PAD_A19__SIM1_RX1			0x024 0x240 0x54c 0x06 0x000
+#define MX25_PAD_A19__FEC_RX_ERR		0x024 0x240 0x518 0x07 0x000
+
+#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x00 0x000
+#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x05 0x000
+#define MX25_PAD_A20__SIM2_CLK1			0x028 0x244 0x000 0x06 0x000
+#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x07 0x000
+
+#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x00 0x000
+#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x05 0x000
+#define MX25_PAD_A21__SIM2_RST1			0x02c 0x248 0x000 0x06 0x000
+#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x07 0x000
+
+#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x00 0x000
+#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x05 0x000
+#define MX25_PAD_A22__SIM2_VEN1			0x030 0x000 0x000 0x06 0x000
+#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x07 0x000
+
+#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x00 0x000
+#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x05 0x000
+#define MX25_PAD_A23__SIM2_TX1			0x034 0x24c 0x560 0x06 0x000
+#define MX25_PAD_A23__FEC_TDATA3		0x034 0x24c 0x000 0x07 0x000
+
+#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x00 0x000
+#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x05 0x000
+#define MX25_PAD_A24__SIM2_PD1			0x038 0x250 0x55c 0x06 0x000
+#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x07 0x000
+
+#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x00 0x000
+#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x05 0x000
+#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x07 0x000
+
+#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x00 0x000
+#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x04 0x000
+#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x05 0x000
+#define MX25_PAD_EB0__CSPI3_SS0			0x040 0x258 0x4bc 0x06 0x000
+
+#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x00 0x000
+#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x04 0x000
+#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x05 0x000
+#define MX25_PAD_EB1__CSPI3_SS1			0x044 0x25c 0x4c0 0x06 0x000
+
+#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x00 0x000
+#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x04 0x000
+#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x05 0x000
+
+#define MX25_PAD_CS0__CS0			0x04c 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS0__GPIO_4_2			0x04c 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS1__CS1			0x050 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS1__NF_CE3			0x050 0x000 0x000 0x01 0x000
+#define MX25_PAD_CS1__GPIO_4_3			0x050 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x00 0x000
+#define MX25_PAD_CS4__NF_CE1			0x054 0x264 0x000 0x01 0x000
+#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x03 0x000
+#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x05 0x000
+#define MX25_PAD_CS4__CSPI3_MOSI		0x054 0x264 0x4b8 0x06 0x000
+
+#define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x00 0x000
+#define MX25_PAD_CS5__NF_CE2			0x058 0x268 0x000 0x01 0x000
+#define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x03 0x000
+#define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x05 0x000
+#define MX25_PAD_CS5__CSPI3_MISO		0x058 0x268 0x4b4 0x06 0x000
+
+#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x00 0x000
+#define MX25_PAD_NF_CE0__CSPI1_SS3		0x05c 0x26c 0x490 0x01 0x000
+#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x05 0x000
+
+#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x00 0x000
+#define MX25_PAD_ECB__UART5_TXD			0x060 0x270 0x000 0x03 0x000
+#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x05 0x000
+#define MX25_PAD_ECB__CSPI3_SCLK		0x060 0x270 0x4ac 0x06 0x000
+
+#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x00 0x000
+#define MX25_PAD_LBA__UART5_RXD			0x064 0x274 0x578 0x03 0x000
+#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x05 0x000
+#define MX25_PAD_LBA__CSPI3_RDY			0x064 0x274 0x4b0 0x06 0x000
+
+#define MX25_PAD_BCLK__BCLK			0x068 0x000 0x000 0x00 0x000
+#define MX25_PAD_BCLK__GPIO_4_4			0x068 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x00 0x000
+#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x04 0x000
+#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x05 0x000
+
+#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x00 0x000
+#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x05 0x000
+
+#define MX25_PAD_D15__D15			0x088 0x280 0x000 0x00 0x000
+#define MX25_PAD_D15__LD16			0x088 0x280 0x000 0x01 0x000
+#define MX25_PAD_D15__GPIO_4_5			0x088 0x280 0x000 0x05 0x000
+#define MX25_PAD_D15__ESDHC1_DAT7		0x088 0x280 0x4d8 0x06 0x000
+
+#define MX25_PAD_D14__D14			0x08c 0x284 0x000 0x00 0x000
+#define MX25_PAD_D14__LD17			0x08c 0x284 0x000 0x01 0x000
+#define MX25_PAD_D14__GPIO_4_6			0x08c 0x284 0x000 0x05 0x000
+#define MX25_PAD_D14__ESDHC1_DAT6		0x08c 0x284 0x4d4 0x06 0x000
+
+#define MX25_PAD_D13__D13			0x090 0x288 0x000 0x00 0x000
+#define MX25_PAD_D13__LD18			0x090 0x288 0x000 0x01 0x000
+#define MX25_PAD_D13__GPIO_4_7			0x090 0x288 0x000 0x05 0x000
+#define MX25_PAD_D13__ESDHC1_DAT5		0x090 0x288 0x4d0 0x06 0x000
+
+#define MX25_PAD_D12__D12			0x094 0x28c 0x000 0x00 0x000
+#define MX25_PAD_D12__GPIO_4_8			0x094 0x28c 0x000 0x05 0x000
+#define MX25_PAD_D12__ESDHC1_DAT4		0x094 0x28c 0x4cc 0x06 0x000
+
+#define MX25_PAD_D11__D11			0x098 0x290 0x000 0x00 0x000
+#define MX25_PAD_D11__GPIO_4_9			0x098 0x290 0x000 0x05 0x000
+#define MX25_PAD_D11__USBOTG_PWR		0x098 0x290 0x000 0x06 0x000
+
+#define MX25_PAD_D10__D10			0x09c 0x294 0x000 0x00 0x000
+#define MX25_PAD_D10__GPIO_4_10			0x09c 0x294 0x000 0x05 0x000
+#define MX25_PAD_D10__USBOTG_OC			0x09c 0x294 0x57c 0x06 0x000
+
+#define MX25_PAD_D9__D9				0x0a0 0x298 0x000 0x00 0x000
+#define MX25_PAD_D9__GPIO_4_11			0x0a0 0x298 0x000 0x05 0x000
+#define MX25_PAD_D9__USBH2_PWR			0x0a0 0x298 0x000 0x06 0x000
+
+#define MX25_PAD_D8__D8				0x0a4 0x29c 0x000 0x00 0x000
+#define MX25_PAD_D8__GPIO_4_12			0x0a4 0x29c 0x000 0x05 0x000
+#define MX25_PAD_D8__USBH2_OC			0x0a4 0x29c 0x580 0x06 0x000
+
+#define MX25_PAD_D7__D7				0x0a8 0x2a0 0x000 0x00 0x000
+#define MX25_PAD_D7__GPIO_4_13			0x0a8 0x2a0 0x000 0x05 0x000
+
+#define MX25_PAD_D6__D6				0x0ac 0x2a4 0x000 0x00 0x000
+#define MX25_PAD_D6__GPIO_4_14			0x0ac 0x2a4 0x000 0x05 0x000
+
+#define MX25_PAD_D5__D5				0x0b0 0x2a8 0x000 0x00 0x000
+#define MX25_PAD_D5__GPIO_4_15			0x0b0 0x2a8 0x000 0x05 0x000
+
+#define MX25_PAD_D4__D4				0x0b4 0x2ac 0x000 0x00 0x000
+#define MX25_PAD_D4__GPIO_4_16			0x0b4 0x2ac 0x000 0x05 0x000
+
+#define MX25_PAD_D3__D3				0x0b8 0x2b0 0x000 0x00 0x000
+#define MX25_PAD_D3__GPIO_4_17			0x0b8 0x2b0 0x000 0x05 0x000
+
+#define MX25_PAD_D2__D2				0x0bc 0x2b4 0x000 0x00 0x000
+#define MX25_PAD_D2__GPIO_4_18			0x0bc 0x2b4 0x000 0x05 0x000
+
+#define MX25_PAD_D1__D1				0x0c0 0x2b8 0x000 0x00 0x000
+#define MX25_PAD_D1__GPIO_4_19			0x0c0 0x2b8 0x000 0x05 0x000
+
+#define MX25_PAD_D0__D0				0x0c4 0x2bc 0x000 0x00 0x000
+#define MX25_PAD_D0__GPIO_4_20			0x0c4 0x2bc 0x000 0x05 0x000
+
+#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x00 0x000
+#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x02 0x000
+#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x05 0x000
+
+#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x00 0x000
+#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x02 0x000
+#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x05 0x000
+
+#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x00 0x000
+#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x05 0x000
+
+#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x00 0x000
+#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x05 0x000
+
+#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x00 0x000
+#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x05 0x000
+
+#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x00 0x000
+#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x05 0x000
+
+#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x00 0x000
+#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x05 0x000
+
+#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x00 0x000
+#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x05 0x000
+
+#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x00 0x000
+#define MX25_PAD_LD8__UART4_RXD			0x0e8 0x2e0 0x570 0x02 0x000
+#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x05 0x000
+/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
+#define MX25_PAD_LD8__ESDHC2_CMD		0x0e8 0x2e0 0x4e0 0x16 0x000
+
+#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x00 0x000
+#define MX25_PAD_LD9__UART4_TXD			0x0ec 0x2e4 0x000 0x02 0x000
+#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x05 0x001
+#define MX25_PAD_LD9__ESDHC2_CLK		0x0ec 0x2e4 0x4dc 0x06 0x000
+
+#define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x00 0x000
+#define MX25_PAD_LD10__UART4_RTS		0x0f0 0x2e8 0x56c 0x02 0x000
+#define MX25_PAD_LD10__FEC_RX_ERR		0x0f0 0x2e8 0x518 0x05 0x001
+
+#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x00 0x000
+#define MX25_PAD_LD11__UART4_CTS		0x0f4 0x2ec 0x000 0x02 0x000
+#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x05 0x001
+#define MX25_PAD_LD11__ESDHC2_DAT1		0x0f4 0x2ec 0x4e8 0x06 0x000
+
+#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x00 0x000
+#define MX25_PAD_LD12__CSPI2_MOSI		0x0f8 0x2f0 0x4a0 0x02 0x000
+#define MX25_PAD_LD12__KPP_ROW6			0x0f8 0x2f0 0x544 0x04 0x000
+#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x05 0x001
+
+#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x00 0x000
+#define MX25_PAD_LD13__CSPI2_MISO		0x0fc 0x2f4 0x49c 0x02 0x000
+#define MX25_PAD_LD13__KPP_ROW7			0x0fc 0x2f4 0x548 0x04 0x000
+#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x05 0x000
+
+#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x00 0x000
+#define MX25_PAD_LD14__CSPI2_SCLK		0x100 0x2f8 0x494 0x02 0x000
+#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x05 0x000
+
+#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x00 0x000
+#define MX25_PAD_LD15__CSPI2_RDY		0x104 0x2fc 0x498 0x02 0x000
+#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x05 0x001
+
+#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x00 0x000
+#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x05 0x000
+
+#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x00 0x000
+#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x05 0x000
+
+#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x00 0x000
+#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x05 0x000
+
+#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x00 0x000
+#define MX25_PAD_OE_ACD__CSPI2_SS0		0x114 0x30c 0x4a4 0x02 0x000
+#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x05 0x000
+
+#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x00 0x000
+#define MX25_PAD_CONTRAST__GPT4_CAPIN1		0x118 0x310 0x000 0x01 0x000
+#define MX25_PAD_CONTRAST__CSPI2_SS1		0x118 0x310 0x4a8 0x02 0x000
+#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x04 0x000
+#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x05 0x001
+#define MX25_PAD_CONTRAST__USBH2_PWR		0x118 0x310 0x000 0x06 0x000
+
+#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x00 0x000
+#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x05 0x000
+#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x06 0x001
+
+#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x00 0x000
+#define MX25_PAD_CSI_D2__UART5_RXD		0x120 0x318 0x578 0x01 0x001
+#define MX25_PAD_CSI_D2__SIM1_CLK0		0x120 0x318 0x000 0x04 0x000
+#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x05 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x4b8 0x07 0x001
+
+#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x00 0x000
+#define MX25_PAD_CSI_D3__UART5_TXD		0x124 0x31c 0x000 0x01 0x000
+#define MX25_PAD_CSI_D3__SIM1_RST0		0x124 0x31c 0x000 0x04 0x000
+#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x05 0x000
+#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x07 0x001
+
+#define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x00 0x000
+#define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x01 0x001
+#define MX25_PAD_CSI_D4__SIM1_VEN0		0x128 0x320 0x000 0x04 0x000
+#define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x05 0x000
+#define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x4ac 0x07 0x001
+
+#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x00 0x000
+#define MX25_PAD_CSI_D5__UART5_CTS		0x12c 0x324 0x000 0x01 0x000
+#define MX25_PAD_CSI_D5__SIM1_TX0		0x12c 0x324 0x000 0x04 0x000
+#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x05 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x4b0 0x07 0x001
+
+#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x00 0x000
+/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
+#define MX25_PAD_CSI_D6__ESDHC2_CMD		0x130 0x328 0x4e0 0x12 0x001
+#define MX25_PAD_CSI_D6__SIM1_PD0		0x130 0x328 0x000 0x04 0x000
+#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x05 0x000
+#define MX25_PAD_CSI_D6__CSPI3_SS0		0x130 0x328 0x4bc 0x07 0x001
+
+#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x00 0x000
+#define MX25_PAD_CSI_D7__ESDHC2_CLK		0x134 0x32C 0x4dc 0x02 0x001
+#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x05 0x000
+#define MX25_PAD_CSI_D7__CSPI3_SS1		0x134 0x32c 0x4c0 0x07 0x001
+
+#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x00 0x000
+#define MX25_PAD_CSI_D8__AUD6_RXC		0x138 0x330 0x000 0x02 0x000
+#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x05 0x000
+#define MX25_PAD_CSI_D8__CSPI3_SS2		0x138 0x330 0x4c4 0x07 0x000
+
+#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x00 0x000
+#define MX25_PAD_CSI_D9__AUD6_RXFS		0x13c 0x334 0x000 0x02 0x000
+#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x05 0x000
+#define MX25_PAD_CSI_D9__CSPI3_SS3		0x13c 0x334 0x4c8 0x07 0x000
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x00 0x000
+#define MX25_PAD_CSI_MCLK__AUD6_TXD		0x140 0x338 0x000 0x01 0x000
+#define MX25_PAD_CSI_MCLK__ESDHC2_DAT0		0x140 0x338 0x4e4 0x02 0x001
+#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x00 0x000
+#define MX25_PAD_CSI_VSYNC__AUD6_RXD		0x144 0x33c 0x000 0x01 0x000
+#define MX25_PAD_CSI_VSYNC__ESDHC2_DAT1		0x144 0x33c 0x4e8 0x02 0x001
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x00 0x000
+#define MX25_PAD_CSI_HSYNC__AUD6_TXC		0x148 0x340 0x000 0x01 0x000
+#define MX25_PAD_CSI_HSYNC__ESDHC2_DAT2		0x148 0x340 0x4ec 0x02 0x001
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x00 0x000
+#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS		0x14c 0x344 0x000 0x01 0x000
+#define MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3	0x14c 0x344 0x4f0 0x02 0x001
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x05 0x000
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x00 0x000
+#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x05 0x000
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x00 0x000
+#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_MOSI__UART3_RXD		0x158 0x350 0x568 0x02 0x000
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_MISO__UART3_TXD		0x15c 0x354 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SS0__PWM2_PWMO		0x160 0x358 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1		0x164 0x35c 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SS1__I2C3_DAT		0x164 0x35C 0x528 0x01 0x001
+#define MX25_PAD_CSPI1_SS1__UART3_RTS		0x164 0x35c 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17		0x164 0x35c 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SCLK__UART3_CTS		0x168 0x360 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_RXD__UART1_RXD		0x170 0x368 0x000 0x00 0x000
+#define MX25_PAD_UART1_RXD__UART2_DTR		0x170 0x368 0x000 0x03 0x000
+#define MX25_PAD_UART1_RXD__GPIO_4_22		0x170 0x368 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_TXD__UART1_TXD		0x174 0x36c 0x000 0x00 0x000
+#define MX25_PAD_UART1_TXD__UART2_DSR		0x174 0x36c 0x000 0x03 0x000
+#define MX25_PAD_UART1_TXD__GPIO_4_23		0x174 0x36c 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_RTS__UART1_RTS		0x178 0x370 0x000 0x00 0x000
+#define MX25_PAD_UART1_RTS__CSI_D0		0x178 0x370 0x488 0x01 0x001
+#define MX25_PAD_UART1_RTS__GPT3_CAPIN1		0x178 0x370 0x000 0x02 0x000
+#define MX25_PAD_UART1_RTS__UART2_DCD		0x178 0x370 0x000 0x03 0x000
+#define MX25_PAD_UART1_RTS__GPIO_4_24		0x178 0x370 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_CTS__UART1_CTS		0x17c 0x374 0x000 0x00 0x000
+#define MX25_PAD_UART1_CTS__CSI_D1		0x17c 0x374 0x48c 0x01 0x001
+#define MX25_PAD_UART1_CTS__UART2_RI		0x17c 0x374 0x000 0x03 0x001
+#define MX25_PAD_UART1_CTS__GPIO_4_25		0x17c 0x374 0x000 0x05 0x000
+
+#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x00 0x000
+#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x05 0x000
+
+#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x00 0x000
+#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x05 0x000
+
+#define MX25_PAD_UART2_RTS__UART2_RTS		0x188 0x380 0x000 0x00 0x000
+#define MX25_PAD_UART2_RTS__FEC_COL		0x188 0x380 0x504 0x02 0x002
+#define MX25_PAD_UART2_RTS__GPT1_CAPIN1		0x188 0x380 0x000 0x03 0x000
+#define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x05 0x000
+#define MX25_PAD_UART2_RTS__CSPI2_SS3		0x188 0x380 0x000 0x06 0x000
+
+#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x00 0x000
+#define MX25_PAD_UART2_CTS__FEC_RX_ERR		0x18c 0x384 0x518 0x02 0x002
+#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x05 0x000
+#define MX25_PAD_UART2_CTS__CSPI3_SS3		0x18c 0x384 0x4c8 0x06 0x001
+
+/*
+ * Removing the SION bit from MX25_PAD_*__ESDHCn_CMD breaks detecting an SD
+ * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM
+ * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon
+ * bug that configuring the ESDHCn_CMD function doesn't enable the input path
+ * for this pin.
+ * This might have side effects for other hardware units that are connected to
+ * that pin and use the respective function as input.
+ */
+#define MX25_PAD_SD1_CMD__ESDHC1_CMD		0x190 0x388 0x000 0x10 0x000
+#define MX25_PAD_SD1_CMD__CSPI2_MOSI		0x190 0x388 0x4a0 0x01 0x001
+#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x02 0x002
+#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_CLK__ESDHC1_CLK		0x194 0x38c 0x000 0x00 0x000
+#define MX25_PAD_SD1_CLK__CSPI2_MISO		0x194 0x38c 0x49c 0x01 0x001
+#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x02 0x002
+#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x198 0x390 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA0__CSPI2_SCLK		0x198 0x390 0x494 0x01 0x001
+#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x19c 0x394 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA1__CSPI2_RDY		0x19c 0x394 0x498 0x01 0x001
+#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x03 0x000
+#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x1a0 0x398 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA2__CSPI2_SS0		0x1a0 0x398 0x4a4 0x01 0x001
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x02 0x002
+#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x1a4 0x39c 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA3__CSPI2_SS1		0x1a4 0x39c 0x4a8 0x01 0x001
+#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x02 0x002
+#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW0__UART3_RXD		0x1a8 0x3a0 0x568 0x01 0x001
+#define MX25_PAD_KPP_ROW0__UART1_DTR		0x1a8 0x3a0 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW0__GPIO_2_29		0x1a8 0x3a0 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1		0x1ac 0x3a4 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW1__UART3_TXD		0x1ac 0x3a4 0x000 0x01 0x000
+#define MX25_PAD_KPP_ROW1__UART1_DSR		0x1ac 0x3a4 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW1__GPIO_2_30		0x1ac 0x3a4 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2		0x1b0 0x3a8 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW2__UART3_RTS		0x1b0 0x3a8 0x000 0x01 0x000
+#define MX25_PAD_KPP_ROW2__CSI_D0		0x1b0 0x3a8 0x488 0x03 0x002
+#define MX25_PAD_KPP_ROW2__UART1_DCD		0x1b0 0x3a8 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW3__UART3_CTS		0x1b4 0x3ac 0x000 0x01 0x000
+#define MX25_PAD_KPP_ROW3__CSI_D1		0x1b4 0x3ac 0x48c 0x03 0x002
+#define MX25_PAD_KPP_ROW3__UART1_RI		0x1b4 0x3ac 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL0__UART4_RXD		0x1b8 0x3b0 0x570 0x01 0x001
+#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL1__UART4_TXD		0x1bc 0x3b4 0x000 0x01 0x000
+#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL2__KPP_COL2		0x1c0 0x3b8 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL2__UART4_RTS		0x1c0 0x3b8 0x56c 0x01 0x001
+#define MX25_PAD_KPP_COL2__AUD5_TXC		0x1c0 0x3b8 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL2__GPIO_3_3		0x1c0 0x3b8 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x01 0x000
+#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x00 0x000
+/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
+#define MX25_PAD_FEC_MDC__ESDHC2_CMD		0x1c8 0x3c0 0x4e0 0x11 0x002
+#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x02 0x001
+#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x00 0x000
+#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x02 0x001
+#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x00 0x000
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x00 0x000
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x02 0x001
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x00 0x000
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x05 0x000
+#define MX25_PAD_FEC_TX_EN__KPP_ROW4		0x1d8 0x3d0 0x53c 0x06 0x000
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x00 0x000
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x05 0x000
+#define MX25_PAD_FEC_RDATA0__KPP_ROW5 		0x1dc 0x3d4 0x540 0x06 0x000
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x00 0x000
+/*
+ * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
+ * 01/2011) this is CAN1_TX but that's wrong.
+ */
+#define MX25_PAD_FEC_RDATA1__CAN2_TX		0x1e0 0x3d8 0x000 0x04 0x000
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x00 0x000
+/*
+ * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
+ * 01/2011) this is CAN1_RX but that's wrong.
+ */
+#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x04 0x000
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x00 0x000
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x05 0x000
+
+#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x00 0x000
+#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x01 0x000
+#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x05 0x000
+
+#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
+
+#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x00 0x000
+#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x05 0x000
+
+#define MX25_PAD_GPIO_A__GPIO_1_0		0x1f4 0x3f0 0x000 0x00 0x000
+#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x06 0x000
+#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x02 0x000
+
+#define MX25_PAD_GPIO_B__GPIO_1_1		0x1f8 0x3f4 0x000 0x00 0x000
+#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x02 0x001
+#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x06 0x001
+
+#define MX25_PAD_GPIO_C__GPIO_1_2		0x1fc 0x3f8 0x000 0x00 0x000
+#define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x01 0x000
+#define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x02 0x001
+#define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x03 0x001
+#define MX25_PAD_GPIO_C__GPT2_CAPIN1		0x1fc 0x3f8 0x000 0x04 0x000
+#define MX25_PAD_GPIO_C__CSPI1_SS2		0x1fc 0x3f8 0x000 0x05 0x000
+#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x06 0x000
+#define MX25_PAD_GPIO_C__CSPI2_SS2		0x1fc 0x3f8 0x000 0x07 0x000
+
+#define MX25_PAD_GPIO_D__GPIO_1_3		0x200 0x3fc 0x000 0x00 0x000
+#define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x02 0x001
+#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x06 0x001
+#define MX25_PAD_GPIO_D__CSPI3_SS2		0x200 0x3fc 0x4c4 0x07 0x001
+
+#define MX25_PAD_GPIO_E__GPIO_1_4		0x204 0x400 0x000 0x00 0x000
+#define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x01 0x002
+#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
+#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x04 0x000
+#define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x06 0x002
+
+#define MX25_PAD_GPIO_F__GPIO_1_5		0x208 0x404 0x000 0x00 0x000
+#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
+#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x04 0x000
+#define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x06 0x000
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x00 0x000
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x00 0x000
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x00 0x000
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x04 0x000
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x05 0x000
+#define MX25_PAD_VSTBY_REQ__UART4_RTS		0x214 0x408 0x56c 0x06 0x002
+
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x00 0x000
+#define MX25_PAD_VSTBY_ACK__CSPI1_SS3		0x218 0x40c 0x490 0x02 0x001
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x05 0x000
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x00 0x000
+#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x04 0x001
+#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x05 0x000
+#define MX25_PAD_POWER_FAIL__UART4_CTS		0x21c 0x410 0x000 0x06 0x000
+
+#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x00 0x000
+#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x05 0x000
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0		0x224 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30		0x224 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1		0x228 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31		0x228 0x000 0x000 0x05 0x000
+
+/*
+ * Compatibility defines for out-of-tree users. You should update if you make
+ * use of one of them.
+ */
+#define MX25_PAD_D15__SDHC1_DAT7		MX25_PAD_D15__ESDHC1_DAT7
+#define MX25_PAD_D14__SDHC1_DAT6		MX25_PAD_D14__ESDHC1_DAT6
+#define MX25_PAD_D13__SDHC1_DAT5		MX25_PAD_D13__ESDHC1_DAT5
+#define MX25_PAD_D12__SDHC1_DAT4		MX25_PAD_D12__ESDHC1_DAT4
+#define MX25_PAD_LD8__SDHC2_CMD			MX25_PAD_LD8__ESDHC2_CMD
+#define MX25_PAD_LD9__SDHC2_CLK			MX25_PAD_LD9__ESDHC2_CLK
+#define MX25_PAD_LD11__SDHC2_DAT1		MX25_PAD_LD11__ESDHC2_DAT1
+#define MX25_PAD_CSI_D6__SDHC2_CMD		MX25_PAD_CSI_D6__ESDHC2_CMD
+#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK		MX25_PAD_CSI_D7__ESDHC2_CLK
+#define MX25_PAD_CSI_MCLK__SDHC2_DAT0		MX25_PAD_CSI_MCLK__ESDHC2_DAT0
+#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1		MX25_PAD_CSI_VSYNC__ESDHC2_DAT1
+#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2		MX25_PAD_CSI_HSYNC__ESDHC2_DAT2
+#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3		MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3
+#define MX25_PAD_SD1_CMD__SD1_CMD		MX25_PAD_SD1_CMD__ESDHC1_CMD
+#define MX25_PAD_SD1_CLK__SD1_CLK		MX25_PAD_SD1_CLK__ESDHC1_CLK
+#define MX25_PAD_SD1_DATA0__SD1_DATA0		MX25_PAD_SD1_DATA0__ESDHC1_DAT0
+#define MX25_PAD_SD1_DATA1__SD1_DATA1		MX25_PAD_SD1_DATA1__ESDHC1_DAT1
+#define MX25_PAD_SD1_DATA2__SD1_DATA2		MX25_PAD_SD1_DATA2__ESDHC1_DAT2
+#define MX25_PAD_SD1_DATA3__SD1_DATA3		MX25_PAD_SD1_DATA3__ESDHC1_DAT3
+
+#endif /* __DTS_IMX25_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
new file mode 100644
index 0000000000000..5f90d72b840b0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx25-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		pwm0 = &pwm1;
+		pwm1 = &pwm2;
+		pwm2 = &pwm3;
+		pwm3 = &pwm4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		spi2 = &spi3;
+		usb0 = &usbotg;
+		usb1 = &usbhost1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	asic: asic-interrupt-controller@68000000 {
+		compatible = "fsl,imx25-asic", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x68000000 0x8000000>;
+	};
+
+	clocks {
+		osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&asic>;
+		ranges;
+
+		bus@43f00000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x43f00000 0x100000>;
+			ranges;
+
+			aips1: bridge@43f00000 {
+				compatible = "fsl,imx25-aips";
+				reg = <0x43f00000 0x4000>;
+			};
+
+			i2c1: i2c@43f80000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f80000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <3>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f84000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			can1: can@43f88000 {
+				compatible = "fsl,imx25-flexcan";
+				reg = <0x43f88000 0x4000>;
+				interrupts = <43>;
+				clocks = <&clks 75>, <&clks 75>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: can@43f8c000 {
+				compatible = "fsl,imx25-flexcan";
+				reg = <0x43f8c000 0x4000>;
+				interrupts = <44>;
+				clocks = <&clks 76>, <&clks 76>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart1: serial@43f90000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x43f90000 0x4000>;
+				interrupts = <45>;
+				clocks = <&clks 120>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@43f94000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x43f94000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks 121>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@43f98000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f98000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <4>;
+				status = "disabled";
+			};
+
+			owire@43f9c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x43f9c000 0x4000>;
+				clocks = <&clks 51>;
+				clock-names = "";
+				interrupts = <2>;
+				status = "disabled";
+			};
+
+			spi1: spi@43fa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x43fa4000 0x4000>;
+				clocks = <&clks 78>, <&clks 78>;
+				clock-names = "ipg", "per";
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			kpp: kpp@43fa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
+				reg = <0x43fa8000 0x4000>;
+				clocks = <&clks 102>;
+				clock-names = "";
+				interrupts = <24>;
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@43fac000 {
+				compatible = "fsl,imx25-iomuxc";
+				reg = <0x43fac000 0x4000>;
+			};
+
+			audmux: audmux@43fb0000 {
+				compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
+				reg = <0x43fb0000 0x4000>;
+				status = "disabled";
+			};
+		};
+
+		spba-bus@50000000 {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x40000>;
+			ranges;
+
+			spi3: spi@50004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x50004000 0x4000>;
+				interrupts = <0>;
+				clocks = <&clks 80>, <&clks 80>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@50008000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x50008000 0x4000>;
+				interrupts = <5>;
+				clocks = <&clks 123>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@5000c000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x5000c000 0x4000>;
+				interrupts = <18>;
+				clocks = <&clks 122>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			spi2: spi@50010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x50010000 0x4000>;
+				clocks = <&clks 79>, <&clks 79>;
+				clock-names = "ipg", "per";
+				interrupts = <13>;
+				status = "disabled";
+			};
+
+			ssi2: ssi@50014000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+				reg = <0x50014000 0x4000>;
+				interrupts = <11>;
+				clocks = <&clks 118>;
+				clock-names = "ipg";
+				dmas = <&sdma 24 1 0>,
+				       <&sdma 25 1 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			esai@50018000 {
+				reg = <0x50018000 0x4000>;
+				interrupts = <7>;
+			};
+
+			uart5: serial@5002c000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x5002c000 0x4000>;
+				interrupts = <40>;
+				clocks = <&clks 124>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			tscadc: tscadc@50030000 {
+				compatible = "fsl,imx25-tsadc";
+				reg = <0x50030000 0xc>;
+				interrupts = <46>;
+				clocks = <&clks 119>;
+				clock-names = "ipg";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges;
+
+				adc: adc@50030800 {
+					compatible = "fsl,imx25-gcq";
+					reg = <0x50030800 0x60>;
+					interrupt-parent = <&tscadc>;
+					interrupts = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+				};
+
+				tsc: tcq@50030400 {
+					compatible = "fsl,imx25-tcq";
+					reg = <0x50030400 0x60>;
+					interrupt-parent = <&tscadc>;
+					interrupts = <0>;
+					fsl,wires = <4>;
+					status = "disabled";
+				};
+			};
+
+			ssi1: ssi@50034000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+				reg = <0x50034000 0x4000>;
+				interrupts = <12>;
+				clocks = <&clks 117>;
+				clock-names = "ipg";
+				dmas = <&sdma 28 1 0>,
+				       <&sdma 29 1 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			fec: ethernet@50038000 {
+				compatible = "fsl,imx25-fec";
+				reg = <0x50038000 0x4000>;
+				interrupts = <57>;
+				clocks = <&clks 88>, <&clks 65>;
+				clock-names = "ipg", "ahb";
+				status = "disabled";
+			};
+		};
+
+		bus@53f00000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x53f00000 0x100000>;
+			ranges;
+
+			aips2: bridge@53f00000 {
+				compatible = "fsl,imx25-aips";
+				reg = <0x53f00000 0x4000>;
+			};
+
+			clks: ccm@53f80000 {
+				compatible = "fsl,imx25-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>;
+				#clock-cells = <1>;
+			};
+
+			gpt4: timer@53f84000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f84000 0x4000>;
+				clocks = <&clks 95>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <1>;
+			};
+
+			gpt3: timer@53f88000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f88000 0x4000>;
+				clocks = <&clks 94>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <29>;
+			};
+
+			gpt2: timer@53f8c000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f8c000 0x4000>;
+				clocks = <&clks 93>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <53>;
+			};
+
+			gpt1: timer@53f90000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f90000 0x4000>;
+				clocks = <&clks 92>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <54>;
+			};
+
+			epit1: timer@53f94000 {
+				compatible = "fsl,imx25-epit";
+				reg = <0x53f94000 0x4000>;
+				clocks = <&clks 83>, <&clks 43>;
+				clock-names = "ipg", "per";
+				interrupts = <28>;
+			};
+
+			epit2: timer@53f98000 {
+				compatible = "fsl,imx25-epit";
+				reg = <0x53f98000 0x4000>;
+				clocks = <&clks 84>, <&clks 43>;
+				clock-names = "ipg", "per";
+				interrupts = <27>;
+			};
+
+			gpio4: gpio@53f9c000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53f9c000 0x4000>;
+				interrupts = <23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pwm2: pwm@53fa0000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <3>;
+				reg = <0x53fa0000 0x4000>;
+				clocks = <&clks 106>, <&clks 52>;
+				clock-names = "ipg", "per";
+				interrupts = <36>;
+			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <16>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pwm3: pwm@53fa8000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <3>;
+				reg = <0x53fa8000 0x4000>;
+				clocks = <&clks 107>, <&clks 52>;
+				clock-names = "ipg", "per";
+				interrupts = <41>;
+			};
+
+			scc: crypto@53fac000 {
+				compatible = "fsl,imx25-scc";
+				reg = <0x53fac000 0x4000>;
+				clocks = <&clks 111>;
+				clock-names = "ipg";
+				interrupts = <49>, <50>;
+				interrupt-names = "scm", "smn";
+			};
+
+			rngb: rngb@53fb0000 {
+				compatible = "fsl,imx25-rngb";
+				reg = <0x53fb0000 0x4000>;
+				clocks = <&clks 109>;
+				interrupts = <22>;
+			};
+
+			esdhc1: mmc@53fb4000 {
+				compatible = "fsl,imx25-esdhc";
+				reg = <0x53fb4000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 86>, <&clks 63>, <&clks 45>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc2: mmc@53fb8000 {
+				compatible = "fsl,imx25-esdhc";
+				reg = <0x53fb8000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 87>, <&clks 64>, <&clks 46>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			lcdc: lcdc@53fbc000 {
+				compatible = "fsl,imx25-fb", "fsl,imx21-fb";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			slcdc@53fc0000 {
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <38>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@53fc8000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <3>;
+				reg = <0x53fc8000 0x4000>;
+				clocks = <&clks 108>, <&clks 52>;
+				clock-names = "ipg", "per";
+				interrupts = <42>;
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma: dma-controller@53fd4000 {
+				compatible = "fsl,imx25-sdma";
+				reg = <0x53fd4000 0x4000>;
+				clocks = <&clks 112>, <&clks 68>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				interrupts = <34>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
+			};
+
+			watchdog@53fdc000 {
+				compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 126>;
+				clock-names = "";
+				interrupts = <55>;
+			};
+
+			pwm1: pwm@53fe0000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <3>;
+				reg = <0x53fe0000 0x4000>;
+				clocks = <&clks 105>, <&clks 52>;
+				clock-names = "ipg", "per";
+				interrupts = <26>;
+			};
+
+			iim: efuse@53ff0000 {
+				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <19>;
+				clocks = <&clks 99>;
+			};
+
+			usbotg: usb@53ff4000 {
+				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+				reg = <0x53ff4000 0x0200>;
+				interrupts = <37>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				phy_type = "utmi";
+				dr_mode = "otg";
+				status = "disabled";
+			};
+
+			usbhost1: usb@53ff4400 {
+				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+				reg = <0x53ff4400 0x0200>;
+				interrupts = <35>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
+				maximum-speed = "full-speed";
+				phy_type = "serial";
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53ff4600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx25-usbmisc";
+				reg = <0x53ff4600 0x00f>;
+			};
+
+			dryice@53ffc000 {
+				compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
+				reg = <0x53ffc000 0x4000>;
+				clocks = <&clks 81>;
+				clock-names = "ipg";
+				interrupts = <25 56>;
+			};
+		};
+
+		iram: sram@78000000 {
+			compatible = "mmio-sram";
+			reg = <0x78000000 0x20000>;
+		};
+
+		emi@80000000 {
+			compatible = "fsl,emi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x3b002000>;
+			ranges;
+
+			nfc: nand@bb000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				compatible = "fsl,imx25-nand";
+				reg = <0xbb000000 0x2000>;
+				clocks = <&clks 50>;
+				clock-names = "";
+				interrupts = <33>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usb-phy@0 {
+			reg = <0>;
+			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
+		};
+
+		usbphy1: usb-phy@1 {
+			reg = <1>;
+			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts
new file mode 100644
index 0000000000000..745d5d4099525
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
+ * Copyright 2012 Armadeus Systems <support@armadeus.com>
+ *
+ * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Armadeus Systems APF27 module";
+	compatible = "armadeus,imx27-apf27", "fsl,imx27";
+
+	memory@a0000000 {
+		device_type = "memory";
+		reg = <0xa0000000 0x04000000>;
+	};
+};
+
+&clk_osc26m {
+	clock-frequency = <0>;
+};
+
+&iomuxc {
+	imx27-apf27 {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&nfc {
+	status = "okay";
+	nand-bus-width = <16>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "env";
+		reg = <0x100000 0x80000>;
+	};
+
+	partition@180000 {
+		label = "env2";
+		reg = <0x180000 0x80000>;
+	};
+
+	partition@200000 {
+		label = "firmware";
+		reg = <0x200000 0x80000>;
+	};
+
+	partition@280000 {
+		label = "dtb";
+		reg = <0x280000 0x80000>;
+	};
+
+	partition@300000 {
+		label = "kernel";
+		reg = <0x300000 0x500000>;
+	};
+
+	partition@800000 {
+		label = "rootfs";
+		reg = <0x800000 0xf800000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
new file mode 100644
index 0000000000000..6f1e8ce9e76e9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Armadeus Systems - <support@armadeus.com>
+ */
+
+/* APF27Dev is a docking board for the APF27 SOM */
+#include "imx27-apf27.dts"
+
+/ {
+	model = "Armadeus Systems APF27Dev docking/development board";
+	compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27";
+
+	display: display {
+		model = "Chimei-LW700AT9003";
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xfae80083>;	/* non-standard but required */
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 800x480 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user-key {
+			label = "user";
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <276>; /* BTN_EXTRA */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_max5821: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "max5821-reg";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&cspi1 {
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
+	status = "okay";
+
+	adc@0 {
+		compatible = "maxim,max1027";
+		reg = <0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_max1027>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&cspi2 {
+	cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>,
+		   <&gpio2 17 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi2 &pinctrl_cspi2_cs>;
+	status = "okay";
+};
+
+&fb {
+	display = <&display>;
+	fsl,dmacr = <0x00020010>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb1>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
+
+	max5821@38 {
+		compatible = "maxim,max5821";
+		reg = <0x38>;
+		vref-supply = <&reg_max5821>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-apf27dev {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+			>;
+		};
+
+		pinctrl_cspi1_cs: cspi1csgrp {
+			fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
+		};
+
+		pinctrl_cspi2: cspi2grp {
+			fsl,pins = <
+				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+			>;
+		};
+
+		pinctrl_cspi2_cs: cspi2csgrp {
+			fsl,pins = <
+				MX27_PAD_CSI_D5__GPIO2_17 0x0
+				MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
+				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
+		};
+
+		pinctrl_imxfb1: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_CLS__CLS 0x0
+				MX27_PAD_CONTRAST__CONTRAST 0x0
+				MX27_PAD_LD0__LD0 0x0
+				MX27_PAD_LD1__LD1 0x0
+				MX27_PAD_LD2__LD2 0x0
+				MX27_PAD_LD3__LD3 0x0
+				MX27_PAD_LD4__LD4 0x0
+				MX27_PAD_LD5__LD5 0x0
+				MX27_PAD_LD6__LD6 0x0
+				MX27_PAD_LD7__LD7 0x0
+				MX27_PAD_LD8__LD8 0x0
+				MX27_PAD_LD9__LD9 0x0
+				MX27_PAD_LD10__LD10 0x0
+				MX27_PAD_LD11__LD11 0x0
+				MX27_PAD_LD12__LD12 0x0
+				MX27_PAD_LD13__LD13 0x0
+				MX27_PAD_LD14__LD14 0x0
+				MX27_PAD_LD15__LD15 0x0
+				MX27_PAD_LD16__LD16 0x0
+				MX27_PAD_LD17__LD17 0x0
+				MX27_PAD_LSCLK__LSCLK 0x0
+				MX27_PAD_OE_ACD__OE_ACD 0x0
+				MX27_PAD_PS__PS 0x0
+				MX27_PAD_REV__REV 0x0
+				MX27_PAD_SPL_SPR__SPL_SPR 0x0
+				MX27_PAD_HSYNC__HSYNC 0x0
+				MX27_PAD_VSYNC__VSYNC 0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_max1027: max1027 {
+			 fsl,pins = <
+				 MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */
+				 MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */
+			>;
+		};
+
+		pinctrl_pwm: pwmgrp {
+			fsl,pins = <
+				MX27_PAD_PWMO__PWMO 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+			>;
+		};
+
+		pinctrl_sdhc2_cd: sdhc2cdgrp {
+			fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
+		};
+	};
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2 &pinctrl_sdhc2_cd>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
new file mode 100644
index 0000000000000..74110bbcd9d4f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX27";
+	compatible = "eukrea,cpuimx27", "fsl,imx27";
+
+	memory@a0000000 {
+		device_type = "memory";
+		reg = <0xa0000000 0x04000000>;
+	};
+
+	clk14745600: clk-uart {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <14745600>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire>;
+	status = "okay";
+};
+
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x04000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
+	};
+
+	uart8250@3,200000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_1>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x200000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,400000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_2>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x400000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,800000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_3>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x800000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,1000000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_4>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x1000000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0		0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1		0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2		0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3		0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER		0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1		0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2		0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3		0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO		0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC		0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS		0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK		0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0		0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV		0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK		0x0
+				MX27_PAD_ATA_DATA13__FEC_COL		0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER		0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN		0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA		0x0
+				MX27_PAD_I2C_CLK__I2C_CLK		0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB			0x0
+				MX27_PAD_NFCLE__NFCLE			0x0
+				MX27_PAD_NFWP_B__NFWP_B			0x0
+				MX27_PAD_NFCE_B__NFCE_B			0x0
+				MX27_PAD_NFALE__NFALE			0x0
+				MX27_PAD_NFRE_B__NFRE_B			0x0
+				MX27_PAD_NFWE_B__NFWE_B			0x0
+			>;
+		};
+
+		pinctrl_owire: owiregrp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE			0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK		0x0
+				MX27_PAD_SD2_CMD__SD2_CMD		0x0
+				MX27_PAD_SD2_D0__SD2_D0			0x0
+				MX27_PAD_SD2_D1__SD2_D1			0x0
+				MX27_PAD_SD2_D2__SD2_D2			0x0
+				MX27_PAD_SD2_D3__SD2_D3			0x0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_TXDM__UART4_TXD		0x0
+				MX27_PAD_USBH1_RXDP__UART4_RXD		0x0
+				MX27_PAD_USBH1_TXDP__UART4_CTS		0x0
+				MX27_PAD_USBH1_FS__UART4_RTS		0x0
+			>;
+		};
+
+		pinctrl_uart8250_1: uart82501grp {
+			fsl,pins = <
+				MX27_PAD_USB_PWR__GPIO2_23		0x0
+			>;
+		};
+
+		pinctrl_uart8250_2: uart82502grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0
+			>;
+		};
+
+		pinctrl_uart8250_3: uart82503grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_OE_B__GPIO2_27		0x0
+			>;
+		};
+
+		pinctrl_uart8250_4: uart82504grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_RXDM__GPIO2_30		0x0
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
+				MX27_PAD_USBH2_STP__USBH2_STP		0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
new file mode 100644
index 0000000000000..9c3ec82ec7e5a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include "imx27-eukrea-cpuimx27.dtsi"
+
+/ {
+	model = "Eukrea MBIMXSD27";
+	compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
+
+	display0: CMO-QVGA {
+		model = "CMO-QVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfad08b80>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <20>;
+				hsync-len = <30>;
+				hfront-porch = <38>;
+				vback-porch = <4>;
+				vsync-len = <3>;
+				vfront-porch = <15>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds>;
+
+		led1 {
+			label = "system::live";
+			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "system::user";
+			gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		reg_lcd: regulator@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcdreg>;
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "LCD";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	ads7846@0 {
+		compatible = "ti,ads7846";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		reg = <0>;
+		interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+		spi-cpol;
+		spi-max-frequency = <1500000>;
+		ti,keep-vref-on;
+	};
+};
+
+&fb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb>;
+	display = <&display0>;
+	lcd-supply = <&reg_lcd>;
+	fsl,dmacr = <0x00040060>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,lpccr = <0x00a903ff>;
+	status = "okay";
+};
+
+&i2c1 {
+	codec: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&kpp {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+	>;
+	status = "okay";
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	codec-handle = <&codec>;
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27-baseboard {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO	0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI	0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK	0x0
+				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* CS0 */
+			>;
+		};
+
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX27_PAD_PWMO__GPIO5_5		0x0
+			>;
+		};
+
+		pinctrl_gpioleds: gpioledsgrp {
+			fsl,pins = <
+				MX27_PAD_PC_PWRON__GPIO6_16	0x0
+				MX27_PAD_PC_CD2_B__GPIO6_19	0x0
+			>;
+		};
+
+		pinctrl_imxfb: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_LD0__LD0		0x0
+				MX27_PAD_LD1__LD1		0x0
+				MX27_PAD_LD2__LD2		0x0
+				MX27_PAD_LD3__LD3		0x0
+				MX27_PAD_LD4__LD4		0x0
+				MX27_PAD_LD5__LD5		0x0
+				MX27_PAD_LD6__LD6		0x0
+				MX27_PAD_LD7__LD7		0x0
+				MX27_PAD_LD8__LD8		0x0
+				MX27_PAD_LD9__LD9		0x0
+				MX27_PAD_LD10__LD10		0x0
+				MX27_PAD_LD11__LD11		0x0
+				MX27_PAD_LD12__LD12		0x0
+				MX27_PAD_LD13__LD13		0x0
+				MX27_PAD_LD14__LD14		0x0
+				MX27_PAD_LD15__LD15		0x0
+				MX27_PAD_LD16__LD16		0x0
+				MX27_PAD_LD17__LD17		0x0
+				MX27_PAD_CONTRAST__CONTRAST	0x0
+				MX27_PAD_OE_ACD__OE_ACD		0x0
+				MX27_PAD_HSYNC__HSYNC		0x0
+				MX27_PAD_VSYNC__VSYNC		0x0
+			>;
+		};
+
+		pinctrl_lcdreg: lcdreggrp {
+			fsl,pins = <
+				MX27_PAD_CLS__GPIO1_25		0x0
+			>;
+		};
+
+		pinctrl_sdhc1: sdhc1grp {
+			fsl,pins = <
+				MX27_PAD_SD1_CLK__SD1_CLK	0x0
+				MX27_PAD_SD1_CMD__SD1_CMD	0x0
+				MX27_PAD_SD1_D0__SD1_D0		0x0
+				MX27_PAD_SD1_D1__SD1_D1		0x0
+				MX27_PAD_SD1_D2__SD1_D2		0x0
+				MX27_PAD_SD1_D3__SD1_D3		0x0
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX27_PAD_SSI4_CLK__SSI4_CLK	0x0
+				MX27_PAD_SSI4_FS__SSI4_FS	0x0
+				MX27_PAD_SSI4_RXDAT__SSI4_RXDAT	0x1
+				MX27_PAD_SSI4_TXDAT__SSI4_TXDAT	0x1
+			>;
+		};
+
+		pinctrl_touch: touchgrp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_RDY__GPIO4_25	0x0 /* IRQ */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD	0x0
+				MX27_PAD_UART1_RXD__UART1_RXD	0x0
+				MX27_PAD_UART1_CTS__UART1_CTS	0x0
+				MX27_PAD_UART1_RTS__UART1_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD	0x0
+				MX27_PAD_UART2_RXD__UART2_RXD	0x0
+				MX27_PAD_UART2_CTS__UART2_CTS	0x0
+				MX27_PAD_UART2_RTS__UART2_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD	0x0
+				MX27_PAD_UART3_RXD__UART3_RXD	0x0
+				MX27_PAD_UART3_CTS__UART3_CTS	0x0
+				MX27_PAD_UART3_RTS__UART3_RTS	0x0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
new file mode 100644
index 0000000000000..35123b7cb6b3e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Sascha Hauer, Pengutronix
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Freescale i.MX27 Product Development Kit";
+	compatible = "fsl,imx27-pdk", "fsl,imx27";
+
+	memory@a0000000 {
+		device_type = "memory";
+		reg = <0xa0000000 0x08000000>;
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usbphy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			clocks = <&clks IMX27_CLK_DUMMY>;
+			clock-names = "main_clk";
+			#phy-cells = <0>;
+		};
+	};
+};
+
+&cspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi2>;
+	cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13783@0 {
+		compatible = "fsl,mc13783";
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+
+		regulators {
+			vgen_reg: vgen {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc1_reg: vmmc1 {
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			gpo1_reg: gpo1 {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			gpo3_reg: gpo3 {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-mode = "mii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&kpp {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_ENTER)
+		MATRIX_KEY(2, 0, KEY_F6)
+		MATRIX_KEY(2, 1, KEY_F8)
+		MATRIX_KEY(2, 2, KEY_F9)
+		MATRIX_KEY(2, 3, KEY_F10)
+	>;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	fsl,usbphy = <&usbphy0>;
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-pdk {
+		pinctrl_cspi2: cspi2grp {
+			fsl,pins = <
+				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+				MX27_PAD_CSPI2_SS0__GPIO4_21	0x0 /* SPI2 CS0 */
+				MX27_PAD_TOUT__GPIO3_14		0x0 /* PMIC IRQ */
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB	0x0
+				MX27_PAD_NFCLE__NFCLE	0x0
+				MX27_PAD_NFWP_B__NFWP_B	0x0
+				MX27_PAD_NFCE_B__NFCE_B	0x0
+				MX27_PAD_NFALE__NFALE	0x0
+				MX27_PAD_NFRE_B__NFRE_B	0x0
+				MX27_PAD_NFWE_B__NFWE_B	0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
new file mode 100644
index 0000000000000..188639738dc3e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Markus Pargmann, Pengutronix
+ */
+
+#include "imx27-phytec-phycard-s-som.dtsi"
+
+/ {
+	model = "Phytec pca100 rapid development kit";
+	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	display: display {
+		model = "Primeview-PD050VL1";
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 640x480 {
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <112>;
+				hfront-porch = <36>;
+				hsync-len = <32>;
+				vback-porch = <33>;
+				vfront-porch = <33>;
+				vsync-len = <2>;
+				clock-frequency = <25000000>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&fb {
+	display = <&display>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		vcc-supply = <&reg_3v3>;
+		reg = <0x64>;
+	};
+};
+
+&iomuxc {
+	imx27-phycard-s-rdk {
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
+			>;
+		};
+
+		pinctrl_owire1: owire1grp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+				MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD 0x0
+				MX27_PAD_UART2_RXD__UART2_RXD 0x0
+				MX27_PAD_UART2_CTS__UART2_CTS 0x0
+				MX27_PAD_UART2_RTS__UART2_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD 0x0
+				MX27_PAD_UART3_RXD__UART3_RXD 0x0
+				MX27_PAD_UART3_CTS__UART3_CTS 0x0
+				MX27_PAD_UART3_RTS__UART3_RTS 0x0
+			>;
+		};
+	};
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire1>;
+	status = "okay";
+};
+
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi
new file mode 100644
index 0000000000000..303f920201c50
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pca100";
+	compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+	memory@a0000000 {
+		device_type = "memory";
+		reg = <0xa0000000 0x08000000>; /* 128MB */
+	};
+};
+
+&cspi1 {
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+&iomuxc {
+	imx27-phycard-s-som {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB 0x0
+				MX27_PAD_NFCLE__NFCLE 0x0
+				MX27_PAD_NFWP_B__NFWP_B 0x0
+				MX27_PAD_NFCE_B__NFCE_B 0x0
+				MX27_PAD_NFALE__NFALE 0x0
+				MX27_PAD_NFRE_B__NFRE_B 0x0
+				MX27_PAD_NFWE_B__NFWE_B 0x0
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
new file mode 100644
index 0000000000000..344e777901524
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ */
+
+#include "imx27-phytec-phycore-som.dtsi"
+
+/ {
+	model = "Phytec pcm970";
+	compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	display0: LQ035Q7 {
+		model = "Sharp-LQ035Q7";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xf00080c0>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 240x320 {
+				clock-frequency = <5500000>;
+				hactive = <240>;
+				vactive = <320>;
+				hback-porch = <5>;
+				hsync-len = <7>;
+				hfront-porch = <16>;
+				vback-porch = <7>;
+				vsync-len = <1>;
+				vfront-porch = <9>;
+				pixelclk-active = <1>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <0>;
+			};
+		};
+	};
+
+	regulators {
+		regulator@2 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_csien>;
+			reg = <2>;
+			regulator-name = "CSI_EN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			regulator-always-on;
+		};
+	};
+
+	usbphy {
+		usbphy2: usbphy@2 {
+			compatible = "usb-nop-xceiv";
+			reg = <2>;
+			vcc-supply = <&reg_5v0>;
+			clocks = <&clks IMX27_CLK_DUMMY>;
+			clock-names = "main_clk";
+			#phy-cells = <0>;
+		};
+	};
+};
+
+&cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>;
+};
+
+&fb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb1>;
+	display = <&display0>;
+	lcd-supply = <&reg_5v0>;
+	fsl,dmacr = <0x00020010>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,lpccr = <0x00a903ff>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	camgpio: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	imx27_phycore_rdk {
+		pinctrl_csien: csiengrp {
+			fsl,pins = <
+				MX27_PAD_USB_OC_B__GPIO2_24 0x0
+			>;
+		};
+
+		pinctrl_cspi1cs1: cspi1cs1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+			>;
+		};
+
+		pinctrl_imxfb1: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_LD0__LD0 0x0
+				MX27_PAD_LD1__LD1 0x0
+				MX27_PAD_LD2__LD2 0x0
+				MX27_PAD_LD3__LD3 0x0
+				MX27_PAD_LD4__LD4 0x0
+				MX27_PAD_LD5__LD5 0x0
+				MX27_PAD_LD6__LD6 0x0
+				MX27_PAD_LD7__LD7 0x0
+				MX27_PAD_LD8__LD8 0x0
+				MX27_PAD_LD9__LD9 0x0
+				MX27_PAD_LD10__LD10 0x0
+				MX27_PAD_LD11__LD11 0x0
+				MX27_PAD_LD12__LD12 0x0
+				MX27_PAD_LD13__LD13 0x0
+				MX27_PAD_LD14__LD14 0x0
+				MX27_PAD_LD15__LD15 0x0
+				MX27_PAD_LD16__LD16 0x0
+				MX27_PAD_LD17__LD17 0x0
+				MX27_PAD_CLS__CLS 0x0
+				MX27_PAD_CONTRAST__CONTRAST 0x0
+				MX27_PAD_LSCLK__LSCLK 0x0
+				MX27_PAD_OE_ACD__OE_ACD 0x0
+				MX27_PAD_PS__PS 0x0
+				MX27_PAD_REV__REV 0x0
+				MX27_PAD_SPL_SPR__SPL_SPR 0x0
+				MX27_PAD_HSYNC__HSYNC 0x0
+				MX27_PAD_VSYNC__VSYNC 0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			/* Add pullup to DATA line */
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA	0x1
+				MX27_PAD_I2C_CLK__I2C_CLK	0x0
+			>;
+		};
+
+		pinctrl_owire1: owire1grp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+				MX27_PAD_SSI3_FS__GPIO3_28	0x0 /* WP */
+				MX27_PAD_SSI3_RXDAT__GPIO3_29	0x0 /* CD */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD 0x0
+				MX27_PAD_UART2_RXD__UART2_RXD 0x0
+				MX27_PAD_UART2_CTS__UART2_CTS 0x0
+				MX27_PAD_UART2_RTS__UART2_RTS 0x0
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
+				MX27_PAD_USBH2_STP__USBH2_STP 0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX27_PAD_CS4_B__CS4_B		0x0 /* CS4 */
+				MX27_PAD_SD1_D1__GPIO5_19	0x0 /* CAN IRQ */
+			>;
+		};
+	};
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire1>;
+	status = "okay";
+};
+
+&pmicleds {
+	ledr1: led@3 {
+		reg = <3>;
+		label = "system:red1:user";
+	};
+
+	ledg1: led@4 {
+		reg = <4>;
+		label = "system:green1:user";
+	};
+
+	ledb1: led@5 {
+		reg = <5>;
+		label = "system:blue1:user";
+	};
+
+	ledr2: led@6 {
+		reg = <6>;
+		label = "system:red2:user";
+	};
+
+	ledg2: led@7 {
+		reg = <7>;
+		label = "system:green2:user";
+	};
+
+	ledb2: led@8 {
+		reg = <8>;
+		label = "system:blue2:user";
+	};
+
+	ledr3: led@9 {
+		reg = <9>;
+		label = "system:red3:nand";
+		linux,default-trigger = "nand-disk";
+	};
+
+	ledg3: led@10 {
+		reg = <10>;
+		label = "system:green3:live";
+		linux,default-trigger = "heartbeat";
+	};
+
+	ledb3: led@11 {
+		reg = <11>;
+		label = "system:blue3:cpu";
+		linux,default-trigger = "cpu0";
+	};
+};
+
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vmmc1_reg>;
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	vbus-supply = <&reg_5v0>;
+	fsl,usbphy = <&usbphy2>;
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+
+	can@4,0 {
+		compatible = "nxp,sja1000";
+		reg = <4 0x00000000 0x00000100>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		nxp,external-clock-frequency = <16000000>;
+		nxp,tx-output-config = <0x16>;
+		nxp,no-comparator-bypass;
+		fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
new file mode 100644
index 0000000000000..3d10273177e9b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pcm038";
+	compatible = "phytec,imx27-pcm038", "fsl,imx27";
+
+	memory@a0000000 {
+		device_type = "memory";
+		reg = <0xa0000000 0x08000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		reg_5v0: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "5V0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usbphy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			vcc-supply = <&sw3_reg>;
+			clocks = <&clks IMX27_CLK_DUMMY>;
+			clock-names = "main_clk";
+			#phy-cells = <0>;
+		};
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	/* SSI0 <=> PINS_4 (MC13783 Audio) */
+	ssi0 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <0xcb205000>;
+	};
+
+	pins4 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <0x00001000>;
+	};
+};
+
+&cspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13783@0 {
+		compatible = "fsl,mc13783";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		pmicleds: leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x001 0x000 0x000 0x000 0x000 0x000>;
+		};
+
+		regulators {
+			/* SW1A and SW1B joined operation */
+			sw1_reg: sw1a {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1520000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* SW2A and SW2B joined operation */
+			sw2_reg: sw2a {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			violo_reg: violo {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			viohi_reg: viohi {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen_reg: vgen {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vrf1_reg: vrf1 {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vrf2_reg: vrf2 {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc1_reg: vmmc1 {
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			gpo1_reg: gpo1 { };
+
+			pwgt1spi_reg: pwgt1spi {
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	lm75@4a {
+		compatible = "national,lm75";
+		reg = <0x4a>;
+	};
+};
+
+&iomuxc {
+	imx27_phycore_som {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* SPI1 CS0 */
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+				MX27_PAD_SSI3_TXDAT__GPIO3_30	0x0 /* FEC RST */
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB 0x0
+				MX27_PAD_NFCLE__NFCLE 0x0
+				MX27_PAD_NFWP_B__NFWP_B 0x0
+				MX27_PAD_NFCE_B__NFCE_B 0x0
+				MX27_PAD_NFALE__NFALE 0x0
+				MX27_PAD_NFRE_B__NFRE_B 0x0
+				MX27_PAD_NFWE_B__NFWE_B 0x0
+			>;
+		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX27_PAD_USB_PWR__GPIO2_23	0x0 /* PMIC IRQ */
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX27_PAD_SSI1_FS__SSI1_FS 0x0
+				MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
+				MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
+				MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	phy_type = "ulpi";
+	fsl,usbphy = <&usbphy0>;
+	vbus-supply = <&sw3_reg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	sram: sram@1,0 {
+		compatible = "mtd-ram";
+		reg = <1 0x00000000 0x00800000>;
+		bank-width = <2>;
+		linux,mtd-name = "mtd-ram.0";
+		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx27-pinfunc.h
new file mode 100644
index 0000000000000..75aea0c701d4c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx27-pinfunc.h
@@ -0,0 +1,474 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
+ */
+
+#ifndef __DTS_IMX27_PINFUNC_H
+#define __DTS_IMX27_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <pin mux_id>
+ * mux_id consists of
+ * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ *
+ * function:      0 - Primary function
+ *                1 - Alternate function
+ *                2 - GPIO
+ * direction:     0 - Input
+ *                1 - Output
+ * gpio_oconf:    0 - A_IN
+ *                1 - B_IN
+ *                2 - C_IN
+ *                3 - Data Register
+ * gpio_iconfa/b: 0 - GPIO_IN
+ *                1 - Interrupt Status Register
+ *                2 - 0
+ *                3 - 1
+ *
+ * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is
+ * the pin number on the specific port (between 0 and 31).
+ */
+
+#define MX27_PAD_USBH2_CLK__USBH2_CLK                      0x00 0x000
+#define MX27_PAD_USBH2_CLK__GPIO1_0                        0x00 0x032
+#define MX27_PAD_USBH2_DIR__USBH2_DIR                      0x01 0x000
+#define MX27_PAD_USBH2_DIR__GPIO1_1                        0x01 0x032
+#define MX27_PAD_USBH2_DATA7__USBH2_DATA7                  0x02 0x004
+#define MX27_PAD_USBH2_DATA7__GPIO1_2                      0x02 0x032
+#define MX27_PAD_USBH2_NXT__USBH2_NXT                      0x03 0x000
+#define MX27_PAD_USBH2_NXT__GPIO1_3                        0x03 0x032
+#define MX27_PAD_USBH2_STP__USBH2_STP                      0x04 0x004
+#define MX27_PAD_USBH2_STP__GPIO1_4                        0x04 0x032
+#define MX27_PAD_LSCLK__LSCLK                              0x05 0x004
+#define MX27_PAD_LSCLK__GPIO1_5                            0x05 0x032
+#define MX27_PAD_LD0__LD0                                  0x06 0x004
+#define MX27_PAD_LD0__GPIO1_6                              0x06 0x032
+#define MX27_PAD_LD1__LD1                                  0x07 0x004
+#define MX27_PAD_LD1__GPIO1_7                              0x07 0x032
+#define MX27_PAD_LD2__LD2                                  0x08 0x004
+#define MX27_PAD_LD2__GPIO1_8                              0x08 0x032
+#define MX27_PAD_LD3__LD3                                  0x09 0x004
+#define MX27_PAD_LD3__GPIO1_9                              0x09 0x032
+#define MX27_PAD_LD4__LD4                                  0x0a 0x004
+#define MX27_PAD_LD4__GPIO1_10                             0x0a 0x032
+#define MX27_PAD_LD5__LD5                                  0x0b 0x004
+#define MX27_PAD_LD5__GPIO1_11                             0x0b 0x032
+#define MX27_PAD_LD6__LD6                                  0x0c 0x004
+#define MX27_PAD_LD6__GPIO1_12                             0x0c 0x032
+#define MX27_PAD_LD7__LD7                                  0x0d 0x004
+#define MX27_PAD_LD7__GPIO1_13                             0x0d 0x032
+#define MX27_PAD_LD8__LD8                                  0x0e 0x004
+#define MX27_PAD_LD8__GPIO1_14                             0x0e 0x032
+#define MX27_PAD_LD9__LD9                                  0x0f 0x004
+#define MX27_PAD_LD9__GPIO1_15                             0x0f 0x032
+#define MX27_PAD_LD10__LD10                                0x10 0x004
+#define MX27_PAD_LD10__GPIO1_16                            0x10 0x032
+#define MX27_PAD_LD11__LD11                                0x11 0x004
+#define MX27_PAD_LD11__GPIO1_17                            0x11 0x032
+#define MX27_PAD_LD12__LD12                                0x12 0x004
+#define MX27_PAD_LD12__GPIO1_18                            0x12 0x032
+#define MX27_PAD_LD13__LD13                                0x13 0x004
+#define MX27_PAD_LD13__GPIO1_19                            0x13 0x032
+#define MX27_PAD_LD14__LD14                                0x14 0x004
+#define MX27_PAD_LD14__GPIO1_20                            0x14 0x032
+#define MX27_PAD_LD15__LD15                                0x15 0x004
+#define MX27_PAD_LD15__GPIO1_21                            0x15 0x032
+#define MX27_PAD_LD16__LD16                                0x16 0x004
+#define MX27_PAD_LD16__GPIO1_22                            0x16 0x032
+#define MX27_PAD_LD17__LD17                                0x17 0x004
+#define MX27_PAD_LD17__GPIO1_23                            0x17 0x032
+#define MX27_PAD_REV__REV                                  0x18 0x004
+#define MX27_PAD_REV__GPIO1_24                             0x18 0x032
+#define MX27_PAD_CLS__CLS                                  0x19 0x004
+#define MX27_PAD_CLS__GPIO1_25                             0x19 0x032
+#define MX27_PAD_PS__PS                                    0x1a 0x004
+#define MX27_PAD_PS__GPIO1_26                              0x1a 0x032
+#define MX27_PAD_SPL_SPR__SPL_SPR                          0x1b 0x004
+#define MX27_PAD_SPL_SPR__GPIO1_27                         0x1b 0x032
+#define MX27_PAD_HSYNC__HSYNC                              0x1c 0x004
+#define MX27_PAD_HSYNC__GPIO1_28                           0x1c 0x032
+#define MX27_PAD_VSYNC__VSYNC                              0x1d 0x004
+#define MX27_PAD_VSYNC__GPIO1_29                           0x1d 0x032
+#define MX27_PAD_CONTRAST__CONTRAST                        0x1e 0x004
+#define MX27_PAD_CONTRAST__GPIO1_30                        0x1e 0x032
+#define MX27_PAD_OE_ACD__OE_ACD                            0x1f 0x004
+#define MX27_PAD_OE_ACD__GPIO1_31                          0x1f 0x032
+#define MX27_PAD_SD2_D0__SD2_D0                            0x24 0x004
+#define MX27_PAD_SD2_D0__MSHC_DATA0                        0x24 0x005
+#define MX27_PAD_SD2_D0__GPIO2_4                           0x24 0x032
+#define MX27_PAD_SD2_D1__SD2_D1                            0x25 0x004
+#define MX27_PAD_SD2_D1__MSHC_DATA1                        0x25 0x005
+#define MX27_PAD_SD2_D1__GPIO2_5                           0x25 0x032
+#define MX27_PAD_SD2_D2__SD2_D2                            0x26 0x004
+#define MX27_PAD_SD2_D2__MSHC_DATA2                        0x26 0x005
+#define MX27_PAD_SD2_D2__GPIO2_6                           0x26 0x032
+#define MX27_PAD_SD2_D3__SD2_D3                            0x27 0x004
+#define MX27_PAD_SD2_D3__MSHC_DATA3                        0x27 0x005
+#define MX27_PAD_SD2_D3__GPIO2_7                           0x27 0x032
+#define MX27_PAD_SD2_CMD__SD2_CMD                          0x28 0x004
+#define MX27_PAD_SD2_CMD__MSHC_BS                          0x28 0x005
+#define MX27_PAD_SD2_CMD__GPIO2_8                          0x28 0x032
+#define MX27_PAD_SD2_CLK__SD2_CLK                          0x29 0x004
+#define MX27_PAD_SD2_CLK__MSHC_SCLK                        0x29 0x005
+#define MX27_PAD_SD2_CLK__GPIO2_9                          0x29 0x032
+#define MX27_PAD_CSI_D0__CSI_D0                            0x2a 0x000
+#define MX27_PAD_CSI_D0__UART6_TXD                         0x2a 0x005
+#define MX27_PAD_CSI_D0__GPIO2_10                          0x2a 0x032
+#define MX27_PAD_CSI_D1__CSI_D1                            0x2b 0x000
+#define MX27_PAD_CSI_D1__UART6_RXD                         0x2b 0x001
+#define MX27_PAD_CSI_D1__GPIO2_11                          0x2b 0x032
+#define MX27_PAD_CSI_D2__CSI_D2                            0x2c 0x000
+#define MX27_PAD_CSI_D2__UART6_CTS                         0x2c 0x005
+#define MX27_PAD_CSI_D2__GPIO2_12                          0x2c 0x032
+#define MX27_PAD_CSI_D3__CSI_D3                            0x2d 0x000
+#define MX27_PAD_CSI_D3__UART6_RTS                         0x2d 0x001
+#define MX27_PAD_CSI_D3__GPIO2_13                          0x2d 0x032
+#define MX27_PAD_CSI_D4__CSI_D4                            0x2e 0x000
+#define MX27_PAD_CSI_D4__GPIO2_14                          0x2e 0x032
+#define MX27_PAD_CSI_MCLK__CSI_MCLK                        0x2f 0x004
+#define MX27_PAD_CSI_MCLK__GPIO2_15                        0x2f 0x032
+#define MX27_PAD_CSI_PIXCLK__CSI_PIXCLK                    0x30 0x000
+#define MX27_PAD_CSI_PIXCLK__GPIO2_16                      0x30 0x032
+#define MX27_PAD_CSI_D5__CSI_D5                            0x31 0x000
+#define MX27_PAD_CSI_D5__GPIO2_17                          0x31 0x032
+#define MX27_PAD_CSI_D6__CSI_D6                            0x32 0x000
+#define MX27_PAD_CSI_D6__UART5_TXD                         0x32 0x005
+#define MX27_PAD_CSI_D6__GPIO2_18                          0x32 0x032
+#define MX27_PAD_CSI_D7__CSI_D7                            0x33 0x000
+#define MX27_PAD_CSI_D7__UART5_RXD                         0x33 0x001
+#define MX27_PAD_CSI_D7__GPIO2_19                          0x33 0x032
+#define MX27_PAD_CSI_VSYNC__CSI_VSYNC                      0x34 0x000
+#define MX27_PAD_CSI_VSYNC__UART5_CTS                      0x34 0x005
+#define MX27_PAD_CSI_VSYNC__GPIO2_20                       0x34 0x032
+#define MX27_PAD_CSI_HSYNC__CSI_HSYNC                      0x35 0x000
+#define MX27_PAD_CSI_HSYNC__UART5_RTS                      0x35 0x001
+#define MX27_PAD_CSI_HSYNC__GPIO2_21                       0x35 0x032
+#define MX27_PAD_USBH1_SUSP__USBH1_SUSP                    0x36 0x004
+#define MX27_PAD_USBH1_SUSP__GPIO2_22                      0x36 0x032
+#define MX27_PAD_USB_PWR__USB_PWR                          0x37 0x004
+#define MX27_PAD_USB_PWR__GPIO2_23                         0x37 0x032
+#define MX27_PAD_USB_OC_B__USB_OC_B                        0x38 0x000
+#define MX27_PAD_USB_OC_B__GPIO2_24                        0x38 0x032
+#define MX27_PAD_USBH1_RCV__USBH1_RCV                      0x39 0x004
+#define MX27_PAD_USBH1_RCV__GPIO2_25                       0x39 0x032
+#define MX27_PAD_USBH1_FS__USBH1_FS                        0x3a 0x004
+#define MX27_PAD_USBH1_FS__UART4_RTS                       0x3a 0x001
+#define MX27_PAD_USBH1_FS__GPIO2_26                        0x3a 0x032
+#define MX27_PAD_USBH1_OE_B__USBH1_OE_B                    0x3b 0x004
+#define MX27_PAD_USBH1_OE_B__GPIO2_27                      0x3b 0x032
+#define MX27_PAD_USBH1_TXDM__USBH1_TXDM                    0x3c 0x004
+#define MX27_PAD_USBH1_TXDM__UART4_TXD                     0x3c 0x005
+#define MX27_PAD_USBH1_TXDM__GPIO2_28                      0x3c 0x032
+#define MX27_PAD_USBH1_TXDP__USBH1_TXDP                    0x3d 0x004
+#define MX27_PAD_USBH1_TXDP__UART4_CTS                     0x3d 0x005
+#define MX27_PAD_USBH1_TXDP__GPIO2_29                      0x3d 0x032
+#define MX27_PAD_USBH1_RXDM__USBH1_RXDM                    0x3e 0x004
+#define MX27_PAD_USBH1_RXDM__GPIO2_30                      0x3e 0x032
+#define MX27_PAD_USBH1_RXDP__USBH1_RXDP                    0x3f 0x004
+#define MX27_PAD_USBH1_RXDP__UART4_RXD                     0x3f 0x001
+#define MX27_PAD_USBH1_RXDP__GPIO2_31                      0x3f 0x032
+#define MX27_PAD_I2C2_SDA__I2C2_SDA                        0x45 0x004
+#define MX27_PAD_I2C2_SDA__GPIO3_5                         0x45 0x032
+#define MX27_PAD_I2C2_SCL__I2C2_SCL                        0x46 0x004
+#define MX27_PAD_I2C2_SCL__GPIO3_6                         0x46 0x032
+#define MX27_PAD_USBOTG_DATA5__USBOTG_DATA5                0x47 0x004
+#define MX27_PAD_USBOTG_DATA5__GPIO3_7                     0x47 0x032
+#define MX27_PAD_USBOTG_DATA6__USBOTG_DATA6                0x48 0x004
+#define MX27_PAD_USBOTG_DATA6__GPIO3_8                     0x48 0x032
+#define MX27_PAD_USBOTG_DATA0__USBOTG_DATA0                0x49 0x004
+#define MX27_PAD_USBOTG_DATA0__GPIO3_9                     0x49 0x032
+#define MX27_PAD_USBOTG_DATA2__USBOTG_DATA2                0x4a 0x004
+#define MX27_PAD_USBOTG_DATA2__GPIO3_10                    0x4a 0x032
+#define MX27_PAD_USBOTG_DATA1__USBOTG_DATA1                0x4b 0x004
+#define MX27_PAD_USBOTG_DATA1__GPIO3_11                    0x4b 0x032
+#define MX27_PAD_USBOTG_DATA4__USBOTG_DATA4                0x4c 0x004
+#define MX27_PAD_USBOTG_DATA4__GPIO3_12                    0x4c 0x032
+#define MX27_PAD_USBOTG_DATA3__USBOTG_DATA3                0x4d 0x004
+#define MX27_PAD_USBOTG_DATA3__GPIO3_13                    0x4d 0x032
+#define MX27_PAD_TOUT__TOUT                                0x4e 0x004
+#define MX27_PAD_TOUT__GPIO3_14                            0x4e 0x032
+#define MX27_PAD_TIN__TIN                                  0x4f 0x000
+#define MX27_PAD_TIN__GPIO3_15                             0x4f 0x032
+#define MX27_PAD_SSI4_FS__SSI4_FS                          0x50 0x004
+#define MX27_PAD_SSI4_FS__GPIO3_16                         0x50 0x032
+#define MX27_PAD_SSI4_RXDAT__SSI4_RXDAT                    0x51 0x004
+#define MX27_PAD_SSI4_RXDAT__GPIO3_17                      0x51 0x032
+#define MX27_PAD_SSI4_TXDAT__SSI4_TXDAT                    0x52 0x004
+#define MX27_PAD_SSI4_TXDAT__GPIO3_18                      0x52 0x032
+#define MX27_PAD_SSI4_CLK__SSI4_CLK                        0x53 0x004
+#define MX27_PAD_SSI4_CLK__GPIO3_19                        0x53 0x032
+#define MX27_PAD_SSI1_FS__SSI1_FS                          0x54 0x004
+#define MX27_PAD_SSI1_FS__GPIO3_20                         0x54 0x032
+#define MX27_PAD_SSI1_RXDAT__SSI1_RXDAT                    0x55 0x004
+#define MX27_PAD_SSI1_RXDAT__GPIO3_21                      0x55 0x032
+#define MX27_PAD_SSI1_TXDAT__SSI1_TXDAT                    0x56 0x004
+#define MX27_PAD_SSI1_TXDAT__GPIO3_22                      0x56 0x032
+#define MX27_PAD_SSI1_CLK__SSI1_CLK                        0x57 0x004
+#define MX27_PAD_SSI1_CLK__GPIO3_23                        0x57 0x032
+#define MX27_PAD_SSI2_FS__SSI2_FS                          0x58 0x004
+#define MX27_PAD_SSI2_FS__GPT5_TOUT                        0x58 0x005
+#define MX27_PAD_SSI2_FS__GPIO3_24                         0x58 0x032
+#define MX27_PAD_SSI2_RXDAT__SSI2_RXDAT                    0x59 0x004
+#define MX27_PAD_SSI2_RXDAT__GPTS_TIN                      0x59 0x001
+#define MX27_PAD_SSI2_RXDAT__GPIO3_25                      0x59 0x032
+#define MX27_PAD_SSI2_TXDAT__SSI2_TXDAT                    0x5a 0x004
+#define MX27_PAD_SSI2_TXDAT__GPT4_TOUT                     0x5a 0x005
+#define MX27_PAD_SSI2_TXDAT__GPIO3_26                      0x5a 0x032
+#define MX27_PAD_SSI2_CLK__SSI2_CLK                        0x5b 0x004
+#define MX27_PAD_SSI2_CLK__GPT4_TIN                        0x5b 0x001
+#define MX27_PAD_SSI2_CLK__GPIO3_27                        0x5b 0x032
+#define MX27_PAD_SSI3_FS__SSI3_FS                          0x5c 0x004
+#define MX27_PAD_SSI3_FS__SLCDC2_D0                        0x5c 0x001
+#define MX27_PAD_SSI3_FS__GPIO3_28                         0x5c 0x032
+#define MX27_PAD_SSI3_RXDAT__SSI3_RXDAT                    0x5d 0x004
+#define MX27_PAD_SSI3_RXDAT__SLCDC2_RS                     0x5d 0x001
+#define MX27_PAD_SSI3_RXDAT__GPIO3_29                      0x5d 0x032
+#define MX27_PAD_SSI3_TXDAT__SSI3_TXDAT                    0x5e 0x004
+#define MX27_PAD_SSI3_TXDAT__SLCDC2_CS                     0x5e 0x001
+#define MX27_PAD_SSI3_TXDAT__GPIO3_30                      0x5e 0x032
+#define MX27_PAD_SSI3_CLK__SSI3_CLK                        0x5f 0x004
+#define MX27_PAD_SSI3_CLK__SLCDC2_CLK                      0x5f 0x001
+#define MX27_PAD_SSI3_CLK__GPIO3_31                        0x5f 0x032
+#define MX27_PAD_SD3_CMD__SD3_CMD                          0x60 0x004
+#define MX27_PAD_SD3_CMD__FEC_TXD0                         0x60 0x006
+#define MX27_PAD_SD3_CMD__GPIO4_0                          0x60 0x032
+#define MX27_PAD_SD3_CLK__SD3_CLK                          0x61 0x004
+#define MX27_PAD_SD3_CLK__ETMTRACEPKT15                    0x61 0x005
+#define MX27_PAD_SD3_CLK__FEC_TXD1                         0x61 0x006
+#define MX27_PAD_SD3_CLK__GPIO4_1                          0x61 0x032
+#define MX27_PAD_ATA_DATA0__ATA_DATA0                      0x62 0x004
+#define MX27_PAD_ATA_DATA0__SD3_D0                         0x62 0x005
+#define MX27_PAD_ATA_DATA0__FEC_TXD2                       0x62 0x006
+#define MX27_PAD_ATA_DATA0__GPIO4_2                        0x62 0x032
+#define MX27_PAD_ATA_DATA1__ATA_DATA1                      0x63 0x004
+#define MX27_PAD_ATA_DATA1__SD3_D1                         0x63 0x005
+#define MX27_PAD_ATA_DATA1__FEC_TXD3                       0x63 0x006
+#define MX27_PAD_ATA_DATA1__GPIO4_3                        0x63 0x032
+#define MX27_PAD_ATA_DATA2__ATA_DATA2                      0x64 0x004
+#define MX27_PAD_ATA_DATA2__SD3_D2                         0x64 0x005
+#define MX27_PAD_ATA_DATA2__FEC_RX_ER                      0x64 0x002
+#define MX27_PAD_ATA_DATA2__GPIO4_4                        0x64 0x032
+#define MX27_PAD_ATA_DATA3__ATA_DATA3                      0x65 0x004
+#define MX27_PAD_ATA_DATA3__SD3_D3                         0x65 0x005
+#define MX27_PAD_ATA_DATA3__FEC_RXD1                       0x65 0x002
+#define MX27_PAD_ATA_DATA3__GPIO4_5                        0x65 0x032
+#define MX27_PAD_ATA_DATA4__ATA_DATA4                      0x66 0x004
+#define MX27_PAD_ATA_DATA4__ETMTRACEPKT14                  0x66 0x005
+#define MX27_PAD_ATA_DATA4__FEC_RXD2                       0x66 0x002
+#define MX27_PAD_ATA_DATA4__GPIO4_6                        0x66 0x032
+#define MX27_PAD_ATA_DATA5__ATA_DATA5                      0x67 0x004
+#define MX27_PAD_ATA_DATA5__ETMTRACEPKT13                  0x67 0x005
+#define MX27_PAD_ATA_DATA5__FEC_RXD3                       0x67 0x002
+#define MX27_PAD_ATA_DATA5__GPIO4_7                        0x67 0x032
+#define MX27_PAD_ATA_DATA6__ATA_DATA6                      0x68 0x004
+#define MX27_PAD_ATA_DATA6__FEC_MDIO                       0x68 0x005
+#define MX27_PAD_ATA_DATA6__GPIO4_8                        0x68 0x032
+#define MX27_PAD_ATA_DATA7__ATA_DATA7                      0x69 0x004
+#define MX27_PAD_ATA_DATA7__ETMTRACEPKT12                  0x69 0x005
+#define MX27_PAD_ATA_DATA7__FEC_MDC                        0x69 0x006
+#define MX27_PAD_ATA_DATA7__GPIO4_9                        0x69 0x032
+#define MX27_PAD_ATA_DATA8__ATA_DATA8                      0x6a 0x004
+#define MX27_PAD_ATA_DATA8__ETMTRACEPKT11                  0x6a 0x005
+#define MX27_PAD_ATA_DATA8__FEC_CRS                        0x6a 0x002
+#define MX27_PAD_ATA_DATA8__GPIO4_10                       0x6a 0x032
+#define MX27_PAD_ATA_DATA9__ATA_DATA9                      0x6b 0x004
+#define MX27_PAD_ATA_DATA9__ETMTRACEPKT10                  0x6b 0x005
+#define MX27_PAD_ATA_DATA9__FEC_TX_CLK                     0x6b 0x002
+#define MX27_PAD_ATA_DATA9__GPIO4_11                       0x6b 0x032
+#define MX27_PAD_ATA_DATA10__ATA_DATA10                    0x6c 0x004
+#define MX27_PAD_ATA_DATA10__ETMTRACEPKT9                  0x6c 0x005
+#define MX27_PAD_ATA_DATA10__FEC_RXD0                      0x6c 0x002
+#define MX27_PAD_ATA_DATA10__GPIO4_12                      0x6c 0x032
+#define MX27_PAD_ATA_DATA11__ATA_DATA11                    0x6d 0x004
+#define MX27_PAD_ATA_DATA11__ETMTRACEPKT8                  0x6d 0x005
+#define MX27_PAD_ATA_DATA11__FEC_RX_DV                     0x6d 0x002
+#define MX27_PAD_ATA_DATA11__GPIO4_13                      0x6d 0x032
+#define MX27_PAD_ATA_DATA12__ATA_DATA12                    0x6e 0x004
+#define MX27_PAD_ATA_DATA12__ETMTRACEPKT7                  0x6e 0x005
+#define MX27_PAD_ATA_DATA12__FEC_RX_CLK                    0x6e 0x002
+#define MX27_PAD_ATA_DATA12__GPIO4_14                      0x6e 0x032
+#define MX27_PAD_ATA_DATA13__ATA_DATA13                    0x6f 0x004
+#define MX27_PAD_ATA_DATA13__ETMTRACEPKT6                  0x6f 0x005
+#define MX27_PAD_ATA_DATA13__FEC_COL                       0x6f 0x002
+#define MX27_PAD_ATA_DATA13__GPIO4_15                      0x6f 0x032
+#define MX27_PAD_ATA_DATA14__ATA_DATA14                    0x70 0x004
+#define MX27_PAD_ATA_DATA14__ETMTRACEPKT5                  0x70 0x005
+#define MX27_PAD_ATA_DATA14__FEC_TX_ER                     0x70 0x006
+#define MX27_PAD_ATA_DATA14__GPIO4_16                      0x70 0x032
+#define MX27_PAD_I2C_DATA__I2C_DATA                        0x71 0x004
+#define MX27_PAD_I2C_DATA__GPIO4_17                        0x71 0x032
+#define MX27_PAD_I2C_CLK__I2C_CLK                          0x72 0x004
+#define MX27_PAD_I2C_CLK__GPIO4_18                         0x72 0x032
+#define MX27_PAD_CSPI2_SS2__CSPI2_SS2                      0x73 0x004
+#define MX27_PAD_CSPI2_SS2__USBH2_DATA4                    0x73 0x005
+#define MX27_PAD_CSPI2_SS2__GPIO4_19                       0x73 0x032
+#define MX27_PAD_CSPI2_SS1__CSPI2_SS1                      0x74 0x004
+#define MX27_PAD_CSPI2_SS1__USBH2_DATA3                    0x74 0x005
+#define MX27_PAD_CSPI2_SS1__GPIO4_20                       0x74 0x032
+#define MX27_PAD_CSPI2_SS0__CSPI2_SS0                      0x75 0x004
+#define MX27_PAD_CSPI2_SS0__USBH2_DATA6                    0x75 0x005
+#define MX27_PAD_CSPI2_SS0__GPIO4_21                       0x75 0x032
+#define MX27_PAD_CSPI2_SCLK__CSPI2_SCLK                    0x76 0x004
+#define MX27_PAD_CSPI2_SCLK__USBH2_DATA0                   0x76 0x005
+#define MX27_PAD_CSPI2_SCLK__GPIO4_22                      0x76 0x032
+#define MX27_PAD_CSPI2_MISO__CSPI2_MISO                    0x77 0x004
+#define MX27_PAD_CSPI2_MISO__USBH2_DATA2                   0x77 0x005
+#define MX27_PAD_CSPI2_MISO__GPIO4_23                      0x77 0x032
+#define MX27_PAD_CSPI2_MOSI__CSPI2_MOSI                    0x78 0x004
+#define MX27_PAD_CSPI2_MOSI__USBH2_DATA1                   0x78 0x005
+#define MX27_PAD_CSPI2_MOSI__GPIO4_24                      0x78 0x032
+#define MX27_PAD_CSPI1_RDY__CSPI1_RDY                      0x79 0x000
+#define MX27_PAD_CSPI1_RDY__GPIO4_25                       0x79 0x032
+#define MX27_PAD_CSPI1_SS2__CSPI1_SS2                      0x7a 0x004
+#define MX27_PAD_CSPI1_SS2__USBH2_DATA5                    0x7a 0x005
+#define MX27_PAD_CSPI1_SS2__GPIO4_26                       0x7a 0x032
+#define MX27_PAD_CSPI1_SS1__CSPI1_SS1                      0x7b 0x004
+#define MX27_PAD_CSPI1_SS1__GPIO4_27                       0x7b 0x032
+#define MX27_PAD_CSPI1_SS0__CSPI1_SS0                      0x7c 0x004
+#define MX27_PAD_CSPI1_SS0__GPIO4_28                       0x7c 0x032
+#define MX27_PAD_CSPI1_SCLK__CSPI1_SCLK                    0x7d 0x004
+#define MX27_PAD_CSPI1_SCLK__GPIO4_29                      0x7d 0x032
+#define MX27_PAD_CSPI1_MISO__CSPI1_MISO                    0x7e 0x004
+#define MX27_PAD_CSPI1_MISO__GPIO4_30                      0x7e 0x032
+#define MX27_PAD_CSPI1_MOSI__CSPI1_MOSI                    0x7f 0x004
+#define MX27_PAD_CSPI1_MOSI__GPIO4_31                      0x7f 0x032
+#define MX27_PAD_USBOTG_NXT__USBOTG_NXT                    0x80 0x000
+#define MX27_PAD_USBOTG_NXT__KP_COL6A                      0x80 0x005
+#define MX27_PAD_USBOTG_NXT__GPIO5_0                       0x80 0x032
+#define MX27_PAD_USBOTG_STP__USBOTG_STP                    0x81 0x004
+#define MX27_PAD_USBOTG_STP__KP_ROW6A                      0x81 0x005
+#define MX27_PAD_USBOTG_STP__GPIO5_1                       0x81 0x032
+#define MX27_PAD_USBOTG_DIR__USBOTG_DIR                    0x82 0x000
+#define MX27_PAD_USBOTG_DIR__KP_ROW7A                      0x82 0x005
+#define MX27_PAD_USBOTG_DIR__GPIO5_2                       0x82 0x032
+#define MX27_PAD_UART2_CTS__UART2_CTS                      0x83 0x004
+#define MX27_PAD_UART2_CTS__KP_COL7                        0x83 0x005
+#define MX27_PAD_UART2_CTS__GPIO5_3                        0x83 0x032
+#define MX27_PAD_UART2_RTS__UART2_RTS                      0x84 0x000
+#define MX27_PAD_UART2_RTS__KP_ROW7                        0x84 0x005
+#define MX27_PAD_UART2_RTS__GPIO5_4                        0x84 0x032
+#define MX27_PAD_PWMO__PWMO                                0x85 0x004
+#define MX27_PAD_PWMO__GPIO5_5                             0x85 0x032
+#define MX27_PAD_UART2_TXD__UART2_TXD                      0x86 0x004
+#define MX27_PAD_UART2_TXD__KP_COL6                        0x86 0x005
+#define MX27_PAD_UART2_TXD__GPIO5_6                        0x86 0x032
+#define MX27_PAD_UART2_RXD__UART2_RXD                      0x87 0x000
+#define MX27_PAD_UART2_RXD__KP_ROW6                        0x87 0x005
+#define MX27_PAD_UART2_RXD__GPIO5_7                        0x87 0x032
+#define MX27_PAD_UART3_TXD__UART3_TXD                      0x88 0x004
+#define MX27_PAD_UART3_TXD__GPIO5_8                        0x88 0x032
+#define MX27_PAD_UART3_RXD__UART3_RXD                      0x89 0x000
+#define MX27_PAD_UART3_RXD__GPIO5_9                        0x89 0x032
+#define MX27_PAD_UART3_CTS__UART3_CTS                      0x8a 0x004
+#define MX27_PAD_UART3_CTS__GPIO5_10                       0x8a 0x032
+#define MX27_PAD_UART3_RTS__UART3_RTS                      0x8b 0x000
+#define MX27_PAD_UART3_RTS__GPIO5_11                       0x8b 0x032
+#define MX27_PAD_UART1_TXD__UART1_TXD                      0x8c 0x004
+#define MX27_PAD_UART1_TXD__GPIO5_12                       0x8c 0x032
+#define MX27_PAD_UART1_RXD__UART1_RXD                      0x8d 0x000
+#define MX27_PAD_UART1_RXD__GPIO5_13                       0x8d 0x032
+#define MX27_PAD_UART1_CTS__UART1_CTS                      0x8e 0x004
+#define MX27_PAD_UART1_CTS__GPIO5_14                       0x8e 0x032
+#define MX27_PAD_UART1_RTS__UART1_RTS                      0x8f 0x000
+#define MX27_PAD_UART1_RTS__GPIO5_15                       0x8f 0x032
+#define MX27_PAD_RTCK__RTCK                                0x90 0x004
+#define MX27_PAD_RTCK__OWIRE                               0x90 0x005
+#define MX27_PAD_RTCK__GPIO5_16                            0x90 0x032
+#define MX27_PAD_RESET_OUT_B__RESET_OUT_B                  0x91 0x004
+#define MX27_PAD_RESET_OUT_B__GPIO5_17                     0x91 0x032
+#define MX27_PAD_SD1_D0__SD1_D0                            0x92 0x004
+#define MX27_PAD_SD1_D0__CSPI3_MISO                        0x92 0x001
+#define MX27_PAD_SD1_D0__GPIO5_18                          0x92 0x032
+#define MX27_PAD_SD1_D1__SD1_D1                            0x93 0x004
+#define MX27_PAD_SD1_D1__GPIO5_19                          0x93 0x032
+#define MX27_PAD_SD1_D2__SD1_D2                            0x94 0x004
+#define MX27_PAD_SD1_D2__GPIO5_20                          0x94 0x032
+#define MX27_PAD_SD1_D3__SD1_D3                            0x95 0x004
+#define MX27_PAD_SD1_D3__CSPI3_SS                          0x95 0x005
+#define MX27_PAD_SD1_D3__GPIO5_21                          0x95 0x032
+#define MX27_PAD_SD1_CMD__SD1_CMD                          0x96 0x004
+#define MX27_PAD_SD1_CMD__CSPI3_MOSI                       0x96 0x005
+#define MX27_PAD_SD1_CMD__GPIO5_22                         0x96 0x032
+#define MX27_PAD_SD1_CLK__SD1_CLK                          0x97 0x004
+#define MX27_PAD_SD1_CLK__CSPI3_SCLK                       0x97 0x005
+#define MX27_PAD_SD1_CLK__GPIO5_23                         0x97 0x032
+#define MX27_PAD_USBOTG_CLK__USBOTG_CLK                    0x98 0x000
+#define MX27_PAD_USBOTG_CLK__GPIO5_24                      0x98 0x032
+#define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7                0x99 0x004
+#define MX27_PAD_USBOTG_DATA7__GPIO5_25                    0x99 0x032
+#define MX27_PAD_NFRB__NFRB                                0xa0 0x000
+#define MX27_PAD_NFRB__ETMTRACEPKT3                        0xa0 0x005
+#define MX27_PAD_NFRB__GPIO6_0                             0xa0 0x032
+#define MX27_PAD_NFCLE__NFCLE                              0xa1 0x004
+#define MX27_PAD_NFCLE__ETMTRACEPKT0                       0xa1 0x005
+#define MX27_PAD_NFCLE__GPIO6_1                            0xa1 0x032
+#define MX27_PAD_NFWP_B__NFWP_B                            0xa2 0x004
+#define MX27_PAD_NFWP_B__ETMTRACEPKT1                      0xa2 0x005
+#define MX27_PAD_NFWP_B__GPIO6_2                           0xa2 0x032
+#define MX27_PAD_NFCE_B__NFCE_B                            0xa3 0x004
+#define MX27_PAD_NFCE_B__ETMTRACEPKT2                      0xa3 0x005
+#define MX27_PAD_NFCE_B__GPIO6_3                           0xa3 0x032
+#define MX27_PAD_NFALE__NFALE                              0xa4 0x004
+#define MX27_PAD_NFALE__ETMPIPESTAT0                       0xa4 0x005
+#define MX27_PAD_NFALE__GPIO6_4                            0xa4 0x032
+#define MX27_PAD_NFRE_B__NFRE_B                            0xa5 0x004
+#define MX27_PAD_NFRE_B__ETMPIPESTAT1                      0xa5 0x005
+#define MX27_PAD_NFRE_B__GPIO6_5                           0xa5 0x032
+#define MX27_PAD_NFWE_B__NFWE_B                            0xa6 0x004
+#define MX27_PAD_NFWE_B__ETMPIPESTAT2                      0xa6 0x005
+#define MX27_PAD_NFWE_B__GPIO6_6                           0xa6 0x032
+#define MX27_PAD_PC_POE__PC_POE                            0xa7 0x004
+#define MX27_PAD_PC_POE__ATA_BUFFER_EN                     0xa7 0x005
+#define MX27_PAD_PC_POE__GPIO6_7                           0xa7 0x032
+#define MX27_PAD_PC_RW_B__PC_RW_B                          0xa8 0x004
+#define MX27_PAD_PC_RW_B__ATA_IORDY                        0xa8 0x001
+#define MX27_PAD_PC_RW_B__GPIO6_8                          0xa8 0x032
+#define MX27_PAD_IOIS16__IOIS16                            0xa9 0x000
+#define MX27_PAD_IOIS16__ATA_INTRQ                         0xa9 0x001
+#define MX27_PAD_IOIS16__GPIO6_9                           0xa9 0x032
+#define MX27_PAD_PC_RST__PC_RST                            0xaa 0x004
+#define MX27_PAD_PC_RST__ATA_RESET_B                       0xaa 0x005
+#define MX27_PAD_PC_RST__GPIO6_10                          0xaa 0x032
+#define MX27_PAD_PC_BVD2__PC_BVD2                          0xab 0x000
+#define MX27_PAD_PC_BVD2__ATA_DMACK                        0xab 0x005
+#define MX27_PAD_PC_BVD2__GPIO6_11                         0xab 0x032
+#define MX27_PAD_PC_BVD1__PC_BVD1                          0xac 0x000
+#define MX27_PAD_PC_BVD1__ATA_DMARQ                        0xac 0x001
+#define MX27_PAD_PC_BVD1__GPIO6_12                         0xac 0x032
+#define MX27_PAD_PC_VS2__PC_VS2                            0xad 0x000
+#define MX27_PAD_PC_VS2__ATA_DA0                           0xad 0x005
+#define MX27_PAD_PC_VS2__GPIO6_13                          0xad 0x032
+#define MX27_PAD_PC_VS1__PC_VS1                            0xae 0x000
+#define MX27_PAD_PC_VS1__ATA_DA1                           0xae 0x005
+#define MX27_PAD_PC_VS1__GPIO6_14                          0xae 0x032
+#define MX27_PAD_CLKO__CLKO                                0xaf 0x004
+#define MX27_PAD_CLKO__GPIO6_15                            0xaf 0x032
+#define MX27_PAD_PC_PWRON__PC_PWRON                        0xb0 0x000
+#define MX27_PAD_PC_PWRON__ATA_DA2                         0xb0 0x005
+#define MX27_PAD_PC_PWRON__GPIO6_16                        0xb0 0x032
+#define MX27_PAD_PC_READY__PC_READY                        0xb1 0x000
+#define MX27_PAD_PC_READY__ATA_CS0                         0xb1 0x005
+#define MX27_PAD_PC_READY__GPIO6_17                        0xb1 0x032
+#define MX27_PAD_PC_WAIT_B__PC_WAIT_B                      0xb2 0x000
+#define MX27_PAD_PC_WAIT_B__ATA_CS1                        0xb2 0x005
+#define MX27_PAD_PC_WAIT_B__GPIO6_18                       0xb2 0x032
+#define MX27_PAD_PC_CD2_B__PC_CD2_B                        0xb3 0x000
+#define MX27_PAD_PC_CD2_B__ATA_DIOW                        0xb3 0x005
+#define MX27_PAD_PC_CD2_B__GPIO6_19                        0xb3 0x032
+#define MX27_PAD_PC_CD1_B__PC_CD1_B                        0xb4 0x000
+#define MX27_PAD_PC_CD1_B__ATA_DIOR                        0xb4 0x005
+#define MX27_PAD_PC_CD1_B__GPIO6_20                        0xb4 0x032
+#define MX27_PAD_CS4_B__CS4_B                              0xb5 0x004
+#define MX27_PAD_CS4_B__ETMTRACESYNC                       0xb5 0x005
+#define MX27_PAD_CS4_B__GPIO6_21                           0xb5 0x032
+#define MX27_PAD_CS5_B__CS5_B                              0xb6 0x004
+#define MX27_PAD_CS5_B__ETMTRACECLK                        0xb6 0x005
+#define MX27_PAD_CS5_B__GPIO6_22                           0xb6 0x032
+#define MX27_PAD_ATA_DATA15__ATA_DATA15                    0xb7 0x004
+#define MX27_PAD_ATA_DATA15__ETMTRACEPKT4                  0xb7 0x005
+#define MX27_PAD_ATA_DATA15__FEC_TX_EN                     0xb7 0x006
+#define MX27_PAD_ATA_DATA15__GPIO6_23                      0xb7 0x032
+
+#endif /* __DTS_IMX27_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
new file mode 100644
index 0000000000000..e140307be2e7d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Sascha Hauer, Pengutronix
+
+#include "imx27-pinfunc.h"
+
+#include <dt-bindings/clock/imx27-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		spi0 = &cspi1;
+		spi1 = &cspi2;
+		spi2 = &cspi3;
+	};
+
+	aitc: aitc-interrupt-controller@10040000 {
+		compatible = "fsl,imx27-aitc", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x10040000 0x1000>;
+	};
+
+	clocks {
+		clk_osc26m: osc26m {
+			compatible = "fsl,imx-osc26m", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu: cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			compatible = "arm,arm926ej-s";
+			operating-points = <
+				/* kHz uV */
+				266000 1300000
+				399000 1450000
+			>;
+			clock-latency = <62500>;
+			clocks = <&clks IMX27_CLK_CPU_DIV>;
+			voltage-tolerance = <5>;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&aitc>;
+		ranges;
+
+		aipi1: aipi@10000000 { /* AIPI1 */
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10000000 0x20000>;
+			ranges;
+
+			dma: dma@10001000 {
+				compatible = "fsl,imx27-dma";
+				reg = <0x10001000 0x1000>;
+				interrupts = <32>;
+				clocks = <&clks IMX27_CLK_DMA_IPG_GATE>,
+					 <&clks IMX27_CLK_DMA_AHB_GATE>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <1>;
+				dma-channels = <16>;
+			};
+
+			wdog: watchdog@10002000 {
+				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
+				reg = <0x10002000 0x1000>;
+				interrupts = <27>;
+				clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>;
+			};
+
+			gpt1: timer@10003000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+				reg = <0x10003000 0x1000>;
+				interrupts = <26>;
+				clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: timer@10004000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+				reg = <0x10004000 0x1000>;
+				interrupts = <25>;
+				clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt3: timer@10005000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+				reg = <0x10005000 0x1000>;
+				interrupts = <24>;
+				clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm: pwm@10006000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx27-pwm";
+				reg = <0x10006000 0x1000>;
+				interrupts = <23>;
+				clocks = <&clks IMX27_CLK_PWM_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			rtc: rtc@10007000 {
+				compatible = "fsl,imx21-rtc";
+				reg = <0x10007000 0x1000>;
+				interrupts = <22>;
+				clocks = <&clks IMX27_CLK_CKIL>,
+					 <&clks IMX27_CLK_RTC_IPG_GATE>;
+				clock-names = "ref", "ipg";
+			};
+
+			kpp: kpp@10008000 {
+				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
+				reg = <0x10008000 0x1000>;
+				interrupts = <21>;
+				clocks = <&clks IMX27_CLK_KPP_IPG_GATE>;
+				status = "disabled";
+			};
+
+			owire: owire@10009000 {
+				compatible = "fsl,imx27-owire", "fsl,imx21-owire";
+				reg = <0x10009000 0x1000>;
+				clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>;
+				status = "disabled";
+			};
+
+			uart1: serial@1000a000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1000a000 0x1000>;
+				interrupts = <20>;
+				clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@1000b000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1000b000 0x1000>;
+				interrupts = <19>;
+				clocks = <&clks IMX27_CLK_UART2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@1000c000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1000c000 0x1000>;
+				interrupts = <18>;
+				clocks = <&clks IMX27_CLK_UART3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@1000d000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1000d000 0x1000>;
+				interrupts = <17>;
+				clocks = <&clks IMX27_CLK_UART4_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			cspi1: spi@1000e000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-cspi";
+				reg = <0x1000e000 0x1000>;
+				interrupts = <16>;
+				clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			cspi2: spi@1000f000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-cspi";
+				reg = <0x1000f000 0x1000>;
+				interrupts = <15>;
+				clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			ssi1: ssi@10010000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+				reg = <0x10010000 0x1000>;
+				interrupts = <14>;
+				clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>;
+				dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
+				dma-names = "rx0", "tx0", "rx1", "tx1";
+				fsl,fifo-depth = <8>;
+				status = "disabled";
+			};
+
+			ssi2: ssi@10011000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+				reg = <0x10011000 0x1000>;
+				interrupts = <13>;
+				clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>;
+				dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
+				dma-names = "rx0", "tx0", "rx1", "tx1";
+				fsl,fifo-depth = <8>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@10012000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
+				reg = <0x10012000 0x1000>;
+				interrupts = <12>;
+				clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>;
+				status = "disabled";
+			};
+
+			sdhci1: mmc@10013000 {
+				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+				reg = <0x10013000 0x1000>;
+				interrupts = <11>;
+				clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&dma 7>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			sdhci2: mmc@10014000 {
+				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+				reg = <0x10014000 0x1000>;
+				interrupts = <10>;
+				clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&dma 6>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@10015000 {
+				compatible = "fsl,imx27-iomuxc";
+				reg = <0x10015000 0x600>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				gpio1: gpio@10015000 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015000 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@10015100 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015100 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio@10015200 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015200 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio@10015300 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015300 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio5: gpio@10015400 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015400 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio6: gpio@10015500 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015500 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+			};
+
+			audmux: audmux@10016000 {
+				compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
+				reg = <0x10016000 0x1000>;
+				clocks = <&clks IMX27_CLK_DUMMY>;
+				clock-names = "audmux";
+				status = "disabled";
+			};
+
+			cspi3: spi@10017000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-cspi";
+				reg = <0x10017000 0x1000>;
+				interrupts = <6>;
+				clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt4: timer@10019000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+				reg = <0x10019000 0x1000>;
+				interrupts = <4>;
+				clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt5: timer@1001a000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+				reg = <0x1001a000 0x1000>;
+				interrupts = <3>;
+				clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			uart5: serial@1001b000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1001b000 0x1000>;
+				interrupts = <49>;
+				clocks = <&clks IMX27_CLK_UART5_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@1001c000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1001c000 0x1000>;
+				interrupts = <48>;
+				clocks = <&clks IMX27_CLK_UART6_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@1001d000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
+				reg = <0x1001d000 0x1000>;
+				interrupts = <1>;
+				clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>;
+				status = "disabled";
+			};
+
+			sdhci3: mmc@1001e000 {
+				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+				reg = <0x1001e000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&dma 36>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			gpt6: timer@1001f000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+				reg = <0x1001f000 0x1000>;
+				interrupts = <2>;
+				clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+		};
+
+		aipi2: aipi@10020000 { /* AIPI2 */
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10020000 0x20000>;
+			ranges;
+
+			fb: fb@10021000 {
+				compatible = "fsl,imx27-fb", "fsl,imx21-fb";
+				interrupts = <61>;
+				reg = <0x10021000 0x1000>;
+				clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>,
+					 <&clks IMX27_CLK_LCDC_AHB_GATE>,
+					 <&clks IMX27_CLK_PER3_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			coda: coda@10023000 {
+				compatible = "fsl,imx27-vpu", "cnm,codadx6";
+				reg = <0x10023000 0x0200>;
+				interrupts = <53>;
+				clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>,
+					 <&clks IMX27_CLK_VPU_AHB_GATE>;
+				clock-names = "per", "ahb";
+				iram = <&iram>;
+			};
+
+			usbotg: usb@10024000 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024000 0x200>;
+				interrupts = <56>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@10024200 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024200 0x200>;
+				interrupts = <54>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 1>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh2: usb@10024400 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024400 0x200>;
+				interrupts = <55>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@10024600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx27-usbmisc";
+				reg = <0x10024600 0x200>;
+			};
+
+			sahara2: crypto@10025000 {
+				compatible = "fsl,imx27-sahara";
+				reg = <0x10025000 0x1000>;
+				interrupts = <59>;
+				clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX27_CLK_SAHARA_AHB_GATE>;
+				clock-names = "ipg", "ahb";
+			};
+
+			clks: ccm@10027000{
+				compatible = "fsl,imx27-ccm";
+				reg = <0x10027000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			iim: efuse@10028000 {
+				compatible = "fsl,imx27-iim";
+				reg = <0x10028000 0x1000>;
+				interrupts = <62>;
+				clocks = <&clks IMX27_CLK_IIM_IPG_GATE>;
+			};
+
+			fec: ethernet@1002b000 {
+				compatible = "fsl,imx27-fec";
+				reg = <0x1002b000 0x1000>;
+				interrupts = <50>;
+				clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
+					 <&clks IMX27_CLK_FEC_AHB_GATE>;
+				clock-names = "ipg", "ahb";
+				status = "disabled";
+			};
+		};
+
+		nfc: nand-controller@d8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,imx27-nand";
+			reg = <0xd8000000 0x1000>;
+			interrupts = <29>;
+			clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>;
+			status = "disabled";
+		};
+
+		weim: weim@d8002000 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "fsl,imx27-weim";
+			reg = <0xd8002000 0x1000>;
+			clocks = <&clks IMX27_CLK_EMI_AHB_GATE>;
+			ranges = <
+				0 0 0xc0000000 0x08000000
+				1 0 0xc8000000 0x08000000
+				2 0 0xd0000000 0x02000000
+				3 0 0xd2000000 0x02000000
+				4 0 0xd4000000 0x02000000
+				5 0 0xd6000000 0x02000000
+			>;
+			status = "disabled";
+		};
+
+		iram: sram@ffff4c00 {
+			compatible = "mmio-sram";
+			reg = <0xffff4c00 0xb400>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx31-bug.dts b/arch/arm/boot/dts/nxp/imx/imx31-bug.dts
new file mode 100644
index 0000000000000..d87eee3f9b3cd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx31-bug.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ */
+
+/dts-v1/;
+#include "imx31.dtsi"
+
+/ {
+	model = "Buglabs i.MX31 Bug 1.x";
+	compatible = "buglabs,imx31-bug", "fsl,imx31";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128M */
+	};
+};
+
+&uart5 {
+	uart-has-rtscts;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx31-lite.dts b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
new file mode 100644
index 0000000000000..d17abdfb6330c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
+
+/dts-v1/;
+
+#include "imx31.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "LogicPD i.MX31 Lite";
+	compatible = "logicpd,imx31-lite", "fsl,imx31";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ata {
+	status = "okay";
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13783";
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		regulators {
+			sw1a {		/* QVCC */
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw1b {		/* QVCC */
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw2a {		/* 1.8V_DDR, NVCC2, NVCC21 and NVCC22 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw2b {		/* NVCC10 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			violo {		/* NVCC1 and NVCC7 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			viohi {		/* VIOHI */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vaudio {	/* VAUDIO */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vcam {		/* NVCC4 */
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vgen {		/* NVCC5 / NVCC8 and NVCC6 / NVCC9 */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc2 {		/* NVCC3 */
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&uart1 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Routed to the extension board */
+&uart2 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Routed to the extension board */
+&uart3 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x0 0x200000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x0000cf03 0xa0330d01 0x00220800>;
+	};
+
+	ethernet@4,0 {
+		compatible = "smsc,lan9117", "smsc,lan9115";
+		reg = <4 0x0 0x100>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		fsl,weim-cs-timing = <0x00008701 0x04000541 0x00010000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx31.dtsi b/arch/arm/boot/dts/nxp/imx/imx31.dtsi
new file mode 100644
index 0000000000000..95c05f17a6d55
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx31.dtsi
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
+// Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		spi2 = &spi3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm1136jf-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	avic: interrupt-controller@68000000 {
+		compatible = "fsl,imx31-avic", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x68000000 0x100000>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&avic>;
+		ranges;
+
+		iram: sram@1fffc000 {
+			compatible = "mmio-sram";
+			reg = <0x1fffc000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1fffc000 0x4000>;
+		};
+
+		aips1: bus@43f00000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x43f00000 0x100000>;
+			ranges;
+
+			i2c1: i2c@43f80000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f80000 0x4000>;
+				interrupts = <10>;
+				clocks = <&clks 33>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f84000 0x4000>;
+				interrupts = <3>;
+				clocks = <&clks 35>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ata: ata@43f8c000 {
+				compatible = "fsl,imx31-pata", "fsl,imx27-pata";
+				reg = <0x43f8c000 0x4000>;
+				interrupts = <15>;
+				clocks = <&clks 26>;
+				status = "disabled";
+			};
+
+			uart1: serial@43f90000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x43f90000 0x4000>;
+				interrupts = <45>;
+				clocks = <&clks 10>, <&clks 30>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@43f94000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x43f94000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks 10>, <&clks 31>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@43f98000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f98000 0x4000>;
+				interrupts = <4>;
+				clocks = <&clks 34>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@43fa4000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x43fa4000 0x4000>;
+				interrupts = <14>;
+				clocks = <&clks 10>, <&clks 53>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 8 8 0>, <&sdma 9 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			kpp: kpp@43fa8000 {
+				compatible = "fsl,imx31-kpp", "fsl,imx21-kpp";
+				reg = <0x43fa8000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks 46>;
+				status = "disabled";
+			};
+
+			uart4: serial@43fb0000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x43fb0000 0x4000>;
+				clocks = <&clks 10>, <&clks 49>;
+				clock-names = "ipg", "per";
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			uart5: serial@43fb4000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x43fb4000 0x4000>;
+				interrupts = <47>;
+				clocks = <&clks 10>, <&clks 50>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		spba-bus@50000000 {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x100000>;
+			ranges;
+
+			sdhci1: mmc@50004000 {
+				compatible = "fsl,imx31-mmc";
+				reg = <0x50004000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 10>, <&clks 20>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 20 3 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			sdhci2: mmc@50008000 {
+				compatible = "fsl,imx31-mmc";
+				reg = <0x50008000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 10>, <&clks 21>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 21 3 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			uart3: serial@5000c000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x5000c000 0x4000>;
+				interrupts = <18>;
+				clocks = <&clks 10>, <&clks 48>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			spi2: spi@50010000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x50010000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks 10>, <&clks 54>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 6 8 0>, <&sdma 7 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			iim: efuse@5001c000 {
+				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
+				reg = <0x5001c000 0x1000>;
+				interrupts = <19>;
+				clocks = <&clks 25>;
+			};
+		};
+
+		bus@53f00000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x53f00000 0x100000>;
+			ranges;
+
+			clks: ccm@53f80000{
+				compatible = "fsl,imx31-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>, <53>;
+				#clock-cells = <1>;
+			};
+
+			spi3: spi@53f84000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <17>;
+				clocks = <&clks 10>, <&clks 28>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 10 8 0>, <&sdma 11 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			gpt: timer@53f90000 {
+				compatible = "fsl,imx31-gpt";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks 10>, <&clks 22>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <56>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			rng@53fb0000 {
+				compatible = "fsl,imx31-rnga";
+				reg = <0x53fb0000 0x4000>;
+				interrupts = <22>;
+				clocks = <&clks 29>;
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma: dma-controller@53fd4000 {
+				compatible = "fsl,imx31-sdma";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <34>;
+				clocks = <&clks 10>, <&clks 27>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx31.bin";
+			};
+
+			rtc: rtc@53fd8000 {
+				compatible = "fsl,imx31-rtc", "fsl,imx21-rtc";
+				reg = <0x53fd8000 0x4000>;
+				interrupts = <25>;
+				clocks = <&clks 2>, <&clks 40>;
+				clock-names = "ref", "ipg";
+			};
+
+			wdog: watchdog@53fdc000 {
+				compatible = "fsl,imx31-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 41>;
+				interrupts = <55>;
+			};
+
+			pwm: pwm@53fe0000 {
+				compatible = "fsl,imx31-pwm", "fsl,imx27-pwm";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <26>;
+				clocks = <&clks 10>, <&clks 42>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		emi@b8000000 { /* External Memory Interface */
+			compatible = "simple-bus";
+			reg = <0xb8000000 0x5000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nfc: nand@b8000000 {
+				compatible = "fsl,imx31-nand", "fsl,imx27-nand";
+				reg = <0xb8000000 0x1000>;
+				interrupts = <33>;
+				clocks = <&clks 9>;
+				dmas = <&sdma 30 17 0>;
+				dma-names = "rx-tx";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+			};
+
+			weim: weim@b8002000 {
+				compatible = "fsl,imx31-weim", "fsl,imx27-weim";
+				reg = <0xb8002000 0x1000>;
+				clocks = <&clks 56>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges = <0 0 0xa0000000 0x08000000
+					  1 0 0xa8000000 0x08000000
+					  2 0 0xb0000000 0x02000000
+					  3 0 0xb2000000 0x02000000
+					  4 0 0xb4000000 0x02000000
+					  5 0 0xb6000000 0x02000000>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
new file mode 100644
index 0000000000000..17bd2a97609ab
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,cpuimx35", "fsl,imx35";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsc2007: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		gpios = <&gpio3 2 0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0x2 0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007_1>;
+		reg = <0x48>;
+		ti,x-plate-ohms = <180>;
+	};
+};
+
+&iomuxc {
+	imx35-eukrea {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
+				MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
+				MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX35_PAD_FEC_COL__FEC_COL		0x80000000
+				MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
+				MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
+				MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
+				MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
+				MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
+				MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
+				MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
+				MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
+				MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
+				MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
+				MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
+				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
+			>;
+		};
+
+		pinctrl_tsc2007_1: tsc2007grp-1 {
+			fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-mbimxsd35-baseboard.dts
new file mode 100644
index 0000000000000..7f4f812b08111
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx35-eukrea-cpuimx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bp1>;
+
+		button {
+			label = "BP1";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led1>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx35-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,mux-int-port = <1>;
+		fsl,mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx35-eukrea {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
+				MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
+				MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
+				MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
+			>;
+		};
+
+		pinctrl_bp1: bp1grp {
+			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+				MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
+			>;
+		};
+
+		pinctrl_led1: led1grp {
+			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
+		};
+
+		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
+			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+				MX35_PAD_CTS1__UART1_CTS		0x1c5
+				MX35_PAD_RTS1__UART1_RTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
+				MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
+				MX35_PAD_RTS2__UART2_RTS		0x1c5
+				MX35_PAD_CTS2__UART2_CTS		0x1c5
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	phy_type = "serial";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "otg";
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx35-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx35-pdk.dts
new file mode 100644
index 0000000000000..ddce0a844758b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx35-pdk.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+// Copyright 2014 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "imx35.dtsi"
+
+/ {
+	model = "Freescale i.MX35 Product Development Kit";
+	compatible = "fsl,imx35-pdk", "fsl,imx35";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>,
+		      <0x90000000 0x8000000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx35-pdk {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+				MX35_PAD_CTS1__UART1_CTS		0x1c5
+				MX35_PAD_RTS1__UART1_RTS		0x1c5
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <16>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx35-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx35-pinfunc.h
new file mode 100644
index 0000000000000..9d6cc9564b724
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx35-pinfunc.h
@@ -0,0 +1,966 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX35_PINFUNC_H
+#define __DTS_IMX35_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX35_PAD_CAPTURE__GPT_CAPIN1				0x004 0x328 0x000 0x0 0x0
+#define MX35_PAD_CAPTURE__GPT_CMPOUT2				0x004 0x328 0x000 0x1 0x0
+#define MX35_PAD_CAPTURE__CSPI2_SS1				0x004 0x328 0x7f4 0x2 0x0
+#define MX35_PAD_CAPTURE__EPIT1_EPITO				0x004 0x328 0x000 0x3 0x0
+#define MX35_PAD_CAPTURE__CCM_CLK32K				0x004 0x328 0x7d0 0x4 0x0
+#define MX35_PAD_CAPTURE__GPIO1_4				0x004 0x328 0x850 0x5 0x0
+#define MX35_PAD_COMPARE__GPT_CMPOUT1				0x008 0x32c 0x000 0x0 0x0
+#define MX35_PAD_COMPARE__GPT_CAPIN2				0x008 0x32c 0x000 0x1 0x0
+#define MX35_PAD_COMPARE__GPT_CMPOUT3				0x008 0x32c 0x000 0x2 0x0
+#define MX35_PAD_COMPARE__EPIT2_EPITO				0x008 0x32c 0x000 0x3 0x0
+#define MX35_PAD_COMPARE__GPIO1_5				0x008 0x32c 0x854 0x5 0x0
+#define MX35_PAD_COMPARE__SDMA_EXTDMA_2				0x008 0x32c 0x000 0x7 0x0
+#define MX35_PAD_WDOG_RST__WDOG_WDOG_B				0x00c 0x330 0x000 0x0 0x0
+#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE			0x00c 0x330 0x000 0x3 0x0
+#define MX35_PAD_WDOG_RST__GPIO1_6				0x00c 0x330 0x858 0x5 0x0
+#define MX35_PAD_GPIO1_0__GPIO1_0				0x010 0x334 0x82c 0x0 0x0
+#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY				0x010 0x334 0x7d4 0x1 0x0
+#define MX35_PAD_GPIO1_0__OWIRE_LINE				0x010 0x334 0x990 0x2 0x0
+#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0				0x010 0x334 0x000 0x7 0x0
+#define MX35_PAD_GPIO1_1__GPIO1_1				0x014 0x338 0x838 0x0 0x0
+#define MX35_PAD_GPIO1_1__PWM_PWMO				0x014 0x338 0x000 0x2 0x0
+#define MX35_PAD_GPIO1_1__CSPI1_SS2				0x014 0x338 0x7d8 0x3 0x0
+#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT			0x014 0x338 0x000 0x6 0x0
+#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1				0x014 0x338 0x000 0x7 0x0
+#define MX35_PAD_GPIO2_0__GPIO2_0				0x018 0x33c 0x868 0x0 0x0
+#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK			0x018 0x33c 0x000 0x1 0x0
+#define MX35_PAD_GPIO3_0__GPIO3_0				0x01c 0x340 0x8e8 0x0 0x0
+#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK			0x01c 0x340 0x000 0x1 0x0
+#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B			0x000 0x344 0x000 0x0 0x0
+#define MX35_PAD_POR_B__CCM_POR_B				0x000 0x348 0x000 0x0 0x0
+#define MX35_PAD_CLKO__CCM_CLKO					0x020 0x34c 0x000 0x0 0x0
+#define MX35_PAD_CLKO__GPIO1_8					0x020 0x34c 0x860 0x5 0x0
+#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0			0x000 0x350 0x000 0x0 0x0
+#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1			0x000 0x354 0x000 0x0 0x0
+#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0			0x000 0x358 0x000 0x0 0x0
+#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1			0x000 0x35c 0x000 0x0 0x0
+#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26		0x000 0x360 0x000 0x0 0x0
+#define MX35_PAD_VSTBY__CCM_VSTBY				0x024 0x364 0x000 0x0 0x0
+#define MX35_PAD_VSTBY__GPIO1_7					0x024 0x364 0x85c 0x5 0x0
+#define MX35_PAD_A0__EMI_EIM_DA_L_0				0x028 0x368 0x000 0x0 0x0
+#define MX35_PAD_A1__EMI_EIM_DA_L_1				0x02c 0x36c 0x000 0x0 0x0
+#define MX35_PAD_A2__EMI_EIM_DA_L_2				0x030 0x370 0x000 0x0 0x0
+#define MX35_PAD_A3__EMI_EIM_DA_L_3				0x034 0x374 0x000 0x0 0x0
+#define MX35_PAD_A4__EMI_EIM_DA_L_4				0x038 0x378 0x000 0x0 0x0
+#define MX35_PAD_A5__EMI_EIM_DA_L_5				0x03c 0x37c 0x000 0x0 0x0
+#define MX35_PAD_A6__EMI_EIM_DA_L_6				0x040 0x380 0x000 0x0 0x0
+#define MX35_PAD_A7__EMI_EIM_DA_L_7				0x044 0x384 0x000 0x0 0x0
+#define MX35_PAD_A8__EMI_EIM_DA_H_8				0x048 0x388 0x000 0x0 0x0
+#define MX35_PAD_A9__EMI_EIM_DA_H_9				0x04c 0x38c 0x000 0x0 0x0
+#define MX35_PAD_A10__EMI_EIM_DA_H_10				0x050 0x390 0x000 0x0 0x0
+#define MX35_PAD_MA10__EMI_MA10					0x054 0x394 0x000 0x0 0x0
+#define MX35_PAD_A11__EMI_EIM_DA_H_11				0x058 0x398 0x000 0x0 0x0
+#define MX35_PAD_A12__EMI_EIM_DA_H_12				0x05c 0x39c 0x000 0x0 0x0
+#define MX35_PAD_A13__EMI_EIM_DA_H_13				0x060 0x3a0 0x000 0x0 0x0
+#define MX35_PAD_A14__EMI_EIM_DA_H2_14				0x064 0x3a4 0x000 0x0 0x0
+#define MX35_PAD_A15__EMI_EIM_DA_H2_15				0x068 0x3a8 0x000 0x0 0x0
+#define MX35_PAD_A16__EMI_EIM_A_16				0x06c 0x3ac 0x000 0x0 0x0
+#define MX35_PAD_A17__EMI_EIM_A_17				0x070 0x3b0 0x000 0x0 0x0
+#define MX35_PAD_A18__EMI_EIM_A_18				0x074 0x3b4 0x000 0x0 0x0
+#define MX35_PAD_A19__EMI_EIM_A_19				0x078 0x3b8 0x000 0x0 0x0
+#define MX35_PAD_A20__EMI_EIM_A_20				0x07c 0x3bc 0x000 0x0 0x0
+#define MX35_PAD_A21__EMI_EIM_A_21				0x080 0x3c0 0x000 0x0 0x0
+#define MX35_PAD_A22__EMI_EIM_A_22				0x084 0x3c4 0x000 0x0 0x0
+#define MX35_PAD_A23__EMI_EIM_A_23				0x088 0x3c8 0x000 0x0 0x0
+#define MX35_PAD_A24__EMI_EIM_A_24				0x08c 0x3cc 0x000 0x0 0x0
+#define MX35_PAD_A25__EMI_EIM_A_25				0x090 0x3d0 0x000 0x0 0x0
+#define MX35_PAD_SDBA1__EMI_EIM_SDBA1				0x000 0x3d4 0x000 0x0 0x0
+#define MX35_PAD_SDBA0__EMI_EIM_SDBA0				0x000 0x3d8 0x000 0x0 0x0
+#define MX35_PAD_SD0__EMI_DRAM_D_0				0x000 0x3dc 0x000 0x0 0x0
+#define MX35_PAD_SD1__EMI_DRAM_D_1				0x000 0x3e0 0x000 0x0 0x0
+#define MX35_PAD_SD2__EMI_DRAM_D_2				0x000 0x3e4 0x000 0x0 0x0
+#define MX35_PAD_SD3__EMI_DRAM_D_3				0x000 0x3e8 0x000 0x0 0x0
+#define MX35_PAD_SD4__EMI_DRAM_D_4				0x000 0x3ec 0x000 0x0 0x0
+#define MX35_PAD_SD5__EMI_DRAM_D_5				0x000 0x3f0 0x000 0x0 0x0
+#define MX35_PAD_SD6__EMI_DRAM_D_6				0x000 0x3f4 0x000 0x0 0x0
+#define MX35_PAD_SD7__EMI_DRAM_D_7				0x000 0x3f8 0x000 0x0 0x0
+#define MX35_PAD_SD8__EMI_DRAM_D_8				0x000 0x3fc 0x000 0x0 0x0
+#define MX35_PAD_SD9__EMI_DRAM_D_9				0x000 0x400 0x000 0x0 0x0
+#define MX35_PAD_SD10__EMI_DRAM_D_10				0x000 0x404 0x000 0x0 0x0
+#define MX35_PAD_SD11__EMI_DRAM_D_11				0x000 0x408 0x000 0x0 0x0
+#define MX35_PAD_SD12__EMI_DRAM_D_12				0x000 0x40c 0x000 0x0 0x0
+#define MX35_PAD_SD13__EMI_DRAM_D_13				0x000 0x410 0x000 0x0 0x0
+#define MX35_PAD_SD14__EMI_DRAM_D_14				0x000 0x414 0x000 0x0 0x0
+#define MX35_PAD_SD15__EMI_DRAM_D_15				0x000 0x418 0x000 0x0 0x0
+#define MX35_PAD_SD16__EMI_DRAM_D_16				0x000 0x41c 0x000 0x0 0x0
+#define MX35_PAD_SD17__EMI_DRAM_D_17				0x000 0x420 0x000 0x0 0x0
+#define MX35_PAD_SD18__EMI_DRAM_D_18				0x000 0x424 0x000 0x0 0x0
+#define MX35_PAD_SD19__EMI_DRAM_D_19				0x000 0x428 0x000 0x0 0x0
+#define MX35_PAD_SD20__EMI_DRAM_D_20				0x000 0x42c 0x000 0x0 0x0
+#define MX35_PAD_SD21__EMI_DRAM_D_21				0x000 0x430 0x000 0x0 0x0
+#define MX35_PAD_SD22__EMI_DRAM_D_22				0x000 0x434 0x000 0x0 0x0
+#define MX35_PAD_SD23__EMI_DRAM_D_23				0x000 0x438 0x000 0x0 0x0
+#define MX35_PAD_SD24__EMI_DRAM_D_24				0x000 0x43c 0x000 0x0 0x0
+#define MX35_PAD_SD25__EMI_DRAM_D_25				0x000 0x440 0x000 0x0 0x0
+#define MX35_PAD_SD26__EMI_DRAM_D_26				0x000 0x444 0x000 0x0 0x0
+#define MX35_PAD_SD27__EMI_DRAM_D_27				0x000 0x448 0x000 0x0 0x0
+#define MX35_PAD_SD28__EMI_DRAM_D_28				0x000 0x44c 0x000 0x0 0x0
+#define MX35_PAD_SD29__EMI_DRAM_D_29				0x000 0x450 0x000 0x0 0x0
+#define MX35_PAD_SD30__EMI_DRAM_D_30				0x000 0x454 0x000 0x0 0x0
+#define MX35_PAD_SD31__EMI_DRAM_D_31				0x000 0x458 0x000 0x0 0x0
+#define MX35_PAD_DQM0__EMI_DRAM_DQM_0				0x000 0x45c 0x000 0x0 0x0
+#define MX35_PAD_DQM1__EMI_DRAM_DQM_1				0x000 0x460 0x000 0x0 0x0
+#define MX35_PAD_DQM2__EMI_DRAM_DQM_2				0x000 0x464 0x000 0x0 0x0
+#define MX35_PAD_DQM3__EMI_DRAM_DQM_3				0x000 0x468 0x000 0x0 0x0
+#define MX35_PAD_EB0__EMI_EIM_EB0_B				0x094 0x46c 0x000 0x0 0x0
+#define MX35_PAD_EB1__EMI_EIM_EB1_B				0x098 0x470 0x000 0x0 0x0
+#define MX35_PAD_OE__EMI_EIM_OE					0x09c 0x474 0x000 0x0 0x0
+#define MX35_PAD_CS0__EMI_EIM_CS0				0x0a0 0x478 0x000 0x0 0x0
+#define MX35_PAD_CS1__EMI_EIM_CS1				0x0a4 0x47c 0x000 0x0 0x0
+#define MX35_PAD_CS1__EMI_NANDF_CE3				0x0a4 0x47c 0x000 0x3 0x0
+#define MX35_PAD_CS2__EMI_EIM_CS2				0x0a8 0x480 0x000 0x0 0x0
+#define MX35_PAD_CS3__EMI_EIM_CS3				0x0ac 0x484 0x000 0x0 0x0
+#define MX35_PAD_CS4__EMI_EIM_CS4				0x0b0 0x488 0x000 0x0 0x0
+#define MX35_PAD_CS4__EMI_DTACK_B				0x0b0 0x488 0x800 0x1 0x0
+#define MX35_PAD_CS4__EMI_NANDF_CE1				0x0b0 0x488 0x000 0x3 0x0
+#define MX35_PAD_CS4__GPIO1_20					0x0b0 0x488 0x83c 0x5 0x0
+#define MX35_PAD_CS5__EMI_EIM_CS5				0x0b4 0x48c 0x000 0x0 0x0
+#define MX35_PAD_CS5__CSPI2_SS2					0x0b4 0x48c 0x7f8 0x1 0x0
+#define MX35_PAD_CS5__CSPI1_SS2					0x0b4 0x48c 0x7d8 0x2 0x1
+#define MX35_PAD_CS5__EMI_NANDF_CE2				0x0b4 0x48c 0x000 0x3 0x0
+#define MX35_PAD_CS5__GPIO1_21					0x0b4 0x48c 0x840 0x5 0x0
+#define MX35_PAD_NF_CE0__EMI_NANDF_CE0				0x0b8 0x490 0x000 0x0 0x0
+#define MX35_PAD_NF_CE0__GPIO1_22				0x0b8 0x490 0x844 0x5 0x0
+#define MX35_PAD_ECB__EMI_EIM_ECB				0x000 0x494 0x000 0x0 0x0
+#define MX35_PAD_LBA__EMI_EIM_LBA				0x0bc 0x498 0x000 0x0 0x0
+#define MX35_PAD_BCLK__EMI_EIM_BCLK				0x0c0 0x49c 0x000 0x0 0x0
+#define MX35_PAD_RW__EMI_EIM_RW					0x0c4 0x4a0 0x000 0x0 0x0
+#define MX35_PAD_RAS__EMI_DRAM_RAS				0x000 0x4a4 0x000 0x0 0x0
+#define MX35_PAD_CAS__EMI_DRAM_CAS				0x000 0x4a8 0x000 0x0 0x0
+#define MX35_PAD_SDWE__EMI_DRAM_SDWE				0x000 0x4ac 0x000 0x0 0x0
+#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0			0x000 0x4b0 0x000 0x0 0x0
+#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1			0x000 0x4b4 0x000 0x0 0x0
+#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK				0x000 0x4b8 0x000 0x0 0x0
+#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0				0x000 0x4bc 0x000 0x0 0x0
+#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1				0x000 0x4c0 0x000 0x0 0x0
+#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2				0x000 0x4c4 0x000 0x0 0x0
+#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3				0x000 0x4c8 0x000 0x0 0x0
+#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B				0x0c8 0x4cc 0x000 0x0 0x0
+#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3			0x0c8 0x4cc 0x9d8 0x1 0x0
+#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC			0x0c8 0x4cc 0x924 0x2 0x0
+#define MX35_PAD_NFWE_B__GPIO2_18				0x0c8 0x4cc 0x88c 0x5 0x0
+#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0			0x0c8 0x4cc 0x000 0x7 0x0
+#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B				0x0cc 0x4d0 0x000 0x0 0x0
+#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR			0x0cc 0x4d0 0x9ec 0x1 0x0
+#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK				0x0cc 0x4d0 0x000 0x2 0x0
+#define MX35_PAD_NFRE_B__GPIO2_19				0x0cc 0x4d0 0x890 0x5 0x0
+#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1			0x0cc 0x4d0 0x000 0x7 0x0
+#define MX35_PAD_NFALE__EMI_NANDF_ALE				0x0d0 0x4d4 0x000 0x0 0x0
+#define MX35_PAD_NFALE__USB_TOP_USBH2_STP			0x0d0 0x4d4 0x000 0x1 0x0
+#define MX35_PAD_NFALE__IPU_DISPB_CS0				0x0d0 0x4d4 0x000 0x2 0x0
+#define MX35_PAD_NFALE__GPIO2_20				0x0d0 0x4d4 0x898 0x5 0x0
+#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2			0x0d0 0x4d4 0x000 0x7 0x0
+#define MX35_PAD_NFCLE__EMI_NANDF_CLE				0x0d4 0x4d8 0x000 0x0 0x0
+#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT			0x0d4 0x4d8 0x9f0 0x1 0x0
+#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS			0x0d4 0x4d8 0x000 0x2 0x0
+#define MX35_PAD_NFCLE__GPIO2_21				0x0d4 0x4d8 0x89c 0x5 0x0
+#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3			0x0d4 0x4d8 0x000 0x7 0x0
+#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B				0x0d8 0x4dc 0x000 0x0 0x0
+#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7			0x0d8 0x4dc 0x9e8 0x1 0x0
+#define MX35_PAD_NFWP_B__IPU_DISPB_WR				0x0d8 0x4dc 0x000 0x2 0x0
+#define MX35_PAD_NFWP_B__GPIO2_22				0x0d8 0x4dc 0x8a0 0x5 0x0
+#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL			0x0d8 0x4dc 0x000 0x7 0x0
+#define MX35_PAD_NFRB__EMI_NANDF_RB				0x0dc 0x4e0 0x000 0x0 0x0
+#define MX35_PAD_NFRB__IPU_DISPB_RD				0x0dc 0x4e0 0x000 0x2 0x0
+#define MX35_PAD_NFRB__GPIO2_23					0x0dc 0x4e0 0x8a4 0x5 0x0
+#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK				0x0dc 0x4e0 0x000 0x7 0x0
+#define MX35_PAD_D15__EMI_EIM_D_15				0x000 0x4e4 0x000 0x0 0x0
+#define MX35_PAD_D14__EMI_EIM_D_14				0x000 0x4e8 0x000 0x0 0x0
+#define MX35_PAD_D13__EMI_EIM_D_13				0x000 0x4ec 0x000 0x0 0x0
+#define MX35_PAD_D12__EMI_EIM_D_12				0x000 0x4f0 0x000 0x0 0x0
+#define MX35_PAD_D11__EMI_EIM_D_11				0x000 0x4f4 0x000 0x0 0x0
+#define MX35_PAD_D10__EMI_EIM_D_10				0x000 0x4f8 0x000 0x0 0x0
+#define MX35_PAD_D9__EMI_EIM_D_9				0x000 0x4fc 0x000 0x0 0x0
+#define MX35_PAD_D8__EMI_EIM_D_8				0x000 0x500 0x000 0x0 0x0
+#define MX35_PAD_D7__EMI_EIM_D_7				0x000 0x504 0x000 0x0 0x0
+#define MX35_PAD_D6__EMI_EIM_D_6				0x000 0x508 0x000 0x0 0x0
+#define MX35_PAD_D5__EMI_EIM_D_5				0x000 0x50c 0x000 0x0 0x0
+#define MX35_PAD_D4__EMI_EIM_D_4				0x000 0x510 0x000 0x0 0x0
+#define MX35_PAD_D3__EMI_EIM_D_3				0x000 0x514 0x000 0x0 0x0
+#define MX35_PAD_D2__EMI_EIM_D_2				0x000 0x518 0x000 0x0 0x0
+#define MX35_PAD_D1__EMI_EIM_D_1				0x000 0x51c 0x000 0x0 0x0
+#define MX35_PAD_D0__EMI_EIM_D_0				0x000 0x520 0x000 0x0 0x0
+#define MX35_PAD_CSI_D8__IPU_CSI_D_8				0x0e0 0x524 0x000 0x0 0x0
+#define MX35_PAD_CSI_D8__KPP_COL_0				0x0e0 0x524 0x950 0x1 0x0
+#define MX35_PAD_CSI_D8__GPIO1_20				0x0e0 0x524 0x83c 0x5 0x1
+#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13			0x0e0 0x524 0x000 0x7 0x0
+#define MX35_PAD_CSI_D9__IPU_CSI_D_9				0x0e4 0x528 0x000 0x0 0x0
+#define MX35_PAD_CSI_D9__KPP_COL_1				0x0e4 0x528 0x954 0x1 0x0
+#define MX35_PAD_CSI_D9__GPIO1_21				0x0e4 0x528 0x840 0x5 0x1
+#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14			0x0e4 0x528 0x000 0x7 0x0
+#define MX35_PAD_CSI_D10__IPU_CSI_D_10				0x0e8 0x52c 0x000 0x0 0x0
+#define MX35_PAD_CSI_D10__KPP_COL_2				0x0e8 0x52c 0x958 0x1 0x0
+#define MX35_PAD_CSI_D10__GPIO1_22				0x0e8 0x52c 0x844 0x5 0x1
+#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15			0x0e8 0x52c 0x000 0x7 0x0
+#define MX35_PAD_CSI_D11__IPU_CSI_D_11				0x0ec 0x530 0x000 0x0 0x0
+#define MX35_PAD_CSI_D11__KPP_COL_3				0x0ec 0x530 0x95c 0x1 0x0
+#define MX35_PAD_CSI_D11__GPIO1_23				0x0ec 0x530 0x000 0x5 0x0
+#define MX35_PAD_CSI_D12__IPU_CSI_D_12				0x0f0 0x534 0x000 0x0 0x0
+#define MX35_PAD_CSI_D12__KPP_ROW_0				0x0f0 0x534 0x970 0x1 0x0
+#define MX35_PAD_CSI_D12__GPIO1_24				0x0f0 0x534 0x000 0x5 0x0
+#define MX35_PAD_CSI_D13__IPU_CSI_D_13				0x0f4 0x538 0x000 0x0 0x0
+#define MX35_PAD_CSI_D13__KPP_ROW_1				0x0f4 0x538 0x974 0x1 0x0
+#define MX35_PAD_CSI_D13__GPIO1_25				0x0f4 0x538 0x000 0x5 0x0
+#define MX35_PAD_CSI_D14__IPU_CSI_D_14				0x0f8 0x53c 0x000 0x0 0x0
+#define MX35_PAD_CSI_D14__KPP_ROW_2				0x0f8 0x53c 0x978 0x1 0x0
+#define MX35_PAD_CSI_D14__GPIO1_26				0x0f8 0x53c 0x000 0x5 0x0
+#define MX35_PAD_CSI_D15__IPU_CSI_D_15				0x0fc 0x540 0x97c 0x0 0x0
+#define MX35_PAD_CSI_D15__KPP_ROW_3				0x0fc 0x540 0x000 0x1 0x0
+#define MX35_PAD_CSI_D15__GPIO1_27				0x0fc 0x540 0x000 0x5 0x0
+#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK				0x100 0x544 0x000 0x0 0x0
+#define MX35_PAD_CSI_MCLK__GPIO1_28				0x100 0x544 0x000 0x5 0x0
+#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC			0x104 0x548 0x000 0x0 0x0
+#define MX35_PAD_CSI_VSYNC__GPIO1_29				0x104 0x548 0x000 0x5 0x0
+#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC			0x108 0x54c 0x000 0x0 0x0
+#define MX35_PAD_CSI_HSYNC__GPIO1_30				0x108 0x54c 0x000 0x5 0x0
+#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK			0x10c 0x550 0x000 0x0 0x0
+#define MX35_PAD_CSI_PIXCLK__GPIO1_31				0x10c 0x550 0x000 0x5 0x0
+#define MX35_PAD_I2C1_CLK__I2C1_SCL				0x110 0x554 0x000 0x0 0x0
+#define MX35_PAD_I2C1_CLK__GPIO2_24				0x110 0x554 0x8a8 0x5 0x0
+#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK			0x110 0x554 0x000 0x6 0x0
+#define MX35_PAD_I2C1_DAT__I2C1_SDA				0x114 0x558 0x000 0x0 0x0
+#define MX35_PAD_I2C1_DAT__GPIO2_25				0x114 0x558 0x8ac 0x5 0x0
+#define MX35_PAD_I2C2_CLK__I2C2_SCL				0x118 0x55c 0x000 0x0 0x0
+#define MX35_PAD_I2C2_CLK__CAN1_TXCAN				0x118 0x55c 0x000 0x1 0x0
+#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR			0x118 0x55c 0x000 0x2 0x0
+#define MX35_PAD_I2C2_CLK__GPIO2_26				0x118 0x55c 0x8b0 0x5 0x0
+#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2		0x118 0x55c 0x000 0x6 0x0
+#define MX35_PAD_I2C2_DAT__I2C2_SDA				0x11c 0x560 0x000 0x0 0x0
+#define MX35_PAD_I2C2_DAT__CAN1_RXCAN				0x11c 0x560 0x7c8 0x1 0x0
+#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC			0x11c 0x560 0x9f4 0x2 0x0
+#define MX35_PAD_I2C2_DAT__GPIO2_27				0x11c 0x560 0x8b4 0x5 0x0
+#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3		0x11c 0x560 0x000 0x6 0x0
+#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD				0x120 0x564 0x000 0x0 0x0
+#define MX35_PAD_STXD4__GPIO2_28				0x120 0x564 0x8b8 0x5 0x0
+#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0		0x120 0x564 0x000 0x7 0x0
+#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD				0x124 0x568 0x000 0x0 0x0
+#define MX35_PAD_SRXD4__GPIO2_29				0x124 0x568 0x8bc 0x5 0x0
+#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1		0x124 0x568 0x000 0x7 0x0
+#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC				0x128 0x56c 0x000 0x0 0x0
+#define MX35_PAD_SCK4__GPIO2_30					0x128 0x56c 0x8c4 0x5 0x0
+#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2			0x128 0x56c 0x000 0x7 0x0
+#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS			0x12c 0x570 0x000 0x0 0x0
+#define MX35_PAD_STXFS4__GPIO2_31				0x12c 0x570 0x8c8 0x5 0x0
+#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3		0x12c 0x570 0x000 0x7 0x0
+#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD				0x130 0x574 0x000 0x0 0x0
+#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1			0x130 0x574 0x000 0x1 0x0
+#define MX35_PAD_STXD5__CSPI2_MOSI				0x130 0x574 0x7ec 0x2 0x0
+#define MX35_PAD_STXD5__GPIO1_0					0x130 0x574 0x82c 0x5 0x1
+#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4		0x130 0x574 0x000 0x7 0x0
+#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD				0x134 0x578 0x000 0x0 0x0
+#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1				0x134 0x578 0x998 0x1 0x0
+#define MX35_PAD_SRXD5__CSPI2_MISO				0x134 0x578 0x7e8 0x2 0x0
+#define MX35_PAD_SRXD5__GPIO1_1					0x134 0x578 0x838 0x5 0x1
+#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5		0x134 0x578 0x000 0x7 0x0
+#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC				0x138 0x57c 0x000 0x0 0x0
+#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK			0x138 0x57c 0x994 0x1 0x0
+#define MX35_PAD_SCK5__CSPI2_SCLK				0x138 0x57c 0x7e0 0x2 0x0
+#define MX35_PAD_SCK5__GPIO1_2					0x138 0x57c 0x848 0x5 0x0
+#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6			0x138 0x57c 0x000 0x7 0x0
+#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS			0x13c 0x580 0x000 0x0 0x0
+#define MX35_PAD_STXFS5__CSPI2_RDY				0x13c 0x580 0x7e4 0x2 0x0
+#define MX35_PAD_STXFS5__GPIO1_3				0x13c 0x580 0x84c 0x5 0x0
+#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7		0x13c 0x580 0x000 0x7 0x0
+#define MX35_PAD_SCKR__ESAI_SCKR				0x140 0x584 0x000 0x0 0x0
+#define MX35_PAD_SCKR__GPIO1_4					0x140 0x584 0x850 0x5 0x1
+#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10			0x140 0x584 0x000 0x7 0x0
+#define MX35_PAD_FSR__ESAI_FSR					0x144 0x588 0x000 0x0 0x0
+#define MX35_PAD_FSR__GPIO1_5					0x144 0x588 0x854 0x5 0x1
+#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11			0x144 0x588 0x000 0x7 0x0
+#define MX35_PAD_HCKR__ESAI_HCKR				0x148 0x58c 0x000 0x0 0x0
+#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS				0x148 0x58c 0x000 0x1 0x0
+#define MX35_PAD_HCKR__CSPI2_SS0				0x148 0x58c 0x7f0 0x2 0x0
+#define MX35_PAD_HCKR__IPU_FLASH_STROBE				0x148 0x58c 0x000 0x3 0x0
+#define MX35_PAD_HCKR__GPIO1_6					0x148 0x58c 0x858 0x5 0x1
+#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12			0x148 0x58c 0x000 0x7 0x0
+#define MX35_PAD_SCKT__ESAI_SCKT				0x14c 0x590 0x000 0x0 0x0
+#define MX35_PAD_SCKT__GPIO1_7					0x14c 0x590 0x85c 0x5 0x1
+#define MX35_PAD_SCKT__IPU_CSI_D_0				0x14c 0x590 0x930 0x6 0x0
+#define MX35_PAD_SCKT__KPP_ROW_2				0x14c 0x590 0x978 0x7 0x1
+#define MX35_PAD_FST__ESAI_FST					0x150 0x594 0x000 0x0 0x0
+#define MX35_PAD_FST__GPIO1_8					0x150 0x594 0x860 0x5 0x1
+#define MX35_PAD_FST__IPU_CSI_D_1				0x150 0x594 0x934 0x6 0x0
+#define MX35_PAD_FST__KPP_ROW_3					0x150 0x594 0x97c 0x7 0x1
+#define MX35_PAD_HCKT__ESAI_HCKT				0x154 0x598 0x000 0x0 0x0
+#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC				0x154 0x598 0x7a8 0x1 0x0
+#define MX35_PAD_HCKT__GPIO1_9					0x154 0x598 0x864 0x5 0x0
+#define MX35_PAD_HCKT__IPU_CSI_D_2				0x154 0x598 0x938 0x6 0x0
+#define MX35_PAD_HCKT__KPP_COL_3				0x154 0x598 0x95c 0x7 0x1
+#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0				0x158 0x59c 0x000 0x0 0x0
+#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC			0x158 0x59c 0x000 0x1 0x0
+#define MX35_PAD_TX5_RX0__CSPI2_SS2				0x158 0x59c 0x7f8 0x2 0x1
+#define MX35_PAD_TX5_RX0__CAN2_TXCAN				0x158 0x59c 0x000 0x3 0x0
+#define MX35_PAD_TX5_RX0__UART2_DTR				0x158 0x59c 0x000 0x4 0x0
+#define MX35_PAD_TX5_RX0__GPIO1_10				0x158 0x59c 0x830 0x5 0x0
+#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0		0x158 0x59c 0x000 0x7 0x0
+#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1				0x15c 0x5a0 0x000 0x0 0x0
+#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS			0x15c 0x5a0 0x000 0x1 0x0
+#define MX35_PAD_TX4_RX1__CSPI2_SS3				0x15c 0x5a0 0x7fc 0x2 0x0
+#define MX35_PAD_TX4_RX1__CAN2_RXCAN				0x15c 0x5a0 0x7cc 0x3 0x0
+#define MX35_PAD_TX4_RX1__UART2_DSR				0x15c 0x5a0 0x000 0x4 0x0
+#define MX35_PAD_TX4_RX1__GPIO1_11				0x15c 0x5a0 0x834 0x5 0x0
+#define MX35_PAD_TX4_RX1__IPU_CSI_D_3				0x15c 0x5a0 0x93c 0x6 0x0
+#define MX35_PAD_TX4_RX1__KPP_ROW_0				0x15c 0x5a0 0x970 0x7 0x1
+#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2				0x160 0x5a4 0x000 0x0 0x0
+#define MX35_PAD_TX3_RX2__I2C3_SCL				0x160 0x5a4 0x91c 0x1 0x0
+#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1				0x160 0x5a4 0x000 0x3 0x0
+#define MX35_PAD_TX3_RX2__GPIO1_12				0x160 0x5a4 0x000 0x5 0x0
+#define MX35_PAD_TX3_RX2__IPU_CSI_D_4				0x160 0x5a4 0x940 0x6 0x0
+#define MX35_PAD_TX3_RX2__KPP_ROW_1				0x160 0x5a4 0x974 0x7 0x1
+#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3				0x164 0x5a8 0x000 0x0 0x0
+#define MX35_PAD_TX2_RX3__I2C3_SDA				0x164 0x5a8 0x920 0x1 0x0
+#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2				0x164 0x5a8 0x000 0x3 0x0
+#define MX35_PAD_TX2_RX3__GPIO1_13				0x164 0x5a8 0x000 0x5 0x0
+#define MX35_PAD_TX2_RX3__IPU_CSI_D_5				0x164 0x5a8 0x944 0x6 0x0
+#define MX35_PAD_TX2_RX3__KPP_COL_0				0x164 0x5a8 0x950 0x7 0x1
+#define MX35_PAD_TX1__ESAI_TX1					0x168 0x5ac 0x000 0x0 0x0
+#define MX35_PAD_TX1__CCM_PMIC_RDY				0x168 0x5ac 0x7d4 0x1 0x1
+#define MX35_PAD_TX1__CSPI1_SS2					0x168 0x5ac 0x7d8 0x2 0x2
+#define MX35_PAD_TX1__EMI_NANDF_CE3				0x168 0x5ac 0x000 0x3 0x0
+#define MX35_PAD_TX1__UART2_RI					0x168 0x5ac 0x000 0x4 0x0
+#define MX35_PAD_TX1__GPIO1_14					0x168 0x5ac 0x000 0x5 0x0
+#define MX35_PAD_TX1__IPU_CSI_D_6				0x168 0x5ac 0x948 0x6 0x0
+#define MX35_PAD_TX1__KPP_COL_1					0x168 0x5ac 0x954 0x7 0x1
+#define MX35_PAD_TX0__ESAI_TX0					0x16c 0x5b0 0x000 0x0 0x0
+#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK			0x16c 0x5b0 0x994 0x1 0x1
+#define MX35_PAD_TX0__CSPI1_SS3					0x16c 0x5b0 0x7dc 0x2 0x0
+#define MX35_PAD_TX0__EMI_DTACK_B				0x16c 0x5b0 0x800 0x3 0x1
+#define MX35_PAD_TX0__UART2_DCD					0x16c 0x5b0 0x000 0x4 0x0
+#define MX35_PAD_TX0__GPIO1_15					0x16c 0x5b0 0x000 0x5 0x0
+#define MX35_PAD_TX0__IPU_CSI_D_7				0x16c 0x5b0 0x94c 0x6 0x0
+#define MX35_PAD_TX0__KPP_COL_2					0x16c 0x5b0 0x958 0x7 0x1
+#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI				0x170 0x5b4 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_MOSI__GPIO1_16				0x170 0x5b4 0x000 0x5 0x0
+#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2		0x170 0x5b4 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_MISO__CSPI1_MISO				0x174 0x5b8 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_MISO__GPIO1_17				0x174 0x5b8 0x000 0x5 0x0
+#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3		0x174 0x5b8 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_SS0__CSPI1_SS0				0x178 0x5bc 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_SS0__OWIRE_LINE				0x178 0x5bc 0x990 0x1 0x1
+#define MX35_PAD_CSPI1_SS0__CSPI2_SS3				0x178 0x5bc 0x7fc 0x2 0x1
+#define MX35_PAD_CSPI1_SS0__GPIO1_18				0x178 0x5bc 0x000 0x5 0x0
+#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4			0x178 0x5bc 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_SS1__CSPI1_SS1				0x17c 0x5c0 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_SS1__PWM_PWMO				0x17c 0x5c0 0x000 0x1 0x0
+#define MX35_PAD_CSPI1_SS1__CCM_CLK32K				0x17c 0x5c0 0x7d0 0x2 0x1
+#define MX35_PAD_CSPI1_SS1__GPIO1_19				0x17c 0x5c0 0x000 0x5 0x0
+#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29			0x17c 0x5c0 0x000 0x6 0x0
+#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5			0x17c 0x5c0 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK				0x180 0x5c4 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_SCLK__GPIO3_4				0x180 0x5c4 0x904 0x5 0x0
+#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30			0x180 0x5c4 0x000 0x6 0x0
+#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1		0x180 0x5c4 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY			0x184 0x5c8 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5				0x184 0x5c8 0x908 0x5 0x0
+#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31			0x184 0x5c8 0x000 0x6 0x0
+#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2	0x184 0x5c8 0x000 0x7 0x0
+#define MX35_PAD_RXD1__UART1_RXD_MUX				0x188 0x5cc 0x000 0x0 0x0
+#define MX35_PAD_RXD1__CSPI2_MOSI				0x188 0x5cc 0x7ec 0x1 0x1
+#define MX35_PAD_RXD1__KPP_COL_4				0x188 0x5cc 0x960 0x4 0x0
+#define MX35_PAD_RXD1__GPIO3_6					0x188 0x5cc 0x90c 0x5 0x0
+#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16			0x188 0x5cc 0x000 0x7 0x0
+#define MX35_PAD_TXD1__UART1_TXD_MUX				0x18c 0x5d0 0x000 0x0 0x0
+#define MX35_PAD_TXD1__CSPI2_MISO				0x18c 0x5d0 0x7e8 0x1 0x1
+#define MX35_PAD_TXD1__KPP_COL_5				0x18c 0x5d0 0x964 0x4 0x0
+#define MX35_PAD_TXD1__GPIO3_7					0x18c 0x5d0 0x910 0x5 0x0
+#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17			0x18c 0x5d0 0x000 0x7 0x0
+#define MX35_PAD_RTS1__UART1_RTS				0x190 0x5d4 0x000 0x0 0x0
+#define MX35_PAD_RTS1__CSPI2_SCLK				0x190 0x5d4 0x7e0 0x1 0x1
+#define MX35_PAD_RTS1__I2C3_SCL					0x190 0x5d4 0x91c 0x2 0x1
+#define MX35_PAD_RTS1__IPU_CSI_D_0				0x190 0x5d4 0x930 0x3 0x1
+#define MX35_PAD_RTS1__KPP_COL_6				0x190 0x5d4 0x968 0x4 0x0
+#define MX35_PAD_RTS1__GPIO3_8					0x190 0x5d4 0x914 0x5 0x0
+#define MX35_PAD_RTS1__EMI_NANDF_CE1				0x190 0x5d4 0x000 0x6 0x0
+#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18			0x190 0x5d4 0x000 0x7 0x0
+#define MX35_PAD_CTS1__UART1_CTS				0x194 0x5d8 0x000 0x0 0x0
+#define MX35_PAD_CTS1__CSPI2_RDY				0x194 0x5d8 0x7e4 0x1 0x1
+#define MX35_PAD_CTS1__I2C3_SDA					0x194 0x5d8 0x920 0x2 0x1
+#define MX35_PAD_CTS1__IPU_CSI_D_1				0x194 0x5d8 0x934 0x3 0x1
+#define MX35_PAD_CTS1__KPP_COL_7				0x194 0x5d8 0x96c 0x4 0x0
+#define MX35_PAD_CTS1__GPIO3_9					0x194 0x5d8 0x918 0x5 0x0
+#define MX35_PAD_CTS1__EMI_NANDF_CE2				0x194 0x5d8 0x000 0x6 0x0
+#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19			0x194 0x5d8 0x000 0x7 0x0
+#define MX35_PAD_RXD2__UART2_RXD_MUX				0x198 0x5dc 0x000 0x0 0x0
+#define MX35_PAD_RXD2__KPP_ROW_4				0x198 0x5dc 0x980 0x4 0x0
+#define MX35_PAD_RXD2__GPIO3_10					0x198 0x5dc 0x8ec 0x5 0x0
+#define MX35_PAD_TXD2__UART2_TXD_MUX				0x19c 0x5e0 0x000 0x0 0x0
+#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK			0x19c 0x5e0 0x994 0x1 0x2
+#define MX35_PAD_TXD2__KPP_ROW_5				0x19c 0x5e0 0x984 0x4 0x0
+#define MX35_PAD_TXD2__GPIO3_11					0x19c 0x5e0 0x8f0 0x5 0x0
+#define MX35_PAD_RTS2__UART2_RTS				0x1a0 0x5e4 0x000 0x0 0x0
+#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1				0x1a0 0x5e4 0x998 0x1 0x1
+#define MX35_PAD_RTS2__CAN2_RXCAN				0x1a0 0x5e4 0x7cc 0x2 0x1
+#define MX35_PAD_RTS2__IPU_CSI_D_2				0x1a0 0x5e4 0x938 0x3 0x1
+#define MX35_PAD_RTS2__KPP_ROW_6				0x1a0 0x5e4 0x988 0x4 0x0
+#define MX35_PAD_RTS2__GPIO3_12					0x1a0 0x5e4 0x8f4 0x5 0x0
+#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC				0x1a0 0x5e4 0x000 0x6 0x0
+#define MX35_PAD_RTS2__UART3_RXD_MUX				0x1a0 0x5e4 0x9a0 0x7 0x0
+#define MX35_PAD_CTS2__UART2_CTS				0x1a4 0x5e8 0x000 0x0 0x0
+#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1				0x1a4 0x5e8 0x000 0x1 0x0
+#define MX35_PAD_CTS2__CAN2_TXCAN				0x1a4 0x5e8 0x000 0x2 0x0
+#define MX35_PAD_CTS2__IPU_CSI_D_3				0x1a4 0x5e8 0x93c 0x3 0x1
+#define MX35_PAD_CTS2__KPP_ROW_7				0x1a4 0x5e8 0x98c 0x4 0x0
+#define MX35_PAD_CTS2__GPIO3_13					0x1a4 0x5e8 0x8f8 0x5 0x0
+#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS				0x1a4 0x5e8 0x000 0x6 0x0
+#define MX35_PAD_CTS2__UART3_TXD_MUX				0x1a4 0x5e8 0x000 0x7 0x0
+#define MX35_PAD_RTCK__ARM11P_TOP_RTCK				0x000 0x5ec 0x000 0x0 0x0
+#define MX35_PAD_TCK__SJC_TCK					0x000 0x5f0 0x000 0x0 0x0
+#define MX35_PAD_TMS__SJC_TMS					0x000 0x5f4 0x000 0x0 0x0
+#define MX35_PAD_TDI__SJC_TDI					0x000 0x5f8 0x000 0x0 0x0
+#define MX35_PAD_TDO__SJC_TDO					0x000 0x5fc 0x000 0x0 0x0
+#define MX35_PAD_TRSTB__SJC_TRSTB				0x000 0x600 0x000 0x0 0x0
+#define MX35_PAD_DE_B__SJC_DE_B					0x000 0x604 0x000 0x0 0x0
+#define MX35_PAD_SJC_MOD__SJC_MOD				0x000 0x608 0x000 0x0 0x0
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR			0x1a8 0x60c 0x000 0x0 0x0
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR			0x1a8 0x60c 0x000 0x1 0x0
+#define MX35_PAD_USBOTG_PWR__GPIO3_14				0x1a8 0x60c 0x8fc 0x5 0x0
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC			0x1ac 0x610 0x000 0x0 0x0
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC			0x1ac 0x610 0x9f4 0x1 0x1
+#define MX35_PAD_USBOTG_OC__GPIO3_15				0x1ac 0x610 0x900 0x5 0x0
+#define MX35_PAD_LD0__IPU_DISPB_DAT_0				0x1b0 0x614 0x000 0x0 0x0
+#define MX35_PAD_LD0__GPIO2_0					0x1b0 0x614 0x868 0x5 0x1
+#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0			0x1b0 0x614 0x000 0x6 0x0
+#define MX35_PAD_LD1__IPU_DISPB_DAT_1				0x1b4 0x618 0x000 0x0 0x0
+#define MX35_PAD_LD1__GPIO2_1					0x1b4 0x618 0x894 0x5 0x0
+#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1			0x1b4 0x618 0x000 0x6 0x0
+#define MX35_PAD_LD2__IPU_DISPB_DAT_2				0x1b8 0x61c 0x000 0x0 0x0
+#define MX35_PAD_LD2__GPIO2_2					0x1b8 0x61c 0x8c0 0x5 0x0
+#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2			0x1b8 0x61c 0x000 0x6 0x0
+#define MX35_PAD_LD3__IPU_DISPB_DAT_3				0x1bc 0x620 0x000 0x0 0x0
+#define MX35_PAD_LD3__GPIO2_3					0x1bc 0x620 0x8cc 0x5 0x0
+#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3			0x1bc 0x620 0x000 0x6 0x0
+#define MX35_PAD_LD4__IPU_DISPB_DAT_4				0x1c0 0x624 0x000 0x0 0x0
+#define MX35_PAD_LD4__GPIO2_4					0x1c0 0x624 0x8d0 0x5 0x0
+#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4			0x1c0 0x624 0x000 0x6 0x0
+#define MX35_PAD_LD5__IPU_DISPB_DAT_5				0x1c4 0x628 0x000 0x0 0x0
+#define MX35_PAD_LD5__GPIO2_5					0x1c4 0x628 0x8d4 0x5 0x0
+#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5			0x1c4 0x628 0x000 0x6 0x0
+#define MX35_PAD_LD6__IPU_DISPB_DAT_6				0x1c8 0x62c 0x000 0x0 0x0
+#define MX35_PAD_LD6__GPIO2_6					0x1c8 0x62c 0x8d8 0x5 0x0
+#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6			0x1c8 0x62c 0x000 0x6 0x0
+#define MX35_PAD_LD7__IPU_DISPB_DAT_7				0x1cc 0x630 0x000 0x0 0x0
+#define MX35_PAD_LD7__GPIO2_7					0x1cc 0x630 0x8dc 0x5 0x0
+#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7			0x1cc 0x630 0x000 0x6 0x0
+#define MX35_PAD_LD8__IPU_DISPB_DAT_8				0x1d0 0x634 0x000 0x0 0x0
+#define MX35_PAD_LD8__GPIO2_8					0x1d0 0x634 0x8e0 0x5 0x0
+#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			0x1d0 0x634 0x000 0x6 0x0
+#define MX35_PAD_LD9__IPU_DISPB_DAT_9				0x1d4 0x638 0x000 0x0 0x0
+#define MX35_PAD_LD9__GPIO2_9					0x1d4 0x638 0x8e4 0x5 0x0
+#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			0x1d4 0x638 0x000 0x6 0x0
+#define MX35_PAD_LD10__IPU_DISPB_DAT_10				0x1d8 0x63c 0x000 0x0 0x0
+#define MX35_PAD_LD10__GPIO2_10					0x1d8 0x63c 0x86c 0x5 0x0
+#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10			0x1d8 0x63c 0x000 0x6 0x0
+#define MX35_PAD_LD11__IPU_DISPB_DAT_11				0x1dc 0x640 0x000 0x0 0x0
+#define MX35_PAD_LD11__GPIO2_11					0x1dc 0x640 0x870 0x5 0x0
+#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11			0x1dc 0x640 0x000 0x6 0x0
+#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4			0x1dc 0x640 0x000 0x7 0x0
+#define MX35_PAD_LD12__IPU_DISPB_DAT_12				0x1e0 0x644 0x000 0x0 0x0
+#define MX35_PAD_LD12__GPIO2_12					0x1e0 0x644 0x874 0x5 0x0
+#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12			0x1e0 0x644 0x000 0x6 0x0
+#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5			0x1e0 0x644 0x000 0x7 0x0
+#define MX35_PAD_LD13__IPU_DISPB_DAT_13				0x1e4 0x648 0x000 0x0 0x0
+#define MX35_PAD_LD13__GPIO2_13					0x1e4 0x648 0x878 0x5 0x0
+#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13			0x1e4 0x648 0x000 0x6 0x0
+#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6			0x1e4 0x648 0x000 0x7 0x0
+#define MX35_PAD_LD14__IPU_DISPB_DAT_14				0x1e8 0x64c 0x000 0x0 0x0
+#define MX35_PAD_LD14__GPIO2_14					0x1e8 0x64c 0x87c 0x5 0x0
+#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0		0x1e8 0x64c 0x000 0x6 0x0
+#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7			0x1e8 0x64c 0x000 0x7 0x0
+#define MX35_PAD_LD15__IPU_DISPB_DAT_15				0x1ec 0x650 0x000 0x0 0x0
+#define MX35_PAD_LD15__GPIO2_15					0x1ec 0x650 0x880 0x5 0x0
+#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1		0x1ec 0x650 0x000 0x6 0x0
+#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8			0x1ec 0x650 0x000 0x7 0x0
+#define MX35_PAD_LD16__IPU_DISPB_DAT_16				0x1f0 0x654 0x000 0x0 0x0
+#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC			0x1f0 0x654 0x928 0x2 0x0
+#define MX35_PAD_LD16__GPIO2_16					0x1f0 0x654 0x884 0x5 0x0
+#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2		0x1f0 0x654 0x000 0x6 0x0
+#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9			0x1f0 0x654 0x000 0x7 0x0
+#define MX35_PAD_LD17__IPU_DISPB_DAT_17				0x1f4 0x658 0x000 0x0 0x0
+#define MX35_PAD_LD17__IPU_DISPB_CS2				0x1f4 0x658 0x000 0x2 0x0
+#define MX35_PAD_LD17__GPIO2_17					0x1f4 0x658 0x888 0x5 0x0
+#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3		0x1f4 0x658 0x000 0x6 0x0
+#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10			0x1f4 0x658 0x000 0x7 0x0
+#define MX35_PAD_LD18__IPU_DISPB_DAT_18				0x1f8 0x65c 0x000 0x0 0x0
+#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC			0x1f8 0x65c 0x924 0x1 0x1
+#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC			0x1f8 0x65c 0x928 0x2 0x1
+#define MX35_PAD_LD18__ESDHC3_CMD				0x1f8 0x65c 0x818 0x3 0x0
+#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3			0x1f8 0x65c 0x9b0 0x4 0x0
+#define MX35_PAD_LD18__GPIO3_24					0x1f8 0x65c 0x000 0x5 0x0
+#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4		0x1f8 0x65c 0x000 0x6 0x0
+#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11			0x1f8 0x65c 0x000 0x7 0x0
+#define MX35_PAD_LD19__IPU_DISPB_DAT_19				0x1fc 0x660 0x000 0x0 0x0
+#define MX35_PAD_LD19__IPU_DISPB_BCLK				0x1fc 0x660 0x000 0x1 0x0
+#define MX35_PAD_LD19__IPU_DISPB_CS1				0x1fc 0x660 0x000 0x2 0x0
+#define MX35_PAD_LD19__ESDHC3_CLK				0x1fc 0x660 0x814 0x3 0x0
+#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR			0x1fc 0x660 0x9c4 0x4 0x0
+#define MX35_PAD_LD19__GPIO3_25					0x1fc 0x660 0x000 0x5 0x0
+#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5		0x1fc 0x660 0x000 0x6 0x0
+#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12			0x1fc 0x660 0x000 0x7 0x0
+#define MX35_PAD_LD20__IPU_DISPB_DAT_20				0x200 0x664 0x000 0x0 0x0
+#define MX35_PAD_LD20__IPU_DISPB_CS0				0x200 0x664 0x000 0x1 0x0
+#define MX35_PAD_LD20__IPU_DISPB_SD_CLK				0x200 0x664 0x000 0x2 0x0
+#define MX35_PAD_LD20__ESDHC3_DAT0				0x200 0x664 0x81c 0x3 0x0
+#define MX35_PAD_LD20__GPIO3_26					0x200 0x664 0x000 0x5 0x0
+#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3		0x200 0x664 0x000 0x6 0x0
+#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13			0x200 0x664 0x000 0x7 0x0
+#define MX35_PAD_LD21__IPU_DISPB_DAT_21				0x204 0x668 0x000 0x0 0x0
+#define MX35_PAD_LD21__IPU_DISPB_PAR_RS				0x204 0x668 0x000 0x1 0x0
+#define MX35_PAD_LD21__IPU_DISPB_SER_RS				0x204 0x668 0x000 0x2 0x0
+#define MX35_PAD_LD21__ESDHC3_DAT1				0x204 0x668 0x820 0x3 0x0
+#define MX35_PAD_LD21__USB_TOP_USBOTG_STP			0x204 0x668 0x000 0x4 0x0
+#define MX35_PAD_LD21__GPIO3_27					0x204 0x668 0x000 0x5 0x0
+#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x204 0x668 0x000 0x6 0x0
+#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14			0x204 0x668 0x000 0x7 0x0
+#define MX35_PAD_LD22__IPU_DISPB_DAT_22				0x208 0x66c 0x000 0x0 0x0
+#define MX35_PAD_LD22__IPU_DISPB_WR				0x208 0x66c 0x000 0x1 0x0
+#define MX35_PAD_LD22__IPU_DISPB_SD_D_I				0x208 0x66c 0x92c 0x2 0x0
+#define MX35_PAD_LD22__ESDHC3_DAT2				0x208 0x66c 0x824 0x3 0x0
+#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT			0x208 0x66c 0x9c8 0x4 0x0
+#define MX35_PAD_LD22__GPIO3_28					0x208 0x66c 0x000 0x5 0x0
+#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR			0x208 0x66c 0x000 0x6 0x0
+#define MX35_PAD_LD22__ARM11P_TOP_TRCTL				0x208 0x66c 0x000 0x7 0x0
+#define MX35_PAD_LD23__IPU_DISPB_DAT_23				0x20c 0x670 0x000 0x0 0x0
+#define MX35_PAD_LD23__IPU_DISPB_RD				0x20c 0x670 0x000 0x1 0x0
+#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO			0x20c 0x670 0x92c 0x2 0x1
+#define MX35_PAD_LD23__ESDHC3_DAT3				0x20c 0x670 0x828 0x3 0x0
+#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7			0x20c 0x670 0x9c0 0x4 0x0
+#define MX35_PAD_LD23__GPIO3_29					0x20c 0x670 0x000 0x5 0x0
+#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS			0x20c 0x670 0x000 0x6 0x0
+#define MX35_PAD_LD23__ARM11P_TOP_TRCLK				0x20c 0x670 0x000 0x7 0x0
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC			0x210 0x674 0x000 0x0 0x0
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO			0x210 0x674 0x92c 0x2 0x2
+#define MX35_PAD_D3_HSYNC__GPIO3_30				0x210 0x674 0x000 0x5 0x0
+#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE		0x210 0x674 0x000 0x6 0x0
+#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15			0x210 0x674 0x000 0x7 0x0
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK			0x214 0x678 0x000 0x0 0x0
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK			0x214 0x678 0x000 0x2 0x0
+#define MX35_PAD_D3_FPSHIFT__GPIO3_31				0x214 0x678 0x000 0x5 0x0
+#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0	0x214 0x678 0x000 0x6 0x0
+#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16		0x214 0x678 0x000 0x7 0x0
+#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY			0x218 0x67c 0x000 0x0 0x0
+#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O			0x218 0x67c 0x000 0x2 0x0
+#define MX35_PAD_D3_DRDY__GPIO1_0				0x218 0x67c 0x82c 0x5 0x2
+#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1		0x218 0x67c 0x000 0x6 0x0
+#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17			0x218 0x67c 0x000 0x7 0x0
+#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR			0x21c 0x680 0x000 0x0 0x0
+#define MX35_PAD_CONTRAST__GPIO1_1				0x21c 0x680 0x838 0x5 0x2
+#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2	0x21c 0x680 0x000 0x6 0x0
+#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18			0x21c 0x680 0x000 0x7 0x0
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC			0x220 0x684 0x000 0x0 0x0
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1			0x220 0x684 0x000 0x2 0x0
+#define MX35_PAD_D3_VSYNC__GPIO1_2				0x220 0x684 0x848 0x5 0x1
+#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD			0x220 0x684 0x000 0x6 0x0
+#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19			0x220 0x684 0x000 0x7 0x0
+#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV			0x224 0x688 0x000 0x0 0x0
+#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS			0x224 0x688 0x000 0x2 0x0
+#define MX35_PAD_D3_REV__GPIO1_3				0x224 0x688 0x84c 0x5 0x1
+#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB			0x224 0x688 0x000 0x6 0x0
+#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20			0x224 0x688 0x000 0x7 0x0
+#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS			0x228 0x68c 0x000 0x0 0x0
+#define MX35_PAD_D3_CLS__IPU_DISPB_CS2				0x228 0x68c 0x000 0x2 0x0
+#define MX35_PAD_D3_CLS__GPIO1_4				0x228 0x68c 0x850 0x5 0x2
+#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0		0x228 0x68c 0x000 0x6 0x0
+#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21			0x228 0x68c 0x000 0x7 0x0
+#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL			0x22c 0x690 0x000 0x0 0x0
+#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC			0x22c 0x690 0x928 0x2 0x2
+#define MX35_PAD_D3_SPL__GPIO1_5				0x22c 0x690 0x854 0x5 0x2
+#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1		0x22c 0x690 0x000 0x6 0x0
+#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22			0x22c 0x690 0x000 0x7 0x0
+#define MX35_PAD_SD1_CMD__ESDHC1_CMD				0x230 0x694 0x000 0x0 0x0
+#define MX35_PAD_SD1_CMD__MSHC_SCLK				0x230 0x694 0x000 0x1 0x0
+#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC			0x230 0x694 0x924 0x3 0x2
+#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4			0x230 0x694 0x9b4 0x4 0x0
+#define MX35_PAD_SD1_CMD__GPIO1_6				0x230 0x694 0x858 0x5 0x2
+#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL			0x230 0x694 0x000 0x7 0x0
+#define MX35_PAD_SD1_CLK__ESDHC1_CLK				0x234 0x698 0x000 0x0 0x0
+#define MX35_PAD_SD1_CLK__MSHC_BS				0x234 0x698 0x000 0x1 0x0
+#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK			0x234 0x698 0x000 0x3 0x0
+#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5			0x234 0x698 0x9b8 0x4 0x0
+#define MX35_PAD_SD1_CLK__GPIO1_7				0x234 0x698 0x85c 0x5 0x2
+#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK			0x234 0x698 0x000 0x7 0x0
+#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0				0x238 0x69c 0x000 0x0 0x0
+#define MX35_PAD_SD1_DATA0__MSHC_DATA_0				0x238 0x69c 0x000 0x1 0x0
+#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0			0x238 0x69c 0x000 0x3 0x0
+#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6		0x238 0x69c 0x9bc 0x4 0x0
+#define MX35_PAD_SD1_DATA0__GPIO1_8				0x238 0x69c 0x860 0x5 0x2
+#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23			0x238 0x69c 0x000 0x7 0x0
+#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1				0x23c 0x6a0 0x000 0x0 0x0
+#define MX35_PAD_SD1_DATA1__MSHC_DATA_1				0x23c 0x6a0 0x000 0x1 0x0
+#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS			0x23c 0x6a0 0x000 0x3 0x0
+#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0		0x23c 0x6a0 0x9a4 0x4 0x0
+#define MX35_PAD_SD1_DATA1__GPIO1_9				0x23c 0x6a0 0x864 0x5 0x1
+#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24			0x23c 0x6a0 0x000 0x7 0x0
+#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2				0x240 0x6a4 0x000 0x0 0x0
+#define MX35_PAD_SD1_DATA2__MSHC_DATA_2				0x240 0x6a4 0x000 0x1 0x0
+#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR			0x240 0x6a4 0x000 0x3 0x0
+#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1		0x240 0x6a4 0x9a8 0x4 0x0
+#define MX35_PAD_SD1_DATA2__GPIO1_10				0x240 0x6a4 0x830 0x5 0x1
+#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25			0x240 0x6a4 0x000 0x7 0x0
+#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3				0x244 0x6a8 0x000 0x0 0x0
+#define MX35_PAD_SD1_DATA3__MSHC_DATA_3				0x244 0x6a8 0x000 0x1 0x0
+#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD			0x244 0x6a8 0x000 0x3 0x0
+#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2		0x244 0x6a8 0x9ac 0x4 0x0
+#define MX35_PAD_SD1_DATA3__GPIO1_11				0x244 0x6a8 0x834 0x5 0x1
+#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26			0x244 0x6a8 0x000 0x7 0x0
+#define MX35_PAD_SD2_CMD__ESDHC2_CMD				0x248 0x6ac 0x000 0x0 0x0
+#define MX35_PAD_SD2_CMD__I2C3_SCL				0x248 0x6ac 0x91c 0x1 0x2
+#define MX35_PAD_SD2_CMD__ESDHC1_DAT4				0x248 0x6ac 0x804 0x2 0x0
+#define MX35_PAD_SD2_CMD__IPU_CSI_D_2				0x248 0x6ac 0x938 0x3 0x2
+#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4			0x248 0x6ac 0x9dc 0x4 0x0
+#define MX35_PAD_SD2_CMD__GPIO2_0				0x248 0x6ac 0x868 0x5 0x2
+#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1			0x248 0x6ac 0x000 0x6 0x0
+#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC			0x248 0x6ac 0x928 0x7 0x3
+#define MX35_PAD_SD2_CLK__ESDHC2_CLK				0x24c 0x6b0 0x000 0x0 0x0
+#define MX35_PAD_SD2_CLK__I2C3_SDA				0x24c 0x6b0 0x920 0x1 0x2
+#define MX35_PAD_SD2_CLK__ESDHC1_DAT5				0x24c 0x6b0 0x808 0x2 0x0
+#define MX35_PAD_SD2_CLK__IPU_CSI_D_3				0x24c 0x6b0 0x93c 0x3 0x2
+#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5			0x24c 0x6b0 0x9e0 0x4 0x0
+#define MX35_PAD_SD2_CLK__GPIO2_1				0x24c 0x6b0 0x894 0x5 0x1
+#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1			0x24c 0x6b0 0x998 0x6 0x2
+#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2				0x24c 0x6b0 0x000 0x7 0x0
+#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0				0x250 0x6b4 0x000 0x0 0x0
+#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX			0x250 0x6b4 0x9a0 0x1 0x1
+#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6				0x250 0x6b4 0x80c 0x2 0x0
+#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4				0x250 0x6b4 0x940 0x3 0x1
+#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6		0x250 0x6b4 0x9e4 0x4 0x0
+#define MX35_PAD_SD2_DATA0__GPIO2_2				0x250 0x6b4 0x8c0 0x5 0x1
+#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK			0x250 0x6b4 0x994 0x6 0x3
+#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1				0x254 0x6b8 0x000 0x0 0x0
+#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX			0x254 0x6b8 0x000 0x1 0x0
+#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7				0x254 0x6b8 0x810 0x2 0x0
+#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5				0x254 0x6b8 0x944 0x3 0x1
+#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0		0x254 0x6b8 0x9cc 0x4 0x0
+#define MX35_PAD_SD2_DATA1__GPIO2_3				0x254 0x6b8 0x8cc 0x5 0x1
+#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2				0x258 0x6bc 0x000 0x0 0x0
+#define MX35_PAD_SD2_DATA2__UART3_RTS				0x258 0x6bc 0x99c 0x1 0x0
+#define MX35_PAD_SD2_DATA2__CAN1_RXCAN				0x258 0x6bc 0x7c8 0x2 0x1
+#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6				0x258 0x6bc 0x948 0x3 0x1
+#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1		0x258 0x6bc 0x9d0 0x4 0x0
+#define MX35_PAD_SD2_DATA2__GPIO2_4				0x258 0x6bc 0x8d0 0x5 0x1
+#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3				0x25c 0x6c0 0x000 0x0 0x0
+#define MX35_PAD_SD2_DATA3__UART3_CTS				0x25c 0x6c0 0x000 0x1 0x0
+#define MX35_PAD_SD2_DATA3__CAN1_TXCAN				0x25c 0x6c0 0x000 0x2 0x0
+#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7				0x25c 0x6c0 0x94c 0x3 0x1
+#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2		0x25c 0x6c0 0x9d4 0x4 0x0
+#define MX35_PAD_SD2_DATA3__GPIO2_5				0x25c 0x6c0 0x8d4 0x5 0x1
+#define MX35_PAD_ATA_CS0__ATA_CS0				0x260 0x6c4 0x000 0x0 0x0
+#define MX35_PAD_ATA_CS0__CSPI1_SS3				0x260 0x6c4 0x7dc 0x1 0x1
+#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1				0x260 0x6c4 0x000 0x3 0x0
+#define MX35_PAD_ATA_CS0__GPIO2_6				0x260 0x6c4 0x8d8 0x5 0x1
+#define MX35_PAD_ATA_CS0__IPU_DIAGB_0				0x260 0x6c4 0x000 0x6 0x0
+#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0		0x260 0x6c4 0x000 0x7 0x0
+#define MX35_PAD_ATA_CS1__ATA_CS1				0x264 0x6c8 0x000 0x0 0x0
+#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2				0x264 0x6c8 0x000 0x3 0x0
+#define MX35_PAD_ATA_CS1__CSPI2_SS0				0x264 0x6c8 0x7f0 0x4 0x1
+#define MX35_PAD_ATA_CS1__GPIO2_7				0x264 0x6c8 0x8dc 0x5 0x1
+#define MX35_PAD_ATA_CS1__IPU_DIAGB_1				0x264 0x6c8 0x000 0x6 0x0
+#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1		0x264 0x6c8 0x000 0x7 0x0
+#define MX35_PAD_ATA_DIOR__ATA_DIOR				0x268 0x6cc 0x000 0x0 0x0
+#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0				0x268 0x6cc 0x81c 0x1 0x1
+#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR			0x268 0x6cc 0x9c4 0x2 0x1
+#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0			0x268 0x6cc 0x000 0x3 0x0
+#define MX35_PAD_ATA_DIOR__CSPI2_SS1				0x268 0x6cc 0x7f4 0x4 0x1
+#define MX35_PAD_ATA_DIOR__GPIO2_8				0x268 0x6cc 0x8e0 0x5 0x1
+#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2				0x268 0x6cc 0x000 0x6 0x0
+#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2		0x268 0x6cc 0x000 0x7 0x0
+#define MX35_PAD_ATA_DIOW__ATA_DIOW				0x26c 0x6d0 0x000 0x0 0x0
+#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1				0x26c 0x6d0 0x820 0x1 0x1
+#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP			0x26c 0x6d0 0x000 0x2 0x0
+#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1			0x26c 0x6d0 0x000 0x3 0x0
+#define MX35_PAD_ATA_DIOW__CSPI2_MOSI				0x26c 0x6d0 0x7ec 0x4 0x2
+#define MX35_PAD_ATA_DIOW__GPIO2_9				0x26c 0x6d0 0x8e4 0x5 0x1
+#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3				0x26c 0x6d0 0x000 0x6 0x0
+#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3		0x26c 0x6d0 0x000 0x7 0x0
+#define MX35_PAD_ATA_DMACK__ATA_DMACK				0x270 0x6d4 0x000 0x0 0x0
+#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2				0x270 0x6d4 0x824 0x1 0x1
+#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT			0x270 0x6d4 0x9c8 0x2 0x1
+#define MX35_PAD_ATA_DMACK__CSPI2_MISO				0x270 0x6d4 0x7e8 0x4 0x2
+#define MX35_PAD_ATA_DMACK__GPIO2_10				0x270 0x6d4 0x86c 0x5 0x1
+#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4				0x270 0x6d4 0x000 0x6 0x0
+#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0		0x270 0x6d4 0x000 0x7 0x0
+#define MX35_PAD_ATA_RESET_B__ATA_RESET_B			0x274 0x6d8 0x000 0x0 0x0
+#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3			0x274 0x6d8 0x828 0x1 0x1
+#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0		0x274 0x6d8 0x9a4 0x2 0x1
+#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O			0x274 0x6d8 0x000 0x3 0x0
+#define MX35_PAD_ATA_RESET_B__CSPI2_RDY				0x274 0x6d8 0x7e4 0x4 0x2
+#define MX35_PAD_ATA_RESET_B__GPIO2_11				0x274 0x6d8 0x870 0x5 0x1
+#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5			0x274 0x6d8 0x000 0x6 0x0
+#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1		0x274 0x6d8 0x000 0x7 0x0
+#define MX35_PAD_ATA_IORDY__ATA_IORDY				0x278 0x6dc 0x000 0x0 0x0
+#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4				0x278 0x6dc 0x000 0x1 0x0
+#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1		0x278 0x6dc 0x9a8 0x2 0x1
+#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO			0x278 0x6dc 0x92c 0x3 0x3
+#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4				0x278 0x6dc 0x000 0x4 0x0
+#define MX35_PAD_ATA_IORDY__GPIO2_12				0x278 0x6dc 0x874 0x5 0x1
+#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6				0x278 0x6dc 0x000 0x6 0x0
+#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2		0x278 0x6dc 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA0__ATA_DATA_0				0x27c 0x6e0 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5				0x27c 0x6e0 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2		0x27c 0x6e0 0x9ac 0x2 0x1
+#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC			0x27c 0x6e0 0x928 0x3 0x4
+#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5				0x27c 0x6e0 0x000 0x4 0x0
+#define MX35_PAD_ATA_DATA0__GPIO2_13				0x27c 0x6e0 0x878 0x5 0x1
+#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7				0x27c 0x6e0 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3		0x27c 0x6e0 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA1__ATA_DATA_1				0x280 0x6e4 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6				0x280 0x6e4 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3		0x280 0x6e4 0x9b0 0x2 0x1
+#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK			0x280 0x6e4 0x000 0x3 0x0
+#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6				0x280 0x6e4 0x000 0x4 0x0
+#define MX35_PAD_ATA_DATA1__GPIO2_14				0x280 0x6e4 0x87c 0x5 0x1
+#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8				0x280 0x6e4 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27			0x280 0x6e4 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA2__ATA_DATA_2				0x284 0x6e8 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7				0x284 0x6e8 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4		0x284 0x6e8 0x9b4 0x2 0x1
+#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS			0x284 0x6e8 0x000 0x3 0x0
+#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7				0x284 0x6e8 0x000 0x4 0x0
+#define MX35_PAD_ATA_DATA2__GPIO2_15				0x284 0x6e8 0x880 0x5 0x1
+#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9				0x284 0x6e8 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28			0x284 0x6e8 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA3__ATA_DATA_3				0x288 0x6ec 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA3__ESDHC3_CLK				0x288 0x6ec 0x814 0x1 0x1
+#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		0x288 0x6ec 0x9b8 0x2 0x1
+#define MX35_PAD_ATA_DATA3__CSPI2_SCLK				0x288 0x6ec 0x7e0 0x4 0x2
+#define MX35_PAD_ATA_DATA3__GPIO2_16				0x288 0x6ec 0x884 0x5 0x1
+#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10			0x288 0x6ec 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			0x288 0x6ec 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA4__ATA_DATA_4				0x28c 0x6f0 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA4__ESDHC3_CMD				0x28c 0x6f0 0x818 0x1 0x1
+#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6		0x28c 0x6f0 0x9bc 0x2 0x1
+#define MX35_PAD_ATA_DATA4__GPIO2_17				0x28c 0x6f0 0x888 0x5 0x1
+#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11			0x28c 0x6f0 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30			0x28c 0x6f0 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA5__ATA_DATA_5				0x290 0x6f4 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7		0x290 0x6f4 0x9c0 0x2 0x1
+#define MX35_PAD_ATA_DATA5__GPIO2_18				0x290 0x6f4 0x88c 0x5 0x1
+#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12			0x290 0x6f4 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31			0x290 0x6f4 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA6__ATA_DATA_6				0x294 0x6f8 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA6__CAN1_TXCAN				0x294 0x6f8 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA6__UART1_DTR				0x294 0x6f8 0x000 0x2 0x0
+#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD			0x294 0x6f8 0x7b4 0x3 0x0
+#define MX35_PAD_ATA_DATA6__GPIO2_19				0x294 0x6f8 0x890 0x5 0x1
+#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13			0x294 0x6f8 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA7__ATA_DATA_7				0x298 0x6fc 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA7__CAN1_RXCAN				0x298 0x6fc 0x7c8 0x1 0x2
+#define MX35_PAD_ATA_DATA7__UART1_DSR				0x298 0x6fc 0x000 0x2 0x0
+#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD			0x298 0x6fc 0x7b0 0x3 0x0
+#define MX35_PAD_ATA_DATA7__GPIO2_20				0x298 0x6fc 0x898 0x5 0x1
+#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14			0x298 0x6fc 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA8__ATA_DATA_8				0x29c 0x700 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA8__UART3_RTS				0x29c 0x700 0x99c 0x1 0x1
+#define MX35_PAD_ATA_DATA8__UART1_RI				0x29c 0x700 0x000 0x2 0x0
+#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC			0x29c 0x700 0x7c0 0x3 0x0
+#define MX35_PAD_ATA_DATA8__GPIO2_21				0x29c 0x700 0x89c 0x5 0x1
+#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15			0x29c 0x700 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA9__ATA_DATA_9				0x2a0 0x704 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA9__UART3_CTS				0x2a0 0x704 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA9__UART1_DCD				0x2a0 0x704 0x000 0x2 0x0
+#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS			0x2a0 0x704 0x7c4 0x3 0x0
+#define MX35_PAD_ATA_DATA9__GPIO2_22				0x2a0 0x704 0x8a0 0x5 0x1
+#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16			0x2a0 0x704 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA10__ATA_DATA_10			0x2a4 0x708 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX			0x2a4 0x708 0x9a0 0x1 0x2
+#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC			0x2a4 0x708 0x7b8 0x3 0x0
+#define MX35_PAD_ATA_DATA10__GPIO2_23				0x2a4 0x708 0x8a4 0x5 0x1
+#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17			0x2a4 0x708 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA11__ATA_DATA_11			0x2a8 0x70c 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX			0x2a8 0x70c 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS			0x2a8 0x70c 0x7bc 0x3 0x0
+#define MX35_PAD_ATA_DATA11__GPIO2_24				0x2a8 0x70c 0x8a8 0x5 0x1
+#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18			0x2a8 0x70c 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA12__ATA_DATA_12			0x2ac 0x710 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA12__I2C3_SCL				0x2ac 0x710 0x91c 0x1 0x3
+#define MX35_PAD_ATA_DATA12__GPIO2_25				0x2ac 0x710 0x8ac 0x5 0x1
+#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19			0x2ac 0x710 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA13__ATA_DATA_13			0x2b0 0x714 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA13__I2C3_SDA				0x2b0 0x714 0x920 0x1 0x3
+#define MX35_PAD_ATA_DATA13__GPIO2_26				0x2b0 0x714 0x8b0 0x5 0x1
+#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20			0x2b0 0x714 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA14__ATA_DATA_14			0x2b4 0x718 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0			0x2b4 0x718 0x930 0x1 0x2
+#define MX35_PAD_ATA_DATA14__KPP_ROW_0				0x2b4 0x718 0x970 0x3 0x2
+#define MX35_PAD_ATA_DATA14__GPIO2_27				0x2b4 0x718 0x8b4 0x5 0x1
+#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21			0x2b4 0x718 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA15__ATA_DATA_15			0x2b8 0x71c 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1			0x2b8 0x71c 0x934 0x1 0x2
+#define MX35_PAD_ATA_DATA15__KPP_ROW_1				0x2b8 0x71c 0x974 0x3 0x2
+#define MX35_PAD_ATA_DATA15__GPIO2_28				0x2b8 0x71c 0x8b8 0x5 0x1
+#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22			0x2b8 0x71c 0x000 0x6 0x0
+#define MX35_PAD_ATA_INTRQ__ATA_INTRQ				0x2bc 0x720 0x000 0x0 0x0
+#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2				0x2bc 0x720 0x938 0x1 0x3
+#define MX35_PAD_ATA_INTRQ__KPP_ROW_2				0x2bc 0x720 0x978 0x3 0x2
+#define MX35_PAD_ATA_INTRQ__GPIO2_29				0x2bc 0x720 0x8bc 0x5 0x1
+#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23			0x2bc 0x720 0x000 0x6 0x0
+#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN			0x2c0 0x724 0x000 0x0 0x0
+#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3			0x2c0 0x724 0x93c 0x1 0x3
+#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3				0x2c0 0x724 0x97c 0x3 0x2
+#define MX35_PAD_ATA_BUFF_EN__GPIO2_30				0x2c0 0x724 0x8c4 0x5 0x1
+#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24			0x2c0 0x724 0x000 0x6 0x0
+#define MX35_PAD_ATA_DMARQ__ATA_DMARQ				0x2c4 0x728 0x000 0x0 0x0
+#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4				0x2c4 0x728 0x940 0x1 0x2
+#define MX35_PAD_ATA_DMARQ__KPP_COL_0				0x2c4 0x728 0x950 0x3 0x2
+#define MX35_PAD_ATA_DMARQ__GPIO2_31				0x2c4 0x728 0x8c8 0x5 0x1
+#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25			0x2c4 0x728 0x000 0x6 0x0
+#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4			0x2c4 0x728 0x000 0x7 0x0
+#define MX35_PAD_ATA_DA0__ATA_DA_0				0x2c8 0x72c 0x000 0x0 0x0
+#define MX35_PAD_ATA_DA0__IPU_CSI_D_5				0x2c8 0x72c 0x944 0x1 0x2
+#define MX35_PAD_ATA_DA0__KPP_COL_1				0x2c8 0x72c 0x954 0x3 0x2
+#define MX35_PAD_ATA_DA0__GPIO3_0				0x2c8 0x72c 0x8e8 0x5 0x1
+#define MX35_PAD_ATA_DA0__IPU_DIAGB_26				0x2c8 0x72c 0x000 0x6 0x0
+#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5			0x2c8 0x72c 0x000 0x7 0x0
+#define MX35_PAD_ATA_DA1__ATA_DA_1				0x2cc 0x730 0x000 0x0 0x0
+#define MX35_PAD_ATA_DA1__IPU_CSI_D_6				0x2cc 0x730 0x948 0x1 0x2
+#define MX35_PAD_ATA_DA1__KPP_COL_2				0x2cc 0x730 0x958 0x3 0x2
+#define MX35_PAD_ATA_DA1__GPIO3_1				0x2cc 0x730 0x000 0x5 0x0
+#define MX35_PAD_ATA_DA1__IPU_DIAGB_27				0x2cc 0x730 0x000 0x6 0x0
+#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6			0x2cc 0x730 0x000 0x7 0x0
+#define MX35_PAD_ATA_DA2__ATA_DA_2				0x2d0 0x734 0x000 0x0 0x0
+#define MX35_PAD_ATA_DA2__IPU_CSI_D_7				0x2d0 0x734 0x94c 0x1 0x2
+#define MX35_PAD_ATA_DA2__KPP_COL_3				0x2d0 0x734 0x95c 0x3 0x2
+#define MX35_PAD_ATA_DA2__GPIO3_2				0x2d0 0x734 0x000 0x5 0x0
+#define MX35_PAD_ATA_DA2__IPU_DIAGB_28				0x2d0 0x734 0x000 0x6 0x0
+#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7			0x2d0 0x734 0x000 0x7 0x0
+#define MX35_PAD_MLB_CLK__MLB_MLBCLK				0x2d4 0x738 0x000 0x0 0x0
+#define MX35_PAD_MLB_CLK__GPIO3_3				0x2d4 0x738 0x000 0x5 0x0
+#define MX35_PAD_MLB_DAT__MLB_MLBDAT				0x2d8 0x73c 0x000 0x0 0x0
+#define MX35_PAD_MLB_DAT__GPIO3_4				0x2d8 0x73c 0x904 0x5 0x1
+#define MX35_PAD_MLB_SIG__MLB_MLBSIG				0x2dc 0x740 0x000 0x0 0x0
+#define MX35_PAD_MLB_SIG__GPIO3_5				0x2dc 0x740 0x908 0x5 0x1
+#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK				0x2e0 0x744 0x000 0x0 0x0
+#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4			0x2e0 0x744 0x804 0x1 0x1
+#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX			0x2e0 0x744 0x9a0 0x2 0x3
+#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR			0x2e0 0x744 0x9ec 0x3 0x1
+#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI				0x2e0 0x744 0x7ec 0x4 0x3
+#define MX35_PAD_FEC_TX_CLK__GPIO3_6				0x2e0 0x744 0x90c 0x5 0x1
+#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC		0x2e0 0x744 0x928 0x6 0x5
+#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0		0x2e0 0x744 0x000 0x7 0x0
+#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK				0x2e4 0x748 0x000 0x0 0x0
+#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5			0x2e4 0x748 0x808 0x1 0x1
+#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX			0x2e4 0x748 0x000 0x2 0x0
+#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP			0x2e4 0x748 0x000 0x3 0x0
+#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO				0x2e4 0x748 0x7e8 0x4 0x3
+#define MX35_PAD_FEC_RX_CLK__GPIO3_7				0x2e4 0x748 0x910 0x5 0x1
+#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I			0x2e4 0x748 0x92c 0x6 0x4
+#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1		0x2e4 0x748 0x000 0x7 0x0
+#define MX35_PAD_FEC_RX_DV__FEC_RX_DV				0x2e8 0x74c 0x000 0x0 0x0
+#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6				0x2e8 0x74c 0x80c 0x1 0x1
+#define MX35_PAD_FEC_RX_DV__UART3_RTS				0x2e8 0x74c 0x99c 0x2 0x2
+#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT			0x2e8 0x74c 0x9f0 0x3 0x1
+#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK				0x2e8 0x74c 0x7e0 0x4 0x3
+#define MX35_PAD_FEC_RX_DV__GPIO3_8				0x2e8 0x74c 0x914 0x5 0x1
+#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK			0x2e8 0x74c 0x000 0x6 0x0
+#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2		0x2e8 0x74c 0x000 0x7 0x0
+#define MX35_PAD_FEC_COL__FEC_COL				0x2ec 0x750 0x000 0x0 0x0
+#define MX35_PAD_FEC_COL__ESDHC1_DAT7				0x2ec 0x750 0x810 0x1 0x1
+#define MX35_PAD_FEC_COL__UART3_CTS				0x2ec 0x750 0x000 0x2 0x0
+#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0			0x2ec 0x750 0x9cc 0x3 0x1
+#define MX35_PAD_FEC_COL__CSPI2_RDY				0x2ec 0x750 0x7e4 0x4 0x3
+#define MX35_PAD_FEC_COL__GPIO3_9				0x2ec 0x750 0x918 0x5 0x1
+#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS			0x2ec 0x750 0x000 0x6 0x0
+#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3			0x2ec 0x750 0x000 0x7 0x0
+#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0			0x2f0 0x754 0x000 0x0 0x0
+#define MX35_PAD_FEC_RDATA0__PWM_PWMO				0x2f0 0x754 0x000 0x1 0x0
+#define MX35_PAD_FEC_RDATA0__UART3_DTR				0x2f0 0x754 0x000 0x2 0x0
+#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1		0x2f0 0x754 0x9d0 0x3 0x1
+#define MX35_PAD_FEC_RDATA0__CSPI2_SS0				0x2f0 0x754 0x7f0 0x4 0x2
+#define MX35_PAD_FEC_RDATA0__GPIO3_10				0x2f0 0x754 0x8ec 0x5 0x1
+#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1			0x2f0 0x754 0x000 0x6 0x0
+#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4		0x2f0 0x754 0x000 0x7 0x0
+#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0			0x2f4 0x758 0x000 0x0 0x0
+#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1			0x2f4 0x758 0x000 0x1 0x0
+#define MX35_PAD_FEC_TDATA0__UART3_DSR				0x2f4 0x758 0x000 0x2 0x0
+#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2		0x2f4 0x758 0x9d4 0x3 0x1
+#define MX35_PAD_FEC_TDATA0__CSPI2_SS1				0x2f4 0x758 0x7f4 0x4 0x2
+#define MX35_PAD_FEC_TDATA0__GPIO3_11				0x2f4 0x758 0x8f0 0x5 0x1
+#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0			0x2f4 0x758 0x000 0x6 0x0
+#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5		0x2f4 0x758 0x000 0x7 0x0
+#define MX35_PAD_FEC_TX_EN__FEC_TX_EN				0x2f8 0x75c 0x000 0x0 0x0
+#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1			0x2f8 0x75c 0x998 0x1 0x3
+#define MX35_PAD_FEC_TX_EN__UART3_RI				0x2f8 0x75c 0x000 0x2 0x0
+#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3		0x2f8 0x75c 0x9d8 0x3 0x1
+#define MX35_PAD_FEC_TX_EN__GPIO3_12				0x2f8 0x75c 0x8f4 0x5 0x1
+#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS			0x2f8 0x75c 0x000 0x6 0x0
+#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6		0x2f8 0x75c 0x000 0x7 0x0
+#define MX35_PAD_FEC_MDC__FEC_MDC				0x2fc 0x760 0x000 0x0 0x0
+#define MX35_PAD_FEC_MDC__CAN2_TXCAN				0x2fc 0x760 0x000 0x1 0x0
+#define MX35_PAD_FEC_MDC__UART3_DCD				0x2fc 0x760 0x000 0x2 0x0
+#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4			0x2fc 0x760 0x9dc 0x3 0x1
+#define MX35_PAD_FEC_MDC__GPIO3_13				0x2fc 0x760 0x8f8 0x5 0x1
+#define MX35_PAD_FEC_MDC__IPU_DISPB_WR				0x2fc 0x760 0x000 0x6 0x0
+#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7			0x2fc 0x760 0x000 0x7 0x0
+#define MX35_PAD_FEC_MDIO__FEC_MDIO				0x300 0x764 0x000 0x0 0x0
+#define MX35_PAD_FEC_MDIO__CAN2_RXCAN				0x300 0x764 0x7cc 0x1 0x2
+#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5			0x300 0x764 0x9e0 0x3 0x1
+#define MX35_PAD_FEC_MDIO__GPIO3_14				0x300 0x764 0x8fc 0x5 0x1
+#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD				0x300 0x764 0x000 0x6 0x0
+#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8			0x300 0x764 0x000 0x7 0x0
+#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR				0x304 0x768 0x000 0x0 0x0
+#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE				0x304 0x768 0x990 0x1 0x2
+#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK			0x304 0x768 0x994 0x2 0x4
+#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6		0x304 0x768 0x9e4 0x3 0x1
+#define MX35_PAD_FEC_TX_ERR__GPIO3_15				0x304 0x768 0x900 0x5 0x1
+#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC			0x304 0x768 0x924 0x6 0x3
+#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9		0x304 0x768 0x000 0x7 0x0
+#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR				0x308 0x76c 0x000 0x0 0x0
+#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0			0x308 0x76c 0x930 0x1 0x3
+#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7		0x308 0x76c 0x9e8 0x3 0x1
+#define MX35_PAD_FEC_RX_ERR__KPP_COL_4				0x308 0x76c 0x960 0x4 0x1
+#define MX35_PAD_FEC_RX_ERR__GPIO3_16				0x308 0x76c 0x000 0x5 0x0
+#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO			0x308 0x76c 0x92c 0x6 0x5
+#define MX35_PAD_FEC_CRS__FEC_CRS				0x30c 0x770 0x000 0x0 0x0
+#define MX35_PAD_FEC_CRS__IPU_CSI_D_1				0x30c 0x770 0x934 0x1 0x3
+#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR			0x30c 0x770 0x000 0x3 0x0
+#define MX35_PAD_FEC_CRS__KPP_COL_5				0x30c 0x770 0x964 0x4 0x1
+#define MX35_PAD_FEC_CRS__GPIO3_17				0x30c 0x770 0x000 0x5 0x0
+#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE			0x30c 0x770 0x000 0x6 0x0
+#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1			0x310 0x774 0x000 0x0 0x0
+#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2			0x310 0x774 0x938 0x1 0x4
+#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC			0x310 0x774 0x000 0x2 0x0
+#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC			0x310 0x774 0x9f4 0x3 0x2
+#define MX35_PAD_FEC_RDATA1__KPP_COL_6				0x310 0x774 0x968 0x4 0x1
+#define MX35_PAD_FEC_RDATA1__GPIO3_18				0x310 0x774 0x000 0x5 0x0
+#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0			0x310 0x774 0x000 0x6 0x0
+#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1			0x314 0x778 0x000 0x0 0x0
+#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3			0x314 0x778 0x93c 0x1 0x4
+#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS			0x314 0x778 0x7bc 0x2 0x1
+#define MX35_PAD_FEC_TDATA1__KPP_COL_7				0x314 0x778 0x96c 0x4 0x1
+#define MX35_PAD_FEC_TDATA1__GPIO3_19				0x314 0x778 0x000 0x5 0x0
+#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1			0x314 0x778 0x000 0x6 0x0
+#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2			0x318 0x77c 0x000 0x0 0x0
+#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4			0x318 0x77c 0x940 0x1 0x3
+#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD			0x318 0x77c 0x7b4 0x2 0x1
+#define MX35_PAD_FEC_RDATA2__KPP_ROW_4				0x318 0x77c 0x980 0x4 0x1
+#define MX35_PAD_FEC_RDATA2__GPIO3_20				0x318 0x77c 0x000 0x5 0x0
+#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2			0x31c 0x780 0x000 0x0 0x0
+#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5			0x31c 0x780 0x944 0x1 0x3
+#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD			0x31c 0x780 0x7b0 0x2 0x1
+#define MX35_PAD_FEC_TDATA2__KPP_ROW_5				0x31c 0x780 0x984 0x4 0x1
+#define MX35_PAD_FEC_TDATA2__GPIO3_21				0x31c 0x780 0x000 0x5 0x0
+#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3			0x320 0x784 0x000 0x0 0x0
+#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6			0x320 0x784 0x948 0x1 0x3
+#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC			0x320 0x784 0x7c0 0x2 0x1
+#define MX35_PAD_FEC_RDATA3__KPP_ROW_6				0x320 0x784 0x988 0x4 0x1
+#define MX35_PAD_FEC_RDATA3__GPIO3_22				0x320 0x784 0x000 0x6 0x0
+#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3			0x324 0x788 0x000 0x0 0x0
+#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7			0x324 0x788 0x94c 0x1 0x3
+#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS			0x324 0x788 0x7c4 0x2 0x1
+#define MX35_PAD_FEC_TDATA3__KPP_ROW_7				0x324 0x788 0x98c 0x4 0x1
+#define MX35_PAD_FEC_TDATA3__GPIO3_23				0x324 0x788 0x000 0x5 0x0
+#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK			0x000 0x78c 0x000 0x0 0x0
+#define MX35_PAD_TEST_MODE__TCU_TEST_MODE			0x000 0x790 0x000 0x0 0x0
+
+#endif /* __DTS_IMX35_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
new file mode 100644
index 0000000000000..2d20e5541acc8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2012 Steffen Trumtrar, Pengutronix
+//
+// based on imx27.dtsi
+
+#include "imx35-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm1136jf-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	avic: avic-interrupt-controller@68000000 {
+		compatible = "fsl,imx35-avic", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x68000000 0x10000000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&avic>;
+		ranges;
+
+		L2: cache-controller@30000000 {
+			compatible = "arm,l210-cache";
+			reg = <0x30000000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		aips1: bus@43f00000 {
+			compatible = "fsl,aips", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x43f00000 0x100000>;
+			ranges;
+
+			i2c1: i2c@43f80000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f80000 0x4000>;
+				clocks = <&clks 51>;
+				clock-names = "ipg_per";
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f84000 0x4000>;
+				clocks = <&clks 53>;
+				clock-names = "ipg_per";
+				interrupts = <3>;
+				status = "disabled";
+			};
+
+			uart1: serial@43f90000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x43f90000 0x4000>;
+				clocks = <&clks 9>, <&clks 70>;
+				clock-names = "ipg", "per";
+				interrupts = <45>;
+				status = "disabled";
+			};
+
+			uart2: serial@43f94000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x43f94000 0x4000>;
+				clocks = <&clks 9>, <&clks 71>;
+				clock-names = "ipg", "per";
+				interrupts = <32>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@43f98000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f98000 0x4000>;
+				clocks = <&clks 52>;
+				clock-names = "ipg_per";
+				interrupts = <4>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@43fa0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
+				reg = <0x43fa0000 0x4000>;
+				interrupts = <11>;
+				clocks = <&clks 68>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			spi1: spi@43fa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-cspi";
+				reg = <0x43fa4000 0x4000>;
+				clocks = <&clks 35 &clks 35>;
+				clock-names = "ipg", "per";
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			kpp: kpp@43fa8000 {
+				compatible = "fsl,imx35-kpp", "fsl,imx21-kpp";
+				reg = <0x43fa8000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks 56>;
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@43fac000 {
+				compatible = "fsl,imx35-iomuxc";
+				reg = <0x43fac000 0x4000>;
+			};
+		};
+
+		spba: spba-bus@50000000 {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x100000>;
+			ranges;
+
+			uart3: serial@5000c000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x5000c000 0x4000>;
+				clocks = <&clks 9>, <&clks 72>;
+				clock-names = "ipg", "per";
+				interrupts = <18>;
+				status = "disabled";
+			};
+
+			spi2: spi@50010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-cspi";
+				reg = <0x50010000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks 36 &clks 36>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			fec: ethernet@50038000 {
+				compatible = "fsl,imx35-fec", "fsl,imx27-fec";
+				reg = <0x50038000 0x4000>;
+				clocks = <&clks 46>, <&clks 8>;
+				clock-names = "ipg", "ahb";
+				interrupts = <57>;
+				status = "disabled";
+			};
+		};
+
+		aips2: bus@53f00000 {
+			compatible = "fsl,aips", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x53f00000 0x100000>;
+			ranges;
+
+			clks: ccm@53f80000 {
+				compatible = "fsl,imx35-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>;
+				#clock-cells = <1>;
+			};
+
+			gpt: timer@53f90000 {
+				compatible = "fsl,imx35-gpt", "fsl,imx31-gpt";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks 9>, <&clks 50>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <56>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			esdhc1: mmc@53fb4000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fb4000 0x4000>;
+				interrupts = <7>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc2: mmc@53fb8000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fb8000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 44>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc3: mmc@53fbc000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 45>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			audmux: audmux@53fc4000 {
+				compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
+				reg = <0x53fc4000 0x4000>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma: dma-controller@53fd4000 {
+				compatible = "fsl,imx35-sdma";
+				reg = <0x53fd4000 0x4000>;
+				clocks = <&clks 9>, <&clks 65>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				interrupts = <34>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
+			};
+
+			wdog: watchdog@53fdc000 {
+				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 74>;
+				interrupts = <55>;
+			};
+
+			can1: can@53fe4000 {
+				compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fe4000 0x1000>;
+				clocks = <&clks 33>, <&clks 33>;
+				clock-names = "ipg", "per";
+				interrupts = <43>;
+				status = "disabled";
+			};
+
+			can2: can@53fe8000 {
+				compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fe8000 0x1000>;
+				clocks = <&clks 34>, <&clks 34>;
+				clock-names = "ipg", "per";
+				interrupts = <44>;
+				status = "disabled";
+			};
+
+			efuse@53ff0000 {
+				compatible = "fsl,imx35-iim";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <19>;
+				clocks = <&clks 80>;
+			};
+
+			usbotg: usb@53ff4000 {
+				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+				reg = <0x53ff4000 0x0200>;
+				interrupts = <37>;
+				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbhost1: usb@53ff4400 {
+				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+				reg = <0x53ff4400 0x0200>;
+				interrupts = <35>;
+				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53ff4600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx35-usbmisc";
+				reg = <0x53ff4600 0x00f>;
+			};
+		};
+
+		emi@80000000 { /* External Memory Interface */
+			compatible = "fsl,emi", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x40000000>;
+			ranges;
+
+			nfc: nand@bb000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
+				reg = <0xbb000000 0x2000>;
+				clocks = <&clks 29>;
+				clock-names = "";
+				interrupts = <33>;
+				status = "disabled";
+			};
+
+			weim: weim@b8002000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clocks = <&clks 0>;
+				compatible = "fsl,imx35-weim", "fsl,imx27-weim";
+				reg = <0xb8002000 0x1000>;
+				ranges = <
+					0 0 0xa0000000 0x8000000
+					1 0 0xa8000000 0x8000000
+					2 0 0xb0000000 0x2000000
+					3 0 0xb2000000 0x2000000
+					4 0 0xb4000000 0x2000000
+					5 0 0xb6000000 0x2000000
+				>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usb-phy@0 {
+			reg = <0>;
+			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
+		};
+
+		usbphy1: usb-phy@1 {
+			reg = <1>;
+			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx50-evk.dts b/arch/arm/boot/dts/nxp/imx/imx50-evk.dts
new file mode 100644
index 0000000000000..4ea5c23f181b4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx50-evk.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include "imx50.dtsi"
+
+/ {
+	model = "Freescale i.MX50 Evaluation Kit";
+	compatible = "fsl,imx50-evk", "fsl,imx50";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x80000000>;
+	};
+};
+
+&cspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi>;
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash: m25p32@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p32", "jedec,spi-nor";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "kernel";
+			reg = <0x100000 0x300000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx50-evk {
+		pinctrl_cspi: cspigrp {
+			fsl,pins = <
+				MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
+				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
+				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
+				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
+				MX50_PAD_ECSPI1_MOSI__GPIO4_13		0x84
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX50_PAD_SSI_RXFS__FEC_MDC		0x80
+				MX50_PAD_SSI_RXC__FEC_MDIO		0x80
+				MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
+				MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
+				MX50_PAD_DISP_D2__FEC_RX_DV		0x80
+				MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
+				MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
+				MX50_PAD_DISP_D5__FEC_TX_EN		0x80
+				MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
+				MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
+				MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
+				MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
+				MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts b/arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts
new file mode 100644
index 0000000000000..467db6b4ed7f8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 Jonathan Neuschäfer
+//
+// The Kobo Aura e-book reader, model N514. The mainboard is marked as E606F0B.
+
+/dts-v1/;
+#include "imx50.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Kobo Aura (N514)";
+	compatible = "kobo,aura", "fsl,imx50";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x10000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-on {
+			label = "kobo_aura:orange:on";
+			gpios = <&gpio6 24 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		event-hallsensor {
+			label = "Hallsensor";
+			gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <EV_SW>;
+		};
+
+		event-frontlight {
+			label = "Frontlight";
+			gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DISPLAYTOGGLE>;
+		};
+	};
+
+	sd2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd2_reset>;
+		reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+	};
+
+	sd2_vmmc: gpio-regulator {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd2_vmmc>;
+		regulator-name = "vmmc";
+		states = <3300000 0>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-gpio = <&gpio4 12 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1>;
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+
+	/* External µSD card */
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2>;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	disable-wp;
+	mmc-pwrseq = <&sd2_pwrseq>;
+	vmmc-supply = <&sd2_vmmc>;
+	status = "okay";
+
+	/* CyberTan WC121 SDIO WiFi (BCM43362) */
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd3>;
+	bus-width = <8>;
+	non-removable;
+	max-frequency = <50000000>;
+	disable-wp;
+	status = "okay";
+
+	/* Internal eMMC */
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@15 {
+		reg = <0x15>;
+		compatible = "elan,ektf2132";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		power-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio5 13 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	embedded-controller@43 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ec>;
+		compatible = "netronix,ntxec";
+		reg = <0x43>;
+		system-power-controller;
+		interrupts-extended = <&gpio4 11 IRQ_TYPE_EDGE_FALLING>;
+		#pwm-cells = <2>;
+	};
+};
+
+&iomuxc {
+	pinctrl_ec: ecgrp {
+		fsl,pins = <
+			MX50_PAD_CSPI_SS0__GPIO4_11		0x0	/* INT */
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeysgrp {
+		fsl,pins = <
+			MX50_PAD_CSPI_MISO__GPIO4_10		0x0
+			MX50_PAD_SD2_D7__GPIO5_15		0x0
+			MX50_PAD_KEY_ROW0__GPIO4_1		0x0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX50_PAD_I2C1_SCL__I2C1_SCL		0x400001fd
+			MX50_PAD_I2C1_SDA__I2C1_SDA		0x400001fd
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX50_PAD_I2C2_SCL__I2C2_SCL		0x400001fd
+			MX50_PAD_I2C2_SDA__I2C2_SDA		0x400001fd
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX50_PAD_I2C3_SCL__I2C3_SCL		0x400001fd
+			MX50_PAD_I2C3_SDA__I2C3_SDA		0x400001fd
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX50_PAD_PWM1__GPIO6_24			0x0
+		>;
+	};
+
+	pinctrl_sd1: sd1grp {
+		fsl,pins = <
+			MX50_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
+			MX50_PAD_SD1_CLK__ESDHC1_CLK		0xd4
+			MX50_PAD_SD1_D0__ESDHC1_DAT0		0x1d4
+			MX50_PAD_SD1_D1__ESDHC1_DAT1		0x1d4
+			MX50_PAD_SD1_D2__ESDHC1_DAT2		0x1d4
+			MX50_PAD_SD1_D3__ESDHC1_DAT3		0x1d4
+
+			MX50_PAD_SD2_CD__GPIO5_17		0x0
+		>;
+	};
+
+	pinctrl_sd2: sd2grp {
+		fsl,pins = <
+			MX50_PAD_SD2_CMD__ESDHC2_CMD		0x1e4
+			MX50_PAD_SD2_CLK__ESDHC2_CLK		0xd4
+			MX50_PAD_SD2_D0__ESDHC2_DAT0		0x1d4
+			MX50_PAD_SD2_D1__ESDHC2_DAT1		0x1d4
+			MX50_PAD_SD2_D2__ESDHC2_DAT2		0x1d4
+			MX50_PAD_SD2_D3__ESDHC2_DAT3		0x1d4
+		>;
+	};
+
+	pinctrl_sd2_reset: sd2-resetgrp {
+		fsl,pins = <
+			MX50_PAD_ECSPI2_MOSI__GPIO4_17		0x0
+		>;
+	};
+
+	pinctrl_sd2_vmmc: sd2-vmmcgrp {
+		fsl,pins = <
+			MX50_PAD_ECSPI1_SCLK__GPIO4_12		0x0
+		>;
+	};
+
+	pinctrl_sd3: sd3grp {
+		fsl,pins = <
+			MX50_PAD_SD3_CMD__ESDHC3_CMD		0x1e4
+			MX50_PAD_SD3_CLK__ESDHC3_CLK		0xd4
+			MX50_PAD_SD3_D0__ESDHC3_DAT0		0x1d4
+			MX50_PAD_SD3_D1__ESDHC3_DAT1		0x1d4
+			MX50_PAD_SD3_D2__ESDHC3_DAT2		0x1d4
+			MX50_PAD_SD3_D3__ESDHC3_DAT3		0x1d4
+			MX50_PAD_SD3_D4__ESDHC3_DAT4		0x1d4
+			MX50_PAD_SD3_D5__ESDHC3_DAT5		0x1d4
+			MX50_PAD_SD3_D6__ESDHC3_DAT6		0x1d4
+			MX50_PAD_SD3_D7__ESDHC3_DAT7		0x1d4
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX50_PAD_CSPI_MOSI__GPIO4_9		0x0
+			MX50_PAD_SD2_D5__GPIO5_13		0x0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX50_PAD_UART2_TXD__UART2_TXD_MUX	0x1e4
+			MX50_PAD_UART2_RXD__UART2_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_usbphy: usbphygrp {
+		fsl,pins = <
+			MX50_PAD_ECSPI2_SS0__GPIO4_19		0x0
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi_wide";
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbphy>;
+	vbus-detect-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx50-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx50-pinfunc.h
new file mode 100644
index 0000000000000..5e6b302475434
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx50-pinfunc.h
@@ -0,0 +1,919 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ */
+
+#ifndef __DTS_IMX50_PINFUNC_H
+#define __DTS_IMX50_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX50_PAD_KEY_COL0__KPP_COL_0				0x020 0x2cc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL0__GPIO4_0				0x020 0x2cc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL0__EIM_NANDF_CLE			0x020 0x2cc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL0__CTI_TRIGIN7				0x020 0x2cc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL0__USBPHY1_TXREADY			0x020 0x2cc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW0__KPP_ROW_0				0x024 0x2d0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW0__GPIO4_1				0x024 0x2d0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE			0x024 0x2d0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7			0x024 0x2d0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID			0x024 0x2d0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL1__KPP_COL_1				0x028 0x2d4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL1__GPIO4_2				0x028 0x2d4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL1__EIM_NANDF_CEN_0			0x028 0x2d4 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL1__CTI_TRIGOUT_ACK6			0x028 0x2d4 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL1__USBPHY1_RXACTIVE			0x028 0x2d4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW1__KPP_ROW_1				0x02c 0x2d8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW1__GPIO4_3				0x02c 0x2d8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1			0x02c 0x2d8 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7			0x02c 0x2d8 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR			0x02c 0x2d8 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL2__KPP_COL_2				0x030 0x2dc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL2__GPIO4_4				0x030 0x2dc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2			0x030 0x2dc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL2__CTI_TRIGOUT6				0x030 0x2dc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL2__USBPHY1_SIECLOCK			0x030 0x2dc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW2__KPP_ROW_2				0x034 0x2e0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW2__GPIO4_5				0x034 0x2e0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3			0x034 0x2e0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7				0x034 0x2e0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0			0x034 0x2e0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL3__KPP_COL_3				0x038 0x2e4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL3__GPIO4_6				0x038 0x2e4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL3__EIM_NANDF_READY0			0x038 0x2e4 0x7b4 0x2 0x0
+#define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0			0x038 0x2e4 0x7b8 0x6 0x0
+#define MX50_PAD_KEY_COL3__USBPHY1_LINESTATE_1			0x038 0x2e4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW3__KPP_ROW_3				0x03c 0x2e8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW3__GPIO4_7				0x03c 0x2e8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW3__EIM_NANDF_DQS			0x03c 0x2e8 0x7b0 0x2 0x0
+#define MX50_PAD_KEY_ROW3__SDMA_EXT_EVENT_1			0x03c 0x2e8 0x7bc 0x6 0x0
+#define MX50_PAD_KEY_ROW3__USBPHY1_VBUSVALID			0x03c 0x2e8 0x000 0x7 0x0
+#define MX50_PAD_I2C1_SCL__I2C1_SCL				0x040 0x2ec 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SCL__GPIO6_18				0x040 0x2ec 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SCL__UART2_TXD_MUX			0x040 0x2ec 0x7cc 0x2 0x0
+#define MX50_PAD_I2C1_SDA__I2C1_SDA				0x044 0x2f0 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SDA__GPIO6_19				0x044 0x2f0 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SDA__UART2_RXD_MUX			0x044 0x2f0 0x7cc 0x2 0x1
+#define MX50_PAD_I2C2_SCL__I2C2_SCL				0x048 0x2f4 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SCL__GPIO6_20				0x048 0x2f4 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SCL__UART2_CTS				0x048 0x2f4 0x000 0x2 0x0
+#define MX50_PAD_I2C2_SDA__I2C2_SDA				0x04c 0x2f8 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SDA__GPIO6_21				0x04c 0x2f8 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SDA__UART2_RTS				0x04c 0x2f8 0x7c8 0x2 0x1
+#define MX50_PAD_I2C3_SCL__I2C3_SCL				0x050 0x2fc 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SCL__GPIO6_22				0x050 0x2fc 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SCL__FEC_MDC				0x050 0x2fc 0x000 0x2 0x0
+#define MX50_PAD_I2C3_SCL__GPC_PMIC_RDY				0x050 0x2fc 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SCL__GPT_CAPIN1				0x050 0x2fc 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SCL__OBSERVE_MUX_OBSRV_INT_OUT0		0x050 0x2fc 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SCL__USBOH1_USBOTG_OC			0x050 0x2fc 0x7e8 0x7 0x0
+#define MX50_PAD_I2C3_SDA__I2C3_SDA				0x054 0x300 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SDA__GPIO6_23				0x054 0x300 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SDA__FEC_MDIO				0x054 0x300 0x774 0x2 0x0
+#define MX50_PAD_I2C3_SDA__TZIC_PWRFAIL_INT			0x054 0x300 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SDA__SRTC_ALARM_DEB			0x054 0x300 0x000 0x4 0x0
+#define MX50_PAD_I2C3_SDA__GPT_CAPIN2				0x054 0x300 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SDA__OBSERVE_MUX_OBSRV_INT_OUT1		0x054 0x300 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SDA__USBOH1_USBOTG_PWR			0x054 0x300 0x000 0x7 0x0
+#define MX50_PAD_PWM1__PWM1_PWMO				0x058 0x304 0x000 0x0 0x0
+#define MX50_PAD_PWM1__GPIO6_24					0x058 0x304 0x000 0x1 0x0
+#define MX50_PAD_PWM1__USBOH1_USBOTG_OC				0x058 0x304 0x7e8 0x2 0x1
+#define MX50_PAD_PWM1__GPT_CMPOUT1				0x058 0x304 0x000 0x5 0x0
+#define MX50_PAD_PWM1__OBSERVE_MUX_OBSRV_INT_OUT2		0x058 0x304 0x000 0x6 0x0
+#define MX50_PAD_PWM1__SJC_FAIL					0x058 0x304 0x000 0x7 0x0
+#define MX50_PAD_PWM2__PWM2_PWMO				0x05c 0x308 0x000 0x0 0x0
+#define MX50_PAD_PWM2__GPIO6_25					0x05c 0x308 0x000 0x1 0x0
+#define MX50_PAD_PWM2__USBOH1_USBOTG_PWR			0x05c 0x308 0x000 0x2 0x0
+#define MX50_PAD_PWM2__GPT_CMPOUT2				0x05c 0x308 0x000 0x5 0x0
+#define MX50_PAD_PWM2__OBSERVE_MUX_OBSRV_INT_OUT3		0x05c 0x308 0x000 0x6 0x0
+#define MX50_PAD_PWM2__SRC_ANY_PU_RST				0x05c 0x308 0x000 0x7 0x0
+#define MX50_PAD_OWIRE__OWIRE_LINE				0x060 0x30c 0x000 0x0 0x0
+#define MX50_PAD_OWIRE__GPIO6_26				0x060 0x30c 0x000 0x1 0x0
+#define MX50_PAD_OWIRE__USBOH1_USBH1_OC				0x060 0x30c 0x000 0x2 0x0
+#define MX50_PAD_OWIRE__CCM_SSI_EXT1_CLK			0x060 0x30c 0x000 0x3 0x0
+#define MX50_PAD_OWIRE__EPDC_PWRIRQ				0x060 0x30c 0x000 0x4 0x0
+#define MX50_PAD_OWIRE__GPT_CMPOUT3				0x060 0x30c 0x000 0x5 0x0
+#define MX50_PAD_OWIRE__OBSERVE_MUX_OBSRV_INT_OUT4		0x060 0x30c 0x000 0x6 0x0
+#define MX50_PAD_OWIRE__SJC_JTAG_ACT				0x060 0x30c 0x000 0x7 0x0
+#define MX50_PAD_EPITO__EPIT1_EPITO				0x064 0x310 0x000 0x0 0x0
+#define MX50_PAD_EPITO__GPIO6_27				0x064 0x310 0x000 0x1 0x0
+#define MX50_PAD_EPITO__USBOH1_USBH1_PWR			0x064 0x310 0x000 0x2 0x0
+#define MX50_PAD_EPITO__CCM_SSI_EXT2_CLK			0x064 0x310 0x000 0x3 0x0
+#define MX50_PAD_EPITO__DPLLIP1_TOG_EN				0x064 0x310 0x000 0x4 0x0
+#define MX50_PAD_EPITO__GPT_CLK_IN				0x064 0x310 0x000 0x5 0x0
+#define MX50_PAD_EPITO__PMU_IRQ_B				0x064 0x310 0x000 0x6 0x0
+#define MX50_PAD_EPITO__SJC_DE_B				0x064 0x310 0x000 0x7 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_B				0x068 0x314 0x000 0x0 0x0
+#define MX50_PAD_WDOG__GPIO6_28					0x068 0x314 0x000 0x1 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_RST_B_DEB			0x068 0x314 0x000 0x2 0x0
+#define MX50_PAD_WDOG__CCM_XTAL32K				0x068 0x314 0x000 0x6 0x0
+#define MX50_PAD_WDOG__SJC_DONE					0x068 0x314 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXFS__AUDMUX_AUD3_TXFS			0x06c 0x318 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXFS__GPIO6_0				0x06c 0x318 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXFS__SRC_BT_FUSE_RSV_1			0x06c 0x318 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXFS__USBPHY1_DATAOUT_8			0x06c 0x318 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXC__AUDMUX_AUD3_TXC			0x070 0x31c 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXC__GPIO6_1				0x070 0x31c 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXC__SRC_BT_FUSE_RSV_0			0x070 0x31c 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXC__USBPHY1_DATAOUT_9			0x070 0x31c 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXD__AUDMUX_AUD3_TXD			0x074 0x320 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXD__GPIO6_2				0x074 0x320 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXD__CSPI_RDY				0x074 0x320 0x6e8 0x4 0x0
+#define MX50_PAD_SSI_TXD__USBPHY1_DATAOUT_10			0x074 0x320 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXD__AUDMUX_AUD3_RXD			0x078 0x324 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXD__GPIO6_3				0x078 0x324 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXD__CSPI_SS3				0x078 0x324 0x6f4 0x4 0x0
+#define MX50_PAD_SSI_RXD__USBPHY1_DATAOUT_11			0x078 0x324 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXFS__AUDMUX_AUD3_RXFS			0x07c 0x328 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXFS__GPIO6_4				0x07c 0x328 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXFS__UART5_TXD_MUX			0x07c 0x328 0x7e4 0x2 0x0
+#define MX50_PAD_SSI_RXFS__EIM_WEIM_D_6				0x07c 0x328 0x804 0x3 0x0
+#define MX50_PAD_SSI_RXFS__CSPI_SS2				0x07c 0x328 0x6f0 0x4 0x0
+#define MX50_PAD_SSI_RXFS__FEC_COL				0x07c 0x328 0x770 0x5 0x0
+#define MX50_PAD_SSI_RXFS__FEC_MDC				0x07c 0x328 0x000 0x6 0x0
+#define MX50_PAD_SSI_RXFS__USBPHY1_DATAOUT_12			0x07c 0x328 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXC__AUDMUX_AUD3_RXC			0x080 0x32c 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXC__GPIO6_5				0x080 0x32c 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXC__UART5_RXD_MUX				0x080 0x32c 0x7e4 0x2 0x1
+#define MX50_PAD_SSI_RXC__EIM_WEIM_D_7				0x080 0x32c 0x808 0x3 0x0
+#define MX50_PAD_SSI_RXC__CSPI_SS1				0x080 0x32c 0x6ec 0x4 0x0
+#define MX50_PAD_SSI_RXC__FEC_RX_CLK				0x080 0x32c 0x780 0x5 0x0
+#define MX50_PAD_SSI_RXC__FEC_MDIO				0x080 0x32c 0x774 0x6 0x1
+#define MX50_PAD_SSI_RXC__USBPHY1_DATAOUT_13			0x080 0x32c 0x000 0x7 0x0
+#define MX50_PAD_UART1_TXD__UART1_TXD_MUX			0x084 0x330 0x7c4 0x0 0x0
+#define MX50_PAD_UART1_TXD__GPIO6_6				0x084 0x330 0x000 0x1 0x0
+#define MX50_PAD_UART1_TXD__USBPHY1_DATAOUT_14			0x084 0x330 0x000 0x7 0x0
+#define MX50_PAD_UART1_RXD__UART1_RXD_MUX			0x088 0x334 0x7c4 0x0 0x1
+#define MX50_PAD_UART1_RXD__GPIO6_7				0x088 0x334 0x000 0x1 0x0
+#define MX50_PAD_UART1_RXD__USBPHY1_DATAOUT_15			0x088 0x334 0x000 0x7 0x0
+#define MX50_PAD_UART1_CTS__UART1_CTS				0x08c 0x338 0x000 0x0 0x0
+#define MX50_PAD_UART1_CTS__GPIO6_8				0x08c 0x338 0x000 0x1 0x0
+#define MX50_PAD_UART1_CTS__UART5_TXD_MUX			0x08c 0x338 0x7e4 0x2 0x2
+#define MX50_PAD_UART1_CTS__ESDHC4_DAT4				0x08c 0x338 0x760 0x4 0x0
+#define MX50_PAD_UART1_CTS__ESDHC4_CMD				0x08c 0x338 0x74c 0x5 0x0
+#define MX50_PAD_UART1_CTS__USBPHY2_DATAOUT_8			0x08c 0x338 0x000 0x7 0x0
+#define MX50_PAD_UART1_RTS__UART1_RTS				0x090 0x33c 0x7c0 0x0 0x3
+#define MX50_PAD_UART1_RTS__GPIO6_9				0x090 0x33c 0x000 0x1 0x0
+#define MX50_PAD_UART1_RTS__UART5_RXD_MUX			0x090 0x33c 0x7e4 0x2 0x3
+#define MX50_PAD_UART1_RTS__ESDHC4_DAT5				0x090 0x33c 0x764 0x4 0x0
+#define MX50_PAD_UART1_RTS__ESDHC4_CLK				0x090 0x33c 0x748 0x5 0x0
+#define MX50_PAD_UART1_RTS__USBPHY2_DATAOUT_9			0x090 0x33c 0x000 0x7 0x0
+#define MX50_PAD_UART2_TXD__UART2_TXD_MUX			0x094 0x340 0x7cc 0x0 0x2
+#define MX50_PAD_UART2_TXD__GPIO6_10				0x094 0x340 0x000 0x1 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT6				0x094 0x340 0x768 0x4 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT4				0x094 0x340 0x760 0x5 0x1
+#define MX50_PAD_UART2_TXD__USBPHY2_DATAOUT_10			0x094 0x340 0x000 0x7 0x0
+#define MX50_PAD_UART2_RXD__UART2_RXD_MUX			0x098 0x344 0x7cc 0x0 0x3
+#define MX50_PAD_UART2_RXD__GPIO6_11				0x098 0x344 0x000 0x1 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT7				0x098 0x344 0x76c 0x4 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT5				0x098 0x344 0x764 0x5 0x1
+#define MX50_PAD_UART2_RXD__USBPHY2_DATAOUT_11			0x098 0x344 0x000 0x7 0x0
+#define MX50_PAD_UART2_CTS__UART2_CTS				0x09c 0x348 0x000 0x0 0x0
+#define MX50_PAD_UART2_CTS__GPIO6_12				0x09c 0x348 0x000 0x1 0x0
+#define MX50_PAD_UART2_CTS__ESDHC4_CMD				0x09c 0x348 0x74c 0x4 0x1
+#define MX50_PAD_UART2_CTS__ESDHC4_DAT6				0x09c 0x348 0x768 0x5 0x1
+#define MX50_PAD_UART2_CTS__USBPHY2_DATAOUT_12			0x09c 0x348 0x000 0x7 0x0
+#define MX50_PAD_UART2_RTS__UART2_RTS				0x0a0 0x34c 0x7c8 0x0 0x2
+#define MX50_PAD_UART2_RTS__GPIO6_13				0x0a0 0x34c 0x000 0x1 0x0
+#define MX50_PAD_UART2_RTS__ESDHC4_CLK				0x0a0 0x34c 0x748 0x4 0x1
+#define MX50_PAD_UART2_RTS__ESDHC4_DAT7				0x0a0 0x34c 0x76c 0x5 0x1
+#define MX50_PAD_UART2_RTS__USBPHY2_DATAOUT_13			0x0a0 0x34c 0x000 0x7 0x0
+#define MX50_PAD_UART3_TXD__UART3_TXD_MUX			0x0a4 0x350 0x7d4 0x0 0x0
+#define MX50_PAD_UART3_TXD__GPIO6_14				0x0a4 0x350 0x000 0x1 0x0
+#define MX50_PAD_UART3_TXD__ESDHC1_DAT4				0x0a4 0x350 0x000 0x3 0x0
+#define MX50_PAD_UART3_TXD__ESDHC4_DAT0				0x0a4 0x350 0x000 0x4 0x0
+#define MX50_PAD_UART3_TXD__ESDHC2_WP				0x0a4 0x350 0x744 0x5 0x0
+#define MX50_PAD_UART3_TXD__EIM_WEIM_D_12			0x0a4 0x350 0x81c 0x6 0x0
+#define MX50_PAD_UART3_TXD__USBPHY2_DATAOUT_14			0x0a4 0x350 0x000 0x7 0x0
+#define MX50_PAD_UART3_RXD__UART3_RXD_MUX			0x0a8 0x354 0x7d4 0x0 0x1
+#define MX50_PAD_UART3_RXD__GPIO6_15				0x0a8 0x354 0x000 0x1 0x0
+#define MX50_PAD_UART3_RXD__ESDHC1_DAT5				0x0a8 0x354 0x000 0x3 0x0
+#define MX50_PAD_UART3_RXD__ESDHC4_DAT1				0x0a8 0x354 0x754 0x4 0x0
+#define MX50_PAD_UART3_RXD__ESDHC2_CD				0x0a8 0x354 0x740 0x5 0x0
+#define MX50_PAD_UART3_RXD__EIM_WEIM_D_13			0x0a8 0x354 0x820 0x6 0x0
+#define MX50_PAD_UART3_RXD__USBPHY2_DATAOUT_15			0x0a8 0x354 0x000 0x7 0x0
+#define MX50_PAD_UART4_TXD__UART4_TXD_MUX			0x0ac 0x358 0x7dc 0x0 0x0
+#define MX50_PAD_UART4_TXD__GPIO6_16				0x0ac 0x358 0x000 0x1 0x0
+#define MX50_PAD_UART4_TXD__UART3_CTS				0x0ac 0x358 0x7d0 0x2 0x0
+#define MX50_PAD_UART4_TXD__ESDHC1_DAT6				0x0ac 0x358 0x000 0x3 0x0
+#define MX50_PAD_UART4_TXD__ESDHC4_DAT2				0x0ac 0x358 0x758 0x4 0x0
+#define MX50_PAD_UART4_TXD__ESDHC2_LCTL				0x0ac 0x358 0x000 0x5 0x0
+#define MX50_PAD_UART4_TXD__EIM_WEIM_D_14			0x0ac 0x358 0x824 0x6 0x0
+#define MX50_PAD_UART4_RXD__UART4_RXD_MUX			0x0b0 0x35c 0x7dc 0x0 0x1
+#define MX50_PAD_UART4_RXD__GPIO6_17				0x0b0 0x35c 0x000 0x1 0x0
+#define MX50_PAD_UART4_RXD__UART3_RTS				0x0b0 0x35c 0x7d0 0x2 0x1
+#define MX50_PAD_UART4_RXD__ESDHC1_DAT7				0x0b0 0x35c 0x000 0x3 0x0
+#define MX50_PAD_UART4_RXD__ESDHC4_DAT3				0x0b0 0x35c 0x75c 0x4 0x0
+#define MX50_PAD_UART4_RXD__ESDHC1_LCTL				0x0b0 0x35c 0x000 0x5 0x0
+#define MX50_PAD_UART4_RXD__EIM_WEIM_D_15			0x0b0 0x35c 0x828 0x6 0x0
+#define MX50_PAD_CSPI_SCLK__CSPI_SCLK				0x0b4 0x360 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SCLK__GPIO4_8				0x0b4 0x360 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MOSI__CSPI_MOSI				0x0b8 0x364 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MOSI__GPIO4_9				0x0b8 0x364 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MISO__CSPI_MISO				0x0bc 0x368 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MISO__GPIO4_10				0x0bc 0x368 0x000 0x1 0x0
+#define MX50_PAD_CSPI_SS0__CSPI_SS0				0x0c0 0x36c 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SS0__GPIO4_11				0x0c0 0x36c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK			0x0c4 0x370 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SCLK__GPIO4_12				0x0c4 0x370 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY				0x0c4 0x370 0x6e8 0x2 0x1
+#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY			0x0c4 0x370 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SCLK__UART3_RTS				0x0c4 0x370 0x7d0 0x4 0x2
+#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE_6			0x0c4 0x370 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SCLK__EIM_WEIM_D_8			0x0c4 0x370 0x80c 0x7 0x0
+#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI			0x0c8 0x374 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MOSI__GPIO4_13				0x0c8 0x374 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1				0x0c8 0x374 0x6ec 0x2 0x1
+#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1			0x0c8 0x374 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MOSI__UART3_CTS				0x0c8 0x374 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE_7			0x0c8 0x374 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MOSI__EIM_WEIM_D_9			0x0c8 0x374 0x810 0x7 0x0
+#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO			0x0cc 0x378 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MISO__GPIO4_14				0x0cc 0x378 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MISO__CSPI_SS2				0x0cc 0x378 0x6f0 0x2 0x1
+#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2			0x0cc 0x378 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MISO__UART4_RTS				0x0cc 0x378 0x7d8 0x4 0x0
+#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE_8			0x0cc 0x378 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MISO__EIM_WEIM_D_10			0x0cc 0x378 0x814 0x7 0x0
+#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0				0x0d0 0x37c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SS0__GPIO4_15				0x0d0 0x37c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SS0__CSPI_SS3				0x0d0 0x37c 0x6f4 0x2 0x1
+#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3				0x0d0 0x37c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SS0__UART4_CTS				0x0d0 0x37c 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE_9			0x0d0 0x37c 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SS0__EIM_WEIM_D_11			0x0d0 0x37c 0x818 0x7 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK			0x0d4 0x380 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SCLK__GPIO4_16				0x0d4 0x380 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR_RWN			0x0d4 0x380 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY			0x0d4 0x380 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SCLK__UART5_RTS				0x0d4 0x380 0x7e0 0x4 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK			0x0d4 0x380 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_NANDF_CEN_4			0x0d4 0x380 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_WEIM_D_8			0x0d4 0x380 0x80c 0x7 0x1
+#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI			0x0d8 0x384 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MOSI__GPIO4_17				0x0d8 0x384 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RE_E			0x0d8 0x384 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1			0x0d8 0x384 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MOSI__UART5_CTS				0x0d8 0x384 0x7e0 0x4 0x1
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_ENABLE			0x0d8 0x384 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_NANDF_CEN_5			0x0d8 0x384 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_WEIM_D_9			0x0d8 0x384 0x810 0x7 0x1
+#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO			0x0dc 0x388 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MISO__GPIO4_18				0x0dc 0x388 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS				0x0dc 0x388 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2			0x0dc 0x388 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MISO__UART5_TXD_MUX			0x0dc 0x388 0x7e4 0x4 0x4
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC			0x0dc 0x388 0x73c 0x5 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_NANDF_CEN_6			0x0dc 0x388 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_WEIM_D_10			0x0dc 0x388 0x814 0x7 0x1
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0				0x0e0 0x38c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SS0__GPIO4_19				0x0e0 0x38c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS				0x0e0 0x38c 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS3				0x0e0 0x38c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SS0__UART5_RXD_MUX			0x0e0 0x38c 0x7e4 0x4 0x5
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC			0x0e0 0x38c 0x6f8 0x5 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_NANDF_CEN_7			0x0e0 0x38c 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_WEIM_D_11			0x0e0 0x38c 0x818 0x7 0x1
+#define MX50_PAD_SD1_CLK__ESDHC1_CLK				0x0e4 0x390 0x000 0x0 0x0
+#define MX50_PAD_SD1_CLK__GPIO5_0				0x0e4 0x390 0x000 0x1 0x0
+#define MX50_PAD_SD1_CLK__CCM_CLKO				0x0e4 0x390 0x000 0x7 0x0
+#define MX50_PAD_SD1_CMD__ESDHC1_CMD				0x0e8 0x394 0x000 0x0 0x0
+#define MX50_PAD_SD1_CMD__GPIO5_1				0x0e8 0x394 0x000 0x1 0x0
+#define MX50_PAD_SD1_CMD__CCM_CLKO2				0x0e8 0x394 0x000 0x7 0x0
+#define MX50_PAD_SD1_D0__ESDHC1_DAT0				0x0ec 0x398 0x000 0x0 0x0
+#define MX50_PAD_SD1_D0__GPIO5_2				0x0ec 0x398 0x000 0x1 0x0
+#define MX50_PAD_SD1_D0__CCM_PLL1_BYP				0x0ec 0x398 0x6dc 0x7 0x0
+#define MX50_PAD_SD1_D1__ESDHC1_DAT1				0x0f0 0x39c 0x000 0x0 0x0
+#define MX50_PAD_SD1_D1__GPIO5_3				0x0f0 0x39c 0x000 0x1 0x0
+#define MX50_PAD_SD1_D1__CCM_PLL2_BYP				0x0f0 0x39c 0x000 0x7 0x0
+#define MX50_PAD_SD1_D2__ESDHC1_DAT2				0x0f4 0x3a0 0x000 0x0 0x0
+#define MX50_PAD_SD1_D2__GPIO5_4				0x0f4 0x3a0 0x000 0x1 0x0
+#define MX50_PAD_SD1_D2__CCM_PLL3_BYP				0x0f4 0x3a0 0x6e4 0x7 0x0
+#define MX50_PAD_SD1_D3__ESDHC1_DAT3				0x0f8 0x3a4 0x000 0x0 0x0
+#define MX50_PAD_SD1_D3__GPIO5_5				0x0f8 0x3a4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__ESDHC2_CLK				0x0fc 0x3a8 0x000 0x0 0x0
+#define MX50_PAD_SD2_CLK__GPIO5_6				0x0fc 0x3a8 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__MSHC_SCLK				0x0fc 0x3a8 0x000 0x2 0x0
+#define MX50_PAD_SD2_CMD__ESDHC2_CMD				0x100 0x3ac 0x000 0x0 0x0
+#define MX50_PAD_SD2_CMD__GPIO5_7				0x100 0x3ac 0x000 0x1 0x0
+#define MX50_PAD_SD2_CMD__MSHC_BS				0x100 0x3ac 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__ESDHC2_DAT0				0x104 0x3b0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D0__GPIO5_8				0x104 0x3b0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D0__MSHC_DATA_0				0x104 0x3b0 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__KPP_COL_4				0x104 0x3b0 0x790 0x3 0x0
+#define MX50_PAD_SD2_D1__ESDHC2_DAT1				0x108 0x3b4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D1__GPIO5_9				0x108 0x3b4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D1__MSHC_DATA_1				0x108 0x3b4 0x000 0x2 0x0
+#define MX50_PAD_SD2_D1__KPP_ROW_4				0x108 0x3b4 0x7a0 0x3 0x0
+#define MX50_PAD_SD2_D2__ESDHC2_DAT2				0x10c 0x3b8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D2__GPIO5_10				0x10c 0x3b8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D2__MSHC_DATA_2				0x10c 0x3b8 0x000 0x2 0x0
+#define MX50_PAD_SD2_D2__KPP_COL_5				0x10c 0x3b8 0x794 0x3 0x0
+#define MX50_PAD_SD2_D3__ESDHC2_DAT3				0x110 0x3bc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D3__GPIO5_11				0x110 0x3bc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D3__MSHC_DATA_3				0x110 0x3bc 0x000 0x2 0x0
+#define MX50_PAD_SD2_D3__KPP_ROW_5				0x110 0x3bc 0x7a4 0x3 0x0
+#define MX50_PAD_SD2_D4__ESDHC2_DAT4				0x114 0x3c0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D4__GPIO5_12				0x114 0x3c0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D4__AUDMUX_AUD4_RXFS			0x114 0x3c0 0x6d0 0x2 0x0
+#define MX50_PAD_SD2_D4__KPP_COL_6				0x114 0x3c0 0x798 0x3 0x0
+#define MX50_PAD_SD2_D4__EIM_WEIM_D_0				0x114 0x3c0 0x7ec 0x4 0x0
+#define MX50_PAD_SD2_D4__CCM_CCM_OUT_0				0x114 0x3c0 0x000 0x7 0x0
+#define MX50_PAD_SD2_D5__ESDHC2_DAT5				0x118 0x3c4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D5__GPIO5_13				0x118 0x3c4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D5__AUDMUX_AUD4_RXC			0x118 0x3c4 0x6cc 0x2 0x0
+#define MX50_PAD_SD2_D5__KPP_ROW_6				0x118 0x3c4 0x7a8 0x3 0x0
+#define MX50_PAD_SD2_D5__EIM_WEIM_D_1				0x118 0x3c4 0x7f0 0x4 0x0
+#define MX50_PAD_SD2_D5__CCM_CCM_OUT_1				0x118 0x3c4 0x000 0x7 0x0
+#define MX50_PAD_SD2_D6__ESDHC2_DAT6				0x11c 0x3c8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D6__GPIO5_14				0x11c 0x3c8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D6__AUDMUX_AUD4_RXD			0x11c 0x3c8 0x6c4 0x2 0x0
+#define MX50_PAD_SD2_D6__KPP_COL_7				0x11c 0x3c8 0x79c 0x3 0x0
+#define MX50_PAD_SD2_D6__EIM_WEIM_D_2				0x11c 0x3c8 0x7f4 0x4 0x0
+#define MX50_PAD_SD2_D6__CCM_CCM_OUT_2				0x11c 0x3c8 0x000 0x7 0x0
+#define MX50_PAD_SD2_D7__ESDHC2_DAT7				0x120 0x3cc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D7__GPIO5_15				0x120 0x3cc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D7__AUDMUX_AUD4_TXFS			0x120 0x3cc 0x6d8 0x2 0x0
+#define MX50_PAD_SD2_D7__KPP_ROW_7				0x120 0x3cc 0x7ac 0x3 0x0
+#define MX50_PAD_SD2_D7__EIM_WEIM_D_3				0x120 0x3cc 0x7f8 0x4 0x0
+#define MX50_PAD_SD2_D7__CCM_STOP				0x120 0x3cc 0x000 0x7 0x0
+#define MX50_PAD_SD2_WP__ESDHC2_WP				0x124 0x3d0 0x744 0x0 0x1
+#define MX50_PAD_SD2_WP__GPIO5_16				0x124 0x3d0 0x000 0x1 0x0
+#define MX50_PAD_SD2_WP__AUDMUX_AUD4_TXD			0x124 0x3d0 0x6c8 0x2 0x0
+#define MX50_PAD_SD2_WP__EIM_WEIM_D_4				0x124 0x3d0 0x7fc 0x4 0x0
+#define MX50_PAD_SD2_WP__CCM_WAIT				0x124 0x3d0 0x000 0x7 0x0
+#define MX50_PAD_SD2_CD__ESDHC2_CD				0x128 0x3d4 0x740 0x0 0x1
+#define MX50_PAD_SD2_CD__GPIO5_17				0x128 0x3d4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CD__AUDMUX_AUD4_TXC			0x128 0x3d4 0x6d4 0x2 0x0
+#define MX50_PAD_SD2_CD__EIM_WEIM_D_5				0x128 0x3d4 0x800 0x4 0x0
+#define MX50_PAD_SD2_CD__CCM_REF_EN_B				0x128 0x3d4 0x000 0x7 0x0
+#define MX50_PAD_DISP_D0__ELCDIF_DAT_0				0x12c 0x40c 0x6fc 0x0 0x0
+#define MX50_PAD_DISP_D0__GPIO2_0				0x12c 0x40c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D0__FEC_TX_CLK				0x12c 0x40c 0x78c 0x2 0x0
+#define MX50_PAD_DISP_D0__EIM_WEIM_A_16				0x12c 0x40c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D0__SDMA_DEBUG_PC_0			0x12c 0x40c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D0__USBPHY1_VSTATUS_0			0x12c 0x40c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D1__ELCDIF_DAT_1				0x130 0x410 0x700 0x0 0x0
+#define MX50_PAD_DISP_D1__GPIO2_1				0x130 0x410 0x000 0x1 0x0
+#define MX50_PAD_DISP_D1__FEC_RX_ERR				0x130 0x410 0x788 0x2 0x0
+#define MX50_PAD_DISP_D1__EIM_WEIM_A_17				0x130 0x410 0x000 0x3 0x0
+#define MX50_PAD_DISP_D1__SDMA_DEBUG_PC_1			0x130 0x410 0x000 0x6 0x0
+#define MX50_PAD_DISP_D1__USBPHY1_VSTATUS_1			0x130 0x410 0x000 0x7 0x0
+#define MX50_PAD_DISP_D2__ELCDIF_DAT_2				0x134 0x414 0x704 0x0 0x0
+#define MX50_PAD_DISP_D2__GPIO2_2				0x134 0x414 0x000 0x1 0x0
+#define MX50_PAD_DISP_D2__FEC_RX_DV				0x134 0x414 0x784 0x2 0x0
+#define MX50_PAD_DISP_D2__EIM_WEIM_A_18				0x134 0x414 0x000 0x3 0x0
+#define MX50_PAD_DISP_D2__SDMA_DEBUG_PC_2			0x134 0x414 0x000 0x6 0x0
+#define MX50_PAD_DISP_D2__USBPHY1_VSTATUS_2			0x134 0x414 0x000 0x7 0x0
+#define MX50_PAD_DISP_D3__ELCDIF_DAT_3				0x138 0x418 0x708 0x0 0x0
+#define MX50_PAD_DISP_D3__GPIO2_3				0x138 0x418 0x000 0x1 0x0
+#define MX50_PAD_DISP_D3__FEC_RDATA_1				0x138 0x418 0x77c 0x2 0x0
+#define MX50_PAD_DISP_D3__EIM_WEIM_A_19				0x138 0x418 0x000 0x3 0x0
+#define MX50_PAD_DISP_D3__FEC_COL				0x138 0x418 0x770 0x4 0x1
+#define MX50_PAD_DISP_D3__SDMA_DEBUG_PC_3			0x138 0x418 0x000 0x6 0x0
+#define MX50_PAD_DISP_D3__USBPHY1_VSTATUS_3			0x138 0x418 0x000 0x7 0x0
+#define MX50_PAD_DISP_D4__ELCDIF_DAT_4				0x13c 0x41c 0x70c 0x0 0x0
+#define MX50_PAD_DISP_D4__GPIO2_4				0x13c 0x41c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D4__FEC_RDATA_0				0x13c 0x41c 0x778 0x2 0x0
+#define MX50_PAD_DISP_D4__EIM_WEIM_A_20				0x13c 0x41c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D4__SDMA_DEBUG_PC_4			0x13c 0x41c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D4__USBPHY1_VSTATUS_4			0x13c 0x41c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D5__ELCDIF_DAT_5				0x140 0x420 0x710 0x0 0x0
+#define MX50_PAD_DISP_D5__GPIO2_5				0x140 0x420 0x000 0x1 0x0
+#define MX50_PAD_DISP_D5__FEC_TX_EN				0x140 0x420 0x000 0x2 0x0
+#define MX50_PAD_DISP_D5__EIM_WEIM_A_21				0x140 0x420 0x000 0x3 0x0
+#define MX50_PAD_DISP_D5__SDMA_DEBUG_PC_5			0x140 0x420 0x000 0x6 0x0
+#define MX50_PAD_DISP_D5__USBPHY1_VSTATUS_5			0x140 0x420 0x000 0x7 0x0
+#define MX50_PAD_DISP_D6__ELCDIF_DAT_6				0x144 0x424 0x714 0x0 0x0
+#define MX50_PAD_DISP_D6__GPIO2_6				0x144 0x424 0x000 0x1 0x0
+#define MX50_PAD_DISP_D6__FEC_TDATA_1				0x144 0x424 0x000 0x2 0x0
+#define MX50_PAD_DISP_D6__EIM_WEIM_A_22				0x144 0x424 0x000 0x3 0x0
+#define MX50_PAD_DISP_D6__FEC_RX_CLK				0x144 0x424 0x780 0x4 0x1
+#define MX50_PAD_DISP_D6__SDMA_DEBUG_PC_6			0x144 0x424 0x000 0x6 0x0
+#define MX50_PAD_DISP_D6__USBPHY1_VSTATUS_6			0x144 0x424 0x000 0x7 0x0
+#define MX50_PAD_DISP_D7__ELCDIF_DAT_7				0x148 0x428 0x718 0x0 0x0
+#define MX50_PAD_DISP_D7__GPIO2_7				0x148 0x428 0x000 0x1 0x0
+#define MX50_PAD_DISP_D7__FEC_TDATA_0				0x148 0x428 0x000 0x2 0x0
+#define MX50_PAD_DISP_D7__EIM_WEIM_A_23				0x148 0x428 0x000 0x3 0x0
+#define MX50_PAD_DISP_D7__SDMA_DEBUG_PC_7			0x148 0x428 0x000 0x6 0x0
+#define MX50_PAD_DISP_D7__USBPHY1_VSTATUS_7			0x148 0x428 0x000 0x7 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_WR_RWN				0x14c 0x42c 0x000 0x0 0x0
+#define MX50_PAD_DISP_WR__GPIO2_16				0x14c 0x42c 0x000 0x1 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_DOTCLK				0x14c 0x42c 0x000 0x2 0x0
+#define MX50_PAD_DISP_WR__EIM_WEIM_A_24				0x14c 0x42c 0x000 0x3 0x0
+#define MX50_PAD_DISP_WR__SDMA_DEBUG_PC_8			0x14c 0x42c 0x000 0x6 0x0
+#define MX50_PAD_DISP_WR__USBPHY1_AVALID			0x14c 0x42c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_RD_E				0x150 0x430 0x000 0x0 0x0
+#define MX50_PAD_DISP_RD__GPIO2_19				0x150 0x430 0x000 0x1 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_ENABLE				0x150 0x430 0x000 0x2 0x0
+#define MX50_PAD_DISP_RD__EIM_WEIM_A_25				0x150 0x430 0x000 0x3 0x0
+#define MX50_PAD_DISP_RD__SDMA_DEBUG_PC_9			0x150 0x430 0x000 0x6 0x0
+#define MX50_PAD_DISP_RD__USBPHY1_BVALID			0x150 0x430 0x000 0x7 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_RS				0x154 0x434 0x000 0x0 0x0
+#define MX50_PAD_DISP_RS__GPIO2_17				0x154 0x434 0x000 0x1 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_VSYNC				0x154 0x434 0x73c 0x2 0x1
+#define MX50_PAD_DISP_RS__EIM_WEIM_A_26				0x154 0x434 0x000 0x3 0x0
+#define MX50_PAD_DISP_RS__SDMA_DEBUG_PC_10			0x154 0x434 0x000 0x6 0x0
+#define MX50_PAD_DISP_RS__USBPHY1_ENDSESSION			0x154 0x434 0x000 0x7 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_CS				0x158 0x438 0x000 0x0 0x0
+#define MX50_PAD_DISP_CS__GPIO2_21				0x158 0x438 0x000 0x1 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_HSYNC				0x158 0x438 0x6f8 0x2 0x1
+#define MX50_PAD_DISP_CS__EIM_WEIM_A_27				0x158 0x438 0x000 0x3 0x0
+#define MX50_PAD_DISP_CS__EIM_WEIM_CS_3				0x158 0x438 0x000 0x4 0x0
+#define MX50_PAD_DISP_CS__SDMA_DEBUG_PC_11			0x158 0x438 0x000 0x6 0x0
+#define MX50_PAD_DISP_CS__USBPHY1_IDDIG				0x158 0x438 0x000 0x7 0x0
+#define MX50_PAD_DISP_BUSY__ELCDIF_BUSY				0x15c 0x43c 0x6f8 0x0 0x2
+#define MX50_PAD_DISP_BUSY__GPIO2_18				0x15c 0x43c 0x000 0x1 0x0
+#define MX50_PAD_DISP_BUSY__EIM_WEIM_CS_3			0x15c 0x43c 0x000 0x4 0x0
+#define MX50_PAD_DISP_BUSY__SDMA_DEBUG_PC_12			0x15c 0x43c 0x000 0x6 0x0
+#define MX50_PAD_DISP_BUSY__USBPHY2_HOSTDISCONNECT		0x15c 0x43c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RESET__ELCDIF_RESET			0x160 0x440 0x000 0x0 0x0
+#define MX50_PAD_DISP_RESET__GPIO2_20				0x160 0x440 0x000 0x1 0x0
+#define MX50_PAD_DISP_RESET__EIM_WEIM_CS_3			0x160 0x440 0x000 0x4 0x0
+#define MX50_PAD_DISP_RESET__SDMA_DEBUG_PC_13			0x160 0x440 0x000 0x6 0x0
+#define MX50_PAD_DISP_RESET__USBPHY2_BISTOK			0x160 0x440 0x000 0x7 0x0
+#define MX50_PAD_SD3_CMD__ESDHC3_CMD				0x164 0x444 0x000 0x0 0x0
+#define MX50_PAD_SD3_CMD__GPIO5_18				0x164 0x444 0x000 0x1 0x0
+#define MX50_PAD_SD3_CMD__EIM_NANDF_WRN				0x164 0x444 0x000 0x2 0x0
+#define MX50_PAD_SD3_CMD__SSP_CMD				0x164 0x444 0x000 0x3 0x0
+#define MX50_PAD_SD3_CLK__ESDHC3_CLK				0x168 0x448 0x000 0x0 0x0
+#define MX50_PAD_SD3_CLK__GPIO5_19				0x168 0x448 0x000 0x1 0x0
+#define MX50_PAD_SD3_CLK__EIM_NANDF_RDN				0x168 0x448 0x000 0x2 0x0
+#define MX50_PAD_SD3_CLK__SSP_CLK				0x168 0x448 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__ESDHC3_DAT0				0x16c 0x44c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D0__GPIO5_20				0x16c 0x44c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D0__EIM_NANDF_D_4				0x16c 0x44c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D0__SSP_D0					0x16c 0x44c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__CCM_PLL1_BYP				0x16c 0x44c 0x6dc 0x7 0x1
+#define MX50_PAD_SD3_D1__ESDHC3_DAT1				0x170 0x450 0x000 0x0 0x0
+#define MX50_PAD_SD3_D1__GPIO5_21				0x170 0x450 0x000 0x1 0x0
+#define MX50_PAD_SD3_D1__EIM_NANDF_D_5				0x170 0x450 0x000 0x2 0x0
+#define MX50_PAD_SD3_D1__SSP_D1					0x170 0x450 0x000 0x3 0x0
+#define MX50_PAD_SD3_D1__CCM_PLL2_BYP				0x170 0x450 0x000 0x7 0x0
+#define MX50_PAD_SD3_D2__ESDHC3_DAT2				0x174 0x454 0x000 0x0 0x0
+#define MX50_PAD_SD3_D2__GPIO5_22				0x174 0x454 0x000 0x1 0x0
+#define MX50_PAD_SD3_D2__EIM_NANDF_D_6				0x174 0x454 0x000 0x2 0x0
+#define MX50_PAD_SD3_D2__SSP_D2					0x174 0x454 0x000 0x3 0x0
+#define MX50_PAD_SD3_D2__CCM_PLL3_BYP				0x174 0x454 0x6e4 0x7 0x1
+#define MX50_PAD_SD3_D3__ESDHC3_DAT3				0x178 0x458 0x000 0x0 0x0
+#define MX50_PAD_SD3_D3__GPIO5_23				0x178 0x458 0x000 0x1 0x0
+#define MX50_PAD_SD3_D3__EIM_NANDF_D_7				0x178 0x458 0x000 0x2 0x0
+#define MX50_PAD_SD3_D3__SSP_D3					0x178 0x458 0x000 0x3 0x0
+#define MX50_PAD_SD3_D4__ESDHC3_DAT4				0x17c 0x45c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D4__GPIO5_24				0x17c 0x45c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D4__EIM_NANDF_D_0				0x17c 0x45c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D4__SSP_D4					0x17c 0x45c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D5__ESDHC3_DAT5				0x180 0x460 0x000 0x0 0x0
+#define MX50_PAD_SD3_D5__GPIO5_25				0x180 0x460 0x000 0x1 0x0
+#define MX50_PAD_SD3_D5__EIM_NANDF_D_1				0x180 0x460 0x000 0x2 0x0
+#define MX50_PAD_SD3_D5__SSP_D5					0x180 0x460 0x000 0x3 0x0
+#define MX50_PAD_SD3_D6__ESDHC3_DAT6				0x184 0x464 0x000 0x0 0x0
+#define MX50_PAD_SD3_D6__GPIO5_26				0x184 0x464 0x000 0x1 0x0
+#define MX50_PAD_SD3_D6__EIM_NANDF_D_2				0x184 0x464 0x000 0x2 0x0
+#define MX50_PAD_SD3_D6__SSP_D6					0x184 0x464 0x000 0x3 0x0
+#define MX50_PAD_SD3_D7__ESDHC3_DAT7				0x188 0x468 0x000 0x0 0x0
+#define MX50_PAD_SD3_D7__GPIO5_27				0x188 0x468 0x000 0x1 0x0
+#define MX50_PAD_SD3_D7__EIM_NANDF_D_3				0x188 0x468 0x000 0x2 0x0
+#define MX50_PAD_SD3_D7__SSP_D7					0x188 0x468 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC3_WP				0x18c 0x46C 0x000 0x0 0x0
+#define MX50_PAD_SD3_WP__GPIO5_28				0x18c 0x46C 0x000 0x1 0x0
+#define MX50_PAD_SD3_WP__EIM_NANDF_RESETN			0x18c 0x46C 0x000 0x2 0x0
+#define MX50_PAD_SD3_WP__SSP_CD					0x18c 0x46C 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC4_LCTL				0x18c 0x46C 0x000 0x4 0x0
+#define MX50_PAD_SD3_WP__EIM_WEIM_CS_3				0x18c 0x46C 0x000 0x5 0x0
+#define MX50_PAD_DISP_D8__ELCDIF_DAT_8				0x190 0x470 0x71c 0x0 0x0
+#define MX50_PAD_DISP_D8__GPIO2_8				0x190 0x470 0x000 0x1 0x0
+#define MX50_PAD_DISP_D8__EIM_NANDF_CLE				0x190 0x470 0x000 0x2 0x0
+#define MX50_PAD_DISP_D8__ESDHC1_LCTL				0x190 0x470 0x000 0x3 0x0
+#define MX50_PAD_DISP_D8__ESDHC4_CMD				0x190 0x470 0x74c 0x4 0x2
+#define MX50_PAD_DISP_D8__KPP_COL_4				0x190 0x470 0x790 0x5 0x1
+#define MX50_PAD_DISP_D8__FEC_TX_CLK				0x190 0x470 0x78c 0x6 0x1
+#define MX50_PAD_DISP_D8__USBPHY1_DATAOUT_0			0x190 0x470 0x000 0x7 0x0
+#define MX50_PAD_DISP_D9__ELCDIF_DAT_9				0x194 0x474 0x720 0x0 0x0
+#define MX50_PAD_DISP_D9__GPIO2_9				0x194 0x474 0x000 0x1 0x0
+#define MX50_PAD_DISP_D9__EIM_NANDF_ALE				0x194 0x474 0x000 0x2 0x0
+#define MX50_PAD_DISP_D9__ESDHC2_LCTL				0x194 0x474 0x000 0x3 0x0
+#define MX50_PAD_DISP_D9__ESDHC4_CLK				0x194 0x474 0x748 0x4 0x2
+#define MX50_PAD_DISP_D9__KPP_ROW_4				0x194 0x474 0x7a0 0x5 0x1
+#define MX50_PAD_DISP_D9__FEC_RX_ER				0x194 0x474 0x788 0x6 0x1
+#define MX50_PAD_DISP_D9__USBPHY1_DATAOUT_1			0x194 0x474 0x000 0x7 0x0
+#define MX50_PAD_DISP_D10__ELCDIF_DAT_10			0x198 0x478 0x724 0x0 0x0
+#define MX50_PAD_DISP_D10__GPIO2_10				0x198 0x478 0x000 0x1 0x0
+#define MX50_PAD_DISP_D10__EIM_NANDF_CEN_0			0x198 0x478 0x000 0x2 0x0
+#define MX50_PAD_DISP_D10__ESDHC3_LCTL				0x198 0x478 0x000 0x3 0x0
+#define MX50_PAD_DISP_D10__ESDHC4_DAT0				0x198 0x478 0x000 0x4 0x0
+#define MX50_PAD_DISP_D10__KPP_COL_5				0x198 0x478 0x794 0x5 0x1
+#define MX50_PAD_DISP_D10__FEC_RX_DV				0x198 0x478 0x784 0x6 0x1
+#define MX50_PAD_DISP_D10__USBPHY1_DATAOUT_2			0x198 0x478 0x000 0x7 0x0
+#define MX50_PAD_DISP_D11__ELCDIF_DAT_11			0x19c 0x47c 0x728 0x0 0x0
+#define MX50_PAD_DISP_D11__GPIO2_11				0x19c 0x47c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D11__EIM_NANDF_CEN_1			0x19c 0x47c 0x000 0x2 0x0
+#define MX50_PAD_DISP_D11__ESDHC4_DAT1				0x19c 0x47c 0x754 0x4 0x1
+#define MX50_PAD_DISP_D11__KPP_ROW_5				0x19c 0x47c 0x7a4 0x5 0x1
+#define MX50_PAD_DISP_D11__FEC_RDATA_1				0x19c 0x47c 0x77c 0x6 0x1
+#define MX50_PAD_DISP_D11__USBPHY1_DATAOUT_3			0x19c 0x47c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D12__ELCDIF_DAT_12			0x1a0 0x480 0x72c 0x0 0x0
+#define MX50_PAD_DISP_D12__GPIO2_12				0x1a0 0x480 0x000 0x1 0x0
+#define MX50_PAD_DISP_D12__EIM_NANDF_CEN_2			0x1a0 0x480 0x000 0x2 0x0
+#define MX50_PAD_DISP_D12__ESDHC1_CD				0x1a0 0x480 0x000 0x3 0x0
+#define MX50_PAD_DISP_D12__ESDHC4_DAT2				0x1a0 0x480 0x758 0x4 0x1
+#define MX50_PAD_DISP_D12__KPP_COL_6				0x1a0 0x480 0x798 0x5 0x1
+#define MX50_PAD_DISP_D12__FEC_RDATA_0				0x1a0 0x480 0x778 0x6 0x1
+#define MX50_PAD_DISP_D12__USBPHY1_DATAOUT_4			0x1a0 0x480 0x000 0x7 0x0
+#define MX50_PAD_DISP_D13__ELCDIF_DAT_13			0x1a4 0x484 0x730 0x0 0x0
+#define MX50_PAD_DISP_D13__GPIO2_13				0x1a4 0x484 0x000 0x1 0x0
+#define MX50_PAD_DISP_D13__EIM_NANDF_CEN_3			0x1a4 0x484 0x000 0x2 0x0
+#define MX50_PAD_DISP_D13__ESDHC3_CD				0x1a4 0x484 0x000 0x3 0x0
+#define MX50_PAD_DISP_D13__ESDHC4_DAT3				0x1a4 0x484 0x75c 0x4 0x1
+#define MX50_PAD_DISP_D13__KPP_ROW_6				0x1a4 0x484 0x7a8 0x5 0x1
+#define MX50_PAD_DISP_D13__FEC_TX_EN				0x1a4 0x484 0x000 0x6 0x0
+#define MX50_PAD_DISP_D13__USBPHY1_DATAOUT_5			0x1a4 0x484 0x000 0x7 0x0
+#define MX50_PAD_DISP_D14__ELCDIF_DAT_14			0x1a8 0x488 0x734 0x0 0x0
+#define MX50_PAD_DISP_D14__GPIO2_14				0x1a8 0x488 0x000 0x1 0x0
+#define MX50_PAD_DISP_D14__EIM_NANDF_READY0			0x1a8 0x488 0x7b4 0x2 0x1
+#define MX50_PAD_DISP_D14__ESDHC1_WP				0x1a8 0x488 0x000 0x3 0x0
+#define MX50_PAD_DISP_D14__ESDHC4_WP				0x1a8 0x488 0x000 0x4 0x0
+#define MX50_PAD_DISP_D14__KPP_COL_7				0x1a8 0x488 0x79c 0x5 0x1
+#define MX50_PAD_DISP_D14__FEC_TDATA_1				0x1a8 0x488 0x000 0x6 0x0
+#define MX50_PAD_DISP_D14__USBPHY1_DATAOUT_6			0x1a8 0x488 0x000 0x7 0x0
+#define MX50_PAD_DISP_D15__ELCDIF_DAT_15			0x1ac 0x48c 0x738 0x0 0x0
+#define MX50_PAD_DISP_D15__GPIO2_15				0x1ac 0x48c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D15__EIM_NANDF_DQS			0x1ac 0x48c 0x7b0 0x2 0x1
+#define MX50_PAD_DISP_D15__ESDHC3_RST				0x1ac 0x48c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D15__ESDHC4_CD				0x1ac 0x48c 0x000 0x4 0x0
+#define MX50_PAD_DISP_D15__KPP_ROW_7				0x1ac 0x48c 0x7ac 0x5 0x1
+#define MX50_PAD_DISP_D15__FEC_TDATA_0				0x1ac 0x48c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D15__USBPHY1_DATAOUT_7			0x1ac 0x48c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D0__EPDC_SDDO_0				0x1b0 0x54c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D0__GPIO3_0				0x1b0 0x54c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D0__EIM_WEIM_D_0				0x1b0 0x54c 0x7ec 0x2 0x1
+#define MX50_PAD_EPDC_D0__ELCDIF_RS				0x1b0 0x54c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D0__ELCDIF_DOTCLK				0x1b0 0x54c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D0__SDMA_DEBUG_EVT_CHN_LINES_0		0x1b0 0x54c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D0__USBPHY2_DATAOUT_0			0x1b0 0x54c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D1__EPDC_SDDO_1				0x1b4 0x550 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D1__GPIO3_1				0x1b4 0x550 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D1__EIM_WEIM_D_1				0x1b4 0x550 0x7f0 0x2 0x1
+#define MX50_PAD_EPDC_D1__ELCDIF_CS				0x1b4 0x550 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D1__ELCDIF_ENABLE				0x1b4 0x550 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D1__SDMA_DEBUG_EVT_CHN_LINES_1		0x1b4 0x550 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D1__USBPHY2_DATAOUT_1			0x1b4 0x550 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D2__EPDC_SDDO_2				0x1b8 0x554 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D2__GPIO3_2				0x1b8 0x554 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D2__EIM_WEIM_D_2				0x1b8 0x554 0x7f4 0x2 0x1
+#define MX50_PAD_EPDC_D2__ELCDIF_WR_RWN				0x1b8 0x554 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC				0x1b8 0x554 0x73c 0x4 0x2
+#define MX50_PAD_EPDC_D2__SDMA_DEBUG_EVT_CHN_LINES_2		0x1b8 0x554 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D2__USBPHY2_DATAOUT_2			0x1b8 0x554 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D3__EPDC_SDDO_3				0x1bc 0x558 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D3__GPIO3_3				0x1bc 0x558 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D3__EIM_WEIM_D_3				0x1bc 0x558 0x7f8 0x2 0x1
+#define MX50_PAD_EPDC_D3__ELCDIF_RD_E				0x1bc 0x558 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC				0x1bc 0x558 0x6f8 0x4 0x3
+#define MX50_PAD_EPDC_D3__SDMA_DEBUG_EVT_CHN_LINES_3		0x1bc 0x558 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D3__USBPHY2_DATAOUT_3			0x1bc 0x558 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D4__EPDC_SDDO_4				0x1c0 0x55c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D4__GPIO3_4				0x1c0 0x55c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D4__EIM_WEIM_D_4				0x1c0 0x55c 0x7fc 0x2 0x1
+#define MX50_PAD_EPDC_D4__SDMA_DEBUG_EVT_CHN_LINES_4		0x1c0 0x55c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D4__USBPHY2_DATAOUT_4			0x1c0 0x55c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D5__EPDC_SDDO_5				0x1c4 0x560 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D5__GPIO3_5				0x1c4 0x560 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D5__EIM_WEIM_D_5				0x1c4 0x560 0x800 0x2 0x1
+#define MX50_PAD_EPDC_D5__SDMA_DEBUG_EVT_CHN_LINES_5		0x1c4 0x560 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D5__USBPHY2_DATAOUT_5			0x1c4 0x560 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D6__EPDC_SDDO_6				0x1c8 0x564 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D6__GPIO3_6				0x1c8 0x564 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D6__EIM_WEIM_D_6				0x1c8 0x564 0x804 0x2 0x1
+#define MX50_PAD_EPDC_D6__SDMA_DEBUG_EVT_CHN_LINES_6		0x1c8 0x564 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D6__USBPHY2_DATAOUT_6			0x1c8 0x564 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D7__EPDC_SDDO_7				0x1cc 0x568 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D7__GPIO3_7				0x1cc 0x568 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D7__EIM_WEIM_D_7				0x1cc 0x568 0x808 0x2 0x1
+#define MX50_PAD_EPDC_D7__SDMA_DEBUG_EVT_CHN_LINES_7		0x1cc 0x568 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D7__USBPHY2_DATAOUT_7			0x1cc 0x568 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D8__EPDC_SDDO_8				0x1d0 0x56c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D8__GPIO3_8				0x1d0 0x56c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D8__EIM_WEIM_D_8				0x1d0 0x56c 0x80c 0x2 0x2
+#define MX50_PAD_EPDC_D8__ELCDIF_DAT_24				0x1d0 0x56c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D8__SDMA_DEBUG_MATCHED_DMBUS		0x1d0 0x56c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D8__USBPHY2_VSTATUS_0			0x1d0 0x56c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D9__EPDC_SDDO_9				0x1d4 0x570 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D9__GPIO3_9				0x1d4 0x570 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D9__EIM_WEIM_D_9				0x1d4 0x570 0x810 0x2 0x2
+#define MX50_PAD_EPDC_D9__ELCDIF_DAT_25				0x1d4 0x570 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D9__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x1d4 0x570 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D9__USBPHY2_VSTATUS_1			0x1d4 0x570 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D10__EPDC_SDDO_10				0x1d8 0x574 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D10__GPIO3_10				0x1d8 0x574 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D10__EIM_WEIM_D_10			0x1d8 0x574 0x814 0x2 0x2
+#define MX50_PAD_EPDC_D10__ELCDIF_DAT_26			0x1d8 0x574 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D10__SDMA_DEBUG_EVENT_CHANNEL_0		0x1d8 0x574 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D10__USBPHY2_VSTATUS_2			0x1d8 0x574 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D11__EPDC_SDDO_11				0x1dc 0x578 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D11__GPIO3_11				0x1dc 0x578 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D11__EIM_WEIM_D_11			0x1dc 0x578 0x818 0x2 0x2
+#define MX50_PAD_EPDC_D11__ELCDIF_DAT_27			0x1dc 0x578 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D11__SDMA_DEBUG_EVENT_CHANNEL_1		0x1dc 0x578 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D11__USBPHY2_VSTATUS_3			0x1dc 0x578 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D12__EPDC_SDDO_12				0x1e0 0x57c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D12__GPIO3_12				0x1e0 0x57c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D12__EIM_WEIM_D_12			0x1e0 0x57c 0x81c 0x2 0x1
+#define MX50_PAD_EPDC_D12__ELCDIF_DAT_28			0x1e0 0x57c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D12__SDMA_DEBUG_EVENT_CHANNEL_2		0x1e0 0x57c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D12__USBPHY2_VSTATUS_4			0x1e0 0x57c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D13__EPDC_SDDO_13				0x1e4 0x580 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D13__GPIO3_13				0x1e4 0x580 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D13__EIM_WEIM_D_13			0x1e4 0x580 0x820 0x2 0x1
+#define MX50_PAD_EPDC_D13__ELCDIF_DAT_29			0x1e4 0x580 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D13__SDMA_DEBUG_EVENT_CHANNEL_3		0x1e4 0x580 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D13__USBPHY2_VSTATUS_5			0x1e4 0x580 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D14__EPDC_SDDO_14				0x1e8 0x584 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D14__GPIO3_14				0x1e8 0x584 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D14__EIM_WEIM_D_14			0x1e8 0x584 0x824 0x2 0x1
+#define MX50_PAD_EPDC_D14__ELCDIF_DAT_30			0x1e8 0x584 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D14__AUDMUX_AUD6_TXD			0x1e8 0x584 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D14__SDMA_DEBUG_EVENT_CHANNEL_4		0x1e8 0x584 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D14__USBPHY2_VSTATUS_6			0x1e8 0x584 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D15__EPDC_SDDO_15				0x1ec 0x588 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D15__GPIO3_15				0x1ec 0x588 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D15__EIM_WEIM_D_15			0x1ec 0x588 0x828 0x2 0x1
+#define MX50_PAD_EPDC_D15__ELCDIF_DAT_31			0x1ec 0x588 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D15__AUDMUX_AUD6_TXC			0x1ec 0x588 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D15__SDMA_DEBUG_EVENT_CHANNEL_5		0x1ec 0x588 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D15__USBPHY2_VSTATUS_7			0x1ec 0x588 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK				0x1f0 0x58c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDCLK__GPIO3_16				0x1f0 0x58c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDCLK__EIM_WEIM_D_16			0x1f0 0x58c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDCLK__ELCDIF_DAT_16			0x1f0 0x58c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDCLK__AUDMUX_AUD6_TXFS			0x1f0 0x58c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDCLK__SDMA_DEBUG_CORE_STATE_0		0x1f0 0x58c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDCLK__USBPHY2_BISTOK			0x1f0 0x58c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDSP__EPCD_GDSP				0x1f4 0x590 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDSP__GPIO3_17				0x1f4 0x590 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDSP__EIM_WEIM_D_17			0x1f4 0x590 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDSP__ELCDIF_DAT_17			0x1f4 0x590 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDSP__AUDMUX_AUD6_RXD			0x1f4 0x590 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDSP__SDMA_DEBUG_CORE_STATE_1		0x1f4 0x590 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDSP__USBPHY2_BVALID			0x1f4 0x590 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDOE__EPCD_GDOE				0x1f8 0x594 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDOE__GPIO3_18				0x1f8 0x594 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDOE__EIM_WEIM_D_18			0x1f8 0x594 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDOE__ELCDIF_DAT_18			0x1f8 0x594 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDOE__AUDMUX_AUD6_RXC			0x1f8 0x594 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDOE__SDMA_DEBUG_CORE_STATE_2		0x1f8 0x594 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDOE__USBPHY2_ENDSESSION			0x1f8 0x594 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDRL__EPCD_GDRL				0x1fc 0x598 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDRL__GPIO3_19				0x1fc 0x598 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDRL__EIM_WEIM_D_19			0x1f8 0x598 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDRL__ELCDIF_DAT_19			0x1fc 0x598 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDRL__AUDMUX_AUD6_RXFS			0x1fc 0x598 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDRL__SDMA_DEBUG_CORE_STATE_3		0x1fc 0x598 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDRL__USBPHY2_IDDIG			0x1fc 0x598 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLK__EPCD_SDCLK				0x200 0x59c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLK__GPIO3_20				0x200 0x59c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLK__EIM_WEIM_D_20			0x200 0x59c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLK__ELCDIF_DAT_20			0x200 0x59c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDCLK__AUDMUX_AUD5_TXD			0x200 0x59c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLK__SDMA_DEBUG_BUS_DEVICE_0		0x200 0x59c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLK__USBPHY2_HOSTDISCONNECT		0x200 0x59c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOEZ__EPCD_SDOEZ				0x204 0x5a0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOEZ__GPIO3_21				0x204 0x5a0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOEZ__EIM_WEIM_D_21			0x204 0x5a0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOEZ__ELCDIF_DAT_21			0x204 0x5a0 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOEZ__AUDMUX_AUD5_TXC			0x204 0x5a0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOEZ__SDMA_DEBUG_BUS_DEVICE_1		0x204 0x5a0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOEZ__USBPHY2_TXREADY			0x204 0x5a0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOED__EPCD_SDOED				0x208 0x5a4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOED__GPIO3_22				0x208 0x5a4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOED__EIM_WEIM_D_22			0x208 0x5a4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOED__ELCDIF_DAT_22			0x208 0x5a4 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOED__AUDMUX_AUD5_TXFS			0x208 0x5a4 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOED__SDMA_DEBUG_BUS_DEVICE_2		0x208 0x5a4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOED__USBPHY2_RXVALID			0x208 0x5a4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOE__EPCD_SDOE				0x20c 0x5a8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOE__GPIO3_23				0x20c 0x5a8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOE__EIM_WEIM_D_23			0x20c 0x5a8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOE__ELCDIF_DAT_23			0x20c 0x5a8 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOE__AUDMUX_AUD5_RXD			0x20c 0x5a8 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOE__SDMA_DEBUG_BUS_DEVICE_3		0x20c 0x5a8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOE__USBPHY2_RXACTIVE			0x20c 0x5a8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDLE__EPCD_SDLE				0x210 0x5ac 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDLE__GPIO3_24				0x210 0x5ac 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDLE__EIM_WEIM_D_24			0x210 0x5ac 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDLE__ELCDIF_DAT_8			0x210 0x5ac 0x71c 0x3 0x1
+#define MX50_PAD_EPDC_SDLE__AUDMUX_AUD5_RXC			0x210 0x5ac 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDLE__SDMA_DEBUG_BUS_DEVICE_4		0x210 0x5ac 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDLE__USBPHY2_RXERROR			0x210 0x5ac 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLKN__EPCD_SDCLKN			0x214 0x5b0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLKN__GPIO3_25				0x214 0x5b0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLKN__EIM_WEIM_D_25			0x214 0x5b0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLKN__ELCDIF_DAT_9			0x214 0x5b0 0x720 0x3 0x1
+#define MX50_PAD_EPDC_SDCLKN__AUDMUX_AUD5_RXFS			0x214 0x5b0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLKN__SDMA_DEBUG_BUS_ERROR		0x214 0x5b0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLKN__USBPHY2_SIECLOCK			0x214 0x5b0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDSHR__EPCD_SDSHR				0x218 0x5b4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDSHR__GPIO3_26				0x218 0x5b4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDSHR__EIM_WEIM_D_26			0x218 0x5b4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDSHR__ELCDIF_DAT_10			0x218 0x5b4 0x724 0x3 0x1
+#define MX50_PAD_EPDC_SDSHR__AUDMUX_AUD4_TXD			0x218 0x5b4 0x6c8 0x4 0x1
+#define MX50_PAD_EPDC_SDSHR__SDMA_DEBUG_BUS_RWB			0x218 0x5b4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDSHR__USBPHY2_LINESTATE_0		0x218 0x5b4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCOM__EPCD_PWRCOM			0x21c 0x5b8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCOM__GPIO3_27				0x21c 0x5b8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCOM__EIM_WEIM_D_27			0x21c 0x5b8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCOM__ELCDIF_DAT_11			0x21c 0x5b8 0x728 0x3 0x1
+#define MX50_PAD_EPDC_PWRCOM__AUDMUX_AUD4_TXC			0x21c 0x5b8 0x6d4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCOM__SDMA_DEBUG_CORE_RUN		0x21c 0x5b8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCOM__USBPHY2_LINESTATE_1		0x21c 0x5b8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EPCD_PWRSTAT			0x220 0x5bc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRSTAT__GPIO3_28				0x220 0x5bc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EIM_WEIM_D_28			0x220 0x5bc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_DAT_12			0x220 0x5bc 0x72c 0x3 0x1
+#define MX50_PAD_EPDC_PWRSTAT__AUDMUX_AUD4_TXFS			0x220 0x5bc 0x6d8 0x4 0x1
+#define MX50_PAD_EPDC_PWRSTAT__SDMA_DEBUG_MODE			0x220 0x5bc 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRSTAT__USBPHY2_VBUSVALID		0x220 0x5bc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EPCD_PWRCTRL0			0x224 0x5c0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__GPIO3_29			0x224 0x5c0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EIM_WEIM_D_29			0x224 0x5c0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_DAT_13			0x224 0x5c0 0x730 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__AUDMUX_AUD4_RXD			0x224 0x5c0 0x6c4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__SDMA_DEBUG_RTBUFFER_WRITE	0x224 0x5c0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__USBPHY2_AVALID			0x224 0x5c0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EPCD_PWRCTRL1			0x228 0x5c4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__GPIO3_30			0x228 0x5c4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EIM_WEIM_D_30			0x228 0x5c4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_DAT_14			0x228 0x5c4 0x734 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__AUDMUX_AUD4_RXC			0x228 0x5c4 0x6cc 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__SDMA_DEBUG_YIELD		0x228 0x5c4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__USBPHY1_ONBIST			0x228 0x5c4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EPCD_PWRCTRL2			0x22c 0x5c8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__GPIO3_31			0x22c 0x5c8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EIM_WEIM_D_31			0x22c 0x5c8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_DAT_15			0x22c 0x5c8 0x738 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__AUDMUX_AUD4_RXFS		0x22c 0x5c8 0x6d0 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT_EVENT_0		0x22c 0x5c8 0x7b8 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__USBPHY2_ONBIST			0x22c 0x5c8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EPCD_PWRCTRL3			0x230 0x5cc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__GPIO4_20			0x230 0x5cc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EIM_WEIM_EB_2			0x230 0x5cc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT_EVENT_1		0x230 0x5cc 0x7bc 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL3__USBPHY1_BISTOK			0x230 0x5cc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM0__EPCD_VCOM_0			0x234 0x5d0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM0__GPIO4_21				0x234 0x5d0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM0__EIM_WEIM_EB_3			0x234 0x5d0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_VCOM0__USBPHY2_BISTOK			0x234 0x5d0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM1__EPCD_VCOM_1			0x238 0x5d4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM1__GPIO4_22				0x238 0x5d4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM1__EIM_WEIM_CS_3			0x238 0x5d4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_BDR0__EPCD_BDR_0				0x23c 0x5d8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR0__GPIO4_23				0x23c 0x5d8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR0__ELCDIF_DAT_7			0x23c 0x5d8 0x718 0x3 0x1
+#define MX50_PAD_EPDC_BDR1__EPCD_BDR_1				0x240 0x5dc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR1__GPIO4_24				0x240 0x5dc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR1__ELCDIF_DAT_6			0x240 0x5dc 0x714 0x3 0x1
+#define MX50_PAD_EPDC_SDCE0__EPCD_SDCE_0			0x244 0x5e0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE0__GPIO4_25				0x244 0x5e0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE0__ELCDIF_DAT_5			0x244 0x5e0 0x710 0x3 0x1
+#define MX50_PAD_EPDC_SDCE1__EPCD_SDCE_1			0x248 0x5e4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE1__GPIO4_26				0x248 0x5e4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE1__ELCDIF_DAT_4			0x248 0x5e4 0x70c 0x3 0x0
+#define MX50_PAD_EPDC_SDCE2__EPCD_SDCE_2			0x24c 0x5e8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE2__GPIO4_27				0x24c 0x5e8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT_3			0x24c 0x5e8 0x708 0x3 0x1
+#define MX50_PAD_EPDC_SDCE3__EPCD_SDCE_3			0x250 0x5ec 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE3__GPIO4_28				0x250 0x5ec 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE3__ELCDIF_DAT_2			0x250 0x5ec 0x704 0x3 0x1
+#define MX50_PAD_EPDC_SDCE4__EPCD_SDCE_4			0x254 0x5f0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE4__GPIO4_29				0x254 0x5f0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE4__ELCDIF_DAT_1			0x254 0x5f0 0x700 0x3 0x1
+#define MX50_PAD_EPDC_SDCE5__EPCD_SDCE_5			0x258 0x5f4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE5__GPIO4_30				0x258 0x5f4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE5__ELCDIF_DAT_0			0x258 0x5f4 0x6fc 0x3 0x1
+#define MX50_PAD_EIM_DA0__EIM_WEIM_A_0				0x25c 0x5f8 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA0__GPIO1_0				0x25c 0x5f8 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA0__KPP_COL_4				0x25c 0x5f8 0x790 0x3 0x2
+#define MX50_PAD_EIM_DA0__TPIU_TRACE_0				0x25c 0x5f8 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA0__SRC_BT_CFG1_0				0x25c 0x5f8 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA1__EIM_WEIM_A_1				0x260 0x5fc 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA1__GPIO1_1				0x260 0x5fc 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA1__KPP_ROW_4				0x260 0x5fc 0x7a0 0x3 0x2
+#define MX50_PAD_EIM_DA1__TPIU_TRACE_1				0x260 0x5fc 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA1__SRC_BT_CFG1_1				0x260 0x5fc 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA2__EIM_WEIM_A_2				0x264 0x600 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA2__GPIO1_2				0x264 0x600 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA2__KPP_COL_5				0x264 0x600 0x794 0x3 0x2
+#define MX50_PAD_EIM_DA2__TPIU_TRACE_2				0x264 0x600 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA2__SRC_BT_CFG1_2				0x264 0x600 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA3__EIM_WEIM_A_3				0x268 0x604 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA3__GPIO1_3				0x268 0x604 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA3__KPP_ROW_5				0x268 0x604 0x7a4 0x3 0x2
+#define MX50_PAD_EIM_DA3__TPIU_TRACE_3				0x268 0x604 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA3__SRC_BT_CFG1_3				0x268 0x604 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA4__EIM_WEIM_A_4				0x26c 0x608 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA4__GPIO1_4				0x26c 0x608 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA4__KPP_COL_6				0x26c 0x608 0x798 0x3 0x2
+#define MX50_PAD_EIM_DA4__TPIU_TRACE_4				0x26c 0x608 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA4__SRC_BT_CFG1_4				0x26c 0x608 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA5__EIM_WEIM_A_5				0x270 0x60c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA5__GPIO1_5				0x270 0x60c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA5__KPP_ROW_6				0x270 0x60c 0x7a8 0x3 0x2
+#define MX50_PAD_EIM_DA5__TPIU_TRACE_5				0x270 0x60c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA5__SRC_BT_CFG1_5				0x270 0x60c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA6__EIM_WEIM_A_6				0x274 0x610 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA6__GPIO1_6				0x274 0x610 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA6__KPP_COL_7				0x274 0x610 0x79c 0x3 0x2
+#define MX50_PAD_EIM_DA6__TPIU_TRACE_6				0x274 0x610 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA6__SRC_BT_CFG1_6				0x274 0x610 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA7__EIM_WEIM_A_7				0x278 0x614 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA7__GPIO1_7				0x278 0x614 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA7__KPP_ROW_7				0x278 0x614 0x7ac 0x3 0x2
+#define MX50_PAD_EIM_DA7__TPIU_TRACE_7				0x278 0x614 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA7__SRC_BT_CFG1_7				0x278 0x614 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA8__EIM_WEIM_A_8				0x27c 0x618 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA8__GPIO1_8				0x27c 0x618 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA8__EIM_NANDF_CLE				0x27c 0x618 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA8__TPIU_TRACE_8				0x27c 0x618 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA8__SRC_BT_CFG2_0				0x27c 0x618 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA9__EIM_WEIM_A_9				0x280 0x61c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA9__GPIO1_9				0x280 0x61c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA9__EIM_NANDF_ALE				0x280 0x61c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA9__TPIU_TRACE_9				0x280 0x61c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA9__SRC_BT_CFG2_1				0x280 0x61c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA10__EIM_WEIM_A_10			0x284 0x620 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA10__GPIO1_10				0x284 0x620 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA10__EIM_NANDF_CEN_0			0x284 0x620 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA10__TPIU_TRACE_10			0x284 0x620 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA10__SRC_BT_CFG2_2			0x284 0x620 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA11__EIM_WEIM_A_11			0x288 0x624 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA11__GPIO1_11				0x288 0x624 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA11__EIM_NANDF_CEN_1			0x288 0x624 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA11__TPIU_TRACE_11			0x288 0x624 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA11__SRC_BT_CFG2_3			0x288 0x624 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA12__EIM_WEIM_A_12			0x28c 0x628 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA12__GPIO1_12				0x28c 0x628 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA12__EIM_NANDF_CEN_2			0x28c 0x628 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA12__EPDC_SDCE_6				0x28c 0x628 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA12__TPIU_TRACE_12			0x28c 0x628 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA12__SRC_BT_CFG2_4			0x28c 0x628 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA13__EIM_WEIM_A_13			0x290 0x62c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA13__GPIO1_13				0x290 0x62c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA13__EIM_NANDF_CEN_3			0x290 0x62c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA13__EPDC_SDCE_7				0x290 0x62c 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA13__TPIU_TRACE_13			0x290 0x62c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA13__SRC_BT_CFG2_5			0x290 0x62c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA14__EIM_WEIM_A_14			0x294 0x630 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA14__GPIO1_14				0x294 0x630 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA14__EIM_NANDF_READY0			0x294 0x630 0x7b4 0x2 0x2
+#define MX50_PAD_EIM_DA14__EPDC_SDCE_8				0x294 0x630 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA14__TPIU_TRACE_14			0x294 0x630 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA14__SRC_BT_CFG2_6			0x294 0x630 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA15__EIM_WEIM_A_15			0x298 0x634 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA15__GPIO1_15				0x298 0x634 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA15__EIM_NANDF_DQS			0x298 0x634 0x7b0 0x2 0x2
+#define MX50_PAD_EIM_DA15__EPDC_SDCE_9				0x298 0x634 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA15__TPIU_TRACE_15			0x298 0x634 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA15__SRC_BT_CFG2_7			0x298 0x634 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_CS_2				0x29c 0x638 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS2__GPIO1_16				0x29c 0x638 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_A_27				0x29c 0x638 0x000 0x2 0x0
+#define MX50_PAD_EIM_CS2__TPIU_TRCLK				0x29c 0x638 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS2__SRC_BT_CFG3_0				0x29c 0x638 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS1__EIM_WEIM_CS_1				0x2a0 0x63c 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS1__GPIO1_17				0x2a0 0x63c 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS1__TPIU_TRCTL				0x2a0 0x63c 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS1__SRC_BT_CFG3_1				0x2a0 0x63c 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS0__EIM_WEIM_CS_0				0x2a4 0x640 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS0__GPIO1_18				0x2a4 0x640 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS0__SRC_BT_CFG3_2				0x2a4 0x640 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB0__EIM_WEIM_EB_0				0x2a8 0x644 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB0__GPIO1_19				0x2a8 0x644 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB0__SRC_BT_CFG3_3				0x2a8 0x644 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB1__EIM_WEIM_EB_1				0x2ac 0x648 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB1__GPIO1_20				0x2ac 0x648 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB1__SRC_BT_CFG3_4				0x2ac 0x648 0x000 0x7 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_WAIT			0x2b0 0x64c 0x000 0x0 0x0
+#define MX50_PAD_EIM_WAIT__GPIO1_21				0x2b0 0x64c 0x000 0x1 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_DTACK_B			0x2b0 0x64c 0x000 0x2 0x0
+#define MX50_PAD_EIM_WAIT__SRC_BT_CFG3_5			0x2b0 0x64c 0x000 0x7 0x0
+#define MX50_PAD_EIM_BCLK__EIM_WEIM_BCLK			0x2b4 0x650 0x000 0x0 0x0
+#define MX50_PAD_EIM_BCLK__GPIO1_22				0x2b4 0x650 0x000 0x1 0x0
+#define MX50_PAD_EIM_BCLK__SRC_BT_CFG3_6			0x2b4 0x650 0x000 0x7 0x0
+#define MX50_PAD_EIM_RDY__EIM_WEIM_RDY				0x2b8 0x654 0x000 0x0 0x0
+#define MX50_PAD_EIM_RDY__GPIO1_23				0x2b8 0x654 0x000 0x1 0x0
+#define MX50_PAD_EIM_RDY__SRC_BT_CFG3_7				0x2b8 0x654 0x000 0x7 0x0
+#define MX50_PAD_EIM_OE__EIM_WEIM_OE				0x2bc 0x658 0x000 0x0 0x0
+#define MX50_PAD_EIM_OE__GPIO1_24				0x2bc 0x658 0x000 0x1 0x0
+#define MX50_PAD_EIM_OE__INT_BOOT				0x2bc 0x658 0x000 0x7 0x0
+#define MX50_PAD_EIM_RW__EIM_WEIM_RW				0x2c0 0x65c 0x000 0x0 0x0
+#define MX50_PAD_EIM_RW__GPIO1_25				0x2c0 0x65c 0x000 0x1 0x0
+#define MX50_PAD_EIM_RW__SYSTEM_RST				0x2c0 0x65c 0x000 0x7 0x0
+#define MX50_PAD_EIM_LBA__EIM_WEIM_LBA				0x2c4 0x660 0x000 0x0 0x0
+#define MX50_PAD_EIM_LBA__GPIO1_26				0x2c4 0x660 0x000 0x1 0x0
+#define MX50_PAD_EIM_LBA__TESTER_ACK				0x2c4 0x660 0x000 0x7 0x0
+#define MX50_PAD_EIM_CRE__EIM_WEIM_CRE				0x2c8 0x664 0x000 0x0 0x0
+#define MX50_PAD_EIM_CRE__GPIO1_27				0x2c8 0x664 0x000 0x1 0x0
+
+#endif /* __DTS_IMX50_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx50.dtsi b/arch/arm/boot/dts/nxp/imx/imx50.dtsi
new file mode 100644
index 0000000000000..3d9a9f37f672b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx50.dtsi
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx50-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx5-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		mmc3 = &esdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
+	};
+
+	tzic: tz-interrupt-controller@fffc000 {
+		compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x0fffc000 0x4000>;
+	};
+
+	clocks {
+		ckil {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	usbphy0: usbphy-0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&tzic>;
+		ranges;
+
+		aips1: bus@50000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x10000000>;
+			ranges;
+
+			spba-bus@50000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x50000000 0x40000>;
+				ranges;
+
+				esdhc1: mmc@50004000 {
+					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
+					reg = <0x50004000 0x4000>;
+					interrupts = <1>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc2: mmc@50008000 {
+					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
+					reg = <0x50008000 0x4000>;
+					interrupts = <2>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				uart3: serial@5000c000 {
+					compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+					reg = <0x5000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi1: spi@50010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+					reg = <0x50010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@50014000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx50-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+					reg = <0x50014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				esdhc3: mmc@50020000 {
+					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
+					reg = <0x50020000 0x4000>;
+					interrupts = <3>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc4: mmc@50024000 {
+					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
+					reg = <0x50024000 0x4000>;
+					interrupts = <4>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+			};
+
+			usbotg: usb@53f80000 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@53f80200 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80200 0x0200>;
+				interrupts = <14>;
+				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			gpio1: gpio@53f84000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <50 51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 151 28>;
+			};
+
+			gpio2: gpio@53f88000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f88000 0x4000>;
+				interrupts = <52 53>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 75 8>, <&iomuxc 8 100 8>,
+					      <&iomuxc 16 83 1>, <&iomuxc 17 85 1>,
+					      <&iomuxc 18 87 1>, <&iomuxc 19 84 1>,
+					      <&iomuxc 20 88 1>, <&iomuxc 21 86 1>;
+			};
+
+			gpio3: gpio@53f8c000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f8c000 0x4000>;
+				interrupts = <54 55>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 108 32>;
+			};
+
+			gpio4: gpio@53f90000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <56 57>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0   8  8>, <&iomuxc 8 45 12>,
+					      <&iomuxc 20 140 11>;
+			};
+
+			wdog1: watchdog@53f98000 {
+				compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+			};
+
+			gpt: timer@53fa0000 {
+				compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
+				reg = <0x53fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			iomuxc: iomuxc@53fa8000 {
+				compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+			};
+
+			pwm1: pwm@53fb4000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb4000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@53fb8000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb8000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@53fbc000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@53fc0000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			src: reset-controller@53fd0000 {
+				compatible = "fsl,imx50-src", "fsl,imx51-src";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <75>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@53fd4000{
+				compatible = "fsl,imx50-ccm";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+
+			gpio5: gpio@53fdc000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53fdc000 0x4000>;
+				interrupts = <103 104>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 57 18>, <&iomuxc 18 89 11>;
+			};
+
+			gpio6: gpio@53fe0000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <105 106>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 27 18>, <&iomuxc 18 16 11>;
+			};
+
+			i2c3: i2c@53fec000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x53fec000 0x4000>;
+				interrupts = <64>;
+				clocks = <&clks IMX5_CLK_I2C3_GATE>;
+				status = "disabled";
+			};
+
+			uart4: serial@53ff0000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+					 <&clks IMX5_CLK_UART4_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		aips2: bus@60000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x60000000 0x10000000>;
+			ranges;
+
+			uart5: serial@63f90000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x63f90000 0x4000>;
+				interrupts = <86>;
+				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+					 <&clks IMX5_CLK_UART5_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			owire: owire@63fa4000 {
+				compatible = "fsl,imx50-owire", "fsl,imx21-owire";
+				reg = <0x63fa4000 0x4000>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+				status = "disabled";
+			};
+
+			ecspi2: spi@63fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+				reg = <0x63fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@63fb0000 {
+				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
+				reg = <0x63fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+					 <&clks IMX5_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
+			};
+
+			cspi: spi@63fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
+				reg = <0x63fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@63fc4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc4000 0x4000>;
+				interrupts = <63>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@63fc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc8000 0x4000>;
+				interrupts = <62>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@63fcc000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx50-ssi", "fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+				reg = <0x63fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			audmux: audmux@63fd0000 {
+				compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
+				reg = <0x63fd0000 0x4000>;
+				status = "disabled";
+			};
+
+			fec: ethernet@63fec000 {
+				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+				reg = <0x63fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-apf51.dts b/arch/arm/boot/dts/nxp/imx/imx51-apf51.dts
new file mode 100644
index 0000000000000..ba28ffe06fe23
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-apf51.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
+ *
+ * Based on mx51-babbage.dts
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Armadeus Systems APF51 module";
+	compatible = "armadeus,imx51-apf51", "fsl,imx51";
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x20000000>;
+	};
+
+	clocks {
+		osc {
+			clock-frequency = <33554432>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx51-apf51 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts b/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts
new file mode 100644
index 0000000000000..b61d55ca14676
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Armadeus Systems - <support@armadeus.com>
+ */
+
+/* APF51Dev is a docking board for the APF51 SOM */
+#include "imx51-apf51.dts"
+
+/ {
+	model = "Armadeus Systems APF51Dev docking/development board";
+	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
+
+	backlight {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		compatible = "gpio-backlight";
+		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	disp1 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		display-timings {
+			lw700 {
+				native-mode;
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			display_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-key {
+			label = "user";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			linux,code = <256>; /* BTN_0 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user {
+			label = "Heartbeat";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
+		   <&gpio3 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx51-apf51dev {
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX51_PAD_EIM_EB2__GPIO2_22   0x0C5
+				MX51_PAD_EIM_EB3__GPIO2_23   0x0C5
+				MX51_PAD_EIM_CS4__GPIO2_29   0x100
+				MX51_PAD_NANDF_D13__GPIO3_27 0x0C5
+				MX51_PAD_NANDF_D12__GPIO3_28 0x0C5
+				MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5
+				MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5
+				MX51_PAD_GPIO1_2__GPIO1_2    0x0C5
+				MX51_PAD_GPIO1_3__GPIO1_3    0x0C5
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX51_PAD_NANDF_RB3__ECSPI2_MISO		0x185
+				MX51_PAD_NANDF_D15__ECSPI2_MOSI		0x185
+				MX51_PAD_NANDF_RB2__ECSPI2_SCLK		0x185
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX51_PAD_EIM_D27__I2C2_SCL		0x400001ed
+				MX51_PAD_EIM_D24__I2C2_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_ipu_disp1: ipudisp1grp {
+			fsl,pins = <
+				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			>;
+		};
+	};
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display_in>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts
new file mode 100644
index 0000000000000..a1f9c6a722752
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts
@@ -0,0 +1,726 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Freescale i.MX51 Babbage Board";
+	compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x20000000>;
+	};
+
+	ckih1 {
+		clock-frequency = <22579200>;
+	};
+
+	clk_osc: clk-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_osc_gate: clk-osc-gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_osc>;
+		clocks = <&clk_osc>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	clk_audio: clk-audio {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_audio>;
+		clocks = <&clk_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+
+	clk_usb: clk-usb {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_usb>;
+		clocks = <&clk_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	};
+
+	display1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		port@0 {
+		reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			parallel_display_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
+		};
+	};
+
+	display2: disp2 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb565";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp2>;
+		status = "disabled";
+		display-timings {
+			native-mode = <&timing1>;
+			timing1: claawvga {
+				clock-frequency = <27000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <60>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				hsync-len = <20>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp2>;
+			};
+		};
+	};
+
+	dvi-connector {
+		compatible = "dvi-connector";
+		digital;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-encoder {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&parallel_display_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-diagnostic {
+			label = "diagnostic";
+			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_hub_reset: regulator@0 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbotgreg>;
+			reg = <0>;
+			regulator-name = "hub_reset";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx51-babbage-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx51-babbage-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1reg>;
+		clocks = <&clk_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic: mc13892@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-boot-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	flash: at45db321d@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_audio>;
+		VDDA-supply = <&vdig_reg>;
+		VDDIO-supply = <&vvideo_reg>;
+	};
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ipu_di1_disp2 {
+	remote-endpoint = <&display1_in>;
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 3, KEY_HOME)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_ENTER)
+		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
+		MATRIX_KEY(2, 0, KEY_F6)
+		MATRIX_KEY(2, 1, KEY_F8)
+		MATRIX_KEY(2, 2, KEY_F9)
+		MATRIX_KEY(2, 3, KEY_F10)
+		MATRIX_KEY(3, 0, KEY_F1)
+		MATRIX_KEY(3, 1, KEY_F2)
+		MATRIX_KEY(3, 2, KEY_F3)
+		MATRIX_KEY(3, 3, KEY_POWER)
+	>;
+	status = "okay";
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_hub_reset>;
+	fsl,usbphy = <&usbphy1>;
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb_reg>;
+};
+
+&usbotg {
+	dr_mode = "otg";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	status = "okay";
+};
+
+&iomuxc {
+	imx51-babbage {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
+				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
+				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
+				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
+			>;
+		};
+
+		pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
+			>;
+		};
+
+		pinctrl_clk26mhz_osc: clk26mhzoscgrp {
+			fsl,pins = <
+				MX51_PAD_DI1_PIN12__GPIO3_1		0x85
+			>;
+		};
+
+		pinctrl_clk26mhz_usb: clk26mhzusbgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_D17__GPIO2_1		0x85
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+				MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+				MX51_PAD_GPIO1_0__GPIO1_0		0x100
+				MX51_PAD_GPIO1_1__GPIO1_1		0x100
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+				MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
+				MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
+				MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
+				MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
+				MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
+				MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
+				MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
+				MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
+				MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
+				MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
+				MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
+				MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
+				MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
+				MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
+				MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
+				MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
+				MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
+				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
+				MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
+				MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
+			>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_A27__GPIO2_21		0x5
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_D22__GPIO2_6		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
+				MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+				MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_ipu_disp1: ipudisp1grp {
+			fsl,pins = <
+				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			>;
+		};
+
+		pinctrl_ipu_disp2: ipudisp2grp {
+			fsl,pins = <
+				MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
+				MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
+				MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
+				MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
+				MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
+				MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
+				MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
+				MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
+				MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
+				MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
+				MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
+				MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
+				MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
+				MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
+				MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
+				MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
+				MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
+				MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
+				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+				MX51_PAD_DI_GP4__DI2_PIN15		0x5
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
+				MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
+				MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
+				MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
+				MX51_PAD_KEY_COL0__KEY_COL0		0xe8
+				MX51_PAD_KEY_COL1__KEY_COL1		0xe8
+				MX51_PAD_KEY_COL2__KEY_COL2		0xe8
+				MX51_PAD_KEY_COL3__KEY_COL3		0xe8
+			>;
+		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+				MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
+				MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+				MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+				MX51_PAD_EIM_D27__UART3_RTS		0x1c5
+				MX51_PAD_EIM_D24__UART3_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
+				MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
+				MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
+			>;
+		};
+
+		pinctrl_usbh1reg: usbh1reggrp {
+			fsl,pins = <
+				MX51_PAD_EIM_D21__GPIO2_5		0x85
+			>;
+		};
+
+		pinctrl_usbotgreg: usbotgreggrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_7__GPIO1_7		0x85
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-jsk.dts
new file mode 100644
index 0000000000000..10cae7c3a8791
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-jsk.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include "imx51-digi-connectcore-som.dtsi"
+
+/ {
+	model = "Digi ConnectCore CC(W)-MX51 JSK";
+	compatible = "digi,connectcore-ccxmx51-jsk",
+		     "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire>;
+	status = "okay";
+};
+
+&pmic {
+	fsl,mc13xxx-uses-rtc;
+
+	regulators {
+		vcoincell_reg: vcoincell {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	fsl,usbphy = <&usbphy1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&iomuxc {
+	imx51-digi-connectcore-jsk {
+		pinctrl_owire: owiregrp {
+			fsl,pins = <
+				MX51_PAD_OWIRE_LINE__OWIRE_LINE		0x40000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x1e5
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x1e5
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x1e5
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x1e5
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x1e5
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x1e5
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x1e5
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x1e5
+				MX51_PAD_USBH1_CLK__USBH1_CLK		0x1e5
+				MX51_PAD_USBH1_DIR__USBH1_DIR		0x1e5
+				MX51_PAD_USBH1_NXT__USBH1_NXT		0x1e5
+				MX51_PAD_USBH1_STP__USBH1_STP		0x1e5
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi
new file mode 100644
index 0000000000000..f0809a16a2cea
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Digi ConnectCore CC(W)-MX51";
+	compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x08000000>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13892@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mc13892>;
+		compatible = "fsl,mc13892";
+		spi-max-frequency = <16000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1275000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst { };
+
+			viohi_reg: viohi {
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <3150000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <2600000>;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2750000>;
+				regulator-max-microvolt = <2750000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			gpo2_reg: gpo2 { };
+
+			gpo3_reg: gpo3 { };
+
+			gpo4_reg: gpo4 { };
+
+			pwgt2spi_reg: pwgt2spi {
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	max-frequency = <50000000>;
+	bus-width = <1>;
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cap-sdio-irq;
+	wakeup-source;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&gpo4_reg>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-supply = <&gpo3_reg>;
+	/* Pins shared with LCD2, keep status disabled */
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	mma7455l@1d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mma7455l>;
+		compatible = "fsl,mma7455l";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi_wide";
+	disable-over-current;
+	vbus-supply = <&swbst_reg>;
+	/* Device role is not known, keep status disabled */
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	lan9221: ethernet@5,0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lan9221>;
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <5 0x00000000 0x1000>;
+		fsl,weim-cs-timing = <
+			0x00420081 0x00000000
+			0x32260000 0x00000000
+			0x72080f00 0x00000000
+		>;
+		clocks = <&clks IMX5_CLK_DUMMY>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&gpo2_reg>;
+		vddvario-supply = <&gpo2_reg>;
+	};
+};
+
+&iomuxc {
+	imx51-digi-connectcore-som {
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CLK__SD1_CLK		0x400021d5
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x400020d5
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_2__I2C2_SCL		0x400001ed
+				MX51_PAD_GPIO1_3__I2C2_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2gpiogrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_2__GPIO1_2		0x400001ed
+				MX51_PAD_GPIO1_3__GPIO1_3		0x400001ed
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX51_PAD_NANDF_D0__NANDF_D0		0x80000000
+				MX51_PAD_NANDF_D1__NANDF_D1		0x80000000
+				MX51_PAD_NANDF_D2__NANDF_D2		0x80000000
+				MX51_PAD_NANDF_D3__NANDF_D3		0x80000000
+				MX51_PAD_NANDF_D4__NANDF_D4		0x80000000
+				MX51_PAD_NANDF_D5__NANDF_D5		0x80000000
+				MX51_PAD_NANDF_D6__NANDF_D6		0x80000000
+				MX51_PAD_NANDF_D7__NANDF_D7		0x80000000
+				MX51_PAD_NANDF_ALE__NANDF_ALE		0x80000000
+				MX51_PAD_NANDF_CLE__NANDF_CLE		0x80000000
+				MX51_PAD_NANDF_RE_B__NANDF_RE_B		0x80000000
+				MX51_PAD_NANDF_WE_B__NANDF_WE_B		0x80000000
+				MX51_PAD_NANDF_WP_B__NANDF_WP_B		0x80000000
+				MX51_PAD_NANDF_CS0__NANDF_CS0		0x80000000
+				MX51_PAD_NANDF_RB0__NANDF_RB0		0x80000000
+			>;
+		};
+
+		pinctrl_lan9221: lan9221grp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_9__GPIO1_9		0xe5 /* IRQ */
+			>;
+		};
+
+		pinctrl_mc13892: mc13892grp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_5__GPIO1_5		0xe5 /* IRQ */
+			>;
+		};
+
+		pinctrl_mma7455l: mma7455lgrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_7__GPIO1_7		0xe5 /* IRQ1 */
+				MX51_PAD_GPIO1_6__GPIO1_6		0xe5 /* IRQ2 */
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_DA0__EIM_DA0		0x80000000
+				MX51_PAD_EIM_DA1__EIM_DA1		0x80000000
+				MX51_PAD_EIM_DA2__EIM_DA2		0x80000000
+				MX51_PAD_EIM_DA3__EIM_DA3		0x80000000
+				MX51_PAD_EIM_DA4__EIM_DA4		0x80000000
+				MX51_PAD_EIM_DA5__EIM_DA5		0x80000000
+				MX51_PAD_EIM_DA6__EIM_DA6		0x80000000
+				MX51_PAD_EIM_DA7__EIM_DA7		0x80000000
+				MX51_PAD_EIM_DA8__EIM_DA8		0x80000000
+				MX51_PAD_EIM_DA9__EIM_DA9		0x80000000
+				MX51_PAD_EIM_DA10__EIM_DA10		0x80000000
+				MX51_PAD_EIM_DA11__EIM_DA11		0x80000000
+				MX51_PAD_EIM_DA12__EIM_DA12		0x80000000
+				MX51_PAD_EIM_DA13__EIM_DA13		0x80000000
+				MX51_PAD_EIM_DA14__EIM_DA14		0x80000000
+				MX51_PAD_EIM_DA15__EIM_DA15		0x80000000
+				MX51_PAD_EIM_A16__EIM_A16		0x80000000
+				MX51_PAD_EIM_A17__EIM_A17		0x80000000
+				MX51_PAD_EIM_A18__EIM_A18		0x80000000
+				MX51_PAD_EIM_A19__EIM_A19		0x80000000
+				MX51_PAD_EIM_A20__EIM_A20		0x80000000
+				MX51_PAD_EIM_A21__EIM_A21		0x80000000
+				MX51_PAD_EIM_A22__EIM_A22		0x80000000
+				MX51_PAD_EIM_A23__EIM_A23		0x80000000
+				MX51_PAD_EIM_A24__EIM_A24		0x80000000
+				MX51_PAD_EIM_A25__EIM_A25		0x80000000
+				MX51_PAD_EIM_A26__EIM_A26		0x80000000
+				MX51_PAD_EIM_A27__EIM_A27		0x80000000
+				MX51_PAD_EIM_D16__EIM_D16		0x80000000
+				MX51_PAD_EIM_D17__EIM_D17		0x80000000
+				MX51_PAD_EIM_D18__EIM_D18		0x80000000
+				MX51_PAD_EIM_D19__EIM_D19		0x80000000
+				MX51_PAD_EIM_D20__EIM_D20		0x80000000
+				MX51_PAD_EIM_D21__EIM_D21		0x80000000
+				MX51_PAD_EIM_D22__EIM_D22		0x80000000
+				MX51_PAD_EIM_D23__EIM_D23		0x80000000
+				MX51_PAD_EIM_D24__EIM_D24		0x80000000
+				MX51_PAD_EIM_D25__EIM_D25		0x80000000
+				MX51_PAD_EIM_D26__EIM_D26		0x80000000
+				MX51_PAD_EIM_D27__EIM_D27		0x80000000
+				MX51_PAD_EIM_D28__EIM_D28		0x80000000
+				MX51_PAD_EIM_D29__EIM_D29		0x80000000
+				MX51_PAD_EIM_D30__EIM_D30		0x80000000
+				MX51_PAD_EIM_D31__EIM_D31		0x80000000
+				MX51_PAD_EIM_OE__EIM_OE			0x80000000
+				MX51_PAD_EIM_DTACK__EIM_DTACK		0x80000000
+				MX51_PAD_EIM_LBA__EIM_LBA		0x80000000
+				MX51_PAD_EIM_CS5__EIM_CS5		0x80000000 /* CS5 */
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
new file mode 100644
index 0000000000000..c2a929ba8cebd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx51.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,cpuimx51", "fsl,imx51";
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x10000000>; /* 256M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsc2007: tsc2007@49 {
+		compatible = "ti,tsc2007";
+		gpios = <&gpio4 0 1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <0x0 0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007_1>;
+		reg = <0x49>;
+		ti,x-plate-ohms = <180>;
+	};
+};
+
+&iomuxc {
+	imx51-eukrea {
+		pinctrl_tsc2007_1: tsc2007grp-1 {
+			fsl,pins = <
+				MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
+				MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__I2C1_SCL		0x400001ed
+				MX51_PAD_SD2_CLK__I2C1_SDA		0x400001ed
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts
new file mode 100644
index 0000000000000..b6d931e96a8fd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/dts-v1/;
+#include "imx51-eukrea-cpuimx51.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
+
+	clocks {
+		clk24M: can_clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys_1>;
+
+		button-1 {
+			label = "BP1";
+			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+			wakeup-source;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_can: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "CAN_RST";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <20000>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx51-eukrea-tlv320aic23";
+		ssi-controller = <&ssi2>;
+		fsl,mux-int-port = <2>;
+		fsl,mux-ext-port = <3>;
+	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+		#phy-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can0: can@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can>;
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		clocks = <&clk24M>;
+		spi-max-frequency = <10000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&reg_can>;
+	};
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx51-eukrea {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
+				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
+				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
+				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
+			>;
+		};
+
+
+		pinctrl_can: cangrp {
+			fsl,pins = <
+				MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x80000000	/* nReset */
+				MX51_PAD_GPIO1_1__GPIO1_1		0x80000000	/* IRQ */
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+				MX51_PAD_CSPI1_SS0__GPIO4_24		0x80000000 	/* CS0 */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3_rtscts: uart3rtsctsgrp {
+			fsl,pins = <
+				MX51_PAD_KEY_COL4__UART3_RTS		0x1c5
+				MX51_PAD_KEY_COL5__UART3_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_backlight_1: backlightgrp-1 {
+			fsl,pins = <
+				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
+			>;
+		};
+
+		pinctrl_esdhc1_cd: esdhc1_cd {
+			fsl,pins = <
+				MX51_PAD_GPIO1_0__GPIO1_0 0xd5
+			>;
+		};
+
+		pinctrl_gpiokeys_1: gpiokeysgrp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
+			>;
+		};
+
+		pinctrl_gpioled: gpioledgrp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
+			>;
+		};
+
+		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+			fsl,pins = <
+				MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX51_PAD_USBH1_CLK__USBH1_CLK     0x1e5
+				MX51_PAD_USBH1_DIR__USBH1_DIR     0x1e5
+				MX51_PAD_USBH1_NXT__USBH1_NXT     0x1e5
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
+				MX51_PAD_USBH1_STP__USBH1_STP     0x1e5
+			>;
+		};
+
+		pinctrl_usbh1_vbus: usbh1-vbusgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
+			>;
+		};
+	};
+};
+
+&ssi2 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	fsl,usbphy = <&usbphy1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	phy_type = "utmi_wide";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1_vbus>;
+	reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx51-pinfunc.h
new file mode 100644
index 0000000000000..910e0ec50ef3e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-pinfunc.h
@@ -0,0 +1,768 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX51_PINFUNC_H
+#define __DTS_IMX51_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX51_PAD_EIM_D16__AUD4_RXFS			0x05c 0x3f0 0x000 0x5 0x0
+#define MX51_PAD_EIM_D16__AUD5_TXD			0x05c 0x3f0 0x8d8 0x7 0x0
+#define MX51_PAD_EIM_D16__EIM_D16			0x05c 0x3f0 0x000 0x0 0x0
+#define MX51_PAD_EIM_D16__GPIO2_0			0x05c 0x3f0 0x000 0x1 0x0
+#define MX51_PAD_EIM_D16__I2C1_SDA			0x05c 0x3f0 0x9b4 0x4 0x0
+#define MX51_PAD_EIM_D16__UART2_CTS			0x05c 0x3f0 0x000 0x3 0x0
+#define MX51_PAD_EIM_D16__USBH2_DATA0			0x05c 0x3f0 0x000 0x2 0x0
+#define MX51_PAD_EIM_D17__AUD5_RXD			0x060 0x3f4 0x8d4 0x7 0x0
+#define MX51_PAD_EIM_D17__EIM_D17			0x060 0x3f4 0x000 0x0 0x0
+#define MX51_PAD_EIM_D17__GPIO2_1			0x060 0x3f4 0x000 0x1 0x0
+#define MX51_PAD_EIM_D17__UART2_RXD			0x060 0x3f4 0x9ec 0x3 0x0
+#define MX51_PAD_EIM_D17__UART3_CTS			0x060 0x3f4 0x000 0x4 0x0
+#define MX51_PAD_EIM_D17__USBH2_DATA1			0x060 0x3f4 0x000 0x2 0x0
+#define MX51_PAD_EIM_D18__AUD5_TXC			0x064 0x3f8 0x8e4 0x7 0x0
+#define MX51_PAD_EIM_D18__EIM_D18			0x064 0x3f8 0x000 0x0 0x0
+#define MX51_PAD_EIM_D18__GPIO2_2			0x064 0x3f8 0x000 0x1 0x0
+#define MX51_PAD_EIM_D18__UART2_TXD			0x064 0x3f8 0x000 0x3 0x0
+#define MX51_PAD_EIM_D18__UART3_RTS			0x064 0x3f8 0x9f0 0x4 0x1
+#define MX51_PAD_EIM_D18__USBH2_DATA2			0x064 0x3f8 0x000 0x2 0x0
+#define MX51_PAD_EIM_D19__AUD4_RXC			0x068 0x3fc 0x000 0x5 0x0
+#define MX51_PAD_EIM_D19__AUD5_TXFS			0x068 0x3fc 0x8e8 0x7 0x0
+#define MX51_PAD_EIM_D19__EIM_D19			0x068 0x3fc 0x000 0x0 0x0
+#define MX51_PAD_EIM_D19__GPIO2_3			0x068 0x3fc 0x000 0x1 0x0
+#define MX51_PAD_EIM_D19__I2C1_SCL			0x068 0x3fc 0x9b0 0x4 0x0
+#define MX51_PAD_EIM_D19__UART2_RTS			0x068 0x3fc 0x9e8 0x3 0x1
+#define MX51_PAD_EIM_D19__USBH2_DATA3			0x068 0x3fc 0x000 0x2 0x0
+#define MX51_PAD_EIM_D20__AUD4_TXD			0x06c 0x400 0x8c8 0x5 0x0
+#define MX51_PAD_EIM_D20__EIM_D20			0x06c 0x400 0x000 0x0 0x0
+#define MX51_PAD_EIM_D20__GPIO2_4			0x06c 0x400 0x000 0x1 0x0
+#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB		0x06c 0x400 0x000 0x4 0x0
+#define MX51_PAD_EIM_D20__USBH2_DATA4			0x06c 0x400 0x000 0x2 0x0
+#define MX51_PAD_EIM_D21__AUD4_RXD			0x070 0x404 0x8c4 0x5 0x0
+#define MX51_PAD_EIM_D21__EIM_D21			0x070 0x404 0x000 0x0 0x0
+#define MX51_PAD_EIM_D21__GPIO2_5			0x070 0x404 0x000 0x1 0x0
+#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB		0x070 0x404 0x000 0x3 0x0
+#define MX51_PAD_EIM_D21__USBH2_DATA5			0x070 0x404 0x000 0x2 0x0
+#define MX51_PAD_EIM_D22__AUD4_TXC			0x074 0x408 0x8cc 0x5 0x0
+#define MX51_PAD_EIM_D22__EIM_D22			0x074 0x408 0x000 0x0 0x0
+#define MX51_PAD_EIM_D22__GPIO2_6			0x074 0x408 0x000 0x1 0x0
+#define MX51_PAD_EIM_D22__USBH2_DATA6			0x074 0x408 0x000 0x2 0x0
+#define MX51_PAD_EIM_D23__AUD4_TXFS			0x078 0x40c 0x8d0 0x5 0x0
+#define MX51_PAD_EIM_D23__EIM_D23			0x078 0x40c 0x000 0x0 0x0
+#define MX51_PAD_EIM_D23__GPIO2_7			0x078 0x40c 0x000 0x1 0x0
+#define MX51_PAD_EIM_D23__SPDIF_OUT1			0x078 0x40c 0x000 0x4 0x0
+#define MX51_PAD_EIM_D23__USBH2_DATA7			0x078 0x40c 0x000 0x2 0x0
+#define MX51_PAD_EIM_D24__AUD6_RXFS			0x07c 0x410 0x8f8 0x5 0x0
+#define MX51_PAD_EIM_D24__EIM_D24			0x07c 0x410 0x000 0x0 0x0
+#define MX51_PAD_EIM_D24__GPIO2_8			0x07c 0x410 0x000 0x1 0x0
+#define MX51_PAD_EIM_D24__I2C2_SDA			0x07c 0x410 0x9bc 0x4 0x0
+#define MX51_PAD_EIM_D24__UART3_CTS			0x07c 0x410 0x000 0x3 0x0
+#define MX51_PAD_EIM_D24__USBOTG_DATA0			0x07c 0x410 0x000 0x2 0x0
+#define MX51_PAD_EIM_D25__EIM_D25			0x080 0x414 0x000 0x0 0x0
+#define MX51_PAD_EIM_D25__KEY_COL6			0x080 0x414 0x9c8 0x1 0x0
+#define MX51_PAD_EIM_D25__UART2_CTS			0x080 0x414 0x000 0x4 0x0
+#define MX51_PAD_EIM_D25__UART3_RXD			0x080 0x414 0x9f4 0x3 0x0
+#define MX51_PAD_EIM_D25__USBOTG_DATA1			0x080 0x414 0x000 0x2 0x0
+#define MX51_PAD_EIM_D26__EIM_D26			0x084 0x418 0x000 0x0 0x0
+#define MX51_PAD_EIM_D26__KEY_COL7			0x084 0x418 0x9cc 0x1 0x0
+#define MX51_PAD_EIM_D26__UART2_RTS			0x084 0x418 0x9e8 0x4 0x3
+#define MX51_PAD_EIM_D26__UART3_TXD			0x084 0x418 0x000 0x3 0x0
+#define MX51_PAD_EIM_D26__USBOTG_DATA2			0x084 0x418 0x000 0x2 0x0
+#define MX51_PAD_EIM_D27__AUD6_RXC			0x088 0x41c 0x8f4 0x5 0x0
+#define MX51_PAD_EIM_D27__EIM_D27			0x088 0x41c 0x000 0x0 0x0
+#define MX51_PAD_EIM_D27__GPIO2_9			0x088 0x41c 0x000 0x1 0x0
+#define MX51_PAD_EIM_D27__I2C2_SCL			0x088 0x41c 0x9b8 0x4 0x0
+#define MX51_PAD_EIM_D27__UART3_RTS			0x088 0x41c 0x9f0 0x3 0x3
+#define MX51_PAD_EIM_D27__USBOTG_DATA3			0x088 0x41c 0x000 0x2 0x0
+#define MX51_PAD_EIM_D28__AUD6_TXD			0x08c 0x420 0x8f0 0x5 0x0
+#define MX51_PAD_EIM_D28__EIM_D28			0x08c 0x420 0x000 0x0 0x0
+#define MX51_PAD_EIM_D28__KEY_ROW4			0x08c 0x420 0x9d0 0x1 0x0
+#define MX51_PAD_EIM_D28__USBOTG_DATA4			0x08c 0x420 0x000 0x2 0x0
+#define MX51_PAD_EIM_D29__AUD6_RXD			0x090 0x424 0x8ec 0x5 0x0
+#define MX51_PAD_EIM_D29__EIM_D29			0x090 0x424 0x000 0x0 0x0
+#define MX51_PAD_EIM_D29__KEY_ROW5			0x090 0x424 0x9d4 0x1 0x0
+#define MX51_PAD_EIM_D29__USBOTG_DATA5			0x090 0x424 0x000 0x2 0x0
+#define MX51_PAD_EIM_D30__AUD6_TXC			0x094 0x428 0x8fc 0x5 0x0
+#define MX51_PAD_EIM_D30__EIM_D30			0x094 0x428 0x000 0x0 0x0
+#define MX51_PAD_EIM_D30__KEY_ROW6			0x094 0x428 0x9d8 0x1 0x0
+#define MX51_PAD_EIM_D30__USBOTG_DATA6			0x094 0x428 0x000 0x2 0x0
+#define MX51_PAD_EIM_D31__AUD6_TXFS			0x098 0x42c 0x900 0x5 0x0
+#define MX51_PAD_EIM_D31__EIM_D31			0x098 0x42c 0x000 0x0 0x0
+#define MX51_PAD_EIM_D31__KEY_ROW7			0x098 0x42c 0x9dc 0x1 0x0
+#define MX51_PAD_EIM_D31__USBOTG_DATA7			0x098 0x42c 0x000 0x2 0x0
+#define MX51_PAD_EIM_A16__EIM_A16			0x09c 0x430 0x000 0x0 0x0
+#define MX51_PAD_EIM_A16__GPIO2_10			0x09c 0x430 0x000 0x1 0x0
+#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0			0x09c 0x430 0x000 0x7 0x0
+#define MX51_PAD_EIM_A17__EIM_A17			0x0a0 0x434 0x000 0x0 0x0
+#define MX51_PAD_EIM_A17__GPIO2_11			0x0a0 0x434 0x000 0x1 0x0
+#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1			0x0a0 0x434 0x000 0x7 0x0
+#define MX51_PAD_EIM_A18__BOOT_LPB0			0x0a4 0x438 0x000 0x7 0x0
+#define MX51_PAD_EIM_A18__EIM_A18			0x0a4 0x438 0x000 0x0 0x0
+#define MX51_PAD_EIM_A18__GPIO2_12			0x0a4 0x438 0x000 0x1 0x0
+#define MX51_PAD_EIM_A19__BOOT_LPB1			0x0a8 0x43c 0x000 0x7 0x0
+#define MX51_PAD_EIM_A19__EIM_A19			0x0a8 0x43c 0x000 0x0 0x0
+#define MX51_PAD_EIM_A19__GPIO2_13			0x0a8 0x43c 0x000 0x1 0x0
+#define MX51_PAD_EIM_A20__BOOT_UART_SRC0		0x0ac 0x440 0x000 0x7 0x0
+#define MX51_PAD_EIM_A20__EIM_A20			0x0ac 0x440 0x000 0x0 0x0
+#define MX51_PAD_EIM_A20__GPIO2_14			0x0ac 0x440 0x000 0x1 0x0
+#define MX51_PAD_EIM_A21__BOOT_UART_SRC1		0x0b0 0x444 0x000 0x7 0x0
+#define MX51_PAD_EIM_A21__EIM_A21			0x0b0 0x444 0x000 0x0 0x0
+#define MX51_PAD_EIM_A21__GPIO2_15			0x0b0 0x444 0x000 0x1 0x0
+#define MX51_PAD_EIM_A22__EIM_A22			0x0b4 0x448 0x000 0x0 0x0
+#define MX51_PAD_EIM_A22__GPIO2_16			0x0b4 0x448 0x000 0x1 0x0
+#define MX51_PAD_EIM_A23__BOOT_HPN_EN			0x0b8 0x44c 0x000 0x7 0x0
+#define MX51_PAD_EIM_A23__EIM_A23			0x0b8 0x44c 0x000 0x0 0x0
+#define MX51_PAD_EIM_A23__GPIO2_17			0x0b8 0x44c 0x000 0x1 0x0
+#define MX51_PAD_EIM_A24__EIM_A24			0x0bc 0x450 0x000 0x0 0x0
+#define MX51_PAD_EIM_A24__GPIO2_18			0x0bc 0x450 0x000 0x1 0x0
+#define MX51_PAD_EIM_A24__USBH2_CLK			0x0bc 0x450 0x000 0x2 0x0
+#define MX51_PAD_EIM_A25__DISP1_PIN4			0x0c0 0x454 0x000 0x6 0x0
+#define MX51_PAD_EIM_A25__EIM_A25			0x0c0 0x454 0x000 0x0 0x0
+#define MX51_PAD_EIM_A25__GPIO2_19			0x0c0 0x454 0x000 0x1 0x0
+#define MX51_PAD_EIM_A25__USBH2_DIR			0x0c0 0x454 0x000 0x2 0x0
+#define MX51_PAD_EIM_A26__CSI1_DATA_EN			0x0c4 0x458 0x9a0 0x5 0x0
+#define MX51_PAD_EIM_A26__DISP2_EXT_CLK			0x0c4 0x458 0x908 0x6 0x0
+#define MX51_PAD_EIM_A26__EIM_A26			0x0c4 0x458 0x000 0x0 0x0
+#define MX51_PAD_EIM_A26__GPIO2_20			0x0c4 0x458 0x000 0x1 0x0
+#define MX51_PAD_EIM_A26__USBH2_STP			0x0c4 0x458 0x000 0x2 0x0
+#define MX51_PAD_EIM_A27__CSI2_DATA_EN			0x0c8 0x45c 0x99c 0x5 0x0
+#define MX51_PAD_EIM_A27__DISP1_PIN1			0x0c8 0x45c 0x9a4 0x6 0x0
+#define MX51_PAD_EIM_A27__EIM_A27			0x0c8 0x45c 0x000 0x0 0x0
+#define MX51_PAD_EIM_A27__GPIO2_21			0x0c8 0x45c 0x000 0x1 0x0
+#define MX51_PAD_EIM_A27__USBH2_NXT			0x0c8 0x45c 0x000 0x2 0x0
+#define MX51_PAD_EIM_EB0__EIM_EB0			0x0cc 0x460 0x000 0x0 0x0
+#define MX51_PAD_EIM_EB1__EIM_EB1			0x0d0 0x464 0x000 0x0 0x0
+#define MX51_PAD_EIM_EB2__AUD5_RXFS			0x0d4 0x468 0x8e0 0x6 0x0
+#define MX51_PAD_EIM_EB2__CSI1_D2			0x0d4 0x468 0x000 0x5 0x0
+#define MX51_PAD_EIM_EB2__EIM_EB2			0x0d4 0x468 0x000 0x0 0x0
+#define MX51_PAD_EIM_EB2__FEC_MDIO			0x0d4 0x468 0x954 0x3 0x0
+#define MX51_PAD_EIM_EB2__GPIO2_22			0x0d4 0x468 0x000 0x1 0x0
+#define MX51_PAD_EIM_EB2__GPT_CMPOUT1			0x0d4 0x468 0x000 0x7 0x0
+#define MX51_PAD_EIM_EB3__AUD5_RXC			0x0d8 0x46c 0x8dc 0x6 0x0
+#define MX51_PAD_EIM_EB3__CSI1_D3			0x0d8 0x46c 0x000 0x5 0x0
+#define MX51_PAD_EIM_EB3__EIM_EB3			0x0d8 0x46c 0x000 0x0 0x0
+#define MX51_PAD_EIM_EB3__FEC_RDATA1			0x0d8 0x46c 0x95c 0x3 0x0
+#define MX51_PAD_EIM_EB3__GPIO2_23			0x0d8 0x46c 0x000 0x1 0x0
+#define MX51_PAD_EIM_EB3__GPT_CMPOUT2			0x0d8 0x46c 0x000 0x7 0x0
+#define MX51_PAD_EIM_OE__EIM_OE				0x0dc 0x470 0x000 0x0 0x0
+#define MX51_PAD_EIM_OE__GPIO2_24			0x0dc 0x470 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS0__EIM_CS0			0x0e0 0x474 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS0__GPIO2_25			0x0e0 0x474 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS1__EIM_CS1			0x0e4 0x478 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS1__GPIO2_26			0x0e4 0x478 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS2__AUD5_TXD			0x0e8 0x47c 0x8d8 0x6 0x1
+#define MX51_PAD_EIM_CS2__CSI1_D4			0x0e8 0x47c 0x000 0x5 0x0
+#define MX51_PAD_EIM_CS2__EIM_CS2			0x0e8 0x47c 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS2__FEC_RDATA2			0x0e8 0x47c 0x960 0x3 0x0
+#define MX51_PAD_EIM_CS2__GPIO2_27			0x0e8 0x47c 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS2__USBOTG_STP			0x0e8 0x47c 0x000 0x2 0x0
+#define MX51_PAD_EIM_CS3__AUD5_RXD			0x0ec 0x480 0x8d4 0x6 0x1
+#define MX51_PAD_EIM_CS3__CSI1_D5			0x0ec 0x480 0x000 0x5 0x0
+#define MX51_PAD_EIM_CS3__EIM_CS3			0x0ec 0x480 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS3__FEC_RDATA3			0x0ec 0x480 0x964 0x3 0x0
+#define MX51_PAD_EIM_CS3__GPIO2_28			0x0ec 0x480 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS3__USBOTG_NXT			0x0ec 0x480 0x000 0x2 0x0
+#define MX51_PAD_EIM_CS4__AUD5_TXC			0x0f0 0x484 0x8e4 0x6 0x1
+#define MX51_PAD_EIM_CS4__CSI1_D6			0x0f0 0x484 0x000 0x5 0x0
+#define MX51_PAD_EIM_CS4__EIM_CS4			0x0f0 0x484 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS4__FEC_RX_ER			0x0f0 0x484 0x970 0x3 0x0
+#define MX51_PAD_EIM_CS4__GPIO2_29			0x0f0 0x484 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS4__USBOTG_CLK			0x0f0 0x484 0x000 0x2 0x0
+#define MX51_PAD_EIM_CS5__AUD5_TXFS			0x0f4 0x488 0x8e8 0x6 0x1
+#define MX51_PAD_EIM_CS5__CSI1_D7			0x0f4 0x488 0x000 0x5 0x0
+#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK			0x0f4 0x488 0x904 0x4 0x0
+#define MX51_PAD_EIM_CS5__EIM_CS5			0x0f4 0x488 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS5__FEC_CRS			0x0f4 0x488 0x950 0x3 0x0
+#define MX51_PAD_EIM_CS5__GPIO2_30			0x0f4 0x488 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS5__USBOTG_DIR			0x0f4 0x488 0x000 0x2 0x0
+#define MX51_PAD_EIM_DTACK__EIM_DTACK			0x0f8 0x48c 0x000 0x0 0x0
+#define MX51_PAD_EIM_DTACK__GPIO2_31			0x0f8 0x48c 0x000 0x1 0x0
+#define MX51_PAD_EIM_LBA__EIM_LBA			0x0fc 0x494 0x000 0x0 0x0
+#define MX51_PAD_EIM_LBA__GPIO3_1			0x0fc 0x494 0x978 0x1 0x0
+#define MX51_PAD_EIM_CRE__EIM_CRE			0x100 0x4a0 0x000 0x0 0x0
+#define MX51_PAD_EIM_CRE__GPIO3_2			0x100 0x4a0 0x97c 0x1 0x0
+#define MX51_PAD_DRAM_CS1__DRAM_CS1			0x104 0x4d0 0x000 0x0 0x0
+#define MX51_PAD_NANDF_WE_B__GPIO3_3			0x108 0x4e4 0x980 0x3 0x0
+#define MX51_PAD_NANDF_WE_B__NANDF_WE_B			0x108 0x4e4 0x000 0x0 0x0
+#define MX51_PAD_NANDF_WE_B__PATA_DIOW			0x108 0x4e4 0x000 0x1 0x0
+#define MX51_PAD_NANDF_WE_B__SD3_DATA0			0x108 0x4e4 0x93c 0x2 0x0
+#define MX51_PAD_NANDF_RE_B__GPIO3_4			0x10c 0x4e8 0x984 0x3 0x0
+#define MX51_PAD_NANDF_RE_B__NANDF_RE_B			0x10c 0x4e8 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RE_B__PATA_DIOR			0x10c 0x4e8 0x000 0x1 0x0
+#define MX51_PAD_NANDF_RE_B__SD3_DATA1			0x10c 0x4e8 0x940 0x2 0x0
+#define MX51_PAD_NANDF_ALE__GPIO3_5			0x110 0x4ec 0x988 0x3 0x0
+#define MX51_PAD_NANDF_ALE__NANDF_ALE			0x110 0x4ec 0x000 0x0 0x0
+#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN		0x110 0x4ec 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CLE__GPIO3_6			0x114 0x4f0 0x98c 0x3 0x0
+#define MX51_PAD_NANDF_CLE__NANDF_CLE			0x114 0x4f0 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CLE__PATA_RESET_B		0x114 0x4f0 0x000 0x1 0x0
+#define MX51_PAD_NANDF_WP_B__GPIO3_7			0x118 0x4f4 0x990 0x3 0x0
+#define MX51_PAD_NANDF_WP_B__NANDF_WP_B			0x118 0x4f4 0x000 0x0 0x0
+#define MX51_PAD_NANDF_WP_B__PATA_DMACK			0x118 0x4f4 0x000 0x1 0x0
+#define MX51_PAD_NANDF_WP_B__SD3_DATA2			0x118 0x4f4 0x944 0x2 0x0
+#define MX51_PAD_NANDF_RB0__ECSPI2_SS1			0x11c 0x4f8 0x930 0x5 0x0
+#define MX51_PAD_NANDF_RB0__GPIO3_8			0x11c 0x4f8 0x994 0x3 0x0
+#define MX51_PAD_NANDF_RB0__NANDF_RB0			0x11c 0x4f8 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RB0__PATA_DMARQ			0x11c 0x4f8 0x000 0x1 0x0
+#define MX51_PAD_NANDF_RB0__SD3_DATA3			0x11c 0x4f8 0x948 0x2 0x0
+#define MX51_PAD_NANDF_RB1__CSPI_MOSI			0x120 0x4fc 0x91c 0x6 0x0
+#define MX51_PAD_NANDF_RB1__ECSPI2_RDY			0x120 0x4fc 0x000 0x2 0x0
+#define MX51_PAD_NANDF_RB1__GPIO3_9			0x120 0x4fc 0x000 0x3 0x0
+#define MX51_PAD_NANDF_RB1__NANDF_RB1			0x120 0x4fc 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RB1__PATA_IORDY			0x120 0x4fc 0x000 0x1 0x0
+#define MX51_PAD_NANDF_RB1__SD4_CMD			0x120 0x4fc 0x000 0x5 0x0
+#define MX51_PAD_NANDF_RB2__DISP2_WAIT			0x124 0x500 0x9a8 0x5 0x0
+#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK			0x124 0x500 0x000 0x2 0x0
+#define MX51_PAD_NANDF_RB2__FEC_COL			0x124 0x500 0x94c 0x1 0x0
+#define MX51_PAD_NANDF_RB2__GPIO3_10			0x124 0x500 0x000 0x3 0x0
+#define MX51_PAD_NANDF_RB2__NANDF_RB2			0x124 0x500 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RB2__USBH3_H3_DP			0x124 0x500 0x000 0x7 0x0
+#define MX51_PAD_NANDF_RB2__USBH3_NXT			0x124 0x500 0xa20 0x6 0x0
+#define MX51_PAD_NANDF_RB3__DISP1_WAIT			0x128 0x504 0x000 0x5 0x0
+#define MX51_PAD_NANDF_RB3__ECSPI2_MISO			0x128 0x504 0x000 0x2 0x0
+#define MX51_PAD_NANDF_RB3__FEC_RX_CLK			0x128 0x504 0x968 0x1 0x0
+#define MX51_PAD_NANDF_RB3__GPIO3_11			0x128 0x504 0x000 0x3 0x0
+#define MX51_PAD_NANDF_RB3__NANDF_RB3			0x128 0x504 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RB3__USBH3_CLK			0x128 0x504 0x9f8 0x6 0x0
+#define MX51_PAD_NANDF_RB3__USBH3_H3_DM			0x128 0x504 0x000 0x7 0x0
+#define MX51_PAD_GPIO_NAND__GPIO_NAND			0x12c 0x514 0x998 0x0 0x0
+#define MX51_PAD_GPIO_NAND__PATA_INTRQ			0x12c 0x514 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS0__GPIO3_16			0x130 0x518 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS0__NANDF_CS0			0x130 0x518 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS1__GPIO3_17			0x134 0x51c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS1__NANDF_CS1			0x134 0x51c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS2__CSPI_SCLK			0x138 0x520 0x914 0x6 0x0
+#define MX51_PAD_NANDF_CS2__FEC_TX_ER			0x138 0x520 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS2__GPIO3_18			0x138 0x520 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS2__NANDF_CS2			0x138 0x520 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS2__PATA_CS_0			0x138 0x520 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS2__SD4_CLK			0x138 0x520 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS2__USBH3_H1_DP			0x138 0x520 0x000 0x7 0x0
+#define MX51_PAD_NANDF_CS3__FEC_MDC			0x13c 0x524 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS3__GPIO3_19			0x13c 0x524 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS3__NANDF_CS3			0x13c 0x524 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS3__PATA_CS_1			0x13c 0x524 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS3__SD4_DAT0			0x13c 0x524 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS3__USBH3_H1_DM			0x13c 0x524 0x000 0x7 0x0
+#define MX51_PAD_NANDF_CS4__FEC_TDATA1			0x140 0x528 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS4__GPIO3_20			0x140 0x528 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS4__NANDF_CS4			0x140 0x528 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS4__PATA_DA_0			0x140 0x528 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS4__SD4_DAT1			0x140 0x528 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS4__USBH3_STP			0x140 0x528 0xa24 0x7 0x0
+#define MX51_PAD_NANDF_CS5__FEC_TDATA2			0x144 0x52c 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS5__GPIO3_21			0x144 0x52c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS5__NANDF_CS5			0x144 0x52c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS5__PATA_DA_1			0x144 0x52c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS5__SD4_DAT2			0x144 0x52c 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS5__USBH3_DIR			0x144 0x52c 0xa1c 0x7 0x0
+#define MX51_PAD_NANDF_CS6__CSPI_SS3			0x148 0x530 0x928 0x7 0x0
+#define MX51_PAD_NANDF_CS6__FEC_TDATA3			0x148 0x530 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS6__GPIO3_22			0x148 0x530 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS6__NANDF_CS6			0x148 0x530 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS6__PATA_DA_2			0x148 0x530 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS6__SD4_DAT3			0x148 0x530 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS7__FEC_TX_EN			0x14c 0x534 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS7__GPIO3_23			0x14c 0x534 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS7__NANDF_CS7			0x14c 0x534 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS7__SD3_CLK			0x14c 0x534 0x000 0x5 0x0
+#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0		0x150 0x538 0x000 0x2 0x0
+#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK		0x150 0x538 0x974 0x1 0x0
+#define MX51_PAD_NANDF_RDY_INT__GPIO3_24		0x150 0x538 0x000 0x3 0x0
+#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT		0x150 0x538 0x938 0x0 0x0
+#define MX51_PAD_NANDF_RDY_INT__SD3_CMD			0x150 0x538 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D15__ECSPI2_MOSI			0x154 0x53c 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D15__GPIO3_25			0x154 0x53c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D15__NANDF_D15			0x154 0x53c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D15__PATA_DATA15			0x154 0x53c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D15__SD3_DAT7			0x154 0x53c 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D14__ECSPI2_SS3			0x158 0x540 0x934 0x2 0x0
+#define MX51_PAD_NANDF_D14__GPIO3_26			0x158 0x540 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D14__NANDF_D14			0x158 0x540 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D14__PATA_DATA14			0x158 0x540 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D14__SD3_DAT6			0x158 0x540 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D13__ECSPI2_SS2			0x15c 0x544 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D13__GPIO3_27			0x15c 0x544 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D13__NANDF_D13			0x15c 0x544 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D13__PATA_DATA13			0x15c 0x544 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D13__SD3_DAT5			0x15c 0x544 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D12__ECSPI2_SS1			0x160 0x548 0x930 0x2 0x1
+#define MX51_PAD_NANDF_D12__GPIO3_28			0x160 0x548 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D12__NANDF_D12			0x160 0x548 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D12__PATA_DATA12			0x160 0x548 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D12__SD3_DAT4			0x160 0x548 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D11__FEC_RX_DV			0x164 0x54c 0x96c 0x2 0x0
+#define MX51_PAD_NANDF_D11__GPIO3_29			0x164 0x54c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D11__NANDF_D11			0x164 0x54c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D11__PATA_DATA11			0x164 0x54c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D11__SD3_DATA3			0x164 0x54c 0x948 0x5 0x1
+#define MX51_PAD_NANDF_D10__GPIO3_30			0x168 0x550 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D10__NANDF_D10			0x168 0x550 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D10__PATA_DATA10			0x168 0x550 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D10__SD3_DATA2			0x168 0x550 0x944 0x5 0x1
+#define MX51_PAD_NANDF_D9__FEC_RDATA0			0x16c 0x554 0x958 0x2 0x0
+#define MX51_PAD_NANDF_D9__GPIO3_31			0x16c 0x554 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D9__NANDF_D9			0x16c 0x554 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D9__PATA_DATA9			0x16c 0x554 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D9__SD3_DATA1			0x16c 0x554 0x940 0x5 0x1
+#define MX51_PAD_NANDF_D8__FEC_TDATA0			0x170 0x558 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D8__GPIO4_0			0x170 0x558 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D8__NANDF_D8			0x170 0x558 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D8__PATA_DATA8			0x170 0x558 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D8__SD3_DATA0			0x170 0x558 0x93c 0x5 0x1
+#define MX51_PAD_NANDF_D7__GPIO4_1			0x174 0x55c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D7__NANDF_D7			0x174 0x55c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D7__PATA_DATA7			0x174 0x55c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D7__USBH3_DATA0			0x174 0x55c 0x9fc 0x5 0x0
+#define MX51_PAD_NANDF_D6__GPIO4_2			0x178 0x560 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D6__NANDF_D6			0x178 0x560 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D6__PATA_DATA6			0x178 0x560 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D6__SD4_LCTL			0x178 0x560 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D6__USBH3_DATA1			0x178 0x560 0xa00 0x5 0x0
+#define MX51_PAD_NANDF_D5__GPIO4_3			0x17c 0x564 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D5__NANDF_D5			0x17c 0x564 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D5__PATA_DATA5			0x17c 0x564 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D5__SD4_WP			0x17c 0x564 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D5__USBH3_DATA2			0x17c 0x564 0xa04 0x5 0x0
+#define MX51_PAD_NANDF_D4__GPIO4_4			0x180 0x568 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D4__NANDF_D4			0x180 0x568 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D4__PATA_DATA4			0x180 0x568 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D4__SD4_CD			0x180 0x568 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D4__USBH3_DATA3			0x180 0x568 0xa08 0x5 0x0
+#define MX51_PAD_NANDF_D3__GPIO4_5			0x184 0x56c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D3__NANDF_D3			0x184 0x56c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D3__PATA_DATA3			0x184 0x56c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D3__SD4_DAT4			0x184 0x56c 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D3__USBH3_DATA4			0x184 0x56c 0xa0c 0x5 0x0
+#define MX51_PAD_NANDF_D2__GPIO4_6			0x188 0x570 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D2__NANDF_D2			0x188 0x570 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D2__PATA_DATA2			0x188 0x570 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D2__SD4_DAT5			0x188 0x570 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D2__USBH3_DATA5			0x188 0x570 0xa10 0x5 0x0
+#define MX51_PAD_NANDF_D1__GPIO4_7			0x18c 0x574 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D1__NANDF_D1			0x18c 0x574 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D1__PATA_DATA1			0x18c 0x574 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D1__SD4_DAT6			0x18c 0x574 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D1__USBH3_DATA6			0x18c 0x574 0xa14 0x5 0x0
+#define MX51_PAD_NANDF_D0__GPIO4_8			0x190 0x578 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D0__NANDF_D0			0x190 0x578 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D0__PATA_DATA0			0x190 0x578 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D0__SD4_DAT7			0x190 0x578 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D0__USBH3_DATA7			0x190 0x578 0xa18 0x5 0x0
+#define MX51_PAD_CSI1_D8__CSI1_D8			0x194 0x57c 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D8__GPIO3_12			0x194 0x57c 0x998 0x3 0x1
+#define MX51_PAD_CSI1_D9__CSI1_D9			0x198 0x580 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D9__GPIO3_13			0x198 0x580 0x000 0x3 0x0
+#define MX51_PAD_CSI1_D10__CSI1_D10			0x19c 0x584 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D11__CSI1_D11			0x1a0 0x588 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D12__CSI1_D12			0x1a4 0x58c 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D13__CSI1_D13			0x1a8 0x590 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D14__CSI1_D14			0x1ac 0x594 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D15__CSI1_D15			0x1b0 0x598 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D16__CSI1_D16			0x1b4 0x59c 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D17__CSI1_D17			0x1b8 0x5a0 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D18__CSI1_D18			0x1bc 0x5a4 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D19__CSI1_D19			0x1c0 0x5a8 0x000 0x0 0x0
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC			0x1c4 0x5ac 0x000 0x0 0x0
+#define MX51_PAD_CSI1_VSYNC__GPIO3_14			0x1c4 0x5ac 0x000 0x3 0x0
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC			0x1c8 0x5b0 0x000 0x0 0x0
+#define MX51_PAD_CSI1_HSYNC__GPIO3_15			0x1c8 0x5b0 0x000 0x3 0x0
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK		0x000 0x5b4 0x000 0x0 0x0
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK			0x000 0x5b8 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D12__CSI2_D12			0x1cc 0x5bc 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D12__GPIO4_9			0x1cc 0x5bc 0x000 0x3 0x0
+#define MX51_PAD_CSI2_D13__CSI2_D13			0x1d0 0x5c0 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D13__GPIO4_10			0x1d0 0x5c0 0x000 0x3 0x0
+#define MX51_PAD_CSI2_D14__CSI2_D14			0x1d4 0x5c4 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D15__CSI2_D15			0x1d8 0x5c8 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D16__CSI2_D16			0x1dc 0x5cc 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D17__CSI2_D17			0x1e0 0x5d0 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D18__CSI2_D18			0x1e4 0x5d4 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D18__GPIO4_11			0x1e4 0x5d4 0x000 0x3 0x0
+#define MX51_PAD_CSI2_D19__CSI2_D19			0x1e8 0x5d8 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D19__GPIO4_12			0x1e8 0x5d8 0x000 0x3 0x0
+#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC			0x1ec 0x5dc 0x000 0x0 0x0
+#define MX51_PAD_CSI2_VSYNC__GPIO4_13			0x1ec 0x5dc 0x000 0x3 0x0
+#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC			0x1f0 0x5e0 0x000 0x0 0x0
+#define MX51_PAD_CSI2_HSYNC__GPIO4_14			0x1f0 0x5e0 0x000 0x3 0x0
+#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK		0x1f4 0x5e4 0x000 0x0 0x0
+#define MX51_PAD_CSI2_PIXCLK__GPIO4_15			0x1f4 0x5e4 0x000 0x3 0x0
+#define MX51_PAD_I2C1_CLK__GPIO4_16			0x1f8 0x5e8 0x000 0x3 0x0
+#define MX51_PAD_I2C1_CLK__I2C1_CLK			0x1f8 0x5e8 0x000 0x0 0x0
+#define MX51_PAD_I2C1_DAT__GPIO4_17			0x1fc 0x5ec 0x000 0x3 0x0
+#define MX51_PAD_I2C1_DAT__I2C1_DAT			0x1fc 0x5ec 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD			0x200 0x5f0 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_TXD__GPIO4_18			0x200 0x5f0 0x000 0x3 0x0
+#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD			0x204 0x5f4 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_RXD__GPIO4_19			0x204 0x5f4 0x000 0x3 0x0
+#define MX51_PAD_AUD3_BB_RXD__UART3_RXD			0x204 0x5f4 0x9f4 0x1 0x2
+#define MX51_PAD_AUD3_BB_CK__AUD3_TXC			0x208 0x5f8 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_CK__GPIO4_20			0x208 0x5f8 0x000 0x3 0x0
+#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS			0x20c 0x5fc 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_FS__GPIO4_21			0x20c 0x5fc 0x000 0x3 0x0
+#define MX51_PAD_AUD3_BB_FS__UART3_TXD			0x20c 0x5fc 0x000 0x1 0x0
+#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI		0x210 0x600 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_MOSI__GPIO4_22			0x210 0x600 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_MOSI__I2C1_SDA			0x210 0x600 0x9b4 0x1 0x1
+#define MX51_PAD_CSPI1_MISO__AUD4_RXD			0x214 0x604 0x8c4 0x1 0x1
+#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO		0x214 0x604 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_MISO__GPIO4_23			0x214 0x604 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_SS0__AUD4_TXC			0x218 0x608 0x8cc 0x1 0x1
+#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0			0x218 0x608 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_SS0__GPIO4_24			0x218 0x608 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_SS1__AUD4_TXD			0x21c 0x60c 0x8c8 0x1 0x1
+#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1			0x21c 0x60c 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_SS1__GPIO4_25			0x21c 0x60c 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_RDY__AUD4_TXFS			0x220 0x610 0x8d0 0x1 0x1
+#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY			0x220 0x610 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_RDY__GPIO4_26			0x220 0x610 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK		0x224 0x614 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_SCLK__GPIO4_27			0x224 0x614 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_SCLK__I2C1_SCL			0x224 0x614 0x9b0 0x1 0x1
+#define MX51_PAD_UART1_RXD__GPIO4_28			0x228 0x618 0x000 0x3 0x0
+#define MX51_PAD_UART1_RXD__UART1_RXD			0x228 0x618 0x9e4 0x0 0x0
+#define MX51_PAD_UART1_TXD__GPIO4_29			0x22c 0x61c 0x000 0x3 0x0
+#define MX51_PAD_UART1_TXD__PWM2_PWMO			0x22c 0x61c 0x000 0x1 0x0
+#define MX51_PAD_UART1_TXD__UART1_TXD			0x22c 0x61c 0x000 0x0 0x0
+#define MX51_PAD_UART1_RTS__GPIO4_30			0x230 0x620 0x000 0x3 0x0
+#define MX51_PAD_UART1_RTS__UART1_RTS			0x230 0x620 0x9e0 0x0 0x0
+#define MX51_PAD_UART1_CTS__GPIO4_31			0x234 0x624 0x000 0x3 0x0
+#define MX51_PAD_UART1_CTS__UART1_CTS			0x234 0x624 0x000 0x0 0x0
+#define MX51_PAD_UART2_RXD__FIRI_TXD			0x238 0x628 0x000 0x1 0x0
+#define MX51_PAD_UART2_RXD__GPIO1_20			0x238 0x628 0x000 0x3 0x0
+#define MX51_PAD_UART2_RXD__UART2_RXD			0x238 0x628 0x9ec 0x0 0x2
+#define MX51_PAD_UART2_TXD__FIRI_RXD			0x23c 0x62c 0x000 0x1 0x0
+#define MX51_PAD_UART2_TXD__GPIO1_21			0x23c 0x62c 0x000 0x3 0x0
+#define MX51_PAD_UART2_TXD__UART2_TXD			0x23c 0x62c 0x000 0x0 0x0
+#define MX51_PAD_UART3_RXD__CSI1_D0			0x240 0x630 0x000 0x2 0x0
+#define MX51_PAD_UART3_RXD__GPIO1_22			0x240 0x630 0x000 0x3 0x0
+#define MX51_PAD_UART3_RXD__UART1_DTR			0x240 0x630 0x000 0x0 0x0
+#define MX51_PAD_UART3_RXD__UART3_RXD			0x240 0x630 0x9f4 0x1 0x4
+#define MX51_PAD_UART3_TXD__CSI1_D1			0x244 0x634 0x000 0x2 0x0
+#define MX51_PAD_UART3_TXD__GPIO1_23			0x244 0x634 0x000 0x3 0x0
+#define MX51_PAD_UART3_TXD__UART1_DSR			0x244 0x634 0x000 0x0 0x0
+#define MX51_PAD_UART3_TXD__UART3_TXD			0x244 0x634 0x000 0x1 0x0
+#define MX51_PAD_OWIRE_LINE__GPIO1_24			0x248 0x638 0x000 0x3 0x0
+#define MX51_PAD_OWIRE_LINE__OWIRE_LINE			0x248 0x638 0x000 0x0 0x0
+#define MX51_PAD_OWIRE_LINE__SPDIF_OUT			0x248 0x638 0x000 0x6 0x0
+#define MX51_PAD_KEY_ROW0__KEY_ROW0			0x24c 0x63c 0x000 0x0 0x0
+#define MX51_PAD_KEY_ROW1__KEY_ROW1			0x250 0x640 0x000 0x0 0x0
+#define MX51_PAD_KEY_ROW2__KEY_ROW2			0x254 0x644 0x000 0x0 0x0
+#define MX51_PAD_KEY_ROW3__KEY_ROW3			0x258 0x648 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL0__KEY_COL0			0x25c 0x64c 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL0__PLL1_BYP			0x25c 0x64c 0x90c 0x7 0x0
+#define MX51_PAD_KEY_COL1__KEY_COL1			0x260 0x650 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL1__PLL2_BYP			0x260 0x650 0x910 0x7 0x0
+#define MX51_PAD_KEY_COL2__KEY_COL2			0x264 0x654 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL2__PLL3_BYP			0x264 0x654 0x000 0x7 0x0
+#define MX51_PAD_KEY_COL3__KEY_COL3			0x268 0x658 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL4__I2C2_SCL			0x26c 0x65c 0x9b8 0x3 0x1
+#define MX51_PAD_KEY_COL4__KEY_COL4			0x26c 0x65c 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL4__SPDIF_OUT1			0x26c 0x65c 0x000 0x6 0x0
+#define MX51_PAD_KEY_COL4__UART1_RI			0x26c 0x65c 0x000 0x1 0x0
+#define MX51_PAD_KEY_COL4__UART3_RTS			0x26c 0x65c 0x9f0 0x2 0x4
+#define MX51_PAD_KEY_COL5__I2C2_SDA			0x270 0x660 0x9bc 0x3 0x1
+#define MX51_PAD_KEY_COL5__KEY_COL5			0x270 0x660 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL5__UART1_DCD			0x270 0x660 0x000 0x1 0x0
+#define MX51_PAD_KEY_COL5__UART3_CTS			0x270 0x660 0x000 0x2 0x0
+#define MX51_PAD_USBH1_CLK__CSPI_SCLK			0x278 0x678 0x914 0x1 0x1
+#define MX51_PAD_USBH1_CLK__GPIO1_25			0x278 0x678 0x000 0x2 0x0
+#define MX51_PAD_USBH1_CLK__I2C2_SCL			0x278 0x678 0x9b8 0x5 0x2
+#define MX51_PAD_USBH1_CLK__USBH1_CLK			0x278 0x678 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DIR__CSPI_MOSI			0x27c 0x67c 0x91c 0x1 0x1
+#define MX51_PAD_USBH1_DIR__GPIO1_26			0x27c 0x67c 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DIR__I2C2_SDA			0x27c 0x67c 0x9bc 0x5 0x2
+#define MX51_PAD_USBH1_DIR__USBH1_DIR			0x27c 0x67c 0x000 0x0 0x0
+#define MX51_PAD_USBH1_STP__CSPI_RDY			0x280 0x680 0x000 0x1 0x0
+#define MX51_PAD_USBH1_STP__GPIO1_27			0x280 0x680 0x000 0x2 0x0
+#define MX51_PAD_USBH1_STP__UART3_RXD			0x280 0x680 0x9f4 0x5 0x6
+#define MX51_PAD_USBH1_STP__USBH1_STP			0x280 0x680 0x000 0x0 0x0
+#define MX51_PAD_USBH1_NXT__CSPI_MISO			0x284 0x684 0x918 0x1 0x0
+#define MX51_PAD_USBH1_NXT__GPIO1_28			0x284 0x684 0x000 0x2 0x0
+#define MX51_PAD_USBH1_NXT__UART3_TXD			0x284 0x684 0x000 0x5 0x0
+#define MX51_PAD_USBH1_NXT__USBH1_NXT			0x284 0x684 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA0__GPIO1_11			0x288 0x688 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA0__UART2_CTS			0x288 0x688 0x000 0x1 0x0
+#define MX51_PAD_USBH1_DATA0__USBH1_DATA0		0x288 0x688 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA1__GPIO1_12			0x28c 0x68c 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA1__UART2_RXD			0x28c 0x68c 0x9ec 0x1 0x4
+#define MX51_PAD_USBH1_DATA1__USBH1_DATA1		0x28c 0x68c 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA2__GPIO1_13			0x290 0x690 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA2__UART2_TXD			0x290 0x690 0x000 0x1 0x0
+#define MX51_PAD_USBH1_DATA2__USBH1_DATA2		0x290 0x690 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA3__GPIO1_14			0x294 0x694 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA3__UART2_RTS			0x294 0x694 0x9e8 0x1 0x5
+#define MX51_PAD_USBH1_DATA3__USBH1_DATA3		0x294 0x694 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA4__CSPI_SS0			0x298 0x698 0x000 0x1 0x0
+#define MX51_PAD_USBH1_DATA4__GPIO1_15			0x298 0x698 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA4__USBH1_DATA4		0x298 0x698 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA5__CSPI_SS1			0x29c 0x69c 0x920 0x1 0x0
+#define MX51_PAD_USBH1_DATA5__GPIO1_16			0x29c 0x69c 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA5__USBH1_DATA5		0x29c 0x69c 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA6__CSPI_SS3			0x2a0 0x6a0 0x928 0x1 0x1
+#define MX51_PAD_USBH1_DATA6__GPIO1_17			0x2a0 0x6a0 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA6__USBH1_DATA6		0x2a0 0x6a0 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3		0x2a4 0x6a4 0x000 0x1 0x0
+#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3		0x2a4 0x6a4 0x934 0x5 0x1
+#define MX51_PAD_USBH1_DATA7__GPIO1_18			0x2a4 0x6a4 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA7__USBH1_DATA7		0x2a4 0x6a4 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN11__DI1_PIN11			0x2a8 0x6a8 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN11__ECSPI1_SS2			0x2a8 0x6a8 0x000 0x7 0x0
+#define MX51_PAD_DI1_PIN11__GPIO3_0			0x2a8 0x6a8 0x000 0x4 0x0
+#define MX51_PAD_DI1_PIN12__DI1_PIN12			0x2ac 0x6ac 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN12__GPIO3_1			0x2ac 0x6ac 0x978 0x4 0x1
+#define MX51_PAD_DI1_PIN13__DI1_PIN13			0x2b0 0x6b0 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN13__GPIO3_2			0x2b0 0x6b0 0x97c 0x4 0x1
+#define MX51_PAD_DI1_D0_CS__DI1_D0_CS			0x2b4 0x6b4 0x000 0x0 0x0
+#define MX51_PAD_DI1_D0_CS__GPIO3_3			0x2b4 0x6b4 0x980 0x4 0x1
+#define MX51_PAD_DI1_D1_CS__DI1_D1_CS			0x2b8 0x6b8 0x000 0x0 0x0
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN14			0x2b8 0x6b8 0x000 0x2 0x0
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN5			0x2b8 0x6b8 0x000 0x3 0x0
+#define MX51_PAD_DI1_D1_CS__GPIO3_4			0x2b8 0x6b8 0x984 0x4 0x1
+#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1		0x2bc 0x6bc 0x9a4 0x2 0x1
+#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN		0x2bc 0x6bc 0x9c4 0x0 0x0
+#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5		0x2bc 0x6bc 0x988 0x4 0x1
+#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6		0x2c0 0x6c0 0x000 0x3 0x0
+#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO		0x2c0 0x6c0 0x9c4 0x0 0x1
+#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6		0x2c0 0x6c0 0x98c 0x4 0x1
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17		0x2c4 0x6c4 0x000 0x2 0x0
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7		0x2c4 0x6c4 0x000 0x3 0x0
+#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK		0x2c4 0x6c4 0x000 0x0 0x0
+#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7		0x2c4 0x6c4 0x990 0x4 0x1
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16		0x2c8 0x6c8 0x000 0x2 0x0
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8		0x2c8 0x6c8 0x000 0x3 0x0
+#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS		0x2c8 0x6c8 0x000 0x0 0x0
+#define MX51_PAD_DISPB2_SER_RS__GPIO3_8			0x2c8 0x6c8 0x994 0x4 0x1
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0			0x2cc 0x6cc 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1			0x2d0 0x6d0 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2			0x2d4 0x6d4 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3			0x2d8 0x6d8 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4			0x2dc 0x6dc 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5			0x2e0 0x6e0 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC		0x2e4 0x6e4 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6			0x2e4 0x6e4 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG		0x2e8 0x6e8 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7			0x2e8 0x6e8 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT8__BOOT_SRC0			0x2ec 0x6ec 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8			0x2ec 0x6ec 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT9__BOOT_SRC1			0x2f0 0x6f0 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9			0x2f0 0x6f0 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE		0x2f4 0x6f4 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10		0x2f4 0x6f4 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2		0x2f8 0x6f8 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11		0x2f8 0x6f8 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL		0x2fc 0x6fc 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12		0x2fc 0x6fc 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0		0x300 0x700 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13		0x300 0x700 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1		0x304 0x704 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14		0x304 0x704 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH		0x308 0x708 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15		0x308 0x708 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0		0x30c 0x70c 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16		0x30c 0x70c 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1		0x310 0x710 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17		0x310 0x710 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0		0x314 0x714 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18		0x314 0x714 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN11		0x314 0x714 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN5		0x314 0x714 0x000 0x4 0x0
+#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1		0x318 0x718 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19		0x318 0x718 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN12		0x318 0x718 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN6		0x318 0x718 0x000 0x4 0x0
+#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0		0x31c 0x71c 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20		0x31c 0x71c 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN13		0x31c 0x71c 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN7		0x31c 0x71c 0x000 0x4 0x0
+#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1		0x320 0x720 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21		0x320 0x720 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN14		0x320 0x720 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN8		0x320 0x720 0x000 0x4 0x0
+#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0		0x324 0x724 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22		0x324 0x724 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS		0x324 0x724 0x000 0x6 0x0
+#define MX51_PAD_DISP1_DAT22__DISP2_DAT16		0x324 0x724 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1		0x328 0x728 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23		0x328 0x728 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS		0x328 0x728 0x000 0x6 0x0
+#define MX51_PAD_DISP1_DAT23__DISP2_DAT17		0x328 0x728 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS		0x328 0x728 0x000 0x4 0x0
+#define MX51_PAD_DI1_PIN3__DI1_PIN3			0x32c 0x72c 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN2__DI1_PIN2			0x330 0x734 0x000 0x0 0x0
+#define MX51_PAD_DI_GP2__DISP1_SER_CLK			0x338 0x740 0x000 0x0 0x0
+#define MX51_PAD_DI_GP2__DISP2_WAIT			0x338 0x740 0x9a8 0x2 0x1
+#define MX51_PAD_DI_GP3__CSI1_DATA_EN			0x33c 0x744 0x9a0 0x3 0x1
+#define MX51_PAD_DI_GP3__DISP1_SER_DIO			0x33c 0x744 0x9c0 0x0 0x0
+#define MX51_PAD_DI_GP3__FEC_TX_ER			0x33c 0x744 0x000 0x2 0x0
+#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN			0x340 0x748 0x99c 0x3 0x1
+#define MX51_PAD_DI2_PIN4__DI2_PIN4			0x340 0x748 0x000 0x0 0x0
+#define MX51_PAD_DI2_PIN4__FEC_CRS			0x340 0x748 0x950 0x2 0x1
+#define MX51_PAD_DI2_PIN2__DI2_PIN2			0x344 0x74c 0x000 0x0 0x0
+#define MX51_PAD_DI2_PIN2__FEC_MDC			0x344 0x74c 0x000 0x2 0x0
+#define MX51_PAD_DI2_PIN3__DI2_PIN3			0x348 0x750 0x000 0x0 0x0
+#define MX51_PAD_DI2_PIN3__FEC_MDIO			0x348 0x750 0x954 0x2 0x1
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK		0x34c 0x754 0x000 0x0 0x0
+#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1		0x34c 0x754 0x95c 0x2 0x1
+#define MX51_PAD_DI_GP4__DI2_PIN15			0x350 0x758 0x000 0x4 0x0
+#define MX51_PAD_DI_GP4__DISP1_SER_DIN			0x350 0x758 0x9c0 0x0 0x1
+#define MX51_PAD_DI_GP4__DISP2_PIN1			0x350 0x758 0x000 0x3 0x0
+#define MX51_PAD_DI_GP4__FEC_RDATA2			0x350 0x758 0x960 0x2 0x1
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0			0x354 0x75c 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT0__FEC_RDATA3			0x354 0x75c 0x964 0x2 0x1
+#define MX51_PAD_DISP2_DAT0__KEY_COL6			0x354 0x75c 0x9c8 0x4 0x1
+#define MX51_PAD_DISP2_DAT0__UART3_RXD			0x354 0x75c 0x9f4 0x5 0x8
+#define MX51_PAD_DISP2_DAT0__USBH3_CLK			0x354 0x75c 0x9f8 0x3 0x1
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1			0x358 0x760 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT1__FEC_RX_ER			0x358 0x760 0x970 0x2 0x1
+#define MX51_PAD_DISP2_DAT1__KEY_COL7			0x358 0x760 0x9cc 0x4 0x1
+#define MX51_PAD_DISP2_DAT1__UART3_TXD			0x358 0x760 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT1__USBH3_DIR			0x358 0x760 0xa1c 0x3 0x1
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2			0x35c 0x764 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3			0x360 0x768 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4			0x364 0x76c 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5			0x368 0x770 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT6__DISP2_DAT6			0x36c 0x774 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT6__FEC_TDATA1			0x36c 0x774 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT6__GPIO1_19			0x36c 0x774 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT6__KEY_ROW4			0x36c 0x774 0x9d0 0x4 0x1
+#define MX51_PAD_DISP2_DAT6__USBH3_STP			0x36c 0x774 0xa24 0x3 0x1
+#define MX51_PAD_DISP2_DAT7__DISP2_DAT7			0x370 0x778 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT7__FEC_TDATA2			0x370 0x778 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT7__GPIO1_29			0x370 0x778 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT7__KEY_ROW5			0x370 0x778 0x9d4 0x4 0x1
+#define MX51_PAD_DISP2_DAT7__USBH3_NXT			0x370 0x778 0xa20 0x3 0x1
+#define MX51_PAD_DISP2_DAT8__DISP2_DAT8			0x374 0x77c 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT8__FEC_TDATA3			0x374 0x77c 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT8__GPIO1_30			0x374 0x77c 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT8__KEY_ROW6			0x374 0x77c 0x9d8 0x4 0x1
+#define MX51_PAD_DISP2_DAT8__USBH3_DATA0		0x374 0x77c 0x9fc 0x3 0x1
+#define MX51_PAD_DISP2_DAT9__AUD6_RXC			0x378 0x780 0x8f4 0x4 0x1
+#define MX51_PAD_DISP2_DAT9__DISP2_DAT9			0x378 0x780 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT9__FEC_TX_EN			0x378 0x780 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT9__GPIO1_31			0x378 0x780 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT9__USBH3_DATA1		0x378 0x780 0xa00 0x3 0x1
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10		0x37c 0x784 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS		0x37c 0x784 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT10__FEC_COL			0x37c 0x784 0x94c 0x2 0x1
+#define MX51_PAD_DISP2_DAT10__KEY_ROW7			0x37c 0x784 0x9dc 0x4 0x1
+#define MX51_PAD_DISP2_DAT10__USBH3_DATA2		0x37c 0x784 0xa04 0x3 0x1
+#define MX51_PAD_DISP2_DAT11__AUD6_TXD			0x380 0x788 0x8f0 0x4 0x1
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11		0x380 0x788 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK		0x380 0x788 0x968 0x2 0x1
+#define MX51_PAD_DISP2_DAT11__GPIO1_10			0x380 0x788 0x000 0x7 0x0
+#define MX51_PAD_DISP2_DAT11__USBH3_DATA3		0x380 0x788 0xa08 0x3 0x1
+#define MX51_PAD_DISP2_DAT12__AUD6_RXD			0x384 0x78c 0x8ec 0x4 0x1
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12		0x384 0x78c 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT12__FEC_RX_DV			0x384 0x78c 0x96c 0x2 0x1
+#define MX51_PAD_DISP2_DAT12__USBH3_DATA4		0x384 0x78c 0xa0c 0x3 0x1
+#define MX51_PAD_DISP2_DAT13__AUD6_TXC			0x388 0x790 0x8fc 0x4 0x1
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13		0x388 0x790 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK		0x388 0x790 0x974 0x2 0x1
+#define MX51_PAD_DISP2_DAT13__USBH3_DATA5		0x388 0x790 0xa10 0x3 0x1
+#define MX51_PAD_DISP2_DAT14__AUD6_TXFS			0x38c 0x794 0x900 0x4 0x1
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14		0x38c 0x794 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT14__FEC_RDATA0		0x38c 0x794 0x958 0x2 0x1
+#define MX51_PAD_DISP2_DAT14__USBH3_DATA6		0x38c 0x794 0xa14 0x3 0x1
+#define MX51_PAD_DISP2_DAT15__AUD6_RXFS			0x390 0x798 0x8f8 0x4 0x1
+#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS		0x390 0x798 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15		0x390 0x798 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT15__FEC_TDATA0		0x390 0x798 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT15__USBH3_DATA7		0x390 0x798 0xa18 0x3 0x1
+#define MX51_PAD_SD1_CMD__AUD5_RXFS			0x394 0x79c 0x8e0 0x1 0x1
+#define MX51_PAD_SD1_CMD__CSPI_MOSI			0x394 0x79c 0x91c 0x2 0x2
+#define MX51_PAD_SD1_CMD__SD1_CMD			0x394 0x79c 0x000 0x0 0x0
+#define MX51_PAD_SD1_CLK__AUD5_RXC			0x398 0x7a0 0x8dc 0x1 0x1
+#define MX51_PAD_SD1_CLK__CSPI_SCLK			0x398 0x7a0 0x914 0x2 0x2
+#define MX51_PAD_SD1_CLK__SD1_CLK			0x398 0x7a0 0x000 0x0 0x0
+#define MX51_PAD_SD1_DATA0__AUD5_TXD			0x39c 0x7a4 0x8d8 0x1 0x2
+#define MX51_PAD_SD1_DATA0__CSPI_MISO			0x39c 0x7a4 0x918 0x2 0x1
+#define MX51_PAD_SD1_DATA0__SD1_DATA0			0x39c 0x7a4 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA0__EIM_DA0			0x01c 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA1__EIM_DA1			0x020 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA2__EIM_DA2			0x024 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA3__EIM_DA3			0x028 0x000 0x000 0x0 0x0
+#define MX51_PAD_SD1_DATA1__AUD5_RXD			0x3a0 0x7a8 0x8d4 0x1 0x2
+#define MX51_PAD_SD1_DATA1__SD1_DATA1			0x3a0 0x7a8 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA4__EIM_DA4			0x02c 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA5__EIM_DA5			0x030 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA6__EIM_DA6			0x034 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA7__EIM_DA7			0x038 0x000 0x000 0x0 0x0
+#define MX51_PAD_SD1_DATA2__AUD5_TXC			0x3a4 0x7ac 0x8e4 0x1 0x2
+#define MX51_PAD_SD1_DATA2__SD1_DATA2			0x3a4 0x7ac 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA10__EIM_DA10			0x044 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA11__EIM_DA11			0x048 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA8__EIM_DA8			0x03c 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA9__EIM_DA9			0x040 0x000 0x000 0x0 0x0
+#define MX51_PAD_SD1_DATA3__AUD5_TXFS			0x3a8 0x7b0 0x8e8 0x1 0x2
+#define MX51_PAD_SD1_DATA3__CSPI_SS1			0x3a8 0x7b0 0x920 0x2 0x1
+#define MX51_PAD_SD1_DATA3__SD1_DATA3			0x3a8 0x7b0 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_0__CSPI_SS2			0x3ac 0x7b4 0x924 0x2 0x0
+#define MX51_PAD_GPIO1_0__GPIO1_0			0x3ac 0x7b4 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_0__SD1_CD			0x3ac 0x7b4 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_1__CSPI_MISO			0x3b0 0x7b8 0x918 0x2 0x2
+#define MX51_PAD_GPIO1_1__GPIO1_1			0x3b0 0x7b8 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_1__SD1_WP			0x3b0 0x7b8 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA12__EIM_DA12			0x04c 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA13__EIM_DA13			0x050 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA14__EIM_DA14			0x054 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA15__EIM_DA15			0x058 0x000 0x000 0x0 0x0
+#define MX51_PAD_SD2_CMD__CSPI_MOSI			0x3b4 0x7bc 0x91c 0x2 0x3
+#define MX51_PAD_SD2_CMD__I2C1_SCL			0x3b4 0x7bc 0x9b0 0x1 0x2
+#define MX51_PAD_SD2_CMD__SD2_CMD			0x3b4 0x7bc 0x000 0x0 0x0
+#define MX51_PAD_SD2_CLK__CSPI_SCLK			0x3b8 0x7c0 0x914 0x2 0x3
+#define MX51_PAD_SD2_CLK__I2C1_SDA			0x3b8 0x7c0 0x9b4 0x1 0x2
+#define MX51_PAD_SD2_CLK__SD2_CLK			0x3b8 0x7c0 0x000 0x0 0x0
+#define MX51_PAD_SD2_DATA0__CSPI_MISO			0x3bc 0x7c4 0x918 0x2 0x3
+#define MX51_PAD_SD2_DATA0__SD1_DAT4			0x3bc 0x7c4 0x000 0x1 0x0
+#define MX51_PAD_SD2_DATA0__SD2_DATA0			0x3bc 0x7c4 0x000 0x0 0x0
+#define MX51_PAD_SD2_DATA1__SD1_DAT5			0x3c0 0x7c8 0x000 0x1 0x0
+#define MX51_PAD_SD2_DATA1__SD2_DATA1			0x3c0 0x7c8 0x000 0x0 0x0
+#define MX51_PAD_SD2_DATA1__USBH3_H2_DP			0x3c0 0x7c8 0x000 0x2 0x0
+#define MX51_PAD_SD2_DATA2__SD1_DAT6			0x3c4 0x7cc 0x000 0x1 0x0
+#define MX51_PAD_SD2_DATA2__SD2_DATA2			0x3c4 0x7cc 0x000 0x0 0x0
+#define MX51_PAD_SD2_DATA2__USBH3_H2_DM			0x3c4 0x7cc 0x000 0x2 0x0
+#define MX51_PAD_SD2_DATA3__CSPI_SS2			0x3c8 0x7d0 0x924 0x2 0x1
+#define MX51_PAD_SD2_DATA3__SD1_DAT7			0x3c8 0x7d0 0x000 0x1 0x0
+#define MX51_PAD_SD2_DATA3__SD2_DATA3			0x3c8 0x7d0 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_2__CCM_OUT_2			0x3cc 0x7d4 0x000 0x5 0x0
+#define MX51_PAD_GPIO1_2__GPIO1_2			0x3cc 0x7d4 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_2__I2C2_SCL			0x3cc 0x7d4 0x9b8 0x2 0x3
+#define MX51_PAD_GPIO1_2__PLL1_BYP			0x3cc 0x7d4 0x90c 0x7 0x1
+#define MX51_PAD_GPIO1_2__PWM1_PWMO			0x3cc 0x7d4 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_3__GPIO1_3			0x3d0 0x7d8 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_3__I2C2_SDA			0x3d0 0x7d8 0x9bc 0x2 0x3
+#define MX51_PAD_GPIO1_3__PLL2_BYP			0x3d0 0x7d8 0x910 0x7 0x1
+#define MX51_PAD_GPIO1_3__PWM2_PWMO			0x3d0 0x7d8 0x000 0x1 0x0
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ		0x3d4 0x7fc 0x000 0x0 0x0
+#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B		0x3d4 0x7fc 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK			0x3d8 0x804 0x908 0x4 0x1
+#define MX51_PAD_GPIO1_4__EIM_RDY			0x3d8 0x804 0x938 0x3 0x1
+#define MX51_PAD_GPIO1_4__GPIO1_4			0x3d8 0x804 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B			0x3d8 0x804 0x000 0x2 0x0
+#define MX51_PAD_GPIO1_5__CSI2_MCLK			0x3dc 0x808 0x000 0x6 0x0
+#define MX51_PAD_GPIO1_5__DISP2_PIN16			0x3dc 0x808 0x000 0x3 0x0
+#define MX51_PAD_GPIO1_5__GPIO1_5			0x3dc 0x808 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B			0x3dc 0x808 0x000 0x2 0x0
+#define MX51_PAD_GPIO1_6__DISP2_PIN17			0x3e0 0x80c 0x000 0x4 0x0
+#define MX51_PAD_GPIO1_6__GPIO1_6			0x3e0 0x80c 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_6__REF_EN_B			0x3e0 0x80c 0x000 0x3 0x0
+#define MX51_PAD_GPIO1_7__CCM_OUT_0			0x3e4 0x810 0x000 0x3 0x0
+#define MX51_PAD_GPIO1_7__GPIO1_7			0x3e4 0x810 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_7__SD2_WP			0x3e4 0x810 0x000 0x6 0x0
+#define MX51_PAD_GPIO1_7__SPDIF_OUT1			0x3e4 0x810 0x000 0x2 0x0
+#define MX51_PAD_GPIO1_8__CSI2_DATA_EN			0x3e8 0x814 0x99c 0x2 0x2
+#define MX51_PAD_GPIO1_8__GPIO1_8			0x3e8 0x814 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_8__SD2_CD			0x3e8 0x814 0x000 0x6 0x0
+#define MX51_PAD_GPIO1_8__USBH3_PWR			0x3e8 0x814 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_9__CCM_OUT_1			0x3ec 0x818 0x000 0x3 0x0
+#define MX51_PAD_GPIO1_9__DISP2_D1_CS			0x3ec 0x818 0x000 0x2 0x0
+#define MX51_PAD_GPIO1_9__DISP2_SER_CS			0x3ec 0x818 0x000 0x7 0x0
+#define MX51_PAD_GPIO1_9__GPIO1_9			0x3ec 0x818 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_9__SD2_LCTL			0x3ec 0x818 0x000 0x6 0x0
+#define MX51_PAD_GPIO1_9__USBH3_OC			0x3ec 0x818 0x000 0x1 0x0
+
+#endif /* __DTS_IMX51_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts
new file mode 100644
index 0000000000000..f7408722d68ab
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts
@@ -0,0 +1,331 @@
+/*
+ * Copyright 2015 Savoir-faire Linux
+ *
+ * This device tree is based on imx51-babbage.dts
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Technologic Systems TS-4800";
+	compatible = "technologic,imx51-ts4800", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x10000000>;
+	};
+
+	clocks {
+		ckih1 {
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			clock-frequency = <24576000>;
+		};
+	};
+
+	backlight_reg: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_lcd>;
+		regulator-name = "enable_lcd_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 78770>;
+		brightness-levels = <0 150 200 255>;
+		default-brightness-level = <1>;
+		power-supply = <&backlight_reg>;
+	};
+
+	display1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+
+		display-timings {
+			800x480p60 {
+				native-mode;
+				clock-frequency = <30066000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <50>;
+				hback-porch = <70>;
+				hsync-len = <50>;
+				vback-porch = <0>;
+				vfront-porch = <0>;
+				vsync-len = <50>;
+			};
+		};
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display0_in>;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_backlight>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	fpga@0 {
+		compatible = "simple-bus";
+		fsl,weim-cs-timing = <0x0061008F 0x00000002 0x1c022000
+				      0x00000000 0x1c092480 0x00000000>;
+		reg = <0 0x0000000 0x1d000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x1d000>;
+
+		syscon: syscon@10000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x10000 0x3d>;
+			reg-io-width = <2>;
+
+			wdt {
+				compatible = "technologic,ts4800-wdt";
+				syscon = <&syscon 0xe>;
+			};
+		};
+
+		touchscreen@12000 {
+			compatible = "technologic,ts4800-ts";
+			reg = <0x12000 0x1000>;
+			syscon = <&syscon 0x10 6>;
+		};
+
+		fpga_irqc: fpga-irqc@15000 {
+			compatible = "technologic,ts4800-irqc";
+			reg = <0x15000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_interrupt_fpga>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		can@1a000 {
+			compatible = "technologic,sja1000";
+			reg = <0x1a000 0x100>;
+			interrupt-parent = <&fpga_irqc>;
+			interrupts = <1>;
+			reg-io-width = <2>;
+			nxp,tx-output-config = <0x06>;
+			nxp,external-clock-frequency = <24000000>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+		>;
+	};
+
+	pinctrl_enable_lcd: enablelcdgrp {
+		fsl,pins = <
+			MX51_PAD_CSI2_D12__GPIO4_9		0x1c5
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_GPIO1_0__GPIO1_0		0x100
+			MX51_PAD_GPIO1_1__GPIO1_1		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
+			MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
+			MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
+			MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
+			MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
+			MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x00000180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x00000180
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x00002180
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x00002004
+			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x00002004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x00002004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x00002004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x00002004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x00002004
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x00002180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x000020a4
+			MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_interrupt_fpga: fpgaicgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D27__GPIO2_9		0xe5
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+			MX51_PAD_DI_GP4__DI2_PIN15		0x5
+		>;
+	};
+
+	pinctrl_pwm_backlight: backlightgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_2__PWM1_PWMO		0x80000000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_weim: weimgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_DTACK__EIM_DTACK		0x85
+			MX51_PAD_EIM_CS0__EIM_CS0		0x0
+			MX51_PAD_EIM_CS1__EIM_CS1		0x0
+			MX51_PAD_EIM_EB0__EIM_EB0		0x85
+			MX51_PAD_EIM_EB1__EIM_EB1		0x85
+			MX51_PAD_EIM_OE__EIM_OE			0x85
+			MX51_PAD_EIM_LBA__EIM_LBA		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts
new file mode 100644
index 0000000000000..5d4b29d765853
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts
@@ -0,0 +1,894 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2017 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "ZII RDU1 Board";
+	compatible = "zii,imx51-rdu1", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio_gpio;
+		rtc0 = &ds1341;
+	};
+
+	clk_26M_osc: 26M_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_26M_osc_gate: 26M_gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz>;
+		clocks = <&clk_26M_osc>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	clk_26M_usb: usbhost_gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbgate26mhz>;
+		clocks = <&clk_26M_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	};
+
+	clk_26M_snd: snd_gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sndgate26mhz>;
+		clocks = <&clk_26M_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_5p0v_main: regulator-5p0v-main {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	disp0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		/* no compatible here, bootloader will patch in correct one */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		power-supply = <&reg_3p3v>;
+		enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	i2c_gpio: i2c-gpio {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_swi2c>;
+		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */
+			<&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,delay-us = <50>;
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			clocks = <&clk_26M_snd>;
+			VDDA-supply = <&vdig_reg>;
+			VDDIO-supply = <&vvideo_reg>;
+			#sound-dai-cells = <0>;
+		};
+	};
+
+	spi_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiospi0>;
+		status = "okay";
+
+		sck-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+
+		eeprom@0 {
+			compatible = "eeprom-93xx46";
+			reg = <0>;
+			spi-max-frequency = <1000000>;
+			spi-cs-high;
+			data-size = <8>;
+		};
+	};
+
+	mdio_gpio: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_swmdio>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio3 25 GPIO_ACTIVE_HIGH>; /* mdio */
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			dsa,member = <0 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					phy-mode = "rev-mii";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "netaux";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "netright";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "netleft";
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Front";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "TPA6130A2 HPLEFT",
+			"Headphone Jack", "TPA6130A2 HPRIGHT";
+		simple-audio-card,aux-devs = <&hpa1>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clk_26M_snd>;
+		};
+	};
+
+	usbh1phy: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1phy>;
+		clocks = <&clk_26M_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
+	};
+
+	usbh2phy: usbphy2 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh2phy>;
+		clocks = <&clk_26M_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled0@3 {
+				reg = <3>;
+				label = "system:green:status";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled1@4 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db642d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vgen3_reg>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "hp-amp-shutdown-b", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+
+	unused-sd3-wp-hog {
+		/*
+		 * See pinctrl_esdhc1 below for more details on this
+		 */
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	hpa1: amp@60 {
+		compatible = "ti,tpa6130a2";
+		reg = <0x60>;
+		Vdd-supply = <&reg_3p3v>;
+		sound-name-prefix = "TPA6130A2";
+	};
+
+	ds1341: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+
+	/* touch nodes default disabled, bootloader will enable the right one */
+
+	touchscreen@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+
+	touchscreen@4c {
+		compatible = "atmel,maxtouch";
+		reg = <0x4c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <2>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			touchscreen-inverted-x;
+			touchscreen-swapped-x-y;
+			syna,sensor-type = <1>;
+		};
+	};
+
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display_in>;
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+
+	mcu {
+		compatible = "zii,rave-sp-rdu1";
+		current-speed = <38400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		backlight {
+			compatible = "zii,rave-sp-backlight";
+		};
+
+		pwrbutton {
+			compatible = "zii,rave-sp-pwrbutton";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "dds-eeprom";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+
+		eeprom@ae {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xae 0x200>;
+			zii,eeprom-name = "switch-eeprom";
+			/*
+			 * Not all RDU1s have this functionality, so we
+			 * rely on the bootloader to enable this
+			 */
+			status = "disabled";
+		};
+	};
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	fsl,usbphy = <&usbh1phy>;
+	disable-over-current;
+	maximum-speed = "full-speed";
+	vbus-supply = <&reg_5p0v_main>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	fsl,usbphy = <&usbh2phy>;
+	disable-over-current;
+	vbus-supply = <&reg_5p0v_main>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb_reg>;
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&reg_5p0v_main>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_9__GPIO1_9		0x5e
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0xa5
+			MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x85
+			MX51_PAD_AUD3_BB_CK__AUD3_TXC		0xa5
+			MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x85
+		>;
+	};
+
+	pinctrl_clk26mhz: clk26mhzgrp {
+		fsl,pins = <
+			MX51_PAD_DI1_PIN12__GPIO3_1		0x85
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			/*
+			 * GPIO1_1 is not directly used by eSDHC1 in
+			 * any capacity, but earlier versions of RDU1
+			 * used that pin as WP GPIO for eSDHC3 and
+			 * because of that that pad has an external
+			 * pull-up resistor. This is problematic
+			 * because out of reset the pad is configured
+			 * as ALT0 which serves as SD1_WP, which, when
+			 * pulled high by and external pull-up, will
+			 * inhibit execution of any write request to
+			 * attached eMMC device.
+			 *
+			 * To avoid this problem we configure the pad
+			 * to ALT1/GPIO and avoid driving SD1_WP
+			 * signal high.
+			 */
+			MX51_PAD_GPIO1_1__GPIO1_1		0x0000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_EB2__FEC_MDIO		0x1f5
+			MX51_PAD_NANDF_D9__FEC_RDATA0		0x2180
+			MX51_PAD_EIM_EB3__FEC_RDATA1		0x180
+			MX51_PAD_EIM_CS2__FEC_RDATA2		0x180
+			MX51_PAD_EIM_CS3__FEC_RDATA3		0x180
+			MX51_PAD_EIM_CS4__FEC_RX_ER		0x180
+			MX51_PAD_NANDF_D11__FEC_RX_DV		0x2084
+			MX51_PAD_EIM_CS5__FEC_CRS		0x180
+			MX51_PAD_NANDF_RB2__FEC_COL		0x2180
+			MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x2180
+			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x2004
+			MX51_PAD_NANDF_CS3__FEC_MDC		0x2004
+			MX51_PAD_NANDF_D8__FEC_TDATA0		0x2180
+			MX51_PAD_NANDF_CS4__FEC_TDATA1		0x2004
+			MX51_PAD_NANDF_CS5__FEC_TDATA2		0x2004
+			MX51_PAD_NANDF_CS6__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_EIM_A20__GPIO2_14		0x85
+		>;
+	};
+
+	pinctrl_gpiospi0: gpiospi0grp {
+		fsl,pins = <
+			MX51_PAD_CSI2_D18__GPIO4_11		0x85
+			MX51_PAD_CSI2_D19__GPIO4_12		0x85
+			MX51_PAD_CSI2_HSYNC__GPIO4_14		0x85
+			MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x85
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_ipu_disp1: ipudisp1grp {
+		fsl,pins = <
+			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX51_PAD_DI1_D0_CS__GPIO3_3		0x85
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x1e0
+			MX51_PAD_GPIO1_8__GPIO1_8		0x21e2
+		>;
+	};
+
+	pinctrl_sndgate26mhz: sndgate26mhzgrp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
+		>;
+	};
+
+	pinctrl_swi2c: swi2cgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_2__GPIO1_2		0xc5
+			MX51_PAD_DI1_D1_CS__GPIO3_4		0x400001f5
+		>;
+	};
+
+	pinctrl_swmdio: swmdiogrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D14__GPIO3_26		0x21e6
+			MX51_PAD_NANDF_D15__GPIO3_25		0x21e6
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX51_PAD_CSI1_D8__GPIO3_12		0x04
+			MX51_PAD_CSI1_D9__GPIO3_13		0x85
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			MX51_PAD_UART1_RTS__UART1_RTS		0x1c4
+			MX51_PAD_UART1_CTS__UART1_CTS		0x1c4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0xc5
+			MX51_PAD_UART2_TXD__UART2_TXD		0xc5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usbgate26mhz: usbgate26mhzgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT6__GPIO1_19		0x85
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX51_PAD_USBH1_STP__USBH1_STP		0x0
+			MX51_PAD_USBH1_CLK__USBH1_CLK		0x0
+			MX51_PAD_USBH1_DIR__USBH1_DIR		0x0
+			MX51_PAD_USBH1_NXT__USBH1_NXT		0x0
+			MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x0
+			MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x0
+			MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x0
+			MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x0
+			MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x0
+			MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x0
+			MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x0
+			MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x0
+		>;
+	};
+
+	pinctrl_usbh1phy: usbh1phygrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D0__GPIO4_8		0x85
+		>;
+	};
+
+	pinctrl_usbh2: usbh2grp {
+		fsl,pins = <
+			MX51_PAD_EIM_A26__USBH2_STP		0x0
+			MX51_PAD_EIM_A24__USBH2_CLK		0x0
+			MX51_PAD_EIM_A25__USBH2_DIR		0x0
+			MX51_PAD_EIM_A27__USBH2_NXT		0x0
+			MX51_PAD_EIM_D16__USBH2_DATA0		0x0
+			MX51_PAD_EIM_D17__USBH2_DATA1		0x0
+			MX51_PAD_EIM_D18__USBH2_DATA2		0x0
+			MX51_PAD_EIM_D19__USBH2_DATA3		0x0
+			MX51_PAD_EIM_D20__USBH2_DATA4		0x0
+			MX51_PAD_EIM_D21__USBH2_DATA5		0x0
+			MX51_PAD_EIM_D22__USBH2_DATA6		0x0
+			MX51_PAD_EIM_D23__USBH2_DATA7		0x0
+		>;
+	};
+
+	pinctrl_usbh2phy: usbh2phygrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D1__GPIO4_7		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts
new file mode 100644
index 0000000000000..625f9ac671ae9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx51.dtsi"
+
+/ {
+	model = "ZII SCU2 Mezz Board";
+	compatible = "zii,imx51-scu2-mezz", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio_gpio;
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_mmc_reset>;
+		gpio = <&gpio3 13 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <150000>;
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	mdio_gpio: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_swmdio>;
+		gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio2 6 GPIO_ACTIVE_HIGH>; /* mdio */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "port4";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "port5";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "port6";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "port7";
+				};
+
+				port@4 {
+					reg = <4>;
+					phy-mode = "rev-mii";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "mezz2esb";
+					phy-mode = "sgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled3: led3@3 {
+				reg = <3>;
+				label = "system:red:power";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled4: led4@4 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		compatible = "atmel,at45", "atmel,dataflash";
+		reg = <1>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	status = "okay";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-supply = <&vgen3_reg>;
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+
+	mcu {
+		compatible = "zii,rave-sp-mezz";
+		current-speed = <57600>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog-legacy";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&usb_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb2_reg>;
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_SD2_DATA0__SD1_DAT4		0x20d5
+			MX51_PAD_SD2_DATA1__SD1_DAT5		0x20d5
+			MX51_PAD_SD2_DATA2__SD1_DAT6		0x20d5
+			MX51_PAD_SD2_DATA3__SD1_DAT7		0x20d5
+		>;
+	};
+
+	pinctrl_esdhc4: esdhc4grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_RB1__SD4_CMD		0x400020d5
+			MX51_PAD_NANDF_CS2__SD4_CLK		0x20d5
+			MX51_PAD_NANDF_CS3__SD4_DAT0		0x20d5
+			MX51_PAD_NANDF_CS4__SD4_DAT1		0x20d5
+			MX51_PAD_NANDF_CS5__SD4_DAT2		0x20d5
+			MX51_PAD_NANDF_CS6__SD4_DAT3		0x20d5
+			MX51_PAD_NANDF_D0__GPIO4_8		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x2004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x2004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x2004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x0180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x0180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x20a4
+			MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x20a4
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_DI_GP3__FEC_TX_ER		0x2004
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x2180
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x0085
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x0085
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x0085
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x2004
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x01f5
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x0180
+			MX51_PAD_EIM_A20__GPIO2_14		0x0085
+			MX51_PAD_EIM_A21__GPIO2_15		0x00e5
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x85
+			MX51_PAD_GPIO1_8__GPIO1_8		0xe5
+		>;
+	};
+
+	pinctrl_swmdio: swmdiogrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D22__GPIO2_6		0x100
+			MX51_PAD_EIM_D23__GPIO2_7		0x100
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usb_mmc_reset: usbmmcgrp {
+		fsl,pins = <
+			MX51_PAD_CSI1_D9__GPIO3_13		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts
new file mode 100644
index 0000000000000..19a3b142c9649
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx51.dtsi"
+
+/ {
+	model = "ZII SCU3 ESB board";
+	compatible = "zii,imx51-scu3-esb", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0>;
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_mmc_reset>;
+		gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <150000>;
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled3: led3@3 {
+				reg = <3>;
+				label = "system:red:power";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled4: led4@4 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	fec_mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "port1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "port2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "port3";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "scu2scu";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "esb2host";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "esb2mezz";
+					phy-mode = "sgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					phy-mode = "mii";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&ipu {
+	status = "disabled";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+
+	mcu {
+		compatible = "zii,rave-sp-esb";
+		current-speed = <57600>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog-legacy";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&usb_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb2_reg>;
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_SD2_DATA0__SD1_DAT4		0x20d5
+			MX51_PAD_SD2_DATA1__SD1_DAT5		0x20d5
+			MX51_PAD_SD2_DATA2__SD1_DAT6		0x20d5
+			MX51_PAD_SD2_DATA3__SD1_DAT7		0x20d5
+		>;
+	};
+
+	pinctrl_esdhc4: esdhc4grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_RB1__SD4_CMD		0x400020d5
+			MX51_PAD_NANDF_CS2__SD4_CLK		0x20d5
+			MX51_PAD_NANDF_CS3__SD4_DAT0		0x20d5
+			MX51_PAD_NANDF_CS4__SD4_DAT1		0x20d5
+			MX51_PAD_NANDF_CS5__SD4_DAT2		0x20d5
+			MX51_PAD_NANDF_CS6__SD4_DAT3		0x20d5
+			MX51_PAD_NANDF_D0__GPIO4_8		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x2004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x2004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x2004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x0180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x0180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x20a4
+
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x2180
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x0085
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x0085
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x0085
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x2004
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x01f5
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x0180
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x85
+			MX51_PAD_GPIO1_8__GPIO1_8		0xe5
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_CK__GPIO4_20		0xc5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
+			MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+			MX51_PAD_USBH1_DATA0__UART2_CTS		0x1c5
+			MX51_PAD_USBH1_DATA3__UART2_RTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usb_mmc_reset: usbmmcgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_RXD__GPIO4_19		0x100
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51.dtsi
new file mode 100644
index 0000000000000..ba92a3ea68728
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51.dtsi
@@ -0,0 +1,663 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx51-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		mmc3 = &esdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
+	};
+
+	tzic: tz-interrupt-controller@e0000000 {
+		compatible = "fsl,imx51-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xe0000000 0x4000>;
+	};
+
+	clocks {
+		ckil {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		ckih2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0>;
+			clock-latency = <62500>;
+			clocks = <&clks IMX5_CLK_CPU_PODF>;
+			clock-names = "cpu";
+			operating-points = <
+				166000	1000000
+				600000	1050000
+				800000	1100000
+			>;
+			voltage-tolerance = <5>;
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&tzic>;
+		interrupts = <77>;
+	};
+
+	usbphy0: usbphy0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu_csi0>, <&ipu_csi1>;
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu_di0>, <&ipu_di1>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&tzic>;
+		ranges;
+
+		iram: sram@1ffe0000 {
+			compatible = "mmio-sram";
+			reg = <0x1ffe0000 0x20000>;
+			ranges = <0 0x1ffe0000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.1", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
+		ipu: ipu@40000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx51-ipu";
+			reg = <0x40000000 0x20000000>;
+			interrupts = <11 10>;
+			clocks = <&clks IMX5_CLK_IPU_GATE>,
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 2>;
+
+			ipu_csi0: port@0 {
+				reg = <0>;
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+			};
+
+			ipu_di0: port@2 {
+				reg = <2>;
+
+				ipu_di0_disp1: endpoint {
+				};
+			};
+
+			ipu_di1: port@3 {
+				reg = <3>;
+
+				ipu_di1_disp2: endpoint {
+				};
+			};
+		};
+
+		aips1: bus@70000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x70000000 0x10000000>;
+			ranges;
+
+			spba-bus@70000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x70000000 0x40000>;
+				ranges;
+
+				esdhc1: mmc@70004000 {
+					compatible = "fsl,imx51-esdhc";
+					reg = <0x70004000 0x4000>;
+					interrupts = <1>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					status = "disabled";
+				};
+
+				esdhc2: mmc@70008000 {
+					compatible = "fsl,imx51-esdhc";
+					reg = <0x70008000 0x4000>;
+					interrupts = <2>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				uart3: serial@7000c000 {
+					compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+					reg = <0x7000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 43 5 1>, <&sdma 44 5 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi1: spi@70010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx51-ecspi";
+					reg = <0x70010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@70014000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+					reg = <0x70014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+						 <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				esdhc3: mmc@70020000 {
+					compatible = "fsl,imx51-esdhc";
+					reg = <0x70020000 0x4000>;
+					interrupts = <3>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc4: mmc@70024000 {
+					compatible = "fsl,imx51-esdhc";
+					reg = <0x70024000 0x4000>;
+					interrupts = <4>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+			};
+
+			aipstz1: bridge@73f00000 {
+				compatible = "fsl,imx51-aipstz";
+				reg = <0x73f00000 0x60>;
+			};
+
+			usbotg: usb@73f80000 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@73f80200 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80200 0x0200>;
+				interrupts = <14>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 1>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh2: usb@73f80400 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80400 0x0200>;
+				interrupts = <16>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh3: usb@73f80600 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80600 0x0200>;
+				interrupts = <17>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@73f80800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx51-usbmisc";
+				reg = <0x73f80800 0x200>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+			};
+
+			gpio1: gpio@73f84000 {
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
+				reg = <0x73f84000 0x4000>;
+				interrupts = <50 51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@73f88000 {
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
+				reg = <0x73f88000 0x4000>;
+				interrupts = <52 53>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@73f8c000 {
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
+				reg = <0x73f8c000 0x4000>;
+				interrupts = <54 55>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@73f90000 {
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
+				reg = <0x73f90000 0x4000>;
+				interrupts = <56 57>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@73f94000 {
+				compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
+				reg = <0x73f94000 0x4000>;
+				interrupts = <60>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@73f98000 {
+				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+				reg = <0x73f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+			};
+
+			wdog2: watchdog@73f9c000 {
+				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+				reg = <0x73f9c000 0x4000>;
+				interrupts = <59>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			gpt: timer@73fa0000 {
+				compatible = "fsl,imx51-gpt", "fsl,imx31-gpt";
+				reg = <0x73fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			iomuxc: iomuxc@73fa8000 {
+				compatible = "fsl,imx51-iomuxc";
+				reg = <0x73fa8000 0x4000>;
+			};
+
+			pwm1: pwm@73fb4000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
+				reg = <0x73fb4000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@73fb8000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
+				reg = <0x73fb8000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@73fbc000 {
+				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+				reg = <0x73fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 1>, <&sdma 19 4 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@73fc0000 {
+				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+				reg = <0x73fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 1>, <&sdma 17 4 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			src: reset-controller@73fd0000 {
+				compatible = "fsl,imx51-src";
+				reg = <0x73fd0000 0x4000>;
+				interrupts = <75>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@73fd4000{
+				compatible = "fsl,imx51-ccm";
+				reg = <0x73fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+		};
+
+		aips2: bus@80000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x10000000>;
+			ranges;
+
+			aipstz2: bridge@83f00000 {
+				compatible = "fsl,imx51-aipstz";
+				reg = <0x83f00000 0x60>;
+			};
+
+			iim: efuse@83f98000 {
+				compatible = "fsl,imx51-iim", "fsl,imx27-iim", "syscon";
+				reg = <0x83f98000 0x4000>;
+				interrupts = <69>;
+				clocks = <&clks IMX5_CLK_IIM_GATE>;
+			};
+
+			tigerp: tigerp@83fa0000 {
+				compatible = "fsl,imx51-tigerp";
+				reg = <0x83fa0000 0x28>;
+			};
+
+			owire: owire@83fa4000 {
+				compatible = "fsl,imx51-owire", "fsl,imx21-owire";
+				reg = <0x83fa4000 0x4000>;
+				interrupts = <88>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+				status = "disabled";
+			};
+
+			ecspi2: spi@83fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx51-ecspi";
+				reg = <0x83fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@83fb0000 {
+				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+				reg = <0x83fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+					 <&clks IMX5_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
+			};
+
+			cspi: spi@83fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
+				reg = <0x83fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@83fc4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
+				reg = <0x83fc4000 0x4000>;
+				interrupts = <63>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@83fc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
+				reg = <0x83fc8000 0x4000>;
+				interrupts = <62>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@83fcc000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+				reg = <0x83fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			audmux: audmux@83fd0000 {
+				compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
+				reg = <0x83fd0000 0x4000>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				clock-names = "audmux";
+				status = "disabled";
+			};
+
+			m4if: m4if@83fd8000 {
+				compatible = "fsl,imx51-m4if";
+				reg = <0x83fd8000 0x1000>;
+			};
+
+			weim: weim@83fda000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx51-weim";
+				reg = <0x83fda000 0x1000>;
+				clocks = <&clks IMX5_CLK_EMI_SLOW_GATE>;
+				ranges = <
+					0 0 0xb0000000 0x08000000
+					1 0 0xb8000000 0x08000000
+					2 0 0xc0000000 0x08000000
+					3 0 0xc8000000 0x04000000
+					4 0 0xcc000000 0x02000000
+					5 0 0xce000000 0x02000000
+				>;
+				status = "disabled";
+			};
+
+			nfc: nand@83fdb000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx51-nand";
+				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
+				interrupts = <8>;
+				clocks = <&clks IMX5_CLK_NFC_GATE>;
+				status = "disabled";
+			};
+
+			pata: pata@83fe0000 {
+				compatible = "fsl,imx51-pata", "fsl,imx27-pata";
+				reg = <0x83fe0000 0x4000>;
+				interrupts = <70>;
+				clocks = <&clks IMX5_CLK_PATA_GATE>;
+				status = "disabled";
+			};
+
+			ssi3: ssi@83fe8000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+				reg = <0x83fe8000 0x4000>;
+				interrupts = <96>;
+				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 46 0 0>,
+				       <&sdma 47 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			fec: ethernet@83fec000 {
+				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+				reg = <0x83fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			vpu: vpu@83ff4000 {
+				compatible = "fsl,imx51-vpu", "cnm,codahx4";
+				reg = <0x83ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
+					 <&clks IMX5_CLK_VPU_GATE>;
+				clock-names = "per", "ahb";
+				resets = <&src 1>;
+				iram = <&iram>;
+			};
+
+			sahara: crypto@83ff8000 {
+				compatible = "fsl,imx53-sahara", "fsl,imx51-sahara";
+				reg = <0x83ff8000 0x4000>;
+				interrupts = <19 20>;
+				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+				clock-names = "ipg", "ahb";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ard.dts b/arch/arm/boot/dts/nxp/imx/imx53-ard.dts
new file mode 100644
index 0000000000000..23a7492e29294
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-ard.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx53.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Automotive Reference Design Board";
+	compatible = "fsl,imx53-ard", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x40000000>;
+	};
+
+	eim-cs1@f4000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,eim-bus", "simple-bus";
+		reg = <0xf4000000 0x3ff0000>;
+		ranges;
+
+		ethernet@f4000000 {
+			compatible = "smsc,lan9220", "smsc,lan9115";
+			reg = <0xf4000000 0x2000000>;
+			phy-mode = "mii";
+			interrupt-parent = <&gpio2>;
+			interrupts = <31 0x8>;
+			reg-io-width = <4>;
+			/*
+			 * VDD33A and VDDVARIO of LAN9220 are supplied by
+			 * SW4_3V3 of LTC3589.  Before the regulator driver
+			 * for this PMIC is available, we use a fixed dummy
+			 * 3V3 regulator to get LAN9220 driver probing work.
+			 */
+			vdd33a-supply = <&reg_3p3v>;
+			vddvario-supply = <&reg_3p3v>;
+			smsc,irq-push-pull;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio5 10 0>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio5 11 0>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		key-program {
+			label = "Program";
+			gpios = <&gpio5 12 0>;
+			linux,code = <KEY_PROGRAM >;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio5 13 0>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 0 0>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-ard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_1__GPIO1_1             0x80000000
+				MX53_PAD_GPIO_9__GPIO1_9             0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31           0x80000000
+				MX53_PAD_GPIO_10__GPIO4_0            0x80000000
+				MX53_PAD_DISP0_DAT16__GPIO5_10	     0x80000000
+				MX53_PAD_DISP0_DAT17__GPIO5_11       0x80000000
+				MX53_PAD_DISP0_DAT18__GPIO5_12       0x80000000
+				MX53_PAD_DISP0_DAT19__GPIO5_13       0x80000000
+				MX53_PAD_EIM_D16__EMI_WEIM_D_16      0x80000000
+				MX53_PAD_EIM_D17__EMI_WEIM_D_17      0x80000000
+				MX53_PAD_EIM_D18__EMI_WEIM_D_18      0x80000000
+				MX53_PAD_EIM_D19__EMI_WEIM_D_19      0x80000000
+				MX53_PAD_EIM_D20__EMI_WEIM_D_20      0x80000000
+				MX53_PAD_EIM_D21__EMI_WEIM_D_21      0x80000000
+				MX53_PAD_EIM_D22__EMI_WEIM_D_22      0x80000000
+				MX53_PAD_EIM_D23__EMI_WEIM_D_23      0x80000000
+				MX53_PAD_EIM_D24__EMI_WEIM_D_24      0x80000000
+				MX53_PAD_EIM_D25__EMI_WEIM_D_25      0x80000000
+				MX53_PAD_EIM_D26__EMI_WEIM_D_26      0x80000000
+				MX53_PAD_EIM_D27__EMI_WEIM_D_27      0x80000000
+				MX53_PAD_EIM_D28__EMI_WEIM_D_28      0x80000000
+				MX53_PAD_EIM_D29__EMI_WEIM_D_29      0x80000000
+				MX53_PAD_EIM_D30__EMI_WEIM_D_30      0x80000000
+				MX53_PAD_EIM_D31__EMI_WEIM_D_31      0x80000000
+				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000
+				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000
+				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000
+				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000
+				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000
+				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000
+				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000
+				MX53_PAD_EIM_OE__EMI_WEIM_OE	     0x80000000
+				MX53_PAD_EIM_RW__EMI_WEIM_RW	     0x80000000
+				MX53_PAD_EIM_CS1__EMI_WEIM_CS_1	     0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_PATA_DATA8__ESDHC1_DAT4	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC1_DAT5	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC1_DAT6	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC1_DAT7	0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
new file mode 100644
index 0000000000000..055d23a9aee7c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2017 Beckhoff Automation GmbH & Co. KG
+ * based on imx53-qsb.dts
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+	model = "Beckhoff CX9020 Embedded PC";
+	compatible = "bhf,cx9020", "fsl,imx53";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	display-0 {
+		#address-cells =<1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
+		};
+	};
+
+	dvi-connector {
+		compatible = "dvi-connector";
+		ddc-i2c-bus = <&i2c2>;
+		digital;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-converter {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&display0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-pwr-r {
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-pwr-g {
+			gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-pwr-b {
+			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-sd1-b {
+			linux,default-trigger = "mmc0";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-sd2-b {
+			linux,default-trigger = "mmc1";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulator-3p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P2V";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_0__CCM_CLKO               0x1c4
+			MX53_PAD_GPIO_16__I2C3_SDA              0x1c4
+			MX53_PAD_EIM_D22__GPIO3_22              0x1c4
+			MX53_PAD_EIM_D23__GPIO3_23              0x1e4
+			MX53_PAD_EIM_D24__GPIO3_24              0x1e4
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			MX53_PAD_GPIO_1__ESDHC1_CD              0x1c4
+			MX53_PAD_EIM_D17__GPIO3_17              0x1e4
+			MX53_PAD_GPIO_3__GPIO1_3                0x1c4
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+			MX53_PAD_GPIO_4__ESDHC2_CD              0x1e4
+			MX53_PAD_EIM_D20__GPIO3_20              0x1e4
+			MX53_PAD_GPIO_8__GPIO1_8                0x1c4
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x4
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
+			MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
+		>;
+	};
+
+	pinctrl_ipu_disp0: ipudisp0grp {
+		fsl,pins = <
+			MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+			MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+			MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+			MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+			MX53_PAD_DI0_PIN4__IPU_DI0_PIN4		0x5
+			MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+			MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+			MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+			MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+			MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+			MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+			MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+			MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+			MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+			MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+			MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+			MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+			MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+			MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+			MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+			MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+			MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+			MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+			MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+			MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+			MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+			MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+			MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+			MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D26__UART2_RXD_MUX	0x1e4
+			MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4
+			MX53_PAD_EIM_D28__UART2_RTS 0x1e4
+			MX53_PAD_EIM_D29__UART2_CTS 0x1e4
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts b/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts
new file mode 100644
index 0000000000000..0e7f071fd10e2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+	model = "K+P imx53 DDC";
+	compatible = "kiebackpeter,imx53-ddc", "fsl,imx53";
+
+	backlight_lcd: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		power-supply = <&reg_backlight>;
+		brightness-levels = <0 24 28 32 36
+				     40 44 48 52 56
+				     60 64 68 72 76
+				     80 84 88 92 96 100>;
+		default-brightness-level = <20>;
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp>;
+
+		port@0 {
+			reg = <0>;
+
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "koe,tx14d24vm1bpa";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-supply";
+		regulator-min-microvolt = <15000000>;
+		regulator-max-microvolt = <15000000>;
+		regulator-always-on;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c3 {
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+	};
+
+	gpio-expander2@21 {
+		compatible = "nxp,pcf8574";
+		reg = <0x21>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&iomuxc {
+	imx53-kp-ddc {
+		pinctrl_disp: dispgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK      0x4
+				MX53_PAD_EIM_DA10__IPU_DI1_PIN15        0x4
+				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0       0x4
+				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1       0x4
+				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2       0x4
+				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3       0x4
+				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4       0x4
+				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5       0x4
+				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6       0x4
+				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7       0x4
+				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8       0x4
+				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9       0x4
+				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10      0x4
+				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11      0x4
+				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12      0x4
+				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13      0x4
+				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14      0x4
+				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15      0x4
+				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16      0x4
+				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17      0x4
+				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18      0x4
+				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19      0x4
+				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20      0x4
+				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21      0x4
+				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22      0x4
+				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23      0x4
+				MX53_PAD_GPIO_1__PWM2_PWMO 0x4
+			>;
+		};
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&pmic {
+	fsl,mc13xxx-uses-touch;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp-hsc.dts b/arch/arm/boot/dts/nxp/imx/imx53-kp-hsc.dts
new file mode 100644
index 0000000000000..6e3d71baac0fb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-kp-hsc.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+	model = "K+P imx53 HSC";
+	compatible = "kiebackpeter,imx53-hsc", "fsl,imx53";
+};
+
+&fec {
+	status = "okay";
+
+	fixed-link { /* RMII fixed link to LAN9303 */
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&i2c3 {
+	switch: switch@a {
+		compatible = "smsc,lan9303-i2c";
+		reg = <0xa>;
+		reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+		reset-duration = <400>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 { /* RMII fixed link to master */
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&fec>;
+			};
+
+			port@1 { /* external port 1 */
+				reg = <1>;
+				label = "lan1";
+			};
+
+			port@2 { /* external port 2 */
+				reg = <2>;
+				label = "lan2";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
new file mode 100644
index 0000000000000..4508f34139a06
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-tqma53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	buzzer {
+		compatible = "pwm-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buzzer>;
+		pwms = <&pwm1 0 500000>;
+	};
+
+	gpio-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+		button-kalt {
+			label = "Kaltstart";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-pwr {
+			label = "PowerFailInterrupt";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-bus {
+			label = "bus";
+			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		led-error {
+			label = "error";
+			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		led-flash {
+			label = "flash";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	gpio-expander1@22 {
+		compatible = "nxp,pcf8574";
+		reg = <0x22>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kp_common>;
+
+	imx53-kp-common {
+		pinctrl_buzzer: buzzergrp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4
+			>;
+		};
+
+		pinctrl_gpiobuttons: gpiobuttonsgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_RW__GPIO2_26 0x1e4
+				MX53_PAD_EIM_D22__GPIO3_22 0x1e4
+			>;
+		};
+
+		pinctrl_kp_common: kpcommongrp {
+			fsl,pins = <
+				MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
+				MX53_PAD_GPIO_19__GPIO4_5  0x1e4
+				MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4
+				MX53_PAD_PATA_DATA7__GPIO2_7 0xe0
+				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4
+				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4
+				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4
+				MX53_PAD_EIM_D17__GPIO3_17 0x1e4
+				MX53_PAD_EIM_D18__GPIO3_18 0x1e4
+				MX53_PAD_EIM_D21__GPIO3_21 0x1e4
+				MX53_PAD_EIM_D29__GPIO3_29 0x1e4
+				MX53_PAD_EIM_DA11__GPIO3_11 0x1e4
+				MX53_PAD_EIM_DA13__GPIO3_13 0x1e4
+				MX53_PAD_EIM_DA14__GPIO3_14 0x1e4
+				MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4
+				MX53_PAD_SD1_CMD__GPIO1_18 0x1e4
+				MX53_PAD_SD1_CLK__GPIO1_20 0x1e4
+			>;
+		};
+
+		pinctrl_leds: ledgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_EB2__GPIO2_30 0x1d4
+				MX53_PAD_EIM_D28__GPIO3_28 0x1d4
+				MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4
+				MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4
+			>;
+		};
+	};
+};
+
+&pinctrl_uart1 {
+	fsl,pins = <
+		MX53_PAD_EIM_D23__GPIO3_23 0x1e4
+		MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
+		MX53_PAD_EIM_D24__GPIO3_24 0x1e4
+		MX53_PAD_EIM_D25__GPIO3_25 0x1e4
+		MX53_PAD_EIM_D19__GPIO3_19 0x1e4
+		MX53_PAD_EIM_D20__GPIO3_20 0x1e4
+	>;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
new file mode 100644
index 0000000000000..fe5e0d308e994
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Aries/DENX M53";
+	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p2v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_backlight: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "lcd-supply";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@41 {
+		compatible = "st,stmpe610";
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		interrupts = <6 0x0>;
+		interrupt-parent = <&gpio7>;
+		irq-trigger = <0x1>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <3>;
+			st,touch-det-delay = <3>;
+			st,settling = <4>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
+				MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts
new file mode 100644
index 0000000000000..2bd2432d317ff
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+
+/ {
+	model = "Aries/DENX M53EVK";
+	compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
+
+	display1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		display-timings {
+			800x480p60 {
+				native-mode;
+				clock-frequency = <31500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <40>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				vback-porch = <33>;
+				vfront-porch = <9>;
+				vsync-len = <3>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 3000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&reg_backlight>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio>;
+
+		led-user1 {
+			label = "user1";
+			gpios = <&gpio2 8 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			label = "user2";
+			gpios = <&gpio2 9 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usbh1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 2 0>;
+		};
+
+		reg_usb_otg_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 4 0>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx53-m53evk-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-m53evk-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Ext Spk", "LINE_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		pinctrl_usb: usbgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_2__GPIO1_2		0x80000000
+				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_4__GPIO1_4		0x000b0
+			>;
+		};
+
+		led_pin_gpio: led_gpio {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
+				MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
+				MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
+				MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
+				MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
+				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_ipu_disp1: ipudisp1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
+				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
+				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
+				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
+				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
+				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
+				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
+				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
+				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
+				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
+				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
+				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
+				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
+				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
+				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
+				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
+				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
+				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
+				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
+				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
+				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
+				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
+				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
+				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
+				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
+				MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
+				MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
+				MX53_PAD_EIM_DA15__IPU_DI1_PIN1		0x5
+				MX53_PAD_EIM_DA11__IPU_DI1_PIN2		0x5
+				MX53_PAD_EIM_DA12__IPU_DI1_PIN3		0x5
+				MX53_PAD_EIM_A25__IPU_DI1_PIN12		0x5
+				MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+			>;
+		};
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts
new file mode 100644
index 0000000000000..4d77b6077fc1b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts
@@ -0,0 +1,517 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+
+/ {
+	model = "MENLO M53 EMBEDDED DEVICE";
+	compatible = "menlo,m53menlo", "fsl,imx53";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_power_button>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power button";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pinctrl_power_out>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user1 {
+			label = "TestLed601";
+			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-user2 {
+			label = "TestLed602";
+			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-eth {
+			label = "EthLedYe";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "netdev";
+		};
+	};
+
+	lvds-decoder {
+		compatible = "ti,ds90cf364a", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0dh6";
+		pinctrl-0 = <&pinctrl_display_gpio>;
+		pinctrl-names = "default";
+		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_decoder_out>;
+			};
+		};
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pinctrl_beeper>;
+		gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 0>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
+			  <&clks IMX5_CLK_CKO1_PODF>,
+			  <&clks IMX5_CLK_CKO1>;
+	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
+	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev@0 {
+		compatible = "menlo,m53cpld";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+	};
+
+	spidev@1 {
+		compatible = "menlo,m53cpld";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"TestPin_SV2_3", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
+		"", "CPLD_JTAG_TDO", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "CPLD_JTAG_TCK", "KBD_intK",
+		"CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
+		"CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
+		"CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "",
+		"CPLD_reset", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "USB-OTG_OverCurrent", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	dac@60 {
+		compatible = "microchip,mcp4725";
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	touchscreen@41 {
+		status = "disabled";
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_19__CCM_CLKO		0x1e4
+				MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x1e4
+				MX53_PAD_CSI0_DAT4__GPIO5_22		0x1e4
+				MX53_PAD_CSI0_DAT5__GPIO5_23		0x1c4
+				MX53_PAD_CSI0_DAT6__GPIO5_24		0x1e4
+				MX53_PAD_CSI0_DAT7__GPIO5_25		0x1e4
+				MX53_PAD_CSI0_DAT8__GPIO5_26		0x1e4
+				MX53_PAD_CSI0_DAT9__GPIO5_27		0x1c4
+				MX53_PAD_CSI0_DAT10__GPIO5_28		0x1e4
+				MX53_PAD_CSI0_DAT11__GPIO5_29		0x1e4
+				MX53_PAD_PATA_DATA11__GPIO2_11		0x1e4
+				MX53_PAD_EIM_D24__GPIO3_24		0x1e4
+				MX53_PAD_EIM_D25__GPIO3_25		0x1e4
+				MX53_PAD_EIM_D29__GPIO3_29		0x1e4
+				MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x1e4
+				MX53_PAD_CSI0_VSYNC__GPIO5_21		0x1e4
+				MX53_PAD_CSI0_DAT18__GPIO6_4		0x1c4
+				MX53_PAD_PATA_DATA8__GPIO2_8		0x1e4
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT15__GPIO6_1		0x1c4
+				MX53_PAD_CSI0_DAT16__GPIO6_2		0x1c4
+			>;
+		};
+
+		pinctrl_beeper: beepergrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT17__GPIO6_3		0x1c4
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__CAN1_TXCAN		0x1c4
+				MX53_PAD_GPIO_8__CAN1_RXCAN		0x1c4
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x1e4
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x1c4
+			>;
+		};
+
+		pinctrl_display_gpio: display-gpiogrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__GPIO5_30		0x1c4 /* Reset */
+				MX53_PAD_CSI0_MCLK__GPIO5_19		0x1e4 /* Int-K */
+				MX53_PAD_CSI0_DAT13__GPIO5_31		0x1c4 /* Int-I */
+
+				MX53_PAD_CSI0_DAT14__GPIO6_0		0x1c4 /* Power down */
+			>;
+		};
+
+		pinctrl_edt_ft5x06: edt-ft5x06grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA9__GPIO2_9		0x1e4 /* Reset */
+				MX53_PAD_CSI0_DAT19__GPIO6_5		0x1c4 /* Interrupt */
+				MX53_PAD_PATA_DATA10__GPIO2_10		0x1e4 /* Wake */
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_CS0__ECSPI2_SCLK		0xe4
+				MX53_PAD_EIM_OE__ECSPI2_MISO		0xe4
+				MX53_PAD_EIM_CS1__ECSPI2_MOSI		0xe4
+				MX53_PAD_EIM_RW__GPIO2_26		0xe4
+				MX53_PAD_EIM_LBA__GPIO2_27		0xe4
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1e4
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1e4
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1e4
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1e4
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1e4
+				MX53_PAD_GPIO_1__GPIO1_1		0x1c4
+				MX53_PAD_GPIO_9__GPIO1_9		0x1e4
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
+				MX53_PAD_PATA_DA_1__GPIO7_7		0x1e4
+				MX53_PAD_EIM_EB3__GPIO2_31		0x1e4
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
+				MX53_PAD_GPIO_5__I2C3_SCL		0x400001e4
+			>;
+		};
+
+		pinctrl_lvds0: lvds0grp {
+			/* LVDS pins only have pin mux configuration */
+			fsl,pins = <
+				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
+				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
+				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
+				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
+				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
+			>;
+		};
+
+		pinctrl_power_button: powerbutgrp {
+			fsl,pins = <
+				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
+			>;
+		};
+
+		pinctrl_power_out: poweroutgrp {
+			fsl,pins = <
+				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+				MX53_PAD_PATA_IORDY__UART1_RTS		0x1e4
+				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DIOR__UART2_RTS		0x1e4
+				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1e4
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+			>;
+		};
+
+		pinctrl_usb: usbgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_2__GPIO1_2		0x1c4
+				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1c4
+				MX53_PAD_GPIO_4__GPIO1_4		0x1c4
+				MX53_PAD_GPIO_18__GPIO7_13		0x1c4
+			>;
+		};
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		reg = <0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@2 {
+			reg = <2>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_decoder_in>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
new file mode 100644
index 0000000000000..09eee0dd44c12
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx53-tqma53.dtsi"
+
+/ {
+	model = "TQ MBa53 starter kit";
+	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
+		default-brightness-level = <10>;
+		enable-gpios = <&gpio7 7 0>;
+		power-supply = <&reg_backlight>;
+	};
+
+	disp1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp1_1>;
+		interface-pix-fmt = "rgb24";
+		status = "disabled";
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_backlight: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "lcd-supply";
+			gpio = <&gpio2 5 0>;
+			startup-delay-us = <5000>;
+		};
+
+		reg_3p2v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "tq,imx53-mba53-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-mba53-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds1_1>;
+	status = "disabled";
+};
+
+&iomuxc {
+	lvds1 {
+		pinctrl_lvds1_1: lvds1-grp1 {
+			fsl,pins = <
+				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+			>;
+		};
+
+		pinctrl_lvds1_2: lvds1-grp2 {
+			fsl,pins = <
+				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+			>;
+		};
+	};
+
+	disp1 {
+		pinctrl_disp1_1: disp1-grp1 {
+			fsl,pins = <
+				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
+				MX53_PAD_EIM_DA10__IPU_DI1_PIN15   0x80000000 /* DISP1_DRDY */
+				MX53_PAD_EIM_D23__IPU_DI1_PIN2     0x80000000 /* DISP1_HSYNC */
+				MX53_PAD_EIM_EB3__IPU_DI1_PIN3     0x80000000 /* DISP1_VSYNC */
+				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
+				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
+				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
+				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
+				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
+				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
+				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
+				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
+				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
+				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
+				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
+				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
+				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
+				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
+				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9  0x80000000
+				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8  0x80000000
+				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7  0x80000000
+				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6  0x80000000
+				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5  0x80000000
+				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4  0x80000000
+				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3  0x80000000
+				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2  0x80000000
+				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1  0x80000000
+				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0  0x80000000
+			>;
+		};
+	};
+
+	tve {
+		pinctrl_vga_sync_1: vgasync-grp1 {
+			fsl,pins = <
+				/* VGA_VSYNC, HSYNC with max drive strength */
+				MX53_PAD_EIM_CS1__IPU_DI1_PIN6	   0xe6
+				MX53_PAD_EIM_DA15__IPU_DI1_PIN4	   0xe6
+			>;
+		};
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&cspi {
+	status = "okay";
+};
+
+&audmux {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+};
+
+&i2c2 {
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+	};
+
+	expander: pca9554@20 {
+		compatible = "pca9554";
+		reg = <0x20>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	sensor2: lm75@49 {
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+};
+
+&fec {
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&esdhc2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ecspi1 {
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&tve {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vga_sync_1>;
+	ddc-i2c-bus = <&i2c3>;
+	fsl,tve-mode = "vga";
+	fsl,hsync-pin = <4>;
+	fsl,vsync-pin = <6>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx53-pinfunc.h
new file mode 100644
index 0000000000000..67bd06610fdff
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-pinfunc.h
@@ -0,0 +1,1189 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX53_PINFUNC_H
+#define __DTS_IMX53_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX53_PAD_GPIO_19__KPP_COL_5				0x020 0x348 0x840 0x0 0x0
+#define MX53_PAD_GPIO_19__GPIO4_5				0x020 0x348 0x000 0x1 0x0
+#define MX53_PAD_GPIO_19__CCM_CLKO				0x020 0x348 0x000 0x2 0x0
+#define MX53_PAD_GPIO_19__SPDIF_OUT1				0x020 0x348 0x000 0x3 0x0
+#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2			0x020 0x348 0x000 0x4 0x0
+#define MX53_PAD_GPIO_19__ECSPI1_RDY				0x020 0x348 0x000 0x5 0x0
+#define MX53_PAD_GPIO_19__FEC_TDATA_3				0x020 0x348 0x000 0x6 0x0
+#define MX53_PAD_GPIO_19__SRC_INT_BOOT				0x020 0x348 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL0__KPP_COL_0				0x024 0x34c 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL0__GPIO4_6				0x024 0x34c 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC			0x024 0x34c 0x758 0x2 0x0
+#define MX53_PAD_KEY_COL0__UART4_TXD_MUX			0x024 0x34c 0x000 0x4 0x0
+#define MX53_PAD_KEY_COL0__ECSPI1_SCLK				0x024 0x34c 0x79c 0x5 0x0
+#define MX53_PAD_KEY_COL0__FEC_RDATA_3				0x024 0x34c 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST			0x024 0x34c 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW0__KPP_ROW_0				0x028 0x350 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW0__GPIO4_7				0x028 0x350 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD			0x028 0x350 0x74c 0x2 0x0
+#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX			0x028 0x350 0x890 0x4 0x1
+#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI				0x028 0x350 0x7a4 0x5 0x0
+#define MX53_PAD_KEY_ROW0__FEC_TX_ER				0x028 0x350 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL1__KPP_COL_1				0x02c 0x354 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL1__GPIO4_8				0x02c 0x354 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS			0x02c 0x354 0x75c 0x2 0x0
+#define MX53_PAD_KEY_COL1__UART5_TXD_MUX			0x02c 0x354 0x000 0x4 0x0
+#define MX53_PAD_KEY_COL1__ECSPI1_MISO				0x02c 0x354 0x7a0 0x5 0x0
+#define MX53_PAD_KEY_COL1__FEC_RX_CLK				0x02c 0x354 0x808 0x6 0x0
+#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY			0x02c 0x354 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW1__KPP_ROW_1				0x030 0x358 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW1__GPIO4_9				0x030 0x358 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD			0x030 0x358 0x748 0x2 0x0
+#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX			0x030 0x358 0x898 0x4 0x1
+#define MX53_PAD_KEY_ROW1__ECSPI1_SS0				0x030 0x358 0x7a8 0x5 0x0
+#define MX53_PAD_KEY_ROW1__FEC_COL				0x030 0x358 0x800 0x6 0x0
+#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID			0x030 0x358 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL2__KPP_COL_2				0x034 0x35c 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL2__GPIO4_10				0x034 0x35c 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL2__CAN1_TXCAN				0x034 0x35c 0x000 0x2 0x0
+#define MX53_PAD_KEY_COL2__FEC_MDIO				0x034 0x35c 0x804 0x4 0x0
+#define MX53_PAD_KEY_COL2__ECSPI1_SS1				0x034 0x35c 0x7ac 0x5 0x0
+#define MX53_PAD_KEY_COL2__FEC_RDATA_2				0x034 0x35c 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE			0x034 0x35c 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW2__KPP_ROW_2				0x038 0x360 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW2__GPIO4_11				0x038 0x360 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW2__CAN1_RXCAN				0x038 0x360 0x760 0x2 0x0
+#define MX53_PAD_KEY_ROW2__FEC_MDC				0x038 0x360 0x000 0x4 0x0
+#define MX53_PAD_KEY_ROW2__ECSPI1_SS2				0x038 0x360 0x7b0 0x5 0x0
+#define MX53_PAD_KEY_ROW2__FEC_TDATA_2				0x038 0x360 0x000 0x6 0x0
+#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR			0x038 0x360 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL3__KPP_COL_3				0x03c 0x364 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL3__GPIO4_12				0x03c 0x364 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL3__USBOH3_H2_DP				0x03c 0x364 0x000 0x2 0x0
+#define MX53_PAD_KEY_COL3__SPDIF_IN1				0x03c 0x364 0x870 0x3 0x0
+#define MX53_PAD_KEY_COL3__I2C2_SCL				0x03c 0x364 0x81c 0x4 0x0
+#define MX53_PAD_KEY_COL3__ECSPI1_SS3				0x03c 0x364 0x7b4 0x5 0x0
+#define MX53_PAD_KEY_COL3__FEC_CRS				0x03c 0x364 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK			0x03c 0x364 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW3__KPP_ROW_3				0x040 0x368 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW3__GPIO4_13				0x040 0x368 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM				0x040 0x368 0x000 0x2 0x0
+#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK			0x040 0x368 0x768 0x3 0x0
+#define MX53_PAD_KEY_ROW3__I2C2_SDA				0x040 0x368 0x820 0x4 0x0
+#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT			0x040 0x368 0x000 0x5 0x0
+#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP				0x040 0x368 0x77c 0x6 0x0
+#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0			0x040 0x368 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL4__KPP_COL_4				0x044 0x36c 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL4__GPIO4_14				0x044 0x36c 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL4__CAN2_TXCAN				0x044 0x36c 0x000 0x2 0x0
+#define MX53_PAD_KEY_COL4__IPU_SISG_4				0x044 0x36c 0x000 0x3 0x0
+#define MX53_PAD_KEY_COL4__UART5_RTS				0x044 0x36c 0x894 0x4 0x0
+#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC			0x044 0x36c 0x89c 0x5 0x0
+#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1			0x044 0x36c 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW4__KPP_ROW_4				0x048 0x370 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW4__GPIO4_15				0x048 0x370 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW4__CAN2_RXCAN				0x048 0x370 0x764 0x2 0x0
+#define MX53_PAD_KEY_ROW4__IPU_SISG_5				0x048 0x370 0x000 0x3 0x0
+#define MX53_PAD_KEY_ROW4__UART5_CTS				0x048 0x370 0x000 0x4 0x0
+#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR			0x048 0x370 0x000 0x5 0x0
+#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID			0x048 0x370 0x000 0x7 0x0
+#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK			0x04c 0x378 0x000 0x0 0x0
+#define MX53_PAD_DI0_DISP_CLK__GPIO4_16				0x04c 0x378 0x000 0x1 0x0
+#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR			0x04c 0x378 0x000 0x2 0x0
+#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0		0x04c 0x378 0x000 0x5 0x0
+#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0			0x04c 0x378 0x000 0x6 0x0
+#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID			0x04c 0x378 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15			0x050 0x37c 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN15__GPIO4_17				0x050 0x37c 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC			0x050 0x37c 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1		0x050 0x37c 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1			0x050 0x37c 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID			0x050 0x37c 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2				0x054 0x380 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN2__GPIO4_18				0x054 0x380 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD			0x054 0x380 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2		0x054 0x380 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2			0x054 0x380 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION			0x054 0x380 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3				0x058 0x384 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN3__GPIO4_19				0x058 0x384 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS			0x058 0x384 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3		0x058 0x384 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3			0x058 0x384 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG			0x058 0x384 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4				0x05c 0x388 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN4__GPIO4_20				0x05c 0x388 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD			0x05c 0x388 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN4__ESDHC1_WP				0x05c 0x388 0x7fc 0x3 0x0
+#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD			0x05c 0x388 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4			0x05c 0x388 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT		0x05c 0x388 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0			0x060 0x38c 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT0__GPIO4_21				0x060 0x38c 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT0__CSPI_SCLK				0x060 0x38c 0x780 0x2 0x0
+#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0		0x060 0x38c 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN		0x060 0x38c 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5			0x060 0x38c 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY			0x060 0x38c 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1			0x064 0x390 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT1__GPIO4_22				0x064 0x390 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT1__CSPI_MOSI				0x064 0x390 0x788 0x2 0x0
+#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1		0x064 0x390 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL	0x064 0x390 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6			0x064 0x390 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID			0x064 0x390 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2			0x068 0x394 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT2__GPIO4_23				0x068 0x394 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT2__CSPI_MISO				0x068 0x394 0x784 0x2 0x0
+#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2		0x068 0x394 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE			0x068 0x394 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7			0x068 0x394 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE			0x068 0x394 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3			0x06c 0x398 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT3__GPIO4_24				0x06c 0x398 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT3__CSPI_SS0				0x06c 0x398 0x78c 0x2 0x0
+#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3		0x06c 0x398 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR		0x06c 0x398 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8			0x06c 0x398 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR			0x06c 0x398 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4			0x070 0x39c 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT4__GPIO4_25				0x070 0x39c 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT4__CSPI_SS1				0x070 0x39c 0x790 0x2 0x0
+#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4		0x070 0x39c 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB			0x070 0x39c 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9			0x070 0x39c 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK			0x070 0x39c 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5			0x074 0x3a0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT5__GPIO4_26				0x074 0x3a0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT5__CSPI_SS2				0x074 0x3a0 0x794 0x2 0x0
+#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5		0x074 0x3a0 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS		0x074 0x3a0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10			0x074 0x3a0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0		0x074 0x3a0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6			0x078 0x3a4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT6__GPIO4_27				0x078 0x3a4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT6__CSPI_SS3				0x078 0x3a4 0x798 0x2 0x0
+#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6		0x078 0x3a4 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE		0x078 0x3a4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11			0x078 0x3a4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1		0x078 0x3a4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7			0x07c 0x3a8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT7__GPIO4_28				0x07c 0x3a8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT7__CSPI_RDY				0x07c 0x3a8 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7		0x07c 0x3a8 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0		0x07c 0x3a8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12			0x07c 0x3a8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID			0x07c 0x3a8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8			0x080 0x3ac 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT8__GPIO4_29				0x080 0x3ac 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT8__PWM1_PWMO				0x080 0x3ac 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B			0x080 0x3ac 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1		0x080 0x3ac 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13			0x080 0x3ac 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID			0x080 0x3ac 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9			0x084 0x3b0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT9__GPIO4_30				0x084 0x3b0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT9__PWM2_PWMO				0x084 0x3b0 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B			0x084 0x3b0 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2		0x084 0x3b0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14			0x084 0x3b0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0			0x084 0x3b0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10			0x088 0x3b4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT10__GPIO4_31				0x088 0x3b4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP			0x088 0x3b4 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3	0x088 0x3b4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15			0x088 0x3b4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1			0x088 0x3b4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11			0x08c 0x3b8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT11__GPIO5_5				0x08c 0x3b8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT			0x08c 0x3b8 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4	0x08c 0x3b8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16			0x08c 0x3b8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2			0x08c 0x3b8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12			0x090 0x3bc 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT12__GPIO5_6				0x090 0x3bc 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK			0x090 0x3bc 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5	0x090 0x3bc 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17			0x090 0x3bc 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3			0x090 0x3bc 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13			0x094 0x3c0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT13__GPIO5_7				0x094 0x3c0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS			0x094 0x3c0 0x754 0x3 0x0
+#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0	0x094 0x3c0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18			0x094 0x3c0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4			0x094 0x3c0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14			0x098 0x3c4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT14__GPIO5_8				0x098 0x3c4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC			0x098 0x3c4 0x750 0x3 0x0
+#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1	0x098 0x3c4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19			0x098 0x3c4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5			0x098 0x3c4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15			0x09c 0x3c8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT15__GPIO5_9				0x09c 0x3c8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1			0x09c 0x3c8 0x7ac 0x2 0x1
+#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1			0x09c 0x3c8 0x7c8 0x3 0x0
+#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2	0x09c 0x3c8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20			0x09c 0x3c8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6			0x09c 0x3c8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16			0x0a0 0x3cc 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT16__GPIO5_10				0x0a0 0x3cc 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI			0x0a0 0x3cc 0x7c0 0x2 0x0
+#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC			0x0a0 0x3cc 0x758 0x3 0x1
+#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0			0x0a0 0x3cc 0x868 0x4 0x0
+#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3	0x0a0 0x3cc 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21			0x0a0 0x3cc 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7			0x0a0 0x3cc 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17			0x0a4 0x3d0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT17__GPIO5_11				0x0a4 0x3d0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO			0x0a4 0x3d0 0x7bc 0x2 0x0
+#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD			0x0a4 0x3d0 0x74c 0x3 0x1
+#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1			0x0a4 0x3d0 0x86c 0x4 0x0
+#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4	0x0a4 0x3d0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22			0x0a4 0x3d0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18			0x0a8 0x3d4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT18__GPIO5_12				0x0a8 0x3d4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0			0x0a8 0x3d4 0x7c4 0x2 0x0
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS			0x0a8 0x3d4 0x75c 0x3 0x1
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS			0x0a8 0x3d4 0x73c 0x4 0x0
+#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5	0x0a8 0x3d4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23			0x0a8 0x3d4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2			0x0a8 0x3d4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19			0x0ac 0x3d8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT19__GPIO5_13				0x0ac 0x3d8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK			0x0ac 0x3d8 0x7b8 0x2 0x0
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD			0x0ac 0x3d8 0x748 0x3 0x1
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC			0x0ac 0x3d8 0x738 0x4 0x0
+#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6	0x0ac 0x3d8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24			0x0ac 0x3d8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3			0x0ac 0x3d8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20			0x0b0 0x3dc 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT20__GPIO5_14				0x0b0 0x3dc 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK			0x0b0 0x3dc 0x79c 0x2 0x1
+#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC			0x0b0 0x3dc 0x740 0x3 0x0
+#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7	0x0b0 0x3dc 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25			0x0b0 0x3dc 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI			0x0b0 0x3dc 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21			0x0b4 0x3e0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT21__GPIO5_15				0x0b4 0x3e0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI			0x0b4 0x3e0 0x7a4 0x2 0x1
+#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD			0x0b4 0x3e0 0x734 0x3 0x0
+#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0		0x0b4 0x3e0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26			0x0b4 0x3e0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO			0x0b4 0x3e0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22			0x0b8 0x3e4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT22__GPIO5_16				0x0b8 0x3e4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO			0x0b8 0x3e4 0x7a0 0x2 0x1
+#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS			0x0b8 0x3e4 0x744 0x3 0x0
+#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1		0x0b8 0x3e4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27			0x0b8 0x3e4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK			0x0b8 0x3e4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23			0x0bc 0x3e8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT23__GPIO5_17				0x0bc 0x3e8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0			0x0bc 0x3e8 0x7a8 0x2 0x1
+#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD			0x0bc 0x3e8 0x730 0x3 0x0
+#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2		0x0bc 0x3e8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28			0x0bc 0x3e8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS			0x0bc 0x3e8 0x000 0x7 0x0
+#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK			0x0c0 0x3ec 0x000 0x0 0x0
+#define MX53_PAD_CSI0_PIXCLK__GPIO5_18				0x0c0 0x3ec 0x000 0x1 0x0
+#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0			0x0c0 0x3ec 0x000 0x5 0x0
+#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29			0x0c0 0x3ec 0x000 0x6 0x0
+#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC			0x0c4 0x3f0 0x000 0x0 0x0
+#define MX53_PAD_CSI0_MCLK__GPIO5_19				0x0c4 0x3f0 0x000 0x1 0x0
+#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK			0x0c4 0x3f0 0x000 0x2 0x0
+#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1			0x0c4 0x3f0 0x000 0x5 0x0
+#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30			0x0c4 0x3f0 0x000 0x6 0x0
+#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL				0x0c4 0x3f0 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN			0x0c8 0x3f4 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DATA_EN__GPIO5_20				0x0c8 0x3f4 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2			0x0c8 0x3f4 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31			0x0c8 0x3f4 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK			0x0c8 0x3f4 0x000 0x7 0x0
+#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC			0x0cc 0x3f8 0x000 0x0 0x0
+#define MX53_PAD_CSI0_VSYNC__GPIO5_21				0x0cc 0x3f8 0x000 0x1 0x0
+#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3			0x0cc 0x3f8 0x000 0x5 0x0
+#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32			0x0cc 0x3f8 0x000 0x6 0x0
+#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0			0x0cc 0x3f8 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4			0x0d0 0x3fc 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT4__GPIO5_22				0x0d0 0x3fc 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT4__KPP_COL_5				0x0d0 0x3fc 0x840 0x2 0x1
+#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK				0x0d0 0x3fc 0x79c 0x3 0x2
+#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP			0x0d0 0x3fc 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC			0x0d0 0x3fc 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33			0x0d0 0x3fc 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1			0x0d0 0x3fc 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5			0x0d4 0x400 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT5__GPIO5_23				0x0d4 0x400 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT5__KPP_ROW_5				0x0d4 0x400 0x84c 0x2 0x0
+#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI				0x0d4 0x400 0x7a4 0x3 0x2
+#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT			0x0d4 0x400 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD			0x0d4 0x400 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34			0x0d4 0x400 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2			0x0d4 0x400 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6			0x0d8 0x404 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT6__GPIO5_24				0x0d8 0x404 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT6__KPP_COL_6				0x0d8 0x404 0x844 0x2 0x0
+#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO				0x0d8 0x404 0x7a0 0x3 0x2
+#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK			0x0d8 0x404 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS			0x0d8 0x404 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35			0x0d8 0x404 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3			0x0d8 0x404 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7			0x0dc 0x408 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT7__GPIO5_25				0x0dc 0x408 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT7__KPP_ROW_6				0x0dc 0x408 0x850 0x2 0x0
+#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0				0x0dc 0x408 0x7a8 0x3 0x2
+#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR			0x0dc 0x408 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD			0x0dc 0x408 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36			0x0dc 0x408 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4			0x0dc 0x408 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8			0x0e0 0x40c 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT8__GPIO5_26				0x0e0 0x40c 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT8__KPP_COL_7				0x0e0 0x40c 0x848 0x2 0x0
+#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK				0x0e0 0x40c 0x7b8 0x3 0x1
+#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC			0x0e0 0x40c 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT8__I2C1_SDA				0x0e0 0x40c 0x818 0x5 0x0
+#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37			0x0e0 0x40c 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5			0x0e0 0x40c 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9			0x0e4 0x410 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT9__GPIO5_27				0x0e4 0x410 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT9__KPP_ROW_7				0x0e4 0x410 0x854 0x2 0x0
+#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI				0x0e4 0x410 0x7c0 0x3 0x1
+#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR			0x0e4 0x410 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT9__I2C1_SCL				0x0e4 0x410 0x814 0x5 0x0
+#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38			0x0e4 0x410 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6			0x0e4 0x410 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10			0x0e8 0x414 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT10__GPIO5_28				0x0e8 0x414 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX			0x0e8 0x414 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO			0x0e8 0x414 0x7bc 0x3 0x1
+#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC			0x0e8 0x414 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4			0x0e8 0x414 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39			0x0e8 0x414 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7			0x0e8 0x414 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11			0x0ec 0x418 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT11__GPIO5_29				0x0ec 0x418 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX			0x0ec 0x418 0x878 0x2 0x1
+#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0				0x0ec 0x418 0x7c4 0x3 0x1
+#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS			0x0ec 0x418 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5			0x0ec 0x418 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40			0x0ec 0x418 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8			0x0ec 0x418 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12			0x0f0 0x41c 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT12__GPIO5_30				0x0f0 0x41c 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX			0x0f0 0x41c 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0		0x0f0 0x41c 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6			0x0f0 0x41c 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41			0x0f0 0x41c 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9			0x0f0 0x41c 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13			0x0f4 0x420 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT13__GPIO5_31				0x0f4 0x420 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX			0x0f4 0x420 0x890 0x2 0x3
+#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1		0x0f4 0x420 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7			0x0f4 0x420 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42			0x0f4 0x420 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10			0x0f4 0x420 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14			0x0f8 0x424 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT14__GPIO6_0				0x0f8 0x424 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX			0x0f8 0x424 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2		0x0f8 0x424 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8			0x0f8 0x424 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43			0x0f8 0x424 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11			0x0f8 0x424 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15			0x0fc 0x428 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT15__GPIO6_1				0x0fc 0x428 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX			0x0fc 0x428 0x898 0x2 0x3
+#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3		0x0fc 0x428 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9			0x0fc 0x428 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44			0x0fc 0x428 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12			0x0fc 0x428 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16			0x100 0x42c 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT16__GPIO6_2				0x100 0x42c 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT16__UART4_RTS				0x100 0x42c 0x88c 0x2 0x0
+#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4		0x100 0x42c 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10			0x100 0x42c 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45			0x100 0x42c 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13			0x100 0x42c 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17			0x104 0x430 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT17__GPIO6_3				0x104 0x430 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT17__UART4_CTS				0x104 0x430 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5		0x104 0x430 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11			0x104 0x430 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46			0x104 0x430 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14			0x104 0x430 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18			0x108 0x434 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT18__GPIO6_4				0x108 0x434 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT18__UART5_RTS				0x108 0x434 0x894 0x2 0x2
+#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6		0x108 0x434 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12			0x108 0x434 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47			0x108 0x434 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15			0x108 0x434 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19			0x10c 0x438 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT19__GPIO6_5				0x10c 0x438 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT19__UART5_CTS				0x10c 0x438 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7		0x10c 0x438 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13			0x10c 0x438 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48			0x10c 0x438 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK			0x10c 0x438 0x000 0x7 0x0
+#define MX53_PAD_EIM_A25__EMI_WEIM_A_25				0x110 0x458 0x000 0x0 0x0
+#define MX53_PAD_EIM_A25__GPIO5_2				0x110 0x458 0x000 0x1 0x0
+#define MX53_PAD_EIM_A25__ECSPI2_RDY				0x110 0x458 0x000 0x2 0x0
+#define MX53_PAD_EIM_A25__IPU_DI1_PIN12				0x110 0x458 0x000 0x3 0x0
+#define MX53_PAD_EIM_A25__CSPI_SS1				0x110 0x458 0x790 0x4 0x1
+#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS				0x110 0x458 0x000 0x6 0x0
+#define MX53_PAD_EIM_A25__USBPHY1_BISTOK			0x110 0x458 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2				0x114 0x45c 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB2__GPIO2_30				0x114 0x45c 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK			0x114 0x45c 0x76c 0x2 0x0
+#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS			0x114 0x45c 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB2__ECSPI1_SS0				0x114 0x45c 0x7a8 0x4 0x3
+#define MX53_PAD_EIM_EB2__I2C2_SCL				0x114 0x45c 0x81c 0x5 0x1
+#define MX53_PAD_EIM_D16__EMI_WEIM_D_16				0x118 0x460 0x000 0x0 0x0
+#define MX53_PAD_EIM_D16__GPIO3_16				0x118 0x460 0x000 0x1 0x0
+#define MX53_PAD_EIM_D16__IPU_DI0_PIN5				0x118 0x460 0x000 0x2 0x0
+#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK			0x118 0x460 0x000 0x3 0x0
+#define MX53_PAD_EIM_D16__ECSPI1_SCLK				0x118 0x460 0x79c 0x4 0x3
+#define MX53_PAD_EIM_D16__I2C2_SDA				0x118 0x460 0x820 0x5 0x1
+#define MX53_PAD_EIM_D17__EMI_WEIM_D_17				0x11c 0x464 0x000 0x0 0x0
+#define MX53_PAD_EIM_D17__GPIO3_17				0x11c 0x464 0x000 0x1 0x0
+#define MX53_PAD_EIM_D17__IPU_DI0_PIN6				0x11c 0x464 0x000 0x2 0x0
+#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN			0x11c 0x464 0x830 0x3 0x0
+#define MX53_PAD_EIM_D17__ECSPI1_MISO				0x11c 0x464 0x7a0 0x4 0x3
+#define MX53_PAD_EIM_D17__I2C3_SCL				0x11c 0x464 0x824 0x5 0x0
+#define MX53_PAD_EIM_D18__EMI_WEIM_D_18				0x120 0x468 0x000 0x0 0x0
+#define MX53_PAD_EIM_D18__GPIO3_18				0x120 0x468 0x000 0x1 0x0
+#define MX53_PAD_EIM_D18__IPU_DI0_PIN7				0x120 0x468 0x000 0x2 0x0
+#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO			0x120 0x468 0x830 0x3 0x1
+#define MX53_PAD_EIM_D18__ECSPI1_MOSI				0x120 0x468 0x7a4 0x4 0x3
+#define MX53_PAD_EIM_D18__I2C3_SDA				0x120 0x468 0x828 0x5 0x0
+#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS				0x120 0x468 0x000 0x6 0x0
+#define MX53_PAD_EIM_D19__EMI_WEIM_D_19				0x124 0x46c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D19__GPIO3_19				0x124 0x46c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D19__IPU_DI0_PIN8				0x124 0x46c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS			0x124 0x46c 0x000 0x3 0x0
+#define MX53_PAD_EIM_D19__ECSPI1_SS1				0x124 0x46c 0x7ac 0x4 0x2
+#define MX53_PAD_EIM_D19__EPIT1_EPITO				0x124 0x46c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D19__UART1_CTS				0x124 0x46c 0x000 0x6 0x0
+#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC			0x124 0x46c 0x8a4 0x7 0x0
+#define MX53_PAD_EIM_D20__EMI_WEIM_D_20				0x128 0x470 0x000 0x0 0x0
+#define MX53_PAD_EIM_D20__GPIO3_20				0x128 0x470 0x000 0x1 0x0
+#define MX53_PAD_EIM_D20__IPU_DI0_PIN16				0x128 0x470 0x000 0x2 0x0
+#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS			0x128 0x470 0x000 0x3 0x0
+#define MX53_PAD_EIM_D20__CSPI_SS0				0x128 0x470 0x78c 0x4 0x1
+#define MX53_PAD_EIM_D20__EPIT2_EPITO				0x128 0x470 0x000 0x5 0x0
+#define MX53_PAD_EIM_D20__UART1_RTS				0x128 0x470 0x874 0x6 0x1
+#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR			0x128 0x470 0x000 0x7 0x0
+#define MX53_PAD_EIM_D21__EMI_WEIM_D_21				0x12c 0x474 0x000 0x0 0x0
+#define MX53_PAD_EIM_D21__GPIO3_21				0x12c 0x474 0x000 0x1 0x0
+#define MX53_PAD_EIM_D21__IPU_DI0_PIN17				0x12c 0x474 0x000 0x2 0x0
+#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK			0x12c 0x474 0x000 0x3 0x0
+#define MX53_PAD_EIM_D21__CSPI_SCLK				0x12c 0x474 0x780 0x4 0x1
+#define MX53_PAD_EIM_D21__I2C1_SCL				0x12c 0x474 0x814 0x5 0x1
+#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC			0x12c 0x474 0x89c 0x6 0x1
+#define MX53_PAD_EIM_D22__EMI_WEIM_D_22				0x130 0x478 0x000 0x0 0x0
+#define MX53_PAD_EIM_D22__GPIO3_22				0x130 0x478 0x000 0x1 0x0
+#define MX53_PAD_EIM_D22__IPU_DI0_PIN1				0x130 0x478 0x000 0x2 0x0
+#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN			0x130 0x478 0x82c 0x3 0x0
+#define MX53_PAD_EIM_D22__CSPI_MISO				0x130 0x478 0x784 0x4 0x1
+#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR			0x130 0x478 0x000 0x6 0x0
+#define MX53_PAD_EIM_D23__EMI_WEIM_D_23				0x134 0x47c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D23__GPIO3_23				0x134 0x47c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D23__UART3_CTS				0x134 0x47c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D23__UART1_DCD				0x134 0x47c 0x000 0x3 0x0
+#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS				0x134 0x47c 0x000 0x4 0x0
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN2				0x134 0x47c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN			0x134 0x47c 0x834 0x6 0x0
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN14				0x134 0x47c 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3				0x138 0x480 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB3__GPIO2_31				0x138 0x480 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB3__UART3_RTS				0x138 0x480 0x884 0x2 0x1
+#define MX53_PAD_EIM_EB3__UART1_RI				0x138 0x480 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3				0x138 0x480 0x000 0x5 0x0
+#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC			0x138 0x480 0x838 0x6 0x0
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16				0x138 0x480 0x000 0x7 0x0
+#define MX53_PAD_EIM_D24__EMI_WEIM_D_24				0x13c 0x484 0x000 0x0 0x0
+#define MX53_PAD_EIM_D24__GPIO3_24				0x13c 0x484 0x000 0x1 0x0
+#define MX53_PAD_EIM_D24__UART3_TXD_MUX				0x13c 0x484 0x000 0x2 0x0
+#define MX53_PAD_EIM_D24__ECSPI1_SS2				0x13c 0x484 0x7b0 0x3 0x1
+#define MX53_PAD_EIM_D24__CSPI_SS2				0x13c 0x484 0x794 0x4 0x1
+#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS			0x13c 0x484 0x754 0x5 0x1
+#define MX53_PAD_EIM_D24__ECSPI2_SS2				0x13c 0x484 0x000 0x6 0x0
+#define MX53_PAD_EIM_D24__UART1_DTR				0x13c 0x484 0x000 0x7 0x0
+#define MX53_PAD_EIM_D25__EMI_WEIM_D_25				0x140 0x488 0x000 0x0 0x0
+#define MX53_PAD_EIM_D25__GPIO3_25				0x140 0x488 0x000 0x1 0x0
+#define MX53_PAD_EIM_D25__UART3_RXD_MUX				0x140 0x488 0x888 0x2 0x1
+#define MX53_PAD_EIM_D25__ECSPI1_SS3				0x140 0x488 0x7b4 0x3 0x1
+#define MX53_PAD_EIM_D25__CSPI_SS3				0x140 0x488 0x798 0x4 0x1
+#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC			0x140 0x488 0x750 0x5 0x1
+#define MX53_PAD_EIM_D25__ECSPI2_SS3				0x140 0x488 0x000 0x6 0x0
+#define MX53_PAD_EIM_D25__UART1_DSR				0x140 0x488 0x000 0x7 0x0
+#define MX53_PAD_EIM_D26__EMI_WEIM_D_26				0x144 0x48c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D26__GPIO3_26				0x144 0x48c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D26__UART2_RXD_MUX				0x144 0x48c 0x880 0x2 0x0
+#define MX53_PAD_EIM_D26__UART2_TXD_MUX				0x144 0x48c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D26__FIRI_RXD				0x144 0x48c 0x80c 0x3 0x0
+#define MX53_PAD_EIM_D26__IPU_CSI0_D_1				0x144 0x48c 0x000 0x4 0x0
+#define MX53_PAD_EIM_D26__IPU_DI1_PIN11				0x144 0x48c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D26__IPU_SISG_2				0x144 0x48c 0x000 0x6 0x0
+#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22			0x144 0x48c 0x000 0x7 0x0
+#define MX53_PAD_EIM_D27__EMI_WEIM_D_27				0x148 0x490 0x000 0x0 0x0
+#define MX53_PAD_EIM_D27__GPIO3_27				0x148 0x490 0x000 0x1 0x0
+#define MX53_PAD_EIM_D27__UART2_RXD_MUX				0x148 0x490 0x880 0x2 0x1
+#define MX53_PAD_EIM_D27__UART2_TXD_MUX				0x148 0x490 0x000 0x2 0x0
+#define MX53_PAD_EIM_D27__FIRI_TXD				0x148 0x490 0x000 0x3 0x0
+#define MX53_PAD_EIM_D27__IPU_CSI0_D_0				0x148 0x490 0x000 0x4 0x0
+#define MX53_PAD_EIM_D27__IPU_DI1_PIN13				0x148 0x490 0x000 0x5 0x0
+#define MX53_PAD_EIM_D27__IPU_SISG_3				0x148 0x490 0x000 0x6 0x0
+#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23			0x148 0x490 0x000 0x7 0x0
+#define MX53_PAD_EIM_D28__EMI_WEIM_D_28				0x14c 0x494 0x000 0x0 0x0
+#define MX53_PAD_EIM_D28__GPIO3_28				0x14c 0x494 0x000 0x1 0x0
+#define MX53_PAD_EIM_D28__UART2_CTS				0x14c 0x494 0x000 0x2 0x0
+#define MX53_PAD_EIM_D28__UART2_RTS				0x14c 0x494 0x87c 0x2 0x0
+#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO			0x14c 0x494 0x82c 0x3 0x1
+#define MX53_PAD_EIM_D28__CSPI_MOSI				0x14c 0x494 0x788 0x4 0x1
+#define MX53_PAD_EIM_D28__I2C1_SDA				0x14c 0x494 0x818 0x5 0x1
+#define MX53_PAD_EIM_D28__IPU_EXT_TRIG				0x14c 0x494 0x000 0x6 0x0
+#define MX53_PAD_EIM_D28__IPU_DI0_PIN13				0x14c 0x494 0x000 0x7 0x0
+#define MX53_PAD_EIM_D29__EMI_WEIM_D_29				0x150 0x498 0x000 0x0 0x0
+#define MX53_PAD_EIM_D29__GPIO3_29				0x150 0x498 0x000 0x1 0x0
+#define MX53_PAD_EIM_D29__UART2_CTS				0x150 0x498 0x000 0x2 0x0
+#define MX53_PAD_EIM_D29__UART2_RTS				0x150 0x498 0x87c 0x2 0x1
+#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS			0x150 0x498 0x000 0x3 0x0
+#define MX53_PAD_EIM_D29__CSPI_SS0				0x150 0x498 0x78c 0x4 0x2
+#define MX53_PAD_EIM_D29__IPU_DI1_PIN15				0x150 0x498 0x000 0x5 0x0
+#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC			0x150 0x498 0x83c 0x6 0x0
+#define MX53_PAD_EIM_D29__IPU_DI0_PIN14				0x150 0x498 0x000 0x7 0x0
+#define MX53_PAD_EIM_D30__EMI_WEIM_D_30				0x154 0x49c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D30__GPIO3_30				0x154 0x49c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D30__UART3_CTS				0x154 0x49c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D30__IPU_CSI0_D_3				0x154 0x49c 0x000 0x3 0x0
+#define MX53_PAD_EIM_D30__IPU_DI0_PIN11				0x154 0x49c 0x000 0x4 0x0
+#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21			0x154 0x49c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC			0x154 0x49c 0x8a0 0x6 0x0
+#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC			0x154 0x49c 0x8a4 0x7 0x1
+#define MX53_PAD_EIM_D31__EMI_WEIM_D_31				0x158 0x4a0 0x000 0x0 0x0
+#define MX53_PAD_EIM_D31__GPIO3_31				0x158 0x4a0 0x000 0x1 0x0
+#define MX53_PAD_EIM_D31__UART3_RTS				0x158 0x4a0 0x884 0x2 0x3
+#define MX53_PAD_EIM_D31__IPU_CSI0_D_2				0x158 0x4a0 0x000 0x3 0x0
+#define MX53_PAD_EIM_D31__IPU_DI0_PIN12				0x158 0x4a0 0x000 0x4 0x0
+#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20			0x158 0x4a0 0x000 0x5 0x0
+#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR			0x158 0x4a0 0x000 0x6 0x0
+#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR			0x158 0x4a0 0x000 0x7 0x0
+#define MX53_PAD_EIM_A24__EMI_WEIM_A_24				0x15c 0x4a8 0x000 0x0 0x0
+#define MX53_PAD_EIM_A24__GPIO5_4				0x15c 0x4a8 0x000 0x1 0x0
+#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19			0x15c 0x4a8 0x000 0x2 0x0
+#define MX53_PAD_EIM_A24__IPU_CSI1_D_19				0x15c 0x4a8 0x000 0x3 0x0
+#define MX53_PAD_EIM_A24__IPU_SISG_2				0x15c 0x4a8 0x000 0x6 0x0
+#define MX53_PAD_EIM_A24__USBPHY2_BVALID			0x15c 0x4a8 0x000 0x7 0x0
+#define MX53_PAD_EIM_A23__EMI_WEIM_A_23				0x160 0x4ac 0x000 0x0 0x0
+#define MX53_PAD_EIM_A23__GPIO6_6				0x160 0x4ac 0x000 0x1 0x0
+#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18			0x160 0x4ac 0x000 0x2 0x0
+#define MX53_PAD_EIM_A23__IPU_CSI1_D_18				0x160 0x4ac 0x000 0x3 0x0
+#define MX53_PAD_EIM_A23__IPU_SISG_3				0x160 0x4ac 0x000 0x6 0x0
+#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION			0x160 0x4ac 0x000 0x7 0x0
+#define MX53_PAD_EIM_A22__EMI_WEIM_A_22				0x164 0x4b0 0x000 0x0 0x0
+#define MX53_PAD_EIM_A22__GPIO2_16				0x164 0x4b0 0x000 0x1 0x0
+#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17			0x164 0x4b0 0x000 0x2 0x0
+#define MX53_PAD_EIM_A22__IPU_CSI1_D_17				0x164 0x4b0 0x000 0x3 0x0
+#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7				0x164 0x4b0 0x000 0x7 0x0
+#define MX53_PAD_EIM_A21__EMI_WEIM_A_21				0x168 0x4b4 0x000 0x0 0x0
+#define MX53_PAD_EIM_A21__GPIO2_17				0x168 0x4b4 0x000 0x1 0x0
+#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16			0x168 0x4b4 0x000 0x2 0x0
+#define MX53_PAD_EIM_A21__IPU_CSI1_D_16				0x168 0x4b4 0x000 0x3 0x0
+#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6				0x168 0x4b4 0x000 0x7 0x0
+#define MX53_PAD_EIM_A20__EMI_WEIM_A_20				0x16c 0x4b8 0x000 0x0 0x0
+#define MX53_PAD_EIM_A20__GPIO2_18				0x16c 0x4b8 0x000 0x1 0x0
+#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15			0x16c 0x4b8 0x000 0x2 0x0
+#define MX53_PAD_EIM_A20__IPU_CSI1_D_15				0x16c 0x4b8 0x000 0x3 0x0
+#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5				0x16c 0x4b8 0x000 0x7 0x0
+#define MX53_PAD_EIM_A19__EMI_WEIM_A_19				0x170 0x4bc 0x000 0x0 0x0
+#define MX53_PAD_EIM_A19__GPIO2_19				0x170 0x4bc 0x000 0x1 0x0
+#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14			0x170 0x4bc 0x000 0x2 0x0
+#define MX53_PAD_EIM_A19__IPU_CSI1_D_14				0x170 0x4bc 0x000 0x3 0x0
+#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4				0x170 0x4bc 0x000 0x7 0x0
+#define MX53_PAD_EIM_A18__EMI_WEIM_A_18				0x174 0x4c0 0x000 0x0 0x0
+#define MX53_PAD_EIM_A18__GPIO2_20				0x174 0x4c0 0x000 0x1 0x0
+#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13			0x174 0x4c0 0x000 0x2 0x0
+#define MX53_PAD_EIM_A18__IPU_CSI1_D_13				0x174 0x4c0 0x000 0x3 0x0
+#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3				0x174 0x4c0 0x000 0x7 0x0
+#define MX53_PAD_EIM_A17__EMI_WEIM_A_17				0x178 0x4c4 0x000 0x0 0x0
+#define MX53_PAD_EIM_A17__GPIO2_21				0x178 0x4c4 0x000 0x1 0x0
+#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12			0x178 0x4c4 0x000 0x2 0x0
+#define MX53_PAD_EIM_A17__IPU_CSI1_D_12				0x178 0x4c4 0x000 0x3 0x0
+#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2				0x178 0x4c4 0x000 0x7 0x0
+#define MX53_PAD_EIM_A16__EMI_WEIM_A_16				0x17c 0x4c8 0x000 0x0 0x0
+#define MX53_PAD_EIM_A16__GPIO2_22				0x17c 0x4c8 0x000 0x1 0x0
+#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK			0x17c 0x4c8 0x000 0x2 0x0
+#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK			0x17c 0x4c8 0x000 0x3 0x0
+#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1				0x17c 0x4c8 0x000 0x7 0x0
+#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0				0x180 0x4cc 0x000 0x0 0x0
+#define MX53_PAD_EIM_CS0__GPIO2_23				0x180 0x4cc 0x000 0x1 0x0
+#define MX53_PAD_EIM_CS0__ECSPI2_SCLK				0x180 0x4cc 0x7b8 0x2 0x2
+#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5				0x180 0x4cc 0x000 0x3 0x0
+#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1				0x184 0x4d0 0x000 0x0 0x0
+#define MX53_PAD_EIM_CS1__GPIO2_24				0x184 0x4d0 0x000 0x1 0x0
+#define MX53_PAD_EIM_CS1__ECSPI2_MOSI				0x184 0x4d0 0x7c0 0x2 0x2
+#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6				0x184 0x4d0 0x000 0x3 0x0
+#define MX53_PAD_EIM_OE__EMI_WEIM_OE				0x188 0x4d4 0x000 0x0 0x0
+#define MX53_PAD_EIM_OE__GPIO2_25				0x188 0x4d4 0x000 0x1 0x0
+#define MX53_PAD_EIM_OE__ECSPI2_MISO				0x188 0x4d4 0x7bc 0x2 0x2
+#define MX53_PAD_EIM_OE__IPU_DI1_PIN7				0x188 0x4d4 0x000 0x3 0x0
+#define MX53_PAD_EIM_OE__USBPHY2_IDDIG				0x188 0x4d4 0x000 0x7 0x0
+#define MX53_PAD_EIM_RW__EMI_WEIM_RW				0x18c 0x4d8 0x000 0x0 0x0
+#define MX53_PAD_EIM_RW__GPIO2_26				0x18c 0x4d8 0x000 0x1 0x0
+#define MX53_PAD_EIM_RW__ECSPI2_SS0				0x18c 0x4d8 0x7c4 0x2 0x2
+#define MX53_PAD_EIM_RW__IPU_DI1_PIN8				0x18c 0x4d8 0x000 0x3 0x0
+#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT			0x18c 0x4d8 0x000 0x7 0x0
+#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA				0x190 0x4dc 0x000 0x0 0x0
+#define MX53_PAD_EIM_LBA__GPIO2_27				0x190 0x4dc 0x000 0x1 0x0
+#define MX53_PAD_EIM_LBA__ECSPI2_SS1				0x190 0x4dc 0x7c8 0x2 0x1
+#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17				0x190 0x4dc 0x000 0x3 0x0
+#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0				0x190 0x4dc 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0				0x194 0x4e4 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB0__GPIO2_28				0x194 0x4e4 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11			0x194 0x4e4 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11				0x194 0x4e4 0x000 0x4 0x0
+#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY				0x194 0x4e4 0x810 0x5 0x0
+#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7				0x194 0x4e4 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1				0x198 0x4e8 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB1__GPIO2_29				0x198 0x4e8 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10			0x198 0x4e8 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10				0x198 0x4e8 0x000 0x4 0x0
+#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6				0x198 0x4e8 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0			0x19c 0x4ec 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA0__GPIO3_0				0x19c 0x4ec 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9			0x19c 0x4ec 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9				0x19c 0x4ec 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5				0x19c 0x4ec 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1			0x1a0 0x4f0 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA1__GPIO3_1				0x1a0 0x4f0 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8			0x1a0 0x4f0 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8				0x1a0 0x4f0 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4				0x1a0 0x4f0 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2			0x1a4 0x4f4 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA2__GPIO3_2				0x1a4 0x4f4 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7			0x1a4 0x4f4 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7				0x1a4 0x4f4 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3				0x1a4 0x4f4 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3			0x1a8 0x4f8 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA3__GPIO3_3				0x1a8 0x4f8 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6			0x1a8 0x4f8 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6				0x1a8 0x4f8 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2				0x1a8 0x4f8 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4			0x1ac 0x4fc 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA4__GPIO3_4				0x1ac 0x4fc 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5			0x1ac 0x4fc 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5				0x1ac 0x4fc 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7				0x1ac 0x4fc 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5			0x1b0 0x500 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA5__GPIO3_5				0x1b0 0x500 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4			0x1b0 0x500 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4				0x1b0 0x500 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6				0x1b0 0x500 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6			0x1b4 0x504 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA6__GPIO3_6				0x1b4 0x504 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3			0x1b4 0x504 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3				0x1b4 0x504 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5				0x1b4 0x504 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7			0x1b8 0x508 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA7__GPIO3_7				0x1b8 0x508 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2			0x1b8 0x508 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2				0x1b8 0x508 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4				0x1b8 0x508 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8			0x1bc 0x50c 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA8__GPIO3_8				0x1bc 0x50c 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1			0x1bc 0x50c 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1				0x1bc 0x50c 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3				0x1bc 0x50c 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9			0x1c0 0x510 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA9__GPIO3_9				0x1c0 0x510 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0			0x1c0 0x510 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0				0x1c0 0x510 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2				0x1c0 0x510 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10			0x1c4 0x514 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA10__GPIO3_10				0x1c4 0x514 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15			0x1c4 0x514 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN			0x1c4 0x514 0x834 0x4 0x1
+#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1			0x1c4 0x514 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11			0x1c8 0x518 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA11__GPIO3_11				0x1c8 0x518 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2				0x1c8 0x518 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC			0x1c8 0x518 0x838 0x4 0x1
+#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12			0x1cc 0x51c 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA12__GPIO3_12				0x1cc 0x51c 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3				0x1cc 0x51c 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC			0x1cc 0x51c 0x83c 0x4 0x1
+#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13			0x1d0 0x520 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA13__GPIO3_13				0x1d0 0x520 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS			0x1d0 0x520 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK			0x1d0 0x520 0x76c 0x4 0x1
+#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14			0x1d4 0x524 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA14__GPIO3_14				0x1d4 0x524 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS			0x1d4 0x524 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK			0x1d4 0x524 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15			0x1d8 0x528 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA15__GPIO3_15				0x1d8 0x528 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1				0x1d8 0x528 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4				0x1d8 0x528 0x000 0x4 0x0
+#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B			0x1dc 0x52c 0x000 0x0 0x0
+#define MX53_PAD_NANDF_WE_B__GPIO6_12				0x1dc 0x52c 0x000 0x1 0x0
+#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B			0x1e0 0x530 0x000 0x0 0x0
+#define MX53_PAD_NANDF_RE_B__GPIO6_13				0x1e0 0x530 0x000 0x1 0x0
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT			0x1e4 0x534 0x000 0x0 0x0
+#define MX53_PAD_EIM_WAIT__GPIO5_0				0x1e4 0x534 0x000 0x1 0x0
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B			0x1e4 0x534 0x000 0x2 0x0
+#define MX53_PAD_LVDS1_TX3_P__GPIO6_22				0x1ec 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3			0x1ec 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_TX2_P__GPIO6_24				0x1f0 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2			0x1f0 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_CLK_P__GPIO6_26				0x1f4 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK			0x1f4 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_TX1_P__GPIO6_28				0x1f8 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1			0x1f8 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_TX0_P__GPIO6_30				0x1fc 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0			0x1fc 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX3_P__GPIO7_22				0x200 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3			0x200 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_CLK_P__GPIO7_24				0x204 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK			0x204 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX2_P__GPIO7_26				0x208 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2			0x208 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX1_P__GPIO7_28				0x20c 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1			0x20c 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX0_P__GPIO7_30				0x210 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0			0x210 0x000 0x000 0x1 0x0
+#define MX53_PAD_GPIO_10__GPIO4_0				0x214 0x540 0x000 0x0 0x0
+#define MX53_PAD_GPIO_10__OSC32k_32K_OUT			0x214 0x540 0x000 0x1 0x0
+#define MX53_PAD_GPIO_11__GPIO4_1				0x218 0x544 0x000 0x0 0x0
+#define MX53_PAD_GPIO_12__GPIO4_2				0x21c 0x548 0x000 0x0 0x0
+#define MX53_PAD_GPIO_13__GPIO4_3				0x220 0x54c 0x000 0x0 0x0
+#define MX53_PAD_GPIO_14__GPIO4_4				0x224 0x550 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE			0x228 0x5a0 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CLE__GPIO6_7				0x228 0x5a0 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0			0x228 0x5a0 0x000 0x7 0x0
+#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE			0x22c 0x5a4 0x000 0x0 0x0
+#define MX53_PAD_NANDF_ALE__GPIO6_8				0x22c 0x5a4 0x000 0x1 0x0
+#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1			0x22c 0x5a4 0x000 0x7 0x0
+#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B			0x230 0x5a8 0x000 0x0 0x0
+#define MX53_PAD_NANDF_WP_B__GPIO6_9				0x230 0x5a8 0x000 0x1 0x0
+#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2			0x230 0x5a8 0x000 0x7 0x0
+#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0			0x234 0x5ac 0x000 0x0 0x0
+#define MX53_PAD_NANDF_RB0__GPIO6_10				0x234 0x5ac 0x000 0x1 0x0
+#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3			0x234 0x5ac 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0			0x238 0x5b0 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS0__GPIO6_11				0x238 0x5b0 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4			0x238 0x5b0 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1			0x23c 0x5b4 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS1__GPIO6_14				0x23c 0x5b4 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS1__MLB_MLBCLK				0x23c 0x5b4 0x858 0x6 0x0
+#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5			0x23c 0x5b4 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2			0x240 0x5b8 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS2__GPIO6_15				0x240 0x5b8 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS2__IPU_SISG_0				0x240 0x5b8 0x000 0x2 0x0
+#define MX53_PAD_NANDF_CS2__ESAI1_TX0				0x240 0x5b8 0x7e4 0x3 0x0
+#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE			0x240 0x5b8 0x000 0x4 0x0
+#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK			0x240 0x5b8 0x000 0x5 0x0
+#define MX53_PAD_NANDF_CS2__MLB_MLBSIG				0x240 0x5b8 0x860 0x6 0x0
+#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6			0x240 0x5b8 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3			0x244 0x5bc 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS3__GPIO6_16				0x244 0x5bc 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS3__IPU_SISG_1				0x244 0x5bc 0x000 0x2 0x0
+#define MX53_PAD_NANDF_CS3__ESAI1_TX1				0x244 0x5bc 0x7e8 0x3 0x0
+#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26			0x244 0x5bc 0x000 0x4 0x0
+#define MX53_PAD_NANDF_CS3__MLB_MLBDAT				0x244 0x5bc 0x85c 0x6 0x0
+#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7			0x244 0x5bc 0x000 0x7 0x0
+#define MX53_PAD_FEC_MDIO__FEC_MDIO				0x248 0x5c4 0x804 0x0 0x1
+#define MX53_PAD_FEC_MDIO__GPIO1_22				0x248 0x5c4 0x000 0x1 0x0
+#define MX53_PAD_FEC_MDIO__ESAI1_SCKR				0x248 0x5c4 0x7dc 0x2 0x0
+#define MX53_PAD_FEC_MDIO__FEC_COL				0x248 0x5c4 0x800 0x3 0x1
+#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2			0x248 0x5c4 0x000 0x4 0x0
+#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3		0x248 0x5c4 0x000 0x5 0x0
+#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49			0x248 0x5c4 0x000 0x6 0x0
+#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK			0x24c 0x5c8 0x000 0x0 0x0
+#define MX53_PAD_FEC_REF_CLK__GPIO1_23				0x24c 0x5c8 0x000 0x1 0x0
+#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR				0x24c 0x5c8 0x7cc 0x2 0x0
+#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4		0x24c 0x5c8 0x000 0x5 0x0
+#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50			0x24c 0x5c8 0x000 0x6 0x0
+#define MX53_PAD_FEC_RX_ER__FEC_RX_ER				0x250 0x5cc 0x000 0x0 0x0
+#define MX53_PAD_FEC_RX_ER__GPIO1_24				0x250 0x5cc 0x000 0x1 0x0
+#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR				0x250 0x5cc 0x7d4 0x2 0x0
+#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK				0x250 0x5cc 0x808 0x3 0x1
+#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3			0x250 0x5cc 0x000 0x4 0x0
+#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV				0x254 0x5d0 0x000 0x0 0x0
+#define MX53_PAD_FEC_CRS_DV__GPIO1_25				0x254 0x5d0 0x000 0x1 0x0
+#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT				0x254 0x5d0 0x7e0 0x2 0x0
+#define MX53_PAD_FEC_RXD1__FEC_RDATA_1				0x258 0x5d4 0x000 0x0 0x0
+#define MX53_PAD_FEC_RXD1__GPIO1_26				0x258 0x5d4 0x000 0x1 0x0
+#define MX53_PAD_FEC_RXD1__ESAI1_FST				0x258 0x5d4 0x7d0 0x2 0x0
+#define MX53_PAD_FEC_RXD1__MLB_MLBSIG				0x258 0x5d4 0x860 0x3 0x1
+#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1			0x258 0x5d4 0x000 0x4 0x0
+#define MX53_PAD_FEC_RXD0__FEC_RDATA_0				0x25c 0x5d8 0x000 0x0 0x0
+#define MX53_PAD_FEC_RXD0__GPIO1_27				0x25c 0x5d8 0x000 0x1 0x0
+#define MX53_PAD_FEC_RXD0__ESAI1_HCKT				0x25c 0x5d8 0x7d8 0x2 0x0
+#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT			0x25c 0x5d8 0x000 0x3 0x0
+#define MX53_PAD_FEC_TX_EN__FEC_TX_EN				0x260 0x5dc 0x000 0x0 0x0
+#define MX53_PAD_FEC_TX_EN__GPIO1_28				0x260 0x5dc 0x000 0x1 0x0
+#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2			0x260 0x5dc 0x7f0 0x2 0x0
+#define MX53_PAD_FEC_TXD1__FEC_TDATA_1				0x264 0x5e0 0x000 0x0 0x0
+#define MX53_PAD_FEC_TXD1__GPIO1_29				0x264 0x5e0 0x000 0x1 0x0
+#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3			0x264 0x5e0 0x7ec 0x2 0x0
+#define MX53_PAD_FEC_TXD1__MLB_MLBCLK				0x264 0x5e0 0x858 0x3 0x1
+#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK			0x264 0x5e0 0x000 0x4 0x0
+#define MX53_PAD_FEC_TXD0__FEC_TDATA_0				0x268 0x5e4 0x000 0x0 0x0
+#define MX53_PAD_FEC_TXD0__GPIO1_30				0x268 0x5e4 0x000 0x1 0x0
+#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1			0x268 0x5e4 0x7f4 0x2 0x0
+#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0			0x268 0x5e4 0x000 0x7 0x0
+#define MX53_PAD_FEC_MDC__FEC_MDC				0x26c 0x5e8 0x000 0x0 0x0
+#define MX53_PAD_FEC_MDC__GPIO1_31				0x26c 0x5e8 0x000 0x1 0x0
+#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0				0x26c 0x5e8 0x7f8 0x2 0x0
+#define MX53_PAD_FEC_MDC__MLB_MLBDAT				0x26c 0x5e8 0x85c 0x3 0x1
+#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG		0x26c 0x5e8 0x000 0x4 0x0
+#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1			0x26c 0x5e8 0x000 0x7 0x0
+#define MX53_PAD_PATA_DIOW__PATA_DIOW				0x270 0x5f0 0x000 0x0 0x0
+#define MX53_PAD_PATA_DIOW__GPIO6_17				0x270 0x5f0 0x000 0x1 0x0
+#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX			0x270 0x5f0 0x000 0x3 0x0
+#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2			0x270 0x5f0 0x000 0x7 0x0
+#define MX53_PAD_PATA_DMACK__PATA_DMACK				0x274 0x5f4 0x000 0x0 0x0
+#define MX53_PAD_PATA_DMACK__GPIO6_18				0x274 0x5f4 0x000 0x1 0x0
+#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX			0x274 0x5f4 0x878 0x3 0x3
+#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3			0x274 0x5f4 0x000 0x7 0x0
+#define MX53_PAD_PATA_DMARQ__PATA_DMARQ				0x278 0x5f8 0x000 0x0 0x0
+#define MX53_PAD_PATA_DMARQ__GPIO7_0				0x278 0x5f8 0x000 0x1 0x0
+#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX			0x278 0x5f8 0x000 0x3 0x0
+#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0			0x278 0x5f8 0x000 0x5 0x0
+#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4			0x278 0x5f8 0x000 0x7 0x0
+#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN			0x27c 0x5fc 0x000 0x0 0x0
+#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1			0x27c 0x5fc 0x000 0x1 0x0
+#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX			0x27c 0x5fc 0x880 0x3 0x3
+#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1			0x27c 0x5fc 0x000 0x5 0x0
+#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5		0x27c 0x5fc 0x000 0x7 0x0
+#define MX53_PAD_PATA_INTRQ__PATA_INTRQ				0x280 0x600 0x000 0x0 0x0
+#define MX53_PAD_PATA_INTRQ__GPIO7_2				0x280 0x600 0x000 0x1 0x0
+#define MX53_PAD_PATA_INTRQ__UART2_CTS				0x280 0x600 0x000 0x3 0x0
+#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN				0x280 0x600 0x000 0x4 0x0
+#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2			0x280 0x600 0x000 0x5 0x0
+#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6			0x280 0x600 0x000 0x7 0x0
+#define MX53_PAD_PATA_DIOR__PATA_DIOR				0x284 0x604 0x000 0x0 0x0
+#define MX53_PAD_PATA_DIOR__GPIO7_3				0x284 0x604 0x000 0x1 0x0
+#define MX53_PAD_PATA_DIOR__UART2_RTS				0x284 0x604 0x87c 0x3 0x3
+#define MX53_PAD_PATA_DIOR__CAN1_RXCAN				0x284 0x604 0x760 0x4 0x1
+#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7			0x284 0x604 0x000 0x7 0x0
+#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B		0x288 0x608 0x000 0x0 0x0
+#define MX53_PAD_PATA_RESET_B__GPIO7_4				0x288 0x608 0x000 0x1 0x0
+#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD			0x288 0x608 0x000 0x2 0x0
+#define MX53_PAD_PATA_RESET_B__UART1_CTS			0x288 0x608 0x000 0x3 0x0
+#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN			0x288 0x608 0x000 0x4 0x0
+#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0		0x288 0x608 0x000 0x7 0x0
+#define MX53_PAD_PATA_IORDY__PATA_IORDY				0x28c 0x60c 0x000 0x0 0x0
+#define MX53_PAD_PATA_IORDY__GPIO7_5				0x28c 0x60c 0x000 0x1 0x0
+#define MX53_PAD_PATA_IORDY__ESDHC3_CLK				0x28c 0x60c 0x000 0x2 0x0
+#define MX53_PAD_PATA_IORDY__UART1_RTS				0x28c 0x60c 0x874 0x3 0x3
+#define MX53_PAD_PATA_IORDY__CAN2_RXCAN				0x28c 0x60c 0x764 0x4 0x1
+#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1			0x28c 0x60c 0x000 0x7 0x0
+#define MX53_PAD_PATA_DA_0__PATA_DA_0				0x290 0x610 0x000 0x0 0x0
+#define MX53_PAD_PATA_DA_0__GPIO7_6				0x290 0x610 0x000 0x1 0x0
+#define MX53_PAD_PATA_DA_0__ESDHC3_RST				0x290 0x610 0x000 0x2 0x0
+#define MX53_PAD_PATA_DA_0__OWIRE_LINE				0x290 0x610 0x864 0x4 0x0
+#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2			0x290 0x610 0x000 0x7 0x0
+#define MX53_PAD_PATA_DA_1__PATA_DA_1				0x294 0x614 0x000 0x0 0x0
+#define MX53_PAD_PATA_DA_1__GPIO7_7				0x294 0x614 0x000 0x1 0x0
+#define MX53_PAD_PATA_DA_1__ESDHC4_CMD				0x294 0x614 0x000 0x2 0x0
+#define MX53_PAD_PATA_DA_1__UART3_CTS				0x294 0x614 0x000 0x4 0x0
+#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3			0x294 0x614 0x000 0x7 0x0
+#define MX53_PAD_PATA_DA_2__PATA_DA_2				0x298 0x618 0x000 0x0 0x0
+#define MX53_PAD_PATA_DA_2__GPIO7_8				0x298 0x618 0x000 0x1 0x0
+#define MX53_PAD_PATA_DA_2__ESDHC4_CLK				0x298 0x618 0x000 0x2 0x0
+#define MX53_PAD_PATA_DA_2__UART3_RTS				0x298 0x618 0x884 0x4 0x5
+#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4			0x298 0x618 0x000 0x7 0x0
+#define MX53_PAD_PATA_CS_0__PATA_CS_0				0x29c 0x61c 0x000 0x0 0x0
+#define MX53_PAD_PATA_CS_0__GPIO7_9				0x29c 0x61c 0x000 0x1 0x0
+#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX			0x29c 0x61c 0x000 0x4 0x0
+#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5			0x29c 0x61c 0x000 0x7 0x0
+#define MX53_PAD_PATA_CS_1__PATA_CS_1				0x2a0 0x620 0x000 0x0 0x0
+#define MX53_PAD_PATA_CS_1__GPIO7_10				0x2a0 0x620 0x000 0x1 0x0
+#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX			0x2a0 0x620 0x888 0x4 0x3
+#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6			0x2a0 0x620 0x000 0x7 0x0
+#define MX53_PAD_PATA_DATA0__PATA_DATA_0			0x2a4 0x628 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA0__GPIO2_0				0x2a4 0x628 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0			0x2a4 0x628 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4			0x2a4 0x628 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0		0x2a4 0x628 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0			0x2a4 0x628 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7			0x2a4 0x628 0x000 0x7 0x0
+#define MX53_PAD_PATA_DATA1__PATA_DATA_1			0x2a8 0x62c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA1__GPIO2_1				0x2a8 0x62c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1			0x2a8 0x62c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5			0x2a8 0x62c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1		0x2a8 0x62c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1			0x2a8 0x62c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA2__PATA_DATA_2			0x2ac 0x630 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA2__GPIO2_2				0x2ac 0x630 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2			0x2ac 0x630 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6			0x2ac 0x630 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2		0x2ac 0x630 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2			0x2ac 0x630 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA3__PATA_DATA_3			0x2b0 0x634 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA3__GPIO2_3				0x2b0 0x634 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3			0x2b0 0x634 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7			0x2b0 0x634 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3		0x2b0 0x634 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3			0x2b0 0x634 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA4__PATA_DATA_4			0x2b4 0x638 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA4__GPIO2_4				0x2b4 0x638 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4			0x2b4 0x638 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4			0x2b4 0x638 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4		0x2b4 0x638 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4			0x2b4 0x638 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA5__PATA_DATA_5			0x2b8 0x63c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA5__GPIO2_5				0x2b8 0x63c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5			0x2b8 0x63c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5			0x2b8 0x63c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5		0x2b8 0x63c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5			0x2b8 0x63c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA6__PATA_DATA_6			0x2bc 0x640 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA6__GPIO2_6				0x2bc 0x640 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6			0x2bc 0x640 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6			0x2bc 0x640 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6		0x2bc 0x640 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6			0x2bc 0x640 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA7__PATA_DATA_7			0x2c0 0x644 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA7__GPIO2_7				0x2c0 0x644 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7			0x2c0 0x644 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7			0x2c0 0x644 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7		0x2c0 0x644 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7			0x2c0 0x644 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA8__PATA_DATA_8			0x2c4 0x648 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA8__GPIO2_8				0x2c4 0x648 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4			0x2c4 0x648 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8			0x2c4 0x648 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0			0x2c4 0x648 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8		0x2c4 0x648 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8			0x2c4 0x648 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA9__PATA_DATA_9			0x2c8 0x64c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA9__GPIO2_9				0x2c8 0x64c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5			0x2c8 0x64c 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9			0x2c8 0x64c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1			0x2c8 0x64c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9		0x2c8 0x64c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9			0x2c8 0x64c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA10__PATA_DATA_10			0x2cc 0x650 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA10__GPIO2_10				0x2cc 0x650 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6			0x2cc 0x650 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10			0x2cc 0x650 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2			0x2cc 0x650 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10		0x2cc 0x650 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10			0x2cc 0x650 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA11__PATA_DATA_11			0x2d0 0x654 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA11__GPIO2_11				0x2d0 0x654 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7			0x2d0 0x654 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11			0x2d0 0x654 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3			0x2d0 0x654 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11		0x2d0 0x654 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11			0x2d0 0x654 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA12__PATA_DATA_12			0x2d4 0x658 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA12__GPIO2_12				0x2d4 0x658 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4			0x2d4 0x658 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12			0x2d4 0x658 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0			0x2d4 0x658 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12		0x2d4 0x658 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12			0x2d4 0x658 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA13__PATA_DATA_13			0x2d8 0x65c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA13__GPIO2_13				0x2d8 0x65c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5			0x2d8 0x65c 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13			0x2d8 0x65c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1			0x2d8 0x65c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13		0x2d8 0x65c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13			0x2d8 0x65c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA14__PATA_DATA_14			0x2dc 0x660 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA14__GPIO2_14				0x2dc 0x660 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6			0x2dc 0x660 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14			0x2dc 0x660 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2			0x2dc 0x660 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14		0x2dc 0x660 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14			0x2dc 0x660 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA15__PATA_DATA_15			0x2e0 0x664 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA15__GPIO2_15				0x2e0 0x664 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7			0x2e0 0x664 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15			0x2e0 0x664 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3			0x2e0 0x664 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15		0x2e0 0x664 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15			0x2e0 0x664 0x000 0x6 0x0
+#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0				0x2e4 0x66c 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA0__GPIO1_16				0x2e4 0x66c 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA0__GPT_CAPIN1				0x2e4 0x66c 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA0__CSPI_MISO				0x2e4 0x66c 0x784 0x5 0x2
+#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP			0x2e4 0x66c 0x778 0x7 0x0
+#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1				0x2e8 0x670 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA1__GPIO1_17				0x2e8 0x670 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA1__GPT_CAPIN2				0x2e8 0x670 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA1__CSPI_SS0				0x2e8 0x670 0x78c 0x5 0x3
+#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP			0x2e8 0x670 0x77c 0x7 0x1
+#define MX53_PAD_SD1_CMD__ESDHC1_CMD				0x2ec 0x674 0x000 0x0 0x0
+#define MX53_PAD_SD1_CMD__GPIO1_18				0x2ec 0x674 0x000 0x1 0x0
+#define MX53_PAD_SD1_CMD__GPT_CMPOUT1				0x2ec 0x674 0x000 0x3 0x0
+#define MX53_PAD_SD1_CMD__CSPI_MOSI				0x2ec 0x674 0x788 0x5 0x2
+#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP				0x2ec 0x674 0x770 0x7 0x0
+#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2				0x2f0 0x678 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA2__GPIO1_19				0x2f0 0x678 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2				0x2f0 0x678 0x000 0x2 0x0
+#define MX53_PAD_SD1_DATA2__PWM2_PWMO				0x2f0 0x678 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B			0x2f0 0x678 0x000 0x4 0x0
+#define MX53_PAD_SD1_DATA2__CSPI_SS1				0x2f0 0x678 0x790 0x5 0x2
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB		0x2f0 0x678 0x000 0x6 0x0
+#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP			0x2f0 0x678 0x774 0x7 0x0
+#define MX53_PAD_SD1_CLK__ESDHC1_CLK				0x2f4 0x67c 0x000 0x0 0x0
+#define MX53_PAD_SD1_CLK__GPIO1_20				0x2f4 0x67c 0x000 0x1 0x0
+#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT			0x2f4 0x67c 0x000 0x2 0x0
+#define MX53_PAD_SD1_CLK__GPT_CLKIN				0x2f4 0x67c 0x000 0x3 0x0
+#define MX53_PAD_SD1_CLK__CSPI_SCLK				0x2f4 0x67c 0x780 0x5 0x2
+#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0			0x2f4 0x67c 0x000 0x7 0x0
+#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3				0x2f8 0x680 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA3__GPIO1_21				0x2f8 0x680 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3				0x2f8 0x680 0x000 0x2 0x0
+#define MX53_PAD_SD1_DATA3__PWM1_PWMO				0x2f8 0x680 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B			0x2f8 0x680 0x000 0x4 0x0
+#define MX53_PAD_SD1_DATA3__CSPI_SS2				0x2f8 0x680 0x794 0x5 0x2
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB		0x2f8 0x680 0x000 0x6 0x0
+#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1			0x2f8 0x680 0x000 0x7 0x0
+#define MX53_PAD_SD2_CLK__ESDHC2_CLK				0x2fc 0x688 0x000 0x0 0x0
+#define MX53_PAD_SD2_CLK__GPIO1_10				0x2fc 0x688 0x000 0x1 0x0
+#define MX53_PAD_SD2_CLK__KPP_COL_5				0x2fc 0x688 0x840 0x2 0x2
+#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS			0x2fc 0x688 0x73c 0x3 0x1
+#define MX53_PAD_SD2_CLK__CSPI_SCLK				0x2fc 0x688 0x780 0x5 0x3
+#define MX53_PAD_SD2_CLK__SCC_RANDOM_V				0x2fc 0x688 0x000 0x7 0x0
+#define MX53_PAD_SD2_CMD__ESDHC2_CMD				0x300 0x68c 0x000 0x0 0x0
+#define MX53_PAD_SD2_CMD__GPIO1_11				0x300 0x68c 0x000 0x1 0x0
+#define MX53_PAD_SD2_CMD__KPP_ROW_5				0x300 0x68c 0x84c 0x2 0x1
+#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC			0x300 0x68c 0x738 0x3 0x1
+#define MX53_PAD_SD2_CMD__CSPI_MOSI				0x300 0x68c 0x788 0x5 0x3
+#define MX53_PAD_SD2_CMD__SCC_RANDOM				0x300 0x68c 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3				0x304 0x690 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA3__GPIO1_12				0x304 0x690 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA3__KPP_COL_6				0x304 0x690 0x844 0x2 0x1
+#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC			0x304 0x690 0x740 0x3 0x1
+#define MX53_PAD_SD2_DATA3__CSPI_SS2				0x304 0x690 0x794 0x5 0x3
+#define MX53_PAD_SD2_DATA3__SJC_DONE				0x304 0x690 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2				0x308 0x694 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA2__GPIO1_13				0x308 0x694 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA2__KPP_ROW_6				0x308 0x694 0x850 0x2 0x1
+#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD			0x308 0x694 0x734 0x3 0x1
+#define MX53_PAD_SD2_DATA2__CSPI_SS1				0x308 0x694 0x790 0x5 0x3
+#define MX53_PAD_SD2_DATA2__SJC_FAIL				0x308 0x694 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1				0x30c 0x698 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA1__GPIO1_14				0x30c 0x698 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA1__KPP_COL_7				0x30c 0x698 0x848 0x2 0x1
+#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS			0x30c 0x698 0x744 0x3 0x1
+#define MX53_PAD_SD2_DATA1__CSPI_SS0				0x30c 0x698 0x78c 0x5 0x4
+#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO			0x30c 0x698 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0				0x310 0x69c 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA0__GPIO1_15				0x310 0x69c 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA0__KPP_ROW_7				0x310 0x69c 0x854 0x2 0x1
+#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD			0x310 0x69c 0x730 0x3 0x1
+#define MX53_PAD_SD2_DATA0__CSPI_MISO				0x310 0x69c 0x784 0x5 0x3
+#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT			0x310 0x69c 0x000 0x7 0x0
+#define MX53_PAD_GPIO_0__CCM_CLKO				0x314 0x6a4 0x000 0x0 0x0
+#define MX53_PAD_GPIO_0__GPIO1_0				0x314 0x6a4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_0__KPP_COL_5				0x314 0x6a4 0x840 0x2 0x3
+#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK			0x314 0x6a4 0x000 0x3 0x0
+#define MX53_PAD_GPIO_0__EPIT1_EPITO				0x314 0x6a4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB				0x314 0x6a4 0x000 0x5 0x0
+#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR			0x314 0x6a4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_0__CSU_TD					0x314 0x6a4 0x000 0x7 0x0
+#define MX53_PAD_GPIO_1__ESAI1_SCKR				0x318 0x6a8 0x7dc 0x0 0x1
+#define MX53_PAD_GPIO_1__GPIO1_1				0x318 0x6a8 0x000 0x1 0x0
+#define MX53_PAD_GPIO_1__KPP_ROW_5				0x318 0x6a8 0x84c 0x2 0x2
+#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK			0x318 0x6a8 0x000 0x3 0x0
+#define MX53_PAD_GPIO_1__PWM2_PWMO				0x318 0x6a8 0x000 0x4 0x0
+#define MX53_PAD_GPIO_1__WDOG2_WDOG_B				0x318 0x6a8 0x000 0x5 0x0
+#define MX53_PAD_GPIO_1__ESDHC1_CD				0x318 0x6a8 0x000 0x6 0x0
+#define MX53_PAD_GPIO_1__SRC_TESTER_ACK				0x318 0x6a8 0x000 0x7 0x0
+#define MX53_PAD_GPIO_9__ESAI1_FSR				0x31c 0x6ac 0x7cc 0x0 0x1
+#define MX53_PAD_GPIO_9__GPIO1_9				0x31c 0x6ac 0x000 0x1 0x0
+#define MX53_PAD_GPIO_9__KPP_COL_6				0x31c 0x6ac 0x844 0x2 0x2
+#define MX53_PAD_GPIO_9__CCM_REF_EN_B				0x31c 0x6ac 0x000 0x3 0x0
+#define MX53_PAD_GPIO_9__PWM1_PWMO				0x31c 0x6ac 0x000 0x4 0x0
+#define MX53_PAD_GPIO_9__WDOG1_WDOG_B				0x31c 0x6ac 0x000 0x5 0x0
+#define MX53_PAD_GPIO_9__ESDHC1_WP				0x31c 0x6ac 0x7fc 0x6 0x1
+#define MX53_PAD_GPIO_9__SCC_FAIL_STATE				0x31c 0x6ac 0x000 0x7 0x0
+#define MX53_PAD_GPIO_3__ESAI1_HCKR				0x320 0x6b0 0x7d4 0x0 0x1
+#define MX53_PAD_GPIO_3__GPIO1_3				0x320 0x6b0 0x000 0x1 0x0
+#define MX53_PAD_GPIO_3__I2C3_SCL				0x320 0x6b0 0x824 0x2 0x1
+#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN				0x320 0x6b0 0x000 0x3 0x0
+#define MX53_PAD_GPIO_3__CCM_CLKO2				0x320 0x6b0 0x000 0x4 0x0
+#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0		0x320 0x6b0 0x000 0x5 0x0
+#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC			0x320 0x6b0 0x8a0 0x6 0x1
+#define MX53_PAD_GPIO_3__MLB_MLBCLK				0x320 0x6b0 0x858 0x7 0x2
+#define MX53_PAD_GPIO_6__ESAI1_SCKT				0x324 0x6b4 0x7e0 0x0 0x1
+#define MX53_PAD_GPIO_6__GPIO1_6				0x324 0x6b4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_6__I2C3_SDA				0x324 0x6b4 0x828 0x2 0x1
+#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0				0x324 0x6b4 0x000 0x3 0x0
+#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB			0x324 0x6b4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1		0x324 0x6b4 0x000 0x5 0x0
+#define MX53_PAD_GPIO_6__ESDHC2_LCTL				0x324 0x6b4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_6__MLB_MLBSIG				0x324 0x6b4 0x860 0x7 0x2
+#define MX53_PAD_GPIO_2__ESAI1_FST				0x328 0x6b8 0x7d0 0x0 0x1
+#define MX53_PAD_GPIO_2__GPIO1_2				0x328 0x6b8 0x000 0x1 0x0
+#define MX53_PAD_GPIO_2__KPP_ROW_6				0x328 0x6b8 0x850 0x2 0x2
+#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1				0x328 0x6b8 0x000 0x3 0x0
+#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0			0x328 0x6b8 0x000 0x4 0x0
+#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2		0x328 0x6b8 0x000 0x5 0x0
+#define MX53_PAD_GPIO_2__ESDHC2_WP				0x328 0x6b8 0x000 0x6 0x0
+#define MX53_PAD_GPIO_2__MLB_MLBDAT				0x328 0x6b8 0x85c 0x7 0x2
+#define MX53_PAD_GPIO_4__ESAI1_HCKT				0x32c 0x6bc 0x7d8 0x0 0x1
+#define MX53_PAD_GPIO_4__GPIO1_4				0x32c 0x6bc 0x000 0x1 0x0
+#define MX53_PAD_GPIO_4__KPP_COL_7				0x32c 0x6bc 0x848 0x2 0x2
+#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2				0x32c 0x6bc 0x000 0x3 0x0
+#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1			0x32c 0x6bc 0x000 0x4 0x0
+#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3		0x32c 0x6bc 0x000 0x5 0x0
+#define MX53_PAD_GPIO_4__ESDHC2_CD				0x32c 0x6bc 0x000 0x6 0x0
+#define MX53_PAD_GPIO_4__SCC_SEC_STATE				0x32c 0x6bc 0x000 0x7 0x0
+#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3				0x330 0x6c0 0x7ec 0x0 0x1
+#define MX53_PAD_GPIO_5__GPIO1_5				0x330 0x6c0 0x000 0x1 0x0
+#define MX53_PAD_GPIO_5__KPP_ROW_7				0x330 0x6c0 0x854 0x2 0x2
+#define MX53_PAD_GPIO_5__CCM_CLKO				0x330 0x6c0 0x000 0x3 0x0
+#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2			0x330 0x6c0 0x000 0x4 0x0
+#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4		0x330 0x6c0 0x000 0x5 0x0
+#define MX53_PAD_GPIO_5__I2C3_SCL				0x330 0x6c0 0x824 0x6 0x2
+#define MX53_PAD_GPIO_5__CCM_PLL1_BYP				0x330 0x6c0 0x770 0x7 0x1
+#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1				0x334 0x6c4 0x7f4 0x0 0x1
+#define MX53_PAD_GPIO_7__GPIO1_7				0x334 0x6c4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_7__EPIT1_EPITO				0x334 0x6c4 0x000 0x2 0x0
+#define MX53_PAD_GPIO_7__CAN1_TXCAN				0x334 0x6c4 0x000 0x3 0x0
+#define MX53_PAD_GPIO_7__UART2_TXD_MUX				0x334 0x6c4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_7__FIRI_RXD				0x334 0x6c4 0x80c 0x5 0x1
+#define MX53_PAD_GPIO_7__SPDIF_PLOCK				0x334 0x6c4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_7__CCM_PLL2_BYP				0x334 0x6c4 0x774 0x7 0x1
+#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0				0x338 0x6c8 0x7f8 0x0 0x1
+#define MX53_PAD_GPIO_8__GPIO1_8				0x338 0x6c8 0x000 0x1 0x0
+#define MX53_PAD_GPIO_8__EPIT2_EPITO				0x338 0x6c8 0x000 0x2 0x0
+#define MX53_PAD_GPIO_8__CAN1_RXCAN				0x338 0x6c8 0x760 0x3 0x2
+#define MX53_PAD_GPIO_8__UART2_RXD_MUX				0x338 0x6c8 0x880 0x4 0x5
+#define MX53_PAD_GPIO_8__FIRI_TXD				0x338 0x6c8 0x000 0x5 0x0
+#define MX53_PAD_GPIO_8__SPDIF_SRCLK				0x338 0x6c8 0x000 0x6 0x0
+#define MX53_PAD_GPIO_8__CCM_PLL3_BYP				0x338 0x6c8 0x778 0x7 0x1
+#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2				0x33c 0x6cc 0x7f0 0x0 0x1
+#define MX53_PAD_GPIO_16__GPIO7_11				0x33c 0x6cc 0x000 0x1 0x0
+#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT			0x33c 0x6cc 0x000 0x2 0x0
+#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1			0x33c 0x6cc 0x000 0x4 0x0
+#define MX53_PAD_GPIO_16__SPDIF_IN1				0x33c 0x6cc 0x870 0x5 0x1
+#define MX53_PAD_GPIO_16__I2C3_SDA				0x33c 0x6cc 0x828 0x6 0x2
+#define MX53_PAD_GPIO_16__SJC_DE_B				0x33c 0x6cc 0x000 0x7 0x0
+#define MX53_PAD_GPIO_17__ESAI1_TX0				0x340 0x6d0 0x7e4 0x0 0x1
+#define MX53_PAD_GPIO_17__GPIO7_12				0x340 0x6d0 0x000 0x1 0x0
+#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0			0x340 0x6d0 0x868 0x2 0x1
+#define MX53_PAD_GPIO_17__GPC_PMIC_RDY				0x340 0x6d0 0x810 0x3 0x1
+#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG			0x340 0x6d0 0x000 0x4 0x0
+#define MX53_PAD_GPIO_17__SPDIF_OUT1				0x340 0x6d0 0x000 0x5 0x0
+#define MX53_PAD_GPIO_17__IPU_SNOOP2				0x340 0x6d0 0x000 0x6 0x0
+#define MX53_PAD_GPIO_17__SJC_JTAG_ACT				0x340 0x6d0 0x000 0x7 0x0
+#define MX53_PAD_GPIO_18__ESAI1_TX1				0x344 0x6d4 0x7e8 0x0 0x1
+#define MX53_PAD_GPIO_18__GPIO7_13				0x344 0x6d4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1			0x344 0x6d4 0x86c 0x2 0x1
+#define MX53_PAD_GPIO_18__OWIRE_LINE				0x344 0x6d4 0x864 0x3 0x1
+#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG		0x344 0x6d4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK			0x344 0x6d4 0x768 0x5 0x1
+#define MX53_PAD_GPIO_18__ESDHC1_LCTL				0x344 0x6d4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST			0x344 0x6d4 0x000 0x7 0x0
+
+#endif /* __DTS_IMX53_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
new file mode 100644
index 0000000000000..70c4a4852256c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
@@ -0,0 +1,1122 @@
+/*
+ * Copyright 2014 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "General Electric CS ONE";
+	compatible = "ge,imx53-cpuvo", "fsl,imx53";
+
+	aliases {
+		spi0 = &cspi;
+		spi1 = &ecspi1;
+		spi2 = &ecspi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	cko2_11M: sgtl-clock-cko2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	achc_24M: achc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	sgtlsound: sound {
+		compatible = "fsl,imx53-cpuvo-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-cpuvo-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <6>;
+	};
+
+	reg_sgtl5k: regulator-sgtl5k {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-sgtl5k";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-0 = <&pinctrl_usb_otg_vbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usbh2_vbus: regulator-usbh2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh2_vbus>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbh3_vbus: regulator-usbh3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh3_vbus>;
+		gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_tsiref: regulator-tsiref {
+		compatible = "regulator-fixed";
+		regulator-name = "tsiref";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		/* TPS54320 */
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_lcd: regulator-3v3-lcd {
+		/* MIC2009 */
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_3V3";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	pwm_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
+				     38 40 43 45 48 51 53 56 58 61 63 66 68 71
+				     73 76 79 81 84 86 89 91 94 96 99 102 104
+				     107 109 112 114 117 119 122 124 127 130
+				     132 135 137 140 142 145 147 150 153 155
+				     158 160 163 165 168 170 173 175 178 181
+				     183 186 188 191 193 196 198 201 204 206
+				     209 211 214 216 219 221 224 226 229 232
+				     234 237 239 242 244 247 249 252 255>;
+		default-brightness-level = <0>;
+		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3_lcd>;
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "alarm-brightness";
+			pwms = <&pwm1 0 100000>;
+			max-brightness = <255>;
+		};
+	};
+
+	led-controller-2 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_alarmled_pins>;
+
+		led-2 {
+			label = "alarm:red";
+			gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "alarm:yellow";
+			gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			label = "alarm:blue";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			label = "alarm:silenced";
+			gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+		active-delay = <100>;
+		inactive-delay = <10>;
+		wait-delay = <100>;
+	};
+
+	power-gpio-keys {
+		compatible = "gpio-keys";
+
+		power-button {
+			label = "Power button";
+			gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	touch-lock-key {
+		compatible = "gpio-keys";
+
+		touch-lock-button {
+			label = "Touch lock button";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F12>;
+		};
+	};
+
+	usbphy2: usbphy-2 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_3v3>;
+		reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
+		clock-names = "main_clk";
+		clock-frequency = <24000000>;
+		clocks = <&clks IMX5_CLK_CKO2>;
+		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
+		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
+	};
+
+	usbphy3: usbphy-3 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_3v3>;
+		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+		clock-names = "main_clk";
+
+		clock-frequency = <24000000>;
+		clocks = <&clks IMX5_CLK_CKO2>;
+		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
+		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
+	};
+
+	panel-lvds0 {
+		compatible = "nvd,9128";
+		power-supply = <&reg_3v3_lcd>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&usbphy0 {
+	vcc-supply = <&reg_3v3>;
+};
+
+&usbphy1 {
+	vcc-supply = <&reg_3v3>;
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&cpu0 {
+	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+		1000000 1200000
+	>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW
+		    &gpio4 10 GPIO_ACTIVE_LOW
+		    &gpio4 11 GPIO_ACTIVE_LOW
+		    &gpio4 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev0: spi@1 {
+		compatible = "ge,achc", "nxp,kinetis-k20";
+		reg = <1>, <0>;
+		vdd-supply = <&reg_3v3>;
+		vdda-supply = <&reg_3v3>;
+		clocks = <&achc_24M>;
+		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	gpioxra0: gpio@2 {
+		compatible = "exar,xra1403";
+		reg = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		spi-max-frequency = <1000000>;
+	};
+
+	gpioxra1: gpio@3 {
+		compatible = "exar,xra1403";
+		reg = <3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	da9053@0 {
+		compatible = "dlg,da9053-aa";
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <1000000>;
+		dlg,tsi-as-adc;
+		tsiref-supply = <&reg_tsiref>;
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "BUCKCORE";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "BUCKPRO";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "BUCKMEM";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-name = "BUCKPERI";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "ldo1_1v3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2_1v3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "ldo3_3v3";
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "ldo4_2v775";
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-name = "ldo5_3v3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-name = "ldo6_1v3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-name = "ldo7_2v75";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-name = "ldo8_1v8";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-name = "ldo9_1v5";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-name = "ldo10_1v3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-supply = <&reg_3v3>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+
+		i2c4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			sgtl5000: codec@a {
+				compatible = "fsl,sgtl5000";
+				reg = <0xa>;
+				#sound-dai-cells = <0>;
+				VDDA-supply = <&reg_sgtl5k>;
+				VDDIO-supply = <&reg_sgtl5k>;
+				clocks = <&cko2_11M>;
+				status = "okay";
+			};
+		};
+
+		i2c5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			rtc@30 {
+			       compatible = "sii,s35390a";
+			       reg = <0x30>;
+			};
+
+			temp@48 {
+				compatible = "ti,tmp112";
+				reg = <0x48>;
+			};
+
+			mma8453q: accelerometer@1c {
+				compatible = "fsl,mma8453";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <6 IRQ_TYPE_NONE>;
+				interrupt-names = "INT1";
+			};
+
+			mpl3115: pressure-sensor@60 {
+				compatible = "fsl,mpl3115";
+				reg = <0x60>;
+			};
+
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c08";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c8: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c9: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c10: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c11: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	touchscreen@4b {
+		compatible = "atmel,maxtouch";
+		reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>;
+		reg = <0x4b>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+
+		port@2 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,dma-info = <24 20>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,dma-info = <4096 4>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	phy_type = "utmi";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-0 = <&pinctrl_usb_otg>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	phy_type = "ulpi";
+	dr_mode = "host";
+	fsl,usbphy = <&usbphy2>;
+	vbus-supply = <&reg_usbh2_vbus>;
+	status = "okay";
+};
+
+&usbh3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh3>;
+	phy_type = "ulpi";
+	dr_mode = "host";
+	vbus-supply = <&reg_usbh3_vbus>;
+	fsl,usbphy = <&usbphy3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_rev6>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD	0x400
+			MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD	0x400
+			MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC	0x400
+			MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS	0x400
+			MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC	0x400
+			MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS	0x400
+			MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD	0x400
+			MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD	0x400
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT21__ECSPI1_MOSI	0x400
+			MX53_PAD_DISP0_DAT22__ECSPI1_MISO	0x400
+			MX53_PAD_DISP0_DAT20__ECSPI1_SCLK	0x400
+			/* ECSPI1_SS0, must treat as GPIO for EzPort */
+			MX53_PAD_DISP0_DAT23__GPIO5_17		0x400
+			MX53_PAD_KEY_COL2__GPIO4_10		0x0
+			MX53_PAD_KEY_ROW2__GPIO4_11		0x0
+			MX53_PAD_KEY_COL3__GPIO4_12		0x0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_CS1__ECSPI2_MOSI		0x0
+			MX53_PAD_EIM_OE__ECSPI2_MISO		0x0
+			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0x0
+			MX53_PAD_EIM_RW__GPIO2_26		0x0
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_esdhc3: esdhc3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+			MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+			MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+			MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+			MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+			MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+			MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+			MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+			MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+			MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x0
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x0
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x0
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x0
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x0
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x0
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x0
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x0
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x0
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x0
+		>;
+	};
+
+	pinctrl_hog_rev6: hoggrp {
+		fsl,pins = <
+			/* CKO2 */
+			MX53_PAD_GPIO_3__CCM_CLKO2		0x4
+			/* DEFIB_SYNC_MARKER_IN_IRQ */
+			MX53_PAD_GPIO_5__GPIO1_5		0x0
+			/* ACCELEROMETER_DATA_RDY_N */
+			MX53_PAD_GPIO_6__GPIO1_6		0x0
+			/* TEMPERATURE_ALERT_N */
+			MX53_PAD_GPIO_7__GPIO1_7		0x0
+			/* BAROMETRIC_PRESSURE_DATA_RDY_N */
+			MX53_PAD_GPIO_8__GPIO1_8		0x0
+			/* DOCKING_I2C_INTERFACE_IRQ_N */
+			MX53_PAD_PATA_DATA4__GPIO2_4		0x0
+			/* PWR_OUT_TO_DOCK_FAULT_N */
+			MX53_PAD_PATA_DATA5__GPIO2_5		0x0
+			/* ENABLE_PWR_TO_DOCK_N */
+			MX53_PAD_PATA_DATA6__GPIO2_6		0x0
+			/* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */
+			MX53_PAD_PATA_DATA7__GPIO2_7		0x0
+			/* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */
+			MX53_PAD_PATA_DATA12__GPIO2_12		0x0
+			/* DOCK_PRESENT_N */
+			MX53_PAD_PATA_DATA13__GPIO2_13		0x0
+			/* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */
+			MX53_PAD_PATA_DATA14__GPIO2_14		0x0
+			/* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */
+			MX53_PAD_PATA_DATA15__GPIO2_15		0x0
+			/* RESET_IMX535_ETHERNET_PHY_N */
+			MX53_PAD_EIM_A22__GPIO2_16		0x0
+			/* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */
+			MX53_PAD_EIM_A21__GPIO2_17		0x0
+			/* RESET_I2C1_BUS_SEGMENT_MUX_N */
+			MX53_PAD_EIM_A20__GPIO2_18		0x0
+			/* RESET_IMX535_USB_HOST3_PHY_N */
+			MX53_PAD_EIM_A19__GPIO2_19		0x0
+			/* ESDHC3_EMMC_NAND_RST_N */
+			MX53_PAD_EIM_A18__GPIO2_20		0x0
+			/* LCD_AND_UI_INTERFACE_PWR_FAULT_N */
+			MX53_PAD_EIM_A17__GPIO2_21		0x0
+			/* POWER_DOWN_LVDS0_DESERIALIZER_N */
+			MX53_PAD_EIM_A16__GPIO2_22		0x0
+			/* POWER_DOWN_LVDS1_DESERIALIZER_N */
+			MX53_PAD_EIM_LBA__GPIO2_27		0x0
+			/* RESET_DP0_TRANSMITTER_N */
+			MX53_PAD_EIM_EB0__GPIO2_28		0x0
+			/* RESET_DP1_TRANSMITTER_N */
+			MX53_PAD_EIM_EB1__GPIO2_29		0x0
+			/* ENABLE_SPDIF_AUDIO_TO_DP0 */
+			MX53_PAD_EIM_DA0__GPIO3_0		0x0
+			/* ENABLE_SPDIF_AUDIO_TO_DP1 */
+			MX53_PAD_EIM_DA1__GPIO3_1		0x0
+			/* LVDS1_MUX_CTRL */
+			MX53_PAD_EIM_DA2__GPIO3_2		0x0
+			/* LVDS0_MUX_CTRL */
+			MX53_PAD_EIM_DA3__GPIO3_3		0x0
+			/* DP1_TRANSMITTER_IRQ */
+			MX53_PAD_EIM_DA4__GPIO3_4		0x0
+			/* DP0_TRANSMITTER_IRQ */
+			MX53_PAD_EIM_DA5__GPIO3_5		0x0
+			/* USB_RESET_N */
+			MX53_PAD_EIM_DA6__GPIO3_6		0x0
+			/* ENABLE_BATTERY_CHARGER */
+			MX53_PAD_EIM_DA7__GPIO3_7		0x0
+			/* SOFTWARE_CONTROLLED_PWR_CYCLE */
+			MX53_PAD_EIM_DA8__GPIO3_8		0x0
+			/* SOFTWARE_CONTROLLED_POWERDOWN */
+			MX53_PAD_EIM_DA9__GPIO3_9		0x0
+			/* DC_PWR_IN_OK */
+			MX53_PAD_EIM_DA10__GPIO3_10		0x0
+			/* BATT_PRESENT_N */
+			MX53_PAD_EIM_DA11__GPIO3_11		0xe4
+			/* PMIC_IRQ_N */
+			MX53_PAD_EIM_DA12__GPIO3_12		0x0
+			/* PMIC_VDD_FAULT_STATUS_N */
+			MX53_PAD_EIM_DA13__GPIO3_13		0x0
+			/* IMX535_ETHERNET_PHY_STATUS_IRQ_N */
+			MX53_PAD_EIM_DA14__GPIO3_14		0x0
+			/* NOT USED - AVAILABLE 3.3V GPIO */
+			MX53_PAD_EIM_DA15__GPIO3_15		0x0
+			/* NOT USED - AVAILABLE 3.3V GPIO */
+			MX53_PAD_EIM_D22__GPIO3_22		0x0
+			/* NOT USED - AVAILABLE 3.3V GPIO */
+			MX53_PAD_EIM_D24__GPIO3_24		0x0
+			/* NBP_PUMP_VALVE_PWR_ENABLE */
+			MX53_PAD_EIM_D25__GPIO3_25		0x0
+			/* NIBP_RESET_N */
+			MX53_PAD_EIM_D26__GPIO3_26		0x0
+			/* LATCHED_OVERPRESSURE_N */
+			MX53_PAD_EIM_D27__GPIO3_27		0x0
+			/* NBP_SBWTCLK */
+			MX53_PAD_EIM_D29__GPIO3_29		0x0
+			/* ENABLE_WIFI_MODULE */
+			MX53_PAD_GPIO_11__GPIO4_1		0x400
+			/* WIFI_MODULE_IRQ_N */
+			MX53_PAD_GPIO_12__GPIO4_2		0x400
+			/* ENABLE_BLUETOOTH_MODULE */
+			MX53_PAD_GPIO_13__GPIO4_3		0x400
+			/* RESET_IMX535_USB_HOST2_PHY_N */
+			MX53_PAD_GPIO_14__GPIO4_4		0x400
+			/* ONKEY_IS_DEPRESSED */
+			MX53_PAD_KEY_ROW3__GPIO4_13		0x0
+			/* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */
+			MX53_PAD_EIM_WAIT__GPIO5_0		0x0
+			/* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */
+			MX53_PAD_EIM_A25__GPIO5_2		0x0
+			/* I2C_PCAP_TOUCHSCREEN_IRQ_N */
+			MX53_PAD_EIM_A24__GPIO5_4		0x0
+			/* NOT USED - AVAILABLE 1.8V GPIO */
+			MX53_PAD_DISP0_DAT13__GPIO5_7		0x400
+			/* NOT USED - AVAILABLE 1.8V GPIO */
+			MX53_PAD_DISP0_DAT14__GPIO5_8		0x400
+			/* NOT USED - AVAILABLE 1.8V GPIO */
+			MX53_PAD_DISP0_DAT15__GPIO5_9		0x400
+			/* HOST_CONTROLLED_RESET_TO_LCD_N */
+			MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x0
+			/* HOST_CONTROLLED_RESET_TO_PCAP_N */
+			MX53_PAD_CSI0_MCLK__GPIO5_19		0x0
+			/* LR_SCAN_CTRL */
+			MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x0
+			/* UD_SCAN_CTRL */
+			MX53_PAD_CSI0_VSYNC__GPIO5_21		0x0
+			/* DATA_WIDTH_CTRL */
+			MX53_PAD_CSI0_DAT10__GPIO5_28		0x0
+			/* BACKLIGHT_ENABLE */
+			MX53_PAD_CSI0_DAT11__GPIO5_29		0x0
+			/* MED_USB_PORT_1_HOST_SELECT */
+			MX53_PAD_EIM_A23__GPIO6_6		0x0
+			/* MED_USB_PORT_2_HOST_SELECT */
+			MX53_PAD_NANDF_CLE__GPIO6_7		0x0
+			/* MED_USB_PORT_3_HOST_SELECT */
+			MX53_PAD_NANDF_ALE__GPIO6_8		0x0
+			/* MED_USB_PORT_4_HOST_SELECT */
+			MX53_PAD_NANDF_WP_B__GPIO6_9		0x0
+			/* MED_USB_PORT_5_HOST_SELECT */
+			MX53_PAD_NANDF_RB0__GPIO6_10		0x0
+			/* MED_USB_PORT_6_HOST_SELECT */
+			MX53_PAD_NANDF_CS0__GPIO6_11		0x0
+			/* MED_USB_PORT_7_HOST_SELECT */
+			MX53_PAD_NANDF_WE_B__GPIO6_12		0x0
+			/* MED_USB_PORT_8_HOST_SELECT */
+			MX53_PAD_NANDF_RE_B__GPIO6_13		0x0
+			/* MED_USB_PORT_TO_IMX_SELECT_0 */
+			MX53_PAD_NANDF_CS1__GPIO6_14		0x0
+			/* MED_USB_PORT_TO_IMX_SELECT_1 */
+			MX53_PAD_NANDF_CS2__GPIO6_15		0x0
+			/* MED_USB_PORT_TO_IMX_SELECT_2 */
+			MX53_PAD_NANDF_CS3__GPIO6_16		0x0
+			/* POWER_AND_BOOT_STATUS_INDICATOR */
+			MX53_PAD_PATA_INTRQ__GPIO7_2		0x1e4
+			/* RUNNING_ON_BATTERY_INDICATOR_GREEN */
+			MX53_PAD_GPIO_16__GPIO7_11		0x0
+			/* BATTERY_STATUS_INDICATOR_AMBER */
+			MX53_PAD_GPIO_17__GPIO7_12		0x0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D28__GPIO3_28		0x1e4
+			MX53_PAD_EIM_D21__GPIO3_21		0x1e4
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_EB2__I2C2_SCL		0x400001e4
+			MX53_PAD_EIM_D16__I2C2_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__GPIO3_16		0x1e4
+			MX53_PAD_EIM_EB2__GPIO2_30		0x1e4
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D17__I2C3_SCL		0x400001e4
+			MX53_PAD_EIM_D18__I2C3_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D18__GPIO3_18		0x1e4
+			MX53_PAD_EIM_D17__GPIO3_17		0x1e4
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_9__PWM1_PWMO		0x5
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT9__PWM2_PWMO		0x5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			MX53_PAD_EIM_D23__UART3_CTS		0x1e4
+			MX53_PAD_EIM_EB3__UART3_RTS		0x1e4
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__UART4_TXD_MUX	0x1e4
+			MX53_PAD_KEY_ROW0__UART4_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL1__UART5_TXD_MUX	0x1e4
+			MX53_PAD_KEY_ROW1__UART5_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_usb_otg_vbus: usb-otg-vbusgrp {
+		fsl,pins = <
+			/* USB_HS_OTG_VBUS_ENABLE */
+			MX53_PAD_KEY_ROW4__GPIO4_15		0x1c4
+		>;
+	};
+
+	pinctrl_usbh2: usbh2grp {
+		fsl,pins = <
+			/* USB H2 */
+			MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180
+			MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180
+			MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180
+			MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180
+			MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180
+			MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180
+			MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180
+			MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180
+			MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP	 0x180
+			MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT	 0x180
+			MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK	 0x180
+			MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR	 0x5
+			MX53_PAD_EIM_D30__USBOH3_USBH2_OC	 0x180
+		>;
+	};
+
+	pinctrl_usbh2_vbus: usbh2-vbusgrp {
+		fsl,pins = <
+			/* USB_HS_HOST2_VBUS_ENABLE */
+			MX53_PAD_EIM_D31__GPIO3_31		0x0
+		>;
+	};
+
+	pinctrl_usbh3_vbus: usbh3-vbusgrp {
+		fsl,pins = <
+			/* USB_HS_HOST3_VBUS_ENABLE */
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0x0
+		>;
+	};
+
+	pinctrl_usbh3: usbh3grp {
+		fsl,pins = <
+			/* USB H3 */
+			MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180
+			MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180
+			MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180
+			MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180
+			MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180
+			MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180
+			MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180
+			MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180
+			MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR	 0x5
+			MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK	 0x180
+			MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT	 0x180
+			MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP	 0x180
+			MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC	 0x180
+		>;
+	};
+
+	pinctrl_usb_otg: usbotggrp {
+		fsl,pins = <
+			/* USB_OTG_FAULT_N */
+			MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC	0x180
+		>;
+	};
+
+	pinctrl_alarmled_pins: qmx6alarmledgrp {
+		fsl,pins = <
+			/* ACTIVATE_ALARM_LIGHT_RED */
+			MX53_PAD_PATA_DIOR__GPIO7_3		0x0
+			/* ACTIVATE_ALARM_LIGHT_YELLOW */
+			MX53_PAD_PATA_DA_1__GPIO7_7		0x0
+			/* ACTIVATE_ALARM_LIGHT_CYAN */
+			MX53_PAD_PATA_DA_2__GPIO7_8		0x0
+			/* AUDIO_ALARMS_SILENCED_INDICATOR */
+			MX53_PAD_GPIO_18__GPIO7_13		0x0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
new file mode 100644
index 0000000000000..50fef8dd3675b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx53.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	display0: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio7_7>;
+
+		led-user {
+			label = "Heartbeat";
+			gpios = <&gpio7 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p2v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_usb_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 8 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx53-qsb-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-qsb-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&cpu0 {
+	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+		1000000 1200000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-qsb {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
+				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
+				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
+				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
+				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
+				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
+			>;
+		};
+
+		led_pin_gpio7_7: led_gpio7_7 {
+			fsl,pins = <
+				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_codec: codecgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+				MX53_PAD_EIM_DA13__GPIO3_13		0xe4
+			>;
+		};
+
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x4
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
+			>;
+		};
+
+		/* open drain */
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_ipu_disp0: ipudisp0grp {
+			fsl,pins = <
+				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+			>;
+		};
+
+		pinctrl_vga_sync: vgasync-grp {
+			fsl,pins = <
+				/* VGA_HSYNC, VSYNC with max drive strength */
+				MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
+				MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			>;
+		};
+	};
+};
+
+&tve {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vga_sync>;
+	ddc-i2c-bus = <&i2c2>;
+	fsl,tve-mode = "vga";
+	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
+	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb.dts b/arch/arm/boot/dts/nxp/imx/imx53-qsb.dts
new file mode 100644
index 0000000000000..6831836bd726c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include "imx53-qsb-common.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Quick Start Board";
+	compatible = "fsl,imx53-qsb", "fsl,imx53";
+};
+
+&i2c1 {
+	pmic: dialog@48 {
+		compatible = "dlg,da9053-aa", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <2750000>;
+				regulator-max-microvolt = <2750000>;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&tve {
+	dac-supply = <&ldo7_reg>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts
new file mode 100644
index 0000000000000..1bbf24ad308a1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx53-qsb-common.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Quick Start-R Board";
+	compatible = "fsl,imx53-qsrb", "fsl,imx53";
+};
+
+&iomuxc {
+	imx53-qsrb {
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1c4 /* IRQ */
+			>;
+		};
+	};
+};
+
+&i2c1 {
+	pmic: mc34708@8 {
+		compatible = "fsl,mc34708";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x08>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		regulators {
+			sw1_reg: sw1a {
+				regulator-name = "SW1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1437500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw1b_reg: sw1b {
+				regulator-name = "SW1B";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1437500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "SW2";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1437500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-name = "SW3";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1425000>;
+				regulator-boot-on;
+			};
+
+			sw4a_reg: sw4a {
+				regulator-name = "SW4A";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4b_reg: sw4b {
+				regulator-name = "SW4B";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw5_reg: sw5 {
+				regulator-name = "SW5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-name = "SWBST";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-name = "VPLL";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			vrefddr_reg: vrefddr {
+				regulator-name = "VREFDDR";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-name = "VUSB";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-name = "VUSB2";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdac_reg: vdac {
+				regulator-name = "VDAC";
+				regulator-min-microvolt = <2750000>;
+				regulator-max-microvolt = <2750000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-name = "VGEN1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-name = "VGEN2";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&tve {
+	dac-supply = <&vdac_reg>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts
new file mode 100644
index 0000000000000..1a00d290092ad
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx53.dtsi"
+
+/ {
+	model = "StarterKit SK-iMX53 Board";
+	compatible = "starterkit,sk-imx53", "fsl,imx53";
+
+	aliases {
+		/*
+		 * iMX RTC is not battery powered on this board.
+		 * Use the i2c RTC as rtc0.
+		 */
+		rtc0 = &rtc;
+		rtc1 = &srtc;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		/* v2 had only 256 MB, v3 has 512 MB */
+		reg = <0x70000000 0x20000000>;
+	};
+
+	reg_usb1_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&cpu0 {
+	/* CPU rated to 800 MHz, not the default 1.2GHz. */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+	>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&esdhc1 {
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x1e4
+			MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x1e4
+			MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x1e4
+			MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x1e4
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_INTRQ__CAN1_TXCAN		0x1e4
+			MX53_PAD_PATA_DIOR__CAN1_RXCAN		0x1e4
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x1e4
+			MX53_PAD_EIM_D17__ECSPI1_MISO		0x1e4
+			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x1e4
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT9__ECSPI2_MOSI		0x1e4
+			MX53_PAD_CSI0_DAT10__ECSPI2_MISO	0x1e4
+			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0x1e4
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			MX53_PAD_EIM_DA14__GPIO3_14		0x1f0
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
+			MX53_PAD_GPIO_1__GPIO1_1		0x1c4
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA             0x400001e4
+			MX53_PAD_EIM_EB2__I2C2_SCL		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__GPIO4_13		0x1e4
+			MX53_PAD_EIM_EB2__GPIO2_30		0x1e4
+		>;
+	};
+
+	pinctrl_nand: nandgrp {
+		fsl,pins = <
+			MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+			MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+			MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+			MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+			MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+			MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+			MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+			MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1	0x4
+			MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2	0x4
+			MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3	0x4
+			MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
+			MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
+			MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
+			MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
+			MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
+			MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
+			MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
+			MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_9__PWM1_PWMO		0x5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D24__UART3_TXD_MUX		0x1e4
+			MX53_PAD_EIM_D25__UART3_RXD_MUX		0x1e4
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__UART4_TXD_MUX	0x1e4
+			MX53_PAD_KEY_ROW0__UART4_RXD_MUX	0x1e4
+		>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x00100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u-boot";
+			reg = <0x00100000 0x00100000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x00200000 0x00100000>;
+			read-only;
+		};
+
+		partition@1000000 {
+			label = "kernel-safe";
+			reg = <0x01000000 0x00a00000>;
+			read-only;
+		};
+
+		partition@1a00000 {
+			label = "kernel";
+			reg = <0x01a00000 0x005e0000>;
+		};
+
+		partition@2000000 {
+			label = "ubifs";
+			reg = <0x02000000 0x0e000000>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	phy_type = "utmi";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-smd.dts b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts
new file mode 100644
index 0000000000000..f8d17967a67ef
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx53.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Smart Mobile Reference Design Board";
+	compatible = "fsl,imx53-smd", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 0>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 0>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	non-removable;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	zigbee: mc1323@0 {
+		compatible = "fsl,mc1323";
+		spi-max-frequency = <8000000>;
+		reg = <0>;
+	};
+
+	flash: m25p32@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-smd {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
+				MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
+				MX53_PAD_EIM_EB2__GPIO2_30     0x80000000
+				MX53_PAD_EIM_DA13__GPIO3_13    0x80000000
+				MX53_PAD_EIM_D19__GPIO3_19     0x80000000
+				MX53_PAD_KEY_ROW2__GPIO4_11    0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6    0x80000000
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_ipu_csi0: ipucsi0grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12    0x1c4
+				MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13    0x1c4
+				MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14    0x1c4
+				MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15    0x1c4
+				MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16    0x1c4
+				MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17    0x1c4
+				MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18    0x1c4
+				MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19    0x1c4
+				MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4
+				MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC   0x1e4
+				MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC    0x1e4
+				MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4
+			>;
+		};
+
+		pinctrl_ov5642: ov5642grp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WP_B__GPIO6_9   0x1e4
+				MX53_PAD_NANDF_RB0__GPIO6_10   0x1e4
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+	};
+
+	magnetometer: mag3110@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+	};
+
+	touchkey: mpr121@5a {
+		compatible = "fsl,mpr121";
+		reg = <0x5a>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+
+	camera: ov5642@3c {
+		compatible = "ovti,ov5642";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>,
+				  <&clks IMX5_CLK_SSI_EXT1_COM_SEL>;
+		assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>,
+					 <&clks IMX5_CLK_SSI_EXT1_PODF>;
+		assigned-clock-rates = <0>, <24000000>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+		clock-names = "xclk";
+		DVDD-supply = <&ldo9_reg>;
+		AVDD-supply = <&ldo7_reg>;
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			ov5642_to_ipu_csi0: endpoint {
+				remote-endpoint = <&ipu_csi0_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3650000>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ipu_csi0_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu_csi0>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu_csi0>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
new file mode 100644
index 0000000000000..d930739674a19
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "TQ TQMa53";
+	compatible = "tq,tqma53", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>,
+		    <&pinctrl_esdhc2_cdwp>;
+	vmmc-supply = <&reg_3p3v>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
+		   <&gpio3 24 GPIO_ACTIVE_LOW>, <&gpio3 25 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&esdhc3 { /* EMMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-tqma53 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
+				 MX53_PAD_PATA_DA_1__GPIO7_7     0x80000000 /* LCD_BLT_EN */
+				 MX53_PAD_PATA_DA_2__GPIO7_8     0x80000000 /* LCD_RESET */
+				 MX53_PAD_PATA_DATA5__GPIO2_5    0x80000000 /* LCD_POWER */
+				 MX53_PAD_PATA_DATA6__GPIO2_6    0x80000000 /* PMIC_INT */
+				 MX53_PAD_PATA_DATA14__GPIO2_14  0x80000000 /* CSI_RST */
+				 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* CSI_PWDN */
+				 MX53_PAD_GPIO_19__GPIO4_5 	 0x80000000 /* #SYSTEM_DOWN */
+				 MX53_PAD_GPIO_3__GPIO1_3        0x80000000
+				 MX53_PAD_PATA_DA_0__GPIO7_6	 0x80000000 /* #PHY_RESET */
+				 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL2__CAN1_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW2__CAN1_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_cspi: cspigrp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__CSPI_MISO		0x1d5
+				MX53_PAD_SD1_CMD__CSPI_MOSI		0x1d5
+				MX53_PAD_SD1_CLK__CSPI_SCLK		0x1d5
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc2_cdwp: esdhc2cdwp {
+			fsl,pins = <
+				MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
+				MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
+			>;
+		};
+
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			>;
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+};
+
+&cspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi>;
+	cs-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>, <&gpio1 19 GPIO_ACTIVE_LOW>,
+		   <&gpio1 21 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: mc34708@8 {
+		compatible = "fsl,mc34708";
+		reg = <0x8>;
+		fsl,mc13xxx-uses-rtc;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 4>; /* PATA_DATA6, active high */
+	};
+
+	sensor1: lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts
new file mode 100644
index 0000000000000..a7f77527269d5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts
@@ -0,0 +1,351 @@
+/*
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module (LCD)";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	aliases {
+		display = &display;
+	};
+
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb24_vga1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	reg_lcd_pwr: regulator-lcd-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <660>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	imx53-tx53-x03x {
+		pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 {
+			fsl,pins = <
+				MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
+				MX53_PAD_EIM_A16__GPIO2_22   0x04 /* Reset */
+				MX53_PAD_EIM_A17__GPIO2_21   0x04 /* Wake */
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
+				MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
+				MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
+				MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
+				MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
+				MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
+				MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
+				MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
+			>;
+		};
+
+		pinctrl_rgb24_vga1: rgb24-vgagrp1 {
+			fsl,pins = <
+				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		0x5
+				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
+				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			0x5
+				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			0x5
+				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
+				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
+				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
+				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
+				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
+				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
+				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
+				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
+				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
+				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
+				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
+				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
+				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
+				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
+				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
+				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
+				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
+				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
+				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
+				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
+				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
+				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
+				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
+				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
+			>;
+		};
+
+		pinctrl_tsc2007: tsc2007grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	/* sample keymap */
+	/* row/col 0,1 are mapped to KPP row/col 6,7 */
+	linux,keymap = <
+		MATRIX_KEY(6, 6, KEY_POWER)
+		MATRIX_KEY(6, 7, KEY_KP0)
+		MATRIX_KEY(6, 2, KEY_KP1)
+		MATRIX_KEY(6, 3, KEY_KP2)
+		MATRIX_KEY(7, 6, KEY_KP3)
+		MATRIX_KEY(7, 7, KEY_KP4)
+		MATRIX_KEY(7, 2, KEY_KP5)
+		MATRIX_KEY(7, 3, KEY_KP6)
+		MATRIX_KEY(2, 6, KEY_KP7)
+		MATRIX_KEY(2, 7, KEY_KP8)
+		MATRIX_KEY(2, 2, KEY_KP9)
+	>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts
new file mode 100644
index 0000000000000..6cdf2082c742c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts
@@ -0,0 +1,262 @@
+/*
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module (LVDS)";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	reg_lcd_pwr0: regulator-lvds0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LVDS0 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_lcd_pwr1: regulator-lvds1-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LVDS1 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+};
+
+&iomuxc {
+	imx53-tx53-x13x {
+		pinctrl_lvds0: lvds0grp {
+			fsl,pins = <
+				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+			>;
+		};
+
+		pinctrl_lvds1: lvds1grp {
+			fsl,pins = <
+				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
+		};
+
+		pinctrl_eeti1: eeti1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
+			>;
+		};
+
+		pinctrl_eeti2: eeti2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds0_timing0>;
+
+			lvds0_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hsync-len = <60>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vsync-len = <10>;
+				vfront-porch = <7>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			lvds0_timing1: nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hsync-len = <60>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vsync-len = <13>;
+				vfront-porch = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds1_timing0>;
+
+			lvds1_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hsync-len = <60>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vsync-len = <10>;
+				vfront-porch = <7>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi
new file mode 100644
index 0000000000000..a439a47fb65ac
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi
@@ -0,0 +1,584 @@
+/*
+ * Copyright 2012-2017 <LW@KARO-electronics.de>
+ * based on imx53-qsb.dts
+ *   Copyright 2011 Freescale Semiconductor, Inc.
+ *   Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx53.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	/* Will be filled by the bootloader */
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0>;
+	};
+
+	aliases {
+		can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
+		can1 = &can1;
+		ipu = &ipu;
+		reg-can-xcvr = &reg_can_xcvr;
+		usbh1 = &usbh1;
+		usbotg = &usbotg;
+	};
+
+	clocks {
+		ckih1 {
+			clock-frequency = <0>;
+		};
+	};
+
+	mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_key>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <116>; /* KEY_POWER */
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stk5led>;
+
+		led-user {
+			label = "Heartbeat";
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
+		model = "tx53-audio-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		/* '1' based port numbers according to datasheet names */
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	cs-gpios = <
+		&gpio2 30 GPIO_ACTIVE_HIGH
+		&gpio3 19 GPIO_ACTIVE_HIGH
+	>;
+
+};
+
+&esdhc1 {
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&esdhc2 {
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy0>;
+	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-0 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rtc1: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ds1339>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		trickle-resistor-ohms = <250>;
+		trickle-diode-disable;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-tx53 {
+		pinctrl_hog: hoggrp {
+			/* pins not in use by any device on the Starterkit board series */
+			fsl,pins = <
+				/* CMOS Sensor Interface */
+				MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
+				MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
+				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
+				MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
+				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
+				MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
+				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
+				MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
+				MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
+				MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
+				MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
+				MX53_PAD_GPIO_0__GPIO1_0 0x1f4
+				/* Module Specific Signal */
+				/* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
+				/* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
+				MX53_PAD_EIM_D29__GPIO3_29 0x1f4
+				MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
+				/* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
+				/* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
+				MX53_PAD_EIM_A19__GPIO2_19 0x1f4
+				MX53_PAD_EIM_A20__GPIO2_18 0x1f4
+				MX53_PAD_EIM_A21__GPIO2_17 0x1f4
+				MX53_PAD_EIM_A22__GPIO2_16 0x1f4
+				MX53_PAD_EIM_A23__GPIO6_6 0x1f4
+				MX53_PAD_EIM_A24__GPIO5_4 0x1f4
+				MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
+				MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
+				MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
+				MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
+				/* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
+				/* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
+				MX53_PAD_GPIO_13__GPIO4_3 0x1f4
+				MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
+				MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
+				MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
+				MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
+				MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
+				MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
+				MX53_PAD_EIM_OE__GPIO2_25 0x1f4
+				MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
+				MX53_PAD_EIM_RW__GPIO2_26 0x1f4
+				MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
+				MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
+				MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
+				MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
+				MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
+				MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
+				MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
+				MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
+				>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
+				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
+		};
+
+		pinctrl_ds1339: ds1339grp {
+			fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_19__ECSPI1_RDY		0x80000000
+				MX53_PAD_EIM_EB2__ECSPI1_SS0		0x80000000
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+				MX53_PAD_EIM_D19__ECSPI1_SS1		0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+				MX53_PAD_EIM_D24__GPIO3_24 0x1f0
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+				MX53_PAD_EIM_D25__GPIO3_25 0x1f0
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_gpio_key: gpio-keygrp {
+			fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+			>;
+		};
+
+		pinctrl_i2c1_gpio: i2c1-gpiogrp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__GPIO3_21		0x400001e6
+				MX53_PAD_EIM_D28__GPIO3_28		0x400001e6
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_3__I2C3_SCL		0x400001e4
+				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
+			>;
+		};
+
+		pinctrl_i2c3_gpio: i2c3-gpiogrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_3__GPIO1_3		0x400001e6
+				MX53_PAD_GPIO_6__GPIO1_6		0x400001e6
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
+				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
+				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
+				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
+				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
+				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
+				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
+				MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_1__PWM2_PWMO		0x80000000
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_ssi2: ssi2grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC	0x80000000
+				MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD	0x80000000
+				MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS	0x80000000
+				MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD	0x80000000
+				MX53_PAD_EIM_D27__GPIO3_27 0x1f0
+			>;
+		};
+
+		pinctrl_stk5led: stk5ledgrp {
+			fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1c5
+				MX53_PAD_PATA_IORDY__UART1_RTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1c5
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1c5
+				MX53_PAD_PATA_DIOR__UART2_RTS		0x1c5
+				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
+			>;
+		};
+
+		pinctrl_usbh1_vbus: usbh1-vbusgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
+			>;
+		};
+
+		pinctrl_usbotg_vbus: usbotg-vbusgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
+				MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
+			>;
+		};
+	};
+};
+
+&ipu {
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&sdma {
+	fsl,sdma-ram-script-name = "sdma-imx53.bin";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	phy_type = "utmi";
+	disable-over-current;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "peripheral";
+	disable-over-current;
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts
new file mode 100644
index 0000000000000..acc44010d5106
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts
@@ -0,0 +1,225 @@
+/*
+ * USB armory MkI device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+	model = "Inverse Path USB armory";
+	compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
+};
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user {
+			label = "LED";
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/*
+ * Not every i.MX53 P/N supports clock > 800MHz.
+ * As USB armory does not mount a specific P/N set a safe clock upper limit.
+ */
+&cpu0 {
+	operating-points = <
+		/* kHz */
+		166666  850000
+		400000  900000
+		800000 1050000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_i2c1_pmic: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL	0x80
+			MX53_PAD_EIM_D28__I2C1_SDA	0x80
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT6__GPIO4_27 0x1e4
+		>;
+	};
+
+	/*
+	 * UART mode pin header configuration
+	 * 3 - GPIO5[26], pull-down 100K
+	 * 4 - GPIO5[27], pull-down 100K
+	 * 5 - TX, pull-up 100K
+	 * 6 - RX, pull-up 100K
+	 * 7 - GPIO5[30], pull-down 100K
+	 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT8__GPIO5_26		0xc0
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0xc0
+			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT12__GPIO5_30		0xc0
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&pinctrl_i2c1_pmic>;
+	status = "okay";
+
+	ltc3589: pmic@34 {
+		compatible = "lltc,ltc3589-2";
+		reg = <0x34>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <591930>;
+				regulator-max-microvolt = <1224671>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456803>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1341250>;
+				regulator-max-microvolt = <2775000>;
+				lltc,fb-voltage-divider = <270000 100000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bb_out_reg: bb-out {
+				regulator-min-microvolt = <3387341>;
+				regulator-max-microvolt = <3387341>;
+				lltc,fb-voltage-divider = <511000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1306329>;
+				regulator-max-microvolt = <1306329>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456806>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3200000>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-voipac-bsb.dts b/arch/arm/boot/dts/nxp/imx/imx53-voipac-bsb.dts
new file mode 100644
index 0000000000000..ae53d178a6830
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-voipac-bsb.dts
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ */
+
+/dts-v1/;
+#include "imx53-voipac-dmm-668.dtsi"
+
+/ {
+	sound {
+		compatible = "fsl,imx53-voipac-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-voipac-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio>;
+
+		led1 {
+			label = "led-red";
+			gpios = <&gpio3 29 0>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "led-orange";
+			gpios = <&gpio2 31 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-voipac {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SD2_CD */
+				MX53_PAD_EIM_D25__GPIO3_25	0x80000000
+				/* SD2_WP */
+				MX53_PAD_EIM_A19__GPIO2_19 	0x80000000
+			>;
+		};
+
+		led_pin_gpio: led_gpio {
+			fsl,pins = <
+				MX53_PAD_EIM_D29__GPIO3_29	0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31	0x80000000
+			>;
+		};
+
+		/* Keyboard controller */
+		pinctrl_kpp_1: kppgrp-1 {
+			fsl,pins = <
+				MX53_PAD_GPIO_9__KPP_COL_6	0xe8
+				MX53_PAD_GPIO_4__KPP_COL_7	0xe8
+				MX53_PAD_KEY_COL2__KPP_COL_2	0xe8
+				MX53_PAD_KEY_COL3__KPP_COL_3	0xe8
+				MX53_PAD_KEY_COL4__KPP_COL_4	0xe8
+				MX53_PAD_GPIO_2__KPP_ROW_6	0xe0
+				MX53_PAD_GPIO_5__KPP_ROW_7	0xe0
+				MX53_PAD_KEY_ROW2__KPP_ROW_2	0xe0
+				MX53_PAD_KEY_ROW3__KPP_ROW_3	0xe0
+				MX53_PAD_KEY_ROW4__KPP_ROW_4	0xe0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
+				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+			>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* SSI1 */
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&clks 150>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_1>;
+	linux,keymap = <
+			0x0203003b	/* KEY_F1 */
+			0x0603003c	/* KEY_F2 */
+			0x0207003d	/* KEY_F3 */
+			0x0607003e	/* KEY_F4 */
+			>;
+	keypad,num-rows = <8>;
+	keypad,num-columns = <1>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi
new file mode 100644
index 0000000000000..24859d0c09c1c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Voipac i.MX53 X53-DMM-668";
+	compatible = "voipac,imx53-dmm-668", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 31 0>; /* PEN */
+			enable-active-high;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-voipac {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* Make DA9053 regulator functional */
+				MX53_PAD_GPIO_16__GPIO7_11	0x80000000
+				/* FEC Power enable */
+				MX53_PAD_GPIO_11__GPIO4_1	0x80000000
+				/* FEC RST */
+				MX53_PAD_GPIO_12__GPIO4_2	0x80000000
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+			>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
+		   <&gpio2 16 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053-aa", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "BUCKCORE";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "BUCKPRO";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "BUCKMEM";
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1580000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-name = "BUCKPERI";
+				regulator-min-microvolt = <2370000>;
+				regulator-max-microvolt = <2630000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "ldo1_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "ldo3_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "ldo4_2v775";
+				regulator-min-microvolt = <2770000>;
+				regulator-max-microvolt = <2780000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-name = "ldo5_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-name = "ldo6_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-name = "ldo7_2v75";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-name = "ldo8_1v8";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-name = "ldo9_1v5";
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-name = "ldo10_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53.dtsi
new file mode 100644
index 0000000000000..17dc13719639a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53.dtsi
@@ -0,0 +1,859 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx53-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		ipu0 = &ipu;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		mmc3 = &esdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&clks IMX5_CLK_ARM>;
+			clock-latency = <61036>;
+			voltage-tolerance = <5>;
+			operating-points = <
+				/* kHz */
+				 166666  850000
+				 400000  900000
+				 800000 1050000
+				1000000 1200000
+				1200000 1300000
+			>;
+		};
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu_di0>, <&ipu_di1>;
+	};
+
+	capture_subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu_csi0>, <&ipu_csi1>;
+	};
+
+	tzic: tz-interrupt-controller@fffc000 {
+		compatible = "fsl,imx53-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x0fffc000 0x4000>;
+	};
+
+	clocks {
+		ckil {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&tzic>;
+		interrupts = <77>;
+	};
+
+	usbphy0: usbphy-0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	usbphy1: usbphy-1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&tzic>;
+		ranges;
+
+		sata: sata@10000000 {
+			compatible = "fsl,imx53-ahci";
+			reg = <0x10000000 0x1000>;
+			interrupts = <28>;
+			clocks = <&clks IMX5_CLK_SATA_GATE>,
+				 <&clks IMX5_CLK_SATA_REF>,
+				 <&clks IMX5_CLK_AHB>;
+			clock-names = "sata", "sata_ref", "ahb";
+			status = "disabled";
+		};
+
+		ipu: ipu@18000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx53-ipu";
+			reg = <0x18000000 0x08000000>;
+			interrupts = <11 10>;
+			clocks = <&clks IMX5_CLK_IPU_GATE>,
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 2>;
+
+			ipu_csi0: port@0 {
+				reg = <0>;
+
+				ipu_csi0_from_parallel_sensor: endpoint {
+				};
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+
+				ipu_csi1_from_parallel_sensor: endpoint {
+				};
+			};
+
+			ipu_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di0_lvds0: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds0_in>;
+				};
+			};
+
+			ipu_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu_di1_disp1: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di1_lvds1: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds1_in>;
+				};
+
+				ipu_di1_tve: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&tve_in>;
+				};
+			};
+		};
+
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.0", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
+		aips1: bus@50000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x10000000>;
+			ranges;
+
+			spba-bus@50000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x50000000 0x40000>;
+				ranges;
+
+				esdhc1: mmc@50004000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50004000 0x4000>;
+					interrupts = <1>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc2: mmc@50008000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50008000 0x4000>;
+					interrupts = <2>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				uart3: serial@5000c000 {
+					compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+					reg = <0x5000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi1: spi@50010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+					reg = <0x50010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@50014000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx53-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+					reg = <0x50014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+						 <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				esdhc3: mmc@50020000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50020000 0x4000>;
+					interrupts = <3>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc4: mmc@50024000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50024000 0x4000>;
+					interrupts = <4>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+			};
+
+			aipstz1: bridge@53f00000 {
+				compatible = "fsl,imx53-aipstz";
+				reg = <0x53f00000 0x60>;
+			};
+
+			usbotg: usb@53f80000 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@53f80200 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80200 0x0200>;
+				interrupts = <14>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh2: usb@53f80400 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80400 0x0200>;
+				interrupts = <16>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh3: usb@53f80600 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80600 0x0200>;
+				interrupts = <17>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53f80800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx53-usbmisc";
+				reg = <0x53f80800 0x200>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+			};
+
+			gpio1: gpio@53f84000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <50 51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53f88000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f88000 0x4000>;
+				interrupts = <52 53>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@53f8c000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f8c000 0x4000>;
+				interrupts = <54 55>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@53f90000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <56 57>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@53f94000 {
+				compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
+				reg = <0x53f94000 0x4000>;
+				interrupts = <60>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@53f98000 {
+				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+			};
+
+			wdog2: watchdog@53f9c000 {
+				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+				reg = <0x53f9c000 0x4000>;
+				interrupts = <59>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			gpt: timer@53fa0000 {
+				compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
+				reg = <0x53fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			srtc: rtc@53fa4000 {
+				compatible = "fsl,imx53-rtc";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks IMX5_CLK_SRTC_GATE>;
+			};
+
+			iomuxc: iomuxc@53fa8000 {
+				compatible = "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@53fa8000 {
+				compatible = "fsl,imx53-iomuxc-gpr", "syscon";
+				reg = <0x53fa8000 0xc>;
+			};
+
+			ldb: ldb@53fa8008 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-ldb";
+				reg = <0x53fa8008 0x4>;
+				gpr = <&gpr>;
+				clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+					 <&clks IMX5_CLK_LDB_DI1_SEL>,
+					 <&clks IMX5_CLK_IPU_DI0_SEL>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>,
+					 <&clks IMX5_CLK_LDB_DI0_GATE>,
+					 <&clks IMX5_CLK_LDB_DI1_GATE>;
+				clock-names = "di0_pll", "di1_pll",
+					      "di0_sel", "di1_sel",
+					      "di0", "di1";
+				status = "disabled";
+
+				lvds-channel@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					status = "disabled";
+
+					port@0 {
+						reg = <0>;
+
+						lvds0_in: endpoint {
+							remote-endpoint = <&ipu_di0_lvds0>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+					};
+				};
+
+				lvds-channel@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					status = "disabled";
+
+					port@1 {
+						reg = <1>;
+
+						lvds1_in: endpoint {
+							remote-endpoint = <&ipu_di1_lvds1>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+					};
+				};
+			};
+
+			pwm1: pwm@53fb4000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb4000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@53fb8000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb8000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@53fbc000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@53fc0000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			can1: can@53fc8000 {
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fc8000 0x4000>;
+				interrupts = <82>;
+				clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
+					 <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: can@53fcc000 {
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <83>;
+				clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
+					 <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			src: reset-controller@53fd0000 {
+				compatible = "fsl,imx53-src", "fsl,imx51-src";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <75>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@53fd4000{
+				compatible = "fsl,imx53-ccm";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+
+			gpio5: gpio@53fdc000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fdc000 0x4000>;
+				interrupts = <103 104>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@53fe0000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <105 106>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@53fe4000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe4000 0x4000>;
+				interrupts = <107 108>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			i2c3: i2c@53fec000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				reg = <0x53fec000 0x4000>;
+				interrupts = <64>;
+				clocks = <&clks IMX5_CLK_I2C3_GATE>;
+				status = "disabled";
+			};
+
+			uart4: serial@53ff0000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+					 <&clks IMX5_CLK_UART4_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+		};
+
+		aips2: bus@60000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x60000000 0x10000000>;
+			ranges;
+
+			aipstz2: bridge@63f00000 {
+				compatible = "fsl,imx53-aipstz";
+				reg = <0x63f00000 0x60>;
+			};
+
+			iim: efuse@63f98000 {
+				compatible = "fsl,imx53-iim", "fsl,imx27-iim", "syscon";
+				reg = <0x63f98000 0x4000>;
+				interrupts = <69>;
+				clocks = <&clks IMX5_CLK_IIM_GATE>;
+			};
+
+			uart5: serial@63f90000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x63f90000 0x4000>;
+				interrupts = <86>;
+				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+					 <&clks IMX5_CLK_UART5_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			tigerp: tigerp@63fa0000 {
+				compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp";
+				reg = <0x63fa0000 0x28>;
+			};
+
+			owire: owire@63fa4000 {
+				compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+				reg = <0x63fa4000 0x4000>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+				status = "disabled";
+			};
+
+			ecspi2: spi@63fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+				reg = <0x63fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@63fb0000 {
+				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
+				reg = <0x63fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+					 <&clks IMX5_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+			};
+
+			cspi: spi@63fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
+				reg = <0x63fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@63fc4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc4000 0x4000>;
+				interrupts = <63>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@63fc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc8000 0x4000>;
+				interrupts = <62>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@63fcc000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+						"fsl,imx21-ssi";
+				reg = <0x63fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			audmux: audmux@63fd0000 {
+				compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
+				reg = <0x63fd0000 0x4000>;
+				status = "disabled";
+			};
+
+			nfc: nand@63fdb000 {
+				compatible = "fsl,imx53-nand";
+				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
+				interrupts = <8>;
+				clocks = <&clks IMX5_CLK_NFC_GATE>;
+				status = "disabled";
+			};
+
+			ssi3: ssi@63fe8000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+						"fsl,imx21-ssi";
+				reg = <0x63fe8000 0x4000>;
+				interrupts = <96>;
+				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 46 0 0>,
+				       <&sdma 47 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			fec: ethernet@63fec000 {
+				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+				reg = <0x63fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			tve: tve@63ff0000 {
+				compatible = "fsl,imx53-tve";
+				reg = <0x63ff0000 0x1000>;
+				interrupts = <92>;
+				clocks = <&clks IMX5_CLK_TVE_GATE>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>;
+				clock-names = "tve", "di_sel";
+				status = "disabled";
+
+				port {
+					tve_in: endpoint {
+						remote-endpoint = <&ipu_di1_tve>;
+					};
+				};
+			};
+
+			vpu: vpu@63ff4000 {
+				compatible = "fsl,imx53-vpu", "cnm,coda7541";
+				reg = <0x63ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
+					 <&clks IMX5_CLK_VPU_GATE>;
+				clock-names = "per", "ahb";
+				resets = <&src 1>;
+				iram = <&ocram>;
+			};
+
+			sahara: crypto@63ff8000 {
+				compatible = "fsl,imx53-sahara";
+				reg = <0x63ff8000 0x4000>;
+				interrupts = <19 20>;
+				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+				clock-names = "ipg", "ahb";
+			};
+		};
+
+		ocram: sram@f8000000 {
+			compatible = "mmio-sram";
+			reg = <0xf8000000 0x20000>;
+			ranges = <0 0xf8000000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX5_CLK_OCRAM>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-baseboard.dtsi
new file mode 100644
index 0000000000000..d477a937b47a8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-baseboard.dtsi
@@ -0,0 +1,561 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+/ {
+	keyboard {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>;
+			label = "btn0";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>;
+			label = "btn1";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>;
+			label = "btn2";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>;
+			label = "btn3";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		gen-led0 {
+			label = "led0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led0>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+		};
+
+		gen-led1 {
+			label = "led1";
+			gpios = <&pcf8575 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		gen-led2 {
+			label = "led2";
+			gpios = <&pcf8575 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		gen-led3 {
+			label = "led3";
+			gpios = <&pcf8575 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_otg>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_3v3: regulator-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_3v3>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_enet: regulator-ethernet {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_enet>;
+		compatible = "regulator-fixed";
+		regulator-name = "ethernet-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&sw4_reg>;
+	};
+
+	reg_audio: regulator-audio {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_audio>;
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_hdmi: regulator-hdmi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_hdmi>;
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_uart3: regulator-uart3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_uart3>;
+		compatible = "regulator-fixed";
+		regulator-name = "uart3-supply";
+		gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_1v8>;
+		compatible = "regulator-fixed";
+		regulator-name = "1v8-supply";
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_pcie>;
+		regulator-name = "mpcie_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mipi: regulator-mipi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_mipi>;
+		regulator-name = "mipi_pwr_en";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&wm8962>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_enet>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+};
+
+&i2c3 {
+	ov5640: camera@10 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x10>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_mipi>;
+		AVDD-supply = <&reg_mipi>;
+		DVDD-supply = <&reg_mipi>;
+		reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	pcf8575: gpio@20 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcf8574>;
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		lines-initial-states = <0x0710>;
+		wakeup-source;
+	};
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&reg_3v3>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0	/* ENET_INT */
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x1b0b0	/* ETHR_nRST */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_led0: led0grp {
+	    fsl,pins = <
+		MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+	    >;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26	0x1b0b1
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x1b0b1
+		>;
+	};
+
+	pinctrl_pcf8574: pcf8575grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+	    fsl,pins = <
+		MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+	    >;
+	};
+
+	pinctrl_reg_1v8: reg1v8grp {
+	    fsl,pins = <
+		MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
+	    >;
+	};
+
+	pinctrl_reg_3v3: reg3v3grp {
+	    fsl,pins = <
+		MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b0
+	    >;
+	};
+
+	pinctrl_reg_audio: reg-audiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_enet: reg-enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_hdmi: reg-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_mipi: reg-mipigrp {
+		fsl,pins = <MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b1>;
+	};
+
+	pinctrl_reg_pcie: reg-pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
+			>;
+	};
+
+	pinctrl_reg_uart3: reguart3grp {
+	    fsl,pins = <
+		MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+	    >;
+	};
+
+	pinctrl_reg_usb_h1_vbus: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_usb_otg: reg-usb-otggrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0xd17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17069
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10069
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17069
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17069
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17069
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17069
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: h100-usdhc2-100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: h100-usdhc2-200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6-logicpd-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-som.dtsi
new file mode 100644
index 0000000000000..547fb141ec0c9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-som.dtsi
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1837";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddcore";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddsoc";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_3v3";
+				regulator-boot-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "sw3a_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "sw3b_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_rgmii";
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-name = "gen_5v0";
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "gen_vsns";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "gen_1v5";
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-name = "vgen2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-name = "gen_vadj_0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-name = "gen_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-name = "gen_vadj_1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-name = "gen_2v5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			coin_reg: coin {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp102";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tempsense>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x51>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+/* Reroute power feeding the CPU to come from the external PMIC */
+&reg_arm
+{
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc
+{
+	vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_gpmi_nand: gpmi-nandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0x0b0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0x0b0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0x0b0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0x0b0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0x0b0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0x0b0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0x0b0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0x0b0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0x0b0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0x0b0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0x0b0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0x0b0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0x0b0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <	/* Enable ARM Debugger */
+			MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15	0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1        0x130b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_tempsense: tempsensegrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x13059	/* BT_EN */
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170B9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100B9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170B9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170B9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170B9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170B9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17049
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10049
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x130b0 /* WL_IRQ */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x17059 /* WLAN_EN */
+		>;
+	};
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		  compatible = "ti,wl1837";
+		  reg = <2>;
+		  interrupt-parent = <&gpio7>;
+		  interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		  tcxo-clock-frequency = <26000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
new file mode 100644
index 0000000000000..4989e8d069a1c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
@@ -0,0 +1,578 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Altesco I6P Board";
+	compatible = "alt,alti6p", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	clock_ksz8081: clock-ksz8081 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	i2c2-mux {
+		compatible = "i2c-mux";
+		i2c-parent = <&i2c2>;
+		mux-controls = <&i2c_mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c4-mux {
+		compatible = "i2c-mux";
+		i2c-parent = <&i2c4>;
+		mux-controls = <&i2c_mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-debug1 {
+			function = LED_FUNCTION_SD;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	i2c_mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2cmux>;
+
+		mux-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>,
+			    <&gpio5 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_h1_vbus: regulator-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_5v0>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&clock_ksz8081>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "SD1_CD", "", "USB_H1_OC", "", "", "", "",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "ECSPI1_SS1", "", "USB_EXT1_OC", "USB_EXT1_PWR", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "ETH_RESET", "", "", "BUZZER", "ETH_INTRP", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "I2C_EN13", "I2C_EN24", "", "", "", "",
+		"", "", "", "", "", "AUDIO_RESET", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c1>;
+	status = "okay";
+};
+
+/* DDC */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+
+	/* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c2 {
+	clock-frequency = <50000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	/* external interface, device are configured from user space */
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <50000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "ac97-slave";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x1b000
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x3008
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x3008
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x3008
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			/* NOTE: DDC is done via I2C2, so DON'T configure DDC
+			 * pins for HDMI!
+			 */
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE		0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL			0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA			0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__I2C4_SDA			0x4001f8b1
+			MX6QDL_PAD_NANDF_WP_B__I2C4_SCL			0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2cmux: i2cmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09			0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x8
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__USB_H1_OC			0x1B058
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1B058
+
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-apf6dev.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-apf6dev.dts
new file mode 100644
index 0000000000000..3dcce3454b081
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-apf6dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-apf6.dtsi"
+#include "imx6qdl-apf6dev.dtsi"
+
+/ {
+	model = "Armadeus APF6 Solo Module on APF6Dev Board";
+	compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
new file mode 100644
index 0000000000000..dfa6f64d43cce
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
@@ -0,0 +1,158 @@
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos2.dtsi"
+
+/ {
+	model = "aristainetos2 i.MX6 Dual Lite Board 4";
+	compatible = "abb,aristainetos2-imx6dl-4", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	display0: disp0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp>;
+
+		port@0 {
+			reg = <0>;
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	lcd_panel: display@0 {
+		compatible = "lg,lg4573";
+		spi-max-frequency = <10000000>;
+		reg = <0>;
+		power-on-delay = <10>;
+
+		display-timings {
+			480x800p57 {
+				native-mode;
+				clock-frequency = <27000027>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <10>;
+				hback-porch = <59>;
+				hsync-len = <10>;
+				vback-porch = <15>;
+				vfront-porch = <15>;
+				vsync-len = <15>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touch: touch@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 8>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_ipu_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0xE1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0xE1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0xE1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0xE1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0xE1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0xE1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0xE1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0xE1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0xE1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0xE1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0xE1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0xE1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0xE1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0xE1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0xE1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0xe1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0xE1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0xE1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0xE1
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0xE1
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0xE1
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0xE1
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0xE1
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0xE1
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0xE1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
new file mode 100644
index 0000000000000..5e15212eaf3ad
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
@@ -0,0 +1,98 @@
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos2.dtsi"
+
+/ {
+	model = "aristainetos2 i.MX6 Dual Lite Board 7";
+	compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	panel: panel {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touch: touch@4d {
+		compatible = "atmel,maxtouch";
+		reg = <0x4d>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 8>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+			lvds0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_lvds0>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts
new file mode 100644
index 0000000000000..cc861a43eb580
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos.dtsi"
+
+/ {
+	model = "aristainetos i.MX6 Dual Lite Board 4";
+	compatible = "abb,aristainetos-imx6dl-4", "fsl,imx6dl";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		status = "okay";
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	display0: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp>;
+		status = "okay";
+
+		display-timings {
+			480x800p60 {
+				native-mode;
+				clock-frequency = <30000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <59>;
+				hback-porch = <10>;
+				hsync-len = <10>;
+				vback-porch = <15>;
+				vfront-porch = <15>;
+				vsync-len = <15>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts
new file mode 100644
index 0000000000000..b6cb78870cd54
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos.dtsi"
+
+/ {
+	model = "aristainetos i.MX6 Dual Lite Board 7";
+	compatible = "abb,aristainetos-imx6dl-7", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	display0: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp>;
+		status = "okay";
+
+		display-timings {
+			800x480p60 {
+				native-mode;
+				clock-frequency = <33246000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <88>;
+				hback-porch = <88>;
+				hsync-len = <80>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				vsync-len = <25>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 3000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
new file mode 100644
index 0000000000000..411aa72d344b8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B105Pv2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5pv2.dtsi"
+
+/ {
+	model = "General Electric B105Pv2";
+	compatible = "ge,imx6dl-b105pv2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g101evn010";
+	};
+};
+
+&i2c3 {
+	touchscreen@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
new file mode 100644
index 0000000000000..d011127c635b5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B105v2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5v2.dtsi"
+
+/ {
+	model = "General Electric B105v2";
+	compatible = "ge,imx6dl-b105v2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g101evn010";
+	};
+};
+
+&i2c3 {
+	touchscreen@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
new file mode 100644
index 0000000000000..ca840fa84052e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B125Pv2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5pv2.dtsi"
+
+/ {
+	model = "General Electric B125Pv2";
+	compatible = "ge,imx6dl-b125pv2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g121ean01";
+	};
+};
+
+&i2c3 {
+	touchscreen@2a {
+		compatible = "eeti,exc80h60";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
new file mode 100644
index 0000000000000..81e5a9cb89006
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B125v2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5v2.dtsi"
+
+/ {
+	model = "General Electric B125v2";
+	compatible = "ge,imx6dl-b125v2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g121ean01";
+	};
+};
+
+&i2c3 {
+	touchscreen@2a {
+		compatible = "eeti,exc80h60";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
new file mode 100644
index 0000000000000..c861937b30f6a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B155v2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5v2.dtsi"
+
+/ {
+	model = "General Electric B155v2";
+	compatible = "ge,imx6dl-b155v2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g156xtn01";
+	};
+};
+
+&i2c3 {
+	touchscreen@2a {
+		compatible = "eeti,exc80h84";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5pv2.dtsi
new file mode 100644
index 0000000000000..37697fac9dea9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5pv2.dtsi
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B1x5Pv2
+// patient monitor series
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+#include <dt-bindings/input/input.h>
+#include "imx6dl-qmx6.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	/* Do not allow frequencies above 800MHz */
+	cpus {
+		cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz	SOC-PU uV */
+				792000	1175000
+				396000	1175000
+			>;
+		};
+
+		cpu@1 {
+			operating-points = <
+				/* kHz    uV */
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz	SOC-PU uV */
+				792000	1175000
+				396000	1175000
+			>;
+		};
+	};
+
+	reg_syspwr: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "SYS_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	reg_5v_pmc: regulator-5v-pmc {
+		compatible = "regulator-fixed";
+		regulator-name = "5V PMC";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_syspwr>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_syspwr>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_syspwr>;
+	};
+
+	reg_5v0_audio: regulator-5v0-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "5V0_AUDIO";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v>;
+		gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * This must be always-on for da7212, which has some not
+		 * properly documented dependencies for it's speaker supply
+		 * pin. The issue manifests as speaker volume being very low.
+		 */
+		regulator-always-on;
+	};
+
+
+	reg_3v3_audio: regulator-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_3v3>;
+		pinctrl-0 = <&pinctrl_q7_hda_reset>;
+		pinctrl-names = "default";
+		gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_2v5_audio: regulator-2v5-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5_AUDIO";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&reg_3v3_audio>;
+
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "WLAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_3v3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_sdio_power>;
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <70000>;
+	};
+
+	reg_bl: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "LED_VCC";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_syspwr>;
+		pinctrl-0 = <&pinctrl_q7_lcd_power>;
+		pinctrl-names = "default";
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v>;
+	};
+
+	usb_power: regulator-usb-power {
+		compatible = "regulator-fixed";
+		regulator-name = "USB POWER";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v>;
+	};
+
+	charger: battery-charger {
+		compatible = "gpio-charger"; /* ti,bq24172 */
+		charger-type = "mains";
+		gpios = <&tca6424a 3 GPIO_ACTIVE_LOW>;
+		charge-current-limit-gpios = <&tca6424a 11 GPIO_ACTIVE_HIGH>,
+					     <&tca6424a 12 GPIO_ACTIVE_HIGH>;
+		charge-current-limit-mapping = <1300000 0x0>,
+					       <700000 0x1>,
+					       <0 0x2>;
+		charge-status-gpios = <&tca6424a 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_spi_cs1>;
+		gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+	};
+
+	power-button-key {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_sleep_button>;
+
+		power-button {
+			label = "power button";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	rotary-encoder-key {
+		compatible = "gpio-keys";
+
+		rotary-encoder-event {
+			label = "rotary-encoder press";
+			gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_ENTER>;
+			linux,can-disable;
+		};
+	};
+
+	rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio2 &pinctrl_q7_gpio4>;
+		gpios = <&gpio4 26 GPIO_ACTIVE_LOW>, <&gpio1 0 GPIO_ACTIVE_LOW>;
+		rotary-encoder,relative-axis;
+		rotary-encoder,steps-per-period = <2>;
+		wakeup-source;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
+
+		led-alarm1 {
+			label = "alarm:red";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-alarm2 {
+			label = "alarm:yellow";
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-alarm3 {
+			label = "alarm:blue";
+			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_backlight_enable>;
+		power-supply = <&reg_bl>;
+		pwms = <&pwm4 0 5000000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <179>;
+		enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel {
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets = "Speaker", "Ext Spk";
+		simple-audio-card,audio-routing = "Ext Spk", "LINE";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	battery: battery@b {
+		compatible = "ti,bq20z65", "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,battery-detect-gpios = <&tca6424a 5 GPIO_ACTIVE_LOW>;
+		sbs,i2c-retry-count = <5>;
+		power-supplies = <&charger>;
+	};
+
+	codec: audio-codec@1a {
+		compatible = "dlg,da7212";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5_audio>;
+		VDDSP-supply = <&reg_5v0_audio>;
+		VDDMIC-supply = <&reg_3v3_audio>;
+		VDDIO-supply = <&reg_3v3_audio>;
+		clocks = <&clk_ext_audio_codec>;
+		clock-names = "mclk";
+	};
+};
+
+&i2c5 {
+	tca6424a: gpio-controller@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio6>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "GPIO_ROTOR#", "ACM_IO_INT", "TMP_SENSOR_IRQ", "AC_IN",
+				  "TF_S", "BATT_T", "LED_INC_CHAR", "ACM1_OCF",
+				  "ACM2_OCF", "ACM_IO_RST", "USB1_POWER_EN", "EGPIO_CC_CTL0",
+				  "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "",
+				  "SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL",
+				  "MARKER_EN", "EGPIO_TOUCH_RST", "PRESSURE_INT1", "PRESSURE_INT2";
+
+	};
+
+	tmp75: temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+		vs-supply = <&reg_3v3>;
+		interrupt-parent = <&tca6424a>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&usb_power>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+
+	/*
+	 * TPS2051BDGN fault-gpio is connected to Q7[86] USB_0_1_OC_N.
+	 * On QMX6 this is not connceted to the i.MX6, but to the USB Hub
+	 * from &usbh1. This means, that we cannot easily detect and handle
+	 * over-current events. Fortunately the regulator limits the current
+	 * automatically, so the hardware is still protected.
+	 */
+};
+
+&usdhc4 {
+	/* WiFi module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	vmmc-supply = <&reg_wlan>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio7>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+
+		tcxo-clock-frequency = <26000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi
new file mode 100644
index 0000000000000..f028b6a191df5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B1x5v2
+// patient monitor series
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+#include <dt-bindings/input/input.h>
+#include "imx6dl-b1x5pv2.dtsi"
+
+/ {
+	reg_3v3_acm: regulator-3v3-acm {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3 ACM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+};
+
+&i2c1 {
+	tca6416: gpio-controller@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		reset-gpios = <&tca6424a 9 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_3v3_acm>;
+		gpio-line-names = "ACM1_EN", "ACM1_CL0", "ACM1_CL1", "ACM1_CL2",
+				  "", "ACM2_EN", "ACM2_CL0", "ACM2_CL1",
+				  "ACM2_CL2", "", "", "",
+				  "", "", "", "";
+
+		/*
+		 * The interrupt pin is connected to &tca6424a pin 1, but the Linux
+		 * TCA6424 driver cannot handle low type interrupts at the moment
+		 * (and support cannot be added without some ugly hacks). Since this
+		 * controller does not have any input type GPIOs, just pretend
+		 * that the interrupt pin is unconnected.
+		 */
+	};
+};
+
+&i2c5 {
+	mpl3115a2: pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+
+		/*
+		 * The MPL3115 interrupts are connected to pin 22 and 23
+		 * of &tca6424a, but the binding does not yet support
+		 * interrupts.
+		 */
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-aster.dts
new file mode 100644
index 0000000000000..82a0d1a28d12f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-aster.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Aster Board";
+	compatible = "toradex,colibri_imx6dl-aster", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	cs-gpios = <
+		&gpio5 2 GPIO_ACTIVE_HIGH
+		&gpio5 4 GPIO_ACTIVE_HIGH
+	>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4 &pinctrl_csi_gpio_2>;
+	status = "okay";
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_csi_gpio_1
+		&pinctrl_gpio_2
+		&pinctrl_gpio_aster
+		&pinctrl_usbh_oc_1
+		&pinctrl_usbc_id_1
+		&pinctrl_weim_gpio_5
+	>;
+
+	pinctrl_gpio_aster: gpioaster {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08		0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b0b0
+		>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-eval-v3.dts
new file mode 100644
index 0000000000000..f50a26dd34c03
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-eval-v3.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Fixed crystal dedicated to mcp251x */
+	clk16m: clock-16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "clk16m";
+	};
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	status = "okay";
+
+	mcp251x0: mcp251x@0 {
+		compatible = "microchip,mcp2515";
+		clocks = <&clk16m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 0x2>;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		status = "okay";
+	};
+};
+
+/*
+ * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_weim_gpio_1 &pinctrl_weim_gpio_2
+		&pinctrl_weim_gpio_3 &pinctrl_weim_gpio_4
+		&pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6
+		&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1
+	>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	/* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */
+	ranges = <0 0 0x08000000 0x02000000
+		  1 0 0x0a000000 0x02000000
+		  2 0 0x0c000000 0x02000000
+		  3 0 0x0e000000 0x02000000>;
+
+	/* SRAM on Colibri nEXT_CS0 */
+	sram@0,0 {
+		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
+		reg = <0 0 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+				      0x00000000 0x04000040 0x00000000>;
+	};
+
+	/* SRAM on Colibri nEXT_CS1 */
+	sram@1,0 {
+		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
+		reg = <1 0 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+				      0x00000000 0x04000040 0x00000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris-v2.dts
new file mode 100644
index 0000000000000..3a6d3889760d6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris-v2.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-iris.dts"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Iris V2 Board";
+	compatible = "toradex,colibri_imx6dl-iris-v2", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		regulator-name = "3v3_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_iris	&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1>;
+
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
+		>;
+	};
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	cap-power-off-card;
+	/* uncomment the following to enable SD card UHS mode if you have a V1.1 module */
+	/* /delete-property/ no-1-8-v; */
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris.dts
new file mode 100644
index 0000000000000..4303c88bb2a91
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris.dts
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Iris Board";
+	compatible = "toradex,colibri_imx6dl-iris", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	status = "okay";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_forceoff &pinctrl_uart23_forceoff>;
+
+	/*
+	 * uart-a-on-x13-enable turns the UART transceiver for UART_A on. If one
+	 * wants to turn the transceiver off, that property has to be deleted
+	 * and the gpio handled in userspace.
+	 * The same applies to uart-b-c-on-x14-enable where the UART_B and
+	 * UART_C transceiver is turned on.
+	 */
+	uart-a-on-x13-enable-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+		output-high;
+	};
+
+	uart-b-c-on-x14-enable-hog {
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+		output-high;
+	};
+};
+
+/*
+ * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	status = "okay";
+
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_gpio_iris
+		&pinctrl_usbh_oc_1
+		&pinctrl_usbc_id_1
+	>;
+
+	pinctrl_gpio_iris: gpioirisgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21	0x1b0b0
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20	0x1b0b0
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19	0x1b0b0
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18	0x1b0b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06	0x1b0b0
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03	0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_forceoff: uart1forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart23_forceoff: uart23forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+		>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-emmc-som-v15.dts
new file mode 100644
index 0000000000000..2b2fc360b8653
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-emmc-som-v15.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-som-v15.dts
new file mode 100644
index 0000000000000..e09c565d1d1fe
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-som-v15.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Solo/DualLite (1.5som)";
+	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i.dts
new file mode 100644
index 0000000000000..2b1b3e193f53c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Solo/DualLite";
+	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-dfi-fs700-m60.dts
new file mode 100644
index 0000000000000..cece4aafdad87
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-dfi-fs700-m60.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
+ */
+
+#ifndef __DTS_V1__
+#define __DTS_V1__
+/dts-v1/;
+#endif
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dfi-fs700-m60.dtsi"
+
+/ {
+	model = "DFI FS700-M60-6DL i.MX6dl Q7 Board";
+	compatible = "dfi,fs700-m60-6dl", "dfi,fs700e-m60", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-picoitx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-picoitx.dts
new file mode 100644
index 0000000000000..038bb00255567
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-picoitx.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6DL-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCOM PCB number: 493-300 or newer
+ * PicoITX PCB number: 487-600 or newer
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-picoitx.dtsi"
+
+/ {
+	model = "DH electronics i.MX6DL DHCOM on PicoITX";
+	compatible = "dh,imx6dl-dhcom-picoitx", "dh,imx6dl-dhcom-som",
+		     "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts
new file mode 100644
index 0000000000000..33825b5a8f26c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Eckelmann AG.
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Eckelmann CI 4X10 Board";
+	compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	rmii_clk: clock-rmii {
+		/* This clock is provided by the phy (KSZ8091RNB) */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	siox {
+		compatible = "eckelmann,siox-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_siox>;
+		din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+		dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&rmii_clk>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&rmii_clk>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "everspin,mr25h256";
+		reg = <0>;
+		spi-max-frequency = <15000000>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&gpio2 {
+	gpio-line-names = "buzzer", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "", "", "", "", "in2",
+			  "prio2", "prio1", "aux", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "in1",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	temperature-sensor@49 {
+		compatible = "ad,ad7414";
+		reg = <0x49>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf2127";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hog {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x00000018 /* buzzer */
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x00000018 /* OUT_1 */
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x00000018 /* OUT_2 */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x00000018 /* OUT_3 */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x00000000 /* In1 */
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x00000000 /* In2 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x00000018 /* unused watchdog pin */
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19		0x00000018 /* unused watchdog pin */
+
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 	0x000100a0
+			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI	0x000100a0
+			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO	0x000100a0
+			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25	0x000100a0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x000100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x000100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x000100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x0001b098
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x0001b098
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x0001b098
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x0001b098
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x0001b098
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x0001b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x0001b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x0001b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x0001b0b0
+			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0x00000018
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x0001b020
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x0001b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x0001b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			/* without SION i2c doesn't detect bus busy */
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b820
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b820
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x00000018
+		>;
+	};
+
+	pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x0001b0b0
+		>;
+	};
+
+	pinctrl_siox: sioxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x0001b010	/* DIN */
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x0001b010	/* DOUT */
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0001b010	/* DCLK */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x0001b010	/* DLD */
+		>;
+	};
+
+	pinctrl_uart1_dte: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA	0x0001b010
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B 	0x0001b010
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 	0x0001b010
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x0001b010	/* DCD */
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x0001b010	/* DTR */
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x0001b010	/* DSR */
+		>;
+	};
+
+	pinctrl_uart2_dte: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x0001b010
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x0001b010
+			MX6QDL_PAD_EIM_D28__UART2_RTS_B 	0x0001b010
+			MX6QDL_PAD_EIM_D29__UART2_CTS_B 	0x0001b010
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x0001b010	/* DCD */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x0001b010	/* DTR */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x0001b010	/* DSR */
+		>;
+	};
+
+	pinctrl_uart3_dce: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA	0x0001b010
+			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA	0x0001b010
+		>;
+	};
+
+	pinctrl_uart4_dce: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x0001b010
+		>;
+	};
+
+	pinctrl_uart5_dce: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x0001b010	/* RTS */
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC		0x0001b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x00017059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x00010059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x00017059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x00017059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x00017059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x00017059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x00017059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x00017059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x00017059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x00017059
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_dce>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_dce>;
+	rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_dce>;
+	rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dts
new file mode 100644
index 0000000000000..407ad8d43c848
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-emcon.dtsi"
+#include "imx6qdl-emcon-avari.dtsi"
+
+/ {
+	model = "emtrion SoM emCON-MX6 Solo/Dual-Lite Avari";
+	compatible = "emtrion,emcon-mx6-avari", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dts
new file mode 100644
index 0000000000000..9956d12a1245c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW51XX";
+	compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts
new file mode 100644
index 0000000000000..9ea23dd54f3ce
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX";
+	compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi1_mux: endpoint {
+				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi1: ipu1_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts
new file mode 100644
index 0000000000000..182e8194c2490
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
+	compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi1_mux: endpoint {
+				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi1: ipu1_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts
new file mode 100644
index 0000000000000..a106c4e3e3299
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX";
+	compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi1_mux: endpoint {
+				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi1: ipu1_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts
new file mode 100644
index 0000000000000..82d5f85722eaf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X";
+	compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw552x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw552x.dts
new file mode 100644
index 0000000000000..4864a36f9b364
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw552x.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2014 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw552x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW552X";
+	compatible = "gw,imx6dl-gw552x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts
new file mode 100644
index 0000000000000..59b8afc36e66c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
+	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts
new file mode 100644
index 0000000000000..21bdfaf8df53d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X";
+	compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts
new file mode 100644
index 0000000000000..103261ea93343
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Duallite/Solo GW5903";
+	compatible = "gw,imx6dl-gw5903", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts
new file mode 100644
index 0000000000000..9c6d3cd3d6a76
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904";
+	compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5907.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5907.dts
new file mode 100644
index 0000000000000..3fa2822beffc8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907";
+	compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5910.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5910.dts
new file mode 100644
index 0000000000000..0d5e7e5da536d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910";
+	compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5912.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5912.dts
new file mode 100644
index 0000000000000..5260e0142d63a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912";
+	compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5913.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5913.dts
new file mode 100644
index 0000000000000..b74e533c8e679
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913";
+	compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-emmc-som-v15.dts
new file mode 100644
index 0000000000000..a63f742f20d99
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-emmc-som-v15.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-som-v15.dts
new file mode 100644
index 0000000000000..66a06cf3cdf3f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-som-v15.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Solo/DualLite (1.5som)";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard.dts
new file mode 100644
index 0000000000000..cbd02eb486e16
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Solo/DualLite";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-emmc-som-v15.dts
new file mode 100644
index 0000000000000..80313c13bcdbf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-emmc-som-v15.dts
@@ -0,0 +1,55 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-som-v15.dts
new file mode 100644
index 0000000000000..e61ef1156f8b5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-som-v15.dts
@@ -0,0 +1,54 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Solo/DualLite (1.5som)";
+	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2.dts
new file mode 100644
index 0000000000000..b12cd87f3f948
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-hummingboard2-emmc.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Solo/DualLite";
+	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-icore-mipi.dts
new file mode 100644
index 0000000000000..d8f3821a0ffdc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-icore-mipi.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2018 Engicam S.r.l.
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-icore-rqs.dts
new file mode 100644
index 0000000000000..73d710d34b9d5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-icore-rqs.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-icore.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-icore.dts
new file mode 100644
index 0000000000000..80fa60607ab16
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-icore.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c1 {
+	max11801: touchscreen@48 {
+		compatible = "maxim,max11801";
+		reg = <0x48>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi
new file mode 100644
index 0000000000000..a864fdbd5f16a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+
+/ {
+	model = "Kontron SMARC sAMX6i Dual-Lite/Solo";
+	compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts
new file mode 100644
index 0000000000000..7c62db91173b7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts
@@ -0,0 +1,483 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2019 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Van der Laan LANMCU";
+	compatible = "vdl,lanmcu", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	clock_ksz8081: clock-ksz8081 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 1000>;
+		num-interpolated-steps = <20>;
+		default-brightness-level = <19>;
+	};
+
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-0 = <&pinctrl_ipu1_disp>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			label = "debug0";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0bdh6";
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+	};
+
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&clock_ksz8081>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "SD1_CD", "", "", "", "", "", "",
+		"DEBUG_0", "BL_PWM", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "ENET_LED_GREEN",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "TS_INT", "USB_OTG1_OC", "USB_OTG1_PWR", "",
+		"", "", "", "", "UART2_CTS", "", "UART3_CTS", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "ENET_RST", "ENET_INT",
+		"", "", "I2C1_SDA", "I2C1_SCL", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "WLAN_REG_ON", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"EMMC_RST", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	/* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts_edt>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <1792>;
+		touchscreen-size-y = <1024>;
+
+		touchscreen-fuzz-x = <0>;
+		touchscreen-fuzz-y = <0>;
+
+		/* Touch screen calibration */
+		threshold = <50>;
+		gain = <5>;
+		offset = <10>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_disp: ipudisp1grp {
+		fsl,pins = <
+			/* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x30
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x30
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x30
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x30
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x30
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x30
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x30
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x30
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x30
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x30
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x30
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x30
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x30
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x30
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x30
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x30
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x30
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x30
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x30
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x30
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x30
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x30
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT			0x8
+		>;
+	};
+
+	pinctrl_ts_edt: ts1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B			0x130b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D30__UART3_CTS_B			0x130b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
+			MX6QDL_PAD_GPIO_1__SD1_CD_B			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD			0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK			0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0			0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1			0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2			0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3			0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+
+	pinctrl_wifi_npd: wifigrp {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10		0x13069
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts
new file mode 100644
index 0000000000000..028951955bdee
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 BTicino
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "BTicino i.MX6DL Mamoj board";
+	compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
+		brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>;
+		default-brightness-level = <7>;
+	};
+
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "rocktech,rk070er9427";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_lcd_lr>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif_pwr>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_lcd_3v3: regulator-lcd-dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-dvdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 1 0>;
+		enable-active-high;
+		startup-delay-us = <21000>;
+	};
+
+	reg_lcd_power: regulator-lcd-power {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-enable";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 6 0>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_3v3>;
+	};
+
+	reg_lcd_vgl: regulator-lcd-vgl {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vgl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_power>;
+	};
+
+	reg_lcd_vgh: regulator-lcd-vgh {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vgh";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_avdd>;
+	};
+
+	reg_lcd_vcom: regulator-lcd-vcom {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vcom";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <11000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vgh>;
+	};
+
+	reg_lcd_lr: regulator-lcd-lr {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-lr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vcom>;
+	};
+
+	reg_lcd_avdd: regulator-lcd-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-avdd";
+		regulator-min-microvolt = <10280000>;
+		regulator-max-microvolt = <10280000>;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vgl>;
+	};
+
+	reg_usb_host: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhost-vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhost>;
+		regulator-min-microvolt = <50000000>;
+		regulator-max-microvolt = <50000000>;
+		gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wl18xx_vmmc:  regulator-wl18xx-vmcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			/* CPU vdd_arm core */
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* SOC vdd_soc */
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* I/O power GEN_3V3 */
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DDR memory */
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DDR memory */
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* not used */
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			/* not used */
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			/* PMIC vsnvs. EX boot mode */
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* not used */
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			/* not used */
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			/* not used */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			/* 1v8 general power */
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* 2v8 general power IMX6 */
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* 3v3 Ethernet */
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2	0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_19__ENET_TX_ER		0x1b0b0
+			MX6QDL_PAD_GPIO_18__ENET_RX_CLK		0x1b0b1
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2	0x1b0b0
+			MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3      0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_KEY_COL3__ENET_CRS		0x1b0b0
+			MX6QDL_PAD_KEY_ROW1__ENET_COL		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL     0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA     0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10 /* VDOUT_HSYNC */
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10 /* VDOUT_VSYNC */
+			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04	   0x10 /* VDOUT_RESET */
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_ipu1_lcdif_pwr: ipu1lcdifpwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x40013058 /* EN_LCD33V */
+			MX6QDL_PAD_SD4_DAT5__GPIO2_IO13		0x4001b0b0 /* EN_AVDD */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x40013058 /* ENVGH */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x40013058 /* ENVGL */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x40013058 /* LCD_POWER */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x40013058 /* EN_VCOM_LCD */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x40013058 /* LCD_L_R */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x40013058 /* LCD_U_D */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhost: usbhostgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x4001b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17069
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10079
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21	0x4001b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6.dtsi
new file mode 100644
index 0000000000000..b749b424bbd6e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&ethphy {
+	rxdv-skew-ps = <180>;
+	txen-skew-ps = <0>;
+	rxd3-skew-ps = <180>;
+	rxd2-skew-ps = <180>;
+	rxd1-skew-ps = <180>;
+	rxd0-skew-ps = <180>;
+	txd3-skew-ps = <120>;
+	txd2-skew-ps = <0>;
+	txd1-skew-ps = <300>;
+	txd0-skew-ps = <120>;
+	txc-skew-ps = <1860>;
+	rxc-skew-ps = <1860>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-mba6a.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6a.dts
new file mode 100644
index 0000000000000..df0a96b28af0c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6a.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6S/DL on MBa6x";
+	compatible = "tq,imx6dl-mba6x-a", "tq,mba6a",
+		     "tq,imx6dl-tqma6dl-a", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-mba6b.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6b.dts
new file mode 100644
index 0000000000000..610b19d2db0fc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6b.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6S/DL on MBa6x";
+	compatible = "tq,imx6dl-mba6x-b", "tq,mba6b",
+		     "tq,imx6dl-tqma6dl-b", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-nit6xlite.dts
new file mode 100644
index 0000000000000..61fa30991d675
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-nit6xlite.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-nit6xlite.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board";
+	compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-nitrogen6x.dts
new file mode 100644
index 0000000000000..ef58d3b0ea0d4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-nitrogen6x.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board";
+	compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts
new file mode 100644
index 0000000000000..d906a7f05aaad
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND";
+	compatible = "phytec,imx6dl-pbac06-nand", "phytec,imx6dl-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&ethphy {
+	max-speed = <100>;
+};
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pbab01.dts
new file mode 100644
index 0000000000000..0a07cc6f815e1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pbab01.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+/dts-v1/;
+#include "imx6dl-phytec-pfla02.dtsi"
+#include "imx6qdl-phytec-pbab01.dtsi"
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 DualLite/Solo Carrier-Board";
+	compatible = "phytec,imx6dl-pbab01", "phytec,imx6dl-pfla02", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pfla02.dtsi
new file mode 100644
index 0000000000000..6f8aaf5244257
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pfla02.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-phytec-pfla02.dtsi"
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 DualLite/Solo";
+	compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-dwarf.dts
new file mode 100644
index 0000000000000..d85b15a8c1272
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-dwarf.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Dwarf baseboard";
+	compatible = "technexion,imx6dl-pico-dwarf", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-hobbit.dts
new file mode 100644
index 0000000000000..08fedcbcc91b6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-hobbit.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-hobbit.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Hobbit baseboard";
+	compatible = "technexion,imx6dl-pico-hobbit", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-pico-nymph.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-nymph.dts
new file mode 100644
index 0000000000000..32ccfc5d41cee
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-nymph.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Nymph baseboard";
+	compatible = "technexion,imx6dl-pico-nymph", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-pi.dts
new file mode 100644
index 0000000000000..4590e8ad9a91b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-pi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and PI baseboard";
+	compatible = "technexion,imx6dl-pico-pi", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6dl-pinfunc.h
new file mode 100644
index 0000000000000..9d88d09f9bf6f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pinfunc.h
@@ -0,0 +1,1088 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6DL_PINFUNC_H
+#define __DTS_IMX6DL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x04c 0x360 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x04c 0x360 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x04c 0x360 0x7f8 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x04c 0x360 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x04c 0x360 0x8fc 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x04c 0x360 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x04c 0x360 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x050 0x364 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x050 0x364 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x050 0x364 0x800 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x050 0x364 0x8fc 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x050 0x364 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x050 0x364 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x050 0x364 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x054 0x368 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x054 0x368 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x054 0x368 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x054 0x368 0x914 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x054 0x368 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x054 0x368 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x058 0x36c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x058 0x36c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x058 0x36c 0x914 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x058 0x36c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x058 0x36c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x058 0x36c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x05c 0x370 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x05c 0x370 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x05c 0x370 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x05c 0x370 0x91c 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x05c 0x370 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x05c 0x370 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x060 0x374 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x060 0x374 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x060 0x374 0x91c 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x060 0x374 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x060 0x374 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x060 0x374 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x064 0x378 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x064 0x378 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x064 0x378 0x910 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x064 0x378 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x064 0x378 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x064 0x378 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x068 0x37c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x068 0x37c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x068 0x37c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x068 0x37c 0x910 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x068 0x37c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x068 0x37c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x06c 0x380 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x06c 0x380 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x06c 0x380 0x918 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x06c 0x380 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x06c 0x380 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x06c 0x380 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x070 0x384 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x070 0x384 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x070 0x384 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x070 0x384 0x918 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x070 0x384 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x074 0x388 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x074 0x388 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x074 0x388 0x7d8 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x074 0x388 0x8c0 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x074 0x388 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x074 0x388 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x074 0x388 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x078 0x38c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x078 0x38c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x078 0x38c 0x7e0 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x078 0x38c 0x8cc 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x078 0x38c 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x078 0x38c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x078 0x38c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x07c 0x390 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x07c 0x390 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x07c 0x390 0x7dc 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x07c 0x390 0x8c4 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x07c 0x390 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x07c 0x390 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x07c 0x390 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x080 0x394 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x080 0x394 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x080 0x394 0x7e4 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x080 0x394 0x8d0 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x080 0x394 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x080 0x394 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x080 0x394 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x084 0x398 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x084 0x398 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x084 0x398 0x7f4 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x084 0x398 0x8c8 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x084 0x398 0x86c 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x084 0x398 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x084 0x398 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x088 0x39c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x088 0x39c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x088 0x39c 0x7fc 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x088 0x39c 0x8d4 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x088 0x39c 0x868 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x088 0x39c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x088 0x39c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x08c 0x3a0 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x08c 0x3a0 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x08c 0x3a0 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x08c 0x3a0 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x090 0x3a4 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x090 0x3a4 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x090 0x3a4 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x090 0x3a4 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x094 0x3a8 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x094 0x3a8 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x094 0x3a8 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x098 0x3ac 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x098 0x3ac 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x098 0x3ac 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x098 0x3ac 0x000 0x7 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x09c 0x3b0 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__LCD_CLK            0x09c 0x3b0 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x09c 0x3b0 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__LCD_WR_RWN         0x09c 0x3b0 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x0a0 0x3b4 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN15__LCD_ENABLE            0x0a0 0x3b4 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x0a0 0x3b4 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x0a0 0x3b4 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN15__LCD_RD_E              0x0a0 0x3b4 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x0a4 0x3b8 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN2__LCD_HSYNC              0x0a4 0x3b8 0x8d8 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x0a4 0x3b8 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x0a4 0x3b8 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN2__LCD_RS                 0x0a4 0x3b8 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x0a8 0x3bc 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN3__LCD_VSYNC              0x0a8 0x3bc 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x0a8 0x3bc 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x0a8 0x3bc 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN3__LCD_CS                 0x0a8 0x3bc 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x0ac 0x3c0 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN4__LCD_BUSY               0x0ac 0x3c0 0x8d8 0x1 0x1
+#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x0ac 0x3c0 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x0ac 0x3c0 0x92c 0x3 0x0
+#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x0ac 0x3c0 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN4__LCD_RESET              0x0ac 0x3c0 0x000 0x8 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x0b0 0x3c4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT0__LCD_DATA00           0x0b0 0x3c4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x0b0 0x3c4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x0b0 0x3c4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x0b4 0x3c8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT1__LCD_DATA01           0x0b4 0x3c8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x0b4 0x3c8 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x0b4 0x3c8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x0b8 0x3cc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT10__LCD_DATA10          0x0b8 0x3cc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x0b8 0x3cc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x0bc 0x3d0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT11__LCD_DATA11          0x0bc 0x3d0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x0bc 0x3d0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x0c0 0x3d4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT12__LCD_DATA12          0x0c0 0x3d4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x0c0 0x3d4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x0c4 0x3d8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT13__LCD_DATA13          0x0c4 0x3d8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x0c4 0x3d8 0x7bc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x0c4 0x3d8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x0c8 0x3dc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT14__LCD_DATA14          0x0c8 0x3dc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x0c8 0x3dc 0x7b8 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x0c8 0x3dc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x0cc 0x3e0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT15__LCD_DATA15          0x0cc 0x3e0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x0cc 0x3e0 0x7e8 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x0cc 0x3e0 0x804 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x0cc 0x3e0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x0d0 0x3e4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT16__LCD_DATA16          0x0d0 0x3e4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x0d0 0x3e4 0x7fc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x0d0 0x3e4 0x7c0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x0d0 0x3e4 0x8e8 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x0d0 0x3e4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x0d4 0x3e8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT17__LCD_DATA17          0x0d4 0x3e8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x0d4 0x3e8 0x7f8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x0d4 0x3e8 0x7b4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x0d4 0x3e8 0x8ec 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x0d4 0x3e8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x0d8 0x3ec 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT18__LCD_DATA18          0x0d8 0x3ec 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x0d8 0x3ec 0x800 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x0d8 0x3ec 0x7c4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x0d8 0x3ec 0x7a4 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x0d8 0x3ec 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x0d8 0x3ec 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x0dc 0x3f0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT19__LCD_DATA19          0x0dc 0x3f0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x0dc 0x3f0 0x7f4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x0dc 0x3f0 0x7b0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x0dc 0x3f0 0x7a0 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x0dc 0x3f0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x0dc 0x3f0 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x0e0 0x3f4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT2__LCD_DATA02           0x0e0 0x3f4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x0e0 0x3f4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x0e0 0x3f4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x0e4 0x3f8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT20__LCD_DATA20          0x0e4 0x3f8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x0e4 0x3f8 0x7d8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x0e4 0x3f8 0x7a8 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x0e4 0x3f8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x0e8 0x3fc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT21__LCD_DATA21          0x0e8 0x3fc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x0e8 0x3fc 0x7e0 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x0e8 0x3fc 0x79c 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x0e8 0x3fc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x0ec 0x400 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT22__LCD_DATA22          0x0ec 0x400 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x0ec 0x400 0x7dc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x0ec 0x400 0x7ac 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x0ec 0x400 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x0f0 0x404 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT23__LCD_DATA23          0x0f0 0x404 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x0f0 0x404 0x7e4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x0f0 0x404 0x798 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x0f0 0x404 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x0f4 0x408 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT3__LCD_DATA03           0x0f4 0x408 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x0f4 0x408 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x0f4 0x408 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x0f8 0x40c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT4__LCD_DATA04           0x0f8 0x40c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x0f8 0x40c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x0f8 0x40c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x0fc 0x410 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT5__LCD_DATA05           0x0fc 0x410 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x0fc 0x410 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x0fc 0x410 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x0fc 0x410 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x100 0x414 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT6__LCD_DATA06           0x100 0x414 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x100 0x414 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x100 0x414 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x100 0x414 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x104 0x418 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT7__LCD_DATA07           0x104 0x418 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x104 0x418 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x104 0x418 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x108 0x41c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT8__LCD_DATA08           0x108 0x41c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x108 0x41c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x108 0x41c 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x108 0x41c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x10c 0x420 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT9__LCD_DATA09           0x10c 0x420 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x10c 0x420 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x10c 0x420 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x10c 0x420 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x110 0x4e0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x110 0x4e0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK        0x110 0x4e0 0x8b8 0x2 0x0
+#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x110 0x4e0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x110 0x4e0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A16__EPDC_DATA00             0x110 0x4e0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x114 0x4e4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x114 0x4e4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12        0x114 0x4e4 0x890 0x2 0x0
+#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x114 0x4e4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x114 0x4e4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A17__EPDC_PWR_STAT           0x114 0x4e4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x118 0x4e8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x118 0x4e8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13        0x118 0x4e8 0x894 0x2 0x0
+#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x118 0x4e8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x118 0x4e8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A18__EPDC_PWR_CTRL0          0x118 0x4e8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x11c 0x4ec 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x11c 0x4ec 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14        0x11c 0x4ec 0x898 0x2 0x0
+#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x11c 0x4ec 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x11c 0x4ec 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A19__EPDC_PWR_CTRL1          0x11c 0x4ec 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x120 0x4f0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x120 0x4f0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15        0x120 0x4f0 0x89c 0x2 0x0
+#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x120 0x4f0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x120 0x4f0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A20__EPDC_PWR_CTRL2          0x120 0x4f0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x124 0x4f4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x124 0x4f4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16        0x124 0x4f4 0x8a0 0x2 0x0
+#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x124 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x124 0x4f4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A21__EPDC_GDCLK              0x124 0x4f4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x128 0x4f8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x128 0x4f8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17        0x128 0x4f8 0x8a4 0x2 0x0
+#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x128 0x4f8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x128 0x4f8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A22__EPDC_GDSP               0x128 0x4f8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x12c 0x4fc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x12c 0x4fc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18        0x12c 0x4fc 0x8a8 0x2 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x12c 0x4fc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x12c 0x4fc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x12c 0x4fc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A23__EPDC_GDOE               0x12c 0x4fc 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x130 0x500 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x130 0x500 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19        0x130 0x500 0x8ac 0x2 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x130 0x500 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x130 0x500 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x130 0x500 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A24__EPDC_GDRL               0x130 0x500 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x134 0x504 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x134 0x504 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x134 0x504 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x134 0x504 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x134 0x504 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x134 0x504 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x134 0x504 0x85c 0x6 0x0
+#define MX6QDL_PAD_EIM_A25__EPDC_DATA15             0x134 0x504 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ACLK_FREERUN        0x134 0x504 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x138 0x508 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x138 0x508 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x138 0x508 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_BCLK__EPDC_SDCE9             0x138 0x508 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x13c 0x50c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x13c 0x50c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x13c 0x50c 0x7f4 0x2 0x2
+#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x13c 0x50c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS0__EPDC_DATA06             0x13c 0x50c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x140 0x510 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x140 0x510 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x140 0x510 0x7fc 0x2 0x2
+#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x140 0x510 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS1__EPDC_DATA08             0x140 0x510 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x144 0x514 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x144 0x514 0x7d8 0x1 0x2
+#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x144 0x514 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18        0x144 0x514 0x8a8 0x3 0x1
+#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x144 0x514 0x864 0x4 0x0
+#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x144 0x514 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x144 0x514 0x874 0x6 0x0
+#define MX6QDL_PAD_EIM_D16__EPDC_DATA10             0x144 0x514 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x148 0x518 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x148 0x518 0x7dc 0x1 0x2
+#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x148 0x518 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK        0x148 0x518 0x8b8 0x3 0x1
+#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x148 0x518 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x148 0x518 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x148 0x518 0x878 0x6 0x0
+#define MX6QDL_PAD_EIM_D17__EPDC_VCOM0              0x148 0x518 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x14c 0x51c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x14c 0x51c 0x7e0 0x1 0x2
+#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x14c 0x51c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17        0x14c 0x51c 0x8a4 0x3 0x1
+#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x14c 0x51c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x14c 0x51c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x14c 0x51c 0x87c 0x6 0x0
+#define MX6QDL_PAD_EIM_D18__EPDC_VCOM1              0x14c 0x51c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x150 0x520 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x150 0x520 0x7e8 0x1 0x1
+#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x150 0x520 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16        0x150 0x520 0x8a0 0x3 0x1
+#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x150 0x520 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x150 0x520 0x8f8 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x150 0x520 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x150 0x520 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D19__EPDC_DATA12             0x150 0x520 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x154 0x524 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x154 0x524 0x808 0x1 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x154 0x524 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15        0x154 0x524 0x89c 0x3 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x154 0x524 0x8f8 0x4 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x154 0x524 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x154 0x524 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x154 0x524 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x158 0x528 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x158 0x528 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x158 0x528 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_CSI1_DATA11        0x158 0x528 0x88c 0x3 0x0
+#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x158 0x528 0x920 0x4 0x0
+#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x158 0x528 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x158 0x528 0x868 0x6 0x1
+#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x158 0x528 0x8f0 0x7 0x0
+#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x15c 0x52c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x15c 0x52c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x15c 0x52c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_CSI1_DATA10        0x15c 0x52c 0x888 0x3 0x0
+#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x15c 0x52c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x15c 0x52c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x15c 0x52c 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D22__EPDC_SDCE6              0x15c 0x52c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x160 0x530 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x160 0x530 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x160 0x530 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x160 0x530 0x908 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x160 0x530 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_CSI1_DATA_EN       0x160 0x530 0x8b0 0x4 0x0
+#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x160 0x530 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x160 0x530 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x160 0x530 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D23__EPDC_DATA11             0x160 0x530 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x164 0x534 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x164 0x534 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x164 0x534 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x164 0x534 0x90c 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x164 0x534 0x7ec 0x3 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x164 0x534 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x164 0x534 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x164 0x534 0x7bc 0x6 0x1
+#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x164 0x534 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D24__EPDC_SDCE7              0x164 0x534 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x168 0x538 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x168 0x538 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x168 0x538 0x90c 0x2 0x1
+#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x168 0x538 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x168 0x538 0x7f0 0x3 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x168 0x538 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x168 0x538 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x168 0x538 0x7b8 0x6 0x1
+#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x168 0x538 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D25__EPDC_SDCE8              0x168 0x538 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x16c 0x53c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x16c 0x53c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x16c 0x53c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14        0x16c 0x53c 0x898 0x3 0x1
+#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x16c 0x53c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x16c 0x53c 0x904 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x16c 0x53c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x16c 0x53c 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x16c 0x53c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D26__EPDC_SDOED              0x16c 0x53c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x170 0x540 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x170 0x540 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x170 0x540 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13        0x170 0x540 0x894 0x3 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x170 0x540 0x904 0x4 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x170 0x540 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x170 0x540 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x170 0x540 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x170 0x540 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D27__EPDC_SDOE               0x170 0x540 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x174 0x544 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x174 0x544 0x86c 0x1 0x1
+#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x174 0x544 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_CSI1_DATA12        0x174 0x544 0x890 0x3 0x1
+#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x174 0x544 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x174 0x544 0x900 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x174 0x544 0x900 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x174 0x544 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x174 0x544 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x174 0x544 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x174 0x544 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D28__EPDC_PWR_CTRL3          0x174 0x544 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x178 0x548 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x178 0x548 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x178 0x548 0x808 0x2 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x178 0x548 0x900 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x178 0x548 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x178 0x548 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x178 0x548 0x900 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x178 0x548 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC         0x178 0x548 0x8bc 0x6 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x178 0x548 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D29__EPDC_PWR_WAKE           0x178 0x548 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x17c 0x54c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x17c 0x54c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x17c 0x54c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x17c 0x54c 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x17c 0x54c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x17c 0x54c 0x908 0x4 0x1
+#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x17c 0x54c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x17c 0x54c 0x924 0x6 0x0
+#define MX6QDL_PAD_EIM_D30__EPDC_SDOEZ              0x17c 0x54c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x180 0x550 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x180 0x550 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x180 0x550 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x180 0x550 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x180 0x550 0x908 0x4 0x2
+#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x180 0x550 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x180 0x550 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x180 0x550 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D31__EPDC_SDCLK_P            0x180 0x550 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_ACLK_FREERUN        0x180 0x550 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x184 0x554 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x184 0x554 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_CSI1_DATA09        0x184 0x554 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x184 0x554 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x184 0x554 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA0__EPDC_SDCLK_N            0x184 0x554 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x188 0x558 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x188 0x558 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_CSI1_DATA08        0x188 0x558 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x188 0x558 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x188 0x558 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA1__EPDC_SDLE               0x188 0x558 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x18c 0x55c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x18c 0x55c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN      0x18c 0x55c 0x8b0 0x2 0x1
+#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x18c 0x55c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x18c 0x55c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA10__EPDC_DATA01            0x18c 0x55c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x190 0x560 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x190 0x560 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_CSI1_HSYNC        0x190 0x560 0x8b4 0x2 0x0
+#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x190 0x560 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x190 0x560 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA11__EPDC_DATA03            0x190 0x560 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x194 0x564 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x194 0x564 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_CSI1_VSYNC        0x194 0x564 0x8bc 0x2 0x1
+#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x194 0x564 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x194 0x564 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA12__EPDC_DATA02            0x194 0x564 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x198 0x568 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x198 0x568 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x198 0x568 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x198 0x568 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA13__EPDC_DATA13            0x198 0x568 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x19c 0x56c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x19c 0x56c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x19c 0x56c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x19c 0x56c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA14__EPDC_DATA14            0x19c 0x56c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x1a0 0x570 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x1a0 0x570 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x1a0 0x570 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x1a0 0x570 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x1a0 0x570 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA15__EPDC_DATA09            0x1a0 0x570 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x1a4 0x574 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x1a4 0x574 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_CSI1_DATA07        0x1a4 0x574 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x1a4 0x574 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x1a4 0x574 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA2__EPDC_BDR0               0x1a4 0x574 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x1a8 0x578 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x1a8 0x578 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_CSI1_DATA06        0x1a8 0x578 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x1a8 0x578 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x1a8 0x578 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA3__EPDC_BDR1               0x1a8 0x578 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x1ac 0x57c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x1ac 0x57c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_CSI1_DATA05        0x1ac 0x57c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x1ac 0x57c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x1ac 0x57c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA4__EPDC_SDCE0              0x1ac 0x57c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x1b0 0x580 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x1b0 0x580 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_CSI1_DATA04        0x1b0 0x580 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x1b0 0x580 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x1b0 0x580 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA5__EPDC_SDCE1              0x1b0 0x580 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x1b4 0x584 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x1b4 0x584 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_CSI1_DATA03        0x1b4 0x584 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x1b4 0x584 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x1b4 0x584 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA6__EPDC_SDCE2              0x1b4 0x584 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x1b8 0x588 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x1b8 0x588 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_CSI1_DATA02        0x1b8 0x588 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x1b8 0x588 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x1b8 0x588 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA7__EPDC_SDCE3              0x1b8 0x588 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x1bc 0x58c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x1bc 0x58c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_CSI1_DATA01        0x1bc 0x58c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x1bc 0x58c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x1bc 0x58c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA8__EPDC_SDCE4              0x1bc 0x58c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x1c0 0x590 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x1c0 0x590 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_CSI1_DATA00        0x1c0 0x590 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x1c0 0x590 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x1c0 0x590 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA9__EPDC_SDCE5              0x1c0 0x590 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x1c4 0x594 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x1c4 0x594 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_CSI1_DATA11        0x1c4 0x594 0x88c 0x2 0x1
+#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x1c4 0x594 0x7d4 0x4 0x0
+#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x1c4 0x594 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x1c4 0x594 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB0__EPDC_PWR_COM            0x1c4 0x594 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x1c8 0x598 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x1c8 0x598 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_CSI1_DATA10        0x1c8 0x598 0x888 0x2 0x1
+#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x1c8 0x598 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x1c8 0x598 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB1__EPDC_SDSHR              0x1c8 0x598 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x1cc 0x59c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x1cc 0x59c 0x7e4 0x1 0x2
+#define MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19        0x1cc 0x59c 0x8ac 0x3 0x1
+#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x1cc 0x59c 0x860 0x4 0x0
+#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x1cc 0x59c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x1cc 0x59c 0x870 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x1cc 0x59c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB2__EPDC_DATA05             0x1cc 0x59c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x1d0 0x5a0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x1d0 0x5a0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x1d0 0x5a0 0x908 0x2 0x3
+#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x1d0 0x5a0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x1d0 0x5a0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC         0x1d0 0x5a0 0x8b4 0x4 0x1
+#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x1d0 0x5a0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x1d0 0x5a0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x1d0 0x5a0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB3__EPDC_SDCE0              0x1d0 0x5a0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_ACLK_FREERUN        0x1d0 0x5a0 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x1d4 0x5a4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x1d4 0x5a4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x1d4 0x5a4 0x804 0x2 0x1
+#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x1d4 0x5a4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x1d4 0x5a4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_LBA__EPDC_DATA04             0x1d4 0x5a4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x1d8 0x5a8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x1d8 0x5a8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x1d8 0x5a8 0x7f8 0x2 0x2
+#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x1d8 0x5a8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_OE__EPDC_PWR_IRQ             0x1d8 0x5a8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x1dc 0x5ac 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x1dc 0x5ac 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x1dc 0x5ac 0x800 0x2 0x2
+#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x1dc 0x5ac 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x1dc 0x5ac 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_RW__EPDC_DATA07              0x1dc 0x5ac 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x1e0 0x5b0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x1e0 0x5b0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x1e0 0x5b0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x1e0 0x5b0 0x000 0x7 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1e4 0x5b4 0x828 0x1 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1e4 0x5b4 0x840 0x2 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1e4 0x5b4 0x8f4 0x3 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1e4 0x5b4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1e8 0x5b8 0x8e0 0x0 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1e8 0x5b8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1e8 0x5b8 0x858 0x2 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1e8 0x5b8 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1e8 0x5b8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1ec 0x5bc 0x810 0x1 0x0
+#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1ec 0x5bc 0x83c 0x2 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1ec 0x5bc 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1ec 0x5bc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1ec 0x5bc 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1f0 0x5c0 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1f0 0x5c0 0x82c 0x2 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1f0 0x5c0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1f0 0x5c0 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1f4 0x5c4 0x790 0x0 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1f4 0x5c4 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1f4 0x5c4 0x834 0x2 0x0
+#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1f4 0x5c4 0x8f0 0x3 0x1
+#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1f4 0x5c4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT        0x1f8 0x5c8 0x000 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1f8 0x5c8 0x818 0x1 0x0
+#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1f8 0x5c8 0x838 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1f8 0x5c8 0x000 0x3 0x0
+#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1f8 0x5c8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1fc 0x5cc 0x8e4 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1fc 0x5cc 0x81c 0x1 0x0
+#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1fc 0x5cc 0x830 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1fc 0x5cc 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1fc 0x5cc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x200 0x5d0 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x200 0x5d0 0x850 0x2 0x0
+#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x200 0x5d0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__I2C4_SCL             0x200 0x5d0 0x880 0x9 0x0
+#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x204 0x5d4 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x204 0x5d4 0x854 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x204 0x5d4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x208 0x5d8 0x8dc 0x0 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x208 0x5d8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x208 0x5d8 0x84c 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x208 0x5d8 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x208 0x5d8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__I2C4_SDA              0x208 0x5d8 0x884 0x9 0x0
+#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x20c 0x5dc 0x000 0x0 0x0
+#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x20c 0x5dc 0x8c0 0x2 0x1
+#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x20c 0x5dc 0x794 0x3 0x0
+#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x20c 0x5dc 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x20c 0x5dc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x20c 0x5dc 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x20c 0x5dc 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x210 0x5e0 0x83c 0x0 0x1
+#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x210 0x5e0 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x210 0x5e0 0x8cc 0x2 0x1
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x210 0x5e0 0x790 0x3 0x1
+#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x210 0x5e0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x210 0x5e0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x210 0x5e0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x214 0x5e4 0x850 0x0 0x1
+#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x214 0x5e4 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x214 0x5e4 0x80c 0x2 0x0
+#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x214 0x5e4 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x214 0x5e4 0x8f0 0x4 0x2
+#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x214 0x5e4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x214 0x5e4 0x87c 0x6 0x1
+#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x214 0x5e4 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x218 0x5e8 0x844 0x0 0x0
+#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x218 0x5e8 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x218 0x5e8 0x7d4 0x2 0x1
+#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x218 0x5e8 0x8e8 0x3 0x1
+#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x218 0x5e8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x218 0x5e8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x21c 0x5ec 0x848 0x0 0x0
+#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x21c 0x5ec 0x814 0x1 0x0
+#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x21c 0x5ec 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x21c 0x5ec 0x8ec 0x3 0x1
+#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x21c 0x5ec 0x794 0x4 0x1
+#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x21c 0x5ec 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x21c 0x5ec 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x220 0x5f0 0x8c0 0x0 0x2
+#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x220 0x5f0 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x220 0x5f0 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x220 0x5f0 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x220 0x5f0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x220 0x5f0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x220 0x5f0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x224 0x5f4 0x830 0x0 0x1
+#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x224 0x5f4 0x8d0 0x2 0x1
+#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x224 0x5f4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x224 0x5f4 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x224 0x5f4 0x8e0 0x7 0x1
+#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x228 0x5f8 0x834 0x0 0x1
+#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x228 0x5f8 0x878 0x2 0x1
+#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x228 0x5f8 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x228 0x5f8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x228 0x5f8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x228 0x5f8 0x924 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x228 0x5f8 0x8dc 0x7 0x1
+#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x22c 0x5fc 0x838 0x0 0x1
+#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x22c 0x5fc 0x8c8 0x2 0x1
+#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x22c 0x5fc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x22c 0x5fc 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x230 0x600 0x84c 0x0 0x1
+#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x230 0x600 0x8d4 0x2 0x1
+#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x230 0x600 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x230 0x600 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x230 0x600 0x878 0x6 0x2
+#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x230 0x600 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x234 0x604 0x840 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x234 0x604 0x03c 0x11 0xff000609
+#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x234 0x604 0x87c 0x2 0x2
+#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x234 0x604 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x234 0x604 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x234 0x604 0x8e4 0x7 0x1
+#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x238 0x608 0x854 0x0 0x1
+#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x238 0x608 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x238 0x608 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x238 0x608 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x238 0x608 0x904 0x4 0x2
+#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x238 0x608 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x238 0x608 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x238 0x608 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_7__I2C4_SCL                 0x238 0x608 0x880 0x8 0x1
+#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x23c 0x60c 0x858 0x0 0x1
+#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x23c 0x60c 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x23c 0x60c 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x23c 0x60c 0x7c8 0x3 0x0
+#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x23c 0x60c 0x904 0x4 0x3
+#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x23c 0x60c 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x23c 0x60c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x23c 0x60c 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x23c 0x60c 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_8__I2C4_SDA                 0x23c 0x60c 0x884 0x8 0x1
+#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x240 0x610 0x82c 0x0 0x1
+#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x240 0x610 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x240 0x610 0x8c4 0x2 0x1
+#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x240 0x610 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x240 0x610 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x240 0x610 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x240 0x610 0x92c 0x6 0x1
+#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x244 0x62c 0x7d8 0x0 0x3
+#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x244 0x62c 0x824 0x1 0x0
+#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x244 0x62c 0x7c0 0x2 0x1
+#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x244 0x62c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x244 0x62c 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x244 0x62c 0x914 0x4 0x2
+#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x244 0x62c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x244 0x62c 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x248 0x630 0x7dc 0x0 0x3
+#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x248 0x630 0x810 0x1 0x1
+#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x248 0x630 0x7c4 0x2 0x1
+#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x248 0x630 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x248 0x630 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x248 0x630 0x91c 0x4 0x2
+#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x248 0x630 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x248 0x630 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x24c 0x634 0x7e8 0x0 0x2
+#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x24c 0x634 0x820 0x1 0x0
+#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x24c 0x634 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x24c 0x634 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x24c 0x634 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x24c 0x634 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x24c 0x634 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x250 0x638 0x7f0 0x0 0x1
+#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x250 0x638 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x250 0x638 0x860 0x2 0x1
+#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x250 0x638 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x250 0x638 0x870 0x4 0x1
+#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x250 0x638 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x250 0x638 0x8f0 0x6 0x3
+#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x254 0x63c 0x000 0x0 0x0
+#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x254 0x63c 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x254 0x63c 0x920 0x2 0x1
+#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x254 0x63c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x254 0x63c 0x918 0x4 0x2
+#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x254 0x63c 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x254 0x63c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x258 0x640 0x7e0 0x0 0x3
+#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x258 0x640 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x258 0x640 0x7b4 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x258 0x640 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x258 0x640 0x914 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x258 0x640 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x258 0x640 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x258 0x640 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x25c 0x644 0x7e4 0x0 0x3
+#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x25c 0x644 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x25c 0x644 0x7b0 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x25c 0x644 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x25c 0x644 0x91c 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x25c 0x644 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x25c 0x644 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x25c 0x644 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x260 0x648 0x7ec 0x0 0x1
+#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x260 0x648 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x260 0x648 0x7c8 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x260 0x648 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x260 0x648 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x260 0x648 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x260 0x648 0x85c 0x6 0x1
+#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x264 0x64c 0x794 0x1 0x2
+#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x264 0x64c 0x864 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x264 0x64c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x264 0x64c 0x874 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x264 0x64c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x264 0x64c 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x268 0x650 0x7cc 0x0 0x0
+#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x268 0x650 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x268 0x650 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x268 0x650 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x268 0x650 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x268 0x650 0x918 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x268 0x650 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x26c 0x654 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x26c 0x654 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x26c 0x654 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x270 0x658 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x270 0x658 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x274 0x65c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x274 0x65c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x278 0x660 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x278 0x660 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x278 0x660 0x000 0x2 0x0
+#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x278 0x660 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x27c 0x664 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x27c 0x664 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x27c 0x664 0x844 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x27c 0x664 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x27c 0x664 0x000 0x4 0x0
+#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x27c 0x664 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x280 0x668 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x280 0x668 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x280 0x668 0x848 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x280 0x668 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x280 0x668 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__I2C4_SDA              0x280 0x668 0x884 0x9 0x2
+#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x284 0x66c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x284 0x66c 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x284 0x66c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x288 0x670 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x288 0x670 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x288 0x670 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x28c 0x674 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x28c 0x674 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x28c 0x674 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x290 0x678 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x290 0x678 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x290 0x678 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x294 0x67c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x294 0x67c 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x294 0x67c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x298 0x680 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x298 0x680 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x298 0x680 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x29c 0x684 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x29c 0x684 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x29c 0x684 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x2a0 0x688 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x2a0 0x688 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x2a0 0x688 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2a4 0x68c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2a4 0x68c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2a8 0x690 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2a8 0x690 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__I2C4_SCL             0x2a8 0x690 0x880 0x9 0x2
+#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x2ac 0x694 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x2ac 0x694 0x818 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x2ac 0x694 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x2b0 0x698 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x2b0 0x698 0x81c 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x2b0 0x698 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x2b4 0x69c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x2b4 0x69c 0x820 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x2b4 0x69c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x2b8 0x6a0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x2b8 0x6a0 0x824 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x2b8 0x6a0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x2bc 0x6a4 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x2bc 0x6a4 0x828 0x1 0x1
+#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x2bc 0x6a4 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x2c0 0x6a8 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x2c0 0x6a8 0x814 0x1 0x1
+#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x2c0 0x6a8 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x2c4 0x6ac 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x2c4 0x6ac 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x2c4 0x6ac 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x2c8 0x6b0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x2c8 0x6b0 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x2c8 0x6b0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x2cc 0x6b4 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x2cc 0x6b4 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x2cc 0x6b4 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x2d0 0x6b8 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x2d0 0x6b8 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x2d0 0x6b8 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x2d4 0x6bc 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x2d4 0x6bc 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x2d4 0x6bc 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x2d4 0x6bc 0x80c 0x7 0x1
+#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x2d8 0x6c0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x2d8 0x6c0 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x2d8 0x6c0 0x8f4 0x2 0x1
+#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x2d8 0x6c0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x2d8 0x6c0 0x000 0x7 0x0
+#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x2dc 0x6c4 0x928 0x0 0x1
+#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x2dc 0x6c4 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x2dc 0x6c4 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x2dc 0x6c4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x2e0 0x6c8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x2e0 0x6c8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x2e0 0x6c8 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x2e0 0x6c8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x2e4 0x6cc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x2e4 0x6cc 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x2e4 0x6cc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x2e8 0x6d0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x2e8 0x6d0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x2e8 0x6d0 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x2e8 0x6d0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x2ec 0x6d4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x2ec 0x6d4 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x2ec 0x6d4 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x2ec 0x6d4 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x2ec 0x6d4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x2ec 0x6d4 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x2f0 0x6d8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x2f0 0x6d8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x2f0 0x6d8 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x2f0 0x6d8 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x2f0 0x6d8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x2f0 0x6d8 0x000 0x6 0x0
+#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x2f4 0x6dc 0x930 0x0 0x1
+#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x2f4 0x6dc 0x8c0 0x2 0x3
+#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x2f4 0x6dc 0x7a4 0x3 0x1
+#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x2f4 0x6dc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x2f8 0x6e0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x2f8 0x6e0 0x8cc 0x2 0x2
+#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x2f8 0x6e0 0x7a0 0x3 0x1
+#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x2f8 0x6e0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x2fc 0x6e4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x2fc 0x6e4 0x798 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x2fc 0x6e4 0x8d4 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x2fc 0x6e4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x2fc 0x6e4 0x000 0x6 0x0
+#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x300 0x6e8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x300 0x6e8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x300 0x6e8 0x7ac 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x300 0x6e8 0x8c8 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x300 0x6e8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x304 0x6ec 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x304 0x6ec 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x304 0x6ec 0x79c 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x304 0x6ec 0x8d0 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x304 0x6ec 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x308 0x6f0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x308 0x6f0 0x8c4 0x2 0x2
+#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x308 0x6f0 0x7a8 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x308 0x6f0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x30c 0x6f4 0x934 0x0 0x1
+#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x30c 0x6f4 0x900 0x1 0x2
+#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x30c 0x6f4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x30c 0x6f4 0x7c8 0x2 0x2
+#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x30c 0x6f4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x310 0x6f8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x310 0x6f8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x310 0x6f8 0x900 0x1 0x3
+#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x310 0x6f8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x310 0x6f8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x314 0x6fc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x314 0x6fc 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x314 0x6fc 0x8f8 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x314 0x6fc 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x314 0x6fc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x318 0x700 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x318 0x700 0x8f8 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x318 0x700 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x318 0x700 0x7cc 0x2 0x1
+#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x318 0x700 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x31c 0x704 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x31c 0x704 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x320 0x708 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x320 0x708 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x320 0x708 0x908 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x320 0x708 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x324 0x70c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x324 0x70c 0x904 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x324 0x70c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x324 0x70c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x328 0x710 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x328 0x710 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x328 0x710 0x904 0x1 0x5
+#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x328 0x710 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x32c 0x714 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x32c 0x714 0x8fc 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x32c 0x714 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x32c 0x714 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x330 0x718 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x330 0x718 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x330 0x718 0x8fc 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x330 0x718 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x334 0x71c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x334 0x71c 0x908 0x1 0x5
+#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x334 0x71c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x334 0x71c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x338 0x720 0x938 0x0 0x1
+#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x338 0x720 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x338 0x720 0x90c 0x2 0x2
+#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x338 0x720 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x338 0x720 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x33c 0x724 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x33c 0x724 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x33c 0x724 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x33c 0x724 0x90c 0x2 0x3
+#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x33c 0x724 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x340 0x728 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x340 0x728 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x340 0x728 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x344 0x72c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x344 0x72c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x344 0x72c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x348 0x730 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x348 0x730 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x348 0x730 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x34c 0x734 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x34c 0x734 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x350 0x738 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x350 0x738 0x904 0x2 0x6
+#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x350 0x738 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x350 0x738 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x354 0x73c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x354 0x73c 0x900 0x2 0x4
+#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x354 0x73c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x354 0x73c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x358 0x740 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x358 0x740 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x358 0x740 0x900 0x2 0x5
+#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x358 0x740 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x35c 0x744 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x35c 0x744 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x35c 0x744 0x904 0x2 0x7
+#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x35c 0x744 0x000 0x5 0x0
+
+#endif /* __DTS_IMX6DL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-plybas.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-plybas.dts
new file mode 100644
index 0000000000000..84f34da06267e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-plybas.dts
@@ -0,0 +1,396 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Plymovent BAS board";
+	compatible = "ply,plybas", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-start {
+			label = "START";
+			linux,code = <31>;
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+		};
+
+		button-clean {
+			label = "CLEAN";
+			linux,code = <46>;
+			gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			label = "debug0";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "debug1";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "light_tower1";
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-3 {
+			label = "light_tower2";
+			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			label = "light_tower3";
+			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			label = "light_tower4";
+			gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_5v0>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_5v0>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "SD1_CD", "", "", "", "", "", "",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "ECSPI1_SS1", "", "USB_EXT_PWR", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "CAN1_SR", "CAN2_SR", "", "",
+		"LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "IMX6_IN12", "IMX6_HMI",
+			"IMX6_IN11", "IMX6_BUZZER", "IMX6_LED1", "IMX6_LED2",
+		"IMX6_LED3", "IMX6_LED4", "ETH_RESET", "IMX6_ANA_OUT_SD",
+			"IMX6_ANA_OUT_ERR", "IMX6_ANA_OUT", "ETH_INTRP", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "IMX6_RELAY1", "IMX6_RELAY2", "",
+		"IMX6_IN1", "IMX6_IN2", "IMX6_IN3", "IMX6_IN4", "IMX6_IN5",
+			"IMX6_IN6", "IMX6_IN7", "IMX6_IN8",
+		"IMX6_IN9", "IMX6_IN10", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	/* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-delay = <0 20>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
+			/* CAN2_SR */
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x1b000
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x3008
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x3008
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x3008
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			/* DEBUG_0 */
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0
+			/* DEBUG_1 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09			0x1b0b0
+
+			/* LED1 (lighttower) */
+			MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22		0x13070
+			/* LED2 (lighttower) */
+			MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23		0x13070
+			/* LED3 (lighttower) */
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24		0x13070
+			/* LED4 (lighttower) */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25		0x13070
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
+		>;
+	};
+
+	/* YaCO AUX Uart */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B		0x130b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts
new file mode 100644
index 0000000000000..dfa8110b1d97b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts
@@ -0,0 +1,573 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Plymovent M2M board";
+	compatible = "ply,plym2m", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 1000>;
+		num-interpolated-steps = <20>;
+		default-brightness-level = <19>;
+		power-supply = <&reg_12v0>;
+	};
+
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-0 = <&pinctrl_ipu1_disp>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			label = "debug0";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0bdh6";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_5v0>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_tsc2046>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@2 {
+			reg = <2>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		/* channel 6 is not connected */
+
+		channel@7 {
+			reg = <7>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"CAN1_TERM", "SD1_CD", "", "", "", "", "", "",
+		"DEBUG_0", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "ECSPI2_SS0", "", "", "", "TSC_BUSY", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "ECSPI1_SS1", "TSC_PENIRQ", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "CAN1_SR", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "ETH_RESET", "ETH_INTRP",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	/* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	tsens0: temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x1b000
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x3008
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x3008
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x3008
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x10000
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0x3008
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0x3008
+			/* CS */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x3008
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_disp: ipudisp1grp {
+		fsl,pins = <
+			/* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x30
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x30
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x30
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x30
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x30
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x30
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x30
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x30
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x30
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x30
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x30
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x30
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x30
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x30
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x30
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x30
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x30
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x30
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x30
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x30
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x30
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x30
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT			0x8
+		>;
+	};
+
+	pinctrl_tsc2046: tsc2046grp {
+		fsl,pins = <
+			/* TSC_PENIRQ */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x1b0b1
+			/* TSC_BUSY */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
new file mode 100644
index 0000000000000..773a84a5739df
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
@@ -0,0 +1,860 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/display/sdtv-standards.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/tvp5150.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Protonic MVT board";
+	compatible = "prt,prtmvt", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <1>;
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	connector {
+		compatible = "composite-video-connector";
+		label = "Composite0";
+		sdtv-standards = <SDTV_STD_PAL_B>;
+
+		port {
+			comp0_out: endpoint {
+				remote-endpoint = <&tvp5150_comp0_in>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		autorepeat;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-f1 {
+			label = "GPIO Key F1";
+			linux,code = <KEY_F1>;
+			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f2 {
+			label = "GPIO Key F2";
+			linux,code = <KEY_F2>;
+			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f3 {
+			label = "GPIO Key F3";
+			linux,code = <KEY_F3>;
+			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f4 {
+			label = "GPIO Key F4";
+			linux,code = <KEY_F4>;
+			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f5 {
+			label = "GPIO Key F5";
+			linux,code = <KEY_F5>;
+			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
+		};
+
+		key-cycle {
+			label = "GPIO Key CYCLE";
+			linux,code = <KEY_CYCLEWINDOWS>;
+			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
+		};
+
+		key-esc {
+			label = "GPIO Key ESC";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
+		};
+
+		key-up {
+			label = "GPIO Key UP";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
+		};
+
+		key-down {
+			label = "GPIO Key DOWN";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
+		};
+
+		key-ok {
+			label = "GPIO Key OK";
+			linux,code = <KEY_OK>;
+			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f6 {
+			label = "GPIO Key F6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f7 {
+			label = "GPIO Key F7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f8 {
+			label = "GPIO Key F8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f9 {
+			label = "GPIO Key F9";
+			linux,code = <KEY_F9>;
+			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f10 {
+			label = "GPIO Key F10";
+			linux,code = <KEY_F10>;
+			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			label = "debug0";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "debug1";
+			function = LED_FUNCTION_DISK;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-2 {
+			label = "power_led";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	panel {
+		compatible = "kyo,tcg070wvlq", "lg,lb070wv8";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_h1_vbus: regulator-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR	IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0				IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&rmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <3000>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+			"CAM2_MIRROR", "", "", "SMBALERT",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+			"SD1_DATA3", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
+			"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
+		"", "", "", "", "", "", "", "ON_SWITCH",
+		"POWER_LED", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
+			"CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ",
+		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
+			"YACO_RESET";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX",
+		"", "", "DIP1_FB", "", "", "", "", "",
+		"CPU_LIGHT_ON", "", "ETH_RESET", "", "BL_EN",
+			"BL_PWM", "ETH_INTRP", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+
+	video@5c {
+		compatible = "ti,tvp5150";
+		reg = <0x5c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tvp5150_comp0_in: endpoint {
+				remote-endpoint = <&comp0_out>;
+			};
+		};
+
+		/* Output port 2 is video output pad */
+		port@2 {
+			reg = <2>;
+			tvp5151_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
+
+	gpio_pca: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9539>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	/* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "ac97-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_h1_vbus>;
+	pinctrl-names = "default";
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28		0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
+			/* CAN2_SR */
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeygrp {
+		fsl,pins = <
+			/* nON_SWITCH */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* ITU656_nRESET */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02			0x1b0b0
+			/* CAM1_MIRROR */
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03			0x130b0
+			/* CAM2_MIRROR */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
+			/* CAM_nDETECT */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
+			/* ISB_IN1 */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
+			/* ISB_nIN2 */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21			0x1b0b0
+			/* WARN_LIGHT */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19			0x100b0
+			/* ON2_FB */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b0
+			/* YACO_nIRQ */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x1b0b0
+			/* YACO_BOOT0 */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0x130b0
+			/* YACO_nRESET */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x1b0b0
+			/* FORCE_ON1 */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
+			/* AUDIO_nRESET */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21		0x1f0b0
+			/* ITU656_nPDN */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
+
+			/* HW revision detect */
+			/* REV_ID0 */
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x1b0b0
+			/* REV_ID1 */
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09			0x1b0b0
+			/* REV_ID2 */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10			0x1b0b0
+			/* REV_ID3 */
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11			0x1b0b0
+			/* REV_ID4 */
+			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12			0x1b0b0
+
+			/* New in HW revision 1 */
+			/* ON1_FB */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
+			/* DIP1_FB */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			/* DEBUG0 */
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16		0x1b0b0
+			/* DEBUG1 */
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
+			/* POWER_LED */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
+		>;
+	};
+
+	pinctrl_pca9539: pca9539 {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
+		>;
+	};
+
+	/* YaCO AUX Uart */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
+		>;
+	};
+
+	/* YaCO Touchscreen UART */
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtrvt.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtrvt.dts
new file mode 100644
index 0000000000000..36b031236e475
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtrvt.dts
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic RVT board";
+	compatible = "prt,prtrvt", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	nfc@0 {
+		compatible = "ti,trf7970a";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nfc>;
+		spi-max-frequency = <2000000>;
+		interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>;
+		ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
+				  <&gpio5 11 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_3v3>;
+		autosuspend-delay = <30000>;
+		irq-status-read-quirk;
+		en2-rf-quirk;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* nc */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* nc */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_l */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_h */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&usbotg {
+	disable-over-current;
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			/* NFC_ASK_OOK */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x100b1
+			/* NFC_PWR_EN */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x100b1
+			/* NFC_EN2 */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x100b1
+			/* NFC_EN */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
+			/* NFC_MOD */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
+			/* NFC_IRQ */
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts
new file mode 100644
index 0000000000000..568e98cb62aaf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/display/sdtv-standards.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Protonic VT7";
+	compatible = "prt,prtvt7", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		brightness-levels = <0 20 81 248 1000>;
+		default-brightness-level = <65>;
+		num-interpolated-steps = <21>;
+		power-supply = <&reg_bl_12v0>;
+	};
+
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-0 = <&pinctrl_ipu1_disp>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-esc {
+			label = "GPIO Key ESC";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
+		};
+
+		key-up {
+			label = "GPIO Key UP";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
+		};
+
+		key-down {
+			label = "GPIO Key DOWN";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
+		};
+
+		key-enter {
+			label = "GPIO Key Enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
+		};
+
+		key-cycle {
+			label = "GPIO Key CYCLE";
+			linux,code = <KEY_CYCLEWINDOWS>;
+			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f1 {
+			label = "GPIO Key F1";
+			linux,code = <KEY_F1>;
+			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f2 {
+			label = "GPIO Key F2";
+			linux,code = <KEY_F2>;
+			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f3 {
+			label = "GPIO Key F3";
+			linux,code = <KEY_F3>;
+			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f4 {
+			label = "GPIO Key F4";
+			linux,code = <KEY_F4>;
+			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f5 {
+			label = "GPIO Key F5";
+			linux,code = <KEY_F5>;
+			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f6 {
+			label = "GPIO Key F6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f7 {
+			label = "GPIO Key F7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f8 {
+			label = "GPIO Key F8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f9 {
+			label = "GPIO Key F9";
+			linux,code = <KEY_F9>;
+			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f10 {
+			label = "GPIO Key F10";
+			linux,code = <KEY_F10>;
+			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel {
+		compatible = "innolux,g070y2-t02";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	connector {
+		compatible = "composite-video-connector";
+		label = "Composite0";
+		sdtv-standards = <SDTV_STD_PAL_B>;
+
+		port {
+			comp0_out: endpoint {
+				remote-endpoint = <&tvp5150_comp0_in>;
+			};
+		};
+	};
+
+	reg_bl_12v0: regulator-bl-12v0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_bl_12v0>;
+		regulator-name = "bl-12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_tsc>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+
+	video@5c {
+		compatible = "ti,tvp5150";
+		reg = <0x5c>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tvp5150_comp0_in: endpoint {
+				remote-endpoint = <&comp0_out>;
+			};
+		};
+
+		/* Output port 2 is video output pad */
+		port@2 {
+			reg = <2>;
+
+			tvp5151_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsens0: temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	gpio_pca: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&ipu1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			/* AUDIO_nRESET */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1f0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+			/* ITU656_nRESET */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			/* ITU656_nPDN */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15	   0xb0
+
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0
+
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0
+
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_bl_12v0: 12blgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
new file mode 100644
index 0000000000000..05fd8ff4da1ee
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for i.MX6DL based congatec QMX6
+// System on Module
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+// Copyright 2016 congatec AG
+
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+
+		i2c5: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c6: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+
+	mux-ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) |
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6)
+		>;
+	};
+
+	mux-aud6 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT6>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&clks {
+	clocks = <&rtc_sqw>;
+	clock-names = "ckil";
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf032b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0000000 0x100000>;
+		};
+
+		partition@100000 {
+			label = "user";
+			reg = <0x0100000 0x2fc000>;
+		};
+
+		partition@3fc000 {
+			label = "reserved";
+			reg = <0x03fc000 0x4000>;
+			read-only;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	fsl,magic-packet;
+	phy-handle = <&phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@6 {
+			reg = <6>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	rtc: m41t62@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+
+		rtc_sqw: clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&i2c6 {
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/*
+			 * keep VGEN3, VGEN4 and VGEN5 enabled in order to
+			 * maintain backward compatibility with hw-rev. A.0
+			 */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* supply voltage for eMMC */
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 20 0>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	/* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+};
+
+&usdhc2 {
+	/* MicroSD card slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	/* eMMC module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	qmx6mux: imx6qdl-qmx6 {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x110b0 /* Q7[67] HDA_SDO */
+				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x30b0 /* Q7[59] HDA_SYNC */
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x30b0 /* Q7[65] HDA_SDI */
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x30b0 /* Q7[63] HDA_BITCLK */
+			>;
+		};
+
+		/* PHY is on System on Module, Q7[3-15] have Ethernet lines */
+		pinctrl_enet: enet {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000 /* PCIE_WAKE_B */
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x80000000 /* I2C multiplexer */
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x80000000 /* SD4_CD# */
+				MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x80000000 /* SD4_WP */
+				MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x80000000 /* Camera MCLK */
+			>;
+		};
+
+		pinctrl_i2c1: i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1 /* Q7[66] I2C_CLK */
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1 /* Q7[68] I2C_DAT */
+			>;
+		};
+
+		pinctrl_i2c1_gpio: i2c1-gpio {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x1b0b0 /* Q7[66] I2C_CLK */
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b0 /* Q7[68] I2C_DAT */
+			>;
+		};
+
+		pinctrl_i2c2: i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2-gpio {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */
+				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */
+			>;
+		};
+
+		pinctrl_i2c3: i2c3 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1 /* Q7[60] SMB_CLK */
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1 /* Q7[62] SMB_DAT */
+			>;
+		};
+
+		pinctrl_i2c3_gpio: i2c3-gpio {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x1b0b0 /* Q7[60] SMB_CLK */
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0 /* Q7[62] SMB_DAT */
+			>;
+		};
+
+		pinctrl_phy_reset: phy-reset {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0 /* RGMII Phy Reset */
+			>;
+		};
+
+		pinctrl_pwm4: pwm4 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */
+			>;
+		};
+
+		pinctrl_q7_backlight_enable: q7-backlight-enable {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0 /* Q7[112] LVDS_BLEN */
+			>;
+		};
+
+		pinctrl_q7_gpio0: q7-gpio0 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0 /* Q7[185] GPIO0 */
+			>;
+		};
+
+		pinctrl_q7_gpio1: q7-gpio1 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0 /* Q7[186] GPIO1 */
+			>;
+		};
+
+		pinctrl_q7_gpio2: q7-gpio2 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b0 /* Q7[187] GPIO2 */
+			>;
+		};
+
+		pinctrl_q7_gpio3: q7-gpio3 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b0 /* Q7[188] GPIO3 */
+			>;
+		};
+
+		pinctrl_q7_gpio4: q7-gpio4 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* Q7[189] GPIO4 */
+			>;
+		};
+
+		pinctrl_q7_gpio5: q7-gpio5 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* Q7[190] GPIO5 */
+			>;
+		};
+
+		pinctrl_q7_gpio6: q7-gpio6 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0 /* Q7[191] GPIO6 */
+			>;
+		};
+
+		pinctrl_q7_gpio7: q7-gpio7 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* Q7[192] GPIO7 */
+			>;
+		};
+
+		pinctrl_q7_hda_reset: q7-hda-reset {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0 /* Q7[61] HDA_RST_N */
+			>;
+		};
+
+		pinctrl_q7_lcd_power: lcd-power {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* Q7[111] LVDS_PPEN */
+			>;
+		};
+
+		pinctrl_q7_sdio_power: q7-sdio-power {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b0 /* Q7[47] SDIO_PWR# */
+			>;
+		};
+
+		pinctrl_q7_sleep_button: q7-sleep-button {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0 /* Q7[21] SLP_BTN# */
+			>;
+		};
+
+		pinctrl_q7_spi_cs1: spi-cs1 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b0 /* Q7[202] SPI_CS1# */
+			>;
+		};
+
+		/* SPI1 bus does not leave System on Module */
+		pinctrl_spi1: spi1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+			>;
+		};
+
+		/* Debug connector on Q7 module */
+		pinctrl_uart2: uart2 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1 /* Q7[177] UART0_RX */
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1 /* Q7[171] UART0_TX */
+			>;
+		};
+
+		pinctrl_usbotg: usbotg {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059 /* Q7[92] USB_ID */
+			>;
+		};
+
+		/* µSD card slot on Q7 module */
+		pinctrl_usdhc2: usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0 /* SD2_CD */
+			>;
+		};
+
+		/* eMMC module on Q7 module */
+		pinctrl_usdhc3: usdhc3 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059 /* Q7[45] SDIO_CMD */
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x17059 /* Q7[42] SDIO_CLK */
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059 /* Q7[48] SDIO_DAT1 */
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059 /* Q7[49] SDIO_DAT0 */
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059 /* Q7[50] SDIO_DAT3 */
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059 /* Q7[51] SDIO_DAT2 */
+			>;
+		};
+
+		pinctrl_wdog: wdog {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0 /* Watchdog output signal */
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-rex-basic.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-rex-basic.dts
new file mode 100644
index 0000000000000..b72f8ea1e6f6c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-rex-basic.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-rex.dtsi"
+
+/ {
+	model = "Rex Basic i.MX6 Dual Lite Board";
+	compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
+
+&ecspi3 {
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
new file mode 100644
index 0000000000000..0366d1037ef4a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
@@ -0,0 +1,597 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 Iain Paton <ipaton0@gmail.com>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "RIoTboard i.MX6S";
+	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6-riotboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+			mux-int-port = <1>;
+			mux-ext-port = <3>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+			qca,smarteee-tw-us-1g = <24>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL",
+			"I2C3_SDA", "I2C4_SCL",
+		"I2C4_SDA", "", "", "", "", "", "", "",
+		"", "PWM3", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "USB_OTG_VBUS", "",
+		"UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
+		"GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
+			"CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
+		"CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
+			"CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06",
+			"GPIO5_07",
+		"GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
+			"CSPI2_CS0", "CSPI2_CLK", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"SD3_CD", "SD3_WP", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 8>;
+		fsl,pmic-stby-poweroff;
+
+		regulators {
+			reg_vddcore: sw1ab {				/* VDDARM_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_vddsoc: sw1c {				/* VDDSOC_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_gen_3v3: sw2 {				/* VDDHIGH_IN */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5a: sw3a {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5b: sw3b {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_vtt: sw4 {				/* MIPI conn */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_5v_600mA: swbst {				/* not used */
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			reg_snvs_3v: vsnvs {				/* VDD_SNVS_IN */
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {				/* VREF_DDR */
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1_1v5: vgen1 {				/* not used */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen2_1v2_eth: vgen2 {			/* pcie ? */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			reg_vgen3_2v8: vgen3 {				/* not used */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			reg_vgen4_1v8: vgen4 {				/* NVCC_SD3 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5_2v5_sgtl: vgen5 {			/* Pwr LED & 5V0_delayed enable */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6_3v3: vgen6 {				/* #V#_DELAYED enable, MIPI */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clocks = <&clks 116>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	imx6-riotboard {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x000b1		/* CS0 */
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x000b1		/* CS1 */
+				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1		/* CS0 */
+				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1		/* CS0 */
+				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x000b1		/* CS1 */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__I2C4_SCL             0x4001b8b1
+				MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* user led0 */
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* user led1 */
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* SD2 CD */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* SD2 WP */
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0	/* SD3 CD */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0	/* SD3 WP */
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x17059	/* SD4 RST (eMMC) */
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-sabreauto.dts
new file mode 100644
index 0000000000000..ff3283c83a394
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-sabreauto.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
+	compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
+};
+
+&cpu0 {
+	operating-points = <
+		/* kHz    uV */
+		996000  1275000
+		792000  1175000
+		396000  1150000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz  SOC-PU uV */
+		996000	1200000
+		792000	1175000
+		396000	1175000
+	>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-sabrelite.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-sabrelite.dts
new file mode 100644
index 0000000000000..33040761b253a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-sabrelite.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite SABRE Lite Board";
+	compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl";
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-sabresd.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-sabresd.dts
new file mode 100644
index 0000000000000..cd6bbf22a16f0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-sabresd.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
+	compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-savageboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-savageboard.dts
new file mode 100644
index 0000000000000..b95469c520a47
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-savageboard.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-savageboard.dtsi"
+
+/ {
+	model = "Poslab SavageBoard Dual";
+	compatible = "poslab,imx6dl-savageboard", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt2.dts
new file mode 100644
index 0000000000000..b12b5aabe70a7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt2.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+#include "imx6qdl-skov-revc-lt2.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU SoloCore";
+	compatible = "skov,imx6dl-skov-revc-lt2", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt6.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt6.dts
new file mode 100644
index 0000000000000..5dcc433fe2af5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt6.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU SoloCore";
+	compatible = "skov,imx6dl-skov-revc-lt6", "fsl,imx6dl";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l6wh-rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-solidsense.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-solidsense.dts
new file mode 100644
index 0000000000000..2a3699adbed00
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-solidsense.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-solidsense.dtsi"
+
+/ {
+	model = "SolidRun SolidSense Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,solidsense/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6a.dtsi
new file mode 100644
index 0000000000000..e891ef9b00918
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6a.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-tqma6a.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6b.dtsi
new file mode 100644
index 0000000000000..38cd8501a886d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6b.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-tqma6b.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-ts4900.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-ts4900.dts
new file mode 100644
index 0000000000000..3d60cc725d9e4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-ts4900.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-ts4900.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Solo/DualLite TS-4900 (Default Device Tree)";
+	compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-ts7970.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-ts7970.dts
new file mode 100644
index 0000000000000..5da6feba2e66a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-ts7970.dts
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2015 Technologic Systems
+ * Copyright 2017 Savoir-faire Linux
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-ts7970.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Solo/DualLite TS-7970 (Default Device Tree)";
+	compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts
new file mode 100644
index 0000000000000..51a9bb9d6bc28
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
+
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+	/delete-property/ turn-on-delay-ms;
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts
new file mode 100644
index 0000000000000..fc23b4d291a1b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6s-8034.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts
new file mode 100644
index 0000000000000..9eb2ef17339c7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8034 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&pinctrl_usdhc1 {
+	fsl,pins = <
+		MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
+		MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
+		MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
+		MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
+		MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
+		MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
+		MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
+	>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts
new file mode 100644
index 0000000000000..4101c6597721c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6s-8035.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts
new file mode 100644
index 0000000000000..a5532ecc18c5a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8035 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts
new file mode 100644
index 0000000000000..67ed0452f5de5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-801x Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts
new file mode 100644
index 0000000000000..d34189fc52d97
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-8033.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts
new file mode 100644
index 0000000000000..7030b2654bbd2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8033 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts
new file mode 100644
index 0000000000000..aef5fcc42904f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-801x.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts
new file mode 100644
index 0000000000000..5342f2f5a8a85
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-811x Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts
new file mode 100644
index 0000000000000..c4588fb0bf6fe
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-811x.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-udoo.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-udoo.dts
new file mode 100644
index 0000000000000..d871cac1711f7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-udoo.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-udoo.dtsi"
+
+/ {
+	model = "Udoo i.MX6 Dual-lite Board";
+	compatible = "udoo,imx6dl-udoo", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts
new file mode 100644
index 0000000000000..4875afadb6300
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+	model = "Kverneland TGO";
+	compatible = "kvg,victgo", "fsl,imx6dl";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		autorepeat;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-enter {
+			label = "Rotary Key";
+			gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			wakeup-source;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>;
+	};
+
+	panel {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-0 = <&pinctrl_rotary_ch>;
+		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>,
+			<&gpio2 4 GPIO_ACTIVE_HIGH>;
+		linux,axis = <REL_WHEEL>;
+		rotary-encoder,steps-per-period = <4>;
+		rotary-encoder,relative-axis;
+		rotary-encoder,rollover;
+		wakeup-source;
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
+
+	vdiv_hitch_pos: voltage-divider-hitch-pos {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 6>;
+		output-ohms = <3300>;
+		full-ohms = <13300>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&rmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+			"CAM2_MIRROR", "", "", "SMBALERT",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+			"SD1_DATA3", "ETH_MDIO", "",
+		"", "", "", "", "", "", "", "ETH_MDC";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
+			"CAN2_SR", "CAN2_TX", "CAN2_RX",
+		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+			"HITCH_IN_OUT",
+		"LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN",
+			"BL_PWM", "ETH_INT", "ISB_LED";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",
+			"ECSPI2_SS0", "ECSPI2_SCLK", "", "",
+		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
+			"I2S_BITCLK", "I2S_DOUT",
+		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
+			"ITU656_D6", "ITU656_D7", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	keypad@70 {
+		compatible = "holtek,ht16k33";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_keypad>;
+		reg = <0x70>;
+		refresh-rate-hz = <20>;
+		debounce-delay-ms = <50>;
+		interrupts-extended = <&gpio4 5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+		keypad,num-rows = <12>;
+		keypad,num-columns = <3>;
+		linux,keymap = <
+			MATRIX_KEY(2, 0, KEY_F6)
+			MATRIX_KEY(3, 0, KEY_F8)
+			MATRIX_KEY(4, 0, KEY_F10)
+			MATRIX_KEY(5, 0, KEY_F4)
+			MATRIX_KEY(6, 0, KEY_F2)
+			MATRIX_KEY(2, 1, KEY_F5)
+			MATRIX_KEY(3, 1, KEY_F7)
+			MATRIX_KEY(4, 1, KEY_F9)
+			MATRIX_KEY(5, 1, KEY_F3)
+			MATRIX_KEY(6, 1, KEY_F1)
+		      >;
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12		0x100b1
+			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK		0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeygrp {
+		fsl,pins = <
+			/* ROTARY_BTN */
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05			0x1b0b0
+			/* nON_SWITCH */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
+		>;
+	};
+
+	pinctrl_keypad: keypadgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
+		>;
+	};
+
+	pinctrl_rotary_ch: rotarychgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04			0x1b0b0
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-vicut1.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-vicut1.dts
new file mode 100644
index 0000000000000..5035d303447d4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-vicut1.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
+
+/ {
+	model = "Kverneland UT1 Board";
+	compatible = "kvg,vicut1", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revb1.dts
new file mode 100644
index 0000000000000..c2946fbaa0dd4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revb1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard-revb1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Dual Lite Board rev B1";
+	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revd1.dts
new file mode 100644
index 0000000000000..6d1d863c2e3a6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revd1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Dual Lite Board revD1";
+	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard.dts
new file mode 100644
index 0000000000000..4a08d5a994522
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard-revc1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Dual Lite Board";
+	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
new file mode 100644
index 0000000000000..3be38a3c4bb11
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases: aliases {
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 32 64 128 255>;
+		default-brightness-level = <32>;
+		num-interpolated-steps = <8>;
+		power-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		compatible = "dataimage,scf0700c48ggu18";
+		power-supply = <&sw2_reg>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&sw2_reg>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy_port2: phy@1 {
+			reg = <1>;
+		};
+
+		phy_port3: phy@2 {
+			reg = <2>;
+		};
+
+		switch@10 {
+			compatible = "qca,qca8334";
+			reg = <10>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethphy0: port@0 {
+					reg = <0>;
+					label = "cpu";
+					phy-mode = "rgmii-id";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				eth2: port@2 {
+					reg = <2>;
+					label = "eth2";
+					phy-handle = <&phy_port2>;
+				};
+
+				eth1: port@3 {
+					reg = <3>;
+					label = "eth1";
+					phy-handle = <&phy_port3>;
+				};
+			};
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze200";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vsnvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	leds: led-controller@30 {
+		compatible = "ti,lp5562";
+		reg = <0x30>;
+		clock-mode = /bits/ 8 <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		led@0 {
+			chan-name = "R";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			chan-name = "G";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			chan-name = "B";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <64>;
+	};
+
+	touchscreen: touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		status = "disabled";
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	oled_1309: oled@3c {
+		compatible = "solomon,ssd1309fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,segment-no-remap;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	oled_1305: oled@3d {
+		compatible = "solomon,ssd1305fb-i2c";
+		reg = <0x3d>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,col-offset = <4>;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_oled: gpio@41 {
+		compatible = "nxp,pca9536";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x41>;
+		vcc-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	touchkeys: keys@5a {
+		compatible = "fsl,mpr121-touchkey";
+		reg = <0x5a>;
+		vdd-supply = <&sw2_reg>;
+		autorepeat;
+		linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
+				<KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
+				<KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
+		poll-interval = <50>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b020
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b020
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b020
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b020
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b020
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b020
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b020
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b020
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b020
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b020
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b020
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b020
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b020
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b010
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b010
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b098
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1b898
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b899
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b098
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b098
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b098
+		>;
+	};
+
+	pinctrl_pcie_reg: pciereggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b098
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b098
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x8
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b098
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b098
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0a8
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0a8
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b098
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x98
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b098
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b098
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x98
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22	0x1b018
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x1b018
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x1f069
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x10069
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17069
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17069
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17069
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17069
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17069
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17069
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17069
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17069
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "disabled";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	over-current-active-low;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+	status = "okay";
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <109>;
+	status = "disabled";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&sw2_reg>;
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-draco.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-draco.dts
new file mode 100644
index 0000000000000..a38c407fd8370
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-draco.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Draco i.MX6Solo board";
+	compatible = "ysoft,imx6dl-yapp4-draco", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcd_display {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchscreen {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-hydra.dts
new file mode 100644
index 0000000000000..a19609c7c7c0e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-hydra.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Hydra i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-hydra", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&reg_pcie {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts
new file mode 100644
index 0000000000000..5c2cd517589bf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Lynx i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-lynx", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcd_display {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchscreen {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-orion.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-orion.dts
new file mode 100644
index 0000000000000..884b236746bb0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-orion.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2020 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Orion i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-orion", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-phoenix.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-phoenix.dts
new file mode 100644
index 0000000000000..e0292f11d03ec
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-phoenix.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Phoenix i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-phoenix", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&aliases {
+	/delete-property/ ethernet1;
+};
+
+&gpio_keys {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&switch_ports {
+	/delete-node/ port@2;
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-ursa.dts
new file mode 100644
index 0000000000000..f6ae24efd4aa2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-ursa.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Ursa i.MX6Solo board";
+	compatible = "ysoft,imx6dl-yapp4-ursa", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
+
+&aliases {
+	/delete-property/ ethernet1;
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcd_display {
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&switch_ports {
+	/delete-node/ port@3;
+};
+
+&touchscreen {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi
new file mode 100644
index 0000000000000..52a0f6ee426f9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases: aliases {
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 32 64 128 255>;
+		default-brightness-level = <32>;
+		num-interpolated-steps = <8>;
+		power-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		button {
+			label = "Factory RESET";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		compatible = "dataimage,scf0700c48ggu18";
+		power-supply = <&sw2_reg>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&sw2_reg>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethphy0: port@0 {
+					reg = <0>;
+					label = "cpu";
+					phy-mode = "rgmii-id";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				eth2: port@1 {
+					reg = <1>;
+					label = "eth2";
+					phy-handle = <&phy_port1>;
+				};
+
+				eth1: port@2 {
+					reg = <2>;
+					label = "eth1";
+					phy-handle = <&phy_port2>;
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port1: switchphy@11 {
+					reg = <0x11>;
+				};
+
+				phy_port2: switchphy@12 {
+					reg = <0x12>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze200";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vsnvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	leds: led-controller@30 {
+		compatible = "ti,lp5562";
+		reg = <0x30>;
+		clock-mode = /bits/ 8 <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		led@0 {
+			chan-name = "R";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			chan-name = "G";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			chan-name = "B";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <64>;
+	};
+
+	touchscreen: touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		status = "disabled";
+	};
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+
+	oled_1309: oled@3c {
+		compatible = "solomon,ssd1309fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,segment-no-remap;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	oled_1305: oled@3d {
+		compatible = "solomon,ssd1305fb-i2c";
+		reg = <0x3d>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,col-offset = <4>;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_oled: gpio@41 {
+		compatible = "nxp,pca9536";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x41>;
+		vcc-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	touchkeys: keys@5a {
+		compatible = "fsl,mpr121-touchkey";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchkeys>;
+		reg = <0x5a>;
+		vdd-supply = <&sw2_reg>;
+		autorepeat;
+		linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
+				<KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
+				<KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
+		poll-interval = <50>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b020
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b020
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b020
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b020
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b020
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b020
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b020
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b020
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b020
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b020
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b020
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b020
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b020
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b010
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b010
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b098
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b899
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07                  0x1b0b0
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b098
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x8
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b098
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b098
+		>;
+	};
+
+	pinctrl_touchkeys: touchkeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b098
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b098
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0a8
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0a8
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b098
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x98
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b098
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b098
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x98
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x1f069
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x10069
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17069
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17069
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17069
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17069
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17069
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17069
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17069
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17069
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	over-current-active-low;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+	status = "okay";
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <109>;
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl.dtsi
new file mode 100644
index 0000000000000..dc919e09a505f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl.dtsi
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl-pinfunc.h"
+#include "imx6qdl.dtsi"
+
+/ {
+	aliases {
+		i2c3 = &i2c4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				996000	1175000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				996000	1175000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	soc: soc {
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		aips1: bus@2000000 {
+			pxp: pxp@20f0000 {
+				reg = <0x020f0000 0x4000>;
+				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epdc: epdc@20f4000 {
+				reg = <0x020f4000 0x4000>;
+				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aips2: bus@2100000 {
+			i2c4: i2c@21f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6DL_CLK_I2C4>;
+				status = "disabled";
+			};
+		};
+	};
+
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu1_csi0>, <&ipu1_csi1>;
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu1_di0>, <&ipu1_di1>;
+	};
+};
+
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 131 2>, <&iomuxc  2 137 8>, <&iomuxc 10 189 2>,
+		      <&iomuxc 12 194 1>, <&iomuxc 13 193 1>, <&iomuxc 14 192 1>,
+		      <&iomuxc 15 191 1>, <&iomuxc 16 185 2>, <&iomuxc 18 184 1>,
+		      <&iomuxc 19 187 1>, <&iomuxc 20 183 1>, <&iomuxc 21 188 1>,
+		      <&iomuxc 22 123 3>, <&iomuxc 25 121 1>, <&iomuxc 26 127 1>,
+		      <&iomuxc 27 126 1>, <&iomuxc 28 128 1>, <&iomuxc 29 130 1>,
+		      <&iomuxc 30 129 1>, <&iomuxc 31 122 1>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 161 8>, <&iomuxc  8 208 8>, <&iomuxc 16  74 1>,
+		      <&iomuxc 17  73 1>, <&iomuxc 18  72 1>, <&iomuxc 19  71 1>,
+		      <&iomuxc 20  70 1>, <&iomuxc 21  69 1>, <&iomuxc 22  68 1>,
+		      <&iomuxc 23  79 2>, <&iomuxc 25 118 2>, <&iomuxc 27 117 1>,
+		      <&iomuxc 28 113 4>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc  0 97  2>, <&iomuxc 2 105 8>, <&iomuxc 10 99 6>,
+		      <&iomuxc 16 81 16>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc  5 136 1>, <&iomuxc  6 145 1>, <&iomuxc  7 150 1>,
+		      <&iomuxc  8 146 1>, <&iomuxc  9 151 1>, <&iomuxc 10 147 1>,
+		      <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
+		      <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16  39 7>,
+		      <&iomuxc 23  56 1>, <&iomuxc 24  61 7>, <&iomuxc 31  46 1>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc  0 120 1>, <&iomuxc  2 77 1>, <&iomuxc  4 76 1>,
+		      <&iomuxc  5  47 9>, <&iomuxc 14 57 4>, <&iomuxc 18 37 1>,
+		      <&iomuxc 19  36 1>, <&iomuxc 20 35 1>, <&iomuxc 21 38 1>,
+		      <&iomuxc 22  29 6>, <&iomuxc 28 19 4>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0  23 6>, <&iomuxc  6  75 1>, <&iomuxc  7 156 1>,
+		      <&iomuxc  8 155 1>, <&iomuxc  9 170 1>, <&iomuxc 10 169 1>,
+		      <&iomuxc 11 157 1>, <&iomuxc 14 158 3>, <&iomuxc 17 204 1>,
+		      <&iomuxc 18 203 1>, <&iomuxc 19 182 1>, <&iomuxc 20 177 4>,
+		      <&iomuxc 24 175 1>, <&iomuxc 25 171 1>, <&iomuxc 26 181 1>,
+		      <&iomuxc 27 172 3>, <&iomuxc 30 176 1>, <&iomuxc 31  78 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 202 1>, <&iomuxc  1 201 1>, <&iomuxc  2 196 1>,
+		      <&iomuxc 3 195 1>, <&iomuxc  4 197 4>, <&iomuxc  8 205 1>,
+		      <&iomuxc 9 207 1>, <&iomuxc 10 206 1>, <&iomuxc 11 133 3>;
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu1_csi0_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu1_csi0_mux_from_mipi_vc1: endpoint {
+				remote-endpoint = <&mipi_vc1_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu1_csi0_mux_from_mipi_vc2: endpoint {
+				remote-endpoint = <&mipi_vc2_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			ipu1_csi0_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@5 {
+			reg = <5>;
+
+			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+			};
+		};
+	};
+
+	ipu1_csi1_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu1_csi1_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu1_csi1_mux_from_mipi_vc1: endpoint {
+				remote-endpoint = <&mipi_vc1_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu1_csi1_mux_from_mipi_vc2: endpoint {
+				remote-endpoint = <&mipi_vc2_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			ipu1_csi1_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+
+			ipu1_csi1_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@5 {
+			reg = <5>;
+
+			ipu1_csi1_mux_to_ipu1_csi1: endpoint {
+				remote-endpoint = <&ipu1_csi1_from_ipu1_csi1_mux>;
+			};
+		};
+	};
+};
+
+&gpt {
+	compatible = "fsl,imx6dl-gpt";
+};
+
+&hdmi {
+	compatible = "fsl,imx6dl-hdmi";
+};
+
+&iomuxc {
+	compatible = "fsl,imx6dl-iomuxc";
+};
+
+&ipu1_csi1 {
+	ipu1_csi1_from_ipu1_csi1_mux: endpoint {
+		remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>;
+	};
+};
+
+&ldb {
+	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel",
+		      "di0", "di1";
+};
+
+&mipi_csi {
+	port@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc0_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+		};
+
+		mipi_vc0_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>;
+		};
+	};
+
+	port@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc1_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>;
+		};
+
+		mipi_vc1_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>;
+		};
+	};
+
+	port@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc2_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>;
+		};
+
+		mipi_vc2_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc3_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>;
+		};
+
+		mipi_vc3_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>;
+		};
+	};
+};
+
+&mux {
+	mux-reg-masks = <0x34 0x00000007>, /* IPU_CSI0_MUX */
+			<0x34 0x00000038>, /* IPU_CSI1_MUX */
+			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
+			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
+			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
+			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
+			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
+};
+
+&vpu {
+	compatible = "fsl,imx6dl-vpu", "cnm,coda960";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
new file mode 100644
index 0000000000000..3fc079dfd61ee
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board";
+	compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_pcie_switch: regulator-pcie-switch {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "pcie_switch";
+		startup-delay-us = <100000>;
+		status = "okay";
+	};
+
+	reg_3v3_sw: regulator-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SW";
+	};
+};
+
+&can1 {
+	xceiver-supply = <&reg_3v3_sw>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3_sw>;
+	status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	pcie-switch@58 {
+		compatible = "plx,pex8605";
+		reg = <0x58>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	vpcie-supply = <&reg_pcie_switch>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.1.dts
new file mode 100644
index 0000000000000..44637d606e612
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.1.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+#include "imx6q-apalis-ixora-v1.2.dts"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
+	compatible = "toradex,apalis_imx6q-ixora-v1.1", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+
+};
+
+/delete-node/ &eeprom;
+/delete-node/ &reg_3v3_vmmc;
+/delete-node/ &reg_can1_supply;
+/delete-node/ &reg_can2_supply;
+
+&can1 {
+	/delete-property/ xceiver-supply;
+};
+
+&can2 {
+	/delete-property/ xceiver-supply;
+};
+
+/* MMC1 */
+&usdhc1 {
+	/delete-property/ cap-power-off-card;
+	/delete-property/ pinctrl-1;
+	/delete-property/ vmmc-supply;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
new file mode 100644
index 0000000000000..717decda0cebd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.2";
+	compatible = "toradex,apalis_imx6q-ixora-v1.2", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		led4-green {
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_GREEN";
+		};
+
+		led4-red {
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_RED";
+		};
+
+		led5-green {
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_GREEN";
+		};
+
+		led5-red {
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_RED";
+		};
+	};
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+		startup-delay-us = <100>;
+	};
+
+	reg_can1_supply: regulator-can1-supply {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		regulator-name = "can1_supply";
+	};
+
+	reg_can2_supply: regulator-can2-supply {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can2_power>;
+		regulator-name = "can2_supply";
+	};
+};
+
+&can1 {
+	xceiver-supply = <&reg_can1_supply>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_can2_supply>;
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart24_forceoff>;
+
+	/*
+	 * uart-2-4-on-x21-enable-hog enables the UART transceiver for Apalis
+	 * UART2 and UART3. If one wants to disable the transceiver force
+	 * the GPIO to output-low, if one wants to control the transceiver
+	 * from user space delete the hog node.
+	 */
+	uart-2-4-on-x21-enable-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>; /* MXM3 180 */
+		output-high;
+	};
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_4bit_sleep &pinctrl_mmc_cd_sleep>;
+	bus-width = <4>;
+	cap-power-off-card;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can2_power: enablecan2powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart24_forceoff: uart24forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0
+		>;
+	};
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_mmc_cd_sleep: mmccdslpgrp {
+		fsl,pins = <
+			 /* MMC1 CD */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0
+		>;
+	};
+
+	pinctrl_usdhc1_4bit_sleep: usdhc1-4bitslpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD     0x3000
+			MX6QDL_PAD_SD1_CLK__SD1_CLK     0x3000
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0  0x3000
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1  0x3000
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2  0x3000
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3  0x3000
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts
new file mode 100644
index 0000000000000..f338be4352779
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board";
+	compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		led4-green {
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_GREEN";
+		};
+
+		led4-red {
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_RED";
+		};
+
+		led5-green {
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_GREEN";
+		};
+
+		led5-red {
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_RED";
+		};
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apf6dev.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apf6dev.dts
new file mode 100644
index 0000000000000..664b0af8f0bbd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apf6dev.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-apf6.dtsi"
+#include "imx6qdl-apf6dev.dtsi"
+
+/ {
+	model = "Armadeus APF6 Quad / Dual Module on APF6Dev Board";
+	compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts
new file mode 100644
index 0000000000000..75586299d9cab
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Armadillo2 Board";
+	compatible = "fsl,imx6q-arm2", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		debug-led {
+			label = "Heartbeat";
+			gpios = <&gpio3 25 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "disabled"; /* gpmi nand conflicts with SD */
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-arm2 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
+				MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_cdwp: usdhc3cdwp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
+		     &pinctrl_usdhc3_cdwp>;
+	status = "okay";
+};
+
+&usdhc4 {
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts
new file mode 100644
index 0000000000000..d994b32ad825c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts
@@ -0,0 +1,157 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B450v3";
+	compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "", "SM_D_ACT", "DP1_RST#", "",
+			  "WD15S_EN", "WD15S_DIS#", "", "",
+			  "", "", "", "";
+
+	P04-hog {
+		gpio-hog;
+		gpios = <4 0>;
+		output-low;
+		line-name = "PCA9539-P04";
+	};
+
+	P07-hog {
+		gpio-hog;
+		gpios = <7 0>;
+		output-low;
+		line-name = "PCA9539-P07";
+	};
+};
+
+&pci_root {
+	/* Intel Corporation I210 Gigabit Network Connection */
+	switch_nic: ethernet@3,0 {
+		compatible = "pci8086,1533";
+		reg = <0x00010000 0 0 0 0>;
+	};
+};
+
+&switch_ports {
+	port@0 {
+		reg = <0>;
+		label = "enacq";
+		phy-handle = <&switchphy0>;
+	};
+
+	port@1 {
+		reg = <1>;
+		label = "eneport1";
+		phy-handle = <&switchphy1>;
+	};
+
+	port@2 {
+		reg = <2>;
+		label = "enix";
+		phy-handle = <&switchphy2>;
+	};
+
+	port@3 {
+		reg = <3>;
+		label = "enid";
+		phy-handle = <&switchphy3>;
+	};
+
+	port@4 {
+		reg = <4>;
+		label = "cpu";
+		ethernet = <&switch_nic>;
+		phy-handle = <&switchphy4>;
+	};
+
+	port@5 {
+		reg = <5>;
+		label = "enembc";
+
+		/* connected to Ethernet MAC of AT91RM9200 in MII mode */
+		fixed-link {
+			speed = <100>;
+			full-duplex;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts
new file mode 100644
index 0000000000000..fa1a1df37cde1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B650v3";
+	compatible = "ge,imx6q-b650v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "", "SM_D_ACT", "DP1_RST#", "",
+			  "WD15S_EN", "WD15S_DIS#", "", "",
+			  "", "", "", "";
+
+	P07-hog {
+		gpio-hog;
+		gpios = <7 0>;
+		output-low;
+		line-name = "PCA9539-P07";
+	};
+};
+
+&usbphy1 {
+	fsl,tx-cal-45-dn-ohms = <55>;
+	fsl,tx-cal-45-dp-ohms = <55>;
+	fsl,tx-d-cal = <100>;
+};
+
+&pci_root {
+	/* Intel Corporation I210 Gigabit Network Connection */
+	switch_nic: ethernet@3,0 {
+		compatible = "pci8086,1533";
+		reg = <0x00010000 0 0 0 0>;
+	};
+};
+
+&switch_ports {
+	port@0 {
+		reg = <0>;
+		label = "enacq";
+		phy-handle = <&switchphy0>;
+	};
+
+	port@1 {
+		reg = <1>;
+		label = "eneport1";
+		phy-handle = <&switchphy1>;
+	};
+
+	port@2 {
+		reg = <2>;
+		label = "enix";
+		phy-handle = <&switchphy2>;
+	};
+
+	port@3 {
+		reg = <3>;
+		label = "enid";
+		phy-handle = <&switchphy3>;
+	};
+
+	port@4 {
+		reg = <4>;
+		label = "cpu";
+		ethernet = <&switch_nic>;
+		phy-handle = <&switchphy4>;
+	};
+
+	port@5 {
+		reg = <5>;
+		label = "enembc";
+
+		/* connected to Ethernet MAC of AT91RM9200 in MII mode */
+		fixed-link {
+			speed = <100>;
+			full-duplex;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
new file mode 100644
index 0000000000000..db8c332df6a1d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
@@ -0,0 +1,295 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B850v3";
+	compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&stdp4028_in>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pca9547_ddc: mux@70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux2_i2c1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		mux2_i2c2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		mux2_i2c3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		mux2_i2c4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		mux2_i2c5: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		mux2_i2c6: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		mux2_i2c7: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+
+		mux2_i2c8: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&mux2_i2c1>;
+};
+
+&mux1_i2c1 {
+	ads7830@4a {
+		compatible = "ti,ads7830";
+		reg = <0x4a>;
+	};
+};
+
+&mux2_i2c2 {
+	clock-frequency = <100000>;
+
+	stdp2690@72 {
+		compatible = "megachips,stdp2690-ge-b850v3-fw";
+		reg = <0x72>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				stdp2690_in: endpoint {
+					remote-endpoint = <&stdp4028_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				stdp2690_out: endpoint {
+					/* Connector for external display */
+				};
+			};
+		};
+	};
+
+	stdp4028@73 {
+		compatible = "megachips,stdp4028-ge-b850v3-fw";
+		reg = <0x73>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				stdp4028_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				stdp4028_out: endpoint {
+					remote-endpoint = <&stdp2690_in>;
+				};
+			};
+		};
+	};
+};
+
+&pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "REMOTE_ON_PML#", "SM_D_ACT", "DP1_RST#", "DP2_RST#",
+			  "", "", "", "",
+			  "", "", "", "";
+
+	P10-hog {
+		gpio-hog;
+		gpios = <8 0>;
+		output-low;
+		line-name = "PCA9539-P10";
+	};
+
+	P11-hog {
+		gpio-hog;
+		gpios = <9 0>;
+		output-low;
+		line-name = "PCA9539-P11";
+	};
+};
+
+&pci_root {
+	/* PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch */
+	bridge@1,0 {
+		compatible = "pci10b5,8605";
+		reg = <0x00010000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+
+		bridge@2,1 {
+			compatible = "pci10b5,8605";
+			reg = <0x00020800 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			/* Intel Corporation I210 Gigabit Network Connection */
+			ethernet@3,0 {
+				compatible = "pci8086,1533";
+				reg = <0x00030000 0 0 0 0>;
+			};
+		};
+
+		bridge@2,2 {
+			compatible = "pci10b5,8605";
+			reg = <0x00021000 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			/* Intel Corporation I210 Gigabit Network Connection */
+			switch_nic: ethernet@4,0 {
+				compatible = "pci8086,1533";
+				reg = <0x00040000 0 0 0 0>;
+			};
+		};
+	};
+};
+
+&switch_ports {
+	port@0 {
+		reg = <0>;
+		label = "eneport1";
+		phy-handle = <&switchphy0>;
+	};
+
+	port@1 {
+		reg = <1>;
+		label = "eneport2";
+		phy-handle = <&switchphy1>;
+	};
+
+	port@2 {
+		reg = <2>;
+		label = "enix";
+		phy-handle = <&switchphy2>;
+	};
+
+	port@3 {
+		reg = <3>;
+		label = "enid";
+		phy-handle = <&switchphy3>;
+	};
+
+	port@4 {
+		reg = <4>;
+		label = "cpu";
+		ethernet = <&switch_nic>;
+		phy-handle = <&switchphy4>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
new file mode 100644
index 0000000000000..f266f1b7e0cfc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
@@ -0,0 +1,661 @@
+/*
+ * Support for imx6 based Advantech DMS-BA16 Qseven module
+ *
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_display>;
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
+				      10  11  12  13  14  15  16  17  18  19
+				      20  21  22  23  24  25  26  27  28  29
+				      30  31  32  33  34  35  36  37  38  39
+				      40  41  42  43  44  45  46  47  48  49
+				      50  51  52  53  54  55  56  57  58  59
+				      60  61  62  63  64  65  66  67  68  69
+				      70  71  72  73  74  75  76  77  78  79
+				      80  81  82  83  84  85  86  87  88  89
+				      90  91  92  93  94  95  96  97  98  99
+				     100 101 102 103 104 105 106 107 108 109
+				     110 111 112 113 114 115 116 117 118 119
+				     120 121 122 123 124 125 126 127 128 129
+				     130 131 132 133 134 135 136 137 138 139
+				     140 141 142 143 144 145 146 147 148 149
+				     150 151 152 153 154 155 156 157 158 159
+				     160 161 162 163 164 165 166 167 168 169
+				     170 171 172 173 174 175 176 177 178 179
+				     180 181 182 183 184 185 186 187 188 189
+				     190 191 192 193 194 195 196 197 198 199
+				     200 201 202 203 204 205 206 207 208 209
+				     210 211 212 213 214 215 216 217 218 219
+				     220 221 222 223 224 225 226 227 228 229
+				     230 231 232 233 234 235 236 237 238 239
+				     240 241 242 243 244 245 246 247 248 249
+				     250 251 252 253 254 255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_lvds: regulator-lvds {
+		compatible = "regulator-fixed";
+		regulator-name = "lvds_ppen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usbh1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x10000>;
+		};
+
+		partition@d0000 {
+			label = "spare";
+			reg = <0xd0000 0x320000>;
+		};
+
+		partition@3f0000 {
+			label = "mfg";
+			reg = <0x3f0000 0x10000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_3p3v>;
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+		};
+
+		regulators {
+			vdd_bcore1: bcore1 {
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1420000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bcore2: bcore2 {
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1420000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bpro: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bmem: bmem {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bio: bio {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bperi: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1860000>;
+			};
+
+			vdd_ldo2: ldo2 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1860000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3440000>;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3440000>;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo8: ldo8 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo11: ldo11 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8010";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	fsl,tx-swing-full = <103>;
+	fsl,tx-swing-low = <103>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
+	bus-width = <8>;
+	vmmc-supply = <&vdd_bperi>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_display: dispgrp {
+		fsl,pins = <
+			/* BLEN_OUT */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00    0x1b0b0
+			/* LVDS_PPEN_OUT */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
+			/* SPI1 CS */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x1b0b0
+			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x1b0b0
+			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x1b0b0
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			/* FEC Reset */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x1b0b0
+			/* AR8033 Interrupt */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05        0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* GPIO 0-7 */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00  0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01  0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02  0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03  0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04  0x1b0b0
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05  0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06  0x1b0b0
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07  0x1b0b0
+			/* SUS_S3_OUT to CPLD */
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* PCIe Reset */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+			/* PCIe Wake */
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC Interrupt */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			/* RTC_INT */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			/* HUB_RESET */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK	0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0	0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1	0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2	0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3	0x17059
+			/* uSDHC2 CD */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_reset: usdhc3grp-reset {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__SD3_RESET   0x170F9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x17059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17059
+			/* uSDHC4 CD */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
+			/* uSDHC4 SDIO PWR */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
+			/* uSDHC4 SDIO WP */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+			/* uSDHC4 SDIO LED */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts
new file mode 100644
index 0000000000000..8263bfef9bf85
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for the i.MX6-based Bosch ACC board.
+ *
+ * Copyright (C) 2016 Garz & Fricke GmbH
+ * Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie <lusus@denx.de>
+ * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com>
+ * Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Bosch ACC";
+	compatible = "bosch,imx6q-acc", "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc4;
+		mmc1 = &usdhc2;
+		serial0 = &uart2;
+		serial1 = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 200000>;
+		brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
+		num-interpolated-steps = <10>;
+		default-brightness-level = <60>;
+		power-supply = <&reg_lcd>;
+	};
+
+	panel {
+		compatible = "dataimage,fg1001l0dsswmg01";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	refclk: refclk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "12mhz_refclk";
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO2>,
+				  <&clks IMX6QDL_CLK_CKO2_SEL>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>,
+					 <&clks IMX6QDL_CLK_CKO2_PODF>,
+					 <&clks IMX6QDL_CLK_OSC>;
+		assigned-clock-rates = <0>, <12000000>, <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1225000
+				852000  1225000
+				792000  1150000
+				396000  950000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1225000
+				996000	1175000
+				852000	1175000
+				792000	1150000
+				396000	1150000
+			>;
+		};
+
+		cpu1: cpu@1 {
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1225000
+				852000  1225000
+				792000  1150000
+				396000  950000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1225000
+				996000	1175000
+				852000	1175000
+				792000	1150000
+				396000	1150000
+			>;
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led_red: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			max-brightness = <248>;
+			default-state = "off";
+			pwms = <&pwm2 0 500000>;
+		};
+
+		led_white: led-1 {
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <248>;
+			default-state = "off";
+			pwms = <&pwm3 0 500000>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reset_gpio_led>;
+
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_5p0: regulator-5p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5p0";
+	};
+
+	reg_vin: regulator-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN";
+		regulator-min-microvolt = <4500000>;
+		regulator-max-microvolt = <4500000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_usb_h2_vbus: regulator-usb-h2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5p0> ;
+		regulator-always-on;
+	};
+
+	reg_vsnvs: regulator-vsnvs {
+		compatible = "regulator-fixed";
+		regulator-name = "VSNVS_3V0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0 POWER";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_enable>;
+		gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_dac: regulator-dac {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_dac";
+		regulator-min-microvolt = <20000>;
+		regulator-max-microvolt = <20000>;
+		vin-supply = <&reg_5p0> ;
+		regulator-boot-on;
+	};
+
+	reg_sw4: regulator-sw4 {
+		compatible = "regulator-fixed";
+		regulator-name = "SW4_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_sys: regulator-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "SYS_4V2";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+};
+
+&reg_arm {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&reg_vdd3p0 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
+	phy-mode = "rmii";
+	phy-supply = <&reg_sw4>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+			smsc,disable-energy-detect;
+		};
+	};
+};
+
+&gpu_vg {
+	status = "disabled";
+};
+
+&gpu_2d {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1c_reg: sw1c {
+				regulator-name = "VDD_SOC (sw1abc)";
+				regulator-min-microvolt = <1275000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "VDD_ARM (sw2)";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				compatible = "regulator-fixed";
+				regulator-name = "DDR_1V5a";
+				regulator-boot-on;
+				regulator-always-on;
+
+			};
+
+			sw3b_reg: sw3b {
+				compatible = "regulator-fixed";
+				regulator-name = "DDR_1V5b";
+				regulator-boot-on;
+				regulator-always-on;
+
+			};
+
+			sw4_reg: sw4 {
+				regulator-name = "AUX 3V15 (sw4)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+				status = "disabled";
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	lm75: sensor@49 {
+		compatible = "national,lm75b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lm75>;
+		reg = <0x49>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@51 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom_ext: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	usb3503: usb@8 {
+		compatible = "smsc,usb3503";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb3503>;
+		reg = <0x08>;
+		connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */
+		intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */
+		initial-mode = <1>;
+		clocks = <&refclk>;
+		clock-names = "refclk";
+		refclk-frequency = <12000000>;
+	};
+
+	exc3000: touchscreen@2a {
+		compatible = "eeti,exc3000";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctouch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+	};
+
+	vcnl4035: light-sensor@60 {
+		compatible = "vishay,vcnl4035";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_proximity>;
+		reg = <0x60>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "idle", "active";
+	pinctrl-0 = <&pinctrl_usbh2_idle>;
+	pinctrl-1 = <&pinctrl_usbh2_active>;
+	vbus-supply = <&reg_usb_h2_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphynop1 {
+	clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+	clock-names = "main_clk";
+	vcc-supply = <&reg_usb_h1_vbus>;
+};
+
+&usbphynop2 {
+	vcc-supply = <&reg_usb_h2_vbus>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	voltage-ranges = <3300 3300>;
+	vmmc-supply = <&reg_sw4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	voltage-ranges = <3300 3300>;
+	vmmc-supply = <&reg_sw4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+	timeout-sec = <10>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0	/* FEC INT */
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x0001b098
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x0001b098
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x0001b098
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_reset_gpio_led: reset-gpio-led-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_lcd_enable: lcdenablegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x1b0b0 /* lcd enable */
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x1b0b0 /* sel6_8 */
+		>;
+	};
+
+	pinctrl_lm75: lm75grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_proximity: proximitygrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */
+		>;
+	};
+
+	pinctrl_ctouch: ctouch-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh2_idle: usbh2-idle-grp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
+			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018
+		>;
+	};
+
+	pinctrl_usbh2_active: usbh2-active-grp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
+			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018
+		>;
+	};
+
+	pinctrl_usb3503: usb3503-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1    0x00000018
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12     0x1b0b0 /* USB INT */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16    0x1b0b0 /* USB Connect */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017069
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00010038
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069
+			MX6QDL_PAD_GPIO_4__SD2_CD_B    0x0001b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x00017059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x00010059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059
+		>;
+	};
+
+	pinctrl_wdog1: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
new file mode 100644
index 0000000000000..ead83091e193a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
@@ -0,0 +1,409 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q-ba16.dtsi"
+
+/ {
+	mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <22000000>;
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V_wlan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ba16-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-ba16-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	mdio0: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch: switch@0 {
+			compatible = "marvell,mv88e6085"; /* 88e6240*/
+			reg = <0>;
+
+			interrupt-parent = <&gpio2>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switchphy0: switchphy@0 {
+					reg = <0>;
+					interrupt-parent = <&switch>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy1: switchphy@1 {
+					reg = <1>;
+					interrupt-parent = <&switch>;
+					interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy2: switchphy@2 {
+					reg = <2>;
+					interrupt-parent = <&switch>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy3: switchphy@3 {
+					reg = <3>;
+					interrupt-parent = <&switch>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy4: switchphy@4 {
+					reg = <4>;
+					interrupt-parent = <&switch>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+	};
+};
+
+&ecspi5 {
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	status = "okay";
+
+	m25_eeprom: flash@0 {
+		compatible = "atmel,at25";
+		spi-max-frequency = <10000000>;
+		size = <0x8000>;
+		pagesize = <64>;
+		reg = <0>;
+		address-width = <16>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	pca9547: mux@70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux1_i2c1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ads7830: ads7830@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+
+			mma8453: mma8453@1c {
+				compatible = "fsl,mma8453";
+				reg = <0x1c>;
+			};
+		};
+
+		mux1_i2c2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c08";
+				reg = <0x50>;
+			};
+
+			mpl3115: mpl3115@60 {
+				compatible = "fsl,mpl3115";
+				reg = <0x60>;
+			};
+		};
+
+		mux1_i2c3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		mux1_i2c4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			sgtl5000: codec@a {
+				compatible = "fsl,sgtl5000";
+				reg = <0x0a>;
+				clocks = <&mclk>;
+				VDDA-supply = <&reg_1p8v>;
+				VDDIO-supply = <&reg_3p3v>;
+			};
+		};
+
+		mux1_i2c5: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			pca9539: pca9539@74 {
+				compatible = "nxp,pca9539";
+				reg = <0x74>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio2>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+				P12-hog {
+					gpio-hog;
+					gpios = <10 0>;
+					output-low;
+					line-name = "PCA9539-P12";
+				};
+
+				P13-hog {
+					gpio-hog;
+					gpios = <11 0>;
+					output-low;
+					line-name = "PCA9539-P13";
+				};
+
+				P14-hog {
+					gpio-hog;
+					gpios = <12 0>;
+					output-low;
+					line-name = "PCA9539-P14";
+				};
+
+				P15-hog {
+					gpio-hog;
+					gpios = <13 0>;
+					output-low;
+					line-name = "PCA9539-P15";
+				};
+
+				P16-hog {
+					gpio-hog;
+					gpios = <14 0>;
+					output-low;
+					line-name = "PCA9539-P16";
+				};
+
+				P17-hog {
+					gpio-hog;
+					gpios = <15 0>;
+					output-low;
+					line-name = "PCA9539-P17";
+				};
+			};
+		};
+
+		mux1_i2c6: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		mux1_i2c7: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+
+		mux1_i2c8: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&iomuxc {
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x1b0b0
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
+		>;
+	};
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&usdhc2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&pcie {
+	/* Synopsys, Inc. Device */
+	pci_root: root@0,0 {
+		compatible = "pci16c3,abcd";
+		reg = <0x00000000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts
new file mode 100644
index 0000000000000..ffb3b8eeae5db
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts
@@ -0,0 +1,491 @@
+/*
+ * Copyright 2013 CompuLab Ltd.
+ *
+ * Author: Valentin Raevsky <valentin@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "CompuLab CM-FX6";
+	compatible = "compulab,cm-fx6", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat-led {
+			label = "Heartbeat";
+			gpios = <&gpio2 31 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	awnh387_pwrseq: pwrseq {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwrseq>;
+		compatible = "mmc-pwrseq-sd8787";
+		powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-pcie-power-on-gpio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_h1_vbus: usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: usb_otg_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound-analog {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board analog audio";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"MICIN", "Mic Bias",
+			"Mic Bias", "Mic Jack";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound_master: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+			system-clock-frequency = <2822400>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8731>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+		spdif-in;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_RCLKDIR |
+			IMX_AUDMUX_V2_PTCR_RCSEL(3 | 0x8) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(3))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(3)
+		>;
+	};
+
+	mux-audmux4 {
+		fsl,audmux-port = <3>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(1) |
+			IMX_AUDMUX_V2_PTCR_RCLKDIR |
+			IMX_AUDMUX_V2_PTCR_RCSEL(1 | 0x8) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(1))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&cpu0 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&cpu1 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&cpu2 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&cpu3 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	wm8731: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8731";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__AUD4_RXC   0x17059
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD  0x17059
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC  0x17059
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD  0x17059
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x17059
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwrseq: pwrseqgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x130b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_power_on_gpio>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi2 {
+	assigned-clocks = <&clks IMX6QDL_CLK_SSI2_SEL>,
+			<&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <786432000>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	mmc-pwrseq = <&awnh387_pwrseq>;
+	non-removable;
+	/*
+	 * If the OS probes the Bluetooth AMP function advertised on this bus
+	 * but the firmware in place does not support it, the WiFi/BT module
+	 * gets unresponsive.
+	 * Users who configured their OS properly can enable this node to gain
+	 * WiFi and/or plain Bluetooth support.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-emmc-som-v15.dts
new file mode 100644
index 0000000000000..3e59ebbb36086
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-emmc-som-v15.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-som-v15.dts
new file mode 100644
index 0000000000000..dab70d1230a29
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-som-v15.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Dual/Quad (1.5som)";
+	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i.dts
new file mode 100644
index 0000000000000..1c7b262e37094
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Dual/Quad";
+	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dfi-fs700-m60.dts
new file mode 100644
index 0000000000000..8bfe6337cd650
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dfi-fs700-m60.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
+ */
+
+#ifndef __DTS_V1__
+#define __DTS_V1__
+/dts-v1/;
+#endif
+
+#include "imx6q.dtsi"
+#include "imx6qdl-dfi-fs700-m60.dtsi"
+
+/ {
+	model = "DFI FS700-M60-6QD i.MX6qd Q7 Board";
+	compatible = "dfi,fs700-m60-6qd", "dfi,fs700e-m60", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dts
new file mode 100644
index 0000000000000..d4d57370615d8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2021 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6Q-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCOM PCB number: 493-300 or newer
+ * PDK2 PCB number: 516-400 or newer
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-pdk2.dtsi"
+
+/ {
+	model = "DH electronics i.MX6Q DHCOM on Premium Developer Kit (2)";
+	compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som",
+		     "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
new file mode 100644
index 0000000000000..16658b76fc4e8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-display5.dtsi"
+
+&panel {
+	compatible = "tianma,tm070jdhg30";
+};
+
+&ldb {
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
new file mode 100644
index 0000000000000..4ab31f2217cdb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
@@ -0,0 +1,596 @@
+/*
+ * Copyright 2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Liebherr (LWN) display5 i.MX6 Quad Board";
+	compatible = "lwn,display5", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
+				      10  11  12  13  14  15  16  17  18  19
+				      20  21  22  23  24  25  26  27  28  29
+				      30  31  32  33  34  35  36  37  38  39
+				      40  41  42  43  44  45  46  47  48  49
+				      50  51  52  53  54  55  56  57  58  59
+				      60  61  62  63  64  65  66  67  68  69
+				      70  71  72  73  74  75  76  77  78  79
+				      80  81  82  83  84  85  86  87  88  89
+				      90  91  92  93  94  95  96  97  98  99
+				     100 101 102 103 104 105 106 107 108 109
+				     110 111 112 113 114 115 116 117 118 119
+				     120 121 122 123 124 125 126 127 128 129
+				     130 131 132 133 134 135 136 137 138 139
+				     140 141 142 143 144 145 146 147 148 149
+				     150 151 152 153 154 155 156 157 158 159
+				     160 161 162 163 164 165 166 167 168 169
+				     170 171 172 173 174 175 176 177 178 179
+				     180 181 182 183 184 185 186 187 188 189
+				     190 191 192 193 194 195 196 197 198 199
+				     200 201 202 203 204 205 206 207 208 209
+				     210 211 212 213 214 215 216 217 218 219
+				     220 221 222 223 224 225 226 227 228 229
+				     230 231 232 233 234 235 236 237 238 239
+				     240 241 242 243 244 245 246 247 248 249
+				     250 251 252 253 254 255>;
+		default-brightness-level = <250>;
+		enable-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_lvds: regulator-lvds {
+		compatible = "regulator-fixed";
+		regulator-name = "lvds_ppen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lvds>;
+		gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbh1_vbus: usb-h1-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-enable-ramp-delay = <300000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		label = "tfa9879-mono";
+
+		simple-audio-card,dai-link {
+			/* DAC */
+			format = "i2s";
+			bitclock-master = <&dailink_master>;
+			frame-master = <&dailink_master>;
+
+			dailink_master: cpu {
+			    sound-dai = <&ssi2>;
+			};
+			codec {
+			    sound-dai = <&codec>;
+			};
+		};
+	};
+
+	panel: panel-lvds0 {
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(5) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(5) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(5)
+		>;
+	};
+
+	mux-aud6 {
+		fsl,audmux-port = <5>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_RFSEL(8) |
+			 IMX_AUDMUX_V2_PTCR_RCSEL(8) |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(1) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(1) |
+			 IMX_AUDMUX_V2_PTCR_RFSDIR |
+			 IMX_AUDMUX_V2_PTCR_RCLKDIR |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs &pinctrl_ecspi2_flwp>;
+	status = "okay";
+
+	s25fl256s: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "SPL (spi)";
+			reg = <0x0 0x20000>;
+			read-only;
+		};
+		partition@1 {
+			label = "u-boot (spi)";
+			reg = <0x20000 0x100000>;
+			read-only;
+		};
+		partition@2 {
+			label = "uboot-env (spi)";
+			reg = <0x120000 0x10000>;
+		};
+		partition@3 {
+			label = "uboot-envr (spi)";
+			reg = <0x130000 0x10000>;
+		};
+		partition@4 {
+			label = "linux-recovery (spi)";
+			reg = <0x140000 0x800000>;
+		};
+		partition@5 {
+			label = "swupdate-fitImg (spi)";
+			reg = <0x940000 0x400000>;
+		};
+		partition@6 {
+			label = "swupdate-initramfs (spi)";
+			reg = <0xD40000 0x800000>;
+		};
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethernet_phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethernet_phy0: ethernet-phy@0 {
+			compatible = "marvell,88E1510";
+			device_type = "ethernet-phy";
+			/* Set LED0 control: */
+			/* On - Link, Blink - Activity, Off - No Link */
+			marvell,reg-init = <3 0x10 0 0x1011>;
+			max-speed = <100>;
+			reg = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: tfa9879@6c {
+		#sound-dai-cells = <0>;
+		compatible = "nxp,tfa9879";
+		reg = <0x6C>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			/* I2S OUTPUT AUD6*/
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD  0x130b0
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD  0x130b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS  0x130b0
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC  0x130b0
+		>;
+	};
+
+	pinctrl_backlight: dispgrp {
+		fsl,pins = <
+			/* BLEN_OUT */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07    0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi2_flwp: ecspi2flwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi3_cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3_flwp: ecspi3flwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_lvds: reqlvdsgrp {
+		fsl,pins = <
+			/* LVDS_PPEN_OUT */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13      0x1b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA    0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC  0x030b0
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1_vbus_grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
new file mode 100644
index 0000000000000..3815cb660ff79
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
@@ -0,0 +1,481 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Data Modul AG
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Data Modul eDM-QMX6 Board";
+	compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		gpio7 = &stmpe_gpio1;
+		gpio8 = &stmpe_gpio2;
+		stmpe-i2c0 = &stmpe1;
+		stmpe-i2c1 = &stmpe2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_switch: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg_switch";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 12 0>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		reg_usb_host1: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_host1_en";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 31 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "blue";
+			gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-pink {
+			label = "pink";
+			gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-red {
+			label = "red";
+			gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&ecspi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vgen2_1v2_eth>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2
+		     &pinctrl_stmpe1
+		     &pinctrl_stmpe2
+		     &pinctrl_pfuze>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_1v2_eth: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vdd_high_in: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	stmpe1: stmpe1601@40 {
+		compatible = "st,stmpe1601";
+		reg = <0x40>;
+		interrupts = <30 0>;
+		interrupt-parent = <&gpio3>;
+		vcc-supply = <&sw2_reg>;
+		vio-supply = <&sw2_reg>;
+
+		stmpe_gpio1: stmpe_gpio {
+			#gpio-cells = <2>;
+			compatible = "st,stmpe-gpio";
+		};
+	};
+
+	stmpe2: stmpe1601@44 {
+		compatible = "st,stmpe1601";
+		reg = <0x44>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpio5>;
+		vcc-supply = <&sw2_reg>;
+		vio-supply = <&sw2_reg>;
+
+		stmpe_gpio2: stmpe_gpio {
+			#gpio-cells = <2>;
+			compatible = "st,stmpe-gpio";
+		};
+	};
+
+	temp1: ad7414@4c {
+		compatible = "ad,ad7414";
+		reg = <0x4c>;
+	};
+
+	temp2: ad7414@4d {
+		compatible = "ad,ad7414";
+		reg = <0x4d>;
+	};
+
+	rtc: m41t62@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-dmo-edmqmx6 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
+				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi5: ecspi5rp-1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x80000000
+				MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x80000000
+				MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x80000000
+				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x80000000
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x100b1
+			>;
+		};
+
+		pinctrl_pfuze: pfuze100grp1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x80000000
+			>;
+		};
+
+		pinctrl_stmpe1: stmpe1grp {
+			fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
+		};
+
+		pinctrl_stmpe2: stmpe2grp {
+			fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host1>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
new file mode 100644
index 0000000000000..137db38f0d27b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q-ba16.dtsi"
+
+/ {
+	model = "Advantech DMS-BA16";
+	compatible = "advantech,imx6q-dms-ba16", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <22000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ba16-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-ba16-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&ecspi5 {
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	status = "okay";
+
+	m25_eeprom: flash@0 {
+		compatible = "atmel,at25256B", "atmel,at25";
+		spi-max-frequency = <20000000>;
+		size = <0x8000>;
+		pagesize = <64>;
+		reg = <0>;
+		address-width = <16>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26        0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03   0x1b0b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotgvbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sys_mclk>;
+		lrclk-strength = <0x3>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&sata {
+	fsl,no-spread-spectrum;
+	fsl,transmit-atten-16ths = <12>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-level-mV = <1133>;
+	fsl,receive-dpll-mode = <1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-ds.dts b/arch/arm/boot/dts/nxp/imx/imx6q-ds.dts
new file mode 100644
index 0000000000000..b0a63a1339778
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ds.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2021 Dillon Min <dillon.minfei@gmail.com>
+//
+// Based on imx6qdl-sabresd.dtsi which is:
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-ds.dtsi"
+
+/ {
+	model = "DaSheng i.MX6 Quad Com-9xx Board";
+	compatible = "ds,imx6q-sbc", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-emcon-avari.dts b/arch/arm/boot/dts/nxp/imx/imx6q-emcon-avari.dts
new file mode 100644
index 0000000000000..0f582a9d4c0e6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-emcon-avari.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-emcon.dtsi"
+#include "imx6qdl-emcon-avari.dtsi"
+
+/ {
+	model = "emtrion SoM emCON-MX6 Dual/Quad on Avari";
+	compatible = "emtrion,emcon-mx6-avari", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts
new file mode 100644
index 0000000000000..78d941fef5dfb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts
@@ -0,0 +1,518 @@
+/*
+ * Copyright 2016 United Western Technologies.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Uniwest Evi";
+	compatible = "uniwest,imx6q-evi", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usbh1_vbus: regulator-usbhubreset {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		startup-delay-us = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_hubreset>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	panel {
+		compatible = "sharp,lq101k1ly04";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
+	status = "okay";
+
+	fpga: fpga@0 {
+		compatible = "altr,fpga-passive-serial";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_fpgaspi>;
+		nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+		nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
+		<&gpio4 25 GPIO_ACTIVE_LOW>,
+		<&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3cs>;
+	status = "okay";
+};
+
+&ecspi5 {
+	cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
+		<&gpio1 13 GPIO_ACTIVE_LOW>,
+		<&gpio1 12 GPIO_ACTIVE_LOW>,
+		<&gpio2 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>;
+	status = "okay";
+
+	eeprom: m95m02@1 {
+		compatible = "st,m95m02", "atmel,at25";
+		size = <262144>;
+		pagesize = <256>;
+		address-width = <24>;
+		spi-max-frequency = <5000000>;
+		reg = <1>;
+	};
+
+	pb_rtc: rtc@3 {
+		compatible = "nxp,rtc-pcf2123";
+		spi-max-frequency = <2450000>;
+		spi-cs-high;
+		reg = <3>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpminand>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	clock-frequency = <100000>;
+	scl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	battery: sbs-battery@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,poll-retry-count = <100>;
+		sbs,i2c-retry-count = <100>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	ranges = <0 0 0x08000000 0x08000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* pwr mcu alert irq */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+			/* remainder ???? */
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x10068
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x10068
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x1f068
+		>;
+	};
+
+	pinctrl_ecspi3cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK 0x100b1
+			MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI 0x100b1
+			MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi5cs: ecspi5csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+		>;
+	};
+
+	pinctrl_fpgaspi: fpgaspigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpminand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001b8b1
+		>;
+	};
+
+	pinctrl_weimcs: weimcsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1
+		>;
+	};
+
+	pinctrl_weimfpga: weimfpgagrp {
+		fsl,pins = <
+			/* weim misc */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
+			MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0b1
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0b1
+			MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0xb0b1
+			MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0xb0b1
+			MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0xb0b1
+			MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0xb0b1
+			/* weim data */
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0
+			MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
+			MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
+			MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
+			MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
+			MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
+			MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
+			MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
+			MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
+			MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
+			MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
+			MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
+			MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
+			MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
+			MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
+			MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
+			MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
+			/* weim address */
+			MX6QDL_PAD_EIM_A25__EIM_ADDR25 0xb0b1
+			MX6QDL_PAD_EIM_A24__EIM_ADDR24 0xb0b1
+			MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
+			MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
+			MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
+			MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
+			MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x1b0b1
+			MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0
+			/* usbh1_b OC */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbh1_hubreset: usbh1hubresetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotgvbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts
new file mode 100644
index 0000000000000..2fda68f9d3f64
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Philipp Zabel
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Zealz GK802";
+	compatible = "zealz,imx6q-gk802", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		recovery-button {
+			label = "recovery";
+			gpios = <&gpio3 16 1>;
+			linux,code = <KEY_RESTART>;
+			wakeup-source;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+/* Internal I2C */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* SDMC DM2016 1024 bit EEPROM + 128 bit OTP */
+	eeprom: dm2016@51 {
+		compatible = "sdmc,dm2016";
+		reg = <0x51>;
+	};
+};
+
+/* External I2C via HDMI */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-gk802 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* Recovery button, active-low */
+				MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x100b1
+				/* RTL8192CU enable GPIO, active-low */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* External USB-A port (USBOTG) */
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Internal USB port (USBH1), connected to RTL8192CU */
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* External microSD */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* Internal microSD */
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw51xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw51xx.dts
new file mode 100644
index 0000000000000..f80173458e3f1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw51xx.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW51XX";
+	compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts
new file mode 100644
index 0000000000000..6e1c493c9c8c4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW52XX";
+	compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu2_csi1_mux: endpoint {
+				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu2_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu2_csi1: ipu2_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts
new file mode 100644
index 0000000000000..f13df8e9c8c4b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW53XX";
+	compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu2_csi1_mux: endpoint {
+				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu2_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu2_csi1: ipu2_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
new file mode 100644
index 0000000000000..0ba802b891b5b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
@@ -0,0 +1,510 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Gateworks Ventana GW5400-A";
+	compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
+
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		ssi0 = &ssi1;
+		spi0 = &ecspi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: led-user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "sst,w25q256", "jedec,spi-nor";
+		spi-max-frequency = <30000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&sw4_reg>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>;
+		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ldb {
+	status = "okay";
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0 /* SPINOR_CS0# */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0 /* user1 led */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0 /* user2 led */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* user3 led */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0 /* GPS_PPS */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts
new file mode 100644
index 0000000000000..d5d46908cf6ed
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+#include <dt-bindings/media/tda1997x.h>
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
+	compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
+
+	sound-digital {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tda1997x-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&hdmi_receiver>;
+		};
+	};
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu2_csi1_mux: endpoint {
+				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+
+	hdmi_receiver: hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&sw4_reg>;
+		DVDD-supply = <&sw4_reg>;
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+		 * and Y[11:4] across 16bits in the same cycle
+		 * which we map to VP[15:08]<->CSI_DATA[19:12]
+		 */
+		nxp,vidout-portcfg =
+			/*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
+			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+			/*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
+			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+			/*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
+			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+			/*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
+			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <16>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
+	bus-width = <16>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu2_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1_csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu2_csi1: ipu2_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+
+	pinctrl_tda1997x: tda1997xgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts
new file mode 100644
index 0000000000000..2c7feeef1b0e0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW551X";
+	compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw552x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw552x.dts
new file mode 100644
index 0000000000000..c973b73042254
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw552x.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2014 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw552x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW552X";
+	compatible = "gw,imx6q-gw552x", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts
new file mode 100644
index 0000000000000..e9c224cea7522
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
+	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts
new file mode 100644
index 0000000000000..735f2bbf14397
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW560X";
+	compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts
new file mode 100644
index 0000000000000..a182e4cb0e6ec
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5903";
+	compatible = "gw,imx6q-gw5903", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts
new file mode 100644
index 0000000000000..ca1e2ae3341ec
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5904";
+	compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5907.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5907.dts
new file mode 100644
index 0000000000000..b25526ef58861
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5907";
+	compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5910.dts
new file mode 100644
index 0000000000000..6aafa2fcee08a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5910";
+	compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5912.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5912.dts
new file mode 100644
index 0000000000000..4dcbd943cd935
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5912";
+	compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5913.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5913.dts
new file mode 100644
index 0000000000000..6f511f1665fd7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5913";
+	compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
new file mode 100644
index 0000000000000..3fe4591e21f57
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
@@ -0,0 +1,382 @@
+/*
+ * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+
+/ {
+	model = "Auvidea H100";
+	compatible = "auvidea,h100", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	hdmi_osc: hdmi-osc {
+		compatible = "fixed-clock";
+		clock-output-names = "hdmi-osc";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_leds>;
+
+		led0: led-power {
+			label = "power";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led1: led-stream {
+			label = "stream";
+			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2: led-rec {
+			label = "rec";
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_hdmi: regulator-hdmi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		regulator-name = "V_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
+		regulator-name = "USB_H1_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
+		regulator-name = "USB_OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound-sgtl5000 {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "H100 on-board codec";
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-ext-port = <5>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c1>;
+	status = "okay";
+
+	eeprom: eeprom@51 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	rtc: pcf8523@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	tc358743: tc358743@f {
+		compatible = "toshiba,tc358743";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_tc358743>;
+		clocks = <&hdmi_osc>;
+		clock-names = "refclk";
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+		/* IRQ has a wrong pull resistor which renders it useless  */
+
+		port {
+			tc358743_out: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				data-lanes = <1 2 3 4>;
+				clock-lanes = <0>;
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <297000000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	h100 {
+		pinctrl_h100_hdmi: h100-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_h100_i2c1: h100-i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_h100_i2c2: h100-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_h100_leds: pinctrl-h100-leds {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_reg_hdmi: h100-reg-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_sgtl5000: h100-sgtl5000 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
+			>;
+		};
+
+		pinctrl_h100_tc358743: h100-tc358743 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_uart2: h100-uart2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+			>;
+		};
+
+		pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usdhc2: h100-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+			>;
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port {
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&tc358743_out>;
+			data-lanes = <1 2 3 4>;
+			clock-lanes = <0>;
+			clock-noncontinuous;
+			link-frequencies = /bits/ 64 <297000000>;
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_h100_usdhc2>;
+	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-emmc-som-v15.dts
new file mode 100644
index 0000000000000..c51b4e4fd71e0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-emmc-som-v15.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-som-v15.dts
new file mode 100644
index 0000000000000..e4132d62ffa2f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-som-v15.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad (1.5som)";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard.dts
new file mode 100644
index 0000000000000..8c9e94e648a7b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-emmc-som-v15.dts
new file mode 100644
index 0000000000000..1998ebfa0fe01
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-emmc-som-v15.dts
@@ -0,0 +1,63 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-som-v15.dts
new file mode 100644
index 0000000000000..d3ad7329cd6da
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-som-v15.dts
@@ -0,0 +1,62 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Dual/Quad (1.5som)";
+	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2.dts
new file mode 100644
index 0000000000000..5249f53dcdbcf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-hummingboard2-emmc.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Dual/Quad";
+	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-icore-mipi.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-mipi.dts
new file mode 100644
index 0000000000000..d51745268dbf2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-mipi.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2017 Engicam S.r.l.
+ * Copyright (C) 2017 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 1.5 Quad/Dual MIPI Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+};
+
+&ov5640 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts
new file mode 100644
index 0000000000000..02aca1e28ce3f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+	panel {
+		compatible = "ampire,am-1280800n3tzqw-t00h";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts
new file mode 100644
index 0000000000000..241811c52b624
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+	panel {
+		compatible = "koe,tx31d200vm0baa";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		reg = <0>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-icore-rqs.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-rqs.dts
new file mode 100644
index 0000000000000..cf6ba724f4979
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-rqs.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ * Copyright (C) 2015 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-icore.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore.dts
new file mode 100644
index 0000000000000..fe28c3cf54c03
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c1 {
+	max11801: touchscreen@48 {
+		compatible = "maxim,max11801";
+		reg = <0x48>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <60000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <30>;
+				hfront-porch = <30>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <64>;
+				vsync-len = <20>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi
new file mode 100644
index 0000000000000..4d6a0c3e8455f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Kontron SMARC sAMX6i Quad/Dual";
+	compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
+};
+
+/* Quad/Dual SoMs have 3 chip-select signals */
+&ecspi4 {
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
+		   <&gpio3 29 GPIO_ACTIVE_LOW>,
+		   <&gpio3 25 GPIO_ACTIVE_LOW>;
+};
+
+&pinctrl_ecspi4 {
+	fsl,pins = <
+		MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+		MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+		MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+
+		/* SPI4_IMX_CS2# - connected to internal flash */
+		MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
+		/* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
+		MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+		/* SPI4_CS3# - connected to  SMARC SPI0_CS1# */
+		MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
+	>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kp-tpc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-kp-tpc.dts
new file mode 100644
index 0000000000000..50fbf46d17c29
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kp-tpc.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q-kp.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Qwuad K+P TPC Board";
+	compatible = "kiebackpeter,imx6q-tpc", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
new file mode 100644
index 0000000000000..091903f53a560
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <250>;
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 500000>;
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "auo,g070vvn01";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_display>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-green {
+			label = "led1";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		led-red {
+			label = "led0";
+			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "sgtl5000-supply";
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_display: regulator-display {
+		compatible = "regulator-fixed";
+		regulator-name = "display-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6q-sgtl5000-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	ds1307: rtc@32 {
+		compatible = "dallas,ds1307";
+		reg = <0x32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS	0x130b0
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31   0x1b0b0
+			/* sgtl5000 sys_mclk clock routed to CLKO1 */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC	0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0	0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1	0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2	0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3	0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC	0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0	0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1	0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2	0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3	0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+		>;
+	};
+
+	pinctrl_flexcan1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX        0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX        0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		 >;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B         0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B         0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-logicpd.dts b/arch/arm/boot/dts/nxp/imx/imx6q-logicpd.dts
new file mode 100644
index 0000000000000..46a4ddedb4236
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-logicpd.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6-logicpd-som.dtsi"
+#include "imx6-logicpd-baseboard.dtsi"
+
+/ {
+	model = "Logic PD i.MX6QD SOM-M3";
+	compatible = "logicpd,imx6q-logicpd", "fsl,imx6q";
+
+	backlight: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 20000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&reg_lcd>;
+	};
+
+	panel-lvds0 {
+		compatible = "okaya,rs800480t-7x0gp";
+		power-supply = <&reg_lcd_reset>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_lcd: regulator-lcd {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_reg>;
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_panel_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+		startup-delay-us = <500000>;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_reset>;
+		compatible = "regulator-fixed";
+		regulator-name = "nLCD_RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_lcd>;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	touchscreen@26 {
+		compatible = "ilitek,ili2117";
+		reg = <0x26>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&reg_hdmi {
+	regulator-always-on;	/* Without this, the level shifter on HDMI doesn't turn on */
+};
+
+&iomuxc {
+	pinctrl_lcd_reg: lcdreg {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x100b0	/* R_LCD_PANEL_PWR */
+		>;
+	};
+
+	pinctrl_lcd_reset: lcdreset {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x100b0	/* LCD_nRESET */
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0	/* TOUCH_nPINTDAV */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-marsboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-marsboard.dts
new file mode 100644
index 0000000000000..2c9961333b0a8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-marsboard.dts
@@ -0,0 +1,417 @@
+/*
+ * Copyright (C) 2016 Sergio Prado (sergio.prado@e-labworks.com)
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Embest MarS Board i.MX6Dual";
+	compatible = "embest,imx6q-marsboard", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user1 {
+			label = "imx6:green:user1";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			label = "imx6:green:user2";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0	/* CAM_MCLK */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000b1	/* CS0 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+			/* AR8035 pin strapping: IO voltage: pull up */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			/* AR8035 pin strapping: PHYADDR#0: pull down */
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+			/* AR8035 pin strapping: PHYADDR#1: pull down */
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			/* AR8035 pin strapping: MODE#1: pull up */
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			/* AR8035 pin strapping: MODE#3: pull up */
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			/* AR8035 pin strapping: MODE#0: pull down */
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+			/* GPIO16 -> AR8035 25MHz */
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			/* RGMII_nRST */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0
+			/* AR8035 interrupt */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* LED1 */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* LED2 */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* USB OTG POWER ENABLE */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* WP */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17009
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10009
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17009
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17009
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17009
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17009
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x17009
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-mba6.dtsi
new file mode 100644
index 0000000000000..0d7be45672916
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mba6.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&ecspi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5_mba6x>;
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+};
+
+&ethphy {
+	rxdv-skew-ps = <180>;
+	txen-skew-ps = <120>;
+	rxd3-skew-ps = <180>;
+	rxd2-skew-ps = <180>;
+	rxd1-skew-ps = <180>;
+	rxd0-skew-ps = <180>;
+	txd3-skew-ps = <120>;
+	txd2-skew-ps = <0>;
+	txd1-skew-ps = <180>;
+	txd0-skew-ps = <360>;
+	txc-skew-ps = <1860>;
+	rxc-skew-ps = <1860>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi5_mba6x: ecspi5grp-mba6x {
+		fsl,pins = <
+			/* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
+			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b099
+			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0xb099
+			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0xb099
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0xb099 /* eCSPI5 SS0 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dts
new file mode 100644
index 0000000000000..349a08605a5e8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6Q on MBa6x";
+	compatible = "tq,imx6q-mba6x-a", "tq,mba6a",
+		     "tq,imx6q-tqma6q-a", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mba6b.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mba6b.dts
new file mode 100644
index 0000000000000..02c9f3e91b8fb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mba6b.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6Q on MBa6x";
+	compatible = "tq,imx6q-mba6x-b", "tq,mba6b",
+		     "tq,imx6q-tqma6q-b", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
new file mode 100644
index 0000000000000..f08b370102915
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016-2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Liebherr (LWN) monitor6 i.MX6 Quad Board";
+	compatible = "lwn,mccmon6", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 5000000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
+				      10  11  12  13  14  15  16  17  18  19
+				      20  21  22  23  24  25  26  27  28  29
+				      30  31  32  33  34  35  36  37  38  39
+				      40  41  42  43  44  45  46  47  48  49
+				      50  51  52  53  54  55  56  57  58  59
+				      60  61  62  63  64  65  66  67  68  69
+				      70  71  72  73  74  75  76  77  78  79
+				      80  81  82  83  84  85  86  87  88  89
+				      90  91  92  93  94  95  96  97  98  99
+				     100 101 102 103 104 105 106 107 108 109
+				     110 111 112 113 114 115 116 117 118 119
+				     120 121 122 123 124 125 126 127 128 129
+				     130 131 132 133 134 135 136 137 138 139
+				     140 141 142 143 144 145 146 147 148 149
+				     150 151 152 153 154 155 156 157 158 159
+				     160 161 162 163 164 165 166 167 168 169
+				     170 171 172 173 174 175 176 177 178 179
+				     180 181 182 183 184 185 186 187 188 189
+				     190 191 192 193 194 195 196 197 198 199
+				     200 201 202 203 204 205 206 207 208 209
+				     210 211 212 213 214 215 216 217 218 219
+				     220 221 222 223 224 225 226 227 228 229
+				     230 231 232 233 234 235 236 237 238 239
+				     240 241 242 243 244 245 246 247 248 249
+				     250 251 252 253 254 255>;
+		default-brightness-level = <50>;
+		enable-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_lvds: regulator-lvds {
+		compatible = "regulator-fixed";
+		regulator-name = "lvds_ppen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lvds>;
+		gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
+	status = "okay";
+
+	s25sl032p: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x02000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		use-advanced-sector-protection;
+		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+				0x0000c000 0x1404a38e 0x00000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_backlight: dispgrp {
+		fsl,pins = <
+			/* BLEN_OUT */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02    0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi3_cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000
+		>;
+	};
+
+	pinctrl_ecspi3_flwp: ecspi3flwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x80000000
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_lvds: reqlvdsgrp {
+		fsl,pins = <
+			/* LVDS_PPEN_OUT */
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19         0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04           0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x17059
+		>;
+	};
+
+	pinctrl_weim_cs0: weimcs0grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_nor: weimnorgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B	0xb060
+			MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+			MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+			MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+			MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+			MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+			MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+			MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+			MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+			MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+			MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+			MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+			MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+			MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+			MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+			MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+			MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+			MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+			MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+			MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+			MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+			MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_max.dts
new file mode 100644
index 0000000000000..03bec0c530637
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_max.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board";
+	compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_som2.dts
new file mode 100644
index 0000000000000..eb4eecb6ed221
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_som2.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_som2.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen6_SOM2 Board";
+	compatible = "boundary,imx6q-nitrogen6_som2", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6x.dts
new file mode 100644
index 0000000000000..435445a34ad02
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen6x Board";
+	compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
new file mode 100644
index 0000000000000..a7d5a68110fcf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
@@ -0,0 +1,803 @@
+/*
+ * Copyright 2015 Sutajio Ko-Usagi PTE LTD
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kosagi Novena Dual/Quad";
+	compatible = "kosagi,imx6q-novena", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 10000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_novena>;
+		power-supply = <&reg_lvds_lcd>;
+		brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>;
+		default-brightness-level = <12>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys_novena>;
+
+		user-button {
+			label = "User Button";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		lid-event {
+			label = "Lid";
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0>;	/* SW_LID */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_novena>;
+
+		led-heartbeat {
+			label = "novena:white:panel";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,n133hse-ea1";
+		backlight = <&backlight>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_audio_codec: regulator-audio-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "es8328-power";
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <400000>;
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_display: regulator-display {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-display-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+		gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds_lcd: regulator-lvds-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-lvds-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie-bus-power";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sata: regulator-sata {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-power";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <10000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-es8328";
+		model = "imx-audio-es8328";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-amp-supply = <&reg_audio_codec>;
+		jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Speaker", "LOUT2",
+			"Speaker", "ROUT2",
+			"Speaker", "audio-amp",
+			"Headphone", "ROUT1",
+			"Headphone", "LOUT1",
+			"LINPUT1", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		mux-int-port = <0x1>;
+		mux-ext-port = <0x3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_novena>;
+	status = "okay";
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3_novena>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_novena>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			rxc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			txen-skew-ps = <0>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <3000>;
+			txd1-skew-ps = <3000>;
+			txd2-skew-ps = <3000>;
+			txd3-skew-ps = <3000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_novena>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_novena>;
+	status = "okay";
+
+	accel: mma8452@1c {
+		compatible = "fsl,mma8452";
+		reg = <0x1c>;
+	};
+
+	rtc: pcf8523@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sbs_battery: bq20z75@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,i2c-retry-count = <50>;
+	};
+
+	touch: stmpe811@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe_novena>;
+		vio-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_novena>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			reg_sw1a: sw1a {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			reg_sw1c: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw2: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw3a: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw3b: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw4: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_swbst: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+			};
+
+			reg_snvs: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vref: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen2: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen3: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_vgen4: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_novena>;
+	status = "okay";
+
+	codec: es8328@11 {
+		compatible = "everest,es8328";
+		reg = <0x11>;
+		DVDD-supply = <&reg_audio_codec>;
+		AVDD-supply = <&reg_audio_codec>;
+		PVDD-supply = <&reg_audio_codec>;
+		HPVDD-supply = <&reg_audio_codec>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sound_novena>;
+		clocks = <&clks IMX6QDL_CLK_CKO1>;
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO1_SEL>,
+				  <&clks IMX6QDL_CLK_PLL4_AUDIO>,
+				  <&clks IMX6QDL_CLK_CKO1>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>,
+					 <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>,
+					 <&clks IMX6QDL_CLK_OSC>,
+					 <&clks IMX6QDL_CLK_CKO1_PODF>;
+		assigned-clock-rates = <0 0 722534400 22579200>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_novena>;
+	linux,keymap = <
+		MATRIX_KEY(1, 1, KEY_CONFIG)
+	>;
+	status = "okay";
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "jeida";
+		fsl,data-width = <24>;
+		fsl,panel = <&panel>;
+		status = "okay";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_novena>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&sata {
+	target-supply = <&reg_sata>;
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <8>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_novena>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_novena>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_novena>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_novena>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_swbst>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_novena>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_novena>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux_novena: audmuxgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight_novena: backlightgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3_novena: ecspi3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_enet_novena: enetgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b028
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b028
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b028
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b028
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b028
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			/* Ethernet reset */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b1
+		>;
+	};
+
+	pinctrl_fpga_gpio: fpgagpiogrp-novena {
+		fsl,pins = <
+			/* FPGA power */
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
+			/* Reset */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			/* FPGA GPIOs */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1
+		>;
+	};
+
+	pinctrl_fpga_eim: fpgaeimgrp-novena {
+		fsl,pins = <
+			/* FPGA power */
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
+			/* Reset */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			/* FPGA GPIOs */
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0f1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0f1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0f1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0f1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0f1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0f1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0f1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0f1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0f1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0f1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0f1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0f1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0f1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0f1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0f1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0f1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0f1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0f1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0f1
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0f1
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B		0xb0f1
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B		0xb0f1
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0f1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0f1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb0f1
+			MX6QDL_PAD_EIM_BCLK__EIM_BCLK		0xb0f1
+		>;
+	};
+
+	pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
+		fsl,pins = <
+			/* User button */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			/* PCIe Wakeup */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1f0e0
+			/* Lid switch */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_novena: hdmigrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c1_novena: i2c1grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_novena: i2c2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_novena: i2c3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_kpp_novena: kppgrp-novena {
+		fsl,pins = <
+			/* Front panel button */
+			MX6QDL_PAD_KEY_ROW1__KEY_ROW1		0x1b0b1
+			/* Fake column driver, not connected */
+			MX6QDL_PAD_KEY_COL1__KEY_COL1		0x1b0b1
+		>;
+	};
+
+	pinctrl_leds_novena: ledsgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21		0x1b0b1
+		>;
+	};
+
+	pinctrl_pcie_novena: pciegrp-novena {
+		fsl,pins = <
+			/* Reset */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1
+			/* Power On */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1
+			/* Wifi kill */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1
+		>;
+	};
+
+	pinctrl_sata_novena: satagrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b1
+		>;
+	};
+
+	pinctrl_senoko_novena: senokogrp-novena {
+		fsl,pins = <
+			/* Senoko IRQ line */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x13048
+			/* Senoko reset line */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1
+		>;
+	};
+
+	pinctrl_sound_novena: soundgrp-novena {
+		fsl,pins = <
+			/* Audio power regulator */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
+			/* Headphone plug */
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+		>;
+	};
+
+	pinctrl_stmpe_novena: stmpegrp-novena {
+		fsl,pins = <
+			/* Touchscreen interrupt */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2_novena: uart2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_novena: uart3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4_novena: uart4grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_novena: usbotggrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_novena: usdhc2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			/* Write protect */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
+			/* Card detect */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3_novena: usdhc3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-emmc.dts
new file mode 100644
index 0000000000000..322f071d972f6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-emmc.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC";
+	compatible = "phytec,imx6q-pbac06-emmc", "phytec,imx6q-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&m25p80 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
+
+&usdhc4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-nand.dts
new file mode 100644
index 0000000000000..3f13726c80586
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-nand.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
+	compatible = "phytec,imx6q-pbac06-nand", "phytec,imx6q-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&m25p80 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pbab01.dts
new file mode 100644
index 0000000000000..affe30b02d5af
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pbab01.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+/dts-v1/;
+#include "imx6q-phytec-pfla02.dtsi"
+#include "imx6qdl-phytec-pbab01.dtsi"
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board";
+	compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pfla02.dtsi
new file mode 100644
index 0000000000000..500944bd2a05c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pfla02.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-pfla02.dtsi"
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 Quad";
+	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pico-dwarf.dts
new file mode 100644
index 0000000000000..479a63ed42af0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pico-dwarf.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Dwarf baseboard";
+	compatible = "technexion,imx6q-pico-dwarf", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pico-hobbit.dts
new file mode 100644
index 0000000000000..b767131068f58
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pico-hobbit.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-hobbit.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Hobbit baseboard";
+	compatible = "technexion,imx6q-pico-hobbit", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-pico-nymph.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pico-nymph.dts
new file mode 100644
index 0000000000000..e8ad4c12b263c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pico-nymph.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Nymph baseboard";
+	compatible = "technexion,imx6q-pico-nymph", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pico-pi.dts
new file mode 100644
index 0000000000000..cc2394ddad6cc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pico-pi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and PI baseboard";
+	compatible = "technexion,imx6q-pico-pi", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6q-pinfunc.h
new file mode 100644
index 0000000000000..e40409d04b974
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pinfunc.h
@@ -0,0 +1,1044 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6Q_PINFUNC_H
+#define __DTS_IMX6Q_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x04c 0x360 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0             0x04c 0x360 0x834 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x04c 0x360 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x04c 0x360 0x7c8 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x04c 0x360 0x8f0 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x04c 0x360 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x050 0x364 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1             0x050 0x364 0x838 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x050 0x364 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x050 0x364 0x7b8 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x050 0x364 0x8f8 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x050 0x364 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x054 0x368 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO            0x054 0x368 0x82c 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x054 0x368 0x7b4 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x054 0x368 0x8fc 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x054 0x368 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x054 0x368 0x000 0x6 0x0
+#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x058 0x36c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x058 0x36c 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x058 0x36c 0x918 0x2 0x0
+#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x058 0x36c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x058 0x36c 0x000 0x7 0x0
+#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x05c 0x370 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x05c 0x370 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x05c 0x370 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x060 0x374 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x060 0x374 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x060 0x374 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x064 0x378 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x064 0x378 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x064 0x378 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x068 0x37c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x068 0x37c 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x068 0x37c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x06c 0x380 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x06c 0x380 0x858 0x1 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x06c 0x380 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x070 0x384 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x070 0x384 0x848 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x070 0x384 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x074 0x388 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x074 0x388 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x074 0x388 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x074 0x388 0x83c 0x7 0x0
+#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x078 0x38c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x078 0x38c 0x84c 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x078 0x38c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x07c 0x390 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x07c 0x390 0x850 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x07c 0x390 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x080 0x394 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x080 0x394 0x854 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x080 0x394 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x084 0x398 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x084 0x398 0x844 0x1 0x0
+#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x084 0x398 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x088 0x39c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x088 0x39c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x088 0x39c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x088 0x39c 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x088 0x39c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x088 0x39c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x088 0x39c 0x88c 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x08c 0x3a0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x08c 0x3a0 0x800 0x1 0x0
+#define MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19        0x08c 0x3a0 0x8d4 0x3 0x0
+#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x08c 0x3a0 0x890 0x4 0x0
+#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x08c 0x3a0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x08c 0x3a0 0x8a0 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x08c 0x3a0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x090 0x3a4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x090 0x3a4 0x7f4 0x1 0x0
+#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x090 0x3a4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18        0x090 0x3a4 0x8d0 0x3 0x0
+#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x090 0x3a4 0x894 0x4 0x0
+#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x090 0x3a4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x090 0x3a4 0x8a4 0x6 0x0
+#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x094 0x3a8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x094 0x3a8 0x7f8 0x1 0x0
+#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x094 0x3a8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D17__IPU2_CSI1_PIXCLK        0x094 0x3a8 0x8e0 0x3 0x0
+#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x094 0x3a8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x094 0x3a8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x094 0x3a8 0x8a8 0x6 0x0
+#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x098 0x3ac 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x098 0x3ac 0x7fc 0x1 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x098 0x3ac 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17        0x098 0x3ac 0x8cc 0x3 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x098 0x3ac 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x098 0x3ac 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x098 0x3ac 0x8ac 0x6 0x0
+#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x09c 0x3b0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x09c 0x3b0 0x804 0x1 0x0
+#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x09c 0x3b0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16        0x09c 0x3b0 0x8c8 0x3 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x09c 0x3b0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x09c 0x3b0 0x91c 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x09c 0x3b0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x09c 0x3b0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x0a0 0x3b4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x0a0 0x3b4 0x824 0x1 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x0a0 0x3b4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15        0x0a0 0x3b4 0x8c4 0x3 0x0
+#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x0a0 0x3b4 0x91c 0x4 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x0a0 0x3b4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x0a0 0x3b4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x0a0 0x3b4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x0a4 0x3b8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x0a4 0x3b8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x0a4 0x3b8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D21__IPU2_CSI1_DATA11        0x0a4 0x3b8 0x8b4 0x3 0x0
+#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x0a4 0x3b8 0x944 0x4 0x0
+#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x0a4 0x3b8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x0a4 0x3b8 0x898 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x0a4 0x3b8 0x914 0x7 0x0
+#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x0a8 0x3bc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x0a8 0x3bc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x0a8 0x3bc 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D22__IPU2_CSI1_DATA10        0x0a8 0x3bc 0x8b0 0x3 0x0
+#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x0a8 0x3bc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x0a8 0x3bc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x0a8 0x3bc 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x0ac 0x3c0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x0ac 0x3c0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x0ac 0x3c0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x0ac 0x3c0 0x92c 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x0ac 0x3c0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D23__IPU2_CSI1_DATA_EN       0x0ac 0x3c0 0x8d8 0x4 0x0
+#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x0ac 0x3c0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x0ac 0x3c0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x0ac 0x3c0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x0b0 0x3c4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x0b0 0x3c4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x0b0 0x3c4 0x92c 0x2 0x1
+#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x0b0 0x3c4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x0b0 0x3c4 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC         0x0b0 0x3c4 0x8dc 0x4 0x0
+#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x0b0 0x3c4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x0b0 0x3c4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x0b0 0x3c4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x0b4 0x3c8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x0b4 0x3c8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x0b4 0x3c8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x0b4 0x3c8 0x930 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x0b4 0x3c8 0x808 0x3 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x0b4 0x3c8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x0b4 0x3c8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x0b4 0x3c8 0x7d8 0x6 0x0
+#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x0b4 0x3c8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x0b8 0x3cc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x0b8 0x3cc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x0b8 0x3cc 0x930 0x2 0x1
+#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x0b8 0x3cc 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x0b8 0x3cc 0x80c 0x3 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x0b8 0x3cc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x0b8 0x3cc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x0b8 0x3cc 0x7d4 0x6 0x0
+#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x0b8 0x3cc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x0bc 0x3d0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x0bc 0x3d0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x0bc 0x3d0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14        0x0bc 0x3d0 0x8c0 0x3 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x0bc 0x3d0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x0bc 0x3d0 0x928 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x0bc 0x3d0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x0bc 0x3d0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x0bc 0x3d0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x0c0 0x3d4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x0c0 0x3d4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x0c0 0x3d4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13        0x0c0 0x3d4 0x8bc 0x3 0x0
+#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x0c0 0x3d4 0x928 0x4 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x0c0 0x3d4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x0c0 0x3d4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x0c0 0x3d4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x0c0 0x3d4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x0c4 0x3d8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x0c4 0x3d8 0x89c 0x1 0x0
+#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x0c4 0x3d8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D28__IPU2_CSI1_DATA12        0x0c4 0x3d8 0x8b8 0x3 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x0c4 0x3d8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x0c4 0x3d8 0x924 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x0c4 0x3d8 0x924 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x0c4 0x3d8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x0c4 0x3d8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x0c4 0x3d8 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x0c4 0x3d8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x0c8 0x3dc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x0c8 0x3dc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x0c8 0x3dc 0x824 0x2 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x0c8 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x0c8 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x0c8 0x3dc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC         0x0c8 0x3dc 0x8e4 0x6 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x0c8 0x3dc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x0cc 0x3e0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x0cc 0x3e0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x0cc 0x3e0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x0cc 0x3e0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x0cc 0x3e0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x0cc 0x3e0 0x92c 0x4 0x2
+#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x0cc 0x3e0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x0cc 0x3e0 0x948 0x6 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x0d0 0x3e4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x0d0 0x3e4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x0d0 0x3e4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x0d0 0x3e4 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x0d0 0x3e4 0x92c 0x4 0x3
+#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x0d0 0x3e4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x0d0 0x3e4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x0d0 0x3e4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x0d4 0x3e8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x0d4 0x3e8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A24__IPU2_CSI1_DATA19        0x0d4 0x3e8 0x8d4 0x2 0x1
+#define MX6QDL_PAD_EIM_A24__IPU2_SISG2              0x0d4 0x3e8 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x0d4 0x3e8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x0d4 0x3e8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x0d4 0x3e8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x0d8 0x3ec 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x0d8 0x3ec 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A23__IPU2_CSI1_DATA18        0x0d8 0x3ec 0x8d0 0x2 0x1
+#define MX6QDL_PAD_EIM_A23__IPU2_SISG3              0x0d8 0x3ec 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x0d8 0x3ec 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x0d8 0x3ec 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x0d8 0x3ec 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x0dc 0x3f0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x0dc 0x3f0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A22__IPU2_CSI1_DATA17        0x0dc 0x3f0 0x8cc 0x2 0x1
+#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x0dc 0x3f0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x0dc 0x3f0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x0e0 0x3f4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x0e0 0x3f4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A21__IPU2_CSI1_DATA16        0x0e0 0x3f4 0x8c8 0x2 0x1
+#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x0e0 0x3f4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x0e0 0x3f4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x0e4 0x3f8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x0e4 0x3f8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A20__IPU2_CSI1_DATA15        0x0e4 0x3f8 0x8c4 0x2 0x1
+#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x0e4 0x3f8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x0e4 0x3f8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x0e8 0x3fc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x0e8 0x3fc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A19__IPU2_CSI1_DATA14        0x0e8 0x3fc 0x8c0 0x2 0x1
+#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x0e8 0x3fc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x0e8 0x3fc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x0ec 0x400 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x0ec 0x400 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A18__IPU2_CSI1_DATA13        0x0ec 0x400 0x8bc 0x2 0x1
+#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x0ec 0x400 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x0ec 0x400 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x0f0 0x404 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x0f0 0x404 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12        0x0f0 0x404 0x8b8 0x2 0x1
+#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x0f0 0x404 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x0f0 0x404 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x0f4 0x408 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x0f4 0x408 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK        0x0f4 0x408 0x8e0 0x2 0x1
+#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x0f4 0x408 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x0f4 0x408 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x0f8 0x40c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x0f8 0x40c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x0f8 0x40c 0x810 0x2 0x0
+#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x0f8 0x40c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x0fc 0x410 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x0fc 0x410 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x0fc 0x410 0x818 0x2 0x0
+#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x0fc 0x410 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x100 0x414 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x100 0x414 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x100 0x414 0x814 0x2 0x0
+#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x100 0x414 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x104 0x418 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x104 0x418 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x104 0x418 0x81c 0x2 0x0
+#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x104 0x418 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x104 0x418 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x108 0x41c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x108 0x41c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x108 0x41c 0x820 0x2 0x0
+#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x108 0x41c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x108 0x41c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x10c 0x420 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x10c 0x420 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU2_CSI1_DATA11        0x10c 0x420 0x8b4 0x2 0x1
+#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x10c 0x420 0x7f0 0x4 0x0
+#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x10c 0x420 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x10c 0x420 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x110 0x424 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x110 0x424 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU2_CSI1_DATA10        0x110 0x424 0x8b0 0x2 0x1
+#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x110 0x424 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x110 0x424 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x114 0x428 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x114 0x428 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU2_CSI1_DATA09        0x114 0x428 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x114 0x428 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x114 0x428 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x118 0x42c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x118 0x42c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU2_CSI1_DATA08        0x118 0x42c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x118 0x42c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x118 0x42c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x11c 0x430 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x11c 0x430 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU2_CSI1_DATA07        0x11c 0x430 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x11c 0x430 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x11c 0x430 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x120 0x434 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x120 0x434 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU2_CSI1_DATA06        0x120 0x434 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x120 0x434 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x120 0x434 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x124 0x438 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x124 0x438 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU2_CSI1_DATA05        0x124 0x438 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x124 0x438 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x124 0x438 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x128 0x43c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x128 0x43c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU2_CSI1_DATA04        0x128 0x43c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x128 0x43c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x128 0x43c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x12c 0x440 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x12c 0x440 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU2_CSI1_DATA03        0x12c 0x440 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x12c 0x440 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x12c 0x440 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x130 0x444 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x130 0x444 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU2_CSI1_DATA02        0x130 0x444 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x130 0x444 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x130 0x444 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x134 0x448 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x134 0x448 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU2_CSI1_DATA01        0x134 0x448 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x134 0x448 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x134 0x448 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x138 0x44c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x138 0x44c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU2_CSI1_DATA00        0x138 0x44c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x138 0x44c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x138 0x44c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x13c 0x450 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x13c 0x450 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU2_CSI1_DATA_EN      0x13c 0x450 0x8d8 0x2 0x1
+#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x13c 0x450 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x13c 0x450 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x140 0x454 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x140 0x454 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU2_CSI1_HSYNC        0x140 0x454 0x8dc 0x2 0x1
+#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x140 0x454 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x140 0x454 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x144 0x458 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x144 0x458 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU2_CSI1_VSYNC        0x144 0x458 0x8e4 0x2 0x1
+#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x144 0x458 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x144 0x458 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x148 0x45c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x148 0x45c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x148 0x45c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x148 0x45c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x14c 0x460 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x14c 0x460 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x14c 0x460 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x14c 0x460 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x150 0x464 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x150 0x464 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x150 0x464 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x150 0x464 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x150 0x464 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x154 0x468 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x154 0x468 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x154 0x468 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x154 0x468 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x158 0x46c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x158 0x46c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x158 0x46c 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x15c 0x470 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK  0x15c 0x470 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x15c 0x470 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x160 0x474 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15        0x160 0x474 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x160 0x474 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x160 0x474 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x164 0x478 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02         0x164 0x478 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x164 0x478 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x164 0x478 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x168 0x47c 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03         0x168 0x47c 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x168 0x47c 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x168 0x47c 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x16c 0x480 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04         0x16c 0x480 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x16c 0x480 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x16c 0x480 0x94c 0x3 0x0
+#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x16c 0x480 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x170 0x484 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00    0x170 0x484 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x170 0x484 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x170 0x484 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x174 0x488 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01    0x174 0x488 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x174 0x488 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x174 0x488 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x178 0x48c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02    0x178 0x48c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x178 0x48c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x178 0x48c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x17c 0x490 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03    0x17c 0x490 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x17c 0x490 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x17c 0x490 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x180 0x494 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04    0x180 0x494 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x180 0x494 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x180 0x494 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x184 0x498 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05    0x184 0x498 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x184 0x498 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x184 0x498 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x184 0x498 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x188 0x49c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06    0x188 0x49c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x188 0x49c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x188 0x49c 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x188 0x49c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x18c 0x4a0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07    0x18c 0x4a0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x18c 0x4a0 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x18c 0x4a0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x190 0x4a4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08    0x190 0x4a4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x190 0x4a4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x190 0x4a4 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x190 0x4a4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x194 0x4a8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09    0x194 0x4a8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x194 0x4a8 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x194 0x4a8 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x194 0x4a8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x198 0x4ac 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10   0x198 0x4ac 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x198 0x4ac 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x19c 0x4b0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11   0x19c 0x4b0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x19c 0x4b0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x1a0 0x4b4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12   0x1a0 0x4b4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x1a0 0x4b4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x1a4 0x4b8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13   0x1a4 0x4b8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x1a4 0x4b8 0x7d8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x1a4 0x4b8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x1a8 0x4bc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14   0x1a8 0x4bc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x1a8 0x4bc 0x7d4 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x1a8 0x4bc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x1ac 0x4c0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15   0x1ac 0x4c0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x1ac 0x4c0 0x804 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x1ac 0x4c0 0x820 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x1ac 0x4c0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x1b0 0x4c4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16   0x1b0 0x4c4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x1b0 0x4c4 0x818 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x1b0 0x4c4 0x7dc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x1b0 0x4c4 0x90c 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x1b0 0x4c4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x1b4 0x4c8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17   0x1b4 0x4c8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x1b4 0x4c8 0x814 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x1b4 0x4c8 0x7d0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x1b4 0x4c8 0x910 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x1b4 0x4c8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x1b8 0x4cc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18   0x1b8 0x4cc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x1b8 0x4cc 0x81c 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x1b8 0x4cc 0x7e0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x1b8 0x4cc 0x7c0 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x1b8 0x4cc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x1b8 0x4cc 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x1bc 0x4d0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19   0x1bc 0x4d0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x1bc 0x4d0 0x810 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x1bc 0x4d0 0x7cc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x1bc 0x4d0 0x7bc 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x1bc 0x4d0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x1bc 0x4d0 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x1c0 0x4d4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20   0x1c0 0x4d4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x1c0 0x4d4 0x7f4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x1c0 0x4d4 0x7c4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x1c0 0x4d4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x1c4 0x4d8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21   0x1c4 0x4d8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x1c4 0x4d8 0x7fc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x1c4 0x4d8 0x7b8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x1c4 0x4d8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x1c8 0x4dc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22   0x1c8 0x4dc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x1c8 0x4dc 0x7f8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x1c8 0x4dc 0x7c8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x1c8 0x4dc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x1cc 0x4e0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23   0x1cc 0x4e0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x1cc 0x4e0 0x800 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x1cc 0x4e0 0x7b4 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x1cc 0x4e0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1d0 0x4e4 0x840 0x1 0x0
+#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1d0 0x4e4 0x86c 0x2 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1d0 0x4e4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1d0 0x4e4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1d0 0x4e4 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1d4 0x4e8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1d4 0x4e8 0x85c 0x2 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1d4 0x4e8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1d4 0x4e8 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x004 0x0 0xff0d0100
+#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1d8 0x4ec 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1d8 0x4ec 0x864 0x2 0x0
+#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1d8 0x4ec 0x914 0x3 0x1
+#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1d8 0x4ec 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1dc 0x4f0 0x858 0x1 0x1
+#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1dc 0x4f0 0x870 0x2 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1dc 0x4f0 0x918 0x3 0x1
+#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1dc 0x4f0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1e0 0x4f4 0x908 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1e0 0x4f4 0x84c 0x1 0x1
+#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1e0 0x4f4 0x860 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1e0 0x4f4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1e0 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT        0x1e4 0x4f8 0x000 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1e4 0x4f8 0x848 0x1 0x1
+#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1e4 0x4f8 0x868 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1e4 0x4f8 0x000 0x3 0x0
+#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1e4 0x4f8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x1e8 0x4fc 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x1e8 0x4fc 0x880 0x2 0x0
+#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x1e8 0x4fc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x1ec 0x500 0x900 0x0 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x1ec 0x500 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x1ec 0x500 0x87c 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x1ec 0x500 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x1ec 0x500 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x1f0 0x504 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x1f0 0x504 0x884 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x1f0 0x504 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1f4 0x508 0x904 0x0 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1f4 0x508 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1f4 0x508 0x888 0x2 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1f4 0x508 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1f4 0x508 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x1f8 0x5c8 0x7f4 0x0 0x2
+#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x1f8 0x5c8 0x854 0x1 0x1
+#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x1f8 0x5c8 0x7dc 0x2 0x1
+#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x1f8 0x5c8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x1f8 0x5c8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x1f8 0x5c8 0x938 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x1f8 0x5c8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x1f8 0x5c8 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x1fc 0x5cc 0x7fc 0x0 0x2
+#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x1fc 0x5cc 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x1fc 0x5cc 0x7d0 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x1fc 0x5cc 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x1fc 0x5cc 0x938 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x1fc 0x5cc 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x1fc 0x5cc 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x1fc 0x5cc 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x200 0x5d0 0x7f8 0x0 0x2
+#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x200 0x5d0 0x840 0x1 0x1
+#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x200 0x5d0 0x7e0 0x2 0x1
+#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x200 0x5d0 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x200 0x5d0 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x200 0x5d0 0x940 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x200 0x5d0 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x200 0x5d0 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x204 0x5d4 0x800 0x0 0x2
+#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x204 0x5d4 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x204 0x5d4 0x7cc 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x204 0x5d4 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x204 0x5d4 0x940 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x204 0x5d4 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x204 0x5d4 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x204 0x5d4 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x208 0x5d8 0x804 0x0 0x2
+#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x208 0x5d8 0x850 0x1 0x1
+#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x208 0x5d8 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x208 0x5d8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x208 0x5d8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x208 0x5d8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x208 0x5d8 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x20c 0x5dc 0x808 0x0 0x1
+#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x20c 0x5dc 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x20c 0x5dc 0x7e4 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x20c 0x5dc 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x20c 0x5dc 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x20c 0x5dc 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x20c 0x5dc 0x88c 0x6 0x1
+#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x210 0x5e0 0x80c 0x0 0x1
+#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x210 0x5e0 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x210 0x5e0 0x890 0x2 0x1
+#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x210 0x5e0 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x210 0x5e0 0x8a0 0x4 0x1
+#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x210 0x5e0 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x210 0x5e0 0x914 0x6 0x2
+#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x214 0x5e4 0x7b0 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x214 0x5e4 0x894 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x214 0x5e4 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x214 0x5e4 0x8a4 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x214 0x5e4 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x214 0x5e4 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x218 0x5e8 0x000 0x0 0x0
+#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x218 0x5e8 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x218 0x5e8 0x944 0x2 0x1
+#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x218 0x5e8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x218 0x5e8 0x93c 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x218 0x5e8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x218 0x5e8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x21c 0x5ec 0x7e8 0x0 0x0
+#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x21c 0x5ec 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x21c 0x5ec 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x21c 0x5ec 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x21c 0x5ec 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x21c 0x5ec 0x93c 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x21c 0x5ec 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x220 0x5f0 0x000 0x0 0x0
+#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x220 0x5f0 0x8e8 0x2 0x0
+#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x220 0x5f0 0x7b0 0x3 0x1
+#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x220 0x5f0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x220 0x5f0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x220 0x5f0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x220 0x5f0 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x224 0x5f4 0x86c 0x0 0x1
+#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x224 0x5f4 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x224 0x5f4 0x8f4 0x2 0x0
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x004 0x3 0xff0d0101
+#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x224 0x5f4 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x224 0x5f4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x224 0x5f4 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x228 0x5f8 0x85c 0x0 0x1
+#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x228 0x5f8 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x228 0x5f8 0x8ec 0x2 0x0
+#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x228 0x5f8 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x228 0x5f8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x228 0x5f8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x228 0x5f8 0x94c 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x22c 0x5fc 0x864 0x0 0x1
+#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x22c 0x5fc 0x8a8 0x2 0x1
+#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x22c 0x5fc 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x22c 0x5fc 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x22c 0x5fc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x22c 0x5fc 0x948 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x22c 0x5fc 0x900 0x7 0x1
+#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x230 0x600 0x870 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x230 0x600 0x03c 0x11 0xff000609
+#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x230 0x600 0x8ac 0x2 0x1
+#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x230 0x600 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x230 0x600 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x230 0x600 0x908 0x7 0x1
+#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x234 0x604 0x860 0x0 0x1
+#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x234 0x604 0x8f8 0x2 0x1
+#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x234 0x604 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x234 0x604 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x234 0x604 0x904 0x7 0x1
+#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x238 0x608 0x868 0x0 0x1
+#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x238 0x608 0x8f0 0x2 0x1
+#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x238 0x608 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x238 0x608 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x23c 0x60c 0x87c 0x0 0x1
+#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x23c 0x60c 0x8fc 0x2 0x1
+#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x23c 0x60c 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x23c 0x60c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x23c 0x60c 0x8a8 0x6 0x2
+#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x23c 0x60c 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x240 0x610 0x884 0x0 0x1
+#define MX6QDL_PAD_GPIO_7__ECSPI5_RDY               0x240 0x610 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x240 0x610 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x240 0x610 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x240 0x610 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x240 0x610 0x928 0x4 0x2
+#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x240 0x610 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x240 0x610 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x240 0x610 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x244 0x614 0x888 0x0 0x1
+#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x244 0x614 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x244 0x614 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x244 0x614 0x7e4 0x3 0x1
+#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x244 0x614 0x928 0x4 0x3
+#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x244 0x614 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x244 0x614 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x244 0x614 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x244 0x614 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x248 0x618 0x880 0x0 0x1
+#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x248 0x618 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x248 0x618 0x83c 0x2 0x1
+#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x248 0x618 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x248 0x618 0x914 0x4 0x3
+#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x248 0x618 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x248 0x618 0x8ac 0x6 0x2
+#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x248 0x618 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x24c 0x61c 0x874 0x0 0x0
+#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x24c 0x61c 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x24c 0x61c 0x7f0 0x2 0x1
+#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x24c 0x61c 0x90c 0x3 0x1
+#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x24c 0x61c 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x24c 0x61c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x250 0x620 0x878 0x0 0x0
+#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x250 0x620 0x844 0x1 0x1
+#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x250 0x620 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x250 0x620 0x910 0x3 0x1
+#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x250 0x620 0x7b0 0x4 0x2
+#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x250 0x620 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x250 0x620 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x254 0x624 0x8e8 0x0 0x1
+#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x254 0x624 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x254 0x624 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x254 0x624 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x254 0x624 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x254 0x624 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x254 0x624 0x000 0x6 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x258 0x628 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x258 0x628 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x258 0x628 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x25c 0x62c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x25c 0x62c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x25c 0x62c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x25c 0x62c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x260 0x630 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x260 0x630 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x260 0x630 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x260 0x630 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x264 0x634 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x264 0x634 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x264 0x634 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x264 0x634 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x268 0x638 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x268 0x638 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x268 0x638 0x7f4 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x268 0x638 0x8e8 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x268 0x638 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x268 0x638 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x268 0x638 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x26c 0x63c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x26c 0x63c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x26c 0x63c 0x7fc 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x26c 0x63c 0x8f4 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x26c 0x63c 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x26c 0x63c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x26c 0x63c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x270 0x640 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x270 0x640 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x270 0x640 0x7f8 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x270 0x640 0x8ec 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x270 0x640 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x270 0x640 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x270 0x640 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x274 0x644 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x274 0x644 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x274 0x644 0x800 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x274 0x644 0x8f8 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x274 0x644 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x274 0x644 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x274 0x644 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x278 0x648 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x278 0x648 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x278 0x648 0x810 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x278 0x648 0x8f0 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x278 0x648 0x89c 0x4 0x1
+#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x278 0x648 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x278 0x648 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x27c 0x64c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x27c 0x64c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x27c 0x64c 0x818 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x27c 0x64c 0x8fc 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x27c 0x64c 0x898 0x4 0x1
+#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x27c 0x64c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x27c 0x64c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x280 0x650 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x280 0x650 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x280 0x650 0x814 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x280 0x650 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x280 0x650 0x920 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x280 0x650 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x280 0x650 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x284 0x654 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x284 0x654 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x284 0x654 0x81c 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x284 0x654 0x920 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x284 0x654 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x284 0x654 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x284 0x654 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x288 0x658 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x288 0x658 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x288 0x658 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x288 0x658 0x938 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x288 0x658 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x288 0x658 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x28c 0x65c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x28c 0x65c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x28c 0x65c 0x938 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x28c 0x65c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x28c 0x65c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x28c 0x65c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x290 0x660 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x290 0x660 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x290 0x660 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x290 0x660 0x940 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x290 0x660 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x290 0x660 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x294 0x664 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x294 0x664 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x294 0x664 0x940 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x294 0x664 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x294 0x664 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x294 0x664 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x298 0x668 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x298 0x668 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x298 0x668 0x934 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x298 0x668 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x298 0x668 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x298 0x668 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x29c 0x66c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x29c 0x66c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x29c 0x66c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x29c 0x66c 0x934 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x29c 0x66c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x29c 0x66c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x2a0 0x670 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x2a0 0x670 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x2a0 0x670 0x93c 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x2a0 0x670 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x2a0 0x670 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x2a0 0x670 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x2a4 0x674 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x2a4 0x674 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x2a4 0x674 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x2a4 0x674 0x93c 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x2a4 0x674 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x2a8 0x690 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x2a8 0x690 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x2a8 0x690 0x920 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x2a8 0x690 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x2ac 0x694 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x2ac 0x694 0x920 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x2ac 0x694 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x2ac 0x694 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x2b0 0x698 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x2b0 0x698 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x2b0 0x698 0x928 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x2b0 0x698 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x2b4 0x69c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x2b4 0x69c 0x928 0x1 0x5
+#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x2b4 0x69c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x2b4 0x69c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x2b8 0x6a0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x2b8 0x6a0 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x2b8 0x6a0 0x924 0x1 0x2
+#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x2b8 0x6a0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x2b8 0x6a0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x2bc 0x6a4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x2bc 0x6a4 0x924 0x1 0x3
+#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x2bc 0x6a4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x2bc 0x6a4 0x7e4 0x2 0x2
+#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x2bc 0x6a4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x2c0 0x6a8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x2c0 0x6a8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x2c0 0x6a8 0x91c 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x2c0 0x6a8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x2c0 0x6a8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x2c4 0x6ac 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x2c4 0x6ac 0x91c 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x2c4 0x6ac 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x2c4 0x6ac 0x7e8 0x2 0x1
+#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x2c4 0x6ac 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x2c8 0x6b0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x2c8 0x6b0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x2cc 0x6b4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x2cc 0x6b4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x2cc 0x6b4 0x92c 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x2cc 0x6b4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x2d0 0x6b8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x2d0 0x6b8 0x92c 0x1 0x5
+#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x2d0 0x6b8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x2d0 0x6b8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x2d4 0x6bc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CLE__IPU2_SISG4            0x2d4 0x6bc 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x2d4 0x6bc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x2d8 0x6c0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x2d8 0x6c0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x2d8 0x6c0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2dc 0x6c4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_WP_B__IPU2_SISG5           0x2dc 0x6c4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2dc 0x6c4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2e0 0x6c8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_RB0__IPU2_DI0_PIN01        0x2e0 0x6c8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2e0 0x6c8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x2e4 0x6cc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x2e4 0x6cc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x2e8 0x6d0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x2e8 0x6d0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x2e8 0x6d0 0x000 0x2 0x0
+#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x2e8 0x6d0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x2ec 0x6d4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x2ec 0x6d4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x2ec 0x6d4 0x874 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x2ec 0x6d4 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x2ec 0x6d4 0x000 0x4 0x0
+#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x2ec 0x6d4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU2_SISG0            0x2ec 0x6d4 0x000 0x6 0x0
+#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x2f0 0x6d8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x2f0 0x6d8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x2f0 0x6d8 0x878 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x2f0 0x6d8 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x2f0 0x6d8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU2_SISG1            0x2f0 0x6d8 0x000 0x6 0x0
+#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x2f4 0x6dc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x2f4 0x6dc 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x2f4 0x6dc 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x2f4 0x6dc 0x930 0x2 0x2
+#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x2f4 0x6dc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x2f8 0x6e0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x2f8 0x6e0 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x2f8 0x6e0 0x930 0x2 0x3
+#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x2f8 0x6e0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x2f8 0x6e0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x2fc 0x6e4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x2fc 0x6e4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x2fc 0x6e4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x300 0x6e8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x300 0x6e8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x300 0x6e8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x304 0x6ec 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x304 0x6ec 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x304 0x6ec 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x308 0x6f0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x308 0x6f0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x308 0x6f0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x30c 0x6f4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x30c 0x6f4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x30c 0x6f4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x310 0x6f8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x310 0x6f8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x310 0x6f8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x314 0x6fc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x314 0x6fc 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x314 0x6fc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x318 0x700 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x318 0x700 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x318 0x700 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x31c 0x704 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x31c 0x704 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x31c 0x704 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x320 0x708 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x320 0x708 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x320 0x708 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x324 0x70c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x324 0x70c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x324 0x70c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x328 0x710 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x328 0x710 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x32c 0x714 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x32c 0x714 0x928 0x2 0x6
+#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x32c 0x714 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x32c 0x714 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x330 0x718 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x330 0x718 0x924 0x2 0x4
+#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x330 0x718 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x330 0x718 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x334 0x71c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x334 0x71c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x334 0x71c 0x924 0x2 0x5
+#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x334 0x71c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x338 0x720 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x338 0x720 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x338 0x720 0x928 0x2 0x7
+#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x338 0x720 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x33c 0x724 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT1__ECSPI5_SS0             0x33c 0x724 0x834 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x33c 0x724 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x33c 0x724 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x33c 0x724 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x340 0x728 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO            0x340 0x728 0x82c 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x340 0x728 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x340 0x728 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x344 0x72c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT3__ECSPI5_SS2             0x344 0x72c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x344 0x72c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x344 0x72c 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x344 0x72c 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x344 0x72c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x344 0x72c 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x348 0x730 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI             0x348 0x730 0x830 0x1 0x0
+#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x348 0x730 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x348 0x730 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x348 0x730 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x34c 0x734 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT2__ECSPI5_SS1             0x34c 0x734 0x838 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x34c 0x734 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x34c 0x734 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x34c 0x734 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x34c 0x734 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x34c 0x734 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x350 0x738 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK             0x350 0x738 0x828 0x1 0x0
+#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x350 0x738 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x350 0x738 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x350 0x738 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x354 0x73c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK             0x354 0x73c 0x828 0x1 0x1
+#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x354 0x73c 0x8e8 0x2 0x3
+#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x354 0x73c 0x7c0 0x3 0x1
+#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x354 0x73c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x358 0x740 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI             0x358 0x740 0x830 0x1 0x1
+#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x358 0x740 0x8f4 0x2 0x2
+#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x358 0x740 0x7bc 0x3 0x1
+#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x358 0x740 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x35c 0x744 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT3__ECSPI5_SS3             0x35c 0x744 0x000 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x35c 0x744 0x8ec 0x2 0x2
+#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x35c 0x744 0x7c4 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x35c 0x744 0x000 0x5 0x0
+
+#endif /* __DTS_IMX6Q_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts
new file mode 100644
index 0000000000000..109b46a22b5e8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts
@@ -0,0 +1,695 @@
+/*
+ * Copyright (C) 2017 NutsBoard.Org
+ *
+ * Author: Wig Cheng <onlywig@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "NutsBoard i.MX6 Quad Pistachio board";
+	compatible = "nutsboard,imx6q-pistachio", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-sgtl5000",
+			   "fsl,imx-audio-sgtl5000";
+		model = "audio-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000>;
+		brightness-levels = <
+			0  /*1  2  3  4  5  6*/  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <94>;
+		status = "okay";
+	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_1p8v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	ar1021@4d {
+		compatible = "microchip,ar1021-i2c";
+		reg = <0x4d>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0  /*pcie power*/
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x1b0b0   /*LCD power*/
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16	0x1b0b0   /*backlight power*/
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1 /*SD3 CD pin*/
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0 /*codec power*/
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22	0x1b0b0 /*touch reset*/
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b01 /*touch irq*/
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07	 0x1b0b0/*backlight pwr*/
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11	0x1b0b0 /*gpio 5V_1*/
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19	0x1b0b0 /*gpio 5V_2*/
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04	0x1b0b0 /*gpio 5V_3*/
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0 /*gpio 5V_4*/
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0 /*AUX_5V_EN*/
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0 /*AUX_5VB_EN*/
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0 /*AUX_3V3_EN*/
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21	0x1b0b0 /*I2C expander pwr*/
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			/* AR8035 reset */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x130b0
+			/* AR8035 interrupt */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+			/* AR8035 pin strapping: IO voltage: pull up */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			/* AR8035 pin strapping: PHYADDR#0: pull down */
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+			/* AR8035 pin strapping: PHYADDR#1: pull down */
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			/* AR8035 pin strapping: MODE#1: pull up */
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			/* AR8035 pin strapping: MODE#3: pull up */
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			/* AR8035 pin strapping: MODE#0: pull down */
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_sgtl5000: i2c1-sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1			0x000b0 /* sys_mclk */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x130b0 /*headphone det*/
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x130b0 /*microphone det*/
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	    0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B	0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B	0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		 0x15059 /*BT_EN*/
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D0__SD1_DATA4		0x17059
+			MX6QDL_PAD_NANDF_D1__SD1_DATA5		0x17059
+			MX6QDL_PAD_NANDF_D2__SD1_DATA6		0x17059
+			MX6QDL_PAD_NANDF_D3__SD1_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x15059 /*WL_EN_LDO*/
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x15059 /*WL_EN*/
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x15059 /*WL_IRQ*/
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17071
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17071
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17071
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17071
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17071
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b00
+		>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <0x5>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <0x5>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	vmmc-supply = <&wlan_en_reg>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	non-removable;
+	cap-power-off-card;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts
new file mode 100644
index 0000000000000..d8fa83effd638
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Protonic PRTI6Q board";
+	compatible = "prt,prti6q", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <1>;
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	can_osc: can-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-debug1 {
+			function = LED_FUNCTION_SD;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	panel {
+		compatible = "kyo,tcg121xglp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		enable-active-high;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "regulator-WL12xx";
+		startup-delay-us = <70000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can3>;
+		clocks = <&can_osc>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <5000000>;
+	};
+
+	adc@1 {
+		compatible = "ti,adc128s052";
+		reg = <1>;
+		spi-max-frequency = <2000000>;
+		vref-supply = <&reg_3v3>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ9031RNX PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+/* DDC */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* can2_l */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can2_h */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_l */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_h */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "ac97-slave";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	wifi {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <19200000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b008
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b008
+		>;
+	};
+
+	pinctrl_can3: can3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2csgrp {
+		fsl,pins = <
+			/* ADC128S022 CS */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x10030
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
+
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			/* NOTE: DDC is done via I2C2, so DON'T
+			 * configure DDC pins for HDMI!
+			 */
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	/* DDC */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN		0x1b0b0
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_id: usbotgidgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1f058
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			/* WL12xx IRQ */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x10880
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b8b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts
new file mode 100644
index 0000000000000..792b8903d3451
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2018 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic WD2 board";
+	compatible = "prt,prtwd2", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+	};
+
+	/* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
+	i2c {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4>;
+		sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <20>;	/* ~10 kHz */
+		i2c-gpio,scl-output-only;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		pause;
+		full-duplex;
+	};
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* V in */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* I charge */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* V bus  */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* nc */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_eth_chg>;
+
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x130b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__GPIO1_IO22	0x1f8b0
+			MX6QDL_PAD_ENET_MDC__GPIO1_IO31		0x1f8b0
+		>;
+	};
+
+	pinctrl_usb_eth_chg: usbethchggrp {
+		fsl,pins = <
+			/* USB charging control */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x130b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x130b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x130b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x130b0
+			>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x13069
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-rex-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-rex-pro.dts
new file mode 100644
index 0000000000000..271f4b2d9b9f0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-rex-pro.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-rex.dtsi"
+
+/ {
+	model = "Rex Pro i.MX6 Quad Board";
+	compatible = "rex,imx6q-rex-pro", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&ecspi3 {
+	flash: flash@0 {
+		compatible = "sst,sst25vf032b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dts
new file mode 100644
index 0000000000000..6e981a3e0a839
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dts b/arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dts
new file mode 100644
index 0000000000000..7c6a2f234ccbd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Lite Board";
+	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-sabresd.dts b/arch/arm/boot/dts/nxp/imx/imx6q-sabresd.dts
new file mode 100644
index 0000000000000..eec944673c0bf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-sabresd.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Smart Device Board";
+	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-savageboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-savageboard.dts
new file mode 100644
index 0000000000000..717ac62fc2cf6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-savageboard.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-savageboard.dtsi"
+
+/ {
+	model = "Poslab SavageBoard Quad";
+	compatible = "poslab,imx6q-savageboard", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-sbc6x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-sbc6x.dts
new file mode 100644
index 0000000000000..9054c1d58b9d1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-sbc6x.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Pavel Machek <pavel@denx.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "MicroSys sbc6x board";
+	compatible = "microsys,sbc6x", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&iomuxc {
+	imx6q-sbc6x {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt2.dts
new file mode 100644
index 0000000000000..ff97d22eb09f5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt2.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+#include "imx6qdl-skov-revc-lt2.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU QuadCore";
+	compatible = "skov,imx6q-skov-revc-lt2", "fsl,imx6q";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001f878
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001f878
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt6.dts
new file mode 100644
index 0000000000000..3e3b36ad362a6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt6.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU QuadCore";
+	compatible = "skov,imx6q-skov-revc-lt6", "fsl,imx6q";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	display {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l6wh-rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001F878
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001F878
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts
new file mode 100644
index 0000000000000..a3f247c722b43
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU QuadCore";
+	compatible = "skov,imx6q-skov-reve-mi1010ait-1cp1", "fsl,imx6q";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	panel {
+		compatible = "multi-inno,mi1010ait-1cp";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+		wakeup-source;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			/* external 1 k pull up */
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x40010878
+			/* external 1 k pull up */
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x40010878
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001F878
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001F878
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			/* CTP_INT */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+			/* CTP_RST */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
+		>;
+	};
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-solidsense.dts b/arch/arm/boot/dts/nxp/imx/imx6q-solidsense.dts
new file mode 100644
index 0000000000000..0e6a325df3632
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-solidsense.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-solidsense.dtsi"
+
+/ {
+	model = "SolidRun SolidSense Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,solidsense/q", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
new file mode 100644
index 0000000000000..2f576e2ce73f2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2014 Soeren Moch <smoch@web.de>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TBS2910 Matrix ARM mini PC";
+	compatible = "tbs,imx6q-tbs2910", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc4;
+		/delete-property/ mmc3;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	fan {
+		compatible = "gpio-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_fan>;
+		gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0    0
+				      3000 1>;
+	};
+
+	ir_recv {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-blue {
+			label = "blue_status_led";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound-sgtl5000 {
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "On-board Codec";
+		mux-ext-port = <3>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "On-board SPDIF";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <16>;
+	fsl,receive-eq-mdB = <3000>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_5p0v>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
+		>;
+	};
+
+	pinctrl_gpio_fan: gpiofangrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1
+		>;
+	};
+
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-tqma6a.dtsi
new file mode 100644
index 0000000000000..ab4c07c13a133
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tqma6a.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-tqma6a.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-tqma6b.dtsi
new file mode 100644
index 0000000000000..7224c376c3183
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tqma6b.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-tqma6b.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-ts4900.dts b/arch/arm/boot/dts/nxp/imx/imx6q-ts4900.dts
new file mode 100644
index 0000000000000..dce1e8671ebea
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ts4900.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-ts4900.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Quad TS-4900 (Default Device Tree)";
+	compatible = "technologic,imx6q-ts4900", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-ts7970.dts b/arch/arm/boot/dts/nxp/imx/imx6q-ts7970.dts
new file mode 100644
index 0000000000000..570bd3c309a6e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ts7970.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2015 Technologic Systems
+ * Copyright 2017 Savoir-faire Linux
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-ts7970.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Quad TS-7970 (Default Device Tree)";
+	compatible = "technologic,imx6q-ts7970", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts
new file mode 100644
index 0000000000000..ac3050a835e55
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+	/delete-property/ turn-on-delay-ms;
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts
new file mode 100644
index 0000000000000..4ee860b626ff6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ipu2 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts
new file mode 100644
index 0000000000000..a773f252816cb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+	/delete-property/ turn-on-delay-ms;
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts
new file mode 100644
index 0000000000000..0a4daec8d3ad3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1020 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts
new file mode 100644
index 0000000000000..9ffbb0fe7df86
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1036.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts
new file mode 100644
index 0000000000000..cb2fcb4896c65
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1036 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts
new file mode 100644
index 0000000000000..d43a5d8f17497
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1010.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts
new file mode 100644
index 0000000000000..f7b0acb65352c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts
new file mode 100644
index 0000000000000..387edf2b3f96b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1110.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-udoo.dts b/arch/arm/boot/dts/nxp/imx/imx6q-udoo.dts
new file mode 100644
index 0000000000000..52e9f4a211d08
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-udoo.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-udoo.dtsi"
+
+/ {
+	model = "Udoo i.MX6 Quad Board";
+	compatible = "udoo,imx6q-udoo", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
new file mode 100644
index 0000000000000..ad59b23ef27a0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
@@ -0,0 +1,355 @@
+/*
+ * Copyright 2013 CompuLab Ltd.
+ * Copyright 2016 Christopher Spinrath
+ *
+ * Based on the devicetree distributed with the vendor kernel for the
+ * Utilite Pro:
+ *	Copyright 2013 CompuLab Ltd.
+ *	Author: Valentin Raevsky <valentin@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include "imx6q-cm-fx6.dts"
+
+/ {
+	model = "CompuLab Utilite Pro";
+	compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q";
+
+	aliases {
+		ethernet1 = &eth1;
+		rtc0 = &em3027;
+		rtc1 = &snvs_rtc;
+	};
+
+	encoder {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&parallel_display_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hpd>;
+		type = "a";
+		ddc-i2c-bus = <&i2c_dvi_ddc>;
+		hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c1>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+				pagesize = <16>;
+			};
+
+			em3027: rtc@56 {
+				compatible = "emmicro,em3027";
+				reg = <0x56>;
+			};
+		};
+
+		i2c_dvi_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	parallel-display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		interface-pix-fmt = "rgb24";
+
+		port@0 {
+			reg = <0>;
+
+			parallel_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			parallel_display_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
+		};
+	};
+};
+
+/*
+ * A single IPU is not able to drive both display interfaces available on the
+ * Utilite Pro at high resolution due to its bandwidth limitation. Since the
+ * tfp410 encoder is wired up to IPU1, sever the link between IPU1 and the
+ * SoC-internal Designware HDMI encoder forcing the latter to be connected to
+ * IPU2 instead of IPU1.
+ */
+/delete-node/&ipu1_di0_hdmi;
+/delete-node/&hdmi_mux_0;
+/delete-node/&ipu1_di1_hdmi;
+/delete-node/&hdmi_mux_1;
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmicec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmicec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hpd: hpdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1mux: i2c1muxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x38
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170B9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100B9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170B9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170B9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170B9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170B9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170F9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100F9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170F9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170F9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170F9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170F9
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&parallel_display_in>;
+};
+
+&pcie {
+	pcie@0,0 {
+		reg = <0x000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* non-removable i211 ethernet card */
+		eth1: intel,i211@pcie0,0 {
+			reg = <0x010000 0 0 0 0>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	no-1-8-v;
+	broken-cd;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts
new file mode 100644
index 0000000000000..2290c1237634d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Support for Variscite DART-MX6 Carrier-board
+ *
+ * Copyright 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-var-dart.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Variscite DART-MX6 Carrier-board";
+	compatible = "variscite,dt6customboard", "fsl,imx6q";
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		brightness-levels = <0 4 8 16 32 64 128 248>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-back {
+			gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "Key Back";
+			linux,input-type = <1>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		key-home {
+			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "Key Home";
+			linux,input-type = <1>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		key-menu {
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "Key Menu";
+			linux,input-type = <1>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	panel1: lvds-panel {
+		compatible = "sgd,gktw70sdae4se", "panel-lvds";
+		backlight = <&backlight_lvds>;
+		width-mm = <153>;
+		height-mm = <86>;
+		label = "gktw70sdae4se";
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <32000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hback-porch = <39>;
+			hfront-porch = <39>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			hsync-len = <47>;
+			vsync-len = <2>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	reg_usb_h1_vbus: regulator-usbh1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "dt6-customboard-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack",
+					    "Line", "Line In";
+		simple-audio-card,routing = "Headphone Jack", "HPLOUT",
+					    "Headphone Jack", "HPROUT",
+					    "LINE1L", "Line In",
+					    "LINE1R", "Line In";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&clks IMX6QDL_CLK_CKO>;
+		};
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
+		   <&gpio4 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		wakeup-source;
+	};
+
+	rtc@68 {
+		compatible = "isil,isl12057";
+		reg = <0x68>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usdhc2 {
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-vicut1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-vicut1.dts
new file mode 100644
index 0000000000000..dd91aff3f9e2d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-vicut1.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
+
+/ {
+	model = "Kverneland UT1Q Board";
+	compatible = "kvg,vicut1q", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revb1.dts
new file mode 100644
index 0000000000000..f6ccbecff92c2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revb1.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard-revb1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Quad Board rev B1";
+	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revd1.dts
new file mode 100644
index 0000000000000..55331021d80cf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revd1.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Quad Board revD1";
+	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-wandboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard.dts
new file mode 100644
index 0000000000000..0be548beef86d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard-revc1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Quad Board";
+	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-crux.dts b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-crux.dts
new file mode 100644
index 0000000000000..bddf3822ebf73
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-crux.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Crux i.MX6Quad board";
+	compatible = "ysoft,imx6q-yapp4-crux", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts
new file mode 100644
index 0000000000000..ec6651ba4ba2e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Pegasus i.MX6Quad board";
+	compatible = "ysoft,imx6q-yapp4-pegasus", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-zii-rdu2.dts
new file mode 100644
index 0000000000000..a1c5e69d81ba5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-zii-rdu2.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2016-2017 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-zii-rdu2.dtsi"
+
+/ {
+	model = "ZII RDU2 Board";
+	compatible = "zii,imx6q-zii-rdu2", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q.dtsi
new file mode 100644
index 0000000000000..df86049a695b1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q.dtsi
@@ -0,0 +1,553 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q-pinfunc.h"
+#include "imx6qdl.dtsi"
+
+/ {
+	aliases {
+		ipu1 = &ipu2;
+		spi4 = &ecspi5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	soc: soc {
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		aips1: bus@2000000 { /* AIPS1 */
+			spba-bus@2000000 {
+				ecspi5: spi@2018000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02018000 0x4000>;
+					interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6Q_CLK_ECSPI5>,
+						 <&clks IMX6Q_CLK_ECSPI5>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+		};
+
+		sata: sata@2200000 {
+			compatible = "fsl,imx6q-ahci";
+			reg = <0x02200000 0x4000>;
+			interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_SATA>,
+				 <&clks IMX6QDL_CLK_SATA_REF_100M>,
+				 <&clks IMX6QDL_CLK_AHB>;
+			clock-names = "sata", "sata_ref", "ahb";
+			status = "disabled";
+		};
+
+		gpu_vg: gpu@2204000 {
+			compatible = "vivante,gc";
+			reg = <0x02204000 0x4000>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
+				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+			#cooling-cells = <2>;
+		};
+
+		ipu2: ipu@2800000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx6q-ipu";
+			reg = <0x02800000 0x400000>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_IPU2>,
+				 <&clks IMX6QDL_CLK_IPU2_DI0>,
+				 <&clks IMX6QDL_CLK_IPU2_DI1>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 4>;
+
+			ipu2_csi0: port@0 {
+				reg = <0>;
+
+				ipu2_csi0_from_mipi_vc2: endpoint {
+					remote-endpoint = <&mipi_vc2_to_ipu2_csi0>;
+				};
+			};
+
+			ipu2_csi1: port@1 {
+				reg = <1>;
+
+				ipu2_csi1_from_ipu2_csi1_mux: endpoint {
+					remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>;
+				};
+			};
+
+			ipu2_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu2_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu2_di0_hdmi: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&hdmi_mux_2>;
+				};
+
+				ipu2_di0_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_2>;
+				};
+
+				ipu2_di0_lvds0: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&lvds0_mux_2>;
+				};
+
+				ipu2_di0_lvds1: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&lvds1_mux_2>;
+				};
+			};
+
+			ipu2_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu2_di1_hdmi: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&hdmi_mux_3>;
+				};
+
+				ipu2_di1_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_3>;
+				};
+
+				ipu2_di1_lvds0: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&lvds0_mux_3>;
+				};
+
+				ipu2_di1_lvds1: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&lvds1_mux_3>;
+				};
+			};
+		};
+	};
+
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu1_csi0>, <&ipu1_csi1>, <&ipu2_csi0>, <&ipu2_csi1>;
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
+	};
+};
+
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 136  2>, <&iomuxc  2 141 1>, <&iomuxc  3 139 1>,
+		      <&iomuxc  4 142  2>, <&iomuxc  6 140 1>, <&iomuxc  7 144 2>,
+		      <&iomuxc  9 138  1>, <&iomuxc 10 213 3>, <&iomuxc 13  20 1>,
+		      <&iomuxc 14  19  1>, <&iomuxc 15  21 1>, <&iomuxc 16 208 1>,
+		      <&iomuxc 17 207  1>, <&iomuxc 18 210 3>, <&iomuxc 21 209 1>,
+		      <&iomuxc 22 116 10>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 191 16>, <&iomuxc 16 55 14>, <&iomuxc 30 35 1>,
+		      <&iomuxc 31  44  1>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc 0 69 16>, <&iomuxc 16 36 8>, <&iomuxc 24 45 8>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc 5 149 1>, <&iomuxc 6 126 10>, <&iomuxc 16 87 16>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc 0  85  1>, <&iomuxc  2  34  1>, <&iomuxc 4 53 1>,
+		      <&iomuxc 5 103 13>, <&iomuxc 18 150 14>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0 164 6>, <&iomuxc  6  54 1>, <&iomuxc  7 181  5>,
+		      <&iomuxc 14 186 3>, <&iomuxc 17 170 2>, <&iomuxc 19  22 12>,
+		      <&iomuxc 31  86 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>;
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu1_csi0_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+			};
+		};
+	};
+
+	ipu2_csi1_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu2_csi1_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu2_csi1_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu2_csi1_mux_to_ipu2_csi1: endpoint {
+				remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	compatible = "fsl,imx6q-hdmi";
+
+	ports {
+		port@2 {
+			reg = <2>;
+
+			hdmi_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_hdmi>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			hdmi_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_hdmi>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	compatible = "fsl,imx6q-iomuxc";
+};
+
+&ipu1_csi1 {
+	ipu1_csi1_from_mipi_vc1: endpoint {
+		remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
+	};
+};
+
+&ldb {
+	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
+		      "di0", "di1";
+
+	lvds-channel@0 {
+		port@2 {
+			reg = <2>;
+
+			lvds0_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_lvds0>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			lvds0_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		port@2 {
+			reg = <2>;
+
+			lvds1_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_lvds1>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			lvds1_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_lvds1>;
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	port@1 {
+		reg = <1>;
+
+		mipi_vc0_to_ipu1_csi0_mux: endpoint {
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+		};
+	};
+
+	port@2 {
+		reg = <2>;
+
+		mipi_vc1_to_ipu1_csi1: endpoint {
+			remote-endpoint = <&ipu1_csi1_from_mipi_vc1>;
+		};
+	};
+
+	port@3 {
+		reg = <3>;
+
+		mipi_vc2_to_ipu2_csi0: endpoint {
+			remote-endpoint = <&ipu2_csi0_from_mipi_vc2>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+
+		mipi_vc3_to_ipu2_csi1_mux: endpoint {
+			remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>;
+		};
+	};
+};
+
+&mipi_dsi {
+	ports {
+		port@2 {
+			reg = <2>;
+
+			mipi_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_mipi>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			mipi_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_mipi>;
+			};
+		};
+	};
+};
+
+&mux {
+	mux-reg-masks = <0x04 0x00080000>, /* MIPI_IPU1_MUX */
+			<0x04 0x00100000>, /* MIPI_IPU2_MUX */
+			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
+			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
+			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
+			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
+			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
+};
+
+&vpu {
+	compatible = "fsl,imx6q-vpu", "cnm,coda960";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
new file mode 100644
index 0000000000000..4cc965277c521
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -0,0 +1,1371 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module";
+	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm4 0 5000000 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	clk_ov5640_osc: clk-ov5640-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel_dpi: panel-dpi {
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel_lvds: panel-lvds {
+		compatible = "panel-lvds";
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			lvds_panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3";
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_AUDIO";
+	};
+
+	reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "DOVDD/DVDD_1.8V";
+		/* Note: The CSI module uses on-board 3.3V_SW supply */
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		regulator-name = "AVDD/AFVDD_2.8V";
+		/* Note: The CSI module uses on-board 3.3V_SW supply */
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_otg_vbus";
+		status = "disabled";
+	};
+
+	/* on module USB hub */
+	reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus_hub";
+		startup-delay-us = <2000>;
+		status = "okay";
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus";
+		vin-supply = <&reg_usb_host_vbus_hub>;
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		audio-codec = <&codec>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		model = "imx6q-apalis-sgtl5000";
+		mux-ext-port = <4>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+
+	sound_spdif: sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+		model = "imx-spdif";
+		status = "disabled";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexcan1_default>;
+	pinctrl-1 = <&pinctrl_flexcan1_sleep>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexcan2_default>;
+	pinctrl-1 = <&pinctrl_flexcan2_sleep>;
+	status = "disabled";
+};
+
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
+/* Apalis SPI1 */
+&ecspi1 {
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "disabled";
+};
+
+/* Apalis SPI2 */
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "disabled";
+};
+
+&gpio1 {
+	gpio-line-names = "MXM3_84",
+			  "MXM3_4",
+			  "MXM3_15/GPIO7",
+			  "MXM3_96",
+			  "MXM3_37",
+			  "",
+			  "MXM3_17/GPIO8",
+			  "MXM3_14",
+			  "MXM3_12",
+			  "MXM3_2",
+			  "MXM3_184",
+			  "MXM3_180",
+			  "MXM3_178",
+			  "MXM3_176",
+			  "MXM3_188",
+			  "MXM3_186",
+			  "MXM3_160",
+			  "MXM3_162",
+			  "MXM3_150",
+			  "MXM3_144",
+			  "MXM3_154",
+			  "MXM3_146",
+			  "",
+			  "",
+			  "MXM3_72";
+};
+
+&gpio2 {
+	gpio-line-names = "MXM3_148",
+			  "MXM3_152",
+			  "MXM3_156",
+			  "MXM3_158",
+			  "MXM3_1/GPIO1",
+			  "MXM3_3/GPIO2",
+			  "MXM3_5/GPIO3",
+			  "MXM3_7/GPIO4",
+			  "MXM3_95",
+			  "MXM3_6",
+			  "MXM3_8",
+			  "MXM3_123",
+			  "MXM3_126",
+			  "MXM3_128",
+			  "MXM3_130",
+			  "MXM3_132",
+			  "MXM3_253",
+			  "MXM3_251",
+			  "MXM3_283",
+			  "MXM3_281",
+			  "MXM3_279",
+			  "MXM3_277",
+			  "MXM3_243",
+			  "MXM3_235",
+			  "MXM3_231",
+			  "MXM3_229",
+			  "MXM3_233",
+			  "MXM3_198",
+			  "MXM3_275",
+			  "MXM3_273",
+			  "MXM3_207",
+			  "MXM3_122";
+};
+
+&gpio3 {
+	gpio-line-names = "MXM3_271",
+			  "MXM3_269",
+			  "MXM3_301",
+			  "MXM3_299",
+			  "MXM3_297",
+			  "MXM3_295",
+			  "MXM3_293",
+			  "MXM3_291",
+			  "MXM3_289",
+			  "MXM3_287",
+			  "MXM3_249",
+			  "MXM3_247",
+			  "MXM3_245",
+			  "MXM3_286",
+			  "MXM3_239",
+			  "MXM3_35",
+			  "MXM3_205",
+			  "MXM3_203",
+			  "MXM3_201",
+			  "MXM3_116",
+			  "MXM3_114",
+			  "MXM3_262",
+			  "MXM3_274",
+			  "MXM3_124",
+			  "MXM3_110",
+			  "MXM3_120",
+			  "MXM3_263",
+			  "MXM3_265",
+			  "",
+			  "MXM3_135",
+			  "MXM3_261",
+			  "MXM3_259";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_194",
+			  "MXM3_136",
+			  "MXM3_134",
+			  "MXM3_140",
+			  "MXM3_138",
+			  "",
+			  "MXM3_220",
+			  "",
+			  "",
+			  "MXM3_18",
+			  "MXM3_16",
+			  "",
+			  "",
+			  "MXM3_214",
+			  "MXM3_216",
+			  "MXM3_164";
+};
+
+&gpio5 {
+	gpio-line-names = "MXM3_159",
+			  "",
+			  "",
+			  "",
+			  "MXM3_257",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_200",
+			  "MXM3_196",
+			  "MXM3_204",
+			  "MXM3_202",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_191",
+			  "MXM3_197",
+			  "MXM3_77",
+			  "MXM3_195",
+			  "MXM3_221",
+			  "MXM3_225",
+			  "MXM3_223",
+			  "MXM3_227",
+			  "MXM3_209",
+			  "MXM3_211",
+			  "MXM3_118",
+			  "MXM3_112",
+			  "MXM3_187",
+			  "MXM3_185";
+};
+
+&gpio6 {
+	gpio-line-names = "MXM3_183",
+			  "MXM3_181",
+			  "MXM3_179",
+			  "MXM3_177",
+			  "MXM3_175",
+			  "MXM3_173",
+			  "MXM3_255",
+			  "MXM3_83",
+			  "MXM3_91",
+			  "MXM3_13/GPIO6",
+			  "MXM3_11/GPIO5",
+			  "MXM3_79",
+			  "",
+			  "",
+			  "MXM3_190",
+			  "MXM3_193",
+			  "MXM3_89";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_99",
+			  "MXM3_85",
+			  "MXM3_217",
+			  "MXM3_215";
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@1 {
+			reg = <1>;
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+				remote-endpoint = <&adv7280_to_ipu1_csi0_mux>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@7 {
+			interrupt-parent = <&gpio1>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+			reg = <7>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>;
+	status = "disabled";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		/* These GPIOs are muxed with the iomuxc node */
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;	/* MXM3_11 */
+		reg = <0x4a>;
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;	/* MXM3_13 */
+		status = "disabled";
+	};
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		fsl,pmic-stby-poweroff;
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1975000>;
+				regulator-min-microvolt = <400000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5150000>;
+				regulator-min-microvolt = <5000000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <1000000>;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+		};
+	};
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&reg_module_3v3_audio>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&vgen4_reg>;
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		blocks = <0x5>;
+		id = <0>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		interrupt-parent = <&gpio4>;
+		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		reg = <0x41>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC conversion time: 80 clocks */
+		st,sample-time = <4>;
+
+		stmpe_ts: stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+			status = "disabled";
+		};
+
+		stmpe_adc: stmpe_adc {
+			compatible = "st,stmpe-adc";
+			#io-channel-cells = <1>;
+			/* forbid to use ADC channels 3-0 (touch) */
+			st,norequest-mask = <0x0F>;
+		};
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	adv_7280: adv7280@21 {
+		compatible = "adi,adv7280";
+		adv,force-bt656-4;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_csi0>;
+		reg = <0x21>;
+		status = "disabled";
+
+		port {
+			adv7280_to_ipu1_csi0_mux: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
+
+	ov5640_csi_cam: ov5640_mipi@3c {
+		compatible = "ovti,ov5640";
+		AVDD-supply = <&reg_ov5640_2v8_a_vdd>;
+		DOVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
+		DVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
+		clock-names = "xclk";
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cam_mclk>;
+		/* These GPIOs are muxed with the iomuxc node */
+		powerdown-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		reg = <0x3c>;
+		reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi_from_ov5640>;
+			};
+		};
+	};
+};
+
+&ipu1_di1_disp1 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	lvds-channel@0 {
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_panel_in>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "disabled";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi_from_ov5640: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart4 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_dte>;
+	status = "disabled";
+};
+
+&uart5 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_dte>;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "disabled";
+};
+
+/* MMC1 */
+&usdhc1 {
+	bus-width = <8>;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
+	vqmmc-supply = <&reg_module_3v3>;
+	status = "disabled";
+};
+
+/* SD1 */
+&usdhc2 {
+	bus-width = <4>;
+	disable-wp;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vqmmc-supply = <&reg_module_3v3>;
+	status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
+	status = "okay";
+};
+
+&weim {
+	status = "disabled";
+};
+
+&iomuxc {
+	/* Mux the Apalis GPIOs */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
+		    >;
+
+	pinctrl_apalis_gpio1: apalisgpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio2: apalisgpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio3: apalisgpio3grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio4: apalisgpio4grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio5: apalisgpio5grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio6: apalisgpio6grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio7: apalisgpio7grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio8: apalisgpio8grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+		>;
+	};
+
+	pinctrl_cam_mclk: cammclkgrp {
+		fsl,pins = <
+			/* CAM sys_mclk */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
+			/* SPI1 cs */
+			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			/* SPI2 cs */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* Ethernet PHY reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
+			/* Ethernet PHY interrupt */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x000b1
+		>;
+	};
+
+	pinctrl_flexcan1_default: flexcan1defgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1_sleep: flexcan1slpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0
+		>;
+	};
+
+	pinctrl_flexcan2_default: flexcan2defgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+	pinctrl_flexcan2_sleep: flexcan2slpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio1io04grp {
+		fsl,pins = <
+			/* Power button */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hdmi_ddc: hdmiddcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0xb0b1
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0xb0b1
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0xb0b1
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0xb0b1
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0xb0b1
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0xb0b1
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0xb0b1
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0xb0b1
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0xb0b1
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0xb0b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
+			/* DE */
+			MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61
+			/* HSync */
+			MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61
+			/* VSync */
+			MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61
+			MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
+			MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
+			MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
+			MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
+			MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
+			MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
+			MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
+			MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
+			MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
+			MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
+			MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
+			MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
+			MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
+			MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
+			MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
+			MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
+			MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
+			MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
+			MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
+			MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
+			MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
+			MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
+			MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
+			MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
+		>;
+	};
+
+	pinctrl_ipu2_vdac: ipu2vdacgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
+			MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0xd1
+			MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0xd1
+			MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0xd1
+			MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0xf9
+			MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0xf9
+			MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0xf9
+			MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0xf9
+			MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0xf9
+			MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0xf9
+			MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0xf9
+			MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0xf9
+			MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0xf9
+			MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0xf9
+			MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0xf9
+			MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0xf9
+			MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0xf9
+			MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0xf9
+			MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0xf9
+			MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0xf9
+		>;
+	};
+
+	pinctrl_mmc_cd: mmccdgrp {
+		fsl,pins = <
+			 /* MMC1 CD */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: regusbhpwrgrp {
+		fsl,pins = <
+			/* USBH_EN */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp {
+		fsl,pins = <
+			/* USBH_HUB_EN */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp {
+		fsl,pins = <
+			/* USBO1 power en */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
+		>;
+	};
+
+	pinctrl_reset_moci: resetmocigrp {
+		fsl,pins = <
+			/* RESET_MOCI control */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
+		>;
+	};
+
+	pinctrl_sd_cd: sdcdgrp {
+		fsl,pins = <
+			/* SD1 CD */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
+			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touch_int: touchintgrp {
+		fsl,pins = <
+			/* STMPE811 interrupt */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2_dce: uart2dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4_dce: uart4dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart4_dte: uart4dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5_dce: uart5dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart5_dte: uart5dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_4bit: usdhc1-4bitgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc1_8bit: usdhc1-8bitgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
+			MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
+			MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
+			MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17071
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6.dtsi
new file mode 100644
index 0000000000000..b78ed7974ea95
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_3p3v>;
+	};
+
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <15>;
+		power-off-delay-us = <70>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+			status = "okay";
+		};
+	};
+};
+
+/* Bluetooth */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Wi-Fi */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <38400000>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x130b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x13030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1f030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1f030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b0
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b0
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b0
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x130b0 /* BT_EN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17059
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08	0x130b0 /* WL_EN */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x130b0 /* WL_IRQ */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi
new file mode 100644
index 0000000000000..2577eb4f535a1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 191000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <0>;
+		power-supply = <&reg_5v>;
+	};
+
+	disp0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_disp0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user-led {
+			label = "User LED";
+			gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+
+	panel {
+		compatible = "armadeus,st0700-adapt";
+		power-supply = <&reg_3p3v>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "fsl,imx6-armadeus-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-armadeus-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
+		   <&gpio4 10 GPIO_ACTIVE_LOW>,
+		   <&gpio4 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "semtech,sx8654";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* GSM */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_5v>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpios>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09  0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10  0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0
+		>;
+	};
+
+	pinctrl_gpios: gpiosgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x100b1
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x100b1
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x100b1
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x100b1
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x100b1
+		>;
+	};
+
+	pinctrl_gsm: gsmgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x130b0 /* GSM_POKIN */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_disp0: ipu1disp0grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x100b1
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x100b1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x100b1
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x100b1
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x100b1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x100b1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x100b1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x100b1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x100b1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x100b1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x100b1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x100b1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x100b1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x100b1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x100b1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x100b1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x100b1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x100b1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x100b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos.dtsi
new file mode 100644
index 0000000000000..baa197c90060e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos.dtsi
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	tmp103: tmp103@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ecspi4 {
+	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>;
+
+	imx6qdl-aristainetos {
+		pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>;
+		};
+
+		pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+			>;
+		};
+
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b0
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+				MX6QDL_PAD_EIM_D24__GPIO3_IO24  0x100b1
+			>;
+		};
+
+		pinctrl_ecspi4: ecspi4grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+				MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+				MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20  0x100b1
+				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO  0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC    0x1b0b0
+				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN   0x1b0b0
+				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER   0x1b0b0
+				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN  0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
+				MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
+				>;
+		};
+
+		pinctrl_gpio: gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+				MX6QDL_PAD_SD4_DAT5__GPIO2_IO13	0x1b0b0
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x10
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_ipu_disp: ipudisp1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20			0x20000
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+				>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+				MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
new file mode 100644
index 0000000000000..6b64b2fc3995b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
@@ -0,0 +1,637 @@
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW
+		    &gpio4 10 GPIO_ACTIVE_LOW
+		    &gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW &gpio2 27 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&ecspi4 {
+	cs-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio5 2 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "okay";
+
+	flash: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <04 0x8>;
+
+		regulators {
+			bcore1 {
+				regulator-name = "bcore1";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bcore2 {
+				regulator-name = "bcore2";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bpro {
+				regulator-name = "bpro";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bperi {
+				regulator-name = "bperi";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bmem {
+				regulator-name = "bmem";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2 {
+				regulator-name = "ldo2";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo3 {
+				regulator-name = "ldo3";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo4 {
+				regulator-name = "ldo4";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5 {
+				regulator-name = "ldo5";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6 {
+				regulator-name = "ldo6";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo7 {
+				regulator-name = "ldo7";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo8 {
+				regulator-name = "ldo8";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo9 {
+				regulator-name = "ldo9";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo10 {
+				regulator-name = "ldo10";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo11 {
+				regulator-name = "ldo11";
+				regulator-always-on;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bio {
+				regulator-name = "bio";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+
+	tmp103: tmp103@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	expander: tca6416@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	rtc@68 {
+		compatible = "dallas,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	eeprom@50{
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@57{
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&pcie {
+	reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio>;
+
+	pinctrl_audmux: audmux {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26   0x100b1 /* SS0# */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27  0x100b1 /* SS1# */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x100b1 /* SS0# */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02  0x100b1 /* SS1# */
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
+			MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0 /* led enable */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* LCD power enable */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0 /* led yellow */
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0 /* led red */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b0 /* led green */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0 /* led blue */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0 /* Profibus IRQ */
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0 /* FPGA IRQ */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b0 /* spi bus #2 SS driver enable */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b0b0 /* USB_OTG_ID = GPIO1_24*/
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0 /* Touchscreen IRQ */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b0 /* PCIe reset */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x1b0b0 /* backlight enable */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B	  0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B	  0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
+		fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
+	};
+
+	pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0 /* SD1 card detect input */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0 /* SD1 write protect input */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x71
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x71
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b0 /* SD2 level shifter output enable */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0 /* SD2 card detect input */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10		0x1b0b0 /* SD2 write protect input */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
new file mode 100644
index 0000000000000..5709957075044
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -0,0 +1,1309 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Toradex Colibri iMX6DL/S Module";
+	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm3 0 5000000 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	extcon_usbc_det: usbc-det {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	panel_dpi: panel-dpi {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus";
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		model = "imx6dl-colibri-sgtl5000";
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+		ssi-controller = <&ssi1>;
+	};
+
+	/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
+	sound_spdif: sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+		model = "imx-spdif";
+		status = "disabled";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>;
+	status = "okay";
+};
+
+/* Optional on SODIMM 55/63 */
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+/* Optional on SODIMM 178/188 */
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "disabled";
+};
+
+&fec {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "",
+			  "SODIMM_67",
+			  "SODIMM_180",
+			  "SODIMM_196",
+			  "SODIMM_174",
+			  "SODIMM_176",
+			  "SODIMM_194",
+			  "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_28",
+			  "SODIMM_93",
+			  "SODIMM_69",
+			  "SODIMM_99",
+			  "SODIMM_130",
+			  "SODIMM_106",
+			  "SODIMM_98",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_190",
+			  "SODIMM_51",
+			  "SODIMM_47",
+			  "SODIMM_53",
+			  "",
+			  "SODIMM_22";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_132",
+			  "SODIMM_134",
+			  "SODIMM_135",
+			  "SODIMM_133",
+			  "SODIMM_102",
+			  "SODIMM_43",
+			  "SODIMM_127",
+			  "SODIMM_37",
+			  "SODIMM_104",
+			  "SODIMM_59",
+			  "SODIMM_30",
+			  "SODIMM_100",
+			  "SODIMM_38",
+			  "SODIMM_34",
+			  "SODIMM_32",
+			  "SODIMM_36",
+			  "SODIMM_59",
+			  "SODIMM_67",
+			  "SODIMM_97",
+			  "SODIMM_79",
+			  "SODIMM_103",
+			  "SODIMM_101",
+			  "SODIMM_45",
+			  "SODIMM_105",
+			  "SODIMM_107",
+			  "SODIMM_91",
+			  "SODIMM_89",
+			  "SODIMM_150",
+			  "SODIMM_126",
+			  "SODIMM_128",
+			  "",
+			  "SODIMM_94";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_111",
+			  "SODIMM_113",
+			  "SODIMM_115",
+			  "SODIMM_117",
+			  "SODIMM_119",
+			  "SODIMM_121",
+			  "SODIMM_123",
+			  "SODIMM_125",
+			  "SODIMM_110",
+			  "SODIMM_112",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "SODIMM_118",
+			  "SODIMM_120",
+			  "SODIMM_122",
+			  "SODIMM_124",
+			  "",
+			  "SODIMM_96",
+			  "SODIMM_77",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_88",
+			  "SODIMM_90",
+			  "SODIMM_31",
+			  "SODIMM_23",
+			  "SODIMM_29",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_92",
+			  "SODIMM_81",
+			  "SODIMM_131",
+			  "SODIMM_129";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_168",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_184",
+			  "SODIMM_186",
+			  "HDMI_15",
+			  "HDMI_16",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "SODIMM_24",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_95",
+			  "",
+			  "SODIMM_86",
+			  "",
+			  "SODIMM_65",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_136",
+			  "SODIMM_138",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_146",
+			  "SODIMM_172",
+			  "SODIMM_170",
+			  "SODIMM_149",
+			  "SODIMM_151",
+			  "SODIMM_153",
+			  "SODIMM_155",
+			  "SODIMM_157",
+			  "SODIMM_159",
+			  "SODIMM_161",
+			  "SODIMM_163",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_165",
+			  "SODIMM_167";
+};
+
+&gpio6 {
+	gpio-line-names = "SODIMM_169",
+			  "SODIMM_171",
+			  "SODIMM_173",
+			  "SODIMM_175",
+			  "SODIMM_177",
+			  "SODIMM_179",
+			  "SODIMM_85",
+			  "SODIMM_166",
+			  "SODIMM_160",
+			  "SODIMM_162",
+			  "SODIMM_158",
+			  "SODIMM_164",
+			  "",
+			  "",
+			  "SODIMM_156",
+			  "SODIMM_75",
+			  "SODIMM_154",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_152";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "",
+			  "SODIMM_137";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_ddc>;
+	status = "disabled";
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		fsl,pmic-stby-poweroff;
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1975000>;
+				regulator-min-microvolt = <400000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5150000>;
+				regulator-min-microvolt = <5000000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <1000000>;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* vgen1: unused */
+
+			vgen2_reg: vgen2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
+			};
+
+			/*
+			 * +V3.3_1.8_SD1 coming off VGEN3 and supplying
+			 * the i.MX 6 NVCC_SD1.
+			 */
+			vgen3_reg: vgen3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+		};
+	};
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		lrclk-strength = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_module_3v3_audio>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&vgen4_reg>;
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		blocks = <0x5>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio6>;
+		interrupt-controller;
+		id = <0>;
+		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		reg = <0x41>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+
+		stmpe_ts: stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+			status = "disabled";
+		};
+
+		stmpe_adc: stmpe_adc {
+			compatible = "st,stmpe-adc";
+			/* forbid to use ADC channels 3-0 (touch) */
+			st,norequest-mask = <0x0F>;
+		};
+	};
+};
+
+/*
+ * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		interrupt-parent = <&gpio2>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_atmel_conn>;
+		reg = <0x4a>;
+		reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
+		status = "disabled";
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+/* Colibri PWM<B> */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+/* Colibri PWM<D> */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+/* Colibri PWM<A> */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+/* Colibri PWM<C> */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+/* Optional S/PDIF out on SODIMM 137 */
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_dte>;
+	status = "disabled";
+};
+
+/* Colibri USBH */
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+};
+
+/* Colibri USBC */
+&usbotg {
+	dr_mode = "otg";
+	extcon = <0>, <&extcon_usbc_det>;
+	status = "disabled";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
+	bus-width = <4>;
+	no-1-8-v;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_mmc_cd_sleep>;
+	vmmc-supply = <&reg_module_3v3>;
+	vqmmc-supply = <&vgen3_reg>;
+	status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_sram  &pinctrl_weim_cs0
+		     &pinctrl_weim_cs1   &pinctrl_weim_cs2
+		     &pinctrl_weim_rdnwr &pinctrl_weim_npwe>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh_oc_1>;
+
+	/* Atmel MXT touchsceen + Capacitive Touch Adapter */
+	/* NOTE: This pin group conflicts with pin groups
+	 * pinctrl_pwm1/pinctrl_pwm4. Don't use them simultaneously.
+	 */
+	pinctrl_atmel_adap: atmeladaptergrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09   0xb0b1  /* SODIMM  28 */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0xb0b1  /* SODIMM  30 */
+		>;
+	};
+
+	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+	/* NOTE: This pin group conflicts with pin groups pinctrl_weim_cs1 and
+	 * pinctrl_weim_cs2. Don't use them simultaneously.
+	 */
+	pinctrl_atmel_conn: atmelconnectorgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24  0xb0b1  /* SODIMM_107 */
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0xb0b1  /* SODIMM_106 */
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
+			MX6QDL_PAD_KEY_ROW1__AUD5_RXD	0x130b0
+		>;
+	};
+
+	pinctrl_cam_mclk: cammclkgrp {
+		fsl,pins = <
+			/* Parallel Camera CAM sys_mclk */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2	0x00b0
+		>;
+	};
+
+	/* CSI pins used as GPIOs */
+	pinctrl_csi_gpio_1: csigpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18   0x1b0b0
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x1b0b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x130b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06   0x1b0b0
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x1b0b0
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21   0x1b0b0
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20   0x1b0b0
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31   0x1b0b0
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17   0x1b0b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+			MX6QDL_PAD_SD2_CMD__GPIO1_IO11   0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_csi_gpio_2: csigpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04   0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			/* SPI CS */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO	0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI	0x100b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	((1<<30) | 0x1b0b0)
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_1: gpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20     0x1b0b0
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27      0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03     0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04     0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06     0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08     0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11     0x1b0b0
+		>;
+	};
+	pinctrl_gpio_2: gpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07       0x1b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08       0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x130b0
+		>;
+	};
+
+	pinctrl_hdmi_ddc: hdmiddcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12	0xb0b1
+			MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13	0xb0b1
+			MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14	0xb0b1
+			MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15	0xb0b1
+			MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16	0xb0b1
+			MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17	0xb0b1
+			MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18	0xb0b1
+			MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19	0xb0b1
+			MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK	0xb0b1
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC	0xb0b1
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC	0xb0b1
+			/* Disable PWM pins on camera interface */
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x40
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0xa1
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0xa1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0xa1
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0xa1
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0xa1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0xa1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0xa1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0xa1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0xa1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0xa1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0xa1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0xa1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0xa1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0xa1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0xa1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0xa1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0xa1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0xa1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0xa1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0xa1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0xa1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0xa1
+		>;
+	};
+
+	pinctrl_lvds_transceiver: lvdstxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x03030 /* SODIMM  95 */
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07   0x0b030 /* SODIMM  55 */
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x03030 /* SODIMM  63 */
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x03030 /* SODIMM  99 */
+		>;
+	};
+
+	pinctrl_mic_gnd: micgndgrp {
+		fsl,pins = <
+			/* Controls Mic GND, PU or '1' pull Mic GND to GND */
+			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
+		>;
+	};
+
+	pinctrl_mmc_cd: mmccdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x1b0b1
+		>;
+	};
+
+	pinctrl_mmc_cd_sleep: mmccdslpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x00040
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x00040
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+		fsl,pins = <
+			/* SODIMM 129 / USBH_PEN */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touch_int: gpiotouchintgrp {
+		fsl,pins = <
+			/* STMPE811 interrupt */
+			MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_dte: uart3dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbc_det: usbcdetgrp {
+		fsl,pins = <
+			/* SODIMM 137 / USBC_DET */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+			/* USBC_DET_OVERWRITE */
+			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
+			/* USBC_DET_EN */
+			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
+		>;
+	};
+
+	pinctrl_usbc_id_1: usbcid1grp {
+		fsl,pins = <
+			/* USBC_ID */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbh_oc_1: usbhoc1grp {
+		fsl,pins = <
+			/* USBH_OC */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
+		>;
+	};
+
+	/* avoid backfeeding with removed card power */
+	pinctrl_usdhc1_sleep: usdhc1sleepgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x3000
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x3000
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x3000
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x3000
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x3000
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x3000
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET	0x17059
+		>;
+	};
+
+	pinctrl_weim_cs0: weimcs0grp {
+		fsl,pins = <
+			/* nEXT_CS0 */
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs1: weimcs1grp {
+		fsl,pins = <
+			/* nEXT_CS1 */
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs2: weimcs2grp {
+		fsl,pins = <
+			/* nEXT_CS2 */
+			MX6QDL_PAD_SD2_DAT1__EIM_CS2_B	0xb0b1
+		>;
+	};
+
+	/* ADDRESS[16:18] [25] used as GPIO */
+	pinctrl_weim_gpio_1: weimgpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	/* ADDRESS[19:24] used as GPIO */
+	pinctrl_weim_gpio_2: weimgpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	/* DATA[16:31] used as GPIO */
+	pinctrl_weim_gpio_3: weimgpio3grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b0
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b0
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x1b0b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
+		>;
+	};
+
+	/* DQM[0:3] used as GPIO */
+	pinctrl_weim_gpio_4: weimgpio4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
+		>;
+	};
+
+	/* RDY used as GPIO */
+	pinctrl_weim_gpio_5: weimgpio5grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0
+		>;
+	};
+
+	/* ADDRESS[16] DATA[30] used as GPIO */
+	pinctrl_weim_gpio_6: weimgpio6grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_weim_npwe: weimnpwegrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
+		>;
+	};
+
+	pinctrl_weim_sram: weimsramgrp {
+		fsl,pins = <
+			/* Data */
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
+			/* Address */
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			/* Ctrl */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_rdnwr: weimrdnwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
+			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
new file mode 100644
index 0000000000000..1e530d892b768
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
@@ -0,0 +1,270 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 9 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_ir>;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
+
+		led-1 {
+			active-low;
+			label = "imx6:red:front";
+			max-brightness = <248>;
+			pwms = <&pwm1 0 50000>;
+		};
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "Integrated SPDIF";
+		/* IMX6 doesn't implement this yet */
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio_key>;
+		pinctrl-names = "default";
+
+		button_0 {
+			label = "Button 0";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
+
+	status = "okay";
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	cubox_i {
+		pinctrl_cubox_i_hdmi: cubox-i-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
+		pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_cubox_i_ir: cubox-i-ir {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
+			>;
+		};
+
+		pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
+			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
+		};
+
+		pinctrl_cubox_i_spdif: cubox-i-spdif {
+			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
+		};
+
+		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
+			fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+		};
+
+		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
+		};
+
+		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
+			/*
+			 * The Cubox-i pulls ID low, but as it's pointless
+			 * leaving it as a pull-up, even if it is just 10uA.
+			 */
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+			>;
+		};
+
+		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
+		};
+
+		pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
+			>;
+		};
+
+		pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+			>;
+		};
+
+		pinctrl_gpio_key: gpio-key {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x17059
+			>;
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
+	vbus-supply = <&v_usb2>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
+	vmmc-supply = <&vcc_3v3>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_5v0>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi
new file mode 100644
index 0000000000000..2c1d6f28e6950
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dummy_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "dummy-supply";
+		};
+
+		reg_usb_otg_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf040b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	status = "okay";
+	phy-mode = "rgmii";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-dfi-fs700-m60 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
+				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
+				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+			>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 { /* module slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 { /* baseboard slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+};
+
+&usdhc4 { /* eMMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-drc02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-drc02.dtsi
new file mode 100644
index 0000000000000..702cd4a1b2e61
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-drc02.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/*
+ * Special SoM hardware required which uses the pins from micro SD card. The
+ * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can2
+ * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. Therefore the micro SD
+ * card must be disabled and the uart1 rts/cts must be output on other DHCOM
+ * pins, see uart1 and usdhc3 node below.
+ */
+&can2 {
+	status = "okay";
+};
+
+&gpio1 {
+	/*
+	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+	 * GPIO line, however the i.MX6 UART driver assumes RX happens
+	 * during TX anyway and that it only controls drive enable DE
+	 * line. Hence, the RX is always enabled here.
+	 */
+	rs485-rx-en-hog {
+		gpio-hog;
+		gpios = <18 0>; /* GPIO Q */
+		line-name = "rs485-rx-en";
+		output-low;
+	};
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "DRC02-In1", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "DHCOM-E", "DRC02-In2", "DHCOM-H",
+		"DHCOM-I", "DRC02-HW0", "", "", "", "", "", "",
+		"", "", "", "", "DRC02-Out1", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "DRC02-Out2", "", "", "SOM-HW1", "",
+		"", "", "", "", "", "", "DRC02-HW2", "DRC02-HW1",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&uart1 {
+	/*
+	 * Due to the use of can2 the signals for can2 Tx and Rx are routed to
+	 * DHCOM UART1 rts/cts pins. Therefore this UART have to use DHCOM GPIOs
+	 * for rts/cts. So configure DHCOM GPIO I as rts and GPIO M as cts.
+	 */
+	/delete-property/ uart-has-rtscts;
+	cts-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; /* GPIO M */
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_dhcom_i &pinctrl_dhcom_m>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+};
+
+&uart5 {
+	/*
+	 * On DRC02 this UART is used as RS485 interface and RS485_TX_En is
+	 * controlled by DHCOM GPIO P. So remove rts/cts pins and the property
+	 * uart-has-rtscts from this UART and add the DHCOM GPIO P pin via
+	 * rts-gpios. The RS485_RX_En is controlled by DHCOM GPIO Q, see gpio1
+	 * node above.
+	 */
+	/delete-property/ uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-0 = <&pinctrl_uart5_core &pinctrl_dhcom_p &pinctrl_dhcom_q>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; /* GPIO P */
+};
+
+&usbh1 {
+	disable-over-current;
+};
+
+&usdhc2 { /* SD card */
+	status = "okay";
+};
+
+&usdhc3 {
+	/*
+	 * Due to the use of can2 the micro SD card on module have to be
+	 * disabled, because the pins SD3_DAT0 and SD3_DAT1 are muxed as
+	 * can2 Tx and Rx.
+	 */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			/*
+			 * The following DHCOM GPIOs are used on this board.
+			 * Therefore, they have been removed from the list below.
+			 * I: uart1 rts
+			 * M: uart1 cts
+			 * P: uart5 rs485-tx-en
+			 * Q: uart5 rs485-rx-en
+			 */
+			&pinctrl_hog_base
+			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+			&pinctrl_dhcom_g &pinctrl_dhcom_h
+			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+
+	pinctrl_uart5_core: uart5-core-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2.dtsi
new file mode 100644
index 0000000000000..6248b126b5578
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2021 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		compatible = "fixed-clock";
+	};
+
+	display_bl: display-bl {
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		compatible = "pwm-backlight";
+		default-brightness-level = <8>;
+		enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
+		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif &pinctrl_dhcom_g>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	gpio-keys {
+		#size-cells = <0>;
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			pinctrl-0 = <&pinctrl_dhcom_a>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			pinctrl-0 = <&pinctrl_dhcom_b>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			pinctrl-0 = <&pinctrl_dhcom_c>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; /* GPIO D */
+			label = "TA4-GPIO-D";
+			linux,code = <KEY_D>;
+			pinctrl-0 = <&pinctrl_dhcom_d>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		/*
+		 * Disable led-5, because GPIO E is
+		 * already used as touch interrupt.
+		 */
+		led-5 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* GPIO E */
+			pinctrl-0 = <&pinctrl_dhcom_e>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		led-6 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; /* GPIO F */
+			pinctrl-0 = <&pinctrl_dhcom_f>;
+			pinctrl-names = "default";
+		};
+
+		led-7 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* GPIO H */
+			pinctrl-0 = <&pinctrl_dhcom_h>;
+			pinctrl-names = "default";
+		};
+
+		led-8 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+
+	panel {
+		backlight = <&display_bl>;
+		compatible = "edt,etm0700g0edh6";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	sound {
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx-sgtl5000";
+		mux-ext-port = <3>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	pinctrl-0 = <&pinctrl_audmux_ext>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "disabled";
+};
+
+/* 1G ethernet */
+/delete-node/ &ethphy0;
+&fec {
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy7>;
+	pinctrl-0 = <&pinctrl_enet_1G>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy7: ethernet-phy@7 { /* KSZ 9021 */
+			compatible = "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio1>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy7>;
+			pinctrl-names = "default";
+			reg = <7>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&sw2_reg>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		pinctrl-0 = <&pinctrl_dhcom_e>;
+		pinctrl-names = "default";
+		reg = <0x38>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pcie {
+	pinctrl-0 = <&pinctrl_pcie &pinctrl_dhcom_j>;
+	reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; /* GPIO J */
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+};
+
+&usdhc2 { /* SD card */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			/*
+			 * The following DHCOM GPIOs are used on this board.
+			 * Therefore, they have been removed from the list below.
+			 * A: key TA1
+			 * B: key TA2
+			 * C: key TA3
+			 * D: key TA4
+			 * E: touchscreen
+			 * F: led6
+			 * G: backlight enable
+			 * H: led7
+			 * I: led8
+			 * J: PCIe reset
+			 */
+			&pinctrl_hog_base
+			&pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+
+	pinctrl_audmux_ext: audmux-ext-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+		>;
+	};
+
+	pinctrl_enet_1G: enet-1G-grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+		>;
+	};
+
+	pinctrl_ethphy7: ethphy7-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0xb1 /* WOL */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0xb0 /* Reset */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0xb1 /* Int */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-picoitx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-picoitx.dtsi
new file mode 100644
index 0000000000000..4cd4cb9543c84
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-picoitx.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "DHCOM-A", "", "DHCOM-B", "PicoITX-In2", "", "",
+		"", "", "", "", "", "", "", "",
+		"DHCOM-R", "DHCOM-S", "DHCOM-Q", "DHCOM-T", "DHCOM-U", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "PicoITX-In1", "DHCOM-INT", "DHCOM-H",
+		"DHCOM-I", "PicoITX-HW2", "", "", "", "", "", "",
+		"", "", "", "", "PicoITX-Out1", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "PicoITX-Out2", "", "", "SOM-HW1", "",
+		"", "", "", "", "", "", "PicoITX-HW0", "PicoITX-HW1",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			/*
+			 * The following DHCOM GPIOs are used on this board.
+			 * Therefore, they have been removed from the list below.
+			 * I: yellow led
+			 */
+			&pinctrl_hog_base
+			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+			&pinctrl_dhcom_g &pinctrl_dhcom_h
+			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi
new file mode 100644
index 0000000000000..eaa87b3331648
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi
@@ -0,0 +1,850 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2021 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c1;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc4;
+		mmc3 = &usdhc1;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		serial0 = &uart1;
+		serial1 = &uart5;
+		serial2 = &uart4;
+		serial3 = &uart2;
+		serial4 = &uart3;
+	};
+
+	memory@10000000 { /* Appropriate memory size will be filled by U-Boot */
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	reg_3p3v: regulator-3P3V {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3P3V";
+	};
+
+	reg_eth_vio: regulator-eth-vio {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 7 0>;
+		pinctrl-0 = <&pinctrl_enet_vio>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "eth_vio";
+		vin-supply = <&sw2_reg>;
+	};
+
+	/* OE pin of the latch is low active */
+	reg_latch_oe_on: regulator-latch-oe-on {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 22 0>;
+		regulator-always-on;
+		regulator-name = "latch_oe_on";
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 31 0>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "usb_h1_vbus";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "usb_otg_vbus";
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * Special SoM hardware required which uses the pins from micro SD card. The
+ * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can2
+ * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. So to enable can2 on
+ * the board device tree file, the micro SD card must be disabled and the uart1
+ * rts/cts must be disabled or output on other DHCOM pins.
+ */
+&can2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 { /* S25FL116K */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&fec {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-0 = <&pinctrl_enet_100M>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */
+			compatible = "ethernet-phy-id0007.c0f0",
+				     "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio4>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reg = <0>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "DHCOM-A", "", "DHCOM-B", "DHCOM-C", "", "",
+		"", "", "", "", "", "", "", "",
+		"DHCOM-R", "DHCOM-S", "DHCOM-Q", "DHCOM-T", "DHCOM-U", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"SOM-HW2", "", "", "SOM-HW0", "", "SOM-MEM1", "SOM-MEM0", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "DHCOM-G", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "DHCOM-E", "DHCOM-INT", "DHCOM-H",
+		"DHCOM-I", "DHCOM-L", "", "", "", "", "", "",
+		"", "", "", "", "DHCOM-F", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "DHCOM-V", "DHCOM-W", "", "DHCOM-O", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "DHCOM-D", "", "", "SOM-HW1", "",
+		"", "", "", "", "", "", "DHCOM-J", "DHCOM-K",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"DHCOM-M", "DHCOM-N", "", "", "", "", "", "",
+		"", "", "", "", "", "DHCOM-P", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	/*
+	 * Info: According to erratum ERR007805 clock frequency limit is 375000.
+	 * The erratum for i.MX6S/DL is here [1] and for i.MX6Q/D is here [2].
+	 * [1] https://www.nxp.com/docs/en/errata/IMX6SDLCE.pdf
+	 * [2] https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c2 {
+	/* Info: Clock frequency limit is 375000 (for details see i2c1) */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	/* Info: Clock frequency limit is 375000 (for details see i2c1) */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		reg = <0x3c>;
+
+		regulators {
+			sw1_reg: sw1 {
+				lltc,fb-voltage-divider = <100000 110000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1527272>;
+				regulator-min-microvolt = <787500>;
+				regulator-ramp-delay = <7000>;
+				regulator-suspend-mem-microvolt = <1040000>;
+			};
+
+			sw2_reg: sw2 {
+				lltc,fb-voltage-divider = <100000 28000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3657142>;
+				regulator-min-microvolt = <1885714>;
+				regulator-ramp-delay = <7000>;
+			};
+
+			sw3_reg: sw3 {
+				lltc,fb-voltage-divider = <100000 110000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1527272>;
+				regulator-min-microvolt = <787500>;
+				regulator-ramp-delay = <7000>;
+				regulator-suspend-mem-microvolt = <980000>;
+			};
+
+			sw4_reg: sw4 {
+				lltc,fb-voltage-divider = <100000 93100>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1659291>;
+				regulator-min-microvolt = <855571>;
+				regulator-ramp-delay = <7000>;
+			};
+
+			ldo1_reg: ldo1 {
+				lltc,fb-voltage-divider = <102000 29400>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3240306>;
+				regulator-min-microvolt = <3240306>;
+			};
+
+			ldo2_reg: ldo2 {
+				lltc,fb-voltage-divider = <100000 41200>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2484708>;
+				regulator-min-microvolt = <2484708>;
+			};
+		};
+	};
+
+	touchscreen@49 { /* TSC2004 */
+		compatible = "ti,tsc2004";
+		interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_tsc2004>;
+		pinctrl-names = "default";
+		reg = <0x49>;
+		vio-supply = <&reg_3p3v>;
+		status = "disabled";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	rtc_i2c: rtc@56 {
+		compatible = "microcrystal,rv3029";
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_rtc>;
+		pinctrl-names = "default";
+		reg = <0x56>;
+	};
+};
+
+&pcie {
+	pinctrl-0 = <&pinctrl_pcie>;
+	pinctrl-names = "default";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+};
+
+&reg_arm {
+	vin-supply = <&sw3_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
+&uart1 { /* DHCOM UART1 */
+	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 { /* DHCOM UART3 */
+	pinctrl-0 = <&pinctrl_uart4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart5 { /* DHCOM UART2 */
+	pinctrl-0 = <&pinctrl_uart5>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	pinctrl-names = "default";
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	dr_mode = "otg";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	pinctrl-names = "default";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usdhc2 { /* External SD card via DHCOM */
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&usdhc3 { /* Micro SD card on module */
+	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	keep-power-in-suspend;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usdhc4 { /* eMMC on module */
+	bus-width = <8>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&weim {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	fsl,weim-cs-gpr = <&gpr>;
+	pinctrl-0 = <&pinctrl_weim &pinctrl_weim_cs0 &pinctrl_weim_cs1>;
+	pinctrl-names = "default";
+	/* It is necessary to setup 2x 64MB otherwise setting gpr fails */
+	ranges = <0 0 0x08000000 0x04000000>, /* CS0 */
+		 <1 0 0x0c000000 0x04000000>; /* CS1 */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			&pinctrl_hog_base
+			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+			&pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
+			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+
+	pinctrl_hog_base: hog-base-grp {
+		fsl,pins = <
+			/* GPIOs for memory coding */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x120b0
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x120b0
+			/* GPIOs for hardware coding */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x120b0
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x120b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x120b0
+		>;
+	};
+
+	/* DHCOM GPIOs */
+	pinctrl_dhcom_a: dhcom-a-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x400120b0>;
+	};
+
+	pinctrl_dhcom_b: dhcom-b-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x400120b0>;
+	};
+
+	pinctrl_dhcom_c: dhcom-c-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x400120b0>;
+	};
+
+	pinctrl_dhcom_d: dhcom-d-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x400120b0>;
+	};
+
+	pinctrl_dhcom_e: dhcom-e-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x400120b0>;
+	};
+
+	pinctrl_dhcom_f: dhcom-f-grp {
+		fsl,pins = <MX6QDL_PAD_DI0_PIN4__GPIO4_IO20	0x400120b0>;
+	};
+
+	pinctrl_dhcom_g: dhcom-g-grp {
+		fsl,pins = <MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x400120b0>;
+	};
+
+	pinctrl_dhcom_h: dhcom-h-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW0__GPIO4_IO07	0x400120b0>;
+	};
+
+	pinctrl_dhcom_i: dhcom-i-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_COL1__GPIO4_IO08	0x400120b0>;
+	};
+
+	pinctrl_dhcom_j: dhcom-j-grp {
+		fsl,pins = <MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x400120b0>;
+	};
+
+	pinctrl_dhcom_k: dhcom-k-grp {
+		fsl,pins = <MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x400120b0>;
+	};
+
+	pinctrl_dhcom_l: dhcom-l-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW1__GPIO4_IO09	0x400120b0>;
+	};
+
+	pinctrl_dhcom_m: dhcom-m-grp {
+		fsl,pins = <MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x400120b0>;
+	};
+
+	pinctrl_dhcom_n: dhcom-n-grp {
+		fsl,pins = <MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x400120b0>;
+	};
+
+	pinctrl_dhcom_o: dhcom-o-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x400120b0>;
+	};
+
+	pinctrl_dhcom_p: dhcom-p-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x400120b0>;
+	};
+
+	pinctrl_dhcom_q: dhcom-q-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_CMD__GPIO1_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_r: dhcom-r-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_DAT0__GPIO1_IO16	0x400120b0>;
+	};
+
+	pinctrl_dhcom_s: dhcom-s-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_DAT1__GPIO1_IO17	0x400120b0>;
+	};
+
+	pinctrl_dhcom_t: dhcom-t-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_DAT2__GPIO1_IO19	0x400120b0>;
+	};
+
+	pinctrl_dhcom_u: dhcom-u-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_CLK__GPIO1_IO20	0x400120b0>;
+	};
+
+	pinctrl_dhcom_v: dhcom-v-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_w: dhcom-w-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x400120b0>;
+	};
+
+	pinctrl_dhcom_int: dhcom-int-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x400120b0>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet_100M: enet-100M-grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_enet_vio: enet-vio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x120b0
+		>;
+	};
+
+	pinctrl_ethphy0: ethphy0-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0xb0 /* Reset */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0xb1 /* Int */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
+		>;
+	};
+
+	pinctrl_pcie: pcie-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* Wake */
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x120b0
+		>;
+	};
+
+	pinctrl_tsc2004: tsc2004-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x120b0
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x4001b0b1
+			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x4001b0b1
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x4001b0b1
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x4001b0b1
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x4001b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B	0x4001b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x120b0
+			MX6QDL_PAD_EIM_D30__USB_H1_OC		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotg-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x120b0
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x120b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_weim: weim-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0a6
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0a6
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0a6
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0a6
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0a6
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0a6
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0a6
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0a6
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0a6
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0a6
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0a6
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0a6
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0a6
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0a6
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0a6
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0a6
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B		0xb060 /* LE */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0a6
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0a6 /* WE */
+		>;
+	};
+
+	pinctrl_weim_cs0: weim-cs0-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs1: weim-cs1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B		0xb0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ds.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ds.dtsi
new file mode 100644
index 0000000000000..f7e5175556977
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ds.dtsi
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2021 Dillon Min <dillon.minfei@gmail.com>
+//
+// Based on imx6qdl-sabresd.dtsi which is:
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov2659_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_gpio>;
+	status = "okay";
+
+	m25p80: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	ov2659: camera@30 {
+		compatible = "ovti,ov2659";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov2659>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xvclk";
+		reg = <0x30>;
+		powerdown-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		status = "okay";
+
+		port {
+			ov2659_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				link-frequencies = /bits/ 64 <70000000>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1_gpio: ecspi1grpgpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10         0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+		>;
+	};
+
+	pinctrl_ov2659: ov2659grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1grpgpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
+		>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "disabled";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
new file mode 100644
index 0000000000000..c4e146f3341bb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+/ {
+	aliases {
+		boardid = &boardid;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		mmc3 = &usdhc4;
+	};
+
+	reg_wall_5p0: reg-wall5p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "Main-Supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base3p3: reg-base3p3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "3V3-avari";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base1p5: reg-base1p5 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_base3p3>;
+		regulator-name = "1V5-avari";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_usb_otg: reg-otgvbus {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	clk_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency  = <12000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "emCON-avari-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&ecspi2 {
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_codec>;
+		VDDA-supply = <&reg_base3p3>;
+		VDDIO-supply = <&reg_base3p3>;
+	};
+
+	captouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	boardid: gpio@3a {
+		compatible = "nxp,pca8574";
+		reg = <0x3a>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&rgb_encoder {
+	status = "okay";
+};
+
+&rgb_panel {
+	compatible = "edt,etm0700g0bdh6";
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	uart-has-rtscts;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
new file mode 100644
index 0000000000000..ee2dd75cead6d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+
+	model = "emtrion SoM emCON-MX6";
+	compatible = "emtrion,emcon-mx6";
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &ds1307;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_emcon_wake>;
+
+		wake {
+			label = "Wake";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	som_leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_som_leds>;
+
+		led-green {
+			label = "som:green";
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-red {
+			label = "som:red";
+			gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+	};
+
+	lvds_backlight: lvds-backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_bl>;
+		enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm1 0 50000>;
+		brightness-levels = <
+			0 4 8 16 32 64 80 96 112
+			128 144 160 176 250
+		>;
+		default-brightness-level = <13>;
+		status = "okay";
+	};
+
+	pwm_fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		pwms = <&pwm4 0 50000>;
+		cooling-levels = <0 64 127 191 255>;
+		status = "disabled";
+	};
+
+
+	rgb_encoder: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb24_display>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			rgb_encoder_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			rgb_encoder_out: endpoint {
+				remote-endpoint = <&rgb_panel_in>;
+			};
+		};
+	};
+
+	rgb_panel: lcd {
+		backlight = <&rgb_backlight>;
+		power-supply = <&reg_parallel_disp>;
+
+		port {
+			rgb_panel_in: endpoint {
+				remote-endpoint = <&rgb_encoder_out>;
+			};
+		};
+	};
+
+	reg_parallel_disp: reg-parallel-display {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb_bl_en>;
+		regulator-name = "LCD-Supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds_disp: reg-lvds-display {
+		compatible = "regulator-fixed";
+		regulator-name = "LVDS-Supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	rgb_backlight: rgb-backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb_bl>;
+		enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <
+			250 176 160 144 128 112
+			96 80 64 48 32 16 8 1
+		>;
+		default-brightness-level = <13>;
+		status = "okay";
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
+		<&gpio2 27 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nor_flash>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <50>;
+	phy-supply = <&vdd_1V8_reg>;
+	phy-handle = <&ksz9031>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ksz9031: phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+			rxdv-skew-ps = <480>;
+			txen-skew-ps = <480>;
+			rxd0-skew-ps = <480>;
+			rxd1-skew-ps = <480>;
+			rxd2-skew-ps = <480>;
+			rxd3-skew-ps = <480>;
+			txd0-skew-ps = <420>;
+			txd1-skew-ps = <420>;
+			txd2-skew-ps = <360>;
+			txd3-skew-ps = <360>;
+			txc-skew-ps = <1020>;
+			rxc-skew-ps = <960>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	da9063: pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			wakeup-source;
+		};
+
+		watchdog {
+			compatible = "dlg,da9063-watchdog";
+			timeout-sec = <0>;
+		};
+
+		regulators {
+			vddcore_reg: bcore1 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <2>;
+				regulator-name = "DA9063_CORE";
+				regulator-always-on;
+			};
+
+			vddsoc_reg: bcore2 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <2>;
+				regulator-name = "DA9063_SOC";
+				regulator-always-on;
+			};
+
+			vdd_ddr3_reg: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <2>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <2>;
+				regulator-always-on;
+			};
+
+			vdd_sata_reg: ldo3 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+			vdd_mipi_reg: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_mx6_snvs_reg: ldo5 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_hdmi_reg: ldo6 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_pcie_reg: ldo7 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_1V8_reg: ldo8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdd_3V3_sdc_reg: ldo9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_1V2_reg: ldo10 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	ds1307: rtc@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+&iomuxc {
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x1b060
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x130B0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x1b060
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x1b0b1
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_cpi1: csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC	0x1b0b1
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b1
+		>;
+	};
+
+	/*camera2-pinctrl is in imx6q-emcon.dtsi or imx6dl-emcon.dtsi*/
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x100b1
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27			0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x100b1
+		>;
+	};
+
+	pinctrl_emcon_gpio1: emcongpio1 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio2: emcongpio2 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio3: emcongpio3 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio4: emcongpio4 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio5: emcongpio5 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio6: emcongpio6 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio7: emcongpio7 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio8: emcongpio8 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_irq_a: emconirqa {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07		0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_irq_b: emconirqb {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15		0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_irq_c: emconirqc {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16		0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_irq_pwr: emconirqpwr {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_wake: emconwake {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02			0x1b0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x4001a0b1
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b058
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30		0x1b0b0
+		 >;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4000b070
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b870
+		>;
+	};
+
+	pinctrl_irq_touch1: irqtouch1 {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05			0x0b0b1
+		>;
+	};
+
+	pinctrl_irq_touch2: irqtouch2 {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31			0x0b0b1
+		>;
+	};
+
+	pinctrl_lvds_bl: lvdsbacklightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT			0x0b0b1
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09		0x0b0b1
+		>;
+	};
+
+	pinctrl_lvds_reg: lvdsreggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__GPIO7_IO10			0x0b0b1
+		>;
+	};
+
+
+	pinctrl_nor_flash: norflashgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11		0x1b0b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK			0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI			0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO			0x100b1
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b1
+		>;
+	};
+
+	pinctrl_pcie_ctrl: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x1b0b1
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b1
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x0b0b1
+		>;
+	};
+
+	pinctrl_pwm_fan: pwmfan {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT			0x0b0b1
+		>;
+	};
+
+	pinctrl_rgb_bl: rgbbacklightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT			0x0b0b1
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08		0x0b0b1
+		>;
+	};
+
+	pinctrl_rgb_bl_en: rgbenable {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__GPIO7_IO09			0x0b0b1
+		>;
+	};
+
+	pinctrl_rgb24_display: rgbgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_secure: securegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13			0x1b0b1
+		>;
+	};
+
+	pinctrl_som_leds: somledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00			0x0b0b1
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01			0x0b0b1
+		>;
+	};
+
+	pinctrl_spdif_in: spdifin {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN			0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif_out: spdifout {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT			0x13091
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B		0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B		0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_host1: usbhgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__USB_H1_PWR			0x1B058
+			MX6QDL_PAD_EIM_D30__USB_H1_OC			0x1B058
+		>;
+	};
+
+	pinctrl_usb_otg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID		0x17059
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07			0x17059
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x17059
+			MX6QDL_PAD_GPIO_1__SD1_CD_B			0x1b0b1
+			MX6QDL_PAD_DI0_PIN4__SD1_WP			0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD			0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK			0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0			0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1			0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2			0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3			0x17059
+			MX6QDL_PAD_GPIO_4__SD2_CD_B			0x1b0b1
+			MX6QDL_PAD_GPIO_2__SD2_WP			0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17059
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&rgb_encoder_in>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_ctrl>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	disable-gpio = <&gpio2 22 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_host1>;
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg>;
+	vbus-supply = <&reg_usb_otg>;
+	dr_mode = "peripheral";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	fsl,wp-controller;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	fsl,wp-controller;
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+/******device power Management*********/
+
+&cpu0 {
+	voltage-tolerance = <2>;
+};
+
+&reg_arm {
+	vin-supply = <&vddcore_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&vddsoc_reg>;
+};
+
+/*******Disabled HW following***********/
+
+&snvs_rtc {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
new file mode 100644
index 0000000000000..e75e1a5364b85
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
@@ -0,0 +1,638 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x0001b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x4001b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
new file mode 100644
index 0000000000000..47d9a8d08197d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
@@ -0,0 +1,795 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: led-user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_AUD_1P8: Audio codec */
+			reg_aud_1p8v: ldo3 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>;
+		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0 /* AUD4_MCK */
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE_RST# */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0 /* OTG_PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
new file mode 100644
index 0000000000000..fb1d29abe0991
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
@@ -0,0 +1,784 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: led-user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_AUD_1P8: Audio codec */
+			reg_aud_1p8v: ldo3 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 2>;
+		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
new file mode 100644
index 0000000000000..a642be45ffe2e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
@@ -0,0 +1,877 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: led-user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_can1_stby: regulator-can1-stby {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_reg_can1>;
+			regulator-name = "can1_stby";
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		reg_usb_h1_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound-analog {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
+	status = "okay";
+
+	mux-ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	mux-aud5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+		};
+
+		fan-controller@2c {
+			compatible = "gw,gsc-fan";
+			reg = <0x2c>;
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&sw4_reg>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>;
+		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default", "state_dio";
+	pinctrl-0 = <&pinctrl_pwm4_backlight>;
+	pinctrl-1 = <&pinctrl_pwm4_dio>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+			MX6QDL_PAD_EIM_D25__AUD5_RXC            0x130b0
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD        0x130b0
+			MX6QDL_PAD_EIM_D24__AUD5_RXFS           0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_ecspi2: escpi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4_backlight: pwm4grpbacklight {
+		fsl,pins = <
+			/* LVDS_PWM J6.5 */
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4_dio: pwm4grpdio {
+		fsl,pins = <
+			/* DIO3 J16.4 */
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
new file mode 100644
index 0000000000000..29960d1cf6a03
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
@@ -0,0 +1,695 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/tda1997x.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound-digital {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tda1997x-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&hdmi_receiver>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	mux-aud5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8a";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0b";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_3P3 (1+R1/R2 = 1.281) */
+			reg_3p3: sw4 {
+				regulator-name = "vdd3p3";
+				regulator-min-microvolt = <1880000>;
+				regulator-max-microvolt = <3647000>;
+				lltc,fb-voltage-divider = <200000 56200>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */
+			reg_1p8a: ldo2 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1816125>;
+				regulator-max-microvolt = <1816125>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8b: HDMI In analog */
+			reg_1p8b: ldo3 {
+				regulator-name = "vdd1p8b";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	gpio_exp: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hdmi_receiver: hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3>;
+		AVDD-supply = <&reg_1p8b>;
+		DVDD-supply = <&reg_1p8a>;
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+		 * and Y[11:4] across 16bits in the same cycle
+		 * which we map to VP[15:08]<->CSI_DATA[19:12]
+		 */
+		nxp,vidout-portcfg =
+			/*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
+			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+			/*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
+			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+			/*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
+			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+			/*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
+			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <16>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
+	bus-width = <16>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT14__AUD5_RXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS	0x130b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1_csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_tda1997x: tda1997xgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
new file mode 100644
index 0000000000000..77ae611b817a4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
@@ -0,0 +1,519 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2014 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: led-user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay"; };
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x13059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
new file mode 100644
index 0000000000000..7f16c602cc075
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
@@ -0,0 +1,738 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8a";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0b";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_3P3 (1+R1/R2 = 1.281) */
+			reg_3p3v: sw4 {
+				regulator-name = "vdd3p3";
+				regulator-min-microvolt = <1880000>;
+				regulator-max-microvolt = <3647000>;
+				lltc,fb-voltage-divider = <200000 56200>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */
+			reg_1p8a: ldo2 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1816125>;
+				regulator-max-microvolt = <1816125>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8b: microSD VDD_1P8 */
+			reg_1p8b: ldo3 {
+				regulator-name = "vdd1p8b";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x0001b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x4001b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
new file mode 100644
index 0000000000000..46cf4080fec38
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
@@ -0,0 +1,931 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+			>;
+		default-brightness-level = <100>;
+	};
+
+	backlight-keypad {
+		compatible = "gpio-backlight";
+		gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: led-user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "12P0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1p4v: regulator-vddsoc {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_soc";
+		regulator-min-microvolt = <1400000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an2";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	ds1672: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	tca8418: keypad@34 {
+		compatible = "ti,tca8418";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_keypad>;
+		reg = <0x34>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0)
+			         MATRIX_KEY(0x00, 0x00, BTN_1)
+			         MATRIX_KEY(0x01, 0x01, BTN_2)
+			         MATRIX_KEY(0x01, 0x00, BTN_3)
+			         MATRIX_KEY(0x02, 0x00, BTN_4)
+			         MATRIX_KEY(0x00, 0x03, BTN_5)
+			         MATRIX_KEY(0x00, 0x02, BTN_6)
+			         MATRIX_KEY(0x01, 0x03, BTN_7)
+			         MATRIX_KEY(0x01, 0x02, BTN_8)
+			         MATRIX_KEY(0x02, 0x02, BTN_9)
+		>;
+		keypad,num-rows = <4>;
+		keypad,num-columns = <4>;
+	};
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.931) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <796551>;
+				regulator-max-microvolt = <1544827>;
+				lltc,fb-voltage-divider = <243000 261000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+				linux,phandle = <&reg_vdd_arm>;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw4 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */
+			reg_1p0v: ldo2 {
+				regulator-name = "vdd1p0";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1050000>;
+				lltc,fb-voltage-divider = <78700 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_AUD_1P8: Audio codec */
+			reg_aud_1p8v: ldo3 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts: touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			/* AUD4 */
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+			/* AUD6 */
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x130b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x130b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x130b0
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
+		>;
+	};
+
+	pinctrl_flexcan: flexcangrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x4001b0b0 /* DIOI2C_DIS# */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x0001b0b0 /* LVDS_TOUCH_IRQ# */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x0001b0b0 /* LVDS_BACKEN */
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x1b0b0
+		>;
+	};
+
+	pinctrl_keypad: keypadgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x0001b0b0 /* KEYPAD_IRQ# */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x0001b0b0 /* KEYPAD_LED_EN */
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b0    /* PCI_RST# */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* USBHUB_RST# */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x170f9
+			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x170f9
+			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x170f9
+			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
new file mode 100644
index 0000000000000..a74cde0501589
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
@@ -0,0 +1,793 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+			>;
+		default-brightness-level = <100>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 30 0>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_12p0: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "12P0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320";
+		model = "imx-tlv320";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&tlv320aic3105>;
+		/* routing of sink, source */
+		audio-routing =
+			/* TLV320 LINE1L pin <-> Mic Jack connector */
+			"LINE1L", "Mic Jack",
+			/* board Headphone Jack <-> HPOUT */
+			"Headphone Jack", "HPLOUT",
+			"Headphone Jack", "HPROUT",
+			"Mic Jack", "Mic Bias";
+		mux-int-port = <1>;
+		mux-ext-port = <6>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	dts1672: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_1P8 (1+R1/R2 = 2.505): Aud/eMMC/microSD/Touch */
+			reg_1p8v: sw1 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+				linux,phandle = <&reg_vdd_arm>;
+			};
+
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw4 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+				linux,phandle = <&reg_vdd_soc>;
+			};
+
+			/* VDD_1P0 (1+R1/R2 = 1.38): */
+			reg_1p0v: ldo2 {
+				regulator-name = "vdd1p0";
+				regulator-min-microvolt = <1002777>;
+				regulator-max-microvolt = <1002777>;
+				lltc,fb-voltage-divider = <100000 261000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	tlv320aic3105: codec@18 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x18>;
+		reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
+		/* Regulators */
+		DRVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_1p8v>;
+	};
+
+	accelerometer@1d {
+		compatible = "fsl,mma8451";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "INT2";
+	};
+
+	/* headphone detect */
+	ts3a227e@3b {
+		compatible = "ti,ts3a227e";
+		reg = <0x3b>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		ti,micbias = <4>; /* 2.5V micbias */
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: g101evn010 {
+				clock-frequency = <68930000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	max-frequency = <100000000>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x130b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x130b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x130b0
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* MCK */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x4001b0b0 /* PHY_EN */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			/* I2C3 */
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+
+			/* Headphone Detect */
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x0001b0b0 /* HPDET_IRQ# */
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x0001b0b0 /* HPDET_MIC# */
+
+			/* Codec */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x0001b0b0 /* CODEC_RST# */
+
+			/* Touch Controller */
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x0001b0b0 /* TOUCH_IRQ# */
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x0001b0b0 /* TOUCH_RST */
+
+			/* Stow Sensor */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x0001b0b0 /* ACCEL_IRQ2 */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x0001b0b0 /* ACCEL_IRQ1 */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b1 /* TXEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x4001b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x4001b0b0 /* EMMY_EN */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x4001b0b0 /* EMMY_CFG1# */
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05		0x4001b0b0 /* EMMY_CFG2# */
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x0001b0b0 /* EMMY_BTWAKE# */
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x0001b0b0 /* EMMY_WFWAKE# */
+
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x17059 /* CD */
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x170b9 /* CD */
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x170f9 /* CD */
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
new file mode 100644
index 0000000000000..9594bc5745ed6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
@@ -0,0 +1,820 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: led-user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan4";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan3";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan1";
+				};
+
+				port@5 {
+					reg = <5>;
+					ethernet = <&fec>;
+					phy-mode = "rgmii-id";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	dts1672: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	crypto@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts: touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B         0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B         0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA    0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA    0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B      0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B      0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
new file mode 100644
index 0000000000000..955a51226eda7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
@@ -0,0 +1,536 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
new file mode 100644
index 0000000000000..218d6e667ed24
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
@@ -0,0 +1,664 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: led-user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_wl: regulator-wl {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		compatible = "regulator-fixed";
+		regulator-name = "wl";
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <800000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <22100 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_3p0";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_soc";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_1p5";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p8";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_an1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accel@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 0>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+/* off-board RS232 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* serial console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* cc1352 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Sterling-LWB Bluetooth */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* GPS */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+/* Sterling-LWB SDIO WiFi */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_wl>;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_accel: accelmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
+		>;
+	};
+
+	pinctrl_bten: btengrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x4001b0b1 /* DIO20 */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x4001b0b1 /* DIO14 */
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x4001b0b1 /* DIO15 */
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1 /* TMS */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1 /* TCK */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1 /* TDO */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1 /* TDI */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x4001b0b1 /* RST# */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
new file mode 100644
index 0000000000000..de5983cf7810d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
@@ -0,0 +1,604 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: led-user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+
+		fan-controller@a {
+			compatible = "gw,gsc-fan";
+			reg = <0x0a>;
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accel@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 0>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_accel: accelmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: escpi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
new file mode 100644
index 0000000000000..82f47c295b085
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
@@ -0,0 +1,498 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <800000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <22100 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_arm";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_soc";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p5";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_1p0";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_3p0";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_an1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
new file mode 100644
index 0000000000000..bfade71490807
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
@@ -0,0 +1,368 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
+	};
+
+	v_3v2: regulator-v-3v2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_3v2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	v_sd: regulator-v-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_vmmc>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_sd";
+		startup-delay-us = <1000>;
+		vin-supply = <&v_3v2>;
+	};
+
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Headphone Jack",
+			"Headphone Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "On-board SPDIF";
+		/* IMX6 doesn't implement this yet */
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	mux-pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
+	status = "okay";
+
+	/* Pro baseboard model */
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	/* Pro baseboard model */
+	sgtl5000: codec@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		VDDA-supply = <&v_3v2>;
+		VDDIO-supply = <&v_3v2>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	hummingboard {
+		pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
+				MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
+			>;
+		};
+
+		pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard_hdmi: hummingboard-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
+		pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard_pwm1: pwm1grp {
+			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
+		};
+
+		pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+			>;
+		};
+
+		pinctrl_hummingboard_spdif: hummingboard-spdif {
+			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
+		};
+
+		pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
+			/*
+			 * We want it pulled down for a fixed host connection.
+			 */
+			fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>;
+		};
+
+		pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+			>;
+		};
+
+		pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+			>;
+		};
+		pinctrl_hummingboard_vmmc: hummingboard-vmmc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+			>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
+	reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	 pinctrl-names = "default";
+	 pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
+	 status = "okay";
+};
+
+&pwm2 {
+	 pinctrl-names = "default";
+	 status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&v_usb2>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_hummingboard_usdhc2_aux
+		&pinctrl_hummingboard_usdhc2
+	>;
+	vmmc-supply = <&v_sd>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_3v2>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2-emmc.dtsi
new file mode 100644
index 0000000000000..f400405381a72
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2-emmc.dtsi
@@ -0,0 +1,72 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&iomuxc {
+	hummingboard2 {
+		pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+			>;
+		};
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_usdhc3>;
+	vmmc-supply = <&v_3v2>;
+	vqmmc-supply = <&v_3v2>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi
new file mode 100644
index 0000000000000..0883ef99cded0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi
@@ -0,0 +1,577 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
+		linux,rc-map-name = "rc-rc6-mce";
+	};
+
+	v_3v2: regulator-v-3v2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_3v2";
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	vcc_1p8: regulator-vcc-1p8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vcc_1p8";
+		vin-supply = <&v_3v2>;
+	};
+
+	v_sd: regulator-v-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_sd";
+		startup-delay-us = <1000>;
+		vin-supply = <&v_3v2>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb2: regulator-v-usb2 {
+		/* USB hub port 1 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb3: regulator-v-usb3 {
+		/* USB hub port 3 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb3";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb4: regulator-v-usb4 {
+		/* USB hub port 4 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb4";
+		vin-supply = <&v_5v0>;
+	};
+
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	mux-pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c1>;
+	status = "okay";
+
+	pcf8523: rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: codec@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&v_3v2>;
+		VDDD-supply = <&vcc_1p8>;
+		VDDIO-supply = <&v_3v2>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hummingboard2 {
+		pinctrl_hog: hoggrp {
+		fsl,pins = <
+				/*
+				 * 36 pin headers GPIO description. The pins
+				 * numbering as following -
+				 *
+				 * 	3.2v	5v	74	75
+				 *	73	72	71	70
+				 *	69	68	67	66
+				 *
+				 *	77	78	79	76
+				 *	65	64	61	60
+				 *	53	52	51	50
+				 *	49	48	166	132
+				 *	95	94	90	91
+				 *	GND	54	24	204
+				 *
+				 * The GPIO numbers can be extracted using
+				 * signal name from below.
+				 * Example -
+				 * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is
+				 * GPIO(3,10) which is (3-1)*32+10 = gpio 74
+				 *
+				 * i.e. The mapping of GPIO(X,Y) to Linux gpio
+				 * number is : gpio number = (X-1) * 32 + Y
+				 */
+				/* DI1_PIN15 */
+				MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1
+				/* DI1_PIN02 */
+				MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1
+				/* DISP1_DATA00 */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1
+				/* DISP1_DATA01 */
+				MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1
+				/* DISP1_DATA02 */
+				MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1
+				/* DISP1_DATA03 */
+				MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1
+				/* DISP1_DATA04 */
+				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1
+				/* DISP1_DATA05 */
+				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1
+				/* DISP1_DATA06 */
+				MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1
+				/* DISP1_DATA07 */
+				MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1
+				/* DI1_D0_CS */
+				MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1
+				/* DI1_D1_CS */
+				MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1
+				/* DI1_PIN01 */
+				MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1
+				/* DI1_PIN03 */
+				MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1
+				/* DISP1_DATA08 */
+				MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1
+				/* DISP1_DATA09 */
+				MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1
+				/* DISP1_DATA10 */
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1
+				/* DISP1_DATA11 */
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1
+				/* DISP1_DATA12 */
+				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1
+				/* DISP1_DATA13 */
+				MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1
+				/* DISP1_DATA14 */
+				MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1
+				/* DISP1_DATA15 */
+				MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1
+				/* DISP1_DATA16 */
+				MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1
+				/* DISP1_DATA17 */
+				MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1
+				/* DISP1_DATA18 */
+				MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1
+				/* DISP1_DATA19 */
+				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1
+				/* DISP1_DATA20 */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1
+				/* DISP1_DATA21 */
+				MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1
+				/* DISP1_DATA22 */
+				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1
+				/* DISP1_DATA23 */
+				MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1
+				/* DI1_DISP_CLK */
+				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1
+				/* SPDIF_IN */
+				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1
+				/* SPDIF_OUT */
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1
+
+				/* MikroBUS GPIO pin number 10 */
+				MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1
+			>;
+		};
+
+		pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x000b1 /* CS */
+			>;
+		};
+
+		pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000
+			>;
+		};
+
+		pinctrl_hummingboard2_hdmi: hummingboard2-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
+		pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard2_mipi: hummingboard2_mipi {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1
+				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+			>;
+		};
+
+		pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard2_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard2_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+			>;
+		};
+
+		pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus {
+			fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus {
+			fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id {
+			/*
+			 * We want it pulled down for a fixed host connection.
+			 */
+			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+		};
+
+		pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
+			>;
+		};
+
+		pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+			>;
+		};
+
+		pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170b9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100b9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
+			>;
+		};
+
+		pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170f9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100f9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
+			>;
+		};
+
+		pinctrl_hummingboard2_vmmc: hummingboard2-vmmc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+			>;
+		};
+
+		pinctrl_hummingboard2_uart3: hummingboard2-uart3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D25__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D24__UART3_RX_DATA	0x40013000
+			>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>;
+	reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pwm3>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2
+	>;
+	pinctrl-1 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2_100mhz
+	>;
+	pinctrl-2 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2_200mhz
+	>;
+	vmmc-supply = <&v_sd>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_3v2>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-1.5.dtsi
new file mode 100644
index 0000000000000..0fd7f2e24d9ca
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-1.5.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org>
+ */
+
+#include "imx6qdl-icore.dtsi"
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi
new file mode 100644
index 0000000000000..d339957cc0973
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ * Copyright (C) 2015 Engicam S.r.l.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_sd3_vmmc: regulator-sd3-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "P3V3_SD3_SWITCHED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+	};
+
+	reg_sd4_vmmc: regulator-sd4-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "P3V3_SD4_SWITCHED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	usb_hub: usb-hub {
+		compatible = "smsc,usb3503a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhub>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>;
+		clock-names = "refclk";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-icore-rqs-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack",
+			"Speaker", "Line Out Jack",
+			"Speaker", "Ext Spk";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+		>;
+	};
+
+	mux-aud4 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			reg = <0x0>;
+			rxc-skew-ps = <1140>;
+			txc-skew-ps = <1140>;
+			txen-skew-ps = <600>;
+			rxdv-skew-ps = <240>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <600>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <240>;
+			txd0-skew-ps = <60>;
+			txd1-skew-ps = <60>;
+			txd2-skew-ps = <60>;
+			txd3-skew-ps = <240>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	clocks = <&clks IMX6QDL_CLK_USBOH3>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&reg_sd3_vmmc>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	vmmc-supply = <&reg_sd4_vmmc>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f059	/* PCIe Reset */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06  0x1f059	/* HUB USB Reset */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17070
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10070
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1f059	/* CD */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1f059	/* PWR */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170B1
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100B1
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B1
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B1
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B1
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B1
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170F9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100F9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17070
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10070
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4grp_100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170B1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100B1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170B1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170B1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170B1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170B1
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170B1
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170B1
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170B1
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170B1
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4grp_200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170F9
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100F9
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170F9
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170F9
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170F9
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170F9
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170F9
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170F9
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170F9
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170F9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi
new file mode 100644
index 0000000000000..efe11524b885d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 100000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	rmii_clk: clock-rmii-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;  /* 25MHz for example */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-icore-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack",
+			"Speaker", "Line Out Jack",
+			"Speaker", "Ext Spk";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+
+	mux-ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+		>;
+	};
+
+	mux-aud4 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
+	phy-mode = "rmii";
+	phy-handle = <&eth_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <4000>;
+			reset-deassert-us = <4000>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_1p8v>;
+		AVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_3p3v>;
+		powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+};
+
+&mipi_csi {
+	status = "disabled";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	  0x130b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10070
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi
new file mode 100644
index 0000000000000..85aeebc9485dd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi
@@ -0,0 +1,821 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2017 (C) Priit Laes <plaes@plaes.org>
+ * Copyright 2018 (C) Pengutronix, Michael Grzeschik <mgr@pengutronix.de>
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ *
+ * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	reg_1p0v_s0: regulator-1p0v-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V0_S0";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_smarc_suppy>;
+	};
+
+	reg_1p35v_vcoredig_s5: regulator-1p35v-vcoredig-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V35_VCOREDIG_S5";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_3p3v_s5>;
+	};
+
+	reg_1p8v_s5: regulator-1p8v-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8_S5";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_3p3v_s5>;
+	};
+
+	reg_3p3v_s0: regulator-3p3v-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_S0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_3p3v_s5>;
+	};
+
+	reg_3p3v_s5: regulator-3p3v-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_S5";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_smarc_suppy>;
+	};
+
+	reg_smarc_lcdbklt: regulator-smarc-lcdbklt {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcdbklt_en>;
+		regulator-name = "LCD_BKLT_EN";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_smarc_lcdvdd: regulator-smarc-lcdvdd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcdvdd_en>;
+		regulator-name = "LCD_VDD_EN";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_smarc_rtc: regulator-smarc-rtc {
+		compatible = "regulator-fixed";
+		regulator-name = "V_IN_RTC_BATT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* Module supply range can be 3.00V ... 5.25V */
+	reg_smarc_suppy: regulator-smarc-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "V_IN_WIDE";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lcd: lcd {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_in: endpoint {
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_out: endpoint {
+			};
+		};
+	};
+
+	lcd_backlight: lcd-backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000 0>;
+		pwm-names = "LCD_BKLT_PWM";
+
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <4>;
+
+		power-supply = <&reg_smarc_lcdbklt>;
+		status = "disabled";
+	};
+
+	i2c_intern: i2c-gpio-intern {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio_intern>;
+		sda-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>; /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c_lcd: i2c-gpio-lcd {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio_lcd>;
+		sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>; /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c_cam: i2c-gpio-cam {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio_cam>;
+		sda-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>; /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
+
+/* I2S0, I2S1 */
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+
+	audmux_ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT3) |
+			 IMX_AUDMUX_V2_PTCR_SYN    |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT3)
+		>;
+	};
+
+	audmux_adu3 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT3>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+
+	audmux_ssi2 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+			 IMX_AUDMUX_V2_PTCR_SYN    |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+		>;
+	};
+
+	audmux_adu4 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT2_SSI1)
+		>;
+	};
+};
+
+/* CAN0 */
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* CAN1 */
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+/* SPI1 */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
+		   <&gpio2 27 GPIO_ACTIVE_LOW>;
+};
+
+/* SPI0 */
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
+		   <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* default boot source: workaround #1 for errata ERR006282 */
+	smarc_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+/* GBE */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+};
+
+&i2c_intern {
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			reg_v_core_s0: sw1ab {
+				regulator-name = "V_CORE_S0";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vddsoc_s0: sw1c {
+				regulator-name = "V_VDDSOC_S0";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_3p15v_s0: sw2 {
+				regulator-name = "V_3V15_S0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* sw3a/b is used in dual mode, but driver does not
+			 * support it. Although, there's no need to control
+			 * DDR power - so just leaving dummy entries for sw3a
+			 * and sw3b for now.
+			 */
+			sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_1p8v_s0: sw4 {
+				regulator-name = "V_1V8_S0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* Regulator for USB */
+			reg_5p0v_s0: swbst {
+				regulator-name = "V_5V0_S0";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+			};
+
+			reg_vsnvs: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vrefddr: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/*
+			 * Per schematics, of all VGEN's, only VGEN5 has some
+			 * usage ... but even that - over DNI resistor
+			 */
+			vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_2p5v_s0: vgen5 {
+				regulator-name = "V_2V5_S0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+/* I2C_GP */
+&i2c1 {
+	clock-frequency = <375000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+};
+
+/* HDMI_CTRL */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+/* I2C_PM */
+&i2c3 {
+	clock-frequency = <375000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	smarc_eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mgmt_gpios &pinctrl_gpio>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+
+			/* AUDIO MCLK */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2		0x000b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
+
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26  0x1b0b0 /* CS0 */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 /* CS1 */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+
+			/* SPI_IMX_CS2# - connected to internal flash */
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
+			/* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00	0x1b0b0	/* GPIO0 / CAM0_PWR# */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01	0x1b0b0 /* GPIO1 / CAM1_PWR# */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02	0x1b0b0 /* GPIO2 / CAM0_RST# */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03	0x1b0b0 /* GPIO3 / CAM1_RST# */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x1b0b0 /* GPIO4 / HDA_RST#  */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05	0x1b0b0 /* GPIO5 / PWM_OUT   */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06	0x1b0b0 /* GPIO6 / TACHIN    */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07	0x1b0b0 /* GPIO7 / PCAM_FLD  */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x1b0b0 /* GPIO8 / CAN0_ERR# */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09	0x1b0b0 /* GPIO9 / CAN1_ERR# */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10	0x1b0b0 /* GPIO10            */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11	0x1b0b0 /* GPIO11            */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b0b0 /* RST_GBE0_PHY# */
+		>;
+	};
+
+	pinctrl_i2c_gpio_cam: i2c-gpiocamgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0 /* SCL */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0 /* SDA */
+		>;
+	};
+
+	pinctrl_i2c_gpio_intern: i2c-gpiointerngrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30  0x1b0b0 /* SCL */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* SDA */
+		>;
+	};
+
+	pinctrl_i2c_gpio_lcd: i2c-gpiolcdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 /* SCL */
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 /* SDA */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00  0x100f1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01  0x100f1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02  0x100f1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03  0x100f1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04  0x100f1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05  0x100f1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06  0x100f1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07  0x100f1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08  0x100f1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09  0x100f1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f1
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f1
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f1
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f1
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f1
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f1
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f1
+
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f1
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x100f1 /* DE */
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x100f1 /* HSYNC */
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x100f1 /* VSYNC */
+		>;
+	};
+
+	pinctrl_lcdbklt_en: lcdbkltengrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16	0x1b0b1
+		>;
+	};
+
+	pinctrl_lcdvdd_en: lcdvddengrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+		>;
+	};
+
+	pinctrl_mipi_csi: mipi-csigrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1	0x000b0	/* CSI0/1 MCLK */
+		>;
+	};
+
+	pinctrl_mgmt_gpios: mgmt-gpiosgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0	/* LID#           */
+			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17		0x1b0b0	/* SLEEP#         */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0	/* CHARGING#      */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0	/* CHARGER_PRSNT# */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x1b0b0	/* CARRIER_STBY#  */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0	/* BATLOW#        */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b0	/* TEST#          */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0	/* VDD_IO_SEL_D#  */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0 /* POWER_BTN#     */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18	0x1b0b0 /* PCI_A_PRSNT# */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 /* RST_PCIE_A#  */
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* PCIE_WAKE#   */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1f8b0
+			/* power, oc muxed but not used by the driver */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0 /* USB power */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0 /* USB OC */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__SD3_CLK 0x17059
+			MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
+			MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+		>;
+	};
+
+	pinctrl_wdog1: wdog1rp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B	0x1b0b0
+		>;
+	};
+};
+
+&mipi_csi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mipi_csi>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+};
+
+/* LCD_BKLT_PWM */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_arm {
+	vin-supply = <&reg_v_core_s0>;
+};
+
+&reg_pu {
+	vin-supply = <&reg_vddsoc_s0>;
+};
+
+&reg_soc {
+	vin-supply = <&reg_vddsoc_s0>;
+};
+
+/* SER0 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+};
+
+/* SER1 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+/* SER2 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+};
+
+/* SER3 */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+};
+
+/* USB0 */
+&usbotg {
+	/*
+	 * no 'imx6-usb-charger-detection'
+	 * since USB_OTG_CHD_B pin is not wired
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+};
+
+/* USB1/2 via hub */
+&usbh1 {
+	vbus-supply = <&reg_5p0v_s0>;
+};
+
+/* SDIO */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+};
+
+/* SDMMC */
+&usdhc4 {
+	/* Internal eMMC, optional on some boards */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	vmmc-supply = <&reg_3p3v_s0>;
+	vqmmc-supply = <&reg_1p8v_s0>;
+};
+
+&wdog1 {
+	/* CPLD is feeded by watchdog (hardwired) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
new file mode 100644
index 0000000000000..7d032d1f3b471
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+		rtc0 = &rtc0;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	beeper: gpio-beeper {
+		compatible = "gpio-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobeeper>;
+		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_buttons: gpio-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+		button1 {
+			label = "s6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button2 {
+			label = "s7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button3 {
+			label = "s8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_mba6_3p3v: regulator-mba6-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6-3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpcie>;
+		regulator-name = "supply-pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* PCIE.PWR_EN */
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_mba6_3p3v>;
+	};
+
+	reg_vcc3v3_audio: regulator-vcc3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3-audio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_mba6_3p3v>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audmux>;
+		model = "imx-audio-tlv320aic32x4";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&tlv320aic32x4>;
+		audio-asrc = <&asrc>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	mux-ssi0 {
+		fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+				IMX_AUDMUX_V2_PTCR_TFSDIR |
+				IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT3_SSI_PINS_3) |
+				IMX_AUDMUX_V2_PTCR_TCLKDIR |
+				IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT3_SSI_PINS_3))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT3_SSI_PINS_3)
+		>;
+	};
+
+	mux-aud3 {
+		fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_mba6>;
+	cs-gpios = <&gpio3 19 0>, <&gpio3 24 0>;
+};
+
+&fec {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <100000>;
+			micrel,force-master;
+			max-speed = <1000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "mclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		ldoin-supply = <&reg_vcc3v3_audio>;
+		iov-supply = <&reg_mba6_3p3v>;
+	};
+};
+
+/* DDC */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_recovery>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet@1 {
+			compatible = "usb424,9e00";
+			reg = <1>;
+			nvmem-cells = <&mba_mac_address>;
+			nvmem-cell-names = "mac-address";
+		};
+	};
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	power-active-high;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+/* SD card slot */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_mba6_3p3v>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	/* does not work on unmodified starter kit */
+	/* fsl,ext-reset-output; */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0xb099
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0xb099
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0xb099
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0xb099
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0xb0 /* CLK */
+		>;
+	};
+
+	pinctrl_ecspi1_mba6: ecspimba6grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0xb099 /* eCSPI1 SS2 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* FEC phy IRQ */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x00011008
+			/* FEC phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25   0x1b099
+			/* DSE = 100, 100k up, SPEED = MED */
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0xb0a0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0xb0a0
+			/* DSE = 111, pull 100k up */
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0xb038
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0xb038
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0xb038
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0xb038
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0xb038
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
+			/* DSE = 111, pull external */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x0038
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x0038
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x0038
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x0038
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x0038
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
+			/* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0f0
+		>;
+	};
+
+	pinctrl_gpiobeeper: gpiobeepergrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0xb099
+		>;
+	};
+
+	pinctrl_gpiobuttons: gpiobuttongrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b099
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b099
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b099
+		>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0xb099 /* LED V15 */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb099 /* LED V16 */
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		/* NOTE: DDC is done via I2C2, so DON'T
+		 * configure DDC pins for HDMI!
+		 */
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
+
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
+
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
+
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
+
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
+
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
+
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899
+		>;
+	};
+
+	pinctrl_i2c2_recovery: i2c2recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b899
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b899
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_regpcie: regpciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D30__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			/* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00017071
+			/* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
+
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x0001b099 /* usdhc2 CD */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02  0x0001b099 /* usdhc2 WP */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC  0x0001b0b0
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID   0x00017059
+			MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0001b099
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			 /* Watchdog out */
+			MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x0000b099
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi
new file mode 100644
index 0000000000000..27fec340c380a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
+};
+
+&i2c1 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	m24c64_57: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mba_mac_address: mac-address@20 {
+			reg = <0x20 0x6>;
+		};
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi
new file mode 100644
index 0000000000000..0a9f076eeb36e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	m24c64_57: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mba_mac_address: mac-address@20 {
+			reg = <0x20 0x6>;
+		};
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
new file mode 100644
index 0000000000000..6d4eab1942b94
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
@@ -0,0 +1,583 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_wlan_vmmc: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <102>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <158>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-j14-pin1 {
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j14-pin3 {
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j14-pins8-9 {
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j46-pin2 {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j46-pin3 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+	};
+
+	backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6dl-nit6xlite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+
+	rtc@6f {
+		compatible = "isil,isl1208";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x6f>;
+		interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_j10>;
+	pinctrl-1 = <&pinctrl_j28>;
+
+	imx6dl-nit6xlite {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio-keysgrp {
+			fsl,pins = <
+				/* Home Button: J14 pin 5 */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Back Button: J14 pin 7 */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+				/* Touch IRQ: J7 pin 4 */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+				/* tcs2004 IRQ */
+				MX6QDL_PAD_EIM_LBA__GPIO2_IO27	0x1b0b0
+				/* tsc2004 reset */
+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x0b0b0
+			>;
+		};
+
+		pinctrl_j10: j10grp {
+			fsl,pins = <
+				/* Broadcom WiFi module pins */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0b0b0
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
+
+		pinctrl_j28: j28grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			>;
+		};
+
+		pinctrl_leds: ledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x0b0b0
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x030b0
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x0b0b0
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
+			>;
+		};
+
+		pinctrl_rtc: rtcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b0
+			>;
+		};
+
+		pinctrl_sgtl5000: sgtl5000grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
new file mode 100644
index 0000000000000..81a9a302aec1b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xF0000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p8v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_2p5v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_h1_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_wlan_vmmc: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+
+		reg_can_xcvr: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	i2c2mux {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
+			     &gpio4 15 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+		idle-state = <0>;
+
+		i2c2mux@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c3mux {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c3mux@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-speaker-enable {
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-ttymxc4-rs232 {
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "on";
+		};
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel-lvds1 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds1>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6_max-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	imx6q-nitrogen6-max {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio-keysgrp {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				/* Menu Button */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				/* Home Button */
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				/* Back Button */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* Volume Up Button */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Volume Down Button */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2mux: i2c2muxgrp {
+			fsl,pins = <
+				/* ov5642 camera i2c enable */
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x000b0
+				/* ov5640_mipi camera i2c enable */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15	0x000b0
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c3mux: i2c3muxgrp {
+			fsl,pins = <
+				/* PCIe I2C enable */
+				MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
+			>;
+		};
+
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				/* PCIe reset */
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x000b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_rv4162: rv4162grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
+			>;
+		};
+
+		pinctrl_sgtl5000: sgtl5000grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x130b1
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x030b1
+				/* RS485 RX Enable: pull up */
+				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b1
+				/* RS485 DEN: pull down */
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b1
+				/* RS485/!RS232 Select: pull down (rs232) */
+				MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x030b1
+				/* ON: pull down */
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x030b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x100b0
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
new file mode 100644
index 0000000000000..000e9dc97b1ac
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
@@ -0,0 +1,736 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_lvds1>;
+		gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel-lvds1 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds1>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan_vmmc: regulator-wlan-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_vmmc>;
+		regulator-name = "reg_wlan_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6_som2-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio6 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight_lvds1: backlight-lvds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x0b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_can_xcvr: can-xcvrgrp {
+		fsl,pins = <
+			/* Flexcan XCVR enable */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x130b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x030b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			/* Power Button */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			/* Menu Button */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			/* Home Button */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+			/* Back Button */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+			/* Volume Up Button */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+			/* Volume Down Button */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3mux: i2c3muxgrp {
+		fsl,pins = <
+			/* PCIe I2C enable */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
+		>;
+	};
+
+	pinctrl_j15: j15grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* PCIe reset */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00	0x030b0
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x030b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_rv4162: rv4162grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x130b0
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x130b0
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x030b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17071
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17071
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17071
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17071
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17071
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_wlan_vmmc: wlan-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x100b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x030b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x030b0
+			MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
new file mode 100644
index 0000000000000..731759bdd7f57
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
@@ -0,0 +1,693 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+
+		reg_can_xcvr: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_wlan_vmmc: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+
+		reg_usb_h1_vbus: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6x-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x2000>;
+		};
+
+		partition@c2000 {
+			label = "splash";
+			reg = <0xc2000 0x13e000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-nitrogen6x {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio-keysgrp {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				/* Menu Button */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				/* Home Button */
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				/* Back Button */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* Volume Up Button */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Volume Down Button */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
+			>;
+		};
+
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-av-02.dtsi
new file mode 100644
index 0000000000000..0020dbb1722c3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-av-02.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/ {
+	display: display0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0>;
+		interface-pix-fmt = "rgb24";
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&peb_panel_lcd_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "edt,etm0700g0edh6";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_pwr>;
+		power-supply = <&reg_display>;
+		enable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			peb_panel_lcd_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+
+	reg_display: regulator-peb-display {
+		compatible = "regulator-fixed";
+		regulator-name = "peb-display";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&i2c1 {
+	edt_ft5x06: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		reg = <0x38>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		status = "disabled";
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_disp0: disp0grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x1b080
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_disp0_pwr: disp0pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_edt_ft5x06: edtft5x06grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02			0xb0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
new file mode 100644
index 0000000000000..037b60197598b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+
+		sleep {
+			label = "Sleep Button";
+			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+		status = "disabled";
+
+		user-led1 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+
+		user-led2 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+
+		user-led3 {
+			gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_user_leds: userledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-wlbt-05.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
new file mode 100644
index 0000000000000..84f884d6e55bc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_wl_en: regulator-wl-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wl>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		status = "disabled";
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_bt>;
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_wl>;
+	vmmc-supply = <&reg_wl_en>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	status = "disabled";
+
+	brmcf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart3_bt: uart3grp-bt {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0xb0b1	/* BT ENABLE */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0xb0b1	/* DEV WAKEUP */
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0xb0b1  /* HOST WAKEUP */
+		>;
+	};
+
+	pinctrl_usdhc3_wl: usdhc3grp-wl {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_wl: wlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02      0xb0b1	/* WLAN ENABLE */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
new file mode 100644
index 0000000000000..1ca4d219609f6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+
+/ {
+	aliases {
+		rtc0 = &i2c_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_backlight>;
+		pwms = <&pwm1 0 5000000>;
+		status = "okay";
+	};
+
+	gpio_leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds>;
+		status = "disabled";
+
+		led-red {
+			label = "phyboard-mira:red";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "phyboard-mira:green";
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "phyboard-mira:blue";
+			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_en_switch: regulator-en-switch {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_en_switch>;
+		regulator-name = "Enable Switch";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	reg_flexcan1: regulator-flexcan1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_en>;
+		regulator-name = "flexcan1-reg";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_panel: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "mPCIe_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg_vbus: usbotg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	panel {
+		compatible = "auo,g104sn02";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_en>;
+		power-supply = <&reg_panel>;
+		enable-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_flexcan1>;
+	status = "disabled";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmicec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <400000>;
+	status = "disabled";
+
+	stmpe: touchctrl@44 {
+		compatible = "st,stmpe811";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe>;
+		reg = <0x44>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 IRQ_TYPE_NONE>;
+		status = "disabled";
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	i2c_rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		reg = <0x68>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "disabled";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "disabled";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "disabled";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usbotg_vbus>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_panel_en: panelen1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
+		>;
+	};
+
+	pinctrl_en_switch: enswitchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1_en: flexcan1engrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0xb0b1
+		>;
+	};
+
+	pinctrl_gpioleds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24	0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmicec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0xb0b1
+		>;
+	};
+
+	pinctrl_pcie_reg: pciereggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0xb0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0xb0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0xb0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1  /* CD */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pbab01.dtsi
new file mode 100644
index 0000000000000..a41e47c06ef40
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pbab01.dtsi
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	regulators {
+		sound_1v8: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "i2s-audio-1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		sound_3v3: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "i2s-audio-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
+	tlv320_mclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+		clock-output-names = "tlv320-mclk";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "OnboardTLV320AIC3007";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"Headphone Jack", "HPLOUT",
+			"Headphone Jack", "HPROUT",
+			"MIC3L", "Mic Jack",
+			"MIC3R", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&tlv320_mclk>;
+		};
+	};
+
+};
+
+&audmux {
+	status = "okay";
+
+	mux-ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	mux-pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	codec: tlv320@18 {
+		compatible = "ti,tlv320aic3007";
+		#sound-dai-cells = <0>;
+		reg = <0x18>;
+		ai3x-micbias-vg = <2>;
+
+		AVDD-supply = <&sound_3v3>;
+		IOVDD-supply = <&sound_3v3>;
+		DRVDD-supply = <&sound_3v3>;
+		DVDD-supply = <&sound_1v8>;
+	};
+
+	stmpe@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+	};
+
+	rtc@51 {
+		compatible = "epson,rtc8564";
+		reg = <0x51>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usdhc2 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
new file mode 100644
index 0000000000000..80adb2a02cc94
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 Quad";
+	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 15 0>;
+			enable-active-high;
+		};
+
+		reg_usb_h1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1_vbus>;
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 0 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio_leds: leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+		compatible = "gpio-leds";
+
+		led_green: led-green {
+			label = "phyflex:green";
+			gpios = <&gpio1 30 0>;
+		};
+
+		led_red: led-red {
+			label = "phyflex:red";
+			gpios = <&gpio2 31 0>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+
+	som_flash: flash@0 {
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii";
+	phy-reset-duration = <10>; /* in msecs */
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vdd_eth_io_reg>;
+	status = "disabled";
+
+	fec_mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			txc-skew-ps = <1680>;
+			rxc-skew-ps = <1860>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	som_eeprom: eeprom@50 {
+		compatible = "catalyst,24c32", "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	pmic@58 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+		interrupt-controller;
+
+		regulators {
+			vddcore_reg: bcore1 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vddsoc_reg: bcore2 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_reg: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_buckmem_reg: bmem {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_reg: bio {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io_reg: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_mx6_snvs_reg: ldo5 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_pmic_io_reg: ldo6 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_sd0_reg: ldo9 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_sd1_reg: ldo10 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_mx6_high_reg: ldo11 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+
+		da9063_rtc: rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		da9063_wdog: watchdog {
+			compatible = "dlg,da9063-watchdog";
+		};
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			status = "disabled";
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+};
+
+&iomuxc {
+	imx6q-phytec-pfla02 {
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x80000000 /* CS0 */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x80000000 /* Reset GPIO */
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_leds: ledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000 /* Green LED */
+				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x80000000 /* Red LED */
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
+		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09	0x80000000>; /* PMIC interrupt */
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1_vbus: usbh1vbusgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_cdwp: usdhc3cdwp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT16__AUD5_TXC	0x130b0
+				MX6QDL_PAD_DISP0_DAT17__AUD5_TXD	0x110b0
+				MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS	0x130b0
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+			>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&reg_arm {
+	vin-supply = <&vddcore_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "disabled";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd1_reg>;
+	status = "disabled";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
+		     &pinctrl_usdhc3_cdwp>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd0_reg>;
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
new file mode 100644
index 0000000000000..28a805384668f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/dlg,da9063-regulator.h>
+
+/ {
+	aliases {
+		rtc1 = &da9062_rtc;
+		rtc2 = &snvs_rtc;
+	};
+
+	/*
+	 * Set the minimum memory size here and
+	 * let the bootloader set the real size.
+	 */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x8000000>;
+	};
+
+	gpio_leds_som: somleds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds_som>;
+
+		som-led-green {
+			label = "phycore:green";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	m25p80: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		status = "disabled";
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii";
+	phy-supply = <&vdd_eth_io>;
+	phy-reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			reg = <3>;
+			txc-skew-ps = <1680>;
+			rxc-skew-ps = <1860>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "st,24c32", "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	pmic: pmic@58 {
+		compatible = "dlg,da9062";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		da9062_rtc: rtc {
+			compatible = "dlg,da9062-rtc";
+		};
+
+		da9062_onkey: onkey {
+			compatible = "dlg,da9062-onkey";
+		};
+
+		watchdog {
+			compatible = "dlg,da9062-watchdog";
+			dlg,use-sw-pm;
+		};
+
+		thermal {
+			compatible = "dlg,da9062-thermal";
+			status = "disabled";
+		};
+
+		gpio {
+			compatible = "dlg,da9062-gpio";
+			status = "disabled";
+		};
+
+		regulators {
+			vdd_arm: buck1 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_soc: buck2 {
+				regulator-name = "vdd_soc";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_1p5: buck3 {
+				regulator-name = "vdd_ddr3";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_eth_1p2: buck4 {
+				regulator-name = "vdd_eth";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_snvs: ldo1 {
+				regulator-name = "vdd_snvs";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_high: ldo2 {
+				regulator-name = "vdd_high";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io: ldo3 {
+				regulator-name = "vdd_eth_io";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			vdd_emmc_1p8: ldo4 {
+				regulator-name = "vdd_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&reg_arm {
+	vin-supply = <&vdd_arm>;
+};
+
+&reg_pu {
+	vin-supply = <&vdd_soc>;
+};
+
+&reg_soc {
+	vin-supply = <&vdd_soc>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS2__NAND_CE2_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS3__NAND_CE3_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x4001b8b1
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x4001b8b1
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-dwarf.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-dwarf.dtsi
new file mode 100644
index 0000000000000..3a968782e854b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-dwarf.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c1 {
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	io-expander@25 {
+		compatible = "nxp,pca9554";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-hobbit.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-hobbit.dtsi
new file mode 100644
index 0000000000000..144c4727fbc78
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-hobbit.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+
+	adc081c: adc@50 {
+		compatible = "ti,adc081c";
+		reg = <0x50>;
+		vref-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-nymph.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-nymph.dtsi
new file mode 100644
index 0000000000000..3d56a42164482
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-nymph.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c1 {
+	adc@52 {
+		compatible = "ti,adc081c";
+		reg = <0x52>;
+		vref-supply = <&reg_2p5v>;
+	};
+};
+
+&i2c2 {
+	io-expander@25 {
+		compatible = "nxp,pca9554";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+};
+
+&i2c3 {
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-pi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-pi.dtsi
new file mode 100644
index 0000000000000..b823dce62e63f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-pi.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&hdmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
new file mode 100644
index 0000000000000..c39a9ebdaba1c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+
+	codec_osc: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6-pico-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 50000 0>;
+		brightness-levels = <0 36 72 108 144 180 216 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "vxt,vl050-8048nt-c01";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&codec_osc>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_1p8v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		wakeup-source;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5645";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5645>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-frequency = <24000000>;
+		vdddo-supply = <&reg_1p8v>;
+		vdda-supply = <&reg_2p8v>;
+		vddd-supply = <&reg_1p5v>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5645_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5645_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_reset>;
+	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {  /* Bluetooth module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {  /* Wifi/BT  */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x4001b0b5 /* PICO_P24 */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x4001b0b5 /* PICO_P26 */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x4001b0b5 /* PICO_P28 */
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x4001b0b5 /* PICO_P30 */
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x4001b0b5 /* PICO_P32 */
+			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x4001b0b5 /* PICO_P34 */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x4001b0b5 /* PICO_P42 */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x4001b0b5 /* PICO_P44 */
+			MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x4001b0b5 /* PICO_P48 */
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000f0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x1b0b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x1b0b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x1b0b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000f0b0
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x000f0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1f0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_ov5645: ov5645grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x0b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
+			MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
+		>;
+	};
+
+	pinctrl_pcie_reset: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x130b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_lcd: reglcdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x17071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17071
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-prti6q.dtsi
new file mode 100644
index 0000000000000..36f84f4da6b0d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-prti6q.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_h1_vbus: regulator-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b008
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b008
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC	0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
new file mode 100644
index 0000000000000..f804ff95a6ad6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usbh1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			pinctrl-names = "default";
+			regulator-name = "usbh1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-names = "default";
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led0: led-usr {
+			label = "usr";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6-rex-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-rex-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca9535: gpio-expander@27 {
+		compatible = "nxp,pca9535";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9535>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-rex {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x030b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				/* CS */
+				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x000b1
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+				/* CS */
+				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+				/* Phy reset */
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				/* user led */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000
+			>;
+		};
+
+		pinctrl_pca9535: pca9535grp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x17059
+		   >;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x10b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x10b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				/* CD */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* WP */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1f0b0
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				/* CD */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+				/* WP */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1f0b0
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
new file mode 100644
index 0000000000000..68e97180d33e3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -0,0 +1,864 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-user {
+			label = "debug";
+			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		program {
+			label = "Program";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROGRAM>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	clocks {
+		codec_osc: anaclk2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "cs42888_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_en>;
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			"fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif",
+			   "fsl,imx-sabreauto-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		mux-gpios = <&gpio5 4 0>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adv7180: camera@21 {
+				compatible = "adi,adv7180";
+				reg = <0x21>;
+				powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+				port {
+					adv7180_to_ipu1_csi0_mux: endpoint {
+						remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+						bus-width = <8>;
+					};
+				};
+			};
+
+			max7310_a: gpio@30 {
+				compatible = "maxim,max7310";
+				reg = <0x30>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			max7310_b: gpio@32 {
+				compatible = "maxim,max7310";
+				reg = <0x32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_max7310>;
+				reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			};
+
+			max7310_c: gpio@34 {
+				compatible = "maxim,max7310";
+				reg = <0x34>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			light-sensor@44 {
+				compatible = "isil,isl29023";
+				reg = <0x44>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+			};
+
+			magnetometer@e {
+				compatible = "fsl,mag3110";
+				reg = <0x0e>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			accelerometer@1c {
+				compatible = "fsl,mma8451";
+				reg = <0x1c>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mma8451_int>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+			  <&clks IMX6QDL_PLL4_BYPASS>,
+			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
+				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	status = "disabled"; /* pin conflict with WEIM NOR */
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
+			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "disabled"; /* pin conflict with fec */
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: cs42888@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&codec_osc>;
+		clock-names = "mclk";
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+	};
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_egalax_int>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-sabreauto {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
+				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			>;
+		};
+
+		pinctrl_ecspi1_cs: ecspi1cs {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+			>;
+		};
+
+		pinctrl_egalax_int: egalax-intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_esai: esaigrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x17059
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x17059
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x17059
+				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x17059
+			>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
+				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b0
+				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3mux: i2c3muxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x1b0b0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x1b0b0
+			>;
+		};
+
+		pinctrl_max7310: max7310grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
+			>;
+		};
+
+		pinctrl_mma8451_int: mma8451intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_gpt_input_capture0: gptinputcapture0grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpt_input_capture1: gptinputcapture1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2	0x1b0b0
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_weim_cs0: weimcs0grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+			>;
+		};
+
+		pinctrl_weim_nor: weimnorgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
+				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	status = "disabled"; /* pin conflict with SPI NOR */
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x02000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+				0x0000c000 0x1404a38e 0x00000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
new file mode 100644
index 0000000000000..12573e1f917cb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
@@ -0,0 +1,748 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+
+		reg_can_xcvr: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_1p5v: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "1P5V";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+		};
+
+		reg_1p8v: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_2p8v: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "2P8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	mipi_xclk: mipi_xclk {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <22000000>;
+		clock-output-names = "mipi_pwm3";
+		pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ov5640: camera@40 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x40>;
+		clocks = <&mipi_xclk>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_1p8v>;
+		AVDD-supply = <&reg_2p8v>;
+		DVDD-supply = <&reg_1p5v>;
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */
+		powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	ov5642: camera@42 {
+		compatible = "ovti,ov5642";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-names = "xclk";
+		reg = <0x42>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			ov5642_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-sabrelite {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				/* Phy reset */
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio-keysgrp {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				/* Menu Button */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				/* Home Button */
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				/* Back Button */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* Volume Up Button */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Volume Down Button */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+				MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0
+			>;
+		};
+
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_ov5640: ov5640grp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D5__GPIO2_IO05   0x000b0
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0
+			>;
+		};
+
+		pinctrl_ov5642: ov5642grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x130b0
+				MX6QDL_PAD_GPIO_3__CCM_CLKO2    0x000b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0	/* WP */
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
new file mode 100644
index 0000000000000..4fe58764b929a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
@@ -0,0 +1,851 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply";
+		gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sensors: regulator-sensors {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sensors_reg>;
+		regulator-name = "sensors-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabresd-wm8962",
+			   "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-asrc = <&asrc>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC",
+			"DMIC", "MICBIAS",
+			"DMICDAT", "DMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+		hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>;
+		mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-red {
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
+		};
+	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0013 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x8014 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	accelerometer@1c {
+		compatible = "fsl,mma8451";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&reg_sensors>;
+		vddio-supply = <&reg_sensors>;
+	};
+
+	ov5642: camera@3c {
+		compatible = "ovti,ov5642";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		reg = <0x3c>;
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5642_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
+	};
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	};
+
+	magnetometer@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&reg_sensors>;
+		vddio-supply = <&reg_sensors>;
+	};
+
+	light-sensor@44 {
+		compatible = "isil,isl29023";
+		reg = <0x44>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&reg_sensors>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-sabresd {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
+			>;
+		};
+
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_hp: hpgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_RST__GPIO7_IO08          0x1b0b0
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0xb0b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
+			>;
+		};
+
+		pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__GPIO3_IO16		0xb0b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			>;
+		};
+
+		pinctrl_ov5640: ov5640grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
+				MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
+			>;
+		};
+
+		pinctrl_ov5642: ov5642grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+			>;
+		};
+
+		pinctrl_pcie_reg: pciereggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_sensors_reg: sensorsreggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
+			>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&reg_arm {
+       vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+       vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+       vin-supply = <&sw1c_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
new file mode 100644
index 0000000000000..02e6d36e85fa8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	panel {
+		compatible = "avic,tm097tdh02", "hannstar,hsd100pxn1";
+		backlight = <&panel_bl>;
+		power-supply = <&reg_3p3v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel_bl: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <4>;
+		power-supply = <&reg_3p3v>;
+		pwms = <&pwm1 0 10000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		reg = <0>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+/* SD card */
+&usdhc3 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc4 {
+	bus-width = <8>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_emmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_emmc: emmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* PHY reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_sd: sdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			/* CD pin */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
new file mode 100644
index 0000000000000..b81799d7076aa
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/ {
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <65000>;
+		touchscreen-inverted-y;
+		touchscreen-swapped-x-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touch>;
+		pinctrl-names ="default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI			0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO			0x000b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK			0x000b1
+			/* *no* external pull up */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x40000058
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* external pull up */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x10040
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
new file mode 100644
index 0000000000000..2731faede1cb4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		can0 = &can1;
+		can1 = &can2;
+		mdio-gpio0 = &mdio;
+		nand = &gpmi;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, /* 24V */
+		              <&adc 1>; /* temperature */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "D1";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "D2";
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "D3";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mdio: mdio {
+		compatible = "microchip,mdio-smi0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>,
+			<&gpio1 22 GPIO_ACTIVE_HIGH>;
+
+		switch@0 {
+			compatible = "microchip,ksz8873";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+			interrupt-parent = <&gpio3>;
+			interrupt = <30 IRQ_TYPE_LEVEL_HIGH>;
+			reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			reg = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports@0 {
+					reg = <0>;
+					phy-mode = "internal";
+					label = "lan1";
+				};
+
+				ports@1 {
+					reg = <1>;
+					phy-mode = "internal";
+					label = "lan2";
+				};
+
+				ports@2 {
+					reg = <2>;
+					label = "cpu";
+					ethernet = <&fec>;
+					phy-mode = "rmii";
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v0>;
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_24v0: regulator-24v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "24v0";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can1_stby>;
+		regulator-name = "can1-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can2_stby>;
+		regulator-name = "can2-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_tft_vcom: regulator-tft-vcom {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 20000 0>;
+		regulator-name = "tft_vcom";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-always-on;
+		voltage-table = <3600000 26>;
+	};
+
+	reg_vcc_mmc: regulator-vcc-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc>;
+		vin-supply = <&reg_3v3>;
+		regulator-name = "mmc_vcc_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+	};
+
+	reg_vcc_mmc_io: regulator-vcc-mmc-io {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc_io>;
+		vin-supply = <&reg_5v0>;
+		regulator-name = "mmc_io_supply";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		states = <1800000 0x1>, <3300000 0x0>;
+		startup-delay-us = <100>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <54000000>;
+		reg = <0>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc: adc@0 {
+		compatible = "microchip,mcp3002";
+		reg = <0>;
+		vref-supply = <&reg_3v3>;
+		spi-max-frequency = <1000000>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_3v3>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	i2c_rtc: rtc@51 {
+		compatible = "nxp,pcf85063";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&pwm3 {
+	/* used for LCD contrast control */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_5v0>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* no usbh2 */
+&usbphynop1 {
+	status = "disabled";
+};
+
+/* no usbh3 */
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5v0>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	cap-power-off-card;
+	full-pwr-cycle;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	mmc-ddr-1_8v;
+	vmmc-supply = <&reg_vcc_mmc>;
+	vqmmc-supply = <&reg_vcc_mmc_io>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX			0x3008
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX			0x1b000
+		>;
+	};
+
+	pinctrl_can1_stby: can1stbygrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x13008
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
+		>;
+	};
+
+	pinctrl_can2_stby: can2stbygrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11			0x13008
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0xb1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0xb1
+			/* *no* external pull up */
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24			0x58
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0xb1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0xb1
+			/* external pull up */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x58
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* RMII 50 MHz */
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x100f5
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x100f5
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x100c0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x100c0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x100f5
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x100f5
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05			0x58
+			/* GPIO for "link active" */
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24		0x3038
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE			0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE			0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B		0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B		0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B		0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B			0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B			0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00		0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01		0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02		0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03		0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04		0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05		0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06		0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x40010878
+			/* external 10 k pull up */
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x40010878
+		>;
+	};
+
+	pinctrl_mdio: mdiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__GPIO1_IO22		0x100b1
+			MX6QDL_PAD_ENET_MDC__GPIO1_IO31			0xb1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT			0x58
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT			0x58
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0xb0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			/* SoC internal pull up required */
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17059
+			/* SoC internal pull up required */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01			0x1b040
+			/* SoC internal pull up required */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00			0x1b040
+		>;
+	};
+
+	pinctrl_vcc_mmc: vccmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08			0x58
+		>;
+	};
+
+	pinctrl_vcc_mmc_io: vccmmciogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13			0x58
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-revc-lt2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-revc-lt2.dtsi
new file mode 100644
index 0000000000000..48c9ce051f47c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-revc-lt2.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2021 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	display {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l2rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-solidsense.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-solidsense.dtsi
new file mode 100644
index 0000000000000..234827e554d0f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-solidsense.dtsi
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2021 Russell King <rmk@armlinux.org.uk>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_solidsense_leds>;
+
+		/* Red/Green LED1 - next to WiFi SMA */
+		led-11 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Red/Green LED2 - next to GPS SMA */
+		led-21 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-22 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&audio {
+	status = "disabled";
+};
+
+&ecspi2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>, <&pinctrl_solidsense_hog>;
+
+	solidsense {
+		pinctrl_solidsense_hog: solidsense-hog {
+			fsl,pins = <
+				/* Nordic RESET_N */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x400130b1
+				/* Nordic Chip 1 SWDIO - GPIO 125 */
+				MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x400130b1
+				/* Nordic Chip 1 SWDCLK - GPIO 59 */
+				/* already claimed in the HB2 hogs */
+				/* MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 */
+				/* Nordic Chip 2 SWDIO - GPIO 81 */
+				MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x400130b1
+				/* Nordic Chip 2 SWCLK - GPIO 82 */
+				MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x400130b1
+			>;
+		};
+
+		pinctrl_solidsense_leds: solidsense-leds {
+			fsl,pins = <
+				/* Red LED 1 - GPIO 58 */
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x400130b1
+				/* Green LED 1 - GPIO 55 */
+				MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x400130b1
+				/* Red LED 2 - GPIO 57 */
+				MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x400130b1
+				/* Green LED 2 - GPIO 56 */
+				MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x400130b1
+			>;
+		};
+
+		pinctrl_solidsense_uart2: solidsense-uart2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_solidsense_uart3: solidsense-uart3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "disabled";
+};
+
+&sgtl5000 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_solidsense_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_solidsense_uart3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi
new file mode 100644
index 0000000000000..b55af61dfecab
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	clk_brcm: brcm-clock {
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
+		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_brcm: brcm-reg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 19 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
+			      <&gpio6 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_brcm>;
+		clock-names = "ext_clock";
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_brcm_bt: microsom-brcm-bt {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+				MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
+				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_osc: microsom-brcm-osc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_reg: microsom-brcm-reg {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
+				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+				MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_uart4: microsom-uart4 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_microsom_usdhc1: microsom-usdhc1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			>;
+		};
+	};
+};
+
+/* UART4 - Connected to optional BRCM Wifi/BT/FM */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-emmc.dtsi
new file mode 100644
index 0000000000000..5f3b8baab20ff
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-emmc.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_usdhc3: microsom-usdhc3 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+			>;
+		};
+	};
+};
+
+/* USDHC3 - eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi
new file mode 100644
index 0000000000000..352ac585ca6b8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	nvcc_sd1: regulator-nvcc-sd1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "nvcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	clk_ti_wifi: ti-wifi-clock {
+		/* This is a hack around the kernel - using "fixed clock"
+		 * results in the "pinctrl" properties being ignored, and
+		 * the clock not being output.  Instead, use a gated clock
+		 * and the unrouted WL_XTAL_PU gpio.
+		 */
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_clk>;
+		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	pwrseq_ti_wifi: ti-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_wifi_en>;
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		clocks = <&clk_ti_wifi>;
+		clock-names = "ext_clock";
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_ti_bt: microsom-ti-bt {
+			fsl,pins = <
+				/* BT_EN_SOC */
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_clk: microsom-ti-clk {
+			fsl,pins = <
+				/* EXT_32K */
+				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+				/* WL_XTAL_PU (unrouted) */
+				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-en {
+			fsl,pins = <
+				/* WLAN_EN_SOC */
+				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irq {
+			fsl,pins = <
+				/* WLAN_IRQ */
+				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_uart4: microsom-uart4 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_microsom_usdhc1: microsom-usdhc1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			>;
+		};
+	};
+};
+
+/* UART4 - Connected to optional TI Wi-Fi/BT/FM */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		clocks = <&clk_ti_wifi>;
+		clock-names = "ext_clock";
+		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_bt>;
+	};
+};
+
+/* USDHC1 - Connected to optional TI Wi-Fi/BT/FM */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_usdhc1>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&pwrseq_ti_wifi>;
+	cap-power-off-card;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	/* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupts-extended = <&gpio6 4 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_wifi_irq>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi
new file mode 100644
index 0000000000000..ce543e325cd30
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "vcc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
+	phy-mode = "rgmii-id";
+
+	/*
+	 * The PHY seems to require a long-enough reset duration to avoid
+	 * some rare issues where the PHY gets stuck in an inconsistent and
+	 * non-functional state at boot-up. 10ms proved to be fine .
+	 */
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * The PHY can appear at either address 0 or 4 due to the
+		 * configuration (LED) pin not being pulled sufficiently.
+		 */
+		ethernet-phy@0 {
+			reg = <0>;
+			qca,clk-out-frequency = <125000000>;
+			qca,smarteee-tw-us-1g = <24>;
+		};
+
+		ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+			qca,smarteee-tw-us-1g = <24>;
+		};
+
+		/*
+		 * ADIN1300 (som rev 1.9 or later) is always at address 1. It
+		 * will be enabled automatically by U-Boot if detected.
+		 */
+		ethernet-phy@1 {
+			reg = <1>;
+			adi,phy-output-clock = "125mhz-free-running";
+			status = "disabled";
+		};
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				/* AR8035 reset */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
+				/* AR8035 interrupt */
+				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+				/* GPIO16 -> AR8035 25MHz */
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x13030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+				/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+				/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+				/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				/* AR8035 pin strapping: MODE#0: pull down */
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+
+				/*
+				 * As the RMII pins are also connected to RGMII
+				 * so that an AR8030 can be placed, set these
+				 * to high-z with the same pulls as above.
+				 * Use the GPIO settings to avoid changing the
+				 * input select registers.
+				 */
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
+			>;
+		};
+
+		pinctrl_microsom_uart1: microsom-uart1 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi
new file mode 100644
index 0000000000000..344ea935c7dac
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	m25p80: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		m25p,fast-read;
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			/* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b099
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb099
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099
+			 /* eCSPI1 SS1 */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
+		>;
+	};
+
+	pinctrl_i2c1_recovery: i2c1recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b899
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+		>;
+	};
+};
+
+&pmic {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+	regulators {
+		reg_vddcore: sw1ab {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1875000>;
+			regulator-always-on;
+		};
+
+		reg_vddsoc: sw1c {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1875000>;
+			regulator-always-on;
+		};
+
+		reg_gen_3v3: sw2 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_ddr_1v5a: sw3a {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <1975000>;
+			regulator-always-on;
+		};
+
+		reg_ddr_1v5b: sw3b {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <1975000>;
+			regulator-always-on;
+		};
+
+		sw4_reg: sw4 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_5v_600mA: swbst {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5150000>;
+			regulator-always-on;
+		};
+
+		reg_snvs_3v: vsnvs {
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+
+		reg_vrefddr: vrefddr {
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		reg_vgen1_1v5: vgen1 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1550000>;
+			/* not used */
+		};
+
+		reg_vgen2_1v2_eth: vgen2 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1550000>;
+			regulator-always-on;
+		};
+
+		reg_vgen3_2v8: vgen3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vgen4_1v8: vgen4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vgen5_1v8_eth: vgen5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vgen6_3v3: vgen6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	disable-wp;
+	no-sd;
+	no-sdio;
+	bus-width = <8>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
new file mode 100644
index 0000000000000..aff46f3040c16
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+&fec {
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+	};
+
+	sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	/*
+	 * This pinmuxing is required for the ERR006687 workaround. Board
+	 * DTS files that enable the FEC controller with
+	 * fsl,err006687-workaround-present must include this group.
+	 */
+	pinctrl_enet_fix: enetfixgrp {
+		fsl,pins = <
+			/* ENET ping patch */
+			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
new file mode 100644
index 0000000000000..a3f6543c3aaa6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+	};
+
+	sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3p3v>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi
new file mode 100644
index 0000000000000..f88da757edda5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi
@@ -0,0 +1,479 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds1>;
+		compatible = "gpio-leds";
+
+		green-led {
+			label = "green-led";
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		red-led {
+			label = "red-led";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	n25q064: flash@0 {
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	isl12022: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+
+	gpio8: gpio@28 {
+		compatible = "technologic,ts4900-gpio";
+		reg = <0x28>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpio = <32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x100b1 /* Onboard flash CS1# */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x100b1 /* Offboard CS0# */
+			MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02	0x100b1 /* FPGA CS1# */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1 /* FPGA_RESET# */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* FPGA_DONE */
+			MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M	0x10    /* FPGA 24MHZ */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1 /* FPGA_IRQ */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b1 /* ETH_PHY_RESET */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1 /* OFF_BD_RESET# */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1 /* EN_USB_5V# */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x1b0b1 /* EN_LCD_3.3V */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* Audio CLK */
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1 /* DIO_1 */
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b1 /* DIO_2 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b1 /* DIO_3 */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b1 /* DIO_4 */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1 /* DIO_5 */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b1 /* DIO_7 */
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b1 /* DIO_8 */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b1 /* DIO_9 */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b1 /* DIO_0 */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b1 /* DIO_6 */
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x1b0b1 /* CPU_DIO_A */
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b1 /* DIO_2 */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b1 /* CPU_DIO_B */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1 /* BUS_ALE# */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1 /* DIO_15 */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1 /* BUS_DIR */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1 /* BUS_CS# */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* DIO_14 */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x1b0b1 /* DIO_16 */
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b0b1 /* DIO_12 */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1 /* DIO_18 */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b1 /* DIO_19 */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1 /* DIO_20 */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b1 /* BUS_BHE# */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1 /* DIO_13 */
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1 /* EIM_WAIT# */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b1 /* DIO_10 */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1 /* MUX_AD_00 */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1 /* MUX_AD_01 */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1 /* MUX_AD_02 */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1 /* MUX_AD_03 */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1 /* MUX_AD_04 */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1 /* MUX_AD_05 */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1 /* MUX_AD_06 */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1 /* MUX_AD_07 */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1 /* MUX_AD_08 */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1 /* MUX_AD_09 */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1 /* MUX_AD_10 */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1 /* MUX_AD_11 */
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1 /* MUX_AD_12 */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1 /* MUX_AD_13 */
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1 /* MUX_AD_14 */
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1 /* MUX_AD_15 */
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1 /* LCD_CLK */
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x1b0b1 /* DE */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b1 /* Hsync */
+			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b1 /* Vsync */
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds1: leds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1 /* RED_LED# */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1 /* GREEN_LED# */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x17059 /* WIFI IRQ */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b1 /* EN_SD_POWER# */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
new file mode 100644
index 0000000000000..1e0a041e9f60a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
@@ -0,0 +1,594 @@
+/*
+ * Copyright 2015 Technologic Systems
+ * Copyright 2017 Savoir-Faire Linux
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds1>;
+		compatible = "gpio-leds";
+
+		green-led {
+			label = "green-led";
+			gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		red-led {
+			label = "red-led";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		yel-led {
+			label = "yellow-led";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-led {
+			label = "blue-led";
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		en-usb-5v-led {
+			label = "en-usb-5v";
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		sel-dc-usb-led {
+			label = "sel_dc_usb";
+			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can1_3v3: reg_can1_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_can1_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_3v3: en-reg_can2_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_can2_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan_vmmc: regulator_wlan_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_vmmc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio8 14 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	sound-sgtl5000 {
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "On-board Codec";
+		mux-ext-port = <3>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_3v3>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	n25q064: flash@0 {
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <
+		&gpio5 31 GPIO_ACTIVE_LOW
+		&gpio7 12 GPIO_ACTIVE_LOW
+		&gpio5 18 GPIO_ACTIVE_LOW
+	>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	m41t00s: rtc@68 {
+		compatible = "m41t00";
+		reg = <0x68>;
+	};
+
+	isl12022: rtc@6f {
+		compatible = "isl,isl12022";
+		reg = <0x6f>;
+	};
+
+	gpio8: gpio@28 {
+		compatible = "technologic,ts7970-gpio";
+		reg = <0x28>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpios = <62>;
+	};
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x100b1 /* Onboard Flash CS */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2 {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK      0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI      0x100b1
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO     0x100b1
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31      0x100b1 /* FPGA_SPI_CS0 */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12         0x100b1 /* FPGA_SPI_CS1 */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18     0x100b1 /* HD1_SPI_CS */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21      0x1b088 /* FPGA_RESET */
+			MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x10    /* FPGA 24MHZ */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20    0x1b088 /* FPGA_IRQ_0 */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04          0x1b088 /* FPGA_IRQ_1 */
+		>;
+	};
+
+	pinctrl_enet: enet {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b088
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b088 /* ETH_PHY_RESET */
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b088
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b088
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b088 /* EN_CAN_1 */
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b088
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b088
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b088 /* EN_CAN_2 */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* Onboard */
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b088 /* USB_HUB_RESET */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b088 /* SEL_DC_USB */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b088 /* EN_USB_5V */
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b088 /* JTAG_FPGA_TMS */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b088 /* JTAG_FPGA_TCK */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b088 /* JTAG_FPGA_TDO */
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b088 /* JTAG_FPGA_TDI */
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b088 /* GYRO_INT */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b088 /* MODBUS_FAULT */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b088 /* BUS_DIR/JP_SD_BOOT */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x1b088 /* EN_MODBUS_24V */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b088 /* EN_MODBUS_3V */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b088 /* I210_RESET */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b088 /* EN_RTC_PWR */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b088 /* REVSTRAP1 */
+
+			/* Offboard */
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b088 /* LCD_D09 */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b088 /* HD1_IRQ */
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b088 /* LCD_D10 */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x1b088 /* LCD_D11 */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b088 /* BUS_BHE */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b088 /* BUS_ALE */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b088 /* BUS_CS */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b088 /* DIO_20 */
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b088 /* BUS_WAIT */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b088 /* MUX_AD_00 */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b088 /* MUX_AD_01 */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b088 /* MUX_AD_02 */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b088 /* MUX_AD_03 */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b088 /* MUX_AD_04 */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b088 /* MUX_AD_05 */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b088 /* MUX_AD_06 */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b088 /* MUX_AD_07 */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b088 /* MUX_AD_08 */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b088 /* MUX_AD_09 */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b088 /* MUX_AD_10 */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b088 /* MUX_AD_11 */
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b088 /* MUX_AD_12 */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b088 /* MUX_AD_13 */
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b088 /* MUX_AD_14 */
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b088 /* MUX_AD_15 */
+
+			/* Strapping only */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b088
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b088
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds1: leds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x1b088 /* GREEN_LED */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b088 /* RED_LED */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b088 /* YEL_LED */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b088 /* IMX6_BLUE_LED */
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* Audio CLK */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b088
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b088
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b088
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b088
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b088
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b088
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b088
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b088
+			MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b088
+			MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b088
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b088
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b088
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b088
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b088
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x17059 /* WIFI IRQ */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b088 /* EN_SD_POWER */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* WIFI */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	bus-width = <4>;
+	non-removable;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi
new file mode 100644
index 0000000000000..79f2354886b7d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd1_pwr>;
+		enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		turn-on-delay-ms = <35>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "edt,etm0700g0dh6";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_pwr>;
+		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		backlight = <&backlight>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_out>;
+			};
+		};
+	};
+
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				u-boot,panel-name = "edt,et057090dhu";
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				u-boot,panel-name = "edt,et0350g0dh6";
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				u-boot,panel-name = "edt,et0430g0dh6";
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				u-boot,panel-name = "edt,etm0700g0dh6";
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			CoMTFT { /* same as ET0700 but with inverted pixel clock */
+				u-boot,panel-name = "edt,etm0700g0edh6";
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_in>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi
new file mode 100644
index 0000000000000..2ca2eb37e14fc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi
@@ -0,0 +1,286 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_lcd0_pwr>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_lcd1_pwr>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	lvds0_panel: lvds0-panel {
+		compatible = "nlt,nl12880bc20-spwg-24";
+		backlight = <&backlight0>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	lvds1_panel: lvds1-panel {
+		compatible = "nlt,nl12880bc20-spwg-24";
+		backlight = <&backlight1>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+};
+
+&kpp {
+	status = "disabled"; /* pad conflict with backlight1 PWM */
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+
+		display-timings {
+			hsd100pxn1 {
+				u-boot,panel-name = "hannstar,hsd100pxn1";
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			nl12880bc20 {
+				u-boot,panel-name = "nlt,nl12880bc20-spwg-24";
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0700 {
+				u-boot,panel-name = "edt,etm0700g0dh6";
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				u-boot,panel-name = "edt,et057090dhu";
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+
+		display-timings {
+			hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_lcd0_pwr {
+	status = "okay";
+};
+
+&reg_lcd1_pwr {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi
new file mode 100644
index 0000000000000..99ec7a838f8d2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	backlight0 {
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		turn-on-delay-ms = <35>;
+		power-supply = <&reg_lcd1_pwr>;
+	};
+
+	backlight1 {
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		turn-on-delay-ms = <35>;
+		power-supply = <&reg_lcd1_pwr>;
+	};
+
+	lcd-panel {
+		compatible = "edt,et057090dhu";
+		pixelclk-active = <0>;
+	};
+
+	lvds0-panel {
+		compatible = "edt,etml1010g0dka";
+		pixelclk-active = <0>;
+	};
+
+	lvds1-panel {
+		compatible = "edt,etml1010g0dka";
+		pixelclk-active = <0>;
+	};
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	/*
+	 * The backup voltage of the module internal RTC is not wired
+	 * by default on the MB7, so disable that RTC chip.
+	 */
+	status = "disabled";
+};
+
+&i2c3 {
+	rtc: rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&reg_lcd0_pwr {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
new file mode 100644
index 0000000000000..e2fe337f7d9ed
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
@@ -0,0 +1,792 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	aliases {
+		can0 = &can2;
+		can1 = &can1;
+		ethernet0 = &fec;
+		lcdif-23bit-pins-a = &pinctrl_disp0_1;
+		lcdif-24bit-pins-a = &pinctrl_disp0_2;
+		pwm0 = &pwm1;
+		pwm1 = &pwm2;
+		reg-can-xcvr = &reg_can_xcvr;
+		stk5led = &user_led;
+		usbotg = &usbotg;
+		sdhc0 = &usdhc1;
+		sdhc1 = &usdhc2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>; /* will be filled by U-Boot */
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mclk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led: led-user {
+			label = "Heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_user_led>;
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3_etn: regulator-3v3-etn {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_ETN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_etnphy_power>;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan_xcvr>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_lcd0_pwr: regulator-lcd0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_pwr>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_lcd1_pwr: regulator-lcd1-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD1 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd1_pwr>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "karo,imx6qdl-tx6-sgtl5000",
+			     "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audmux>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	mux-pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <
+		&gpio2 30 GPIO_ACTIVE_HIGH
+		&gpio3 19 GPIO_ACTIVE_HIGH
+	>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	phy-reset-post-delay = <10>;
+	phy-handle = <&etnphy>;
+	phy-supply = <&reg_3v3_etn>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		etnphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy_int>;
+			interrupt-parent = <&gpio7>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	fsl,no-blockmark-swap;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ds1339: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+		trickle-resistor-ohms = <250>;
+		trickle-diode-disable;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 0>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <660>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1 /* PWR BTN */
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__AUD5_RXD		0x130b0 /* SSI1_RXD */
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0 /* SSI1_TXD */
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0 /* SSI1_CLK */
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0 /* SSI1_FS */
+		>;
+	};
+
+	pinctrl_disp0_1: disp0grp-1 {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			/* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_disp0_2: disp0grp-2 {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x0b0b0
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x0b0b0
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x0b0b0
+			MX6QDL_PAD_GPIO_19__ECSPI1_RDY		0x0b0b0
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x0b0b0 /* SPI CS0 */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x0b0b0 /* SPI CS1 */
+		>;
+	};
+
+	pinctrl_edt_ft5x06: edt-ft5x06grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* Interrupt */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b0 /* Reset */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b0 /* Wake */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet_mdio: enet-mdiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+		>;
+	};
+
+	pinctrl_etnphy_int: etnphy-intgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b1 /* ETN PHY INT */
+		>;
+	};
+
+	pinctrl_etnphy_power: etnphy-pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1 /* ETN PHY POWER */
+		>;
+	};
+
+	pinctrl_etnphy_rst: etnphy-rstgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT2__GPIO7_IO06		0x1b0b1 /* ETN PHY RESET */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b0 /* Flexcan XCVR enable */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0x0b0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0x0b0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0x0b0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0x0b0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0x0b0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0x0b0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0x0b0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0x0b0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0x0b0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0x0b0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0x0b0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0x0b0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0x0b0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x4001b8b1
+		>;
+	};
+
+	pinctrl_kpp: kppgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__KEY_COL6		0x1b0b1
+			MX6QDL_PAD_GPIO_4__KEY_COL7		0x1b0b1
+			MX6QDL_PAD_KEY_COL2__KEY_COL2		0x1b0b1
+			MX6QDL_PAD_KEY_COL3__KEY_COL3		0x1b0b1
+			MX6QDL_PAD_GPIO_2__KEY_ROW6		0x1b0b1
+			MX6QDL_PAD_GPIO_5__KEY_ROW7		0x1b0b1
+			MX6QDL_PAD_KEY_ROW2__KEY_ROW2		0x1b0b1
+			MX6QDL_PAD_KEY_ROW3__KEY_ROW3		0x1b0b1
+		>;
+	};
+
+	pinctrl_lcd0_pwr: lcd0-pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1 /* LCD Reset */
+		>;
+	};
+
+	pinctrl_lcd1_pwr: lcd-pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b1 /* LCD Power Enable */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_tsc2007: tsc2007grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0 /* Interrupt */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1_rtscts: uart1_rtsctsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT1__UART1_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD3_DAT0__UART1_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2_rtscts: uart2_rtsctsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_rtscts: uart3_rtsctsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT3__UART3_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD3_RST__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b0 /* USBH1_VBUSEN */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* USBOTG_VBUSEN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
+			MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x070b1
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x070b1
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x070b1
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x070b1
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x070b1
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x070b1
+			MX6QDL_PAD_SD3_CLK__GPIO7_IO03		0x170b0 /* SD2 CD */
+		>;
+	};
+
+	pinctrl_user_led: user-ledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* LED */
+		>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	/* sample keymap */
+	/* row/col 0,1 are mapped to KPP row/col 6,7 */
+	linux,keymap = <
+		MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */
+		MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */
+		MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */
+		MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */
+		MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */
+		MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */
+		MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */
+		MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */
+		MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */
+		MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */
+		MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */
+	>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi
new file mode 100644
index 0000000000000..93a8123da27db
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		backlight = &backlight;
+		panelchan = &panelchan;
+		panel7 = &panel7;
+		touchscreenp7 = &touchscreenp7;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpio1 4 0>;
+		default-on;
+		status = "disabled";
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio2 4 0>;
+		pinctrl-0 = <&pinctrl_power_off>;
+		pinctrl-names = "default";
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	panel7: panel7 {
+		/*
+		 * in reality it is a -20t (parallel) model,
+		 * but with LVDS bridge chip attached,
+		 * so it is equivalent to -19t model in drive
+		 * characteristics
+		 */
+		compatible = "urt,umsh-8596md-19t";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		power-supply = <&reg_panel>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_h1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
+			gpio = <&gpio7 12 0>;
+		};
+
+		reg_panel: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "lcd_panel";
+			enable-active-high;
+			gpio = <&gpio1 2 0>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-udoo-ac97",
+			     "fsl,imx-audio-ac97";
+		model = "fsl,imx6q-udoo-ac97";
+		audio-cpu = <&ssi1>;
+		audio-routing =
+			"RX", "Mic Jack",
+			"Headphone Jack", "TX";
+		mux-int-port = <1>;
+		mux-ext-port = <6>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreenp7: touchscreenp7@55 {
+		compatible = "sitronix,st1232";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreenp7>;
+		reg = <0x55>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 8>;
+		gpios = <&gpio1 15 0>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	imx6q-udoo {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
+			>;
+		};
+
+		pinctrl_panel: panelgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x70
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x70
+			>;
+		};
+
+		pinctrl_power_off: poweroffgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x30
+			>;
+		};
+
+		pinctrl_touchscreenp7: touchscreenp7grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x70
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh: usbhgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
+				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotg {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+				MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_ac97_running: ac97running {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+
+		pinctrl_ac97_warm_reset: ac97warmreset {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+
+		pinctrl_ac97_reset: ac97reset {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	panelchan: lvds-channel@0 {
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	clocks = <&clks IMX6QDL_CLK_CKO>;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&audmux {
+	status = "okay";
+};
+
+&ssi1 {
+	cell-index = <0>;
+	fsl,mode = "ac97-slave";
+	pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
+	pinctrl-0 = <&pinctrl_ac97_running>;
+	pinctrl-1 = <&pinctrl_ac97_reset>;
+	pinctrl-2 = <&pinctrl_ac97_warm_reset>;
+	ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi
new file mode 100644
index 0000000000000..200559d7158dc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Support for Variscite DART-MX6 Module
+ *
+ * Copyright 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <70000>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(2))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "disabled";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmicec>;
+	ddc-i2c-bus = <&i2c1>;
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	tlv320aic3106: codec@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		#sound-dai-cells = <0>;
+		DRVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_3p3v>;
+		ai3x-ocmv = <0>;
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmux {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			/* Audio Clock */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_bt: bt {
+		fsl,pins = <
+			/* Bluetooth enable */
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b1
+			/* Bluetooth Slow Clock */
+			MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+			/* SPI1 CS0 */
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+			/* SPI1 CS1 */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmicec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC INT */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17059
+			/* WL_EN */
+			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x17071
+			/* WL_IRQ */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08  0x17071
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170B9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100B9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170B9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170B9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170B9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170B9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170F9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100F9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170F9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170F9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170F9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170F9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK	0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0	0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1	0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2	0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+		>;
+	};
+};
+
+&pcie {
+	fsl,tx-swing-full = <103>;
+	fsl,tx-swing-low = <103>;
+	reset-gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio6 18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "disabled";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1-12inch.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1-12inch.dtsi
new file mode 100644
index 0000000000000..73f381e144672
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1-12inch.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 Protonic Holland
+ */
+
+/ {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		autorepeat;
+
+		power-button {
+			label = "Power Button";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	panel {
+		compatible = "kyo,tcg121xglp";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ9031RNX PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+			"CAM2_MIRROR", "", "", "SMBALERT",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+			"SD1_DATA3", "ETH_MDIO", "",
+		"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
+			"CAN2_SR", "CAN2_TX", "CAN2_RX",
+		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+			"HITCH_IN_OUT",
+		"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",
+			"ISB_LED";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
+			"I2S_BITCLK", "I2S_DOUT",
+		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
+			"ITU656_D6", "ITU656_D7", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
+			"RGMII_TD3",
+		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
+			"RGMII_RD2", "RGMII_RD3", "", "";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeygrp {
+		fsl,pins = <
+			/* nON_SWITCH */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
new file mode 100644
index 0000000000000..96e4f4b0b248f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
@@ -0,0 +1,712 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+#include <dt-bindings/display/sdtv-standards.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/tvp5150.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight_lcd: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <48>;
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight_led: backlight-led {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000 0>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <48>;
+		power-supply = <&reg_3v3>;
+	};
+
+	/* only for backwards compatibility with old HW */
+	backlight_isb: backlight-isb {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 8 48 255>;
+		num-interpolated-steps = <5>;
+		default-brightness-level = <0>;
+		power-supply = <&reg_3v3>;
+	};
+
+	connector {
+		compatible = "composite-video-connector";
+		label = "Composite0";
+		sdtv-standards = <SDTV_STD_PAL_B>;
+
+		port {
+			comp0_out: endpoint {
+				remote-endpoint = <&tvp5150_comp0_in>;
+			};
+		};
+	};
+
+	counter-0 {
+		compatible = "interrupt-counter";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_counter0>;
+		gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	};
+
+	counter-1 {
+		compatible = "interrupt-counter";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_counter1>;
+		gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	};
+
+	counter-2 {
+		compatible = "interrupt-counter";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_counter2>;
+		gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			label = "debug0";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "debug1";
+			function = LED_FUNCTION_DISK;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-2 {
+			label = "power_led";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-3 {
+			label = "isb_led";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>; /* Do NOT call fsl_ssi_set_dai_sysclk! */
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR	IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0				IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	termination-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	termination-ohms = <150>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&gpio2 {
+	gpio-line-names =
+		"YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "",
+		"", "LED_PWM", "", "", "",
+			"", "", "",
+		"", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH",
+		"POWER_LED", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
+			"CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ",
+		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
+			"YACO_RESET";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"EMMC_DAT5", "EMMC_DAT4", "EMMC_CMD", "EMMC_CLK", "EMMC_DAT0",
+			"EMMC_DAT1", "EMMC_DAT2", "EMMC_DAT3",
+		"EMMC_RST", "", "", "", "CAM_DETECT", "", "", "",
+		"", "EMMC_DAT7", "EMMC_DAT6", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+
+	video-decoder@5c {
+		compatible = "ti,tvp5150";
+		reg = <0x5c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tvp5150_comp0_in: endpoint {
+				remote-endpoint = <&comp0_out>;
+			};
+		};
+
+		/* Output port 2 is video output pad */
+		port@2 {
+			reg = <2>;
+
+			tvp5151_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsens0: temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28		0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
+			/* CAN2_SR */
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
+		>;
+	};
+
+	pinctrl_counter0: counter0grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00			0x1b000
+		>;
+	};
+
+	pinctrl_counter1: counter1grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01			0x1b000
+		>;
+	};
+
+	pinctrl_counter2: counter2grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02			0x1b000
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x000b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* ITU656_nRESET */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02			0x1b0b0
+			/* CAM1_MIRROR */
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03			0x130b0
+			/* CAM2_MIRROR */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
+			/* CAM_nDETECT */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
+			/* ISB_IN1 */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
+			/* ISB_nIN2 */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21			0x1b0b0
+			/* WARN_LIGHT */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19			0x100b0
+			/* ON2_FB */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b0
+			/* YACO_nIRQ */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x1b0b0
+			/* YACO_BOOT0 */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0x130b0
+			/* YACO_nRESET */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x1b0b0
+			/* FORCE_ON1 */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
+			/* AUDIO_nRESET */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21		0x1f0b0
+			/* ITU656_nPDN */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
+
+			/* New in HW revision 1 */
+			/* ON1_FB */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
+			/* DIP1_FB */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			/* DEBUG0 */
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16		0x1b0b0
+			/* DEBUG1 */
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
+			/* POWER_LED */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
+			/* ISB_LED */
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT			0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT			0x1b0b0
+		>;
+	};
+
+	/* YaCO AUX Uart */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
+		>;
+	};
+
+	/* YaCO Touchscreen UART */
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revb1.dtsi
new file mode 100644
index 0000000000000..e781a45785ed8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revb1.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-wandboard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x0f0b0		/* WL_REF_ON */
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x0f0b0		/* WL_RST_N */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
+				MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x80000000	/* BT_ON */
+				MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x80000000	/* BT_WAKE */
+				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */
+			>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revc1.dtsi
new file mode 100644
index 0000000000000..3874e74703f09
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revc1.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-wandboard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x0f0b0		/* WIFI_ON (reset, active low) */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON (unused) */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE, input */
+				MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x0f0b0		/* GPIO5_IO31 (Wifi Power Enable) */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE (unused) */
+				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x80000000	/* BT_ON */
+				MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x80000000	/* BT_WAKE */
+				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x80000000	/* BT_HOST_WAKE */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
+			>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi
new file mode 100644
index 0000000000000..9b8c9c23ab547
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+/ {
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "ETH_PHY";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-supply = <&reg_eth_phy>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-wandboard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* USDHC1 CD */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29   	0x1f0b1		/* RGMII PHY reset */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
+			>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi
new file mode 100644
index 0000000000000..e4f63423d8eee
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	sound {
+		compatible = "fsl,imx6-wandboard-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-wandboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c1>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mclk>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		lrclk-strength = <3>;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5645";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5645>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-frequency = <24000000>;
+		vdddo-supply = <&reg_1p8v>;
+		vdda-supply = <&reg_2p8v>;
+		vddd-supply = <&reg_1p5v>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5645_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	imx6qdl-wandboard {
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c1_gpio: i2c1gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b0
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b0
+				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b0
+			>;
+		};
+
+		pinctrl_mclk: mclkgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
+			>;
+		};
+
+		pinctrl_ov5645: ov5645grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RXD0__SPDIF_OUT		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usbotgvbus: usbotgvbusgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5645_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-zii-rdu2.dtsi
new file mode 100644
index 0000000000000..9ff183e4e069a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-zii-rdu2.dtsi
@@ -0,0 +1,1142 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2016-2017 Zodiac Inflight Innovations
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio1;
+		rtc0 = &ds1341;
+	};
+
+	mdio1: mdio {
+		compatible = "virtual,mdio-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mdio1>;
+		gpios = <&gpio6 5 GPIO_ACTIVE_HIGH
+		         &gpio6 4 GPIO_ACTIVE_HIGH>;
+
+		phy: ethernet-phy@0 {
+			pinctrl-0 = <&pinctrl_rmii_phy_irq>;
+			pinctrl-names = "default";
+			reg = <0>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	reg_28p0v: regulator-28p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "28V_IN";
+		regulator-min-microvolt = <28000000>;
+		regulator-max-microvolt = <28000000>;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_28p0v>;
+		regulator-name = "12V_MAIN";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v_main: regulator-5p0v-main {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12p0v>;
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v_pmic: regulator-3p3v-pmic {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12p0v>;
+		regulator-name = "PMIC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_3p3v_pmic>;
+		regulator-name = "GEN_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v_sd: regulator-3p3v-sd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_3p3v_sd>;
+		vin-supply = <&reg_3p3v>;
+		regulator-name = "3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3p3v_display: regulator-3p3v-display {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12p0v>;
+		regulator-name = "3V3_DISPLAY";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v_ssd: regulator-3p3v-ssd {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12p0v>;
+		regulator-name = "3V3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound1 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "front";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound1_codec>;
+		simple-audio-card,frame-master = <&sound1_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPA1 HPLEFT",
+			"Headphone Jack", "HPA1 HPRIGHT",
+			"HPA1 LEFTIN", "HPL",
+			"HPA1 RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa1>;
+
+		sound1_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound1_codec: simple-audio-card,codec {
+			sound-dai = <&codec1>;
+			clocks = <&cs2000>;
+		};
+	};
+
+	sound2 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "periph";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound2_codec>;
+		simple-audio-card,frame-master = <&sound2_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPA1 HPLEFT",
+			"Headphone Jack", "HPA1 HPRIGHT",
+			"HPA1 LEFTIN", "HPL",
+			"HPA1 RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa2>;
+
+		sound2_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound2_codec: simple-audio-card,codec {
+			sound-dai = <&codec2>;
+			clocks = <&cs2000>;
+		};
+	};
+
+	panel {
+		power-supply = <&reg_3p3v_display>;
+		backlight = <&sp_backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	disp0: disp0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			disp0_in_0: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			disp0_out: endpoint {
+				remote-endpoint = <&tc358767_in>;
+			};
+		};
+	};
+
+	cs2000_ref: cs2000-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	cs2000_in_dummy: cs2000-in-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	edp_refclk: edp-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+	                         <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&cpu0 {
+	fsl,soc-operating-points = <
+		/* ARM kHz  SOC-PU uV */
+		1200000 1300000
+		996000	1275000
+		852000	1275000
+		792000	1200000
+		396000	1200000
+	>;
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&ldb {
+	lvds-channel@0 {
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+
+	mcu {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		sp_backlight: backlight {
+			compatible = "zii,rave-sp-backlight";
+		};
+
+		pwrbutton {
+			compatible = "zii,rave-sp-pwrbutton";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "dds-eeprom";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "st,m25p128", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	usb-emulation-hog {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "usb-emulation";
+	};
+
+	usb-mode1-hog {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-mode1";
+	};
+
+	usb-pwr-hog {
+		gpio-hog;
+		gpios = <22 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "usb-pwr-ctrl-en-n";
+	};
+
+	usb-mode2-hog {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-mode2";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	codec2: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec2>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_3p3v>;
+		SPRVDD-supply = <&reg_3p3v>;
+		SPLVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&vgen4_reg>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	accel@1c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "fsl,mma8451";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio1>;
+		interrupt-names = "INT2";
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&reg_3p3v>;
+		vddio-supply = <&reg_3p3v>;
+	};
+
+	hpa2: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa2>;
+		reg = <0x60>;
+		power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0v_main>;
+		sound-name-prefix = "HPA1";
+	};
+
+	edp-bridge@68 {
+		compatible = "toshiba,tc358767";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tc358767>;
+		reg = <0x68>;
+		shutdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		clock-names = "ref";
+		clocks = <&edp_refclk>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				tc358767_in: endpoint {
+					remote-endpoint = <&disp0_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pfuze100_irq>;
+		reg = <0x08>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+
+	temp-sense@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	cs2000: clkgen@4e {
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4e>;
+		#clock-cells = <0>;
+		clock-names = "clk_in", "ref_clk";
+		clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24000000>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	ds1341: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	codec1: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec1>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_3p3v>;
+		SPRVDD-supply = <&reg_3p3v>;
+		SPLVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&vgen4_reg>;
+		reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&reg_5p0v_main>;
+		vio-supply = <&reg_3p3v>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <2>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			touchscreen-inverted-x;
+			touchscreen-swapped-x-y;
+			syna,sensor-type = <1>;
+			syna,delta-x-threshold = <5>;
+			syna,delta-y-threshold = <10>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-inverted-x;
+			touchscreen-swapped-x-y;
+			syna,sensor-type = <1>;
+		};
+	};
+
+	touchscreen@2a {
+		compatible = "eeti,exc3000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		reg = <0x2a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+		status = "disabled";
+	};
+
+	reg_5p0v_user_usb: charger@32 {
+		compatible = "microchip,ucs1002";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ucs1002_pins>;
+		reg = <0x32>;
+		interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+		                      <&gpio3 21 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "a_det", "alert";
+	};
+
+	hpa1: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa1>;
+		reg = <0x60>;
+		power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0v_main>;
+		sound-name-prefix = "HPA1";
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&disp0_in_0>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	host@0 {
+		reg = <0 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		i210: i210@0 {
+			reg = <0 0 0 0 0>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vmmc-supply = <&reg_3p3v_sd>;
+	vqmmc-supply = <&reg_3p3v>;
+	no-1-8-v;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vmmc-supply = <&reg_3p3v_sd>;
+	vqmmc-supply = <&reg_3p3v>;
+	no-1-8-v;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	no-1-8-v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&sata {
+	target-supply = <&reg_3p3v_ssd>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&phy>;
+	phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	phy-supply = <&reg_3p3v>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+
+		switch: switch@0 {
+			compatible = "marvell,mv88e6085";
+			pinctrl-0 = <&pinctrl_switch_irq>;
+			pinctrl-names = "default";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio6>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "gigabit_proc";
+					phy-handle = <&switchphy0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "netaux";
+					phy-handle = <&switchphy1>;
+				};
+
+				port@2 {
+					reg = <2>;
+					phy-mode = "rev-rmii";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "netright";
+					phy-handle = <&switchphy3>;
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "netleft";
+					phy-handle = <&switchphy4>;
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switchphy0: switchphy@0 {
+					reg = <0>;
+					interrupt-parent = <&switch>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy1: switchphy@1 {
+					reg = <1>;
+					interrupt-parent = <&switch>;
+					interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy2: switchphy@2 {
+					reg = <2>;
+					interrupt-parent = <&switch>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy3: switchphy@3 {
+					reg = <3>;
+					interrupt-parent = <&switch>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy4: switchphy@4 {
+					reg = <4>;
+					interrupt-parent = <&switch>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+	};
+};
+
+&usbh1 {
+	vbus-supply = <&reg_5p0v_main>;
+	disable-over-current;
+	maximum-speed = "full-speed";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v_user_usb>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+
+	mux-ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	mux-aud5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&iomuxc {
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x4001b000
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x130b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_codec1: dac1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x40000038
+		>;
+	};
+
+	pinctrl_codec2: dac2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x40000038
+		>;
+	};
+
+	pinctrl_disp0: disp0grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f9
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x100f9
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x100f9
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x100f9
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x100f9
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x100f9
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x100f9
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x100f9
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x100f9
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x100f9
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x100f9
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x100f9
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x100f9
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x100f9
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x100f9
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x100f9
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x100f9
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x100f9
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x100f9
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x100f9
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x100f9
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x100f9
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x100f9
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x100f9
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x100f9
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x100f9
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x100f9
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x100f9
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x000b1
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b1
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x100f5
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x100f5
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x100c0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x100c0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x100f5
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x100f5
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x40010040
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio3_hog: gpio3hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b811
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b811
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b811
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b811
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b811
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b811
+		>;
+	};
+
+	pinctrl_mdio1: bitbangmdiogrp {
+		fsl,pins = <
+			/* Bitbang MDIO for DEB Switch */
+			MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x4001b030
+			MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40018830
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x10038
+		>;
+	};
+
+	pinctrl_pfuze100_irq: pfuze100grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x40010000
+		>;
+	};
+
+	pinctrl_reg_3p3v_sd: mmcsupply1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x858
+		>;
+	};
+
+	pinctrl_rmii_phy_irq: phygrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x40010000
+		>;
+	};
+
+	pinctrl_switch_irq: switchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x4001b000
+		>;
+	};
+
+	pinctrl_tc358767: tc358767grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x10
+		>;
+	};
+
+	pinctrl_tpa1: tpa6130-1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x40000038
+		>;
+	};
+
+	pinctrl_tpa2: tpa6130-2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x40000038
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_ucs1002_pins: ucs1002grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02  	0x1b0b0
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21  	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x10059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10069
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x40010040
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x10059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10069
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x40010040
+
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
new file mode 100644
index 0000000000000..bda182edc5891
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
@@ -0,0 +1,1393 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		can0 = &can1;
+		can1 = &can2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		ipu0 = &ipu1;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		mmc3 = &usdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usb0 = &usbotg;
+		usb1 = &usbh1;
+		usb2 = &usbh2;
+		usb3 = &usbh3;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	clocks {
+		ckil {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ldb: ldb {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
+		gpr = <&gpr>;
+		status = "disabled";
+
+		lvds-channel@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+
+				lvds0_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_lvds0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds0_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_lvds0>;
+				};
+			};
+		};
+
+		lvds-channel@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+
+				lvds1_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_lvds1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds1_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_lvds1>;
+				};
+			};
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		dma_apbh: dma-controller@110000 {
+			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x00110000 0x2000>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
+		};
+
+		gpmi: nand-controller@112000 {
+			compatible = "fsl,imx6q-gpmi-nand";
+			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6QDL_CLK_GPMI_IO>,
+				 <&clks IMX6QDL_CLK_GPMI_APB>,
+				 <&clks IMX6QDL_CLK_GPMI_BCH>,
+				 <&clks IMX6QDL_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6QDL_CLK_PER1_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		hdmi: hdmi@120000 {
+			reg = <0x00120000 0x9000>;
+			interrupts = <0 115 0x04>;
+			gpr = <&gpr>;
+			clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
+				 <&clks IMX6QDL_CLK_HDMI_ISFR>;
+			clock-names = "iahb", "isfr";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					hdmi_mux_0: endpoint {
+						remote-endpoint = <&ipu1_di0_hdmi>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					hdmi_mux_1: endpoint {
+						remote-endpoint = <&ipu1_di1_hdmi>;
+					};
+				};
+			};
+		};
+
+		gpu_3d: gpu@130000 {
+			compatible = "vivante,gc";
+			reg = <0x00130000 0x4000>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+				 <&clks IMX6QDL_CLK_GPU3D_CORE>,
+				 <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+			clock-names = "bus", "core", "shader";
+			power-domains = <&pd_pu>;
+			#cooling-cells = <2>;
+		};
+
+		gpu_2d: gpu@134000 {
+			compatible = "vivante,gc";
+			reg = <0x00134000 0x4000>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
+				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+			#cooling-cells = <2>;
+		};
+
+		timer@a00600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x00a00600 0x20>;
+			interrupts = <1 13 0xf01>;
+			interrupt-parent = <&intc>;
+			clocks = <&clks IMX6QDL_CLK_TWD>;
+		};
+
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
+		L2: cache-controller@a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+			arm,shared-override;
+		};
+
+		pcie: pcie@1ffc000 {
+			compatible = "fsl,imx6q-pcie";
+			reg = <0x01ffc000 0x04000>,
+			      <0x01f00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0          0x01f80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
+				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
+				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy";
+			status = "disabled";
+		};
+
+		aips1: bus@2000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@2004000 {
+					compatible = "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>,
+					       <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
+						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
+						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
+						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
+					clock-names = "core",  "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "spba";
+					status = "disabled";
+				};
+
+				ecspi1: spi@2008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
+						 <&clks IMX6QDL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
+						 <&clks IMX6QDL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
+						 <&clks IMX6QDL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
+						 <&clks IMX6QDL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+						 <&clks IMX6QDL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				esai: esai@2024000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx35-esai";
+					reg = <0x02024000 0x4000>;
+					interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
+						 <&clks IMX6QDL_CLK_ESAI_MEM>,
+						 <&clks IMX6QDL_CLK_ESAI_EXTAL>,
+						 <&clks IMX6QDL_CLK_ESAI_IPG>,
+						 <&clks IMX6QDL_CLK_SPBA>;
+					clock-names = "core", "mem", "extal", "fsys", "spba";
+					dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ssi1: ssi@2028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6q-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_SSI1_IPG>,
+						 <&clks IMX6QDL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 37 1 0>,
+					       <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi2: ssi@202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6q-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
+						 <&clks IMX6QDL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 41 1 0>,
+					       <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi3: ssi@2030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6q-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_SSI3_IPG>,
+						 <&clks IMX6QDL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 45 1 0>,
+					       <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				asrc: asrc@2034000 {
+					compatible = "fsl,imx53-asrc";
+					reg = <0x02034000 0x4000>;
+					interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
+						<&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
+						<&clks IMX6QDL_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "spba";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+					dma-names = "rxa", "rxb", "rxc",
+							"txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
+					status = "okay";
+				};
+
+				spba-bus@203c000 {
+					reg = <0x0203c000 0x4000>;
+				};
+			};
+
+			vpu: vpu@2040000 {
+				compatible = "cnm,coda960";
+				reg = <0x02040000 0x3c000>;
+				interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 3 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "bit", "jpeg";
+				clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
+					 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
+				clock-names = "per", "ahb";
+				power-domains = <&pd_pu>;
+				resets = <&src 1>;
+				iram = <&ocram>;
+			};
+
+			aipstz@207c000 { /* AIPSTZ1 */
+				reg = <0x0207c000 0x4000>;
+			};
+
+			pwm1: pwm@2080000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm2: pwm@2084000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm3: pwm@2088000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm4: pwm@208c000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can1: can@2090000 {
+				compatible = "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_CAN1_IPG>,
+					 <&clks IMX6QDL_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x34 28>;
+				status = "disabled";
+			};
+
+			can2: can@2094000 {
+				compatible = "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_CAN2_IPG>,
+					 <&clks IMX6QDL_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x34 29>;
+				status = "disabled";
+			};
+
+			gpt: timer@2098000 {
+				compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_GPT_IPG>,
+					 <&clks IMX6QDL_CLK_GPT_IPG_PER>,
+					 <&clks IMX6QDL_CLK_GPT_3M>;
+				clock-names = "ipg", "per", "osc_per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@20b0000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@20b4000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 79 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: keypad@20b8000 {
+				compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@20bc000 {
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>;
+			};
+
+			wdog2: watchdog@20c0000 {
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>;
+				status = "disabled";
+			};
+
+			clks: clock-controller@20c4000 {
+				compatible = "fsl,imx6q-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_vdd1p1: regulator-1p1 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd3p0: regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd2p5: regulator-2p5 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2250000>;
+					regulator-max-microvolt = <2750000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2100000>;
+					anatop-max-voltage = <2875000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_pu: regulator-vddpu {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-enable-ramp-delay = <380>;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6q-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
+				};
+			};
+
+			usbphy1: usbphy@20c9000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@20ca000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBPHY2>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx6q-snvs-lpgpr";
+				};
+			};
+
+			epit1: epit@20d0000 { /* EPIT1 */
+				reg = <0x020d0000 0x4000>;
+				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@20d4000 { /* EPIT2 */
+				reg = <0x020d4000 0x4000>;
+				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: reset-controller@20d8000 {
+				compatible = "fsl,imx6q-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@20dc000 {
+				compatible = "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6QDL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+					pd_pu: power-domain@1 {
+						reg = <1>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_pu>;
+						clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+						         <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+						         <&clks IMX6QDL_CLK_GPU2D_CORE>,
+						         <&clks IMX6QDL_CLK_GPU2D_AXI>,
+						         <&clks IMX6QDL_CLK_OPENVG_AXI>,
+						         <&clks IMX6QDL_CLK_VPU_AXI>;
+					};
+				};
+			};
+
+			gpr: iomuxc-gpr@20e0000 {
+				compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
+				reg = <0x20e0000 0x38>;
+
+				mux: mux-controller {
+					compatible = "mmio-mux";
+					#mux-control-cells = <1>;
+				};
+			};
+
+			iomuxc: pinctrl@20e0000 {
+				compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
+				reg = <0x20e0000 0x4000>;
+			};
+
+			dcic1: dcic@20e4000 {
+				reg = <0x020e4000 0x4000>;
+				interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			dcic2: dcic@20e8000 {
+				reg = <0x020e8000 0x4000>;
+				interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sdma: dma-controller@20ec000 {
+				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+		};
+
+		aips2: bus@2100000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			crypto: crypto@2100000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x2100000 0x10000>;
+				ranges = <0 0x2100000 0x10000>;
+				clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
+					 <&clks IMX6QDL_CLK_CAAM_ACLK>,
+					 <&clks IMX6QDL_CLK_CAAM_IPG>,
+					 <&clks IMX6QDL_CLK_EIM_SLOW>;
+				clock-names = "mem", "aclk", "ipg", "emi_slow";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			aipstz@217c000 { /* AIPSTZ2 */
+				reg = <0x0217c000 0x4000>;
+			};
+
+			usbotg: usb@2184000 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh1: usb@2184200 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh2: usb@2184400 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphynop1>;
+				phy_type = "hsic";
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh3: usb@2184600 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184600 0x200>;
+				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphynop2>;
+				phy_type = "hsic";
+				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+			};
+
+			fec: ethernet@2188000 {
+				compatible = "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_ENET>,
+					 <&clks IMX6QDL_CLK_ENET>,
+					 <&clks IMX6QDL_CLK_ENET_REF>,
+					 <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+				clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+				fsl,stop-mode = <&gpr 0x34 27>;
+				nvmem-cells = <&fec_mac_addr>;
+				nvmem-cell-names = "mac-address";
+				status = "disabled";
+			};
+
+			mlb@218c000 {
+				reg = <0x0218c000 0x4000>;
+				interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 126 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usdhc1: mmc@2190000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USDHC1>,
+					 <&clks IMX6QDL_CLK_USDHC1>,
+					 <&clks IMX6QDL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@2194000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USDHC2>,
+					 <&clks IMX6QDL_CLK_USDHC2>,
+					 <&clks IMX6QDL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@2198000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USDHC3>,
+					 <&clks IMX6QDL_CLK_USDHC3>,
+					 <&clks IMX6QDL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc4: mmc@219c000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USDHC4>,
+					 <&clks IMX6QDL_CLK_USDHC4>,
+					 <&clks IMX6QDL_CLK_USDHC4>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			romcp@21ac000 {
+				reg = <0x021ac000 0x4000>;
+			};
+
+			mmdc0: memory-controller@21b0000 { /* MMDC0 */
+				compatible = "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
+			};
+
+			mmdc1: memory-controller@21b4000 { /* MMDC1 */
+				compatible = "fsl,imx6q-mmdc";
+				reg = <0x021b4000 0x4000>;
+				status = "disabled";
+			};
+
+			weim: weim@21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6q-weim";
+				reg = <0x021b8000 0x4000>;
+				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
+			ocotp: efuse@21bc000 {
+				compatible = "fsl,imx6q-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6QDL_CLK_IIM>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+
+				fec_mac_addr: mac-addr@88 {
+					reg = <0x88 6>;
+				};
+			};
+
+			tzasc@21d0000 { /* TZASC1 */
+				reg = <0x021d0000 0x4000>;
+				interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			tzasc@21d4000 { /* TZASC2 */
+				reg = <0x021d4000 0x4000>;
+				interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			audmux: audmux@21d8000 {
+				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			mipi_csi: mipi@21dc000 {
+				compatible = "fsl,imx6-mipi-csi2";
+				reg = <0x021dc000 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <0 100 0x04>, <0 101 0x04>;
+				clocks = <&clks IMX6QDL_CLK_HSI_TX>,
+					 <&clks IMX6QDL_CLK_VIDEO_27M>,
+					 <&clks IMX6QDL_CLK_EIM_PODF>;
+				clock-names = "dphy", "ref", "pix";
+				status = "disabled";
+			};
+
+			mipi_dsi: mipi@21e0000 {
+				reg = <0x021e0000 0x4000>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mipi_mux_0: endpoint {
+							remote-endpoint = <&ipu1_di0_mipi>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_mux_1: endpoint {
+							remote-endpoint = <&ipu1_di1_mipi>;
+						};
+					};
+				};
+			};
+
+			vdoa@21e4000 {
+				compatible = "fsl,imx6q-vdoa";
+				reg = <0x021e4000 0x4000>;
+				interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_VDOA>;
+			};
+
+			uart2: serial@21e8000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@21ec000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart4: serial@21f0000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+		};
+
+		ipu1: ipu@2400000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx6q-ipu";
+			reg = <0x02400000 0x400000>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_IPU1>,
+				 <&clks IMX6QDL_CLK_IPU1_DI0>,
+				 <&clks IMX6QDL_CLK_IPU1_DI1>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 2>;
+
+			ipu1_csi0: port@0 {
+				reg = <0>;
+
+				ipu1_csi0_from_ipu1_csi0_mux: endpoint {
+					remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>;
+				};
+			};
+
+			ipu1_csi1: port@1 {
+				reg = <1>;
+			};
+
+			ipu1_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu1_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu1_di0_hdmi: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&hdmi_mux_0>;
+				};
+
+				ipu1_di0_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_0>;
+				};
+
+				ipu1_di0_lvds0: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&lvds0_mux_0>;
+				};
+
+				ipu1_di0_lvds1: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&lvds1_mux_0>;
+				};
+			};
+
+			ipu1_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu1_di1_disp1: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu1_di1_hdmi: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&hdmi_mux_1>;
+				};
+
+				ipu1_di1_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_1>;
+				};
+
+				ipu1_di1_lvds0: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&lvds0_mux_1>;
+				};
+
+				ipu1_di1_lvds1: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&lvds1_mux_1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-mba6b.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-mba6b.dts
new file mode 100644
index 0000000000000..eee2e09d6e94a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-mba6b.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2015-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6qp-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6QP on MBa6x";
+	compatible = "tq,imx6qp-mba6x-b", "tq,mba6b",
+		     "tq,imx6qp-tqma6qp-b", "fsl,imx6qp";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_max.dts
new file mode 100644
index 0000000000000..741d1ed338ca2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_max.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX Board";
+	compatible = "boundary,imx6qp-nitrogen6_max", "fsl,imx6qp";
+};
+
+&pcie {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_som2.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_som2.dts
new file mode 100644
index 0000000000000..1593ac86b2a4c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_som2.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2017 Boundary Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-nitrogen6_som2.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_SOM2 Board";
+	compatible = "boundary,imx6qp-nitrogen6_som2", "fsl,imx6qp";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-phytec-mira-rdk-nand.dts
new file mode 100644
index 0000000000000..a18266598d39f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-phytec-mira-rdk-nand.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND";
+	compatible = "phytec,imx6qp-pbac06-nand", "phytec,imx6qp-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6qp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&m25p80 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts
new file mode 100644
index 0000000000000..ae00d538a4dfc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts
@@ -0,0 +1,557 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2018 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6qp.dtsi"
+
+/ {
+	model = "Protonic WD3 board";
+	compatible = "prt,prtwd3", "fsl,imx6qp";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	clock_ksz8081: clock-ksz8081 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	clock_ksz9031: clock-ksz9031 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clock_mcp251xfd: clock-mcp251xfd {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+	};
+
+	clock_sja1105: clock-sja1105 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	mdio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mdio>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpio5 6 GPIO_ACTIVE_HIGH
+			 &gpio5 7 GPIO_ACTIVE_HIGH>;
+
+		/* Microchip KSZ8081 */
+		usbeth_phy: ethernet-phy@3 {
+			reg = <0x3>;
+
+			interrupts-extended = <&gpio5 12 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <1000>;
+			clocks = <&clock_ksz8081>;
+			clock-names = "rmii-ref";
+			micrel,led-mode = <0>;
+		};
+
+		tja1102_phy0: ethernet-phy@4 {
+			reg = <0x4>;
+
+			interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <2000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tja1102_phy1: ethernet-phy@5 {
+				reg = <0x5>;
+
+				interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_5v0>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	switch@0 {
+		compatible = "nxp,sja1105q";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+		spi-rx-delay-us = <1>;
+		spi-tx-delay-us = <1>;
+		spi-cpha;
+
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+
+		clocks = <&clock_sja1105>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "usb";
+				phy-handle = <&usbeth_phy>;
+				phy-mode = "rmii";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "t1slave";
+				phy-handle = <&tja1102_phy1>;
+				phy-mode = "rmii";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "t1master";
+				phy-handle = <&tja1102_phy0>;
+				phy-mode = "rmii";
+
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "rj45";
+				phy-handle = <&rgmii_phy>;
+				phy-mode = "rgmii-id";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "cpu";
+				ethernet = <&fec>;
+				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
+
+				fixed-link {
+					speed = <100>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp251xfd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can2>;
+		reg = <0>;
+		clocks = <&clock_mcp251xfd>;
+		spi-max-frequency = <10000000>;
+		interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF>;
+	assigned-clock-rates = <125000000>;
+	status = "okay";
+
+	phy-mode = "rgmii";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ9031 */
+		rgmii_phy: ethernet-phy@2 {
+			reg = <2>;
+
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+
+			clocks = <&clock_ksz9031>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "SD1_CD", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "PHY3_RESET", "", "", "PHY3_INT", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "BOARD_ID3",
+			"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
+		"", "", "", "", "", "", "", "",
+		"", "", "ECSPI2_SS0", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "USB_OTG_OC", "USB_OTG_PWR", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "CAN1_SR", "CAN2_SR", "", "",
+		"", "", "", "", "", "", "", "",
+		"ECSPI3_SS0", "CANFD_INT", "USB_ETH_RESET", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "SW_RESET", "", "",
+		"PHY12_INT", "PHY12_RESET", "PHY12_EN", "PHY0_RESET",
+			"PHY0_INT", "", "", "",
+		"", "", "DISP1_EN", "DISP1_LR", "DISP1_TS_IRQ", "LVDS1_PD",
+			"", "",
+		"", "LVDS1_INT", "", "", "DISP0_LR", "DISP0_TS_IRQ",
+			"DISP0_EN", "CAM_GPIO0";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"LVDS0_INT", "LVDS0_PD", "CAM_INT", "CAM_GPIO1", "CAM_PD",
+			"CAM_LOCK", "", "POWER_TG",
+		"POWER_VSEL", "", "WLAN_REG_ON", "USB_ETH_CHG", "", "",
+			"USB_ETH_CHG_ID0", "USB_ETH_CHG_ID1",
+		"USB_ETH_CHG_ID2", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	/* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* VIN */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* VBUS */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* ICHG */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		channel@7 {
+			reg = <7>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			/* CAN2_nINT */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25		0x1b0b1
+			/* CAN2_SR */
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13070
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x000b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK		0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI		0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO		0x100b1
+			/* CS */
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24		0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030
+
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030
+
+			/* Configure clock provider for RGMII ref clock */
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x4001b0b0
+			/* Configure clock consumer for RGMII ref clock */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030
+
+			/* SJA1105Q switch reset */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05		0x10030
+
+			/* phy3/rgmii_phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x10030
+			/* phy3/rgmii_phy int */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x40010000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
+		>;
+	};
+
+	pinctrl_mdio: mdiogrp {
+		fsl,pins = <
+			/* phy0/usbeth_phy reset */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11		0x10030
+			/* phy0/usbeth_phy int */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12		0x100b1
+
+			/* phy12/tja1102_phy0 reset */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09		0x10030
+			/* phy12/tja1102_phy0 int */
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08		0x100b1
+			/* phy12/tja1102_phy0 enable. Set 100K pull-up */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10		0x1f030
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD			0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK			0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0			0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1			0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2			0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3			0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10		0x13069
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts
new file mode 100644
index 0000000000000..2bb3bfb18ec3e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
+	compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+};
+
+&i2c2 {
+	max7322: gpio@68 {
+		compatible = "maxim,max7322";
+		reg = <0x68>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	imx6qdl-sabreauto {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO          0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC           0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b018
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b018
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b018
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b018
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b018
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b018
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b018
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b018
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b018
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b018
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b018
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b018
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vgen3_reg {
+	regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dts
new file mode 100644
index 0000000000000..f69eec18d8657
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
+	compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+};
+
+&reg_arm {
+	vin-supply = <&sw2_reg>;
+};
+
+&iomuxc {
+	imx6qdl-sabresd {
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+	};
+};
+
+&vgen3_reg {
+	regulator-always-on;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qp-tqma6b.dtsi
new file mode 100644
index 0000000000000..bb6ff7c64b271
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tqma6b.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qp.dtsi"
+#include "imx6qdl-tqma6b.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts
new file mode 100644
index 0000000000000..92b38e6699aaf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6qp-tx6qp-8037.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-8037 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts
new file mode 100644
index 0000000000000..ffc0f2ee11d23
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6QP-8037 Module";
+	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts
new file mode 100644
index 0000000000000..07ad70718aec5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6qp-tx6qp-8137.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-8137 Module on MB7 baseboard";
+	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts
new file mode 100644
index 0000000000000..dd494d587014e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6QP-8137 Module";
+	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-vicutp.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-vicutp.dts
new file mode 100644
index 0000000000000..49ff145fffe54
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-vicutp.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
+
+/ {
+	model = "Kverneland UT1P Board";
+	compatible = "kvg,vicutp", "fsl,imx6qp";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-wandboard-revd1.dts
new file mode 100644
index 0000000000000..08d8b78a2096f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-wandboard-revd1.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 QuadPlus Board revD1";
+	compatible = "wand,imx6qp-wandboard", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-crux-plus.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-crux-plus.dts
new file mode 100644
index 0000000000000..afaf4a6759d4b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-crux-plus.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Crux+ i.MX6QuadPlus board";
+	compatible = "ysoft,imx6qp-yapp4-crux-plus", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts
new file mode 100644
index 0000000000000..4a961a33bf2d0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Pegasus+ i.MX6QuadPlus board";
+	compatible = "ysoft,imx6qp-yapp4-pegasus-plus", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-zii-rdu2.dts
new file mode 100644
index 0000000000000..57de447c4609d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-zii-rdu2.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2016-2017 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-zii-rdu2.dtsi"
+
+/ {
+	model = "ZII RDU2+ Board";
+	compatible = "zii,imx6qp-zii-rdu2", "fsl,imx6qp";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
+
+&gpu_3d {
+	assigned-clocks = <&clks IMX6QDL_CLK_GPU3D_SHADER_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD1_594M>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qp.dtsi
new file mode 100644
index 0000000000000..fc164991d2ae8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+#include "imx6q.dtsi"
+
+/ {
+	soc {
+		ocram2: sram@940000 {
+			compatible = "mmio-sram";
+			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		ocram3: sram@960000 {
+			compatible = "mmio-sram";
+			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		bus@2100000 {
+			pre1: pre@21c8000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021c8000 0x1000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE0>;
+				clock-names = "axi";
+				fsl,iram = <&ocram2>;
+			};
+
+			pre2: pre@21c9000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021c9000 0x1000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE1>;
+				clock-names = "axi";
+				fsl,iram = <&ocram2>;
+			};
+
+			pre3: pre@21ca000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021ca000 0x1000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE2>;
+				clock-names = "axi";
+				fsl,iram = <&ocram3>;
+			};
+
+			pre4: pre@21cb000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021cb000 0x1000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE3>;
+				clock-names = "axi";
+				fsl,iram = <&ocram3>;
+			};
+
+			prg1: prg@21cc000 {
+				compatible = "fsl,imx6qp-prg";
+				reg = <0x021cc000 0x1000>;
+				clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
+					 <&clks IMX6QDL_CLK_PRG0_AXI>;
+				clock-names = "ipg", "axi";
+				fsl,pres = <&pre1>, <&pre2>, <&pre3>;
+			};
+
+			prg2: prg@21cd000 {
+				compatible = "fsl,imx6qp-prg";
+				reg = <0x021cd000 0x1000>;
+				clocks = <&clks IMX6QDL_CLK_PRG1_APB>,
+					 <&clks IMX6QDL_CLK_PRG1_AXI>;
+				clock-names = "ipg", "axi";
+				fsl,pres = <&pre4>, <&pre2>, <&pre3>;
+			};
+		};
+	};
+};
+
+&fec {
+	interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 119 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpc {
+	compatible = "fsl,imx6qp-gpc", "fsl,imx6q-gpc";
+};
+
+&ipu1 {
+	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+	fsl,prg = <&prg1>;
+};
+
+&ipu2 {
+	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+	fsl,prg = <&prg2>;
+};
+
+&ldb {
+	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
+		      "di0", "di1";
+};
+
+&mmdc0 {
+	compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
+};
+
+&pcie {
+	compatible = "fsl,imx6qp-pcie";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6s-dhcom-drc02.dts b/arch/arm/boot/dts/nxp/imx/imx6s-dhcom-drc02.dts
new file mode 100644
index 0000000000000..4077b607c29ea
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6s-dhcom-drc02.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6S-C0800-R102-F0409-E-CAN2-RTC-I-01D2
+ * DHCOM PCB number: 493-400 or newer
+ * DRC02 PCB number: 568-100 or newer
+ */
+/dts-v1/;
+
+/*
+ * The kernel only distinguishes between i.MX6 Quad and DualLite,
+ * but the Solo is actually a DualLite with only one CPU. So use
+ * DualLite for the Solo and disable one CPU node.
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-drc02.dtsi"
+
+/ {
+	model = "DH electronics i.MX6S DHCOM on DRC02";
+	compatible = "dh,imx6s-dhcom-drc02", "dh,imx6s-dhcom-som",
+		     "fsl,imx6dl";
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts
new file mode 100644
index 0000000000000..239bc6dfc5846
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts
@@ -0,0 +1,658 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+//Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloLite EVK Board";
+	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight_display: backlight_display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user {
+			label = "debug";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_aud3v: regulator-aud3v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-3v15";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-boot-on;
+	};
+
+	reg_aud4v: regulator-aud4v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-4v2";
+		regulator-min-microvolt = <4325000>;
+		regulator-max-microvolt = <4325000>;
+		regulator-boot-on;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+		hp-det-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6sl-evk {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
+				MX6SL_PAD_KEY_COL7__GPIO4_IO06    0x17059
+				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
+				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
+				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
+				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
+				MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+			>;
+		};
+
+		pinctrl_audmux3: audmux3grp {
+			fsl,pins = <
+				MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130b0
+				MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130b0
+				MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110b0
+				MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
+				MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
+				MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
+				MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11	0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX6SL_PAD_FEC_MDC__FEC_MDC		0x1b0b0
+				MX6SL_PAD_FEC_MDIO__FEC_MDIO		0x1b0b0
+				MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV		0x1b0b0
+				MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0	0x1b0b0
+				MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1	0x1b0b0
+				MX6SL_PAD_FEC_TX_EN__FEC_TX_EN		0x1b0b0
+				MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0	0x1b0b0
+				MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1	0x1b0b0
+				MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
+			>;
+		};
+
+		pinctrl_fec_sleep: fecgrp-sleep {
+			fsl,pins = <
+				MX6SL_PAD_FEC_MDC__GPIO4_IO23      0x3080
+				MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25   0x3080
+				MX6SL_PAD_FEC_RXD0__GPIO4_IO17     0x3080
+				MX6SL_PAD_FEC_RXD1__GPIO4_IO18     0x3080
+				MX6SL_PAD_FEC_TX_EN__GPIO4_IO22    0x3080
+				MX6SL_PAD_FEC_TXD0__GPIO4_IO24     0x3080
+				MX6SL_PAD_FEC_TXD1__GPIO4_IO16     0x3080
+				MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26  0x3080
+			>;
+		};
+
+		pinctrl_hp: hpgrp {
+			fsl,pins = <
+				MX6SL_PAD_FEC_RX_ER__GPIO4_IO19	  0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
+				MX6SL_PAD_I2C1_SDA__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C2_SCL__I2C2_SCL	0x4001b8b1
+				MX6SL_PAD_I2C2_SDA__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
+				MX6SL_PAD_KEY_ROW1__KEY_ROW1    0x1b010
+				MX6SL_PAD_KEY_ROW2__KEY_ROW2    0x1b0b0
+				MX6SL_PAD_KEY_COL0__KEY_COL0    0x110b0
+				MX6SL_PAD_KEY_COL1__KEY_COL1    0x110b0
+				MX6SL_PAD_KEY_COL2__KEY_COL2    0x110b0
+			>;
+		};
+
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0
+				MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0
+				MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0
+				MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0
+				MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0
+				MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0
+				MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0
+				MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0
+				MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0
+				MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0
+				MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0
+				MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0
+				MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0
+				MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0
+				MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0
+				MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0
+				MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0
+				MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0
+				MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0
+				MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0
+				MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0
+				MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0
+				MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0
+				MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0
+				MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0
+				MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0
+				MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0
+				MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
+			>;
+		};
+
+		pinctrl_pwm1: pwmgrp {
+			fsl,pins = <
+				MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
+			>;
+		};
+
+		pinctrl_reg_lcd_3v3: reglcd3v3grp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW5__GPIO4_IO03    0x17059
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
+				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg1: usbotg1grp {
+			fsl,pins = <
+				MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x17059
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x10059
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x17059
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x17059
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x17059
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170b9
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100b9
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170b9
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170b9
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170b9
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170b9
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170b9
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170b9
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170b9
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170f9
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100f9
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170f9
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170f9
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170f9
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100b9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100f9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			>;
+		};
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+			MATRIX_KEY(0x0, 0x0, KEY_UP)         /* ROW0, COL0 */
+			MATRIX_KEY(0x0, 0x1, KEY_DOWN)       /* ROW0, COL1 */
+			MATRIX_KEY(0x0, 0x2, KEY_ENTER)      /* ROW0, COL2 */
+			MATRIX_KEY(0x1, 0x0, KEY_HOME)       /* ROW1, COL0 */
+			MATRIX_KEY(0x1, 0x1, KEY_RIGHT)      /* ROW1, COL1 */
+			MATRIX_KEY(0x1, 0x2, KEY_LEFT)       /* ROW1, COL2 */
+			MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
+			MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP)   /* ROW2, COL1 */
+	>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-kobo-aura2.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-kobo-aura2.dts
new file mode 100644
index 0000000000000..657d0f1b6115f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-kobo-aura2.dts
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Kobo Aura 2 ebook reader
+ *
+ * Name on mainboard is: 37NB-E60QL0+4B1
+ * Serials start with: E60QL2
+ *
+ * Copyright 2022 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Kobo Aura 2";
+	compatible = "kobo,aura2", "fsl,imx6sl";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-0 {
+			label = "koboaura2:white:on";
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_WHITE>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_power>;
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reset>;
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		compatible = "ti,lm3630a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+		reg = <0x36>;
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* eKTF2232 at 0x15 */
+	/* FP9928 at 0x48 */
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ricoh_gpio>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3100000>;
+					regulator-suspend-min-microvolt = <3100000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			/* IR_3V3 */
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_arm {
+	vin-supply = <&dcdc3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&snvs_rtc {
+	/*
+	 * We are using the RTC in the PMIC, but this one is not disabled
+	 * in imx6sl.dtsi.
+	 */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4, through-holes */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	/* TP198, next to J4, SMD pads */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	non-removable;
+	status = "okay";
+
+	/* internal uSD card */
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * RTL8189F SDIO WiFi
+	 */
+};
+
+&usbotg1 {
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CLK__GPIO5_IO15	0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11	0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28	0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6sl-pinfunc.h
new file mode 100644
index 0000000000000..bcf16060ecdc1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-pinfunc.h
@@ -0,0 +1,1073 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6SL_PINFUNC_H
+#define __DTS_IMX6SL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT          0x04c 0x2a4 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_MCLK__PWM4_OUT               0x04c 0x2a4 0x000 0x1 0x0
+#define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY             0x04c 0x2a4 0x6b4 0x2 0x0
+#define MX6SL_PAD_AUD_MCLK__FEC_MDC                0x04c 0x2a4 0x000 0x3 0x0
+#define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB      0x04c 0x2a4 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_MCLK__GPIO1_IO06             0x04c 0x2a4 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK          0x04c 0x2a4 0x7f4 0x6 0x0
+#define MX6SL_PAD_AUD_RXC__AUD3_RXC                0x050 0x2a8 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_RXC__I2C1_SDA                0x050 0x2a8 0x720 0x1 0x0
+#define MX6SL_PAD_AUD_RXC__UART3_TX_DATA           0x050 0x2a8 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_RXC__UART3_RX_DATA           0x050 0x2a8 0x80c 0x2 0x0
+#define MX6SL_PAD_AUD_RXC__FEC_TX_CLK              0x050 0x2a8 0x70c 0x3 0x0
+#define MX6SL_PAD_AUD_RXC__I2C3_SDA                0x050 0x2a8 0x730 0x4 0x0
+#define MX6SL_PAD_AUD_RXC__GPIO1_IO01              0x050 0x2a8 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_RXC__ECSPI3_SS1              0x050 0x2a8 0x6c4 0x6 0x0
+#define MX6SL_PAD_AUD_RXD__AUD3_RXD                0x054 0x2ac 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_RXD__ECSPI3_MOSI             0x054 0x2ac 0x6bc 0x1 0x0
+#define MX6SL_PAD_AUD_RXD__UART4_RX_DATA           0x054 0x2ac 0x814 0x2 0x0
+#define MX6SL_PAD_AUD_RXD__UART4_TX_DATA           0x054 0x2ac 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_RXD__FEC_RX_ER               0x054 0x2ac 0x708 0x3 0x0
+#define MX6SL_PAD_AUD_RXD__SD1_LCTL                0x054 0x2ac 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_RXD__GPIO1_IO02              0x054 0x2ac 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_RXFS__AUD3_RXFS              0x058 0x2b0 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_RXFS__I2C1_SCL               0x058 0x2b0 0x71c 0x1 0x0
+#define MX6SL_PAD_AUD_RXFS__UART3_RX_DATA          0x058 0x2b0 0x80c 0x2 0x1
+#define MX6SL_PAD_AUD_RXFS__UART3_TX_DATA          0x058 0x2b0 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_RXFS__FEC_MDIO               0x058 0x2b0 0x6f4 0x3 0x0
+#define MX6SL_PAD_AUD_RXFS__I2C3_SCL               0x058 0x2b0 0x72c 0x4 0x0
+#define MX6SL_PAD_AUD_RXFS__GPIO1_IO00             0x058 0x2b0 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_RXFS__ECSPI3_SS0             0x058 0x2b0 0x6c0 0x6 0x0
+#define MX6SL_PAD_AUD_TXC__AUD3_TXC                0x05c 0x2b4 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_TXC__ECSPI3_MISO             0x05c 0x2b4 0x6b8 0x1 0x0
+#define MX6SL_PAD_AUD_TXC__UART4_TX_DATA           0x05c 0x2b4 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_TXC__UART4_RX_DATA           0x05c 0x2b4 0x814 0x2 0x1
+#define MX6SL_PAD_AUD_TXC__FEC_RX_DV               0x05c 0x2b4 0x704 0x3 0x0
+#define MX6SL_PAD_AUD_TXC__SD2_LCTL                0x05c 0x2b4 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_TXC__GPIO1_IO03              0x05c 0x2b4 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_TXD__AUD3_TXD                0x060 0x2b8 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_TXD__ECSPI3_SCLK             0x060 0x2b8 0x6b0 0x1 0x0
+#define MX6SL_PAD_AUD_TXD__UART4_CTS_B             0x060 0x2b8 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_TXD__UART4_RTS_B             0x060 0x2b8 0x810 0x2 0x0
+#define MX6SL_PAD_AUD_TXD__FEC_TX_DATA0            0x060 0x2b8 0x000 0x3 0x0
+#define MX6SL_PAD_AUD_TXD__SD4_LCTL                0x060 0x2b8 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_TXD__GPIO1_IO05              0x060 0x2b8 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_TXFS__AUD3_TXFS              0x064 0x2bc 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_TXFS__PWM3_OUT               0x064 0x2bc 0x000 0x1 0x0
+#define MX6SL_PAD_AUD_TXFS__UART4_RTS_B            0x064 0x2bc 0x810 0x2 0x1
+#define MX6SL_PAD_AUD_TXFS__UART4_CTS_B            0x064 0x2bc 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_TXFS__FEC_RX_DATA1           0x064 0x2bc 0x6fc 0x3 0x0
+#define MX6SL_PAD_AUD_TXFS__SD3_LCTL               0x064 0x2bc 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_TXFS__GPIO1_IO04             0x064 0x2bc 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO         0x068 0x358 0x684 0x0 0x0
+#define MX6SL_PAD_ECSPI1_MISO__AUD4_TXFS           0x068 0x358 0x5f8 0x1 0x0
+#define MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B         0x068 0x358 0x818 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MISO__UART5_CTS_B         0x068 0x358 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MISO__EPDC_BDR0           0x068 0x358 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_MISO__SD2_WP              0x068 0x358 0x834 0x4 0x0
+#define MX6SL_PAD_ECSPI1_MISO__GPIO4_IO10          0x068 0x358 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI         0x06c 0x35c 0x688 0x0 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__AUD4_TXC            0x06c 0x35c 0x5f4 0x1 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA       0x06c 0x35c 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__UART5_RX_DATA       0x06c 0x35c 0x81c 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__EPDC_VCOM1          0x06c 0x35c 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__SD2_VSELECT         0x06c 0x35c 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__GPIO4_IO09          0x06c 0x35c 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK         0x070 0x360 0x67c 0x0 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__AUD4_TXD            0x070 0x360 0x5e8 0x1 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA       0x070 0x360 0x81c 0x2 0x1
+#define MX6SL_PAD_ECSPI1_SCLK__UART5_TX_DATA       0x070 0x360 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__EPDC_VCOM0          0x070 0x360 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__SD2_RESET           0x070 0x360 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__GPIO4_IO08          0x070 0x360 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC         0x070 0x360 0x820 0x6 0x0
+#define MX6SL_PAD_ECSPI1_SS0__ECSPI1_SS0           0x074 0x364 0x68c 0x0 0x0
+#define MX6SL_PAD_ECSPI1_SS0__AUD4_RXD             0x074 0x364 0x5e4 0x1 0x0
+#define MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B          0x074 0x364 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_SS0__UART5_RTS_B          0x074 0x364 0x818 0x2 0x1
+#define MX6SL_PAD_ECSPI1_SS0__EPDC_BDR1            0x074 0x364 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_SS0__SD2_CD_B             0x074 0x364 0x830 0x4 0x0
+#define MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11           0x074 0x364 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_SS0__USB_OTG2_PWR         0x074 0x364 0x000 0x6 0x0
+#define MX6SL_PAD_ECSPI2_MISO__ECSPI2_MISO         0x078 0x368 0x6a0 0x0 0x0
+#define MX6SL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0     0x078 0x368 0x000 0x1 0x0
+#define MX6SL_PAD_ECSPI2_MISO__UART3_RTS_B         0x078 0x368 0x808 0x2 0x0
+#define MX6SL_PAD_ECSPI2_MISO__UART3_CTS_B         0x078 0x368 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_MISO__CSI_MCLK            0x078 0x368 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI2_MISO__SD1_WP              0x078 0x368 0x82c 0x4 0x0
+#define MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14          0x078 0x368 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_MISO__USB_OTG1_OC         0x078 0x368 0x824 0x6 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__ECSPI2_MOSI         0x07c 0x36c 0x6a4 0x0 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1     0x07c 0x36c 0x000 0x1 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__UART3_TX_DATA       0x07c 0x36c 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__UART3_RX_DATA       0x07c 0x36c 0x80c 0x2 0x2
+#define MX6SL_PAD_ECSPI2_MOSI__CSI_HSYNC           0x07c 0x36c 0x670 0x3 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__SD1_VSELECT         0x07c 0x36c 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13          0x07c 0x36c 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__ECSPI2_SCLK         0x080 0x370 0x69c 0x0 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK       0x080 0x370 0x7f4 0x1 0x1
+#define MX6SL_PAD_ECSPI2_SCLK__UART3_RX_DATA       0x080 0x370 0x80c 0x2 0x3
+#define MX6SL_PAD_ECSPI2_SCLK__UART3_TX_DATA       0x080 0x370 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__CSI_PIXCLK          0x080 0x370 0x674 0x3 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__SD1_RESET           0x080 0x370 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__GPIO4_IO12          0x080 0x370 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC         0x080 0x370 0x820 0x6 0x1
+#define MX6SL_PAD_ECSPI2_SS0__ECSPI2_SS0           0x084 0x374 0x6a8 0x0 0x0
+#define MX6SL_PAD_ECSPI2_SS0__ECSPI1_SS3           0x084 0x374 0x698 0x1 0x0
+#define MX6SL_PAD_ECSPI2_SS0__UART3_CTS_B          0x084 0x374 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_SS0__UART3_RTS_B          0x084 0x374 0x808 0x2 0x1
+#define MX6SL_PAD_ECSPI2_SS0__CSI_VSYNC            0x084 0x374 0x678 0x3 0x0
+#define MX6SL_PAD_ECSPI2_SS0__SD1_CD_B             0x084 0x374 0x828 0x4 0x0
+#define MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15           0x084 0x374 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_SS0__USB_OTG1_PWR         0x084 0x374 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_BDR0__EPDC_BDR0             0x088 0x378 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_BDR0__SD4_CLK               0x088 0x378 0x850 0x1 0x0
+#define MX6SL_PAD_EPDC_BDR0__UART3_RTS_B           0x088 0x378 0x808 0x2 0x2
+#define MX6SL_PAD_EPDC_BDR0__UART3_CTS_B           0x088 0x378 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_BDR0__EIM_ADDR26            0x088 0x378 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_BDR0__SPDC_RL               0x088 0x378 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_BDR0__GPIO2_IO05            0x088 0x378 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_BDR0__EPDC_SDCE7            0x088 0x378 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_BDR1__EPDC_BDR1             0x08c 0x37c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_BDR1__SD4_CMD               0x08c 0x37c 0x858 0x1 0x0
+#define MX6SL_PAD_EPDC_BDR1__UART3_CTS_B           0x08c 0x37c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_BDR1__UART3_RTS_B           0x08c 0x37c 0x808 0x2 0x3
+#define MX6SL_PAD_EPDC_BDR1__EIM_CRE               0x08c 0x37c 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_BDR1__SPDC_UD               0x08c 0x37c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_BDR1__GPIO2_IO06            0x08c 0x37c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_BDR1__EPDC_SDCE8            0x08c 0x37c 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_D0__EPDC_DATA00             0x090 0x380 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D0__ECSPI4_MOSI             0x090 0x380 0x6d8 0x1 0x0
+#define MX6SL_PAD_EPDC_D0__LCD_DATA24              0x090 0x380 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D0__CSI_DATA00              0x090 0x380 0x630 0x3 0x0
+#define MX6SL_PAD_EPDC_D0__SPDC_DATA00             0x090 0x380 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D0__GPIO1_IO07              0x090 0x380 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D1__EPDC_DATA01             0x094 0x384 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D1__ECSPI4_MISO             0x094 0x384 0x6d4 0x1 0x0
+#define MX6SL_PAD_EPDC_D1__LCD_DATA25              0x094 0x384 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D1__CSI_DATA01              0x094 0x384 0x634 0x3 0x0
+#define MX6SL_PAD_EPDC_D1__SPDC_DATA01             0x094 0x384 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D1__GPIO1_IO08              0x094 0x384 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D10__EPDC_DATA10            0x098 0x388 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D10__ECSPI3_SS0             0x098 0x388 0x6c0 0x1 0x1
+#define MX6SL_PAD_EPDC_D10__EPDC_PWR_CTRL2         0x098 0x388 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D10__EIM_ADDR18             0x098 0x388 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D10__SPDC_DATA10            0x098 0x388 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D10__GPIO1_IO17             0x098 0x388 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D10__SD4_WP                 0x098 0x388 0x87c 0x6 0x0
+#define MX6SL_PAD_EPDC_D11__EPDC_DATA11            0x09c 0x38c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D11__ECSPI3_SCLK            0x09c 0x38c 0x6b0 0x1 0x1
+#define MX6SL_PAD_EPDC_D11__EPDC_PWR_CTRL3         0x09c 0x38c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D11__EIM_ADDR19             0x09c 0x38c 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D11__SPDC_DATA11            0x09c 0x38c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D11__GPIO1_IO18             0x09c 0x38c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D11__SD4_CD_B               0x09c 0x38c 0x854 0x6 0x0
+#define MX6SL_PAD_EPDC_D12__EPDC_DATA12            0x0a0 0x390 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D12__UART2_RX_DATA          0x0a0 0x390 0x804 0x1 0x0
+#define MX6SL_PAD_EPDC_D12__UART2_TX_DATA          0x0a0 0x390 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D12__EPDC_PWR_COM           0x0a0 0x390 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D12__EIM_ADDR20             0x0a0 0x390 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D12__SPDC_DATA12            0x0a0 0x390 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D12__GPIO1_IO19             0x0a0 0x390 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D12__ECSPI3_SS1             0x0a0 0x390 0x6c4 0x6 0x1
+#define MX6SL_PAD_EPDC_D13__EPDC_DATA13            0x0a4 0x394 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D13__UART2_TX_DATA          0x0a4 0x394 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D13__UART2_RX_DATA          0x0a4 0x394 0x804 0x1 0x1
+#define MX6SL_PAD_EPDC_D13__EPDC_PWR_IRQ           0x0a4 0x394 0x6e8 0x2 0x0
+#define MX6SL_PAD_EPDC_D13__EIM_ADDR21             0x0a4 0x394 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D13__SPDC_DATA13            0x0a4 0x394 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D13__GPIO1_IO20             0x0a4 0x394 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D13__ECSPI3_SS2             0x0a4 0x394 0x6c8 0x6 0x0
+#define MX6SL_PAD_EPDC_D14__EPDC_DATA14            0x0a8 0x398 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D14__UART2_RTS_B            0x0a8 0x398 0x800 0x1 0x0
+#define MX6SL_PAD_EPDC_D14__UART2_CTS_B            0x0a8 0x398 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D14__EPDC_PWR_STAT          0x0a8 0x398 0x6ec 0x2 0x0
+#define MX6SL_PAD_EPDC_D14__EIM_ADDR22             0x0a8 0x398 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D14__SPDC_DATA14            0x0a8 0x398 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D14__GPIO1_IO21             0x0a8 0x398 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D14__ECSPI3_SS3             0x0a8 0x398 0x6cc 0x6 0x0
+#define MX6SL_PAD_EPDC_D15__EPDC_DATA15            0x0ac 0x39c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D15__UART2_CTS_B            0x0ac 0x39c 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D15__UART2_RTS_B            0x0ac 0x39c 0x800 0x1 0x1
+#define MX6SL_PAD_EPDC_D15__EPDC_PWR_WAKE          0x0ac 0x39c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D15__EIM_ADDR23             0x0ac 0x39c 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D15__SPDC_DATA15            0x0ac 0x39c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D15__GPIO1_IO22             0x0ac 0x39c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D15__ECSPI3_RDY             0x0ac 0x39c 0x6b4 0x6 0x1
+#define MX6SL_PAD_EPDC_D2__EPDC_DATA02             0x0b0 0x3a0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D2__ECSPI4_SS0              0x0b0 0x3a0 0x6dc 0x1 0x0
+#define MX6SL_PAD_EPDC_D2__LCD_DATA26              0x0b0 0x3a0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D2__CSI_DATA02              0x0b0 0x3a0 0x638 0x3 0x0
+#define MX6SL_PAD_EPDC_D2__SPDC_DATA02             0x0b0 0x3a0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D2__GPIO1_IO09              0x0b0 0x3a0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D3__EPDC_DATA03             0x0b4 0x3a4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D3__ECSPI4_SCLK             0x0b4 0x3a4 0x6d0 0x1 0x0
+#define MX6SL_PAD_EPDC_D3__LCD_DATA27              0x0b4 0x3a4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D3__CSI_DATA03              0x0b4 0x3a4 0x63c 0x3 0x0
+#define MX6SL_PAD_EPDC_D3__SPDC_DATA03             0x0b4 0x3a4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D3__GPIO1_IO10              0x0b4 0x3a4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D4__EPDC_DATA04             0x0b8 0x3a8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D4__ECSPI4_SS1              0x0b8 0x3a8 0x6e0 0x1 0x0
+#define MX6SL_PAD_EPDC_D4__LCD_DATA28              0x0b8 0x3a8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D4__CSI_DATA04              0x0b8 0x3a8 0x640 0x3 0x0
+#define MX6SL_PAD_EPDC_D4__SPDC_DATA04             0x0b8 0x3a8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D4__GPIO1_IO11              0x0b8 0x3a8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D5__EPDC_DATA05             0x0bc 0x3ac 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D5__ECSPI4_SS2              0x0bc 0x3ac 0x6e4 0x1 0x0
+#define MX6SL_PAD_EPDC_D5__LCD_DATA29              0x0bc 0x3ac 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D5__CSI_DATA05              0x0bc 0x3ac 0x644 0x3 0x0
+#define MX6SL_PAD_EPDC_D5__SPDC_DATA05             0x0bc 0x3ac 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D5__GPIO1_IO12              0x0bc 0x3ac 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D6__EPDC_DATA06             0x0c0 0x3b0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D6__ECSPI4_SS3              0x0c0 0x3b0 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D6__LCD_DATA30              0x0c0 0x3b0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D6__CSI_DATA06              0x0c0 0x3b0 0x648 0x3 0x0
+#define MX6SL_PAD_EPDC_D6__SPDC_DATA06             0x0c0 0x3b0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D6__GPIO1_IO13              0x0c0 0x3b0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D7__EPDC_DATA07             0x0c4 0x3b4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D7__ECSPI4_RDY              0x0c4 0x3b4 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D7__LCD_DATA31              0x0c4 0x3b4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D7__CSI_DATA07              0x0c4 0x3b4 0x64c 0x3 0x0
+#define MX6SL_PAD_EPDC_D7__SPDC_DATA07             0x0c4 0x3b4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D7__GPIO1_IO14              0x0c4 0x3b4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D8__EPDC_DATA08             0x0c8 0x3b8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D8__ECSPI3_MOSI             0x0c8 0x3b8 0x6bc 0x1 0x1
+#define MX6SL_PAD_EPDC_D8__EPDC_PWR_CTRL0          0x0c8 0x3b8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D8__EIM_ADDR16              0x0c8 0x3b8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D8__SPDC_DATA08             0x0c8 0x3b8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D8__GPIO1_IO15              0x0c8 0x3b8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D8__SD4_RESET               0x0c8 0x3b8 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_D9__EPDC_DATA09             0x0cc 0x3bc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D9__ECSPI3_MISO             0x0cc 0x3bc 0x6b8 0x1 0x1
+#define MX6SL_PAD_EPDC_D9__EPDC_PWR_CTRL1          0x0cc 0x3bc 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D9__EIM_ADDR17              0x0cc 0x3bc 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D9__SPDC_DATA09             0x0cc 0x3bc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D9__GPIO1_IO16              0x0cc 0x3bc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D9__SD4_VSELECT             0x0cc 0x3bc 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_GDCLK__EPDC_GDCLK           0x0d0 0x3c0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDCLK__ECSPI2_SS2           0x0d0 0x3c0 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKR            0x0d0 0x3c0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDCLK__CSI_PIXCLK           0x0d0 0x3c0 0x674 0x3 0x1
+#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKL            0x0d0 0x3c0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDCLK__GPIO1_IO31           0x0d0 0x3c0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDCLK__SD2_RESET            0x0d0 0x3c0 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_GDOE__EPDC_GDOE             0x0d4 0x3c4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDOE__ECSPI2_SS3            0x0d4 0x3c4 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDOE__SPDC_YOER             0x0d4 0x3c4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDOE__CSI_HSYNC             0x0d4 0x3c4 0x670 0x3 0x1
+#define MX6SL_PAD_EPDC_GDOE__SPDC_YOEL             0x0d4 0x3c4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDOE__GPIO2_IO00            0x0d4 0x3c4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDOE__SD2_VSELECT           0x0d4 0x3c4 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_GDRL__EPDC_GDRL             0x0d8 0x3c8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDRL__ECSPI2_RDY            0x0d8 0x3c8 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUR           0x0d8 0x3c8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDRL__CSI_MCLK              0x0d8 0x3c8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUL           0x0d8 0x3c8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDRL__GPIO2_IO01            0x0d8 0x3c8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDRL__SD2_WP                0x0d8 0x3c8 0x834 0x6 0x1
+#define MX6SL_PAD_EPDC_GDSP__EPDC_GDSP             0x0dc 0x3cc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDSP__PWM4_OUT              0x0dc 0x3cc 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODR           0x0dc 0x3cc 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDSP__CSI_VSYNC             0x0dc 0x3cc 0x678 0x3 0x1
+#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODL           0x0dc 0x3cc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDSP__GPIO2_IO02            0x0dc 0x3cc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDSP__SD2_CD_B              0x0dc 0x3cc 0x830 0x6 0x1
+#define MX6SL_PAD_EPDC_PWRCOM__EPDC_PWR_COM        0x0e0 0x3d0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__SD4_DATA0           0x0e0 0x3d0 0x85c 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__LCD_DATA20          0x0e0 0x3d0 0x7c8 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__EIM_BCLK            0x0e0 0x3d0 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID         0x0e0 0x3d0 0x5dc 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__GPIO2_IO11          0x0e0 0x3d0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__SD3_RESET           0x0e0 0x3d0 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__EPDC_PWR_CTRL0    0x0e4 0x3d4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__AUD5_RXC          0x0e4 0x3d4 0x604 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__LCD_DATA16        0x0e4 0x3d4 0x7b8 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__EIM_RW            0x0e4 0x3d4 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__SPDC_YCKL         0x0e4 0x3d4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07        0x0e4 0x3d4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__SD4_RESET         0x0e4 0x3d4 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__EPDC_PWR_CTRL1    0x0e8 0x3d8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__AUD5_TXFS         0x0e8 0x3d8 0x610 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__LCD_DATA17        0x0e8 0x3d8 0x7bc 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__EIM_OE_B          0x0e8 0x3d8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__SPDC_YOEL         0x0e8 0x3d8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08        0x0e8 0x3d8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__SD4_VSELECT       0x0e8 0x3d8 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__EPDC_PWR_CTRL2    0x0ec 0x3dc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__AUD5_TXD          0x0ec 0x3dc 0x600 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__LCD_DATA18        0x0ec 0x3dc 0x7c0 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__EIM_CS0_B         0x0ec 0x3dc 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__SPDC_YDIOUL       0x0ec 0x3dc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09        0x0ec 0x3dc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__SD4_WP            0x0ec 0x3dc 0x87c 0x6 0x1
+#define MX6SL_PAD_EPDC_PWRCTRL3__EPDC_PWR_CTRL3    0x0f0 0x3e0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__AUD5_TXC          0x0f0 0x3e0 0x60c 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__LCD_DATA19        0x0f0 0x3e0 0x7c4 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__EIM_CS1_B         0x0f0 0x3e0 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__SPDC_YDIODL       0x0f0 0x3e0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10        0x0f0 0x3e0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__SD4_CD_B          0x0f0 0x3e0 0x854 0x6 0x1
+#define MX6SL_PAD_EPDC_PWRINT__EPDC_PWR_IRQ        0x0f4 0x3e4 0x6e8 0x0 0x1
+#define MX6SL_PAD_EPDC_PWRINT__SD4_DATA1           0x0f4 0x3e4 0x860 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRINT__LCD_DATA21          0x0f4 0x3e4 0x7cc 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRINT__EIM_ACLK_FREERUN    0x0f4 0x3e4 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRINT__USB_OTG2_ID         0x0f4 0x3e4 0x5e0 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12          0x0f4 0x3e4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRINT__SD3_VSELECT         0x0f4 0x3e4 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__EPDC_PWR_STAT      0x0f8 0x3e8 0x6ec 0x0 0x1
+#define MX6SL_PAD_EPDC_PWRSTAT__SD4_DATA2          0x0f8 0x3e8 0x864 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__LCD_DATA22         0x0f8 0x3e8 0x7d0 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__EIM_WAIT_B         0x0f8 0x3e8 0x884 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__ARM_EVENTI         0x0f8 0x3e8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13         0x0f8 0x3e8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__SD3_WP             0x0f8 0x3e8 0x84c 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__EPDC_PWR_WAKE    0x0fc 0x3ec 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__SD4_DATA3        0x0fc 0x3ec 0x868 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__LCD_DATA23       0x0fc 0x3ec 0x7d4 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__EIM_DTACK_B      0x0fc 0x3ec 0x880 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__ARM_EVENTO       0x0fc 0x3ec 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14       0x0fc 0x3ec 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__SD3_CD_B         0x0fc 0x3ec 0x838 0x6 0x0
+#define MX6SL_PAD_EPDC_SDCE0__EPDC_SDCE0           0x100 0x3f0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE0__ECSPI2_SS1           0x100 0x3f0 0x6ac 0x1 0x0
+#define MX6SL_PAD_EPDC_SDCE0__PWM3_OUT             0x100 0x3f0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE0__EIM_CS2_B            0x100 0x3f0 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE0__SPDC_YCKR            0x100 0x3f0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE0__GPIO1_IO27           0x100 0x3f0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCE1__EPDC_SDCE1           0x104 0x3f4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE1__WDOG2_B              0x104 0x3f4 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_SDCE1__PWM4_OUT             0x104 0x3f4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE1__EIM_LBA_B            0x104 0x3f4 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE1__SPDC_YOER            0x104 0x3f4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE1__GPIO1_IO28           0x104 0x3f4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCE2__EPDC_SDCE2           0x108 0x3f8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE2__I2C3_SCL             0x108 0x3f8 0x72c 0x1 0x1
+#define MX6SL_PAD_EPDC_SDCE2__PWM1_OUT             0x108 0x3f8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE2__EIM_EB0_B            0x108 0x3f8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE2__SPDC_YDIOUR          0x108 0x3f8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29           0x108 0x3f8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCE3__EPDC_SDCE3           0x10c 0x3fc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE3__I2C3_SDA             0x10c 0x3fc 0x730 0x1 0x1
+#define MX6SL_PAD_EPDC_SDCE3__PWM2_OUT             0x10c 0x3fc 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE3__EIM_EB1_B            0x10c 0x3fc 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE3__SPDC_YDIODR          0x10c 0x3fc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE3__GPIO1_IO30           0x10c 0x3fc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCLK__EPDC_SDCLK_P         0x110 0x400 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCLK__ECSPI2_MOSI          0x110 0x400 0x6a4 0x1 0x1
+#define MX6SL_PAD_EPDC_SDCLK__I2C2_SCL             0x110 0x400 0x724 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCLK__CSI_DATA08           0x110 0x400 0x650 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCLK__SPDC_CL              0x110 0x400 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCLK__GPIO1_IO23           0x110 0x400 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDLE__EPDC_SDLE             0x114 0x404 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDLE__ECSPI2_MISO           0x114 0x404 0x6a0 0x1 0x1
+#define MX6SL_PAD_EPDC_SDLE__I2C2_SDA              0x114 0x404 0x728 0x2 0x0
+#define MX6SL_PAD_EPDC_SDLE__CSI_DATA09            0x114 0x404 0x654 0x3 0x0
+#define MX6SL_PAD_EPDC_SDLE__SPDC_LD               0x114 0x404 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDLE__GPIO1_IO24            0x114 0x404 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDOE__EPDC_SDOE             0x118 0x408 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDOE__ECSPI2_SS0            0x118 0x408 0x6a8 0x1 0x1
+#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOR            0x118 0x408 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDOE__CSI_DATA10            0x118 0x408 0x658 0x3 0x0
+#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOL            0x118 0x408 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDOE__GPIO1_IO25            0x118 0x408 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDSHR           0x11c 0x40c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDSHR__ECSPI2_SCLK          0x11c 0x40c 0x69c 0x1 0x1
+#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDCE4           0x11c 0x40c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDSHR__CSI_DATA11           0x11c 0x40c 0x65c 0x3 0x0
+#define MX6SL_PAD_EPDC_SDSHR__SPDC_XDIOR           0x11c 0x40c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDSHR__GPIO1_IO26           0x11c 0x40c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_VCOM0__EPDC_VCOM0           0x120 0x410 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_VCOM0__AUD5_RXFS            0x120 0x410 0x608 0x1 0x0
+#define MX6SL_PAD_EPDC_VCOM0__UART3_RX_DATA        0x120 0x410 0x80c 0x2 0x4
+#define MX6SL_PAD_EPDC_VCOM0__UART3_TX_DATA        0x120 0x410 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_VCOM0__EIM_ADDR24           0x120 0x410 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_VCOM0__SPDC_VCOM0           0x120 0x410 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03           0x120 0x410 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_VCOM0__EPDC_SDCE5           0x120 0x410 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_VCOM1__EPDC_VCOM1           0x124 0x414 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_VCOM1__AUD5_RXD             0x124 0x414 0x5fc 0x1 0x0
+#define MX6SL_PAD_EPDC_VCOM1__UART3_TX_DATA        0x124 0x414 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_VCOM1__UART3_RX_DATA        0x124 0x414 0x80c 0x2 0x5
+#define MX6SL_PAD_EPDC_VCOM1__EIM_ADDR25           0x124 0x414 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_VCOM1__SPDC_VCOM1           0x124 0x414 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_VCOM1__GPIO2_IO04           0x124 0x414 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_VCOM1__EPDC_SDCE6           0x124 0x414 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV            0x128 0x418 0x704 0x0 0x1
+#define MX6SL_PAD_FEC_CRS_DV__SD4_DATA1            0x128 0x418 0x860 0x1 0x1
+#define MX6SL_PAD_FEC_CRS_DV__AUD6_TXC             0x128 0x418 0x624 0x2 0x0
+#define MX6SL_PAD_FEC_CRS_DV__ECSPI4_MISO          0x128 0x418 0x6d4 0x3 0x1
+#define MX6SL_PAD_FEC_CRS_DV__GPT_COMPARE2         0x128 0x418 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25           0x128 0x418 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_CRS_DV__ARM_TRACE31          0x128 0x418 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_MDC__FEC_MDC                 0x12c 0x41c 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_MDC__SD4_DATA4               0x12c 0x41c 0x86c 0x1 0x0
+#define MX6SL_PAD_FEC_MDC__AUDIO_CLK_OUT           0x12c 0x41c 0x000 0x2 0x0
+#define MX6SL_PAD_FEC_MDC__SD1_RESET               0x12c 0x41c 0x000 0x3 0x0
+#define MX6SL_PAD_FEC_MDC__SD3_RESET               0x12c 0x41c 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_MDC__GPIO4_IO23              0x12c 0x41c 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_MDC__ARM_TRACE29             0x12c 0x41c 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_MDIO__FEC_MDIO               0x130 0x420 0x6f4 0x0 0x1
+#define MX6SL_PAD_FEC_MDIO__SD4_CLK                0x130 0x420 0x850 0x1 0x1
+#define MX6SL_PAD_FEC_MDIO__AUD6_RXFS              0x130 0x420 0x620 0x2 0x0
+#define MX6SL_PAD_FEC_MDIO__ECSPI4_SS0             0x130 0x420 0x6dc 0x3 0x1
+#define MX6SL_PAD_FEC_MDIO__GPT_CAPTURE1           0x130 0x420 0x710 0x4 0x0
+#define MX6SL_PAD_FEC_MDIO__GPIO4_IO20             0x130 0x420 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_MDIO__ARM_TRACE26            0x130 0x420 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT         0x134 0x424 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_REF_CLK__SD4_RESET           0x134 0x424 0x000 0x1 0x0
+#define MX6SL_PAD_FEC_REF_CLK__WDOG1_B             0x134 0x424 0x000 0x2 0x0
+#define MX6SL_PAD_FEC_REF_CLK__PWM4_OUT            0x134 0x424 0x000 0x3 0x0
+#define MX6SL_PAD_FEC_REF_CLK__CCM_PMIC_READY      0x134 0x424 0x62c 0x4 0x0
+#define MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26          0x134 0x424 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_REF_CLK__SPDIF_EXT_CLK       0x134 0x424 0x7f4 0x6 0x2
+#define MX6SL_PAD_FEC_RX_ER__FEC_RX_ER             0x138 0x428 0x708 0x0 0x1
+#define MX6SL_PAD_FEC_RX_ER__SD4_DATA0             0x138 0x428 0x85c 0x1 0x1
+#define MX6SL_PAD_FEC_RX_ER__AUD6_RXD              0x138 0x428 0x614 0x2 0x0
+#define MX6SL_PAD_FEC_RX_ER__ECSPI4_MOSI           0x138 0x428 0x6d8 0x3 0x1
+#define MX6SL_PAD_FEC_RX_ER__GPT_COMPARE1          0x138 0x428 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_RX_ER__GPIO4_IO19            0x138 0x428 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_RX_ER__ARM_TRACE25           0x138 0x428 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0           0x13c 0x42c 0x6f8 0x0 0x0
+#define MX6SL_PAD_FEC_RXD0__SD4_DATA5              0x13c 0x42c 0x870 0x1 0x0
+#define MX6SL_PAD_FEC_RXD0__USB_OTG1_ID            0x13c 0x42c 0x5dc 0x2 0x1
+#define MX6SL_PAD_FEC_RXD0__SD1_VSELECT            0x13c 0x42c 0x000 0x3 0x0
+#define MX6SL_PAD_FEC_RXD0__SD3_VSELECT            0x13c 0x42c 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_RXD0__GPIO4_IO17             0x13c 0x42c 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_RXD0__ARM_TRACE24            0x13c 0x42c 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1           0x140 0x430 0x6fc 0x0 0x1
+#define MX6SL_PAD_FEC_RXD1__SD4_DATA2              0x140 0x430 0x864 0x1 0x1
+#define MX6SL_PAD_FEC_RXD1__AUD6_TXFS              0x140 0x430 0x628 0x2 0x0
+#define MX6SL_PAD_FEC_RXD1__ECSPI4_SS1             0x140 0x430 0x6e0 0x3 0x1
+#define MX6SL_PAD_FEC_RXD1__GPT_COMPARE3           0x140 0x430 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_RXD1__GPIO4_IO18             0x140 0x430 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_RXD1__FEC_COL                0x140 0x430 0x6f0 0x6 0x0
+#define MX6SL_PAD_FEC_TX_CLK__FEC_TX_CLK           0x144 0x434 0x70c 0x0 0x1
+#define MX6SL_PAD_FEC_TX_CLK__SD4_CMD              0x144 0x434 0x858 0x1 0x1
+#define MX6SL_PAD_FEC_TX_CLK__AUD6_RXC             0x144 0x434 0x61c 0x2 0x0
+#define MX6SL_PAD_FEC_TX_CLK__ECSPI4_SCLK          0x144 0x434 0x6d0 0x3 0x1
+#define MX6SL_PAD_FEC_TX_CLK__GPT_CAPTURE2         0x144 0x434 0x714 0x4 0x0
+#define MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21           0x144 0x434 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TX_CLK__ARM_TRACE27          0x144 0x434 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_TX_EN__FEC_TX_EN             0x148 0x438 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_TX_EN__SD4_DATA6             0x148 0x438 0x874 0x1 0x0
+#define MX6SL_PAD_FEC_TX_EN__SPDIF_IN              0x148 0x438 0x7f0 0x2 0x0
+#define MX6SL_PAD_FEC_TX_EN__SD1_WP                0x148 0x438 0x82c 0x3 0x1
+#define MX6SL_PAD_FEC_TX_EN__SD3_WP                0x148 0x438 0x84c 0x4 0x1
+#define MX6SL_PAD_FEC_TX_EN__GPIO4_IO22            0x148 0x438 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TX_EN__ARM_TRACE28           0x148 0x438 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0           0x14c 0x43c 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_TXD0__SD4_DATA3              0x14c 0x43c 0x868 0x1 0x1
+#define MX6SL_PAD_FEC_TXD0__AUD6_TXD               0x14c 0x43c 0x618 0x2 0x0
+#define MX6SL_PAD_FEC_TXD0__ECSPI4_SS2             0x14c 0x43c 0x6e4 0x3 0x1
+#define MX6SL_PAD_FEC_TXD0__GPT_CLKIN              0x14c 0x43c 0x718 0x4 0x0
+#define MX6SL_PAD_FEC_TXD0__GPIO4_IO24             0x14c 0x43c 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TXD0__ARM_TRACE30            0x14c 0x43c 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1           0x150 0x440 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_TXD1__SD4_DATA7              0x150 0x440 0x878 0x1 0x0
+#define MX6SL_PAD_FEC_TXD1__SPDIF_OUT              0x150 0x440 0x000 0x2 0x0
+#define MX6SL_PAD_FEC_TXD1__SD1_CD_B               0x150 0x440 0x828 0x3 0x1
+#define MX6SL_PAD_FEC_TXD1__SD3_CD_B               0x150 0x440 0x838 0x4 0x1
+#define MX6SL_PAD_FEC_TXD1__GPIO4_IO16             0x150 0x440 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TXD1__FEC_RX_CLK             0x150 0x440 0x700 0x6 0x0
+#define MX6SL_PAD_HSIC_DAT__USB_H_DATA             0x154 0x444 0x000 0x0 0x0
+#define MX6SL_PAD_HSIC_DAT__I2C1_SCL               0x154 0x444 0x71c 0x1 0x1
+#define MX6SL_PAD_HSIC_DAT__PWM1_OUT               0x154 0x444 0x000 0x2 0x0
+#define MX6SL_PAD_HSIC_DAT__XTALOSC_REF_CLK_24M    0x154 0x444 0x000 0x3 0x0
+#define MX6SL_PAD_HSIC_DAT__GPIO3_IO19             0x154 0x444 0x000 0x5 0x0
+#define MX6SL_PAD_HSIC_STROBE__USB_H_STROBE        0x158 0x448 0x000 0x0 0x0
+#define MX6SL_PAD_HSIC_STROBE__I2C1_SDA            0x158 0x448 0x720 0x1 0x1
+#define MX6SL_PAD_HSIC_STROBE__PWM2_OUT            0x158 0x448 0x000 0x2 0x0
+#define MX6SL_PAD_HSIC_STROBE__XTALOSC_REF_CLK_32K 0x158 0x448 0x000 0x3 0x0
+#define MX6SL_PAD_HSIC_STROBE__GPIO3_IO20          0x158 0x448 0x000 0x5 0x0
+#define MX6SL_PAD_I2C1_SCL__I2C1_SCL               0x15c 0x44c 0x71c 0x0 0x2
+#define MX6SL_PAD_I2C1_SCL__UART1_RTS_B            0x15c 0x44c 0x7f8 0x1 0x0
+#define MX6SL_PAD_I2C1_SCL__UART1_CTS_B            0x15c 0x44c 0x000 0x1 0x0
+#define MX6SL_PAD_I2C1_SCL__ECSPI3_SS2             0x15c 0x44c 0x6c8 0x2 0x1
+#define MX6SL_PAD_I2C1_SCL__FEC_RX_DATA0           0x15c 0x44c 0x6f8 0x3 0x1
+#define MX6SL_PAD_I2C1_SCL__SD3_RESET              0x15c 0x44c 0x000 0x4 0x0
+#define MX6SL_PAD_I2C1_SCL__GPIO3_IO12             0x15c 0x44c 0x000 0x5 0x0
+#define MX6SL_PAD_I2C1_SCL__ECSPI1_SS1             0x15c 0x44c 0x690 0x6 0x0
+#define MX6SL_PAD_I2C1_SDA__I2C1_SDA               0x160 0x450 0x720 0x0 0x2
+#define MX6SL_PAD_I2C1_SDA__UART1_CTS_B            0x160 0x450 0x000 0x1 0x0
+#define MX6SL_PAD_I2C1_SDA__UART1_RTS_B            0x160 0x450 0x7f8 0x1 0x1
+#define MX6SL_PAD_I2C1_SDA__ECSPI3_SS3             0x160 0x450 0x6cc 0x2 0x1
+#define MX6SL_PAD_I2C1_SDA__FEC_TX_EN              0x160 0x450 0x000 0x3 0x0
+#define MX6SL_PAD_I2C1_SDA__SD3_VSELECT            0x160 0x450 0x000 0x4 0x0
+#define MX6SL_PAD_I2C1_SDA__GPIO3_IO13             0x160 0x450 0x000 0x5 0x0
+#define MX6SL_PAD_I2C1_SDA__ECSPI1_SS2             0x160 0x450 0x694 0x6 0x0
+#define MX6SL_PAD_I2C2_SCL__I2C2_SCL               0x164 0x454 0x724 0x0 0x1
+#define MX6SL_PAD_I2C2_SCL__AUD4_RXFS              0x164 0x454 0x5f0 0x1 0x0
+#define MX6SL_PAD_I2C2_SCL__SPDIF_IN               0x164 0x454 0x7f0 0x2 0x1
+#define MX6SL_PAD_I2C2_SCL__FEC_TX_DATA1           0x164 0x454 0x000 0x3 0x0
+#define MX6SL_PAD_I2C2_SCL__SD3_WP                 0x164 0x454 0x84c 0x4 0x2
+#define MX6SL_PAD_I2C2_SCL__GPIO3_IO14             0x164 0x454 0x000 0x5 0x0
+#define MX6SL_PAD_I2C2_SCL__ECSPI1_RDY             0x164 0x454 0x680 0x6 0x0
+#define MX6SL_PAD_I2C2_SDA__I2C2_SDA               0x168 0x458 0x728 0x0 0x1
+#define MX6SL_PAD_I2C2_SDA__AUD4_RXC               0x168 0x458 0x5ec 0x1 0x0
+#define MX6SL_PAD_I2C2_SDA__SPDIF_OUT              0x168 0x458 0x000 0x2 0x0
+#define MX6SL_PAD_I2C2_SDA__FEC_REF_OUT            0x168 0x458 0x000 0x3 0x0
+#define MX6SL_PAD_I2C2_SDA__SD3_CD_B               0x168 0x458 0x838 0x4 0x2
+#define MX6SL_PAD_I2C2_SDA__GPIO3_IO15             0x168 0x458 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL0__KEY_COL0               0x16c 0x474 0x734 0x0 0x0
+#define MX6SL_PAD_KEY_COL0__I2C2_SCL               0x16c 0x474 0x724 0x1 0x2
+#define MX6SL_PAD_KEY_COL0__LCD_DATA00             0x16c 0x474 0x778 0x2 0x0
+#define MX6SL_PAD_KEY_COL0__EIM_AD00               0x16c 0x474 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL0__SD1_CD_B               0x16c 0x474 0x828 0x4 0x2
+#define MX6SL_PAD_KEY_COL0__GPIO3_IO24             0x16c 0x474 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL1__KEY_COL1               0x170 0x478 0x738 0x0 0x0
+#define MX6SL_PAD_KEY_COL1__ECSPI4_MOSI            0x170 0x478 0x6d8 0x1 0x2
+#define MX6SL_PAD_KEY_COL1__LCD_DATA02             0x170 0x478 0x780 0x2 0x0
+#define MX6SL_PAD_KEY_COL1__EIM_AD02               0x170 0x478 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL1__SD3_DATA4              0x170 0x478 0x83c 0x4 0x0
+#define MX6SL_PAD_KEY_COL1__GPIO3_IO26             0x170 0x478 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL2__KEY_COL2               0x174 0x47c 0x73c 0x0 0x0
+#define MX6SL_PAD_KEY_COL2__ECSPI4_SS0             0x174 0x47c 0x6dc 0x1 0x2
+#define MX6SL_PAD_KEY_COL2__LCD_DATA04             0x174 0x47c 0x788 0x2 0x0
+#define MX6SL_PAD_KEY_COL2__EIM_AD04               0x174 0x47c 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL2__SD3_DATA6              0x174 0x47c 0x844 0x4 0x0
+#define MX6SL_PAD_KEY_COL2__GPIO3_IO28             0x174 0x47c 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL3__KEY_COL3               0x178 0x480 0x740 0x0 0x0
+#define MX6SL_PAD_KEY_COL3__AUD6_RXFS              0x178 0x480 0x620 0x1 0x1
+#define MX6SL_PAD_KEY_COL3__LCD_DATA06             0x178 0x480 0x790 0x2 0x0
+#define MX6SL_PAD_KEY_COL3__EIM_AD06               0x178 0x480 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL3__SD4_DATA6              0x178 0x480 0x874 0x4 0x1
+#define MX6SL_PAD_KEY_COL3__GPIO3_IO30             0x178 0x480 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL3__SD1_RESET              0x178 0x480 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL4__KEY_COL4               0x17c 0x484 0x744 0x0 0x0
+#define MX6SL_PAD_KEY_COL4__AUD6_RXD               0x17c 0x484 0x614 0x1 0x1
+#define MX6SL_PAD_KEY_COL4__LCD_DATA08             0x17c 0x484 0x798 0x2 0x0
+#define MX6SL_PAD_KEY_COL4__EIM_AD08               0x17c 0x484 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL4__SD4_CLK                0x17c 0x484 0x850 0x4 0x2
+#define MX6SL_PAD_KEY_COL4__GPIO4_IO00             0x17c 0x484 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL4__USB_OTG1_PWR           0x17c 0x484 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL5__KEY_COL5               0x180 0x488 0x748 0x0 0x0
+#define MX6SL_PAD_KEY_COL5__AUD6_TXFS              0x180 0x488 0x628 0x1 0x1
+#define MX6SL_PAD_KEY_COL5__LCD_DATA10             0x180 0x488 0x7a0 0x2 0x0
+#define MX6SL_PAD_KEY_COL5__EIM_AD10               0x180 0x488 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL5__SD4_DATA0              0x180 0x488 0x85c 0x4 0x2
+#define MX6SL_PAD_KEY_COL5__GPIO4_IO02             0x180 0x488 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL5__USB_OTG2_PWR           0x180 0x488 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL6__KEY_COL6               0x184 0x48c 0x74c 0x0 0x0
+#define MX6SL_PAD_KEY_COL6__UART4_RX_DATA          0x184 0x48c 0x814 0x1 0x2
+#define MX6SL_PAD_KEY_COL6__UART4_TX_DATA          0x184 0x48c 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_COL6__LCD_DATA12             0x184 0x48c 0x7a8 0x2 0x0
+#define MX6SL_PAD_KEY_COL6__EIM_AD12               0x184 0x48c 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL6__SD4_DATA2              0x184 0x48c 0x864 0x4 0x2
+#define MX6SL_PAD_KEY_COL6__GPIO4_IO04             0x184 0x48c 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL6__SD3_RESET              0x184 0x48c 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL7__KEY_COL7               0x188 0x490 0x750 0x0 0x0
+#define MX6SL_PAD_KEY_COL7__UART4_RTS_B            0x188 0x490 0x810 0x1 0x2
+#define MX6SL_PAD_KEY_COL7__UART4_CTS_B            0x188 0x490 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_COL7__LCD_DATA14             0x188 0x490 0x7b0 0x2 0x0
+#define MX6SL_PAD_KEY_COL7__EIM_AD14               0x188 0x490 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL7__SD4_DATA4              0x188 0x490 0x86c 0x4 0x1
+#define MX6SL_PAD_KEY_COL7__GPIO4_IO06             0x188 0x490 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL7__SD1_WP                 0x188 0x490 0x82c 0x6 0x2
+#define MX6SL_PAD_KEY_ROW0__KEY_ROW0               0x18c 0x494 0x754 0x0 0x0
+#define MX6SL_PAD_KEY_ROW0__I2C2_SDA               0x18c 0x494 0x728 0x1 0x2
+#define MX6SL_PAD_KEY_ROW0__LCD_DATA01             0x18c 0x494 0x77c 0x2 0x0
+#define MX6SL_PAD_KEY_ROW0__EIM_AD01               0x18c 0x494 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW0__SD1_WP                 0x18c 0x494 0x82c 0x4 0x3
+#define MX6SL_PAD_KEY_ROW0__GPIO3_IO25             0x18c 0x494 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW1__KEY_ROW1               0x190 0x498 0x758 0x0 0x0
+#define MX6SL_PAD_KEY_ROW1__ECSPI4_MISO            0x190 0x498 0x6d4 0x1 0x2
+#define MX6SL_PAD_KEY_ROW1__LCD_DATA03             0x190 0x498 0x784 0x2 0x0
+#define MX6SL_PAD_KEY_ROW1__EIM_AD03               0x190 0x498 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW1__SD3_DATA5              0x190 0x498 0x840 0x4 0x0
+#define MX6SL_PAD_KEY_ROW1__GPIO3_IO27             0x190 0x498 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW2__KEY_ROW2               0x194 0x49c 0x75c 0x0 0x0
+#define MX6SL_PAD_KEY_ROW2__ECSPI4_SCLK            0x194 0x49c 0x6d0 0x1 0x2
+#define MX6SL_PAD_KEY_ROW2__LCD_DATA05             0x194 0x49c 0x78c 0x2 0x0
+#define MX6SL_PAD_KEY_ROW2__EIM_AD05               0x194 0x49c 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW2__SD3_DATA7              0x194 0x49c 0x848 0x4 0x0
+#define MX6SL_PAD_KEY_ROW2__GPIO3_IO29             0x194 0x49c 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW3__KEY_ROW3               0x198 0x4a0 0x760 0x0 0x0
+#define MX6SL_PAD_KEY_ROW3__AUD6_RXC               0x198 0x4a0 0x61c 0x1 0x1
+#define MX6SL_PAD_KEY_ROW3__LCD_DATA07             0x198 0x4a0 0x794 0x2 0x0
+#define MX6SL_PAD_KEY_ROW3__EIM_AD07               0x198 0x4a0 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW3__SD4_DATA7              0x198 0x4a0 0x878 0x4 0x1
+#define MX6SL_PAD_KEY_ROW3__GPIO3_IO31             0x198 0x4a0 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW3__SD1_VSELECT            0x198 0x4a0 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_ROW4__KEY_ROW4               0x19c 0x4a4 0x764 0x0 0x0
+#define MX6SL_PAD_KEY_ROW4__AUD6_TXC               0x19c 0x4a4 0x624 0x1 0x1
+#define MX6SL_PAD_KEY_ROW4__LCD_DATA09             0x19c 0x4a4 0x79c 0x2 0x0
+#define MX6SL_PAD_KEY_ROW4__EIM_AD09               0x19c 0x4a4 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW4__SD4_CMD                0x19c 0x4a4 0x858 0x4 0x2
+#define MX6SL_PAD_KEY_ROW4__GPIO4_IO01             0x19c 0x4a4 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW4__USB_OTG1_OC            0x19c 0x4a4 0x824 0x6 0x1
+#define MX6SL_PAD_KEY_ROW5__KEY_ROW5               0x1a0 0x4a8 0x768 0x0 0x0
+#define MX6SL_PAD_KEY_ROW5__AUD6_TXD               0x1a0 0x4a8 0x618 0x1 0x1
+#define MX6SL_PAD_KEY_ROW5__LCD_DATA11             0x1a0 0x4a8 0x7a4 0x2 0x0
+#define MX6SL_PAD_KEY_ROW5__EIM_AD11               0x1a0 0x4a8 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW5__SD4_DATA1              0x1a0 0x4a8 0x860 0x4 0x2
+#define MX6SL_PAD_KEY_ROW5__GPIO4_IO03             0x1a0 0x4a8 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW5__USB_OTG2_OC            0x1a0 0x4a8 0x820 0x6 0x2
+#define MX6SL_PAD_KEY_ROW6__KEY_ROW6               0x1a4 0x4ac 0x76c 0x0 0x0
+#define MX6SL_PAD_KEY_ROW6__UART4_TX_DATA          0x1a4 0x4ac 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_ROW6__UART4_RX_DATA          0x1a4 0x4ac 0x814 0x1 0x3
+#define MX6SL_PAD_KEY_ROW6__LCD_DATA13             0x1a4 0x4ac 0x7ac 0x2 0x0
+#define MX6SL_PAD_KEY_ROW6__EIM_AD13               0x1a4 0x4ac 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW6__SD4_DATA3              0x1a4 0x4ac 0x868 0x4 0x2
+#define MX6SL_PAD_KEY_ROW6__GPIO4_IO05             0x1a4 0x4ac 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW6__SD3_VSELECT            0x1a4 0x4ac 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_ROW7__KEY_ROW7               0x1a8 0x4b0 0x770 0x0 0x0
+#define MX6SL_PAD_KEY_ROW7__UART4_CTS_B            0x1a8 0x4b0 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_ROW7__UART4_RTS_B            0x1a8 0x4b0 0x810 0x1 0x3
+#define MX6SL_PAD_KEY_ROW7__LCD_DATA15             0x1a8 0x4b0 0x7b4 0x2 0x0
+#define MX6SL_PAD_KEY_ROW7__EIM_AD15               0x1a8 0x4b0 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW7__SD4_DATA5              0x1a8 0x4b0 0x870 0x4 0x1
+#define MX6SL_PAD_KEY_ROW7__GPIO4_IO07             0x1a8 0x4b0 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW7__SD1_CD_B               0x1a8 0x4b0 0x828 0x6 0x3
+#define MX6SL_PAD_LCD_CLK__LCD_CLK                 0x1ac 0x4b4 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_CLK__SD4_DATA4               0x1ac 0x4b4 0x86c 0x1 0x2
+#define MX6SL_PAD_LCD_CLK__LCD_WR_RWN              0x1ac 0x4b4 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_CLK__EIM_RW                  0x1ac 0x4b4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_CLK__PWM4_OUT                0x1ac 0x4b4 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_CLK__GPIO2_IO15              0x1ac 0x4b4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT0__LCD_DATA00             0x1b0 0x4b8 0x778 0x0 0x1
+#define MX6SL_PAD_LCD_DAT0__ECSPI1_MOSI            0x1b0 0x4b8 0x688 0x1 0x1
+#define MX6SL_PAD_LCD_DAT0__USB_OTG2_ID            0x1b0 0x4b8 0x5e0 0x2 0x1
+#define MX6SL_PAD_LCD_DAT0__PWM1_OUT               0x1b0 0x4b8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT0__UART5_DTR_B            0x1b0 0x4b8 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT0__GPIO2_IO20             0x1b0 0x4b8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT0__ARM_TRACE00            0x1b0 0x4b8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT0__SRC_BOOT_CFG00         0x1b0 0x4b8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT1__LCD_DATA01             0x1b4 0x4bc 0x77c 0x0 0x1
+#define MX6SL_PAD_LCD_DAT1__ECSPI1_MISO            0x1b4 0x4bc 0x684 0x1 0x1
+#define MX6SL_PAD_LCD_DAT1__USB_OTG1_ID            0x1b4 0x4bc 0x5dc 0x2 0x2
+#define MX6SL_PAD_LCD_DAT1__PWM2_OUT               0x1b4 0x4bc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT1__AUD4_RXFS              0x1b4 0x4bc 0x5f0 0x4 0x1
+#define MX6SL_PAD_LCD_DAT1__GPIO2_IO21             0x1b4 0x4bc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT1__ARM_TRACE01            0x1b4 0x4bc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT1__SRC_BOOT_CFG01         0x1b4 0x4bc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT10__LCD_DATA10            0x1b8 0x4c0 0x7a0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT10__KEY_COL1              0x1b8 0x4c0 0x738 0x1 0x1
+#define MX6SL_PAD_LCD_DAT10__CSI_DATA07            0x1b8 0x4c0 0x64c 0x2 0x1
+#define MX6SL_PAD_LCD_DAT10__EIM_DATA04            0x1b8 0x4c0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT10__ECSPI2_MISO           0x1b8 0x4c0 0x6a0 0x4 0x2
+#define MX6SL_PAD_LCD_DAT10__GPIO2_IO30            0x1b8 0x4c0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT10__ARM_TRACE10           0x1b8 0x4c0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT10__SRC_BOOT_CFG10        0x1b8 0x4c0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT11__LCD_DATA11            0x1bc 0x4c4 0x7a4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT11__KEY_ROW1              0x1bc 0x4c4 0x758 0x1 0x1
+#define MX6SL_PAD_LCD_DAT11__CSI_DATA06            0x1bc 0x4c4 0x648 0x2 0x1
+#define MX6SL_PAD_LCD_DAT11__EIM_DATA05            0x1bc 0x4c4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT11__ECSPI2_SS1            0x1bc 0x4c4 0x6ac 0x4 0x1
+#define MX6SL_PAD_LCD_DAT11__GPIO2_IO31            0x1bc 0x4c4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT11__ARM_TRACE11           0x1bc 0x4c4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT11__SRC_BOOT_CFG11        0x1bc 0x4c4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT12__LCD_DATA12            0x1c0 0x4c8 0x7a8 0x0 0x1
+#define MX6SL_PAD_LCD_DAT12__KEY_COL2              0x1c0 0x4c8 0x73c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT12__CSI_DATA05            0x1c0 0x4c8 0x644 0x2 0x1
+#define MX6SL_PAD_LCD_DAT12__EIM_DATA06            0x1c0 0x4c8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT12__UART5_RTS_B           0x1c0 0x4c8 0x818 0x4 0x2
+#define MX6SL_PAD_LCD_DAT12__UART5_CTS_B           0x1c0 0x4c8 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT12__GPIO3_IO00            0x1c0 0x4c8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT12__ARM_TRACE12           0x1c0 0x4c8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT12__SRC_BOOT_CFG12        0x1c0 0x4c8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT13__LCD_DATA13            0x1c4 0x4cc 0x7ac 0x0 0x1
+#define MX6SL_PAD_LCD_DAT13__KEY_ROW2              0x1c4 0x4cc 0x75c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT13__CSI_DATA04            0x1c4 0x4cc 0x640 0x2 0x1
+#define MX6SL_PAD_LCD_DAT13__EIM_DATA07            0x1c4 0x4cc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT13__UART5_CTS_B           0x1c4 0x4cc 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT13__UART5_RTS_B           0x1c4 0x4cc 0x818 0x4 0x3
+#define MX6SL_PAD_LCD_DAT13__GPIO3_IO01            0x1c4 0x4cc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT13__ARM_TRACE13           0x1c4 0x4cc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT13__SRC_BOOT_CFG13        0x1c4 0x4cc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT14__LCD_DATA14            0x1c8 0x4d0 0x7b0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT14__KEY_COL3              0x1c8 0x4d0 0x740 0x1 0x1
+#define MX6SL_PAD_LCD_DAT14__CSI_DATA03            0x1c8 0x4d0 0x63c 0x2 0x1
+#define MX6SL_PAD_LCD_DAT14__EIM_DATA08            0x1c8 0x4d0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT14__UART5_RX_DATA         0x1c8 0x4d0 0x81c 0x4 0x2
+#define MX6SL_PAD_LCD_DAT14__UART5_TX_DATA         0x1c8 0x4d0 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT14__GPIO3_IO02            0x1c8 0x4d0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT14__ARM_TRACE14           0x1c8 0x4d0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT14__SRC_BOOT_CFG14        0x1c8 0x4d0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT15__LCD_DATA15            0x1cc 0x4d4 0x7b4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT15__KEY_ROW3              0x1cc 0x4d4 0x760 0x1 0x1
+#define MX6SL_PAD_LCD_DAT15__CSI_DATA02            0x1cc 0x4d4 0x638 0x2 0x1
+#define MX6SL_PAD_LCD_DAT15__EIM_DATA09            0x1cc 0x4d4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT15__UART5_TX_DATA         0x1cc 0x4d4 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT15__UART5_RX_DATA         0x1cc 0x4d4 0x81c 0x4 0x3
+#define MX6SL_PAD_LCD_DAT15__GPIO3_IO03            0x1cc 0x4d4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT15__ARM_TRACE15           0x1cc 0x4d4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT15__SRC_BOOT_CFG15        0x1cc 0x4d4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT16__LCD_DATA16            0x1d0 0x4d8 0x7b8 0x0 0x1
+#define MX6SL_PAD_LCD_DAT16__KEY_COL4              0x1d0 0x4d8 0x744 0x1 0x1
+#define MX6SL_PAD_LCD_DAT16__CSI_DATA01            0x1d0 0x4d8 0x634 0x2 0x1
+#define MX6SL_PAD_LCD_DAT16__EIM_DATA10            0x1d0 0x4d8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT16__I2C2_SCL              0x1d0 0x4d8 0x724 0x4 0x3
+#define MX6SL_PAD_LCD_DAT16__GPIO3_IO04            0x1d0 0x4d8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT16__ARM_TRACE16           0x1d0 0x4d8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT16__SRC_BOOT_CFG24        0x1d0 0x4d8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT17__LCD_DATA17            0x1d4 0x4dc 0x7bc 0x0 0x1
+#define MX6SL_PAD_LCD_DAT17__KEY_ROW4              0x1d4 0x4dc 0x764 0x1 0x1
+#define MX6SL_PAD_LCD_DAT17__CSI_DATA00            0x1d4 0x4dc 0x630 0x2 0x1
+#define MX6SL_PAD_LCD_DAT17__EIM_DATA11            0x1d4 0x4dc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT17__I2C2_SDA              0x1d4 0x4dc 0x728 0x4 0x3
+#define MX6SL_PAD_LCD_DAT17__GPIO3_IO05            0x1d4 0x4dc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT17__ARM_TRACE17           0x1d4 0x4dc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT17__SRC_BOOT_CFG25        0x1d4 0x4dc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT18__LCD_DATA18            0x1d8 0x4e0 0x7c0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT18__KEY_COL5              0x1d8 0x4e0 0x748 0x1 0x1
+#define MX6SL_PAD_LCD_DAT18__CSI_DATA15            0x1d8 0x4e0 0x66c 0x2 0x0
+#define MX6SL_PAD_LCD_DAT18__EIM_DATA12            0x1d8 0x4e0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT18__GPT_CAPTURE1          0x1d8 0x4e0 0x710 0x4 0x1
+#define MX6SL_PAD_LCD_DAT18__GPIO3_IO06            0x1d8 0x4e0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT18__ARM_TRACE18           0x1d8 0x4e0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT18__SRC_BOOT_CFG26        0x1d8 0x4e0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT19__LCD_DATA19            0x1dc 0x4e4 0x7c4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT19__KEY_ROW5              0x1dc 0x4e4 0x768 0x1 0x1
+#define MX6SL_PAD_LCD_DAT19__CSI_DATA14            0x1dc 0x4e4 0x668 0x2 0x0
+#define MX6SL_PAD_LCD_DAT19__EIM_DATA13            0x1dc 0x4e4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT19__GPT_CAPTURE2          0x1dc 0x4e4 0x714 0x4 0x1
+#define MX6SL_PAD_LCD_DAT19__GPIO3_IO07            0x1dc 0x4e4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT19__ARM_TRACE19           0x1dc 0x4e4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT19__SRC_BOOT_CFG27        0x1dc 0x4e4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT2__LCD_DATA02             0x1e0 0x4e8 0x780 0x0 0x1
+#define MX6SL_PAD_LCD_DAT2__ECSPI1_SS0             0x1e0 0x4e8 0x68c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT2__EPIT2_OUT              0x1e0 0x4e8 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_DAT2__PWM3_OUT               0x1e0 0x4e8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT2__AUD4_RXC               0x1e0 0x4e8 0x5ec 0x4 0x1
+#define MX6SL_PAD_LCD_DAT2__GPIO2_IO22             0x1e0 0x4e8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT2__ARM_TRACE02            0x1e0 0x4e8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT2__SRC_BOOT_CFG02         0x1e0 0x4e8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT20__LCD_DATA20            0x1e4 0x4ec 0x7c8 0x0 0x1
+#define MX6SL_PAD_LCD_DAT20__KEY_COL6              0x1e4 0x4ec 0x74c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT20__CSI_DATA13            0x1e4 0x4ec 0x664 0x2 0x0
+#define MX6SL_PAD_LCD_DAT20__EIM_DATA14            0x1e4 0x4ec 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT20__GPT_COMPARE1          0x1e4 0x4ec 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT20__GPIO3_IO08            0x1e4 0x4ec 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT20__ARM_TRACE20           0x1e4 0x4ec 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT20__SRC_BOOT_CFG28        0x1e4 0x4ec 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT21__LCD_DATA21            0x1e8 0x4f0 0x7cc 0x0 0x1
+#define MX6SL_PAD_LCD_DAT21__KEY_ROW6              0x1e8 0x4f0 0x76c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT21__CSI_DATA12            0x1e8 0x4f0 0x660 0x2 0x0
+#define MX6SL_PAD_LCD_DAT21__EIM_DATA15            0x1e8 0x4f0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT21__GPT_COMPARE2          0x1e8 0x4f0 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT21__GPIO3_IO09            0x1e8 0x4f0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT21__ARM_TRACE21           0x1e8 0x4f0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT21__SRC_BOOT_CFG29        0x1e8 0x4f0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT22__LCD_DATA22            0x1ec 0x4f4 0x7d0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT22__KEY_COL7              0x1ec 0x4f4 0x750 0x1 0x1
+#define MX6SL_PAD_LCD_DAT22__CSI_DATA11            0x1ec 0x4f4 0x65c 0x2 0x1
+#define MX6SL_PAD_LCD_DAT22__EIM_EB3_B             0x1ec 0x4f4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT22__GPT_COMPARE3          0x1ec 0x4f4 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT22__GPIO3_IO10            0x1ec 0x4f4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT22__ARM_TRACE22           0x1ec 0x4f4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT22__SRC_BOOT_CFG30        0x1ec 0x4f4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT23__LCD_DATA23            0x1f0 0x4f8 0x7d4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT23__KEY_ROW7              0x1f0 0x4f8 0x770 0x1 0x1
+#define MX6SL_PAD_LCD_DAT23__CSI_DATA10            0x1f0 0x4f8 0x658 0x2 0x1
+#define MX6SL_PAD_LCD_DAT23__EIM_EB2_B             0x1f0 0x4f8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT23__GPT_CLKIN             0x1f0 0x4f8 0x718 0x4 0x1
+#define MX6SL_PAD_LCD_DAT23__GPIO3_IO11            0x1f0 0x4f8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT23__ARM_TRACE23           0x1f0 0x4f8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT23__SRC_BOOT_CFG31        0x1f0 0x4f8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT3__LCD_DATA03             0x1f4 0x4fc 0x784 0x0 0x1
+#define MX6SL_PAD_LCD_DAT3__ECSPI1_SCLK            0x1f4 0x4fc 0x67c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT3__UART5_DSR_B            0x1f4 0x4fc 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_DAT3__PWM4_OUT               0x1f4 0x4fc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT3__AUD4_RXD               0x1f4 0x4fc 0x5e4 0x4 0x1
+#define MX6SL_PAD_LCD_DAT3__GPIO2_IO23             0x1f4 0x4fc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT3__ARM_TRACE03            0x1f4 0x4fc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT3__SRC_BOOT_CFG03         0x1f4 0x4fc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT4__LCD_DATA04             0x1f8 0x500 0x788 0x0 0x1
+#define MX6SL_PAD_LCD_DAT4__ECSPI1_SS1             0x1f8 0x500 0x690 0x1 0x1
+#define MX6SL_PAD_LCD_DAT4__CSI_VSYNC              0x1f8 0x500 0x678 0x2 0x2
+#define MX6SL_PAD_LCD_DAT4__WDOG2_RESET_B_DEB      0x1f8 0x500 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT4__AUD4_TXC               0x1f8 0x500 0x5f4 0x4 0x1
+#define MX6SL_PAD_LCD_DAT4__GPIO2_IO24             0x1f8 0x500 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT4__ARM_TRACE04            0x1f8 0x500 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT4__SRC_BOOT_CFG04         0x1f8 0x500 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT5__LCD_DATA05             0x1fc 0x504 0x78c 0x0 0x1
+#define MX6SL_PAD_LCD_DAT5__ECSPI1_SS2             0x1fc 0x504 0x694 0x1 0x1
+#define MX6SL_PAD_LCD_DAT5__CSI_HSYNC              0x1fc 0x504 0x670 0x2 0x2
+#define MX6SL_PAD_LCD_DAT5__EIM_CS3_B              0x1fc 0x504 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT5__AUD4_TXFS              0x1fc 0x504 0x5f8 0x4 0x1
+#define MX6SL_PAD_LCD_DAT5__GPIO2_IO25             0x1fc 0x504 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT5__ARM_TRACE05            0x1fc 0x504 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT5__SRC_BOOT_CFG05         0x1fc 0x504 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT6__LCD_DATA06             0x200 0x508 0x790 0x0 0x1
+#define MX6SL_PAD_LCD_DAT6__ECSPI1_SS3             0x200 0x508 0x698 0x1 0x1
+#define MX6SL_PAD_LCD_DAT6__CSI_PIXCLK             0x200 0x508 0x674 0x2 0x2
+#define MX6SL_PAD_LCD_DAT6__EIM_DATA00             0x200 0x508 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT6__AUD4_TXD               0x200 0x508 0x5e8 0x4 0x1
+#define MX6SL_PAD_LCD_DAT6__GPIO2_IO26             0x200 0x508 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT6__ARM_TRACE06            0x200 0x508 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT6__SRC_BOOT_CFG06         0x200 0x508 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT7__LCD_DATA07             0x204 0x50c 0x794 0x0 0x1
+#define MX6SL_PAD_LCD_DAT7__ECSPI1_RDY             0x204 0x50c 0x680 0x1 0x1
+#define MX6SL_PAD_LCD_DAT7__CSI_MCLK               0x204 0x50c 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_DAT7__EIM_DATA01             0x204 0x50c 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT7__AUDIO_CLK_OUT          0x204 0x50c 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT7__GPIO2_IO27             0x204 0x50c 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT7__ARM_TRACE07            0x204 0x50c 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT7__SRC_BOOT_CFG07         0x204 0x50c 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT8__LCD_DATA08             0x208 0x510 0x798 0x0 0x1
+#define MX6SL_PAD_LCD_DAT8__KEY_COL0               0x208 0x510 0x734 0x1 0x1
+#define MX6SL_PAD_LCD_DAT8__CSI_DATA09             0x208 0x510 0x654 0x2 0x1
+#define MX6SL_PAD_LCD_DAT8__EIM_DATA02             0x208 0x510 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT8__ECSPI2_SCLK            0x208 0x510 0x69c 0x4 0x2
+#define MX6SL_PAD_LCD_DAT8__GPIO2_IO28             0x208 0x510 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT8__ARM_TRACE08            0x208 0x510 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT8__SRC_BOOT_CFG08         0x208 0x510 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT9__LCD_DATA09             0x20c 0x514 0x79c 0x0 0x1
+#define MX6SL_PAD_LCD_DAT9__KEY_ROW0               0x20c 0x514 0x754 0x1 0x1
+#define MX6SL_PAD_LCD_DAT9__CSI_DATA08             0x20c 0x514 0x650 0x2 0x1
+#define MX6SL_PAD_LCD_DAT9__EIM_DATA03             0x20c 0x514 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT9__ECSPI2_MOSI            0x20c 0x514 0x6a4 0x4 0x2
+#define MX6SL_PAD_LCD_DAT9__GPIO2_IO29             0x20c 0x514 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT9__ARM_TRACE09            0x20c 0x514 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT9__SRC_BOOT_CFG09         0x20c 0x514 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_ENABLE__LCD_ENABLE           0x210 0x518 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_ENABLE__SD4_DATA5            0x210 0x518 0x870 0x1 0x2
+#define MX6SL_PAD_LCD_ENABLE__LCD_RD_E             0x210 0x518 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_ENABLE__EIM_OE_B             0x210 0x518 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_ENABLE__UART2_RX_DATA        0x210 0x518 0x804 0x4 0x2
+#define MX6SL_PAD_LCD_ENABLE__UART2_TX_DATA        0x210 0x518 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_ENABLE__GPIO2_IO16           0x210 0x518 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_HSYNC__LCD_HSYNC             0x214 0x51c 0x774 0x0 0x0
+#define MX6SL_PAD_LCD_HSYNC__SD4_DATA6             0x214 0x51c 0x874 0x1 0x2
+#define MX6SL_PAD_LCD_HSYNC__LCD_CS                0x214 0x51c 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_HSYNC__EIM_CS0_B             0x214 0x51c 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_HSYNC__UART2_TX_DATA         0x214 0x51c 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_HSYNC__UART2_RX_DATA         0x214 0x51c 0x804 0x4 0x3
+#define MX6SL_PAD_LCD_HSYNC__GPIO2_IO17            0x214 0x51c 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_HSYNC__ARM_TRACE_CLK         0x214 0x51c 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_RESET__LCD_RESET             0x218 0x520 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_RESET__EIM_DTACK_B           0x218 0x520 0x880 0x1 0x1
+#define MX6SL_PAD_LCD_RESET__LCD_BUSY              0x218 0x520 0x774 0x2 0x1
+#define MX6SL_PAD_LCD_RESET__EIM_WAIT_B            0x218 0x520 0x884 0x3 0x1
+#define MX6SL_PAD_LCD_RESET__UART2_CTS_B           0x218 0x520 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_RESET__UART2_RTS_B           0x218 0x520 0x800 0x4 0x2
+#define MX6SL_PAD_LCD_RESET__GPIO2_IO19            0x218 0x520 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_RESET__CCM_PMIC_READY        0x218 0x520 0x62c 0x6 0x1
+#define MX6SL_PAD_LCD_VSYNC__LCD_VSYNC             0x21c 0x524 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_VSYNC__SD4_DATA7             0x21c 0x524 0x878 0x1 0x2
+#define MX6SL_PAD_LCD_VSYNC__LCD_RS                0x21c 0x524 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_VSYNC__EIM_CS1_B             0x21c 0x524 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_VSYNC__UART2_RTS_B           0x21c 0x524 0x800 0x4 0x3
+#define MX6SL_PAD_LCD_VSYNC__UART2_CTS_B           0x21c 0x524 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_VSYNC__GPIO2_IO18            0x21c 0x524 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_VSYNC__ARM_TRACE_CTL         0x21c 0x524 0x000 0x6 0x0
+#define MX6SL_PAD_PWM1__PWM1_OUT                   0x220 0x528 0x000 0x0 0x0
+#define MX6SL_PAD_PWM1__CCM_CLKO                   0x220 0x528 0x000 0x1 0x0
+#define MX6SL_PAD_PWM1__AUDIO_CLK_OUT              0x220 0x528 0x000 0x2 0x0
+#define MX6SL_PAD_PWM1__FEC_REF_OUT                0x220 0x528 0x000 0x3 0x0
+#define MX6SL_PAD_PWM1__CSI_MCLK                   0x220 0x528 0x000 0x4 0x0
+#define MX6SL_PAD_PWM1__GPIO3_IO23                 0x220 0x528 0x000 0x5 0x0
+#define MX6SL_PAD_PWM1__EPIT1_OUT                  0x220 0x528 0x000 0x6 0x0
+#define MX6SL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x224 0x52c 0x000 0x0 0x0
+#define MX6SL_PAD_REF_CLK_24M__I2C3_SCL            0x224 0x52c 0x72c 0x1 0x2
+#define MX6SL_PAD_REF_CLK_24M__PWM3_OUT            0x224 0x52c 0x000 0x2 0x0
+#define MX6SL_PAD_REF_CLK_24M__USB_OTG2_ID         0x224 0x52c 0x5e0 0x3 0x2
+#define MX6SL_PAD_REF_CLK_24M__CCM_PMIC_READY      0x224 0x52c 0x62c 0x4 0x2
+#define MX6SL_PAD_REF_CLK_24M__GPIO3_IO21          0x224 0x52c 0x000 0x5 0x0
+#define MX6SL_PAD_REF_CLK_24M__SD3_WP              0x224 0x52c 0x84c 0x6 0x3
+#define MX6SL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x228 0x530 0x000 0x0 0x0
+#define MX6SL_PAD_REF_CLK_32K__I2C3_SDA            0x228 0x530 0x730 0x1 0x2
+#define MX6SL_PAD_REF_CLK_32K__PWM4_OUT            0x228 0x530 0x000 0x2 0x0
+#define MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID         0x228 0x530 0x5dc 0x3 0x3
+#define MX6SL_PAD_REF_CLK_32K__SD1_LCTL            0x228 0x530 0x000 0x4 0x0
+#define MX6SL_PAD_REF_CLK_32K__GPIO3_IO22          0x228 0x530 0x000 0x5 0x0
+#define MX6SL_PAD_REF_CLK_32K__SD3_CD_B            0x228 0x530 0x838 0x6 0x3
+#define MX6SL_PAD_SD1_CLK__SD1_CLK                 0x22c 0x534 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_CLK__FEC_MDIO                0x22c 0x534 0x6f4 0x1 0x2
+#define MX6SL_PAD_SD1_CLK__KEY_COL0                0x22c 0x534 0x734 0x2 0x2
+#define MX6SL_PAD_SD1_CLK__EPDC_SDCE4              0x22c 0x534 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_CLK__GPIO5_IO15              0x22c 0x534 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_CMD__SD1_CMD                 0x230 0x538 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_CMD__FEC_TX_CLK              0x230 0x538 0x70c 0x1 0x2
+#define MX6SL_PAD_SD1_CMD__KEY_ROW0                0x230 0x538 0x754 0x2 0x2
+#define MX6SL_PAD_SD1_CMD__EPDC_SDCE5              0x230 0x538 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_CMD__GPIO5_IO14              0x230 0x538 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT0__SD1_DATA0              0x234 0x53c 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT0__FEC_RX_ER              0x234 0x53c 0x708 0x1 0x2
+#define MX6SL_PAD_SD1_DAT0__KEY_COL1               0x234 0x53c 0x738 0x2 0x2
+#define MX6SL_PAD_SD1_DAT0__EPDC_SDCE6             0x234 0x53c 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT0__GPIO5_IO11             0x234 0x53c 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT1__SD1_DATA1              0x238 0x540 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT1__FEC_RX_DV              0x238 0x540 0x704 0x1 0x2
+#define MX6SL_PAD_SD1_DAT1__KEY_ROW1               0x238 0x540 0x758 0x2 0x2
+#define MX6SL_PAD_SD1_DAT1__EPDC_SDCE7             0x238 0x540 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT1__GPIO5_IO08             0x238 0x540 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT2__SD1_DATA2              0x23c 0x544 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT2__FEC_RX_DATA1           0x23c 0x544 0x6fc 0x1 0x2
+#define MX6SL_PAD_SD1_DAT2__KEY_COL2               0x23c 0x544 0x73c 0x2 0x2
+#define MX6SL_PAD_SD1_DAT2__EPDC_SDCE8             0x23c 0x544 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT2__GPIO5_IO13             0x23c 0x544 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT3__SD1_DATA3              0x240 0x548 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT3__FEC_TX_DATA0           0x240 0x548 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT3__KEY_ROW2               0x240 0x548 0x75c 0x2 0x2
+#define MX6SL_PAD_SD1_DAT3__EPDC_SDCE9             0x240 0x548 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT3__GPIO5_IO06             0x240 0x548 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT4__SD1_DATA4              0x244 0x54c 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT4__FEC_MDC                0x244 0x54c 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT4__KEY_COL3               0x244 0x54c 0x740 0x2 0x2
+#define MX6SL_PAD_SD1_DAT4__EPDC_SDCLK_N           0x244 0x54c 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT4__UART4_RX_DATA          0x244 0x54c 0x814 0x4 0x4
+#define MX6SL_PAD_SD1_DAT4__UART4_TX_DATA          0x244 0x54c 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT4__GPIO5_IO12             0x244 0x54c 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT5__SD1_DATA5              0x248 0x550 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT5__FEC_RX_DATA0           0x248 0x550 0x6f8 0x1 0x2
+#define MX6SL_PAD_SD1_DAT5__KEY_ROW3               0x248 0x550 0x760 0x2 0x2
+#define MX6SL_PAD_SD1_DAT5__EPDC_SDOED             0x248 0x550 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT5__UART4_TX_DATA          0x248 0x550 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT5__UART4_RX_DATA          0x248 0x550 0x814 0x4 0x5
+#define MX6SL_PAD_SD1_DAT5__GPIO5_IO09             0x248 0x550 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT6__SD1_DATA6              0x24c 0x554 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT6__FEC_TX_EN              0x24c 0x554 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT6__KEY_COL4               0x24c 0x554 0x744 0x2 0x2
+#define MX6SL_PAD_SD1_DAT6__EPDC_SDOEZ             0x24c 0x554 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT6__UART4_RTS_B            0x24c 0x554 0x810 0x4 0x4
+#define MX6SL_PAD_SD1_DAT6__UART4_CTS_B            0x24c 0x554 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT6__GPIO5_IO07             0x24c 0x554 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT7__SD1_DATA7              0x250 0x558 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT7__FEC_TX_DATA1           0x250 0x558 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT7__KEY_ROW4               0x250 0x558 0x764 0x2 0x2
+#define MX6SL_PAD_SD1_DAT7__CCM_PMIC_READY         0x250 0x558 0x62c 0x3 0x3
+#define MX6SL_PAD_SD1_DAT7__UART4_CTS_B            0x250 0x558 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT7__UART4_RTS_B            0x250 0x558 0x810 0x4 0x5
+#define MX6SL_PAD_SD1_DAT7__GPIO5_IO10             0x250 0x558 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_CLK__SD2_CLK                 0x254 0x55c 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_CLK__AUD4_RXFS               0x254 0x55c 0x5f0 0x1 0x2
+#define MX6SL_PAD_SD2_CLK__ECSPI3_SCLK             0x254 0x55c 0x6b0 0x2 0x2
+#define MX6SL_PAD_SD2_CLK__CSI_DATA00              0x254 0x55c 0x630 0x3 0x2
+#define MX6SL_PAD_SD2_CLK__GPIO5_IO05              0x254 0x55c 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_CMD__SD2_CMD                 0x258 0x560 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_CMD__AUD4_RXC                0x258 0x560 0x5ec 0x1 0x2
+#define MX6SL_PAD_SD2_CMD__ECSPI3_SS0              0x258 0x560 0x6c0 0x2 0x2
+#define MX6SL_PAD_SD2_CMD__CSI_DATA01              0x258 0x560 0x634 0x3 0x2
+#define MX6SL_PAD_SD2_CMD__EPIT1_OUT               0x258 0x560 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_CMD__GPIO5_IO04              0x258 0x560 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT0__SD2_DATA0              0x25c 0x564 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT0__AUD4_RXD               0x25c 0x564 0x5e4 0x1 0x2
+#define MX6SL_PAD_SD2_DAT0__ECSPI3_MOSI            0x25c 0x564 0x6bc 0x2 0x2
+#define MX6SL_PAD_SD2_DAT0__CSI_DATA02             0x25c 0x564 0x638 0x3 0x2
+#define MX6SL_PAD_SD2_DAT0__UART5_RTS_B            0x25c 0x564 0x818 0x4 0x4
+#define MX6SL_PAD_SD2_DAT0__UART5_CTS_B            0x25c 0x564 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT0__GPIO5_IO01             0x25c 0x564 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT1__SD2_DATA1              0x260 0x568 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT1__AUD4_TXC               0x260 0x568 0x5f4 0x1 0x2
+#define MX6SL_PAD_SD2_DAT1__ECSPI3_MISO            0x260 0x568 0x6b8 0x2 0x2
+#define MX6SL_PAD_SD2_DAT1__CSI_DATA03             0x260 0x568 0x63c 0x3 0x2
+#define MX6SL_PAD_SD2_DAT1__UART5_CTS_B            0x260 0x568 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT1__UART5_RTS_B            0x260 0x568 0x818 0x4 0x5
+#define MX6SL_PAD_SD2_DAT1__GPIO4_IO30             0x260 0x568 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT2__SD2_DATA2              0x264 0x56c 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT2__AUD4_TXFS              0x264 0x56c 0x5f8 0x1 0x2
+#define MX6SL_PAD_SD2_DAT2__FEC_COL                0x264 0x56c 0x6f0 0x2 0x1
+#define MX6SL_PAD_SD2_DAT2__CSI_DATA04             0x264 0x56c 0x640 0x3 0x2
+#define MX6SL_PAD_SD2_DAT2__UART5_RX_DATA          0x264 0x56c 0x81c 0x4 0x4
+#define MX6SL_PAD_SD2_DAT2__UART5_TX_DATA          0x264 0x56c 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT2__GPIO5_IO03             0x264 0x56c 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT3__SD2_DATA3              0x268 0x570 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT3__AUD4_TXD               0x268 0x570 0x5e8 0x1 0x2
+#define MX6SL_PAD_SD2_DAT3__FEC_RX_CLK             0x268 0x570 0x700 0x2 0x1
+#define MX6SL_PAD_SD2_DAT3__CSI_DATA05             0x268 0x570 0x644 0x3 0x2
+#define MX6SL_PAD_SD2_DAT3__UART5_TX_DATA          0x268 0x570 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT3__UART5_RX_DATA          0x268 0x570 0x81c 0x4 0x5
+#define MX6SL_PAD_SD2_DAT3__GPIO4_IO28             0x268 0x570 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT4__SD2_DATA4              0x26c 0x574 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT4__SD3_DATA4              0x26c 0x574 0x83c 0x1 0x1
+#define MX6SL_PAD_SD2_DAT4__UART2_RX_DATA          0x26c 0x574 0x804 0x2 0x4
+#define MX6SL_PAD_SD2_DAT4__UART2_TX_DATA          0x26c 0x574 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT4__CSI_DATA06             0x26c 0x574 0x648 0x3 0x2
+#define MX6SL_PAD_SD2_DAT4__SPDIF_OUT              0x26c 0x574 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT4__GPIO5_IO02             0x26c 0x574 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT5__SD2_DATA5              0x270 0x578 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT5__SD3_DATA5              0x270 0x578 0x840 0x1 0x1
+#define MX6SL_PAD_SD2_DAT5__UART2_TX_DATA          0x270 0x578 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT5__UART2_RX_DATA          0x270 0x578 0x804 0x2 0x5
+#define MX6SL_PAD_SD2_DAT5__CSI_DATA07             0x270 0x578 0x64c 0x3 0x2
+#define MX6SL_PAD_SD2_DAT5__SPDIF_IN               0x270 0x578 0x7f0 0x4 0x2
+#define MX6SL_PAD_SD2_DAT5__GPIO4_IO31             0x270 0x578 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT6__SD2_DATA6              0x274 0x57c 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT6__SD3_DATA6              0x274 0x57c 0x844 0x1 0x1
+#define MX6SL_PAD_SD2_DAT6__UART2_RTS_B            0x274 0x57c 0x800 0x2 0x4
+#define MX6SL_PAD_SD2_DAT6__UART2_CTS_B            0x274 0x57c 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT6__CSI_DATA08             0x274 0x57c 0x650 0x3 0x2
+#define MX6SL_PAD_SD2_DAT6__SD2_WP                 0x274 0x57c 0x834 0x4 0x2
+#define MX6SL_PAD_SD2_DAT6__GPIO4_IO29             0x274 0x57c 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT7__SD2_DATA7              0x278 0x580 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT7__SD3_DATA7              0x278 0x580 0x848 0x1 0x1
+#define MX6SL_PAD_SD2_DAT7__UART2_CTS_B            0x278 0x580 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT7__UART2_RTS_B            0x278 0x580 0x800 0x2 0x5
+#define MX6SL_PAD_SD2_DAT7__CSI_DATA09             0x278 0x580 0x654 0x3 0x2
+#define MX6SL_PAD_SD2_DAT7__SD2_CD_B               0x278 0x580 0x830 0x4 0x2
+#define MX6SL_PAD_SD2_DAT7__GPIO5_IO00             0x278 0x580 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_RST__SD2_RESET               0x27c 0x584 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_RST__FEC_REF_OUT             0x27c 0x584 0x000 0x1 0x0
+#define MX6SL_PAD_SD2_RST__WDOG2_B                 0x27c 0x584 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_RST__SPDIF_OUT               0x27c 0x584 0x000 0x3 0x0
+#define MX6SL_PAD_SD2_RST__CSI_MCLK                0x27c 0x584 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_RST__GPIO4_IO27              0x27c 0x584 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_CLK__SD3_CLK                 0x280 0x588 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_CLK__AUD5_RXFS               0x280 0x588 0x608 0x1 0x1
+#define MX6SL_PAD_SD3_CLK__KEY_COL5                0x280 0x588 0x748 0x2 0x2
+#define MX6SL_PAD_SD3_CLK__CSI_DATA10              0x280 0x588 0x658 0x3 0x2
+#define MX6SL_PAD_SD3_CLK__WDOG1_RESET_B_DEB       0x280 0x588 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_CLK__GPIO5_IO18              0x280 0x588 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_CLK__USB_OTG1_PWR            0x280 0x588 0x000 0x6 0x0
+#define MX6SL_PAD_SD3_CMD__SD3_CMD                 0x284 0x58c 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_CMD__AUD5_RXC                0x284 0x58c 0x604 0x1 0x1
+#define MX6SL_PAD_SD3_CMD__KEY_ROW5                0x284 0x58c 0x768 0x2 0x2
+#define MX6SL_PAD_SD3_CMD__CSI_DATA11              0x284 0x58c 0x65c 0x3 0x2
+#define MX6SL_PAD_SD3_CMD__USB_OTG2_ID             0x284 0x58c 0x5e0 0x4 0x3
+#define MX6SL_PAD_SD3_CMD__GPIO5_IO21              0x284 0x58c 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_CMD__USB_OTG2_PWR            0x284 0x58c 0x000 0x6 0x0
+#define MX6SL_PAD_SD3_DAT0__SD3_DATA0              0x288 0x590 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT0__AUD5_RXD               0x288 0x590 0x5fc 0x1 0x1
+#define MX6SL_PAD_SD3_DAT0__KEY_COL6               0x288 0x590 0x74c 0x2 0x2
+#define MX6SL_PAD_SD3_DAT0__CSI_DATA12             0x288 0x590 0x660 0x3 0x1
+#define MX6SL_PAD_SD3_DAT0__USB_OTG1_ID            0x288 0x590 0x5dc 0x4 0x4
+#define MX6SL_PAD_SD3_DAT0__GPIO5_IO19             0x288 0x590 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT1__SD3_DATA1              0x28c 0x594 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT1__AUD5_TXC               0x28c 0x594 0x60c 0x1 0x1
+#define MX6SL_PAD_SD3_DAT1__KEY_ROW6               0x28c 0x594 0x76c 0x2 0x2
+#define MX6SL_PAD_SD3_DAT1__CSI_DATA13             0x28c 0x594 0x664 0x3 0x1
+#define MX6SL_PAD_SD3_DAT1__SD1_VSELECT            0x28c 0x594 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_DAT1__GPIO5_IO20             0x28c 0x594 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT1__JTAG_DE_B              0x28c 0x594 0x000 0x6 0x0
+#define MX6SL_PAD_SD3_DAT2__SD3_DATA2              0x290 0x598 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT2__AUD5_TXFS              0x290 0x598 0x610 0x1 0x1
+#define MX6SL_PAD_SD3_DAT2__KEY_COL7               0x290 0x598 0x750 0x2 0x2
+#define MX6SL_PAD_SD3_DAT2__CSI_DATA14             0x290 0x598 0x668 0x3 0x1
+#define MX6SL_PAD_SD3_DAT2__EPIT1_OUT              0x290 0x598 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_DAT2__GPIO5_IO16             0x290 0x598 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT2__USB_OTG2_OC            0x290 0x598 0x820 0x6 0x3
+#define MX6SL_PAD_SD3_DAT3__SD3_DATA3              0x294 0x59c 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT3__AUD5_TXD               0x294 0x59c 0x600 0x1 0x1
+#define MX6SL_PAD_SD3_DAT3__KEY_ROW7               0x294 0x59c 0x770 0x2 0x2
+#define MX6SL_PAD_SD3_DAT3__CSI_DATA15             0x294 0x59c 0x66c 0x3 0x1
+#define MX6SL_PAD_SD3_DAT3__EPIT2_OUT              0x294 0x59c 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_DAT3__GPIO5_IO17             0x294 0x59c 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT3__USB_OTG1_OC            0x294 0x59c 0x824 0x6 0x2
+#define MX6SL_PAD_UART1_RXD__UART1_RX_DATA         0x298 0x5a0 0x7fc 0x0 0x0
+#define MX6SL_PAD_UART1_RXD__UART1_TX_DATA         0x298 0x5a0 0x000 0x0 0x0
+#define MX6SL_PAD_UART1_RXD__PWM1_OUT              0x298 0x5a0 0x000 0x1 0x0
+#define MX6SL_PAD_UART1_RXD__UART4_RX_DATA         0x298 0x5a0 0x814 0x2 0x6
+#define MX6SL_PAD_UART1_RXD__UART4_TX_DATA         0x298 0x5a0 0x000 0x2 0x0
+#define MX6SL_PAD_UART1_RXD__FEC_COL               0x298 0x5a0 0x6f0 0x3 0x2
+#define MX6SL_PAD_UART1_RXD__UART5_RX_DATA         0x298 0x5a0 0x81c 0x4 0x6
+#define MX6SL_PAD_UART1_RXD__UART5_TX_DATA         0x298 0x5a0 0x000 0x4 0x0
+#define MX6SL_PAD_UART1_RXD__GPIO3_IO16            0x298 0x5a0 0x000 0x5 0x0
+#define MX6SL_PAD_UART1_TXD__UART1_TX_DATA         0x29c 0x5a4 0x000 0x0 0x0
+#define MX6SL_PAD_UART1_TXD__UART1_RX_DATA         0x29c 0x5a4 0x7fc 0x0 0x1
+#define MX6SL_PAD_UART1_TXD__PWM2_OUT              0x29c 0x5a4 0x000 0x1 0x0
+#define MX6SL_PAD_UART1_TXD__UART4_TX_DATA         0x29c 0x5a4 0x000 0x2 0x0
+#define MX6SL_PAD_UART1_TXD__UART4_RX_DATA         0x29c 0x5a4 0x814 0x2 0x7
+#define MX6SL_PAD_UART1_TXD__FEC_RX_CLK            0x29c 0x5a4 0x700 0x3 0x2
+#define MX6SL_PAD_UART1_TXD__UART5_TX_DATA         0x29c 0x5a4 0x000 0x4 0x0
+#define MX6SL_PAD_UART1_TXD__UART5_RX_DATA         0x29c 0x5a4 0x81c 0x4 0x7
+#define MX6SL_PAD_UART1_TXD__GPIO3_IO17            0x29c 0x5a4 0x000 0x5 0x0
+#define MX6SL_PAD_UART1_TXD__UART5_DCD_B           0x29c 0x5a4 0x000 0x7 0x0
+#define MX6SL_PAD_WDOG_B__WDOG1_B                  0x2a0 0x5a8 0x000 0x0 0x0
+#define MX6SL_PAD_WDOG_B__WDOG1_RESET_B_DEB        0x2a0 0x5a8 0x000 0x1 0x0
+#define MX6SL_PAD_WDOG_B__UART5_RI_B               0x2a0 0x5a8 0x000 0x2 0x0
+#define MX6SL_PAD_WDOG_B__GPIO3_IO18               0x2a0 0x5a8 0x000 0x5 0x0
+
+#endif /* __DTS_IMX6SL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
new file mode 100644
index 0000000000000..815119c12bd48
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
@@ -0,0 +1,634 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Tolino Shine 2 HD ebook reader
+ *
+ * Name on mainboard is: 37NB-E60QF0+4A2 or 37NB-E60QF0+4A3
+ * Serials start with: E60QF2
+ *
+ * Copyright 2020 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Tolino Shine 2 HD";
+	compatible = "kobo,tolino-shine2hd", "fsl,imx6sl";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ec 0 50000>;
+		power-supply = <&backlight_regulator>;
+	};
+
+	backlight_regulator: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_power>;
+		regulator-name = "backlight";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-fl {
+			label = "Frontlight";
+			gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BRIGHTNESS_CYCLE>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-0 {
+			label = "tolinoshine2hd:white:on";
+			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-1 {
+			label = "tolinoshine2hd:white:backlightboost";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "off";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_power>;
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reset>;
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	status = "okay";
+
+	ec: embedded-controller@43 {
+		compatible = "netronix,ntxec";
+		reg = <0x43>;
+		#pwm-cells = <2>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	zforce: touchscreen@50 {
+		compatible = "neonode,zforce";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_zforce>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&ldo1_reg>;
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+		x-size = <1072>;
+		y-size = <1448>;
+	};
+
+	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
+
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ricoh_gpio>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3100000>;
+					regulator-suspend-min-microvolt = <3100000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			/* IR_3V3 */
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_backlight_power: backlight-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x17059
+			MX6SL_PAD_KEY_COL1__GPIO3_IO26  0x17059
+			MX6SL_PAD_KEY_ROW0__GPIO3_IO25  0x17059
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SL_PAD_LCD_DAT0__GPIO2_IO20	0x79
+			MX6SL_PAD_LCD_DAT1__GPIO2_IO21	0x79
+			MX6SL_PAD_LCD_DAT2__GPIO2_IO22	0x79
+			MX6SL_PAD_LCD_DAT3__GPIO2_IO23	0x79
+			MX6SL_PAD_LCD_DAT4__GPIO2_IO24	0x79
+			MX6SL_PAD_LCD_DAT5__GPIO2_IO25	0x79
+			MX6SL_PAD_LCD_DAT6__GPIO2_IO26	0x79
+			MX6SL_PAD_LCD_DAT7__GPIO2_IO27	0x79
+			MX6SL_PAD_LCD_DAT8__GPIO2_IO28	0x79
+			MX6SL_PAD_LCD_DAT9__GPIO2_IO29	0x79
+			MX6SL_PAD_LCD_DAT10__GPIO2_IO30	0x79
+			MX6SL_PAD_LCD_DAT11__GPIO2_IO31	0x79
+			MX6SL_PAD_LCD_DAT12__GPIO3_IO00	0x79
+			MX6SL_PAD_LCD_DAT13__GPIO3_IO01	0x79
+			MX6SL_PAD_LCD_DAT14__GPIO3_IO02	0x79
+			MX6SL_PAD_LCD_DAT15__GPIO3_IO03	0x79
+			MX6SL_PAD_LCD_DAT16__GPIO3_IO04	0x79
+			MX6SL_PAD_LCD_DAT17__GPIO3_IO05	0x79
+			MX6SL_PAD_LCD_DAT18__GPIO3_IO06	0x79
+			MX6SL_PAD_LCD_DAT19__GPIO3_IO07	0x79
+			MX6SL_PAD_LCD_DAT20__GPIO3_IO08	0x79
+			MX6SL_PAD_LCD_DAT21__GPIO3_IO09	0x79
+			MX6SL_PAD_LCD_DAT22__GPIO3_IO10	0x79
+			MX6SL_PAD_LCD_DAT23__GPIO3_IO11	0x79
+			MX6SL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+			MX6SL_PAD_KEY_COL5__GPIO4_IO02		0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13    0x17059
+			MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29  0x17059
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh_gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CLK__GPIO5_IO15	0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11	0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28	0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+
+	pinctrl_zforce: zforcegrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT3__GPIO5_IO06		0x17059 /* TP_INT */
+			MX6SL_PAD_SD1_DAT5__GPIO5_IO09		0x10059 /* TP_RST */
+		>;
+	};
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_arm {
+	vin-supply = <&dcdc3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&snvs_rtc {
+	/*
+	 * We are using the RTC in the PMIC, but this one is not disabled
+	 * in imx6sl.dtsi.
+	 */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4, through-holes */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	/* TP198, next to J4, SMD pads */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	non-removable;
+	status = "okay";
+
+	/* internal uSD card */
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * 37NB-E60QF0+4A2: CyberTan WC121 (BCM43362) SDIO WiFi
+	 * 37NB-E60QF0+4A3: RTL8189F SDIO WiFi
+	 */
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts
new file mode 100644
index 0000000000000..db5d8509935f1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Tolino Shine 3 ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K00+4A4
+ * Serials start with: E60K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Toline Shine 3 ebook reader it is a i.MX6SL
+ *
+ * Copyright 2019 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+#include "e60k02.dtsi"
+
+/ {
+	model = "Tolino Shine 3";
+	compatible = "kobo,tolino-shine3", "fsl,imx6sl";
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT3__GPIO5_IO06                0x17059 /* TP_INT */
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13                0x10059 /* TP_RST */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08	0x17059	/* PWR_SW */
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12	0x17059	/* HALL_EN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SL_PAD_LCD_DAT0__GPIO2_IO20	0x79
+			MX6SL_PAD_LCD_DAT1__GPIO2_IO21	0x79
+			MX6SL_PAD_LCD_DAT2__GPIO2_IO22	0x79
+			MX6SL_PAD_LCD_DAT3__GPIO2_IO23	0x79
+			MX6SL_PAD_LCD_DAT4__GPIO2_IO24	0x79
+			MX6SL_PAD_LCD_DAT5__GPIO2_IO25	0x79
+			MX6SL_PAD_LCD_DAT6__GPIO2_IO26	0x79
+			MX6SL_PAD_LCD_DAT7__GPIO2_IO27	0x79
+			MX6SL_PAD_LCD_DAT8__GPIO2_IO28	0x79
+			MX6SL_PAD_LCD_DAT9__GPIO2_IO29	0x79
+			MX6SL_PAD_LCD_DAT10__GPIO2_IO30	0x79
+			MX6SL_PAD_LCD_DAT11__GPIO2_IO31	0x79
+			MX6SL_PAD_LCD_DAT12__GPIO3_IO00	0x79
+			MX6SL_PAD_LCD_DAT13__GPIO3_IO01	0x79
+			MX6SL_PAD_LCD_DAT14__GPIO3_IO02	0x79
+			MX6SL_PAD_LCD_DAT15__GPIO3_IO03	0x79
+			MX6SL_PAD_LCD_DAT16__GPIO3_IO04	0x79
+			MX6SL_PAD_LCD_DAT17__GPIO3_IO05	0x79
+			MX6SL_PAD_LCD_DAT18__GPIO3_IO06	0x79
+			MX6SL_PAD_LCD_DAT19__GPIO3_IO07	0x79
+			MX6SL_PAD_LCD_DAT20__GPIO3_IO08	0x79
+			MX6SL_PAD_LCD_DAT21__GPIO3_IO09	0x79
+			MX6SL_PAD_LCD_DAT22__GPIO3_IO10	0x79
+			MX6SL_PAD_LCD_DAT23__GPIO3_IO11	0x79
+			MX6SL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+			MX6SL_PAD_KEY_COL5__GPIO4_IO02		0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10		0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh_gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CLK__GPIO5_IO15                  0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11        0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28                         0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts
new file mode 100644
index 0000000000000..2694fe18a91b1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Tolino Vison ebook reader
+ *
+ * Name on mainboard is: 37NB-E60Q30+4A3
+ * Serials start with: 6032
+ *
+ * Copyright 2023 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Tolino Vision";
+	compatible = "kobo,tolino-vision", "fsl,imx6sl";
+
+	aliases {
+		mmc0 = &usdhc4;
+		mmc1 = &usdhc2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ec 0 50000>;
+		power-supply = <&backlight_regulator>;
+	};
+
+	backlight_regulator: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_power>;
+		regulator-name = "backlight";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			/* magnetic sensor in the corner next to the uSD slot */
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-fl {
+			label = "Frontlight";
+			gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BRIGHTNESS_CYCLE>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			/* LED on home button */
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* LED on power button */
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_power>;
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reset>;
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	status = "okay";
+
+	touchscreen@15 {
+		compatible = "elan,ektf2132";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		power-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio5 6 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	accelerometer@1d {
+		compatible = "fsl,mma8652";
+		reg = <0x1d>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	ec: embedded-controller@43 {
+		compatible = "netronix,ntxec";
+		reg = <0x43>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ec>;
+		interrupts-extended = <&gpio5 11 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+	};
+};
+
+&snvs_rtc {
+	/*
+	 * We are using the RTC in the PMIC, but this one is not disabled
+	 * in imx6sl.dtsi.
+	 */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	/* J9 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	cd-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* removable uSD card */
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+
+	/* CyberTan WC121 (BCM43362) SDIO WiFi */
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc4_sleep>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+
+	/* internal eMMC */
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight_power: backlight-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059
+		>;
+	};
+
+	pinctrl_ec: ecgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11  0x17000
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x110B0
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x110B0
+			MX6SL_PAD_KEY_COL1__GPIO3_IO26  0x11030
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07    0x17059
+			MX6SL_PAD_SD1_DAT7__GPIO5_IO10    0x17059
+			MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29  0x17059
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13	0x110B0
+			MX6SL_PAD_SD1_DAT3__GPIO5_IO06	0x1B0B1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6SL_PAD_SD2_DAT4__GPIO5_IO02		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x17059
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x13059
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x17059
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x17059
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x17059
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x17059
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x17059
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x17059
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x17059
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x17059
+			MX6SL_PAD_FEC_REF_CLK__SD4_RESET	0x17068
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x170b9
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x130b9
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x170b9
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x170b9
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x170b9
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x170b9
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x170b9
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x170b9
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x170b9
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x170f9
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x130f9
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x170f9
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x170f9
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x170f9
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x170f9
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x170f9
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x170f9
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x170f9
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc4_sleep: usdhc4-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21	0x100c1
+			MX6SL_PAD_FEC_MDIO__GPIO4_IO20		0x100c1
+			MX6SL_PAD_FEC_RX_ER__GPIO4_IO19		0x100c1
+			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25	0x100c1
+			MX6SL_PAD_FEC_RXD1__GPIO4_IO18		0x100c1
+			MX6SL_PAD_FEC_TXD0__GPIO4_IO24		0x100c1
+			MX6SL_PAD_FEC_MDC__GPIO4_IO23		0x100c1
+			MX6SL_PAD_FEC_RXD0__GPIO4_IO17		0x100c1
+			MX6SL_PAD_FEC_TX_EN__GPIO4_IO22		0x100c1
+			MX6SL_PAD_FEC_TXD1__GPIO4_IO16		0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts
new file mode 100644
index 0000000000000..6bc342035e2b6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Tolino Vision 5 ebook reader
+ *
+ * Name on mainboard is: 37NB-E70K0M+6A3
+ * Serials start with: E70K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Tolino Vision 5 ebook reader it is a i.MX6SL
+ *
+ * Copyright 2021 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+#include "e70k02.dtsi"
+
+/ {
+	model = "Tolino Vision 5";
+	compatible = "kobo,tolino-vision5", "fsl,imx6sl";
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TXD0__GPIO4_IO24          0x17059 /* TP_INT */
+			MX6SL_PAD_FEC_RXD1__GPIO4_IO18          0x10059 /* TP_RST */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25	0x17059	/* PWR_SW */
+			MX6SL_PAD_FEC_MDC__GPIO4_IO23	0x17059	/* HALL_EN */
+			MX6SL_PAD_KEY_COL4__GPIO4_IO00		0x17059	/* PAGE_UP */
+			MX6SL_PAD_KEY_COL5__GPIO4_IO02		0x17059	/* PAGE_DOWN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SL_PAD_LCD_DAT1__GPIO2_IO21	0x79
+			MX6SL_PAD_LCD_DAT4__GPIO2_IO24	0x79
+			MX6SL_PAD_LCD_DAT5__GPIO2_IO25	0x79
+			MX6SL_PAD_LCD_DAT6__GPIO2_IO26	0x79
+			MX6SL_PAD_LCD_DAT7__GPIO2_IO27	0x79
+			MX6SL_PAD_LCD_DAT8__GPIO2_IO28	0x79
+			MX6SL_PAD_LCD_DAT9__GPIO2_IO29	0x79
+			MX6SL_PAD_LCD_DAT10__GPIO2_IO30	0x79
+			MX6SL_PAD_LCD_DAT11__GPIO2_IO31	0x79
+			MX6SL_PAD_LCD_DAT12__GPIO3_IO00	0x79
+			MX6SL_PAD_LCD_DAT13__GPIO3_IO01	0x79
+			MX6SL_PAD_LCD_DAT14__GPIO3_IO02	0x79
+			MX6SL_PAD_LCD_DAT15__GPIO3_IO03	0x79
+			MX6SL_PAD_LCD_DAT16__GPIO3_IO04	0x79
+			MX6SL_PAD_LCD_DAT17__GPIO3_IO05	0x79
+			MX6SL_PAD_LCD_DAT18__GPIO3_IO06	0x79
+			MX6SL_PAD_LCD_DAT19__GPIO3_IO07	0x79
+			MX6SL_PAD_LCD_DAT20__GPIO3_IO08	0x79
+			MX6SL_PAD_LCD_DAT21__GPIO3_IO09	0x79
+			MX6SL_PAD_LCD_DAT22__GPIO3_IO10	0x79
+			MX6SL_PAD_LCD_DAT23__GPIO3_IO11	0x79
+			MX6SL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21	0x79
+			MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26	0x79
+			MX6SL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_RXD0__GPIO4_IO17	0x10059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10		0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_MDIO__GPIO4_IO20		0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_FEC_RX_ER__GPIO4_IO19		0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28		0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x17059
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x17059
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x17059
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x17059
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x17059
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x17059
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x17059
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x17059
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x170b9
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x170b9
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x170b9
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x170b9
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x170b9
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x170b9
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x170b9
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x170b9
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x170b9
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x170f9
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x170f9
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x170f9
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x170f9
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x170f9
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x170f9
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x170b9
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x170b9
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x170b9
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x10059
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x10059
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x10059
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x10059
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x10059
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x10059
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x10059
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x10059
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x10059
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x10059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	 /* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_arm {
+	vin-supply = <&dcdc3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts
new file mode 100644
index 0000000000000..9d7c8884892a9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts
@@ -0,0 +1,234 @@
+/*
+ * Copyright 2014, 2015 O.S. Systems Software LTDA.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Revotics WaRP Board";
+	compatible = "revotics,imx6sl-warp", "fsl,imx6sl";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, 	/* WL_REG_ON */
+			      <&gpio4 7 GPIO_ACTIVE_LOW>, 	/* WL_HOSTWAKE */
+			      <&gpio3 25 GPIO_ACTIVE_LOW>, 	/* BT_REG_ON */
+			      <&gpio3 27 GPIO_ACTIVE_LOW>,	/* BT_HOSTWAKE */
+			      <&gpio4 4 GPIO_ACTIVE_LOW>, 	/* BT_WAKE */
+			      <&gpio4 6 GPIO_ACTIVE_LOW>; 	/* BT_RST_N */
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6sl-warp {
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x41b0b1
+				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x41b0b1
+			>;
+		};
+
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6SL_PAD_AUD_RXC__UART3_RX_DATA	0x41b0b1
+				MX6SL_PAD_AUD_RXC__UART3_TX_DATA	0x41b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA	0x41b0b1
+				MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA	0x41b0b1
+				MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B	0x4130b1
+				MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B	0x4130b1
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x417059
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x410059
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x417059
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x417059
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x417059
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x417059
+				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x417059
+				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x417059
+				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x417059
+				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x417059
+				MX6SL_PAD_SD2_RST__SD2_RESET		0x417059
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170b9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100b9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170b9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170b9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170b9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170b9
+				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170b9
+				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170b9
+				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170b9
+				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170b9
+				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170b9
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170f9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100f9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170f9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170f9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170f9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170f9
+				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170f9
+				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170f9
+				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170f9
+				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170f9
+				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170f9
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x417059
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x410059
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x417059
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x417059
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x417059
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x417059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170b9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100b9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170b9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170b9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170b9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170f9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100f9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170f9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170f9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170f9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170f9
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi
new file mode 100644
index 0000000000000..28111efb19a66
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi
@@ -0,0 +1,1008 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6sl-pinfunc.h"
+#include <dt-bindings/clock/imx6sl-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		mmc3 = &usdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usb2 = &usbh;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+			operating-points =
+				/* kHz    uV */
+				<996000  1275000>,
+				<792000  1175000>,
+				<396000  975000>;
+			fsl,soc-operating-points =
+				/* ARM kHz	SOC-PU uV */
+				<996000		1225000>,
+				<792000		1175000>,
+				<396000		1175000>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
+					<&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
+					<&clks IMX6SL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	clocks {
+		ckil {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6SL_CLK_OCRAM>;
+		};
+
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
+		L2: cache-controller@a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		aips1: bus@2000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba: spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@2004000 {
+					compatible = "fsl,imx6sl-spdif",
+						"fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>,
+						<&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>,
+						 <&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						"rxtx1", "rxtx2",
+						"rxtx3", "rxtx4",
+						"rxtx5", "rxtx6",
+						"rxtx7", "spba";
+					status = "disabled";
+				};
+
+				ecspi1: spi@2008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI1>,
+						 <&clks IMX6SL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI2>,
+						 <&clks IMX6SL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI3>,
+						 <&clks IMX6SL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI4>,
+						 <&clks IMX6SL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart5: serial@2018000 {
+					compatible = "fsl,imx6sl-uart",
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6sl-uart",
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart2: serial@2024000 {
+					compatible = "fsl,imx6sl-uart",
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ssi1: ssi@2028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_SSI1_IPG>,
+						 <&clks IMX6SL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 37 1 0>,
+					       <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi2: ssi@202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_SSI2_IPG>,
+						 <&clks IMX6SL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 41 1 0>,
+					       <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi3: ssi@2030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_SSI3_IPG>,
+						 <&clks IMX6SL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 45 1 0>,
+					       <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				uart3: serial@2034000 {
+					compatible = "fsl,imx6sl-uart",
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02034000 0x4000>;
+					interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart4: serial@2038000 {
+					compatible = "fsl,imx6sl-uart",
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02038000 0x4000>;
+					interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+
+			pwm1: pwm@2080000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PERCLK>,
+					 <&clks IMX6SL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm2: pwm@2084000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PERCLK>,
+					 <&clks IMX6SL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm3: pwm@2088000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PERCLK>,
+					 <&clks IMX6SL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm4: pwm@208c000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PERCLK>,
+					 <&clks IMX6SL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt: timer@2098000 {
+				compatible = "fsl,imx6sl-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_GPT>,
+					 <&clks IMX6SL_CLK_GPT_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 22 1>, <&iomuxc  1 20 2>,
+					      <&iomuxc  3 23 1>, <&iomuxc  4 25 1>,
+					      <&iomuxc  5 24 1>, <&iomuxc  6 19 1>,
+					      <&iomuxc  7 36 2>, <&iomuxc  9 44 8>,
+					      <&iomuxc 17 38 6>, <&iomuxc 23 68 4>,
+					      <&iomuxc 27 64 4>, <&iomuxc 31 52 1>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  53 3>, <&iomuxc  3  72 2>,
+					      <&iomuxc  5  34 2>, <&iomuxc  7  57 4>,
+					      <&iomuxc 11  56 1>, <&iomuxc 12  61 3>,
+					      <&iomuxc 15 107 1>, <&iomuxc 16 132 2>,
+					      <&iomuxc 18 135 1>, <&iomuxc 19 134 1>,
+					      <&iomuxc 20 108 2>, <&iomuxc 22 120 1>,
+					      <&iomuxc 23 125 7>, <&iomuxc 30 110 2>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 112 8>, <&iomuxc  8 121 4>,
+					      <&iomuxc 12  97 4>, <&iomuxc 16 166 3>,
+					      <&iomuxc 19  85 2>, <&iomuxc 21 137 2>,
+					      <&iomuxc 23 136 1>, <&iomuxc 24  91 1>,
+					      <&iomuxc 25  99 1>, <&iomuxc 26  92 1>,
+					      <&iomuxc 27 100 1>, <&iomuxc 28  93 1>,
+					      <&iomuxc 29 101 1>, <&iomuxc 30  94 1>,
+					      <&iomuxc 31 102 1>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  95 1>, <&iomuxc  1 103 1>,
+					      <&iomuxc  2  96 1>, <&iomuxc  3 104 1>,
+					      <&iomuxc  4  97 1>, <&iomuxc  5 105 1>,
+					      <&iomuxc  6  98 1>, <&iomuxc  7 106 1>,
+					      <&iomuxc  8  28 1>, <&iomuxc  9  27 1>,
+					      <&iomuxc 10  26 1>, <&iomuxc 11  29 1>,
+					      <&iomuxc 12  32 1>, <&iomuxc 13  31 1>,
+					      <&iomuxc 14  30 1>, <&iomuxc 15  33 1>,
+					      <&iomuxc 16  84 1>, <&iomuxc 17  79 2>,
+					      <&iomuxc 19  78 1>, <&iomuxc 20  76 1>,
+					      <&iomuxc 21  81 2>, <&iomuxc 23  75 1>,
+					      <&iomuxc 24  83 1>, <&iomuxc 25  74 1>,
+					      <&iomuxc 26  77 1>, <&iomuxc 27 159 1>,
+					      <&iomuxc 28 154 1>, <&iomuxc 29 157 1>,
+					      <&iomuxc 30 152 1>, <&iomuxc 31 156 1>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 158 1>, <&iomuxc  1 151 1>,
+					      <&iomuxc  2 155 1>, <&iomuxc  3 153 1>,
+					      <&iomuxc  4 150 1>, <&iomuxc  5 149 1>,
+					      <&iomuxc  6 144 1>, <&iomuxc  7 147 1>,
+					      <&iomuxc  8 142 1>, <&iomuxc  9 146 1>,
+					      <&iomuxc 10 148 1>, <&iomuxc 11 141 1>,
+					      <&iomuxc 12 145 1>, <&iomuxc 13 143 1>,
+					      <&iomuxc 14 140 1>, <&iomuxc 15 139 1>,
+					      <&iomuxc 16 164 2>, <&iomuxc 18 160 1>,
+					      <&iomuxc 19 162 1>, <&iomuxc 20 163 1>,
+					      <&iomuxc 21 161 1>;
+			};
+
+			kpp: keypad@20b8000 {
+				compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_IPG>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@20bc000 {
+				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_IPG>;
+			};
+
+			wdog2: watchdog@20c0000 {
+				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_IPG>;
+				status = "disabled";
+			};
+
+			clks: clock-controller@20c4000 {
+				compatible = "fsl,imx6sl-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6sl-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-mfd";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_vdd1p1: regulator-1p1 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd3p0: regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd2p5: regulator-2p5 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2250000>;
+					regulator-max-microvolt = <2750000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2100000>;
+					anatop-max-voltage = <2850000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_pu: regulator-vddpu {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6q-tempmon";
+					interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-parent = <&gpc>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
+				};
+			};
+
+			usbphy1: usbphy@20c9000 {
+				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@20ca000 {
+				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBPHY2>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+			};
+
+			epit1: epit@20d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@20d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: reset-controller@20d8000 {
+				compatible = "fsl,imx6sl-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@20dc000 {
+				compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6SL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_pu: power-domain@1 {
+						reg = <1>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_pu>;
+						clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
+							 <&clks IMX6SL_CLK_GPU2D_PODF>;
+					};
+
+					pd_disp: power-domain@2 {
+						reg = <2>;
+						#power-domain-cells = <0>;
+						clocks = <&clks IMX6SL_CLK_LCDIF_AXI>,
+							 <&clks IMX6SL_CLK_LCDIF_PIX>,
+							 <&clks IMX6SL_CLK_EPDC_AXI>,
+							 <&clks IMX6SL_CLK_EPDC_PIX>,
+							 <&clks IMX6SL_CLK_PXP_AXI>;
+					};
+				};
+			};
+
+			gpr: iomuxc-gpr@20e0000 {
+				compatible = "fsl,imx6sl-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e0000 0x38>;
+			};
+
+			iomuxc: pinctrl@20e0000 {
+				compatible = "fsl,imx6sl-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			csi: csi@20e4000 {
+				reg = <0x020e4000 0x4000>;
+				interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			spdc: spdc@20e8000 {
+				reg = <0x020e8000 0x4000>;
+				interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sdma: dma-controller@20ec000 {
+				compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_SDMA>,
+					 <&clks IMX6SL_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				/* imx6sl reuses imx6q sdma firmware */
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pxp: pxp@20f0000 {
+				reg = <0x020f0000 0x4000>;
+				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epdc: epdc@20f4000 {
+				reg = <0x020f4000 0x4000>;
+				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			lcdif: lcdif@20f8000 {
+				compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_LCDIF_PIX>,
+					 <&clks IMX6SL_CLK_LCDIF_AXI>,
+					 <&clks IMX6SL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+				power-domains = <&pd_disp>;
+			};
+
+			dcp: crypto@20fc000 {
+				compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 101 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aips2: bus@2100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@2184000 {
+				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@2184200 {
+				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh: usb@2184400 {
+				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphynop1>;
+				phy_type = "hsic";
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+			};
+
+			fec: ethernet@2188000 {
+				compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
+				reg = <0x02188000 0x4000>;
+				interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_ENET>,
+					 <&clks IMX6SL_CLK_ENET_REF>;
+				clock-names = "ipg", "ahb";
+				status = "disabled";
+			};
+
+			usdhc1: mmc@2190000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC1>,
+					 <&clks IMX6SL_CLK_USDHC1>,
+					 <&clks IMX6SL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@2194000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC2>,
+					 <&clks IMX6SL_CLK_USDHC2>,
+					 <&clks IMX6SL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@2198000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC3>,
+					 <&clks IMX6SL_CLK_USDHC3>,
+					 <&clks IMX6SL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc4: mmc@219c000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC4>,
+					 <&clks IMX6SL_CLK_USDHC4>,
+					 <&clks IMX6SL_CLK_USDHC4>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			memory-controller@21b0000 {
+				compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6SL_CLK_MMDC_P0_IPG>;
+			};
+
+			rngb: rngb@21b4000 {
+				compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb";
+				reg = <0x021b4000 0x4000>;
+				interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_DUMMY>;
+			};
+
+			weim: weim@21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				reg = <0x021b8000 0x4000>;
+				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
+			ocotp: efuse@21bc000 {
+				compatible = "fsl,imx6sl-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SL_CLK_OCOTP>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+			};
+
+			audmux: audmux@21d8000 {
+				compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+		};
+
+		gpu_2d: gpu@2200000 {
+			compatible = "vivante,gc";
+			reg = <0x02200000 0x4000>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SL_CLK_MMDC_ROOT>,
+				 <&clks IMX6SL_CLK_GPU2D_OVG>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+		};
+
+		gpu_vg: gpu@2204000 {
+			compatible = "vivante,gc";
+			reg = <0x02204000 0x4000>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SL_CLK_MMDC_ROOT>,
+				 <&clks IMX6SL_CLK_GPU2D_OVG>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts
new file mode 100644
index 0000000000000..e3e9b0ec4f734
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts
@@ -0,0 +1,643 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sll.dtsi"
+
+/ {
+	model = "Freescale i.MX6SLL EVK Board";
+	compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user {
+			label = "debug";
+			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_usb_otg1_vbus: regulator-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_aud3v: regulator-aud3v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-3v15";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-boot-on;
+	};
+
+	reg_aud4v: regulator-aud4v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-4v2";
+		regulator-min-microvolt = <4325000>;
+		regulator-max-microvolt = <4325000>;
+		regulator-boot-on;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_sd1_vmmc>;
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sd2_vmmc: regulator-sd2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "eMMC-VCCQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+	};
+
+	reg_sd3_vmmc: regulator-sd3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_sd3_vmmc>;
+		regulator-name = "SD3_WIFI";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		model = "wm8962-audio";
+		audio-cpu = <&ssi2>;
+		audio-codec = <&wm8962>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+		hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+	soc-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	vqmmc-supply = <&reg_sd2_vmmc>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd3_vmmc>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux3: audmux3grp {
+		fsl,pins = <
+			MX6SLL_PAD_AUD_TXC__AUD3_TXC		0x4130b0
+			MX6SLL_PAD_AUD_TXFS__AUD3_TXFS		0x4130b0
+			MX6SLL_PAD_AUD_TXD__AUD3_TXD		0x4110b0
+			MX6SLL_PAD_AUD_RXD__AUD3_RXD		0x4130b0
+			MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT	0x4130b0
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
+		>;
+	};
+
+	pinctrl_reg_sd3_vmmc: sd3vmmcgrp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059
+		>;
+	};
+
+	pinctrl_usb_otg1_vbus: vbus1grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
+		>;
+	};
+
+	pinctrl_usb_otg2_vbus: vbus2grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
+		>;
+	};
+
+	pinctrl_reg_lcd_3v3: reglcd3v3grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
+		>;
+	};
+
+	pinctrl_reg_sd1_vmmc: sd1vmmcgrp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x13059
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp-100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130b9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp-200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130f9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x17059
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x17059
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x17059
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x17059
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x17059
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x17059
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x17059
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x17059
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x13059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170b9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170b9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170b9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170b9
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170b9
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170b9
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170b9
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170b9
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x130b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170f9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170f9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170f9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170f9
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170f9
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170f9
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170f9
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170f9
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x130f9
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x17061
+			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x13061
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x17061
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x17061
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x17061
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x17061
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170a1
+			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130a1
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x170a1
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x170a1
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x170a1
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x170a1
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170e9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130f9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x170e9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x170e9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x170e9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x170e9
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	 0x4001b8b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SLL_PAD_AUD_RXFS__I2C3_SCL  0x4041b8b1
+			MX6SLL_PAD_AUD_RXC__I2C3_SDA   0x4041b8b1
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_DATA00__LCD_DATA00	0x79
+			MX6SLL_PAD_LCD_DATA01__LCD_DATA01	0x79
+			MX6SLL_PAD_LCD_DATA02__LCD_DATA02	0x79
+			MX6SLL_PAD_LCD_DATA03__LCD_DATA03	0x79
+			MX6SLL_PAD_LCD_DATA04__LCD_DATA04	0x79
+			MX6SLL_PAD_LCD_DATA05__LCD_DATA05	0x79
+			MX6SLL_PAD_LCD_DATA06__LCD_DATA06	0x79
+			MX6SLL_PAD_LCD_DATA07__LCD_DATA07	0x79
+			MX6SLL_PAD_LCD_DATA08__LCD_DATA08	0x79
+			MX6SLL_PAD_LCD_DATA09__LCD_DATA09	0x79
+			MX6SLL_PAD_LCD_DATA10__LCD_DATA10	0x79
+			MX6SLL_PAD_LCD_DATA11__LCD_DATA11	0x79
+			MX6SLL_PAD_LCD_DATA12__LCD_DATA12	0x79
+			MX6SLL_PAD_LCD_DATA13__LCD_DATA13	0x79
+			MX6SLL_PAD_LCD_DATA14__LCD_DATA14	0x79
+			MX6SLL_PAD_LCD_DATA15__LCD_DATA15	0x79
+			MX6SLL_PAD_LCD_DATA16__LCD_DATA16	0x79
+			MX6SLL_PAD_LCD_DATA17__LCD_DATA17	0x79
+			MX6SLL_PAD_LCD_DATA18__LCD_DATA18	0x79
+			MX6SLL_PAD_LCD_DATA19__LCD_DATA19	0x79
+			MX6SLL_PAD_LCD_DATA20__LCD_DATA20	0x79
+			MX6SLL_PAD_LCD_DATA21__LCD_DATA21	0x79
+			MX6SLL_PAD_LCD_DATA22__LCD_DATA22	0x79
+			MX6SLL_PAD_LCD_DATA23__LCD_DATA23	0x79
+			MX6SLL_PAD_LCD_CLK__LCD_CLK		0x79
+			MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE	0x79
+			MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX6SLL_PAD_LCD_RESET__LCD_RESET		0x79
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04	0x17059
+		>;
+	};
+
+	pinctrl_pwm1: pmw1grp {
+		fsl,pins = <
+			MX6SLL_PAD_PWM1__PWM1_OUT   0x110b0
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp	{
+		fsl,pins = <
+			MX6SLL_PAD_WDOG_B__WDOG1_B   0x170b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts
new file mode 100644
index 0000000000000..c7cfe0b70f04e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Kobo Clara HD ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K00+4A4
+ * Serials start with: E60K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Kobo Clara HD ebook reader it is an i.MX6SLL
+ *
+ * Copyright 2019 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sll.dtsi"
+#include "e60k02.dtsi"
+
+/ {
+	model = "Kobo Clara HD";
+	compatible = "kobo,clarahd", "fsl,imx6sll";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+	arm-supply = <&dcdc3_reg>;
+	soc-supply = <&dcdc1_reg>;
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                0x17059 /* TP_INT */
+			MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                0x10059 /* TP_RST */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_DATA1__GPIO5_IO08	0x17059	/* PWR_SW */
+			MX6SLL_PAD_SD1_DATA4__GPIO5_IO12	0x17059	/* HALL_EN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_DATA00__GPIO2_IO20	0x79
+			MX6SLL_PAD_LCD_DATA01__GPIO2_IO21	0x79
+			MX6SLL_PAD_LCD_DATA02__GPIO2_IO22	0x79
+			MX6SLL_PAD_LCD_DATA03__GPIO2_IO23	0x79
+			MX6SLL_PAD_LCD_DATA04__GPIO2_IO24	0x79
+			MX6SLL_PAD_LCD_DATA05__GPIO2_IO25	0x79
+			MX6SLL_PAD_LCD_DATA06__GPIO2_IO26	0x79
+			MX6SLL_PAD_LCD_DATA07__GPIO2_IO27	0x79
+			MX6SLL_PAD_LCD_DATA08__GPIO2_IO28	0x79
+			MX6SLL_PAD_LCD_DATA09__GPIO2_IO29	0x79
+			MX6SLL_PAD_LCD_DATA10__GPIO2_IO30	0x79
+			MX6SLL_PAD_LCD_DATA11__GPIO2_IO31	0x79
+			MX6SLL_PAD_LCD_DATA12__GPIO3_IO00	0x79
+			MX6SLL_PAD_LCD_DATA13__GPIO3_IO01	0x79
+			MX6SLL_PAD_LCD_DATA14__GPIO3_IO02	0x79
+			MX6SLL_PAD_LCD_DATA15__GPIO3_IO03	0x79
+			MX6SLL_PAD_LCD_DATA16__GPIO3_IO04	0x79
+			MX6SLL_PAD_LCD_DATA17__GPIO3_IO05	0x79
+			MX6SLL_PAD_LCD_DATA18__GPIO3_IO06	0x79
+			MX6SLL_PAD_LCD_DATA19__GPIO3_IO07	0x79
+			MX6SLL_PAD_LCD_DATA20__GPIO3_IO08	0x79
+			MX6SLL_PAD_LCD_DATA21__GPIO3_IO09	0x79
+			MX6SLL_PAD_LCD_DATA22__GPIO3_IO10	0x79
+			MX6SLL_PAD_LCD_DATA23__GPIO3_IO11	0x79
+			MX6SLL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SLL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SLL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SLL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+			MX6SLL_PAD_KEY_COL5__GPIO4_IO02		0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	0x4001f8b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	0x400108b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL	0x4001f8b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA	0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL	0x400108b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA	0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
+			MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x17059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10	0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CLK__GPIO5_IO15	0x1b8b1 /* ricoh619 chg */
+			MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */
+			MX6SLL_PAD_KEY_COL2__GPIO3_IO28	0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX 0x1b0b1
+			MX6SLL_PAD_KEY_COL6__UART4_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x17059
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x17059
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x17059
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170b9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170b9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170b9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170f9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170f9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170f9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SLL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SLL_PAD_SD2_DATA0__GPIO5_IO01	0x100f9
+			MX6SLL_PAD_SD2_DATA1__GPIO4_IO30	0x100f9
+			MX6SLL_PAD_SD2_DATA2__GPIO5_IO03	0x100f9
+			MX6SLL_PAD_SD2_DATA3__GPIO4_IO28	0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x11059
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x11059
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x11059
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170b9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170b9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170b9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170f9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170f9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170f9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SLL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SLL_PAD_SD3_DATA0__GPIO5_IO19	0x100c1
+			MX6SLL_PAD_SD3_DATA1__GPIO5_IO20	0x100c1
+			MX6SLL_PAD_SD3_DATA2__GPIO5_IO16	0x100c1
+			MX6SLL_PAD_SD3_DATA3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA6__GPIO4_IO29	0x10059		/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA7__GPIO5_IO00	0x10059		/* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts
new file mode 100644
index 0000000000000..7e4f38dd11e20
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Kobo Libra H2O ebook reader
+ *
+ * Name on mainboard is: 37NB-E70K0M+6A3
+ * Serials start with: E70K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Kobo Libra H2O ebook reader it is an i.MX6SLL
+ *
+ * Copyright 2021 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sll.dtsi"
+#include "e70k02.dtsi"
+
+/ {
+	model = "Kobo Libra H2O";
+	compatible = "kobo,librah2o", "fsl,imx6sll";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+	arm-supply = <&dcdc3_reg>;
+	soc-supply = <&dcdc1_reg>;
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24	0x17059 /* TP_INT */
+			MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18	0x10059 /* TP_RST */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25	0x17059	/* PWR_SW */
+			MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23	0x17059	/* HALL_EN */
+			MX6SLL_PAD_KEY_COL4__GPIO4_IO00		0x17059	/* PAGE_UP */
+			MX6SLL_PAD_KEY_COL5__GPIO4_IO02		0x17059	/* PAGE_DOWN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_DATA01__GPIO2_IO21	0x79
+			MX6SLL_PAD_LCD_DATA04__GPIO2_IO24	0x79
+			MX6SLL_PAD_LCD_DATA05__GPIO2_IO25	0x79
+			MX6SLL_PAD_LCD_DATA06__GPIO2_IO26	0x79
+			MX6SLL_PAD_LCD_DATA07__GPIO2_IO27	0x79
+			MX6SLL_PAD_LCD_DATA08__GPIO2_IO28	0x79
+			MX6SLL_PAD_LCD_DATA09__GPIO2_IO29	0x79
+			MX6SLL_PAD_LCD_DATA10__GPIO2_IO30	0x79
+			MX6SLL_PAD_LCD_DATA11__GPIO2_IO31	0x79
+			MX6SLL_PAD_LCD_DATA12__GPIO3_IO00	0x79
+			MX6SLL_PAD_LCD_DATA13__GPIO3_IO01	0x79
+			MX6SLL_PAD_LCD_DATA14__GPIO3_IO02	0x79
+			MX6SLL_PAD_LCD_DATA15__GPIO3_IO03	0x79
+			MX6SLL_PAD_LCD_DATA16__GPIO3_IO04	0x79
+			MX6SLL_PAD_LCD_DATA17__GPIO3_IO05	0x79
+			MX6SLL_PAD_LCD_DATA18__GPIO3_IO06	0x79
+			MX6SLL_PAD_LCD_DATA19__GPIO3_IO07	0x79
+			MX6SLL_PAD_LCD_DATA20__GPIO3_IO08	0x79
+			MX6SLL_PAD_LCD_DATA21__GPIO3_IO09	0x79
+			MX6SLL_PAD_LCD_DATA22__GPIO3_IO10	0x79
+			MX6SLL_PAD_LCD_DATA23__GPIO3_IO11	0x79
+			MX6SLL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SLL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21	0x79
+			MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26	0x79
+			MX6SLL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SLL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL   0x4001f8b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA   0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL   0x400108b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA   0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL   0x4001f8b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA   0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL   0x400108b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA   0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
+			MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17	0x10059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10   0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20	0x1b8b1 /* ricoh619 chg */
+			MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19	0x1b8b1 /* ricoh619 irq */
+			MX6SLL_PAD_KEY_COL2__GPIO3_IO28		0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x17059
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x17059
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x17059
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x17059
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x170b9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x170b9
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x170b9
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x170b9
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x170f9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x170b9
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x170b9
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x170b9
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x10059
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x10059
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x10059
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x10059
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x10059
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x10059
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x10059
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x10059
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x10059
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x10059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x11059
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x11059
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x11059
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170b9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170b9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170b9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170f9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170f9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170f9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SLL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SLL_PAD_SD3_DATA0__GPIO5_IO19	0x100c1
+			MX6SLL_PAD_SD3_DATA1__GPIO5_IO20	0x100c1
+			MX6SLL_PAD_SD3_DATA2__GPIO5_IO16	0x100c1
+			MX6SLL_PAD_SD3_DATA3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA6__GPIO4_IO29	0x10059	 /* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA7__GPIO5_IO00	0x10059	 /* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6sll-pinfunc.h
new file mode 100644
index 0000000000000..713a346f4c891
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-pinfunc.h
@@ -0,0 +1,880 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+#ifndef __DTS_IMX6SLL_PINFUNC_H
+#define __DTS_IMX6SLL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SLL_PAD_WDOG_B__WDOG1_B                                0x0014 0x02DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB                      0x0014 0x02DC 0x0000 0x1 0x0
+#define MX6SLL_PAD_WDOG_B__UART5_RI_B                             0x0014 0x02DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_WDOG_B__GPIO3_IO18                             0x0014 0x02DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M               0x0018 0x02E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL                          0x0018 0x02E0 0x068C 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT                          0x0018 0x02E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID                       0x0018 0x02E0 0x0560 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY                    0x0018 0x02E0 0x05AC 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21                        0x0018 0x02E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__SD3_WP                            0x0018 0x02E0 0x0794 0x6 0x0
+#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K               0x001C 0x02E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA                          0x001C 0x02E4 0x0690 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT                          0x001C 0x02E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID                       0x001C 0x02E4 0x055C 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL                          0x001C 0x02E4 0x0000 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22                        0x001C 0x02E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B                          0x001C 0x02E4 0x0780 0x6 0x0
+#define MX6SLL_PAD_PWM1__PWM1_OUT                                 0x0020 0x02E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_PWM1__CCM_CLKO                                 0x0020 0x02E8 0x0000 0x1 0x0
+#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT                            0x0020 0x02E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_PWM1__CSI_MCLK                                 0x0020 0x02E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_PWM1__GPIO3_IO23                               0x0020 0x02E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_PWM1__EPIT1_OUT                                0x0020 0x02E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL0__KEY_COL0                             0x0024 0x02EC 0x06A0 0x0 0x0
+#define MX6SLL_PAD_KEY_COL0__I2C2_SCL                             0x0024 0x02EC 0x0684 0x1 0x0
+#define MX6SLL_PAD_KEY_COL0__LCD_DATA00                           0x0024 0x02EC 0x06D8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL0__SD1_CD_B                             0x0024 0x02EC 0x0770 0x4 0x1
+#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24                           0x0024 0x02EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0                             0x0028 0x02F0 0x06C0 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA                             0x0028 0x02F0 0x0688 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01                           0x0028 0x02F0 0x06DC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW0__SD1_WP                               0x0028 0x02F0 0x0774 0x4 0x1
+#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25                           0x0028 0x02F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL1__KEY_COL1                             0x002C 0x02F4 0x06A4 0x0 0x0
+#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI                          0x002C 0x02F4 0x0658 0x1 0x1
+#define MX6SLL_PAD_KEY_COL1__LCD_DATA02                           0x002C 0x02F4 0x06E0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL1__SD3_DATA4                            0x002C 0x02F4 0x0784 0x4 0x0
+#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26                           0x002C 0x02F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1                             0x0030 0x02F8 0x06C4 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO                          0x0030 0x02F8 0x0654 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03                           0x0030 0x02F8 0x06E4 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD                            0x0030 0x02F8 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5                            0x0030 0x02F8 0x0788 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27                           0x0030 0x02F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL2__KEY_COL2                             0x0034 0x02FC 0x06A8 0x0 0x0
+#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0                           0x0034 0x02FC 0x065C 0x1 0x1
+#define MX6SLL_PAD_KEY_COL2__LCD_DATA04                           0x0034 0x02FC 0x06E8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL2__CSI_DATA12                           0x0034 0x02FC 0x05B8 0x3 0x1
+#define MX6SLL_PAD_KEY_COL2__SD3_DATA6                            0x0034 0x02FC 0x078C 0x4 0x0
+#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28                           0x0034 0x02FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2                             0x0038 0x0300 0x06C8 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK                          0x0038 0x0300 0x0650 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05                           0x0038 0x0300 0x06EC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13                           0x0038 0x0300 0x05BC 0x3 0x1
+#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7                            0x0038 0x0300 0x0790 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29                           0x0038 0x0300 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__KEY_COL3                             0x003C 0x0304 0x06AC 0x0 0x0
+#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS                            0x003C 0x0304 0x05A0 0x1 0x1
+#define MX6SLL_PAD_KEY_COL3__LCD_DATA06                           0x003C 0x0304 0x06F0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL3__CSI_DATA14                           0x003C 0x0304 0x05C0 0x3 0x1
+#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30                           0x003C 0x0304 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__SD1_RESET                            0x003C 0x0304 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3                             0x0040 0x0308 0x06CC 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC                             0x0040 0x0308 0x059C 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07                           0x0040 0x0308 0x06F4 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15                           0x0040 0x0308 0x05C4 0x3 0x2
+#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31                           0x0040 0x0308 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT                          0x0040 0x0308 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL4__KEY_COL4                             0x0044 0x030C 0x06B0 0x0 0x1
+#define MX6SLL_PAD_KEY_COL4__AUD6_RXD                             0x0044 0x030C 0x0594 0x1 0x1
+#define MX6SLL_PAD_KEY_COL4__LCD_DATA08                           0x0044 0x030C 0x06F8 0x2 0x1
+#define MX6SLL_PAD_KEY_COL4__CSI_DATA16                           0x0044 0x030C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00                           0x0044 0x030C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR                         0x0044 0x030C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4                             0x0048 0x0310 0x06D0 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC                             0x0048 0x0310 0x05A4 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09                           0x0048 0x0310 0x06FC 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17                           0x0048 0x0310 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01                           0x0048 0x0310 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC                          0x0048 0x0310 0x076C 0x6 0x2
+#define MX6SLL_PAD_KEY_COL5__KEY_COL5                             0x004C 0x0314 0x0694 0x0 0x1
+#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS                            0x004C 0x0314 0x05A8 0x1 0x1
+#define MX6SLL_PAD_KEY_COL5__LCD_DATA10                           0x004C 0x0314 0x0700 0x2 0x0
+#define MX6SLL_PAD_KEY_COL5__CSI_DATA18                           0x004C 0x0314 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02                           0x004C 0x0314 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR                         0x004C 0x0314 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5                             0x0050 0x0318 0x06B4 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD                             0x0050 0x0318 0x0598 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11                           0x0050 0x0318 0x0704 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19                           0x0050 0x0318 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03                           0x0050 0x0318 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC                          0x0050 0x0318 0x0768 0x6 0x3
+#define MX6SLL_PAD_KEY_COL6__KEY_COL6                             0x0054 0x031C 0x0698 0x0 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX                         0x0054 0x031C 0x075C 0x1 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX                         0x0054 0x031C 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL6__LCD_DATA12                           0x0054 0x031C 0x0708 0x2 0x1
+#define MX6SLL_PAD_KEY_COL6__CSI_DATA20                           0x0054 0x031C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04                           0x0054 0x031C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL6__SD3_RESET                            0x0054 0x031C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6                             0x0058 0x0320 0x06B8 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX                         0x0058 0x0320 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX                         0x0058 0x0320 0x075C 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13                           0x0058 0x0320 0x070C 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21                           0x0058 0x0320 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05                           0x0058 0x0320 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT                          0x0058 0x0320 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL7__KEY_COL7                             0x005C 0x0324 0x069C 0x0 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS                        0x005C 0x0324 0x0758 0x1 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS                        0x005C 0x0324 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL7__LCD_DATA14                           0x005C 0x0324 0x0710 0x2 0x1
+#define MX6SLL_PAD_KEY_COL7__CSI_DATA22                           0x005C 0x0324 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06                           0x005C 0x0324 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL7__SD1_WP                               0x005C 0x0324 0x0774 0x6 0x3
+#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7                             0x0060 0x0328 0x06BC 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS                        0x0060 0x0328 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS                        0x0060 0x0328 0x0758 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15                           0x0060 0x0328 0x0714 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23                           0x0060 0x0328 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07                           0x0060 0x0328 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B                             0x0060 0x0328 0x0770 0x6 0x3
+#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00                       0x0064 0x032C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI                       0x0064 0x032C 0x0658 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24                        0x0064 0x032C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00                        0x0064 0x032C 0x05C8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07                        0x0064 0x032C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01                       0x0068 0x0330 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO                       0x0068 0x0330 0x0654 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25                        0x0068 0x0330 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01                        0x0068 0x0330 0x05CC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08                        0x0068 0x0330 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02                       0x006C 0x0334 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0                        0x006C 0x0334 0x065C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26                        0x006C 0x0334 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02                        0x006C 0x0334 0x05D0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09                        0x006C 0x0334 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03                       0x0070 0x0338 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK                       0x0070 0x0338 0x0650 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27                        0x0070 0x0338 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03                        0x0070 0x0338 0x05D4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10                        0x0070 0x0338 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04                       0x0074 0x033C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1                        0x0074 0x033C 0x0660 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28                        0x0074 0x033C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04                        0x0074 0x033C 0x05D8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11                        0x0074 0x033C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05                       0x0078 0x0340 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2                        0x0078 0x0340 0x0664 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29                        0x0078 0x0340 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05                        0x0078 0x0340 0x05DC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12                        0x0078 0x0340 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06                       0x007C 0x0344 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3                        0x007C 0x0344 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30                        0x007C 0x0344 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06                        0x007C 0x0344 0x05E0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13                        0x007C 0x0344 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07                       0x0080 0x0348 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY                        0x0080 0x0348 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31                        0x0080 0x0348 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07                        0x0080 0x0348 0x05E4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14                        0x0080 0x0348 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08                       0x0084 0x034C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI                       0x0084 0x034C 0x063C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0                    0x0084 0x034C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15                        0x0084 0x034C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09                       0x0088 0x0350 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO                       0x0088 0x0350 0x0638 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1                    0x0088 0x0350 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16                        0x0088 0x0350 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10                       0x008C 0x0354 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0                        0x008C 0x0354 0x0648 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2                    0x008C 0x0354 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17                        0x008C 0x0354 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11                       0x0090 0x0358 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK                       0x0090 0x0358 0x0630 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3                    0x0090 0x0358 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18                        0x0090 0x0358 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12                       0x0094 0x035C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX                      0x0094 0x035C 0x074C 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX                      0x0094 0x035C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM                      0x0094 0x035C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19                        0x0094 0x035C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1                        0x0094 0x035C 0x064C 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13                       0x0098 0x0360 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX                      0x0098 0x0360 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX                      0x0098 0x0360 0x074C 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ                      0x0098 0x0360 0x0668 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20                        0x0098 0x0360 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2                        0x0098 0x0360 0x0640 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14                       0x009C 0x0364 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS                     0x009C 0x0364 0x0748 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS                     0x009C 0x0364 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT                     0x009C 0x0364 0x066C 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21                        0x009C 0x0364 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3                        0x009C 0x0364 0x0644 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15                       0x00A0 0x0368 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS                     0x00A0 0x0368 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS                     0x00A0 0x0368 0x0748 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE                     0x00A0 0x0368 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22                        0x00A0 0x0368 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY                        0x00A0 0x0368 0x0634 0x6 0x1
+#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P                       0x00A4 0x036C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI                        0x00A4 0x036C 0x0624 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL                           0x00A4 0x036C 0x0684 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08                         0x00A4 0x036C 0x05E8 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23                         0x00A4 0x036C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE                           0x00A8 0x0370 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO                         0x00A8 0x0370 0x0620 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA                            0x00A8 0x0370 0x0688 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09                          0x00A8 0x0370 0x05EC 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24                          0x00A8 0x0370 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE                           0x00AC 0x0374 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0                          0x00AC 0x0374 0x0628 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10                          0x00AC 0x0374 0x05B0 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25                          0x00AC 0x0374 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR                         0x00B0 0x0378 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK                        0x00B0 0x0378 0x061C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4                         0x00B0 0x0378 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11                         0x00B0 0x0378 0x05B4 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26                         0x00B0 0x0378 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0                         0x00B4 0x037C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1                         0x00B4 0x037C 0x062C 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT                           0x00B4 0x037C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27                         0x00B4 0x037C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1                         0x00B8 0x0380 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B                            0x00B8 0x0380 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT                           0x00B8 0x0380 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28                         0x00B8 0x0380 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2                         0x00BC 0x0384 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL                           0x00BC 0x0384 0x068C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT                           0x00BC 0x0384 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29                         0x00BC 0x0384 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3                         0x00C0 0x0388 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA                           0x00C0 0x0388 0x0690 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT                           0x00C0 0x0388 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30                         0x00C0 0x0388 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK                         0x00C4 0x038C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2                         0x00C4 0x038C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK                         0x00C4 0x038C 0x05F4 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31                         0x00C4 0x038C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET                          0x00C4 0x038C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE                           0x00C8 0x0390 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3                          0x00C8 0x0390 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC                           0x00C8 0x0390 0x05F0 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00                          0x00C8 0x0390 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT                         0x00C8 0x0390 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL                           0x00CC 0x0394 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY                          0x00CC 0x0394 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK                            0x00CC 0x0394 0x0000 0x3 0x0
+#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01                          0x00CC 0x0394 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDRL__SD2_WP                              0x00CC 0x0394 0x077C 0x6 0x2
+#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP                           0x00D0 0x0398 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT                            0x00D0 0x0398 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC                           0x00D0 0x0398 0x05F8 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02                          0x00D0 0x0398 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B                            0x00D0 0x0398 0x0778 0x6 0x2
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0                         0x00D4 0x039C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS                          0x00D4 0x039C 0x0588 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX                       0x00D4 0x039C 0x0754 0x2 0x4
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX                       0x00D4 0x039C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03                         0x00D4 0x039C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5                         0x00D4 0x039C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1                         0x00D8 0x03A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD                           0x00D8 0x03A0 0x057C 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX                       0x00D8 0x03A0 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX                       0x00D8 0x03A0 0x0754 0x2 0x5
+#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04                         0x00D8 0x03A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6                         0x00D8 0x03A0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0                           0x00DC 0x03A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS                       0x00DC 0x03A4 0x0750 0x2 0x2
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS                       0x00DC 0x03A4 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05                          0x00DC 0x03A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7                          0x00DC 0x03A4 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1                           0x00E0 0x03A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS                       0x00E0 0x03A8 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS                       0x00E0 0x03A8 0x0750 0x2 0x3
+#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06                          0x00E0 0x03A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8                          0x00E0 0x03A8 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0                 0x00E4 0x03AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC                       0x00E4 0x03AC 0x0584 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16                     0x00E4 0x03AC 0x0718 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07                     0x00E4 0x03AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1                 0x00E8 0x03B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS                      0x00E8 0x03B0 0x0590 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17                     0x00E8 0x03B0 0x071C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08                     0x00E8 0x03B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2                 0x00EC 0x03B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD                       0x00EC 0x03B4 0x0580 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18                     0x00EC 0x03B4 0x0720 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09                     0x00EC 0x03B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3                 0x00F0 0x03B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC                       0x00F0 0x03B8 0x058C 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19                     0x00F0 0x03B8 0x0724 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10                     0x00F0 0x03B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM                     0x00F4 0x03BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20                       0x00F4 0x03BC 0x0728 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID                      0x00F4 0x03BC 0x055C 0x4 0x4
+#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11                       0x00F4 0x03BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET                        0x00F4 0x03BC 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ                     0x00F8 0x03C0 0x0668 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21                       0x00F8 0x03C0 0x072C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID                      0x00F8 0x03C0 0x0560 0x4 0x3
+#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12                       0x00F8 0x03C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT                      0x00F8 0x03C0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                   0x00FC 0x03C4 0x066C 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22                      0x00FC 0x03C4 0x0730 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI                      0x00FC 0x03C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13                      0x00FC 0x03C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP                          0x00FC 0x03C4 0x0794 0x6 0x2
+#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE                   0x0100 0x03C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23                      0x0100 0x03C8 0x0734 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO                      0x0100 0x03C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14                      0x0100 0x03C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B                        0x0100 0x03C8 0x0780 0x6 0x2
+#define MX6SLL_PAD_LCD_CLK__LCD_CLK                               0x0104 0x03CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN                            0x0104 0x03CC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_CLK__PWM4_OUT                              0x0104 0x03CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15                            0x0104 0x03CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE                         0x0108 0x03D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E                           0x0108 0x03D0 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16                         0x0108 0x03D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC                           0x010C 0x03D4 0x06D4 0x0 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_CS                              0x010C 0x03D4 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX                        0x010C 0x03D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX                        0x010C 0x03D4 0x074C 0x4 0x1
+#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17                          0x010C 0x03D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK                       0x010C 0x03D4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC                           0x0110 0x03D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_RS                              0x0110 0x03D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS                       0x0110 0x03D8 0x0748 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS                       0x0110 0x03D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18                          0x0110 0x03D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL                       0x0110 0x03D8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_RESET                           0x0114 0x03DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_BUSY                            0x0114 0x03DC 0x06D4 0x2 0x1
+#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS                       0x0114 0x03DC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS                       0x0114 0x03DC 0x0748 0x4 0x1
+#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19                          0x0114 0x03DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY                      0x0114 0x03DC 0x05AC 0x6 0x2
+#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00                         0x0118 0x03E0 0x06D8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI                        0x0118 0x03E0 0x0608 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID                        0x0118 0x03E0 0x0560 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT                           0x0118 0x03E0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B                        0x0118 0x03E0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20                         0x0118 0x03E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00                        0x0118 0x03E0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00                     0x0118 0x03E0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01                         0x011C 0x03E4 0x06DC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO                        0x011C 0x03E4 0x0604 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID                        0x011C 0x03E4 0x055C 0x2 0x3
+#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT                           0x011C 0x03E4 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS                          0x011C 0x03E4 0x0570 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21                         0x011C 0x03E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01                        0x011C 0x03E4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01                     0x011C 0x03E4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02                         0x0120 0x03E8 0x06E0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0                         0x0120 0x03E8 0x0614 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT                          0x0120 0x03E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT                           0x0120 0x03E8 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC                           0x0120 0x03E8 0x056C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22                         0x0120 0x03E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02                        0x0120 0x03E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02                     0x0120 0x03E8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03                         0x0124 0x03EC 0x06E4 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK                        0x0124 0x03EC 0x05FC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B                        0x0124 0x03EC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT                           0x0124 0x03EC 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD                           0x0124 0x03EC 0x0564 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23                         0x0124 0x03EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03                        0x0124 0x03EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03                     0x0124 0x03EC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04                         0x0128 0x03F0 0x06E8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1                         0x0128 0x03F0 0x060C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC                          0x0128 0x03F0 0x05F8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB                  0x0128 0x03F0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC                           0x0128 0x03F0 0x0574 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24                         0x0128 0x03F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04                        0x0128 0x03F0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04                     0x0128 0x03F0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05                         0x012C 0x03F4 0x06EC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2                         0x012C 0x03F4 0x0610 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC                          0x012C 0x03F4 0x05F0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS                          0x012C 0x03F4 0x0578 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25                         0x012C 0x03F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05                        0x012C 0x03F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05                     0x012C 0x03F4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06                         0x0130 0x03F8 0x06F0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3                         0x0130 0x03F8 0x0618 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK                         0x0130 0x03F8 0x05F4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD                           0x0130 0x03F8 0x0568 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26                         0x0130 0x03F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06                        0x0130 0x03F8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06                     0x0130 0x03F8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07                         0x0134 0x03FC 0x06F4 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY                         0x0134 0x03FC 0x0600 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK                           0x0134 0x03FC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT                      0x0134 0x03FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27                         0x0134 0x03FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07                        0x0134 0x03FC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07                     0x0134 0x03FC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08                         0x0138 0x0400 0x06F8 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA08__KEY_COL0                           0x0138 0x0400 0x06A0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09                         0x0138 0x0400 0x05EC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK                        0x0138 0x0400 0x061C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28                         0x0138 0x0400 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08                        0x0138 0x0400 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08                     0x0138 0x0400 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09                         0x013C 0x0404 0x06FC 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0                           0x013C 0x0404 0x06C0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08                         0x013C 0x0404 0x05E8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI                        0x013C 0x0404 0x0624 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29                         0x013C 0x0404 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09                        0x013C 0x0404 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09                     0x013C 0x0404 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10                         0x0140 0x0408 0x0700 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA10__KEY_COL1                           0x0140 0x0408 0x06A4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07                         0x0140 0x0408 0x05E4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO                        0x0140 0x0408 0x0620 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30                         0x0140 0x0408 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10                        0x0140 0x0408 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10                     0x0140 0x0408 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11                         0x0144 0x040C 0x0704 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1                           0x0144 0x040C 0x06C4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06                         0x0144 0x040C 0x05E0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1                         0x0144 0x040C 0x062C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31                         0x0144 0x040C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11                        0x0144 0x040C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11                     0x0144 0x040C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12                         0x0148 0x0410 0x0708 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA12__KEY_COL2                           0x0148 0x0410 0x06A8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05                         0x0148 0x0410 0x05DC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS                      0x0148 0x0410 0x0760 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS                      0x0148 0x0410 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00                         0x0148 0x0410 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12                        0x0148 0x0410 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12                     0x0148 0x0410 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13                         0x014C 0x0414 0x070C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2                           0x014C 0x0414 0x06C8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04                         0x014C 0x0414 0x05D8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS                      0x014C 0x0414 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS                      0x014C 0x0414 0x0760 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01                         0x014C 0x0414 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13                        0x014C 0x0414 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13                     0x014C 0x0414 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14                         0x0150 0x0418 0x0710 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA14__KEY_COL3                           0x0150 0x0418 0x06AC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03                         0x0150 0x0418 0x05D4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX                       0x0150 0x0418 0x0764 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX                       0x0150 0x0418 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02                         0x0150 0x0418 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14                        0x0150 0x0418 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14                     0x0150 0x0418 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15                         0x0154 0x041C 0x0714 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3                           0x0154 0x041C 0x06CC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02                         0x0154 0x041C 0x05D0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX                       0x0154 0x041C 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX                       0x0154 0x041C 0x0764 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03                         0x0154 0x041C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15                        0x0154 0x041C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15                     0x0154 0x041C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16                         0x0158 0x0420 0x0718 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA16__KEY_COL4                           0x0158 0x0420 0x06B0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01                         0x0158 0x0420 0x05CC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL                           0x0158 0x0420 0x0684 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04                         0x0158 0x0420 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24                     0x0158 0x0420 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17                         0x015C 0x0424 0x071C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4                           0x015C 0x0424 0x06D0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00                         0x015C 0x0424 0x05C8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA                           0x015C 0x0424 0x0688 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05                         0x015C 0x0424 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25                     0x015C 0x0424 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18                         0x0160 0x0428 0x0720 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA18__KEY_COL5                           0x0160 0x0428 0x0694 0x1 0x2
+#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15                         0x0160 0x0428 0x05C4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1                       0x0160 0x0428 0x0670 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06                         0x0160 0x0428 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26                     0x0160 0x0428 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19                         0x0164 0x042C 0x0724 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5                           0x0164 0x042C 0x06B4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14                         0x0164 0x042C 0x05C0 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2                       0x0164 0x042C 0x0674 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07                         0x0164 0x042C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27                     0x0164 0x042C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20                         0x0168 0x0430 0x0728 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA20__KEY_COL6                           0x0168 0x0430 0x0698 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13                         0x0168 0x0430 0x05BC 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1                       0x0168 0x0430 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08                         0x0168 0x0430 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28                     0x0168 0x0430 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21                         0x016C 0x0434 0x072C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6                           0x016C 0x0434 0x06B8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12                         0x016C 0x0434 0x05B8 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2                       0x016C 0x0434 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09                         0x016C 0x0434 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29                     0x016C 0x0434 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22                         0x0170 0x0438 0x0730 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA22__KEY_COL7                           0x0170 0x0438 0x069C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11                         0x0170 0x0438 0x05B4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3                       0x0170 0x0438 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10                         0x0170 0x0438 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30                     0x0170 0x0438 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23                         0x0174 0x043C 0x0734 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7                           0x0174 0x043C 0x06BC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10                         0x0174 0x043C 0x05B0 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN                          0x0174 0x043C 0x0678 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11                         0x0174 0x043C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31                     0x0174 0x043C 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS                            0x0178 0x0440 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL                             0x0178 0x0440 0x067C 0x1 0x1
+#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX                         0x0178 0x0440 0x0754 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX                         0x0178 0x0440 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL                             0x0178 0x0440 0x068C 0x4 0x1
+#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00                           0x0178 0x0440 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0                           0x0178 0x0440 0x0648 0x6 0x0
+#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND                           0x0178 0x0440 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXC__AUD3_RXC                              0x017C 0x0444 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXC__I2C1_SDA                              0x017C 0x0444 0x0680 0x1 0x1
+#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX                          0x017C 0x0444 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX                          0x017C 0x0444 0x0754 0x2 0x1
+#define MX6SLL_PAD_AUD_RXC__I2C3_SDA                              0x017C 0x0444 0x0690 0x4 0x1
+#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01                            0x017C 0x0444 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1                            0x017C 0x0444 0x064C 0x6 0x0
+#define MX6SLL_PAD_AUD_RXD__AUD3_RXD                              0x0180 0x0448 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI                           0x0180 0x0448 0x063C 0x1 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX                          0x0180 0x0448 0x075C 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX                          0x0180 0x0448 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__SD1_LCTL                              0x0180 0x0448 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02                            0x0180 0x0448 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXC__AUD3_TXC                              0x0184 0x044C 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO                           0x0184 0x044C 0x0638 0x1 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX                          0x0184 0x044C 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX                          0x0184 0x044C 0x075C 0x2 0x1
+#define MX6SLL_PAD_AUD_TXC__SD2_LCTL                              0x0184 0x044C 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03                            0x0184 0x044C 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS                            0x0188 0x0450 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT                             0x0188 0x0450 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS                        0x0188 0x0450 0x0758 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS                        0x0188 0x0450 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL                             0x0188 0x0450 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04                           0x0188 0x0450 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXD__AUD3_TXD                              0x018C 0x0454 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK                           0x018C 0x0454 0x0630 0x1 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS                         0x018C 0x0454 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS                         0x018C 0x0454 0x0758 0x2 0x1
+#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05                            0x018C 0x0454 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT                        0x0190 0x0458 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT                             0x0190 0x0458 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY                           0x0190 0x0458 0x0634 0x2 0x0
+#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB                    0x0190 0x0458 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06                           0x0190 0x0458 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK                        0x0190 0x0458 0x073C 0x6 0x1
+#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX                        0x0194 0x045C 0x0744 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX                        0x0194 0x045C 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__PWM1_OUT                            0x0194 0x045C 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX                        0x0194 0x045C 0x075C 0x2 0x4
+#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX                        0x0194 0x045C 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX                        0x0194 0x045C 0x0764 0x4 0x6
+#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX                        0x0194 0x045C 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16                          0x0194 0x045C 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX                        0x0198 0x0460 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX                        0x0198 0x0460 0x0744 0x0 0x1
+#define MX6SLL_PAD_UART1_TXD__PWM2_OUT                            0x0198 0x0460 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX                        0x0198 0x0460 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX                        0x0198 0x0460 0x075C 0x2 0x5
+#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX                        0x0198 0x0460 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX                        0x0198 0x0460 0x0764 0x4 0x7
+#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17                          0x0198 0x0460 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B                         0x0198 0x0460 0x0000 0x7 0x0
+#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL                             0x019C 0x0464 0x067C 0x0 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS                        0x019C 0x0464 0x0740 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS                        0x019C 0x0464 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2                           0x019C 0x0464 0x0640 0x2 0x0
+#define MX6SLL_PAD_I2C1_SCL__SD3_RESET                            0x019C 0x0464 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12                           0x019C 0x0464 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1                           0x019C 0x0464 0x060C 0x6 0x0
+#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA                             0x01A0 0x0468 0x0680 0x0 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS                        0x01A0 0x0468 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS                        0x01A0 0x0468 0x0740 0x1 0x1
+#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3                           0x01A0 0x0468 0x0644 0x2 0x0
+#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT                          0x01A0 0x0468 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13                           0x01A0 0x0468 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2                           0x01A0 0x0468 0x0610 0x6 0x0
+#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL                             0x01A4 0x046C 0x0684 0x0 0x3
+#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS                            0x01A4 0x046C 0x0570 0x1 0x2
+#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN                             0x01A4 0x046C 0x0738 0x2 0x2
+#define MX6SLL_PAD_I2C2_SCL__SD3_WP                               0x01A4 0x046C 0x0794 0x4 0x3
+#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14                           0x01A4 0x046C 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY                           0x01A4 0x046C 0x0600 0x6 0x1
+#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA                             0x01A8 0x0470 0x0688 0x0 0x3
+#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC                             0x01A8 0x0470 0x056C 0x1 0x2
+#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT                            0x01A8 0x0470 0x0000 0x2 0x0
+#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B                             0x01A8 0x0470 0x0780 0x4 0x3
+#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15                           0x01A8 0x0470 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK                       0x01AC 0x0474 0x05FC 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD                          0x01AC 0x0474 0x0568 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX                      0x01AC 0x0474 0x0764 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX                      0x01AC 0x0474 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0                        0x01AC 0x0474 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET                         0x01AC 0x0474 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08                        0x01AC 0x0474 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC                       0x01AC 0x0474 0x0768 0x6 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI                       0x01B0 0x0478 0x0608 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC                          0x01B0 0x0478 0x0574 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX                      0x01B0 0x0478 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX                      0x01B0 0x0478 0x0764 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1                        0x01B0 0x0478 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT                       0x01B0 0x0478 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09                        0x01B0 0x0478 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO                       0x01B4 0x047C 0x0604 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS                         0x01B4 0x047C 0x0578 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS                     0x01B4 0x047C 0x0760 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS                     0x01B4 0x047C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0                         0x01B4 0x047C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP                            0x01B4 0x047C 0x077C 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10                        0x01B4 0x047C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0                         0x01B8 0x0480 0x0614 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD                           0x01B8 0x0480 0x0564 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS                      0x01B8 0x0480 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS                      0x01B8 0x0480 0x0760 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1                          0x01B8 0x0480 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B                           0x01B8 0x0480 0x0778 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11                         0x01B8 0x0480 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR                       0x01B8 0x0480 0x0000 0x6 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK                       0x01BC 0x0484 0x061C 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK                     0x01BC 0x0484 0x073C 0x1 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX                      0x01BC 0x0484 0x0754 0x2 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX                      0x01BC 0x0484 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK                        0x01BC 0x0484 0x05F4 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET                         0x01BC 0x0484 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12                        0x01BC 0x0484 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC                       0x01BC 0x0484 0x0768 0x6 0x2
+#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI                       0x01C0 0x0488 0x0624 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1                   0x01C0 0x0488 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX                      0x01C0 0x0488 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX                      0x01C0 0x0488 0x0754 0x2 0x3
+#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC                         0x01C0 0x0488 0x05F0 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT                       0x01C0 0x0488 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13                        0x01C0 0x0488 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO                       0x01C4 0x048C 0x0620 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0                   0x01C4 0x048C 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS                     0x01C4 0x048C 0x0750 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS                     0x01C4 0x048C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK                          0x01C4 0x048C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP                            0x01C4 0x048C 0x0774 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14                        0x01C4 0x048C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC                       0x01C4 0x048C 0x076C 0x6 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0                         0x01C8 0x0490 0x0628 0x0 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3                         0x01C8 0x0490 0x0618 0x1 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS                      0x01C8 0x0490 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS                      0x01C8 0x0490 0x0750 0x2 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC                          0x01C8 0x0490 0x05F8 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B                           0x01C8 0x0490 0x0770 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15                         0x01C8 0x0490 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR                       0x01C8 0x0490 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD1_CLK__SD1_CLK                               0x01CC 0x0494 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CLK__KEY_COL0                              0x01CC 0x0494 0x06A0 0x2 0x2
+#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4                            0x01CC 0x0494 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15                            0x01CC 0x0494 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_CMD__SD1_CMD                               0x01D0 0x0498 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CMD__KEY_ROW0                              0x01D0 0x0498 0x06C0 0x2 0x2
+#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5                            0x01D0 0x0498 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14                            0x01D0 0x0498 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0                           0x01D4 0x049C 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA0__KEY_COL1                            0x01D4 0x049C 0x06A4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6                          0x01D4 0x049C 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11                          0x01D4 0x049C 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1                           0x01D8 0x04A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1                            0x01D8 0x04A0 0x06C4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7                          0x01D8 0x04A0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08                          0x01D8 0x04A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2                           0x01DC 0x04A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA2__KEY_COL2                            0x01DC 0x04A4 0x06A8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8                          0x01DC 0x04A4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                          0x01DC 0x04A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3                           0x01E0 0x04A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2                            0x01E0 0x04A8 0x06C8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9                          0x01E0 0x04A8 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                          0x01E0 0x04A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4                           0x01E4 0x04AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA4__KEY_COL3                            0x01E4 0x04AC 0x06AC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N                        0x01E4 0x04AC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX                        0x01E4 0x04AC 0x075C 0x4 0x6
+#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX                        0x01E4 0x04AC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12                          0x01E4 0x04AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5                           0x01E8 0x04B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3                            0x01E8 0x04B0 0x06CC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED                          0x01E8 0x04B0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX                        0x01E8 0x04B0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX                        0x01E8 0x04B0 0x075C 0x4 0x7
+#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09                          0x01E8 0x04B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6                           0x01EC 0x04B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA6__KEY_COL4                            0x01EC 0x04B4 0x06B0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ                          0x01EC 0x04B4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS                       0x01EC 0x04B4 0x0758 0x4 0x4
+#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS                       0x01EC 0x04B4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07                          0x01EC 0x04B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7                           0x01F0 0x04B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4                            0x01F0 0x04B8 0x06D0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY                      0x01F0 0x04B8 0x05AC 0x3 0x3
+#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS                       0x01F0 0x04B8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS                       0x01F0 0x04B8 0x0758 0x4 0x5
+#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10                          0x01F0 0x04B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_RESET__SD2_RESET                           0x01F4 0x04BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_RESET__WDOG2_B                             0x01F4 0x04BC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT                           0x01F4 0x04BC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD2_RESET__CSI_MCLK                            0x01F4 0x04BC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27                          0x01F4 0x04BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CLK__SD2_CLK                               0x01F8 0x04C0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS                             0x01F8 0x04C0 0x0570 0x1 0x1
+#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK                           0x01F8 0x04C0 0x0630 0x2 0x1
+#define MX6SLL_PAD_SD2_CLK__CSI_DATA00                            0x01F8 0x04C0 0x05C8 0x3 0x1
+#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05                            0x01F8 0x04C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CMD__SD2_CMD                               0x01FC 0x04C4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CMD__AUD4_RXC                              0x01FC 0x04C4 0x056C 0x1 0x1
+#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0                            0x01FC 0x04C4 0x0648 0x2 0x1
+#define MX6SLL_PAD_SD2_CMD__CSI_DATA01                            0x01FC 0x04C4 0x05CC 0x3 0x1
+#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT                             0x01FC 0x04C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04                            0x01FC 0x04C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0                           0x0200 0x04C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD                            0x0200 0x04C8 0x0564 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI                         0x0200 0x04C8 0x063C 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02                          0x0200 0x04C8 0x05D0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS                       0x0200 0x04C8 0x0760 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS                       0x0200 0x04C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01                          0x0200 0x04C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1                           0x0204 0x04CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC                            0x0204 0x04CC 0x0574 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO                         0x0204 0x04CC 0x0638 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03                          0x0204 0x04CC 0x05D4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS                       0x0204 0x04CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS                       0x0204 0x04CC 0x0760 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30                          0x0204 0x04CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2                           0x0208 0x04D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS                           0x0208 0x04D0 0x0578 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04                          0x0208 0x04D0 0x05D8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX                        0x0208 0x04D0 0x0764 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX                        0x0208 0x04D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03                          0x0208 0x04D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3                           0x020C 0x04D4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD                            0x020C 0x04D4 0x0568 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05                          0x020C 0x04D4 0x05DC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX                        0x020C 0x04D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX                        0x020C 0x04D4 0x0764 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28                          0x020C 0x04D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4                           0x0210 0x04D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4                           0x0210 0x04D8 0x0784 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX                        0x0210 0x04D8 0x074C 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX                        0x0210 0x04D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06                          0x0210 0x04D8 0x05E0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT                           0x0210 0x04D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02                          0x0210 0x04D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5                           0x0214 0x04DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5                           0x0214 0x04DC 0x0788 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX                        0x0214 0x04DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX                        0x0214 0x04DC 0x074C 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07                          0x0214 0x04DC 0x05E4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN                            0x0214 0x04DC 0x0738 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31                          0x0214 0x04DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6                           0x0218 0x04E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6                           0x0218 0x04E0 0x078C 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS                       0x0218 0x04E0 0x0748 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS                       0x0218 0x04E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08                          0x0218 0x04E0 0x05E8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA6__SD2_WP                              0x0218 0x04E0 0x077C 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29                          0x0218 0x04E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7                           0x021C 0x04E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7                           0x021C 0x04E4 0x0790 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS                       0x021C 0x04E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS                       0x021C 0x04E4 0x0748 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09                          0x021C 0x04E4 0x05EC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B                            0x021C 0x04E4 0x0778 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00                          0x021C 0x04E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__SD3_CLK                               0x0220 0x04E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS                             0x0220 0x04E8 0x0588 0x1 0x0
+#define MX6SLL_PAD_SD3_CLK__KEY_COL5                              0x0220 0x04E8 0x0694 0x2 0x0
+#define MX6SLL_PAD_SD3_CLK__CSI_DATA10                            0x0220 0x04E8 0x05B0 0x3 0x0
+#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB                     0x0220 0x04E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18                            0x0220 0x04E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR                          0x0220 0x04E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_CMD__SD3_CMD                               0x0224 0x04EC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CMD__AUD5_RXC                              0x0224 0x04EC 0x0584 0x1 0x0
+#define MX6SLL_PAD_SD3_CMD__KEY_ROW5                              0x0224 0x04EC 0x06B4 0x2 0x0
+#define MX6SLL_PAD_SD3_CMD__CSI_DATA11                            0x0224 0x04EC 0x05B4 0x3 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID                           0x0224 0x04EC 0x0560 0x4 0x1
+#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21                            0x0224 0x04EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR                          0x0224 0x04EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0                           0x0228 0x04F0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD                            0x0228 0x04F0 0x057C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA0__KEY_COL6                            0x0228 0x04F0 0x0698 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12                          0x0228 0x04F0 0x05B8 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID                         0x0228 0x04F0 0x055C 0x4 0x1
+#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19                          0x0228 0x04F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1                           0x022C 0x04F4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC                            0x022C 0x04F4 0x058C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6                            0x022C 0x04F4 0x06B8 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13                          0x022C 0x04F4 0x05BC 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT                         0x022C 0x04F4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20                          0x022C 0x04F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B                           0x022C 0x04F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2                           0x0230 0x04F8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS                           0x0230 0x04F8 0x0590 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA2__KEY_COL7                            0x0230 0x04F8 0x069C 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14                          0x0230 0x04F8 0x05C0 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT                           0x0230 0x04F8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16                          0x0230 0x04F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC                         0x0230 0x04F8 0x0768 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3                           0x0234 0x04FC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD                            0x0234 0x04FC 0x0580 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7                            0x0234 0x04FC 0x06BC 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15                          0x0234 0x04FC 0x05C4 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT                           0x0234 0x04FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17                          0x0234 0x04FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC                         0x0234 0x04FC 0x076C 0x6 0x0
+#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE                         0x0238 0x0500 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS                          0x0238 0x0500 0x05A0 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0                         0x0238 0x0500 0x065C 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1                       0x0238 0x0500 0x0670 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20                         0x0238 0x0500 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE                         0x023C 0x0504 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC                           0x023C 0x0504 0x059C 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK                        0x023C 0x0504 0x0650 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2                       0x023C 0x0504 0x0674 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21                         0x023C 0x0504 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE                         0x0240 0x0508 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD                           0x0240 0x0508 0x0594 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI                        0x0240 0x0508 0x0658 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1                       0x0240 0x0508 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19                         0x0240 0x0508 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC                           0x0244 0x050C 0x05A4 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO                        0x0244 0x050C 0x0654 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2                       0x0244 0x050C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25                         0x0244 0x050C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS                          0x0248 0x0510 0x05A8 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1                         0x0248 0x0510 0x0660 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3                       0x0248 0x0510 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18                         0x0248 0x0510 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD                           0x024C 0x0514 0x0598 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2                         0x024C 0x0514 0x0664 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN                          0x024C 0x0514 0x0678 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24                         0x024C 0x0514 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT                      0x0250 0x0518 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET                          0x0250 0x0518 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET                          0x0250 0x0518 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23                         0x0250 0x0518 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID                        0x0254 0x051C 0x055C 0x2 0x2
+#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT                        0x0254 0x051C 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT                        0x0254 0x051C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17                         0x0254 0x051C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN                           0x0258 0x0520 0x0738 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD1_WP                             0x0258 0x0520 0x0774 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD3_WP                             0x0258 0x0520 0x0794 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22                         0x0258 0x0520 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT                          0x025C 0x0524 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B                           0x025C 0x0524 0x0770 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B                           0x025C 0x0524 0x0780 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16                         0x025C 0x0524 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B                            0x0260 0x0528 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT                           0x0260 0x0528 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY                     0x0260 0x0528 0x05AC 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26                         0x0260 0x0528 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK                      0x0260 0x0528 0x073C 0x6 0x0
+
+#endif /* __DTS_IMX6SLL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
new file mode 100644
index 0000000000000..3659fd5ecfa62
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
@@ -0,0 +1,839 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+#include <dt-bindings/clock/imx6sll-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sll-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi3 = &ecspi3;
+		spi4 = &ecspi4;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points =
+				/* kHz    uV */
+				<996000  1275000>,
+				<792000  1175000>,
+				<396000  1075000>,
+				<198000	  975000>;
+			fsl,soc-operating-points =
+				/* ARM kHz      SOC-PU uV */
+				<996000         1175000>,
+				<792000         1175000>,
+				<396000         1175000>,
+				<198000		1175000>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6SLL_CLK_ARM>,
+				 <&clks IMX6SLL_CLK_PLL2_PFD2>,
+				 <&clks IMX6SLL_CLK_STEP>,
+				 <&clks IMX6SLL_CLK_PLL1_SW>,
+				 <&clks IMX6SLL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	ckil: clock-ckil {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-ipp-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-ipp-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
+		L2: cache-controller@a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		aips1: bus@2000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba: spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@2004000 {
+					compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
+						 <&clks IMX6SLL_CLK_OSC>,
+						 <&clks IMX6SLL_CLK_SPDIF>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_IPG>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "dma";
+					status = "disabled";
+				};
+
+				ecspi1: spi@2008000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI1>,
+						 <&clks IMX6SLL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI2>,
+						 <&clks IMX6SLL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI3>,
+						 <&clks IMX6SLL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI4>,
+						 <&clks IMX6SLL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart4: serial@2018000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
+						 <&clks IMX6SLL_CLK_UART4_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
+						 <&clks IMX6SLL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart2: serial@2024000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
+						 <&clks IMX6SLL_CLK_UART2_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi1: ssi@2028000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
+						 <&clks IMX6SLL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi2: ssi@202c000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
+						 <&clks IMX6SLL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi3: ssi@2030000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
+						 <&clks IMX6SLL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				uart3: serial@2034000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02034000 0x4000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-name = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
+						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			};
+
+			pwm1: pwm@2080000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM1>,
+					 <&clks IMX6SLL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm2: pwm@2084000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM2>,
+					 <&clks IMX6SLL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm3: pwm@2088000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM3>,
+					 <&clks IMX6SLL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm4: pwm@208c000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM4>,
+					 <&clks IMX6SLL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			gpt1: timer@2098000 {
+				compatible = "fsl,imx6sl-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
+					 <&clks IMX6SLL_CLK_GPT_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 50 32>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
+					      <&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
+					      <&iomuxc 21 6 11>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
+					      <&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
+					      <&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
+					      <&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
+					      <&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
+					      <&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
+					      <&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
+					      <&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
+					      <&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO5>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
+					      <&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
+					      <&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
+					      <&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
+					      <&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
+					      <&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
+					      <&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
+					      <&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
+					      <&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
+					      <&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
+					      <&iomuxc 21 137 1>;
+			};
+
+			gpio6: gpio@20b0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO6>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: keypad@20b8000 {
+				compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@20bc000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG1>;
+			};
+
+			wdog2: watchdog@20c0000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: clock-controller@20c4000 {
+				compatible = "fsl,imx6sll-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+
+				assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>;
+				assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>;
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6sll-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-mfd";
+				reg = <0x020c8000 0x4000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reg_3p0: regulator-3p0@20c8120 {
+					compatible = "fsl,anatop-regulator";
+					reg = <0x20c8120>;
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				tempmon: temperature-sensor {
+					compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-parent = <&gpc>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+				};
+			};
+
+			usbphy1: usb-phy@20c9000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usb-phy@20ca000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x61>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			src: reset-controller@20d8000 {
+				compatible = "fsl,imx6sll-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: interrupt-controller@20dc000 {
+				compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+			};
+
+			iomuxc: pinctrl@20e0000 {
+				compatible = "fsl,imx6sll-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@20e4000 {
+				compatible = "fsl,imx6sll-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			csi: csi@20e8000 {
+				compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>,
+					 <&clks IMX6SLL_CLK_CSI>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "disp-axi", "csi_mclk", "disp_dcic";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@20ec000 {
+				compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_IPG>,
+					 <&clks IMX6SLL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				iram = <&ocram>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pxp: pxp@20f0000 {
+				compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp";
+				reg = <0x20f0000 0x4000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PXP>;
+				clock-names = "axi";
+			};
+
+			lcdif: lcd-controller@20f8000 {
+				compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
+					 <&clks IMX6SLL_CLK_LCDIF_APB>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			dcp: crypto@20fc000 {
+				compatible = "fsl,imx28-dcp";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DCP>;
+				clock-names = "dcp";
+			};
+		};
+
+		aips2: bus@2100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@2184000 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@2184200 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
+						"fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			usdhc1: mmc@2190000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@2194000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@2198000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			mmdc: memory-controller@21b0000 {
+				compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>;
+			};
+
+			rngb: rng@21b4000 {
+				compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb";
+				reg = <0x021b4000 0x4000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>;
+			};
+
+			ocotp: efuse@21bc000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6sll-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SLL_CLK_OCOTP>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+			};
+
+			audmux: audmux@21d8000 {
+				compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart",
+					     "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
+					 <&clks IMX6SLL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts
new file mode 100644
index 0000000000000..a2c79bcf9a11c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts
@@ -0,0 +1,603 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Boundary Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board";
+	compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&reg_3p3v>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can1_3v3: regulator-can1-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_3v3: regulator-can2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan: regulator-wlan {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wlan>;
+		compatible = "regulator-fixed";
+		clocks = <&clks IMX6SX_CLK_CKO>;
+		clock-names = "slow";
+		regulator-name = "wlan-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+		gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6sx-nitrogen6sx-sgtl5000";
+		cpu-dai = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0xc0000>;
+			read-only;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x2000>;
+			read-only;
+		};
+
+		partition@c2000 {
+			label = "Kernel";
+			reg = <0xc2000 0x11e000>;
+		};
+
+		partition@1e0000 {
+			label = "M4";
+			reg = <0x1e0000 0x20000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_3p3v>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@4 {
+			reg = <4>;
+		};
+
+		ethphy2: ethernet-phy@5 {
+			reg = <5>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+	phy-supply = <&reg_3p3v>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6SX_CLK_CKO2>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_1p8v>;
+		VDDD-supply = <&reg_1p8v>;
+		assigned-clocks = <&clks IMX6SX_CLK_CKO2_SEL>,
+				  <&clks IMX6SX_CLK_CKO2>;
+		assigned-clock-parents = <&clks IMX6SX_CLK_OSC>;
+		assigned-clock-rates = <0>, <24000000>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	dr_mode = "host";
+	disable-over-current;
+	reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	vmmc-supply = <&reg_wlan>;
+	cap-power-off-card;
+	cap-sdio-irq;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio7>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD	0x1b0b0
+			MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC	0x1b0b0
+			MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS	0x1b0b0
+			MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_COL1__ECSPI1_MISO		0x100b1
+			MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI		0x100b1
+			MX6SX_PAD_KEY_COL0__ECSPI1_SCLK		0x100b1
+			MX6SX_PAD_KEY_ROW1__GPIO2_IO_16		0x0b0b1
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0x1b0b0
+			MX6SX_PAD_ENET1_MDC__ENET1_MDC		0x1b0b0
+			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0x30b1
+			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0x30b1
+			MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0x30b1
+			MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0x30b1
+			MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0x30b1
+			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0x30b1
+			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
+			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
+			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
+			MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
+			MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
+			MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
+			MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0xb0b0
+			MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4	0xb0b0
+			MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5	0xb0b0
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0x30b1
+			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0x30b1
+			MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0x30b1
+			MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0x30b1
+			MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0x30b1
+			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0x30b1
+			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
+			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
+			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
+			MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
+			MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
+			MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
+			MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0xb0b0
+			MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8	0xb0b0
+			MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0xb0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b0b0
+			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b0b0
+			MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27	0x1b0b0
+			MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b0b0
+			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b0b0
+			MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24	0x0b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1	0x1b0b0
+			MX6SX_PAD_NAND_CLE__GPIO4_IO_3		0x1b0b0
+			MX6SX_PAD_NAND_RE_B__GPIO4_IO_12	0x1b0b0
+			MX6SX_PAD_NAND_WE_B__GPIO4_IO_14	0x1b0b0
+			MX6SX_PAD_NAND_WP_B__GPIO4_IO_15	0x1b0b0
+			MX6SX_PAD_NAND_READY_B__GPIO4_IO_13	0x1b0b0
+			MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x1b0b0
+			MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17	0x1b0b0
+			MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18	0x1b0b0
+			MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19	0x1b0b0
+			MX6SX_PAD_SD1_CMD__CCM_CLKO1		0x000b0
+			MX6SX_PAD_SD3_DATA5__GPIO7_IO_7		0x1b0b0
+			/* Test points */
+			MX6SX_PAD_NAND_DATA04__GPIO4_IO_8	0x1b0b0
+			MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+			MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO02__I2C2_SCL		0x4001b8b1
+			MX6SX_PAD_GPIO1_IO03__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
+			MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_DATA05__GPIO4_IO_9	0xb0b0
+			MX6SX_PAD_NAND_DATA06__GPIO4_IO_10	0xb0b0
+			MX6SX_PAD_NAND_DATA07__GPIO4_IO_11	0xb0b0
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO13__PWM4_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_reg_wlan: reg-wlangrp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_DATA4__GPIO7_IO_6		0x1b0b0
+			MX6SX_PAD_GPIO1_IO11__CCM_CLKO1		0x000b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO12__CCM_CLKO2		0x000b0
+			MX6SX_PAD_ENET1_COL__GPIO2_IO_0		0x1b0b0
+			MX6SX_PAD_ENET1_CRS__GPIO2_IO_1		0x1b0b0
+			MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22	0xb0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX		0x1b0b1
+			MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_COL3__UART5_DCE_TX		0x1b0b1
+			MX6SX_PAD_KEY_ROW3__UART5_DCE_RX		0x1b0b1
+			MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS		0x1b0b1
+			MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC	0x1b0b0
+			MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x170b1
+		>;
+	};
+
+	pinctrl_usbotg1_vbus: usbotg1-vbusgrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26	0xb0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+			MX6SX_PAD_KEY_COL2__GPIO2_IO_12		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10071
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17071
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17071
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17071
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17071
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17071
+		>;
+	};
+
+	pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10071
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17071
+			MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B	0x17071
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17071
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17071
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17071
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17071
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x17071
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x17071
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x17071
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x17071
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100b9
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170b9
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170b9
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170b9
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170b9
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170b9
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170b9
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170b9
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170b9
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100f9
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170f9
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170f9
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170f9
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170f9
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170f9
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170f9
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170f9
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170f9
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6sx-pinfunc.h
new file mode 100644
index 0000000000000..f4dc46207954c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-pinfunc.h
@@ -0,0 +1,1668 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6SX_PINFUNC_H
+#define __DTS_IMX6SX_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SX_PAD_GPIO1_IO00__I2C1_SCL                            0x0014 0x035C 0x07A8 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO00__USDHC1_VSELECT                      0x0014 0x035C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO00__SPDIF_LOCK                          0x0014 0x035C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO00__CCM_WAIT                            0x0014 0x035C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO00__WDOG1_WDOG_ANY                      0x0014 0x035C 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0                          0x0014 0x035C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5               0x0014 0x035C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO00__PHY_DTB_1                           0x0014 0x035C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO01__I2C1_SDA                            0x0018 0x0360 0x07AC 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO01__USDHC1_RESET_B                      0x0018 0x0360 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO01__SPDIF_SR_CLK                        0x0018 0x0360 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO01__CCM_STOP                            0x0018 0x0360 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO01__WDOG3_WDOG_B                        0x0018 0x0360 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO01__GPIO1_IO_1                          0x0018 0x0360 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO01__SNVS_HP_WRAPPER_VIO_5_CTL           0x0018 0x0360 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO01__PHY_DTB_0                           0x0018 0x0360 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO02__I2C2_SCL                            0x001C 0x0364 0x07B0 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO02__USDHC1_CD_B                         0x001C 0x0364 0x0864 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO02__CSI2_MCLK                           0x001C 0x0364 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO02__CCM_DI0_EXT_CLK                     0x001C 0x0364 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO02__WDOG1_WDOG_B                        0x001C 0x0364 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO02__GPIO1_IO_2                          0x001C 0x0364 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO02__CCM_REF_EN_B                        0x001C 0x0364 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO02__PHY_TDI                             0x001C 0x0364 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO03__I2C2_SDA                            0x0020 0x0368 0x07B4 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO03__USDHC1_WP                           0x0020 0x0368 0x0868 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO03__ENET1_REF_CLK_25M                   0x0020 0x0368 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO03__CCM_DI1_EXT_CLK                     0x0020 0x0368 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO03__WDOG2_WDOG_B                        0x0020 0x0368 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3                          0x0020 0x0368 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP                        0x0020 0x0368 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO03__PHY_TCK                             0x0020 0x0368 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX                        0x0024 0x036C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX                        0x0024 0x036C 0x0830 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B                      0x0024 0x036C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO04__ENET1_MDC                           0x0024 0x036C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT                      0x0024 0x036C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO04__ENET2_REF_CLK2                      0x0024 0x036C 0x076C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4                          0x0024 0x036C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP                        0x0024 0x036C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO04__PHY_TMS                             0x0024 0x036C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX                        0x0028 0x0370 0x0830 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX                        0x0028 0x0370 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT                      0x0028 0x0370 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO                          0x0028 0x0370 0x0764 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK                   0x0028 0x0370 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO05__ENET1_REF_CLK1                      0x0028 0x0370 0x0760 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5                          0x0028 0x0370 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK                      0x0028 0x0370 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO05__PHY_TDO                             0x0028 0x0370 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX                        0x002C 0x0374 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX                        0x002C 0x0374 0x0838 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B                         0x002C 0x0374 0x086C 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO06__ENET2_MDC                           0x002C 0x0374 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK                           0x002C 0x0374 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS                       0x002C 0x0374 0x082C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART1_DTE_CTS                       0x002C 0x0374 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6                          0x002C 0x0374 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET                    0x002C 0x0374 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED     0x002C 0x0374 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX                        0x0030 0x0378 0x0838 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX                        0x0030 0x0378 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO07__USDHC2_WP                           0x0030 0x0378 0x0870 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO                          0x0030 0x0378 0x0770 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK                         0x0030 0x0378 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS                       0x0030 0x0378 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART1_DTE_RTS                       0x0030 0x0378 0x082C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7                          0x0030 0x0378 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET                     0x0030 0x0378 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT                           0x0030 0x0378 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO07__VDEC_DEBUG_44                       0x0030 0x0378 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC                         0x0034 0x037C 0x0860 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B                        0x0034 0x037C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0                    0x0034 0x037C 0x081C 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY                        0x0034 0x037C 0x069C 0x3 0x1
+#define MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS                       0x0034 0x037C 0x0834 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO08__UART2_DTE_CTS                       0x0034 0x037C 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8                          0x0034 0x037C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET                    0x0034 0x037C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT                           0x0034 0x037C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO08__VDEC_DEBUG_43                       0x0034 0x037C 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO09__USB_OTG1_PWR                        0x0038 0x0380 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B                        0x0038 0x0380 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                    0x0038 0x0380 0x0820 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO09__CCM_OUT0                            0x0038 0x0380 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS                       0x0038 0x0380 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO09__UART2_DTE_RTS                       0x0038 0x0380 0x0834 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9                          0x0038 0x0380 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT                        0x0038 0x0380 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                   0x0038 0x0380 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO09__VDEC_DEBUG_42                       0x0038 0x0380 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID                      0x003C 0x0384 0x0624 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO10__SPDIF_EXT_CLK                       0x003C 0x0384 0x0828 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO10__PWM1_OUT                            0x003C 0x0384 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO10__CCM_OUT1                            0x003C 0x0384 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO10__CSI1_FIELD                          0x003C 0x0384 0x070C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO10__GPIO1_IO_10                         0x003C 0x0384 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO10__CSU_CSU_INT_DEB                     0x003C 0x0384 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO10__OBSERVE_MUX_OUT_3                   0x003C 0x0384 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO10__VDEC_DEBUG_41                       0x003C 0x0384 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO11__USB_OTG2_OC                         0x0040 0x0388 0x085C 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO11__SPDIF_IN                            0x0040 0x0388 0x0824 0x1 0x2
+#define MX6SX_PAD_GPIO1_IO11__PWM2_OUT                            0x0040 0x0388 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO11__CCM_CLKO1                           0x0040 0x0388 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO11__MLB_DATA                            0x0040 0x0388 0x07EC 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO11__GPIO1_IO_11                         0x0040 0x0388 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO11__CSU_CSU_ALARM_AUT_0                 0x0040 0x0388 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO11__OBSERVE_MUX_OUT_2                   0x0040 0x0388 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO11__VDEC_DEBUG_40                       0x0040 0x0388 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO12__USB_OTG2_PWR                        0x0044 0x038C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO12__SPDIF_OUT                           0x0044 0x038C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO12__PWM3_OUT                            0x0044 0x038C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO12__CCM_CLKO2                           0x0044 0x038C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO12__MLB_CLK                             0x0044 0x038C 0x07E8 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12                         0x0044 0x038C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT_1                 0x0044 0x038C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO12__OBSERVE_MUX_OUT_1                   0x0044 0x038C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO12__VDEC_DEBUG_39                       0x0044 0x038C 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY                      0x0048 0x0390 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO13__ANATOP_OTG2_ID                      0x0048 0x0390 0x0628 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO13__PWM4_OUT                            0x0048 0x0390 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO13__CCM_OUT2                            0x0048 0x0390 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO13__MLB_SIG                             0x0048 0x0390 0x07F0 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO13__GPIO1_IO_13                         0x0048 0x0390 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT_2                 0x0048 0x0390 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO13__OBSERVE_MUX_OUT_0                   0x0048 0x0390 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO13__VDEC_DEBUG_38                       0x0048 0x0390 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA00__CSI1_DATA_2                         0x004C 0x0394 0x06A8 0x0 0x0
+#define MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK                         0x004C 0x0394 0x078C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC                     0x004C 0x0394 0x0684 0x2 0x1
+#define MX6SX_PAD_CSI_DATA00__I2C1_SCL                            0x004C 0x0394 0x07A8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA00__UART6_RI_B                          0x004C 0x0394 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA00__GPIO1_IO_14                         0x004C 0x0394 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA00__WEIM_DATA_23                        0x004C 0x0394 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK                        0x004C 0x0394 0x0800 0x7 0x0
+#define MX6SX_PAD_CSI_DATA00__VADC_DATA_4                         0x004C 0x0394 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA00__MMDC_DEBUG_37                       0x004C 0x0394 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA01__CSI1_DATA_3                         0x0050 0x0398 0x06AC 0x0 0x0
+#define MX6SX_PAD_CSI_DATA01__ESAI_TX_FS                          0x0050 0x0398 0x077C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS                    0x0050 0x0398 0x0688 0x2 0x1
+#define MX6SX_PAD_CSI_DATA01__I2C1_SDA                            0x0050 0x0398 0x07AC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA01__UART6_DSR_B                         0x0050 0x0398 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA01__GPIO1_IO_15                         0x0050 0x0398 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA01__WEIM_DATA_22                        0x0050 0x0398 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC                        0x0050 0x0398 0x0804 0x7 0x0
+#define MX6SX_PAD_CSI_DATA01__VADC_DATA_5                         0x0050 0x0398 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA01__MMDC_DEBUG_38                       0x0050 0x0398 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA02__CSI1_DATA_4                         0x0054 0x039C 0x06B0 0x0 0x0
+#define MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK                         0x0054 0x039C 0x0788 0x1 0x1
+#define MX6SX_PAD_CSI_DATA02__AUDMUX_AUD6_RXC                     0x0054 0x039C 0x067C 0x2 0x1
+#define MX6SX_PAD_CSI_DATA02__KPP_COL_5                           0x0054 0x039C 0x07C8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA02__UART6_DTR_B                         0x0054 0x039C 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA02__GPIO1_IO_16                         0x0054 0x039C 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA02__WEIM_DATA_21                        0x0054 0x039C 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA02__SAI1_RX_BCLK                        0x0054 0x039C 0x07F4 0x7 0x0
+#define MX6SX_PAD_CSI_DATA02__VADC_DATA_6                         0x0054 0x039C 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA02__MMDC_DEBUG_39                       0x0054 0x039C 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA03__CSI1_DATA_5                         0x0058 0x03A0 0x06B4 0x0 0x0
+#define MX6SX_PAD_CSI_DATA03__ESAI_RX_FS                          0x0058 0x03A0 0x0778 0x1 0x1
+#define MX6SX_PAD_CSI_DATA03__AUDMUX_AUD6_RXFS                    0x0058 0x03A0 0x0680 0x2 0x1
+#define MX6SX_PAD_CSI_DATA03__KPP_ROW_5                           0x0058 0x03A0 0x07D4 0x3 0x0
+#define MX6SX_PAD_CSI_DATA03__UART6_DCD_B                         0x0058 0x03A0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA03__GPIO1_IO_17                         0x0058 0x03A0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA03__WEIM_DATA_20                        0x0058 0x03A0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA03__SAI1_RX_SYNC                        0x0058 0x03A0 0x07FC 0x7 0x0
+#define MX6SX_PAD_CSI_DATA03__VADC_DATA_7                         0x0058 0x03A0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA03__MMDC_DEBUG_40                       0x0058 0x03A0 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA04__CSI1_DATA_6                         0x005C 0x03A4 0x06B8 0x0 0x0
+#define MX6SX_PAD_CSI_DATA04__ESAI_TX1                            0x005C 0x03A4 0x0794 0x1 0x1
+#define MX6SX_PAD_CSI_DATA04__SPDIF_OUT                           0x005C 0x03A4 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_DATA04__KPP_COL_6                           0x005C 0x03A4 0x07CC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_DCE_RX                        0x005C 0x03A4 0x0858 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_DTE_TX                        0x005C 0x03A4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18                         0x005C 0x03A4 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19                        0x005C 0x03A4 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA04__PWM5_OUT                            0x005C 0x03A4 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA04__VADC_DATA_8                         0x005C 0x03A4 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA04__MMDC_DEBUG_41                       0x005C 0x03A4 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA05__CSI1_DATA_7                         0x0060 0x03A8 0x06BC 0x0 0x0
+#define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1                        0x0060 0x03A8 0x07A0 0x1 0x1
+#define MX6SX_PAD_CSI_DATA05__SPDIF_IN                            0x0060 0x03A8 0x0824 0x2 0x1
+#define MX6SX_PAD_CSI_DATA05__KPP_ROW_6                           0x0060 0x03A8 0x07D8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA05__UART6_DCE_TX                        0x0060 0x03A8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA05__UART6_DTE_RX                        0x0060 0x03A8 0x0858 0x4 0x1
+#define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19                         0x0060 0x03A8 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18                        0x0060 0x03A8 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA05__PWM6_OUT                            0x0060 0x03A8 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA05__VADC_DATA_9                         0x0060 0x03A8 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA05__MMDC_DEBUG_42                       0x0060 0x03A8 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA06__CSI1_DATA_8                         0x0064 0x03AC 0x06C0 0x0 0x0
+#define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3                        0x0064 0x03AC 0x0798 0x1 0x1
+#define MX6SX_PAD_CSI_DATA06__I2C4_SCL                            0x0064 0x03AC 0x07C0 0x2 0x2
+#define MX6SX_PAD_CSI_DATA06__KPP_COL_7                           0x0064 0x03AC 0x07D0 0x3 0x0
+#define MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS                       0x0064 0x03AC 0x0854 0x4 0x0
+#define MX6SX_PAD_CSI_DATA06__UART6_DTE_CTS                       0x0064 0x03AC 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20                         0x0064 0x03AC 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17                        0x0064 0x03AC 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA06__DCIC2_OUT                           0x0064 0x03AC 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA06__VADC_DATA_10                        0x0064 0x03AC 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA06__MMDC_DEBUG_43                       0x0064 0x03AC 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA07__CSI1_DATA_9                         0x0068 0x03B0 0x06C4 0x0 0x0
+#define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2                        0x0068 0x03B0 0x079C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA07__I2C4_SDA                            0x0068 0x03B0 0x07C4 0x2 0x2
+#define MX6SX_PAD_CSI_DATA07__KPP_ROW_7                           0x0068 0x03B0 0x07DC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS                       0x0068 0x03B0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA07__UART6_DTE_RTS                       0x0068 0x03B0 0x0854 0x4 0x1
+#define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21                         0x0068 0x03B0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16                        0x0068 0x03B0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA07__DCIC1_OUT                           0x0068 0x03B0 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA07__VADC_DATA_11                        0x0068 0x03B0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA07__MMDC_DEBUG_44                       0x0068 0x03B0 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC                           0x006C 0x03B4 0x0700 0x0 0x0
+#define MX6SX_PAD_CSI_HSYNC__ESAI_TX0                             0x006C 0x03B4 0x0790 0x1 0x1
+#define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD                      0x006C 0x03B4 0x0678 0x2 0x1
+#define MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS                        0x006C 0x03B4 0x0844 0x3 0x2
+#define MX6SX_PAD_CSI_HSYNC__UART4_DTE_CTS                        0x006C 0x03B4 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_HSYNC__MQS_LEFT                             0x006C 0x03B4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22                          0x006C 0x03B4 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25                         0x006C 0x03B4 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0                       0x006C 0x03B4 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_HSYNC__VADC_DATA_2                          0x006C 0x03B4 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_HSYNC__MMDC_DEBUG_35                        0x006C 0x03B4 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_MCLK__CSI1_MCLK                             0x0070 0x03B8 0x0000 0x0 0x0
+#define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK                        0x0070 0x03B8 0x0784 0x1 0x1
+#define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT                        0x0070 0x03B8 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_MCLK__UART4_DCE_RX                          0x0070 0x03B8 0x0848 0x3 0x2
+#define MX6SX_PAD_CSI_MCLK__UART4_DTE_TX                          0x0070 0x03B8 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT                        0x0070 0x03B8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23                           0x0070 0x03B8 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26                          0x0070 0x03B8 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_MCLK__CSI1_FIELD                            0x0070 0x03B8 0x070C 0x7 0x0
+#define MX6SX_PAD_CSI_MCLK__VADC_DATA_1                           0x0070 0x03B8 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_MCLK__MMDC_DEBUG_34                         0x0070 0x03B8 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK                         0x0074 0x03BC 0x0704 0x0 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK                      0x0074 0x03BC 0x0780 0x1 0x1
+#define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK                         0x0074 0x03BC 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX                        0x0074 0x03BC 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX                        0x0074 0x03BC 0x0848 0x3 0x3
+#define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT                      0x0074 0x03BC 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24                         0x0074 0x03BC 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27                        0x0074 0x03BC 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ESAI_TX_HF_CLK                      0x0074 0x03BC 0x0784 0x7 0x2
+#define MX6SX_PAD_CSI_PIXCLK__VADC_CLK                            0x0074 0x03BC 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_PIXCLK__MMDC_DEBUG_33                       0x0074 0x03BC 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC                           0x0078 0x03C0 0x0708 0x0 0x0
+#define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0                         0x0078 0x03C0 0x07A4 0x1 0x1
+#define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                      0x0078 0x03C0 0x0674 0x2 0x1
+#define MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS                        0x0078 0x03C0 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_VSYNC__UART4_DTE_RTS                        0x0078 0x03C0 0x0844 0x3 0x3
+#define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT                            0x0078 0x03C0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25                          0x0078 0x03C0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24                         0x0078 0x03C0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0                       0x0078 0x03C0 0x07F8 0x7 0x0
+#define MX6SX_PAD_CSI_VSYNC__VADC_DATA_3                          0x0078 0x03C0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_VSYNC__MMDC_DEBUG_36                        0x0078 0x03C0 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_COL__ENET1_COL                            0x007C 0x03C4 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_COL__ENET2_MDC                            0x007C 0x03C4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_COL__AUDMUX_AUD4_TXC                      0x007C 0x03C4 0x0654 0x2 0x1
+#define MX6SX_PAD_ENET1_COL__UART1_RI_B                           0x007C 0x03C4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_COL__SPDIF_EXT_CLK                        0x007C 0x03C4 0x0828 0x4 0x1
+#define MX6SX_PAD_ENET1_COL__GPIO2_IO_0                           0x007C 0x03C4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_COL__CSI2_DATA_23                         0x007C 0x03C4 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_COL__LCDIF2_DATA_16                       0x007C 0x03C4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_COL__VDEC_DEBUG_37                        0x007C 0x03C4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_COL__PCIE_CTRL_DEBUG_31                   0x007C 0x03C4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_CRS__ENET1_CRS                            0x0080 0x03C8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_CRS__ENET2_MDIO                           0x0080 0x03C8 0x0770 0x1 0x1
+#define MX6SX_PAD_ENET1_CRS__AUDMUX_AUD4_TXD                      0x0080 0x03C8 0x0648 0x2 0x1
+#define MX6SX_PAD_ENET1_CRS__UART1_DCD_B                          0x0080 0x03C8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_CRS__SPDIF_LOCK                           0x0080 0x03C8 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_CRS__GPIO2_IO_1                           0x0080 0x03C8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_CRS__CSI2_DATA_22                         0x0080 0x03C8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_CRS__LCDIF2_DATA_17                       0x0080 0x03C8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_CRS__VDEC_DEBUG_36                        0x0080 0x03C8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_CRS__PCIE_CTRL_DEBUG_30                   0x0080 0x03C8 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_MDC__ENET1_MDC                            0x0084 0x03CC 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_MDC__ENET2_MDC                            0x0084 0x03CC 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_MDC__AUDMUX_AUD3_RXFS                     0x0084 0x03CC 0x0638 0x2 0x1
+#define MX6SX_PAD_ENET1_MDC__ANATOP_24M_OUT                       0x0084 0x03CC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_MDC__EPIT2_OUT                            0x0084 0x03CC 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_MDC__GPIO2_IO_2                           0x0084 0x03CC 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_MDC__USB_OTG1_PWR                         0x0084 0x03CC 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_MDC__PWM7_OUT                             0x0084 0x03CC 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_MDIO__ENET1_MDIO                          0x0088 0x03D0 0x0764 0x0 0x1
+#define MX6SX_PAD_ENET1_MDIO__ENET2_MDIO                          0x0088 0x03D0 0x0770 0x1 0x2
+#define MX6SX_PAD_ENET1_MDIO__AUDMUX_MCLK                         0x0088 0x03D0 0x0000 0x2 0x0
+#define MX6SX_PAD_ENET1_MDIO__OSC32K_32K_OUT                      0x0088 0x03D0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_MDIO__EPIT1_OUT                           0x0088 0x03D0 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_MDIO__GPIO2_IO_3                          0x0088 0x03D0 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_MDIO__USB_OTG1_OC                         0x0088 0x03D0 0x0860 0x6 0x1
+#define MX6SX_PAD_ENET1_MDIO__PWM8_OUT                            0x0088 0x03D0 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__ENET1_RX_CLK                      0x008C 0x03D4 0x0768 0x0 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__ENET1_REF_CLK_25M                 0x008C 0x03D4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__AUDMUX_AUD4_TXFS                  0x008C 0x03D4 0x0658 0x2 0x1
+#define MX6SX_PAD_ENET1_RX_CLK__UART1_DSR_B                       0x008C 0x03D4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__SPDIF_OUT                         0x008C 0x03D4 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4                        0x008C 0x03D4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__CSI2_DATA_21                      0x008C 0x03D4 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__LCDIF2_DATA_18                    0x008C 0x03D4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35                     0x008C 0x03D4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29                0x008C 0x03D4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK                      0x0090 0x03D8 0x0000 0x0 0x0
+/*
+ * SION bit is necessary for ENET1_REF_CLK1 (ENET2_REF_CLK2 untested) if it is
+ * used as clock output of IMX6SX_CLK_ENET_REF (ENET1_TX_CLK) to e.g. supply a
+ * PHY in RMII mode. This configuration is valid if:
+ *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK is set
+ *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK unset
+ * It seems to be a silicon bug that in this configuration ENET1_TX reference
+ * clock isn't provided automatically.  According to i.MX6SX reference manual
+ * (IOMUXC_GPR_GPR1 field descriptions: ENET1_CLK_SEL, Rev. 0 from 2/2015) it
+ * should be the case.
+ * So this might have unwanted side effects for other hardware units that are
+ * also connected to that pin and using respective function as input (e.g.
+ * UART1's DTR handling on MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B).
+ */
+#define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                    0x0090 0x03D8 0x0760 0x1 0x1
+#define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD                   0x0090 0x03D8 0x0644 0x2 0x1
+#define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B                       0x0090 0x03D8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__SPDIF_SR_CLK                      0x0090 0x03D8 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5                        0x0090 0x03D8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__CSI2_DATA_20                      0x0090 0x03D8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__LCDIF2_DATA_19                    0x0090 0x03D8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__VDEC_DEBUG_34                     0x0090 0x03D8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__PCIE_CTRL_DEBUG_28                0x0090 0x03D8 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_COL__ENET2_COL                            0x0094 0x03DC 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_COL__ENET1_MDC                            0x0094 0x03DC 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC                      0x0094 0x03DC 0x064C 0x2 0x1
+#define MX6SX_PAD_ENET2_COL__UART1_DCE_RX                         0x0094 0x03DC 0x0830 0x3 0x2
+#define MX6SX_PAD_ENET2_COL__UART1_DTE_TX                         0x0094 0x03DC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_COL__SPDIF_IN                             0x0094 0x03DC 0x0824 0x4 0x3
+#define MX6SX_PAD_ENET2_COL__GPIO2_IO_6                           0x0094 0x03DC 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID                       0x0094 0x03DC 0x0624 0x6 0x1
+#define MX6SX_PAD_ENET2_COL__LCDIF2_DATA_20                       0x0094 0x03DC 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_COL__VDEC_DEBUG_33                        0x0094 0x03DC 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_COL__PCIE_CTRL_DEBUG_27                   0x0094 0x03DC 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_CRS__ENET2_CRS                            0x0098 0x03E0 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_CRS__ENET1_MDIO                           0x0098 0x03E0 0x0764 0x1 0x2
+#define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS                     0x0098 0x03E0 0x0650 0x2 0x1
+#define MX6SX_PAD_ENET2_CRS__UART1_DCE_TX                         0x0098 0x03E0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_CRS__UART1_DTE_RX                         0x0098 0x03E0 0x0830 0x3 0x3
+#define MX6SX_PAD_ENET2_CRS__MLB_SIG                              0x0098 0x03E0 0x07F0 0x4 0x1
+#define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7                           0x0098 0x03E0 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID                       0x0098 0x03E0 0x0628 0x6 0x1
+#define MX6SX_PAD_ENET2_CRS__LCDIF2_DATA_21                       0x0098 0x03E0 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_CRS__VDEC_DEBUG_32                        0x0098 0x03E0 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_CRS__PCIE_CTRL_DEBUG_26                   0x0098 0x03E0 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK                      0x009C 0x03E4 0x0774 0x0 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M                 0x009C 0x03E4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL                          0x009C 0x03E4 0x07B8 0x2 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS                     0x009C 0x03E4 0x082C 0x3 0x2
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_DTE_CTS                     0x009C 0x03E4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA                          0x009C 0x03E4 0x07EC 0x4 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8                        0x009C 0x03E4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC                       0x009C 0x03E4 0x085C 0x6 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__LCDIF2_DATA_22                    0x009C 0x03E4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__VDEC_DEBUG_31                     0x009C 0x03E4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__PCIE_CTRL_DEBUG_25                0x009C 0x03E4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK                      0x00A0 0x03E8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                    0x00A0 0x03E8 0x076C 0x1 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA                          0x00A0 0x03E8 0x07BC 0x2 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS                     0x00A0 0x03E8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_DTE_RTS                     0x00A0 0x03E8 0x082C 0x3 0x3
+#define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK                           0x00A0 0x03E8 0x07E8 0x4 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9                        0x00A0 0x03E8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR                      0x00A0 0x03E8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__LCDIF2_DATA_23                    0x00A0 0x03E8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__VDEC_DEBUG_30                     0x00A0 0x03E8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24                0x00A0 0x03E8 0x0000 0x9 0x0
+#define MX6SX_PAD_KEY_COL0__KPP_COL_0                             0x00A4 0x03EC 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL0__USDHC3_CD_B                           0x00A4 0x03EC 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL0__UART6_DCE_RTS                         0x00A4 0x03EC 0x0854 0x2 0x2
+#define MX6SX_PAD_KEY_COL0__UART6_DTE_CTS                         0x00A4 0x03EC 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK                           0x00A4 0x03EC 0x0710 0x3 0x0
+#define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC                       0x00A4 0x03EC 0x066C 0x4 0x0
+#define MX6SX_PAD_KEY_COL0__GPIO2_IO_10                           0x00A4 0x03EC 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL0__SDMA_EXT_EVENT_1                      0x00A4 0x03EC 0x0820 0x6 0x1
+#define MX6SX_PAD_KEY_COL0__SAI2_TX_BCLK                          0x00A4 0x03EC 0x0814 0x7 0x0
+#define MX6SX_PAD_KEY_COL0__VADC_DATA_0                           0x00A4 0x03EC 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_COL1__KPP_COL_1                             0x00A8 0x03F0 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B                        0x00A8 0x03F0 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL1__UART6_DCE_TX                          0x00A8 0x03F0 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL1__UART6_DTE_RX                          0x00A8 0x03F0 0x0858 0x2 0x2
+#define MX6SX_PAD_KEY_COL1__ECSPI1_MISO                           0x00A8 0x03F0 0x0714 0x3 0x0
+#define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS                      0x00A8 0x03F0 0x0670 0x4 0x0
+#define MX6SX_PAD_KEY_COL1__GPIO2_IO_11                           0x00A8 0x03F0 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL1__USDHC3_RESET                          0x00A8 0x03F0 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC                          0x00A8 0x03F0 0x0818 0x7 0x0
+#define MX6SX_PAD_KEY_COL2__KPP_COL_2                             0x00AC 0x03F4 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL2__USDHC4_CD_B                           0x00AC 0x03F4 0x0874 0x1 0x1
+#define MX6SX_PAD_KEY_COL2__UART5_DCE_RTS                         0x00AC 0x03F4 0x084C 0x2 0x2
+#define MX6SX_PAD_KEY_COL2__UART5_DTE_CTS                         0x00AC 0x03F4 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL2__CAN1_TX                               0x00AC 0x03F4 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL2__CANFD_TX1                             0x00AC 0x03F4 0x0000 0x4 0x0
+#define MX6SX_PAD_KEY_COL2__GPIO2_IO_12                           0x00AC 0x03F4 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL2__WEIM_DATA_30                          0x00AC 0x03F4 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL2__ECSPI1_RDY                            0x00AC 0x03F4 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_COL3__KPP_COL_3                             0x00B0 0x03F8 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL3__USDHC4_LCTL                           0x00B0 0x03F8 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL3__UART5_DCE_TX                          0x00B0 0x03F8 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL3__UART5_DTE_RX                          0x00B0 0x03F8 0x0850 0x2 0x2
+#define MX6SX_PAD_KEY_COL3__CAN2_TX                               0x00B0 0x03F8 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL3__CANFD_TX2                             0x00B0 0x03F8 0x0000 0x4 0x0
+#define MX6SX_PAD_KEY_COL3__GPIO2_IO_13                           0x00B0 0x03F8 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL3__WEIM_DATA_28                          0x00B0 0x03F8 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL3__ECSPI1_SS2                            0x00B0 0x03F8 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_COL4__KPP_COL_4                             0x00B4 0x03FC 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL4__ENET2_MDC                             0x00B4 0x03FC 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL4__I2C3_SCL                              0x00B4 0x03FC 0x07B8 0x2 0x2
+#define MX6SX_PAD_KEY_COL4__USDHC2_LCTL                           0x00B4 0x03FC 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL4__AUDMUX_AUD5_RXC                       0x00B4 0x03FC 0x0664 0x4 0x0
+#define MX6SX_PAD_KEY_COL4__GPIO2_IO_14                           0x00B4 0x03FC 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL4__WEIM_CRE                              0x00B4 0x03FC 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK                          0x00B4 0x03FC 0x0808 0x7 0x0
+#define MX6SX_PAD_KEY_ROW0__KPP_ROW_0                             0x00B8 0x0400 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW0__USDHC3_WP                             0x00B8 0x0400 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS                         0x00B8 0x0400 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW0__UART6_DTE_RTS                         0x00B8 0x0400 0x0854 0x2 0x3
+#define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI                           0x00B8 0x0400 0x0718 0x3 0x0
+#define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                       0x00B8 0x0400 0x0660 0x4 0x0
+#define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15                           0x00B8 0x0400 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW0__SDMA_EXT_EVENT_0                      0x00B8 0x0400 0x081C 0x6 0x1
+#define MX6SX_PAD_KEY_ROW0__SAI2_TX_DATA_0                        0x00B8 0x0400 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW0__GPU_IDLE                              0x00B8 0x0400 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_ROW1__KPP_ROW_1                             0x00BC 0x0404 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT                        0x00BC 0x0404 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW1__UART6_DCE_RX                          0x00BC 0x0404 0x0858 0x2 0x3
+#define MX6SX_PAD_KEY_ROW1__UART6_DTE_TX                          0x00BC 0x0404 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0                            0x00BC 0x0404 0x071C 0x3 0x0
+#define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD                       0x00BC 0x0404 0x065C 0x4 0x0
+#define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16                           0x00BC 0x0404 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW1__WEIM_DATA_31                          0x00BC 0x0404 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW1__SAI2_RX_DATA_0                        0x00BC 0x0404 0x080C 0x7 0x0
+#define MX6SX_PAD_KEY_ROW1__M4_NMI                                0x00BC 0x0404 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_ROW2__KPP_ROW_2                             0x00C0 0x0408 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW2__USDHC4_WP                             0x00C0 0x0408 0x0878 0x1 0x1
+#define MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS                         0x00C0 0x0408 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW2__UART5_DTE_RTS                         0x00C0 0x0408 0x084C 0x2 0x3
+#define MX6SX_PAD_KEY_ROW2__CAN1_RX                               0x00C0 0x0408 0x068C 0x3 0x1
+#define MX6SX_PAD_KEY_ROW2__CANFD_RX1                             0x00C0 0x0408 0x0694 0x4 0x1
+#define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17                           0x00C0 0x0408 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW2__WEIM_DATA_29                          0x00C0 0x0408 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3                            0x00C0 0x0408 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW3__KPP_ROW_3                             0x00C4 0x040C 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL                           0x00C4 0x040C 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW3__UART5_DCE_RX                          0x00C4 0x040C 0x0850 0x2 0x3
+#define MX6SX_PAD_KEY_ROW3__UART5_DTE_TX                          0x00C4 0x040C 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW3__CAN2_RX                               0x00C4 0x040C 0x0690 0x3 0x1
+#define MX6SX_PAD_KEY_ROW3__CANFD_RX2                             0x00C4 0x040C 0x0698 0x4 0x1
+#define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18                           0x00C4 0x040C 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW3__WEIM_DTACK_B                          0x00C4 0x040C 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW3__ECSPI1_SS1                            0x00C4 0x040C 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW4__KPP_ROW_4                             0x00C8 0x0410 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW4__ENET2_MDIO                            0x00C8 0x0410 0x0770 0x1 0x3
+#define MX6SX_PAD_KEY_ROW4__I2C3_SDA                              0x00C8 0x0410 0x07BC 0x2 0x2
+#define MX6SX_PAD_KEY_ROW4__USDHC1_LCTL                           0x00C8 0x0410 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS                      0x00C8 0x0410 0x0668 0x4 0x0
+#define MX6SX_PAD_KEY_ROW4__GPIO2_IO_19                           0x00C8 0x0410 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW4__WEIM_ACLK_FREERUN                     0x00C8 0x0410 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW4__SAI2_RX_SYNC                          0x00C8 0x0410 0x0810 0x7 0x0
+#define MX6SX_PAD_LCD1_CLK__LCDIF1_CLK                            0x00CC 0x0414 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_CLK__LCDIF1_WR_RWN                         0x00CC 0x0414 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_CLK__AUDMUX_AUD3_RXC                       0x00CC 0x0414 0x0634 0x2 0x1
+#define MX6SX_PAD_LCD1_CLK__ENET1_1588_EVENT2_IN                  0x00CC 0x0414 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_CLK__CSI1_DATA_16                          0x00CC 0x0414 0x06DC 0x4 0x0
+#define MX6SX_PAD_LCD1_CLK__GPIO3_IO_0                            0x00CC 0x0414 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_CLK__USDHC1_WP                             0x00CC 0x0414 0x0868 0x6 0x0
+#define MX6SX_PAD_LCD1_CLK__SIM_M_HADDR_16                        0x00CC 0x0414 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_CLK__VADC_TEST_0                           0x00CC 0x0414 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_CLK__MMDC_DEBUG_0                          0x00CC 0x0414 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0                      0x00D0 0x0418 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA00__WEIM_CS1_B                         0x00D0 0x0418 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA00__M4_TRACE_0                         0x00D0 0x0418 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA00__KITTEN_TRACE_0                     0x00D0 0x0418 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA00__CSI1_DATA_20                       0x00D0 0x0418 0x06EC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA00__GPIO3_IO_1                         0x00D0 0x0418 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA00__SRC_BT_CFG_0                       0x00D0 0x0418 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA00__SIM_M_HADDR_21                     0x00D0 0x0418 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA00__VADC_TEST_5                        0x00D0 0x0418 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA00__MMDC_DEBUG_5                       0x00D0 0x0418 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1                      0x00D4 0x041C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA01__WEIM_CS2_B                         0x00D4 0x041C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA01__M4_TRACE_1                         0x00D4 0x041C 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA01__KITTEN_TRACE_1                     0x00D4 0x041C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA01__CSI1_DATA_21                       0x00D4 0x041C 0x06F0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA01__GPIO3_IO_2                         0x00D4 0x041C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA01__SRC_BT_CFG_1                       0x00D4 0x041C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA01__SIM_M_HADDR_22                     0x00D4 0x041C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA01__VADC_TEST_6                        0x00D4 0x041C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA01__MMDC_DEBUG_6                       0x00D4 0x041C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2                      0x00D8 0x0420 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA02__WEIM_CS3_B                         0x00D8 0x0420 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA02__M4_TRACE_2                         0x00D8 0x0420 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA02__KITTEN_TRACE_2                     0x00D8 0x0420 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA02__CSI1_DATA_22                       0x00D8 0x0420 0x06F4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA02__GPIO3_IO_3                         0x00D8 0x0420 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA02__SRC_BT_CFG_2                       0x00D8 0x0420 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA02__SIM_M_HADDR_23                     0x00D8 0x0420 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA02__VADC_TEST_7                        0x00D8 0x0420 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA02__MMDC_DEBUG_7                       0x00D8 0x0420 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3                      0x00DC 0x0424 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA03__WEIM_ADDR_24                       0x00DC 0x0424 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA03__M4_TRACE_3                         0x00DC 0x0424 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA03__KITTEN_TRACE_3                     0x00DC 0x0424 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA03__CSI1_DATA_23                       0x00DC 0x0424 0x06F8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA03__GPIO3_IO_4                         0x00DC 0x0424 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA03__SRC_BT_CFG_3                       0x00DC 0x0424 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA03__SIM_M_HADDR_24                     0x00DC 0x0424 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA03__VADC_TEST_8                        0x00DC 0x0424 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA03__MMDC_DEBUG_8                       0x00DC 0x0424 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4                      0x00E0 0x0428 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA04__WEIM_ADDR_25                       0x00E0 0x0428 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA04__KITTEN_TRACE_4                     0x00E0 0x0428 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC                         0x00E0 0x0428 0x0708 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA04__GPIO3_IO_5                         0x00E0 0x0428 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA04__SRC_BT_CFG_4                       0x00E0 0x0428 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA04__SIM_M_HADDR_25                     0x00E0 0x0428 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA04__VADC_TEST_9                        0x00E0 0x0428 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA04__MMDC_DEBUG_9                       0x00E0 0x0428 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5                      0x00E4 0x042C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA05__WEIM_ADDR_26                       0x00E4 0x042C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA05__KITTEN_TRACE_5                     0x00E4 0x042C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC                         0x00E4 0x042C 0x0700 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA05__GPIO3_IO_6                         0x00E4 0x042C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA05__SRC_BT_CFG_5                       0x00E4 0x042C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA05__SIM_M_HADDR_26                     0x00E4 0x042C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA05__VADC_TEST_10                       0x00E4 0x042C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA05__MMDC_DEBUG_10                      0x00E4 0x042C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6                      0x00E8 0x0430 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA06__WEIM_EB_B_2                        0x00E8 0x0430 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA06__KITTEN_TRACE_6                     0x00E8 0x0430 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK                        0x00E8 0x0430 0x0704 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA06__GPIO3_IO_7                         0x00E8 0x0430 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA06__SRC_BT_CFG_6                       0x00E8 0x0430 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA06__SIM_M_HADDR_27                     0x00E8 0x0430 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA06__VADC_TEST_11                       0x00E8 0x0430 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA06__MMDC_DEBUG_11                      0x00E8 0x0430 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7                      0x00EC 0x0434 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA07__WEIM_EB_B_3                        0x00EC 0x0434 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA07__KITTEN_TRACE_7                     0x00EC 0x0434 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA07__CSI1_MCLK                          0x00EC 0x0434 0x0000 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA07__GPIO3_IO_8                         0x00EC 0x0434 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA07__SRC_BT_CFG_7                       0x00EC 0x0434 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA07__SIM_M_HADDR_28                     0x00EC 0x0434 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA07__VADC_TEST_12                       0x00EC 0x0434 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA07__MMDC_DEBUG_12                      0x00EC 0x0434 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8                      0x00F0 0x0438 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA08__WEIM_AD_8                          0x00F0 0x0438 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA08__KITTEN_TRACE_8                     0x00F0 0x0438 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9                        0x00F0 0x0438 0x06C4 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA08__GPIO3_IO_9                         0x00F0 0x0438 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA08__SRC_BT_CFG_8                       0x00F0 0x0438 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA08__SIM_M_HADDR_29                     0x00F0 0x0438 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA08__VADC_TEST_13                       0x00F0 0x0438 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA08__MMDC_DEBUG_13                      0x00F0 0x0438 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9                      0x00F4 0x043C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA09__WEIM_AD_9                          0x00F4 0x043C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA09__KITTEN_TRACE_9                     0x00F4 0x043C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8                        0x00F4 0x043C 0x06C0 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA09__GPIO3_IO_10                        0x00F4 0x043C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA09__SRC_BT_CFG_9                       0x00F4 0x043C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA09__SIM_M_HADDR_30                     0x00F4 0x043C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA09__VADC_TEST_14                       0x00F4 0x043C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA09__MMDC_DEBUG_14                      0x00F4 0x043C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10                     0x00F8 0x0440 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA10__WEIM_AD_10                         0x00F8 0x0440 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA10__KITTEN_TRACE_10                    0x00F8 0x0440 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7                        0x00F8 0x0440 0x06BC 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA10__GPIO3_IO_11                        0x00F8 0x0440 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA10__SRC_BT_CFG_10                      0x00F8 0x0440 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA10__SIM_M_HADDR_31                     0x00F8 0x0440 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA10__VADC_TEST_15                       0x00F8 0x0440 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA10__MMDC_DEBUG_15                      0x00F8 0x0440 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11                     0x00FC 0x0444 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA11__WEIM_AD_11                         0x00FC 0x0444 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA11__KITTEN_TRACE_11                    0x00FC 0x0444 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6                        0x00FC 0x0444 0x06B8 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA11__GPIO3_IO_12                        0x00FC 0x0444 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA11__SRC_BT_CFG_11                      0x00FC 0x0444 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA11__SIM_M_HBURST_0                     0x00FC 0x0444 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA11__VADC_TEST_16                       0x00FC 0x0444 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA11__MMDC_DEBUG_16                      0x00FC 0x0444 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12                     0x0100 0x0448 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA12__WEIM_AD_12                         0x0100 0x0448 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA12__KITTEN_TRACE_12                    0x0100 0x0448 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5                        0x0100 0x0448 0x06B4 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA12__GPIO3_IO_13                        0x0100 0x0448 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA12__SRC_BT_CFG_12                      0x0100 0x0448 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA12__SIM_M_HBURST_1                     0x0100 0x0448 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA12__VADC_TEST_17                       0x0100 0x0448 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA12__MMDC_DEBUG_17                      0x0100 0x0448 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13                     0x0104 0x044C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA13__WEIM_AD_13                         0x0104 0x044C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA13__KITTEN_TRACE_13                    0x0104 0x044C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4                        0x0104 0x044C 0x06B0 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA13__GPIO3_IO_14                        0x0104 0x044C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA13__SRC_BT_CFG_13                      0x0104 0x044C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA13__SIM_M_HBURST_2                     0x0104 0x044C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA13__VADC_TEST_18                       0x0104 0x044C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA13__MMDC_DEBUG_18                      0x0104 0x044C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14                     0x0108 0x0450 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA14__WEIM_AD_14                         0x0108 0x0450 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA14__KITTEN_TRACE_14                    0x0108 0x0450 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3                        0x0108 0x0450 0x06AC 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA14__GPIO3_IO_15                        0x0108 0x0450 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA14__SRC_BT_CFG_14                      0x0108 0x0450 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA14__SIM_M_HMASTLOCK                    0x0108 0x0450 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA14__VADC_TEST_19                       0x0108 0x0450 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA14__MMDC_DEBUG_19                      0x0108 0x0450 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15                     0x010C 0x0454 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA15__WEIM_AD_15                         0x010C 0x0454 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA15__KITTEN_TRACE_15                    0x010C 0x0454 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2                        0x010C 0x0454 0x06A8 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA15__GPIO3_IO_16                        0x010C 0x0454 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA15__SRC_BT_CFG_15                      0x010C 0x0454 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA15__SIM_M_HPROT_0                      0x010C 0x0454 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA15__VDEC_DEBUG_0                       0x010C 0x0454 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA15__MMDC_DEBUG_20                      0x010C 0x0454 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16                     0x0110 0x0458 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA16__WEIM_ADDR_16                       0x0110 0x0458 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA16__M4_TRACE_CLK                       0x0110 0x0458 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA16__KITTEN_TRACE_CLK                   0x0110 0x0458 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1                        0x0110 0x0458 0x06A4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA16__GPIO3_IO_17                        0x0110 0x0458 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA16__SRC_BT_CFG_24                      0x0110 0x0458 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA16__SIM_M_HPROT_1                      0x0110 0x0458 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA16__VDEC_DEBUG_1                       0x0110 0x0458 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA16__MMDC_DEBUG_21                      0x0110 0x0458 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17                     0x0114 0x045C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA17__WEIM_ADDR_17                       0x0114 0x045C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA17__KITTEN_TRACE_CTL                   0x0114 0x045C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0                        0x0114 0x045C 0x06A0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA17__GPIO3_IO_18                        0x0114 0x045C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA17__SRC_BT_CFG_25                      0x0114 0x045C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA17__SIM_M_HPROT_2                      0x0114 0x045C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA17__VDEC_DEBUG_2                       0x0114 0x045C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA17__MMDC_DEBUG_22                      0x0114 0x045C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18                     0x0118 0x0460 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA18__WEIM_ADDR_18                       0x0118 0x0460 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA18__M4_EVENTO                          0x0118 0x0460 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA18__KITTEN_EVENTO                      0x0118 0x0460 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA18__CSI1_DATA_15                       0x0118 0x0460 0x06D8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA18__GPIO3_IO_19                        0x0118 0x0460 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA18__SRC_BT_CFG_26                      0x0118 0x0460 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA18__SIM_M_HPROT_3                      0x0118 0x0460 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA18__VDEC_DEBUG_3                       0x0118 0x0460 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA18__MMDC_DEBUG_23                      0x0118 0x0460 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19                     0x011C 0x0464 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA19__WEIM_ADDR_19                       0x011C 0x0464 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA19__M4_TRACE_SWO                       0x011C 0x0464 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA19__CSI1_DATA_14                       0x011C 0x0464 0x06D4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA19__GPIO3_IO_20                        0x011C 0x0464 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA19__SRC_BT_CFG_27                      0x011C 0x0464 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA19__SIM_M_HREADYOUT                    0x011C 0x0464 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA19__VDEC_DEBUG_4                       0x011C 0x0464 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA19__MMDC_DEBUG_24                      0x011C 0x0464 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20                     0x0120 0x0468 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA20__WEIM_ADDR_20                       0x0120 0x0468 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA20__PWM8_OUT                           0x0120 0x0468 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA20__ENET1_1588_EVENT2_OUT              0x0120 0x0468 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA20__CSI1_DATA_13                       0x0120 0x0468 0x06D0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA20__GPIO3_IO_21                        0x0120 0x0468 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA20__SRC_BT_CFG_28                      0x0120 0x0468 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA20__SIM_M_HRESP                        0x0120 0x0468 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA20__VDEC_DEBUG_5                       0x0120 0x0468 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA20__MMDC_DEBUG_25                      0x0120 0x0468 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21                     0x0124 0x046C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA21__WEIM_ADDR_21                       0x0124 0x046C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA21__PWM7_OUT                           0x0124 0x046C 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA21__ENET1_1588_EVENT3_OUT              0x0124 0x046C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA21__CSI1_DATA_12                       0x0124 0x046C 0x06CC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA21__GPIO3_IO_22                        0x0124 0x046C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA21__SRC_BT_CFG_29                      0x0124 0x046C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA21__SIM_M_HSIZE_0                      0x0124 0x046C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA21__VDEC_DEBUG_6                       0x0124 0x046C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA21__MMDC_DEBUG_26                      0x0124 0x046C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22                     0x0128 0x0470 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA22__WEIM_ADDR_22                       0x0128 0x0470 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA22__PWM6_OUT                           0x0128 0x0470 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA22__ENET2_1588_EVENT2_OUT              0x0128 0x0470 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA22__CSI1_DATA_11                       0x0128 0x0470 0x06C8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA22__GPIO3_IO_23                        0x0128 0x0470 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA22__SRC_BT_CFG_30                      0x0128 0x0470 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA22__SIM_M_HSIZE_1                      0x0128 0x0470 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA22__VDEC_DEBUG_7                       0x0128 0x0470 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA22__MMDC_DEBUG_27                      0x0128 0x0470 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23                     0x012C 0x0474 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA23__WEIM_ADDR_23                       0x012C 0x0474 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA23__PWM5_OUT                           0x012C 0x0474 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA23__ENET2_1588_EVENT3_OUT              0x012C 0x0474 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA23__CSI1_DATA_10                       0x012C 0x0474 0x06FC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA23__GPIO3_IO_24                        0x012C 0x0474 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA23__SRC_BT_CFG_31                      0x012C 0x0474 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA23__SIM_M_HSIZE_2                      0x012C 0x0474 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA23__VDEC_DEBUG_8                       0x012C 0x0474 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA23__MMDC_DEBUG_28                      0x012C 0x0474 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE                      0x0130 0x0478 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_RD_E                        0x0130 0x0478 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_ENABLE__AUDMUX_AUD3_TXC                    0x0130 0x0478 0x063C 0x2 0x1
+#define MX6SX_PAD_LCD1_ENABLE__ENET1_1588_EVENT3_IN               0x0130 0x0478 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_ENABLE__CSI1_DATA_17                       0x0130 0x0478 0x06E0 0x4 0x0
+#define MX6SX_PAD_LCD1_ENABLE__GPIO3_IO_25                        0x0130 0x0478 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_ENABLE__USDHC1_CD_B                        0x0130 0x0478 0x0864 0x6 0x0
+#define MX6SX_PAD_LCD1_ENABLE__SIM_M_HADDR_17                     0x0130 0x0478 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_ENABLE__VADC_TEST_1                        0x0130 0x0478 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_ENABLE__MMDC_DEBUG_1                       0x0130 0x0478 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC                        0x0134 0x047C 0x07E0 0x0 0x0
+#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_RS                           0x0134 0x047C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_HSYNC__AUDMUX_AUD3_TXD                     0x0134 0x047C 0x0630 0x2 0x1
+#define MX6SX_PAD_LCD1_HSYNC__ENET2_1588_EVENT2_IN                0x0134 0x047C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_HSYNC__CSI1_DATA_18                        0x0134 0x047C 0x06E4 0x4 0x0
+#define MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26                         0x0134 0x047C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_HSYNC__USDHC2_WP                           0x0134 0x047C 0x0870 0x6 0x0
+#define MX6SX_PAD_LCD1_HSYNC__SIM_M_HADDR_18                      0x0134 0x047C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_HSYNC__VADC_TEST_2                         0x0134 0x047C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_HSYNC__MMDC_DEBUG_2                        0x0134 0x047C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_RESET__LCDIF1_RESET                        0x0138 0x0480 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_RESET__LCDIF1_CS                           0x0138 0x0480 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_RESET__AUDMUX_AUD3_RXD                     0x0138 0x0480 0x062C 0x2 0x1
+#define MX6SX_PAD_LCD1_RESET__KITTEN_EVENTI                       0x0138 0x0480 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_RESET__M4_EVENTI                           0x0138 0x0480 0x0000 0x4 0x0
+#define MX6SX_PAD_LCD1_RESET__GPIO3_IO_27                         0x0138 0x0480 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_RESET__CCM_PMIC_RDY                        0x0138 0x0480 0x069C 0x6 0x0
+#define MX6SX_PAD_LCD1_RESET__SIM_M_HADDR_20                      0x0138 0x0480 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_RESET__VADC_TEST_4                         0x0138 0x0480 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_RESET__MMDC_DEBUG_4                        0x0138 0x0480 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC                        0x013C 0x0484 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_BUSY                         0x013C 0x0484 0x07E0 0x1 0x1
+#define MX6SX_PAD_LCD1_VSYNC__AUDMUX_AUD3_TXFS                    0x013C 0x0484 0x0640 0x2 0x1
+#define MX6SX_PAD_LCD1_VSYNC__ENET2_1588_EVENT3_IN                0x013C 0x0484 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_VSYNC__CSI1_DATA_19                        0x013C 0x0484 0x06E8 0x4 0x0
+#define MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28                         0x013C 0x0484 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_VSYNC__USDHC2_CD_B                         0x013C 0x0484 0x086C 0x6 0x0
+#define MX6SX_PAD_LCD1_VSYNC__SIM_M_HADDR_19                      0x013C 0x0484 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_VSYNC__VADC_TEST_3                         0x013C 0x0484 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_VSYNC__MMDC_DEBUG_3                        0x013C 0x0484 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_ALE__RAWNAND_ALE                           0x0140 0x0488 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_ALE__I2C3_SDA                              0x0140 0x0488 0x07BC 0x1 0x0
+#define MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B                         0x0140 0x0488 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_ALE__ECSPI2_SS0                            0x0140 0x0488 0x072C 0x3 0x0
+#define MX6SX_PAD_NAND_ALE__ESAI_TX3_RX2                          0x0140 0x0488 0x079C 0x4 0x0
+#define MX6SX_PAD_NAND_ALE__GPIO4_IO_0                            0x0140 0x0488 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_ALE__WEIM_CS0_B                            0x0140 0x0488 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_ALE__TPSMP_HDATA_0                         0x0140 0x0488 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_ALE__ANATOP_USBPHY1_TSTI_TX_EN             0x0140 0x0488 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_ALE__SDMA_DEBUG_PC_12                      0x0140 0x0488 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CE0_B__RAWNAND_CE0_B                       0x0144 0x048C 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CE0_B__USDHC2_VSELECT                      0x0144 0x048C 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2                      0x0144 0x048C 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CE0_B__AUDMUX_AUD4_TXC                     0x0144 0x048C 0x0654 0x3 0x0
+#define MX6SX_PAD_NAND_CE0_B__ESAI_TX_CLK                         0x0144 0x048C 0x078C 0x4 0x0
+#define MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1                          0x0144 0x048C 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CE0_B__WEIM_LBA_B                          0x0144 0x048C 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CE0_B__TPSMP_HDATA_3                       0x0144 0x048C 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CE0_B__ANATOP_USBPHY1_TSTI_TX_HIZ          0x0144 0x048C 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CE0_B__SDMA_DEBUG_PC_9                     0x0144 0x048C 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CE1_B__RAWNAND_CE1_B                       0x0148 0x0490 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CE1_B__USDHC3_RESET_B                      0x0148 0x0490 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3                      0x0148 0x0490 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CE1_B__AUDMUX_AUD4_TXD                     0x0148 0x0490 0x0648 0x3 0x0
+#define MX6SX_PAD_NAND_CE1_B__ESAI_TX0                            0x0148 0x0490 0x0790 0x4 0x0
+#define MX6SX_PAD_NAND_CE1_B__GPIO4_IO_2                          0x0148 0x0490 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CE1_B__WEIM_OE                             0x0148 0x0490 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CE1_B__TPSMP_HDATA_4                       0x0148 0x0490 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CE1_B__ANATOP_USBPHY1_TSTI_TX_LS_MODE      0x0148 0x0490 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8                     0x0148 0x0490 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CLE__RAWNAND_CLE                           0x014C 0x0494 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CLE__I2C3_SCL                              0x014C 0x0494 0x07B8 0x1 0x0
+#define MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK                          0x014C 0x0494 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CLE__ECSPI2_SCLK                           0x014C 0x0494 0x0720 0x3 0x0
+#define MX6SX_PAD_NAND_CLE__ESAI_TX2_RX3                          0x014C 0x0494 0x0798 0x4 0x0
+#define MX6SX_PAD_NAND_CLE__GPIO4_IO_3                            0x014C 0x0494 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CLE__WEIM_BCLK                             0x014C 0x0494 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CLE__TPSMP_CLK                             0x014C 0x0494 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CLE__ANATOP_USBPHY1_TSTI_TX_DP             0x014C 0x0494 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CLE__SDMA_DEBUG_PC_13                      0x014C 0x0494 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA00__RAWNAND_DATA00                     0x0150 0x0498 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA00__USDHC1_DATA4                       0x0150 0x0498 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1                     0x0150 0x0498 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA00__ECSPI5_MISO                        0x0150 0x0498 0x0754 0x3 0x0
+#define MX6SX_PAD_NAND_DATA00__ESAI_RX_CLK                        0x0150 0x0498 0x0788 0x4 0x0
+#define MX6SX_PAD_NAND_DATA00__GPIO4_IO_4                         0x0150 0x0498 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA00__WEIM_AD_0                          0x0150 0x0498 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA00__TPSMP_HDATA_7                      0x0150 0x0498 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA00__ANATOP_USBPHY1_TSTO_RX_DISCON_DET  0x0150 0x0498 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA00__SDMA_DEBUG_EVT_CHN_LINES_5         0x0150 0x0498 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA01__RAWNAND_DATA01                     0x0154 0x049C 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA01__USDHC1_DATA5                       0x0154 0x049C 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0                     0x0154 0x049C 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA01__ECSPI5_MOSI                        0x0154 0x049C 0x0758 0x3 0x0
+#define MX6SX_PAD_NAND_DATA01__ESAI_RX_FS                         0x0154 0x049C 0x0778 0x4 0x0
+#define MX6SX_PAD_NAND_DATA01__GPIO4_IO_5                         0x0154 0x049C 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA01__WEIM_AD_1                          0x0154 0x049C 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA01__TPSMP_HDATA_8                      0x0154 0x049C 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA01__ANATOP_USBPHY1_TSTO_RX_HS_RXD      0x0154 0x049C 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA01__SDMA_DEBUG_EVT_CHN_LINES_4         0x0154 0x049C 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA02__RAWNAND_DATA02                     0x0158 0x04A0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA02__USDHC1_DATA6                       0x0158 0x04A0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK                       0x0158 0x04A0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA02__ECSPI5_SCLK                        0x0158 0x04A0 0x0750 0x3 0x0
+#define MX6SX_PAD_NAND_DATA02__ESAI_TX_HF_CLK                     0x0158 0x04A0 0x0784 0x4 0x0
+#define MX6SX_PAD_NAND_DATA02__GPIO4_IO_6                         0x0158 0x04A0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA02__WEIM_AD_2                          0x0158 0x04A0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA02__TPSMP_HDATA_9                      0x0158 0x04A0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA02__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV   0x0158 0x04A0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA02__SDMA_DEBUG_EVT_CHN_LINES_3         0x0158 0x04A0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA03__RAWNAND_DATA03                     0x015C 0x04A4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA03__USDHC1_DATA7                       0x015C 0x04A4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B                      0x015C 0x04A4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA03__ECSPI5_SS0                         0x015C 0x04A4 0x075C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA03__ESAI_RX_HF_CLK                     0x015C 0x04A4 0x0780 0x4 0x0
+#define MX6SX_PAD_NAND_DATA03__GPIO4_IO_7                         0x015C 0x04A4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA03__WEIM_AD_3                          0x015C 0x04A4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA03__TPSMP_HDATA_10                     0x015C 0x04A4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA03__ANATOP_USBPHY1_TSTO_RX_SQUELCH     0x015C 0x04A4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA03__SDMA_DEBUG_EVT_CHN_LINES_6         0x015C 0x04A4 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04                     0x0160 0x04A8 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4                       0x0160 0x04A8 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B                      0x0160 0x04A8 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS                      0x0160 0x04A8 0x083C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA04__UART3_DTE_CTS                      0x0160 0x04A8 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS                   0x0160 0x04A8 0x0650 0x4 0x0
+#define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8                         0x0160 0x04A8 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA04__WEIM_AD_4                          0x0160 0x04A8 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA04__TPSMP_HDATA_11                     0x0160 0x04A8 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA04__ANATOP_USBPHY2_TSTO_RX_SQUELCH     0x0160 0x04A8 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA04__SDMA_DEBUG_CORE_STATE_0            0x0160 0x04A8 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05                     0x0164 0x04AC 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5                       0x0164 0x04AC 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS                        0x0164 0x04AC 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS                      0x0164 0x04AC 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA05__UART3_DTE_RTS                      0x0164 0x04AC 0x083C 0x3 0x1
+#define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                    0x0164 0x04AC 0x064C 0x4 0x0
+#define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9                         0x0164 0x04AC 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA05__WEIM_AD_5                          0x0164 0x04AC 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA05__TPSMP_HDATA_12                     0x0164 0x04AC 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA05__ANATOP_USBPHY2_TSTO_RX_DISCON_DET  0x0164 0x04AC 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA05__SDMA_DEBUG_CORE_STATE_1            0x0164 0x04AC 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06                     0x0168 0x04B0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6                       0x0168 0x04B0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B                      0x0168 0x04B0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_DCE_RX                       0x0168 0x04B0 0x0840 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_DTE_TX                       0x0168 0x04B0 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__PWM3_OUT                           0x0168 0x04B0 0x0000 0x4 0x0
+#define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10                        0x0168 0x04B0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA06__WEIM_AD_6                          0x0168 0x04B0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA06__TPSMP_HDATA_13                     0x0168 0x04B0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA06__ANATOP_USBPHY2_TSTO_RX_FS_RXD      0x0168 0x04B0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA06__SDMA_DEBUG_CORE_STATE_2            0x0168 0x04B0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07                     0x016C 0x04B4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7                       0x016C 0x04B4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS                        0x016C 0x04B4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA07__UART3_DCE_TX                       0x016C 0x04B4 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA07__UART3_DTE_RX                       0x016C 0x04B4 0x0840 0x3 0x1
+#define MX6SX_PAD_NAND_DATA07__PWM4_OUT                           0x016C 0x04B4 0x0000 0x4 0x0
+#define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11                        0x016C 0x04B4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA07__WEIM_AD_7                          0x016C 0x04B4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA07__TPSMP_HDATA_14                     0x016C 0x04B4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA07__ANATOP_USBPHY1_TSTO_RX_FS_RXD      0x016C 0x04B4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA07__SDMA_DEBUG_CORE_STATE_3            0x016C 0x04B4 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_RE_B__RAWNAND_RE_B                         0x0170 0x04B8 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_RE_B__USDHC2_RESET_B                       0x0170 0x04B8 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3                       0x0170 0x04B8 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_RE_B__AUDMUX_AUD4_TXFS                     0x0170 0x04B8 0x0658 0x3 0x0
+#define MX6SX_PAD_NAND_RE_B__ESAI_TX_FS                           0x0170 0x04B8 0x077C 0x4 0x0
+#define MX6SX_PAD_NAND_RE_B__GPIO4_IO_12                          0x0170 0x04B8 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_RE_B__WEIM_RW                              0x0170 0x04B8 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_RE_B__TPSMP_HDATA_5                        0x0170 0x04B8 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_RE_B__ANATOP_USBPHY2_TSTO_RX_HS_RXD        0x0170 0x04B8 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_RE_B__SDMA_DEBUG_PC_7                      0x0170 0x04B8 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_READY_B__RAWNAND_READY_B                   0x0174 0x04BC 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_READY_B__USDHC1_VSELECT                    0x0174 0x04BC 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1                    0x0174 0x04BC 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_READY_B__ECSPI2_MISO                       0x0174 0x04BC 0x0724 0x3 0x0
+#define MX6SX_PAD_NAND_READY_B__ESAI_TX1                          0x0174 0x04BC 0x0794 0x4 0x0
+#define MX6SX_PAD_NAND_READY_B__GPIO4_IO_13                       0x0174 0x04BC 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_READY_B__WEIM_EB_B_1                       0x0174 0x04BC 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_READY_B__TPSMP_HDATA_2                     0x0174 0x04BC 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_READY_B__ANATOP_USBPHY1_TSTI_TX_DN         0x0174 0x04BC 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_READY_B__SDMA_DEBUG_PC_10                  0x0174 0x04BC 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_WE_B__RAWNAND_WE_B                         0x0178 0x04C0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_WE_B__USDHC4_VSELECT                       0x0178 0x04C0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2                       0x0178 0x04C0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_WE_B__AUDMUX_AUD4_RXD                      0x0178 0x04C0 0x0644 0x3 0x0
+#define MX6SX_PAD_NAND_WE_B__ESAI_TX5_RX0                         0x0178 0x04C0 0x07A4 0x4 0x0
+#define MX6SX_PAD_NAND_WE_B__GPIO4_IO_14                          0x0178 0x04C0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_WE_B__WEIM_WAIT                            0x0178 0x04C0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_WE_B__TPSMP_HDATA_6                        0x0178 0x04C0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_WE_B__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV     0x0178 0x04C0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_WE_B__SDMA_DEBUG_PC_6                      0x0178 0x04C0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_WP_B__RAWNAND_WP_B                         0x017C 0x04C4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_WP_B__USDHC1_RESET_B                       0x017C 0x04C4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0                       0x017C 0x04C4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_WP_B__ECSPI2_MOSI                          0x017C 0x04C4 0x0728 0x3 0x0
+#define MX6SX_PAD_NAND_WP_B__ESAI_TX4_RX1                         0x017C 0x04C4 0x07A0 0x4 0x0
+#define MX6SX_PAD_NAND_WP_B__GPIO4_IO_15                          0x017C 0x04C4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_WP_B__WEIM_EB_B_0                          0x017C 0x04C4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_WP_B__TPSMP_HDATA_1                        0x017C 0x04C4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_WP_B__ANATOP_USBPHY1_TSTI_TX_HS_MODE       0x017C 0x04C4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_WP_B__SDMA_DEBUG_PC_11                     0x017C 0x04C4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0                    0x0180 0x04C8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC                       0x0180 0x04C8 0x085C 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA0__ECSPI1_MOSI                       0x0180 0x04C8 0x0718 0x2 0x1
+#define MX6SX_PAD_QSPI1A_DATA0__ESAI_TX4_RX1                      0x0180 0x04C8 0x07A0 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA0__CSI1_DATA_14                      0x0180 0x04C8 0x06D4 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16                       0x0180 0x04C8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__WEIM_DATA_6                       0x0180 0x04C8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__SIM_M_HADDR_3                     0x0180 0x04C8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__SDMA_DEBUG_BUS_DEVICE_3           0x0180 0x04C8 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1                    0x0184 0x04CC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__ANATOP_OTG1_ID                    0x0184 0x04CC 0x0624 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA1__ECSPI1_MISO                       0x0184 0x04CC 0x0714 0x2 0x1
+#define MX6SX_PAD_QSPI1A_DATA1__ESAI_TX1                          0x0184 0x04CC 0x0794 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA1__CSI1_DATA_13                      0x0184 0x04CC 0x06D0 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17                       0x0184 0x04CC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__WEIM_DATA_5                       0x0184 0x04CC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__SIM_M_HADDR_4                     0x0184 0x04CC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__SDMA_DEBUG_PC_0                   0x0184 0x04CC 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2                    0x0188 0x04D0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__USB_OTG1_PWR                      0x0188 0x04D0 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__ECSPI5_SS1                        0x0188 0x04D0 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__ESAI_TX_CLK                       0x0188 0x04D0 0x078C 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA2__CSI1_DATA_12                      0x0188 0x04D0 0x06CC 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18                       0x0188 0x04D0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__WEIM_DATA_4                       0x0188 0x04D0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__SIM_M_HADDR_6                     0x0188 0x04D0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__SDMA_DEBUG_PC_1                   0x0188 0x04D0 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3                    0x018C 0x04D4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__USB_OTG1_OC                       0x018C 0x04D4 0x0860 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA3__ECSPI5_SS2                        0x018C 0x04D4 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__ESAI_TX0                          0x018C 0x04D4 0x0790 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA3__CSI1_DATA_11                      0x018C 0x04D4 0x06C8 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19                       0x018C 0x04D4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__WEIM_DATA_3                       0x018C 0x04D4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__SIM_M_HADDR_7                     0x018C 0x04D4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__SDMA_DEBUG_PC_2                   0x018C 0x04D4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DQS__QSPI1_A_DQS                         0x0190 0x04D8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DQS__CAN2_TX                             0x0190 0x04D8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_DQS__CANFD_TX2                           0x0190 0x04D8 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DQS__ECSPI5_MOSI                         0x0190 0x04D8 0x0758 0x3 0x1
+#define MX6SX_PAD_QSPI1A_DQS__CSI1_DATA_15                        0x0190 0x04D8 0x06D8 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DQS__GPIO4_IO_20                         0x0190 0x04D8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DQS__WEIM_DATA_7                         0x0190 0x04D8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DQS__SIM_M_HADDR_13                      0x0190 0x04D8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DQS__SDMA_DEBUG_BUS_DEVICE_4             0x0190 0x04D8 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK                       0x0194 0x04DC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__ANATOP_OTG2_ID                     0x0194 0x04DC 0x0628 0x1 0x2
+#define MX6SX_PAD_QSPI1A_SCLK__ECSPI1_SCLK                        0x0194 0x04DC 0x0710 0x2 0x1
+#define MX6SX_PAD_QSPI1A_SCLK__ESAI_TX2_RX3                       0x0194 0x04DC 0x0798 0x3 0x2
+#define MX6SX_PAD_QSPI1A_SCLK__CSI1_DATA_1                        0x0194 0x04DC 0x06A4 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21                        0x0194 0x04DC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__WEIM_DATA_0                        0x0194 0x04DC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__SIM_M_HADDR_0                      0x0194 0x04DC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__SDMA_DEBUG_PC_5                    0x0194 0x04DC 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B                     0x0198 0x04E0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__USB_OTG2_PWR                      0x0198 0x04E0 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__ECSPI1_SS0                        0x0198 0x04E0 0x071C 0x2 0x1
+#define MX6SX_PAD_QSPI1A_SS0_B__ESAI_TX3_RX2                      0x0198 0x04E0 0x079C 0x3 0x2
+#define MX6SX_PAD_QSPI1A_SS0_B__CSI1_DATA_0                       0x0198 0x04E0 0x06A0 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22                       0x0198 0x04E0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__WEIM_DATA_1                       0x0198 0x04E0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__SIM_M_HADDR_1                     0x0198 0x04E0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__SDMA_DEBUG_PC_4                   0x0198 0x04E0 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__QSPI1_A_SS1_B                     0x019C 0x04E4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX                           0x019C 0x04E4 0x068C 0x1 0x2
+#define MX6SX_PAD_QSPI1A_SS1_B__CANFD_RX1                         0x019C 0x04E4 0x0694 0x2 0x2
+#define MX6SX_PAD_QSPI1A_SS1_B__ECSPI5_MISO                       0x019C 0x04E4 0x0754 0x3 0x1
+#define MX6SX_PAD_QSPI1A_SS1_B__CSI1_DATA_10                      0x019C 0x04E4 0x06FC 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SS1_B__GPIO4_IO_23                       0x019C 0x04E4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__WEIM_DATA_2                       0x019C 0x04E4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                    0x019C 0x04E4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                   0x019C 0x04E4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                    0x01A0 0x04E8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS                     0x01A0 0x04E8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_DTE_RTS                     0x01A0 0x04E8 0x083C 0x1 0x4
+#define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI                       0x01A0 0x04E8 0x0738 0x2 0x1
+#define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS                        0x01A0 0x04E8 0x0778 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22                      0x01A0 0x04E8 0x06F4 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24                       0x01A0 0x04E8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14                      0x01A0 0x04E8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9                     0x01A0 0x04E8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1                    0x01A4 0x04EC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS                     0x01A4 0x04EC 0x083C 0x1 0x5
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_DTE_CTS                     0x01A4 0x04EC 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO                       0x01A4 0x04EC 0x0734 0x2 0x1
+#define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK                       0x01A4 0x04EC 0x0788 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21                      0x01A4 0x04EC 0x06F0 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25                       0x01A4 0x04EC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__WEIM_DATA_13                      0x01A4 0x04EC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__SIM_M_HADDR_8                     0x01A4 0x04EC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2                    0x01A8 0x04F0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__I2C2_SDA                          0x01A8 0x04F0 0x07B4 0x1 0x2
+#define MX6SX_PAD_QSPI1B_DATA2__ECSPI5_RDY                        0x01A8 0x04F0 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__ESAI_TX5_RX0                      0x01A8 0x04F0 0x07A4 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA2__CSI1_DATA_20                      0x01A8 0x04F0 0x06EC 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26                       0x01A8 0x04F0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__WEIM_DATA_12                      0x01A8 0x04F0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__SIM_M_HADDR_5                     0x01A8 0x04F0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3                    0x01AC 0x04F4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__I2C2_SCL                          0x01AC 0x04F4 0x07B0 0x1 0x2
+#define MX6SX_PAD_QSPI1B_DATA3__ECSPI5_SS3                        0x01AC 0x04F4 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__ESAI_TX_FS                        0x01AC 0x04F4 0x077C 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA3__CSI1_DATA_19                      0x01AC 0x04F4 0x06E8 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27                       0x01AC 0x04F4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__WEIM_DATA_11                      0x01AC 0x04F4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__SIM_M_HADDR_2                     0x01AC 0x04F4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DQS__QSPI1_B_DQS                         0x01B0 0x04F8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DQS__CAN1_TX                             0x01B0 0x04F8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DQS__CANFD_TX1                           0x01B0 0x04F8 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DQS__ECSPI5_SS0                          0x01B0 0x04F8 0x075C 0x3 0x1
+#define MX6SX_PAD_QSPI1B_DQS__CSI1_DATA_23                        0x01B0 0x04F8 0x06F8 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DQS__GPIO4_IO_28                         0x01B0 0x04F8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15                        0x01B0 0x04F8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15                      0x01B0 0x04F8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK                       0x01B4 0x04FC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX                       0x01B4 0x04FC 0x0840 0x1 0x4
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX                       0x01B4 0x04FC 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK                        0x01B4 0x04FC 0x0730 0x2 0x1
+#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK                     0x01B4 0x04FC 0x0780 0x3 0x2
+#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16                       0x01B4 0x04FC 0x06DC 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SCLK__GPIO4_IO_29                        0x01B4 0x04FC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8                        0x01B4 0x04FC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11                     0x01B4 0x04FC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B                     0x01B8 0x0500 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX                      0x01B8 0x0500 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX                      0x01B8 0x0500 0x0840 0x1 0x5
+#define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0                        0x01B8 0x0500 0x073C 0x2 0x1
+#define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK                    0x01B8 0x0500 0x0784 0x3 0x3
+#define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17                      0x01B8 0x0500 0x06E0 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SS0_B__GPIO4_IO_30                       0x01B8 0x0500 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__WEIM_DATA_9                       0x01B8 0x0500 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__SIM_M_HADDR_10                    0x01B8 0x0500 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__QSPI1_B_SS1_B                     0x01BC 0x0504 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX                           0x01BC 0x0504 0x0690 0x1 0x2
+#define MX6SX_PAD_QSPI1B_SS1_B__CANFD_RX2                         0x01BC 0x0504 0x0698 0x2 0x2
+#define MX6SX_PAD_QSPI1B_SS1_B__ECSPI5_SCLK                       0x01BC 0x0504 0x0750 0x3 0x1
+#define MX6SX_PAD_QSPI1B_SS1_B__CSI1_DATA_18                      0x01BC 0x0504 0x06E4 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SS1_B__GPIO4_IO_31                       0x01BC 0x0504 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__WEIM_DATA_10                      0x01BC 0x0504 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__SIM_M_HADDR_14                    0x01BC 0x0504 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0                     0x01C0 0x0508 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD0__GPIO5_IO_0                          0x01C0 0x0508 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD0__CSI2_DATA_10                        0x01C0 0x0508 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD0__ANATOP_TESTI_0                      0x01C0 0x0508 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD0__RAWNAND_TESTER_TRIGGER              0x01C0 0x0508 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD0__PCIE_CTRL_DEBUG_0                   0x01C0 0x0508 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1                     0x01C4 0x050C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD1__GPIO5_IO_1                          0x01C4 0x050C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD1__CSI2_DATA_11                        0x01C4 0x050C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD1__ANATOP_TESTI_1                      0x01C4 0x050C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD1__USDHC1_TESTER_TRIGGER               0x01C4 0x050C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD1__PCIE_CTRL_DEBUG_1                   0x01C4 0x050C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2                     0x01C8 0x0510 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD2__GPIO5_IO_2                          0x01C8 0x0510 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD2__CSI2_DATA_12                        0x01C8 0x0510 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD2__ANATOP_TESTI_2                      0x01C8 0x0510 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD2__USDHC2_TESTER_TRIGGER               0x01C8 0x0510 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD2__PCIE_CTRL_DEBUG_2                   0x01C8 0x0510 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3                     0x01CC 0x0514 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD3__GPIO5_IO_3                          0x01CC 0x0514 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD3__CSI2_DATA_13                        0x01CC 0x0514 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD3__ANATOP_TESTI_3                      0x01CC 0x0514 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD3__USDHC3_TESTER_TRIGGER               0x01CC 0x0514 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD3__PCIE_CTRL_DEBUG_3                   0x01CC 0x0514 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN                      0x01D0 0x0518 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__GPIO5_IO_4                       0x01D0 0x0518 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__CSI2_DATA_14                     0x01D0 0x0518 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__ANATOP_TESTO_0                   0x01D0 0x0518 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__USDHC4_TESTER_TRIGGER            0x01D0 0x0518 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__PCIE_CTRL_DEBUG_4                0x01D0 0x0518 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK                        0x01D4 0x051C 0x0768 0x0 0x1
+#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER                         0x01D4 0x051C 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII1_RXC__GPIO5_IO_5                          0x01D4 0x051C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RXC__CSI2_DATA_15                        0x01D4 0x051C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RXC__ANATOP_TESTO_1                      0x01D4 0x051C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RXC__ECSPI1_TESTER_TRIGGER               0x01D4 0x051C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RXC__PCIE_CTRL_DEBUG_5                   0x01D4 0x051C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0                     0x01D8 0x0520 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD0__SAI2_RX_SYNC                        0x01D8 0x0520 0x0810 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD0__GPIO5_IO_6                          0x01D8 0x0520 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD0__CSI2_DATA_16                        0x01D8 0x0520 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD0__ANATOP_TESTO_2                      0x01D8 0x0520 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD0__ECSPI2_TESTER_TRIGGER               0x01D8 0x0520 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD0__PCIE_CTRL_DEBUG_6                   0x01D8 0x0520 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1                     0x01DC 0x0524 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD1__SAI2_RX_BCLK                        0x01DC 0x0524 0x0808 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD1__GPIO5_IO_7                          0x01DC 0x0524 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD1__CSI2_DATA_17                        0x01DC 0x0524 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD1__ANATOP_TESTO_3                      0x01DC 0x0524 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD1__ECSPI3_TESTER_TRIGGER               0x01DC 0x0524 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD1__PCIE_CTRL_DEBUG_7                   0x01DC 0x0524 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2                     0x01E0 0x0528 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD2__SAI2_TX_SYNC                        0x01E0 0x0528 0x0818 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD2__GPIO5_IO_8                          0x01E0 0x0528 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD2__CSI2_DATA_18                        0x01E0 0x0528 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD2__ANATOP_TESTO_4                      0x01E0 0x0528 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD2__ECSPI4_TESTER_TRIGGER               0x01E0 0x0528 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD2__PCIE_CTRL_DEBUG_8                   0x01E0 0x0528 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3                     0x01E4 0x052C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD3__SAI2_TX_BCLK                        0x01E4 0x052C 0x0814 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9                          0x01E4 0x052C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD3__CSI2_DATA_19                        0x01E4 0x052C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD3__ANATOP_TESTO_5                      0x01E4 0x052C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD3__ECSPI5_TESTER_TRIGGER               0x01E4 0x052C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD3__PCIE_CTRL_DEBUG_9                   0x01E4 0x052C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN                      0x01E8 0x0530 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__SAI2_RX_DATA_0                   0x01E8 0x0530 0x080C 0x2 0x1
+#define MX6SX_PAD_RGMII1_TX_CTL__GPIO5_IO_10                      0x01E8 0x0530 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__CSI2_DATA_0                      0x01E8 0x0530 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__ANATOP_TESTO_6                   0x01E8 0x0530 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__QSPI1_TESTER_TRIGGER             0x01E8 0x0530 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__PCIE_CTRL_DEBUG_10               0x01E8 0x0530 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC                     0x01EC 0x0534 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TXC__ENET1_TX_ER                         0x01EC 0x0534 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII1_TXC__SAI2_TX_DATA_0                      0x01EC 0x0534 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII1_TXC__GPIO5_IO_11                         0x01EC 0x0534 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TXC__CSI2_DATA_1                         0x01EC 0x0534 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TXC__ANATOP_TESTO_7                      0x01EC 0x0534 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TXC__QSPI2_TESTER_TRIGGER                0x01EC 0x0534 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TXC__PCIE_CTRL_DEBUG_11                  0x01EC 0x0534 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0                     0x01F0 0x0538 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD0__PWM4_OUT                            0x01F0 0x0538 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD0__GPIO5_IO_12                         0x01F0 0x0538 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD0__CSI2_DATA_2                         0x01F0 0x0538 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD0__ANATOP_TESTO_8                      0x01F0 0x0538 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD0__VDEC_DEBUG_18                       0x01F0 0x0538 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD0__PCIE_CTRL_DEBUG_12                  0x01F0 0x0538 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1                     0x01F4 0x053C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD1__PWM3_OUT                            0x01F4 0x053C 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD1__GPIO5_IO_13                         0x01F4 0x053C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD1__CSI2_DATA_3                         0x01F4 0x053C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD1__ANATOP_TESTO_9                      0x01F4 0x053C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD1__VDEC_DEBUG_19                       0x01F4 0x053C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD1__PCIE_CTRL_DEBUG_13                  0x01F4 0x053C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2                     0x01F8 0x0540 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD2__PWM2_OUT                            0x01F8 0x0540 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD2__GPIO5_IO_14                         0x01F8 0x0540 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD2__CSI2_DATA_4                         0x01F8 0x0540 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD2__ANATOP_TESTO_10                     0x01F8 0x0540 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD2__VDEC_DEBUG_20                       0x01F8 0x0540 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD2__PCIE_CTRL_DEBUG_14                  0x01F8 0x0540 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3                     0x01FC 0x0544 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD3__PWM1_OUT                            0x01FC 0x0544 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD3__GPIO5_IO_15                         0x01FC 0x0544 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD3__CSI2_DATA_5                         0x01FC 0x0544 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD3__ANATOP_TESTO_11                     0x01FC 0x0544 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD3__VDEC_DEBUG_21                       0x01FC 0x0544 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD3__PCIE_CTRL_DEBUG_15                  0x01FC 0x0544 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN                      0x0200 0x0548 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__GPIO5_IO_16                      0x0200 0x0548 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__CSI2_DATA_6                      0x0200 0x0548 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__ANATOP_TESTO_12                  0x0200 0x0548 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__VDEC_DEBUG_22                    0x0200 0x0548 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__PCIE_CTRL_DEBUG_16               0x0200 0x0548 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK                        0x0204 0x054C 0x0774 0x0 0x1
+#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_ER                         0x0204 0x054C 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII2_RXC__GPIO5_IO_17                         0x0204 0x054C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RXC__CSI2_DATA_7                         0x0204 0x054C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RXC__ANATOP_TESTO_13                     0x0204 0x054C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RXC__VDEC_DEBUG_23                       0x0204 0x054C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RXC__PCIE_CTRL_DEBUG_17                  0x0204 0x054C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0                     0x0208 0x0550 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD0__SAI1_RX_SYNC                        0x0208 0x0550 0x07FC 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD0__PWM8_OUT                            0x0208 0x0550 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD0__GPIO5_IO_18                         0x0208 0x0550 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD0__CSI2_DATA_8                         0x0208 0x0550 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD0__ANATOP_TESTO_14                     0x0208 0x0550 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD0__VDEC_DEBUG_24                       0x0208 0x0550 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD0__PCIE_CTRL_DEBUG_18                  0x0208 0x0550 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1                     0x020C 0x0554 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD1__SAI1_RX_BCLK                        0x020C 0x0554 0x07F4 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD1__PWM7_OUT                            0x020C 0x0554 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD1__GPIO5_IO_19                         0x020C 0x0554 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD1__CSI2_DATA_9                         0x020C 0x0554 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD1__ANATOP_TESTO_15                     0x020C 0x0554 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD1__VDEC_DEBUG_25                       0x020C 0x0554 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD1__PCIE_CTRL_DEBUG_19                  0x020C 0x0554 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2                     0x0210 0x0558 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD2__SAI1_TX_SYNC                        0x0210 0x0558 0x0804 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD2__PWM6_OUT                            0x0210 0x0558 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD2__GPIO5_IO_20                         0x0210 0x0558 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD2__CSI2_VSYNC                          0x0210 0x0558 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD2__SJC_FAIL                            0x0210 0x0558 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD2__VDEC_DEBUG_26                       0x0210 0x0558 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD2__PCIE_CTRL_DEBUG_20                  0x0210 0x0558 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3                     0x0214 0x055C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD3__SAI1_TX_BCLK                        0x0214 0x055C 0x0800 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD3__PWM5_OUT                            0x0214 0x055C 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21                         0x0214 0x055C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD3__CSI2_HSYNC                          0x0214 0x055C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD3__SJC_JTAG_ACT                        0x0214 0x055C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD3__VDEC_DEBUG_27                       0x0214 0x055C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD3__PCIE_CTRL_DEBUG_21                  0x0214 0x055C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN                      0x0218 0x0560 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__SAI1_RX_DATA_0                   0x0218 0x0560 0x07F8 0x2 0x1
+#define MX6SX_PAD_RGMII2_TX_CTL__GPIO5_IO_22                      0x0218 0x0560 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__CSI2_FIELD                       0x0218 0x0560 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__SJC_DE_B                         0x0218 0x0560 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__VDEC_DEBUG_28                    0x0218 0x0560 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__PCIE_CTRL_DEBUG_22               0x0218 0x0560 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC                     0x021C 0x0564 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TXC__ENET2_TX_ER                         0x021C 0x0564 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII2_TXC__SAI1_TX_DATA_0                      0x021C 0x0564 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_TXC__GPIO5_IO_23                         0x021C 0x0564 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TXC__CSI2_PIXCLK                         0x021C 0x0564 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TXC__SJC_DONE                            0x021C 0x0564 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TXC__VDEC_DEBUG_29                       0x021C 0x0564 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TXC__PCIE_CTRL_DEBUG_23                  0x021C 0x0564 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_CLK__USDHC1_CLK                             0x0220 0x0568 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_CLK__AUDMUX_AUD5_RXFS                       0x0220 0x0568 0x0668 0x1 0x1
+#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_B                           0x0220 0x0568 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_CLK__GPT_CLK                                0x0220 0x0568 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_RST_B_DEB                   0x0220 0x0568 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_CLK__GPIO6_IO_0                             0x0220 0x0568 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_CLK__ENET2_1588_EVENT1_OUT                  0x0220 0x0568 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_CLK__CCM_OUT1                               0x0220 0x0568 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_CLK__VADC_ADC_PROC_CLK                      0x0220 0x0568 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_CLK__MMDC_DEBUG_45                          0x0220 0x0568 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_CMD__USDHC1_CMD                             0x0224 0x056C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_CMD__AUDMUX_AUD5_RXC                        0x0224 0x056C 0x0664 0x1 0x1
+#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_B                           0x0224 0x056C 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_CMD__GPT_COMPARE1                           0x0224 0x056C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_RST_B_DEB                   0x0224 0x056C 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_CMD__GPIO6_IO_1                             0x0224 0x056C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_CMD__ENET2_1588_EVENT1_IN                   0x0224 0x056C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_CMD__CCM_CLKO1                              0x0224 0x056C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_CMD__VADC_EXT_SYSCLK                        0x0224 0x056C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_CMD__MMDC_DEBUG_46                          0x0224 0x056C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA0__USDHC1_DATA0                         0x0228 0x0570 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD                      0x0228 0x0570 0x065C 0x1 0x1
+#define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS             0x0228 0x0570 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1                         0x0228 0x0570 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA0__UART2_DCE_RX                         0x0228 0x0570 0x0838 0x4 0x2
+#define MX6SX_PAD_SD1_DATA0__UART2_DTE_TX                         0x0228 0x0570 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2                           0x0228 0x0570 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN                 0x0228 0x0570 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA0__CCM_OUT2                             0x0228 0x0570 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA0__VADC_CLAMP_UP                        0x0228 0x0570 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA0__MMDC_DEBUG_48                        0x0228 0x0570 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA1__USDHC1_DATA1                         0x022C 0x0574 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC                      0x022C 0x0574 0x066C 0x1 0x1
+#define MX6SX_PAD_SD1_DATA1__PWM4_OUT                             0x022C 0x0574 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2                         0x022C 0x0574 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA1__UART2_DCE_TX                         0x022C 0x0574 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA1__UART2_DTE_RX                         0x022C 0x0574 0x0838 0x4 0x3
+#define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3                           0x022C 0x0574 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT                0x022C 0x0574 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA1__CCM_CLKO2                            0x022C 0x0574 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA1__VADC_CLAMP_DOWN                      0x022C 0x0574 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA1__MMDC_DEBUG_47                        0x022C 0x0574 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA2__USDHC1_DATA2                         0x0230 0x0578 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                     0x0230 0x0578 0x0670 0x1 0x1
+#define MX6SX_PAD_SD1_DATA2__PWM3_OUT                             0x0230 0x0578 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2                         0x0230 0x0578 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS                        0x0230 0x0578 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA2__UART2_DTE_RTS                        0x0230 0x0578 0x0834 0x4 0x2
+#define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4                           0x0230 0x0578 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY                           0x0230 0x0578 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA2__CCM_OUT0                             0x0230 0x0578 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA2__VADC_EXT_PD_N                        0x0230 0x0578 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA3__USDHC1_DATA3                         0x0234 0x057C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD                      0x0234 0x057C 0x0660 0x1 0x1
+#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD                      0x0234 0x057C 0x065C 0x2 0x2
+#define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3                         0x0234 0x057C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS                        0x0234 0x057C 0x0834 0x4 0x3
+#define MX6SX_PAD_SD1_DATA3__UART2_DTE_CTS                        0x0234 0x057C 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5                           0x0234 0x057C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1                           0x0234 0x057C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY                         0x0234 0x057C 0x069C 0x7 0x2
+#define MX6SX_PAD_SD1_DATA3__VADC_RST_N                           0x0234 0x057C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CLK__USDHC2_CLK                             0x0238 0x0580 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_CLK__AUDMUX_AUD6_RXFS                       0x0238 0x0580 0x0680 0x1 0x2
+#define MX6SX_PAD_SD2_CLK__KPP_COL_5                              0x0238 0x0580 0x07C8 0x2 0x1
+#define MX6SX_PAD_SD2_CLK__ECSPI4_SCLK                            0x0238 0x0580 0x0740 0x3 0x1
+#define MX6SX_PAD_SD2_CLK__MLB_SIG                                0x0238 0x0580 0x07F0 0x4 0x2
+#define MX6SX_PAD_SD2_CLK__GPIO6_IO_6                             0x0238 0x0580 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_CLK__MQS_RIGHT                              0x0238 0x0580 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_CLK__WDOG1_WDOG_ANY                         0x0238 0x0580 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_CLK__VADC_CLAMP_CURRENT_5                   0x0238 0x0580 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CLK__MMDC_DEBUG_29                          0x0238 0x0580 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_CMD__USDHC2_CMD                             0x023C 0x0584 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_CMD__AUDMUX_AUD6_RXC                        0x023C 0x0584 0x067C 0x1 0x2
+#define MX6SX_PAD_SD2_CMD__KPP_ROW_5                              0x023C 0x0584 0x07D4 0x2 0x1
+#define MX6SX_PAD_SD2_CMD__ECSPI4_MOSI                            0x023C 0x0584 0x0748 0x3 0x1
+#define MX6SX_PAD_SD2_CMD__MLB_CLK                                0x023C 0x0584 0x07E8 0x4 0x2
+#define MX6SX_PAD_SD2_CMD__GPIO6_IO_7                             0x023C 0x0584 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_CMD__MQS_LEFT                               0x023C 0x0584 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_CMD__WDOG3_WDOG_B                           0x023C 0x0584 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_CMD__VADC_CLAMP_CURRENT_4                   0x023C 0x0584 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CMD__MMDC_DEBUG_30                          0x023C 0x0584 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA0__USDHC2_DATA0                         0x0240 0x0588 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA0__AUDMUX_AUD6_RXD                      0x0240 0x0588 0x0674 0x1 0x2
+#define MX6SX_PAD_SD2_DATA0__KPP_ROW_7                            0x0240 0x0588 0x07DC 0x2 0x1
+#define MX6SX_PAD_SD2_DATA0__PWM1_OUT                             0x0240 0x0588 0x0000 0x3 0x0
+#define MX6SX_PAD_SD2_DATA0__I2C4_SDA                             0x0240 0x0588 0x07C4 0x4 0x3
+#define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8                           0x0240 0x0588 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3                           0x0240 0x0588 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA0__UART4_DCE_RX                         0x0240 0x0588 0x0848 0x7 0x4
+#define MX6SX_PAD_SD2_DATA0__UART4_DTE_TX                         0x0240 0x0588 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0                 0x0240 0x0588 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50                        0x0240 0x0588 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1                         0x0244 0x058C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA1__AUDMUX_AUD6_TXC                      0x0244 0x058C 0x0684 0x1 0x2
+#define MX6SX_PAD_SD2_DATA1__KPP_COL_7                            0x0244 0x058C 0x07D0 0x2 0x1
+#define MX6SX_PAD_SD2_DATA1__PWM2_OUT                             0x0244 0x058C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD2_DATA1__I2C4_SCL                             0x0244 0x058C 0x07C0 0x4 0x3
+#define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9                           0x0244 0x058C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2                           0x0244 0x058C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA1__UART4_DCE_TX                         0x0244 0x058C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA1__UART4_DTE_RX                         0x0244 0x058C 0x0848 0x7 0x5
+#define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1                 0x0244 0x058C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49                        0x0244 0x058C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2                         0x0248 0x0590 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA2__AUDMUX_AUD6_TXFS                     0x0248 0x0590 0x0688 0x1 0x2
+#define MX6SX_PAD_SD2_DATA2__KPP_ROW_6                            0x0248 0x0590 0x07D8 0x2 0x1
+#define MX6SX_PAD_SD2_DATA2__ECSPI4_SS0                           0x0248 0x0590 0x074C 0x3 0x1
+#define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0                     0x0248 0x0590 0x081C 0x4 0x2
+#define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10                          0x0248 0x0590 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA2__SPDIF_OUT                            0x0248 0x0590 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA2__UART6_DCE_RX                         0x0248 0x0590 0x0858 0x7 0x4
+#define MX6SX_PAD_SD2_DATA2__UART6_DTE_TX                         0x0248 0x0590 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2                 0x0248 0x0590 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32                        0x0248 0x0590 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3                         0x024C 0x0594 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA3__AUDMUX_AUD6_TXD                      0x024C 0x0594 0x0678 0x1 0x2
+#define MX6SX_PAD_SD2_DATA3__KPP_COL_6                            0x024C 0x0594 0x07CC 0x2 0x1
+#define MX6SX_PAD_SD2_DATA3__ECSPI4_MISO                          0x024C 0x0594 0x0744 0x3 0x1
+#define MX6SX_PAD_SD2_DATA3__MLB_DATA                             0x024C 0x0594 0x07EC 0x4 0x2
+#define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11                          0x024C 0x0594 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA3__SPDIF_IN                             0x024C 0x0594 0x0824 0x6 0x4
+#define MX6SX_PAD_SD2_DATA3__UART6_DCE_TX                         0x024C 0x0594 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA3__UART6_DTE_RX                         0x024C 0x0594 0x0858 0x7 0x5
+#define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                 0x024C 0x0594 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31                        0x024C 0x0594 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_CLK__USDHC3_CLK                             0x0250 0x0598 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_DCE_CTS                          0x0250 0x0598 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_DTE_RTS                          0x0250 0x0598 0x0844 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK                            0x0250 0x0598 0x0740 0x2 0x0
+#define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                       0x0250 0x0598 0x0680 0x3 0x0
+#define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC                           0x0250 0x0598 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_CLK__GPIO7_IO_0                             0x0250 0x0598 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_CLK__LCDIF2_BUSY                            0x0250 0x0598 0x07E4 0x6 0x0
+#define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29                         0x0250 0x0598 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5             0x0250 0x0598 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_CMD__USDHC3_CMD                             0x0254 0x059C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_DCE_TX                           0x0254 0x059C 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_DTE_RX                           0x0254 0x059C 0x0848 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI                            0x0254 0x059C 0x0748 0x2 0x0
+#define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC                        0x0254 0x059C 0x067C 0x3 0x0
+#define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC                           0x0254 0x059C 0x07E4 0x4 0x1
+#define MX6SX_PAD_SD3_CMD__GPIO7_IO_1                             0x0254 0x059C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_CMD__LCDIF2_RS                              0x0254 0x059C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_CMD__TPSMP_HDATA_28                         0x0254 0x059C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4             0x0254 0x059C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA0__USDHC3_DATA0                         0x0258 0x05A0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA0__I2C4_SCL                             0x0258 0x05A0 0x07C0 0x1 0x0
+#define MX6SX_PAD_SD3_DATA0__ECSPI2_SS1                           0x0258 0x05A0 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA0__AUDMUX_AUD6_RXD                      0x0258 0x05A0 0x0674 0x3 0x0
+#define MX6SX_PAD_SD3_DATA0__LCDIF2_DATA_1                        0x0258 0x05A0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA0__GPIO7_IO_2                           0x0258 0x05A0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA0__DCIC1_OUT                            0x0258 0x05A0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA0__TPSMP_HDATA_30                       0x0258 0x05A0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA0__GPU_DEBUG_0                          0x0258 0x05A0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0           0x0258 0x05A0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA1__USDHC3_DATA1                         0x025C 0x05A4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA1__I2C4_SDA                             0x025C 0x05A4 0x07C4 0x1 0x0
+#define MX6SX_PAD_SD3_DATA1__ECSPI2_SS2                           0x025C 0x05A4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA1__AUDMUX_AUD6_TXC                      0x025C 0x05A4 0x0684 0x3 0x0
+#define MX6SX_PAD_SD3_DATA1__LCDIF2_DATA_0                        0x025C 0x05A4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA1__GPIO7_IO_3                           0x025C 0x05A4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA1__DCIC2_OUT                            0x025C 0x05A4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA1__TPSMP_HDATA_31                       0x025C 0x05A4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1                          0x025C 0x05A4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1           0x025C 0x05A4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2                         0x0260 0x05A8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS                        0x0260 0x05A8 0x0844 0x1 0x1
+#define MX6SX_PAD_SD3_DATA2__UART4_DTE_CTS                        0x0260 0x05A8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0                           0x0260 0x05A8 0x074C 0x2 0x0
+#define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS                     0x0260 0x05A8 0x0688 0x3 0x0
+#define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK                           0x0260 0x05A8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA2__GPIO7_IO_4                           0x0260 0x05A8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA2__LCDIF2_WR_RWN                        0x0260 0x05A8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA2__TPSMP_HDATA_26                       0x0260 0x05A8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2                          0x0260 0x05A8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2           0x0260 0x05A8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3                         0x0264 0x05AC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA3__UART4_DCE_RX                         0x0264 0x05AC 0x0848 0x1 0x1
+#define MX6SX_PAD_SD3_DATA3__UART4_DTE_TX                         0x0264 0x05AC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO                          0x0264 0x05AC 0x0744 0x2 0x0
+#define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD                      0x0264 0x05AC 0x0678 0x3 0x0
+#define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE                        0x0264 0x05AC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA3__GPIO7_IO_5                           0x0264 0x05AC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA3__LCDIF2_RD_E                          0x0264 0x05AC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA3__TPSMP_HDATA_27                       0x0264 0x05AC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA3__GPU_DEBUG_3                          0x0264 0x05AC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA3__SDMA_DEBUG_EVENT_CHANNEL_3           0x0264 0x05AC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4                         0x0268 0x05B0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA4__CAN2_RX                              0x0268 0x05B0 0x0690 0x1 0x0
+#define MX6SX_PAD_SD3_DATA4__CANFD_RX2                            0x0268 0x05B0 0x0698 0x2 0x0
+#define MX6SX_PAD_SD3_DATA4__UART3_DCE_RX                         0x0268 0x05B0 0x0840 0x3 0x2
+#define MX6SX_PAD_SD3_DATA4__UART3_DTE_TX                         0x0268 0x05B0 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3                        0x0268 0x05B0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6                           0x0268 0x05B0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN                 0x0268 0x05B0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA4__TPSMP_HTRANS_1                       0x0268 0x05B0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA4__GPU_DEBUG_4                          0x0268 0x05B0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA4__SDMA_DEBUG_BUS_DEVICE_0              0x0268 0x05B0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5                         0x026C 0x05B4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA5__CAN1_TX                              0x026C 0x05B4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA5__CANFD_TX1                            0x026C 0x05B4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA5__UART3_DCE_TX                         0x026C 0x05B4 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA5__UART3_DTE_RX                         0x026C 0x05B4 0x0840 0x3 0x3
+#define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2                        0x026C 0x05B4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7                           0x026C 0x05B4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT                0x026C 0x05B4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA5__SIM_M_HWRITE                         0x026C 0x05B4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA5__GPU_DEBUG_5                          0x026C 0x05B4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA5__SDMA_DEBUG_BUS_DEVICE_1              0x026C 0x05B4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6                         0x0270 0x05B8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA6__CAN2_TX                              0x0270 0x05B8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA6__CANFD_TX2                            0x0270 0x05B8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS                        0x0270 0x05B8 0x083C 0x3 0x2
+#define MX6SX_PAD_SD3_DATA6__UART3_DTE_CTS                        0x0270 0x05B8 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4                        0x0270 0x05B8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8                           0x0270 0x05B8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT                0x0270 0x05B8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA6__TPSMP_HTRANS_0                       0x0270 0x05B8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA6__GPU_DEBUG_7                          0x0270 0x05B8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA6__SDMA_DEBUG_EVT_CHN_LINES_7           0x0270 0x05B8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7                         0x0274 0x05BC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA7__CAN1_RX                              0x0274 0x05BC 0x068C 0x1 0x0
+#define MX6SX_PAD_SD3_DATA7__CANFD_RX1                            0x0274 0x05BC 0x0694 0x2 0x0
+#define MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS                        0x0274 0x05BC 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA7__UART3_DTE_RTS                        0x0274 0x05BC 0x083C 0x3 0x3
+#define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5                        0x0274 0x05BC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9                           0x0274 0x05BC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                 0x0274 0x05BC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA7__TPSMP_HDATA_DIR                      0x0274 0x05BC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA7__GPU_DEBUG_6                          0x0274 0x05BC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA7__SDMA_DEBUG_EVT_CHN_LINES_2           0x0274 0x05BC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_CLK__USDHC4_CLK                             0x0278 0x05C0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_CLK__RAWNAND_DATA15                         0x0278 0x05C0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_CLK__ECSPI2_MISO                            0x0278 0x05C0 0x0724 0x2 0x1
+#define MX6SX_PAD_SD4_CLK__AUDMUX_AUD3_RXFS                       0x0278 0x05C0 0x0638 0x3 0x0
+#define MX6SX_PAD_SD4_CLK__LCDIF2_DATA_13                         0x0278 0x05C0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_CLK__GPIO6_IO_12                            0x0278 0x05C0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_CLK__ECSPI3_SS2                             0x0278 0x05C0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_CLK__TPSMP_HDATA_20                         0x0278 0x05C0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_CLK__VDEC_DEBUG_12                          0x0278 0x05C0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_CLK__SDMA_DEBUG_EVENT_CHANNEL_SEL           0x0278 0x05C0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_CMD__USDHC4_CMD                             0x027C 0x05C4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_CMD__RAWNAND_DATA14                         0x027C 0x05C4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_CMD__ECSPI2_MOSI                            0x027C 0x05C4 0x0728 0x2 0x1
+#define MX6SX_PAD_SD4_CMD__AUDMUX_AUD3_RXC                        0x027C 0x05C4 0x0634 0x3 0x0
+#define MX6SX_PAD_SD4_CMD__LCDIF2_DATA_14                         0x027C 0x05C4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_CMD__GPIO6_IO_13                            0x027C 0x05C4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_CMD__ECSPI3_SS1                             0x027C 0x05C4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_CMD__TPSMP_HDATA_19                         0x027C 0x05C4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_CMD__VDEC_DEBUG_11                          0x027C 0x05C4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_CMD__SDMA_DEBUG_CORE_RUN                    0x027C 0x05C4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA0__USDHC4_DATA0                         0x0280 0x05C8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA0__RAWNAND_DATA10                       0x0280 0x05C8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA0__ECSPI2_SS0                           0x0280 0x05C8 0x072C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA0__AUDMUX_AUD3_RXD                      0x0280 0x05C8 0x062C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA0__LCDIF2_DATA_12                       0x0280 0x05C8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA0__GPIO6_IO_14                          0x0280 0x05C8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA0__ECSPI3_SS3                           0x0280 0x05C8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA0__TPSMP_HDATA_21                       0x0280 0x05C8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA0__VDEC_DEBUG_13                        0x0280 0x05C8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA0__SDMA_DEBUG_MODE                      0x0280 0x05C8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA1__USDHC4_DATA1                         0x0284 0x05CC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA1__RAWNAND_DATA11                       0x0284 0x05CC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA1__ECSPI2_SCLK                          0x0284 0x05CC 0x0720 0x2 0x1
+#define MX6SX_PAD_SD4_DATA1__AUDMUX_AUD3_TXC                      0x0284 0x05CC 0x063C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA1__LCDIF2_DATA_11                       0x0284 0x05CC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA1__GPIO6_IO_15                          0x0284 0x05CC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA1__ECSPI3_RDY                           0x0284 0x05CC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA1__TPSMP_HDATA_22                       0x0284 0x05CC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA1__VDEC_DEBUG_14                        0x0284 0x05CC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA1__SDMA_DEBUG_BUS_ERROR                 0x0284 0x05CC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA2__USDHC4_DATA2                         0x0288 0x05D0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA2__RAWNAND_DATA12                       0x0288 0x05D0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA2__I2C2_SDA                             0x0288 0x05D0 0x07B4 0x2 0x0
+#define MX6SX_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS                     0x0288 0x05D0 0x0640 0x3 0x0
+#define MX6SX_PAD_SD4_DATA2__LCDIF2_DATA_10                       0x0288 0x05D0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA2__GPIO6_IO_16                          0x0288 0x05D0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA2__ECSPI2_SS3                           0x0288 0x05D0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA2__TPSMP_HDATA_23                       0x0288 0x05D0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA2__VDEC_DEBUG_15                        0x0288 0x05D0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA2__SDMA_DEBUG_BUS_RWB                   0x0288 0x05D0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA3__USDHC4_DATA3                         0x028C 0x05D4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA3__RAWNAND_DATA13                       0x028C 0x05D4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA3__I2C2_SCL                             0x028C 0x05D4 0x07B0 0x2 0x0
+#define MX6SX_PAD_SD4_DATA3__AUDMUX_AUD3_TXD                      0x028C 0x05D4 0x0630 0x3 0x0
+#define MX6SX_PAD_SD4_DATA3__LCDIF2_DATA_9                        0x028C 0x05D4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA3__GPIO6_IO_17                          0x028C 0x05D4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA3__ECSPI2_RDY                           0x028C 0x05D4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA3__TPSMP_HDATA_24                       0x028C 0x05D4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA3__VDEC_DEBUG_16                        0x028C 0x05D4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS             0x028C 0x05D4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4                         0x0290 0x05D8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09                       0x0290 0x05D8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_DCE_RX                         0x0290 0x05D8 0x0850 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_DTE_TX                         0x0290 0x05D8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK                          0x0290 0x05D8 0x0730 0x3 0x0
+#define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8                        0x0290 0x05D8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18                          0x0290 0x05D8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA4__SPDIF_OUT                            0x0290 0x05D8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA4__TPSMP_HDATA_16                       0x0290 0x05D8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA4__USB_OTG_HOST_MODE                    0x0290 0x05D8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE            0x0290 0x05D8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5                         0x0294 0x05DC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B                        0x0294 0x05DC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA5__UART5_DCE_TX                         0x0294 0x05DC 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA5__UART5_DTE_RX                         0x0294 0x05DC 0x0850 0x2 0x1
+#define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI                          0x0294 0x05DC 0x0738 0x3 0x0
+#define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7                        0x0294 0x05DC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19                          0x0294 0x05DC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA5__SPDIF_IN                             0x0294 0x05DC 0x0824 0x6 0x0
+#define MX6SX_PAD_SD4_DATA5__TPSMP_HDATA_17                       0x0294 0x05DC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA5__VDEC_DEBUG_9                         0x0294 0x05DC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0           0x0294 0x05DC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6                         0x0298 0x05E0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B                        0x0298 0x05E0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS                        0x0298 0x05E0 0x084C 0x2 0x0
+#define MX6SX_PAD_SD4_DATA6__UART5_DTE_CTS                        0x0298 0x05E0 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO                          0x0298 0x05E0 0x0734 0x3 0x0
+#define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6                        0x0298 0x05E0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20                          0x0298 0x05E0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA6__USDHC4_WP                            0x0298 0x05E0 0x0878 0x6 0x0
+#define MX6SX_PAD_SD4_DATA6__TPSMP_HDATA_18                       0x0298 0x05E0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA6__VDEC_DEBUG_10                        0x0298 0x05E0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1           0x0298 0x05E0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7                         0x029C 0x05E4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08                       0x029C 0x05E4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS                        0x029C 0x05E4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA7__UART5_DTE_RTS                        0x029C 0x05E4 0x084C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0                           0x029C 0x05E4 0x073C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15                       0x029C 0x05E4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21                          0x029C 0x05E4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA7__USDHC4_CD_B                          0x029C 0x05E4 0x0874 0x6 0x0
+#define MX6SX_PAD_SD4_DATA7__TPSMP_HDATA_15                       0x029C 0x05E4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA7__USB_OTG_PWR_WAKE                     0x029C 0x05E4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA7__SDMA_DEBUG_YIELD                     0x029C 0x05E4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B                     0x02A0 0x05E8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_RESET_B__RAWNAND_DQS                        0x02A0 0x05E8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET                       0x02A0 0x05E8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_RESET_B__AUDMUX_MCLK                        0x02A0 0x05E8 0x0000 0x3 0x0
+#define MX6SX_PAD_SD4_RESET_B__LCDIF2_RESET                       0x02A0 0x05E8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22                        0x02A0 0x05E8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_RESET_B__LCDIF2_CS                          0x02A0 0x05E8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_RESET_B__TPSMP_HDATA_25                     0x02A0 0x05E8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_RESET_B__VDEC_DEBUG_17                      0x02A0 0x05E8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_RESET_B__SDMA_DEBUG_BUS_DEVICE_2            0x02A0 0x05E8 0x0000 0x9 0x0
+#define MX6SX_PAD_USB_H_DATA__USB_H_DATA                          0x02A4 0x05EC 0x0000 0x0 0x0
+#define MX6SX_PAD_USB_H_DATA__PWM2_OUT                            0x02A4 0x05EC 0x0000 0x1 0x0
+#define MX6SX_PAD_USB_H_DATA__ANATOP_24M_OUT                      0x02A4 0x05EC 0x0000 0x2 0x0
+#define MX6SX_PAD_USB_H_DATA__I2C4_SDA                            0x02A4 0x05EC 0x07C4 0x3 0x1
+#define MX6SX_PAD_USB_H_DATA__WDOG3_WDOG_B                        0x02A4 0x05EC 0x0000 0x4 0x0
+#define MX6SX_PAD_USB_H_DATA__GPIO7_IO_10                         0x02A4 0x05EC 0x0000 0x5 0x0
+#define MX6SX_PAD_USB_H_STROBE__USB_H_STROBE                      0x02A8 0x05F0 0x0000 0x0 0x0
+#define MX6SX_PAD_USB_H_STROBE__PWM1_OUT                          0x02A8 0x05F0 0x0000 0x1 0x0
+#define MX6SX_PAD_USB_H_STROBE__ANATOP_32K_OUT                    0x02A8 0x05F0 0x0000 0x2 0x0
+#define MX6SX_PAD_USB_H_STROBE__I2C4_SCL                          0x02A8 0x05F0 0x07C0 0x3 0x1
+#define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB              0x02A8 0x05F0 0x0000 0x4 0x0
+#define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11                       0x02A8 0x05F0 0x0000 0x5 0x0
+
+/* these are not supposed to be used any more and remove them after some time */
+#define MX6SX_PAD_GPIO1_IO04__UART1_RX		MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX
+#define MX6SX_PAD_GPIO1_IO04__UART1_TX		MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX
+#define MX6SX_PAD_GPIO1_IO05__UART1_RX		MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX
+#define MX6SX_PAD_GPIO1_IO05__UART1_TX		MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX
+#define MX6SX_PAD_GPIO1_IO06__UART2_RX		MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX
+#define MX6SX_PAD_GPIO1_IO06__UART2_TX		MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX
+#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B	MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS
+#define MX6SX_PAD_GPIO1_IO07__UART2_RX		MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX
+#define MX6SX_PAD_GPIO1_IO07__UART2_TX		MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX
+#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B	MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS
+#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B	MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS
+#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B	MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS
+#define MX6SX_PAD_CSI_DATA04__UART6_RX		MX6SX_PAD_CSI_DATA04__UART6_DCE_RX
+#define MX6SX_PAD_CSI_DATA04__UART6_TX		MX6SX_PAD_CSI_DATA04__UART6_DTE_TX
+#define MX6SX_PAD_CSI_DATA05__UART6_RX		MX6SX_PAD_CSI_DATA05__UART6_DTE_RX
+#define MX6SX_PAD_CSI_DATA05__UART6_TX		MX6SX_PAD_CSI_DATA05__UART6_DCE_TX
+#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B	MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS
+#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B	MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS
+#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B	MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS
+#define MX6SX_PAD_CSI_MCLK__UART4_RX		MX6SX_PAD_CSI_MCLK__UART4_DCE_RX
+#define MX6SX_PAD_CSI_MCLK__UART4_TX		MX6SX_PAD_CSI_MCLK__UART4_DTE_TX
+#define MX6SX_PAD_CSI_PIXCLK__UART4_RX		MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX
+#define MX6SX_PAD_CSI_PIXCLK__UART4_TX		MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX
+#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B	MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS
+#define MX6SX_PAD_ENET2_COL__UART1_RX		MX6SX_PAD_ENET2_COL__UART1_DCE_RX
+#define MX6SX_PAD_ENET2_COL__UART1_TX		MX6SX_PAD_ENET2_COL__UART1_DTE_TX
+#define MX6SX_PAD_ENET2_CRS__UART1_RX		MX6SX_PAD_ENET2_CRS__UART1_DTE_RX
+#define MX6SX_PAD_ENET2_CRS__UART1_TX		MX6SX_PAD_ENET2_CRS__UART1_DCE_TX
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B	MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B	MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS
+#define MX6SX_PAD_KEY_COL0__UART6_RTS_B		MX6SX_PAD_KEY_COL0__UART6_DCE_RTS
+#define MX6SX_PAD_KEY_COL1__UART6_RX		MX6SX_PAD_KEY_COL1__UART6_DTE_RX
+#define MX6SX_PAD_KEY_COL1__UART6_TX		MX6SX_PAD_KEY_COL1__UART6_DCE_TX
+#define MX6SX_PAD_KEY_COL2__UART5_RTS_B		MX6SX_PAD_KEY_COL2__UART5_DCE_RTS
+#define MX6SX_PAD_KEY_COL3__UART5_RX		MX6SX_PAD_KEY_COL3__UART5_DTE_RX
+#define MX6SX_PAD_KEY_COL3__UART5_TX		MX6SX_PAD_KEY_COL3__UART5_DCE_TX
+#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B		MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS
+#define MX6SX_PAD_KEY_ROW1__UART6_RX		MX6SX_PAD_KEY_ROW1__UART6_DCE_RX
+#define MX6SX_PAD_KEY_ROW1__UART6_TX		MX6SX_PAD_KEY_ROW1__UART6_DTE_TX
+#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B		MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS
+#define MX6SX_PAD_KEY_ROW3__UART5_RX		MX6SX_PAD_KEY_ROW3__UART5_DCE_RX
+#define MX6SX_PAD_KEY_ROW3__UART5_TX		MX6SX_PAD_KEY_ROW3__UART5_DTE_TX
+#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B	MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS
+#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B	MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS
+#define MX6SX_PAD_NAND_DATA06__UART3_RX		MX6SX_PAD_NAND_DATA06__UART3_DCE_RX
+#define MX6SX_PAD_NAND_DATA06__UART3_TX		MX6SX_PAD_NAND_DATA06__UART3_DTE_TX
+#define MX6SX_PAD_NAND_DATA07__UART3_RX		MX6SX_PAD_NAND_DATA07__UART3_DTE_RX
+#define MX6SX_PAD_NAND_DATA07__UART3_TX		MX6SX_PAD_NAND_DATA07__UART3_DCE_TX
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B	MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B	MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX		MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX		MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX	MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX	MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX
+#define MX6SX_PAD_SD1_DATA0__UART2_RX		MX6SX_PAD_SD1_DATA0__UART2_DCE_RX
+#define MX6SX_PAD_SD1_DATA0__UART2_TX		MX6SX_PAD_SD1_DATA0__UART2_DTE_TX
+#define MX6SX_PAD_SD1_DATA1__UART2_RX		MX6SX_PAD_SD1_DATA1__UART2_DTE_RX
+#define MX6SX_PAD_SD1_DATA1__UART2_TX		MX6SX_PAD_SD1_DATA1__UART2_DCE_TX
+#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B	MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS
+#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B	MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS
+#define MX6SX_PAD_SD2_DATA0__UART4_RX		MX6SX_PAD_SD2_DATA0__UART4_DCE_RX
+#define MX6SX_PAD_SD2_DATA0__UART4_TX		MX6SX_PAD_SD2_DATA0__UART4_DTE_TX
+#define MX6SX_PAD_SD2_DATA1__UART4_RX		MX6SX_PAD_SD2_DATA1__UART4_DTE_RX
+#define MX6SX_PAD_SD2_DATA1__UART4_TX		MX6SX_PAD_SD2_DATA1__UART4_DCE_TX
+#define MX6SX_PAD_SD2_DATA2__UART6_RX		MX6SX_PAD_SD2_DATA2__UART6_DCE_RX
+#define MX6SX_PAD_SD2_DATA2__UART6_TX		MX6SX_PAD_SD2_DATA2__UART6_DTE_TX
+#define MX6SX_PAD_SD2_DATA3__UART6_RX		MX6SX_PAD_SD2_DATA3__UART6_DTE_RX
+#define MX6SX_PAD_SD2_DATA3__UART6_TX		MX6SX_PAD_SD2_DATA3__UART6_DCE_TX
+#define MX6SX_PAD_SD3_CLK__UART4_CTS_B		MX6SX_PAD_SD3_CLK__UART4_DCE_CTS
+#define MX6SX_PAD_SD3_CMD__UART4_RX		MX6SX_PAD_SD3_CMD__UART4_DTE_RX
+#define MX6SX_PAD_SD3_CMD__UART4_TX		MX6SX_PAD_SD3_CMD__UART4_DCE_TX
+#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B	MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS
+#define MX6SX_PAD_SD3_DATA3__UART4_RX		MX6SX_PAD_SD3_DATA3__UART4_DCE_RX
+#define MX6SX_PAD_SD3_DATA3__UART4_TX		MX6SX_PAD_SD3_DATA3__UART4_DTE_TX
+#define MX6SX_PAD_SD3_DATA4__UART3_RX		MX6SX_PAD_SD3_DATA4__UART3_DCE_RX
+#define MX6SX_PAD_SD3_DATA4__UART3_TX		MX6SX_PAD_SD3_DATA4__UART3_DTE_TX
+#define MX6SX_PAD_SD3_DATA5__UART3_RX		MX6SX_PAD_SD3_DATA5__UART3_DTE_RX
+#define MX6SX_PAD_SD3_DATA5__UART3_TX		MX6SX_PAD_SD3_DATA5__UART3_DCE_TX
+#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B	MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS
+#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B	MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS
+#define MX6SX_PAD_SD4_DATA4__UART5_RX		MX6SX_PAD_SD4_DATA4__UART5_DCE_RX
+#define MX6SX_PAD_SD4_DATA4__UART5_TX		MX6SX_PAD_SD4_DATA4__UART5_DTE_TX
+#define MX6SX_PAD_SD4_DATA5__UART5_RX		MX6SX_PAD_SD4_DATA5__UART5_DTE_RX
+#define MX6SX_PAD_SD4_DATA5__UART5_TX		MX6SX_PAD_SD4_DATA5__UART5_DCE_TX
+#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B	MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS
+#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B	MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS
+
+#endif /* __DTS_IMX6SX_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts
new file mode 100644
index 0000000000000..b0c27b9b02446
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts
@@ -0,0 +1,557 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX Sabre Auto Board";
+	compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user {
+			label = "debug";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_sd3: regulator-vcc-sd3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_sd3>;
+		regulator-name = "VCC_SD3";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_wake: regulator-can-wake {
+		compatible = "regulator-fixed";
+		regulator-name = "can-wake";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_wake>;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_en>;
+	};
+
+	reg_cs42888: cs42888_supply {
+		compatible = "regulator-fixed";
+		regulator-name = "cs42888_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			     "fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&cs42888>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+	};
+};
+
+&anaclk2 {
+	clock-frequency = <24576000>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6SX_PLL4_BYPASS_SRC>,
+			  <&clks IMX6SX_PLL4_BYPASS>,
+			  <&clks IMX6SX_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6SX_CLK_LVDS2_IN>,
+				 <&clks IMX6SX_PLL4_BYPASS_SRC>;
+	assigned-clock-rates = <0>, <0>, <24576000>;
+};
+
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6SX_CLK_ESAI_SEL>,
+			<&clks IMX6SX_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6SX_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&vcc_sd3>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_egalax_int: egalax-intgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22      0x10b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO        0xa0b1
+			MX6SX_PAD_ENET1_MDC__ENET1_MDC          0xa0b1
+			MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC   0xa0b9
+			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0   0xa0b1
+			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1   0xa0b1
+			MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2   0xa0b1
+			MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3   0xa0b1
+			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN    0xa0b1
+			MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK      0x3081
+			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0   0x3081
+			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1   0x3081
+			MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2   0x3081
+			MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3   0x3081
+			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN    0x3081
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC   0xa0b9
+			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0   0xa0b1
+			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1   0xa0b1
+			MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2   0xa0b1
+			MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3   0xa0b1
+			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN    0xa0b1
+			MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK      0x3081
+			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0   0x3081
+			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1   0x3081
+			MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2   0x3081
+			MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3   0x3081
+			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN    0x3081
+		>;
+	};
+
+	pinctrl_esai: esaigrp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK   0x1b030
+			MX6SX_PAD_CSI_DATA01__ESAI_TX_FS    0x1b030
+			MX6SX_PAD_CSI_HSYNC__ESAI_TX0       0x1b030
+			MX6SX_PAD_CSI_DATA04__ESAI_TX1      0x1b030
+			MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3  0x1b030
+			MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2  0x1b030
+			MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK   0x1b030
+			MX6SX_PAD_CSI_DATA03__ESAI_RX_FS    0x1b030
+			MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0   0x1b030
+			MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1  0x1b030
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DQS__CAN1_TX   0x1b020
+			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020
+			MX6SX_PAD_QSPI1A_DQS__CAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO03__I2C2_SDA          0x4001b8b1
+			MX6SX_PAD_GPIO1_IO02__I2C2_SCL          0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_ROW4__I2C3_SDA            0x4001b8b1
+			MX6SX_PAD_KEY_COL4__I2C3_SCL            0x4001b8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6SX_PAD_ENET2_COL__SPDIF_IN           0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
+			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
+			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
+			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
+			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
+			MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
+			MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
+			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
+			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
+			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
+			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
+			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
+			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
+			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
+			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+			MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
+			MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
+		>;
+	};
+
+	pinctrl_vcc_sd3: vccsd3grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY	0x30b0
+		>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	cs42888: cs42888@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&anaclk2 0>;
+		clock-names = "mclk";
+		VA-supply = <&reg_cs42888>;
+		VD-supply = <&reg_cs42888>;
+		VLS-supply = <&reg_cs42888>;
+		VLC-supply = <&reg_cs42888>;
+	};
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_egalax_int>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>;
+	};
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	max7322: gpio@68 {
+		compatible = "maxim,max7322";
+		reg = <0x68>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	max7310_a: gpio@30 {
+		compatible = "maxim,max7310";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	max7310_b: gpio@32 {
+		compatible = "maxim,max7310";
+		reg = <0x32>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-mqs.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-mqs.dts
new file mode 100644
index 0000000000000..a4ab2d3e960c4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-mqs.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+#include "imx6sx-sdb.dts"
+/ {
+
+	sound {
+		status = "disabled";
+	};
+
+	sound-mqs {
+		compatible = "fsl,imx6sx-sdb-mqs",
+			     "fsl,imx-audio-mqs";
+		model = "mqs-audio";
+		audio-cpu = <&sai1>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&mqs>;
+	};
+};
+
+&usdhc2 {
+	/* pin conflict with mqs*/
+	status = "disabled";
+};
+
+&mqs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mqs>;
+	clocks = <&clks IMX6SX_CLK_SAI1>;
+	clock-names = "mclk";
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-0 = <>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "disabled";
+};
+
+&sdma {
+	gpr = <&gpr>;
+	/* SDMA event remap for SAI1 */
+	fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-reva.dts
new file mode 100644
index 0000000000000..48f19dede467f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-reva.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+#include "imx6sx-sdb.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB RevA Board";
+	compatible = "fsl,imx6sx-sdb-reva", "fsl,imx6sx";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&qspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi2>;
+	status = "okay";
+
+	flash0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl128s", "jedec,spi-nor";
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+
+	flash1: flash@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl128s", "jedec,spi-nor";
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
+&reg_can_en {
+	/* Transceiver EN/STBY is active high on RevA board */
+	gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+	enable-active-high;
+};
+
+&reg_can_stby {
+	gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	enable-active-high;
+	vin-supply = <&reg_can_en>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&vgen6_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen6_reg>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-sai.dts
new file mode 100644
index 0000000000000..1c4eacd68e1bd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-sai.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2016 Freescale Semiconductor, Inc.
+
+#include "imx6sx-sdb.dts"
+
+/ {
+	sound {
+		audio-cpu = <&sai1>;
+	};
+};
+
+&audmux {
+	/* pin conflict with sai */
+	status = "disabled";
+};
+
+&sai1 {
+	status = "okay";
+};
+
+&sdma {
+	gpr = <&gpr>;
+	/* SDMA event remap for SAI1 */
+	fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
+};
+
+&ssi2 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dts
new file mode 100644
index 0000000000000..e05a1be5553c8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+#include "imx6sx-sdb.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB RevB Board";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze200";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&qspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi2>;
+	status = "okay";
+
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	flash1: flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <2>;
+	};
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&vgen6_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen6_reg>;
+};
+
+&reg_can_stby {
+	/* Transceiver EN/STBY is active low on RevB board */
+	gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
new file mode 100644
index 0000000000000..c6e85e4a0883e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
@@ -0,0 +1,718 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB Board";
+	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	vcc_sd3: regulator-vcc-sd3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_sd3>;
+		regulator-name = "VCC_SD3";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_psu_5v: regulator-psu-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "PSU-5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio3 27 0>;
+		enable-active-high;
+	};
+
+	reg_peri_3v3: regulator-peri-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_peri_3v3>;
+		regulator-name = "peri_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_enet_3v3: regulator-enet-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enet_3v3>;
+		regulator-name = "enet_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_pcie_gpio: regulator-pcie-gpio {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <6>;
+		hp-det-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif",
+			   "fsl,imx6sx-sdb-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-supply = <&reg_enet_3v3>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SX_CLK_AUDIO>;
+		DCVDD-supply = <&vgen4_reg>;
+		DBVDD-supply = <&vgen4_reg>;
+		AVDD-supply = <&vgen4_reg>;
+		CPVDD-supply = <&vgen4_reg>;
+		MICVDD-supply = <&vgen3_reg>;
+		PLLVDD-supply = <&vgen4_reg>;
+		SPKVDD1-supply = <&reg_psu_5v>;
+		SPKVDD2-supply = <&reg_psu_5v>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_gpio>;
+	status = "okay";
+};
+
+&lcdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "disabled";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart5 { /* for bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&vcc_sd3>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	imx6x-sdb {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
+				MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
+				MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
+				MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
+				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
+				MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1
+				MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0xa0b1
+				MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1
+				MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1
+				MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0xa0b1
+				MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0xa0b1
+				MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1
+				MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
+				MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
+				MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
+				MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
+				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
+				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
+				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
+				/* phy reset */
+				MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0x10b0
+			>;
+		};
+
+		pinctrl_enet_3v3: enet3v3grp {
+			fsl,pins = <
+				MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0xa0b9
+				MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0xa0b1
+				MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0xa0b1
+				MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0xa0b1
+				MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0xa0b1
+				MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0xa0b1
+				MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
+				MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
+				MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
+				MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
+				MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
+				MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b020
+				MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b020
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b020
+				MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b020
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
+				MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
+			>;
+		};
+
+		pinctrl_hp: hpgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
+				MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
+				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+				MX6SX_PAD_LCD1_CLK__LCDIF1_CLK	0x4001b0b0
+				MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+				MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+				MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+				MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+			>;
+		};
+
+		pinctrl_mqs: mqsgrp {
+			fsl,pins = <
+				MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0
+				MX6SX_PAD_SD2_CMD__MQS_LEFT  0x120b0
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
+			>;
+		};
+
+		pinctrl_pcie_reg: pciereggrp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0x10b0
+			>;
+		};
+
+		pinctrl_peri_3v3: peri3v3grp {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp-1 {
+			fsl,pins = <
+				MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
+			>;
+		};
+
+		pinctrl_qspi2: qspi2grp {
+			fsl,pins = <
+				MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0     0x70f1
+				MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1  0x70f1
+				MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2    0x70f1
+				MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3    0x70f1
+				MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK        0x70f1
+				MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B       0x70f1
+				MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0   0x70f1
+				MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1   0x70f1
+				MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2     0x70f1
+				MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3     0x70f1
+				MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK     0x70f1
+				MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B    0x70f1
+			>;
+		};
+
+		pinctrl_vcc_sd3: vccsd3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
+			>;
+		};
+
+		pinctrl_sai1: sai1grp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK	0x130b0
+				MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC	0x130b0
+				MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0	0x120b0
+				MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0	0x130b0
+				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_DATA4__SPDIF_OUT          0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
+				MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_ROW3__UART5_DCE_RX	0x1b0b1
+				MX6SX_PAD_KEY_COL3__UART5_DCE_TX	0x1b0b1
+				MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS	0x1b0b1
+				MX6SX_PAD_KEY_COL2__UART5_DCE_RTS	0x1b0b1
+			>;
+		};
+
+		pinctrl_usb_otg1: usbotg1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
+			>;
+		};
+
+		pinctrl_usb_otg1_id: usbotg1idgrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
+			>;
+		};
+
+		pinctrl_usb_otg2: usbot2ggrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+				MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+				MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+				MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+				MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+				MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
+				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
+				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
+				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts
new file mode 100644
index 0000000000000..bfcd8f7d86dde
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Christoph Fritz <chf.fritz@googlemail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Softing VIN|ING 2000";
+	compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb_otg1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_peri_3v3: regulator-peri_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "peri_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "red";
+			max-brightness = <255>;
+			pwms = <&pwm6 0 50000>;
+		};
+
+		led-2 {
+			label = "green";
+			max-brightness = <255>;
+			pwms = <&pwm2 0 50000>;
+		};
+
+		led-3 {
+			label = "blue";
+			max-brightness = <255>;
+			pwms = <&pwm1 0 50000>;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_peri_3v3>;
+	status = "okay";
+};
+
+&cpu0 {
+	/*
+	 * This board has a shared rail of reg_arm and reg_soc (supplied by
+	 * sw1a_reg) which is modeled below, but still this module behaves
+	 * unstable without higher voltages. Hence, set higher voltages here.
+	 */
+	operating-points = <
+		/* kHz    uV */
+		996000  1250000
+		792000  1175000
+		396000  1175000
+		198000  1175000
+		>;
+	fsl,soc-operating-points = <
+		/* ARM kHz  SOC uV */
+		996000	1250000
+		792000	1175000
+		396000	1175000
+		198000  1175000
+	>;
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-supply = <&reg_peri_3v3>;
+	phy-reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <5>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet0-phy@0 {
+			reg = <0>;
+			max-speed = <100>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-supply = <&reg_peri_3v3>;
+	phy-reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <5>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet1-phy@0 {
+			reg = <0>;
+			max-speed = <100>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	proximity: sx9500@28 {
+		compatible = "semtech,sx9500";
+		reg = <0x28>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sx9500>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze200";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpios>;
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CLK__ECSPI4_SCLK		0x130b1
+			MX6SX_PAD_SD3_DATA3__ECSPI4_MISO	0x130b1
+			MX6SX_PAD_SD3_CMD__ECSPI4_MOSI		0x130b1
+			MX6SX_PAD_SD3_DATA2__GPIO7_IO_4		0x30b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x30c1
+			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x30c1
+			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0f9
+			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0f9
+			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x30c1
+			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0f9
+			MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4000a038
+			/* LAN8720 PHY Reset */
+			MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9	0x10b0
+			/* MDIO */
+			MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0f9
+			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0f9
+			/* IRQ from PHY */
+			MX6SX_PAD_KEY_ROW2__GPIO2_IO_17		0x10b0
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0x1b0b0
+			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0x1b0b0
+			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x1b0b0
+			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x1b0b0
+			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x1b0b0
+			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0x1b0b0
+			MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4000a038
+			/* LAN8720 PHY Reset */
+			MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21	0x10b0
+			/* MDIO */
+			MX6SX_PAD_ENET1_COL__ENET2_MDC		0xa0f9
+			MX6SX_PAD_ENET1_CRS__ENET2_MDIO		0xa0f9
+			/* IRQ from PHY */
+			MX6SX_PAD_KEY_ROW4__GPIO2_IO_19		0x10b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b0b0
+			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b0b0
+			MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpios: gpiosgrp {
+		fsl,pins = <
+			/* reset external uC */
+			MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19	0x10b0
+			/* IRQ from external uC */
+			MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x10b0
+			/* overcurrent detection */
+			MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8	0x10b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+			MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_ALE__I2C3_SDA		0x4001b8b1
+			MX6SX_PAD_NAND_CLE__I2C3_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_DATA02__GPIO4_IO_6	0x10b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp-1 {
+		fsl,pins = <
+			/* blue LED */
+			MX6SX_PAD_RGMII2_RD3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp-1 {
+		fsl,pins = <
+			/* green LED */
+			MX6SX_PAD_RGMII2_RD2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp-1 {
+		fsl,pins = <
+			/* red LED */
+			MX6SX_PAD_RGMII2_TD2__PWM6_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_sx9500: sx9500grp {
+		fsl,pins = <
+			/* Reset */
+			MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x838
+			/* IRQ */
+			MX6SX_PAD_KEY_ROW1__GPIO2_IO_16		0x70e0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX	0x1b0b1
+			MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_50mhz: usdhc2grp-50mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+			MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28	0x1b000
+			MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26	0x10b0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x100b9
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x170b9
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x170b9
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x170b9
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x170b9
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x100f9
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x170f9
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x170f9
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x170f9
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x170f9
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc4_50mhz: usdhc4grp-50mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x17059
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x17059
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x17059
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x17059
+			MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B	0x17068
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4-100mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100b9
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170b9
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170b9
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170b9
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170b9
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170b9
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170b9
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170b9
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170b9
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4-200mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100f9
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170f9
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170f9
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170f9
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170f9
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170f9
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170f9
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170f9
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170f9
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170f9
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm6 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+	status = "okay";
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1a_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_50mhz>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc4 {
+	/* hs200-mode is currently unsupported because Vccq is on 3.1V, but
+	 * not on necessary 1.8V.
+	 */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-basic.dts
new file mode 100644
index 0000000000000..205ea26484e35
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-basic.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Basic";
+	compatible = "udoo,neobasic", "fsl,imx6sx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&fec1 {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-extended.dts
new file mode 100644
index 0000000000000..5817b49853910
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-extended.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Extended";
+	compatible = "udoo,neoextended", "fsl,imx6sx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&i2c4 { /* Onboard Motion sensors */
+	status = "okay";
+};
+
+&uart3 { /* Bluetooth */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-full.dts
new file mode 100644
index 0000000000000..96f4d89848a3c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-full.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Full";
+	compatible = "udoo,neofull", "fsl,imx6sx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&fec1 {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&i2c4 { /* Onboard Motion sensors */
+	status = "okay";
+};
+
+&uart3 { /* Bluetooth */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi
new file mode 100644
index 0000000000000..725d0b5cb55f6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi
@@ -0,0 +1,482 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+#include "imx6sx.dtsi"
+
+/ {
+	compatible = "fsl,imx6sx";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red {
+			label = "udoo-neo:red:mmc";
+			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		led-orange {
+			label = "udoo-neo:orange:user";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	reg_sdio_pwr: regulator-sdio-pwr {
+		compatible = "regulator-fixed";
+		gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "SDIO_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg1_reg>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg2_reg>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 { /* Brick snap in sensors connector */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	hdmi-transmitter@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		interrupts-extended = <&gpio3 27 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			port {
+				hdmi: endpoint {
+					remote-endpoint = <&lcdc>;
+				};
+			};
+		};
+	};
+};
+
+&i2c4 { /* Onboard Motion sensors */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <100000>;
+	status = "disabled";
+};
+
+&lcdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		lcdc: endpoint {
+			remote-endpoint = <&hdmi>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_bt_reg: btreggrp {
+		fsl,pins =
+			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17	0x15059>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins =
+			<MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0xa0b1>,
+			<MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1>,
+			<MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1>,
+
+			<MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x3081>,
+			<MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0x3081>,
+			<MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081>,
+			<MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081>,
+			<MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081>,
+			<MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER	0x3081>,
+
+			<MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1>,
+			<MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO03__I2C2_SDA		0x4001b8b1>,
+			<MX6SX_PAD_GPIO1_IO02__I2C2_SCL		0x4001b8b1>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX6SX_PAD_KEY_ROW4__I2C3_SDA			0x4001b8b1>,
+			<MX6SX_PAD_KEY_COL4__I2C3_SCL			0x4001b8b1>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins =
+			<MX6SX_PAD_USB_H_DATA__I2C4_SDA		0x4001b8b1>,
+			<MX6SX_PAD_USB_H_STROBE__I2C4_SCL	0x4001b8b1>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23		0x4001b0b0
+			MX6SX_PAD_LCD1_CLK__LCDIF1_CLK		0x4001b0b0
+			MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE		0x4001b0b0
+			MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC		0x4001b0b0
+			MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC		0x4001b0b0
+			MX6SX_PAD_LCD1_RESET__GPIO3_IO_27		0x4001b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX	0x1b0b1>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX6SX_PAD_SD3_DATA4__UART3_DCE_RX	0x13059>,
+			<MX6SX_PAD_SD3_DATA5__UART3_DCE_TX	0x13059>,
+			<MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS	0x13059>,
+			<MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS	0x13059>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins =
+			<MX6SX_PAD_SD4_DATA4__UART5_DCE_RX	0x1b0b1>,
+			<MX6SX_PAD_SD4_DATA5__UART5_DCE_TX	0x1b0b1>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins =
+			<MX6SX_PAD_CSI_DATA00__UART6_RI_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA01__UART6_DSR_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA02__UART6_DTR_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA03__UART6_DCD_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA04__UART6_DCE_RX	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA05__UART6_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS	0x1b0b1>;
+	};
+
+	pinctrl_otg1_reg: otg1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0>;
+	};
+
+	pinctrl_otg2_reg: otg2grp {
+		fsl,pins =
+			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12	0x10b0>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059>,
+			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC	0x10b0>;
+	};
+
+	pinctrl_usb_otg2: usbot2ggrp {
+		fsl,pins =
+			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC	0x10b0>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059>,
+			<MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059>,
+			<MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059>,
+			<MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059>,
+			<MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059>,
+			<MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059>,
+			<MX6SX_PAD_SD1_DATA0__GPIO6_IO_2	0x17059>; /* CD */
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX6SX_PAD_KEY_COL2__GPIO2_IO_12	0x15059>,
+			<MX6SX_PAD_KEY_ROW1__GPIO2_IO_16	0x13059>,
+			<MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17069>,
+			<MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17069>,
+			<MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17069>,
+			<MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17069>,
+			<MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17069>,
+			<MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10069>,
+			<MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT	0x10059>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Cortex-M4 serial */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&uart3 { /* Bluetooth - only on Extended/Full versions */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "disabled";
+
+	bluetooth {
+		compatible = "ti,wl1831-st";
+		enable-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_reg>;
+		max-speed = <921600>;
+	};
+};
+
+/* Arduino serial */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "disabled";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbotg1 { /* J2 micro USB port */
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	status = "okay";
+};
+
+&usbotg2 { /* J3 host USB port */
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg2>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_sdio_pwr>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 { /* Wi-Fi */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	vmmc-supply = <&reg_wlan>;
+	cap-power-off-card;
+	wakeup-source;
+	keep-power-in-suspend;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1831";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
new file mode 100644
index 0000000000000..a05069d49cb88
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
@@ -0,0 +1,1471 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2014 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/clock/imx6sx-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sx-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		can0 = &flexcan1;
+		can1 = &flexcan2;
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		mmc3 = &usdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		spi4 = &ecspi5;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usb2 = &usbh;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1075000
+				198000	975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC uV */
+				996000      1175000
+				792000      1175000
+				396000      1175000
+				198000	    1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6SX_CLK_ARM>,
+				 <&clks IMX6SX_CLK_PLL2_PFD2>,
+				 <&clks IMX6SX_CLK_STEP>,
+				 <&clks IMX6SX_CLK_PLL1_SW>,
+				 <&clks IMX6SX_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	ckil: clock-ckil {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-ipp-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-ipp-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	anaclk1: clock-anaclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "anaclk1";
+	};
+
+	anaclk2: clock-anaclk2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "anaclk2";
+	};
+
+	mqs: mqs {
+		compatible = "fsl,imx6sx-mqs";
+		gpr = <&gpr>;
+		status = "disabled";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram_s: sram@8f8000 {
+			compatible = "mmio-sram";
+			reg = <0x008f8000 0x4000>;
+			ranges = <0 0x008f8000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
+		};
+
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6SX_CLK_OCRAM>;
+		};
+
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
+		L2: cache-controller@a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		gpu: gpu@1800000 {
+			compatible = "vivante,gc";
+			reg = <0x01800000 0x4000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SX_CLK_GPU>,
+				 <&clks IMX6SX_CLK_GPU>,
+				 <&clks IMX6SX_CLK_GPU>;
+			clock-names = "bus", "core", "shader";
+			power-domains = <&pd_pu>;
+		};
+
+		dma_apbh: dma-controller@1804000 {
+			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x01804000 0x2000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6SX_CLK_APBH_DMA>;
+		};
+
+		gpmi: nand-controller@1806000{
+			compatible = "fsl,imx6sx-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6SX_CLK_GPMI_IO>,
+				 <&clks IMX6SX_CLK_GPMI_APB>,
+				 <&clks IMX6SX_CLK_GPMI_BCH>,
+				 <&clks IMX6SX_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6SX_CLK_PER1_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		aips1: bus@2000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@2004000 {
+					compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>,
+					       <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>,
+						 <&clks IMX6SX_CLK_OSC>,
+						 <&clks IMX6SX_CLK_SPDIF>,
+						 <&clks 0>, <&clks 0>, <&clks 0>,
+						 <&clks IMX6SX_CLK_IPG>,
+						 <&clks 0>, <&clks 0>,
+						 <&clks IMX6SX_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "spba";
+					status = "disabled";
+				};
+
+				ecspi1: spi@2008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI1>,
+						 <&clks IMX6SX_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI2>,
+						 <&clks IMX6SX_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI3>,
+						 <&clks IMX6SX_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI4>,
+						 <&clks IMX6SX_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6sx-uart",
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_UART_IPG>,
+						 <&clks IMX6SX_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				esai: esai@2024000 {
+					compatible = "fsl,imx6sx-esai", "fsl,imx35-esai";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
+						 <&clks IMX6SX_CLK_ESAI_MEM>,
+						 <&clks IMX6SX_CLK_ESAI_EXTAL>,
+						 <&clks IMX6SX_CLK_ESAI_IPG>,
+						 <&clks IMX6SX_CLK_SPBA>;
+					clock-names = "core", "mem", "extal",
+						      "fsys", "spba";
+					dmas = <&sdma 23 21 0>,
+					       <&sdma 24 21 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ssi1: ssi@2028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
+						 <&clks IMX6SX_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi2: ssi@202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
+						 <&clks IMX6SX_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi3: ssi@2030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
+						 <&clks IMX6SX_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				asrc: asrc@2034000 {
+					compatible = "fsl,imx6sx-asrc", "fsl,imx53-asrc";
+					reg = <0x02034000 0x4000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ASRC_IPG>,
+						<&clks IMX6SX_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>,
+						<&clks IMX6SX_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "spba";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>,
+					       <&sdma 19 23 1>, <&sdma 20 23 1>,
+					       <&sdma 21 23 1>, <&sdma 22 23 1>;
+					dma-names = "rxa", "rxb", "rxc",
+						    "txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
+					status = "okay";
+				};
+			};
+
+			pwm1: pwm@2080000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM1>,
+					 <&clks IMX6SX_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm2: pwm@2084000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM2>,
+					 <&clks IMX6SX_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm3: pwm@2088000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM3>,
+					 <&clks IMX6SX_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm4: pwm@208c000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM4>,
+					 <&clks IMX6SX_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			flexcan1: can@2090000 {
+				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
+					 <&clks IMX6SX_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 1>;
+				status = "disabled";
+			};
+
+			flexcan2: can@2094000 {
+				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
+					 <&clks IMX6SX_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 2>;
+				status = "disabled";
+			};
+
+			gpt: timer@2098000 {
+				compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_GPT_BUS>,
+					 <&clks IMX6SX_CLK_GPT_3M>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 5 26>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 31 20>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 51 29>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 80 32>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 112 24>;
+			};
+
+			gpio6: gpio@20b0000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>;
+			};
+
+			gpio7: gpio@20b4000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
+			};
+
+			kpp: keypad@20b8000 {
+				compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@20bc000 {
+				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+			};
+
+			wdog2: watchdog@20c0000 {
+				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				status = "disabled";
+			};
+
+			clks: clock-controller@20c4000 {
+				compatible = "fsl,imx6sx-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
+					     "syscon", "simple-mfd";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_vdd1p1: regulator-1p1 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd3p0: regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd2p5: regulator-2p5 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2250000>;
+					regulator-max-microvolt = <2750000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2100000>;
+					anatop-max-voltage = <2875000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_pcie: regulator-vddpcie {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpcie";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+				};
+			};
+
+			usbphy1: usbphy@20c9000 {
+				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@20ca000 {
+				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBPHY2>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			epit1: epit@20d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@20d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: reset-controller@20d8000 {
+				compatible = "fsl,imx6sx-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@20dc000 {
+				compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_pu: power-domain@1 {
+						reg = <1>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_soc>;
+						clocks = <&clks IMX6SX_CLK_GPU>;
+					};
+
+					pd_disp: power-domain@2 {
+						reg = <2>;
+						#power-domain-cells = <0>;
+						clocks = <&clks IMX6SX_CLK_PXP_AXI>,
+							 <&clks IMX6SX_CLK_DISPLAY_AXI>,
+							 <&clks IMX6SX_CLK_LCDIF1_PIX>,
+							 <&clks IMX6SX_CLK_LCDIF_APB>,
+							 <&clks IMX6SX_CLK_LCDIF2_PIX>,
+							 <&clks IMX6SX_CLK_CSI>,
+							 <&clks IMX6SX_CLK_VADC>;
+					};
+
+					pd_pci: power-domain@3 {
+						reg = <3>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_pcie>;
+					};
+				};
+			};
+
+			iomuxc: pinctrl@20e0000 {
+				compatible = "fsl,imx6sx-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: syscon@20e4000 {
+				compatible = "fsl,imx6sx-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x020e4000 0x4000>;
+
+				lvds_bridge: bridge@18 {
+					compatible = "fsl,imx6sx-ldb";
+					reg = <0x18 0x4>;
+					clocks = <&clks IMX6SX_CLK_LDB_DI0>;
+					clock-names = "ldb";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							ldb_from_lcdif1: endpoint {
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ldb_lvds_ch0: endpoint {
+							};
+						};
+					};
+				};
+			};
+
+			sdma: dma-controller@20ec000 {
+				compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>,
+					 <&clks IMX6SX_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				/* imx6sx reuses imx6q sdma firmware */
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+		};
+
+		aips2: bus@2100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			crypto: crypto@2100000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x2100000 0x10000>;
+				ranges = <0 0x2100000 0x10000>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6SX_CLK_CAAM_MEM>,
+					 <&clks IMX6SX_CLK_CAAM_ACLK>,
+					 <&clks IMX6SX_CLK_CAAM_IPG>,
+					 <&clks IMX6SX_CLK_EIM_SLOW>;
+				clock-names = "mem", "aclk", "ipg", "emi_slow";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			usbotg1: usb@2184000 {
+				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@2184200 {
+				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh: usb@2184400 {
+				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+				fsl,usbphy = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc 2>;
+				phy_type = "hsic";
+				fsl,anatop = <&anatop>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+			};
+
+			fec1: ethernet@2188000 {
+				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_ENET>,
+					 <&clks IMX6SX_CLK_ENET_AHB>,
+					 <&clks IMX6SX_CLK_ENET_PTP>,
+					 <&clks IMX6SX_CLK_ENET_REF>,
+					 <&clks IMX6SX_CLK_ENET_PTP>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				fsl,stop-mode = <&gpr 0x10 3>;
+				status = "disabled";
+			};
+
+			mlb: mlb@218c000 {
+				reg = <0x0218c000 0x4000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_MLB>;
+				status = "disabled";
+			};
+
+			usdhc1: mmc@2190000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC1>,
+					 <&clks IMX6SX_CLK_USDHC1>,
+					 <&clks IMX6SX_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@2194000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC2>,
+					 <&clks IMX6SX_CLK_USDHC2>,
+					 <&clks IMX6SX_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@2198000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC3>,
+					 <&clks IMX6SX_CLK_USDHC3>,
+					 <&clks IMX6SX_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				status = "disabled";
+			};
+
+			usdhc4: mmc@219c000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC4>,
+					 <&clks IMX6SX_CLK_USDHC4>,
+					 <&clks IMX6SX_CLK_USDHC4>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			memory-controller@21b0000 {
+				compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>;
+			};
+
+			fec2: ethernet@21b4000 {
+				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
+				reg = <0x021b4000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_ENET>,
+					 <&clks IMX6SX_CLK_ENET_AHB>,
+					 <&clks IMX6SX_CLK_ENET_PTP>,
+					 <&clks IMX6SX_CLK_ENET2_REF_125M>,
+					 <&clks IMX6SX_CLK_ENET_PTP>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,stop-mode = <&gpr 0x10 4>;
+				status = "disabled";
+			};
+
+			weim: weim@21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
+				reg = <0x021b8000 0x4000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
+			ocotp: efuse@21bc000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6sx-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SX_CLK_OCOTP>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+			};
+
+			sai1: sai@21d4000 {
+				compatible = "fsl,imx6sx-sai";
+				reg = <0x021d4000 0x4000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
+					 <&clks IMX6SX_CLK_SAI1>,
+					 <&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 31 24 0>, <&sdma 32 24 0>;
+				status = "disabled";
+			};
+
+			audmux: audmux@21d8000 {
+				compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			sai2: sai@21dc000 {
+				compatible = "fsl,imx6sx-sai";
+				reg = <0x021dc000 0x4000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
+					 <&clks IMX6SX_CLK_SAI2>,
+					 <&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 33 24 0>, <&sdma 34 24 0>;
+				status = "disabled";
+			};
+
+			qspi1: spi@21e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-qspi";
+				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_QSPI1>,
+					 <&clks IMX6SX_CLK_QSPI1>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			qspi2: spi@21e4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-qspi";
+				reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_QSPI2>,
+					 <&clks IMX6SX_CLK_QSPI2>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			uart2: serial@21e8000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@21ec000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart4: serial@21f0000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			i2c4: i2c@21f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C4>;
+				status = "disabled";
+			};
+		};
+
+		aips3: bus@2200000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02200000 0x100000>;
+			ranges;
+
+			spba-bus@2240000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02240000 0x40000>;
+				ranges;
+
+				csi1: csi@2214000 {
+					reg = <0x02214000 0x4000>;
+					interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
+						 <&clks IMX6SX_CLK_CSI>,
+						 <&clks IMX6SX_CLK_DCIC1>;
+					clock-names = "disp-axi", "csi_mclk", "dcic";
+					status = "disabled";
+				};
+
+				pxp: pxp@2218000 {
+					compatible = "fsl,imx6sx-pxp", "fsl,imx6ull-pxp";
+					reg = <0x02218000 0x4000>;
+					interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_PXP_AXI>;
+					clock-names = "axi";
+					power-domains = <&pd_disp>;
+					status = "disabled";
+				};
+
+				csi2: csi@221c000 {
+					reg = <0x0221c000 0x4000>;
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
+						 <&clks IMX6SX_CLK_CSI>,
+						 <&clks IMX6SX_CLK_DCIC2>;
+					clock-names = "disp-axi", "csi_mclk", "dcic";
+					status = "disabled";
+				};
+
+				lcdif1: lcdif@2220000 {
+					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
+					reg = <0x02220000 0x4000>;
+					interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+						 <&clks IMX6SX_CLK_LCDIF_APB>,
+						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+					clock-names = "pix", "axi", "disp_axi";
+					power-domains = <&pd_disp>;
+					status = "disabled";
+
+					port {
+						lcdif1_to_ldb: endpoint {
+						};
+					};
+				};
+
+				lcdif2: lcdif@2224000 {
+					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
+					reg = <0x02224000 0x4000>;
+					interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
+						 <&clks IMX6SX_CLK_LCDIF_APB>,
+						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+					clock-names = "pix", "axi", "disp_axi";
+					power-domains = <&pd_disp>;
+					status = "disabled";
+				};
+
+				vadc: vadc@2228000 {
+					reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
+					reg-names = "vadc-vafe", "vadc-vdec";
+					clocks = <&clks IMX6SX_CLK_VADC>,
+						 <&clks IMX6SX_CLK_CSI>;
+					clock-names = "vadc", "csi";
+					power-domains = <&pd_disp>;
+					status = "disabled";
+				};
+			};
+
+			adc1: adc@2280000 {
+				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
+				reg = <0x02280000 0x4000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
+				status = "disabled";
+			};
+
+			adc2: adc@2284000 {
+				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
+				reg = <0x02284000 0x4000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@2288000 {
+				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+				reg = <0x02288000 0x4000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				status = "disabled";
+			};
+
+			ecspi5: spi@228c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+				reg = <0x0228c000 0x4000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_ECSPI5>,
+					 <&clks IMX6SX_CLK_ECSPI5>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@22a0000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x022a0000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			pwm5: pwm@22a4000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x022a4000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM5>,
+					 <&clks IMX6SX_CLK_PWM5>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm6: pwm@22a8000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x022a8000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM6>,
+					 <&clks IMX6SX_CLK_PWM6>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm7: pwm@22ac000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x022ac000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM7>,
+					 <&clks IMX6SX_CLK_PWM7>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm8: pwm@22b0000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x022b0000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM8>,
+					 <&clks IMX6SX_CLK_PWM8>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+		};
+
+		pcie: pcie@8ffc000 {
+			compatible = "fsl,imx6sx-pcie";
+			reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0          0x08f80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SX_CLK_PCIE_AXI>,
+				 <&clks IMX6SX_CLK_LVDS1_OUT>,
+				 <&clks IMX6SX_CLK_PCIE_REF_125M>,
+				 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi";
+			power-domains = <&pd_disp>, <&pd_pci>;
+			power-domain-names = "pcie", "pcie_phy";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dts
new file mode 100644
index 0000000000000..2438669f149a2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/ {
+	model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
+	compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
new file mode 100644
index 0000000000000..155515fe13fad
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -0,0 +1,651 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/media/video-interfaces.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_peri_3v3: regulator-peri-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_peri_3v3>;
+		regulator-name = "VPERI_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+		/*
+		 * If you want to want to make this dynamic please
+		 * check schematics and test all affected peripherals:
+		 *
+		 * - sensors
+		 * - ethernet phy
+		 * - can
+		 * - bluetooth
+		 * - wm8960 audio codec
+		 * - ov5640 camera
+		 */
+		regulator-always-on;
+	};
+
+	reg_can_3v3: regulator-can-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
+	};
+
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai2>;
+		audio-codec = <&codec>;
+		audio-asrc = <&asrc>;
+		hp-det-gpio = <&gpio5 4 0>;
+		audio-routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT2", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"RINPUT1", "AMIC",
+			"RINPUT2", "AMIC",
+			"Mic Jack", "MICB",
+			"AMIC", "MICB";
+	};
+
+	spi-4 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		status = "okay";
+		sck-gpios = <&gpio5 11 0>;
+		mosi-gpios = <&gpio5 10 0>;
+		cs-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+			enable-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	panel {
+		compatible = "innolux,at043tn24";
+		backlight = <&backlight_display>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		wlf,shared-lrclk;
+		wlf,hp-cfg = <3 2 3>;
+		wlf,gpio-cfg = <1 3>;
+		clocks = <&clks IMX6UL_CLK_SAI2>;
+		clock-names = "mclk";
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_camera_clock>;
+		clocks = <&clks IMX6UL_CLK_CSI>;
+		clock-names = "xclk";
+		powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_parallel: endpoint {
+				remote-endpoint = <&parallel_from_ov5640>;
+				bus-width = <8>;
+				data-shift = <2>; /* lines 9:2 are used */
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pclk-sample = <1>;
+			};
+		};
+	};
+};
+
+&csi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_csi1>;
+	status = "okay";
+
+	port {
+		parallel_from_ov5640: endpoint {
+			remote-endpoint = <&ov5640_to_parallel>;
+			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_peri_3v3>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_peri_3v3>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-id0022.1560";
+			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id0022.1560";
+			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&gpio_spi {
+	eth0-phy-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "eth0-phy";
+	};
+
+	eth1-phy-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "eth1-phy";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	magnetometer@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		vdd-supply = <&reg_peri_3v3>;
+		vddio-supply = <&reg_peri_3v3>;
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xfff>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	broken-cd;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_camera_clock: cameraclockgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
+		>;
+	};
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18  0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19  0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20  0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21  0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22  0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23  0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+			/* used for lcd reset */
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK	0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00	0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01	0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02	0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03	0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B	0x70a1
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x17059
+		>;
+	};
+
+	pinctrl_peri_3v3: peri3v3grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT   0x110b0
+		>;
+	};
+
+	pinctrl_sim2: sim2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0xb808
+			MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x31
+			MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0xb808
+			MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0xb808
+			MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0xb809
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x3008
+		>;
+	};
+
+	pinctrl_spi4: spi4grp {
+		fsl,pins = <
+			MX6UL_PAD_BOOT_MODE0__GPIO5_IO10	0x70a1
+			MX6UL_PAD_BOOT_MODE1__GPIO5_IO11	0x70a1
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x70a1
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x80000000
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     	0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     	0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x17059 /* SD1 CD */
+			MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT    0x17059 /* SD1 VSELECT */
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts
new file mode 100644
index 0000000000000..3792679c0c904
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore6UL SBC Express board device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6ul.dtsi"
+#include "imx6ul-ccimx6ulsom.dtsi"
+
+/ {
+	model = "Digi International ConnectCore 6UL SBC Express.";
+	compatible = "digi,ccimx6ulsbcexpress", "digi,ccimx6ulsom",
+		     "fsl,imx6ul";
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&ext_3v3>;
+	status = "okay";
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3_master>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			smsc,disable-energy-detect;
+			reg = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	broken-cd;      /* no carrier detect line (use polling) */
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			/* GPIO1_4/ADC1_IN4 (pin 7 of the expansion header) */
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04        0xb0
+		>;
+	};
+
+	pinctrl_ecspi3_master: ecspi3grp1 {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0 /* Chip Select */
+		>;
+	};
+
+	pinctrl_ecspi3_slave: ecspi3grp2 {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
+			MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0	0x10b0 /* Chip Select */
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x40017051
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x10b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b1
+			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10071
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	/* General purpose pinctrl */
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* GPIOs BANK 3 */
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0xf030
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
new file mode 100644
index 0000000000000..3ec042bfccbac
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
@@ -0,0 +1,428 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore6UL SBC Pro board device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6ul.dtsi"
+#include "imx6ul-ccimx6ulsom.dtsi"
+
+/ {
+	model = "Digi International ConnectCore 6UL SBC Pro.";
+	compatible = "digi,ccimx6ulsbcpro", "digi,ccimx6ulsom", "fsl,imx6ul";
+
+	lcd_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm5 0 50000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel {
+		compatible = "auo,g101evn010";
+		power-supply = <&ldo4_ext>;
+		backlight = <&lcd_backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&ext_3v3>;
+	status = "okay";
+};
+
+/* CAN2 is multiplexed with UART2 RTS/CTS */
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&ext_3v3>;
+	status = "disabled";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_master>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <26>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			smsc,disable-energy-detect;
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			smsc,disable-energy-detect;
+			reg = <1>;
+		};
+	};
+};
+
+&gpio5 {
+	emmc-usd-mux-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_goodix_touch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat0_17
+		     &pinctrl_lcdif_clken
+		     &pinctrl_lcdif_hvsync>;
+	lcd-supply = <&ldo4_ext>;       /* BU90T82 LVDS bridge power */
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&ldo4_ext {
+	regulator-max-microvolt = <1800000>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm5 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+	status = "okay";
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&pwm8 {
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-1 = <&pinctrl_sai2_sleep>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-rates = <0>, <786432000>, <12288000>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	status = "okay";
+};
+
+/* UART2 RTS/CTS muxed with CAN2 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_4wires>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* UART3 RTS/CTS muxed with CAN 1 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_2wires>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* USDHC2 (microSD conflicts with eMMC) */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	broken-cd;	/* no carrier detect line (use polling) */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			/* EXP_GPIO_2 -> GPIO1_3/ADC1_IN3 */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03        0xb0
+		>;
+	};
+
+	pinctrl_ecspi1_master: ecspi1grp1 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x10b0
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x10b0
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x10b0
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x10b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x40017051
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x40017051
+		>;
+	};
+
+	pinctrl_enet2_mdio: mdioenet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+		>;
+	};
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+		>;
+	};
+
+	pinctrl_goodix_touch: goodixgrp{
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1020
+		>;
+	};
+
+	pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+		>;
+	};
+
+	pinctrl_lcdif_clken: lcdifctrlgrp1 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x17050
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+		>;
+	};
+
+	pinctrl_lcdif_hvsync: lcdifctrlgrp2 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__PWM4_OUT          0x110b0
+		>;
+	};
+
+	pinctrl_pwm5: pwm5grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__PWM5_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			/* Interrupt */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x10b0
+		>;
+	};
+
+	pinctrl_sai2_sleep: sai2grp-sleep {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x3000
+			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x3000
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x3000
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x3000
+			/* Interrupt */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x3000
+		>;
+	};
+
+	pinctrl_uart2_4wires: uart2grp-4wires {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_2wires: uart3grp-2wires {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10039
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
+			/* Mux selector between eMMC/SD# */
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x79
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x17059
+			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi
new file mode 100644
index 0000000000000..7d1a391431bd9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore 6UL System-On-Module device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>; /* will be filled by U-Boot */
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x4000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&vdda_adc_3v3>;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pfuze3000: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			int_3v3: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <6250>;
+				regulator-boot-on;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_arm_soc_in: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-ramp-delay = <6250>;
+				regulator-boot-on;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <925000>;
+				};
+			};
+
+			ext_3v3: sw2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <6250>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr3: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1300000>;
+				};
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			vdd_snvs_3v3: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vrefddr: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdda_adc_3v3: vldo1 {
+				compatible = "regulator-fixed";
+				regulator-name = "vref-adc-3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo2_ext: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vdda_wlan: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_high_in: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_int: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo4_ext: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcoin_chg: coin {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+/* UART1 (Bluetooth) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* USDHC1 (Wireless) */
+&usdhc1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_wifibt_ctrl>;
+	pinctrl-1 = <&pinctrl_usdhc1_sleep &pinctrl_wifibt_ctrl_sleep>;
+	non-removable;
+	no-1-8-v;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpmigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX   0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX   0x1b0b1
+			MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS    0x1b0b1
+			MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS    0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x17051
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_sleep: usdhc1grp-sleep {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__GPIO2_IO16           0x3000
+			MX6UL_PAD_SD1_CLK__GPIO2_IO17           0x3000
+			MX6UL_PAD_SD1_DATA0__GPIO2_IO18         0x3000
+			MX6UL_PAD_SD1_DATA1__GPIO2_IO19         0x3000
+			MX6UL_PAD_SD1_DATA2__GPIO2_IO20         0x3000
+			MX6UL_PAD_SD1_DATA3__GPIO2_IO21         0x3000
+		>;
+	};
+
+	pinctrl_wifibt_ctrl: wifibt-ctrl-grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x08a0
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x08a0
+		>;
+	};
+
+	pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x3000
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x3000
+		>;
+	};
+};
+
+&reg_arm {
+	vin-supply = <&vdd_arm_soc_in>;
+	regulator-allow-bypass;
+};
+
+&reg_soc {
+	vin-supply = <&vdd_arm_soc_in>;
+	regulator-allow-bypass;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
new file mode 100644
index 0000000000000..a0097da03f380
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Engicam GEAM6UL Starter Kit";
+	compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm8 0 100000>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <100>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6ul-geam-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clks IMX6UL_CLK_SAI2>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6UL_CLK_OSC>;
+		clock-names = "mclk";
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <28000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <30>;
+				hback-porch = <30>;
+				hsync-len = <64>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				vsync-len = <20>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm8 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&tsc {
+	measure-delay-time = <0x1ffff>;
+	pre-charge-time = <0x1fff>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0		/* ENET_nRST */
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT   0x110b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pin = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x4001b031
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK     0x17070
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD     0x10070
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0  0x17070
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1  0x17070
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2  0x17070
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3  0x17070
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
new file mode 100644
index 0000000000000..f2386dcb9ff2c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2019 Armadeus Systems <support@armadeus.com>
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>; /* will be filled by U-Boot */
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-reset-duration = <1>;
+	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_3v3>;
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			status = "okay";
+		};
+	};
+};
+
+/* Bluetooth */
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+/* WiFi */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x130b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x130b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x130b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x130b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			/* INT# */
+			MX6UL_PAD_NAND_DQS__GPIO4_IO16		0x1b0b0
+			/* RST# */
+			MX6UL_PAD_NAND_DATA00__GPIO4_IO02	0x130b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS	0x1b0b0
+			/* BT_REG_ON */
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x130b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
+			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17059
+			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17059
+			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__USDHC2_CMD	0x1b0b0
+			MX6UL_PAD_LCD_DATA19__USDHC2_CLK	0x100b0
+			MX6UL_PAD_LCD_DATA20__USDHC2_DATA0	0x1b0b0
+			MX6UL_PAD_LCD_DATA21__USDHC2_DATA1	0x1b0b0
+			MX6UL_PAD_LCD_DATA22__USDHC2_DATA2	0x1b0b0
+			MX6UL_PAD_LCD_DATA23__USDHC2_DATA3	0x1b0b0
+			/* WL_REG_ON */
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x130b0
+			/* WL_IRQ */
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
new file mode 100644
index 0000000000000..18cac19aa9b0f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2019 Armadeus Systems <support@armadeus.com>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 191000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_5v>;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user-led {
+			label = "User";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led>;
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_w1>;
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel: panel {
+		compatible = "armadeus,st0700-adapt";
+		power-supply = <&reg_3v3>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg1_vbus: regulator-usbotg1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg1vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg2_vbus: regulator-usbotg2vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg2vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg2_vbus>;
+		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xffff>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_id>;
+	vbus-supply = <&reg_usbotg1_vbus>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbotg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpios>;
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK	0x1b0b0
+			MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI	0x1b0b0
+			MX6UL_PAD_NAND_DATA06__ECSPI4_MISO	0x1b0b0
+			MX6UL_PAD_NAND_DATA01__GPIO4_IO03	0x1b0b0
+			MX6UL_PAD_NAND_DATA07__GPIO4_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x0b0b0
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_gpios: gpiosgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x0b0b0
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x0b0b0
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x0b0b0
+			MX6UL_PAD_NAND_RE_B__GPIO4_IO00		0x0b0b0
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x0b0b0
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0b0b0
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0b0b0
+			MX6UL_PAD_NAND_WE_B__GPIO4_IO01		0x0b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x100b1
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x100b1
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x100b1
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x100b1
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x100b1
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x100b1
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x100b1
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x100b1
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x100b1
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x100b1
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x100b1
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x100b1
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x100b1
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x100b1
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x100b1
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x100b1
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x100b1
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x100b1
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x100b1
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x100b1
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x100b1
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x100b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01       0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02       0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03       0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04       0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg1_vbus: usbotg1vbusgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-emmc.dts
new file mode 100644
index 0000000000000..1df3e376ae2c5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-emmc.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6ul-isiot.dtsi"
+
+/ {
+	model = "Engicam Is.IoT MX6UL eMMC Starter kit";
+	compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-nand.dts
new file mode 100644
index 0000000000000..8c26d4d1a7bf6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-nand.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6ul-isiot.dtsi"
+
+/ {
+	model = "Engicam Is.IoT MX6UL NAND Starter kit";
+	compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
+};
+
+&gpmi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi
new file mode 100644
index 0000000000000..14fc4828ba4ef
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm8 0 100000>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <100>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6ul-isiot-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clks IMX6UL_CLK_SAI2>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6UL_CLK_OSC>;
+		clock-names = "mclk";
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+
+	stmpe811: gpio-expander@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		stmpe: touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <28000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <30>;
+				hback-porch = <30>;
+				hsync-len = <64>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				vsync-len = <20>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm8 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+	bus-width = <8>;
+	no-1-8-v;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT   0x110b0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x4001b031
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp  {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK      0x17070
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD      0x10070
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0  0x17070
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1  0x17070
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2  0x17070
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3  0x17070
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4  0x17070
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5  0x17070
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6  0x17070
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7  0x17070
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B   0x17070
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts
new file mode 100644
index 0000000000000..0c643706a158b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul-kontron-bl.dts"
+
+/ {
+	model = "Kontron BL i.MX6UL 43 (N631X S 43)";
+	compatible = "kontron,bl-imx6ul-43", "kontron,bl-imx6ul",
+		     "kontron,sl-imx6ul", "fsl,imx6ul";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm7 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+};
+
+&i2c4 {
+	touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cap_touch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+	/* Leave status disabled because of missing display panel node */
+};
+
+&pwm7 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_cap_touch: captouchgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0 /* Touch Interrupt */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0 /* Touch Reset */
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Touch Wake */
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__PWM7_OUT		0x110b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi
new file mode 100644
index 0000000000000..43868311f48a5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "debug-led1";
+			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "debug-led2";
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "debug-led3";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm8 0 5000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_adc: regulator-vref-adc {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-adc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	vref-supply = <&reg_vref_adc>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	eeprom@0 {
+		compatible = "anvo,anv32e61w", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		spi-cpha;
+		spi-cpol;
+		pagesize = <1>;
+		size = <8192>;
+		address-width = <16>;
+	};
+};
+
+&fec1 {
+	pinctrl-0 = <&pinctrl_enet1>;
+	/delete-node/ mdio;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&pwm8 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	rs485-rts-active-low;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
+
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0xb0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI	0x100b1
+			MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x100b1	/* ECSPI1-CS1 */
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b009
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0	/* DOUT1 */
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* DIN1 */
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x1b0b0	/* DOUT2 */
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0	/* DIN2 */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x1b0b0	/* LED H14 */
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0	/* LED H15 */
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0	/* LED H16 */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001f8b0
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001f8b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__PWM8_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA04__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_NAND_DATA05__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS	0x1b0b1
+			/*
+			 * mux unused RTS to make sure it doesn't cause
+			 * any interrupts when it is undefined
+			 */
+			MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1 {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x100b1	/* SD1_CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl.dts
new file mode 100644
index 0000000000000..dadf6d3d5f521
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-kontron-sl.dtsi"
+#include "imx6ul-kontron-bl-common.dtsi"
+
+/ {
+	model = "Kontron BL i.MX6UL (N631X S)";
+	compatible = "kontron,bl-imx6ul", "kontron,sl-imx6ul", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi
new file mode 100644
index 0000000000000..dcf88f6103466
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x10000000>;
+		device_type = "memory";
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&fec2 {
+	phy-mode = "rmii";
+	status = "disabled";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		spi-max-frequency = <104000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+	};
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_out>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO      0x100b1
+			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI      0x100b1
+			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK      0x100b1
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22       0x100b1
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b009
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
+		>;
+	};
+
+	pinctrl_reset_out: rstoutgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl.dtsi
new file mode 100644
index 0000000000000..0580d043e5ae9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-kontron-sl-common.dtsi"
+
+/ {
+	model = "Kontron SL i.MX6UL (N631X SOM)";
+	compatible = "kontron,sl-imx6ul", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts
new file mode 100644
index 0000000000000..1d863a16bcf09
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2016 Grinn
+ *
+ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6ul-litesom.dtsi"
+
+/ {
+	model = "Grinn i.MX6UL liteBoard";
+	compatible = "grinn,imx6ul-liteboard", "grinn,imx6ul-litesom",
+		     "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usb_otg1_vbus: usb-otg1-vbus {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x79
+		>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-litesom.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-litesom.dtsi
new file mode 100644
index 0000000000000..8d6893210842b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-litesom.dtsi
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2016 Grinn
+ *
+ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Grinn i.MX6UL liteSOM";
+	compatible = "grinn,imx6ul-litesom", "fsl,imx6ul";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK	    0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD	    0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B  0x17059
+		>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-opos6ul.dtsi
new file mode 100644
index 0000000000000..6ce84f92b027c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-opos6ul.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2017 Armadeus Systems <support@armadeus.com>
+
+#include "imx6ul.dtsi"
+#include "imx6ul-imx6ull-opos6ul.dtsi"
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-opos6uldev.dts
new file mode 100644
index 0000000000000..375b98d7205ae
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-opos6uldev.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2017 Armadeus Systems <support@armadeus.com>
+
+/dts-v1/;
+#include "imx6ul-opos6ul.dtsi"
+#include "imx6ul-imx6ull-opos6uldev.dtsi"
+
+/ {
+	model = "Armadeus Systems OPOS6UL SoM (i.MX6UL) on OPOS6ULDev board";
+	compatible = "armadeus,imx6ul-opos6uldev", "armadeus,imx6ul-opos6ul", "fsl,imx6ul";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_tamper_gpios>;
+
+	pinctrl_tamper_gpios: tampergpiosgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x0b0b0
+		>;
+	};
+
+	pinctrl_usbotg2_vbus: usbotg2vbusgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_w1: w1grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x0b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-phycore-som.dtsi
new file mode 100644
index 0000000000000..a3ea1b2084625
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-phycore-som.dtsi
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PHYTEC phyCORE-i.MX6 UltraLite";
+	compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/*
+	 * Set the minimum memory size here and
+	 * let the bootloader set the real size.
+	 */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	gpio_leds_som: leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds_som>;
+		compatible = "gpio-leds";
+
+		led-phycore-green {
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "disabled";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			status = "disabled";
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "catalyst,24c32", "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled";
+};
+
+&wdog1 {
+	fsl,suspend-in-wait;
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x10010
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x10010
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x17059
+		>;
+	};
+
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2cgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2cgpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x4001b8b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-emmc.dts
new file mode 100644
index 0000000000000..cfc744f8fcade
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-emmc.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-phytec-phycore-som.dtsi"
+#include "imx6ul-phytec-segin.dtsi"
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ul-phytec-segin-peb-av-02.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with eMMC";
+	compatible = "phytec,imx6ul-pbacd10-emmc", "phytec,imx6ul-pbacd10",
+		     "phytec,imx6ul-pcl063","fsl,imx6ul";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&reg_can1_en {
+	status = "okay";
+};
+
+&reg_sound_1v8 {
+	status = "okay";
+};
+
+&reg_sound_3v3 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&tlv320 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-nand.dts
new file mode 100644
index 0000000000000..607eddc5030f5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-phytec-phycore-som.dtsi"
+#include "imx6ul-phytec-segin.dtsi"
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ul-phytec-segin-peb-av-02.dtsi"
+#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
+	compatible = "phytec,imx6ul-pbacd10-nand", "phytec,imx6ul-pbacd10",
+		     "phytec,imx6ul-pcl063", "fsl,imx6ul";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&tlv320 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&reg_can1_en {
+	status = "okay";
+};
+
+&reg_sound_1v8 {
+	status = "okay";
+};
+
+&reg_sound_3v3 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
new file mode 100644
index 0000000000000..ec042648bd98f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2016, 2020 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/ {
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <5>;
+		power-supply = <&reg_backlight_en>;
+		pwms = <&pwm3 0 5000000 0>;
+		status = "disabled";
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "edt,etm0700g0edh6";
+		backlight = <&backlight_lcd>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcdif_parallel_out>;
+			};
+		};
+	};
+
+	reg_backlight_en: regulator-backlight-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_en>;
+		regulator-name = "backlight-lcd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&i2c1 {
+	edt_ft5406: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5406>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+		status = "disabled";
+	};
+
+	stmpe: touchscreen@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio5>;
+		wakeup-source;
+		status = "disabled";
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+			touchscreen-inverted-x;
+			touchscreen-inverted-y;
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat>;
+	status = "disabled";
+
+	port {
+		lcdif_parallel_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_edt_ft5406: edtft5406grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_backlight_en: bachlightengrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x1b0b0
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x59
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x59
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x59
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x59
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x59
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x59
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x59
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x59
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x59
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x59
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x59
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x59
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x59
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x59
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x59
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x59
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x59
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x59
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x59
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x59
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x59
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x59
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__PWM3_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
new file mode 100644
index 0000000000000..2f3fd32a11679
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio_keys: gpio-keys {
+		compatible = "gpio-key";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+		status = "disabled";
+
+		user-led1 {
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+
+		user-led2 {
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x79
+		>;
+	};
+
+	pinctrl_user_leds: user_ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x79
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x79
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi
new file mode 100644
index 0000000000000..04477fd4b9a98
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_wl_en: regulator-wl-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wl>;
+		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x3031	/* BT ENABLE */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x3031	/* HOST WAKEUP */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x3031	/* DEV WAKEUP */
+		>;
+	};
+
+	pinctrl_uart2_bt: uart2grp-bt {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX   0x17059
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX   0x17059
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS    0x17059
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS    0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_wl: usdhc2grp-wl {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__USDHC2_CMD    0x10051
+			MX6UL_PAD_LCD_DATA19__USDHC2_CLK    0x10061
+			MX6UL_PAD_LCD_DATA20__USDHC2_DATA0  0x10051
+			MX6UL_PAD_LCD_DATA21__USDHC2_DATA1  0x10051
+			MX6UL_PAD_LCD_DATA22__USDHC2_DATA2  0x10051
+			MX6UL_PAD_LCD_DATA23__USDHC2_DATA3  0x10051
+		>;
+	};
+
+	pinctrl_wl: wlgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x3031	/* WLAN ENABLE */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_bt &pinctrl_bt>;
+	uart-has-rtscts;
+	status = "disabled";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_wl>;
+	vmmc-supply = <&reg_wl_en>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	status = "disabled";
+
+	brmcf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi
new file mode 100644
index 0000000000000..38ea4dcfa2281
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite";
+	compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	reg_sound_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "i2s-audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		status = "disabled";
+	};
+
+	reg_sound_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "i2s-audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "disabled";
+	};
+
+	reg_can1_en: regulator-can1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&princtrl_flexcan1_en>;
+		regulator-name = "Can";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_adc1_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&tlv320>;
+			clocks = <&clks IMX6UL_CLK_SAI2>;
+		};
+	};
+
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	vref-supply = <&reg_adc1_vref_3v3>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_en>;
+	status = "disabled";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "disabled";
+};
+
+&i2c1 {
+	tlv320: codec@18 {
+		compatible = "ti,tlv320aic3007";
+		#sound-dai-cells = <0>;
+		reg = <0x18>;
+		AVDD-supply = <&reg_sound_3v3>;
+		IOVDD-supply = <&reg_sound_3v3>;
+		DRVDD-supply = <&reg_sound_3v3>;
+		DVDD-supply = <&reg_sound_1v8>;
+		status = "disabled";
+	};
+
+	i2c_rtc: rtc@68 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		reg = <2>;
+		micrel,led-mode = <1>;
+		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+		clock-names = "rmii-ref";
+		status = "disabled";
+	};
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			<&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <19200000>;
+	fsl,sai-mclk-direction-output;
+	status = "disabled";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	status = "disabled";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	disable-wp;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1 {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	princtrl_flexcan1_en: flexcan1engrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts
new file mode 100644
index 0000000000000..5a74c7f68eb62
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx6ul-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX6UL and DWARF baseboard";
+	compatible = "technexion,imx6ul-pico-dwarf", "fsl,imx6ul";
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6ul-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts
new file mode 100644
index 0000000000000..09f7ffa9ad8c4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx6ul-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX6UL and HOBBIT baseboard";
+	compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6ul-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+
+	adc081c: adc@50 {
+		compatible = "ti,adc081c";
+		reg = <0x50>;
+		vref-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x10b0
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x10b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x10b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts
new file mode 100644
index 0000000000000..6cd7d5877d20c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx6ul-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX6UL and PI baseboard";
+	compatible = "technexion,imx6ul-pico-pi", "fsl,imx6ul";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6ul-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x10b0
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x10b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x10b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
new file mode 100644
index 0000000000000..4ffe99ed55ca2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 6 0>;
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	panel {
+		compatible = "vxt,vl050-8048nt-c01";
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+	phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			max-speed = <100>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			/* VDD_ARM_SOC_IN*/
+			sw1b_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* DRAM */
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DRAM */
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {  /* Wifi SDIO */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA06__GPIO4_IO08	0x10b0	/* WL_REG_ON */
+			MX6UL_PAD_NAND_DATA04__GPIO4_IO06	0x10b0	/* WL_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET2_MDC	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x800
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x79
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_GPIO1_IO03__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__I2C3_SCL	0x4001b8b0
+			MX6UL_PAD_UART1_RX_DATA__I2C3_SDA	0x4001b8b0
+			>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			/* LCD reset */
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x79
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x110b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC	0x1b0b0
+			MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK	0x1b0b0
+			MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA	0x110b0
+			MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA	0x1f0b8
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b0
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b0
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b0
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x10b0
+			>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B	0x03029
+			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
+			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17059
+			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17059
+			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6ul-pinfunc.h
new file mode 100644
index 0000000000000..380d2db13a9be
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pinfunc.h
@@ -0,0 +1,959 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2014 - 2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6UL_PINFUNC_H
+#define __DTS_IMX6UL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10		0x0014 0x02a0 0x0000 5 0
+#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11		0x0018 0x02a4 0x0000 5 0
+
+#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00		0x001c 0x02a8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01		0x0020 0x02ac 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02		0x0024 0x02b0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03		0x0028 0x02b4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04		0x002c 0x02b8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05		0x0030 0x02bc 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06		0x0034 0x02c0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07		0x0038 0x02c4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08		0x003c 0x02c8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09		0x0040 0x02cc 0x0000 5 0
+
+#define MX6UL_PAD_JTAG_MOD__SJC_MOD			0x0044 0x02d0 0x0000 0 0
+#define MX6UL_PAD_JTAG_MOD__GPT2_CLK			0x0044 0x02d0 0x05a0 1 0
+#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT			0x0044 0x02d0 0x0000 2 0
+#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M		0x0044 0x02d0 0x0000 3 0
+#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY		0x0044 0x02d0 0x04c0 4 0
+#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10			0x0044 0x02d0 0x0000 5 0
+#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00		0x0044 0x02d0 0x0610 6 0
+#define MX6UL_PAD_JTAG_TMS__SJC_TMS			0x0048 0x02d4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1		0x0048 0x02d4 0x0598 1 0
+#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK			0x0048 0x02d4 0x05f0 2 0
+#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1			0x0048 0x02d4 0x0000 3 0
+#define MX6UL_PAD_JTAG_TMS__CCM_WAIT			0x0048 0x02d4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11			0x0048 0x02d4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01		0x0048 0x02d4 0x0614 6 0
+#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT			0x0048 0x02d4 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDO__SJC_TDO			0x004c 0x02d8 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2		0x004c 0x02d8 0x059c 1 0
+#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC		0x004c 0x02d8 0x05fc 2 0
+#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2			0x004c 0x02d8 0x0000 3 0
+#define MX6UL_PAD_JTAG_TDO__CCM_STOP			0x004c 0x02d8 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12			0x004c 0x02d8 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT			0x004c 0x02d8 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT			0x004c 0x02d8 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDI__SJC_TDI			0x0050 0x02dc 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1		0x0050 0x02dc 0x0000 1 0
+#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK		0x0050 0x02dc 0x05f8 2 0
+#define MX6UL_PAD_JTAG_TDI__PWM6_OUT			0x0050 0x02dc 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13			0x0050 0x02dc 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDI__MQS_LEFT			0x0050 0x02dc 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL		0x0050 0x02dc 0x0000 8 0
+#define MX6UL_PAD_JTAG_TCK__SJC_TCK			0x0054 0x02e0 0x0000 0 0
+#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2		0x0054 0x02e0 0x0000 1 0
+#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA		0x0054 0x02e0 0x05f4 2 0
+#define MX6UL_PAD_JTAG_TCK__PWM7_OUT			0x0054 0x02e0 0x0000 4 0
+#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14			0x0054 0x02e0 0x0000 5 0
+#define MX6UL_PAD_JTAG_TCK__OSC32K_32K_OUT			0x0054 0x02e0 0x0000 6 0
+#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL		0x0054 0x02e0 0x0000 8 0
+#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB		0x0058 0x02e4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3		0x0058 0x02e4 0x0000 1 0
+#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA		0x0058 0x02e4 0x0000 2 0
+#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT			0x0058 0x02e4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15		0x0058 0x02e4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TRST_B__REF_CLK_24M		0x0058 0x02e4 0x0000 6 0
+#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS		0x0058 0x02e4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL			0x005c 0x02e8 0x05ac 0 1
+#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1		0x005c 0x02e8 0x058c 1 0
+#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID		0x005c 0x02e8 0x04b8 2 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1		0x005c 0x02e8 0x0574 3 0
+#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT			0x005c 0x02e8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00		0x005c 0x02e8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN	0x005c 0x02e8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET		0x005c 0x02e8 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B		0x005c 0x02e8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA			0x0060 0x02ec 0x05b0 0 1
+#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1		0x0060 0x02ec 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC		0x0060 0x02ec 0x0664 2 0
+#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2		0x0060 0x02ec 0x057c 3 0
+#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT			0x0060 0x02ec 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0x0060 0x02ec 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT	0x0060 0x02ec 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET		0x0060 0x02ec 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B		0x0060 0x02ec 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL			0x0064 0x02f0 0x05a4 0 0
+#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2		0x0064 0x02f0 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR		0x0064 0x02f0 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M		0x0064 0x02f0 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP			0x0064 0x02f0 0x066c 4 0
+#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0x0064 0x02f0 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00		0x0064 0x02f0 0x0610 6 1
+#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET		0x0064 0x02f0 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX		0x0064 0x02f0 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX		0x0064 0x02f0 0x0624 8 0
+#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA			0x0068 0x02f4 0x05a8 0 1
+#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3		0x0068 0x02f4 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC		0x0068 0x02f4 0x0660 2 0
+#define MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT		0x0068 0x02f4 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B		0x0068 0x02f4 0x0668 4 0
+#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0x0068 0x02f4 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_EXT_CLK		0x0068 0x02f4 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK		0x0068 0x02f4 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX		0x0068 0x02f4 0x0624 8 1
+#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX		0x0068 0x02f4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1		0x006c 0x02f8 0x0574 0 1
+#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT			0x006c 0x02f8 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR		0x006c 0x02f8 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO04__REF_CLK_24M		0x006c 0x02f8 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B		0x006c 0x02f8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0x006c 0x02f8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN	0x006c 0x02f8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX		0x006c 0x02f8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX		0x006c 0x02f8 0x0644 8 2
+#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2		0x0070 0x02fc 0x057c 0 1
+#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT			0x0070 0x02fc 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID		0x0070 0x02fc 0x04bc 2 0
+#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD			0x0070 0x02fc 0x0530 3 0
+#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT		0x0070 0x02fc 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05		0x0070 0x02fc 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT	0x0070 0x02fc 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX		0x0070 0x02fc 0x0644 8 3
+#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX		0x0070 0x02fc 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO		0x0074 0x0300 0x0578 0 0
+#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO		0x0074 0x0300 0x0580 1 0
+#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE		0x0074 0x0300 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK			0x0074 0x0300 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP			0x0074 0x0300 0x069c 4 0
+#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06		0x0074 0x0300 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT			0x0074 0x0300 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B		0x0074 0x0300 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS		0x0074 0x0300 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS		0x0074 0x0300 0x0620 8 0
+#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC			0x0078 0x0304 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC			0x0078 0x0304 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE		0x0078 0x0304 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK		0x0078 0x0304 0x0528 3 0
+#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B		0x0078 0x0304 0x0674 4 1
+#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07		0x0078 0x0304 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO07__CCM_STOP			0x0078 0x0304 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS		0x0078 0x0304 0x0620 8 1
+#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS		0x0078 0x0304 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT			0x007c 0x0308 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B		0x007c 0x0308 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT			0x007c 0x0308 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC			0x007c 0x0308 0x052c 3 1
+#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT		0x007c 0x0308 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08		0x007c 0x0308 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY		0x007c 0x0308 0x04c0 6 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS		0x007c 0x0308 0x0640 8 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS		0x007c 0x0308 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT			0x0080 0x030c 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY		0x0080 0x030c 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN			0x0080 0x030c 0x0618 2 0
+#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC			0x0080 0x030c 0x0524 3 1
+#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B		0x0080 0x030c 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09		0x0080 0x030c 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B		0x0080 0x030c 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS		0x0080 0x030c 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS		0x0080 0x030c 0x0640 8 2
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX		0x0084 0x0310 0x0000 0 0
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX		0x0084 0x0310 0x0624 0 2
+#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02		0x0084 0x0310 0x0000 1 0
+#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL		0x0084 0x0310 0x05b4 2 0
+#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02		0x0084 0x0310 0x04c4 3 1
+#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1		0x0084 0x0310 0x0000 4 0
+#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16		0x0084 0x0310 0x0000 5 0
+#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT		0x0084 0x0310 0x0000 8 0
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX		0x0088 0x0314 0x0624 0 3
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX		0x0088 0x0314 0x0000 0 0
+#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03		0x0088 0x0314 0x0000 1 0
+#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA		0x0088 0x0314 0x05b8 2 0
+#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03		0x0088 0x0314 0x04c8 3 1
+#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK		0x0088 0x0314 0x0594 4 0
+#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17		0x0088 0x0314 0x0000 5 0
+#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN		0x0088 0x0314 0x0618 8 1
+#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS		0x008c 0x0318 0x0000 0 0
+#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS		0x008c 0x0318 0x0620 0 2
+#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK		0x008c 0x0318 0x0000 1 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP		0x008c 0x0318 0x066c 2 1
+#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04		0x008c 0x0318 0x04d8 3 0
+#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN	0x008c 0x0318 0x0000 4 0
+#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18		0x008c 0x0318 0x0000 5 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP		0x008c 0x0318 0x069c 8 1
+#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS		0x0090 0x031c 0x0620 0 3
+#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS		0x0090 0x031c 0x0000 0 0
+#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER		0x0090 0x031c 0x0000 1 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B		0x0090 0x031c 0x0668 2 1
+#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05		0x0090 0x031c 0x04cc 3 1
+#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT	0x0090 0x031c 0x0000 4 0
+#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19		0x0090 0x031c 0x0000 5 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B		0x0090 0x031c 0x0674 8 2
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX		0x0094 0x0320 0x0000 0 0
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX		0x0094 0x0320 0x062c 0 0
+#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02		0x0094 0x0320 0x0000 1 0
+#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL		0x0094 0x0320 0x05bc 2 0
+#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06		0x0094 0x0320 0x04dc 3 0
+#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1		0x0094 0x0320 0x058c 4 1
+#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20		0x0094 0x0320 0x0000 5 0
+#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0		0x0094 0x0320 0x0560 8 0
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX		0x0098 0x0324 0x062c 0 1
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX		0x0098 0x0324 0x0000 0 0
+#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03		0x0098 0x0324 0x0000 1 0
+#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA		0x0098 0x0324 0x05c0 2 0
+#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07		0x0098 0x0324 0x04e0 3 0
+#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2		0x0098 0x0324 0x0590 4 0
+#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21		0x0098 0x0324 0x0000 5 0
+#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE		0x0098 0x0324 0x0000 7 0
+#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK		0x0098 0x0324 0x0554 8 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS		0x009c 0x0328 0x0000 0 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS		0x009c 0x0328 0x0628 0 0
+#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS		0x009c 0x0328 0x0000 1 0
+#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX		0x009c 0x0328 0x0000 2 0
+#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08		0x009c 0x0328 0x04e4 3 0
+#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2		0x009c 0x0328 0x0000 4 0
+#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22		0x009c 0x0328 0x0000 5 0
+#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B			0x009c 0x0328 0x0000 7 0
+#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI		0x009c 0x0328 0x055c 8 0
+#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS		0x00a0 0x032c 0x0628 0 1
+#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS		0x00a0 0x032c 0x0000 0 0
+#define MX6UL_PAD_UART2_RTS_B__ENET1_COL		0x00a0 0x032c 0x0000 1 0
+#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX		0x00a0 0x032c 0x0588 2 0
+#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09		0x00a0 0x032c 0x04e8 3 0
+#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3		0x00a0 0x032c 0x0000 4 0
+#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23		0x00a0 0x032c 0x0000 5 0
+#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL			0x00a0 0x032c 0x0000 7 0
+#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO		0x00a0 0x032c 0x0558 8 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX		0x00a4 0x0330 0x0000 0 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX		0x00a4 0x0330 0x0634 0 0
+#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02		0x00a4 0x0330 0x0000 1 0
+#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD		0x00a4 0x0330 0x0000 2 0
+#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01		0x00a4 0x0330 0x04d4 3 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS		0x00a4 0x0330 0x0000 4 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS		0x00a4 0x0330 0x0628 4 2
+#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24		0x00a4 0x0330 0x0000 5 0
+#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT		0x00a4 0x0330 0x0000 7 0
+#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID		0x00a4 0x0330 0x04b8 8 1
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX		0x00a8 0x0334 0x0634 0 1
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX		0x00a8 0x0334 0x0000 0 0
+#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03		0x00a8 0x0334 0x0000 1 0
+#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD		0x00a8 0x0334 0x0000 2 0
+#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00		0x00a8 0x0334 0x04d0 3 0
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS		0x00a8 0x0334 0x0628 4 3
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS		0x00a8 0x0334 0x0000 4 0
+#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25		0x00a8 0x0334 0x0000 5 0
+#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT		0x00a8 0x0334 0x0000 8 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS		0x00ac 0x0338 0x0000 0 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS		0x00ac 0x0338 0x0630 0 0
+#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK		0x00ac 0x0338 0x0000 1 0
+#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX		0x00ac 0x0338 0x0000 2 0
+#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10		0x00ac 0x0338 0x04ec 3 0
+#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN	0x00ac 0x0338 0x0000 4 0
+#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26		0x00ac 0x0338 0x0000 5 0
+#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT		0x00ac 0x0338 0x0000 8 0
+#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS		0x00b0 0x033c 0x0630 0 1
+#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS		0x00b0 0x033c 0x0000 0 0
+#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER		0x00b0 0x033c 0x0000 1 0
+#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX		0x00b0 0x033c 0x0584 2 0
+#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11		0x00b0 0x033c 0x04f0 3 0
+#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT	0x00b0 0x033c 0x0000 4 0
+#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27		0x00b0 0x033c 0x0000 5 0
+#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B		0x00b0 0x033c 0x0000 8 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX		0x00b4 0x0340 0x0000 0 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX		0x00b4 0x0340 0x063c 0 0
+#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02		0x00b4 0x0340 0x0000 1 0
+#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL		0x00b4 0x0340 0x05a4 2 1
+#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12		0x00b4 0x0340 0x04f4 3 0
+#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02	0x00b4 0x0340 0x0000 4 0
+#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28		0x00b4 0x0340 0x0000 5 0
+#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK		0x00b4 0x0340 0x0544 8 1
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX		0x00b8 0x0344 0x063c 0 1
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX		0x00b8 0x0344 0x0000 0 0
+#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03		0x00b8 0x0344 0x0000 1 0
+#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA		0x00b8 0x0344 0x05a8 2 2
+#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13		0x00b8 0x0344 0x04f8 3 0
+#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01	0x00b8 0x0344 0x0000 4 0
+#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29		0x00b8 0x0344 0x0000 5 0
+#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0		0x00b8 0x0344 0x0550 8 1
+#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30		0x00bc 0x0348 0x0000 5 0
+#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI		0x00bc 0x0348 0x054c 8 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX		0x00bc 0x0348 0x0000 0 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX		0x00bc 0x0348 0x0644 0 4
+#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS		0x00bc 0x0348 0x0000 1 0
+#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL		0x00bc 0x0348 0x05ac 2 2
+#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14		0x00bc 0x0348 0x04fc 3 0
+#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00	0x00bc 0x0348 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX		0x00c0 0x034c 0x0644 0 5
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX		0x00c0 0x034c 0x0000 0 0
+#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL		0x00c0 0x034c 0x0000 1 0
+#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA		0x00c0 0x034c 0x05b0 2 2
+#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15		0x00c0 0x034c 0x0500 3 0
+#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB	0x00c0 0x034c 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31		0x00c0 0x034c 0x0000 5 0
+#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO		0x00c0 0x034c 0x0548 8 1
+#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00		0x00c4 0x0350 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS		0x00c4 0x0350 0x0638 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS		0x00c4 0x0350 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT		0x00c4 0x0350 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16		0x00c4 0x0350 0x0504 3 0
+#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX		0x00c4 0x0350 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00		0x00c4 0x0350 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00		0x00c4 0x0350 0x05d0 6 0
+#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL		0x00c4 0x0350 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01		0x00c8 0x0354 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS		0x00c8 0x0354 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS		0x00c8 0x0354 0x0638 1 1
+#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT		0x00c8 0x0354 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17		0x00c8 0x0354 0x0508 3 0
+#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX		0x00c8 0x0354 0x0584 4 1
+#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01		0x00c8 0x0354 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00		0x00c8 0x0354 0x05c4 6 0
+#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL		0x00c8 0x0354 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN		0x00cc 0x0358 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS		0x00cc 0x0358 0x0640 1 3
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS		0x00cc 0x0358 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT		0x00cc 0x0358 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18		0x00cc 0x0358 0x050c 3 0
+#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX		0x00cc 0x0358 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02		0x00cc 0x0358 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01		0x00cc 0x0358 0x05d4 6 0
+#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT		0x00cc 0x0358 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00		0x00d0 0x035c 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS		0x00d0 0x035c 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS		0x00d0 0x035c 0x0640 1 4
+#define MX6UL_PAD_ENET1_TX_DATA0__REF_CLK_24M		0x00d0 0x035c 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19		0x00d0 0x035c 0x0510 3 0
+#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX		0x00d0 0x035c 0x0588 4 1
+#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03		0x00d0 0x035c 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01		0x00d0 0x035c 0x05c8 6 0
+#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT	0x00d0 0x035c 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01		0x00d4 0x0360 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS		0x00d4 0x0360 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS		0x00d4 0x0360 0x0648 1 2
+#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT		0x00d4 0x0360 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20		0x00d4 0x0360 0x0514 3 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO		0x00d4 0x0360 0x0580 4 1
+#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04		0x00d4 0x0360 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02		0x00d4 0x0360 0x05d8 6 0
+#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB	0x00d4 0x0360 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN		0x00d8 0x0364 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS		0x00d8 0x0364 0x0648 1 3
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS		0x00d8 0x0364 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT			0x00d8 0x0364 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21		0x00d8 0x0364 0x0518 3 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC		0x00d8 0x0364 0x0000 4 0
+#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05		0x00d8 0x0364 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02		0x00d8 0x0364 0x05cc 6 0
+#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB	0x00d8 0x0364 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK		0x00dc 0x0368 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS		0x00dc 0x0368 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS		0x00dc 0x0368 0x0650 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT		0x00dc 0x0368 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22		0x00dc 0x0368 0x051c 3 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1		0x00dc 0x0368 0x0574 4 2
+#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06		0x00dc 0x0368 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03		0x00dc 0x0368 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK		0x00dc 0x0368 0x0594 8 1
+#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER		0x00e0 0x036c 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS		0x00e0 0x036c 0x0650 1 1
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS		0x00e0 0x036c 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT			0x00e0 0x036c 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23		0x00e0 0x036c 0x0520 3 0
+#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE			0x00e0 0x036c 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07		0x00e0 0x036c 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03		0x00e0 0x036c 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2		0x00e0 0x036c 0x0590 8 1
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00		0x00e4 0x0370 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX		0x00e4 0x0370 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX		0x00e4 0x0370 0x064c 1 1
+#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD	0x00e4 0x0370 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL		0x00e4 0x0370 0x05b4 3 1
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO		0x00e4 0x0370 0x0578 4 1
+#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08		0x00e4 0x0370 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04		0x00e4 0x0370 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR		0x00e4 0x0370 0x0000 8 0
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01		0x00e8 0x0374 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX		0x00e8 0x0374 0x064c 1 2
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX		0x00e8 0x0374 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_CLK	0x00e8 0x0374 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA		0x00e8 0x0374 0x05b8 3 1
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC		0x00e8 0x0374 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09		0x00e8 0x0374 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04		0x00e8 0x0374 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC		0x00e8 0x0374 0x0664 8 1
+#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN		0x00ec 0x0378 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX		0x00ec 0x0378 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX		0x00ec 0x0378 0x0654 1 0
+#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B		0x00ec 0x0378 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL			0x00ec 0x0378 0x05bc 3 1
+#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26		0x00ec 0x0378 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10		0x00ec 0x0378 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05		0x00ec 0x0378 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M	0x00ec 0x0378 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00		0x00f0 0x037c 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX		0x00f0 0x037c 0x0654 1 1
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX		0x00f0 0x037c 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN	0x00f0 0x037c 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA		0x00f0 0x037c 0x05c0 3 1
+#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02		0x00f0 0x037c 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11		0x00f0 0x037c 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05		0x00f0 0x037c 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA0__REF_CLK_24M		0x00f0 0x037c 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01		0x00f4 0x0380 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX		0x00f4 0x0380 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX		0x00f4 0x0380 0x065c 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD	0x00f4 0x0380 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK		0x00f4 0x0380 0x0564 3 0
+#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03		0x00f4 0x0380 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12		0x00f4 0x0380 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06		0x00f4 0x0380 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR		0x00f4 0x0380 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN		0x00f8 0x0384 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX		0x00f8 0x0384 0x065c 1 1
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX		0x00f8 0x0384 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_CLK		0x00f8 0x0384 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI		0x00f8 0x0384 0x056c 3 0
+#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN		0x00f8 0x0384 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13		0x00f8 0x0384 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06		0x00f8 0x0384 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC		0x00f8 0x0384 0x0660 8 1
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK		0x00fc 0x0388 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS		0x00fc 0x0388 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS		0x00fc 0x0388 0x0658 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B	0x00fc 0x0388 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO		0x00fc 0x0388 0x0568 3 0
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2		0x00fc 0x0388 0x057c 4 2
+#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14		0x00fc 0x0388 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07		0x00fc 0x0388 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID		0x00fc 0x0388 0x04bc 8 1
+#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER		0x0100 0x038c 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS		0x0100 0x038c 0x0658 1 1
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS		0x0100 0x038c 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN		0x0100 0x038c 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0		0x0100 0x038c 0x0570 3 0
+#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25		0x0100 0x038c 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15		0x0100 0x038c 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07		0x0100 0x038c 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY		0x0100 0x038c 0x0000 8 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_CLK			0x0104 0x0390 0x0000 0 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN			0x0104 0x0390 0x0000 1 0
+#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX			0x0104 0x0390 0x0000 2 0
+#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX			0x0104 0x0390 0x063c 2 2
+#define MX6UL_PAD_LCD_CLK__SAI3_MCLK			0x0104 0x0390 0x0600 3 0
+#define MX6UL_PAD_LCD_CLK__EIM_CS2_B			0x0104 0x0390 0x0000 4 0
+#define MX6UL_PAD_LCD_CLK__GPIO3_IO00			0x0104 0x0390 0x0000 5 0
+#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB		0x0104 0x0390 0x0000 8 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE		0x0108 0x0394 0x0000 0 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E		0x0108 0x0394 0x0000 1 0
+#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX		0x0108 0x0394 0x063c 2 3
+#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX		0x0108 0x0394 0x0000 2 0
+#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC		0x0108 0x0394 0x060c 3 0
+#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B			0x0108 0x0394 0x0000 4 0
+#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01		0x0108 0x0394 0x0000 5 0
+#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY		0x0108 0x0394 0x0000 8 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC		0x010c 0x0398 0x05dc 0 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS			0x010c 0x0398 0x0000 1 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS		0x010c 0x0398 0x0000 2 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS		0x010c 0x0398 0x0638 2 2
+#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK		0x010c 0x0398 0x0608 3 0
+#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB	0x010c 0x0398 0x0000 4 0
+#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02			0x010c 0x0398 0x0000 5 0
+#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1			0x010c 0x0398 0x0000 8 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC		0x0110 0x039c 0x0000 0 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY			0x0110 0x039c 0x05dc 1 1
+#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS		0x0110 0x039c 0x0638 2 3
+#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS		0x0110 0x039c 0x0000 2 0
+#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA		0x0110 0x039c 0x0604 3 0
+#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B		0x0110 0x039c 0x0000 4 0
+#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03			0x0110 0x039c 0x0000 5 0
+#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2			0x0110 0x039c 0x0000 8 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_RESET		0x0114 0x03a0 0x0000 0 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_CS			0x0114 0x03a0 0x0000 1 0
+#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI		0x0114 0x03a0 0x0000 2 0
+#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA		0x0114 0x03a0 0x0000 3 0
+#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY		0x0114 0x03a0 0x0000 4 0
+#define MX6UL_PAD_LCD_RESET__GPIO3_IO04			0x0114 0x03a0 0x0000 5 0
+#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3			0x0114 0x03a0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00		0x0118 0x03a4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA00__PWM1_OUT			0x0118 0x03a4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA00__CA7_MX6UL_TRACE0		0x0118 0x03a4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN	0x0118 0x03a4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA00__I2C3_SDA			0x0118 0x03a4 0x05b8 4 2
+#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05		0x0118 0x03a4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00		0x0118 0x03a4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK			0x0118 0x03a4 0x05e0 8 1
+#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01		0x011c 0x03a8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA01__PWM2_OUT			0x011c 0x03a8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA01__CA7_MX6UL_TRACE1		0x011c 0x03a8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT	0x011c 0x03a8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA01__I2C3_SCL			0x011c 0x03a8 0x05b4 4 2
+#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06		0x011c 0x03a8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01		0x011c 0x03a8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC		0x011c 0x03a8 0x05ec 8 0
+#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02		0x0120 0x03ac 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA02__PWM3_OUT			0x0120 0x03ac 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA02__CA7_MX6UL_TRACE2		0x0120 0x03ac 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN	0x0120 0x03ac 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA02__I2C4_SDA			0x0120 0x03ac 0x05c0 4 2
+#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07		0x0120 0x03ac 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02		0x0120 0x03ac 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK		0x0120 0x03ac 0x05e8 8 0
+#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03		0x0124 0x03b0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA03__PWM4_OUT			0x0124 0x03b0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA03__CA7_MX6UL_TRACE3		0x0124 0x03b0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT	0x0124 0x03b0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA03__I2C4_SCL			0x0124 0x03b0 0x05bc 4 2
+#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08		0x0124 0x03b0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03		0x0124 0x03b0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA		0x0124 0x03b0 0x05e4 8 0
+#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04		0x0128 0x03b4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS		0x0128 0x03b4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS		0x0128 0x03b4 0x0658 1 2
+#define MX6UL_PAD_LCD_DATA04__CA7_MX6UL_TRACE4		0x0128 0x03b4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN	0x0128 0x03b4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK		0x0128 0x03b4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09		0x0128 0x03b4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04		0x0128 0x03b4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA		0x0128 0x03b4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05		0x012c 0x03b8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS		0x012c 0x03b8 0x0658 1 3
+#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS		0x012c 0x03b8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA05__CA7_MX6UL_TRACE5		0x012c 0x03b8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT	0x012c 0x03b8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT			0x012c 0x03b8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10		0x012c 0x03b8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05		0x012c 0x03b8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1		0x012c 0x03b8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06		0x0130 0x03bc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS		0x0130 0x03bc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS		0x0130 0x03bc 0x0650 1 2
+#define MX6UL_PAD_LCD_DATA06__CA7_MX6UL_TRACE6		0x0130 0x03bc 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN	0x0130 0x03bc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK		0x0130 0x03bc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11		0x0130 0x03bc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06		0x0130 0x03bc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2		0x0130 0x03bc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07		0x0134 0x03c0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS		0x0134 0x03c0 0x0650 1 3
+#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS		0x0134 0x03c0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA07__CA7_MX6UL_TRACE7		0x0134 0x03c0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT	0x0134 0x03c0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK		0x0134 0x03c0 0x061c 4 0
+#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12		0x0134 0x03c0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07		0x0134 0x03c0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3		0x0134 0x03c0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08		0x0138 0x03c4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA08__SPDIF_IN			0x0138 0x03c4 0x0618 1 2
+#define MX6UL_PAD_LCD_DATA08__CA7_MX6UL_TRACE8		0x0138 0x03c4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA08__CSI_DATA16		0x0138 0x03c4 0x0504 3 1
+#define MX6UL_PAD_LCD_DATA08__EIM_DATA00		0x0138 0x03c4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13		0x0138 0x03c4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08		0x0138 0x03c4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX		0x0138 0x03c4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09		0x013c 0x03c8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK			0x013c 0x03c8 0x0600 1 1
+#define MX6UL_PAD_LCD_DATA09__CA7_MX6UL_TRACE9		0x013c 0x03c8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA09__CSI_DATA17		0x013c 0x03c8 0x0508 3 1
+#define MX6UL_PAD_LCD_DATA09__EIM_DATA01		0x013c 0x03c8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14		0x013c 0x03c8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09		0x013c 0x03c8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX		0x013c 0x03c8 0x0584 8 2
+#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10		0x0140 0x03cc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC		0x0140 0x03cc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA10__CA7_MX6UL_TRACE10		0x0140 0x03cc 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA10__CSI_DATA18		0x0140 0x03cc 0x050c 3 1
+#define MX6UL_PAD_LCD_DATA10__EIM_DATA02		0x0140 0x03cc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15		0x0140 0x03cc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10		0x0140 0x03cc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX		0x0140 0x03cc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11		0x0144 0x03d0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK		0x0144 0x03d0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA11__CA7_MX6UL_TRACE11		0x0144 0x03d0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA11__CSI_DATA19		0x0144 0x03d0 0x0510 3 1
+#define MX6UL_PAD_LCD_DATA11__EIM_DATA03		0x0144 0x03d0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16		0x0144 0x03d0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11		0x0144 0x03d0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX		0x0144 0x03d0 0x0588 8 2
+#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12		0x0148 0x03d4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC		0x0148 0x03d4 0x060c 1 1
+#define MX6UL_PAD_LCD_DATA12__CA7_MX6UL_TRACE12		0x0148 0x03d4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA12__CSI_DATA20		0x0148 0x03d4 0x0514 3 1
+#define MX6UL_PAD_LCD_DATA12__EIM_DATA04		0x0148 0x03d4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17		0x0148 0x03d4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12		0x0148 0x03d4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY		0x0148 0x03d4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13		0x014c 0x03d8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK		0x014c 0x03d8 0x0608 1 1
+#define MX6UL_PAD_LCD_DATA13__CA7_MX6UL_TRACE13		0x014c 0x03d8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA13__CSI_DATA21		0x014c 0x03d8 0x0518 3 1
+#define MX6UL_PAD_LCD_DATA13__EIM_DATA05		0x014c 0x03d8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18		0x014c 0x03d8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13		0x014c 0x03d8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B		0x014c 0x03d8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14		0x0150 0x03dc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA		0x0150 0x03dc 0x0604 1 1
+#define MX6UL_PAD_LCD_DATA14__CA7_MX6UL_TRACE14		0x0150 0x03dc 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA14__CSI_DATA22		0x0150 0x03dc 0x051c 3 1
+#define MX6UL_PAD_LCD_DATA14__EIM_DATA06		0x0150 0x03dc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19		0x0150 0x03dc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14		0x0150 0x03dc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4		0x0150 0x03dc 0x068c 8 0
+#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15		0x0154 0x03e0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA		0x0154 0x03e0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA15__CA7_MX6UL_TRACE15		0x0154 0x03e0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA15__CSI_DATA23		0x0154 0x03e0 0x0520 3 1
+#define MX6UL_PAD_LCD_DATA15__EIM_DATA07		0x0154 0x03e0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20		0x0154 0x03e0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15		0x0154 0x03e0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5		0x0154 0x03e0 0x0690 8 0
+#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16		0x0158 0x03e4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX		0x0158 0x03e4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX		0x0158 0x03e4 0x0654 1 2
+#define MX6UL_PAD_LCD_DATA16__CA7_MX6UL_TRACE_CLK	0x0158 0x03e4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA16__CSI_DATA01		0x0158 0x03e4 0x04d4 3 1
+#define MX6UL_PAD_LCD_DATA16__EIM_DATA08		0x0158 0x03e4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21		0x0158 0x03e4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24		0x0158 0x03e4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6		0x0158 0x03e4 0x0694 8 0
+#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17		0x015c 0x03e8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX		0x015c 0x03e8 0x0654 1 3
+#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX		0x015c 0x03e8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA17__CA7_MX6UL_TRACE_CTL	0x015c 0x03e8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA17__CSI_DATA00		0x015c 0x03e8 0x04d0 3 1
+#define MX6UL_PAD_LCD_DATA17__EIM_DATA09		0x015c 0x03e8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22		0x015c 0x03e8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25		0x015c 0x03e8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7		0x015c 0x03e8 0x0698 8 0
+#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18		0x0160 0x03ec 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA18__PWM5_OUT			0x0160 0x03ec 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO		0x0160 0x03ec 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA18__CSI_DATA10		0x0160 0x03ec 0x04ec 3 1
+#define MX6UL_PAD_LCD_DATA18__EIM_DATA10		0x0160 0x03ec 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23		0x0160 0x03ec 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26		0x0160 0x03ec 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD		0x0160 0x03ec 0x0678 8 1
+#define MX6UL_PAD_LCD_DATA19__EIM_DATA11		0x0164 0x03f0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24		0x0164 0x03f0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27		0x0164 0x03f0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK		0x0164 0x03f0 0x0670 8 1
+#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19		0x0164 0x03f0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA19__PWM6_OUT			0x0164 0x03f0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY		0x0164 0x03f0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA19__CSI_DATA11		0x0164 0x03f0 0x04f0 3 1
+#define MX6UL_PAD_LCD_DATA20__EIM_DATA12		0x0168 0x03f4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25		0x0168 0x03f4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28		0x0168 0x03f4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0		0x0168 0x03f4 0x067c 8 1
+#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20		0x0168 0x03f4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX		0x0168 0x03f4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX		0x0168 0x03f4 0x065c 1 2
+#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK		0x0168 0x03f4 0x0534 2 0
+#define MX6UL_PAD_LCD_DATA20__CSI_DATA12		0x0168 0x03f4 0x04f4 3 1
+#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21		0x016c 0x03f8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX		0x016c 0x03f8 0x065c 1 3
+#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX		0x016c 0x03f8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0		0x016c 0x03f8 0x0540 2 0
+#define MX6UL_PAD_LCD_DATA21__CSI_DATA13		0x016c 0x03f8 0x04f8 3 1
+#define MX6UL_PAD_LCD_DATA21__EIM_DATA13		0x016c 0x03f8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26		0x016c 0x03f8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29		0x016c 0x03f8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1		0x016c 0x03f8 0x0680 8 1
+#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22		0x0170 0x03fc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT			0x0170 0x03fc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI		0x0170 0x03fc 0x053c 2 0
+#define MX6UL_PAD_LCD_DATA22__CSI_DATA14		0x0170 0x03fc 0x04fc 3 1
+#define MX6UL_PAD_LCD_DATA22__EIM_DATA14		0x0170 0x03fc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27		0x0170 0x03fc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30		0x0170 0x03fc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2		0x0170 0x03fc 0x0684 8 0
+#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23		0x0174 0x0400 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA23__MQS_LEFT			0x0174 0x0400 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO		0x0174 0x0400 0x0538 2 0
+#define MX6UL_PAD_LCD_DATA23__CSI_DATA15		0x0174 0x0400 0x0500 3 1
+#define MX6UL_PAD_LCD_DATA23__EIM_DATA15		0x0174 0x0400 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28		0x0174 0x0400 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31		0x0174 0x0400 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3		0x0174 0x0400 0x0688 8 1
+#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B		0x0178 0x0404 0x0000 0 0
+#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK			0x0178 0x0404 0x0670 1 2
+#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK		0x0178 0x0404 0x0000 2 0
+#define MX6UL_PAD_NAND_RE_B__KPP_ROW00			0x0178 0x0404 0x05d0 3 1
+#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00			0x0178 0x0404 0x0000 4 0
+#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00			0x0178 0x0404 0x0000 5 0
+#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2			0x0178 0x0404 0x0000 8 0
+#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B		0x017c 0x0408 0x0000 0 0
+#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD			0x017c 0x0408 0x0678 1 2
+#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B		0x017c 0x0408 0x0000 2 0
+#define MX6UL_PAD_NAND_WE_B__KPP_COL00			0x017c 0x0408 0x05c4 3 1
+#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01			0x017c 0x0408 0x0000 4 0
+#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01			0x017c 0x0408 0x0000 5 0
+#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3			0x017c 0x0408 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00		0x0180 0x040c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0		0x0180 0x040c 0x067c 1 2
+#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B		0x0180 0x040c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA00__KPP_ROW01		0x0180 0x040c 0x05d4 3 1
+#define MX6UL_PAD_NAND_DATA00__EIM_AD08			0x0180 0x040c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02		0x0180 0x040c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY		0x0180 0x040c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01		0x0184 0x0410 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1		0x0184 0x0410 0x0680 1 2
+#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS		0x0184 0x0410 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA01__KPP_COL01		0x0184 0x0410 0x05c8 3 1
+#define MX6UL_PAD_NAND_DATA01__EIM_AD09			0x0184 0x0410 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03		0x0184 0x0410 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1		0x0184 0x0410 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02		0x0188 0x0414 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2		0x0188 0x0414 0x0684 1 1
+#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00		0x0188 0x0414 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA02__KPP_ROW02		0x0188 0x0414 0x05d8 3 1
+#define MX6UL_PAD_NAND_DATA02__EIM_AD10			0x0188 0x0414 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04		0x0188 0x0414 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2		0x0188 0x0414 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03		0x018c 0x0418 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3		0x018c 0x0418 0x0688 1 2
+#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01		0x018c 0x0418 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA03__KPP_COL02		0x018c 0x0418 0x05cc 3 1
+#define MX6UL_PAD_NAND_DATA03__EIM_AD11			0x018c 0x0418 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05		0x018c 0x0418 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3		0x018c 0x0418 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04		0x0190 0x041c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4		0x0190 0x041c 0x068c 1 1
+#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02		0x0190 0x041c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK		0x0190 0x041c 0x0564 3 1
+#define MX6UL_PAD_NAND_DATA04__EIM_AD12			0x0190 0x041c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06		0x0190 0x041c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX		0x0190 0x041c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX		0x0190 0x041c 0x062c 8 2
+#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05		0x0194 0x0420 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5		0x0194 0x0420 0x0690 1 1
+#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03		0x0194 0x0420 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI		0x0194 0x0420 0x056c 3 1
+#define MX6UL_PAD_NAND_DATA05__EIM_AD13			0x0194 0x0420 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07		0x0194 0x0420 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX		0x0194 0x0420 0x062c 8 3
+#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX		0x0194 0x0420 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06		0x0198 0x0424 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6		0x0198 0x0424 0x0694 1 1
+#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK		0x0198 0x0424 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO		0x0198 0x0424 0x0568 3 1
+#define MX6UL_PAD_NAND_DATA06__EIM_AD14			0x0198 0x0424 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08		0x0198 0x0424 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS		0x0198 0x0424 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS		0x0198 0x0424 0x0628 8 4
+#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07		0x019c 0x0428 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7		0x019c 0x0428 0x0698 1 1
+#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B		0x019c 0x0428 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0		0x019c 0x0428 0x0570 3 1
+#define MX6UL_PAD_NAND_DATA07__EIM_AD15			0x019c 0x0428 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09		0x019c 0x0428 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS		0x019c 0x0428 0x0628 8 5
+#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS		0x019c 0x0428 0x0000 8 0
+#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE			0x01a0 0x042c 0x0000 0 0
+#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B		0x01a0 0x042c 0x0000 1 0
+#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS			0x01a0 0x042c 0x0000 2 0
+#define MX6UL_PAD_NAND_ALE__PWM3_OUT			0x01a0 0x042c 0x0000 3 0
+#define MX6UL_PAD_NAND_ALE__EIM_ADDR17			0x01a0 0x042c 0x0000 4 0
+#define MX6UL_PAD_NAND_ALE__GPIO4_IO10			0x01a0 0x042c 0x0000 5 0
+#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1			0x01a0 0x042c 0x0000 8 0
+#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B		0x01a4 0x0430 0x0000 0 0
+#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B		0x01a4 0x0430 0x0000 1 0
+#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK		0x01a4 0x0430 0x0000 2 0
+#define MX6UL_PAD_NAND_WP_B__PWM4_OUT			0x01a4 0x0430 0x0000 3 0
+#define MX6UL_PAD_NAND_WP_B__EIM_BCLK			0x01a4 0x0430 0x0000 4 0
+#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11			0x01a4 0x0430 0x0000 5 0
+#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY			0x01a4 0x0430 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B		0x01a8 0x0434 0x0000 0 0
+#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4		0x01a8 0x0434 0x0000 1 0
+#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00		0x01a8 0x0434 0x0000 2 0
+#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0		0x01a8 0x0434 0x0560 3 1
+#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B		0x01a8 0x0434 0x0000 4 0
+#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12		0x01a8 0x0434 0x0000 5 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX		0x01a8 0x0434 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX		0x01a8 0x0434 0x0634 8 2
+#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B		0x01ac 0x0438 0x0000 0 0
+#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5		0x01ac 0x0438 0x0000 1 0
+#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01		0x01ac 0x0438 0x0000 2 0
+#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK		0x01ac 0x0438 0x0554 3 1
+#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B		0x01ac 0x0438 0x0000 4 0
+#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13		0x01ac 0x0438 0x0000 5 0
+#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX		0x01ac 0x0438 0x0634 8 3
+#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX		0x01ac 0x0438 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B		0x01b0 0x043c 0x0000 0 0
+#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6		0x01b0 0x043c 0x0000 1 0
+#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02		0x01b0 0x043c 0x0000 2 0
+#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI		0x01b0 0x043c 0x055c 3 1
+#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18		0x01b0 0x043c 0x0000 4 0
+#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14		0x01b0 0x043c 0x0000 5 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS		0x01b0 0x043c 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS		0x01b0 0x043c 0x0630 8 2
+#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE			0x01b4 0x0440 0x0000 0 0
+#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7		0x01b4 0x0440 0x0000 1 0
+#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03		0x01b4 0x0440 0x0000 2 0
+#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO			0x01b4 0x0440 0x0558 3 1
+#define MX6UL_PAD_NAND_CLE__EIM_ADDR16			0x01b4 0x0440 0x0000 4 0
+#define MX6UL_PAD_NAND_CLE__GPIO4_IO15			0x01b4 0x0440 0x0000 5 0
+#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS		0x01b4 0x0440 0x0630 8 3
+#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS		0x01b4 0x0440 0x0000 8 0
+#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS			0x01b8 0x0444 0x0000 0 0
+#define MX6UL_PAD_NAND_DQS__CSI_FIELD			0x01b8 0x0444 0x0530 1 1
+#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B		0x01b8 0x0444 0x0000 2 0
+#define MX6UL_PAD_NAND_DQS__PWM5_OUT			0x01b8 0x0444 0x0000 3 0
+#define MX6UL_PAD_NAND_DQS__EIM_WAIT			0x01b8 0x0444 0x0000 4 0
+#define MX6UL_PAD_NAND_DQS__GPIO4_IO16			0x01b8 0x0444 0x0000 5 0
+#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01		0x01b8 0x0444 0x0614 6 1
+#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK		0x01b8 0x0444 0x061c 8 1
+#define MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x01bc 0x0448 0x0000 0 0
+#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1		0x01bc 0x0448 0x0000 1 0
+#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC			0x01bc 0x0448 0x0000 2 0
+#define MX6UL_PAD_SD1_CMD__SPDIF_OUT			0x01bc 0x0448 0x0000 3 0
+#define MX6UL_PAD_SD1_CMD__EIM_ADDR19			0x01bc 0x0448 0x0000 4 0
+#define MX6UL_PAD_SD1_CMD__GPIO2_IO16			0x01bc 0x0448 0x0000 5 0
+#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00		0x01bc 0x0448 0x0610 6 2
+#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR			0x01bc 0x0448 0x0000 8 0
+#define MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x01c0 0x044c 0x0000 0 0
+#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2		0x01c0 0x044c 0x0000 1 0
+#define MX6UL_PAD_SD1_CLK__SAI2_MCLK			0x01c0 0x044c 0x05f0 2 1
+#define MX6UL_PAD_SD1_CLK__SPDIF_IN			0x01c0 0x044c 0x0618 3 3
+#define MX6UL_PAD_SD1_CLK__EIM_ADDR20			0x01c0 0x044c 0x0000 4 0
+#define MX6UL_PAD_SD1_CLK__GPIO2_IO17			0x01c0 0x044c 0x0000 5 0
+#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC			0x01c0 0x044c 0x0664 8 2
+#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x01c4 0x0450 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3		0x01c4 0x0450 0x0000 1 0
+#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC		0x01c4 0x0450 0x05fc 2 1
+#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX		0x01c4 0x0450 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21			0x01c4 0x0450 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18			0x01c4 0x0450 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID		0x01c4 0x0450 0x04b8 8 2
+#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x01c8 0x0454 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA1__GPT2_CLK			0x01c8 0x0454 0x05a0 1 1
+#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK		0x01c8 0x0454 0x05f8 2 1
+#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX		0x01c8 0x0454 0x0584 3 3
+#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22			0x01c8 0x0454 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19			0x01c8 0x0454 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR		0x01c8 0x0454 0x0000 8 0
+#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x01cc 0x0458 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1		0x01cc 0x0458 0x0598 1 1
+#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA		0x01cc 0x0458 0x05f4 2 1
+#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX		0x01cc 0x0458 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23			0x01cc 0x0458 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20			0x01cc 0x0458 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1			0x01cc 0x0458 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC		0x01cc 0x0458 0x0660 8 2
+#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x01d0 0x045c 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2		0x01d0 0x045c 0x059c 1 1
+#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA		0x01d0 0x045c 0x0000 2 0
+#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX		0x01d0 0x045c 0x0588 3 3
+#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24			0x01d0 0x045c 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21			0x01d0 0x045c 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2			0x01d0 0x045c 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID		0x01d0 0x045c 0x04bc 8 2
+#define MX6UL_PAD_CSI_MCLK__CSI_MCLK			0x01d4 0x0460 0x0000 0 0
+#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B			0x01d4 0x0460 0x0674 1 0
+#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B		0x01d4 0x0460 0x0000 2 0
+#define MX6UL_PAD_CSI_MCLK__I2C1_SDA			0x01d4 0x0460 0x05a8 3 0
+#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B			0x01d4 0x0460 0x0000 4 0
+#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17			0x01d4 0x0460 0x0000 5 0
+#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL		0x01d4 0x0460 0x0000 6 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX		0x01d4 0x0460 0x0000 8 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX		0x01d4 0x0460 0x064c 8 0
+#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK		0x01d8 0x0464 0x0528 0 1
+#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP			0x01d8 0x0464 0x069c 1 2
+#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B		0x01d8 0x0464 0x0000 2 0
+#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL			0x01d8 0x0464 0x05a4 3 2
+#define MX6UL_PAD_CSI_PIXCLK__EIM_OE			0x01d8 0x0464 0x0000 4 0
+#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18		0x01d8 0x0464 0x0000 5 0
+#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5		0x01d8 0x0464 0x0000 6 0
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX		0x01d8 0x0464 0x064c 8 3
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX		0x01d8 0x0464 0x0000 8 0
+#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC			0x01dc 0x0468 0x052c 0 0
+#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK			0x01dc 0x0468 0x0670 1 0
+#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK		0x01dc 0x0468 0x0000 2 0
+#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA			0x01dc 0x0468 0x05b0 3 0
+#define MX6UL_PAD_CSI_VSYNC__EIM_RW			0x01dc 0x0468 0x0000 4 0
+#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19			0x01dc 0x0468 0x0000 5 0
+#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT			0x01dc 0x0468 0x0000 6 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS		0x01dc 0x0468 0x0648 8 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS		0x01dc 0x0468 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC			0x01e0 0x046c 0x0524 0 0
+#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD			0x01e0 0x046c 0x0678 1 0
+#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD		0x01e0 0x046c 0x0000 2 0
+#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL			0x01e0 0x046c 0x05ac 3 0
+#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B			0x01e0 0x046c 0x0000 4 0
+#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20			0x01e0 0x046c 0x0000 5 0
+#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT			0x01e0 0x046c 0x0000 6 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS		0x01e0 0x046c 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS		0x01e0 0x046c 0x0648 8 1
+#define MX6UL_PAD_CSI_DATA00__CSI_DATA02		0x01e4 0x0470 0x04c4 0 0
+#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0		0x01e4 0x0470 0x067c 1 0
+#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B		0x01e4 0x0470 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK		0x01e4 0x0470 0x0544 3 0
+#define MX6UL_PAD_CSI_DATA00__EIM_AD00			0x01e4 0x0470 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21		0x01e4 0x0470 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT		0x01e4 0x0470 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX		0x01e4 0x0470 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX		0x01e4 0x0470 0x0644 8 0
+#define MX6UL_PAD_CSI_DATA01__CSI_DATA03		0x01e8 0x0474 0x04c8 0 0
+#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1		0x01e8 0x0474 0x0680 1 0
+#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN		0x01e8 0x0474 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0		0x01e8 0x0474 0x0550 3 0
+#define MX6UL_PAD_CSI_DATA01__EIM_AD01			0x01e8 0x0474 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22		0x01e8 0x0474 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK			0x01e8 0x0474 0x05e0 6 0
+#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX		0x01e8 0x0474 0x0644 8 1
+#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX		0x01e8 0x0474 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA02__CSI_DATA04		0x01ec 0x0478 0x04d8 0 1
+#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2		0x01ec 0x0478 0x0684 1 2
+#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD		0x01ec 0x0478 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI		0x01ec 0x0478 0x054c 3 1
+#define MX6UL_PAD_CSI_DATA02__EIM_AD02			0x01ec 0x0478 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x01ec 0x0478 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC		0x01ec 0x0478 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS		0x01ec 0x0478 0x0640 8 5
+#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS		0x01ec 0x0478 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__CSI_DATA05		0x01f0 0x047c 0x04cc 0 0
+#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3		0x01f0 0x047c 0x0688 1 0
+#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0x01f0 0x047c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO		0x01f0 0x047c 0x0548 3 0
+#define MX6UL_PAD_CSI_DATA03__EIM_AD03			0x01f0 0x047c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24		0x01f0 0x047c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK		0x01f0 0x047c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS		0x01f0 0x047c 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS		0x01f0 0x047c 0x0640 8 0
+#define MX6UL_PAD_CSI_DATA04__CSI_DATA06		0x01f4 0x0480 0x04dc 0 1
+#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4		0x01f4 0x0480 0x068c 1 2
+#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x01f4 0x0480 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK		0x01f4 0x0480 0x0534 3 1
+#define MX6UL_PAD_CSI_DATA04__EIM_AD04			0x01f4 0x0480 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25		0x01f4 0x0480 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC		0x01f4 0x0480 0x05ec 6 1
+#define MX6UL_PAD_CSI_DATA04__USDHC1_WP			0x01f4 0x0480 0x066c 8 2
+#define MX6UL_PAD_CSI_DATA05__CSI_DATA07		0x01f8 0x0484 0x04e0 0 1
+#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5		0x01f8 0x0484 0x0690 1 2
+#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0x01f8 0x0484 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0		0x01f8 0x0484 0x0540 3 1
+#define MX6UL_PAD_CSI_DATA05__EIM_AD05			0x01f8 0x0484 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26		0x01f8 0x0484 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK		0x01f8 0x0484 0x05e8 6 1
+#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B		0x01f8 0x0484 0x0668 8 2
+#define MX6UL_PAD_CSI_DATA06__CSI_DATA08		0x01fc 0x0488 0x04e4 0 1
+#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6		0x01fc 0x0488 0x0694 1 2
+#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0x01fc 0x0488 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI		0x01fc 0x0488 0x053c 3 1
+#define MX6UL_PAD_CSI_DATA06__EIM_AD06			0x01fc 0x0488 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27		0x01fc 0x0488 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA		0x01fc 0x0488 0x05e4 6 1
+#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B		0x01fc 0x0488 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA07__CSI_DATA09		0x0200 0x048c 0x04e8 0 1
+#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7		0x0200 0x048c 0x0698 1 2
+#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0x0200 0x048c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO		0x0200 0x048c 0x0538 3 1
+#define MX6UL_PAD_CSI_DATA07__EIM_AD07			0x0200 0x048c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28		0x0200 0x048c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA		0x0200 0x048c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT		0x0200 0x048c 0x0000 8 0
+
+#endif /* __DTS_IMX6UL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-prti6g.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-prti6g.dts
new file mode 100644
index 0000000000000..c3c50f51a5a86
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-prti6g.dts
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Protonic PRTI6G Board";
+	compatible = "prt,prti6g", "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	clock_ksz8081_in: clock-ksz8081-in {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clock_ksz8081_out: clock-ksz8081-out {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet1_ref_pad";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			label = "debug0";
+			gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v2: regulator-3v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v2";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&clock_ksz8081_out>;
+	clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "enet1_ref_pad";
+	assigned-clocks = <&clks IMX6UL_CLK_ENET1_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081_out>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eth1>;
+	phy-mode = "rmii";
+	phy-handle = <&rmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+			clocks = <&clock_ksz8081_in>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3v2>;
+	no-1-8-v;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX		0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX		0x0b0b0
+			/* SR */
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03		0x0b0b0
+			/* TERM */
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04		0x0b0b0
+			/* nSMBALERT */
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02		0x0b0b0
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX		0x0b0b0
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX		0x0b0b0
+			/* SR */
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05		0x0b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK		0x0b0b0
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26		0x000b1
+			MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI		0x0b0b0
+			MX6UL_PAD_CSI_DATA07__ECSPI1_MISO		0x0b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK		0x0b0b0
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22		0x000b1
+			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI		0x0b0b0
+			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO		0x0b0b0
+		>;
+	};
+
+	pinctrl_eth1: eth1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC			0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO		0x100b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00		0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01		0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN		0x100b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER		0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN		0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00		0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01		0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1		0x1b000
+			/* PHY ENET1_RST */
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00		0x00880
+			/* PHY ENET1_IRQ */
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01		0x00880
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* HW revision detect */
+			/* REV_ID0 */
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08		0x1b0b0
+			/* REV_ID1 */
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09		0x1b0b0
+			/* REV_ID2 */
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10		0x1b0b0
+			/* REV_ID3 */
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11		0x1b0b0
+			/* BOARD_ID0 */
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13		0x1b0b0
+			/* BOARD_ID1 */
+			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14		0x1b0b0
+			/* BOARD_ID2 */
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15		0x1b0b0
+			/* BOARD_ID3 */
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12		0x1b0b0
+			/* Safety controller IO */
+			/* WAKE_SC */
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06		0x1b0b0
+			/* PROGRAM_SC */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__I2C2_SDA		0x4001b8b0
+			MX6UL_PAD_CSI_HSYNC__I2C2_SCL		0x4001b8b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__GPIO4_IO16			0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX		0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x070b1
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x07099
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x070b1
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x070b1
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x070b1
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x070b1
+			/* SD1 CD */
+			MX6UL_PAD_NAND_READY_B__GPIO4_IO12		0x170b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD			0x170f9
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK			0x100f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0		0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1		0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2		0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3		0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4		0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5		0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6		0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7		0x170f9
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B		0x170b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi
new file mode 100644
index 0000000000000..57e647fc32374
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULx
+ * - TQMa6ULxL
+ * - TQMa6ULLx
+ * - TQMa6ULLxL
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_recovery>;
+	scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pfuze3000: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			reg_sw1a: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <6250>;
+				/* not used */
+			};
+
+			reg_sw1b_core: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			reg_sw2: sw2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_sw3_ddr: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_swbst: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				/* not used */
+			};
+
+			reg_snvs_3v0: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vrefddr: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vccsd: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_v33_3v3: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vldo1_3v3: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				/* not used */
+			};
+
+			reg_vldo2: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				/* not used */
+			};
+
+			reg_vldo3: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				/* not used */
+			};
+
+			reg_vldo4: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	jc42_1a: eeprom-temperature@1a {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1a>;
+	};
+
+	m24c64_50: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	m24c02_52: eeprom@52 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+		read-only;
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic>;
+
+	/*
+	 * PMIC & temperature sensor IRQ
+	 * Both do currently not use IRQ
+	 * potentially dangerous if used on baseboard
+	 */
+	pmic-int-hog {
+		gpio-hog;
+		gpios = <24 0>;
+		input;
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <33000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
+/* eMMC */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz" , "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+
+	bus-width = <8>;
+	disable-wp;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001b8b0
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c4_recovery: i2c4recoverygrp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x4001b8b0
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21	0x4001b8b0
+		>;
+	};
+
+	pinctrl_pmic: pmic {
+		fsl,pins = <
+			/* PMIC irq */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x1b099
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts
new file mode 100644
index 0000000000000..f2a5f17f312e5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul1.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board";
+	compatible = "tq,imx6ul-tqma6ul1-mba6ulx", "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
+};
+
+/*
+ * Note: can2 and fec2 are enabled on mba6ulx level (for i.MX6ULG2 usage)
+ * and need to be disabled here again
+ */
+&can2 {
+	status = "disabled";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_mdc>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <0>;
+		};
+	};
+};
+
+&fec2 {
+	/delete-property/ phy-handle;
+	/delete-node/ mdio;
+};
+
+&iomuxc {
+	pinctrl_enet1_mdc: enet1mdcgrp {
+		fsl,pins = <
+			/* mdio */
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi
new file mode 100644
index 0000000000000..24192d012ef7e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul-tqma6ul2.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL1 SoM";
+	compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
+};
+
+/*
+ * There are no module specific differences compared to TQMa6UL2,
+ * only external interfaces differ
+ */
+
+/*
+ * Devices not available on i.MX6ULG1 and should not be enabled on
+ * mainboard level (again)
+ */
+&can2 {
+	status = "disabled";
+};
+
+&csi {
+	status = "disabled";
+};
+
+&fec2 {
+	status = "disabled";
+};
+
+&lcdif {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx.dts
new file mode 100644
index 0000000000000..0757df2b8f483
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul2.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6ULx SoM on MBa6ULx board";
+	compatible = "tq,imx6ul-tqma6ul2-mba6ulx", "tq,imx6ul-tqma6ul2", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2.dtsi
new file mode 100644
index 0000000000000..e2e95dd92263e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulx-common.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL2 SoM";
+	compatible = "tq,imx6ul-tqma6ul2", "fsl,imx6ul";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017051
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017051
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017051
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017051
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017051
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017051
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017051
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017051
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017051
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017051
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170e1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170e1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170e1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170e1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170e1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170e1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170e1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170e1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170e1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170e1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dts
new file mode 100644
index 0000000000000..9d9b6b744a1c0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul2l.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ Systems TQMa6UL2L SoM on MBa6ULx board";
+	compatible = "tq,imx6ul-tqma6ul2l-mba6ulx", "tq,imx6ul-tqma6ul2l", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l.dtsi
new file mode 100644
index 0000000000000..4b87e2dc70dcd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulxl-common.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL2L SoM";
+	compatible = "tq,imx6ul-tqma6ul2l", "fsl,imx6ul";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017051
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017051
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017051
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017051
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017051
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017051
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017051
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017051
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017051
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017051
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170e1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulx-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulx-common.dtsi
new file mode 100644
index 0000000000000..5afb9046c202a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulx-common.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULx
+ * - TQMa6ULLx
+ */
+
+&m24c64_50 {
+	vcc-supply = <&reg_sw2>;
+};
+
+&m24c02_52 {
+	vcc-supply = <&reg_sw2>;
+};
+
+&reg_sw2 {
+	regulator-boot-on;
+	regulator-always-on;
+};
+
+/* eMMC */
+&usdhc2 {
+	vmmc-supply = <&reg_sw2>;
+	vqmmc-supply = <&reg_vldo4>;
+};
+
+&iomuxc {
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70b9
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70b9
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70b9
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70b9
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70b9
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulxl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulxl-common.dtsi
new file mode 100644
index 0000000000000..ba84a4f70ebde
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulxl-common.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULxL
+ * - TQMa6ULLxL
+ */
+
+/ {
+	reg_vin: reg-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&m24c64_50 {
+	vcc-supply = <&reg_vin>;
+};
+
+&m24c02_52 {
+	vcc-supply = <&reg_vin>;
+};
+
+/* eMMC */
+&usdhc2 {
+	vmmc-supply = <&reg_vin>;
+	vqmmc-supply = <&reg_vldo4>;
+};
+
+&iomuxc {
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70a9
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a9
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70a9
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70a9
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70a9
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts
new file mode 100644
index 0000000000000..8c2f3df79b47f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0010 Module";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		/delete-property/ mmc1;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts
new file mode 100644
index 0000000000000..d82698e7d50fb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0011 Module";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc1;
+	};
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	fsl,wp-controller;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts
new file mode 100644
index 0000000000000..92ac0edcb6080
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		lcdif-24bit-pins-a = &pinctrl_disp0_3;
+		mmc0 = &usdhc1;
+		/delete-property/ mmc1;
+		serial2 = &uart3;
+		serial4 = &uart5;
+	};
+	/delete-node/ sound;
+};
+
+&can1 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&fec1 {
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
+	/delete-node/ mdio;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_3v3_etn>;
+	phy-handle = <&etnphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		etnphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy0_int>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+
+		etnphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy1_int>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+	};
+};
+
+&i2c_gpio {
+	status = "disabled";
+};
+
+&i2c2 {
+	/delete-node/ codec@a;
+	/delete-node/ touchscreen@48;
+
+	rtc: rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcdif {
+	pinctrl-0 = <&pinctrl_disp0_3>;
+};
+
+&reg_usbotg_vbus{
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	/delete-property/ cd-gpios;
+	cap-sdio-irq;
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	/delete-property/ uart-has-rtscts;
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	/delete-property/ uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "disabled"; /* conflicts with LCDIF */
+};
+
+&iomuxc {
+	hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x0b0b0 /* WLAN_RESET */
+		>;
+	};
+
+	pinctrl_disp0_3: disp0grp-3 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
+			/* LCD_DATA08..09 not wired */
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
+			/* LCD_DATA16..17 not wired */
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x0b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x0b0b0
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__UART8_DCE_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA21__UART8_DCE_RX	0x0b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
new file mode 100644
index 0000000000000..6bd90473050b0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
@@ -0,0 +1,947 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		can0 = &can2;
+		can1 = &can1;
+		display = &display;
+		i2c0 = &i2c2;
+		i2c1 = &i2c_gpio;
+		i2c2 = &i2c1;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		lcdif-23bit-pins-a = &pinctrl_disp0_1;
+		lcdif-24bit-pins-a = &pinctrl_disp0_2;
+		pwm0 = &pwm5;
+		reg-can-xcvr = &reg_can_xcvr;
+		serial2 = &uart5;
+		serial4 = &uart3;
+		spi0 = &ecspi2;
+		spi1 = &spi_gpio;
+		stk5led = &user_led;
+		usbh1 = &usbotg2;
+		usbotg = &usbotg1;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>; /* will be filled by U-Boot */
+	};
+
+	clocks {
+		mclk: mclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_rst>;
+		enable-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm5 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_lcd_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	i2c_gpio: i2c-gpio {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio>;
+		gpios = <
+			&gpio5 1 GPIO_ACTIVE_HIGH /* SDA */
+			&gpio5 0 GPIO_ACTIVE_HIGH /* SCL */
+		>;
+		clock-frequency = <400000>;
+		status = "okay";
+
+		ds1339: rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+			status = "disabled";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led: led-user {
+			label = "Heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led>;
+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3_etn: regulator-3v3etn {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_ETN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_etnphy_power>;
+		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can_xcvr: regulator-canxcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan_xcvr>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_lcd_pwr: regulator-lcdpwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_pwr>;
+		gpio = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus &pinctrl_usbh1_oc>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus &pinctrl_usbotg_oc>;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	spi_gpio: spi {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi_gpio>;
+		mosi-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <2>;
+		cs-gpios = <
+			&gpio1 29 GPIO_ACTIVE_HIGH
+			&gpio1 10 GPIO_ACTIVE_HIGH
+		>;
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "karo,imx6ul-tx6ul-sgtl5000",
+			     "simple-audio-card";
+		simple-audio-card,name = "imx6ul-tx6ul-sgtl5000-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <
+		&gpio1 29 GPIO_ACTIVE_HIGH
+		&gpio1 10 GPIO_ACTIVE_HIGH
+	>;
+	status = "disabled";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_3v3_etn>;
+	phy-handle = <&etnphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		etnphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy0_int>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+
+		etnphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy1_int>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_3v3_etn>;
+	phy-handle = <&etnphy1>;
+	status = "disabled";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	fsl,no-blockmark-swap;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	polytouch: polytouch@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	touchscreen: touchscreen@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_NONE>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <660>;
+		wakeup-source;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	/* sample keymap */
+	/* row/col 0..3 are mapped to KPP row/col 4..7 */
+	linux,keymap = <
+		MATRIX_KEY(4, 4, KEY_POWER)
+		MATRIX_KEY(4, 5, KEY_KP0)
+		MATRIX_KEY(4, 6, KEY_KP1)
+		MATRIX_KEY(4, 7, KEY_KP2)
+		MATRIX_KEY(5, 4, KEY_KP3)
+		MATRIX_KEY(5, 5, KEY_KP4)
+		MATRIX_KEY(5, 6, KEY_KP5)
+		MATRIX_KEY(5, 7, KEY_KP6)
+		MATRIX_KEY(6, 4, KEY_KP7)
+		MATRIX_KEY(6, 5, KEY_KP8)
+		MATRIX_KEY(6, 6, KEY_KP9)
+	>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_disp0_1>;
+	lcd-supply = <&reg_lcd_pwr>;
+	display = <&display>;
+	status = "okay";
+
+	display: disp0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+		status = "okay";
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5 &pinctrl_uart5_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usbotg_vbus>;
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>;
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x0b0b0 /* LED */
+		>;
+	};
+
+	pinctrl_disp0_1: disp0grp-1 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
+			/* PAD DISP0_DAT0 is used for the Flexcan transceiver control on STK5-v5 */
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x10
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x10
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x10
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x10
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x10
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
+		>;
+	};
+
+	pinctrl_disp0_2: disp0grp-2 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x10
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x10
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x10
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x10
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x10
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x10
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x0b0b0 /* CSPI_SS */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x0b0b0 /* CSPI_SS */
+			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI	0x0b0b0 /* CSPI_MOSI */
+			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO	0x0b0b0 /* CSPI_MISO */
+			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK	0x0b0b0 /* CSPI_SCLK */
+		>;
+	};
+
+	pinctrl_edt_ft5x06: edt-ft5x06grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0 /* Interrupt */
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0 /* Reset */
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Wake */
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x000b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x000b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x000b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x000b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x000b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x000b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x000b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x400000b1
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x000b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x000b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x000b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x000b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x000b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x000b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x000b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x400000b1
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x0b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_etnphy_power: etnphy-pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x0b0b0 /* ETN PHY POWER */
+		>;
+	};
+
+	pinctrl_etnphy0_int: etnphy-intgrp-0 {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0 /* ETN PHY INT */
+		>;
+	};
+
+	pinctrl_etnphy0_rst: etnphy-rstgrp-0 {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0 /* ETN PHY RESET */
+		>;
+	};
+
+	pinctrl_etnphy1_int: etnphy-intgrp-1 {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x0b0b0 /* ETN PHY INT */
+		>;
+	};
+
+	pinctrl_etnphy1_rst: etnphy-rstgrp-1 {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x0b0b0 /* ETN PHY RESET */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x0b0b0
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0x0b0b0 /* Flexcan XCVR enable */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_i2c_gpio: i2c-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x4001b8b1 /* I2C SCL */
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x4001b8b1 /* I2C SDA */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL		0x4001b8b1
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_kpp: kppgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__KPP_COL06	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__KPP_COL07	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__KPP_ROW05	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07	0x1b0b0
+		>;
+	};
+
+	pinctrl_lcd_pwr: lcd-pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0 /* LCD Power Enable */
+		>;
+	};
+
+	pinctrl_lcd_rst: lcd-rstgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04	0x0b0b0 /* LCD Reset */
+		>;
+	};
+
+	pinctrl_pwm5: pwm5grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__PWM5_OUT		0x0b0b0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x0b0b0 /* SSI1_RXD */
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x0b0b0 /* SSI1_TXD */
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x0b0b0 /* SSI1_CLK */
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x0b0b0 /* SSI1_FS */
+		>;
+	};
+
+	pinctrl_spi_gpio: spi-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x0b0b0 /* CSPI_SS */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x0b0b0 /* CSPI_SS */
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x0b0b0 /* CSPI_MOSI */
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x0b0b0 /* CSPI_MISO */
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x0b0b0 /* CSPI_SCLK */
+		>;
+	};
+
+	pinctrl_tsc2007: tsc2007grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x1b0b0 /* Interrupt */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart1_rtscts: uart1-rtsctsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS	0x0b0b0
+			MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart2_rtscts: uart2-rtsctsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x0b0b0
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX	0x0b0b0
+			MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart5_rtscts: uart5-rtsctsgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x0b0b0
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x0b0b0
+		>;
+	};
+
+	pinctrl_usbh1_oc: usbh1-ocgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x17059 /* USBH1_OC */
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x0b0b0 /* USBH1_VBUSEN */
+		>;
+	};
+
+	pinctrl_usbotg_oc: usbotg-ocgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x17059 /* USBOTG_OC */
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbusgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x1b0b0 /* USBOTG_VBUSEN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x070b1
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x07099
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x070b1
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x070b1
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x070b1
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x070b1
+		>;
+	};
+
+	pinctrl_usdhc1_cd: usdhc1cdgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x170b0 /* SD1 CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x070b1
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x070b1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x070b1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x070b1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x070b1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x070b1
+			/* eMMC RESET */
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x170b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
new file mode 100644
index 0000000000000..0174f3edbd162
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
@@ -0,0 +1,1124 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6ul-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		sai1 = &sai1;
+		sai2 = &sai2;
+		sai3 = &sai3;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <696000000>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			operating-points =
+				/* kHz	uV */
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1025000>,
+				<198000	950000>;
+			fsl,soc-operating-points =
+				/* KHz	uV */
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1175000>,
+				<198000	1175000>;
+			clocks = <&clks IMX6UL_CLK_ARM>,
+				 <&clks IMX6UL_CLK_PLL2_BUS>,
+				 <&clks IMX6UL_CLK_PLL2_PFD2>,
+				 <&clks IMX6UL_CA7_SECONDARY_SEL>,
+				 <&clks IMX6UL_CLK_STEP>,
+				 <&clks IMX6UL_CLK_PLL1_SW>,
+				 <&clks IMX6UL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
+				      "secondary_sel", "step", "pll1_sw",
+				      "pll1_sys";
+			arm-supply = <&reg_arm>;
+			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+		status = "disabled";
+	};
+
+	ckil: clock-cli {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a02000 0x2000>,
+			      <0x00a04000 0x2000>,
+			      <0x00a06000 0x2000>;
+		};
+
+		dma_apbh: dma-controller@1804000 {
+			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x01804000 0x2000>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6UL_CLK_APBHDMA>;
+		};
+
+		gpmi: nand-controller@1806000 {
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6UL_CLK_GPMI_IO>,
+				 <&clks IMX6UL_CLK_GPMI_APB>,
+				 <&clks IMX6UL_CLK_GPMI_BCH>,
+				 <&clks IMX6UL_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6UL_CLK_PER_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		aips1: bus@2000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				ecspi1: spi@2008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI1>,
+						 <&clks IMX6UL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI2>,
+						 <&clks IMX6UL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI3>,
+						 <&clks IMX6UL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI4>,
+						 <&clks IMX6UL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart7: serial@2018000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART7_IPG>,
+						 <&clks IMX6UL_CLK_UART7_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART1_IPG>,
+						 <&clks IMX6UL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart8: serial@2024000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+						 <&clks IMX6UL_CLK_UART8_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				sai1: sai@2028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
+						 <&clks IMX6UL_CLK_SAI1>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 35 24 0>,
+					       <&sdma 36 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai2: sai@202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
+						 <&clks IMX6UL_CLK_SAI2>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 37 24 0>,
+					       <&sdma 38 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai3: sai@2030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
+						 <&clks IMX6UL_CLK_SAI3>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 39 24 0>,
+					       <&sdma 40 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				asrc: asrc@2034000 {
+					compatible = "fsl,imx6ul-asrc", "fsl,imx53-asrc";
+					reg = <0x2034000 0x4000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
+						<&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>,
+						<&clks IMX6UL_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "spba";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+					dma-names = "rxa", "rxb", "rxc",
+						    "txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
+					status = "okay";
+				};
+			};
+
+			tsc: tsc@2040000 {
+				compatible = "fsl,imx6ul-tsc";
+				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_IPG>,
+					 <&clks IMX6UL_CLK_ADC2>;
+				clock-names = "tsc", "adc";
+				status = "disabled";
+			};
+
+			pwm1: pwm@2080000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM1>,
+					 <&clks IMX6UL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@2084000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM2>,
+					 <&clks IMX6UL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@2088000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM3>,
+					 <&clks IMX6UL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@208c000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM4>,
+					 <&clks IMX6UL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			can1: can@2090000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
+					 <&clks IMX6UL_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 1>;
+				status = "disabled";
+			};
+
+			can2: can@2094000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
+					 <&clks IMX6UL_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 2>;
+				status = "disabled";
+			};
+
+			gpt1: timer@2098000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
+					 <&clks IMX6UL_CLK_GPT1_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 23 10>, <&iomuxc 10 17 6>,
+					      <&iomuxc 16 33 16>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 65 29>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO5>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
+			};
+
+			fec2: ethernet@20b4000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x020b4000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET2_REF_SEL>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref";
+				fsl,num-tx-queues = <1>;
+				fsl,num-rx-queues = <1>;
+				fsl,stop-mode = <&gpr 0x10 4>;
+				fsl,magic-packet;
+				status = "disabled";
+			};
+
+			kpp: keypad@20b8000 {
+				compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@20bc000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG1>;
+			};
+
+			wdog2: watchdog@20c0000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: clock-controller@20c4000 {
+				compatible = "fsl,imx6ul-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
+					     "syscon", "simple-mfd";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_3p0: regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "cpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+				};
+			};
+
+			usbphy1: usbphy@20c9000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@20ca000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx6ul-snvs-lpgpr";
+				};
+			};
+
+			epit1: epit@20d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@20d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: reset-controller@20d8000 {
+				compatible = "fsl,imx6ul-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@20dc000 {
+				compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6UL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+
+			iomuxc: pinctrl@20e0000 {
+				compatible = "fsl,imx6ul-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@20e4000 {
+				compatible = "fsl,imx6ul-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			gpt2: timer@20e8000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
+					 <&clks IMX6UL_CLK_GPT2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@20ec000 {
+				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
+					     "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_IPG>,
+					 <&clks IMX6UL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pwm5: pwm@20f0000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f0000 0x4000>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM5>,
+					 <&clks IMX6UL_CLK_PWM5>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm6: pwm@20f4000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f4000 0x4000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM6>,
+					 <&clks IMX6UL_CLK_PWM6>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm7: pwm@20f8000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM7>,
+					 <&clks IMX6UL_CLK_PWM7>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm8: pwm@20fc000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM8>,
+					 <&clks IMX6UL_CLK_PWM8>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		aips2: bus@2100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			crypto: crypto@2140000 {
+				compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x2140000 0x3c000>;
+				ranges = <0 0x2140000 0x3c000>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAAM_IPG>, <&clks IMX6UL_CLK_CAAM_ACLK>,
+					 <&clks IMX6UL_CLK_CAAM_MEM>;
+				clock-names = "ipg", "aclk", "mem";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			usbotg1: usb@2184000 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@2184200 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			fec1: ethernet@2188000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET1_REF_SEL>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref";
+				fsl,num-tx-queues = <1>;
+				fsl,num-rx-queues = <1>;
+				fsl,stop-mode = <&gpr 0x10 3>;
+				fsl,magic-packet;
+				status = "disabled";
+			};
+
+			usdhc1: mmc@2190000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@2194000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			adc1: adc@2198000 {
+				compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ADC1>;
+				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			memory-controller@21b0000 {
+				compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>;
+			};
+
+			weim: weim@21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
+				reg = <0x021b8000 0x4000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_EIM>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
+			ocotp: efuse@21bc000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6ul-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6UL_CLK_OCOTP>;
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+			};
+
+			csi: csi@21c4000 {
+				compatible = "fsl,imx6ul-csi";
+				reg = <0x021c4000 0x4000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CSI>;
+				clock-names = "mclk";
+				status = "disabled";
+			};
+
+			lcdif: lcdif@21c8000 {
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
+				reg = <0x021c8000 0x4000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
+					 <&clks IMX6UL_CLK_LCDIF_APB>,
+					 <&clks IMX6UL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			pxp: pxp@21cc000 {
+				compatible = "fsl,imx6ul-pxp";
+				reg = <0x021cc000 0x4000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PXP>;
+				clock-names = "axi";
+			};
+
+			qspi: spi@21e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-qspi";
+				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_QSPI>,
+					 <&clks IMX6UL_CLK_QSPI>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			wdog3: watchdog@21e4000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x021e4000 0x4000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG3>;
+				status = "disabled";
+			};
+
+			uart2: serial@21e8000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART2_IPG>,
+					 <&clks IMX6UL_CLK_UART2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@21ec000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART3_IPG>,
+					 <&clks IMX6UL_CLK_UART3_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@21f0000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART4_IPG>,
+					 <&clks IMX6UL_CLK_UART4_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART5_IPG>,
+					 <&clks IMX6UL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c4: i2c@21f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C4>;
+				status = "disabled";
+			};
+
+			uart6: serial@21fc000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021fc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART6_IPG>,
+					 <&clks IMX6UL_CLK_UART6_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-14x14-evk.dts
new file mode 100644
index 0000000000000..74aaa8a56a3de
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-14x14-evk.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6ull.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/ {
+	model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board";
+	compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+	assigned-clock-rates = <320000000>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dts
new file mode 100644
index 0000000000000..3e0897c3a2963
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-aster",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
new file mode 100644
index 0000000000000..de4dc7c1a03ae
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		power {
+			label = "Wake-Up";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&ecspi1 {
+	status = "okay";
+
+	num-cs = <2>;
+	cs-gpios = <
+		&gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */
+		&gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */
+	>;
+};
+
+/*
+ * Following SODIMM Pins should not be accessed as GPIO on Aster board:
+ * 134 - AIN5_SCL (no connection)
+ * 127 - Voltage Level Translator OE# signal (IC11 and IC12)
+ *
+ * To configure GPIO to LED5, please disable FEC2 and uncomment the following:
+ *	&iomuxc {
+ *		pinctrl-names = "default";
+ *		pinctrl-0 = <
+ *			&pinctrl_gpio1
+ *			&pinctrl_gpio2
+ *			&pinctrl_gpio3
+ *			&pinctrl_gpio4
+ *			&pinctrl_gpio6 - for non-WiFi modules only
+ *			&pinctrl_gpio7
+ *			&pinctrl_gpio_aster
+ *		>;
+ *
+ *		pinctrl_gpio_aster: gpio-aster {
+ *			fsl,pins = <
+ *				MX6UL_PAD_GPIO1_IO07__GPIO1_IO07    0x1b0b0
+ *			>;
+ *		};
+ *  };
+ */
+
+&i2c1 {
+	status = "okay";
+
+	m41t0m6: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	status = "okay";
+};
+
+/* PWM <C> */
+&pwm6 {
+	status = "okay";
+};
+
+/* PWM <D> */
+&pwm7 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-aster.dts
new file mode 100644
index 0000000000000..919c0464d6cb5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-aster.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-emmc-aster",
+		     "toradex,colibri-imx6ull-emmc",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-eval-v3.dts
new file mode 100644
index 0000000000000..61b93cb040c7f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-eval-v3.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx6ull-emmc-eval",
+		     "toradex,colibri-imx6ull-emmc",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris-v2.dts
new file mode 100644
index 0000000000000..b9060c2f7977e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris-v2.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1G (eMMC) on Colibri Iris V2";
+	compatible = "toradex,colibri-imx6ull-iris-v2",
+		     "toradex,colibri-imx6ull-emmc",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris.dts
new file mode 100644
index 0000000000000..0ab71f2f5daa4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-emmc-iris",
+		     "toradex,colibri-imx6ull-emmc",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-nonwifi.dtsi
new file mode 100644
index 0000000000000..ea238525d5c02
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-nonwifi.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include "imx6ull-colibri.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc2; /* eMMC */
+		mmc1 = &usdhc1; /* MMC 4-bit slot */
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_8",
+			  "SODIMM_6",
+			  "SODIMM_129",
+			  "SODIMM_89",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184",
+			  "SODIMM_4",
+			  "SODIMM_2",
+			  "SODIMM_106",
+			  "SODIMM_71",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_99",
+			  "SODIMM_102",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_32",
+			  "SODIMM_34",
+			  "SODIMM_135",
+			  "SODIMM_77",
+			  "SODIMM_100",
+			  "SODIMM_186",
+			  "SODIMM_196",
+			  "SODIMM_194";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_73",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "SODIMM_104",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_190",
+			  "SODIMM_47",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_29",
+			  "SODIMM_37",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_140",
+			  "SODIMM_59",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_133",
+			  "SODIMM_146",
+			  "SODIMM_28",
+			  "SODIMM_75",
+			  "SODIMM_96",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_69",
+			  "SODIMM_98",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_137",
+			  "SODIMM_95",
+			  "SODIMM_107",
+			  "SODIMM_131",
+			  "SODIMM_93",
+			  "",
+			  "SODIMM_138",
+			  "",
+			  "SODIMM_105",
+			  "SODIMM_127";
+};
+
+/* NAND */
+&gpmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
+		&pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7
+		&pinctrl_gpmi_gpio>;
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
+};
+
+/* eMMC */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2emmc>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_module_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dts
new file mode 100644
index 0000000000000..d6da984e518d4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dtsi
new file mode 100644
index 0000000000000..692ef26fbab30
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* fixed crystal dedicated to mcp2515 */
+	clk16m: clk16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&ecspi1 {
+	status = "okay";
+
+	mcp2515: can@0 {
+		compatible = "microchip,mcp2515";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		reg = <0>;
+		clocks = <&clk16m>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&reg_3v3>;
+		xceiver-supply = <&reg_5v0>;
+		status = "okay";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	m41t0m6: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	status = "okay";
+};
+
+/* PWM <C> */
+&pwm6 {
+	status = "okay";
+};
+
+/* PWM <D> */
+&pwm7 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dts
new file mode 100644
index 0000000000000..f6b31118be17f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256M/512B on Colibri Iris V2";
+	compatible = "toradex,colibri-imx6ull-iris-v2",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio1 {
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+};
+
+&gpio5 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dtsi
new file mode 100644
index 0000000000000..93649cad0cc0e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+	};
+};
+
+
+&usdhc1 {
+	cap-power-off-card;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	/delete-property/ keep-power-in-suspend;
+	/delete-property/ no-1-8-v;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dts
new file mode 100644
index 0000000000000..2a0d0fc3b9d65
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-iris",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
new file mode 100644
index 0000000000000..f52f8b5ad8a6e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		power {
+			label = "Wake-Up";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&gpio1 {
+	/*
+	 * uart25_tx_on turns the UART transceiver on. If one wants to turn the
+	 * transceiver off, that property has to be deleted and the gpio handled
+	 * in userspace.
+	 * The same applies to uart1_tx_on.
+	 */
+	uart25_tx_on-hog {
+		gpio-hog;
+		gpios = <15 0>;
+		output-high;
+	};
+};
+
+&gpio2 {
+	uart1_tx_on-hog {
+		gpio-hog;
+		gpios = <7 0>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	m41t0m6: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	status = "okay";
+};
+
+/* PWM <C> */
+&pwm6 {
+	status = "okay";
+};
+
+/* PWM <D> */
+&pwm7 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-nonwifi.dtsi
new file mode 100644
index 0000000000000..88901db255d6b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-nonwifi.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+#include "imx6ull-colibri.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_8",
+			  "SODIMM_6",
+			  "SODIMM_129",
+			  "SODIMM_89",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184",
+			  "SODIMM_4",
+			  "SODIMM_2",
+			  "SODIMM_106",
+			  "SODIMM_71",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_99",
+			  "SODIMM_102",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_32",
+			  "SODIMM_34",
+			  "SODIMM_135",
+			  "SODIMM_77",
+			  "SODIMM_100",
+			  "SODIMM_186",
+			  "SODIMM_196",
+			  "SODIMM_194";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_73",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "SODIMM_104",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_190",
+			  "SODIMM_47",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_29",
+			  "SODIMM_37",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_59",
+			  "",
+			  "",
+			  "SODIMM_133",
+			  "",
+			  "SODIMM_28",
+			  "SODIMM_75",
+			  "SODIMM_96",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_69",
+			  "SODIMM_98",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_137",
+			  "SODIMM_95",
+			  "SODIMM_107",
+			  "SODIMM_131",
+			  "SODIMM_93",
+			  "",
+			  "SODIMM_138",
+			  "",
+			  "SODIMM_105",
+			  "SODIMM_127";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
+		&pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7>;
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-aster.dts
new file mode 100644
index 0000000000000..c7da5b41966fa
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-aster.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-wifi-aster",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-eval-v3.dts
new file mode 100644
index 0000000000000..917f5dbe64ba3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-eval-v3.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx6ull-wifi-eval", "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris-v2.dts
new file mode 100644
index 0000000000000..488da6df56fa1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris-v2.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris V2";
+	compatible = "toradex,colibri-imx6ull-wifi-iris-v2",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio1 {
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+};
+
+&gpio5 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris.dts
new file mode 100644
index 0000000000000..e632532547545
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-wifi-iris",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi.dtsi
new file mode 100644
index 0000000000000..db59ee6b1c860
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+#include "imx6ull-colibri.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	wifi_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_wifi_pdn>;
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu0 {
+	clock-frequency = <792000000>;
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_8",
+			  "SODIMM_6",
+			  "SODIMM_129",
+			  "",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184",
+			  "SODIMM_4",
+			  "SODIMM_2",
+			  "SODIMM_106",
+			  "SODIMM_71",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_99",
+			  "SODIMM_102",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_32",
+			  "SODIMM_34",
+			  "SODIMM_135",
+			  "SODIMM_77",
+			  "SODIMM_100",
+			  "SODIMM_186",
+			  "SODIMM_196",
+			  "SODIMM_194";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_73",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "SODIMM_104",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_190",
+			  "SODIMM_47",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_29",
+			  "SODIMM_37",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_59",
+			  "",
+			  "",
+			  "SODIMM_133",
+			  "",
+			  "SODIMM_28",
+			  "SODIMM_75",
+			  "SODIMM_96",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_69",
+			  "SODIMM_98",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_137",
+			  "SODIMM_95",
+			  "SODIMM_107",
+			  "SODIMM_131",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_105";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
+		&pinctrl_gpio4 &pinctrl_gpio7>;
+
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_gpio1>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	max-frequency = <25000000>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_module_3v3>;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi
new file mode 100644
index 0000000000000..fde8a19aac0f7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi
@@ -0,0 +1,773 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+#include "imx6ull.dtsi"
+
+/ {
+	/* Ethernet aliases to ensure correct MAC addresses */
+	aliases {
+		ethernet0 = &fec2;
+		ethernet1 = &fec1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm4 0 5000000 1>;
+		status = "disabled";
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_usbc_det>;
+		id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		label = "USBC";
+		self-powered;
+		type = "micro";
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio5 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	panel_dpi: panel-dpi {
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "+V3.3_AVDD_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_sd1_vqmmc: regulator-sd1-vqmmc {
+		compatible = "regulator-gpio";
+		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
+		regulator-always-on;
+		regulator-name = "+V3.3_1.8_SD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x1 3300000 0x0>;
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed-clock";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "+V3.3_ETH";
+		regulator-type = "voltage";
+		vin-supply = <&reg_module_3v3>;
+		clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
+		startup-delay-us = <150000>;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_module_3v3_avdd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+/* Colibri SPI */
+&ecspi1 {
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+};
+
+/* Ethernet */
+&fec2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet2>;
+	pinctrl-1 = <&pinctrl_enet2_sleep>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_eth_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <2>;
+		};
+	};
+};
+
+/* NAND */
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	fsl,use-minimum-ecc;
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	nand-ecc-strength = <8>;
+	nand-ecc-step-size = <512>;
+	status = "okay";
+};
+
+/* I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	/* Atmel maxtouch controller */
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>;
+		reg = <0x4a>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;       /* SODIMM 107 / INT */
+		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;    /* SODIMM 106 / RST */
+		status = "disabled";
+	};
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	/* Use low frequency to compensate for the high pull-up values. */
+	clock-frequency = <40000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	ad7879_ts: touchscreen@2c {
+		compatible = "adi,ad7879-1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_ad7879_int>;
+		reg = <0x2c>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	status = "disabled";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+/* PWM <B> */
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+};
+
+/* PWM <C> */
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+};
+
+/* PWM <D> */
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+};
+
+&sdma {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+};
+
+/* Colibri UART_B */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+};
+
+/* Colibri UART_C */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,dte-mode;
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	usb-role-switch;
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	dr_mode = "host";
+};
+
+/* Colibri MMC/SD */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd_sleep>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */
+	disable-wp;
+	keep-power-in-suspend;
+	no-1-8-v;
+	vqmmc-supply = <&reg_sd1_vqmmc>;
+	wakeup-source;
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00        0x3000 /* SODIMM 8 */
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01        0x3000 /* SODIMM 6 */
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08        0x3000 /* SODIMM 4 */
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x3000 /* SODIMM 2 */
+		>;
+	};
+
+	pinctrl_atmel_adap: atmeladapgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__GPIO4_IO16          0xb0a0  /* SODIMM 28 */
+			MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05       0xb0a0  /* SODIMM 30 */
+		>;
+	};
+
+	pinctrl_atmel_conn: atmelconngrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10          0xb0a0  /* SODIMM 106 */
+		>;
+	};
+
+	pinctrl_can_int: canintgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x13010	/* SODIMM 73 */
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet2_sleep: enet2-sleepgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x0
+			MX6UL_PAD_GPIO1_IO07__GPIO1_IO07	0x0
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x0
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x0
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x0
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x0
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x0
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x70a0	/* SODIMM 86 */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0	/* SODIMM 88 */
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0 /* SODIMM 92 */
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100a0 /* SODIMM 90 */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x30a0	/* SODIMM 71 */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x10b0 /* SODIMM 77 */
+			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x70a0 /* SODIMM 99 */
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x10b0 /* SODIMM 133 */
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x10b0 /* SODIMM 135 */
+			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x10b0 /* SODIMM 100 */
+			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x70a0 /* SODIMM 102 */
+			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07	0x10b0 /* SODIMM 104 */
+			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x10b0 /* SODIMM 186 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp { /* Camera */
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x10b0 /* SODIMM 69 */
+			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x10b0 /* SODIMM 75 */
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x10b0 /* SODIMM 85 */
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x10b0 /* SODIMM 96 */
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x10b0 /* SODIMM 98 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp { /* CAN2 */
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x10b0 /* SODIMM 178 */
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x10b0 /* SODIMM 188 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x10b0 /* SODIMM 65 */
+		>;
+	};
+
+	pinctrl_gpio6: gpio6grp { /* Wifi pins */
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x10b0 /* SODIMM 89 */
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0 /* SODIMM 79 */
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0 /* SODIMM 81 */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x10b0 /* SODIMM 97 */
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0 /* SODIMM 101 */
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0 /* SODIMM 103 */
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x10b0 /* SODIMM 94 */
+		>;
+	};
+
+	pinctrl_gpio7: gpio7grp { /* CAN1 */
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0xb0b0/* SODIMM 55 */
+			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0xb0b0 /* SODIMM 63 */
+		>;
+	};
+
+	/*
+	 * With an eMMC instead of a raw NAND device the following pins
+	 * are available at SODIMM pins.
+	 */
+	pinctrl_gpmi_gpio: gpmigpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x10b0 /* SODIMM 140 */
+			MX6UL_PAD_NAND_CE0_B__GPIO4_IO13	0x10b0 /* SODIMM 144 */
+			MX6UL_PAD_NAND_CLE__GPIO4_IO15		0x10b0 /* SODIMM 146 */
+			MX6UL_PAD_NAND_READY_B__GPIO4_IO12	0x10b0 /* SODIMM 142 */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x100a9
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x100a9
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x100a9
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x100a9
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x100a9
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x100a9
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x100a9
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x100a9
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x100a9
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x100a9
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x100a9
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x100a9
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x100a9
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0	/* SODIMM 196 */
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0	/* SODIMM 194 */
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0	/* SODIMM 196 */
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0	/* SODIMM 194 */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001f8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001f8b0
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079	/* SODIMM 76 */
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079	/* SODIMM 70 */
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079	/* SODIMM 60 */
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079	/* SODIMM 58 */
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079	/* SODIMM 78 */
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079	/* SODIMM 72 */
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079	/* SODIMM 80 */
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079	/* SODIMM 46 */
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079	/* SODIMM 62 */
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079	/* SODIMM 48 */
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079	/* SODIMM 74 */
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079	/* SODIMM 50 */
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079	/* SODIMM 52 */
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079	/* SODIMM 54 */
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079	/* SODIMM 66 */
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079	/* SODIMM 64 */
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079	/* SODIMM 57 */
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079	/* SODIMM 61 */
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079	/* SODIMM 56 */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079	/* SODIMM 44 */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x00079	/* SODIMM 68 */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x00079	/* SODIMM 82 */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079		/* SODIMM 59 */
+		>;
+	};
+
+	pinctrl_pwm5: pwm5grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079		/* SODIMM 28 */
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079		/* SODIMM 30 */
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079	/* SODIMM 67 */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1	/* SODIMM 33 */
+			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1	/* SODIMM 35 */
+			MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS	0x1b0b1	/* SODIMM 27 */
+			MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS	0x1b0b1	/* SODIMM 25 */
+		>;
+	};
+
+	pinctrl_uart1_ctrl1: uart1ctrl1grp { /* Additional DTR, DCD */
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x70a0 /* SODIMM 31 / DCD */
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x10b0 /* SODIMM 29 / DSR */
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x90b1 /* SODIMM 23 / DTR */
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x10b0 /* SODIMM 37 / RI */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1 /* SODIMM 36 */
+			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1 /* SODIMM 38 */
+			MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS	0x1b0b1 /* SODIMM 32 */
+			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1 /* SODIMM 34 */
+		>;
+	};
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1 /* SODIMM 19 */
+			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1 /* SODIMM 21 */
+		>;
+	};
+
+	pinctrl_usbh_reg: usbhreggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x10b0 /* SODIMM 129 / USBH_PEN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059 /* SODIMM 47 */
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059 /* SODIMM 190 */
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059 /* SODIMM 192 */
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059 /* SODIMM 49 */
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059 /* SODIMM 51 */
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059 /* SODIMM 53 */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17069
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17069
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17069
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17069
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17069
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10069
+
+			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x10
+		>;
+	};
+
+	pinctrl_usdhc2emmc: usdhc2emmcgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_atmel_snvs_conn: atmelsnvsconngrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
+		>;
+	};
+
+	pinctrl_snvs_gpio1: snvsgpio1grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x110a0	/* SODIMM 95 */
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x1b0a0	/* SODIMM 105 */
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0a0	/* SODIMM 131 / USBH_OC */
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x110a0	/* SODIMM 138 */
+		>;
+	};
+
+	pinctrl_snvs_gpio3: snvsgpio3grp { /* Wifi pins */
+		fsl,pins = <
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0	/* SODIMM 127 */
+		>;
+	};
+
+	pinctrl_snvs_ad7879_int: snvsad7879intgrp { /* TOUCH Interrupt */
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x100b0
+		>;
+	};
+
+	pinctrl_snvs_reg_sd: snvsregsdgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400100b0
+		>;
+	};
+
+	pinctrl_snvs_usbc_det: snvsusbcdetgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x130b0
+		>;
+	};
+
+	pinctrl_snvs_gpiokeys: snvsgpiokeysgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 / WAKE_UP */
+		>;
+	};
+
+	pinctrl_snvs_usdhc1_cd: snvsusdhc1cdgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0a0 /* SODIMM 43 / MMC_CD */
+		>;
+	};
+
+	pinctrl_snvs_usdhc1_cd_sleep: snvsusdhc1cd-sleepgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0
+		>;
+	};
+
+	pinctrl_snvs_wifi_pdn: snvswifipdngrp {
+		fsl,pins = <
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-drc02.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-drc02.dts
new file mode 100644
index 0000000000000..b539975a872cd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-drc02.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2
+ * DHCOR PCB number: 578-200 or newer
+ * DHCOM PCB number: 579-200 or newer
+ * DRC02 PCB number: 568-100 or newer (2nd ethernet by SoM)
+ */
+/dts-v1/;
+
+#include "imx6ull-dhcom-som.dtsi"
+#include "imx6ull-dhcom-som-cfg-sdcard.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOM on DRC02";
+	compatible = "dh,imx6ull-dhcom-drc02", "dh,imx6ull-dhcom-som",
+		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
+};
+
+/*
+ * The signals for CAN2 TX and RX are routed to the DHCOM UART1 RTS/CTS pins.
+ * Therefore the UART RTS/CTS must be output on other DHCOM pins, see uart1
+ * node below.
+ */
+&can2 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "DRC02-In2",
+		"", "", "", "",
+		"", "", "DHCOM-I", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "DRC02-HW0", "DRC02-HW1", "DHCOM-M",
+		"DRC02-HW2", "DHCOM-U", "DHCOM-T", "DHCOM-S",
+		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
+		"DHCOM-N", "", "", "";
+	/*
+	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+	 * GPIO line, however the i.MX6ULL UART driver assumes RX happens
+	 * during TX anyway and that it only controls drive enable DE
+	 * line. Hence, the RX is always enabled here.
+	 */
+	rs485-rx-en-hog {
+		gpio-hog;
+		gpios = <25 0>; /* GPIO Q */
+		line-name = "rs485-rx-en";
+		output-low;
+	};
+};
+
+&gpio5 {
+	gpio-line-names =
+		"DHCOM-A", "DHCOM-B", "DHCOM-C", "DRC02-Out2",
+		"DHCOM-E", "", "", "DRC02-Out1",
+		"DRC02-In1", "DHCOM-H", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+/* DHCOM I2C2 */
+&i2c1 {
+	eeprom@56 {
+		compatible = "atmel,24c04";
+		reg = <0x56>;
+		pagesize = <16>;
+	};
+};
+
+&uart1 {
+	/delete-property/ uart-has-rtscts;
+	rts-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
+	cts-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; /* GPIO M */
+};
+
+/* Use UART as RS485 */
+&uart2 {
+	/delete-property/ uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rts-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* GPIO P */
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts
new file mode 100644
index 0000000000000..b29713831a744
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-RTC-WBT-ADC-I-01D2
+ * DHCOR PCB number: 578-200 or newer
+ * DHCOM PCB number: 579-200 or newer
+ * PDK2 PCB number: 516-400 or newer
+ */
+/dts-v1/;
+
+#include "imx6ull-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOM on Premium Developer Kit (2)";
+	compatible = "dh,imx6ull-dhcom-pdk2", "dh,imx6ull-dhcom-som",
+		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	display_bl: display-bl {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; /* GPIO G */
+		power-supply = <&reg_panel_3v3>;
+		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; /* GPIO D */
+			label = "TA4-GPIO-D";
+			linux,code = <KEY_D>;
+			wakeup-source;
+		};
+	};
+
+	led: led {
+		compatible = "gpio-leds";
+
+		/*
+		 * Disable PDK2 LED5, because GPIO E is
+		 * already used as touch interrupt.
+		 */
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <5>; /* PDK2 LED5 */
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; /* GPIO E */
+			status = "disabled";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <6>; /* PDK2 LED6 */
+			gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; /* GPIO F */
+		};
+
+		/*
+		 * Disable PDK2 LED7, because GPIO H is
+		 * already used for WiFi pin WL_REG_ON.
+		 */
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <7>; /* PDK2 LED7 */
+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* GPIO H */
+			status = "disabled";
+		};
+
+		/*
+		 * Disable PDK2 LED8, because GPIO I is
+		 * already used for BT pin BT_REG_ON.
+		 */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <8>; /* PDK2 LED8 */
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			status = "disabled";
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0edh6";
+		backlight = <&display_bl>;
+		power-supply = <&reg_panel_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	/* Filtered supply voltage */
+	reg_pdk2_24v: regulator-pdk2-24v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <24000000>;
+		regulator-min-microvolt = <24000000>;
+		regulator-name = "24V_PDK2";
+	};
+
+	/* PDK2 U35 */
+	reg_pdk2_3v3: regulator-pdk2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3V3_PDK2";
+		vin-supply = <&reg_pdk2_24v>;
+	};
+
+	/* 560-200 U1 */
+	reg_panel_3v3: regulator-panel-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3V3_PANEL";
+		vin-supply = <&reg_pdk2_24v>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "sgtl5000";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&clk_ext_audio_codec>;
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+/* DHCOM I2C1 */
+&i2c2 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		VDDA-supply = <&reg_pdk2_3v3>;
+		VDDIO-supply = <&reg_pdk2_3v3>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		power-supply = <&reg_panel_3v3>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+
+	port {
+		lcd_display_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-picoitx.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-picoitx.dts
new file mode 100644
index 0000000000000..e4cc2223583aa
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-picoitx.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2
+ * DHCOR PCB number: 578-200 or newer
+ * DHCOM PCB number: 579-200 or newer
+ * PicoITX PCB number: 487-600 or newer
+ */
+/dts-v1/;
+
+#include "imx6ull-dhcom-som.dtsi"
+#include "imx6ull-dhcom-som-cfg-sdcard.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOM on PicoITX";
+	compatible = "dh,imx6ull-dhcom-picoitx", "dh,imx6ull-dhcom-som",
+		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+		};
+	};
+};
+
+&fec1 {
+	phy-handle = <&mdio1_phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio1_phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			clock-names = "rmii-ref";
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>;
+			pinctrl-names = "default";
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+	};
+};
+
+&fec2 {
+	status = "disabled";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "PicoITX-HW2", "PicoITX-HW1", "DHCOM-M",
+		"PicoITX-HW0", "DHCOM-U", "DHCOM-T", "DHCOM-S",
+		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
+		"DHCOM-N", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"DHCOM-A", "DHCOM-B", "PicoITX-In2", "PicoITX-Out2",
+		"PicoITX-In1", "", "", "PicoITX-Out1",
+		"DHCOM-G", "DHCOM-H", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi
new file mode 100644
index 0000000000000..040421f9c9700
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ */
+
+/*
+ * Special SoM configuration: SD card
+ *
+ * Enabled:  Micro SD card on module or
+ *           external SD card via DHCOM depends on hardware variant
+ *           GPIO H and GPIO I will be available
+ *           DHCOM UART2 will be available
+ * Disabled: WiFi and BT
+ */
+
+/*
+ * To use usdhc1 as SD card, the WiFi node must be deleted.
+ * BT is also not available, so remove BT from the UART node.
+ */
+/delete-node/ &brcmf;
+/delete-node/ &bluetooth;
+
+/ {
+	aliases {
+		mmc1 = &usdhc1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+	};
+};
+
+/* Micro SD card on module or external SD card via DHCOM */
+&usdhc1 {
+	/delete-property/ #address-cells;
+	/delete-property/ #size-cells;
+	/delete-property/ keep-power-in-suspend;
+	/delete-property/ mmc-pwrseq;
+	/delete-property/ non-removable;
+	/delete-property/ wakeup-source;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
+
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
new file mode 100644
index 0000000000000..830b5a5064f28
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ */
+
+#include "imx6ull-dhcor-som.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ spi2;
+		/delete-property/ spi3;
+		i2c0 = &i2c2;
+		i2c1 = &i2c1;
+		mmc2 = &usdhc2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		serial0 = &uart1;
+		serial1 = &uart6; /* DHCOM UART2, special hardware required */
+		serial2 = &uart3;
+		serial3 = &uart2; /* Use BT UART always as ttymxc3 */
+		serial4 = &uart4;
+		serial5 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi4; /* DHCOM SPI2, special hardware required */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_ext_3v3_ref: regulator-ext-3v3-ref {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC_3V3_REF";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg1-vbus";
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg2-vbus";
+	};
+
+	/* SoM with WiFi/BT: WiFi pin WL_REG_ON is connected to a DHCOM GPIO */
+	/omit-if-no-ref/ usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; /* GPIO H */
+	};
+};
+
+/* SoM with WiFi/BT: BT pin BT_REG_ON is connected to a DHCOM GPIO */
+&bluetooth {
+	shutdown-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * The signals for CAN2 TX and RX are routed to the DHCOM UART1 RTS/CTS pins.
+ * Only if this pins are used as CAN interface enable it on board layer.
+ */
+&can2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+/* DHCOM SPI1 */
+&ecspi1 {
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * DHCOM SPI2
+ * Special hardware required that uses the pins of FEC2. Therefore this SPI
+ * interface can only be used if FEC2 is disabled.
+ */
+&ecspi4 {
+	cs-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	pinctrl-names = "default";
+};
+
+/* DHCOM ETH1 */
+&fec1 {
+	phy-handle = <&mdio2_phy0>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* DHCOM ETH2 */
+&fec2 {
+	phy-handle = <&mdio2_phy1>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_fec2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio2_phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			clock-names = "rmii-ref";
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>;
+			pinctrl-names = "default";
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+
+		mdio2_phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			clock-names = "rmii-ref";
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_fec2_phy &pinctrl_snvs_fec2_phy>;
+			pinctrl-names = "default";
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "DHCOM-INT",
+		"", "", "", "",
+		"", "", "DHCOM-I", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+	pinctrl-0 = <&pinctrl_spi1_switch
+		     &pinctrl_dhcom_i &pinctrl_dhcom_int>;
+	pinctrl-names = "default";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "DHCOM-L", "DHCOM-K", "DHCOM-M",
+		"DHCOM-J", "DHCOM-U", "DHCOM-T", "DHCOM-S",
+		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
+		"DHCOM-N", "", "", "";
+	pinctrl-0 = <&pinctrl_dhcom_j &pinctrl_dhcom_k
+		     &pinctrl_dhcom_l &pinctrl_dhcom_m
+		     &pinctrl_dhcom_n &pinctrl_dhcom_o
+		     &pinctrl_dhcom_p &pinctrl_dhcom_q
+		     &pinctrl_dhcom_r &pinctrl_dhcom_s
+		     &pinctrl_dhcom_t &pinctrl_dhcom_u>;
+	pinctrl-names = "default";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"DHCOM-A", "DHCOM-B", "DHCOM-C", "DHCOM-D",
+		"DHCOM-E", "", "", "DHCOM-F",
+		"DHCOM-G", "DHCOM-H", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+	pinctrl-0 = <&pinctrl_snvs_dhcom_a &pinctrl_snvs_dhcom_b
+		     &pinctrl_snvs_dhcom_c &pinctrl_snvs_dhcom_d
+		     &pinctrl_snvs_dhcom_e &pinctrl_snvs_dhcom_f
+		     &pinctrl_snvs_dhcom_g &pinctrl_snvs_dhcom_h>;
+	pinctrl-names = "default";
+};
+
+/* DHCOM I2C2 */
+&i2c1 {
+	rtc_i2c: rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	/* Microchip 24AA025E48T-I/OT containing MAC for DHCOM ETH1 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	/* TI ADC101C027 */
+	adc@51 {
+		compatible = "ti,adc101c";
+		reg = <0x51>;
+		vref-supply = <&reg_ext_3v3_ref>;
+	};
+
+	/* TI ADC101C027 */
+	adc@52 {
+		compatible = "ti,adc101c";
+		reg = <0x52>;
+		vref-supply = <&reg_ext_3v3_ref>;
+	};
+
+	/* Microchip 24AA025E48T-I/OT containing MAC for DHCOM ETH2 */
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
+/* DHCOM I2C1 */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-0 = <&pinctrl_lcdif>;
+	pinctrl-names = "default";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+};
+
+&sai2 {
+	assigned-clock-rates = <320000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-names = "default";
+};
+
+&tsc {
+	measure-delay-time = <0xffff>;
+	pinctrl-0 = <&pinctrl_tsc>;
+	pinctrl-names = "default";
+	pre-charge-time = <0xfff>;
+	touchscreen-average-samples = <32>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+};
+
+/* DHCOM UART1 */
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * DHCOM UART2 (alternative)
+ * Special hardware required that uses DHCOM GPIO pins for DHCOM UART2.
+ * Therefore this UART interface can only be used if DHCOM GPIOs J/K/L/M are
+ * removed from GPIO hog muxing.
+ */
+&uart6 {
+	pinctrl-0 = <&pinctrl_uart6>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	hnp-disable;
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	pinctrl-names = "default";
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current; /* Overcurrent pin is used for TSC */
+	dr_mode = "host";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	pinctrl-names = "default";
+	tpl-support;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+/* WiFi on LGA */
+&usdhc1 {
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+};
+
+/* eMMC on module */
+&usdhc2 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	/* DHCOM GPIOs I..U + INT_HIGHEST_PRIORITY */
+	pinctrl_dhcom_i: dhcom-i-grp {
+		fsl,pins = <MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_j: dhcom-j-grp {
+		fsl,pins = <MX6UL_PAD_CSI_HSYNC__GPIO4_IO20	0x400120b0>;
+	};
+
+	pinctrl_dhcom_k: dhcom-k-grp {
+		fsl,pins = <MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_l: dhcom-l-grp {
+		fsl,pins = <MX6UL_PAD_CSI_MCLK__GPIO4_IO17	0x400120b0>;
+	};
+
+	pinctrl_dhcom_m: dhcom-m-grp {
+		fsl,pins = <MX6UL_PAD_CSI_VSYNC__GPIO4_IO19	0x400120b0>;
+	};
+
+	pinctrl_dhcom_n: dhcom-n-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x400120b0>;
+	};
+
+	pinctrl_dhcom_o: dhcom-o-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x400120b0>;
+	};
+
+	pinctrl_dhcom_p: dhcom-p-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x400120b0>;
+	};
+
+	pinctrl_dhcom_q: dhcom-q-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x400120b0>;
+	};
+
+	pinctrl_dhcom_r: dhcom-r-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x400120b0>;
+	};
+
+	pinctrl_dhcom_s: dhcom-s-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x400120b0>;
+	};
+
+	pinctrl_dhcom_t: dhcom-t-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x400120b0>;
+	};
+
+	pinctrl_dhcom_u: dhcom-u-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x400120b0>;
+	};
+
+	pinctrl_dhcom_int: dhcom-int-grp {
+		fsl,pins = <MX6UL_PAD_JTAG_TMS__GPIO1_IO11	0x400120b0>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x100b1
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x1b0b0 /* SS0 */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO	0x100b1
+			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI	0x100b1
+			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK	0x100b1
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0 /* SS0 */
+		>;
+	};
+
+	pinctrl_fec1: fec1-grp {
+		fsl,pins = <
+			/* FEC1 uses MDIO bus from FEC2 */
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
+		>;
+	};
+
+	pinctrl_fec1_phy: fec1-phy-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0xb0 /* SMSC PHY reset */
+		>;
+	};
+
+	pinctrl_fec2: fec2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
+		>;
+	};
+
+	pinctrl_fec2_phy: fec2-phy-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24	0xb0 /* SMSC PHY reset */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif: lcdif-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_tsc: tsc-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6: uart6-grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
+			MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS	0x1b0b1
+			MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x120b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x17059 /* SD2 Reset */
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	/* DHCOM GPIOs A..H */
+	pinctrl_snvs_dhcom_a: snvs-dhcom-a-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_b: snvs-dhcom-b-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_c: snvs-dhcom-c-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_d: snvs-dhcom-d-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_e: snvs-dhcom-e-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_f: snvs-dhcom-f-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_g: snvs-dhcom-g-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_h: snvs-dhcom-h-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400120b0>;
+	};
+
+	pinctrl_snvs_fec1_phy: snvs-fec1-phy-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0xb1 /* SMSC PHY Int */
+		>;
+	};
+
+	pinctrl_snvs_fec2_phy: snvs-fec2-phy-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0xb1 /* SMSC PHY Int */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
new file mode 100644
index 0000000000000..047f7b2d85261
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ * Copyright (C) 2023 Marantec electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCR-iMX6ULL-C080-R051-SPI-WBT-I-01LG
+ * DHCOR PCB number: 578-200 or newer
+ * maveo box PCB number: 525-200 or newer
+ */
+
+/dts-v1/;
+
+#include "imx6ull-dhcor-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOR on maveo box";
+	compatible = "marantec,imx6ull-dhcor-maveo-box", "dh,imx6ull-dhcor-som",
+		     "fsl,imx6ull";
+
+	aliases {
+		mmc2 = &usdhc2;
+		spi0 = &ecspi4;
+		spi3 = &ecspi1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg1-vbus";
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg2-vbus";
+	};
+
+	/* WiFi pin WL_REG_ON is connected to GPIO 5.9 */
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* BT pin BT_REG_ON is connected to GPIO 1.18 */
+&bluetooth {
+	shutdown-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+};
+
+/* X10 connector */
+&ecspi4 {
+	cs-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spidev@0 {
+		compatible = "dh,dhcom-board";
+		reg = <0>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <54000000>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "BUTTON-USER", "", "",
+		"BUTTON-RESET", "", "", "",
+		"", "", "", "",
+		"", "", "BT-REG-ON", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"PSOC-GPIO-1", "", "", "X10-12",
+		"X10-10", "PSOC-GPIO-2", "PSOC-GPIO-3", "",
+		"X10-11", "X10-9", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"DHCOR-HW0", "DHCOR-HW1", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "MAVEO-BOX-HW0", "LED-G", "MAVEO-BOX-VAR1",
+		"MAVEO-BOX-VAR0", "MAVEO-BOX-HW1", "MAVEO-BOX-HW2", "LED-B",
+		"LED-R", "", "", "",
+		"", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"PSOC-SWD-IO", "PSOC-SWD-CLK", "PSOC-RESET", "ZIGBEE-PROG",
+		"ZIGBEE-RESET", "", "PSOC-PWR-FAIL-OUT", "NFC-ENABLE",
+		"NFC-IRQ", "WL-REG-ON", "DHCOR-BOOT-M0", "DHCOR-BOOT-M1",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* Console UART */
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* BT on LGA */
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt_gpio>;
+};
+
+/* Zigbee UART */
+&uart3 {
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_snvs_zigbee_gpio>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current; /* Overcurrent pin isn't connected */
+	dr_mode = "otg";
+	hnp-disable;
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	pinctrl-names = "default";
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current; /* Overcurrent pin isn't connected */
+	dr_mode = "host";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	pinctrl-names = "default";
+	tpl-support;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+/* WiFi on LGA */
+&usdhc1 {
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	pinctrl-0 = <&pinctrl_usdhc1_wifi &pinctrl_snvs_wifi_gpio>;
+};
+
+/* eMMC */
+&usdhc2 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog_maveo_box>;
+	pinctrl-names = "default";
+
+	pinctrl_hog_maveo_box: hog-maveo-box-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x120b0    /* BUTTON_USER */
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x120b0    /* BUTTON_RESET */
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x400120b0 /* LED_G */
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x400120b0 /* LED_B */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x400120b0 /* LED_R */
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x400120b0 /* X10_9 */
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x400120b0 /* X10_10 */
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x400120b0 /* X10_11 */
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x400120b0 /* X10_12 */
+			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0x400120b0 /* PSOC_GPIO_1 */
+			MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05	0x400120b0 /* PSOC_GPIO_2 */
+			MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06	0x400120b0 /* PSOC_GPIO_3 */
+			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x120b0    /* MAVEO_BOX_HW0 */
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x120b0    /* MAVEO_BOX_HW1 */
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x120b0    /* MAVEO_BOX_HW2 */
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x120b0    /* MAVEO_BOX_VAR0 */
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x120b0    /* MAVEO_BOX_VAR1 */
+			MX6UL_PAD_LCD_CLK__GPIO3_IO00		0x120b0    /* DHCOR_HW0 */
+			MX6UL_PAD_LCD_ENABLE__GPIO3_IO01	0x120b0    /* DHCOR_HW1 */
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0x120b0
+			MX6UL_PAD_LCD_DATA01__GPIO3_IO06	0x120b0
+			MX6UL_PAD_LCD_DATA02__GPIO3_IO07	0x120b0
+			MX6UL_PAD_LCD_DATA03__GPIO3_IO08	0x120b0
+			MX6UL_PAD_LCD_DATA04__GPIO3_IO09	0x120b0
+			MX6UL_PAD_LCD_DATA05__GPIO3_IO10	0x120b0
+			MX6UL_PAD_LCD_DATA06__GPIO3_IO11	0x120b0
+			MX6UL_PAD_LCD_DATA07__GPIO3_IO12	0x120b0
+			MX6UL_PAD_LCD_DATA08__GPIO3_IO13	0x120b0
+			MX6UL_PAD_LCD_DATA09__GPIO3_IO14	0x120b0
+			MX6UL_PAD_LCD_DATA10__GPIO3_IO15	0x120b0
+			MX6UL_PAD_LCD_DATA11__GPIO3_IO16	0x120b0
+			MX6UL_PAD_LCD_DATA12__GPIO3_IO17	0x120b0
+			MX6UL_PAD_LCD_DATA13__GPIO3_IO18	0x120b0
+			MX6UL_PAD_LCD_DATA14__GPIO3_IO19	0x120b0
+			MX6UL_PAD_LCD_DATA15__GPIO3_IO20	0x120b0
+			MX6UL_PAD_LCD_DATA16__GPIO3_IO21	0x120b0
+			MX6UL_PAD_LCD_DATA17__GPIO3_IO22	0x120b0
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x120b0
+		>;
+	};
+
+	pinctrl_bt_gpio: bt-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x400120b0 /* BT_REG_ON */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO	0x100b1
+			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI	0x100b1
+			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK	0x100b1
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0 /* SS0 */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x4001b8b0
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_READY_B__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x120b0 /* USB_OTG1_PWR */
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x120b0 /* USB_OTG2_PWR */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x17059 /* SD2 Reset */
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-0 = <&pinctrl_snvs_hog_maveo_box>;
+	pinctrl-names = "default";
+
+	pinctrl_snvs_hog_maveo_box: snvs-hog-maveo-box-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x400120b0 /* PSOC_SWD_IO */
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x400120b0 /* PSOC_SWD_CLK */
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x400120b0 /* PSOC_RESET */
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x400120b0 /* PSOC_PWR_FAIL_OUT */
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x400120b0 /* NFC_ENABLE */
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x400120b0 /* NFC_IRQ */
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x120b0    /* DHCOR_BOOT_M0 */
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x120b0    /* DHCOR_BOOT_M1 */
+		>;
+	};
+
+	pinctrl_snvs_wifi_gpio: snvs-wifi-gpio-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400120b0 /* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_snvs_zigbee_gpio: snvs-zigbee-gpio-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x400120b0 /* ZIGBEE_PROG */
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x400120b0 /* ZIGBEE_RESET */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi
new file mode 100644
index 0000000000000..45315adfaa86f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ */
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/regulator/dlg,da9063-regulator.h>
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ mmc0;
+		/delete-property/ mmc1;
+	};
+
+	memory@80000000 {
+		/* Appropriate memory size will be filled by U-Boot */
+		reg = <0x80000000 0>;
+		device_type = "memory";
+	};
+};
+
+&cpu0 {
+	/*
+	 * Due to the design as a solderable SOM, there are no capacitors
+	 * below the SoC, therefore higher voltages are required.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		900000	1275000
+		792000	1250000 /* Voltage increased */
+		528000	1175000
+		396000	1025000
+		198000	950000
+	>;
+	fsl,soc-operating-points = <
+		/* KHz	uV */
+		900000	1250000
+		792000	1250000 /* Voltage increased */
+		528000	1175000
+		396000	1175000
+		198000	1175000
+	>;
+};
+
+&gpio1 {
+	pinctrl-0 = <&pinctrl_spi1_switch>;
+	pinctrl-names = "default";
+	/*
+	 * Pin SPI_BOOT_FLASH_EN (GPIO 1.9) is a switch for either using the
+	 * DHCOM SPI1 interface or accessing the SPI bootflash. Both using
+	 * ecspi1, but muxed to different pins. The DHCOM SPI1 interface uses
+	 * the pins PAD_LCD_DATA21..23 and the SPI bootflash uses the pins
+	 * PAD_CSI_DATA04..07. If the SPI bootflash is enabled the pins for
+	 * DHCOM GPIOs N/O/P/Q/R/S/T/U aren't usable anymore, because they
+	 * are used for the bus interface to the SPI bootflash. The GPIOs are
+	 * disconnected by a buffer which is also controlled via the pin
+	 * SPI_BOOT_FLASH_EN. Therefore the access to the bootflash is a
+	 * special case and is disabled by setting GPIO 1.9 to high.
+	 */
+	spi1-switch-hog {
+		gpio-hog;
+		gpios = <9 0>;
+		output-high;
+		line-name = "spi1-switch";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9061";
+		reg = <0x58>;
+
+		onkey {
+			compatible = "dlg,da9061-onkey", "dlg,da9062-onkey";
+			status = "disabled";
+		};
+
+		regulators {
+			vdd_soc_in_1v4: buck1 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SLEEP>; /* PFM */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SLEEP>;
+				regulator-max-microvolt = <1400000>;
+				regulator-min-microvolt = <1400000>;
+				regulator-name = "vdd_soc_in_1v4";
+			};
+
+			vcc_3v3: buck2 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_3v3";
+			};
+
+			/*
+			 * The current DRR3 memory can be supplied with a
+			 * voltage of either 1.35V or 1.5V. For reasons of
+			 * backward compatibility to only 1.5V DDR3 memory,
+			 * the voltage is set to 1.5V.
+			 */
+			vcc_ddr_1v35: buck3 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-max-microvolt = <1500000>;
+				regulator-min-microvolt = <1500000>;
+				regulator-name = "vcc_ddr_1v35";
+			};
+
+			vcc_2v5: ldo1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2500000>;
+				regulator-min-microvolt = <2500000>;
+				regulator-name = "vcc_2v5";
+			};
+
+			vdd_snvs_in_3v3: ldo2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vdd_snvs_in_3v3";
+			};
+
+			vcc_1v8: ldo3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+			};
+
+			vcc_1v2: ldo4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1200000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-name = "vcc_1v2";
+			};
+		};
+
+		thermal {
+			compatible = "dlg,da9061-thermal", "dlg,da9062-thermal";
+			status = "disabled";
+		};
+
+		watchdog {
+			compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog";
+			status = "disabled";
+		};
+	};
+};
+
+&ocotp {
+	/* Don't get write access by default */
+	read-only;
+};
+
+&reg_arm {
+	vin-supply = <&vdd_soc_in_1v4>;
+};
+
+&reg_soc {
+	vin-supply = <&vdd_soc_in_1v4>;
+};
+
+/* BT on LGA (BT_REG_ON is connected to LGA pin E1) */
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	/*
+	 * Actually, the maximum speed of the chip is 4MBdps, but there are
+	 * limitations that prevent this speed. It hasn't yet been figured out
+	 * what the reason for this is. Currently, the maximum speed of 3MBdps
+	 * can be used without any problems. If the limitation can be overcome,
+	 * the speed can be increased accordingly.
+	 */
+	bluetooth: bluetooth {
+		compatible = "brcm,bcm43430a1-bt"; /* muRata 1DX */
+		max-speed = <3000000>;
+		vbat-supply = <&vcc_3v3>;
+		vddio-supply = <&vcc_3v3>;
+	};
+};
+
+/* WiFi on LGA (WL_REG_ON is connected to LGA pin E3) */
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	pinctrl-0 = <&pinctrl_usdhc1_wifi>;
+	pinctrl-names = "default";
+	wakeup-source;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; /* muRata 1DX */
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x4001b8b0
+		>;
+	};
+
+	pinctrl_spi1_switch: spi1-switch-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x120b0 /* SPI_BOOT_FLASH_EN */
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1_wifi: usdhc1-wifi-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x1b0b0
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10010
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x1b0b0
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x1b0b0
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x1b0b0
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-jozacp.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-jozacp.dts
new file mode 100644
index 0000000000000..a152eeb78e882
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-jozacp.dts
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6ull.dtsi"
+
+/ {
+	model = "JOZ Access Point";
+	compatible = "joz,jozacp", "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* On board name LED_RGB1 */
+	led-controller-1 {
+		compatible = "pwm-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			pwms = <&pwm1 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			pwms = <&pwm3 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			pwms = <&pwm5 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* On board name LED_RGB2 */
+	led-controller-2 {
+		compatible = "pwm-leds";
+
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+			pwms = <&pwm2 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <4>;
+			pwms = <&pwm4 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <5>;
+			pwms = <&pwm6 0 10000000 0>;
+			max-brightness = <255>;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_5v0>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vbus>;
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&cpu0 {
+	clock-frequency = <792000000>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			interrupts-extended = <&gpio1 29 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+	status = "okay";
+};
+
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	dtr-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	vbus-supply = <&reg_vbus>;
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	cap-mmc-hw-reset;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sd;
+	non-removable;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC	 0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x038b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x170b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* HW Revision */
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x1b0b0
+
+			/* HW ID */
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0
+
+			/* Digital inputs */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x11000
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x11000
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x11000
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x11000
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x11000
+
+			/* Isolated outputs */
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x01020
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21	0x01020
+			MX6UL_PAD_UART2_RTS_B__GPIO1_IO23	0x01020
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x01020
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x01020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001f8b1
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001f8b1
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001f8b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA01__PWM2_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA02__PWM3_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA03__PWM4_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm5: pwm5grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__PWM5_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA19__PWM6_OUT		0x01010
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b0
+			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b0
+			MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS	0x1b0b0
+			MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS	0x1b0b0
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B	0x17099
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x1f099
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10099
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17099
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17099
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17099
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17099
+			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17099
+			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17099
+			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17099
+			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17099
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x100b9
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x170b9
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_vbus: vbus0grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x030b0
+		>;
+	};
+
+	pinctrl_wifi_npd: wifigrp {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x03020
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_hog>;
+
+	pinctrl_snvs_hog: snvs-hog-grp {
+		fsl,pins = <
+			/* Digital outputs */
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x00020
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x00020
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x00020
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x00020
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x00020
+
+			/* Digital outputs fault feedback */
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17000
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17000
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x17000
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x17000
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x17000
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-bl.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-bl.dts
new file mode 100644
index 0000000000000..fa016465cdbc2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-bl.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6ull-kontron-sl.dtsi"
+#include "imx6ul-kontron-bl-common.dtsi"
+
+/ {
+	model = "Kontron BL i.MX6ULL (N641X S)";
+	compatible = "kontron,bl-imx6ull", "kontron,sl-imx6ull", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-sl.dtsi
new file mode 100644
index 0000000000000..93f10eb3494f5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-sl.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-kontron-sl-common.dtsi"
+
+/ {
+	model = "Kontron SL i.MX6ULL (N641X SOM)";
+	compatible = "kontron,sl-imx6ull", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx-eval.dts
new file mode 100644
index 0000000000000..79cc45728cd2d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx-eval.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linumiz
+ * Author: Parthiban Nallathambi <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-myir-mys-6ulx.dtsi"
+
+/ {
+	model = "MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND";
+	compatible = "myir,imx6ull-mys-6ulx-eval", "fsl,imx6ull";
+};
+
+&gpmi {
+	fsl,use-minimum-ecc;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi
new file mode 100644
index 0000000000000..d03694feaf5c4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linumiz
+ * Author: Parthiban Nallathambi <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "MYiR MYS-6ULX Single Board Computer";
+	compatible = "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_vdd_5v: regulator-vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vdd_5v>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_vdd_3v3>;
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	vmmc-supply = <&reg_vdd_3v3>;
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-opos6ul.dtsi
new file mode 100644
index 0000000000000..155f941f2811d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-opos6ul.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2019 Armadeus Systems <support@armadeus.com>
+
+#include "imx6ull.dtsi"
+#include "imx6ul-imx6ull-opos6ul.dtsi"
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-opos6uldev.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-opos6uldev.dts
new file mode 100644
index 0000000000000..198fdb72641bb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-opos6uldev.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2019 Armadeus Systems <support@armadeus.com>
+
+/dts-v1/;
+#include "imx6ull-opos6ul.dtsi"
+#include "imx6ul-imx6ull-opos6uldev.dtsi"
+
+/ {
+	model = "Armadeus Systems OPOS6UL SoM (i.MX6ULL) on OPOS6ULDev board";
+	compatible = "armadeus,imx6ull-opos6uldev", "armadeus,imx6ull-opos6ul", "fsl,imx6ull";
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tamper_gpios>;
+
+	pinctrl_tamper_gpios: tampergpiosgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x0b0b0
+		>;
+	};
+
+	pinctrl_usbotg2_vbus: usbotg2vbusgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_w1: w1grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x0b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-phycore-som.dtsi
new file mode 100644
index 0000000000000..56cd16e5a77fe
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-phycore-som.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX6 ULL";
+	compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&iomuxc {
+	/delete-node/ gpioledssomgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-emmc.dts
new file mode 100644
index 0000000000000..8e2a4c5d77650
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-emmc.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ull-phytec-segin-peb-av-02.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC";
+	compatible = "phytec,imx6ull-pbacd10-emmc", "phytec,imx6ull-pbacd10",
+		     "phytec,imx6ull-pcl063","fsl,imx6ull";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&tlv320 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&reg_can1_en {
+	status = "okay";
+};
+
+&reg_sound_1v8 {
+	status = "okay";
+};
+
+&reg_sound_3v3 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-nand.dts
new file mode 100644
index 0000000000000..1d7362b5ac91b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-nand.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ull-phytec-segin-peb-av-02.dtsi"
+#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND";
+	compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&tlv320 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&reg_can1_en {
+	status = "okay";
+};
+
+&reg_sound_1v8 {
+	status = "okay";
+};
+
+&reg_sound_3v3 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-lc-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-lc-rdk-nand.dts
new file mode 100644
index 0000000000000..4bcbae024d8d4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-lc-rdk-nand.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Low Cost with NAND";
+	compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-av-02.dtsi
new file mode 100644
index 0000000000000..06bb7f3277803
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-av-02.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin-peb-av-02.dtsi"
+
+&iomuxc {
+	/delete-node/ edtft5406grp;
+	/delete-node/ stmpegrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_edt_ft5406: edtft5406grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-eval-01.dtsi
new file mode 100644
index 0000000000000..ff08d95a1aa2b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-eval-01.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+
+&iomuxc {
+	/delete-node/ gpio_keysgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x79
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-wlbt-05.dtsi
new file mode 100644
index 0000000000000..df25814a33719
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-wlbt-05.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi"
+
+&iomuxc {
+	/delete-node/ wlgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_wl: wlgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x3031
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin.dtsi
new file mode 100644
index 0000000000000..e287a0453b5f9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL";
+	compatible = "phytec,imx6ull-pbacd-10", "phytec,imx6ull-pcl063","fsl,imx6ull";
+};
+
+&iomuxc {
+	/delete-node/ flexcan1engrp;
+	/delete-node/ rtcintgrp;
+};
+
+&iomuxc_snvs {
+	princtrl_flexcan1_en: flexcan1engrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-emmc.dts
new file mode 100644
index 0000000000000..14adb87da9111
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-emmc.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull-phytec-tauri.dtsi"
+
+/ {
+	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+	compatible = "phytec,imx6ull-phygate-tauri",
+		     "phytec,imx6ull-phygate-tauri-emmc",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+/* EMMC-Version */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-nand.dts
new file mode 100644
index 0000000000000..ae396ac63443b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-nand.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull-phytec-tauri.dtsi"
+
+/ {
+	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+	compatible = "phytec,imx6ull-phygate-tauri",
+		     "phytec,imx6ull-phygate-tauri-nand",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+/* NAND-Version */
+&gpmi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
new file mode 100644
index 0000000000000..ea627638e40cf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+
+/ {
+
+	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+	compatible = "phytec,imx6ull-phygate-tauri",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-key";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key {
+			label = "KEY-A";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			wakeup-source;
+		};
+	};
+
+	reg_adc1_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_s25fl064_hold: regulator-s25fl064-hold {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_s25fl064_hold>;
+		compatible = "regulator-fixed";
+		regulator-name = "s25fl064_hold";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_hub_vbus: regulator-hub-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhubpwr>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_hub_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1pwr>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>,
+			    <&pinctrl_user_leds_snvs>;
+
+		user-led1 {
+			label = "yellow";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "off";
+		};
+
+		user-led2 {
+			label = "red";
+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "off";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>,
+		    <&pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>,
+		   <&gpio3 10 GPIO_ACTIVE_LOW>,
+		   <&gpio3 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm_tis: tpm@1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		compatible = "tcg,tpm_tis-spi";
+		reg = <1>;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	s25fl064: flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = " jedec,spi-nor";
+		reg = <2>;
+		spi-max-frequency = <40000000>;
+		m25p,fast-read;
+		status = "disabled";
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	dmas = <&sdma 7 8 0>,
+	       <&sdma 8 8 0>;
+	dma-names = "rx", "tx";
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp102: tmp@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tempsense>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	i2c_rtc: rtc@68 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		reg = <2>;
+		micrel,led-mode = <1>;
+		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+		clock-names = "rmii-ref";
+		status = "okay";
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* UART4 * RS485  */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* UART5 * RS232  */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_hub_vbus>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "disabled";
+};
+
+&iomuxc_snvs {
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+
+	pinctrl_tempsense: tempsensegrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
+		>;
+	};
+
+	pinctrl_usbhubpwr: usbhubpwrgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x17059
+		>;
+	};
+
+	pinctrl_user_leds_snvs: user_ledsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x79
+		>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x17059  /* nUART_MUX_RS232 */
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x17059  /* nUART_MUX_DUAL_RX_TX */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x79
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x100b1
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x100b1
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x100b1
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x10b0
+			MX6UL_PAD_LCD_DATA05__GPIO3_IO10	0x10b0
+			MX6UL_PAD_LCD_DATA06__GPIO3_IO11	0x10b0
+		>;
+	};
+
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX	0x0b0b0
+		>;
+	};
+
+	princtrl_flexcan2_en: flexcan2engrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x17059
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL	0xb0
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA	0xb0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0xb0
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA01__I2C3_SCL	0xb0
+			MX6UL_PAD_LCD_DATA00__I2C3_SDA	0xb0
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA01__GPIO3_IO06	0xb0
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0xb0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA03__I2C4_SCL	0xb0
+			MX6UL_PAD_LCD_DATA02__I2C4_SDA	0xb0
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA03__GPIO3_IO08	0xb0
+			MX6UL_PAD_LCD_DATA02__GPIO3_IO07	0xb0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__PWM3_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__PWM6_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__PWM7_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__PWM8_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_s25fl064_hold: s25fl064holdgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA12__GPIO3_IO17	0x100b1
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b1
+			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b1
+			MX6UL_PAD_LCD_HSYNC__GPIO3_IO02	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x1b0b1
+			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x80
+		>;
+	};
+
+	pinctrl_usbotg1pwr: usbotg1pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_user_leds: userledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x79
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc-snvs.h b/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc-snvs.h
new file mode 100644
index 0000000000000..54cfe72295aa4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc-snvs.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright (C) 2017 NXP
+ */
+
+#ifndef __DTS_IMX6ULL_PINFUNC_SNVS_H
+#define __DTS_IMX6ULL_PINFUNC_SNVS_H
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10                          0x0000 0x0044 0x0000 0x5 0x0
+#define MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11                          0x0004 0x0048 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00                        0x0008 0x004C 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01                        0x000C 0x0050 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02                        0x0010 0x0054 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03                        0x0014 0x0058 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04                        0x0018 0x005C 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05                        0x001C 0x0060 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06                        0x0020 0x0064 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07                        0x0024 0x0068 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08                        0x0028 0x006C 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09                        0x002C 0x0070 0x0000 0x5 0x0
+
+#endif /* __DTS_IMX6ULL_PINFUNC_SNVS_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc.h
new file mode 100644
index 0000000000000..7328d4ef8559f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6ULL_PINFUNC_H
+#define __DTS_IMX6ULL_PINFUNC_H
+
+#include "imx6ul-pinfunc.h"
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+/* signals common for i.MX6UL and i.MX6ULL */
+#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX                    0x00BC 0x0348 0x0644 0x0 0x6
+#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX                    0x00C0 0x034C 0x0644 0x0 0x7
+#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS                     0x00CC 0x0358 0x0640 0x1 0x5
+#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS                  0x00D0 0x035C 0x0640 0x1 0x6
+#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS                      0x01EC 0x0478 0x0640 0x8 0x7
+
+/* signals for i.MX6ULL only */
+#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX                    0x0084 0x0310 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX                    0x0084 0x0310 0x0644 0x9 0x4
+#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX                    0x0088 0x0314 0x0644 0x9 0x5
+#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX                    0x0088 0x0314 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS                     0x008C 0x0318 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS                     0x008C 0x0318 0x0640 0x9 0x3
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS                     0x0090 0x031C 0x0640 0x9 0x4
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS                     0x0090 0x031C 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01                  0x00B8 0x0344 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02                  0x00BC 0x0348 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03                  0x00C0 0x034C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04                    0x00C4 0x0350 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05                    0x00C8 0x0354 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06                       0x00CC 0x0358 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07                    0x00D0 0x035C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08                    0x00D4 0x0360 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09                       0x00D8 0x0364 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED                       0x00DC 0x0368 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ                        0x00E0 0x036C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08                    0x00E4 0x0370 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09                    0x00E8 0x0374 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10                       0x00EC 0x0378 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_DATA0__EPDC_SDDO11                    0x00F0 0x037C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_DATA1__EPDC_SDDO12                    0x00F4 0x0380 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_EN__EPDC_SDDO13                       0x00F8 0x0384 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_CLK__EPDC_SDDO14                      0x00FC 0x0388 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_ER__EPDC_SDDO15                       0x0100 0x038C 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_CLK__EPDC_SDCLK                            0x0104 0x0390 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_ENABLE__EPDC_SDLE                          0x0108 0x0394 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_HSYNC__EPDC_SDOE                           0x010C 0x0398 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_VSYNC__EPDC_SDCE0                          0x0110 0x039C 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_RESET__EPDC_GDOE                           0x0114 0x03A0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA00__EPDC_SDDO00                        0x0118 0x03A4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA01__EPDC_SDDO01                        0x011C 0x03A8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA02__EPDC_SDDO02                        0x0120 0x03AC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA03__EPDC_SDDO03                        0x0124 0x03B0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA04__EPDC_SDDO04                        0x0128 0x03B4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA05__EPDC_SDDO05                        0x012C 0x03B8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA06__EPDC_SDDO06                        0x0130 0x03BC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA07__EPDC_SDDO07                        0x0134 0x03C0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA14__EPDC_SDSHR                         0x0150 0x03DC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA15__EPDC_GDRL                          0x0154 0x03E0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK                         0x0158 0x03E4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP                          0x015C 0x03E8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1                         0x016C 0x03F8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02                        0x0170 0x03FC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03                        0x0174 0x0400 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2                         0x01D4 0x0460 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3                       0x01D8 0x0464 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1                        0x01DC 0x0468 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_HSYNC__ESAI_TX1                            0x01E0 0x046C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK                     0x01E4 0x0470 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK                     0x01E8 0x0474 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS                         0x01EC 0x0478 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK                        0x01F0 0x047C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
+
+#endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
new file mode 100644
index 0000000000000..3fdece5bd31f9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc2; /* eMMC */
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&pinctrl_emmc_rst>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_dcdc_3v3: regulator-dcdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "dcdc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "ldo-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_status_leds>;
+
+		led-1 {
+			function = LED_FUNCTION_BOOT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_PROGRAMMING;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_motor
+		     &pinctrl_adc_cp
+		     &pinctrl_adc_pp>;
+	vref-supply = <&vgen1_reg>;
+	status = "okay";
+};
+
+&cpu0 {
+	clock-frequency = <792000000>;
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	num-cs = <3>;
+	cs-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH
+		    &gpio3 2  GPIO_ACTIVE_HIGH
+		    &gpio3 4  GPIO_ACTIVE_HIGH>;
+};
+
+&ecspi4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	num-cs = <1>;
+	cs-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1
+		     &pinctrl_enet1_phy_rst
+		     &pinctrl_enet_mdio>;
+	phy-supply = <&reg_dcdc_3v3>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-handle = <&ethphy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy_int>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio2 7 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			max-speed = <100>;
+			smsc,disable-energy-detect;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 10 */
+			  "",
+			  "",
+			  "CP_INVERT",
+			  "",
+			  "",				/* 15 */
+			  "",
+			  "",
+			  "",
+			  "MOTOR_1_FAULT_N",
+			  "",				/* 20 */
+			  "",
+			  "ROTARY_SWITCH_1_2_N",
+			  "ROTARY_SWITCH_1_4_N",
+			  "ROTARY_SWITCH_1_8_N",
+			  "MOTOR_2_FAULT_N";		/* 25 */
+};
+
+&gpio3 {
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "EXT_GPIO",
+			  "MOTOR_1_DRIVER_IN1_N",
+			  "MOTOR_1_DRIVER_IN2",
+			  "MOTOR_2_DRIVER_IN1",
+			  "STM32_BOOT0",		/* 10 */
+			  "STM32_RST_N",
+			  "RELAY_1_ENABLE",
+			  "RELAY_2_ENABLE",
+			  "",
+			  "",				/* 15 */
+			  "QCA700X_MAINS_BOOTLOADER_N",
+			  "QCA700X_CP_RST_N",
+			  "QCA700X_CP_BOOTLOADER_N",
+			  "",
+			  "DIGITAL_OUT_1",		/* 20 */
+			  "DIGITAL_OUT_2",
+			  "DIGITAL_OUT_3",
+			  "DIGITAL_OUT_4",
+			  "DIGITAL_OUT_5",
+			  "DIGITAL_OUT_6",		/* 25 */
+			  "ROTARY_SWITCH_2_8_N",
+			  "ROTARY_SWITCH_2_4_N",
+			  "ROTARY_SWITCH_2_2_N";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic>;
+
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 10 */
+			  "",
+			  "",
+			  "BOARD_VARIANT_1",
+			  "BOARD_VARIANT_2",
+			  "BOARD_VARIANT_0",		/* 15 */
+			  "BOARD_VARIANT_3",
+			  "",
+			  "ROTARY_SWITCH_2_1_N",
+			  "",
+			  "DIGITAL_IN_5",		/* 20 */
+			  "",
+			  "",
+			  "DIGITAL_IN_6",
+			  "",
+			  "DIGITAL_IN_1",		/* 25 */
+			  "DIGITAL_IN_2",
+			  "DIGITAL_IN_4",
+			  "DIGITAL_IN_3";
+
+	pmic-int-hog {
+		gpio-hog;
+		gpios = <19 0>;
+		input;
+	};
+};
+
+&gpio5 {
+	gpio-line-names = "ROTARY_SWITCH_1_1_N",	/* 0 */
+			  "",
+			  "RELAY_2_SENSE",
+			  "RELAY_1_SENSE",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "QCA700X_MAINS_RST_N",
+			  "MOTOR_2_DRIVER_IN2",
+			  "",
+			  "CP_POSITIVE_PEAK_RST",	/* 10 */
+			  "CP_NEGATIVE_PEAK_RST";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pfuze3001: pmic@8 {
+		compatible = "fsl,pfuze3001";
+		reg = <0x08>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-name = "SW1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "SW2";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-name = "SW3";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-name = "VSNVS";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-name = "VLDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-name = "VLDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-name = "VCCSD";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-name = "V33";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-name = "VLDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-name = "VLDO4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	onewire@18 {
+		compatible = "maxim,ds2484";
+		reg = <0x18>;
+	};
+
+	accelerometer@19 {
+		compatible = "st,iis328dq", "st,h3lis331dl-accel";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accelerometer_int1_snvs>;
+		vdd-supply = <&reg_dcdc_3v3>;
+		vddio-supply = <&reg_dcdc_3v3>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_var
+		     &pinctrl_digital_input
+		     &pinctrl_digital_output
+		     &pinctrl_gpio_motor
+		     &pinctrl_hog_pins
+		     &pinctrl_rotary_switch1
+		     &pinctrl_rotary_switch2>;
+
+	pinctrl_adc_cp: adc-cpgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02            0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03            0xb0
+		>;
+	};
+
+	pinctrl_adc_motor: adc-motorgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00            0xb0
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01            0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04            0xb0
+		>;
+	};
+
+	pinctrl_adc_pp: adc-ppgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05            0xb0
+		>;
+	};
+
+	pinctrl_board_var: board-vargrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__GPIO4_IO15              0xb0
+			MX6UL_PAD_NAND_CE0_B__GPIO4_IO13            0xb0
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14            0xb0
+			MX6UL_PAD_NAND_DQS__GPIO4_IO16              0xb0
+		>;
+	};
+
+	pinctrl_digital_input: digital-inputgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25            0xb0
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26            0xb0
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28            0xb0
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27            0xb0
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20             0xb0
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23            0xb0
+		>;
+	};
+
+	pinctrl_digital_output: digital-outputgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA15__GPIO3_IO20            0x400000b0
+			MX6UL_PAD_LCD_DATA16__GPIO3_IO21            0x400000b0
+			MX6UL_PAD_LCD_DATA17__GPIO3_IO22            0x400000b0
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23            0x400000b0
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24            0x400000b0
+			MX6UL_PAD_LCD_DATA20__GPIO3_IO25            0x400000b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29         0x10b0
+			MX6UL_PAD_LCD_HSYNC__GPIO3_IO02             0xb0
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04             0xb0
+			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK        0x10b0
+			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO        0x10b0
+			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI        0x10b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15           0x10b0
+			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK       0x10b0
+			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO         0x10b0
+			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI          0x10b0
+		>;
+	};
+
+	pinctrl_emmc_rst: emmc-rstgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10              0x400010b0
+		>;
+	};
+
+	pinctrl_enet_mdio: enet-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO            0x10b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC             0x10b0
+		>;
+	};
+
+	pinctrl_enet1_phy_int: enet1-phy-intgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07           0x10b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00     0x100b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01     0x100b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN          0x100b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1      0x400000b1
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00     0xb0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01     0xb0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN          0xb0
+		>;
+	};
+
+	pinctrl_ext_uart: ext-uartgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX      0xb0
+			MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX         0xb0
+		>;
+	};
+
+	pinctrl_fan_enable: fan-enablegrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05            0x400000b0
+		>;
+	};
+
+	pinctrl_gpio_motor: gpio-motorgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA02__GPIO3_IO07            0x400000b0
+			MX6UL_PAD_LCD_DATA03__GPIO3_IO08            0x400000b0
+			MX6UL_PAD_LCD_DATA04__GPIO3_IO09            0x400000b0
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19           0xb0
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25         0xb0
+		>;
+	};
+
+	pinctrl_hog_pins: hog-pinsgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA07__GPIO3_IO12            0x400000b0
+			MX6UL_PAD_LCD_DATA08__GPIO3_IO13            0x400000b0
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13              0x400070a0
+			MX6UL_PAD_LCD_DATA05__GPIO3_IO10            0x400000b0
+			MX6UL_PAD_LCD_DATA06__GPIO3_IO11            0x400000b0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA           0x400008b0
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL           0x400008b0
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21         0x400008b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20         0x400008b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT        0x70b1
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19             0xb0
+		>;
+	};
+
+	pinctrl_pwm_cp: pinctrl-pwm-cpgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__PWM8_OUT             0x60a0
+		>;
+	};
+
+	pinctrl_pwm_digital_input_ref: pwm-digital-input-refgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__PWM2_OUT              0xb0
+		>;
+	};
+
+	pinctrl_pwm_fan: pwm-fangrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__PWM7_OUT                0x60a0
+		>;
+	};
+
+	pinctrl_qca700x_cp_btld: qca700x-cp-btldgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA13__GPIO3_IO18            0x400000b0
+		>;
+	};
+
+	pinctrl_qca700x_cp_int: qca700x-cp-intgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_DATA1__GPIO2_IO19             0x10b0
+		>;
+	};
+
+	pinctrl_qca700x_cp_rst: qca700x-cp-rstgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA12__GPIO3_IO17            0x400000b0
+		>;
+	};
+
+	pinctrl_qca700x_mains_btld: qca700x-mains-btldgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA11__GPIO3_IO16            0x400000b0
+		>;
+	};
+
+	pinctrl_rotary_switch1: rotary-switch1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__GPIO1_IO22           0xb0
+			MX6UL_PAD_UART2_RTS_B__GPIO1_IO23           0xb0
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24         0xb0
+		>;
+	};
+
+	pinctrl_rotary_switch2: rotary-switch2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18            0xb0
+			MX6UL_PAD_LCD_DATA23__GPIO3_IO28            0xb0
+			MX6UL_PAD_LCD_DATA22__GPIO3_IO27            0xb0
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26            0xb0
+		>;
+	};
+
+	pinctrl_rs485_1: rs485-1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18           0xb0
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX       0xb0
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX       0xb0
+		>;
+	};
+
+	pinctrl_rs485_2: rs485-2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24            0x10b0
+			MX6UL_PAD_CSI_DATA01__UART5_DCE_RX          0x10b0
+			MX6UL_PAD_CSI_DATA00__UART5_DCE_TX          0x10b0
+		>;
+	};
+
+	pinctrl_status_leds: status-ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA09__GPIO3_IO14            0xb0
+			MX6UL_PAD_LCD_DATA10__GPIO3_IO15            0xb0
+			MX6UL_PAD_LCD_DATA14__GPIO3_IO19            0xb0
+		>;
+	};
+
+	pinctrl_stm32: stm32grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX      0x10b0
+			MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX      0x10b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DTE_RX             0xb0
+			MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX          0xb0
+		>;
+	};
+
+	pinctrl_usb: usbgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USB_OTG1_OC              0x70b0
+			MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID         0x70b0
+		>;
+	};
+
+	pinctrl_usb_pwr: usb-pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USB_OTG1_PWR             0xb0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x7071
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x7071
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x7071
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x7071
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x7071
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x7071
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x7071
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x7071
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x7071
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x7071
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x70b1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x70b1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x70b1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x70b1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x70b1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x70b1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x70b1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x70b1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x70b1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x70b1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x70f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x70f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x70f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x70f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x70f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x70f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x70f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x70f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x70f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x70f1
+		>;
+	};
+
+	pinctrl_wdog2: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B           0x10b0
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default_snvs";
+	pinctrl-0 = <&pinctrl_cp_peak_snvs
+		     &pinctrl_gpio_motor_snvs
+		     &pinctrl_relay_sense_snvs
+		     &pinctrl_rotary_switch1_snvs>;
+
+	pinctrl_accelerometer_int1_snvs: accelerometer-int1-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05         0x130a0
+		>;
+	};
+
+	pinctrl_cp_peak_snvs: cp-peak-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10           0x130a0
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11           0x130a0
+		>;
+	};
+
+	pinctrl_enet1_phy_rst: enet1-phy-rstgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06         0x100a0
+		>;
+	};
+
+	pinctrl_fan_sense_snvs: fan-sense-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01         0x100a0
+		>;
+	};
+
+	pinctrl_gpio_motor_snvs: gpio-motor-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08         0x110a0
+		>;
+	};
+
+	pinctrl_qca700x_mains_int: qca700x-mains-intgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09         0x130a0
+		>;
+	};
+
+	pinctrl_qca700x_mains_rst: qca700x-mains-rstgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07         0x400100a0
+		>;
+	};
+
+	pinctrl_relay_sense_snvs: relay-sense-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03         0x100a0
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02         0x100a0
+		>;
+	};
+
+	pinctrl_rotary_switch1_snvs: rotary-switch1-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00         0x110a0
+		>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_digital_input_ref>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_cp>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rs485_1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rs485_2>;
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_stm32>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ext_uart>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb
+		     &pinctrl_usb_pwr>;
+	dr_mode = "host";
+	power-active-high;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-cal-45-dn-ohms = <35>;
+	fsl,tx-cal-45-dp-ohms = <35>;
+};
+
+&usbphy2 {
+	fsl,tx-cal-45-dn-ohms = <35>;
+	fsl,tx-cal-45-dp-ohms = <35>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&sw2_reg>;
+	vqmmc-supply = <&reg_1v8>;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog2>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dts
new file mode 100644
index 0000000000000..67007ce383e3c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Master";
+	compatible = "chargebyte,imx6ull-tarragon-master", "fsl,imx6ull";
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_sense_snvs>;
+		fan-supply = <&reg_fan>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	reg_fan: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "fan-supply";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_enable>;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&ecspi4 {
+	status = "okay";
+
+	qca700x_mains: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_mains_int
+			     &pinctrl_qca700x_mains_rst
+			     &pinctrl_qca700x_mains_btld>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_fan>;
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-micro.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-micro.dts
new file mode 100644
index 0000000000000..e471c2005bee9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-micro.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Micro";
+	compatible = "chargebyte,imx6ull-tarragon-micro", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slave.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slave.dts
new file mode 100644
index 0000000000000..cee223b5f8e1c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slave.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Slave";
+	compatible = "chargebyte,imx6ull-tarragon-slave", "fsl,imx6ull";
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slavext.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slavext.dts
new file mode 100644
index 0000000000000..7fd53b7a43723
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slavext.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon SlaveXT";
+	compatible = "chargebyte,imx6ull-tarragon-slavext", "fsl,imx6ull";
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_sense_snvs>;
+		fan-supply = <&reg_fan>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	reg_fan: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "fan-supply";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_enable>;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_fan>;
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2-mba6ulx.dts
new file mode 100644
index 0000000000000..e593b7036fc71
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ull-tqma6ull2.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6ULL2 SoM on MBa6ULx board";
+	compatible = "tq,imx6ull-tqma6ull2-mba6ulx", "tq,imx6ull-tqma6ull2", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2.dtsi
new file mode 100644
index 0000000000000..8541cb3f3b3e2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulx-common.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6ULL2 SoM";
+	compatible = "tq,imx6ull-tqma6ull2", "fsl,imx6ull";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+	/* Errata ERR010450 Workaround */
+	max-frequency = <99000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017031
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017039
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017039
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017039
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017039
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017039
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017039
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017039
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017039
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017039
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l-mba6ulx.dts
new file mode 100644
index 0000000000000..33437aae98224
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ull-tqma6ull2l.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ Systems TQMa6ULL2L SoM on MBa6ULx board";
+	compatible = "tq,imx6ull-tqma6ull2l-mba6ulx", "tq,imx6ull-tqma6ull2l", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l.dtsi
new file mode 100644
index 0000000000000..be593d47e3b1e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulxl-common.dtsi"
+
+/ {
+	model = "TQ Systems TQMa6ULL2L SoM";
+	compatible = "tq,imx6ull-tqma6ull2l", "fsl,imx6ull";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+	/* Errata ERR010450 Workaround */
+	max-frequency = <99000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017031
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017039
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017039
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017039
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017039
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017039
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017039
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017039
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017039
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017039
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi
new file mode 100644
index 0000000000000..2bccd45e9fc22
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+#include "imx6ul.dtsi"
+#include "imx6ull-pinfunc.h"
+#include "imx6ull-pinfunc-snvs.h"
+
+/* Delete UART8 in AIPS-1 (i.MX6UL specific) */
+/delete-node/ &uart8;
+/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
+/delete-node/ &crypto;
+
+&cpu0 {
+	clock-frequency = <900000000>;
+	operating-points = <
+		/* kHz	uV */
+		900000	1275000
+		792000	1225000
+		528000	1175000
+		396000	1025000
+		198000	950000
+	>;
+	fsl,soc-operating-points = <
+		/* KHz	uV */
+		900000	1250000
+		792000	1175000
+		528000	1175000
+		396000	1175000
+		198000	1175000
+	>;
+};
+
+&ocotp {
+	compatible = "fsl,imx6ull-ocotp", "syscon";
+};
+
+&pxp {
+	compatible = "fsl,imx6ull-pxp";
+	interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc1 {
+	compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
+
+&usdhc2 {
+	compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
+
+/ {
+	soc: soc {
+		aips3: bus@2200000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02200000 0x100000>;
+			ranges;
+
+			dcp: crypto@2280000 {
+				compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp";
+				reg = <0x02280000 0x4000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6ULL_CLK_DCP_CLK>;
+				clock-names = "dcp";
+			};
+
+			rngb: rng@2284000 {
+				compatible = "fsl,imx6ull-rngb", "fsl,imx25-rngb";
+				reg = <0x02284000 0x4000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_DUMMY>;
+			};
+
+			iomuxc_snvs: iomuxc-snvs@2290000 {
+				compatible = "fsl,imx6ull-iomuxc-snvs";
+				reg = <0x02290000 0x4000>;
+			};
+
+			uart8: serial@2288000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x02288000 0x4000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+					 <&clks IMX6UL_CLK_UART8_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-14x14-evk.dts
new file mode 100644
index 0000000000000..483d9732c0023
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-14x14-evk.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+/dts-v1/;
+
+#include "imx6ulz.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/delete-node/ &fec1;
+/delete-node/ &fec2;
+/delete-node/ &can1;
+/delete-node/ &can2;
+/delete-node/ &lcdif;
+/delete-node/ &tsc;
+
+/ {
+	model = "Freescale i.MX6 ULZ 14x14 EVK Board";
+	compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+	/delete-node/ panel;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
new file mode 100644
index 0000000000000..c92e4e2f6ab9c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx6ulz.dtsi"
+
+/ {
+	model = "BSH SMM M2";
+	compatible = "bsh,imx6ulz-bsh-smm-m2", "fsl,imx6ull", "fsl,imx6ulz";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	usdhc2_pwrseq: usdhc2-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wlan>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	cap-sdio-irq;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio1>;
+		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&wdog1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b099
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b099
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x79		/* BT_REG_ON */
+			MX6UL_PAD_SD1_CLK__GPIO2_IO17		0x100b1		/* BT_DEV_WAKE out */
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0		/* BT_HOST_WAKE in */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10059
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_SD1_DATA3__GPIO2_IO21		0x79		/* WL_REG_ON */
+			MX6UL_PAD_UART2_CTS_B__GPIO1_IO22	0x100b1		/* WL_DEV_WAKE - WiFi_GPIO_4 - WiFi FW UART */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x1b0b1		/* WL_HOST_WAKE - WIFI_GPIO_0 - OOB IRQ */
+			MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT	0x4001b031	/* OSC 32Khz wifi clk in */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ulz.dtsi
new file mode 100644
index 0000000000000..0b5f1a7635676
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ ethernet0;
+		/delete-property/ ethernet1;
+		/delete-property/ i2c2;
+		/delete-property/ i2c3;
+		/delete-property/ serial4;
+		/delete-property/ serial5;
+		/delete-property/ serial6;
+		/delete-property/ serial7;
+		/delete-property/ spi2;
+		/delete-property/ spi3;
+	};
+};
+
+/delete-node/ &adc1;
+/delete-node/ &ecspi3;
+/delete-node/ &ecspi4;
+/delete-node/ &epit2;
+/delete-node/ &gpt2;
+/delete-node/ &i2c3;
+/delete-node/ &i2c4;
+/delete-node/ &pwm5;
+/delete-node/ &pwm6;
+/delete-node/ &pwm7;
+/delete-node/ &pwm8;
+/delete-node/ &uart5;
+/delete-node/ &uart6;
+/delete-node/ &uart7;
+/delete-node/ &uart8;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri-aster.dtsi
new file mode 100644
index 0000000000000..01612741f792a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri-aster.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	status = "okay";
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	cs-gpios = <
+		&gpio4 11 GPIO_ACTIVE_LOW /* SODIMM 86 / regular SSPFRM as UNO_SPI_CS or  */
+		&gpio4 23 GPIO_ACTIVE_LOW /* SODIMM 65 / already muxed pinctrl_gpio2 as SPI_CE0_N */
+		&gpio4 22 GPIO_ACTIVE_LOW /* SODIMM 85 / already muxed pinctrl_gpio2 as SPI_CE1_N */
+	>;
+	status = "okay";
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC/SD */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri-eval-v3.dtsi
new file mode 100644
index 0000000000000..326440f2b4f4f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri-eval-v3.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016-2022 Toradex
+ */
+
+/ {
+	/* Fixed crystal dedicated to MCP2515. */
+	clk16m: clk16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+};
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	interrupt-parent = <&gpio1>;
+	interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 / INT */
+	pinctrl-0 = <&pinctrl_atmel_adapter>;
+	reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 / RST */
+	status = "disabled";
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	status = "okay";
+
+	mcp2515: can@0 {
+		clocks = <&clk16m>;
+		compatible = "microchip,mcp2515";
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&reg_3v3>;
+		xceiver-supply = <&reg_5v0>;
+	};
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC/SD */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris-v2.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris-v2.dtsi
new file mode 100644
index 0000000000000..b687727f956a6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris-v2.dtsi
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* SODIMM 100 */
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+		startup-delay-us = <100>;
+	};
+};
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	status = "okay";
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	status = "okay";
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * uart_b_c_on_x14_enable turns the UART transceiver for UART2 and 5 on. If one wants to
+	 * turn the transceiver off, that property has to be deleted and the gpio handled in
+	 * userspace.
+	 * The same applies to uart_a_on_x13_enable where the UART_A transceiver is turned on.
+	 */
+	uart-b-c-on-x14-enable-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+		output-high;
+	};
+};
+
+&gpio5 {
+	uart-a-on-x13-enable-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+		output-high;
+	};
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC/SD, UHS-I capable uSD slot */
+&usdhc1 {
+	cap-power-off-card;
+	/delete-property/ keep-power-in-suspend;
+	/delete-property/ no-1-8-v;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris.dtsi
new file mode 100644
index 0000000000000..6a9e5ab596915
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris.dtsi
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	interrupt-parent = <&gpio1>;
+	interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 / INT */
+	pinctrl-0 = <&pinctrl_atmel_adapter>;
+	reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 / RST */
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	status = "okay";
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * uart25 turns the UART transceiver for UART2 and 5 on. If one wants to turn the
+	 * transceiver off, that property has to be deleted and the gpio handled in userspace.
+	 * The same applies to uart1_tx_on where the UART1 transceiver is turned on.
+	 */
+	uart25-tx-on-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+		output-high;
+	};
+};
+
+&gpio5 {
+	uart1-tx-on-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+		output-high;
+	};
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC/SD */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi
new file mode 100644
index 0000000000000..104580d51d745
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi
@@ -0,0 +1,1142 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016-2022 Toradex
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	backlight: backlight {
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		compatible = "pwm-backlight";
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	extcon_usbc_det: usbc-det {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	panel_dpi: panel-dpi {
+		backlight = <&backlight>;
+		compatible = "edt,et057090dhu";
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V";
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "5V";
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3";
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_AVDD_AUDIO";
+	};
+
+	reg_module_3v3_eth: regulator-module-3v3-eth {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <200000>;
+		regulator-name = "+V3.3_ETH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		startup-delay-us = <200000>;
+		vin-supply = <&reg_LDO1>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VCC_USB[1-4]";
+		vin-supply = <&reg_5v0>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "imx7-sgtl5000";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+			sound-dai = <&codec>;
+		};
+	};
+};
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	vref-supply = <&reg_DCDC3>;
+};
+
+/* ADC2 is not available as it conflicts with AD7879 resistive touchscreen. */
+
+&cpu0 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* SODIMM 86 / SSPFRM */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>;
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		 <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		 <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+		 <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
+	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_module_3v3_eth>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet1>;
+	pinctrl-1 = <&pinctrl_enet1_sleep>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Micrel KSZ8041RNL */
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			micrel,led-mode = <0>;
+			reg = <0>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_135",
+			  "SODIMM_22",
+			  "",
+			  "",
+			  "SODIMM_37",
+			  "SODIMM_29",
+			  "SODIMM_59",
+			  "SODIMM_28",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "",
+			  "",
+			  "SODIMM_188",
+			  "SODIMM_178";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_111",
+			  "SODIMM_113",
+			  "SODIMM_115",
+			  "SODIMM_117",
+			  "SODIMM_119",
+			  "SODIMM_121",
+			  "SODIMM_123",
+			  "SODIMM_125",
+			  "SODIMM_91",
+			  "SODIMM_89",
+			  "SODIMM_105",
+			  "SODIMM_152",
+			  "SODIMM_150",
+			  "SODIMM_95",
+			  "SODIMM_126",
+			  "SODIMM_107",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "SODIMM_118",
+			  "SODIMM_120",
+			  "SODIMM_122",
+			  "SODIMM_124",
+			  "SODIMM_127",
+			  "SODIMM_130",
+			  "SODIMM_132",
+			  "SODIMM_134",
+			  "SODIMM_133",
+			  "SODIMM_104",
+			  "SODIMM_106",
+			  "SODIMM_110",
+			  "SODIMM_112",
+			  "SODIMM_128";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "SODIMM_93",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_136",
+			  "SODIMM_138",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_146";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_35",
+			  "SODIMM_33",
+			  "SODIMM_38",
+			  "SODIMM_36",
+			  "SODIMM_21",
+			  "SODIMM_19",
+			  "SODIMM_131",
+			  "SODIMM_129",
+			  "SODIMM_90",
+			  "SODIMM_92",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_96",
+			  "SODIMM_75",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_67",
+			  "SODIMM_59",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_69",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_47",
+			  "SODIMM_190",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53",
+			  "",
+			  "",
+			  "SODIMM_98",
+			  "SODIMM_184",
+			  "SODIMM_186",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_100",
+			  "SODIMM_102";
+};
+
+&gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_169",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_77",
+			  "SODIMM_24",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_32",
+			  "SODIMM_34";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "SODIMM_63",
+			  "SODIMM_55",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_196",
+			  "SODIMM_194",
+			  "",
+			  "SODIMM_99",
+			  "",
+			  "",
+			  "SODIMM_137";
+};
+
+/* NAND on such SKUs */
+&gpmi {
+	fsl,use-minimum-ecc;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+};
+
+/* On-module Power I2C */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>;
+	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		reg = <0xa>;
+		VDDA-supply = <&reg_module_3v3_avdd>;
+		VDDD-supply = <&reg_DCDC3>;
+		VDDIO-supply = <&reg_module_3v3>;
+	};
+
+	ad7879_ts: touchscreen@2c {
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,resistance-plate-x = <120>;
+		compatible = "adi,ad7879-1";
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x2c>;
+		touchscreen-max-pressure = <4096>;
+		status = "disabled";
+	};
+
+	pmic@33 {
+		compatible = "ricoh,rn5t567";
+		reg = <0x33>;
+
+		regulators {
+			reg_DCDC1: DCDC1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1000000>;
+				regulator-name = "+V1.0_SOC";
+			};
+
+			reg_DCDC2: DCDC2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <975000>;
+				regulator-name = "+V1.1_ARM";
+			};
+
+			reg_DCDC3: DCDC3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8";
+			};
+
+			reg_DCDC4: DCDC4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1350000>;
+				regulator-min-microvolt = <1350000>;
+				regulator-name = "+V1.35_DRAM";
+			};
+
+			reg_LDO1: LDO1 {
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "PWR_EN_+V3.3_ETH";
+			};
+
+			reg_LDO2: LDO2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8_SD";
+			};
+
+			reg_LDO3: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "PWR_EN_+V3.3_LPSR";
+			};
+
+			reg_LDO4: LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8_LPSR";
+			};
+
+			reg_LDO5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "PWR_EN_+V3.3";
+			};
+		};
+	};
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_recovery>;
+	scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	/* Atmel maxtouch controller */
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		interrupt-parent = <&gpio2>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;        /* SODIMM 107 / INT */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_atmel_connector>;
+		reg = <0x4a>;
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;      /* SODIMM 106 / RST */
+		status = "disabled";
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+		status = "disabled";
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_VIDEO_POST_DIV>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	status = "disabled";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_1p0d {
+	vin-supply = <&reg_DCDC3>; /* VDDA_1P8_IN */
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
+	uart-has-rtscts;
+};
+
+/* Colibri UART_B */
+&uart2 {
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+/* Colibri UART_C */
+&uart3 {
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	dr_mode = "otg";
+	extcon = <0>, <&extcon_usbc_det>;
+};
+
+/* Colibri MMC/SD */
+&usdhc1 {
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-1-8-v;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_cd_usdhc1_sleep>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_LDO2>;
+	wakeup-source;
+};
+
+/* eMMC on 1GB (eMMC) SKUs */
+&usdhc3 {
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	sdhci-caps-mask = <0x80000000 0x0>;
+	vmmc-supply = <&reg_module_3v3>;
+	vqmmc-supply = <&reg_DCDC3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
+
+	/*
+	 * Atmel MXT touchsceen + Capacitive Touch Adapter
+	 * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3.
+	 * Don't use them simultaneously.
+	 */
+	pinctrl_atmel_adapter: atmeladaptergrp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74 /* SODIMM 28 / INT */
+			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
+		>;
+	};
+
+	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+	pinctrl_atmel_connector: atmelconnectorgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 / RST */
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 / INT */
+		>;
+	};
+
+	pinctrl_can_int: canintgrp {
+		fsl,pins = <
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2 /* SODIMM 90 */
+			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2 /* SODIMM 92 */
+			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2 /* SODIMM 88 */
+		>;
+	};
+
+	pinctrl_ecspi3_cs: ecspi3csgrp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14 /* SODIMM 86 */
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x73
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x73
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x73
+			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x73
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
+		>;
+	};
+
+	pinctrl_enet1_sleep: enet1-sleepgrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0		0x0
+			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1		0x0
+			MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5		0x0
+			MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4		0x0
+			MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6		0x0
+			MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7		0x0
+			MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10		0x0
+			MX7D_PAD_GPIO1_IO12__GPIO1_IO12			0x0
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9			0x0
+			MX7D_PAD_SD2_WP__GPIO5_IO10			0x0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX	0x79 /* SODIMM 63 */
+			MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX	0x79 /* SODIMM 55 */
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x79 /* SODIMM 188 */
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x79 /* SODIMM 178 */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14 /* SODIMM 117 */
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14 /* SODIMM 119 */
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14 /* SODIMM 121 */
+			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14 /* SODIMM 123 */
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14 /* SODIMM 125 */
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x74 /* SODIMM 91 */
+			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x14 /* SODIMM 89 */
+			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x74 /* SODIMM 105 */
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x14 /* SODIMM 152 */
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14 /* SODIMM 150 */
+			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x14 /* SODIMM 126 */
+			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x14 /* SODIMM 132 */
+			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x14 /* SODIMM 134 */
+			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x14 /* SODIMM 133 */
+			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
+			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x14 /* SODIMM 128 */
+			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x14 /* SODIMM 122 */
+			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x14 /* SODIMM 124 */
+			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x14 /* SODIMM 127 */
+			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x14 /* SODIMM 130 */
+			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
+			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x14 /* SODIMM 116 */
+			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x14 /* SODIMM 118 */
+			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x14 /* SODIMM 120 */
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
+			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
+			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x14 /* SODIMM 169 */
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x14 /* SODIMM 77 */
+			MX7D_PAD_SD2_CLK__GPIO5_IO12		0x14 /* SODIMM 184 */
+			MX7D_PAD_SD2_CMD__GPIO5_IO13		0x14 /* SODIMM 186 */
+			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
+			MX7D_PAD_UART3_RTS_B__GPIO4_IO6		0x14 /* SODIMM 131 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp { /* On X22 Camera interface */
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_MISO__GPIO4_IO18	0x14 /* SODIMM 79 */
+			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x14 /* SODIMM 103 */
+			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x14 /* SODIMM 101 */
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19		0x14 /* SODIMM 97 */
+			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x14 /* SODIMM 85 */
+			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x14 /* SODIMM 65 */
+			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x14 /* SODIMM 81 */
+			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x14 /* SODIMM 94 */
+			MX7D_PAD_I2C4_SCL__GPIO4_IO14		0x14 /* SODIMM 96 */
+			MX7D_PAD_I2C4_SDA__GPIO4_IO15		0x14 /* SODIMM 75 */
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x74 /* SODIMM 69 */
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14 /* SODIMM 98 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp { /* LCD 18-23 */
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA18__GPIO3_IO23		0x14 /* SODIMM 136 */
+			MX7D_PAD_LCD_DATA19__GPIO3_IO24		0x14 /* SODIMM 138 */
+			MX7D_PAD_LCD_DATA20__GPIO3_IO25		0x14 /* SODIMM 140 */
+			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x14 /* SODIMM 142 */
+			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x74 /* SODIMM 144 */
+			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x74 /* SODIMM 146 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp { /* Alternatively CAN2 */
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x14 /* SODIMM 188 */
+			MX7D_PAD_GPIO1_IO15__GPIO1_IO15		0x14 /* SODIMM 178 */
+		>;
+	};
+
+	pinctrl_gpio7: gpio7grp { /* Alternatively CAN1 */
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x14 /* SODIMM 63 */
+			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x14 /* SODIMM 55 */
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x14 /* SODIMM 71 */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	0x71
+			MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	0x74
+			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
+			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
+			MX7D_PAD_SD3_DATA0__NAND_DATA00		0x71
+			MX7D_PAD_SD3_DATA1__NAND_DATA01		0x71
+			MX7D_PAD_SD3_DATA2__NAND_DATA02		0x71
+			MX7D_PAD_SD3_DATA3__NAND_DATA03		0x71
+			MX7D_PAD_SD3_DATA4__NAND_DATA04		0x71
+			MX7D_PAD_SD3_DATA5__NAND_DATA05		0x71
+			MX7D_PAD_SD3_DATA6__NAND_DATA06		0x71
+			MX7D_PAD_SD3_DATA7__NAND_DATA07		0x71
+			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
+			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
+		>;
+	};
+
+	pinctrl_i2c1_int: i2c1intgrp { /* PMIC / TOUCH */
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x79
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL	0x4000007f /* SODIMM 196 */
+			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f /* SODIMM 194 */
+		>;
+	};
+
+	pinctrl_i2c4_recovery: i2c4-recoverygrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8	0x4000007f
+			MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9	0x4000007f
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79 /* SODIMM 76 */
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79 /* SODIMM 70 */
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79 /* SODIMM 60 */
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79 /* SODIMM 58 */
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79 /* SODIMM 78 */
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79 /* SODIMM 72 */
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79 /* SODIMM 80 */
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79 /* SODIMM 46 */
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79 /* SODIMM 62 */
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79 /* SODIMM 48 */
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79 /* SODIMM 74 */
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79 /* SODIMM 50 */
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79 /* SODIMM 52 */
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79 /* SODIMM 54 */
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79 /* SODIMM 66 */
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79 /* SODIMM 64 */
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79 /* SODIMM 57 */
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79 /* SODIMM 61 */
+		>;
+	};
+
+	pinctrl_lcdif_dat_24: lcdifdat24grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79 /* SODIMM 136 */
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79 /* SODIMM 138 */
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79 /* SODIMM 140 */
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79 /* SODIMM 142 */
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79 /* SODIMM 144 */
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79 /* SODIMM 146 */
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79 /* SODIMM 56 */
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79 /* SODIMM 44 */
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79 /* SODIMM 68 */
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79 /* SODIMM 82 */
+		>;
+	};
+
+	pinctrl_lvds_transceiver: lvdstx {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2     0x14 /* SODIMM 63 */
+			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3     0x74 /* SODIMM 55 */
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11    0x14 /* SODIMM 99 */
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13        0x14 /* SODIMM 95 */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x4  /* SODIMM 59 */
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT		0x79 /* SODIMM 59 */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x79 /* SODIMM 28 */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT		0x79 /* SODIMM 30 */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x4  /* SODIMM 67 */
+			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x79 /* SODIMM 67 */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS	0x79 /* SODIMM 25 */
+			MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS	0x79 /* SODIMM 27 */
+			MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX	0x79 /* SODIMM 35 */
+			MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX	0x79 /* SODIMM 33 */
+		>;
+	};
+
+	pinctrl_uart1_ctrl1: uart1ctrl1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA0__GPIO5_IO14		0x14 /* SODIMM 23 / DTR */
+			MX7D_PAD_SD2_DATA1__GPIO5_IO15		0x14 /* SODIMM 31 / DCD */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS	0x79 /* SODIMM 32 / CTS */
+			MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS	0x79 /* SODIMM 34 / RTS */
+			MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX	0x79 /* SODIMM 38 */
+			MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX	0x79 /* SODIMM 36 */
+		>;
+	};
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX	0x79 /* SODIMM 21 */
+			MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX	0x79 /* SODIMM 19 */
+		>;
+	};
+
+	pinctrl_usbc_det: usbcdetgrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x14 /* SODIMM 137 / USBC_DET */
+		>;
+	};
+
+	pinctrl_usbh_reg: usbhreggrp {
+		fsl,pins = <
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14 /* SODIMM 129 / USBH_PEN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19 /* SODIMM 47 */
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59 /* SODIMM 190 */
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59 /* SODIMM 192 */
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59 /* SODIMM 49 */
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59 /* SODIMM 51 */
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59 /* SODIMM 53 */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
+		>;
+	};
+
+	/* Avoid backfeeding with removed card power. */
+	pinctrl_usdhc1_sleep: usdhc1-slpgrp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x10
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x10
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x10
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x10
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x10
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x10
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
+			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+		>;
+	};
+
+	pinctrl_sai1_mclk: sai1mclkgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_lpsr>;
+
+	pinctrl_cd_usdhc1: cdusdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59 /* SODIMM 43 / MMC_CD */
+		>;
+	};
+
+	pinctrl_cd_usdhc1_sleep: cdusdhc1-slpgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x0
+		>;
+	};
+
+	pinctrl_gpio_lpsr: gpiolpsrgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x59 /* SODIMM 135 */
+			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x59 /* SODIMM 22 */
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeysgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x19 /* SODIMM 45 / WAKE_UP */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL	0x4000007f
+			MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c1_recovery: i2c1-recoverygrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x4000007f
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x4000007f
+		>;
+	};
+
+	pinctrl_uart1_ctrl2: uart1ctrl2grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14 /* SODIMM 37 / RI */
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x14 /* SODIMM 29 / DSR */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
new file mode 100644
index 0000000000000..3df6dff7734ae
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ-Systems MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ *
+ * Note: This file does not include nodes for all peripheral devices.
+ * As device driver coverage increases additional nodes can be added.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc1;
+		/delete-property/ mmc2;
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	gpio_buttons: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			/* #SWITCH_A */
+			label = "S11";
+			linux,code = <KEY_1>;
+			gpios = <&pca9555 13 GPIO_ACTIVE_LOW>;
+		};
+
+		button-1 {
+			/* #SWITCH_B */
+			label = "S12";
+			linux,code = <KEY_2>;
+			gpios = <&pca9555 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-2 {
+			/* #SWITCH_C */
+			label = "S13";
+			linux,code = <KEY_3>;
+			gpios = <&pca9555 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_SD1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_fec1_pwdn: regulator-fec1-pwdn {
+		compatible = "regulator-fixed";
+		regulator-name = "PWDN_FEC1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_fec2_pwdn: regulator-fec2-pwdn {
+		compatible = "regulator-fixed";
+		regulator-name = "PWDN_FEC2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_USBOTG1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_USBOTG2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mba_12v0: regulator-mba-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC12V0_MBA7";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pca9555 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds_transmitter: regulator-lvds-transmitter {
+		compatible = "regulator-fixed";
+		regulator-name = "#SHTDN_LVDS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8_REF";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&sw2_reg>;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "imx-audio-tlv320aic32x4";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic32x4>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>,
+		   <&gpio4 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-supply = <&reg_fec1_pwdn>;
+	phy-handle = <&ethphy1_0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1_0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uboot@0 {
+			label = "U-Boot";
+			reg = <0x0 0xd0000>;
+		};
+
+		env1@d0000 {
+			label = "ENV1";
+			reg = <0xd0000 0x10000>;
+		};
+
+		env2@e0000 {
+			label = "ENV2";
+			reg = <0xe0000 0x10000>;
+		};
+
+		dtb@f0000 {
+			label = "DTB";
+			reg = <0xf0000 0x10000>;
+		};
+
+		linux@100000 {
+			label = "Linux";
+			reg = <0x100000 0x700000>;
+		};
+
+		rootfs@800000 {
+			label = "RootFS";
+			reg = <0x800000 0x3800000>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		clock-names = "mclk";
+		ldoin-supply = <&reg_audio_3v3>;
+		iov-supply = <&reg_audio_3v3>;
+	};
+
+	pca9555: gpio-expander@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9555>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_mba7_1>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO		0x7c
+			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI		0x74
+			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK		0x74
+			MX7D_PAD_UART1_RX_DATA__GPIO4_IO0		0x74
+			MX7D_PAD_UART1_TX_DATA__GPIO4_IO1		0x74
+			MX7D_PAD_UART2_RX_DATA__GPIO4_IO2		0x74
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c
+			MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74
+			MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74
+			MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0			0x74
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x02
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x00
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x71
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x71
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x71
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x79
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x79
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x79
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x79
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x79
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79
+			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
+			MX7D_PAD_ENET1_COL__GPIO7_IO15		0x40000070
+			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x40000078
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x5a
+			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x52
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x5a
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x52
+		>;
+	};
+
+	pinctrl_hog_mba7_1: hogmba71grp {
+		fsl,pins = <
+			/* Limitation: WDOG2_B / WDOG2_RESET not usable */
+			MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13	0x4000007c
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x40000074
+			/* #BOOT_EN */
+			MX7D_PAD_UART2_TX_DATA__GPIO4_IO3	0x40000010
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000078
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000078
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x40000078
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x40000078
+		>;
+	};
+
+	pinctrl_pca9555: pca95550grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x78
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK		0x11
+			MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK	0x1c
+			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1c
+			MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC	0x1c
+
+			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1c
+			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x14
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x14
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x7e
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x76
+			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x76
+			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x7e
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e
+			MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76
+			MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS	0x76
+			MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS	0x7e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x7e
+			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x76
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x7d
+			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x75
+			MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x75
+			MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x7d
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA12__UART7_DCE_RX	0x7e
+			MX7D_PAD_EPDC_DATA13__UART7_DCE_TX	0x76
+			MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS	0x76
+			/* Limitation: RTS is not connected */
+			MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS	0x7e
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1grp_gpio {
+		fsl,pins = <
+			/* WP */
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x7c
+			/* CD */
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x7c
+			/* VSELECT */
+			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5e
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5e
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5e
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5e
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			/* LCD_CONTRAST */
+			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x50
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x5c
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
+		>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	over-current-active-low;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
new file mode 100644
index 0000000000000..fe42b0a468310
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 512 MB - default configuration */
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&gpio2 {
+	/* Configured as pullup by QSPI pin group */
+	qspi-reset-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "qspi-reset";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pfuze3000: pmic@8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic1>;
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	se97b: temperature-sensor-eeprom@1e {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1e>;
+		status = "okay";
+	};
+
+	/* ST M24C64 */
+	m24c64: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		status = "okay";
+	};
+
+	at24c02: eeprom@56 {
+		compatible = "atmel,24c02";
+		reg = <0x56>;
+		pagesize = <16>;
+		status = "okay";
+	};
+
+	ds1339: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA	0x40000078
+			MX7D_PAD_I2C1_SCL__I2C1_SCL	0x40000078
+		>;
+	};
+
+	pinctrl_pmic1: pmic1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x4000005C
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0	0x5A
+			MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1	0x5A
+			MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2	0x5A
+			MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3	0x5A
+			MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK	0x11
+			MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B	0x54
+			MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B	0x54
+		>;
+	};
+
+	pinctrl_qspi_reset: qspi_resetgrp {
+		fsl,pins = <
+			/* #QSPI_RESET */
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x52
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x56
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD               0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
+			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5a
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD               0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
+			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5b
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
+		>;
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
+&sdma {
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&vgen4_reg>;
+	vqmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	/*
+	 * Errata e10574:
+	 * WDOG reset needs to run with WDOG_RESET_B signal enabled.
+	 * X1-51 (WDOG1#) signal needs carrier board handling to reset
+	 * TQMa7 on X1-22 (RESET_IN#).
+	 */
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-cl-som-imx7.dts
new file mode 100644
index 0000000000000..713483c39c9d0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-cl-som-imx7.dts
@@ -0,0 +1,294 @@
+/*
+ * Support for CompuLab CL-SOM-iMX7 System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "CompuLab CL-SOM-iMX7";
+	compatible = "compulab,cl-som-imx7", "fsl,imx7d";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
+	};
+
+	reg_usb_otg1_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pca9555: pca9555@20 {
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x30
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x30
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x11
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x11
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x11
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x11
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x11
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x11
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x11
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x11
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x11
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x11
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x11
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x11
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x11
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x11
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x11
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x11
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x11
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x11
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x11
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x11
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x11
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x11
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x11
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x11
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x14 /* OTG PWREN */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-aster.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-aster.dts
new file mode 100644
index 0000000000000..00ab92e56da4d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-aster.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7d-aster",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-aster.dts
new file mode 100644
index 0000000000000..d9c7045a55ba5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-aster.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ *
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-aster",
+		     "toradex,colibri-imx7d-emmc",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-eval-v3.dts
new file mode 100644
index 0000000000000..96b599439dded
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-eval-v3.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx7d-emmc-eval-v3",
+		     "toradex,colibri-imx7d-emmc",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris-v2.dts
new file mode 100644
index 0000000000000..5eccb837b1584
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris-v2.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB on Iris V2 Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-iris-v2",
+		     "toradex,colibri-imx7d-emmc",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris.dts
new file mode 100644
index 0000000000000..ae10e8a66ff19
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB on Iris Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-iris",
+		     "toradex,colibri-imx7d-emmc",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
new file mode 100644
index 0000000000000..3740e34ef99f1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+	aliases {
+		/* Required to properly pass MAC addresses from bootloader. */
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&cpu1 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
+&gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_169",
+			  "SODIMM_157",
+			  "",
+			  "SODIMM_163",
+			  "SODIMM_77",
+			  "SODIMM_24",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_32",
+			  "SODIMM_34";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	vbus-supply = <&reg_usbh_vbus>;
+};
+
+/* eMMC */
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-eval-v3.dts
new file mode 100644
index 0000000000000..33d787617db0d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-eval-v3.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016-2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx7d-eval-v3",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris-v2.dts
new file mode 100644
index 0000000000000..afdb1d06c7f61
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris-v2.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Iris V2 Carrier Board";
+	compatible = "toradex,colibri-imx7d-iris-v2",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&gpio7 {
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris.dts
new file mode 100644
index 0000000000000..531b0b99bd5ab
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Iris Carrier Board";
+	compatible = "toradex,colibri-imx7d-iris",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-colibri.dtsi
new file mode 100644
index 0000000000000..531a45b176a1f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016-2022 Toradex
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+	aliases {
+		/* Required to properly pass MAC addresses from bootloader. */
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&cpu1 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
+/* NAND */
+&gpmi {
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usbh_vbus>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator-mfg.dts b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator-mfg.dts
new file mode 100644
index 0000000000000..a6d68165fb1e9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator-mfg.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Kamstrup OMNIA Flex Concentrator in
+ * manufacturing/debugging mode.
+ *
+ * Copyright (C) 2020 Kamstrup A/S
+ * Author: Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx7d-flex-concentrator.dts"
+
+/ {
+	model = "Kamstrup OMNIA Flex Concentrator - Manufacturing";
+	compatible = "kam,imx7d-flex-concentrator-mfg", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+};
+
+&uart4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
new file mode 100644
index 0000000000000..3a723843d5626
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Kamstrup OMNIA Flex Concentrator.
+ *
+ * Copyright (C) 2020 Kamstrup A/S
+ * Author: Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx7d-tqma7.dtsi"
+
+/* One I2C device on TQMa7 SoM is not mounted */
+/delete-node/ &ds1339;
+
+/ {
+	model = "Kamstrup OMNIA Flex Concentrator";
+	compatible = "kam,imx7d-flex-concentrator", "fsl,imx7d";
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 1024 MB - TQMa7D board configuration */
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_USBOTG2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8_REF";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&sw2_reg>;
+	};
+
+	/*
+	 * Human Machine Interface consists of 4 dual red/green LEDs.
+	 * hmi-a:green is controlled directly by the switch-mode power supply.
+	 * hmi-a:red is not used.
+	 */
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			label = "hmi-b:red:heartbeat-degraded";
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "hmi-b:green:heartbeat-running";
+			gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "hmi-c:red:mesh-error";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "hmi-c:green:mesh-activity";
+			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			label = "hmi-d:red:omnia-error";
+			gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			label = "hmi-d:green:omnia-activity";
+			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/*
+	 * Errata e10574 board restart workaround.
+	 */
+	gpio-restart {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_restart>;
+		compatible = "gpio-restart";
+		gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/*
+ * Analog signals
+ * ADC1_IN0: SMPS - 5V output monitor (voltage divider: 1/0.2806)
+ */
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pcf2127: rtc@0 {
+		compatible = "nxp,pcf2127";
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+		reset-source;
+	};
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/*
+	 * ST chip maximum SPI clock frequency is 33 MHz.
+	 *
+	 * TCG specification - Section 6.4.1 Clocking:
+	 * TPM shall support a SPI clock frequency range of 10-24 MHz.
+	 */
+	st33htph: tpm-tis@0 {
+		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	/*
+	 * MDIO bus reset is used to generate PHY device reset before
+	 * Ethernet PHY type ID auto-detection. Otherwise this communication
+	 * fails as device does not answer when recommended reset circuit
+	 * is used.
+	 */
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-delay-us = <100000>;
+		reset-post-delay-us = <500000>;
+		reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+
+		/* Microchip/Micrel KSZ8081RNB */
+		ethphy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio1>;
+			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+			reg = <1>;
+		};
+	};
+};
+
+/*
+ * Detection signals for internal USB modules.
+ * Used for robust USB plug and play handling such as USB downstream port
+ * power-cycle and USB hub reset in case of misbehaving or crashed modules.
+ *
+ * SMPS - AC input monitor based on zero crossing.
+ * Used for last gasp notification.
+ */
+&gpio3 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+	"", "", "", "", "smps-ac-monitor", "", "usb-hub-reset", "",
+	"", "", "", "", "", "", "", "",
+	"", "module-b-detection", "", "module-a-detection", "", "", "", "";
+};
+
+/*
+ * Tamper IRQ trigger timestamp reading.
+ * Used for sealed cover opened/closed notification.
+ */
+&gpio5 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+	"", "", "", "", "rtc-tamper-irq", "", "", "",
+	"", "", "", "", "", "", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_misc>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c /* X2-15 */
+			MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74 /* X2-18 */
+			MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74 /* X2-13 */
+			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23			0x74 /* X2-20 */
+			/* RTC - Tamper IRQ */
+			MX7D_PAD_SD2_CLK__GPIO5_IO12			0x3c /* X1-92 */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_CLK__ECSPI4_MISO			0x7c /* X2-72 */
+			MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI		0x74 /* X2-68 */
+			MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK			0x74 /* X2-76 */
+			MX7D_PAD_LCD_VSYNC__GPIO3_IO3			0x74 /* X2-78 */
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x03 /* X2-48 */
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x03 /* X2-46 */
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71 /* X2-53 */
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71 /* X2-55 */
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71 /* X2-61 */
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x79 /* X2-56 */
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x79 /* X2-58 */
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79 /* X2-64 */
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73 /* X2-52 */
+			/* PHY reset: SRE_FAST, DSE_X1 */
+			MX7D_PAD_ENET1_COL__GPIO7_IO15			0x00 /* X1-96 */
+			/* Clock from PHY to MAC: 100kPU */
+			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x70 /* X3-4 */
+			/* PHY interrupt: 100kPU, HYS */
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9			0x78 /* X1-80 */
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA01__GPIO3_IO6			0x14 /* X2-82 */
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28			0x14 /* X1-82 */
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x14 /* X1-84 */
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x14 /* X1-86 */
+			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31		0x14 /* X1-88 */
+			MX7D_PAD_UART2_TX_DATA__GPIO4_IO3		0x14 /* X1-90 */
+		>;
+	};
+
+	pinctrl_misc: miscgrp {
+		fsl,pins = <
+			/* Module A detection (low = present) */
+			MX7D_PAD_LCD_DATA22__GPIO3_IO27			0x7c /* X2-105 */
+			/* Module B detection (low = present) */
+			MX7D_PAD_LCD_DATA20__GPIO3_IO25			0x7c /* X2-103 */
+			/* SMPS - AC input monitor (high = failure) */
+			MX7D_PAD_LCD_DATA07__GPIO3_IO12			0x7c /* X2-88 */
+			/* USB - Hub reset */
+			MX7D_PAD_LCD_DATA09__GPIO3_IO14			0x74 /* X2-92 */
+		>;
+	};
+
+	pinctrl_restart: restartgrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x74 /* X1-94 */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e /* X3-14 */
+			MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76 /* X3-16 */
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c /* X3-11 */
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59 /* X3-9 */
+		>;
+	};
+
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	over-current-active-low;
+	dr_mode = "host";
+	status = "okay";
+};
+
+/*
+ * External watchdog feature provided by pcf2127.
+ */
+&wdog1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
new file mode 100644
index 0000000000000..32bf9fa9d00e1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Source for TQ-Systems TQMa7D board on MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx7d-tqma7.dtsi"
+#include "imx7-mba7.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa7D board on MBa7 carrier board";
+	compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-supply = <&reg_fec2_pwdn>;
+	phy-handle = <&ethphy2_0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy2_0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_mba7_1>;
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET2_MDIO			0x02
+			MX7D_PAD_SD2_WP__ENET2_MDC			0x00
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x71
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x71
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x71
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x71
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x71
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x71
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x79
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x79
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x79
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x79
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x79
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x79
+			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x40000070
+			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
+			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x40000078
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* #pcie_wake */
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x70
+			/* #pcie_rst */
+			MX7D_PAD_SD2_CLK__GPIO5_IO12			0x70
+			/* #pcie_dis */
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x70
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	/* 1.5V logically from 3.3V */
+	/* probe deferral not supported */
+	/* pcie-bus-supply = <&reg_mpcie_1v5>; */
+	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
new file mode 100644
index 0000000000000..dd8003bd1fc09
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "96Boards Meerkat96 Board";
+	compatible = "novtech,imx7d-meerkat96", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512MB */
+	};
+
+	reg_wlreg_on: regulator-wlreg-on {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlreg_on>;
+		regulator-name = "wlreg_on";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100>;
+		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "green:user1";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green:user2";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "green:user3";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "green:user4";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led5 {
+			label = "yellow:wlan";
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led6 {
+			label = "blue:bt";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7 &pinctrl_bt_gpios>;
+	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		device-wakeup-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	keep-power-in-suspend;
+	fsl,tuning-step = <2>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v;
+	broken-cd;
+	status = "okay";
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_wlreg_on>;
+	vqmmc-supply =<&reg_3p3v>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_irq>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&iomuxc {
+	pinctrl_bt_gpios: btgpiosgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x59
+			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x1f
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x59
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x59
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA	0x4000007f
+			MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX7D_PAD_LCD_RESET__LCD_RESET		0x79
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_DATA4__UART3_DCE_RX	0x79
+			MX7D_PAD_SD3_DATA5__UART3_DCE_TX	0x79
+			MX7D_PAD_SD3_DATA6__UART3_DCE_RTS	0x79
+			MX7D_PAD_SD3_DATA7__UART3_DCE_CTS	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CD_B__UART6_DCE_RX		0x79
+			MX7D_PAD_SD1_WP__UART6_DCE_TX		0x79
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX	0x79
+			MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX	0x79
+			MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS	0x79
+			MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x0D
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+		>;
+	};
+
+	pinctrl_wlan_irq: wlanirqgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14	0x19
+		>;
+	};
+
+	pinctrl_wlreg_on: wlregongrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15	0x19
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
new file mode 100644
index 0000000000000..9c6476bda4a02
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
@@ -0,0 +1,699 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX7 Nitrogen7 Board";
+	compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight-j9 {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_j9>;
+		gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	backlight_lcd: backlight-j20 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_3v3: regulator-can2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "reg_wlan";
+		startup-delay-us = <70000>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc2_pwrseq: usdhc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			reg = <4>;
+		};
+	};
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio2 15 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touch@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_tsc2004>;
+		interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+	};
+};
+
+&lcdif {
+	status = "okay";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vgen3_reg>;
+	bus-width = <4>;
+	fsl,tuning-step = <2>;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
+
+	pinctrl_hog_1: hoggrp-1 {
+		fsl,pins = <
+			MX7D_PAD_SD3_RESET_B__GPIO6_IO11	0x5d
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x7d
+			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x7d
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
+			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x71
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x71
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x71
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x71
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x11
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x11
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x11
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x71
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x11
+			MX7D_PAD_SD3_STROBE__GPIO6_IO10			0x75
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x7d
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x7d
+			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x7d
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2_rv4162: i2c2-rv4162grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x7d
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3_tsc2004: i2c3tsc2004grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x79
+			MX7D_PAD_SD2_WP__GPIO5_IO10		0x7d
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_j2: j2grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15	0x7d
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x7d
+			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x7d
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x7d
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x7d
+			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x7d
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x7d
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x7d
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x7d
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x7d
+			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x7d
+			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x7d
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x7d
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x7d
+			MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14	0x7d
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x7d
+			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x7d
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x7d
+			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x7d
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x7d
+			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x7d
+			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x7d
+			MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22	0x7d
+			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x7d
+			MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20	0x7d
+			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x7d
+			MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19	0x7d
+			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x7d
+			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x7d
+			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x7d
+			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x7d
+			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x7d
+			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x7d
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x7d
+			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x7d
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x7d
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
+			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x7d
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
+			MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
+			MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
+			MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x7d
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x75
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x75
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x59
+			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_2>;
+
+	pinctrl_hog_2: hoggrp-2 {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x7d
+			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
+		>;
+	};
+
+	pinctrl_backlight_j9: backlightj9grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x7d
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x7d
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x7d
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x14
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x75
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
new file mode 100644
index 0000000000000..fdc10563f1473
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx7d-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX7D and DWARF baseboard";
+	compatible = "technexion,imx7d-pico-dwarf", "fsl,imx7d";
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx7d-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pca9554: io-expander@25 {
+		compatible = "nxp,pca9554";
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		reg = <0x25>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pca9554 4 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&iomuxc {
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-hobbit.dts
new file mode 100644
index 0000000000000..6ad39dca70096
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-hobbit.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
+
+#include "imx7d-pico.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX7D Board using Hobbit baseboard";
+	compatible = "technexion,imx7d-pico-hobbit", "fsl,imx7d";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		};
+	};
+};
+
+&i2c1 {
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_vref_1v8>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	adc081c: adc@50 {
+		compatible = "ti,adc081c";
+		reg = <0x50>;
+		vref-supply = <&reg_3p3v>;
+	};
+};
+
+&ecspi3 {
+	ads7846@0 {
+		reg = <0>;
+		compatible = "ti,ads7846";
+		interrupt-parent = <&gpio2>;
+		interrupts = <7 0>;
+		spi-max-frequency = <1000000>;
+		pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_3p3v>;
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <4095>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <4095>;
+		ti,pressure-max = /bits/ 16 <1024>;
+		ti,x-plate-ohms = /bits/ 16 <90>;
+		ti,y-plate-ohms = /bits/ 16 <90>;
+		ti,debounce-max = /bits/ 16 <70>;
+		ti,debounce-tol = /bits/ 16 <3>;
+		ti,debounce-rep = /bits/ 16 <2>;
+		ti,settle-delay-usec = /bits/ 16 <150>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-nymph.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-nymph.dts
new file mode 100644
index 0000000000000..5afb1674e0125
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-nymph.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx7d-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX7 and NYMPH baseboard";
+	compatible = "technexion,imx7d-pico-nymph", "fsl,imx7d";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx7d-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	adc@52 {
+		compatible = "ti,adc081c";
+		reg = <0x52>;
+		vref-supply = <&reg_2p5v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts
new file mode 100644
index 0000000000000..f263e391e24cb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
+
+#include "imx7d-pico.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX7D Board and PI baseboard";
+	compatible = "technexion,imx7d-pico-pi", "fsl,imx7d";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		};
+	};
+};
+
+&i2c1 {
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_vref_1v8>;
+	};
+};
+
+&i2c4 {
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
new file mode 100644
index 0000000000000..73d90845e85c2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
@@ -0,0 +1,675 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 50000 0>;
+		brightness-levels = <0 36 72 108 144 180 216 255>;
+		default-brightness-level = <6>;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	panel {
+		compatible = "vxt,vl050-8048nt-c01";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcdreg_on>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlreg_on: regulator-wlreg_on {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wlreg_on>;
+		regulator-name = "wlreg_on";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_pwr>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	usdhc2_pwrseq: usdhc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			status = "okay";
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 { /* Backlight */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart7 { /* Bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	fsl,tuning-step = <2>;
+	vmmc-supply = <&reg_3p3v>;
+	wakeup-source;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 { /* Wifi SDIO */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi_clk>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_wlreg_on>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	no-1-8-v;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2
+			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2
+			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2
+			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__I2C1_SDA	0x4000007f
+			MX7D_PAD_UART1_RX_DATA__I2C1_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_TX_DATA__I2C2_SDA	0x4000007f
+			MX7D_PAD_UART2_RX_DATA__I2C2_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+			MX7D_PAD_SD3_RESET_B__GPIO6_IO11		0x1  /* Ethernet reset */
+		>;
+	};
+
+	pinctrl_can1: can1frp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX	0x59
+			MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX	0x59
+		>;
+	};
+
+	pinctrl_can2: can2frp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX	0x59
+			MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX	0x59
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x78
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x78
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x78
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14
+		>;
+	};
+
+	pinctrl_pwm1: pwm1 {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT	0x7f
+		>;
+	};
+
+	pinctrl_pwm2: pwm2 {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT	0x7f
+		>;
+	};
+
+	pinctrl_pwm3: pwm3 {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT	0x7f
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp{
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO11__PWM4_OUT	0x7f
+		>;
+	};
+
+	pinctrl_reg_wlreg_on: regregongrp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x59
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK	0x1f
+			MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x79
+			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x79
+			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x79
+			MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x79
+			MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x79
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX	0x79
+			MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX	0x79
+			MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS	0x79
+			MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usbotg1_pwr: usbotg_pwr {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__GPIO4_IO5	0x14
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x15
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x15
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x15
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wifi_clk: wificlkgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
+		>;
+	};
+
+	pinctrl_reg_lcdreg_on: reglcdongrp {
+	fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x59
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h
new file mode 100644
index 0000000000000..69f2c1ec8254d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h
@@ -0,0 +1,1154 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX7D_PINFUNC_H
+#define __DTS_IMX7D_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0                       0x0000 0x0030 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT                        0x0000 0x0030 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_ANY                  0x0000 0x0030 0x0000 0x2 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B                    0x0000 0x0030 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG__RST_B_DEB           0x0000 0x0030 0x0000 0x4 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1                       0x0004 0x0034 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT                        0x0004 0x0034 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3               0x0004 0x0034 0x0000 0x2 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__SAI1_MCLK                       0x0004 0x0034 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__ANATOP_24M_OUT                  0x0004 0x0034 0x0000 0x4 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__OBSERVE0_OUT                    0x0004 0x0034 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2                       0x0008 0x0038 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__PWM2_OUT                        0x0008 0x0038 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_ENET_REF_CLK1               0x0008 0x0038 0x0564 0x2 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO02__SAI2_MCLK                       0x0008 0x0038 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_CLKO1                       0x0008 0x0038 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__OBSERVE1_OUT                    0x0008 0x0038 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__USB_OTG1_ID                     0x0008 0x0038 0x0734 0x7 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3                       0x000C 0x003C 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__PWM3_OUT                        0x000C 0x003C 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_ENET_REF_CLK2               0x000C 0x003C 0x0570 0x2 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK                       0x000C 0x003C 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2                       0x000C 0x003C 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__OBSERVE2_OUT                    0x000C 0x003C 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__USB_OTG2_ID                     0x000C 0x003C 0x0730 0x7 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4                       0x0010 0x0040 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC                     0x0010 0x0040 0x072C 0x1 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO04__FLEXTIMER1_CH4                  0x0010 0x0040 0x0594 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DCE_CTS                   0x0010 0x0040 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DTE_RTS                   0x0010 0x0040 0x0710 0x3 0x4
+#define MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL                        0x0010 0x0040 0x05D4 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO04__OBSERVE3_OUT                    0x0010 0x0040 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5                       0x0014 0x0044 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR                    0x0014 0x0044 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__FLEXTIMER1_CH5                  0x0014 0x0044 0x0598 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DCE_RTS                   0x0014 0x0044 0x0710 0x3 0x5
+#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DTE_CTS                   0x0014 0x0044 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA                        0x0014 0x0044 0x05D8 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO05__OBSERVE4_OUT                    0x0014 0x0044 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6                       0x0018 0x0048 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC                     0x0018 0x0048 0x0728 0x1 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO06__FLEXTIMER1_CH6                  0x0018 0x0048 0x059C 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DCE_RX                    0x0018 0x0048 0x0714 0x3 0x4
+#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DTE_TX                    0x0018 0x0048 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__I2C2_SCL                        0x0018 0x0048 0x05DC 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO06__CCM_WAIT                        0x0018 0x0048 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__KPP_ROW4                        0x0018 0x0048 0x0624 0x6 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7                       0x001C 0x004C 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__USB_OTG2_PWR                    0x001C 0x004C 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__FLEXTIMER1_CH7                  0x001C 0x004C 0x05A0 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DCE_TX                    0x001C 0x004C 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DTE_RX                    0x001C 0x004C 0x0714 0x3 0x5
+#define MX7D_PAD_LPSR_GPIO1_IO07__I2C2_SDA                        0x001C 0x004C 0x05E0 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO07__CCM_STOP                        0x001C 0x004C 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__KPP_COL4                        0x001C 0x004C 0x0604 0x6 0x1
+#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8                            0x0014 0x026C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT                          0x0014 0x026C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B                         0x0014 0x026C 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DCE_RX                         0x0014 0x026C 0x0704 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DTE_TX                         0x0014 0x026C 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__I2C3_SCL                             0x0014 0x026C 0x05E4 0x4 0x0
+#define MX7D_PAD_GPIO1_IO08__KPP_COL5                             0x0014 0x026C 0x0608 0x6 0x0
+#define MX7D_PAD_GPIO1_IO08__PWM1_OUT                             0x0014 0x026C 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO09__GPIO1_IO9                            0x0018 0x0270 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO09__SD1_LCTL                             0x0018 0x0270 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_ENET_REF_CLK3                    0x0018 0x0270 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DCE_TX                         0x0018 0x0270 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DTE_RX                         0x0018 0x0270 0x0704 0x3 0x1
+#define MX7D_PAD_GPIO1_IO09__I2C3_SDA                             0x0018 0x0270 0x05E8 0x4 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_PMIC_READY                       0x0018 0x0270 0x04F4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO09__KPP_ROW5                             0x0018 0x0270 0x0628 0x6 0x0
+#define MX7D_PAD_GPIO1_IO09__PWM2_OUT                             0x0018 0x0270 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO10__GPIO1_IO10                           0x001C 0x0274 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO10__SD2_LCTL                             0x001C 0x0274 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO10__ENET1_MDIO                           0x001C 0x0274 0x0568 0x2 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DCE_RTS                        0x001C 0x0274 0x0700 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DTE_CTS                        0x001C 0x0274 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__I2C4_SCL                             0x001C 0x0274 0x05EC 0x4 0x0
+#define MX7D_PAD_GPIO1_IO10__FLEXTIMER1_PHA                       0x001C 0x0274 0x05A4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO10__KPP_COL6                             0x001C 0x0274 0x060C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO10__PWM3_OUT                             0x001C 0x0274 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO11__GPIO1_IO11                           0x0020 0x0278 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO11__SD3_LCTL                             0x0020 0x0278 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO11__ENET1_MDC                            0x0020 0x0278 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DCE_CTS                        0x0020 0x0278 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DTE_RTS                        0x0020 0x0278 0x0700 0x3 0x1
+#define MX7D_PAD_GPIO1_IO11__I2C4_SDA                             0x0020 0x0278 0x05F0 0x4 0x0
+#define MX7D_PAD_GPIO1_IO11__FLEXTIMER1_PHB                       0x0020 0x0278 0x05A8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO11__KPP_ROW6                             0x0020 0x0278 0x062C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO11__PWM4_OUT                             0x0020 0x0278 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO12__GPIO1_IO12                           0x0024 0x027C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO12__SD2_VSELECT                          0x0024 0x027C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1                    0x0024 0x027C 0x0564 0x2 0x0
+#define MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX                          0x0024 0x027C 0x04DC 0x3 0x0
+#define MX7D_PAD_GPIO1_IO12__CM4_NMI                              0x0024 0x027C 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_EXT_CLK1                         0x0024 0x027C 0x04E4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO12__SNVS_VIO_5                           0x0024 0x027C 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO12__USB_OTG1_ID                          0x0024 0x027C 0x0734 0x7 0x0
+#define MX7D_PAD_GPIO1_IO13__GPIO1_IO13                           0x0028 0x0280 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO13__SD3_VSELECT                          0x0028 0x0280 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_ENET_REF_CLK2                    0x0028 0x0280 0x0570 0x2 0x0
+#define MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX                          0x0028 0x0280 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_PMIC_READY                       0x0028 0x0280 0x04F4 0x4 0x1
+#define MX7D_PAD_GPIO1_IO13__CCM_EXT_CLK2                         0x0028 0x0280 0x04E8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO13__SNVS_VIO_5_CTL                       0x0028 0x0280 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO13__USB_OTG2_ID                          0x0028 0x0280 0x0730 0x7 0x0
+#define MX7D_PAD_GPIO1_IO14__GPIO1_IO14                           0x002C 0x0284 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO14__SD3_CD_B                             0x002C 0x0284 0x0738 0x1 0x0
+#define MX7D_PAD_GPIO1_IO14__ENET2_MDIO                           0x002C 0x0284 0x0574 0x2 0x0
+#define MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX                          0x002C 0x0284 0x04E0 0x3 0x0
+#define MX7D_PAD_GPIO1_IO14__WDOG3_WDOG_B                         0x002C 0x0284 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO14__CCM_EXT_CLK3                         0x002C 0x0284 0x04EC 0x5 0x0
+#define MX7D_PAD_GPIO1_IO14__SDMA_EXT_EVENT0                      0x002C 0x0284 0x06D8 0x6 0x0
+#define MX7D_PAD_GPIO1_IO15__GPIO1_IO15                           0x0030 0x0288 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO15__SD3_WP                               0x0030 0x0288 0x073C 0x1 0x0
+#define MX7D_PAD_GPIO1_IO15__ENET2_MDC                            0x0030 0x0288 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX                          0x0030 0x0288 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO15__WDOG4_WDOG_B                         0x0030 0x0288 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO15__CCM_EXT_CLK4                         0x0030 0x0288 0x04F0 0x5 0x0
+#define MX7D_PAD_GPIO1_IO15__SDMA_EXT_EVENT1                      0x0030 0x0288 0x06DC 0x6 0x0
+#define MX7D_PAD_EPDC_DATA00__EPDC_DATA0                          0x0034 0x02A4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD                     0x0034 0x02A4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0                        0x0034 0x02A4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA00__KPP_ROW3                            0x0034 0x02A4 0x0620 0x3 0x0
+#define MX7D_PAD_EPDC_DATA00__EIM_AD0                             0x0034 0x02A4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA00__GPIO2_IO0                           0x0034 0x02A4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA00__LCD_DATA0                           0x0034 0x02A4 0x0638 0x6 0x0
+#define MX7D_PAD_EPDC_DATA00__LCD_CLK                             0x0034 0x02A4 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA01__EPDC_DATA1                          0x0038 0x02A8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA01__SIM1_PORT2_CLK                      0x0038 0x02A8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1                        0x0038 0x02A8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA01__KPP_COL3                            0x0038 0x02A8 0x0600 0x3 0x0
+#define MX7D_PAD_EPDC_DATA01__EIM_AD1                             0x0038 0x02A8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA01__GPIO2_IO1                           0x0038 0x02A8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA01__LCD_DATA1                           0x0038 0x02A8 0x063C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA01__LCD_ENABLE                          0x0038 0x02A8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA02__EPDC_DATA2                          0x003C 0x02AC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA02__SIM1_PORT2_RST_B                    0x003C 0x02AC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2                        0x003C 0x02AC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA02__KPP_ROW2                            0x003C 0x02AC 0x061C 0x3 0x0
+#define MX7D_PAD_EPDC_DATA02__EIM_AD2                             0x003C 0x02AC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA02__GPIO2_IO2                           0x003C 0x02AC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA02__LCD_DATA2                           0x003C 0x02AC 0x0640 0x6 0x0
+#define MX7D_PAD_EPDC_DATA02__LCD_VSYNC                           0x003C 0x02AC 0x0698 0x7 0x0
+#define MX7D_PAD_EPDC_DATA03__EPDC_DATA3                          0x0040 0x02B0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA03__SIM1_PORT2_SVEN                     0x0040 0x02B0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3                        0x0040 0x02B0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA03__KPP_COL2                            0x0040 0x02B0 0x05FC 0x3 0x0
+#define MX7D_PAD_EPDC_DATA03__EIM_AD3                             0x0040 0x02B0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA03__GPIO2_IO3                           0x0040 0x02B0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA03__LCD_DATA3                           0x0040 0x02B0 0x0644 0x6 0x0
+#define MX7D_PAD_EPDC_DATA03__LCD_HSYNC                           0x0040 0x02B0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA04__EPDC_DATA4                          0x0044 0x02B4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA04__SIM1_PORT2_PD                       0x0044 0x02B4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA04__QSPI_A_DQS                          0x0044 0x02B4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA04__KPP_ROW1                            0x0044 0x02B4 0x0618 0x3 0x0
+#define MX7D_PAD_EPDC_DATA04__EIM_AD4                             0x0044 0x02B4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA04__GPIO2_IO4                           0x0044 0x02B4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA04__LCD_DATA4                           0x0044 0x02B4 0x0648 0x6 0x0
+#define MX7D_PAD_EPDC_DATA04__JTAG_FAIL                           0x0044 0x02B4 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA05__EPDC_DATA5                          0x0048 0x02B8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA05__SIM2_PORT2_TRXD                     0x0048 0x02B8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK                         0x0048 0x02B8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA05__KPP_COL1                            0x0048 0x02B8 0x05F8 0x3 0x0
+#define MX7D_PAD_EPDC_DATA05__EIM_AD5                             0x0048 0x02B8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA05__GPIO2_IO5                           0x0048 0x02B8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA05__LCD_DATA5                           0x0048 0x02B8 0x064C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA05__JTAG_ACTIVE                         0x0048 0x02B8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA06__EPDC_DATA6                          0x004C 0x02BC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA06__SIM2_PORT2_CLK                      0x004C 0x02BC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B                        0x004C 0x02BC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA06__KPP_ROW0                            0x004C 0x02BC 0x0614 0x3 0x0
+#define MX7D_PAD_EPDC_DATA06__EIM_AD6                             0x004C 0x02BC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA06__GPIO2_IO6                           0x004C 0x02BC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA06__LCD_DATA6                           0x004C 0x02BC 0x0650 0x6 0x0
+#define MX7D_PAD_EPDC_DATA06__JTAG_DE_B                           0x004C 0x02BC 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA07__EPDC_DATA7                          0x0050 0x02C0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA07__SIM2_PORT2_RST_B                    0x0050 0x02C0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B                        0x0050 0x02C0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA07__KPP_COL0                            0x0050 0x02C0 0x05F4 0x3 0x0
+#define MX7D_PAD_EPDC_DATA07__EIM_AD7                             0x0050 0x02C0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA07__GPIO2_IO7                           0x0050 0x02C0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA07__LCD_DATA7                           0x0050 0x02C0 0x0654 0x6 0x0
+#define MX7D_PAD_EPDC_DATA07__JTAG_DONE                           0x0050 0x02C0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA08__EPDC_DATA8                          0x0054 0x02C4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA08__SIM1_PORT1_TRXD                     0x0054 0x02C4 0x06E4 0x1 0x0
+#define MX7D_PAD_EPDC_DATA08__QSPI_B_DATA0                        0x0054 0x02C4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA08__UART6_DCE_RX                        0x0054 0x02C4 0x071C 0x3 0x0
+#define MX7D_PAD_EPDC_DATA08__UART6_DTE_TX                        0x0054 0x02C4 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA08__EIM_OE                              0x0054 0x02C4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA08__GPIO2_IO8                           0x0054 0x02C4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA08__LCD_DATA8                           0x0054 0x02C4 0x0658 0x6 0x0
+#define MX7D_PAD_EPDC_DATA08__LCD_BUSY                            0x0054 0x02C4 0x0634 0x7 0x0
+#define MX7D_PAD_EPDC_DATA08__EPDC_SDCLK                          0x0054 0x02C4 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA09__EPDC_DATA9                          0x0058 0x02C8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA09__SIM1_PORT1_CLK                      0x0058 0x02C8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA09__QSPI_B_DATA1                        0x0058 0x02C8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA09__UART6_DCE_TX                        0x0058 0x02C8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA09__UART6_DTE_RX                        0x0058 0x02C8 0x071C 0x3 0x1
+#define MX7D_PAD_EPDC_DATA09__EIM_RW                              0x0058 0x02C8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA09__GPIO2_IO9                           0x0058 0x02C8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA09__LCD_DATA9                           0x0058 0x02C8 0x065C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA09__LCD_DATA0                           0x0058 0x02C8 0x0638 0x7 0x1
+#define MX7D_PAD_EPDC_DATA09__EPDC_SDLE                           0x0058 0x02C8 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA10__EPDC_DATA10                         0x005C 0x02CC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA10__SIM1_PORT1_RST_B                    0x005C 0x02CC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA10__QSPI_B_DATA2                        0x005C 0x02CC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS                       0x005C 0x02CC 0x0718 0x3 0x0
+#define MX7D_PAD_EPDC_DATA10__UART6_DTE_CTS                       0x005C 0x02CC 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA10__EIM_CS0_B                           0x005C 0x02CC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA10__GPIO2_IO10                          0x005C 0x02CC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA10__LCD_DATA10                          0x005C 0x02CC 0x0660 0x6 0x0
+#define MX7D_PAD_EPDC_DATA10__LCD_DATA9                           0x005C 0x02CC 0x065C 0x7 0x1
+#define MX7D_PAD_EPDC_DATA10__EPDC_SDOE                           0x005C 0x02CC 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA11__EPDC_DATA11                         0x0060 0x02D0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA11__SIM1_PORT1_SVEN                     0x0060 0x02D0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA11__QSPI_B_DATA3                        0x0060 0x02D0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS                       0x0060 0x02D0 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA11__UART6_DTE_RTS                       0x0060 0x02D0 0x0718 0x3 0x1
+#define MX7D_PAD_EPDC_DATA11__EIM_BCLK                            0x0060 0x02D0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA11__GPIO2_IO11                          0x0060 0x02D0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA11__LCD_DATA11                          0x0060 0x02D0 0x0664 0x6 0x0
+#define MX7D_PAD_EPDC_DATA11__LCD_DATA1                           0x0060 0x02D0 0x063C 0x7 0x1
+#define MX7D_PAD_EPDC_DATA11__EPDC_SDCE0                          0x0060 0x02D0 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA12__EPDC_DATA12                         0x0064 0x02D4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA12__SIM1_PORT1_PD                       0x0064 0x02D4 0x06E0 0x1 0x0
+#define MX7D_PAD_EPDC_DATA12__QSPI_B_DQS                          0x0064 0x02D4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA12__UART7_DCE_RX                        0x0064 0x02D4 0x0724 0x3 0x0
+#define MX7D_PAD_EPDC_DATA12__UART7_DTE_TX                        0x0064 0x02D4 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA12__EIM_LBA_B                           0x0064 0x02D4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA12__GPIO2_IO12                          0x0064 0x02D4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA12__LCD_DATA12                          0x0064 0x02D4 0x0668 0x6 0x0
+#define MX7D_PAD_EPDC_DATA12__LCD_DATA21                          0x0064 0x02D4 0x068C 0x7 0x0
+#define MX7D_PAD_EPDC_DATA12__EPDC_GDCLK                          0x0064 0x02D4 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA13__EPDC_DATA13                         0x0068 0x02D8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA13__SIM2_PORT1_TRXD                     0x0068 0x02D8 0x06EC 0x1 0x0
+#define MX7D_PAD_EPDC_DATA13__QSPI_B_SCLK                         0x0068 0x02D8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA13__UART7_DCE_TX                        0x0068 0x02D8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA13__UART7_DTE_RX                        0x0068 0x02D8 0x0724 0x3 0x1
+#define MX7D_PAD_EPDC_DATA13__EIM_WAIT                            0x0068 0x02D8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA13__GPIO2_IO13                          0x0068 0x02D8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA13__LCD_DATA13                          0x0068 0x02D8 0x066C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA13__LCD_CS                              0x0068 0x02D8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA13__EPDC_GDOE                           0x0068 0x02D8 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA14__EPDC_DATA14                         0x006C 0x02DC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA14__SIM2_PORT1_CLK                      0x006C 0x02DC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA14__QSPI_B_SS0_B                        0x006C 0x02DC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS                       0x006C 0x02DC 0x0720 0x3 0x0
+#define MX7D_PAD_EPDC_DATA14__UART7_DTE_CTS                       0x006C 0x02DC 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA14__EIM_EB_B0                           0x006C 0x02DC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA14__GPIO2_IO14                          0x006C 0x02DC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA14__LCD_DATA14                          0x006C 0x02DC 0x0670 0x6 0x0
+#define MX7D_PAD_EPDC_DATA14__LCD_DATA22                          0x006C 0x02DC 0x0690 0x7 0x0
+#define MX7D_PAD_EPDC_DATA14__EPDC_GDSP                           0x006C 0x02DC 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA15__EPDC_DATA15                         0x0070 0x02E0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA15__SIM2_PORT1_RST_B                    0x0070 0x02E0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA15__QSPI_B_SS1_B                        0x0070 0x02E0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS                       0x0070 0x02E0 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA15__UART7_DTE_RTS                       0x0070 0x02E0 0x0720 0x3 0x1
+#define MX7D_PAD_EPDC_DATA15__EIM_CS1_B                           0x0070 0x02E0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA15__GPIO2_IO15                          0x0070 0x02E0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA15__LCD_DATA15                          0x0070 0x02E0 0x0674 0x6 0x0
+#define MX7D_PAD_EPDC_DATA15__LCD_WR_RWN                          0x0070 0x02E0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA15__EPDC_PWR_COM                        0x0070 0x02E0 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_SDCLK__EPDC_SDCLK                           0x0074 0x02E4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCLK__SIM2_PORT2_SVEN                      0x0074 0x02E4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0                      0x0074 0x02E4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCLK__KPP_ROW4                             0x0074 0x02E4 0x0624 0x3 0x0
+#define MX7D_PAD_EPDC_SDCLK__EIM_AD10                             0x0074 0x02E4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCLK__GPIO2_IO16                           0x0074 0x02E4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCLK__LCD_CLK                              0x0074 0x02E4 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_SDCLK__LCD_DATA20                           0x0074 0x02E4 0x0688 0x7 0x0
+#define MX7D_PAD_EPDC_SDLE__EPDC_SDLE                             0x0078 0x02E8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDLE__SIM2_PORT2_PD                         0x0078 0x02E8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1                       0x0078 0x02E8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDLE__KPP_COL4                              0x0078 0x02E8 0x0604 0x3 0x0
+#define MX7D_PAD_EPDC_SDLE__EIM_AD11                              0x0078 0x02E8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDLE__GPIO2_IO17                            0x0078 0x02E8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDLE__LCD_DATA16                            0x0078 0x02E8 0x0678 0x6 0x0
+#define MX7D_PAD_EPDC_SDLE__LCD_DATA8                             0x0078 0x02E8 0x0658 0x7 0x1
+#define MX7D_PAD_EPDC_SDOE__EPDC_SDOE                             0x007C 0x02EC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDOE__FLEXTIMER1_CH0                        0x007C 0x02EC 0x0584 0x1 0x0
+#define MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2                       0x007C 0x02EC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDOE__KPP_COL5                              0x007C 0x02EC 0x0608 0x3 0x1
+#define MX7D_PAD_EPDC_SDOE__EIM_AD12                              0x007C 0x02EC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDOE__GPIO2_IO18                            0x007C 0x02EC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDOE__LCD_DATA17                            0x007C 0x02EC 0x067C 0x6 0x0
+#define MX7D_PAD_EPDC_SDOE__LCD_DATA23                            0x007C 0x02EC 0x0694 0x7 0x0
+#define MX7D_PAD_EPDC_SDSHR__EPDC_SDSHR                           0x0080 0x02F0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDSHR__FLEXTIMER1_CH1                       0x0080 0x02F0 0x0588 0x1 0x0
+#define MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3                      0x0080 0x02F0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDSHR__KPP_ROW5                             0x0080 0x02F0 0x0628 0x3 0x1
+#define MX7D_PAD_EPDC_SDSHR__EIM_AD13                             0x0080 0x02F0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDSHR__GPIO2_IO19                           0x0080 0x02F0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDSHR__LCD_DATA18                           0x0080 0x02F0 0x0680 0x6 0x0
+#define MX7D_PAD_EPDC_SDSHR__LCD_DATA10                           0x0080 0x02F0 0x0660 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE0__EPDC_SDCE0                           0x0084 0x02F4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE0__FLEXTIMER1_CH2                       0x0084 0x02F4 0x058C 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL                   0x0084 0x02F4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE0__EIM_AD14                             0x0084 0x02F4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE0__GPIO2_IO20                           0x0084 0x02F4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE0__LCD_DATA19                           0x0084 0x02F4 0x0684 0x6 0x0
+#define MX7D_PAD_EPDC_SDCE0__LCD_DATA5                            0x0084 0x02F4 0x064C 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE1__EPDC_SDCE1                           0x0088 0x02F8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE1__FLEXTIMER1_CH3                       0x0088 0x02F8 0x0590 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC                      0x0088 0x02F8 0x0578 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE1__ENET2_RX_ER                          0x0088 0x02F8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_SDCE1__EIM_AD15                             0x0088 0x02F8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE1__GPIO2_IO21                           0x0088 0x02F8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE1__LCD_DATA20                           0x0088 0x02F8 0x0688 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE1__LCD_DATA4                            0x0088 0x02F8 0x0648 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE2__EPDC_SDCE2                           0x008C 0x02FC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE2__SIM2_PORT1_SVEN                      0x008C 0x02FC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0                      0x008C 0x02FC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE2__KPP_COL6                             0x008C 0x02FC 0x060C 0x3 0x1
+#define MX7D_PAD_EPDC_SDCE2__EIM_ADDR16                           0x008C 0x02FC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE2__GPIO2_IO22                           0x008C 0x02FC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE2__LCD_DATA21                           0x008C 0x02FC 0x068C 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE2__LCD_DATA3                            0x008C 0x02FC 0x0644 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE3__EPDC_SDCE3                           0x0090 0x0300 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE3__SIM2_PORT1_PD                        0x0090 0x0300 0x06E8 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1                      0x0090 0x0300 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE3__KPP_ROW6                             0x0090 0x0300 0x062C 0x3 0x1
+#define MX7D_PAD_EPDC_SDCE3__EIM_ADDR17                           0x0090 0x0300 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE3__GPIO2_IO23                           0x0090 0x0300 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE3__LCD_DATA22                           0x0090 0x0300 0x0690 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE3__LCD_DATA2                            0x0090 0x0300 0x0640 0x7 0x1
+#define MX7D_PAD_EPDC_GDCLK__EPDC_GDCLK                           0x0094 0x0304 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDCLK__FLEXTIMER2_CH0                       0x0094 0x0304 0x05AC 0x1 0x0
+#define MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2                      0x0094 0x0304 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDCLK__KPP_COL7                             0x0094 0x0304 0x0610 0x3 0x0
+#define MX7D_PAD_EPDC_GDCLK__EIM_ADDR18                           0x0094 0x0304 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDCLK__GPIO2_IO24                           0x0094 0x0304 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDCLK__LCD_DATA23                           0x0094 0x0304 0x0694 0x6 0x1
+#define MX7D_PAD_EPDC_GDCLK__LCD_DATA16                           0x0094 0x0304 0x0678 0x7 0x1
+#define MX7D_PAD_EPDC_GDOE__EPDC_GDOE                             0x0098 0x0308 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDOE__FLEXTIMER2_CH1                        0x0098 0x0308 0x05B0 0x1 0x0
+#define MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3                       0x0098 0x0308 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDOE__KPP_ROW7                              0x0098 0x0308 0x0630 0x3 0x0
+#define MX7D_PAD_EPDC_GDOE__EIM_ADDR19                            0x0098 0x0308 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDOE__GPIO2_IO25                            0x0098 0x0308 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDOE__LCD_WR_RWN                            0x0098 0x0308 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_GDOE__LCD_DATA18                            0x0098 0x0308 0x0680 0x7 0x1
+#define MX7D_PAD_EPDC_GDRL__EPDC_GDRL                             0x009C 0x030C 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDRL__FLEXTIMER2_CH2                        0x009C 0x030C 0x05B4 0x1 0x0
+#define MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL                    0x009C 0x030C 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDRL__EIM_ADDR20                            0x009C 0x030C 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDRL__GPIO2_IO26                            0x009C 0x030C 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDRL__LCD_RD_E                              0x009C 0x030C 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_GDRL__LCD_DATA19                            0x009C 0x030C 0x0684 0x7 0x1
+#define MX7D_PAD_EPDC_GDSP__EPDC_GDSP                             0x00A0 0x0310 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDSP__FLEXTIMER2_CH3                        0x00A0 0x0310 0x05B8 0x1 0x0
+#define MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC                       0x00A0 0x0310 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDSP__ENET2_TX_ER                           0x00A0 0x0310 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_GDSP__EIM_ADDR21                            0x00A0 0x0310 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDSP__GPIO2_IO27                            0x00A0 0x0310 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDSP__LCD_BUSY                              0x00A0 0x0310 0x0634 0x6 0x1
+#define MX7D_PAD_EPDC_GDSP__LCD_DATA17                            0x00A0 0x0310 0x067C 0x7 0x1
+#define MX7D_PAD_EPDC_BDR0__EPDC_BDR0                             0x00A4 0x0314 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_BDR0__ENET2_TX_CLK                          0x00A4 0x0314 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_BDR0__CCM_ENET_REF_CLK2                     0x00A4 0x0314 0x0570 0x3 0x1
+#define MX7D_PAD_EPDC_BDR0__EIM_ADDR22                            0x00A4 0x0314 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_BDR0__GPIO2_IO28                            0x00A4 0x0314 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_BDR0__LCD_CS                                0x00A4 0x0314 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_BDR0__LCD_DATA7                             0x00A4 0x0314 0x0654 0x7 0x1
+#define MX7D_PAD_EPDC_BDR1__EPDC_BDR1                             0x00A8 0x0318 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_BDR1__EPDC_SDCLKN                           0x00A8 0x0318 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_BDR1__ENET2_RX_CLK                          0x00A8 0x0318 0x0578 0x2 0x1
+#define MX7D_PAD_EPDC_BDR1__EIM_AD8                               0x00A8 0x0318 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_BDR1__GPIO2_IO29                            0x00A8 0x0318 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_BDR1__LCD_ENABLE                            0x00A8 0x0318 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_BDR1__LCD_DATA6                             0x00A8 0x0318 0x0650 0x7 0x1
+#define MX7D_PAD_EPDC_PWR_COM__EPDC_PWR_COM                       0x00AC 0x031C 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_PWR_COM__FLEXTIMER2_PHA                     0x00AC 0x031C 0x05CC 0x1 0x0
+#define MX7D_PAD_EPDC_PWR_COM__ENET2_CRS                          0x00AC 0x031C 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_PWR_COM__EIM_AD9                            0x00AC 0x031C 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30                         0x00AC 0x031C 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_PWR_COM__LCD_HSYNC                          0x00AC 0x031C 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_PWR_COM__LCD_DATA11                         0x00AC 0x031C 0x0664 0x7 0x1
+#define MX7D_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                     0x00B0 0x0320 0x0580 0x0 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__FLEXTIMER2_PHB                    0x00B0 0x0320 0x05D0 0x1 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__ENET2_COL                         0x00B0 0x0320 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__EIM_EB_B1                         0x00B0 0x0320 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31                        0x00B0 0x0320 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__LCD_VSYNC                         0x00B0 0x0320 0x0698 0x6 0x1
+#define MX7D_PAD_EPDC_PWR_STAT__LCD_DATA12                        0x00B0 0x0320 0x0668 0x7 0x1
+#define MX7D_PAD_LCD_CLK__LCD_CLK                                 0x00B4 0x0324 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_CLK__ECSPI4_MISO                             0x00B4 0x0324 0x0558 0x1 0x0
+#define MX7D_PAD_LCD_CLK__ENET1_1588_EVENT2_IN                    0x00B4 0x0324 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_CLK__CSI_DATA16                              0x00B4 0x0324 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_CLK__UART2_DCE_RX                            0x00B4 0x0324 0x06FC 0x4 0x0
+#define MX7D_PAD_LCD_CLK__UART2_DTE_TX                            0x00B4 0x0324 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_CLK__GPIO3_IO0                               0x00B4 0x0324 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_ENABLE__LCD_ENABLE                           0x00B8 0x0328 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI                          0x00B8 0x0328 0x055C 0x1 0x0
+#define MX7D_PAD_LCD_ENABLE__ENET1_1588_EVENT3_IN                 0x00B8 0x0328 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_ENABLE__CSI_DATA17                           0x00B8 0x0328 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_ENABLE__UART2_DCE_TX                         0x00B8 0x0328 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_ENABLE__UART2_DTE_RX                         0x00B8 0x0328 0x06FC 0x4 0x1
+#define MX7D_PAD_LCD_ENABLE__GPIO3_IO1                            0x00B8 0x0328 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_HSYNC__LCD_HSYNC                             0x00BC 0x032C 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK                           0x00BC 0x032C 0x0554 0x1 0x0
+#define MX7D_PAD_LCD_HSYNC__ENET2_1588_EVENT2_IN                  0x00BC 0x032C 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_HSYNC__CSI_DATA18                            0x00BC 0x032C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_HSYNC__UART2_DCE_RTS                         0x00BC 0x032C 0x06F8 0x4 0x0
+#define MX7D_PAD_LCD_HSYNC__UART2_DTE_CTS                         0x00BC 0x032C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_HSYNC__GPIO3_IO2                             0x00BC 0x032C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_VSYNC__LCD_VSYNC                             0x00C0 0x0330 0x0698 0x0 0x2
+#define MX7D_PAD_LCD_VSYNC__ECSPI4_SS0                            0x00C0 0x0330 0x0560 0x1 0x0
+#define MX7D_PAD_LCD_VSYNC__ENET2_1588_EVENT3_IN                  0x00C0 0x0330 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_VSYNC__CSI_DATA19                            0x00C0 0x0330 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_VSYNC__UART2_DCE_CTS                         0x00C0 0x0330 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_VSYNC__UART2_DTE_RTS                         0x00C0 0x0330 0x06F8 0x4 0x1
+#define MX7D_PAD_LCD_VSYNC__GPIO3_IO3                             0x00C0 0x0330 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_RESET__LCD_RESET                             0x00C4 0x0334 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_RESET__GPT1_COMPARE1                         0x00C4 0x0334 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_RESET__ARM_PLATFORM_EVENTI                   0x00C4 0x0334 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_RESET__CSI_FIELD                             0x00C4 0x0334 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_RESET__EIM_DTACK_B                           0x00C4 0x0334 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_RESET__GPIO3_IO4                             0x00C4 0x0334 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA00__LCD_DATA0                            0x00C8 0x0338 0x0638 0x0 0x2
+#define MX7D_PAD_LCD_DATA00__GPT1_COMPARE2                        0x00C8 0x0338 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA00__CSI_DATA20                           0x00C8 0x0338 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA00__EIM_DATA0                            0x00C8 0x0338 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA00__GPIO3_IO5                            0x00C8 0x0338 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA00__SRC_BOOT_CFG0                        0x00C8 0x0338 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA01__LCD_DATA1                            0x00CC 0x033C 0x063C 0x0 0x2
+#define MX7D_PAD_LCD_DATA01__GPT1_COMPARE3                        0x00CC 0x033C 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA01__CSI_DATA21                           0x00CC 0x033C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA01__EIM_DATA1                            0x00CC 0x033C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA01__GPIO3_IO6                            0x00CC 0x033C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA01__SRC_BOOT_CFG1                        0x00CC 0x033C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA02__LCD_DATA2                            0x00D0 0x0340 0x0640 0x0 0x2
+#define MX7D_PAD_LCD_DATA02__GPT1_CLK                             0x00D0 0x0340 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA02__CSI_DATA22                           0x00D0 0x0340 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA02__EIM_DATA2                            0x00D0 0x0340 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA02__GPIO3_IO7                            0x00D0 0x0340 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA02__SRC_BOOT_CFG2                        0x00D0 0x0340 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA03__LCD_DATA3                            0x00D4 0x0344 0x0644 0x0 0x2
+#define MX7D_PAD_LCD_DATA03__GPT1_CAPTURE1                        0x00D4 0x0344 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA03__CSI_DATA23                           0x00D4 0x0344 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA03__EIM_DATA3                            0x00D4 0x0344 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA03__GPIO3_IO8                            0x00D4 0x0344 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA03__SRC_BOOT_CFG3                        0x00D4 0x0344 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA04__LCD_DATA4                            0x00D8 0x0348 0x0648 0x0 0x2
+#define MX7D_PAD_LCD_DATA04__GPT1_CAPTURE2                        0x00D8 0x0348 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA04__CSI_VSYNC                            0x00D8 0x0348 0x0520 0x3 0x0
+#define MX7D_PAD_LCD_DATA04__EIM_DATA4                            0x00D8 0x0348 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA04__GPIO3_IO9                            0x00D8 0x0348 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA04__SRC_BOOT_CFG4                        0x00D8 0x0348 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA05__LCD_DATA5                            0x00DC 0x034C 0x064C 0x0 0x2
+#define MX7D_PAD_LCD_DATA05__CSI_HSYNC                            0x00DC 0x034C 0x0518 0x3 0x0
+#define MX7D_PAD_LCD_DATA05__EIM_DATA5                            0x00DC 0x034C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA05__GPIO3_IO10                           0x00DC 0x034C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA05__SRC_BOOT_CFG5                        0x00DC 0x034C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA06__LCD_DATA6                            0x00E0 0x0350 0x0650 0x0 0x2
+#define MX7D_PAD_LCD_DATA06__CSI_PIXCLK                           0x00E0 0x0350 0x051C 0x3 0x0
+#define MX7D_PAD_LCD_DATA06__EIM_DATA6                            0x00E0 0x0350 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA06__GPIO3_IO11                           0x00E0 0x0350 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA06__SRC_BOOT_CFG6                        0x00E0 0x0350 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA07__LCD_DATA7                            0x00E4 0x0354 0x0654 0x0 0x2
+#define MX7D_PAD_LCD_DATA07__CSI_MCLK                             0x00E4 0x0354 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA07__EIM_DATA7                            0x00E4 0x0354 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA07__GPIO3_IO12                           0x00E4 0x0354 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA07__SRC_BOOT_CFG7                        0x00E4 0x0354 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA08__LCD_DATA8                            0x00E8 0x0358 0x0658 0x0 0x2
+#define MX7D_PAD_LCD_DATA08__CSI_DATA9                            0x00E8 0x0358 0x0514 0x3 0x0
+#define MX7D_PAD_LCD_DATA08__EIM_DATA8                            0x00E8 0x0358 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA08__GPIO3_IO13                           0x00E8 0x0358 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA08__SRC_BOOT_CFG8                        0x00E8 0x0358 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA09__LCD_DATA9                            0x00EC 0x035C 0x065C 0x0 0x2
+#define MX7D_PAD_LCD_DATA09__CSI_DATA8                            0x00EC 0x035C 0x0510 0x3 0x0
+#define MX7D_PAD_LCD_DATA09__EIM_DATA9                            0x00EC 0x035C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA09__GPIO3_IO14                           0x00EC 0x035C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA09__SRC_BOOT_CFG9                        0x00EC 0x035C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA10__LCD_DATA10                           0x00F0 0x0360 0x0660 0x0 0x2
+#define MX7D_PAD_LCD_DATA10__CSI_DATA7                            0x00F0 0x0360 0x050C 0x3 0x0
+#define MX7D_PAD_LCD_DATA10__EIM_DATA10                           0x00F0 0x0360 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA10__GPIO3_IO15                           0x00F0 0x0360 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA10__SRC_BOOT_CFG10                       0x00F0 0x0360 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA11__LCD_DATA11                           0x00F4 0x0364 0x0664 0x0 0x2
+#define MX7D_PAD_LCD_DATA11__CSI_DATA6                            0x00F4 0x0364 0x0508 0x3 0x0
+#define MX7D_PAD_LCD_DATA11__EIM_DATA11                           0x00F4 0x0364 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA11__GPIO3_IO16                           0x00F4 0x0364 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA11__SRC_BOOT_CFG11                       0x00F4 0x0364 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA12__LCD_DATA12                           0x00F8 0x0368 0x0668 0x0 0x2
+#define MX7D_PAD_LCD_DATA12__CSI_DATA5                            0x00F8 0x0368 0x0504 0x3 0x0
+#define MX7D_PAD_LCD_DATA12__EIM_DATA12                           0x00F8 0x0368 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA12__GPIO3_IO17                           0x00F8 0x0368 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA12__SRC_BOOT_CFG12                       0x00F8 0x0368 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA13__LCD_DATA13                           0x00FC 0x036C 0x066C 0x0 0x1
+#define MX7D_PAD_LCD_DATA13__CSI_DATA4                            0x00FC 0x036C 0x0500 0x3 0x0
+#define MX7D_PAD_LCD_DATA13__EIM_DATA13                           0x00FC 0x036C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA13__GPIO3_IO18                           0x00FC 0x036C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA13__SRC_BOOT_CFG13                       0x00FC 0x036C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA14__LCD_DATA14                           0x0100 0x0370 0x0670 0x0 0x1
+#define MX7D_PAD_LCD_DATA14__CSI_DATA3                            0x0100 0x0370 0x04FC 0x3 0x0
+#define MX7D_PAD_LCD_DATA14__EIM_DATA14                           0x0100 0x0370 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA14__GPIO3_IO19                           0x0100 0x0370 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA14__SRC_BOOT_CFG14                       0x0100 0x0370 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA15__LCD_DATA15                           0x0104 0x0374 0x0674 0x0 0x1
+#define MX7D_PAD_LCD_DATA15__CSI_DATA2                            0x0104 0x0374 0x04F8 0x3 0x0
+#define MX7D_PAD_LCD_DATA15__EIM_DATA15                           0x0104 0x0374 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA15__GPIO3_IO20                           0x0104 0x0374 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA15__SRC_BOOT_CFG15                       0x0104 0x0374 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA16__LCD_DATA16                           0x0108 0x0378 0x0678 0x0 0x2
+#define MX7D_PAD_LCD_DATA16__FLEXTIMER1_CH4                       0x0108 0x0378 0x0594 0x1 0x0
+#define MX7D_PAD_LCD_DATA16__CSI_DATA1                            0x0108 0x0378 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA16__EIM_CRE                              0x0108 0x0378 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA16__GPIO3_IO21                           0x0108 0x0378 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA16__SRC_BOOT_CFG16                       0x0108 0x0378 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA17__LCD_DATA17                           0x010C 0x037C 0x067C 0x0 0x2
+#define MX7D_PAD_LCD_DATA17__FLEXTIMER1_CH5                       0x010C 0x037C 0x0598 0x1 0x0
+#define MX7D_PAD_LCD_DATA17__CSI_DATA0                            0x010C 0x037C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA17__EIM_ACLK_FREERUN                     0x010C 0x037C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA17__GPIO3_IO22                           0x010C 0x037C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA17__SRC_BOOT_CFG17                       0x010C 0x037C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA18__LCD_DATA18                           0x0110 0x0380 0x0680 0x0 0x2
+#define MX7D_PAD_LCD_DATA18__FLEXTIMER1_CH6                       0x0110 0x0380 0x059C 0x1 0x0
+#define MX7D_PAD_LCD_DATA18__ARM_PLATFORM_EVENTO                  0x0110 0x0380 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA18__CSI_DATA15                           0x0110 0x0380 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA18__EIM_CS2_B                            0x0110 0x0380 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA18__GPIO3_IO23                           0x0110 0x0380 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA18__SRC_BOOT_CFG18                       0x0110 0x0380 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA19__EIM_CS3_B                            0x0114 0x0384 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA19__GPIO3_IO24                           0x0114 0x0384 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA19__SRC_BOOT_CFG19                       0x0114 0x0384 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA19__LCD_DATA19                           0x0114 0x0384 0x0684 0x0 0x2
+#define MX7D_PAD_LCD_DATA19__FLEXTIMER1_CH7                       0x0114 0x0384 0x05A0 0x1 0x0
+#define MX7D_PAD_LCD_DATA19__CSI_DATA14                           0x0114 0x0384 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA20__EIM_ADDR23                           0x0118 0x0388 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA20__GPIO3_IO25                           0x0118 0x0388 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA20__I2C3_SCL                             0x0118 0x0388 0x05E4 0x6 0x1
+#define MX7D_PAD_LCD_DATA20__LCD_DATA20                           0x0118 0x0388 0x0688 0x0 0x2
+#define MX7D_PAD_LCD_DATA20__FLEXTIMER2_CH4                       0x0118 0x0388 0x05BC 0x1 0x0
+#define MX7D_PAD_LCD_DATA20__ENET1_1588_EVENT2_OUT                0x0118 0x0388 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA20__CSI_DATA13                           0x0118 0x0388 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA21__LCD_DATA21                           0x011C 0x038C 0x068C 0x0 0x2
+#define MX7D_PAD_LCD_DATA21__FLEXTIMER2_CH5                       0x011C 0x038C 0x05C0 0x1 0x0
+#define MX7D_PAD_LCD_DATA21__ENET1_1588_EVENT3_OUT                0x011C 0x038C 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA21__CSI_DATA12                           0x011C 0x038C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA21__EIM_ADDR24                           0x011C 0x038C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA21__GPIO3_IO26                           0x011C 0x038C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA21__I2C3_SDA                             0x011C 0x038C 0x05E8 0x6 0x1
+#define MX7D_PAD_LCD_DATA22__LCD_DATA22                           0x0120 0x0390 0x0690 0x0 0x2
+#define MX7D_PAD_LCD_DATA22__FLEXTIMER2_CH6                       0x0120 0x0390 0x05C4 0x1 0x0
+#define MX7D_PAD_LCD_DATA22__ENET2_1588_EVENT2_OUT                0x0120 0x0390 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA22__CSI_DATA11                           0x0120 0x0390 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA22__EIM_ADDR25                           0x0120 0x0390 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA22__GPIO3_IO27                           0x0120 0x0390 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA22__I2C4_SCL                             0x0120 0x0390 0x05EC 0x6 0x1
+#define MX7D_PAD_LCD_DATA23__LCD_DATA23                           0x0124 0x0394 0x0694 0x0 0x2
+#define MX7D_PAD_LCD_DATA23__FLEXTIMER2_CH7                       0x0124 0x0394 0x05C8 0x1 0x0
+#define MX7D_PAD_LCD_DATA23__ENET2_1588_EVENT3_OUT                0x0124 0x0394 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA23__CSI_DATA10                           0x0124 0x0394 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA23__EIM_ADDR26                           0x0124 0x0394 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA23__GPIO3_IO28                           0x0124 0x0394 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA23__I2C4_SDA                             0x0124 0x0394 0x05F0 0x6 0x1
+#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX                      0x0128 0x0398 0x06F4 0x0 0x0
+#define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX                      0x0128 0x0398 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_RX_DATA__I2C1_SCL                          0x0128 0x0398 0x05D4 0x1 0x0
+#define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY                    0x0128 0x0398 0x0000 0x2 0x0
+#define MX7D_PAD_UART1_RX_DATA__ECSPI1_SS1                        0x0128 0x0398 0x0000 0x3 0x0
+#define MX7D_PAD_UART1_RX_DATA__ENET2_1588_EVENT0_IN              0x0128 0x0398 0x0000 0x4 0x0
+#define MX7D_PAD_UART1_RX_DATA__GPIO4_IO0                         0x0128 0x0398 0x0000 0x5 0x0
+#define MX7D_PAD_UART1_RX_DATA__ENET1_MDIO                        0x0128 0x0398 0x0000 0x6 0x0
+#define MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX                      0x012C 0x039C 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX                      0x012C 0x039C 0x06F4 0x0 0x1
+#define MX7D_PAD_UART1_TX_DATA__I2C1_SDA                          0x012C 0x039C 0x05D8 0x1 0x0
+#define MX7D_PAD_UART1_TX_DATA__SAI3_MCLK                         0x012C 0x039C 0x0000 0x2 0x0
+#define MX7D_PAD_UART1_TX_DATA__ECSPI1_SS2                        0x012C 0x039C 0x0000 0x3 0x0
+#define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT             0x012C 0x039C 0x0000 0x4 0x0
+#define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1                         0x012C 0x039C 0x0000 0x5 0x0
+#define MX7D_PAD_UART1_TX_DATA__ENET1_MDC                         0x012C 0x039C 0x0000 0x6 0x0
+#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX                      0x0130 0x03A0 0x06FC 0x0 0x2
+#define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX                      0x0130 0x03A0 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_RX_DATA__I2C2_SCL                          0x0130 0x03A0 0x05DC 0x1 0x0
+#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK                      0x0130 0x03A0 0x06C4 0x2 0x0
+#define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3                        0x0130 0x03A0 0x0000 0x3 0x0
+#define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN              0x0130 0x03A0 0x0000 0x4 0x0
+#define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2                         0x0130 0x03A0 0x0000 0x5 0x0
+#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO                        0x0130 0x03A0 0x0574 0x6 0x1
+#define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX                      0x0134 0x03A4 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX                      0x0134 0x03A4 0x06FC 0x0 0x3
+#define MX7D_PAD_UART2_TX_DATA__I2C2_SDA                          0x0134 0x03A4 0x05E0 0x1 0x0
+#define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0                     0x0134 0x03A4 0x06C8 0x2 0x0
+#define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY                        0x0134 0x03A4 0x0000 0x3 0x0
+#define MX7D_PAD_UART2_TX_DATA__ENET2_1588_EVENT1_OUT             0x0134 0x03A4 0x0000 0x4 0x0
+#define MX7D_PAD_UART2_TX_DATA__GPIO4_IO3                         0x0134 0x03A4 0x0000 0x5 0x0
+#define MX7D_PAD_UART2_TX_DATA__ENET2_MDC                         0x0134 0x03A4 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX                      0x0138 0x03A8 0x0704 0x0 0x2
+#define MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX                      0x0138 0x03A8 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RX_DATA__USB_OTG1_OC                       0x0138 0x03A8 0x072C 0x1 0x0
+#define MX7D_PAD_UART3_RX_DATA__SAI3_RX_SYNC                      0x0138 0x03A8 0x06CC 0x2 0x0
+#define MX7D_PAD_UART3_RX_DATA__ECSPI1_MISO                       0x0138 0x03A8 0x0528 0x3 0x0
+#define MX7D_PAD_UART3_RX_DATA__ENET1_1588_EVENT0_IN              0x0138 0x03A8 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_RX_DATA__GPIO4_IO4                         0x0138 0x03A8 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_RX_DATA__SD1_LCTL                          0x0138 0x03A8 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX                      0x013C 0x03AC 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX                      0x013C 0x03AC 0x0704 0x0 0x3
+#define MX7D_PAD_UART3_TX_DATA__USB_OTG1_PWR                      0x013C 0x03AC 0x0000 0x1 0x0
+#define MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK                      0x013C 0x03AC 0x06D0 0x2 0x0
+#define MX7D_PAD_UART3_TX_DATA__ECSPI1_MOSI                       0x013C 0x03AC 0x052C 0x3 0x0
+#define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT             0x013C 0x03AC 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5                         0x013C 0x03AC 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_TX_DATA__SD2_LCTL                          0x013C 0x03AC 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS                       0x0140 0x03B0 0x0700 0x0 0x2
+#define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS                       0x0140 0x03B0 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC                         0x0140 0x03B0 0x0728 0x1 0x0
+#define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0                       0x0140 0x03B0 0x0000 0x2 0x0
+#define MX7D_PAD_UART3_RTS_B__ECSPI1_SCLK                         0x0140 0x03B0 0x0000 0x3 0x0
+#define MX7D_PAD_UART3_RTS_B__ENET1_1588_EVENT1_IN                0x0140 0x03B0 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_RTS_B__GPIO4_IO6                           0x0140 0x03B0 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_RTS_B__SD3_LCTL                            0x0140 0x03B0 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS                       0x0144 0x03B4 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_CTS_B__UART3_DTE_RTS                       0x0144 0x03B4 0x0700 0x0 0x3
+#define MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR                        0x0144 0x03B4 0x0000 0x1 0x0
+#define MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC                        0x0144 0x03B4 0x06D4 0x2 0x0
+#define MX7D_PAD_UART3_CTS_B__ECSPI1_SS0                          0x0144 0x03B4 0x0530 0x3 0x0
+#define MX7D_PAD_UART3_CTS_B__ENET1_1588_EVENT1_OUT               0x0144 0x03B4 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_CTS_B__GPIO4_IO7                           0x0144 0x03B4 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_CTS_B__SD1_VSELECT                         0x0144 0x03B4 0x0000 0x6 0x0
+#define MX7D_PAD_I2C1_SCL__I2C1_SCL                               0x0148 0x03B8 0x05D4 0x0 0x1
+#define MX7D_PAD_I2C1_SCL__UART4_DCE_CTS                          0x0148 0x03B8 0x0000 0x1 0x0
+#define MX7D_PAD_I2C1_SCL__UART4_DTE_RTS                          0x0148 0x03B8 0x0708 0x1 0x0
+#define MX7D_PAD_I2C1_SCL__FLEXCAN1_RX                            0x0148 0x03B8 0x04DC 0x2 0x1
+#define MX7D_PAD_I2C1_SCL__ECSPI3_MISO                            0x0148 0x03B8 0x0548 0x3 0x0
+#define MX7D_PAD_I2C1_SCL__GPIO4_IO8                              0x0148 0x03B8 0x0000 0x5 0x0
+#define MX7D_PAD_I2C1_SCL__SD2_VSELECT                            0x0148 0x03B8 0x0000 0x6 0x0
+#define MX7D_PAD_I2C1_SDA__I2C1_SDA                               0x014C 0x03BC 0x05D8 0x0 0x1
+#define MX7D_PAD_I2C1_SDA__UART4_DCE_RTS                          0x014C 0x03BC 0x0708 0x1 0x1
+#define MX7D_PAD_I2C1_SDA__UART4_DTE_CTS                          0x014C 0x03BC 0x0000 0x1 0x0
+#define MX7D_PAD_I2C1_SDA__FLEXCAN1_TX                            0x014C 0x03BC 0x0000 0x2 0x0
+#define MX7D_PAD_I2C1_SDA__ECSPI3_MOSI                            0x014C 0x03BC 0x054C 0x3 0x0
+#define MX7D_PAD_I2C1_SDA__CCM_ENET_REF_CLK1                      0x014C 0x03BC 0x0564 0x4 0x1
+#define MX7D_PAD_I2C1_SDA__GPIO4_IO9                              0x014C 0x03BC 0x0000 0x5 0x0
+#define MX7D_PAD_I2C1_SDA__SD3_VSELECT                            0x014C 0x03BC 0x0000 0x6 0x0
+#define MX7D_PAD_I2C2_SCL__I2C2_SCL                               0x0150 0x03C0 0x05DC 0x0 0x1
+#define MX7D_PAD_I2C2_SCL__UART4_DCE_RX                           0x0150 0x03C0 0x070C 0x1 0x0
+#define MX7D_PAD_I2C2_SCL__UART4_DTE_TX                           0x0150 0x03C0 0x0000 0x1 0x0
+#define MX7D_PAD_I2C2_SCL__WDOG3_WDOG_B                           0x0150 0x03C0 0x0000 0x2 0x0
+#define MX7D_PAD_I2C2_SCL__ECSPI3_SCLK                            0x0150 0x03C0 0x0544 0x3 0x0
+#define MX7D_PAD_I2C2_SCL__CCM_ENET_REF_CLK2                      0x0150 0x03C0 0x0570 0x4 0x2
+#define MX7D_PAD_I2C2_SCL__GPIO4_IO10                             0x0150 0x03C0 0x0000 0x5 0x0
+#define MX7D_PAD_I2C2_SCL__SD3_CD_B                               0x0150 0x03C0 0x0738 0x6 0x1
+#define MX7D_PAD_I2C2_SDA__I2C2_SDA                               0x0154 0x03C4 0x05E0 0x0 0x1
+#define MX7D_PAD_I2C2_SDA__UART4_DCE_TX                           0x0154 0x03C4 0x0000 0x1 0x0
+#define MX7D_PAD_I2C2_SDA__UART4_DTE_RX                           0x0154 0x03C4 0x070C 0x1 0x1
+#define MX7D_PAD_I2C2_SDA__WDOG3_WDOG_RST_B_DEB                   0x0154 0x03C4 0x0000 0x2 0x0
+#define MX7D_PAD_I2C2_SDA__ECSPI3_SS0                             0x0154 0x03C4 0x0550 0x3 0x0
+#define MX7D_PAD_I2C2_SDA__CCM_ENET_REF_CLK3                      0x0154 0x03C4 0x0000 0x4 0x0
+#define MX7D_PAD_I2C2_SDA__GPIO4_IO11                             0x0154 0x03C4 0x0000 0x5 0x0
+#define MX7D_PAD_I2C2_SDA__SD3_WP                                 0x0154 0x03C4 0x073C 0x6 0x1
+#define MX7D_PAD_I2C3_SCL__I2C3_SCL                               0x0158 0x03C8 0x05E4 0x0 0x2
+#define MX7D_PAD_I2C3_SCL__UART5_DCE_CTS                          0x0158 0x03C8 0x0000 0x1 0x0
+#define MX7D_PAD_I2C3_SCL__UART5_DTE_RTS                          0x0158 0x03C8 0x0710 0x1 0x0
+#define MX7D_PAD_I2C3_SCL__FLEXCAN2_RX                            0x0158 0x03C8 0x04E0 0x2 0x1
+#define MX7D_PAD_I2C3_SCL__CSI_VSYNC                              0x0158 0x03C8 0x0520 0x3 0x1
+#define MX7D_PAD_I2C3_SCL__SDMA_EXT_EVENT0                        0x0158 0x03C8 0x06D8 0x4 0x1
+#define MX7D_PAD_I2C3_SCL__GPIO4_IO12                             0x0158 0x03C8 0x0000 0x5 0x0
+#define MX7D_PAD_I2C3_SCL__EPDC_BDR0                              0x0158 0x03C8 0x0000 0x6 0x0
+#define MX7D_PAD_I2C3_SDA__I2C3_SDA                               0x015C 0x03CC 0x05E8 0x0 0x2
+#define MX7D_PAD_I2C3_SDA__UART5_DCE_RTS                          0x015C 0x03CC 0x0710 0x1 0x1
+#define MX7D_PAD_I2C3_SDA__UART5_DTE_CTS                          0x015C 0x03CC 0x0000 0x1 0x0
+#define MX7D_PAD_I2C3_SDA__FLEXCAN2_TX                            0x015C 0x03CC 0x0000 0x2 0x0
+#define MX7D_PAD_I2C3_SDA__CSI_HSYNC                              0x015C 0x03CC 0x0518 0x3 0x1
+#define MX7D_PAD_I2C3_SDA__SDMA_EXT_EVENT1                        0x015C 0x03CC 0x06DC 0x4 0x1
+#define MX7D_PAD_I2C3_SDA__GPIO4_IO13                             0x015C 0x03CC 0x0000 0x5 0x0
+#define MX7D_PAD_I2C3_SDA__EPDC_BDR1                              0x015C 0x03CC 0x0000 0x6 0x0
+#define MX7D_PAD_I2C4_SCL__I2C4_SCL                               0x0160 0x03D0 0x05EC 0x0 0x2
+#define MX7D_PAD_I2C4_SCL__UART5_DCE_RX                           0x0160 0x03D0 0x0714 0x1 0x0
+#define MX7D_PAD_I2C4_SCL__UART5_DTE_TX                           0x0160 0x03D0 0x0000 0x1 0x0
+#define MX7D_PAD_I2C4_SCL__WDOG4_WDOG_B                           0x0160 0x03D0 0x0000 0x2 0x0
+#define MX7D_PAD_I2C4_SCL__CSI_PIXCLK                             0x0160 0x03D0 0x051C 0x3 0x1
+#define MX7D_PAD_I2C4_SCL__USB_OTG1_ID                            0x0160 0x03D0 0x0734 0x4 0x1
+#define MX7D_PAD_I2C4_SCL__GPIO4_IO14                             0x0160 0x03D0 0x0000 0x5 0x0
+#define MX7D_PAD_I2C4_SCL__EPDC_VCOM0                             0x0160 0x03D0 0x0000 0x6 0x0
+#define MX7D_PAD_I2C4_SDA__I2C4_SDA                               0x0164 0x03D4 0x05F0 0x0 0x2
+#define MX7D_PAD_I2C4_SDA__UART5_DCE_TX                           0x0164 0x03D4 0x0000 0x1 0x0
+#define MX7D_PAD_I2C4_SDA__UART5_DTE_RX                           0x0164 0x03D4 0x0714 0x1 0x1
+#define MX7D_PAD_I2C4_SDA__WDOG4_WDOG_RST_B_DEB                   0x0164 0x03D4 0x0000 0x2 0x0
+#define MX7D_PAD_I2C4_SDA__CSI_MCLK                               0x0164 0x03D4 0x0000 0x3 0x0
+#define MX7D_PAD_I2C4_SDA__USB_OTG2_ID                            0x0164 0x03D4 0x0730 0x4 0x1
+#define MX7D_PAD_I2C4_SDA__GPIO4_IO15                             0x0164 0x03D4 0x0000 0x5 0x0
+#define MX7D_PAD_I2C4_SDA__EPDC_VCOM1                             0x0164 0x03D4 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK                         0x0168 0x03D8 0x0524 0x0 0x1
+#define MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX                        0x0168 0x03D8 0x071C 0x1 0x2
+#define MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX                        0x0168 0x03D8 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_SCLK__SD2_DATA4                           0x0168 0x03D8 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_SCLK__CSI_DATA2                           0x0168 0x03D8 0x04F8 0x3 0x1
+#define MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16                          0x0168 0x03D8 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_SCLK__EPDC_PWR_COM                        0x0168 0x03D8 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI                         0x016C 0x03DC 0x052C 0x0 0x1
+#define MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX                        0x016C 0x03DC 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX                        0x016C 0x03DC 0x071C 0x1 0x3
+#define MX7D_PAD_ECSPI1_MOSI__SD2_DATA5                           0x016C 0x03DC 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_MOSI__CSI_DATA3                           0x016C 0x03DC 0x04FC 0x3 0x1
+#define MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17                          0x016C 0x03DC 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_MOSI__EPDC_PWR_STAT                       0x016C 0x03DC 0x0580 0x6 0x1
+#define MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO                         0x0170 0x03E0 0x0528 0x0 0x1
+#define MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS                       0x0170 0x03E0 0x0718 0x1 0x2
+#define MX7D_PAD_ECSPI1_MISO__UART6_DTE_CTS                       0x0170 0x03E0 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_MISO__SD2_DATA6                           0x0170 0x03E0 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_MISO__CSI_DATA4                           0x0170 0x03E0 0x0500 0x3 0x1
+#define MX7D_PAD_ECSPI1_MISO__GPIO4_IO18                          0x0170 0x03E0 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_MISO__EPDC_PWR_IRQ                        0x0170 0x03E0 0x057C 0x6 0x0
+#define MX7D_PAD_ECSPI1_SS0__ECSPI1_SS0                           0x0174 0x03E4 0x0530 0x0 0x1
+#define MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS                        0x0174 0x03E4 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_SS0__UART6_DTE_RTS                        0x0174 0x03E4 0x0718 0x1 0x3
+#define MX7D_PAD_ECSPI1_SS0__SD2_DATA7                            0x0174 0x03E4 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_SS0__CSI_DATA5                            0x0174 0x03E4 0x0504 0x3 0x1
+#define MX7D_PAD_ECSPI1_SS0__GPIO4_IO19                           0x0174 0x03E4 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_SS0__EPDC_PWR_CTRL3                       0x0174 0x03E4 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK                         0x0178 0x03E8 0x0534 0x0 0x0
+#define MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX                        0x0178 0x03E8 0x0724 0x1 0x2
+#define MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX                        0x0178 0x03E8 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_SCLK__SD1_DATA4                           0x0178 0x03E8 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_SCLK__CSI_DATA6                           0x0178 0x03E8 0x0508 0x3 0x1
+#define MX7D_PAD_ECSPI2_SCLK__LCD_DATA13                          0x0178 0x03E8 0x066C 0x4 0x2
+#define MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20                          0x0178 0x03E8 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_SCLK__EPDC_PWR_CTRL0                      0x0178 0x03E8 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI                         0x017C 0x03EC 0x053C 0x0 0x0
+#define MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX                        0x017C 0x03EC 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX                        0x017C 0x03EC 0x0724 0x1 0x3
+#define MX7D_PAD_ECSPI2_MOSI__SD1_DATA5                           0x017C 0x03EC 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_MOSI__CSI_DATA7                           0x017C 0x03EC 0x050C 0x3 0x1
+#define MX7D_PAD_ECSPI2_MOSI__LCD_DATA14                          0x017C 0x03EC 0x0670 0x4 0x2
+#define MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21                          0x017C 0x03EC 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_MOSI__EPDC_PWR_CTRL1                      0x017C 0x03EC 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MISO__GPIO4_IO22                          0x0180 0x03F0 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_MISO__EPDC_PWR_CTRL2                      0x0180 0x03F0 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO                         0x0180 0x03F0 0x0538 0x0 0x0
+#define MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS                       0x0180 0x03F0 0x0720 0x1 0x2
+#define MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS                       0x0180 0x03F0 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_MISO__SD1_DATA6                           0x0180 0x03F0 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_MISO__CSI_DATA8                           0x0180 0x03F0 0x0510 0x3 0x1
+#define MX7D_PAD_ECSPI2_MISO__LCD_DATA15                          0x0180 0x03F0 0x0674 0x4 0x2
+#define MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0                           0x0184 0x03F4 0x0540 0x0 0x0
+#define MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS                        0x0184 0x03F4 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS                        0x0184 0x03F4 0x0720 0x1 0x3
+#define MX7D_PAD_ECSPI2_SS0__SD1_DATA7                            0x0184 0x03F4 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_SS0__CSI_DATA9                            0x0184 0x03F4 0x0514 0x3 0x1
+#define MX7D_PAD_ECSPI2_SS0__LCD_RESET                            0x0184 0x03F4 0x0000 0x4 0x0
+#define MX7D_PAD_ECSPI2_SS0__GPIO4_IO23                           0x0184 0x03F4 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_SS0__EPDC_PWR_WAKE                        0x0184 0x03F4 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_CD_B__SD1_CD_B                               0x0188 0x03F8 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CD_B__UART6_DCE_RX                           0x0188 0x03F8 0x071C 0x2 0x4
+#define MX7D_PAD_SD1_CD_B__UART6_DTE_TX                           0x0188 0x03F8 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_CD_B__ECSPI4_MISO                            0x0188 0x03F8 0x0558 0x3 0x1
+#define MX7D_PAD_SD1_CD_B__FLEXTIMER1_CH0                         0x0188 0x03F8 0x0584 0x4 0x1
+#define MX7D_PAD_SD1_CD_B__GPIO5_IO0                              0x0188 0x03F8 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CD_B__CCM_CLKO1                              0x0188 0x03F8 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_WP__SD1_WP                                   0x018C 0x03FC 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_WP__UART6_DCE_TX                             0x018C 0x03FC 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_WP__UART6_DTE_RX                             0x018C 0x03FC 0x071C 0x2 0x5
+#define MX7D_PAD_SD1_WP__ECSPI4_MOSI                              0x018C 0x03FC 0x055C 0x3 0x1
+#define MX7D_PAD_SD1_WP__FLEXTIMER1_CH1                           0x018C 0x03FC 0x0588 0x4 0x1
+#define MX7D_PAD_SD1_WP__GPIO5_IO1                                0x018C 0x03FC 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_WP__CCM_CLKO2                                0x018C 0x03FC 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_RESET_B__SD1_RESET_B                         0x0190 0x0400 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_RESET_B__SAI3_MCLK                           0x0190 0x0400 0x0000 0x1 0x0
+#define MX7D_PAD_SD1_RESET_B__UART6_DCE_RTS                       0x0190 0x0400 0x0718 0x2 0x4
+#define MX7D_PAD_SD1_RESET_B__UART6_DTE_CTS                       0x0190 0x0400 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_RESET_B__ECSPI4_SCLK                         0x0190 0x0400 0x0554 0x3 0x1
+#define MX7D_PAD_SD1_RESET_B__FLEXTIMER1_CH2                      0x0190 0x0400 0x058C 0x4 0x1
+#define MX7D_PAD_SD1_RESET_B__GPIO5_IO2                           0x0190 0x0400 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CLK__SD1_CLK                                 0x0194 0x0404 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CLK__SAI3_RX_SYNC                            0x0194 0x0404 0x06CC 0x1 0x1
+#define MX7D_PAD_SD1_CLK__UART6_DCE_CTS                           0x0194 0x0404 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_CLK__UART6_DTE_RTS                           0x0194 0x0404 0x0718 0x2 0x5
+#define MX7D_PAD_SD1_CLK__ECSPI4_SS0                              0x0194 0x0404 0x0560 0x3 0x1
+#define MX7D_PAD_SD1_CLK__FLEXTIMER1_CH3                          0x0194 0x0404 0x0590 0x4 0x1
+#define MX7D_PAD_SD1_CLK__GPIO5_IO3                               0x0194 0x0404 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CMD__SD1_CMD                                 0x0198 0x0408 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CMD__SAI3_RX_BCLK                            0x0198 0x0408 0x06C4 0x1 0x1
+#define MX7D_PAD_SD1_CMD__ECSPI4_SS1                              0x0198 0x0408 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_CMD__FLEXTIMER2_CH0                          0x0198 0x0408 0x05AC 0x4 0x1
+#define MX7D_PAD_SD1_CMD__GPIO5_IO4                               0x0198 0x0408 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA0__SD1_DATA0                             0x019C 0x040C 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA0__SAI3_RX_DATA0                         0x019C 0x040C 0x06C8 0x1 0x1
+#define MX7D_PAD_SD1_DATA0__UART7_DCE_RX                          0x019C 0x040C 0x0724 0x2 0x4
+#define MX7D_PAD_SD1_DATA0__UART7_DTE_TX                          0x019C 0x040C 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA0__ECSPI4_SS2                            0x019C 0x040C 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA0__FLEXTIMER2_CH1                        0x019C 0x040C 0x05B0 0x4 0x1
+#define MX7D_PAD_SD1_DATA0__GPIO5_IO5                             0x019C 0x040C 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA0__CCM_EXT_CLK1                          0x019C 0x040C 0x04E4 0x6 0x1
+#define MX7D_PAD_SD1_DATA1__SD1_DATA1                             0x01A0 0x0410 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK                          0x01A0 0x0410 0x06D0 0x1 0x1
+#define MX7D_PAD_SD1_DATA1__UART7_DCE_TX                          0x01A0 0x0410 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA1__UART7_DTE_RX                          0x01A0 0x0410 0x0724 0x2 0x5
+#define MX7D_PAD_SD1_DATA1__ECSPI4_SS3                            0x01A0 0x0410 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA1__FLEXTIMER2_CH2                        0x01A0 0x0410 0x05B4 0x4 0x1
+#define MX7D_PAD_SD1_DATA1__GPIO5_IO6                             0x01A0 0x0410 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA1__CCM_EXT_CLK2                          0x01A0 0x0410 0x04E8 0x6 0x1
+#define MX7D_PAD_SD1_DATA2__SD1_DATA2                             0x01A4 0x0414 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC                          0x01A4 0x0414 0x06D4 0x1 0x1
+#define MX7D_PAD_SD1_DATA2__UART7_DCE_CTS                         0x01A4 0x0414 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA2__UART7_DTE_RTS                         0x01A4 0x0414 0x0720 0x2 0x4
+#define MX7D_PAD_SD1_DATA2__ECSPI4_RDY                            0x01A4 0x0414 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA2__FLEXTIMER2_CH3                        0x01A4 0x0414 0x05B8 0x4 0x1
+#define MX7D_PAD_SD1_DATA2__GPIO5_IO7                             0x01A4 0x0414 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA2__CCM_EXT_CLK3                          0x01A4 0x0414 0x04EC 0x6 0x1
+#define MX7D_PAD_SD1_DATA3__SD1_DATA3                             0x01A8 0x0418 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0                         0x01A8 0x0418 0x0000 0x1 0x0
+#define MX7D_PAD_SD1_DATA3__UART7_DCE_RTS                         0x01A8 0x0418 0x0720 0x2 0x5
+#define MX7D_PAD_SD1_DATA3__UART7_DTE_CTS                         0x01A8 0x0418 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA3__ECSPI3_SS1                            0x01A8 0x0418 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA3__FLEXTIMER1_PHA                        0x01A8 0x0418 0x05A4 0x4 0x1
+#define MX7D_PAD_SD1_DATA3__GPIO5_IO8                             0x01A8 0x0418 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA3__CCM_EXT_CLK4                          0x01A8 0x0418 0x04F0 0x6 0x1
+#define MX7D_PAD_SD2_CD_B__SD2_CD_B                               0x01AC 0x041C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CD_B__ENET1_MDIO                             0x01AC 0x041C 0x0568 0x1 0x2
+#define MX7D_PAD_SD2_CD_B__ENET2_MDIO                             0x01AC 0x041C 0x0574 0x2 0x2
+#define MX7D_PAD_SD2_CD_B__ECSPI3_SS2                             0x01AC 0x041C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CD_B__FLEXTIMER1_PHB                         0x01AC 0x041C 0x05A8 0x4 0x1
+#define MX7D_PAD_SD2_CD_B__GPIO5_IO9                              0x01AC 0x041C 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CD_B__SDMA_EXT_EVENT0                        0x01AC 0x041C 0x06D8 0x6 0x2
+#define MX7D_PAD_SD2_WP__SD2_WP                                   0x01B0 0x0420 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_WP__ENET1_MDC                                0x01B0 0x0420 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_WP__ENET2_MDC                                0x01B0 0x0420 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_WP__ECSPI3_SS3                               0x01B0 0x0420 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_WP__USB_OTG1_ID                              0x01B0 0x0420 0x0734 0x4 0x2
+#define MX7D_PAD_SD2_WP__GPIO5_IO10                               0x01B0 0x0420 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_WP__SDMA_EXT_EVENT1                          0x01B0 0x0420 0x06DC 0x6 0x2
+#define MX7D_PAD_SD2_RESET_B__SD2_RESET_B                         0x01B4 0x0424 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_RESET_B__SAI2_MCLK                           0x01B4 0x0424 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_RESET_B__SD2_RESET                           0x01B4 0x0424 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_RESET_B__ECSPI3_RDY                          0x01B4 0x0424 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_RESET_B__USB_OTG2_ID                         0x01B4 0x0424 0x0730 0x4 0x2
+#define MX7D_PAD_SD2_RESET_B__GPIO5_IO11                          0x01B4 0x0424 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CLK__SD2_CLK                                 0x01B8 0x0428 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CLK__SAI2_RX_SYNC                            0x01B8 0x0428 0x06B8 0x1 0x0
+#define MX7D_PAD_SD2_CLK__MQS_RIGHT                               0x01B8 0x0428 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_CLK__GPT4_CLK                                0x01B8 0x0428 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CLK__GPIO5_IO12                              0x01B8 0x0428 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CMD__SD2_CMD                                 0x01BC 0x042C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CMD__SAI2_RX_BCLK                            0x01BC 0x042C 0x06B0 0x1 0x0
+#define MX7D_PAD_SD2_CMD__MQS_LEFT                                0x01BC 0x042C 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_CMD__GPT4_CAPTURE1                           0x01BC 0x042C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CMD__SIM2_PORT1_TRXD                         0x01BC 0x042C 0x06EC 0x4 0x1
+#define MX7D_PAD_SD2_CMD__GPIO5_IO13                              0x01BC 0x042C 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA0__SD2_DATA0                             0x01C0 0x0430 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA0__SAI2_RX_DATA0                         0x01C0 0x0430 0x06B4 0x1 0x0
+#define MX7D_PAD_SD2_DATA0__UART4_DCE_RX                          0x01C0 0x0430 0x070C 0x2 0x2
+#define MX7D_PAD_SD2_DATA0__UART4_DTE_TX                          0x01C0 0x0430 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA0__GPT4_CAPTURE2                         0x01C0 0x0430 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA0__SIM2_PORT1_CLK                        0x01C0 0x0430 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA0__GPIO5_IO14                            0x01C0 0x0430 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA1__SD2_DATA1                             0x01C4 0x0434 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA1__SAI2_TX_BCLK                          0x01C4 0x0434 0x06BC 0x1 0x0
+#define MX7D_PAD_SD2_DATA1__UART4_DCE_TX                          0x01C4 0x0434 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA1__UART4_DTE_RX                          0x01C4 0x0434 0x070C 0x2 0x3
+#define MX7D_PAD_SD2_DATA1__GPT4_COMPARE1                         0x01C4 0x0434 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA1__SIM2_PORT1_RST_B                      0x01C4 0x0434 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA1__GPIO5_IO15                            0x01C4 0x0434 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA2__SD2_DATA2                             0x01C8 0x0438 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA2__SAI2_TX_SYNC                          0x01C8 0x0438 0x06C0 0x1 0x0
+#define MX7D_PAD_SD2_DATA2__UART4_DCE_CTS                         0x01C8 0x0438 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA2__UART4_DTE_RTS                         0x01C8 0x0438 0x0708 0x2 0x2
+#define MX7D_PAD_SD2_DATA2__GPT4_COMPARE2                         0x01C8 0x0438 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA2__SIM2_PORT1_SVEN                       0x01C8 0x0438 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA2__GPIO5_IO16                            0x01C8 0x0438 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA3__SD2_DATA3                             0x01CC 0x043C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA3__SAI2_TX_DATA0                         0x01CC 0x043C 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_DATA3__UART4_DCE_RTS                         0x01CC 0x043C 0x0708 0x2 0x3
+#define MX7D_PAD_SD2_DATA3__UART4_DTE_CTS                         0x01CC 0x043C 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA3__GPT4_COMPARE3                         0x01CC 0x043C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA3__SIM2_PORT1_PD                         0x01CC 0x043C 0x06E8 0x4 0x1
+#define MX7D_PAD_SD2_DATA3__GPIO5_IO17                            0x01CC 0x043C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_CLK__SD3_CLK                                 0x01D0 0x0440 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_CLK__NAND_CLE                                0x01D0 0x0440 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_CLK__ECSPI4_MISO                             0x01D0 0x0440 0x0558 0x2 0x2
+#define MX7D_PAD_SD3_CLK__SAI3_RX_SYNC                            0x01D0 0x0440 0x06CC 0x3 0x2
+#define MX7D_PAD_SD3_CLK__GPT3_CLK                                0x01D0 0x0440 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_CLK__GPIO6_IO0                               0x01D0 0x0440 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_CMD__SD3_CMD                                 0x01D4 0x0444 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_CMD__NAND_ALE                                0x01D4 0x0444 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_CMD__ECSPI4_MOSI                             0x01D4 0x0444 0x055C 0x2 0x2
+#define MX7D_PAD_SD3_CMD__SAI3_RX_BCLK                            0x01D4 0x0444 0x06C4 0x3 0x2
+#define MX7D_PAD_SD3_CMD__GPT3_CAPTURE1                           0x01D4 0x0444 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_CMD__GPIO6_IO1                               0x01D4 0x0444 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA0__SD3_DATA0                             0x01D8 0x0448 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA0__NAND_DATA00                           0x01D8 0x0448 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA0__ECSPI4_SS0                            0x01D8 0x0448 0x0560 0x2 0x2
+#define MX7D_PAD_SD3_DATA0__SAI3_RX_DATA0                         0x01D8 0x0448 0x06C8 0x3 0x2
+#define MX7D_PAD_SD3_DATA0__GPT3_CAPTURE2                         0x01D8 0x0448 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA0__GPIO6_IO2                             0x01D8 0x0448 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA1__SD3_DATA1                             0x01DC 0x044C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA1__NAND_DATA01                           0x01DC 0x044C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA1__ECSPI4_SCLK                           0x01DC 0x044C 0x0554 0x2 0x2
+#define MX7D_PAD_SD3_DATA1__SAI3_TX_BCLK                          0x01DC 0x044C 0x06D0 0x3 0x2
+#define MX7D_PAD_SD3_DATA1__GPT3_COMPARE1                         0x01DC 0x044C 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA1__GPIO6_IO3                             0x01DC 0x044C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA2__SD3_DATA2                             0x01E0 0x0450 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA2__NAND_DATA02                           0x01E0 0x0450 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA2__I2C3_SDA                              0x01E0 0x0450 0x05E8 0x2 0x3
+#define MX7D_PAD_SD3_DATA2__SAI3_TX_SYNC                          0x01E0 0x0450 0x06D4 0x3 0x2
+#define MX7D_PAD_SD3_DATA2__GPT3_COMPARE2                         0x01E0 0x0450 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA2__GPIO6_IO4                             0x01E0 0x0450 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA3__SD3_DATA3                             0x01E4 0x0454 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA3__NAND_DATA03                           0x01E4 0x0454 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA3__I2C3_SCL                              0x01E4 0x0454 0x05E4 0x2 0x3
+#define MX7D_PAD_SD3_DATA3__SAI3_TX_DATA0                         0x01E4 0x0454 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA3__GPT3_COMPARE3                         0x01E4 0x0454 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA3__GPIO6_IO5                             0x01E4 0x0454 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA4__SD3_DATA4                             0x01E8 0x0458 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA4__NAND_DATA04                           0x01E8 0x0458 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA4__UART3_DCE_RX                          0x01E8 0x0458 0x0704 0x3 0x4
+#define MX7D_PAD_SD3_DATA4__UART3_DTE_TX                          0x01E8 0x0458 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA4__FLEXCAN2_RX                           0x01E8 0x0458 0x04E0 0x4 0x2
+#define MX7D_PAD_SD3_DATA4__GPIO6_IO6                             0x01E8 0x0458 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA5__SD3_DATA5                             0x01EC 0x045C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA5__NAND_DATA05                           0x01EC 0x045C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA5__UART3_DCE_TX                          0x01EC 0x045C 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA5__UART3_DTE_RX                          0x01EC 0x045C 0x0704 0x3 0x5
+#define MX7D_PAD_SD3_DATA5__FLEXCAN1_TX                           0x01EC 0x045C 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA5__GPIO6_IO7                             0x01EC 0x045C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA6__SD3_DATA6                             0x01F0 0x0460 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA6__NAND_DATA06                           0x01F0 0x0460 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA6__SD3_WP                                0x01F0 0x0460 0x073C 0x2 0x2
+#define MX7D_PAD_SD3_DATA6__UART3_DCE_RTS                         0x01F0 0x0460 0x0700 0x3 0x4
+#define MX7D_PAD_SD3_DATA6__UART3_DTE_CTS                         0x01F0 0x0460 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA6__FLEXCAN2_TX                           0x01F0 0x0460 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA6__GPIO6_IO8                             0x01F0 0x0460 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA7__SD3_DATA7                             0x01F4 0x0464 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA7__NAND_DATA07                           0x01F4 0x0464 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA7__SD3_CD_B                              0x01F4 0x0464 0x0738 0x2 0x2
+#define MX7D_PAD_SD3_DATA7__UART3_DCE_CTS                         0x01F4 0x0464 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA7__UART3_DTE_RTS                         0x01F4 0x0464 0x0700 0x3 0x5
+#define MX7D_PAD_SD3_DATA7__FLEXCAN1_RX                           0x01F4 0x0464 0x04DC 0x4 0x2
+#define MX7D_PAD_SD3_DATA7__GPIO6_IO9                             0x01F4 0x0464 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_STROBE__SD3_STROBE                           0x01F8 0x0468 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_STROBE__NAND_RE_B                            0x01F8 0x0468 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_STROBE__GPIO6_IO10                           0x01F8 0x0468 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_RESET_B__SD3_RESET_B                         0x01FC 0x046C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_RESET_B__NAND_WE_B                           0x01FC 0x046C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_RESET_B__SD3_RESET                           0x01FC 0x046C 0x0000 0x2 0x0
+#define MX7D_PAD_SD3_RESET_B__SAI3_MCLK                           0x01FC 0x046C 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_RESET_B__GPIO6_IO11                          0x01FC 0x046C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0                      0x0200 0x0470 0x06A0 0x0 0x0
+#define MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B                         0x0200 0x0470 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX                       0x0200 0x0470 0x0714 0x2 0x2
+#define MX7D_PAD_SAI1_RX_DATA__UART5_DTE_TX                       0x0200 0x0470 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX                        0x0200 0x0470 0x04DC 0x3 0x3
+#define MX7D_PAD_SAI1_RX_DATA__SIM1_PORT1_TRXD                    0x0200 0x0470 0x06E4 0x4 0x1
+#define MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12                         0x0200 0x0470 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_DATA__SRC_ANY_PU_RESET                   0x0200 0x0470 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK                       0x0204 0x0474 0x06A8 0x0 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B                         0x0204 0x0474 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX                       0x0204 0x0474 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__UART5_DTE_RX                       0x0204 0x0474 0x0714 0x2 0x3
+#define MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX                        0x0204 0x0474 0x0000 0x3 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SIM1_PORT1_CLK                     0x0204 0x0474 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13                         0x0204 0x0474 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SRC_EARLY_RESET                    0x0204 0x0474 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC                       0x0208 0x0478 0x06AC 0x0 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__NAND_DQS                           0x0208 0x0478 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS                      0x0208 0x0478 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__UART5_DTE_RTS                      0x0208 0x0478 0x0710 0x2 0x2
+#define MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX                        0x0208 0x0478 0x04E0 0x3 0x3
+#define MX7D_PAD_SAI1_TX_SYNC__SIM1_PORT1_RST_B                   0x0208 0x0478 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14                         0x0208 0x0478 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__SRC_INT_BOOT                       0x0208 0x0478 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0                      0x020C 0x047C 0x0000 0x0 0x0
+#define MX7D_PAD_SAI1_TX_DATA__NAND_READY_B                       0x020C 0x047C 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS                      0x020C 0x047C 0x0710 0x2 0x3
+#define MX7D_PAD_SAI1_TX_DATA__UART5_DTE_CTS                      0x020C 0x047C 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX                        0x020C 0x047C 0x0000 0x3 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SIM1_PORT1_SVEN                    0x020C 0x047C 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15                         0x020C 0x047C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SRC_SYSTEM_RESET                   0x020C 0x047C 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SAI1_RX_SYNC                       0x0210 0x0480 0x06A4 0x0 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B                         0x0210 0x0480 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC                       0x0210 0x0480 0x06B8 0x2 0x1
+#define MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL                           0x0210 0x0480 0x05EC 0x3 0x3
+#define MX7D_PAD_SAI1_RX_SYNC__SIM1_PORT1_PD                      0x0210 0x0480 0x06E0 0x4 0x1
+#define MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16                         0x0210 0x0480 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__MQS_RIGHT                          0x0210 0x0480 0x0000 0x6 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SRC_CA7_RESET_B0                   0x0210 0x0480 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK                       0x0214 0x0484 0x069C 0x0 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B                         0x0214 0x0484 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SAI2_RX_BCLK                       0x0214 0x0484 0x06B0 0x2 0x1
+#define MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA                           0x0214 0x0484 0x05F0 0x3 0x3
+#define MX7D_PAD_SAI1_RX_BCLK__FLEXTIMER2_PHA                     0x0214 0x0484 0x05CC 0x4 0x1
+#define MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17                         0x0214 0x0484 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__MQS_LEFT                           0x0214 0x0484 0x0000 0x6 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SRC_CA7_RESET_B1                   0x0214 0x0484 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_MCLK__SAI1_MCLK                             0x0218 0x0488 0x0000 0x0 0x0
+#define MX7D_PAD_SAI1_MCLK__NAND_WP_B                             0x0218 0x0488 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_MCLK__SAI2_MCLK                             0x0218 0x0488 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_MCLK__CCM_PMIC_READY                        0x0218 0x0488 0x04F4 0x3 0x3
+#define MX7D_PAD_SAI1_MCLK__FLEXTIMER2_PHB                        0x0218 0x0488 0x05D0 0x4 0x1
+#define MX7D_PAD_SAI1_MCLK__GPIO6_IO18                            0x0218 0x0488 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_MCLK__SRC_TESTER_ACK                        0x0218 0x0488 0x0000 0x7 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC                       0x021C 0x048C 0x06C0 0x0 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO                        0x021C 0x048C 0x0548 0x1 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX                       0x021C 0x048C 0x070C 0x2 0x4
+#define MX7D_PAD_SAI2_TX_SYNC__UART4_DTE_TX                       0x021C 0x048C 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__UART1_DCE_CTS                      0x021C 0x048C 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS                      0x021C 0x048C 0x06F0 0x3 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__FLEXTIMER2_CH4                     0x021C 0x048C 0x05BC 0x4 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19                         0x021C 0x048C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK                       0x0220 0x0490 0x06BC 0x0 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI                        0x0220 0x0490 0x054C 0x1 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX                       0x0220 0x0490 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__UART4_DTE_RX                       0x0220 0x0490 0x070C 0x2 0x5
+#define MX7D_PAD_SAI2_TX_BCLK__UART1_DCE_RTS                      0x0220 0x0490 0x06F0 0x3 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS                      0x0220 0x0490 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__FLEXTIMER2_CH5                     0x0220 0x0490 0x05C0 0x4 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20                         0x0220 0x0490 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0                      0x0224 0x0494 0x06B4 0x0 0x1
+#define MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK                        0x0224 0x0494 0x0544 0x1 0x1
+#define MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS                      0x0224 0x0494 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_RX_DATA__UART4_DTE_RTS                      0x0224 0x0494 0x0708 0x2 0x4
+#define MX7D_PAD_SAI2_RX_DATA__UART2_DCE_CTS                      0x0224 0x0494 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS                      0x0224 0x0494 0x06F8 0x3 0x2
+#define MX7D_PAD_SAI2_RX_DATA__FLEXTIMER2_CH6                     0x0224 0x0494 0x05C4 0x4 0x1
+#define MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21                         0x0224 0x0494 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_RX_DATA__KPP_COL7                           0x0224 0x0494 0x0610 0x6 0x1
+#define MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0                      0x0228 0x0498 0x0000 0x0 0x0
+#define MX7D_PAD_SAI2_TX_DATA__ECSPI3_SS0                         0x0228 0x0498 0x0550 0x1 0x1
+#define MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS                      0x0228 0x0498 0x0708 0x2 0x5
+#define MX7D_PAD_SAI2_TX_DATA__UART4_DTE_CTS                      0x0228 0x0498 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_DATA__UART2_DCE_RTS                      0x0228 0x0498 0x06F8 0x3 0x3
+#define MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS                      0x0228 0x0498 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_DATA__FLEXTIMER2_CH7                     0x0228 0x0498 0x05C8 0x4 0x1
+#define MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22                         0x0228 0x0498 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_TX_DATA__KPP_ROW7                           0x0228 0x0498 0x0630 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0                 0x022C 0x049C 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__PWM1_OUT                        0x022C 0x049C 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL                        0x022C 0x049C 0x05E4 0x2 0x4
+#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DCE_CTS                   0x022C 0x049C 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DTE_RTS                   0x022C 0x049C 0x06F0 0x3 0x2
+#define MX7D_PAD_ENET1_RGMII_RD0__EPDC_VCOM0                      0x022C 0x049C 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0                       0x022C 0x049C 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__KPP_ROW3                        0x022C 0x049C 0x0620 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1                 0x0230 0x04A0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__PWM2_OUT                        0x0230 0x04A0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA                        0x0230 0x04A0 0x05E8 0x2 0x4
+#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DCE_RTS                   0x0230 0x04A0 0x06F0 0x3 0x3
+#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DTE_CTS                   0x0230 0x04A0 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__EPDC_VCOM1                      0x0230 0x04A0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1                       0x0230 0x04A0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__KPP_COL3                        0x0230 0x04A0 0x0600 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2                 0x0234 0x04A4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX                     0x0234 0x04A4 0x04DC 0x1 0x4
+#define MX7D_PAD_ENET1_RGMII_RD2__ECSPI2_SCLK                     0x0234 0x04A4 0x0534 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DCE_RX                    0x0234 0x04A4 0x06F4 0x3 0x2
+#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DTE_TX                    0x0234 0x04A4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__EPDC_SDCE4                      0x0234 0x04A4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2                       0x0234 0x04A4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__KPP_ROW2                        0x0234 0x04A4 0x061C 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3                 0x0238 0x04A8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX                     0x0238 0x04A8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__ECSPI2_MOSI                     0x0238 0x04A8 0x053C 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DCE_TX                    0x0238 0x04A8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DTE_RX                    0x0238 0x04A8 0x06F4 0x3 0x3
+#define MX7D_PAD_ENET1_RGMII_RD3__EPDC_SDCE5                      0x0238 0x04A8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3                       0x0238 0x04A8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__KPP_COL2                        0x0238 0x04A8 0x05FC 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL           0x023C 0x04AC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__ECSPI2_SS1                   0x023C 0x04AC 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__EPDC_SDCE6                   0x023C 0x04AC 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4                    0x023C 0x04AC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__KPP_ROW1                     0x023C 0x04AC 0x0618 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC                 0x0240 0x04B0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER                     0x0240 0x04B0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__ECSPI2_SS2                      0x0240 0x04B0 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__EPDC_SDCE7                      0x0240 0x04B0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5                       0x0240 0x04B0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__KPP_COL1                        0x0240 0x04B0 0x0000 0x6 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0                 0x0244 0x04B4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__PWM3_OUT                        0x0244 0x04B4 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__ECSPI2_SS3                      0x0244 0x04B4 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__EPDC_SDCE8                      0x0244 0x04B4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6                       0x0244 0x04B4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__KPP_ROW0                        0x0244 0x04B4 0x0614 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1                 0x0248 0x04B8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__PWM4_OUT                        0x0248 0x04B8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__ECSPI2_RDY                      0x0248 0x04B8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__EPDC_SDCE9                      0x0248 0x04B8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7                       0x0248 0x04B8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__KPP_COL0                        0x0248 0x04B8 0x05F4 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2                 0x024C 0x04BC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD2__FLEXCAN2_RX                     0x024C 0x04BC 0x04E0 0x1 0x4
+#define MX7D_PAD_ENET1_RGMII_TD2__ECSPI2_MISO                     0x024C 0x04BC 0x0538 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL                        0x024C 0x04BC 0x05EC 0x3 0x4
+#define MX7D_PAD_ENET1_RGMII_TD2__EPDC_SDOED                      0x024C 0x04BC 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8                       0x024C 0x04BC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3                 0x0250 0x04C0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__FLEXCAN2_TX                     0x0250 0x04C0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__ECSPI2_SS0                      0x0250 0x04C0 0x0540 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA                        0x0250 0x04C0 0x05F0 0x3 0x4
+#define MX7D_PAD_ENET1_RGMII_TD3__EPDC_SDOEZ                      0x0250 0x04C0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9                       0x0250 0x04C0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS                0x0250 0x04C0 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL           0x0254 0x04C4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC                 0x0254 0x04C4 0x06A4 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1                0x0254 0x04C4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2               0x0254 0x04C4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10                   0x0254 0x04C4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC                 0x0258 0x04C8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER                     0x0258 0x04C8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK                    0x0258 0x04C8 0x069C 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2                   0x0258 0x04C8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3                  0x0258 0x04C8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11                      0x0258 0x04C8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_TX_CLK__ENET1_TX_CLK                       0x025C 0x04CC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_TX_CLK__CCM_ENET_REF_CLK1                  0x025C 0x04CC 0x0564 0x1 0x2
+#define MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0                      0x025C 0x04CC 0x06A0 0x2 0x1
+#define MX7D_PAD_ENET1_TX_CLK__GPT2_COMPARE3                      0x025C 0x04CC 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_TX_CLK__EPDC_PWR_IRQ                       0x025C 0x04CC 0x057C 0x4 0x1
+#define MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12                         0x025C 0x04CC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1                       0x025C 0x04CC 0x04E4 0x6 0x2
+#define MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0                     0x025C 0x04CC 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK                       0x0260 0x04D0 0x056C 0x0 0x0
+#define MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B                       0x0260 0x04D0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK                       0x0260 0x04D0 0x06A8 0x2 0x1
+#define MX7D_PAD_ENET1_RX_CLK__GPT2_CLK                           0x0260 0x04D0 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RX_CLK__EPDC_PWR_WAKE                      0x0260 0x04D0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13                         0x0260 0x04D0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RX_CLK__CCM_EXT_CLK2                       0x0260 0x04D0 0x04E8 0x6 0x2
+#define MX7D_PAD_ENET1_RX_CLK__CSU_ALARM_AUT1                     0x0260 0x04D0 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_CRS__ENET1_CRS                             0x0264 0x04D4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_CRS__WDOG2_WDOG_RST_B_DEB                  0x0264 0x04D4 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC                          0x0264 0x04D4 0x06AC 0x2 0x1
+#define MX7D_PAD_ENET1_CRS__GPT2_CAPTURE1                         0x0264 0x04D4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_CRS__EPDC_PWR_CTRL0                        0x0264 0x04D4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_CRS__GPIO7_IO14                            0x0264 0x04D4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_CRS__CCM_EXT_CLK3                          0x0264 0x04D4 0x04EC 0x6 0x2
+#define MX7D_PAD_ENET1_CRS__CSU_ALARM_AUT2                        0x0264 0x04D4 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_COL__ENET1_COL                             0x0268 0x04D8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY                        0x0268 0x04D8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_COL__SAI1_TX_DATA0                         0x0268 0x04D8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_COL__GPT2_CAPTURE2                         0x0268 0x04D8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_COL__EPDC_PWR_CTRL1                        0x0268 0x04D8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_COL__GPIO7_IO15                            0x0268 0x04D8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_COL__CCM_EXT_CLK4                          0x0268 0x04D8 0x04F0 0x6 0x2
+#define MX7D_PAD_ENET1_COL__CSU_INT_DEB                           0x0268 0x04D8 0x0000 0x7 0x0
+
+#endif /* __DTS_IMX7D_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts
new file mode 100644
index 0000000000000..92cb45dacda61
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts
@@ -0,0 +1,595 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "reMarkable 2.0";
+	compatible = "remarkable,imx7d-remarkable2", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	thermal-zones {
+		epd-thermal {
+			thermal-sensors = <&sy7636a>;
+			polling-delay-passive = <30000>;
+			polling-delay = <30000>;
+
+			trips {
+				trip0 {
+					temperature = <49000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <150>;
+	};
+
+	reg_digitizer: regulator-digitizer {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_DIGITIZER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pinctrl_digitizer_reg>;
+		pinctrl-1 = <&pinctrl_digitizer_reg>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>; /* 100 ms */
+	};
+
+	reg_touch: regulator-touch {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_TOUCH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_reg>;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&buck1>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	wacom_digitizer: digitizer@9 {
+		compatible = "hid-over-i2c";
+		reg = <0x09>;
+		hid-descr-addr = <0x01>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wacom>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		vdd-supply = <&reg_digitizer>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	bd71815: pmic@4b {
+		compatible = "rohm,bd71815";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bd71815>;
+		interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		clocks = <&clks IMX7D_CLKO2_ROOT_SRC>;
+		clock-output-names = "bd71815-32k-out";
+		#clock-cells = <0>;
+		#gpio-cells = <2>;
+
+		regulators {
+			buck1: buck1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2: buck2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck3: buck3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: buck4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: buck5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: ldo3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: ldo4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: ldo5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6: ldodvref {
+				regulator-name = "ldodvref";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7: ldolpsr {
+				regulator-name = "ldolpsr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			boost: wled {
+				regulator-name = "wled";
+				regulator-min-microamp = <10>;
+				regulator-max-microamp = <25000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_touch>;
+		touchscreen-size-x = <880>;
+		touchscreen-size-y = <1280>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			reg = <0>;
+			linux,keycodes = <KEY_HOMEPAGE>;
+		};
+
+		button@1 {
+			reg = <1>;
+			linux,keycodes = <KEY_MENU>;
+		};
+
+		button@2 {
+			reg = <2>;
+			linux,keycodes = <KEY_BACK>;
+		};
+
+		button@3 {
+			reg = <3>;
+			linux,keycodes = <KEY_SEARCH>;
+		};
+
+		button@4 {
+			reg = <4>;
+			linux,keycodes = <KEY_VOLUMEDOWN>;
+		};
+
+		button@5 {
+			reg = <5>;
+			linux,keycodes = <KEY_VOLUMEUP>;
+		};
+
+		button@6 {
+			reg = <6>;
+			linux,keycodes = <KEY_CAMERA>;
+		};
+
+		button@7 {
+			reg = <7>;
+			linux,keycodes = <KEY_POWER>;
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	sy7636a: pmic@62 {
+		compatible = "silergy,sy7636a";
+		reg = <0x62>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_epdpmic>;
+		#thermal-sensor-cells = <0>;
+		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			reg_epdpmic: vcom {
+				regulator-name = "vcom";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&usbotg2 {
+	srp-disable;
+	hnp-disable;
+	status = "okay";
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	vmmc-supply = <&reg_brcm>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc_lpsr {
+	pinctrl_digitizer_reg: digitizerreggrp {
+		fsl,pins = <
+			/* DIGITIZER_PWR_EN */
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14
+		>;
+	};
+
+	pinctrl_wacom: wacomgrp {
+		fsl,pins = <
+			/*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x00000014 FWE */
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x00000074 /* PDCTB */
+			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x00000034 /* WACOM INT */
+			/*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x00000014 WACOM PWR ENABLE */
+			/*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x00000074 WACOM RESET */
+		>;
+	};
+};
+
+&iomuxc {
+	pinctrl_bd71815: bd71815grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x59
+		>;
+	};
+
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			/* WIFI_PWR_EN */
+			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
+		>;
+	};
+
+	pinctrl_epdpmic: epdpmicgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x00000074
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x00000014
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* CYTTSP interrupt */
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x54
+			/* CYTTSP reset */
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x04
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_touch_reg: touchreggrp {
+		fsl,pins = <
+			/* TOUCH_PWR_EN */
+			MX7D_PAD_GPIO1_IO11__GPIO1_IO11		0x14
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX		0x79
+			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX		0x79
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY	0x74
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			/* WiFi Reg On */
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x00000014
+			/* WiFi Sleep 32k */
+			MX7D_PAD_SD1_WP__CCM_CLKO2		0x00000014
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sbc-imx7.dts
new file mode 100644
index 0000000000000..f8a8685527071
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sbc-imx7.dts
@@ -0,0 +1,42 @@
+/*
+ * Support for CompuLab SBC-iMX7 Single Board Computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ */
+
+#include "imx7d-cl-som-imx7.dts"
+
+/ {
+	model = "CompuLab SBC-iMX7";
+	compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts
new file mode 100644
index 0000000000000..cabdaa6dc518d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx7d-sdb.dts"
+
+/ {
+	model = "Freescale i.MX7 SabreSD RevA Board";
+	compatible = "fsl,imx7d-sdb-reva", "fsl,imx7d";
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&fec2 {
+	/delete-property/phy-supply;
+};
+
+&iomuxc {
+	imx7d-sdb {
+		pinctrl_tsc2046_pendown: tsc2046_pendown {
+			fsl,pins = <
+				MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x59
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
+			>;
+		};
+
+		pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp {
+			fsl,pins = <
+				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb-sht11.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-sht11.dts
new file mode 100644
index 0000000000000..996555596d402
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-sht11.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+#include "imx7d-sdb.dts"
+
+/ {
+	sensor {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sensor>;
+		compatible = "sensirion,sht15";
+		clk-gpios = <&gpio4 12 0>;
+		data-gpios = <&gpio4 13 0>;
+		vcc-supply = <&reg_sht15>;
+	};
+
+	reg_sht15: regulator-sht15 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_sht15";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_sensor: sensorgrp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__GPIO4_IO13	0x4000007f
+			MX7D_PAD_I2C3_SCL__GPIO4_IO12	0x4000007f
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
new file mode 100644
index 0000000000000..75f1cd14bea18
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
@@ -0,0 +1,904 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "Freescale i.MX7 SabreSD Board";
+	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	spi-4 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		sck-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		extended_io: gpio-expander@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SD1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <200000>;
+		off-on-delay-us = <20000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "brcm_reg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_3v3: regulator-can2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_fec2_3v3: regulator-fec2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec2-3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enet2_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel {
+		compatible = "innolux,at043tn24";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx7d-evk-wm8960",
+			     "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&codec>;
+		hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT1", "AMIC",
+			"AMIC", "MICB";
+	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-sii902x";
+		model = "sii902x-audio";
+		audio-cpu = <&sai3>;
+		hdmi-out;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tsc2046@0 {
+		compatible = "ti,tsc2046";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <29 0>;
+		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
+		touchscreen-max-pressure = <255>;
+		wakeup-source;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec2_3v3>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		wlf,hp-cfg = <2 2 3>;
+		wlf,gpio-cfg = <1 3>;
+		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
+				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+		assigned-clock-rates = <0>, <884736000>, <12288000>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&reg_1p0d {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_1p2 {
+	vin-supply = <&sw2_reg>;
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <884736000>, <36864000>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>;
+	assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
+			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+			  <&clks IMX7D_SAI3_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <884736000>, <36864000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	wakeup-source;
+	keep-power-in-suspend;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	fsl,tuning-step = <2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx7d-sdb {
+		pinctrl_brcm_reg: brcmreggrp {
+			fsl,pins = <
+				MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x14
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO	0x2
+				MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI	0x2
+				MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK	0x2
+				MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x59
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
+				MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
+				MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+				MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+				MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+				MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+				MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+				MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+				MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+				MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+				MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+				MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+				MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+				MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
+				MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
+				MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
+				MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
+				MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
+				MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
+				MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
+				MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
+				MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
+				MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
+				MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
+				MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
+			>;
+		};
+
+		pinctrl_enet2_reg: enet2reggrp {
+			fsl,pins = <
+				MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x14
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
+				MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
+			>;
+		};
+
+		pinctrl_flexcan2_reg: flexcan2reggrp {
+			fsl,pins = <
+				MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x59	/* CAN_STBY */
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x59
+				MX7D_PAD_SD2_WP__GPIO5_IO10		0x59
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
+				MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x59  /* headphone detect */
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+				MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+				MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+				MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_lcdif: lcdifgrp {
+			fsl,pins = <
+				MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+				MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+				MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+				MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+				MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+				MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+				MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+				MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+				MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+				MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+				MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+				MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+				MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+				MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+				MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+				MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+				MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+				MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+				MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+				MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+				MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+				MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+				MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+				MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+				MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+				MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+				MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+				MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+				MX7D_PAD_LCD_RESET__LCD_RESET		0x79
+			>;
+		};
+
+		pinctrl_sai1: sai1grp {
+			fsl,pins = <
+				MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+				MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
+				MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
+				MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+				MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+			>;
+		};
+
+		pinctrl_sai2: sai2grp {
+			fsl,pins = <
+				MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK     0x1f
+				MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC     0x1f
+				MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0    0x30
+				MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0    0x1f
+			>;
+		};
+
+		pinctrl_sai3: sai3grp {
+			fsl,pins = <
+				MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK   0x1f
+				MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC     0x1f
+				MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0    0x30
+			>;
+		};
+
+		pinctrl_spi4: spi4grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
+				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
+				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
+			>;
+		};
+
+		pinctrl_tsc2046_pendown: tsc2046_pendown {
+			fsl,pins = <
+				MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+				MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX	0x79
+				MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX	0x79
+				MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS	0x79
+				MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS	0x79
+			>;
+		};
+
+		pinctrl_uart6: uart6grp {
+			fsl,pins = <
+				MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
+				MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
+				MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
+				MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
+			>;
+		};
+
+		pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
+			fsl,pins = <
+				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
+				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
+				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
+				MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59 /* VSELECT */
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+				MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+			fsl,pins = <
+				MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
+				MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
+				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+			fsl,pins = <
+				MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
+				MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
+				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+				MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
+				MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
+				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
+				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
+				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
+				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
+				MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
+				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
+				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
+				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
+				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
+			>;
+		};
+
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+				MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+				MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+				MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
+			>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B		0x74
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x30
+		>;
+	};
+
+	pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	  0x14
+		>;
+	};
+
+	pinctrl_sai3_mclk: sai3grp_mclk {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK	0x1f
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
new file mode 100644
index 0000000000000..85b97b5f64e72
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright (C) 2020 PHYTEC Messtechnik GmbH
+// Author: Jens Lang  <J.Lang@phytec.de>
+// Copyright (C) 2021 Fabio Estevam <festevam@denx.de>
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx7d.dtsi"
+
+/ {
+	model = "Storopack SMEGW01 board";
+	compatible = "storopack,imx7d-smegw01", "fsl,imx7d";
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_lte_on: regulator-lte-on {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lte_on>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "lte_on";
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_lte_nreset: regulator-lte-nreset {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lte_nreset>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "LTE_nReset";
+		gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		regulator-name = "wifi_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_wlan_rfkill: regulator-wlan-rfkill {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rfkill>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "wlan_rfkill";
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	sram@0 {
+		compatible = "microchip,48l640";
+		reg = <0>;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id0022.1622",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+
+		ethphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-id0022.1622",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 =<&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		reg = <0x52>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_lpsr>;
+	dr_mode = "otg";
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	over-current-active-low;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	max-frequency = <200000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <1>;
+	non-removable;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19	0x04
+			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x04
+			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x04
+			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x04
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x5
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x5
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x5
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x5
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x5
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x5
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x5
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x5
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x5
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x5
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO		0x7
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC		0x7
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC	0x5
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0	0x5
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1	0x5
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2	0x5
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3	0x5
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0	0x5
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1	0x5
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2	0x5
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3	0x5
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC	0x5
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x08
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000004
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000004
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x0b0b0
+			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x0b0b0
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x0b0b0
+		>;
+	};
+
+	pinctrl_lte_on: lteongrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x17059
+		>;
+	};
+
+	pinctrl_lte_nreset: ltenresetgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x17059
+		>;
+	};
+
+	pinctrl_rfkill: rfkillgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x17059
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x74
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x7c
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x7c
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x74
+		>;
+	};
+
+	pinctrl_usbotg1_lpsr: usbotg1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x04
+		>;
+	};
+
+	pinctrl_usbotg1_pwr: usbotg1-pwrgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR	0x04
+		>;
+	};
+
+	pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x04
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x5c
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+			MX7D_PAD_SD2_CD_B__SD2_CD_B		0x08
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5d
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1d
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5d
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5d
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5d
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5d
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5d
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5d
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5d
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5d
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1d
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5e
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1e
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5e
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5e
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5e
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5e
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5e
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5e
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5e
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5e
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1e
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5f
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x0f
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5f
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5f
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5f
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5f
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5f
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5f
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5f
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5f
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1f
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x04
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x04
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-tqma7.dtsi
new file mode 100644
index 0000000000000..3ee2017c1ab37
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-tqma7.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ-Systems TQMa7D board with NXP i.MX7Dual SoC.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-tqma7.dtsi"
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts
new file mode 100644
index 0000000000000..521493342fe97
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device tree file for ZII's RMU2 board
+ *
+ * RMU - Remote Modem Unit
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include <dt-bindings/thermal/thermal.h>
+#include "imx7d.dtsi"
+
+/ {
+	model = "ZII RMU2 Board";
+	compatible = "zii,imx7d-rmu2", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&fec1_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fec1_phy: ethernet-phy@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy_reset>,
+				    <&pinctrl_enet1_phy_interrupt>;
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+
+	mcu {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x2
+			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x2
+			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x2
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19         0x59
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO				0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC				0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL		0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL		0x1
+		>;
+	};
+
+	pinctrl_enet1_phy_reset: enet1phyresetgrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14
+
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_leds_debug: ledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x59
+		>;
+	};
+
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
+			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA0__UART4_DCE_RX	0x79
+			MX7D_PAD_SD2_DATA1__UART4_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x59
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp {
+		fsl,phy = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x08
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rpu2.dts
new file mode 100644
index 0000000000000..decc19af3b83c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rpu2.dts
@@ -0,0 +1,923 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device tree file for ZII's RPU2 board
+ *
+ * RPU - Remote Peripheral Unit
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include <dt-bindings/thermal/thermal.h>
+#include "imx7d.dtsi"
+
+/ {
+	model = "ZII RPU2 Board";
+	compatible = "zii,imx7d-rpu2", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	cs2000_ref: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	cs2000_in_dummy: dummy-oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc2 1>;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_stby>;
+		regulator-name = "can1-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_stby>;
+		regulator-name = "can2-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "GEN_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v_main: regulator-5p0v-main {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	sound1 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Audio Output 1";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound1_codec>;
+		simple-audio-card,frame-master = <&sound1_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPLEFT",
+			"Headphone Jack", "HPRIGHT",
+			"LEFTIN", "HPL",
+			"RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa1>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		sound1_codec: simple-audio-card,codec {
+			sound-dai = <&codec1>;
+			clocks = <&cs2000>;
+		};
+	};
+
+	sound2 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Audio Output 2";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound2_codec>;
+		simple-audio-card,frame-master = <&sound2_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPLEFT",
+			"Headphone Jack", "HPRIGHT",
+			"LEFTIN", "HPL",
+			"RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa2>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		sound2_codec: simple-audio-card,codec {
+			sound-dai = <&codec2>;
+			clocks = <&cs2000>;
+		};
+	};
+
+	sound3 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Audio Output 3";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound3_codec>;
+		simple-audio-card,frame-master = <&sound3_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPLEFT",
+			"Headphone Jack", "HPRIGHT",
+			"LEFTIN", "HPL",
+			"RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa3>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		sound3_codec: simple-audio-card,codec {
+			sound-dai = <&codec3>;
+			clocks = <&cs2000>;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <884736000>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		switch: switch@0 {
+			compatible = "marvell,mv88e6085";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+			reg = <0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_1000_2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "pic";
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&fec1>;
+					phy-mode = "rgmii-id";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "gigabit_proc";
+					ethernet = <&fec2>;
+					phy-mode = "rgmii-id";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	fsl,magic-packet;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+
+	gpio-line-names = "", "", "", "", "", "", "", "",
+			  "", "",
+			  "usb_1_en_b",
+			  "usb_2_en_b",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+
+	gpio-line-names = "12v_out_en_1",
+			  "12v_out_en_2",
+			  "12v_out_en_3",
+			  "28v_out_en_5",
+			  "28v_out_en_1",
+			  "28v_out_en_2",
+			  "28v_out_en_3",
+			  "28v_out_en_4",
+			  "", "",
+			  "usb_3_en_b",
+			  "usb_4_en_b",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	cs2000: clkgen@4e {
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4e>;
+		#clock-cells = <0>;
+		clock-names = "clk_in", "ref_clk";
+		clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24000000>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec2: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec2>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_3p3v>;
+		SPRVDD-supply = <&reg_3p3v>;
+		SPLVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&vgen4_reg>;
+		gpio-reset = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	};
+
+	hpa2: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa2>;
+		reg = <0x60>;
+		power-gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0v_main>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec3: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec3>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_3p3v>;
+		SPRVDD-supply = <&reg_3p3v>;
+		SPLVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&vgen4_reg>;
+		gpio-reset = <&gpio1 7 GPIO_ACTIVE_LOW>;
+	};
+
+	hpa3: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa3>;
+		reg = <0x60>;
+		power-gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0v_main>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec1: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec1>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_3p3v>;
+		SPRVDD-supply = <&reg_3p3v>;
+		SPLVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&vgen4_reg>;
+		gpio-reset = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	};
+
+	hpa1: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa1>;
+		reg = <0x60>;
+		power-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0v_main>;
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX7D_SAI2_ROOT_SRC>,
+			  <&clks IMX7D_SAI2_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
+			  <&clks IMX7D_SAI3_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+
+	mcu {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x2
+			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x2
+			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x2
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19         0x59
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO				0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC				0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL		0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL		0x1
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC			0x1
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0			0x1
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1			0x1
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2			0x1
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3			0x1
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL			0x1
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC			0x1
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0			0x1
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1			0x1
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2			0x1
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3			0x1
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL			0x1
+			MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT		0x1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x59
+			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x59
+		>;
+	};
+
+	pinctrl_flexcan1_stby: flexcan1stbygrp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO08__GPIO1_IO8		0x59
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
+		>;
+	};
+
+	pinctrl_flexcan2_stby: flexcan2stbygrp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x59
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x00
+			MX7D_PAD_GPIO1_IO11__GPIO1_IO11		0x00
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x00
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x00
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x00
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x03
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x03
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x03
+			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x03
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x03
+			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x00
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x00
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x4000007f
+			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x4000007f
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x4000007f
+		>;
+	};
+
+	pinctrl_leds_debug: debuggrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x59
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x30
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK	0x1f
+			MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC	0x1f
+			MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0	0x30
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK	0x1f
+			MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC	0x1f
+			MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0	0x30
+		>;
+	};
+
+	pinctrl_tpa1: tpa6130-1grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x40000038
+		>;
+	};
+
+	pinctrl_tpa2: tpa6130-2grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x40000038
+		>;
+	};
+
+	pinctrl_tpa3: tpa6130-3grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x40000038
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
+			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA0__UART4_DCE_RX	0x79
+			MX7D_PAD_SD2_DATA1__UART4_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x59
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_codec1: dac1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x40000038
+		>;
+	};
+
+	pinctrl_codec2: dac2grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x40000038
+		>;
+	};
+
+	pinctrl_codec3: dac3grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x40000038
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x08
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
new file mode 100644
index 0000000000000..4b94b8afb55d9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
+// Copyright 2016 Toradex AG
+
+#include "imx7s.dtsi"
+#include <dt-bindings/reset/imx7-reset.h>
+
+/ {
+	aliases {
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usb2 = &usbh;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			clock-frequency = <996000000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			nvmem-cells = <&fuse_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clock-frequency = <996000000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_sleep_wait>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0xd>, <0x7>;
+			opp-suspend;
+		};
+
+		opp-996000000 {
+			opp-hz = /bits/ 64 <996000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0xc>, <0x7>;
+			opp-suspend;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1225000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0x8>, <0x3>;
+			opp-suspend;
+		};
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY2_CLK>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	soc: soc {
+		etm@3007d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007d000 0x1000>;
+
+			/*
+			 * System will hang if added nosmp in kernel command line
+			 * without arm,primecell-periphid because amba bus try to
+			 * read id and core1 power off at this time.
+			 */
+			arm,primecell-periphid = <0xbb956>;
+			cpu = <&cpu1>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@31001000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			reg = <0x31001000 0x1000>,
+			      <0x31002000 0x2000>,
+			      <0x31004000 0x2000>,
+			      <0x31006000 0x2000>;
+		};
+
+		pcie: pcie@33800000 {
+			compatible = "fsl,imx7d-pcie";
+			reg = <0x33800000 0x4000>,
+			      <0x4ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			/*
+			 * Reference manual lists pci irqs incorrectly
+			 * Real hardware ordering is same as imx6: D+MSI, C, B, A
+			 */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
+				 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
+				 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy";
+			assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
+					  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
+			assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
+						 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+
+			fsl,max-link-speed = <2>;
+			power-domains = <&pgc_pcie_phy>;
+			resets = <&src IMX7_RESET_PCIEPHY>,
+				 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			fsl,imx7d-pcie-phy = <&pcie_phy>;
+			status = "disabled";
+		};
+	};
+};
+
+&aips2 {
+	pcie_phy: pcie-phy@306d0000 {
+		  compatible = "fsl,imx7d-pcie-phy";
+		  reg = <0x306d0000 0x10000>;
+		  status = "disabled";
+	};
+
+	pxp: pxp@30700000 {
+		compatible = "fsl,imx7d-pxp";
+		reg = <0x30700000 0x10000>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_PXP_CLK>;
+		clock-names = "axi";
+	};
+};
+
+&aips3 {
+	usbotg2: usb@30b20000 {
+		compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+		reg = <0x30b20000 0x200>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_USB_CTRL_CLK>;
+		fsl,usbphy = <&usbphynop2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		phy-clkgate-delay-us = <400>;
+		status = "disabled";
+	};
+
+	usbmisc2: usbmisc@30b20200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x30b20200 0x200>;
+	};
+
+	fec2: ethernet@30bf0000 {
+		compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+		reg = <0x30bf0000 0x10000>;
+		interrupt-names = "int0", "int1", "int2", "pps";
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_ENET2_IPG_ROOT_CLK>,
+			<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+			<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+			<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+			<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+		clock-names = "ipg", "ahb", "ptp",
+			"enet_clk_ref", "enet_out";
+		fsl,num-tx-queues = <3>;
+		fsl,num-rx-queues = <3>;
+		fsl,stop-mode = <&gpr 0x10 4>;
+		status = "disabled";
+	};
+};
+
+&ca_funnel_in_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@1 {
+		reg = <1>;
+		ca_funnel_in_port1: endpoint {
+			remote-endpoint = <&etm1_out_port>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-colibri-aster.dts b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-aster.dts
new file mode 100644
index 0000000000000..58ebb02d948a6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-aster.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ *
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7s-aster",
+		     "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-eval-v3.dts
new file mode 100644
index 0000000000000..38de76630d6a5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-eval-v3.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016-2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx7s-eval-v3",
+		     "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris-v2.dts
new file mode 100644
index 0000000000000..72b5c17ab1abb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris-v2.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Iris V2 Carrier Board";
+	compatible = "toradex,colibri-imx7s-iris-v2",
+		     "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&gpio7 {
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris.dts b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris.dts
new file mode 100644
index 0000000000000..26ba72c17feb7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Iris Carrier Board";
+	compatible = "toradex,colibri-imx7s-iris",
+		     "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s-colibri.dtsi
new file mode 100644
index 0000000000000..ef51395d35377
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016-2022 Toradex
+ */
+
+#include "imx7s.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+/* NAND */
+&gpmi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-mba7.dts b/arch/arm/boot/dts/nxp/imx/imx7s-mba7.dts
new file mode 100644
index 0000000000000..8e4cf589c92c1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-mba7.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Source for TQ-Systems TQMa7S board on MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx7s-tqma7.dtsi"
+#include "imx7-mba7.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa7S board on MBa7 carrier board";
+	compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s-tqma7.dtsi
new file mode 100644
index 0000000000000..7a190fdb2d30c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-tqma7.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ-Systems TQMa7S board with NXP i.MX7Solo SoC.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+#include "imx7s.dtsi"
+#include "imx7-tqma7.dtsi"
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
new file mode 100644
index 0000000000000..ba7231b364bb8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 NXP Semiconductors.
+ * Author: Fabio Estevam <fabio.estevam@nxp.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7s.dtsi"
+
+/ {
+	model = "Element14 Warp i.MX7 Board";
+	compatible = "element14,imx7s-warp", "fsl,imx7s";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio>;
+		autorepeat;
+
+		back {
+			label = "Back";
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	reg_bt: regulator-bt {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_reg>;
+		enable-active-high;
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		regulator-name = "bt_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_peri_3p15v: regulator-peri-3p15v {
+		compatible = "regulator-fixed";
+		regulator-name = "peri_3p15v_reg";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <884736000>;
+};
+
+&csi {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ov2680: camera@36 {
+		compatible = "ovti,ov2680";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov2680>;
+		reg = <0x36>;
+		clocks = <&osc>;
+		clock-names = "xvclk";
+		reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		DOVDD-supply = <&sw2_reg>;
+		DVDD-supply = <&sw2_reg>;
+		AVDD-supply = <&reg_peri_3p15v>;
+
+		port {
+			ov2680_to_mipi: endpoint {
+				remote-endpoint = <&mipi_from_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		VDDA-supply = <&vgen4_reg>;
+		VDDIO-supply = <&vgen4_reg>;
+		VDDD-supply = <&vgen2_reg>;
+	};
+
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&mipi_csi {
+	clock-frequency = <166000000>;
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+
+			mipi_from_sensor: endpoint {
+				remote-endpoint = <&ov2680_to_mipi>;
+				data-lanes = <1>;
+			};
+		};
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart3  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	no-1-8-v;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&video_mux {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_WP__GPIO5_IO10	0x14 /* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_bt_reg: btreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17	0x14 /* BT_REG_ON */
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1	0x14
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA	0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA	0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SCL__I2C4_SCL	0x4000007f
+			MX7D_PAD_I2C4_SDA__I2C4_SDA	0x4000007f
+		>;
+	};
+
+	pinctrl_ov2680: ov2660grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x14
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1f
+			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x30
+		>;
+	};
+
+	pinctrl_sai1_mclk: sai1mclkgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
+			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x79
+			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX	0x79
+			MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1b
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
new file mode 100644
index 0000000000000..6ffb428dc939c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -0,0 +1,1296 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
+// Copyright 2016 Toradex AG
+
+#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/power/imx7-power.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/imx7-reset.h>
+#include "imx7d-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usb0 = &usbotg1;
+		usb1 = &usbh;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep_wait: cpu-sleep-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <100>;
+				exit-latency-us = <50>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <792000000>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX7D_CLK_ARM>;
+			cpu-idle-states = <&cpu_sleep_wait>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			nvmem-cells = <&fuse_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0xf>, <0xf>;
+		};
+	};
+
+	ckil: clock-cki {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY1_CLK>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	usbphynop3: usbphynop3 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+		clock-names = "main_clk";
+		power-domains = <&pgc_hsic_phy>;
+		#phy-cells = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	replicator {
+		/*
+		 * non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell"
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+				/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator_in_port0: endpoint {
+					remote-endpoint = <&etf_out_port>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		funnel@30041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x30041000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			ca_funnel_in_ports: in-ports {
+				port {
+					ca_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+
+				/* the other input ports are not connect to anything */
+			};
+
+			out-ports {
+				port {
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+
+			};
+		};
+
+		etm@3007c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007c000 0x1000>;
+			cpu = <&cpu0>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel@30083000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x30083000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					hugo_funnel_in_port0: endpoint {
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					hugo_funnel_in_port1: endpoint {
+						/* M4 input */
+					};
+				};
+				/* the other input ports are not connect to anything */
+			};
+
+			out-ports {
+				port {
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+			};
+		};
+
+		etf@30084000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30084000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etf_in_port: endpoint {
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out_port: endpoint {
+						remote-endpoint = <&replicator_in_port0>;
+					};
+				};
+			};
+		};
+
+		etr@30086000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30086000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port1>;
+					};
+				};
+			};
+		};
+
+		tpiu@30087000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x30087000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpiu_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port0>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@31001000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			reg = <0x31001000 0x1000>,
+			      <0x31002000 0x2000>,
+			      <0x31004000 0x2000>,
+			      <0x31006000 0x2000>;
+		};
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30000000 0x400000>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 13 32>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 45 29>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 74 24>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 98 18>;
+			};
+
+			gpio6: gpio@30250000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30250000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 116 23>;
+			};
+
+			gpio7: gpio@30260000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30260000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 139 16>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog4: watchdog@302b0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			iomuxc_lpsr: pinctrl@302c0000 {
+				compatible = "fsl,imx7d-iomuxc-lpsr";
+				reg = <0x302c0000 0x10000>;
+				fsl,input-sel = <&iomuxc>;
+			};
+
+			gpt1: timer@302d0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302d0000 0x10000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
+					 <&clks IMX7D_GPT1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: timer@302e0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302e0000 0x10000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
+					 <&clks IMX7D_GPT2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt3: timer@302f0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302f0000 0x10000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
+					 <&clks IMX7D_GPT3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt4: timer@30300000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x30300000 0x10000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
+					 <&clks IMX7D_GPT4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			kpp: keypad@30320000 {
+				compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
+				reg = <0x30320000 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_KPP_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx7d-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx7d-iomuxc-gpr",
+					"fsl,imx6q-iomuxc-gpr", "syscon",
+					"simple-mfd";
+				reg = <0x30340000 0x10000>;
+
+				mux: mux-controller {
+					compatible = "mmio-mux";
+					#mux-control-cells = <1>;
+					mux-reg-masks = <0x14 0x00000010>;
+				};
+
+				video_mux: csi-mux {
+					compatible = "video-mux";
+					mux-controls = <&mux 0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						csi_mux_from_mipi_vc0: endpoint {
+							remote-endpoint = <&mipi_vc0_to_csi_mux>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						csi_mux_to_csi: endpoint {
+							remote-endpoint = <&csi_from_csi_mux>;
+						};
+					};
+				};
+			};
+
+			ocotp: efuse@30350000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx7d-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clks IMX7D_OCOTP_CLK>;
+
+				tempmon_calib: calib@3c {
+					reg = <0x3c 0x4>;
+				};
+
+				fuse_grade: fuse-grade@10 {
+					reg = <0x10 0x4>;
+				};
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
+					"syscon", "simple-mfd";
+				reg = <0x30360000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_1p0d: regulator-vdd1p0d {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p0d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					anatop-reg-offset = <0x210>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <8>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1200000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_1p2: regulator-vdd1p2 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p2";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1300000>;
+					anatop-reg-offset = <0x220>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0x14>;
+					anatop-min-voltage = <1100000>;
+					anatop-max-voltage = <1300000>;
+					anatop-enable-bit = <0>;
+				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx7d-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+				};
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SNVS_CLK>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SNVS_CLK>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clks: clock-controller@30380000 {
+				compatible = "fsl,imx7d-ccm";
+				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>;
+				clock-names = "ckil", "osc";
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx7d-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx7d-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupt-controller;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <3>;
+				interrupt-parent = <&intc>;
+				#power-domain-cells = <1>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_mipi_phy: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <0>;
+						power-supply = <&reg_1p0d>;
+					};
+
+					pgc_pcie_phy: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <1>;
+						power-supply = <&reg_1p0d>;
+					};
+
+					pgc_hsic_phy: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <2>;
+						power-supply = <&reg_1p2>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30400000 0x400000>;
+			ranges;
+
+			adc1: adc@30610000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30610000 0x10000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			adc2: adc@30620000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30620000 0x10000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			ecspi4: spi@30630000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30630000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
+					<&clks IMX7D_ECSPI4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			ftm1: pwm@30640000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				reg = <0x30640000 0x10000>;
+				#pwm-cells = <3>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			ftm2: pwm@30650000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				reg = <0x30650000 0x10000>;
+				#pwm-cells = <3>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
+					 <&clks IMX7D_PWM1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
+					 <&clks IMX7D_PWM2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
+					 <&clks IMX7D_PWM3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
+					 <&clks IMX7D_PWM4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			csi: csi@30710000 {
+				compatible = "fsl,imx7-csi";
+				reg = <0x30710000 0x10000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
+					 <&clks IMX7D_CLK_DUMMY>;
+				clock-names = "axi", "mclk", "dcic";
+				status = "disabled";
+
+				port {
+					csi_from_csi_mux: endpoint {
+						remote-endpoint = <&csi_mux_to_csi>;
+					};
+				};
+			};
+
+			lcdif: lcdif@30730000 {
+				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				reg = <0x30730000 0x10000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+					<&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>;
+				clock-names = "pix", "axi";
+				status = "disabled";
+			};
+
+			mipi_csi: mipi-csi@30750000 {
+				compatible = "fsl,imx7-mipi-csi2";
+				reg = <0x30750000 0x10000>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
+					 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+				clock-names = "pclk", "wrap", "phy";
+				power-domains = <&pgc_mipi_phy>;
+				phy-supply = <&reg_1p0d>;
+				resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_vc0_to_csi_mux: endpoint {
+							remote-endpoint = <&csi_mux_from_mipi_vc0>;
+						};
+					};
+				};
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30800000 0x400000>;
+			ranges;
+
+			spba-bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30800000 0x100000>;
+				ranges;
+
+				ecspi1: spi@30820000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
+						<&clks IMX7D_ECSPI1_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: spi@30830000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
+						<&clks IMX7D_ECSPI2_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: spi@30840000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
+						<&clks IMX7D_ECSPI3_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@30860000 {
+					compatible = "fsl,imx7d-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+						<&clks IMX7D_UART1_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart2: serial@30890000 {
+					compatible = "fsl,imx7d-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+						<&clks IMX7D_UART2_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart3: serial@30880000 {
+					compatible = "fsl,imx7d-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+						<&clks IMX7D_UART3_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				sai1: sai@308a0000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+					reg = <0x308a0000 0x10000>;
+					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SAI1_IPG_CLK>,
+						 <&clks IMX7D_SAI1_ROOT_CLK>,
+						 <&clks IMX7D_CLK_DUMMY>,
+						 <&clks IMX7D_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
+					status = "disabled";
+				};
+
+				sai2: sai@308b0000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+					reg = <0x308b0000 0x10000>;
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SAI2_IPG_CLK>,
+						 <&clks IMX7D_SAI2_ROOT_CLK>,
+						 <&clks IMX7D_CLK_DUMMY>,
+						 <&clks IMX7D_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
+					status = "disabled";
+				};
+
+				sai3: sai@308c0000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+					reg = <0x308c0000 0x10000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SAI3_IPG_CLK>,
+						 <&clks IMX7D_SAI3_ROOT_CLK>,
+						 <&clks IMX7D_CLK_DUMMY>,
+						 <&clks IMX7D_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
+					status = "disabled";
+				};
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CAAM_CLK>,
+					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+				clock-names = "ipg", "aclk";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			flexcan1: can@30a00000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a00000 0x10000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 1>;
+				status = "disabled";
+			};
+
+			flexcan2: can@30a10000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a10000 0x10000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 2>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
+					<&clks IMX7D_UART4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@30a70000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a70000 0x10000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
+					<&clks IMX7D_UART5_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@30a80000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a80000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
+					<&clks IMX7D_UART6_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart7: serial@30a90000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
+					<&clks IMX7D_UART7_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			mu0a: mailbox@30aa0000 {
+				compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_MU_ROOT_CLK>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu0b: mailbox@30ab0000 {
+				compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+				reg = <0x30ab0000 0x10000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_MU_ROOT_CLK>;
+				#mbox-cells = <2>;
+				fsl,mu-side-b;
+				status = "disabled";
+			};
+
+			usbotg1: usb@30b10000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b10000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbh: usb@30b30000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b30000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop3>;
+				fsl,usbmisc = <&usbmisc3 0>;
+				phy_type = "hsic";
+				dr_mode = "host";
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@30b10200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b10200 0x200>;
+			};
+
+			usbmisc3: usbmisc@30b30200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b30200 0x200>;
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
+					<&clks IMX7D_USDHC1_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
+					<&clks IMX7D_USDHC2_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
+					<&clks IMX7D_USDHC3_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			qspi: spi@30bb0000 {
+				compatible = "fsl,imx7d-qspi";
+				reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_QSPI_ROOT_CLK>,
+					<&clks IMX7D_QSPI_ROOT_CLK>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@30bd0000 {
+				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					 <&clks IMX7D_SDMA_CORE_CLK>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupt-names = "int0", "int1", "int2", "pps";
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ENET1_IPG_ROOT_CLK>,
+					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "ptp",
+					"enet_clk_ref", "enet_out";
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				fsl,stop-mode = <&gpr 0x10 3>;
+				status = "disabled";
+			};
+		};
+
+		dma_apbh: dma-controller@33000000 {
+			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x33000000 0x2000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
+		};
+
+		gpmi: nand-controller@33002000{
+			compatible = "fsl,imx7d-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
+				<&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
+			clock-names = "gpmi_io", "gpmi_bch_apb";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+			assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
+			assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp-com.dts b/arch/arm/boot/dts/nxp/imx/imx7ulp-com.dts
new file mode 100644
index 0000000000000..d76fea3b35c68
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp-com.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2019 NXP
+
+/dts-v1/;
+
+#include "imx7ulp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Embedded Artists i.MX7ULP COM";
+	compatible = "ea,imx7ulp-com", "fsl,imx7ulp";
+
+	chosen {
+		stdout-path = &lpuart4;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x4000000>;
+	};
+};
+
+&lpuart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_id>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usdhc0 {
+	assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>;
+	assigned-clock-parents = <&scg1 IMX7ULP_CLK_APLL_PFD1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc1 {
+	pinctrl_lpuart4: lpuart4grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC3__LPUART4_RX	0x3
+			IMX7ULP_PAD_PTC2__LPUART4_TX	0x3
+		>;
+	};
+
+	pinctrl_usbotg1_id: otg1idgrp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC13__USB0_ID	0x10003
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTD1__SDHC0_CMD	0x43
+			IMX7ULP_PAD_PTD2__SDHC0_CLK	0x10042
+			IMX7ULP_PAD_PTD3__SDHC0_D7	0x43
+			IMX7ULP_PAD_PTD4__SDHC0_D6	0x43
+			IMX7ULP_PAD_PTD5__SDHC0_D5	0x43
+			IMX7ULP_PAD_PTD6__SDHC0_D4	0x43
+			IMX7ULP_PAD_PTD7__SDHC0_D3	0x43
+			IMX7ULP_PAD_PTD8__SDHC0_D2	0x43
+			IMX7ULP_PAD_PTD9__SDHC0_D1	0x43
+			IMX7ULP_PAD_PTD10__SDHC0_D0	0x43
+			IMX7ULP_PAD_PTD11__SDHC0_DQS	0x42
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts
new file mode 100644
index 0000000000000..eff51e113db4f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ *   Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+/dts-v1/;
+
+#include "imx7ulp.dtsi"
+
+/ {
+	model = "NXP i.MX7ULP EVK";
+	compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp";
+
+	chosen {
+		stdout-path = &lpuart4;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm4 1 50000 0>;
+		brightness-levels = <0 20 25 30 35 40 100>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio_ptc 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc0_rst>;
+		gpio = <&gpio_ptd 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&lpuart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart4>;
+	status = "okay";
+};
+
+&tpm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_id>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc0 {
+	assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>;
+	assigned-clock-parents = <&scg1 IMX7ULP_CLK_APLL_PFD1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	cd-gpios = <&gpio_ptc 10 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	status = "okay";
+};
+
+&iomuxc1 {
+	pinctrl_lpuart4: lpuart4grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC3__LPUART4_RX	0x3
+			IMX7ULP_PAD_PTC2__LPUART4_TX	0x3
+		>;
+		bias-pull-up;
+	};
+
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTF2__TPM4_CH1	0x2
+		>;
+	};
+
+	pinctrl_usbotg1_vbus: otg1vbusgrp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC0__PTC0		0x20000
+		>;
+	};
+
+	pinctrl_usbotg1_id: otg1idgrp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC13__USB0_ID	0x10003
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTD1__SDHC0_CMD	0x43
+			IMX7ULP_PAD_PTD2__SDHC0_CLK	0x40
+			IMX7ULP_PAD_PTD7__SDHC0_D3	0x43
+			IMX7ULP_PAD_PTD8__SDHC0_D2	0x43
+			IMX7ULP_PAD_PTD9__SDHC0_D1	0x43
+			IMX7ULP_PAD_PTD10__SDHC0_D0	0x43
+			IMX7ULP_PAD_PTC10__PTC10	0x3	/* CD */
+		>;
+	};
+
+	pinctrl_usdhc0_rst: usdhc0-gpio-rst-grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTD0__PTD0		0x3
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx7ulp-pinfunc.h
new file mode 100644
index 0000000000000..c0148d79b62da
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp-pinfunc.h
@@ -0,0 +1,478 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef __DTS_IMX7ULP_PINFUNC_H
+#define __DTS_IMX7ULP_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_conf_reg input_reg mux_mode input_val>
+ */
+
+#define IMX7ULP_PAD_PTC0__PTC0                                       0x0000 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC0__TRACE_D15                                  0x0000 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC0__LPUART4_CTS_B                              0x0000 0x0244 0x4 0x1
+#define IMX7ULP_PAD_PTC0__LPI2C4_SCL                                 0x0000 0x0278 0x5 0x1
+#define IMX7ULP_PAD_PTC0__TPM4_CLKIN                                 0x0000 0x0298 0x6 0x1
+#define IMX7ULP_PAD_PTC0__FB_AD0                                     0x0000 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC1__PTC1                                       0x0004 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC1__TRACE_D14                                  0x0004 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC1__LPUART4_RTS_B                              0x0004 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTC1__LPI2C4_SDA                                 0x0004 0x027c 0x5 0x1
+#define IMX7ULP_PAD_PTC1__TPM4_CH0                                   0x0004 0x0280 0x6 0x1
+#define IMX7ULP_PAD_PTC1__FB_AD1                                     0x0004 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC2__PTC2                                       0x0008 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC2__TRACE_D13                                  0x0008 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC2__LPUART4_TX                                 0x0008 0x024c 0x4 0x1
+#define IMX7ULP_PAD_PTC2__LPI2C4_HREQ                                0x0008 0x0274 0x5 0x1
+#define IMX7ULP_PAD_PTC2__TPM4_CH1                                   0x0008 0x0284 0x6 0x1
+#define IMX7ULP_PAD_PTC2__FB_AD2                                     0x0008 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC3__PTC3                                       0x000c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC3__TRACE_D12                                  0x000c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC3__LPUART4_RX                                 0x000c 0x0248 0x4 0x1
+#define IMX7ULP_PAD_PTC3__TPM4_CH2                                   0x000c 0x0288 0x6 0x1
+#define IMX7ULP_PAD_PTC3__FB_AD3                                     0x000c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC4__PTC4                                       0x0010 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC4__TRACE_D11                                  0x0010 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC4__FXIO1_D0                                   0x0010 0x0204 0x2 0x1
+#define IMX7ULP_PAD_PTC4__LPSPI2_PCS1                                0x0010 0x02a0 0x3 0x1
+#define IMX7ULP_PAD_PTC4__LPUART5_CTS_B                              0x0010 0x0250 0x4 0x1
+#define IMX7ULP_PAD_PTC4__LPI2C5_SCL                                 0x0010 0x02bc 0x5 0x1
+#define IMX7ULP_PAD_PTC4__TPM4_CH3                                   0x0010 0x028c 0x6 0x1
+#define IMX7ULP_PAD_PTC4__FB_AD4                                     0x0010 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC5__PTC5                                       0x0014 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC5__TRACE_D10                                  0x0014 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC5__FXIO1_D1                                   0x0014 0x0208 0x2 0x1
+#define IMX7ULP_PAD_PTC5__LPSPI2_PCS2                                0x0014 0x02a4 0x3 0x1
+#define IMX7ULP_PAD_PTC5__LPUART5_RTS_B                              0x0014 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTC5__LPI2C5_SDA                                 0x0014 0x02c0 0x5 0x1
+#define IMX7ULP_PAD_PTC5__TPM4_CH4                                   0x0014 0x0290 0x6 0x1
+#define IMX7ULP_PAD_PTC5__FB_AD5                                     0x0014 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC6__PTC6                                       0x0018 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC6__TRACE_D9                                   0x0018 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC6__FXIO1_D2                                   0x0018 0x020c 0x2 0x1
+#define IMX7ULP_PAD_PTC6__LPSPI2_PCS3                                0x0018 0x02a8 0x3 0x1
+#define IMX7ULP_PAD_PTC6__LPUART5_TX                                 0x0018 0x0258 0x4 0x1
+#define IMX7ULP_PAD_PTC6__LPI2C5_HREQ                                0x0018 0x02b8 0x5 0x1
+#define IMX7ULP_PAD_PTC6__TPM4_CH5                                   0x0018 0x0294 0x6 0x1
+#define IMX7ULP_PAD_PTC6__FB_AD6                                     0x0018 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC7__PTC7                                       0x001c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC7__TRACE_D8                                   0x001c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC7__FXIO1_D3                                   0x001c 0x0210 0x2 0x1
+#define IMX7ULP_PAD_PTC7__LPUART5_RX                                 0x001c 0x0254 0x4 0x1
+#define IMX7ULP_PAD_PTC7__TPM5_CH1                                   0x001c 0x02c8 0x6 0x1
+#define IMX7ULP_PAD_PTC7__FB_AD7                                     0x001c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC8__PTC8                                       0x0020 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC8__TRACE_D7                                   0x0020 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC8__FXIO1_D4                                   0x0020 0x0214 0x2 0x1
+#define IMX7ULP_PAD_PTC8__LPSPI2_SIN                                 0x0020 0x02b0 0x3 0x1
+#define IMX7ULP_PAD_PTC8__LPUART6_CTS_B                              0x0020 0x025c 0x4 0x1
+#define IMX7ULP_PAD_PTC8__LPI2C6_SCL                                 0x0020 0x02fc 0x5 0x1
+#define IMX7ULP_PAD_PTC8__TPM5_CLKIN                                 0x0020 0x02cc 0x6 0x1
+#define IMX7ULP_PAD_PTC8__FB_AD8                                     0x0020 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC9__PTC9                                       0x0024 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC9__TRACE_D6                                   0x0024 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC9__FXIO1_D5                                   0x0024 0x0218 0x2 0x1
+#define IMX7ULP_PAD_PTC9__LPSPI2_SOUT                                0x0024 0x02b4 0x3 0x1
+#define IMX7ULP_PAD_PTC9__LPUART6_RTS_B                              0x0024 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTC9__LPI2C6_SDA                                 0x0024 0x0300 0x5 0x1
+#define IMX7ULP_PAD_PTC9__TPM5_CH0                                   0x0024 0x02c4 0x6 0x1
+#define IMX7ULP_PAD_PTC9__FB_AD9                                     0x0024 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC10__PTC10                                     0x0028 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC10__TRACE_D5                                  0x0028 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC10__FXIO1_D6                                  0x0028 0x021c 0x2 0x1
+#define IMX7ULP_PAD_PTC10__LPSPI2_SCK                                0x0028 0x02ac 0x3 0x1
+#define IMX7ULP_PAD_PTC10__LPUART6_TX                                0x0028 0x0264 0x4 0x1
+#define IMX7ULP_PAD_PTC10__LPI2C6_HREQ                               0x0028 0x02f8 0x5 0x1
+#define IMX7ULP_PAD_PTC10__TPM7_CH3                                  0x0028 0x02e8 0x6 0x1
+#define IMX7ULP_PAD_PTC10__FB_AD10                                   0x0028 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC11__PTC11                                     0x002c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC11__TRACE_D4                                  0x002c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC11__FXIO1_D7                                  0x002c 0x0220 0x2 0x1
+#define IMX7ULP_PAD_PTC11__LPSPI2_PCS0                               0x002c 0x029c 0x3 0x1
+#define IMX7ULP_PAD_PTC11__LPUART6_RX                                0x002c 0x0260 0x4 0x1
+#define IMX7ULP_PAD_PTC11__TPM7_CH4                                  0x002c 0x02ec 0x6 0x1
+#define IMX7ULP_PAD_PTC11__FB_AD11                                   0x002c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC12__PTC12                                     0x0030 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC12__TRACE_D3                                  0x0030 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC12__FXIO1_D8                                  0x0030 0x0224 0x2 0x1
+#define IMX7ULP_PAD_PTC12__LPSPI3_PCS1                               0x0030 0x0314 0x3 0x1
+#define IMX7ULP_PAD_PTC12__LPUART7_CTS_B                             0x0030 0x0268 0x4 0x1
+#define IMX7ULP_PAD_PTC12__LPI2C7_SCL                                0x0030 0x0308 0x5 0x1
+#define IMX7ULP_PAD_PTC12__TPM7_CH5                                  0x0030 0x02f0 0x6 0x1
+#define IMX7ULP_PAD_PTC12__FB_AD12                                   0x0030 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC13__PTC13                                     0x0034 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC13__TRACE_D2                                  0x0034 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC13__FXIO1_D9                                  0x0034 0x0228 0x2 0x1
+#define IMX7ULP_PAD_PTC13__LPSPI3_PCS2                               0x0034 0x0318 0x3 0x1
+#define IMX7ULP_PAD_PTC13__LPUART7_RTS_B                             0x0034 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTC13__LPI2C7_SDA                                0x0034 0x030c 0x5 0x1
+#define IMX7ULP_PAD_PTC13__TPM7_CLKIN                                0x0034 0x02f4 0x6 0x1
+#define IMX7ULP_PAD_PTC13__FB_AD13                                   0x0034 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC13__USB0_ID                                   0x0034 0x0338 0xb 0x1
+#define IMX7ULP_PAD_PTC14__PTC14                                     0x0038 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC14__TRACE_D1                                  0x0038 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC14__FXIO1_D10                                 0x0038 0x022c 0x2 0x1
+#define IMX7ULP_PAD_PTC14__LPSPI3_PCS3                               0x0038 0x031c 0x3 0x1
+#define IMX7ULP_PAD_PTC14__LPUART7_TX                                0x0038 0x0270 0x4 0x1
+#define IMX7ULP_PAD_PTC14__LPI2C7_HREQ                               0x0038 0x0304 0x5 0x1
+#define IMX7ULP_PAD_PTC14__TPM7_CH0                                  0x0038 0x02dc 0x6 0x1
+#define IMX7ULP_PAD_PTC14__FB_AD14                                   0x0038 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC15__PTC15                                     0x003c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC15__TRACE_D0                                  0x003c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC15__FXIO1_D11                                 0x003c 0x0230 0x2 0x1
+#define IMX7ULP_PAD_PTC15__LPUART7_RX                                0x003c 0x026c 0x4 0x1
+#define IMX7ULP_PAD_PTC15__TPM7_CH1                                  0x003c 0x02e0 0x6 0x1
+#define IMX7ULP_PAD_PTC15__FB_AD15                                   0x003c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC16__PTC16                                     0x0040 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC16__TRACE_CLKOUT                              0x0040 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC16__FXIO1_D12                                 0x0040 0x0234 0x2 0x1
+#define IMX7ULP_PAD_PTC16__LPSPI3_SIN                                0x0040 0x0324 0x3 0x1
+#define IMX7ULP_PAD_PTC16__TPM7_CH2                                  0x0040 0x02e4 0x6 0x1
+#define IMX7ULP_PAD_PTC16__FB_ALE_FB_CS1_B_FB_TS_B                   0x0040 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC16__USB1_OC2                                  0x0040 0x0334 0xb 0x1
+#define IMX7ULP_PAD_PTC17__PTC17                                     0x0044 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC17__FXIO1_D13                                 0x0044 0x0238 0x2 0x1
+#define IMX7ULP_PAD_PTC17__LPSPI3_SOUT                               0x0044 0x0328 0x3 0x1
+#define IMX7ULP_PAD_PTC17__TPM6_CLKIN                                0x0044 0x02d8 0x6 0x1
+#define IMX7ULP_PAD_PTC17__FB_CS0_B                                  0x0044 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC18__PTC18                                     0x0048 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC18__FXIO1_D14                                 0x0048 0x023c 0x2 0x1
+#define IMX7ULP_PAD_PTC18__LPSPI3_SCK                                0x0048 0x0320 0x3 0x1
+#define IMX7ULP_PAD_PTC18__TPM6_CH0                                  0x0048 0x02d0 0x6 0x1
+#define IMX7ULP_PAD_PTC18__FB_OE_B                                   0x0048 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC18__USB0_ID                                   0x0048 0x0338 0xb 0x2
+#define IMX7ULP_PAD_PTC18__VIU_DE                                    0x0048 0x033c 0xc 0x1
+#define IMX7ULP_PAD_PTC19__PTC19                                     0x004c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC19__FXIO1_D15                                 0x004c 0x0240 0x2 0x1
+#define IMX7ULP_PAD_PTC19__LPSPI3_PCS0                               0x004c 0x0310 0x3 0x1
+#define IMX7ULP_PAD_PTC19__TPM6_CH1                                  0x004c 0x02d4 0x6 0x1
+#define IMX7ULP_PAD_PTC19__FB_A16                                    0x004c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC19__USB0_ID                                   0x004c 0x0338 0xa 0x3
+#define IMX7ULP_PAD_PTC19__USB1_PWR2                                 0x004c 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTC19__VIU_DE                                    0x004c 0x033c 0xc 0x3
+#define IMX7ULP_PAD_PTD0__PTD0                                       0x0080 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD0__SDHC0_RESET_B                              0x0080 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD1__PTD1                                       0x0084 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD1__SDHC0_CMD                                  0x0084 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD2__PTD2                                       0x0088 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD2__SDHC0_CLK                                  0x0088 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD3__PTD3                                       0x008c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD3__SDHC0_D7                                   0x008c 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD4__PTD4                                       0x0090 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD4__SDHC0_D6                                   0x0090 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD5__PTD5                                       0x0094 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD5__SDHC0_D5                                   0x0094 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD6__PTD6                                       0x0098 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD6__SDHC0_D4                                   0x0098 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD7__PTD7                                       0x009c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD7__SDHC0_D3                                   0x009c 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD8__PTD8                                       0x00a0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD8__TPM4_CLKIN                                 0x00a0 0x0298 0x6 0x2
+#define IMX7ULP_PAD_PTD8__SDHC0_D2                                   0x00a0 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD9__PTD9                                       0x00a4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD9__TPM4_CH0                                   0x00a4 0x0280 0x6 0x2
+#define IMX7ULP_PAD_PTD9__SDHC0_D1                                   0x00a4 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD10__PTD10                                     0x00a8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD10__TPM4_CH1                                  0x00a8 0x0284 0x6 0x2
+#define IMX7ULP_PAD_PTD10__SDHC0_D0                                  0x00a8 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD11__PTD11                                     0x00ac 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD11__TPM4_CH2                                  0x00ac 0x0288 0x6 0x2
+#define IMX7ULP_PAD_PTD11__SDHC0_DQS                                 0x00ac 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE0__PTE0                                       0x0100 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE0__FXIO1_D31                                  0x0100 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE0__LPSPI2_PCS1                                0x0100 0x02a0 0x3 0x2
+#define IMX7ULP_PAD_PTE0__LPUART4_CTS_B                              0x0100 0x0244 0x4 0x2
+#define IMX7ULP_PAD_PTE0__LPI2C4_SCL                                 0x0100 0x0278 0x5 0x2
+#define IMX7ULP_PAD_PTE0__SDHC1_D1                                   0x0100 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE0__FB_A25                                     0x0100 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE1__PTE1                                       0x0104 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE1__FXIO1_D30                                  0x0104 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE1__LPSPI2_PCS2                                0x0104 0x02a4 0x3 0x2
+#define IMX7ULP_PAD_PTE1__LPUART4_RTS_B                              0x0104 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTE1__LPI2C4_SDA                                 0x0104 0x027c 0x5 0x2
+#define IMX7ULP_PAD_PTE1__SDHC1_D0                                   0x0104 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE1__FB_A26                                     0x0104 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE2__PTE2                                       0x0108 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE2__FXIO1_D29                                  0x0108 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE2__LPSPI2_PCS3                                0x0108 0x02a8 0x3 0x2
+#define IMX7ULP_PAD_PTE2__LPUART4_TX                                 0x0108 0x024c 0x4 0x2
+#define IMX7ULP_PAD_PTE2__LPI2C4_HREQ                                0x0108 0x0274 0x5 0x2
+#define IMX7ULP_PAD_PTE2__SDHC1_CLK                                  0x0108 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE3__PTE3                                       0x010c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE3__FXIO1_D28                                  0x010c 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE3__LPUART4_RX                                 0x010c 0x0248 0x4 0x2
+#define IMX7ULP_PAD_PTE3__TPM5_CH1                                   0x010c 0x02c8 0x6 0x2
+#define IMX7ULP_PAD_PTE3__SDHC1_CMD                                  0x010c 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE4__PTE4                                       0x0110 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE4__FXIO1_D27                                  0x0110 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE4__LPSPI2_SIN                                 0x0110 0x02b0 0x3 0x2
+#define IMX7ULP_PAD_PTE4__LPUART5_CTS_B                              0x0110 0x0250 0x4 0x2
+#define IMX7ULP_PAD_PTE4__LPI2C5_SCL                                 0x0110 0x02bc 0x5 0x2
+#define IMX7ULP_PAD_PTE4__TPM5_CLKIN                                 0x0110 0x02cc 0x6 0x2
+#define IMX7ULP_PAD_PTE4__SDHC1_D3                                   0x0110 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE5__PTE5                                       0x0114 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE5__FXIO1_D26                                  0x0114 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE5__LPSPI2_SOUT                                0x0114 0x02b4 0x3 0x2
+#define IMX7ULP_PAD_PTE5__LPUART5_RTS_B                              0x0114 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTE5__LPI2C5_SDA                                 0x0114 0x02c0 0x5 0x2
+#define IMX7ULP_PAD_PTE5__TPM5_CH0                                   0x0114 0x02c4 0x6 0x2
+#define IMX7ULP_PAD_PTE5__SDHC1_D2                                   0x0114 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE5__VIU_DE                                     0x0114 0x033c 0xc 0x2
+#define IMX7ULP_PAD_PTE6__PTE6                                       0x0118 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE6__FXIO1_D25                                  0x0118 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE6__LPSPI2_SCK                                 0x0118 0x02ac 0x3 0x2
+#define IMX7ULP_PAD_PTE6__LPUART5_TX                                 0x0118 0x0258 0x4 0x2
+#define IMX7ULP_PAD_PTE6__LPI2C5_HREQ                                0x0118 0x02b8 0x5 0x2
+#define IMX7ULP_PAD_PTE6__TPM7_CH3                                   0x0118 0x02e8 0x6 0x2
+#define IMX7ULP_PAD_PTE6__SDHC1_D4                                   0x0118 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE6__FB_A17                                     0x0118 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE6__USB0_OC                                    0x0118 0x0330 0xb 0x1
+#define IMX7ULP_PAD_PTE7__PTE7                                       0x011c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE7__TRACE_D7                                   0x011c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE7__USB0_PWR                                   0x011c 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTE7__VIU_FID                                    0x011c 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE7__FXIO1_D24                                  0x011c 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE7__LPSPI2_PCS0                                0x011c 0x029c 0x3 0x2
+#define IMX7ULP_PAD_PTE7__LPUART5_RX                                 0x011c 0x0254 0x4 0x2
+#define IMX7ULP_PAD_PTE7__TPM7_CH4                                   0x011c 0x02ec 0x6 0x2
+#define IMX7ULP_PAD_PTE7__SDHC1_D5                                   0x011c 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE7__FB_A18                                     0x011c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE8__PTE8                                       0x0120 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE8__TRACE_D6                                   0x0120 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE8__VIU_D16                                    0x0120 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE8__FXIO1_D23                                  0x0120 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE8__LPSPI3_PCS1                                0x0120 0x0314 0x3 0x2
+#define IMX7ULP_PAD_PTE8__LPUART6_CTS_B                              0x0120 0x025c 0x4 0x2
+#define IMX7ULP_PAD_PTE8__LPI2C6_SCL                                 0x0120 0x02fc 0x5 0x2
+#define IMX7ULP_PAD_PTE8__TPM7_CH5                                   0x0120 0x02f0 0x6 0x2
+#define IMX7ULP_PAD_PTE8__SDHC1_WP                                   0x0120 0x0200 0x7 0x1
+#define IMX7ULP_PAD_PTE8__SDHC1_D6                                   0x0120 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE8__FB_CS3_B_FB_BE7_0_BLS31_24_B               0x0120 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE9__PTE9                                       0x0124 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE9__TRACE_D5                                   0x0124 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE9__VIU_D17                                    0x0124 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE9__FXIO1_D22                                  0x0124 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE9__LPSPI3_PCS2                                0x0124 0x0318 0x3 0x2
+#define IMX7ULP_PAD_PTE9__LPUART6_RTS_B                              0x0124 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTE9__LPI2C6_SDA                                 0x0124 0x0300 0x5 0x2
+#define IMX7ULP_PAD_PTE9__TPM7_CLKIN                                 0x0124 0x02f4 0x6 0x2
+#define IMX7ULP_PAD_PTE9__SDHC1_CD                                   0x0124 0x032c 0x7 0x1
+#define IMX7ULP_PAD_PTE9__SDHC1_D7                                   0x0124 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE9__FB_TBST_B_FB_CS2_B_FB_BE15_8_BLS23_16_B    0x0124 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE10__PTE10                                     0x0128 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE10__TRACE_D4                                  0x0128 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE10__VIU_D18                                   0x0128 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE10__FXIO1_D21                                 0x0128 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE10__LPSPI3_PCS3                               0x0128 0x031c 0x3 0x2
+#define IMX7ULP_PAD_PTE10__LPUART6_TX                                0x0128 0x0264 0x4 0x2
+#define IMX7ULP_PAD_PTE10__LPI2C6_HREQ                               0x0128 0x02f8 0x5 0x2
+#define IMX7ULP_PAD_PTE10__TPM7_CH0                                  0x0128 0x02dc 0x6 0x2
+#define IMX7ULP_PAD_PTE10__SDHC1_VS                                  0x0128 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTE10__SDHC1_DQS                                 0x0128 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE10__FB_A19                                    0x0128 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE11__PTE11                                     0x012c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE11__TRACE_D3                                  0x012c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE11__VIU_D19                                   0x012c 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE11__FXIO1_D20                                 0x012c 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE11__LPUART6_RX                                0x012c 0x0260 0x4 0x2
+#define IMX7ULP_PAD_PTE11__TPM7_CH1                                  0x012c 0x02e0 0x6 0x2
+#define IMX7ULP_PAD_PTE11__SDHC1_RESET_B                             0x012c 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE11__FB_A20                                    0x012c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE12__PTE12                                     0x0130 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE12__TRACE_D2                                  0x0130 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE12__USB1_OC2                                  0x0130 0x0334 0xb 0x2
+#define IMX7ULP_PAD_PTE12__VIU_D20                                   0x0130 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE12__FXIO1_D19                                 0x0130 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE12__LPSPI3_SIN                                0x0130 0x0324 0x3 0x2
+#define IMX7ULP_PAD_PTE12__LPUART7_CTS_B                             0x0130 0x0268 0x4 0x2
+#define IMX7ULP_PAD_PTE12__LPI2C7_SCL                                0x0130 0x0308 0x5 0x2
+#define IMX7ULP_PAD_PTE12__TPM7_CH2                                  0x0130 0x02e4 0x6 0x2
+#define IMX7ULP_PAD_PTE12__SDHC1_WP                                  0x0130 0x0200 0x8 0x2
+#define IMX7ULP_PAD_PTE12__FB_A21                                    0x0130 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE13__PTE13                                     0x0134 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE13__TRACE_D1                                  0x0134 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE13__USB1_PWR2                                 0x0134 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTE13__VIU_D21                                   0x0134 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE13__FXIO1_D18                                 0x0134 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE13__LPSPI3_SOUT                               0x0134 0x0328 0x3 0x2
+#define IMX7ULP_PAD_PTE13__LPUART7_RTS_B                             0x0134 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTE13__LPI2C7_SDA                                0x0134 0x030c 0x5 0x2
+#define IMX7ULP_PAD_PTE13__TPM6_CLKIN                                0x0134 0x02d8 0x6 0x2
+#define IMX7ULP_PAD_PTE13__SDHC1_CD                                  0x0134 0x032c 0x8 0x2
+#define IMX7ULP_PAD_PTE13__FB_A22                                    0x0134 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE14__PTE14                                     0x0138 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE14__TRACE_D0                                  0x0138 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE14__USB0_OC                                   0x0138 0x0330 0xb 0x2
+#define IMX7ULP_PAD_PTE14__VIU_D22                                   0x0138 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE14__FXIO1_D17                                 0x0138 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE14__LPSPI3_SCK                                0x0138 0x0320 0x3 0x2
+#define IMX7ULP_PAD_PTE14__LPUART7_TX                                0x0138 0x0270 0x4 0x2
+#define IMX7ULP_PAD_PTE14__LPI2C7_HREQ                               0x0138 0x0304 0x5 0x2
+#define IMX7ULP_PAD_PTE14__TPM6_CH0                                  0x0138 0x02d0 0x6 0x2
+#define IMX7ULP_PAD_PTE14__SDHC1_VS                                  0x0138 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE14__FB_A23                                    0x0138 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE15__PTE15                                     0x013c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE15__TRACE_CLKOUT                              0x013c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE15__USB0_PWR                                  0x013c 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTE15__VIU_D23                                   0x013c 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE15__FXIO1_D16                                 0x013c 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE15__LPSPI3_PCS0                               0x013c 0x0310 0x3 0x2
+#define IMX7ULP_PAD_PTE15__LPUART7_RX                                0x013c 0x026c 0x4 0x2
+#define IMX7ULP_PAD_PTE15__TPM6_CH1                                  0x013c 0x02d4 0x6 0x2
+#define IMX7ULP_PAD_PTE15__FB_A24                                    0x013c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF0__PTF0                                       0x0180 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF0__VIU_DE                                     0x0180 0x033c 0xc 0x0
+#define IMX7ULP_PAD_PTF0__LPUART4_CTS_B                              0x0180 0x0244 0x4 0x3
+#define IMX7ULP_PAD_PTF0__LPI2C4_SCL                                 0x0180 0x0278 0x5 0x3
+#define IMX7ULP_PAD_PTF0__TPM4_CLKIN                                 0x0180 0x0298 0x6 0x3
+#define IMX7ULP_PAD_PTF0__FB_RW_B                                    0x0180 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF1__PTF1                                       0x0184 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF1__VIU_HSYNC                                  0x0184 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF1__LPUART4_RTS_B                              0x0184 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTF1__LPI2C4_SDA                                 0x0184 0x027c 0x5 0x3
+#define IMX7ULP_PAD_PTF1__TPM4_CH0                                   0x0184 0x0280 0x6 0x3
+#define IMX7ULP_PAD_PTF1__CLKOUT                                     0x0184 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF2__PTF2                                       0x0188 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF2__VIU_VSYNC                                  0x0188 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF2__LPUART4_TX                                 0x0188 0x024c 0x4 0x3
+#define IMX7ULP_PAD_PTF2__LPI2C4_HREQ                                0x0188 0x0274 0x5 0x3
+#define IMX7ULP_PAD_PTF2__TPM4_CH1                                   0x0188 0x0284 0x6 0x3
+#define IMX7ULP_PAD_PTF2__FB_TSIZ1_FB_CS5_B_FB_BE23_16_BLS15_8_B     0x0188 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF3__PTF3                                       0x018c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF3__VIU_PCLK                                   0x018c 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF3__LPUART4_RX                                 0x018c 0x0248 0x4 0x3
+#define IMX7ULP_PAD_PTF3__TPM4_CH2                                   0x018c 0x0288 0x6 0x3
+#define IMX7ULP_PAD_PTF3__FB_AD16                                    0x018c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF4__PTF4                                       0x0190 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF4__VIU_D0                                     0x0190 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF4__FXIO1_D0                                   0x0190 0x0204 0x2 0x2
+#define IMX7ULP_PAD_PTF4__LPSPI2_PCS1                                0x0190 0x02a0 0x3 0x3
+#define IMX7ULP_PAD_PTF4__LPUART5_CTS_B                              0x0190 0x0250 0x4 0x3
+#define IMX7ULP_PAD_PTF4__LPI2C5_SCL                                 0x0190 0x02bc 0x5 0x3
+#define IMX7ULP_PAD_PTF4__TPM4_CH3                                   0x0190 0x028c 0x6 0x2
+#define IMX7ULP_PAD_PTF4__FB_AD17                                    0x0190 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF5__PTF5                                       0x0194 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF5__VIU_D1                                     0x0194 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF5__FXIO1_D1                                   0x0194 0x0208 0x2 0x2
+#define IMX7ULP_PAD_PTF5__LPSPI2_PCS2                                0x0194 0x02a4 0x3 0x3
+#define IMX7ULP_PAD_PTF5__LPUART5_RTS_B                              0x0194 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTF5__LPI2C5_SDA                                 0x0194 0x02c0 0x5 0x3
+#define IMX7ULP_PAD_PTF5__TPM4_CH4                                   0x0194 0x0290 0x6 0x2
+#define IMX7ULP_PAD_PTF5__FB_AD18                                    0x0194 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF6__PTF6                                       0x0198 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF6__VIU_D2                                     0x0198 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF6__FXIO1_D2                                   0x0198 0x020c 0x2 0x2
+#define IMX7ULP_PAD_PTF6__LPSPI2_PCS3                                0x0198 0x02a8 0x3 0x3
+#define IMX7ULP_PAD_PTF6__LPUART5_TX                                 0x0198 0x0258 0x4 0x3
+#define IMX7ULP_PAD_PTF6__LPI2C5_HREQ                                0x0198 0x02b8 0x5 0x3
+#define IMX7ULP_PAD_PTF6__TPM4_CH5                                   0x0198 0x0294 0x6 0x2
+#define IMX7ULP_PAD_PTF6__FB_AD19                                    0x0198 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF7__PTF7                                       0x019c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF7__VIU_D3                                     0x019c 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF7__FXIO1_D3                                   0x019c 0x0210 0x2 0x2
+#define IMX7ULP_PAD_PTF7__LPUART5_RX                                 0x019c 0x0254 0x4 0x3
+#define IMX7ULP_PAD_PTF7__TPM5_CH1                                   0x019c 0x02c8 0x6 0x3
+#define IMX7ULP_PAD_PTF7__FB_AD20                                    0x019c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF8__PTF8                                       0x01a0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF8__USB1_ULPI_CLK                              0x01a0 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF8__VIU_D4                                     0x01a0 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF8__FXIO1_D4                                   0x01a0 0x0214 0x2 0x2
+#define IMX7ULP_PAD_PTF8__LPSPI2_SIN                                 0x01a0 0x02b0 0x3 0x3
+#define IMX7ULP_PAD_PTF8__LPUART6_CTS_B                              0x01a0 0x025c 0x4 0x3
+#define IMX7ULP_PAD_PTF8__LPI2C6_SCL                                 0x01a0 0x02fc 0x5 0x3
+#define IMX7ULP_PAD_PTF8__TPM5_CLKIN                                 0x01a0 0x02cc 0x6 0x3
+#define IMX7ULP_PAD_PTF8__FB_AD21                                    0x01a0 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF9__PTF9                                       0x01a4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF9__USB1_ULPI_NXT                              0x01a4 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF9__VIU_D5                                     0x01a4 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF9__FXIO1_D5                                   0x01a4 0x0218 0x2 0x2
+#define IMX7ULP_PAD_PTF9__LPSPI2_SOUT                                0x01a4 0x02b4 0x3 0x3
+#define IMX7ULP_PAD_PTF9__LPUART6_RTS_B                              0x01a4 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTF9__LPI2C6_SDA                                 0x01a4 0x0300 0x5 0x3
+#define IMX7ULP_PAD_PTF9__TPM5_CH0                                   0x01a4 0x02c4 0x6 0x3
+#define IMX7ULP_PAD_PTF9__FB_AD22                                    0x01a4 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF10__PTF10                                     0x01a8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF10__USB1_ULPI_STP                             0x01a8 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF10__VIU_D6                                    0x01a8 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF10__FXIO1_D6                                  0x01a8 0x021c 0x2 0x2
+#define IMX7ULP_PAD_PTF10__LPSPI2_SCK                                0x01a8 0x02ac 0x3 0x3
+#define IMX7ULP_PAD_PTF10__LPUART6_TX                                0x01a8 0x0264 0x4 0x3
+#define IMX7ULP_PAD_PTF10__LPI2C6_HREQ                               0x01a8 0x02f8 0x5 0x3
+#define IMX7ULP_PAD_PTF10__TPM7_CH3                                  0x01a8 0x02e8 0x6 0x3
+#define IMX7ULP_PAD_PTF10__FB_AD23                                   0x01a8 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF11__PTF11                                     0x01ac 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF11__USB1_ULPI_DIR                             0x01ac 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF11__VIU_D7                                    0x01ac 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF11__FXIO1_D7                                  0x01ac 0x0220 0x2 0x2
+#define IMX7ULP_PAD_PTF11__LPSPI2_PCS0                               0x01ac 0x029c 0x3 0x3
+#define IMX7ULP_PAD_PTF11__LPUART6_RX                                0x01ac 0x0260 0x4 0x3
+#define IMX7ULP_PAD_PTF11__TPM7_CH4                                  0x01ac 0x02ec 0x6 0x3
+#define IMX7ULP_PAD_PTF11__FB_CS4_B_FB_TSIZ0_FB_BE31_24_BLS7_0_B     0x01ac 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF12__PTF12                                     0x01b0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF12__USB1_ULPI_DATA0                           0x01b0 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF12__VIU_D8                                    0x01b0 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF12__FXIO1_D8                                  0x01b0 0x0224 0x2 0x2
+#define IMX7ULP_PAD_PTF12__LPSPI3_PCS1                               0x01b0 0x0314 0x3 0x3
+#define IMX7ULP_PAD_PTF12__LPUART7_CTS_B                             0x01b0 0x0268 0x4 0x3
+#define IMX7ULP_PAD_PTF12__LPI2C7_SCL                                0x01b0 0x0308 0x5 0x3
+#define IMX7ULP_PAD_PTF12__TPM7_CH5                                  0x01b0 0x02f0 0x6 0x3
+#define IMX7ULP_PAD_PTF12__FB_AD24                                   0x01b0 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF13__PTF13                                     0x01b4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF13__USB1_ULPI_DATA1                           0x01b4 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF13__VIU_D9                                    0x01b4 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF13__FXIO1_D9                                  0x01b4 0x0228 0x2 0x2
+#define IMX7ULP_PAD_PTF13__LPSPI3_PCS2                               0x01b4 0x0318 0x3 0x3
+#define IMX7ULP_PAD_PTF13__LPUART7_RTS_B                             0x01b4 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTF13__LPI2C7_SDA                                0x01b4 0x030c 0x5 0x3
+#define IMX7ULP_PAD_PTF13__TPM7_CLKIN                                0x01b4 0x02f4 0x6 0x3
+#define IMX7ULP_PAD_PTF13__FB_AD25                                   0x01b4 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF14__PTF14                                     0x01b8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF14__USB1_ULPI_DATA2                           0x01b8 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF14__VIU_D10                                   0x01b8 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF14__FXIO1_D10                                 0x01b8 0x022c 0x2 0x2
+#define IMX7ULP_PAD_PTF14__LPSPI3_PCS3                               0x01b8 0x031c 0x3 0x3
+#define IMX7ULP_PAD_PTF14__LPUART7_TX                                0x01b8 0x0270 0x4 0x3
+#define IMX7ULP_PAD_PTF14__LPI2C7_HREQ                               0x01b8 0x0304 0x5 0x3
+#define IMX7ULP_PAD_PTF14__TPM7_CH0                                  0x01b8 0x02dc 0x6 0x3
+#define IMX7ULP_PAD_PTF14__FB_AD26                                   0x01b8 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF15__PTF15                                     0x01bc 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF15__USB1_ULPI_DATA3                           0x01bc 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF15__VIU_D11                                   0x01bc 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF15__FXIO1_D11                                 0x01bc 0x0230 0x2 0x2
+#define IMX7ULP_PAD_PTF15__LPUART7_RX                                0x01bc 0x026c 0x4 0x3
+#define IMX7ULP_PAD_PTF15__TPM7_CH1                                  0x01bc 0x02e0 0x6 0x3
+#define IMX7ULP_PAD_PTF15__FB_AD27                                   0x01bc 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF16__PTF16                                     0x01c0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF16__USB1_ULPI_DATA4                           0x01c0 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF16__VIU_D12                                   0x01c0 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF16__FXIO1_D12                                 0x01c0 0x0234 0x2 0x2
+#define IMX7ULP_PAD_PTF16__LPSPI3_SIN                                0x01c0 0x0324 0x3 0x3
+#define IMX7ULP_PAD_PTF16__TPM7_CH2                                  0x01c0 0x02e4 0x6 0x3
+#define IMX7ULP_PAD_PTF16__FB_AD28                                   0x01c0 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF17__PTF17                                     0x01c4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF17__USB1_ULPI_DATA5                           0x01c4 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF17__VIU_D13                                   0x01c4 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF17__FXIO1_D13                                 0x01c4 0x0238 0x2 0x2
+#define IMX7ULP_PAD_PTF17__LPSPI3_SOUT                               0x01c4 0x0328 0x3 0x3
+#define IMX7ULP_PAD_PTF17__TPM6_CLKIN                                0x01c4 0x02d8 0x6 0x3
+#define IMX7ULP_PAD_PTF17__FB_AD29                                   0x01c4 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF18__PTF18                                     0x01c8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF18__USB1_ULPI_DATA6                           0x01c8 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF18__VIU_D14                                   0x01c8 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF18__FXIO1_D14                                 0x01c8 0x023c 0x2 0x2
+#define IMX7ULP_PAD_PTF18__LPSPI3_SCK                                0x01c8 0x0320 0x3 0x3
+#define IMX7ULP_PAD_PTF18__TPM6_CH0                                  0x01c8 0x02d0 0x6 0x3
+#define IMX7ULP_PAD_PTF18__FB_AD30                                   0x01c8 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF19__PTF19                                     0x01cc 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF19__USB1_ULPI_DATA7                           0x01cc 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF19__VIU_D15                                   0x01cc 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF19__FXIO1_D15                                 0x01cc 0x0240 0x2 0x2
+#define IMX7ULP_PAD_PTF19__LPSPI3_PCS0                               0x01cc 0x0310 0x3 0x3
+#define IMX7ULP_PAD_PTF19__TPM6_CH1                                  0x01cc 0x02d4 0x6 0x3
+#define IMX7ULP_PAD_PTF19__FB_AD31                                   0x01cc 0x0000 0x9 0x0
+
+#endif /* __DTS_IMX7ULP_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
new file mode 100644
index 0000000000000..b01ddda7bd9e2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ *   Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx7ulp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "imx7ulp-pinfunc.h"
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio_ptc;
+		gpio1 = &gpio_ptd;
+		gpio2 = &gpio_pte;
+		gpio3 = &gpio_ptf;
+		i2c0 = &lpi2c6;
+		i2c1 = &lpi2c7;
+		mmc0 = &usdhc0;
+		mmc1 = &usdhc1;
+		serial0 = &lpuart4;
+		serial1 = &lpuart5;
+		serial2 = &lpuart6;
+		serial3 = &lpuart7;
+		usbphy0 = &usbphy1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf00>;
+		};
+	};
+
+	intc: interrupt-controller@40021000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x40021000 0x1000>,
+		      <0x40022000 0x1000>;
+	};
+
+	rosc: clock-rosc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "rosc";
+		#clock-cells = <0>;
+	};
+
+	sosc: clock-sosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "sosc";
+		#clock-cells = <0>;
+	};
+
+	sirc: clock-sirc {
+		compatible = "fixed-clock";
+		clock-frequency = <16000000>;
+		clock-output-names = "sirc";
+		#clock-cells = <0>;
+	};
+
+	firc: clock-firc {
+		compatible = "fixed-clock";
+		clock-frequency = <48000000>;
+		clock-output-names = "firc";
+		#clock-cells = <0>;
+	};
+
+	upll: clock-upll {
+		compatible = "fixed-clock";
+		clock-frequency = <480000000>;
+		clock-output-names = "upll";
+		#clock-cells = <0>;
+	};
+
+	ahbbridge0: bus@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x40000000 0x800000>;
+		ranges;
+
+		edma1: dma-controller@40080000 {
+			#dma-cells = <2>;
+			compatible = "fsl,imx7ulp-edma";
+			reg = <0x40080000 0x2000>,
+				<0x40210000 0x1000>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dma", "dmamux0";
+			clocks = <&pcc2 IMX7ULP_CLK_DMA1>,
+				 <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
+		};
+
+		crypto: crypto@40240000 {
+			compatible = "fsl,sec-v4.0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40240000 0x10000>;
+			ranges = <0 0x40240000 0x10000>;
+			clocks = <&pcc2 IMX7ULP_CLK_CAAM>,
+				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
+			clock-names = "aclk", "ipg";
+
+			sec_jr0: jr@1000 {
+				compatible = "fsl,sec-v4.0-job-ring";
+				reg = <0x1000 0x1000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@2000 {
+				compatible = "fsl,sec-v4.0-job-ring";
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		lpuart4: serial@402d0000 {
+			compatible = "fsl,imx7ulp-lpuart";
+			reg = <0x402d0000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_LPUART4>;
+			clock-names = "ipg";
+			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART4>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
+			assigned-clock-rates = <24000000>;
+			status = "disabled";
+		};
+
+		lpuart5: serial@402e0000 {
+			compatible = "fsl,imx7ulp-lpuart";
+			reg = <0x402e0000 0x1000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_LPUART5>;
+			clock-names = "ipg";
+			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART5>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		tpm4: pwm@40250000 {
+			compatible = "fsl,imx7ulp-pwm";
+			reg = <0x40250000 0x1000>;
+			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
+			clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		tpm5: tpm@40260000 {
+			compatible = "fsl,imx7ulp-tpm";
+			reg = <0x40260000 0x1000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+				 <&pcc2 IMX7ULP_CLK_LPTPM5>;
+			clock-names = "ipg", "per";
+		};
+
+		usbotg1: usb@40330000 {
+			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb";
+			reg = <0x40330000 0x200>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_USB0>;
+			phys = <&usbphy1>;
+			fsl,usbmisc = <&usbmisc1 0>;
+			ahb-burst-config = <0x0>;
+			tx-burst-size-dword = <0x8>;
+			rx-burst-size-dword = <0x8>;
+			status = "disabled";
+		};
+
+		usbmisc1: usbmisc@40330200 {
+			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			#index-cells = <1>;
+			reg = <0x40330200 0x200>;
+		};
+
+		usbphy1: usb-phy@40350000 {
+			compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
+			reg = <0x40350000 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
+			#phy-cells = <0>;
+		};
+
+		usdhc0: mmc@40370000 {
+			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
+			reg = <0x40370000 0x10000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+				 <&pcc2 IMX7ULP_CLK_USDHC0>;
+			clock-names = "ipg", "ahb", "per";
+			bus-width = <4>;
+			fsl,tuning-start-tap = <20>;
+			fsl,tuning-step = <2>;
+			status = "disabled";
+		};
+
+		usdhc1: mmc@40380000 {
+			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
+			reg = <0x40380000 0x10000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+				 <&pcc2 IMX7ULP_CLK_USDHC1>;
+			clock-names = "ipg", "ahb", "per";
+			bus-width = <4>;
+			fsl,tuning-start-tap = <20>;
+			fsl,tuning-step = <2>;
+			status = "disabled";
+		};
+
+		scg1: clock-controller@403e0000 {
+			compatible = "fsl,imx7ulp-scg1";
+			reg = <0x403e0000 0x10000>;
+			clocks = <&rosc>, <&sosc>, <&sirc>,
+				 <&firc>, <&upll>;
+			clock-names = "rosc", "sosc", "sirc",
+				      "firc", "upll";
+			#clock-cells = <1>;
+		};
+
+		wdog1: watchdog@403d0000 {
+			compatible = "fsl,imx7ulp-wdt";
+			reg = <0x403d0000 0x10000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
+			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			timeout-sec = <40>;
+		};
+
+		pcc2: clock-controller@403f0000 {
+			compatible = "fsl,imx7ulp-pcc2";
+			reg = <0x403f0000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+				 <&scg1 IMX7ULP_CLK_DDR_DIV>,
+				 <&scg1 IMX7ULP_CLK_APLL_PFD2>,
+				 <&scg1 IMX7ULP_CLK_APLL_PFD1>,
+				 <&scg1 IMX7ULP_CLK_APLL_PFD0>,
+				 <&scg1 IMX7ULP_CLK_UPLL>,
+				 <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
+				 <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
+				 <&scg1 IMX7ULP_CLK_ROSC>,
+				 <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
+			clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
+				      "apll_pfd2", "apll_pfd1", "apll_pfd0",
+				      "upll", "sosc_bus_clk",
+				      "firc_bus_clk", "rosc", "spll_bus_clk";
+			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
+		};
+
+		smc1: clock-controller@40410000 {
+			compatible = "fsl,imx7ulp-smc1";
+			reg = <0x40410000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&scg1 IMX7ULP_CLK_CORE_DIV>,
+				 <&scg1 IMX7ULP_CLK_HSRUN_CORE_DIV>;
+			clock-names = "divcore", "hsrun_divcore";
+		};
+
+		pcc3: clock-controller@40b30000 {
+			compatible = "fsl,imx7ulp-pcc3";
+			reg = <0x40b30000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+				 <&scg1 IMX7ULP_CLK_DDR_DIV>,
+				 <&scg1 IMX7ULP_CLK_APLL_PFD2>,
+				 <&scg1 IMX7ULP_CLK_APLL_PFD1>,
+				 <&scg1 IMX7ULP_CLK_APLL_PFD0>,
+				 <&scg1 IMX7ULP_CLK_UPLL>,
+				 <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
+				 <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
+				 <&scg1 IMX7ULP_CLK_ROSC>,
+				 <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
+			clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
+				      "apll_pfd2", "apll_pfd1", "apll_pfd0",
+				      "upll", "sosc_bus_clk",
+				      "firc_bus_clk", "rosc", "spll_bus_clk";
+		};
+	};
+
+	ahbbridge1: bus@40800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x40800000 0x800000>;
+		ranges;
+
+		lpi2c6: i2c@40a40000 {
+			compatible = "fsl,imx7ulp-lpi2c";
+			reg = <0x40a40000 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>,
+				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
+			clock-names = "per", "ipg";
+			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		lpi2c7: i2c@40a50000 {
+			compatible = "fsl,imx7ulp-lpi2c";
+			reg = <0x40a50000 0x10000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>,
+				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
+			clock-names = "per", "ipg";
+			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		lpuart6: serial@40a60000 {
+			compatible = "fsl,imx7ulp-lpuart";
+			reg = <0x40a60000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc3 IMX7ULP_CLK_LPUART6>;
+			clock-names = "ipg";
+			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART6>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		lpuart7: serial@40a70000 {
+			compatible = "fsl,imx7ulp-lpuart";
+			reg = <0x40a70000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc3  IMX7ULP_CLK_LPUART7>;
+			clock-names = "ipg";
+			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART7>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		memory-controller@40ab0000 {
+			compatible = "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc";
+			reg = <0x40ab0000 0x1000>;
+			clocks = <&pcc3 IMX7ULP_CLK_MMDC>;
+		};
+
+		iomuxc1: pinctrl@40ac0000 {
+			compatible = "fsl,imx7ulp-iomuxc1";
+			reg = <0x40ac0000 0x1000>;
+		};
+
+		gpio_ptc: gpio@40ae0000 {
+			compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
+			reg = <0x40ae0000 0x1000 0x400f0000 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
+				 <&pcc3 IMX7ULP_CLK_PCTLC>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc1 0 0 20>;
+		};
+
+		gpio_ptd: gpio@40af0000 {
+			compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
+			reg = <0x40af0000 0x1000 0x400f0040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
+				 <&pcc3 IMX7ULP_CLK_PCTLD>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc1 0 32 12>;
+		};
+
+		gpio_pte: gpio@40b00000 {
+			compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
+			reg = <0x40b00000 0x1000 0x400f0080 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
+				 <&pcc3 IMX7ULP_CLK_PCTLE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc1 0 64 16>;
+		};
+
+		gpio_ptf: gpio@40b10000 {
+			compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
+			reg = <0x40b10000 0x1000 0x400f00c0 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
+				 <&pcc3 IMX7ULP_CLK_PCTLF>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc1 0 96 20>;
+		};
+	};
+
+	m4aips1: bus@41080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x41080000 0x80000>;
+		ranges;
+
+		sim: sim@410a3000 {
+			compatible = "fsl,imx7ulp-sim", "syscon";
+			reg = <0x410a3000 0x1000>;
+		};
+
+		ocotp: efuse@410a6000 {
+			compatible = "fsl,imx7ulp-ocotp", "syscon";
+			reg = <0x410a6000 0x4000>;
+			clocks = <&scg1 IMX7ULP_CLK_DUMMY>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imxrt1050-evk.dts b/arch/arm/boot/dts/nxp/imx/imxrt1050-evk.dts
new file mode 100644
index 0000000000000..6a9c10decf521
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imxrt1050-evk.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+/dts-v1/;
+#include "imxrt1050.dtsi"
+#include "imxrt1050-pinfunc.h"
+
+/ {
+	model = "NXP IMXRT1050-evk board";
+	compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		mmc0 = &usdhc1;
+		serial0 = &lpuart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x2000000>;
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD	0xf1
+			MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD	0xf1
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B		0x1B000
+			MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT	0xB069
+			MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0	0x17061
+		>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	pinctrl-2 = <&pinctrl_usdhc0>;
+	pinctrl-3 = <&pinctrl_usdhc0>;
+	cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imxrt1050-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imxrt1050-pinfunc.h
new file mode 100644
index 0000000000000..22c14a3262add
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imxrt1050-pinfunc.h
@@ -0,0 +1,993 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
+#define _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
+
+#define IMX_PAD_SION	0x40000000
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00				0x014 0x204 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A			0x014 0x204 0x494 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK				0x014 0x204 0x500 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2				0x014 0x204 0x60C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00				0x014 0x204 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00				0x014 0x204 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01				0x018 0x208 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B			0x018 0x208 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0				0x018 0x208 0x4FC 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_01_XBAR_INOUT3				0x018 0x208 0x610 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXIO1_D01				0x018 0x208 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_GPIO4_IO01				0x018 0x208 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02				0x01C 0x20C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXPWM4_PWM1_A			0x01C 0x20C 0x498 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_LPSPI2_SDO				0x01C 0x20C 0x508 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_02_XBAR_INOUT4				0x01C 0x20C 0x614 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXIO1_D02				0x01C 0x20C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_GPIO4_IO02				0x01C 0x20C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03				0x020 0x210 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXPWM4_PWM1_B			0x020 0x210 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_LPSPI2_SDI				0x020 0x210 0x504 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_03_XBAR_INOUT5				0x020 0x210 0x618 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXIO1_D03				0x020 0x210 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_GPIO4_IO03				0x020 0x210 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04				0x024 0x214 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXPWM4_PWM2_A			0x024 0x214 0x49C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_SAI2_TX_DATA			0x024 0x214 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_XBAR_INOUT6				0x024 0x214 0x61C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXIO1_D04				0x024 0x214 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_GPIO4_IO04				0x024 0x214 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05				0x028 0x218 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXPWM4_PWM2_B			0x028 0x218 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_SAI2_TX_SYNC			0x028 0x218 0x5C4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_XBAR_INOUT7				0x028 0x218 0x620 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXIO1_D05				0x028 0x218 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_GPIO4_IO05				0x028 0x218 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06				0x02C 0x21C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXPWM2_PWM0_A			0x02C 0x21C 0x478 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_SAI2_TX_BCLK			0x02C 0x21C 0x5C0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_XBAR_INOUT8				0x02C 0x21C 0x624 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXIO1_D06				0x02C 0x21C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_GPIO4_IO06				0x02C 0x21C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07				0x030 0x220 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXPWM2_PWM0_B			0x030 0x220 0x488 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_SAI2_MCLK				0x030 0x220 0x5B0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_XBAR_INOUT9				0x030 0x220 0x628 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXIO1_D07				0x030 0x220 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_GPIO4_IO07				0x030 0x220 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00				0x034 0x224 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXPWM2_PWM1_A			0x034 0x224 0x47C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_SAI2_RX_DATA			0x034 0x224 0x5B8 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_XBAR_INOUT17			0x034 0x224 0x62C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXIO1_D08				0x034 0x224 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_GPIO4_IO08				0x034 0x224 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00				0x038 0x228 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXPWM2_PWM1_B			0x038 0x228 0x48C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_SAI2_RX_SYNC			0x038 0x228 0x5BC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXCAN2_TX				0x038 0x228 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXIO1_D09				0x038 0x228 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_GPIO4_IO09				0x038 0x228 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01				0x03C 0x22C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXPWM2_PWM2_A			0x03C 0x22C 0x480 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_SAI2_RX_BCLK			0x03C 0x22C 0x5B4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXCAN2_RX				0x03C 0x22C 0x450 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXIO1_D10				0x03C 0x22C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_GPIO4_IO10				0x03C 0x22C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02				0x040 0x230 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXPWM2_PWM2_B			0x040 0x230 0x490 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_LPI2C4_SDA				0x040 0x230 0x4E8 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_USDHC2_RESET_B			0x040 0x230 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXIO1_D11				0x040 0x230 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_GPIO4_IO11				0x040 0x230 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03				0x044 0x234 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_XBAR_INOUT24			0x044 0x234 0x640 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_LPI2C4_SCL				0x044 0x234 0x4E4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_USDHC2_WP				0x044 0x234 0x5D8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_FLEXPWM1_PWM3_A			0x044 0x234 0x454 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_12_GPIO4_IO12				0x044 0x234 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04				0x048 0x238 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_XBAR_INOUT25			0x048 0x238 0x650 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_13_LPUART3_TXD				0x048 0x238 0x53C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_MQS_RIGHT				0x048 0x238 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_FLEXPWM1_PWM3_B			0x048 0x238 0x464 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_13_GPIO4_IO13				0x048 0x238 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05				0x04C 0x23C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_XBAR_INOUT19			0x04C 0x23C 0x654 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_LPUART3_RXD				0x04C 0x23C 0x538 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_MQS_LEFT				0x04C 0x23C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_LPSPI2_PCS1				0x04C 0x23C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_GPIO4_IO14				0x04C 0x23C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06				0x050 0x240 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_XBAR_INOUT20			0x050 0x240 0x634 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_LPUART3_CTS_B			0x050 0x240 0x534 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_SPDIF_OUT				0x050 0x240 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_TMR3_TIMER0				0x050 0x240 0x57C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_GPIO4_IO15				0x050 0x240 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07				0x054 0x244 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_XBAR_INOUT21			0x054 0x244 0x658 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_LPUART3_RTS_B			0x054 0x244 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_SPDIF_IN				0x054 0x244 0x5C8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_16_TMR3_TIMER1				0x054 0x244 0x580 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_GPIO4_IO16				0x054 0x244 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08				0x058 0x248 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXPWM4_PWM3_A			0x058 0x248 0x4A0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_LPUART4_CTS_B			0x058 0x248 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXCAN1_TX				0x058 0x248 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_TMR3_TIMER2				0x058 0x248 0x584 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_GPIO4_IO17				0x058 0x248 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09				0x05C 0x24C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXPWM4_PWM3_B			0x05C 0x24C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_LPUART4_RTS_B			0x05C 0x24C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXCAN1_RX				0x05C 0x24C 0x44C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_18_TMR3_TIMER3				0x05C 0x24C 0x588 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_GPIO4_IO18				0x05C 0x24C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_SNVS_VIO_5_CTL			0x05C 0x24C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11				0x060 0x250 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_FLEXPWM2_PWM3_A			0x060 0x250 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_LPUART4_TXD				0x060 0x250 0x544 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_19_ENET_RX_DATA01			0x060 0x250 0x438 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_TMR2_TIMER0				0x060 0x250 0x56C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_GPIO4_IO19				0x060 0x250 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_SNVS_VIO_5				0x060 0x250 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12				0x064 0x254 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_FLEXPWM2_PWM3_B			0x064 0x254 0x484 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_20_LPUART4_RXD				0x064 0x254 0x540 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_20_ENET_RX_DATA00			0x064 0x254 0x434 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_TMR2_TIMER0				0x064 0x254 0x570 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_GPIO4_IO20				0x064 0x254 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0				0x068 0x258 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_FLEXPWM3_PWM3_A			0x068 0x258 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_LPI2C3_SDA				0x068 0x258 0x4E0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_ENET_TX_DATA01			0x068 0x258 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_TMR2_TIMER2				0x068 0x258 0x574 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_GPIO4_IO21				0x068 0x258 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1				0x06C 0x25C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_FLEXPWM3_PWM3_B			0x06C 0x25C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_LPI2C3_SCL				0x06C 0x25C 0x4DC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_ENET_TX_DATA00			0x06C 0x25C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_TMR2_TIMER3				0x06C 0x25C 0x578 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_GPIO4_IO22				0x06C 0x25C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10				0x070 0x260 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_FLEXPWM1_PWM0_A			0x070 0x260 0x458 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_LPUART5_TXD				0x070 0x260 0x54C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_ENET_RX_EN				0x070 0x260 0x43C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_GPT1_CAPTURE2			0x070 0x260 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_GPIO4_IO23				0x070 0x260 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS				0x074 0x264 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_FLEXPWM1_PWM0_B			0x074 0x264 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_LPUART5_RXD				0x074 0x264 0x548 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_ENET_TX_EN				0x074 0x264 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_GPT1_CAPTURE1			0x074 0x264 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_GPIO4_IO24				0x074 0x264 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS				0x078 0x268 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_FLEXPWM1_PWM1_A			0x078 0x268 0x45C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_LPUART6_TXD				0x078 0x268 0x554 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_TX_CLK				0x078 0x268 0x448 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_REF_CLK			0x078 0x268 0x42C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_GPIO4_IO25				0x078 0x268 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK				0x07C 0x26C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXPWM1_PWM1_B			0x07C 0x26C 0x46C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_LPUART6_RXD				0x07C 0x26C 0x550 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_ENET_RX_ER				0x07C 0x26C 0x440 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXIO1_D12				0x07C 0x26C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_GPIO4_IO26				0x07C 0x26C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE				0x080 0x270 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXPWM1_PWM2_A			0x080 0x270 0x460 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_LPUART5_RTS_B			0x080 0x270 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_LPSPI1_SCK				0x080 0x270 0x4F0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXIO1_D13				0x080 0x270 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_GPIO4_IO27				0x080 0x270 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE				0x084 0x274 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXPWM1_PWM2_B			0x084 0x274 0x470 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_LPUART5_CTS_B			0x084 0x274 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_LPSPI1_SDO				0x084 0x274 0x4F8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXIO1_D14				0x084 0x274 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_GPIO4_IO28				0x084 0x274 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0				0x088 0x278 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXPWM3_PWM0_A			0x088 0x278 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_LPUART6_RTS_B			0x088 0x278 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_LPSPI1_SDI				0x088 0x278 0x4F4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXIO1_D15				0x088 0x278 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_GPIO4_IO29				0x088 0x278 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08				0x08C 0x27C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_FLEXPWM3_PWM0_B			0x08C 0x27C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_LPUART6_CTS_B			0x08C 0x27C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_LPSPI1_PCS0				0x08C 0x27C 0x4EC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_30_CSI_DATA23				0x08C 0x27C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_GPIO4_IO30				0x08C 0x27C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09				0x090 0x280 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_FLEXPWM3_PWM1_A			0x090 0x280 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_LPUART7_TXD				0x090 0x280 0x55C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_31_LPSPI1_PCS1				0x090 0x280 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_CSI_DATA22				0x090 0x280 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_GPIO4_IO31				0x090 0x280 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10				0x094 0x284 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_FLEXPWM3_PWM1_B			0x094 0x284 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_LPUART7_RXD				0x094 0x284 0x558 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_32_CCM_PMIC_READY			0x094 0x284 0x3FC 0x3 0x4
+#define MXRT1050_IOMUXC_GPIO_EMC_32_CSI_DATA21				0x094 0x284 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_GPIO3_IO18				0x094 0x284 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11				0x098 0x288 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_FLEXPWM3_PWM2_A			0x098 0x288 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_USDHC1_RESET_B			0x098 0x288 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_SAI3_RX_DATA			0x098 0x288 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_CSI_DATA20				0x098 0x288 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_GPIO3_IO19				0x098 0x288 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12				0x09C 0x28C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_FLEXPWM3_PWM2_B			0x09C 0x28C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_USDHC1_VSELECT			0x09C 0x28C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_SAI3_RX_SYNC			0x09C 0x28C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_CSI_DATA19				0x09C 0x28C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_GPIO3_IO20				0x09C 0x28C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13				0x0A0 0x290 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_XBAR_INOUT18			0x0A0 0x290 0x630 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_GPT1_COMPARE1			0x0A0 0x290 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_SAI3_RX_BCLK			0x0A0 0x290 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_CSI_DATA18				0x0A0 0x290 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_GPIO3_IO21				0x0A0 0x290 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_USDHC1_CD_B				0x0A0 0x290 0x5D4 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14				0x0A4 0x294 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_XBAR_INOUT22			0x0A4 0x294 0x638 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_GPT1_COMPARE2			0x0A4 0x294 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_SAI3_TX_DATA			0x0A4 0x294 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_CSI_DATA17				0x0A4 0x294 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_GPIO3_IO22				0x0A4 0x294 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_USDHC1_WP				0x0A4 0x294 0x5D8 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15				0x0A8 0x298 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_XBAR_INOUT23			0x0A8 0x298 0x63C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_GPT1_COMPARE3			0x0A8 0x298 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_SAI3_MCLK				0x0A8 0x298 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_CSI_DATA16				0x0A8 0x298 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_GPIO3_IO23				0x0A8 0x298 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_USDHC2_WP				0x0A8 0x298 0x608 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01				0x0AC 0x29C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_FLEXPWM1_PWM3_A			0x0AC 0x29C 0x454 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_38_LPUART8_TXD				0x0AC 0x29C 0x564 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_38_SAI3_TX_BCLK			0x0AC 0x29C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_CSI_FIELD				0x0AC 0x29C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_GPIO3_IO24				0x0AC 0x29C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_USDHC2_VSELECT			0x0AC 0x29C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS				0x0B0 0x2A0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_FLEXPWM1_PWM3_B			0x0B0 0x2A0 0x464 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_39_LPUART8_RXD				0x0B0 0x2A0 0x560 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_39_SAI3_TX_SYNC			0x0B0 0x2A0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_WDOG1_B				0x0B0 0x2A0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_GPIO3_IO25				0x0B0 0x2A0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_USDHC2_CD_B				0x0B0 0x2A0 0x5E0 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_EMC_40_SEMC_RDY				0x0B4 0x2A4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_GPT2_CAPTURE2			0x0B4 0x2A4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_LPSPI1_PCS2				0x0B4 0x2A4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_USB_OTG2_OC				0x0B4 0x2A4 0x5CC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_40_ENET_MDC				0x0B4 0x2A4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_GPIO3_IO26				0x0B4 0x2A4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_USDHC2_RESET_B			0x0B4 0x2A4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_41_SEMC_CSX0				0x0B8 0x2A8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_GPT2_CAPTURE1			0x0B8 0x2A8 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_LPSPI1_PCS3				0x0B8 0x2A8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_USB_OTG2_PWR			0x0B8 0x2A8 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_ENET_MDIO				0x0B8 0x2A8 0x430 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_41_GPIO3_IO27				0x0B8 0x2A8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_USDHC2_VSELECT			0x0B8 0x2A8 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_FLEXPWM2_PWM3_A			0x0BC 0x2AC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_XBAR_INOUT14			0x0BC 0x2AC 0x644 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_REF_CLK_32K			0x0BC 0x2AC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USB_OTG2_ID			0x0BC 0x2AC 0x3F8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPI2C1_SCLS			0x0BC 0x2AC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_GPIO1_IO00			0x0BC 0x2AC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USDHC1_RESET_B			0x0BC 0x2AC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPSPI3_SCK			0x0BC 0x2AC 0x510 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_FLEXPWM2_PWM3_B			0x0C0 0x2B0 0x484 0x0 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_XBAR_INOUT15			0x0C0 0x2B0 0x648 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_REF_CLK_24M			0x0C0 0x2B0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_USB_OTG1_ID			0x0C0 0x2B0 0x3F4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPI2C1_SDAS			0x0C0 0x2B0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_GPIO1_IO01			0x0C0 0x2B0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_EWM_OUT_B				0x0C0 0x2B0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPSPI3_SDO			0x0C0 0x2B0 0x518 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXCAN2_TX			0x0C4 0x2B4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_XBAR_INOUT16			0x0C4 0x2B4 0x64C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPUART6_TXD			0x0C4 0x2B4 0x554 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_USB_OTG1_PWR			0x0C4 0x2B4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXPWM1_PWM0_X			0x0C4 0x2B4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02			0x0C4 0x2B4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPI2C1_HREQ			0x0C4 0x2B4 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPSPI3_SDI			0x0C4 0x2B4 0x514 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXCAN2_RX			0x0C8 0x2B8 0x450 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_XBAR_INOUT17			0x0C8 0x2B8 0x62C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPUART6_RXD			0x0C8 0x2B8 0x550 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_USB_OTG1_OC			0x0C8 0x2B8 0x5D0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXPWM1_PWM1_X			0x0C8 0x2B8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_GPIO1_IO03			0x0C8 0x2B8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_REF_CLK_24M			0x0C8 0x2B8 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPSPI3_PCS0			0x0C8 0x2B8 0x50C 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SRC_BOOT_MODE00			0x0CC 0x2BC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_MQS_RIGHT				0x0CC 0x2BC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_ENET_TX_DATA03			0x0CC 0x2BC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SAI2_TX_SYNC			0x0CC 0x2BC 0x5C4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_CSI_DATA09			0x0CC 0x2BC 0x41C 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_GPIO1_IO04			0x0CC 0x2BC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_PIT_TRIGGER00			0x0CC 0x2BC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_LPSPI3_PCS1			0x0CC 0x2BC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SRC_BOOT_MODE01			0x0D0 0x2C0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_MQS_LEFT				0x0D0 0x2C0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_ENET_TX_DATA02			0x0D0 0x2C0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SAI2_TX_BCLK			0x0D0 0x2C0 0x5C0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_CSI_DATA08			0x0D0 0x2C0 0x418 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_GPIO1_IO05			0x0D0 0x2C0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_XBAR_INOUT17			0x0D0 0x2C0 0x62C 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_LPSPI3_PCS2			0x0D0 0x2C0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_JTAG_TMS				0x0D4 0x2C4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPT2_COMPARE1			0x0D4 0x2C4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_ENET_RX_CLK			0x0D4 0x2C4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_SAI2_RX_BCLK			0x0D4 0x2C4 0x5B4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_CSI_DATA07			0x0D4 0x2C4 0x414 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPIO1_IO06			0x0D4 0x2C4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_XBAR_INOUT18			0x0D4 0x2C4 0x630 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_LPSPI3_PCS3			0x0D4 0x2C4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_JTAG_TCK				0x0D8 0x2C8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPT2_COMPARE2			0x0D8 0x2C8 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_TX_ER			0x0D8 0x2C8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_SAI2_RX_SYNC			0x0D8 0x2C8 0x5BC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_CSI_DATA06			0x0D8 0x2C8 0x410 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPIO1_IO07			0x0D8 0x2C8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_XBAR_INOUT19			0x0D8 0x2C8 0x654 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_1588_EVENT3_OUT		0x0D8 0x2C8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_JTAG_MOD				0x0DC 0x2CC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPT2_COMPARE3			0x0DC 0x2CC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_RX_DATA03			0x0DC 0x2CC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_SAI2_RX_DATA			0x0DC 0x2CC 0x5B8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_CSI_DATA05			0x0DC 0x2CC 0x40C 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPIO1_IO08			0x0DC 0x2CC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_XBAR_INOUT20			0x0DC 0x2CC 0x634 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_1588_EVENT3_IN		0x0DC 0x2CC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_JTAG_TDI				0x0E0 0x2D0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_FLEXPWM2_PWM3_A			0x0E0 0x2D0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_ENET_RX_DATA02			0x0E0 0x2D0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_SAI2_TX_DATA			0x0E0 0x2D0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_CSI_DATA04			0x0E0 0x2D0 0x408 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPIO1_IO09			0x0E0 0x2D0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_XBAR_INOUT21			0x0E0 0x2D0 0x658 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPT2_CLK				0x0E0 0x2D0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_JTAG_TDO				0x0E4 0x2D4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_FLEXPWM1_PWM3_A			0x0E4 0x2D4 0x454 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_CRS				0x0E4 0x2D4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_SAI2_MCLK				0x0E4 0x2D4 0x5B0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_CSI_DATA03			0x0E4 0x2D4 0x404 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_GPIO1_IO10			0x0E4 0x2D4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_XBAR_INOUT22			0x0E4 0x2D4 0x638 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_1588_EVENT0_OUT		0x0E4 0x2D4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_JTAG_TRSTB			0x0E8 0x2D8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_FLEXPWM1_PWM3_B			0x0E8 0x2D8 0x464 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_COL				0x0E8 0x2D8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_WDOG1_B				0x0E8 0x2D8 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_CSI_DATA02			0x0E8 0x2D8 0x400 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_GPIO1_IO11			0x0E8 0x2D8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_XBAR_INOUT23			0x0E8 0x2D8 0x63C 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_1588_EVENT0_IN		0x0E8 0x2D8 0x444 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPI2C4_SCL			0x0EC 0x2DC 0x4E4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_CCM_PMIC_READY			0x0EC 0x2DC 0x3FC 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD			0x0EC 0x2DC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_WDOG2_B				0x0EC 0x2DC 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_FLEXPWM1_PWM2_X			0x0EC 0x2DC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_GPIO1_IO12			0x0EC 0x2DC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_ENET_1588_EVENT1_OUT		0x0EC 0x2DC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_NMI				0x0EC 0x2DC 0x568 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPI2C4_SDA			0x0F0 0x2E0 0x4E8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPT1_CLK				0x0F0 0x2E0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD			0x0F0 0x2E0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_EWM_OUT_B				0x0F0 0x2E0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_FLEXPWM1_PWM3_X			0x0F0 0x2E0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPIO1_IO13			0x0F0 0x2E0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_ENET_1588_EVENT1_IN		0x0F0 0x2E0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_REF_CLK_24M			0x0F0 0x2E0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_USB_OTG2_OC			0x0F4 0x2E4 0x5CC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_XBAR_INOUT24			0x0F4 0x2E4 0x640 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_LPUART1_CTS_B			0x0F4 0x2E4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_ENET_1588_EVENT0_OUT		0x0F4 0x2E4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_CSI_VSYNC				0x0F4 0x2E4 0x428 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_GPIO1_IO14			0x0F4 0x2E4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX			0x0F4 0x2E4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_USB_OTG2_PWR			0x0F8 0x2E8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_XBAR_INOUT25			0x0F8 0x2E8 0x650 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_LPUART1_RTS_B			0x0F8 0x2E8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_ENET_1588_EVENT0_IN		0x0F8 0x2E8 0x444 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_CSI_HSYNC				0x0F8 0x2E8 0x420 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_GPIO1_IO15			0x0F8 0x2E8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX			0x0F8 0x2E8 0x450 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_WDOG1_WDOG_RST_B_DEB		0x0F8 0x2E8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USB_OTG2_ID			0x0FC 0x2EC 0x3F8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_TMR3_TIMER0			0x0FC 0x2EC 0x57C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPUART2_CTS_B			0x0FC 0x2EC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL			0x0FC 0x2EC 0x4CC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_WDOG1_B				0x0FC 0x2EC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_GPIO1_IO16			0x0FC 0x2EC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USDHC1_WP				0x0FC 0x2EC 0x5D8 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_KPP_ROW07				0x0FC 0x2EC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USB_OTG1_PWR			0x100 0x2F0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_TMR3_TIMER1			0x100 0x2F0 0x580 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPUART2_RTS_B			0x100 0x2F0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA			0x100 0x2F0 0x4D0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_CCM_PMIC_READY			0x100 0x2F0 0x3FC 0x4 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_GPIO1_IO17			0x100 0x2F0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USDHC1_VSELECT			0x100 0x2F0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_KPP_COL07				0x100 0x2F0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USB_OTG1_ID			0x104 0x2F4 0x3F4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_TMR3_TIMER2			0x104 0x2F4 0x584 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_LPUART2_TXD			0x104 0x2F4 0x530 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_SPDIF_OUT				0x104 0x2F4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_ENET_1588_EVENT2_OUT		0x104 0x2F4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_GPIO1_IO18			0x104 0x2F4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USDHC1_CD_B			0x104 0x2F4 0x5D4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_KPP_ROW06				0x104 0x2F4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USB_OTG1_OC			0x108 0x2F8 0x5D0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_TMR3_TIMER3			0x108 0x2F8 0x588 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_LPUART2_RXD			0x108 0x2F8 0x52C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_SPDIF_IN				0x108 0x2F8 0x5C8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_ENET_1588_EVENT2_IN		0x108 0x2F8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_GPIO1_IO19			0x108 0x2F8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USDHC2_CD_B			0x108 0x2F8 0x5E0 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_KPP_COL06				0x108 0x2F8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_FLEXSPI_B_DATA3			0x10C 0x2FC 0x4C4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_ENET_MDC				0x10C 0x2FC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_LPUART3_CTS_B			0x10C 0x2FC 0x534 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_SPDIF_SR_CLK			0x10C 0x2FC 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK			0x10C 0x2FC 0x424 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_GPIO1_IO20			0x10C 0x2FC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_USDHC2_DATA0			0x10C 0x2FC 0x5E8 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_KPP_ROW05				0x10C 0x2FC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_FLEXSPI_B_DATA2			0x110 0x300 0x4C0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_ENET_MDIO				0x110 0x300 0x430 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_LPUART3_RTS_B			0x110 0x300 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_SPDIF_OUT				0x110 0x300 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_CSI_MCLK				0x110 0x300 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_GPIO1_IO21			0x110 0x300 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_USDHC2_DATA1			0x110 0x300 0x5EC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_KPP_COL05				0x110 0x300 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_FLEXSPI_B_DATA1			0x114 0x304 0x4BC 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA			0x114 0x304 0x4E0 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPUART3_TXD			0x114 0x304 0x53C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_SPDIF_LOCK			0x114 0x304 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_CSI_VSYNC				0x114 0x304 0x428 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_GPIO1_IO22			0x114 0x304 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_USDHC2_DATA2			0x114 0x304 0x5F0 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_KPP_ROW04				0x114 0x304 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_FLEXSPI_B_DATA0			0x118 0x308 0x4B8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL			0x118 0x308 0x4DC 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPUART3_RXD			0x118 0x308 0x538 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_SPDIF_EXT_CLK			0x118 0x308 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_CSI_HSYNC				0x118 0x308 0x420 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_GPIO1_IO23			0x118 0x308 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_USDHC2_DATA3			0x118 0x308 0x5F4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_KPP_COL04				0x118 0x308 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXSPI_A_SS1_B			0x11C 0x30C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXPWM4_PWM0_A			0x11C 0x30C 0x494 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXCAN1_TX			0x11C 0x30C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CCM_PMIC_READY			0x11C 0x30C 0x3FC 0x3 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CSI_DATA09			0x11C 0x30C 0x41C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_GPIO1_IO24			0x11C 0x30C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_USDHC2_CMD			0x11C 0x30C 0x5E4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_KPP_ROW03				0x11C 0x30C 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXSPI_A_DQS			0x120 0x310 0x4A4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXPWM4_PWM1_A			0x120 0x310 0x498 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXCAN1_RX			0x120 0x310 0x44C 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_SAI1_MCLK				0x120 0x310 0x58C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_CSI_DATA08			0x120 0x310 0x418 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_GPIO1_IO25			0x120 0x310 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_USDHC2_CLK			0x120 0x310 0x5DC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_KPP_COL03				0x120 0x310 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_FLEXSPI_A_DATA3			0x124 0x314 0x4B4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_WDOG1_B				0x124 0x314 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_LPUART8_TXD			0x124 0x314 0x564 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_SAI1_RX_SYNC			0x124 0x314 0x5A4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_CSI_DATA07			0x124 0x314 0x414 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_GPIO1_IO26			0x124 0x314 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_USDHC2_WP				0x124 0x314 0x608 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_KPP_ROW02				0x124 0x314 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_FLEXSPI_A_DATA2			0x128 0x318 0x4B0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_EWM_OUT_B				0x128 0x318 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_LPUART8_RXD			0x128 0x318 0x560 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_SAI1_RX_BCLK			0x128 0x318 0x590 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_CSI_DATA06			0x128 0x318 0x410 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_GPIO1_IO27			0x128 0x318 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_USDHC2_RESET_B			0x128 0x318 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_KPP_COL02				0x128 0x318 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_FLEXSPI_A_DATA1			0x12C 0x31C 0x4AC 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_ACMP1_OUT				0x12C 0x31C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_LPSPI3_PCS0			0x12C 0x31C 0x50C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_SAI1_RX_DATA00			0x12C 0x31C 0x594 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_CSI_DATA05			0x12C 0x31C 0x40C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_GPIO1_IO28			0x12C 0x31C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_USDHC2_DATA4			0x12C 0x31C 0x5F8 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_KPP_ROW01				0x12C 0x31C 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_FLEXSPI_A_DATA0			0x130 0x320 0x4A8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_ACMP2_OUT				0x130 0x320 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_LPSPI3_SDI			0x130 0x320 0x514 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_SAI1_TX_DATA00			0x130 0x320 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_CSI_DATA04			0x130 0x320 0x408 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_GPIO1_IO29			0x130 0x320 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_USDHC2_DATA5			0x130 0x320 0x5FC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_KPP_COL01				0x130 0x320 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_FLEXSPI_A_SCLK			0x134 0x324 0x4C8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_ACMP3_OUT				0x134 0x324 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO			0x134 0x324 0x518 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_SAI1_TX_BCLK			0x134 0x324 0x5A8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_CSI_DATA03			0x134 0x324 0x404 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_GPIO1_IO30			0x134 0x324 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_USDHC2_DATA6			0x134 0x324 0x600 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_KPP_ROW00				0x134 0x324 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_FLEXSPI_A_SS0_B			0x138 0x328 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_ACMP4_OUT				0x138 0x328 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_LPSPI3_SCK			0x138 0x328 0x510 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_SAI1_TX_SYNC			0x138 0x328 0x5AC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_CSI_DATA02			0x138 0x328 0x400 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_GPIO1_IO31			0x138 0x328 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_USDHC2_DATA7			0x138 0x328 0x604 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_KPP_COL00				0x138 0x328 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK				0x13C 0x32C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_TMR1_TIMER0				0x13C 0x32C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_MQS_RIGHT				0x13C 0x32C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_LPSPI4_PCS0				0x13C 0x32C 0x51C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_FLEXIO2_D00				0x13C 0x32C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_GPIO2_IO00				0x13C 0x32C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_SEMC_CSX1				0x13C 0x32C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE				0x140 0x330 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_TMR1_TIMER1				0x140 0x330 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_MQS_LEFT				0x140 0x330 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_LPSPI4_SDI				0x140 0x330 0x524 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_FLEXIO2_D01				0x140 0x330 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_GPIO2_IO01				0x140 0x330 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_SEMC_CSX2				0x140 0x330 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC				0x144 0x334 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_TMR1_TIMER2				0x144 0x334 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXCAN1_TX				0x144 0x334 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_LPSPI4_SDO				0x144 0x334 0x528 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXIO2_D02				0x144 0x334 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_GPIO2_IO02				0x144 0x334 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_SEMC_CSX3				0x144 0x334 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC				0x148 0x338 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_TMR2_TIMER0				0x148 0x338 0x56C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXCAN1_RX				0x148 0x338 0x44C 0x2 0x3
+#define MXRT1050_IOMUXC_GPIO_B0_03_LPSPI4_SCK				0x148 0x338 0x520 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXIO2_D03				0x148 0x338 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_GPIO2_IO03				0x148 0x338 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_WDOG2_RESET_B_DEB			0x148 0x338 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00				0x14C 0x33C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_TMR2_TIMER1				0x14C 0x33C 0x570 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_04_LPI2C2_SCL				0x14C 0x33C 0x4D4 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_04_ARM_TRACE00				0x14C 0x33C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_FLEXIO2_D04				0x14C 0x33C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_GPIO2_IO04				0x14C 0x33C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_SRC_BT_CFG00				0x14C 0x33C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01				0x150 0x340 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_TMR2_TIMER2				0x150 0x340 0x574 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_05_LPI2C2_SDA				0x150 0x340 0x4D8 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_05_ARM_TRACE01				0x150 0x340 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_FLEXIO2_D05				0x150 0x340 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_GPIO2_IO05				0x150 0x340 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_SRC_BT_CFG01				0x150 0x340 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02				0x154 0x344 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_TMR3_TIMER0				0x154 0x344 0x57C 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXPWM2_PWM0_A			0x154 0x344 0x478 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_06_ARM_TRACE02				0x154 0x344 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXIO2_D06				0x154 0x344 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_GPIO2_IO06				0x154 0x344 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_SRC_BT_CFG02				0x154 0x344 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03				0x158 0x348 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_TMR3_TIMER1				0x158 0x348 0x580 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXPWM2_PWM0_B			0x158 0x348 0x488 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_07_ARM_TRACE03				0x158 0x348 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXIO2_D07				0x158 0x348 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_GPIO2_IO07				0x158 0x348 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_SRC_BT_CFG03				0x158 0x348 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04				0x15C 0x34C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_TMR3_TIMER2				0x15C 0x34C 0x584 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXPWM2_PWM1_A			0x15C 0x34C 0x47C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_08_LPUART3_TXD				0x15C 0x34C 0x53C 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXIO2_D08				0x15C 0x34C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_GPIO2_IO08				0x15C 0x34C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_SRC_BT_CFG04				0x15C 0x34C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05				0x160 0x350 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_TMR4_TIMER0				0x160 0x350 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXPWM2_PWM1_B			0x160 0x350 0x48C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_09_LPUART3_RXD				0x160 0x350 0x538 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXIO2_D09				0x160 0x350 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_GPIO2_IO09				0x160 0x350 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_SRC_BT_CFG05				0x160 0x350 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06				0x164 0x354 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_TMR4_TIMER1				0x164 0x354 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXPWM2_PWM2_A			0x164 0x354 0x480 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_10_SAI1_TX_DATA03			0x164 0x354 0x598 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXIO2_D10				0x164 0x354 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_GPIO2_IO10				0x164 0x354 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_SRC_BT_CFG06				0x164 0x354 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07				0x168 0x358 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_TMR4_TIMER2				0x168 0x358 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXPWM2_PWM2_B			0x168 0x358 0x490 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_11_SAI1_TX_DATA02			0x168 0x358 0x59C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXIO2_D11				0x168 0x358 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_GPIO2_IO11				0x168 0x358 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_SRC_BT_CFG07				0x168 0x358 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08				0x16C 0x35C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_XBAR_INOUT10				0x16C 0x35C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_ARM_TRACE_CLK			0x16C 0x35C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_SAI1_TX_DATA01			0x16C 0x35C 0x5A0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_12_FLEXIO2_D12				0x16C 0x35C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_GPIO2_IO12				0x16C 0x35C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_SRC_BT_CFG08				0x16C 0x35C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09				0x170 0x360 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_XBAR_INOUT11				0x170 0x360 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_ARM_TRACE_SWO			0x170 0x360 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_SAI1_MCLK				0x170 0x360 0x58C 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_13_FLEXIO2_D13				0x170 0x360 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_GPIO2_IO13				0x170 0x360 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_SRC_BT_CFG09				0x170 0x360 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10				0x174 0x364 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_XBAR_INOUT12				0x174 0x364 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_ARM_CM7_TXEV				0x174 0x364 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_SAI1_RX_SYNC				0x174 0x364 0x5A4 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_14_FLEXIO2_D14				0x174 0x364 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_GPIO2_IO14				0x174 0x364 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_SRC_BT_CFG10				0x174 0x364 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11				0x178 0x368 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_XBAR_INOUT13				0x178 0x368 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_ARM_CM7_RXEV				0x178 0x368 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_SAI1_RX_BCLK				0x178 0x368 0x590 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_15_FLEXIO2_D15				0x178 0x368 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_GPIO2_IO15				0x178 0x368 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_SRC_BT_CFG11				0x178 0x368 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_00_LCD_DATA12				0x17C 0x36C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_XBAR_INOUT14				0x17C 0x36C 0x644 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_00_LPUART4_TXD				0x17C 0x36C 0x544 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_00_SAI1_RX_DATA00			0x17C 0x36C 0x594 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXIO2_D16				0x17C 0x36C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_GPIO2_IO16				0x17C 0x36C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXPWM1_PWM3_A			0x17C 0x36C 0x454 0x6 0x4
+
+#define MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13				0x180 0x370 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_XBAR_INOUT15				0x180 0x370 0x648 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_01_LPUART4_RXD				0x180 0x370 0x540 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_01_SAI1_TX_DATA00			0x180 0x370 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXIO2_D17				0x180 0x370 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_GPIO2_IO17				0x180 0x370 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXPWM1_PWM3_B			0x180 0x370 0x464 0x6 0x4
+
+#define MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14				0x184 0x374 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_XBAR_INOUT16				0x184 0x374 0x64C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_02_LPSPI4_PCS2				0x184 0x374 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_SAI1_TX_BCLK				0x184 0x374 0x5A8 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXIO2_D18				0x184 0x374 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_GPIO2_IO18				0x184 0x374 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXPWM2_PWM3_A			0x184 0x374 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15				0x188 0x378 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_XBAR_INOUT17				0x188 0x378 0x62C 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_B1_03_LPSPI4_PCS1				0x188 0x378 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_SAI1_TX_SYNC				0x188 0x378 0x5AC 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXIO2_D19				0x188 0x378 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_GPIO2_IO19				0x188 0x378 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXPWM2_PWM3_B			0x188 0x378 0x484 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_04_LCD_DATA16				0x18C 0x37C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_LPSPI4_PCS0				0x18C 0x37C 0x51C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_04_CSI_DATA15				0x18C 0x37C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_ENET_RX_DATA00			0x18C 0x37C 0x434 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_04_FLEXIO2_D20				0x18C 0x37C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_GPIO2_IO20				0x18C 0x37C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_05_LCD_DATA17				0x190 0x380 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_LPSPI4_SDI				0x190 0x380 0x524 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_05_CSI_DATA14				0x190 0x380 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_ENET_RX_DATA01			0x190 0x380 0x438 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_05_FLEXIO2_D21				0x190 0x380 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_GPIO2_IO21				0x190 0x380 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_06_LCD_DATA18				0x194 0x384 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_LPSPI4_SDO				0x194 0x384 0x528 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_06_CSI_DATA13				0x194 0x384 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_ENET_RX_EN				0x194 0x384 0x43C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_06_FLEXIO2_D22				0x194 0x384 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_GPIO2_IO22				0x194 0x384 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_07_LCD_DATA19				0x198 0x388 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_LPSPI4_SCK				0x198 0x388 0x520 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_07_CSI_DATA12				0x198 0x388 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_ENET_TX_DATA00			0x198 0x388 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_FLEXIO2_D23				0x198 0x388 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_GPIO2_IO23				0x198 0x388 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_08_LCD_DATA20				0x19C 0x38C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_TMR1_TIMER3				0x19C 0x38C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_CSI_DATA11				0x19C 0x38C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_ENET_TX_DATA01			0x19C 0x38C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXIO2_D24				0x19C 0x38C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_GPIO2_IO24				0x19C 0x38C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXCAN2_TX				0x19C 0x38C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_09_LCD_DATA21				0x1A0 0x390 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_TMR2_TIMER3				0x1A0 0x390 0x578 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_09_CSI_DATA10				0x1A0 0x390 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_ENET_TX_EN				0x1A0 0x390 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXIO2_D25				0x1A0 0x390 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_GPIO2_IO25				0x1A0 0x390 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXCAN2_RX				0x1A0 0x390 0x450 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_10_LCD_DATA22				0x1A4 0x394 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_TMR3_TIMER3				0x1A4 0x394 0x588 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_10_CSI_DATA00				0x1A4 0x394 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_TX_CLK				0x1A4 0x394 0x448 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_10_FLEXIO2_D26				0x1A4 0x394 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_GPIO2_IO26				0x1A4 0x394 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_REF_CLK				0x1A4 0x394 0x42C 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_B1_11_LCD_DATA23				0x1A8 0x398 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_TMR4_TIMER3				0x1A8 0x398 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_CSI_DATA01				0x1A8 0x398 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_ENET_RX_ER				0x1A8 0x398 0x440 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_11_FLEXIO2_D27				0x1A8 0x398 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_GPIO2_IO27				0x1A8 0x398 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_LPSPI4_PCS3				0x1A8 0x398 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_12_LPUART5_TXD				0x1AC 0x39C 0x54C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_12_CSI_PIXCLK				0x1AC 0x39C 0x424 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_12_ENET_1588_EVENT0_IN			0x1AC 0x39C 0x444 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_12_FLEXIO2_D28				0x1AC 0x39C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_12_GPIO2_IO28				0x1AC 0x39C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B				0x1AC 0x39C 0x5D4 0x6 0x2
+
+#define MXRT1050_IOMUXC_GPIO_B1_13_WDOG1_B				0x1B0 0x3A0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_LPUART5_RXD				0x1B0 0x3A0 0x548 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_13_CSI_VSYNC				0x1B0 0x3A0 0x428 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_13_ENET_1588_EVENT0_OUT			0x1B0 0x3A0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_FLEXIO2_D29				0x1B0 0x3A0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_GPIO2_IO29				0x1B0 0x3A0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_USDHC1_WP				0x1B0 0x3A0 0x5D8 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_14_ENET_MDC				0x1B4 0x3A4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXPWM4_PWM2_A			0x1B4 0x3A4 0x49C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_14_CSI_HSYNC				0x1B4 0x3A4 0x420 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_14_XBAR_INOUT02				0x1B4 0x3A4 0x60C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXIO2_D30				0x1B4 0x3A4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_GPIO2_IO30				0x1B4 0x3A4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT			0x1B4 0x3A4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_15_ENET_MDIO				0x1B8 0x3A8 0x430 0x0 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXPWM4_PWM3_A			0x1B8 0x3A8 0x4A0 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_15_CSI_MCLK				0x1B8 0x3A8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_XBAR_INOUT03				0x1B8 0x3A8 0x610 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXIO2_D31				0x1B8 0x3A8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31				0x1B8 0x3A8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_USDHC1_RESET_B			0x1B8 0x3A8 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD			0x1BC 0x3AC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXPWM1_PWM0_A			0x1BC 0x3AC 0x458 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPI2C3_SCL			0x1BC 0x3AC 0x4DC 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_XBAR_INOUT04			0x1BC 0x3AC 0x614 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPSPI1_SCK			0x1BC 0x3AC 0x4F0 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_GPIO3_IO12			0x1BC 0x3AC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXSPI_A_SS1_B			0x1BC 0x3AC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK			0x1C0 0x3B0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXPWM1_PWM0_B			0x1C0 0x3B0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPI2C3_SDA			0x1C0 0x3B0 0x4E0 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_XBAR_INOUT05			0x1C0 0x3B0 0x618 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPSPI1_PCS0			0x1C0 0x3B0 0x4EC 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_GPIO3_IO13			0x1C0 0x3B0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXSPI_B_SS1_B			0x1C0 0x3B0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0			0x1C4 0x3B4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_FLEXPWM1_PWM1_A			0x1C4 0x3B4 0x45C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPUART8_CTS_B			0x1C4 0x3B4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_XBAR_INOUT06			0x1C4 0x3B4 0x61C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO			0x1C4 0x3B4 0x4F8 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_GPIO3_IO14			0x1C4 0x3B4 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1			0x1C8 0x3B8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_FLEXPWM1_PWM1_B			0x1C8 0x3B8 0x46C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPUART8_RTS_B			0x1C8 0x3B8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_XBAR_INOUT07			0x1C8 0x3B8 0x620 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI			0x1C8 0x3B8 0x4F4 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_GPIO3_IO15			0x1C8 0x3B8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2			0x1CC 0x3BC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXPWM1_PWM2_A			0x1CC 0x3BC 0x460 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_LPUART8_TXD			0x1CC 0x3BC 0x564 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_XBAR_INOUT08			0x1CC 0x3BC 0x624 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXSPI_B_SS0_B			0x1CC 0x3BC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_GPIO3_IO16			0x1CC 0x3BC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_CCM_CLKO1				0x1CC 0x3BC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3			0x1D0 0x3C0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXPWM1_PWM2_B			0x1D0 0x3C0 0x470 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_LPUART8_RXD			0x1D0 0x3C0 0x560 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_XBAR_INOUT09			0x1D0 0x3C0 0x628 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXSPI_B_DQS			0x1D0 0x3C0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_GPIO3_IO17			0x1D0 0x3C0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_CCM_CLKO2				0x1D0 0x3C0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_USDHC2_DATA3			0x1D4 0x3C4 0x5F4 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXSPI_B_DATA3			0x1D4 0x3C4 0x4C4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXPWM1_PWM3_A			0x1D4 0x3C4 0x454 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_SAI1_TX_DATA03			0x1D4 0x3C4 0x598 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_LPUART4_TXD			0x1D4 0x3C4 0x544 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_GPIO3_IO00			0x1D4 0x3C4 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_USDHC2_DATA2			0x1D8 0x3C8 0x5F0 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXSPI_B_DATA2			0x1D8 0x3C8 0x4C0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXPWM1_PWM3_B			0x1D8 0x3C8 0x464 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_SAI1_TX_DATA02			0x1D8 0x3C8 0x59C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_LPUART4_RXD			0x1D8 0x3C8 0x540 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_GPIO3_IO01			0x1D8 0x3C8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_USDHC2_DATA1			0x1DC 0x3CC 0x5EC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXSPI_B_DATA1			0x1DC 0x3CC 0x4BC 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXPWM2_PWM3_A			0x1DC 0x3CC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_SAI1_TX_DATA01			0x1DC 0x3CC 0x5A0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXCAN1_TX			0x1DC 0x3CC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_GPIO3_IO02			0x1DC 0x3CC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_CCM_WAIT				0x1DC 0x3CC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_USDHC2_DATA0			0x1E0 0x3D0 0x5E8 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXSPI_B_DATA0			0x1E0 0x3D0 0x4B8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXPWM2_PWM3_B			0x1E0 0x3D0 0x484 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_SAI1_MCLK				0x1E0 0x3D0 0x58C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXCAN1_RX			0x1E0 0x3D0 0x44C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_GPIO3_IO03			0x1E0 0x3D0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_CCM_PMIC_READY			0x1E0 0x3D0 0x3FC 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_USDHC2_CLK			0x1E4 0x3D4 0x5DC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXSPI_B_SCLK			0x1E4 0x3D4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_LPI2C1_SCL			0x1E4 0x3D4 0x4CC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_SAI1_RX_SYNC			0x1E4 0x3D4 0x5A4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXCAN1_A_SS1_B			0x1E4 0x3D4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_GPIO3_IO04			0x1E4 0x3D4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_CCM_STOP				0x1E4 0x3D4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_USDHC2_CMD			0x1E8 0x3D8 0x5E4 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXSPI_A_DQS			0x1E8 0x3D8 0x4A4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_LPI2C1_SDA			0x1E8 0x3D8 0x4D0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_SAI1_RX_BCLK			0x1E8 0x3D8 0x590 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXCAN1_B_SS0_B			0x1E8 0x3D8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_GPIO3_IO05			0x1E8 0x3D8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_USDHC2_RESET_B			0x1EC 0x3DC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_SS0_B			0x1EC 0x3DC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPUART7_CTS_B			0x1EC 0x3DC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_SAI1_RX_DATA00			0x1EC 0x3DC 0x594 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPSPI2_PCS0			0x1EC 0x3DC 0x4FC 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_GPIO3_IO06			0x1EC 0x3DC 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SEMC_CSX1				0x1F0 0x3E0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK			0x1F0 0x3E0 0x4C8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPUART7_RTS_B			0x1F0 0x3E0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SAI1_TX_DATA00			0x1F0 0x3E0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPSPI2_SCK			0x1F0 0x3E0 0x500 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_GPIO3_IO07			0x1F0 0x3E0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_CCM_REF_EN_B			0x1F0 0x3E0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_USDHC2_DATA4			0x1F4 0x3E4 0x5F8 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA0			0x1F4 0x3E4 0x4A8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPUART7_TXD			0x1F4 0x3E4 0x55C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SAI1_TX_BLCK			0x1F4 0x3E4 0x5A8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPSPI2_SDO			0x1F4 0x3E4 0x508 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_GPIO3_IO08			0x1F4 0x3E4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SEMC_CSX2				0x1F4 0x3E4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_USDHC2_DATA5			0x1F8 0x3E8 0x5FC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA1			0x1F8 0x3E8 0x4AC 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPUART7_RXD			0x1F8 0x3E8 0x558 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_SAI1_TX_SYNC			0x1F8 0x3E8 0x5AC 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPSPI2_SDI			0x1F8 0x3E8 0x504 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_GPIO3_IO09			0x1F8 0x3E8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_USDHC2_DATA6			0x1FC 0x3EC 0x600 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA2			0x1FC 0x3EC 0x4B0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPUART2_RXD			0x1FC 0x3EC 0x52C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPI2C2_SDA			0x1FC 0x3EC 0x4D8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPSPI2_PCS2			0x1FC 0x3EC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_GPIO3_IO10			0x1FC 0x3EC 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_USDHC2_DATA7			0x200 0x3F0 0x604 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_DATA3			0x200 0x3F0 0x4B4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPUART2_TXD			0x200 0x3F0 0x530 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPI2C2_SCL			0x200 0x3F0 0x4D4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPSPI2_PCS3			0x200 0x3F0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_GPIO3_IO11			0x200 0x3F0 0x000 0x5 0x0
+
+#endif /* _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi b/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
new file mode 100644
index 0000000000000..dd714d235d5f6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include "../../armv7-m.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/imxrt1050-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	clocks {
+		osc: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+
+		osc3M: osc3M {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <3000000>;
+		};
+	};
+
+	soc {
+		lpuart1: serial@40184000 {
+			compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
+			reg = <0x40184000 0x4000>;
+			interrupts = <20>;
+			clocks = <&clks IMXRT1050_CLK_LPUART1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		iomuxc: pinctrl@401f8000 {
+			compatible = "fsl,imxrt1050-iomuxc";
+			reg = <0x401f8000 0x4000>;
+			fsl,mux_mask = <0x7>;
+		};
+
+		anatop: anatop@400d8000 {
+			compatible = "fsl,imxrt-anatop";
+			reg = <0x400d8000 0x4000>;
+		};
+
+		clks: clock-controller@400fc000 {
+			compatible = "fsl,imxrt1050-ccm";
+			reg = <0x400fc000 0x4000>;
+			interrupts = <95>, <96>;
+			clocks = <&osc>;
+			clock-names = "osc";
+			#clock-cells = <1>;
+			assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL1_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL2_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL3_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>,
+				<&clks IMXRT1050_CLK_PLL2_PFD2_396M>;
+			assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>,
+				<&clks IMXRT1050_CLK_PLL1_ARM>,
+				<&clks IMXRT1050_CLK_PLL2_SYS>,
+				<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+				<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+				<&clks IMXRT1050_CLK_PLL2_SYS>;
+		};
+
+		edma1: dma-controller@400e8000 {
+			#dma-cells = <2>;
+			compatible = "fsl,imx7ulp-edma";
+			reg = <0x400e8000 0x4000>,
+				<0x400ec000 0x4000>;
+			dma-channels = <32>;
+			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
+				<9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
+			clock-names = "dma", "dmamux0";
+			clocks = <&clks IMXRT1050_CLK_DMA>,
+				 <&clks IMXRT1050_CLK_DMA_MUX>;
+		};
+
+		usdhc1: mmc@402c0000 {
+			compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
+			reg = <0x402c0000 0x4000>;
+			interrupts = <110>;
+			clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
+				<&clks IMXRT1050_CLK_OSC>,
+				<&clks IMXRT1050_CLK_USDHC1>;
+			clock-names = "ipg", "ahb", "per";
+			bus-width = <4>;
+			fsl,wp-controller;
+			no-1-8-v;
+			max-frequency = <200000000>;
+			fsl,tuning-start-tap = <20>;
+			fsl,tuning-step = <2>;
+			status = "disabled";
+		};
+
+		gpio1: gpio@401b8000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401b8000 0x4000>;
+			interrupts = <80>, <81>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@401bc000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401bc000 0x4000>;
+			interrupts = <82>, <83>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@401c0000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401c0000 0x4000>;
+			interrupts = <84>, <85>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@401c4000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401c4000 0x4000>;
+			interrupts = <86>, <87>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@400c0000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x400c0000 0x4000>;
+			interrupts = <88>, <89>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpt: timer@401ec000 {
+			compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
+			reg = <0x401ec000 0x4000>;
+			interrupts = <100>;
+			clocks = <&osc3M>;
+			clock-names = "per";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imxrt1170-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imxrt1170-pinfunc.h
new file mode 100644
index 0000000000000..3b9fff2f08e19
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imxrt1170-pinfunc.h
@@ -0,0 +1,1561 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2021
+ * Author(s): Jesse Taube <Mr.Bossman075@gmail.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H
+#define _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H
+
+#define IMX_PAD_SION		0x40000000
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define IOMUXC_GPIO_LPSR_00_FLEXCAN3_TX				0x000 0x040 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_00_MIC_CLK				0x000 0x040 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_00_MQS_RIGHT				0x000 0x040 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_00_ARM_CM4_EVENTO			0x000 0x040 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_00_GPIO_MUX6_IO00			0x000 0x040 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_00_LPUART12_TXD			0x000 0x040 0x0B0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_00_SAI4_MCLK				0x000 0x040 0x0C8 0x7 0x0
+#define IOMUXC_GPIO_LPSR_00_GPIO12_IO00				0x000 0x040 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_01_FLEXCAN3_RX				0x004 0x044 0x080 0x0 0x0
+#define IOMUXC_GPIO_LPSR_01_MIC_BITSTREAM0			0x004 0x044 0x0B4 0x1 0x0
+#define IOMUXC_GPIO_LPSR_01_MQS_LEFT				0x004 0x044 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_01_ARM_CM4_EVENTI			0x004 0x044 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_01_GPIO_MUX6_IO01			0x004 0x044 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_01_LPUART12_RXD			0x004 0x044 0x0AC 0x6 0x0
+#define IOMUXC_GPIO_LPSR_01_GPIO12_IO01				0x004 0x044 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_02_GPIO12_IO02				0x008 0x048 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_02_SRC_BOOT_MODE00			0x008 0x048 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_02_LPSPI5_SCK				0x008 0x048 0x098 0x1 0x0
+#define IOMUXC_GPIO_LPSR_02_SAI4_TX_DATA			0x008 0x048 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_02_MQS_RIGHT				0x008 0x048 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_02_GPIO_MUX6_IO02			0x008 0x048 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_LPSR_03_SRC_BOOT_MODE01			0x00C 0x04C 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_03_LPSPI5_PCS0				0x00C 0x04C 0x094 0x1 0x0
+#define IOMUXC_GPIO_LPSR_03_SAI4_TX_SYNC			0x00C 0x04C 0x0DC 0x2 0x0
+#define IOMUXC_GPIO_LPSR_03_MQS_LEFT				0x00C 0x04C 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_03_GPIO_MUX6_IO03			0x00C 0x04C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_03_GPIO12_IO03				0x00C 0x04C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_04_LPI2C5_SDA				0x010 0x050 0x088 0x0 0x0
+#define IOMUXC_GPIO_LPSR_04_LPSPI5_SOUT				0x010 0x050 0x0A0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_04_SAI4_TX_BCLK			0x010 0x050 0x0D8 0x2 0x0
+#define IOMUXC_GPIO_LPSR_04_LPUART12_RTS_B			0x010 0x050 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_04_GPIO_MUX6_IO04			0x010 0x050 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_04_LPUART11_TXD			0x010 0x050 0x0A8 0x6 0x0
+#define IOMUXC_GPIO_LPSR_04_GPIO12_IO04				0x010 0x050 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_05_GPIO12_IO05				0x014 0x054 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_05_LPI2C5_SCL				0x014 0x054 0x084 0x0 0x0
+#define IOMUXC_GPIO_LPSR_05_LPSPI5_SIN				0x014 0x054 0x09C 0x1 0x0
+#define IOMUXC_GPIO_LPSR_05_SAI4_MCLK				0x014 0x054 0x0C8 0x2 0x1
+#define IOMUXC_GPIO_LPSR_05_LPUART12_CTS_B			0x014 0x054 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_05_GPIO_MUX6_IO05			0x014 0x054 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_05_LPUART11_RXD			0x014 0x054 0x0A4 0x6 0x0
+#define IOMUXC_GPIO_LPSR_05_NMI_GLUE_NMI			0x014 0x054 0x0C4 0x7 0x0
+
+#define IOMUXC_GPIO_LPSR_06_LPI2C6_SDA				0x018 0x058 0x090 0x0 0x0
+#define IOMUXC_GPIO_LPSR_06_SAI4_RX_DATA			0x018 0x058 0x0D0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_06_LPUART12_TXD			0x018 0x058 0x0B0 0x3 0x1
+#define IOMUXC_GPIO_LPSR_06_LPSPI6_PCS3				0x018 0x058 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_06_GPIO_MUX6_IO06			0x018 0x058 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_06_FLEXCAN3_TX				0x018 0x058 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_06_PIT2_TRIGGER3			0x018 0x058 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_06_LPSPI5_PCS1				0x018 0x058 0x0 0x8 0x0
+#define IOMUXC_GPIO_LPSR_06_GPIO12_IO06				0x018 0x058 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_07_LPI2C6_SCL				0x01C 0x05C 0x08C 0x0 0x0
+#define IOMUXC_GPIO_LPSR_07_SAI4_RX_BCLK			0x01C 0x05C 0x0CC 0x2 0x0
+#define IOMUXC_GPIO_LPSR_07_LPUART12_RXD			0x01C 0x05C 0x0AC 0x3 0x1
+#define IOMUXC_GPIO_LPSR_07_LPSPI6_PCS2				0x01C 0x05C 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_07_GPIO_MUX6_IO07			0x01C 0x05C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_07_FLEXCAN3_RX				0x01C 0x05C 0x080 0x6 0x1
+#define IOMUXC_GPIO_LPSR_07_PIT2_TRIGGER2			0x01C 0x05C 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_07_LPSPI5_PCS2				0x01C 0x05C 0x0 0x8 0x0
+#define IOMUXC_GPIO_LPSR_07_GPIO12_IO07				0x01C 0x05C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_08_GPIO12_IO08				0x020 0x060 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_08_LPUART11_TXD			0x020 0x060 0x0A8 0x0 0x1
+#define IOMUXC_GPIO_LPSR_08_FLEXCAN3_TX				0x020 0x060 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_08_SAI4_RX_SYNC			0x020 0x060 0x0D4 0x2 0x0
+#define IOMUXC_GPIO_LPSR_08_MIC_CLK				0x020 0x060 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_08_LPSPI6_PCS1				0x020 0x060 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_08_GPIO_MUX6_IO08			0x020 0x060 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_08_LPI2C5_SDA				0x020 0x060 0x088 0x6 0x1
+#define IOMUXC_GPIO_LPSR_08_PIT2_TRIGGER1			0x020 0x060 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_08_LPSPI5_PCS3				0x020 0x060 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_LPSR_09_GPIO12_IO09				0x024 0x064 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_09_LPUART11_RXD			0x024 0x064 0x0A4 0x0 0x1
+#define IOMUXC_GPIO_LPSR_09_FLEXCAN3_RX				0x024 0x064 0x080 0x1 0x2
+#define IOMUXC_GPIO_LPSR_09_PIT2_TRIGGER0			0x024 0x064 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_09_MIC_BITSTREAM0			0x024 0x064 0x0B4 0x3 0x1
+#define IOMUXC_GPIO_LPSR_09_LPSPI6_PCS0				0x024 0x064 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_09_GPIO_MUX6_IO09			0x024 0x064 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_09_LPI2C5_SCL				0x024 0x064 0x084 0x6 0x1
+#define IOMUXC_GPIO_LPSR_09_SAI4_TX_DATA			0x024 0x064 0x0 0x7 0x0
+
+#define IOMUXC_GPIO_LPSR_10_GPIO12_IO10				0x028 0x068 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_10_JTAG_MUX_TRSTB			0x028 0x068 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_10_LPUART11_CTS_B			0x028 0x068 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_10_LPI2C6_SDA				0x028 0x068 0x090 0x2 0x1
+#define IOMUXC_GPIO_LPSR_10_MIC_BITSTREAM1			0x028 0x068 0x0B8 0x3 0x0
+#define IOMUXC_GPIO_LPSR_10_LPSPI6_SCK				0x028 0x068 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_10_GPIO_MUX6_IO10			0x028 0x068 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_10_LPI2C5_SCLS				0x028 0x068 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_10_SAI4_TX_SYNC			0x028 0x068 0x0DC 0x7 0x1
+#define IOMUXC_GPIO_LPSR_10_LPUART12_TXD			0x028 0x068 0x0B0 0x8 0x2
+
+#define IOMUXC_GPIO_LPSR_11_JTAG_MUX_TDO			0x02C 0x06C 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_11_LPUART11_RTS_B			0x02C 0x06C 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_11_LPI2C6_SCL				0x02C 0x06C 0x08C 0x2 0x1
+#define IOMUXC_GPIO_LPSR_11_MIC_BITSTREAM2			0x02C 0x06C 0x0BC 0x3 0x0
+#define IOMUXC_GPIO_LPSR_11_LPSPI6_SOUT				0x02C 0x06C 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_11_GPIO_MUX6_IO11			0x02C 0x06C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_11_LPI2C5_SDAS				0x02C 0x06C 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_11_ARM_TRACE_SWO			0x02C 0x06C 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_11_LPUART12_RXD			0x02C 0x06C 0x0AC 0x8 0x2
+#define IOMUXC_GPIO_LPSR_11_GPIO12_IO11				0x02C 0x06C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_12_GPIO12_IO12				0x030 0x070 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_12_JTAG_MUX_TDI			0x030 0x070 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_12_PIT2_TRIGGER0			0x030 0x070 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_12_MIC_BITSTREAM3			0x030 0x070 0x0C0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_12_LPSPI6_SIN				0x030 0x070 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_12_GPIO_MUX6_IO12			0x030 0x070 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_12_LPI2C5_HREQ				0x030 0x070 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_12_SAI4_TX_BCLK			0x030 0x070 0x0D8 0x7 0x1
+#define IOMUXC_GPIO_LPSR_12_LPSPI5_SCK				0x030 0x070 0x098 0x8 0x1
+
+#define IOMUXC_GPIO_LPSR_13_GPIO12_IO13				0x034 0x074 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_13_JTAG_MUX_MOD			0x034 0x074 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_13_MIC_BITSTREAM1			0x034 0x074 0x0B8 0x1 0x1
+#define IOMUXC_GPIO_LPSR_13_PIT2_TRIGGER1			0x034 0x074 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_13_GPIO_MUX6_IO13			0x034 0x074 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_13_SAI4_RX_DATA			0x034 0x074 0x0D0 0x7 0x1
+#define IOMUXC_GPIO_LPSR_13_LPSPI5_PCS0				0x034 0x074 0x094 0x8 0x1
+
+#define IOMUXC_GPIO_LPSR_14_JTAG_MUX_TCK			0x038 0x078 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_14_MIC_BITSTREAM2			0x038 0x078 0x0BC 0x1 0x1
+#define IOMUXC_GPIO_LPSR_14_PIT2_TRIGGER2			0x038 0x078 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_14_GPIO_MUX6_IO14			0x038 0x078 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_14_SAI4_RX_BCLK			0x038 0x078 0x0CC 0x7 0x1
+#define IOMUXC_GPIO_LPSR_14_LPSPI5_SOUT				0x038 0x078 0x0A0 0x8 0x1
+#define IOMUXC_GPIO_LPSR_14_GPIO12_IO14				0x038 0x078 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_15_GPIO12_IO15				0x03C 0x07C 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_15_JTAG_MUX_TMS			0x03C 0x07C 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_15_MIC_BITSTREAM3			0x03C 0x07C 0x0C0 0x1 0x1
+#define IOMUXC_GPIO_LPSR_15_PIT2_TRIGGER3			0x03C 0x07C 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_15_GPIO_MUX6_IO15			0x03C 0x07C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_15_SAI4_RX_SYNC			0x03C 0x07C 0x0D4 0x7 0x1
+#define IOMUXC_GPIO_LPSR_15_LPSPI5_SIN				0x03C 0x07C 0x09C 0x8 0x1
+
+#define IOMUXC_WAKEUP_DIG_GPIO13_IO00				0x40C94000 0x40C94040 0x0 0x5 0x0
+#define IOMUXC_WAKEUP_DIG_NMI_GLUE_NMI				0x40C94000 0x40C94040 0x0C4 0x7 0x1
+
+#define IOMUXC_PMIC_ON_REQ_DIG_SNVS_LP_PMIC_ON_REQ		0x40C94004 0x40C94044 0x0 0x0 0x0
+#define IOMUXC_PMIC_ON_REQ_DIG_GPIO13_IO01			0x40C94004 0x40C94044 0x0 0x5 0x0
+
+#define IOMUXC_PMIC_STBY_REQ_DIG_CCM_PMIC_VSTBY_REQ		0x40C94008 0x40C94048 0x0 0x0 0x0
+#define IOMUXC_PMIC_STBY_REQ_DIG_GPIO13_IO02			0x40C94008 0x40C94048 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_00_DIG_SNVS_TAMPER0			0x40C9400C 0x40C9404C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_00_DIG_GPIO13_IO03			0x40C9400C 0x40C9404C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_01_DIG_SNVS_TAMPER1			0x40C94010 0x40C94050 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_01_DIG_GPIO13_IO04			0x40C94010 0x40C94050 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_02_DIG_SNVS_TAMPER2			0x40C94014 0x40C94054 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_02_DIG_GPIO13_IO05			0x40C94014 0x40C94054 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_03_DIG_SNVS_TAMPER3			0x40C94018 0x40C94058 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_03_DIG_GPIO13_IO06			0x40C94018 0x40C94058 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_04_DIG_SNVS_TAMPER4			0x40C9401C 0x40C9405C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_04_DIG_GPIO13_IO07			0x40C9401C 0x40C9405C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_05_DIG_SNVS_TAMPER5			0x40C94020 0x40C94060 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_05_DIG_GPIO13_IO08			0x40C94020 0x40C94060 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_06_DIG_SNVS_TAMPER6			0x40C94024 0x40C94064 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_06_DIG_GPIO13_IO09			0x40C94024 0x40C94064 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_07_DIG_SNVS_TAMPER7			0x40C94028 0x40C94068 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_07_DIG_GPIO13_IO10			0x40C94028 0x40C94068 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_08_DIG_SNVS_TAMPER8			0x40C9402C 0x40C9406C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_08_DIG_GPIO13_IO11			0x40C9402C 0x40C9406C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_09_DIG_SNVS_TAMPER9			0x40C94030 0x40C94070 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_09_DIG_GPIO13_IO12			0x40C94030 0x40C94070 0x0 0x5 0x0
+
+#define IOMUXC_TEST_MODE_DIG					0x0 0x40C94034 0x0 0x0 0x0
+
+#define IOMUXC_POR_B_DIG					0x0 0x40C94038 0x0 0x0 0x0
+
+#define IOMUXC_ONOFF_DIG					0x0 0x40C9403C 0x0 0x0 0x0
+
+#define IOMUXC_GPIO_EMC_B1_00_SEMC_DATA00			0x010 0x254 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_00_FLEXPWM4_PWM0_A			0x010 0x254 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_00_GPIO_MUX1_IO00			0x010 0x254 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_00_FLEXIO1_D00			0x010 0x254 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_00_GPIO7_IO00			0x010 0x254 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_01_GPIO7_IO01			0x014 0x258 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_01_SEMC_DATA01			0x014 0x258 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_01_FLEXPWM4_PWM0_B			0x014 0x258 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_01_GPIO_MUX1_IO01			0x014 0x258 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_01_FLEXIO1_D01			0x014 0x258 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_02_SEMC_DATA02			0x018 0x25C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_02_FLEXPWM4_PWM1_A			0x018 0x25C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_02_GPIO_MUX1_IO02			0x018 0x25C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_02_FLEXIO1_D02			0x018 0x25C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_02_GPIO7_IO02			0x018 0x25C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_03_SEMC_DATA03			0x01C 0x260 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_03_FLEXPWM4_PWM1_B			0x01C 0x260 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_03_GPIO_MUX1_IO03			0x01C 0x260 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_03_FLEXIO1_D03			0x01C 0x260 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_03_GPIO7_IO03			0x01C 0x260 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_04_GPIO7_IO04			0x020 0x264 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_04_SEMC_DATA04			0x020 0x264 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_04_FLEXPWM4_PWM2_A			0x020 0x264 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_04_GPIO_MUX1_IO04			0x020 0x264 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_04_FLEXIO1_D04			0x020 0x264 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_05_SEMC_DATA05			0x024 0x268 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_05_FLEXPWM4_PWM2_B			0x024 0x268 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_05_GPIO_MUX1_IO05			0x024 0x268 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_05_FLEXIO1_D05			0x024 0x268 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_05_GPIO7_IO05			0x024 0x268 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_06_SEMC_DATA06			0x028 0x26C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_06_FLEXPWM2_PWM0_A			0x028 0x26C 0x518 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_06_GPIO_MUX1_IO06			0x028 0x26C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_06_FLEXIO1_D06			0x028 0x26C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_06_GPIO7_IO06			0x028 0x26C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_07_GPIO7_IO07			0x02C 0x270 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_07_SEMC_DATA07			0x02C 0x270 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_07_FLEXPWM2_PWM0_B			0x02C 0x270 0x524 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_07_GPIO_MUX1_IO07			0x02C 0x270 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_07_FLEXIO1_D07			0x02C 0x270 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_08_SEMC_DM00				0x030 0x274 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_08_FLEXPWM2_PWM1_A			0x030 0x274 0x51C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_08_GPIO_MUX1_IO08			0x030 0x274 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_08_FLEXIO1_D08			0x030 0x274 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_08_GPIO7_IO08			0x030 0x274 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_09_SEMC_ADDR00			0x034 0x278 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_09_FLEXPWM2_PWM1_B			0x034 0x278 0x528 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_09_GPT5_CAPTURE1			0x034 0x278 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_09_GPIO_MUX1_IO09			0x034 0x278 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_09_FLEXIO1_D09			0x034 0x278 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_09_GPIO7_IO09			0x034 0x278 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_10_SEMC_ADDR01			0x038 0x27C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_10_FLEXPWM2_PWM2_A			0x038 0x27C 0x520 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_10_GPT5_CAPTURE2			0x038 0x27C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_10_GPIO_MUX1_IO10			0x038 0x27C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_10_FLEXIO1_D10			0x038 0x27C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_10_GPIO7_IO10			0x038 0x27C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_11_GPIO7_IO11			0x03C 0x280 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_11_SEMC_ADDR02			0x03C 0x280 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_11_FLEXPWM2_PWM2_B			0x03C 0x280 0x52C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_11_GPT5_COMPARE1			0x03C 0x280 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_11_GPIO_MUX1_IO11			0x03C 0x280 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_11_FLEXIO1_D11			0x03C 0x280 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_12_SEMC_ADDR03			0x040 0x284 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_12_XBAR1_INOUT04			0x040 0x284 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_12_GPT5_COMPARE2			0x040 0x284 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_12_GPIO_MUX1_IO12			0x040 0x284 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_12_FLEXIO1_D12			0x040 0x284 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_12_GPIO7_IO12			0x040 0x284 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_13_SEMC_ADDR04			0x044 0x288 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_13_XBAR1_INOUT05			0x044 0x288 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_13_GPT5_COMPARE3			0x044 0x288 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_13_GPIO_MUX1_IO13			0x044 0x288 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_13_FLEXIO1_D13			0x044 0x288 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_13_GPIO7_IO13			0x044 0x288 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_14_GPIO7_IO14			0x048 0x28C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_14_SEMC_ADDR05			0x048 0x28C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_14_XBAR1_INOUT06			0x048 0x28C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_14_GPT5_CLK				0x048 0x28C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_14_GPIO_MUX1_IO14			0x048 0x28C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_14_FLEXIO1_D14			0x048 0x28C 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_15_SEMC_ADDR06			0x04C 0x290 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_15_XBAR1_INOUT07			0x04C 0x290 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_15_GPIO_MUX1_IO15			0x04C 0x290 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_15_FLEXIO1_D15			0x04C 0x290 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_15_GPIO7_IO15			0x04C 0x290 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_16_SEMC_ADDR07			0x050 0x294 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_16_XBAR1_INOUT08			0x050 0x294 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_16_GPIO_MUX1_IO16			0x050 0x294 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_16_FLEXIO1_D16			0x050 0x294 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_16_GPIO7_IO16			0x050 0x294 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_17_GPIO7_IO17			0x054 0x298 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_17_SEMC_ADDR08			0x054 0x298 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_17_FLEXPWM4_PWM3_A			0x054 0x298 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_17_TMR1_TIMER0			0x054 0x298 0x63C 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_17_GPIO_MUX1_IO17			0x054 0x298 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_17_FLEXIO1_D17			0x054 0x298 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_18_SEMC_ADDR09			0x058 0x29C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_18_FLEXPWM4_PWM3_B			0x058 0x29C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_18_TMR2_TIMER0			0x058 0x29C 0x648 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_18_GPIO_MUX1_IO18			0x058 0x29C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_18_FLEXIO1_D18			0x058 0x29C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_18_GPIO7_IO18			0x058 0x29C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_19_SEMC_ADDR11			0x05C 0x2A0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_19_FLEXPWM2_PWM3_A			0x05C 0x2A0 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_19_TMR3_TIMER0			0x05C 0x2A0 0x654 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_19_GPIO_MUX1_IO19			0x05C 0x2A0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_19_FLEXIO1_D19			0x05C 0x2A0 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_19_GPIO7_IO19			0x05C 0x2A0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_20_SEMC_ADDR12			0x060 0x2A4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_20_FLEXPWM2_PWM3_B			0x060 0x2A4 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_20_TMR4_TIMER0			0x060 0x2A4 0x660 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_20_GPIO_MUX1_IO20			0x060 0x2A4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_20_FLEXIO1_D20			0x060 0x2A4 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_20_GPIO7_IO20			0x060 0x2A4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_21_GPIO7_IO21			0x064 0x2A8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_21_SEMC_BA0				0x064 0x2A8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_21_FLEXPWM3_PWM3_A			0x064 0x2A8 0x53C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_21_GPIO_MUX1_IO21			0x064 0x2A8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_21_FLEXIO1_D21			0x064 0x2A8 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_22_GPIO7_IO22			0x068 0x2AC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_22_SEMC_BA1				0x068 0x2AC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_22_FLEXPWM3_PWM3_B			0x068 0x2AC 0x54C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_22_GPIO_MUX1_IO22			0x068 0x2AC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_22_FLEXIO1_D22			0x068 0x2AC 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_23_SEMC_ADDR10			0x06C 0x2B0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_23_FLEXPWM1_PWM0_A			0x06C 0x2B0 0x500 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_23_GPIO_MUX1_IO23			0x06C 0x2B0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_23_FLEXIO1_D23			0x06C 0x2B0 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_23_GPIO7_IO23			0x06C 0x2B0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_24_GPIO7_IO24			0x070 0x2B4 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_24_SEMC_CAS				0x070 0x2B4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_24_FLEXPWM1_PWM0_B			0x070 0x2B4 0x50C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_24_GPIO_MUX1_IO24			0x070 0x2B4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_24_FLEXIO1_D24			0x070 0x2B4 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_25_GPIO7_IO25			0x074 0x2B8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_25_SEMC_RAS				0x074 0x2B8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_25_FLEXPWM1_PWM1_A			0x074 0x2B8 0x504 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_25_GPIO_MUX1_IO25			0x074 0x2B8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_25_FLEXIO1_D25			0x074 0x2B8 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_26_SEMC_CLK				0x078 0x2BC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_26_FLEXPWM1_PWM1_B			0x078 0x2BC 0x510 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_26_GPIO_MUX1_IO26			0x078 0x2BC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_26_FLEXIO1_D26			0x078 0x2BC 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_26_GPIO7_IO26			0x078 0x2BC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_27_GPIO7_IO27			0x07C 0x2C0 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_27_SEMC_CKE				0x07C 0x2C0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_27_FLEXPWM1_PWM2_A			0x07C 0x2C0 0x508 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_27_GPIO_MUX1_IO27			0x07C 0x2C0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_27_FLEXIO1_D27			0x07C 0x2C0 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_28_GPIO7_IO28			0x080 0x2C4 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_28_SEMC_WE				0x080 0x2C4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_28_FLEXPWM1_PWM2_B			0x080 0x2C4 0x514 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_28_GPIO_MUX1_IO28			0x080 0x2C4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_28_FLEXIO1_D28			0x080 0x2C4 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_29_SEMC_CS0				0x084 0x2C8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_29_FLEXPWM3_PWM0_A			0x084 0x2C8 0x530 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_29_GPIO_MUX1_IO29			0x084 0x2C8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_29_FLEXIO1_D29			0x084 0x2C8 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_29_GPIO7_IO29			0x084 0x2C8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_30_SEMC_DATA08			0x088 0x2CC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_30_FLEXPWM3_PWM0_B			0x088 0x2CC 0x540 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_30_GPIO_MUX1_IO30			0x088 0x2CC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_30_FLEXIO1_D30			0x088 0x2CC 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_30_GPIO7_IO30			0x088 0x2CC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_31_GPIO7_IO31			0x08C 0x2D0 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_31_SEMC_DATA09			0x08C 0x2D0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_31_FLEXPWM3_PWM1_A			0x08C 0x2D0 0x534 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_31_GPIO_MUX1_IO31			0x08C 0x2D0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_31_FLEXIO1_D31			0x08C 0x2D0 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_32_GPIO8_IO00			0x090 0x2D4 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_32_SEMC_DATA10			0x090 0x2D4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_32_FLEXPWM3_PWM1_B			0x090 0x2D4 0x544 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_32_GPIO_MUX2_IO00			0x090 0x2D4 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_33_SEMC_DATA11			0x094 0x2D8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_33_FLEXPWM3_PWM2_A			0x094 0x2D8 0x538 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_33_GPIO_MUX2_IO01			0x094 0x2D8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_33_GPIO8_IO01			0x094 0x2D8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_34_GPIO8_IO02			0x098 0x2DC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_34_SEMC_DATA12			0x098 0x2DC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_34_FLEXPWM3_PWM2_B			0x098 0x2DC 0x548 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_34_GPIO_MUX2_IO02			0x098 0x2DC 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_35_GPIO8_IO03			0x09C 0x2E0 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_35_SEMC_DATA13			0x09C 0x2E0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_35_XBAR1_INOUT09			0x09C 0x2E0 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_35_GPIO_MUX2_IO03			0x09C 0x2E0 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_36_SEMC_DATA14			0x0A0 0x2E4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_36_XBAR1_INOUT10			0x0A0 0x2E4 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_36_GPIO_MUX2_IO04			0x0A0 0x2E4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_36_GPIO8_IO04			0x0A0 0x2E4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_37_GPIO8_IO05			0x0A4 0x2E8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_37_SEMC_DATA15			0x0A4 0x2E8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_37_XBAR1_INOUT11			0x0A4 0x2E8 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_37_GPIO_MUX2_IO05			0x0A4 0x2E8 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_38_GPIO8_IO06			0x0A8 0x2EC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_38_SEMC_DM01				0x0A8 0x2EC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_38_FLEXPWM1_PWM3_A			0x0A8 0x2EC 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_38_TMR1_TIMER1			0x0A8 0x2EC 0x640 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_38_GPIO_MUX2_IO06			0x0A8 0x2EC 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_39_SEMC_DQS				0x0AC 0x2F0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_39_FLEXPWM1_PWM3_B			0x0AC 0x2F0 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_39_TMR2_TIMER1			0x0AC 0x2F0 0x64C 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_39_GPIO_MUX2_IO07			0x0AC 0x2F0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_39_GPIO8_IO07			0x0AC 0x2F0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_40_SEMC_RDY				0x0B0 0x2F4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_40_XBAR1_INOUT12			0x0B0 0x2F4 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_40_MQS_RIGHT				0x0B0 0x2F4 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_40_LPUART6_TXD			0x0B0 0x2F4 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B1_40_GPIO_MUX2_IO08			0x0B0 0x2F4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_40_ENET_1G_MDC			0x0B0 0x2F4 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B1_40_CCM_CLKO1				0x0B0 0x2F4 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B1_40_GPIO8_IO08			0x0B0 0x2F4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_41_GPIO8_IO09			0x0B4 0x2F8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_41_SEMC_CSX00			0x0B4 0x2F8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_41_XBAR1_INOUT13			0x0B4 0x2F8 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_41_MQS_LEFT				0x0B4 0x2F8 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_41_LPUART6_RXD			0x0B4 0x2F8 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B1_41_FLEXSPI2_B_DATA07			0x0B4 0x2F8 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B1_41_GPIO_MUX2_IO09			0x0B4 0x2F8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_41_ENET_1G_MDIO			0x0B4 0x2F8 0x4C8 0x7 0x0
+#define IOMUXC_GPIO_EMC_B1_41_CCM_CLKO2				0x0B4 0x2F8 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_00_SEMC_DATA16			0x0B8 0x2FC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_00_CCM_ENET_REF_CLK_25M		0x0B8 0x2FC 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_00_TMR3_TIMER1			0x0B8 0x2FC 0x658 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_00_LPUART6_CTS_B			0x0B8 0x2FC 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_00_FLEXSPI2_B_DATA06			0x0B8 0x2FC 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_00_GPIO_MUX2_IO10			0x0B8 0x2FC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_00_XBAR1_INOUT20			0x0B8 0x2FC 0x6D8 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_00_ENET_QOS_1588_EVENT1_OUT		0x0B8 0x2FC 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_00_LPSPI1_SCK			0x0B8 0x2FC 0x5D0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_00_LPI2C2_SCL			0x0B8 0x2FC 0x5B4 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_00_GPIO8_IO10			0x0B8 0x2FC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_00_FLEXPWM3_PWM0_A			0x0B8 0x2FC 0x530 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_01_SEMC_DATA17			0x0BC 0x300 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_01_USDHC2_CD_B			0x0BC 0x300 0x6D0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_01_TMR4_TIMER1			0x0BC 0x300 0x664 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_01_LPUART6_RTS_B			0x0BC 0x300 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_01_FLEXSPI2_B_DATA05			0x0BC 0x300 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_01_GPIO_MUX2_IO11			0x0BC 0x300 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_01_XBAR1_INOUT21			0x0BC 0x300 0x6DC 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_01_ENET_QOS_1588_EVENT1_IN		0x0BC 0x300 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_01_LPSPI1_PCS0			0x0BC 0x300 0x5CC 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_01_LPI2C2_SDA			0x0BC 0x300 0x5B8 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_01_GPIO8_IO11			0x0BC 0x300 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_01_FLEXPWM3_PWM0_B			0x0BC 0x300 0x540 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_02_SEMC_DATA18			0x0C0 0x304 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_02_USDHC2_WP				0x0C0 0x304 0x6D4 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_02_VIDEO_MUX_CSI_DATA23		0x0C0 0x304 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_02_FLEXSPI2_B_DATA04			0x0C0 0x304 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_02_GPIO_MUX2_IO12			0x0C0 0x304 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_02_XBAR1_INOUT22			0x0C0 0x304 0x6E0 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_02_ENET_QOS_1588_EVENT1_AUX_IN	0x0C0 0x304 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_02_LPSPI1_SOUT			0x0C0 0x304 0x5D8 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_02_GPIO8_IO12			0x0C0 0x304 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_02_FLEXPWM3_PWM1_A			0x0C0 0x304 0x534 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_03_SEMC_DATA19			0x0C4 0x308 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_03_USDHC2_VSELECT			0x0C4 0x308 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_03_VIDEO_MUX_CSI_DATA22		0x0C4 0x308 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_03_FLEXSPI2_B_DATA03			0x0C4 0x308 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_03_GPIO_MUX2_IO13			0x0C4 0x308 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_03_XBAR1_INOUT23			0x0C4 0x308 0x6E4 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_03_ENET_1G_TX_DATA03			0x0C4 0x308 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_03_LPSPI1_SIN			0x0C4 0x308 0x5D4 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_03_GPIO8_IO13			0x0C4 0x308 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_03_FLEXPWM3_PWM1_B			0x0C4 0x308 0x544 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_04_SEMC_DATA20			0x0C8 0x30C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_04_USDHC2_RESET_B			0x0C8 0x30C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_04_SAI2_MCLK				0x0C8 0x30C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_04_VIDEO_MUX_CSI_DATA21		0x0C8 0x30C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_04_FLEXSPI2_B_DATA02			0x0C8 0x30C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_04_GPIO_MUX2_IO14			0x0C8 0x30C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_04_XBAR1_INOUT24			0x0C8 0x30C 0x6E8 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_04_ENET_1G_TX_DATA02			0x0C8 0x30C 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_04_LPSPI3_SCK			0x0C8 0x30C 0x600 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_04_GPIO8_IO14			0x0C8 0x30C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_04_FLEXPWM3_PWM2_A			0x0C8 0x30C 0x538 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_05_SEMC_DATA21			0x0CC 0x310 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_05_GPT3_CLK				0x0CC 0x310 0x598 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_05_SAI2_RX_SYNC			0x0CC 0x310 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_05_VIDEO_MUX_CSI_DATA20		0x0CC 0x310 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_05_FLEXSPI2_B_DATA01			0x0CC 0x310 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_05_GPIO_MUX2_IO15			0x0CC 0x310 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_05_XBAR1_INOUT25			0x0CC 0x310 0x6EC 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_05_ENET_1G_RX_CLK			0x0CC 0x310 0x4CC 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_05_LPSPI3_PCS0			0x0CC 0x310 0x5F0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_05_PIT1_TRIGGER0			0x0CC 0x310 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_05_GPIO8_IO15			0x0CC 0x310 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_05_FLEXPWM3_PWM2_B			0x0CC 0x310 0x548 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_06_SEMC_DATA22			0x0D0 0x314 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_06_GPT3_CAPTURE1			0x0D0 0x314 0x590 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_06_GPIO8_IO16			0x0D0 0x314 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_06_SAI2_RX_BCLK			0x0D0 0x314 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_06_FLEXPWM3_PWM3_A			0x0D0 0x314 0x53C 0xB 0x1
+#define IOMUXC_GPIO_EMC_B2_06_VIDEO_MUX_CSI_DATA19		0x0D0 0x314 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_06_FLEXSPI2_B_DATA00			0x0D0 0x314 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_06_GPIO_MUX2_IO16			0x0D0 0x314 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_06_XBAR1_INOUT26			0x0D0 0x314 0x6F0 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_06_ENET_1G_TX_ER			0x0D0 0x314 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_06_LPSPI3_SOUT			0x0D0 0x314 0x608 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_06_PIT1_TRIGGER1			0x0D0 0x314 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_07_SEMC_DATA23			0x0D4 0x318 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_07_GPT3_CAPTURE2			0x0D4 0x318 0x594 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_07_SAI2_RX_DATA			0x0D4 0x318 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_07_VIDEO_MUX_CSI_DATA18		0x0D4 0x318 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_07_FLEXSPI2_B_DQS			0x0D4 0x318 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_07_GPIO_MUX2_IO17			0x0D4 0x318 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_07_XBAR1_INOUT27			0x0D4 0x318 0x6F4 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_07_ENET_1G_RX_DATA03			0x0D4 0x318 0x4DC 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_07_LPSPI3_SIN			0x0D4 0x318 0x604 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_07_PIT1_TRIGGER2			0x0D4 0x318 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_07_GPIO8_IO17			0x0D4 0x318 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_07_FLEXPWM3_PWM3_B			0x0D4 0x318 0x54C 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_08_SEMC_DM02				0x0D8 0x31C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_08_GPT3_COMPARE1			0x0D8 0x31C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_08_SAI2_TX_DATA			0x0D8 0x31C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_08_VIDEO_MUX_CSI_DATA17		0x0D8 0x31C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_08_FLEXSPI2_B_SS0_B			0x0D8 0x31C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_08_GPIO_MUX2_IO18			0x0D8 0x31C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_08_XBAR1_INOUT28			0x0D8 0x31C 0x6F8 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_08_ENET_1G_RX_DATA02			0x0D8 0x31C 0x4D8 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_08_LPSPI3_PCS1			0x0D8 0x31C 0x5F4 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_08_PIT1_TRIGGER3			0x0D8 0x31C 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_08_GPIO8_IO18			0x0D8 0x31C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_09_GPIO8_IO19			0x0DC 0x320 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_09_SEMC_DATA24			0x0DC 0x320 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_09_GPT3_COMPARE2			0x0DC 0x320 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_09_SAI2_TX_BCLK			0x0DC 0x320 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_09_VIDEO_MUX_CSI_DATA16		0x0DC 0x320 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_09_FLEXSPI2_B_SCLK			0x0DC 0x320 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_09_GPIO_MUX2_IO19			0x0DC 0x320 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_09_XBAR1_INOUT29			0x0DC 0x320 0x6FC 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_09_ENET_1G_CRS			0x0DC 0x320 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_09_LPSPI3_PCS2			0x0DC 0x320 0x5F8 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_09_TMR1_TIMER0			0x0DC 0x320 0x63C 0x9 0x1
+
+#define IOMUXC_GPIO_EMC_B2_10_GPIO8_IO20			0x0E0 0x324 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_10_SEMC_DATA25			0x0E0 0x324 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_10_GPT3_COMPARE3			0x0E0 0x324 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_10_SAI2_TX_SYNC			0x0E0 0x324 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_10_VIDEO_MUX_CSI_FIELD		0x0E0 0x324 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_10_FLEXSPI2_A_SCLK			0x0E0 0x324 0x58C 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_10_GPIO_MUX2_IO20			0x0E0 0x324 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_10_XBAR1_INOUT30			0x0E0 0x324 0x700 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_10_ENET_1G_COL			0x0E0 0x324 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_10_LPSPI3_PCS3			0x0E0 0x324 0x5FC 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_10_TMR1_TIMER1			0x0E0 0x324 0x640 0x9 0x1
+
+#define IOMUXC_GPIO_EMC_B2_11_SEMC_DATA26			0x0E4 0x328 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_11_SPDIF_IN				0x0E4 0x328 0x6B4 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_11_ENET_1G_TX_DATA00			0x0E4 0x328 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_11_SAI3_RX_SYNC			0x0E4 0x328 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_11_FLEXSPI2_A_SS0_B			0x0E4 0x328 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_11_GPIO_MUX2_IO21			0x0E4 0x328 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_11_XBAR1_INOUT31			0x0E4 0x328 0x704 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_11_EMVSIM1_IO			0x0E4 0x328 0x69C 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_11_TMR1_TIMER2			0x0E4 0x328 0x644 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_11_GPIO8_IO21			0x0E4 0x328 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_12_SEMC_DATA27			0x0E8 0x32C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_12_SPDIF_OUT				0x0E8 0x32C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_12_ENET_1G_TX_DATA01			0x0E8 0x32C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_12_SAI3_RX_BCLK			0x0E8 0x32C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_12_FLEXSPI2_A_DQS			0x0E8 0x32C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_12_GPIO_MUX2_IO22			0x0E8 0x32C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_12_XBAR1_INOUT32			0x0E8 0x32C 0x708 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_12_EMVSIM1_CLK			0x0E8 0x32C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_12_TMR1_TIMER3			0x0E8 0x32C 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_12_GPIO8_IO22			0x0E8 0x32C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_13_GPIO8_IO23			0x0EC 0x330 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_13_SEMC_DATA28			0x0EC 0x330 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_13_ENET_1G_TX_EN			0x0EC 0x330 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_13_SAI3_RX_DATA			0x0EC 0x330 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_13_FLEXSPI2_A_DATA00			0x0EC 0x330 0x57C 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_13_GPIO_MUX2_IO23			0x0EC 0x330 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_13_XBAR1_INOUT33			0x0EC 0x330 0x70C 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_13_EMVSIM1_RST			0x0EC 0x330 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_13_TMR2_TIMER0			0x0EC 0x330 0x648 0x9 0x1
+
+#define IOMUXC_GPIO_EMC_B2_14_SEMC_DATA29			0x0F0 0x334 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_14_ENET_1G_TX_CLK_IO			0x0F0 0x334 0x4E8 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_14_SAI3_TX_DATA			0x0F0 0x334 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_14_FLEXSPI2_A_DATA01			0x0F0 0x334 0x580 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_14_GPIO_MUX2_IO24			0x0F0 0x334 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_14_XBAR1_INOUT34			0x0F0 0x334 0x710 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_14_SFA_ipp_do_atx_clk_under_test	0x0F0 0x334 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_14_EMVSIM1_SVEN			0x0F0 0x334 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_14_TMR2_TIMER1			0x0F0 0x334 0x64C 0x9 0x1
+#define IOMUXC_GPIO_EMC_B2_14_GPIO8_IO24			0x0F0 0x334 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_15_SEMC_DATA30			0x0F4 0x338 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_15_ENET_1G_RX_DATA00			0x0F4 0x338 0x4D0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_15_SAI3_TX_BCLK			0x0F4 0x338 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_15_FLEXSPI2_A_DATA02			0x0F4 0x338 0x584 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_15_GPIO_MUX2_IO25			0x0F4 0x338 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_15_XBAR1_INOUT35			0x0F4 0x338 0x714 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_15_EMVSIM1_PD			0x0F4 0x338 0x6A0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_15_TMR2_TIMER2			0x0F4 0x338 0x650 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_15_GPIO8_IO25			0x0F4 0x338 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_16_GPIO8_IO26			0x0F8 0x33C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_16_SEMC_DATA31			0x0F8 0x33C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_16_XBAR1_INOUT14			0x0F8 0x33C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_16_ENET_1G_RX_DATA01			0x0F8 0x33C 0x4D4 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_16_SAI3_TX_SYNC			0x0F8 0x33C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_16_FLEXSPI2_A_DATA03			0x0F8 0x33C 0x588 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_16_GPIO_MUX2_IO26			0x0F8 0x33C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_16_EMVSIM1_POWER_FAIL		0x0F8 0x33C 0x6A4 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_16_TMR2_TIMER3			0x0F8 0x33C 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_17_SEMC_DM03				0x0FC 0x340 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_17_XBAR1_INOUT15			0x0FC 0x340 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_17_ENET_1G_RX_EN			0x0FC 0x340 0x4E0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_17_SAI3_MCLK				0x0FC 0x340 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_17_FLEXSPI2_A_DATA04			0x0FC 0x340 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_17_GPIO_MUX2_IO27			0x0FC 0x340 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_17_WDOG1_ANY				0x0FC 0x340 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_17_TMR3_TIMER0			0x0FC 0x340 0x654 0x9 0x1
+#define IOMUXC_GPIO_EMC_B2_17_GPIO8_IO27			0x0FC 0x340 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_18_SEMC_DQS4				0x100 0x344 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_18_XBAR1_INOUT16			0x100 0x344 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_18_ENET_1G_RX_ER			0x100 0x344 0x4E4 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_18_EWM_OUT_B				0x100 0x344 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_18_FLEXSPI2_A_DATA05			0x100 0x344 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_18_GPIO_MUX2_IO28			0x100 0x344 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_18_FLEXSPI1_A_DQS			0x100 0x344 0x550 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_18_WDOG1_B				0x100 0x344 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_18_TMR3_TIMER1			0x100 0x344 0x658 0x9 0x1
+#define IOMUXC_GPIO_EMC_B2_18_GPIO8_IO28			0x100 0x344 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_19_GPIO8_IO29			0x104 0x348 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_19_SEMC_CLKX00			0x104 0x348 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_MDC				0x104 0x348 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_1G_MDC			0x104 0x348 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_1G_REF_CLK			0x104 0x348 0x4C4 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_19_FLEXSPI2_A_DATA06			0x104 0x348 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_19_GPIO_MUX2_IO29			0x104 0x348 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_QOS_MDC			0x104 0x348 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_19_TMR3_TIMER2			0x104 0x348 0x65C 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_20_GPIO8_IO30			0x108 0x34C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_20_SEMC_CLKX01			0x108 0x34C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_20_ENET_MDIO				0x108 0x34C 0x4AC 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_20_ENET_1G_MDIO			0x108 0x34C 0x4C8 0x2 0x1
+#define IOMUXC_GPIO_EMC_B2_20_ENET_QOS_REF_CLK			0x108 0x34C 0x4A0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_20_FLEXSPI2_A_DATA07			0x108 0x34C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_20_GPIO_MUX2_IO30			0x108 0x34C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_20_ENET_QOS_MDIO			0x108 0x34C 0x4EC 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_20_TMR3_TIMER3			0x108 0x34C 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_00_GPIO8_IO31				0x10C 0x350 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_00_EMVSIM1_IO				0x10C 0x350 0x69C 0x0 0x1
+#define IOMUXC_GPIO_AD_00_FLEXCAN2_TX				0x10C 0x350 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_00_ENET_1G_1588_EVENT1_IN		0x10C 0x350 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_00_GPT2_CAPTURE1				0x10C 0x350 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_00_FLEXPWM1_PWM0_A			0x10C 0x350 0x500 0x4 0x1
+#define IOMUXC_GPIO_AD_00_GPIO_MUX2_IO31			0x10C 0x350 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_00_LPUART7_TXD				0x10C 0x350 0x630 0x6 0x0
+#define IOMUXC_GPIO_AD_00_FLEXIO2_D00				0x10C 0x350 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_00_FLEXSPI2_B_SS1_B			0x10C 0x350 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_01_GPIO9_IO00				0x110 0x354 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_01_EMVSIM1_CLK				0x110 0x354 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_01_FLEXCAN2_RX				0x110 0x354 0x49C 0x1 0x0
+#define IOMUXC_GPIO_AD_01_ENET_1G_1588_EVENT1_OUT		0x110 0x354 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_01_GPT2_CAPTURE2				0x110 0x354 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_01_FLEXPWM1_PWM0_B			0x110 0x354 0x50C 0x4 0x1
+#define IOMUXC_GPIO_AD_01_GPIO_MUX3_IO00			0x110 0x354 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_01_LPUART7_RXD				0x110 0x354 0x62C 0x6 0x0
+#define IOMUXC_GPIO_AD_01_FLEXIO2_D01				0x110 0x354 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_01_FLEXSPI2_A_SS1_B			0x110 0x354 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_02_GPIO9_IO01				0x114 0x358 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_02_EMVSIM1_RST				0x114 0x358 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_02_LPUART7_CTS_B				0x114 0x358 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_02_ENET_1G_1588_EVENT2_IN		0x114 0x358 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_02_GPT2_COMPARE1				0x114 0x358 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_02_FLEXPWM1_PWM1_A			0x114 0x358 0x504 0x4 0x1
+#define IOMUXC_GPIO_AD_02_GPIO_MUX3_IO01			0x114 0x358 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_02_LPUART8_TXD				0x114 0x358 0x638 0x6 0x0
+#define IOMUXC_GPIO_AD_02_FLEXIO2_D02				0x114 0x358 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_02_VIDEO_MUX_EXT_DCIC1			0x114 0x358 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_03_GPIO9_IO02				0x118 0x35C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_03_EMVSIM1_SVEN				0x118 0x35C 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_03_LPUART7_RTS_B				0x118 0x35C 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_03_ENET_1G_1588_EVENT2_OUT		0x118 0x35C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_03_GPT2_COMPARE2				0x118 0x35C 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_03_FLEXPWM1_PWM1_B			0x118 0x35C 0x510 0x4 0x1
+#define IOMUXC_GPIO_AD_03_GPIO_MUX3_IO02			0x118 0x35C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_03_LPUART8_RXD				0x118 0x35C 0x634 0x6 0x0
+#define IOMUXC_GPIO_AD_03_FLEXIO2_D03				0x118 0x35C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_03_VIDEO_MUX_EXT_DCIC2			0x118 0x35C 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_04_EMVSIM1_PD				0x11C 0x360 0x6A0 0x0 0x1
+#define IOMUXC_GPIO_AD_04_LPUART8_CTS_B				0x11C 0x360 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_04_ENET_1G_1588_EVENT3_IN		0x11C 0x360 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_04_GPT2_COMPARE3				0x11C 0x360 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_04_FLEXPWM1_PWM2_A			0x11C 0x360 0x508 0x4 0x1
+#define IOMUXC_GPIO_AD_04_GPIO_MUX3_IO03			0x11C 0x360 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_04_WDOG1_B				0x11C 0x360 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_04_FLEXIO2_D04				0x11C 0x360 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_04_TMR4_TIMER0				0x11C 0x360 0x660 0x9 0x1
+#define IOMUXC_GPIO_AD_04_GPIO9_IO03				0x11C 0x360 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_05_EMVSIM1_POWER_FAIL			0x120 0x364 0x6A4 0x0 0x1
+#define IOMUXC_GPIO_AD_05_LPUART8_RTS_B				0x120 0x364 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_05_ENET_1G_1588_EVENT3_OUT		0x120 0x364 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_05_GPT2_CLK				0x120 0x364 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_05_FLEXPWM1_PWM2_B			0x120 0x364 0x514 0x4 0x1
+#define IOMUXC_GPIO_AD_05_GPIO_MUX3_IO04			0x120 0x364 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_05_WDOG2_B				0x120 0x364 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_05_FLEXIO2_D05				0x120 0x364 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_05_TMR4_TIMER1				0x120 0x364 0x664 0x9 0x1
+#define IOMUXC_GPIO_AD_05_GPIO9_IO04				0x120 0x364 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_06_USB_OTG2_OC				0x124 0x368 0x6B8 0x0 0x0
+#define IOMUXC_GPIO_AD_06_FLEXCAN1_TX				0x124 0x368 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_06_EMVSIM2_IO				0x124 0x368 0x6A8 0x2 0x0
+#define IOMUXC_GPIO_AD_06_GPT3_CAPTURE1				0x124 0x368 0x590 0x3 0x1
+#define IOMUXC_GPIO_AD_06_VIDEO_MUX_CSI_DATA15			0x124 0x368 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_06_GPIO_MUX3_IO05			0x124 0x368 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_06_ENET_1588_EVENT1_IN			0x124 0x368 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_06_FLEXIO2_D06				0x124 0x368 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_06_TMR4_TIMER2				0x124 0x368 0x668 0x9 0x0
+#define IOMUXC_GPIO_AD_06_GPIO9_IO05				0x124 0x368 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_06_FLEXPWM1_PWM0_X			0x124 0x368 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_07_USB_OTG2_PWR				0x128 0x36C 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_07_FLEXCAN1_RX				0x128 0x36C 0x498 0x1 0x0
+#define IOMUXC_GPIO_AD_07_EMVSIM2_CLK				0x128 0x36C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_07_GPT3_CAPTURE2				0x128 0x36C 0x594 0x3 0x1
+#define IOMUXC_GPIO_AD_07_VIDEO_MUX_CSI_DATA14			0x128 0x36C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_07_GPIO_MUX3_IO06			0x128 0x36C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_07_ENET_1588_EVENT1_OUT			0x128 0x36C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_07_FLEXIO2_D07				0x128 0x36C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_07_TMR4_TIMER3				0x128 0x36C 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_07_GPIO9_IO06				0x128 0x36C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_07_FLEXPWM1_PWM1_X			0x128 0x36C 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_08_USBPHY2_OTG_ID			0x12C 0x370 0x6C4 0x0 0x0
+#define IOMUXC_GPIO_AD_08_LPI2C1_SCL				0x12C 0x370 0x5AC 0x1 0x0
+#define IOMUXC_GPIO_AD_08_EMVSIM2_RST				0x12C 0x370 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_08_GPT3_COMPARE1				0x12C 0x370 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_08_VIDEO_MUX_CSI_DATA13			0x12C 0x370 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_08_GPIO_MUX3_IO07			0x12C 0x370 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_08_ENET_1588_EVENT2_IN			0x12C 0x370 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_08_FLEXIO2_D08				0x12C 0x370 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_08_GPIO9_IO07				0x12C 0x370 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_08_FLEXPWM1_PWM2_X			0x12C 0x370 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_09_USBPHY1_OTG_ID			0x130 0x374 0x6C0 0x0 0x0
+#define IOMUXC_GPIO_AD_09_LPI2C1_SDA				0x130 0x374 0x5B0 0x1 0x0
+#define IOMUXC_GPIO_AD_09_EMVSIM2_SVEN				0x130 0x374 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_09_GPT3_COMPARE2				0x130 0x374 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_09_VIDEO_MUX_CSI_DATA12			0x130 0x374 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_09_GPIO_MUX3_IO08			0x130 0x374 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_09_ENET_1588_EVENT2_OUT			0x130 0x374 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_09_FLEXIO2_D09				0x130 0x374 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_09_GPIO9_IO08				0x130 0x374 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_09_FLEXPWM1_PWM3_X			0x130 0x374 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_10_USB_OTG1_PWR				0x134 0x378 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_10_LPI2C1_SCLS				0x134 0x378 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_10_EMVSIM2_PD				0x134 0x378 0x6AC 0x2 0x0
+#define IOMUXC_GPIO_AD_10_GPT3_COMPARE3				0x134 0x378 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_10_VIDEO_MUX_CSI_DATA11			0x134 0x378 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_10_GPIO_MUX3_IO09			0x134 0x378 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_10_ENET_1588_EVENT3_IN			0x134 0x378 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_10_FLEXIO2_D10				0x134 0x378 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_10_GPIO9_IO09				0x134 0x378 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_10_FLEXPWM2_PWM0_X			0x134 0x378 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_11_USB_OTG1_OC				0x138 0x37C 0x6BC 0x0 0x0
+#define IOMUXC_GPIO_AD_11_LPI2C1_SDAS				0x138 0x37C 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_11_EMVSIM2_POWER_FAIL			0x138 0x37C 0x6B0 0x2 0x0
+#define IOMUXC_GPIO_AD_11_GPT3_CLK				0x138 0x37C 0x598 0x3 0x1
+#define IOMUXC_GPIO_AD_11_VIDEO_MUX_CSI_DATA10			0x138 0x37C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_11_GPIO_MUX3_IO10			0x138 0x37C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_11_ENET_1588_EVENT3_OUT			0x138 0x37C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_11_FLEXIO2_D11				0x138 0x37C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_11_GPIO9_IO10				0x138 0x37C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_11_FLEXPWM2_PWM1_X			0x138 0x37C 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_12_SPDIF_LOCK				0x13C 0x380 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_12_LPI2C1_HREQ				0x13C 0x380 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_12_GPT1_CAPTURE1				0x13C 0x380 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_12_FLEXSPI1_B_DATA03			0x13C 0x380 0x570 0x3 0x0
+#define IOMUXC_GPIO_AD_12_VIDEO_MUX_CSI_PIXCLK			0x13C 0x380 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_12_GPIO_MUX3_IO11			0x13C 0x380 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_12_ENET_TX_DATA03			0x13C 0x380 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_12_FLEXIO2_D12				0x13C 0x380 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_12_EWM_OUT_B				0x13C 0x380 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_12_GPIO9_IO11				0x13C 0x380 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_12_FLEXPWM2_PWM2_X			0x13C 0x380 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_13_SPDIF_SR_CLK				0x140 0x384 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_13_PIT1_TRIGGER0				0x140 0x384 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_13_GPT1_CAPTURE2				0x140 0x384 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_13_FLEXSPI1_B_DATA02			0x140 0x384 0x56C 0x3 0x0
+#define IOMUXC_GPIO_AD_13_VIDEO_MUX_CSI_MCLK			0x140 0x384 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_13_GPIO_MUX3_IO12			0x140 0x384 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_13_ENET_TX_DATA02			0x140 0x384 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_13_FLEXIO2_D13				0x140 0x384 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_13_REF_CLK_32K				0x140 0x384 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_13_GPIO9_IO12				0x140 0x384 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_13_FLEXPWM2_PWM3_X			0x140 0x384 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_14_SPDIF_EXT_CLK				0x144 0x388 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_14_REF_CLK_24M				0x144 0x388 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_14_GPT1_COMPARE1				0x144 0x388 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_14_FLEXSPI1_B_DATA01			0x144 0x388 0x568 0x3 0x0
+#define IOMUXC_GPIO_AD_14_VIDEO_MUX_CSI_VSYNC			0x144 0x388 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_14_GPIO_MUX3_IO13			0x144 0x388 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_14_ENET_RX_CLK				0x144 0x388 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_14_FLEXIO2_D14				0x144 0x388 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_14_CCM_ENET_REF_CLK_25M			0x144 0x388 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_14_GPIO9_IO13				0x144 0x388 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_14_FLEXPWM3_PWM0_X			0x144 0x388 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_15_GPIO9_IO14				0x148 0x38C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_15_FLEXPWM3_PWM1_X			0x148 0x38C 0x0 0xB 0x0
+#define IOMUXC_GPIO_AD_15_SPDIF_IN				0x148 0x38C 0x6B4 0x0 0x1
+#define IOMUXC_GPIO_AD_15_LPUART10_TXD				0x148 0x38C 0x628 0x1 0x0
+#define IOMUXC_GPIO_AD_15_GPT1_COMPARE2				0x148 0x38C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_15_FLEXSPI1_B_DATA00			0x148 0x38C 0x564 0x3 0x0
+#define IOMUXC_GPIO_AD_15_VIDEO_MUX_CSI_HSYNC			0x148 0x38C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_15_GPIO_MUX3_IO14			0x148 0x38C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_15_ENET_TX_ER				0x148 0x38C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_15_FLEXIO2_D15				0x148 0x38C 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_AD_16_SPDIF_OUT				0x14C 0x390 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_16_LPUART10_RXD				0x14C 0x390 0x624 0x1 0x0
+#define IOMUXC_GPIO_AD_16_GPT1_COMPARE3				0x14C 0x390 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_16_FLEXSPI1_B_SCLK			0x14C 0x390 0x578 0x3 0x0
+#define IOMUXC_GPIO_AD_16_VIDEO_MUX_CSI_DATA09			0x14C 0x390 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_16_GPIO_MUX3_IO15			0x14C 0x390 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_16_ENET_RX_DATA03			0x14C 0x390 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_16_FLEXIO2_D16				0x14C 0x390 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_16_ENET_1G_MDC				0x14C 0x390 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_16_GPIO9_IO15				0x14C 0x390 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_16_FLEXPWM3_PWM2_X			0x14C 0x390 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_17_SAI1_MCLK				0x150 0x394 0x66C 0x0 0x0
+#define IOMUXC_GPIO_AD_17_ACMP1_OUT				0x150 0x394 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_17_GPT1_CLK				0x150 0x394 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_17_FLEXSPI1_A_DQS			0x150 0x394 0x550 0x3 0x1
+#define IOMUXC_GPIO_AD_17_VIDEO_MUX_CSI_DATA08			0x150 0x394 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_17_GPIO_MUX3_IO16			0x150 0x394 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_17_ENET_RX_DATA02			0x150 0x394 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_17_FLEXIO2_D17				0x150 0x394 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_17_ENET_1G_MDIO				0x150 0x394 0x4C8 0x9 0x2
+#define IOMUXC_GPIO_AD_17_GPIO9_IO16				0x150 0x394 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_17_FLEXPWM3_PWM3_X			0x150 0x394 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_18_GPIO9_IO17				0x154 0x398 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_18_FLEXPWM4_PWM0_X			0x154 0x398 0x0 0xB 0x0
+#define IOMUXC_GPIO_AD_18_SAI1_RX_SYNC				0x154 0x398 0x678 0x0 0x0
+#define IOMUXC_GPIO_AD_18_ACMP2_OUT				0x154 0x398 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_18_LPSPI1_PCS1				0x154 0x398 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_18_FLEXSPI1_A_SS0_B			0x154 0x398 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_18_VIDEO_MUX_CSI_DATA07			0x154 0x398 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_18_GPIO_MUX3_IO17			0x154 0x398 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_18_ENET_CRS				0x154 0x398 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_18_FLEXIO2_D18				0x154 0x398 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_18_LPI2C2_SCL				0x154 0x398 0x5B4 0x9 0x1
+
+#define IOMUXC_GPIO_AD_19_SAI1_RX_BCLK				0x158 0x39C 0x670 0x0 0x0
+#define IOMUXC_GPIO_AD_19_ACMP3_OUT				0x158 0x39C 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_19_LPSPI1_PCS2				0x158 0x39C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_19_FLEXSPI1_A_SCLK			0x158 0x39C 0x574 0x3 0x0
+#define IOMUXC_GPIO_AD_19_VIDEO_MUX_CSI_DATA06			0x158 0x39C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_19_GPIO_MUX3_IO18			0x158 0x39C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_19_ENET_COL				0x158 0x39C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_19_FLEXIO2_D19				0x158 0x39C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_19_LPI2C2_SDA				0x158 0x39C 0x5B8 0x9 0x1
+#define IOMUXC_GPIO_AD_19_GPIO9_IO18				0x158 0x39C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_19_FLEXPWM4_PWM1_X			0x158 0x39C 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_20_SAI1_RX_DATA00			0x15C 0x3A0 0x674 0x0 0x0
+#define IOMUXC_GPIO_AD_20_ACMP4_OUT				0x15C 0x3A0 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_20_LPSPI1_PCS3				0x15C 0x3A0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_20_FLEXSPI1_A_DATA00			0x15C 0x3A0 0x554 0x3 0x0
+#define IOMUXC_GPIO_AD_20_VIDEO_MUX_CSI_DATA05			0x15C 0x3A0 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_20_GPIO_MUX3_IO19			0x15C 0x3A0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_20_KPP_ROW07				0x15C 0x3A0 0x5A8 0x6 0x0
+#define IOMUXC_GPIO_AD_20_FLEXIO2_D20				0x15C 0x3A0 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_20_ENET_QOS_1588_EVENT2_OUT		0x15C 0x3A0 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_20_GPIO9_IO19				0x15C 0x3A0 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_20_FLEXPWM4_PWM2_X			0x15C 0x3A0 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_21_SAI1_TX_DATA00			0x160 0x3A4 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_21_LPSPI2_PCS1				0x160 0x3A4 0x5E0 0x2 0x0
+#define IOMUXC_GPIO_AD_21_FLEXSPI1_A_DATA01			0x160 0x3A4 0x558 0x3 0x0
+#define IOMUXC_GPIO_AD_21_VIDEO_MUX_CSI_DATA04			0x160 0x3A4 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_21_GPIO_MUX3_IO20			0x160 0x3A4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_21_KPP_COL07				0x160 0x3A4 0x5A0 0x6 0x0
+#define IOMUXC_GPIO_AD_21_FLEXIO2_D21				0x160 0x3A4 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_21_ENET_QOS_1588_EVENT2_IN		0x160 0x3A4 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_21_GPIO9_IO20				0x160 0x3A4 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_21_FLEXPWM4_PWM3_X			0x160 0x3A4 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_22_GPIO9_IO21				0x164 0x3A8 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_22_SAI1_TX_BCLK				0x164 0x3A8 0x67C 0x0 0x0
+#define IOMUXC_GPIO_AD_22_LPSPI2_PCS2				0x164 0x3A8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_22_FLEXSPI1_A_DATA02			0x164 0x3A8 0x55C 0x3 0x0
+#define IOMUXC_GPIO_AD_22_VIDEO_MUX_CSI_DATA03			0x164 0x3A8 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_22_GPIO_MUX3_IO21			0x164 0x3A8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_22_KPP_ROW06				0x164 0x3A8 0x5A4 0x6 0x0
+#define IOMUXC_GPIO_AD_22_FLEXIO2_D22				0x164 0x3A8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_22_ENET_QOS_1588_EVENT3_OUT		0x164 0x3A8 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_23_SAI1_TX_SYNC				0x168 0x3AC 0x680 0x0 0x0
+#define IOMUXC_GPIO_AD_23_LPSPI2_PCS3				0x168 0x3AC 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_23_FLEXSPI1_A_DATA03			0x168 0x3AC 0x560 0x3 0x0
+#define IOMUXC_GPIO_AD_23_VIDEO_MUX_CSI_DATA02			0x168 0x3AC 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_23_GPIO_MUX3_IO22			0x168 0x3AC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_23_KPP_COL06				0x168 0x3AC 0x59C 0x6 0x0
+#define IOMUXC_GPIO_AD_23_FLEXIO2_D23				0x168 0x3AC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_23_ENET_QOS_1588_EVENT3_IN		0x168 0x3AC 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_23_GPIO9_IO22				0x168 0x3AC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_24_LPUART1_TXD				0x16C 0x3B0 0x620 0x0 0x0
+#define IOMUXC_GPIO_AD_24_LPSPI2_SCK				0x16C 0x3B0 0x5E4 0x1 0x0
+#define IOMUXC_GPIO_AD_24_VIDEO_MUX_CSI_DATA00			0x16C 0x3B0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_24_ENET_RX_EN				0x16C 0x3B0 0x4B8 0x3 0x0
+#define IOMUXC_GPIO_AD_24_FLEXPWM2_PWM0_A			0x16C 0x3B0 0x518 0x4 0x1
+#define IOMUXC_GPIO_AD_24_GPIO_MUX3_IO23			0x16C 0x3B0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_24_KPP_ROW05				0x16C 0x3B0 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_24_FLEXIO2_D24				0x16C 0x3B0 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_24_LPI2C4_SCL				0x16C 0x3B0 0x5C4 0x9 0x0
+#define IOMUXC_GPIO_AD_24_GPIO9_IO23				0x16C 0x3B0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_25_GPIO9_IO24				0x170 0x3B4 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_25_LPUART1_RXD				0x170 0x3B4 0x61C 0x0 0x0
+#define IOMUXC_GPIO_AD_25_LPSPI2_PCS0				0x170 0x3B4 0x5DC 0x1 0x0
+#define IOMUXC_GPIO_AD_25_VIDEO_MUX_CSI_DATA01			0x170 0x3B4 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_25_ENET_RX_ER				0x170 0x3B4 0x4BC 0x3 0x0
+#define IOMUXC_GPIO_AD_25_FLEXPWM2_PWM0_B			0x170 0x3B4 0x524 0x4 0x1
+#define IOMUXC_GPIO_AD_25_GPIO_MUX3_IO24			0x170 0x3B4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_25_KPP_COL05				0x170 0x3B4 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_25_FLEXIO2_D25				0x170 0x3B4 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_25_LPI2C4_SDA				0x170 0x3B4 0x5C8 0x9 0x0
+
+#define IOMUXC_GPIO_AD_26_LPUART1_CTS_B				0x174 0x3B8 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_26_LPSPI2_SOUT				0x174 0x3B8 0x5EC 0x1 0x0
+#define IOMUXC_GPIO_AD_26_SEMC_CSX01				0x174 0x3B8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_26_ENET_RX_DATA00			0x174 0x3B8 0x4B0 0x3 0x0
+#define IOMUXC_GPIO_AD_26_FLEXPWM2_PWM1_A			0x174 0x3B8 0x51C 0x4 0x1
+#define IOMUXC_GPIO_AD_26_GPIO_MUX3_IO25			0x174 0x3B8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_26_KPP_ROW04				0x174 0x3B8 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_26_FLEXIO2_D26				0x174 0x3B8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_26_ENET_QOS_MDC				0x174 0x3B8 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_26_GPIO9_IO25				0x174 0x3B8 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_26_USDHC2_CD_B				0x174 0x3B8 0x6D0 0xB 0x1
+
+#define IOMUXC_GPIO_AD_27_LPUART1_RTS_B				0x178 0x3BC 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_27_LPSPI2_SIN				0x178 0x3BC 0x5E8 0x1 0x0
+#define IOMUXC_GPIO_AD_27_SEMC_CSX02				0x178 0x3BC 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_27_ENET_RX_DATA01			0x178 0x3BC 0x4B4 0x3 0x0
+#define IOMUXC_GPIO_AD_27_FLEXPWM2_PWM1_B			0x178 0x3BC 0x528 0x4 0x1
+#define IOMUXC_GPIO_AD_27_GPIO_MUX3_IO26			0x178 0x3BC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_27_KPP_COL04				0x178 0x3BC 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_27_FLEXIO2_D27				0x178 0x3BC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_27_ENET_QOS_MDIO				0x178 0x3BC 0x4EC 0x9 0x1
+#define IOMUXC_GPIO_AD_27_GPIO9_IO26				0x178 0x3BC 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_27_USDHC2_WP				0x178 0x3BC 0x6D4 0xB 0x1
+
+#define IOMUXC_GPIO_AD_28_GPIO9_IO27				0x17C 0x3C0 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_28_USDHC2_VSELECT			0x17C 0x3C0 0x0 0xB 0x0
+#define IOMUXC_GPIO_AD_28_LPSPI1_SCK				0x17C 0x3C0 0x5D0 0x0 0x1
+#define IOMUXC_GPIO_AD_28_LPUART5_TXD				0x17C 0x3C0 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_28_SEMC_CSX03				0x17C 0x3C0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_28_ENET_TX_EN				0x17C 0x3C0 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_28_FLEXPWM2_PWM2_A			0x17C 0x3C0 0x520 0x4 0x1
+#define IOMUXC_GPIO_AD_28_GPIO_MUX3_IO27			0x17C 0x3C0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_28_KPP_ROW03				0x17C 0x3C0 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_28_FLEXIO2_D28				0x17C 0x3C0 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_28_VIDEO_MUX_EXT_DCIC1			0x17C 0x3C0 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_29_LPSPI1_PCS0				0x180 0x3C4 0x5CC 0x0 0x1
+#define IOMUXC_GPIO_AD_29_LPUART5_RXD				0x180 0x3C4 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_29_ENET_REF_CLK				0x180 0x3C4 0x4A8 0x2 0x0
+#define IOMUXC_GPIO_AD_29_ENET_TX_CLK				0x180 0x3C4 0x4C0 0x3 0x0
+#define IOMUXC_GPIO_AD_29_FLEXPWM2_PWM2_B			0x180 0x3C4 0x52C 0x4 0x1
+#define IOMUXC_GPIO_AD_29_GPIO_MUX3_IO28			0x180 0x3C4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_29_KPP_COL03				0x180 0x3C4 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_29_FLEXIO2_D29				0x180 0x3C4 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_29_VIDEO_MUX_EXT_DCIC2			0x180 0x3C4 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_29_GPIO9_IO28				0x180 0x3C4 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_29_USDHC2_RESET_B			0x180 0x3C4 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_30_LPSPI1_SOUT				0x184 0x3C8 0x5D8 0x0 0x1
+#define IOMUXC_GPIO_AD_30_USB_OTG2_OC				0x184 0x3C8 0x6B8 0x1 0x1
+#define IOMUXC_GPIO_AD_30_FLEXCAN2_TX				0x184 0x3C8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_30_ENET_TX_DATA00			0x184 0x3C8 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_30_LPUART3_TXD				0x184 0x3C8 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_30_GPIO_MUX3_IO29			0x184 0x3C8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_30_KPP_ROW02				0x184 0x3C8 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_30_FLEXIO2_D30				0x184 0x3C8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_30_WDOG2_RESET_B_DEB			0x184 0x3C8 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_30_GPIO9_IO29				0x184 0x3C8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_31_LPSPI1_SIN				0x188 0x3CC 0x5D4 0x0 0x1
+#define IOMUXC_GPIO_AD_31_USB_OTG2_PWR				0x188 0x3CC 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_31_FLEXCAN2_RX				0x188 0x3CC 0x49C 0x2 0x1
+#define IOMUXC_GPIO_AD_31_ENET_TX_DATA01			0x188 0x3CC 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_31_LPUART3_RXD				0x188 0x3CC 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_31_GPIO_MUX3_IO30			0x188 0x3CC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_31_KPP_COL02				0x188 0x3CC 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_31_FLEXIO2_D31				0x188 0x3CC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_31_WDOG1_RESET_B_DEB			0x188 0x3CC 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_31_GPIO9_IO30				0x188 0x3CC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_32_GPIO9_IO31				0x18C 0x3D0 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_32_LPI2C1_SCL				0x18C 0x3D0 0x5AC 0x0 0x1
+#define IOMUXC_GPIO_AD_32_USBPHY2_OTG_ID			0x18C 0x3D0 0x6C4 0x1 0x1
+#define IOMUXC_GPIO_AD_32_PGMC_PMIC_RDY				0x18C 0x3D0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_32_ENET_MDC				0x18C 0x3D0 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_32_USDHC1_CD_B				0x18C 0x3D0 0x6C8 0x4 0x0
+#define IOMUXC_GPIO_AD_32_GPIO_MUX3_IO31			0x18C 0x3D0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_32_KPP_ROW01				0x18C 0x3D0 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_32_LPUART10_TXD				0x18C 0x3D0 0x628 0x8 0x1
+#define IOMUXC_GPIO_AD_32_ENET_1G_MDC				0x18C 0x3D0 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_33_LPI2C1_SDA				0x190 0x3D4 0x5B0 0x0 0x1
+#define IOMUXC_GPIO_AD_33_USBPHY1_OTG_ID			0x190 0x3D4 0x6C0 0x1 0x1
+#define IOMUXC_GPIO_AD_33_XBAR1_INOUT17				0x190 0x3D4 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_33_ENET_MDIO				0x190 0x3D4 0x4AC 0x3 0x1
+#define IOMUXC_GPIO_AD_33_USDHC1_WP				0x190 0x3D4 0x6CC 0x4 0x0
+#define IOMUXC_GPIO_AD_33_GPIO_MUX4_IO00			0x190 0x3D4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_33_KPP_COL01				0x190 0x3D4 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_33_LPUART10_RXD				0x190 0x3D4 0x624 0x8 0x1
+#define IOMUXC_GPIO_AD_33_ENET_1G_MDIO				0x190 0x3D4 0x4C8 0x9 0x3
+#define IOMUXC_GPIO_AD_33_GPIO10_IO00				0x190 0x3D4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_34_ENET_1G_1588_EVENT0_IN		0x194 0x3D8 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_34_USB_OTG1_PWR				0x194 0x3D8 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_34_XBAR1_INOUT18				0x194 0x3D8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_34_ENET_1588_EVENT0_IN			0x194 0x3D8 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_34_USDHC1_VSELECT			0x194 0x3D8 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_34_GPIO_MUX4_IO01			0x194 0x3D8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_34_KPP_ROW00				0x194 0x3D8 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_34_LPUART10_CTS_B			0x194 0x3D8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_34_WDOG1_ANY				0x194 0x3D8 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_34_GPIO10_IO01				0x194 0x3D8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_35_GPIO10_IO02				0x198 0x3DC 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_35_ENET_1G_1588_EVENT0_OUT		0x198 0x3DC 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_35_USB_OTG1_OC				0x198 0x3DC 0x6BC 0x1 0x1
+#define IOMUXC_GPIO_AD_35_XBAR1_INOUT19				0x198 0x3DC 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_35_ENET_1588_EVENT0_OUT			0x198 0x3DC 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_35_USDHC1_RESET_B			0x198 0x3DC 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_35_GPIO_MUX4_IO02			0x198 0x3DC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_35_KPP_COL00				0x198 0x3DC 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_35_LPUART10_RTS_B			0x198 0x3DC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_35_FLEXSPI1_B_SS1_B			0x198 0x3DC 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_SD_B1_00_USDHC1_CMD				0x19C 0x3E0 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_00_XBAR1_INOUT20			0x19C 0x3E0 0x6D8 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_00_GPT4_CAPTURE1			0x19C 0x3E0 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_00_GPIO_MUX4_IO03			0x19C 0x3E0 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_00_FLEXSPI2_A_SS0_B			0x19C 0x3E0 0x0 0x6 0x0
+#define IOMUXC_GPIO_SD_B1_00_KPP_ROW07				0x19C 0x3E0 0x5A8 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_00_GPIO10_IO03			0x19C 0x3E0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_01_USDHC1_CLK				0x1A0 0x3E4 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_01_XBAR1_INOUT21			0x1A0 0x3E4 0x6DC 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_01_GPT4_CAPTURE2			0x1A0 0x3E4 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_01_GPIO_MUX4_IO04			0x1A0 0x3E4 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_01_FLEXSPI2_A_SCLK			0x1A0 0x3E4 0x58C 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_01_KPP_COL07				0x1A0 0x3E4 0x5A0 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_01_GPIO10_IO04			0x1A0 0x3E4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_02_GPIO10_IO05			0x1A4 0x3E8 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B1_02_USDHC1_DATA0			0x1A4 0x3E8 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_02_XBAR1_INOUT22			0x1A4 0x3E8 0x6E0 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_02_GPT4_COMPARE1			0x1A4 0x3E8 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_02_GPIO_MUX4_IO05			0x1A4 0x3E8 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_02_FLEXSPI2_A_DATA00			0x1A4 0x3E8 0x57C 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_02_KPP_ROW06				0x1A4 0x3E8 0x5A4 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_02_FLEXSPI1_A_SS1_B			0x1A4 0x3E8 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_SD_B1_03_USDHC1_DATA1			0x1A8 0x3EC 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_03_XBAR1_INOUT23			0x1A8 0x3EC 0x6E4 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_03_GPT4_COMPARE2			0x1A8 0x3EC 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_03_GPIO_MUX4_IO06			0x1A8 0x3EC 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_03_FLEXSPI2_A_DATA01			0x1A8 0x3EC 0x580 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_03_KPP_COL06				0x1A8 0x3EC 0x59C 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_03_FLEXSPI1_B_SS1_B			0x1A8 0x3EC 0x0 0x9 0x0
+#define IOMUXC_GPIO_SD_B1_03_GPIO10_IO06			0x1A8 0x3EC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_04_USDHC1_DATA2			0x1AC 0x3F0 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_04_XBAR1_INOUT24			0x1AC 0x3F0 0x6E8 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_04_GPT4_COMPARE3			0x1AC 0x3F0 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_04_GPIO_MUX4_IO07			0x1AC 0x3F0 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_04_FLEXSPI2_A_DATA02			0x1AC 0x3F0 0x584 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_04_FLEXSPI1_B_SS0_B			0x1AC 0x3F0 0x0 0x8 0x0
+#define IOMUXC_GPIO_SD_B1_04_ENET_QOS_1588_EVENT2_AUX_IN	0x1AC 0x3F0 0x0 0x9 0x0
+#define IOMUXC_GPIO_SD_B1_04_GPIO10_IO07			0x1AC 0x3F0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_05_GPIO10_IO08			0x1B0 0x3F4 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B1_05_USDHC1_DATA3			0x1B0 0x3F4 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_05_XBAR1_INOUT25			0x1B0 0x3F4 0x6EC 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_05_GPT4_CLK				0x1B0 0x3F4 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_05_GPIO_MUX4_IO08			0x1B0 0x3F4 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_05_FLEXSPI2_A_DATA03			0x1B0 0x3F4 0x588 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_05_FLEXSPI1_B_DQS			0x1B0 0x3F4 0x0 0x8 0x0
+#define IOMUXC_GPIO_SD_B1_05_ENET_QOS_1588_EVENT3_AUX_IN	0x1B0 0x3F4 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_SD_B2_00_GPIO10_IO09			0x1B4 0x3F8 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_00_USDHC2_DATA3			0x1B4 0x3F8 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_00_FLEXSPI1_B_DATA03			0x1B4 0x3F8 0x570 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_00_ENET_1G_RX_EN			0x1B4 0x3F8 0x4E0 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_00_LPUART9_TXD			0x1B4 0x3F8 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_00_LPSPI4_SCK				0x1B4 0x3F8 0x610 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_00_GPIO_MUX4_IO09			0x1B4 0x3F8 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_01_USDHC2_DATA2			0x1B8 0x3FC 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_01_FLEXSPI1_B_DATA02			0x1B8 0x3FC 0x56C 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_01_ENET_1G_RX_CLK			0x1B8 0x3FC 0x4CC 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_01_LPUART9_RXD			0x1B8 0x3FC 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_01_LPSPI4_PCS0			0x1B8 0x3FC 0x60C 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_01_GPIO_MUX4_IO10			0x1B8 0x3FC 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_01_GPIO10_IO10			0x1B8 0x3FC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B2_02_GPIO10_IO11			0x1BC 0x400 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_02_USDHC2_DATA1			0x1BC 0x400 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_02_FLEXSPI1_B_DATA01			0x1BC 0x400 0x568 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_02_ENET_1G_RX_DATA00			0x1BC 0x400 0x4D0 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_02_LPUART9_CTS_B			0x1BC 0x400 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_02_LPSPI4_SOUT			0x1BC 0x400 0x618 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_02_GPIO_MUX4_IO11			0x1BC 0x400 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_03_GPIO10_IO12			0x1C0 0x404 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_03_USDHC2_DATA0			0x1C0 0x404 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_03_FLEXSPI1_B_DATA00			0x1C0 0x404 0x564 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_03_ENET_1G_RX_DATA01			0x1C0 0x404 0x4D4 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_03_LPUART9_RTS_B			0x1C0 0x404 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_03_LPSPI4_SIN				0x1C0 0x404 0x614 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_03_GPIO_MUX4_IO12			0x1C0 0x404 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_04_USDHC2_CLK				0x1C4 0x408 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_04_FLEXSPI1_B_SCLK			0x1C4 0x408 0x578 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_04_ENET_1G_RX_DATA02			0x1C4 0x408 0x4D8 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_04_FLEXSPI1_A_SS1_B			0x1C4 0x408 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_04_LPSPI4_PCS1			0x1C4 0x408 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_04_GPIO_MUX4_IO13			0x1C4 0x408 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_04_GPIO10_IO13			0x1C4 0x408 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B2_05_GPIO10_IO14			0x1C8 0x40C 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_05_USDHC2_CMD				0x1C8 0x40C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_05_FLEXSPI1_A_DQS			0x1C8 0x40C 0x550 0x1 0x2
+#define IOMUXC_GPIO_SD_B2_05_ENET_1G_RX_DATA03			0x1C8 0x40C 0x4DC 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_05_FLEXSPI1_B_SS0_B			0x1C8 0x40C 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_05_LPSPI4_PCS2			0x1C8 0x40C 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_05_GPIO_MUX4_IO14			0x1C8 0x40C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_06_GPIO10_IO15			0x1CC 0x410 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_06_USDHC2_RESET_B			0x1CC 0x410 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_06_FLEXSPI1_A_SS0_B			0x1CC 0x410 0x0 0x1 0x0
+#define IOMUXC_GPIO_SD_B2_06_ENET_1G_TX_DATA03			0x1CC 0x410 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_06_LPSPI4_PCS3			0x1CC 0x410 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_06_GPT6_CAPTURE1			0x1CC 0x410 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_06_GPIO_MUX4_IO15			0x1CC 0x410 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_07_USDHC2_STROBE			0x1D0 0x414 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_07_FLEXSPI1_A_SCLK			0x1D0 0x414 0x574 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_07_ENET_1G_TX_DATA02			0x1D0 0x414 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_07_LPUART3_CTS_B			0x1D0 0x414 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_07_GPT6_CAPTURE2			0x1D0 0x414 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_07_GPIO_MUX4_IO16			0x1D0 0x414 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_07_LPSPI2_SCK				0x1D0 0x414 0x5E4 0x6 0x1
+#define IOMUXC_GPIO_SD_B2_07_ENET_TX_ER				0x1D0 0x414 0x0 0x8 0x0
+#define IOMUXC_GPIO_SD_B2_07_ENET_QOS_REF_CLK			0x1D0 0x414 0x4A0 0x9 0x1
+#define IOMUXC_GPIO_SD_B2_07_GPIO10_IO16			0x1D0 0x414 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B2_08_GPIO10_IO17			0x1D4 0x418 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_08_USDHC2_DATA4			0x1D4 0x418 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_08_FLEXSPI1_A_DATA00			0x1D4 0x418 0x554 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_08_ENET_1G_TX_DATA01			0x1D4 0x418 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_08_LPUART3_RTS_B			0x1D4 0x418 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_08_GPT6_COMPARE1			0x1D4 0x418 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_08_GPIO_MUX4_IO17			0x1D4 0x418 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_08_LPSPI2_PCS0			0x1D4 0x418 0x5DC 0x6 0x1
+
+#define IOMUXC_GPIO_SD_B2_09_GPIO10_IO18			0x1D8 0x41C 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_09_USDHC2_DATA5			0x1D8 0x41C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_09_FLEXSPI1_A_DATA01			0x1D8 0x41C 0x558 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_09_ENET_1G_TX_DATA00			0x1D8 0x41C 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_09_LPUART5_CTS_B			0x1D8 0x41C 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_09_GPT6_COMPARE2			0x1D8 0x41C 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_09_GPIO_MUX4_IO18			0x1D8 0x41C 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_09_LPSPI2_SOUT			0x1D8 0x41C 0x5EC 0x6 0x1
+
+#define IOMUXC_GPIO_SD_B2_10_GPIO10_IO19			0x1DC 0x420 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_10_USDHC2_DATA6			0x1DC 0x420 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_10_FLEXSPI1_A_DATA02			0x1DC 0x420 0x55C 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_10_ENET_1G_TX_EN			0x1DC 0x420 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_10_LPUART5_RTS_B			0x1DC 0x420 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_10_GPT6_COMPARE3			0x1DC 0x420 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_10_GPIO_MUX4_IO19			0x1DC 0x420 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_10_LPSPI2_SIN				0x1DC 0x420 0x5E8 0x6 0x1
+
+#define IOMUXC_GPIO_SD_B2_11_USDHC2_DATA7			0x1E0 0x424 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_11_FLEXSPI1_A_DATA03			0x1E0 0x424 0x560 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_11_ENET_1G_TX_CLK_IO			0x1E0 0x424 0x4E8 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_11_ENET_1G_REF_CLK			0x1E0 0x424 0x4C4 0x3 0x1
+#define IOMUXC_GPIO_SD_B2_11_GPT6_CLK				0x1E0 0x424 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_11_GPIO_MUX4_IO20			0x1E0 0x424 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_11_LPSPI2_PCS1			0x1E0 0x424 0x5E0 0x6 0x1
+#define IOMUXC_GPIO_SD_B2_11_GPIO10_IO20			0x1E0 0x424 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_00_VIDEO_MUX_LCDIF_CLK		0x1E4 0x428 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_00_ENET_1G_RX_EN			0x1E4 0x428 0x4E0 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_00_TMR1_TIMER0			0x1E4 0x428 0x63C 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_00_XBAR1_INOUT26			0x1E4 0x428 0x6F0 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_00_GPIO_MUX4_IO21			0x1E4 0x428 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_00_ENET_QOS_RX_EN			0x1E4 0x428 0x4F8 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_00_GPIO10_IO21			0x1E4 0x428 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_01_VIDEO_MUX_LCDIF_ENABLE		0x1E8 0x42C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_CLK			0x1E8 0x42C 0x4CC 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_ER			0x1E8 0x42C 0x4E4 0x2 0x1
+#define IOMUXC_GPIO_DISP_B1_01_TMR1_TIMER1			0x1E8 0x42C 0x640 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_01_XBAR1_INOUT27			0x1E8 0x42C 0x6F4 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_01_GPIO_MUX4_IO22			0x1E8 0x42C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_01_ENET_QOS_RX_CLK			0x1E8 0x42C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_01_ENET_QOS_RX_ER			0x1E8 0x42C 0x4FC 0x9 0x0
+#define IOMUXC_GPIO_DISP_B1_01_GPIO10_IO22			0x1E8 0x42C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_02_GPIO10_IO23			0x1EC 0x430 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B1_02_VIDEO_MUX_LCDIF_HSYNC		0x1EC 0x430 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_02_ENET_1G_RX_DATA00		0x1EC 0x430 0x4D0 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_02_LPI2C3_SCL			0x1EC 0x430 0x5BC 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_02_TMR1_TIMER2			0x1EC 0x430 0x644 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_02_XBAR1_INOUT28			0x1EC 0x430 0x6F8 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_02_GPIO_MUX4_IO23			0x1EC 0x430 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_02_ENET_QOS_RX_DATA00		0x1EC 0x430 0x4F0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_02_LPUART1_TXD			0x1EC 0x430 0x620 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B1_03_VIDEO_MUX_LCDIF_VSYNC		0x1F0 0x434 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_03_ENET_1G_RX_DATA01		0x1F0 0x434 0x4D4 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_03_LPI2C3_SDA			0x1F0 0x434 0x5C0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_03_TMR2_TIMER0			0x1F0 0x434 0x648 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_03_XBAR1_INOUT29			0x1F0 0x434 0x6FC 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_03_GPIO_MUX4_IO24			0x1F0 0x434 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_03_ENET_QOS_RX_DATA01		0x1F0 0x434 0x4F4 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_03_LPUART1_RXD			0x1F0 0x434 0x61C 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_03_GPIO10_IO24			0x1F0 0x434 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_04_VIDEO_MUX_LCDIF_DATA00		0x1F4 0x438 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_04_ENET_1G_RX_DATA02		0x1F4 0x438 0x4D8 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_04_LPUART4_RXD			0x1F4 0x438 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_04_TMR2_TIMER1			0x1F4 0x438 0x64C 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_04_XBAR1_INOUT30			0x1F4 0x438 0x700 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_04_GPIO_MUX4_IO25			0x1F4 0x438 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_04_ENET_QOS_RX_DATA02		0x1F4 0x438 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_04_LPSPI3_SCK			0x1F4 0x438 0x600 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_04_GPIO10_IO25			0x1F4 0x438 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_05_GPIO10_IO26			0x1F8 0x43C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B1_05_VIDEO_MUX_LCDIF_DATA01		0x1F8 0x43C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_05_ENET_1G_RX_DATA03		0x1F8 0x43C 0x4DC 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_05_LPUART4_CTS_B			0x1F8 0x43C 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_05_TMR2_TIMER2			0x1F8 0x43C 0x650 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_05_XBAR1_INOUT31			0x1F8 0x43C 0x704 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_05_GPIO_MUX4_IO26			0x1F8 0x43C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_05_ENET_QOS_RX_DATA03		0x1F8 0x43C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_05_LPSPI3_SIN			0x1F8 0x43C 0x604 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B1_06_VIDEO_MUX_LCDIF_DATA02		0x1FC 0x440 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_06_ENET_1G_TX_DATA03		0x1FC 0x440 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_06_LPUART4_TXD			0x1FC 0x440 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_06_TMR3_TIMER0			0x1FC 0x440 0x654 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_06_XBAR1_INOUT32			0x1FC 0x440 0x708 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_06_GPIO_MUX4_IO27			0x1FC 0x440 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_06_SRC_BT_CFG00			0x1FC 0x440 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_06_ENET_QOS_TX_DATA03		0x1FC 0x440 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_06_LPSPI3_SOUT			0x1FC 0x440 0x608 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_06_GPIO10_IO27			0x1FC 0x440 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_07_VIDEO_MUX_LCDIF_DATA03		0x200 0x444 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_07_ENET_1G_TX_DATA02		0x200 0x444 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_07_LPUART4_RTS_B			0x200 0x444 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_07_TMR3_TIMER1			0x200 0x444 0x658 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_07_XBAR1_INOUT33			0x200 0x444 0x70C 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_07_GPIO_MUX4_IO28			0x200 0x444 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_07_SRC_BT_CFG01			0x200 0x444 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_07_ENET_QOS_TX_DATA02		0x200 0x444 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_07_LPSPI3_PCS0			0x200 0x444 0x5F0 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_07_GPIO10_IO28			0x200 0x444 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_08_GPIO10_IO29			0x204 0x448 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B1_08_VIDEO_MUX_LCDIF_DATA04		0x204 0x448 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_08_ENET_1G_TX_DATA01		0x204 0x448 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_08_USDHC1_CD_B			0x204 0x448 0x6C8 0x2 0x1
+#define IOMUXC_GPIO_DISP_B1_08_TMR3_TIMER2			0x204 0x448 0x65C 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_08_XBAR1_INOUT34			0x204 0x448 0x710 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_08_GPIO_MUX4_IO29			0x204 0x448 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_08_SRC_BT_CFG02			0x204 0x448 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_08_ENET_QOS_TX_DATA01		0x204 0x448 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_08_LPSPI3_PCS1			0x204 0x448 0x5F4 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B1_09_VIDEO_MUX_LCDIF_DATA05		0x208 0x44C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_09_ENET_1G_TX_DATA00		0x208 0x44C 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_09_USDHC1_WP			0x208 0x44C 0x6CC 0x2 0x1
+#define IOMUXC_GPIO_DISP_B1_09_TMR4_TIMER0			0x208 0x44C 0x660 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_09_XBAR1_INOUT35			0x208 0x44C 0x714 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_09_GPIO_MUX4_IO30			0x208 0x44C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_09_SRC_BT_CFG03			0x208 0x44C 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_09_ENET_QOS_TX_DATA00		0x208 0x44C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_09_LPSPI3_PCS2			0x208 0x44C 0x5F8 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_09_GPIO10_IO30			0x208 0x44C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_10_VIDEO_MUX_LCDIF_DATA06		0x20C 0x450 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_10_ENET_1G_TX_EN			0x20C 0x450 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_10_USDHC1_RESET_B			0x20C 0x450 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_10_TMR4_TIMER1			0x20C 0x450 0x664 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_10_XBAR1_INOUT36			0x20C 0x450 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B1_10_GPIO_MUX4_IO31			0x20C 0x450 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_10_SRC_BT_CFG04			0x20C 0x450 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_10_ENET_QOS_TX_EN			0x20C 0x450 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_10_LPSPI3_PCS3			0x20C 0x450 0x5FC 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_10_GPIO10_IO31			0x20C 0x450 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_11_VIDEO_MUX_LCDIF_DATA07		0x210 0x454 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_11_ENET_1G_TX_CLK_IO		0x210 0x454 0x4E8 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_11_ENET_1G_REF_CLK			0x210 0x454 0x4C4 0x2 0x2
+#define IOMUXC_GPIO_DISP_B1_11_TMR4_TIMER2			0x210 0x454 0x668 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_11_XBAR1_INOUT37			0x210 0x454 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B1_11_GPIO_MUX5_IO00			0x210 0x454 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_11_SRC_BT_CFG05			0x210 0x454 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_11_ENET_QOS_TX_CLK			0x210 0x454 0x4A4 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_11_ENET_QOS_REF_CLK			0x210 0x454 0x4A0 0x9 0x2
+#define IOMUXC_GPIO_DISP_B1_11_GPIO11_IO00			0x210 0x454 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_00_GPIO11_IO01			0x214 0x458 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_00_VIDEO_MUX_LCDIF_DATA08		0x214 0x458 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_00_WDOG1_B				0x214 0x458 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_00_MQS_RIGHT			0x214 0x458 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_00_ENET_1G_TX_ER			0x214 0x458 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_00_SAI1_TX_DATA03			0x214 0x458 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_00_GPIO_MUX5_IO01			0x214 0x458 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_00_SRC_BT_CFG06			0x214 0x458 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_00_ENET_QOS_TX_ER			0x214 0x458 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_DISP_B2_01_VIDEO_MUX_LCDIF_DATA09		0x218 0x45C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_01_USDHC1_VSELECT			0x218 0x45C 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_01_MQS_LEFT				0x218 0x45C 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_01_WDOG2_B				0x218 0x45C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_01_SAI1_TX_DATA02			0x218 0x45C 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_01_GPIO_MUX5_IO02			0x218 0x45C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_01_SRC_BT_CFG07			0x218 0x45C 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_01_EWM_OUT_B			0x218 0x45C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_01_CCM_ENET_REF_CLK_25M		0x218 0x45C 0x0 0x9 0x0
+#define IOMUXC_GPIO_DISP_B2_01_GPIO11_IO02			0x218 0x45C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_02_GPIO11_IO03			0x21C 0x460 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_02_VIDEO_MUX_LCDIF_DATA10		0x21C 0x460 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00			0x21C 0x460 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_02_PIT1_TRIGGER3			0x21C 0x460 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_02_ARM_TRACE00			0x21C 0x460 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_02_SAI1_TX_DATA01			0x21C 0x460 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_02_GPIO_MUX5_IO03			0x21C 0x460 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_02_SRC_BT_CFG08			0x21C 0x460 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_02_ENET_QOS_TX_DATA00		0x21C 0x460 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_DISP_B2_03_GPIO11_IO04			0x220 0x464 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_03_VIDEO_MUX_LCDIF_DATA11		0x220 0x464 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01			0x220 0x464 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_03_PIT1_TRIGGER2			0x220 0x464 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_03_ARM_TRACE01			0x220 0x464 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_03_SAI1_MCLK			0x220 0x464 0x66C 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_03_GPIO_MUX5_IO04			0x220 0x464 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_03_SRC_BT_CFG09			0x220 0x464 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_03_ENET_QOS_TX_DATA01		0x220 0x464 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_DISP_B2_04_VIDEO_MUX_LCDIF_DATA12		0x224 0x468 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN			0x224 0x468 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_04_PIT1_TRIGGER1			0x224 0x468 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_04_ARM_TRACE02			0x224 0x468 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_04_SAI1_RX_SYNC			0x224 0x468 0x678 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_04_GPIO_MUX5_IO05			0x224 0x468 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_04_SRC_BT_CFG10			0x224 0x468 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_04_ENET_QOS_TX_EN			0x224 0x468 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_04_GPIO11_IO05			0x224 0x468 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_05_GPIO11_IO06			0x228 0x46C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_05_VIDEO_MUX_LCDIF_DATA13		0x228 0x46C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_05_ENET_TX_CLK			0x228 0x46C 0x4C0 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK			0x228 0x46C 0x4A8 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_05_ARM_TRACE03			0x228 0x46C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_05_SAI1_RX_BCLK			0x228 0x46C 0x670 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_05_GPIO_MUX5_IO06			0x228 0x46C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_05_SRC_BT_CFG11			0x228 0x46C 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_05_ENET_QOS_TX_CLK			0x228 0x46C 0x4A4 0x8 0x1
+
+#define IOMUXC_GPIO_DISP_B2_06_GPIO11_IO07			0x22C 0x470 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_06_VIDEO_MUX_LCDIF_DATA14		0x22C 0x470 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00			0x22C 0x470 0x4B0 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_06_LPUART7_TXD			0x22C 0x470 0x630 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_06_ARM_TRACE_CLK			0x22C 0x470 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_06_SAI1_RX_DATA00			0x22C 0x470 0x674 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_06_GPIO_MUX5_IO07			0x22C 0x470 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_06_ENET_QOS_RX_DATA00		0x22C 0x470 0x4F0 0x8 0x1
+
+#define IOMUXC_GPIO_DISP_B2_07_VIDEO_MUX_LCDIF_DATA15		0x230 0x474 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01			0x230 0x474 0x4B4 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_07_LPUART7_RXD			0x230 0x474 0x62C 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_07_ARM_TRACE_SWO			0x230 0x474 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_07_SAI1_TX_DATA00			0x230 0x474 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_07_GPIO_MUX5_IO08			0x230 0x474 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_07_ENET_QOS_RX_DATA01		0x230 0x474 0x4F4 0x8 0x1
+#define IOMUXC_GPIO_DISP_B2_07_GPIO11_IO08			0x230 0x474 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_08_GPIO11_IO09			0x234 0x478 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_08_VIDEO_MUX_LCDIF_DATA16		0x234 0x478 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN			0x234 0x478 0x4B8 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_08_LPUART8_TXD			0x234 0x478 0x638 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_08_ARM_CM7_EVENTO			0x234 0x478 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_08_SAI1_TX_BCLK			0x234 0x478 0x67C 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_08_GPIO_MUX5_IO09			0x234 0x478 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_08_ENET_QOS_RX_EN			0x234 0x478 0x4F8 0x8 0x1
+#define IOMUXC_GPIO_DISP_B2_08_LPUART1_TXD			0x234 0x478 0x620 0x9 0x2
+
+#define IOMUXC_GPIO_DISP_B2_09_GPIO11_IO10			0x238 0x47C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_09_VIDEO_MUX_LCDIF_DATA17		0x238 0x47C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER			0x238 0x47C 0x4BC 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_09_LPUART8_RXD			0x238 0x47C 0x634 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_09_ARM_CM7_EVENTI			0x238 0x47C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_09_SAI1_TX_SYNC			0x238 0x47C 0x680 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_09_GPIO_MUX5_IO10			0x238 0x47C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_09_ENET_QOS_RX_ER			0x238 0x47C 0x4FC 0x8 0x1
+#define IOMUXC_GPIO_DISP_B2_09_LPUART1_RXD			0x238 0x47C 0x61C 0x9 0x2
+
+#define IOMUXC_GPIO_DISP_B2_10_GPIO11_IO11			0x23C 0x480 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_10_VIDEO_MUX_LCDIF_DATA18		0x23C 0x480 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_10_EMVSIM2_IO			0x23C 0x480 0x6A8 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_10_LPUART2_TXD			0x23C 0x480 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_10_WDOG2_RESET_B_DEB		0x23C 0x480 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_10_XBAR1_INOUT38			0x23C 0x480 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_10_GPIO_MUX5_IO11			0x23C 0x480 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_10_LPI2C3_SCL			0x23C 0x480 0x5BC 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_10_ENET_QOS_RX_ER			0x23C 0x480 0x4FC 0x8 0x2
+#define IOMUXC_GPIO_DISP_B2_10_SPDIF_IN				0x23C 0x480 0x6B4 0x9 0x2
+
+#define IOMUXC_GPIO_DISP_B2_11_VIDEO_MUX_LCDIF_DATA19		0x240 0x484 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_11_EMVSIM2_CLK			0x240 0x484 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_11_LPUART2_RXD			0x240 0x484 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_11_WDOG1_RESET_B_DEB		0x240 0x484 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_11_XBAR1_INOUT39			0x240 0x484 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_11_GPIO_MUX5_IO12			0x240 0x484 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_11_LPI2C3_SDA			0x240 0x484 0x5C0 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_11_ENET_QOS_CRS			0x240 0x484 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_11_SPDIF_OUT			0x240 0x484 0x0 0x9 0x0
+#define IOMUXC_GPIO_DISP_B2_11_GPIO11_IO12			0x240 0x484 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_12_GPIO11_IO13			0x244 0x488 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_12_VIDEO_MUX_LCDIF_DATA20		0x244 0x488 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_12_EMVSIM2_RST			0x244 0x488 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_12_FLEXCAN1_TX			0x244 0x488 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_12_LPUART2_CTS_B			0x244 0x488 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_12_XBAR1_INOUT40			0x244 0x488 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_12_GPIO_MUX5_IO13			0x244 0x488 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_12_LPI2C4_SCL			0x244 0x488 0x5C4 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_12_ENET_QOS_COL			0x244 0x488 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_12_LPSPI4_SCK			0x244 0x488 0x610 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B2_13_GPIO11_IO14			0x248 0x48C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_13_VIDEO_MUX_LCDIF_DATA21		0x248 0x48C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_13_EMVSIM2_SVEN			0x248 0x48C 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_13_FLEXCAN1_RX			0x248 0x48C 0x498 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_13_LPUART2_RTS_B			0x248 0x48C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_13_ENET_REF_CLK			0x248 0x48C 0x4A8 0x4 0x2
+#define IOMUXC_GPIO_DISP_B2_13_GPIO_MUX5_IO14			0x248 0x48C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_13_LPI2C4_SDA			0x248 0x48C 0x5C8 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_13_ENET_QOS_1588_EVENT0_OUT		0x248 0x48C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_13_LPSPI4_SIN			0x248 0x48C 0x614 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B2_14_GPIO_MUX5_IO15			0x24C 0x490 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_14_FLEXCAN1_TX			0x24C 0x490 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_14_ENET_QOS_1588_EVENT0_IN		0x24C 0x490 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_14_LPSPI4_SOUT			0x24C 0x490 0x618 0x9 0x1
+#define IOMUXC_GPIO_DISP_B2_14_GPIO11_IO15			0x24C 0x490 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_14_VIDEO_MUX_LCDIF_DATA22		0x24C 0x490 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_14_EMVSIM2_PD			0x24C 0x490 0x6AC 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_14_WDOG2_B				0x24C 0x490 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_14_VIDEO_MUX_EXT_DCIC1		0x24C 0x490 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_14_ENET_1G_REF_CLK			0x24C 0x490 0x4C4 0x4 0x3
+
+#define IOMUXC_GPIO_DISP_B2_15_VIDEO_MUX_LCDIF_DATA23		0x250 0x494 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_15_EMVSIM2_POWER_FAIL		0x250 0x494 0x6B0 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_15_WDOG1_B				0x250 0x494 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_15_VIDEO_MUX_EXT_DCIC2		0x250 0x494 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_15_PIT1_TRIGGER0			0x250 0x494 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_15_GPIO_MUX5_IO16			0x250 0x494 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_15_FLEXCAN1_RX			0x250 0x494 0x498 0x6 0x2
+#define IOMUXC_GPIO_DISP_B2_15_ENET_QOS_1588_EVENT0_AUX_IN	0x250 0x494 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_15_LPSPI4_PCS0			0x250 0x494 0x60C 0x9 0x1
+#define IOMUXC_GPIO_DISP_B2_15_GPIO11_IO16			0x250 0x494 0x0 0xA 0x0
+
+#endif  /* _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
new file mode 100644
index 0000000000000..e3b2d23068f77
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
@@ -0,0 +1,573 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/ {
+	model = "TQ-Systems MBA6ULx Baseboard";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc1;
+		rtc0 = &rtc0;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_mba6ul_3v3>;
+		enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	beeper: beeper {
+		compatible = "gpio-beeper";
+		gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_buttons: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buttons>;
+
+		button1 {
+			label = "s14";
+			linux,code = <KEY_1>;
+			gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button2 {
+			label = "s6";
+			linux,code = <KEY_2>;
+			gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		button3 {
+			label = "s7";
+			linux,code = <KEY_3>;
+			gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			label = "POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led1 {
+			label = "led1";
+			gpios = <&expander_out1 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&expander_out1 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_lcd_pwr: regulator-lcd-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-pwr";
+		gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_mba6ul_3v3: regulator-mba6ul-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6ul-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_mba6ul_5v0: regulator-mba6ul-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6ul-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_mpcie: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		startup-delay-us = <500000>;
+		vin-supply = <&reg_mba6ul_3v3>;
+	};
+
+	reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 {
+		compatible = "regulator-fixed";
+		gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "otg2-vbus-supply-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_mpcie>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x6000000>;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "imx-audio-tlv320aic32x4";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic32x4>;
+		audio-asrc = <&asrc>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_mba6ul_3v3>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_mba6ul_3v3>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <768000000>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	num-cs = <1>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_mba6ul_3v3>;
+	phy-reset-gpios = <&expander_out1 1 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-reset-post-delay = <1>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_mdc>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_mba6ul_3v3>;
+	phy-reset-gpios = <&expander_out1 2 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-reset-post-delay = <1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			reg = <0>;
+			max-speed = <100>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
+			reg = <1>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&i2c4 {
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX6UL_CLK_SAI1>;
+		clock-names = "mclk";
+		ldoin-supply = <&reg_mba6ul_3v3>;
+		iov-supply = <&reg_mba6ul_3v3>;
+	};
+
+	jc42: temperature-sensor@19 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x19>;
+	};
+
+	expander_out0: gpio-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_mba6ul_3v3>;
+	};
+
+	expander_in0: gpio-expander@21 {
+		compatible = "nxp,pca9554";
+		reg = <0x21>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander_in0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_mba6ul_3v3>;
+
+		enet1_int-hog {
+			gpio-hog;
+			gpios = <6 0>;
+			input;
+		};
+
+		enet2_int-hog {
+			gpio-hog;
+			gpios = <7 0>;
+			input;
+		};
+	};
+
+	expander_out1: gpio-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_mba6ul_3v3>;
+	};
+
+	analog_touch: touchscreen@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpio4>;
+		interrupt-controller;
+		status = "disabled";
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,adc-freq = <1>;      /* 3.25 MHz ADC clock speed */
+			st,ave-ctrl = <3>;      /* 8 sample average control */
+			st,fraction-z = <7>;    /* 7 length fractional part in z */
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			st,mod-12b = <1>;       /* 12-bit ADC */
+			st,ref-sel = <0>;       /* internal ADC reference */
+			st,sample-time = <4>;   /* ADC converstion time: 80 clocks */
+			st,settling = <3>;      /* 1 ms panel driver settling time */
+			st,touch-det-delay = <5>; /* 5 ms touch detect interrupt delay */
+		};
+	};
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	se97b: eeprom@51 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		vcc-supply = <&reg_mba6ul_3v3>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>,
+			  <&clks IMX6UL_CLK_SAI1>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24000000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	/* for DTE mode, add below change */
+	/* fsl,dte-mode; */
+	/* pinctrl-0 = <&pinctrl_uart6dte>; */
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* otg-port */
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	power-active-high;
+	over-current-active-low;
+	/* we implement only dual role but not a fully featured OTG */
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+/* 7-port usb hub */
+/* id, pwr, oc pins not connected */
+&usbotg2 {
+	disable-over-current;
+	vbus-supply = <&reg_otg2vbus_5v0>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_mba6ul_3v3>;
+	vqmmc-supply = <&reg_vccsd>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_buttons: buttonsgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x100b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK	0x1b020
+			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO	0x1b020
+			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI	0x1b020
+			MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0	0x1b020
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b0a8
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0a0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0a0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b0a8
+		>;
+	};
+
+	pinctrl_enet2_mdc: enet2mdcgrp {
+		fsl,pins = <
+			/* mdio */
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_expander_in0: expanderin0grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x1b0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6UL_PAD_GPIO1_IO09__PWM2_OUT		0x00003050
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK	0x1b0b1
+			MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC	0x1b0b1
+			MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA	0x1f0b8
+			MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA	0x110b0
+			MX6UL_PAD_CSI_DATA01__SAI1_MCLK		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
+			MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS	0x1b0b1
+			MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6dte: uart6dte {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX	0x1b0b1
+			MX6UL_PAD_CSI_MCLK__UART6_DTE_RX	0x1b0b1
+			MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS	0x1b0b1
+			MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x00017059
+			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x0001b0b0
+			MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR	0x0001b099
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x00017059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x00017059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x00017059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x00017059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x00017059
+			/* WP */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
+			/* CD */
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x000170b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x000170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x000170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x000170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x000170b9
+			/* WP */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
+			/* CD */
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x000170f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x000170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x000170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x000170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x000170f9
+			/* WP */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
+			/* CD */
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B	0x0001b099
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/Makefile b/arch/arm/boot/dts/nxp/lpc/Makefile
new file mode 100644
index 0000000000000..56b9a0ebb9179
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_LPC18XX) += \
+	lpc4337-ciaa.dtb \
+	lpc4350-hitex-eval.dtb \
+	lpc4357-ea4357-devkit.dtb \
+	lpc4357-myd-lpc4357.dtb
+dtb-$(CONFIG_ARCH_LPC32XX) += \
+	lpc3250-ea3250.dtb \
+	lpc3250-phy3250.dtb
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
new file mode 100644
index 0000000000000..9cf09c183b85e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
@@ -0,0 +1,537 @@
+/*
+ * Common base for NXP LPC18xx and LPC43xx devices.
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+#include "../../armv7-m.dtsi"
+
+#include "dt-bindings/clock/lpc18xx-cgu.h"
+#include "dt-bindings/clock/lpc18xx-ccu.h"
+
+#define LPC_PIN(port, pin)	(0x##port * 32 + pin)
+#define LPC_GPIO(port, pin)	(port * 32 + pin)
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-m3";
+			device_type = "cpu";
+			reg = <0x0>;
+			clocks = <&ccu1 CLK_CPU_CORE>;
+		};
+	};
+
+	clocks {
+		xtal: xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+
+		xtal32: xtal32 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		enet_rx_clk: enet_rx_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "enet_rx_clk";
+		};
+
+		enet_tx_clk: enet_tx_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "enet_tx_clk";
+		};
+
+		gp_clkin: gp_clkin {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "gp_clkin";
+		};
+	};
+
+	soc {
+		sct_pwm: pwm@40000000 {
+			compatible = "nxp,lpc1850-sct-pwm";
+			reg = <0x40000000 0x1000>;
+			clocks =<&ccu1 CLK_CPU_SCT>;
+			clock-names = "pwm";
+			resets = <&rgu 37>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		dmac: dma-controller@40002000 {
+			compatible = "arm,pl080", "arm,primecell";
+			arm,primecell-periphid = <0x00041080>;
+			reg = <0x40002000 0x1000>;
+			interrupts = <2>;
+			clocks = <&ccu1 CLK_CPU_DMA>;
+			clock-names = "apb_pclk";
+			resets = <&rgu 19>;
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			dma-requests = <16>;
+			lli-bus-interface-ahb1;
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb1;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+		};
+
+		spifi: flash-controller@40003000 {
+			compatible = "nxp,lpc1773-spifi";
+			reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+			reg-names = "spifi", "flash";
+			interrupts = <30>;
+			clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+			clock-names = "spifi", "reg";
+			resets = <&rgu 53>;
+			status = "disabled";
+		};
+
+		mmcsd: mmcsd@40004000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x40004000 0x1000>;
+			interrupts = <6>;
+			clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
+			clock-names = "ciu", "biu";
+			resets = <&rgu 20>;
+			status = "disabled";
+		};
+
+		usb0: usb@40006100 {
+			compatible = "nxp,lpc1850-ehci", "generic-ehci";
+			reg = <0x40006100 0x100>;
+			interrupts = <8>;
+			clocks = <&ccu1 CLK_CPU_USB0>;
+			resets = <&rgu 17>;
+			phys = <&usb0_otg_phy>;
+			phy-names = "usb";
+			has-transaction-translator;
+			status = "disabled";
+		};
+
+		usb1: usb@40007100 {
+			compatible = "nxp,lpc1850-ehci", "generic-ehci";
+			reg = <0x40007100 0x100>;
+			interrupts = <9>;
+			clocks = <&ccu1 CLK_CPU_USB1>;
+			resets = <&rgu 18>;
+			status = "disabled";
+		};
+
+		emc: memory-controller@40005000 {
+			compatible = "arm,pl172", "arm,primecell";
+			reg = <0x40005000 0x1000>;
+			clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
+			clock-names = "mpmcclk", "apb_pclk";
+			resets = <&rgu 21>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x1c000000 0x1000000
+				  1 0 0x1d000000 0x1000000
+				  2 0 0x1e000000 0x1000000
+				  3 0 0x1f000000 0x1000000>;
+			status = "disabled";
+		};
+
+		lcdc: lcd-controller@40008000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x40008000 0x1000>;
+			interrupts = <7>;
+			interrupt-names = "combined";
+			clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
+			clock-names = "clcdclk", "apb_pclk";
+			resets = <&rgu 16>;
+			status = "disabled";
+		};
+
+		eeprom: eeprom@4000e000 {
+			compatible = "nxp,lpc1857-eeprom";
+			reg = <0x4000e000 0x1000>, <0x20040000 0x4000>;
+			reg-names = "reg", "mem";
+			clocks = <&ccu1 CLK_CPU_EEPROM>;
+			clock-names = "eeprom";
+			resets = <&rgu 27>;
+			interrupts = <4>;
+			status = "disabled";
+		};
+
+		mac: ethernet@40010000 {
+			compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
+			reg = <0x40010000 0x2000>;
+			interrupts = <5>;
+			interrupt-names = "macirq";
+			clocks = <&ccu1 CLK_CPU_ETHERNET>;
+			clock-names = "stmmaceth";
+			resets = <&rgu 22>;
+			reset-names = "stmmaceth";
+			rx-fifo-depth = <256>;
+			tx-fifo-depth = <256>;
+			snps,pbl = <4>; /* 32 (8x mode) */
+			snps,force_thresh_dma_mode;
+			status = "disabled";
+		};
+
+		creg: syscon@40043000 {
+			compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+			reg = <0x40043000 0x1000>;
+			clocks = <&ccu1 CLK_CPU_CREG>;
+			resets = <&rgu 5>;
+
+			creg_clk: clock-controller {
+				compatible = "nxp,lpc1850-creg-clk";
+				clocks = <&xtal32>;
+				#clock-cells = <1>;
+			};
+
+			usb0_otg_phy: phy {
+				compatible = "nxp,lpc1850-usb-otg-phy";
+				clocks = <&ccu1 CLK_USB0>;
+				#phy-cells = <0>;
+			};
+
+			dmamux: dma-mux {
+				compatible = "nxp,lpc1850-dmamux";
+				#dma-cells = <3>;
+				dma-requests = <64>;
+				dma-masters = <&dmac>;
+			};
+		};
+
+		rtc: rtc@40046000 {
+			compatible = "nxp,lpc1850-rtc", "nxp,lpc1788-rtc";
+			reg = <0x40046000 0x1000>;
+			interrupts = <47>;
+			clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+			clock-names = "rtc", "reg";
+		};
+
+		cgu: clock-controller@40050000 {
+			compatible = "nxp,lpc1850-cgu";
+			reg = <0x40050000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
+		};
+
+		ccu1: clock-controller@40051000 {
+			compatible = "nxp,lpc1850-ccu";
+			reg = <0x40051000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&cgu BASE_APB3_CLK>,   <&cgu BASE_APB1_CLK>,
+				 <&cgu BASE_SPIFI_CLK>,  <&cgu BASE_CPU_CLK>,
+				 <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
+				 <&cgu BASE_USB1_CLK>,   <&cgu BASE_SPI_CLK>;
+			clock-names = "base_apb3_clk",   "base_apb1_clk",
+				      "base_spifi_clk",  "base_cpu_clk",
+				      "base_periph_clk", "base_usb0_clk",
+				      "base_usb1_clk",   "base_spi_clk";
+		};
+
+		ccu2: clock-controller@40052000 {
+			compatible = "nxp,lpc1850-ccu";
+			reg = <0x40052000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
+				 <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
+				 <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
+				 <&cgu BASE_SSP0_CLK>,  <&cgu BASE_SDIO_CLK>;
+			clock-names = "base_audio_clk", "base_uart3_clk",
+				      "base_uart2_clk", "base_uart1_clk",
+				      "base_uart0_clk", "base_ssp1_clk",
+				      "base_ssp0_clk",  "base_sdio_clk";
+		};
+
+		rgu: reset-controller@40053000 {
+			compatible = "nxp,lpc1850-rgu";
+			reg = <0x40053000 0x1000>;
+			clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+			clock-names = "delay", "reg";
+			#reset-cells = <1>;
+		};
+
+		watchdog@40080000 {
+			compatible = "nxp,lpc1850-wwdt";
+			reg = <0x40080000 0x24>;
+			interrupts = <49>;
+			clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
+			clock-names = "wdtclk", "reg";
+		};
+
+		uart0: serial@40081000 {
+			compatible = "nxp,lpc1850-uart", "ns16550a";
+			reg = <0x40081000 0x1000>;
+			reg-shift = <2>;
+			interrupts = <24>;
+			clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
+			clock-names = "uartclk", "reg";
+			resets = <&rgu 44>;
+			dmas = <&dmamux  1 1 2
+				&dmamux  2 1 2
+				&dmamux 11 2 2
+				&dmamux 12 2 2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@40082000 {
+			compatible = "nxp,lpc1850-uart", "ns16550a";
+			reg = <0x40082000 0x1000>;
+			reg-shift = <2>;
+			interrupts = <25>;
+			clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
+			clock-names = "uartclk", "reg";
+			resets = <&rgu 45>;
+			dmas = <&dmamux 3 1 2
+				&dmamux 4 1 2>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		ssp0: spi@40083000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x40083000 0x1000>;
+			interrupts = <22>;
+			clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>;
+			clock-names = "sspclk", "apb_pclk";
+			resets = <&rgu 50>;
+			dmas = <&dmamux  9 0 2
+				&dmamux 10 0 2>;
+			dma-names = "rx", "tx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		timer0: timer@40084000 {
+			compatible = "nxp,lpc3220-timer";
+			reg = <0x40084000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ccu1 CLK_CPU_TIMER0>;
+			clock-names = "timerclk";
+			resets = <&rgu 32>;
+		};
+
+		timer1: timer@40085000 {
+			compatible = "nxp,lpc3220-timer";
+			reg = <0x40085000 0x1000>;
+			interrupts = <13>;
+			clocks = <&ccu1 CLK_CPU_TIMER1>;
+			clock-names = "timerclk";
+			resets = <&rgu 33>;
+		};
+
+		pinctrl: pinctrl@40086000 {
+			compatible = "nxp,lpc1850-scu";
+			reg = <0x40086000 0x1000>;
+			clocks = <&ccu1 CLK_CPU_SCU>;
+		};
+
+		i2c0: i2c@400a1000 {
+			compatible = "nxp,lpc1788-i2c";
+			reg = <0x400a1000 0x1000>;
+			interrupts = <18>;
+			clocks = <&ccu1 CLK_APB1_I2C0>;
+			resets = <&rgu 48>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can1: can@400a4000 {
+			compatible = "bosch,c_can";
+			reg = <0x400a4000 0x1000>;
+			interrupts = <43>;
+			clocks = <&ccu1 CLK_APB1_CAN1>;
+			resets = <&rgu 54>;
+			status = "disabled";
+		};
+
+		uart2: serial@400c1000 {
+			compatible = "nxp,lpc1850-uart", "ns16550a";
+			reg = <0x400c1000 0x1000>;
+			reg-shift = <2>;
+			interrupts = <26>;
+			clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>;
+			clock-names = "uartclk", "reg";
+			resets = <&rgu 46>;
+			dmas = <&dmamux 5 1 2
+				&dmamux 6 1 2>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@400c2000 {
+			compatible = "nxp,lpc1850-uart", "ns16550a";
+			reg = <0x400c2000 0x1000>;
+			reg-shift = <2>;
+			interrupts = <27>;
+			clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>;
+			clock-names = "uartclk", "reg";
+			resets = <&rgu 47>;
+			dmas = <&dmamux  7 1 2
+				&dmamux  8 1 2
+				&dmamux 13 3 2
+				&dmamux 14 3 2>;
+			dma-names = "tx", "rx", "rx", "tx";
+			status = "disabled";
+		};
+
+		timer2: timer@400c3000 {
+			compatible = "nxp,lpc3220-timer";
+			reg = <0x400c3000 0x1000>;
+			interrupts = <14>;
+			clocks = <&ccu1 CLK_CPU_TIMER2>;
+			clock-names = "timerclk";
+			resets = <&rgu 34>;
+		};
+
+		timer3: timer@400c4000 {
+			compatible = "nxp,lpc3220-timer";
+			reg = <0x400c4000 0x1000>;
+			interrupts = <15>;
+			clocks = <&ccu1 CLK_CPU_TIMER3>;
+			clock-names = "timerclk";
+			resets = <&rgu 35>;
+		};
+
+		ssp1: spi@400c5000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x400c5000 0x1000>;
+			interrupts = <23>;
+			clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>;
+			clock-names = "sspclk", "apb_pclk";
+			resets = <&rgu 51>;
+			dmas = <&dmamux 11 2 2
+				&dmamux 12 2 2
+				&dmamux  3 3 2
+				&dmamux  4 3 2
+				&dmamux  5 2 2
+				&dmamux  6 2 2
+				&dmamux 13 2 2
+				&dmamux 14 2 2>;
+			dma-names = "rx", "tx", "tx", "rx",
+				    "tx", "rx", "rx", "tx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@400e0000 {
+			compatible = "nxp,lpc1788-i2c";
+			reg = <0x400e0000 0x1000>;
+			interrupts = <19>;
+			clocks = <&ccu1 CLK_APB3_I2C1>;
+			resets = <&rgu 49>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dac: dac@400e1000 {
+			compatible = "nxp,lpc1850-dac";
+			reg = <0x400e1000 0x1000>;
+			interrupts = <0>;
+			clocks = <&ccu1 CLK_APB3_DAC>;
+			resets = <&rgu 42>;
+			status = "disabled";
+		};
+
+		can0: can@400e2000 {
+			compatible = "bosch,c_can";
+			reg = <0x400e2000 0x1000>;
+			interrupts = <51>;
+			clocks = <&ccu1 CLK_APB3_CAN0>;
+			resets = <&rgu 55>;
+			status = "disabled";
+		};
+
+		adc0: adc@400e3000 {
+			compatible = "nxp,lpc1850-adc";
+			reg = <0x400e3000 0x1000>;
+			interrupts = <17>;
+			clocks = <&ccu1 CLK_APB3_ADC0>;
+			resets = <&rgu 40>;
+			status = "disabled";
+		};
+
+		adc1: adc@400e4000 {
+			compatible = "nxp,lpc1850-adc";
+			reg = <0x400e4000 0x1000>;
+			interrupts = <21>;
+			clocks = <&ccu1 CLK_APB3_ADC1>;
+			resets = <&rgu 41>;
+			status = "disabled";
+		};
+
+		gpio: gpio@400f4000 {
+			compatible = "nxp,lpc1850-gpio";
+			reg = <0x400f4000 0x4000>;
+			clocks = <&ccu1 CLK_CPU_GPIO>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges =	<&pinctrl LPC_GPIO(0,0)  LPC_PIN(0,0)  2>,
+					<&pinctrl LPC_GPIO(0,4)  LPC_PIN(1,0)  1>,
+					<&pinctrl LPC_GPIO(0,8)  LPC_PIN(1,1)  4>,
+					<&pinctrl LPC_GPIO(1,8)  LPC_PIN(1,5)  2>,
+					<&pinctrl LPC_GPIO(1,0)  LPC_PIN(1,7)  8>,
+					<&pinctrl LPC_GPIO(0,2)  LPC_PIN(1,15) 2>,
+					<&pinctrl LPC_GPIO(0,12) LPC_PIN(1,17) 2>,
+					<&pinctrl LPC_GPIO(0,15) LPC_PIN(1,20) 1>,
+					<&pinctrl LPC_GPIO(5,0)  LPC_PIN(2,0)  7>,
+					<&pinctrl LPC_GPIO(0,7)  LPC_PIN(2,7)  1>,
+					<&pinctrl LPC_GPIO(5,7)  LPC_PIN(2,8)  1>,
+					<&pinctrl LPC_GPIO(1,10) LPC_PIN(2,9)  1>,
+					<&pinctrl LPC_GPIO(0,14) LPC_PIN(2,10) 1>,
+					<&pinctrl LPC_GPIO(1,11) LPC_PIN(2,11) 3>,
+					<&pinctrl LPC_GPIO(5,8)  LPC_PIN(3,1)  2>,
+					<&pinctrl LPC_GPIO(1,14) LPC_PIN(3,4)  2>,
+					<&pinctrl LPC_GPIO(0,6)  LPC_PIN(3,6)  1>,
+					<&pinctrl LPC_GPIO(5,10) LPC_PIN(3,7)  2>,
+					<&pinctrl LPC_GPIO(2,0)  LPC_PIN(4,0)  7>,
+					<&pinctrl LPC_GPIO(5,12) LPC_PIN(4,8)  3>,
+					<&pinctrl LPC_GPIO(2,9)  LPC_PIN(5,0)  7>,
+					<&pinctrl LPC_GPIO(2,7)  LPC_PIN(5,7)  1>,
+					<&pinctrl LPC_GPIO(3,0)  LPC_PIN(6,1)  5>,
+					<&pinctrl LPC_GPIO(0,5)  LPC_PIN(6,6)  1>,
+					<&pinctrl LPC_GPIO(5,15) LPC_PIN(6,7)  2>,
+					<&pinctrl LPC_GPIO(3,5)  LPC_PIN(6,9)  3>,
+					<&pinctrl LPC_GPIO(2,8)  LPC_PIN(6,12) 1>,
+					<&pinctrl LPC_GPIO(3,8)  LPC_PIN(7,0)  8>,
+					<&pinctrl LPC_GPIO(4,0)  LPC_PIN(8,0)  8>,
+					<&pinctrl LPC_GPIO(4,12) LPC_PIN(9,0)  4>,
+					<&pinctrl LPC_GPIO(5,17) LPC_PIN(9,4)  2>,
+					<&pinctrl LPC_GPIO(4,11) LPC_PIN(9,6)  1>,
+					<&pinctrl LPC_GPIO(4,8)  LPC_PIN(a,1)  3>,
+					<&pinctrl LPC_GPIO(5,19) LPC_PIN(a,4)  1>,
+					<&pinctrl LPC_GPIO(5,20) LPC_PIN(b,0)  7>,
+					<&pinctrl LPC_GPIO(6,0)  LPC_PIN(c,1) 14>,
+					<&pinctrl LPC_GPIO(6,14) LPC_PIN(d,0) 17>,
+					<&pinctrl LPC_GPIO(7,0)  LPC_PIN(e,0) 16>,
+					<&pinctrl LPC_GPIO(7,16) LPC_PIN(f,1)  3>,
+					<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5)  7>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dts b/arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dts
new file mode 100644
index 0000000000000..63c6f17bb7c9f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Embedded Artists LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ */
+
+/dts-v1/;
+#include "lpc32xx.dtsi"
+
+/ {
+	model = "Embedded Artists LPC3250 board based on NXP LPC3250";
+	compatible = "ea,ea3250", "nxp,lpc3250";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x4000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button {
+			label = "Interrupt Key";
+			linux,code = <103>;
+			gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
+		};
+
+		key1 {
+			label = "KEY1";
+			linux,code = <1>;
+			gpios = <&pca9532 0 0>;
+		};
+
+		key2 {
+			label = "KEY2";
+			linux,code = <2>;
+			gpios = <&pca9532 1 0>;
+		};
+
+		key3 {
+			label = "KEY3";
+			linux,code = <3>;
+			gpios = <&pca9532 2 0>;
+		};
+
+		key4 {
+			label = "KEY4";
+			linux,code = <4>;
+			gpios = <&pca9532 3 0>;
+		};
+
+		joy0 {
+			label = "Joystick Key 0";
+			linux,code = <10>;
+			gpios = <&gpio 2 0 0>; /* P2.0 */
+		};
+
+		joy1 {
+			label = "Joystick Key 1";
+			linux,code = <11>;
+			gpios = <&gpio 2 1 0>; /* P2.1 */
+		};
+
+		joy2 {
+			label = "Joystick Key 2";
+			linux,code = <12>;
+			gpios = <&gpio 2 2 0>; /* P2.2 */
+		};
+
+		joy3 {
+			label = "Joystick Key 3";
+			linux,code = <13>;
+			gpios = <&gpio 2 3 0>; /* P2.3 */
+		};
+
+		joy4 {
+			label = "Joystick Key 4";
+			linux,code = <14>;
+			gpios = <&gpio 2 4 0>; /* P2.4 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* LEDs on OEM Board */
+
+		led1 {
+			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
+			linux,default-trigger = "timer";
+			default-state = "off";
+		};
+
+		led2 {
+			gpios = <&gpio 2 10 1>; /* P2.10, active low */
+			default-state = "off";
+		};
+
+		led3 {
+			gpios = <&gpio 2 11 1>; /* P2.11, active low */
+			default-state = "off";
+		};
+
+		led4 {
+			gpios = <&gpio 2 12 1>; /* P2.12, active low */
+			default-state = "off";
+		};
+
+		/* LEDs on Base Board */
+
+		lede1 {
+			gpios = <&pca9532 8 0>;
+			default-state = "off";
+		};
+		lede2 {
+			gpios = <&pca9532 9 0>;
+			default-state = "off";
+		};
+		lede3 {
+			gpios = <&pca9532 10 0>;
+			default-state = "off";
+		};
+		lede4 {
+			gpios = <&pca9532 11 0>;
+			default-state = "off";
+		};
+		lede5 {
+			gpios = <&pca9532 12 0>;
+			default-state = "off";
+		};
+		lede6 {
+			gpios = <&pca9532 13 0>;
+			default-state = "off";
+		};
+		lede7 {
+			gpios = <&pca9532 14 0>;
+			default-state = "off";
+		};
+		lede8 {
+			gpios = <&pca9532 15 0>;
+			default-state = "off";
+		};
+	};
+};
+
+/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
+&adc {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	uda1380: uda1380@18 {
+		compatible = "nxp,uda1380";
+		reg = <0x18>;
+		power-gpio = <&gpio 3 10 0>;
+		reset-gpio = <&gpio 3 2 0>;
+		dac-clk = "wspll";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+
+	pca9532: pca9532@60 {
+		compatible = "nxp,pca9532";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2cusb {
+	clock-frequency = <100000>;
+
+	isp1301: usb-transceiver@2d {
+		compatible = "nxp,isp1301";
+		reg = <0x2d>;
+	};
+};
+
+&mac {
+	phy-mode = "rmii";
+	use-iram;
+	status = "okay";
+};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+	transceiver = <&isp1301>;
+	status = "okay";
+};
+
+&sd {
+	wp-gpios = <&pca9532 5 0>;
+	cd-gpios = <&pca9532 4 0>;
+	cd-inverted;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* 128MB Flash via SLC NAND controller */
+&slc {
+	status = "okay";
+
+	nxp,wdr-clks = <14>;
+	nxp,wwidth = <260000000>;
+	nxp,whold = <104000000>;
+	nxp,wsetup = <200000000>;
+	nxp,rdr-clks = <14>;
+	nxp,rwidth = <34666666>;
+	nxp,rhold = <104000000>;
+	nxp,rsetup = <200000000>;
+	nand-on-flash-bbt;
+	gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mtd0@0 {
+			label = "ea3250-boot";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		mtd1@80000 {
+			label = "ea3250-uboot";
+			reg = <0x00080000 0x000c0000>;
+			read-only;
+		};
+
+		mtd2@140000 {
+			label = "ea3250-kernel";
+			reg = <0x00140000 0x00400000>;
+		};
+
+		mtd3@540000 {
+			label = "ea3250-rootfs";
+			reg = <0x00540000 0x07ac0000>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart6 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts b/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts
new file mode 100644
index 0000000000000..21a6d0bca1e8a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PHYTEC phyCORE-LPC3250 board
+ *
+ * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ */
+
+/dts-v1/;
+#include "lpc32xx.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
+	compatible = "phytec,phy3250", "nxp,lpc3250";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 { /* red */
+			gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
+			default-state = "off";
+		};
+
+		led1 { /* green */
+			gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel: panel {
+		compatible = "sharp,lq035q7db03";
+		power-supply = <&reg_lcd>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&cldc_output>;
+			};
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio 5 4 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio 5 0 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_sd: regulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio 5 5 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&clcd {
+	max-memory-bandwidth = <18710000>;
+	status = "okay";
+
+	port {
+		cldc_output: endpoint {
+			remote-endpoint = <&panel_input>;
+			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	uda1380: uda1380@18 {
+		compatible = "nxp,uda1380";
+		reg = <0x18>;
+		power-gpio = <&gpio 3 10 0>;
+		reset-gpio = <&gpio 3 2 0>;
+		dac-clk = "wspll";
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2cusb {
+	clock-frequency = <100000>;
+
+	isp1301: usb-transceiver@2c {
+		compatible = "nxp,isp1301";
+		reg = <0x2c>;
+	};
+};
+
+&key {
+	keypad,num-rows = <1>;
+	keypad,num-columns = <1>;
+	nxp,debounce-delay-ms = <3>;
+	nxp,scan-delay-ms = <34>;
+	linux,keymap = <0x00000002>;
+	status = "okay";
+};
+
+&mac {
+	phy-mode = "rmii";
+	use-iram;
+	status = "okay";
+};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+	transceiver = <&isp1301>;
+	status = "okay";
+};
+
+&sd {
+	wp-gpios = <&gpio 3 0 0>;
+	cd-gpios = <&gpio 3 1 0>;
+	cd-inverted;
+	bus-width = <4>;
+	vmmc-supply = <&reg_sd>;
+	status = "okay";
+};
+
+/* 64MB Flash via SLC NAND controller */
+&slc {
+	status = "okay";
+
+	nxp,wdr-clks = <14>;
+	nxp,wwidth = <40000000>;
+	nxp,whold = <100000000>;
+	nxp,wsetup = <100000000>;
+	nxp,rdr-clks = <14>;
+	nxp,rwidth = <40000000>;
+	nxp,rhold = <66666666>;
+	nxp,rsetup = <100000000>;
+	nand-on-flash-bbt;
+	gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mtd0@0 {
+			label = "phy3250-boot";
+			reg = <0x00000000 0x00064000>;
+			read-only;
+		};
+
+		mtd1@64000 {
+			label = "phy3250-uboot";
+			reg = <0x00064000 0x00190000>;
+			read-only;
+		};
+
+		mtd2@1f4000 {
+			label = "phy3250-ubt-prms";
+			reg = <0x001f4000 0x00010000>;
+		};
+
+		mtd3@204000 {
+			label = "phy3250-kernel";
+			reg = <0x00204000 0x00400000>;
+		};
+
+		mtd4@604000 {
+			label = "phy3250-rootfs";
+			reg = <0x00604000 0x039fc000>;
+		};
+	};
+};
+
+&ssp0 {
+	num-cs = <1>;
+	cs-gpios = <&gpio 3 5 0>;
+	status = "okay";
+
+	eeprom: at25@0 {
+		compatible = "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+
+		pl022,interface = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+
+		at25,byte-len = <0x8000>;
+		at25,addr-mode = <2>;
+		at25,page-size = <64>;
+	};
+};
+
+&tsc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
new file mode 100644
index 0000000000000..974410918f35b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
@@ -0,0 +1,508 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NXP LPC32xx SoC
+ *
+ * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ */
+
+#include <dt-bindings/clock/lpc32xx-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "nxp,lpc3220";
+	interrupt-parent = <&mic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	clocks {
+		xtal_32k: xtal_32k {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "xtal_32k";
+		};
+
+		xtal: xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <13000000>;
+			clock-output-names = "xtal";
+		};
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x00000000 0x10000000>,
+			 <0x20000000 0x20000000 0x30000000>,
+			 <0xe0000000 0xe0000000 0x04000000>;
+
+		iram: sram@8000000 {
+			compatible = "mmio-sram";
+			reg = <0x08000000 0x20000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x08000000 0x20000>;
+		};
+
+		/*
+		 * Enable either SLC or MLC
+		 */
+		slc: flash@20020000 {
+			compatible = "nxp,lpc3220-slc";
+			reg = <0x20020000 0x1000>;
+			clocks = <&clk LPC32XX_CLK_SLC>;
+			status = "disabled";
+		};
+
+		mlc: flash@200a8000 {
+			compatible = "nxp,lpc3220-mlc";
+			reg = <0x200a8000 0x11000>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_MLC>;
+			status = "disabled";
+		};
+
+		dma: dma@31000000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0x31000000 0x1000>;
+			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_DMA>;
+			clock-names = "apb_pclk";
+		};
+
+		usb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x31020000 0x00001000>;
+
+			/*
+			 * Enable either ohci or usbd (gadget)!
+			 */
+			ohci: ohci@0 {
+				compatible = "nxp,ohci-nxp", "usb-ohci";
+				reg = <0x0 0x300>;
+				interrupt-parent = <&sic1>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
+				status = "disabled";
+			};
+
+			usbd: usbd@0 {
+				compatible = "nxp,lpc3220-udc";
+				reg = <0x0 0x300>;
+				interrupt-parent = <&sic1>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH>,
+					     <30 IRQ_TYPE_LEVEL_HIGH>,
+					     <28 IRQ_TYPE_LEVEL_HIGH>,
+					     <26 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
+				status = "disabled";
+			};
+
+			i2cusb: i2c@300 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x300 0x100>;
+				interrupt-parent = <&sic1>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			usbclk: clock-controller@f00 {
+				compatible = "nxp,lpc3220-usb-clk";
+				reg = <0xf00 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		clcd: clcd@31040000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x31040000 0x1000>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
+			clock-names = "clcdclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		mac: ethernet@31060000 {
+			compatible = "nxp,lpc-eth";
+			reg = <0x31060000 0x1000>;
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_MAC>;
+			status = "disabled";
+		};
+
+		emc: memory-controller@31080000 {
+			compatible = "arm,pl175", "arm,primecell";
+			reg = <0x31080000 0x1000>;
+			clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
+			clock-names = "mpmcclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe0000000 0x01000000>,
+				 <1 0xe1000000 0x01000000>,
+				 <2 0xe2000000 0x01000000>,
+				 <3 0xe3000000 0x01000000>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x20000000 0x20000000 0x30000000>;
+
+			/*
+			 * ssp0 and spi1 are shared pins;
+			 * enable one in your board dts, as needed.
+			 */
+			ssp0: spi@20084000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x20084000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_SSP0>;
+				clock-names = "apb_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@20088000 {
+				compatible = "nxp,lpc3220-spi";
+				reg = <0x20088000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_SPI1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			/*
+			 * ssp1 and spi2 are shared pins;
+			 * enable one in your board dts, as needed.
+			 */
+			ssp1: spi@2008c000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x2008c000 0x1000>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_SSP1>;
+				clock-names = "apb_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@20090000 {
+				compatible = "nxp,lpc3220-spi";
+				reg = <0x20090000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_SPI2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2s0: i2s@20094000 {
+				compatible = "nxp,lpc3220-i2s";
+				reg = <0x20094000 0x1000>;
+				status = "disabled";
+			};
+
+			sd: sd@20098000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				reg = <0x20098000 0x1000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_SD>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			i2s1: i2s@2009c000 {
+				compatible = "nxp,lpc3220-i2s";
+				reg = <0x2009c000 0x1000>;
+				status = "disabled";
+			};
+
+			/* UART5 first since it is the default console, ttyS0 */
+			uart5: serial@40090000 {
+				/* actually, ns16550a w/ 64 byte fifos! */
+				compatible = "nxp,lpc3220-uart";
+				reg = <0x40090000 0x1000>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART5>;
+				status = "disabled";
+			};
+
+			uart3: serial@40080000 {
+				compatible = "nxp,lpc3220-uart";
+				reg = <0x40080000 0x1000>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART3>;
+				status = "disabled";
+			};
+
+			uart4: serial@40088000 {
+				compatible = "nxp,lpc3220-uart";
+				reg = <0x40088000 0x1000>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART4>;
+				status = "disabled";
+			};
+
+			uart6: serial@40098000 {
+				compatible = "nxp,lpc3220-uart";
+				reg = <0x40098000 0x1000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART6>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@400a0000 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x400a0000 0x100>;
+				interrupt-parent = <&sic1>;
+				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk LPC32XX_CLK_I2C1>;
+			};
+
+			i2c2: i2c@400a8000 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x400a8000 0x100>;
+				interrupt-parent = <&sic1>;
+				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk LPC32XX_CLK_I2C2>;
+			};
+
+			mpwm: mpwm@400e8000 {
+				compatible = "nxp,lpc3220-motor-pwm";
+				reg = <0x400e8000 0x78>;
+				status = "disabled";
+				#pwm-cells = <2>;
+			};
+		};
+
+		fab {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x20000000 0x20000000 0x30000000>;
+
+			/* System Control Block */
+			scb {
+				compatible = "simple-bus";
+				ranges = <0x0 0x40004000 0x00001000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				clk: clock-controller@0 {
+					compatible = "nxp,lpc3220-clk";
+					reg = <0x00 0x114>;
+					#clock-cells = <1>;
+
+					clocks = <&xtal_32k>, <&xtal>;
+					clock-names = "xtal_32k", "xtal";
+				};
+			};
+
+			mic: interrupt-controller@40008000 {
+				compatible = "nxp,lpc3220-mic";
+				reg = <0x40008000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sic1: interrupt-controller@4000c000 {
+				compatible = "nxp,lpc3220-sic";
+				reg = <0x4000c000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				interrupt-parent = <&mic>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
+					     <30 IRQ_TYPE_LEVEL_LOW>;
+				};
+
+			sic2: interrupt-controller@40010000 {
+				compatible = "nxp,lpc3220-sic";
+				reg = <0x40010000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				interrupt-parent = <&mic>;
+				interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
+					     <31 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			uart1: serial@40014000 {
+				compatible = "nxp,lpc3220-hsuart";
+				reg = <0x40014000 0x1000>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			uart2: serial@40018000 {
+				compatible = "nxp,lpc3220-hsuart";
+				reg = <0x40018000 0x1000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			uart7: serial@4001c000 {
+				compatible = "nxp,lpc3220-hsuart";
+				reg = <0x4001c000 0x1000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			rtc: rtc@40024000 {
+				compatible = "nxp,lpc3220-rtc";
+				reg = <0x40024000 0x1000>;
+				interrupt-parent = <&sic1>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_RTC>;
+			};
+
+			gpio: gpio@40028000 {
+				compatible = "nxp,lpc3220-gpio";
+				reg = <0x40028000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <3>; /* bank, pin, flags */
+			};
+
+			timer4: timer@4002c000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x4002c000 0x1000>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER4>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+
+			timer5: timer@40030000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40030000 0x1000>;
+				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER5>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+
+			watchdog: watchdog@4003c000 {
+				compatible = "nxp,pnx4008-wdt";
+				reg = <0x4003c000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_WDOG>;
+			};
+
+			timer0: timer@40044000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40044000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_TIMER0>;
+				clock-names = "timerclk";
+				interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			/*
+			 * TSC vs. ADC: Since those two share the same
+			 * hardware, you need to choose from one of the
+			 * following two and do 'status = "okay";' for one of
+			 * them
+			 */
+
+			adc: adc@40048000 {
+				compatible = "nxp,lpc3220-adc";
+				reg = <0x40048000 0x1000>;
+				interrupt-parent = <&sic1>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_ADC>;
+				status = "disabled";
+			};
+
+			tsc: tsc@40048000 {
+				compatible = "nxp,lpc3220-tsc";
+				reg = <0x40048000 0x1000>;
+				interrupt-parent = <&sic1>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_ADC>;
+				status = "disabled";
+			};
+
+			timer1: timer@4004c000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x4004c000 0x1000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER1>;
+				clock-names = "timerclk";
+			};
+
+			key: key@40050000 {
+				compatible = "nxp,lpc3220-key";
+				reg = <0x40050000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_KEY>;
+				interrupt-parent = <&sic1>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			timer2: timer@40058000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40058000 0x1000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER2>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+
+			pwm1: pwm@4005c000 {
+				compatible = "nxp,lpc3220-pwm";
+				reg = <0x4005c000 0x4>;
+				clocks = <&clk LPC32XX_CLK_PWM1>;
+				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
+				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@4005c004 {
+				compatible = "nxp,lpc3220-pwm";
+				reg = <0x4005c004 0x4>;
+				clocks = <&clk LPC32XX_CLK_PWM2>;
+				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
+				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
+				status = "disabled";
+			};
+
+			timer3: timer@40060000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40060000 0x1000>;
+				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER3>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
new file mode 100644
index 0000000000000..beddaba85393e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
@@ -0,0 +1,221 @@
+/*
+ * CIAA NXP LPC4337 (http://www.proyecto-ciaa.com.ar)
+ *
+ * Copyright (C) 2015 VanguardiaSur - www.vanguardiasur.com.ar
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+	model = "CIAA NXP LPC4337";
+	compatible = "ciaa,lpc4337", "nxp,lpc4337", "nxp,lpc4350";
+
+	aliases {
+		serial0 = &uart2;
+		serial1 = &uart3;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = &uart2;
+	};
+
+	memory@28000000 {
+		device_type = "memory";
+		reg = <0x28000000 0x0800000>; /* 8 MB */
+	};
+};
+
+&pinctrl {
+	enet_rmii_pins: enet-rmii-pins {
+		enet_rmii_rxd_cfg {
+			pins = "p1_15", "p0_0";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_txd_cfg {
+			pins = "p1_18", "p1_20";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_rx_dv_cfg {
+			pins = "p1_16";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_tx_en_cfg {
+			pins = "p0_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_ref_clk_cfg {
+			pins = "p1_19";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdc_cfg {
+			pins = "p7_7";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	ssp_pins: ssp-pins {
+		ssp1_cs {
+			pins = "p6_7";
+			function = "gpio";
+			bias-pull-up;
+			bias-disable;
+		};
+
+		ssp1_miso_mosi {
+			pins = "p1_3", "p1_4";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-pull-down;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		ssp1_sck {
+			pins = "pf_4";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-disable;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		uart2_rx_cfg {
+			pins = "p7_2";
+			function = "uart2";
+			bias-disable;
+			input-enable;
+		};
+
+		uart2_tx_cfg {
+			pins = "p7_1";
+			function = "uart2";
+			bias-disable;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		uart3_rx_cfg {
+			pins = "p2_4";
+			function = "uart3";
+			bias-disable;
+			input-enable;
+		};
+
+		uart3_tx_cfg {
+			pins = "p2_3";
+			function = "uart3";
+			bias-disable;
+		};
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <50000000>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "microchip,24c512", "atmel,24c512";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	eeprom@54 {
+		compatible = "microchip,24c512", "atmel,24c512";
+		reg = <0x54>;
+	};
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_rmii_pins>;
+};
+
+&sct_pwm {
+	status = "okay";
+};
+
+&ssp1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp_pins>;
+	cs-gpios = <&gpio LPC_GPIO(5,15) GPIO_ACTIVE_HIGH>;
+	num-cs = <1>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
new file mode 100644
index 0000000000000..93d0c2e99e7ce
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
@@ -0,0 +1,481 @@
+/*
+ * Hitex LPC4350 Evaluation Board
+ *
+ * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4350.dtsi"
+
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+	model = "Hitex LPC4350 Evaluation Board";
+	compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@28000000 {
+		device_type = "memory";
+		reg = <0x28000000 0x800000>; /* 8 MB */
+	};
+
+	pca_buttons {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+		autorepeat;
+
+		button0 {
+			label = "joy:right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
+		};
+
+		button1 {
+			label = "joy:up";
+			linux,code = <KEY_UP>;
+			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+
+		button2 {
+			label = "joy:enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		button3 {
+			label = "joy:left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button4 {
+			label = "joy:down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
+		};
+
+		button5 {
+			label = "user:sw3";
+			linux,code = <KEY_F1>;
+			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		button6 {
+			label = "user:sw4";
+			linux,code = <KEY_F2>;
+			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button7 {
+			label = "user:sw5";
+			linux,code = <KEY_F3>;
+			gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pca_leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "ext:led0";
+			gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1 {
+			label = "ext:led1";
+			gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			label = "ext:led2";
+			gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			label = "ext:led3";
+			gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vcc: vcc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&pinctrl {
+	adc1_pins: adc1-pins {
+		adc1_pins_cfg {
+			pins = "pf_9";
+			function = "adc";
+			input-disable;
+			bias-disable;
+		};
+	};
+
+	emc_pins: emc-pins {
+		emc_addr0_23_cfg {
+			pins =	"p2_9",  "p2_10", "p2_11", "p2_12",
+				"p2_13", "p1_0",  "p1_1",  "p1_2",
+				"p2_8",  "p2_7",  "p2_6",  "p2_2",
+				"p2_1",  "p2_0",  "p6_8",  "p6_7",
+				"pd_16", "pd_15", "pe_0",  "pe_1",
+				"pe_2",  "pe_3",  "pe_4",  "pa_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_data0_15_cfg {
+			pins =	"p1_7",  "p1_8",  "p1_9",  "p1_10",
+				"p1_11", "p1_12", "p1_13", "p1_14",
+				"p5_4",  "p5_5",  "p5_6",  "p5_7",
+				"p5_0",  "p5_1",  "p5_2",  "p5_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_we_oe_cfg {
+			pins = "p1_6", "p1_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_bls0_3_cfg {
+			pins = "p1_4", "p6_6", "pd_13", "pd_10";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_cs0_cs2_cfg {
+			pins = "p1_5", "pd_12";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dqm0_3_cfg {
+			pins = "p6_12", "p6_10", "pd_0", "pe_13";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_ras_cas_cfg {
+			pins = "p6_5", "p6_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dycs0_cfg {
+			pins = "p6_9";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_cke_cfg {
+			pins = "p6_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_clock_cfg {
+			pins = "clk0", "clk1", "clk2", "clk3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	enet_mii_pins: enet-mii-pins {
+		enet_mii_rxd0_3_cfg {
+			pins = "p1_15", "p0_0", "p9_3", "p9_2";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mii_txd0_3_cfg {
+			pins = "p1_18", "p1_20", "p9_4", "p9_5";
+			function = "enet";
+			bias-disable;
+		};
+
+		enet_mii_crs_col_cfg {
+			pins = "p9_0", "p9_6";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mii_rx_clk_dv_er_cfg {
+			pins = "pc_0", "p1_16", "p9_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mii_tx_clk_en_cfg {
+			pins = "p1_19", "p0_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mdc_cfg {
+			pins = "pc_1";
+			function = "enet";
+			bias-disable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	spifi_pins: spifi-pins {
+		spifi_clk_cfg {
+			pins = "p3_3";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_mosi_miso_sio2_3_cfg {
+			pins = "p3_7", "p3_6", "p3_5", "p3_4";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_cs_cfg {
+			pins = "p3_8";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		uart0_rx_cfg {
+			pins = "pf_11";
+			function = "uart0";
+			input-schmitt-disable;
+			bias-disable;
+			input-enable;
+		};
+
+		uart0_tx_cfg {
+			pins = "pf_10";
+			function = "uart0";
+			bias-pull-down;
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&vcc>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_pins>;
+};
+
+&emc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emc_pins>;
+
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <0>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <0>;
+		mpmc,read-access-delay = <70>;
+		mpmc,page-mode-read-delay = <70>;
+
+		flash@0,0 {
+			compatible = "sst,sst39vf320", "cfi-flash";
+			reg = <0 0 0x400000>;
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x000000 0x040000>; /* 256 KiB */
+			};
+
+			partition@1 {
+				label = "kernel";
+				reg = <0x040000 0x2C0000>; /* 2.75 MiB */
+			};
+
+			partition@2 {
+				label = "rootfs";
+				reg = <0x300000 0x100000>; /* 1 MiB */
+			};
+		};
+	};
+
+	cs2 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <2>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <30>;
+		mpmc,read-access-delay = <90>;
+		mpmc,page-mode-read-delay = <55>;
+		mpmc,write-access-delay = <55>;
+		mpmc,turn-round-delay = <55>;
+
+		ext_sram: sram@2,0 {
+			compatible = "mmio-sram";
+			reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */
+		};
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <25000000>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	sensor@18 {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,24c02", "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	pca_gpio: gpio@24 {
+		compatible = "nxp,pca9673";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "mii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_mii_pins>;
+};
+
+&spifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spifi_pins>;
+
+	flash {
+		compatible = "jedec,spi-nor";
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x000000 0x040000>; /* 256 KiB */
+		};
+
+		partition@1 {
+			label = "kernel";
+			reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+		};
+
+		partition@2 {
+			label = "rootfs";
+			reg = <0x300000 0x500000>; /* 5 MiB */
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
new file mode 100644
index 0000000000000..c4422f5870556
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
@@ -0,0 +1,39 @@
+/*
+ * NXP LPC4350 and LPC4330 SoC
+ *
+ * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+/ {
+	compatible = "nxp,lpc4350", "nxp,lpc4330";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-m4";
+		};
+	};
+
+	soc {
+		sram0: sram@10000000 {
+			compatible = "mmio-sram";
+			reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */
+		};
+
+		sram1: sram@10080000 {
+			compatible = "mmio-sram";
+			reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */
+		};
+
+		sram2: sram@20000000 {
+			compatible = "mmio-sram";
+			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
new file mode 100644
index 0000000000000..224f80a4a31d8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
@@ -0,0 +1,623 @@
+/*
+ * Embedded Artist LPC4357 Developer's Kit
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+	model = "Embedded Artists' LPC4357 Developer's Kit";
+	compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@28000000 {
+		device_type = "memory";
+		reg = <0x28000000 0x2000000>; /* 32 MB */
+	};
+
+	vcc: vcc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/* vmmc is controlled by sdmmc host internally */
+	vmmc: vmmc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	gpio_joystick {
+		compatible = "gpio-keys-polled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_joystick_pins>;
+		poll-interval = <100>;
+		autorepeat;
+
+		button0 {
+			label = "joy_enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
+		};
+
+		button1 {
+			label = "joy_left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
+		};
+
+		button2 {
+			label = "joy_up";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
+		};
+
+		button3 {
+			label = "joy_right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
+		};
+
+		button4 {
+			label = "joy_down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds_mmio {
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&mmio_leds 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			gpios = <&mmio_leds 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			gpios = <&mmio_leds 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4 {
+			gpios = <&mmio_leds 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5 {
+			gpios = <&mmio_leds 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led6 {
+			gpios = <&mmio_leds 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led7 {
+			gpios = <&mmio_leds 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led8 {
+			gpios = <&mmio_leds 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led9 {
+			gpios = <&mmio_leds 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led10 {
+			gpios = <&mmio_leds 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led11 {
+			gpios = <&mmio_leds 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led12 {
+			gpios = <&mmio_leds 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led13 {
+			gpios = <&mmio_leds 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led14 {
+			gpios = <&mmio_leds 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led15 {
+			gpios = <&mmio_leds 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led16 {
+			gpios = <&mmio_leds 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	emc_pins: emc-pins {
+		emc_addr0_23_cfg {
+			pins =	"p2_9",  "p2_10", "p2_11", "p2_12",
+				"p2_13", "p1_0",  "p1_1",  "p1_2",
+				"p2_8",  "p2_7",  "p2_6",  "p2_2",
+				"p2_1",  "p2_0",  "p6_8",  "p6_7",
+				"pd_16", "pd_15", "pe_0",  "pe_1",
+				"pe_2",  "pe_3",  "pe_4",  "pa_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_data0_31_cfg {
+			pins =	"p1_7",  "p1_8",  "p1_9",  "p1_10",
+				"p1_11", "p1_12", "p1_13", "p1_14",
+				"p5_4",  "p5_5",  "p5_6",  "p5_7",
+				"p5_0",  "p5_1",  "p5_2",  "p5_3",
+				"pd_2",  "pd_3",  "pd_4",  "pd_5",
+				"pd_6",  "pd_7",  "pd_8",  "pd_9",
+				"pe_5",  "pe_6",  "pe_7",  "pe_8",
+				"pe_9",  "pe_10", "pe_11", "pe_12";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_we_oe_cfg {
+			pins = "p1_6", "p1_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_bls0_3_cfg {
+			pins = "p1_4", "p6_6", "pd_13", "pd_10";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_cs0_3_cfg {
+			pins = "p1_5", "p6_3", "pd_12", "pd_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dqm0_3_cfg {
+			pins = "p6_12", "p6_10", "pd_0", "pe_13";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_ras_cas_cfg {
+			pins = "p6_5", "p6_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dycs0_cfg {
+			pins = "p6_9";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_cke_cfg {
+			pins = "p6_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_clock_cfg {
+			pins = "clk0", "clk1", "clk2", "clk3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	enet_rmii_pins: enet-rmii-pins {
+		enet_rmii_rxd_cfg {
+			pins = "p1_15", "p0_0";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_txd_cfg {
+			pins = "p1_18", "p1_20";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_rx_dv_cfg {
+			pins = "p1_16";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_tx_en_cfg {
+			pins = "p0_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_ref_clk_cfg {
+			pins = "p1_19";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdc_cfg {
+			pins = "pc_1";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	gpio_joystick_pins: gpio-joystick-pins {
+		gpio_joystick_cfg {
+			pins =	"p9_0", "p9_1", "pa_1", "pa_2", "pa_3";
+			function = "gpio";
+			input-enable;
+			bias-disable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	sdmmc_pins: sdmmc-pins {
+		sdmmc_clk_cfg {
+			pins = "pc_0";
+			function = "sdmmc";
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		sdmmc_cmd_dat0_3_cfg {
+			pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
+			function = "sdmmc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		sdmmc_cd_cfg {
+			pins = "pc_8";
+			function = "sdmmc";
+			bias-pull-down;
+			input-enable;
+		};
+
+		sdmmc_pow_cfg {
+			pins = "pc_9";
+			function = "sdmmc";
+			bias-pull-down;
+		};
+	};
+
+	spifi_pins: spifi-pins {
+		spifi_clk_cfg {
+			pins = "p3_3";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_mosi_miso_sio2_3_cfg {
+			pins = "p3_7", "p3_6", "p3_5", "p3_4";
+			function = "spifi";
+			slew-rate = <0>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_cs_cfg {
+			pins = "p3_8";
+			function = "spifi";
+			bias-disable;
+		};
+	};
+
+	ssp0_pins: ssp0-pins {
+		ssp0_sck_miso_mosi {
+			pins = "pf_0", "pf_2", "pf_3";
+			function = "ssp0";
+			slew-rate = <1>;
+			bias-pull-down;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		ssp0_ssel {
+			pins = "pf_1";
+			function = "ssp0";
+			bias-pull-up;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		uart0_rx_cfg {
+			pins = "pf_11";
+			function = "uart0";
+			input-schmitt-disable;
+			bias-disable;
+			input-enable;
+		};
+
+		uart0_tx_cfg {
+			pins = "pf_10";
+			function = "uart0";
+			bias-pull-down;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		uart3_rx_cfg {
+			pins = "p2_4";
+			function = "uart3";
+			input-schmitt-disable;
+			bias-disable;
+			input-enable;
+		};
+
+		uart3_tx_cfg {
+			pins = "p9_3";
+			function = "uart3";
+			bias-pull-down;
+		};
+	};
+
+	usb0_pins: usb0-pins {
+		usb0_pwr_enable {
+			pins = "p2_3";
+			function = "usb0";
+		};
+
+		usb0_pwr_fault {
+			pins = "p8_0";
+			function = "usb0";
+			bias-disable;
+			input-enable;
+		};
+	};
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&vcc>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	mma7455@1d {
+		compatible = "fsl,mma7455";
+		reg = <0x1d>;
+	};
+
+	lm75@48 {
+		compatible = "nxp,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@57 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&dac {
+	status = "okay";
+	vref-supply = <&vcc>;
+};
+
+&emc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emc_pins>;
+
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <0>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <0>;
+		mpmc,read-access-delay = <70>;
+		mpmc,page-mode-read-delay = <70>;
+
+		flash@0,0 {
+			compatible = "sst,sst39vf320", "cfi-flash";
+			reg = <0 0 0x400000>;
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x000000 0x040000>; /* 256 KiB */
+			};
+
+			partition@1 {
+				label = "kernel";
+				reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+			};
+
+			partition@2 {
+				label = "rootfs";
+				reg = <0x300000 0x100000>; /* 1 MiB */
+			};
+		};
+	};
+
+	cs2 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <2>;
+		mpmc,memory-width = <16>;
+
+		mmio_leds: gpio@2,0 {
+			compatible = "ti,7416374";
+			reg = <2 0 0x2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <50000000>;
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_rmii_pins>;
+};
+
+&mmcsd {
+	status = "okay";
+	bus-width = <4>;
+	vmmc-supply = <&vmmc>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_pins>;
+};
+
+&spifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spifi_pins>;
+
+	flash {
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "data";
+			reg = <0 0x200000>;
+		};
+	};
+};
+
+&ssp0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp0_pins>;
+	num-cs = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
new file mode 100644
index 0000000000000..1f84654df50c3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * MYIR Tech MYD-LPC4357 Development Board with 800x480 7" TFT panel
+ *
+ * Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MYIR Tech LPC4357 Development Board";
+	compatible = "myir,myd-lpc4357", "nxp,lpc4357";
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@28000000 {
+		device_type = "memory";
+		reg = <0x28000000 0x2000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led1 {
+			gpios = <&gpio LPC_GPIO(6,15) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			gpios = <&gpio LPC_GPIO(6,16) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			gpios = <&gpio LPC_GPIO(6,17) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led4 {
+			gpios = <&gpio LPC_GPIO(6,10) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led5 {
+			gpios = <&gpio LPC_GPIO(7,14) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led6 {
+			gpios = <&gpio LPC_GPIO(6,14) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,at070tn92";
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lcdc_output>;
+			};
+		};
+	};
+
+	vcc: vcc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vmmc: vmmc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&pinctrl {
+	can0_pins: can0-pins {
+		can_rd_cfg {
+			pins = "p3_1";
+			function = "can0";
+			input-enable;
+		};
+
+		can_td_cfg {
+			pins = "p3_2";
+			function = "can0";
+		};
+	};
+
+	can1_pins: can1-pins {
+		can_rd_cfg {
+			pins = "pe_1";
+			function = "can1";
+			input-enable;
+		};
+
+		can_td_cfg {
+			pins = "pe_0";
+			function = "can1";
+		};
+	};
+
+	emc_pins: emc-pins {
+		emc_addr0_22_cfg {
+			pins = "p2_9",  "p2_10", "p2_11", "p2_12",
+			       "p2_13", "p1_0",  "p1_1",  "p1_2",
+			       "p2_8",  "p2_7",  "p2_6",  "p2_2",
+			       "p2_1",  "p2_0",  "p6_8",  "p6_7",
+			       "pd_16", "pd_15", "pe_0",  "pe_1",
+			       "pe_2",  "pe_3",  "pe_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_data0_15_cfg {
+			pins = "p1_7",  "p1_8",  "p1_9",  "p1_10",
+			       "p1_11", "p1_12", "p1_13", "p1_14",
+			       "p5_4",  "p5_5",  "p5_6",  "p5_7",
+			       "p5_0",  "p5_1",  "p5_2",  "p5_3";
+			function = "emc";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_we_oe_cfg {
+			pins = "p1_6", "p1_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_cs0_cfg {
+			pins = "p1_5";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_dqm0_1_cfg {
+			pins = "p6_12", "p6_10";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_ras_cas_cfg {
+			pins = "p6_5", "p6_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_dycs0_cfg {
+			pins = "p6_9";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_cke_cfg {
+			pins = "p6_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_clock_cfg {
+			pins = "clk0";
+			function = "emc";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+	};
+
+	enet_rmii_pins: enet-rmii-pins {
+		enet_rmii_rxd_cfg {
+			pins = "p1_15", "p0_0";
+			function = "enet";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		enet_rmii_txd_cfg {
+			pins = "p1_18", "p1_20";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		enet_rmii_rx_dv_cfg {
+			pins = "p1_16";
+			function = "enet";
+			input-enable;
+			input-schmitt-disable;
+			bias-disable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			input-enable;
+			input-schmitt-disable;
+			bias-disable;
+		};
+
+		enet_mdc_cfg {
+			pins = "pc_1";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		enet_rmii_tx_en_cfg {
+			pins = "p0_1";
+			function = "enet";
+			bias-disable;
+		};
+
+		enet_ref_clk_cfg {
+			pins = "p1_19";
+			function = "enet";
+			slew-rate = <1>;
+			input-enable;
+			input-schmitt-disable;
+			bias-disable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		i2c1_pins_cfg {
+			pins = "pe_15", "pe_13";
+			function = "i2c1";
+			input-enable;
+		};
+	};
+
+	lcd_pins: lcd-pins {
+		lcd_vd0_23_cfg {
+			pins = "p4_1", "p4_4", "p4_3",  "p4_2",
+			       "p8_7", "p8_6", "p8_5",  "p8_4",
+			       "p7_5", "p4_8", "p4_10", "p4_9",
+			       "p8_3", "pb_6", "pb_5",  "pb_4",
+			       "p7_4", "p7_3", "p7_2",  "p7_1",
+			       "pb_3", "pb_2", "pb_1",  "pb_0";
+			function = "lcd";
+		};
+
+		lcd_vsync_en_dclk_lp_pwr_cfg {
+			pins = "p4_5", "p4_6", "p4_7", "p7_6", "p7_7";
+			function = "lcd";
+		};
+	};
+
+	led_pins: led-pins {
+		led_1_6_cfg {
+			pins = "pd_1", "pd_2", "pd_3", "pc_11", "pe_14", "pd_0";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	sdmmc_pins: sdmmc-pins {
+		sdmmc_clk_cfg {
+			pins = "pc_0";
+			function = "sdmmc";
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		sdmmc_cmd_dat0_3_cfg {
+			pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
+			function = "sdmmc";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		sdmmc_cd_cfg {
+			pins = "pc_8";
+			function = "sdmmc";
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	spifi_pins: spifi-pins {
+		spifi_sck_cfg {
+			pins = "p3_3";
+			function = "spifi";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		spifi_mosi_miso_sio2_sio3_cfg {
+			pins = "p3_7", "p3_6", "p3_5", "p3_4";
+			function = "spifi";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		spifi_cs_cfg {
+			pins = "p3_8";
+			function = "spifi";
+			bias-disable;
+		};
+	};
+
+	ssp1_pins: ssp1-pins {
+		ssp1_sck_cfg {
+			pins = "pf_4";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		ssp1_miso_cfg {
+			pins = "pf_6";
+			function = "ssp1";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		ssp1_mosi_cfg {
+			pins = "pf_7";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		ssp1_ssel_cfg {
+			pins = "pf_5";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		uart0_rxd_cfg {
+			pins = "pf_11";
+			function = "uart0";
+			input-enable;
+			input-schmitt-disable;
+			bias-disable;
+		};
+
+		uart0_clk_dir_txd_cfg {
+			pins = "pf_8", "pf_9", "pf_10";
+			function = "uart0";
+			bias-pull-down;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		uart1_rxd_cfg {
+			pins = "pc_14";
+			function = "uart1";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		uart1_dtr_txd_cfg {
+			pins = "pc_12", "pc_13";
+			function = "uart1";
+			bias-pull-down;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		uart2_rxd_cfg {
+			pins = "pa_2";
+			function = "uart2";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		uart2_txd_cfg {
+			pins = "pa_1";
+			function = "uart2";
+			bias-pull-down;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		uart3_rx_cfg {
+			pins = "p2_4";
+			function = "uart3";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		uart3_tx_cfg {
+			pins = "p2_3";
+			function = "uart3";
+			bias-pull-down;
+		};
+	};
+
+	usb0_pins: usb0-pins {
+		usb0_pwr_enable_cfg {
+			pins = "p6_3";
+			function = "usb0";
+		};
+
+		usb0_pwr_fault_cfg {
+			pins = "p8_0";
+			function = "usb0";
+			bias-disable;
+			input-enable;
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&vcc>;
+};
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins>;
+};
+
+/* Pin conflict with EMC, muxed by JP5 and JP6 */
+&can1 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins>;
+};
+
+&emc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emc_pins>;
+
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <0>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <0>;
+		mpmc,read-access-delay = <70>;
+		mpmc,page-mode-read-delay = <70>;
+
+		/* SST/Microchip SST39VF1601 */
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x400000>;
+			bank-width = <2>;
+		};
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <50000000>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	sensor@49 {
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c512";
+		reg = <0x50>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	max-memory-bandwidth = <92240000>;
+
+	port {
+		lcdc_output: endpoint {
+			remote-endpoint = <&panel_input>;
+			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+		};
+	};
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_rmii_pins>;
+	phy-handle = <&phy1>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&mmcsd {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_pins>;
+	bus-width = <4>;
+	vmmc-supply = <&vmmc>;
+};
+
+/* Pin conflict with SSP0, the latter is routed to J17 pin header */
+&spifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spifi_pins>;
+
+	/* Atmel AT25DF321A */
+	flash {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <51000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&ssp1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp1_pins>;
+	num-cs = <1>;
+	cs-gpios = <&gpio LPC_GPIO(7,19) GPIO_ACTIVE_LOW>;
+};
+
+/* Routed to J17 pin header */
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+/* RS485 */
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+/* Routed to J17 pin header */
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
new file mode 100644
index 0000000000000..72f12db8d53a7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
@@ -0,0 +1,43 @@
+/*
+ * NXP LPC435x, LPC433x, LPC4327, LPC4325, LPC4317 and LPC4315 SoC
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+/ {
+	compatible = "nxp,lpc4357";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-m4";
+		};
+	};
+
+	soc {
+		sram0: sram@10000000 {
+			compatible = "mmio-sram";
+			reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */
+		};
+
+		sram1: sram@10080000 {
+			compatible = "mmio-sram";
+			reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */
+		};
+
+		sram2: sram@20000000 {
+			compatible = "mmio-sram";
+			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+		};
+	};
+};
+
+&eeprom {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/ls/Makefile b/arch/arm/boot/dts/nxp/ls/Makefile
new file mode 100644
index 0000000000000..3cb1d516f6fb5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_LS1021A) += \
+	ls1021a-iot.dtb \
+	ls1021a-moxa-uc-8410a.dtb \
+	ls1021a-qds.dtb \
+	ls1021a-tsn.dtb \
+	ls1021a-twr.dtb
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts
new file mode 100644
index 0000000000000..ce8e26d7791f4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021-2022 NXP
+ *
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A-IOT Board";
+	compatible = "fsl,ls1021a-iot", "fsl,ls1021a";
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator-3V3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2V5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&can0{
+	status = "disabled";
+};
+
+&can1{
+	status = "disabled";
+};
+
+&can2{
+	status = "disabled";
+};
+
+&can3{
+	status = "okay";
+};
+
+&dcu {
+	display = <&display>;
+	status = "okay";
+
+	display: display@0 {
+		bits-per-pixel = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+
+			timing0: mode0 {
+				clock-frequency = <25000000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <80>;
+				hfront-porch = <80>;
+				vback-porch = <16>;
+				vfront-porch = <16>;
+				hsync-len = <12>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&phy1>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&phy3>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	fixed-link = <0 1 1000 0 0>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&esdhc{
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9555: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sgtl5000: audio-codec@2a {
+		#sound-dai-cells = <0x0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x2a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_2p5v>;
+		clocks = <&sys_mclk>;
+	};
+
+	max1239: adc@35 {
+		compatible = "maxim,max1239";
+		reg = <0x35>;
+		#io-channel-cells = <1>;
+	};
+
+	ina2201: core-monitor@44 {
+		compatible = "ti,ina220";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	ina2202: current-monitor@45 {
+		compatible = "ti,ina220";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	lm75b: thermal-monitor@48 {
+		compatible = "national,lm75b";
+		reg = <0x48>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	phy0: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <0x3>;
+	};
+
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&qspi {
+	num-cs = <2>;
+	status = "okay";
+
+	s25fl128s: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-moxa-uc-8410a.dts
new file mode 100644
index 0000000000000..d2cae8c7d7a61
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-moxa-uc-8410a.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Moxa Inc. - https://www.moxa.com/
+ *
+ * Author: Harry YJ Jhou (周亞諄) <harryyj.jhou@moxa.com>
+ *         Jimmy Chen (陳永達)    <jimmy.chen@moxa.com>
+ *         SZ Lin (林上智)        <sz.lin@moxa.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "ls1021a.dtsi"
+
+/ {
+	model = "Moxa UC-8410A";
+	compatible = "fsl,ls1021a-moxa-uc-8410a", "fsl,ls1021a";
+
+	aliases {
+		enet0_rgmii_phy = &rgmii_phy0;
+		enet1_rgmii_phy = &rgmii_phy1;
+		enet2_rgmii_phy = &rgmii_phy2;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		cel-pwr {
+			label = "UC8410A:CEL-PWR";
+			gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		cel-reset {
+			label = "UC8410A:CEL-RESET";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		str-led {
+			label = "UC8410A:RED:PROG";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		sw-ready {
+			label = "UC8410A:GREEN:SWRDY";
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		beeper {
+			label = "UC8410A:BEEP";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		prog-led0 {
+			label = "UC8410A:GREEN:PROG2";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		prog-led1 {
+			label = "UC8410A:GREEN:PROG1";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		prog-led2 {
+			label = "UC8410A:GREEN:PROG0";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		wifi-signal0 {
+			label = "UC8410A:GREEN:CEL2";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		wifi-signal1 {
+			label = "UC8410A:GREEN:CEL1";
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		wifi-signal2 {
+			label = "UC8410A:GREEN:CEL0";
+			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		cpu-diag-red {
+			label = "UC8410A:RED:DIA";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		cpu-diag-green {
+			label = "UC8410A:GREEN:DIA";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		cpu-diag-yellow {
+			label = "UC8410A:YELLOW:DIA";
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pushbtn-key {
+			label = "push button key";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			default-state = "on";
+		};
+	};
+};
+
+&enet0 {
+	phy-handle = <&rgmii_phy0>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&enet1 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	tpm@20 {
+		compatible = "infineon,slb9635tt";
+		reg = <0x20>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@0 {
+		compatible = "marvell,88e1118";
+		reg = <0x0>;
+		marvell,reg-init =
+			<3 0x11 0 0x4415>, /* Reg 3,17 */
+			<3 0x10 0 0x77>; /* Reg 3,16 */
+	};
+
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "marvell,88e1118";
+		reg = <0x1>;
+		marvell,reg-init =
+			<3 0x11 0 0x4415>, /* Reg 3,17 */
+			<3 0x10 0 0x77>; /* Reg 3,16 */
+	};
+
+	rgmii_phy2: ethernet-phy@2 {
+		compatible = "marvell,88e1118";
+		reg = <0x2>;
+		marvell,reg-init =
+			<3 0x11 0 0x4415>, /* Reg 3,17 */
+			<3 0x10 0 0x77>; /* Reg 3,16 */
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "spansion,s25fl064l", "spansion,s25fl164k";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+
+		partitions@0 {
+			label = "U-Boot";
+			reg = <0x0 0x180000>;
+		};
+
+		partitions@180000 {
+			label = "U-Boot Env";
+			reg = <0x180000 0x680000>;
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
new file mode 100644
index 0000000000000..f1acb97aee69b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A QDS Board";
+	compatible = "fsl,ls1021a-qds", "fsl,ls1021a";
+
+	aliases {
+		enet0_rgmii_phy = &rgmii_phy1;
+		enet1_rgmii_phy = &rgmii_phy2;
+		enet2_rgmii_phy = &rgmii_phy3;
+		enet0_sgmii_phy = &sgmii_phy1c;
+		enet1_sgmii_phy = &sgmii_phy1d;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: at45db021d@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1c>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1d>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy3>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547: mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ds3232: rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+
+			adt7461a@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			codec: sgtl5000@2a {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,sgtl5000";
+				reg = <0x2a>;
+				VDDA-supply = <&reg_3p3v>;
+				VDDIO-supply = <&reg_3p3v>;
+				clocks = <&sys_mclk>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>,
+		 <0x2 0x0 0x0 0x7e800000 0x00010000>,
+		 <0x3 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		big-endian;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x2 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-mfd";
+		reg = <0x3 0x0 0x0000100>;
+		bank-width = <1>;
+		device-width = <1>;
+		ranges = <0 3 0 0x100>;
+
+		mdio-mux-emi1 {
+			compatible = "mdio-mux-mmioreg";
+			mdio-parent-bus = <&mdio0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x54 1>; /* BRDCFG4 */
+			mux-mask = <0xe0>; /* EMI1[2:0] */
+
+			/* Onboard PHYs */
+			ls1021amdio0: mdio@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			ls1021amdio1: mdio@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+			};
+
+			ls1021amdio2: mdio@40 {
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy3: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+			};
+
+			ls1021amdio3: mdio@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sgmii_phy1c: ethernet-phy@1c {
+					reg = <0x1c>;
+				};
+			};
+
+			ls1021amdio4: mdio@80 {
+				reg = <0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sgmii_phy1d: ethernet-phy@1d {
+					reg = <0x1d>;
+				};
+			};
+		};
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	tbi0: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "disabled";
+};
+
+&can3 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
new file mode 100644
index 0000000000000..1ea32fff41201
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright 2016-2018 NXP Semiconductors
+ * Copyright 2019 Vladimir Oltean <olteanv@gmail.com>
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "NXP LS1021A-TSN Board";
+	compatible = "fsl,ls1021a-tsn", "fsl,ls1021a";
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_vdda_codec: regulator-3V3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vddio_codec: regulator-2V5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	/* ADG704BRMZ 1:4 SPI mux/demux */
+	sja1105: ethernet-switch@1 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,sja1105t";
+		/* 12 MHz */
+		spi-max-frequency = <12000000>;
+		/* Sample data on trailing clock edge */
+		spi-cpha;
+		/* SPI controller settings for SJA1105 timing requirements */
+		fsl,spi-cs-sck-delay = <1000>;
+		fsl,spi-sck-cs-delay = <1000>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				/* ETH5 written on chassis */
+				label = "swp5";
+				phy-handle = <&rgmii_phy6>;
+				phy-mode = "rgmii-id";
+				reg = <0>;
+			};
+
+			port@1 {
+				/* ETH2 written on chassis */
+				label = "swp2";
+				phy-handle = <&rgmii_phy3>;
+				phy-mode = "rgmii-id";
+				reg = <1>;
+			};
+
+			port@2 {
+				/* ETH3 written on chassis */
+				label = "swp3";
+				phy-handle = <&rgmii_phy4>;
+				phy-mode = "rgmii-id";
+				reg = <2>;
+			};
+
+			port@3 {
+				/* ETH4 written on chassis */
+				label = "swp4";
+				phy-handle = <&rgmii_phy5>;
+				phy-mode = "rgmii-id";
+				reg = <3>;
+			};
+
+			port@4 {
+				/* Internal port connected to eth2 */
+				ethernet = <&enet2>;
+				phy-mode = "rgmii";
+				rx-internal-delay-ps = <0>;
+				tx-internal-delay-ps = <0>;
+				reg = <4>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy2>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+/* RGMII delays added via PCB traces */
+&enet2 {
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* 3 axis accelerometer */
+	accelerometer@1e {
+		compatible = "fsl,fxls8471";
+		reg = <0x1e>;
+	};
+
+	/* Audio codec (SAI2) */
+	audio-codec@2a {
+		compatible = "fsl,sgtl5000";
+		VDDIO-supply = <&reg_vddio_codec>;
+		VDDA-supply = <&reg_vdda_codec>;
+		#sound-dai-cells = <0>;
+		clocks = <&sys_mclk>;
+		reg = <0x2a>;
+	};
+
+	/* Current sensing circuit for 1V VDDCORE PMIC rail */
+	current-sensor@44 {
+		compatible = "ti,ina220";
+		shunt-resistor = <1000>;
+		reg = <0x44>;
+	};
+
+	/* Current sensing circuit for 12V VCC rail */
+	current-sensor@45 {
+		compatible = "ti,ina220";
+		shunt-resistor = <1000>;
+		reg = <0x45>;
+	};
+
+	/* Thermal monitor - case */
+	temperature-sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	/* Thermal monitor - chip */
+	temperature-sensor@4c {
+		compatible = "ti,tmp451";
+		reg = <0x4c>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+	};
+
+	/* Unsupported devices:
+	 * - FXAS21002C Gyroscope at 0x20
+	 * - TI ADS7924 4-channel ADC at 0x49
+	 */
+};
+
+&ifc {
+	status = "disabled";
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&lpuart3 {
+	status = "okay";
+};
+
+&mdio0 {
+	/* AR8031 */
+	sgmii_phy1: ethernet-phy@1 {
+		reg = <0x1>;
+		/* SGMII1_PHY_INT_B: connected to IRQ2, active low */
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/* AR8031 */
+	sgmii_phy2: ethernet-phy@2 {
+		reg = <0x2>;
+		/* SGMII2_PHY_INT_B: connected to IRQ2, active low */
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/* BCM5464 quad PHY */
+	rgmii_phy3: ethernet-phy@3 {
+		reg = <0x3>;
+	};
+
+	rgmii_phy4: ethernet-phy@4 {
+		reg = <0x4>;
+	};
+
+	rgmii_phy5: ethernet-phy@5 {
+		reg = <0x5>;
+	};
+
+	rgmii_phy6: ethernet-phy@6 {
+		reg = <0x6>;
+	};
+
+	/* SGMII PCS for enet0 */
+	tbi0: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
+	/* SGMII PCS for enet1 */
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "RCW";
+				reg = <0x0 0x40000>;
+			};
+
+			partition@40000 {
+				label = "U-Boot";
+				reg = <0x40000 0x300000>;
+			};
+
+			partition@340000 {
+				label = "U-Boot Env";
+				reg = <0x340000 0x100000>;
+			};
+		};
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
new file mode 100644
index 0000000000000..f5c03871b2050
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A TWR Board";
+	compatible = "fsl,ls1021a-twr", "fsl,ls1021a";
+
+	aliases {
+		enet2_rgmii_phy = &rgmii_phy1;
+		enet0_sgmii_phy = &sgmii_phy2;
+		enet1_sgmii_phy = &sgmii_phy0;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	panel: panel {
+		compatible = "nec,nl4827hc19-05b";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
+	};
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&dspi1 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: s25fl064k@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl064k";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy2>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy0>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	ina220@41 {
+		compatible = "ti,ina220";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+};
+
+&i2c1 {
+	status = "okay";
+	codec: sgtl5000@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&sys_mclk>;
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR Flash on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		big-endian;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	sgmii_phy0: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+	rgmii_phy1: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+	sgmii_phy2: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+	tbi0: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&esdhc {
+        status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	n25q128a130: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
+&sai1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "disabled";
+};
+
+&can3 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
new file mode 100644
index 0000000000000..49c78c84cd5df
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
@@ -0,0 +1,987 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		crypto = &crypto;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		rtc1 = &ftm_alarm0;
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+		serial4 = &lpuart4;
+		serial5 = &lpuart5;
+		sysclk = &sysclk;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf00>;
+			clocks = <&clockgen 1 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@f01 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf01>;
+			clocks = <&clockgen 1 0>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		device_type = "soc";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+
+		gic: interrupt-controller@1400000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x1401000 0x0 0x1000>,
+			      <0x0 0x1402000 0x0 0x2000>,
+			      <0x0 0x1404000 0x0 0x2000>,
+			      <0x0 0x1406000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+
+		};
+
+		msi1: msi-controller@1570e00 {
+			compatible = "fsl,ls1021a-msi";
+			reg = <0x0 0x1570e00 0x0 0x8>;
+			msi-controller;
+			interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		msi2: msi-controller@1570e08 {
+			compatible = "fsl,ls1021a-msi";
+			reg = <0x0 0x1570e08 0x0 0x8>;
+			msi-controller;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ifc: memory-controller@1530000 {
+			compatible = "fsl,ifc";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1021a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen 4 3>;
+			clock-names = "sfp";
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1021a-dcfg", "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
+			big-endian;
+		};
+
+		qspi: spi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+			      <0x0 0x40000000 0x0 0x20000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1021a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+			      <0x0 0x20220520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1021a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1570000 0x10000>;
+
+			extirq: interrupt-controller@1ac {
+				compatible = "fsl,ls1021a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x1ac 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0x7 0x0>;
+			};
+		};
+
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <7>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg		 = <0x0 0x1700000 0x0 0x100000>;
+			ranges		 = <0x0 0x0 0x1700000 0x100000>;
+			interrupts	 = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+		};
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1021a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;
+			fsl,tmu-calibration = <0x00000000 0x00000020>,
+					      <0x00000001 0x00000024>,
+					      <0x00000002 0x0000002a>,
+					      <0x00000003 0x00000032>,
+					      <0x00000004 0x00000038>,
+					      <0x00000005 0x0000003e>,
+					      <0x00000006 0x00000043>,
+					      <0x00000007 0x0000004a>,
+					      <0x00000008 0x00000050>,
+					      <0x00000009 0x00000059>,
+					      <0x0000000a 0x0000005f>,
+					      <0x0000000b 0x00000066>,
+
+					      <0x00010000 0x00000023>,
+					      <0x00010001 0x0000002b>,
+					      <0x00010002 0x00000033>,
+					      <0x00010003 0x0000003a>,
+					      <0x00010004 0x00000042>,
+					      <0x00010005 0x0000004a>,
+					      <0x00010006 0x00000054>,
+					      <0x00010007 0x0000005c>,
+					      <0x00010008 0x00000065>,
+					      <0x00010009 0x0000006f>,
+
+					      <0x00020000 0x00000029>,
+					      <0x00020001 0x00000033>,
+					      <0x00020002 0x0000003d>,
+					      <0x00020003 0x00000048>,
+					      <0x00020004 0x00000054>,
+					      <0x00020005 0x00000060>,
+					      <0x00020006 0x0000006c>,
+
+					      <0x00030000 0x00000025>,
+					      <0x00030001 0x00000033>,
+					      <0x00030002 0x00000043>,
+					      <0x00030003 0x00000055>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		dspi0: spi@2100000 {
+			compatible = "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 38>, <&edma0 1 39>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 36>, <&edma0 1 37>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 34>, <&edma0 1 35>;
+			status = "disabled";
+		};
+
+		uart0: serial@21c0500 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x0 0x21c0500 0x0 0x100>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		uart1: serial@21c0600 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x0 0x21c0600 0x0 0x100>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		uart2: serial@21d0500 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		uart3: serial@21d0600 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		counter0: counter@29d0000 {
+			compatible = "fsl,ftm-quaddec";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			big-endian;
+			status = "disabled";
+		};
+
+		counter1: counter@29e0000 {
+			compatible = "fsl,ftm-quaddec";
+			reg = <0x0 0x29e0000 0x0 0x10000>;
+			big-endian;
+			status = "disabled";
+		};
+
+		counter2: counter@29f0000 {
+			compatible = "fsl,ftm-quaddec";
+			reg = <0x0 0x29f0000 0x0 0x10000>;
+			big-endian;
+			status = "disabled";
+		};
+
+		counter3: counter@2a00000 {
+			compatible = "fsl,ftm-quaddec";
+			reg = <0x0 0x2a00000 0x0 0x10000>;
+			big-endian;
+			status = "disabled";
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		pwm0: pwm@29d0000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm1: pwm@29e0000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x29e0000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm2: pwm@29f0000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x29f0000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm3: pwm@2a00000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2a00000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm4: pwm@2a10000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2a10000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm5: pwm@2a20000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2a20000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm6: pwm@2a30000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2a30000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm7: pwm@2a40000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2a40000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		wdog0: watchdog@2ad0000 {
+			compatible = "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "wdog-en";
+			big-endian;
+		};
+
+		sai1: sai@2b50000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0x2b50000 0x0 0x10000>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 47>,
+			       <&edma0 1 46>;
+			status = "disabled";
+		};
+
+		sai2: sai@2b60000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0x2b60000 0x0 0x10000>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 45>,
+			       <&edma0 1 44>;
+			status = "disabled";
+		};
+
+		edma0: dma-controller@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen 4 1>,
+				 <&clockgen 4 1>;
+		};
+
+		dcu: dcu@2ce0000 {
+			compatible = "fsl,ls1021a-dcu";
+			reg = <0x0 0x2ce0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 0>,
+				<&clockgen 4 0>;
+			clock-names = "dcu", "pix";
+			big-endian;
+			status = "disabled";
+		};
+
+		mdio0: mdio@2d24000 {
+			compatible = "gianfar";
+			device_type = "mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2d24000 0x0 0x4000>,
+			      <0x0 0x2d10030 0x0 0x4>;
+		};
+
+		mdio1: mdio@2d64000 {
+			compatible = "gianfar";
+			device_type = "mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2d64000 0x0 0x4000>,
+			      <0x0 0x2d50030 0x0 0x4>;
+		};
+
+		ptp_clock@2d10e00 {
+			compatible = "fsl,etsec-ptp";
+			reg = <0x0 0x2d10e00 0x0 0xb0>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,tclk-period = <5>;
+			fsl,tmr-prsc    = <2>;
+			fsl,tmr-add     = <0xaaaaaaab>;
+			fsl,tmr-fiper1  = <999999995>;
+			fsl,tmr-fiper2  = <999999995>;
+			fsl,max-adj     = <499999999>;
+			fsl,extts-fifo;
+		};
+
+		enet0: ethernet@2d10000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			fsl,magic-packet;
+			ranges;
+			dma-coherent;
+
+			queue-group@2d10000 {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d10000 0x0 0x1000>;
+				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			queue-group@2d14000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d14000 0x0 0x1000>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		enet1: ethernet@2d50000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			ranges;
+			dma-coherent;
+
+			queue-group@2d50000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d50000 0x0 0x1000>;
+				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			queue-group@2d54000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d54000 0x0 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		enet2: ethernet@2d90000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			ranges;
+			dma-coherent;
+
+			queue-group@2d90000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d90000 0x0 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			queue-group@2d94000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d94000 0x0 0x1000>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		usb2: usb@8600000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			reg = <0x0 0x8600000 0x0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		usb3: usb@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+		};
+
+		pcie@3400000 {
+			compatible = "fsl,ls1021a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */
+			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			fsl,pcie-scfg = <&scfg 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls1021a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */
+			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,pcie-scfg = <&scfg 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		can0: can@2a70000 {
+			compatible = "fsl,ls1021ar2-flexcan";
+			reg = <0x0 0x2a70000 0x0 0x1000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			big-endian;
+			status = "disabled";
+		};
+
+		can1: can@2a80000 {
+			compatible = "fsl,ls1021ar2-flexcan";
+			reg = <0x0 0x2a80000 0x0 0x1000>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			big-endian;
+			status = "disabled";
+		};
+
+		can2: can@2a90000 {
+			compatible = "fsl,ls1021ar2-flexcan";
+			reg = <0x0 0x2a90000 0x0 0x1000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			big-endian;
+			status = "disabled";
+		};
+
+		can3: can@2aa0000 {
+			compatible = "fsl,ls1021ar2-flexcan";
+			reg = <0x0 0x2aa0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			big-endian;
+			status = "disabled";
+		};
+
+		ocram1: sram@10000000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0x10000000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x10000000 0x10000>;
+		};
+
+		ocram2: sram@10010000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0x10010000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x10010000 0x10000>;
+		};
+
+		qdma: dma-controller@8390000 {
+			compatible = "fsl,ls1021a-qdma";
+			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
+			      <0x0 0x838a000 0x0 0x2000>; /* Block regs */
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error",
+				"qdma-queue0", "qdma-queue1";
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x1000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x8>;
+			#fsl,rcpm-wakeup-cells = <2>;
+			#power-domain-cells = <0>;
+		};
+
+		ftm_alarm0: timer0@29d0000 {
+			compatible = "fsl,ls1021a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			reg-names = "ftm";
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/Makefile b/arch/arm/boot/dts/nxp/mxs/Makefile
new file mode 100644
index 0000000000000..a430d04f9c693
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/Makefile
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MXS) += \
+	imx23-evk.dtb \
+	imx23-olinuxino.dtb \
+	imx23-sansa.dtb \
+	imx23-stmp378x_devb.dtb \
+	imx23-xfi3.dtb \
+	imx28-apf28.dtb \
+	imx28-apf28dev.dtb \
+	imx28-apx4devkit.dtb \
+	imx28-cfa10036.dtb \
+	imx28-cfa10037.dtb \
+	imx28-cfa10049.dtb \
+	imx28-cfa10055.dtb \
+	imx28-cfa10056.dtb \
+	imx28-cfa10057.dtb \
+	imx28-cfa10058.dtb \
+	imx28-duckbill-2-485.dtb \
+	imx28-duckbill-2.dtb \
+	imx28-duckbill-2-enocean.dtb \
+	imx28-duckbill-2-spi.dtb \
+	imx28-duckbill.dtb \
+	imx28-eukrea-mbmx283lc.dtb \
+	imx28-eukrea-mbmx287lc.dtb \
+	imx28-evk.dtb \
+	imx28-m28cu3.dtb \
+	imx28-m28evk.dtb \
+	imx28-sps1.dtb \
+	imx28-ts4600.dtb \
+	imx28-tx28.dtb \
+	imx28-xea.dtb
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts b/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts
new file mode 100644
index 0000000000000..3b609d987d883
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "Freescale i.MX23 Evaluation Kit";
+	compatible = "fsl,imx23-evk", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 0>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 18 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			nand-controller@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
+				status = "okay";
+			};
+
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				wp-gpios = <&gpio1 30 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_LCD_RESET__GPIO_1_18
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a>;
+				status = "okay";
+
+				port {
+					display_out: endpoint {
+						remote-endpoint = <&panel_in>;
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
+		};
+	};
+
+	backlight_display: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts
new file mode 100644
index 0000000000000..0729e72f22832
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx23.dtsi"
+
+/ {
+	model = "i.MX23 Olinuxino Low Cost Board";
+	compatible = "olimex,imx23-olinuxino", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+				bus-width = <4>;
+				broken-cd;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_ALE__GPIO_0_17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pin_gpio2_1: led_gpio2_1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DETECT__GPIO_2_1
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			ssp1: spi@80034000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
+			i2c: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c_pins_b>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			dr_mode = "host";
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
+			gpio = <&gpio0 17 0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio2_1>;
+
+		user {
+			label = "green";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-pinfunc.h b/arch/arm/boot/dts/nxp/mxs/imx23-pinfunc.h
new file mode 100644
index 0000000000000..468c079f3c2b2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-pinfunc.h
@@ -0,0 +1,327 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Header providing constants for i.MX23 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+#ifndef __DT_BINDINGS_MX23_PINCTRL_H__
+#define __DT_BINDINGS_MX23_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX23_PAD_GPMI_D00__GPMI_D00			0x0000
+#define MX23_PAD_GPMI_D01__GPMI_D01			0x0010
+#define MX23_PAD_GPMI_D02__GPMI_D02			0x0020
+#define MX23_PAD_GPMI_D03__GPMI_D03			0x0030
+#define MX23_PAD_GPMI_D04__GPMI_D04			0x0040
+#define MX23_PAD_GPMI_D05__GPMI_D05			0x0050
+#define MX23_PAD_GPMI_D06__GPMI_D06			0x0060
+#define MX23_PAD_GPMI_D07__GPMI_D07			0x0070
+#define MX23_PAD_GPMI_D08__GPMI_D08			0x0080
+#define MX23_PAD_GPMI_D09__GPMI_D09			0x0090
+#define MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
+#define MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
+#define MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
+#define MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
+#define MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
+#define MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
+#define MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
+#define MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
+#define MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
+#define MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
+#define MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
+#define MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
+#define MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
+#define MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
+#define MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
+#define MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
+#define MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
+#define MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
+#define MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
+#define MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
+#define MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
+#define MX23_PAD_LCD_D00__LCD_D00			0x1000
+#define MX23_PAD_LCD_D01__LCD_D01			0x1010
+#define MX23_PAD_LCD_D02__LCD_D02			0x1020
+#define MX23_PAD_LCD_D03__LCD_D03			0x1030
+#define MX23_PAD_LCD_D04__LCD_D04			0x1040
+#define MX23_PAD_LCD_D05__LCD_D05			0x1050
+#define MX23_PAD_LCD_D06__LCD_D06			0x1060
+#define MX23_PAD_LCD_D07__LCD_D07			0x1070
+#define MX23_PAD_LCD_D08__LCD_D08			0x1080
+#define MX23_PAD_LCD_D09__LCD_D09			0x1090
+#define MX23_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX23_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX23_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX23_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX23_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX23_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX23_PAD_LCD_D16__LCD_D16			0x1100
+#define MX23_PAD_LCD_D17__LCD_D17			0x1110
+#define MX23_PAD_LCD_RESET__LCD_RESET			0x1120
+#define MX23_PAD_LCD_RS__LCD_RS				0x1130
+#define MX23_PAD_LCD_WR__LCD_WR				0x1140
+#define MX23_PAD_LCD_CS__LCD_CS				0x1150
+#define MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
+#define MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
+#define MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
+#define MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
+#define MX23_PAD_PWM0__PWM0				0x11a0
+#define MX23_PAD_PWM1__PWM1				0x11b0
+#define MX23_PAD_PWM2__PWM2				0x11c0
+#define MX23_PAD_PWM3__PWM3				0x11d0
+#define MX23_PAD_PWM4__PWM4				0x11e0
+#define MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
+#define MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
+#define MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
+#define MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
+#define MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
+#define MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
+#define MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
+#define MX23_PAD_ROTARYA__ROTARYA			0x2070
+#define MX23_PAD_ROTARYB__ROTARYB			0x2080
+#define MX23_PAD_EMI_A00__EMI_A00			0x2090
+#define MX23_PAD_EMI_A01__EMI_A01			0x20a0
+#define MX23_PAD_EMI_A02__EMI_A02			0x20b0
+#define MX23_PAD_EMI_A03__EMI_A03			0x20c0
+#define MX23_PAD_EMI_A04__EMI_A04			0x20d0
+#define MX23_PAD_EMI_A05__EMI_A05			0x20e0
+#define MX23_PAD_EMI_A06__EMI_A06			0x20f0
+#define MX23_PAD_EMI_A07__EMI_A07			0x2100
+#define MX23_PAD_EMI_A08__EMI_A08			0x2110
+#define MX23_PAD_EMI_A09__EMI_A09			0x2120
+#define MX23_PAD_EMI_A10__EMI_A10			0x2130
+#define MX23_PAD_EMI_A11__EMI_A11			0x2140
+#define MX23_PAD_EMI_A12__EMI_A12			0x2150
+#define MX23_PAD_EMI_BA0__EMI_BA0			0x2160
+#define MX23_PAD_EMI_BA1__EMI_BA1			0x2170
+#define MX23_PAD_EMI_CASN__EMI_CASN			0x2180
+#define MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
+#define MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
+#define MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
+#define MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
+#define MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
+#define MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
+#define MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
+#define MX23_PAD_EMI_D00__EMI_D00			0x3000
+#define MX23_PAD_EMI_D01__EMI_D01			0x3010
+#define MX23_PAD_EMI_D02__EMI_D02			0x3020
+#define MX23_PAD_EMI_D03__EMI_D03			0x3030
+#define MX23_PAD_EMI_D04__EMI_D04			0x3040
+#define MX23_PAD_EMI_D05__EMI_D05			0x3050
+#define MX23_PAD_EMI_D06__EMI_D06			0x3060
+#define MX23_PAD_EMI_D07__EMI_D07			0x3070
+#define MX23_PAD_EMI_D08__EMI_D08			0x3080
+#define MX23_PAD_EMI_D09__EMI_D09			0x3090
+#define MX23_PAD_EMI_D10__EMI_D10			0x30a0
+#define MX23_PAD_EMI_D11__EMI_D11			0x30b0
+#define MX23_PAD_EMI_D12__EMI_D12			0x30c0
+#define MX23_PAD_EMI_D13__EMI_D13			0x30d0
+#define MX23_PAD_EMI_D14__EMI_D14			0x30e0
+#define MX23_PAD_EMI_D15__EMI_D15			0x30f0
+#define MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
+#define MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
+#define MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
+#define MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
+#define MX23_PAD_EMI_CLK__EMI_CLK			0x3140
+#define MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
+#define MX23_PAD_GPMI_D00__LCD_D8			0x0001
+#define MX23_PAD_GPMI_D01__LCD_D9			0x0011
+#define MX23_PAD_GPMI_D02__LCD_D10			0x0021
+#define MX23_PAD_GPMI_D03__LCD_D11			0x0031
+#define MX23_PAD_GPMI_D04__LCD_D12			0x0041
+#define MX23_PAD_GPMI_D05__LCD_D13			0x0051
+#define MX23_PAD_GPMI_D06__LCD_D14			0x0061
+#define MX23_PAD_GPMI_D07__LCD_D15			0x0071
+#define MX23_PAD_GPMI_D08__LCD_D18			0x0081
+#define MX23_PAD_GPMI_D09__LCD_D19			0x0091
+#define MX23_PAD_GPMI_D10__LCD_D20			0x00a1
+#define MX23_PAD_GPMI_D11__LCD_D21			0x00b1
+#define MX23_PAD_GPMI_D12__LCD_D22			0x00c1
+#define MX23_PAD_GPMI_D13__LCD_D23			0x00d1
+#define MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
+#define MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
+#define MX23_PAD_GPMI_CLE__LCD_D16			0x0101
+#define MX23_PAD_GPMI_ALE__LCD_D17			0x0111
+#define MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
+#define MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
+#define MX23_PAD_AUART1_RX__IR_RX			0x01c1
+#define MX23_PAD_AUART1_TX__IR_TX			0x01d1
+#define MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
+#define MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
+#define MX23_PAD_LCD_D00__ETM_DA8			0x1001
+#define MX23_PAD_LCD_D01__ETM_DA9			0x1011
+#define MX23_PAD_LCD_D02__ETM_DA10			0x1021
+#define MX23_PAD_LCD_D03__ETM_DA11			0x1031
+#define MX23_PAD_LCD_D04__ETM_DA12			0x1041
+#define MX23_PAD_LCD_D05__ETM_DA13			0x1051
+#define MX23_PAD_LCD_D06__ETM_DA14			0x1061
+#define MX23_PAD_LCD_D07__ETM_DA15			0x1071
+#define MX23_PAD_LCD_D08__ETM_DA0			0x1081
+#define MX23_PAD_LCD_D09__ETM_DA1			0x1091
+#define MX23_PAD_LCD_D10__ETM_DA2			0x10a1
+#define MX23_PAD_LCD_D11__ETM_DA3			0x10b1
+#define MX23_PAD_LCD_D12__ETM_DA4			0x10c1
+#define MX23_PAD_LCD_D13__ETM_DA5			0x10d1
+#define MX23_PAD_LCD_D14__ETM_DA6			0x10e1
+#define MX23_PAD_LCD_D15__ETM_DA7			0x10f1
+#define MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
+#define MX23_PAD_LCD_RS__ETM_TCLK			0x1131
+#define MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
+#define MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
+#define MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
+#define MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
+#define MX23_PAD_PWM0__ROTARYA				0x11a1
+#define MX23_PAD_PWM1__ROTARYB				0x11b1
+#define MX23_PAD_PWM2__GPMI_RDY3			0x11c1
+#define MX23_PAD_PWM3__ETM_TCTL				0x11d1
+#define MX23_PAD_PWM4__ETM_TCLK				0x11e1
+#define MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
+#define MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
+#define MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
+#define MX23_PAD_ROTARYA__AUART2_RTS			0x2071
+#define MX23_PAD_ROTARYB__AUART2_CTS			0x2081
+#define MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
+#define MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
+#define MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
+#define MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
+#define MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
+#define MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
+#define MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
+#define MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
+#define MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
+#define MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
+#define MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
+#define MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
+#define MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
+#define MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
+#define MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
+#define MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
+#define MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
+#define MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
+#define MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
+#define MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
+#define MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
+#define MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
+#define MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
+#define MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
+#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
+#define MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
+#define MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
+#define MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
+#define MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
+#define MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
+#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
+#define MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
+#define MX23_PAD_PWM0__DUART_RX				0x11a2
+#define MX23_PAD_PWM1__DUART_TX				0x11b2
+#define MX23_PAD_PWM3__AUART1_CTS			0x11d2
+#define MX23_PAD_PWM4__AUART1_RTS			0x11e2
+#define MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
+#define MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
+#define MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
+#define MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
+#define MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
+#define MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
+#define MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
+#define MX23_PAD_ROTARYA__SPDIF				0x2072
+#define MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
+#define MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
+#define MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
+#define MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
+#define MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
+#define MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
+#define MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
+#define MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
+#define MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
+#define MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
+#define MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
+#define MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
+#define MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
+#define MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
+#define MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
+#define MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
+#define MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
+#define MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
+#define MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
+#define MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
+#define MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
+#define MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
+#define MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
+#define MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
+#define MX23_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX23_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX23_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX23_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX23_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX23_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX23_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX23_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX23_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX23_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX23_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX23_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
+#define MX23_PAD_LCD_RS__GPIO_1_19			0x1133
+#define MX23_PAD_LCD_WR__GPIO_1_20			0x1143
+#define MX23_PAD_LCD_CS__GPIO_1_21			0x1153
+#define MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
+#define MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
+#define MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
+#define MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
+#define MX23_PAD_PWM0__GPIO_1_26			0x11a3
+#define MX23_PAD_PWM1__GPIO_1_27			0x11b3
+#define MX23_PAD_PWM2__GPIO_1_28			0x11c3
+#define MX23_PAD_PWM3__GPIO_1_29			0x11d3
+#define MX23_PAD_PWM4__GPIO_1_30			0x11e3
+#define MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
+#define MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
+#define MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
+#define MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
+#define MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
+#define MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
+#define MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
+#define MX23_PAD_ROTARYA__GPIO_2_7			0x2073
+#define MX23_PAD_ROTARYB__GPIO_2_8			0x2083
+#define MX23_PAD_EMI_A00__GPIO_2_9			0x2093
+#define MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
+#define MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
+#define MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
+#define MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
+#define MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
+#define MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
+#define MX23_PAD_EMI_A07__GPIO_2_16			0x2103
+#define MX23_PAD_EMI_A08__GPIO_2_17			0x2113
+#define MX23_PAD_EMI_A09__GPIO_2_18			0x2123
+#define MX23_PAD_EMI_A10__GPIO_2_19			0x2133
+#define MX23_PAD_EMI_A11__GPIO_2_20			0x2143
+#define MX23_PAD_EMI_A12__GPIO_2_21			0x2153
+#define MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
+#define MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
+#define MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
+#define MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
+#define MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
+#define MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
+#define MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
+#define MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
+#define MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
+#define MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
+
+#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
new file mode 100644
index 0000000000000..46057d9bf555b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx23.dtsi"
+
+/ {
+	model = "SanDisk Sansa Fuze+";
+	compatible = "sandisk,sansa_fuze_plus", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				cd-inverted;
+				status = "okay";
+			};
+
+			ssp1: spi@80034000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc1_8bit_pins_a>;
+				bus-width = <8>;
+				vmmc-supply = <&reg_vddio_sd1>;
+				non-removable;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D08__GPIO_0_8
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_AUART1_RTS__GPIO_0_27
+						MX23_PAD_AUART1_CTS__GPIO_0_26
+						MX23_PAD_I2C_SCL__I2C_SCL
+						MX23_PAD_I2C_SDA__I2C_SDA
+						MX23_PAD_LCD_DOTCK__GPIO_1_22
+						MX23_PAD_LCD_HSYNC__GPIO_1_24
+						MX23_PAD_PWM3__GPIO_1_29
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			dr_mode = "peripheral";
+			status = "okay";
+		};
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 8 0>;
+	};
+
+	reg_vddio_sd1: regulator-vddio-sd1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 0>;
+	};
+
+	reg_vdd_touchpad: regulator-vdd-touchpad0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-touchpad0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	reg_vdd_tuner: regulator-vdd-tuner0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-tuner0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	i2c-0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <
+			&gpio1 24 0		/* SDA */
+			&gpio1 22 0		/* SCL */
+		>;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+	};
+
+	i2c-1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <
+			&gpio0 31 0		/* SDA */
+			&gpio0 30 0		/* SCL */
+		>;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+
+		touch: touch@20 {
+			compatible = "synaptics,synaptics_i2c";
+			reg = <0x20>;
+		};
+
+		eeprom: eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			pagesize = <32>;
+		};
+	};
+
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts
new file mode 100644
index 0000000000000..da4b88f32eaa4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "Freescale STMP378x Development Board";
+	compatible = "fsl,stmp378x-devb", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				wp-gpios = <&gpio1 30 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_vddio_sd0: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 29 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
new file mode 100644
index 0000000000000..b1d8210f3ecc8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "Creative ZEN X-Fi3";
+	compatible = "creative,x-fi3", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				cd-inverted;
+				status = "okay";
+			};
+
+			ssp1: spi@80034000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc1_4bit_pins_a>;
+				bus-width = <4>;
+				non-removable;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				key_pins_a: keys@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_ROTARYA__GPIO_2_7
+						MX23_PAD_ROTARYB__GPIO_2_8
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c_pins_a>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_2pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			dr_mode = "peripheral";
+			status = "okay";
+		};
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 7 0>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		key-voldown {
+			label = "volume-down";
+			linux,code = <114>;
+			gpios = <&gpio2 7 0>;
+			debounce-interval = <20>;
+		};
+
+		key-volup {
+			label = "volume-up";
+			linux,code = <115>;
+			gpios = <&gpio2 8 0>;
+			debounce-interval = <20>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
new file mode 100644
index 0000000000000..a3668a0827fc8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
@@ -0,0 +1,634 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+#include "imx23-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		serial0 = &auart0;
+		serial1 = &auart1;
+		spi0 = &ssp0;
+		spi1 = &ssp1;
+		usbphy0 = &usbphy0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	apb@80000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x80000>;
+		ranges;
+
+		apbh@80000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x40000>;
+			ranges;
+
+			icoll: interrupt-controller@80000000 {
+				compatible = "fsl,imx23-icoll", "fsl,icoll";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x80000000 0x2000>;
+			};
+
+			dma_apbh: dma-controller@80004000 {
+				compatible = "fsl,imx23-dma-apbh";
+				reg = <0x80004000 0x2000>;
+				interrupts = <0 14 20 0
+					      13 13 13 13>;
+				#dma-cells = <1>;
+				dma-channels = <8>;
+				clocks = <&clks 15>;
+			};
+
+			ecc@80008000 {
+				reg = <0x80008000 0x2000>;
+				status = "disabled";
+			};
+
+			nand-controller@8000c000 {
+				compatible = "fsl,imx23-gpmi-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+				reg-names = "gpmi-nand", "bch";
+				interrupts = <56>;
+				interrupt-names = "bch";
+				clocks = <&clks 34>;
+				clock-names = "gpmi_io";
+				dmas = <&dma_apbh 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp0: spi@80010000 {
+				reg = <0x80010000 0x2000>;
+				interrupts = <15>;
+				clocks = <&clks 33>;
+				dmas = <&dma_apbh 1>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			etm@80014000 {
+				reg = <0x80014000 0x2000>;
+				status = "disabled";
+			};
+
+			pinctrl@80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-pinctrl", "simple-bus";
+				reg = <0x80018000 0x2000>;
+
+				gpio0: gpio@0 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <0>;
+					interrupts = <16>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio1: gpio@1 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <1>;
+					interrupts = <17>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@2 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <2>;
+					interrupts = <18>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				duart_pins_a: duart@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_PWM0__DUART_RX
+						MX23_PAD_PWM1__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart0_pins_a: auart0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_AUART1_RX__AUART1_RX
+						MX23_PAD_AUART1_TX__AUART1_TX
+						MX23_PAD_AUART1_CTS__AUART1_CTS
+						MX23_PAD_AUART1_RTS__AUART1_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart0_2pins_a: auart0-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_I2C_SCL__AUART1_TX
+						MX23_PAD_I2C_SDA__AUART1_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart1_2pins_a: auart1-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D14__AUART2_RX
+						MX23_PAD_GPMI_D15__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_a: gpmi-nand@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__GPMI_D00
+						MX23_PAD_GPMI_D01__GPMI_D01
+						MX23_PAD_GPMI_D02__GPMI_D02
+						MX23_PAD_GPMI_D03__GPMI_D03
+						MX23_PAD_GPMI_D04__GPMI_D04
+						MX23_PAD_GPMI_D05__GPMI_D05
+						MX23_PAD_GPMI_D06__GPMI_D06
+						MX23_PAD_GPMI_D07__GPMI_D07
+						MX23_PAD_GPMI_CLE__GPMI_CLE
+						MX23_PAD_GPMI_ALE__GPMI_ALE
+						MX23_PAD_GPMI_RDY0__GPMI_RDY0
+						MX23_PAD_GPMI_RDY1__GPMI_RDY1
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
+						MX23_PAD_GPMI_CE1N__GPMI_CE1N
+						MX23_PAD_GPMI_CE0N__GPMI_CE0N
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_fixup: gpmi-pins-fixup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+				};
+
+				mmc0_4bit_pins_a: mmc0-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_8bit_pins_a: mmc0-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_GPMI_D08__SSP1_DATA4
+						MX23_PAD_GPMI_D09__SSP1_DATA5
+						MX23_PAD_GPMI_D10__SSP1_DATA6
+						MX23_PAD_GPMI_D11__SSP1_DATA7
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_pins_fixup: mmc0-pins-fixup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc0_sck_cfg: mmc0-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_4bit_pins_a: mmc1-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D01__SSP2_DATA1
+						MX23_PAD_GPMI_D02__SSP2_DATA2
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc1_8bit_pins_a: mmc1-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D01__SSP2_DATA1
+						MX23_PAD_GPMI_D02__SSP2_DATA2
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+						MX23_PAD_GPMI_D04__SSP2_DATA4
+						MX23_PAD_GPMI_D05__SSP2_DATA5
+						MX23_PAD_GPMI_D06__SSP2_DATA6
+						MX23_PAD_GPMI_D07__SSP2_DATA7
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				pwm2_pins_a: pwm2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_PWM2__PWM2
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_24bit_pins_a: lcdif-24bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_LCD_D00__LCD_D00
+						MX23_PAD_LCD_D01__LCD_D01
+						MX23_PAD_LCD_D02__LCD_D02
+						MX23_PAD_LCD_D03__LCD_D03
+						MX23_PAD_LCD_D04__LCD_D04
+						MX23_PAD_LCD_D05__LCD_D05
+						MX23_PAD_LCD_D06__LCD_D06
+						MX23_PAD_LCD_D07__LCD_D07
+						MX23_PAD_LCD_D08__LCD_D08
+						MX23_PAD_LCD_D09__LCD_D09
+						MX23_PAD_LCD_D10__LCD_D10
+						MX23_PAD_LCD_D11__LCD_D11
+						MX23_PAD_LCD_D12__LCD_D12
+						MX23_PAD_LCD_D13__LCD_D13
+						MX23_PAD_LCD_D14__LCD_D14
+						MX23_PAD_LCD_D15__LCD_D15
+						MX23_PAD_LCD_D16__LCD_D16
+						MX23_PAD_LCD_D17__LCD_D17
+						MX23_PAD_GPMI_D08__LCD_D18
+						MX23_PAD_GPMI_D09__LCD_D19
+						MX23_PAD_GPMI_D10__LCD_D20
+						MX23_PAD_GPMI_D11__LCD_D21
+						MX23_PAD_GPMI_D12__LCD_D22
+						MX23_PAD_GPMI_D13__LCD_D23
+						MX23_PAD_LCD_DOTCK__LCD_DOTCK
+						MX23_PAD_LCD_ENABLE__LCD_ENABLE
+						MX23_PAD_LCD_HSYNC__LCD_HSYNC
+						MX23_PAD_LCD_VSYNC__LCD_VSYNC
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				spi2_pins_a: spi2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c_pins_a: i2c@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_I2C_SCL__I2C_SCL
+						MX23_PAD_I2C_SDA__I2C_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c_pins_b: i2c@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX23_PAD_LCD_ENABLE__I2C_SCL
+						MX23_PAD_LCD_HSYNC__I2C_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c_pins_c: i2c@2 {
+					reg = <2>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DATA1__I2C_SCL
+						MX23_PAD_SSP1_DATA2__I2C_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+			};
+
+			digctl@8001c000 {
+				compatible = "fsl,imx23-digctl";
+				reg = <0x8001c000 2000>;
+				status = "disabled";
+			};
+
+			emi@80020000 {
+				reg = <0x80020000 0x2000>;
+				status = "disabled";
+			};
+
+			dma_apbx: dma-apbx@80024000 {
+				compatible = "fsl,imx23-dma-apbx";
+				reg = <0x80024000 0x2000>;
+				interrupts = <7 5 9 26
+					      19 0 25 23
+					      60 58 9 0
+					      0 0 0 0>;
+				interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
+						  "saif0", "empty", "auart0-rx", "auart0-tx",
+						  "auart1-rx", "auart1-tx", "saif1", "empty",
+						  "empty", "empty", "empty", "empty";
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 16>;
+			};
+
+			dcp: crypto@80028000 {
+				compatible = "fsl,imx23-dcp";
+				reg = <0x80028000 0x2000>;
+				interrupts = <53 54>;
+				status = "okay";
+			};
+
+			pxp@8002a000 {
+				reg = <0x8002a000 0x2000>;
+				status = "disabled";
+			};
+
+			efuse@8002c000 {
+				compatible = "fsl,imx23-ocotp", "fsl,ocotp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8002c000 0x2000>;
+				clocks = <&clks 15>;
+			};
+
+			axi-ahb@8002e000 {
+				reg = <0x8002e000 0x2000>;
+				status = "disabled";
+			};
+
+			lcdif@80030000 {
+				compatible = "fsl,imx23-lcdif";
+				reg = <0x80030000 2000>;
+				interrupts = <46 45>;
+				clocks = <&clks 38>;
+				status = "disabled";
+			};
+
+			ssp1: spi@80034000 {
+				reg = <0x80034000 0x2000>;
+				interrupts = <2>;
+				clocks = <&clks 33>;
+				dmas = <&dma_apbh 2>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			tvenc@80038000 {
+				reg = <0x80038000 0x2000>;
+				status = "disabled";
+			};
+		};
+
+		apbx@80040000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80040000 0x40000>;
+			ranges;
+
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
+				reg = <0x80040000 0x2000>;
+				#clock-cells = <1>;
+			};
+
+			saif0: saif@80042000 {
+				reg = <0x80042000 0x2000>;
+				dmas = <&dma_apbx 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			power@80044000 {
+				reg = <0x80044000 0x2000>;
+				status = "disabled";
+			};
+
+			saif1: saif@80046000 {
+				reg = <0x80046000 0x2000>;
+				dmas = <&dma_apbx 10>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			audio-out@80048000 {
+				reg = <0x80048000 0x2000>;
+				dmas = <&dma_apbx 1>;
+				dma-names = "tx";
+				status = "disabled";
+			};
+
+			audio-in@8004c000 {
+				reg = <0x8004c000 0x2000>;
+				dmas = <&dma_apbx 0>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			lradc: lradc@80050000 {
+				compatible = "fsl,imx23-lradc";
+				reg = <0x80050000 0x2000>;
+				interrupts = <36 37 38 39 40 41 42 43 44>;
+				status = "disabled";
+				clocks = <&clks 26>;
+				#io-channel-cells = <1>;
+			};
+
+			spdif@80054000 {
+				reg = <0x80054000 2000>;
+				dmas = <&dma_apbx 2>;
+				dma-names = "tx";
+				status = "disabled";
+			};
+
+			i2c: i2c@80058000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-i2c";
+				reg = <0x80058000 0x2000>;
+				interrupts = <27>;
+				clock-frequency = <100000>;
+				dmas = <&dma_apbx 3>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			rtc@8005c000 {
+				compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
+				reg = <0x8005c000 0x2000>;
+				interrupts = <22>;
+			};
+
+			pwm: pwm@80064000 {
+				compatible = "fsl,imx23-pwm";
+				reg = <0x80064000 0x2000>;
+				clocks = <&clks 30>;
+				#pwm-cells = <2>;
+				fsl,pwm-number = <5>;
+				status = "disabled";
+			};
+
+			timrot@80068000 {
+				compatible = "fsl,imx23-timrot", "fsl,timrot";
+				reg = <0x80068000 0x2000>;
+				interrupts = <28 29 30 31>;
+				clocks = <&clks 28>;
+			};
+
+			auart0: serial@8006c000 {
+				compatible = "fsl,imx23-auart";
+				reg = <0x8006c000 0x2000>;
+				interrupts = <24>;
+				clocks = <&clks 32>;
+				dmas = <&dma_apbx 6>, <&dma_apbx 7>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			auart1: serial@8006e000 {
+				compatible = "fsl,imx23-auart";
+				reg = <0x8006e000 0x2000>;
+				interrupts = <59>;
+				clocks = <&clks 32>;
+				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			duart: serial@80070000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x80070000 0x2000>;
+				interrupts = <0>;
+				clocks = <&clks 32>, <&clks 16>;
+				clock-names = "uart", "apb_pclk";
+				status = "disabled";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				compatible = "fsl,imx23-usbphy";
+				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 41>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80080000 0x80000>;
+		ranges;
+
+		usb0: usb@80080000 {
+			compatible = "fsl,imx23-usb", "fsl,imx27-usb";
+			reg = <0x80080000 0x40000>;
+			interrupts = <11>;
+			fsl,usbphy = <&usbphy0>;
+			clocks = <&clks 40>;
+			status = "disabled";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&lradc 8>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts
new file mode 100644
index 0000000000000..98672932e41bd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Armadeus Systems APF28 module";
+	compatible = "armadeus,imx28-apf28", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x300000>;
+	};
+
+	partition@300000 {
+		label = "env";
+		reg = <0x300000 0x80000>;
+	};
+
+	partition@380000 {
+		label = "env2";
+		reg = <0x380000 0x80000>;
+	};
+
+	partition@400000 {
+		label = "dtb";
+		reg = <0x400000 0x80000>;
+	};
+
+	partition@480000 {
+		label = "splash";
+		reg = <0x480000 0x80000>;
+	};
+
+	partition@500000 {
+		label = "kernel";
+		reg = <0x500000 0x800000>;
+	};
+
+	partition@d00000 {
+		label = "rootfs";
+		reg = <0xd00000 0xf300000>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts
new file mode 100644
index 0000000000000..4704b6141836d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ */
+
+/* APF28Dev is a docking board for the APF28 SOM */
+#include "imx28-apf28.dts"
+
+/ {
+	model = "Armadeus Systems APF28Dev docking/development board";
+	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 23 1>;
+			enable-active-high;
+		};
+
+		reg_can0_vcc: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "can0_vcc";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio0 21 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+
+		pwms = <&pwm 3 191000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can0_vcc>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_16bit_pins_a
+		     &lcdif_pins_apf28dev>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <16>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_apf28dev>;
+
+	hog_pins_apf28dev: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D16__GPIO_1_16
+			MX28_PAD_LCD_D17__GPIO_1_17
+			MX28_PAD_LCD_D18__GPIO_1_18
+			MX28_PAD_LCD_D19__GPIO_1_19
+			MX28_PAD_LCD_D20__GPIO_1_20
+			MX28_PAD_LCD_D21__GPIO_1_21
+			MX28_PAD_LCD_D22__GPIO_1_22
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_apf28dev: lcdif-apf28dev@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	usb0_otg_apf28dev: otg-apf28dev@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_otg_apf28dev
+		     &usb0_id_pins_b>;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts
new file mode 100644
index 0000000000000..f9bf40d965681
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Bluegiga APX4 Development Kit";
+	compatible = "bluegiga,apx4devkit", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "bluegiga,apx4devkit-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "apx4devkit-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 28 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_2pins_a>;
+	status = "okay";
+};
+
+&auart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart2_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_apx4>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hfront-porch = <40>;
+				vback-porch = <32>;
+				vfront-porch = <13>;
+				hsync-len = <48>;
+				vsync-len = <3>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "phg,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_RDY1__GPIO_0_21
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_LCD_RESET__GPIO_3_30
+			MX28_PAD_JTAG_RTCK__GPIO_4_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_apx4: lcdif-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA4__SSP2_D0
+			MX28_PAD_SSP0_DATA5__SSP2_D3
+			MX28_PAD_SSP0_DATA6__SSP2_CMD
+			MX28_PAD_SSP0_DATA7__SSP2_SCK
+			MX28_PAD_SSP2_SS1__SSP2_D1
+			MX28_PAD_SSP2_SS2__SSP2_D2
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__SSP2_SCK
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb1 {
+      status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts
new file mode 100644
index 0000000000000..d004b1cbb4ae1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Free Electrons
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Crystalfontz CFA-10036 Board";
+	compatible = "crystalfontz,cfa10036", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cfa10036>;
+
+		power {
+			gpios = <&gpio3 4 1>;
+			default-state = "on";
+		};
+	};
+
+	reg_vddio_sd0: vddio-sd0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc_pwr_cfa10036>;
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_b>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ssd1306: oled@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssd1306_cfa10036>;
+		reg = <0x3c>;
+		reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+		solomon,height = <32>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,com-lrremap;
+		solomon,com-invdir;
+		solomon,com-offset = <32>;
+	};
+};
+
+&pinctrl {
+	ssd1306_cfa10036: ssd1306-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins_cfa10036: leds-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_RX__GPIO_3_4
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	usb0_otg_cfa10036: otg-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY0__USB0_ID
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			0x31c3 /*
+			MX28_PAD_PWM3__GPIO_3_28 */
+		>;
+		fsl,drive-strength = <0>;
+		fsl,voltage = <1>;
+		fsl,pull-up = <0>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_otg_cfa10036>;
+	dr_mode = "peripheral";
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts
new file mode 100644
index 0000000000000..d3e9a731525bc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Free Electrons
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10037 Board";
+	compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				usb_pins_cfa10037: usb-10037@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_pins_cfa10037: mac0-10037@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS2__GPIO_2_21
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usb1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a
+				&mac0_pins_cfa10037>;
+			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10037>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts
new file mode 100644
index 0000000000000..c5a7f56d83dbd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Free Electrons
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10049 Board";
+	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2cmux_pins_cfa10049>;
+		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
+		i2c-parent = <&i2c1>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc0: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adc1: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+				adc2: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555: pca9555@20 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pca_pins_cfa10049>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <19 0x2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x20>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10049>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+
+	spi-2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10049>;
+		status = "okay";
+		sck-gpios = <&gpio2 16 0>;
+		mosi-gpios = <&gpio2 17 0>;
+		miso-gpios = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8357: hx8357@0 {
+			compatible = "himax,hx8357b", "himax,hx8357";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+			im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
+		};
+	};
+
+	spi-3 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi3_pins_cfa10049>;
+		status = "okay";
+		sck-gpios = <&gpio0 24 0>;
+		mosi-gpios = <&gpio0 28 0>;
+		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
+		num-chipselects = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio5: gpio5@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <2>;
+			spi-max-frequency = <100000>;
+		};
+
+		gpio6: gpio6@1 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <1>;
+			registers-number = <4>;
+			spi-max-frequency = <100000>;
+		};
+
+		dac0: dh2228@2 {
+			compatible = "rohm,dh2228fv";
+			reg = <2>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
+
+		rotary-button {
+			label = "rotary_button";
+			gpios = <&gpio3 26 1>;
+			debounce-interval = <10>;
+			linux,code = <28>;
+		};
+	};
+
+	rotary {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_pins_cfa10049>;
+		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
+		linux,axis = <1>; /* REL_Y */
+		rotary-encoder,relative-axis;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&w1_gpio_pins>;
+		status = "okay";
+		gpios = <&gpio1 21 0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10049
+		     &lcdif_pins_cfa10049
+		     &lcdif_pins_cfa10049_pullup>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9216000>;
+				hactive = <320>;
+				vactive = <480>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <15>;
+				vsync-len = <15>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a
+		&mac0_pins_cfa10049>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10049: usb-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	i2cmux_pins_cfa10049: i2cmux-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D22__GPIO_1_22
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_pins_cfa10049: mac0-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS2__GPIO_2_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	pca_pins_cfa10049: pca-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS0__GPIO_2_19
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	rotary_pins_cfa10049: rotary-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_I2C0_SCL__GPIO_3_24
+			MX28_PAD_I2C0_SDA__GPIO_3_25
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF1_SDATA0__GPIO_3_26
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	spi2_pins_cfa10049: spi2-cfa10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	spi3_pins_cfa10049: spi3-cfa10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDN__GPIO_0_24
+			MX28_PAD_GPMI_RESETN__GPIO_0_28
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_ALE__GPIO_0_26
+			MX28_PAD_GPMI_CLE__GPIO_0_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10049: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	w1_gpio_pins: w1-gpio@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D21__GPIO_1_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts
new file mode 100644
index 0000000000000..70e225a99fbe7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * 				  Free Electrons
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+#include "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10055 Board";
+	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	spi-2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10055>;
+		status = "okay";
+		sck-gpios = <&gpio2 16 0>;
+		mosi-gpios = <&gpio2 17 0>;
+		miso-gpios = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8357: hx8357@0 {
+			compatible = "himax,hx8357b", "himax,hx8357";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10055
+		     &lcdif_pins_cfa10055
+		     &lcdif_pins_cfa10055_pullup>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9216000>;
+				hactive = <320>;
+				vactive = <480>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <15>;
+				vsync-len = <15>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&pinctrl {
+	spi2_pins_cfa10055: spi2-cfa10055@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10055: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dts
new file mode 100644
index 0000000000000..bc2d6fcad12f9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Free Electrons
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+#include "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10056 Board";
+	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	spi-2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10056>;
+		status = "okay";
+		sck-gpios = <&gpio2 16 0>;
+		mosi-gpios = <&gpio2 17 0>;
+		miso-gpios = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8369: hx8369@0 {
+			compatible = "himax,hx8369a", "himax,hx8369";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+};
+
+&pinctrl {
+	spi2_pins_cfa10056: spi2-cfa10056@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_pins_cfa10056: lcdif-10056@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+			&lcdif_pins_cfa10056
+			&lcdif_pins_cfa10056_pullup >;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <32000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <5>;
+				vsync-len = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts
new file mode 100644
index 0000000000000..27602c01f162f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2012 Free Electrons
+ */
+
+/*
+ * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10057 Board";
+	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10057>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10057
+		     &lcdif_pins_cfa10057>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <12>;
+				hback-porch = <2>;
+				vfront-porch = <5>;
+				vback-porch = <3>;
+				hsync-len = <2>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10057: usb-10057@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10057: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts
new file mode 100644
index 0000000000000..931c4d089b269
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2013 Free Electrons
+ */
+
+/*
+ * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10058 Board";
+	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb1_vbus: regulator@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10058>;
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+			 &lcdif_pins_cfa10058>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <40>;
+				vback-porch = <13>;
+				vfront-porch = <29>;
+				hsync-len = <8>;
+				vsync-len = <8>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10058: usb-10058@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10058: lcdif-10058@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dts
new file mode 100644
index 0000000000000..b73020ff1053d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include "imx28-duckbill-2.dts"
+
+/ {
+	model = "I2SE Duckbill 2 485";
+	compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
+
+	leds {
+		rs485-red {
+			label = "duckbill:red:rs485";
+			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+		};
+
+		rs485-green {
+			label = "duckbill:green:rs485";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&led_pins {
+	fsl,pinmux-ids = <
+		MX28_PAD_SAIF0_MCLK__GPIO_3_20
+		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		MX28_PAD_I2C0_SCL__GPIO_3_24
+		MX28_PAD_I2C0_SDA__GPIO_3_25
+	>;
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dts
new file mode 100644
index 0000000000000..473d99b9b42f5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx28-duckbill-2.dts"
+
+/ {
+	model = "I2SE Duckbill 2 EnOcean";
+	compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
+
+	leds {
+		enocean-blue {
+			label = "duckbill:blue:enocean";
+			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+		};
+
+		enocean-red {
+			label = "duckbill:red:enocean";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+		};
+
+		enocean-green {
+			label = "duckbill:green:enocean";
+			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&enocean_button>;
+
+		key-enocean {
+			label = "EnOcean";
+			linux,code = <KEY_NEW>;
+			gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&led_pins {
+	fsl,pinmux-ids = <
+		MX28_PAD_SAIF0_MCLK__GPIO_3_20
+		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		MX28_PAD_AUART0_CTS__GPIO_3_2
+		MX28_PAD_I2C0_SCL__GPIO_3_24
+		MX28_PAD_I2C0_SDA__GPIO_3_25
+	>;
+};
+
+&pinctrl {
+	enocean_button: enocean-button@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART0_RTS__GPIO_3_3
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-spi.dts
new file mode 100644
index 0000000000000..859d97a5a7751
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-spi.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include "imx28-duckbill-2.dts"
+
+/ {
+	model = "I2SE Duckbill 2 SPI";
+	compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
+
+	aliases {
+		ethernet1 = &qca7000;
+	};
+};
+
+&auart0 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&pinctrl {
+	qca7000_pins: qca7000@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
+			MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
+			MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
+			MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
+			MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
+			MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	/delete-property/ bus-width;
+	/delete-property/ vmmc-supply;
+	status = "okay";
+
+	qca7000: ethernet@0 {
+		reg = <0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&qca7000_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <8000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dts
new file mode 100644
index 0000000000000..4e28212e96260
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill 2";
+	compatible = "i2se,duckbill-2", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status-red {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		status-green {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+	phy-supply = <&reg_3p3v>;
+	phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_phy_int_pin>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_reset_pin: mac0-phy-reset@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_int_pin: mac0-phy-int@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20
+			MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+	non-removable;
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_b
+		&mmc2_cd_cfg &mmc2_sck_cfg_b>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dts
new file mode 100644
index 0000000000000..13ffd533fdea7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de>
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill";
+	compatible = "i2se,duckbill", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status-red {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		status-green {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+	phy-supply = <&reg_3p3v>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_reset_pin: mac0-phy-reset@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_RX__GPIO_3_4
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx283lc.dts
new file mode 100644
index 0000000000000..29f8a3a245d42
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx283lc.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/*
+ * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
+ */
+
+/dts-v1/;
+#include "imx28-eukrea-mbmx28lc.dtsi"
+
+/ {
+	model = "Eukrea Electromatique MBMX283LC";
+	compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl{
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_cpuimx283>;
+
+	hog_pins_cpuimx283: hog-cpuimx283@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx287lc.dts
new file mode 100644
index 0000000000000..cd875ace168d7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx287lc.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/*
+ * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC
+ */
+
+#include "imx28-eukrea-mbmx283lc.dts"
+
+/ {
+	model = "Eukrea Electromatique MBMX287LC";
+	compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>;
+	hog_pins_cpuimx287: hog-cpuimx287@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi
new file mode 100644
index 0000000000000..b285a946e2c2a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "Eukrea Electromatique MBMX28LC";
+	compatible = "eukrea,mbmx28lc", "fsl,imx28";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 1000000>;
+		brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
+		default-brightness-level = <10>;
+	};
+
+	gpio-keys-0 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
+
+		switch-sw3 {
+			label = "SW3";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys-1 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
+
+		switch-sw4 {
+			label = "SW4";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	led-d6 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_d6_pins_mbmx28lc>;
+
+		led1 {
+			label = "d6";
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led-d7 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_d7_pins_mbmx28lc>;
+
+		led1 {
+			label = "d7";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_lcd_3v3: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb0_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-mbmx28lc-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-mbmx28lc-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_4pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
+	lcd-supply = <&reg_lcd_3v3>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		model = "43WVF1G-0";
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9072000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <10>;
+				hfront-porch = <5>;
+				vback-porch = <8>;
+				vfront-porch = <8>;
+				hsync-len = <40>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D21__GPIO_1_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D20__GPIO_1_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_VSYNC__LCD_VSYNC
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D22__GPIO_1_22
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D18__GPIO_1_18
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D19__GPIO_1_19
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	cd-inverted;
+	status = "okay";
+};
+
+&usb0 {
+	disable-over-current;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_b>;
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts
new file mode 100644
index 0000000000000..783abb82b2a8e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Freescale i.MX28 Evaluation Kit";
+	compatible = "fsl,imx28-evk", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
+
+	reg_fec_3v3: regulator-fec-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 15 0>;
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 9 0>;
+		enable-active-high;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 8 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 30 0>;
+		enable-active-high;
+	};
+
+	reg_can_3v3: regulator-can-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 13 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio3_5>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 5 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight_display: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
+		     &gpmi_pins_evk>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_evk>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	fsl,ave-ctrl = <4>;
+	fsl,ave-delay = <2>;
+	fsl,settling = <10>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	at24@51 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x51>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-supply = <&reg_fec_3v3>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP1_CMD__GPIO_2_13
+			MX28_PAD_SSP1_DATA3__GPIO_2_15
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+			MX28_PAD_SSP1_SCK__GPIO_2_12
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_LCD_RESET__GPIO_3_30
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_AUART2_TX__GPIO_3_9
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pin_gpio3_5: led_gpio3_5@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	gpmi_pins_evk: gpmi-nand-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE1N__GPMI_CE1N
+			MX28_PAD_GPMI_RDY1__GPMI_READY1
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_evk: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <8>;
+	wp-gpios = <&gpio2 12 0>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp1 {
+	compatible = "fsl,imx28-mmc";
+	bus-width = <8>;
+	wp-gpios = <&gpio0 28 0>;
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_a>;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
new file mode 100644
index 0000000000000..bb971e660db8e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	aliases {
+		spi2 = &ssp3;
+	};
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_3v3: regulator-reg-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_5v: regulator-reg-usb-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_fec_3v3: regulator-reg-fec-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-phy";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clks 53>;
+	assigned-clock-rates = <12000000>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&spi3_pins_a {
+	fsl,pinmux-ids = <
+		MX28_PAD_AUART2_RX__SSP3_D4
+		MX28_PAD_AUART2_TX__SSP3_D5
+		MX28_PAD_SSP3_SCK__SSP3_SCK
+		MX28_PAD_SSP3_MOSI__SSP3_CMD
+		MX28_PAD_SSP3_MISO__SSP3_D0
+		MX28_PAD_SSP3_SS0__SSP3_D3
+		MX28_PAD_AUART2_TX__GPIO_3_9
+	>;
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3v3>;
+	non-removable;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&ssp3 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins_a>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0x80000>;
+				read-only;
+			};
+
+			partition@80000 {
+				label = "env0";
+				reg = <0x80000 0x10000>;
+			};
+
+			partition@90000 {
+				label = "env1";
+				reg = <0x90000 0x10000>;
+			};
+
+			partition@100000 {
+				label = "kernel";
+				reg = <0x100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "swupdate";
+				reg = <0x500000 0x800000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb_5v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb_5v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_b>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi
new file mode 100644
index 0000000000000..c08b14ad7cd53
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx28.dtsi"
+
+/ {
+	model = "Aries/DENX M28";
+	compatible = "aries,m28", "denx,m28", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&gpmi {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
new file mode 100644
index 0000000000000..6b01de9efd024
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "MSR M28CU3";
+	compatible = "msr,m28cu3", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_gpio>;
+
+		user1 {
+			label = "sd0-led";
+			gpios = <&gpio2 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user2 {
+			label = "sd1-led";
+			gpios = <&gpio2 24 0>;
+			linux,default-trigger = "mmc2";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vddio_sd0: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 29 0>;
+		};
+
+		reg_vddio_sd1: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vddio-sd1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 19 0>;
+		};
+
+		reg_usb1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 8 0>;
+			enable-active-high;
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_2pins_b>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&gpmi {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+
+	partition@0 {
+		label = "gpmi-nfc-0-boot";
+		reg = <0x00000000 0x01400000>;
+		read-only;
+	};
+
+	partition@1 {
+		label = "gpmi-nfc-general-use";
+		reg = <0x01400000 0x0ec00000>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_m28>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <6410256>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vfront-porch = <5>;
+				hsync-len = <30>;
+				vsync-len = <3>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&ocotp {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS0__GPIO_2_19
+			MX28_PAD_PWM4__GPIO_3_29
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_m28: lcdif-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_VSYNC__LCD_VSYNC
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_RESET__LCD_RESET
+			MX28_PAD_LCD_CS__LCD_ENABLE
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins_gpio: leds-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP3_MISO__GPIO_2_26
+			MX28_PAD_SSP3_SCK__GPIO_2_24
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_a
+		     &mmc2_cd_cfg
+		     &mmc2_sck_cfg_a>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd1>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts b/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
new file mode 100644
index 0000000000000..e350d57a4cec0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx28-m28.dtsi"
+
+/ {
+	model = "Aries/DENX M28EVK";
+	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	regulators {
+		reg_vddio_sd0: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 28 0>;
+		};
+
+		reg_usb0_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 12 0>;
+		};
+
+		reg_usb1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 13 0>;
+		};
+	};
+
+	sound {
+		compatible = "denx,m28evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "m28evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+&auart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart2_2pins_b>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	eeprom: eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_m28>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <0>;
+				hfront-porch = <256>;
+				vback-porch = <0>;
+				vfront-porch = <45>;
+				hsync-len = <1>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	status = "okay";
+	fsl,lradc-touchscreen-wires = <4>;
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	clocks = <&clks 57>, <&clks 57>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_AUART2_CTS__GPIO_3_10
+			MX28_PAD_AUART2_RTS__GPIO_3_11
+			MX28_PAD_AUART3_RX__GPIO_3_12
+			MX28_PAD_AUART3_TX__GPIO_3_13
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_m28: lcdif-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <8>;
+	wp-gpios = <&gpio3 10 0>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-pinfunc.h b/arch/arm/boot/dts/nxp/mxs/imx28-pinfunc.h
new file mode 100644
index 0000000000000..d427e6c2fa780
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-pinfunc.h
@@ -0,0 +1,500 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
+#define __DT_BINDINGS_MX28_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX28_PAD_GPMI_D00__GPMI_D0			0x0000
+#define MX28_PAD_GPMI_D01__GPMI_D1			0x0010
+#define MX28_PAD_GPMI_D02__GPMI_D2			0x0020
+#define MX28_PAD_GPMI_D03__GPMI_D3			0x0030
+#define MX28_PAD_GPMI_D04__GPMI_D4			0x0040
+#define MX28_PAD_GPMI_D05__GPMI_D5			0x0050
+#define MX28_PAD_GPMI_D06__GPMI_D6			0x0060
+#define MX28_PAD_GPMI_D07__GPMI_D7			0x0070
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
+#define MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
+#define MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
+#define MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
+#define MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
+#define MX28_PAD_LCD_D00__LCD_D0			0x1000
+#define MX28_PAD_LCD_D01__LCD_D1			0x1010
+#define MX28_PAD_LCD_D02__LCD_D2			0x1020
+#define MX28_PAD_LCD_D03__LCD_D3			0x1030
+#define MX28_PAD_LCD_D04__LCD_D4			0x1040
+#define MX28_PAD_LCD_D05__LCD_D5			0x1050
+#define MX28_PAD_LCD_D06__LCD_D6			0x1060
+#define MX28_PAD_LCD_D07__LCD_D7			0x1070
+#define MX28_PAD_LCD_D08__LCD_D8			0x1080
+#define MX28_PAD_LCD_D09__LCD_D9			0x1090
+#define MX28_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX28_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX28_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX28_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX28_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX28_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX28_PAD_LCD_D16__LCD_D16			0x1100
+#define MX28_PAD_LCD_D17__LCD_D17			0x1110
+#define MX28_PAD_LCD_D18__LCD_D18			0x1120
+#define MX28_PAD_LCD_D19__LCD_D19			0x1130
+#define MX28_PAD_LCD_D20__LCD_D20			0x1140
+#define MX28_PAD_LCD_D21__LCD_D21			0x1150
+#define MX28_PAD_LCD_D22__LCD_D22			0x1160
+#define MX28_PAD_LCD_D23__LCD_D23			0x1170
+#define MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
+#define MX28_PAD_LCD_RS__LCD_RS				0x11a0
+#define MX28_PAD_LCD_CS__LCD_CS				0x11b0
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
+#define MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
+#define MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
+#define MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
+#define MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
+#define MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
+#define MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
+#define MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
+#define MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
+#define MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
+#define MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
+#define MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
+#define MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
+#define MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
+#define MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
+#define MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
+#define MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
+#define MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
+#define MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
+#define MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
+#define MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
+#define MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
+#define MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
+#define MX28_PAD_AUART0_RX__AUART0_RX			0x3000
+#define MX28_PAD_AUART0_TX__AUART0_TX			0x3010
+#define MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
+#define MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
+#define MX28_PAD_AUART1_RX__AUART1_RX			0x3040
+#define MX28_PAD_AUART1_TX__AUART1_TX			0x3050
+#define MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
+#define MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
+#define MX28_PAD_AUART2_RX__AUART2_RX			0x3080
+#define MX28_PAD_AUART2_TX__AUART2_TX			0x3090
+#define MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
+#define MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
+#define MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
+#define MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
+#define MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
+#define MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
+#define MX28_PAD_PWM0__PWM_0				0x3100
+#define MX28_PAD_PWM1__PWM_1				0x3110
+#define MX28_PAD_PWM2__PWM_2				0x3120
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
+#define MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
+#define MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
+#define MX28_PAD_SPDIF__SPDIF_TX			0x31b0
+#define MX28_PAD_PWM3__PWM_3				0x31c0
+#define MX28_PAD_PWM4__PWM_4				0x31d0
+#define MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
+#define MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
+#define MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
+#define MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
+#define MX28_PAD_EMI_D00__EMI_DATA0			0x5000
+#define MX28_PAD_EMI_D01__EMI_DATA1			0x5010
+#define MX28_PAD_EMI_D02__EMI_DATA2			0x5020
+#define MX28_PAD_EMI_D03__EMI_DATA3			0x5030
+#define MX28_PAD_EMI_D04__EMI_DATA4			0x5040
+#define MX28_PAD_EMI_D05__EMI_DATA5			0x5050
+#define MX28_PAD_EMI_D06__EMI_DATA6			0x5060
+#define MX28_PAD_EMI_D07__EMI_DATA7			0x5070
+#define MX28_PAD_EMI_D08__EMI_DATA8			0x5080
+#define MX28_PAD_EMI_D09__EMI_DATA9			0x5090
+#define MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
+#define MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
+#define MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
+#define MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
+#define MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
+#define MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
+#define MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
+#define MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
+#define MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
+#define MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
+#define MX28_PAD_EMI_CLK__EMI_CLK			0x5150
+#define MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
+#define MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
+#define MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
+#define MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
+#define MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
+#define MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
+#define MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
+#define MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
+#define MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
+#define MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
+#define MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
+#define MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
+#define MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
+#define MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
+#define MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
+#define MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
+#define MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
+#define MX28_PAD_EMI_BA0__EMI_BA0			0x6100
+#define MX28_PAD_EMI_BA1__EMI_BA1			0x6110
+#define MX28_PAD_EMI_BA2__EMI_BA2			0x6120
+#define MX28_PAD_EMI_CASN__EMI_CASN			0x6130
+#define MX28_PAD_EMI_RASN__EMI_RASN			0x6140
+#define MX28_PAD_EMI_WEN__EMI_WEN			0x6150
+#define MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
+#define MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
+#define MX28_PAD_EMI_CKE__EMI_CKE			0x6180
+#define MX28_PAD_GPMI_D00__SSP1_D0			0x0001
+#define MX28_PAD_GPMI_D01__SSP1_D1			0x0011
+#define MX28_PAD_GPMI_D02__SSP1_D2			0x0021
+#define MX28_PAD_GPMI_D03__SSP1_D3			0x0031
+#define MX28_PAD_GPMI_D04__SSP1_D4			0x0041
+#define MX28_PAD_GPMI_D05__SSP1_D5			0x0051
+#define MX28_PAD_GPMI_D06__SSP1_D6			0x0061
+#define MX28_PAD_GPMI_D07__SSP1_D7			0x0071
+#define MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
+#define MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
+#define MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
+#define MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
+#define MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
+#define MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
+#define MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
+#define MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
+#define MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
+#define MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
+#define MX28_PAD_LCD_D03__ETM_DA8			0x1031
+#define MX28_PAD_LCD_D04__ETM_DA9			0x1041
+#define MX28_PAD_LCD_D08__ETM_DA3			0x1081
+#define MX28_PAD_LCD_D09__ETM_DA4			0x1091
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
+#define MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
+#define MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
+#define MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
+#define MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
+#define MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
+#define MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
+#define MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
+#define MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
+#define MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
+#define MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
+#define MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
+#define MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
+#define MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
+#define MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
+#define MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
+#define MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
+#define MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
+#define MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
+#define MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
+#define MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
+#define MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
+#define MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
+#define MX28_PAD_AUART1_RTS__USB0_ID			0x3071
+#define MX28_PAD_AUART2_RX__SSP3_D1			0x3081
+#define MX28_PAD_AUART2_TX__SSP3_D2			0x3091
+#define MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
+#define MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
+#define MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
+#define MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
+#define MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
+#define MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
+#define MX28_PAD_PWM0__I2C1_SCL				0x3101
+#define MX28_PAD_PWM1__I2C1_SDA				0x3111
+#define MX28_PAD_PWM2__USB0_ID				0x3121
+#define MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
+#define MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
+#define MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
+#define MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
+#define MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
+#define MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
+#define MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
+#define MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
+#define MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
+#define MX28_PAD_LCD_D00__ETM_DA0			0x1002
+#define MX28_PAD_LCD_D01__ETM_DA1			0x1012
+#define MX28_PAD_LCD_D02__ETM_DA2			0x1022
+#define MX28_PAD_LCD_D03__ETM_DA3			0x1032
+#define MX28_PAD_LCD_D04__ETM_DA4			0x1042
+#define MX28_PAD_LCD_D05__ETM_DA5			0x1052
+#define MX28_PAD_LCD_D06__ETM_DA6			0x1062
+#define MX28_PAD_LCD_D07__ETM_DA7			0x1072
+#define MX28_PAD_LCD_D08__ETM_DA8			0x1082
+#define MX28_PAD_LCD_D09__ETM_DA9			0x1092
+#define MX28_PAD_LCD_D10__ETM_DA10			0x10a2
+#define MX28_PAD_LCD_D11__ETM_DA11			0x10b2
+#define MX28_PAD_LCD_D12__ETM_DA12			0x10c2
+#define MX28_PAD_LCD_D13__ETM_DA13			0x10d2
+#define MX28_PAD_LCD_D14__ETM_DA14			0x10e2
+#define MX28_PAD_LCD_D15__ETM_DA15			0x10f2
+#define MX28_PAD_LCD_D16__ETM_DA7			0x1102
+#define MX28_PAD_LCD_D17__ETM_DA6			0x1112
+#define MX28_PAD_LCD_D18__ETM_DA5			0x1122
+#define MX28_PAD_LCD_D19__ETM_DA4			0x1132
+#define MX28_PAD_LCD_D20__ETM_DA3			0x1142
+#define MX28_PAD_LCD_D21__ETM_DA2			0x1152
+#define MX28_PAD_LCD_D22__ETM_DA1			0x1162
+#define MX28_PAD_LCD_D23__ETM_DA0			0x1172
+#define MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
+#define MX28_PAD_AUART0_RX__DUART_CTS			0x3002
+#define MX28_PAD_AUART0_TX__DUART_RTS			0x3012
+#define MX28_PAD_AUART0_CTS__DUART_RX			0x3022
+#define MX28_PAD_AUART0_RTS__DUART_TX			0x3032
+#define MX28_PAD_AUART1_RX__PWM_0			0x3042
+#define MX28_PAD_AUART1_TX__PWM_1			0x3052
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
+#define MX28_PAD_AUART2_RX__SSP3_D4			0x3082
+#define MX28_PAD_AUART2_TX__SSP3_D5			0x3092
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
+#define MX28_PAD_PWM0__DUART_RX				0x3102
+#define MX28_PAD_PWM1__DUART_TX				0x3112
+#define MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
+#define MX28_PAD_I2C0_SCL__DUART_RX			0x3182
+#define MX28_PAD_I2C0_SDA__DUART_TX			0x3192
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
+#define MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
+#define MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
+#define MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
+#define MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
+#define MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
+#define MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
+#define MX28_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX28_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX28_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX28_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX28_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX28_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX28_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX28_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX28_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX28_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX28_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX28_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX28_PAD_LCD_D18__GPIO_1_18			0x1123
+#define MX28_PAD_LCD_D19__GPIO_1_19			0x1133
+#define MX28_PAD_LCD_D20__GPIO_1_20			0x1143
+#define MX28_PAD_LCD_D21__GPIO_1_21			0x1153
+#define MX28_PAD_LCD_D22__GPIO_1_22			0x1163
+#define MX28_PAD_LCD_D23__GPIO_1_23			0x1173
+#define MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
+#define MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
+#define MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
+#define MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
+#define MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
+#define MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
+#define MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
+#define MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
+#define MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
+#define MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
+#define MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
+#define MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
+#define MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
+#define MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
+#define MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
+#define MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
+#define MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
+#define MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
+#define MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
+#define MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
+#define MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
+#define MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
+#define MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
+#define MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
+#define MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
+#define MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
+#define MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
+#define MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
+#define MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
+#define MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
+#define MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
+#define MX28_PAD_PWM0__GPIO_3_16			0x3103
+#define MX28_PAD_PWM1__GPIO_3_17			0x3113
+#define MX28_PAD_PWM2__GPIO_3_18			0x3123
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
+#define MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
+#define MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
+#define MX28_PAD_SPDIF__GPIO_3_27			0x31b3
+#define MX28_PAD_PWM3__GPIO_3_28			0x31c3
+#define MX28_PAD_PWM4__GPIO_3_29			0x31d3
+#define MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
+#define MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
+#define MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
+#define MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
+#define MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
+
+#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts
new file mode 100644
index 0000000000000..5d74a68c56ff7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "SchulerControl GmbH, SC SPS 1";
+	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 9 0>;
+		};
+	};
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led@1 {
+			label = "sps1-1:yellow:user";
+			gpios = <&gpio0 6 0>;
+			linux,default-trigger = "heartbeat";
+			reg = <0>;
+		};
+
+		led@2 {
+			label = "sps1-2:red:user";
+			gpios = <&gpio0 3 0>;
+			linux,default-trigger = "heartbeat";
+			reg = <1>;
+		};
+
+		led@3 {
+			label = "sps1-3:red:user";
+			gpios = <&gpio0 0 0>;
+			default-trigger = "heartbeat";
+			reg = <2>;
+		};
+
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog-gpios@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D00__GPIO_0_0
+			MX28_PAD_GPMI_D03__GPIO_0_3
+			MX28_PAD_GPMI_D06__GPIO_0_6
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256", "mr25h256";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_b>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-ts4600.dts b/arch/arm/boot/dts/nxp/mxs/imx28-ts4600.dts
new file mode 100644
index 0000000000000..ae6ed5c41be32
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-ts4600.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Savoir-Faire Linux
+ * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+
+	model = "Technologic Systems i.MX28 TS-4600";
+	compatible = "technologic,imx28-ts4600", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;   /* 256MB */
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio3 28 GPIO_ACTIVE_LOW>;
+	};
+
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	en_sd_pwr: en-sd-pwr@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_sck_cfg
+		     &en_sd_pwr>;
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
new file mode 100644
index 0000000000000..23ad7cd0a1de0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
@@ -0,0 +1,677 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Ka-Ro electronics TX28 module";
+	compatible = "karo,tx28", "fsl,imx28";
+
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		display = &display0;
+		ds1339 = &ds1339;
+		gpio5 = &gpio5;
+		lcdif = &lcdif;
+		lcdif_23bit_pins = &tx28_lcdif_23bit_pins;
+		lcdif_24bit_pins = &lcdif_24bit_pins_a;
+		reg_can_xcvr = &reg_can_xcvr;
+		spi_gpio = &spi_gpio;
+		spi_mxs = &ssp3;
+		stk5led = &user_led;
+		usbotg = &usb0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0>; /* will be filled in by U-Boot */
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
+	};
+
+	reg_lcd: regulator-lcd-power {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <300000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx28-tx28-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-tx28-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led: user {
+			label = "Heartbeat";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 500000>;
+		/*
+		 * a silly way to create a 1:1 relationship between the
+		 * PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	matrix_keypad: matrix-keypad {
+		compatible = "gpio-matrix-keypad";
+		col-gpios = <
+			&gpio5 0 GPIO_ACTIVE_HIGH
+			&gpio5 1 GPIO_ACTIVE_HIGH
+			&gpio5 2 GPIO_ACTIVE_HIGH
+			&gpio5 3 GPIO_ACTIVE_HIGH
+		>;
+		row-gpios = <
+			&gpio5 4 GPIO_ACTIVE_HIGH
+			&gpio5 5 GPIO_ACTIVE_HIGH
+			&gpio5 6 GPIO_ACTIVE_HIGH
+			&gpio5 7 GPIO_ACTIVE_HIGH
+		>;
+		/* sample keymap */
+		linux,keymap = <
+			0x00000074 /* row 0, col 0, KEY_POWER */
+			0x00010052 /* row 0, col 1, KEY_KP0 */
+			0x0002004f /* row 0, col 2, KEY_KP1 */
+			0x00030050 /* row 0, col 3, KEY_KP2 */
+			0x01000051 /* row 1, col 0, KEY_KP3 */
+			0x0101004b /* row 1, col 1, KEY_KP4 */
+			0x0102004c /* row 1, col 2, KEY_KP5 */
+			0x0103004d /* row 1, col 3, KEY_KP6 */
+			0x02000047 /* row 2, col 0, KEY_KP7 */
+			0x02010048 /* row 2, col 1, KEY_KP8 */
+			0x02020049 /* row 2, col 2, KEY_KP9 */
+		>;
+		gpio-activelow;
+		wakeup-source;
+		debounce-delay-ms = <100>;
+		col-scan-delay-us = <5000>;
+		linux,no-autorepeat;
+	};
+
+	spi_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_spi_gpio_pins>;
+
+		sck-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <3>;
+		cs-gpios = <
+			&gpio2 27 GPIO_ACTIVE_LOW
+			&gpio3 8 GPIO_ACTIVE_LOW
+			&gpio3 9 GPIO_ACTIVE_LOW
+		>;
+		/* enable this and disable ssp3 below, if you need full duplex SPI transfer */
+		status = "disabled";
+	};
+};
+
+/* 2nd TX-Std UART - (A)UART1  */
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+/* 3rd TX-Std UART - (A)UART3  */
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&digctl {
+	status = "okay";
+};
+
+/* 1st TX-Std UART - (D)UART */
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_4pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&mclk>;
+	};
+
+	gpio5: pca953x@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_pca9554_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <28 IRQ_TYPE_NONE>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_edt_ft5x06_pins>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_tsc2007_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = /bits/ 16 <660>;
+	};
+
+	ds1339: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+		trickle-resistor-ohms = <250>;
+		trickle-diode-disable;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>;
+	lcd-supply = <&reg_lcd>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+		display-timings {
+			native-mode = <&timing5>;
+			timing0: timing0 {
+				panel-name = "VGA";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing1: timing1 {
+				panel-name = "ETV570";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing2: timing2 {
+				panel-name = "ET0350";
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing3: timing3 {
+				panel-name = "ET0430";
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing4: timing4 {
+				panel-name = "ET0500", "ET0700";
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing5: timing5 {
+				panel-name = "ETQ570";
+				clock-frequency = <6400000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default", "gpio_mode";
+	pinctrl-0 = <&mac0_pins_a>;
+	pinctrl-1 = <&tx28_mac0_pins_gpio>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	/* not enabled by default */
+};
+
+&mxs_rtc {
+	status = "okay";
+};
+
+&ocotp {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
+			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
+			MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__GPIO_1_0
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_23bit_pins: tx28-lcdif-23bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+			MX28_PAD_LCD_D18__LCD_D18
+			MX28_PAD_LCD_D19__LCD_D19
+			MX28_PAD_LCD_D20__LCD_D20
+			MX28_PAD_LCD_D21__LCD_D21
+			MX28_PAD_LCD_D22__LCD_D22
+			MX28_PAD_LCD_D23__LCD_D23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
+			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_MDC__GPIO_4_0
+			MX28_PAD_ENET0_MDIO__GPIO_4_1
+			MX28_PAD_ENET0_RX_EN__GPIO_4_2
+			MX28_PAD_ENET0_RXD0__GPIO_4_3
+			MX28_PAD_ENET0_RXD1__GPIO_4_4
+			MX28_PAD_ENET0_TX_EN__GPIO_4_6
+			MX28_PAD_ENET0_TXD0__GPIO_4_7
+			MX28_PAD_ENET0_TXD1__GPIO_4_8
+			MX28_PAD_ENET_CLK__GPIO_4_16
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_pca9554_pins: tx28-pca9554-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_spi_gpio_pins: spi-gpiogrp@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_AUART2_TX__GPIO_3_9
+			MX28_PAD_SSP3_SCK__GPIO_2_24
+			MX28_PAD_SSP3_MOSI__GPIO_2_25
+			MX28_PAD_SSP3_MISO__GPIO_2_26
+			MX28_PAD_SSP3_SS0__GPIO_2_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_tsc2007_pins: tx28-tsc2007-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+
+	tx28_usbphy0_pins: tx28-usbphy0-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
+			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_usbphy1_pins: tx28-usbphy1-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
+			MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_b>;
+	fsl,saif-master;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default", "special";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp3 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins_a>;
+	clock-frequency = <57600000>;
+	status = "okay";
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy0_pins>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy1_pins>;
+	phy_type = "utmi";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts b/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts
new file mode 100644
index 0000000000000..a400c108f66a2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-lwe.dtsi"
+
+/ {
+	compatible = "lwn,imx28-xea", "fsl,imx28";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a &hog_pins_tiva>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D00__GPIO_0_0
+			MX28_PAD_GPMI_D02__GPIO_0_2
+			MX28_PAD_GPMI_D05__GPIO_0_5
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_RDY0__GPIO_0_20
+			MX28_PAD_GPMI_RDY1__GPIO_0_21
+			MX28_PAD_GPMI_RDY2__GPIO_0_22
+			MX28_PAD_GPMI_RDN__GPIO_0_24
+			MX28_PAD_GPMI_CLE__GPIO_0_27
+			MX28_PAD_LCD_VSYNC__GPIO_1_28
+			MX28_PAD_SSP1_SCK__GPIO_2_12
+			MX28_PAD_SSP1_CMD__GPIO_2_13
+			MX28_PAD_SSP2_SS1__GPIO_2_20
+			MX28_PAD_SSP2_SS2__GPIO_2_21
+			MX28_PAD_LCD_D00__GPIO_1_0
+			MX28_PAD_LCD_D01__GPIO_1_1
+			MX28_PAD_LCD_D02__GPIO_1_2
+			MX28_PAD_LCD_D03__GPIO_1_3
+			MX28_PAD_LCD_D04__GPIO_1_4
+			MX28_PAD_LCD_D05__GPIO_1_5
+			MX28_PAD_LCD_D06__GPIO_1_6
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	hog_pins_tiva: hog@1 {
+		reg = <1>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY3__GPIO_0_23
+			MX28_PAD_GPMI_WRN__GPIO_0_25
+		>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	hog_pins_coding: hog@2 {
+		reg = <2>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D01__GPIO_0_1
+			MX28_PAD_GPMI_D03__GPIO_0_3
+			MX28_PAD_GPMI_D04__GPIO_0_4
+			MX28_PAD_GPMI_D06__GPIO_0_6
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&reg_fec_3v3 {
+	gpio = <&gpio0 0 0>;
+};
+
+&reg_usb_5v {
+	gpio = <&gpio0 2 0>;
+};
+
+&spi2_pins_a {
+	fsl,pinmux-ids = <
+		MX28_PAD_SSP2_SCK__SSP2_SCK
+		MX28_PAD_SSP2_MOSI__SSP2_CMD
+		MX28_PAD_SSP2_MISO__SSP2_D0
+		MX28_PAD_SSP2_SS0__GPIO_2_19
+	>;
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
new file mode 100644
index 0000000000000..29e37b1fae66f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -0,0 +1,1334 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		saif0 = &saif0;
+		saif1 = &saif1;
+		serial0 = &auart0;
+		serial1 = &auart1;
+		serial2 = &auart2;
+		serial3 = &auart3;
+		serial4 = &auart4;
+		spi0 = &ssp1;
+		spi1 = &ssp2;
+		usbphy0 = &usbphy0;
+		usbphy1 = &usbphy1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	apb@80000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x80000>;
+		ranges;
+
+		apbh@80000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x3c900>;
+			ranges;
+
+			icoll: interrupt-controller@80000000 {
+				compatible = "fsl,imx28-icoll", "fsl,icoll";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x80000000 0x2000>;
+			};
+
+			hsadc: hsadc@80002000 {
+				reg = <0x80002000 0x2000>;
+				interrupts = <13>;
+				dmas = <&dma_apbh 12>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dma_apbh: dma-controller@80004000 {
+				compatible = "fsl,imx28-dma-apbh";
+				reg = <0x80004000 0x2000>;
+				interrupts = <82 83 84 85
+					      88 88 88 88
+					      88 88 88 88
+					      87 86 0 0>;
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 25>;
+			};
+
+			perfmon: perfmon@80006000 {
+				reg = <0x80006000 0x800>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			gpmi: nand-controller@8000c000 {
+				compatible = "fsl,imx28-gpmi-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+				reg-names = "gpmi-nand", "bch";
+				interrupts = <41>;
+				interrupt-names = "bch";
+				clocks = <&clks 50>;
+				clock-names = "gpmi_io";
+				assigned-clocks = <&clks 13>;
+				assigned-clock-parents = <&clks 10>;
+				dmas = <&dma_apbh 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp0: spi@80010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80010000 0x2000>;
+				interrupts = <96>;
+				clocks = <&clks 46>;
+				dmas = <&dma_apbh 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp1: spi@80012000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80012000 0x2000>;
+				interrupts = <97>;
+				clocks = <&clks 47>;
+				dmas = <&dma_apbh 1>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp2: spi@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80014000 0x2000>;
+				interrupts = <98>;
+				clocks = <&clks 48>;
+				dmas = <&dma_apbh 2>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp3: spi@80016000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80016000 0x2000>;
+				interrupts = <99>;
+				clocks = <&clks 49>;
+				dmas = <&dma_apbh 3>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-pinctrl", "simple-bus";
+				reg = <0x80018000 0x2000>;
+
+				gpio0: gpio@0 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <0>;
+					interrupts = <127>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio1: gpio@1 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <1>;
+					interrupts = <126>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@2 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <2>;
+					interrupts = <125>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio@3 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <3>;
+					interrupts = <124>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio@4 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <4>;
+					interrupts = <123>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				duart_pins_a: duart@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__DUART_RX
+						MX28_PAD_PWM1__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				duart_pins_b: duart@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				duart_4pins_a: duart-4pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+						MX28_PAD_AUART0_RX__DUART_CTS
+						MX28_PAD_AUART0_TX__DUART_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_a: gpmi-nand@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D00__GPMI_D0
+						MX28_PAD_GPMI_D01__GPMI_D1
+						MX28_PAD_GPMI_D02__GPMI_D2
+						MX28_PAD_GPMI_D03__GPMI_D3
+						MX28_PAD_GPMI_D04__GPMI_D4
+						MX28_PAD_GPMI_D05__GPMI_D5
+						MX28_PAD_GPMI_D06__GPMI_D6
+						MX28_PAD_GPMI_D07__GPMI_D7
+						MX28_PAD_GPMI_CE0N__GPMI_CE0N
+						MX28_PAD_GPMI_RDY0__GPMI_READY0
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_ALE__GPMI_ALE
+						MX28_PAD_GPMI_CLE__GPMI_CLE
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_status_cfg: gpmi-status-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+				};
+
+				auart0_pins_a: auart0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+						MX28_PAD_AUART0_CTS__AUART0_CTS
+						MX28_PAD_AUART0_RTS__AUART0_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart0_2pins_a: auart0-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart1_pins_a: auart1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+						MX28_PAD_AUART1_CTS__AUART1_CTS
+						MX28_PAD_AUART1_RTS__AUART1_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart1_2pins_a: auart1-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_2pins_a: auart2-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__AUART2_RX
+						MX28_PAD_SSP2_MOSI__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_2pins_b: auart2-2pins@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_pins_a: auart2-pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
+						MX28_PAD_AUART2_CTS__AUART2_CTS
+						MX28_PAD_AUART2_RTS__AUART2_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_pins_a: auart3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+						MX28_PAD_AUART3_CTS__AUART3_CTS
+						MX28_PAD_AUART3_RTS__AUART3_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_2pins_a: auart3-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_MISO__AUART3_RX
+						MX28_PAD_SSP2_SS0__AUART3_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_2pins_b: auart3-2pins@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart4_2pins_a: auart4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_SCK__AUART4_TX
+						MX28_PAD_SSP3_MOSI__AUART4_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart4_2pins_b: auart4@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__AUART4_RX
+						MX28_PAD_AUART0_RTS__AUART4_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_pins_a: mac0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mac0_pins_b: mac0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_RXD2__ENET0_RXD2
+						MX28_PAD_ENET0_RXD3__ENET0_RXD3
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET0_TXD2__ENET0_TXD2
+						MX28_PAD_ENET0_TXD3__ENET0_TXD3
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
+						MX28_PAD_ENET0_COL__ENET0_COL
+						MX28_PAD_ENET0_CRS__ENET0_CRS
+						MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
+						MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
+						>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mac1_pins_a: mac1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_CRS__ENET1_RX_EN
+						MX28_PAD_ENET0_RXD2__ENET1_RXD0
+						MX28_PAD_ENET0_RXD3__ENET1_RXD1
+						MX28_PAD_ENET0_COL__ENET1_TX_EN
+						MX28_PAD_ENET0_TXD2__ENET1_TXD0
+						MX28_PAD_ENET0_TXD3__ENET1_TXD1
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_8bit_pins_a: mmc0-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_DATA4__SSP0_D4
+						MX28_PAD_SSP0_DATA5__SSP0_D5
+						MX28_PAD_SSP0_DATA6__SSP0_D6
+						MX28_PAD_SSP0_DATA7__SSP0_D7
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_4bit_pins_a: mmc0-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_cd_cfg: mmc0-cd-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc0_sck_cfg: mmc0-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_4bit_pins_a: mmc1-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D00__SSP1_D0
+						MX28_PAD_GPMI_D01__SSP1_D1
+						MX28_PAD_GPMI_D02__SSP1_D2
+						MX28_PAD_GPMI_D03__SSP1_D3
+						MX28_PAD_GPMI_RDY1__SSP1_CMD
+						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+						MX28_PAD_GPMI_WRN__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc1_cd_cfg: mmc1-cd-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_sck_cfg: mmc1-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_WRN__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+
+				mmc2_4bit_pins_a: mmc2-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP1_SCK__SSP2_D1
+						MX28_PAD_SSP1_CMD__SSP2_D2
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_4bit_pins_b: mmc2-4bit@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
+						MX28_PAD_SSP2_SS1__SSP2_D1
+						MX28_PAD_SSP2_SS2__SSP2_D2
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_cd_cfg: mmc2-cd-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				i2c0_pins_a: i2c0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_I2C0_SCL__I2C0_SCL
+						MX28_PAD_I2C0_SDA__I2C0_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c0_pins_b: i2c0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__I2C0_SCL
+						MX28_PAD_AUART0_TX__I2C0_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c1_pins_a: i2c1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__I2C1_SCL
+						MX28_PAD_PWM1__I2C1_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c1_pins_b: i2c1@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_CTS__I2C1_SCL
+						MX28_PAD_AUART2_RTS__I2C1_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif0_pins_a: saif0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif0_pins_b: saif0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif1_pins_a: saif1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				pwm0_pins_a: pwm0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__PWM_0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm2_pins_a: pwm2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__PWM_2
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm3_pins_a: pwm3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM3__PWM_3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm3_pins_b: pwm3@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__PWM_3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm4_pins_a: pwm4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM4__PWM_4
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_24bit_pins_a: lcdif-24bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+						MX28_PAD_LCD_D18__LCD_D18
+						MX28_PAD_LCD_D19__LCD_D19
+						MX28_PAD_LCD_D20__LCD_D20
+						MX28_PAD_LCD_D21__LCD_D21
+						MX28_PAD_LCD_D22__LCD_D22
+						MX28_PAD_LCD_D23__LCD_D23
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_18bit_pins_a: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_16bit_pins_a: lcdif-16bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_sync_pins_a: lcdif-sync@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				can0_pins_a: can0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDY2__CAN0_TX
+						MX28_PAD_GPMI_RDY3__CAN0_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				can1_pins_a: can1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_CE2N__CAN1_TX
+						MX28_PAD_GPMI_CE3N__CAN1_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				spi2_pins_a: spi2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				spi3_pins_a: spi3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__SSP3_D4
+						MX28_PAD_AUART2_TX__SSP3_D5
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				spi3_pins_b: spi3@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				usb0_pins_a: usb0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_pins_b: usb0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb1_pins_a: usb1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb1_pins_b: usb1@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__USB1_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_id_pins_a: usb0id@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RTS__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				usb0_id_pins_b: usb0id1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+			};
+
+			digctl: digctl@8001c000 {
+				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
+				reg = <0x8001c000 0x2000>;
+				interrupts = <89>;
+				status = "disabled";
+			};
+
+			etm: etm@80022000 {
+				reg = <0x80022000 0x2000>;
+				status = "disabled";
+			};
+
+			dma_apbx: dma-apbx@80024000 {
+				compatible = "fsl,imx28-dma-apbx";
+				reg = <0x80024000 0x2000>;
+				interrupts = <78 79 66 0
+					      80 81 68 69
+					      70 71 72 73
+					      74 75 76 77>;
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 26>;
+			};
+
+			dcp: crypto@80028000 {
+				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
+				reg = <0x80028000 0x2000>;
+				interrupts = <52 53 54>;
+				status = "okay";
+			};
+
+			pxp: pxp@8002a000 {
+				reg = <0x8002a000 0x2000>;
+				interrupts = <39>;
+				status = "disabled";
+			};
+
+			ocotp: efuse@8002c000 {
+				compatible = "fsl,imx28-ocotp", "fsl,ocotp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8002c000 0x2000>;
+				clocks = <&clks 25>;
+			};
+
+			axi-ahb@8002e000 {
+				reg = <0x8002e000 0x2000>;
+				status = "disabled";
+			};
+
+			lcdif: lcdif@80030000 {
+				compatible = "fsl,imx28-lcdif";
+				reg = <0x80030000 0x2000>;
+				interrupts = <38>;
+				clocks = <&clks 55>;
+				dmas = <&dma_apbh 13>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			can0: can@80032000 {
+				compatible = "fsl,imx28-flexcan";
+				reg = <0x80032000 0x2000>;
+				interrupts = <8>;
+				clocks = <&clks 58>, <&clks 58>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can1: can@80034000 {
+				compatible = "fsl,imx28-flexcan";
+				reg = <0x80034000 0x2000>;
+				interrupts = <9>;
+				clocks = <&clks 59>, <&clks 59>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			simdbg: simdbg@8003c000 {
+				reg = <0x8003c000 0x200>;
+				status = "disabled";
+			};
+
+			simgpmisel: simgpmisel@8003c200 {
+				reg = <0x8003c200 0x100>;
+				status = "disabled";
+			};
+
+			simsspsel: simsspsel@8003c300 {
+				reg = <0x8003c300 0x100>;
+				status = "disabled";
+			};
+
+			simmemsel: simmemsel@8003c400 {
+				reg = <0x8003c400 0x100>;
+				status = "disabled";
+			};
+
+			gpiomon: gpiomon@8003c500 {
+				reg = <0x8003c500 0x100>;
+				status = "disabled";
+			};
+
+			simenet: simenet@8003c700 {
+				reg = <0x8003c700 0x100>;
+				status = "disabled";
+			};
+
+			armjtag: armjtag@8003c800 {
+				reg = <0x8003c800 0x100>;
+				status = "disabled";
+			};
+		};
+
+		apbx@80040000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80040000 0x40000>;
+			ranges;
+
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+				reg = <0x80040000 0x2000>;
+				#clock-cells = <1>;
+			};
+
+			saif0: saif@80042000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx28-saif";
+				reg = <0x80042000 0x2000>;
+				interrupts = <59>;
+				#clock-cells = <0>;
+				clocks = <&clks 53>;
+				dmas = <&dma_apbx 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			power: power@80044000 {
+				reg = <0x80044000 0x2000>;
+				status = "disabled";
+			};
+
+			saif1: saif@80046000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx28-saif";
+				reg = <0x80046000 0x2000>;
+				interrupts = <58>;
+				clocks = <&clks 54>;
+				dmas = <&dma_apbx 5>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			lradc: lradc@80050000 {
+				compatible = "fsl,imx28-lradc";
+				reg = <0x80050000 0x2000>;
+				interrupts = <10 14 15 16 17 18 19
+						20 21 22 23 24 25>;
+				status = "disabled";
+				clocks = <&clks 41>;
+				#io-channel-cells = <1>;
+			};
+
+			spdif: spdif@80054000 {
+				reg = <0x80054000 0x2000>;
+				interrupts = <45>;
+				dmas = <&dma_apbx 2>;
+				dma-names = "tx";
+				status = "disabled";
+			};
+
+			mxs_rtc: rtc@80056000 {
+				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+				reg = <0x80056000 0x2000>;
+				interrupts = <29>;
+			};
+
+			i2c0: i2c@80058000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x80058000 0x2000>;
+				interrupts = <111>;
+				clock-frequency = <100000>;
+				dmas = <&dma_apbx 6>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			i2c1: i2c@8005a000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x8005a000 0x2000>;
+				interrupts = <110>;
+				clock-frequency = <100000>;
+				dmas = <&dma_apbx 7>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			pwm: pwm@80064000 {
+				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
+				reg = <0x80064000 0x2000>;
+				clocks = <&clks 44>;
+				#pwm-cells = <2>;
+				fsl,pwm-number = <8>;
+				status = "disabled";
+			};
+
+			timer: timrot@80068000 {
+				compatible = "fsl,imx28-timrot", "fsl,timrot";
+				reg = <0x80068000 0x2000>;
+				interrupts = <48 49 50 51>;
+				clocks = <&clks 26>;
+			};
+
+			auart0: serial@8006a000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006a000 0x2000>;
+				interrupts = <112>;
+				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart1: serial@8006c000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006c000 0x2000>;
+				interrupts = <113>;
+				dmas = <&dma_apbx 10>, <&dma_apbx 11>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart2: serial@8006e000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006e000 0x2000>;
+				interrupts = <114>;
+				dmas = <&dma_apbx 12>, <&dma_apbx 13>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart3: serial@80070000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x80070000 0x2000>;
+				interrupts = <115>;
+				dmas = <&dma_apbx 14>, <&dma_apbx 15>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart4: serial@80072000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x80072000 0x2000>;
+				interrupts = <116>;
+				dmas = <&dma_apbx 0>, <&dma_apbx 1>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			duart: serial@80074000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x80074000 0x1000>;
+				interrupts = <47>;
+				clocks = <&clks 45>, <&clks 26>;
+				clock-names = "uart", "apb_pclk";
+				status = "disabled";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 62>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+				reg = <0x8007e000 0x2000>;
+				clocks = <&clks 63>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80080000 0x80000>;
+		ranges;
+
+		usb0: usb@80080000 {
+			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+			reg = <0x80080000 0x10000>;
+			interrupts = <93>;
+			clocks = <&clks 60>;
+			fsl,usbphy = <&usbphy0>;
+			status = "disabled";
+		};
+
+		usb1: usb@80090000 {
+			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+			reg = <0x80090000 0x10000>;
+			interrupts = <92>;
+			clocks = <&clks 61>;
+			fsl,usbphy = <&usbphy1>;
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		dflpt: dflpt@800c0000 {
+			reg = <0x800c0000 0x10000>;
+			status = "disabled";
+		};
+
+		mac0: ethernet@800f0000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f0000 0x4000>;
+			interrupts = <101>;
+			clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+			clock-names = "ipg", "ahb", "enet_out";
+			status = "disabled";
+		};
+
+		mac1: ethernet@800f4000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f4000 0x4000>;
+			interrupts = <102>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
+			status = "disabled";
+		};
+
+		eth_switch: switch@800f8000 {
+			reg = <0x800f8000 0x8000>;
+			status = "disabled";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&lradc 8>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/mxs-pinfunc.h b/arch/arm/boot/dts/nxp/mxs/mxs-pinfunc.h
new file mode 100644
index 0000000000000..31297abcbc715
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/mxs-pinfunc.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
+#define __DT_BINDINGS_MXS_PINCTRL_H__
+
+/* fsl,drive-strength property */
+#define MXS_DRIVE_4mA		0
+#define MXS_DRIVE_8mA		1
+#define MXS_DRIVE_12mA		2
+#define MXS_DRIVE_16mA		3
+
+/* fsl,voltage property */
+#define MXS_VOLTAGE_LOW		0
+#define MXS_VOLTAGE_HIGH	1
+
+/* fsl,pull-up property */
+#define MXS_PULL_DISABLE	0
+#define MXS_PULL_ENABLE		1
+
+#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/nxp/vf/Makefile b/arch/arm/boot/dts/nxp/vf/Makefile
new file mode 100644
index 0000000000000..0a4a7f9dd43e4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_VF610) += \
+	vf500-colibri-eval-v3.dtb \
+	vf610-bk4.dtb \
+	vf610-colibri-eval-v3.dtb \
+	vf610m4-colibri.dtb \
+	vf610-cosmic.dtb \
+	vf610m4-cosmic.dtb \
+	vf610-twr.dtb \
+	vf610-zii-cfu1.dtb \
+	vf610-zii-dev-rev-b.dtb \
+	vf610-zii-dev-rev-c.dtb \
+	vf610-zii-scu4-aib.dtb \
+	vf610-zii-spb4.dtb \
+	vf610-zii-ssmb-dtu.dtb \
+	vf610-zii-ssmb-spu3.dtb
diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
new file mode 100644
index 0000000000000..14c411f146f50
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk16m: clk16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	panel: panel {
+		compatible = "edt,et057090dhu";
+		backlight = <&bl>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&bl {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	power-supply = <&reg_3v3>;
+	status  = "okay";
+};
+
+&dcu0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dcu0_1>;
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&dspi1 {
+	status = "okay";
+
+	mcp2515can: can@0 {
+		compatible = "microchip,mcp2515";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		reg = <0>;
+		clocks = <&clk16m>;
+		spi-max-frequency = <10000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_module_3v3 {
+	vin-supply = <&reg_3v3>;
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh_vbus>;
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_can_int: can_int {
+			fsl,pins = <
+				VF610_PAD_PTB21__GPIO_43	0x22ed
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi
new file mode 100644
index 0000000000000..cc1e069c44e62
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ *
+ */
+
+/ {
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec0;
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		pwms = <&pwm0 0 5000000 0>;
+		enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&reg_module_3v3_avdd>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&reg_module_3v3_avdd>;
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan0>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&clks {
+	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+			  <&clks VF610_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
+				 <&clks VF610_CLK_ENET_50M>;
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	phy-supply = <&reg_module_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <32>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_flexcan0: can0grp {
+			fsl,pins = <
+				VF610_PAD_PTB14__CAN0_RX	0x31F1
+				VF610_PAD_PTB15__CAN0_TX	0x31F2
+			>;
+		};
+
+		pinctrl_flexcan1: can1grp {
+			fsl,pins = <
+				VF610_PAD_PTB16__CAN1_RX	0x31F1
+				VF610_PAD_PTB17__CAN1_TX	0x31F2
+			>;
+		};
+
+		pinctrl_gpio_ext: gpio_ext {
+			fsl,pins = <
+				VF610_PAD_PTD10__GPIO_89	0x22ed /* EXT_IO_0 */
+				VF610_PAD_PTD9__GPIO_88		0x22ed /* EXT_IO_1 */
+				VF610_PAD_PTD26__GPIO_68	0x22ed /* EXT_IO_2 */
+			>;
+		};
+
+		pinctrl_dcu0_1: dcu0grp_1 {
+			fsl,pins = <
+				VF610_PAD_PTE0__DCU0_HSYNC	0x1902
+				VF610_PAD_PTE1__DCU0_VSYNC	0x1902
+				VF610_PAD_PTE2__DCU0_PCLK	0x1902
+				VF610_PAD_PTE4__DCU0_DE		0x1902
+				VF610_PAD_PTE5__DCU0_R0		0x1902
+				VF610_PAD_PTE6__DCU0_R1		0x1902
+				VF610_PAD_PTE7__DCU0_R2		0x1902
+				VF610_PAD_PTE8__DCU0_R3		0x1902
+				VF610_PAD_PTE9__DCU0_R4		0x1902
+				VF610_PAD_PTE10__DCU0_R5	0x1902
+				VF610_PAD_PTE11__DCU0_R6	0x1902
+				VF610_PAD_PTE12__DCU0_R7	0x1902
+				VF610_PAD_PTE13__DCU0_G0	0x1902
+				VF610_PAD_PTE14__DCU0_G1	0x1902
+				VF610_PAD_PTE15__DCU0_G2	0x1902
+				VF610_PAD_PTE16__DCU0_G3	0x1902
+				VF610_PAD_PTE17__DCU0_G4	0x1902
+				VF610_PAD_PTE18__DCU0_G5	0x1902
+				VF610_PAD_PTE19__DCU0_G6	0x1902
+				VF610_PAD_PTE20__DCU0_G7	0x1902
+				VF610_PAD_PTE21__DCU0_B0	0x1902
+				VF610_PAD_PTE22__DCU0_B1	0x1902
+				VF610_PAD_PTE23__DCU0_B2	0x1902
+				VF610_PAD_PTE24__DCU0_B3	0x1902
+				VF610_PAD_PTE25__DCU0_B4	0x1902
+				VF610_PAD_PTE26__DCU0_B5	0x1902
+				VF610_PAD_PTE27__DCU0_B6	0x1902
+				VF610_PAD_PTE28__DCU0_B7	0x1902
+			>;
+		};
+
+		pinctrl_dspi1: dspi1grp {
+			fsl,pins = <
+				VF610_PAD_PTD5__DSPI1_CS0		0x33e2
+				VF610_PAD_PTD6__DSPI1_SIN		0x33e1
+				VF610_PAD_PTD7__DSPI1_SOUT		0x33e2
+				VF610_PAD_PTD8__DSPI1_SCK		0x33e2
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTB20__GPIO_42	0x219d
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTA6__RMII_CLKOUT		0x30d2
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_gpio_bl_on: gpio_bl_on {
+			fsl,pins = <
+				VF610_PAD_PTC0__GPIO_45		0x22ef
+			>;
+		};
+
+		pinctrl_i2c0: i2c0grp {
+			fsl,pins = <
+				VF610_PAD_PTB14__I2C0_SCL		0x37ff
+				VF610_PAD_PTB15__I2C0_SDA		0x37ff
+			>;
+		};
+
+		pinctrl_i2c0_gpio: i2c0gpiogrp {
+			fsl,pins = <
+				VF610_PAD_PTB14__GPIO_36		0x37ff
+				VF610_PAD_PTB15__GPIO_37		0x37ff
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				VF610_PAD_PTD23__NF_IO7		0x28df
+				VF610_PAD_PTD22__NF_IO6		0x28df
+				VF610_PAD_PTD21__NF_IO5		0x28df
+				VF610_PAD_PTD20__NF_IO4		0x28df
+				VF610_PAD_PTD19__NF_IO3		0x28df
+				VF610_PAD_PTD18__NF_IO2		0x28df
+				VF610_PAD_PTD17__NF_IO1		0x28df
+				VF610_PAD_PTD16__NF_IO0		0x28df
+				VF610_PAD_PTB24__NF_WE_B	0x28c2
+				VF610_PAD_PTB25__NF_CE0_B	0x28c2
+				VF610_PAD_PTB27__NF_RE_B	0x28c2
+				VF610_PAD_PTC26__NF_RB_B	0x283d
+				VF610_PAD_PTC27__NF_ALE		0x28c2
+				VF610_PAD_PTC28__NF_CLE		0x28c2
+			>;
+		};
+
+		pinctrl_pwm0: pwm0grp {
+			fsl,pins = <
+				VF610_PAD_PTB0__FTM0_CH0		0x1182
+				VF610_PAD_PTB1__FTM0_CH1		0x1182
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				VF610_PAD_PTB8__FTM1_CH0		0x1182
+				VF610_PAD_PTB9__FTM1_CH1		0x1182
+			>;
+		};
+
+		pinctrl_uart0: uart0grp {
+			fsl,pins = <
+				VF610_PAD_PTB10__UART0_TX		0x21a2
+				VF610_PAD_PTB11__UART0_RX		0x21a1
+				VF610_PAD_PTB12__UART0_RTS		0x21a2
+				VF610_PAD_PTB13__UART0_CTS		0x21a1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				VF610_PAD_PTD0__UART2_TX		0x21a2
+				VF610_PAD_PTD1__UART2_RX		0x21a1
+				VF610_PAD_PTD2__UART2_RTS		0x21a2
+				VF610_PAD_PTD3__UART2_CTS		0x21a1
+			>;
+		};
+
+		pinctrl_usbh1_reg: gpio_usb_vbus {
+			fsl,pins = <
+				VF610_PAD_PTD4__GPIO_83			0x22ed
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/vf/vf500-colibri-eval-v3.dts
new file mode 100644
index 0000000000000..088964f8dc4b7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf500-colibri-eval-v3.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+/dts-v1/;
+#include "vf500-colibri.dtsi"
+#include "vf-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri VF50 on Colibri Evaluation Board";
+	compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500";
+};
+
+&touchscreen {
+	vf50-ts-min-pressure = <200>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi
new file mode 100644
index 0000000000000..8af7ed56e6539
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+#include "vf500.dtsi"
+#include "vf-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri VF50 COM";
+	compatible = "toradex,vf500-colibri_vf50", "fsl,vf500";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	touchscreen: vf50-touchscreen {
+		compatible = "toradex,vf50-touchscreen";
+		io-channels = <&adc1 0>,<&adc0 0>,
+				<&adc0 1>,<&adc1 2>;
+		xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "idle","default","gpios";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>;
+		pinctrl-1 = <&pinctrl_touchctrl_default>;
+		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+		vf50-ts-min-pressure = <200>;
+		status = "disabled";
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_touchctrl_idle: touchctrl_idle {
+			fsl,pins = <
+				VF610_PAD_PTA18__GPIO_8		0x006d
+				VF610_PAD_PTA19__GPIO_9		0x006c
+				>;
+		};
+
+		pinctrl_touchctrl_default: touchctrl_default {
+			fsl,pins = <
+				VF610_PAD_PTA18__ADC0_SE0	0x0040
+				VF610_PAD_PTA19__ADC0_SE1	0x0040
+				VF610_PAD_PTA16__ADC1_SE0	0x0040
+				VF610_PAD_PTB2__ADC1_SE2	0x0040
+				>;
+		};
+
+		pinctrl_touchctrl_gpios: touchctrl_gpios {
+			fsl,pins = <
+				VF610_PAD_PTA23__GPIO_13	0x22e9
+				VF610_PAD_PTB23__GPIO_93	0x22e9
+				VF610_PAD_PTA22__GPIO_12	0x22e9
+				VF610_PAD_PTA11__GPIO_4		0x22e9
+				>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf500.dtsi b/arch/arm/boot/dts/nxp/vf/vf500.dtsi
new file mode 100644
index 0000000000000..0c0dd442300a3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf500.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include "vfxxx.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a5_cpu: cpu@0 {
+			compatible = "arm,cortex-a5";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	soc {
+		bus@40000000 {
+
+			intc: interrupt-controller@40003000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				interrupt-parent = <&intc>;
+				reg = <0x40003000 0x1000>,
+				      <0x40002100 0x100>;
+			};
+
+			global_timer: timer@40002200 {
+				compatible = "arm,cortex-a9-global-timer";
+				reg = <0x40002200 0x20>;
+				interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks VF610_CLK_PLATFORM_BUS>;
+			};
+		};
+
+		bus@40080000 {
+			pmu@40089000 {
+				compatible = "arm,cortex-a5-pmu";
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-affinity = <&a5_cpu>;
+				reg = <0x40089000 0x1000>;
+			};
+		};
+
+	};
+};
+
+&mscm_ir {
+	interrupt-parent = <&intc>;
+};
+
+&wdoga5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
new file mode 100644
index 0000000000000..e4f691d601cc2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
@@ -0,0 +1,537 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "Liebherr BK4 controller";
+	compatible = "lwn,bk4", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	audio_ext: oscillator-audio {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	enet_ext: oscillator-ethernet {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		/* LED D5 */
+		led0: led-heartbeat {
+			label = "heartbeat";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc3v3mcu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		pinctrl-0 = <&pinctrl_gpio_spi>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* PTD12 ->RPIO[91] */
+		sck-gpios  = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		/* PTD10 ->RPIO[89] */
+		miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <0>;
+
+		gpio@0 {
+			compatible = "pisosr-gpio";
+			reg = <0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* PTB18 -> RGPIO[40] */
+			load-gpios  = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			spi-max-frequency = <100000>;
+		};
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
+	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+};
+
+&dspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0>;
+	bus-num = <0>;
+	status = "okay";
+
+	spidev0@0 {
+		compatible = "lwn,bk4";
+		spi-max-frequency = <30000000>;
+		reg = <0>;
+		fsl,spi-cs-sck-delay = <200>;
+		fsl,spi-sck-cs-delay = <400>;
+	};
+};
+
+&dspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi3>;
+	bus-num = <3>;
+	status = "okay";
+	spi-slave;
+	#address-cells = <0>;
+
+	slave {
+		compatible = "lwn,bk4";
+		spi-max-frequency = <30000000>;
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec0 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			reg = <1>;
+			clocks = <&clks VF610_CLK_ENET_50M>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			clocks = <&clks VF610_CLK_ENET_50M>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24c256: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	m41t62: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <16>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi0>;
+	status = "okay";
+
+	n25q128a13_4: flash@0 {
+		compatible = "n25q128a13", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+	};
+
+	n25q128a13_2: flash@2 {
+		compatible = "n25q128a13", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <2>;
+		reg = <2>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* One_Wire_PSU_EN */
+			VF610_PAD_PTC29__GPIO_102		0x1183
+			/* SPI ENABLE */
+			VF610_PAD_PTB26__GPIO_96		0x1183
+			/* EB control */
+			VF610_PAD_PTE14__GPIO_119		0x1183
+			VF610_PAD_PTE4__GPIO_109		0x1181
+			/* Feedback_Lines */
+			VF610_PAD_PTC31__GPIO_104		0x1181
+			VF610_PAD_PTA7__GPIO_134		0x1181
+			VF610_PAD_PTD9__GPIO_88		0x1181
+			VF610_PAD_PTE1__GPIO_106		0x1183
+			VF610_PAD_PTB2__GPIO_24		0x1181
+			VF610_PAD_PTB3__GPIO_25		0x1181
+			VF610_PAD_PTB1__GPIO_23		0x1181
+			/* SDHC Enable */
+			VF610_PAD_PTE19__GPIO_124		0x1183
+			/* SDHC Overcurrent */
+			VF610_PAD_PTB23__GPIO_93		0x1181
+			/* GPI */
+			VF610_PAD_PTE2__GPIO_107		0x1181
+			VF610_PAD_PTE3__GPIO_108		0x1181
+			VF610_PAD_PTE5__GPIO_110		0x1181
+			VF610_PAD_PTE6__GPIO_111		0x1181
+			/* GPO */
+			VF610_PAD_PTE0__GPIO_105		0x1183
+			VF610_PAD_PTE7__GPIO_112		0x1183
+			/* RS485 Control */
+			VF610_PAD_PTB8__GPIO_30		0x1183
+			VF610_PAD_PTB9__GPIO_31		0x1183
+			VF610_PAD_PTE8__GPIO_113		0x1183
+			/* MPBUS MPB_EN */
+			VF610_PAD_PTE28__GPIO_133		0x1183
+			/* MISC */
+			VF610_PAD_PTE10__GPIO_115		0x1183
+			VF610_PAD_PTE11__GPIO_116		0x1183
+			VF610_PAD_PTE17__GPIO_122		0x1183
+			VF610_PAD_PTC30__GPIO_103		0x1183
+			VF610_PAD_PTB0__GPIO_22		0x1181
+			/* RESETINFO */
+			VF610_PAD_PTE26__GPIO_131		0x1183
+			VF610_PAD_PTD6__GPIO_85		0x1181
+			VF610_PAD_PTE27__GPIO_132		0x1181
+			VF610_PAD_PTE13__GPIO_118		0x1181
+			VF610_PAD_PTE21__GPIO_126		0x1181
+			VF610_PAD_PTE22__GPIO_127		0x1181
+			/* EE_5V_EN */
+			VF610_PAD_PTE18__GPIO_123		0x1183
+			/* EE_5V_OC_N */
+			VF610_PAD_PTE25__GPIO_130		0x1181
+		>;
+	};
+
+	pinctrl_can0: can0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__CAN0_RX		0x1181
+			VF610_PAD_PTB15__CAN0_TX		0x1182
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__CAN1_RX		0x1181
+			VF610_PAD_PTB17__CAN1_TX		0x1182
+		>;
+	};
+
+	pinctrl_dspi0: dspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTB18__DSPI0_CS1		0x1182
+			VF610_PAD_PTB19__DSPI0_CS0		0x1182
+			VF610_PAD_PTB20__DSPI0_SIN		0x1181
+			VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+			VF610_PAD_PTB22__DSPI0_SCK		0x1182
+		>;
+	};
+
+	pinctrl_dspi3: dspi3grp {
+		fsl,pins = <
+			VF610_PAD_PTD10__DSPI3_CS0		0x1181
+			VF610_PAD_PTD11__DSPI3_SIN		0x1181
+			VF610_PAD_PTD12__DSPI3_SOUT		0x1182
+			VF610_PAD_PTD13__DSPI3_SCK		0x1181
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+			VF610_PAD_PTB28__GPIO_98		0x219d
+		>;
+	};
+
+	pinctrl_fec0: fec0grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30dd
+			VF610_PAD_PTC0__ENET_RMII0_MDC		0x30de
+			VF610_PAD_PTC1__ENET_RMII0_MDIO	0x30df
+			VF610_PAD_PTC2__ENET_RMII0_CRS		0x30dd
+			VF610_PAD_PTC3__ENET_RMII0_RXD1	0x30dd
+			VF610_PAD_PTC4__ENET_RMII0_RXD0	0x30dd
+			VF610_PAD_PTC5__ENET_RMII0_RXER	0x30dd
+			VF610_PAD_PTC6__ENET_RMII0_TXD1	0x30de
+			VF610_PAD_PTC7__ENET_RMII0_TXD0	0x30de
+			VF610_PAD_PTC8__ENET_RMII0_TXEN	0x30de
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30de
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30df
+			VF610_PAD_PTC11__ENET_RMII1_CRS	0x30dd
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30dd
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30dd
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30dd
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30de
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30de
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30de
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			/* Heart bit LED */
+			VF610_PAD_PTE12__GPIO_117	0x1183
+			/* LEDS */
+			VF610_PAD_PTE15__GPIO_120	0x1183
+			VF610_PAD_PTA12__GPIO_5	0x1183
+			VF610_PAD_PTA16__GPIO_6	0x1183
+			VF610_PAD_PTE9__GPIO_114	0x1183
+			VF610_PAD_PTE20__GPIO_125	0x1183
+			VF610_PAD_PTE23__GPIO_128	0x1183
+			VF610_PAD_PTE16__GPIO_121	0x1183
+		>;
+	};
+
+	pinctrl_gpio_spi: pinctrl-gpio-spi {
+		fsl,pins = <
+			VF610_PAD_PTB18__GPIO_40        0x1183
+			VF610_PAD_PTD10__GPIO_89        0x1183
+			VF610_PAD_PTD12__GPIO_91        0x1183
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			VF610_PAD_PTA22__I2C2_SCL               0x34df
+			VF610_PAD_PTA23__I2C2_SDA               0x34df
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			VF610_PAD_PTD23__NF_IO7		0x28df
+			VF610_PAD_PTD22__NF_IO6		0x28df
+			VF610_PAD_PTD21__NF_IO5		0x28df
+			VF610_PAD_PTD20__NF_IO4		0x28df
+			VF610_PAD_PTD19__NF_IO3		0x28df
+			VF610_PAD_PTD18__NF_IO2		0x28df
+			VF610_PAD_PTD17__NF_IO1		0x28df
+			VF610_PAD_PTD16__NF_IO0		0x28df
+			VF610_PAD_PTB24__NF_WE_B		0x28c2
+			VF610_PAD_PTB25__NF_CE0_B		0x28c2
+			VF610_PAD_PTB27__NF_RE_B		0x28c2
+			VF610_PAD_PTC26__NF_RB_B		0x283d
+			VF610_PAD_PTC27__NF_ALE		0x28c2
+			VF610_PAD_PTC28__NF_CLE		0x28c2
+		>;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__QSPI0_A_QSCK	0x397f
+			VF610_PAD_PTD1__QSPI0_A_CS0	0x397f
+			VF610_PAD_PTD2__QSPI0_A_DATA3	0x397f
+			VF610_PAD_PTD3__QSPI0_A_DATA2	0x397f
+			VF610_PAD_PTD4__QSPI0_A_DATA1	0x397f
+			VF610_PAD_PTD5__QSPI0_A_DATA0	0x397f
+			VF610_PAD_PTD7__QSPI0_B_QSCK	0x397f
+			VF610_PAD_PTD8__QSPI0_B_CS0	0x397f
+			VF610_PAD_PTD11__QSPI0_B_DATA1	0x397f
+			VF610_PAD_PTD12__QSPI0_B_DATA0	0x397f
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB4__UART1_TX		0x21a2
+			VF610_PAD_PTB5__UART1_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTB6__UART2_TX		0x21a2
+			VF610_PAD_PTB7__UART2_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			VF610_PAD_PTA20__UART3_TX		0x21a2
+			VF610_PAD_PTA21__UART3_RX		0x21a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/vf/vf610-colibri-eval-v3.dts
new file mode 100644
index 0000000000000..fb661e8a2dc67
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-colibri-eval-v3.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+/dts-v1/;
+#include "vf610-colibri.dtsi"
+#include "vf-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri VF61 on Colibri Evaluation Board";
+	compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610";
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi
new file mode 100644
index 0000000000000..607cec2df8615
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+#include "vf610.dtsi"
+#include "vf-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri VF61 COM";
+	compatible = "toradex,vf610-colibri_vf61", "fsl,vf610";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <50000000>;
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts b/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts
new file mode 100644
index 0000000000000..703f375d7e240
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013 Linaro Limited
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "PHYTEC Cosmic/Cosmic+ Board";
+	compatible = "phytec,vf610-cosmic", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	enet_ext: enet_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+};
+
+&clks {
+	clocks = <&sxosc>, <&fxosc>, <&enet_ext>;
+	clock-names = "sxosc", "fxosc", "enet_ext";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-cosmic {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTB28__GPIO_98	0x219d
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-pinfunc.h b/arch/arm/boot/dts/nxp/vf/vf610-pinfunc.h
new file mode 100644
index 0000000000000..b7b7322a2d1bc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-pinfunc.h
@@ -0,0 +1,856 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_VF610_PINFUNC_H
+#define __DTS_VF610_PINFUNC_H
+
+/*
+ * The pin function ID for VF610 is a tuple of:
+ * <mux_reg input_reg mux_mode input_val>
+ */
+
+#define ALT0	0x0
+#define ALT1	0x1
+#define ALT2	0x2
+#define ALT3	0x3
+#define ALT4	0x4
+#define ALT5	0x5
+#define ALT6	0x6
+#define ALT7	0x7
+
+
+#define VF610_PAD_PTA6__GPIO_0			0x000 0x000 ALT0 0x0
+#define VF610_PAD_PTA6__RMII_CLKOUT		0x000 0x000 ALT1 0x0
+#define VF610_PAD_PTA6__RMII_CLKIN		0x000 0x2F0 ALT2 0x0
+#define VF610_PAD_PTA6__DCU1_TCON11		0x000 0x000 ALT4 0x0
+#define VF610_PAD_PTA6__DCU1_R2			0x000 0x000 ALT7 0x0
+#define VF610_PAD_PTA8__GPIO_1			0x004 0x000 ALT0 0x0
+#define VF610_PAD_PTA8__TCLK			0x004 0x000 ALT1 0x0
+#define VF610_PAD_PTA8__DCU0_R0			0x004 0x000 ALT4 0x0
+#define VF610_PAD_PTA8__MLB_CLK			0x004 0x354 ALT7 0x0
+#define VF610_PAD_PTA9__GPIO_2			0x008 0x000 ALT0 0x0
+#define VF610_PAD_PTA9__TDI			0x008 0x000 ALT1 0x0
+#define VF610_PAD_PTA9__RMII_CLKOUT		0x008 0x000 ALT2 0x0
+#define VF610_PAD_PTA9__RMII_CLKIN		0x008 0x2F0 ALT3 0x1
+#define VF610_PAD_PTA9__DCU0_R1			0x008 0x000 ALT4 0x0
+#define VF610_PAD_PTA9__WDOG_B			0x008 0x000 ALT6 0x0
+#define VF610_PAD_PTA10__GPIO_3			0x00C 0x000 ALT0 0x0
+#define VF610_PAD_PTA10__TDO			0x00C 0x000 ALT1 0x0
+#define VF610_PAD_PTA10__EXT_AUDIO_MCLK		0x00C 0x2EC ALT2 0x0
+#define VF610_PAD_PTA10__DCU0_G0		0x00C 0x000 ALT4 0x0
+#define VF610_PAD_PTA10__ENET_TS_CLKIN		0x00C 0x2F4 ALT6 0x0
+#define VF610_PAD_PTA10__MLB_SIGNAL		0x00C 0x35C ALT7 0x0
+#define VF610_PAD_PTA11__GPIO_4			0x010 0x000 ALT0 0x0
+#define VF610_PAD_PTA11__TMS			0x010 0x000 ALT1 0x0
+#define VF610_PAD_PTA11__DCU0_G1		0x010 0x000 ALT4 0x0
+#define VF610_PAD_PTA11__MLB_DATA		0x010 0x358 ALT7 0x0
+#define VF610_PAD_PTA12__GPIO_5			0x014 0x000 ALT0 0x0
+#define VF610_PAD_PTA12__TRACECK		0x014 0x000 ALT1 0x0
+#define VF610_PAD_PTA12__EXT_AUDIO_MCLK		0x014 0x2EC ALT2 0x1
+#define VF610_PAD_PTA12__VIU_DATA13		0x014 0x000 ALT6 0x0
+#define VF610_PAD_PTA12__I2C0_SCL		0x014 0x33C ALT7 0x0
+#define VF610_PAD_PTA16__GPIO_6			0x018 0x000 ALT0 0x0
+#define VF610_PAD_PTA16__TRACED0		0x018 0x000 ALT1 0x0
+#define VF610_PAD_PTA16__USB0_VBUS_EN		0x018 0x000 ALT2 0x0
+#define VF610_PAD_PTA16__ADC1_SE0		0x018 0x000 ALT3 0x0
+#define VF610_PAD_PTA16__LCD29			0x018 0x000 ALT4 0x0
+#define VF610_PAD_PTA16__SAI2_TX_BCLK		0x018 0x370 ALT5 0x0
+#define VF610_PAD_PTA16__VIU_DATA14		0x018 0x000 ALT6 0x0
+#define VF610_PAD_PTA16__I2C0_SDA		0x018 0x340 ALT7 0x0
+#define VF610_PAD_PTA17__GPIO_7			0x01C 0x000 ALT0 0x0
+#define VF610_PAD_PTA17__TRACED1		0x01C 0x000 ALT1 0x0
+#define VF610_PAD_PTA17__USB0_VBUS_OC		0x01C 0x000 ALT2 0x0
+#define VF610_PAD_PTA17__ADC1_SE1		0x01C 0x000 ALT3 0x0
+#define VF610_PAD_PTA17__LCD30			0x01C 0x000 ALT4 0x0
+#define VF610_PAD_PTA17__USB0_SOF_PULSE		0x01C 0x000 ALT5 0x0
+#define VF610_PAD_PTA17__VIU_DATA15		0x01C 0x000 ALT6 0x0
+#define VF610_PAD_PTA17__I2C1_SCL		0x01C 0x344 ALT7 0x0
+#define VF610_PAD_PTA18__GPIO_8			0x020 0x000 ALT0 0x0
+#define VF610_PAD_PTA18__TRACED2		0x020 0x000 ALT1 0x0
+#define VF610_PAD_PTA18__ADC0_SE0		0x020 0x000 ALT2 0x0
+#define VF610_PAD_PTA18__FTM1_QD_PHA		0x020 0x334 ALT3 0x0
+#define VF610_PAD_PTA18__LCD31			0x020 0x000 ALT4 0x0
+#define VF610_PAD_PTA18__SAI2_TX_DATA		0x020 0x000 ALT5 0x0
+#define VF610_PAD_PTA18__VIU_DATA16		0x020 0x000 ALT6 0x0
+#define VF610_PAD_PTA18__I2C1_SDA		0x020 0x348 ALT7 0x0
+#define VF610_PAD_PTA19__GPIO_9			0x024 0x000 ALT0 0x0
+#define VF610_PAD_PTA19__TRACED3		0x024 0x000 ALT1 0x0
+#define VF610_PAD_PTA19__ADC0_SE1		0x024 0x000 ALT2 0x0
+#define VF610_PAD_PTA19__FTM1_QD_PHB		0x024 0x338 ALT3 0x0
+#define VF610_PAD_PTA19__LCD32			0x024 0x000 ALT4 0x0
+#define VF610_PAD_PTA19__SAI2_TX_SYNC		0x024 0x000 ALT5 0x0
+#define VF610_PAD_PTA19__VIU_DATA17		0x024 0x000 ALT6 0x0
+#define VF610_PAD_PTA19__QSPI1_A_QSCK		0x024 0x374 ALT7 0x0
+#define VF610_PAD_PTA20__GPIO_10		0x028 0x000 ALT0 0x0
+#define VF610_PAD_PTA20__TRACED4		0x028 0x000 ALT1 0x0
+#define VF610_PAD_PTA20__LCD33			0x028 0x000 ALT4 0x0
+#define VF610_PAD_PTA20__UART3_TX		0x028 0x394 ALT6 0x0
+#define VF610_PAD_PTA20__DCU1_HSYNC		0x028 0x000 ALT7 0x0
+#define VF610_PAD_PTA21__GPIO_11		0x02C 0x000 ALT0 0x0
+#define VF610_PAD_PTA21__TRACED5		0x02C 0x000 ALT1 0x0
+#define VF610_PAD_PTA21__SAI2_RX_BCLK		0x02C 0x364 ALT5 0x0
+#define VF610_PAD_PTA21__UART3_RX		0x02C 0x390 ALT6 0x0
+#define VF610_PAD_PTA21__DCU1_VSYNC		0x02C 0x000 ALT7 0x0
+#define VF610_PAD_PTA22__GPIO_12		0x030 0x000 ALT0 0x0
+#define VF610_PAD_PTA22__TRACED6		0x030 0x000 ALT1 0x0
+#define VF610_PAD_PTA22__SAI2_RX_DATA		0x030 0x368 ALT5 0x0
+#define VF610_PAD_PTA22__I2C2_SCL		0x030 0x34C ALT6 0x0
+#define VF610_PAD_PTA22__DCU1_TAG		0x030 0x000 ALT7 0x0
+#define VF610_PAD_PTA23__GPIO_13		0x034 0x000 ALT0 0x0
+#define VF610_PAD_PTA23__TRACED7		0x034 0x000 ALT1 0x0
+#define VF610_PAD_PTA23__SAI2_RX_SYNC		0x034 0x36C ALT5 0x0
+#define VF610_PAD_PTA23__I2C2_SDA		0x034 0x350 ALT6 0x0
+#define VF610_PAD_PTA23__DCU1_DE		0x034 0x000 ALT7 0x0
+#define VF610_PAD_PTA24__GPIO_14		0x038 0x000 ALT0 0x0
+#define VF610_PAD_PTA24__TRACED8		0x038 0x000 ALT1 0x0
+#define VF610_PAD_PTA24__USB1_VBUS_EN		0x038 0x000 ALT2 0x0
+#define VF610_PAD_PTA24__ESDHC1_CLK		0x038 0x000 ALT5 0x0
+#define VF610_PAD_PTA24__DCU1_TCON4		0x038 0x000 ALT6 0x0
+#define VF610_PAD_PTA24__DDR_TEST_PAD_CTRL	0x038 0x000 ALT7 0x0
+#define VF610_PAD_PTA25__GPIO_15		0x03C 0x000 ALT0 0x0
+#define VF610_PAD_PTA25__TRACED9		0x03C 0x000 ALT1 0x0
+#define VF610_PAD_PTA25__USB1_VBUS_OC		0x03C 0x000 ALT2 0x0
+#define VF610_PAD_PTA25__ESDHC1_CMD		0x03C 0x000 ALT5 0x0
+#define VF610_PAD_PTA25__DCU1_TCON5		0x03C 0x000 ALT6 0x0
+#define VF610_PAD_PTA26__GPIO_16		0x040 0x000 ALT0 0x0
+#define VF610_PAD_PTA26__TRACED10		0x040 0x000 ALT1 0x0
+#define VF610_PAD_PTA26__SAI3_TX_BCLK		0x040 0x000 ALT2 0x0
+#define VF610_PAD_PTA26__ESDHC1_DAT0		0x040 0x000 ALT5 0x0
+#define VF610_PAD_PTA26__DCU1_TCON6		0x040 0x000 ALT6 0x0
+#define VF610_PAD_PTA27__GPIO_17		0x044 0x000 ALT0 0x0
+#define VF610_PAD_PTA27__TRACED11		0x044 0x000 ALT1 0x0
+#define VF610_PAD_PTA27__SAI3_RX_BCLK		0x044 0x000 ALT2 0x0
+#define VF610_PAD_PTA27__ESDHC1_DAT1		0x044 0x000 ALT5 0x0
+#define VF610_PAD_PTA27__DCU1_TCON7		0x044 0x000 ALT6 0x0
+#define VF610_PAD_PTA28__GPIO_18		0x048 0x000 ALT0 0x0
+#define VF610_PAD_PTA28__TRACED12		0x048 0x000 ALT1 0x0
+#define VF610_PAD_PTA28__SAI3_RX_DATA		0x048 0x000 ALT2 0x0
+#define VF610_PAD_PTA28__ENET1_1588_TMR0	0x048 0x000 ALT3 0x0
+#define VF610_PAD_PTA28__UART4_TX		0x048 0x000 ALT4 0x0
+#define VF610_PAD_PTA28__ESDHC1_DATA2		0x048 0x000 ALT5 0x0
+#define VF610_PAD_PTA28__DCU1_TCON8		0x048 0x000 ALT6 0x0
+#define VF610_PAD_PTA29__GPIO_19		0x04C 0x000 ALT0 0x0
+#define VF610_PAD_PTA29__TRACED13		0x04C 0x000 ALT1 0x0
+#define VF610_PAD_PTA29__SAI3_TX_DATA		0x04C 0x000 ALT2 0x0
+#define VF610_PAD_PTA29__ENET1_1588_TMR1	0x04C 0x000 ALT3 0x0
+#define VF610_PAD_PTA29__UART4_RX		0x04C 0x000 ALT4 0x0
+#define VF610_PAD_PTA29__ESDHC1_DAT3		0x04C 0x000 ALT5 0x0
+#define VF610_PAD_PTA29__DCU1_TCON9		0x04C 0x000 ALT6 0x0
+#define VF610_PAD_PTA30__GPIO_20		0x050 0x000 ALT0 0x0
+#define VF610_PAD_PTA30__TRACED14		0x050 0x000 ALT1 0x0
+#define VF610_PAD_PTA30__SAI3_RX_SYNC		0x050 0x000 ALT2 0x0
+#define VF610_PAD_PTA30__ENET1_1588_TMR2	0x050 0x000 ALT3 0x0
+#define VF610_PAD_PTA30__UART4_RTS		0x050 0x000 ALT4 0x0
+#define VF610_PAD_PTA30__I2C3_SCL		0x050 0x000 ALT5 0x0
+#define VF610_PAD_PTA30__UART3_TX		0x050 0x394 ALT7 0x1
+#define VF610_PAD_PTA31__GPIO_21		0x054 0x000 ALT0 0x0
+#define VF610_PAD_PTA31__TRACED15		0x054 0x000 ALT1 0x0
+#define VF610_PAD_PTA31__SAI3_TX_SYNC		0x054 0x000 ALT2 0x0
+#define VF610_PAD_PTA31__ENET1_1588_TMR3	0x054 0x000 ALT3 0x0
+#define VF610_PAD_PTA31__UART4_CTS		0x054 0x000 ALT4 0x0
+#define VF610_PAD_PTA31__I2C3_SDA		0x054 0x000 ALT5 0x0
+#define VF610_PAD_PTA31__UART3_RX		0x054 0x390 ALT7 0x1
+#define VF610_PAD_PTB0__GPIO_22			0x058 0x000 ALT0 0x0
+#define VF610_PAD_PTB0__FTM0_CH0		0x058 0x000 ALT1 0x0
+#define VF610_PAD_PTB0__ADC0_SE2		0x058 0x000 ALT2 0x0
+#define VF610_PAD_PTB0__TRACE_CTL		0x058 0x000 ALT3 0x0
+#define VF610_PAD_PTB0__LCD34			0x058 0x000 ALT4 0x0
+#define VF610_PAD_PTB0__SAI2_RX_BCLK		0x058 0x364 ALT5 0x1
+#define VF610_PAD_PTB0__VIU_DATA18		0x058 0x000 ALT6 0x0
+#define VF610_PAD_PTB0__QSPI1_A_QPCS0		0x058 0x000 ALT7 0x0
+#define VF610_PAD_PTB1__GPIO_23			0x05C 0x000 ALT0 0x0
+#define VF610_PAD_PTB1__FTM0_CH1		0x05C 0x000 ALT1 0x0
+#define VF610_PAD_PTB1__ADC0_SE3		0x05C 0x000 ALT2 0x0
+#define VF610_PAD_PTB1__SRC_RCON30		0x05C 0x000 ALT3 0x0
+#define VF610_PAD_PTB1__LCD35			0x05C 0x000 ALT4 0x0
+#define VF610_PAD_PTB1__SAI2_RX_DATA		0x05C 0x368 ALT5 0x1
+#define VF610_PAD_PTB1__VIU_DATA19		0x05C 0x000 ALT6 0x0
+#define VF610_PAD_PTB1__QSPI1_A_DATA3		0x05C 0x000 ALT7 0x0
+#define VF610_PAD_PTB2__GPIO_24			0x060 0x000 ALT0 0x0
+#define VF610_PAD_PTB2__FTM0_CH2		0x060 0x000 ALT1 0x0
+#define VF610_PAD_PTB2__ADC1_SE2		0x060 0x000 ALT2 0x0
+#define VF610_PAD_PTB2__SRC_RCON31		0x060 0x000 ALT3 0x0
+#define VF610_PAD_PTB2__LCD36			0x060 0x000 ALT4 0x0
+#define VF610_PAD_PTB2__SAI2_RX_SYNC		0x060 0x36C ALT5 0x1
+#define VF610_PAD_PTB2__VIDEO_IN0_DATA20	0x060 0x000 ALT6 0x0
+#define VF610_PAD_PTB2__QSPI1_A_DATA2		0x060 0x000 ALT7 0x0
+#define VF610_PAD_PTB3__GPIO_25			0x064 0x000 ALT0 0x0
+#define VF610_PAD_PTB3__FTM0_CH3		0x064 0x000 ALT1 0x0
+#define VF610_PAD_PTB3__ADC1_SE3		0x064 0x000 ALT2 0x0
+#define VF610_PAD_PTB3__PDB_EXTRIG		0x064 0x000 ALT3 0x0
+#define VF610_PAD_PTB3__LCD37			0x064 0x000 ALT4 0x0
+#define VF610_PAD_PTB3__VIU_DATA21		0x064 0x000 ALT6 0x0
+#define VF610_PAD_PTB3__QSPI1_A_DATA1		0x064 0x000 ALT7 0x0
+#define VF610_PAD_PTB4__GPIO_26			0x068 0x000 ALT0 0x0
+#define VF610_PAD_PTB4__FTM0_CH4		0x068 0x000 ALT1 0x0
+#define VF610_PAD_PTB4__UART1_TX		0x068 0x380 ALT2 0x0
+#define VF610_PAD_PTB4__ADC0_SE4		0x068 0x000 ALT3 0x0
+#define VF610_PAD_PTB4__LCD38			0x068 0x000 ALT4 0x0
+#define VF610_PAD_PTB4__VIU_FID			0x068 0x3A8 ALT5 0x0
+#define VF610_PAD_PTB4__VIU_DATA22		0x068 0x000 ALT6 0x0
+#define VF610_PAD_PTB4__QSPI1_A_DATA0		0x068 0x000 ALT7 0x0
+#define VF610_PAD_PTB5__GPIO_27			0x06C 0x000 ALT0 0x0
+#define VF610_PAD_PTB5__FTM0_CH5		0x06C 0x000 ALT1 0x0
+#define VF610_PAD_PTB5__UART1_RX		0x06C 0x37C ALT2 0x0
+#define VF610_PAD_PTB5__ADC1_SE4		0x06C 0x000 ALT3 0x0
+#define VF610_PAD_PTB5__LCD39			0x06C 0x000 ALT4 0x0
+#define VF610_PAD_PTB5__VIU_DE			0x06C 0x3A4 ALT5 0x0
+#define VF610_PAD_PTB5__QSPI1_A_DQS		0x06C 0x000 ALT7 0x0
+#define VF610_PAD_PTB6__GPIO_28			0x070 0x000 ALT0 0x0
+#define VF610_PAD_PTB6__FTM0_CH6		0x070 0x000 ALT1 0x0
+#define VF610_PAD_PTB6__UART1_RTS		0x070 0x000 ALT2 0x0
+#define VF610_PAD_PTB6__QSPI0_QPCS1_A		0x070 0x000 ALT3 0x0
+#define VF610_PAD_PTB6__LCD_LCD40		0x070 0x000 ALT4 0x0
+#define VF610_PAD_PTB6__FB_CLKOUT		0x070 0x000 ALT5 0x0
+#define VF610_PAD_PTB6__VIU_HSYNC		0x070 0x000 ALT6 0x0
+#define VF610_PAD_PTB6__UART2_TX		0x070 0x38C ALT7 0x0
+#define VF610_PAD_PTB7__GPIO_29			0x074 0x000 ALT0 0x0
+#define VF610_PAD_PTB7__FTM0_CH7		0x074 0x000 ALT1 0x0
+#define VF610_PAD_PTB7__UART1_CTS		0x074 0x378 ALT2 0x0
+#define VF610_PAD_PTB7__QSPI0_B_QPCS1		0x074 0x000 ALT3 0x0
+#define VF610_PAD_PTB7__LCD41			0x074 0x000 ALT4 0x0
+#define VF610_PAD_PTB7__VIU_VSYNC		0x074 0x000 ALT6 0x0
+#define VF610_PAD_PTB7__UART2_RX		0x074 0x388 ALT7 0x0
+#define VF610_PAD_PTB8__GPIO_30			0x078 0x000 ALT0 0x0
+#define VF610_PAD_PTB8__FTM1_CH0		0x078 0x32C ALT1 0x0
+#define VF610_PAD_PTB8__FTM1_QD_PHA		0x078 0x334 ALT3 0x1
+#define VF610_PAD_PTB8__VIU_DE			0x078 0x3A4 ALT5 0x1
+#define VF610_PAD_PTB8__DCU1_R6			0x078 0x000 ALT7 0x0
+#define VF610_PAD_PTB9__GPIO_31			0x07C 0x000 ALT0 0x0
+#define VF610_PAD_PTB9__FTM1_CH1		0x07C 0x330 ALT1 0x0
+#define VF610_PAD_PTB9__FTM1_QD_PHB		0x07C 0x338 ALT3 0x1
+#define VF610_PAD_PTB9__DCU1_R7			0x07C 0x000 ALT7 0x0
+#define VF610_PAD_PTB10__GPIO_32		0x080 0x000 ALT0 0x0
+#define VF610_PAD_PTB10__UART0_TX		0x080 0x000 ALT1 0x0
+#define VF610_PAD_PTB10__DCU0_TCON4		0x080 0x000 ALT4 0x0
+#define VF610_PAD_PTB10__VIU_DE			0x080 0x3A4 ALT5 0x2
+#define VF610_PAD_PTB10__CKO1			0x080 0x000 ALT6 0x0
+#define VF610_PAD_PTB10__ENET_TS_CLKIN		0x080 0x2F4 ALT7 0x1
+#define VF610_PAD_PTB11__GPIO_33		0x084 0x000 ALT0 0x0
+#define VF610_PAD_PTB11__UART0_RX		0x084 0x000 ALT1 0x0
+#define VF610_PAD_PTB11__DCU0_TCON5		0x084 0x000 ALT4 0x0
+#define VF610_PAD_PTB11__SNVS_ALARM_OUT_B	0x084 0x000 ALT5 0x0
+#define VF610_PAD_PTB11__CKO2			0x084 0x000 ALT6 0x0
+#define VF610_PAD_PTB11_ENET0_1588_TMR0		0x084 0x304 ALT7 0x0
+#define VF610_PAD_PTB12__GPIO_34		0x088 0x000 ALT0 0x0
+#define VF610_PAD_PTB12__UART0_RTS		0x088 0x000 ALT1 0x0
+#define VF610_PAD_PTB12__DSPI0_CS5		0x088 0x000 ALT3 0x0
+#define VF610_PAD_PTB12__DCU0_TCON6		0x088 0x000 ALT4 0x0
+#define VF610_PAD_PTB12__FB_AD1			0x088 0x000 ALT5 0x0
+#define VF610_PAD_PTB12__NMI			0x088 0x000 ALT6 0x0
+#define VF610_PAD_PTB12__ENET0_1588_TMR1	0x088 0x308 ALT7 0x0
+#define VF610_PAD_PTB13__GPIO_35		0x08C 0x000 ALT0 0x0
+#define VF610_PAD_PTB13__UART0_CTS		0x08C 0x000 ALT1 0x0
+#define VF610_PAD_PTB13__DSPI0_CS4		0x08C 0x000 ALT3 0x0
+#define VF610_PAD_PTB13__DCU0_TCON7		0x08C 0x000 ALT4 0x0
+#define VF610_PAD_PTB13__FB_AD0			0x08C 0x000 ALT5 0x0
+#define VF610_PAD_PTB13__TRACE_CTL		0x08C 0x000 ALT6 0x0
+#define VF610_PAD_PTB14__GPIO_36		0x090 0x000 ALT0 0x0
+#define VF610_PAD_PTB14__CAN0_RX		0x090 0x000 ALT1 0x0
+#define VF610_PAD_PTB14__I2C0_SCL		0x090 0x33C ALT2 0x1
+#define VF610_PAD_PTB14__DCU0_TCON8		0x090 0x000 ALT4 0x0
+#define VF610_PAD_PTB14__DCU1_PCLK		0x090 0x000 ALT7 0x0
+#define VF610_PAD_PTB15__GPIO_37		0x094 0x000 ALT0 0x0
+#define VF610_PAD_PTB15__CAN0_TX		0x094 0x000 ALT1 0x0
+#define VF610_PAD_PTB15__I2C0_SDA		0x094 0x340 ALT2 0x1
+#define VF610_PAD_PTB15__DCU0_TCON9		0x094 0x000 ALT4 0x0
+#define VF610_PAD_PTB15__VIU_PIX_CLK		0x094 0x3AC ALT7 0x0
+#define VF610_PAD_PTB16__GPIO_38		0x098 0x000 ALT0 0x0
+#define VF610_PAD_PTB16__CAN1_RX		0x098 0x000 ALT1 0x0
+#define VF610_PAD_PTB16__I2C1_SCL		0x098 0x344 ALT2 0x1
+#define VF610_PAD_PTB16__DCU0_TCON10		0x098 0x000 ALT4 0x0
+#define VF610_PAD_PTB17__GPIO_39		0x09C 0x000 ALT0 0x0
+#define VF610_PAD_PTB17__CAN1_TX		0x09C 0x000 ALT1 0x0
+#define VF610_PAD_PTB17__I2C1_SDA		0x09C 0x348 ALT2 0x1
+#define VF610_PAD_PTB17__DCU0_TCON11		0x09C 0x000 ALT4 0x0
+#define VF610_PAD_PTB18__GPIO_40		0x0A0 0x000 ALT0 0x0
+#define VF610_PAD_PTB18__DSPI0_CS1		0x0A0 0x000 ALT1 0x0
+#define VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x0A0 0x2EC ALT2 0x2
+#define VF610_PAD_PTB18__VIU_DATA9		0x0A0 0x000 ALT6 0x0
+#define VF610_PAD_PTB19__GPIO_41		0x0A4 0x000 ALT0 0x0
+#define VF610_PAD_PTB19__DSPI0_CS0		0x0A4 0x000 ALT1 0x0
+#define VF610_PAD_PTB19__VIU_DATA10		0x0A4 0x000 ALT6 0x0
+#define VF610_PAD_PTB20__GPIO_42		0x0A8 0x000 ALT0 0x0
+#define VF610_PAD_PTB20__DSPI0_SIN		0x0A8 0x000 ALT1 0x0
+#define VF610_PAD_PTB20__LCD42			0x0A8 0x000 ALT4 0x0
+#define VF610_PAD_PTB20__VIU_DATA11		0x0A8 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__GPIO_43		0x0AC 0x000 ALT0 0x0
+#define VF610_PAD_PTB21__DSPI0_SOUT		0x0AC 0x000 ALT1 0x0
+#define VF610_PAD_PTB21__LCD43			0x0AC 0x000 ALT4 0x0
+#define VF610_PAD_PTB21__VIU_DATA12		0x0AC 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__DCU1_PCLK		0x0AC 0x000 ALT7 0x0
+#define VF610_PAD_PTB22__GPIO_44		0x0B0 0x000 ALT0 0x0
+#define VF610_PAD_PTB22__DSPI0_SCK		0x0B0 0x000 ALT1 0x0
+#define VF610_PAD_PTB22__VLCD			0x0B0 0x000 ALT4 0x0
+#define VF610_PAD_PTB22__VIU_FID		0x0B0 0x3A8 ALT5 0x1
+#define VF610_PAD_PTC0__GPIO_45			0x0B4 0x000 ALT0 0x0
+#define VF610_PAD_PTC0__ENET_RMII0_MDC		0x0B4 0x000 ALT1 0x0
+#define VF610_PAD_PTC0__FTM1_CH0		0x0B4 0x32C ALT2 0x1
+#define VF610_PAD_PTC0__DSPI0_CS3		0x0B4 0x000 ALT3 0x0
+#define VF610_PAD_PTC0__ESAI_SCKT		0x0B4 0x310 ALT4 0x0
+#define VF610_PAD_PTC0__ESDHC0_CLK		0x0B4 0x000 ALT5 0x0
+#define VF610_PAD_PTC0__VIU_DATA0		0x0B4 0x000 ALT6 0x0
+#define VF610_PAD_PTC0__SRC_RCON18		0x0B4 0x398 ALT7 0x0
+#define VF610_PAD_PTC1__GPIO_46			0x0B8 0x000 ALT0 0x0
+#define VF610_PAD_PTC1__ENET_RMII0_MDIO		0x0B8 0x000 ALT1 0x0
+#define VF610_PAD_PTC1__FTM1_CH1		0x0B8 0x330 ALT2 0x1
+#define VF610_PAD_PTC1__DSPI0_CS2		0x0B8 0x000 ALT3 0x0
+#define VF610_PAD_PTC1__ESAI_FST		0x0B8 0x30C ALT4 0x0
+#define VF610_PAD_PTC1__ESDHC0_CMD		0x0B8 0x000 ALT5 0x0
+#define VF610_PAD_PTC1__VIU_DATA1		0x0B8 0x000 ALT6 0x0
+#define VF610_PAD_PTC1__SRC_RCON19		0x0B8 0x39C ALT7 0x0
+#define VF610_PAD_PTC2__GPIO_47			0x0BC 0x000 ALT0 0x0
+#define VF610_PAD_PTC2__ENET_RMII0_CRS		0x0BC 0x000 ALT1 0x0
+#define VF610_PAD_PTC2__UART1_TX		0x0BC 0x380 ALT2 0x1
+#define VF610_PAD_PTC2__ESAI_SDO0		0x0BC 0x314 ALT4 0x0
+#define VF610_PAD_PTC2__ESDHC0_DAT0		0x0BC 0x000 ALT5 0x0
+#define VF610_PAD_PTC2__VIU_DATA2		0x0BC 0x000 ALT6 0x0
+#define VF610_PAD_PTC2__SRC_RCON20		0x0BC 0x3A0 ALT7 0x0
+#define VF610_PAD_PTC3__GPIO_48			0x0C0 0x000 ALT0 0x0
+#define VF610_PAD_PTC3__ENET_RMII0_RXD1		0x0C0 0x000 ALT1 0x0
+#define VF610_PAD_PTC3__UART1_RX		0x0C0 0x37C ALT2 0x1
+#define VF610_PAD_PTC3__ESAI_SDO1		0x0C0 0x318 ALT4 0x0
+#define VF610_PAD_PTC3__ESDHC0_DAT1		0x0C0 0x000 ALT5 0x0
+#define VF610_PAD_PTC3__VIU_DATA3		0x0C0 0x000 ALT6 0x0
+#define VF610_PAD_PTC3__DCU0_R0			0x0C0 0x000 ALT7 0x0
+#define VF610_PAD_PTC4__GPIO_49			0x0C4 0x000 ALT0 0x0
+#define VF610_PAD_PTC4__ENET_RMII0_RXD0		0x0C4 0x000 ALT1 0x0
+#define VF610_PAD_PTC4__UART1_RTS		0x0C4 0x000 ALT2 0x0
+#define VF610_PAD_PTC4__DSPI1_CS1		0x0C4 0x000 ALT3 0x0
+#define VF610_PAD_PTC4__ESAI_SDO2		0x0C4 0x31C ALT4 0x0
+#define VF610_PAD_PTC4__ESDHC0_DAT2		0x0C4 0x000 ALT5 0x0
+#define VF610_PAD_PTC4__VIU_DATA4		0x0C4 0x000 ALT6 0x0
+#define VF610_PAD_PTC4__DCU0_R1			0x0C4 0x000 ALT7 0x0
+#define VF610_PAD_PTC5__GPIO_50			0x0C8 0x000 ALT0 0x0
+#define VF610_PAD_PTC5__ENET_RMII0_RXER		0x0C8 0x000 ALT1 0x0
+#define VF610_PAD_PTC5__UART1_CTS		0x0C8 0x378 ALT2 0x1
+#define VF610_PAD_PTC5__DSPI1_CS0		0x0C8 0x300 ALT3 0x0
+#define VF610_PAD_PTC5__ESAI_SDO3		0x0C8 0x320 ALT4 0x0
+#define VF610_PAD_PTC5__ESDHC0_DAT3		0x0C8 0x000 ALT5 0x0
+#define VF610_PAD_PTC5__VIU_DATA5		0x0C8 0x000 ALT6 0x0
+#define VF610_PAD_PTC5__DCU0_G0			0x0C8 0x000 ALT7 0x0
+#define VF610_PAD_PTC6__GPIO_51			0x0CC 0x000 ALT0 0x0
+#define VF610_PAD_PTC6__ENET_RMII0_TXD1		0x0CC 0x000 ALT1 0x0
+#define VF610_PAD_PTC6__DSPI1_SIN		0x0CC 0x2FC ALT3 0x0
+#define VF610_PAD_PTC6__ESAI_SDI0		0x0CC 0x328 ALT4 0x0
+#define VF610_PAD_PTC6__ESDHC0_WP		0x0CC 0x000 ALT5 0x0
+#define VF610_PAD_PTC6__VIU_DATA6		0x0CC 0x000 ALT6 0x0
+#define VF610_PAD_PTC6__DCU0_G1			0x0CC 0x000 ALT7 0x0
+#define VF610_PAD_PTC7__GPIO_52			0x0D0 0x000 ALT0 0x0
+#define VF610_PAD_PTC7__ENET_RMII0_TXD0		0x0D0 0x000 ALT1 0x0
+#define VF610_PAD_PTC7__DSPI1_SOUT		0x0D0 0x000 ALT3 0x0
+#define VF610_PAD_PTC7__ESAI_SDI1		0x0D0 0x324 ALT4 0x0
+#define VF610_PAD_PTC7__VIU_DATA7		0x0D0 0x000 ALT6 0x0
+#define VF610_PAD_PTC7__DCU0_B0			0x0D0 0x000 ALT7 0x0
+#define VF610_PAD_PTC8__GPIO_53			0x0D4 0x000 ALT0 0x0
+#define VF610_PAD_PTC8__ENET_RMII0_TXEN		0x0D4 0x000 ALT1 0x0
+#define VF610_PAD_PTC8__DSPI1_SCK		0x0D4 0x2F8 ALT3 0x0
+#define VF610_PAD_PTC8__VIU_DATA8		0x0D4 0x000 ALT6 0x0
+#define VF610_PAD_PTC8__DCU0_B1			0x0D4 0x000 ALT7 0x0
+#define VF610_PAD_PTC9__GPIO_54			0x0D8 0x000 ALT0 0x0
+#define VF610_PAD_PTC9__ENET_RMII1_MDC		0x0D8 0x000 ALT1 0x0
+#define VF610_PAD_PTC9__ESAI_SCKT		0x0D8 0x310 ALT3 0x1
+#define VF610_PAD_PTC9__MLB_CLK			0x0D8 0x354 ALT6 0x1
+#define VF610_PAD_PTC9__DEBUG_OUT0		0x0D8 0x000 ALT7 0x0
+#define VF610_PAD_PTC10__GPIO_55		0x0DC 0x000 ALT0 0x0
+#define VF610_PAD_PTC10__ENET_RMII1_MDIO	0x0DC 0x000 ALT1 0x0
+#define VF610_PAD_PTC10__ESAI_FST		0x0DC 0x30C ALT3 0x1
+#define VF610_PAD_PTC10__MLB_SIGNAL		0x0DC 0x35C ALT6 0x1
+#define VF610_PAD_PTC10__DEBUG_OUT1		0x0DC 0x000 ALT7 0x0
+#define VF610_PAD_PTC11__GPIO_56		0x0E0 0x000 ALT0 0x0
+#define VF610_PAD_PTC11__ENET_RMII1_CRS		0x0E0 0x000 ALT1 0x0
+#define VF610_PAD_PTC11__ESAI_SDO0		0x0E0 0x314 ALT3 0x1
+#define VF610_PAD_PTC11__MLB_DATA		0x0E0 0x358 ALT6 0x1
+#define VF610_PAD_PTC11__DEBUG_OUT		0x0E0 0x000 ALT7 0x0
+#define VF610_PAD_PTC12__GPIO_57		0x0E4 0x000 ALT0 0x0
+#define VF610_PAD_PTC12__ENET_RMII1_RXD1	0x0E4 0x000 ALT1 0x0
+#define VF610_PAD_PTC12__ESAI_SDO1		0x0E4 0x318 ALT3 0x1
+#define VF610_PAD_PTC12__SAI2_TX_BCLK		0x0E4 0x370 ALT5 0x1
+#define VF610_PAD_PTC12__DEBUG_OUT3		0x0E4 0x000 ALT7 0x0
+#define VF610_PAD_PTC13__GPIO_58		0x0E8 0x000 ALT0 0x0
+#define VF610_PAD_PTC13__ENET_RMII1_RXD0	0x0E8 0x000 ALT1 0x0
+#define VF610_PAD_PTC13__ESAI_SDO2		0x0E8 0x31C ALT3 0x1
+#define VF610_PAD_PTC13__SAI2_RX_BCLK		0x0E8 0x364 ALT5 0x2
+#define VF610_PAD_PTC13__DEBUG_OUT4		0x0E8 0x000 ALT7 0x0
+#define VF610_PAD_PTC14__GPIO_59		0x0EC 0x000 ALT0 0x0
+#define VF610_PAD_PTC14__ENET_RMII1_RXER	0x0EC 0x000 ALT1 0x0
+#define VF610_PAD_PTC14__ESAI_SDO3		0x0EC 0x320 ALT3 0x1
+#define VF610_PAD_PTC14__UART5_TX		0x0EC 0x000 ALT4 0x0
+#define VF610_PAD_PTC14__SAI2_RX_DATA		0x0EC 0x368 ALT5 0x2
+#define VF610_PAD_PTC14__ADC0_SE6		0x0EC 0x000 ALT6 0x0
+#define VF610_PAD_PTC14__DEBUG_OUT5		0x0EC 0x000 ALT7 0x0
+#define VF610_PAD_PTC15__GPIO_60		0x0F0 0x000 ALT0 0x0
+#define VF610_PAD_PTC15__ENET_RMII1_TXD1	0x0F0 0x000 ALT1 0x0
+#define VF610_PAD_PTC15__ESAI_SDI0		0x0F0 0x328 ALT3 0x1
+#define VF610_PAD_PTC15__UART5_RX		0x0F0 0x000 ALT4 0x0
+#define VF610_PAD_PTC15__SAI2_TX_DATA		0x0F0 0x000 ALT5 0x0
+#define VF610_PAD_PTC15__ADC0_SE7		0x0F0 0x000 ALT6 0x0
+#define VF610_PAD_PTC15__DEBUG_OUT6		0x0F0 0x000 ALT7 0x0
+#define VF610_PAD_PTC16__GPIO_61		0x0F4 0x000 ALT0 0x0
+#define VF610_PAD_PTC16__ENET_RMII1_TXD0	0x0F4 0x000 ALT1 0x0
+#define VF610_PAD_PTC16__ESAI_SDI1		0x0F4 0x324 ALT3 0x1
+#define VF610_PAD_PTC16__UART5_RTS		0x0F4 0x000 ALT4 0x0
+#define VF610_PAD_PTC16__SAI2_RX_SYNC		0x0F4 0x36C ALT5 0x2
+#define VF610_PAD_PTC16__ADC1_SE6		0x0F4 0x000 ALT6 0x0
+#define VF610_PAD_PTC16__DEBUG_OUT7		0x0F4 0x000 ALT7 0x0
+#define VF610_PAD_PTC17__GPIO_62		0x0F8 0x000 ALT0 0x0
+#define VF610_PAD_PTC17__ENET_RMII1_TXEN	0x0F8 0x000 ALT1 0x0
+#define VF610_PAD_PTC17__ADC1_SE7		0x0F8 0x000 ALT3 0x0
+#define VF610_PAD_PTC17__UART5_CTS		0x0F8 0x000 ALT4 0x0
+#define VF610_PAD_PTC17__SAI2_TX_SYNC		0x0F8 0x374 ALT5 0x1
+#define VF610_PAD_PTC17__USB1_SOF_PULSE		0x0F8 0x000 ALT6 0x0
+#define VF610_PAD_PTC17__DEBUG_OUT8		0x0F8 0x000 ALT7 0x0
+#define VF610_PAD_PTD31__GPIO_63		0x0FC 0x000 ALT0 0x0
+#define VF610_PAD_PTD31__FB_AD31		0x0FC 0x000 ALT1 0x0
+#define VF610_PAD_PTD31__NF_IO15		0x0FC 0x000 ALT2 0x0
+#define VF610_PAD_PTD31__FTM3_CH0		0x0FC 0x000 ALT4 0x0
+#define VF610_PAD_PTD31__DSPI2_CS1		0x0FC 0x000 ALT5 0x0
+#define VF610_PAD_PTD31__DEBUG_OUT9		0x0FC 0x000 ALT7 0x0
+#define VF610_PAD_PTD30__GPIO_64		0x100 0x000 ALT0 0x0
+#define VF610_PAD_PTD30__FB_AD30		0x100 0x000 ALT1 0x0
+#define VF610_PAD_PTD30__NF_IO14		0x100 0x000 ALT2 0x0
+#define VF610_PAD_PTD30__FTM3_CH1		0x100 0x000 ALT4 0x0
+#define VF610_PAD_PTD30__DSPI2_CS0		0x100 0x000 ALT5 0x0
+#define VF610_PAD_PTD30__DEBUG_OUT10		0x100 0x000 ALT7 0x0
+#define VF610_PAD_PTD29__GPIO_65		0x104 0x000 ALT0 0x0
+#define VF610_PAD_PTD29__FB_AD29		0x104 0x000 ALT1 0x0
+#define VF610_PAD_PTD29__NF_IO13		0x104 0x000 ALT2 0x0
+#define VF610_PAD_PTD29__FTM3_CH2		0x104 0x000 ALT4 0x0
+#define VF610_PAD_PTD29__DSPI2_SIN		0x104 0x000 ALT5 0x0
+#define VF610_PAD_PTD29__DEBUG_OUT11		0x104 0x000 ALT7 0x0
+#define VF610_PAD_PTD28__GPIO_66		0x108 0x000 ALT0 0x0
+#define VF610_PAD_PTD28__FB_AD28		0x108 0x000 ALT1 0x0
+#define VF610_PAD_PTD28__NF_IO12		0x108 0x000 ALT2 0x0
+#define VF610_PAD_PTD28__I2C2_SCL		0x108 0x34C ALT3 0x1
+#define VF610_PAD_PTD28__FTM3_CH3		0x108 0x000 ALT4 0x0
+#define VF610_PAD_PTD28__DSPI2_SOUT		0x108 0x000 ALT5 0x0
+#define VF610_PAD_PTD28__DEBUG_OUT12		0x108 0x000 ALT7 0x0
+#define VF610_PAD_PTD27__GPIO_67		0x10C 0x000 ALT0 0x0
+#define VF610_PAD_PTD27__FB_AD27		0x10C 0x000 ALT1 0x0
+#define VF610_PAD_PTD27__NF_IO11		0x10C 0x000 ALT2 0x0
+#define VF610_PAD_PTD27__I2C2_SDA		0x10C 0x350 ALT3 0x1
+#define VF610_PAD_PTD27__FTM3_CH4		0x10C 0x000 ALT4 0x0
+#define VF610_PAD_PTD27__DSPI2_SCK		0x10C 0x000 ALT5 0x0
+#define VF610_PAD_PTD27__DEBUG_OUT13		0x10C 0x000 ALT7 0x0
+#define VF610_PAD_PTD26__GPIO_68		0x110 0x000 ALT0 0x0
+#define VF610_PAD_PTD26__FB_AD26		0x110 0x000 ALT1 0x0
+#define VF610_PAD_PTD26__NF_IO10		0x110 0x000 ALT2 0x0
+#define VF610_PAD_PTD26__FTM3_CH5		0x110 0x000 ALT4 0x0
+#define VF610_PAD_PTD26__ESDHC1_WP		0x110 0x000 ALT5 0x0
+#define VF610_PAD_PTD26__DEBUG_OUT14		0x110 0x000 ALT7 0x0
+#define VF610_PAD_PTD25__GPIO_69		0x114 0x000 ALT0 0x0
+#define VF610_PAD_PTD25__FB_AD25		0x114 0x000 ALT1 0x0
+#define VF610_PAD_PTD25__NF_IO9			0x114 0x000 ALT2 0x0
+#define VF610_PAD_PTD25__FTM3_CH6		0x114 0x000 ALT4 0x0
+#define VF610_PAD_PTD25__DEBUG_OUT15		0x114 0x000 ALT7 0x0
+#define VF610_PAD_PTD24__GPIO_70		0x118 0x000 ALT0 0x0
+#define VF610_PAD_PTD24__FB_AD24		0x118 0x000 ALT1 0x0
+#define VF610_PAD_PTD24__NF_IO8			0x118 0x000 ALT2 0x0
+#define VF610_PAD_PTD24__FTM3_CH7		0x118 0x000 ALT4 0x0
+#define VF610_PAD_PTD24__DEBUG_OUT16		0x118 0x000 ALT7 0x0
+#define VF610_PAD_PTD23__GPIO_71		0x11C 0x000 ALT0 0x0
+#define VF610_PAD_PTD23__FB_AD23		0x11C 0x000 ALT1 0x0
+#define VF610_PAD_PTD23__NF_IO7			0x11C 0x000 ALT2 0x0
+#define VF610_PAD_PTD23__FTM2_CH0		0x11C 0x000 ALT3 0x0
+#define VF610_PAD_PTD23__ENET0_1588_TMR0	0x11C 0x304 ALT4 0x1
+#define VF610_PAD_PTD23__ESDHC0_DAT4		0x11C 0x000 ALT5 0x0
+#define VF610_PAD_PTD23__UART2_TX		0x11C 0x38C ALT6 0x1
+#define VF610_PAD_PTD23__DCU1_R3		0x11C 0x000 ALT7 0x0
+#define VF610_PAD_PTD22__GPIO_72		0x120 0x000 ALT0 0x0
+#define VF610_PAD_PTD22__FB_AD22		0x120 0x000 ALT1 0x0
+#define VF610_PAD_PTD22__NF_IO6			0x120 0x000 ALT2 0x0
+#define VF610_PAD_PTD22__FTM2_CH1		0x120 0x000 ALT3 0x0
+#define VF610_PAD_PTD22__ENET0_1588_TMR1	0x120 0x308 ALT4 0x1
+#define VF610_PAD_PTD22__ESDHC0_DAT5		0x120 0x000 ALT5 0x0
+#define VF610_PAD_PTD22__UART2_RX		0x120 0x388 ALT6 0x1
+#define VF610_PAD_PTD22__DCU1_R4		0x120 0x000 ALT7 0x0
+#define VF610_PAD_PTD21__GPIO_73		0x124 0x000 ALT0 0x0
+#define VF610_PAD_PTD21__FB_AD21		0x124 0x000 ALT1 0x0
+#define VF610_PAD_PTD21__NF_IO5			0x124 0x000 ALT2 0x0
+#define VF610_PAD_PTD21__ENET0_1588_TMR2	0x124 0x000 ALT4 0x0
+#define VF610_PAD_PTD21__ESDHC0_DAT6		0x124 0x000 ALT5 0x0
+#define VF610_PAD_PTD21__UART2_RTS		0x124 0x000 ALT6 0x0
+#define VF610_PAD_PTD21__DCU1_R5		0x124 0x000 ALT7 0x0
+#define VF610_PAD_PTD20__GPIO_74		0x128 0x000 ALT0 0x0
+#define VF610_PAD_PTD20__FB_AD20		0x128 0x000 ALT1 0x0
+#define VF610_PAD_PTD20__NF_IO4			0x128 0x000 ALT2 0x0
+#define VF610_PAD_PTD20__ENET0_1588_TMR3	0x128 0x000 ALT4 0x0
+#define VF610_PAD_PTD20__ESDHC0_DAT7		0x128 0x000 ALT5 0x0
+#define VF610_PAD_PTD20__UART2_CTS		0x128 0x384 ALT6 0x0
+#define VF610_PAD_PTD20__DCU1_R0		0x128 0x000 ALT7 0x0
+#define VF610_PAD_PTD19__GPIO_75		0x12C 0x000 ALT0 0x0
+#define VF610_PAD_PTD19__FB_AD19		0x12C 0x000 ALT1 0x0
+#define VF610_PAD_PTD19__NF_IO3			0x12C 0x000 ALT2 0x0
+#define VF610_PAD_PTD19__ESAI_SCKR		0x12C 0x000 ALT3 0x0
+#define VF610_PAD_PTD19__I2C0_SCL		0x12C 0x33C ALT4 0x2
+#define VF610_PAD_PTD19__FTM2_QD_PHA		0x12C 0x000 ALT5 0x0
+#define VF610_PAD_PTD19__DCU1_R1		0x12C 0x000 ALT7 0x0
+#define VF610_PAD_PTD18__GPIO_76		0x130 0x000 ALT0 0x0
+#define VF610_PAD_PTD18__FB_AD18		0x130 0x000 ALT1 0x0
+#define VF610_PAD_PTD18__NF_IO2			0x130 0x000 ALT2 0x0
+#define VF610_PAD_PTD18__ESAI_FSR		0x130 0x000 ALT3 0x0
+#define VF610_PAD_PTD18__I2C0_SDA		0x130 0x340 ALT4 0x2
+#define VF610_PAD_PTD18__FTM2_QD_PHB		0x130 0x000 ALT5 0x0
+#define VF610_PAD_PTD18__DCU1_G0		0x130 0x000 ALT7 0x0
+#define VF610_PAD_PTD17__GPIO_77		0x134 0x000 ALT0 0x0
+#define VF610_PAD_PTD17__FB_AD17		0x134 0x000 ALT1 0x0
+#define VF610_PAD_PTD17__NF_IO1			0x134 0x000 ALT2 0x0
+#define VF610_PAD_PTD17__ESAI_HCKR		0x134 0x000 ALT3 0x0
+#define VF610_PAD_PTD17__I2C1_SCL		0x134 0x344 ALT4 0x2
+#define VF610_PAD_PTD17__DCU1_G1		0x134 0x000 ALT7 0x0
+#define VF610_PAD_PTD16__GPIO_78		0x138 0x000 ALT0 0x0
+#define VF610_PAD_PTD16__FB_AD16		0x138 0x000 ALT1 0x0
+#define VF610_PAD_PTD16__NF_IO0			0x138 0x000 ALT2 0x0
+#define VF610_PAD_PTD16__ESAI_HCKT		0x138 0x000 ALT3 0x0
+#define VF610_PAD_PTD16__I2C1_SDA		0x138 0x348 ALT4 0x2
+#define VF610_PAD_PTD16__DCU1_G2		0x138 0x000 ALT7 0x0
+#define VF610_PAD_PTD0__GPIO_79			0x13C 0x000 ALT0 0x0
+#define VF610_PAD_PTD0__QSPI0_A_QSCK		0x13C 0x000 ALT1 0x0
+#define VF610_PAD_PTD0__UART2_TX		0x13C 0x38C ALT2 0x2
+#define VF610_PAD_PTD0__FB_AD15			0x13C 0x000 ALT4 0x0
+#define VF610_PAD_PTD0__SPDIF_EXTCLK		0x13C 0x000 ALT5 0x0
+#define VF610_PAD_PTD0__DEBUG_OUT17		0x13C 0x000 ALT7 0x0
+#define VF610_PAD_PTD1__GPIO_80			0x140 0x000 ALT0 0x0
+#define VF610_PAD_PTD1__QSPI0_A_CS0		0x140 0x000 ALT1 0x0
+#define VF610_PAD_PTD1__UART2_RX		0x140 0x388 ALT2 0x2
+#define VF610_PAD_PTD1__FB_AD14			0x140 0x000 ALT4 0x0
+#define VF610_PAD_PTD1__SPDIF_IN1		0x140 0x000 ALT5 0x0
+#define VF610_PAD_PTD1__DEBUG_OUT18		0x140 0x000 ALT7 0x0
+#define VF610_PAD_PTD2__GPIO_81			0x144 0x000 ALT0 0x0
+#define VF610_PAD_PTD2__QSPI0_A_DATA3		0x144 0x000 ALT1 0x0
+#define VF610_PAD_PTD2__UART2_RTS		0x144 0x000 ALT2 0x0
+#define VF610_PAD_PTD2__DSPI1_CS3		0x144 0x000 ALT3 0x0
+#define VF610_PAD_PTD2__FB_AD13			0x144 0x000 ALT4 0x0
+#define VF610_PAD_PTD2__SPDIF_OUT1		0x144 0x000 ALT5 0x0
+#define VF610_PAD_PTD2__DEBUG_OUT19		0x144 0x000 ALT7 0x0
+#define VF610_PAD_PTD3__GPIO_82			0x148 0x000 ALT0 0x0
+#define VF610_PAD_PTD3__QSPI0_A_DATA2		0x148 0x000 ALT1 0x0
+#define VF610_PAD_PTD3__UART2_CTS		0x148 0x384 ALT2 0x1
+#define VF610_PAD_PTD3__DSPI1_CS2		0x148 0x000 ALT3 0x0
+#define VF610_PAD_PTD3__FB_AD12			0x148 0x000 ALT4 0x0
+#define VF610_PAD_PTD3__SPDIF_PLOCK		0x148 0x000 ALT5 0x0
+#define VF610_PAD_PTD3__DEBUG_OUT20		0x148 0x000 ALT7 0x0
+#define VF610_PAD_PTD4__GPIO_83			0x14C 0x000 ALT0 0x0
+#define VF610_PAD_PTD4__QSPI0_A_DATA1		0x14C 0x000 ALT1 0x0
+#define VF610_PAD_PTD4__DSPI1_CS1		0x14C 0x000 ALT3 0x0
+#define VF610_PAD_PTD4__FB_AD11			0x14C 0x000 ALT4 0x0
+#define VF610_PAD_PTD4__SPDIF_SRCLK		0x14C 0x000 ALT5 0x0
+#define VF610_PAD_PTD4__DEBUG_OUT21		0x14C 0x000 ALT7 0x0
+#define VF610_PAD_PTD5__GPIO_84			0x150 0x000 ALT0 0x0
+#define VF610_PAD_PTD5__QSPI0_A_DATA0		0x150 0x000 ALT1 0x0
+#define VF610_PAD_PTD5__DSPI1_CS0		0x150 0x300 ALT3 0x1
+#define VF610_PAD_PTD5__FB_AD10			0x150 0x000 ALT4 0x0
+#define VF610_PAD_PTD5__DEBUG_OUT22		0x150 0x000 ALT7 0x0
+#define VF610_PAD_PTD6__GPIO_85			0x154 0x000 ALT0 0x0
+#define VF610_PAD_PTD6__QSPI1_A_DQS		0x154 0x000 ALT1 0x0
+#define VF610_PAD_PTD6__DSPI1_SIN		0x154 0x2FC ALT3 0x1
+#define VF610_PAD_PTD6__FB_AD9			0x154 0x000 ALT4 0x0
+#define VF610_PAD_PTD6__DEBUG_OUT23		0x154 0x000 ALT7 0x0
+#define VF610_PAD_PTD7__GPIO_86			0x158 0x000 ALT0 0x0
+#define VF610_PAD_PTD7__QSPI0_B_QSCK		0x158 0x000 ALT1 0x0
+#define VF610_PAD_PTD7__DSPI1_SOUT		0x158 0x000 ALT3 0x0
+#define VF610_PAD_PTD7__FB_AD8			0x158 0x000 ALT4 0x0
+#define VF610_PAD_PTD7__DEBUG_OUT24		0x158 0x000 ALT7 0x0
+#define VF610_PAD_PTD8__GPIO_87			0x15C 0x000 ALT0 0x0
+#define VF610_PAD_PTD8__QSPI0_B_CS0		0x15C 0x000 ALT1 0x0
+#define VF610_PAD_PTD8__FB_CLKOUT		0x15C 0x000 ALT2 0x0
+#define VF610_PAD_PTD8__DSPI1_SCK		0x15C 0x2F8 ALT3 0x1
+#define VF610_PAD_PTD8__FB_AD7			0x15C 0x000 ALT4 0x0
+#define VF610_PAD_PTD8__DEBUG_OUT25		0x15C 0x000 ALT7 0x0
+#define VF610_PAD_PTD9__GPIO_88			0x160 0x000 ALT0 0x0
+#define VF610_PAD_PTD9__QSPI0_B_DATA3		0x160 0x000 ALT1 0x0
+#define VF610_PAD_PTD9__DSPI3_CS1		0x160 0x000 ALT2 0x0
+#define VF610_PAD_PTD9__FB_AD6			0x160 0x000 ALT4 0x0
+#define VF610_PAD_PTD9__SAI1_TX_SYNC		0x160 0x360 ALT6 0x0
+#define VF610_PAD_PTD9__DCU1_B0			0x160 0x000 ALT7 0x0
+#define VF610_PAD_PTD10__GPIO_89		0x164 0x000 ALT0 0x0
+#define VF610_PAD_PTD10__QSPI0_B_DATA2		0x164 0x000 ALT1 0x0
+#define VF610_PAD_PTD10__DSPI3_CS0		0x164 0x000 ALT2 0x0
+#define VF610_PAD_PTD10__FB_AD5			0x164 0x000 ALT4 0x0
+#define VF610_PAD_PTD10__DCU1_B1		0x164 0x000 ALT7 0x0
+#define VF610_PAD_PTD11__GPIO_90		0x168 0x000 ALT0 0x0
+#define VF610_PAD_PTD11__QSPI0_B_DATA1		0x168 0x000 ALT1 0x0
+#define VF610_PAD_PTD11__DSPI3_SIN		0x168 0x000 ALT2 0x0
+#define VF610_PAD_PTD11__FB_AD4			0x168 0x000 ALT4 0x0
+#define VF610_PAD_PTD11__DEBUG_OUT26		0x168 0x000 ALT7 0x0
+#define VF610_PAD_PTD12__GPIO_91		0x16C 0x000 ALT0 0x0
+#define VF610_PAD_PTD12__QSPI0_B_DATA0		0x16C 0x000 ALT1 0x0
+#define VF610_PAD_PTD12__DSPI3_SOUT		0x16C 0x000 ALT2 0x0
+#define VF610_PAD_PTD12__FB_AD3			0x16C 0x000 ALT4 0x0
+#define VF610_PAD_PTD12__DEBUG_OUT27		0x16C 0x000 ALT7 0x0
+#define VF610_PAD_PTD13__GPIO_92		0x170 0x000 ALT0 0x0
+#define VF610_PAD_PTD13__QSPI0_B_DQS		0x170 0x000 ALT1 0x0
+#define VF610_PAD_PTD13__DSPI3_SCK		0x170 0x000 ALT2 0x0
+#define VF610_PAD_PTD13__FB_AD2			0x170 0x000 ALT4 0x0
+#define VF610_PAD_PTD13__DEBUG_OUT28		0x170 0x000 ALT7 0x0
+#define VF610_PAD_PTB23__GPIO_93		0x174 0x000 ALT0 0x0
+#define VF610_PAD_PTB23__SAI0_TX_BCLK		0x174 0x000 ALT1 0x0
+#define VF610_PAD_PTB23__UART1_TX		0x174 0x380 ALT2 0x2
+#define VF610_PAD_PTB23__SRC_RCON18		0x174 0x398 ALT3 0x1
+#define VF610_PAD_PTB23__FB_MUXED_ALE		0x174 0x000 ALT4 0x0
+#define VF610_PAD_PTB23__FB_TS_B		0x174 0x000 ALT5 0x0
+#define VF610_PAD_PTB23__UART3_RTS		0x174 0x000 ALT6 0x0
+#define VF610_PAD_PTB23__DCU1_G3		0x174 0x000 ALT7 0x0
+#define VF610_PAD_PTB24__GPIO_94		0x178 0x000 ALT0 0x0
+#define VF610_PAD_PTB24__SAI0_RX_BCLK		0x178 0x000 ALT1 0x0
+#define VF610_PAD_PTB24__UART1_RX		0x178 0x37C ALT2 0x2
+#define VF610_PAD_PTB24__SRC_RCON19		0x178 0x39C ALT3 0x1
+#define VF610_PAD_PTB24__FB_MUXED_TSIZ0		0x178 0x000 ALT4 0x0
+#define VF610_PAD_PTB24__NF_WE_B		0x178 0x000 ALT5 0x0
+#define VF610_PAD_PTB24__UART3_CTS		0x178 0x000 ALT6 0x0
+#define VF610_PAD_PTB24__DCU1_G4		0x178 0x000 ALT7 0x0
+#define VF610_PAD_PTB25__GPIO_95		0x17C 0x000 ALT0 0x0
+#define VF610_PAD_PTB25__SAI0_RX_DATA		0x17C 0x000 ALT1 0x0
+#define VF610_PAD_PTB25__UART1_RTS		0x17C 0x000 ALT2 0x0
+#define VF610_PAD_PTB25__SRC_RCON20		0x17C 0x3A0 ALT3 0x1
+#define VF610_PAD_PTB25__FB_CS1_B		0x17C 0x000 ALT4 0x0
+#define VF610_PAD_PTB25__NF_CE0_B		0x17C 0x000 ALT5 0x0
+#define VF610_PAD_PTB25__DCU1_G5		0x17C 0x000 ALT7 0x0
+#define VF610_PAD_PTB26__GPIO_96		0x180 0x000 ALT0 0x0
+#define VF610_PAD_PTB26__SAI0_TX_DATA		0x180 0x000 ALT1 0x0
+#define VF610_PAD_PTB26__UART1_CTS		0x180 0x378 ALT2 0x2
+#define VF610_PAD_PTB26__SRC_RCON21		0x180 0x000 ALT3 0x0
+#define VF610_PAD_PTB26__FB_CS0_B		0x180 0x000 ALT4 0x0
+#define VF610_PAD_PTB26__NF_CE1_B		0x180 0x000 ALT5 0x0
+#define VF610_PAD_PTB26__DCU1_G6		0x180 0x000 ALT7 0x0
+#define VF610_PAD_PTB27__GPIO_97		0x184 0x000 ALT0 0x0
+#define VF610_PAD_PTB27__SAI0_RX_SYNC		0x184 0x000 ALT1 0x0
+#define VF610_PAD_PTB27__SRC_RCON22		0x184 0x000 ALT3 0x0
+#define VF610_PAD_PTB27__FB_OE_B		0x184 0x000 ALT4 0x0
+#define VF610_PAD_PTB27__FB_MUXED_TBST_B	0x184 0x000 ALT5 0x0
+#define VF610_PAD_PTB27__NF_RE_B		0x184 0x000 ALT6 0x0
+#define VF610_PAD_PTB27__DCU1_G7		0x184 0x000 ALT7 0x0
+#define VF610_PAD_PTB28__GPIO_98		0x188 0x000 ALT0 0x0
+#define VF610_PAD_PTB28__SAI0_TX_SYNC		0x188 0x000 ALT1 0x0
+#define VF610_PAD_PTB28__SRC_RCON23		0x188 0x000 ALT3 0x0
+#define VF610_PAD_PTB28__FB_RW_B		0x188 0x000 ALT4 0x0
+#define VF610_PAD_PTB28__DCU1_B6		0x188 0x000 ALT7 0x0
+#define VF610_PAD_PTC26__GPIO_99		0x18C 0x000 ALT0 0x0
+#define VF610_PAD_PTC26__SAI1_TX_BCLK		0x18C 0x000 ALT1 0x0
+#define VF610_PAD_PTC26__DSPI0_CS5		0x18C 0x000 ALT2 0x0
+#define VF610_PAD_PTC26__SRC_RCON24		0x18C 0x000 ALT3 0x0
+#define VF610_PAD_PTC26__FB_TA_B		0x18C 0x000 ALT4 0x0
+#define VF610_PAD_PTC26__NF_RB_B		0x18C 0x000 ALT5 0x0
+#define VF610_PAD_PTC26__DCU1_B7		0x18C 0x000 ALT7 0x0
+#define VF610_PAD_PTC27__GPIO_100		0x190 0x000 ALT0 0x0
+#define VF610_PAD_PTC27__SAI1_RX_BCLK		0x190 0x000 ALT1 0x0
+#define VF610_PAD_PTC27__DSPI0_CS4		0x190 0x000 ALT2 0x0
+#define VF610_PAD_PTC27__SRC_RCON25		0x190 0x000 ALT3 0x0
+#define VF610_PAD_PTC27__FB_BE3_B		0x190 0x000 ALT4 0x0
+#define VF610_PAD_PTC27__FB_CS3_B		0x190 0x000 ALT5 0x0
+#define VF610_PAD_PTC27__NF_ALE			0x190 0x000 ALT6 0x0
+#define VF610_PAD_PTC27__DCU1_B2		0x190 0x000 ALT7 0x0
+#define VF610_PAD_PTC28__GPIO_101		0x194 0x000 ALT0 0x0
+#define VF610_PAD_PTC28__SAI1_RX_DATA		0x194 0x000 ALT1 0x0
+#define VF610_PAD_PTC28__DSPI0_CS3		0x194 0x000 ALT2 0x0
+#define VF610_PAD_PTC28__SRC_RCON26		0x194 0x000 ALT3 0x0
+#define VF610_PAD_PTC28__FB_BE2_B		0x194 0x000 ALT4 0x0
+#define VF610_PAD_PTC28__FB_CS2_B		0x194 0x000 ALT5 0x0
+#define VF610_PAD_PTC28__NF_CLE			0x194 0x000 ALT6 0x0
+#define VF610_PAD_PTC28__DCU1_B3		0x194 0x000 ALT7 0x0
+#define VF610_PAD_PTC29__GPIO_102		0x198 0x000 ALT0 0x0
+#define VF610_PAD_PTC29__SAI1_TX_DATA		0x198 0x000 ALT1 0x0
+#define VF610_PAD_PTC29__DSPI0_CS2		0x198 0x000 ALT2 0x0
+#define VF610_PAD_PTC29__SRC_RCON27		0x198 0x000 ALT3 0x0
+#define VF610_PAD_PTC29__FB_BE1_B		0x198 0x000 ALT4 0x0
+#define VF610_PAD_PTC29__FB_MUXED_TSIZE1	0x198 0x000 ALT5 0x0
+#define VF610_PAD_PTC29__DCU1_B4		0x198 0x000 ALT7 0x0
+#define VF610_PAD_PTC30__GPIO_103		0x19C 0x000 ALT0 0x0
+#define VF610_PAD_PTC30__SAI1_RX_SYNC		0x19C 0x000 ALT1 0x0
+#define VF610_PAD_PTC30__DSPI1_CS2		0x19C 0x000 ALT2 0x0
+#define VF610_PAD_PTC30__SRC_RCON28		0x19C 0x000 ALT3 0x0
+#define VF610_PAD_PTC30__FB_MUXED_BE0_B		0x19C 0x000 ALT4 0x0
+#define VF610_PAD_PTC30__FB_TSIZ0		0x19C 0x000 ALT5 0x0
+#define VF610_PAD_PTC30__ADC0_SE5		0x19C 0x000 ALT6 0x0
+#define VF610_PAD_PTC30__DCU1_B5		0x19C 0x000 ALT7 0x0
+#define VF610_PAD_PTC31__GPIO_104		0x1A0 0x000 ALT0 0x0
+#define VF610_PAD_PTC31__SAI1_TX_SYNC		0x1A0 0x360 ALT1 0x1
+#define VF610_PAD_PTC31__SRC_RCON29		0x1A0 0x000 ALT3 0x0
+#define VF610_PAD_PTC31__ADC1_SE5		0x1A0 0x000 ALT6 0x0
+#define VF610_PAD_PTC31__DCU1_B6		0x1A0 0x000 ALT7 0x0
+#define VF610_PAD_PTE0__GPIO_105		0x1A4 0x000 ALT0 0x0
+#define VF610_PAD_PTE0__DCU0_HSYNC		0x1A4 0x000 ALT1 0x0
+#define VF610_PAD_PTE0__SRC_BMODE1		0x1A4 0x000 ALT2 0x0
+#define VF610_PAD_PTE0__LCD0			0x1A4 0x000 ALT4 0x0
+#define VF610_PAD_PTE0__DEBUG_OUT29		0x1A4 0x000 ALT7 0x0
+#define VF610_PAD_PTE1__GPIO_106		0x1A8 0x000 ALT0 0x0
+#define VF610_PAD_PTE1__DCU0_VSYNC		0x1A8 0x000 ALT1 0x0
+#define VF610_PAD_PTE1__SRC_BMODE0		0x1A8 0x000 ALT2 0x0
+#define VF610_PAD_PTE1__LCD1			0x1A8 0x000 ALT4 0x0
+#define VF610_PAD_PTE1__DEBUG_OUT30		0x1A8 0x000 ALT7 0x0
+#define VF610_PAD_PTE2__GPIO_107		0x1AC 0x000 ALT0 0x0
+#define VF610_PAD_PTE2__DCU0_PCLK		0x1AC 0x000 ALT1 0x0
+#define VF610_PAD_PTE2__LCD2			0x1AC 0x000 ALT4 0x0
+#define VF610_PAD_PTE2__DEBUG_OUT31		0x1AC 0x000 ALT7 0x0
+#define VF610_PAD_PTE3__GPIO_108		0x1B0 0x000 ALT0 0x0
+#define VF610_PAD_PTE3__DCU0_TAG		0x1B0 0x000 ALT1 0x0
+#define VF610_PAD_PTE3__LCD3			0x1B0 0x000 ALT4 0x0
+#define VF610_PAD_PTE3__DEBUG_OUT32		0x1B0 0x000 ALT7 0x0
+#define VF610_PAD_PTE4__GPIO_109		0x1B4 0x000 ALT0 0x0
+#define VF610_PAD_PTE4__DCU0_DE			0x1B4 0x000 ALT1 0x0
+#define VF610_PAD_PTE4__LCD4			0x1B4 0x000 ALT4 0x0
+#define VF610_PAD_PTE4__DEBUG_OUT33		0x1B4 0x000 ALT7 0x0
+#define VF610_PAD_PTE5__GPIO_110		0x1B8 0x000 ALT0 0x0
+#define VF610_PAD_PTE5__DCU0_R0			0x1B8 0x000 ALT1 0x0
+#define VF610_PAD_PTE5__LCD5			0x1B8 0x000 ALT4 0x0
+#define VF610_PAD_PTE5__DEBUG_OUT34		0x1B8 0x000 ALT7 0x0
+#define VF610_PAD_PTE6__GPIO_111		0x1BC 0x000 ALT0 0x0
+#define VF610_PAD_PTE6__DCU0_R1			0x1BC 0x000 ALT1 0x0
+#define VF610_PAD_PTE6__LCD6			0x1BC 0x000 ALT4 0x0
+#define VF610_PAD_PTE6__DEBUG_OUT35		0x1BC 0x000 ALT7 0x0
+#define VF610_PAD_PTE7__GPIO_112		0x1C0 0x000 ALT0 0x0
+#define VF610_PAD_PTE7__DCU0_R2			0x1C0 0x000 ALT1 0x0
+#define VF610_PAD_PTE7__SRC_RCON0		0x1C0 0x000 ALT3 0x0
+#define VF610_PAD_PTE7__LCD7			0x1C0 0x000 ALT4 0x0
+#define VF610_PAD_PTE7__DEBUG_OUT36		0x1C0 0x000 ALT7 0x0
+#define VF610_PAD_PTE8__GPIO_113		0x1C4 0x000 ALT0 0x0
+#define VF610_PAD_PTE8__DCU0_R3			0x1C4 0x000 ALT1 0x0
+#define VF610_PAD_PTE8__SRC_RCON1		0x1C4 0x000 ALT3 0x0
+#define VF610_PAD_PTE8__LCD8			0x1C4 0x000 ALT4 0x0
+#define VF610_PAD_PTE8__DEBUG_OUT37		0x1C4 0x000 ALT7 0x0
+#define VF610_PAD_PTE9__GPIO_114		0x1C8 0x000 ALT0 0x0
+#define VF610_PAD_PTE9__DCU0_R4			0x1C8 0x000 ALT1 0x0
+#define VF610_PAD_PTE9__SRC_RCON2		0x1C8 0x000 ALT3 0x0
+#define VF610_PAD_PTE9__LCD9			0x1C8 0x000 ALT4 0x0
+#define VF610_PAD_PTE9__DEBUG_OUT38		0x1C8 0x000 ALT7 0x0
+#define VF610_PAD_PTE10__GPIO_115		0x1CC 0x000 ALT0 0x0
+#define VF610_PAD_PTE10__DCU0_R5		0x1CC 0x000 ALT1 0x0
+#define VF610_PAD_PTE10__SRC_RCON3		0x1CC 0x000 ALT3 0x0
+#define VF610_PAD_PTE10__LCD10			0x1CC 0x000 ALT4 0x0
+#define VF610_PAD_PTE10__DEBUG_OUT39		0x1CC 0x000 ALT7 0x0
+#define VF610_PAD_PTE11__GPIO_116		0x1D0 0x000 ALT0 0x0
+#define VF610_PAD_PTE11__DCU0_R6		0x1D0 0x000 ALT1 0x0
+#define VF610_PAD_PTE11__SRC_RCON4		0x1D0 0x000 ALT3 0x0
+#define VF610_PAD_PTE11__LCD11			0x1D0 0x000 ALT4 0x0
+#define VF610_PAD_PTE11__DEBUG_OUT40		0x1D0 0x000 ALT7 0x0
+#define VF610_PAD_PTE12__GPIO_117		0x1D4 0x000 ALT0 0x0
+#define VF610_PAD_PTE12__DCU0_R7		0x1D4 0x000 ALT1 0x0
+#define VF610_PAD_PTE12__DSPI1_CS3		0x1D4 0x000 ALT2 0x0
+#define VF610_PAD_PTE12__SRC_RCON5		0x1D4 0x000 ALT3 0x0
+#define VF610_PAD_PTE12__LCD12			0x1D4 0x000 ALT4 0x0
+#define VF610_PAD_PTE12__LPT_ALT0		0x1D4 0x000 ALT7 0x0
+#define VF610_PAD_PTE13__GPIO_118		0x1D8 0x000 ALT0 0x0
+#define VF610_PAD_PTE13__DCU0_G0		0x1D8 0x000 ALT1 0x0
+#define VF610_PAD_PTE13__LCD13			0x1D8 0x000 ALT4 0x0
+#define VF610_PAD_PTE13__DEBUG_OUT41		0x1D8 0x000 ALT7 0x0
+#define VF610_PAD_PTE14__GPIO_119		0x1DC 0x000 ALT0 0x0
+#define VF610_PAD_PTE14__DCU0_G1		0x1DC 0x000 ALT1 0x0
+#define VF610_PAD_PTE14__LCD14			0x1DC 0x000 ALT4 0x0
+#define VF610_PAD_PTE14__DEBUG_OUT42		0x1DC 0x000 ALT7 0x0
+#define VF610_PAD_PTE15__GPIO_120		0x1E0 0x000 ALT0 0x0
+#define VF610_PAD_PTE15__DCU0_G2		0x1E0 0x000 ALT1 0x0
+#define VF610_PAD_PTE15__SRC_RCON6		0x1E0 0x000 ALT3 0x0
+#define VF610_PAD_PTE15__LCD15			0x1E0 0x000 ALT4 0x0
+#define VF610_PAD_PTE15__DEBUG_OUT43		0x1E0 0x000 ALT7 0x0
+#define VF610_PAD_PTE16__GPIO_121		0x1E4 0x000 ALT0 0x0
+#define VF610_PAD_PTE16__DCU0_G3		0x1E4 0x000 ALT1 0x0
+#define VF610_PAD_PTE16__SRC_RCON7		0x1E4 0x000 ALT3 0x0
+#define VF610_PAD_PTE16__LCD16			0x1E4 0x000 ALT4 0x0
+#define VF610_PAD_PTE17__GPIO_122		0x1E8 0x000 ALT0 0x0
+#define VF610_PAD_PTE17__DCU0_G4		0x1E8 0x000 ALT1 0x0
+#define VF610_PAD_PTE17__SRC_RCON8		0x1E8 0x000 ALT3 0x0
+#define VF610_PAD_PTE17__LCD17			0x1E8 0x000 ALT4 0x0
+#define VF610_PAD_PTE18__GPIO_123		0x1EC 0x000 ALT0 0x0
+#define VF610_PAD_PTE18__DCU0_G5		0x1EC 0x000 ALT1 0x0
+#define VF610_PAD_PTE18__SRC_RCON9		0x1EC 0x000 ALT3 0x0
+#define VF610_PAD_PTE18__LCD18			0x1EC 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__GPIO_124		0x1F0 0x000 ALT0 0x0
+#define VF610_PAD_PTE19__DCU0_G6		0x1F0 0x000 ALT1 0x0
+#define VF610_PAD_PTE19__SRC_RCON10		0x1F0 0x000 ALT3 0x0
+#define VF610_PAD_PTE19__LCD19			0x1F0 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__I2C0_SCL		0x1F0 0x33C ALT5 0x3
+#define VF610_PAD_PTE20__GPIO_125		0x1F4 0x000 ALT0 0x0
+#define VF610_PAD_PTE20__DCU0_G7		0x1F4 0x000 ALT1 0x0
+#define VF610_PAD_PTE20__SRC_RCON11		0x1F4 0x000 ALT3 0x0
+#define VF610_PAD_PTE20__LCD20			0x1F4 0x000 ALT4 0x0
+#define VF610_PAD_PTE20__I2C0_SDA		0x1F4 0x340 ALT5 0x3
+#define VF610_PAD_PTE20__EWM_IN			0x1F4 0x000 ALT7 0x0
+#define VF610_PAD_PTE21__GPIO_126		0x1F8 0x000 ALT0 0x0
+#define VF610_PAD_PTE21__DCU0_B0		0x1F8 0x000 ALT1 0x0
+#define VF610_PAD_PTE21__LCD21			0x1F8 0x000 ALT4 0x0
+#define VF610_PAD_PTE22__GPIO_127		0x1FC 0x000 ALT0 0x0
+#define VF610_PAD_PTE22__DCU0_B1		0x1FC 0x000 ALT1 0x0
+#define VF610_PAD_PTE22__LCD22			0x1FC 0x000 ALT4 0x0
+#define VF610_PAD_PTE23__GPIO_128		0x200 0x000 ALT0 0x0
+#define VF610_PAD_PTE23__DCU0_B2		0x200 0x000 ALT1 0x0
+#define VF610_PAD_PTE23__SRC_RCON12		0x200 0x000 ALT3 0x0
+#define VF610_PAD_PTE23__LCD23			0x200 0x000 ALT4 0x0
+#define VF610_PAD_PTE24__GPIO_129		0x204 0x000 ALT0 0x0
+#define VF610_PAD_PTE24__DCU0_B3		0x204 0x000 ALT1 0x0
+#define VF610_PAD_PTE24__SRC_RCON13		0x204 0x000 ALT3 0x0
+#define VF610_PAD_PTE24__LCD24			0x204 0x000 ALT4 0x0
+#define VF610_PAD_PTE25__GPIO_130		0x208 0x000 ALT0 0x0
+#define VF610_PAD_PTE25__DCU0_B4		0x208 0x000 ALT1 0x0
+#define VF610_PAD_PTE25__SRC_RCON14		0x208 0x000 ALT3 0x0
+#define VF610_PAD_PTE25__LCD25			0x208 0x000 ALT4 0x0
+#define VF610_PAD_PTE26__GPIO_131		0x20C 0x000 ALT0 0x0
+#define VF610_PAD_PTE26__DCU0_B5		0x20C 0x000 ALT1 0x0
+#define VF610_PAD_PTE26__SRC_RCON15		0x20C 0x000 ALT3 0x0
+#define VF610_PAD_PTE26__LCD26			0x20C 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__GPIO_132		0x210 0x000 ALT0 0x0
+#define VF610_PAD_PTE27__DCU0_B6		0x210 0x000 ALT1 0x0
+#define VF610_PAD_PTE27__SRC_RCON16		0x210 0x000 ALT3 0x0
+#define VF610_PAD_PTE27__LCD27			0x210 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__I2C1_SCL		0x210 0x344 ALT5 0x3
+#define VF610_PAD_PTE28__GPIO_133		0x214 0x000 ALT0 0x0
+#define VF610_PAD_PTE28__DCU0_B7		0x214 0x000 ALT1 0x0
+#define VF610_PAD_PTE28__SRC_RCON17		0x214 0x000 ALT3 0x0
+#define VF610_PAD_PTE28__LCD28			0x214 0x000 ALT4 0x0
+#define VF610_PAD_PTE28__I2C1_SDA		0x214 0x348 ALT5 0x3
+#define VF610_PAD_PTE28__EWM_OUT		0x214 0x000 ALT7 0x0
+#define VF610_PAD_PTA7__GPIO_134		0x218 0x000 ALT0 0x0
+#define VF610_PAD_PTA7__VIU_PIX_CLK		0x218 0x3AC ALT1 0x1
+#define VF610_PAD_DDR_RESETB			0x21c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A15__DDR_A_15		0x220 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A14__DDR_A_14		0x224 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A13__DDR_A_13		0x228 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A12__DDR_A_12		0x22c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A11__DDR_A_11		0x230 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A10__DDR_A_10		0x234 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A9__DDR_A_9		0x238 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A8__DDR_A_8		0x23c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A7__DDR_A_7		0x240 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A6__DDR_A_6		0x244 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A5__DDR_A_5		0x248 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A4__DDR_A_4		0x24c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A3__DDR_A_3		0x250 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A2__DDR_A_2		0x254 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A1__DDR_A_1		0x258 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A0__DDR_A_0		0x25c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA2__DDR_BA_2		0x260 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA1__DDR_BA_1		0x264 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA0__DDR_BA_0		0x268 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CAS__DDR_CAS_B		0x26c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CKE__DDR_CKE_0		0x270 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CLK__DDR_CLK_0		0x274 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CS__DDR_CS_B_0		0x278 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D15__DDR_D_15		0x27c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D14__DDR_D_14		0x280 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D13__DDR_D_13		0x284 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D12__DDR_D_12		0x288 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D11__DDR_D_11		0x28c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D10__DDR_D_10		0x290 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D9__DDR_D_9		0x294 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D8__DDR_D_8		0x298 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D7__DDR_D_7		0x29c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D6__DDR_D_6		0x2a0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D5__DDR_D_5		0x2a4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D4__DDR_D_4		0x2a8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D3__DDR_D_3		0x2ac 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D2__DDR_D_2		0x2b0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D1__DDR_D_1		0x2b4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D0__DDR_D_0		0x2b8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM1__DDR_DQM_1		0x2bc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM0__DDR_DQM_0		0x2c0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS1__DDR_DQS_1		0x2c4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS0__DDR_DQS_0		0x2c8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_RAS__DDR_RAS_B		0x2cc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_WE__DDR_WE_B		0x2d0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT1__DDR_ODT_0		0x2d4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT0__DDR_ODT_1		0x2d8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1	0x2dc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2	0x2e0 0x000 ALT0 0x0
+
+#endif
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-twr.dts b/arch/arm/boot/dts/nxp/vf/vf610-twr.dts
new file mode 100644
index 0000000000000..6c246d5aa0328
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-twr.dts
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "VF610 Tower Board";
+	compatible = "fsl,vf610-twr", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	audio_ext: mclk_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	enet_ext: eth_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vcc_3v3_mcu: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vcc_3v3_mcu";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
+	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+			  <&clks VF610_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>,
+				 <&clks VF610_CLK_ENET_EXT>;
+};
+
+&dspi0 {
+	bus-num = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0>;
+	status = "okay";
+
+	sflash: at26df081a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at26df081a";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec0 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+	       #sound-dai-cells = <0>;
+	       compatible = "fsl,sgtl5000";
+	       reg = <0x0a>;
+	       VDDA-supply = <&reg_3p3v>;
+	       VDDIO-supply = <&reg_3p3v>;
+	       clocks = <&clks VF610_CLK_SAI2>;
+	};
+};
+
+&iomuxc {
+	vf610-twr {
+		pinctrl_adc0_ad5: adc0ad5grp {
+			fsl,pins = <
+				VF610_PAD_PTC30__ADC0_SE5		0xa1
+			>;
+		};
+
+		pinctrl_dspi0: dspi0grp {
+			fsl,pins = <
+				VF610_PAD_PTB19__DSPI0_CS0		0x1182
+				VF610_PAD_PTB20__DSPI0_SIN		0x1181
+				VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+				VF610_PAD_PTB22__DSPI0_SCK		0x1182
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTA7__GPIO_134	0x219d
+			>;
+		};
+
+		pinctrl_fec0: fec0grp {
+			fsl,pins = <
+				VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+				VF610_PAD_PTC0__ENET_RMII0_MDC		0x30d3
+				VF610_PAD_PTC1__ENET_RMII0_MDIO		0x30d1
+				VF610_PAD_PTC2__ENET_RMII0_CRS		0x30d1
+				VF610_PAD_PTC3__ENET_RMII0_RXD1		0x30d1
+				VF610_PAD_PTC4__ENET_RMII0_RXD0		0x30d1
+				VF610_PAD_PTC5__ENET_RMII0_RXER		0x30d1
+				VF610_PAD_PTC6__ENET_RMII0_TXD1		0x30d2
+				VF610_PAD_PTC7__ENET_RMII0_TXD0		0x30d2
+				VF610_PAD_PTC8__ENET_RMII0_TXEN		0x30d2
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_i2c0: i2c0grp {
+			fsl,pins = <
+				VF610_PAD_PTB14__I2C0_SCL		0x30d3
+				VF610_PAD_PTB15__I2C0_SDA		0x30d3
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				VF610_PAD_PTD31__NF_IO15	0x28df
+				VF610_PAD_PTD30__NF_IO14	0x28df
+				VF610_PAD_PTD29__NF_IO13	0x28df
+				VF610_PAD_PTD28__NF_IO12	0x28df
+				VF610_PAD_PTD27__NF_IO11	0x28df
+				VF610_PAD_PTD26__NF_IO10	0x28df
+				VF610_PAD_PTD25__NF_IO9		0x28df
+				VF610_PAD_PTD24__NF_IO8		0x28df
+				VF610_PAD_PTD23__NF_IO7		0x28df
+				VF610_PAD_PTD22__NF_IO6		0x28df
+				VF610_PAD_PTD21__NF_IO5		0x28df
+				VF610_PAD_PTD20__NF_IO4		0x28df
+				VF610_PAD_PTD19__NF_IO3		0x28df
+				VF610_PAD_PTD18__NF_IO2		0x28df
+				VF610_PAD_PTD17__NF_IO1		0x28df
+				VF610_PAD_PTD16__NF_IO0		0x28df
+				VF610_PAD_PTB24__NF_WE_B	0x28c2
+				VF610_PAD_PTB25__NF_CE0_B	0x28c2
+				VF610_PAD_PTB27__NF_RE_B	0x28c2
+				VF610_PAD_PTC26__NF_RB_B	0x283d
+				VF610_PAD_PTC27__NF_ALE		0x28c2
+				VF610_PAD_PTC28__NF_CLE		0x28c2
+			>;
+		};
+
+		pinctrl_pwm0: pwm0grp {
+			fsl,pins = <
+				VF610_PAD_PTB0__FTM0_CH0		0x1582
+				VF610_PAD_PTB1__FTM0_CH1		0x1582
+				VF610_PAD_PTB2__FTM0_CH2		0x1582
+				VF610_PAD_PTB3__FTM0_CH3		0x1582
+			>;
+		};
+
+		pinctrl_sai2: sai2grp {
+			fsl,pins = <
+				VF610_PAD_PTA16__SAI2_TX_BCLK		0x02ed
+				VF610_PAD_PTA18__SAI2_TX_DATA		0x02ee
+				VF610_PAD_PTA19__SAI2_TX_SYNC		0x02ed
+				VF610_PAD_PTA21__SAI2_RX_BCLK		0x02ed
+				VF610_PAD_PTA22__SAI2_RX_DATA		0x02ed
+				VF610_PAD_PTA23__SAI2_RX_SYNC		0x02ed
+				VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x02ed
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				VF610_PAD_PTB6__UART2_TX		0x21a2
+				VF610_PAD_PTB7__UART2_RX		0x21a1
+			>;
+		};
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <16>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+	status = "okay";
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
new file mode 100644
index 0000000000000..1a19aec8957b7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 CFU1 Board";
+	compatible = "zii,vf610cfu1", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-fail {
+			label = "zii:red:fail";
+			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-status {
+			label = "zii:green:status";
+			gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-debug-a {
+			label = "zii:green:debug_a";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-debug-b {
+			label = "zii:green:debug_b";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		 compatible = "regulator-fixed";
+		 regulator-name = "vcc_3v3_mcu";
+		 regulator-min-microvolt = <3300000>;
+		 regulator-max-microvolt = <3300000>;
+	};
+
+	sff: sfp {
+		compatible = "sff,sff";
+		pinctrl-0 = <&pinctrl_optical>;
+		pinctrl-names = "default";
+		i2c-bus = <&i2c0>;
+		los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 28VDC_IN */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	/*
+	 * Some CFU1s come with SPI-NOR chip DNPed, so we leave this
+	 * node disabled by default and rely on bootloader to enable
+	 * it when appropriate.
+	 */
+	status = "disabled";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-0";
+			reg = <0x0 0x01000000>;
+		};
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-sdio;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+
+		switch0: switch0@0 {
+			compatible = "marvell,mv88e6085";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+			reg = <0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_1000_2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "eth_cu_1000_3";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "eth_fc_1000_1";
+					phy-mode = "1000base-x";
+					managed = "in-band-status";
+					sfp = <&sff>;
+				};
+
+				port@6 {
+					reg = <6>;
+					phy-mode = "rmii";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	io-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+		label = "nvm";
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c04";
+		reg = <0x54>;
+		label = "nameplate";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+};
+
+&snvsrtc {
+	status = "disabled";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30fe
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			VF610_PAD_PTD3__GPIO_82			0x31c2
+			VF610_PAD_PTE3__GPIO_108		0x31c2
+			VF610_PAD_PTE4__GPIO_109		0x31c2
+			VF610_PAD_PTE5__GPIO_110		0x31c2
+			VF610_PAD_PTE6__GPIO_111		0x31c2
+		>;
+	};
+
+	pinctrl_optical: optical-grp {
+		fsl,pins = <
+		/* SFF SD input */
+		VF610_PAD_PTE27__GPIO_132	0x3061
+
+		/* SFF Transmit disable output */
+		VF610_PAD_PTE13__GPIO_118	0x3043
+		>;
+	};
+
+	pinctrl_switch: switch-grp {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98		0x3061
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
new file mode 100644
index 0000000000000..16b4e06c4efad
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610-zii-dev.dtsi"
+
+/ {
+	model = "ZII VF610 Development Board, Rev B";
+	compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610";
+
+	mdio-mux {
+		compatible = "mdio-mux-gpio";
+		pinctrl-0 = <&pinctrl_mdio_mux>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8  GPIO_ACTIVE_HIGH
+			 &gpio0 9  GPIO_ACTIVE_HIGH
+			 &gpio0 24 GPIO_ACTIVE_HIGH
+			 &gpio0 25 GPIO_ACTIVE_HIGH>;
+		mdio-parent-bus = <&mdio1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio_mux_1: mdio@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0: switch@0 {
+				compatible = "marvell,mv88e6085";
+				pinctrl-0 = <&pinctrl_gpio_switch0>;
+				pinctrl-names = "default";
+				reg = <0>;
+				dsa,member = <0 0>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				eeprom-length = <512>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "lan0";
+						phy-handle = <&switch0phy0>;
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan1";
+						phy-handle = <&switch0phy1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan2";
+						phy-handle = <&switch0phy2>;
+					};
+
+					switch0port5: port@5 {
+						reg = <5>;
+						label = "dsa";
+						phy-mode = "rgmii-txid";
+						link = <&switch1port6
+							&switch2port9>;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						phy-mode = "rmii";
+						ethernet = <&fec1>;
+
+						fixed-link {
+							speed = <100>;
+							full-duplex;
+						};
+					};
+				};
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					switch0phy0: switch0phy0@0 {
+						reg = <0>;
+						interrupt-parent = <&switch0>;
+						interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+					};
+					switch0phy1: switch1phy0@1 {
+						reg = <1>;
+						interrupt-parent = <&switch0>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+					switch0phy2: switch1phy0@2 {
+						reg = <2>;
+						interrupt-parent = <&switch0>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_2: mdio@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1: switch@0 {
+				compatible = "marvell,mv88e6085";
+				pinctrl-0 = <&pinctrl_gpio_switch1>;
+				pinctrl-names = "default";
+				reg = <0>;
+				dsa,member = <0 1>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				eeprom-length = <512>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "lan3";
+						phy-handle = <&switch1phy0>;
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan4";
+						phy-handle = <&switch1phy1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan5";
+						phy-handle = <&switch1phy2>;
+					};
+
+					switch1port5: port@5 {
+						reg = <5>;
+						label = "dsa";
+						link = <&switch2port9>;
+						phy-mode = "1000base-x";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					switch1port6: port@6 {
+						reg = <6>;
+						label = "dsa";
+						phy-mode = "rgmii-txid";
+						link = <&switch0port5>;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch1phy0: switch1phy0@0 {
+						reg = <0>;
+						interrupt-parent = <&switch1>;
+						interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy1: switch1phy0@1 {
+						reg = <1>;
+						interrupt-parent = <&switch1>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy2: switch1phy0@2 {
+						reg = <2>;
+						interrupt-parent = <&switch1>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_4: mdio@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			switch2: switch@0 {
+				compatible = "marvell,mv88e6085";
+				reg = <0>;
+				dsa,member = <0 2>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "lan6";
+						phy-handle = <&switch2phy0>;
+						phy-mode = "sgmii";
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan7";
+						phy-handle = <&switch2phy1>;
+						phy-mode = "sgmii";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan8";
+						phy-handle = <&switch2phy2>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "optical3";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+							link-gpios = <&gpio6 2
+							      GPIO_ACTIVE_HIGH>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "optical4";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+							link-gpios = <&gpio6 3
+							      GPIO_ACTIVE_HIGH>;
+						};
+					};
+
+					switch2port9: port@9 {
+						reg = <9>;
+						label = "dsa";
+						phy-mode = "1000base-x";
+						link = <&switch1port5
+							&switch0port5>;
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch2phy0: phy@0 {
+						reg = <0>;
+					};
+					switch2phy1: phy@1 {
+						reg = <1>;
+					};
+					switch2phy2: phy@2 {
+						reg = <2>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_8: mdio@8 {
+			reg = <8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	spi-0 {
+		compatible = "spi-gpio";
+		pinctrl-0 = <&pinctrl_gpio_spi0>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sck-gpios  = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		cs-gpios  = <&gpio1  9 GPIO_ACTIVE_LOW
+			     &gpio1  8 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <2>;
+
+		flash@0 {
+			compatible = "m25p128", "jedec,spi-nor";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0>;
+			spi-max-frequency = <1000000>;
+		};
+
+		at93c46d@1 {
+			compatible = "atmel,at93c46d";
+			pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>;
+			pinctrl-names = "default";
+			reg = <1>;
+			spi-max-frequency = <500000>;
+			spi-cs-high;
+			data-size = <16>;
+			select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c0 {
+	gpio5: io-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+	};
+
+	gpio6: io-expander@22 {
+		compatible = "nxp,pca9554";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9554_22>;
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			sfp1: eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			sfp2: eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			sfp3: eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			sfp4: eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+	};
+};
+
+&mdio1 {
+	clock-frequency = <5000000>;
+};
+
+&iomuxc {
+	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
+		fsl,pins = <
+			VF610_PAD_PTE27__GPIO_132	0x33e2
+		>;
+	};
+
+	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+		fsl,pins = <
+			VF610_PAD_PTB22__GPIO_44	0x33e2
+			VF610_PAD_PTB21__GPIO_43	0x33e2
+			VF610_PAD_PTB20__GPIO_42	0x33e1
+			VF610_PAD_PTB19__GPIO_41	0x33e2
+			VF610_PAD_PTB18__GPIO_40	0x33e2
+		>;
+	};
+
+	pinctrl_mdio_mux: pinctrl-mdio-mux {
+		fsl,pins = <
+			VF610_PAD_PTA18__GPIO_8		0x31c2
+			VF610_PAD_PTA19__GPIO_9		0x31c2
+			VF610_PAD_PTB2__GPIO_24		0x31c2
+			VF610_PAD_PTB3__GPIO_25		0x31c2
+		>;
+	};
+
+	pinctrl_pca9554_22: pinctrl-pca95540-22 {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98	0x219d
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts
new file mode 100644
index 0000000000000..6f9878f124c44
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610-zii-dev.dtsi"
+
+/ {
+	model = "ZII VF610 Development Board, Rev C";
+	compatible = "zii,vf610dev-c", "zii,vf610dev", "fsl,vf610";
+
+	mdio-mux {
+		compatible = "mdio-mux-gpio";
+		pinctrl-0 = <&pinctrl_mdio_mux>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8  GPIO_ACTIVE_HIGH
+			 &gpio0 9  GPIO_ACTIVE_HIGH
+			 &gpio0 25 GPIO_ACTIVE_HIGH>;
+		mdio-parent-bus = <&mdio1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio_mux_1: mdio@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0: switch@0 {
+				compatible = "marvell,mv88e6190";
+				pinctrl-0 = <&pinctrl_gpio_switch0>;
+				pinctrl-names = "default";
+				reg = <0>;
+				dsa,member = <0 0>;
+				eeprom-length = <65536>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						phy-mode = "rmii";
+						ethernet = <&fec1>;
+
+						fixed-link {
+							speed = <100>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan1";
+						phy-handle = <&switch0phy1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan2";
+						phy-handle = <&switch0phy2>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan3";
+						phy-handle = <&switch0phy3>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan4";
+						phy-handle = <&switch0phy4>;
+					};
+
+					switch0port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "xaui";
+						link = <&switch1port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
+					};
+				};
+
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch0phy1: switch0phy@1 {
+						reg = <1>;
+						interrupt-parent = <&switch0>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy2: switch0phy@2 {
+						reg = <2>;
+						interrupt-parent = <&switch0>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy3: switch0phy@3 {
+						reg = <3>;
+						interrupt-parent = <&switch0>;
+						interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy4: switch0phy@4 {
+						reg = <4>;
+						interrupt-parent = <&switch0>;
+						interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_2: mdio@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1: switch@0 {
+				compatible = "marvell,mv88e6190";
+				pinctrl-0 = <&pinctrl_gpio_switch1>;
+				pinctrl-names = "default";
+				reg = <0>;
+				dsa,member = <0 1>;
+				eeprom-length = <65536>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@1 {
+						reg = <1>;
+						label = "lan5";
+						phy-handle = <&switch1phy1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan6";
+						phy-handle = <&switch1phy2>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan7";
+						phy-handle = <&switch1phy3>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan8";
+						phy-handle = <&switch1phy4>;
+					};
+
+					port@9 {
+						reg = <9>;
+						label = "sff2";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff2>;
+					};
+
+					switch1port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "xaui";
+						link = <&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
+					};
+				};
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch1phy1: switch1phy@1 {
+						reg = <1>;
+						interrupt-parent = <&switch1>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy2: switch1phy@2 {
+						reg = <2>;
+						interrupt-parent = <&switch1>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy3: switch1phy@3 {
+						reg = <3>;
+						interrupt-parent = <&switch1>;
+						interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy4: switch1phy@4 {
+						reg = <4>;
+						interrupt-parent = <&switch1>;
+						interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_4: mdio@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	sff2: sff2 {
+		/* lower */
+		compatible = "sff,sff";
+		i2c-bus = <&sff2_i2c>;
+		los-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff3: sff3 {
+		/* upper */
+		compatible = "sff,sff";
+		i2c-bus = <&sff3_i2c>;
+		los-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0>;
+	status = "okay";
+	spi-num-chipselects = <2>;
+
+	flash@0 {
+		compatible = "m25p128", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+
+	atzb-rf-233@1 {
+		compatible = "atmel,at86rf233";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctr_atzb_rf_233>;
+
+		spi-max-frequency = <7500000>;
+		reg = <1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio3>;
+		xtal-trim = /bits/ 8 <0x06>;
+
+		sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+		reset-gpio = <&gpio6 10 GPIO_ACTIVE_LOW>;
+
+		fsl,spi-cs-sck-delay = <180>;
+		fsl,spi-sck-cs-delay = <250>;
+	};
+};
+
+&i2c0 {
+	/*
+	 * U712
+	 *
+	 * Exposed signals:
+	 *    P1 - WE2_CMD
+	 *    P2 - WE2_CLK
+	 */
+	gpio5: io-expander@18 {
+		compatible = "nxp,pca9557";
+		reg = <0x18>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	/*
+	 * U121
+	 *
+	 * Exposed signals:
+	 *    I/O0  - ENET_SWR_EN
+	 *    I/O1  - ESW1_RESETn
+	 *    I/O2  - ARINC_RESET
+	 *    I/O3  - DD1_IO_RESET
+	 *    I/O4  - ESW2_RESETn
+	 *    I/O5  - ESW3_RESETn
+	 *    I/O6  - ESW4_RESETn
+	 *    I/O8  - TP909
+	 *    I/O9  - FEM_SEL
+	 *    I/O10 - WIFI_RESETn
+	 *    I/O11 - PHY_RSTn
+	 *    I/O12 - OPT1_SD
+	 *    I/O13 - OPT2_SD
+	 *    I/O14 - OPT1_TX_DIS
+	 *    I/O15 - OPT2_TX_DIS
+	 */
+	gpio6: sx1503@20 {
+		compatible = "semtech,sx1503q";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sx1503_20>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	/*
+	 * U715
+	 *
+	 * Exposed signals:
+	 *     IO0 - WE1_CLK
+	 *     IO1 - WE1_CMD
+	 */
+	gpio7: io-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+	};
+};
+
+&i2c1 {
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		read-only;
+	};
+};
+
+&i2c2 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		sff2_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		sff3_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&gpio0 {
+	eth0_intrp {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "sx1503-irq";
+	};
+};
+
+&gpio3 {
+	eth0_intrp {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "eth0-intrp";
+	};
+};
+
+&fec0 {
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec0_phy_int>;
+
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			reg = <0>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctr_atzb_rf_233: pinctrl-atzb-rf-233 {
+		fsl,pins = <
+			VF610_PAD_PTB2__GPIO_24		0x31c2
+			VF610_PAD_PTE27__GPIO_132	0x33e2
+		>;
+	};
+
+
+	pinctrl_sx1503_20: pinctrl-sx1503-20 {
+		fsl,pins = <
+			VF610_PAD_PTB1__GPIO_23		0x219d
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			VF610_PAD_PTA20__UART3_TX	0x21a2
+			VF610_PAD_PTA21__UART3_RX	0x21a1
+		>;
+	};
+
+	pinctrl_mdio_mux: pinctrl-mdio-mux {
+		fsl,pins = <
+			VF610_PAD_PTA18__GPIO_8		0x31c2
+			VF610_PAD_PTA19__GPIO_9		0x31c2
+			VF610_PAD_PTB3__GPIO_25		0x31c2
+		>;
+	};
+
+	pinctrl_fec0_phy_int: pinctrl-fec0-phy-int {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98	0x219d
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
new file mode 100644
index 0000000000000..ce5e52896b19d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
@@ -0,0 +1,450 @@
+/*
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "vf610.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_usb_vbus>;
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 6 0>;
+	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* VCC_1V5 */
+			      <&adc0 9>, /* VCC_1V8 */
+			      <&adc1 8>, /* VCC_1V0 */
+			      <&adc1 9>; /* VCC_1V2 */
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec0>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		   speed = <100>;
+		   full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+
+	ds1682@6b {
+		compatible = "dallas,ds1682";
+		reg = <0x6b>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi0>;
+	status = "okay";
+
+	/*
+	 * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR
+	 * modes, so, spi-max-frequency is limited to 90MHz
+	 */
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <90000000>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+		m25p,fast-read;
+	};
+
+	flash@2 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <90000000>;
+		spi-rx-bus-width = <4>;
+		reg = <2>;
+		m25p,fast-read;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbdev0 {
+	disable-over-current;
+	vbus-supply = <&usb0_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&tempsensor {
+	io-channels = <&adc0 16>;
+};
+
+&iomuxc {
+	pinctrl_adc0_ad5: adc0ad5grp {
+		fsl,pins = <
+			VF610_PAD_PTC30__ADC0_SE5	0x00a1
+		>;
+	};
+
+	pinctrl_dspi0: dspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTB18__DSPI0_CS1	0x1182
+			VF610_PAD_PTB19__DSPI0_CS0	0x1182
+			VF610_PAD_PTB20__DSPI0_SIN	0x1181
+			VF610_PAD_PTB21__DSPI0_SOUT	0x1182
+			VF610_PAD_PTB22__DSPI0_SCK	0x1182
+		>;
+	};
+
+	pinctrl_dspi2: dspi2grp {
+		fsl,pins = <
+			VF610_PAD_PTD31__DSPI2_CS1	0x1182
+			VF610_PAD_PTD30__DSPI2_CS0	0x1182
+			VF610_PAD_PTD29__DSPI2_SIN	0x1181
+			VF610_PAD_PTD28__DSPI2_SOUT	0x1182
+			VF610_PAD_PTD27__DSPI2_SCK	0x1182
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+			VF610_PAD_PTA7__GPIO_134	0x219d
+		>;
+	};
+
+	pinctrl_fec0: fec0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ENET_RMII0_MDC	0x30d2
+			VF610_PAD_PTC1__ENET_RMII0_MDIO	0x30d3
+			VF610_PAD_PTC2__ENET_RMII0_CRS	0x30d1
+			VF610_PAD_PTC3__ENET_RMII0_RXD1	0x30d1
+			VF610_PAD_PTC4__ENET_RMII0_RXD0	0x30d1
+			VF610_PAD_PTC5__ENET_RMII0_RXER	0x30d1
+			VF610_PAD_PTC6__ENET_RMII0_TXD1	0x30d2
+			VF610_PAD_PTC7__ENET_RMII0_TXD0	0x30d2
+			VF610_PAD_PTC8__ENET_RMII0_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+		fsl,pins = <
+			VF610_PAD_PTB22__GPIO_44	0x33e2
+			VF610_PAD_PTB21__GPIO_43	0x33e2
+			VF610_PAD_PTB20__GPIO_42	0x33e1
+			VF610_PAD_PTB19__GPIO_41	0x33e2
+			VF610_PAD_PTB18__GPIO_40	0x33e2
+		>;
+	};
+
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+		fsl,pins = <
+			VF610_PAD_PTB5__GPIO_27		0x219d
+		>;
+	};
+
+	pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
+		fsl,pins = <
+			VF610_PAD_PTB4__GPIO_26		0x219d
+		>;
+	};
+
+	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
+		fsl,pins = <
+			 VF610_PAD_PTE14__GPIO_119	0x31c2
+			 >;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL	0x37ff
+			VF610_PAD_PTB15__I2C0_SDA	0x37ff
+		>;
+	};
+
+	pinctrl_i2c0_gpio: i2c0grp-gpio {
+		fsl,pins = <
+			VF610_PAD_PTB14__GPIO_36	0x31c2
+			VF610_PAD_PTB15__GPIO_37	0x31c2
+		>;
+	};
+
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL	0x37ff
+			VF610_PAD_PTB17__I2C1_SDA	0x37ff
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			VF610_PAD_PTA22__I2C2_SCL	0x37ff
+			VF610_PAD_PTA23__I2C2_SDA	0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			 VF610_PAD_PTD20__GPIO_74	0x31c2
+			 >;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__QSPI0_A_QSCK	0x38c2
+			VF610_PAD_PTD1__QSPI0_A_CS0	0x38c2
+			VF610_PAD_PTD2__QSPI0_A_DATA3	0x38c3
+			VF610_PAD_PTD3__QSPI0_A_DATA2	0x38c3
+			VF610_PAD_PTD4__QSPI0_A_DATA1	0x38c3
+			VF610_PAD_PTD5__QSPI0_A_DATA0	0x38c3
+			VF610_PAD_PTD7__QSPI0_B_QSCK	0x38c2
+			VF610_PAD_PTD8__QSPI0_B_CS0	0x38c2
+			VF610_PAD_PTD9__QSPI0_B_DATA3	0x38c3
+			VF610_PAD_PTD10__QSPI0_B_DATA2	0x38c3
+			VF610_PAD_PTD11__QSPI0_B_DATA1	0x38c3
+			VF610_PAD_PTD12__QSPI0_B_DATA0	0x38c3
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX	0x21a2
+			VF610_PAD_PTB11__UART0_RX	0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB23__UART1_TX	0x21a2
+			VF610_PAD_PTB24__UART1_RX	0x21a1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD23__UART2_TX	0x21a2
+			VF610_PAD_PTD22__UART2_RX	0x21a1
+		>;
+	};
+
+	pinctrl_usb_vbus: pinctrl-usb-vbus {
+		fsl,pins = <
+			VF610_PAD_PTA16__GPIO_6	0x31c2
+		>;
+	};
+
+	pinctrl_usb0_host: usb0-host-grp {
+		fsl,pins = <
+			VF610_PAD_PTD6__GPIO_85		0x0062
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
new file mode 100644
index 0000000000000..df1335492a199
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
@@ -0,0 +1,876 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright (C) 2016-2018 Zodiac Inflight Innovations
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 SCU4 AIB";
+	compatible = "zii,vf610scu4-aib", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio-mux {
+		compatible = "mdio-mux-gpio";
+		pinctrl-0 = <&pinctrl_mdio_mux>;
+		pinctrl-names = "default";
+		gpios = <&gpio4 4  GPIO_ACTIVE_HIGH
+			 &gpio4 5  GPIO_ACTIVE_HIGH
+			 &gpio3 30 GPIO_ACTIVE_HIGH
+			 &gpio3 31 GPIO_ACTIVE_HIGH>;
+		mdio-parent-bus = <&mdio1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio_mux_1: mdio@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0: switch0@0 {
+				compatible = "marvell,mv88e6190";
+				reg = <0>;
+				dsa,member = <0 0>;
+				eeprom-length = <65536>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						phy-mode = "rmii";
+						ethernet = <&fec1>;
+
+						fixed-link {
+							speed = <100>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "aib2main_1";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "aib2main_2";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "eth_cu_1000_5";
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "eth_cu_1000_6";
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "eth_cu_1000_4";
+					};
+
+					port@6 {
+						reg = <6>;
+						label = "eth_cu_1000_7";
+					};
+
+					port@7 {
+						reg = <7>;
+						label = "modem_pic";
+
+						fixed-link {
+							speed = <100>;
+							full-duplex;
+						};
+					};
+
+					switch0port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "xgmii";
+						link = <&switch1port10
+							&switch3port10
+							&switch2port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+
+		mdio_mux_2: mdio@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1: switch1@0 {
+				compatible = "marvell,mv88e6190";
+				reg = <0>;
+				dsa,member = <0 1>;
+				eeprom-length = <65536>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@1 {
+						reg = <1>;
+						label = "eth_cu_1000_3";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "eth_cu_100_2";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "eth_cu_100_3";
+					};
+
+					switch1port9: port@9 {
+						reg = <9>;
+						label = "dsa";
+						phy-mode = "xgmii";
+						link = <&switch3port10
+							&switch2port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
+					};
+
+					switch1port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "xgmii";
+						link = <&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+
+		mdio_mux_4: mdio@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch2: switch2@0 {
+				compatible = "marvell,mv88e6190";
+				reg = <0>;
+				dsa,member = <0 2>;
+				eeprom-length = <65536>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@2 {
+						reg = <2>;
+						label = "eth_fc_1000_2";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff1>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "eth_fc_1000_3";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff2>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "eth_fc_1000_4";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff3>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "eth_fc_1000_5";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff4>;
+					};
+
+					port@6 {
+						reg = <6>;
+						label = "eth_fc_1000_6";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff5>;
+					};
+
+					port@7 {
+						reg = <7>;
+						label = "eth_fc_1000_7";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff6>;
+					};
+
+					port@9 {
+						reg = <9>;
+						label = "eth_fc_1000_1";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff0>;
+					};
+
+					switch2port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "2500base-x";
+						link = <&switch3port9
+							&switch1port9
+							&switch0port10>;
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+
+		mdio_mux_8: mdio@8 {
+			reg = <8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch3: switch3@0 {
+				compatible = "marvell,mv88e6190";
+				reg = <0>;
+				dsa,member = <0 3>;
+				eeprom-length = <65536>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@2 {
+						reg = <2>;
+						label = "eth_fc_1000_8";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff7>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "eth_fc_1000_9";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff8>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "eth_fc_1000_10";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff9>;
+					};
+
+					switch3port9: port@9 {
+						reg = <9>;
+						label = "dsa";
+						phy-mode = "2500base-x";
+						link = <&switch2port10>;
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
+					};
+
+					switch3port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "xgmii";
+						link = <&switch1port9
+							&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	sff0: sff0 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff0_i2c>;
+		los-gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff1: sff1 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff1_i2c>;
+		los-gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff2: sff2 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff2_i2c>;
+		los-gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff3: sff3 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff3_i2c>;
+		los-gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff4: sff4 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff4_i2c>;
+		los-gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff5: sff5 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff5_i2c>;
+		los-gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff6: sff6 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff6_i2c>;
+		los-gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff7: sff7 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff7_i2c>;
+		los-gpios = <&gpio9 7 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff8: sff8 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff8_i2c>;
+		los-gpios = <&gpio9 8 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff9: sff9 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff9_i2c>;
+		los-gpios = <&gpio9 9 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&dspi0 {
+	pinctrl-0 = <&pinctrl_dspi0>;
+	pinctrl-names = "default";
+	bus-num = <0>;
+	status = "okay";
+
+	adc@5 {
+		compatible = "holt,hi8435";
+		reg = <5>;
+		gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-0";
+			reg = <0x0 0x01000000>;
+		};
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-1";
+			reg = <0x0 0x01000000>;
+		};
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-sdio;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		   speed = <100>;
+		   full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	gpio5: io-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio6: io-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	temp-sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+
+	elapsed-time-recorder@6b {
+		compatible = "dallas,ds1682";
+		reg = <0x6b>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+
+	adc@4a {
+		compatible = "adi,adt7411";
+		reg = <0x4a>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	gpio9: io-expander@20 {
+		compatible = "semtech,sx1503q";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sx1503_20>;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+		gpio-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	temp-sensor@4e {
+		compatible = "national,lm75";
+		reg = <0x4e>;
+	};
+
+	temp-sensor@4f {
+		compatible = "national,lm75";
+		reg = <0x4f>;
+	};
+
+	gpio7: io-expander@23 {
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x23>;
+	};
+
+	adc@4a {
+		compatible = "adi,adt7411";
+		reg = <0x4a>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		sff0_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		sff1_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		sff2_i2c: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		sff3_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		sff4_i2c: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		pinctrl-names = "default";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		sff5_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		sff6_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		sff7_i2c: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		sff8_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		sff9_i2c: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+	};
+};
+
+&snvsrtc {
+	status = "disabled";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dspi0: dspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTB19__DSPI0_CS0		0x1182
+			VF610_PAD_PTB18__DSPI0_CS1		0x1182
+			VF610_PAD_PTB13__DSPI0_CS4		0x1182
+			VF610_PAD_PTB12__DSPI0_CS5		0x1182
+			VF610_PAD_PTB20__DSPI0_SIN		0x1181
+			VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+			VF610_PAD_PTB22__DSPI0_SCK		0x1182
+		>;
+	};
+
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTD4__DSPI1_CS1		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_dspi2: dspi2gpio {
+		fsl,pins = <
+			VF610_PAD_PTD30__GPIO_64		0x33e2
+			VF610_PAD_PTD29__GPIO_65		0x33e1
+			VF610_PAD_PTD28__GPIO_66		0x33e2
+			VF610_PAD_PTD27__GPIO_67		0x33e2
+			VF610_PAD_PTD26__GPIO_68		0x31c2
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			VF610_PAD_PTA22__I2C2_SCL		0x37ff
+			VF610_PAD_PTA23__I2C2_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			 VF610_PAD_PTB26__GPIO_96		0x31c2
+		   >;
+	};
+
+	pinctrl_mdio_mux: pinctrl-mdio-mux {
+		fsl,pins = <
+			VF610_PAD_PTE27__GPIO_132		0x31c2
+			VF610_PAD_PTE28__GPIO_133		0x31c2
+			VF610_PAD_PTE21__GPIO_126		0x31c2
+			VF610_PAD_PTE22__GPIO_127		0x31c2
+		>;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTD7__QSPI0_B_QSCK		0x31c3
+			VF610_PAD_PTD8__QSPI0_B_CS0		0x31ff
+			VF610_PAD_PTD9__QSPI0_B_DATA3		0x31c3
+			VF610_PAD_PTD10__QSPI0_B_DATA2		0x31c3
+			VF610_PAD_PTD11__QSPI0_B_DATA1		0x31c3
+			VF610_PAD_PTD12__QSPI0_B_DATA0		0x31c3
+		>;
+	};
+
+	pinctrl_sx1503_20: pinctrl-sx1503-20 {
+		fsl,pins = <
+			VF610_PAD_PTD31__GPIO_63		0x219d
+			>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB23__UART1_TX		0x21a2
+			VF610_PAD_PTB24__UART1_RX		0x21a1
+			VF610_PAD_PTB25__UART1_RTS		0x21a2	/* Used as DE signal for the RS-485 transceiver */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__UART2_TX		0x21a2
+			VF610_PAD_PTD1__UART2_RX		0x21a1
+			VF610_PAD_PTD2__UART2_RTS		0x21a2 /* Used as DE signal for the RS-485 transceiver */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
new file mode 100644
index 0000000000000..1461804ecaea3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SPB4 board
+ *
+ * SPB - Seat Power Box
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 SPB4 Board";
+	compatible = "zii,vf610spb4", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 28V_SW   */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-sdio;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+
+		switch0: switch0@0 {
+			compatible = "marvell,mv88e6190";
+			pinctrl-0 = <&pinctrl_gpio_switch0>;
+			pinctrl-names = "default";
+			reg = <0>;
+			eeprom-length = <65536>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					phy-mode = "rmii";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "eth_cu_1000_2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "eth_cu_1000_3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "eth_cu_1000_4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "eth_cu_1000_5";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "eth_cu_1000_6";
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	io-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		label = "nameplate";
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+};
+
+&snvsrtc {
+	status = "disabled";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+
+	mcu {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&wdoga5 {
+       status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTD4__DSPI1_CS1		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98		0x219d
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			VF610_PAD_PTD3__GPIO_82			0x31c2
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB23__UART1_TX		0x21a2
+			VF610_PAD_PTB24__UART1_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__UART2_TX		0x21a2
+			VF610_PAD_PTD1__UART2_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			VF610_PAD_PTA30__UART3_TX		0x21a2
+			VF610_PAD_PTA31__UART3_RX		0x21a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
new file mode 100644
index 0000000000000..463c2452b9b7f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SSMB DTU board
+ *
+ * SSMB - SPU3 Switch Management Board
+ * DTU - Digital Tapping Unit
+ *
+ * Copyright (C) 2015-2019 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 SSMB DTU Board";
+	compatible = "zii,vf610dtu", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 12V_MAIN */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-sdio;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+
+		switch0: switch0@0 {
+			compatible = "marvell,mv88e6190";
+			pinctrl-0 = <&pinctrl_gpio_switch0>;
+			pinctrl-names = "default";
+			reg = <0>;
+			eeprom-length = <65536>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					phy-mode = "rmii";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_100_3";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "eth_cu_1000_4";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "eth_cu_1000_5";
+				};
+
+				port@8 {
+					reg = <8>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@9 {
+					reg = <9>;
+					label = "eth_cu_1000_2";
+					phy-handle = <&phy9>;
+					phy-mode = "sgmii";
+					managed = "in-band-status";
+				};
+			};
+
+			mdio1 {
+				compatible = "marvell,mv88e6xxx-mdio-external";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy9: phy9@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					pinctrl-0 = <&pinctrl_gpio_phy9>;
+					pinctrl-names = "default";
+					interrupt-parent = <&gpio2>;
+					interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+					reg = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	gpio6: gpio-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	/* On SSMB */
+	temperature-sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	/* On DSB */
+	temperature-sensor@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		label = "nameplate";
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&snvsrtc {
+	status = "disabled";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTD4__DSPI1_CS1		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_phy9: pinctrl-gpio-phy9 {
+		fsl,pins = <
+			VF610_PAD_PTB24__GPIO_94		0x219d
+		>;
+	};
+
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98		0x219d
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			VF610_PAD_PTD3__GPIO_82			0x31c2
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
new file mode 100644
index 0000000000000..f5ae0d5de3151
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SSMB SPU3 board
+ *
+ * SSMB - SPU3 Switch Management Board
+ * SPU - Seat Power Unit
+ *
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 SSMB SPU3 Board";
+	compatible = "zii,vf610spu3", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 12V_MAIN */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	/*
+	 * Some SPU3s come with SPI-NOR chip DNPed, so we leave this
+	 * node disabled by default and rely on bootloader to enable
+	 * it when appropriate.
+	 */
+	status = "disabled";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-0";
+			reg = <0x0 0x01000000>;
+		};
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-sdio;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+
+		switch0: switch0@0 {
+			compatible = "marvell,mv88e6190";
+			pinctrl-0 = <&pinctrl_gpio_switch0>;
+			pinctrl-names = "default";
+			reg = <0>;
+			eeprom-length = <65536>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					phy-mode = "rmii";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "eth_cu_1000_2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "eth_cu_1000_3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "eth_cu_1000_4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "eth_cu_1000_5";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "eth_cu_1000_6";
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	gpio6: io-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		label = "nameplate";
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+};
+
+&snvsrtc {
+	status = "disabled";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+
+	mcu {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&wdoga5 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTD4__DSPI1_CS1		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98		0x219d
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			VF610_PAD_PTD3__GPIO_82			0x31c2
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB23__UART1_TX		0x21a2
+			VF610_PAD_PTB24__UART1_RX		0x21a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610.dtsi b/arch/arm/boot/dts/nxp/vf/vf610.dtsi
new file mode 100644
index 0000000000000..2fba923821d02
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include "vf500.dtsi"
+
+&a5_cpu {
+	next-level-cache = <&L2>;
+};
+
+&aips0 {
+	L2: cache-controller@40006000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x40006000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts b/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts
new file mode 100644
index 0000000000000..2c2db47af4416
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device tree for Colibri VF61 Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+	model = "VF610 Cortex-M4";
+	compatible = "fsl,vf610m4";
+
+	chosen {
+		bootargs = "clk_ignore_unused init=/linuxrc rw";
+		stdout-path = "serial2:115200";
+	};
+
+	memory@8c000000 {
+		device_type = "memory";
+		reg = <0x8c000000 0x3000000>;
+	};
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				VF610_PAD_PTD0__UART2_TX		0x21a2
+				VF610_PAD_PTD1__UART2_RX		0x21a1
+				VF610_PAD_PTD2__UART2_RTS		0x21a2
+				VF610_PAD_PTD3__UART2_CTS		0x21a1
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts b/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts
new file mode 100644
index 0000000000000..f7474c11aabd0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts
@@ -0,0 +1,90 @@
+/*
+ * Device tree for Cosmic+ VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015
+ *
+ * Based on vf610m4 Colibri
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+	model = "VF610 Cortex-M4";
+	compatible = "fsl,vf610m4";
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-cosmic {
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				VF610_PAD_PTA20__UART3_TX		0x21a2
+				VF610_PAD_PTA21__UART3_RX		0x21a1
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
new file mode 100644
index 0000000000000..2bb331a877210
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Device tree for VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "../../armv7-m.dtsi"
+#include "vfxxx.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+};
+
+&mscm_ir {
+	interrupt-parent = <&nvic>;
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
new file mode 100644
index 0000000000000..3f7dc787938ee
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
@@ -0,0 +1,751 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include "vf610-pinfunc.h"
+#include <dt-bindings/clock/vf610-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		ethernet0 = &fec0;
+		ethernet1 = &fec1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		usbphy0 = &usbphy0;
+		usbphy1 = &usbphy1;
+	};
+
+	fxosc: fxosc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	sxosc: sxosc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	reboot: syscon-reboot {
+		compatible = "syscon-reboot";
+		regmap = <&src>;
+		offset = <0x0>;
+		mask = <0x1000>;
+	};
+
+	tempsensor: iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 16>, <&adc1 16>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&mscm_ir>;
+		ranges;
+
+		aips0: bus@40000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x00070000>;
+			ranges;
+
+			mscm_cpucfg: cpucfg@40001000 {
+				compatible = "fsl,vf610-mscm-cpucfg", "syscon";
+				reg = <0x40001000 0x800>;
+			};
+
+			mscm_ir: interrupt-controller@40001800 {
+				compatible = "fsl,vf610-mscm-ir";
+				reg = <0x40001800 0x400>;
+				fsl,cpucfg = <&mscm_cpucfg>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			edma0: dma-controller@40018000 {
+				#dma-cells = <2>;
+				compatible = "fsl,vf610-edma";
+				reg = <0x40018000 0x2000>,
+					<0x40024000 0x1000>,
+					<0x40025000 0x1000>;
+				dma-channels = <32>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+						<9 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma-tx", "edma-err";
+				clock-names = "dmamux0", "dmamux1";
+				clocks = <&clks VF610_CLK_DMAMUX0>,
+					<&clks VF610_CLK_DMAMUX1>;
+				status = "disabled";
+			};
+
+			can0: can@40020000 {
+				compatible = "fsl,vf610-flexcan";
+				reg = <0x40020000 0x4000>;
+				interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_FLEXCAN0>,
+					 <&clks VF610_CLK_FLEXCAN0>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart0: serial@40027000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40027000 0x1000>;
+				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART0>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 2>,
+					<&edma0 0 3>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			uart1: serial@40028000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40028000 0x1000>;
+				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART1>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 4>,
+					<&edma0 0 5>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			uart2: serial@40029000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40029000 0x1000>;
+				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART2>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 6>,
+					<&edma0 0 7>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			uart3: serial@4002a000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x4002a000 0x1000>;
+				interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART3>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 8>,
+					<&edma0 0 9>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			dspi0: spi@4002c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002c000 0x1000>;
+				interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI0>;
+				clock-names = "dspi";
+				spi-num-chipselects = <6>;
+				dmas = <&edma1 1 12>,
+					<&edma1 1 13>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			dspi1: spi@4002d000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002d000 0x1000>;
+				interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI1>;
+				clock-names = "dspi";
+				spi-num-chipselects = <4>;
+				dmas = <&edma1 1 14>,
+					<&edma1 1 15>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai0: sai@4002f000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x4002f000 0x1000>;
+				interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI0>,
+					<&clks VF610_CLK_SAI0_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 16>, <&edma0 0 17>;
+				status = "disabled";
+			};
+
+			sai1: sai@40030000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40030000 0x1000>;
+				interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI1>,
+					<&clks VF610_CLK_SAI1_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 18>, <&edma0 0 19>;
+				status = "disabled";
+			};
+
+			sai2: sai@40031000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40031000 0x1000>;
+				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI2>,
+					<&clks VF610_CLK_SAI2_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 20>, <&edma0 0 21>;
+				status = "disabled";
+			};
+
+			sai3: sai@40032000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40032000 0x1000>;
+				interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI3>,
+					<&clks VF610_CLK_SAI3_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&edma0 1 8>, <&edma0 1 9>;
+				status = "disabled";
+			};
+
+			pit: pit@40037000 {
+				compatible = "fsl,vf610-pit";
+				reg = <0x40037000 0x1000>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_PIT>;
+				clock-names = "pit";
+			};
+
+			pwm0: pwm@40038000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				#pwm-cells = <3>;
+				reg = <0x40038000 0x1000>;
+				clock-names = "ftm_sys", "ftm_ext",
+					      "ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks VF610_CLK_FTM0>,
+					<&clks VF610_CLK_FTM0_EXT_SEL>,
+					<&clks VF610_CLK_FTM0_FIX_SEL>,
+					<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
+			pwm1: pwm@40039000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				#pwm-cells = <3>;
+				reg = <0x40039000 0x1000>;
+				clock-names = "ftm_sys", "ftm_ext",
+					      "ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks VF610_CLK_FTM1>,
+					<&clks VF610_CLK_FTM1_EXT_SEL>,
+					<&clks VF610_CLK_FTM1_FIX_SEL>,
+					<&clks VF610_CLK_FTM1_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
+			adc0: adc@4003b000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x4003b000 0x1000>;
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_ADC0>;
+				clock-names = "adc";
+				#io-channel-cells = <1>;
+				status = "disabled";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							<20000000>;
+			};
+
+			tcon0: timing-controller@4003d000 {
+				compatible = "fsl,vf610-tcon";
+				reg = <0x4003d000 0x1000>;
+				clocks = <&clks VF610_CLK_TCON0>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			wdoga5: watchdog@4003e000 {
+				compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
+				reg = <0x4003e000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_WDT>;
+				status = "disabled";
+			};
+
+			qspi0: spi@40044000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-qspi";
+				reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_QSPI0_EN>,
+					<&clks VF610_CLK_QSPI0>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@40048000 {
+				compatible = "fsl,vf610-iomuxc";
+				reg = <0x40048000 0x1000>;
+			};
+
+			gpio0: gpio@40049000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x40049000 0x1000 0x400ff000 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 0 32>;
+			};
+
+			gpio1: gpio@4004a000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004a000 0x1000 0x400ff040 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 32 32>;
+			};
+
+			gpio2: gpio@4004b000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004b000 0x1000 0x400ff080 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 64 32>;
+			};
+
+			gpio3: gpio@4004c000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 96 32>;
+			};
+
+			gpio4: gpio@4004d000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004d000 0x1000 0x400ff100 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 128 7>;
+			};
+
+			anatop: anatop@40050000 {
+				compatible = "fsl,vf610-anatop", "syscon";
+				reg = <0x40050000 0x400>;
+			};
+
+			usbphy0: usbphy@40050800 {
+				compatible = "fsl,vf610-usbphy";
+				reg = <0x40050800 0x400>;
+				interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_USBPHY0>;
+				fsl,anatop = <&anatop>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy@40050c00 {
+				compatible = "fsl,vf610-usbphy";
+				reg = <0x40050c00 0x400>;
+				interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+				status = "disabled";
+			};
+
+			dcu0: dcu@40058000 {
+				compatible = "fsl,vf610-dcu";
+				reg = <0x40058000 0x1200>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DCU0>,
+					<&clks VF610_CLK_DCU0_DIV>;
+				clock-names = "dcu", "pix";
+				fsl,tcon = <&tcon0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@40066000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x40066000 0x1000>;
+				interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C0>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 50>,
+					<&edma0 0 51>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			i2c1: i2c@40067000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x40067000 0x1000>;
+				interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C1>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 52>,
+					<&edma0 0 53>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			clks: ccm@4006b000 {
+				compatible = "fsl,vf610-ccm";
+				reg = <0x4006b000 0x1000>;
+				clocks = <&sxosc>, <&fxosc>;
+				clock-names = "sxosc", "fxosc";
+				#clock-cells = <1>;
+			};
+
+			usbdev0: usb@40034000 {
+				compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+				reg = <0x40034000 0x800>;
+				interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_USBC0>;
+				fsl,usbphy = <&usbphy0>;
+				fsl,usbmisc = <&usbmisc0 0>;
+				dr_mode = "peripheral";
+				status = "disabled";
+			};
+
+			usbmisc0: usb@40034800 {
+				#index-cells = <1>;
+				compatible = "fsl,vf610-usbmisc";
+				reg = <0x40034800 0x200>;
+				clocks = <&clks VF610_CLK_USBC0>;
+				status = "disabled";
+			};
+
+			src: src@4006e000 {
+				compatible = "fsl,vf610-src", "syscon";
+				reg = <0x4006e000 0x1000>;
+				interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aips1: bus@40080000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40080000 0x0007f000>;
+			ranges;
+
+			edma1: dma-controller@40098000 {
+				#dma-cells = <2>;
+				compatible = "fsl,vf610-edma";
+				reg = <0x40098000 0x2000>,
+					<0x400a1000 0x1000>,
+					<0x400a2000 0x1000>;
+				dma-channels = <32>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+						<11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma-tx", "edma-err";
+				clock-names = "dmamux0", "dmamux1";
+				clocks = <&clks VF610_CLK_DMAMUX2>,
+					<&clks VF610_CLK_DMAMUX3>;
+				status = "disabled";
+			};
+
+			ocotp: ocotp@400a5000 {
+				compatible = "fsl,vf610-ocotp", "syscon";
+				reg = <0x400a5000 0x1000>;
+				clocks = <&clks VF610_CLK_OCOTP>;
+			};
+
+			snvs0: snvs@400a7000 {
+			    compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x400a7000 0x2000>;
+
+				snvsrtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs0>;
+					offset = <0x34>;
+					interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks VF610_CLK_SNVS>;
+					clock-names = "snvs-rtc";
+				};
+			};
+
+			uart4: serial@400a9000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x400a9000 0x1000>;
+				interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART4>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			uart5: serial@400aa000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x400aa000 0x1000>;
+				interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART5>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			dspi2: spi@400ac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x400ac000 0x1000>;
+				interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI2>;
+				clock-names = "dspi";
+				spi-num-chipselects = <2>;
+				dmas = <&edma1 0 10>,
+					<&edma1 0 11>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			dspi3: spi@400ad000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x400ad000 0x1000>;
+				interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI3>;
+				clock-names = "dspi";
+				spi-num-chipselects = <2>;
+				dmas = <&edma1 0 12>,
+					<&edma1 0 13>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			adc1: adc@400bb000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x400bb000 0x1000>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_ADC1>;
+				clock-names = "adc";
+				#io-channel-cells = <1>;
+				status = "disabled";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							<20000000>;
+			};
+
+			esdhc0: esdhc@400b1000 {
+				compatible = "fsl,imx53-esdhc";
+				reg = <0x400b1000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_IPG_BUS>,
+					<&clks VF610_CLK_PLATFORM_BUS>,
+					<&clks VF610_CLK_ESDHC0>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc1: esdhc@400b2000 {
+				compatible = "fsl,imx53-esdhc";
+				reg = <0x400b2000 0x1000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_IPG_BUS>,
+					<&clks VF610_CLK_PLATFORM_BUS>,
+					<&clks VF610_CLK_ESDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			usbh1: usb@400b4000 {
+				compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+				reg = <0x400b4000 0x800>;
+				interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_USBC1>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc1: usb@400b4800 {
+				#index-cells = <1>;
+				compatible = "fsl,vf610-usbmisc";
+				reg = <0x400b4800 0x200>;
+				clocks = <&clks VF610_CLK_USBC1>;
+				status = "disabled";
+			};
+
+			ftm: ftm@400b8000 {
+				compatible = "fsl,ftm-timer";
+				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "ftm-evt", "ftm-src",
+					"ftm-evt-counter-en", "ftm-src-counter-en";
+				clocks = <&clks VF610_CLK_FTM2>,
+					<&clks VF610_CLK_FTM3>,
+					<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
+					<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
+			qspi1: spi@400c4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-qspi";
+				reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_QSPI1_EN>,
+					<&clks VF610_CLK_QSPI1>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			dac0: dac@400cc000 {
+				compatible = "fsl,vf610-dac";
+				reg = <0x400cc000 1000>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "dac";
+				clocks = <&clks VF610_CLK_DAC0>;
+				status = "disabled";
+			};
+
+			dac1: dac@400cd000 {
+				compatible = "fsl,vf610-dac";
+				reg = <0x400cd000 1000>;
+				interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "dac";
+				clocks = <&clks VF610_CLK_DAC1>;
+				status = "disabled";
+			};
+
+			fec0: ethernet@400d0000 {
+				compatible = "fsl,mvf600-fec";
+				reg = <0x400d0000 0x1000>;
+				interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_ENET0>,
+					<&clks VF610_CLK_ENET0>,
+					<&clks VF610_CLK_ENET>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			fec1: ethernet@400d1000 {
+				compatible = "fsl,mvf600-fec";
+				reg = <0x400d1000 0x1000>;
+				interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_ENET1>,
+					<&clks VF610_CLK_ENET1>,
+					<&clks VF610_CLK_ENET>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			can1: can@400d4000 {
+				compatible = "fsl,vf610-flexcan";
+				reg = <0x400d4000 0x4000>;
+				interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_FLEXCAN1>,
+					 <&clks VF610_CLK_FLEXCAN1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			nfc: nand@400e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-nfc";
+				reg = <0x400e0000 0x4000>;
+				interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_NFC>;
+				clock-names = "nfc";
+				status = "disabled";
+			};
+
+			i2c2: i2c@400e6000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x400e6000 0x1000>;
+				interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C2>;
+				clock-names = "ipg";
+				dmas = <&edma0 1 36>,
+					<&edma0 1 37>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@400e7000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x400e7000 0x1000>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C3>;
+				clock-names = "ipg";
+				dmas = <&edma0 1 38>,
+					<&edma0 1 39>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			crypto: crypto@400f0000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x400f0000 0x9000>;
+				ranges = <0 0x400f0000 0x9000>;
+				clocks = <&clks VF610_CLK_CAAM>;
+				clock-names = "ipg";
+
+				sec_jr0: jr0@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
deleted file mode 100644
index 3046ec572632d..0000000000000
--- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common file for GPMC connected smsc911x on omaps
- *
- * Note that the board specifc DTS file needs to specify
- * ranges, pinctrl, reg, interrupt parent and interrupts.
- */
-
-/ {
-	vddvario: regulator-vddvario {
-		compatible = "regulator-fixed";
-		regulator-name = "vddvario";
-		regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-};
-
-&gpmc {
-	ethernet@gpmc {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		bank-width = <2>;
-		gpmc,device-width = <1>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		gpmc,cs-on-ns = <5>;
-		gpmc,cs-rd-off-ns = <150>;
-		gpmc,cs-wr-off-ns = <150>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <15>;
-		gpmc,adv-wr-off-ns = <40>;
-		gpmc,oe-on-ns = <45>;
-		gpmc,oe-off-ns = <140>;
-		gpmc,we-on-ns = <45>;
-		gpmc,we-off-ns = <140>;
-		gpmc,rd-cycle-ns = <155>;
-		gpmc,wr-cycle-ns = <155>;
-		gpmc,access-ns = <120>;
-		gpmc,page-burst-access-ns = <20>;
-		gpmc,bus-turnaround-ns = <75>;
-		gpmc,cycle2cycle-delay-ns = <75>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,wr-access-ns = <0>;
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
-	};
-};
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
deleted file mode 100644
index bc8961f3690f0..0000000000000
--- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common file for GPMC connected smsc9221 on omaps
- *
- * Compared to smsc911x, smsc9221 (and others like smsc9217
- * or smsc 9218) has faster timings, leading to higher
- * bandwidth.
- *
- * Note that the board specifc DTS file needs to specify
- * ranges, pinctrl, reg, interrupt parent and interrupts.
- */
-
-/ {
-	vddvario: regulator-vddvario {
-		compatible = "regulator-fixed";
-		regulator-name = "vddvario";
-		regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-};
-
-&gpmc {
-	ethernet@gpmc {
-		compatible = "smsc,lan9221","smsc,lan9115";
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <42>;
-		gpmc,cs-wr-off-ns = <36>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <12>;
-		gpmc,adv-wr-off-ns = <12>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <42>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <36>;
-		gpmc,rd-cycle-ns = <60>;
-		gpmc,wr-cycle-ns = <54>;
-		gpmc,access-ns = <36>;
-		gpmc,page-burst-access-ns = <0>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <18>;
-		gpmc,wr-access-ns = <42>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
-	};
-};
diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
deleted file mode 100644
index 8adc0ef01f6c6..0000000000000
--- a/arch/arm/boot/dts/omap-zoom-common.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common features on the Zoom debug board
- */
-
-#include "omap-gpmc-smsc911x.dtsi"
-
-&gpmc {
-	ranges = <3 0 0x10000000 0x1000000>,	/* CS3: 16MB for UART */
-		 <7 0 0x2c000000 0x01000000>;
-
-	/*
-	 * Four port TL16CP754C serial port on GPMC,
-	 * they probably share the same GPIO IRQ
-	 * REVISIT: Add timing support from slls644g.pdf
-	 */
-	serial@3,0 {
-		compatible = "ns16550a";
-		reg = <3 0 8>;	/* CS3, offset 0, IO size 8 */
-		bank-width = <2>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
-		clock-frequency = <1843200>;
-		current-speed = <115200>;
-		gpmc,mux-add-data = <0>;
-		gpmc,device-width = <1>;
-		gpmc,wait-pin = <1>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		gpmc,cs-on-ns = <5>;
-		gpmc,cs-rd-off-ns = <155>;
-		gpmc,cs-wr-off-ns = <155>;
-		gpmc,adv-on-ns = <15>;
-		gpmc,adv-rd-off-ns = <40>;
-		gpmc,adv-wr-off-ns = <40>;
-		gpmc,oe-on-ns = <45>;
-		gpmc,oe-off-ns = <145>;
-		gpmc,we-on-ns = <45>;
-		gpmc,we-off-ns = <145>;
-		gpmc,rd-cycle-ns = <155>;
-		gpmc,wr-cycle-ns = <155>;
-		gpmc,access-ns = <145>;
-		gpmc,page-burst-access-ns = <20>;
-		gpmc,bus-turnaround-ns = <20>;
-		gpmc,cycle2cycle-delay-ns = <20>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <45>;
-		gpmc,wr-access-ns = <145>;
-	};
-	serial@3,1 {
-		compatible = "ns16550a";
-		reg = <3 0x100 8>;	/* CS3, offset 0x100, IO size 8 */
-		bank-width = <2>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
-		clock-frequency = <1843200>;
-		current-speed = <115200>;
-	};
-	serial@3,2 {
-		compatible = "ns16550a";
-		reg = <3 0x200 8>;	/* CS3, offset 0x200, IO size 8 */
-		bank-width = <2>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
-		clock-frequency = <1843200>;
-		current-speed = <115200>;
-	};
-	serial@3,3 {
-		compatible = "ns16550a";
-		reg = <3 0x300 8>;	/* CS3, offset 0x300, IO size 8 */
-		bank-width = <2>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
-		clock-frequency = <1843200>;
-		current-speed = <115200>;
-	};
-
-	ethernet@gpmc {
-		reg = <7 0 0xff>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;	/* gpio158 */
-	};
-};
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
deleted file mode 100644
index afabb36a8ac13..0000000000000
--- a/arch/arm/boot/dts/omap2.dtsi
+++ /dev/null
@@ -1,334 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP2 SoC
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-/ {
-	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm1136jf-s";
-			device_type = "cpu";
-		};
-	};
-
-	pmu {
-		compatible = "arm,arm1136-pmu";
-		interrupts = <3>;
-	};
-
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap2-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		aes: aes@480a6000 {
-			compatible = "ti,omap2-aes";
-			ti,hwmods = "aes";
-			reg = <0x480a6000 0x50>;
-			dmas = <&sdma 9 &sdma 10>;
-			dma-names = "tx", "rx";
-		};
-
-		hdq1w: 1w@480b2000 {
-			compatible = "ti,omap2420-1w";
-			ti,hwmods = "hdq1w";
-			reg = <0x480b2000 0x1000>;
-			interrupts = <58>;
-		};
-
-		intc: interrupt-controller@1 {
-			compatible = "ti,omap2-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x480FE000 0x1000>;
-		};
-
-		target-module@48056000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x48056000 0x4>,
-			      <0x4805602c 0x4>,
-			      <0x48056028 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&core_l3_ck>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48056000 0x1000>;
-
-			sdma: dma-controller@0 {
-				compatible = "ti,omap2420-sdma", "ti,omap-sdma";
-				reg = <0 0x1000>;
-				interrupts = <12>,
-					     <13>,
-					     <14>,
-					     <15>;
-				#dma-cells = <1>;
-				dma-channels = <32>;
-				dma-requests = <64>;
-			};
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap2-i2c";
-			ti,hwmods = "i2c1";
-			reg = <0x48070000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <56>;
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap2-i2c";
-			ti,hwmods = "i2c2";
-			reg = <0x48072000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <57>;
-		};
-
-		mcspi1: spi@48098000 {
-			compatible = "ti,omap2-mcspi";
-			ti,hwmods = "mcspi1";
-			reg = <0x48098000 0x100>;
-			interrupts = <65>;
-			dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
-				&sdma 39 &sdma 40 &sdma 41 &sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mcspi2: spi@4809a000 {
-			compatible = "ti,omap2-mcspi";
-			ti,hwmods = "mcspi2";
-			reg = <0x4809a000 0x100>;
-			interrupts = <66>;
-			dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		rng: rng@480a0000 {
-			compatible = "ti,omap2-rng";
-			ti,hwmods = "rng";
-			reg = <0x480a0000 0x50>;
-			interrupts = <52>;
-		};
-
-		sham: sham@480a4000 {
-			compatible = "ti,omap2-sham";
-			ti,hwmods = "sham";
-			reg = <0x480a4000 0x64>;
-			interrupts = <51>;
-			dmas = <&sdma 13>;
-			dma-names = "rx";
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap2-uart";
-			ti,hwmods = "uart1";
-			reg = <0x4806a000 0x2000>;
-			interrupts = <72>;
-			dmas = <&sdma 49 &sdma 50>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap2-uart";
-			ti,hwmods = "uart2";
-			reg = <0x4806c000 0x400>;
-			interrupts = <73>;
-			dmas = <&sdma 51 &sdma 52>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@4806e000 {
-			compatible = "ti,omap2-uart";
-			ti,hwmods = "uart3";
-			reg = <0x4806e000 0x400>;
-			interrupts = <74>;
-			dmas = <&sdma 53 &sdma 54>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-
-		timer2_target: target-module@4802a000 {
-			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			reg = <0x4802a000 0x4>,
-			      <0x4802a010 0x4>,
-			      <0x4802a014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&gpt2_fck>, <&gpt2_ick>;
-			clock-names = "fck", "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4802a000 0x1000>;
-
-			timer2: timer@0 {
-				compatible = "ti,omap2420-timer";
-				reg = <0 0x400>;
-				interrupts = <38>;
-			};
-		};
-
-		timer3: timer@48078000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48078000 0x400>;
-			interrupts = <39>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@4807a000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4807a000 0x400>;
-			interrupts = <40>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@4807c000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4807c000 0x400>;
-			interrupts = <41>;
-			ti,hwmods = "timer5";
-			ti,timer-dsp;
-		};
-
-		timer6: timer@4807e000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4807e000 0x400>;
-			interrupts = <42>;
-			ti,hwmods = "timer6";
-			ti,timer-dsp;
-		};
-
-		timer7: timer@48080000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48080000 0x400>;
-			interrupts = <43>;
-			ti,hwmods = "timer7";
-			ti,timer-dsp;
-		};
-
-		timer8: timer@48082000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48082000 0x400>;
-			interrupts = <44>;
-			ti,hwmods = "timer8";
-			ti,timer-dsp;
-		};
-
-		timer9: timer@48084000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48084000 0x400>;
-			interrupts = <45>;
-			ti,hwmods = "timer9";
-			ti,timer-pwm;
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48086000 0x400>;
-			interrupts = <46>;
-			ti,hwmods = "timer10";
-			ti,timer-pwm;
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48088000 0x400>;
-			interrupts = <47>;
-			ti,hwmods = "timer11";
-			ti,timer-pwm;
-		};
-
-		timer12: timer@4808a000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4808a000 0x400>;
-			interrupts = <48>;
-			ti,hwmods = "timer12";
-			ti,timer-pwm;
-		};
-
-		dss: dss@48050000 {
-			compatible = "ti,omap2-dss";
-			reg = <0x48050000 0x400>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc@48050400 {
-				compatible = "ti,omap2-dispc";
-				reg = <0x48050400 0x400>;
-				interrupts = <25>;
-				ti,hwmods = "dss_dispc";
-			};
-
-			rfbi: encoder@48050800 {
-				compatible = "ti,omap2-rfbi";
-				reg = <0x48050800 0x400>;
-				status = "disabled";
-				ti,hwmods = "dss_rfbi";
-			};
-
-			venc: encoder@48050c00 {
-				compatible = "ti,omap2-venc";
-				reg = <0x48050c00 0x400>;
-				status = "disabled";
-				ti,hwmods = "dss_venc";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap2420-clocks.dtsi b/arch/arm/boot/dts/omap2420-clocks.dtsi
deleted file mode 100644
index 00a7a199a91ca..0000000000000
--- a/arch/arm/boot/dts/omap2420-clocks.dtsi
+++ /dev/null
@@ -1,267 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP2420 clock data
- *
- * Copyright (C) 2014 Texas Instruments, Inc.
- */
-
-&prcm_clocks {
-	sys_clkout2_src_gate: sys_clkout2_src_gate@70 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <15>;
-		reg = <0x0070>;
-	};
-
-	sys_clkout2_src_mux: sys_clkout2_src_mux@70 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0070>;
-	};
-
-	sys_clkout2_src: sys_clkout2_src {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>;
-	};
-
-	sys_clkout2: sys_clkout2@70 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkout2_src>;
-		ti,bit-shift = <11>;
-		ti,max-div = <64>;
-		reg = <0x0070>;
-		ti,index-power-of-two;
-	};
-
-	dsp_gate_ick: dsp_gate_ick@810 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&dsp_fck>;
-		ti,bit-shift = <1>;
-		reg = <0x0810>;
-	};
-
-	dsp_div_ick: dsp_div_ick@840 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&dsp_fck>;
-		ti,bit-shift = <5>;
-		ti,max-div = <3>;
-		reg = <0x0840>;
-		ti,index-starts-at-one;
-	};
-
-	dsp_ick: dsp_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dsp_gate_ick>, <&dsp_div_ick>;
-	};
-
-	iva1_gate_ifck: iva1_gate_ifck@800 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0800>;
-	};
-
-	iva1_div_ifck: iva1_div_ifck@840 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0840>;
-		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
-	};
-
-	iva1_ifck: iva1_ifck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&iva1_gate_ifck>, <&iva1_div_ifck>;
-	};
-
-	iva1_ifck_div: iva1_ifck_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&iva1_ifck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	iva1_mpu_int_ifck: iva1_mpu_int_ifck@800 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&iva1_ifck_div>;
-		ti,bit-shift = <8>;
-		reg = <0x0800>;
-	};
-
-	wdt3_ick: wdt3_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <28>;
-		reg = <0x0210>;
-	};
-
-	wdt3_fck: wdt3_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <28>;
-		reg = <0x0200>;
-	};
-
-	mmc_ick: mmc_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <26>;
-		reg = <0x0210>;
-	};
-
-	mmc_fck: mmc_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <26>;
-		reg = <0x0200>;
-	};
-
-	eac_ick: eac_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0210>;
-	};
-
-	eac_fck: eac_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0200>;
-	};
-
-	i2c1_fck: i2c1_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_12m_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0200>;
-	};
-
-	i2c2_fck: i2c2_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_12m_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0200>;
-	};
-
-	vlynq_ick: vlynq_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0210>;
-	};
-
-	vlynq_gate_fck: vlynq_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0200>;
-	};
-
-	core_d18_ck: core_d18_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <18>;
-	};
-
-	vlynq_mux_fck: vlynq_mux_fck@240 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>;
-		ti,bit-shift = <15>;
-		reg = <0x0240>;
-	};
-
-	vlynq_fck: vlynq_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&vlynq_gate_fck>, <&vlynq_mux_fck>;
-	};
-};
-
-&prcm_clockdomains {
-	gfx_clkdm: gfx_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gfx_ick>;
-	};
-
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cam_fck>, <&vlynq_ick>, <&usb_fck>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
-			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
-			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>;
-	};
-
-	iva1_clkdm: iva1_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&iva1_mpu_int_ifck>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_ick>, <&dss_54m_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
-			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
-			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
-			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcspi1_ick>,
-			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
-			 <&uart1_ick>, <&uart1_fck>, <&uart2_ick>, <&uart2_fck>,
-			 <&uart3_ick>, <&uart3_fck>, <&cam_ick>,
-			 <&mailboxes_ick>, <&wdt4_ick>, <&wdt4_fck>,
-			 <&wdt3_ick>, <&wdt3_fck>, <&mspro_ick>, <&mspro_fck>,
-			 <&mmc_ick>, <&mmc_fck>, <&fac_ick>, <&fac_fck>,
-			 <&eac_ick>, <&eac_fck>, <&hdq_ick>, <&hdq_fck>,
-			 <&i2c1_ick>, <&i2c1_fck>, <&i2c2_ick>, <&i2c2_fck>,
-			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
-			 <&pka_ick>;
-	};
-};
-
-&func_96m_ck {
-	compatible = "fixed-factor-clock";
-	clocks = <&apll96_ck>;
-	clock-mult = <1>;
-	clock-div = <1>;
-};
-
-&dsp_div_fck {
-	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
-};
-
-&ssi_ssr_sst_div_fck {
-	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-};
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
deleted file mode 100644
index 5acf5dd87c593..0000000000000
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap2420.dtsi"
-
-/ {
-	model = "TI OMAP2420 H4 board";
-	compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x4000000>; /* 64 MB */
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x08000000 0x04000000>;
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		linux,mtd-name = "intel,ge28f256l18b85";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x04000000>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <10>;
-		gpmc,cs-rd-off-ns = <160>;
-		gpmc,cs-wr-off-ns = <160>;
-		gpmc,adv-on-ns = <20>;
-		gpmc,adv-rd-off-ns = <50>;
-		gpmc,adv-wr-off-ns = <50>;
-		gpmc,oe-on-ns = <60>;
-		gpmc,oe-off-ns = <120>;
-		gpmc,we-on-ns = <60>;
-		gpmc,we-off-ns = <120>;
-		gpmc,rd-cycle-ns = <170>;
-		gpmc,wr-cycle-ns = <170>;
-		gpmc,access-ns = <150>;
-		gpmc,page-burst-access-ns = <10>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0 0x20000>;
-		};
-		partition@20000 {
-			label = "params";
-			reg = <0x20000 0x20000>;
-		};
-		partition@40000 {
-			label = "kernel";
-			reg = <0x40000 0x200000>;
-		};
-		partition@240000 {
-			label = "file-system";
-			reg = <0x240000 0x3dc0000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap2420-n800.dts b/arch/arm/boot/dts/omap2420-n800.dts
deleted file mode 100644
index f06d767e818b0..0000000000000
--- a/arch/arm/boot/dts/omap2420-n800.dts
+++ /dev/null
@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "omap2420-n8x0-common.dtsi"
-
-/ {
-	model = "Nokia N800";
-	compatible = "nokia,n800", "nokia,n8x0", "ti,omap2420", "ti,omap2";
-};
diff --git a/arch/arm/boot/dts/omap2420-n810-wimax.dts b/arch/arm/boot/dts/omap2420-n810-wimax.dts
deleted file mode 100644
index ac9acbd609b69..0000000000000
--- a/arch/arm/boot/dts/omap2420-n810-wimax.dts
+++ /dev/null
@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "omap2420-n8x0-common.dtsi"
-
-/ {
-	model = "Nokia N810 WiMax";
-	compatible = "nokia,n810-wimax", "nokia,n8x0", "ti,omap2420", "ti,omap2";
-};
diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts
deleted file mode 100644
index 09c1dbc0bb690..0000000000000
--- a/arch/arm/boot/dts/omap2420-n810.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "omap2420-n8x0-common.dtsi"
-
-/ {
-	model = "Nokia N810";
-	compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
-
-	vio_ape: vio_ape {
-		compatible = "regulator-fixed";
-		regulator-name = "vio_ape";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	v28_aic: v28_aic {
-		compatible = "regulator-fixed";
-		regulator-name = "v28_aic";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-	};
-};
-
-&omap2420_pmx {
-	mcbsp2_pins: mcbsp2_pins {
-		pinctrl-single,pins = <
-			OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1)	/* eac_ac_sclk.mcbsp2_clkx */
-			OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1)	/* eac_ac_fs.mcbsp2_fsx */
-			OMAP2420_CORE_IOPAD(0x0126, PIN_INPUT | MUX_MODE1)	/* eac_ac_din.mcbsp2_dr */
-			OMAP2420_CORE_IOPAD(0x0127, PIN_OUTPUT | MUX_MODE1)	/* eac_ac_dout.mcbsp2_dx */
-		>;
-	};
-
-	aic33_pins: aic33_pins {
-		pinctrl-single,pins = <
-			OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3)	/* eac_ac_rst.gpio118 */
-			OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2)	/* vlynq_tx1.sys_clkout2 */
-		>;
-	};
-};
-
-&i2c2 {
-	aic33@18 {
-		compatible = "ti,tlv320aic33";
-		reg = <0x18>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&aic33_pins>;
-
-		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
-
-		ai3x-gpio-func = <
-			10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */
-			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
-		>;
-		ai3x-micbias-vg = <1>; /* 2V */
-
-		AVDD-supply = <&v28_aic>;
-		DRVDD-supply = <&v28_aic>;
-		IOVDD-supply = <&vio_ape>;
-		DVDD-supply = <&vio_ape>;
-
-		assigned-clocks = <&sys_clkout2_src>, <&sys_clkout2>;
-		assigned-clock-parents = <&func_96m_ck>;
-		assigned-clock-rates = <0>, <12000000>;
-	};
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
deleted file mode 100644
index 63b0b4921e4e4..0000000000000
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "omap2420.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128 MB */
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	ocp {
-		i2c0 {
-			compatible = "i2c-cbus-gpio";
-			gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */
-				 &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */
-				 &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */
-				>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			retu: retu@1 {
-				compatible = "nokia,retu";
-				interrupt-parent = <&gpio4>;
-				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-				reg = <0x1>;
-			};
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-
-	pmic@72 {
-		compatible = "menelaus";
-		reg = <0x72>;
-		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&gpmc {
-	ranges = <0 0 0x04000000 0x1000000>;	/* CS0: 16MB for OneNAND */
-
-	/* gpio-irq for dma: 26 */
-
-	onenand@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "ti,omap2-onenand";
-		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
-
-		gpmc,sync-read;
-		gpmc,burst-length = <16>;
-		gpmc,burst-read;
-		gpmc,burst-wrap;
-		gpmc,device-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <127>;
-		gpmc,cs-wr-off-ns = <109>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-wr-off-ns = <18>;
-		gpmc,oe-on-ns = <27>;
-		gpmc,oe-off-ns = <127>;
-		gpmc,we-on-ns = <27>;
-		gpmc,we-off-ns = <72>;
-		gpmc,rd-cycle-ns = <145>;
-		gpmc,wr-cycle-ns = <136>;
-		gpmc,access-ns = <118>;
-		gpmc,page-burst-access-ns = <27>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <9>;
-		gpmc,sync-clk-ps = <27000>;
-
-		/* MTD partition table corresponding to old board-n8x0 file. */
-		partition@0 {
-			label = "bootloader";
-			reg = <0x00000000 0x00020000>;
-			read-only;
-		};
-		partition@1 {
-			label = "config";
-			reg = <0x00020000 0x00060000>;
-		};
-		partition@2 {
-			label = "kernel";
-			reg = <0x00080000 0x00200000>;
-		};
-		partition@3 {
-			label = "initfs";
-			reg = <0x00280000 0x00400000>;
-		};
-		partition@4 {
-			label = "rootfs";
-			reg = <0x00680000 0x0f980000>;
-		};
-		partition@5 {
-			label = "omap2-onenand";
-			reg = <0x00000000 0x10000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
deleted file mode 100644
index 821da51cb8704..0000000000000
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ /dev/null
@@ -1,262 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP2420 SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "omap2.dtsi"
-
-/ {
-	compatible = "ti,omap2420", "ti,omap2";
-
-	ocp {
-		l4: l4@48000000 {
-			compatible = "ti,omap2-l4", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48000000 0x100000>;
-
-			prcm: prcm@8000 {
-				compatible = "ti,omap2-prcm";
-				reg = <0x8000 0x1000>;
-
-				prcm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prcm_clockdomains: clockdomains {
-				};
-			};
-
-			scm: scm@0 {
-				compatible = "ti,omap2-scm", "simple-bus";
-				reg = <0x0 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#pinctrl-cells = <1>;
-				ranges = <0 0x0 0x1000>;
-
-				omap2420_pmx: pinmux@30 {
-					compatible = "ti,omap2420-padconf",
-						     "pinctrl-single";
-					reg = <0x30 0x0113>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					pinctrl-single,register-width = <8>;
-					pinctrl-single,function-mask = <0x3f>;
-				};
-
-				scm_conf: scm_conf@270 {
-					compatible = "syscon";
-					reg = <0x270 0x100>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					scm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				scm_clockdomains: clockdomains {
-				};
-			};
-
-			target-module@4000 {
-				compatible = "ti,sysc-omap2", "ti,sysc";
-				reg = <0x4000 0x4>,
-				      <0x4004 0x4>;
-				reg-names = "rev", "sysc";
-				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-						<SYSC_IDLE_NO>;
-				clocks = <&func_32k_ck>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x4000 0x1000>;
-
-				counter32k: counter@0 {
-					compatible = "ti,omap-counter32k";
-					reg = <0 0x20>;
-				};
-			};
-		};
-
-		gpio1: gpio@48018000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x48018000 0x200>;
-			interrupts = <29>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio2: gpio@4801a000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4801a000 0x200>;
-			interrupts = <30>;
-			ti,hwmods = "gpio2";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio3: gpio@4801c000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4801c000 0x200>;
-			interrupts = <31>;
-			ti,hwmods = "gpio3";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio4: gpio@4801e000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4801e000 0x200>;
-			interrupts = <32>;
-			ti,hwmods = "gpio4";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpmc: gpmc@6800a000 {
-			compatible = "ti,omap2420-gpmc";
-			reg = <0x6800a000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <20>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			ti,hwmods = "gpmc";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		mcbsp1: mcbsp@48074000 {
-			compatible = "ti,omap2420-mcbsp";
-			reg = <0x48074000 0xff>;
-			reg-names = "mpu";
-			interrupts = <59>, /* TX interrupt */
-				     <60>; /* RX interrupt */
-			interrupt-names = "tx", "rx";
-			ti,hwmods = "mcbsp1";
-			dmas = <&sdma 31>,
-			       <&sdma 32>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp2: mcbsp@48076000 {
-			compatible = "ti,omap2420-mcbsp";
-			reg = <0x48076000 0xff>;
-			reg-names = "mpu";
-			interrupts = <62>, /* TX interrupt */
-				     <63>; /* RX interrupt */
-			interrupt-names = "tx", "rx";
-			ti,hwmods = "mcbsp2";
-			dmas = <&sdma 33>,
-			       <&sdma 34>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		msdi1: mmc@4809c000 {
-			compatible = "ti,omap2420-mmc";
-			ti,hwmods = "msdi1";
-			reg = <0x4809c000 0x80>;
-			interrupts = <83>;
-			dmas = <&sdma 61 &sdma 62>;
-			dma-names = "tx", "rx";
-		};
-
-		mailbox: mailbox@48094000 {
-			compatible = "ti,omap2-mailbox";
-			reg = <0x48094000 0x200>;
-			interrupts = <26>, <34>;
-			ti,hwmods = "mailbox";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <6>;
-			mbox_dsp: mbox-dsp {
-				ti,mbox-tx = <0 0 0>;
-				ti,mbox-rx = <1 0 0>;
-			};
-			mbox_iva: mbox-iva {
-				ti,mbox-tx = <2 1 3>;
-				ti,mbox-rx = <3 1 3>;
-			};
-		};
-
-		timer1_target: target-module@48028000 {
-			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			reg = <0x48028000 0x4>,
-			      <0x48028010 0x4>,
-			      <0x48028014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&gpt1_fck>, <&gpt1_ick>;
-			clock-names = "fck", "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48028000 0x1000>;
-
-			timer1: timer@0 {
-				compatible = "ti,omap2420-timer";
-				reg = <0 0x400>;
-				interrupts = <37>;
-				ti,timer-alwon;
-			};
-		};
-
-		wd_timer2: wdt@48022000 {
-			compatible = "ti,omap2-wdt";
-			ti,hwmods = "wd_timer2";
-			reg = <0x48022000 0x80>;
-		};
-	};
-};
-
-&i2c1 {
-	compatible = "ti,omap2420-i2c";
-};
-
-&i2c2 {
-	compatible = "ti,omap2420-i2c";
-};
-
-#include "omap24xx-clocks.dtsi"
-#include "omap2420-clocks.dtsi"
-
-/* Preferred always-on timer for clockevent */
-&timer1_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt1_fck>;
-		assigned-clock-parents = <&func_32k_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi
deleted file mode 100644
index 4e5ab51894760..0000000000000
--- a/arch/arm/boot/dts/omap2430-clocks.dtsi
+++ /dev/null
@@ -1,341 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP2430 clock data
- *
- * Copyright (C) 2014 Texas Instruments, Inc.
- */
-
-&scm_clocks {
-	mcbsp3_mux_fck: mcbsp3_mux_fck@78 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		reg = <0x78>;
-	};
-
-	mcbsp3_fck: mcbsp3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
-	};
-
-	mcbsp4_mux_fck: mcbsp4_mux_fck@78 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x78>;
-	};
-
-	mcbsp4_fck: mcbsp4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
-	};
-
-	mcbsp5_mux_fck: mcbsp5_mux_fck@78 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		ti,bit-shift = <4>;
-		reg = <0x78>;
-	};
-
-	mcbsp5_fck: mcbsp5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
-	};
-};
-
-&prcm_clocks {
-	iva2_1_gate_ick: iva2_1_gate_ick@800 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&dsp_fck>;
-		ti,bit-shift = <0>;
-		reg = <0x0800>;
-	};
-
-	iva2_1_div_ick: iva2_1_div_ick@840 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&dsp_fck>;
-		ti,bit-shift = <5>;
-		ti,max-div = <3>;
-		reg = <0x0840>;
-		ti,index-starts-at-one;
-	};
-
-	iva2_1_ick: iva2_1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>;
-	};
-
-	mdm_gate_ick: mdm_gate_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0c10>;
-	};
-
-	mdm_div_ick: mdm_div_ick@c40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_ck>;
-		reg = <0x0c40>;
-		ti,dividers = <0>, <1>, <0>, <0>, <4>, <0>, <6>, <0>, <0>, <9>;
-	};
-
-	mdm_ick: mdm_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mdm_gate_ick>, <&mdm_div_ick>;
-	};
-
-	mdm_osc_ck: mdm_osc_ck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&osc_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0c00>;
-	};
-
-	mcbsp3_ick: mcbsp3_ick@214 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0214>;
-	};
-
-	mcbsp3_gate_fck: mcbsp3_gate_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <3>;
-		reg = <0x0204>;
-	};
-
-	mcbsp4_ick: mcbsp4_ick@214 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0214>;
-	};
-
-	mcbsp4_gate_fck: mcbsp4_gate_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <4>;
-		reg = <0x0204>;
-	};
-
-	mcbsp5_ick: mcbsp5_ick@214 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0214>;
-	};
-
-	mcbsp5_gate_fck: mcbsp5_gate_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <5>;
-		reg = <0x0204>;
-	};
-
-	mcspi3_ick: mcspi3_ick@214 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0214>;
-	};
-
-	mcspi3_fck: mcspi3_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0204>;
-	};
-
-	icr_ick: icr_ick@410 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0410>;
-	};
-
-	i2chs1_fck: i2chs1_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,omap2430-interface-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0204>;
-	};
-
-	i2chs2_fck: i2chs2_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,omap2430-interface-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0204>;
-	};
-
-	usbhs_ick: usbhs_ick@214 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0214>;
-	};
-
-	mmchs1_ick: mmchs1_ick@214 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0214>;
-	};
-
-	mmchs1_fck: mmchs1_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0204>;
-	};
-
-	mmchs2_ick: mmchs2_ick@214 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0214>;
-	};
-
-	mmchs2_fck: mmchs2_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0204>;
-	};
-
-	gpio5_ick: gpio5_ick@214 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0214>;
-	};
-
-	gpio5_fck: gpio5_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0204>;
-	};
-
-	mdm_intc_ick: mdm_intc_ick@214 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0214>;
-	};
-
-	mmchsdb1_fck: mmchsdb1_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <16>;
-		reg = <0x0204>;
-	};
-
-	mmchsdb2_fck: mmchsdb2_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <17>;
-		reg = <0x0204>;
-	};
-};
-
-&prcm_clockdomains {
-	gfx_clkdm: gfx_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gfx_ick>;
-	};
-
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cam_fck>, <&usb_fck>, <&usbhs_ick>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
-			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
-			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>,
-			 <&icr_ick>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_ick>, <&dss_54m_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
-			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
-			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
-			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
-			 <&mcbsp4_ick>, <&mcbsp5_ick>, <&mcspi1_ick>,
-			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
-			 <&mcspi3_ick>, <&mcspi3_fck>, <&uart1_ick>,
-			 <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, <&uart3_ick>,
-			 <&uart3_fck>, <&cam_ick>, <&mailboxes_ick>,
-			 <&wdt4_ick>, <&wdt4_fck>, <&mspro_ick>, <&mspro_fck>,
-			 <&fac_ick>, <&fac_fck>, <&hdq_ick>, <&hdq_fck>,
-			 <&i2c1_ick>, <&i2chs1_fck>, <&i2c2_ick>, <&i2chs2_fck>,
-			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
-			 <&pka_ick>, <&mmchs1_ick>, <&mmchs1_fck>,
-			 <&mmchs2_ick>, <&mmchs2_fck>, <&gpio5_ick>,
-			 <&gpio5_fck>, <&mdm_intc_ick>, <&mmchsdb1_fck>,
-			 <&mmchsdb2_fck>;
-	};
-
-	mdm_clkdm: mdm_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mdm_osc_ck>;
-	};
-};
-
-&func_96m_ck {
-	compatible = "ti,mux-clock";
-	clocks = <&apll96_ck>, <&alt_ck>;
-	ti,bit-shift = <4>;
-	reg = <0x0540>;
-};
-
-&dsp_div_fck {
-	ti,max-div = <4>;
-	ti,index-starts-at-one;
-};
-
-&ssi_ssr_sst_div_fck {
-	ti,max-div = <5>;
-	ti,index-starts-at-one;
-};
diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts
deleted file mode 100644
index 207070677e3ae..0000000000000
--- a/arch/arm/boot/dts/omap2430-sdp.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap2430.dtsi"
-
-/ {
-	model = "TI OMAP2430 SDP";
-	compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128 MB */
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-	};
-};
-
-#include "twl4030.dtsi"
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-};
-
-&gpmc {
-	ranges = <5 0 0x08000000 0x01000000>;
-	ethernet@gpmc {
-		compatible = "smsc,lan91c94";
-		interrupt-parent = <&gpio5>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;	/* gpio149 */
-		reg = <5 0x300 0xf>;
-		bank-width = <2>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,mux-add-data = <2>;
-		gpmc,device-width = <1>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		gpmc,cs-on-ns = <6>;
-		gpmc,cs-rd-off-ns = <187>;
-		gpmc,cs-wr-off-ns = <187>;
-		gpmc,adv-on-ns = <18>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <60>;
-		gpmc,oe-off-ns = <169>;
-		gpmc,we-on-ns = <66>;
-		gpmc,we-off-ns = <169>;
-		gpmc,rd-cycle-ns = <187>;
-		gpmc,wr-cycle-ns = <187>;
-		gpmc,access-ns = <187>;
-		gpmc,page-burst-access-ns = <24>;
-		gpmc,bus-turnaround-ns = <24>;
-		gpmc,cycle2cycle-delay-ns = <24>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,wr-access-ns = <0>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
deleted file mode 100644
index b9a9e6e45266f..0000000000000
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ /dev/null
@@ -1,366 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP243x SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "omap2.dtsi"
-
-/ {
-	compatible = "ti,omap2430", "ti,omap2";
-
-	ocp {
-		l4_wkup: l4_wkup@49000000 {
-			compatible = "ti,omap2-l4-wkup", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x49000000 0x31000>;
-
-			prcm: prcm@6000 {
-				compatible = "ti,omap2-prcm";
-				reg = <0x6000 0x1000>;
-
-				prcm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prcm_clockdomains: clockdomains {
-				};
-			};
-
-			scm: scm@2000 {
-				compatible = "ti,omap2-scm", "simple-bus";
-				reg = <0x2000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#pinctrl-cells = <1>;
-				ranges = <0 0x2000 0x1000>;
-
-				omap2430_pmx: pinmux@30 {
-					compatible = "ti,omap2430-padconf",
-						     "pinctrl-single";
-					reg = <0x30 0x0154>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					pinctrl-single,register-width = <8>;
-					pinctrl-single,function-mask = <0x3f>;
-				};
-
-				scm_conf: scm_conf@270 {
-					compatible = "syscon",
-						     "simple-bus";
-					reg = <0x270 0x240>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x270 0x240>;
-
-					scm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-
-					pbias_regulator: pbias_regulator@230 {
-						compatible = "ti,pbias-omap2", "ti,pbias-omap";
-						reg = <0x230 0x4>;
-						syscon = <&scm_conf>;
-						pbias_mmc_reg: pbias_mmc_omap2430 {
-							regulator-name = "pbias_mmc_omap2430";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3000000>;
-						};
-					};
-				};
-
-				scm_clockdomains: clockdomains {
-				};
-			};
-
-			target-module@20000 {
-				compatible = "ti,sysc-omap2", "ti,sysc";
-				reg = <0x20000 0x4>,
-				      <0x20004 0x4>;
-				reg-names = "rev", "sysc";
-				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-						<SYSC_IDLE_NO>;
-				clocks = <&func_32k_ck>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x20000 0x1000>;
-
-				counter32k: counter@0 {
-					compatible = "ti,omap-counter32k";
-					reg = <0 0x20>;
-				};
-			};
-		};
-
-		gpio1: gpio@4900c000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4900c000 0x200>;
-			interrupts = <29>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio2: gpio@4900e000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4900e000 0x200>;
-			interrupts = <30>;
-			ti,hwmods = "gpio2";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio3: gpio@49010000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x49010000 0x200>;
-			interrupts = <31>;
-			ti,hwmods = "gpio3";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio4: gpio@49012000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x49012000 0x200>;
-			interrupts = <32>;
-			ti,hwmods = "gpio4";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio5: gpio@480b6000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x480b6000 0x200>;
-			interrupts = <33>;
-			ti,hwmods = "gpio5";
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpmc: gpmc@6e000000 {
-			compatible = "ti,omap2430-gpmc";
-			reg = <0x6e000000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <20>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			ti,hwmods = "gpmc";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		mcbsp1: mcbsp@48074000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x48074000 0xff>;
-			reg-names = "mpu";
-			interrupts = <64>, /* OCP compliant interrupt */
-				     <59>, /* TX interrupt */
-				     <60>, /* RX interrupt */
-				     <61>; /* RX overflow interrupt */
-			interrupt-names = "common", "tx", "rx", "rx_overflow";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp1";
-			dmas = <&sdma 31>,
-			       <&sdma 32>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp2: mcbsp@48076000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x48076000 0xff>;
-			reg-names = "mpu";
-			interrupts = <16>, /* OCP compliant interrupt */
-				     <62>, /* TX interrupt */
-				     <63>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp2";
-			dmas = <&sdma 33>,
-			       <&sdma 34>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp3: mcbsp@4808c000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x4808c000 0xff>;
-			reg-names = "mpu";
-			interrupts = <17>, /* OCP compliant interrupt */
-				     <89>, /* TX interrupt */
-				     <90>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp3";
-			dmas = <&sdma 17>,
-			       <&sdma 18>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp4: mcbsp@4808e000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x4808e000 0xff>;
-			reg-names = "mpu";
-			interrupts = <18>, /* OCP compliant interrupt */
-				     <54>, /* TX interrupt */
-				     <55>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp4";
-			dmas = <&sdma 19>,
-			       <&sdma 20>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp5: mcbsp@48096000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x48096000 0xff>;
-			reg-names = "mpu";
-			interrupts = <19>, /* OCP compliant interrupt */
-				     <81>, /* TX interrupt */
-				     <82>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp5";
-			dmas = <&sdma 21>,
-			       <&sdma 22>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap2-hsmmc";
-			reg = <0x4809c000 0x200>;
-			interrupts = <83>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap2-hsmmc";
-			reg = <0x480b4000 0x200>;
-			interrupts = <86>;
-			ti,hwmods = "mmc2";
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-		};
-
-		mailbox: mailbox@48094000 {
-			compatible = "ti,omap2-mailbox";
-			reg = <0x48094000 0x200>;
-			interrupts = <26>;
-			ti,hwmods = "mailbox";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <6>;
-			mbox_dsp: mbox-dsp {
-				ti,mbox-tx = <0 0 0>;
-				ti,mbox-rx = <1 0 0>;
-			};
-		};
-
-		timer1_target: target-module@49018000 {
-			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			reg = <0x49018000 0x4>,
-			      <0x49018010 0x4>,
-			      <0x49018014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&gpt1_fck>, <&gpt1_ick>;
-			clock-names = "fck", "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49018000 0x1000>;
-
-			timer1: timer@0 {
-				compatible = "ti,omap2420-timer";
-				reg = <0 0x400>;
-				interrupts = <37>;
-				ti,timer-alwon;
-			};
-		};
-
-		mcspi3: spi@480b8000 {
-			compatible = "ti,omap2-mcspi";
-			ti,hwmods = "mcspi3";
-			reg = <0x480b8000 0x100>;
-			interrupts = <91>;
-			dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		usb_otg_hs: usb_otg_hs@480ac000 {
-			compatible = "ti,omap2-musb";
-			ti,hwmods = "usb_otg_hs";
-			reg = <0x480ac000 0x1000>;
-			interrupts = <93>;
-		};
-
-		wd_timer2: wdt@49016000 {
-			compatible = "ti,omap2-wdt";
-			ti,hwmods = "wd_timer2";
-			reg = <0x49016000 0x80>;
-		};
-	};
-};
-
-&sdma {
-	compatible = "ti,omap2430-sdma", "ti,omap-sdma";
-};
-
-&i2c1 {
-	compatible = "ti,omap2430-i2c";
-};
-
-&i2c2 {
-	compatible = "ti,omap2430-i2c";
-};
-
-#include "omap24xx-clocks.dtsi"
-#include "omap2430-clocks.dtsi"
-
-/* Preferred always-on timer for clockevent */
-&timer1_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt1_fck>;
-		assigned-clock-parents = <&func_32k_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi
deleted file mode 100644
index 07af87edf0e2e..0000000000000
--- a/arch/arm/boot/dts/omap24xx-clocks.dtsi
+++ /dev/null
@@ -1,1241 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP24xx clock data
- *
- * Copyright (C) 2014 Texas Instruments, Inc.
- */
-&scm_clocks {
-	mcbsp1_mux_fck: mcbsp1_mux_fck@4 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x4>;
-	};
-
-	mcbsp1_fck: mcbsp1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
-	};
-
-	mcbsp2_mux_fck: mcbsp2_mux_fck@4 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		ti,bit-shift = <6>;
-		reg = <0x4>;
-	};
-
-	mcbsp2_fck: mcbsp2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
-	};
-};
-
-&prcm_clocks {
-	func_32k_ck: func_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	secure_32k_ck: secure_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_12m_ck: virt_12m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13m_ck: virt_13m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_26m_ck: virt_26m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	aplls_clkin_ck: aplls_clkin_ck@540 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x0540>;
-	};
-
-	aplls_clkin_x2_ck: aplls_clkin_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&aplls_clkin_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	osc_ck: osc_ck@60 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0060>;
-		ti,index-starts-at-one;
-	};
-
-	sys_ck: sys_ck@60 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&osc_ck>;
-		ti,bit-shift = <6>;
-		ti,max-div = <3>;
-		reg = <0x0060>;
-		ti,index-starts-at-one;
-	};
-
-	alt_ck: alt_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <54000000>;
-	};
-
-	mcbsp_clks: mcbsp_clks {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	dpll_ck: dpll_ck@500 {
-		#clock-cells = <0>;
-		compatible = "ti,omap2-dpll-core-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0500>, <0x0540>;
-	};
-
-	apll96_ck: apll96_ck@500 {
-		#clock-cells = <0>;
-		compatible = "ti,omap2-apll-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <2>;
-		ti,idlest-shift = <8>;
-		ti,clock-frequency = <96000000>;
-		reg = <0x0500>, <0x0530>, <0x0520>;
-	};
-
-	apll54_ck: apll54_ck@500 {
-		#clock-cells = <0>;
-		compatible = "ti,omap2-apll-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <6>;
-		ti,idlest-shift = <9>;
-		ti,clock-frequency = <54000000>;
-		reg = <0x0500>, <0x0530>, <0x0520>;
-	};
-
-	func_54m_ck: func_54m_ck@540 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&apll54_ck>, <&alt_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0540>;
-	};
-
-	core_ck: core_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	func_96m_ck: func_96m_ck@540 {
-		#clock-cells = <0>;
-	};
-
-	apll96_d2_ck: apll96_d2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll96_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	func_48m_ck: func_48m_ck@540 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&apll96_d2_ck>, <&alt_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0540>;
-	};
-
-	func_12m_ck: func_12m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&func_48m_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	sys_clkout_src_gate: sys_clkout_src_gate@70 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0070>;
-	};
-
-	sys_clkout_src_mux: sys_clkout_src_mux@70 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
-		reg = <0x0070>;
-	};
-
-	sys_clkout_src: sys_clkout_src {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>;
-	};
-
-	sys_clkout: sys_clkout@70 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkout_src>;
-		ti,bit-shift = <3>;
-		ti,max-div = <64>;
-		reg = <0x0070>;
-		ti,index-power-of-two;
-	};
-
-	emul_ck: emul_ck@78 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_54m_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0078>;
-	};
-
-	mpu_ck: mpu_ck@140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,max-div = <31>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-	};
-
-	dsp_gate_fck: dsp_gate_fck@800 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0800>;
-	};
-
-	dsp_div_fck: dsp_div_fck@840 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_ck>;
-		reg = <0x0840>;
-	};
-
-	dsp_fck: dsp_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dsp_gate_fck>, <&dsp_div_fck>;
-	};
-
-	core_l3_ck: core_l3_ck@240 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,max-div = <31>;
-		reg = <0x0240>;
-		ti,index-starts-at-one;
-	};
-
-	gfx_3d_gate_fck: gfx_3d_gate_fck@300 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0300>;
-	};
-
-	gfx_3d_div_fck: gfx_3d_div_fck@340 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_l3_ck>;
-		ti,max-div = <4>;
-		reg = <0x0340>;
-		ti,index-starts-at-one;
-	};
-
-	gfx_3d_fck: gfx_3d_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>;
-	};
-
-	gfx_2d_gate_fck: gfx_2d_gate_fck@300 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0300>;
-	};
-
-	gfx_2d_div_fck: gfx_2d_div_fck@340 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_l3_ck>;
-		ti,max-div = <4>;
-		reg = <0x0340>;
-		ti,index-starts-at-one;
-	};
-
-	gfx_2d_fck: gfx_2d_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>;
-	};
-
-	gfx_ick: gfx_ick@310 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0310>;
-	};
-
-	l4_ck: l4_ck@240 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <5>;
-		ti,max-div = <3>;
-		reg = <0x0240>;
-		ti,index-starts-at-one;
-	};
-
-	dss_ick: dss_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0210>;
-	};
-
-	dss1_gate_fck: dss1_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0200>;
-	};
-
-	core_d2_ck: core_d2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	core_d3_ck: core_d3_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	core_d4_ck: core_d4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	core_d5_ck: core_d5_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <5>;
-	};
-
-	core_d6_ck: core_d6_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <6>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	core_d8_ck: core_d8_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	core_d9_ck: core_d9_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <9>;
-	};
-
-	core_d12_ck: core_d12_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <12>;
-	};
-
-	core_d16_ck: core_d16_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	dss1_mux_fck: dss1_mux_fck@240 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0240>;
-	};
-
-	dss1_fck: dss1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dss1_gate_fck>, <&dss1_mux_fck>;
-	};
-
-	dss2_gate_fck: dss2_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0200>;
-	};
-
-	dss2_mux_fck: dss2_mux_fck@240 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_ck>, <&func_48m_ck>;
-		ti,bit-shift = <13>;
-		reg = <0x0240>;
-	};
-
-	dss2_fck: dss2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dss2_gate_fck>, <&dss2_mux_fck>;
-	};
-
-	dss_54m_fck: dss_54m_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_54m_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0200>;
-	};
-
-	ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0204>;
-	};
-
-	ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck@240 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0240>;
-	};
-
-	ssi_ssr_sst_fck: ssi_ssr_sst_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>;
-	};
-
-	usb_l4_gate_ick: usb_l4_gate_ick@214 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0214>;
-	};
-
-	usb_l4_div_ick: usb_l4_div_ick@240 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x0240>;
-		ti,dividers = <0>, <1>, <2>, <0>, <4>;
-	};
-
-	usb_l4_ick: usb_l4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
-	};
-
-	ssi_l4_ick: ssi_l4_ick@214 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0214>;
-	};
-
-	gpt1_ick: gpt1_ick@410 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0410>;
-	};
-
-	gpt1_gate_fck: gpt1_gate_fck@400 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0400>;
-	};
-
-	gpt1_mux_fck: gpt1_mux_fck@440 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		reg = <0x0440>;
-	};
-
-	gpt1_fck: gpt1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
-	};
-
-	gpt2_ick: gpt2_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0210>;
-	};
-
-	gpt2_gate_fck: gpt2_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0200>;
-	};
-
-	gpt2_mux_fck: gpt2_mux_fck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0244>;
-	};
-
-	gpt2_fck: gpt2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
-	};
-
-	gpt3_ick: gpt3_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0210>;
-	};
-
-	gpt3_gate_fck: gpt3_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0200>;
-	};
-
-	gpt3_mux_fck: gpt3_mux_fck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0244>;
-	};
-
-	gpt3_fck: gpt3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
-	};
-
-	gpt4_ick: gpt4_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0210>;
-	};
-
-	gpt4_gate_fck: gpt4_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0200>;
-	};
-
-	gpt4_mux_fck: gpt4_mux_fck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0244>;
-	};
-
-	gpt4_fck: gpt4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
-	};
-
-	gpt5_ick: gpt5_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0210>;
-	};
-
-	gpt5_gate_fck: gpt5_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0200>;
-	};
-
-	gpt5_mux_fck: gpt5_mux_fck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0244>;
-	};
-
-	gpt5_fck: gpt5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
-	};
-
-	gpt6_ick: gpt6_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0210>;
-	};
-
-	gpt6_gate_fck: gpt6_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0200>;
-	};
-
-	gpt6_mux_fck: gpt6_mux_fck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0244>;
-	};
-
-	gpt6_fck: gpt6_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
-	};
-
-	gpt7_ick: gpt7_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0210>;
-	};
-
-	gpt7_gate_fck: gpt7_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0200>;
-	};
-
-	gpt7_mux_fck: gpt7_mux_fck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0244>;
-	};
-
-	gpt7_fck: gpt7_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
-	};
-
-	gpt8_ick: gpt8_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0210>;
-	};
-
-	gpt8_gate_fck: gpt8_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0200>;
-	};
-
-	gpt8_mux_fck: gpt8_mux_fck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <14>;
-		reg = <0x0244>;
-	};
-
-	gpt8_fck: gpt8_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
-	};
-
-	gpt9_ick: gpt9_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0210>;
-	};
-
-	gpt9_gate_fck: gpt9_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0200>;
-	};
-
-	gpt9_mux_fck: gpt9_mux_fck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <16>;
-		reg = <0x0244>;
-	};
-
-	gpt9_fck: gpt9_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
-	};
-
-	gpt10_ick: gpt10_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0210>;
-	};
-
-	gpt10_gate_fck: gpt10_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0200>;
-	};
-
-	gpt10_mux_fck: gpt10_mux_fck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0244>;
-	};
-
-	gpt10_fck: gpt10_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
-	};
-
-	gpt11_ick: gpt11_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <13>;
-		reg = <0x0210>;
-	};
-
-	gpt11_gate_fck: gpt11_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <13>;
-		reg = <0x0200>;
-	};
-
-	gpt11_mux_fck: gpt11_mux_fck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0244>;
-	};
-
-	gpt11_fck: gpt11_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
-	};
-
-	gpt12_ick: gpt12_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <14>;
-		reg = <0x0210>;
-	};
-
-	gpt12_gate_fck: gpt12_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <14>;
-		reg = <0x0200>;
-	};
-
-	gpt12_mux_fck: gpt12_mux_fck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0244>;
-	};
-
-	gpt12_fck: gpt12_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>;
-	};
-
-	mcbsp1_ick: mcbsp1_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <15>;
-		reg = <0x0210>;
-	};
-
-	mcbsp1_gate_fck: mcbsp1_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <15>;
-		reg = <0x0200>;
-	};
-
-	mcbsp2_ick: mcbsp2_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <16>;
-		reg = <0x0210>;
-	};
-
-	mcbsp2_gate_fck: mcbsp2_gate_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <16>;
-		reg = <0x0200>;
-	};
-
-	mcspi1_ick: mcspi1_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <17>;
-		reg = <0x0210>;
-	};
-
-	mcspi1_fck: mcspi1_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <17>;
-		reg = <0x0200>;
-	};
-
-	mcspi2_ick: mcspi2_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0210>;
-	};
-
-	mcspi2_fck: mcspi2_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0200>;
-	};
-
-	uart1_ick: uart1_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <21>;
-		reg = <0x0210>;
-	};
-
-	uart1_fck: uart1_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <21>;
-		reg = <0x0200>;
-	};
-
-	uart2_ick: uart2_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0210>;
-	};
-
-	uart2_fck: uart2_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0200>;
-	};
-
-	uart3_ick: uart3_ick@214 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0214>;
-	};
-
-	uart3_fck: uart3_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0204>;
-	};
-
-	gpios_ick: gpios_ick@410 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0410>;
-	};
-
-	gpios_fck: gpios_fck@400 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0400>;
-	};
-
-	mpu_wdt_ick: mpu_wdt_ick@410 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0410>;
-	};
-
-	mpu_wdt_fck: mpu_wdt_fck@400 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0400>;
-	};
-
-	sync_32k_ick: sync_32k_ick@410 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0410>;
-	};
-
-	wdt1_ick: wdt1_ick@410 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0410>;
-	};
-
-	omapctrl_ick: omapctrl_ick@410 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0410>;
-	};
-
-	cam_fck: cam_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <31>;
-		reg = <0x0200>;
-	};
-
-	cam_ick: cam_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <31>;
-		reg = <0x0210>;
-	};
-
-	mailboxes_ick: mailboxes_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <30>;
-		reg = <0x0210>;
-	};
-
-	wdt4_ick: wdt4_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <29>;
-		reg = <0x0210>;
-	};
-
-	wdt4_fck: wdt4_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <29>;
-		reg = <0x0200>;
-	};
-
-	mspro_ick: mspro_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <27>;
-		reg = <0x0210>;
-	};
-
-	mspro_fck: mspro_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <27>;
-		reg = <0x0200>;
-	};
-
-	fac_ick: fac_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x0210>;
-	};
-
-	fac_fck: fac_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_12m_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x0200>;
-	};
-
-	hdq_ick: hdq_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x0210>;
-	};
-
-	hdq_fck: hdq_fck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_12m_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x0200>;
-	};
-
-	i2c1_ick: i2c1_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0210>;
-	};
-
-	i2c2_ick: i2c2_ick@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0210>;
-	};
-
-	gpmc_fck: gpmc_fck@238 {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&core_l3_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <1>;
-		reg = <0x0238>;
-		ti,clock-mult = <1>;
-	};
-
-	sdma_fck: sdma_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_l3_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sdma_ick: sdma_ick@238 {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&core_l3_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <0>;
-		reg = <0x0238>;
-		ti,clock-mult = <1>;
-	};
-
-	sdrc_ick: sdrc_ick@238 {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&core_l3_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <2>;
-		reg = <0x0238>;
-		ti,clock-mult = <1>;
-	};
-
-	des_ick: des_ick@21c {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x021c>;
-	};
-
-	sha_ick: sha_ick@21c {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x021c>;
-	};
-
-	rng_ick: rng_ick@21c {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x021c>;
-	};
-
-	aes_ick: aes_ick@21c {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x021c>;
-	};
-
-	pka_ick: pka_ick@21c {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x021c>;
-	};
-
-	usb_fck: usb_fck@204 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0204>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-beagle-ab4.dts b/arch/arm/boot/dts/omap3-beagle-ab4.dts
deleted file mode 100644
index 990ff2d846868..0000000000000
--- a/arch/arm/boot/dts/omap3-beagle-ab4.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include "omap3-beagle.dts"
-
-/ {
-	model = "TI OMAP3 BeagleBoard A to B4";
-	compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
-};
-
-/*
- * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
- * section at https://elinux.org/BeagleBoard_Community
- */
-
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because of unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts
deleted file mode 100644
index cb6968a8bce8e..0000000000000
--- a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "omap3-beagle-xm.dts"
-
-/ {
-	/* HS USB Port 2 Power enable was inverted with the xM C */
-	hsusb2_power: hsusb2_power_reg {
-		enable-active-high;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
deleted file mode 100644
index 1a085bc013177..0000000000000
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ /dev/null
@@ -1,419 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-
-/ {
-	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	aliases {
-		display0 = &dvi0;
-		display1 = &tv0;
-		ethernet = &ethernet;
-	};
-
-	/* fixed 26MHz oscillator */
-	hfclk_26m: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	led-controller-1 {
-		compatible = "gpio-leds";
-
-		led-1 {
-			label = "beagleboard::usr0";
-			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-2 {
-			label = "beagleboard::usr1";
-			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	led-controller-2 {
-		compatible = "pwm-leds";
-
-		led-3 {
-			label = "beagleboard::pmu_stat";
-			pwms = <&twl_pwmled 1 7812500>;
-			max-brightness = <127>;
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "omap3beagle";
-
-		ti,mcbsp = <&mcbsp2>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		user {
-			label = "user";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x114>;
-			wakeup-source;
-		};
-
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
-		vcc-supply = <&hsusb2_power>;
-		#phy-cells = <0>;
-	};
-
-	tfp410: encoder0 {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
-
-		/* XXX pinctrl from twl */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	tv0: connector1 {
-		compatible = "svideo-connector";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-	};
-
-	etb@5401b000 {
-		compatible = "arm,coresight-etb10", "arm,primecell";
-		reg = <0x5401b000 0x1000>;
-
-		clocks = <&emu_src_ck>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etb_in: endpoint {
-					remote-endpoint = <&etm_out>;
-				};
-			};
-		};
-	};
-
-	etm@54010000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0x54010000 0x1000>;
-
-		clocks = <&emu_src_ck>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				etm_out: endpoint {
-					remote-endpoint = <&etb_in>;
-				};
-			};
-		};
-	};
-};
-
-&omap3_pmx_wkup {
-	gpio1_pins: pinmux_gpio1_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
-		>;
-	};
-
-	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_pins
-	>;
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
-		>;
-	};
-
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
-		>;
-	};
-
-	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		clocks = <&hfclk_26m>;
-		clock-names = "fck";
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-
-		twl_power: power {
-			compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
-			ti,use_poweroff;
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vqmmc-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&twl_gpio {
-	ti,use-leds;
-	/* pullups: BIT(1) */
-	ti,pullups = <0x000002>;
-	/*
-	 * pulldowns:
-	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
-	 * BIT(15), BIT(16), BIT(17)
-	 */
-	ti,pulldowns = <0x03a1c4>;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio1_pins>;
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hub@2 {
-		compatible = "usb424,9514";
-		reg = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethernet: ethernet@1 {
-			compatible = "usb424,ec00";
-			reg = <1>;
-		};
-	};
-};
-
-&vaux2 {
-	regulator-name = "usb_1v8";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&dss_dpi_pins1
-		&dss_dpi_pins2
-	>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&venc {
-	status = "okay";
-
-	vdda-supply = <&vdac>;
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&tv_connector_in>;
-			ti,channels = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
deleted file mode 100644
index 47ff1ffddfc52..0000000000000
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ /dev/null
@@ -1,436 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-
-/ {
-	model = "TI OMAP3 BeagleBoard";
-	compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	aliases {
-		display0 = &dvi0;
-		display1 = &tv0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-pmu-stat {
-			label = "beagleboard::pmu_stat";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
-		};
-
-		led-heartbeat {
-			label = "beagleboard::usr0";
-			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-mmc {
-			label = "beagleboard::usr1";
-			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;	/* gpio_147 */
-		vcc-supply = <&hsusb2_power>;
-		#phy-cells = <0>;
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "omap3beagle";
-
-		ti,mcbsp = <&mcbsp2>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		user {
-			label = "user";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x114>;
-			wakeup-source;
-		};
-
-	};
-
-	tfp410: encoder0 {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;	/* gpio_170 */
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tfp410_pins>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	tv0: connector1 {
-		compatible = "svideo-connector";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-	};
-
-	etb@540000000 {
-		compatible = "arm,coresight-etb10", "arm,primecell";
-		reg = <0x5401b000 0x1000>;
-
-		clocks = <&emu_src_ck>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etb_in: endpoint {
-					remote-endpoint = <&etm_out>;
-				};
-			};
-		};
-	};
-
-	etm@54010000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0x54010000 0x1000>;
-
-		clocks = <&emu_src_ck>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				etm_out: endpoint {
-					remote-endpoint = <&etb_in>;
-				};
-			};
-		};
-	};
-};
-
-&omap3_pmx_wkup {
-	gpio1_pins: pinmux_gpio1_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_pins
-	>;
-
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	tfp410_pins: pinmux_tfp410_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c3 {
-	clock-frequency = <100000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vqmmc-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&twl_gpio {
-	ti,use-leds;
-	/* pullups: BIT(1) */
-	ti,pullups = <0x000002>;
-	/*
-	 * pulldowns:
-	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
-	 * BIT(15), BIT(16), BIT(17)
-	 */
-	ti,pulldowns = <0x03a1c4>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio1_pins>;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&vaux2 {
-	regulator-name = "vdd_ehci";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&venc {
-	status = "okay";
-
-	vdda-supply = <&vdac>;
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&tv_connector_in>;
-			ti,channels = <2>;
-		};
-	};
-};
-
-&gpmc {
-	status = "okay";
-	ranges = <0 0 0x30000000 0x1000000>;	/* CS0 space, 16MB */
-
-	/* Chip select 0 */
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>;		/* NAND I/O window, 4 bytes */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		ti,nand-ecc-opt = "ham1";
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		nand-bus-width = <16>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		gpmc,device-width = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <36>;
-		gpmc,cs-wr-off-ns = <36>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <24>;
-		gpmc,adv-wr-off-ns = <36>;
-		gpmc,oe-on-ns = <6>;
-		gpmc,oe-off-ns = <48>;
-		gpmc,we-on-ns = <6>;
-		gpmc,we-off-ns = <30>;
-		gpmc,rd-cycle-ns = <72>;
-		gpmc,wr-cycle-ns = <72>;
-		gpmc,access-ns = <54>;
-		gpmc,wr-access-ns = <30>;
-
-		partition@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1e0000>;
-		};
-		partition@1c0000 {
-			label = "U-Boot Env";
-			reg = <0x260000 0x20000>;
-		};
-		partition@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x400000>;
-		};
-		partition@780000 {
-			label = "Filesystem";
-			reg = <0x680000 0xf980000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
deleted file mode 100644
index f25c0a84a190c..0000000000000
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Support for CompuLab CM-T3517
- */
-/dts-v1/;
-
-#include "am3517.dtsi"
-#include "omap3-cm-t3x.dtsi"
-
-/ {
-	model = "CompuLab CM-T3517";
-	compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
-
-	vmmc: regulator-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	wl12xx_vmmc2: wl12xx_vmmc2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vw1271";
-		pinctrl-names = "default";
-		pinctrl-0 = <
-				&wl12xx_wkup_pins
-				&wl12xx_core_pins
-			    >;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH >; /* gpio6 */
-		startup-delay-us = <20000>;
-		enable-active-high;
-	};
-
-	wl12xx_vaux2: wl12xx_vaux2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271_vaux2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-};
-
-&omap3_pmx_wkup {
-
-	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
-			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE4)	/* sys_boot4.gpio_6 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-
-	phy1_reset_pins: pinmux_hsusb1_phy_reset_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE4)	/* uart2_tx.gpio_146 */
-		>;
-	};
-
-	phy2_reset_pins: pinmux_hsusb2_phy_reset_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217a, PIN_OUTPUT | MUX_MODE4)	/* uart2_rx.gpio_147 */
-		>;
-	};
-
-	otg_drv_vbus: pinmux_otg_drv_vbus {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	wl12xx_core_pins: pinmux_wl12xx_core_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs5.gpio_56 */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart2_rts.gpio_145 */
-		>;
-	};
-
-	usb_hub_pins: pinmux_usb_hub_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 - USB HUB RST */
-		>;
-	};
-};
-
-&hsusb1_phy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&phy1_reset_pins>;
-	reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
-};
-
-&hsusb2_phy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&phy2_reset_pins>;
-	reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
-};
-
-&davinci_emac {
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&am35x_otg_hs {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&otg_drv_vbus>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&wl12xx_vmmc2>;
-	vqmmc-supply = <&wl12xx_vaux2>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 145 */
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&dss_dpi_pins_common
-		&dss_dpi_pins_cm_t35x
-	>;
-};
-
diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts
deleted file mode 100644
index bc545ee23e711..0000000000000
--- a/arch/arm/boot/dts/omap3-cm-t3530.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Support for CompuLab CM-T3530
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "omap3-cm-t3x30.dtsi"
-
-/ {
-	model = "CompuLab CM-T3530";
-	compatible = "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
-
-	/* Regulator to trigger the reset signal of the Wifi module */
-	mmc2_sdio_reset: regulator-mmc2-sdio-reset {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-mmc2-sdio-reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&omap3_pmx_core {
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat4.sdmmc2_dir_dat0 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat5.sdmmc2_dir_dat1 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat6.sdmmc2_dir_cmd */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)		/* sdmmc2_dat7.sdmmc2_clkin */
-		>;
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&mmc2_sdio_reset>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&dss_dpi_pins_common
-		&dss_dpi_pins_cm_t35x
-	>;
-};
-
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
deleted file mode 100644
index e1b1a047f77a0..0000000000000
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Support for CompuLab CM-T3730
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "omap3-cm-t3x30.dtsi"
-
-/ {
-	model = "CompuLab CM-T3730";
-	compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3";
-
-	wl12xx_vmmc2: wl12xx_vmmc2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vw1271";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;   /* gpio73 */
-		startup-delay-us = <20000>;
-		enable-active-high;
-	};
-
-	wl12xx_vaux2: wl12xx_vaux2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271_vaux2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vaux2>;
-	};
-};
-
-&omap3_pmx_wkup {
-	dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)	/* dss_data3.gpio_73 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 */
-		>;
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&wl12xx_vmmc2>;
-	vqmmc-supply = <&wl12xx_vaux2>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&dss_dpi_pins_common
-		&dss_dpi_pins_cm_t3730
-	>;
-};
-
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
deleted file mode 100644
index 51baedf1603bd..0000000000000
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ /dev/null
@@ -1,326 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common support for CompuLab CM-T3x CoMs
- */
-
-/ {
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&green_led_pins>;
-		ledb {
-			label = "cm-t3x:green";
-			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;  /* gpio186 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	/* HS USB Port 1 Power */
-	hsusb1_power: hsusb1_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb1_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&hsusb1_power>;
-		#phy-cells = <0>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&hsusb2_power>;
-		#phy-cells = <0>;
-	};
-
-	ads7846reg: ads7846-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "ads7846-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	tv0: svideo-connector {
-		compatible = "svideo-connector";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-	};
-};
-
-&omap3_pmx_core {
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT  | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	green_led_pins: pinmux_green_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4)	/* sys_clkout2.gpio_186 */
-		>;
-	};
-
-	dss_dpi_pins_common: pinmux_dss_dpi_pins_common {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-		>;
-	};
-
-	dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-		>;
-	};
-
-	ads7846_pins: pinmux_ads7846_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx */
-			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx */
-			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr */
-			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx */
-		>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	bus-width = <4>;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	at24@50 {
-		compatible = "atmel,24c02";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy &hsusb2_phy>;
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-
-	/* touch controller */
-	ads7846@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ads7846_pins>;
-
-		compatible = "ti,ads7846";
-		vcc-supply = <&ads7846reg>;
-
-		reg = <0>;			/* CS0 */
-		spi-max-frequency = <1500000>;
-
-		interrupt-parent = <&gpio2>;
-		interrupts = <25 0>;		/* gpio_57 */
-		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-		ti,x-min = /bits/ 16 <0x0>;
-		ti,x-max = /bits/ 16 <0x0fff>;
-		ti,y-min = /bits/ 16 <0x0>;
-		ti,y-max = /bits/ 16 <0x0fff>;
-
-		ti,x-plate-ohms = /bits/ 16 <180>;
-		ti,pressure-max = /bits/ 16 <255>;
-
-		ti,debounce-max = /bits/ 16 <30>;
-		ti,debounce-tol = /bits/ 16 <10>;
-		ti,debounce-rep = /bits/ 16 <1>;
-
-		wakeup-source;
-	};
-};
-
-&venc {
-	status = "okay";
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&tv_connector_in>;
-			ti,channels = <2>;
-		};
-	};
-};
-
-&mcbsp2 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x01000000>;	/* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		ti,nand-ecc-opt = "sw";
-
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <120>;
-		gpmc,cs-wr-off-ns = <120>;
-
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <120>;
-		gpmc,adv-wr-off-ns = <120>;
-
-		gpmc,we-on-ns = <6>;
-		gpmc,we-off-ns = <90>;
-
-		gpmc,oe-on-ns = <6>;
-		gpmc,oe-off-ns = <90>;
-
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,access-ns = <72>;
-		gpmc,cycle2cycle-delay-ns = <60>;
-
-		gpmc,rd-cycle-ns = <120>;
-		gpmc,wr-cycle-ns = <120>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "xloader";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "uboot";
-			reg = <0x80000 0x1e0000>;
-		};
-		partition@260000 {
-			label = "uboot environment";
-			reg = <0x260000 0x40000>;
-		};
-		partition@2a0000 {
-			label = "linux";
-			reg = <0x2a0000 0x400000>;
-		};
-		partition@6a0000 {
-			label = "rootfs";
-			reg = <0x6a0000 0x1f880000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
deleted file mode 100644
index 5e8943539fcc2..0000000000000
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common support for CompuLab CM-T3x30 CoMs
- */
-
-#include "omap3-cm-t3x.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "cm-t35";
-
-		ti,mcbsp = <&mcbsp2>;
-	};
-};
-
-&omap3_pmx_core {
-
-	smsc1_pins: pinmux_smsc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs5.gpmc_ncs5 */
-			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_163 */
-		>;
-	};
-
- 	hsusb0_pins: pinmux_hsusb0_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_stp.hsusb0_stp */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data0.hsusb2_data0 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-		>;
-	};
-};
-
-#include "omap-gpmc-smsc911x.dtsi"
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
-		 <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
-
-	smsc1: ethernet@gpmc {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc1_pins>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		reg = <5 0 0xff>;
-	};
-};
-
-&i2c1 {
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-#include <dt-bindings/input/input.h>
-
-&venc {
-	vdda-supply = <&vdac>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-};
-
-&twl_gpio {
-	ti,use-leds;
-	/* pullups: BIT(0) */
-	ti,pullups = <0x000001>;
-};
-
-&twl_keypad {
-	linux,keymap = <
-				MATRIX_KEY(0x00, 0x01, KEY_A)
-				MATRIX_KEY(0x00, 0x02, KEY_B)
-				MATRIX_KEY(0x00, 0x03, KEY_LEFT)
-
-				MATRIX_KEY(0x01, 0x01, KEY_UP)
-				MATRIX_KEY(0x01, 0x02, KEY_ENTER)
-				MATRIX_KEY(0x01, 0x03, KEY_DOWN)
-
-				MATRIX_KEY(0x02, 0x01, KEY_RIGHT)
-				MATRIX_KEY(0x02, 0x02, KEY_C)
-				MATRIX_KEY(0x02, 0x03, KEY_D)
-			>;
-};
-
-&hsusb1_phy {
-	reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
-};
-
-&hsusb2_phy {
-	reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
-};
-
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb0_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
deleted file mode 100644
index 0da759f8e2c2d..0000000000000
--- a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP3 SoC CPU thermal
- *
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-cpu_thermal: cpu-thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
-	coefficients = <0 20000>;
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     0>;
-
-	cpu_trips: trips {
-		cpu_alert0: cpu_alert {
-			temperature = <80000>; /* millicelsius */
-			hysteresis = <2000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu_crit: cpu_crit {
-			temperature = <90000>; /* millicelsius */
-			hysteresis = <2000>; /* millicelsius */
-			type = "critical";
-		};
-	};
-
-	cpu_cooling_maps: cooling-maps {
-		map0 {
-			trip = <&cpu_alert0>;
-			cooling-device =
-				<&cpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
deleted file mode 100644
index 38aa1febc33f3..0000000000000
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ /dev/null
@@ -1,392 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Author: Anil Kumar <anilk4.v@gmail.com>
- */
-
-#include <dt-bindings/input/input.h>
-
-#include "omap34xx.dtsi"
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;	/* 256 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-heartbeat {
-			label = "devkit8000::led1";
-			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-mmc {
-			label = "devkit8000::led2";
-			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
-			default-state = "on";
-			linux,default-trigger = "none";
-		};
-
-		led-usr {
-			label = "devkit8000::led3";
-			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
-			default-state = "on";
-			linux,default-trigger = "usr";
-		};
-
-		led-pmu-stat {
-			label = "devkit8000::pmu_stat";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "devkit8000";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,audio-routing =
-			"Ext Spk", "PREDRIVEL",
-			"Ext Spk", "PREDRIVER",
-			"MAINMIC", "Main Mic",
-			"Main Mic", "Mic Bias 1";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		user {
-			label = "user";
-			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			linux,code = <BTN_EXTRA>;
-			wakeup-source;
-		};
-	};
-
-	tfp410: encoder0 {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&dpi_dvi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c2>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	tv0: connector1 {
-		compatible = "svideo-connector";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>;	/* SYS_NIRQ cascaded to intc */
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	status = "disabled";
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vqmmc-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-	/*
-	 * pulldowns:
-	 * BIT(1), BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
-	 * BIT(15), BIT(16), BIT(17)
-	 */
-	ti,pulldowns = <0x03a1c6>;
-};
-
-&twl_keypad {
-	linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
-			MATRIX_KEY(1, 0, KEY_2)
-			MATRIX_KEY(2, 0, KEY_3)
-			MATRIX_KEY(0, 1, KEY_4)
-			MATRIX_KEY(1, 1, KEY_5)
-			MATRIX_KEY(2, 1, KEY_6)
-			MATRIX_KEY(3, 1, KEY_F5)
-			MATRIX_KEY(0, 2, KEY_7)
-			MATRIX_KEY(1, 2, KEY_8)
-			MATRIX_KEY(2, 2, KEY_9)
-			MATRIX_KEY(3, 2, KEY_F6)
-			MATRIX_KEY(0, 3, KEY_F7)
-			MATRIX_KEY(1, 3, KEY_0)
-			MATRIX_KEY(2, 3, KEY_F8)
-			MATRIX_KEY(4, 5, KEY_RESERVED)
-			MATRIX_KEY(4, 4, KEY_VOLUMEUP)
-			MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)
-			>;
-};
-
-&wdt2 {
-	status = "disabled";
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
-		  6 0 0x2c000000 0x1000000>;	/* CS6: 16MB for DM9000 */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		ti,nand-ecc-opt = "sw";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		x-loader@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-
-		bootloaders@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1e0000>;
-		};
-
-		bootloaders_env@260000 {
-			label = "U-Boot Env";
-			reg = <0x260000 0x20000>;
-		};
-
-		kernel@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x400000>;
-		};
-
-		filesystem@680000 {
-			label = "File System";
-			reg = <0x680000 0xf980000>;
-		};
-	};
-
-	ethernet@6,0 {
-		compatible = "davicom,dm9000";
-		reg =  <6 0x000 2
-			6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
-		bank-width = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
-		davicom,no-eeprom;
-
-		gpmc,mux-add-data = <0>;
-		gpmc,device-width = <1>;
-		gpmc,wait-pin = <0>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
-		gpmc,cs-on-ns = <6>;
-		gpmc,cs-rd-off-ns = <180>;
-		gpmc,cs-wr-off-ns = <180>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <144>;
-		gpmc,page-burst-access-ns = <24>;
-		gpmc,bus-turnaround-ns = <90>;
-		gpmc,cycle2cycle-delay-ns = <90>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,wr-access-ns = <0>;
-	};
-};
-
-&omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-		>;
-	};
-};
-
-&vpll1 {
-	/* Needed for DSS */
-	regulator-name = "vdds_dsi";
-
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	vdds_dsi-supply = <&vpll1>;
-	vdda_dac-supply = <&vdac>;
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		dpi_dvi_out: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-
-		endpoint@1 {
-			reg = <1>;
-		};
-	};
-};
-
-&venc {
-	status = "okay";
-
-	vdda-supply = <&vdac>;
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&tv_connector_in>;
-			ti,channels = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
deleted file mode 100644
index a7f99ae0c1fe9..0000000000000
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
- */
-
-#include "omap3-devkit8000-common.dtsi"
-/ {
-	aliases {
-		display0 = &lcd0;
-		display1 = &dvi0;
-		display2 = &tv0;
-	};
-
-	lcd0: display {
-		compatible = "panel-dpi";
-		label = "lcd";
-
-		enable-gpios = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_lcd_out>;
-			};
-		};
-	};
-};
-
-&dss {
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		dpi_lcd_out: endpoint@1 {
-			reg = <1>;
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&vio {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&mcspi2 {
-
-	/* touch controller */
-	ads7846@0 {
-		compatible = "ti,ads7846";
-		vcc-supply = <&vio>;
-
-		reg = <0>;			/* CS0 */
-		spi-max-frequency = <1500000>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <27 0>;		/* gpio_27 */
-		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
-
-		ti,x-min = /bits/ 16 <0x0>;
-		ti,x-max = /bits/ 16 <0x0fff>;
-		ti,y-min = /bits/ 16 <0x0>;
-		ti,y-max = /bits/ 16 <0x0fff>;
-		ti,x-plate-ohms = /bits/ 16 <180>;
-		ti,pressure-max = /bits/ 16 <255>;
-		ti,debounce-max = /bits/ 16 <10>;
-		ti,debounce-tol = /bits/ 16 <5>;
-		ti,debounce-rep = /bits/ 16 <1>;
-		ti,keep-vref-on = <1>;
-		ti,settle-delay-usec = /bits/ 16 <150>;
-
-		wakeup-source;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
deleted file mode 100644
index afed85078ad8d..0000000000000
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
- */
-/dts-v1/;
-
-/*
- * 4.3'' LCD panel sold with devkit8000 board
- */
-
-#include "omap3-devkit8000-lcd-common.dtsi"
-/ {
-	model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel";
-	compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
-
-	lcd0: display {
-		panel-timing {
-			clock-frequency = <10164705>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <2>;
-			hback-porch = <2>;
-			hsync-len = <41>;
-			vback-porch = <2>;
-			vfront-porch = <2>;
-			vsync-len = <10>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
deleted file mode 100644
index 07c51a105c0d7..0000000000000
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
- */
-/dts-v1/;
-
-/*
- * 7.0'' LCD panel sold with some devkit8000 board
- */
-
-#include "omap3-devkit8000-lcd-common.dtsi"
-/ {
-	model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel";
-	compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
-
-	lcd0: display {
-		panel-timing {
-			clock-frequency = <40000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <1>;
-			hback-porch = <1>;
-			hsync-len = <48>;
-			vback-porch = <25>;
-			vfront-porch = <12>;
-			vsync-len = <3>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
deleted file mode 100644
index 162d0726b0080..0000000000000
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Author: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
- */
-/dts-v1/;
-
-#include "omap3-devkit8000-common.dtsi"
-/ {
-	model = "TimLL OMAP3 Devkit8000";
-	compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
-
-	aliases {
-		display1 = &dvi0;
-		display2 = &tv0;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts
deleted file mode 100644
index 06d2377d28adb..0000000000000
--- a/arch/arm/boot/dts/omap3-echo.dts
+++ /dev/null
@@ -1,724 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2019 André Hentschel <nerv@dawncrow.de>
- */
-/dts-v1/;
-
-#include "dm3725.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Amazon Echo (first generation)";
-	compatible = "amazon,omap3-echo", "ti,omap3630", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0xc600000>; /* 198 MB */
-	};
-
-	vcc5v: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc3v3: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc1v8: fixedregulator2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <40>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-
-		mute-button {
-			label = "mute";
-			linux,code = <KEY_MUTE>;
-			gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;	/* GPIO_70 */
-			wakeup-source;
-		};
-
-		help-button {
-			label = "help";
-			linux,code = <KEY_HELP>;
-			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;	/* GPIO_72 */
-			wakeup-source;
-		};
-	};
-
-	rotary: rotary-encoder {
-		compatible = "rotary-encoder";
-		gpios = <
-			&gpio3  5 GPIO_ACTIVE_HIGH /* GPIO_69 */
-			&gpio3 12 GPIO_ACTIVE_HIGH /* GPIO_76 */
-		>;
-		linux,axis = <REL_X>;
-		rotary-encoder,relative-axis;
-	};
-
-	speaker_amp: speaker-amplifier {
-		compatible = "simple-audio-amplifier";
-		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* gpio_129 */
-		sound-name-prefix = "Speaker Amp";
-		VCC-supply = <&vcc1v8>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Misto Speaker";
-		simple-audio-card,widgets =
-			"Speaker", "Speaker";
-		simple-audio-card,routing =
-			"Speaker Amp INL", "HPL",
-			"Speaker Amp INR", "HPR",
-			"Speaker", "Speaker Amp OUTL",
-			"Speaker", "Speaker Amp OUTR";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_master>;
-		simple-audio-card,frame-master = <&sound_master>;
-		simple-audio-card,aux-devs = <&speaker_amp>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcbsp2>;
-		};
-
-		sound_master: simple-audio-card,codec {
-			sound-dai = <&codec0>;
-			system-clock-frequency = <19200000>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&mcbsp2 {
-	status = "okay";
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-
-	lp5523A: lp5523A@32 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "national,lp5523";
-		label = "q1";
-		reg = <0x32>;
-		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
-
-		multi-led@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-			color = <LED_COLOR_ID_RGB>;
-
-			led@0 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x0>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@1 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@6 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x6>;
-				color = <LED_COLOR_ID_RED>;
-			};
-		};
-		multi-led@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1>;
-			color = <LED_COLOR_ID_RGB>;
-
-			led@2 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@3 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x3>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@7 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x7>;
-				color = <LED_COLOR_ID_RED>;
-			};
-		};
-		multi-led@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-			color = <LED_COLOR_ID_RGB>;
-
-			led@4 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x4>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@5 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x5>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@8 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x8>;
-				color = <LED_COLOR_ID_RED>;
-			};
-		};
-	};
-
-	lp5523B: lp5523B@33 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "national,lp5523";
-		label = "q3";
-		reg = <0x33>;
-		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-
-		multi-led@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-			color = <LED_COLOR_ID_RGB>;
-
-			led@0 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x0>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@1 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@6 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x6>;
-				color = <LED_COLOR_ID_RED>;
-			};
-		};
-		multi-led@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1>;
-			color = <LED_COLOR_ID_RGB>;
-
-			led@2 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@3 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x3>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@7 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x7>;
-				color = <LED_COLOR_ID_RED>;
-			};
-		};
-		multi-led@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-			color = <LED_COLOR_ID_RGB>;
-
-			led@4 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x4>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@5 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x5>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@8 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x8>;
-				color = <LED_COLOR_ID_RED>;
-			};
-		};
-	};
-
-	lp5523C: lp5523C@34 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "national,lp5523";
-		label = "q4";
-		reg = <0x34>;
-		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-
-		multi-led@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-			color = <LED_COLOR_ID_RGB>;
-
-			led@0 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x0>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@1 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@6 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x6>;
-				color = <LED_COLOR_ID_RED>;
-			};
-		};
-		multi-led@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1>;
-			color = <LED_COLOR_ID_RGB>;
-
-			led@2 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@3 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x3>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@7 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x7>;
-				color = <LED_COLOR_ID_RED>;
-			};
-		};
-		multi-led@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-			color = <LED_COLOR_ID_RGB>;
-
-			led@4 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x4>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@5 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x5>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@8 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x8>;
-				color = <LED_COLOR_ID_RED>;
-			};
-		};
-	};
-
-	lp5523D: lp552D@35 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "national,lp5523";
-		label = "q2";
-		reg = <0x35>;
-		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-
-		multi-led@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-			color = <LED_COLOR_ID_RGB>;
-
-			led@0 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x0>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@1 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@6 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x6>;
-				color = <LED_COLOR_ID_RED>;
-			};
-		};
-		multi-led@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1>;
-			color = <LED_COLOR_ID_RGB>;
-
-			led@2 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@3 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x3>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@7 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x7>;
-				color = <LED_COLOR_ID_RED>;
-			};
-		};
-		multi-led@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-			color = <LED_COLOR_ID_RGB>;
-
-			led@4 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x4>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@5 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x5>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@8 {
-				led-cur = /bits/ 8 <12>;
-				max-cur = /bits/ 8 <15>;
-				reg = <0x8>;
-				color = <LED_COLOR_ID_RED>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	codec0: codec@18 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic32x4";
-		reg = <0x18>;
-		clocks = <&sys_clkout1>;
-		clock-names = "mclk";
-		ldoin-supply = <&vcc1v8>;
-		iov-supply = <&vcc1v8>;
-		reset-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;	/* gpio_74 */
-	};
-};
-
-
-#include "tps65910.dtsi"
-
-&omap3_pmx_core {
-	tps_pins: pinmux_tps_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_INPUT_PULLUP | PIN_OFF_OUTPUT_LOW | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4)	/* dss_data0.gpio_70 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4)	/* dss_data2.gpio_72 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4)	/* dss_data4.gpio_74 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* dss_data15.gpio_85 */
-			OMAP3_CORE1_IOPAD(0x2a1a, PIN_OUTPUT | MUX_MODE0)	/* sys_clkout1.sys_clkout1 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
-			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
-			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
-			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
-			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_ctl.sdmmc3_cmd */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
-		>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc_reg>;
-};
-
-&mmc2 {
-	status = "okay";
-	bus-width = <8>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&vmmc_reg>;
-};
-
-&mmc3 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins>;
-	non-removable;
-	disable-wp;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	vmmc-supply = <&vcc3v3>;
-	vqmmc-supply = <&vcc1v8>;
-	atheros@0 {
-		compatible = "atheros,ath6kl";
-		reg = <0>;
-		bus-width = <4>;
-	};
-};
-
-&tps {
-	pinctrl-names = "default";
-	pinctrl-0 = <&tps_pins>;
-
-	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-	interrupt-parent = <&intc>;
-
-	ti,en-ck32k-xtal;
-	ti,system-power-controller;
-
-	vcc1-supply = <&vcc5v>;
-	vcc2-supply = <&vcc5v>;
-	vcc3-supply = <&vcc5v>;
-	vcc4-supply = <&vcc5v>;
-	vcc5-supply = <&vcc5v>;
-	vcc6-supply = <&vcc5v>;
-	vcc7-supply = <&vcc5v>;
-	vccio-supply = <&vcc5v>;
-
-	regulators {
-
-		vio_reg: regulator@1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			regulator-name = "vdd_dsp";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2850000>;
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
deleted file mode 100644
index abd403c228c7a..0000000000000
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ /dev/null
@@ -1,107 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "omap3-evm-common.dtsi"
-#include "omap3-evm-processor-common.dtsi"
-
-/ {
-	model = "TI OMAP37XX EVM (TMDSEVM3730)";
-	compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-
-	ehci_phy_pins: pinmux_ehci_phy_pins {
-		pinctrl-single,pins = <
-
-		/* EHCI PHY reset GPIO etk_d7.gpio_21 */
-		OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
-
-		/* EHCI VBUS etk_d8.gpio_22 */
-		OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
-		>;
-	};
-
-	/* Used by OHCI and EHCI. OHCI won't work without external phy */
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-
-		/* etk_d10.hsusb2_clk */
-		OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
-
-		/* etk_d11.hsusb2_stp */
-		OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
-
-		/* etk_d12.hsusb2_dir */
-		OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
-		/* etk_d13.hsusb2_nxt */
-		OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
-		/* etk_d14.hsusb2_data0 */
-		OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
-		/* etk_d15.hsusb2_data1 */
-		OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
-		>;
-	};
-};
-
-&gpmc {
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "hynix,h8kds0un0mer-4em";
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1c0000>;
-		};
-		partition@1c0000 {
-			label = "Environment";
-			reg = <0x240000 0x40000>;
-		};
-		partition@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x500000>;
-		};
-		partition@780000 {
-			label = "Filesystem";
-			reg = <0x780000 0x1f880000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
deleted file mode 100644
index 17c89df6ce6b1..0000000000000
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ /dev/null
@@ -1,198 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common support for omap3 EVM boards
- */
-
-#include <dt-bindings/input/input.h>
-#include "omap-gpmc-smsc911x.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
-		vcc-supply = <&hsusb2_power>;
-		#phy-cells = <0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		ledb {
-			label = "omap3evm::ledb";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>;	/* gpio150 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		vin-supply = <&vmmc2>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-#include "omap3-panel-sharp-ls037v7dw01.dtsi"
-
-&backlight0 {
-	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
-};
-
-&twl {
-	twl_power: power {
-		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
-		ti,use_poweroff;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * TVP5146 Video decoder-in for analog input support.
-	 */
-	tvp5146@5c {
-		compatible = "ti,tvp5146m2";
-		reg = <0x5c>;
-	};
-};
-
-&lcd_3v3 {
-	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
-};
-
-&lcd0 {
-	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
-	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
-	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
-		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
-		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
-};
-
-&mcspi1 {
-	tsc2046@0 {
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 0>;		/* gpio175 */
-		pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&mmc1 {
-	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
-	vmmc-supply = <&vmmc1>;
-	vqmmc-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		/* gpio_149 with uart1_rts pad as wakeirq */
-		interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>,
-				      <&omap3_pmx_core 0x14e>;
-		interrupt-names = "irq", "wakeup";
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&twl_keypad {
-	linux,keymap = <
-			MATRIX_KEY(2, 2, KEY_1)
-			MATRIX_KEY(1, 1, KEY_2)
-			MATRIX_KEY(0, 0, KEY_3)
-			MATRIX_KEY(3, 2, KEY_4)
-			MATRIX_KEY(2, 1, KEY_5)
-			MATRIX_KEY(1, 0, KEY_6)
-			MATRIX_KEY(1, 3, KEY_7)
-			MATRIX_KEY(3, 1, KEY_8)
-			MATRIX_KEY(2, 0, KEY_9)
-			MATRIX_KEY(2, 3, KEY_KPASTERISK)
-			MATRIX_KEY(0, 2, KEY_0)
-			MATRIX_KEY(3, 0, KEY_KPDOT)
-			/* s4 not wired */
-			MATRIX_KEY(1, 2, KEY_BACKSPACE)
-			MATRIX_KEY(0, 1, KEY_ENTER)
-			>;
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&gpmc {
-	ethernet@gpmc {
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 8>;
-		reg = <5 0 0xff>;
-	};
-};
-
-&vaux2 {
-	regulator-name = "usb_1v8";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
deleted file mode 100644
index e6ba30a211663..0000000000000
--- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Common support for omap3 EVM 35xx/37xx processor modules
- */
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-	};
-};
-
-&dss {
-	vdds_dsi-supply = <&vpll2>;
-	vdda_video-supply = <&lcd_3v3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&dss_dpi_pins1
-		&dss_dpi_pins2
-	>;
-};
-
-&hsusb2_phy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ehci_phy_pins>;
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>;
-
-	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
-			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
-			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
-			OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
-			OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
-		>;
-	};
-
-	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat4.sdmmc2_dir_dat0 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat5.sdmmc2_dir_dat1 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat6.sdmmc2_dir_cmd */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)	/* sdmmc2_dat7.sdmmc2_clkin */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	/* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */
-	on_board_gpio_61: pinmux_ehci_port_select_pins {
-		pinctrl-single,pins = <
-		OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4)
-		>;
-	};
-
-	/* Used by OHCI and EHCI. OHCI won't work without external phy */
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-
-		/* mcspi1_cs3.hsusb2_data2 */
-		OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
-		/* mcspi2_clk.hsusb2_data7 */
-		OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
-		/* mcspi2_simo.hsusb2_data4 */
-		OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
-		/* mcspi2_somi.hsusb2_data5 */
-		OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
-		/* mcspi2_cs0.hsusb2_data6 */
-		OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
-		/* mcspi2_cs1.hsusb2_data3 */
-		OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)
-		>;
-	};
-
-	/*
-	 * Note that gpio_150 pulled high with internal pull to prevent wlcore
-	 * reset on return from off mode in idle.
-	 */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7)		/* uart1_cts.gpio_150 */
-			OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
-		>;
-	};
-
-	smsc911x_pins: pinmux_smsc911x_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
-		>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&uart1 {
-	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
-};
-
-&uart2 {
-	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-/*
- * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface
- * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
- */
-&gpio2 {
-	en-usb2-port-hog {
-		gpio-hog;
-		gpios = <29 GPIO_ACTIVE_HIGH>;	/* gpio_61 */
-		output-low;
-		line-name = "enable usb2 port";
-	};
-};
-
-/* T2_GPIO_2 low to route GPIO_61 to on-board devices */
-&twl_gpio {
-	en_on_board_gpio_61 {
-		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "en_hsusb2_clk";
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>,	/* CS0: 16MB for NAND */
-		 <5 0 0x2c000000 0x01000000>;	/* CS5: 16MB for LAN9220 */
-
-	ethernet@gpmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc911x_pins>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
deleted file mode 100644
index f95eea63b355f..0000000000000
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "omap3-evm-common.dtsi"
-#include "omap3-evm-processor-common.dtsi"
-
-/ {
-	model = "TI OMAP35XX EVM (TMDSEVM3530)";
-	compatible = "ti,omap3-evm", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-
-	ehci_phy_pins: pinmux_ehci_phy_pins {
-		pinctrl-single,pins = <
-
-		/* EHCI PHY reset GPIO etk_d7.gpio_21 */
-		OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
-
-		/* EHCI VBUS etk_d8.gpio_22 */
-		OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
-		>;
-	};
-
-	/* Used by OHCI and EHCI. OHCI won't work without external phy */
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-
-		/* etk_d10.hsusb2_clk */
-		OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
-
-		/* etk_d11.hsusb2_stp */
-		OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
-
-		/* etk_d12.hsusb2_dir */
-		OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
-		/* etk_d13.hsusb2_nxt */
-		OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
-		/* etk_d14.hsusb2_data0 */
-		OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
-		/* etk_d15.hsusb2_data1 */
-		OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
-		>;
-	};
-};
-
-&gpmc {
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,mt29f2g16abdhc";
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
deleted file mode 100644
index 4183fde460596..0000000000000
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ /dev/null
@@ -1,893 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
- *
- * Based on omap3-beagle-xm.dts
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "OMAP3 GTA04";
-	compatible = "goldelico,gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3";
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	aliases {
-		display0 = &lcd;
-		display1 = &tv0;
-		/delete-property/ mmc2;
-		/delete-property/ mmc3;
-	};
-
-	ldo_3v3: fixedregulator {
-		compatible = "regulator-fixed";
-		regulator-name = "ldo_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	/* fixed 26MHz oscillator */
-	hfclk_26m: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		aux-button {
-			label = "aux";
-			linux,code = <KEY_PHONE>;
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			wakeup-source;
-		};
-	};
-
-	antenna-detect {
-		compatible = "gpio-keys";
-
-		gps_antenna_button: gps-antenna-button {
-			label = "GPS_EXT_ANT";
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LINEIN_INSERT>;
-			gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */
-			interrupt-parent = <&gpio5>;
-			interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "gta04";
-
-		ti,mcbsp = <&mcbsp2>;
-	};
-
-	/* GSM audio */
-	sound_telephony {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "GTA04 voice";
-		simple-audio-card,bitclock-master = <&telephony_link_master>;
-		simple-audio-card,frame-master = <&telephony_link_master>;
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-inversion;
-		simple-audio-card,frame-inversion;
-		simple-audio-card,cpu {
-			sound-dai = <&mcbsp4>;
-		};
-
-		telephony_link_master: simple-audio-card,codec {
-			sound-dai = <&gtm601_codec>;
-		};
-	};
-
-	gtm601_codec: gsm_codec {
-		compatible = "option,gtm601";
-		#sound-dai-cells = <0>;
-	};
-
-	spi_lcd: spi {
-		compatible = "spi-gpio";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi_gpio_pins>;
-
-		sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-
-		/* lcd panel */
-		lcd: td028ttec1@0 {
-			compatible = "tpo,td028ttec1";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-
-			backlight = <&backlight>;
-			label = "lcd";
-			port {
-				lcd_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm11 0 12000000 0>;
-		pwm-names = "backlight";
-		brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <9>;	/* => 90 */
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-	};
-
-	pwm11: pwm-11 {
-		compatible = "ti,omap-dmtimer-pwm";
-		ti,timers = <&timer11>;
-		#pwm-cells = <3>;
-		ti,clock-source = <0x01>;
-	};
-
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-		#phy-cells = <0>;
-	};
-
-	tv0: connector {
-		compatible = "composite-video-connector";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&opa_out>;
-			};
-		};
-	};
-
-	tv_amp: opa362 {
-		compatible = "ti,opa362";
-		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;	/* GPIO_23 to enable video out amplifier */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				opa_in: endpoint {
-					remote-endpoint = <&venc_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				opa_out: endpoint {
-					remote-endpoint = <&tv_connector_in>;
-				};
-			};
-		};
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>;	/* W2CBW003 reset through tca6507 */
-	};
-
-	/* devconf0 setup for mcbsp1 clock pins */
-	pinmux_mcbsp1@48002274 {
-		compatible = "pinctrl-single";
-		reg = <0x48002274 4>;   /* CONTROL_DEVCONF0 */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-single,bit-per-mux;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x7>;	/* MCBSP1 CLK pinmux */
-		#pinctrl-cells = <2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcbsp1_devconf0_pins>;
-		mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins {
-			/*                   offset bits mask */
-			pinctrl-single,bits = <0x00 0x08 0x1c>;	/* set MCBSP1_CLKR */
-		};
-	};
-
-	/* devconf1 setup for tvout pins */
-	pinmux_tv_out@480022d8 {
-		compatible = "pinctrl-single";
-		reg = <0x480022d8 4>;	/* CONTROL_DEVCONF1 */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-single,bit-per-mux;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x81>;	/* TV out pin control */
-		#pinctrl-cells = <2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tv_acbias_devconf1_pins>;
-		tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins {
-			/*			offset	bits	mask */
-			pinctrl-single,bits = <0x00 0x40800 0x40800>;	/* set TVOUTBYPASS and TVOUTACEN */
-		};
-	};
-};
-
-&omap3_pmx_wkup {
-	gpio1_pins: pinmux_gpio1_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
-			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_pins
-	>;
-
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	backlight_pins: backlight_pins_pinmux {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3)		/* gpt11/gpio57 */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
-		>;
-	};
-
-	gps_pins: pinmux_gps_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */
-		>;
-	};
-
-	hdq_pins: hdq_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
-		>;
-	};
-
-	bmp085_pins: pinmux_bmp085_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */
-		>;
-	};
-
-	bma180_pins: pinmux_bma180_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
-		>;
-	};
-
-	itg3200_pins: pinmux_itg3200_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */
-		>;
-	};
-
-	hmc5843_pins: pinmux_hmc5843_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
-		>;
-	};
-
-	penirq_pins: pinmux_penirq_pins {
-		pinctrl-single,pins = <
-			/* here we could enable to wakeup the cpu from suspend by a pen touch */
-			OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
-		>;
-	};
-
-	camera_pins: pinmux_camera_pins {
-		pinctrl-single,pins = <
-			/* set up parallel camera interface */
-			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
-			OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */
-			OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
-			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */
-			OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */
-			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */
-			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */
-			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */
-			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */
-			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */
-			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */
-			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */
-			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */
-			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */
-			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */
-			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
-			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
-			OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */
-			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */
-			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
-			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_clkr.mcbsp1_fsr */
-			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
-			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
-			/* mcbsp_clks is used as PENIRQ */
-			/* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0)	   mcbsp_clks.mcbsp_clks */
-			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
-			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
-			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_clkx */
-			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2_dr */
-			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2_dx */
-		>;
-	};
-
-	mcbsp3_pins: pinmux_mcbsp3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0)	/* mcbsp3_dx.mcbsp3_dx */
-			OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0)	/* mcbsp3_dx.mcbsp3_dr */
-			OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0)	/* mcbsp3_clkx.mcbsp3_clkx */
-			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0)	/* mcbsp3_clkx.mcbsp3_fsx */
-		>;
-	};
-
-	mcbsp4_pins: pinmux_mcbsp4_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_clkx.mcbsp4_clkx */
-			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_clkx.mcbsp4_dr */
-			OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_dx.mcbsp4_fsx */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-
-	spi_gpio_pins: spi_gpio_pinmux {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		clocks = <&hfclk_26m>;
-		clock-names = "fck";
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			ti,enable-vibra = <1>;
-			codec {
-				ti,ramp_delay_value = <3>;
-			};
-		};
-
-		twl_power: power {
-			compatible = "ti,twl4030-power-idle";
-			ti,system-power-controller;
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-
-	/* pressure sensor */
-	bmp085@77 {
-		compatible = "bosch,bmp085";
-		reg = <0x77>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bmp085_pins>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
-		vdda-supply = <&vio>;
-		vddd-supply = <&vio>;
-	};
-
-	/* accelerometer */
-	bma180@41 {
-		compatible = "bosch,bma180";
-		reg = <0x41>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bma180_pins>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
-	};
-
-	/* gyroscope */
-	itg3200@68 {
-		compatible = "invensense,itg3200";
-		reg = <0x68>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&itg3200_pins>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */
-	};
-
-	/* leds + gpios */
-	tca6507: tca6507@45 {
-		compatible = "ti,tca6507";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x45>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gta04_led0: led@0 {
-			label = "gta04:red:aux";
-			reg = <0x0>;
-		};
-
-		gta04_led1: led@1 {
-			label = "gta04:green:aux";
-			reg = <0x1>;
-		};
-
-		gta04_led3: led@3 {
-			label = "gta04:red:power";
-			reg = <0x3>;
-			linux,default-trigger = "default-on";
-		};
-
-		gta04_led4: led@4 {
-			label = "gta04:green:power";
-			reg = <0x4>;
-		};
-
-		wifi_reset: led@6 {
-			/* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
-			reg = <0x6>;
-			compatible = "gpio";
-		};
-	};
-
-	/* compass aka magnetometer */
-	hmc5843@1e {
-		compatible = "honeywell,hmc5883l";
-		reg = <0x1e>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hmc5843_pins>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;	/* gpio112 */
-	};
-
-	/* touchscreen */
-	tsc2007@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&penirq_pins>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
-		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;	/* GPIO_160 */
-		ti,x-plate-ohms = <600>;
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <640>;
-		touchscreen-max-pressure = <1000>;
-		touchscreen-fuzz-x = <3>;
-		touchscreen-fuzz-y = <8>;
-		touchscreen-fuzz-pressure = <10>;
-		touchscreen-inverted-y;
-	};
-
-	/* RFID EEPROM */
-	m24lr64@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-};
-
-&mcspi1 {
-	status = "disabled";
-};
-
-&mcspi2 {
-	status = "disabled";
-};
-
-&mcspi3 {
-	status = "disabled";
-};
-
-&mcspi4 {
-	status = "disabled";
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	ti,non-removable;
-	broken-cd;	/* hardware has no CD */
-};
-
-&mmc2 {
-	vmmc-supply = <&vaux4>;
-	bus-width = <4>;
-	ti,non-removable;
-	cap-power-off-card;
-	mmc-pwrseq = <&wifi_pwrseq>;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-#define BIT(x) (1 << (x))
-&twl_gpio {
-	/* pullups: BIT(2) */
-	ti,pullups = <BIT(2)>;
-	/*
-	 * pulldowns:
-	 * BIT(0),  BIT(1), BIT(6), BIT(7), BIT(8), BIT(13)
-	 * BIT(15), BIT(16), BIT(17)
-	 */
-	ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) |
-			 BIT(13) | BIT(15) | BIT(16) | BIT(17))>;
-};
-
-&twl_keypad {
-	status = "disabled";
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio1_pins>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	gnss: gnss {
-		compatible = "wi2wi,w2sg0004";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gps_pins>;
-		sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
-		lna-supply = <&vsim>;
-		vcc-supply = <&ldo_3v3>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-};
-
-&charger {
-	ti,bb-uvolt = <3200000>;
-	ti,bb-uamp = <150>;
-};
-
-/* spare */
-&vaux1 {
-	regulator-min-microvolt = <2500000>;
-	regulator-max-microvolt = <3000000>;
-};
-
-/* sensors */
-&vaux2 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-	regulator-always-on;	/* we should never switch off while vio is on! */
-};
-
-/* camera */
-&vaux3 {
-	regulator-min-microvolt = <2500000>;
-	regulator-max-microvolt = <2500000>;
-};
-
-/* WLAN/BT */
-&vaux4 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <3150000>;
-};
-
-/* GPS LNA */
-&vsim {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <3150000>;
-};
-
-/* Needed to power the DPI pins */
-
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	pinctrl-names = "default";
-	pinctrl-0 = < &dss_dpi_pins >;
-
-	status = "okay";
-	vdds_dsi-supply = <&vpll2>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&venc {
-	status = "okay";
-
-	vdda-supply = <&vdac>;
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&opa_in>;
-			ti,channels = <1>;
-			ti,invert-polarity;
-		};
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		ti,nand-ecc-opt = "ham1";
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		nand-bus-width = <16>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		gpmc,device-width = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,we-off-ns = <40>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,sync-clk-ps = <0>;
-
-		x-loader@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-
-		bootloaders@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1c0000>;
-		};
-
-		bootloaders_env@240000 {
-			label = "U-Boot Env";
-			reg = <0x240000 0x40000>;
-		};
-
-		kernel@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x600000>;
-		};
-
-		filesystem@880000 {
-			label = "File System";
-			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
-		};
-	};
-};
-
-&mcbsp1 { /* FM Transceiver PCM */
-	status = "okay";
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-};
-
-&mcbsp2 { /* TPS65950 I2S */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-};
-
-&mcbsp3 { /* Bluetooth PCM */
-	status = "okay";
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp3_pins>;
-};
-
-&mcbsp4 { /* GSM voice PCM */
-	status = "okay";
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp4_pins>;
-};
-
-&hdqw1w {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdq_pins>;
-};
-
-/* image signal processor within OMAP3 SoC */
-&isp {
-	ports {
-		port@0 {
-			reg = <0>;
-			parallel_ep: endpoint {
-				ti,isp-clock-divisor = <1>;
-				ti,strobe-mode;
-				bus-width = <8>;/* Used data lines */
-				data-shift = <2>; /* Lines 9:2 are used */
-				hsync-active = <0>; /* Active low */
-				vsync-active = <1>; /* Active high */
-				data-active = <1>;/* Active high */
-				pclk-sample = <1>;/* Falling */
-			};
-		};
-		/* port@1 and port@2 are not used by GTA04 */
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-gta04a3.dts b/arch/arm/boot/dts/omap3-gta04a3.dts
deleted file mode 100644
index bfae1a9ceeacf..0000000000000
--- a/arch/arm/boot/dts/omap3-gta04a3.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
- */
-
-#include "omap3-gta04.dtsi"
-
-/ {
-	model = "Goldelico GTA04A3/Letux 2804";
-};
-
-&i2c2 {
-
-	/* alternate accelerometer that might be installed on some GTA04A3 boards */
-	lis302@1d {
-		compatible = "st,lis331dlh", "st,lis3lv02d";
-		reg = <0x1d>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
-		Vdd-supply = <&vaux2>;
-		Vdd_IO-supply = <&vaux2>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <8>;
-		st,click-thresh-y = <8>;
-		st,click-thresh-z = <10>;
-		st,click-click-time-limit = <9>;
-		st,click-latency = <50>;
-		st,irq1-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <32>;
-		st,min-limit-y = <3>;
-		st,min-limit-z = <3>;
-		st,max-limit-x = <3>;
-		st,max-limit-y = <32>;
-		st,max-limit-z = <32>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-gta04a4.dts b/arch/arm/boot/dts/omap3-gta04a4.dts
deleted file mode 100644
index f1cf24d55e6f7..0000000000000
--- a/arch/arm/boot/dts/omap3-gta04a4.dts
+++ /dev/null
@@ -1,10 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Marek Belisko <marek@goldelico.com>
- */
-
-#include "omap3-gta04.dtsi"
-
-/ {
-	model = "Goldelico GTA04A4/Letux 2804";
-};
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
deleted file mode 100644
index 425081201fd42..0000000000000
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
- */
-
-#include "omap3-gta04.dtsi"
-
-/ {
-	model = "Goldelico GTA04A5/Letux 2804";
-
-	sound {
-		ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;	/* GTA04A5 only */
-	};
-
-	wlan_en: wlan_en_regulator {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_pins>;
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* GPIO_138 */
-
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pps_pins>;
-
-		gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
-	};
-
-};
-
-&gpio5 {
-	irda-en-hog {
-		gpio-hog;
-		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
-		output-high;	/* activate gpio_175 to disable IrDA receiver */
-	};
-};
-
-&omap3_pmx_core {
-	bt_pins: pinmux_bt_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat5 = mmc3_dat1 = gpio137 */
-		>;
-	};
-
-	wlan_pins: pinmux_wlan_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat6 = mmc3_dat2 = gpio138 */
-		>;
-	};
-
-	wlan_irq_pin: pinmux_wlan_irq_pin {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4)	/* mmc2_dat7 = mmc3_dat3 = gpio139 */
-		>;
-	};
-
-	irda_pins: pinmux_irda {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* mcspi1_cs1 = gpio175 */
-		>;
-	};
-
-	pps_pins: pinmux_pps_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
-		>;
-	};
-
-	bno050_pins: pinmux-bno050-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT | MUX_MODE4) /* gpin113 */
-		>;
-	};
-};
-
-/*
- * for WL183x module see
- * Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
- */
-
-&wifi_pwrseq {
-	/delete-property/ reset-gpios;
-};
-
-&mmc2 {
-	vmmc-supply = <&wlan_en>;
-	bus-width = <4>;
-	cap-power-off-card;
-	non-removable;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&wlan_irq_pin>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	/delete-property/ mmc-pwrseq;
-
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1837";
-		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_139 */
-		ref-clock-frequency = <26000000>;
-	};
-};
-
-&i2c2 {
-	/delete-node/ bmp085@77;
-	/delete-node/ bma180@41;
-	/delete-node/ itg3200@68;
-	/delete-node/ hmc5843@1e;
-
-	gyrometer@69 {
-		compatible = "bosch,bmg160";
-		reg = <0x69>;
-	};
-
-	accelerometer@10 {
-		compatible = "bosch,bmc150_accel";
-		reg = <0x10>;
-	};
-
-	magnetometer@12 {
-		compatible = "bosch,bmc150_magn";
-		reg = <0x12>;
-	};
-
-	bme280@76 {
-		compatible = "bosch,bme280";
-		reg = <0x76>;
-		vdda-supply = <&vio>;
-		vddd-supply = <&vio>;
-	};
-
-	imu@29 {
-		compatible = "bosch,bno055";
-		reg = <0x29>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bno050_pins>;
-		/* interrupt at &gpio4 17 */
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-gta04a5one.dts b/arch/arm/boot/dts/omap3-gta04a5one.dts
deleted file mode 100644
index 9db9fe67cd63b..0000000000000
--- a/arch/arm/boot/dts/omap3-gta04a5one.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
- */
-
-#include "omap3-gta04a5.dts"
-
-&omap3_pmx_core {
-	model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
-
-	gpmc_pins: pinmux_gpmc_pins {
-		pinctrl-single,pins = <
-
-			/* address lines */
-			OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
-			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
-			OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
-
-			/* data lines, gpmc_d0..d7 not muxable according to TRM */
-			OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
-			OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
-			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
-			OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
-			OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
-			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
-			OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
-			OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
-
-			/*
-			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
-			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
-			 */
-			OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
-			OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
-		>;
-	};
-};
-
-&gpmc {
-	/* switch inherited setup to OneNAND */
-
-	ranges = <0 0 0x04000000 0x1000000>;	/* CS0: 16MB for OneNAND */
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmc_pins>;
-
-	/delete-node/ nand@0,0;
-
-	onenand@0,0 {
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "ti,omap2-onenand";
-		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
-
-		gpmc,sync-read;
-		gpmc,sync-write;
-		gpmc,burst-length = <16>;
-		gpmc,burst-read;
-		gpmc,burst-wrap;
-		gpmc,burst-write;
-		gpmc,device-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <87>;
-		gpmc,cs-wr-off-ns = <87>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <15>;
-		gpmc,oe-off-ns = <87>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <87>;
-		gpmc,rd-cycle-ns = <112>;
-		gpmc,wr-cycle-ns = <112>;
-		gpmc,access-ns = <81>;
-		gpmc,page-burst-access-ns = <15>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <5>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-		gpmc,wr-access-ns = <81>;
-		gpmc,sync-clk-ps = <15000>;
-
-		x-loader@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-
-		bootloaders@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1c0000>;
-		};
-
-		bootloaders_env@240000 {
-			label = "U-Boot Env";
-			reg = <0x240000 0x40000>;
-		};
-
-		kernel@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x600000>;
-		};
-
-		filesystem@880000 {
-			label = "File System";
-			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-ha-common.dtsi b/arch/arm/boot/dts/omap3-ha-common.dtsi
deleted file mode 100644
index a010585d0302a..0000000000000
--- a/arch/arm/boot/dts/omap3-ha-common.dtsi
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- */
-
-#include "omap3-tao3530.dtsi"
-
-/ {
-	gpio_poweroff {
-		pinctrl-names = "default";
-		pinctrl-0 = <&poweroff_pins>;
-
-		compatible = "gpio-poweroff";
-		gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;	/* GPIO 168 */
-	};
-};
-
-&omap3_pmx_core {
-	sound2_pins: pinmux_sound2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d8 gpio_44 */
-		>;
-	};
-
-	led_blue_pins: pinmux_led_blue_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4)	/* cam_xclka gpio_96, LED blue */
-		>;
-	};
-
-	led_green_pins: pinmux_led_green_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4)	/* cam_d8 gpio_107, LED green */
-		>;
-	};
-
-	led_red_pins: pinmux_led_red_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* cam_xclkb gpio_111, LED red */
-		>;
-	};
-
-	poweroff_pins: pinmux_poweroff_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* i2c2_scl gpio_168 */
-		>;
-	};
-
-	powerdown_input_pins: pinmux_powerdown_input_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4)	/* i2c2_sda gpio_183 */
-		>;
-	};
-
-	fpga_boot0_pins: fpga_boot0_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* cam_d2 gpio_101 */
-			OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4)	/* cam_d3 gpio_102 */
-			OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4)	/* cam_d4 gpio_103 */
-			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d5 gpio_104 */
-		>;
-	};
-
-	fpga_boot1_pins: fpga_boot1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4)	/* gpmc_d10 gpio_46 */
-			OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d11 gpio_47 */
-			OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d12 gpio_48 */
-			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_d13 gpio_49 */
-		>;
-	};
-};
-
-/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
-&i2c2 {
-	status = "disabled";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-};
diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts
deleted file mode 100644
index 643283f0c3dbb..0000000000000
--- a/arch/arm/boot/dts/omap3-ha-lcd.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- */
-
-#include "omap3-ha-common.dtsi"
-
-/ {
-	model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM";
-	compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&hsusbb2_pins
-		&powerdown_input_pins
-		&fpga_boot0_pins
-		&fpga_boot1_pins
-		&led_blue_pins
-		&led_green_pins
-		&led_red_pins
-		&touchscreen_wake_pins
-	>;
-
-	touchscreen_irq_pins: pinmux_touchscreen_irq_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpio_136, Touchscreen IRQ */
-		>;
-	};
-
-	touchscreen_wake_pins: pinmux_touchscreen_wake_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x212c, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* gpio_110, Touchscreen Wake */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-		>;
-	};
-
-	lte430_pins: pinmux_lte430_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 */
-		>;
-	};
-};
-
-/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
-&i2c2 {
-	status = "disabled";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	lcd0: display {
-		compatible = "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lte430_pins>;
-		enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 */
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-
-		panel-timing {
-			clock-frequency = <31250000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <40>;
-			hback-porch = <86>;
-			hsync-len = <1>;
-			vback-porch = <30>;
-			vfront-porch = <13>;
-			vsync-len = <3>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-		gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 */
-
-		default-on;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts
deleted file mode 100644
index 19e471eb3b4e1..0000000000000
--- a/arch/arm/boot/dts/omap3-ha.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- */
-
-#include "omap3-ha-common.dtsi"
-
-/ {
-	model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM";
-	compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&hsusbb2_pins
-		&powerdown_input_pins
-		&fpga_boot0_pins
-		&fpga_boot1_pins
-		&led_blue_pins
-		&led_green_pins
-		&led_red_pins
-	>;
-};
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
deleted file mode 100644
index 2192026104638..0000000000000
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ /dev/null
@@ -1,247 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Common device tree for IGEP boards based on AM/DM37x
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "igep2";
-		ti,mcbsp = <&mcbsp2>;
-	};
-
-	vdd33: regulator-vdd33 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33";
-		regulator-always-on;
-	};
-
-};
-
-&omap3_pmx_core {
-	gpmc_pins: pinmux_gpmc_pins {
-		pinctrl-single,pins = <
-			/* OneNAND seems to require PIN_INPUT on clock. */
-                        OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)	/* uart1_rx.uart1_rx */
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)	/* uart1_tx.uart1_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx.uart3_rx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx.uart3_tx */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
-			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
-			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
-			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
-		>;
-	};
-};
-
-&gpmc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmc_pins>;
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,mt29c4g96maz";
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		status = "okay";
-	};
-
-	onenand@0,0 {
-		compatible = "ti,omap2-onenand";
-		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
-
-		gpmc,sync-read;
-		gpmc,sync-write;
-		gpmc,burst-length = <16>;
-		gpmc,burst-wrap;
-		gpmc,burst-read;
-		gpmc,burst-write;
-		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
-		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <96>;
-		gpmc,cs-wr-off-ns = <96>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <12>;
-		gpmc,adv-wr-off-ns = <12>;
-		gpmc,oe-on-ns = <18>;
-		gpmc,oe-off-ns = <96>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <96>;
-		gpmc,rd-cycle-ns = <114>;
-		gpmc,wr-cycle-ns = <114>;
-		gpmc,access-ns = <90>;
-		gpmc,page-burst-access-ns = <12>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <6>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-		gpmc,wr-access-ns = <90>;
-		gpmc,sync-clk-ps = <12000>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		status = "disabled";
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <4>;
-	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
deleted file mode 100644
index 73d8f471b9ec9..0000000000000
--- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Common Device Tree Source for IGEPv2
- *
- * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
- * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
- */
-
-#include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-		compatible = "gpio-leds";
-
-		boot {
-			 label = "omap3:green:boot";
-			 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			 default-state = "on";
-		};
-
-		user0 {
-			 label = "omap3:red:user0";
-			 gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-			 default-state = "off";
-		};
-
-		user1 {
-			 label = "omap3:red:user1";
-			 gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-			 default-state = "off";
-		};
-
-		user2 {
-			label = "omap3:green:user1";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	/* HS USB Port 1 Power */
-	hsusb1_power: hsusb1_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb1_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* GPIO LEDA */
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
-		vcc-supply = <&hsusb1_power>;
-		#phy-cells = <0>;
-	};
-
-	tfp410: encoder {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&tfp410_pins
-		&dss_dpi_pins
-	>;
-
-	tfp410_pins: pinmux_tfp410_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
-		>;
-	};
-
-	smsc9221_pins: pinmux_smsc9221_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)	/* mcspi1_cs2.gpio_176 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&hsusbb1_pins
-	>;
-
-	hsusbb1_pins: pinmux_hsusbb1_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)		/* etk_ctl.hsusb1_clk */
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)		/* etk_clk.hsusb1_stp */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d8.hsusb1_dir */
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
-			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
-		>;
-	};
-
-	mmc1_wp_pins: pinmux_mmc1_cd_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4)   /* etk_d15.gpio_29 */
-		>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-
-	/*
-	 * Display monitor features are burnt in the EEPROM
-	 * as EDID data.
-	 */
-	eeprom@50 {
-		compatible = "ti,eeprom";
-		reg = <0x50>;
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x01000000>,	/* CS0: 16MB for NAND */
-		 <5 0 0x2c000000 0x01000000>;	/* CS5: 16MB for ethernet */
-
-	ethernet@gpmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc9221_pins>;
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
-
-&vpll2 {
-	/* Needed for DSS */
-	regulator-name = "vdds_dsi";
-};
-
-&dss {
-	status = "okay";
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&mmc1 {
-	pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
-	wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;	/* gpio_29 */
-};
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
deleted file mode 100644
index eadb5b857f48b..0000000000000
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x)
- *
- * Copyright (C) Javier Martinez Canillas <javier@dowhile0.org>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- */
-
-#include "omap3-igep0020-common.dtsi"
-
-/ {
-	model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap3";
-
-	/* Regulator to trigger the WL_EN signal of the Wifi module */
-	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-lbep5clwmc-wlen";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 - WL_EN */
-		enable-active-high;
-	};
-};
-
-&omap3_pmx_core {
-	lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT | MUX_MODE4)	/* mcspi1_cs3.gpio_177 - W_IRQ */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - BT_EN */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - WL_EN */
-		>;
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
-	vmmc-supply = <&lbep5clwmc_wlen>;
-	bus-width = <4>;
-	non-removable;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */
-	};
-};
-
-&uart2 {
-	bluetooth {
-		compatible = "ti,wl1835-st";
-		enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
-		max-speed = <300000>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
deleted file mode 100644
index 3f0197ceae09e..0000000000000
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- */
-
-#include "omap3-igep0020-common.dtsi"
-
-/ {
-	model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap3";
-
-	vmmcsdio_fixed: fixedregulator-mmcsdio {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsdio_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	mmc2_pwrseq: mmc2_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>,	/* gpio_139 - RESET_N_W */
-			      <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 - WIFI_PDN */
-	};
-};
-
-&omap3_pmx_core {
-	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - RESET_N_W */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 - WIFI_PDN */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - RST_N_B */
-		>;
-	};
-};
-
-/* On board Wifi module */
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
-	vmmc-supply = <&vmmcsdio_fixed>;
-	mmc-pwrseq = <&mmc2_pwrseq>;
-	bus-width = <4>;
-	non-removable;
-};
diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
deleted file mode 100644
index 742e3e1470633..0000000000000
--- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi
+++ /dev/null
@@ -1,103 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Common Device Tree Source for IGEP COM MODULE
- *
- * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
- * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
- */
-
-#include "omap3-igep.dtsi"
-
-/ {
-	leds: gpio_leds {
-		compatible = "gpio-leds";
-
-		user0 {
-			 label = "omap3:red:user0";
-			 gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* LEDA */
-			 default-state = "off";
-		};
-
-		user1 {
-			 label = "omap3:green:user1";
-			 gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;	/* LEDB */
-			 default-state = "off";
-		};
-
-		user2 {
-			 label = "omap3:red:user1";
-			 gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;		/* gpio_16 */
-			 default-state = "off";
-		};
-	};
-
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;		/* gpio_54 */
-		#phy-cells = <0>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_pins>;
-
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
-			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_clk.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)	/* mcbsp3_fsx.uart2_rx */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_core2_pins>;
-
-	hsusb2_core2_pins: pinmux_hsusb2_core2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		      /* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		      /* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-
-	leds_core2_pins: pinmux_leds_core2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)	/* etk_d2.gpio_16 */
-		>;
-	};
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x01000000>;   /* CS0: 16MB for NAND */
-};
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
deleted file mode 100644
index bc95a8df2e6a1..0000000000000
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
- *
- * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
- * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
- */
-
-#include "omap3-igep0030-common.dtsi"
-
-/ {
-	model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap3";
-
-	/* Regulator to trigger the WL_EN signal of the Wifi module */
-	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-lbep5clwmc-wlen";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 - WL_EN */
-		enable-active-high;
-	};
-};
-
-&omap3_pmx_core {
-	lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 - W_IRQ */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - BT_EN */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - WL_EN */
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)	/* i2c2_scl.gpio_168 */
-		>;
-	};
-
-};
-
-&i2c2 {
-	status = "disabled";
-};
-
-&leds {
-	pinctrl-names = "default";
-	pinctrl-0 = <&leds_pins &leds_core2_pins>;
-
-	boot {
-		label = "omap3:green:boot";
-		gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-		default-state = "on";
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
-	vmmc-supply = <&lbep5clwmc_wlen>;
-	bus-width = <4>;
-	non-removable;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
-	};
-};
-
-&uart2 {
-	bluetooth {
-		compatible = "ti,wl1835-st";
-		enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
-		max-speed = <300000>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
deleted file mode 100644
index d36ceecb7328c..0000000000000
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- */
-
-#include "omap3-igep0030-common.dtsi"
-
-/ {
-	model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap3";
-
-	vmmcsdio_fixed: fixedregulator-mmcsdio {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsdio_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	mmc2_pwrseq: mmc2_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>,	/* gpio_139 - RESET_N_W */
-			      <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 - WIFI_PDN */
-	};
-};
-
-&omap3_pmx_core {
-	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - RESET_N_W */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 - WIFI_PDN */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - RST_N_B */
-		>;
-	};
-};
-
-&leds {
-	pinctrl-names = "default";
-	pinctrl-0 = <&leds_core2_pins>;
-
-	boot {
-		label = "omap3:green:boot";
-		gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;	/* LEDSYNC */
-		default-state = "on";
-	};
-};
-
-/* On board Wifi module */
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
-	vmmc-supply = <&vmmcsdio_fixed>;
-	mmc-pwrseq = <&mmc2_pwrseq>;
-	bus-width = <4>;
-	non-removable;
-};
-
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
deleted file mode 100644
index 85f33bbb566f9..0000000000000
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ /dev/null
@@ -1,305 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "omap34xx.dtsi"
-#include "omap-gpmc-smsc911x.dtsi"
-
-/ {
-	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
-	compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap3";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128 MB */
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_key_pins>;
-
-		key_enter {
-			label = "enter";
-			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
-			linux,code = <KEY_ENTER>;
-			wakeup-source;
-		};
-
-		key_f1 {
-			label = "f1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
-			linux,code = <KEY_F1>;
-			wakeup-source;
-		};
-
-		key_f2 {
-			label = "f2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
-			linux,code = <KEY_F2>;
-			wakeup-source;
-		};
-
-		key_f3 {
-			label = "f3";
-			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
-			linux,code = <KEY_F3>;
-			wakeup-source;
-		};
-
-		key_f4 {
-			label = "f4";
-			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
-			linux,code = <KEY_F4>;
-			wakeup-source;
-		};
-
-		key_left {
-			label = "left";
-			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
-			linux,code = <KEY_LEFT>;
-			wakeup-source;
-		};
-
-		key_right {
-			label = "right";
-			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
-			linux,code = <KEY_RIGHT>;
-			wakeup-source;
-		};
-
-		key_up {
-			label = "up";
-			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
-			linux,code = <KEY_UP>;
-			wakeup-source;
-		};
-
-		key_down {
-			label = "down";
-			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
-			linux,code = <KEY_DOWN>;
-			wakeup-source;
-		};
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 space, 16MB */
-		 <1 0 0x08000000 0x1000000>;	/* CS1 space, 16MB */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,nand";
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x140000>;
-		};
-		partition@1c0000 {
-			label = "Environment";
-			reg = <0x1c0000 0x40000>;
-		};
-		partition@200000 {
-			label = "Kernel";
-			reg = <0x200000 0x1e00000>;
-		};
-		partition@2000000 {
-			label = "Filesystem";
-			reg = <0x2000000 0x6000000>;
-		};
-	};
-
-	ethernet@gpmc {
-		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-		reg = <1 0 0xff>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_power: power {
-			compatible = "ti,twl4030-power-idle";
-			ti,use_poweroff;
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-#include "omap3-panel-sharp-ls037v7dw01.dtsi"
-
-&backlight0 {
-	gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
-/* tps61130rsa enabled by twl4030 regen */
-&lcd_3v3 {
-	regulator-always-on;
-};
-
-&lcd0 {
-	enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>;	/* lcd INI */
-	reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;	/* gpio55, lcd RESB */
-	mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;	/* gpio56, lcd MO */
-};
-
-&mcspi1 {
-	tsc2046@0 {
-		interrupt-parent = <&gpio2>;
-		interrupts = <22 0>;		/* gpio54 */
-		pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&mmc1 {
-	/* See 35xx errata 2.1.1.128 in SPRZ278F */
-	compatible = "ti,omap3-pre-es3-hsmmc";
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&omap3_pmx_core {
-	gpio_key_pins: pinmux_gpio_key_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
-			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
-			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
-			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
-			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
-			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
-			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
-			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
-			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
-		>;
-	};
-
-	musb_pins: pinmux_musb_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
-		>;
-	};
-};
-
-&twl_keypad {
-	linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
-			MATRIX_KEY(0, 1, KEY_2)
-			MATRIX_KEY(0, 2, KEY_3)
-			MATRIX_KEY(1, 0, KEY_4)
-			MATRIX_KEY(1, 1, KEY_5)
-			MATRIX_KEY(1, 2, KEY_6)
-			MATRIX_KEY(1, 3, KEY_F5)
-			MATRIX_KEY(2, 0, KEY_7)
-			MATRIX_KEY(2, 1, KEY_8)
-			MATRIX_KEY(2, 2, KEY_9)
-			MATRIX_KEY(2, 3, KEY_F6)
-			MATRIX_KEY(3, 0, KEY_F7)
-			MATRIX_KEY(3, 1, KEY_0)
-			MATRIX_KEY(3, 2, KEY_F8)
-			MATRIX_KEY(5, 4, KEY_RESERVED)
-			MATRIX_KEY(4, 4, KEY_VOLUMEUP)
-			MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)>;
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-};
-
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&musb_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	mode = <3>;
-	power = <50>;
-};
-
-&vaux1 {
-	/* Needed for ads7846 */
-	regulator-name = "vcc";
-};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
deleted file mode 100644
index d310b5c7bac36..0000000000000
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ /dev/null
@@ -1,459 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
- */
-
-#include "omap36xx.dtsi"
-
-/ {
-	model = "INCOstartec LILLY-A83X module (DM3730)";
-	compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3";
-
-	chosen {
-			bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>;   /* 128 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "lilly-a83x::led1";
-			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "lilly-a83x";
-
-		ti,mcbsp = <&mcbsp2>;
-	};
-
-	reg_vcc3: vcc3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_vcc3>;
-		#phy-cells = <0>;
-	};
-};
-
-&omap3_pmx_wkup {
-	pinctrl-names = "default";
-
-	lan9221_pins: pinmux_lan9221_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_129 */
-		>;
-	};
-
-	tsc2048_pins: pinmux_tsc2048_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4)   /* sys_boot6.gpio_8 */
-		>;
-	};
-
-	mmc1cd_pins: pinmux_mmc1cd_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_126 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)   /* uart1_tx.uart1_tx */
-			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)   /* uart1_rts.uart1_rts */
-			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)    /* uart1_cts.uart1_cts */
-			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)    /* uart1_rx.uart1_rx */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)   /* mcbsp3_clkx.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)    /* mcbsp3_fsx.uart2_rx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)    /* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)   /* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_scl.i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_sda.i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
-			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
-		>;
-	};
-
-	hsusb1_pins: pinmux_hsusb1_pins {
-		pinctrl-single,pins = <
-
-			/* GPIO 182 controls USB-Hub reset. But USB-Phy its
-			 * reset can't be controlled. So we clamp this GPIO to
-			 * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
-			 */
-
-			OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcspi2_cs1.gpio_182 */
-		>;
-	};
-
-	hsusb_otg_pins: pinmux_hsusb_otg_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)   /* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)  /* hsusb0_stp.hsusb0_stp */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)   /* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)   /* hsusb0_nxt.hsusb0_nxt */
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)   /* hsusb0_data0.hsusb0_data0 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)   /* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)   /* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)   /* hsusb0_data3.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)   /* hsusb0_data4.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)   /* hsusb0_data5.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)   /* hsusb0_data6.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)   /* hsusb0_data7.hsusb0_data7 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	spi2_pins: pinmux_spi2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_clk.mcspi2_clk */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_simo.mcspi2_simo */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_somi.mcspi2_somi */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0)   /* mcspi2_cs0.mcspi2_cs0 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-
-	hsusb1_2_pins: pinmux_hsusb1_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)  /* etk_clk.hsusb1_stp */
-			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3)   /* etk_ctl.hsusb1_clk */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)   /* etk_d0.hsusb1_data0 */
-			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)   /* etk_d1.hsusb1_data1 */
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)   /* etk_d2.hsusb1_data2 */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)   /* etk_d3.hsusb1_data7 */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)   /* etk_d4.hsusb1_data4 */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)   /* etk_d5.hsusb1_data5 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)   /* etk_d6.hsusb1_data6 */
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)   /* etk_d7.hsusb1_data3 */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)   /* etk_d8.hsusb1_dir */
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)   /* etk_d9.hsusb1_nxt */
-		>;
-	};
-
-	gpio1_pins: pinmux_gpio1_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4)   /* etk_d15.gpio_29 */
-		>;
-	};
-
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio1_pins>;
-};
-
-&gpio6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>;   /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&twl {
-	vmmc1: regulator-vmmc1 {
-		regulator-always-on;
-	};
-
-	vdd1: regulator-vdd1 {
-		regulator-always-on;
-	};
-
-	vdd2: regulator-vdd2 {
-		regulator-always-on;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <2600000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-};
-
-&i2c3 {
-	clock-frequency = <2600000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-		gpiom1: gpio@20 {
-			compatible = "microchip,mcp23017";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0x20>;
-		};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&uart4 {
-	status = "disabled";
-};
-
-&mmc1 {
-	cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
-	cd-inverted;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
-	cap-sdio-irq;
-	cap-sd-highspeed;
-	cap-mmc-highspeed;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mcspi2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins>;
-
-	tsc2046@0 {
-		reg = <0>;   /* CS0 */
-		compatible = "ti,tsc2046";
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 0>;   /* boot6 / gpio_8 */
-		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&reg_vcc3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsc2048_pins>;
-
-		ti,x-min = /bits/ 16 <300>;
-		ti,x-max = /bits/ 16 <3000>;
-		ti,y-min = /bits/ 16 <600>;
-		ti,y-max = /bits/ 16 <3600>;
-		ti,x-plate-ohms = /bits/ 16 <80>;
-		ti,pressure-max = /bits/ 16 <255>;
-		ti,swap-xy;
-
-		wakeup-source;
-	};
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
-
-&usbhshost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_2_pins>;
-	num-ports = <2>;
-	port1-mode = "ehci-phy";
-};
-
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb_otg_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>,
-		<7 0 0x15000000 0x01000000>;
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-		/* no elm on omap3 */
-
-		gpmc,mux-add-data = <0>;
-		gpmc,device-width = <2>;
-		gpmc,wait-pin = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,burst-length = <4>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <100>;
-		gpmc,cs-wr-off-ns = <100>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <100>;
-		gpmc,adv-wr-off-ns = <100>;
-		gpmc,oe-on-ns = <5>;
-		gpmc,oe-off-ns = <75>;
-		gpmc,we-on-ns = <5>;
-		gpmc,we-off-ns = <75>;
-		gpmc,rd-cycle-ns = <100>;
-		gpmc,wr-cycle-ns = <100>;
-		gpmc,access-ns = <60>;
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-delay-ns = <50>;
-		gpmc,wr-data-mux-bus-ns = <75>;
-		gpmc,wr-access-ns = <155>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "MLO";
-			reg = <0 0x80000>;
-		};
-
-		partition@80000 {
-			label = "u-boot";
-			reg = <0x80000 0x1e0000>;
-		};
-
-		partition@260000 {
-			label = "u-boot-environment";
-			reg = <0x260000 0x20000>;
-		};
-
-		partition@280000 {
-			label = "kernel";
-			reg = <0x280000 0x500000>;
-		};
-
-		partition@780000 {
-			label = "filesystem";
-			reg = <0x780000 0xf880000>;
-		};
-	};
-
-	ethernet@7,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		bank-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <10>;
-		gpmc,cs-rd-off-ns = <60>;
-		gpmc,cs-wr-off-ns = <60>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <10>;
-		gpmc,oe-off-ns = <60>;
-		gpmc,we-on-ns = <10>;
-		gpmc,we-off-ns = <60>;
-		gpmc,rd-cycle-ns = <100>;
-		gpmc,wr-cycle-ns = <100>;
-		gpmc,access-ns = <50>;
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <75>;
-		gpmc,wr-data-mux-bus-ns = <15>;
-		gpmc,wr-access-ns = <75>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&reg_vcc3>;
-		vdd33a-supply = <&reg_vcc3>;
-		reg-io-width = <4>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <1 0x2>;
-		reg = <7 0 0xff>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&lan9221_pins>;
-		phy-mode = "mii";
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
deleted file mode 100644
index f6bbea2be54c5..0000000000000
--- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
- */
-/dts-v1/;
-
-#include "omap3-lilly-a83x.dtsi"
-
-/ {
-	model = "INCOstartec LILLY-DBB056 (DM3730)";
-	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap3";
-};
-
-&twl {
-	vaux2: regulator-vaux2 {
-		compatible = "ti,twl4030-vaux2";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_pins>;
-
-	lan9117_pins: pinmux_lan9117_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4)   /* cam_fld.gpio_98 */
-		>;
-	};
-
-	gpio4_pins: pinmux_gpio4_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4)   /* cam_xclkb.gpio_111 -> sja1000 IRQ */
-		>;
-	};
-
-	gpio5_pins: pinmux_gpio5_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x218c, PIN_OUTPUT | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcbsp1_clk.gpio_156 -> enable DSS */
-		>;
-	};
-
-	lcd_pins: pinmux_lcd_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat3.sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat4.sdmmc2_dir_dat0 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat5.sdmmc2_dir_dat1 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat6.sdmmc2_dir_cmd */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)    /* sdmmc2_dat7.sdmmc2_clkin */
-			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_cts_rctx.gpio_163 -> wp */
-			OMAP3_CORE1_IOPAD(0x219c, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_rts_sd.gpio_164 -> cd */
-		>;
-	};
-
-	spi1_pins: pinmux_spi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)   /* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)   /* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)   /* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-};
-
-&gpio4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio4_pins>;
-};
-
-&gpio5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio5_pins>;
-};
-
-&mmc2 {
-	status = "okay";
-	bus-width = <4>;
-	vmmc-supply = <&vmmc1>;
-	cd-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;   /* gpio_164 */
-	wp-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;   /* gpio_163 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	ti,dual-volt;
-};
-
-&mcspi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>,   /* nand assigned by COM a83x */
-		<4 0 0x20000000 0x01000000>,
-		<7 0 0x15000000 0x01000000>;   /* eth assigend by COM a83x */
-
-	ethernet@4,0 {
-		compatible = "smsc,lan9117", "smsc,lan9115";
-		bank-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <10>;
-		gpmc,cs-rd-off-ns = <65>;
-		gpmc,cs-wr-off-ns = <65>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <10>;
-		gpmc,oe-off-ns = <65>;
-		gpmc,we-on-ns = <10>;
-		gpmc,we-off-ns = <65>;
-		gpmc,rd-cycle-ns = <100>;
-		gpmc,wr-cycle-ns = <100>;
-		gpmc,access-ns = <60>;
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <75>;
-		gpmc,wr-data-mux-bus-ns = <15>;
-		gpmc,wr-access-ns = <75>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&reg_vcc3>;
-		vdd33a-supply = <&reg_vcc3>;
-		reg-io-width = <4>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <2 0x2>;
-		reg = <4 0 0xff>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&lan9117_pins>;
-		phy-mode = "mii";
-		smsc,force-internal-phy;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
deleted file mode 100644
index a3cf3f443785f..0000000000000
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * omap3-n9.dts - Device Tree file for Nokia N9
- *
- * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
- */
-
-/dts-v1/;
-
-#include "omap3-n950-n9.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Nokia N9";
-	compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap3";
-};
-
-&i2c2 {
-	smia_1: camera@10 {
-		compatible = "nokia,smia";
-		reg = <0x10>;
-		/* No reset gpio */
-		vana-supply = <&vaux3>;
-		clocks = <&isp 0>;
-		clock-frequency = <9600000>;
-		flash-leds = <&as3645a_flash &as3645a_indicator>;
-		port {
-			smia_1_1: endpoint {
-				link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-				remote-endpoint = <&csi2a_ep>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	ak8975@f {
-		compatible = "asahi-kasei,ak8975";
-		reg = <0x0f>;
-	};
-};
-
-&isp {
-	vdd-csiphy1-supply = <&vaux2>;
-	vdd-csiphy2-supply = <&vaux2>;
-	ports {
-		port@2 {
-			reg = <2>;
-			csi2a_ep: endpoint {
-				remote-endpoint = <&smia_1_1>;
-				clock-lanes = <2>;
-				data-lanes = <1 3>;
-				crc = <1>;
-				lane-polarities = <1 1 1>;
-			};
-		};
-	};
-};
-
-&modem {
-	compatible = "nokia,n9-modem";
-};
-
-&lis302 {
-	st,axis-x = <1>;    /* LIS3_DEV_X */
-	st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
-	st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
-
-	st,min-limit-x = <(-46)>;
-	st,min-limit-y = <3>;
-	st,min-limit-z = <3>;
-
-	st,max-limit-x = <(-3)>;
-	st,max-limit-y = <46>;
-	st,max-limit-z = <46>;
-};
-
-&twl_keypad {
-	linux,keymap = < MATRIX_KEY(6, 8, KEY_VOLUMEUP)
-			 MATRIX_KEY(7, 8, KEY_VOLUMEDOWN)
-			 >;
-};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
deleted file mode 100644
index f9f9eca0c56cc..0000000000000
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ /dev/null
@@ -1,1159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
- * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
- */
-
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/media/video-interfaces.h>
-
-/*
- * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
- * for omap AES HW crypto support. When linux kernel try to access memory of AES
- * blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
- * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
- * crash anymore) omap AES support will be disabled for all Nokia N900 devices.
- * There is "unofficial" version of bootloader which enables AES in L3 firewall
- * but it is not widely used and to prevent kernel crash rather AES is disabled.
- * There is also no runtime detection code if AES is disabled in L3 firewall...
- */
-&aes1_target {
-	status = "disabled";
-};
-
-&aes2_target {
-	status = "disabled";
-};
-
-/ {
-	model = "Nokia N900";
-	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
-
-	aliases {
-		i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		display0 = &lcd;
-		display1 = &tv;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led-heartbeat {
-			label = "debug::sleep";
-			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* 162 */
-			linux,default-trigger = "default-on";
-			pinctrl-names = "default";
-			pinctrl-0 = <&debug_leds>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		camera_lens_cover {
-			label = "Camera Lens Cover";
-			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_CAMERA_LENS_COVER>;
-			linux,can-disable;
-		};
-
-		camera_focus {
-			label = "Camera Focus";
-			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
-			linux,code = <KEY_CAMERA_FOCUS>;
-			linux,can-disable;
-		};
-
-		camera_capture {
-			label = "Camera Capture";
-			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
-			linux,code = <KEY_CAMERA>;
-			linux,can-disable;
-		};
-
-		lock_button {
-			label = "Lock Button";
-			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
-			linux,code = <KEY_SCREENLOCK>;
-			linux,can-disable;
-		};
-
-		keypad_slide {
-			label = "Keypad Slide";
-			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_KEYPAD_SLIDE>;
-			linux,can-disable;
-		};
-
-		proximity_sensor {
-			label = "Proximity Sensor";
-			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_FRONT_PROXIMITY>;
-			linux,can-disable;
-		};
-
-		machine_cover {
-			label = "Machine Cover";
-			gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_MACHINE_COVER>;
-			linux,can-disable;
-		};
-	};
-
-	isp1707: isp1707 {
-		compatible = "nxp,isp1707";
-		nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
-		usb-phy = <&usb2_phy>;
-	};
-
-	tv: connector {
-		compatible = "composite-video-connector";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-	};
-
-	sound: n900-audio {
-		compatible = "nokia,n900-audio";
-
-		nokia,cpu-dai = <&mcbsp2>;
-		nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
-		nokia,headphone-amplifier = <&tpa6130a2>;
-
-		tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
-		jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
-		eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
-		speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	battery: n900-battery {
-		compatible = "nokia,n900-battery";
-		io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
-		io-channel-names = "temp", "bsi", "vbat";
-	};
-
-	pwm9: pwm-9 {
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x00>; /* timer_sys_ck */
-	};
-
-	ir: n900-ir {
-		compatible = "nokia,n900-ir";
-		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
-	};
-
-	rom_rng: rng {
-		compatible = "nokia,n900-rom-rng";
-		clocks = <&rng_ick>;
-		clock-names = "ick";
-	};
-
-	/* controlled (enabled/disabled) directly by bcm2048 and wl1251 */
-	vctcxo: vctcxo {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <38400000>;
-	};
-};
-
-&isp {
-	vdds_csib-supply = <&vaux2>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&camera_pins>;
-
-	ports {
-		port@1 {
-			reg = <1>;
-
-			csi_isp: endpoint {
-				remote-endpoint = <&csi_cam1>;
-				bus-type = <MEDIA_BUS_TYPE_CCP2>;
-				clock-lanes = <1>;
-				data-lanes = <0>;
-				lane-polarity = <0 0>;
-				/* Select strobe = <1> for back camera, <0> for front camera */
-				strobe = <1>;
-			};
-		};
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts */
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
-		>;
-	};
-
-	ethernet_pins: pinmux_ethernet_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpmc_ncs3.gpio_54 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4)		/* dss_data16.gpio_86 */
-			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)		/* uart3_rts_sd.gpio_164 */
-		>;
-	};
-
-	gpmc_pins: pinmux_gpmc_pins {
-		pinctrl-single,pins = <
-
-			/* address lines */
-			OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
-			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
-			OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
-
-			/* data lines, gpmc_d0..d7 not muxable according to TRM */
-			OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
-			OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
-			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
-			OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
-			OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
-			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
-			OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
-			OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
-
-			/*
-			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
-			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
-			 */
-			OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
-			OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
-			>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)		/* i2c2_scl */
-			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)		/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)		/* i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)		/* i2c3_sda */
-		>;
-	};
-
-	debug_leds: pinmux_debug_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 */
-		>;
-	};
-
-	mcspi4_pins: pinmux_mcspi4_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
-			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
-			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
-			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
-		>;
-	};
-
-	acx565akm_pins: pinmux_acx565akm_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
-		>;
-	};
-
-	dss_sdi_pins: pinmux_dss_sdi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
-
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
-		>;
-	};
-
-	wl1251_pins: pinmux_wl1251 {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
-			OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
-		>;
-	};
-
-	ssi_pins: pinmux_ssi {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
-			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
-			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)		/* ssi1_wake_tx (cawake) */
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
-			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
-			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
-			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
-		>;
-	};
-
-	modem_pins: pinmux_modem {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4)		/* gpio 72 => ape_rst_rq */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
-			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
-		>;
-	};
-
-	camera_pins: pinmux_camera {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7)       /* cam_hs */
-			OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7)       /* cam_vs */
-			OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0)       /* cam_xclka */
-			OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7)       /* cam_d4 */
-			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0)        /* cam_d6 */
-			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0)        /* cam_d7 */
-			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0)        /* cam_d8 */
-			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0)        /* cam_d9 */
-			OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7)       /* cam_d10 */
-			OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7)       /* cam_xclkb */
-			OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0)       /* cam_strobe */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <2200000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&vaux1 {
-	regulator-name = "V28";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-	regulator-always-on; /* due to battery cover sensor */
-};
-
-&vaux2 {
-	regulator-name = "VCSI";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-};
-
-&vaux3 {
-	regulator-name = "VMMC2_30";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-};
-
-&vaux4 {
-	regulator-name = "VCAM_ANA_28";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-};
-
-&vmmc1 {
-	regulator-name = "VMMC1";
-	regulator-min-microvolt = <1850000>;
-	regulator-max-microvolt = <3150000>;
-	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-};
-
-&vmmc2 {
-	regulator-name = "V28_A";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-	regulator-always-on; /* due VIO leak to AIC34 VDDs */
-};
-
-&vpll1 {
-	regulator-name = "VPLL";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-	regulator-always-on;
-};
-
-&vpll2 {
-	regulator-name = "VSDI_CSI";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-	regulator-always-on;
-};
-
-&vsim {
-	regulator-name = "VMMC2_IO_18";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-};
-
-&vio {
-	regulator-name = "VIO";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&vintana1 {
-	regulator-name = "VINTANA1";
-	/* fixed to 1500000 */
-	regulator-always-on;
-};
-
-&vintana2 {
-	regulator-name = "VINTANA2";
-	regulator-min-microvolt = <2750000>;
-	regulator-max-microvolt = <2750000>;
-	regulator-always-on;
-};
-
-&vintdig {
-	regulator-name = "VINTDIG";
-	/* fixed to 1500000 */
-	regulator-always-on;
-};
-
-/* First two dma channels are reserved on secure omap3 */
-&sdma {
-	dma-channel-mask = <0xfffffffc>;
-};
-
-&twl {
-	twl_audio: audio {
-		compatible = "ti,twl4030-audio";
-		ti,enable-vibra = <1>;
-	};
-
-	twl_power: power {
-		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
-		ti,use_poweroff;
-	};
-};
-
-&twl_keypad {
-	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
-			 MATRIX_KEY(0x00, 0x01, KEY_O)
-			 MATRIX_KEY(0x00, 0x02, KEY_P)
-			 MATRIX_KEY(0x00, 0x03, KEY_COMMA)
-			 MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
-			 MATRIX_KEY(0x00, 0x06, KEY_A)
-			 MATRIX_KEY(0x00, 0x07, KEY_S)
-
-			 MATRIX_KEY(0x01, 0x00, KEY_W)
-			 MATRIX_KEY(0x01, 0x01, KEY_D)
-			 MATRIX_KEY(0x01, 0x02, KEY_F)
-			 MATRIX_KEY(0x01, 0x03, KEY_G)
-			 MATRIX_KEY(0x01, 0x04, KEY_H)
-			 MATRIX_KEY(0x01, 0x05, KEY_J)
-			 MATRIX_KEY(0x01, 0x06, KEY_K)
-			 MATRIX_KEY(0x01, 0x07, KEY_L)
-
-			 MATRIX_KEY(0x02, 0x00, KEY_E)
-			 MATRIX_KEY(0x02, 0x01, KEY_DOT)
-			 MATRIX_KEY(0x02, 0x02, KEY_UP)
-			 MATRIX_KEY(0x02, 0x03, KEY_ENTER)
-			 MATRIX_KEY(0x02, 0x05, KEY_Z)
-			 MATRIX_KEY(0x02, 0x06, KEY_X)
-			 MATRIX_KEY(0x02, 0x07, KEY_C)
-			 MATRIX_KEY(0x02, 0x08, KEY_F9)
-
-			 MATRIX_KEY(0x03, 0x00, KEY_R)
-			 MATRIX_KEY(0x03, 0x01, KEY_V)
-			 MATRIX_KEY(0x03, 0x02, KEY_B)
-			 MATRIX_KEY(0x03, 0x03, KEY_N)
-			 MATRIX_KEY(0x03, 0x04, KEY_M)
-			 MATRIX_KEY(0x03, 0x05, KEY_SPACE)
-			 MATRIX_KEY(0x03, 0x06, KEY_SPACE)
-			 MATRIX_KEY(0x03, 0x07, KEY_LEFT)
-
-			 MATRIX_KEY(0x04, 0x00, KEY_T)
-			 MATRIX_KEY(0x04, 0x01, KEY_DOWN)
-			 MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
-			 MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
-			 MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
-			 MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
-			 MATRIX_KEY(0x04, 0x08, KEY_F10)
-
-			 MATRIX_KEY(0x05, 0x00, KEY_Y)
-			 MATRIX_KEY(0x05, 0x08, KEY_F11)
-
-			 MATRIX_KEY(0x06, 0x00, KEY_U)
-
-			 MATRIX_KEY(0x07, 0x00, KEY_I)
-			 MATRIX_KEY(0x07, 0x01, KEY_F7)
-			 MATRIX_KEY(0x07, 0x02, KEY_F8)
-			 >;
-};
-
-&twl_gpio {
-	ti,pullups = <0x0>;
-	ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <100000>;
-
-	tlv320aic3x: tlv320aic3x@18 {
-		compatible = "ti,tlv320aic3x";
-		reg = <0x18>;
-		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
-		ai3x-gpio-func = <
-			0 /* AIC3X_GPIO1_FUNC_DISABLED */
-			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
-		>;
-
-		AVDD-supply = <&vmmc2>;
-		DRVDD-supply = <&vmmc2>;
-		IOVDD-supply = <&vio>;
-		DVDD-supply = <&vio>;
-
-		ai3x-micbias-vg = <1>;
-	};
-
-	tlv320aic3x_aux: tlv320aic3x@19 {
-		compatible = "ti,tlv320aic3x";
-		reg = <0x19>;
-		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
-
-		AVDD-supply = <&vmmc2>;
-		DRVDD-supply = <&vmmc2>;
-		IOVDD-supply = <&vio>;
-		DVDD-supply = <&vio>;
-
-		ai3x-micbias-vg = <2>;
-	};
-
-	tsl2563: tsl2563@29 {
-		compatible = "amstaos,tsl2563";
-		reg = <0x29>;
-
-		amstaos,cover-comp-gain = <16>;
-	};
-
-	adp1653: led-controller@30 {
-		compatible = "adi,adp1653";
-		reg = <0x30>;
-		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
-
-		flash {
-			flash-timeout-us = <500000>;
-			flash-max-microamp = <320000>;
-			led-max-microamp = <50000>;
-		};
-		indicator {
-			led-max-microamp = <17500>;
-		};
-	};
-
-	lp5523: lp5523@32 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "national,lp5523";
-		reg = <0x32>;
-		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
-
-		led@0 {
-			reg = <0>;
-			chan-name = "lp5523:kb1";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-			color = <LED_COLOR_ID_WHITE>;
-			function = LED_FUNCTION_KBD_BACKLIGHT;
-		};
-
-		led@1 {
-			reg = <1>;
-			chan-name = "lp5523:kb2";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-			color = <LED_COLOR_ID_WHITE>;
-			function = LED_FUNCTION_KBD_BACKLIGHT;
-		};
-
-		led@2 {
-			reg = <2>;
-			chan-name = "lp5523:kb3";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-			color = <LED_COLOR_ID_WHITE>;
-			function = LED_FUNCTION_KBD_BACKLIGHT;
-		};
-
-		led@3 {
-			reg = <3>;
-			chan-name = "lp5523:kb4";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-			color = <LED_COLOR_ID_WHITE>;
-			function = LED_FUNCTION_KBD_BACKLIGHT;
-		};
-
-		led@4 {
-			reg = <4>;
-			chan-name = "lp5523:b";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-			color = <LED_COLOR_ID_BLUE>;
-			function = LED_FUNCTION_STATUS;
-		};
-
-		led@5 {
-			reg = <5>;
-			chan-name = "lp5523:g";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_STATUS;
-		};
-
-		led@6 {
-			reg = <6>;
-			chan-name = "lp5523:r";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_STATUS;
-		};
-
-		led@7 {
-			reg = <7>;
-			chan-name = "lp5523:kb5";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-			color = <LED_COLOR_ID_WHITE>;
-			function = LED_FUNCTION_KBD_BACKLIGHT;
-		};
-
-		led@8 {
-			reg = <8>;
-			chan-name = "lp5523:kb6";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-			color = <LED_COLOR_ID_WHITE>;
-			function = LED_FUNCTION_KBD_BACKLIGHT;
-		};
-	};
-
-	bq27200: bq27200@55 {
-		compatible = "ti,bq27200";
-		reg = <0x55>;
-		power-supplies = <&bq24150a>;
-	};
-
-	/* Stereo headphone amplifier */
-	tpa6130a2: tpa6130a2@60 {
-		compatible = "ti,tpa6130a2";
-		reg = <0x60>;
-
-		Vdd-supply = <&vmmc2>;
-
-		power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
-	};
-
-	si4713: si4713@63 {
-		compatible = "silabs,si4713";
-		reg = <0x63>;
-
-		interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
-		reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
-		vio-supply = <&vio>;
-		vdd-supply = <&vaux1>;
-	};
-
-	bq24150a: bq24150a@6b {
-		compatible = "ti,bq24150a";
-		reg = <0x6b>;
-
-		ti,current-limit = <100>;
-		ti,weak-battery-voltage = <3400>;
-		ti,battery-regulation-voltage = <4200>;
-		ti,charge-current = <650>;
-		ti,termination-current = <100>;
-		ti,resistor-sense = <68>;
-
-		ti,usb-charger-detection = <&isp1707>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <400000>;
-
-	accelerometer@1d {
-		compatible = "st,lis302dl";
-		reg = <0x1d>;
-
-		vdd-supply = <&vaux1>;
-		vddio-supply = <&vio>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>,
-			     <20 IRQ_TYPE_EDGE_RISING>; /* 181 and 180 */
-
-		mount-matrix =	 "-1",  "0",  "0",
-				  "0",  "1",  "0",
-				  "0",  "0",  "1";
-	};
-
-	cam1: camera@3e {
-		compatible = "toshiba,et8ek8";
-		reg = <0x3e>;
-
-		vana-supply = <&vaux4>;
-
-		clocks = <&isp 0>;
-		clock-names = "extclk";
-		clock-frequency = <9600000>;
-
-		reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
-
-		lens-focus = <&ad5820>;
-
-		port {
-			csi_cam1: endpoint {
-				bus-type = <MEDIA_BUS_TYPE_CCP2>;
-				strobe = <1>;
-				clock-inv = <0>;
-				crc = <1>;
-
-				remote-endpoint = <&csi_isp>;
-			};
-		};
-	};
-
-	/* D/A converter for auto-focus */
-	ad5820: dac@c {
-		compatible = "adi,ad5820";
-		reg = <0x0c>;
-
-		VANA-supply = <&vaux4>;
-
-		#io-channel-cells = <0>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-};
-
-/* most boards use vaux3, only some old versions use vmmc2 instead */
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&vaux3>;
-	vqmmc-supply = <&vsim>;
-	bus-width = <8>;
-	non-removable;
-	no-sdio;
-	no-sd;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&gpmc {
-	ranges = <0 0 0x01000000 0x01000000>,	/* 16 MB for OneNAND */
-		 <1 0 0x02000000 0x01000000>;	/* 16 MB for smc91c96 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmc_pins>;
-
-	/* sys_ndmareq1 could be used by the driver, not as gpio65 though */
-	onenand@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "ti,omap2-onenand";
-		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
-
-		/*
-		 * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
-		 * bootloader set values when booted with v5.1
-		 * (OneNAND Manufacturer: Samsung):
-		 *
-		 *   cs0 GPMC_CS_CONFIG1: 0xfb001202
-		 *   cs0 GPMC_CS_CONFIG2: 0x00111100
-		 *   cs0 GPMC_CS_CONFIG3: 0x00020200
-		 *   cs0 GPMC_CS_CONFIG4: 0x11001102
-		 *   cs0 GPMC_CS_CONFIG5: 0x03101616
-		 *   cs0 GPMC_CS_CONFIG6: 0x90060000
-		 */
-		gpmc,sync-read;
-		gpmc,sync-write;
-		gpmc,burst-length = <16>;
-		gpmc,burst-read;
-		gpmc,burst-wrap;
-		gpmc,burst-write;
-		gpmc,device-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <102>;
-		gpmc,cs-wr-off-ns = <102>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <12>;
-		gpmc,adv-wr-off-ns = <12>;
-		gpmc,oe-on-ns = <12>;
-		gpmc,oe-off-ns = <102>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <102>;
-		gpmc,rd-cycle-ns = <132>;
-		gpmc,wr-cycle-ns = <132>;
-		gpmc,access-ns = <96>;
-		gpmc,page-burst-access-ns = <18>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <6>;
-		gpmc,wr-data-mux-bus-ns = <36>;
-		gpmc,wr-access-ns = <96>;
-		gpmc,sync-clk-ps = <15000>;
-
-		/*
-		 * MTD partition table corresponding to Nokia's
-		 * Maemo 5 (Fremantle) release.
-		 */
-		partition@0 {
-			label = "bootloader";
-			reg = <0x00000000 0x00020000>;
-			read-only;
-		};
-		partition@1 {
-			label = "config";
-			reg = <0x00020000 0x00060000>;
-		};
-		partition@2 {
-			label = "log";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@3 {
-			label = "kernel";
-			reg = <0x000c0000 0x00200000>;
-		};
-		partition@4 {
-			label = "initfs";
-			reg = <0x002c0000 0x00200000>;
-		};
-		partition@5 {
-			label = "rootfs";
-			reg = <0x004c0000 0x0fb40000>;
-		};
-	};
-
-	/* Ethernet is on some early development boards and qemu */
-	ethernet@gpmc {
-		compatible = "smsc,lan91c94";
-		interrupt-parent = <&gpio2>;
-		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;	/* gpio54 */
-		reg = <1 0 0xf>;		/* 16 byte IO range */
-		bank-width = <2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ethernet_pins>;
-		power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;	/* gpio86 */
-		reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* gpio164 */
-		gpmc,device-width = <2>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <48>;
-		gpmc,cs-wr-off-ns = <24>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <0>;
-		gpmc,adv-wr-off-ns = <0>;
-		gpmc,we-on-ns = <12>;
-		gpmc,we-off-ns = <18>;
-		gpmc,oe-on-ns = <12>;
-		gpmc,oe-off-ns = <48>;
-		gpmc,page-burst-access-ns = <0>;
-		gpmc,access-ns = <42>;
-		gpmc,rd-cycle-ns = <180>;
-		gpmc,wr-cycle-ns = <180>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <12>;
-	};
-};
-
-&mcspi1 {
-	/*
-	 * For some reason, touchscreen is necessary for screen to work at
-	 * all on real hw. It works well without it on emulator.
-	 *
-	 * Also... order in the device tree actually matters here.
-	 */
-	tsc2005@0 {
-		compatible = "ti,tsc2005";
-		spi-max-frequency = <6000000>;
-		reg = <0>;
-
-		vio-supply = <&vio>;
-
-		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
-		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
-
-		touchscreen-fuzz-x = <4>;
-		touchscreen-fuzz-y = <7>;
-		touchscreen-fuzz-pressure = <2>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-		touchscreen-max-pressure = <2048>;
-
-		ti,x-plate-ohms = <280>;
-		ti,esd-recovery-timeout-ms = <8000>;
-	};
-
-	lcd: acx565akm@2 {
-		compatible = "sony,acx565akm";
-		spi-max-frequency = <6000000>;
-		reg = <2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&acx565akm_pins>;
-
-		label = "lcd";
-		reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&sdi_out>;
-			};
-		};
-	};
-};
-
-&mcspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi4_pins>;
-
-	wl1251@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl1251_pins>;
-
-		vio-supply = <&vio>;
-
-		compatible = "ti,wl1251";
-		reg = <0>;
-		spi-max-frequency = <48000000>;
-
-		spi-cpol;
-		spi-cpha;
-
-		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
-
-		interrupt-parent = <&gpio2>;
-		interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
-
-		clocks = <&vctcxo>;
-	};
-};
-
-/* RNG not directly accessible on n900, see omap3-rom-rng instead */
-&rng_target {
-	status = "disabled";
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <2>;
-	power = <50>;
-};
-
-&uart1 {
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-
-	bcm2048: bluetooth {
-		compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth";
-		reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */
-		host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
-		bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
-		clocks = <&vctcxo>;
-		clock-names = "sysclk";
-	};
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_sdi_pins>;
-
-	vdds_sdi-supply = <&vaux1>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-
-			sdi_out: endpoint {
-				remote-endpoint = <&lcd_in>;
-				datapairs = <2>;
-			};
-		};
-	};
-};
-
-&venc {
-	status = "okay";
-
-	vdda-supply = <&vdac>;
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&tv_connector_in>;
-			ti,channels = <1>;
-		};
-	};
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&ssi_port1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ssi_pins>;
-
-	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
-
-	modem: hsi-client {
-		compatible = "nokia,n900-modem";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&modem_pins>;
-
-		hsi-channel-ids = <0>, <1>, <2>, <3>;
-		hsi-channel-names = "mcsaab-control",
-				    "speech-control",
-				    "speech-data",
-				    "mcsaab-data";
-		hsi-speed-kbps = <55000>;
-		hsi-mode = "frame";
-		hsi-flow = "synchronized";
-		hsi-arb-mode = "round-robin";
-
-		interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
-
-		gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
-			<&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
-			<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
-			<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
-			<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
-		gpio-names = "cmt_apeslpx",
-			     "cmt_rst_rq",
-			     "cmt_en",
-			     "cmt_rst",
-			     "cmt_bsi";
-	};
-};
-
-&ssi_port2 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
deleted file mode 100644
index f68da828b0505..0000000000000
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ /dev/null
@@ -1,504 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
- *
- * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
- */
-
-#include "omap36xx.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	vemmc: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VEMMC";
-		regulator-min-microvolt = <2900000>;
-		regulator-max-microvolt = <2900000>;
-		gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
-		startup-delay-us = <150>;
-		enable-active-high;
-	};
-
-	vwlan_fixed: fixedregulator2 {
-		compatible = "regulator-fixed";
-		regulator-name = "VWLAN";
-		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
-		enable-active-high;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			label = "debug::sleep";
-			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;  /* gpio92 */
-			linux,default-trigger = "default-on";
-			pinctrl-names = "default";
-			pinctrl-0 = <&debug_leds>;
-		};
-	};
-
-	/* controlled (enabled/disabled) directly by wl1271 */
-	vctcxo: vctcxo {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <38400000>;
-	};
-};
-
-&omap3_pmx_core {
-	accelerator_pins: pinmux_accelerator_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4)	/* mcspi2_somi.gpio_180 -> LIS302 INT1 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4)	/* mcspi2_cs0.gpio_181 -> LIS302 INT2 */
-		>;
-	};
-
-	debug_leds: pinmux_debug_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4)       /* dss_data22.gpio_92 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
-		>;
-	};
-
-	wlan_pins: pinmux_wlan_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */
-			OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */
-		>;
-	};
-
-	ssi_pins: pinmux_ssi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)            /* ssi1_dat_tx */
-			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)            /* ssi1_flag_tx */
-			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1)      /* ssi1_rdy_tx */
-			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)	/* ssi1_wake_tx (cawake) */
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1)             /* ssi1_dat_rx */
-			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1)             /* ssi1_flag_rx */
-			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1)            /* ssi1_rdy_rx */
-			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1)            /* ssi1_wake */
-		>;
-	};
-
-	ssi_pins_idle: pinmux_ssi_pins_idle {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7)            /* ssi1_dat_tx */
-			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7)            /* ssi1_flag_tx */
-			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7)    /* ssi1_rdy_tx */
-			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)	/* ssi1_wake_tx (cawake) */
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7)             /* ssi1_dat_rx */
-			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7)             /* ssi1_flag_rx */
-			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4)            /* ssi1_rdy_rx */
-			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7)            /* ssi1_wake */
-		>;
-	};
-
-	modem_pins1: pinmux_modem_core1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4)	/* gpio_34 (ape_rst_rq) */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4)            /* gpio_88 (cmt_rst_rq) */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4)            /* gpio_93 (cmt_apeslpx) */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts */
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	modem_pins2: pinmux_modem_core2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)         /* gpio_23 (cmt_en) */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2900000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-/include/ "twl4030.dtsi"
-
-&twl {
-	compatible = "ti,twl5031";
-
-	twl_power: power {
-		compatible = "ti,twl4030-power";
-		ti,use_poweroff;
-	};
-};
-
-&twl_gpio {
-	ti,pullups = <0x000001>; /* BIT(0) */
-	ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
-};
-
-&vdac {
-	regulator-name = "vdac";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&vpll1 {
-	regulator-name = "vpll1";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&vpll2 {
-	regulator-name = "vpll2";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&vaux1 {
-	regulator-name = "vaux1";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-/* CSI-2 receiver */
-&vaux2 {
-	regulator-name = "vaux2";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-/* Cameras */
-&vaux3 {
-	regulator-name = "vaux3";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&vaux4 {
-	regulator-name = "vaux4";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&vmmc1 {
-	regulator-name = "vmmc1";
-	regulator-min-microvolt = <1850000>;
-	regulator-max-microvolt = <3150000>;
-};
-
-&vmmc2 {
-	regulator-name = "vmmc2";
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-};
-
-&vintana1 {
-	regulator-name = "vintana1";
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
-};
-
-&vintana2 {
-	regulator-name = "vintana2";
-	regulator-min-microvolt = <2750000>;
-	regulator-max-microvolt = <2750000>;
-};
-
-&vintdig {
-	regulator-name = "vintdig";
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
-};
-
-&vsim {
-	regulator-name = "vsim";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&vio {
-	regulator-name = "vio";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-
-	as3645a@30 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x30>;
-		compatible = "ams,as3645a";
-		as3645a_flash: flash@0 {
-			reg = <0x0>;
-			flash-timeout-us = <150000>;
-			flash-max-microamp = <320000>;
-			led-max-microamp = <60000>;
-			ams,input-max-microamp = <1750000>;
-		};
-		as3645a_indicator: indicator@1 {
-			reg = <0x1>;
-			led-max-microamp = <10000>;
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	lis302: lis302@1d {
-		compatible = "st,lis3lv02d";
-		reg = <0x1d>;
-
-		Vdd-supply = <&vaux1>;
-		Vdd_IO-supply = <&vio>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&accelerator_pins>;
-
-                interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
-
-		/* click flags */
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-
-		/* Limits are 0.5g * value */
-		st,click-threshold-x = <8>;
-		st,click-threshold-y = <8>;
-		st,click-threshold-z = <10>;
-
-		/* Click must be longer than time limit */
-		st,click-time-limit = <9>;
-
-		/* Kind of debounce filter */
-		st,click-latency = <50>;
-
-		st,wakeup-x-hi;
-		st,wakeup-y-hi;
-		st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
-
-		st,wakeup2-z-hi;
-		st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */
-
-		st,highpass-cutoff-hz = <2>;
-
-		/* Interrupt line 1 for thresholds */
-		st,irq1-ff-wu-1;
-		st,irq1-ff-wu-2;
-		/* Interrupt line 2 for click detection */
-		st,irq2-click;
-
-		st,wu-duration-1 = <8>;
-		st,wu-duration-2 = <8>;
-	};
-};
-
-&mmc1 {
-	status = "disabled";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&vemmc>;
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-/* RNG not directly accessible on N950/N9. */
-&rng_target {
-	status = "disabled";
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&gpmc {
-	ranges = <0 0 0x04000000 0x1000000>;	/* CS0: 16MB for OneNAND */
-
-	onenand@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "ti,omap2-onenand";
-		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
-
-		/*
-		 * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
-		 * bootloader set values when booted with v4.19 using both N950
-		 * and N9 devices (OneNAND Manufacturer: Samsung):
-		 *
-		 *   gpmc cs0 before gpmc_cs_program_settings:
-		 *   cs0 GPMC_CS_CONFIG1: 0xfd001202
-		 *   cs0 GPMC_CS_CONFIG2: 0x00181800
-		 *   cs0 GPMC_CS_CONFIG3: 0x00030300
-		 *   cs0 GPMC_CS_CONFIG4: 0x18001804
-		 *   cs0 GPMC_CS_CONFIG5: 0x03171d1d
-		 *   cs0 GPMC_CS_CONFIG6: 0x97080000
-		 */
-		gpmc,sync-read;
-		gpmc,sync-write;
-		gpmc,burst-length = <16>;
-		gpmc,burst-read;
-		gpmc,burst-wrap;
-		gpmc,burst-write;
-		gpmc,device-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <122>;
-		gpmc,cs-wr-off-ns = <122>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <15>;
-		gpmc,adv-wr-off-ns = <15>;
-		gpmc,oe-on-ns = <20>;
-		gpmc,oe-off-ns = <122>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <122>;
-		gpmc,rd-cycle-ns = <148>;
-		gpmc,wr-cycle-ns = <148>;
-		gpmc,access-ns = <117>;
-		gpmc,page-burst-access-ns = <15>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <10>;
-		gpmc,wr-data-mux-bus-ns = <40>;
-		gpmc,wr-access-ns = <117>;
-
-		gpmc,sync-clk-ps = <15000>; /* TBC; Where this value came? */
-
-		/*
-		 * MTD partition table corresponding to Nokia's MeeGo 1.2
-		 * Harmattan release.
-		 */
-		partition@0 {
-			label = "bootloader";
-			reg = <0x00000000 0x00100000>;
-		};
-		partition@1 {
-			label = "config";
-			reg = <0x00100000 0x002c0000>;
-		};
-		partition@2 {
-			label = "kernel";
-			reg = <0x003c0000 0x01000000>;
-		};
-		partition@3 {
-			label = "log";
-			reg = <0x013c0000 0x00200000>;
-		};
-		partition@4 {
-			label = "var";
-			reg = <0x015c0000 0x1ca40000>;
-		};
-		partition@5 {
-			label = "moslo";
-			reg = <0x1e000000 0x02000000>;
-		};
-		partition@6 {
-			label = "omap2-onenand";
-			reg = <0x00000000 0x20000000>;
-		};
-	};
-};
-
-&ssi_port1 {
-	pinctrl-names = "default", "idle";
-	pinctrl-0 = <&ssi_pins>;
-	pinctrl-1 = <&ssi_pins_idle>;
-
-	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
-
-	modem: hsi-client {
-		pinctrl-names = "default";
-		pinctrl-0 = <&modem_pins1 &modem_pins2>;
-
-		hsi-channel-ids = <0>, <1>, <2>, <3>;
-		hsi-channel-names = "mcsaab-control",
-				    "speech-control",
-				    "speech-data",
-				    "mcsaab-data";
-		hsi-speed-kbps = <96000>;
-		hsi-mode = "frame";
-		hsi-flow = "synchronized";
-		hsi-arb-mode = "round-robin";
-
-		interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */
-
-		gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */
-			<&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */
-			<&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */
-		gpio-names = "cmt_apeslpx",
-			     "cmt_rst_rq",
-			     "cmt_en";
-	};
-};
-
-&ssi_port2 {
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-
-	bluetooth {
-		compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth";
-
-		reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* 26 */
-		host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
-		bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
-
-		clocks = <&vctcxo>;
-		clock-names = "sysclk";
-	};
-};
-
-&aes1_target {
-	status = "disabled";
-};
-
-&aes2_target {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
deleted file mode 100644
index cbaf79c4e8422..0000000000000
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ /dev/null
@@ -1,273 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * omap3-n950.dts - Device Tree file for Nokia N950
- *
- * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
- */
-
-/dts-v1/;
-
-#include "omap3-n950-n9.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Nokia N950";
-	compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap3";
-
-	keys {
-		compatible = "gpio-keys";
-
-		keypad_slide {
-			label = "Keypad Slide";
-			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* 109 */
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_KEYPAD_SLIDE>;
-			wakeup-source;
-			pinctrl-names = "default";
-			pinctrl-0 = <&keypad_slide_pins>;
-		};
-	};
-};
-
-&omap3_pmx_core {
-	keypad_slide_pins: pinmux_debug_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)       /* cam_d10.gpio_109 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-	spi4_pins: pinmux_spi4_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
-			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
-			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
-			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-	dsi_pins: pinmux_dsi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE1) /* dsi_dx0 - data0+ */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE1) /* dsi_dy0 - data0- */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE1) /* dsi_dx1 - clk+   */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE1) /* dsi_dy1 - clk-   */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE1) /* dsi_dx2 - data1+ */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE1) /* dsi_dy2 - data1- */
-		>;
-	};
-
-	display_pins: pinmux_display_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20ca, PIN_INPUT | MUX_MODE4) /* gpio 62 - display te */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 - display reset */
-		>;
-	};
-};
-
-&i2c2 {
-	smia_1: camera@10 {
-		compatible = "nokia,smia";
-		reg = <0x10>;
-		/* No reset gpio */
-		vana-supply = <&vaux3>;
-		clocks = <&isp 0>;
-		clock-frequency = <9600000>;
-		flash-leds = <&as3645a_flash &as3645a_indicator>;
-		port {
-			smia_1_1: endpoint {
-				link-frequencies = /bits/ 64 <210000000 333600000 398400000>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-				remote-endpoint = <&csi2a_ep>;
-			};
-		};
-	};
-};
-
-&isp {
-	vdd-csiphy1-supply = <&vaux2>;
-	vdd-csiphy2-supply = <&vaux2>;
-	ports {
-		port@2 {
-			reg = <2>;
-			csi2a_ep: endpoint {
-				remote-endpoint = <&smia_1_1>;
-				clock-lanes = <2>;
-				data-lanes = <3 1>;
-				crc = <1>;
-				lane-polarities = <1 1 1>;
-			};
-		};
-	};
-};
-
-&mcspi4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi4_pins>;
-
-	wlcore: wlcore@0 {
-		compatible = "ti,wl1271";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_pins>;
-		reg = <0>;
-		spi-max-frequency = <48000000>;
-		clock-xtal;
-		ref-clock-frequency = <38400000>;
-		interrupts-extended = <&gpio2 10 IRQ_TYPE_LEVEL_HIGH>; /* gpio 42 */
-		vwlan-supply = <&vwlan_fixed>;
-	};
-};
-
-&modem {
-	compatible = "nokia,n950-modem";
-};
-
-&twl {
-	twl_audio: audio {
-		compatible = "ti,twl4030-audio";
-		ti,enable-vibra = <1>;
-	};
-};
-
-&twl_keypad {
-	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_BACKSLASH)
-			 MATRIX_KEY(0x01, 0x00, KEY_LEFTSHIFT)
-			 MATRIX_KEY(0x02, 0x00, KEY_COMPOSE)
-			 MATRIX_KEY(0x03, 0x00, KEY_LEFTMETA)
-			 MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
-			 MATRIX_KEY(0x05, 0x00, KEY_BACKSPACE)
-			 MATRIX_KEY(0x06, 0x00, KEY_VOLUMEDOWN)
-			 MATRIX_KEY(0x07, 0x00, KEY_VOLUMEUP)
-
-			 MATRIX_KEY(0x03, 0x01, KEY_Z)
-			 MATRIX_KEY(0x04, 0x01, KEY_A)
-			 MATRIX_KEY(0x05, 0x01, KEY_Q)
-			 MATRIX_KEY(0x06, 0x01, KEY_W)
-			 MATRIX_KEY(0x07, 0x01, KEY_E)
-
-			 MATRIX_KEY(0x03, 0x02, KEY_X)
-			 MATRIX_KEY(0x04, 0x02, KEY_S)
-			 MATRIX_KEY(0x05, 0x02, KEY_D)
-			 MATRIX_KEY(0x06, 0x02, KEY_C)
-			 MATRIX_KEY(0x07, 0x02, KEY_V)
-
-			 MATRIX_KEY(0x03, 0x03, KEY_O)
-			 MATRIX_KEY(0x04, 0x03, KEY_I)
-			 MATRIX_KEY(0x05, 0x03, KEY_U)
-			 MATRIX_KEY(0x06, 0x03, KEY_L)
-			 MATRIX_KEY(0x07, 0x03, KEY_APOSTROPHE)
-
-			 MATRIX_KEY(0x03, 0x04, KEY_Y)
-			 MATRIX_KEY(0x04, 0x04, KEY_K)
-			 MATRIX_KEY(0x05, 0x04, KEY_J)
-			 MATRIX_KEY(0x06, 0x04, KEY_H)
-			 MATRIX_KEY(0x07, 0x04, KEY_G)
-
-			 MATRIX_KEY(0x03, 0x05, KEY_B)
-			 MATRIX_KEY(0x04, 0x05, KEY_COMMA)
-			 MATRIX_KEY(0x05, 0x05, KEY_M)
-			 MATRIX_KEY(0x06, 0x05, KEY_N)
-			 MATRIX_KEY(0x07, 0x05, KEY_DOT)
-
-			 MATRIX_KEY(0x00, 0x06, KEY_SPACE)
-			 MATRIX_KEY(0x03, 0x06, KEY_T)
-			 MATRIX_KEY(0x04, 0x06, KEY_UP)
-			 MATRIX_KEY(0x05, 0x06, KEY_LEFT)
-			 MATRIX_KEY(0x06, 0x06, KEY_RIGHT)
-			 MATRIX_KEY(0x07, 0x06, KEY_DOWN)
-
-			 MATRIX_KEY(0x03, 0x07, KEY_P)
-			 MATRIX_KEY(0x04, 0x07, KEY_ENTER)
-			 MATRIX_KEY(0x05, 0x07, KEY_SLASH)
-			 MATRIX_KEY(0x06, 0x07, KEY_F)
-			 MATRIX_KEY(0x07, 0x07, KEY_R)
-			 >;
-};
-
-&lis302 {
-	st,axis-x = <(-2)>; /* LIS3_INV_DEV_Y */
-	st,axis-y = <(-1)>; /* LIS3_INV_DEV_X */
-	st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
-
-	st,min-limit-x = <(-32)>;
-	st,min-limit-y = <3>;
-	st,min-limit-z = <3>;
-
-	st,max-limit-x = <(-3)>;
-	st,max-limit-y = <32>;
-	st,max-limit-z = <32>;
-};
-
-&dss {
-	status = "okay";
-
-	vdda_video-supply = <&vdac>;
-};
-
-&dsi {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dsi_pins>;
-
-	vdd-supply = <&vpll2>;
-
-	port {
-		dsi_out_ep: endpoint {
-			remote-endpoint = <&lcd0_in>;
-			lanes = <2 3 0 1 4 5>;
-		};
-	};
-
-	lcd0: panel@0 {
-		compatible = "nokia,himalaya", "panel-dsi-cm";
-		reg = <0>;
-		label = "lcd0";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&display_pins>;
-
-		vpnl-supply = <&vmmc2>;
-		vddi-supply = <&vio>;
-
-		reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;	/* 87 */
-		te-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;	/* 62 */
-
-		width-mm = <49>; /* 48.960 mm */
-		height-mm = <88>; /* 88.128 mm */
-
-		/* TODO:
-		 * - panel is upside-down
-		 * - top + bottom 5px are not visible
-		 */
-		panel-timing {
-			clock-frequency = <0>;          /* Calculated by dsi */
-
-			hback-porch = <2>;
-			hactive = <480>;
-			hfront-porch = <0>;
-			hsync-len = <2>;
-
-			vback-porch = <1>;
-			vactive = <864>;
-			vfront-porch = <0>;
-			vsync-len = <1>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd0_in: endpoint {
-				remote-endpoint = <&dsi_out_ep>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
deleted file mode 100644
index a6dbbba799b2e..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Alto35 expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-lcd35.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		led-gpio148 {
-			label = "overo:red:gpio148";
-			gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>;		/* gpio 148 */
-		};
-		led-gpio150 {
-			label = "overo:yellow:gpio150";
-			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;		/* gpio 150 */
-		};
-		led-gpio151 {
-			label = "overo:blue:gpio151";
-			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;		/* gpio 151 */
-		};
-		led-gpio170 {
-			label = "overo:green:gpio170";
-			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;		/* gpio 170 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-		button0 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;		/* gpio_10 */
-			wakeup-source;
-		};
-	};
-};
-
-&omap3_pmx_core {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE4)	/* uart1_tx.gpio_148 */
-			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)	/* uart1_cts.gpio_150 */
-			OMAP3_CORE1_IOPAD(0x2182, PIN_OUTPUT | MUX_MODE4)	/* uart1_rx.gpio_151 */
-			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a18, PIN_INPUT | MUX_MODE4)		/* sys_clkout1.gpio_10 */
-		>;
-	};
-};
-
-&usbhshost {
-	status = "disabled";
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-alto35.dts b/arch/arm/boot/dts/omap3-overo-alto35.dts
deleted file mode 100644
index 37c64dd5f6729..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-alto35.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Alto35 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-alto35-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Alto35";
-	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
deleted file mode 100644
index adc714c398257..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ /dev/null
@@ -1,274 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * The Gumstix Overo must be combined with an expansion board.
- */
-
-/ {
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0>;
-	};
-
-	led-controller {
-		compatible = "pwm-leds";
-
-		led-1 {
-			label = "overo:blue:COM";
-			pwms = <&twl_pwmled 1 7812500>;
-			max-brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "overo";
-
-		ti,mcbsp = <&mcbsp2>;
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>;		/* gpio_168: vbus enable */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;	/* gpio_183 */
-		vcc-supply = <&hsusb2_power>;
-		#phy-cells = <0>;
-	};
-
-	/* Regulator to trigger the nPoweron signal of the Wifi module */
-	w3cbw003c_npoweron: regulator-w3cbw003c-npoweron {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-w3cbw003c-npoweron";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;		/* gpio_54: nPoweron */
-		enable-active-high;
-	};
-
-	/* Regulator to trigger the nReset signal of the Wifi module */
-	w3cbw003c_wifi_nreset: regulator-w3cbw003c-wifi-nreset {
-		pinctrl-names = "default";
-		pinctrl-0 = <&w3cbw003c_pins &w3cbw003c_2_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-w3cbw003c-wifi-nreset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;		/* gpio_16: WiFi nReset */
-		startup-delay-us = <10000>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_pins
-	>;
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
-			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_clk.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)	/* mcbsp3_fsx.uart2_rx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl.i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda.i2c1_sda */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	/* WiFi/BT combo */
-	w3cbw003c_pins: pinmux_w3cbw003c_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)		/* gpmc_ncs3.gpio_54 */
-			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)		/* uart3_rts_sd.gpio_164 */
-		>;
-	};
-
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
-			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)		/* i2c2_scl.gpio_168 */
-			OMAP3_CORE1_IOPAD(0x21c0, PIN_OUTPUT | MUX_MODE4)		/* i2c2_sda.gpio_183 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-/* i2c2 pins are used for gpio */
-&i2c2 {
-	status = "disabled";
-};
-
-/* on board microSD slot */
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-};
-
-/* optional on board WiFi */
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&w3cbw003c_npoweron>;
-	vqmmc-supply = <&w3cbw003c_wifi_nreset>;
-	bus-width = <4>;
-	cap-sdio-irq;
-	non-removable;
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 */
-		 <4 0 0x2b000000 0x1000000>,	/* CS4 */
-		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		linux,mtd-name = "micron,mt29c4g96maz";
-		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "SPL";
-			reg = <0 0x80000>; /* 512KiB */
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1C0000>; /* 1792KiB */
-		};
-		partition@1c0000 {
-			label = "Environment";
-			reg = <0x240000 0x40000>; /* 256KiB */
-		};
-		partition@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x800000>; /* 8192KiB */
-		};
-		partition@780000 {
-			label = "Filesystem";
-			reg = <0xA80000 0>;
-			/* HACK: MTDPART_SIZ_FULL=0 so fill to end */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
deleted file mode 100644
index 0d0e62c00916a..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Chestnut43 expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-lcd43.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		led-heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
-			linux,default-trigger = "heartbeat";
-		};
-		led-gpio22 {
-			label = "overo:blue:gpio22";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button0 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			wakeup-source;
-		};
-		button1 {
-			label = "button1";
-			linux,code = <BTN_1>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			wakeup-source;
-		};
-	};
-};
-
-#include "omap-gpmc-smsc9221.dtsi"
-
-&gpmc {
-	ethernet@gpmc {
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
-	};
-};
-
-&lis33de {
-	status = "disabled";
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-chestnut43.dts
deleted file mode 100644
index d147d704b89f1..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-chestnut43.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Chestnut43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-chestnut43-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Chestnut43";
-	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
deleted file mode 100644
index 339a51fa41198..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * DVI output for some Gumstix Overo boards (Tobi and Summit)
- */
-
-&omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-		>;
-	};
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &dvi0;
-	};
-
-	tfp410: encoder {
-		compatible = "ti,tfp410";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
deleted file mode 100644
index c3570acc35fad..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
- */
-
-&omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-		>;
-	};
-
-	lb035_pins: pinmux_lb035_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
-			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs1.mcspi1_cs1 */
-		>;
-	};
-
-	ads7846_pins: pinmux_ads7846_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
-		>;
-	};
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	ads7846reg: ads7846-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "ads7846-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-		
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
-
-		default-on;
-	};
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-
-	lcd0: display@1 {
-		compatible = "lgphilips,lb035q02";
-		label = "lcd35";
-
-		reg = <1>;					/* CS1 */
-		spi-max-frequency = <500000>;
-		spi-cpol;
-		spi-cpha;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lb035_pins>;
-		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;	/* gpio_144 */
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	/* touch controller */
-	ads7846@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ads7846_pins>;
-
-		compatible = "ti,ads7846";
-		vcc-supply = <&ads7846reg>;
-
-		reg = <0>;				/* CS0 */
-		spi-max-frequency = <1500000>;
-
-		interrupt-parent = <&gpio4>;
-		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
-
-		ti,x-min = /bits/ 16 <0x0>;
-		ti,x-max = /bits/ 16 <0x0fff>;
-		ti,y-min = /bits/ 16 <0x0>;
-		ti,y-max = /bits/ 16 <0x0fff>;
-		ti,x-plate-ohms = /bits/ 16 <180>;
-		ti,pressure-max = /bits/ 16 <255>;
-
-		wakeup-source;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
deleted file mode 100644
index d95a0e130058c..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
- */
-
-&omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-		>;
-	};
-
-	lte430_pins: pinmux_lte430_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	ads7846_pins: pinmux_ads7846_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
-		>;
-	};
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	lcd0: display {
-		compatible = "samsung,lte430wq-f0c", "panel-dpi";
-		label = "lcd43";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lte430_pins>;
-		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;		/* gpio_144 */
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-
-		panel-timing {
-			clock-frequency = <9200000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <8>;
-			hback-porch = <4>;
-			hsync-len = <41>;
-			vback-porch = <2>;
-			vfront-porch = <4>;
-			vsync-len = <10>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-	};
-
-	ads7846reg: ads7846-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "ads7846-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-		
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
-
-		default-on;
-	};
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-
-	/* touch controller */
-	ads7846@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ads7846_pins>;
-
-		compatible = "ti,ads7846";
-		vcc-supply = <&ads7846reg>;
-
-		reg = <0>;				/* CS0 */
-		spi-max-frequency = <1500000>;
-
-		interrupt-parent = <&gpio4>;
-		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
-
-		ti,x-min = /bits/ 16 <0x0>;
-		ti,x-max = /bits/ 16 <0x0fff>;
-		ti,y-min = /bits/ 16 <0x0>;
-		ti,y-max = /bits/ 16 <0x0fff>;
-		ti,x-plate-ohms = /bits/ 16 <180>;
-		ti,pressure-max = /bits/ 16 <255>;
-
-		wakeup-source;
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi
deleted file mode 100644
index 8a4a02472c9a3..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Peripherals common to all Gumstix Overo boards (Tobi, Summit, Palo43,...)
- */
-
-/ {
-	lis33_3v3: lis33-3v3-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "lis33-3v3-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	lis33_1v8: lis33-1v8-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "lis33-1v8-reg";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-};
-
-&omap3_pmx_core {
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-	clock-frequency = <100000>;
-
-	/* optional 1K EEPROM with revision information */
-	eeprom@51 {
-		compatible = "atmel,24c01";
-		reg = <0x51>;
-		pagesize = <8>;
-	};
-
-	lis33de: lis33de@1d {
-		compatible = "st,lis33de", "st,lis3lv02d";
-		reg = <0x1d>;
-		Vdd-supply = <&lis33_1v8>;
-		Vdd_IO-supply = <&lis33_3v3>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
deleted file mode 100644
index 5f6721326f86a..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Gallop43 expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-lcd43.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		led-heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
-			linux,default-trigger = "heartbeat";
-		};
-		led-gpio22 {
-			label = "overo:blue:gpio22";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button0 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			wakeup-source;
-		};
-		button1 {
-			label = "button1";
-			linux,code = <BTN_1>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			wakeup-source;
-		};
-	};
-};
-
-&usbhshost {
-	status = "disabled";
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43.dts b/arch/arm/boot/dts/omap3-overo-gallop43.dts
deleted file mode 100644
index 24b40bdf7ea1d..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-gallop43.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Gallop43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-gallop43-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Gallop43";
-	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
deleted file mode 100644
index 4b66f622ac131..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 Ash Charles, Gumstix Inc.
- */
-
-/*
- * Palo35 expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-lcd35.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		led-heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
-			linux,default-trigger = "heartbeat";
-		};
-		led-gpio22 {
-			label = "overo:blue:gpio22";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button0 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			wakeup-source;
-		};
-		button1 {
-			label = "button1";
-			linux,code = <BTN_1>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			wakeup-source;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-overo-palo35.dts b/arch/arm/boot/dts/omap3-overo-palo35.dts
deleted file mode 100644
index 55e08d56b18b3..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-palo35.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 Ash Charles, Gumstix Inc.
- */
-
-/*
- * Palo35 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-palo35-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Palo35";
-	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
deleted file mode 100644
index a8f163a899f03..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Palo43 expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-lcd43.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		led-heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
-			linux,default-trigger = "heartbeat";
-		};
-		led-gpio22 {
-			label = "overo:blue:gpio22";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button0 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			wakeup-source;
-		};
-		button1 {
-			label = "button1";
-			linux,code = <BTN_1>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			wakeup-source;
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-palo43.dts b/arch/arm/boot/dts/omap3-overo-palo43.dts
deleted file mode 100644
index 092c8325a133d..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-palo43.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Palo43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-palo43-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Palo43";
-	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
deleted file mode 100644
index 3eb935df04dcc..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Alto35 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-alto35-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35";
-	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
-};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
deleted file mode 100644
index 3af8d10d72247..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Chestnut43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-chestnut43-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43";
-	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
deleted file mode 100644
index 813e3c9fe3b64..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Gallop43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-gallop43-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43";
-	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
deleted file mode 100644
index 8405bd9262de6..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
- */
-
-/*
- * Palo35 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-palo35-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35";
-	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
deleted file mode 100644
index b9558d736e795..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Palo43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-palo43-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43";
-	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts
deleted file mode 100644
index fcfc449f2abea..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Summit expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-summit-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit";
-	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-		>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
deleted file mode 100644
index 6d14466c180af..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Tobi expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-tobi-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
-	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
deleted file mode 100644
index bcf20ff3f2813..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
- */
-
-/*
- * TobiDuo expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-tobiduo-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo";
-	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
-};
diff --git a/arch/arm/boot/dts/omap3-overo-storm.dtsi b/arch/arm/boot/dts/omap3-overo-storm.dtsi
deleted file mode 100644
index 2af15d5f61f92..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-storm.dtsi
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-#include "omap36xx.dtsi"
-#include "omap3-overo-base.dtsi"
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-
-	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
-		>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
deleted file mode 100644
index ec03ca17e98b9..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Summit expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-dvi.dtsi"
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		led-heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&lis33de {
-	status = "disabled";
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-summit.dts b/arch/arm/boot/dts/omap3-overo-summit.dts
deleted file mode 100644
index a6c9799fe4915..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-summit.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Summit expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-summit-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Summit";
-	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-		>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
deleted file mode 100644
index 5432e4e16ab58..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Tobi expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-dvi.dtsi"
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		led-heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-#include "omap-gpmc-smsc9221.dtsi"
-
-&gpmc {
-	ethernet@gpmc {
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
-	};
-};
-
-&lis33de {
-	status = "disabled";
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi.dts
deleted file mode 100644
index ce3f2404f329c..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-tobi.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- */
-
-/*
- * Tobi expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-tobi-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Tobi";
-	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
deleted file mode 100644
index 218a10c0d8159..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
- */
-
-/*
- * TobiDuo expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-
-#include "omap-gpmc-smsc9221.dtsi"
-
-&gpmc {
-	smsc1: ethernet@gpmc {
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
-	};
-
-	smsc2: ethernet@4,0 {
-		compatible = "smsc,lan9221","smsc,lan9115";
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <42>;
-		gpmc,cs-wr-off-ns = <36>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <12>;
-		gpmc,adv-wr-off-ns = <12>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <42>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <36>;
-		gpmc,rd-cycle-ns = <60>;
-		gpmc,wr-cycle-ns = <54>;
-		gpmc,access-ns = <36>;
-		gpmc,page-burst-access-ns = <0>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <18>;
-		gpmc,wr-access-ns = <42>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
-
-		reg = <4 0 0xff>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 65 */
-	};
-};
-
-&lis33de {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-tobiduo.dts
deleted file mode 100644
index fc6163eae45e8..0000000000000
--- a/arch/arm/boot/dts/omap3-overo-tobiduo.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
- */
-
-/*
- * TobiDuo expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-tobiduo-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on TobiDuo";
-	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
deleted file mode 100644
index cc9263e99254f..0000000000000
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-#include "omap34xx.dtsi"
-#include "omap3-overo-base.dtsi"
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-
-	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
deleted file mode 100644
index c0252f8a798aa..0000000000000
--- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015
- *   Nikolaus Schaller <hns@goldelico.com>
- */
-
-/*
- * device tree for OpenPandora 1GHz with DM3730
- */
-
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "omap3-pandora-common.dtsi"
-
-/ {
-	model = "Pandora Handheld Console 1GHz";
-
-	compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&hsusb2_2_pins
-		&control_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
-			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_ctl.sdmmc3_cmd */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
-		>;
-	};
-
-	control_pins: pinmux_control_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* etk_d0.gpio_14 =  HP_SHUTDOWN */
-			OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4)		/* etk_d1.gpio_15 =  BT_SHUTDOWN */
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 =  RESET_USB_HOST */
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4)		/* etk_d7.gpio_21 =  WIFI IRQ */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)		/* etk_d8.gpio_22 =  MSECURE */
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4)		/* etk_d9.gpio_23 =  WIFI_POWER */
-			OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT | MUX_MODE4)   		/* reserved.gpio_127 = MMC2_WP */
-			OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4)   		/* reserved.gpio_126 = MMC1_WP */
-			OMAP3_WKUP_IOPAD(0x2a58, PIN_OUTPUT | MUX_MODE4)   		/* reserved.gpio_128 = LED_MMC1 */
-			OMAP3_WKUP_IOPAD(0x2a5a, PIN_OUTPUT | MUX_MODE4)   		/* reserved.gpio_129 = LED_MMC2 */
-
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/omap3-pandora-600mhz.dts
deleted file mode 100644
index 6bd9041942f2a..0000000000000
--- a/arch/arm/boot/dts/omap3-pandora-600mhz.dts
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015
- *   Nikolaus Schaller <hns@goldelico.com>
- */
-
-/*
- * device tree for OpenPandora with OMAP3530
- */
-
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "omap3-pandora-common.dtsi"
-
-/ {
-	model = "Pandora Handheld Console";
-
-	compatible = "openpandora,omap3-pandora-600mhz", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&hsusb2_2_pins
-		&control_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
-			OMAP3430_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_ctl.sdmmc3_cmd */
-			OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
-			OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
-			OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
-			OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
-		>;
-	};
-
-	control_pins: pinmux_control_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* etk_d0.gpio_14 =  HP_SHUTDOWN */
-			OMAP3430_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4)		/* etk_d1.gpio_15 =  BT_SHUTDOWN */
-			OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 =  RESET_USB_HOST */
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4)		/* etk_d7.gpio_21 =  WIFI IRQ */
-			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)		/* etk_d8.gpio_22 =  MSECURE */
-			OMAP3430_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4)		/* etk_d9.gpio_23 =  WIFI_POWER */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
deleted file mode 100644
index 4c3b6bab179cc..0000000000000
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ /dev/null
@@ -1,730 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015
- *   Nikolaus Schaller <hns@goldelico.com>
- *
- * Common device tree include for OpenPandora devices.
- */
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	aliases {
-		display0 = &lcd;
-	};
-
-	/* fixed 26MHz oscillator */
-	hfclk_26m: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	tv: connector {
-		compatible = "connector-analog-tv";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-	};
-
-	gpio-leds {
-
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		led1 {
-			label = "pandora::sd1";
-			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* GPIO_128 */
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led2 {
-			label = "pandora::sd2";
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* GPIO_129 */
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-
-		led3 {
-			label = "pandora::bluetooth";
-			gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;	/* GPIO_158 */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led4 {
-			label = "pandora::wifi";
-			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;	/* GPIO_159 */
-			linux,default-trigger = "mmc2";
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-
-		up-button {
-			label = "up";
-			linux,code = <KEY_UP>;
-			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;	/* GPIO_110 */
-			wakeup-source;
-		};
-
-		down-button {
-			label = "down";
-			linux,code = <KEY_DOWN>;
-			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;	/* GPIO_103 */
-			wakeup-source;
-		};
-
-		left-button {
-			label = "left";
-			linux,code = <KEY_LEFT>;
-			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;	/* GPIO_96 */
-			wakeup-source;
-		};
-
-		right-button {
-			label = "right";
-			linux,code = <KEY_RIGHT>;
-			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;	/* GPIO_98 */
-			wakeup-source;
-		};
-
-		pageup-button {
-			label = "game 1";
-			linux,code = <KEY_PAGEUP>;
-			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;	/* GPIO_109 */
-			wakeup-source;
-		};
-
-		pagedown-button {
-			label = "game 3";
-			linux,code = <KEY_PAGEDOWN>;
-			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;	/* GPIO_106 */
-			wakeup-source;
-		};
-
-		home-button {
-			label = "game 4";
-			linux,code = <KEY_HOME>;
-			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;	/* GPIO_101 */
-			wakeup-source;
-		};
-
-		end-button {
-			label = "game 2";
-			linux,code = <KEY_END>;
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;	/* GPIO_111 */
-			wakeup-source;
-		};
-
-		right-shift {
-			label = "l";
-			linux,code = <KEY_RIGHTSHIFT>;
-			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;	/* GPIO_102 */
-			wakeup-source;
-		};
-
-		kp-plus {
-			label = "l2";
-			linux,code = <KEY_KPPLUS>;
-			gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;	/* GPIO_97 */
-			wakeup-source;
-		};
-
-		right-ctrl {
-			label = "r";
-			linux,code = <KEY_RIGHTCTRL>;
-			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;	/* GPIO_105 */
-			wakeup-source;
-		};
-
-		kp-minus {
-			label = "r2";
-			linux,code = <KEY_KPMINUS>;
-			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;	/* GPIO_107 */
-			wakeup-source;
-		};
-
-		left-ctrl {
-			label = "ctrl";
-			linux,code = <KEY_LEFTCTRL>;
-			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;	/* GPIO_104 */
-			wakeup-source;
-		};
-
-		menu {
-			label = "menu";
-			linux,code = <KEY_MENU>;
-			gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;	/* GPIO_99 */
-			wakeup-source;
-		};
-
-		hold {
-			label = "hold";
-			linux,code = <KEY_COFFEE>;
-			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* GPIO_176 */
-			wakeup-source;
-		};
-
-		left-alt {
-			label = "alt";
-			linux,code = <KEY_LEFTALT>;
-			gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;	/* GPIO_100 */
-			wakeup-source;
-		};
-
-		lid {
-			label = "lid";
-			linux,code = <0x00>;    /* SW_LID lid shut */
-			linux,input-type = <0x05>;    /* EV_SW */
-			gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;   /* GPIO_108 */
-		};
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
-		vcc-supply = <&vaux2>;
-		#phy-cells = <0>;
-	};
-
-	/* HS USB Host VBUS supply
-	 * disabling this regulator causes current leakage, and LCD flicker
-	 * on earlier (CC) board revisions, so keep it always on */
-	usb_host_5v: fixed-regulator-usb_host_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_host_5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* GPIO_164 */
-	};
-
-	/* wl1251 wifi+bt module */
-	wlan_en: fixed-regulator-wg7210_en {
-		compatible = "regulator-fixed";
-		regulator-name = "vwlan";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		startup-delay-us = <50000>;
-		enable-active-high;
-		gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-	};
-
-	/* wg7210 (wifi+bt module) 32k clock buffer */
-	wg7210_32k: fixed-regulator-wg7210_32k {
-		compatible = "regulator-fixed";
-		regulator-name = "wg7210_32k";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		enable-active-high;
-		gpio = <&twl_gpio 13 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&omap3_pmx_core {
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat4.sdmmc2_dirdat0 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat5.sdmmc2_dirdat1 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat6.sdmmc2_dircmd */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1)		/* sdmmc2_dat7.sdmmc2_clkin */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* GPIO_157 = lcd reset */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	led_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4)	/* GPIO_128 */
-			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)	/* GPIO_129 */
-			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4)	/* GPIO_158 */
-			OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4)	/* GPIO_159 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4)	/* GPIO_96 */
-			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4)	/* GPIO_97 */
-			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4)	/* GPIO_98 */
-			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4)	/* GPIO_99 */
-			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4)	/* GPIO_100 */
-			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* GPIO_101 */
-			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4)	/* GPIO_102 */
-			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4)	/* GPIO_103 */
-			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4)	/* GPIO_104 */
-			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4)	/* GPIO_105 */
-			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4)	/* GPIO_106 */
-			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4)	/* GPIO_107 */
-			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4)	/* GPIO_108 */
-			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)	/* GPIO_109 */
-			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4)	/* GPIO_110 */
-			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4)	/* GPIO_111 */
-			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)	/* GPIO_176 */
-		>;
-	};
-
-	penirq_pins: pinmux_penirq_pins {
-		pinctrl-single,pins = <
-			/* here we could enable to wakeup the cpu from suspend by a pen touch */
-			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4)	/* GPIO_94 */
-		>;
-	};
-
-};
-
-&omap3_pmx_core2 {
-	/* define in CPU specific file that includes this one
-	 * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD()
-	 */
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		clocks = <&hfclk_26m>;
-		clock-names = "fck";
-
-		twl_power: power {
-			compatible = "ti,twl4030-power-reset";
-			ti,use_poweroff;
-		};
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-
-			codec {
-				ti,ramp_delay_value = <3>;
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&twl_keypad {
-	keypad,num-rows = <8>;
-	keypad,num-columns = <6>;
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_9)
-		MATRIX_KEY(0, 1, KEY_8)
-		MATRIX_KEY(0, 2, KEY_I)
-		MATRIX_KEY(0, 3, KEY_J)
-		MATRIX_KEY(0, 4, KEY_N)
-		MATRIX_KEY(0, 5, KEY_M)
-		MATRIX_KEY(1, 0, KEY_0)
-		MATRIX_KEY(1, 1, KEY_7)
-		MATRIX_KEY(1, 2, KEY_U)
-		MATRIX_KEY(1, 3, KEY_H)
-		MATRIX_KEY(1, 4, KEY_B)
-		MATRIX_KEY(1, 5, KEY_SPACE)
-		MATRIX_KEY(2, 0, KEY_BACKSPACE)
-		MATRIX_KEY(2, 1, KEY_6)
-		MATRIX_KEY(2, 2, KEY_Y)
-		MATRIX_KEY(2, 3, KEY_G)
-		MATRIX_KEY(2, 4, KEY_V)
-		MATRIX_KEY(2, 5, KEY_FN)
-		MATRIX_KEY(3, 0, KEY_O)
-		MATRIX_KEY(3, 1, KEY_5)
-		MATRIX_KEY(3, 2, KEY_T)
-		MATRIX_KEY(3, 3, KEY_F)
-		MATRIX_KEY(3, 4, KEY_C)
-		MATRIX_KEY(4, 0, KEY_P)
-		MATRIX_KEY(4, 1, KEY_4)
-		MATRIX_KEY(4, 2, KEY_R)
-		MATRIX_KEY(4, 3, KEY_D)
-		MATRIX_KEY(4, 4, KEY_X)
-		MATRIX_KEY(5, 0, KEY_K)
-		MATRIX_KEY(5, 1, KEY_3)
-		MATRIX_KEY(5, 2, KEY_E)
-		MATRIX_KEY(5, 3, KEY_S)
-		MATRIX_KEY(5, 4, KEY_Z)
-		MATRIX_KEY(6, 0, KEY_L)
-		MATRIX_KEY(6, 1, KEY_2)
-		MATRIX_KEY(6, 2, KEY_W)
-		MATRIX_KEY(6, 3, KEY_A)
-		MATRIX_KEY(6, 4, KEY_RIGHTBRACE)
-		MATRIX_KEY(7, 0, KEY_ENTER)
-		MATRIX_KEY(7, 1, KEY_1)
-		MATRIX_KEY(7, 2, KEY_Q)
-		MATRIX_KEY(7, 3, KEY_LEFTSHIFT)
-		MATRIX_KEY(7, 4, KEY_LEFTBRACE )
-	 >;
-};
-
-/* backup battery charger */
-&charger {
-	ti,bb-uvolt = <3200000>;
-	ti,bb-uamp = <150>;
-};
-
-/* MMC2 */
-&vmmc2 {
-	regulator-min-microvolt = <1850000>;
-	regulator-max-microvolt = <3150000>;
-};
-
-/* LCD */
-&vaux1 {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-};
-
-/* USB Host PHY */
-&vaux2 {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-/* available on expansion connector */
-&vaux3 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-/* ADS7846 and nubs */
-&vaux4 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-/* power audio DAC and LID sensor */
-&vsim {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-	regulator-always-on;
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	/* no clients so we should disable clock */
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-
-	bq27500@55 {
-		compatible = "ti,bq27500";
-		reg = <0x55>;
-	};
-
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-/*
- * Many pandora boards have been produced with defective write-protect switches
- * on either slot, so it was decided not to use this feature. If you know
- * your board has good switches, feel free to uncomment wp-gpios below.
- */
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
-	/*wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;*/	/* GPIO_126 */
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&vmmc2>;
-	bus-width = <4>;
-	cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
-	/*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/	/* GPIO_127 */
-};
-
-&mmc3 {
-	vmmc-supply = <&wlan_en>;
-
-	bus-width = <4>;
-	non-removable;
-	ti,non-removable;
-	cap-power-off-card;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	wlan: wifi@1 {
-		compatible = "ti,wl1251";
-
-		reg = <1>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_21 */
-
-		ti,wl1251-has-eeprom;
-	};
-};
-
-/* bluetooth*/
-&uart1 {
-};
-
-/* spare (expansion connector) */
-&uart2 {
-};
-
-/* console (expansion connector) */
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "sw";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,device-width = <2>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */
-
-		x-loader@0 {
-			label = "xloader";
-			reg = <0 0x80000>;
-		};
-
-		bootloaders@80000 {
-			label = "uboot";
-			reg = <0x80000 0x1e0000>;
-		};
-
-		bootloaders_env@260000 {
-			label = "uboot-env";
-			reg = <0x260000 0x20000>;
-		};
-
-		kernel@280000 {
-			label = "boot";
-			reg = <0x280000 0xa00000>;
-		};
-
-		filesystem@c80000 {
-			label = "rootfs";
-			reg = <0xc80000 0>;	/* 0 = MTDPART_SIZ_FULL */
-		};
-	};
-};
-
-&mcspi1 {
-	tsc2046@0 {
-		reg = <0>;	/* CS0 */
-		compatible = "ti,tsc2046";
-		spi-max-frequency = <1000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&penirq_pins>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <30 IRQ_TYPE_NONE>;	/* GPIO_94 */
-		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&vaux4>;
-
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <8000>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <4800>;
-		ti,x-plate-ohms = /bits/ 16 <40>;
-		ti,pressure-max = /bits/ 16 <255>;
-
-		wakeup-source;
-	};
-
-	lcd: lcd@1 {
-		reg = <1>;	/* CS1 */
-		compatible = "tpo,td043mtea1";
-		spi-max-frequency = <100000>;
-		spi-cpol;
-		spi-cpha;
-
-		label = "lcd";
-		reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;	/* GPIO_157 */
-		vcc-supply = <&vaux1>;
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-
-};
-
-/* n/a - used as GPIOs */
-&mcbsp1 {
-};
-
-/* audio DAC */
-&mcbsp2 {
-};
-
-/* bluetooth */
-&mcbsp3 {
-};
-
-/* to twl4030*/
-&mcbsp4 {
-};
-
-&venc {
-	status = "okay";
-
-	vdda-supply = <&vdac>;
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&tv_connector_in>;
-			ti,channels = <2>;
-		};
-	};
-};
-
-&dss {
-	pinctrl-names = "default";
-	pinctrl-0 = < &dss_dpi_pins >;
-
-	status = "okay";
-	vdds_dsi-supply = <&vpll2>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
deleted file mode 100644
index 2dbb687d4df2d..0000000000000
--- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common file for omap dpi panels with QVGA and reset pins
- *
- * Note that the board specifc DTS file needs to specify
- * at minimum the GPIO enable-gpios for display, and
- * gpios for gpio-backlight.
- */
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	backlight0: backlight {
-		compatible = "gpio-backlight";
-		default-on;
-	};
-
-	/* 3.3V GPIO controlled regulator for LCD_ENVDD */
-	lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <70000>;
-	};
-
-	lcd0: display {
-		compatible = "sharp,ls037v7dw01";
-		label = "lcd";
-		power-supply = <&lcd_3v3>;
-		envdd-supply = <&lcd_3v3>;
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "okay";
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <18>;
-		};
-	};
-};
-
-&mcspi1 {
-	tsc2046@0 {
-		reg = <0>;			/* CS0 */
-		compatible = "ti,tsc2046";
-		spi-max-frequency = <1000000>;
-		vcc-supply = <&lcd_3v3>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <8000>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <4800>;
-		ti,x-plate-ohms = /bits/ 16 <40>;
-		ti,pressure-max = /bits/ 16 <255>;
-		ti,swap-xy;
-		wakeup-source;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
deleted file mode 100644
index 5ec0893415e03..0000000000000
--- a/arch/arm/boot/dts/omap3-sb-t35.dtsi
+++ /dev/null
@@ -1,138 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
- */
-
-/ {
-	tfp410: encoder {
-		compatible = "ti,tfp410";
-
-		powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;  /* gpio_54 */
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tfp410_pins>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: dvi-connector {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	audio_amp: audio_amp {
-		compatible = "regulator-fixed";
-		regulator-name = "audio_amp";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sb_t35_audio_amp>;
-		gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;   /* gpio_61 */
-		regulator-always-on;
-	};
-};
-
-&omap3_pmx_core {
-	smsc2_pins: pinmux_smsc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs4.gpmc_ncs4 */
-			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_wait3.gpio_65 */
-		>;
-	};
-
-	tfp410_pins: pinmux_tfp410_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs3.gpio_54 */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
-		>;
-	};
-
-	sb_t35_audio_amp: pinmux_sb_t35_audio_amp {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */
-		>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <400000>;
-
-	at24@50 {
-		compatible = "atmel,24c02";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-};
-
-&gpmc {
-	ranges = <4 0 0x2d000000 0x01000000>;
-
-	smsc2: ethernet@4,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc2_pins>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		reg = <4 0 0xff>;
-		bank-width = <2>;
-		gpmc,device-width = <1>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		gpmc,cs-on-ns = <5>;
-		gpmc,cs-rd-off-ns = <150>;
-		gpmc,cs-wr-off-ns = <150>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <15>;
-		gpmc,adv-wr-off-ns = <40>;
-		gpmc,oe-on-ns = <45>;
-		gpmc,oe-off-ns = <140>;
-		gpmc,we-on-ns = <45>;
-		gpmc,we-off-ns = <140>;
-		gpmc,rd-cycle-ns = <155>;
-		gpmc,wr-cycle-ns = <155>;
-		gpmc,access-ns = <120>;
-		gpmc,page-burst-access-ns = <20>;
-		gpmc,bus-turnaround-ns = <75>;
-		gpmc,cycle2cycle-delay-ns = <75>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,wr-access-ns = <0>;
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts
deleted file mode 100644
index a69d328604219..0000000000000
--- a/arch/arm/boot/dts/omap3-sbc-t3517.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Suppport for CompuLab SBC-T3517 with CM-T3517
- */
-
-#include "omap3-cm-t3517.dts"
-#include "omap3-sb-t35.dtsi"
-
-/ {
-	model = "CompuLab SBC-T3517 with CM-T3517";
-	compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
-
-	aliases {
-		display0 = &dvi0;
-		display1 = &tv0;
-	};
-
-	/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
-	vddvario: regulator-vddvario-sb-t35 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddvario";
-		regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a-sb-t35 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&sb_t35_usb_hub_pins
-			&usb_hub_pins
-		    >;
-
-	mmc1_aux_pins: pinmux_mmc1_aux_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59   */
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
-		>;
-	};
-
-	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
-		>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&mmc1_pins
-		&mmc1_aux_pins
-	>;
-
-	wp-gpios =  <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
-	cd-gpios =  <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
-};
-
-&dss {
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&gpmc {
-	ranges = <4 0 0x2d000000 0x01000000>,	/* SB-T35 SMSC9x Eth */
-		 <0 0 0x00000000 0x01000000>;	/* CM-T3x NAND */
-};
diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts
deleted file mode 100644
index 24bf3fd86641f..0000000000000
--- a/arch/arm/boot/dts/omap3-sbc-t3530.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Suppport for CompuLab SBC-T3530 with CM-T3530
- */
-
-#include "omap3-cm-t3530.dts"
-#include "omap3-sb-t35.dtsi"
-
-/ {
-	model = "CompuLab SBC-T3530 with CM-T3530";
-	compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
-
-	aliases {
-		display0 = &dvi0;
-		display1 = &tv0;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sb_t35_usb_hub_pins>;
-
-	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
-		>;
-	};
-};
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x01000000>,	/* CM-T3x30 SMSC9x Eth */
-		 <4 0 0x2d000000 0x01000000>,	/* SB-T35 SMSC9x Eth */
-		 <0 0 0x00000000 0x01000000>;	/* CM-T3x NAND */
-};
-
-&mmc1 {
-	cd-gpios =  <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
-};
-
-&dss {
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts
deleted file mode 100644
index 4c36bde62491d..0000000000000
--- a/arch/arm/boot/dts/omap3-sbc-t3730.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Suppport for CompuLab SBC-T3730 with CM-T3730
- */
-
-#include "omap3-cm-t3730.dts"
-#include "omap3-sb-t35.dtsi"
-
-/ {
-	model = "CompuLab SBC-T3730 with CM-T3730";
-	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3";
-
-	aliases {
-		display0 = &dvi0;
-		display1 = &tv0;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sb_t35_usb_hub_pins>;
-
-	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
-		>;
-	};
-};
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x01000000>,	/* CM-T3x30 SMSC9x Eth */
-		 <4 0 0x2d000000 0x01000000>,	/* SB-T35 SMSC9x Eth */
-		 <0 0 0x00000000 0x01000000>;	/* CM-T3x NAND */
-};
-
-&dss {
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts
deleted file mode 100644
index 0591af4941847..0000000000000
--- a/arch/arm/boot/dts/omap3-sniper.dts
+++ /dev/null
@@ -1,251 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015-2016 Paul Kocialkowski <contact@paulk.fr>
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "LG Optimus Black";
-	compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx */
-		>;
-	};
-
-	dp3t_sel_pins: pinmux_dp3t_sel_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4)	/* gpio_161 */
-			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* gpio_162 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
-			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	lp8720_en_pin: pinmux_lp8720_en_pin {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4)	/* gpio_37 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0)	/* sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0)	/* sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0)	/* sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat4 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat5 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat6 */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat7 */
-		>;
-	};
-
-	usb_otg_hs_pins: pinmux_usb_otg_hs_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt */
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	pinctrl-names = "default";
-
-	mmc1_cd_pin: pinmux_mmc1_cd_pin {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4)		/* gpio_10 */
-		>;
-	};
-};
-
-&gpio2 {
-	ti,no-reset-on-init;
-};
-
-&gpio5 {
-	ti,no-reset-on-init;
-};
-
-&gpio6 {
-	ti,no-reset-on-init;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins &dp3t_sel_pins>;
-
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		power {
-			compatible = "ti,twl4030-power";
-			ti,use_poweroff;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <400000>;
-
-	lp8720@7d {
-		pinctrl-names = "default";
-		pinctrl-0 = <&lp8720_en_pin>;
-
-		compatible = "ti,lp8720";
-		reg = <0x7d>;
-
-		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio_37 */
-
-		lp8720_ldo1: ldo1 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins &mmc1_cd_pin>;
-
-	vmmc-supply = <&lp8720_ldo1>;
-	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio 10 */
-	bus-width = <4>;
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-
-	vmmc-supply = <&vmmc2>;
-	ti,non-removable;
-	bus-width = <8>;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb_otg_hs_pins>;
-
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&twl_keypad {
-	linux,keymap = <
-		MATRIX_KEY(0x00, 0x00, KEY_VOLUMEUP)
-		MATRIX_KEY(0x01, 0x00, KEY_VOLUMEDOWN)
-		MATRIX_KEY(0x02, 0x00, KEY_SELECT)
-	>;
-};
-
-/*
- * The TWL4030 VAUX2 and VDAC regulators power sensors that are slaves on I2C3.
- * When not powered, these sensors cause the I2C3 clock to stay low at all times,
- * making it impossible to reach other devices on I2C3.
- */
-
-&vaux2 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-	regulator-always-on;
-};
-
-&vdac {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
deleted file mode 100644
index 7f440d11f7e75..0000000000000
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ /dev/null
@@ -1,336 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-
-/* Secure omaps have some devices inaccessible depending on the firmware */
-&aes1_target {
-	status = "disabled";
-};
-
-&aes2_target {
-	status = "disabled";
-};
-
-&sham {
-	status = "disabled";
-};
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;	/* gpio_162 */
-		vcc-supply = <&hsusb2_power>;
-		#phy-cells = <0>;
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "omap3beagle";
-
-		/* McBSP2 is used for onboard sound, same as on beagle */
-		ti,mcbsp = <&mcbsp2>;
-	};
-
-	/* Regulator to enable/switch the vcc of the Wifi module */
-	mmc2_sdio_poweron: regulator-mmc2-sdio-poweron {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-mmc2-sdio-poweron";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-		gpio = <&gpio5 29 GPIO_ACTIVE_LOW>;		/* gpio_157 */
-		startup-delay-us = <10000>;
-	};
-};
-
-&omap3_pmx_core {
-	hsusbb2_pins: pinmux_hsusbb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3_CORE1_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3_CORE1_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3_CORE1_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3_CORE1_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
-			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
-			OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
-			OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	/* wlan GPIO output for WLAN_EN */
-	wlan_gpio: pinmux_wlan_gpio {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_fsr gpio_157 */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	mcspi3_pins: pinmux_mcspi3_pins {
-		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1)	/* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */
-                        OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1)	/* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */
-                        OMAP3_CORE1_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE1)	/* etk_d2.mcspi3_cs0 gpio16 INPUT | MODE1 */
-                        OMAP3_CORE1_IOPAD(0x25e2, PIN_INPUT | MUX_MODE1)	/* etk_d3.mcspi3_clk gpio17 INPUT | MODE1 */
-		>;
-	};
-
-	mcbsp3_pins: pinmux_mcbsp3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0)	/* mcbsp3_dx.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0)	/* mcbsp3_dr.uart2_rts */
-			OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0)	/* mcbsp3_clk.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0)	/* mcbsp3_fsx.uart2_rx */
-		>;
-	};
-};
-
-/* McBSP1: mux'ed with GPIO158 as clock for HA-DSP */
-&mcbsp1 {
-	status = "disabled";
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-};
-
-&mcspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi3_pins>;
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	vqmmc-supply = <&vsim>;
-	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
-	bus-width = <8>;
-};
-
-// WiFi (Marvell 88W8686) on MMC2/SDIO
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&mmc2_sdio_poweron>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&twl_gpio {
-	ti,use-leds;
-	/* pullups: BIT(1) */
-	ti,pullups = <0x000002>;
-	/*
-	 * pulldowns:
-	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
-	 * BIT(15), BIT(16), BIT(17)
-	 */
-	ti,pulldowns = <0x03a1c4>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&mcbsp3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp3_pins>;
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x01000000>;	/* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;	/* GPMC_DEVWIDTH_16BIT */
-		ti,nand-ecc-opt = "sw";
-
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <36>;
-		gpmc,cs-wr-off-ns = <36>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <24>;
-		gpmc,adv-wr-off-ns = <36>;
-		gpmc,oe-on-ns = <6>;
-		gpmc,oe-off-ns = <48>;
-		gpmc,we-on-ns = <6>;
-		gpmc,we-off-ns = <30>;
-		gpmc,rd-cycle-ns = <72>;
-		gpmc,wr-cycle-ns = <72>;
-		gpmc,access-ns = <54>;
-		gpmc,wr-access-ns = <30>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		x-loader@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-
-		bootloaders@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1e0000>;
-		};
-
-		bootloaders_env@260000 {
-			label = "U-Boot Env";
-			reg = <0x260000 0x20000>;
-		};
-
-		kernel@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x400000>;
-		};
-
-		filesystem@680000 {
-			label = "File System";
-			reg = <0x680000 0xf980000>;
-		};
-	};
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&vaux2 {
-	regulator-name = "vdd_ehci";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts
deleted file mode 100644
index d82cab8e213a6..0000000000000
--- a/arch/arm/boot/dts/omap3-thunder.dts
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- */
-
-#include "omap3-tao3530.dtsi"
-
-/ {
-	model = "TI OMAP3 Thunder baseboard with TAO3530 SOM";
-	compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
-};
-
-&omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-		>;
-	};
-
-	lte430_pins: pinmux_lte430_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 */
-		>;
-	};
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	lcd0: display {
-		compatible = "samsung,lte430wq-f0c", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lte430_pins>;
-		enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 */
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <3>;
-			hback-porch = <2>;
-			hsync-len = <42>;
-			vback-porch = <2>;
-			vfront-porch = <3>;
-			vsync-len = <11>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-		gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 */
-
-		default-on;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
deleted file mode 100644
index ab52e8d68f760..0000000000000
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ /dev/null
@@ -1,231 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "omap-zoom-common.dtsi"
-
-/ {
-	model = "TI Zoom3";
-	compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	vddvario: regulator-vddvario {
-		compatible = "regulator-fixed";
-		regulator-name = "vddvario";
-		regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&omap3_pmx_core {
-	/* REVISIT: twl gpio0 is mmc0_cd */
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 WLAN IRQ */
-			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.sdmmc3_cmd */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
-			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
-			OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	/* wl12xx GPIO output for WLAN_EN */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	mmc3_2_pins: pinmux_mmc3_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	wlan_host_wkup: pinmux_wlan_host_wkup_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * TVP5146 Video decoder-in for analog input support.
-	 */
-	tvp5146@5c {
-		compatible = "ti,tvp5146m2";
-		reg = <0x5c>;
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vqmmc-supply = <&vsim>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-/*
-&mmc2 {
-	vmmc-supply = <&vmmc2>;
-	ti,non-removable;
-	bus-width = <8>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-*/
-&mmc3 {
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 162 */
-		ref-clock-frequency = <26000000>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&uart4 {
-	status = "disabled";
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	mode = <3>;
-	power = <50>;
-};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
deleted file mode 100644
index 92cd4c99dae72..0000000000000
--- a/arch/arm/boot/dts/omap3.dtsi
+++ /dev/null
@@ -1,1039 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP3 SoC
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-/ {
-	compatible = "ti,omap3430", "ti,omap3";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		mmc0 = &mmc1;
-		mmc1 = &mmc2;
-		mmc2 = &mmc3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0x0>;
-
-			clocks = <&dpll1_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-	};
-
-	pmu@54000000 {
-		compatible = "arm,cortex-a8-pmu";
-		reg = <0x54000000 0x800000>;
-		interrupts = <3>;
-		ti,hwmods = "debugss";
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-
-		iva: iva {
-			compatible = "ti,iva2.2";
-			ti,hwmods = "iva";
-
-			dsp {
-				compatible = "ti,omap3-c64";
-			};
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the OMAP3 interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp@68000000 {
-		compatible = "ti,omap3-l3-smx", "simple-bus";
-		reg = <0x68000000 0x10000>;
-		interrupts = <9 10>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		l4_core: l4@48000000 {
-			compatible = "ti,omap3-l4-core", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48000000 0x1000000>;
-
-			scm: scm@2000 {
-				compatible = "ti,omap3-scm", "simple-bus";
-				reg = <0x2000 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x2000 0x2000>;
-
-				omap3_pmx_core: pinmux@30 {
-					compatible = "ti,omap3-padconf",
-						     "pinctrl-single";
-					reg = <0x30 0x238>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					#interrupt-cells = <1>;
-					interrupt-controller;
-					pinctrl-single,register-width = <16>;
-					pinctrl-single,function-mask = <0xff1f>;
-				};
-
-				scm_conf: scm_conf@270 {
-					compatible = "syscon", "simple-bus";
-					reg = <0x270 0x330>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x270 0x330>;
-
-					pbias_regulator: pbias_regulator@2b0 {
-						compatible = "ti,pbias-omap3", "ti,pbias-omap";
-						reg = <0x2b0 0x4>;
-						syscon = <&scm_conf>;
-						pbias_mmc_reg: pbias_mmc_omap2430 {
-							regulator-name = "pbias_mmc_omap2430";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3000000>;
-						};
-					};
-
-					scm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				scm_clockdomains: clockdomains {
-				};
-
-				omap3_pmx_wkup: pinmux@a00 {
-					compatible = "ti,omap3-padconf",
-						     "pinctrl-single";
-					reg = <0xa00 0x5c>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					#interrupt-cells = <1>;
-					interrupt-controller;
-					pinctrl-single,register-width = <16>;
-					pinctrl-single,function-mask = <0xff1f>;
-				};
-			};
-		};
-
-		aes1_target: target-module@480a6000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x480a6044 0x4>,
-			      <0x480a6048 0x4>,
-			      <0x480a604c 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&aes1_ick>;
-			clock-names = "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x480a6000 0x2000>;
-
-			aes1: aes1@0 {
-				compatible = "ti,omap3-aes";
-				reg = <0 0x50>;
-				interrupts = <0>;
-				dmas = <&sdma 9 &sdma 10>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		aes2_target: target-module@480c5000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x480c5044 0x4>,
-			      <0x480c5048 0x4>,
-			      <0x480c504c 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&aes2_ick>;
-			clock-names = "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x480c5000 0x2000>;
-
-			aes2: aes2@0 {
-				compatible = "ti,omap3-aes";
-				reg = <0 0x50>;
-				interrupts = <0>;
-				dmas = <&sdma 65 &sdma 66>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		prm: prm@48306000 {
-			compatible = "ti,omap3-prm";
-			reg = <0x48306000 0x4000>;
-			interrupts = <11>;
-
-			prm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prm_clockdomains: clockdomains {
-			};
-		};
-
-		cm: cm@48004000 {
-			compatible = "ti,omap3-cm";
-			reg = <0x48004000 0x4000>;
-
-			cm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm_clockdomains: clockdomains {
-			};
-		};
-
-		target-module@48320000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x48320000 0x4>,
-			      <0x48320004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			clocks = <&wkup_32k_fck>, <&omap_32ksync_ick>;
-			clock-names = "fck", "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48320000 0x1000>;
-
-			counter32k: counter@0 {
-				compatible = "ti,omap-counter32k";
-				reg = <0x0 0x20>;
-			};
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,omap3-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		target-module@48056000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x48056000 0x4>,
-			      <0x4805602c 0x4>,
-			      <0x48056028 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, core_l3_clkdm */
-			clocks = <&core_l3_ick>;
-			clock-names = "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48056000 0x1000>;
-
-			sdma: dma-controller@0 {
-				compatible = "ti,omap3430-sdma", "ti,omap-sdma";
-				reg = <0x0 0x1000>;
-				interrupts = <12>,
-					     <13>,
-					     <14>,
-					     <15>;
-				#dma-cells = <1>;
-				dma-channels = <32>;
-				dma-requests = <96>;
-			};
-		};
-
-		gpio1: gpio@48310000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x48310000 0x200>;
-			interrupts = <29>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@49050000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49050000 0x200>;
-			interrupts = <30>;
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@49052000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49052000 0x200>;
-			interrupts = <31>;
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio@49054000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49054000 0x200>;
-			interrupts = <32>;
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio5: gpio@49056000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49056000 0x200>;
-			interrupts = <33>;
-			ti,hwmods = "gpio5";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio@49058000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49058000 0x200>;
-			interrupts = <34>;
-			ti,hwmods = "gpio6";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap3-uart";
-			reg = <0x4806a000 0x2000>;
-			interrupts-extended = <&intc 72>;
-			dmas = <&sdma 49 &sdma 50>;
-			dma-names = "tx", "rx";
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap3-uart";
-			reg = <0x4806c000 0x400>;
-			interrupts-extended = <&intc 73>;
-			dmas = <&sdma 51 &sdma 52>;
-			dma-names = "tx", "rx";
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@49020000 {
-			compatible = "ti,omap3-uart";
-			reg = <0x49020000 0x400>;
-			interrupts-extended = <&intc 74>;
-			dmas = <&sdma 53 &sdma 54>;
-			dma-names = "tx", "rx";
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap3-i2c";
-			reg = <0x48070000 0x80>;
-			interrupts = <56>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap3-i2c";
-			reg = <0x48072000 0x80>;
-			interrupts = <57>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-		};
-
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap3-i2c";
-			reg = <0x48060000 0x80>;
-			interrupts = <61>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-		};
-
-		mailbox: mailbox@48094000 {
-			compatible = "ti,omap3-mailbox";
-			ti,hwmods = "mailbox";
-			reg = <0x48094000 0x200>;
-			interrupts = <26>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <2>;
-			ti,mbox-num-fifos = <2>;
-			mbox_dsp: mbox-dsp {
-				ti,mbox-tx = <0 0 0>;
-				ti,mbox-rx = <1 0 0>;
-			};
-		};
-
-		mcspi1: spi@48098000 {
-			compatible = "ti,omap2-mcspi";
-			reg = <0x48098000 0x100>;
-			interrupts = <65>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi1";
-			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mcspi2: spi@4809a000 {
-			compatible = "ti,omap2-mcspi";
-			reg = <0x4809a000 0x100>;
-			interrupts = <66>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi2";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		mcspi3: spi@480b8000 {
-			compatible = "ti,omap2-mcspi";
-			reg = <0x480b8000 0x100>;
-			interrupts = <91>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi3";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>,
-			       <&sdma 16>,
-			       <&sdma 23>,
-			       <&sdma 24>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		mcspi4: spi@480ba000 {
-			compatible = "ti,omap2-mcspi";
-			reg = <0x480ba000 0x100>;
-			interrupts = <48>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi4";
-			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
-			dma-names = "tx0", "rx0";
-		};
-
-		hdqw1w: 1w@480b2000 {
-			compatible = "ti,omap3-1w";
-			reg = <0x480b2000 0x1000>;
-			interrupts = <58>;
-			ti,hwmods = "hdq1w";
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap3-hsmmc";
-			reg = <0x4809c000 0x200>;
-			interrupts = <83>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap3-hsmmc";
-			reg = <0x480b4000 0x200>;
-			interrupts = <86>;
-			ti,hwmods = "mmc2";
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc3: mmc@480ad000 {
-			compatible = "ti,omap3-hsmmc";
-			reg = <0x480ad000 0x200>;
-			interrupts = <94>;
-			ti,hwmods = "mmc3";
-			dmas = <&sdma 77>, <&sdma 78>;
-			dma-names = "tx", "rx";
-		};
-
-		mmu_isp: mmu@480bd400 {
-			#iommu-cells = <0>;
-			compatible = "ti,omap2-iommu";
-			reg = <0x480bd400 0x80>;
-			interrupts = <24>;
-			ti,hwmods = "mmu_isp";
-			ti,#tlb-entries = <8>;
-		};
-
-		mmu_iva: mmu@5d000000 {
-			#iommu-cells = <0>;
-			compatible = "ti,omap2-iommu";
-			reg = <0x5d000000 0x80>;
-			interrupts = <28>;
-			ti,hwmods = "mmu_iva";
-			status = "disabled";
-		};
-
-		wdt2: wdt@48314000 {
-			compatible = "ti,omap3-wdt";
-			reg = <0x48314000 0x80>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		mcbsp1: mcbsp@48074000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x48074000 0xff>;
-			reg-names = "mpu";
-			interrupts = <16>, /* OCP compliant interrupt */
-				     <59>, /* TX interrupt */
-				     <60>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp1";
-			dmas = <&sdma 31>,
-			       <&sdma 32>;
-			dma-names = "tx", "rx";
-			clocks = <&mcbsp1_fck>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		/* Likely needs to be tagged disabled on HS devices */
-		rng_target: target-module@480a0000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x480a003c 0x4>,
-			      <0x480a0040 0x4>,
-			      <0x480a0044 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			ti,syss-mask = <1>;
-			clocks = <&rng_ick>;
-			clock-names = "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x480a0000 0x2000>;
-
-			rng: rng@0 {
-				compatible = "ti,omap2-rng";
-				reg = <0x0 0x2000>;
-				interrupts = <52>;
-			};
-		};
-
-		mcbsp2: mcbsp@49022000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x49022000 0xff>,
-			      <0x49028000 0xff>;
-			reg-names = "mpu", "sidetone";
-			interrupts = <17>, /* OCP compliant interrupt */
-				     <62>, /* TX interrupt */
-				     <63>, /* RX interrupt */
-				     <4>;  /* Sidetone */
-			interrupt-names = "common", "tx", "rx", "sidetone";
-			ti,buffer-size = <1280>;
-			ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
-			dmas = <&sdma 33>,
-			       <&sdma 34>;
-			dma-names = "tx", "rx";
-			clocks = <&mcbsp2_fck>, <&mcbsp2_ick>;
-			clock-names = "fck", "ick";
-			status = "disabled";
-		};
-
-		mcbsp3: mcbsp@49024000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x49024000 0xff>,
-			      <0x4902a000 0xff>;
-			reg-names = "mpu", "sidetone";
-			interrupts = <22>, /* OCP compliant interrupt */
-				     <89>, /* TX interrupt */
-				     <90>, /* RX interrupt */
-				     <5>;  /* Sidetone */
-			interrupt-names = "common", "tx", "rx", "sidetone";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
-			dmas = <&sdma 17>,
-			       <&sdma 18>;
-			dma-names = "tx", "rx";
-			clocks = <&mcbsp3_fck>, <&mcbsp3_ick>;
-			clock-names = "fck", "ick";
-			status = "disabled";
-		};
-
-		mcbsp4: mcbsp@49026000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x49026000 0xff>;
-			reg-names = "mpu";
-			interrupts = <23>, /* OCP compliant interrupt */
-				     <54>, /* TX interrupt */
-				     <55>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp4";
-			dmas = <&sdma 19>,
-			       <&sdma 20>;
-			dma-names = "tx", "rx";
-			clocks = <&mcbsp4_fck>;
-			clock-names = "fck";
-			#sound-dai-cells = <0>;
-			status = "disabled";
-		};
-
-		mcbsp5: mcbsp@48096000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x48096000 0xff>;
-			reg-names = "mpu";
-			interrupts = <27>, /* OCP compliant interrupt */
-				     <81>, /* TX interrupt */
-				     <82>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp5";
-			dmas = <&sdma 21>,
-			       <&sdma 22>;
-			dma-names = "tx", "rx";
-			clocks = <&mcbsp5_fck>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		sham: sham@480c3000 {
-			compatible = "ti,omap3-sham";
-			ti,hwmods = "sham";
-			reg = <0x480c3000 0x64>;
-			interrupts = <49>;
-			dmas = <&sdma 69>;
-			dma-names = "rx";
-		};
-
-		timer1_target: target-module@48318000 {
-			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			reg = <0x48318000 0x4>,
-			      <0x48318010 0x4>,
-			      <0x48318014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&gpt1_fck>, <&gpt1_ick>;
-			clock-names = "fck", "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48318000 0x1000>;
-
-			timer1: timer@0 {
-				compatible = "ti,omap3430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&gpt1_fck>;
-				clock-names = "fck";
-				interrupts = <37>;
-				ti,timer-alwon;
-			};
-		};
-
-		timer2_target: target-module@49032000 {
-			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			reg = <0x49032000 0x4>,
-			      <0x49032010 0x4>,
-			      <0x49032014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&gpt2_fck>, <&gpt2_ick>;
-			clock-names = "fck", "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x49032000 0x1000>;
-
-			timer2: timer@0 {
-				compatible = "ti,omap3430-timer";
-				reg = <0 0x400>;
-				interrupts = <38>;
-			};
-		};
-
-		timer3: timer@49034000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49034000 0x400>;
-			interrupts = <39>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@49036000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49036000 0x400>;
-			interrupts = <40>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@49038000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49038000 0x400>;
-			interrupts = <41>;
-			ti,hwmods = "timer5";
-			ti,timer-dsp;
-		};
-
-		timer6: timer@4903a000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x4903a000 0x400>;
-			interrupts = <42>;
-			ti,hwmods = "timer6";
-			ti,timer-dsp;
-		};
-
-		timer7: timer@4903c000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x4903c000 0x400>;
-			interrupts = <43>;
-			ti,hwmods = "timer7";
-			ti,timer-dsp;
-		};
-
-		timer8: timer@4903e000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x4903e000 0x400>;
-			interrupts = <44>;
-			ti,hwmods = "timer8";
-			ti,timer-pwm;
-			ti,timer-dsp;
-		};
-
-		timer9: timer@49040000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49040000 0x400>;
-			interrupts = <45>;
-			ti,hwmods = "timer9";
-			ti,timer-pwm;
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48086000 0x400>;
-			interrupts = <46>;
-			ti,hwmods = "timer10";
-			ti,timer-pwm;
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48088000 0x400>;
-			interrupts = <47>;
-			ti,hwmods = "timer11";
-			ti,timer-pwm;
-		};
-
-		timer12_target: target-module@48304000 {
-			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			reg = <0x48304000 0x4>,
-			      <0x48304010 0x4>,
-			      <0x48304014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&gpt12_fck>, <&gpt12_ick>;
-			clock-names = "fck", "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48304000 0x1000>;
-
-			timer12: timer@0 {
-				compatible = "ti,omap3430-timer";
-				reg = <0 0x400>;
-				interrupts = <95>;
-				ti,timer-alwon;
-				ti,timer-secure;
-			};
-		};
-
-		usbhstll: usbhstll@48062000 {
-			compatible = "ti,usbhs-tll";
-			reg = <0x48062000 0x1000>;
-			interrupts = <78>;
-			ti,hwmods = "usb_tll_hs";
-		};
-
-		usbhshost: usbhshost@48064000 {
-			compatible = "ti,usbhs-host";
-			reg = <0x48064000 0x400>;
-			ti,hwmods = "usb_host_hs";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbhsohci: ohci@48064400 {
-				compatible = "ti,ohci-omap3";
-				reg = <0x48064400 0x400>;
-				interrupts = <76>;
-				remote-wakeup-connected;
-			};
-
-			usbhsehci: ehci@48064800 {
-				compatible = "ti,ehci-omap";
-				reg = <0x48064800 0x400>;
-				interrupts = <77>;
-			};
-		};
-
-		gpmc: gpmc@6e000000 {
-			compatible = "ti,omap3430-gpmc";
-			ti,hwmods = "gpmc";
-			reg = <0x6e000000 0x02d0>;
-			interrupts = <20>;
-			dmas = <&sdma 4>;
-			dma-names = "rxtx";
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		usb_otg_target: target-module@480ab000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x480ab400 0x4>,
-			      <0x480ab404 0x4>,
-			      <0x480ab408 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Clock defined in the SoC specific dtsi file */
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x480ab000 0x1000>;
-
-			usb_otg_hs: usb@0 {
-				compatible = "ti,omap3-musb";
-				reg = <0 0x1000>;
-				interrupts = <92>, <93>;
-				interrupt-names = "mc", "dma";
-				multipoint = <1>;
-				num-eps = <16>;
-				ram-bits = <12>;
-			};
-		};
-
-		dss: dss@48050000 {
-			compatible = "ti,omap3-dss";
-			reg = <0x48050000 0x200>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&dss1_alwon_fck>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc@48050400 {
-				compatible = "ti,omap3-dispc";
-				reg = <0x48050400 0x400>;
-				interrupts = <25>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&dss1_alwon_fck>;
-				clock-names = "fck";
-			};
-
-			dsi: encoder@4804fc00 {
-				compatible = "ti,omap3-dsi";
-				reg = <0x4804fc00 0x200>,
-				      <0x4804fe00 0x40>,
-				      <0x4804ff00 0x20>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <25>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi1";
-				clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
-				clock-names = "fck", "sys_clk";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			rfbi: encoder@48050800 {
-				compatible = "ti,omap3-rfbi";
-				reg = <0x48050800 0x100>;
-				status = "disabled";
-				ti,hwmods = "dss_rfbi";
-				clocks = <&dss1_alwon_fck>, <&dss_ick>;
-				clock-names = "fck", "ick";
-			};
-
-			venc: encoder@48050c00 {
-				compatible = "ti,omap3-venc";
-				reg = <0x48050c00 0x100>;
-				status = "disabled";
-				ti,hwmods = "dss_venc";
-				clocks = <&dss_tv_fck>;
-				clock-names = "fck";
-			};
-		};
-
-		ssi: ssi-controller@48058000 {
-			compatible = "ti,omap3-ssi";
-			ti,hwmods = "ssi";
-
-			status = "disabled";
-
-			reg = <0x48058000 0x1000>,
-			      <0x48059000 0x1000>;
-			reg-names = "sys",
-				    "gdd";
-
-			interrupts = <71>;
-			interrupt-names = "gdd_mpu";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			ssi_port1: ssi-port@4805a000 {
-				compatible = "ti,omap3-ssi-port";
-
-				reg = <0x4805a000 0x800>,
-				      <0x4805a800 0x800>;
-				reg-names = "tx",
-					    "rx";
-
-				interrupts = <67>,
-					     <68>;
-			};
-
-			ssi_port2: ssi-port@4805b000 {
-				compatible = "ti,omap3-ssi-port";
-
-				reg = <0x4805b000 0x800>,
-				      <0x4805b800 0x800>;
-				reg-names = "tx",
-					    "rx";
-
-				interrupts = <69>,
-					     <70>;
-			};
-		};
-	};
-};
-
-#include "omap3xxx-clocks.dtsi"
-
-/* Preferred always-on timer for clockevent. Some boards must use dmtimer12 */
-&timer1_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt1_fck>;
-		assigned-clock-parents = <&omap_32k_fck>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
deleted file mode 100644
index 258ecd9e45198..0000000000000
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ /dev/null
@@ -1,195 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-
-/ {
-	model = "TI OMAP3430 SDP";
-	compatible = "ti,omap3430-sdp", "ti,omap3430", "ti,omap3";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vqmmc-supply = <&vsim>;
-	/*
-	 * S6-3 must be in ON position for 8 bit mode to function
-	 * Else, use 4 bit mode
-	 */
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&gpmc {
-	ranges = <0 0 0x10000000 0x08000000>,
-		 <1 0 0x28000000 0x1000000>,	/* CS1: 16MB for NAND */
-		 <2 0 0x20000000 0x1000000>;	/* CS2: 16MB for OneNAND */
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		linux,mtd-name = "intel,pf48f6000m0y1be";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x08000000>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
-		partition@0 {
-			label = "bootloader-nor";
-			reg = <0 0x40000>;
-		};
-		partition@40000 {
-			label = "params-nor";
-			reg = <0x40000 0x40000>;
-		};
-		partition@80000 {
-			label = "kernel-nor";
-			reg = <0x80000 0x200000>;
-		};
-		partition@280000 {
-			label = "filesystem-nor";
-			reg = <0x240000 0x7d80000>;
-		};
-	};
-
-	nand@1,0 {
-		compatible = "ti,omap2-nand";
-		reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,mt29f1g08abb";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ti,nand-ecc-opt = "sw";
-		nand-bus-width = <8>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <36>;
-		gpmc,cs-wr-off-ns = <36>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <24>;
-		gpmc,adv-wr-off-ns = <36>;
-		gpmc,oe-on-ns = <6>;
-		gpmc,oe-off-ns = <48>;
-		gpmc,we-on-ns = <6>;
-		gpmc,we-off-ns = <30>;
-		gpmc,rd-cycle-ns = <72>;
-		gpmc,wr-cycle-ns = <72>;
-		gpmc,access-ns = <54>;
-		gpmc,wr-access-ns = <30>;
-
-		partition@0 {
-			label = "xloader-nand";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "bootloader-nand";
-			reg = <0x80000 0x140000>;
-		};
-		partition@1c0000 {
-			label = "params-nand";
-			reg = <0x1c0000 0xc0000>;
-		};
-		partition@280000 {
-			label = "kernel-nand";
-			reg = <0x280000 0x500000>;
-		};
-		partition@780000 {
-			label = "filesystem-nand";
-			reg = <0x780000 0x7880000>;
-		};
-	};
-
-	onenand@2,0 {
-		linux,mtd-name = "samsung,kfm2g16q2m-deb8";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "ti,omap2-onenand";
-		reg = <2 0 0x20000>;	/* CS2, offset 0, IO size 4 */
-
-		gpmc,device-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <84>;
-		gpmc,cs-wr-off-ns = <72>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-wr-off-ns = <18>;
-		gpmc,oe-on-ns = <30>;
-		gpmc,oe-off-ns = <84>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <42>;
-		gpmc,rd-cycle-ns = <108>;
-		gpmc,wr-cycle-ns = <96>;
-		gpmc,access-ns = <78>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-
-		partition@0 {
-			label = "xloader-onenand";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "bootloader-onenand";
-			reg = <0x80000 0x40000>;
-		};
-		partition@c0000 {
-			label = "params-onenand";
-			reg = <0xc0000 0x20000>;
-		};
-		partition@e0000 {
-			label = "kernel-onenand";
-			reg = <0xe0000 0x200000>;
-		};
-		partition@2e0000 {
-			label = "filesystem-onenand";
-			reg = <0x2e0000 0xfd20000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
deleted file mode 100644
index 24adfac26be04..0000000000000
--- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi
+++ /dev/null
@@ -1,233 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP3430 ES1 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&cm_clocks {
-	gfx_l3_ck: gfx_l3_ck@b10 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0b10>;
-		ti,bit-shift = <0>;
-	};
-
-	gfx_l3_fck: gfx_l3_fck@b40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l3_ick>;
-		ti,max-div = <7>;
-		reg = <0x0b40>;
-		ti,index-starts-at-one;
-	};
-
-	gfx_l3_ick: gfx_l3_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&gfx_l3_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gfx_cg1_ck: gfx_cg1_ck@b00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&gfx_l3_fck>;
-		reg = <0x0b00>;
-		ti,bit-shift = <1>;
-	};
-
-	gfx_cg2_ck: gfx_cg2_ck@b00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&gfx_l3_fck>;
-		reg = <0x0b00>;
-		ti,bit-shift = <2>;
-	};
-
-	clock@a00 {
-		compatible = "ti,clksel";
-		reg = <0xa00>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		d2d_26m_fck: clock-d2d-26m-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "d2d_26m_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <3>;
-		};
-
-		fshostusb_fck: clock-fshostusb-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "fshostusb_fck";
-			clocks = <&core_48m_fck>;
-			ti,bit-shift = <5>;
-		};
-
-		ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1 {
-			#clock-cells = <0>;
-			compatible = "ti,composite-no-wait-gate-clock";
-			clock-output-names = "ssi_ssr_gate_fck_3430es1";
-			clocks = <&corex2_fck>;
-			ti,bit-shift = <0>;
-		};
-	};
-
-	clock@a40 {
-		compatible = "ti,clksel";
-		reg = <0xa40>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1 {
-			#clock-cells = <0>;
-			compatible = "ti,composite-divider-clock";
-			clock-output-names = "ssi_ssr_div_fck_3430es1";
-			clocks = <&corex2_fck>;
-			ti,bit-shift = <8>;
-			ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-		};
-
-		usb_l4_div_ick: clock-usb-l4-div-ick {
-			#clock-cells = <0>;
-			compatible = "ti,composite-divider-clock";
-			clock-output-names = "usb_l4_div_ick";
-			clocks = <&l4_ick>;
-			ti,bit-shift = <4>;
-			ti,max-div = <1>;
-			ti,index-starts-at-one;
-		};
-	};
-
-	ssi_ssr_fck: ssi_ssr_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>;
-	};
-
-	ssi_sst_fck: ssi_sst_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&ssi_ssr_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	clock@a10 {
-		compatible = "ti,clksel";
-		reg = <0xa10>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1 {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-no-wait-interface-clock";
-			clock-output-names = "hsotgusb_ick_3430es1";
-			clocks = <&core_l3_ick>;
-			ti,bit-shift = <4>;
-		};
-
-		fac_ick: clock-fac-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "fac_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <8>;
-		};
-
-		ssi_ick: clock-ssi-ick-3430es1 {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-no-wait-interface-clock";
-			clock-output-names = "ssi_ick_3430es1";
-			clocks = <&ssi_l4_ick>;
-			ti,bit-shift = <0>;
-		};
-
-		usb_l4_gate_ick: clock-usb-l4-gate-ick {
-			#clock-cells = <0>;
-			compatible = "ti,composite-interface-clock";
-			clock-output-names = "usb_l4_gate_ick";
-			clocks = <&l4_ick>;
-			ti,bit-shift = <5>;
-		};
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	usb_l4_ick: usb_l4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
-	};
-
-	clock@e00 {
-		compatible = "ti,clksel";
-		reg = <0xe00>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		dss1_alwon_fck: clock-dss1-alwon-fck-3430es1 {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "dss1_alwon_fck_3430es1";
-			clocks = <&dpll4_m4x2_ck>;
-			ti,bit-shift = <0>;
-			ti,set-rate-parent;
-		};
-	};
-
-	dss_ick: dss_ick_3430es1@e10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x0e10>;
-		ti,bit-shift = <0>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es1>;
-	};
-
-	gfx_3430es1_clkdm: gfx_3430es1_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gfx_l3_ck>, <&gfx_cg1_ck>, <&gfx_cg2_ck>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
-			 <&dss1_alwon_fck>, <&dss_ick>;
-	};
-
-	d2d_clkdm: d2d_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&d2d_26m_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&fshostusb_fck>, <&fac_ick>, <&ssi_ick>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
deleted file mode 100644
index 8374532f20e2b..0000000000000
--- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
+++ /dev/null
@@ -1,310 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP34XX/OMAP36XX clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&cm_clocks {
-	security_l4_ick2: security_l4_ick2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	clock@a14 {
-		compatible = "ti,clksel";
-		reg = <0xa14>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		aes1_ick: clock-aes1-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "aes1_ick";
-			clocks = <&security_l4_ick2>;
-			ti,bit-shift = <3>;
-		};
-
-		rng_ick: clock-rng-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "rng_ick";
-			clocks = <&security_l4_ick2>;
-			ti,bit-shift = <2>;
-		};
-
-		sha11_ick: clock-sha11-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "sha11_ick";
-			clocks = <&security_l4_ick2>;
-			ti,bit-shift = <1>;
-		};
-
-		des1_ick: clock-des1-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "des1_ick";
-			clocks = <&security_l4_ick2>;
-			ti,bit-shift = <0>;
-		};
-
-		pka_ick: clock-pka-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "pka_ick";
-			clocks = <&security_l3_ick>;
-			ti,bit-shift = <4>;
-		};
-	};
-
-	/* CM_FCLKEN_CAM */
-	clock@f00 {
-		compatible = "ti,clksel";
-		reg = <0xf00>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		cam_mclk: clock-cam-mclk {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "cam_mclk";
-			clocks = <&dpll4_m5x2_ck>;
-			ti,bit-shift = <0>;
-			ti,set-rate-parent;
-		};
-
-		csi2_96m_fck: clock-csi2-96m-fck {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "csi2_96m_fck";
-			clocks = <&core_96m_fck>;
-			ti,bit-shift = <1>;
-		};
-	};
-
-	cam_ick: cam_ick@f10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x0f10>;
-		ti,bit-shift = <0>;
-	};
-
-	security_l3_ick: security_l3_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	clock@a10 {
-		compatible = "ti,clksel";
-		reg = <0xa10>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		icr_ick: clock-icr-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "icr_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <29>;
-		};
-
-		des2_ick: clock-des2-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "des2_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <26>;
-		};
-
-		mspro_ick: clock-mspro-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mspro_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <23>;
-		};
-
-		mailboxes_ick: clock-mailboxes-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mailboxes_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <7>;
-		};
-
-		sad2d_ick: clock-sad2d-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "sad2d_ick";
-			clocks = <&l3_ick>;
-			ti,bit-shift = <3>;
-		};
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	clock@c00 {
-		compatible = "ti,clksel";
-		reg = <0xc00>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		sr1_fck: clock-sr1-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "sr1_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <6>;
-		};
-
-		sr2_fck: clock-sr2-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "sr2_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <7>;
-		};
-	};
-
-	sr_l4_ick: sr_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll2_fck: dpll2_fck@40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <19>;
-		ti,max-div = <7>;
-		reg = <0x0040>;
-		ti,index-starts-at-one;
-	};
-
-	dpll2_ck: dpll2_ck@4 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-clock";
-		clocks = <&sys_ck>, <&dpll2_fck>;
-		reg = <0x0004>, <0x0024>, <0x0040>, <0x0034>;
-		ti,low-power-stop;
-		ti,lock;
-		ti,low-power-bypass;
-	};
-
-	dpll2_m2_ck: dpll2_m2_ck@44 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0044>;
-		ti,index-starts-at-one;
-	};
-
-	iva2_ck: iva2_ck@0 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&dpll2_m2_ck>;
-		reg = <0x0000>;
-		ti,bit-shift = <0>;
-	};
-
-	clock@a00 {
-		compatible = "ti,clksel";
-		reg = <0xa00>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		modem_fck: clock-modem-fck {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "modem_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <31>;
-		};
-
-		mspro_fck: clock-mspro-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "mspro_fck";
-			clocks = <&core_96m_fck>;
-			ti,bit-shift = <23>;
-		};
-	};
-
-	/* CM_ICLKEN3_CORE */
-	clock@a18 {
-		compatible = "ti,clksel";
-		reg = <0xa18>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		mad2d_ick: clock-mad2d-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mad2d_ick";
-			clocks = <&l3_ick>;
-			ti,bit-shift = <3>;
-		};
-	};
-
-};
-
-&cm_clockdomains {
-	cam_clkdm: cam_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cam_ick>, <&csi2_96m_fck>;
-	};
-
-	iva2_clkdm: iva2_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&iva2_ck>;
-	};
-
-	dpll2_clkdm: dpll2_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll2_ck>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
-			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
-			 <&gpt1_ick>, <&sr1_fck>, <&sr2_fck>;
-	};
-
-	d2d_clkdm: d2d_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&modem_fck>, <&sad2d_ick>, <&mad2d_ick>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>,
-			 <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>,
-			 <&rng_ick>, <&mspro_fck>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
deleted file mode 100644
index 9dbf62797f0f9..0000000000000
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ /dev/null
@@ -1,198 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP34xx/OMAP35xx SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/media/omap3-isp.h>
-
-#include "omap3.dtsi"
-
-/ {
-	cpus {
-		cpu: cpu@0 {
-			/* OMAP343x/OMAP35xx variants OPP1-6 */
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			clock-latency = <300000>; /* From legacy driver */
-			#cooling-cells = <2>;
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2-ti-cpu";
-		syscon = <&scm_conf>;
-
-		opp1-125000000 {
-			opp-hz = /bits/ 64 <125000000>;
-			/*
-			 * we currently only select the max voltage from table
-			 * Table 3-3 of the omap3530 Data sheet (SPRS507F).
-			 * Format is: <target min max>
-			 */
-			opp-microvolt = <975000 975000 975000>;
-			/*
-			 * first value is silicon revision bit mask
-			 * second one 720MHz Device Identification bit mask
-			 */
-			opp-supported-hw = <0xffffffff 3>;
-		};
-
-		opp2-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <1075000 1075000 1075000>;
-			opp-supported-hw = <0xffffffff 3>;
-			opp-suspend;
-		};
-
-		opp3-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <1200000 1200000 1200000>;
-			opp-supported-hw = <0xffffffff 3>;
-		};
-
-		opp4-550000000 {
-			opp-hz = /bits/ 64 <550000000>;
-			opp-microvolt = <1275000 1275000 1275000>;
-			opp-supported-hw = <0xffffffff 3>;
-		};
-
-		opp5-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1350000 1350000 1350000>;
-			opp-supported-hw = <0xffffffff 3>;
-		};
-
-		opp6-720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1350000 1350000 1350000>;
-			/* only high-speed grade omap3530 devices */
-			opp-supported-hw = <0xffffffff 2>;
-			turbo-mode;
-		};
-	};
-
-	ocp@68000000 {
-		omap3_pmx_core2: pinmux@480025d8 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x480025d8 0x24>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pinctrl-cells = <1>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		isp: isp@480bc000 {
-			compatible = "ti,omap3-isp";
-			reg = <0x480bc000 0x12fc
-			       0x480bd800 0x017c>;
-			interrupts = <24>;
-			iommus = <&mmu_isp>;
-			syscon = <&scm_conf 0x6c>;
-			ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
-			#clock-cells = <1>;
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		bandgap: bandgap@48002524 {
-			reg = <0x48002524 0x4>;
-			compatible = "ti,omap34xx-bandgap";
-			#thermal-sensor-cells = <0>;
-		};
-
-		target-module@480cb000 {
-			compatible = "ti,sysc-omap3430-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_core";
-			reg = <0x480cb024 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>;
-			clocks = <&sr2_fck>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x480cb000 0x001000>;
-
-			smartreflex_core: smartreflex@0 {
-				compatible = "ti,omap3-smartreflex-core";
-				reg = <0 0x400>;
-				interrupts = <19>;
-			};
-		};
-
-		target-module@480c9000 {
-			compatible = "ti,sysc-omap3430-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_mpu_iva";
-			reg = <0x480c9024 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>;
-			clocks = <&sr1_fck>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x480c9000 0x001000>;
-
-			smartreflex_mpu_iva: smartreflex@480c9000 {
-				compatible = "ti,omap3-smartreflex-mpu-iva";
-				reg = <0 0x400>;
-				interrupts = <18>;
-			};
-		};
-
-		/*
-		 * On omap34xx the OCP registers do not seem to be accessible
-		 * at all unlike on 36xx. Maybe SGX is permanently set to
-		 * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
-		 * write-only at 0x50000e10. We detect SGX based on the SGX
-		 * revision register instead of the unreadable OCP revision
-		 * register. Also note that on early 34xx es1 revision there
-		 * are also different clocks, but we do not have any dts users
-		 * for it.
-		 */
-		sgx_module: target-module@50000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x50000014 0x4>;
-			reg-names = "rev";
-			clocks = <&sgx_fck>, <&sgx_ick>;
-			clock-names = "fck", "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x50000000 0x4000>;
-
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
-		};
-	};
-
-	thermal_zones: thermal-zones {
-		#include "omap3-cpu-thermal.dtsi"
-	};
-};
-
-&ssi {
-	status = "okay";
-
-	clocks = <&ssi_ssr_fck>,
-		 <&ssi_sst_fck>,
-		 <&ssi_ick>;
-	clock-names = "ssi_ssr_fck",
-		      "ssi_sst_fck",
-		      "ssi_ick";
-};
-
-&usb_otg_target {
-	clocks = <&hsotgusb_ick_3430es2>;
-};
-
-/include/ "omap34xx-omap36xx-clocks.dtsi"
-/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
deleted file mode 100644
index dcc5cfcd1fe66..0000000000000
--- a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP36xx/AM35xx/OMAP34xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&prm_clocks {
-	corex2_d3_fck: corex2_d3_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&corex2_fck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	corex2_d5_fck: corex2_d5_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&corex2_fck>;
-		clock-mult = <1>;
-		clock-div = <5>;
-	};
-};
-&cm_clocks {
-	dpll5_ck: dpll5_ck@d04 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d04>, <0x0d24>, <0x0d4c>, <0x0d34>;
-		ti,low-power-stop;
-		ti,lock;
-	};
-
-	dpll5_m2_ck: dpll5_m2_ck@d50 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll5_ck>;
-		ti,max-div = <31>;
-		reg = <0x0d50>;
-		ti,index-starts-at-one;
-	};
-
-	sgx_gate_fck: sgx_gate_fck@b00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0b00>;
-	};
-
-	core_d3_ck: core_d3_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	core_d4_ck: core_d4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	core_d6_ck: core_d6_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <6>;
-	};
-
-	omap_192m_alwon_fck: omap_192m_alwon_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	core_d2_ck: core_d2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	sgx_mux_fck: sgx_mux_fck@b40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_d3_ck>, <&core_d4_ck>, <&core_d6_ck>, <&cm_96m_fck>, <&omap_192m_alwon_fck>, <&core_d2_ck>, <&corex2_d3_fck>, <&corex2_d5_fck>;
-		reg = <0x0b40>;
-	};
-
-	sgx_fck: sgx_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&sgx_gate_fck>, <&sgx_mux_fck>;
-	};
-
-	sgx_ick: sgx_ick@b10 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0b10>;
-		ti,bit-shift = <0>;
-	};
-
-	cpefuse_fck: cpefuse_fck@a08 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0a08>;
-		ti,bit-shift = <0>;
-	};
-
-	ts_fck: ts_fck@a08 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&omap_32k_fck>;
-		reg = <0x0a08>;
-		ti,bit-shift = <1>;
-	};
-
-	usbtll_fck: usbtll_fck@a08 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&dpll5_m2_ck>;
-		reg = <0x0a08>;
-		ti,bit-shift = <2>;
-	};
-
-	/* CM_ICLKEN3_CORE */
-	clock@a18 {
-		compatible = "ti,clksel";
-		reg = <0xa18>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		usbtll_ick: clock-usbtll-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "usbtll_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <2>;
-		};
-	};
-
-	clock@a10 {
-		compatible = "ti,clksel";
-		reg = <0xa10>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		mmchs3_ick: clock-mmchs3-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mmchs3_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <30>;
-		};
-	};
-
-	clock@a00 {
-		compatible = "ti,clksel";
-		reg = <0xa00>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		mmchs3_fck: clock-mmchs3-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "mmchs3_fck";
-			clocks = <&core_96m_fck>;
-			ti,bit-shift = <30>;
-		};
-	};
-
-	clock@e00 {
-		compatible = "ti,clksel";
-		reg = <0xe00>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		dss1_alwon_fck: clock-dss1-alwon-fck-3430es2 {
-			#clock-cells = <0>;
-			compatible = "ti,dss-gate-clock";
-			clock-output-names = "dss1_alwon_fck_3430es2";
-			clocks = <&dpll4_m4x2_ck>;
-			ti,bit-shift = <0>;
-			ti,set-rate-parent;
-		};
-	};
-
-	dss_ick: dss_ick_3430es2@e10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dss-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x0e10>;
-		ti,bit-shift = <0>;
-	};
-
-	usbhost_120m_fck: usbhost_120m_fck@1400 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll5_m2_ck>;
-		reg = <0x1400>;
-		ti,bit-shift = <1>;
-	};
-
-	usbhost_48m_fck: usbhost_48m_fck@1400 {
-		#clock-cells = <0>;
-		compatible = "ti,dss-gate-clock";
-		clocks = <&omap_48m_fck>;
-		reg = <0x1400>;
-		ti,bit-shift = <0>;
-	};
-
-	usbhost_ick: usbhost_ick@1410 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dss-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x1410>;
-		ti,bit-shift = <0>;
-	};
-};
-
-&cm_clockdomains {
-	dpll5_clkdm: dpll5_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll5_ck>;
-	};
-
-	sgx_clkdm: sgx_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sgx_ick>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
-			 <&dss1_alwon_fck>, <&dss_ick>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>;
-	};
-
-	usbhost_clkdm: usbhost_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&usbhost_120m_fck>, <&usbhost_48m_fck>,
-			 <&usbhost_ick>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi
deleted file mode 100644
index c5fdb2bd765d0..0000000000000
--- a/arch/arm/boot/dts/omap36xx-clocks.dtsi
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP36xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&cm_clocks {
-	dpll4_ck: dpll4_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-per-j-type-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
-	};
-
-	dpll4_m5x2_ck: dpll4_m5x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll4_m5x2_mul_ck>;
-		ti,bit-shift = <0x1e>;
-		reg = <0x0d00>;
-		ti,set-rate-parent;
-		ti,set-bit-to-disable;
-	};
-
-	dpll4_m2x2_ck: dpll4_m2x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll4_m2x2_mul_ck>;
-		ti,bit-shift = <0x1b>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	dpll3_m3x2_ck: dpll3_m3x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll3_m3x2_mul_ck>;
-		ti,bit-shift = <0xc>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	dpll4_m3x2_ck: dpll4_m3x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll4_m3x2_mul_ck>;
-		ti,bit-shift = <0x1c>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	dpll4_m6x2_ck: dpll4_m6x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll4_m6x2_mul_ck>;
-		ti,bit-shift = <0x1f>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	clock@1000 {
-		compatible = "ti,clksel";
-		reg = <0x1000>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		uart4_fck: clock-uart4-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "uart4_fck";
-			clocks = <&per_48m_fck>;
-			ti,bit-shift = <18>;
-		};
-	};
-};
-
-&dpll4_m2x2_mul_ck {
-	clock-mult = <1>;
-};
-
-&dpll4_m3x2_mul_ck {
-	clock-mult = <1>;
-};
-
-&dpll4_m4x2_mul_ck {
-	ti,clock-mult = <1>;
-};
-
-&dpll4_m5x2_mul_ck {
-	ti,clock-mult = <1>;
-};
-
-&dpll4_m6x2_mul_ck {
-	clock-mult = <1>;
-};
-
-&cm_clockdomains {
-	dpll4_clkdm: dpll4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll4_ck>;
-	};
-
-	per_clkdm: per_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
-			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
-			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
-			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
-			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
-			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
-			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
-			 <&mcbsp4_ick>, <&uart4_fck>;
-	};
-};
-
-&dpll4_m4_ck {
-	ti,max-div = <31>;
-};
diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
deleted file mode 100644
index c94eb86d3da75..0000000000000
--- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP34xx/OMAP36xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&cm_clocks {
-	clock@a00 {
-		compatible = "ti,clksel";
-		reg = <0xa00>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2 {
-			#clock-cells = <0>;
-			compatible = "ti,composite-no-wait-gate-clock";
-			clock-output-names = "ssi_ssr_gate_fck_3430es2";
-			clocks = <&corex2_fck>;
-			ti,bit-shift = <0>;
-		};
-	};
-
-	clock@a40 {
-		compatible = "ti,clksel";
-		reg = <0xa40>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2 {
-			#clock-cells = <0>;
-			compatible = "ti,composite-divider-clock";
-			clock-output-names = "ssi_ssr_div_fck_3430es2";
-			clocks = <&corex2_fck>;
-			ti,bit-shift = <8>;
-			ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-		};
-	};
-
-	ssi_ssr_fck: ssi_ssr_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
-	};
-
-	ssi_sst_fck: ssi_sst_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&ssi_ssr_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	clock@a10 {
-		compatible = "ti,clksel";
-		reg = <0xa10>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2 {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-hsotgusb-interface-clock";
-			clock-output-names = "hsotgusb_ick_3430es2";
-			clocks = <&core_l3_ick>;
-			ti,bit-shift = <4>;
-		};
-
-		ssi_ick: clock-ssi-ick-3430es2 {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-ssi-interface-clock";
-			clock-output-names = "ssi_ick_3430es2";
-			clocks = <&ssi_l4_ick>;
-			ti,bit-shift = <0>;
-		};
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	clock@c00 {
-		compatible = "ti,clksel";
-		reg = <0xc00>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		usim_gate_fck: clock-usim-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "usim_gate_fck";
-			clocks = <&omap_96m_fck>;
-			ti,bit-shift = <9>;
-		};
-	};
-
-	sys_d2_ck: sys_d2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	omap_96m_d2_fck: omap_96m_d2_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	omap_96m_d4_fck: omap_96m_d4_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	omap_96m_d8_fck: omap_96m_d8_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	omap_96m_d10_fck: omap_96m_d10_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <10>;
-	};
-
-	dpll5_m2_d4_ck: dpll5_m2_d4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll5_m2_d8_ck: dpll5_m2_d8_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	dpll5_m2_d16_ck: dpll5_m2_d16_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	dpll5_m2_d20_ck: dpll5_m2_d20_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <20>;
-	};
-
-	clock@c40 {
-		compatible = "ti,clksel";
-		reg = <0xc40>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		usim_mux_fck: clock-usim-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "usim_mux_fck";
-			clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
-			ti,bit-shift = <3>;
-			ti,index-starts-at-one;
-		};
-	};
-
-	usim_fck: usim_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&usim_gate_fck>, <&usim_mux_fck>;
-	};
-
-	clock@c10 {
-		compatible = "ti,clksel";
-		reg = <0xc10>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		usim_ick: clock-usim-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "usim_ick";
-			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <9>;
-		};
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es2>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
-			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
-			 <&gpt1_ick>, <&usim_ick>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
-			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&ssi_ick>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
deleted file mode 100644
index fff9c3d341938..0000000000000
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ /dev/null
@@ -1,250 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP3 SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/media/omap3-isp.h>
-
-#include "omap3.dtsi"
-
-/ {
-	aliases {
-		serial3 = &uart4;
-	};
-
-	cpus {
-		/* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */
-		cpu: cpu@0 {
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			vbb-supply = <&abb_mpu_iva>;
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-			#cooling-cells = <2>;
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2-ti-cpu";
-		syscon = <&scm_conf>;
-
-		opp50-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			/*
-			 * we currently only select the max voltage from table
-			 * Table 4-19 of the DM3730 Data sheet (SPRS685B)
-			 * Format is:	cpu0-supply:	<target min max>
-			 *		vbb-supply:	<target min max>
-			 */
-			opp-microvolt = <1012500 1012500 1012500>,
-					 <1012500 1012500 1012500>;
-			/*
-			 * first value is silicon revision bit mask
-			 * second one is "speed binned" bit mask
-			 */
-			opp-supported-hw = <0xffffffff 3>;
-			opp-suspend;
-		};
-
-		opp100-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1200000 1200000 1200000>,
-					 <1200000 1200000 1200000>;
-			opp-supported-hw = <0xffffffff 3>;
-		};
-
-		opp130-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1325000 1325000 1325000>,
-					 <1325000 1325000 1325000>;
-			opp-supported-hw = <0xffffffff 3>;
-		};
-
-		opp1g-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1375000 1375000 1375000>,
-					 <1375000 1375000 1375000>;
-			/* only on am/dm37x with speed-binned bit set */
-			opp-supported-hw = <0xffffffff 2>;
-		};
-	};
-
-	opp_supply_mpu_iva: opp_supply {
-		compatible = "ti,omap-opp-supply";
-		ti,absolute-max-voltage-uv = <1375000>;
-	};
-
-	ocp@68000000 {
-		uart4: serial@49042000 {
-			compatible = "ti,omap3-uart";
-			reg = <0x49042000 0x400>;
-			interrupts = <80>;
-			dmas = <&sdma 81 &sdma 82>;
-			dma-names = "tx", "rx";
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-		};
-
-		abb_mpu_iva: regulator-abb-mpu {
-			compatible = "ti,abb-v1";
-			regulator-name = "abb_mpu_iva";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			reg = <0x483072f0 0x8>, <0x48306818 0x4>;
-			reg-names = "base-address", "int-address";
-			ti,tranxdone-status-mask = <0x4000000>;
-			clocks = <&sys_ck>;
-			ti,settling-time = <30>;
-			ti,clock-cycles = <8>;
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
-			1012500		0	0	0	0	0
-			1200000		0	0	0	0	0
-			1325000		0	0	0	0	0
-			1375000		1	0	0	0	0
-			>;
-		};
-
-		omap3_pmx_core2: pinmux@480025a0 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x480025a0 0x5c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pinctrl-cells = <1>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		isp: isp@480bc000 {
-			compatible = "ti,omap3-isp";
-			reg = <0x480bc000 0x12fc
-			       0x480bd800 0x0600>;
-			interrupts = <24>;
-			iommus = <&mmu_isp>;
-			syscon = <&scm_conf 0x2f0>;
-			ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
-			#clock-cells = <1>;
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		bandgap: bandgap@48002524 {
-			reg = <0x48002524 0x4>;
-			compatible = "ti,omap36xx-bandgap";
-			#thermal-sensor-cells = <0>;
-		};
-
-		target-module@480cb000 {
-			compatible = "ti,sysc-omap3630-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_core";
-			reg = <0x480cb038 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&sr2_fck>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x480cb000 0x001000>;
-
-			smartreflex_core: smartreflex@0 {
-				compatible = "ti,omap3-smartreflex-core";
-				reg = <0 0x400>;
-				interrupts = <19>;
-			};
-		};
-
-		target-module@480c9000 {
-			compatible = "ti,sysc-omap3630-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_mpu_iva";
-			reg = <0x480c9038 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&sr1_fck>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x480c9000 0x001000>;
-
-
-			smartreflex_mpu_iva: smartreflex@480c9000 {
-				compatible = "ti,omap3-smartreflex-mpu-iva";
-				reg = <0 0x400>;
-				interrupts = <18>;
-			};
-		};
-
-		/*
-		 * Note that the sysconfig register layout is a subset of the
-		 * "ti,sysc-omap4" type register with just sidle and midle bits
-		 * available while omap34xx has "ti,sysc-omap2" type sysconfig.
-		 */
-		sgx_module: target-module@50000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x5000fe00 0x4>,
-			      <0x5000fe10 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&sgx_fck>, <&sgx_ick>;
-			clock-names = "fck", "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x50000000 0x2000000>;
-
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
-		};
-	};
-
-	thermal_zones: thermal-zones {
-		#include "omap3-cpu-thermal.dtsi"
-	};
-};
-
-&sdma {
-	compatible = "ti,omap3630-sdma", "ti,omap-sdma";
-};
-
-/* OMAP3630 needs dss_96m_fck for VENC */
-&venc {
-	clocks = <&dss_tv_fck>, <&dss_96m_fck>;
-	clock-names = "fck", "tv_dac_clk";
-};
-
-&ssi {
-	status = "okay";
-
-	clocks = <&ssi_ssr_fck>,
-		 <&ssi_sst_fck>,
-		 <&ssi_ick>;
-	clock-names = "ssi_ssr_fck",
-		      "ssi_sst_fck",
-		      "ssi_ick";
-};
-
-&usb_otg_target {
-	clocks = <&hsotgusb_ick_3430es2>;
-};
-
-/include/ "omap34xx-omap36xx-clocks.dtsi"
-/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
-/include/ "omap36xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
deleted file mode 100644
index 2e13ca11ceeaf..0000000000000
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ /dev/null
@@ -1,1790 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP3 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&prm_clocks {
-	virt_16_8m_ck: virt_16_8m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16800000>;
-	};
-
-	osc_sys_ck: osc_sys_ck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>;
-		reg = <0x0d40>;
-	};
-
-	sys_ck: sys_ck@1270 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&osc_sys_ck>;
-		ti,bit-shift = <6>;
-		ti,max-div = <3>;
-		reg = <0x1270>;
-		ti,index-starts-at-one;
-	};
-
-	sys_clkout1: sys_clkout1@d70 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&osc_sys_ck>;
-		reg = <0x0d70>;
-		ti,bit-shift = <7>;
-	};
-
-	dpll3_x2_ck: dpll3_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll3_m2x2_ck: dpll3_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m2_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_x2_ck: dpll4_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	corex2_fck: corex2_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	wkup_l4_ick: wkup_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-};
-
-&scm_clocks {
-	/* CONTROL_DEVCONF1 */
-	clock@68 {
-		compatible = "ti,clksel";
-		reg = <0x68>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		mcbsp5_mux_fck: clock-mcbsp5-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "mcbsp5_mux_fck";
-			clocks = <&core_96m_fck>, <&mcbsp_clks>;
-			ti,bit-shift = <4>;
-		};
-
-		mcbsp3_mux_fck: clock-mcbsp3-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "mcbsp3_mux_fck";
-			clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		};
-
-		mcbsp4_mux_fck: clock-mcbsp4-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "mcbsp4_mux_fck";
-			clocks = <&per_96m_fck>, <&mcbsp_clks>;
-			ti,bit-shift = <2>;
-		};
-	};
-
-	mcbsp5_fck: mcbsp5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
-	};
-
-	/* CONTROL_DEVCONF0 */
-	clock@4 {
-		compatible = "ti,clksel";
-		reg = <0x4>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		mcbsp1_mux_fck: clock-mcbsp1-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "mcbsp1_mux_fck";
-			clocks = <&core_96m_fck>, <&mcbsp_clks>;
-			ti,bit-shift = <2>;
-		};
-
-		mcbsp2_mux_fck: clock-mcbsp2-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "mcbsp2_mux_fck";
-			clocks = <&per_96m_fck>, <&mcbsp_clks>;
-			ti,bit-shift = <6>;
-		};
-	};
-
-	mcbsp1_fck: mcbsp1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
-	};
-
-	mcbsp2_fck: mcbsp2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
-	};
-
-	mcbsp3_fck: mcbsp3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
-	};
-
-	mcbsp4_fck: mcbsp4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
-	};
-};
-&cm_clocks {
-	dummy_apb_pclk: dummy_apb_pclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	omap_32k_fck: omap_32k_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_12m_ck: virt_12m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13m_ck: virt_13m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	virt_38_4m_ck: virt_38_4m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <38400000>;
-	};
-
-	dpll4_ck: dpll4_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-per-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
-	};
-
-	dpll4_m2_ck: dpll4_m2_ck@d48 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,max-div = <63>;
-		reg = <0x0d48>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m2x2_mul_ck: dpll4_m2x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m2_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_m2x2_ck: dpll4_m2x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m2x2_mul_ck>;
-		ti,bit-shift = <0x1b>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	omap_96m_alwon_fck: omap_96m_alwon_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll3_ck: dpll3_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-core-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
-	};
-
-	/* CM_CLKSEL1_EMU */
-	clock@1140 {
-		compatible = "ti,clksel";
-		reg = <0x1140>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		dpll3_m3_ck: clock-dpll3-m3 {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "dpll3_m3_ck";
-			clocks = <&dpll3_ck>;
-			ti,bit-shift = <16>;
-			ti,max-div = <31>;
-			ti,index-starts-at-one;
-		};
-
-		dpll4_m6_ck: clock-dpll4-m6 {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "dpll4_m6_ck";
-			clocks = <&dpll4_ck>;
-			ti,bit-shift = <24>;
-			ti,max-div = <63>;
-			ti,index-starts-at-one;
-		};
-
-		emu_src_mux_ck: clock-emu-src-mux {
-			#clock-cells = <0>;
-			compatible = "ti,mux-clock";
-			clock-output-names = "emu_src_mux_ck";
-			clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-		};
-
-		pclk_fck: clock-pclk-fck {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "pclk_fck";
-			clocks = <&emu_src_ck>;
-			ti,bit-shift = <8>;
-			ti,max-div = <7>;
-			ti,index-starts-at-one;
-		};
-
-		pclkx2_fck: clock-pclkx2-fck {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "pclkx2_fck";
-			clocks = <&emu_src_ck>;
-			ti,bit-shift = <6>;
-			ti,max-div = <3>;
-			ti,index-starts-at-one;
-		};
-
-		atclk_fck: clock-atclk-fck {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "atclk_fck";
-			clocks = <&emu_src_ck>;
-			ti,bit-shift = <4>;
-			ti,max-div = <3>;
-			ti,index-starts-at-one;
-		};
-
-		traceclk_src_fck: clock-traceclk-src-fck {
-			#clock-cells = <0>;
-			compatible = "ti,mux-clock";
-			clock-output-names = "traceclk_src_fck";
-			clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-			ti,bit-shift = <2>;
-		};
-
-		traceclk_fck: clock-traceclk-fck {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "traceclk_fck";
-			clocks = <&traceclk_src_fck>;
-			ti,bit-shift = <11>;
-			ti,max-div = <7>;
-			ti,index-starts-at-one;
-		};
-	};
-
-	dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m3_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll3_m3x2_ck: dpll3_m3x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll3_m3x2_mul_ck>;
-		ti,bit-shift = <0xc>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	emu_core_alwon_ck: emu_core_alwon_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sys_altclk: sys_altclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	mcbsp_clks: mcbsp_clks {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	core_ck: core_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll1_fck: dpll1_fck@940 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <19>;
-		ti,max-div = <7>;
-		reg = <0x0940>;
-		ti,index-starts-at-one;
-	};
-
-	dpll1_ck: dpll1_ck@904 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-clock";
-		clocks = <&sys_ck>, <&dpll1_fck>;
-		reg = <0x0904>, <0x0924>, <0x0940>, <0x0934>;
-	};
-
-	dpll1_x2_ck: dpll1_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll1_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll1_x2m2_ck: dpll1_x2m2_ck@944 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll1_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0944>;
-		ti,index-starts-at-one;
-	};
-
-	cm_96m_fck: cm_96m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_alwon_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	/* CM_CLKSEL1_PLL */
-	clock@d40 {
-		compatible = "ti,clksel";
-		reg = <0xd40>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		dpll3_m2_ck: clock-dpll3-m2 {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "dpll3_m2_ck";
-			clocks = <&dpll3_ck>;
-			ti,bit-shift = <27>;
-			ti,max-div = <31>;
-			ti,index-starts-at-one;
-		};
-
-		omap_96m_fck: clock-omap-96m-fck {
-			#clock-cells = <0>;
-			compatible = "ti,mux-clock";
-			clock-output-names = "omap_96m_fck";
-			clocks = <&cm_96m_fck>, <&sys_ck>;
-			ti,bit-shift = <6>;
-		};
-
-		omap_54m_fck: clock-omap-54m-fck {
-			#clock-cells = <0>;
-			compatible = "ti,mux-clock";
-			clock-output-names = "omap_54m_fck";
-			clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
-			ti,bit-shift = <5>;
-		};
-
-		omap_48m_fck: clock-omap-48m-fck {
-			#clock-cells = <0>;
-			compatible = "ti,mux-clock";
-			clock-output-names = "omap_48m_fck";
-			clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
-			ti,bit-shift = <3>;
-		};
-	};
-
-	/* CM_CLKSEL_DSS */
-	clock@e40 {
-		compatible = "ti,clksel";
-		reg = <0xe40>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		dpll4_m3_ck: clock-dpll4-m3 {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "dpll4_m3_ck";
-			clocks = <&dpll4_ck>;
-			ti,bit-shift = <8>;
-			ti,max-div = <32>;
-			ti,index-starts-at-one;
-		};
-
-		dpll4_m4_ck: clock-dpll4-m4 {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "dpll4_m4_ck";
-			clocks = <&dpll4_ck>;
-			ti,max-div = <16>;
-			ti,index-starts-at-one;
-		};
-	};
-
-	dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m3_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_m3x2_ck: dpll4_m3x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m3x2_mul_ck>;
-		ti,bit-shift = <0x1c>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	cm_96m_d2_fck: cm_96m_d2_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&cm_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	omap_12m_fck: omap_12m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_48m_fck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll4_m4_ck>;
-		ti,clock-mult = <2>;
-		ti,clock-div = <1>;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m4x2_ck: dpll4_m4x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m4x2_mul_ck>;
-		ti,bit-shift = <0x1d>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m5_ck: dpll4_m5_ck@f40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,max-div = <63>;
-		reg = <0x0f40>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll4_m5_ck>;
-		ti,clock-mult = <2>;
-		ti,clock-div = <1>;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m5x2_ck: dpll4_m5x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m5x2_mul_ck>;
-		ti,bit-shift = <0x1e>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m6_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_m6x2_ck: dpll4_m6x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m6x2_mul_ck>;
-		ti,bit-shift = <0x1f>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	emu_per_alwon_ck: emu_per_alwon_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m6x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	/* CM_CLKOUT_CTRL */
-	clock@d70 {
-		compatible = "ti,clksel";
-		reg = <0xd70>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		clkout2_src_gate_ck: clock-clkout2-src-gate {
-			#clock-cells = <0>;
-			compatible = "ti,composite-no-wait-gate-clock";
-			clock-output-names = "clkout2_src_gate_ck";
-			clocks = <&core_ck>;
-			ti,bit-shift = <7>;
-		};
-
-		clkout2_src_mux_ck: clock-clkout2-src-mux {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "clkout2_src_mux_ck";
-			clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
-		};
-
-		sys_clkout2: clock-sys-clkout2 {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "sys_clkout2";
-			clocks = <&clkout2_src_ck>;
-			ti,bit-shift = <3>;
-			ti,max-div = <64>;
-			ti,index-power-of-two;
-		};
-	};
-
-	clkout2_src_ck: clkout2_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
-	};
-
-	mpu_ck: mpu_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll1_x2m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	arm_fck: arm_fck@924 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mpu_ck>;
-		reg = <0x0924>;
-		ti,max-div = <2>;
-	};
-
-	emu_mpu_alwon_ck: emu_mpu_alwon_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&mpu_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	/* CM_CLKSEL_CORE */
-	clock@a40 {
-		compatible = "ti,clksel";
-		reg = <0xa40>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		l3_ick: clock-l3-ick {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "l3_ick";
-			clocks = <&core_ck>;
-			ti,max-div = <3>;
-			ti,index-starts-at-one;
-		};
-
-		l4_ick: clock-l4-ick {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "l4_ick";
-			clocks = <&l3_ick>;
-			ti,bit-shift = <2>;
-			ti,max-div = <3>;
-			ti,index-starts-at-one;
-		};
-
-		gpt10_mux_fck: clock-gpt10-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "gpt10_mux_fck";
-			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <6>;
-		};
-
-		gpt11_mux_fck: clock-gpt11-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "gpt11_mux_fck";
-			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <7>;
-		};
-	};
-
-	/* CM_CLKSEL_WKUP */
-	clock@c40 {
-		compatible = "ti,clksel";
-		reg = <0xc40>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		rm_ick: clock-rm-ick {
-			#clock-cells = <0>;
-			compatible = "ti,divider-clock";
-			clock-output-names = "rm_ick";
-			clocks = <&l4_ick>;
-			ti,bit-shift = <1>;
-			ti,max-div = <3>;
-			ti,index-starts-at-one;
-		};
-
-		gpt1_mux_fck: clock-gpt1-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "gpt1_mux_fck";
-			clocks = <&omap_32k_fck>, <&sys_ck>;
-		};
-	};
-
-	/* CM_FCLKEN1_CORE */
-	clock@a00 {
-		compatible = "ti,clksel";
-		reg = <0xa00>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		gpt10_gate_fck: clock-gpt10-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "gpt10_gate_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <11>;
-		};
-
-		gpt11_gate_fck: clock-gpt11-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "gpt11_gate_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <12>;
-		};
-
-		mmchs2_fck: clock-mmchs2-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "mmchs2_fck";
-			clocks = <&core_96m_fck>;
-			ti,bit-shift = <25>;
-		};
-
-		mmchs1_fck: clock-mmchs1-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "mmchs1_fck";
-			clocks = <&core_96m_fck>;
-			ti,bit-shift = <24>;
-		};
-
-		i2c3_fck: clock-i2c3-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "i2c3_fck";
-			clocks = <&core_96m_fck>;
-			ti,bit-shift = <17>;
-		};
-
-		i2c2_fck: clock-i2c2-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "i2c2_fck";
-			clocks = <&core_96m_fck>;
-			ti,bit-shift = <16>;
-		};
-
-		i2c1_fck: clock-i2c1-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "i2c1_fck";
-			clocks = <&core_96m_fck>;
-			ti,bit-shift = <15>;
-		};
-
-		mcbsp5_gate_fck: clock-mcbsp5-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "mcbsp5_gate_fck";
-			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <10>;
-		};
-
-		mcbsp1_gate_fck: clock-mcbsp1-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "mcbsp1_gate_fck";
-			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <9>;
-		};
-
-		mcspi4_fck: clock-mcspi4-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "mcspi4_fck";
-			clocks = <&core_48m_fck>;
-			ti,bit-shift = <21>;
-		};
-
-		mcspi3_fck: clock-mcspi3-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "mcspi3_fck";
-			clocks = <&core_48m_fck>;
-			ti,bit-shift = <20>;
-		};
-
-		mcspi2_fck: clock-mcspi2-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "mcspi2_fck";
-			clocks = <&core_48m_fck>;
-			ti,bit-shift = <19>;
-		};
-
-		mcspi1_fck: clock-mcspi1-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "mcspi1_fck";
-			clocks = <&core_48m_fck>;
-			ti,bit-shift = <18>;
-		};
-
-		uart2_fck: clock-uart2-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "uart2_fck";
-			clocks = <&core_48m_fck>;
-			ti,bit-shift = <14>;
-		};
-
-		uart1_fck: clock-uart1-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "uart1_fck";
-			clocks = <&core_48m_fck>;
-			ti,bit-shift = <13>;
-		};
-
-		hdq_fck: clock-hdq-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "hdq_fck";
-			clocks = <&core_12m_fck>;
-			ti,bit-shift = <22>;
-		};
-	};
-
-	gpt10_fck: gpt10_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
-	};
-
-	gpt11_fck: gpt11_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
-	};
-
-	core_96m_fck: core_96m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	core_48m_fck: core_48m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_48m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	core_12m_fck: core_12m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_12m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	core_l3_ick: core_l3_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	/* CM_ICLKEN1_CORE */
-	clock@a10 {
-		compatible = "ti,clksel";
-		reg = <0xa10>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		sdrc_ick: clock-sdrc-ick {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "sdrc_ick";
-			clocks = <&core_l3_ick>;
-			ti,bit-shift = <1>;
-		};
-
-		mmchs2_ick: clock-mmchs2-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mmchs2_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <25>;
-		};
-
-		mmchs1_ick: clock-mmchs1-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mmchs1_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <24>;
-		};
-
-		hdq_ick: clock-hdq-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "hdq_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <22>;
-		};
-
-		mcspi4_ick: clock-mcspi4-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mcspi4_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <21>;
-		};
-
-		mcspi3_ick: clock-mcspi3-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mcspi3_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <20>;
-		};
-
-		mcspi2_ick: clock-mcspi2-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mcspi2_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <19>;
-		};
-
-		mcspi1_ick: clock-mcspi1-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mcspi1_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <18>;
-		};
-
-		i2c3_ick: clock-i2c3-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "i2c3_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <17>;
-		};
-
-		i2c2_ick: clock-i2c2-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "i2c2_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <16>;
-		};
-
-		i2c1_ick: clock-i2c1-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "i2c1_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <15>;
-		};
-
-		uart2_ick: clock-uart2-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "uart2_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <14>;
-		};
-
-		uart1_ick: clock-uart1-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "uart1_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <13>;
-		};
-
-		gpt11_ick: clock-gpt11-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpt11_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <12>;
-		};
-
-		gpt10_ick: clock-gpt10-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpt10_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <11>;
-		};
-
-		mcbsp5_ick: clock-mcbsp5-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mcbsp5_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <10>;
-		};
-
-		mcbsp1_ick: clock-mcbsp1-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mcbsp1_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <9>;
-		};
-
-		omapctrl_ick: clock-omapctrl-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "omapctrl_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <6>;
-		};
-
-		aes2_ick: clock-aes2-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "aes2_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <28>;
-		};
-
-		sha12_ick: clock-sha12-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "sha12_ick";
-			clocks = <&core_l4_ick>;
-			ti,bit-shift = <27>;
-		};
-	};
-
-	gpmc_fck: gpmc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_l3_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	core_l4_ick: core_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	/* CM_FCLKEN_DSS */
-	clock@e00 {
-		compatible = "ti,clksel";
-		reg = <0xe00>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		dss_tv_fck: clock-dss-tv-fck {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "dss_tv_fck";
-			clocks = <&omap_54m_fck>;
-			ti,bit-shift = <2>;
-		};
-
-		dss_96m_fck: clock-dss-96m-fck {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "dss_96m_fck";
-			clocks = <&omap_96m_fck>;
-			ti,bit-shift = <2>;
-		};
-
-		dss2_alwon_fck: clock-dss2-alwon-fck {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "dss2_alwon_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <1>;
-		};
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	/* CM_FCLKEN_WKUP */
-	clock@c00 {
-		compatible = "ti,clksel";
-		reg = <0xc00>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		gpt1_gate_fck: clock-gpt1-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "gpt1_gate_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <0>;
-		};
-
-		gpio1_dbck: clock-gpio1-dbck {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "gpio1_dbck";
-			clocks = <&wkup_32k_fck>;
-			ti,bit-shift = <3>;
-		};
-
-		wdt2_fck: clock-wdt2-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "wdt2_fck";
-			clocks = <&wkup_32k_fck>;
-			ti,bit-shift = <5>;
-		};
-	};
-
-	gpt1_fck: gpt1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
-	};
-
-	wkup_32k_fck: wkup_32k_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	/* CM_ICLKEN_WKUP */
-	clock@c10 {
-		compatible = "ti,clksel";
-		reg = <0xc10>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		wdt2_ick: clock-wdt2-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "wdt2_ick";
-			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <5>;
-		};
-
-		wdt1_ick: clock-wdt1-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "wdt1_ick";
-			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <4>;
-		};
-
-		gpio1_ick: clock-gpio1-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpio1_ick";
-			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <3>;
-		};
-
-		omap_32ksync_ick: clock-omap-32ksync-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "omap_32ksync_ick";
-			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <2>;
-		};
-
-		gpt12_ick: clock-gpt12-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpt12_ick";
-			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <1>;
-		};
-
-		gpt1_ick: clock-gpt1-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpt1_ick";
-			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <0>;
-		};
-	};
-
-	per_96m_fck: per_96m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_alwon_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	per_48m_fck: per_48m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_48m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	/* CM_FCLKEN_PER */
-	clock@1000 {
-		compatible = "ti,clksel";
-		reg = <0x1000>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		uart3_fck: clock-uart3-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "uart3_fck";
-			clocks = <&per_48m_fck>;
-			ti,bit-shift = <11>;
-		};
-
-		gpt2_gate_fck: clock-gpt2-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "gpt2_gate_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <3>;
-		};
-
-		gpt3_gate_fck: clock-gpt3-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "gpt3_gate_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <4>;
-		};
-
-		gpt4_gate_fck: clock-gpt4-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "gpt4_gate_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <5>;
-		};
-
-		gpt5_gate_fck: clock-gpt5-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "gpt5_gate_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <6>;
-		};
-
-		gpt6_gate_fck: clock-gpt6-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "gpt6_gate_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <7>;
-		};
-
-		gpt7_gate_fck: clock-gpt7-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "gpt7_gate_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <8>;
-		};
-
-		gpt8_gate_fck: clock-gpt8-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "gpt8_gate_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <9>;
-		};
-
-		gpt9_gate_fck: clock-gpt9-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "gpt9_gate_fck";
-			clocks = <&sys_ck>;
-			ti,bit-shift = <10>;
-		};
-
-		gpio6_dbck: clock-gpio6-dbck {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "gpio6_dbck";
-			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <17>;
-		};
-
-		gpio5_dbck: clock-gpio5-dbck {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "gpio5_dbck";
-			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <16>;
-		};
-
-		gpio4_dbck: clock-gpio4-dbck {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "gpio4_dbck";
-			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <15>;
-		};
-
-		gpio3_dbck: clock-gpio3-dbck {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "gpio3_dbck";
-			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <14>;
-		};
-
-		gpio2_dbck: clock-gpio2-dbck {
-			#clock-cells = <0>;
-			compatible = "ti,gate-clock";
-			clock-output-names = "gpio2_dbck";
-			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <13>;
-		};
-
-		wdt3_fck: clock-wdt3-fck {
-			#clock-cells = <0>;
-			compatible = "ti,wait-gate-clock";
-			clock-output-names = "wdt3_fck";
-			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <12>;
-		};
-
-		mcbsp2_gate_fck: clock-mcbsp2-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "mcbsp2_gate_fck";
-			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <0>;
-		};
-
-		mcbsp3_gate_fck: clock-mcbsp3-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "mcbsp3_gate_fck";
-			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <1>;
-		};
-
-		mcbsp4_gate_fck: clock-mcbsp4-gate-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-gate-clock";
-			clock-output-names = "mcbsp4_gate_fck";
-			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <2>;
-		};
-	};
-
-	/* CM_CLKSEL_PER */
-	clock@1040 {
-		compatible = "ti,clksel";
-		reg = <0x1040>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		gpt2_mux_fck: clock-gpt2-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "gpt2_mux_fck";
-			clocks = <&omap_32k_fck>, <&sys_ck>;
-		};
-
-		gpt3_mux_fck: clock-gpt3-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "gpt3_mux_fck";
-			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <1>;
-		};
-
-		gpt4_mux_fck: clock-gpt4-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "gpt4_mux_fck";
-			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <2>;
-		};
-
-		gpt5_mux_fck: clock-gpt5-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "gpt5_mux_fck";
-			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <3>;
-		};
-
-		gpt6_mux_fck: clock-gpt6-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "gpt6_mux_fck";
-			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <4>;
-		};
-
-		gpt7_mux_fck: clock-gpt7-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "gpt7_mux_fck";
-			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <5>;
-		};
-
-		gpt8_mux_fck: clock-gpt8-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "gpt8_mux_fck";
-			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <6>;
-		};
-
-		gpt9_mux_fck: clock-gpt9-mux-fck {
-			#clock-cells = <0>;
-			compatible = "ti,composite-mux-clock";
-			clock-output-names = "gpt9_mux_fck";
-			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <7>;
-		};
-	};
-
-	gpt2_fck: gpt2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
-	};
-
-	gpt3_fck: gpt3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
-	};
-
-	gpt4_fck: gpt4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
-	};
-
-	gpt5_fck: gpt5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
-	};
-
-	gpt6_fck: gpt6_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
-	};
-
-	gpt7_fck: gpt7_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
-	};
-
-	gpt8_fck: gpt8_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
-	};
-
-	gpt9_fck: gpt9_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
-	};
-
-	per_32k_alwon_fck: per_32k_alwon_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	per_l4_ick: per_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	/* CM_ICLKEN_PER */
-	clock@1010 {
-		compatible = "ti,clksel";
-		reg = <0x1010>;
-		#clock-cells = <2>;
-		#address-cells = <0>;
-
-		gpio6_ick: clock-gpio6-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpio6_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <17>;
-		};
-
-		gpio5_ick: clock-gpio5-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpio5_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <16>;
-		};
-
-		gpio4_ick: clock-gpio4-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpio4_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <15>;
-		};
-
-		gpio3_ick: clock-gpio3-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpio3_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <14>;
-		};
-
-		gpio2_ick: clock-gpio2-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpio2_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <13>;
-		};
-
-		wdt3_ick: clock-wdt3-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "wdt3_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <12>;
-		};
-
-		uart3_ick: clock-uart3-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "uart3_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <11>;
-		};
-
-		uart4_ick: clock-uart4-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "uart4_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <18>;
-		};
-
-		gpt9_ick: clock-gpt9-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpt9_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <10>;
-		};
-
-		gpt8_ick: clock-gpt8-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpt8_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <9>;
-		};
-
-		gpt7_ick: clock-gpt7-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpt7_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <8>;
-		};
-
-		gpt6_ick: clock-gpt6-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpt6_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <7>;
-		};
-
-		gpt5_ick: clock-gpt5-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpt5_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <6>;
-		};
-
-		gpt4_ick: clock-gpt4-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpt4_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <5>;
-		};
-
-		gpt3_ick: clock-gpt3-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpt3_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <4>;
-		};
-
-		gpt2_ick: clock-gpt2-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "gpt2_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <3>;
-		};
-
-		mcbsp2_ick: clock-mcbsp2-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mcbsp2_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <0>;
-		};
-
-		mcbsp3_ick: clock-mcbsp3-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mcbsp3_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <1>;
-		};
-
-		mcbsp4_ick: clock-mcbsp4-ick {
-			#clock-cells = <0>;
-			compatible = "ti,omap3-interface-clock";
-			clock-output-names = "mcbsp4_ick";
-			clocks = <&per_l4_ick>;
-			ti,bit-shift = <2>;
-		};
-	};
-
-	emu_src_ck: emu_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,clkdm-gate-clock";
-		clocks = <&emu_src_mux_ck>;
-	};
-
-	secure_32k_fck: secure_32k_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	gpt12_fck: gpt12_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&secure_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	wdt1_fck: wdt1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&secure_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>;
-	};
-
-	dpll3_clkdm: dpll3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll3_ck>;
-	};
-
-	dpll1_clkdm: dpll1_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll1_ck>;
-	};
-
-	per_clkdm: per_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
-			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
-			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
-			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
-			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
-			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
-			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
-			 <&mcbsp4_ick>;
-	};
-
-	emu_clkdm: emu_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&emu_src_ck>;
-	};
-
-	dpll4_clkdm: dpll4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll4_ck>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
-			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
-			 <&gpt1_ick>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
deleted file mode 100644
index 801b4f10350c1..0000000000000
--- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP4/5 SoC CPU thermal
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-cpu_thermal: cpu_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     0>;
-
-	cpu_trips: trips {
-		cpu_alert0: cpu_alert {
-			temperature = <100000>; /* millicelsius */
-			hysteresis = <2000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu_crit: cpu_crit {
-			temperature = <125000>; /* millicelsius */
-			hysteresis = <2000>; /* millicelsius */
-			type = "critical";
-		};
-	};
-
-	cpu_cooling_maps: cooling-maps {
-		map0 {
-			trip = <&cpu_alert0>;
-			cooling-device =
-				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts
deleted file mode 100644
index ccf03a743678f..0000000000000
--- a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include "motorola-mapphone-common.dtsi"
-
-/ {
-	model = "Motorola Droid Bionic XT875";
-	compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4";
-};
-
-&keypad {
-	keypad,num-rows = <8>;
-	keypad,num-columns = <8>;
-	linux,keymap = <
-	MATRIX_KEY(5, 0, KEY_VOLUMEUP)
-	MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)
-	>;
-};
-
-&i2c1 {
-	led-controller@38 {
-		compatible = "ti,lm3532";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x38>;
-
-		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
-
-		ramp-up-us = <1024>;
-		ramp-down-us = <8193>;
-
-		backlight_led: led@0 {
-			reg = <0>;
-			led-sources = <2>;
-			ti,led-mode = <0>;
-			label = ":backlight";
-		};
-	};
-};
-
-&i2c4 {
-	kxtf9: accelerometer@f {
-		compatible = "kionix,kxtf9";
-		reg = <0x0f>;
-
-		vdd-supply = <&vhvio>;
-
-		interrupt-parent = <&gpio2>;
-		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
-
-		rotation-matrix = "0", "-1", "0",
-				  "1", "0", "0",
-				  "0", "0", "1";
-	};
-};
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
deleted file mode 100644
index e833c21f1c014..0000000000000
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include "motorola-mapphone-common.dtsi"
-
-/ {
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		volume_down {
-			label = "Volume Down";
-			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
-			linux,code = <KEY_VOLUMEDOWN>;
-			linux,can-disable;
-			/* Value above 7.95ms for no GPIO hardware debounce */
-			debounce-interval = <10>;
-		};
-
-		/*
-		 * We use pad 0x4a100116 abe_dmic_din3.gpio_122 as the irq instead
-		 * of the gpio interrupt to avoid lost events in deeper idle states.
-		*/
-		slider {
-			label = "Keypad Slide";
-			interrupts-extended = <&omap4_pmx_core 0xd6>;
-			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_KEYPAD_SLIDE>;
-			linux,can-disable;
-			/* Value above 7.95ms for no GPIO hardware debounce */
-			debounce-interval = <10>;
-		};
-	};
-};
-
-/ {
-	model = "Motorola Droid 4 XT894";
-	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
-};
-
-&keypad {
-	keypad,num-rows = <8>;
-	keypad,num-columns = <8>;
-	linux,keymap = <
-
-	/* Row 1 */
-	MATRIX_KEY(0, 2, KEY_1)
-	MATRIX_KEY(0, 6, KEY_2)
-	MATRIX_KEY(2, 3, KEY_3)
-	MATRIX_KEY(0, 7, KEY_4)
-	MATRIX_KEY(0, 4, KEY_5)
-	MATRIX_KEY(5, 5, KEY_6)
-	MATRIX_KEY(0, 1, KEY_7)
-	MATRIX_KEY(0, 5, KEY_8)
-	MATRIX_KEY(0, 0, KEY_9)
-	MATRIX_KEY(1, 6, KEY_0)
-
-	/* Row 2 */
-	MATRIX_KEY(3, 4, KEY_APOSTROPHE)
-	MATRIX_KEY(7, 6, KEY_Q)
-	MATRIX_KEY(7, 7, KEY_W)
-	MATRIX_KEY(7, 2, KEY_E)
-	MATRIX_KEY(1, 0, KEY_R)
-	MATRIX_KEY(4, 4, KEY_T)
-	MATRIX_KEY(1, 2, KEY_Y)
-	MATRIX_KEY(6, 7, KEY_U)
-	MATRIX_KEY(2, 2, KEY_I)
-	MATRIX_KEY(5, 6, KEY_O)
-	MATRIX_KEY(3, 7, KEY_P)
-	MATRIX_KEY(6, 5, KEY_BACKSPACE)
-
-	/* Row 3 */
-	MATRIX_KEY(5, 4, KEY_TAB)
-	MATRIX_KEY(5, 7, KEY_A)
-	MATRIX_KEY(2, 7, KEY_S)
-	MATRIX_KEY(7, 0, KEY_D)
-	MATRIX_KEY(2, 6, KEY_F)
-	MATRIX_KEY(6, 2, KEY_G)
-	MATRIX_KEY(6, 6, KEY_H)
-	MATRIX_KEY(1, 4, KEY_J)
-	MATRIX_KEY(3, 1, KEY_K)
-	MATRIX_KEY(2, 1, KEY_L)
-	MATRIX_KEY(4, 6, KEY_ENTER)
-
-	/* Row 4 */
-	MATRIX_KEY(3, 6, KEY_LEFTSHIFT)		/* KEY_CAPSLOCK */
-	MATRIX_KEY(6, 1, KEY_Z)
-	MATRIX_KEY(7, 4, KEY_X)
-	MATRIX_KEY(5, 1, KEY_C)
-	MATRIX_KEY(1, 7, KEY_V)
-	MATRIX_KEY(2, 4, KEY_B)
-	MATRIX_KEY(4, 1, KEY_N)
-	MATRIX_KEY(1, 1, KEY_M)
-	MATRIX_KEY(3, 5, KEY_COMMA)
-	MATRIX_KEY(5, 2, KEY_DOT)
-	MATRIX_KEY(6, 3, KEY_UP)
-	MATRIX_KEY(7, 3, KEY_OK)
-
-	/* Row 5 */
-	MATRIX_KEY(2, 5, KEY_LEFTCTRL)		/* KEY_LEFTSHIFT */
-	MATRIX_KEY(4, 5, KEY_LEFTALT)		/* SYM */
-	MATRIX_KEY(6, 0, KEY_MINUS)
-	MATRIX_KEY(4, 7, KEY_EQUAL)
-	MATRIX_KEY(1, 5, KEY_SPACE)
-	MATRIX_KEY(3, 2, KEY_SLASH)
-	MATRIX_KEY(4, 3, KEY_LEFT)
-	MATRIX_KEY(5, 3, KEY_DOWN)
-	MATRIX_KEY(3, 3, KEY_RIGHT)
-
-	/* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
-	MATRIX_KEY(5, 0, KEY_VOLUMEUP)
-	>;
-};
-
-&i2c1 {
-	led-controller@38 {
-		compatible = "ti,lm3532";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x38>;
-
-		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
-
-		ramp-up-us = <1024>;
-		ramp-down-us = <8193>;
-
-		backlight_led: led@0 {
-			reg = <0>;
-			led-sources = <2>;
-			ti,led-mode = <0>;
-			label = ":backlight";
-		};
-
-		led@1 {
-			reg = <1>;
-			led-sources = <1>;
-			ti,led-mode = <0>;
-			label = ":kbd_backlight";
-		};
-	};
-};
-
-&i2c4 {
-	lis3dh: accelerometer@18 {
-		compatible = "st,lis3dh-accel";
-		reg = <0x18>;
-
-		vdd-supply = <&vhvio>;
-
-		interrupt-parent = <&gpio2>;
-		interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */
-
-		rotation-matrix = "0", "-1", "0",
-				  "1", "0", "0",
-				  "0", "0", "1";
-	};
-};
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
deleted file mode 100644
index b294c22177cbf..0000000000000
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-/dts-v1/;
-
-#include "omap4-duovero.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "OMAP4430 Gumstix Duovero on Parlor";
-	compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
-
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led0 {
-			label = "duovero:blue:led0";
-			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;	/* gpio_122 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button0 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
-			/* Value above 7.95ms for no GPIO hardware debounce */
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "d";
-
-		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio_63 */
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-0 = <
-			&led_pins
-			&button_pins
-			&smsc_pins
-	>;
-
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* abe_dmic_din2.gpio_121 */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	smsc_pins: pinmux_smsc_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3)		/* gpmc_a20.gpio_44: IRQ */
-			OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a21.gpio_45: nReset */
-			OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48: amdix enabled */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)		/* hdmi_hpd.gpio_63 */
-			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
-			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
-			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
-		>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <100000>;
-
-	/* optional 1K EEPROM with revision information */
-	eeprom@51 {
-		compatible = "atmel,24c01";
-		reg = <0x51>;
-		pagesize = <8>;
-	};
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-#include "omap-gpmc-smsc911x.dtsi"
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;			/* CS5 */
-
-	ethernet@gpmc {
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;		/* gpio_44 */
-
-		phy-mode = "mii";
-
-		gpmc,cs-on-ns = <10>;
-		gpmc,cs-rd-off-ns = <50>;
-		gpmc,cs-wr-off-ns = <50>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <15>;
-		gpmc,oe-off-ns = <50>;
-		gpmc,we-on-ns = <15>;
-		gpmc,we-off-ns = <50>;
-		gpmc,rd-cycle-ns = <50>;
-		gpmc,wr-cycle-ns = <50>;
-		gpmc,access-ns = <50>;
-		gpmc,page-burst-access-ns = <0>;
-		gpmc,bus-turnaround-ns = <35>;
-		gpmc,cycle2cycle-delay-ns = <35>;
-		gpmc,wr-data-mux-bus-ns = <35>;
-		gpmc,wr-access-ns = <50>;
-
-		gpmc,mux-add-data = <2>;
-		gpmc,sync-read;
-		gpmc,sync-write;
-		gpmc,clk-activation-ns = <5>;
-		gpmc,sync-clk-ps = <20000>;
-	};
-};
-
-&dss {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-	vdda-supply = <&vdac>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&hdmi_connector_in>;
-		};
-	};
-};
-
-&uart3 {
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART3_RX>;
-};
diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi
deleted file mode 100644
index 805dfd40030dc..0000000000000
--- a/arch/arm/boot/dts/omap4-duovero.dtsi
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- */
-
-#include "omap443x.dtsi"
-#include "omap4-mcpdm.dtsi"
-
-/ {
-	model = "Gumstix Duovero";
-	compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "DuoVero";
-
-		ti,mclk-freq = <38400000>;
-
-		ti,mcpdm = <&mcpdm>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias";
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;	/* gpio_62 */
-		#phy-cells = <0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&hsusb1phy_pins>;
-
-		clocks = <&auxclk3_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	/* regulator for w2cbw0015 on sdio5 */
-	w2cbw0015_vmmc: w2cbw0015_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&w2cbw0015_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "w2cbw0015";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;		/* gpio_43 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&twl6040_pins
-			&hsusbb1_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_nxt.gpio_160 */
-			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
-		>;
-	};
-
-	hsusbb1_pins: pinmux_hsusbb1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
-			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
-			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
-			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
-			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
-			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
-			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
-			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
-			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
-			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
-			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
-			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
-		>;
-	};
-
-	hsusb1phy_pins: pinmux_hsusb1phy_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_wait1.gpio_62 */
-		>;
-	};
-
-	w2cbw0015_pins: pinmux_w2cbw0015_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
-			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_cmd */
-			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_dat0 */
-			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
-			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
-			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
-		>;
-	};
-
-	mmc5_pins: pinmux_mmc5_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk */
-			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_cmd */
-			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_dat0 */
-			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1 */
-			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2 */
-			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3 */
-		>;
-	};
-};
-
-/* PMIC */
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_1N cascaded to gic */
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		#clock-cells = <0>;
-		reg = <0x4b>;
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>;		/* gpio_160 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-/* on-board bluetooth / WiFi module */
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-
-	vmmc-supply = <&vmmc>;
-	ti,bus-width = <4>;
-	ti,non-removable;		/* FIXME: use PMIC_MMC detect */
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-/* mmc3 is available to the expansion board */
-
-&mmc4 {
-	status = "disabled";
-};
-
-/* on-board WiFi module */
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc5_pins>;
-
-	vmmc-supply = <&w2cbw0015_vmmc>;
-	ti,bus-width = <4>;
-	ti,non-removable;
-	cap-power-off-card;
-	keep-power-in-suspend;
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
-
diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts
deleted file mode 100644
index e59d17b25a1d9..0000000000000
--- a/arch/arm/boot/dts/omap4-kc1.dts
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Paul Kocialkowski <contact@paulk.fr>
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-
-/ {
-	model = "Amazon Kindle Fire (first generation)";
-	compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	led-controller {
-		compatible = "pwm-leds";
-
-		led-1 {
-			label = "green";
-			pwms = <&twl_pwm 0 7812500>;
-			max-brightness = <127>;
-		};
-
-		led-2 {
-			label = "orange";
-			pwms = <&twl_pwm 1 7812500>;
-			max-brightness = <127>;
-		};
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx */
-			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat0 */
-			OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat1 */
-			OMAP4_IOPAD(0x044, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat2 */
-			OMAP4_IOPAD(0x046, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat3 */
-			OMAP4_IOPAD(0x048, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat4 */
-			OMAP4_IOPAD(0x04a, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat5 */
-			OMAP4_IOPAD(0x04c, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat6 */
-			OMAP4_IOPAD(0x04e, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat7 */
-			OMAP4_IOPAD(0x082, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_clk */
-			OMAP4_IOPAD(0x084, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_cmd */
-		>;
-	};
-
-	usb_otg_hs_pins: pinmux_usb_otg_hs_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* usba0_otg_ce */
-			OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)		/* usba0_otg_dp */
-			OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)		/* usba0_otg_dm */
-		>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART3_RX>;
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* IRQ# = 7 */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-
-		twl_power: power {
-			compatible = "ti,twl6030-power";
-			ti,system-power-controller;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	status = "disabled";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-
-	vmmc-supply = <&vaux1>;
-	ti,non-removable;
-	bus-width = <8>;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb_otg_hs_pins>;
-
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi
deleted file mode 100644
index 7ae8b620515c5..0000000000000
--- a/arch/arm/boot/dts/omap4-l4-abe.dtsi
+++ /dev/null
@@ -1,497 +0,0 @@
-&l4_abe {						/* 0x40100000 */
-	compatible = "ti,omap4-l4-abe", "simple-pm-bus";
-	reg = <0x40100000 0x400>,
-	      <0x40100400 0x400>;
-	reg-names = "la", "ap";
-	power-domains = <&prm_abe>;
-	/* OMAP4_L4_ABE_CLKCTRL is read-only */
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x40100000 0x100000>,	/* segment 0 */
-		 <0x49000000 0x49000000 0x100000>;
-	segment@0 {					/* 0x40100000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges =
-			 /* CPU to L4 ABE mapping */
-			 <0x00000000 0x00000000 0x000400>,	/* ap 0 */
-			 <0x00000400 0x00000400 0x000400>,	/* ap 1 */
-			 <0x00022000 0x00022000 0x001000>,	/* ap 2 */
-			 <0x00023000 0x00023000 0x001000>,	/* ap 3 */
-			 <0x00024000 0x00024000 0x001000>,	/* ap 4 */
-			 <0x00025000 0x00025000 0x001000>,	/* ap 5 */
-			 <0x00026000 0x00026000 0x001000>,	/* ap 6 */
-			 <0x00027000 0x00027000 0x001000>,	/* ap 7 */
-			 <0x00028000 0x00028000 0x001000>,	/* ap 8 */
-			 <0x00029000 0x00029000 0x001000>,	/* ap 9 */
-			 <0x0002a000 0x0002a000 0x001000>,	/* ap 10 */
-			 <0x0002b000 0x0002b000 0x001000>,	/* ap 11 */
-			 <0x0002e000 0x0002e000 0x001000>,	/* ap 12 */
-			 <0x0002f000 0x0002f000 0x001000>,	/* ap 13 */
-			 <0x00030000 0x00030000 0x001000>,	/* ap 14 */
-			 <0x00031000 0x00031000 0x001000>,	/* ap 15 */
-			 <0x00032000 0x00032000 0x001000>,	/* ap 16 */
-			 <0x00033000 0x00033000 0x001000>,	/* ap 17 */
-			 <0x00038000 0x00038000 0x001000>,	/* ap 18 */
-			 <0x00039000 0x00039000 0x001000>,	/* ap 19 */
-			 <0x0003a000 0x0003a000 0x001000>,	/* ap 20 */
-			 <0x0003b000 0x0003b000 0x001000>,	/* ap 21 */
-			 <0x0003c000 0x0003c000 0x001000>,	/* ap 22 */
-			 <0x0003d000 0x0003d000 0x001000>,	/* ap 23 */
-			 <0x0003e000 0x0003e000 0x001000>,	/* ap 24 */
-			 <0x0003f000 0x0003f000 0x001000>,	/* ap 25 */
-			 <0x00080000 0x00080000 0x010000>,	/* ap 26 */
-			 <0x00080000 0x00080000 0x001000>,	/* ap 27 */
-			 <0x000a0000 0x000a0000 0x010000>,	/* ap 28 */
-			 <0x000a0000 0x000a0000 0x001000>,	/* ap 29 */
-			 <0x000c0000 0x000c0000 0x010000>,	/* ap 30 */
-			 <0x000c0000 0x000c0000 0x001000>,	/* ap 31 */
-			 <0x000f1000 0x000f1000 0x001000>,	/* ap 32 */
-			 <0x000f2000 0x000f2000 0x001000>,	/* ap 33 */
-
-			 /* L3 to L4 ABE mapping */
-			 <0x49000000 0x49000000 0x000400>,	/* ap 0 */
-			 <0x49000400 0x49000400 0x000400>,	/* ap 1 */
-			 <0x49022000 0x49022000 0x001000>,	/* ap 2 */
-			 <0x49023000 0x49023000 0x001000>,	/* ap 3 */
-			 <0x49024000 0x49024000 0x001000>,	/* ap 4 */
-			 <0x49025000 0x49025000 0x001000>,	/* ap 5 */
-			 <0x49026000 0x49026000 0x001000>,	/* ap 6 */
-			 <0x49027000 0x49027000 0x001000>,	/* ap 7 */
-			 <0x49028000 0x49028000 0x001000>,	/* ap 8 */
-			 <0x49029000 0x49029000 0x001000>,	/* ap 9 */
-			 <0x4902a000 0x4902a000 0x001000>,	/* ap 10 */
-			 <0x4902b000 0x4902b000 0x001000>,	/* ap 11 */
-			 <0x4902e000 0x4902e000 0x001000>,	/* ap 12 */
-			 <0x4902f000 0x4902f000 0x001000>,	/* ap 13 */
-			 <0x49030000 0x49030000 0x001000>,	/* ap 14 */
-			 <0x49031000 0x49031000 0x001000>,	/* ap 15 */
-			 <0x49032000 0x49032000 0x001000>,	/* ap 16 */
-			 <0x49033000 0x49033000 0x001000>,	/* ap 17 */
-			 <0x49038000 0x49038000 0x001000>,	/* ap 18 */
-			 <0x49039000 0x49039000 0x001000>,	/* ap 19 */
-			 <0x4903a000 0x4903a000 0x001000>,	/* ap 20 */
-			 <0x4903b000 0x4903b000 0x001000>,	/* ap 21 */
-			 <0x4903c000 0x4903c000 0x001000>,	/* ap 22 */
-			 <0x4903d000 0x4903d000 0x001000>,	/* ap 23 */
-			 <0x4903e000 0x4903e000 0x001000>,	/* ap 24 */
-			 <0x4903f000 0x4903f000 0x001000>,	/* ap 25 */
-			 <0x49080000 0x49080000 0x010000>,	/* ap 26 */
-			 <0x49080000 0x49080000 0x001000>,	/* ap 27 */
-			 <0x490a0000 0x490a0000 0x010000>,	/* ap 28 */
-			 <0x490a0000 0x490a0000 0x001000>,	/* ap 29 */
-			 <0x490c0000 0x490c0000 0x010000>,	/* ap 30 */
-			 <0x490c0000 0x490c0000 0x001000>,	/* ap 31 */
-			 <0x490f1000 0x490f1000 0x001000>,	/* ap 32 */
-			 <0x490f2000 0x490f2000 0x001000>;	/* ap 33 */
-
-		target-module@22000 {			/* 0x40122000, ap 2 02.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x2208c 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP4_MCBSP1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x22000 0x1000>,
-				 <0x49022000 0x49022000 0x1000>;
-
-			mcbsp1: mcbsp@0 {
-				compatible = "ti,omap4-mcbsp";
-				reg = <0x0 0xff>, /* MPU private access */
-				      <0x49022000 0xff>; /* L3 Interconnect */
-				reg-names = "mpu", "dma";
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "common";
-				ti,buffer-size = <128>;
-				dmas = <&sdma 33>,
-				       <&sdma 34>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-		};
-
-		target-module@24000 {			/* 0x40124000, ap 4 04.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x2408c 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP4_MCBSP2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x24000 0x1000>,
-				 <0x49024000 0x49024000 0x1000>;
-
-			mcbsp2: mcbsp@0 {
-				compatible = "ti,omap4-mcbsp";
-				reg = <0x0 0xff>, /* MPU private access */
-				      <0x49024000 0xff>; /* L3 Interconnect */
-				reg-names = "mpu", "dma";
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "common";
-				ti,buffer-size = <128>;
-				dmas = <&sdma 17>,
-				       <&sdma 18>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-		};
-
-		target-module@26000 {			/* 0x40126000, ap 6 06.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x2608c 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP4_MCBSP3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x26000 0x1000>,
-				 <0x49026000 0x49026000 0x1000>;
-
-			mcbsp3: mcbsp@0 {
-				compatible = "ti,omap4-mcbsp";
-				reg = <0x0 0xff>, /* MPU private access */
-				      <0x49026000 0xff>; /* L3 Interconnect */
-				reg-names = "mpu", "dma";
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "common";
-				ti,buffer-size = <128>;
-				dmas = <&sdma 19>,
-				       <&sdma 20>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-		};
-
-		target-module@28000 {			/* 0x40128000, ap 8 08.0 */
-							/* 0x4012a000, ap 10 0a.0 */
-			compatible = "ti,sysc-mcasp", "ti,sysc";
-			reg = <0x28000 0x4>,
-			      <0x28004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x28000 0x1000>,
-				 <0x49028000 0x49028000 0x1000>,
-				 <0x2000 0x2a000 0x1000>,
-				 <0x4902a000 0x4902a000 0x1000>;
-
-			mcasp0: mcasp@0 {
-				compatible = "ti,omap4-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x4902a000 0x1000>;	/* L3 data port */
-				reg-names = "mpu","dat";
-				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx";
-				dmas = <&sdma 8>;
-				dma-names = "tx";
-				clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
-				clock-names = "fck";
-				op-mode = <1>;	/* MCASP_DIT_MODE */
-				serial-dir = < 1 >; /* 1 TX serializers */
-				status = "disabled";
-			};
-		};
-
-		target-module@2e000 {			/* 0x4012e000, ap 12 0c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x2e000 0x4>,
-			      <0x2e010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP4_DMIC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2e000 0x1000>,
-				 <0x4902e000 0x4902e000 0x1000>;
-
-			dmic: dmic@0 {
-				compatible = "ti,omap4-dmic";
-				reg = <0x0 0x7f>, /* MPU private access */
-				      <0x4902e000 0x7f>; /* L3 Interconnect */
-				reg-names = "mpu", "dma";
-				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 67>;
-				dma-names = "up_link";
-				status = "disabled";
-			};
-		};
-
-		target-module@30000 {			/* 0x40130000, ap 14 0e.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x30000 0x4>,
-			      <0x30010 0x4>,
-			      <0x30014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x30000 0x1000>,
-				 <0x49030000 0x49030000 0x1000>;
-
-			wdt3: wdt@0 {
-				compatible = "ti,omap4-wdt", "ti,omap3-wdt";
-				reg = <0x0 0x80>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		mcpdm_module: target-module@32000 {	/* 0x40132000, ap 16 10.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x32000 0x4>,
-			      <0x32010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP4_MCPDM_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x32000 0x1000>,
-				 <0x49032000 0x49032000 0x1000>;
-
-			/* Must be only enabled for boards with pdmclk wired */
-			status = "disabled";
-
-			mcpdm: mcpdm@0 {
-				compatible = "ti,omap4-mcpdm";
-				reg = <0x0 0x7f>, /* MPU private access */
-				      <0x49032000 0x7f>; /* L3 Interconnect */
-				reg-names = "mpu", "dma";
-				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 65>,
-				       <&sdma 66>;
-				dma-names = "up_link", "dn_link";
-			};
-		};
-
-		target-module@38000 {			/* 0x40138000, ap 18 12.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x38000 0x4>,
-			      <0x38010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x38000 0x1000>,
-				 <0x49038000 0x49038000 0x1000>;
-
-			timer5: timer@0 {
-				compatible = "ti,omap4430-timer";
-				reg = <0x00000000 0x80>,
-				      <0x49038000 0x80>;
-				clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 24>,
-					 <&syc_clk_div_ck>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-dsp;
-			};
-		};
-
-		target-module@3a000 {			/* 0x4013a000, ap 20 14.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x3a000 0x4>,
-			      <0x3a010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3a000 0x1000>,
-				 <0x4903a000 0x4903a000 0x1000>;
-
-			timer6: timer@0 {
-				compatible = "ti,omap4430-timer";
-				reg = <0x00000000 0x80>,
-				      <0x4903a000 0x80>;
-				clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 24>,
-					 <&syc_clk_div_ck>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-dsp;
-			};
-		};
-
-		target-module@3c000 {			/* 0x4013c000, ap 22 16.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x3c000 0x4>,
-			      <0x3c010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3c000 0x1000>,
-				 <0x4903c000 0x4903c000 0x1000>;
-
-			timer7: timer@0 {
-				compatible = "ti,omap4430-timer";
-				reg = <0x00000000 0x80>,
-				      <0x4903c000 0x80>;
-				clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 24>,
-					 <&syc_clk_div_ck>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-dsp;
-			};
-		};
-
-		target-module@3e000 {			/* 0x4013e000, ap 24 18.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x3e000 0x4>,
-			      <0x3e010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3e000 0x1000>,
-				 <0x4903e000 0x4903e000 0x1000>;
-
-			timer8: timer@0 {
-				compatible = "ti,omap4430-timer";
-				reg = <0x00000000 0x80>,
-				      <0x4903e000 0x80>;
-				clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>,
-					 <&syc_clk_div_ck>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-				ti,timer-dsp;
-			};
-		};
-
-		target-module@80000 {			/* 0x40180000, ap 26 1a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x80000 0x10000>,
-				 <0x49080000 0x49080000 0x10000>;
-		};
-
-		target-module@a0000 {			/* 0x401a0000, ap 28 1c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa0000 0x10000>,
-				 <0x490a0000 0x490a0000 0x10000>;
-		};
-
-		target-module@c0000 {			/* 0x401c0000, ap 30 1e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc0000 0x10000>,
-				 <0x490c0000 0x490c0000 0x10000>;
-		};
-
-		target-module@f1000 {			/* 0x401f1000, ap 32 20.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xf1000 0x4>,
-			      <0xf1010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xf1000 0x1000>,
-				 <0x490f1000 0x490f1000 0x1000>;
-
-			/*
-			 * No child device binding or driver in mainline.
-			 * See Android tree and related upstreaming efforts
-			 * for the old driver.
-			 */
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
deleted file mode 100644
index 46b8f9efd4131..0000000000000
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ /dev/null
@@ -1,2483 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-&l4_cfg {						/* 0x4a000000 */
-	compatible = "ti,omap4-l4-cfg", "simple-pm-bus";
-	power-domains = <&prm_core>;
-	clocks = <&l4_cfg_clkctrl OMAP4_L4_CFG_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x4a000000 0x800>,
-	      <0x4a000800 0x800>,
-	      <0x4a001000 0x1000>;
-	reg-names = "ap", "la", "ia0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x4a000000 0x080000>,	/* segment 0 */
-		 <0x00080000 0x4a080000 0x080000>,	/* segment 1 */
-		 <0x00100000 0x4a100000 0x080000>,	/* segment 2 */
-		 <0x00180000 0x4a180000 0x080000>,	/* segment 3 */
-		 <0x00200000 0x4a200000 0x080000>,	/* segment 4 */
-		 <0x00280000 0x4a280000 0x080000>,	/* segment 5 */
-		 <0x00300000 0x4a300000 0x080000>;	/* segment 6 */
-
-	segment@0 {					/* 0x4a000000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
-			 <0x00002000 0x00002000 0x001000>,	/* ap 3 */
-			 <0x00003000 0x00003000 0x001000>,	/* ap 4 */
-			 <0x00004000 0x00004000 0x001000>,	/* ap 5 */
-			 <0x00005000 0x00005000 0x001000>,	/* ap 6 */
-			 <0x00056000 0x00056000 0x001000>,	/* ap 7 */
-			 <0x00057000 0x00057000 0x001000>,	/* ap 8 */
-			 <0x0005c000 0x0005c000 0x001000>,	/* ap 9 */
-			 <0x00058000 0x00058000 0x004000>,	/* ap 10 */
-			 <0x00062000 0x00062000 0x001000>,	/* ap 11 */
-			 <0x00063000 0x00063000 0x001000>,	/* ap 12 */
-			 <0x00008000 0x00008000 0x002000>,	/* ap 23 */
-			 <0x0000a000 0x0000a000 0x001000>,	/* ap 24 */
-			 <0x00066000 0x00066000 0x001000>,	/* ap 25 */
-			 <0x00067000 0x00067000 0x001000>,	/* ap 26 */
-			 <0x0005e000 0x0005e000 0x002000>,	/* ap 80 */
-			 <0x00060000 0x00060000 0x001000>,	/* ap 81 */
-			 <0x00064000 0x00064000 0x001000>,	/* ap 86 */
-			 <0x00065000 0x00065000 0x001000>;	/* ap 87 */
-
-		target-module@2000 {			/* 0x4a002000, ap 3 06.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x2000 0x4>,
-			      <0x2010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2000 0x1000>;
-
-			omap4_scm_core: scm@0 {
-				compatible = "ti,omap4-scm-core", "simple-bus";
-				reg = <0x0 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x1000>;
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon";
-					reg = <0x0 0x800>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-				};
-
-				omap_control_usb2phy: control-phy@300 {
-					compatible = "ti,control-phy-usb2";
-					reg = <0x300 0x4>;
-					reg-names = "power";
-				};
-
-				omap_control_usbotg: control-phy@33c {
-					compatible = "ti,control-phy-otghs";
-					reg = <0x33c 0x4>;
-					reg-names = "otghs_control";
-				};
-			};
-		};
-
-		target-module@4000 {			/* 0x4a004000, ap 5 02.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x4000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-
-			cm1: cm1@0 {
-				compatible = "ti,omap4-cm1", "simple-bus";
-				reg = <0x0 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x2000>;
-
-				cm1_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				cm1_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		target-module@8000 {			/* 0x4a008000, ap 23 32.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x8000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8000 0x2000>;
-
-			cm2: cm2@0 {
-				compatible = "ti,omap4-cm2", "simple-bus";
-				reg = <0x0 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x2000>;
-
-				cm2_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				cm2_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		target-module@56000 {			/* 0x4a056000, ap 7 0a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x56000 0x4>,
-			      <0x5602c 0x4>,
-			      <0x56028 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l3_dma_clkdm */
-			clocks = <&l3_dma_clkctrl OMAP4_DMA_SYSTEM_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x56000 0x1000>;
-
-			sdma: dma-controller@0 {
-				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-				#dma-cells = <1>;
-				dma-channels = <32>;
-				dma-requests = <127>;
-			};
-		};
-
-		target-module@58000 {			/* 0x4a058000, ap 10 0e.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x58000 0x4>,
-			      <0x58010 0x4>,
-			      <0x58014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
-			clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x58000 0x5000>;
-
-			hsi: hsi@0 {
-				compatible = "ti,omap4-hsi";
-				reg = <0x0 0x4000>,
-				      <0x5000 0x1000>;
-				reg-names = "sys", "gdd";
-
-				clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
-				clock-names = "hsi_fck";
-
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "gdd_mpu";
-
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x4000>;
-
-				hsi_port1: hsi-port@2000 {
-					compatible = "ti,omap4-hsi-port";
-					reg = <0x2000 0x800>,
-					      <0x2800 0x800>;
-					reg-names = "tx", "rx";
-					interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				hsi_port2: hsi-port@3000 {
-					compatible = "ti,omap4-hsi-port";
-					reg = <0x3000 0x800>,
-					      <0x3800 0x800>;
-					reg-names = "tx", "rx";
-					interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-		};
-
-		target-module@5e000 {			/* 0x4a05e000, ap 80 68.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5e000 0x2000>;
-		};
-
-		target-module@62000 {			/* 0x4a062000, ap 11 16.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x62000 0x4>,
-			      <0x62010 0x4>,
-			      <0x62014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
-			clocks = <&l3_init_clkctrl OMAP4_USB_TLL_HS_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x62000 0x1000>;
-
-			usbhstll: usbhstll@0 {
-				compatible = "ti,usbhs-tll";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@64000 {			/* 0x4a064000, ap 86 1e.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x64000 0x4>,
-			      <0x64010 0x4>,
-			      <0x64014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
-			clocks = <&l3_init_clkctrl OMAP4_USB_HOST_HS_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x64000 0x1000>;
-
-			usbhshost: usbhshost@0 {
-				compatible = "ti,usbhs-host";
-				reg = <0x0 0x800>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x1000>;
-				clocks = <&init_60m_fclk>,
-					 <&xclk60mhsp1_ck>,
-					 <&xclk60mhsp2_ck>;
-				clock-names = "refclk_60m_int",
-					      "refclk_60m_ext_p1",
-					      "refclk_60m_ext_p2";
-
-				usbhsohci: ohci@800 {
-					compatible = "ti,ohci-omap3";
-					reg = <0x800 0x400>;
-					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-					remote-wakeup-connected;
-				};
-
-				usbhsehci: ehci@c00 {
-					compatible = "ti,ehci-omap";
-					reg = <0xc00 0x400>;
-					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-		};
-
-		target-module@66000 {			/* 0x4a066000, ap 25 26.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x66000 0x4>,
-			      <0x66010 0x4>,
-			      <0x66014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */
-			clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
-			clock-names = "fck";
-			power-domains = <&prm_tesla>;
-			resets = <&prm_tesla 1>;
-			reset-names = "rstctrl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x66000 0x1000>;
-
-			mmu_dsp: mmu@0 {
-				compatible = "ti,omap4-iommu";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				#iommu-cells = <0>;
-			};
-		};
-	};
-
-	segment@80000 {					/* 0x4a080000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00059000 0x000d9000 0x001000>,	/* ap 13 */
-			 <0x0005a000 0x000da000 0x001000>,	/* ap 14 */
-			 <0x0005b000 0x000db000 0x001000>,	/* ap 15 */
-			 <0x0005c000 0x000dc000 0x001000>,	/* ap 16 */
-			 <0x0005d000 0x000dd000 0x001000>,	/* ap 17 */
-			 <0x0005e000 0x000de000 0x001000>,	/* ap 18 */
-			 <0x00060000 0x000e0000 0x001000>,	/* ap 19 */
-			 <0x00061000 0x000e1000 0x001000>,	/* ap 20 */
-			 <0x00074000 0x000f4000 0x001000>,	/* ap 27 */
-			 <0x00075000 0x000f5000 0x001000>,	/* ap 28 */
-			 <0x00076000 0x000f6000 0x001000>,	/* ap 29 */
-			 <0x00077000 0x000f7000 0x001000>,	/* ap 30 */
-			 <0x00036000 0x000b6000 0x001000>,	/* ap 69 */
-			 <0x00037000 0x000b7000 0x001000>,	/* ap 70 */
-			 <0x0004d000 0x000cd000 0x001000>,	/* ap 78 */
-			 <0x0004e000 0x000ce000 0x001000>,	/* ap 79 */
-			 <0x00029000 0x000a9000 0x001000>,	/* ap 82 */
-			 <0x0002a000 0x000aa000 0x001000>,	/* ap 83 */
-			 <0x0002b000 0x000ab000 0x001000>,	/* ap 84 */
-			 <0x0002c000 0x000ac000 0x001000>,	/* ap 85 */
-			 <0x0002d000 0x000ad000 0x001000>,	/* ap 88 */
-			 <0x0002e000 0x000ae000 0x001000>;	/* ap 89 */
-
-		target-module@29000 {			/* 0x4a0a9000, ap 82 04.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x29000 0x1000>;
-		};
-
-		target-module@2b000 {			/* 0x4a0ab000, ap 84 12.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x2b400 0x4>,
-			      <0x2b404 0x4>,
-			      <0x2b408 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
-			clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2b000 0x1000>;
-
-			usb_otg_hs: usb_otg_hs@0 {
-				compatible = "ti,omap4-musb";
-				reg = <0x0 0x7ff>;
-				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "mc", "dma";
-				usb-phy = <&usb2_phy>;
-				phys = <&usb2_phy>;
-				phy-names = "usb2-phy";
-				multipoint = <1>;
-				num-eps = <16>;
-				ram-bits = <12>;
-				ctrl-module = <&omap_control_usbotg>;
-			};
-		};
-
-		target-module@2d000 {			/* 0x4a0ad000, ap 88 0c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x2d000 0x4>,
-			      <0x2d010 0x4>,
-			      <0x2d014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
-			clocks = <&l3_init_clkctrl OMAP4_OCP2SCP_USB_PHY_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2d000 0x1000>;
-
-			ocp2scp@0 {
-				compatible = "ti,omap-ocp2scp";
-				reg = <0x0 0x1f>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x1000>;
-				usb2_phy: usb2phy@80 {
-					compatible = "ti,omap-usb2";
-					reg = <0x80 0x58>;
-					ctrl-module = <&omap_control_usb2phy>;
-					clocks = <&usb_phy_cm_clk32k>;
-					clock-names = "wkupclk";
-					#phy-cells = <0>;
-				};
-			};
-		};
-
-		/* d2d mdm */
-		target-module@36000 {			/* 0x4a0b6000, ap 69 60.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x36000 0x4>,
-			      <0x36010 0x4>,
-			      <0x36014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */
-			clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x36000 0x1000>;
-		};
-
-		/* d2d mpu */
-		target-module@4d000 {			/* 0x4a0cd000, ap 78 58.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4d000 0x4>,
-			      <0x4d010 0x4>,
-			      <0x4d014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */
-			clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4d000 0x1000>;
-		};
-
-		target-module@59000 {			/* 0x4a0d9000, ap 13 1a.0 */
-			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			reg = <0x59038 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
-			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x59000 0x1000>;
-
-			smartreflex_mpu: smartreflex@0 {
-				compatible = "ti,omap4-smartreflex-mpu";
-				reg = <0x0 0x80>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@5b000 {			/* 0x4a0db000, ap 15 08.0 */
-			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			reg = <0x5b038 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
-			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5b000 0x1000>;
-
-			smartreflex_iva: smartreflex@0 {
-				compatible = "ti,omap4-smartreflex-iva";
-				reg = <0x0 0x80>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@5d000 {			/* 0x4a0dd000, ap 17 22.0 */
-			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			reg = <0x5d038 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
-			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5d000 0x1000>;
-
-			smartreflex_core: smartreflex@0 {
-				compatible = "ti,omap4-smartreflex-core";
-				reg = <0x0 0x80>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@60000 {			/* 0x4a0e0000, ap 19 1c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x60000 0x1000>;
-		};
-
-		target-module@74000 {			/* 0x4a0f4000, ap 27 24.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x74000 0x4>,
-			      <0x74010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
-			clocks = <&l4_cfg_clkctrl OMAP4_MAILBOX_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x74000 0x1000>;
-
-			mailbox: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <3>;
-				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox-ipu {
-					ti,mbox-tx = <0 0 0>;
-					ti,mbox-rx = <1 0 0>;
-				};
-				mbox_dsp: mbox-dsp {
-					ti,mbox-tx = <3 0 0>;
-					ti,mbox-rx = <2 0 0>;
-				};
-			};
-		};
-
-		target-module@76000 {			/* 0x4a0f6000, ap 29 3a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x76000 0x4>,
-			      <0x76010 0x4>,
-			      <0x76014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
-			clocks = <&l4_cfg_clkctrl OMAP4_SPINLOCK_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x76000 0x1000>;
-
-			hwspinlock: spinlock@0 {
-				compatible = "ti,omap4-hwspinlock";
-				reg = <0x0 0x1000>;
-				#hwlock-cells = <1>;
-			};
-		};
-	};
-
-	segment@100000 {					/* 0x4a100000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00100000 0x001000>,	/* ap 21 */
-			 <0x00001000 0x00101000 0x001000>,	/* ap 22 */
-			 <0x00002000 0x00102000 0x001000>,	/* ap 61 */
-			 <0x00003000 0x00103000 0x001000>,	/* ap 62 */
-			 <0x00008000 0x00108000 0x001000>,	/* ap 63 */
-			 <0x00009000 0x00109000 0x001000>,	/* ap 64 */
-			 <0x0000a000 0x0010a000 0x001000>,	/* ap 65 */
-			 <0x0000b000 0x0010b000 0x001000>;	/* ap 66 */
-
-		target-module@0 {			/* 0x4a100000, ap 21 2a.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x0 0x4>,
-			      <0x10 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x1000>;
-
-			omap4_pmx_core: pinmux@40 {
-				compatible = "ti,omap4-padconf",
-					     "pinctrl-single";
-				reg = <0x40 0x0196>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#pinctrl-cells = <1>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				pinctrl-single,register-width = <16>;
-				pinctrl-single,function-mask = <0x7fff>;
-			};
-
-			omap4_padconf_global: omap4_padconf_global@5a0 {
-				compatible = "syscon",
-					     "simple-bus";
-				reg = <0x5a0 0x170>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x5a0 0x170>;
-
-				pbias_regulator: pbias_regulator@60 {
-					compatible = "ti,pbias-omap4", "ti,pbias-omap";
-					reg = <0x60 0x4>;
-					syscon = <&omap4_padconf_global>;
-					pbias_mmc_reg: pbias_mmc_omap4 {
-						regulator-name = "pbias_mmc_omap4";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <3000000>;
-					};
-				};
-			};
-		};
-
-		target-module@2000 {			/* 0x4a102000, ap 61 3c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2000 0x1000>;
-		};
-
-		target-module@8000 {			/* 0x4a108000, ap 63 62.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8000 0x1000>;
-		};
-
-		target-module@a000 {			/* 0x4a10a000, ap 65 50.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xa000 0x4>,
-			      <0xa010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-delay-us = <2>;
-			/* Domains (V, P, C): core, cam_pwrdm, iss_clkdm */
-			clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa000 0x1000>;
-
-			/* No child device binding or driver in mainline */
-		};
-	};
-
-	segment@180000 {					/* 0x4a180000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	segment@200000 {					/* 0x4a200000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0001e000 0x0021e000 0x001000>,	/* ap 31 */
-			 <0x0001f000 0x0021f000 0x001000>,	/* ap 32 */
-			 <0x0000a000 0x0020a000 0x001000>,	/* ap 33 */
-			 <0x0000b000 0x0020b000 0x001000>,	/* ap 34 */
-			 <0x00004000 0x00204000 0x001000>,	/* ap 35 */
-			 <0x00005000 0x00205000 0x001000>,	/* ap 36 */
-			 <0x00006000 0x00206000 0x001000>,	/* ap 37 */
-			 <0x00007000 0x00207000 0x001000>,	/* ap 38 */
-			 <0x00012000 0x00212000 0x001000>,	/* ap 39 */
-			 <0x00013000 0x00213000 0x001000>,	/* ap 40 */
-			 <0x0000c000 0x0020c000 0x001000>,	/* ap 41 */
-			 <0x0000d000 0x0020d000 0x001000>,	/* ap 42 */
-			 <0x00010000 0x00210000 0x001000>,	/* ap 43 */
-			 <0x00011000 0x00211000 0x001000>,	/* ap 44 */
-			 <0x00016000 0x00216000 0x001000>,	/* ap 45 */
-			 <0x00017000 0x00217000 0x001000>,	/* ap 46 */
-			 <0x00014000 0x00214000 0x001000>,	/* ap 47 */
-			 <0x00015000 0x00215000 0x001000>,	/* ap 48 */
-			 <0x00018000 0x00218000 0x001000>,	/* ap 49 */
-			 <0x00019000 0x00219000 0x001000>,	/* ap 50 */
-			 <0x00020000 0x00220000 0x001000>,	/* ap 51 */
-			 <0x00021000 0x00221000 0x001000>,	/* ap 52 */
-			 <0x00026000 0x00226000 0x001000>,	/* ap 53 */
-			 <0x00027000 0x00227000 0x001000>,	/* ap 54 */
-			 <0x00028000 0x00228000 0x001000>,	/* ap 55 */
-			 <0x00029000 0x00229000 0x001000>,	/* ap 56 */
-			 <0x0002a000 0x0022a000 0x001000>,	/* ap 57 */
-			 <0x0002b000 0x0022b000 0x001000>,	/* ap 58 */
-			 <0x0001c000 0x0021c000 0x001000>,	/* ap 59 */
-			 <0x0001d000 0x0021d000 0x001000>;	/* ap 60 */
-
-		target-module@4000 {			/* 0x4a204000, ap 35 42.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-		};
-
-		target-module@6000 {			/* 0x4a206000, ap 37 4a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6000 0x1000>;
-		};
-
-		target-module@a000 {			/* 0x4a20a000, ap 33 2c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa000 0x1000>;
-		};
-
-		target-module@c000 {			/* 0x4a20c000, ap 41 20.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc000 0x1000>;
-		};
-
-		target-module@10000 {			/* 0x4a210000, ap 43 52.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x10000 0x1000>;
-		};
-
-		target-module@12000 {			/* 0x4a212000, ap 39 18.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x12000 0x1000>;
-		};
-
-		target-module@14000 {			/* 0x4a214000, ap 47 30.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x14000 0x1000>;
-		};
-
-		target-module@16000 {			/* 0x4a216000, ap 45 28.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x16000 0x1000>;
-		};
-
-		target-module@18000 {			/* 0x4a218000, ap 49 38.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x18000 0x1000>;
-		};
-
-		target-module@1c000 {			/* 0x4a21c000, ap 59 5a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1c000 0x1000>;
-		};
-
-		target-module@1e000 {			/* 0x4a21e000, ap 31 10.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1e000 0x1000>;
-		};
-
-		target-module@20000 {			/* 0x4a220000, ap 51 40.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x20000 0x1000>;
-		};
-
-		target-module@26000 {			/* 0x4a226000, ap 53 34.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x26000 0x1000>;
-		};
-
-		target-module@28000 {			/* 0x4a228000, ap 55 2e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x28000 0x1000>;
-		};
-
-		target-module@2a000 {			/* 0x4a22a000, ap 57 48.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2a000 0x1000>;
-		};
-	};
-
-	segment@280000 {					/* 0x4a280000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	l4_cfg_segment_300000: segment@300000 {			/* 0x4a300000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00300000 0x020000>,	/* ap 67 */
-			 <0x00040000 0x00340000 0x001000>,	/* ap 68 */
-			 <0x00020000 0x00320000 0x004000>,	/* ap 71 */
-			 <0x00024000 0x00324000 0x002000>,	/* ap 72 */
-			 <0x00026000 0x00326000 0x001000>,	/* ap 73 */
-			 <0x00027000 0x00327000 0x001000>,	/* ap 74 */
-			 <0x00028000 0x00328000 0x001000>,	/* ap 75 */
-			 <0x00029000 0x00329000 0x001000>,	/* ap 76 */
-			 <0x00030000 0x00330000 0x010000>,	/* ap 77 */
-			 <0x0002a000 0x0032a000 0x002000>,	/* ap 90 */
-			 <0x0002c000 0x0032c000 0x004000>;	/* ap 91 */
-
-		l4_cfg_target_0: target-module@0 {	/* 0x4a300000, ap 67 14.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00000000 0x00020000>,
-				 <0x00020000 0x00020000 0x00004000>,
-				 <0x00024000 0x00024000 0x00002000>,
-				 <0x00026000 0x00026000 0x00001000>,
-				 <0x00027000 0x00027000 0x00001000>,
-				 <0x00028000 0x00028000 0x00001000>,
-				 <0x00029000 0x00029000 0x00001000>,
-				 <0x0002a000 0x0002a000 0x00002000>,
-				 <0x0002c000 0x0002c000 0x00004000>,
-				 <0x00030000 0x00030000 0x00010000>;
-		};
-	};
-};
-
-&l4_wkup {						/* 0x4a300000 */
-	compatible = "ti,omap4-l4-wkup", "simple-pm-bus";
-	power-domains = <&prm_wkup>;
-	clocks = <&l4_wkup_clkctrl OMAP4_L4_WKUP_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x4a300000 0x800>,
-	      <0x4a300800 0x800>,
-	      <0x4a301000 0x1000>;
-	reg-names = "ap", "la", "ia0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x4a300000 0x010000>,	/* segment 0 */
-		 <0x00010000 0x4a310000 0x010000>,	/* segment 1 */
-		 <0x00020000 0x4a320000 0x010000>;	/* segment 2 */
-
-	segment@0 {					/* 0x4a300000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
-			 <0x00006000 0x00006000 0x002000>,	/* ap 3 */
-			 <0x00008000 0x00008000 0x001000>,	/* ap 4 */
-			 <0x0000a000 0x0000a000 0x001000>,	/* ap 15 */
-			 <0x0000b000 0x0000b000 0x001000>,	/* ap 16 */
-			 <0x00004000 0x00004000 0x001000>,	/* ap 17 */
-			 <0x00005000 0x00005000 0x001000>,	/* ap 18 */
-			 <0x0000c000 0x0000c000 0x001000>,	/* ap 19 */
-			 <0x0000d000 0x0000d000 0x001000>;	/* ap 20 */
-
-		target-module@4000 {			/* 0x4a304000, ap 17 24.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4000 0x4>,
-			      <0x4004 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl OMAP4_COUNTER_32K_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-
-			counter32k: counter@0 {
-				compatible = "ti,omap-counter32k";
-				reg = <0x0 0x20>;
-			};
-		};
-
-		target-module@6000 {			/* 0x4a306000, ap 3 08.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x6000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6000 0x2000>;
-
-			prm: prm@0 {
-				compatible = "ti,omap4-prm", "simple-bus";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x2000>;
-
-				prm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prm_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		target-module@a000 {			/* 0x4a30a000, ap 15 34.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xa000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa000 0x1000>;
-
-			scrm: scrm@0 {
-				compatible = "ti,omap4-scrm";
-				reg = <0x0 0x2000>;
-
-				scrm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				scrm_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		target-module@c000 {			/* 0x4a30c000, ap 19 2c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xc000 0x4>,
-			      <0xc010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc000 0x1000>;
-
-			omap4_scm_wkup: scm@c000 {
-				compatible = "ti,omap4-scm-wkup";
-				reg = <0xc000 0x1000>;
-			};
-		};
-	};
-
-	segment@10000 {					/* 0x4a310000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
-			 <0x00001000 0x00011000 0x001000>,	/* ap 6 */
-			 <0x00004000 0x00014000 0x001000>,	/* ap 7 */
-			 <0x00005000 0x00015000 0x001000>,	/* ap 8 */
-			 <0x00008000 0x00018000 0x001000>,	/* ap 9 */
-			 <0x00009000 0x00019000 0x001000>,	/* ap 10 */
-			 <0x0000c000 0x0001c000 0x001000>,	/* ap 11 */
-			 <0x0000d000 0x0001d000 0x001000>,	/* ap 12 */
-			 <0x0000e000 0x0001e000 0x001000>,	/* ap 21 */
-			 <0x0000f000 0x0001f000 0x001000>;	/* ap 22 */
-
-		gpio1_target: target-module@0 {			/* 0x4a310000, ap 5 14.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x0 0x4>,
-			      <0x10 0x4>,
-			      <0x114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 0>,
-				 <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x1000>;
-
-			gpio1: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				ti,gpio-always-on;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@4000 {			/* 0x4a314000, ap 7 18.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4000 0x4>,
-			      <0x4010 0x4>,
-			      <0x4014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl OMAP4_WD_TIMER2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-
-			wdt2: wdt@0 {
-				compatible = "ti,omap4-wdt", "ti,omap3-wdt";
-				reg = <0x0 0x80>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		timer1_target: target-module@8000 {	/* 0x4a318000, ap 9 1c.0 */
-			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			reg = <0x8000 0x4>,
-			      <0x8010 0x4>,
-			      <0x8014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8000 0x1000>;
-
-			timer1: timer@0 {
-				compatible = "ti,omap3430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>,
-					 <&sys_clkin_ck>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-alwon;
-			};
-		};
-
-		target-module@c000 {			/* 0x4a31c000, ap 11 20.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xc000 0x4>,
-			      <0xc010 0x4>,
-			      <0xc014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
-			clocks = <&l4_wkup_clkctrl OMAP4_KBD_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc000 0x1000>;
-
-			keypad: keypad@0 {
-				compatible = "ti,omap4-keypad";
-				reg = <0x0 0x80>;
-				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-				reg-names = "mpu";
-			};
-		};
-
-		target-module@e000 {			/* 0x4a31e000, ap 21 30.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xe000 0x4>,
-			      <0xe010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xe000 0x1000>;
-
-			omap4_pmx_wkup: pinmux@40 {
-				compatible = "ti,omap4-padconf",
-					     "pinctrl-single";
-				reg = <0x40 0x0038>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#pinctrl-cells = <1>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				pinctrl-single,register-width = <16>;
-				pinctrl-single,function-mask = <0x7fff>;
-			};
-		};
-	};
-
-	segment@20000 {					/* 0x4a320000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
-			 <0x0000a000 0x0002a000 0x001000>,	/* ap 14 */
-			 <0x00000000 0x00020000 0x001000>,	/* ap 23 */
-			 <0x00001000 0x00021000 0x001000>,	/* ap 24 */
-			 <0x00002000 0x00022000 0x001000>,	/* ap 25 */
-			 <0x00003000 0x00023000 0x001000>,	/* ap 26 */
-			 <0x00004000 0x00024000 0x001000>,	/* ap 27 */
-			 <0x00005000 0x00025000 0x001000>,	/* ap 28 */
-			 <0x00007000 0x00027000 0x000400>,	/* ap 29 */
-			 <0x00008000 0x00028000 0x000800>,	/* ap 30 */
-			 <0x00009000 0x00029000 0x000400>;	/* ap 31 */
-
-		target-module@0 {			/* 0x4a320000, ap 23 04.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x1000>;
-		};
-
-		target-module@2000 {			/* 0x4a322000, ap 25 0c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2000 0x1000>;
-		};
-
-		target-module@4000 {			/* 0x4a324000, ap 27 10.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-		};
-
-		target-module@6000 {			/* 0x4a326000, ap 13 28.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00006000 0x00001000>,
-				 <0x00001000 0x00007000 0x00000400>,
-				 <0x00002000 0x00008000 0x00000800>,
-				 <0x00003000 0x00009000 0x00000400>;
-		};
-	};
-};
-
-&l4_per {						/* 0x48000000 */
-	compatible = "ti,omap4-l4-per", "simple-pm-bus";
-	power-domains = <&prm_l4per>;
-	clocks = <&l4_per_clkctrl OMAP4_L4_PER_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x48000000 0x800>,
-	      <0x48000800 0x800>,
-	      <0x48001000 0x400>,
-	      <0x48001400 0x400>,
-	      <0x48001800 0x400>,
-	      <0x48001c00 0x400>;
-	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x48000000 0x200000>,	/* segment 0 */
-		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
-
-	segment@0 {					/* 0x48000000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00001000 0x00001000 0x000400>,	/* ap 1 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
-			 <0x00020000 0x00020000 0x001000>,	/* ap 3 */
-			 <0x00021000 0x00021000 0x001000>,	/* ap 4 */
-			 <0x00032000 0x00032000 0x001000>,	/* ap 5 */
-			 <0x00033000 0x00033000 0x001000>,	/* ap 6 */
-			 <0x00034000 0x00034000 0x001000>,	/* ap 7 */
-			 <0x00035000 0x00035000 0x001000>,	/* ap 8 */
-			 <0x00036000 0x00036000 0x001000>,	/* ap 9 */
-			 <0x00037000 0x00037000 0x001000>,	/* ap 10 */
-			 <0x0003e000 0x0003e000 0x001000>,	/* ap 11 */
-			 <0x0003f000 0x0003f000 0x001000>,	/* ap 12 */
-			 <0x00040000 0x00040000 0x010000>,	/* ap 13 */
-			 <0x00050000 0x00050000 0x001000>,	/* ap 14 */
-			 <0x00055000 0x00055000 0x001000>,	/* ap 15 */
-			 <0x00056000 0x00056000 0x001000>,	/* ap 16 */
-			 <0x00057000 0x00057000 0x001000>,	/* ap 17 */
-			 <0x00058000 0x00058000 0x001000>,	/* ap 18 */
-			 <0x00059000 0x00059000 0x001000>,	/* ap 19 */
-			 <0x0005a000 0x0005a000 0x001000>,	/* ap 20 */
-			 <0x0005b000 0x0005b000 0x001000>,	/* ap 21 */
-			 <0x0005c000 0x0005c000 0x001000>,	/* ap 22 */
-			 <0x0005d000 0x0005d000 0x001000>,	/* ap 23 */
-			 <0x0005e000 0x0005e000 0x001000>,	/* ap 24 */
-			 <0x00060000 0x00060000 0x001000>,	/* ap 25 */
-			 <0x0006a000 0x0006a000 0x001000>,	/* ap 26 */
-			 <0x0006b000 0x0006b000 0x001000>,	/* ap 27 */
-			 <0x0006c000 0x0006c000 0x001000>,	/* ap 28 */
-			 <0x0006d000 0x0006d000 0x001000>,	/* ap 29 */
-			 <0x0006e000 0x0006e000 0x001000>,	/* ap 30 */
-			 <0x0006f000 0x0006f000 0x001000>,	/* ap 31 */
-			 <0x00070000 0x00070000 0x001000>,	/* ap 32 */
-			 <0x00071000 0x00071000 0x001000>,	/* ap 33 */
-			 <0x00072000 0x00072000 0x001000>,	/* ap 34 */
-			 <0x00073000 0x00073000 0x001000>,	/* ap 35 */
-			 <0x00061000 0x00061000 0x001000>,	/* ap 36 */
-			 <0x00096000 0x00096000 0x001000>,	/* ap 37 */
-			 <0x00097000 0x00097000 0x001000>,	/* ap 38 */
-			 <0x00076000 0x00076000 0x001000>,	/* ap 39 */
-			 <0x00077000 0x00077000 0x001000>,	/* ap 40 */
-			 <0x00078000 0x00078000 0x001000>,	/* ap 41 */
-			 <0x00079000 0x00079000 0x001000>,	/* ap 42 */
-			 <0x00086000 0x00086000 0x001000>,	/* ap 43 */
-			 <0x00087000 0x00087000 0x001000>,	/* ap 44 */
-			 <0x00088000 0x00088000 0x001000>,	/* ap 45 */
-			 <0x00089000 0x00089000 0x001000>,	/* ap 46 */
-			 <0x000b0000 0x000b0000 0x001000>,	/* ap 47 */
-			 <0x000b1000 0x000b1000 0x001000>,	/* ap 48 */
-			 <0x00098000 0x00098000 0x001000>,	/* ap 49 */
-			 <0x00099000 0x00099000 0x001000>,	/* ap 50 */
-			 <0x0009a000 0x0009a000 0x001000>,	/* ap 51 */
-			 <0x0009b000 0x0009b000 0x001000>,	/* ap 52 */
-			 <0x0009c000 0x0009c000 0x001000>,	/* ap 53 */
-			 <0x0009d000 0x0009d000 0x001000>,	/* ap 54 */
-			 <0x0009e000 0x0009e000 0x001000>,	/* ap 55 */
-			 <0x0009f000 0x0009f000 0x001000>,	/* ap 56 */
-			 <0x00090000 0x00090000 0x002000>,	/* ap 57 */
-			 <0x00092000 0x00092000 0x001000>,	/* ap 58 */
-			 <0x000a4000 0x000a4000 0x001000>,	/* ap 59 */
-			 <0x000a6000 0x000a6000 0x001000>,	/* ap 60 */
-			 <0x000a8000 0x000a8000 0x004000>,	/* ap 61 */
-			 <0x000ac000 0x000ac000 0x001000>,	/* ap 62 */
-			 <0x000ad000 0x000ad000 0x001000>,	/* ap 63 */
-			 <0x000ae000 0x000ae000 0x001000>,	/* ap 64 */
-			 <0x000b2000 0x000b2000 0x001000>,	/* ap 65 */
-			 <0x000b3000 0x000b3000 0x001000>,	/* ap 66 */
-			 <0x000b4000 0x000b4000 0x001000>,	/* ap 67 */
-			 <0x000b5000 0x000b5000 0x001000>,	/* ap 68 */
-			 <0x000b8000 0x000b8000 0x001000>,	/* ap 69 */
-			 <0x000b9000 0x000b9000 0x001000>,	/* ap 70 */
-			 <0x000ba000 0x000ba000 0x001000>,	/* ap 71 */
-			 <0x000bb000 0x000bb000 0x001000>,	/* ap 72 */
-			 <0x000d1000 0x000d1000 0x001000>,	/* ap 73 */
-			 <0x000d2000 0x000d2000 0x001000>,	/* ap 74 */
-			 <0x000d5000 0x000d5000 0x001000>,	/* ap 75 */
-			 <0x000d6000 0x000d6000 0x001000>,	/* ap 76 */
-			 <0x000a2000 0x000a2000 0x001000>,	/* ap 79 */
-			 <0x000a3000 0x000a3000 0x001000>,	/* ap 80 */
-			 <0x00001400 0x00001400 0x000400>,	/* ap 81 */
-			 <0x00001800 0x00001800 0x000400>,	/* ap 82 */
-			 <0x00001c00 0x00001c00 0x000400>,	/* ap 83 */
-			 <0x000a5000 0x000a5000 0x001000>;	/* ap 84 */
-
-		target-module@20000 {			/* 0x48020000, ap 3 06.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x20050 0x4>,
-			      <0x20054 0x4>,
-			      <0x20058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_UART3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x20000 0x1000>;
-
-			uart3: serial@0 {
-				compatible = "ti,omap4-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-			};
-		};
-
-		target-module@32000 {			/* 0x48032000, ap 5 02.0 */
-			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			reg = <0x32000 0x4>,
-			      <0x32010 0x4>,
-			      <0x32014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x32000 0x1000>;
-
-			timer2: timer@0 {
-				compatible = "ti,omap3430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>,
-					 <&sys_clkin_ck>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@34000 {			/* 0x48034000, ap 7 04.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x34000 0x4>,
-			      <0x34010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x34000 0x1000>;
-
-			timer3: timer@0 {
-				compatible = "ti,omap4430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>,
-					 <&sys_clkin_ck>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@36000 {			/* 0x48036000, ap 9 0e.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x36000 0x4>,
-			      <0x36010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x36000 0x1000>;
-
-			timer4: timer@0 {
-				compatible = "ti,omap4430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>,
-					 <&sys_clkin_ck>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@3e000 {			/* 0x4803e000, ap 11 08.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x3e000 0x4>,
-			      <0x3e010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3e000 0x1000>;
-
-			timer9: timer@0 {
-				compatible = "ti,omap4430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>,
-					 <&sys_clkin_ck>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-			};
-		};
-
-		/* Unused DSS L4 access, see L3 instead */
-		target-module@40000 {			/* 0x48040000, ap 13 0a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x40000 0x10000>;
-		};
-
-		target-module@55000 {			/* 0x48055000, ap 15 0c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x55000 0x4>,
-			      <0x55010 0x4>,
-			      <0x55114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 0>,
-				 <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x55000 0x1000>;
-
-			gpio2: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@57000 {			/* 0x48057000, ap 17 16.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x57000 0x4>,
-			      <0x57010 0x4>,
-			      <0x57114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 0>,
-				 <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x57000 0x1000>;
-
-			gpio3: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@59000 {			/* 0x48059000, ap 19 10.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x59000 0x4>,
-			      <0x59010 0x4>,
-			      <0x59114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 0>,
-				 <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x59000 0x1000>;
-
-			gpio4: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@5b000 {			/* 0x4805b000, ap 21 12.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x5b000 0x4>,
-			      <0x5b010 0x4>,
-			      <0x5b114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 0>,
-				 <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5b000 0x1000>;
-
-			gpio5: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@5d000 {			/* 0x4805d000, ap 23 14.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x5d000 0x4>,
-			      <0x5d010 0x4>,
-			      <0x5d114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 0>,
-				 <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5d000 0x1000>;
-
-			gpio6: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@60000 {			/* 0x48060000, ap 25 1e.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x60000 0x8>,
-			      <0x60010 0x8>,
-			      <0x60090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_I2C3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x60000 0x1000>;
-
-			i2c3: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		target-module@6a000 {			/* 0x4806a000, ap 26 18.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x6a050 0x4>,
-			      <0x6a054 0x4>,
-			      <0x6a058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_UART1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6a000 0x1000>;
-
-			uart1: serial@0 {
-				compatible = "ti,omap4-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-			};
-		};
-
-		target-module@6c000 {			/* 0x4806c000, ap 28 20.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x6c050 0x4>,
-			      <0x6c054 0x4>,
-			      <0x6c058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_UART2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6c000 0x1000>;
-
-			uart2: serial@0 {
-				compatible = "ti,omap4-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-			};
-		};
-
-		target-module@6e000 {			/* 0x4806e000, ap 30 1c.1 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x6e050 0x4>,
-			      <0x6e054 0x4>,
-			      <0x6e058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_UART4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6e000 0x1000>;
-
-			uart4: serial@0 {
-				compatible = "ti,omap4-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-			};
-		};
-
-		target-module@70000 {			/* 0x48070000, ap 32 28.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x70000 0x8>,
-			      <0x70010 0x8>,
-			      <0x70090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_I2C1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x70000 0x1000>;
-
-			i2c1: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		target-module@72000 {			/* 0x48072000, ap 34 30.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x72000 0x8>,
-			      <0x72010 0x8>,
-			      <0x72090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_I2C2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x72000 0x1000>;
-
-			i2c2: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		target-module@76000 {			/* 0x48076000, ap 39 38.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x76000 0x4>,
-			      <0x76010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x76000 0x1000>;
-
-			/* No child device binding or driver in mainline */
-		};
-
-		target-module@78000 {			/* 0x48078000, ap 41 1a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x78000 0x4>,
-			      <0x78010 0x4>,
-			      <0x78014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_ELM_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x78000 0x1000>;
-
-			elm: elm@0 {
-				compatible = "ti,am3352-elm";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		target-module@86000 {			/* 0x48086000, ap 43 24.0 */
-			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			reg = <0x86000 0x4>,
-			      <0x86010 0x4>,
-			      <0x86014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x86000 0x1000>;
-
-			timer10: timer@0 {
-				compatible = "ti,omap3430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>,
-					 <&sys_clkin_ck>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-			};
-		};
-
-		target-module@88000 {			/* 0x48088000, ap 45 2e.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x88000 0x4>,
-			      <0x88010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x88000 0x1000>;
-
-			timer11: timer@0 {
-				compatible = "ti,omap4430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>,
-					 <&sys_clkin_ck>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-			};
-		};
-
-		rng_target: target-module@90000 {	/* 0x48090000, ap 57 2a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x91fe0 0x4>,
-			      <0x91fe4 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
-			clocks = <&l4_secure_clkctrl OMAP4_RNG_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x90000 0x2000>;
-
-			rng: rng@0 {
-				compatible = "ti,omap4-rng";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@96000 {			/* 0x48096000, ap 37 26.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x9608c 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x96000 0x1000>;
-
-			mcbsp4: mcbsp@0 {
-				compatible = "ti,omap4-mcbsp";
-				reg = <0x0 0xff>; /* L4 Interconnect */
-				reg-names = "mpu";
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "common";
-				ti,buffer-size = <128>;
-				dmas = <&sdma 31>,
-				       <&sdma 32>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-		};
-
-		target-module@98000 {			/* 0x48098000, ap 49 22.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x98000 0x4>,
-			      <0x98010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_MCSPI1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x98000 0x1000>;
-
-			mcspi1: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,spi-num-cs = <4>;
-				dmas = <&sdma 35>,
-				       <&sdma 36>,
-				       <&sdma 37>,
-				       <&sdma 38>,
-				       <&sdma 39>,
-				       <&sdma 40>,
-				       <&sdma 41>,
-				       <&sdma 42>;
-				dma-names = "tx0", "rx0", "tx1", "rx1",
-					    "tx2", "rx2", "tx3", "rx3";
-			};
-		};
-
-		target-module@9a000 {			/* 0x4809a000, ap 51 2c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x9a000 0x4>,
-			      <0x9a010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_MCSPI2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x9a000 0x1000>;
-
-			mcspi2: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,spi-num-cs = <2>;
-				dmas = <&sdma 43>,
-				       <&sdma 44>,
-				       <&sdma 45>,
-				       <&sdma 46>;
-				dma-names = "tx0", "rx0", "tx1", "rx1";
-			};
-		};
-
-		target-module@9c000 {			/* 0x4809c000, ap 53 36.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x9c000 0x4>,
-			      <0x9c010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
-			clocks = <&l3_init_clkctrl OMAP4_MMC1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x9c000 0x1000>;
-
-			mmc1: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				ti,dual-volt;
-				ti,needs-special-reset;
-				dmas = <&sdma 61>, <&sdma 62>;
-				dma-names = "tx", "rx";
-				pbias-supply = <&pbias_mmc_reg>;
-			};
-		};
-
-		target-module@9e000 {			/* 0x4809e000, ap 55 48.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x9e000 0x1000>;
-		};
-
-		target-module@a2000 {			/* 0x480a2000, ap 79 3a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa2000 0x1000>;
-		};
-
-		target-module@a4000 {			/* 0x480a4000, ap 59 34.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x000a4000 0x00001000>,
-				 <0x00001000 0x000a5000 0x00001000>;
-		};
-
-		des_target: target-module@a5000 {	/* 0x480a5000 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xa5030 0x4>,
-			      <0xa5034 0x4>,
-			      <0xa5038 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
-			clocks = <&l4_secure_clkctrl OMAP4_DES3DES_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0xa5000 0x00001000>;
-
-			des: des@0 {
-				compatible = "ti,omap4-des";
-				reg = <0 0xa0>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 117>, <&sdma 116>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@a8000 {			/* 0x480a8000, ap 61 3e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa8000 0x4000>;
-		};
-
-		target-module@ad000 {			/* 0x480ad000, ap 63 50.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xad000 0x4>,
-			      <0xad010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_MMC3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xad000 0x1000>;
-
-			mmc3: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-				ti,needs-special-reset;
-				dmas = <&sdma 77>, <&sdma 78>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@b0000 {			/* 0x480b0000, ap 47 40.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb0000 0x1000>;
-		};
-
-		target-module@b2000 {			/* 0x480b2000, ap 65 3c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xb2000 0x4>,
-			      <0xb2014 0x4>,
-			      <0xb2018 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,syss-mask = <1>;
-			ti,no-reset-on-init;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_HDQ1W_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb2000 0x1000>;
-
-			hdqw1w: 1w@0 {
-				compatible = "ti,omap3-1w";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@b4000 {			/* 0x480b4000, ap 67 46.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xb4000 0x4>,
-			      <0xb4010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
-			clocks = <&l3_init_clkctrl OMAP4_MMC2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb4000 0x1000>;
-
-			mmc2: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				ti,needs-special-reset;
-				dmas = <&sdma 47>, <&sdma 48>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@b8000 {			/* 0x480b8000, ap 69 58.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xb8000 0x4>,
-			      <0xb8010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_MCSPI3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb8000 0x1000>;
-
-			mcspi3: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,spi-num-cs = <2>;
-				dmas = <&sdma 15>, <&sdma 16>;
-				dma-names = "tx0", "rx0";
-			};
-		};
-
-		target-module@ba000 {			/* 0x480ba000, ap 71 32.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xba000 0x4>,
-			      <0xba010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_MCSPI4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xba000 0x1000>;
-
-			mcspi4: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,spi-num-cs = <1>;
-				dmas = <&sdma 70>, <&sdma 71>;
-				dma-names = "tx0", "rx0";
-			};
-		};
-
-		target-module@d1000 {			/* 0x480d1000, ap 73 44.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xd1000 0x4>,
-			      <0xd1010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_MMC4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xd1000 0x1000>;
-
-			mmc4: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				ti,needs-special-reset;
-				dmas = <&sdma 57>, <&sdma 58>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@d5000 {			/* 0x480d5000, ap 75 4e.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xd5000 0x4>,
-			      <0xd5010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_MMC5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xd5000 0x1000>;
-
-			mmc5: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-				ti,needs-special-reset;
-				dmas = <&sdma 59>, <&sdma 60>;
-				dma-names = "tx", "rx";
-			};
-		};
-	};
-
-	segment@200000 {					/* 0x48200000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00150000 0x00350000 0x001000>,	/* ap 77 */
-			 <0x00151000 0x00351000 0x001000>;	/* ap 78 */
-
-		target-module@150000 {			/* 0x48350000, ap 77 4c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x150000 0x8>,
-			      <0x150010 0x8>,
-			      <0x150090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
-			clocks = <&l4_per_clkctrl OMAP4_I2C4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x150000 0x1000>;
-
-			i2c4: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap4-mcpdm.dtsi b/arch/arm/boot/dts/omap4-mcpdm.dtsi
deleted file mode 100644
index 915a9b31a33b4..0000000000000
--- a/arch/arm/boot/dts/omap4-mcpdm.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common omap4 mcpdm configuration
- *
- * Only include this file if your board has pdmclk wired from the
- * pmic to ABE as mcpdm uses an external clock for the module.
- */
-
-&omap4_pmx_core {
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-		/* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */
-		OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)
-
-		/* 0x4a100108 abe_pdm_dl_data.abe_pdm_dl_data af25 */
-		OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)
-
-		/* 0x4a10010a abe_pdm_frame.abe_pdm_frame ae25 */
-		OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)
-
-		/* 0x4a10010c abe_pdm_lb_clk.abe_pdm_lb_clk af26 */
-		OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)
-
-		/* 0x4a10010e abe_clks.abe_clks ah26 */
-		OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)
-		>;
-	};
-};
-
-&mcpdm_module {
-	/*
-	 * McPDM pads must be muxed at the interconnect target module
-	 * level as the module on the SoC needs external clock from
-	 * the PMIC
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&mcpdm {
-	clocks = <&twl6040>;
-	clock-names = "pdmclk";
-};
diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts
deleted file mode 100644
index 8fd076e5d1b01..0000000000000
--- a/arch/arm/boot/dts/omap4-panda-a4.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-#include "omap4-panda-common.dtsi"
-
-/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
-&dss_hdmi_pins {
-	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
-		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
-		>;
-};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
deleted file mode 100644
index 0269424350aae..0000000000000
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ /dev/null
@@ -1,607 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-#include <dt-bindings/input/input.h>
-#include "elpida_ecb240abacn.dtsi"
-#include "omap4-mcpdm.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dsp_memory_region: dsp-memory@98000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x98000000 0x800000>;
-			reusable;
-			status = "okay";
-		};
-
-		ipu_memory_region: ipu-memory@98800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x98800000 0x7000000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	aliases {
-		display0 = &dvi0;
-		display1 = &hdmi0;
-		ethernet = &ethernet;
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <
-			&led_wkgpio_pins
-		>;
-
-		led-heartbeat {
-			label = "pandaboard::status1";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-mmc {
-			label = "pandaboard::status2";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	gpio_keys: gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <
-			&button_pins
-		>;
-
-		buttonS2 {
-			label = "button S2";
-			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
-			linux,code = <BTN_0>;
-			wakeup-source;
-		};
-	};
-
-	sound: sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "PandaBoard";
-
-		ti,mclk-freq = <38400000>;
-
-		ti,mcpdm = <&mcpdm>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"Ext Spk", "HFL",
-			"Ext Spk", "HFR",
-			"Line Out", "AUXL",
-			"Line Out", "AUXR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias",
-			"AFML", "Line In",
-			"AFMR", "Line In";
-	};
-
-	/* HS USB Port 1 Power */
-	hsusb1_power: hsusb1_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb1_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;	/* gpio_1 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		/*
-		 * boot-on is required along with always-on as the
-		 * regulator framework doesn't enable the regulator
-		 * if boot-on is not there.
-		 */
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
-		#phy-cells = <0>;
-		vcc-supply = <&hsusb1_power>;
-		clocks = <&auxclk3_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	/* regulator for wl12xx on sdio5 */
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	tfp410: encoder0 {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder1 {
-		compatible = "ti,tpd12s015";
-
-		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
-			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
-			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector1 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&dss_dpi_pins
-			&tfp410_pins
-			&dss_hdmi_pins
-			&tpd12s015_pins
-			&hsusbb1_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
-			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
-			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
-			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
-			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
-			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
-			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
-			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
-			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
-			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
-			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
-			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
-
-			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
-			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
-			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
-			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
-			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
-			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
-			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
-			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
-			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
-			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
-			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
-			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
-			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
-			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
-
-			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
-			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
-			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
-		>;
-	};
-
-	tfp410_pins: pinmux_tfp410_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
-			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
-		>;
-	};
-
-	hsusbb1_pins: pinmux_hsusbb1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
-			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
-			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
-			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
-			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
-			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
-			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
-			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
-			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
-			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
-			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
-			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	/*
-	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
-	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
-	 */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
-			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
-		>;
-	};
-
-	/* wl12xx GPIO inputs and SDIO pins */
-	wl12xx_pins: pinmux_wl12xx_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
-			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpio_121 */
-		>;
-	};
-};
-
-&omap4_pmx_wkup {
-	led_wkgpio_pins: pinmux_leds_wkpins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
-			OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* IRQ# = 7 */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		#clock-cells = <0>;
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		/* IRQ# = 119 */
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <100000>;
-
-	/*
-	 * Display monitor features are burnt in their EEPROM as EDID data.
-	 * The EEPROM is connected as I2C slave device.
-	 */
-	eeprom@50 {
-		compatible = "ti,eeprom";
-		reg = <0x50>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&wl12xx_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core 0x10e>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		/* gpio_53 with gpmc_ncs3 pad as wakeup */
-		interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
-				      <&omap4_pmx_core 0x3a>;
-		interrupt-names = "irq", "wakeup";
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&emif1 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&emif2 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&uart2 {
-	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART2_RX>;
-};
-
-&uart3 {
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART3_RX>;
-};
-
-&uart4 {
-	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART4_RX>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hub@1 {
-		compatible = "usb424,9514";
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethernet: ethernet@1 {
-			compatible = "usb424,ec00";
-			reg = <1>;
-		};
-	};
-};
-
-&dss {
-	status = "okay";
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&dsi2 {
-	status = "okay";
-	vdd-supply = <&vcxio>;
-};
-
-&hdmi {
-	status = "okay";
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
-
-&dsp {
-	status = "okay";
-	memory-region = <&dsp_memory_region>;
-	ti,timers = <&timer5>;
-	ti,watchdog-timers = <&timer6>;
-};
-
-&ipu {
-	status = "okay";
-	memory-region = <&ipu_memory_region>;
-	ti,timers = <&timer3>;
-	ti,watchdog-timers = <&timer9>, <&timer11>;
-};
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
deleted file mode 100644
index 7631029e4d7a8..0000000000000
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap4460.dtsi"
-#include "omap4-panda-common.dtsi"
-
-/ {
-	model = "TI OMAP4 PandaBoard-ES";
-	compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4";
-};
-
-/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
-&sound {
-	ti,model = "PandaBoardES";
-
-	/* Audio routing */
-	ti,audio-routing =
-		"Headset Stereophone", "HSOL",
-		"Headset Stereophone", "HSOR",
-		"Ext Spk", "HFL",
-		"Ext Spk", "HFR",
-		"Line Out", "AUXL",
-		"Line Out", "AUXR",
-		"AFML", "Line In",
-		"AFMR", "Line In";
-};
-
-/* PandaboardES has external pullups on SCL & SDA */
-&dss_hdmi_pins {
-	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
-		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
-		>;
-};
-
-&omap4_pmx_core {
-	led_gpio_pins: gpio_led_pmx {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
-		>;
-	};
-
-	bt_pins: pinmux_bt_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 - BTEN */
-			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 - BTWAKEUP */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts - HCI */
-			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-};
-
-&led_wkgpio_pins {
-	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
-	>;
-};
-
-&leds {
-	pinctrl-0 = <
-		&led_gpio_pins
-		&led_wkgpio_pins
-	>;
-
-	led-heartbeat {
-		gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
-	};
-	led-mmc {
-		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&gpio_keys {
-	buttonS2 {
-		gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */
-	};
-};
-
-&gpio1_target {
-	 ti,no-reset-on-init;
-};
-
-&wl12xx_gpio {
-	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-		OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-	>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins &bt_pins>;
-	bluetooth: tiwi {
-		compatible = "ti,wl1271-st";
-		enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;	/* GPIO_46 */
-	};
-};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
deleted file mode 100644
index 529d5bcceaaf6..0000000000000
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-#include "omap4-panda-common.dtsi"
-
-/ {
-	model = "TI OMAP4 PandaBoard";
-	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
-};
diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
deleted file mode 100644
index 869f6279b5bea..0000000000000
--- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-#include "omap4-sdp.dts"
-
-/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
-&dss_hdmi_pins {
-	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
-		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
-		>;
-};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
deleted file mode 100644
index 9e976140f34a6..0000000000000
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ /dev/null
@@ -1,717 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-#include "elpida_ecb240abacn.dtsi"
-#include "omap4-mcpdm.dtsi"
-
-/ {
-	model = "TI OMAP4 SDP board";
-	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &lcd1;
-		display2 = &hdmi0;
-	};
-
-	vdd_eth: fixedregulator-vdd-eth {
-		pinctrl-names = "default";
-		pinctrl-0 = <&enet_enable_gpio>;
-
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_ETH";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;  /* gpio line 48 */
-		enable-active-high;
-		regulator-boot-on;
-		startup-delay-us = <25000>;
-	};
-
-	vbat: fixedregulator-vbat {
-		compatible = "regulator-fixed";
-		regulator-name = "VBAT";
-		regulator-min-microvolt = <3750000>;
-		regulator-max-microvolt = <3750000>;
-		regulator-boot-on;
-	};
-
-	led-controller-1 {
-		compatible = "gpio-leds";
-
-		led-1 {
-			label = "omap4:green:debug0";
-			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
-		};
-
-		led-2 {
-			label = "omap4:green:debug1";
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
-		};
-
-		led-3 {
-			label = "omap4:green:debug2";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
-		};
-
-		led-4 {
-			label = "omap4:green:debug3";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
-		};
-
-		led-5 {
-			label = "omap4:green:debug4";
-			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
-		};
-
-		led-6 {
-			label = "omap4:blue:user";
-			gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
-		};
-
-		led-7 {
-			label = "omap4:red:user";
-			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
-		};
-
-		led-8 {
-			label = "omap4:green:user";
-			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
-		};
-	};
-
-	led-controller-2 {
-		compatible = "pwm-leds";
-
-		led-9 {
-			label = "omap4::keypad";
-			pwms = <&twl_pwm 0 7812500>;
-			max-brightness = <127>;
-		};
-
-		led-10 {
-			label = "omap4:green:chrg";
-			pwms = <&twl_pwmled 0 7812500>;
-			max-brightness = <255>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&twl_pwm 1 7812500>;
-		brightness-levels = <
-				0 10 20 30 40
-				50 60 70 80 90
-				100 110 120 127
-				>;
-		default-brightness-level = <13>;
-	};
-
-	sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "SDP4430";
-
-		ti,jack-detection = <1>;
-		ti,mclk-freq = <38400000>;
-
-		ti,mcpdm = <&mcpdm>;
-		ti,dmic = <&dmic>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"Earphone Spk", "EP",
-			"Ext Spk", "HFL",
-			"Ext Spk", "HFR",
-			"Line Out", "AUXL",
-			"Line Out", "AUXR",
-			"Vibrator", "VIBRAL",
-			"Vibrator", "VIBRAR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias",
-			"MAINMIC", "Main Handset Mic",
-			"Main Handset Mic", "Main Mic Bias",
-			"SUBMIC", "Sub Handset Mic",
-			"Sub Handset Mic", "Main Mic Bias",
-			"AFML", "Line In",
-			"AFMR", "Line In",
-			"DMic", "Digital Mic",
-			"Digital Mic", "Digital Mic1 Bias";
-	};
-
-	/* regulator for wl12xx on sdio5 */
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	tpd12s015: encoder {
-		compatible = "ti,tpd12s015";
-
-		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
-			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
-			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "c";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&dss_hdmi_pins
-			&tpd12s015_pins
-	>;
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	uart4_pins: pinmux_uart4_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
-			OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
-		>;
-	};
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
-			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	dmic_pins: pinmux_dmic_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
-			OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
-			OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
-			OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
-			OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
-			OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
-			OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
-			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
-			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
-			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
-			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	/* wl12xx GPIO output for WLAN_EN */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
-		>;
-	};
-
-	/* wl12xx GPIO inputs and SDIO pins */
-	wl12xx_pins: pinmux_wl12xx_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
-		>;
-	};
-
-	/* gpio_48 for ENET_ENABLE */
-	enet_enable_gpio: pinmux_enet_enable_gpio {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-		>;
-	};
-
-	ks8851_pins: pinmux_ks8851_pins {
-		pinctrl-single,pins = <
-			/* ENET_INT */
-			OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ad10.gpio_34 */
-			/*
-			 * Misterious pin which makes the ethernet working
-			 * The legacy board file requested this pin on boot
-			 * (ETH_KS8851_QUART) and set it to high, similarly to
-			 * the ENET_ENABLE pin.
-			 * We could use gpio-hog to keep it high, but let's use
-			 * it as a reset GPIO for ks8851.
-			 */
-			OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.gpio_138 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		#clock-cells = <0>;
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-
-		/* regulators for vibra motor */
-		vddvibl-supply = <&vbat>;
-		vddvibr-supply = <&vbat>;
-
-		vibra {
-			/* Vibra driver, motor resistance parameters */
-			ti,vibldrv-res = <8>;
-			ti,vibrdrv-res = <3>;
-			ti,viblmotor-res = <10>;
-			ti,vibrmotor-res = <10>;
-		};
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <400000>;
-
-	/*
-	 * Temperature Sensor
-	 * https://www.ti.com/lit/ds/symlink/tmp105.pdf
-	 */
-	tmp105@48 {
-		compatible = "ti,tmp105";
-		reg = <0x48>;
-	};
-
-	/*
-	 * Ambient Light Sensor
-	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
-	 */
-	bh1780@29 {
-		compatible = "rohm,bh1780";
-		reg = <0x29>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-
-	/*
-	 * 3-Axis Digital Compass
-	 * https://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
-	 */
-	hmc5843@1e {
-		compatible = "honeywell,hmc5843";
-		reg = <0x1e>;
-	};
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-
-	eth@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ks8851_pins>;
-
-		compatible = "ks8851";
-		spi-max-frequency = <24000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
-		vdd-supply = <&vdd_eth>;
-		reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vaux1>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&wl12xx_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1281";
-		reg = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
-		ref-clock-frequency = <26000000>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
-
-&emif1 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&emif2 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&keypad {
-	keypad,num-rows = <8>;
-	keypad,num-columns = <8>;
-	linux,keymap = <0x00000012	/* KEY_E */
-			0x00010013	/* KEY_R */
-			0x00020014	/* KEY_T */
-			0x00030066	/* KEY_HOME */
-			0x0004003f	/* KEY_F5 */
-			0x000500f0	/* KEY_UNKNOWN */
-			0x00060017	/* KEY_I */
-			0x0007002a	/* KEY_LEFTSHIFT */
-			0x01000020	/* KEY_D*/
-			0x01010021	/* KEY_F */
-			0x01020022	/* KEY_G */
-			0x010300e7	/* KEY_SEND */
-			0x01040040	/* KEY_F6 */
-			0x010500f0	/* KEY_UNKNOWN */
-			0x01060025	/* KEY_K */
-			0x0107001c	/* KEY_ENTER */
-			0x0200002d	/* KEY_X */
-			0x0201002e	/* KEY_C */
-			0x0202002f	/* KEY_V */
-			0x0203006b	/* KEY_END */
-			0x02040041	/* KEY_F7 */
-			0x020500f0	/* KEY_UNKNOWN */
-			0x02060034	/* KEY_DOT */
-			0x0207003a	/* KEY_CAPSLOCK */
-			0x0300002c	/* KEY_Z */
-			0x0301004e	/* KEY_KPLUS */
-			0x03020030	/* KEY_B */
-			0x0303003b	/* KEY_F1 */
-			0x03040042	/* KEY_F8 */
-			0x030500f0	/* KEY_UNKNOWN */
-			0x03060018	/* KEY_O */
-			0x03070039	/* KEY_SPACE */
-			0x04000011	/* KEY_W */
-			0x04010015	/* KEY_Y */
-			0x04020016	/* KEY_U */
-			0x0403003c	/* KEY_F2 */
-			0x04040073	/* KEY_VOLUMEUP */
-			0x040500f0	/* KEY_UNKNOWN */
-			0x04060026	/* KEY_L */
-			0x04070069	/* KEY_LEFT */
-			0x0500001f	/* KEY_S */
-			0x05010023	/* KEY_H */
-			0x05020024	/* KEY_J */
-			0x0503003d	/* KEY_F3 */
-			0x05040043	/* KEY_F9 */
-			0x05050072	/* KEY_VOLUMEDOWN */
-			0x05060032	/* KEY_M */
-			0x0507006a	/* KEY_RIGHT */
-			0x06000010	/* KEY_Q */
-			0x0601001e	/* KEY_A */
-			0x06020031	/* KEY_N */
-			0x0603009e	/* KEY_BACK */
-			0x0604000e	/* KEY_BACKSPACE */
-			0x060500f0	/* KEY_UNKNOWN */
-			0x06060019	/* KEY_P */
-			0x06070067	/* KEY_UP */
-			0x07000094	/* KEY_PROG1 */
-			0x07010095	/* KEY_PROG2 */
-			0x070200ca	/* KEY_PROG3 */
-			0x070300cb	/* KEY_PROG4 */
-			0x0704003e	/* KEY_F4 */
-			0x070500f0	/* KEY_UNKNOWN */
-			0x07060160	/* KEY_OK */
-			0x0707006c>;	/* KEY_DOWN */
-	linux,input-no-autorepeat;
-};
-
-&uart2 {
-	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART2_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&uart4 {
-	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART4_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&dmic {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dmic_pins>;
-	status = "okay";
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&dss {
-	status = "okay";
-};
-
-&dsi1 {
-	status = "okay";
-	vdd-supply = <&vcxio>;
-
-	port {
-		dsi1_out_ep: endpoint {
-			remote-endpoint = <&lcd0_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd0: panel@0 {
-		compatible = "tpo,taal", "panel-dsi-cm";
-		reg = <0>;
-		label = "lcd0";
-
-		reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;	/* 102 */
-
-		port {
-			lcd0_in: endpoint {
-				remote-endpoint = <&dsi1_out_ep>;
-			};
-		};
-	};
-};
-
-&dsi2 {
-	status = "okay";
-	vdd-supply = <&vcxio>;
-
-	port {
-		dsi2_out_ep: endpoint {
-			remote-endpoint = <&lcd1_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd1: panel@0 {
-		compatible = "tpo,taal", "panel-dsi-cm";
-		reg = <0>;
-		label = "lcd1";
-
-		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;	/* 104 */
-
-		port {
-			lcd1_in: endpoint {
-				remote-endpoint = <&dsi2_out_ep>;
-			};
-		};
-	};
-};
-
-&hdmi {
-	status = "okay";
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap4-var-dvk-om44.dts b/arch/arm/boot/dts/omap4-var-dvk-om44.dts
deleted file mode 100644
index 84fd17fb08220..0000000000000
--- a/arch/arm/boot/dts/omap4-var-dvk-om44.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- */
-/dts-v1/;
-
-#include "omap4-var-som-om44.dtsi"
-#include "omap4-var-som-om44-wlan.dtsi"
-#include "omap4-var-om44customboard.dtsi"
-
-/ {
-	model = "Variscite VAR-DVK-OM44";
-	compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &hdmi0;
-	};
-
-	lcd0: display {
-		compatible = "innolux,at070tn83", "panel-dpi";
-		label = "lcd";
-		panel-timing {
-			clock-frequency = <33333333>;
-
-			hback-porch = <40>;
-			hactive = <800>;
-			hfront-porch = <40>;
-			hsync-len = <48>;
-
-			vback-porch = <29>;
-			vactive = <480>;
-			vfront-porch = <13>;
-			vsync-len = <3>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-
-		gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio 122 */
-	};
-};
-
-&dss {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&dsi2 {
-	status = "okay";
-	vdd-supply = <&vcxio>;
-};
diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
deleted file mode 100644
index 458cb53dd3d18..0000000000000
--- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- */
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_led_pins>;
-
-		led0 {
-			label = "var:green:led0";
-			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio 173 */
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1 {
-			label = "var:green:led1";
-			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; /* gpio 172 */
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_key_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		user-key@184 {
-			label = "user";
-			gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */
-			linux,code = <BTN_EXTRA>;
-			wakeup-source;
-		};
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd_pins>;
-		label = "hdmi";
-		type = "a";
-
-		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi1_cs2.uart1_cts */
-			OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1)		/* mcspi1_cs3.uart1_rts */
-			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1)	/* i2c2_scl.uart1_rx */
-			OMAP4_IOPAD(0x128, PIN_OUTPUT | MUX_MODE1)		/* i2c2_sda.uart1_tx */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
-			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
-			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
-			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	mcasp_pins: pinmux_mcsasp_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2)		/*  mcbsp2_dr.abe_mcasp_axr */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data23 */
-			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data22 */
-			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data21 */
-			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data20 */
-			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data19 */
-			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data18 */
-			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data15 */
-			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data14 */
-			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data13 */
-			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data12 */
-			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data11 */
-			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data10 */
-			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data9 */
-			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data16 */
-			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data17 */
-			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_hsync */
-			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)		/* dispc2_pclk */
-			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_vsync */
-			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_de */
-			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data8 */
-			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data7 */
-			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data6 */
-			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data5 */
-			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data4 */
-			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data3 */
-			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data2 */
-			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data1 */
-			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data0 */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
-			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	mmc5_pins: pinmux_mmc5_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3)		/* abe_mcbsp2_clkx.gpio_110 */
-			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
-		>;
-	};
-
-	gpio_led_pins: pinmux_gpio_led_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3)		/* kpd_col4.gpio_172 */
-			OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)		/* kpd_col5.gpio_173 */
-		>;
-	};
-
-	gpio_key_pins: pinmux_gpio_key_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3)		/* sys_boot0.gpio_184 */
-		>;
-	};
-
-	ks8851_irq_pins: pinmux_ks8851_irq_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3)	/* kpd_col3.gpio_171 */
-		>;
-	};
-
-	hdmi_hpd_pins: pinmux_hdmi_hpd_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
-		>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-	status = "okay";
-
-	eth@0 {
-		compatible = "ks8851";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ks8851_irq_pins>;
-		spi-max-frequency = <24000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio 171 */
-	};
-};
-
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc5_pins>;
-	vmmc-supply = <&vbat>;
-	bus-width = <4>;
-	cd-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio 110 */
-	status = "okay";
-};
-
-&dss {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_hdmi_pins>;
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&hdmi_connector_in>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
deleted file mode 100644
index d0032213101e6..0000000000000
--- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- */
-
-/ {
-	/* regulator for wl12xx on sdio4 */
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_ctrl_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;	/* gpio 43 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&omap4_pmx_core {
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a17.gpio_41 (WLAN_IRQ) */
-			OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a18.gpio_42 (BT_EN) */
-			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 (WLAN_EN) */
-		>;
-	};
-
-	mmc4_pins: pinmux_mmc4_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_clk.sdmmc4_clk */
-			OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_simo.sdmmc4_cmd */
-			OMAP4_IOPAD(0x158, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_somi.sdmmc4_dat0 */
-			OMAP4_IOPAD(0x15e, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_tx.sdmmc4_dat1 */
-			OMAP4_IOPAD(0x15c, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_rx.sdmmc4_dat2 */
-			OMAP4_IOPAD(0x15a, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_cs0.sdmmc4_dat3 */
-		>;
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-&mmc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc4_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
-		ref-clock-frequency = <38400000>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
deleted file mode 100644
index 334cbbaa5b8b0..0000000000000
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ /dev/null
@@ -1,325 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- * Copyright (C) 2012 Variscite Ltd. - https://www.variscite.com
- */
-#include "omap4460.dtsi"
-#include "omap4-mcpdm.dtsi"
-
-/ {
-	model = "Variscite VAR-SOM-OM44";
-	compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	sound: sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "VAR-SOM-OM44";
-
-		ti,mclk-freq = <38400000>;
-		ti,mcpdm = <&mcpdm>;
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"AFML", "Line In",
-			"AFMR", "Line In";
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		pinctrl-names = "default";
-		pinctrl-0 = <
-			&hsusbb1_phy_clk_pins
-			&hsusbb1_phy_rst_pins
-		>;
-
-		reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */
-		vcc-supply = <&vbat>;
-		#phy-cells = <0>;
-
-		clocks = <&auxclk3_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	vbat: fixedregulator-vbat {
-		compatible = "regulator-fixed";
-		regulator-name = "VBAT";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusbb1_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3)		/* fref_clk2_out.gpio_182 */
-			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	tsc2004_pins: pinmux_tsc2004_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs4.gpio_101 (irq) */
-			OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3)		/* gpmc_ncs5.gpio_102 (rst) */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	hsusbb1_pins: pinmux_hsusbb1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
-			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
-			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
-			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
-			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
-			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
-			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
-			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
-			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
-			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
-			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
-			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
-		>;
-	};
-
-	hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3)		/* kpd_row2.gpio_177 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-};
-
-&omap4_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&hsusbb1_hub_rst_pins
-		&lan7500_rst_pins
-	>;
-
-	hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0)	/* fref_clk3_out */
-		>;
-	};
-
-	hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk1 */
-		>;
-	};
-
-	lan7500_rst_pins: pinmux_lan7500_rst_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk0 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		#clock-cells = <0>;
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio 182 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-&vusim {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-always-on;
-};
-
-&i2c2 {
-	status = "disabled";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	touchscreen: tsc2004@48 {
-		compatible = "ti,tsc2004";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsc2004_pins>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* gpio 101 */
-		status = "disabled";
-	};
-
-	tmp105@49 {
-		compatible = "ti,tmp105";
-		reg = <0x49>;
-	};
-
-	eeprom@50 {
-		compatible = "microchip,24c32", "atmel,24c32";
-		reg = <0x50>;
-	};
-};
-
-&i2c4 {
-	status = "disabled";
-};
-
-&gpmc {
-	status = "disabled";
-};
-
-&mcspi1 {
-	status = "disabled";
-};
-
-&mcspi2 {
-	status = "disabled";
-};
-
-&mcspi3 {
-	status = "disabled";
-};
-
-&mcspi4 {
-	status = "disabled";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc>;
-	bus-width = <4>;
-	ti,non-removable;
-	status = "okay";
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	status = "disabled";
-};
-
-&uart1 {
-	status = "disabled";
-};
-
-&uart2 {
-	status = "disabled";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	status = "okay";
-};
-
-&uart4 {
-	status = "disabled";
-};
-
-&keypad {
-	status = "disabled";
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
diff --git a/arch/arm/boot/dts/omap4-var-stk-om44.dts b/arch/arm/boot/dts/omap4-var-stk-om44.dts
deleted file mode 100644
index 656fb29c2a159..0000000000000
--- a/arch/arm/boot/dts/omap4-var-stk-om44.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- */
-/dts-v1/;
-
-#include "omap4-var-som-om44.dtsi"
-#include "omap4-var-som-om44-wlan.dtsi"
-#include "omap4-var-om44customboard.dtsi"
-
-/ {
-	model = "Variscite VAR-STK-OM44";
-	compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
-};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
deleted file mode 100644
index 2bbff9032be3e..0000000000000
--- a/arch/arm/boot/dts/omap4.dtsi
+++ /dev/null
@@ -1,868 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/clock/omap4.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/omap.h>
-#include <dt-bindings/clock/omap4.h>
-
-/ {
-	compatible = "ti,omap4430", "ti,omap4";
-	interrupt-parent = <&wakeupgen>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		mmc0 = &mmc1;
-		mmc1 = &mmc2;
-		mmc2 = &mmc3;
-		mmc3 = &mmc4;
-		mmc4 = &mmc5;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		rproc0 = &dsp;
-		rproc1 = &ipu;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&L2>;
-			reg = <0x1>;
-		};
-	};
-
-	/*
-	 * Needed early by omap4_sram_init() for barrier, do not move to l3
-	 * interconnect as simple-pm-bus probes at module_init() time.
-	 */
-	ocmcram: sram@40304000 {
-		compatible = "mmio-sram";
-		reg = <0x40304000 0xa000>; /* 40k */
-	};
-
-	gic: interrupt-controller@48241000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48241000 0x1000>,
-		      <0x48240100 0x0100>;
-		interrupt-parent = <&gic>;
-	};
-
-	L2: cache-controller@48242000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x48242000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	local-timer@48240600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		clocks = <&mpu_periphclk>;
-		reg = <0x48240600 0x20>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
-		interrupt-parent = <&gic>;
-	};
-
-	wakeupgen: interrupt-controller@48281000 {
-		compatible = "ti,omap4-wugen-mpu";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48281000 0x1000>;
-		interrupt-parent = <&gic>;
-	};
-
-	/*
-	 * XXX: Use a flat representation of the OMAP4 interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "simple-pm-bus";
-		power-domains = <&prm_l4per>;
-		clocks = <&l3_1_clkctrl OMAP4_L3_MAIN_1_CLKCTRL 0>,
-			 <&l3_2_clkctrl OMAP4_L3_MAIN_2_CLKCTRL 0>,
-			 <&l3_instr_clkctrl OMAP4_L3_MAIN_3_CLKCTRL 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		l3-noc@44000000 {
-			compatible = "ti,omap4-l3-noc";
-			reg = <0x44000000 0x1000>,
-			      <0x44800000 0x2000>,
-			      <0x45000000 0x1000>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		l4_wkup: interconnect@4a300000 {
-		};
-
-		l4_cfg: interconnect@4a000000 {
-		};
-
-		l4_per: interconnect@48000000 {
-		};
-
-		target-module@48210000 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			power-domains = <&prm_mpu>;
-			clocks = <&mpuss_clkctrl OMAP4_MPU_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48210000 0x1f0000>;
-
-			mpu {
-				compatible = "ti,omap4-mpu";
-				sram = <&ocmcram>;
-			};
-		};
-
-		l4_abe: interconnect@40100000 {
-		};
-
-		target-module@50000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x50000000 4>,
-			      <0x50000010 4>,
-			      <0x50000014 4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			ti,no-idle-on-init;
-			clocks = <&l3_2_clkctrl OMAP4_GPMC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
-				 <0x00000000 0x00000000 0x40000000>; /* data */
-
-			gpmc: gpmc@50000000 {
-				compatible = "ti,omap4430-gpmc";
-				reg = <0x50000000 0x1000>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 4>;
-				dma-names = "rxtx";
-				gpmc,num-cs = <8>;
-				gpmc,num-waitpins = <4>;
-				clocks = <&l3_div_ck>;
-				clock-names = "fck";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-
-		target-module@52000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x52000000 0x4>,
-			      <0x52000010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-delay-us = <2>;
-			power-domains = <&prm_cam>;
-			clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x52000000 0x1000000>;
-
-			/* No child device binding, driver in staging */
-		};
-
-		/*
-		 * Note that 4430 needs cross trigger interface (CTI) supported
-		 * before we can configure the interrupts. This means sampling
-		 * events are not supported for pmu. Note that 4460 does not use
-		 * CTI, see also 4460.dtsi.
-		 */
-		target-module@54000000 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			power-domains = <&prm_emu>;
-			clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x54000000 0x1000000>;
-
-			pmu: pmu {
-				compatible = "arm,cortex-a9-pmu";
-			};
-		};
-
-		target-module@55082000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x55082000 0x4>,
-			      <0x55082010 0x4>,
-			      <0x55082014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
-			clock-names = "fck";
-			resets = <&prm_core 2>;
-			reset-names = "rstctrl";
-			ranges = <0x0 0x55082000 0x100>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			mmu_ipu: mmu@0 {
-				compatible = "ti,omap4-iommu";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-				#iommu-cells = <0>;
-				ti,iommu-bus-err-back;
-			};
-		};
-
-		target-module@4012c000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x4012c000 0x4>,
-			      <0x4012c010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&abe_clkctrl OMAP4_SLIMBUS1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */
-				 <0x4902c000 0x4902c000 0x1000>; /* L3 */
-
-			/* No child device binding or driver in mainline */
-		};
-
-		target-module@4e000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4e000000 0x4>,
-			      <0x4e000010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ranges = <0x0 0x4e000000 0x2000000>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			dmm@0 {
-				compatible = "ti,omap4-dmm";
-				reg = <0 0x800>;
-				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@4c000000 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x4c000000 0x4>;
-			reg-names = "rev";
-			clocks = <&l3_emif_clkctrl OMAP4_EMIF1_CLKCTRL 0>;
-			clock-names = "fck";
-			ti,no-idle;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4c000000 0x1000000>;
-
-			emif1: emif@0 {
-				compatible = "ti,emif-4d";
-				reg = <0 0x100>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				phy-type = <1>;
-				hw-caps-read-idle-ctrl;
-				hw-caps-ll-interface;
-				hw-caps-temp-alert;
-			};
-		};
-
-		target-module@4d000000 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x4d000000 0x4>;
-			reg-names = "rev";
-			clocks = <&l3_emif_clkctrl OMAP4_EMIF2_CLKCTRL 0>;
-			clock-names = "fck";
-			ti,no-idle;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4d000000 0x1000000>;
-
-			emif2: emif@0 {
-				compatible = "ti,emif-4d";
-				reg = <0 0x100>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				phy-type = <1>;
-				hw-caps-read-idle-ctrl;
-				hw-caps-ll-interface;
-				hw-caps-temp-alert;
-			};
-		};
-
-		dsp: dsp {
-			compatible = "ti,omap4-dsp";
-			ti,bootreg = <&scm_conf 0x304 0>;
-			iommus = <&mmu_dsp>;
-			resets = <&prm_tesla 0>;
-			clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
-			firmware-name = "omap4-dsp-fw.xe64T";
-			mboxes = <&mailbox &mbox_dsp>;
-			status = "disabled";
-		};
-
-		ipu: ipu@55020000 {
-			compatible = "ti,omap4-ipu";
-			reg = <0x55020000 0x10000>;
-			reg-names = "l2ram";
-			iommus = <&mmu_ipu>;
-			resets = <&prm_core 0>, <&prm_core 1>;
-			clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
-			firmware-name = "omap4-ipu-fw.xem3";
-			mboxes = <&mailbox &mbox_ipu>;
-			status = "disabled";
-		};
-
-		aes1_target: target-module@4b501000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4b501080 0x4>,
-			      <0x4b501084 0x4>,
-			      <0x4b501088 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
-			clocks = <&l4_secure_clkctrl OMAP4_AES1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4b501000 0x1000>;
-
-			aes1: aes@0 {
-				compatible = "ti,omap4-aes";
-				reg = <0 0xa0>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 111>, <&sdma 110>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		aes2_target: target-module@4b701000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4b701080 0x4>,
-			      <0x4b701084 0x4>,
-			      <0x4b701088 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
-			clocks = <&l4_secure_clkctrl OMAP4_AES2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4b701000 0x1000>;
-
-			aes2: aes@0 {
-				compatible = "ti,omap4-aes";
-				reg = <0 0xa0>;
-				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 114>, <&sdma 113>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		sham_target: target-module@4b100000 {
-			compatible = "ti,sysc-omap3-sham", "ti,sysc";
-			reg = <0x4b100100 0x4>,
-			      <0x4b100110 0x4>,
-			      <0x4b100114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
-			clocks = <&l4_secure_clkctrl OMAP4_SHA2MD5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4b100000 0x1000>;
-
-			sham: sham@0 {
-				compatible = "ti,omap4-sham";
-				reg = <0 0x300>;
-				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 119>;
-				dma-names = "rx";
-			};
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			compatible = "ti,abb-v2";
-			regulator-name = "abb_mpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			ti,tranxdone-status-mask = <0x80>;
-			clocks = <&sys_clkin_ck>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			status = "disabled";
-		};
-
-		abb_iva: regulator-abb-iva {
-			compatible = "ti,abb-v2";
-			regulator-name = "abb_iva";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			ti,tranxdone-status-mask = <0x80000000>;
-			clocks = <&sys_clkin_ck>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			status = "disabled";
-		};
-
-		sgx_module: target-module@56000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x5600fe00 0x4>,
-			      <0x5600fe10 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			power-domains = <&prm_gfx>;
-			clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x56000000 0x2000000>;
-
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
-		};
-
-		/*
-		 * DSS is only using l3 mapping without l4 as noted in the TRM
-		 * "10.1.3 DSS Register Manual" for omap4460.
-		 */
-		target-module@58000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x58000000 4>,
-			      <0x58000014 4>;
-			reg-names = "rev", "syss";
-			ti,syss-mask = <1>;
-			power-domains = <&prm_dss>;
-			clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 0>,
-				 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
-				 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>,
-				 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
-			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x58000000 0x1000000>;
-
-			dss: dss@0 {
-				compatible = "ti,omap4-dss";
-				reg = <0 0x80>;
-				status = "disabled";
-				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x1000000>;
-
-				target-module@1000 {
-					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x1000 0x4>,
-					      <0x1010 0x4>,
-					      <0x1014 0x4>;
-					reg-names = "rev", "sysc", "syss";
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-midle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-							 SYSC_OMAP2_ENAWAKEUP |
-							 SYSC_OMAP2_SOFTRESET |
-							 SYSC_OMAP2_AUTOIDLE)>;
-					ti,syss-mask = <1>;
-					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
-						 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
-					clock-names = "fck", "sys_clk";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x1000 0x1000>;
-
-					dispc@0 {
-						compatible = "ti,omap4-dispc";
-						reg = <0 0x1000>;
-						interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
-						clock-names = "fck";
-					};
-				};
-
-				target-module@2000 {
-					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x2000 0x4>,
-					      <0x2010 0x4>,
-					      <0x2014 0x4>;
-					reg-names = "rev", "sysc", "syss";
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-							 SYSC_OMAP2_AUTOIDLE)>;
-					ti,syss-mask = <1>;
-					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
-						 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
-					clock-names = "fck", "sys_clk";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x2000 0x1000>;
-
-					rfbi: encoder@0  {
-						reg = <0 0x1000>;
-						status = "disabled";
-						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>;
-						clock-names = "fck", "ick";
-					};
-				};
-
-				target-module@3000 {
-					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x3000 0x4>;
-					reg-names = "rev";
-					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
-					clock-names = "sys_clk";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x3000 0x1000>;
-
-					venc: encoder@0 {
-						compatible = "ti,omap4-venc";
-						reg = <0 0x1000>;
-						status = "disabled";
-						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
-						clock-names = "fck";
-					};
-				};
-
-				target-module@4000 {
-					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x4000 0x4>,
-					      <0x4010 0x4>,
-					      <0x4014 0x4>;
-					reg-names = "rev", "sysc", "syss";
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-							 SYSC_OMAP2_ENAWAKEUP |
-							 SYSC_OMAP2_SOFTRESET |
-							 SYSC_OMAP2_AUTOIDLE)>;
-					ti,syss-mask = <1>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x4000 0x1000>;
-
-					dsi1: encoder@0 {
-						compatible = "ti,omap4-dsi";
-						reg = <0 0x200>,
-						      <0x200 0x40>,
-						      <0x300 0x20>;
-						reg-names = "proto", "phy", "pll";
-						interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
-							 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
-						clock-names = "fck", "sys_clk";
-
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				target-module@5000 {
-					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x5000 0x4>,
-					      <0x5010 0x4>,
-					      <0x5014 0x4>;
-					reg-names = "rev", "sysc", "syss";
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-							 SYSC_OMAP2_ENAWAKEUP |
-							 SYSC_OMAP2_SOFTRESET |
-							 SYSC_OMAP2_AUTOIDLE)>;
-					ti,syss-mask = <1>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x5000 0x1000>;
-
-					dsi2: encoder@0 {
-						compatible = "ti,omap4-dsi";
-						reg = <0 0x200>,
-						      <0x200 0x40>,
-						      <0x300 0x20>;
-						reg-names = "proto", "phy", "pll";
-						interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
-						         <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
-						clock-names = "fck", "sys_clk";
-
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				target-module@6000 {
-					compatible = "ti,sysc-omap4", "ti,sysc";
-					reg = <0x6000 0x4>,
-					      <0x6010 0x4>;
-					reg-names = "rev", "sysc";
-					/*
-					 * Has SYSC_IDLE_SMART and SYSC_IDLE_SMART_WKUP
-					 * but HDMI audio will fail with them.
-					 */
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>;
-					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
-					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
-						 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
-					clock-names = "fck", "dss_clk";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x6000 0x2000>;
-
-					hdmi: encoder@0 {
-					compatible = "ti,omap4-hdmi";
-						reg = <0 0x200>,
-						      <0x200 0x100>,
-						      <0x300 0x100>,
-						      <0x400 0x1000>;
-						reg-names = "wp", "pll", "phy", "core";
-						interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
-						         <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
-						clock-names = "fck", "sys_clk";
-						dmas = <&sdma 76>;
-						dma-names = "audio_tx";
-					};
-				};
-			};
-		};
-
-		iva_hd_target: target-module@5a000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x5a05a400 0x4>,
-			      <0x5a05a410 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			power-domains = <&prm_ivahd>;
-			resets = <&prm_ivahd 2>;
-			reset-names = "rstctrl";
-			clocks = <&ivahd_clkctrl OMAP4_IVA_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x5a000000 0x5a000000 0x1000000>,
-				 <0x5b000000 0x5b000000 0x1000000>;
-
-			iva {
-				compatible = "ti,ivahd";
-			};
-		};
-	};
-};
-
-#include "omap4-l4.dtsi"
-#include "omap4-l4-abe.dtsi"
-#include "omap44xx-clocks.dtsi"
-
-&prm {
-	prm_mpu: prm@300 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x300 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_tesla: prm@400 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x400 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_abe: prm@500 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x500 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_always_on_core: prm@600 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x600 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_core: prm@700 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x700 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_ivahd: prm@f00 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0xf00 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_cam: prm@1000 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1000 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_dss: prm@1100 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1100 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_gfx: prm@1200 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1200 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_l3init: prm@1300 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1300 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_l4per: prm@1400 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1400 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_cefuse: prm@1600 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1600 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_wkup: prm@1700 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1700 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_emu: prm@1900 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1900 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_dss: prm@1100 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1100 0x40>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_device: prm@1b00 {
-		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1b00 0x40>;
-		#reset-cells = <1>;
-	};
-};
-
-/* Preferred always-on timer for clockevent */
-&timer1_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>;
-		assigned-clock-parents = <&sys_32k_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
deleted file mode 100644
index 581e088231b55..0000000000000
--- a/arch/arm/boot/dts/omap443x-clocks.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP4 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&prm_clocks {
-	bandgap_fclk: bandgap_fclk@1888 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "bandgap_fclk";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1888>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
deleted file mode 100644
index 238aceb799f89..0000000000000
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP443x SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "omap4.dtsi"
-
-/ {
-	cpus {
-		cpu0: cpu@0 {
-			/* OMAP443x variants OPP50-OPPNT */
-			operating-points = <
-				/* kHz    uV */
-				300000  1025000
-				600000  1200000
-				800000  1313000
-				1008000 1375000
-			>;
-			clock-latency = <300000>; /* From legacy driver */
-
-			/* cooling options */
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	thermal-zones {
-		#include "omap4-cpu-thermal.dtsi"
-	};
-
-	ocp {
-		/* 4430 has only gpio_86 tshut and no talert interrupt */
-		bandgap: bandgap@4a002260 {
-			reg = <0x4a002260 0x4
-			       0x4a00232C 0x4>;
-			compatible = "ti,omap4430-bandgap";
-			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-
-			#thermal-sensor-cells = <0>;
-		};
-	};
-
-	ocp {
-		abb_mpu: regulator-abb-mpu {
-			status = "okay";
-
-			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>;
-			reg-names = "base-address", "int-address";
-
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
-			1025000		0	0	0	0	0
-			1200000		0	0	0	0	0
-			1313000		0	0	0	0	0
-			1375000		1	0	0	0	0
-			1389000		1	0	0	0	0
-			>;
-		};
-
-		/* Default unused, just provide register info for record */
-		abb_iva: regulator-abb-iva {
-			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>;
-			reg-names = "base-address", "int-address";
-		};
-
-	};
-
-};
-
-&cpu_thermal {
-	coefficients = <0 20000>;
-};
-
-/include/ "omap443x-clocks.dtsi"
-
-/*
- * Use dpll_per for sgx at 307.2MHz like droid4 stock v3.0.8 Android kernel
- */
-&sgx_module {
-	assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
-			  <&dpll_per_m7x2_ck>;
-	assigned-clock-rates = <0>, <307200000>;
-	assigned-clock-parents = <&dpll_per_m7x2_ck>;
-};
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
deleted file mode 100644
index 1b27a862ae810..0000000000000
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP4460 SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-#include "omap4.dtsi"
-
-/ {
-	cpus {
-		/* OMAP446x 'standard device' variants OPP50 to OPPTurbo */
-		cpu0: cpu@0 {
-			operating-points = <
-				/* kHz    uV */
-				350000  1025000
-				700000  1200000
-				920000  1313000
-			>;
-			clock-latency = <300000>; /* From legacy driver */
-
-			/* cooling options */
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	thermal-zones {
-		#include "omap4-cpu-thermal.dtsi"
-	};
-
-	ocp {
-		bandgap: bandgap@4a002260 {
-			reg = <0x4a002260 0x4
-			       0x4a00232C 0x4
-			       0x4a002378 0x18>;
-			compatible = "ti,omap4460-bandgap";
-			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
-			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */
-
-			#thermal-sensor-cells = <0>;
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			status = "okay";
-
-			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
-			      <0x4A002268 0x4>;
-			reg-names = "base-address", "int-address",
-				    "efuse-address";
-
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
-			1025000		0	0	0	0	0
-			1200000		0	0	0	0	0
-			1313000		0	0	0x100000 0x40000 0
-			1375000		1	0	0	0	0
-			1389000		1	0	0	0	0
-			>;
-		};
-
-		abb_iva: regulator-abb-iva {
-			status = "okay";
-
-			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
-			      <0x4A002268 0x4>;
-			reg-names = "base-address", "int-address",
-				    "efuse-address";
-
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
-			950000		0	0	0	0	0
-			1140000		0	0	0	0	0
-			1291000		0	0	0x200000 0	0
-			1375000		1	0	0	0	0
-			1376000		1	0	0	0	0
-			>;
-		};
-	};
-
-};
-
-&cpu_thermal {
-	coefficients = <348 (-9301)>;
-};
-
-/* Only some L4 CFG interconnect ranges are different on 4460 */
-&l4_cfg_segment_300000 {
-	ranges = <0x00000000 0x00300000 0x020000>,	/* ap 67 */
-		 <0x00040000 0x00340000 0x001000>,	/* ap 68 */
-		 <0x00020000 0x00320000 0x004000>,	/* ap 71 */
-		 <0x00024000 0x00324000 0x002000>,	/* ap 72 */
-		 <0x00026000 0x00326000 0x001000>,	/* ap 73 */
-		 <0x00027000 0x00327000 0x001000>,	/* ap 74 */
-		 <0x00028000 0x00328000 0x001000>,	/* ap 75 */
-		 <0x00029000 0x00329000 0x001000>,	/* ap 76 */
-		 <0x00030000 0x00330000 0x010000>,	/* ap 77 */
-		 <0x0002a000 0x0032a000 0x002000>,	/* ap 90 */
-		 <0x0002c000 0x0032c000 0x004000>,	/* ap 91 */
-		 <0x00010000 0x00310000 0x008000>,	/* ap 92 */
-		 <0x00018000 0x00318000 0x004000>,	/* ap 93 */
-		 <0x0001c000 0x0031c000 0x002000>,	/* ap 94 */
-		 <0x0001e000 0x0031e000 0x002000>;	/* ap 95 */
-};
-
-&l4_cfg_target_0 {
-	ranges = <0x00000000 0x00000000 0x00010000>,
-		 <0x00010000 0x00010000 0x00008000>,
-		 <0x00018000 0x00018000 0x00004000>,
-		 <0x0001c000 0x0001c000 0x00002000>,
-		 <0x0001e000 0x0001e000 0x00002000>,
-		 <0x00020000 0x00020000 0x00004000>,
-		 <0x00024000 0x00024000 0x00002000>,
-		 <0x00026000 0x00026000 0x00001000>,
-		 <0x00027000 0x00027000 0x00001000>,
-		 <0x00028000 0x00028000 0x00001000>,
-		 <0x00029000 0x00029000 0x00001000>,
-		 <0x0002a000 0x0002a000 0x00002000>,
-		 <0x0002c000 0x0002c000 0x00004000>,
-		 <0x00030000 0x00030000 0x00010000>;
-};
-
-&pmu {
-	compatible = "arm,cortex-a9-pmu";
-	interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-/include/ "omap446x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi
deleted file mode 100644
index d9362fef6720a..0000000000000
--- a/arch/arm/boot/dts/omap446x-clocks.dtsi
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP4 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&prm_clocks {
-	div_ts_ck: div_ts_ck@1888 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "div_ts_ck";
-		clocks = <&l4_wkup_clk_mux_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1888>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	bandgap_ts_fclk: bandgap_ts_fclk@1888 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "bandgap_ts_fclk";
-		clocks = <&div_ts_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1888>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
deleted file mode 100644
index 8df73d2856389..0000000000000
--- a/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ /dev/null
@@ -1,1483 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP4 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&cm1_clocks {
-	extalt_clkin_ck: extalt_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "extalt_clkin_ck";
-		clock-frequency = <59000000>;
-	};
-
-	pad_clks_src_ck: pad_clks_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "pad_clks_src_ck";
-		clock-frequency = <12000000>;
-	};
-
-	pad_clks_ck: pad_clks_ck@108 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "pad_clks_ck";
-		clocks = <&pad_clks_src_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0108>;
-	};
-
-	pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "pad_slimbus_core_clks_ck";
-		clock-frequency = <12000000>;
-	};
-
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "secure_32k_clk_src_ck";
-		clock-frequency = <32768>;
-	};
-
-	slimbus_src_clk: slimbus_src_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "slimbus_src_clk";
-		clock-frequency = <12000000>;
-	};
-
-	slimbus_clk: slimbus_clk@108 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "slimbus_clk";
-		clocks = <&slimbus_src_clk>;
-		ti,bit-shift = <10>;
-		reg = <0x0108>;
-	};
-
-	sys_32k_ck: sys_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "sys_32k_ck";
-		clock-frequency = <32768>;
-	};
-
-	virt_12000000_ck: virt_12000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_12000000_ck";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13000000_ck: virt_13000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_13000000_ck";
-		clock-frequency = <13000000>;
-	};
-
-	virt_16800000_ck: virt_16800000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_16800000_ck";
-		clock-frequency = <16800000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_19200000_ck";
-		clock-frequency = <19200000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_26000000_ck";
-		clock-frequency = <26000000>;
-	};
-
-	virt_27000000_ck: virt_27000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_27000000_ck";
-		clock-frequency = <27000000>;
-	};
-
-	virt_38400000_ck: virt_38400000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_38400000_ck";
-		clock-frequency = <38400000>;
-	};
-
-	tie_low_clock_ck: tie_low_clock_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "tie_low_clock_ck";
-		clock-frequency = <0>;
-	};
-
-	utmi_phy_clkout_ck: utmi_phy_clkout_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "utmi_phy_clkout_ck";
-		clock-frequency = <60000000>;
-	};
-
-	xclk60mhsp1_ck: xclk60mhsp1_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "xclk60mhsp1_ck";
-		clock-frequency = <60000000>;
-	};
-
-	xclk60mhsp2_ck: xclk60mhsp2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "xclk60mhsp2_ck";
-		clock-frequency = <60000000>;
-	};
-
-	xclk60motg_ck: xclk60motg_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "xclk60motg_ck";
-		clock-frequency = <60000000>;
-	};
-
-	dpll_abe_ck: dpll_abe_ck@1e0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-m4xen-clock";
-		clock-output-names = "dpll_abe_ck";
-		clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
-		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
-	};
-
-	dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_abe_x2_ck";
-		clocks = <&dpll_abe_ck>;
-		reg = <0x01f0>;
-	};
-
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_abe_m2x2_ck";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	abe_24m_fclk: abe_24m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "abe_24m_fclk";
-		clocks = <&dpll_abe_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	abe_clk: abe_clk@108 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "abe_clk";
-		clocks = <&dpll_abe_m2x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x0108>;
-		ti,index-power-of-two;
-	};
-
-
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_abe_m3x2_ck";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "core_hsd_byp_clk_mux_ck";
-		clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x012c>;
-	};
-
-	dpll_core_ck: dpll_core_ck@120 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-core-clock";
-		clock-output-names = "dpll_core_ck";
-		clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
-		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_core_x2_ck";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m6x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m2_ck: dpll_core_m2_ck@130 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m2_ck";
-		clocks = <&dpll_core_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0130>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	ddrphy_ck: ddrphy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "ddrphy_ck";
-		clocks = <&dpll_core_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m5x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x013c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	div_core_ck: div_core_ck@100 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "div_core_ck";
-		clocks = <&dpll_core_m5x2_ck>;
-		reg = <0x0100>;
-		ti,max-div = <2>;
-	};
-
-	div_iva_hs_clk: div_iva_hs_clk@1dc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "div_iva_hs_clk";
-		clocks = <&dpll_core_m5x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x01dc>;
-		ti,index-power-of-two;
-	};
-
-	div_mpu_hs_clk: div_mpu_hs_clk@19c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "div_mpu_hs_clk";
-		clocks = <&dpll_core_m5x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x019c>;
-		ti,index-power-of-two;
-	};
-
-	dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m4x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0138>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dll_clk_div_ck: dll_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dll_clk_div_ck";
-		clocks = <&dpll_core_m4x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_abe_m2_ck";
-		clocks = <&dpll_abe_ck>;
-		ti,max-div = <31>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clock-output-names = "dpll_core_m3x2_gate_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0134>;
-	};
-
-	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clock-output-names = "dpll_core_m3x2_div_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0134>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clock-output-names = "dpll_core_m3x2_ck";
-		clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
-	};
-
-	dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m7x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0144>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "iva_hsd_byp_clk_mux_ck";
-		clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
-		ti,bit-shift = <23>;
-		reg = <0x01ac>;
-	};
-
-	dpll_iva_ck: dpll_iva_ck@1a0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_iva_ck";
-		clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
-		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
-		assigned-clocks = <&dpll_iva_ck>;
-		assigned-clock-rates = <931200000>;
-	};
-
-	dpll_iva_x2_ck: dpll_iva_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_iva_x2_ck";
-		clocks = <&dpll_iva_ck>;
-	};
-
-	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_iva_m4x2_ck";
-		clocks = <&dpll_iva_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_iva_m4x2_ck>;
-		assigned-clock-rates = <465600000>;
-	};
-
-	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_iva_m5x2_ck";
-		clocks = <&dpll_iva_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01bc>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_iva_m5x2_ck>;
-		assigned-clock-rates = <266100000>;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck@160 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_mpu_ck";
-		clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
-		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_mpu_m2_ck";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0170>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	per_hs_clk_div_ck: per_hs_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "per_hs_clk_div_ck";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usb_hs_clk_div_ck: usb_hs_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "usb_hs_clk_div_ck";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	l3_div_ck: l3_div_ck@100 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "l3_div_ck";
-		clocks = <&div_core_ck>;
-		ti,bit-shift = <4>;
-		ti,max-div = <2>;
-		reg = <0x0100>;
-	};
-
-	l4_div_ck: l4_div_ck@100 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "l4_div_ck";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <2>;
-		reg = <0x0100>;
-	};
-
-	lp_clk_div_ck: lp_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "lp_clk_div_ck";
-		clocks = <&dpll_abe_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	mpu_periphclk: mpu_periphclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "mpu_periphclk";
-		clocks = <&dpll_mpu_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	ocp_abe_iclk: ocp_abe_iclk@528 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "ocp_abe_iclk";
-		clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>;
-		ti,bit-shift = <24>;
-		reg = <0x0528>;
-		ti,dividers = <2>, <1>;
-	};
-
-	per_abe_24m_fclk: per_abe_24m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "per_abe_24m_fclk";
-		clocks = <&dpll_abe_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "dummy_ck";
-		clock-frequency = <0>;
-	};
-};
-
-&prm_clocks {
-	sys_clkin_ck: sys_clkin_ck@110 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "sys_clkin_ck";
-		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
-		reg = <0x0110>;
-		ti,index-starts-at-one;
-	};
-
-	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "abe_dpll_bypass_clk_mux_ck";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0108>;
-	};
-
-	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "abe_dpll_refclk_mux_ck";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		reg = <0x010c>;
-	};
-
-	dbgclk_mux_ck: dbgclk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dbgclk_mux_ck";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "l4_wkup_clk_mux_ck";
-		clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
-		reg = <0x0108>;
-	};
-
-	syc_clk_div_ck: syc_clk_div_ck@100 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "syc_clk_div_ck";
-		clocks = <&sys_clkin_ck>;
-		reg = <0x0100>;
-		ti,max-div = <2>;
-	};
-
-	usim_ck: usim_ck@1858 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "usim_ck";
-		clocks = <&dpll_per_m4x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1858>;
-		ti,dividers = <14>, <18>;
-	};
-
-	usim_fclk: usim_fclk@1858 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "usim_fclk";
-		clocks = <&usim_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1858>;
-	};
-
-	trace_clk_div_ck: trace_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,clkdm-gate-clock";
-		clock-output-names = "trace_clk_div_ck";
-		clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>;
-	};
-};
-
-&prm_clockdomains {
-	emu_sys_clkdm: emu_sys_clkdm {
-		compatible = "ti,clockdomain";
-		clock-output-names = "emu_sys_clkdm";
-		clocks = <&trace_clk_div_ck>;
-	};
-};
-
-&cm2_clocks {
-	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "per_hsd_byp_clk_mux_ck";
-		clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x014c>;
-	};
-
-	dpll_per_ck: dpll_per_ck@140 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_per_ck";
-		clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
-		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck@150 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_m2_ck";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_x2_ck: dpll_per_x2_ck@150 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_per_x2_ck";
-		clocks = <&dpll_per_ck>;
-		reg = <0x0150>;
-	};
-
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_m2x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clock-output-names = "dpll_per_m3x2_gate_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0154>;
-	};
-
-	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clock-output-names = "dpll_per_m3x2_div_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clock-output-names = "dpll_per_m3x2_ck";
-		clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
-	};
-
-	dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_m4x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_m5x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_m6x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0160>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_m7x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0164>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_ck: dpll_usb_ck@180 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-j-type-clock";
-		clock-output-names = "dpll_usb_ck";
-		clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
-		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
-	};
-
-	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clock-output-names = "dpll_usb_clkdcoldo_ck";
-		clocks = <&dpll_usb_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b4>;
-		ti,clock-mult = <1>;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_usb_m2_ck";
-		clocks = <&dpll_usb_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0190>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	ducati_clk_mux_ck: ducati_clk_mux_ck@100 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "ducati_clk_mux_ck";
-		clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
-		reg = <0x0100>;
-	};
-
-	func_12m_fclk: func_12m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_12m_fclk";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	func_24m_clk: func_24m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_24m_clk";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_24mc_fclk: func_24mc_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_24mc_fclk";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	func_48m_fclk: func_48m_fclk@108 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "func_48m_fclk";
-		clocks = <&dpll_per_m2x2_ck>;
-		reg = <0x0108>;
-		ti,dividers = <4>, <8>;
-	};
-
-	func_48mc_fclk: func_48mc_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_48mc_fclk";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_64m_fclk: func_64m_fclk@108 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "func_64m_fclk";
-		clocks = <&dpll_per_m4x2_ck>;
-		reg = <0x0108>;
-		ti,dividers = <2>, <4>;
-	};
-
-	func_96m_fclk: func_96m_fclk@108 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "func_96m_fclk";
-		clocks = <&dpll_per_m2x2_ck>;
-		reg = <0x0108>;
-		ti,dividers = <2>, <4>;
-	};
-
-	init_60m_fclk: init_60m_fclk@104 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "init_60m_fclk";
-		clocks = <&dpll_usb_m2_ck>;
-		reg = <0x0104>;
-		ti,dividers = <1>, <8>;
-	};
-
-	per_abe_nc_fclk: per_abe_nc_fclk@108 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "per_abe_nc_fclk";
-		clocks = <&dpll_abe_m2_ck>;
-		reg = <0x0108>;
-		ti,max-div = <2>;
-	};
-
-	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "usb_phy_cm_clk32k";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0640>;
-	};
-};
-
-&cm2_clockdomains {
-	l3_init_clkdm: l3_init_clkdm {
-		compatible = "ti,clockdomain";
-		clock-output-names = "l3_init_clkdm";
-		clocks = <&dpll_usb_ck>;
-	};
-};
-
-&scrm_clocks {
-	auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clock-output-names = "auxclk0_src_gate_ck";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0310>;
-	};
-
-	auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clock-output-names = "auxclk0_src_mux_ck";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0310>;
-	};
-
-	auxclk0_src_ck: auxclk0_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clock-output-names = "auxclk0_src_ck";
-		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
-	};
-
-	auxclk0_ck: auxclk0_ck@310 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "auxclk0_ck";
-		clocks = <&auxclk0_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0310>;
-	};
-
-	auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clock-output-names = "auxclk1_src_gate_ck";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0314>;
-	};
-
-	auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clock-output-names = "auxclk1_src_mux_ck";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0314>;
-	};
-
-	auxclk1_src_ck: auxclk1_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clock-output-names = "auxclk1_src_ck";
-		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
-	};
-
-	auxclk1_ck: auxclk1_ck@314 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "auxclk1_ck";
-		clocks = <&auxclk1_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0314>;
-	};
-
-	auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clock-output-names = "auxclk2_src_gate_ck";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0318>;
-	};
-
-	auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clock-output-names = "auxclk2_src_mux_ck";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0318>;
-	};
-
-	auxclk2_src_ck: auxclk2_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clock-output-names = "auxclk2_src_ck";
-		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
-	};
-
-	auxclk2_ck: auxclk2_ck@318 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "auxclk2_ck";
-		clocks = <&auxclk2_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0318>;
-	};
-
-	auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clock-output-names = "auxclk3_src_gate_ck";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x031c>;
-	};
-
-	auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clock-output-names = "auxclk3_src_mux_ck";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x031c>;
-	};
-
-	auxclk3_src_ck: auxclk3_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clock-output-names = "auxclk3_src_ck";
-		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
-	};
-
-	auxclk3_ck: auxclk3_ck@31c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "auxclk3_ck";
-		clocks = <&auxclk3_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x031c>;
-	};
-
-	auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clock-output-names = "auxclk4_src_gate_ck";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0320>;
-	};
-
-	auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clock-output-names = "auxclk4_src_mux_ck";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0320>;
-	};
-
-	auxclk4_src_ck: auxclk4_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clock-output-names = "auxclk4_src_ck";
-		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
-	};
-
-	auxclk4_ck: auxclk4_ck@320 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "auxclk4_ck";
-		clocks = <&auxclk4_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0320>;
-	};
-
-	auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clock-output-names = "auxclk5_src_gate_ck";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0324>;
-	};
-
-	auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clock-output-names = "auxclk5_src_mux_ck";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0324>;
-	};
-
-	auxclk5_src_ck: auxclk5_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clock-output-names = "auxclk5_src_ck";
-		clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
-	};
-
-	auxclk5_ck: auxclk5_ck@324 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "auxclk5_ck";
-		clocks = <&auxclk5_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0324>;
-	};
-
-	auxclkreq0_ck: auxclkreq0_ck@210 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "auxclkreq0_ck";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0210>;
-	};
-
-	auxclkreq1_ck: auxclkreq1_ck@214 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "auxclkreq1_ck";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0214>;
-	};
-
-	auxclkreq2_ck: auxclkreq2_ck@218 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "auxclkreq2_ck";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0218>;
-	};
-
-	auxclkreq3_ck: auxclkreq3_ck@21c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "auxclkreq3_ck";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x021c>;
-	};
-
-	auxclkreq4_ck: auxclkreq4_ck@220 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "auxclkreq4_ck";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0220>;
-	};
-
-	auxclkreq5_ck: auxclkreq5_ck@224 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "auxclkreq5_ck";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0224>;
-	};
-};
-
-&cm1 {
-	mpuss_cm: mpuss_cm@300 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "mpuss_cm";
-		reg = <0x300 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x300 0x100>;
-
-		mpuss_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "mpuss_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	tesla_cm: tesla_cm@400 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "tesla_cm";
-		reg = <0x400 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x400 0x100>;
-
-		tesla_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "tesla_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	abe_cm: abe_cm@500 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "abe_cm";
-		reg = <0x500 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x500 0x100>;
-
-		abe_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "abe_clkctrl";
-			reg = <0x20 0x6c>;
-			#clock-cells = <2>;
-		};
-	};
-
-};
-
-&cm2 {
-	l4_ao_cm: l4_ao_cm@600 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l4_ao_cm";
-		reg = <0x600 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x600 0x100>;
-
-		l4_ao_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4_ao_clkctrl";
-			reg = <0x20 0x1c>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3_1_cm: l3_1_cm@700 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3_1_cm";
-		reg = <0x700 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x700 0x100>;
-
-		l3_1_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3_1_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3_2_cm: l3_2_cm@800 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3_2_cm";
-		reg = <0x800 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x800 0x100>;
-
-		l3_2_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3_2_clkctrl";
-			reg = <0x20 0x14>;
-			#clock-cells = <2>;
-		};
-	};
-
-	ducati_cm: ducati_cm@900 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "ducati_cm";
-		reg = <0x900 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x900 0x100>;
-
-		ducati_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "ducati_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3_dma_cm: l3_dma_cm@a00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3_dma_cm";
-		reg = <0xa00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xa00 0x100>;
-
-		l3_dma_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3_dma_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3_emif_cm: l3_emif_cm@b00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3_emif_cm";
-		reg = <0xb00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xb00 0x100>;
-
-		l3_emif_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3_emif_clkctrl";
-			reg = <0x20 0x1c>;
-			#clock-cells = <2>;
-		};
-	};
-
-	d2d_cm: d2d_cm@c00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "d2d_cm";
-		reg = <0xc00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xc00 0x100>;
-
-		d2d_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "d2d_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4_cfg_cm: l4_cfg_cm@d00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l4_cfg_cm";
-		reg = <0xd00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xd00 0x100>;
-
-		l4_cfg_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4_cfg_clkctrl";
-			reg = <0x20 0x14>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3_instr_cm: l3_instr_cm@e00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3_instr_cm";
-		reg = <0xe00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xe00 0x100>;
-
-		l3_instr_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3_instr_clkctrl";
-			reg = <0x20 0x24>;
-			#clock-cells = <2>;
-		};
-	};
-
-	ivahd_cm: ivahd_cm@f00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "ivahd_cm";
-		reg = <0xf00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xf00 0x100>;
-
-		ivahd_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "ivahd_clkctrl";
-			reg = <0x20 0xc>;
-			#clock-cells = <2>;
-		};
-	};
-
-	iss_cm: iss_cm@1000 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "iss_cm";
-		reg = <0x1000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1000 0x100>;
-
-		iss_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "iss_clkctrl";
-			reg = <0x20 0xc>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3_dss_cm: l3_dss_cm@1100 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3_dss_cm";
-		reg = <0x1100 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1100 0x100>;
-
-		l3_dss_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3_dss_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3_gfx_cm: l3_gfx_cm@1200 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3_gfx_cm";
-		reg = <0x1200 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1200 0x100>;
-
-		l3_gfx_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3_gfx_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3_init_cm: l3_init_cm@1300 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3_init_cm";
-		reg = <0x1300 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1300 0x100>;
-
-		l3_init_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3_init_clkctrl";
-			reg = <0x20 0xc4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4_per_cm: clock@1400 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l4_per_cm";
-		reg = <0x1400 0x200>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1400 0x200>;
-
-		l4_per_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4_per_clkctrl";
-			reg = <0x20 0x144>;
-			#clock-cells = <2>;
-		};
-
-		l4_secure_clkctrl: clock@1a0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4_secure_clkctrl";
-			reg = <0x1a0 0x3c>;
-			#clock-cells = <2>;
-		};
-	};
-};
-
-&prm {
-	l4_wkup_cm: l4_wkup_cm@1800 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l4_wkup_cm";
-		reg = <0x1800 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1800 0x100>;
-
-		l4_wkup_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4_wkup_clkctrl";
-			reg = <0x20 0x5c>;
-			#clock-cells = <2>;
-		};
-	};
-
-	emu_sys_cm: emu_sys_cm@1a00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "emu_sys_cm";
-		reg = <0x1a00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1a00 0x100>;
-
-		emu_sys_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "emu_sys_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
deleted file mode 100644
index 373984c130e01..0000000000000
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ /dev/null
@@ -1,755 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-#include "omap5.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	vmain: fixedregulator-vmain {
-		compatible = "regulator-fixed";
-		regulator-name = "vmain";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vsys_cobra: fixedregulator-vsys_cobra {
-		compatible = "regulator-fixed";
-		regulator-name = "vsys_cobra";
-		vin-supply = <&vmain>;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vmmcsd_fixed: fixedregulator-mmcsd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	mmc3_pwrseq: sdhci0_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&clk32kgaudio>;
-		clock-names = "ext_clock";
-	};
-
-	vmmcsdio_fixed: fixedregulator-mmcsdio {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsdio_fixed";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>;	/* gpio140 WLAN_EN */
-		enable-active-high;
-		startup-delay-us = <70000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_pins>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
-		clocks = <&auxclk1_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-		#phy-cells = <0>;
-	};
-
-	/* HS USB Host PHY on PORT 3 */
-	hsusb3_phy: hsusb3_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
-		#phy-cells = <0>;
-	};
-
-	tpd12s015: encoder {
-		compatible = "ti,tpd12s015";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
-		/* gpios defined in the board specific dts */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "b";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	sound: sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "omap5-uevm";
-
-		ti,jack-detection;
-		ti,mclk-freq = <19200000>;
-
-		ti,mcpdm = <&mcpdm>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"Line Out", "AUXL",
-			"Line Out", "AUXR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias",
-			"AFML", "Line In",
-			"AFMR", "Line In";
-	};
-};
-
-&gpio8 {
-	/* TI trees use GPIO instead of msecure, see also muxing */
-	msecure-hog {
-		gpio-hog;
-		gpios = <10 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "gpio8_234/msecure";
-	};
-};
-
-&omap5_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&usbhost_pins
-			&led_gpio_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-			OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
-			OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
-			OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
-			OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
-			OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
-			OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
-			OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
-			OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
-			OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
-			OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	mcspi2_pins: pinmux_mcspi2_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
-			OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
-			OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
-			OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
-		>;
-	};
-
-	mcspi3_pins: pinmux_mcspi3_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
-			OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
-			OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
-			OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
-			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
-			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
-			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
-			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
-			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
-		>;
-	};
-
-	wlan_pins: pinmux_wlan_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
-		>;
-	};
-
-	/* TI trees use GPIO mode; msecure mode does not work reliably? */
-	palmas_msecure_pins: palmas_msecure_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
-		>;
-	};
-
-	usbhost_pins: pinmux_usbhost_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
-			OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
-
-			OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
-			OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
-
-			OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
-			OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
-		>;
-	};
-
-	led_gpio_pins: pinmux_led_gpio_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
-			OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
-			OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
-			OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
-			OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
-		>;
-	};
-
-	uart5_pins: pinmux_uart5_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
-			OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
-			OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
-			OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
-			OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
-		>;
-	};
-};
-
-&omap5_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&usbhost_wkup_pins
-	>;
-
-	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
-		pinctrl-single,pins = <
-			/* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
-			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
-		>;
-	};
-
-	wlcore_irq_pin: pinmux_wlcore_irq_pin {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
-		>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&ldo9_reg>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	vmmc-supply = <&vmmcsdio_fixed>;
-	mmc-pwrseq = <&mmc3_pwrseq>;
-	bus-width = <4>;
-	non-removable;
-	cap-power-off-card;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins>;
-	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
-			       &omap5_pmx_core 0x16a>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlcore_irq_pin>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
-		ref-clock-frequency = <26000000>;
-	};
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	palmas: palmas@48 {
-		compatible = "ti,palmas";
-		/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
-		reg = <0x48>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,system-power-controller;
-		ti,mux-pad1 = <0xa1>;
-		ti,mux-pad2 = <0x1b>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
-
-		palmas_gpio: gpio {
-			compatible = "ti,palmas-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		extcon_usb3: palmas_usb {
-			compatible = "ti,palmas-usb-vid";
-			ti,enable-vbus-detection;
-			ti,enable-id-detection;
-			ti,wakeup;
-			id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		clk32kgaudio: palmas_clk32k@1 {
-			compatible = "ti,palmas-clk32kgaudio";
-			#clock-cells = <0>;
-		};
-
-		rtc {
-			compatible = "ti,palmas-rtc";
-			interrupt-parent = <&palmas>;
-			interrupts = <8 IRQ_TYPE_NONE>;
-			ti,backup-battery-chargeable;
-			ti,backup-battery-charge-high-current;
-		};
-
-		gpadc: gpadc {
-			compatible = "ti,palmas-gpadc";
-			interrupts = <18 0
-				      16 0
-				      17 0>;
-			#io-channel-cells = <1>;
-			ti,channel0-current-microamp = <5>;
-			ti,channel3-current-microamp = <10>;
-		};
-
-		palmas_pmic {
-			compatible = "ti,palmas-pmic";
-			interrupt-parent = <&palmas>;
-			interrupts = <14 IRQ_TYPE_NONE>;
-			interrupt-names = "short-irq";
-
-			ti,ldo6-vibrator;
-
-			smps123-in-supply = <&vsys_cobra>;
-			smps45-in-supply = <&vsys_cobra>;
-			smps6-in-supply = <&vsys_cobra>;
-			smps7-in-supply = <&vsys_cobra>;
-			smps8-in-supply = <&vsys_cobra>;
-			smps9-in-supply = <&vsys_cobra>;
-			smps10_out2-in-supply = <&vsys_cobra>;
-			smps10_out1-in-supply = <&vsys_cobra>;
-			ldo1-in-supply = <&vsys_cobra>;
-			ldo2-in-supply = <&vsys_cobra>;
-			ldo3-in-supply = <&vdds_1v8_main>;
-			ldo4-in-supply = <&vdds_1v8_main>;
-			ldo5-in-supply = <&vsys_cobra>;
-			ldo6-in-supply = <&vdds_1v8_main>;
-			ldo7-in-supply = <&vsys_cobra>;
-			ldo8-in-supply = <&vsys_cobra>;
-			ldo9-in-supply = <&vmmcsd_fixed>;
-			ldoln-in-supply = <&vsys_cobra>;
-			ldousb-in-supply = <&vsys_cobra>;
-
-			regulators {
-				smps123_reg: smps123 {
-					/* VDD_OPP_MPU */
-					regulator-name = "smps123";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_OPP_MM */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_DDR3 - over VDD_SMPS6 */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdds_1v8_main:
-				smps7_reg: smps7 {
-					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
-					regulator-name = "smps7";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* VDD_OPP_CORE */
-					regulator-name = "smps8";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps9_reg: smps9 {
-					/* VDDA_2v1_AUD over VDD_2v1 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2100000>;
-					ti,smps-range = <0x80>;
-				};
-
-				smps10_out2_reg: smps10_out2 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out2";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps10_out1_reg: smps10_out1 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out1";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-				};
-
-				ldo1_reg: ldo1 {
-					/* VDDAPHY_CAM: vdda_csiport */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VCC_2V8_DISP: Does not go anywhere */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					/* Unused */
-					status = "disabled";
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDAPHY_MDM: vdda_lli */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-					/* Only if Modem is used */
-					status = "disabled";
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo5_reg: ldo5 {
-					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
-					regulator-name = "ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo6_reg: ldo6 {
-					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
-					regulator-name = "ldo6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo7_reg: ldo7 {
-					/* VDD_VPP: vpp1 */
-					regulator-name = "ldo7";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					/* Only for efuse reprograming! */
-					status = "disabled";
-				};
-
-				ldo8_reg: ldo8 {
-					/* VDD_3v0: Does not go anywhere */
-					regulator-name = "ldo8";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-					/* Unused */
-					status = "disabled";
-				};
-
-				ldo9_reg: ldo9 {
-					/* VCC_DV_SDIO: vdds_sdcard */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3250000>;
-					regulator-max-microvolt = <3250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				regen3_reg: regen3 {
-					/* REGEN3 controls LDO9 supply to card */
-					regulator-name = "regen3";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-
-		palmas_power_button: palmas_power_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&palmas>;
-			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-		};
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		#clock-cells = <0>;
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_LOW>;
-
-		/* audpwron gpio defined in the board specific dts */
-
-		vio-supply = <&smps7_reg>;
-		v2v1-supply = <&smps9_reg>;
-		enable-active-high;
-
-		clocks = <&clk32kgaudio>, <&fref_xtal_ck>;
-		clock-names = "clk32k", "mclk";
-	};
-};
-
-&mcpdm_module {
-	/* Module on the SoC needs external clock from the PMIC */
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&mcpdm {
-	clocks = <&twl6040>;
-	clock-names = "pdmclk";
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&usbhshost {
-	port2-mode = "ehci-hsic";
-	port3-mode = "ehci-hsic";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy &hsusb3_phy>;
-};
-
-&usb3 {
-	extcon = <&extcon_usb3>;
-	vbus-supply = <&smps10_out1_reg>;
-};
-
-&dwc3 {
-	extcon = <&extcon_usb3>;
-	dr_mode = "otg";
-};
-
-&mcspi1 {
-
-};
-
-&mcspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi2_pins>;
-};
-
-&mcspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi3_pins>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-			      <&omap5_pmx_core 0x19c>;
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart5_pins>;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps123_reg>;
-};
-
-&dss {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-
-	/* vdda-supply populated in board specific dts file */
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
deleted file mode 100644
index af288d63a26a4..0000000000000
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ /dev/null
@@ -1,697 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Support for CompuLab CM-T54
- */
-/dts-v1/;
-
-#include "omap5.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	model = "CompuLab CM-T54";
-	compatible = "compulab,omap5-cm-t54", "ti,omap5";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x7f000000>; /* 2048 MB */
-	};
-
-	aliases {
-		display0 = &hdmi0;
-		display1 = &dvi0;
-		display2 = &lcd0;
-	};
-
-	vmmcsd_fixed: fixed-regulator-mmcsd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vwlan_pdn_fixed: fixed-regulator-vwlan-pdn {
-		compatible = "regulator-fixed";
-		regulator-name = "vwlan_pdn_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&ldo2_reg>;
-		gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>;   /* gpio4_109 */
-		startup-delay-us = <1000>;
-		enable-active-high;
-	};
-
-	vwlan_fixed: fixed-regulator-vwlan {
-		compatible = "regulator-fixed";
-		regulator-name = "vwlan_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vwlan_pdn_fixed>;
-		gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;   /* gpio4_110 */
-		startup-delay-us = <1000>;
-		enable-active-high;
-	};
-
-	ads7846reg: ads7846-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "ads7846-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
-		#phy-cells = <0>;
-	};
-
-	/* HS USB Host PHY on PORT 3 */
-	hsusb3_phy: hsusb3_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
-		#phy-cells = <0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "Heartbeat";
-			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	lcd0: display {
-		compatible = "startek,startek-kd050c", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <33000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <40>;
-			hback-porch = <40>;
-			hsync-len = <43>;
-			vback-porch = <29>;
-			vfront-porch = <13>;
-			vsync-len = <3>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_lcd_out>;
-			};
-		};
-	};
-
-	hdmi0: connector0 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_conn_pins>;
-
-		hpd-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-	};
-
-	tfp410: encoder0 {
-		compatible = "ti,tfp410";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&dpi_dvi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector1 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c2>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-};
-
-&omap5_pmx_wkup {
-
-	ads7846_pins: pinmux_ads7846_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6)  /* llib_wakereqin.gpio1_wk15 */
-		>;
-	};
-
-	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
-		pinctrl-single,pins = <
-			/* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
-			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-};
-
-&omap5_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&led_gpio_pins
-			&usbhost_pins
-	>;
-
-	led_gpio_pins: pinmux_led_gpio_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */
-			OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x01b8, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
-			OMAP5_IOPAD(0x01ba, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */
-			OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */
-			OMAP5_IOPAD(0x01e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */
-			OMAP5_IOPAD(0x01e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */
-			OMAP5_IOPAD(0x01ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */
-			OMAP5_IOPAD(0x01ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */
-			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */
-			OMAP5_IOPAD(0x0044, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */
-			OMAP5_IOPAD(0x0046, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */
-			OMAP5_IOPAD(0x0048, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */
-			OMAP5_IOPAD(0x004a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */
-			OMAP5_IOPAD(0x004c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */
-			OMAP5_IOPAD(0x004e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */
-			OMAP5_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */
-			OMAP5_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
-			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
-			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
-			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
-			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
-			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
-		>;
-	};
-
-	wlan_gpios_pins: pinmux_wlan_gpios_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_ul_data.gpio4_109 */
-			OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_dl_data.gpio4_110 */
-		>;
-	};
-
-	usbhost_pins: pinmux_usbhost_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_strobe */
-			OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_data */
-
-			OMAP5_IOPAD(0x01dc, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_strobe */
-			OMAP5_IOPAD(0x01de, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_data */
-
-			OMAP5_IOPAD(0x00a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */
-			OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x013c, PIN_INPUT | MUX_MODE0) /* hdmi_cec */
-			OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */
-			OMAP5_IOPAD(0x0142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda */
-		>;
-	};
-
-	lcd_pins: pinmux_lcd_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0172, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* timer11_pwm_evt.gpio8_227 */
-		>;
-	};
-
-	hdmi_conn_pins: pinmux_hdmi_conn_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x013e, PIN_INPUT | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0104, PIN_OUTPUT | MUX_MODE3) /* rfbi_data15.dispc_data15 */
-			OMAP5_IOPAD(0x0106, PIN_OUTPUT | MUX_MODE3) /* rfbi_data14.dispc_data14 */
-			OMAP5_IOPAD(0x0108, PIN_OUTPUT | MUX_MODE3) /* rfbi_data13.dispc_data13 */
-			OMAP5_IOPAD(0x010a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data12.dispc_data12 */
-			OMAP5_IOPAD(0x010c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data11.dispc_data11 */
-			OMAP5_IOPAD(0x010e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data10.dispc_data10 */
-			OMAP5_IOPAD(0x0110, PIN_OUTPUT | MUX_MODE3) /* rfbi_data9.dispc_data9 */
-			OMAP5_IOPAD(0x0112, PIN_OUTPUT | MUX_MODE3) /* rfbi_data8.dispc_data8 */
-			OMAP5_IOPAD(0x0114, PIN_OUTPUT | MUX_MODE3) /* rfbi_data7.dispc_data7 */
-			OMAP5_IOPAD(0x0116, PIN_OUTPUT | MUX_MODE3) /* rfbi_data6.dispc_data6 */
-			OMAP5_IOPAD(0x0118, PIN_OUTPUT | MUX_MODE3) /* rfbi_data5.dispc_data5 */
-			OMAP5_IOPAD(0x011a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data4.dispc_data4 */
-			OMAP5_IOPAD(0x011c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data3.dispc_data3 */
-			OMAP5_IOPAD(0x011e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data2.dispc_data2 */
-			OMAP5_IOPAD(0x0120, PIN_OUTPUT | MUX_MODE3) /* rfbi_data1.dispc_data1 */
-			OMAP5_IOPAD(0x0122, PIN_OUTPUT | MUX_MODE3) /* rfbi_data0.dispc_data0 */
-			OMAP5_IOPAD(0x0124, PIN_OUTPUT | MUX_MODE3) /* rfbi_we.dispc_vsync */
-			OMAP5_IOPAD(0x0126, PIN_OUTPUT | MUX_MODE3) /* rfbi_cs0.dispc_hsync */
-			OMAP5_IOPAD(0x0128, PIN_OUTPUT | MUX_MODE3) /* rfbi_a0.dispc_de */
-			OMAP5_IOPAD(0x012a, PIN_OUTPUT | MUX_MODE3) /* rfbi_re.dispc_pclk */
-			OMAP5_IOPAD(0x012c, PIN_OUTPUT | MUX_MODE3) /* rfbi_hsync0.dispc_data17 */
-			OMAP5_IOPAD(0x012e, PIN_OUTPUT | MUX_MODE3) /* rfbi_te_vsync0.dispc_data16 */
-			OMAP5_IOPAD(0x0130, PIN_OUTPUT | MUX_MODE3) /* gpio6_182.dispc_data18 */
-			OMAP5_IOPAD(0x0132, PIN_OUTPUT | MUX_MODE3) /* gpio6_183.dispc_data19 */
-			OMAP5_IOPAD(0x0134, PIN_OUTPUT | MUX_MODE3) /* gpio6_184.dispc_data20 */
-			OMAP5_IOPAD(0x0136, PIN_OUTPUT | MUX_MODE3) /* gpio6_185.dispc_data21 */
-			OMAP5_IOPAD(0x0138, PIN_OUTPUT | MUX_MODE3) /* gpio6_186.dispc_data22 */
-			OMAP5_IOPAD(0x013a, PIN_OUTPUT | MUX_MODE3) /* gpio6_187.dispc_data23 */
-		>;
-	};
-
-	mcspi2_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x00fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
-			OMAP5_IOPAD(0x00fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
-			OMAP5_IOPAD(0x0100, PIN_INPUT | MUX_MODE0) /* mcspi2_somi */
-			OMAP5_IOPAD(0x0102, PIN_INPUT | MUX_MODE0) /* mcspi2_cs0 */
-		>;
-	};
-};
-
-&mcspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi2_pins>;
-
-	/* touch controller */
-	ads7846@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ads7846_pins>;
-
-		compatible = "ti,ads7846";
-		vcc-supply = <&ads7846reg>;
-
-		reg = <0>;				/* CS0 */
-		spi-max-frequency = <1500000>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <15 0>;			/* gpio1_wk15 */
-		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-
-		ti,x-min = /bits/ 16 <0x0>;
-		ti,x-max = /bits/ 16 <0x0fff>;
-		ti,y-min = /bits/ 16 <0x0>;
-		ti,y-max = /bits/ 16 <0x0fff>;
-
-		ti,x-plate-ohms = /bits/ 16 <180>;
-		ti,pressure-max = /bits/ 16 <255>;
-
-		ti,debounce-max = /bits/ 16 <30>;
-		ti,debounce-tol = /bits/ 16 <10>;
-		ti,debounce-rep = /bits/ 16 <1>;
-
-		wakeup-source;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&ldo9_reg>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&mmc3_pins
-		&wlan_gpios_pins
-	>;
-	vmmc-supply = <&vwlan_fixed>;
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	at24@50 {
-		compatible = "atmel,24c02";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
-	palmas: palmas@48 {
-		compatible = "ti,palmas";
-		reg = <0x48>;
-		pinctrl-0 = <&palmas_sys_nirq_pins>;
-		pinctrl-names = "default";
-		/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,system-power-controller;
-
-		extcon_usb3: palmas_usb {
-			compatible = "ti,palmas-usb-vid";
-			ti,enable-vbus-detection;
-			ti,enable-id-detection;
-			ti,wakeup;
-		};
-
-		rtc {
-			compatible = "ti,palmas-rtc";
-			interrupt-parent = <&palmas>;
-			interrupts = <8 IRQ_TYPE_NONE>;
-		};
-
-		palmas_pmic {
-			compatible = "ti,palmas-pmic";
-			interrupt-parent = <&palmas>;
-			interrupts = <14 IRQ_TYPE_NONE>;
-			interrupt-names = "short-irq";
-
-			ti,ldo6-vibrator;
-
-			regulators {
-				smps123_reg: smps123 {
-					/* VDD_OPP_MPU */
-					regulator-name = "smps123";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_OPP_MM */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_DDR3 - over VDD_SMPS6 */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps7_reg: smps7 {
-					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
-					regulator-name = "smps7";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* VDD_OPP_CORE */
-					regulator-name = "smps8";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps9_reg: smps9 {
-					/* VDDA_2v1_AUD over VDD_2v1 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					ti,smps-range = <0x80>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps10_out2_reg: smps10_out2 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out2";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps10_out1_reg: smps10_out1 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out1";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-				};
-
-				ldo1_reg: ldo1 {
-					/* VDDAPHY_CAM: vdda_csiport */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDD_3V3_WLAN */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					startup-delay-us = <1000>;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VCC_1V5_AUD */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo5_reg: ldo5 {
-					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
-					regulator-name = "ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo6_reg: ldo6 {
-					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
-					regulator-name = "ldo6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo7_reg: ldo7 {
-					/* VDD_VPP: vpp1 */
-					regulator-name = "ldo7";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					/* Only for efuse reprograming! */
-					status = "disabled";
-				};
-
-				ldo8_reg: ldo8 {
-					/* VDD_3V_GP: act led/serial console */
-					regulator-name = "ldo8";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo9_reg: ldo9 {
-					/* VCC_DV_SDIO: vdds_sdcard */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3250000>;
-					regulator-max-microvolt = <3250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				regen3_reg: regen3 {
-					/* REGEN3 controls LDO9 supply to card */
-					regulator-name = "regen3";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <100000>;
-};
-
-&usbhshost {
-	port2-mode = "ehci-hsic";
-	port3-mode = "ehci-hsic";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy &hsusb3_phy>;
-};
-
-&usb3 {
-	extcon = <&extcon_usb3>;
-	vbus-supply = <&smps10_out1_reg>;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps123_reg>;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dpi_dvi_out: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-
-		dpi_lcd_out: endpoint@1 {
-			reg = <1>;
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&dsi2 {
-	status = "okay";
-	vdd-supply = <&ldo4_reg>;
-};
-
-&hdmi {
-	status = "okay";
-	vdda-supply = <&ldo4_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&hdmi_connector_in>;
-			lanes = <1 0 3 2 5 4 7 6>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi
deleted file mode 100644
index e0d8e39a0014b..0000000000000
--- a/arch/arm/boot/dts/omap5-core-thermal.dtsi
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP543x SoC CORE thermal
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-core_thermal: core_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <500>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     2>;
-
-	trips {
-		core_crit: core_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
deleted file mode 100644
index 1b4b7d9136c84..0000000000000
--- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP543x SoC GPU thermal
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-gpu_thermal: gpu_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <500>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     1>;
-
-	trips {
-		gpu_crit: gpu_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
deleted file mode 100644
index 3851120857d79..0000000000000
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/
- */
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "omap5-board-common.dtsi"
-
-/ {
-	model = "IGEPv5";
-	compatible = "isee,omap5-igep0050", "ti,omap5";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0 0x7f000000>;	/* 2032 MB */
-	};
-
-	aliases {
-		ethernet = &ethernet;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led@1 {
-			label = "board:green:usr0";
-			gpios = <&tca6416 1 0>;
-			default-state = "off";
-		};
-		led@2 {
-			label = "board:red:usr1";
-			gpios = <&tca6416 2 0>;
-			default-state = "off";
-		};
-		led@3 {
-			label = "board:blue:usr1";
-			gpios = <&tca6416 3 0>;
-			default-state = "off";
-		};
-	};
-};
-
-&hdmi {
-	vdda-supply = <&ldo7_reg>;
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	tca6416: tca6416@21 {
-		compatible = "ti,tca6416";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-/* LDO4 is VPP1 - ball AD9 */
-&ldo4_reg {
-	regulator-min-microvolt = <2000000>;
-	regulator-max-microvolt = <2000000>;
-};
-
-/*
- * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33,
- * VDDA_HDMI - ball AN25
- */
-&ldo7_reg {
-	status = "okay";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&omap5_pmx_core {
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* i2c4_scl */
-			OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	power_button_pin: pinctrl_power_button_pin {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x086, PIN_INPUT | MUX_MODE6)	/* gpio4_118 */
-		>;
-	};
-};
-
-&tpd12s015 {
-	gpios = <&tca6416 11 0>,	/* TCA6416 P01, CT_CP_HDP */
-		<&tca6416 12 0>,	/* TCA6416 P00, LS_OE*/
-		<&gpio7 1 0>,		/* 193, HPD */
-		<&gpio7 2 0>,		/* 194, SCL */
-		<&gpio7 3 0>;		/* 195, SDA */
-};
-
-&twl6040 {
-	ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>;  /* gpio line 144 */
-};
-
-&twl6040_pins {
-	pinctrl-single,pins = <
-		OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_144 */
-		OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6)	/* perslimbus2_clock.gpio5_145 */
-	>;
-};
-
-&usbhsehci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hub@2 {
-		compatible = "usb424,3503";
-		reg = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethernet: ethernet@3 {
-			compatible = "usb424,7500";
-			reg = <3>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi
deleted file mode 100644
index a03bca5a35844..0000000000000
--- a/arch/arm/boot/dts/omap5-l4-abe.dtsi
+++ /dev/null
@@ -1,456 +0,0 @@
-&l4_abe {						/* 0x40100000 */
-	compatible = "ti,omap5-l4-abe", "simple-pm-bus";
-	reg = <0x40100000 0x400>,
-	      <0x40100400 0x400>;
-	reg-names = "la", "ap";
-	power-domains = <&prm_abe>;
-	/* OMAP5_L4_ABE_CLKCTRL is read-only */
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x40100000 0x100000>,	/* segment 0 */
-		 <0x49000000 0x49000000 0x100000>;
-	segment@0 {					/* 0x40100000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges =
-			 /* CPU to L4 ABE mapping */
-			 <0x00000000 0x00000000 0x000400>,	/* ap 0 */
-			 <0x00000400 0x00000400 0x000400>,	/* ap 1 */
-			 <0x00022000 0x00022000 0x001000>,	/* ap 2 */
-			 <0x00023000 0x00023000 0x001000>,	/* ap 3 */
-			 <0x00024000 0x00024000 0x001000>,	/* ap 4 */
-			 <0x00025000 0x00025000 0x001000>,	/* ap 5 */
-			 <0x00026000 0x00026000 0x001000>,	/* ap 6 */
-			 <0x00027000 0x00027000 0x001000>,	/* ap 7 */
-			 <0x00028000 0x00028000 0x001000>,	/* ap 8 */
-			 <0x00029000 0x00029000 0x001000>,	/* ap 9 */
-			 <0x0002a000 0x0002a000 0x001000>,	/* ap 10 */
-			 <0x0002b000 0x0002b000 0x001000>,	/* ap 11 */
-			 <0x0002e000 0x0002e000 0x001000>,	/* ap 12 */
-			 <0x0002f000 0x0002f000 0x001000>,	/* ap 13 */
-			 <0x00030000 0x00030000 0x001000>,	/* ap 14 */
-			 <0x00031000 0x00031000 0x001000>,	/* ap 15 */
-			 <0x00032000 0x00032000 0x001000>,	/* ap 16 */
-			 <0x00033000 0x00033000 0x001000>,	/* ap 17 */
-			 <0x00038000 0x00038000 0x001000>,	/* ap 18 */
-			 <0x00039000 0x00039000 0x001000>,	/* ap 19 */
-			 <0x0003a000 0x0003a000 0x001000>,	/* ap 20 */
-			 <0x0003b000 0x0003b000 0x001000>,	/* ap 21 */
-			 <0x0003c000 0x0003c000 0x001000>,	/* ap 22 */
-			 <0x0003d000 0x0003d000 0x001000>,	/* ap 23 */
-			 <0x0003e000 0x0003e000 0x001000>,	/* ap 24 */
-			 <0x0003f000 0x0003f000 0x001000>,	/* ap 25 */
-			 <0x00080000 0x00080000 0x010000>,	/* ap 26 */
-			 <0x00080000 0x00080000 0x001000>,	/* ap 27 */
-			 <0x000a0000 0x000a0000 0x010000>,	/* ap 28 */
-			 <0x000a0000 0x000a0000 0x001000>,	/* ap 29 */
-			 <0x000c0000 0x000c0000 0x010000>,	/* ap 30 */
-			 <0x000c0000 0x000c0000 0x001000>,	/* ap 31 */
-			 <0x000f1000 0x000f1000 0x001000>,	/* ap 32 */
-			 <0x000f2000 0x000f2000 0x001000>,	/* ap 33 */
-
-			 /* L3 to L4 ABE mapping */
-			 <0x49000000 0x49000000 0x000400>,	/* ap 0 */
-			 <0x49000400 0x49000400 0x000400>,	/* ap 1 */
-			 <0x49022000 0x49022000 0x001000>,	/* ap 2 */
-			 <0x49023000 0x49023000 0x001000>,	/* ap 3 */
-			 <0x49024000 0x49024000 0x001000>,	/* ap 4 */
-			 <0x49025000 0x49025000 0x001000>,	/* ap 5 */
-			 <0x49026000 0x49026000 0x001000>,	/* ap 6 */
-			 <0x49027000 0x49027000 0x001000>,	/* ap 7 */
-			 <0x49028000 0x49028000 0x001000>,	/* ap 8 */
-			 <0x49029000 0x49029000 0x001000>,	/* ap 9 */
-			 <0x4902a000 0x4902a000 0x001000>,	/* ap 10 */
-			 <0x4902b000 0x4902b000 0x001000>,	/* ap 11 */
-			 <0x4902e000 0x4902e000 0x001000>,	/* ap 12 */
-			 <0x4902f000 0x4902f000 0x001000>,	/* ap 13 */
-			 <0x49030000 0x49030000 0x001000>,	/* ap 14 */
-			 <0x49031000 0x49031000 0x001000>,	/* ap 15 */
-			 <0x49032000 0x49032000 0x001000>,	/* ap 16 */
-			 <0x49033000 0x49033000 0x001000>,	/* ap 17 */
-			 <0x49038000 0x49038000 0x001000>,	/* ap 18 */
-			 <0x49039000 0x49039000 0x001000>,	/* ap 19 */
-			 <0x4903a000 0x4903a000 0x001000>,	/* ap 20 */
-			 <0x4903b000 0x4903b000 0x001000>,	/* ap 21 */
-			 <0x4903c000 0x4903c000 0x001000>,	/* ap 22 */
-			 <0x4903d000 0x4903d000 0x001000>,	/* ap 23 */
-			 <0x4903e000 0x4903e000 0x001000>,	/* ap 24 */
-			 <0x4903f000 0x4903f000 0x001000>,	/* ap 25 */
-			 <0x49080000 0x49080000 0x010000>,	/* ap 26 */
-			 <0x49080000 0x49080000 0x001000>,	/* ap 27 */
-			 <0x490a0000 0x490a0000 0x010000>,	/* ap 28 */
-			 <0x490a0000 0x490a0000 0x001000>,	/* ap 29 */
-			 <0x490c0000 0x490c0000 0x010000>,	/* ap 30 */
-			 <0x490c0000 0x490c0000 0x001000>,	/* ap 31 */
-			 <0x490f1000 0x490f1000 0x001000>,	/* ap 32 */
-			 <0x490f2000 0x490f2000 0x001000>;	/* ap 33 */
-
-		target-module@22000 {			/* 0x40122000, ap 2 02.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x2208c 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP5_MCBSP1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x22000 0x1000>,
-				 <0x49022000 0x49022000 0x1000>;
-
-			mcbsp1: mcbsp@0 {
-				compatible = "ti,omap4-mcbsp";
-				reg = <0x0 0xff>, /* MPU private access */
-				      <0x49022000 0xff>; /* L3 Interconnect */
-				reg-names = "mpu", "dma";
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "common";
-				ti,buffer-size = <128>;
-				dmas = <&sdma 33>,
-				       <&sdma 34>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-		};
-
-		target-module@24000 {			/* 0x40124000, ap 4 04.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x2408c 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP5_MCBSP2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x24000 0x1000>,
-				 <0x49024000 0x49024000 0x1000>;
-
-			mcbsp2: mcbsp@0 {
-				compatible = "ti,omap4-mcbsp";
-				reg = <0x0 0xff>, /* MPU private access */
-				      <0x49024000 0xff>; /* L3 Interconnect */
-				reg-names = "mpu", "dma";
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "common";
-				ti,buffer-size = <128>;
-				dmas = <&sdma 17>,
-				       <&sdma 18>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-		};
-
-		target-module@26000 {			/* 0x40126000, ap 6 06.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x2608c 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP5_MCBSP3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x26000 0x1000>,
-				 <0x49026000 0x49026000 0x1000>;
-
-			mcbsp3: mcbsp@0 {
-				compatible = "ti,omap4-mcbsp";
-				reg = <0x0 0xff>, /* MPU private access */
-				      <0x49026000 0xff>; /* L3 Interconnect */
-				reg-names = "mpu", "dma";
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "common";
-				ti,buffer-size = <128>;
-				dmas = <&sdma 19>,
-				       <&sdma 20>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-		};
-
-		target-module@28000 {			/* 0x40128000, ap 8 08.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x28000 0x1000>,
-				 <0x49028000 0x49028000 0x1000>;
-		};
-
-		target-module@2a000 {			/* 0x4012a000, ap 10 0a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2a000 0x1000>,
-				 <0x4902a000 0x4902a000 0x1000>;
-		};
-
-		target-module@2e000 {			/* 0x4012e000, ap 12 0c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x2e000 0x4>,
-			      <0x2e010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP5_DMIC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2e000 0x1000>,
-				 <0x4902e000 0x4902e000 0x1000>;
-
-			dmic: dmic@0 {
-				compatible = "ti,omap4-dmic";
-				reg = <0x0 0x7f>, /* MPU private access */
-				      <0x4902e000 0x7f>; /* L3 Interconnect */
-				reg-names = "mpu", "dma";
-				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 67>;
-				dma-names = "up_link";
-				status = "disabled";
-			};
-		};
-
-		target-module@30000 {			/* 0x40130000, ap 14 0e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x30000 0x1000>,
-				 <0x49030000 0x49030000 0x1000>;
-		};
-
-		mcpdm_module: target-module@32000 {	/* 0x40132000, ap 16 10.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x32000 0x4>,
-			      <0x32010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP5_MCPDM_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x32000 0x1000>,
-				 <0x49032000 0x49032000 0x1000>;
-
-			/* Must be only enabled for boards with pdmclk wired */
-			status = "disabled";
-
-			mcpdm: mcpdm@0 {
-				compatible = "ti,omap4-mcpdm";
-				reg = <0x0 0x7f>, /* MPU private access */
-				      <0x49032000 0x7f>; /* L3 Interconnect */
-				reg-names = "mpu", "dma";
-				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 65>,
-				       <&sdma 66>;
-				dma-names = "up_link", "dn_link";
-			};
-		};
-
-		target-module@38000 {			/* 0x40138000, ap 18 12.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x38000 0x4>,
-			      <0x38010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x38000 0x1000>,
-				 <0x49038000 0x49038000 0x1000>;
-
-			timer5: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>,
-				      <0x49038000 0x80>;
-				clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 24>,
-					 <&dss_syc_gfclk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-dsp;
-				ti,timer-pwm;
-			};
-		};
-
-		target-module@3a000 {			/* 0x4013a000, ap 20 14.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x3a000 0x4>,
-			      <0x3a010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3a000 0x1000>,
-				 <0x4903a000 0x4903a000 0x1000>;
-
-			timer6: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>,
-				      <0x4903a000 0x80>;
-				clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 24>,
-					 <&dss_syc_gfclk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-dsp;
-				ti,timer-pwm;
-			};
-		};
-
-		target-module@3c000 {			/* 0x4013c000, ap 22 16.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x3c000 0x4>,
-			      <0x3c010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3c000 0x1000>,
-				 <0x4903c000 0x4903c000 0x1000>;
-
-			timer7: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>,
-				      <0x4903c000 0x80>;
-				clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 24>,
-					 <&dss_syc_gfclk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-dsp;
-			};
-		};
-
-		target-module@3e000 {			/* 0x4013e000, ap 24 18.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x3e000 0x4>,
-			      <0x3e010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3e000 0x1000>,
-				 <0x4903e000 0x4903e000 0x1000>;
-
-			timer8: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>,
-				      <0x4903e000 0x80>;
-				clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 24>,
-					 <&dss_syc_gfclk_div>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-dsp;
-				ti,timer-pwm;
-			};
-		};
-
-		target-module@80000 {			/* 0x40180000, ap 26 1a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x80000 0x10000>,
-				 <0x49080000 0x49080000 0x10000>;
-		};
-
-		target-module@a0000 {			/* 0x401a0000, ap 28 1c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa0000 0x10000>,
-				 <0x490a0000 0x490a0000 0x10000>;
-		};
-
-		target-module@c0000 {			/* 0x401c0000, ap 30 1e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc0000 0x10000>,
-				 <0x490c0000 0x490c0000 0x10000>;
-		};
-
-		target-module@f1000 {			/* 0x401f1000, ap 32 20.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xf1000 0x4>,
-			      <0xf1010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
-			clocks = <&abe_clkctrl OMAP5_AESS_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xf1000 0x1000>,
-				 <0x490f1000 0x490f1000 0x1000>;
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
deleted file mode 100644
index 3b505fe415ed9..0000000000000
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ /dev/null
@@ -1,2502 +0,0 @@
-&l4_cfg {						/* 0x4a000000 */
-	compatible = "ti,omap5-l4-cfg", "simple-pm-bus";
-	power-domains = <&prm_core>;
-	clocks = <&l4cfg_clkctrl OMAP5_L4_CFG_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x4a000000 0x800>,
-	      <0x4a000800 0x800>,
-	      <0x4a001000 0x1000>;
-	reg-names = "ap", "la", "ia0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x4a000000 0x080000>,	/* segment 0 */
-		 <0x00080000 0x4a080000 0x080000>,	/* segment 1 */
-		 <0x00100000 0x4a100000 0x080000>,	/* segment 2 */
-		 <0x00180000 0x4a180000 0x080000>,	/* segment 3 */
-		 <0x00200000 0x4a200000 0x080000>,	/* segment 4 */
-		 <0x00280000 0x4a280000 0x080000>,	/* segment 5 */
-		 <0x00300000 0x4a300000 0x080000>;	/* segment 6 */
-
-	segment@0 {					/* 0x4a000000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
-			 <0x00002000 0x00002000 0x001000>,	/* ap 3 */
-			 <0x00003000 0x00003000 0x001000>,	/* ap 4 */
-			 <0x00004000 0x00004000 0x001000>,	/* ap 5 */
-			 <0x00005000 0x00005000 0x001000>,	/* ap 6 */
-			 <0x00056000 0x00056000 0x001000>,	/* ap 7 */
-			 <0x00057000 0x00057000 0x001000>,	/* ap 8 */
-			 <0x0005c000 0x0005c000 0x001000>,	/* ap 9 */
-			 <0x00058000 0x00058000 0x001000>,	/* ap 10 */
-			 <0x00062000 0x00062000 0x001000>,	/* ap 11 */
-			 <0x00063000 0x00063000 0x001000>,	/* ap 12 */
-			 <0x00008000 0x00008000 0x002000>,	/* ap 21 */
-			 <0x0000a000 0x0000a000 0x001000>,	/* ap 22 */
-			 <0x00066000 0x00066000 0x001000>,	/* ap 23 */
-			 <0x00067000 0x00067000 0x001000>,	/* ap 24 */
-			 <0x0005e000 0x0005e000 0x002000>,	/* ap 69 */
-			 <0x00060000 0x00060000 0x001000>,	/* ap 70 */
-			 <0x00064000 0x00064000 0x001000>,	/* ap 71 */
-			 <0x00065000 0x00065000 0x001000>,	/* ap 72 */
-			 <0x0005a000 0x0005a000 0x001000>,	/* ap 77 */
-			 <0x0005b000 0x0005b000 0x001000>,	/* ap 78 */
-			 <0x00070000 0x00070000 0x004000>,	/* ap 79 */
-			 <0x00074000 0x00074000 0x001000>,	/* ap 80 */
-			 <0x00075000 0x00075000 0x001000>,	/* ap 81 */
-			 <0x00076000 0x00076000 0x001000>,	/* ap 82 */
-			 <0x00020000 0x00020000 0x020000>,	/* ap 109 */
-			 <0x00040000 0x00040000 0x001000>,	/* ap 110 */
-			 <0x00059000 0x00059000 0x001000>;	/* ap 111 */
-
-		target-module@2000 {			/* 0x4a002000, ap 3 44.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x2000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2000 0x1000>;
-
-			scm_core: scm@0 {
-				compatible = "ti,omap5-scm-core", "simple-bus";
-				reg = <0x0 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x800>;
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon";
-					reg = <0x0 0x800>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-				};
-			};
-
-			scm_padconf_core: scm@800 {
-				compatible = "ti,omap5-scm-padconf-core",
-					     "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x800 0x800>;
-
-				omap5_pmx_core: pinmux@40 {
-					compatible = "ti,omap5-padconf",
-						     "pinctrl-single";
-					reg = <0x40 0x01b6>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					#interrupt-cells = <1>;
-					interrupt-controller;
-					pinctrl-single,register-width = <16>;
-					pinctrl-single,function-mask = <0x7fff>;
-				};
-
-				omap5_padconf_global: omap5_padconf_global@5a0 {
-					compatible = "syscon",
-						     "simple-bus";
-					reg = <0x5a0 0xec>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x5a0 0xec>;
-
-					pbias_regulator: pbias_regulator@60 {
-						compatible = "ti,pbias-omap5", "ti,pbias-omap";
-						reg = <0x60 0x4>;
-						syscon = <&omap5_padconf_global>;
-						pbias_mmc_reg: pbias_mmc_omap5 {
-							regulator-name = "pbias_mmc_omap5";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-						};
-					};
-				};
-			};
-		};
-
-		target-module@4000 {			/* 0x4a004000, ap 5 5c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x4000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-
-			cm_core_aon: cm_core_aon@0 {
-				compatible = "ti,omap5-cm-core-aon",
-					     "simple-bus";
-				reg = <0x0 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x1000>;
-
-				cm_core_aon_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				cm_core_aon_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		target-module@8000 {			/* 0x4a008000, ap 21 4c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x8000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8000 0x2000>;
-
-			cm_core: cm_core@0 {
-				compatible = "ti,omap5-cm-core", "simple-bus";
-				reg = <0x0 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x2000>;
-
-				cm_core_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				cm_core_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		target-module@20000 {			/* 0x4a020000, ap 109 08.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x20000 0x4>,
-			      <0x20010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x20000 0x20000>;
-
-			usb3: omap_dwc3@0 {
-				compatible = "ti,dwc3";
-				reg = <0x0 0x10000>;
-				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				utmi-mode = <2>;
-				ranges = <0 0 0x20000>;
-				dwc3: usb@10000 {
-					compatible = "snps,dwc3";
-					reg = <0x10000 0x10000>;
-					interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "peripheral",
-							  "host",
-							  "otg";
-					phys = <&usb2_phy>, <&usb3_phy>;
-					phy-names = "usb2-phy", "usb3-phy";
-					dr_mode = "peripheral";
-				};
-			};
-		};
-
-		target-module@56000 {			/* 0x4a056000, ap 7 02.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x56000 0x4>,
-			      <0x5602c 0x4>,
-			      <0x56028 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, dma_clkdm */
-			clocks = <&dma_clkctrl OMAP5_DMA_SYSTEM_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x56000 0x1000>;
-
-			sdma: dma-controller@0 {
-				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-				#dma-cells = <1>;
-				dma-channels = <32>;
-				dma-requests = <127>;
-			};
-		};
-
-		target-module@58000 {			/* 0x4a058000, ap 10 06.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00058000 0x00001000>,
-				 <0x00001000 0x00059000 0x00001000>,
-				 <0x00002000 0x0005a000 0x00001000>,
-				 <0x00003000 0x0005b000 0x00001000>;
-		};
-
-		target-module@5e000 {			/* 0x4a05e000, ap 69 2a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5e000 0x2000>;
-		};
-
-		target-module@62000 {			/* 0x4a062000, ap 11 0e.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x62000 0x4>,
-			      <0x62010 0x4>,
-			      <0x62014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl OMAP5_USB_TLL_HS_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x62000 0x1000>;
-
-			usbhstll: usbhstll@0 {
-				compatible = "ti,usbhs-tll";
-				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@64000 {			/* 0x4a064000, ap 71 1e.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x64000 0x4>,
-			      <0x64010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl OMAP5_USB_HOST_HS_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x64000 0x1000>;
-
-			usbhshost: usbhshost@0 {
-				compatible = "ti,usbhs-host";
-				reg = <0x0 0x800>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x1000>;
-				clocks = <&l3init_60m_fclk>,
-					 <&xclk60mhsp1_ck>,
-					 <&xclk60mhsp2_ck>;
-				clock-names = "refclk_60m_int",
-					      "refclk_60m_ext_p1",
-					      "refclk_60m_ext_p2";
-
-				usbhsohci: ohci@800 {
-					compatible = "ti,ohci-omap3";
-					reg = <0x800 0x400>;
-					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-					remote-wakeup-connected;
-				};
-
-				usbhsehci: ehci@c00 {
-					compatible = "ti,ehci-omap";
-					reg = <0xc00 0x400>;
-					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-		};
-
-		target-module@66000 {			/* 0x4a066000, ap 23 0a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x66000 0x4>,
-			      <0x66010 0x4>,
-			      <0x66014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */
-			clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
-			clock-names = "fck";
-			resets = <&prm_dsp 1>;
-			reset-names = "rstctrl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x66000 0x1000>;
-
-			mmu_dsp: mmu@0 {
-				compatible = "ti,omap4-iommu";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				#iommu-cells = <0>;
-			};
-		};
-
-		target-module@70000 {			/* 0x4a070000, ap 79 2e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x70000 0x4000>;
-		};
-
-		target-module@75000 {			/* 0x4a075000, ap 81 32.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x75000 0x1000>;
-		};
-	};
-
-	segment@80000 {					/* 0x4a080000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00059000 0x000d9000 0x001000>,	/* ap 13 */
-			 <0x0005a000 0x000da000 0x001000>,	/* ap 14 */
-			 <0x0005b000 0x000db000 0x001000>,	/* ap 15 */
-			 <0x0005c000 0x000dc000 0x001000>,	/* ap 16 */
-			 <0x0005d000 0x000dd000 0x001000>,	/* ap 17 */
-			 <0x0005e000 0x000de000 0x001000>,	/* ap 18 */
-			 <0x00060000 0x000e0000 0x001000>,	/* ap 19 */
-			 <0x00061000 0x000e1000 0x001000>,	/* ap 20 */
-			 <0x00074000 0x000f4000 0x001000>,	/* ap 25 */
-			 <0x00075000 0x000f5000 0x001000>,	/* ap 26 */
-			 <0x00076000 0x000f6000 0x001000>,	/* ap 27 */
-			 <0x00077000 0x000f7000 0x001000>,	/* ap 28 */
-			 <0x00036000 0x000b6000 0x001000>,	/* ap 65 */
-			 <0x00037000 0x000b7000 0x001000>,	/* ap 66 */
-			 <0x0004d000 0x000cd000 0x001000>,	/* ap 67 */
-			 <0x0004e000 0x000ce000 0x001000>,	/* ap 68 */
-			 <0x00000000 0x00080000 0x004000>,	/* ap 83 */
-			 <0x00004000 0x00084000 0x001000>,	/* ap 84 */
-			 <0x00005000 0x00085000 0x001000>,	/* ap 85 */
-			 <0x00006000 0x00086000 0x001000>,	/* ap 86 */
-			 <0x00007000 0x00087000 0x001000>,	/* ap 87 */
-			 <0x00008000 0x00088000 0x001000>,	/* ap 88 */
-			 <0x00010000 0x00090000 0x004000>,	/* ap 89 */
-			 <0x00014000 0x00094000 0x001000>,	/* ap 90 */
-			 <0x00015000 0x00095000 0x001000>,	/* ap 91 */
-			 <0x00016000 0x00096000 0x001000>,	/* ap 92 */
-			 <0x00017000 0x00097000 0x001000>,	/* ap 93 */
-			 <0x00018000 0x00098000 0x001000>,	/* ap 94 */
-			 <0x00020000 0x000a0000 0x004000>,	/* ap 95 */
-			 <0x00024000 0x000a4000 0x001000>,	/* ap 96 */
-			 <0x00025000 0x000a5000 0x001000>,	/* ap 97 */
-			 <0x00026000 0x000a6000 0x001000>,	/* ap 98 */
-			 <0x00027000 0x000a7000 0x001000>,	/* ap 99 */
-			 <0x00028000 0x000a8000 0x001000>;	/* ap 100 */
-
-		target-module@0 {			/* 0x4a080000, ap 83 28.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x0 0x4>,
-			      <0x10 0x4>,
-			      <0x14 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl OMAP5_OCP2SCP1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00000000 0x00004000>,
-				 <0x00004000 0x00004000 0x00001000>,
-				 <0x00005000 0x00005000 0x00001000>,
-				 <0x00006000 0x00006000 0x00001000>,
-				 <0x00007000 0x00007000 0x00001000>;
-
-			ocp2scp@0 {
-				compatible = "ti,omap-ocp2scp";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0 0x20>;
-			};
-
-			usb2_phy: usb2phy@4000 {
-				compatible = "ti,omap-usb2";
-				reg = <0x4000 0x7c>;
-				syscon-phy-power = <&scm_conf 0x300>;
-				clocks = <&usb_phy_cm_clk32k>,
-				<&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
-				clock-names = "wkupclk", "refclk";
-				#phy-cells = <0>;
-			};
-
-			usb3_phy: usb3phy@4400 {
-				compatible = "ti,omap-usb3";
-				reg = <0x4400 0x80>,
-				<0x4800 0x64>,
-				<0x4c00 0x40>;
-				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				syscon-phy-power = <&scm_conf 0x370>;
-				clocks = <&usb_phy_cm_clk32k>,
-				<&sys_clkin>,
-				<&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
-				clock-names = "wkupclk",
-				"sysclk",
-				"refclk";
-				#phy-cells = <0>;
-			};
-		};
-
-		target-module@10000 {			/* 0x4a090000, ap 89 36.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x10000 0x4>,
-			      <0x10010 0x4>,
-			      <0x10014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl OMAP5_OCP2SCP3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00010000 0x00004000>,
-				 <0x00004000 0x00014000 0x00001000>,
-				 <0x00005000 0x00015000 0x00001000>,
-				 <0x00006000 0x00016000 0x00001000>,
-				 <0x00007000 0x00017000 0x00001000>;
-
-				ocp2scp@0 {
-					compatible = "ti,omap-ocp2scp";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					reg = <0x0 0x20>;
-				};
-
-				sata_phy: phy@6000 {
-					compatible = "ti,phy-pipe3-sata";
-					reg = <0x6000 0x80>, /* phy_rx */
-					      <0x6400 0x64>, /* phy_tx */
-					      <0x6800 0x40>; /* pll_ctrl */
-					reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-					syscon-phy-power = <&scm_conf 0x374>;
-					clocks = <&sys_clkin>,
-						 <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
-					clock-names = "sysclk", "refclk";
-					#phy-cells = <0>;
-				};
-		};
-
-		target-module@20000 {			/* 0x4a0a0000, ap 95 50.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00020000 0x00004000>,
-				 <0x00004000 0x00024000 0x00001000>,
-				 <0x00005000 0x00025000 0x00001000>,
-				 <0x00006000 0x00026000 0x00001000>,
-				 <0x00007000 0x00027000 0x00001000>;
-		};
-
-		target-module@36000 {			/* 0x4a0b6000, ap 65 6c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x36000 0x1000>;
-		};
-
-		target-module@4d000 {			/* 0x4a0cd000, ap 67 64.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4d000 0x1000>;
-		};
-
-		target-module@59000 {			/* 0x4a0d9000, ap 13 20.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x59000 0x1000>;
-		};
-
-		target-module@5b000 {			/* 0x4a0db000, ap 15 10.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5b000 0x1000>;
-		};
-
-		target-module@5d000 {			/* 0x4a0dd000, ap 17 18.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5d000 0x1000>;
-		};
-
-		target-module@60000 {			/* 0x4a0e0000, ap 19 54.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x60000 0x1000>;
-		};
-
-		target-module@74000 {			/* 0x4a0f4000, ap 25 04.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x74000 0x4>,
-			      <0x74010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl OMAP5_MAILBOX_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x74000 0x1000>;
-
-			mailbox: mailbox@0 {
-				compatible = "ti,omap4-mailbox";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <1>;
-				ti,mbox-num-users = <3>;
-				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox-ipu {
-					ti,mbox-tx = <0 0 0>;
-					ti,mbox-rx = <1 0 0>;
-				};
-				mbox_dsp: mbox-dsp {
-					ti,mbox-tx = <3 0 0>;
-					ti,mbox-rx = <2 0 0>;
-				};
-			};
-		};
-
-		target-module@76000 {			/* 0x4a0f6000, ap 27 0c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x76000 0x4>,
-			      <0x76010 0x4>,
-			      <0x76014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */
-			clocks = <&l4cfg_clkctrl OMAP5_SPINLOCK_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x76000 0x1000>;
-
-			hwspinlock: spinlock@0 {
-				compatible = "ti,omap4-hwspinlock";
-				reg = <0x0 0x1000>;
-				#hwlock-cells = <1>;
-			};
-		};
-	};
-
-	segment@100000 {					/* 0x4a100000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00002000 0x00102000 0x001000>,	/* ap 59 */
-			 <0x00003000 0x00103000 0x001000>,	/* ap 60 */
-			 <0x00008000 0x00108000 0x001000>,	/* ap 61 */
-			 <0x00009000 0x00109000 0x001000>,	/* ap 62 */
-			 <0x0000a000 0x0010a000 0x001000>,	/* ap 63 */
-			 <0x0000b000 0x0010b000 0x001000>,	/* ap 64 */
-			 <0x00040000 0x00140000 0x010000>,	/* ap 101 */
-			 <0x00050000 0x00150000 0x001000>;	/* ap 102 */
-
-		target-module@2000 {			/* 0x4a102000, ap 59 2c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2000 0x1000>;
-		};
-
-		target-module@8000 {			/* 0x4a108000, ap 61 26.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8000 0x1000>;
-		};
-
-		target-module@a000 {			/* 0x4a10a000, ap 63 22.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa000 0x1000>;
-		};
-
-		target-module@40000 {			/* 0x4a140000, ap 101 16.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x400fc 4>,
-			      <0x41100 4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			power-domains = <&prm_l3init>;
-			clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 0>;
-			clock-names = "fck";
-			#size-cells = <1>;
-			#address-cells = <1>;
-			ranges = <0x0 0x40000 0x10000>;
-
-			sata: sata@0 {
-				compatible = "snps,dwc-ahci";
-				reg = <0 0x1100>, <0x1100 0x8>;
-				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&sata_phy>;
-				phy-names = "sata-phy";
-				clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
-				ports-implemented = <0x1>;
-			};
-		};
-	};
-
-	segment@180000 {					/* 0x4a180000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	segment@200000 {					/* 0x4a200000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0001e000 0x0021e000 0x001000>,	/* ap 29 */
-			 <0x0001f000 0x0021f000 0x001000>,	/* ap 30 */
-			 <0x0000a000 0x0020a000 0x001000>,	/* ap 31 */
-			 <0x0000b000 0x0020b000 0x001000>,	/* ap 32 */
-			 <0x00006000 0x00206000 0x001000>,	/* ap 33 */
-			 <0x00007000 0x00207000 0x001000>,	/* ap 34 */
-			 <0x00004000 0x00204000 0x001000>,	/* ap 35 */
-			 <0x00005000 0x00205000 0x001000>,	/* ap 36 */
-			 <0x00012000 0x00212000 0x001000>,	/* ap 37 */
-			 <0x00013000 0x00213000 0x001000>,	/* ap 38 */
-			 <0x0000c000 0x0020c000 0x001000>,	/* ap 39 */
-			 <0x0000d000 0x0020d000 0x001000>,	/* ap 40 */
-			 <0x00010000 0x00210000 0x001000>,	/* ap 41 */
-			 <0x00011000 0x00211000 0x001000>,	/* ap 42 */
-			 <0x00016000 0x00216000 0x001000>,	/* ap 43 */
-			 <0x00017000 0x00217000 0x001000>,	/* ap 44 */
-			 <0x00014000 0x00214000 0x001000>,	/* ap 45 */
-			 <0x00015000 0x00215000 0x001000>,	/* ap 46 */
-			 <0x00018000 0x00218000 0x001000>,	/* ap 47 */
-			 <0x00019000 0x00219000 0x001000>,	/* ap 48 */
-			 <0x00020000 0x00220000 0x001000>,	/* ap 49 */
-			 <0x00021000 0x00221000 0x001000>,	/* ap 50 */
-			 <0x00026000 0x00226000 0x001000>,	/* ap 51 */
-			 <0x00027000 0x00227000 0x001000>,	/* ap 52 */
-			 <0x00028000 0x00228000 0x001000>,	/* ap 53 */
-			 <0x00029000 0x00229000 0x001000>,	/* ap 54 */
-			 <0x0002a000 0x0022a000 0x001000>,	/* ap 55 */
-			 <0x0002b000 0x0022b000 0x001000>,	/* ap 56 */
-			 <0x0001c000 0x0021c000 0x001000>,	/* ap 57 */
-			 <0x0001d000 0x0021d000 0x001000>,	/* ap 58 */
-			 <0x0001a000 0x0021a000 0x001000>,	/* ap 73 */
-			 <0x0001b000 0x0021b000 0x001000>,	/* ap 74 */
-			 <0x00024000 0x00224000 0x001000>,	/* ap 75 */
-			 <0x00025000 0x00225000 0x001000>,	/* ap 76 */
-			 <0x00002000 0x00202000 0x001000>,	/* ap 103 */
-			 <0x00003000 0x00203000 0x001000>,	/* ap 104 */
-			 <0x00008000 0x00208000 0x001000>,	/* ap 105 */
-			 <0x00009000 0x00209000 0x001000>,	/* ap 106 */
-			 <0x00022000 0x00222000 0x001000>,	/* ap 107 */
-			 <0x00023000 0x00223000 0x001000>;	/* ap 108 */
-
-		target-module@2000 {			/* 0x4a202000, ap 103 3c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2000 0x1000>;
-		};
-
-		target-module@4000 {			/* 0x4a204000, ap 35 46.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-		};
-
-		target-module@6000 {			/* 0x4a206000, ap 33 4e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6000 0x1000>;
-		};
-
-		target-module@8000 {			/* 0x4a208000, ap 105 34.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8000 0x1000>;
-		};
-
-		target-module@a000 {			/* 0x4a20a000, ap 31 30.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa000 0x1000>;
-		};
-
-		target-module@c000 {			/* 0x4a20c000, ap 39 14.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc000 0x1000>;
-		};
-
-		target-module@10000 {			/* 0x4a210000, ap 41 56.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x10000 0x1000>;
-		};
-
-		target-module@12000 {			/* 0x4a212000, ap 37 52.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x12000 0x1000>;
-		};
-
-		target-module@14000 {			/* 0x4a214000, ap 45 1c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x14000 0x1000>;
-		};
-
-		target-module@16000 {			/* 0x4a216000, ap 43 42.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x16000 0x1000>;
-		};
-
-		target-module@18000 {			/* 0x4a218000, ap 47 1a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x18000 0x1000>;
-		};
-
-		target-module@1a000 {			/* 0x4a21a000, ap 73 3e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1a000 0x1000>;
-		};
-
-		target-module@1c000 {			/* 0x4a21c000, ap 57 40.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1c000 0x1000>;
-		};
-
-		target-module@1e000 {			/* 0x4a21e000, ap 29 12.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x1e000 0x1000>;
-		};
-
-		target-module@20000 {			/* 0x4a220000, ap 49 4a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x20000 0x1000>;
-		};
-
-		target-module@22000 {			/* 0x4a222000, ap 107 3a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x22000 0x1000>;
-		};
-
-		target-module@24000 {			/* 0x4a224000, ap 75 48.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x24000 0x1000>;
-		};
-
-		target-module@26000 {			/* 0x4a226000, ap 51 24.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x26000 0x1000>;
-		};
-
-		target-module@28000 {			/* 0x4a228000, ap 53 38.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x28000 0x1000>;
-		};
-
-		target-module@2a000 {			/* 0x4a22a000, ap 55 5a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2a000 0x1000>;
-		};
-	};
-
-	segment@280000 {					/* 0x4a280000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	segment@300000 {					/* 0x4a300000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&l4_per {						/* 0x48000000 */
-	compatible = "ti,omap5-l4-per", "simple-pm-bus";
-	power-domains = <&prm_core>;
-	clocks = <&l4per_clkctrl OMAP5_L4_PER_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x48000000 0x800>,
-	      <0x48000800 0x800>,
-	      <0x48001000 0x400>,
-	      <0x48001400 0x400>,
-	      <0x48001800 0x400>,
-	      <0x48001c00 0x400>;
-	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x48000000 0x200000>,	/* segment 0 */
-		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
-
-	segment@0 {					/* 0x48000000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00001000 0x00001000 0x000400>,	/* ap 1 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
-			 <0x00020000 0x00020000 0x001000>,	/* ap 3 */
-			 <0x00021000 0x00021000 0x001000>,	/* ap 4 */
-			 <0x00032000 0x00032000 0x001000>,	/* ap 5 */
-			 <0x00033000 0x00033000 0x001000>,	/* ap 6 */
-			 <0x00034000 0x00034000 0x001000>,	/* ap 7 */
-			 <0x00035000 0x00035000 0x001000>,	/* ap 8 */
-			 <0x00036000 0x00036000 0x001000>,	/* ap 9 */
-			 <0x00037000 0x00037000 0x001000>,	/* ap 10 */
-			 <0x0003e000 0x0003e000 0x001000>,	/* ap 11 */
-			 <0x0003f000 0x0003f000 0x001000>,	/* ap 12 */
-			 <0x00055000 0x00055000 0x001000>,	/* ap 13 */
-			 <0x00056000 0x00056000 0x001000>,	/* ap 14 */
-			 <0x00057000 0x00057000 0x001000>,	/* ap 15 */
-			 <0x00058000 0x00058000 0x001000>,	/* ap 16 */
-			 <0x00059000 0x00059000 0x001000>,	/* ap 17 */
-			 <0x0005a000 0x0005a000 0x001000>,	/* ap 18 */
-			 <0x0005b000 0x0005b000 0x001000>,	/* ap 19 */
-			 <0x0005c000 0x0005c000 0x001000>,	/* ap 20 */
-			 <0x0005d000 0x0005d000 0x001000>,	/* ap 21 */
-			 <0x0005e000 0x0005e000 0x001000>,	/* ap 22 */
-			 <0x00060000 0x00060000 0x001000>,	/* ap 23 */
-			 <0x0006a000 0x0006a000 0x001000>,	/* ap 24 */
-			 <0x0006b000 0x0006b000 0x001000>,	/* ap 25 */
-			 <0x0006c000 0x0006c000 0x001000>,	/* ap 26 */
-			 <0x0006d000 0x0006d000 0x001000>,	/* ap 27 */
-			 <0x0006e000 0x0006e000 0x001000>,	/* ap 28 */
-			 <0x0006f000 0x0006f000 0x001000>,	/* ap 29 */
-			 <0x00070000 0x00070000 0x001000>,	/* ap 30 */
-			 <0x00071000 0x00071000 0x001000>,	/* ap 31 */
-			 <0x00072000 0x00072000 0x001000>,	/* ap 32 */
-			 <0x00073000 0x00073000 0x001000>,	/* ap 33 */
-			 <0x00061000 0x00061000 0x001000>,	/* ap 34 */
-			 <0x00053000 0x00053000 0x001000>,	/* ap 35 */
-			 <0x00054000 0x00054000 0x001000>,	/* ap 36 */
-			 <0x000b2000 0x000b2000 0x001000>,	/* ap 37 */
-			 <0x000b3000 0x000b3000 0x001000>,	/* ap 38 */
-			 <0x00078000 0x00078000 0x001000>,	/* ap 39 */
-			 <0x00079000 0x00079000 0x001000>,	/* ap 40 */
-			 <0x00086000 0x00086000 0x001000>,	/* ap 41 */
-			 <0x00087000 0x00087000 0x001000>,	/* ap 42 */
-			 <0x00088000 0x00088000 0x001000>,	/* ap 43 */
-			 <0x00089000 0x00089000 0x001000>,	/* ap 44 */
-			 <0x00051000 0x00051000 0x001000>,	/* ap 45 */
-			 <0x00052000 0x00052000 0x001000>,	/* ap 46 */
-			 <0x00098000 0x00098000 0x001000>,	/* ap 47 */
-			 <0x00099000 0x00099000 0x001000>,	/* ap 48 */
-			 <0x0009a000 0x0009a000 0x001000>,	/* ap 49 */
-			 <0x0009b000 0x0009b000 0x001000>,	/* ap 50 */
-			 <0x0009c000 0x0009c000 0x001000>,	/* ap 51 */
-			 <0x0009d000 0x0009d000 0x001000>,	/* ap 52 */
-			 <0x00068000 0x00068000 0x001000>,	/* ap 53 */
-			 <0x00069000 0x00069000 0x001000>,	/* ap 54 */
-			 <0x00090000 0x00090000 0x002000>,	/* ap 55 */
-			 <0x00092000 0x00092000 0x001000>,	/* ap 56 */
-			 <0x000a4000 0x000a4000 0x001000>,	/* ap 57 */
-			 <0x000a5000 0x000a5000 0x001000>,
-			 <0x000a6000 0x000a6000 0x001000>,	/* ap 58 */
-			 <0x000a8000 0x000a8000 0x004000>,	/* ap 59 */
-			 <0x000ac000 0x000ac000 0x001000>,	/* ap 60 */
-			 <0x000ad000 0x000ad000 0x001000>,	/* ap 61 */
-			 <0x000ae000 0x000ae000 0x001000>,	/* ap 62 */
-			 <0x00066000 0x00066000 0x001000>,	/* ap 63 */
-			 <0x00067000 0x00067000 0x001000>,	/* ap 64 */
-			 <0x000b4000 0x000b4000 0x001000>,	/* ap 65 */
-			 <0x000b5000 0x000b5000 0x001000>,	/* ap 66 */
-			 <0x000b8000 0x000b8000 0x001000>,	/* ap 67 */
-			 <0x000b9000 0x000b9000 0x001000>,	/* ap 68 */
-			 <0x000ba000 0x000ba000 0x001000>,	/* ap 69 */
-			 <0x000bb000 0x000bb000 0x001000>,	/* ap 70 */
-			 <0x000d1000 0x000d1000 0x001000>,	/* ap 71 */
-			 <0x000d2000 0x000d2000 0x001000>,	/* ap 72 */
-			 <0x000d5000 0x000d5000 0x001000>,	/* ap 73 */
-			 <0x000d6000 0x000d6000 0x001000>,	/* ap 74 */
-			 <0x000a2000 0x000a2000 0x001000>,	/* ap 75 */
-			 <0x000a3000 0x000a3000 0x001000>,	/* ap 76 */
-			 <0x00001400 0x00001400 0x000400>,	/* ap 77 */
-			 <0x00001800 0x00001800 0x000400>,	/* ap 78 */
-			 <0x00001c00 0x00001c00 0x000400>,	/* ap 79 */
-			 <0x000a5000 0x000a5000 0x001000>,	/* ap 80 */
-			 <0x0007a000 0x0007a000 0x001000>,	/* ap 81 */
-			 <0x0007b000 0x0007b000 0x001000>,	/* ap 82 */
-			 <0x0007c000 0x0007c000 0x001000>,	/* ap 83 */
-			 <0x0007d000 0x0007d000 0x001000>;	/* ap 84 */
-
-		target-module@20000 {			/* 0x48020000, ap 3 04.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x20050 0x4>,
-			      <0x20054 0x4>,
-			      <0x20058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_UART3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x20000 0x1000>;
-
-			uart3: serial@0 {
-				compatible = "ti,omap4-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-			};
-		};
-
-		target-module@32000 {			/* 0x48032000, ap 5 3e.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x32000 0x4>,
-			      <0x32010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x32000 0x1000>;
-
-			timer2: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 24>,
-					 <&sys_clkin>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@34000 {			/* 0x48034000, ap 7 46.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x34000 0x4>,
-			      <0x34010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x34000 0x1000>;
-
-			timer3: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 24>,
-					 <&sys_clkin>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@36000 {			/* 0x48036000, ap 9 4e.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x36000 0x4>,
-			      <0x36010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x36000 0x1000>;
-
-			timer4: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 24>,
-					 <&sys_clkin>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@3e000 {			/* 0x4803e000, ap 11 56.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x3e000 0x4>,
-			      <0x3e010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x3e000 0x1000>;
-
-			timer9: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 24>,
-					 <&sys_clkin>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-			};
-		};
-
-		target-module@51000 {			/* 0x48051000, ap 45 2e.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x51000 0x4>,
-			      <0x51010 0x4>,
-			      <0x51114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 0>,
-				 <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x51000 0x1000>;
-
-			gpio7: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@53000 {			/* 0x48053000, ap 35 36.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x53000 0x4>,
-			      <0x53010 0x4>,
-			      <0x53114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 0>,
-				 <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x53000 0x1000>;
-
-			gpio8: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x55000 0x4>,
-			      <0x55010 0x4>,
-			      <0x55114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 0>,
-				 <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x55000 0x1000>;
-
-			gpio2: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x57000 0x4>,
-			      <0x57010 0x4>,
-			      <0x57114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 0>,
-				 <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x57000 0x1000>;
-
-			gpio3: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@59000 {			/* 0x48059000, ap 17 16.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x59000 0x4>,
-			      <0x59010 0x4>,
-			      <0x59114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 0>,
-				 <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x59000 0x1000>;
-
-			gpio4: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@5b000 {			/* 0x4805b000, ap 19 1e.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x5b000 0x4>,
-			      <0x5b010 0x4>,
-			      <0x5b114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 0>,
-				 <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5b000 0x1000>;
-
-			gpio5: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@5d000 {			/* 0x4805d000, ap 21 26.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x5d000 0x4>,
-			      <0x5d010 0x4>,
-			      <0x5d114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 0>,
-				 <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x5d000 0x1000>;
-
-			gpio6: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@60000 {			/* 0x48060000, ap 23 24.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x60000 0x8>,
-			      <0x60010 0x8>,
-			      <0x60090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_I2C3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x60000 0x1000>;
-
-			i2c3: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		target-module@66000 {			/* 0x48066000, ap 63 4c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x66050 0x4>,
-			      <0x66054 0x4>,
-			      <0x66058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_UART5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x66000 0x1000>;
-
-			uart5: serial@0 {
-				compatible = "ti,omap4-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-			};
-		};
-
-		target-module@68000 {			/* 0x48068000, ap 53 54.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x68050 0x4>,
-			      <0x68054 0x4>,
-			      <0x68058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_UART6_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x68000 0x1000>;
-
-			uart6: serial@0 {
-				compatible = "ti,omap4-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-			};
-		};
-
-		target-module@6a000 {			/* 0x4806a000, ap 24 0a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x6a050 0x4>,
-			      <0x6a054 0x4>,
-			      <0x6a058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_UART1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6a000 0x1000>;
-
-			uart1: serial@0 {
-				compatible = "ti,omap4-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-			};
-		};
-
-		target-module@6c000 {			/* 0x4806c000, ap 26 22.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x6c050 0x4>,
-			      <0x6c054 0x4>,
-			      <0x6c058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_UART2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6c000 0x1000>;
-
-			uart2: serial@0 {
-				compatible = "ti,omap4-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-			};
-		};
-
-		target-module@6e000 {			/* 0x4806e000, ap 28 44.1 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x6e050 0x4>,
-			      <0x6e054 0x4>,
-			      <0x6e058 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_UART4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6e000 0x1000>;
-
-			uart4: serial@0 {
-				compatible = "ti,omap4-uart";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <48000000>;
-			};
-		};
-
-		target-module@70000 {			/* 0x48070000, ap 30 14.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x70000 0x8>,
-			      <0x70010 0x8>,
-			      <0x70090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_I2C1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x70000 0x1000>;
-
-			i2c1: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		target-module@72000 {			/* 0x48072000, ap 32 1c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x72000 0x8>,
-			      <0x72010 0x8>,
-			      <0x72090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_I2C2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x72000 0x1000>;
-
-			i2c2: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		target-module@78000 {			/* 0x48078000, ap 39 12.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x78000 0x1000>;
-		};
-
-		target-module@7a000 {			/* 0x4807a000, ap 81 2c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x7a000 0x8>,
-			      <0x7a010 0x8>,
-			      <0x7a090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_I2C4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x7a000 0x1000>;
-
-			i2c4: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		target-module@7c000 {			/* 0x4807c000, ap 83 34.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x7c000 0x8>,
-			      <0x7c010 0x8>,
-			      <0x7c090 0x8>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_I2C5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x7c000 0x1000>;
-
-			i2c5: i2c@0 {
-				compatible = "ti,omap4-i2c";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		target-module@86000 {			/* 0x48086000, ap 41 5e.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x86000 0x4>,
-			      <0x86010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x86000 0x1000>;
-
-			timer10: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 24>,
-					 <&sys_clkin>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-			};
-		};
-
-		target-module@88000 {			/* 0x48088000, ap 43 66.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x88000 0x4>,
-			      <0x88010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x88000 0x1000>;
-
-			timer11: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 24>,
-					 <&sys_clkin>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-pwm;
-			};
-		};
-
-		rng_target: target-module@90000 {	/* 0x48090000, ap 55 1a.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x91fe0 0x4>,
-			      <0x91fe4 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
-			clocks = <&l4sec_clkctrl OMAP5_RNG_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x90000 0x2000>;
-
-			rng: rng@0 {
-				compatible = "ti,omap4-rng";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@98000 {			/* 0x48098000, ap 47 08.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x98000 0x4>,
-			      <0x98010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_MCSPI1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x98000 0x1000>;
-
-			mcspi1: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,spi-num-cs = <4>;
-				dmas = <&sdma 35>,
-				       <&sdma 36>,
-				       <&sdma 37>,
-				       <&sdma 38>,
-				       <&sdma 39>,
-				       <&sdma 40>,
-				       <&sdma 41>,
-				       <&sdma 42>;
-				dma-names = "tx0", "rx0", "tx1", "rx1",
-					    "tx2", "rx2", "tx3", "rx3";
-			};
-		};
-
-		target-module@9a000 {			/* 0x4809a000, ap 49 10.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x9a000 0x4>,
-			      <0x9a010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_MCSPI2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x9a000 0x1000>;
-
-			mcspi2: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,spi-num-cs = <2>;
-				dmas = <&sdma 43>,
-				       <&sdma 44>,
-				       <&sdma 45>,
-				       <&sdma 46>;
-				dma-names = "tx0", "rx0", "tx1", "rx1";
-			};
-		};
-
-		target-module@9c000 {			/* 0x4809c000, ap 51 3a.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x9c000 0x4>,
-			      <0x9c010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl OMAP5_MMC1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x9c000 0x1000>;
-
-			mmc1: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				ti,dual-volt;
-				ti,needs-special-reset;
-				dmas = <&sdma 61>, <&sdma 62>;
-				dma-names = "tx", "rx";
-				pbias-supply = <&pbias_mmc_reg>;
-			};
-		};
-
-		target-module@a2000 {			/* 0x480a2000, ap 75 02.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa2000 0x1000>;
-		};
-
-		target-module@a4000 {			/* 0x480a4000, ap 57 3c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x000a4000 0x00001000>,
-				 <0x00001000 0x000a5000 0x00001000>;
-		};
-
-		des_target: target-module@a5000 {	/* 0x480a5000 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xa5030 0x4>,
-			      <0xa5034 0x4>,
-			      <0xa5038 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
-			clocks = <&l4sec_clkctrl OMAP5_DES3DES_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0xa5000 0x00001000>;
-			status = "disabled";
-
-			des: des@0 {
-				compatible = "ti,omap4-des";
-				reg = <0 0xa0>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 117>, <&sdma 116>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@a8000 {			/* 0x480a8000, ap 59 2a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa8000 0x4000>;
-		};
-
-		target-module@ad000 {			/* 0x480ad000, ap 61 20.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xad000 0x4>,
-			      <0xad010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_MMC3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xad000 0x1000>;
-
-			mmc3: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-				ti,needs-special-reset;
-				dmas = <&sdma 77>, <&sdma 78>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@b2000 {			/* 0x480b2000, ap 37 0c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb2000 0x1000>;
-		};
-
-		target-module@b4000 {			/* 0x480b4000, ap 65 42.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xb4000 0x4>,
-			      <0xb4010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl OMAP5_MMC2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb4000 0x1000>;
-
-			mmc2: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				ti,needs-special-reset;
-				dmas = <&sdma 47>, <&sdma 48>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@b8000 {			/* 0x480b8000, ap 67 32.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xb8000 0x4>,
-			      <0xb8010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_MCSPI3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xb8000 0x1000>;
-
-			mcspi3: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,spi-num-cs = <2>;
-				dmas = <&sdma 15>, <&sdma 16>;
-				dma-names = "tx0", "rx0";
-			};
-		};
-
-		target-module@ba000 {			/* 0x480ba000, ap 69 18.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xba000 0x4>,
-			      <0xba010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_MCSPI4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xba000 0x1000>;
-
-			mcspi4: spi@0 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,spi-num-cs = <1>;
-				dmas = <&sdma 70>, <&sdma 71>;
-				dma-names = "tx0", "rx0";
-			};
-		};
-
-		target-module@d1000 {			/* 0x480d1000, ap 71 28.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xd1000 0x4>,
-			      <0xd1010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_MMC4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xd1000 0x1000>;
-
-			mmc4: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				ti,needs-special-reset;
-				dmas = <&sdma 57>, <&sdma 58>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		target-module@d5000 {			/* 0x480d5000, ap 73 30.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xd5000 0x4>,
-			      <0xd5010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl OMAP5_MMC5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xd5000 0x1000>;
-
-			mmc5: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				reg = <0x0 0x400>;
-				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-				ti,needs-special-reset;
-				dmas = <&sdma 59>, <&sdma 60>;
-				dma-names = "tx", "rx";
-			};
-		};
-	};
-
-	segment@200000 {					/* 0x48200000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&l4_wkup {						/* 0x4ae00000 */
-	compatible = "ti,omap5-l4-wkup", "simple-pm-bus";
-	power-domains = <&prm_wkupaon>;
-	clocks = <&wkupaon_clkctrl OMAP5_L4_WKUP_CLKCTRL 0>;
-	clock-names = "fck";
-	reg = <0x4ae00000 0x800>,
-	      <0x4ae00800 0x800>,
-	      <0x4ae01000 0x1000>;
-	reg-names = "ap", "la", "ia0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x00000000 0x4ae00000 0x010000>,	/* segment 0 */
-		 <0x00010000 0x4ae10000 0x010000>,	/* segment 1 */
-		 <0x00020000 0x4ae20000 0x010000>;	/* segment 2 */
-
-	segment@0 {					/* 0x4ae00000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
-			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
-			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
-			 <0x00006000 0x00006000 0x002000>,	/* ap 3 */
-			 <0x00008000 0x00008000 0x001000>,	/* ap 4 */
-			 <0x0000a000 0x0000a000 0x001000>,	/* ap 15 */
-			 <0x0000b000 0x0000b000 0x001000>,	/* ap 16 */
-			 <0x00004000 0x00004000 0x001000>,	/* ap 17 */
-			 <0x00005000 0x00005000 0x001000>,	/* ap 18 */
-			 <0x0000c000 0x0000c000 0x001000>,	/* ap 19 */
-			 <0x0000d000 0x0000d000 0x001000>;	/* ap 20 */
-
-		target-module@4000 {			/* 0x4ae04000, ap 17 20.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4000 0x4>,
-			      <0x4010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>;
-			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
-			clocks = <&wkupaon_clkctrl OMAP5_COUNTER_32K_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-
-			counter32k: counter@0 {
-				compatible = "ti,omap-counter32k";
-				reg = <0x0 0x40>;
-			};
-		};
-
-		target-module@6000 {			/* 0x4ae06000, ap 3 08.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x6000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x6000 0x2000>;
-
-			prm: prm@0 {
-				compatible = "ti,omap5-prm", "simple-bus";
-				reg = <0x0 0x2000>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x2000>;
-
-				prm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prm_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		target-module@a000 {			/* 0x4ae0a000, ap 15 2c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xa000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xa000 0x1000>;
-
-			scrm: scrm@0 {
-				compatible = "ti,omap5-scrm";
-				reg = <0x0 0x1000>;
-
-				scrm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				scrm_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		target-module@c000 {			/* 0x4ae0c000, ap 19 28.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xc000 0x4>;
-			reg-names = "rev";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc000 0x1000>;
-
-			omap5_pmx_wkup: pinmux@840 {
-				compatible = "ti,omap5-padconf",
-					     "pinctrl-single";
-				reg = <0x840 0x003c>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#pinctrl-cells = <1>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				pinctrl-single,register-width = <16>;
-				pinctrl-single,function-mask = <0x7fff>;
-			};
-
-			omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@da0 {
-				compatible = "ti,omap5-scm-wkup-pad-conf",
-					     "simple-bus";
-				reg = <0xda0 0x60>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x60>;
-
-				scm_wkup_pad_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
-					reg = <0x0 0x60>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x0 0x60>;
-
-					scm_wkup_pad_conf_clocks: clocks@0 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-			};
-		};
-	};
-
-	segment@10000 {					/* 0x4ae10000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
-			 <0x00001000 0x00011000 0x001000>,	/* ap 6 */
-			 <0x00004000 0x00014000 0x001000>,	/* ap 7 */
-			 <0x00005000 0x00015000 0x001000>,	/* ap 8 */
-			 <0x00008000 0x00018000 0x001000>,	/* ap 9 */
-			 <0x00009000 0x00019000 0x001000>,	/* ap 10 */
-			 <0x0000c000 0x0001c000 0x001000>,	/* ap 11 */
-			 <0x0000d000 0x0001d000 0x001000>;	/* ap 12 */
-
-		target-module@0 {			/* 0x4ae10000, ap 5 10.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x0 0x4>,
-			      <0x10 0x4>,
-			      <0x114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
-			clocks = <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 0>,
-				 <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 8>;
-			clock-names = "fck", "dbclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x1000>;
-
-			gpio1: gpio@0 {
-				compatible = "ti,omap4-gpio";
-				reg = <0x0 0x200>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				ti,gpio-always-on;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
-
-		target-module@4000 {			/* 0x4ae14000, ap 7 14.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4000 0x4>,
-			      <0x4010 0x4>,
-			      <0x4014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
-			clocks = <&wkupaon_clkctrl OMAP5_WD_TIMER2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4000 0x1000>;
-
-			wdt2: wdt@0 {
-				compatible = "ti,omap5-wdt", "ti,omap3-wdt";
-				reg = <0x0 0x80>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		timer1_target: target-module@8000 {	/* 0x4ae18000, ap 9 18.0 */
-			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			reg = <0x8000 0x4>,
-			      <0x8010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP4_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
-			clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x8000 0x1000>;
-
-			timer1: timer@0 {
-				compatible = "ti,omap5430-timer";
-				reg = <0x0 0x80>;
-				clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>,
-					 <&sys_clkin>;
-				clock-names = "fck", "timer_sys_ck";
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				ti,timer-alwon;
-			};
-		};
-
-		target-module@c000 {			/* 0x4ae1c000, ap 11 1c.0 */
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0xc000 0x4>,
-			      <0xc010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
-					 SYSC_OMAP2_SOFTRESET)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
-			clocks = <&wkupaon_clkctrl OMAP5_KBD_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc000 0x1000>;
-
-			keypad: keypad@0 {
-				compatible = "ti,omap4-keypad";
-				reg = <0x0 0x400>;
-			};
-		};
-	};
-
-	segment@20000 {					/* 0x4ae20000 */
-		compatible = "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
-			 <0x0000a000 0x0002a000 0x001000>,	/* ap 14 */
-			 <0x00000000 0x00020000 0x001000>,	/* ap 21 */
-			 <0x00001000 0x00021000 0x001000>,	/* ap 22 */
-			 <0x00002000 0x00022000 0x001000>,	/* ap 23 */
-			 <0x00003000 0x00023000 0x001000>,	/* ap 24 */
-			 <0x00007000 0x00027000 0x000400>,	/* ap 25 */
-			 <0x00008000 0x00028000 0x000800>,	/* ap 26 */
-			 <0x00009000 0x00029000 0x000100>,	/* ap 27 */
-			 <0x00008800 0x00028800 0x000200>,	/* ap 28 */
-			 <0x00008a00 0x00028a00 0x000100>;	/* ap 29 */
-
-		target-module@0 {			/* 0x4ae20000, ap 21 04.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0x1000>;
-		};
-
-		target-module@2000 {			/* 0x4ae22000, ap 23 0c.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2000 0x1000>;
-		};
-
-		target-module@6000 {			/* 0x4ae26000, ap 13 24.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x00006000 0x00001000>,
-				 <0x00001000 0x00007000 0x00000400>,
-				 <0x00002000 0x00008000 0x00000800>,
-				 <0x00002800 0x00008800 0x00000200>,
-				 <0x00002a00 0x00008a00 0x00000100>,
-				 <0x00003000 0x00009000 0x00000100>;
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts
deleted file mode 100644
index 657df46251c2e..0000000000000
--- a/arch/arm/boot/dts/omap5-sbc-t54.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Suppport for CompuLab CM-T54 on SB-T54 baseboard
- */
-
-#include "omap5-cm-t54.dts"
-
-/ {
-	model = "CompuLab CM-T54 on SB-T54";
-	compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5";
-};
-
-&omap5_pmx_core {
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
-			OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
-		>;
-	};
-
-	mmc1_aux_pins: pinmux_mmc1_aux_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* timer5_pwm_evt.gpio8_228 */
-			OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* timer6_pwm_evt.gpio8_229 */
-		>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&mmc1_pins
-		&mmc1_aux_pins
-	>;
-	cd-inverted;
-	wp-inverted;
-	cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */
-	wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-
-	at24@50 {
-		compatible = "atmel,24c02";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
deleted file mode 100644
index 453da9f18a997..0000000000000
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap5-board-common.dtsi"
-
-/ {
-	model = "TI OMAP5 uEVM board";
-	compatible = "ti,omap5-uevm", "ti,omap5";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		dsp_memory_region: dsp-memory@95000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x95000000 0 0x800000>;
-			reusable;
-			status = "okay";
-		};
-
-		ipu_memory_region: ipu-memory@95800000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x95800000 0 0x3800000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	aliases {
-		ethernet = &ethernet;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "omap5:blue:usr1";
-			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	evm_keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&evm_keys_pins>;
-
-		#address-cells = <7>;
-		#size-cells = <0>;
-
-		btn1 {
-			label = "BTN1";
-			linux,code = <169>;
-			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;	/* gpio3_83 */
-			wakeup-source;
-			autorepeat;
-			debounce-interval = <50>;
-		};
-	};
-
-	evm_leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "omap5:red:led";
-			gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led2 {
-			label = "omap5:green:led";
-			gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-
-		led3 {
-			label = "omap5:blue:led";
-			gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc2";
-			default-state = "off";
-		};
-
-		led4 {
-			label = "omap5:green:led1";
-			gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led5 {
-			label = "omap5:green:led2";
-			gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-			default-state = "off";
-		};
-
-		led6 {
-			label = "omap5:green:led3";
-			gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led7 {
-			label = "omap5:green:led4";
-			gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-			default-state = "off";
-		};
-
-		led8 {
-			label = "omap5:green:led5";
-			gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-};
-
-&hdmi {
-	vdda-supply = <&ldo4_reg>;
-};
-
-&i2c1 {
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-	};
-};
-
-&i2c5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins>;
-
-	clock-frequency = <400000>;
-
-	gpio9: gpio@22 {
-		compatible = "ti,tca6424";
-		reg = <0x22>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-
-	cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>;	/* gpio5_152 */
-};
-
-&omap5_pmx_core {
-	evm_keys_pins: pinmux_evm_keys_gpio_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6)	/* gpio3_83 */
-		>;
-	};
-
-	i2c5_pins: pinmux_i2c5_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
-			OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6)	/* gpio5_152 */
-		>;
-	};
-};
-
-&tpd12s015 {
-	gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
-		<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
-		<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
-};
-
-&twl6040 {
-	ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */
-};
-
-&twl6040_pins {
-	pinctrl-single,pins = <
-		OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
-	>;
-};
-
-&usbhsehci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hub@2 {
-		compatible = "usb424,3503";
-		reg = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	ethernet: ethernet@3 {
-		compatible = "usb424,9730";
-		reg = <3>;
-	};
-};
-
-&wlcore {
-	compatible = "ti,wl1837";
-};
-
-&dsp {
-	status = "okay";
-	memory-region = <&dsp_memory_region>;
-	ti,timers = <&timer5>;
-	ti,watchdog-timers = <&timer6>;
-};
-
-&ipu {
-	status = "okay";
-	memory-region = <&ipu_memory_region>;
-	ti,timers = <&timer3>;
-	ti,watchdog-timers = <&timer9>, <&timer11>;
-};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
deleted file mode 100644
index bac6fa8387936..0000000000000
--- a/arch/arm/boot/dts/omap5.dtsi
+++ /dev/null
@@ -1,831 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Based on "omap4.dtsi"
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/omap.h>
-#include <dt-bindings/clock/omap5.h>
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	compatible = "ti,omap5";
-	interrupt-parent = <&wakeupgen>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		i2c4 = &i2c5;
-		mmc0 = &mmc1;
-		mmc1 = &mmc2;
-		mmc2 = &mmc3;
-		mmc3 = &mmc4;
-		mmc4 = &mmc5;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		rproc0 = &dsp;
-		rproc1 = &ipu;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-
-			operating-points = <
-				/* kHz    uV */
-				1000000 1060000
-				1500000 1250000
-			>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-
-			/* cooling options */
-			#cooling-cells = <2>; /* min followed by max */
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-
-			operating-points = <
-				/* kHz    uV */
-				1000000 1060000
-				1500000 1250000
-			>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-
-			/* cooling options */
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	thermal-zones {
-		#include "omap4-cpu-thermal.dtsi"
-		#include "omap5-gpu-thermal.dtsi"
-		#include "omap5-core-thermal.dtsi"
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		/* PPI secure/nonsecure IRQ */
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
-		interrupt-parent = <&gic>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/*
-	 * Needed early by omap4_sram_init() for barrier, do not move to l3
-	 * interconnect as simple-pm-bus probes at module_init() time.
-	 */
-	ocmcram: sram@40300000 {
-		compatible = "mmio-sram";
-		reg = <0 0x40300000 0 0x20000>; /* 128k */
-	};
-
-	gic: interrupt-controller@48211000 {
-		compatible = "arm,cortex-a15-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0 0x48211000 0 0x1000>,
-		      <0 0x48212000 0 0x2000>,
-		      <0 0x48214000 0 0x2000>,
-		      <0 0x48216000 0 0x2000>;
-		interrupt-parent = <&gic>;
-	};
-
-	wakeupgen: interrupt-controller@48281000 {
-		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0 0x48281000 0 0x1000>;
-		interrupt-parent = <&gic>;
-	};
-
-	/*
-	 * XXX: Use a flat representation of the OMAP3 interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "simple-pm-bus";
-		power-domains = <&prm_core>;
-		clocks = <&l3main1_clkctrl OMAP5_L3_MAIN_1_CLKCTRL 0>,
-			 <&l3main2_clkctrl OMAP5_L3_MAIN_2_CLKCTRL 0>,
-			 <&l3instr_clkctrl OMAP5_L3_MAIN_3_CLKCTRL 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0xc0000000>;
-		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
-
-		l3-noc@44000000 {
-			compatible = "ti,omap5-l3-noc";
-			reg = <0x44000000 0x2000>,
-			      <0x44800000 0x3000>,
-			      <0x45000000 0x4000>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		l4_wkup: interconnect@4ae00000 {
-		};
-
-		l4_cfg: interconnect@4a000000 {
-		};
-
-		l4_per: interconnect@48000000 {
-		};
-
-		target-module@48210000 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			power-domains = <&prm_mpu>;
-			clocks = <&mpu_clkctrl OMAP5_MPU_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48210000 0x1f0000>;
-
-			mpu {
-				compatible = "ti,omap4-mpu";
-				sram = <&ocmcram>;
-			};
-		};
-
-		l4_abe: interconnect@40100000 {
-		};
-
-		target-module@50000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x50000000 4>,
-			      <0x50000010 4>,
-			      <0x50000014 4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			ti,no-idle-on-init;
-			clocks = <&l3main2_clkctrl OMAP5_L3_MAIN_2_GPMC_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
-				 <0x00000000 0x00000000 0x40000000>; /* data */
-
-			gpmc: gpmc@50000000 {
-				compatible = "ti,omap4430-gpmc";
-				reg = <0x50000000 0x1000>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 4>;
-				dma-names = "rxtx";
-				gpmc,num-cs = <8>;
-				gpmc,num-waitpins = <4>;
-				clock-names = "fck";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-
-		target-module@55082000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x55082000 0x4>,
-			      <0x55082010 0x4>,
-			      <0x55082014 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
-			clock-names = "fck";
-			resets = <&prm_core 2>;
-			reset-names = "rstctrl";
-			ranges = <0x0 0x55082000 0x100>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			mmu_ipu: mmu@0 {
-				compatible = "ti,omap4-iommu";
-				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-				#iommu-cells = <0>;
-				ti,iommu-bus-err-back;
-			};
-		};
-
-		dsp: dsp {
-			compatible = "ti,omap5-dsp";
-			ti,bootreg = <&scm_conf 0x304 0>;
-			iommus = <&mmu_dsp>;
-			resets = <&prm_dsp 0>;
-			clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
-			firmware-name = "omap5-dsp-fw.xe64T";
-			mboxes = <&mailbox &mbox_dsp>;
-			status = "disabled";
-		};
-
-		ipu: ipu@55020000 {
-			compatible = "ti,omap5-ipu";
-			reg = <0x55020000 0x10000>;
-			reg-names = "l2ram";
-			iommus = <&mmu_ipu>;
-			resets = <&prm_core 0>, <&prm_core 1>;
-			clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
-			firmware-name = "omap5-ipu-fw.xem4";
-			mboxes = <&mailbox &mbox_ipu>;
-			status = "disabled";
-		};
-
-		target-module@4e000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4e000000 0x4>,
-			      <0x4e000010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ranges = <0x0 0x4e000000 0x2000000>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			dmm@0 {
-				compatible = "ti,omap5-dmm";
-				reg = <0 0x800>;
-				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@4c000000 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x4c000000 0x4>;
-			reg-names = "rev";
-			clocks = <&emif_clkctrl OMAP5_EMIF1_CLKCTRL 0>;
-			clock-names = "fck";
-			ti,no-idle;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4c000000 0x1000000>;
-
-			emif1: emif@0 {
-				compatible = "ti,emif-4d5";
-				reg = <0 0x400>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				phy-type = <2>; /* DDR PHY type: Intelli PHY */
-				hw-caps-read-idle-ctrl;
-				hw-caps-ll-interface;
-				hw-caps-temp-alert;
-			};
-		};
-
-		target-module@4d000000 {
-			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			reg = <0x4d000000 0x4>;
-			reg-names = "rev";
-			clocks = <&emif_clkctrl OMAP5_EMIF2_CLKCTRL 0>;
-			clock-names = "fck";
-			ti,no-idle;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4d000000 0x1000000>;
-
-			emif2: emif@0 {
-				compatible = "ti,emif-4d5";
-				reg = <0 0x400>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				phy-type = <2>; /* DDR PHY type: Intelli PHY */
-				hw-caps-read-idle-ctrl;
-				hw-caps-ll-interface;
-				hw-caps-temp-alert;
-			};
-		};
-
-		aes1_target: target-module@4b501000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4b501080 0x4>,
-			      <0x4b501084 0x4>,
-			      <0x4b501088 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
-			clocks = <&l4sec_clkctrl OMAP5_AES1_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4b501000 0x1000>;
-
-			aes1: aes@0 {
-				compatible = "ti,omap4-aes";
-				reg = <0 0xa0>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 111>, <&sdma 110>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		aes2_target: target-module@4b701000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x4b701080 0x4>,
-			      <0x4b701084 0x4>,
-			      <0x4b701088 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
-			clocks = <&l4sec_clkctrl OMAP5_AES2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4b701000 0x1000>;
-
-			aes2: aes@0 {
-				compatible = "ti,omap4-aes";
-				reg = <0 0xa0>;
-				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 114>, <&sdma 113>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		sham_target: target-module@4b100000 {
-			compatible = "ti,sysc-omap3-sham", "ti,sysc";
-			reg = <0x4b100100 0x4>,
-			      <0x4b100110 0x4>,
-			      <0x4b100114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
-			clocks = <&l4sec_clkctrl OMAP5_SHA2MD5_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x4b100000 0x1000>;
-
-			sham: sham@0 {
-				compatible = "ti,omap4-sham";
-				reg = <0 0x300>;
-				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&sdma 119>;
-				dma-names = "rx";
-			};
-		};
-
-		bandgap: bandgap@4a0021e0 {
-			reg = <0x4a0021e0 0xc
-			       0x4a00232c 0xc
-			       0x4a002380 0x2c
-			       0x4a0023C0 0x3c>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			compatible = "ti,omap5430-bandgap";
-
-			#thermal-sensor-cells = <1>;
-		};
-
-		target-module@56000000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x5600fe00 0x4>,
-			      <0x5600fe10 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x56000000 0x2000000>;
-
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
-		};
-
-		target-module@58000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x58000000 4>,
-			      <0x58000014 4>;
-			reg-names = "rev", "syss";
-			ti,syss-mask = <1>;
-			power-domains = <&prm_dss>;
-			clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 0>,
-				 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
-				 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>,
-				 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>;
-			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x58000000 0x1000000>;
-
-			dss: dss@0 {
-				compatible = "ti,omap5-dss";
-				reg = <0 0x80>;
-				status = "disabled";
-				clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
-				clock-names = "fck";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x1000000>;
-
-				target-module@1000 {
-					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x1000 0x4>,
-					      <0x1010 0x4>,
-					      <0x1014 0x4>;
-					reg-names = "rev", "sysc", "syss";
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-midle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-							 SYSC_OMAP2_ENAWAKEUP |
-							 SYSC_OMAP2_SOFTRESET |
-							 SYSC_OMAP2_AUTOIDLE)>;
-					ti,syss-mask = <1>;
-					clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
-					clock-names = "fck";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x1000 0x1000>;
-
-					dispc@0 {
-						compatible = "ti,omap5-dispc";
-						reg = <0 0x1000>;
-						interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
-						clock-names = "fck";
-					};
-				};
-
-				target-module@2000 {
-					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x2000 0x4>,
-					      <0x2010 0x4>,
-					      <0x2014 0x4>;
-					reg-names = "rev", "sysc", "syss";
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
-							 SYSC_OMAP2_AUTOIDLE)>;
-					ti,syss-mask = <1>;
-					clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
-					clock-names = "fck";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x2000 0x1000>;
-
-					rfbi: encoder@0  {
-						compatible = "ti,omap5-rfbi";
-						reg = <0 0x100>;
-						status = "disabled";
-						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>;
-						clock-names = "fck", "ick";
-					};
-				};
-
-				target-module@4000 {
-					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x4000 0x4>,
-					      <0x4010 0x4>,
-					      <0x4014 0x4>;
-					reg-names = "rev", "sysc", "syss";
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-							 SYSC_OMAP2_ENAWAKEUP |
-							 SYSC_OMAP2_SOFTRESET |
-							 SYSC_OMAP2_AUTOIDLE)>;
-					ti,syss-mask = <1>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x4000 0x1000>;
-
-					dsi1: encoder@0 {
-						compatible = "ti,omap5-dsi";
-						reg = <0 0x200>,
-						      <0x200 0x40>,
-						      <0x300 0x40>;
-						reg-names = "proto", "phy", "pll";
-						interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
-							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
-						clock-names = "fck", "sys_clk";
-
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				target-module@9000 {
-					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x9000 0x4>,
-					      <0x9010 0x4>,
-					      <0x9014 0x4>;
-					reg-names = "rev", "sysc", "syss";
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>;
-					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-							 SYSC_OMAP2_ENAWAKEUP |
-							 SYSC_OMAP2_SOFTRESET |
-							 SYSC_OMAP2_AUTOIDLE)>;
-					ti,syss-mask = <1>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x9000 0x1000>;
-
-					dsi2: encoder@0 {
-						compatible = "ti,omap5-dsi";
-						reg = <0 0x200>,
-						      <0x200 0x40>,
-						      <0x300 0x40>;
-						reg-names = "proto", "phy", "pll";
-						interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
-							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
-						clock-names = "fck", "sys_clk";
-
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				target-module@40000 {
-					compatible = "ti,sysc-omap4", "ti,sysc";
-					reg = <0x40000 0x4>,
-					      <0x40010 0x4>;
-					reg-names = "rev", "sysc";
-					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-							<SYSC_IDLE_NO>,
-							<SYSC_IDLE_SMART>,
-							<SYSC_IDLE_SMART_WKUP>;
-					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
-					clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
-						 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
-					clock-names = "fck", "dss_clk";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x40000 0x40000>;
-
-					hdmi: encoder@0 {
-						compatible = "ti,omap5-hdmi";
-						reg = <0 0x200>,
-						      <0x200 0x80>,
-						      <0x300 0x80>,
-						      <0x20000 0x19000>;
-						reg-names = "wp", "pll", "phy", "core";
-						interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
-							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
-						clock-names = "fck", "sys_clk";
-						dmas = <&sdma 76>;
-						dma-names = "audio_tx";
-					};
-				};
-			};
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			compatible = "ti,abb-v2";
-			regulator-name = "abb_mpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
-			      <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
-			reg-names = "base-address", "int-address",
-				    "efuse-address", "ldo-address";
-			ti,tranxdone-status-mask = <0x80>;
-			/* LDOVBBMPU_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBMPU_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1060000		0	0x0	0 0x02000000 0x01F00000
-			1250000		0	0x4	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_mm: regulator-abb-mm {
-			compatible = "ti,abb-v2";
-			regulator-name = "abb_mm";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
-			      <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
-			reg-names = "base-address", "int-address",
-				    "efuse-address", "ldo-address";
-			ti,tranxdone-status-mask = <0x80000000>;
-			/* LDOVBBMM_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBMM_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1025000		0	0x0	0 0x02000000 0x01F00000
-			1120000		0	0x4	0 0x02000000 0x01F00000
-			>;
-		};
-	};
-};
-
-&cpu_thermal {
-	polling-delay = <500>; /* milliseconds */
-	coefficients = <65 (-1791)>;
-};
-
-#include "omap5-l4.dtsi"
-#include "omap54xx-clocks.dtsi"
-
-&gpu_thermal {
-	coefficients = <117 (-2992)>;
-};
-
-&core_thermal {
-	coefficients = <0 2000>;
-};
-
-#include "omap5-l4-abe.dtsi"
-#include "omap54xx-clocks.dtsi"
-
-&prm {
-	prm_mpu: prm@300 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x300 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_dsp: prm@400 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x400 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_abe: prm@500 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x500 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_coreaon: prm@600 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x600 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_core: prm@700 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x700 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_iva: prm@1200 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1200 0x100>;
-		#reset-cells = <1>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_cam: prm@1300 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1300 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_dss: prm@1400 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1400 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_gpu: prm@1500 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1500 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_l3init: prm@1600 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1600 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_custefuse: prm@1700 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1700 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_wkupaon: prm@1800 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1800 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_emu: prm@1a00 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1a00 0x100>;
-		#power-domain-cells = <0>;
-	};
-
-	prm_device: prm@1c00 {
-		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
-		reg = <0x1c00 0x100>;
-		#reset-cells = <1>;
-	};
-};
-
-/* Preferred always-on timer for clockevent */
-&timer1_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>;
-		assigned-clock-parents = <&sys_32k_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
deleted file mode 100644
index 5cf3b0e78c159..0000000000000
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ /dev/null
@@ -1,1362 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP5 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&cm_core_aon_clocks {
-	pad_clks_src_ck: pad_clks_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "pad_clks_src_ck";
-		clock-frequency = <12000000>;
-	};
-
-	pad_clks_ck: pad_clks_ck@108 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "pad_clks_ck";
-		clocks = <&pad_clks_src_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0108>;
-	};
-
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "secure_32k_clk_src_ck";
-		clock-frequency = <32768>;
-	};
-
-	slimbus_src_clk: slimbus_src_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "slimbus_src_clk";
-		clock-frequency = <12000000>;
-	};
-
-	slimbus_clk: slimbus_clk@108 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "slimbus_clk";
-		clocks = <&slimbus_src_clk>;
-		ti,bit-shift = <10>;
-		reg = <0x0108>;
-	};
-
-	sys_32k_ck: sys_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "sys_32k_ck";
-		clock-frequency = <32768>;
-	};
-
-	virt_12000000_ck: virt_12000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_12000000_ck";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13000000_ck: virt_13000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_13000000_ck";
-		clock-frequency = <13000000>;
-	};
-
-	virt_16800000_ck: virt_16800000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_16800000_ck";
-		clock-frequency = <16800000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_19200000_ck";
-		clock-frequency = <19200000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_26000000_ck";
-		clock-frequency = <26000000>;
-	};
-
-	virt_27000000_ck: virt_27000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_27000000_ck";
-		clock-frequency = <27000000>;
-	};
-
-	virt_38400000_ck: virt_38400000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "virt_38400000_ck";
-		clock-frequency = <38400000>;
-	};
-
-	xclk60mhsp1_ck: xclk60mhsp1_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "xclk60mhsp1_ck";
-		clock-frequency = <60000000>;
-	};
-
-	xclk60mhsp2_ck: xclk60mhsp2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "xclk60mhsp2_ck";
-		clock-frequency = <60000000>;
-	};
-
-	dpll_abe_ck: dpll_abe_ck@1e0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-m4xen-clock";
-		clock-output-names = "dpll_abe_ck";
-		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
-		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
-	};
-
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_abe_x2_ck";
-		clocks = <&dpll_abe_ck>;
-	};
-
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_abe_m2x2_ck";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-	};
-
-	abe_24m_fclk: abe_24m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "abe_24m_fclk";
-		clocks = <&dpll_abe_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	abe_clk: abe_clk@108 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "abe_clk";
-		clocks = <&dpll_abe_m2x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x0108>;
-		ti,index-power-of-two;
-	};
-
-	abe_iclk: abe_iclk@528 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "abe_iclk";
-		clocks = <&aess_fclk>;
-		ti,bit-shift = <24>;
-		reg = <0x0528>;
-		ti,dividers = <2>, <1>;
-	};
-
-	abe_lp_clk_div: abe_lp_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "abe_lp_clk_div";
-		clocks = <&dpll_abe_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_abe_m3x2_ck";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x01f4>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_byp_mux: dpll_core_byp_mux@12c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_core_byp_mux";
-		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x012c>;
-	};
-
-	dpll_core_ck: dpll_core_ck@120 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-core-clock";
-		clock-output-names = "dpll_core_ck";
-		clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
-		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_core_x2_ck";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h21x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-	};
-
-	c2c_fclk: c2c_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "c2c_fclk";
-		clocks = <&dpll_core_h21x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	c2c_iclk: c2c_iclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "c2c_iclk";
-		clocks = <&c2c_fclk>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h11x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0138>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h12x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x013c>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h13x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h14x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0144>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h22x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h23x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_h24x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m2_ck: dpll_core_m2_ck@130 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m2_ck";
-		clocks = <&dpll_core_ck>;
-		ti,max-div = <31>;
-		reg = <0x0130>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_core_m3x2_ck";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0134>;
-		ti,index-starts-at-one;
-	};
-
-	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "iva_dpll_hs_clk_div";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_iva_byp_mux";
-		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x01ac>;
-	};
-
-	dpll_iva_ck: dpll_iva_ck@1a0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_iva_ck";
-		clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
-		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
-		assigned-clocks = <&dpll_iva_ck>;
-		assigned-clock-rates = <1165000000>;
-	};
-
-	dpll_iva_x2_ck: dpll_iva_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_iva_x2_ck";
-		clocks = <&dpll_iva_ck>;
-	};
-
-	dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_iva_h11x2_ck";
-		clocks = <&dpll_iva_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x01b8>;
-		ti,index-starts-at-one;
-		assigned-clocks = <&dpll_iva_h11x2_ck>;
-		assigned-clock-rates = <465920000>;
-	};
-
-	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_iva_h12x2_ck";
-		clocks = <&dpll_iva_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x01bc>;
-		ti,index-starts-at-one;
-		assigned-clocks = <&dpll_iva_h12x2_ck>;
-		assigned-clock-rates = <388300000>;
-	};
-
-	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "mpu_dpll_hs_clk_div";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck@160 {
-		#clock-cells = <0>;
-		compatible = "ti,omap5-mpu-dpll-clock";
-		clock-output-names = "dpll_mpu_ck";
-		clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
-		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_mpu_m2_ck";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		reg = <0x0170>;
-		ti,index-starts-at-one;
-	};
-
-	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "per_dpll_hs_clk_div";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "usb_dpll_hs_clk_div";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	l3_iclk_div: l3_iclk_div@100 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "l3_iclk_div";
-		ti,max-div = <2>;
-		ti,bit-shift = <4>;
-		reg = <0x100>;
-		clocks = <&dpll_core_h12x2_ck>;
-		ti,index-power-of-two;
-	};
-
-	gpu_l3_iclk: gpu_l3_iclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "gpu_l3_iclk";
-		clocks = <&l3_iclk_div>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4_root_clk_div: l4_root_clk_div@100 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "l4_root_clk_div";
-		ti,max-div = <2>;
-		ti,bit-shift = <8>;
-		reg = <0x100>;
-		clocks = <&l3_iclk_div>;
-		ti,index-power-of-two;
-	};
-
-	slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "slimbus1_slimbus_clk";
-		clocks = <&slimbus_clk>;
-		ti,bit-shift = <11>;
-		reg = <0x0560>;
-	};
-
-	aess_fclk: aess_fclk@528 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "aess_fclk";
-		clocks = <&abe_clk>;
-		ti,bit-shift = <24>;
-		ti,max-div = <2>;
-		reg = <0x0528>;
-	};
-
-	mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "mcasp_sync_mux_ck";
-		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
-		ti,bit-shift = <26>;
-		reg = <0x0540>;
-	};
-
-	mcasp_gfclk: mcasp_gfclk@540 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "mcasp_gfclk";
-		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0540>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-output-names = "dummy_ck";
-		clock-frequency = <0>;
-	};
-};
-&prm_clocks {
-	sys_clkin: sys_clkin@110 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "sys_clkin";
-		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
-		reg = <0x0110>;
-		ti,index-starts-at-one;
-	};
-
-	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "abe_dpll_bypass_clk_mux";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		reg = <0x0108>;
-	};
-
-	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "abe_dpll_clk_mux";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		reg = <0x010c>;
-	};
-
-	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "custefuse_sys_gfclk_div";
-		clocks = <&sys_clkin>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dss_syc_gfclk_div: dss_syc_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dss_syc_gfclk_div";
-		clocks = <&sys_clkin>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "wkupaon_iclk_mux";
-		clocks = <&sys_clkin>, <&abe_lp_clk_div>;
-		reg = <0x0108>;
-	};
-
-	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "l3instr_ts_gclk_div";
-		clocks = <&wkupaon_iclk_mux>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-};
-
-&cm_core_clocks {
-
-	dpll_per_byp_mux: dpll_per_byp_mux@14c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_per_byp_mux";
-		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x014c>;
-	};
-
-	dpll_per_ck: dpll_per_ck@140 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_per_ck";
-		clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
-		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
-	};
-
-	dpll_per_x2_ck: dpll_per_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clock-output-names = "dpll_per_x2_ck";
-		clocks = <&dpll_per_ck>;
-	};
-
-	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_h11x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_h12x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_h14x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0164>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck@150 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_m2_ck";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_m2x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_per_m3x2_ck";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_unipro1_ck: dpll_unipro1_ck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_unipro1_ck";
-		clocks = <&sys_clkin>, <&sys_clkin>;
-		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
-	};
-
-	dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dpll_unipro1_clkdcoldo";
-		clocks = <&dpll_unipro1_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_unipro1_m2_ck";
-		clocks = <&dpll_unipro1_ck>;
-		ti,max-div = <127>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_unipro2_ck: dpll_unipro2_ck@1c0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clock-output-names = "dpll_unipro2_ck";
-		clocks = <&sys_clkin>, <&sys_clkin>;
-		reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>;
-	};
-
-	dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dpll_unipro2_clkdcoldo";
-		clocks = <&dpll_unipro2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_unipro2_m2_ck";
-		clocks = <&dpll_unipro2_ck>;
-		ti,max-div = <127>;
-		reg = <0x01d0>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_usb_byp_mux";
-		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x018c>;
-	};
-
-	dpll_usb_ck: dpll_usb_ck@180 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-j-type-clock";
-		clock-output-names = "dpll_usb_ck";
-		clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
-		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
-	};
-
-	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "dpll_usb_clkdcoldo";
-		clocks = <&dpll_usb_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dpll_usb_m2_ck";
-		clocks = <&dpll_usb_ck>;
-		ti,max-div = <127>;
-		reg = <0x0190>;
-		ti,index-starts-at-one;
-	};
-
-	func_128m_clk: func_128m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_128m_clk";
-		clocks = <&dpll_per_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	func_12m_fclk: func_12m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_12m_fclk";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	func_24m_clk: func_24m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_24m_clk";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_48m_fclk: func_48m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_48m_fclk";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_96m_fclk: func_96m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-output-names = "func_96m_fclk";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l3init_60m_fclk: l3init_60m_fclk@104 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "l3init_60m_fclk";
-		clocks = <&dpll_usb_m2_ck>;
-		reg = <0x0104>;
-		ti,dividers = <1>, <8>;
-	};
-
-	iss_ctrlclk: iss_ctrlclk@1320 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "iss_ctrlclk";
-		clocks = <&func_96m_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1320>;
-	};
-
-	lli_txphy_clk: lli_txphy_clk@f20 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "lli_txphy_clk";
-		clocks = <&dpll_unipro1_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x0f20>;
-	};
-
-	lli_txphy_ls_clk: lli_txphy_ls_clk@f20 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "lli_txphy_ls_clk";
-		clocks = <&dpll_unipro1_m2_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0f20>;
-	};
-
-	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "usb_phy_cm_clk32k";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0640>;
-	};
-
-	fdif_fclk: fdif_fclk@1328 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "fdif_fclk";
-		clocks = <&dpll_per_h11x2_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <2>;
-		reg = <0x1328>;
-	};
-
-	gpu_core_gclk_mux: gpu_core_gclk_mux@1520 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "gpu_core_gclk_mux";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1520>;
-	};
-
-	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "gpu_hyd_gclk_mux";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x1520>;
-	};
-
-	hsi_fclk: hsi_fclk@1638 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "hsi_fclk";
-		clocks = <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <2>;
-		reg = <0x1638>;
-	};
-};
-
-&cm_core_clockdomains {
-	l3init_clkdm: l3init_clkdm {
-		compatible = "ti,clockdomain";
-		clock-output-names = "l3init_clkdm";
-		clocks = <&dpll_usb_ck>;
-	};
-};
-
-&scrm_clocks {
-	auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clock-output-names = "auxclk0_src_gate_ck";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0310>;
-	};
-
-	auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clock-output-names = "auxclk0_src_mux_ck";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0310>;
-	};
-
-	auxclk0_src_ck: auxclk0_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clock-output-names = "auxclk0_src_ck";
-		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
-	};
-
-	auxclk0_ck: auxclk0_ck@310 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "auxclk0_ck";
-		clocks = <&auxclk0_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0310>;
-	};
-
-	auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clock-output-names = "auxclk1_src_gate_ck";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0314>;
-	};
-
-	auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clock-output-names = "auxclk1_src_mux_ck";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0314>;
-	};
-
-	auxclk1_src_ck: auxclk1_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clock-output-names = "auxclk1_src_ck";
-		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
-	};
-
-	auxclk1_ck: auxclk1_ck@314 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "auxclk1_ck";
-		clocks = <&auxclk1_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0314>;
-	};
-
-	auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clock-output-names = "auxclk2_src_gate_ck";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0318>;
-	};
-
-	auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clock-output-names = "auxclk2_src_mux_ck";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0318>;
-	};
-
-	auxclk2_src_ck: auxclk2_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clock-output-names = "auxclk2_src_ck";
-		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
-	};
-
-	auxclk2_ck: auxclk2_ck@318 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "auxclk2_ck";
-		clocks = <&auxclk2_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0318>;
-	};
-
-	auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clock-output-names = "auxclk3_src_gate_ck";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x031c>;
-	};
-
-	auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clock-output-names = "auxclk3_src_mux_ck";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x031c>;
-	};
-
-	auxclk3_src_ck: auxclk3_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clock-output-names = "auxclk3_src_ck";
-		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
-	};
-
-	auxclk3_ck: auxclk3_ck@31c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "auxclk3_ck";
-		clocks = <&auxclk3_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x031c>;
-	};
-
-	auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clock-output-names = "auxclk4_src_gate_ck";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0320>;
-	};
-
-	auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clock-output-names = "auxclk4_src_mux_ck";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0320>;
-	};
-
-	auxclk4_src_ck: auxclk4_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clock-output-names = "auxclk4_src_ck";
-		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
-	};
-
-	auxclk4_ck: auxclk4_ck@320 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "auxclk4_ck";
-		clocks = <&auxclk4_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0320>;
-	};
-
-	auxclkreq0_ck: auxclkreq0_ck@210 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "auxclkreq0_ck";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0210>;
-	};
-
-	auxclkreq1_ck: auxclkreq1_ck@214 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "auxclkreq1_ck";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0214>;
-	};
-
-	auxclkreq2_ck: auxclkreq2_ck@218 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "auxclkreq2_ck";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0218>;
-	};
-
-	auxclkreq3_ck: auxclkreq3_ck@21c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "auxclkreq3_ck";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x021c>;
-	};
-};
-
-&cm_core_aon {
-	mpu_cm: mpu_cm@300 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "mpu_cm";
-		reg = <0x300 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x300 0x100>;
-
-		mpu_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "mpu_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	dsp_cm: dsp_cm@400 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "dsp_cm";
-		reg = <0x400 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x400 0x100>;
-
-		dsp_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "dsp_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	abe_cm: abe_cm@500 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "abe_cm";
-		reg = <0x500 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x500 0x100>;
-
-		abe_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "abe_clkctrl";
-			reg = <0x20 0x64>;
-			#clock-cells = <2>;
-		};
-	};
-
-};
-
-&cm_core {
-	l3main1_cm: l3main1_cm@700 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3main1_cm";
-		reg = <0x700 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x700 0x100>;
-
-		l3main1_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3main1_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3main2_cm: l3main2_cm@800 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3main2_cm";
-		reg = <0x800 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x800 0x100>;
-
-		l3main2_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3main2_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	ipu_cm: ipu_cm@900 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "ipu_cm";
-		reg = <0x900 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x900 0x100>;
-
-		ipu_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "ipu_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	dma_cm: dma_cm@a00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "dma_cm";
-		reg = <0xa00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xa00 0x100>;
-
-		dma_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "dma_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	emif_cm: emif_cm@b00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "emif_cm";
-		reg = <0xb00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xb00 0x100>;
-
-		emif_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "emif_clkctrl";
-			reg = <0x20 0x1c>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4cfg_cm: l4cfg_cm@d00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l4cfg_cm";
-		reg = <0xd00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xd00 0x100>;
-
-		l4cfg_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4cfg_clkctrl";
-			reg = <0x20 0x14>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3instr_cm: l3instr_cm@e00 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3instr_cm";
-		reg = <0xe00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xe00 0x100>;
-
-		l3instr_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3instr_clkctrl";
-			reg = <0x20 0xc>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4per_cm: clock@1000 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l4per_cm";
-		reg = <0x1000 0x200>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1000 0x200>;
-
-		l4per_clkctrl: clock@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4per_clkctrl";
-			reg = <0x20 0x15c>;
-			#clock-cells = <2>;
-		};
-
-		l4sec_clkctrl: clock@1a0 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l4sec_clkctrl";
-			reg = <0x1a0 0x3c>;
-			#clock-cells = <2>;
-		};
-	};
-
-	dss_cm: dss_cm@1400 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "dss_cm";
-		reg = <0x1400 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1400 0x100>;
-
-		dss_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "dss_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	gpu_cm: gpu_cm@1500 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "gpu_cm";
-		reg = <0x1500 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1500 0x100>;
-
-		gpu_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "gpu_clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3init_cm: l3init_cm@1600 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "l3init_cm";
-		reg = <0x1600 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1600 0x100>;
-
-		l3init_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "l3init_clkctrl";
-			reg = <0x20 0xd4>;
-			#clock-cells = <2>;
-		};
-	};
-};
-
-&prm {
-	wkupaon_cm: wkupaon_cm@1900 {
-		compatible = "ti,omap4-cm";
-		clock-output-names = "wkupaon_cm";
-		reg = <0x1900 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1900 0x100>;
-
-		wkupaon_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
-			clock-output-names = "wkupaon_clkctrl";
-			reg = <0x20 0x5c>;
-			#clock-cells = <2>;
-		};
-	};
-};
-
-&scm_wkup_pad_conf_clocks {
-	fref_xtal_ck: fref_xtal_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clock-output-names = "fref_xtal_ck";
-		clocks = <&sys_clkin>;
-		ti,bit-shift = <28>;
-		reg = <0x14>;
-	};
-};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi
deleted file mode 100644
index 05101a38c5bd2..0000000000000
--- a/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-partitions {
-	compatible = "fixed-partitions";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	u-boot@0 {
-		reg = <0x0 0xe0000>; // 896KB
-		label = "u-boot";
-	};
-
-	u-boot-env@e0000 {
-		reg = <0xe0000 0x20000>; // 128KB
-		label = "u-boot-env";
-	};
-
-	kernel@100000 {
-		reg = <0x100000 0x900000>; // 9MB
-		label = "kernel";
-	};
-
-	rofs@a00000 {
-		reg = <0xa00000 0x5600000>; // 86MB
-		label = "rofs";
-	};
-
-	rwfs@6000000 {
-		reg = <0x6000000 0x2000000>; // 32MB
-		label = "rwfs";
-	};
-};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64-alt.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64-alt.dtsi
deleted file mode 100644
index 6505258675612..0000000000000
--- a/arch/arm/boot/dts/openbmc-flash-layout-64-alt.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2020 Bytedance.
- */
-
-partitions {
-	compatible = "fixed-partitions";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	u-boot@0 {
-		reg = <0x0 0xe0000>; // 896KB
-		label = "alt-u-boot";
-	};
-
-	u-boot-env@e0000 {
-		reg = <0xe0000 0x20000>; // 128KB
-		label = "alt-u-boot-env";
-	};
-
-	kernel@100000 {
-		reg = <0x100000 0x900000>; // 9MB
-		label = "alt-kernel";
-	};
-
-	rofs@a00000 {
-		reg = <0xa00000 0x2000000>; // 32MB
-		label = "alt-rofs";
-	};
-
-	rwfs@6000000 {
-		reg = <0x2a00000 0x1600000>; // 22MB
-		label = "alt-rwfs";
-	};
-};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
deleted file mode 100644
index 7af41361c4800..0000000000000
--- a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2020 Bytedance.
- */
-
-partitions {
-	compatible = "fixed-partitions";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	u-boot@0 {
-		reg = <0x0 0xe0000>; // 896KB
-		label = "u-boot";
-	};
-
-	u-boot-env@e0000 {
-		reg = <0xe0000 0x20000>; // 128KB
-		label = "u-boot-env";
-	};
-
-	kernel@100000 {
-		reg = <0x100000 0x900000>; // 9MB
-		label = "kernel";
-	};
-
-	rofs@a00000 {
-		reg = <0xa00000 0x2000000>; // 32MB
-		label = "rofs";
-	};
-
-	rwfs@2a00000 {
-		reg = <0x2a00000 0x1600000>; // 22MB
-		label = "rwfs";
-	};
-};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
deleted file mode 100644
index b47e14063c380..0000000000000
--- a/arch/arm/boot/dts/openbmc-flash-layout.dtsi
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-partitions {
-	compatible = "fixed-partitions";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	u-boot@0 {
-		reg = <0x0 0x60000>;
-		label = "u-boot";
-	};
-
-	u-boot-env@60000 {
-		reg = <0x60000 0x20000>;
-		label = "u-boot-env";
-	};
-
-	kernel@80000 {
-		reg = <0x80000 0x440000>;
-		label = "kernel";
-	};
-
-	rofs@4c0000 {
-		reg = <0x4c0000 0x1740000>;
-		label = "rofs";
-	};
-
-	rwfs@1c00000 {
-		reg = <0x1c00000 0x400000>;
-		label = "rwfs";
-	};
-};
diff --git a/arch/arm/boot/dts/orion5x-kuroboxpro.dts b/arch/arm/boot/dts/orion5x-kuroboxpro.dts
deleted file mode 100644
index e28b568e741a3..0000000000000
--- a/arch/arm/boot/dts/orion5x-kuroboxpro.dts
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Device Tree file for Buffalo/Revogear Kurobox Pro
- *
- * Copyright (C) 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c
- * Copyright (C) Ronen Shitrit <rshitrit@marvell.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "orion5x-linkstation.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Buffalo/Revogear Kurobox Pro";
-	compatible = "buffalo,kurobox-pro", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-				 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-				 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>,
-				 <MBUS_ID(0x01, 0x1e) 0 0xfc000000 0x1000000>;
-	};
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-};
-
-&pinctrl {
-	pmx_power_hdd: pmx-power-hdd {
-		marvell,pins = "mpp1";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_usb: pmx-power-usb {
-		marvell,pins = "mpp9";
-		marvell,function = "gpio";
-	};
-};
-
-&devbus_cs0 {
-	status = "okay";
-	compatible = "marvell,orion-nand";
-	reg = <MBUS_ID(0x01, 0x1e) 0 0x400>;
-	cle = <0>;
-	ale = <1>;
-	bank-width = <1>;
-
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uImage@0 { /* 4 MB */
-			reg = <0 0x400000>;
-			read-only;
-		};
-
-		rootfs@400000 { /* 64 MB */
-			reg = <0x400000 0x4000000>;
-			read-only;
-		};
-
-		extra@4400000 { /* 188 MB */
-			reg = <0x4400000 0xBC00000>;
-			read-only;
-		};
-	};
-};
-
-&hdd_power {
-	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-};
-
-&usb_power {
-	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-};
-
-&sata {
-	nr-ports = <2>;
-};
-
-&ehci1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
deleted file mode 100644
index 03471d30bfd95..0000000000000
--- a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "LaCie d2 Network";
-	compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		front_button {
-			label = "Front Push Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_rocker_sw_on {
-			label = "Power rocker switch (on|auto)";
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
-			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_rocker_sw_off {
-			label = "Power rocker switch (auto|off)";
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
-			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;
-		pinctrl-names = "default";
-
-		sata0_power: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "SATA0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata1_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	devbus,keep-config;
-
-	/*
-	 * Currently the MTD code does not recognize the MX29LV400CBCT
-	 * as a bottom-type device. This could cause risks of
-	 * accidentally erasing critical flash sectors. We thus define
-	 * a single, write-protected partition covering the whole
-	 * flash.  TODO: once the flash part TOP/BOTTOM detection
-	 * issue is sorted out in the MTD code, break this into at
-	 * least three partitions: 'u-boot code', 'u-boot environment'
-	 * and 'whatever is left'.
-	 */
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x80000>;
-		bank-width = <1>;
-                #address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "Full512Kb";
-			reg = <0 0x80000>;
-			read-only;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@32 {
-		compatible = "ricoh,rs5c372b";
-		reg = <0x32>;
-	};
-
-	fan@3e {
-		compatible = "gmt,g762";
-		reg = <0x3e>;
-
-		/* Not enough HW info */
-		status = "disabled";
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;
-	pinctrl-names = "default";
-
-	pmx_board_id: pmx-board-id {
-		marvell,pins = "mpp0", "mpp1", "mpp2";
-		marvell,function = "gpio";
-	};
-
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp8", "mpp9", "mpp18";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_fail: pmx-fan-fail {
-		marvell,pins = "mpp5";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * MPP6: Red front LED
-	 * MPP16: Blue front LED blink control
-	 */
-	pmx_leds: pmx-leds {
-		marvell,pins = "mpp6", "mpp16";
-		marvell,function = "gpio";
-	};
-
-	pmx_sata0_led_active: pmx-sata0-led-active {
-		marvell,pins = "mpp14";
-		marvell,function = "sata0";
-	};
-
-	pmx_sata0_power: pmx-sata0-power {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_sata1_led_active: pmx-sata1-led-active {
-		marvell,pins = "mpp15";
-		marvell,function = "sata1";
-	};
-
-	pmx_sata1_power: pmx-sata1-power {
-		marvell,pins = "mpp12";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * Non MPP GPIOs:
-	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
-	 *  GPIO 23: Blue front LED off
-	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
-	 */
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0_led_active
-		     &pmx_sata1_led_active>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
deleted file mode 100644
index f17e25ac98ddb..0000000000000
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
-/*
- * TODO: add Orion USB device port init when kernel.org support is added.
- * TODO: add flash write support: see below.
- * TODO: add power-off support.
- * TODO: add I2C EEPROM support.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "LaCie Ethernet Disk mini V2";
-	compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_power_button>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button@1 {
-			label = "Power-on Switch";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_power_led>;
-		pinctrl-names = "default";
-
-		led@1 {
-			label = "power:blue";
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Read parameters */
-	devbus,bus-width    = <8>;
-	devbus,turn-off-ps  = <90000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <186000>;
-	devbus,acc-next-ps  = <186000>;
-
-	/* Write parameters */
-	devbus,wr-high-ps  = <90000>;
-	devbus,wr-low-ps   = <90000>;
-	devbus,ale-wr-ps   = <90000>;
-
-	/*
-	 * Currently the MTD code does not recognize the MX29LV400CBCT
-	 * as a bottom-type device. This could cause risks of
-	 * accidentally erasing critical flash sectors. We thus define
-	 * a single, write-protected partition covering the whole
-	 * flash.  TODO: once the flash part TOP/BOTTOM detection
-	 * issue is sorted out in the MTD code, break this into at
-	 * least three partitions: 'u-boot code', 'u-boot environment'
-	 * and 'whatever is left'.
-	 */
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x80000>;
-		bank-width = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "Full512Kb";
-			reg = <0 0x80000>;
-			read-only;
-		};
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@32 {
-		compatible = "ricoh,rs5c372a";
-		reg = <0x32>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>;
-	pinctrl-names = "default";
-
-	pmx_power_button: pmx-power-button {
-		marvell,pins = "mpp18";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_led: pmx-power-led {
-		marvell,pins = "mpp16";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_led_ctrl: pmx-power-led-ctrl {
-		marvell,pins = "mpp17";
-		marvell,function = "gpio";
-	};
-
-	pmx_rtc: pmx-rtc {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts
deleted file mode 100644
index ee751995c8d0b..0000000000000
--- a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Device Tree file for Buffalo Linkstation LS-CHLv3
- *
- * Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk>
- * Copyright (C) 2015-2017
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "orion5x-linkstation.dtsi"
-#include "mvebu-linkstation-gpio-simple.dtsi"
-#include "mvebu-linkstation-fan.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Buffalo Linkstation LiveV3 (LS-CHL)";
-	compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	gpio_keys {
-		func {
-			label = "Function Button";
-			linux,code = <KEY_OPTION>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-
-		power-on-switch {
-			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-		};
-
-		power-auto-switch {
-			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds {
-		pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info &pmx_led_func>;
-		blue-power-led {
-			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-		};
-
-		red-alarm-led {
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-		};
-
-		amber-info-led {
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-		};
-
-		func {
-			label = "lschl:func:blue:top";
-			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_fan {
-		gpios = <&gpio0 14 GPIO_ACTIVE_LOW
-			 &gpio0 16 GPIO_ACTIVE_LOW>;
-
-		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&pinctrl {
-	pmx_led_power: pmx-leds {
-		marvell,pins = "mpp0";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_hdd: pmx-power-hdd {
-		marvell,pins = "mpp1";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_alarm: pmx-leds {
-		marvell,pins = "mpp2";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_info: pmx-leds {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_lock: pmx-fan-lock {
-		marvell,pins = "mpp6";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_switch: pmx-power-switch {
-		marvell,pins = "mpp8", "mpp10", "mpp15";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_usb: pmx-power-usb {
-		marvell,pins = "mpp9";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_high: pmx-fan-high {
-		marvell,pins = "mpp14";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_low: pmx-fan-low {
-		marvell,pins = "mpp16";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_func: pmx-leds {
-		marvell,pins = "mpp17";
-		marvell,function = "gpio";
-	};
-
-	pmx_sw_init: pmx-sw-init {
-		marvell,pins = "mpp7";
-		marvell,function = "gpio";
-	};
-};
-
-&hdd_power {
-	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-};
-
-&usb_power {
-	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-};
-
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
deleted file mode 100644
index 9f6fedd391705..0000000000000
--- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Device Tree file for Buffalo Linkstation LS-GL
- *       (also known as Buffalo Linkstation Pro/Live)
- *
- * Copyright (C) 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c
- * Copyright (C) Ronen Shitrit <rshitrit@marvell.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "orion5x-linkstation.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Buffalo Linkstation Pro/Live";
-	compatible = "buffalo,lsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-};
-
-&pinctrl {
-	pmx_power_hdd: pmx-power-hdd {
-		marvell,pins = "mpp1";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_usb: pmx-power-usb {
-		marvell,pins = "mpp9";
-		marvell,function = "gpio";
-	};
-};
-
-&hdd_power {
-	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-};
-
-&usb_power {
-	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-};
-
-&sata {
-	nr-ports = <2>;
-};
-
-&ehci1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
deleted file mode 100644
index 7f77ce8cc1fc6..0000000000000
--- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Device Tree file for Buffalo Linkstation LS-WTGL
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "orion5x-linkstation.dtsi"
-#include "mvebu-linkstation-gpio-simple.dtsi"
-#include "mvebu-linkstation-fan.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Buffalo Linkstation LS-WTGL";
-	compatible = "buffalo,lswtgl", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory { /* 64 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	gpio_keys {
-		power-on-switch {
-			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-		};
-
-		power-auto-switch {
-			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds {
-		blue-power-led {
-			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-		};
-
-		red-alarm-led {
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-		};
-
-		amber-info-led {
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_fan {
-		gpios = <&gpio0 14 GPIO_ACTIVE_LOW
-			 &gpio0 17 GPIO_ACTIVE_LOW>;
-
-		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&pinctrl {
-	pmx_led_power: pmx-leds {
-		marvell,pins = "mpp0";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_hdd: pmx-power-hdd {
-		marvell,pins = "mpp1";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_alarm: pmx-leds {
-		marvell,pins = "mpp2";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_info: pmx-leds {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_lock: pmx-fan-lock {
-		marvell,pins = "mpp6";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_switch: pmx-power-switch {
-		marvell,pins = "mpp8", "mpp10";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_usb: pmx-power-usb {
-		marvell,pins = "mpp9";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_high: pmx-fan-high {
-		marvell,pins = "mpp14";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_low: pmx-fan-low {
-		marvell,pins = "mpp17";
-		marvell,function = "gpio";
-	};
-};
-
-&hdd_power {
-	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-};
-
-&usb_power {
-	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-};
-
-&sata {
-	nr-ports = <2>;
-};
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi
deleted file mode 100644
index b6c9b85951ea6..0000000000000
--- a/arch/arm/boot/dts/orion5x-linkstation.dtsi
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Device Tree common file for orion5x based Buffalo Linkstation
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-				 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-				 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
-	};
-
-	restart_poweroff {
-		compatible = "restart-poweroff";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		hdd_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "HDD Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
-
-&pinctrl {
-	pmx_power_hdd: pmx-power-hdd {
-		marvell,function = "gpio";
-	};
-
-	pmx_power_usb: pmx-power-usb {
-		marvell,function = "gpio";
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-	devbus,keep-config;
-
-	flash@0 {
-		compatible = "jedec-flash";
-		reg = <0 0x40000>;
-		bank-width = <1>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			header@0 {
-				reg = <0 0x30000>;
-				read-only;
-			};
-
-			uboot@30000 {
-				reg = <0x30000 0xF000>;
-				read-only;
-			};
-
-			uboot_env@3F000 {
-				reg = <0x3F000 0x1000>;
-			};
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&i2c {
-	status = "okay";
-
-	rtc@32 {
-		compatible = "ricoh,rs5c372a";
-		reg = <0x32>;
-	};
-};
-
-&wdt {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-	nr-ports = <1>;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/orion5x-lswsgl.dts
deleted file mode 100644
index 2fbc17d6dfa4c..0000000000000
--- a/arch/arm/boot/dts/orion5x-lswsgl.dts
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * Copyright (C) 2015 Benjamin Cama <benoar@dolka.fr>
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Based on the board file arch/arm/mach-orion5x/lsmini-setup.c,
- * Copyright (C) 2008 Alexey Kopytko <alexey@kopytko.ru>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "Buffalo Linkstation Mini (LS-WSGL)";
-	compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>; /* 128 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		func {
-			label = "Function Button";
-			linux,code = <KEY_OPTION>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-
-		power {
-			label = "Power-on Switch";
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */
-			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-		};
-
-		autopower {
-			label = "Power-auto Switch";
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */
-			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_alarm &pmx_led_info &pmx_led_func
-			     &pmx_led_power>;
-		pinctrl-names = "default";
-
-		alarm {
-			label = "lswsgl:alarm:red";
-			gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
-		};
-
-		info {
-			label = "lswsgl:info:amber";
-			gpio = <&gpio0 3 GPIO_ACTIVE_LOW>;
-		};
-
-		func {
-			label = "lswsgl:func:blue:top";
-			gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
-		};
-
-		power {
-			label = "lswsgl:power:blue:bottom";
-			gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-	};
-
-	restart_poweroff {
-		compatible = "restart-poweroff";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power &pmx_usb_power>;
-		pinctrl-names = "default";
-
-		sata0_power: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "SATA0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata1_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	devbus,keep-config;
-
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x40000>;
-		bank-width = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "Full256Kb";
-			reg = <0 0x40000>;
-			read-only;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@32 {
-		compatible = "ricoh,rs5c372a";
-		reg = <0x32>;
-	};
-};
-
-&pinctrl {
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp15", "mpp17", "mpp18";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_alarm: pmx-leds {
-		marvell,pins = "mpp2";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_info: pmx-leds {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_func: pmx-leds {
-		marvell,pins = "mpp9";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_power: pmx-leds {
-		marvell,pins = "mpp14";
-		marvell,function = "gpio";
-	};
-
-	pmx_sata0_power: pmx-sata0-power {
-		marvell,pins = "mpp1";
-		marvell,function = "gpio";
-	};
-
-	pmx_sata1_power: pmx-sata1-power {
-		marvell,pins = "mpp19";
-		marvell,function = "gpio";
-	};
-
-	pmx_usb_power: pmx-usb-power {
-		marvell,pins = "mpp16";
-		marvell,function = "gpio";
-	};
-};
-
-&sata {
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
deleted file mode 100644
index d57859998350d..0000000000000
--- a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
+++ /dev/null
@@ -1,176 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "Maxtor Shared Storage II";
-	compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power {
-			label = "Power";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-		};
-
-		reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	devbus,keep-config;
-
-	/*
-	 * Currently the MTD code does not recognize the MX29LV400CBCT
-	 * as a bottom-type device. This could cause risks of
-	 * accidentally erasing critical flash sectors. We thus define
-	 * a single, write-protected partition covering the whole
-	 * flash.  TODO: once the flash part TOP/BOTTOM detection
-	 * issue is sorted out in the MTD code, break this into at
-	 * least three partitions: 'u-boot code', 'u-boot environment'
-	 * and 'whatever is left'.
-	 */
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x40000>;
-		bank-width = <1>;
-                #address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@68 {
-		compatible = "st,m41t81";
-		reg = <0x68>;
-		pinctrl-0 = <&pmx_rtc>;
-		pinctrl-names = "default";
-		interrupt-parent = <&gpio0>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_leds &pmx_misc>;
-	pinctrl-names = "default";
-
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp11", "mpp12";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * MPP0: Power LED
-	 * MPP1: Error LED
-	 */
-	pmx_leds: pmx-leds {
-		marvell,pins = "mpp0", "mpp1";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * MPP4: HDD ind. (Single/Dual)
-	 * MPP5: HD0 5V control
-	 * MPP6: HD0 12V control
-	 * MPP7: HD1 5V control
-	 * MPP8: HD1 12V control
-	 */
-	pmx_misc: pmx-misc {
-		marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10";
-		marvell,function = "gpio";
-	};
-
-	pmx_rtc: pmx-rtc {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_sata0_led_active: pmx-sata0-led-active {
-		marvell,pins = "mpp14";
-		marvell,function = "sata0";
-	};
-
-	pmx_sata1_led_active: pmx-sata1-led-active {
-		marvell,pins = "mpp15";
-		marvell,function = "sata1";
-	};
-
-	/*
-	 * Non MPP GPIOs:
-	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
-	 *  GPIO 23: Blue front LED off
-	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
-	 */
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0_led_active
-		     &pmx_sata1_led_active>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi b/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
deleted file mode 100644
index 819f9efb7058d..0000000000000
--- a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
-
-#include "orion5x.dtsi"
-
-/ {
-	compatible = "marvell,orion5x-88f5181", "marvell,orion5x";
-
-	soc {
-		compatible = "marvell,orion5x-88f5181-mbus", "simple-bus";
-
-		internal-regs {
-			pinctrl: pinctrl@10000 {
-				compatible = "marvell,88f5181-pinctrl";
-				reg = <0x10000 0x8>, <0x10050 0x4>;
-			};
-
-			core_clk: core-clocks@10030 {
-				compatible = "marvell,mv88f5181-core-clock";
-				reg = <0x10010 0x4>;
-				#clock-cells = <1>;
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x1500 0x20>;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	pmx_ge: pmx-ge {
-		marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11",
-			       "mpp12", "mpp13", "mpp14", "mpp15",
-			       "mpp16", "mpp17", "mpp18", "mpp19";
-		marvell,function = "ge";
-	};
-};
-
-&eth {
-	pinctrl-0 = <&pmx_ge>;
-	pinctrl-names = "default";
-};
diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
deleted file mode 100644
index 86b87fb26dc9a..0000000000000
--- a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
-#include "orion5x.dtsi"
-
-/ {
-	compatible = "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	soc {
-		compatible = "marvell,orion5x-88f5182-mbus", "simple-bus";
-
-		internal-regs {
-			pinctrl: pinctrl@10000 {
-				compatible = "marvell,88f5182-pinctrl";
-				reg = <0x10000 0x8>, <0x10050 0x4>;
-
-				pmx_sata0: pmx-sata0 {
-					marvell,pins = "mpp12", "mpp14";
-					marvell,function = "sata0";
-				};
-
-				pmx_sata1: pmx-sata1 {
-					marvell,pins = "mpp13", "mpp15";
-					marvell,function = "sata1";
-				};
-			};
-
-			core_clk: core-clocks@10030 {
-				compatible = "marvell,mv88f5182-core-clock";
-				reg = <0x10010 0x4>;
-				#clock-cells = <1>;
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x1500 0x20>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
deleted file mode 100644
index fb203e7d37f5e..0000000000000
--- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
+++ /dev/null
@@ -1,252 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "orion5x-mv88f5181.dtsi"
-
-/ {
-	model = "Netgear WNR854-t";
-	compatible = "netgear,wnr854t", "marvell,orion5x-88f5181",
-		     "marvell,orion5x";
-	aliases {
-		serial0 = &uart0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x2000000>; /* 32 MB */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_reset_button>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>;
-		pinctrl-names = "default";
-
-		led@0 {
-			label = "wnr854t:green:power";
-			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-		};
-
-		led@1 {
-			label = "wnr854t:blink:power";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-		};
-
-		led@2 {
-			label = "wnr854t:green:wan";
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	devbus,keep-config;
-
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x800000>;
-		bank-width = <2>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "kernel";
-				reg = <0x0 0x100000>;
-			};
-
-			partition@100000 {
-				label = "rootfs";
-				reg = <0x100000 0x660000>;
-			};
-
-			partition@760000 {
-				label = "uboot_env";
-				reg = <0x760000 0x20000>;
-			};
-
-			partition@780000 {
-				label = "uboot";
-				reg = <0x780000 0x80000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	switch: switch@0 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		dsa,member = <0 0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan3";
-				phy-handle = <&lan3phy>;
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan4";
-				phy-handle = <&lan4phy>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "wan";
-				phy-handle = <&wanphy>;
-			};
-
-			port@3 {
-				reg = <3>;
-				ethernet = <&ethport>;
-				phy-mode = "rgmii-id";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "lan1";
-				phy-handle = <&lan1phy>;
-			};
-
-			port@7 {
-				reg = <7>;
-				label = "lan2";
-				phy-handle = <&lan2phy>;
-			};
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			lan3phy: ethernet-phy@0 {
-				/* Marvell 88E1121R (port 1) */
-				compatible = "ethernet-phy-id0141.0cb0",
-					     "ethernet-phy-ieee802.3-c22";
-				reg = <0>;
-				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
-			};
-
-			lan4phy: ethernet-phy@1 {
-				/* Marvell 88E1121R (port 2) */
-				compatible = "ethernet-phy-id0141.0cb0",
-					     "ethernet-phy-ieee802.3-c22";
-				reg = <1>;
-				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
-			};
-
-			wanphy: ethernet-phy@2 {
-				/* Marvell 88E1121R (port 1) */
-				compatible = "ethernet-phy-id0141.0cb0",
-					     "ethernet-phy-ieee802.3-c22";
-				reg = <2>;
-				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
-			};
-
-			lan1phy: ethernet-phy@5 {
-				/* Marvell 88E1112 */
-				compatible = "ethernet-phy-id0141.0cb0",
-					     "ethernet-phy-ieee802.3-c22";
-				reg = <5>;
-				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
-			};
-
-			lan2phy: ethernet-phy@7 {
-				/* Marvell 88E1112 */
-				compatible = "ethernet-phy-id0141.0cb0",
-					     "ethernet-phy-ieee802.3-c22";
-				reg = <7>;
-				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
-			};
-		};
-	};
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		/* Hardwired to DSA switch */
-		speed = <1000>;
-		duplex = <1>;
-		phy-mode = "rgmii";
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_pci_gpios>;
-	pinctrl-names = "default";
-
-	pmx_power_led: pmx-power-led {
-		marvell,pins = "mpp0";
-		marvell,function = "gpio";
-	};
-
-	pmx_reset_button: pmx-reset-button {
-		marvell,pins = "mpp1";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_led_blink: pmx-power-led-blink {
-		marvell,pins = "mpp2";
-		marvell,function = "gpio";
-	};
-
-	pmx_wan_led: pmx-wan-led {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_pci_gpios: pmx-pci-gpios {
-		marvell,pins = "mpp4";
-		marvell,function = "gpio";
-	};
-};
-
-&uart0 {
-	/* Pin 1: Tx, Pin 7: Rx, Pin 8: Gnd */
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
deleted file mode 100644
index fd78aa02a3c5b..0000000000000
--- a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
+++ /dev/null
@@ -1,173 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "Marvell Reference Design 88F5182 NAS";
-	compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-		         <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
-			 <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_debug_led>;
-		pinctrl-names = "default";
-
-		led@0 {
-			label = "rd88f5182:cpu";
-			linux,default-trigger = "heartbeat";
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Read parameters */
-	devbus,bus-width    = <8>;
-	devbus,turn-off-ps  = <90000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <186000>;
-	devbus,acc-next-ps  = <186000>;
-
-	/* Write parameters */
-	devbus,wr-high-ps  = <90000>;
-	devbus,wr-low-ps   = <90000>;
-	devbus,ale-wr-ps   = <90000>;
-
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x80000>;
-		bank-width = <1>;
-	};
-};
-
-&devbus_cs1 {
-	status = "okay";
-
-	/* Read parameters */
-	devbus,bus-width    = <8>;
-	devbus,turn-off-ps  = <90000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <186000>;
-	devbus,acc-next-ps  = <186000>;
-
-	/* Write parameters */
-	devbus,wr-high-ps  = <90000>;
-	devbus,wr-low-ps   = <90000>;
-	devbus,ale-wr-ps   = <90000>;
-
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x1000000>;
-		bank-width = <1>;
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@68 {
-		pinctrl-0 = <&pmx_rtc>;
-		pinctrl-names = "default";
-		compatible = "dallas,ds1338";
-		reg = <0x68>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
-		&pmx_pci_gpios>;
-	pinctrl-names = "default";
-
-	/*
-	 * MPP[20] PCI Clock to MV88F5182
-	 * MPP[21] PCI Clock to mini PCI CON11
-	 * MPP[22] USB 0 over current indication
-	 * MPP[23] USB 1 over current indication
-	 * MPP[24] USB 1 over current enable
-	 * MPP[25] USB 0 over current enable
-	 */
-
-	pmx_debug_led: pmx-debug_led {
-		marvell,pins = "mpp0";
-		marvell,function = "gpio";
-	};
-
-	pmx_reset_switch: pmx-reset-switch {
-		marvell,pins = "mpp1";
-		marvell,function = "gpio";
-	};
-
-	pmx_rtc: pmx-rtc {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_misc_gpios: pmx-misc-gpios {
-		marvell,pins = "mpp4", "mpp5";
-		marvell,function = "gpio";
-	};
-
-	pmx_pci_gpios: pmx-pci-gpios {
-		marvell,pins = "mpp6", "mpp7";
-		marvell,function = "gpio";
-	};
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
deleted file mode 100644
index 2d41f5c166ee7..0000000000000
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ /dev/null
@@ -1,236 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Marvell Orion5x SoC";
-	compatible = "marvell,orion5x";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		gpio0 = &gpio0;
-	};
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-
-		devbus_bootcs: devbus-bootcs {
-			compatible = "marvell,orion-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>;
-			ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs0: devbus-cs0 {
-			compatible = "marvell,orion-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>;
-			ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs1: devbus-cs1 {
-			compatible = "marvell,orion-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>;
-			ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs2: devbus-cs2 {
-			compatible = "marvell,orion-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>;
-			ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			gpio0: gpio@10100 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0x10100 0x40>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <6>, <7>, <8>, <9>;
-			};
-
-			spi: spi@10600 {
-				compatible = "marvell,orion-spi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				reg = <0x10600 0x28>;
-				status = "disabled";
-			};
-
-			i2c: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <5>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart0: serial@12000 {
-				compatible = "ns16550a";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <3>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart1: serial@12100 {
-				compatible = "ns16550a";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <4>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			bridge_intc: bridge-interrupt-ctrl@20110 {
-				compatible = "marvell,orion-bridge-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20110 0x8>;
-				interrupts = <0>;
-				marvell,#interrupts = <4>;
-			};
-
-			intc: interrupt-controller@20200 {
-				compatible = "marvell,orion-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20200 0x08>;
-			};
-
-			timer: timer@20300 {
-				compatible = "marvell,orion-timer";
-				reg = <0x20300 0x20>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <1>, <2>;
-				clocks = <&core_clk 0>;
-			};
-
-			wdt: wdt@20300 {
-				compatible = "marvell,orion-wdt";
-				reg = <0x20300 0x28>, <0x20108 0x4>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <3>;
-				clocks = <&core_clk 0>;
-				status = "okay";
-			};
-
-			ehci0: ehci@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x1000>;
-				interrupts = <17>;
-				status = "disabled";
-			};
-
-			xor: dma-controller@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				status = "okay";
-
-				xor00 {
-				      interrupts = <30>;
-				      dmacap,memcpy;
-				      dmacap,xor;
-				};
-				xor01 {
-				      interrupts = <31>;
-				      dmacap,memcpy;
-				      dmacap,xor;
-				      dmacap,memset;
-				};
-			};
-
-			eth: ethernet-controller@72000 {
-				compatible = "marvell,orion-eth";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72000 0x4000>;
-				marvell,tx-checksum-limit = <1600>;
-				status = "disabled";
-
-				ethport: ethernet-port@0 {
-					compatible = "marvell,orion-eth-port";
-					reg = <0>;
-					interrupts = <21>;
-					/* overwrite MAC address in bootloader */
-					local-mac-address = [00 00 00 00 00 00];
-					/* set phy-handle property in board file */
-				};
-			};
-
-			mdio: mdio-bus@72004 {
-				compatible = "marvell,orion-mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72004 0x84>;
-				interrupts = <22>;
-				status = "disabled";
-
-				/* add phy nodes in board file */
-			};
-
-			sata: sata@80000 {
-				compatible = "marvell,orion-sata";
-				reg = <0x80000 0x5000>;
-				interrupts = <29>;
-				status = "disabled";
-			};
-
-			cesa: crypto@90000 {
-				compatible = "marvell,orion-crypto";
-				reg = <0x90000 0x10000>;
-				reg-names = "regs";
-				interrupts = <28>;
-				marvell,crypto-srams = <&crypto_sram>;
-				marvell,crypto-sram-size = <0x800>;
-				status = "okay";
-			};
-
-			ehci1: ehci@a0000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0xa0000 0x1000>;
-				interrupts = <12>;
-				status = "disabled";
-			};
-		};
-
-		crypto_sram: sa-sram {
-			compatible = "mmio-sram";
-			reg = <MBUS_ID(0x09, 0x00) 0x0 0x800>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/owl-s500-cubieboard6.dts
deleted file mode 100644
index c2b02895910c5..0000000000000
--- a/arch/arm/boot/dts/owl-s500-cubieboard6.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Cubietech CubieBoard6
- *
- * Copyright (c) 2017 Andreas Färber
- */
-
-/dts-v1/;
-
-#include "owl-s500.dtsi"
-
-/ {
-	compatible = "cubietech,cubieboard6", "actions,s500";
-	model = "CubieBoard6";
-
-	aliases {
-		serial3 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial3:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000>;
-	};
-};
-
-&timer {
-	clocks = <&hosc>;
-};
-
-&uart3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
deleted file mode 100644
index 7ae34a23e320d..0000000000000
--- a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016-2017 Andreas Färber
- */
-
-/dts-v1/;
-
-#include "owl-s500-guitar.dtsi"
-
-/ {
-	compatible = "lemaker,guitar-bb-rev-b", "lemaker,guitar", "actions,s500";
-	model = "LeMaker Guitar Base Board rev. B";
-
-	aliases {
-		serial3 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial3:115200n8";
-	};
-};
-
-&uart3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/owl-s500-guitar.dtsi b/arch/arm/boot/dts/owl-s500-guitar.dtsi
deleted file mode 100644
index 81cc39871f17d..0000000000000
--- a/arch/arm/boot/dts/owl-s500-guitar.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * LeMaker Guitar SoM
- *
- * Copyright (c) 2016-2017 Andreas Färber
- */
-
-#include "owl-s500.dtsi"
-
-/ {
-	compatible = "lemaker,guitar", "actions,s500";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;
-	};
-};
-
-&timer {
-	clocks = <&hosc>;
-};
diff --git a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts
deleted file mode 100644
index 1585e33f703ba..0000000000000
--- a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Caninos Labrador Base Board
- *
- * Copyright (c) 2019-2020 Matheus Castello
- */
-
-/dts-v1/;
-
-#include "owl-s500-labrador-v2.dtsi"
-
-/ {
-	model = "Caninos Labrador Core v2 on Labrador Base-M v1";
-	compatible = "caninos,labrador-base-m",
-		     "caninos,labrador-v2", "actions,s500";
-
-	aliases {
-		serial3 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial3:115200n8";
-	};
-};
-
-&uart3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
deleted file mode 100644
index 883ff2f9886d1..0000000000000
--- a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Caninos Labrador SoM V2
- *
- * Copyright (c) 2019-2020 Matheus Castello
- */
-
-#include "owl-s500.dtsi"
-
-/ {
-	model = "Caninos Labrador Core V2.1";
-	compatible = "caninos,labrador-v2", "actions,s500";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000>;
-	};
-};
-
-&timer {
-	clocks = <&hosc>;
-};
diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
deleted file mode 100644
index eb555f3852833..0000000000000
--- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts
+++ /dev/null
@@ -1,299 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Roseapple Pi
- *
- * Copyright (C) 2020-2021 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
- */
-
-/dts-v1/;
-
-#include "owl-s500.dtsi"
-
-/ {
-	compatible = "roseapplepi,roseapplepi", "actions,s500";
-	model = "Roseapple Pi";
-
-	aliases {
-		mmc0 = &mmc0;
-		serial2 = &uart2;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000>; /* 2GB */
-	};
-
-	syspwr: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "SYSPWR";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	atc260x: pmic@65 {
-		compatible = "actions,atc2603c";
-		reg = <0x65>;
-		interrupt-parent = <&sirq>;
-		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-
-		reset-time-sec = <6>;
-
-		regulators {
-			compatible = "actions,atc2603c-regulator";
-
-			dcdc1-supply = <&syspwr>;
-			dcdc2-supply = <&syspwr>;
-			dcdc3-supply = <&syspwr>;
-			ldo1-supply = <&syspwr>;
-			ldo2-supply = <&syspwr>;
-			ldo3-supply = <&syspwr>;
-			ldo5-supply = <&syspwr>;
-			ldo6-supply = <&syspwr>;
-			ldo7-supply = <&syspwr>;
-			ldo8-supply = <&syspwr>;
-			ldo11-supply = <&syspwr>;
-			ldo12-supply = <&syspwr>;
-			switchldo1-supply = <&vcc>;
-
-			vdd_cpu: dcdc1 {
-				regulator-name = "VDD_CPU";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-			};
-
-			vddq: dcdc2 {
-				regulator-name = "VDDQ";
-				regulator-min-microvolt = <1300000>;
-				regulator-max-microvolt = <2150000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vcc: dcdc3 {
-				regulator-name = "VCC";
-				regulator-min-microvolt = <2600000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vcc_3v3: ldo1 {
-				regulator-name = "VCC_3V3";
-				regulator-min-microvolt = <2600000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			avcc: ldo2 {
-				regulator-name = "AVCC";
-				regulator-min-microvolt = <2600000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_1v8: ldo3 {
-				regulator-name = "VDD_1V8";
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			vcc_3v1: ldo5 {
-				regulator-name = "VCC_3V1";
-				regulator-min-microvolt = <2600000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			avdd: ldo6 {
-				regulator-name = "AVDD";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-			};
-
-			sens_1v8: ldo7 {
-				regulator-name = "SENS_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo8: ldo8 {
-				regulator-name = "LDO8";
-				regulator-min-microvolt = <2300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			svcc: ldo11 {
-				regulator-name = "SVCC";
-				regulator-min-microvolt = <2600000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			rtc_vdd: ldo12 {
-				regulator-name = "RTC_VDD";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			sd_vcc: switchldo1 {
-				regulator-name = "SD_VCC";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&i2c1 {
-	status = "disabled";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-};
-
-&i2c2 {
-	status = "disabled";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-};
-
-&pinctrl {
-	i2c0_pins: i2c0-pins {
-		pinmux {
-			groups = "i2c0_mfp";
-			function = "i2c0";
-		};
-
-		pinconf {
-			pins = "i2c0_sclk", "i2c0_sdata";
-			bias-pull-up;
-		};
-	};
-
-	i2c1_pins: i2c1-pins {
-		pinconf {
-			pins = "i2c1_sclk", "i2c1_sdata";
-			bias-pull-up;
-		};
-	};
-
-	i2c2_pins: i2c2-pins {
-		pinconf {
-			pins = "i2c2_sclk", "i2c2_sdata";
-			bias-pull-up;
-		};
-	};
-
-	mmc0_pins: mmc0-pins {
-		pinmux {
-			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
-				 "sd0_cmd_mfp", "sd0_clk_mfp";
-			function = "sd0";
-		};
-
-		drv-pinconf {
-			groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
-			drive-strength = <8>;
-		};
-
-		bias0-pinconf {
-			pins = "sd0_d0", "sd0_d1", "sd0_d2",
-			       "sd0_d3", "sd0_cmd";
-			bias-pull-up;
-		};
-
-		bias1-pinconf {
-			pins = "sd0_clk";
-			bias-pull-down;
-		};
-	};
-
-	ethernet_pins: ethernet-pins {
-		eth_rmii-pinmux {
-			groups = "rmii_txd0_mfp", "rmii_txd1_mfp",
-				 "rmii_rxd0_mfp", "rmii_rxd1_mfp",
-				 "rmii_txen_mfp", "rmii_rxen_mfp",
-				 "rmii_crs_dv_mfp", "rmii_ref_clk_mfp";
-			function = "eth_rmii";
-		};
-
-		phy_clk-pinmux {
-			groups = "clko_25m_mfp";
-			function = "clko_25m";
-		};
-
-		ref_clk-pinconf {
-			groups = "rmii_ref_clk_drv";
-			drive-strength = <2>;
-		};
-
-	};
-};
-
-/* uSD */
-&mmc0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	no-sdio;
-	no-mmc;
-	no-1-8-v;
-	cd-gpios = <&pinctrl 117 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	vmmc-supply = <&sd_vcc>;
-	vqmmc-supply = <&sd_vcc>;
-};
-
-&ethernet {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet_pins>;
-	phy-mode = "rmii";
-	phy-handle = <&eth_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reset-gpios = <&pinctrl 88 GPIO_ACTIVE_LOW>; /* GPIOC24 */
-		reset-delay-us = <10000>;
-		reset-post-delay-us = <150000>;
-
-		eth_phy: ethernet-phy@3 {
-			reg = <0x3>;
-			max-speed = <100>;
-			interrupt-parent = <&sirq>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
-};
-
-&twd_timer {
-	status = "okay";
-};
-
-&timer {
-	clocks = <&hosc>;
-};
-
-&uart2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/owl-s500-sparky.dts b/arch/arm/boot/dts/owl-s500-sparky.dts
deleted file mode 100644
index 9d8f7336bec04..0000000000000
--- a/arch/arm/boot/dts/owl-s500-sparky.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Allo.com Sparky
- *
- * Copyright (c) 2017 Andreas Färber
- */
-
-/dts-v1/;
-
-#include "owl-s500.dtsi"
-
-/ {
-	compatible = "allo,sparky", "actions,s500";
-	model = "Allo.com Sparky";
-
-	aliases {
-		serial3 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial3:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1 or 2 GiB */
-	};
-};
-
-&timer {
-	clocks = <&hosc>;
-};
-
-&uart3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
deleted file mode 100644
index 739b4b9cec8c5..0000000000000
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ /dev/null
@@ -1,338 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Actions Semi S500 SoC
- *
- * Copyright (c) 2016-2017 Andreas Färber
- */
-
-#include <dt-bindings/clock/actions,s500-cmu.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/owl-s500-powergate.h>
-#include <dt-bindings/reset/actions,s500-reset.h>
-
-/ {
-	compatible = "actions,s500";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-	};
-
-	chosen {
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x0>;
-			enable-method = "actions,s500-smp";
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x1>;
-			enable-method = "actions,s500-smp";
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x2>;
-			enable-method = "actions,s500-smp";
-			power-domains = <&sps S500_PD_CPU2>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x3>;
-			enable-method = "actions,s500-smp";
-			power-domains = <&sps S500_PD_CPU3>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	hosc: hosc {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-	losc: losc {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		#clock-cells = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		scu: scu@b0020000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0xb0020000 0x100>;
-		};
-
-		global_timer: timer@b0020200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0xb0020200 0x100>;
-			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-			status = "disabled";
-		};
-
-		twd_timer: timer@b0020600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xb0020600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-			status = "disabled";
-		};
-
-		twd_wdt: wdt@b0020620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0xb0020620 0xe0>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@b0021000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0xb0021000 0x1000>,
-			      <0xb0020100 0x0100>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-		};
-
-		l2: cache-controller@b0022000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xb0022000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			arm,tag-latency = <3 3 2>;
-			arm,data-latency = <5 3 3>;
-		};
-
-		uart0: serial@b0120000 {
-			compatible = "actions,s500-uart", "actions,owl-uart";
-			reg = <0xb0120000 0x2000>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_UART0>;
-			status = "disabled";
-		};
-
-		uart1: serial@b0122000 {
-			compatible = "actions,s500-uart", "actions,owl-uart";
-			reg = <0xb0122000 0x2000>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_UART1>;
-			status = "disabled";
-		};
-
-		uart2: serial@b0124000 {
-			compatible = "actions,s500-uart", "actions,owl-uart";
-			reg = <0xb0124000 0x2000>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_UART2>;
-			status = "disabled";
-		};
-
-		uart3: serial@b0126000 {
-			compatible = "actions,s500-uart", "actions,owl-uart";
-			reg = <0xb0126000 0x2000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_UART3>;
-			status = "disabled";
-		};
-
-		uart4: serial@b0128000 {
-			compatible = "actions,s500-uart", "actions,owl-uart";
-			reg = <0xb0128000 0x2000>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_UART4>;
-			status = "disabled";
-		};
-
-		uart5: serial@b012a000 {
-			compatible = "actions,s500-uart", "actions,owl-uart";
-			reg = <0xb012a000 0x2000>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_UART5>;
-			status = "disabled";
-		};
-
-		uart6: serial@b012c000 {
-			compatible = "actions,s500-uart", "actions,owl-uart";
-			reg = <0xb012c000 0x2000>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_UART6>;
-			status = "disabled";
-		};
-
-		cmu: clock-controller@b0160000 {
-			compatible = "actions,s500-cmu";
-			reg = <0xb0160000 0x8000>;
-			clocks = <&hosc>, <&losc>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		i2c0: i2c@b0170000 {
-			compatible = "actions,s500-i2c";
-			reg = <0xb0170000 0x4000>;
-			clocks = <&cmu CLK_I2C0>;
-			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@b0174000 {
-			compatible = "actions,s500-i2c";
-			reg = <0xb0174000 0x4000>;
-			clocks = <&cmu CLK_I2C1>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@b0178000 {
-			compatible = "actions,s500-i2c";
-			reg = <0xb0178000 0x4000>;
-			clocks = <&cmu CLK_I2C2>;
-			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@b017c000 {
-			compatible = "actions,s500-i2c";
-			reg = <0xb017c000 0x4000>;
-			clocks = <&cmu CLK_I2C3>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sirq: interrupt-controller@b01b0200 {
-			compatible = "actions,s500-sirq";
-			reg = <0xb01b0200 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */
-		};
-
-		timer: timer@b0168000 {
-			compatible = "actions,s500-timer";
-			reg = <0xb0168000 0x8000>;
-			interrupts = <GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-			             <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-			             <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-			             <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "2hz0", "2hz1", "timer0", "timer1";
-		};
-
-		sps: power-controller@b01b0100 {
-			compatible = "actions,s500-sps";
-			reg = <0xb01b0100 0x100>;
-			#power-domain-cells = <1>;
-		};
-
-		pinctrl: pinctrl@b01b0000 {
-			compatible = "actions,s500-pinctrl";
-			reg = <0xb01b0000 0x40>, /* GPIO */
-			      <0xb01b0040 0x10>, /* Multiplexing Control */
-			      <0xb01b0060 0x18>, /* PAD Control */
-			      <0xb01b0080 0xc>;  /* PAD Drive Capacity */
-			clocks = <&cmu CLK_GPIO>;
-			gpio-controller;
-			gpio-ranges = <&pinctrl 0 0 132>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */
-				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */
-				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */
-				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */
-				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */
-		};
-
-		dma: dma-controller@b0260000 {
-			compatible = "actions,s500-dma";
-			reg = <0xb0260000 0xd00>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			dma-channels = <12>;
-			dma-requests = <46>;
-			clocks = <&cmu CLK_DMAC>;
-			power-domains = <&sps S500_PD_DMA>;
-		};
-
-		mmc0: mmc@b0230000 {
-			compatible = "actions,s500-mmc", "actions,owl-mmc";
-			reg = <0xb0230000 0x38>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_SD0>;
-			resets = <&cmu RESET_SD0>;
-			dmas = <&dma 2>;
-			dma-names = "mmc";
-			status = "disabled";
-		};
-
-		mmc1: mmc@b0234000 {
-			compatible = "actions,s500-mmc", "actions,owl-mmc";
-			reg = <0xb0234000 0x38>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_SD1>;
-			resets = <&cmu RESET_SD1>;
-			dmas = <&dma 3>;
-			dma-names = "mmc";
-			status = "disabled";
-		};
-
-		mmc2: mmc@b0238000 {
-			compatible = "actions,s500-mmc", "actions,owl-mmc";
-			reg = <0xb0238000 0x38>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_SD2>;
-			resets = <&cmu RESET_SD2>;
-			dmas = <&dma 4>;
-			dma-names = "mmc";
-			status = "disabled";
-		};
-
-		ethernet: ethernet@b0310000 {
-			compatible = "actions,s500-emac", "actions,owl-emac";
-			reg = <0xb0310000 0x10000>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>;
-			clock-names = "eth", "rmii";
-			resets = <&cmu RESET_ETHERNET>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
deleted file mode 100644
index c349fd3758a62..0000000000000
--- a/arch/arm/boot/dts/pm9g45.dts
+++ /dev/null
@@ -1,185 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * pm9g45.dts - Device Tree file for Ronetix pm9g45 board
- *
- *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-/dts-v1/;
-#include "at91sam9g45.dtsi"
-
-/ {
-	model = "Ronetix pm9g45";
-	compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@70000000 {
-		reg = <0x70000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-		      clock-frequency = <32768>;
-		};
-
-		main_xtal {
-		      clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@ffffee00 {
-				status = "okay";
-			};
-
-			pinctrl@fffff200 {
-				nand {
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				mmc {
-					pinctrl_board_mmc: mmc0-board {
-						atmel,pins =
-							<AT91_PIOD 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD6 gpio CD pin pull_up and deglitch */
-					};
-				};
-			};
-
-			tcb0: timer@fff7c000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			mmc0: mmc@fff80000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc
-					&pinctrl_mmc0_slot0_clk_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				pinctrl-names = "default";
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			macb0: ethernet@fffbc000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioD 3 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						barebox@20000 {
-							label = "barebox";
-							reg = <0x20000 0x40000>;
-						};
-
-						bareboxenv@60000 {
-							label = "bareboxenv";
-							reg = <0x60000 0x1A0000>;
-						};
-
-						kernel@200000 {
-							label = "bareboxenv2";
-							reg = <0x200000 0x300000>;
-						};
-
-						kernel@500000 {
-							label = "root";
-							reg = <0x500000 0x400000>;
-						};
-
-						data@900000 {
-							label = "data";
-							reg = <0x900000 0x8340000>;
-						};
-					};
-				};
-			};
-		};
-
-		usb0: ohci@700000 {
-			status = "okay";
-			num-ports = <2>;
-		};
-
-		usb1: ehci@800000 {
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 {
-			label = "led0";
-			gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "nand-disk";
-		};
-
-		led1 {
-			label = "led1";
-			gpios = <&pioD 31 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		right {
-			label = "SW4";
-			gpios = <&pioE 7 GPIO_ACTIVE_LOW>;
-			linux,code = <106>;
-		};
-
-		up {
-			label = "SW3";
-			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
-			linux,code = <103>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/pxa168-aspenite.dts
deleted file mode 100644
index 8bade6bf395b3..0000000000000
--- a/arch/arm/boot/dts/pxa168-aspenite.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- */
-
-/dts-v1/;
-#include "pxa168.dtsi"
-
-/ {
-	model = "Marvell PXA168 Aspenite Development Board";
-	compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
-	};
-
-	memory {
-		reg = <0x00000000 0x04000000>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&twsi1 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
deleted file mode 100644
index 16212b912b94e..0000000000000
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- */
-
-#include <dt-bindings/clock/marvell,pxa168.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		i2c0 = &twsi1;
-		i2c1 = &twsi2;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		axi@d4200000 {	/* AXI */
-			compatible = "mrvl,axi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4200000 0x00200000>;
-			ranges;
-
-			intc: interrupt-controller@d4282000 {
-				compatible = "mrvl,mmp-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd4282000 0x1000>;
-				mrvl,intc-nr-irqs = <64>;
-			};
-
-		};
-
-		apb@d4000000 {	/* APB */
-			compatible = "mrvl,apb-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4000000 0x00200000>;
-			ranges;
-
-			timer0: timer@d4014000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4014000 0x100>;
-				interrupts = <13>;
-				clocks = <&soc_clocks PXA168_CLK_TIMER>;
-				resets = <&soc_clocks PXA168_CLK_TIMER>;
-			};
-
-			uart1: serial@d4017000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4017000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <27>;
-				clocks = <&soc_clocks PXA168_CLK_UART0>;
-				resets = <&soc_clocks PXA168_CLK_UART0>;
-				status = "disabled";
-			};
-
-			uart2: serial@d4018000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4018000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <28>;
-				clocks = <&soc_clocks PXA168_CLK_UART1>;
-				resets = <&soc_clocks PXA168_CLK_UART1>;
-				status = "disabled";
-			};
-
-			uart3: serial@d4026000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4026000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <29>;
-				clocks = <&soc_clocks PXA168_CLK_UART2>;
-				resets = <&soc_clocks PXA168_CLK_UART2>;
-				status = "disabled";
-			};
-
-			gpio@d4019000 {
-				compatible = "marvell,mmp-gpio";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xd4019000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupts = <49>;
-				clocks = <&soc_clocks PXA168_CLK_GPIO>;
-				resets = <&soc_clocks PXA168_CLK_GPIO>;
-				interrupt-names = "gpio_mux";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ranges;
-
-				gcb0: gpio@d4019000 {
-					reg = <0xd4019000 0x4>;
-				};
-
-				gcb1: gpio@d4019004 {
-					reg = <0xd4019004 0x4>;
-				};
-
-				gcb2: gpio@d4019008 {
-					reg = <0xd4019008 0x4>;
-				};
-
-				gcb3: gpio@d4019100 {
-					reg = <0xd4019100 0x4>;
-				};
-			};
-
-			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xd4011000 0x1000>;
-				interrupts = <7>;
-				clocks = <&soc_clocks PXA168_CLK_TWSI0>;
-				resets = <&soc_clocks PXA168_CLK_TWSI0>;
-				mrvl,i2c-fast-mode;
-				status = "disabled";
-			};
-
-			twsi2: i2c@d4025000 {
-				compatible = "mrvl,mmp-twsi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xd4025000 0x1000>;
-				interrupts = <58>;
-				clocks = <&soc_clocks PXA168_CLK_TWSI1>;
-				resets = <&soc_clocks PXA168_CLK_TWSI1>;
-				status = "disabled";
-			};
-
-			rtc: rtc@d4010000 {
-				compatible = "mrvl,mmp-rtc";
-				reg = <0xd4010000 0x1000>;
-				interrupts = <5>, <6>;
-				interrupt-names = "rtc 1Hz", "rtc alarm";
-				clocks = <&soc_clocks PXA168_CLK_RTC>;
-				resets = <&soc_clocks PXA168_CLK_RTC>;
-				status = "disabled";
-			};
-		};
-
-		soc_clocks: clocks{
-			compatible = "marvell,pxa168-clock";
-			reg = <0xd4050000 0x1000>,
-			      <0xd4282800 0x400>,
-			      <0xd4015000 0x1000>;
-			reg-names = "mpmu", "apmu", "apbc";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi
deleted file mode 100644
index 5f8300e356adf..0000000000000
--- a/arch/arm/boot/dts/pxa25x.dtsi
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2016 Robert Jarzmik <robert.jarzmik@free.fr>
- */
-#include "pxa2xx.dtsi"
-#include "dt-bindings/clock/pxa-clock.h"
-
-/ {
-	model = "Marvell PXA25x family SoC";
-	compatible = "marvell,pxa250";
-
-	clocks {
-	       /*
-		* The muxing of external clocks/internal dividers for osc* clock
-		* sources has been hidden under the carpet by now.
-		*/
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clks: pxa2xx_clks@41300004 {
-			compatible = "marvell,pxa250-core-clocks";
-			#clock-cells = <1>;
-			status = "okay";
-		};
-
-		/* timer oscillator */
-		clktimer: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency  = <3686400>;
-			clock-output-names = "ostimer";
-		};
-	};
-
-	pxabus {
-		pdma: dma-controller@40000000 {
-			compatible = "marvell,pdma-1.0";
-			reg = <0x40000000 0x10000>;
-			interrupts = <25>;
-			#dma-cells = <2>;
-			/* For backwards compatibility: */
-			#dma-channels = <16>;
-			dma-channels = <16>;
-			#dma-requests = <40>;
-			dma-requests = <40>;
-			status = "okay";
-		};
-
-		pxairq: interrupt-controller@40d00000 {
-			marvell,intc-priority;
-			marvell,intc-nr-irqs = <32>;
-		};
-
-		pinctrl: pinctrl@40e00000 {
-			reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4
-			       0x40f00020 0x10>;
-			compatible = "marvell,pxa25x-pinctrl";
-		};
-
-		gpio: gpio@40e00000 {
-			compatible = "intel,pxa25x-gpio";
-			gpio-ranges = <&pinctrl 0 0 84>;
-			clocks = <&clks CLK_NONE>;
-		};
-
-		pwm0: pwm@40b00000 {
-			compatible = "marvell,pxa250-pwm";
-			reg = <0x40b00000 0x10>;
-			#pwm-cells = <1>;
-			clocks = <&clks CLK_PWM0>;
-		};
-
-		pwm1: pwm@40b00010 {
-			compatible = "marvell,pxa250-pwm";
-			reg = <0x40b00010 0x10>;
-			#pwm-cells = <1>;
-			clocks = <&clks CLK_PWM1>;
-		};
-
-		rtc@40900000 {
-			clocks = <&clks CLK_OSC32k768>;
-		};
-	};
-
-	timer@40a00000 {
-		compatible = "marvell,pxa-timer";
-		reg = <0x40a00000 0x20>;
-		interrupts = <26>;
-		clocks = <&clktimer>;
-		status = "okay";
-	};
-
-	pxa250_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-
-		opp-99532800 {
-			opp-hz = /bits/ 64 <99532800>;
-			opp-microvolt = <1000000 950000 1650000>;
-			clock-latency-ns = <20>;
-		};
-		opp-199065600 {
-			opp-hz = /bits/ 64 <199065600>;
-			opp-microvolt = <1000000 950000 1650000>;
-			clock-latency-ns = <20>;
-		};
-		opp-298598400 {
-			opp-hz = /bits/ 64 <298598400>;
-			opp-microvolt = <1100000 1045000 1650000>;
-			clock-latency-ns = <20>;
-		};
-		opp-398131200 {
-			opp-hz = /bits/ 64 <398131200>;
-			opp-microvolt = <1300000 1235000 1650000>;
-			clock-latency-ns = <20>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
deleted file mode 100644
index a2cbfb3be6090..0000000000000
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ /dev/null
@@ -1,188 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* The pxa3xx skeleton simply augments the 2xx version */
-#include "pxa2xx.dtsi"
-#include "dt-bindings/clock/pxa-clock.h"
-
-/ {
-	model = "Marvell PXA27x familiy SoC";
-	compatible = "marvell,pxa27x";
-
-	pxabus {
-		pdma: dma-controller@40000000 {
-			compatible = "marvell,pdma-1.0";
-			reg = <0x40000000 0x10000>;
-			interrupts = <25>;
-			#dma-cells = <2>;
-			/* For backwards compatibility: */
-			#dma-channels = <32>;
-			dma-channels = <32>;
-			#dma-requests = <75>;
-			dma-requests = <75>;
-			status = "okay";
-		};
-
-		pxairq: interrupt-controller@40d00000 {
-			marvell,intc-priority;
-			marvell,intc-nr-irqs = <34>;
-		};
-
-		pinctrl: pinctrl@40e00000 {
-			reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4
-			       0x40f00020 0x10>;
-			compatible = "marvell,pxa27x-pinctrl";
-		};
-
-		gpio: gpio@40e00000 {
-			compatible = "intel,pxa27x-gpio";
-			gpio-ranges = <&pinctrl 0 0 128>;
-			clocks = <&clks CLK_NONE>;
-		};
-
-		usb0: usb@4c000000 {
-			compatible = "marvell,pxa-ohci";
-			reg = <0x4c000000 0x10000>;
-			interrupts = <3>;
-			clocks = <&clks CLK_USBHOST>;
-			status = "disabled";
-		};
-
-		pwm0: pwm@40b00000 {
-			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
-			reg = <0x40b00000 0x10>;
-			#pwm-cells = <1>;
-			clocks = <&clks CLK_PWM0>;
-		};
-
-		pwm1: pwm@40b00010 {
-			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
-			reg = <0x40b00010 0x10>;
-			#pwm-cells = <1>;
-			clocks = <&clks CLK_PWM1>;
-		};
-
-		pwm2: pwm@40c00000 {
-			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
-			reg = <0x40c00000 0x10>;
-			#pwm-cells = <1>;
-			clocks = <&clks CLK_PWM0>;
-		};
-
-		pwm3: pwm@40c00010 {
-			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
-			reg = <0x40c00010 0x10>;
-			#pwm-cells = <1>;
-			clocks = <&clks CLK_PWM1>;
-		};
-
-		pwri2c: i2c@40f00180 {
-			compatible = "mrvl,pxa-i2c";
-			reg = <0x40f00180 0x24>;
-			interrupts = <6>;
-			clocks = <&clks CLK_PWRI2C>;
-			#address-cells = <0x1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pxa27x_udc: udc@40600000 {
-			compatible = "marvell,pxa270-udc";
-			reg = <0x40600000 0x10000>;
-			interrupts = <11>;
-			clocks = <&clks CLK_USB>;
-			status = "disabled";
-		};
-
-		keypad: keypad@41500000 {
-			compatible = "marvell,pxa27x-keypad";
-			reg = <0x41500000 0x4c>;
-			interrupts = <4>;
-			clocks = <&clks CLK_KEYPAD>;
-			status = "disabled";
-		};
-
-		pxa_camera: imaging@50000000 {
-			compatible = "marvell,pxa270-qci";
-			reg = <0x50000000 0x1000>;
-			interrupts = <33>;
-			dmas = <&pdma 68 0	/* Y channel */
-				&pdma 69 0	/* U channel */
-				&pdma 70 0>;	/* V channel */
-			dma-names = "CI_Y", "CI_U", "CI_V";
-
-			clocks = <&clks CLK_CAMERA>;
-			clock-names = "ciclk";
-			clock-frequency = <5000000>;
-			clock-output-names = "qci_mclk";
-
-			status = "disabled";
-		};
-
-		rtc@40900000 {
-			clocks = <&clks CLK_OSC32k768>;
-		};
-	};
-
-	clocks {
-	       /*
-		* The muxing of external clocks/internal dividers for osc* clock
-		* sources has been hidden under the carpet by now.
-		*/
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clks: pxa2xx_clks@41300004 {
-			compatible = "marvell,pxa270-clocks";
-			#clock-cells = <1>;
-			status = "okay";
-		};
-	};
-
-	timer@40a00000 {
-		compatible = "marvell,pxa-timer";
-		reg = <0x40a00000 0x20>;
-		interrupts = <26>;
-		clocks = <&clks CLK_OSTIMER>;
-		status = "okay";
-	};
-
-	pxa270_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-
-		opp-104000000 {
-			opp-hz = /bits/ 64 <104000000>;
-			opp-microvolt = <900000 900000 1705000>;
-			clock-latency-ns = <20>;
-		};
-		opp-156000000 {
-			opp-hz = /bits/ 64 <156000000>;
-			opp-microvolt = <1000000 1000000 1705000>;
-			clock-latency-ns = <20>;
-		};
-		opp-208000000 {
-			opp-hz = /bits/ 64 <208000000>;
-			opp-microvolt = <1180000 1180000 1705000>;
-			clock-latency-ns = <20>;
-		};
-		opp-312000000 {
-			opp-hz = /bits/ 64 <312000000>;
-			opp-microvolt = <1250000 1250000 1705000>;
-			clock-latency-ns = <20>;
-		};
-		opp-416000000 {
-			opp-hz = /bits/ 64 <416000000>;
-			opp-microvolt = <1350000 1350000 1705000>;
-			clock-latency-ns = <20>;
-		};
-		opp-520000000 {
-			opp-hz = /bits/ 64 <520000000>;
-			opp-microvolt = <1450000 1450000 1705000>;
-			clock-latency-ns = <20>;
-		};
-		opp-624000000 {
-			opp-hz = /bits/ 64 <624000000>;
-			opp-microvolt = <1550000 1550000 1705000>;
-			clock-latency-ns = <20>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
deleted file mode 100644
index 84154c43fe654..0000000000000
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include "dt-bindings/clock/pxa-clock.h"
-
-#define PMGROUP(pin) #pin
-#define PMMUX(func, pin, af)			\
-	mux- ## func {				\
-		groups = PMGROUP(P ## pin);	\
-		function = #af;			\
-	}
-#define PMMUX_LPM_LOW(func, pin, af)		\
-	mux- ## func {				\
-		groups = PMGROUP(P ## pin);	\
-		function = #af;			\
-		low-power-disable;		\
-	}
-#define PMMUX_LPM_HIGH(func, pin, af)		\
-	mux- ## func {				\
-		groups = PMGROUP(P ## pin);	\
-		function = #af;			\
-		low-power-enable;		\
-	}
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Marvell PXA2xx family SoC";
-	compatible = "marvell,pxa2xx";
-	interrupt-parent = <&pxairq>;
-
-	aliases {
-		serial0 = &ffuart;
-		serial1 = &btuart;
-		serial2 = &stuart;
-		serial3 = &hwuart;
-		i2c0 = &pwri2c;
-		i2c1 = &pxai2c1;
-	};
-
-	cpus {
-		cpu {
-			compatible = "marvell,xscale";
-			device_type = "cpu";
-		};
-	};
-
-	pxabus {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		pxairq: interrupt-controller@40d00000 {
-			#interrupt-cells = <1>;
-			compatible = "marvell,pxa-intc";
-			interrupt-controller;
-			interrupt-parent;
-			marvell,intc-nr-irqs = <32>;
-			reg = <0x40d00000 0xd0>;
-		};
-
-		gpio: gpio@40e00000 {
-			compatible = "mrvl,pxa-gpio";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			reg = <0x40e00000 0x10000>;
-			gpio-controller;
-			#gpio-cells = <0x2>;
-			interrupts = <8>, <9>, <10>;
-			interrupt-names = "gpio0", "gpio1", "gpio_mux";
-			interrupt-controller;
-			#interrupt-cells = <0x2>;
-			ranges;
-
-			gcb0: gpio@40e00000 {
-				reg = <0x40e00000 0x4>;
-			};
-
-			gcb1: gpio@40e00004 {
-				reg = <0x40e00004 0x4>;
-			};
-
-			gcb2: gpio@40e00008 {
-				reg = <0x40e00008 0x4>;
-			};
-			gcb3: gpio@40e0000c {
-				reg = <0x40e0000c 0x4>;
-			};
-		};
-
-		ffuart: serial@40100000 {
-			compatible = "mrvl,pxa-uart";
-			reg = <0x40100000 0x30>;
-			interrupts = <22>;
-			clocks = <&clks CLK_FFUART>;
-			status = "disabled";
-		};
-
-		btuart: serial@40200000 {
-			compatible = "mrvl,pxa-uart";
-			reg = <0x40200000 0x30>;
-			interrupts = <21>;
-			clocks = <&clks CLK_BTUART>;
-			status = "disabled";
-		};
-
-		stuart: serial@40700000 {
-			compatible = "mrvl,pxa-uart";
-			reg = <0x40700000 0x30>;
-			interrupts = <20>;
-			clocks = <&clks CLK_STUART>;
-			status = "disabled";
-		};
-
-		hwuart: serial@41600000 {
-			compatible = "mrvl,pxa-uart";
-			reg = <0x41600000 0x30>;
-			interrupts = <7>;
-			status = "disabled";
-		};
-
-		pxai2c1: i2c@40301680 {
-			compatible = "mrvl,pxa-i2c";
-			reg = <0x40301680 0x30>;
-			interrupts = <18>;
-			clocks = <&clks CLK_I2C>;
-			#address-cells = <0x1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mmc0: mmc@41100000 {
-			compatible = "marvell,pxa-mmc";
-			reg = <0x41100000 0x1000>;
-			interrupts = <23>;
-			clocks = <&clks CLK_MMC>;
-			dmas = <&pdma 21 3
-				&pdma 22 3>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		rtc@40900000 {
-			compatible = "marvell,pxa-rtc";
-			reg = <0x40900000 0x3c>;
-			interrupts = <30 31>;
-		};
-
-		lcdc: lcd-controller@40500000 {
-			compatible = "marvell,pxa2xx-lcdc";
-			reg = <0x44000000 0x10000>;
-			interrupts = <17>;
-			clocks = <&clks CLK_LCD>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
deleted file mode 100644
index 147c99191dc29..0000000000000
--- a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
+++ /dev/null
@@ -1,405 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include "pxa3xx.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	/* Will be overridden by bootloader */
-	hw-revision = <0>;
-
-	chosen {
-		bootargs = "root=ubi0:RootFS rootfstype=ubifs rw ubi.mtd=3";
-		stdout-path = &ffuart;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0xa0000000 0x8000000>;	/* 128 MB */
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3-fixed-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "1v8-fixed-supply";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	reg_va_5v0: regulator-va-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "va-5v0-fixed-supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio 124 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	ssp_dai0: ssp-dai0 {
-		compatible = "mrvl,pxa-ssp-dai";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ssp0_dai_pins>;
-		port = <&ssp1>;
-		#sound-dai-cells = <0>;
-		dmas = <&pdma 13 3
-			&pdma 14 3>;
-		dma-names = "rx", "tx";
-		clock-names = "extclk";
-	};
-
-	ssp_dai1: ssp-dai1 {
-		compatible = "mrvl,pxa-ssp-dai";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ssp1_dai_pins>;
-		port = <&ssp2>;
-		#sound-dai-cells = <0>;
-		dmas = <&pdma 15 3
-			&pdma 16 3>;
-		dma-names = "rx", "tx";
-		clock-names = "extclk";
-	};
-
-	spi: spi {
-		compatible = "spi-gpio";
-		#address-cells = <0x1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi_pins>;
-		gpio-sck = <&gpio 95 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio 98 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio 97 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <
-			&gpio 34 GPIO_ACTIVE_HIGH
-			&gpio 125 GPIO_ACTIVE_HIGH
-			&gpio 96 GPIO_ACTIVE_HIGH
-		>;
-		num-chipselects = <3>;
-
-		dac: dac@2 {
-			compatible = "ti,dac7512";
-			reg = <2>;
-			spi-max-frequency = <1000000>;
-			vcc-supply = <&reg_3v3>;
-		};
-	};
-
-	keys: gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pins>;
-
-		on-off {
-			label = "on_off button";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_F6>;
-		};
-
-		rescue-boot {
-			label = "rescue boot button";
-			gpios = <&gpio 115 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_F4>;
-		};
-
-		setup {
-			label = "setup";
-			gpios = <&gpio 119 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_F3>;
-		};
-	};
-
-	rotary: rotary-encoder {
-		compatible = "rotary-encoder";
-		gpios = <
-			&gpio 19 GPIO_ACTIVE_LOW
-			&gpio 20 GPIO_ACTIVE_HIGH
-		>;
-		linux,axis = <REL_X>;
-		rotary-encoder,relative-axis;
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_a &led_pins_b>;
-
-		left {
-			label = "raumfeld:1";
-			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
-		};
-
-		right {
-			label = "raumfeld:2";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-names = "default";
-		pinctrl-0 = <&poweroff_pins>;
-		gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-	};
-
-	mmc0_pwrseq: mmc-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc0_pwrseq_pins>;
-		reset-gpios = <
-			&gpio 113 GPIO_ACTIVE_LOW	/* W2W_RESET	*/
-			&gpio 114 GPIO_ACTIVE_LOW	/* W2W_PDN	*/
-		>;
-	};
-
-	ethernet: ethernet@10000000 {
-		compatible = "smsc,lan9115";
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc_pins &smsc_bus_pins>;
-		reg = <0x10000000 0x100000>;
-		phy-mode = "mii";
-		interrupt-parent = <&gpio>;
-		interrupts = <40 IRQ_TYPE_EDGE_FALLING>;
-		vdd33a-supply = <&reg_3v3>;
-		vddvario-supply = <&reg_1v8>;
-		reset-gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
-		smsc,irq-push-pull;
-	};
-};
-
-&ffuart {
-	status = "okay";
-};
-
-&pwri2c {
-	status = "okay";
-
-	max8660: regulator@34 {
-		compatible = "maxim,max8660";
-		reg = <0x34>;
-
-		regulators {
-			regulator-v3 {
-				regulator-compatible = "V3(DCDC)";
-				regulator-min-microvolt = <725000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			regulator-v4 {
-				regulator-compatible = "V4(DCDC)";
-				regulator-min-microvolt = <725000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			regulator-v5 {
-				regulator-compatible = "V5(LDO)";
-				regulator-min-microvolt = <1700000>;
-				regulator-max-microvolt = <2000000>;
-			};
-
-			reg_vcc_sdio: regulator-v6 {
-				regulator-compatible = "V6(LDO)";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			regulator-v7 {
-				regulator-compatible = "V7(LDO)";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-		};
-	};
-};
-
-&pxai2c1 {
-	status = "okay";
-	mrvl,i2c-fast-mode;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pxai2c1_pins>;
-};
-
-&ssp1 {
-	status = "okay";
-};
-
-&ssp2 {
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		nand-rb = <0>;
-		nand-ecc-mode = "hw";
-		marvell,nand-keep-config;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "Bootloader";
-				reg = <0x0000000 0xa0000>;
-				read-only;
-			};
-
-			partition@a0000 {
-				label = "BootloaderEnvironment";
-				reg = <0x0a0000 0x20000>;
-			};
-
-			partition@c0000 {
-				label = "BootloaderSplashScreen";
-				reg = <0x0c0000 0x60000>;
-			};
-
-			partition@120000 {
-				label = "UBI";
-				reg = <0x120000 0x7ee0000>;
-			};
-		};
-	};
-};
-
-&usb0 {
-	status = "okay";
-	marvell,enable-port1;
-	marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pxa3xx_ohci_pins>;
-};
-
-&mmc0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	pxa-mmc,detect-delay-ms = <200>;
-	vmmc-supply = <&reg_vcc_sdio>;
-	mmc-pwrseq = <&mmc0_pwrseq>;
-	non-removable;
-	bus-width = <4>;
-};
-
-&pinctrl {
-	poweroff_pins: poweroff-pins {
-		pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
-	};
-
-	led_pins_a: led-pins-a {
-		pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
-	};
-
-	led_pins_b: led-pins-b {
-		pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
-	};
-
-	pxai2c1_pins: pxai2c1-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(21) MFP_AF1	/* I2C_SCL	*/
-			MFP_PIN_PXA300(22) MFP_AF1	/* I2C_SDA	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
-	};
-
-	gpio_keys_pins: gpio-keys-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(14) MFP_AF0	/* on-off	*/
-			MFP_PIN_PXA300(115) MFP_AF0	/* rescue boot	*/
-			MFP_PIN_PXA300(119) MFP_AF0	/* setup	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
-	};
-
-	spi_pins: spi-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(95) MFP_AF0	/* SCK		*/
-			MFP_PIN_PXA300(97) MFP_AF0	/* MOSI		*/
-			MFP_PIN_PXA300(98) MFP_AF0	/* MISO		*/
-			MFP_PIN_PXA300(34) MFP_AF0	/* CS#0		*/
-			MFP_PIN_PXA300(125) MFP_AF0	/* CS#1		*/
-			MFP_PIN_PXA300(96) MFP_AF0	/* CS#2		*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
-	};
-
-	pxa3xx_ohci_pins: pxa3xx-ohci-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300_2(0) MFP_AF1	/* USBHPEN	*/
-			MFP_PIN_PXA300_2(1) MFP_AF1	/* USBHPWR	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
-	};
-
-	smsc_pins: smsc-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(39) MFP_AF0	/* RESET	*/
-			MFP_PIN_PXA300(40) MFP_AF0	/* IRQ		*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
-	};
-
-	smsc_bus_pins: smsc-bus-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(1) MFP_AF1	/* nCS2		*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
-	};
-
-	mmc0_pins: mmc0-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(3) MFP_AF4	/* MMC1_DAT0	*/
-			MFP_PIN_PXA300(4) MFP_AF4	/* MMC1_DAT1	*/
-			MFP_PIN_PXA300(5) MFP_AF4	/* MMC1_DAT2	*/
-			MFP_PIN_PXA300(6) MFP_AF4	/* MMC1_DAT3	*/
-			MFP_PIN_PXA300(7) MFP_AF4	/* MMC1_CLK	*/
-			MFP_PIN_PXA300(8) MFP_AF4	/* MMC1_CMD	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
-	};
-
-	mmc0_pwrseq_pins: mmc0-pwrseq-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(113) MFP_AF0	/* W2W_RESET	*/
-			MFP_PIN_PXA300(114) MFP_AF0	/* W2W_PDN	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
-	};
-
-	ssp0_dai_pins: ssp0-dai-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(85) MFP_AF1	/* SSP1_SCLK	*/
-			MFP_PIN_PXA300(86) MFP_AF1	/* SSP1_FRM	*/
-			MFP_PIN_PXA300(87) MFP_AF1	/* SSP1_TXD	*/
-			MFP_PIN_PXA300(88) MFP_AF1	/* SSP1_RXD	*/
-			MFP_PIN_PXA300(89) MFP_AF1	/* SSP1_EXTCLK	*/
-			MFP_PIN_PXA300(90) MFP_AF1	/* SSP1_SYSCLK	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
-	};
-
-	ssp1_dai_pins: ssp1-dai-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(25) MFP_AF2	/* SSP2_SCLK	*/
-			MFP_PIN_PXA300(26) MFP_AF2	/* SSP2_FRM	*/
-			MFP_PIN_PXA300(27) MFP_AF2	/* SSP2_TXD	*/
-			MFP_PIN_PXA300(29) MFP_AF2	/* SSP2_EXTCLK	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
-	};
-};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-connector.dts b/arch/arm/boot/dts/pxa300-raumfeld-connector.dts
deleted file mode 100644
index 3e9445419e39b..0000000000000
--- a/arch/arm/boot/dts/pxa300-raumfeld-connector.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/dts-v1/;
-
-#include "pxa300-raumfeld-common.dtsi"
-#include "pxa300-raumfeld-tuneable-clock.dtsi"
-
-/ {
-	model = "Raumfeld Connector (PXA3xx)";
-	compatible = "raumfeld,raumfeld-connector-pxa303", "marvell,pxa300";
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Raumfeld Connector";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		simple-audio-card,dai-link@0 {
-			reg = <0>;
-			format = "i2s";
-			bitclock-master = <&dailink_master_analog>;
-			frame-master = <&dailink_master_analog>;
-			mclk-fs = <256>;
-
-			dailink_master_analog: cpu {
-				sound-dai = <&ssp_dai0>;
-			};
-
-			codec {
-				sound-dai = <&cs4270>;
-			};
-		};
-
-		simple-audio-card,dai-link@1 {
-			reg = <1>;
-			format = "i2s";
-			bitclock-master = <&dailink_master_digital>;
-			frame-master = <&dailink_master_digital>;
-			mclk-fs = <256>;
-
-			dailink_master_digital: cpu {
-				sound-dai = <&ssp_dai1>;
-			};
-
-			codec {
-				sound-dai = <&ak4104>;
-			};
-		};
-	};
-};
-
-&ssp1 {
-	status = "okay";
-};
-
-&ssp2 {
-	status = "okay";
-};
-
-&spi {
-	ak4104: optical-transmitter@0 {
-		compatible = "asahi-kasei,ak4104";
-		reg = <0>;
-		vdd-supply = <&reg_3v3>;
-		spi-max-frequency = <5000000>;
-		reset-gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
-		#sound-dai-cells = <0>;
-	};
-};
-
-&rotary {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts
deleted file mode 100644
index 12b15945ac6d1..0000000000000
--- a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts
+++ /dev/null
@@ -1,285 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/dts-v1/;
-
-#include "pxa300-raumfeld-common.dtsi"
-
-/ {
-	model = "Raumfeld Controller (PXA3xx)";
-	compatible = "raumfeld,raumfeld-controller-pxa303", "marvell,pxa300";
-
-	reg_vbatt: regulator-vbatt {
-		compatible = "regulator-fixed";
-		regulator-name = "vbatt-fixed-supply";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-		regulator-always-on;
-	};
-
-	lcd_supply: regulator-va-tft {
-		compatible = "regulator-fixed";
-		regulator-name = "va-tft-fixed-supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&w1_pins>;
-		gpios = <
-			&gpio 126 GPIO_OPEN_DRAIN	/* W1 I/O	*/
-			&gpio 105 GPIO_ACTIVE_HIGH	/* pullup	*/
-		>;
-
-		w1_ds2760: slave-ds2760 {
-			compatible = "maxim,ds2760";
-			power-supplies = <&charger>;
-		};
-	};
-
-	charger: charger {
-		pinctrl-names = "default";
-		pinctrl-0 = <&charger_pins>;
-		compatible = "gpio-charger";
-		charger-type = "mains";
-		gpios = <&gpio 101 GPIO_ACTIVE_LOW>;
-	};
-
-	/*
-	 * One of the following two will be set to "okay" by the bootloader,
-	 * depending on the hardware revision.
-	 */
-	backlight-controller-pwm {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm0_pins>;
-		pwms = <&pwm0 10000>;
-		power-supply = <&reg_vbatt>;
-		status = "disabled";
-
-		brightness-levels = <
-			 0  1  2  3  4  5  6  7  8  9
-			10 11 12 13 14 15 16 17 18 19
-			20 21 22 23 24 25 26 27 28 29
-			30 31 32 33 34 35 36 37 38 39
-			40 41 42 43 44 45 46 47 48 49
-			50 51 52 53 54 55 56 57 58 59
-			60 61 62 63 64 65 66 67 68 69
-			70 71 72 73 74 75 76 77 78 79
-			80 81 82 83 84 85 86 87 88 89
-			90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <100>;
-	};
-
-	backlight-controller {
-		compatible = "lltc,lt3593";
-		pinctrl-names = "default";
-		pinctrl-0 = <&lt3593_pins>;
-		lltc,ctrl-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-
-		led {
-			label = "backlight";
-			default-state = "on";
-		};
-	};
-};
-
-&reg_va_5v0 {
-	status = "disabled";
-};
-
-&ethernet {
-	status = "disabled";
-};
-
-&leds {
-	status = "disabled";
-};
-
-&dac {
-	status = "disabled";
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&keys {
-	pinctrl-0 = <&gpio_keys_pins &dock_detect_pins>;
-	dock-detect {
-		label = "dock detect";
-		gpios = <&gpio 116 GPIO_ACTIVE_LOW>;
-		linux,code = <KEY_F5>;
-	};
-};
-
-&spi {
-	accelerometer@1 {
-		compatible = "st,lis302dl-spi";
-		pinctrl-names = "default";
-		pinctrl-0 = <&lis302_pins>;
-		reg = <1>;
-		spi-max-frequency = <1000000>;
-		interrupt-parent = <&gpio>;
-		interrupts = <104 IRQ_TYPE_EDGE_FALLING>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-	};
-};
-
-&lcdc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdc_pins>;
-	lcd-supply = <&lcd_supply>;
-
-	port {
-		lcdc_out: endpoint {
-			remote-endpoint = <&panel_in>;
-			bus-width = <16>;
-		};
-	};
-
-	panel {
-		compatible = "sharp,lq043t3dx0-panel";
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing {
-				clock-frequency = <9009000>;
-				pixelclk-active = <0>;	/* negative edge */
-				hactive = <480>;
-				vactive = <272>;
-				hsync-len = <41>;
-				hback-porch = <2>;
-				hfront-porch = <1>;
-				vsync-len = <10>;
-				vback-porch = <3>;
-				vfront-porch = <1>;
-			};
-		};
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdc_out>;
-			};
-		};
-	};
-};
-
-&gcu {
-	status = "okay";
-};
-
-&pxai2c1 {
-	touchscreen@a {
-		compatible = "eeti,exc3000-i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&eeti_ts_pins>;
-		reg = <0xa>;
-		interrupt-parent = <&gpio>;
-		interrupts = <32 IRQ_TYPE_EDGE_RISING>;
-		attn-gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
-		touchscreen-inverted-y;
-	};
-};
-
-&pinctrl {
-	lis302_pins: lis302-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(104) MFP_AF0	/* IRQ	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
-	};
-
-	eeti_ts_pins: eeti-ts-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(32) MFP_AF0	/* IRQ */
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
-	};
-
-	lt3593_pins: lt3593-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(17) MFP_AF0	/* Backlight	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
-	};
-
-	pwm0_pins: pwm0-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(17) MFP_AF1	/* PWM	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
-	};
-
-	w1_pins: w1-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(126) MFP_AF0	/* PWM	*/
-			MFP_PIN_PXA300(105) MFP_AF0	/* PWM	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
-	};
-
-	charger_pins: charger_pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(31) MFP_AF0	/* PEN2	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
-		pinctrl-single,bias-pullup = MPF_PULL_UP;
-	};
-
-	dock_detect_pins: dock_detect_pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(116) MFP_AF0	/* DOCK_DETECT	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
-		pinctrl-single,bias-pullup = MPF_PULL_UP;
-	};
-
-	lcdc_pins: lcdc-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(54) MFP_AF1	/* LDD_0	*/
-			MFP_PIN_PXA300(55) MFP_AF1	/* LDD_1	*/
-			MFP_PIN_PXA300(56) MFP_AF1	/* LDD_2	*/
-			MFP_PIN_PXA300(57) MFP_AF1	/* LDD_3	*/
-			MFP_PIN_PXA300(58) MFP_AF1	/* LDD_4	*/
-			MFP_PIN_PXA300(59) MFP_AF1	/* LDD_5	*/
-			MFP_PIN_PXA300(60) MFP_AF1	/* LDD_6	*/
-			MFP_PIN_PXA300(61) MFP_AF1	/* LDD_7	*/
-			MFP_PIN_PXA300(62) MFP_AF1	/* LDD_8	*/
-			MFP_PIN_PXA300(63) MFP_AF1	/* LDD_9	*/
-			MFP_PIN_PXA300(64) MFP_AF1	/* LDD_10	*/
-			MFP_PIN_PXA300(65) MFP_AF1	/* LDD_11	*/
-			MFP_PIN_PXA300(66) MFP_AF1	/* LDD_12	*/
-			MFP_PIN_PXA300(67) MFP_AF1	/* LDD_13	*/
-			MFP_PIN_PXA300(68) MFP_AF1	/* LDD_14	*/
-			MFP_PIN_PXA300(69) MFP_AF1	/* LDD_15	*/
-			MFP_PIN_PXA300(70) MFP_AF1	/* LDD_16	*/
-			MFP_PIN_PXA300(71) MFP_AF1	/* LDD_17	*/
-			MFP_PIN_PXA300(72) MFP_AF1	/* LCD_FCLK	*/
-			MFP_PIN_PXA300(73) MFP_AF1	/* LCD_LCLK	*/
-			MFP_PIN_PXA300(74) MFP_AF1	/* LCD_PCLK	*/
-			MFP_PIN_PXA300(75) MFP_AF1	/* LCD_BIAS	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
-	};
-};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts
deleted file mode 100644
index 5a0f7f17856f3..0000000000000
--- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/dts-v1/;
-
-#include "pxa300-raumfeld-common.dtsi"
-#include "pxa300-raumfeld-tuneable-clock.dtsi"
-
-/ {
-	model = "Raumfeld Speaker L (PXA3xx)";
-	compatible = "raumfeld,raumfeld-speaker-l-pxa303", "marvell,pxa300";
-};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts
deleted file mode 100644
index fa10d896282c4..0000000000000
--- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/dts-v1/;
-
-#include "pxa300-raumfeld-common.dtsi"
-#include "pxa300-raumfeld-tuneable-clock.dtsi"
-
-/ {
-	model = "Raumfeld Speaker M (PXA3xx)";
-	compatible = "raumfeld,raumfeld-speaker-m-pxa303", "marvell,pxa300";
-};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts
deleted file mode 100644
index a70560a8ea920..0000000000000
--- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/dts-v1/;
-
-#include "pxa300-raumfeld-common.dtsi"
-
-/ {
-	model = "Raumfeld Speaker One (PXA3xx)";
-	compatible = "raumfeld,raumfeld-speaker-one-pxa303", "marvell,pxa300";
-
-	wm8782: wm8782 {
-		compatible = "wm8782";
-		#sound-dai-cells = <0>;
-		Vdd-supply = <&reg_3v3>;
-		Vdda-supply = <&reg_va_5v0>;
-	};
-
-	xo_11mhz: oscillator-11mhz {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <11289600>;
-		clock-accuracy = <100>;
-	};
-
-	xo_audio: clock-gate {
-		compatible = "gpio-gate-clock";
-		pinctrlnames = "default";
-		pinctrl-0 = <&xo_audio_pins>;
-		clocks = <&xo_11mhz>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_va_30v0: regulator-va-30v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "va-30v0-fixed-supply";
-		regulator-min-microvolt = <30000000>;
-		regulator-max-microvolt = <30000000>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Raumfeld Speaker";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		simple-audio-card,dai-link@0 {
-			reg = <0>;
-			format = "i2s";
-			bitclock-master = <&dailink_master_analog_out>;
-			frame-master = <&dailink_master_analog_out>;
-			mclk-fs = <256>;
-
-			dailink_master_analog_out: cpu {
-				sound-dai = <&ssp_dai0>;
-			};
-
-			codec {
-				sound-dai = <&sta320>;
-			};
-		};
-
-		simple-audio-card,dai-link@1 {
-			reg = <1>;
-			format = "i2s";
-			bitclock-master = <&dailink_master_analog_in>;
-			frame-master = <&dailink_master_analog_in>;
-			mclk-fs = <256>;
-
-			dailink_master_analog_in: cpu {
-				sound-dai = <&ssp_dai0>;
-			};
-
-			codec {
-				sound-dai = <&wm8782>;
-			};
-		};
-	};
-};
-
-&ssp_dai0 {
-	clocks = <&xo_audio>;
-};
-
-&spi {
-	dac@2 {
-		compatible = "ti,dac7512";
-		reg = <2>;
-		spi-max-frequency = <1000000>;
-		vcc-supply = <&reg_3v3>;
-	};
-};
-
-&rotary {
-	status = "okay";
-};
-
-&pxai2c1 {
-	sta320: codec@1a {
-		compatible = "st,sta32x";
-		reg = <0x1a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sta320_pins>;
-		clocks = <&xo_audio>;
-		clock-names = "xti";
-		reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>;
-		Vdda-supply = <&reg_3v3>;
-		Vdd3-supply = <&reg_3v3>;
-		Vcc-supply = <&reg_va_30v0>;
-		#sound-dai-cells = <0>;
-		st,thermal-warning-adjustment;
-		st,thermal-warning-recovery;
-		st,fault-detect-recovery;
-		st,drop-compensation-ns = <80>;
-		st,max-power-use-mpcc;
-		st,invalid-input-detect-mute;
-		/* 2 (half-bridge) and 1 (full-bridge) on-board power */
-		st,output-conf = /bits/ 8 <0x1>;
-		st,ch1-output-mapping = /bits/ 8 <0>;
-		st,ch2-output-mapping = /bits/ 8 <1>;
-		st,ch3-output-mapping = /bits/ 8 <2>;
-		st,needs_esd_watchdog;
-	};
-};
-
-&pinctrl {
-	xo_audio_pins: xo-audio-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(111) MFP_AF0	/* ENABLE */
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
-	};
-
-	sta320_pins: sta320-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(120) MFP_AF0	/* CODEC_RESET	*/
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
-	};
-};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts
deleted file mode 100644
index 36e20cbf8704b..0000000000000
--- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/dts-v1/;
-
-#include "pxa300-raumfeld-common.dtsi"
-#include "pxa300-raumfeld-tuneable-clock.dtsi"
-
-/ {
-	model = "Raumfeld Speaker S (PXA3xx)";
-	compatible = "raumfeld,raumfeld-speaker-s-pxa303", "marvell,pxa300";
-};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi
deleted file mode 100644
index 561483b93989d..0000000000000
--- a/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/clock/maxim,max9485.h>
-
-/ {
-	xo_27mhz: oscillator-27mhz {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <27000000>;
-		clock-accuracy = <100>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Raumfeld Speaker";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		simple-audio-card,dai-link@0 {
-			reg = <0>;
-			format = "i2s";
-			bitclock-master = <&dailink_master_analog>;
-			frame-master = <&dailink_master_analog>;
-			mclk-fs = <256>;
-
-			dailink_master_analog: cpu {
-				sound-dai = <&ssp_dai0>;
-			};
-
-			codec {
-				sound-dai = <&cs4270>;
-			};
-		};
-	};
-};
-
-&ssp_dai0 {
-	clocks = <&max9485 MAX9485_CLKOUT1>;
-};
-
-&ssp_dai1 {
-	clocks = <&max9485 MAX9485_CLKOUT1>;
-};
-
-&pxai2c1 {
-	cs4270: codec@48 {
-		compatible = "cirrus,cs4270";
-		pinctrl-names = "default";
-		pinctrl-0 = <&cs4270_pins>;
-		reg = <0x48>;
-		va-supply = <&reg_va_5v0>;
-		vd-supply = <&reg_3v3>;
-		vlc-supply = <&reg_3v3>;
-		reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>;
-		#sound-dai-cells = <0>;
-	};
-
-	max9485: clock-generator@63 {
-		compatible = "maxim,max9485";
-		pinctrl-names = "default";
-		pinctrl-0 = <&max9485_pins>;
-		reg = <0x63>;
-		vdd-supply = <&reg_3v3>;
-		clock-names = "xclk";
-		clocks = <&xo_27mhz>;
-		reset-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>;
-		#clock-cells = <1>;
-	};
-};
-
-&pinctrl {
-	cs4270_pins: cs4270-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(120) MFP_AF0	/* RESET */
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
-	};
-
-	max9485_pins: max9485-pins {
-		pinctrl-single,pins = <
-			MFP_PIN_PXA300(111) MFP_AF0	/* RESET */
-		>;
-		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
-	};
-};
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
deleted file mode 100644
index f9c216f918653..0000000000000
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ /dev/null
@@ -1,320 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* The pxa3xx skeleton simply augments the 2xx version */
-#include "pxa2xx.dtsi"
-
-#define MFP_PIN_PXA300(gpio)				\
-	((gpio <= 2) ? (0x00b4 + 4 * gpio) :		\
-	 (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) :	\
-	 (gpio <= 98) ? (0x0400 + 4 * (gpio - 27)) :	\
-	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
-	 0)
-#define MFP_PIN_PXA300_2(gpio)				\
-	((gpio <= 1) ? (0x674 + 4 * gpio) :		\
-	 (gpio <= 6) ? (0x2dc + 4 * gpio) :		\
-	 0)
-
-#define MFP_PIN_PXA310(gpio)				\
-	((gpio <= 2) ? (0x00b4 + 4 * gpio) :		\
-	 (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) :	\
-	 (gpio <= 29) ? (0x0400 + 4 * (gpio - 27)) :	\
-	 (gpio <= 98) ? (0x0418 + 4 * (gpio - 30)) :	\
-	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
-	 (gpio <= 262) ? 0 :				\
-	 (gpio <= 268) ? (0x052c + 4 * (gpio - 263)) :	\
-	 0)
-#define MFP_PIN_PXA310_2(gpio)				\
-	((gpio <= 1) ? (0x674 + 4 * gpio) :		\
-	 (gpio <= 6) ? (0x2dc + 4 * gpio) :		\
-	 (gpio <= 10) ? (0x52c + 4 * gpio) :		\
-	 0)
-
-#define MFP_PIN_PXA320(gpio)				\
-	((gpio <= 4) ? (0x0124 + 4 * gpio) :		\
-	 (gpio <= 9) ? (0x028c + 4 * (gpio - 5)) :	\
-	 (gpio <= 10) ? (0x0458 + 4 * (gpio - 10)) :	\
-	 (gpio <= 26) ? (0x02a0 + 4 * (gpio - 11)) :	\
-	 (gpio <= 48) ? (0x0400 + 4 * (gpio - 27)) :	\
-	 (gpio <= 62) ? (0x045c + 4 * (gpio - 49)) :	\
-	 (gpio <= 73) ? (0x04b4 + 4 * (gpio - 63)) :	\
-	 (gpio <= 98) ? (0x04f0 + 4 * (gpio - 74)) :	\
-	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
-	 0)
-#define MFP_PIN_PXA320_2(gpio)				\
-	((gpio <= 3) ? (0x674 + 4 * gpio) :		\
-	 (gpio <= 5) ? (0x284 + 4 * gpio) :		\
-	 0)
-
-/*
- * MFP Alternate functions for pins having a gpio.
- * Example of use: pinctrl-single,pins = < MFP_PIN_PXA310(21) MFP_AF1 >
- */
-#define MFP_AF0		(0 << 0)
-#define MFP_AF1		(1 << 0)
-#define MFP_AF2		(2 << 0)
-#define MFP_AF3		(3 << 0)
-#define MFP_AF4		(4 << 0)
-#define MFP_AF5		(5 << 0)
-#define MFP_AF6		(6 << 0)
-
-/*
- * MFP drive strength functions for pins.
- * Example of use: pinctrl-single,drive-strength = MFP_DS03X;
- */
-#define MFP_DSMSK	(0x7 << 10)
-#define MFP_DS01X	< (0x0 << 10) MFP_DSMSK >
-#define MFP_DS02X	< (0x1 << 10) MFP_DSMSK >
-#define MFP_DS03X	< (0x2 << 10) MFP_DSMSK >
-#define MFP_DS04X	< (0x3 << 10) MFP_DSMSK >
-#define MFP_DS06X	< (0x4 << 10) MFP_DSMSK >
-#define MFP_DS08X	< (0x5 << 10) MFP_DSMSK >
-#define MFP_DS10X	< (0x6 << 10) MFP_DSMSK >
-#define MFP_DS13X	< (0x7 << 10) MFP_DSMSK >
-
-/*
- * MFP bias pull mode for pins.
- * Example of use: pinctrl-single,bias-pullup = MPF_PULL_UP;
- */
-#define MPF_PULL_MSK	(0x7 << 13)
-#define MPF_PULL_DOWN	< (0x5 << 13) (0x5 << 13) 0 MPF_PULL_MSK >
-#define MPF_PULL_UP	< (0x6 << 13) (0x6 << 13) 0 MPF_PULL_MSK >
-
-/*
- * MFP low power mode for pins.
- * Example of use:
- *   pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL);
- *
- * Table that determines the low power modes outputs, with actual settings
- * used in parentheses for don't-care values. Except for the float output,
- * the configured driven and pulled levels match, so if there is a need for
- * non-LPM pulled output, the same configuration could probably be used.
- *
- * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
- *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
- *
- * Input            0          X(0)        X(0)        X(0)       0
- * Drive 0          0          0           0           X(1)       0
- * Drive 1          0          1           X(1)        0	  0
- * Pull hi (1)      1          X(1)        1           0	  0
- * Pull lo (0)      1          X(0)        0           1	  0
- * Z (float)        1          X(0)        0           0	  0
- */
-#define MFP_LPM(x)		< (x) MFP_LPM_MSK >
-
-#define MFP_LPM_MSK		0xe1f0
-#define MFP_LPM_INPUT		0x0000
-#define MFP_LPM_DRIVE_LOW	0x2000
-#define MFP_LPM_DRIVE_HIGH	0x4100
-#define MFP_LPM_PULL_LOW	0x2080
-#define MFP_LPM_PULL_HIGH	0x4180
-#define MFP_LPM_FLOAT		0x0080
-
-#define MFP_LPM_EDGE_NONE	0x0000
-#define MFP_LPM_EDGE_RISE	0x0010
-#define MFP_LPM_EDGE_FALL	0x0020
-#define MFP_LPM_EDGE_BOTH	0x0030
-
-/ {
-	model = "Marvell PXA3xx familiy SoC";
-	compatible = "marvell,pxa3xx";
-
-	pxabus {
-		pdma: dma-controller@40000000 {
-			compatible = "marvell,pdma-1.0";
-			reg = <0x40000000 0x10000>;
-			interrupts = <25>;
-			#dma-cells = <2>;
-			/* For backwards compatibility: */
-			#dma-channels = <32>;
-			dma-channels = <32>;
-			#dma-requests = <100>;
-			dma-requests = <100>;
-			status = "okay";
-		};
-
-		pwri2c: i2c@40f500c0 {
-			compatible = "mrvl,pwri2c";
-			reg = <0x40f500c0 0x30>;
-			interrupts = <6>;
-			clocks = <&clks CLK_PWRI2C>;
-			#address-cells = <0x1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		nand_controller: nand-controller@43100000 {
-			compatible = "marvell,pxa3xx-nand-controller";
-			reg = <0x43100000 90>;
-			interrupts = <45>;
-			clocks = <&clks CLK_NAND>;
-			clock-names = "core";
-			dmas = <&pdma 97 3>;
-			dma-names = "data";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pxairq: interrupt-controller@40d00000 {
-			marvell,intc-priority;
-			marvell,intc-nr-irqs = <56>;
-		};
-
-		pinctrl: pinctrl@40e10000 {
-			compatible = "pinconf-single";
-			reg = <0x40e10000 0xffff>;
-			#pinctrl-cells = <1>;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0x7>;
-		};
-
-		gpio: gpio@40e00000 {
-			compatible = "intel,pxa3xx-gpio";
-			reg = <0x40e00000 0x10000>;
-			clocks = <&clks CLK_GPIO>;
-			gpio-ranges = <&pinctrl 0 0 128>;
-			interrupt-names = "gpio0", "gpio1", "gpio_mux";
-			interrupts = <8>, <9>, <10>;
-			gpio-controller;
-			#gpio-cells = <0x2>;
-			interrupt-controller;
-			#interrupt-cells = <0x2>;
-		};
-
-		mmc0: mmc@41100000 {
-			compatible = "marvell,pxa-mmc";
-			reg = <0x41100000 0x1000>;
-			interrupts = <23>;
-			clocks = <&clks CLK_MMC1>;
-			dmas = <&pdma 21 3
-				&pdma 22 3>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		mmc1: mmc@42000000 {
-			compatible = "marvell,pxa-mmc";
-			reg = <0x42000000 0x1000>;
-			interrupts = <41>;
-			clocks = <&clks CLK_MMC2>;
-			dmas = <&pdma 93 3
-				&pdma 94 3>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		mmc2: mmc@42500000 {
-			compatible = "marvell,pxa-mmc";
-			reg = <0x42500000 0x1000>;
-			interrupts = <55>;
-			clocks = <&clks CLK_MMC3>;
-			dmas = <&pdma 46 3
-				&pdma 47 3>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		usb0: usb@4c000000 {
-			compatible = "marvell,pxa-ohci";
-			reg = <0x4c000000 0x10000>;
-			interrupts = <3>;
-			clocks = <&clks CLK_USBH>;
-			status = "disabled";
-		};
-
-		pwm0: pwm@40b00000 {
-			compatible = "marvell,pxa270-pwm";
-			reg = <0x40b00000 0x10>;
-			#pwm-cells = <1>;
-			clocks = <&clks CLK_PWM0>;
-			status = "disabled";
-		};
-
-		pwm1: pwm@40b00010 {
-			compatible = "marvell,pxa270-pwm";
-			reg = <0x40b00010 0x10>;
-			#pwm-cells = <1>;
-			clocks = <&clks CLK_PWM1>;
-			status = "disabled";
-		};
-
-		pwm2: pwm@40c00000 {
-			compatible = "marvell,pxa270-pwm";
-			reg = <0x40c00000 0x10>;
-			#pwm-cells = <1>;
-			clocks = <&clks CLK_PWM0>;
-			status = "disabled";
-		};
-
-		pwm3: pwm@40c00010 {
-			compatible = "marvell,pxa270-pwm";
-			reg = <0x40c00010 0x10>;
-			#pwm-cells = <1>;
-			clocks = <&clks CLK_PWM1>;
-			status = "disabled";
-		};
-
-		ssp1: ssp@41000000 {
-			compatible = "mrvl,pxa3xx-ssp";
-			reg = <0x41000000 0x40>;
-			interrupts = <24>;
-			clocks = <&clks CLK_SSP1>;
-			status = "disabled";
-		};
-
-		ssp2: ssp@41700000 {
-			compatible = "mrvl,pxa3xx-ssp";
-			reg = <0x41700000 0x40>;
-			interrupts = <16>;
-			clocks = <&clks CLK_SSP2>;
-			status = "disabled";
-		};
-
-		ssp3: ssp@41900000 {
-			compatible = "mrvl,pxa3xx-ssp";
-			reg = <0x41900000 0x40>;
-			interrupts = <0>;
-			clocks = <&clks CLK_SSP3>;
-			status = "disabled";
-		};
-
-		ssp4: ssp@41a00000 {
-			compatible = "mrvl,pxa3xx-ssp";
-			reg = <0x41a00000 0x40>;
-			interrupts = <13>;
-			clocks = <&clks CLK_SSP4>;
-			status = "disabled";
-		};
-
-		timer@40a00000 {
-			compatible = "marvell,pxa-timer";
-			reg = <0x40a00000 0x20>;
-			interrupts = <26>;
-			clocks = <&clks CLK_OSTIMER>;
-			status = "okay";
-		};
-
-		gcu: display-controller@54000000 {
-			compatible = "marvell,pxa300-gcu";
-			reg = <0x54000000 0x1000>;
-			interrupts = <39>;
-			clocks = <&clks CLK_PXA300_GCU>;
-			status = "disabled";
-		};
-	};
-
-	clocks {
-	       /*
-		* The muxing of external clocks/internal dividers for osc* clock
-		* sources has been hidden under the carpet by now.
-		*/
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clks: clocks {
-			compatible = "marvell,pxa300-clocks";
-			#clock-cells = <1>;
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts
deleted file mode 100644
index ce76158867c7f..0000000000000
--- a/arch/arm/boot/dts/pxa910-dkb.dts
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- */
-
-/dts-v1/;
-#include "pxa910.dtsi"
-
-/ {
-	model = "Marvell PXA910 DKB Development Board";
-	compatible = "mrvl,pxa910-dkb", "mrvl,pxa910";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
-	};
-
-	memory {
-		reg = <0x00000000 0x10000000>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&twsi1 {
-	status = "okay";
-
-	pmic: 88pm860x@34 {
-		compatible = "marvell,88pm860x";
-		reg = <0x34>;
-		interrupts = <4>;
-		interrupt-parent = <&intc>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		marvell,88pm860x-irq-read-clr;
-		marvell,88pm860x-slave-addr = <0x11>;
-
-		regulators {
-			BUCK1 {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			BUCK2 {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			BUCK3 {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-			LDO5 {
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO7 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO8 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO9 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO10 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			LDO12 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-			LDO13 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-			LDO14 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-		rtc {
-			marvell,88pm860x-vrtc = <1>;
-		};
-		touch {
-			marvell,88pm860x-gpadc-prebias = <1>;
-			marvell,88pm860x-gpadc-slot-cycle = <1>;
-			marvell,88pm860x-tsi-prebias = <6>;
-			marvell,88pm860x-pen-prebias = <16>;
-			marvell,88pm860x-pen-prechg = <2>;
-			marvell,88pm860x-resistor-X = <300>;
-		};
-		backlights {
-			backlight-0 {
-				marvell,88pm860x-iset = <4>;
-				marvell,88pm860x-pwm = <3>;
-			};
-			backlight-2 {
-			};
-		};
-		leds {
-			led0-red {
-				marvell,88pm860x-iset = <12>;
-			};
-			led0-green {
-				marvell,88pm860x-iset = <12>;
-			};
-			led0-blue {
-				marvell,88pm860x-iset = <12>;
-			};
-		};
-	};
-};
-
-&rtc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
deleted file mode 100644
index 352a393578103..0000000000000
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- */
-
-#include <dt-bindings/clock/marvell,pxa910.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		i2c0 = &twsi1;
-		i2c1 = &twsi2;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		L2: l2-cache {
-			compatible = "marvell,tauros2-cache";
-			marvell,tauros2-cache-features = <0x3>;
-		};
-
-		axi@d4200000 {	/* AXI */
-			compatible = "mrvl,axi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4200000 0x00200000>;
-			ranges;
-
-			intc: interrupt-controller@d4282000 {
-				compatible = "mrvl,mmp-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd4282000 0x1000>;
-				mrvl,intc-nr-irqs = <64>;
-			};
-
-		};
-
-		apb@d4000000 {	/* APB */
-			compatible = "mrvl,apb-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4000000 0x00200000>;
-			ranges;
-
-			timer0: timer@d4014000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4014000 0x100>;
-				interrupts = <13>;
-			};
-
-			timer1: timer@d4016000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4016000 0x100>;
-				interrupts = <29>;
-				status = "disabled";
-			};
-
-			uart1: serial@d4017000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4017000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <27>;
-				clocks = <&soc_clocks PXA910_CLK_UART0>;
-				resets = <&soc_clocks PXA910_CLK_UART0>;
-				status = "disabled";
-			};
-
-			uart2: serial@d4018000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4018000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <28>;
-				clocks = <&soc_clocks PXA910_CLK_UART1>;
-				resets = <&soc_clocks PXA910_CLK_UART1>;
-				status = "disabled";
-			};
-
-			uart3: serial@d4036000 {
-				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
-				reg = <0xd4036000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <59>;
-				clocks = <&soc_clocks PXA910_CLK_UART2>;
-				resets = <&soc_clocks PXA910_CLK_UART2>;
-				status = "disabled";
-			};
-
-			gpio@d4019000 {
-				compatible = "marvell,mmp-gpio";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xd4019000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupts = <49>;
-				interrupt-names = "gpio_mux";
-				clocks = <&soc_clocks PXA910_CLK_GPIO>;
-				resets = <&soc_clocks PXA910_CLK_GPIO>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ranges;
-
-				gcb0: gpio@d4019000 {
-					reg = <0xd4019000 0x4>;
-				};
-
-				gcb1: gpio@d4019004 {
-					reg = <0xd4019004 0x4>;
-				};
-
-				gcb2: gpio@d4019008 {
-					reg = <0xd4019008 0x4>;
-				};
-
-				gcb3: gpio@d4019100 {
-					reg = <0xd4019100 0x4>;
-				};
-			};
-
-			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xd4011000 0x1000>;
-				interrupts = <7>;
-				clocks = <&soc_clocks PXA910_CLK_TWSI0>;
-				resets = <&soc_clocks PXA910_CLK_TWSI0>;
-				mrvl,i2c-fast-mode;
-				status = "disabled";
-			};
-
-			twsi2: i2c@d4037000 {
-				compatible = "mrvl,mmp-twsi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xd4037000 0x1000>;
-				interrupts = <54>;
-				clocks = <&soc_clocks PXA910_CLK_TWSI1>;
-				resets = <&soc_clocks PXA910_CLK_TWSI1>;
-				status = "disabled";
-			};
-
-			rtc: rtc@d4010000 {
-				compatible = "mrvl,mmp-rtc";
-				reg = <0xd4010000 0x1000>;
-				interrupts = <5>, <6>;
-				interrupt-names = "rtc 1Hz", "rtc alarm";
-				clocks = <&soc_clocks PXA910_CLK_RTC>;
-				resets = <&soc_clocks PXA910_CLK_RTC>;
-				status = "disabled";
-			};
-		};
-
-		soc_clocks: clocks{
-			compatible = "marvell,pxa910-clock";
-			reg = <0xd4050000 0x1000>,
-			      <0xd4282800 0x400>,
-			      <0xd4015000 0x1000>,
-			      <0xd403b000 0x1000>;
-			reg-names = "mpmu", "apmu", "apbc", "apbcp";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8016-sbc.dts b/arch/arm/boot/dts/qcom-apq8016-sbc.dts
deleted file mode 100644
index 4ccd2dca74a25..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8016-sbc.dts
+++ /dev/null
@@ -1,2 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "arm64/qcom/apq8016-sbc.dts"
diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
deleted file mode 100644
index aa0e0e8d2a973..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
+++ /dev/null
@@ -1,298 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
- */
-
-/dts-v1/;
-
-#include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
-
-/delete-node/ &adsp_region;
-
-/ {
-	model = "ASUS ZenWatch 2";
-	compatible = "asus,sparrow", "qcom,apq8026";
-	chassis-type = "watch";
-	qcom,msm-id = <199 0x20000>;
-	qcom,board-id = <8 3005>;
-
-	reserved-memory {
-		sbl_region: sbl@2f00000 {
-			reg = <0x02f00000 0x100000>;
-			no-map;
-		};
-		external_image_region: external-image@3100000 {
-			reg = <0x3100000 0x200000>;
-			no-map;
-		};
-		peripheral_region: peripheral@3300000 {
-			reg = <0x3300000 0x600000>;
-			no-map;
-		};
-		adsp_region: adsp@3900000 {
-			reg = <0x3900000 0x1400000>;
-			no-map;
-		};
-		modem_region: modem@4d00000 {
-			reg = <0x4d00000 0x1b00000>;
-			no-map;
-		};
-		modem_efs_region: modem-efs@7f00000 {
-			reg = <0x7f00000 0x100000>;
-			no-map;
-		};
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <2950000>;
-		regulator-max-microvolt = <2950000>;
-
-		gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_regulator_default_state>;
-	};
-};
-
-&adsp {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&blsp1_uart1_default_state>;
-
-	bluetooth {
-		compatible = "brcm,bcm43430a1-bt";
-		max-speed = <3000000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&bluetooth_default_state>;
-
-		host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&pm8226_vib {
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-pm8226-regulators";
-
-		pm8226_s3: s3 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1300000>;
-		};
-		pm8226_s4: s4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2200000>;
-		};
-		pm8226_s5: s5 {
-			regulator-min-microvolt = <1150000>;
-			regulator-max-microvolt = <1150000>;
-		};
-
-		pm8226_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-		pm8226_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-		pm8226_l3: l3 {
-			regulator-min-microvolt = <750000>;
-			regulator-max-microvolt = <1337500>;
-		};
-		pm8226_l4: l4 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-		pm8226_l5: l5 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-		pm8226_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		pm8226_l7: l7 {
-			regulator-min-microvolt = <1900000>;
-			regulator-max-microvolt = <1900000>;
-		};
-		pm8226_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		pm8226_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		pm8226_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		pm8226_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		pm8226_l14: l14 {
-			regulator-min-microvolt = <2750000>;
-			regulator-max-microvolt = <2750000>;
-		};
-		pm8226_l15: l15 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-		pm8226_l16: l16 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-		pm8226_l17: l17 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-		};
-		pm8226_l18: l18 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-		};
-		pm8226_l19: l19 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-		pm8226_l20: l20 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-		pm8226_l21: l21 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-		pm8226_l22: l22 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-		pm8226_l23: l23 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		pm8226_l24: l24 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1350000>;
-		};
-		pm8226_l25: l25 {
-			regulator-min-microvolt = <1775000>;
-			regulator-max-microvolt = <2125000>;
-		};
-		pm8226_l26: l26 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-		pm8226_l27: l27 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-		pm8226_l28: l28 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_lvs1: lvs1 {};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pm8226_l17>;
-	vqmmc-supply = <&pm8226_l6>;
-
-	bus-width = <8>;
-	non-removable;
-};
-
-&sdhc_3 {
-	status = "okay";
-
-	max-frequency = <100000000>;
-	non-removable;
-
-	vmmc-supply = <&vreg_wlan>;
-	vqmmc-supply = <&pm8226_l6>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	wifi@1 {
-		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
-		reg = <1>;
-
-		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-names = "host-wake";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_hostwake_default_state>;
-	};
-};
-
-&smbb {
-	qcom,fast-charge-safe-current = <1500000>;
-	qcom,fast-charge-current-limit = <350000>;
-	qcom,fast-charge-safe-voltage = <4430000>;
-	qcom,fast-charge-high-threshold-voltage = <4400000>;
-	qcom,auto-recharge-threshold-voltage = <4300000>;
-	qcom,minimum-input-voltage = <4400000>;
-};
-
-&tlmm {
-	blsp1_uart1_default_state: blsp1-uart1-default-state {
-		pins = "gpio0", "gpio1", "gpio2", "gpio3";
-		function = "blsp_uart1";
-		drive-strength = <8>;
-		bias-disable;
-	};
-
-	bluetooth_default_state: bluetooth-default-state {
-		pins = "gpio48", "gpio61";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-disable;
-	};
-
-	wlan_hostwake_default_state: wlan-hostwake-default-state {
-		pins = "gpio46";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	wlan_regulator_default_state: wlan-regulator-default-state {
-		pins = "gpio35";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-};
-
-&usb {
-	status = "okay";
-	extcon = <&smbb>;
-	dr_mode = "peripheral";
-};
-
-&usb_hs_phy {
-	extcon = <&smbb>;
-	v1p8-supply = <&pm8226_l10>;
-	v3p3-supply = <&pm8226_l20>;
-};
diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
deleted file mode 100644
index 5593a3a60d6c4..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
+++ /dev/null
@@ -1,375 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
- */
-
-/dts-v1/;
-
-#include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
-
-/delete-node/ &adsp_region;
-
-/ {
-	model = "Huawei Watch";
-	compatible = "huawei,sturgeon", "qcom,apq8026";
-	chassis-type = "watch";
-	qcom,msm-id = <199 0x20000>;
-	qcom,board-id = <8 4>;
-
-	reserved-memory {
-		sbl_region: sbl@2f00000 {
-			reg = <0x02f00000 0x100000>;
-			no-map;
-		};
-
-		external_image_region: external-image@3100000 {
-			reg = <0x3100000 0x200000>;
-			no-map;
-		};
-
-		peripheral_region: peripheral@3300000 {
-			reg = <0x3300000 0x600000>;
-			no-map;
-		};
-
-		adsp_region: adsp@3900000 {
-			reg = <0x3900000 0x1400000>;
-			no-map;
-		};
-
-		modem_region: modem@4d00000 {
-			reg = <0x4d00000 0x1b00000>;
-			no-map;
-		};
-
-		modem_efs_region: modem-efs@7f00000 {
-			reg = <0x7f00000 0x100000>;
-			no-map;
-		};
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <2950000>;
-		regulator-max-microvolt = <2950000>;
-
-		gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_regulator_default_state>;
-	};
-};
-
-&adsp {
-	status = "okay";
-};
-
-&blsp1_i2c5 {
-	clock-frequency = <384000>;
-
-	status = "okay";
-
-	touchscreen@20 {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x20>;
-
-		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
-		vdd-supply = <&pm8226_l19>;
-		vio-supply = <&pm8226_lvs1>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_default_state>;
-
-		syna,startup-delay-ms = <160>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f12@12 {
-			reg = <0x12>;
-			syna,sensor-type = <1>;
-		};
-	};
-};
-
-&blsp1_uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&blsp1_uart4_default_state>;
-
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43430a0-bt";
-		max-speed = <3000000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&bluetooth_default_state>;
-
-		host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-pm8226-regulators";
-
-		pm8226_s3: s3 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pm8226_s4: s4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2200000>;
-		};
-
-		pm8226_s5: s5 {
-			regulator-min-microvolt = <1150000>;
-			regulator-max-microvolt = <1150000>;
-		};
-
-		pm8226_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8226_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8226_l3: l3 {
-			regulator-min-microvolt = <750000>;
-			regulator-max-microvolt = <1337500>;
-		};
-
-		pm8226_l4: l4 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8226_l5: l5 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8226_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_l7: l7 {
-			regulator-min-microvolt = <1850000>;
-			regulator-max-microvolt = <1850000>;
-		};
-
-		pm8226_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_l9: l9 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8226_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_l14: l14 {
-			regulator-min-microvolt = <2750000>;
-			regulator-max-microvolt = <2750000>;
-		};
-
-		pm8226_l15: l15 {
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-
-		pm8226_l16: l16 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3350000>;
-		};
-
-		pm8226_l17: l17 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_l18: l18 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_l19: l19 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8226_l20: l20 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-
-		pm8226_l21: l21 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_l22: l22 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_l23: l23 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_l24: l24 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1350000>;
-		};
-
-		pm8226_l25: l25 {
-			regulator-min-microvolt = <1775000>;
-			regulator-max-microvolt = <2125000>;
-		};
-
-		pm8226_l26: l26 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8226_l27: l27 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8226_l28: l28 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_lvs1: lvs1 {};
-	};
-};
-
-&sdhc_1 {
-	vmmc-supply = <&pm8226_l17>;
-	vqmmc-supply = <&pm8226_l6>;
-
-	bus-width = <8>;
-	non-removable;
-
-	status = "okay";
-};
-
-&sdhc_3 {
-	max-frequency = <100000000>;
-	non-removable;
-
-	vmmc-supply = <&vreg_wlan>;
-	vqmmc-supply = <&pm8226_l6>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	status = "okay";
-
-	wifi@1 {
-		compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
-		reg = <1>;
-
-		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-names = "host-wake";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_hostwake_default_state>;
-	};
-};
-
-&smbb {
-	qcom,fast-charge-safe-voltage = <4370000>;
-	qcom,fast-charge-high-threshold-voltage = <4350000>;
-	qcom,minimum-input-voltage = <4350000>;
-	qcom,fast-charge-current-limit = <300000>;
-	qcom,fast-charge-safe-current = <600000>;
-	qcom,auto-recharge-threshold-voltage = <4240000>;
-};
-
-&tlmm {
-	blsp1_uart4_default_state: blsp1-uart4-default-state {
-		pins = "gpio12", "gpio13", "gpio14", "gpio15";
-		function = "blsp_uart4";
-		drive-strength = <8>;
-		bias-disable;
-	};
-
-	bluetooth_default_state: bluetooth-default-state {
-		pins = "gpio63", "gpio64";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	touch_default_state: touch-default-state {
-		irq-pins {
-			pins = "gpio17";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		reset-pins {
-			pins = "gpio16";
-			function = "gpio";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-	};
-
-	wlan_hostwake_default_state: wlan-hostwake-default-state {
-		pins = "gpio66";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	wlan_regulator_default_state: wlan-regulator-default-state {
-		pins = "gpio110";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-};
-
-&usb {
-	extcon = <&smbb>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb_hs_phy {
-	extcon = <&smbb>;
-	v1p8-supply = <&pm8226_l10>;
-	v3p3-supply = <&pm8226_l20>;
-};
diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
deleted file mode 100644
index b887e5361ec3a..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ /dev/null
@@ -1,356 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
- */
-
-/dts-v1/;
-
-#include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
-
-/delete-node/ &adsp_region;
-
-/ {
-	model = "LG G Watch R";
-	compatible = "lg,lenok", "qcom,apq8026";
-	chassis-type = "watch";
-	qcom,board-id = <132 0x0a>;
-	qcom,msm-id = <199 0x20000>;
-
-	aliases {
-		serial0 = &blsp1_uart3;
-		serial1 = &blsp1_uart4;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		sbl_region: sbl@2f00000 {
-			reg = <0x02f00000 0x100000>;
-			no-map;
-		};
-
-		external_image_region: external-image@3100000 {
-			reg = <0x03100000 0x200000>;
-			no-map;
-		};
-
-		adsp_region: adsp@3300000 {
-			reg = <0x03300000 0x1400000>;
-			no-map;
-		};
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <2950000>;
-		regulator-max-microvolt = <2950000>;
-
-		gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_regulator_default_state>;
-	};
-};
-
-&adsp {
-	status = "okay";
-};
-
-&blsp1_i2c1 {
-	status = "okay";
-
-	fuel-gauge@55 {
-		compatible = "ti,bq27421";
-		reg = <0x55>;
-	};
-};
-
-&blsp1_i2c5 {
-	status = "okay";
-	clock-frequency = <384000>;
-
-	touchscreen@20 {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x20>;
-
-		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
-		vdd-supply = <&pm8226_l15>;
-		vio-supply = <&pm8226_l22>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_pins>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f12@12 {
-			reg = <0x12>;
-			syna,sensor-type = <1>;
-		};
-	};
-};
-
-&blsp1_uart3 {
-	status = "okay";
-};
-
-&blsp1_uart4 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&blsp1_uart4_default_state>;
-
-	bluetooth {
-		compatible = "brcm,bcm43430a0-bt";
-
-		max-speed = <3000000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&bluetooth_default_state>;
-
-		host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-pm8226-regulators";
-
-		pm8226_s3: s3 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1350000>;
-		};
-		pm8226_s4: s4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2200000>;
-		};
-		pm8226_s5: s5 {
-			regulator-min-microvolt = <1150000>;
-			regulator-max-microvolt = <1150000>;
-		};
-
-		pm8226_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-		pm8226_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-		pm8226_l3: l3 {
-			regulator-min-microvolt = <750000>;
-			regulator-max-microvolt = <1337500>;
-		};
-		pm8226_l4: l4 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-		pm8226_l5: l5 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-		pm8226_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		pm8226_l7: l7 {
-			regulator-min-microvolt = <1850000>;
-			regulator-max-microvolt = <1850000>;
-		};
-		pm8226_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		pm8226_l9: l9 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-		pm8226_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		pm8226_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		pm8226_l14: l14 {
-			regulator-min-microvolt = <2750000>;
-			regulator-max-microvolt = <2750000>;
-		};
-		pm8226_l15: l15 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-		pm8226_l16: l16 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3350000>;
-		};
-		pm8226_l17: l17 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-		};
-		pm8226_l18: l18 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3300000>;
-		};
-		pm8226_l19: l19 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-		pm8226_l20: l20 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-		pm8226_l21: l21 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-		pm8226_l22: l22 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		pm8226_l23: l23 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-		pm8226_l24: l24 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1350000>;
-		};
-		pm8226_l25: l25 {
-			regulator-min-microvolt = <1775000>;
-			regulator-max-microvolt = <2125000>;
-		};
-		pm8226_l26: l26 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-		pm8226_l27: l27 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-		pm8226_l28: l28 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8226_lvs1: lvs1 {};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pm8226_l17>;
-	vqmmc-supply = <&pm8226_l6>;
-
-	bus-width = <8>;
-	non-removable;
-};
-
-&sdhc_3 {
-	status = "okay";
-
-	max-frequency = <100000000>;
-	non-removable;
-
-	vmmc-supply = <&vreg_wlan>;
-	vqmmc-supply = <&pm8226_l6>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	wifi@1 {
-		compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
-		reg = <1>;
-
-		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-names = "host-wake";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_hostwake_default_state>;
-	};
-};
-
-&smbb {
-	qcom,fast-charge-safe-current = <450000>;
-	qcom,fast-charge-current-limit = <400000>;
-	qcom,fast-charge-safe-voltage = <4350000>;
-	qcom,fast-charge-high-threshold-voltage = <4350000>;
-	qcom,auto-recharge-threshold-voltage = <4240000>;
-	qcom,minimum-input-voltage = <4450000>;
-};
-
-&tlmm {
-	blsp1_uart4_default_state: blsp1-uart4-default-state {
-		pins = "gpio12", "gpio13", "gpio14", "gpio15";
-		function = "blsp_uart4";
-		drive-strength = <8>;
-		bias-disable;
-	};
-
-	bluetooth_default_state: bluetooth-default-state {
-		pins = "gpio47", "gpio48";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	touch_pins: touch-state {
-		irq-pins {
-			pins = "gpio17";
-			function = "gpio";
-
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		reset-pins {
-			pins = "gpio16";
-			function = "gpio";
-
-			drive-strength = <8>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	wlan_hostwake_default_state: wlan-hostwake-default-state {
-		pins = "gpio37";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	wlan_regulator_default_state: wlan-regulator-default-state {
-		pins = "gpio46";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-};
-
-&usb {
-	status = "okay";
-	extcon = <&smbb>;
-	dr_mode = "peripheral";
-};
-
-&usb_hs_phy {
-	extcon = <&smbb>;
-	v1p8-supply = <&pm8226_l10>;
-	v3p3-supply = <&pm8226_l20>;
-};
diff --git a/arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts
deleted file mode 100644
index 91b860e24681f..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts
+++ /dev/null
@@ -1,520 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
-
-/delete-node/ &adsp_region;
-/delete-node/ &smem_region;
-
-/ {
-	model = "Samsung Galaxy Tab 4 10.1";
-	compatible = "samsung,matisse-wifi", "qcom,apq8026";
-	chassis-type = "tablet";
-
-	aliases {
-		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
-		mmc1 = &sdhc_2; /* SDC2 SD card slot */
-		display0 = &framebuffer0;
-	};
-
-	chosen {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		stdout-path = "display0";
-
-		framebuffer0: framebuffer@3200000 {
-			compatible = "simple-framebuffer";
-			reg = <0x03200000 0x800000>;
-			width = <1280>;
-			height = <800>;
-			stride = <(1280 * 3)>;
-			format = "r8g8b8";
-		};
-	};
-
-	gpio-hall-sensor {
-		compatible = "gpio-keys";
-
-		event-hall-sensor {
-			label = "Hall Effect Sensor";
-			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
-			interrupts = <&tlmm 110 IRQ_TYPE_EDGE_FALLING>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			debounce-interval = <15>;
-			wakeup-source;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		key-home {
-			label = "Home";
-			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOMEPAGE>;
-			debounce-interval = <15>;
-		};
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <15>;
-		};
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <15>;
-		};
-	};
-
-	i2c-backlight {
-		compatible = "i2c-gpio";
-		sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-
-		pinctrl-0 = <&backlight_i2c_default_state>;
-		pinctrl-names = "default";
-
-		i2c-gpio,delay-us = <4>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		backlight@2c {
-			compatible = "ti,lp8556";
-			reg = <0x2c>;
-
-			dev-ctrl = /bits/ 8 <0x80>;
-			init-brt = /bits/ 8 <0x3f>;
-			pwm-period = <100000>;
-
-			pwms = <&backlight_pwm 0 100000>;
-			pwm-names = "lp8556";
-
-			rom-a0h {
-				rom-addr = /bits/ 8 <0xa0>;
-				rom-val = /bits/ 8 <0x44>;
-			};
-
-			rom-a1h {
-				rom-addr = /bits/ 8 <0xa1>;
-				rom-val = /bits/ 8 <0x6c>;
-			};
-
-			rom-a5h {
-				rom-addr = /bits/ 8 <0xa5>;
-				rom-val = /bits/ 8 <0x24>;
-			};
-		};
-	};
-
-	backlight_pwm: pwm {
-		compatible = "clk-pwm";
-		#pwm-cells = <2>;
-		clocks = <&mmcc CAMSS_GP0_CLK>;
-		pinctrl-0 = <&backlight_pwm_default_state>;
-		pinctrl-names = "default";
-	};
-
-	reg_tsp_1p8v: regulator-tsp-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "tsp_1p8v";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsp_en_default_state>;
-	};
-
-	reg_tsp_3p3v: regulator-tsp-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "tsp_3p3v";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsp_en1_default_state>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		framebuffer@3200000 {
-			reg = <0x03200000 0x800000>;
-			no-map;
-		};
-
-		mpss@8400000 {
-			reg = <0x08400000 0x1f00000>;
-			no-map;
-		};
-
-		mba@a300000 {
-			reg = <0x0a300000 0x100000>;
-			no-map;
-		};
-
-		reserved@cb00000 {
-			reg = <0x0cb00000 0x700000>;
-			no-map;
-		};
-
-		wcnss@d200000 {
-			reg = <0x0d200000 0x700000>;
-			no-map;
-		};
-
-		adsp_region: adsp@d900000 {
-			reg = <0x0d900000 0x1800000>;
-			no-map;
-		};
-
-		venus@f100000 {
-			reg = <0x0f100000 0x500000>;
-			no-map;
-		};
-
-		smem_region: smem@fa00000 {
-			reg = <0x0fa00000 0x100000>;
-			no-map;
-		};
-
-		reserved@fb00000 {
-			reg = <0x0fb00000 0x260000>;
-			no-map;
-		};
-
-		rfsa@fd60000 {
-			reg = <0x0fd60000 0x20000>;
-			no-map;
-		};
-
-		rmtfs@fd80000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0fd80000 0x180000>;
-			no-map;
-
-			qcom,client-id = <1>;
-		};
-	};
-};
-
-&adsp {
-	status = "okay";
-};
-
-&blsp1_i2c2 {
-	status = "okay";
-
-	accelerometer@1d {
-		compatible = "st,lis2hh12";
-		reg = <0x1d>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&accel_int_default_state>;
-
-		st,drdy-int-pin = <1>;
-
-		vdd-supply = <&pm8226_l19>;
-		vddio-supply = <&pm8226_lvs1>;
-	};
-};
-
-&blsp1_i2c4 {
-	status = "okay";
-
-	muic: usb-switch@25 {
-		compatible = "siliconmitus,sm5502-muic";
-		reg = <0x25>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&muic_int_default_state>;
-	};
-};
-
-&blsp1_i2c5 {
-	status = "okay";
-
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsp_int_rst_default_state>;
-
-		reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>;
-
-		vdd-supply = <&reg_tsp_1p8v>;
-		vdda-supply = <&reg_tsp_3p3v>;
-	};
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-pm8226-regulators";
-
-		pm8226_s3: s3 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pm8226_s4: s4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_s5: s5 {
-			regulator-min-microvolt = <1150000>;
-			regulator-max-microvolt = <1150000>;
-		};
-
-		pm8226_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8226_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8226_l3: l3 {
-			regulator-min-microvolt = <750000>;
-			regulator-max-microvolt = <1337500>;
-			regulator-always-on;
-		};
-
-		pm8226_l4: l4 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8226_l5: l5 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8226_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		pm8226_l7: l7 {
-			regulator-min-microvolt = <1850000>;
-			regulator-max-microvolt = <1850000>;
-		};
-
-		pm8226_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		pm8226_l9: l9 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8226_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_l14: l14 {
-			regulator-min-microvolt = <2750000>;
-			regulator-max-microvolt = <2750000>;
-		};
-
-		pm8226_l15: l15 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pm8226_l16: l16 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3350000>;
-		};
-
-		pm8226_l17: l17 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-			regulator-always-on;
-		};
-
-		pm8226_l18: l18 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_l19: l19 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8226_l20: l20 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-
-		pm8226_l21: l21 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_l22: l22 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8226_l23: l23 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pm8226_l24: l24 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1350000>;
-		};
-
-		pm8226_l25: l25 {
-			regulator-min-microvolt = <1775000>;
-			regulator-max-microvolt = <2125000>;
-		};
-
-		pm8226_l26: l26 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pm8226_l27: l27 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_l28: l28 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_lvs1: lvs1 {};
-	};
-};
-
-&sdhc_1 {
-	vmmc-supply = <&pm8226_l17>;
-	vqmmc-supply = <&pm8226_l6>;
-
-	bus-width = <8>;
-	non-removable;
-
-	status = "okay";
-};
-
-&sdhc_2 {
-	vmmc-supply = <&pm8226_l18>;
-	vqmmc-supply = <&pm8226_l21>;
-
-	bus-width = <4>;
-	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&tlmm {
-	accel_int_default_state: accel-int-default-state {
-		pins = "gpio54";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	backlight_i2c_default_state: backlight-i2c-default-state {
-		pins = "gpio20", "gpio21";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	backlight_pwm_default_state: backlight-pwm-default-state {
-		pins = "gpio33";
-		function = "gp0_clk";
-	};
-
-	muic_int_default_state: muic-int-default-state {
-		pins = "gpio67";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	tsp_en_default_state: tsp-en-default-state {
-		pins = "gpio31";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	tsp_en1_default_state: tsp-en1-default-state {
-		pins = "gpio73";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	tsp_int_rst_default_state: tsp-int-rst-default-state {
-		pins = "gpio17";
-		function = "gpio";
-		drive-strength = <10>;
-		bias-pull-up;
-	};
-};
-
-&usb {
-	extcon = <&muic>, <&muic>;
-	status = "okay";
-};
-
-&usb_hs_phy {
-	extcon = <&muic>;
-	v1p8-supply = <&pm8226_l10>;
-	v3p3-supply = <&pm8226_l20>;
-};
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
deleted file mode 100644
index 8e4b61e4d4b17..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ /dev/null
@@ -1,977 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-#include "qcom-msm8660.dtsi"
-
-/ {
-	model = "Qualcomm APQ8060 Dragonboard";
-	compatible = "qcom,apq8060-dragonboard", "qcom,msm8660";
-
-	aliases {
-		serial0 = &gsbi12_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		/* Main power of the board: 3.7V */
-		vph: regulator-fixed {
-			compatible = "regulator-fixed";
-			regulator-min-microvolt = <3700000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-name = "VPH";
-			regulator-type = "voltage";
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		/* GPIO controlled ethernet power regulator */
-		dragon_veth: xc622a331mrg {
-			compatible = "regulator-fixed";
-			regulator-name = "XC6222A331MR-G";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vph>;
-			gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			pinctrl-names = "default";
-			pinctrl-0 = <&dragon_veth_gpios>;
-			regulator-always-on;
-		};
-
-		/* VDDvario fixed regulator */
-		dragon_vario: nds332p {
-			compatible = "regulator-fixed";
-			regulator-name = "NDS332P";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			vin-supply = <&pm8058_s3>;
-		};
-
-		/* This is a levelshifter for SDCC5 */
-		dragon_vio_txb: txb0104rgyr {
-			compatible = "regulator-fixed";
-			regulator-name = "Dragon SDCC levelshifter";
-			vin-supply = <&pm8058_l14>;
-			regulator-always-on;
-		};
-	};
-
-	/*
-	 * Capella CM3605 light and proximity sensor mounted directly
-	 * on the sensor board.
-	 */
-	cm3605 {
-		compatible = "capella,cm3605";
-		vdd-supply = <&pm8058_l14>; // 2.85V
-		aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>;
-		capella,aset-resistance-ohms = <100000>;
-		/* Trig on both edges - getting close or far away */
-		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
-		/* MPP05 analog input to the XOADC */
-		io-channels = <&xoadc 0x00 0x05>;
-		io-channel-names = "aout";
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
-	};
-};
-
-&ebi2 {
-	/* The EBI2 will instantiate first, then populate its children */
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_ebi2_pins>;
-	status = "okay";
-
-	/*
-	 * An on-board SMSC LAN9221 chip for "debug ethernet",
-	 * which is actually just an ordinary ethernet on the
-	 * EBI2. This has a 25MHz chrystal next to it, so no
-	 * clocking is needed.
-	 */
-	ethernet@2,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		reg = <2 0x0 0x100>;
-		/*
-		 * The second interrupt is the PME interrupt
-		 * for network wakeup, connected to the TLMM.
-		 */
-		interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
-				    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
-		reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
-		vdd33a-supply = <&dragon_veth>;
-		vddvario-supply = <&dragon_vario>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_ethernet_gpios>;
-		phy-mode = "mii";
-		reg-io-width = <2>;
-		smsc,force-external-phy;
-		smsc,irq-push-pull;
-
-		/*
-		 * SLOW chipselect config
-		 * Delay 9 cycles (140ns@64MHz) between SMSC
-		 * LAN9221 Ethernet controller reads and writes
-		 * on CS2.
-		 */
-		qcom,xmem-recovery-cycles = <0>;
-		qcom,xmem-write-hold-cycles = <3>;
-		qcom,xmem-write-delta-cycles = <31>;
-		qcom,xmem-read-delta-cycles = <28>;
-		qcom,xmem-write-wait-cycles = <9>;
-		qcom,xmem-read-wait-cycles = <9>;
-	};
-};
-
-&gsbi3 {
-	qcom,mode = <GSBI_PROT_I2C>;
-	status = "okay";
-};
-
-&gsbi3_i2c {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_gsbi3_i2c_pins>;
-	status = "okay";
-
-	touchscreen@24 {
-		compatible = "cypress,cy8ctma340";
-		reg = <0x24>;
-		/* Certainly we can do at least 400 kHz */
-		clock-frequency = <400000>;
-		/* IRQ on GPIO61 called /CTP_INT */
-		interrupt-parent = <&tlmm>;
-		interrupts = <61 IRQ_TYPE_EDGE_FALLING>;
-		/*
-		 * The I2C bus is using a PCA9306 level translator from L16A
-		 * to L2B so these two voltages are needed and L16A is
-		 * kind of the IO voltage, however L16Aisn't really fed to
-		 * the TMA340, which relies entirely on L2B (PM8901 L2).
-		 */
-		vcpin-supply = <&pm8058_l16>;
-		vdd-supply = <&pm8901_l2>;
-		/* GPIO58, called WAKE_CTP */
-		reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <800>;
-		active-interval-ms = <0>;
-		touch-timeout-ms = <255>;
-		lowpower-interval-ms = <10>;
-		bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_tma340_gpios>;
-	};
-};
-
-&gsbi8 {
-	qcom,mode = <GSBI_PROT_I2C>;
-	status = "okay";
-};
-
-&gsbi8_i2c {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
-	status = "okay";
-
-	eeprom@52 {
-		/* A 16KiB Platform ID EEPROM on the CPU carrier board */
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-		vcc-supply = <&pm8058_s3>;
-		pagesize = <64>;
-	};
-	wm8903: wm8903@1a {
-		/* This Woolfson Micro device has an unrouted interrupt line */
-		compatible = "wlf,wm8903";
-		reg = <0x1a>;
-
-		AVDD-supply = <&pm8058_l16>;
-		CPVDD-supply = <&pm8058_l16>;
-		DBVDD-supply = <&pm8058_s3>;
-		DCVDD-supply = <&pm8058_l0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		micdet-cfg = <0>;
-		micdet-delay = <100>;
-		gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-	};
-};
-
-&gsbi12 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-};
-
-&gsbi12_serial {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_gsbi12_serial_pins>;
-	status = "okay";
-};
-
-&gsbi12_i2c {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
-	status = "okay";
-
-	ak8975@c {
-		compatible = "asahi-kasei,ak8975";
-		reg = <0x0c>;
-		interrupt-parent = <&pm8058_gpio>;
-		interrupts = <33 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_ak8975_gpios>;
-		vid-supply = <&pm8058_lvs0>; // 1.8V
-		vdd-supply = <&pm8058_l14>; // 2.85V
-	};
-	bmp085@77 {
-		compatible = "bosch,bmp085";
-		reg = <0x77>;
-		interrupt-parent = <&pm8058_gpio>;
-		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
-		reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_bmp085_gpios>;
-		vddd-supply = <&pm8058_lvs0>; // 1.8V
-		vdda-supply = <&pm8058_l14>; // 2.85V
-	};
-	mpu3050@68 {
-		compatible = "invensense,mpu3050";
-		reg = <0x68>;
-		/*
-		 * GPIO17 is pulled high by a 10k
-		 * resistor to VLOGIC so needs to be
-		 * active low/falling edge.
-		 */
-		interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_mpu3050_gpios>;
-		vlogic-supply = <&pm8058_lvs0>; // 1.8V
-		vdd-supply = <&pm8058_l14>; // 2.85V
-
-		/*
-		 * The MPU-3050 acts as a hub for the
-		 * accelerometer.
-		 */
-		i2c-gate {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			kxsd9@18 {
-				compatible = "kionix,kxsd9";
-				reg = <0x18>;
-				interrupt-parent = <&tlmm>;
-				interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_kxsd9_gpios>;
-				iovdd-supply = <&pm8058_lvs0>; // 1.8V
-				vdd-supply = <&pm8058_l14>; // 2.85V
-			};
-		};
-	};
-};
-
-&pm8058_gpio {
-	dragon_ethernet_gpios: ethernet-state {
-		pinconf {
-			pins = "gpio7";
-			function = "normal";
-			input-enable;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_bmp085_gpios: bmp085-state {
-		pinconf {
-			pins = "gpio16";
-			function = "normal";
-			input-enable;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_mpu3050_gpios: mpu3050-state {
-		pinconf {
-			pins = "gpio17";
-			function = "normal";
-			input-enable;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_sdcc3_gpios: sdcc3-state {
-		pinconf {
-			pins = "gpio22";
-			function = "normal";
-			input-enable;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_sdcc5_gpios: sdcc5-state {
-		pinconf {
-			pins = "gpio26";
-			function = "normal";
-			input-enable;
-			bias-pull-up;
-			qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_ak8975_gpios: ak8975-state {
-		pinconf {
-			pins = "gpio33";
-			function = "normal";
-			input-enable;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_cm3605_gpios: cm3605-state {
-		/* Pin 34 connected to the proxy IRQ */
-		gpio34-pins {
-			pins = "gpio34";
-			function = "normal";
-			input-enable;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-		/* Pin 35 connected to ASET */
-		gpio35-pins {
-			pins = "gpio35";
-			function = "normal";
-			output-high;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_veth_gpios: veth-state {
-		pinconf {
-			pins = "gpio40";
-			function = "normal";
-			bias-disable;
-			drive-push-pull;
-		};
-	};
-};
-
-&pm8058_keypad {
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_MENU)
-		MATRIX_KEY(0, 2, KEY_1)
-		MATRIX_KEY(0, 3, KEY_4)
-		MATRIX_KEY(0, 4, KEY_7)
-		MATRIX_KEY(1, 0, KEY_UP)
-		MATRIX_KEY(1, 1, KEY_LEFT)
-		MATRIX_KEY(1, 2, KEY_DOWN)
-		MATRIX_KEY(1, 3, KEY_5)
-		MATRIX_KEY(1, 3, KEY_8)
-		MATRIX_KEY(2, 0, KEY_HOME)
-		MATRIX_KEY(2, 1, KEY_REPLY)
-		MATRIX_KEY(2, 2, KEY_2)
-		MATRIX_KEY(2, 3, KEY_6)
-		MATRIX_KEY(3, 0, KEY_VOLUMEUP)
-		MATRIX_KEY(3, 1, KEY_RIGHT)
-		MATRIX_KEY(3, 2, KEY_3)
-		MATRIX_KEY(3, 3, KEY_9)
-		MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
-		MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
-		MATRIX_KEY(4, 1, KEY_BACK)
-		MATRIX_KEY(4, 2, KEY_CAMERA)
-		MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
-	>;
-	keypad,num-rows = <6>;
-	keypad,num-columns = <5>;
-};
-
-&pm8058_led48 {
-	/*
-	 * The keypad LED @0x48 is routed to
-	 * the sensor board where it is
-	 * connected to an infrared LED
-	 * SFH4650 (60mW, @850nm) next to the
-	 * ambient light and proximity sensor
-	 * Capella Microsystems CM3605.
-	 */
-	label = "pm8058:infrared:proximitysensor";
-	default-state = "off";
-	linux,default-trigger = "cm3605";
-	status = "okay";
-};
-
-&pm8058_led131 {
-	label = "pm8058:red";
-	color = <LED_COLOR_ID_RED>;
-	default-state = "off";
-	status = "okay";
-};
-
-&pm8058_led132 {
-	/*
-	 * This is actually green too on my
-	 * board, but documented as yellow.
-	 */
-	label = "pm8058:yellow";
-	color = <LED_COLOR_ID_YELLOW>;
-	default-state = "off";
-	linux,default-trigger = "mmc0";
-	status = "okay";
-};
-
-&pm8058_led133 {
-	label = "pm8058:green";
-	function = LED_FUNCTION_HEARTBEAT;
-	color = <LED_COLOR_ID_GREEN>;
-	default-state = "on";
-	linux,default-trigger = "heartbeat";
-	status = "okay";
-};
-
-&pm8058_mpps {
-	dragon_cm3605_mpps: cm3605-mpps-state {
-		pins = "mpp5";
-		function = "analog";
-		input-enable;
-		bias-high-impedance;
-		/* Let's use channel 5 */
-		qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
-		power-source = <PM8058_GPIO_S3>;
-	};
-};
-
-&rpm {
-	/*
-	 * Set up of the PMIC RPM regulators for this board
-	 * PM8901 supplies "preliminary regulators" whatever
-	 * that means
-	 */
-	pm8901-regulators {
-		vdd_l0-supply = <&pm8901_s4>;
-		vdd_l1-supply = <&vph>;
-		vdd_l2-supply = <&vph>;
-		vdd_l3-supply = <&vph>;
-		vdd_l4-supply = <&vph>;
-		vdd_l5-supply = <&vph>;
-		vdd_l6-supply = <&vph>;
-		/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
-		vdd_s2-supply = <&vph>;
-		vdd_s3-supply = <&vph>;
-		vdd_s4-supply = <&vph>;
-		lvs0_in-supply = <&pm8058_s3>;
-		lvs1_in-supply = <&pm8901_s4>;
-		lvs2_in-supply = <&pm8058_l0>;
-		lvs3_in-supply = <&pm8058_s2>;
-		mvs_in-supply = <&pm8058_s3>;
-
-		l0 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-		l1 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			bias-pull-down;
-		};
-		l2 {
-			/* TMA340 requires strictly 3.3V */
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			bias-pull-down;
-		};
-		l3 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			bias-pull-down;
-		};
-		l4 {
-			regulator-min-microvolt = <2600000>;
-			regulator-max-microvolt = <2600000>;
-			bias-pull-down;
-		};
-		l5 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-			bias-pull-down;
-		};
-		l6 {
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <2200000>;
-			bias-pull-down;
-		};
-
-		/* s0 and s1 are SAW regulators controlled over SPM */
-		s2 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-		s3 {
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-		s4 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-
-		/* LVS0 thru 3 and mvs are just switches */
-		lvs0 {
-			regulator-always-on;
-		};
-		lvs1 { };
-		lvs2 { };
-		lvs3 { };
-		mvs { };
-
-	};
-
-	pm8058-regulators {
-		vdd_l0_l1_lvs-supply = <&pm8058_s3>;
-		vdd_l2_l11_l12-supply = <&vph>;
-		vdd_l3_l4_l5-supply = <&vph>;
-		vdd_l6_l7-supply = <&vph>;
-		vdd_l8-supply = <&vph>;
-		vdd_l9-supply = <&vph>;
-		vdd_l10-supply = <&vph>;
-		vdd_l13_l16-supply = <&pm8058_s4>;
-		vdd_l14_l15-supply = <&vph>;
-		vdd_l17_l18-supply = <&vph>;
-		vdd_l19_l20-supply = <&vph>;
-		vdd_l21-supply = <&pm8058_s3>;
-		vdd_l22-supply = <&pm8058_s3>;
-		vdd_l23_l24_l25-supply = <&pm8058_s3>;
-		vdd_s0-supply = <&vph>;
-		vdd_s1-supply = <&vph>;
-		vdd_s2-supply = <&vph>;
-		vdd_s3-supply = <&vph>;
-		vdd_s4-supply = <&vph>;
-		vdd_ncp-supply = <&vph>;
-
-		l0 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-		l1 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-		l2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2600000>;
-			bias-pull-down;
-		};
-		l3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-		l4 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-			bias-pull-down;
-		};
-		l5 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-			bias-pull-down;
-		};
-		l6 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3600000>;
-			bias-pull-down;
-		};
-		l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-		l8 {
-			regulator-min-microvolt = <2900000>;
-			regulator-max-microvolt = <3050000>;
-			bias-pull-down;
-		};
-		l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-		l10 {
-			regulator-min-microvolt = <2600000>;
-			regulator-max-microvolt = <2600000>;
-			bias-pull-down;
-		};
-		l11 {
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			bias-pull-down;
-		};
-		l12 {
-			regulator-min-microvolt = <2900000>;
-			regulator-max-microvolt = <2900000>;
-			bias-pull-down;
-		};
-		l13 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-			bias-pull-down;
-		};
-		l14 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-		l15 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-			bias-pull-down;
-		};
-		l16 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-			regulator-always-on;
-		};
-		l17 {
-			// 1.5V according to schematic
-			regulator-min-microvolt = <2600000>;
-			regulator-max-microvolt = <2600000>;
-			bias-pull-down;
-		};
-		l18 {
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <2200000>;
-			bias-pull-down;
-		};
-		l19 {
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			bias-pull-down;
-		};
-		l20 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-		l21 {
-			// 1.1 V according to schematic
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-			regulator-always-on;
-		};
-		l22 {
-			// 1.2 V according to schematic
-			regulator-min-microvolt = <1150000>;
-			regulator-max-microvolt = <1150000>;
-			bias-pull-down;
-		};
-		l23 {
-			// Unused
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-		l24 {
-			// Unused
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-		l25 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-
-		s0 {
-			// regulator-min-microvolt = <500000>;
-			// regulator-max-microvolt = <1325000>;
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-		s1 {
-			// regulator-min-microvolt = <500000>;
-			// regulator-max-microvolt = <1250000>;
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-		s2 {
-			// 1.3 V according to schematic
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1400000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-		s3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,switch-mode-frequency = <1600000>;
-			regulator-always-on;
-			bias-pull-down;
-		};
-		s4 {
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <2200000>;
-			qcom,switch-mode-frequency = <1600000>;
-			regulator-always-on;
-			bias-pull-down;
-		};
-
-		/* LVS0 and LVS1 are just switches */
-		lvs0 {
-			bias-pull-down;
-		};
-		lvs1 {
-			bias-pull-down;
-		};
-
-		ncp {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,switch-mode-frequency = <1600000>;
-		};
-	};
-};
-
-/* Internal 3.69 GiB eMMC */
-&sdcc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_sdcc1_pins>;
-	vmmc-supply = <&pm8901_l5>;
-	vqmmc-supply = <&pm8901_lvs0>;
-	status = "okay";
-};
-
-/* External micro SD card, directly connected, pulled up to 2.85 V */
-&sdcc3 {
-	/* Enable SSBI GPIO 22 as input, use for card detect */
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
-	cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&pm8058_l14>;
-	status = "okay";
-};
-
-/*
- * Second external micro SD card, using two TXB104RGYR levelshifters
- * to lift from 1.8 V to 2.85 V
- */
-&sdcc5 {
-	/* Enable SSBI GPIO 26 as input, use for card detect */
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
-	cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&pm8058_l14>;
-	vqmmc-supply = <&dragon_vio_txb>;
-	status = "okay";
-};
-
-&tlmm {
-	/* eMMC pins, all 8 data lines connected */
-	dragon_sdcc1_pins: sdcc1-state {
-		clk-pins {
-			pins = "gpio167"; /* SDC1 CLK */
-			function = "sdc1";
-			drive-strength = <16>;
-			bias-disable;
-		};
-		cmd-pins {
-			pins = "gpio168"; /* SDC1 CMD */
-			function = "sdc1";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-		data-pins {
-			/* SDC1 D0 to D7 */
-			pins = "gpio159", "gpio160", "gpio161", "gpio162",
-			     "gpio163", "gpio164", "gpio165", "gpio166";
-			function = "sdc1";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	/*
-	 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
-	 * configuration.
-	 */
-	dragon_sdcc3_pins: sdcc3-state {
-		clk-pins {
-			pins = "sdc3_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		cmd-pins {
-			pins = "sdc3_cmd";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		data-pins {
-			pins = "sdc3_data";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	/* Second SD card slot pins */
-	dragon_sdcc5_pins: sdcc5-state {
-		clk-pins {
-			pins = "gpio97"; /* SDC5 CLK */
-			function = "sdc5";
-			drive-strength = <16>;
-			bias-disable;
-		};
-		cmd-pins {
-			pins = "gpio95"; /* SDC5 CMD */
-			function = "sdc5";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-		data-pins {
-			/* SDC5 D0 to D3 */
-			pins = "gpio96", "gpio98", "gpio99", "gpio100";
-			function = "sdc5";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	dragon_gsbi3_i2c_pins: gsbi3-i2c-state {
-		pins = "gpio43", "gpio44";
-		function = "gsbi3";
-		drive-strength = <8>;
-		/* These have external pull-up 2.2kOhm to 1.8V */
-		bias-disable;
-	};
-
-	dragon_gsbi8_i2c_pins: gsbi8-i2c-state {
-		pins = "gpio64", "gpio65";
-		function = "gsbi8";
-		drive-strength = <16>;
-		/* These have external pull-up 2.2kOhm to 1.8V */
-		bias-disable;
-	};
-
-	dragon_gsbi12_i2c_pins: gsbi12-i2c-state {
-		pins = "gpio115", "gpio116";
-		function = "gsbi12";
-		drive-strength = <16>;
-		/* These have external pull-up 4.7kOhm to 1.8V */
-		bias-disable;
-	};
-
-	/* Primary serial port uart 0 pins */
-	dragon_gsbi12_serial_pins: gsbi12-serial-state {
-		tx-pins {
-			pins = "gpio117";
-			function = "gsbi12";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		rx-pins {
-			pins = "gpio118";
-			function = "gsbi12";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	dragon_ebi2_pins: ebi2-state {
-		/*
-		 * Pins used by EBI2 on the Dragonboard, actually only
-		 * CS2 is used by a real peripheral. CS0 is just
-		 * routed to a test point.
-		 */
-		mux0-pins {
-			pins =
-			    /* "gpio39", CS1A_N this is not good to mux */
-			    "gpio40", /* CS2A_N */
-			    "gpio134"; /* CS0_N testpoint TP29 */
-			function = "ebi2cs";
-		};
-		mux1-pins {
-			pins =
-			    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
-			    "gpio123", "gpio124", "gpio125", "gpio126",
-			    "gpio127", "gpio128", "gpio129", "gpio130",
-			    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
-			    "gpio135", "gpio136", "gpio137", "gpio138",
-			    "gpio139", "gpio140", "gpio141", "gpio142",
-			    "gpio143", "gpio144", "gpio145", "gpio146",
-			    "gpio147", "gpio148", "gpio149", "gpio150",
-			    "gpio151", /* EBI2_OE_N */
-			    "gpio153", /* EBI2_ADV */
-			    "gpio157"; /* EBI2_WE_N */
-			function = "ebi2";
-		};
-	};
-
-	/* Interrupt line for the KXSD9 accelerometer */
-	dragon_kxsd9_gpios: kxsd9-state {
-		pins = "gpio57"; /* IRQ line */
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	dragon_tma340_gpios: tma340-state {
-		reset-pins {
-			/* RESET line, TS_ATTN, WAKE_CTP */
-			pins = "gpio58";
-			function = "gpio";
-			drive-strength = <6>;
-			bias-disable;
-		};
-		irq-pins {
-			pins = "gpio61"; /* IRQ line */
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&xoadc {
-	/* Reference voltage 2.2 V */
-	xoadc-ref-supply = <&pm8058_l18>;
-
-	/* Board-specific channels */
-	mpp5@5 {
-		/* Connected to AOUT of ALS sensor */
-		reg = <0x00 0x05>;
-	};
-	mpp6@6 {
-		/* Connected to test point TP43 */
-		reg = <0x00 0x06>;
-	};
-	mpp7@7 {
-		/* Connected to battery thermistor */
-		reg = <0x00 0x07>;
-	};
-	mpp8@8 {
-		/* Connected to battery ID detector */
-		reg = <0x00 0x08>;
-	};
-	mpp9@9 {
-		/* Connected to XO thermistor */
-		reg = <0x00 0x09>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
deleted file mode 100644
index c57c27cd8a202..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ /dev/null
@@ -1,348 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-/ {
-	model = "Asus Nexus7(flo)";
-	compatible = "asus,nexus7-flo", "qcom,apq8064";
-	chassis-type = "tablet";
-
-	aliases {
-		serial0 = &gsbi7_serial;
-		serial1 = &gsbi6_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		ramoops@88d00000 {
-			compatible = "ramoops";
-			reg = <0x88d00000 0x100000>;
-			record-size = <0x00020000>;
-			console-size = <0x00020000>;
-			ftrace-size = <0x00020000>;
-		};
-	};
-
-	ext_3p3v: regulator-ext-3p3v {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "ext_3p3v";
-		regulator-type = "voltage";
-		startup-delay-us = <0>;
-		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	soc {
-		sram@2a03f000 {
-			compatible = "qcom,apq8064-imem", "syscon", "simple-mfd";
-			reg = <0x2a03f000 0x1000>;
-
-			reboot-mode {
-				compatible = "syscon-reboot-mode";
-				offset = <0x65c>;
-
-				mode-normal = <0x77665501>;
-				mode-bootloader = <0x77665500>;
-				mode-recovery = <0x77665502>;
-			};
-		};
-	};
-};
-
-&dsi0 {
-	vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
-	vdd-supply = <&pm8921_l8>;
-	vddio-supply = <&pm8921_lvs7>;
-	avdd-supply = <&pm8921_l11>;
-	status = "okay";
-
-	panel@0 {
-		reg = <0>;
-		compatible = "jdi,lt070me05000";
-
-		vddp-supply = <&pm8921_l17>;
-		iovcc-supply = <&pm8921_lvs7>;
-
-		enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
-		dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
-			};
-		};
-	};
-};
-
-&dsi0_in {
-	remote-endpoint = <&mdp_dsi1_out>;
-};
-
-&dsi0_out {
-	remote-endpoint = <&panel_in>;
-	data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
-	vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
-	status = "okay";
-};
-
-&gsbi1 {
-	qcom,mode = <GSBI_PROT_I2C>;
-	status = "okay";
-};
-
-&gsbi1_i2c {
-	status = "okay";
-	clock-frequency = <200000>;
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-		pagesize = <32>;
-	};
-
-	bq27541@55 {
-		compatible = "ti,bq27541";
-		reg = <0x55>;
-	};
-
-};
-
-&gsbi3 {
-	qcom,mode = <GSBI_PROT_I2C>;
-	status = "okay";
-};
-
-&gsbi3_i2c {
-	clock-frequency = <200000>;
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	trackpad@10 {
-		compatible = "elan,ekth3500";
-		reg = <0x10>;
-		interrupt-parent = <&tlmm_pinmux>;
-		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&gsbi6 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-};
-
-&gsbi6_serial {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gsbi6_uart_4pins>;
-	status = "okay";
-};
-
-&gsbi7 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-};
-
-&gsbi7_serial {
-	status = "okay";
-};
-
-&mdp {
-	status = "okay";
-};
-
-/* eMMC */
-&sdcc1 {
-	vmmc-supply = <&pm8921_l5>;
-	vqmmc-supply = <&pm8921_s4>;
-	status = "okay";
-};
-
-&mdp_dsi1_out {
-	remote-endpoint = <&dsi0_in>;
-};
-
-&rpm {
-	regulators {
-		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-		vin_lvs1_3_6-supply = <&pm8921_s4>;
-		vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-
-		vdd_l24-supply = <&pm8921_s1>;
-		vdd_l25-supply = <&pm8921_s1>;
-		vin_lvs2-supply = <&pm8921_s1>;
-
-		vdd_l26-supply = <&pm8921_s7>;
-		vdd_l27-supply = <&pm8921_s7>;
-		vdd_l28-supply = <&pm8921_s7>;
-
-		vdd_ncp-supply = <&pm8921_l6>;
-
-		/* Buck SMPS */
-		s1 {
-			regulator-always-on;
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			qcom,switch-mode-frequency = <3200000>;
-			bias-pull-down;
-		};
-
-		/* msm otg HSUSB_VDDCX */
-		s3 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1150000>;
-			qcom,switch-mode-frequency = <4800000>;
-		};
-
-		/*
-		 * msm_sdcc.1-sdc-vdd_io
-		 * tabla2x-slim-CDC_VDDA_RX
-		 * tabla2x-slim-CDC_VDDA_TX
-		 * tabla2x-slim-CDC_VDD_CP
-		 * tabla2x-slim-VDDIO_CDC
-		 */
-		s4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,switch-mode-frequency = <3200000>;
-			regulator-always-on;
-		};
-
-		s7 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			qcom,switch-mode-frequency = <3200000>;
-		};
-
-		/* mipi_dsi.1-dsi1_pll_vdda */
-		l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-always-on;
-		};
-
-		/* msm_otg-HSUSB_3p3 */
-		l3 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-			bias-pull-down;
-		};
-
-		/* msm_otg-HSUSB_1p8 */
-		l4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-
-		/* msm_sdcc.1-sdc_vdd */
-		l5 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-always-on;
-			bias-pull-down;
-		};
-
-		l6 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		/* mipi_dsi.1-dsi1_avdd */
-		l11 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			bias-pull-down;
-			regulator-always-on;
-		};
-
-		/* pwm_power for backlight */
-		l17 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-		};
-
-		/* camera, qdsp6 */
-		l23 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-
-		/*
-		 * tabla2x-slim-CDC_VDDA_A_1P2V
-		 * tabla2x-slim-VDDD_CDC_D
-		 */
-		l25 {
-			regulator-min-microvolt = <1250000>;
-			regulator-max-microvolt = <1250000>;
-			bias-pull-down;
-		};
-
-		lvs1 {
-			bias-pull-down;
-		};
-
-		lvs4 {
-			bias-pull-down;
-		};
-
-		lvs5 {
-			bias-pull-down;
-		};
-
-		lvs6 {
-			bias-pull-down;
-		};
-		/*
-		 * mipi_dsi.1-dsi1_vddio
-		 * pil_riva-pll_vdd
-		 */
-		lvs7 {
-			bias-pull-down;
-		};
-	};
-};
-
-&usb_hs1_phy {
-	v3p3-supply = <&pm8921_l3>;
-	v1p8-supply = <&pm8921_l4>;
-};
-
-/* OTG */
-&usb1 {
-	dr_mode = "otg";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
deleted file mode 100644
index d6ecfd8addb7a..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ /dev/null
@@ -1,230 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "CompuLab CM-QS600";
-	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
-
-	aliases {
-		serial0 = &gsbi7_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	sdcc4_pwrseq: pwrseq-sdcc4 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_default_gpios>;
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
-	};
-
-	/* on board fixed 3.3v supply */
-	v3p3_fixed: regulator-v3p3 {
-		compatible = "regulator-fixed";
-		regulator-name = "PCIE V3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&gsbi1 {
-	qcom,mode = <GSBI_PROT_I2C>;
-	status = "okay";
-};
-
-&gsbi1_i2c {
-	clock-frequency = <200000>;
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-};
-
-&gsbi7 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-};
-
-&gsbi7_serial {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gsbi7_uart_2pins>;
-	status = "okay";
-};
-
-&pcie {
-	vdda-supply = <&pm8921_s3>;
-	vdda_phy-supply = <&pm8921_lvs6>;
-	vdda_refclk-supply = <&v3p3_fixed>;
-	pinctrl-0 = <&pcie_pins>;
-	pinctrl-names = "default";
-	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pm8921_gpio {
-	wlan_default_gpios: wlan-gpios-state {
-		pinconf {
-			pins = "gpio43";
-			function = "normal";
-			bias-disable;
-			power-source = <PM8921_GPIO_S4>;
-		};
-	};
-};
-
-&rpm {
-	regulators {
-		vin_lvs1_3_6-supply = <&pm8921_s4>;
-		vin_lvs2-supply = <&pm8921_s1>;
-		vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-		vdd_l24-supply = <&pm8921_s1>;
-		vdd_l25-supply = <&pm8921_s1>;
-		vdd_l26-supply = <&pm8921_s7>;
-		vdd_l27-supply = <&pm8921_s7>;
-		vdd_l28-supply = <&pm8921_s7>;
-
-
-		/* Buck SMPS */
-		s1 {
-			regulator-always-on;
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			qcom,switch-mode-frequency = <3200000>;
-			bias-pull-down;
-		};
-
-		s3 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1400000>;
-			qcom,switch-mode-frequency = <4800000>;
-		};
-
-		s4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,switch-mode-frequency = <3200000>;
-		};
-
-		s7 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			qcom,switch-mode-frequency = <3200000>;
-		};
-
-		l3 {
-			regulator-min-microvolt = <3050000>;
-			regulator-max-microvolt = <3300000>;
-			bias-pull-down;
-		};
-
-		l4 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-
-		l5 {
-			regulator-min-microvolt = <2750000>;
-			regulator-max-microvolt = <3000000>;
-			bias-pull-down;
-		};
-
-		l23 {
-			regulator-min-microvolt = <1700000>;
-			regulator-max-microvolt = <1900000>;
-			bias-pull-down;
-		};
-
-		lvs6 {
-			bias-pull-down;
-		};
-
-	};
-};
-
-/* eMMC */
-&sdcc1 {
-	vmmc-supply = <&pm8921_l5>;
-	vqmmc-supply = <&pm8921_s4>;
-	status = "okay";
-};
-
-/* External micro SD card */
-&sdcc3 {
-	vmmc-supply = <&v3p3_fixed>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&card_detect>;
-	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-/* WLAN */
-&sdcc4 {
-	status = "okay";
-	vmmc-supply = <&v3p3_fixed>;
-	vqmmc-supply = <&v3p3_fixed>;
-	mmc-pwrseq = <&sdcc4_pwrseq>;
-};
-
-&tlmm_pinmux {
-	card_detect: card_detect {
-		mux {
-			pins = "gpio26";
-			function = "gpio";
-			bias-disable;
-		};
-	};
-
-	pcie_pins: pcie_pinmux {
-		mux {
-			pins = "gpio27";
-			function = "gpio";
-		};
-		conf {
-			pins = "gpio27";
-			drive-strength = <12>;
-			bias-disable;
-		};
-	};
-};
-
-&usb_hs1_phy {
-	v3p3-supply = <&pm8921_l3>;
-	v1p8-supply = <&pm8921_l4>;
-};
-
-&usb_hs3_phy {
-	v3p3-supply = <&pm8921_l3>;
-	v1p8-supply = <&pm8921_l23>;
-};
-
-&usb_hs4_phy {
-	v3p3-supply = <&pm8921_l3>;
-	v1p8-supply = <&pm8921_l23>;
-};
-
-/* OTG */
-&usb1 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usb3 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usb4 {
-	dr_mode = "host";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
deleted file mode 100644
index 96307550523aa..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Qualcomm APQ8064/IFC6410";
-	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
-
-	aliases {
-		serial0 = &gsbi7_serial;
-		serial1 = &gsbi6_serial;
-		i2c0 = &gsbi1_i2c;
-		i2c1 = &gsbi2_i2c;
-		i2c2 = &gsbi3_i2c;
-		i2c3 = &gsbi4_i2c;
-		spi0 = &gsbi5_spi;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&notify_led>;
-
-		led-user1 {
-			label = "apq8064:green:user1";
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "d";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-	};
-
-	sdcc4_pwrseq: pwrseq-sdcc4 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_default_gpios>;
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
-	};
-
-	ext_3p3v: regulator-ext-3p3v {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "ext_3p3v";
-		regulator-type = "voltage";
-		startup-delay-us = <0>;
-		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&gsbi1 {
-	qcom,mode = <GSBI_PROT_I2C>;
-	status = "okay";
-};
-
-&gsbi1_i2c {
-	clock-frequency = <200000>;
-	status = "okay";
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-		pagesize = <32>;
-	};
-};
-
-&gsbi3 {
-	qcom,mode = <GSBI_PROT_I2C>;
-	status = "okay";
-};
-
-&gsbi3_i2c {
-	status = "okay";
-};
-
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C>;
-	status = "okay";
-};
-
-/* CAM I2C MIPI-CSI connector */
-&gsbi4_i2c {
-	status = "okay";
-};
-
-&gsbi5 {
-	qcom,mode = <GSBI_PROT_SPI>;
-	status = "okay";
-};
-
-&gsbi5_spi {
-	num-cs = <1>;
-	cs-gpios = <&tlmm_pinmux 53 0>;
-	status = "okay";
-};
-
-&gsbi6 {
-	qcom,mode = <GSBI_PROT_UART_W_FC>;
-	status = "okay";
-};
-
-&gsbi6_serial {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gsbi6_uart_4pins>;
-	status = "okay";
-};
-
-&gsbi7 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-};
-
-&gsbi7_serial {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gsbi7_uart_2pins>;
-	status = "okay";
-};
-
-&hdmi {
-	core-vdda-supply = <&pm8921_hdmi_switch>;
-	hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&hdmi_in {
-	remote-endpoint = <&mdp_dtv_out>;
-};
-
-&hdmi_out {
-	remote-endpoint = <&hdmi_con>;
-};
-
-&hdmi_phy {
-	status = "okay";
-	core-vdda-supply = <&pm8921_hdmi_switch>;
-};
-
-&mdp {
-	status = "okay";
-};
-
-&mdp_dtv_out {
-	remote-endpoint = <&hdmi_in>;
-};
-
-&pcie {
-	status = "okay";
-	vdda-supply = <&pm8921_s3>;
-	vdda_phy-supply = <&pm8921_lvs6>;
-	vdda_refclk-supply = <&ext_3p3v>;
-	pinctrl-0 = <&pcie_pins>;
-	pinctrl-names = "default";
-	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
-};
-
-&pm8921_gpio {
-	wlan_default_gpios: wlan-gpios-state {
-		pinconf {
-			pins = "gpio43";
-			function = "normal";
-			bias-disable;
-			power-source = <PM8921_GPIO_S4>;
-		};
-	};
-
-	notify_led: nled-state {
-		pinconf {
-			pins = "gpio18";
-			function = "normal";
-			bias-disable;
-			power-source = <PM8921_GPIO_S4>;
-		};
-	};
-};
-
-&rpm {
-	regulators {
-		vin_lvs1_3_6-supply = <&pm8921_s4>;
-		vin_lvs2-supply = <&pm8921_s1>;
-		vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-		vdd_l24-supply = <&pm8921_s1>;
-		vdd_l25-supply = <&pm8921_s1>;
-		vdd_l26-supply = <&pm8921_s7>;
-		vdd_l27-supply = <&pm8921_s7>;
-		vdd_l28-supply = <&pm8921_s7>;
-
-
-		/* Buck SMPS */
-		s1 {
-			regulator-always-on;
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			qcom,switch-mode-frequency = <3200000>;
-			bias-pull-down;
-		};
-
-		s3 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1400000>;
-			qcom,switch-mode-frequency = <4800000>;
-		};
-
-		s4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,switch-mode-frequency = <3200000>;
-		};
-
-		s7 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			qcom,switch-mode-frequency = <3200000>;
-		};
-
-		l3 {
-			regulator-min-microvolt = <3050000>;
-			regulator-max-microvolt = <3300000>;
-			bias-pull-down;
-		};
-
-		l4 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-
-		l5 {
-			regulator-min-microvolt = <2750000>;
-			regulator-max-microvolt = <3000000>;
-			bias-pull-down;
-		};
-
-		l6 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			bias-pull-down;
-		};
-
-		l23 {
-			regulator-min-microvolt = <1700000>;
-			regulator-max-microvolt = <1900000>;
-			bias-pull-down;
-		};
-
-		lvs1 {
-			bias-pull-down;
-		};
-
-		lvs6 {
-			bias-pull-down;
-		};
-	};
-};
-
-&sata_phy0 {
-	status = "okay";
-};
-
-&sata0 {
-	target-supply = <&pm8921_s4>;
-	status = "okay";
-};
-
-/* eMMC */
-&sdcc1 {
-	vmmc-supply = <&pm8921_l5>;
-	vqmmc-supply = <&pm8921_s4>;
-	status = "okay";
-};
-
-/* External micro SD card */
-&sdcc3 {
-	vmmc-supply = <&pm8921_l6>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&card_detect>;
-	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-/* WLAN */
-&sdcc4 {
-	vmmc-supply = <&ext_3p3v>;
-	vqmmc-supply = <&pm8921_lvs1>;
-	mmc-pwrseq = <&sdcc4_pwrseq>;
-	status = "okay";
-};
-
-&tlmm_pinmux {
-	card_detect: card_detect {
-		mux {
-			pins = "gpio26";
-			function = "gpio";
-			bias-disable;
-		};
-	};
-
-	pcie_pins: pcie_pinmux {
-		mux {
-			pins = "gpio27";
-			function = "gpio";
-		};
-		conf {
-			pins = "gpio27";
-			drive-strength = <12>;
-			bias-disable;
-		};
-	};
-};
-
-&usb_hs1_phy {
-	v3p3-supply = <&pm8921_l3>;
-	v1p8-supply = <&pm8921_l4>;
-};
-
-&usb_hs3_phy {
-	v3p3-supply = <&pm8921_l3>;
-	v1p8-supply = <&pm8921_l23>;
-};
-
-&usb_hs4_phy {
-	v3p3-supply = <&pm8921_l3>;
-	v1p8-supply = <&pm8921_l23>;
-};
-
-/* OTG */
-&usb1 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usb3 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usb4 {
-	dr_mode = "host";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
deleted file mode 100644
index b4d286a6fab1c..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ /dev/null
@@ -1,325 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-&tlmm_pinmux {
-	sdc4_gpios: sdc4-gpios {
-		pios {
-			pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
-			function = "sdc4";
-		};
-	};
-
-	sdcc1_pins: sdcc1-pin-active {
-		clk {
-			pins = "sdc1_clk";
-			drive-strengh = <16>;
-			bias-disable;
-		};
-
-		cmd {
-			pins = "sdc1_cmd";
-			drive-strengh = <10>;
-			bias-pull-up;
-		};
-
-		data {
-			pins = "sdc1_data";
-			drive-strengh = <10>;
-			bias-pull-up;
-		};
-	};
-
-	sdcc3_pins: sdcc3-pin-active {
-		clk {
-			pins = "sdc3_clk";
-			drive-strengh = <8>;
-			bias-disable;
-		};
-
-		cmd {
-			pins = "sdc3_cmd";
-			drive-strengh = <8>;
-			bias-pull-up;
-		};
-
-		data {
-			pins = "sdc3_data";
-			drive-strengh = <8>;
-			bias-pull-up;
-		};
-	};
-
-	ps_hold: ps_hold {
-		mux {
-			pins = "gpio78";
-			function = "ps_hold";
-		};
-	};
-
-	i2c1_pins: i2c1 {
-		mux {
-			pins = "gpio20", "gpio21";
-			function = "gsbi1";
-		};
-
-		pinconf {
-			pins = "gpio20", "gpio21";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c1_pins_sleep: i2c1_pins_sleep {
-		mux {
-			pins = "gpio20", "gpio21";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio20", "gpio21";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	gsbi1_uart_2pins: gsbi1_uart_2pins {
-		mux {
-			pins = "gpio18", "gpio19";
-			function = "gsbi1";
-		};
-	};
-
-	gsbi1_uart_4pins: gsbi1_uart_4pins {
-		mux {
-			pins = "gpio18", "gpio19", "gpio20", "gpio21";
-			function = "gsbi1";
-		};
-	};
-
-	i2c2_pins: i2c2 {
-		mux {
-			pins = "gpio24", "gpio25";
-			function = "gsbi2";
-		};
-
-		pinconf {
-			pins = "gpio24", "gpio25";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c2_pins_sleep: i2c2_pins_sleep {
-		mux {
-			pins = "gpio24", "gpio25";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio24", "gpio25";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	i2c3_pins: i2c3 {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "gsbi3";
-		};
-
-		pinconf {
-			pins = "gpio8", "gpio9";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c3_pins_sleep: i2c3_pins_sleep {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio8", "gpio9";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	i2c4_pins: i2c4 {
-		mux {
-			pins = "gpio12", "gpio13";
-			function = "gsbi4";
-		};
-
-		pinconf {
-			pins = "gpio12", "gpio13";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c4_pins_sleep: i2c4_pins_sleep {
-		mux {
-			pins = "gpio12", "gpio13";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio12", "gpio13";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	spi5_default: spi5_default {
-		pinmux {
-			pins = "gpio51", "gpio52", "gpio54";
-			function = "gsbi5";
-		};
-
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio53";
-		};
-
-		pinconf {
-			pins = "gpio51", "gpio52", "gpio54";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		pinconf_cs {
-			pins = "gpio53";
-			drive-strength = <16>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	spi5_sleep: spi5_sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio51", "gpio52", "gpio53", "gpio54";
-		};
-
-		pinconf {
-			pins = "gpio51", "gpio52", "gpio53", "gpio54";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	i2c6_pins: i2c6 {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "gsbi6";
-		};
-
-		pinconf {
-			pins = "gpio16", "gpio17";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c6_pins_sleep: i2c6_pins_sleep {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio16", "gpio17";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	gsbi6_uart_2pins: gsbi6_uart_2pins {
-		mux {
-			pins = "gpio14", "gpio15";
-			function = "gsbi6";
-		};
-	};
-
-	gsbi6_uart_4pins: gsbi6_uart_4pins {
-		mux {
-			pins = "gpio14", "gpio15", "gpio16", "gpio17";
-			function = "gsbi6";
-		};
-	};
-
-	gsbi7_uart_2pins: gsbi7_uart_2pins {
-		mux {
-			pins = "gpio82", "gpio83";
-			function = "gsbi7";
-		};
-	};
-
-	gsbi7_uart_4pins: gsbi7_uart_4pins {
-		mux {
-			pins = "gpio82", "gpio83", "gpio84", "gpio85";
-			function = "gsbi7";
-		};
-	};
-
-	i2c7_pins: i2c7 {
-		mux {
-			pins = "gpio84", "gpio85";
-			function = "gsbi7";
-		};
-
-		pinconf {
-			pins = "gpio84", "gpio85";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c7_pins_sleep: i2c7_pins_sleep {
-		mux {
-			pins = "gpio84", "gpio85";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio84", "gpio85";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	riva_fm_pin_a: riva-fm-active {
-		pins = "gpio14", "gpio15";
-		function = "riva_fm";
-	};
-
-	riva_bt_pin_a: riva-bt-active {
-		pins = "gpio16", "gpio17";
-		function = "riva_bt";
-	};
-
-	riva_wlan_pin_a: riva-wlan-active {
-		pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
-		function = "riva_wlan";
-
-		drive-strength = <6>;
-		bias-pull-down;
-	};
-
-	hdmi_pinctrl: hdmi-pinctrl {
-		mux {
-			pins = "gpio70", "gpio71", "gpio72";
-			function = "hdmi";
-		};
-
-		pinconf_ddc {
-			pins = "gpio70", "gpio71";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-
-		pinconf_hpd {
-			pins = "gpio72";
-			bias-pull-down;
-			drive-strength = <16>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
deleted file mode 100644
index 9244512b74d1e..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ /dev/null
@@ -1,389 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Sony Xperia Z";
-	compatible = "sony,xperia-yuga", "qcom,apq8064";
-	chassis-type = "handset";
-
-	aliases {
-		serial0 = &gsbi5_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		key-camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		key-camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		key-volume-down {
-			label = "volume_down";
-			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		key-volume-up {
-			label = "volume_up";
-			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-};
-
-&gsbi5 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-};
-
-&gsbi5_serial {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gsbi5_uart_pin_a>;
-	status = "okay";
-};
-
-&pm8921_gpio {
-	gpio_keys_pin_a: gpio-keys-active-state {
-		pins = "gpio3", "gpio4", "gpio29", "gpio35";
-		function = "normal";
-
-		bias-pull-up;
-		drive-push-pull;
-		input-enable;
-		power-source = <2>;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-		qcom,pull-up-strength = <0>;
-	};
-};
-
-&riva {
-	pinctrl-names = "default";
-	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
-	status = "okay";
-};
-
-&rpm {
-	regulators {
-		vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
-		vin_lvs_1_3_6-supply = <&pm8921_s4>;
-		vin_lvs_4_5_7-supply = <&pm8921_s4>;
-		vin_ncp-supply = <&pm8921_l6>;
-		vin_lvs2-supply = <&pm8921_s4>;
-		vin_l24-supply = <&pm8921_s1>;
-		vin_l25-supply = <&pm8921_s1>;
-		vin_l27-supply = <&pm8921_s7>;
-		vin_l28-supply = <&pm8921_s7>;
-
-		/* Buck SMPS */
-		s1 {
-			regulator-always-on;
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			qcom,switch-mode-frequency = <3200000>;
-			bias-pull-down;
-		};
-
-		s2 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-
-		s3 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1150000>;
-			qcom,switch-mode-frequency = <4800000>;
-			bias-pull-down;
-		};
-
-		s4 {
-			regulator-always-on;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
-		};
-
-		s7 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			qcom,switch-mode-frequency = <3200000>;
-		};
-
-		s8 {
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <2200000>;
-			qcom,switch-mode-frequency = <1600000>;
-		};
-
-		/* PMOS LDO */
-		l1 {
-			regulator-always-on;
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-			bias-pull-down;
-		};
-
-		l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-
-		l3 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-			bias-pull-down;
-		};
-
-		l4 {
-			regulator-always-on;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-
-		l5 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			bias-pull-down;
-		};
-
-		l6 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			bias-pull-down;
-		};
-
-		l7 {
-			regulator-min-microvolt = <1850000>;
-			regulator-max-microvolt = <2950000>;
-			bias-pull-down;
-		};
-
-		l8 {
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			bias-pull-down;
-		};
-
-		l9 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			bias-pull-down;
-		};
-
-		l10 {
-			regulator-min-microvolt = <2900000>;
-			regulator-max-microvolt = <2900000>;
-			bias-pull-down;
-		};
-
-		l11 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			bias-pull-down;
-		};
-
-		l12 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-
-		l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-
-		l15 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			bias-pull-down;
-		};
-
-		l16 {
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			bias-pull-down;
-		};
-
-		l17 {
-			regulator-min-microvolt = <2000000>;
-			regulator-max-microvolt = <2000000>;
-			bias-pull-down;
-		};
-
-		l18 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-
-		l21 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			bias-pull-down;
-		};
-
-		l22 {
-			regulator-min-microvolt = <2600000>;
-			regulator-max-microvolt = <2600000>;
-			bias-pull-down;
-		};
-
-		l23 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-
-		l24 {
-			regulator-min-microvolt = <750000>;
-			regulator-max-microvolt = <1150000>;
-			bias-pull-down;
-		};
-
-		l25 {
-			regulator-always-on;
-			regulator-min-microvolt = <1250000>;
-			regulator-max-microvolt = <1250000>;
-			bias-pull-down;
-		};
-
-		l27 {
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-		};
-
-		l28 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			bias-pull-down;
-		};
-
-		l29 {
-			regulator-min-microvolt = <2000000>;
-			regulator-max-microvolt = <2000000>;
-			bias-pull-down;
-		};
-
-		/* Low Voltage Switch */
-		lvs1 {
-			bias-pull-down;
-		};
-
-		lvs2 {
-			bias-pull-down;
-		};
-
-		lvs3 {
-			bias-pull-down;
-		};
-
-		lvs4 {
-			bias-pull-down;
-		};
-
-		lvs5 {
-			bias-pull-down;
-		};
-
-		lvs6 {
-			bias-pull-down;
-		};
-
-		lvs7 {
-			bias-pull-down;
-		};
-
-		usb-switch {};
-
-		hdmi-switch {};
-
-		ncp {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,switch-mode-frequency = <1600000>;
-		};
-	};
-};
-
-&sdcc1 {
-	vmmc-supply = <&pm8921_l5>;
-	vqmmc-supply = <&pm8921_s4>;
-	status = "okay";
-};
-
-&sdcc3 {
-	vmmc-supply = <&pm8921_l6>;
-	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
-
-	status = "okay";
-};
-
-&tlmm_pinmux {
-	gsbi5_uart_pin_a: gsbi5-uart-pin-active {
-		rx {
-			pins = "gpio52";
-			function = "gsbi5";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		tx {
-			pins = "gpio51";
-			function = "gsbi5";
-			drive-strength = <4>;
-			bias-disable;
-		};
-	};
-
-
-	sdcc3_cd_pin_a: sdcc3-cd-pin-active {
-		pins = "gpio26";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-	};
-};
-
-&usb_hs1_phy {
-	v3p3-supply = <&pm8921_l3>;
-	v1p8-supply = <&pm8921_l4>;
-};
-
-&usb1 {
-	dr_mode = "otg";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
deleted file mode 100644
index 46ed48f0244f2..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
+++ /dev/null
@@ -1,2 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064.dtsi"
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
deleted file mode 100644
index d2289205ff812..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ /dev/null
@@ -1,1896 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
-#include <dt-bindings/clock/qcom,lcc-msm8960.h>
-#include <dt-bindings/reset/qcom,gcc-msm8960.h>
-#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm APQ8064";
-	compatible = "qcom,apq8064";
-	interrupt-parent = <&intc>;
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		smem_region: smem@80000000 {
-			reg = <0x80000000 0x200000>;
-			no-map;
-		};
-
-		wcnss_mem: wcnss@8f000000 {
-			reg = <0x8f000000 0x700000>;
-			no-map;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU1: cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU2: cpu@2 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-			qcom,saw = <&saw2>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU3: cpu@3 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-			qcom,saw = <&saw3>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-			cache-unified;
-		};
-
-		idle-states {
-			CPU_SPC: spc {
-				compatible = "qcom,idle-state-spc",
-						"arm,idle-state";
-				entry-latency-us = <400>;
-				exit-latency-us = <900>;
-				min-residency-us = <3000>;
-			};
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	thermal-zones {
-		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 7>;
-			coefficients = <1199 0>;
-
-			trips {
-				cpu_alert0: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit0: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 8>;
-			coefficients = <1132 0>;
-
-			trips {
-				cpu_alert1: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit1: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 9>;
-			coefficients = <1199 0>;
-
-			trips {
-				cpu_alert2: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit2: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 10>;
-			coefficients = <1132 0>;
-
-			trips {
-				cpu_alert3: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit3: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
-	};
-
-	clocks {
-		cxo_board: cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		pxo_board: pxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	sfpb_mutex: hwmutex {
-		compatible = "qcom,sfpb-mutex";
-		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
-		#hwlock-cells = <1>;
-	};
-
-	smem {
-		compatible = "qcom,smem";
-		memory-region = <&smem_region>;
-
-		hwlocks = <&sfpb_mutex 3>;
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		modem-edge {
-			interrupts = <0 37 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&l2cc 8 3>;
-			qcom,smd-edge = <0>;
-
-			status = "disabled";
-		};
-
-		q6-edge {
-			interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&l2cc 8 15>;
-			qcom,smd-edge = <1>;
-
-			status = "disabled";
-		};
-
-		dsps-edge {
-			interrupts = <0 138 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&sps_sic_non_secure 0x4080 0>;
-			qcom,smd-edge = <3>;
-
-			status = "disabled";
-		};
-
-		riva-edge {
-			interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&l2cc 8 25>;
-			qcom,smd-edge = <6>;
-
-			status = "disabled";
-		};
-	};
-
-	smsm {
-		compatible = "qcom,smsm";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		qcom,ipc-1 = <&l2cc 8 4>;
-		qcom,ipc-2 = <&l2cc 8 14>;
-		qcom,ipc-3 = <&l2cc 8 23>;
-		qcom,ipc-4 = <&sps_sic_non_secure 0x4094 0>;
-
-		apps_smsm: apps@0 {
-			reg = <0>;
-			#qcom,smem-state-cells = <1>;
-		};
-
-		modem_smsm: modem@1 {
-			reg = <1>;
-			interrupts = <0 38 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		q6_smsm: q6@2 {
-			reg = <2>;
-			interrupts = <0 89 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		wcnss_smsm: wcnss@3 {
-			reg = <3>;
-			interrupts = <0 204 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		dsps_smsm: dsps@4 {
-			reg = <4>;
-			interrupts = <0 137 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-apq8064", "qcom,scm";
-
-			clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
-			clock-names = "core";
-		};
-	};
-
-
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Charger temperature */
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		tlmm_pinmux: pinctrl@800000 {
-			compatible = "qcom,apq8064-pinctrl";
-			reg = <0x800000 0x4000>;
-
-			gpio-controller;
-			gpio-ranges = <&tlmm_pinmux 0 0 90>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&ps_hold>;
-		};
-
-		sfpb_wrapper_mutex: syscon@1200000 {
-			compatible = "syscon";
-			reg = <0x01200000 0x8000>;
-		};
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-wdt-apq8064", "qcom,kpss-timer",
-				     "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>;
-			cpu-offset = <0x80000>;
-		};
-
-		acc0: clock-controller@2088000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu0_aux";
-			#clock-cells = <0>;
-		};
-
-		acc1: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu1_aux";
-			#clock-cells = <0>;
-		};
-
-		acc2: clock-controller@20a8000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu2_aux";
-			#clock-cells = <0>;
-		};
-
-		acc3: clock-controller@20b8000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu3_aux";
-			#clock-cells = <0>;
-		};
-
-		saw0: power-controller@2089000 {
-			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw1: power-controller@2099000 {
-			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw2: power-controller@20a9000 {
-			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
-			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw3: power-controller@20b9000 {
-			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
-			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		sps_sic_non_secure: sps-sic-non-secure@12100000 {
-			compatible = "syscon";
-			reg = <0x12100000 0x10000>;
-		};
-
-		gsbi1: gsbi@12440000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <1>;
-			reg = <0x12440000 0x100>;
-			clocks = <&gcc GSBI1_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi1_serial: serial@12450000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x12450000 0x100>,
-				      <0x12400000 0x03>;
-				interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi1_i2c: i2c@12460000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-1 = <&i2c1_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x12460000 0x1000>;
-				interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-		};
-
-		gsbi2: gsbi@12480000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <2>;
-			reg = <0x12480000 0x100>;
-			clocks = <&gcc GSBI2_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi2_i2c: i2c@124a0000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x124a0000 0x1000>;
-				pinctrl-0 = <&i2c2_pins>;
-				pinctrl-1 = <&i2c2_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi3: gsbi@16200000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <3>;
-			reg = <0x16200000 0x100>;
-			clocks = <&gcc GSBI3_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			gsbi3_i2c: i2c@16280000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c3_pins>;
-				pinctrl-1 = <&i2c3_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x16280000 0x1000>;
-				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI3_QUP_CLK>,
-					 <&gcc GSBI3_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi4: gsbi@16300000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <4>;
-			reg = <0x16300000 0x03>;
-			clocks = <&gcc GSBI4_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi4_i2c: i2c@16380000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c4_pins>;
-				pinctrl-1 = <&i2c4_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x16380000 0x1000>;
-				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI4_QUP_CLK>,
-					 <&gcc GSBI4_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		gsbi5: gsbi@1a200000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x1a200000 0x03>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi5_serial: serial@1a240000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x1a240000 0x100>,
-				      <0x1a200000 0x03>;
-				interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi5_spi: spi@1a280000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				reg = <0x1a280000 0x1000>;
-				interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-0 = <&spi5_default>;
-				pinctrl-1 = <&spi5_sleep>;
-				pinctrl-names = "default", "sleep";
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		gsbi6: gsbi@16500000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <6>;
-			reg = <0x16500000 0x03>;
-			clocks = <&gcc GSBI6_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi6_serial: serial@16540000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16540000 0x100>,
-				      <0x16500000 0x03>;
-				interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi6_i2c: i2c@16580000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c6_pins>;
-				pinctrl-1 = <&i2c6_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x16580000 0x1000>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI6_QUP_CLK>,
-					 <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		gsbi7: gsbi@16600000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <7>;
-			reg = <0x16600000 0x100>;
-			clocks = <&gcc GSBI7_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			syscon-tcsr = <&tcsr>;
-
-			gsbi7_serial: serial@16640000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16640000 0x1000>,
-				      <0x16600000 0x1000>;
-				interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi7_i2c: i2c@16680000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c7_pins>;
-				pinctrl-1 = <&i2c7_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x16680000 0x1000>;
-				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_QUP_CLK>,
-					 <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
-		};
-
-		ssbi@c00000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00c00000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-
-			pm8821: pmic {
-				compatible = "qcom,pm8821";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8821_mpps: mpps@50 {
-					compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
-					reg = <0x50>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8821_mpps 0 0 4>;
-				};
-			};
-		};
-
-		ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <74 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8921_gpio: gpio@150 {
-
-					compatible = "qcom,pm8921-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8921_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8921_mpps: mpps@50 {
-					compatible = "qcom,pm8921-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8921_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 1>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8921-adc";
-					reg = <197>;
-					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					batt_therm: adc-channel@8 {
-						reg = <0x00 0x08>;
-					};
-					batt_id: adc-channel@9 {
-						reg = <0x00 0x09>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					chg_temp: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-			};
-		};
-
-		qfprom: qfprom@700000 {
-			compatible = "qcom,apq8064-qfprom", "qcom,qfprom";
-			reg = <0x00700000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			tsens_calib: calib@404 {
-				reg = <0x404 0x10>;
-			};
-			tsens_backup: backup_calib@414 {
-				reg = <0x414 0x10>;
-			};
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-apq8064", "syscon";
-			reg = <0x00900000 0x4000>;
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			clocks = <&cxo_board>,
-				 <&pxo_board>,
-				 <&lcc PLL4>;
-			clock-names = "cxo", "pxo", "pll4";
-
-			tsens: thermal-sensor {
-				compatible = "qcom,msm8960-tsens";
-
-				nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-				nvmem-cell-names = "calib", "calib_backup";
-				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "uplow";
-
-				#qcom,sensors = <11>;
-				#thermal-sensor-cells = <1>;
-			};
-		};
-
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-apq8064";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			clocks = <&pxo_board>,
-				 <&gcc PLL4_VOTE>,
-				 <0>,
-				 <0>, <0>,
-				 <0>, <0>,
-				 <0>;
-			clock-names = "pxo",
-				      "pll4_vote",
-				      "mi2s_codec_clk",
-				      "codec_i2s_mic_codec_clk",
-				      "spare_i2s_mic_codec_clk",
-				      "codec_i2s_spkr_codec_clk",
-				      "spare_i2s_spkr_codec_clk",
-				      "pcm_codec_clk";
-		};
-
-		mmcc: clock-controller@4000000 {
-			compatible = "qcom,mmcc-apq8064";
-			reg = <0x4000000 0x1000>;
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			clocks = <&pxo_board>,
-				 <&gcc PLL3>,
-				 <&gcc PLL8_VOTE>,
-				 <&dsi0_phy 1>,
-				 <&dsi0_phy 0>,
-				 <&dsi1_phy 1>,
-				 <&dsi1_phy 0>,
-				 <&hdmi_phy>;
-			clock-names = "pxo",
-				      "pll3",
-				      "pll8_vote",
-				      "dsi1pll",
-				      "dsi1pllbyte",
-				      "dsi2pll",
-				      "dsi2pllbyte",
-				      "hdmipll";
-		};
-
-		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc", "syscon";
-			reg = <0x2011000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			#clock-cells = <0>;
-		};
-
-		rpm: rpm@108000 {
-			compatible = "qcom,rpm-apq8064";
-			reg = <0x108000 0x1000>;
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ack", "err", "wakeup";
-
-			rpmcc: clock-controller {
-				compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
-				#clock-cells = <1>;
-				clocks = <&pxo_board>, <&cxo_board>;
-				clock-names = "pxo", "cxo";
-			};
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-
-				pm8921_s1: s1 {};
-				pm8921_s2: s2 {};
-				pm8921_s3: s3 {};
-				pm8921_s4: s4 {};
-				pm8921_s7: s7 {};
-				pm8921_s8: s8 {};
-
-				pm8921_l1: l1 {};
-				pm8921_l2: l2 {};
-				pm8921_l3: l3 {};
-				pm8921_l4: l4 {};
-				pm8921_l5: l5 {};
-				pm8921_l6: l6 {};
-				pm8921_l7: l7 {};
-				pm8921_l8: l8 {};
-				pm8921_l9: l9 {};
-				pm8921_l10: l10 {};
-				pm8921_l11: l11 {};
-				pm8921_l12: l12 {};
-				pm8921_l14: l14 {};
-				pm8921_l15: l15 {};
-				pm8921_l16: l16 {};
-				pm8921_l17: l17 {};
-				pm8921_l18: l18 {};
-				pm8921_l21: l21 {};
-				pm8921_l22: l22 {};
-				pm8921_l23: l23 {};
-				pm8921_l24: l24 {};
-				pm8921_l25: l25 {};
-				pm8921_l26: l26 {};
-				pm8921_l27: l27 {};
-				pm8921_l28: l28 {};
-				pm8921_l29: l29 {};
-
-				pm8921_lvs1: lvs1 {};
-				pm8921_lvs2: lvs2 {};
-				pm8921_lvs3: lvs3 {};
-				pm8921_lvs4: lvs4 {};
-				pm8921_lvs5: lvs5 {};
-				pm8921_lvs6: lvs6 {};
-				pm8921_lvs7: lvs7 {};
-
-				pm8921_usb_switch: usb-switch {};
-
-				pm8921_hdmi_switch: hdmi-switch {
-					bias-pull-down;
-				};
-
-				pm8921_ncp: ncp {};
-			};
-		};
-
-		usb1: usb@12500000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0x12500000 0x200>,
-			      <0x12500200 0x200>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
-			clock-names = "core", "iface";
-			assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
-			assigned-clock-rates = <60000000>;
-			resets = <&gcc USB_HS1_RESET>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			ahb-burst-config = <0>;
-			phys = <&usb_hs1_phy>;
-			phy-names = "usb-phy";
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs1_phy: phy {
-					compatible = "qcom,usb-hs-phy-apq8064",
-						     "qcom,usb-hs-phy";
-					clocks = <&sleep_clk>, <&cxo_board>;
-					clock-names = "sleep", "ref";
-					resets = <&usb1 0>;
-					reset-names = "por";
-					#phy-cells = <0>;
-				};
-			};
-		};
-
-		usb3: usb@12520000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0x12520000 0x200>,
-			      <0x12520200 0x200>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>;
-			clock-names = "core", "iface";
-			assigned-clocks = <&gcc USB_HS3_XCVR_CLK>;
-			assigned-clock-rates = <60000000>;
-			resets = <&gcc USB_HS3_RESET>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			ahb-burst-config = <0>;
-			phys = <&usb_hs3_phy>;
-			phy-names = "usb-phy";
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs3_phy: phy {
-					compatible = "qcom,usb-hs-phy-apq8064",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&sleep_clk>, <&cxo_board>;
-					clock-names = "sleep", "ref";
-					resets = <&usb3 0>;
-					reset-names = "por";
-				};
-			};
-		};
-
-		usb4: usb@12530000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0x12530000 0x200>,
-			      <0x12530200 0x200>;
-			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>;
-			clock-names = "core", "iface";
-			assigned-clocks = <&gcc USB_HS4_XCVR_CLK>;
-			assigned-clock-rates = <60000000>;
-			resets = <&gcc USB_HS4_RESET>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			ahb-burst-config = <0>;
-			phys = <&usb_hs4_phy>;
-			phy-names = "usb-phy";
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs4_phy: phy {
-					compatible = "qcom,usb-hs-phy-apq8064",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&sleep_clk>, <&cxo_board>;
-					clock-names = "sleep", "ref";
-					resets = <&usb4 0>;
-					reset-names = "por";
-				};
-			};
-		};
-
-		sata_phy0: phy@1b400000 {
-			compatible = "qcom,apq8064-sata-phy";
-			status = "disabled";
-			reg = <0x1b400000 0x200>;
-			reg-names = "phy_mem";
-			clocks = <&gcc SATA_PHY_CFG_CLK>;
-			clock-names = "cfg";
-			#phy-cells = <0>;
-		};
-
-		sata0: sata@29000000 {
-			compatible = "qcom,apq8064-ahci", "generic-ahci";
-			status	 = "disabled";
-			reg	 = <0x29000000 0x180>;
-			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&gcc SFAB_SATA_S_H_CLK>,
-				 <&gcc SATA_H_CLK>,
-				 <&gcc SATA_A_CLK>,
-				 <&gcc SATA_RXOOB_CLK>,
-				 <&gcc SATA_PMALIVE_CLK>;
-			clock-names = "slave_iface",
-				      "iface",
-				      "bus",
-				      "rxoob",
-				      "core_pmalive";
-
-			assigned-clocks = <&gcc SATA_RXOOB_CLK>,
-					  <&gcc SATA_PMALIVE_CLK>;
-			assigned-clock-rates = <100000000>, <100000000>;
-
-			phys = <&sata_phy0>;
-			phy-names = "sata-phy";
-			ports-implemented = <0x1>;
-		};
-
-		sdcc3: mmc@12180000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00051180>;
-			status = "disabled";
-			reg = <0x12180000 0x2000>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-			clock-names = "mclk", "apb_pclk";
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <192000000>;
-			no-1-8-v;
-			dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-			dma-names = "tx", "rx";
-		};
-
-		sdcc3bam: dma-controller@12182000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12182000 0x8000>;
-			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC3_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc4: mmc@121c0000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00051180>;
-			status = "disabled";
-			reg = <0x121c0000 0x2000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
-			clock-names = "mclk", "apb_pclk";
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <48000000>;
-			dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdc4_gpios>;
-		};
-
-		sdcc4bam: dma-controller@121c2000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x121c2000 0x8000>;
-			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC4_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc1: mmc@12400000 {
-			status = "disabled";
-			compatible = "arm,pl18x", "arm,primecell";
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdcc1_pins>;
-			arm,primecell-periphid = <0x00051180>;
-			reg = <0x12400000 0x2000>;
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-			clock-names = "mclk", "apb_pclk";
-			bus-width = <8>;
-			max-frequency = <96000000>;
-			non-removable;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-			dma-names = "tx", "rx";
-		};
-
-		sdcc1bam: dma-controller@12402000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-apq8064", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-
-		gpu: adreno-3xx@4300000 {
-			compatible = "qcom,adreno-320.2", "qcom,adreno";
-			reg = <0x04300000 0x20000>;
-			reg-names = "kgsl_3d0_reg_memory";
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "kgsl_3d0_irq";
-			clock-names =
-			    "core",
-			    "iface",
-			    "mem",
-			    "mem_iface";
-			clocks =
-			    <&mmcc GFX3D_CLK>,
-			    <&mmcc GFX3D_AHB_CLK>,
-			    <&mmcc GFX3D_AXI_CLK>,
-			    <&mmcc MMSS_IMEM_AHB_CLK>;
-
-			iommus = <&gfx3d 0
-				  &gfx3d 1
-				  &gfx3d 2
-				  &gfx3d 3
-				  &gfx3d 4
-				  &gfx3d 5
-				  &gfx3d 6
-				  &gfx3d 7
-				  &gfx3d 8
-				  &gfx3d 9
-				  &gfx3d 10
-				  &gfx3d 11
-				  &gfx3d 12
-				  &gfx3d 13
-				  &gfx3d 14
-				  &gfx3d 15
-				  &gfx3d 16
-				  &gfx3d 17
-				  &gfx3d 18
-				  &gfx3d 19
-				  &gfx3d 20
-				  &gfx3d 21
-				  &gfx3d 22
-				  &gfx3d 23
-				  &gfx3d 24
-				  &gfx3d 25
-				  &gfx3d 26
-				  &gfx3d 27
-				  &gfx3d 28
-				  &gfx3d 29
-				  &gfx3d 30
-				  &gfx3d 31
-				  &gfx3d1 0
-				  &gfx3d1 1
-				  &gfx3d1 2
-				  &gfx3d1 3
-				  &gfx3d1 4
-				  &gfx3d1 5
-				  &gfx3d1 6
-				  &gfx3d1 7
-				  &gfx3d1 8
-				  &gfx3d1 9
-				  &gfx3d1 10
-				  &gfx3d1 11
-				  &gfx3d1 12
-				  &gfx3d1 13
-				  &gfx3d1 14
-				  &gfx3d1 15
-				  &gfx3d1 16
-				  &gfx3d1 17
-				  &gfx3d1 18
-				  &gfx3d1 19
-				  &gfx3d1 20
-				  &gfx3d1 21
-				  &gfx3d1 22
-				  &gfx3d1 23
-				  &gfx3d1 24
-				  &gfx3d1 25
-				  &gfx3d1 26
-				  &gfx3d1 27
-				  &gfx3d1 28
-				  &gfx3d1 29
-				  &gfx3d1 30
-				  &gfx3d1 31>;
-
-			operating-points-v2 = <&gpu_opp_table>;
-
-			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-450000000 {
-					opp-hz = /bits/ 64 <450000000>;
-				};
-
-				opp-27000000 {
-					opp-hz = /bits/ 64 <27000000>;
-				};
-			};
-		};
-
-		mmss_sfpb: syscon@5700000 {
-			compatible = "syscon";
-			reg = <0x5700000 0x70>;
-		};
-
-		dsi0: dsi@4700000 {
-			compatible = "qcom,apq8064-dsi-ctrl",
-				     "qcom,mdss-dsi-ctrl";
-			label = "MDSS DSI CTRL->0";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x04700000 0x200>;
-			reg-names = "dsi_ctrl";
-
-			clocks = <&mmcc DSI_M_AHB_CLK>,
-				<&mmcc DSI_S_AHB_CLK>,
-				<&mmcc AMP_AHB_CLK>,
-				<&mmcc DSI_CLK>,
-				<&mmcc DSI1_BYTE_CLK>,
-				<&mmcc DSI_PIXEL_CLK>,
-				<&mmcc DSI1_ESC_CLK>;
-			clock-names = "iface", "bus", "core_mmss",
-					"src", "byte", "pixel",
-					"core";
-
-			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
-					<&mmcc DSI1_ESC_SRC>,
-					<&mmcc DSI_SRC>,
-					<&mmcc DSI_PIXEL_SRC>;
-			assigned-clock-parents = <&dsi0_phy 0>,
-						<&dsi0_phy 0>,
-						<&dsi0_phy 1>,
-						<&dsi0_phy 1>;
-			syscon-sfpb = <&mmss_sfpb>;
-			phys = <&dsi0_phy>;
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					dsi0_in: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					dsi0_out: endpoint {
-					};
-				};
-			};
-		};
-
-
-		dsi0_phy: phy@4700200 {
-			compatible = "qcom,dsi-phy-28nm-8960";
-			#clock-cells = <1>;
-			#phy-cells = <0>;
-
-			reg = <0x04700200 0x100>,
-				<0x04700300 0x200>,
-				<0x04700500 0x5c>;
-			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
-			clock-names = "iface", "ref";
-			clocks = <&mmcc DSI_M_AHB_CLK>,
-				 <&pxo_board>;
-			status = "disabled";
-		};
-
-		dsi1: dsi@5800000 {
-			compatible = "qcom,mdss-dsi-ctrl";
-			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x05800000 0x200>;
-			reg-names = "dsi_ctrl";
-
-			clocks = <&mmcc DSI2_M_AHB_CLK>,
-				 <&mmcc DSI2_S_AHB_CLK>,
-				 <&mmcc AMP_AHB_CLK>,
-				 <&mmcc DSI2_CLK>,
-				 <&mmcc DSI2_BYTE_CLK>,
-				 <&mmcc DSI2_PIXEL_CLK>,
-				 <&mmcc DSI2_ESC_CLK>;
-			clock-names = "iface",
-				      "bus",
-				      "core_mmss",
-				      "src",
-				      "byte",
-				      "pixel",
-				      "core";
-
-			assigned-clocks = <&mmcc DSI2_BYTE_SRC>,
-					  <&mmcc DSI2_ESC_SRC>,
-					  <&mmcc DSI2_SRC>,
-					  <&mmcc DSI2_PIXEL_SRC>;
-			assigned-clock-parents = <&dsi1_phy 0>,
-						 <&dsi1_phy 0>,
-						 <&dsi1_phy 1>,
-						 <&dsi1_phy 1>;
-
-			syscon-sfpb = <&mmss_sfpb>;
-			phys = <&dsi1_phy>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					dsi1_in: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					dsi1_out: endpoint {
-					};
-				};
-			};
-		};
-
-
-		dsi1_phy: dsi-phy@5800200 {
-			compatible = "qcom,dsi-phy-28nm-8960";
-			reg = <0x05800200 0x100>,
-			      <0x05800300 0x200>,
-			      <0x05800500 0x5c>;
-			reg-names = "dsi_pll",
-				    "dsi_phy",
-				    "dsi_phy_regulator";
-			clock-names = "iface",
-				      "ref";
-			clocks = <&mmcc DSI2_M_AHB_CLK>,
-				 <&pxo_board>;
-			#clock-cells = <1>;
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		mdp_port0: iommu@7500000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "iommu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc MDP_AXI_CLK>;
-			reg = <0x07500000 0x100000>;
-			interrupts =
-			    <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
-			    <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ncb = <2>;
-		};
-
-		mdp_port1: iommu@7600000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "iommu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc MDP_AXI_CLK>;
-			reg = <0x07600000 0x100000>;
-			interrupts =
-			    <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
-			    <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ncb = <2>;
-		};
-
-		gfx3d: iommu@7c00000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "iommu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc GFX3D_AXI_CLK>;
-			reg = <0x07c00000 0x100000>;
-			interrupts =
-			    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ncb = <3>;
-		};
-
-		gfx3d1: iommu@7d00000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "iommu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc GFX3D_AXI_CLK>;
-			reg = <0x07d00000 0x100000>;
-			interrupts =
-			    <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-			    <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ncb = <3>;
-		};
-
-		pcie: pci@1b500000 {
-			compatible = "qcom,pcie-apq8064";
-			reg = <0x1b500000 0x1000>,
-			      <0x1b502000 0x80>,
-			      <0x1b600000 0x100>,
-			      <0x0ff00000 0x100000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <0>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00100000>, /* I/O */
-				 <0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* mem */
-			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-			clocks = <&gcc PCIE_A_CLK>,
-				 <&gcc PCIE_H_CLK>,
-				 <&gcc PCIE_PHY_REF_CLK>;
-			clock-names = "core", "iface", "phy";
-			resets = <&gcc PCIE_ACLK_RESET>,
-				 <&gcc PCIE_HCLK_RESET>,
-				 <&gcc PCIE_POR_RESET>,
-				 <&gcc PCIE_PCI_RESET>,
-				 <&gcc PCIE_PHY_RESET>;
-			reset-names = "axi", "ahb", "por", "pci", "phy";
-			status = "disabled";
-		};
-
-		hdmi: hdmi-tx@4a00000 {
-			compatible = "qcom,hdmi-tx-8960";
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdmi_pinctrl>;
-			reg = <0x04a00000 0x2f0>;
-			reg-names = "core_physical";
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mmcc HDMI_APP_CLK>,
-				 <&mmcc HDMI_M_AHB_CLK>,
-				 <&mmcc HDMI_S_AHB_CLK>;
-			clock-names = "core",
-				      "master_iface",
-				      "slave_iface";
-
-			phys = <&hdmi_phy>;
-
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					hdmi_in: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					hdmi_out: endpoint {
-					};
-				};
-			};
-		};
-
-		hdmi_phy: phy@4a00400 {
-			compatible = "qcom,hdmi-phy-8960";
-			reg = <0x4a00400 0x60>,
-			      <0x4a00500 0x100>;
-			reg-names = "hdmi_phy",
-				    "hdmi_pll";
-
-			clocks = <&mmcc HDMI_S_AHB_CLK>;
-			clock-names = "slave_iface";
-			#phy-cells = <0>;
-			#clock-cells = <0>;
-
-			status = "disabled";
-		};
-
-		mdp: display-controller@5100000 {
-			compatible = "qcom,mdp4";
-			reg = <0x05100000 0xf0000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mmcc MDP_CLK>,
-				 <&mmcc MDP_AHB_CLK>,
-				 <&mmcc MDP_AXI_CLK>,
-				 <&mmcc MDP_LUT_CLK>,
-				 <&mmcc HDMI_TV_CLK>,
-				 <&mmcc MDP_TV_CLK>;
-			clock-names = "core_clk",
-				      "iface_clk",
-				      "bus_clk",
-				      "lut_clk",
-				      "hdmi_clk",
-				      "tv_clk";
-
-			iommus = <&mdp_port0 0
-				  &mdp_port0 2
-				  &mdp_port1 0
-				  &mdp_port1 2>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					mdp_lvds_out: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					mdp_dsi1_out: endpoint {
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					mdp_dsi2_out: endpoint {
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-					mdp_dtv_out: endpoint {
-					};
-				};
-			};
-		};
-
-		riva: riva-pil@3200800 {
-			compatible = "qcom,riva-pil";
-
-			reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
-			reg-names = "ccu", "dxe", "pmu";
-
-			interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal";
-
-			memory-region = <&wcnss_mem>;
-
-			vddcx-supply = <&pm8921_s3>;
-			vddmx-supply = <&pm8921_l24>;
-			vddpx-supply = <&pm8921_s4>;
-
-			status = "disabled";
-
-			iris {
-				compatible = "qcom,wcn3660";
-
-				clocks = <&cxo_board>;
-				clock-names = "xo";
-
-				vddxo-supply = <&pm8921_l4>;
-				vddrfa-supply = <&pm8921_s2>;
-				vddpa-supply = <&pm8921_l10>;
-				vdddig-supply = <&pm8921_lvs2>;
-			};
-
-			smd-edge {
-				interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,ipc = <&l2cc 8 25>;
-				qcom,smd-edge = <6>;
-
-				label = "riva";
-
-				wcnss {
-					compatible = "qcom,wcnss";
-					qcom,smd-channels = "WCNSS_CTRL";
-
-					qcom,mmio = <&riva>;
-
-					bluetooth {
-						compatible = "qcom,wcnss-bt";
-					};
-
-					wifi {
-						compatible = "qcom,wcnss-wlan";
-
-						interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-							     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
-						interrupt-names = "tx", "rx";
-
-						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
-						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
-					};
-				};
-			};
-		};
-
-		etb@1a01000 {
-			compatible = "arm,coresight-etb10", "arm,primecell";
-			reg = <0x1a01000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				port {
-					etb_in: endpoint {
-						remote-endpoint = <&replicator_out0>;
-					};
-				};
-			};
-		};
-
-		tpiu@1a03000 {
-			compatible = "arm,coresight-tpiu", "arm,primecell";
-			reg = <0x1a03000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				port {
-					tpiu_in: endpoint {
-						remote-endpoint = <&replicator_out1>;
-					};
-				};
-			};
-		};
-
-		replicator {
-			compatible = "arm,coresight-static-replicator";
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					replicator_out0: endpoint {
-						remote-endpoint = <&etb_in>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					replicator_out1: endpoint {
-						remote-endpoint = <&tpiu_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint = <&funnel_out>;
-					};
-				};
-			};
-		};
-
-		funnel@1a04000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x1a04000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/*
-				 * Not described input ports:
-				 * 2 - connected to STM component
-				 * 3 - not-connected
-				 * 6 - not-connected
-				 * 7 - not-connected
-				 */
-				port@0 {
-					reg = <0>;
-					funnel_in0: endpoint {
-						remote-endpoint = <&etm0_out>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					funnel_in1: endpoint {
-						remote-endpoint = <&etm1_out>;
-					};
-				};
-				port@4 {
-					reg = <4>;
-					funnel_in4: endpoint {
-						remote-endpoint = <&etm2_out>;
-					};
-				};
-				port@5 {
-					reg = <5>;
-					funnel_in5: endpoint {
-						remote-endpoint = <&etm3_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					funnel_out: endpoint {
-						remote-endpoint = <&replicator_in>;
-					};
-				};
-			};
-		};
-
-		etm@1a1c000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x1a1c000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU0>;
-
-			out-ports {
-				port {
-					etm0_out: endpoint {
-						remote-endpoint = <&funnel_in0>;
-					};
-				};
-			};
-		};
-
-		etm@1a1d000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x1a1d000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU1>;
-
-			out-ports {
-				port {
-					etm1_out: endpoint {
-						remote-endpoint = <&funnel_in1>;
-					};
-				};
-			};
-		};
-
-		etm@1a1e000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x1a1e000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU2>;
-
-			out-ports {
-				port {
-					etm2_out: endpoint {
-						remote-endpoint = <&funnel_in4>;
-					};
-				};
-			};
-		};
-
-		etm@1a1f000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x1a1f000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU3>;
-
-			out-ports {
-				port {
-					etm3_out: endpoint {
-						remote-endpoint = <&funnel_in5>;
-					};
-				};
-			};
-		};
-	};
-};
-#include "qcom-apq8064-pins.dtsi"
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
deleted file mode 100644
index 1345df7cbd002..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ /dev/null
@@ -1,307 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/gpio/gpio.h>
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-
-/ {
-	model = "Qualcomm APQ8074 Dragonboard";
-	compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-		usid0 = &pm8941_0;
-		usid4 = &pm8841_0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
-
-&blsp2_i2c5 {
-	status = "okay";
-	clock-frequency = <200000>;
-
-	eeprom: eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-		pagesize = <32>;
-		read-only;
-	};
-};
-
-&rpm_requests {
-	regulators-0 {
-		compatible = "qcom,rpm-pm8841-regulators";
-
-		pm8841_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s2: s2 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s3: s3 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s4: s4 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,rpm-pm8941-regulators";
-
-		vdd_l1_l3-supply = <&pm8941_s1>;
-		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-		vdd_l4_l11-supply = <&pm8941_s1>;
-		vdd_l5_l7-supply = <&pm8941_s2>;
-		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-		vin_5vs-supply = <&pm8941_5v>;
-
-		pm8941_s1: s1 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s2: s2 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-			regulator-boot-on;
-		};
-
-		pm8941_s3: s3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l3: l3 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l4: l4 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8941_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		pm8941_l11: l11 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pm8941_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8941_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l17: l17 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l19: l19 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		pm8941_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-			regulator-boot-on;
-		};
-
-		pm8941_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8941_l23: l23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8941_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-			regulator-boot-on;
-		};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l20>;
-	vqmmc-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&pm8941_l21>;
-	vqmmc-supply = <&pm8941_l13>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-};
-
-&tlmm {
-	sdc1_on: sdc1-on-state {
-		clk-pins {
-			pins = "sdc1_clk";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	sdc2_on: sdc2-on-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			drive-strength = <10>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-
-		cd-pins {
-			pins = "gpio62";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-};
-
-&usb {
-	status = "okay";
-
-	phys = <&usb_hs2_phy>;
-	phy-select = <&tcsr 0xb000 1>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-};
-
-&usb_hs2_phy {
-	status = "okay";
-	v3p3-supply = <&pm8941_l24>;
-	v1p8-supply = <&pm8941_l6>;
-	extcon = <&smbb>;
-	qcom,init-seq = /bits/ 8 <0x1 0x63>;
-};
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
deleted file mode 100644
index 116e59a3b76d0..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
-
-/ {
-	model = "Qualcomm APQ8084/IFC6540";
-	compatible = "qcom,apq8084-sbc", "qcom,apq8084";
-
-	aliases {
-		serial0 = &blsp2_uart2;
-		usid0 = &pma8084_0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		serial@f995e000 {
-			status = "okay";
-		};
-	};
-};
-
-&sdhc_1 {
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&sdhc_2 {
-	cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-};
diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
deleted file mode 100644
index c6b6680248a69..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
-
-/ {
-	model = "Qualcomm APQ 8084-MTP";
-	compatible = "qcom,apq8084-mtp", "qcom,apq8084";
-
-	aliases {
-		serial0 = &blsp2_uart2;
-		usid0 = &pma8084_0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		serial@f995e000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
deleted file mode 100644
index 83839e1ec4d16..0000000000000
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ /dev/null
@@ -1,853 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-apq8084.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm APQ 8084";
-	compatible = "qcom,apq8084";
-	interrupt-parent = <&intc>;
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		smem_mem: smem_region@fa00000 {
-			reg = <0xfa00000 0x200000>;
-			no-map;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <0>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <1>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <2>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-			qcom,saw = <&saw2>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <3>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-			qcom,saw = <&saw3>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-			cache-unified;
-			qcom,saw = <&saw_l2>;
-		};
-
-		idle-states {
-			CPU_SPC: spc {
-				compatible = "qcom,idle-state-spc",
-						"arm,idle-state";
-				entry-latency-us = <150>;
-				exit-latency-us = <200>;
-				min-residency-us = <2000>;
-			};
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-apq8084", "qcom,scm";
-			clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-		};
-	};
-
-	thermal-zones {
-		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu_alert0: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit0: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 6>;
-
-			trips {
-				cpu_alert1: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit1: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 7>;
-
-			trips {
-				cpu_alert2: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit2: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 8>;
-
-			trips {
-				cpu_alert3: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit3: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 7 0xf04>;
-	};
-
-	clocks {
-		xo_board: xo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 2 0xf08>,
-			     <GIC_PPI 3 0xf08>,
-			     <GIC_PPI 4 0xf08>,
-			     <GIC_PPI 1 0xf08>;
-		clock-frequency = <19200000>;
-	};
-
-	smem {
-		compatible = "qcom,smem";
-
-		qcom,rpm-msg-ram = <&rpm_msg_ram>;
-		memory-region = <&smem_mem>;
-
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@f9000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0xf9000000 0x1000>,
-			      <0xf9002000 0x1000>;
-		};
-
-		apcs: syscon@f9011000 {
-			compatible = "syscon";
-			reg = <0xf9011000 0x1000>;
-		};
-
-		sram@fc190000 {
-			compatible = "qcom,apq8084-rpm-stats";
-			reg = <0xfc190000 0x10000>;
-		};
-
-		qfprom: qfprom@fc4bc000 {
-			compatible = "qcom,apq8084-qfprom", "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			tsens_base1: base1@d0 {
-				reg = <0xd0 0x1>;
-				bits = <0 8>;
-			};
-
-			tsens_s0_p1: s0-p1@d1 {
-				reg = <0xd1 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s1_p1: s1-p1@d2 {
-				reg = <0xd1 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s2_p1: s2-p1@d2 {
-				reg = <0xd2 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s3_p1: s3-p1@d3 {
-				reg = <0xd3 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_s4_p1: s4-p1@d4 {
-				reg = <0xd4 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s5_p1: s5-p1@d4 {
-				reg = <0xd4 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s6_p1: s6-p1@d5 {
-				reg = <0xd5 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s7_p1: s7-p1@d6 {
-				reg = <0xd6 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_s8_p1: s8-p1@d7 {
-				reg = <0xd7 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_mode: mode@d7 {
-				reg = <0xd7 0x1>;
-				bits = <6 2>;
-			};
-
-			tsens_s9_p1: s9-p1@d8 {
-				reg = <0xd8 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s10_p1: s10_p1@d8 {
-				reg = <0xd8 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_base2: base2@d9 {
-				reg = <0xd9 0x2>;
-				bits = <4 8>;
-			};
-
-			tsens_s0_p2: s0-p2@da {
-				reg = <0xda 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s1_p2: s1-p2@db {
-				reg = <0xdb 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_s2_p2: s2-p2@dc {
-				reg = <0xdc 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s3_p2: s3-p2@dc {
-				reg = <0xdc 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s4_p2: s4-p2@dd {
-				reg = <0xdd 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s5_p2: s5-p2@de {
-				reg = <0xde 0x2>;
-				bits = <2 6>;
-			};
-
-			tsens_s6_p2: s6-p2@df {
-				reg = <0xdf 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s7_p2: s7-p2@e0 {
-				reg = <0xe0 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s8_p2: s8-p2@e0 {
-				reg = <0xe0 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s9_p2: s9-p2@e1 {
-				reg = <0xe1 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s10_p2: s10_p2@e2 {
-				reg = <0xe2 0x2>;
-				bits = <2 6>;
-			};
-
-			tsens_s5_p2_backup: s5-p2_backup@e3 {
-				reg = <0xe3 0x2>;
-				bits = <0 6>;
-			};
-
-			tsens_mode_backup: mode_backup@e3 {
-				reg = <0xe3 0x1>;
-				bits = <6 2>;
-			};
-
-			tsens_s6_p2_backup: s6-p2_backup@e4 {
-				reg = <0xe4 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s7_p2_backup: s7-p2_backup@e4 {
-				reg = <0xe4 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s8_p2_backup: s8-p2_backup@e5 {
-				reg = <0xe5 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s9_p2_backup: s9-p2_backup@e6 {
-				reg = <0xe6 0x2>;
-				bits = <2 6>;
-			};
-
-			tsens_s10_p2_backup: s10_p2_backup@e7 {
-				reg = <0xe7 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_base1_backup: base1_backup@440 {
-				reg = <0x440 0x1>;
-				bits = <0 8>;
-			};
-
-			tsens_s0_p1_backup: s0-p1_backup@441 {
-				reg = <0x441 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s1_p1_backup: s1-p1_backup@442 {
-				reg = <0x441 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s2_p1_backup: s2-p1_backup@442 {
-				reg = <0x442 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s3_p1_backup: s3-p1_backup@443 {
-				reg = <0x443 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_s4_p1_backup: s4-p1_backup@444 {
-				reg = <0x444 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s5_p1_backup: s5-p1_backup@444 {
-				reg = <0x444 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s6_p1_backup: s6-p1_backup@445 {
-				reg = <0x445 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s7_p1_backup: s7-p1_backup@446 {
-				reg = <0x446 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_use_backup: use_backup@447 {
-				reg = <0x447 0x1>;
-				bits = <5 3>;
-			};
-
-			tsens_s8_p1_backup: s8-p1_backup@448 {
-				reg = <0x448 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s9_p1_backup: s9-p1_backup@448 {
-				reg = <0x448 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s10_p1_backup: s10_p1_backup@449 {
-				reg = <0x449 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_base2_backup: base2_backup@44a {
-				reg = <0x44a 0x2>;
-				bits = <2 8>;
-			};
-
-			tsens_s0_p2_backup: s0-p2_backup@44b {
-				reg = <0x44b 0x3>;
-				bits = <2 6>;
-			};
-
-			tsens_s1_p2_backup: s1-p2_backup@44c {
-				reg = <0x44c 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s2_p2_backup: s2-p2_backup@44c {
-				reg = <0x44c 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s3_p2_backup: s3-p2_backup@44d {
-				reg = <0x44d 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s4_p2_backup: s4-p2_backup@44e {
-				reg = <0x44e 0x1>;
-				bits = <2 6>;
-			};
-		};
-
-		tsens: thermal-sensor@fc4a8000 {
-			compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
-			reg = <0xfc4a9000 0x1000>, /* TM */
-			      <0xfc4a8000 0x1000>; /* SROT */
-			nvmem-cells = <&tsens_mode>,
-				      <&tsens_base1>, <&tsens_base2>,
-				      <&tsens_use_backup>,
-				      <&tsens_mode_backup>,
-				      <&tsens_base1_backup>, <&tsens_base2_backup>,
-				      <&tsens_s0_p1>, <&tsens_s0_p2>,
-				      <&tsens_s1_p1>, <&tsens_s1_p2>,
-				      <&tsens_s2_p1>, <&tsens_s2_p2>,
-				      <&tsens_s3_p1>, <&tsens_s3_p2>,
-				      <&tsens_s4_p1>, <&tsens_s4_p2>,
-				      <&tsens_s5_p1>, <&tsens_s5_p2>,
-				      <&tsens_s6_p1>, <&tsens_s6_p2>,
-				      <&tsens_s7_p1>, <&tsens_s7_p2>,
-				      <&tsens_s8_p1>, <&tsens_s8_p2>,
-				      <&tsens_s9_p1>, <&tsens_s9_p2>,
-				      <&tsens_s10_p1>, <&tsens_s10_p2>,
-				      <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>,
-				      <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>,
-				      <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>,
-				      <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>,
-				      <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>,
-				      <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>,
-				      <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>,
-				      <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>,
-				      <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>,
-				      <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>,
-				      <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>;
-			nvmem-cell-names = "mode",
-					   "base1", "base2",
-					   "use_backup",
-					   "mode_backup",
-					   "base1_backup", "base2_backup",
-					   "s0_p1", "s0_p2",
-					   "s1_p1", "s1_p2",
-					   "s2_p1", "s2_p2",
-					   "s3_p1", "s3_p2",
-					   "s4_p1", "s4_p2",
-					   "s5_p1", "s5_p2",
-					   "s6_p1", "s6_p2",
-					   "s7_p1", "s7_p2",
-					   "s8_p1", "s8_p2",
-					   "s9_p1", "s9_p2",
-					   "s10_p1", "s10_p2",
-					   "s0_p1_backup", "s0_p2_backup",
-					   "s1_p1_backup", "s1_p2_backup",
-					   "s2_p1_backup", "s2_p2_backup",
-					   "s3_p1_backup", "s3_p2_backup",
-					   "s4_p1_backup", "s4_p2_backup",
-					   "s5_p1_backup", "s5_p2_backup",
-					   "s6_p1_backup", "s6_p2_backup",
-					   "s7_p1_backup", "s7_p2_backup",
-					   "s8_p1_backup", "s8_p2_backup",
-					   "s9_p1_backup", "s9_p2_backup",
-					   "s10_p1_backup", "s10_p2_backup";
-			#qcom,sensors = <11>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
-			#thermal-sensor-cells = <1>;
-		};
-		timer@f9020000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xf9020000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@f9021000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9021000 0x1000>,
-				      <0xf9022000 0x1000>;
-			};
-
-			frame@f9023000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9023000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9024000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9024000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9025000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9025000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9026000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9026000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9027000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9027000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9028000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9028000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		saw0: power-controller@f9089000 {
-			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw1: power-controller@f9099000 {
-			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw2: power-controller@f90a9000 {
-			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw3: power-controller@f90b9000 {
-			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
-		acc0: power-manager@f9088000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9088000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc1: power-manager@f9098000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9098000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc2: power-manager@f90a8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90a8000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc3: power-manager@f90b8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90b8000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
-
-		gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-apq8084";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfc400000 0x4000>;
-			clocks = <&xo_board>,
-				 <&sleep_clk>,
-				 <0>, /* ufs */
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>, /* sata */
-				 <0>,
-				 <0>; /* pcie */
-			clock-names = "xo",
-				      "sleep_clk",
-				      "ufs_rx_symbol_0_clk_src",
-				      "ufs_rx_symbol_1_clk_src",
-				      "ufs_tx_symbol_0_clk_src",
-				      "ufs_tx_symbol_1_clk_src",
-				      "sata_asic0_clk",
-				      "sata_rx_clk",
-				      "pcie_pipe";
-		};
-
-		tcsr_mutex: hwlock@fd484000 {
-			compatible = "qcom,apq8084-tcsr-mutex", "qcom,tcsr-mutex";
-			reg = <0xfd484000 0x1000>;
-			#hwlock-cells = <1>;
-		};
-
-		rpm_msg_ram: sram@fc428000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0xfc428000 0x4000>;
-		};
-
-		tlmm: pinctrl@fd510000 {
-			compatible = "qcom,apq8084-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 147>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		blsp2_uart2: serial@f995e000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf995e000 0x1000>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		sdhc_1: mmc@f9824900 {
-			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc", "core";
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "core", "xo";
-			status = "disabled";
-		};
-
-		sdhc_2: mmc@f98a4900 {
-			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc", "core";
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "core", "xo";
-			status = "disabled";
-		};
-
-		spmi_bus: spmi@fc4cf000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg-names = "core", "intr", "cnfg";
-			reg = <0xfc4cf000 0x1000>,
-			      <0xfc4cb000 0x1000>,
-			      <0xfc4ca000 0x1000>;
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm-requests {
-				compatible = "qcom,rpm-apq8084";
-				qcom,smd-channels = "rpm_requests";
-
-				regulators-0 {
-					compatible = "qcom,rpm-pma8084-regulators";
-
-					pma8084_s1: s1 {};
-					pma8084_s2: s2 {};
-					pma8084_s3: s3 {};
-					pma8084_s4: s4 {};
-					pma8084_s5: s5 {};
-					pma8084_s6: s6 {};
-					pma8084_s7: s7 {};
-					pma8084_s8: s8 {};
-					pma8084_s9: s9 {};
-					pma8084_s10: s10 {};
-					pma8084_s11: s11 {};
-					pma8084_s12: s12 {};
-
-					pma8084_l1: l1 {};
-					pma8084_l2: l2 {};
-					pma8084_l3: l3 {};
-					pma8084_l4: l4 {};
-					pma8084_l5: l5 {};
-					pma8084_l6: l6 {};
-					pma8084_l7: l7 {};
-					pma8084_l8: l8 {};
-					pma8084_l9: l9 {};
-					pma8084_l10: l10 {};
-					pma8084_l11: l11 {};
-					pma8084_l12: l12 {};
-					pma8084_l13: l13 {};
-					pma8084_l14: l14 {};
-					pma8084_l15: l15 {};
-					pma8084_l16: l16 {};
-					pma8084_l17: l17 {};
-					pma8084_l18: l18 {};
-					pma8084_l19: l19 {};
-					pma8084_l20: l20 {};
-					pma8084_l21: l21 {};
-					pma8084_l22: l22 {};
-					pma8084_l23: l23 {};
-					pma8084_l24: l24 {};
-					pma8084_l25: l25 {};
-					pma8084_l26: l26 {};
-					pma8084_l27: l27 {};
-
-					pma8084_lvs1: lvs1 {};
-					pma8084_lvs2: lvs2 {};
-					pma8084_lvs3: lvs3 {};
-					pma8084_lvs4: lvs4 {};
-
-					pma8084_5vs1: 5vs1 {};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
deleted file mode 100644
index 1b27edce9d4f3..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/leds/common.h>
-#include "qcom-ipq4018-ap120c-ac.dtsi"
-
-/ {
-	model = "ALFA Network AP120C-AC Bit";
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power {
-			label = "ap120c-ac:green:power";
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		led-wlan {
-			label = "ap120c-ac:green:wlan";
-			function = LED_FUNCTION_WLAN;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-support {
-			label = "ap120c-ac:green:support";
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			panic-indicator;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
deleted file mode 100644
index a707057c887d2..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/leds/common.h>
-#include "qcom-ipq4018-ap120c-ac.dtsi"
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-
-		status: led-status {
-			label = "ap120c-ac:blue:status";
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		led-wlan2g {
-			label = "ap120c-ac:green:wlan2g";
-			function = LED_FUNCTION_WLAN;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		led-wlan5g {
-			label = "ap120c-ac:red:wlan5g";
-			function = LED_FUNCTION_WLAN;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
deleted file mode 100644
index d90b4f4c63afe..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
+++ /dev/null
@@ -1,277 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "ALFA Network AP120C-AC";
-	compatible = "alfa-network,ap120c-ac", "qcom,ipq4018";
-
-	aliases {
-		serial0 = &blsp1_uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		key-reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&tlmm {
-	i2c0_pins: i2c0_pinmux {
-		mux_i2c {
-			function = "blsp_i2c0";
-			pins = "gpio58", "gpio59";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_mdio {
-			pins = "gpio53";
-			function = "mdio";
-			bias-pull-up;
-		};
-
-		mux_mdc {
-			pins = "gpio52";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	serial0_pins: serial0_pinmux {
-		mux_uart {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi0_pins: spi0_pinmux {
-		mux_spi {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio4";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	usb-power-hog {
-		line-name = "USB-power";
-		gpios = <1 GPIO_ACTIVE_HIGH>;
-		gpio-hog;
-		output-high;
-	};
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&prng {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_i2c3 {
-	status = "okay";
-
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-
-	tpm@29 {
-		compatible = "atmel,at97sc3204t";
-		reg = <0x29>;
-	};
-};
-
-&blsp1_spi1 {
-	status = "okay";
-
-	pinctrl-0 = <&spi0_pins>;
-	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "u-boot-env";
-				reg = <0x000e0000 0x00010000>;
-			};
-
-			partition@f0000 {
-				label = "u-boot";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-				compatible = "nvmem-cells";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				precal_art_1000: precal@1000 {
-					reg = <0x1000 0x2f20>;
-				};
-
-				precal_art_5000: precal@5000 {
-					reg = <0x5000 0x2f20>;
-				};
-			};
-
-			partition@180000 {
-				label = "priv_data1";
-				reg = <0x00180000 0x00010000>;
-				read-only;
-			};
-
-			partition@190000 {
-				label = "priv_data2";
-				reg = <0x00190000 0x00010000>;
-				read-only;
-			};
-		};
-	};
-
-	flash@1 {
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <40000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "ubi1";
-				reg = <0x00000000 0x04000000>;
-			};
-
-			partition@4000000 {
-				label = "ubi2";
-				reg = <0x04000000 0x04000000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	status = "okay";
-
-	pinctrl-0 = <&serial0_pins>;
-	pinctrl-names = "default";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&crypto {
-	status = "okay";
-};
-
-&mdio {
-	status = "okay";
-
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-};
-
-&wifi0 {
-	status = "okay";
-	nvmem-cell-names = "pre-calibration";
-	nvmem-cells = <&precal_art_1000>;
-};
-
-&wifi1 {
-	status = "okay";
-	nvmem-cell-names = "pre-calibration";
-	nvmem-cells = <&precal_art_5000>;
-	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb3 {
-	status = "okay";
-
-	dwc3@8a00000 {
-		phys = <&usb3_hs_phy>;
-		phy-names = "usb2-phy";
-	};
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
deleted file mode 100644
index 365fbac417fd1..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
+++ /dev/null
@@ -1,214 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "8devices Jalapeno";
-	compatible = "8dev,jalapeno", "qcom,ipq4018";
-};
-
-&tlmm {
-	mdio_pins: mdio_pinmux {
-		pinmux_1 {
-			pins = "gpio53";
-			function = "mdio";
-		};
-
-		pinmux_2 {
-			pins = "gpio52";
-			function = "mdc";
-		};
-
-		pinconf {
-			pins = "gpio52", "gpio53";
-			bias-pull-up;
-		};
-	};
-
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio59";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&prng {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	status = "okay";
-
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		status = "okay";
-
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "u-boot-env";
-				reg = <0x000e0000 0x00010000>;
-			};
-
-			partition@f0000 {
-				label = "u-boot";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-		};
-	};
-
-	spi-nand@1 {
-		status = "okay";
-
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "ubi1";
-				reg = <0x00000000 0x04000000>;
-			};
-
-			partition@4000000 {
-				label = "ubi2";
-				reg = <0x04000000 0x04000000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	status = "okay";
-
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&crypto {
-	status = "okay";
-};
-
-&mdio {
-	status = "okay";
-
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-};
-
-&wifi0 {
-	status = "okay";
-
-	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
-};
-
-&wifi1 {
-	status = "okay";
-
-	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb3 {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
deleted file mode 100644
index ddaa273f72ca5..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019-ap.dk01.1.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
-	compatible = "qcom,ipq4019-ap-dk01.1-c1", "qcom,ipq4019";
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
deleted file mode 100644
index 0505270cf508c..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ /dev/null
@@ -1,113 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include "qcom-ipq4019.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
-
-	aliases {
-		serial0 = &blsp1_uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		pinctrl@1000000 {
-			serial_pins: serial_pinmux {
-				mux {
-					pins = "gpio60", "gpio61";
-					function = "blsp_uart0";
-					bias-disable;
-				};
-			};
-
-			spi_0_pins: spi_0_pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio55", "gpio56", "gpio57";
-				};
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio54";
-				};
-				pinconf {
-					pins = "gpio55", "gpio56", "gpio57";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				pinconf_cs {
-					pins = "gpio54";
-					drive-strength = <2>;
-					bias-disable;
-					output-high;
-				};
-			};
-		};
-
-		blsp_dma: dma-controller@7884000 {
-			status = "okay";
-		};
-
-		spi@78b5000 {
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-			mx25l25635e@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "mx25l25635e";
-				spi-max-frequency = <24000000>;
-			};
-		};
-
-		serial@78af000 {
-			pinctrl-0 = <&serial_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		cryptobam: dma-controller@8e04000 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		wifi@a000000 {
-			status = "okay";
-		};
-
-		wifi@a800000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
deleted file mode 100644
index 79b0c6318e527..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, The Linux Foundation. All rights reserved.
-
-#include "qcom-ipq4019-ap.dk04.1.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1";
-	compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019";
-
-	soc {
-		dma-controller@7984000 {
-			status = "okay";
-		};
-
-		qpic-nand@79b0000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
deleted file mode 100644
index 7765247125e4b..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
+++ /dev/null
@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, The Linux Foundation. All rights reserved.
-
-#include "qcom-ipq4019-ap.dk04.1.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3";
-	compatible = "qcom,ipq4019-ap-dk04.1-c3", "qcom,ipq4019";
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
deleted file mode 100644
index a63b3778636d4..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, The Linux Foundation. All rights reserved.
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256MB */
-	};
-
-	soc {
-		pinctrl@1000000 {
-			serial_0_pins: serial0-pinmux {
-				pins = "gpio16", "gpio17";
-				function = "blsp_uart0";
-				bias-disable;
-			};
-
-			serial_1_pins: serial1-pinmux {
-				pins = "gpio8", "gpio9",
-					"gpio10", "gpio11";
-				function = "blsp_uart1";
-				bias-disable;
-			};
-
-			spi_0_pins: spi-0-pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio13", "gpio14", "gpio15";
-					bias-disable;
-				};
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio12";
-					bias-disable;
-					output-high;
-				};
-			};
-
-			i2c_0_pins: i2c-0-pinmux {
-				pins = "gpio20", "gpio21";
-				function = "blsp_i2c0";
-				bias-disable;
-			};
-
-			nand_pins: nand-pins {
-				pins = "gpio53", "gpio55", "gpio56",
-					"gpio57", "gpio58", "gpio59",
-					"gpio60", "gpio62", "gpio63",
-					"gpio64", "gpio65", "gpio66",
-					"gpio67", "gpio68", "gpio69";
-				function = "qpic";
-			};
-		};
-
-		serial@78af000 {
-			pinctrl-0 = <&serial_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		dma-controller@7884000 {
-			status = "okay";
-		};
-
-		spi@78b5000 { /* BLSP1 QUP1 */
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "micron,n25q128a11", "jedec,spi-nor";
-				spi-max-frequency = <24000000>;
-			};
-		};
-
-		pci@40000000 {
-			status = "okay";
-			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-		};
-
-		qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
deleted file mode 100644
index ea2987fcbff8d..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, The Linux Foundation. All rights reserved.
-
-#include <dt-bindings/gpio/gpio.h>
-#include "qcom-ipq4019-ap.dk07.1.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
-	compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019";
-
-	soc {
-		pci@40000000 {
-			status = "okay";
-			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-		};
-
-		spi@78b6000 {
-			status = "okay";
-		};
-
-		pinctrl@1000000 {
-			serial_1_pins: serial1-pinmux {
-				pins = "gpio8", "gpio9",
-					"gpio10", "gpio11";
-				function = "blsp_uart1";
-				bias-disable;
-			};
-
-			spi_0_pins: spi-0-pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio13", "gpio14", "gpio15";
-					bias-disable;
-				};
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio12";
-					bias-disable;
-					output-high;
-				};
-			};
-		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		spi@78b5000 {
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "micron,n25q128a11", "jedec,spi-nor";
-				spi-max-frequency = <24000000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
deleted file mode 100644
index bd3553dd2070b..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, The Linux Foundation. All rights reserved.
-
-#include "qcom-ipq4019-ap.dk07.1.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C2";
-	compatible = "qcom,ipq4019-ap-dk07.1-c2", "qcom,ipq4019";
-
-	soc {
-		pinctrl@1000000 {
-			serial_1_pins: serial1-pinmux {
-				pins = "gpio8", "gpio9";
-				function = "blsp_uart1";
-				bias-disable;
-			};
-		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
deleted file mode 100644
index 0107f552f5204..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, The Linux Foundation. All rights reserved.
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512MB */
-	};
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		pinctrl@1000000 {
-			serial_0_pins: serial0-pinmux {
-				pins = "gpio16", "gpio17";
-				function = "blsp_uart0";
-				bias-disable;
-			};
-
-			i2c_0_pins: i2c-0-pinmux {
-				pins = "gpio20", "gpio21";
-				function = "blsp_i2c0";
-				bias-disable;
-			};
-
-			nand_pins: nand-pins {
-				pins = "gpio53", "gpio55", "gpio56",
-				       "gpio57", "gpio58", "gpio59",
-				       "gpio60", "gpio62", "gpio63",
-				       "gpio64", "gpio65", "gpio66",
-				       "gpio67", "gpio68", "gpio69";
-				function = "qpic";
-                        };
-		};
-
-		serial@78af000 {
-			pinctrl-0 = <&serial_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		dma-controller@7884000 {
-			status = "okay";
-		};
-
-		i2c@78b7000 { /* BLSP1 QUP2 */
-			pinctrl-0 = <&i2c_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		dma-controller@7984000 {
-			status = "okay";
-		};
-
-		qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
deleted file mode 100644
index f0ef86fadc9d9..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ /dev/null
@@ -1,698 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	model = "Qualcomm Technologies, Inc. IPQ4019";
-	compatible = "qcom,ipq4019";
-	interrupt-parent = <&intc>;
-
-	reserved-memory {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-
-		smem_region: smem@87e00000 {
-			reg = <0x87e00000 0x080000>;
-			no-map;
-		};
-
-		tz@87e80000 {
-			reg = <0x87e80000 0x180000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		spi0 = &blsp1_spi1;
-		spi1 = &blsp1_spi2;
-		i2c0 = &blsp1_i2c3;
-		i2c1 = &blsp1_i2c4;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-			reg = <0x0>;
-			clocks = <&gcc GCC_APPS_CLK_SRC>;
-			clock-frequency = <0>;
-			clock-latency = <256000>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-			reg = <0x1>;
-			clocks = <&gcc GCC_APPS_CLK_SRC>;
-			clock-frequency = <0>;
-			clock-latency = <256000>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-			qcom,saw = <&saw2>;
-			reg = <0x2>;
-			clocks = <&gcc GCC_APPS_CLK_SRC>;
-			clock-frequency = <0>;
-			clock-latency = <256000>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-			qcom,saw = <&saw3>;
-			reg = <0x3>;
-			clocks = <&gcc GCC_APPS_CLK_SRC>;
-			clock-frequency = <0>;
-			clock-latency = <256000>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-			cache-unified;
-			qcom,saw = <&saw_l2>;
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-48000000 {
-			opp-hz = /bits/ 64 <48000000>;
-			clock-latency-ns = <256000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			clock-latency-ns = <256000>;
-		};
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			clock-latency-ns = <256000>;
-		};
-		opp-716000000 {
-			opp-hz = /bits/ 64 <716000000>;
-			clock-latency-ns = <256000>;
- 		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
-					 IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	clocks {
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-			#clock-cells = <0>;
-		};
-
-		xo: xo {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
-			#clock-cells = <0>;
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-ipq4019", "qcom,scm";
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 2 0xf08>,
-			     <1 3 0xf08>,
-			     <1 4 0xf08>,
-			     <1 1 0xf08>;
-		clock-frequency = <48000000>;
-		always-on;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@b000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x0b000000 0x1000>,
-			<0x0b002000 0x1000>;
-		};
-
-		gcc: clock-controller@1800000 {
-			compatible = "qcom,gcc-ipq4019";
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x1800000 0x60000>;
-			clocks = <&xo>, <&sleep_clk>;
-			clock-names = "xo", "sleep_clk";
-		};
-
-		prng: rng@22000 {
-			compatible = "qcom,prng";
-			reg = <0x22000 0x140>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "core";
-			status = "disabled";
-		};
-
-		tlmm: pinctrl@1000000 {
-			compatible = "qcom,ipq4019-pinctrl";
-			reg = <0x01000000 0x300000>;
-			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 100>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		vqmmc: regulator@1948000 {
-			compatible = "qcom,vqmmc-ipq4019-regulator";
-			reg = <0x01948000 0x4>;
-			regulator-name = "vqmmc";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-			status = "disabled";
-		};
-
-		sdhci: mmc@7824900 {
-			compatible = "qcom,sdhci-msm-v4";
-			reg = <0x7824900 0x11c>, <0x7824000 0x800>;
-			reg-names = "hc", "core";
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			bus-width = <8>;
-			clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_DCD_XO_CLK>;
-			clock-names = "iface", "core", "xo";
-			status = "disabled";
-		};
-
-		blsp_dma: dma-controller@7884000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x07884000 0x23000>;
-			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-			status = "disabled";
-		};
-
-		blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x78b5000 0x600>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x78b6000 0x600>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x78b7000 0x600>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x78b8000 0x600>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		cryptobam: dma-controller@8e04000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x08e04000 0x20000>;
-			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <1>;
-			qcom,controlled-remotely;
-			status = "disabled";
-		};
-
-		crypto: crypto@8e3a000 {
-			compatible = "qcom,crypto-v5.1";
-			reg = <0x08e3a000 0x6000>;
-			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
-				 <&gcc GCC_CRYPTO_AXI_CLK>,
-				 <&gcc GCC_CRYPTO_CLK>;
-			clock-names = "iface", "bus", "core";
-			dmas = <&cryptobam 2>, <&cryptobam 3>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		acc0: power-manager@b088000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
-		};
-
-		acc1: power-manager@b098000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
-		};
-
-		acc2: power-manager@b0a8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
-		};
-
-		acc3: power-manager@b0b8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
-		};
-
-		saw0: regulator@b089000 {
-			compatible = "qcom,saw2";
-			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
-		};
-
-		saw1: regulator@b099000 {
-			compatible = "qcom,saw2";
-			reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
-		};
-
-		saw2: regulator@b0a9000 {
-			compatible = "qcom,saw2";
-			reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
-		};
-
-		saw3: regulator@b0b9000 {
-			compatible = "qcom,saw2";
-			reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
-		};
-
-		saw_l2: regulator@b012000 {
-			compatible = "qcom,saw2";
-			reg = <0xb012000 0x1000>;
-			regulator;
-		};
-
-		blsp1_uart1: serial@78af000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x78af000 0x200>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
-			dma-names = "tx", "rx";
-		};
-
-		blsp1_uart2: serial@78b0000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x78b0000 0x200>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
-			dma-names = "tx", "rx";
-		};
-
-		watchdog: watchdog@b017000 {
-			compatible = "qcom,kpss-wdt-ipq4019", "qcom,kpss-wdt";
-			reg = <0xb017000 0x40>;
-			clocks = <&sleep_clk>;
-			timeout-sec = <10>;
-			status = "disabled";
-		};
-
-		restart@4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0x4ab000 0x4>;
-		};
-
-		pcie0: pci@40000000 {
-			compatible = "qcom,pcie-ipq4019";
-			reg =  <0x40000000 0xf1d
-				0x40000f20 0xa8
-				0x80000 0x2000
-				0x40100000 0x1000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <0>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>,
-				 <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>;
-
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-			clocks = <&gcc GCC_PCIE_AHB_CLK>,
-				 <&gcc GCC_PCIE_AXI_M_CLK>,
-				 <&gcc GCC_PCIE_AXI_S_CLK>;
-			clock-names = "aux",
-				      "master_bus",
-				      "slave_bus";
-
-			resets = <&gcc PCIE_AXI_M_ARES>,
-				 <&gcc PCIE_AXI_S_ARES>,
-				 <&gcc PCIE_PIPE_ARES>,
-				 <&gcc PCIE_AXI_M_VMIDMT_ARES>,
-				 <&gcc PCIE_AXI_S_XPU_ARES>,
-				 <&gcc PCIE_PARF_XPU_ARES>,
-				 <&gcc PCIE_PHY_ARES>,
-				 <&gcc PCIE_AXI_M_STICKY_ARES>,
-				 <&gcc PCIE_PIPE_STICKY_ARES>,
-				 <&gcc PCIE_PWR_ARES>,
-				 <&gcc PCIE_AHB_ARES>,
-				 <&gcc PCIE_PHY_AHB_ARES>;
-			reset-names = "axi_m",
-				      "axi_s",
-				      "pipe",
-				      "axi_m_vmid",
-				      "axi_s_xpu",
-				      "parf",
-				      "phy",
-				      "axi_m_sticky",
-				      "pipe_sticky",
-				      "pwr",
-				      "ahb",
-				      "phy_ahb";
-
-			status = "disabled";
-		};
-
-		qpic_bam: dma-controller@7984000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x7984000 0x1a000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_QPIC_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-			status = "disabled";
-		};
-
-		nand: nand-controller@79b0000 {
-			compatible = "qcom,ipq4019-nand";
-			reg = <0x79b0000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&gcc GCC_QPIC_CLK>,
-				 <&gcc GCC_QPIC_AHB_CLK>;
-			clock-names = "core", "aon";
-
-			dmas = <&qpic_bam 0>,
-			       <&qpic_bam 1>,
-			       <&qpic_bam 2>;
-			dma-names = "tx", "rx", "cmd";
-			status = "disabled";
-
-			nand@0 {
-				reg = <0>;
-
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-				nand-bus-width = <8>;
-			};
-		};
-
-		wifi0: wifi@a000000 {
-			compatible = "qcom,ipq4019-wifi";
-			reg = <0xa000000 0x200000>;
-			resets = <&gcc WIFI0_CPU_INIT_RESET>,
-				 <&gcc WIFI0_RADIO_SRIF_RESET>,
-				 <&gcc WIFI0_RADIO_WARM_RESET>,
-				 <&gcc WIFI0_RADIO_COLD_RESET>,
-				 <&gcc WIFI0_CORE_WARM_RESET>,
-				 <&gcc WIFI0_CORE_COLD_RESET>;
-			reset-names = "wifi_cpu_init", "wifi_radio_srif",
-				      "wifi_radio_warm", "wifi_radio_cold",
-				      "wifi_core_warm", "wifi_core_cold";
-			clocks = <&gcc GCC_WCSS2G_CLK>,
-				 <&gcc GCC_WCSS2G_REF_CLK>,
-				 <&gcc GCC_WCSS2G_RTC_CLK>;
-			clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
-				      "wifi_wcss_rtc";
-			interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
-					   "msi4",  "msi5",  "msi6",  "msi7",
-					   "msi8",  "msi9", "msi10", "msi11",
-					  "msi12", "msi13", "msi14", "msi15",
-					  "legacy";
-			status = "disabled";
-		};
-
-		wifi1: wifi@a800000 {
-			compatible = "qcom,ipq4019-wifi";
-			reg = <0xa800000 0x200000>;
-			resets = <&gcc WIFI1_CPU_INIT_RESET>,
-				 <&gcc WIFI1_RADIO_SRIF_RESET>,
-				 <&gcc WIFI1_RADIO_WARM_RESET>,
-				 <&gcc WIFI1_RADIO_COLD_RESET>,
-				 <&gcc WIFI1_CORE_WARM_RESET>,
-				 <&gcc WIFI1_CORE_COLD_RESET>;
-			reset-names = "wifi_cpu_init", "wifi_radio_srif",
-				      "wifi_radio_warm", "wifi_radio_cold",
-				      "wifi_core_warm", "wifi_core_cold";
-			clocks = <&gcc GCC_WCSS5G_CLK>,
-				 <&gcc GCC_WCSS5G_REF_CLK>,
-				 <&gcc GCC_WCSS5G_RTC_CLK>;
-			clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
-				      "wifi_wcss_rtc";
-			interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
-					   "msi4",  "msi5",  "msi6",  "msi7",
-					   "msi8",  "msi9", "msi10", "msi11",
-					  "msi12", "msi13", "msi14", "msi15",
-					  "legacy";
-			status = "disabled";
-		};
-
-		mdio: mdio@90000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "qcom,ipq4019-mdio";
-			reg = <0x90000 0x64>;
-			status = "disabled";
-
-			ethphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-
-			ethphy2: ethernet-phy@2 {
-				reg = <2>;
-			};
-
-			ethphy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-
-			ethphy4: ethernet-phy@4 {
-				reg = <4>;
-			};
-		};
-
-		usb3_ss_phy: ssphy@9a000 {
-			compatible = "qcom,usb-ss-ipq4019-phy";
-			#phy-cells = <0>;
-			reg = <0x9a000 0x800>;
-			reg-names = "phy_base";
-			resets = <&gcc USB3_UNIPHY_PHY_ARES>;
-			reset-names = "por_rst";
-			status = "disabled";
-		};
-
-		usb3_hs_phy: hsphy@a6000 {
-			compatible = "qcom,usb-hs-ipq4019-phy";
-			#phy-cells = <0>;
-			reg = <0xa6000 0x40>;
-			reg-names = "phy_base";
-			resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
-			reset-names = "por_rst", "srif_rst";
-			status = "disabled";
-		};
-
-		usb3: usb3@8af8800 {
-			compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
-			reg = <0x8af8800 0x100>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&gcc GCC_USB3_MASTER_CLK>,
-				 <&gcc GCC_USB3_SLEEP_CLK>,
-				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
-			clock-names = "core", "sleep", "mock_utmi";
-			ranges;
-			status = "disabled";
-
-			dwc3@8a00000 {
-				compatible = "snps,dwc3";
-				reg = <0x8a00000 0xf8000>;
-				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "host";
-			};
-		};
-
-		usb2_hs_phy: hsphy@a8000 {
-			compatible = "qcom,usb-hs-ipq4019-phy";
-			#phy-cells = <0>;
-			reg = <0xa8000 0x40>;
-			reg-names = "phy_base";
-			resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
-			reset-names = "por_rst", "srif_rst";
-			status = "disabled";
-		};
-
-		usb2: usb2@60f8800 {
-			compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
-			reg = <0x60f8800 0x100>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&gcc GCC_USB2_MASTER_CLK>,
-				 <&gcc GCC_USB2_SLEEP_CLK>,
-				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
-			clock-names = "master", "sleep", "mock_utmi";
-			ranges;
-			status = "disabled";
-
-			dwc3@6000000 {
-				compatible = "snps,dwc3";
-				reg = <0x6000000 0xf8000>;
-				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_hs_phy>;
-				phy-names = "usb2-phy";
-				dr_mode = "host";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
deleted file mode 100644
index 9d06255104c71..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include "qcom-ipq8062.dtsi"
-
-&rpm {
-	smb208_regulators: regulators {
-		compatible = "qcom,rpm-smb208-regulators";
-
-		smb208_s1a: s1a {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1150000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-
-		smb208_s1b: s1b {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1150000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-
-		smb208_s2a: s2a {
-			regulator-min-microvolt = < 800000>;
-			regulator-max-microvolt = <1150000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-
-		smb208_s2b: s2b {
-			regulator-min-microvolt = < 800000>;
-			regulator-max-microvolt = <1150000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8062.dtsi b/arch/arm/boot/dts/qcom-ipq8062.dtsi
deleted file mode 100644
index 5d3ebd3e2e514..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq8062.dtsi
+++ /dev/null
@@ -1,8 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include "qcom-ipq8064-v2.0.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ8062";
-	compatible = "qcom,ipq8062", "qcom,ipq8064";
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
deleted file mode 100644
index a654d3c22c4f5..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
-	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
-	soc {
-		pinmux@800000 {
-			buttons_pins: buttons_pins {
-				mux {
-					pins = "gpio54", "gpio65";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-		};
-
-		gsbi@16300000 {
-			i2c@16380000 {
-				status = "okay";
-				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c4_pins>;
-				pinctrl-names = "default";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
deleted file mode 100644
index 4d509876294be..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ /dev/null
@@ -1,474 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "MikroTik RB3011UiAS-RM";
-	compatible = "mikrotik,rb3011", "qcom,ipq8064";
-
-	aliases {
-		serial0 = &gsbi7_serial;
-		ethernet0 = &gmac0;
-		ethernet1 = &gmac3;
-		mdio-gpio0 = &mdio0;
-		mdio-gpio1 = &mdio1;
-	};
-
-	chosen {
-		bootargs = "loglevel=8 console=ttyMSM0,115200";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@42000000 {
-		reg = <0x42000000 0x3e000000>;
-		device_type = "memory";
-	};
-
-	mdio0: mdio-0 {
-		status = "okay";
-		compatible = "virtual,mdio-gpio";
-		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
-			<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-0 = <&mdio0_pins>;
-		pinctrl-names = "default";
-
-		switch0: switch@10 {
-			compatible = "qca,qca8337";
-
-			dsa,member = <0 0>;
-
-			pinctrl-0 = <&sw0_reset_pin>;
-			pinctrl-names = "default";
-
-			reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-			reg = <0x10>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switch0cpu: port@0 {
-					reg = <0>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "rgmii-id";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "sw1";
-
-					leds {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						led@0 {
-							reg = <0>;
-							color = <LED_COLOR_ID_GREEN>;
-							function = LED_FUNCTION_LAN;
-							default-state = "keep";
-						};
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "sw2";
-
-					leds {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						led@0 {
-							reg = <0>;
-							color = <LED_COLOR_ID_GREEN>;
-							function = LED_FUNCTION_LAN;
-							default-state = "keep";
-						};
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "sw3";
-
-					leds {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						led@0 {
-							reg = <0>;
-							color = <LED_COLOR_ID_GREEN>;
-							function = LED_FUNCTION_LAN;
-							default-state = "keep";
-						};
-					};
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "sw4";
-
-					leds {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						led@0 {
-							reg = <0>;
-							color = <LED_COLOR_ID_GREEN>;
-							function = LED_FUNCTION_LAN;
-							default-state = "keep";
-						};
-					};
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "sw5";
-
-					leds {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						led@0 {
-							reg = <0>;
-							color = <LED_COLOR_ID_GREEN>;
-							function = LED_FUNCTION_LAN;
-							default-state = "keep";
-						};
-					};
-				};
-			};
-		};
-	};
-
-	mdio1: mdio-1 {
-		status = "okay";
-		compatible = "virtual,mdio-gpio";
-		gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
-			<&qcom_pinmux 10 GPIO_ACTIVE_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-0 = <&mdio1_pins>;
-		pinctrl-names = "default";
-
-		switch1: switch@14 {
-			compatible = "qca,qca8337";
-
-			dsa,member = <1 0>;
-
-			pinctrl-0 = <&sw1_reset_pin>;
-			pinctrl-names = "default";
-
-			reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>;
-			reg = <0x10>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switch1cpu: port@0 {
-					reg = <0>;
-					label = "cpu";
-					ethernet = <&gmac3>;
-					phy-mode = "sgmii";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "sw6";
-
-					leds {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						led@0 {
-							reg = <0>;
-							color = <LED_COLOR_ID_GREEN>;
-							function = LED_FUNCTION_LAN;
-							default-state = "keep";
-						};
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "sw7";
-
-					leds {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						led@0 {
-							reg = <0>;
-							color = <LED_COLOR_ID_GREEN>;
-							function = LED_FUNCTION_LAN;
-							default-state = "keep";
-						};
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "sw8";
-
-					leds {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						led@0 {
-							reg = <0>;
-							color = <LED_COLOR_ID_GREEN>;
-							function = LED_FUNCTION_LAN;
-							default-state = "keep";
-						};
-					};
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "sw9";
-
-					leds {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						led@0 {
-							reg = <0>;
-							color = <LED_COLOR_ID_GREEN>;
-							function = LED_FUNCTION_LAN;
-							default-state = "keep";
-						};
-					};
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "sw10";
-
-					leds {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						led@0 {
-							reg = <0>;
-							color = <LED_COLOR_ID_GREEN>;
-							function = LED_FUNCTION_LAN;
-							default-state = "keep";
-						};
-					};
-				};
-			};
-		};
-	};
-
-	soc {
-		gsbi5: gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "okay";
-
-			spi4: spi@1a280000 {
-				status = "okay";
-				spi-max-frequency = <50000000>;
-
-				pinctrl-0 = <&spi_pins>;
-				pinctrl-names = "default";
-
-				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-				norflash: flash@0 {
-					compatible = "jedec,spi-nor";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-
-					partition@0 {
-						label = "RouterBoot";
-						reg = <0x0 0x40000>;
-					};
-				};
-			};
-		};
-
-		gpio-keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&buttons_pins>;
-			pinctrl-names = "default";
-
-			button {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-			led@7 {
-				label = "rb3011:green:user";
-				color = <LED_COLOR_ID_GREEN>;
-				gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&gmac0 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	qcom,id = <0>;
-	phy-handle = <&switch0cpu>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac3 {
-	status = "okay";
-
-	phy-mode = "sgmii";
-	qcom,id = <3>;
-	phy-handle = <&switch1cpu>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gsbi7 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-};
-
-&gsbi7_serial {
-	status = "okay";
-};
-
-&hs_phy_1 {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			boot@0 {
-				label = "RouterBoard NAND 1 Boot";
-				reg = <0x0000000 0x0800000>;
-			};
-
-			main@800000 {
-				label = "RouterBoard NAND 1 Main";
-				reg = <0x0800000 0x7800000>;
-			};
-		};
-	};
-};
-
-&qcom_pinmux {
-	buttons_pins: buttons_pins {
-		mux {
-			pins = "gpio66";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	leds_pins: leds_pins {
-		mux {
-			pins = "gpio33";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio1_pins {
-		mux {
-			pins = "gpio10", "gpio11";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	sw0_reset_pin: sw0_reset_pin {
-		mux {
-			pins = "gpio16";
-			drive-strength = <16>;
-			function = "gpio";
-			bias-disable;
-			input-disable;
-		};
-	};
-
-	sw1_reset_pin: sw1_reset_pin {
-		mux {
-			pins = "gpio17";
-			drive-strength = <16>;
-			function = "gpio";
-			bias-disable;
-			input-disable;
-		};
-	};
-
-	usb1_pwr_en_pins: usb1_pwr_en_pins {
-		mux {
-			pins = "gpio4";
-			function = "gpio";
-			drive-strength = <16>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&ss_phy_1 {
-	status = "okay";
-};
-
-&usb3_1 {
-	pinctrl-0 = <&usb1_pwr_en_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
deleted file mode 100644
index ac9c44f0c1647..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include "qcom-ipq8064.dtsi"
-
-&rpm {
-	smb208_regulators: regulators {
-		compatible = "qcom,rpm-smb208-regulators";
-
-		smb208_s1a: s1a {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1150000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-
-		smb208_s1b: s1b {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1150000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-
-		smb208_s2a: s2a {
-			regulator-min-microvolt = < 800000>;
-			regulator-max-microvolt = <1250000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-
-		smb208_s2b: s2b {
-			regulator-min-microvolt = < 800000>;
-			regulator-max-microvolt = <1250000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
deleted file mode 100644
index 411c8d63c38e1..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
-
-	aliases {
-		serial0 = &gsbi4_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "okay";
-
-			serial@16340000 {
-				status = "okay";
-			};
-		};
-
-		gsbi5: gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "okay";
-
-			spi4: spi@1a280000 {
-				status = "okay";
-				spi-max-frequency = <50000000>;
-
-				pinctrl-0 = <&spi_pins>;
-				pinctrl-names = "default";
-
-				cs-gpios = <&qcom_pinmux 20 0>;
-
-				flash: flash@0 {
-					compatible = "s25fl256s1";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-
-					partition@0 {
-						label = "rootfs";
-						reg = <0x0 0x1000000>;
-					};
-
-					partition@1 {
-						label = "scratch";
-						reg = <0x1000000 0x1000000>;
-					};
-				};
-			};
-		};
-
-		sata-phy@1b400000 {
-			status = "okay";
-		};
-
-		sata@29000000 {
-			ports-implemented = <0x1>;
-			status = "okay";
-		};
-
-		gpio-keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&buttons_pins>;
-			pinctrl-names = "default";
-
-			button-1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-			button-2 {
-				label = "wps";
-				linux,code = <KEY_WPS_BUTTON>;
-				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-			led@7 {
-				label = "led_usb1";
-				gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "usbdev";
-				default-state = "off";
-			};
-
-			led@8 {
-				label = "led_usb3";
-				gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "usbdev";
-				default-state = "off";
-			};
-
-			led@9 {
-				label = "status_led_fail";
-				function = LED_FUNCTION_STATUS;
-				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led@26 {
-				label = "sata_led";
-				gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led@53 {
-				label = "status_led_pass";
-				function = LED_FUNCTION_STATUS;
-				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
deleted file mode 100644
index 0442580b22ded..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include "qcom-ipq8064-v2.0.dtsi"
-
-&rpm {
-	smb208_regulators: regulators {
-		compatible = "qcom,rpm-smb208-regulators";
-
-		smb208_s1a: s1a {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1150000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-
-		smb208_s1b: s1b {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1150000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-
-		smb208_s2a: s2a {
-			regulator-min-microvolt = < 800000>;
-			regulator-max-microvolt = <1250000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-
-		smb208_s2b: s2b {
-			regulator-min-microvolt = < 800000>;
-			regulator-max-microvolt = <1250000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
deleted file mode 100644
index 2f117d576daf3..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include "qcom-ipq8064.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ8064-v2.0";
-
-	aliases {
-		serial0 = &gsbi4_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-};
-
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-
-	serial@16340000 {
-		status = "okay";
-	};
-	/*
-	 * The i2c device on gsbi4 should not be enabled.
-	 * On ipq806x designs gsbi4 i2c is meant for exclusive
-	 * RPM usage. Turning this on in kernel manifests as
-	 * i2c failure for the RPM.
-	 */
-};
-
-&pcie0 {
-	compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie1 {
-	compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie2 {
-	compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&sata {
-	ports-implemented = <0x1>;
-};
-
-&ss_phy_0 {
-	qcom,rx-eq = <2>;
-	qcom,tx-deamp_3_5db = <32>;
-	qcom,mpll = <5>;
-};
-
-&ss_phy_1 {
-	qcom,rx-eq = <2>;
-	qcom,tx-deamp_3_5db = <32>;
-	qcom,mpll = <5>;
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
deleted file mode 100644
index 7581845737a8b..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ /dev/null
@@ -1,1377 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
-#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm IPQ8064";
-	compatible = "qcom,ipq8064";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-		};
-
-		cpu1: cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-			cache-unified;
-		};
-	};
-
-	thermal-zones {
-		sensor0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 0>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 1>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 2>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 3>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor4-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 4>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor5-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor6-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 6>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor7-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 7>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor8-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 8>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor9-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 9>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor10-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 10>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
-					  IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		nss@40000000 {
-			reg = <0x40000000 0x1000000>;
-			no-map;
-		};
-
-		smem: smem@41000000 {
-			compatible = "qcom,smem";
-			reg = <0x41000000 0x200000>;
-			no-map;
-
-			hwlocks = <&sfpb_mutex 3>;
-		};
-	};
-
-	clocks {
-		cxo_board: cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		pxo_board: pxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			#clock-cells = <0>;
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-ipq806x", "qcom,scm";
-		};
-	};
-
-	stmmac_axi_setup: stmmac-axi-config {
-		snps,wr_osr_lmt = <7>;
-		snps,rd_osr_lmt = <7>;
-		snps,blen = <16 0 0 0 0 0 0>;
-	};
-
-	vsdcc_fixed: vsdcc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "SDCC Power";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		rpm: rpm@108000 {
-			compatible = "qcom,rpm-ipq8064";
-			reg = <0x00108000 0x1000>;
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ack", "err", "wakeup";
-
-			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
-			clock-names = "ram";
-
-			rpmcc: clock-controller {
-				compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
-				#clock-cells = <1>;
-			};
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-
-		qfprom: qfprom@700000 {
-			compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
-			reg = <0x00700000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			speedbin_efuse: speedbin@c0 {
-				reg = <0xc0 0x4>;
-			};
-			tsens_calib: calib@400 {
-				reg = <0x400 0xb>;
-			};
-			tsens_calib_backup: calib_backup@410 {
-				reg = <0x410 0xb>;
-			};
-		};
-
-		qcom_pinmux: pinmux@800000 {
-			compatible = "qcom,ipq8064-pinctrl";
-			reg = <0x00800000 0x4000>;
-
-			gpio-controller;
-			gpio-ranges = <&qcom_pinmux 0 0 69>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-
-			pcie0_pins: pcie0_pinmux {
-				mux {
-					pins = "gpio3";
-					function = "pcie1_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			pcie1_pins: pcie1_pinmux {
-				mux {
-					pins = "gpio48";
-					function = "pcie2_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			pcie2_pins: pcie2_pinmux {
-				mux {
-					pins = "gpio63";
-					function = "pcie3_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			i2c4_pins: i2c4-default {
-				pins = "gpio12", "gpio13";
-				function = "gsbi4";
-				drive-strength = <12>;
-				bias-disable;
-			};
-
-			spi_pins: spi_pins {
-				mux {
-					pins = "gpio18", "gpio19", "gpio21";
-					function = "gsbi5";
-					drive-strength = <10>;
-					bias-none;
-				};
-			};
-
-			leds_pins: leds_pins {
-				mux {
-					pins = "gpio7", "gpio8", "gpio9",
-					       "gpio26", "gpio53";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-down;
-					output-low;
-				};
-			};
-
-			buttons_pins: buttons_pins {
-				mux {
-					pins = "gpio54";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			nand_pins: nand_pins {
-				mux {
-					pins = "gpio34", "gpio35", "gpio36",
-					       "gpio37", "gpio38", "gpio39",
-					       "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					function = "nand";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				pullups {
-					pins = "gpio39";
-					function = "nand";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-
-				hold {
-					pins = "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					function = "nand";
-					drive-strength = <10>;
-					bias-bus-hold;
-				};
-			};
-
-			mdio0_pins: mdio0-pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			rgmii2_pins: rgmii2-pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29",
-					       "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59",
-					       "gpio60", "gpio61", "gpio62";
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-ipq8064", "syscon";
-			clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
-			clock-names = "pxo", "cxo", "pll4";
-			reg = <0x00900000 0x4000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-
-			tsens: thermal-sensor@900000 {
-				compatible = "qcom,ipq8064-tsens";
-
-				nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
-				nvmem-cell-names = "calib", "calib_backup";
-				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "uplow";
-
-				#qcom,sensors = <11>;
-				#thermal-sensor-cells = <1>;
-			};
-		};
-
-		sfpb_mutex: hwlock@1200600 {
-			compatible = "qcom,sfpb-mutex";
-			reg = <0x01200600 0x100>;
-
-			#hwlock-cells = <1>;
-		};
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer",
-				     "qcom,msm-timer";
-			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <25000000>;
-			clocks = <&sleep_clk>;
-			clock-names = "sleep";
-			cpu-offset = <0x80000>;
-		};
-
-		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon";
-			reg = <0x02011000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			#clock-cells = <0>;
-		};
-
-		acc0: clock-controller@2088000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu0_aux";
-			#clock-cells = <0>;
-		};
-
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		acc1: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu1_aux";
-			#clock-cells = <0>;
-		};
-
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		nss_common: syscon@03000000 {
-			compatible = "syscon";
-			reg = <0x03000000 0x0000FFFF>;
-		};
-
-		usb3_0: usb3@100f8800 {
-			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x100f8800 0x8000>;
-			clocks = <&gcc USB30_0_MASTER_CLK>;
-			clock-names = "core";
-
-			ranges;
-
-			resets = <&gcc USB30_0_MASTER_RESET>;
-			reset-names = "master";
-
-			status = "disabled";
-
-			dwc3_0: dwc3@10000000 {
-				compatible = "snps,dwc3";
-				reg = <0x10000000 0xcd00>;
-				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hs_phy_0>, <&ss_phy_0>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "host";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		hs_phy_0: phy@100f8800 {
-			compatible = "qcom,ipq806x-usb-phy-hs";
-			reg = <0x100f8800 0x30>;
-			clocks = <&gcc USB30_0_UTMI_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		ss_phy_0: phy@100f8830 {
-			compatible = "qcom,ipq806x-usb-phy-ss";
-			reg = <0x100f8830 0x30>;
-			clocks = <&gcc USB30_0_MASTER_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb3_1: usb3@110f8800 {
-			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x110f8800 0x8000>;
-			clocks = <&gcc USB30_1_MASTER_CLK>;
-			clock-names = "core";
-
-			ranges;
-
-			resets = <&gcc USB30_1_MASTER_RESET>;
-			reset-names = "master";
-
-			status = "disabled";
-
-			dwc3_1: dwc3@11000000 {
-				compatible = "snps,dwc3";
-				reg = <0x11000000 0xcd00>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hs_phy_1>, <&ss_phy_1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "host";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		hs_phy_1: phy@110f8800 {
-			compatible = "qcom,ipq806x-usb-phy-hs";
-			reg = <0x110f8800 0x30>;
-			clocks = <&gcc USB30_1_UTMI_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		ss_phy_1: phy@110f8830 {
-			compatible = "qcom,ipq806x-usb-phy-ss";
-			reg = <0x110f8830 0x30>;
-			clocks = <&gcc USB30_1_MASTER_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		sdcc3bam: dma-controller@12182000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12182000 0x8000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC3_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc1bam: dma-controller@12402000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		amba: amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			sdcc3: mmc@12180000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12180000 0x2000>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <192000000>;
-				sd-uhs-sdr104;
-				sd-uhs-ddr50;
-				vqmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc1: mmc@12400000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12400000 0x2000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		gsbi1: gsbi@12440000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			reg = <0x12440000 0x100>;
-			cell-index = <1>;
-			clocks = <&gcc GSBI1_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			status = "disabled";
-
-			gsbi1_serial: serial@12450000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x12450000 0x100>,
-				      <0x12400000 0x03>;
-				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
-
-				status = "disabled";
-			};
-
-			gsbi1_i2c: i2c@12460000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x12460000 0x1000>;
-				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				status = "disabled";
-			};
-		};
-
-		gsbi2: gsbi@12480000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <2>;
-			reg = <0x12480000 0x100>;
-			clocks = <&gcc GSBI2_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi2_serial: serial@12490000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x12490000 0x1000>,
-				      <0x12480000 0x1000>;
-				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi2_i2c: i2c@124a0000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x124a0000 0x1000>;
-				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		gsbi4: gsbi@16300000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <4>;
-			reg = <0x16300000 0x100>;
-			clocks = <&gcc GSBI4_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi4_serial: serial@16340000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16340000 0x1000>,
-				      <0x16300000 0x1000>;
-				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			i2c@16380000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x16380000 0x1000>;
-				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		gsbi6: gsbi@16500000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			reg = <0x16500000 0x100>;
-			cell-index = <6>;
-			clocks = <&gcc GSBI6_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			status = "disabled";
-
-			gsbi6_i2c: i2c@16580000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x16580000 0x1000>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				status = "disabled";
-			};
-
-			gsbi6_spi: spi@16580000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				reg = <0x16580000 0x1000>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				status = "disabled";
-			};
-		};
-
-		gsbi7: gsbi@16600000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <7>;
-			reg = <0x16600000 0x100>;
-			clocks = <&gcc GSBI7_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			syscon-tcsr = <&tcsr>;
-
-			gsbi7_serial: serial@16640000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16640000 0x1000>,
-				      <0x16600000 0x1000>;
-				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi7_i2c: i2c@16680000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x16680000 0x1000>;
-				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				status = "disabled";
-			};
-		};
-
-		adm_dma: dma-controller@18300000 {
-			compatible = "qcom,adm";
-			reg = <0x18300000 0x100000>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-
-			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-			clock-names = "core", "iface";
-
-			resets = <&gcc ADM0_RESET>,
-				 <&gcc ADM0_PBUS_RESET>,
-				 <&gcc ADM0_C0_RESET>,
-				 <&gcc ADM0_C1_RESET>,
-				 <&gcc ADM0_C2_RESET>;
-			reset-names = "clk", "pbus", "c0", "c1", "c2";
-			qcom,ee = <0>;
-
-			status = "disabled";
-		};
-
-		gsbi5: gsbi@1a200000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x1a200000 0x100>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi5_serial: serial@1a240000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x1a240000 0x1000>,
-				      <0x1a200000 0x1000>;
-				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			i2c@1a280000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x1a280000 0x1000>;
-				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			spi@1a280000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				reg = <0x1a280000 0x1000>;
-				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-ipq8064", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
-		};
-
-		nand: nand-controller@1ac00000 {
-			compatible = "qcom,ipq806x-nand";
-			reg = <0x1ac00000 0x800>;
-
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-
-			clocks = <&gcc EBI2_CLK>,
-				 <&gcc EBI2_AON_CLK>;
-			clock-names = "core", "aon";
-
-			dmas = <&adm_dma 3>;
-			dma-names = "rxtx";
-			qcom,cmd-crci = <15>;
-			qcom,data-crci = <3>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			status = "disabled";
-		};
-
-		sata_phy: sata-phy@1b400000 {
-			compatible = "qcom,ipq806x-sata-phy";
-			reg = <0x1b400000 0x200>;
-
-			clocks = <&gcc SATA_PHY_CFG_CLK>;
-			clock-names = "cfg";
-
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		pcie0: pci@1b500000 {
-			compatible = "qcom,pcie-ipq8064";
-			reg = <0x1b500000 0x1000
-			       0x1b502000 0x80
-			       0x1b600000 0x100
-			       0x0ff00000 0x100000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <0>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000   /* I/O */
-				  0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */
-
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-			clocks = <&gcc PCIE_A_CLK>,
-				 <&gcc PCIE_H_CLK>,
-				 <&gcc PCIE_PHY_CLK>,
-				 <&gcc PCIE_AUX_CLK>,
-				 <&gcc PCIE_ALT_REF_CLK>;
-			clock-names = "core", "iface", "phy", "aux", "ref";
-
-			assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
-			assigned-clock-rates = <100000000>;
-
-			resets = <&gcc PCIE_ACLK_RESET>,
-				 <&gcc PCIE_HCLK_RESET>,
-				 <&gcc PCIE_POR_RESET>,
-				 <&gcc PCIE_PCI_RESET>,
-				 <&gcc PCIE_PHY_RESET>,
-				 <&gcc PCIE_EXT_RESET>;
-			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
-			pinctrl-0 = <&pcie0_pins>;
-			pinctrl-names = "default";
-
-			status = "disabled";
-			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-		};
-
-		pcie1: pci@1b700000 {
-			compatible = "qcom,pcie-ipq8064";
-			reg = <0x1b700000 0x1000
-			       0x1b702000 0x80
-			       0x1b800000 0x100
-			       0x31f00000 0x100000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <1>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000   /* I/O */
-				  0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */
-
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-			clocks = <&gcc PCIE_1_A_CLK>,
-				 <&gcc PCIE_1_H_CLK>,
-				 <&gcc PCIE_1_PHY_CLK>,
-				 <&gcc PCIE_1_AUX_CLK>,
-				 <&gcc PCIE_1_ALT_REF_CLK>;
-			clock-names = "core", "iface", "phy", "aux", "ref";
-
-			assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
-			assigned-clock-rates = <100000000>;
-
-			resets = <&gcc PCIE_1_ACLK_RESET>,
-				 <&gcc PCIE_1_HCLK_RESET>,
-				 <&gcc PCIE_1_POR_RESET>,
-				 <&gcc PCIE_1_PCI_RESET>,
-				 <&gcc PCIE_1_PHY_RESET>,
-				 <&gcc PCIE_1_EXT_RESET>;
-			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
-			pinctrl-0 = <&pcie1_pins>;
-			pinctrl-names = "default";
-
-			status = "disabled";
-			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-		};
-
-		pcie2: pci@1b900000 {
-			compatible = "qcom,pcie-ipq8064";
-			reg = <0x1b900000 0x1000
-			       0x1b902000 0x80
-			       0x1ba00000 0x100
-			       0x35f00000 0x100000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <2>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000   /* I/O */
-				  0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */
-
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-			clocks = <&gcc PCIE_2_A_CLK>,
-				 <&gcc PCIE_2_H_CLK>,
-				 <&gcc PCIE_2_PHY_CLK>,
-				 <&gcc PCIE_2_AUX_CLK>,
-				 <&gcc PCIE_2_ALT_REF_CLK>;
-			clock-names = "core", "iface", "phy", "aux", "ref";
-
-			assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
-			assigned-clock-rates = <100000000>;
-
-			resets = <&gcc PCIE_2_ACLK_RESET>,
-				 <&gcc PCIE_2_HCLK_RESET>,
-				 <&gcc PCIE_2_POR_RESET>,
-				 <&gcc PCIE_2_PCI_RESET>,
-				 <&gcc PCIE_2_PHY_RESET>,
-				 <&gcc PCIE_2_EXT_RESET>;
-			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
-			pinctrl-0 = <&pcie2_pins>;
-			pinctrl-names = "default";
-
-			status = "disabled";
-			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
-		};
-
-		qsgmii_csr: syscon@1bb00000 {
-			compatible = "syscon";
-			reg = <0x1bb00000 0x000001FF>;
-		};
-
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-ipq8064";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		lpass@28100000 {
-			compatible = "qcom,lpass-cpu";
-			status = "disabled";
-			clocks = <&lcc AHBIX_CLK>,
-					<&lcc MI2S_OSR_CLK>,
-					<&lcc MI2S_BIT_CLK>;
-			clock-names = "ahbix-clk",
-					"mi2s-osr-clk",
-					"mi2s-bit-clk";
-			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "lpass-irq-lpaif";
-			reg = <0x28100000 0x10000>;
-			reg-names = "lpass-lpaif";
-		};
-
-		sata: sata@29000000 {
-			compatible = "qcom,ipq806x-ahci", "generic-ahci";
-			reg = <0x29000000 0x180>;
-
-			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&gcc SFAB_SATA_S_H_CLK>,
-				 <&gcc SATA_H_CLK>,
-				 <&gcc SATA_A_CLK>,
-				 <&gcc SATA_RXOOB_CLK>,
-				 <&gcc SATA_PMALIVE_CLK>;
-			clock-names = "slave_face", "iface", "core",
-					"rxoob", "pmalive";
-
-			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
-			assigned-clock-rates = <100000000>, <100000000>;
-
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			status = "disabled";
-		};
-
-		gmac0: ethernet@37000000 {
-			device_type = "network";
-			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
-			reg = <0x37000000 0x200000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			snps,axi-config = <&stmmac_axi_setup>;
-			snps,pbl = <32>;
-			snps,aal;
-
-			qcom,nss-common = <&nss_common>;
-			qcom,qsgmii-csr = <&qsgmii_csr>;
-
-			clocks = <&gcc GMAC_CORE1_CLK>;
-			clock-names = "stmmaceth";
-
-			resets = <&gcc GMAC_CORE1_RESET>,
-				 <&gcc GMAC_AHB_RESET>;
-			reset-names = "stmmaceth", "ahb";
-
-			status = "disabled";
-		};
-
-		gmac1: ethernet@37200000 {
-			device_type = "network";
-			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
-			reg = <0x37200000 0x200000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			snps,axi-config = <&stmmac_axi_setup>;
-			snps,pbl = <32>;
-			snps,aal;
-
-			qcom,nss-common = <&nss_common>;
-			qcom,qsgmii-csr = <&qsgmii_csr>;
-
-			clocks = <&gcc GMAC_CORE2_CLK>;
-			clock-names = "stmmaceth";
-
-			resets = <&gcc GMAC_CORE2_RESET>,
-				 <&gcc GMAC_AHB_RESET>;
-			reset-names = "stmmaceth", "ahb";
-
-			status = "disabled";
-		};
-
-		gmac2: ethernet@37400000 {
-			device_type = "network";
-			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
-			reg = <0x37400000 0x200000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			snps,axi-config = <&stmmac_axi_setup>;
-			snps,pbl = <32>;
-			snps,aal;
-
-			qcom,nss-common = <&nss_common>;
-			qcom,qsgmii-csr = <&qsgmii_csr>;
-
-			clocks = <&gcc GMAC_CORE3_CLK>;
-			clock-names = "stmmaceth";
-
-			resets = <&gcc GMAC_CORE3_RESET>,
-				 <&gcc GMAC_AHB_RESET>;
-			reset-names = "stmmaceth", "ahb";
-
-			status = "disabled";
-		};
-
-		gmac3: ethernet@37600000 {
-			device_type = "network";
-			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
-			reg = <0x37600000 0x200000>;
-			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			snps,axi-config = <&stmmac_axi_setup>;
-			snps,pbl = <32>;
-			snps,aal;
-
-			qcom,nss-common = <&nss_common>;
-			qcom,qsgmii-csr = <&qsgmii_csr>;
-
-			clocks = <&gcc GMAC_CORE4_CLK>;
-			clock-names = "stmmaceth";
-
-			resets = <&gcc GMAC_CORE4_RESET>,
-				 <&gcc GMAC_AHB_RESET>;
-			reset-names = "stmmaceth", "ahb";
-
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
deleted file mode 100644
index 803e6ff99ef8d..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include "qcom-ipq8065.dtsi"
-
-&rpm {
-	smb208_regulators: regulators {
-		compatible = "qcom,rpm-smb208-regulators";
-
-		smb208_s1a: s1a {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1150000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-
-		smb208_s1b: s1b {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1150000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-
-		smb208_s2a: s2a {
-			regulator-min-microvolt = <775000>;
-			regulator-max-microvolt = <1275000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-
-		smb208_s2b: s2b {
-			regulator-min-microvolt = <775000>;
-			regulator-max-microvolt = <1275000>;
-
-			qcom,switch-mode-frequency = <1200000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8065.dtsi b/arch/arm/boot/dts/qcom-ipq8065.dtsi
deleted file mode 100644
index ea49f6cc416d7..0000000000000
--- a/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ /dev/null
@@ -1,8 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include "qcom-ipq8064-v2.0.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ8065";
-	compatible = "qcom,ipq8065", "qcom,ipq8064";
-};
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
deleted file mode 100644
index b269fdca1460c..0000000000000
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
+++ /dev/null
@@ -1,243 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Device Tree Source for mangOH Green Board with WP8548 Module
- *
- * Copyright (C) 2016 BayLibre, SAS.
- * Author : Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <dt-bindings/input/input.h>
-
-#include "qcom-mdm9615-wp8548.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "MangOH Green with WP8548 Module";
-	compatible = "swir,mangoh-green-wp8548", "swir,wp8548", "qcom,mdm9615";
-
-	aliases {
-		spi0 = &gsbi3_spi;
-		serial0 = &gsbi4_serial;
-		serial1 = &gsbi5_serial;
-		i2c0 = &gsbi5_i2c;
-		mmc0 = &sdcc1;
-	};
-
-	chosen {
-		stdout-path = "serial1:115200n8";
-	};
-};
-
-&msmgpio {
-	/* MangOH GPIO Mapping :
-	 * - 2 : GPIOEXP_INT2
-	 * - 7 : IOT1_GPIO2
-	 * - 8 : IOT0_GPIO4
-	 * - 13: IOT0_GPIO3
-	 * - 21: IOT1_GPIO4
-	 * - 22: IOT2_GPIO1
-	 * - 23: IOT2_GPIO2
-	 * - 24: IOT2_GPIO3
-	 * - 25: IOT1_GPIO1
-	 * - 32: IOT1_GPIO3
-	 * - 33: IOT0_GPIO2
-	 * - 42: IOT0_GPIO1 and SD Card Detect
-	 */
-
-	gpioext1_pins: gpioext1-state {
-		gpioext1-pins {
-			pins = "gpio2";
-			function = "gpio";
-			bias-disable;
-		};
-	};
-
-	sdc_cd_pins: sdc-cd-state {
-		sdc-cd-pins {
-			pins = "gpio42";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&gsbi3_spi {
-	spi@0 {
-		compatible = "swir,mangoh-iotport-spi";
-		spi-max-frequency = <24000000>;
-		reg = <0>;
-	};
-};
-
-&gsbi5_i2c {
-	mux@71 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c_iot0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c_iot1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c_iot2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			usbhub: hub@8 {
-				compatible = "smsc,usb3503a";
-				reg = <0x8>;
-				connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>;
-				intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>;
-				initial-mode = <1>;
-			};
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			gpioext0: pinctrl@3e {
-				/* GPIO Expander 0 Mapping :
-				 * - 0: ARDUINO_RESET_Level shift
-				 * - 1: BattChrgr_PG_N
-				 * - 2: BattGauge_GPIO
-				 * - 3: LED_ON (out active high)
-				 * - 4: ATmega_reset_GPIO
-				 * - 5: X
-				 * - 6: PCM_ANALOG_SELECT (out active high)
-				 * - 7: X
-				 * - 8: Board_rev_res1 (in)
-				 * - 9: Board_rev_res2 (in)
-				 * - 10: UART_EXP1_ENn (out active low / pull-down)
-				 * - 11: UART_EXP1_IN (out pull-down)
-				 * - 12: UART_EXP2_IN (out pull-down)
-				 * - 13: SDIO_SEL (out pull-down)
-				 * - 14: SPI_EXP1_ENn (out active low / pull-down)
-				 * - 15: SPI_EXP1_IN (out pull-down)
-				 */
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "semtech,sx1509q";
-				reg = <0x3e>;
-				interrupt-parent = <&gpioext1>;
-				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-
-				semtech,probe-reset;
-
-				gpio-controller;
-				interrupt-controller;
-			};
-		};
-
-		i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			gpioext1: pinctrl@3f {
-				/* GPIO Expander 1 Mapping :
-				 * - 0: GPIOEXP_INT1
-				 * - 1: Battery detect
-				 * - 2: GPIO_SCF3_RESET
-				 * - 3: LED_CARD_DETECT_IOT0 (in)
-				 * - 4: LED_CARD_DETECT_IOT1 (in)
-				 * - 5: LED_CARD_DETECT_IOT2 (in)
-				 * - 6: UIM2_PWM_SELECT
-				 * - 7: UIM2_M2_S_SELECT
-				 * - 8: TP900
-				 * - 9: SENSOR_INT1 (in)
-				 * - 10: SENSOR_INT2 (in)
-				 * - 11: CARD_DETECT_IOT0 (in pull-up)
-				 * - 12: CARD_DETECT_IOT2 (in pull-up)
-				 * - 13: CARD_DETECT_IOT1 (in pull-up)
-				 * - 14: GPIOEXP_INT3 (in active low / pull-up)
-				 * - 15: BattChrgr_INT_N
-				 */
-				pinctrl-0 = <&gpioext1_pins>;
-				pinctrl-names = "default";
-
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "semtech,sx1509q";
-				reg = <0x3f>;
-				interrupt-parent = <&msmgpio>;
-				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-
-				semtech,probe-reset;
-
-				gpio-controller;
-				interrupt-controller;
-			};
-		};
-
-		i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			gpioext2: pinctrl@70 {
-				/* GPIO Expander 2 Mapping :
-				 * - 0: USB_HUB_INTn
-				 * - 1: HUB_CONNECT
-				 * - 2: GPIO_IOT2_RESET (out active low / pull-up)
-				 * - 3: GPIO_IOT1_RESET (out active low / pull-up)
-				 * - 4: GPIO_IOT0_RESET (out active low / pull-up)
-				 * - 5: TP901
-				 * - 6: TP902
-				 * - 7: TP903
-				 * - 8: UART_EXP2_ENn (out active low / pull-down)
-				 * - 9: PCM_EXP1_ENn (out active low)
-				 * - 10: PCM_EXP1_SEL (out)
-				 * - 11: ARD_FTDI
-				 * - 12: TP904
-				 * - 13: TP905
-				 * - 14: TP906
-				 * - 15: RS232_Enable (out active high / pull-up)
-				 */
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "semtech,sx1509q";
-				reg = <0x70>;
-				interrupt-parent = <&gpioext1>;
-				interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
-
-				semtech,probe-reset;
-
-				gpio-controller;
-				interrupt-controller;
-			};
-		};
-
-		i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&sdcc1 {
-	pinctrl-0 = <&sdc_cd_pins>;
-	pinctrl-names = "default";
-	disable-wp;
-	cd-gpios = <&msmgpio 42 GPIO_ACTIVE_LOW>; /* Active low CD */
-};
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
deleted file mode 100644
index 92c8003dac252..0000000000000
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Device Tree Source for Sierra Wireless WP8548 Module
- *
- * Copyright (C) 2016 BayLibre, SAS.
- * Author : Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include "qcom-mdm9615.dtsi"
-
-/ {
-	model = "Sierra Wireless WP8548 Module";
-	compatible = "swir,wp8548", "qcom,mdm9615";
-
-	memory@48000000 {
-		device_type = "memory";
-		reg = <0x48000000 0x7F00000>;
-	};
-};
-
-&msmgpio {
-	pinctrl-0 = <&reset_out_pins>;
-	pinctrl-names = "default";
-
-	gsbi3_pins: gsbi3-state {
-		gsbi3-pins {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "gsbi3";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	gsbi4_pins: gsbi4-state {
-		gsbi4-pins {
-			pins = "gpio12", "gpio13", "gpio14", "gpio15";
-			function = "gsbi4";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	gsbi5_i2c_pins: gsbi5-i2c-state {
-		sda-pins {
-			pins = "gpio16";
-			function = "gsbi5_i2c";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		scl-pins {
-			pins = "gpio17";
-			function = "gsbi5_i2c";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	gsbi5_uart_pins: gsbi5-uart-state {
-		gsbi5-uart-pins {
-			pins = "gpio18", "gpio19";
-			function = "gsbi5_uart";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	reset_out_pins: reset-out-state {
-		reset-out-pins {
-			pins = "gpio66";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-			output-high;
-		};
-	};
-};
-
-&pmicgpio {
-	usb_vbus_5v_pins: usb-vbus-5v-state {
-		pins = "gpio4";
-		function = "normal";
-		output-high;
-		bias-disable;
-		qcom,drive-strength = <1>;
-		power-source = <2>;
-	};
-};
-
-&gsbi3 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_SPI>;
-};
-
-&gsbi3_spi {
-	status = "okay";
-	pinctrl-0 = <&gsbi3_pins>;
-	pinctrl-names = "default";
-	assigned-clocks = <&gcc GSBI3_QUP_CLK>;
-	assigned-clock-rates = <24000000>;
-};
-
-&gsbi4 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_UART_W_FC>;
-};
-
-&gsbi4_serial {
-	status = "okay";
-	pinctrl-0 = <&gsbi4_pins>;
-	pinctrl-names = "default";
-};
-
-&gsbi5 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-};
-
-&gsbi5_i2c {
-	status = "okay";
-	clock-frequency = <200000>;
-	pinctrl-0 = <&gsbi5_i2c_pins>;
-	pinctrl-names = "default";
-};
-
-&gsbi5_serial {
-	status = "okay";
-	pinctrl-0 = <&gsbi5_uart_pins>;
-	pinctrl-names = "default";
-};
-
-&sdcc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
deleted file mode 100644
index b40c52ddf9b44..0000000000000
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ /dev/null
@@ -1,507 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Device Tree Source for Qualcomm MDM9615 SoC
- *
- * Copyright (C) 2016 BayLibre, SAS.
- * Author : Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
-#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm MDM9615";
-	compatible = "qcom,mdm9615";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a5";
-			reg = <0>;
-			device_type = "cpu";
-			next-level-cache = <&L2>;
-		};
-	};
-
-	cpu-pmu {
-		compatible = "arm,cortex-a5-pmu";
-		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	clocks {
-		cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-	};
-
-	regulators {
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		L2: cache-controller@2040000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x02040000 0x1000>;
-			arm,data-latency = <2 2 0>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-wdt-mdm9615", "qcom,kpss-timer",
-				     "qcom,msm-timer";
-			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>;
-			cpu-offset = <0x80000>;
-		};
-
-		msmgpio: pinctrl@800000 {
-			compatible = "qcom,mdm9615-pinctrl";
-			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 88>;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x800000 0x4000>;
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-mdm9615";
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x900000 0x4000>;
-		};
-
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-mdm9615";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon";
-			reg = <0x02011000 0x1000>;
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
-			assigned-clocks = <&gcc PRNG_CLK>;
-			assigned-clock-rates = <32000000>;
-		};
-
-		gsbi2: gsbi@16100000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <2>;
-			reg = <0x16100000 0x100>;
-			clocks = <&gcc GSBI2_H_CLK>;
-			clock-names = "iface";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi2_i2c: i2c@16180000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x16180000 0x1000>;
-				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		gsbi3: gsbi@16200000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <3>;
-			reg = <0x16200000 0x100>;
-			clocks = <&gcc GSBI3_H_CLK>;
-			clock-names = "iface";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi3_spi: spi@16280000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x16280000 0x1000>;
-				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		gsbi4: gsbi@16300000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <4>;
-			reg = <0x16300000 0x100>;
-			clocks = <&gcc GSBI4_H_CLK>;
-			clock-names = "iface";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi4_serial: serial@16340000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16340000 0x1000>,
-				      <0x16300000 0x1000>;
-				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		gsbi5: gsbi@16400000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x16400000 0x100>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi5_i2c: i2c@16480000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x16480000 0x1000>;
-				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-
-				/* QUP clock is not initialized, set rate */
-				assigned-clocks = <&gcc GSBI5_QUP_CLK>;
-				assigned-clock-rates = <24000000>;
-
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi5_serial: serial@16440000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16440000 0x1000>,
-				      <0x16400000 0x1000>;
-				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8018", "qcom,pm8921";
-				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pmicmpp: mpps@50 {
-					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pmicmpp 0 0 6>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pmicgpio: gpio@150 {
-					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pmicgpio 0 0 6>;
-					#gpio-cells = <2>;
-				};
-			};
-		};
-
-		sdcc1bam: dma-controller@12182000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12182000 0x8000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc2bam: dma-controller@12142000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12142000 0x8000>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC2_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc1: mmc@12180000 {
-			status = "disabled";
-			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00051180>;
-			reg = <0x12180000 0x2000>;
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-			clock-names = "mclk", "apb_pclk";
-			bus-width = <8>;
-			max-frequency = <48000000>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			vmmc-supply = <&vsdcc_fixed>;
-			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-			dma-names = "tx", "rx";
-			assigned-clocks = <&gcc SDC1_CLK>;
-			assigned-clock-rates = <400000>;
-		};
-
-		sdcc2: mmc@12140000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00051180>;
-			status = "disabled";
-			reg = <0x12140000 0x2000>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
-			clock-names = "mclk", "apb_pclk";
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <48000000>;
-			no-1-8-v;
-			vmmc-supply = <&vsdcc_fixed>;
-			dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
-			dma-names = "tx", "rx";
-			assigned-clocks = <&gcc SDC2_CLK>;
-			assigned-clock-rates = <400000>;
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-mdm9615", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-
-		rpm: rpm@108000 {
-			compatible = "qcom,rpm-mdm9615";
-			reg = <0x108000 0x1000>;
-
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8018-regulators";
-
-				vin_lvs1-supply = <&pm8018_s3>;
-
-				vdd_l7-supply = <&pm8018_s4>;
-				vdd_l8-supply = <&pm8018_s3>;
-				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
-
-				/* Buck SMPS */
-				pm8018_s1: s1 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s2: s2 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s3: s3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s4: s4 {
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s5: s5 {
-					regulator-always-on;
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* PMOS LDO */
-				pm8018_l2: l2 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l3: l3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l4: l4 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				pm8018_l5: l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l6: l6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l7: l7 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8018_l8: l8 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8018_l9: l9 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				pm8018_l10: l10 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l11: l11 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l12: l12 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l13: l13 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8018_l14: l14 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				pm8018_lvs1: lvs1 {
-					bias-pull-down;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
deleted file mode 100644
index 288cacd5d1fab..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2020, The Linux Foundation. All rights reserved.
- */
-
-#include "qcom-msm8226.dtsi"
-
-/ {
-	model = "Samsung Galaxy S III Neo";
-	compatible = "samsung,s3ve3g", "qcom,msm8226";
-	chassis-type = "handset";
-
-	aliases {
-		serial0 = &blsp1_uart3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_uart3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
deleted file mode 100644
index 42acb9ddb8ccb..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ /dev/null
@@ -1,652 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2020, The Linux Foundation. All rights reserved.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8974.h>
-#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include <dt-bindings/reset/qcom,gcc-msm8974.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	chosen { };
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	clocks {
-		xo_board: xo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-msm8226", "qcom,scm";
-			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-		};
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		smem_region: smem@3000000 {
-			reg = <0x3000000 0x100000>;
-			no-map;
-		};
-
-		adsp_region: adsp@dc00000 {
-			reg = <0x0dc00000 0x1900000>;
-			no-map;
-		};
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8226";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8226", "qcom,rpmcc";
-					#clock-cells = <1>;
-					clocks = <&xo_board>;
-					clock-names = "xo";
-				};
-
-				rpmpd: power-controller {
-					compatible = "qcom,msm8226-rpmpd";
-					#power-domain-cells = <1>;
-					operating-points-v2 = <&rpmpd_opp_table>;
-
-					rpmpd_opp_table: opp-table {
-						compatible = "operating-points-v2";
-
-						rpmpd_opp_ret: opp1 {
-							opp-level = <1>;
-						};
-						rpmpd_opp_svs_krait: opp2 {
-							opp-level = <2>;
-						};
-						rpmpd_opp_svs_soc: opp3 {
-							opp-level = <3>;
-						};
-						rpmpd_opp_nom: opp4 {
-							opp-level = <4>;
-						};
-						rpmpd_opp_turbo: opp5 {
-							opp-level = <5>;
-						};
-						rpmpd_opp_super_turbo: opp6 {
-							opp-level = <6>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	smem {
-		compatible = "qcom,smem";
-
-		memory-region = <&smem_region>;
-		qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
-	smp2p-adsp {
-		compatible = "qcom,smp2p";
-		qcom,smem = <443>, <429>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
-
-		qcom,ipc = <&apcs 8 10>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <2>;
-
-		adsp_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		adsp_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		intc: interrupt-controller@f9000000 {
-			compatible = "qcom,msm-qgic2";
-			reg = <0xf9000000 0x1000>,
-			      <0xf9002000 0x1000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-		};
-
-		apcs: syscon@f9011000 {
-			compatible = "syscon";
-			reg = <0xf9011000 0x1000>;
-		};
-
-		sdhc_1: mmc@f9824900 {
-			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc", "core";
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "core", "xo";
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc1_default_state>;
-			status = "disabled";
-		};
-
-		sdhc_2: mmc@f98a4900 {
-			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc", "core";
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "core", "xo";
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc2_default_state>;
-			status = "disabled";
-		};
-
-		sdhc_3: mmc@f9864900 {
-			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
-			reg-names = "hc", "core";
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
-				 <&gcc GCC_SDCC3_APPS_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "core", "xo";
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc3_default_state>;
-			status = "disabled";
-		};
-
-		blsp1_uart1: serial@f991d000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf991d000 0x1000>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		blsp1_uart3: serial@f991f000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf991f000 0x1000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		blsp1_uart4: serial@f9920000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf9920000 0x1000>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		blsp1_i2c1: i2c@f9923000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9923000 0x1000>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c1_pins>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c2: i2c@f9924000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9924000 0x1000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c2_pins>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c3: i2c@f9925000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9925000 0x1000>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c3_pins>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c4: i2c@f9926000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9926000 0x1000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c4_pins>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c5: i2c@f9927000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9927000 0x1000>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c5_pins>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		cci: cci@fda0c000 {
-			compatible = "qcom,msm8226-cci";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xfda0c000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
-				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
-				 <&mmcc CAMSS_CCI_CCI_CLK>;
-			clock-names = "camss_top_ahb",
-				      "cci_ahb",
-				      "cci";
-
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&cci_default>;
-			pinctrl-1 = <&cci_sleep>;
-
-			status = "disabled";
-
-			cci_i2c0: i2c-bus@0 {
-				reg = <0>;
-				clock-frequency = <400000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		usb: usb@f9a55000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0xf9a55000 0x200>,
-			      <0xf9a55200 0x200>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
-				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			clock-names = "iface", "core";
-			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			assigned-clock-rates = <75000000>;
-			resets = <&gcc GCC_USB_HS_BCR>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			dr_mode = "otg";
-			hnp-disable;
-			srp-disable;
-			adp-disable;
-			ahb-burst-config = <0>;
-			phy-names = "usb-phy";
-			phys = <&usb_hs_phy>;
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs_phy: phy {
-					compatible = "qcom,usb-hs-phy-msm8226",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
-					reset-names = "phy", "por";
-					qcom,init-seq = /bits/ 8 <0x0 0x44
-						0x1 0x68 0x2 0x24 0x3 0x13>;
-				};
-			};
-		};
-
-		gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-msm8226";
-			reg = <0xfc400000 0x4000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&sleep_clk>;
-			clock-names = "xo",
-				      "sleep_clk";
-		};
-
-		mmcc: clock-controller@fd8c0000 {
-			compatible = "qcom,mmcc-msm8226";
-			reg = <0xfd8c0000 0x6000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
-
-		tlmm: pinctrl@fd510000 {
-			compatible = "qcom,msm8226-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 117>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-
-			blsp1_i2c1_pins: blsp1-i2c1-state {
-				pins = "gpio2", "gpio3";
-				function = "blsp_i2c1";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c2_pins: blsp1-i2c2-state {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c3_pins: blsp1-i2c3-state {
-				pins = "gpio10", "gpio11";
-				function = "blsp_i2c3";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c4_pins: blsp1-i2c4-state {
-				pins = "gpio14", "gpio15";
-				function = "blsp_i2c4";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c5_pins: blsp1-i2c5-state {
-				pins = "gpio18", "gpio19";
-				function = "blsp_i2c5";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			cci_default: cci-default-state {
-				pins = "gpio29", "gpio30";
-				function = "cci_i2c0";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			cci_sleep: cci-sleep-state {
-				pins = "gpio29", "gpio30";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			sdhc1_default_state: sdhc1-default-state {
-				clk-pins {
-					pins = "sdc1_clk";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				cmd-data-pins {
-					pins = "sdc1_cmd", "sdc1_data";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
-
-			sdhc2_default_state: sdhc2-default-state {
-				clk-pins {
-					pins = "sdc2_clk";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				cmd-data-pins {
-					pins = "sdc2_cmd", "sdc2_data";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
-
-			sdhc3_default_state: sdhc3-default-state {
-				clk-pins {
-					pins = "gpio44";
-					function = "sdc3";
-					drive-strength = <8>;
-					bias-disable;
-				};
-
-				cmd-pins {
-					pins = "gpio43";
-					function = "sdc3";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-
-				data-pins {
-					pins = "gpio39", "gpio40", "gpio41", "gpio42";
-					function = "sdc3";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-		};
-
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
-
-		spmi_bus: spmi@fc4cf000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg-names = "core", "intr", "cnfg";
-			reg = <0xfc4cf000 0x1000>,
-			      <0xfc4cb000 0x1000>,
-			      <0xfc4ca000 0x1000>;
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
-		rng@f9bff000 {
-			compatible = "qcom,prng";
-			reg = <0xf9bff000 0x200>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "core";
-		};
-
-		timer@f9020000 {
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xf9020000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			frame@f9021000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9021000 0x1000>,
-				      <0xf9022000 0x1000>;
-			};
-
-			frame@f9023000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9023000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9024000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9024000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9025000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9025000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9026000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9026000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9027000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9027000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9028000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9028000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		rpm_msg_ram: sram@fc428000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0xfc428000 0x4000>;
-		};
-
-		tcsr_mutex: hwlock@fd484000 {
-			compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
-			reg = <0xfd484000 0x1000>;
-			#hwlock-cells = <1>;
-		};
-
-		adsp: remoteproc@fe200000 {
-			compatible = "qcom,msm8226-adsp-pil";
-			reg = <0xfe200000 0x100>;
-
-			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-			power-domains = <&rpmpd MSM8226_VDDCX>;
-			power-domain-names = "cx";
-
-			clocks = <&xo_board>;
-			clock-names = "xo";
-
-			memory-region = <&adsp_region>;
-
-			qcom,smem-states = <&adsp_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			smd-edge {
-				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,ipc = <&apcs 8 8>;
-				qcom,smd-edge = <1>;
-
-				label = "lpass";
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 2
-				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 3
-				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 4
-				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 1
-				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
deleted file mode 100644
index be18f1be29a17..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/input/input.h>
-
-#include "qcom-msm8660.dtsi"
-
-/ {
-	model = "Qualcomm MSM8660 SURF";
-	compatible = "qcom,msm8660-surf", "qcom,msm8660";
-
-	aliases {
-		serial0 = &gsbi12_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/* Temporary fixed regulator */
-	vsdcc_fixed: vsdcc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "SDCC Power";
-		regulator-min-microvolt = <2700000>;
-		regulator-max-microvolt = <2700000>;
-		regulator-always-on;
-	};
-};
-
-&gsbi12 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-};
-
-&gsbi12_serial {
-	status = "okay";
-};
-
-&pm8058 {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_FN_F1)
-			MATRIX_KEY(0, 1, KEY_UP)
-			MATRIX_KEY(0, 2, KEY_LEFT)
-			MATRIX_KEY(0, 3, KEY_VOLUMEUP)
-			MATRIX_KEY(1, 0, KEY_FN_F2)
-			MATRIX_KEY(1, 1, KEY_RIGHT)
-			MATRIX_KEY(1, 2, KEY_DOWN)
-			MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
-			MATRIX_KEY(2, 3, KEY_ENTER)
-			MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(4, 1, KEY_UP)
-			MATRIX_KEY(4, 2, KEY_LEFT)
-			MATRIX_KEY(4, 3, KEY_HOME)
-			MATRIX_KEY(4, 4, KEY_FN_F3)
-			MATRIX_KEY(5, 0, KEY_CAMERA)
-			MATRIX_KEY(5, 1, KEY_RIGHT)
-			MATRIX_KEY(5, 2, KEY_DOWN)
-			MATRIX_KEY(5, 3, KEY_BACK)
-			MATRIX_KEY(5, 4, KEY_MENU)
-			>;
-		keypad,num-rows = <6>;
-		keypad,num-columns = <5>;
-	};
-};
-
-/* eMMC */
-&sdcc1 {
-	vmmc-supply = <&vsdcc_fixed>;
-	status = "okay";
-};
-
-/* External micro SD card */
-&sdcc3 {
-	vmmc-supply = <&vsdcc_fixed>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
deleted file mode 100644
index 78023ed2fdf71..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ /dev/null
@@ -1,651 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8660.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm MSM8660";
-	compatible = "qcom,msm8660";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "qcom,scorpion";
-			enable-method = "qcom,gcc-msm8660";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,scorpion";
-			enable-method = "qcom,gcc-msm8660";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-			cache-unified;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	cpu-pmu {
-		compatible = "qcom,scorpion-mp-pmu";
-		interrupts = <1 9 0x304>;
-	};
-
-	clocks {
-		cxo_board: cxo-board-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-			clock-output-names = "cxo_board";
-		};
-
-		pxo_board: pxo-board-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-			clock-output-names = "pxo_board";
-		};
-
-		sleep-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "sleep_clk";
-		};
-	};
-
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@2080000 {
-			compatible = "qcom,msm-8660-qgic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = < 0x02080000 0x1000 >,
-			      < 0x02081000 0x1000 >;
-		};
-
-		timer@2000000 {
-			compatible = "qcom,scss-timer", "qcom,msm-timer";
-			interrupts = <1 0 0x301>,
-				     <1 1 0x301>,
-				     <1 2 0x301>;
-			reg = <0x02000000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
-			cpu-offset = <0x40000>;
-		};
-
-		tlmm: pinctrl@800000 {
-			compatible = "qcom,msm8660-pinctrl";
-			reg = <0x800000 0x4000>;
-
-			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 173>;
-			#gpio-cells = <2>;
-			interrupts = <0 16 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-msm8660";
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x900000 0x4000>;
-			clocks = <&pxo_board>, <&cxo_board>;
-			clock-names = "pxo", "cxo";
-		};
-
-		gsbi1: gsbi@16000000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <12>;
-			reg = <0x16000000 0x100>;
-			clocks = <&gcc GSBI1_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			status = "disabled";
-
-			gsbi1_spi: spi@16080000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				reg = <0x16080000 0x1000>;
-				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi3: gsbi@16200000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <12>;
-			reg = <0x16200000 0x100>;
-			clocks = <&gcc GSBI3_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-			status = "disabled";
-
-			gsbi3_i2c: i2c@16280000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x16280000 0x1000>;
-				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi6: gsbi@16500000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <12>;
-			reg = <0x16500000 0x100>;
-			clocks = <&gcc GSBI6_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi6_serial: serial@16540000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16540000 0x1000>,
-				      <0x16500000 0x1000>;
-				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi6_i2c: i2c@16580000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x16580000 0x1000>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi7: gsbi@16600000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <12>;
-			reg = <0x16600000 0x100>;
-			clocks = <&gcc GSBI7_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi7_serial: serial@16640000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16640000 0x1000>,
-				      <0x16600000 0x1000>;
-				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi7_i2c: i2c@16680000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x16680000 0x1000>;
-				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi8: gsbi@19800000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <12>;
-			reg = <0x19800000 0x100>;
-			clocks = <&gcc GSBI8_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-			status = "disabled";
-
-			gsbi8_i2c: i2c@19880000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x19880000 0x1000>;
-				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi12: gsbi@19c00000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <12>;
-			reg = <0x19c00000 0x100>;
-			clocks = <&gcc GSBI12_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi12_serial: serial@19c40000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x19c40000 0x1000>,
-				      <0x19c00000 0x1000>;
-				interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi12_i2c: i2c@19c80000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x19c80000 0x1000>;
-				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		ebi2: external-bus@1a100000 {
-			compatible = "qcom,msm8660-ebi2";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0x0 0x1a800000 0x00800000>,
-				 <1 0x0 0x1b000000 0x00800000>,
-				 <2 0x0 0x1b800000 0x00800000>,
-				 <3 0x0 0x1d000000 0x08000000>,
-				 <4 0x0 0x1c800000 0x00800000>,
-				 <5 0x0 0x1c000000 0x00800000>;
-			reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
-			reg-names = "ebi2", "xmem";
-			clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
-			clock-names = "ebi2x", "ebi2";
-			status = "disabled";
-		};
-
-		ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-
-			pm8058: pmic {
-				compatible = "qcom,pm8058";
-				interrupt-parent = <&tlmm>;
-				interrupts = <88 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8058_gpio: gpio@150 {
-					compatible = "qcom,pm8058-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8058_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8058_mpps: mpps@50 {
-					compatible = "qcom,pm8058-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8058_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8058-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pm8058_keypad: keypad@148 {
-					compatible = "qcom,pm8058-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <74 1>, <75 1>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8058-adc";
-					reg = <0x197>;
-					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					ichg: adc-channel@3 {
-						reg = <0x00 0x03>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					ref_325mv: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-
-				rtc@1e8 {
-					compatible = "qcom,pm8058-rtc";
-					reg = <0x1e8>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <39 1>;
-					allow-set-time;
-				};
-
-				vibrator@4a {
-					compatible = "qcom,pm8058-vib";
-					reg = <0x4a>;
-				};
-
-				pm8058_led48: led@48 {
-					compatible = "qcom,pm8058-keypad-led";
-					reg = <0x48>;
-					status = "disabled";
-				};
-
-				pm8058_led131: led@131 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x131>;
-					status = "disabled";
-				};
-
-				pm8058_led132: led@132 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x132>;
-					status = "disabled";
-				};
-
-				pm8058_led133: led@133 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x133>;
-					status = "disabled";
-				};
-
-			};
-		};
-
-		l2cc: clock-controller@2082000 {
-			compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon";
-			reg = <0x02082000 0x1000>;
-		};
-
-		rpm: rpm@104000 {
-			compatible = "qcom,rpm-msm8660";
-			reg = <0x00104000 0x1000>;
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ack", "err", "wakeup";
-			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
-			clock-names = "ram";
-
-			rpmcc: clock-controller {
-				compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
-				#clock-cells = <1>;
-				clocks = <&pxo_board>;
-				clock-names = "pxo";
-			};
-
-			regulators-0 {
-				compatible = "qcom,rpm-pm8901-regulators";
-
-				pm8901_l0: l0 {};
-				pm8901_l1: l1 {};
-				pm8901_l2: l2 {};
-				pm8901_l3: l3 {};
-				pm8901_l4: l4 {};
-				pm8901_l5: l5 {};
-				pm8901_l6: l6 {};
-
-				/* S0 and S1 Handled as SAW regulators by SPM */
-				pm8901_s2: s2 {};
-				pm8901_s3: s3 {};
-				pm8901_s4: s4 {};
-
-				pm8901_lvs0: lvs0 {};
-				pm8901_lvs1: lvs1 {};
-				pm8901_lvs2: lvs2 {};
-				pm8901_lvs3: lvs3 {};
-
-				pm8901_mvs: mvs {};
-			};
-
-			regulators-1 {
-				compatible = "qcom,rpm-pm8058-regulators";
-
-				pm8058_l0: l0 {};
-				pm8058_l1: l1 {};
-				pm8058_l2: l2 {};
-				pm8058_l3: l3 {};
-				pm8058_l4: l4 {};
-				pm8058_l5: l5 {};
-				pm8058_l6: l6 {};
-				pm8058_l7: l7 {};
-				pm8058_l8: l8 {};
-				pm8058_l9: l9 {};
-				pm8058_l10: l10 {};
-				pm8058_l11: l11 {};
-				pm8058_l12: l12 {};
-				pm8058_l13: l13 {};
-				pm8058_l14: l14 {};
-				pm8058_l15: l15 {};
-				pm8058_l16: l16 {};
-				pm8058_l17: l17 {};
-				pm8058_l18: l18 {};
-				pm8058_l19: l19 {};
-				pm8058_l20: l20 {};
-				pm8058_l21: l21 {};
-				pm8058_l22: l22 {};
-				pm8058_l23: l23 {};
-				pm8058_l24: l24 {};
-				pm8058_l25: l25 {};
-
-				pm8058_s0: s0 {};
-				pm8058_s1: s1 {};
-				pm8058_s2: s2 {};
-				pm8058_s3: s3 {};
-				pm8058_s4: s4 {};
-
-				pm8058_lvs0: lvs0 {};
-				pm8058_lvs1: lvs1 {};
-
-				pm8058_ncp: ncp {};
-			};
-		};
-
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: mmc@12400000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12400000 0x8000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <48000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-			};
-
-			sdcc2: mmc@12140000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12140000 0x8000>;
-				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <48000000>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-			};
-
-			sdcc3: mmc@12180000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12180000 0x8000>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <48000000>;
-				no-1-8-v;
-			};
-
-			sdcc4: mmc@121c0000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x121c0000 0x8000>;
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				max-frequency = <48000000>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-			};
-
-			sdcc5: mmc@12200000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12200000 0x8000>;
-				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <48000000>;
-			};
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-msm8660", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-	};
-
-};
diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts
deleted file mode 100644
index c8d34de8a71e4..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts
+++ /dev/null
@@ -1,3 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "arm64/qcom/msm8916-samsung-e5.dts"
-#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts
deleted file mode 100644
index 85be286c86083..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts
+++ /dev/null
@@ -1,3 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "arm64/qcom/msm8916-samsung-e7.dts"
-#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts
deleted file mode 100644
index d3abe0536238c..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts
+++ /dev/null
@@ -1,3 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "arm64/qcom/msm8916-samsung-grandmax.dts"
-#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts
deleted file mode 100644
index dee2c20af3553..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts
+++ /dev/null
@@ -1,3 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "arm64/qcom/msm8916-samsung-serranove.dts"
-#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom-msm8916-smp.dtsi b/arch/arm/boot/dts/qcom-msm8916-smp.dtsi
deleted file mode 100644
index 36328dbe4212b..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8916-smp.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/ {
-	cpus {
-		cpu@0 {
-			enable-method = "qcom,msm8916-smp";
-		};
-		cpu@1 {
-			enable-method = "qcom,msm8916-smp";
-		};
-		cpu@2 {
-			enable-method = "qcom,msm8916-smp";
-		};
-		cpu@3 {
-			enable-method = "qcom,msm8916-smp";
-		};
-
-		idle-states {
-			/delete-property/ entry-method;
-		};
-	};
-
-	psci {
-		status = "disabled";
-	};
-};
-
-&CPU_SLEEP_0 {
-	compatible = "qcom,idle-state-spc";
-};
-
-&cpu0_acc {
-	status = "okay";
-};
-
-&cpu0_saw {
-	status = "okay";
-};
-
-&cpu1_acc {
-	status = "okay";
-};
-
-&cpu1_saw {
-	status = "okay";
-};
-
-&cpu2_acc {
-	status = "okay";
-};
-
-&cpu2_saw {
-	status = "okay";
-};
-
-&cpu3_acc {
-	status = "okay";
-};
-
-&cpu3_saw {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
deleted file mode 100644
index 8fa2befa629ae..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ /dev/null
@@ -1,352 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/input/input.h>
-
-#include "qcom-msm8960.dtsi"
-
-/ {
-	model = "Qualcomm MSM8960 CDP";
-	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
-
-	aliases {
-		serial0 = &gsbi5_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		ext_l2: gpio-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "ext_l2";
-			gpio = <&msmgpio 91 0>;
-			startup-delay-us = <10000>;
-			enable-active-high;
-		};
-	};
-};
-
-&gsbi1 {
-	qcom,mode = <GSBI_PROT_SPI>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_default>;
-	status = "okay";
-};
-
-&gsbi1_spi {
-	status = "okay";
-
-	ethernet@0 {
-		compatible = "micrel,ks8851";
-		reg = <0>;
-		interrupt-parent = <&msmgpio>;
-		interrupts = <90 IRQ_TYPE_LEVEL_LOW>;
-		spi-max-frequency = <5400000>;
-		vdd-supply = <&ext_l2>;
-		vdd-io-supply = <&pm8921_lvs6>;
-		reset-gpios = <&msmgpio 89 0>;
-	};
-};
-
-&gsbi5 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-};
-
-&gsbi5_serial {
-	status = "okay";
-};
-
-&msmgpio {
-	spi1_default: spi1-default-state {
-		 mosi-pins {
-			pins = "gpio6";
-			function = "gsbi1";
-			drive-strength = <12>;
-			bias-disable;
-		 };
-
-		 miso-pins {
-			pins = "gpio7";
-			function = "gsbi1";
-			drive-strength = <12>;
-			bias-disable;
-		 };
-
-		 cs-pins {
-			pins = "gpio8";
-			function = "gsbi1";
-			drive-strength = <12>;
-			bias-disable;
-			output-low;
-		 };
-
-		 clk-pins {
-			pins = "gpio9";
-			function = "gsbi1";
-			drive-strength = <12>;
-			bias-disable;
-		 };
-	};
-};
-
-&pmicintc {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_VOLUMEUP)
-			MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
-			MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(0, 3, KEY_CAMERA)
-			>;
-		keypad,num-rows = <1>;
-		keypad,num-columns = <5>;
-	};
-};
-
-&rpm {
-	regulators {
-		compatible = "qcom,rpm-pm8921-regulators";
-		vin_lvs1_3_6-supply = <&pm8921_s4>;
-		vin_lvs2-supply = <&pm8921_s4>;
-		vin_lvs4_5_7-supply = <&pm8921_s4>;
-		vdd_ncp-supply = <&pm8921_l6>;
-		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-		vdd_l21_l23_l29-supply = <&pm8921_s8>;
-		vdd_l24-supply = <&pm8921_s1>;
-		vdd_l25-supply = <&pm8921_s1>;
-		vdd_l27-supply = <&pm8921_s7>;
-		vdd_l28-supply = <&pm8921_s7>;
-
-		/* Buck SMPS */
-		pm8921_s1: s1 {
-			regulator-always-on;
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			qcom,switch-mode-frequency = <3200000>;
-			bias-pull-down;
-		};
-
-		pm8921_s2: s2 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-
-		pm8921_s3: s3 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1150000>;
-			qcom,switch-mode-frequency = <4800000>;
-			bias-pull-down;
-		};
-
-		pm8921_s4: s4 {
-			regulator-always-on;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
-		};
-
-		pm8921_s7: s7 {
-			regulator-min-microvolt = <1150000>;
-			regulator-max-microvolt = <1150000>;
-			qcom,switch-mode-frequency = <3200000>;
-			bias-pull-down;
-		};
-
-		pm8921_s8: s8 {
-			regulator-always-on;
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-
-		/* PMOS LDO */
-		pm8921_l1: l1 {
-			regulator-always-on;
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			bias-pull-down;
-		};
-
-		pm8921_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-
-		pm8921_l3: l3 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-			bias-pull-down;
-		};
-
-		pm8921_l4: l4 {
-			regulator-always-on;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-
-		pm8921_l5: l5 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			bias-pull-down;
-		};
-
-		pm8921_l6: l6 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			bias-pull-down;
-		};
-
-		pm8921_l7: l7 {
-			regulator-always-on;
-			regulator-min-microvolt = <1850000>;
-			regulator-max-microvolt = <2950000>;
-			bias-pull-down;
-		};
-
-		pm8921_l8: l8 {
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3000000>;
-			bias-pull-down;
-		};
-
-		pm8921_l9: l9 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			bias-pull-down;
-		};
-
-		pm8921_l10: l10 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			bias-pull-down;
-		};
-
-		pm8921_l11: l11 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-			bias-pull-down;
-		};
-
-		pm8921_l12: l12 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-
-		pm8921_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-
-		pm8921_l15: l15 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			bias-pull-down;
-		};
-
-		pm8921_l16: l16 {
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			bias-pull-down;
-		};
-
-		pm8921_l17: l17 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			bias-pull-down;
-		};
-
-		pm8921_l18: l18 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			bias-pull-down;
-		};
-
-		pm8921_l21: l21 {
-			regulator-min-microvolt = <1900000>;
-			regulator-max-microvolt = <1900000>;
-			bias-pull-down;
-		};
-
-		pm8921_l22: l22 {
-			regulator-min-microvolt = <2750000>;
-			regulator-max-microvolt = <2750000>;
-			bias-pull-down;
-		};
-
-		pm8921_l23: l23 {
-			regulator-always-on;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-
-		pm8921_l24: l24 {
-			regulator-min-microvolt = <750000>;
-			regulator-max-microvolt = <1150000>;
-			bias-pull-down;
-		};
-
-		pm8921_l25: l25 {
-			regulator-always-on;
-			regulator-min-microvolt = <1250000>;
-			regulator-max-microvolt = <1250000>;
-			bias-pull-down;
-		};
-
-		/* Low Voltage Switch */
-		pm8921_lvs1: lvs1 {
-			bias-pull-down;
-		};
-
-		pm8921_lvs2: lvs2 {
-			bias-pull-down;
-		};
-
-		pm8921_lvs3: lvs3 {
-			bias-pull-down;
-		};
-
-		pm8921_lvs4: lvs4 {
-			bias-pull-down;
-		};
-
-		pm8921_lvs5: lvs5 {
-			bias-pull-down;
-		};
-
-		pm8921_lvs6: lvs6 {
-			bias-pull-down;
-		};
-
-		pm8921_lvs7: lvs7 {
-			bias-pull-down;
-		};
-
-		pm8921_ncp: ncp {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,switch-mode-frequency = <1600000>;
-		};
-	};
-};
-
-/* eMMC */
-&sdcc1 {
-	status = "okay";
-};
-
-/* External micro SD card */
-&sdcc3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
deleted file mode 100644
index 616fef2ea6825..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ /dev/null
@@ -1,375 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
-#include <dt-bindings/clock/qcom,lcc-msm8960.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm MSM8960";
-	compatible = "qcom,msm8960";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_PPI 14 0x304>;
-
-		cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-			cache-unified;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 10 0x304>;
-		qcom,no-pc-write;
-	};
-
-	clocks {
-		cxo_board: cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-			clock-output-names = "cxo_board";
-		};
-
-		pxo_board: pxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-			clock-output-names = "pxo_board";
-		};
-
-		sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "sleep_clk";
-		};
-	};
-
-	/* Temporary fixed regulator */
-	vsdcc_fixed: vsdcc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "SDCC Power";
-		regulator-min-microvolt = <2700000>;
-		regulator-max-microvolt = <2700000>;
-		regulator-always-on;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer",
-				     "qcom,msm-timer";
-			interrupts = <GIC_PPI 1 0x301>,
-				     <GIC_PPI 2 0x301>,
-				     <GIC_PPI 3 0x301>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>;
-			cpu-offset = <0x80000>;
-		};
-
-		msmgpio: pinctrl@800000 {
-			compatible = "qcom,msm8960-pinctrl";
-			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 152>;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x800000 0x4000>;
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-msm8960";
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x900000 0x4000>;
-			clocks = <&cxo_board>,
-				 <&pxo_board>,
-				 <&lcc PLL4>;
-			clock-names = "cxo", "pxo", "pll4";
-		};
-
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-msm8960";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			clocks = <&pxo_board>,
-				 <&gcc PLL4_VOTE>,
-				 <0>,
-				 <0>, <0>,
-				 <0>, <0>,
-				 <0>;
-			clock-names = "pxo",
-				      "pll4_vote",
-				      "mi2s_codec_clk",
-				      "codec_i2s_mic_codec_clk",
-				      "spare_i2s_mic_codec_clk",
-				      "codec_i2s_spkr_codec_clk",
-				      "spare_i2s_spkr_codec_clk",
-				      "pcm_codec_clk";
-		};
-
-		clock-controller@4000000 {
-			compatible = "qcom,mmcc-msm8960";
-			reg = <0x4000000 0x1000>;
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			clocks = <&pxo_board>,
-				 <&gcc PLL3>,
-				 <&gcc PLL8_VOTE>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>;
-			clock-names = "pxo",
-				      "pll3",
-				      "pll8_vote",
-				      "dsi1pll",
-				      "dsi1pllbyte",
-				      "dsi2pll",
-				      "dsi2pllbyte",
-				      "hdmipll";
-		};
-
-		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon";
-			reg = <0x2011000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			#clock-cells = <0>;
-		};
-
-		rpm: rpm@108000 {
-			compatible = "qcom,rpm-msm8960";
-			reg = <0x108000 0x1000>;
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-			};
-		};
-
-		acc0: clock-controller@2088000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu0_aux";
-			#clock-cells = <0>;
-		};
-
-		acc1: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu1_aux";
-			#clock-cells = <0>;
-		};
-
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		gsbi5: gsbi@16400000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x16400000 0x100>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi5_serial: serial@16440000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16440000 0x1000>,
-				      <0x16400000 0x1000>;
-				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&msmgpio>;
-				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				keypad@148 {
-					compatible = "qcom,pm8921-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
-						     <75 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-			};
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
-		};
-
-		sdcc3: mmc@12180000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00051180>;
-			status = "disabled";
-			reg = <0x12180000 0x8000>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-			clock-names = "mclk", "apb_pclk";
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <192000000>;
-			no-1-8-v;
-			vmmc-supply = <&vsdcc_fixed>;
-		};
-
-		sdcc1: mmc@12400000 {
-			status = "disabled";
-			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00051180>;
-			reg = <0x12400000 0x8000>;
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-			clock-names = "mclk", "apb_pclk";
-			bus-width = <8>;
-			max-frequency = <96000000>;
-			non-removable;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			vmmc-supply = <&vsdcc_fixed>;
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-msm8960", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-
-		gsbi1: gsbi@16000000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <1>;
-			reg = <0x16000000 0x100>;
-			clocks = <&gcc GSBI1_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi1_spi: spi@16080000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x16080000 0x1000>;
-				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-				spi-max-frequency = <24000000>;
-				cs-gpios = <&msmgpio 8 0>;
-
-				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
deleted file mode 100644
index 861695cecf84e..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ /dev/null
@@ -1,661 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "LGE MSM 8974 HAMMERHEAD";
-	compatible = "lge,hammerhead", "qcom,msm8974";
-	chassis-type = "handset";
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp2_uart4;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		key-volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		key-volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_regulator_pin>;
-	};
-};
-
-&blsp1_i2c1 {
-	status = "okay";
-	clock-frequency = <100000>;
-
-	charger: bq24192@6b {
-		compatible = "ti,bq24192";
-		reg = <0x6b>;
-		interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
-
-		omit-battery-class;
-
-		usb_otg_vbus: usb-otg-vbus { };
-	};
-
-	fuelgauge: max17048@36 {
-		compatible = "maxim,max17048";
-		reg = <0x36>;
-
-		maxim,double-soc;
-		maxim,rcomp = /bits/ 8 <0x4d>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&fuelgauge_pin>;
-
-		maxim,alert-low-soc-level = <2>;
-	};
-};
-
-&blsp1_i2c2 {
-	status = "okay";
-	clock-frequency = <355000>;
-
-	synaptics@70 {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x70>;
-
-		interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>;
-		vdd-supply = <&pm8941_l22>;
-		vio-supply = <&pm8941_lvs3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_pin>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f12@12 {
-			reg = <0x12>;
-			syna,sensor-type = <1>;
-		};
-	};
-};
-
-&blsp1_i2c3 {
-	status = "okay";
-	clock-frequency = <100000>;
-
-	avago_apds993@39 {
-		compatible = "avago,apds9930";
-		reg = <0x39>;
-		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
-		vdd-supply = <&pm8941_l17>;
-		vddio-supply = <&pm8941_lvs1>;
-		led-max-microamp = <100000>;
-		amstaos,proximity-diodes = <0>;
-	};
-};
-
-&blsp2_i2c5 {
-	status = "okay";
-	clock-frequency = <355000>;
-
-	led-controller@38 {
-		compatible = "ti,lm3630a";
-		status = "okay";
-		reg = <0x38>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@0 {
-			reg = <0>;
-			led-sources = <0 1>;
-			label = "lcd-backlight";
-			default-brightness = <200>;
-		};
-	};
-};
-
-&blsp2_i2c6 {
-	status = "okay";
-	clock-frequency = <100000>;
-
-	mpu6515@68 {
-		compatible = "invensense,mpu6515";
-		reg = <0x68>;
-		interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>;
-		vddio-supply = <&pm8941_lvs1>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&mpu6515_pin>;
-
-		mount-matrix = "0", "-1", "0",
-				"-1", "0", "0",
-				"0", "0", "1";
-
-		i2c-gate {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ak8963@f {
-				compatible = "asahi-kasei,ak8963";
-				reg = <0x0f>;
-				gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>;
-				vid-supply = <&pm8941_lvs1>;
-				vdd-supply = <&pm8941_l17>;
-			};
-
-			bmp280@76 {
-				compatible = "bosch,bmp280";
-				reg = <0x76>;
-				vdda-supply = <&pm8941_lvs1>;
-				vddd-supply = <&pm8941_l17>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	status = "okay";
-};
-
-&blsp2_uart4 {
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <3000000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_pin>;
-
-		host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&dsi0 {
-	status = "okay";
-
-	vdda-supply = <&pm8941_l2>;
-	vdd-supply = <&pm8941_lvs3>;
-	vddio-supply = <&pm8941_l12>;
-
-	panel: panel@0 {
-		reg = <0>;
-		compatible = "lg,acx467akm-7";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_pin>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
-			};
-		};
-	};
-};
-
-&dsi0_out {
-	remote-endpoint = <&panel_in>;
-	data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
-	status = "okay";
-
-	vddio-supply = <&pm8941_l12>;
-};
-
-&mdss {
-	status = "okay";
-};
-
-&pm8941_gpios {
-	gpio_keys_pin_a: gpio-keys-active-state {
-		pins = "gpio2", "gpio3";
-		function = "normal";
-
-		bias-pull-up;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	fuelgauge_pin: fuelgauge-int-state {
-		pins = "gpio9";
-		function = "normal";
-
-		bias-disable;
-		input-enable;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	wlan_sleep_clk_pin: wl-sleep-clk-state {
-		pins = "gpio16";
-		function = "func2";
-
-		output-high;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	wlan_regulator_pin: wl-reg-active-state {
-		pins = "gpio17";
-		function = "normal";
-
-		bias-disable;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	otg {
-		gpio-hog;
-		gpios = <35 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "otg-gpio";
-	};
-};
-
-&pm8941_lpg {
-	status = "okay";
-
-	qcom,power-source = <1>;
-
-	multi-led {
-		color = <LED_COLOR_ID_RGB>;
-		function = LED_FUNCTION_STATUS;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@7 {
-			reg = <7>;
-			color = <LED_COLOR_ID_RED>;
-		};
-
-		led@6 {
-			reg = <6>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
-
-		led@5 {
-			reg = <5>;
-			color = <LED_COLOR_ID_BLUE>;
-		};
-	};
-};
-
-&remoteproc_adsp {
-	cx-supply = <&pm8841_s2>;
-};
-
-&remoteproc_mss {
-	cx-supply = <&pm8841_s2>;
-	mss-supply = <&pm8841_s3>;
-	mx-supply = <&pm8841_s1>;
-	pll-supply = <&pm8941_l12>;
-};
-
-&rpm_requests {
-	regulators-0 {
-		compatible = "qcom,rpm-pm8841-regulators";
-
-		pm8841_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s2: s2 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s3: s3 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s4: s4 {
-			regulator-min-microvolt = <815000>;
-			regulator-max-microvolt = <900000>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,rpm-pm8941-regulators";
-
-		vdd_l1_l3-supply = <&pm8941_s1>;
-		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-		vdd_l4_l11-supply = <&pm8941_s1>;
-		vdd_l5_l7-supply = <&pm8941_s2>;
-		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
-		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-		vdd_l21-supply = <&vreg_boost>;
-
-		pm8941_s1: s1 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s2: s2 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-			regulator-boot-on;
-		};
-
-		pm8941_s3: s3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l3: l3 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l4: l4 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8941_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8941_l11: l11 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pm8941_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8941_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l17: l17 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l19: l19 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pm8941_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-			regulator-boot-on;
-		};
-
-		pm8941_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pm8941_l23: l23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8941_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-			regulator-boot-on;
-		};
-
-		pm8941_lvs1: lvs1 {};
-		pm8941_lvs3: lvs3 {};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l20>;
-	vqmmc-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	max-frequency = <100000000>;
-	vmmc-supply = <&vreg_wlan>;
-	vqmmc-supply = <&pm8941_s3>;
-	non-removable;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-
-	bcrmf@1 {
-		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
-		reg = <1>;
-
-		brcm,drive-strength = <10>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_sleep_clk_pin>;
-	};
-};
-
-&tlmm {
-	sdc1_on: sdc1-on-state {
-		clk-pins {
-			pins = "sdc1_clk";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	sdc2_on: sdc2-on-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			drive-strength = <6>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-	};
-
-	mpu6515_pin: mpu6515-state {
-		pins = "gpio73";
-		function = "gpio";
-		bias-disable;
-	};
-
-	touch_pin: touch-state {
-		int-pins {
-			pins = "gpio5";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		reset-pins {
-			pins = "gpio8";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	panel_pin: panel-state {
-		pins = "gpio12";
-		function = "mdp_vsync";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	bt_pin: bt-state {
-		hostwake-pins {
-			pins = "gpio42";
-			function = "gpio";
-		};
-
-		devwake-pins {
-			pins = "gpio62";
-			function = "gpio";
-		};
-
-		shutdown-pins {
-			pins = "gpio41";
-			function = "gpio";
-		};
-	};
-};
-
-&usb {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-
-	extcon = <&charger>, <&usb_id>;
-	vbus-supply = <&usb_otg_vbus>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-};
-
-&usb_hs1_phy {
-	status = "okay";
-
-	v1p8-supply = <&pm8941_l6>;
-	v3p3-supply = <&pm8941_l24>;
-
-	qcom,init-seq = /bits/ 8 <0x1 0x64>;
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
deleted file mode 100644
index 9f2ab5c122d0b..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974-sony-xperia-rhine.dtsi"
-
-/ {
-	model = "Sony Xperia Z1 Compact";
-	compatible = "sony,xperia-amami", "qcom,msm8974";
-	chassis-type = "handset";
-};
-
-&smbb {
-	qcom,fast-charge-safe-current = <1300000>;
-	qcom,fast-charge-current-limit = <1300000>;
-	qcom,dc-current-limit = <1300000>;
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
deleted file mode 100644
index 9028f17e5c4a7..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974-sony-xperia-rhine.dtsi"
-
-/ {
-	model = "Sony Xperia Z1";
-	compatible = "sony,xperia-honami", "qcom,msm8974";
-	chassis-type = "handset";
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
deleted file mode 100644
index 68a2f9094e536..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
+++ /dev/null
@@ -1,495 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		key-volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		key-camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		key-camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		key-volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		ramoops@3e8e0000 {
-			compatible = "ramoops";
-			reg = <0x3e8e0000 0x200000>;
-
-			console-size = <0x100000>;
-			record-size = <0x10000>;
-			ftrace-size = <0x10000>;
-			pmsg-size = <0x80000>;
-		};
-	};
-};
-
-&blsp1_i2c2 {
-	status = "okay";
-	clock-frequency = <355000>;
-
-	synaptics@2c {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x2c>;
-
-		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd-supply = <&pm8941_l22>;
-		vio-supply = <&pm8941_lvs3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_pin>;
-
-		syna,startup-delay-ms = <10>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f11@11 {
-			reg = <0x11>;
-			touchscreen-inverted-x;
-			syna,sensor-type = <1>;
-		};
-	};
-};
-
-&blsp1_i2c6 {
-	status = "okay";
-	clock-frequency = <355000>;
-
-	nfc@28 {
-		compatible = "nxp,pn544-i2c";
-		reg = <0x28>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <59 IRQ_TYPE_EDGE_RISING>;
-
-		enable-gpios = <&pm8941_gpios 23 GPIO_ACTIVE_HIGH>;
-		firmware-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
-
-&blsp2_dma {
-	qcom,controlled-remotely;
-};
-
-&blsp2_i2c5 {
-	status = "okay";
-	clock-frequency = <355000>;
-
-	/* sii8334 MHL HDMI bridge */
-};
-
-&pm8941_coincell {
-	status = "okay";
-	qcom,rset-ohms = <2100>;
-	qcom,vset-millivolts = <3000>;
-};
-
-&pm8941_gpios {
-	gpio_keys_pin_a: gpio-keys-active-state {
-		pins = "gpio2", "gpio3", "gpio4", "gpio5";
-		function = "normal";
-
-		bias-pull-up;
-		power-source = <PM8941_GPIO_S3>;
-	};
-};
-
-&pm8941_lpg {
-	status = "okay";
-
-	qcom,power-source = <1>;
-
-	multi-led {
-		color = <LED_COLOR_ID_RGB>;
-		function = LED_FUNCTION_STATUS;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@5 {
-			reg = <5>;
-			color = <LED_COLOR_ID_BLUE>;
-		};
-
-		led@6 {
-			reg = <6>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
-
-		led@7 {
-			reg = <7>;
-			color = <LED_COLOR_ID_RED>;
-		};
-	};
-};
-
-&pm8941_wled {
-	status = "okay";
-
-	qcom,cs-out;
-	qcom,current-limit = <20>;
-	qcom,current-boost-limit = <805>;
-	qcom,switching-freq = <1600>;
-	qcom,ovp = <29>;
-	qcom,num-strings = <2>;
-};
-
-&remoteproc_adsp {
-	cx-supply = <&pm8841_s2>;
-};
-
-&remoteproc_mss {
-	cx-supply = <&pm8841_s2>;
-	mss-supply = <&pm8841_s3>;
-	mx-supply = <&pm8841_s1>;
-	pll-supply = <&pm8941_l12>;
-};
-
-&rpm_requests {
-	regulators-0 {
-		compatible = "qcom,rpm-pm8841-regulators";
-
-		pm8841_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s2: s2 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s3: s3 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s4: s4 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,rpm-pm8941-regulators";
-
-		vdd_l1_l3-supply = <&pm8941_s1>;
-		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-		vdd_l4_l11-supply = <&pm8941_s1>;
-		vdd_l5_l7-supply = <&pm8941_s2>;
-		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-		vdd_l21-supply = <&vreg_boost>;
-
-		pm8941_s1: s1 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s2: s2 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-			regulator-boot-on;
-		};
-
-		pm8941_s3: s3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s4: s4 {
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		pm8941_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l3: l3 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l4: l4 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8941_l11: l11 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1350000>;
-		};
-
-		pm8941_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8941_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l17: l17 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l19: l19 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pm8941_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-			regulator-boot-on;
-		};
-
-		pm8941_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8941_l23: l23 {
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-
-		pm8941_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-			regulator-boot-on;
-		};
-
-		pm8941_lvs3: lvs3 {};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l20>;
-	vqmmc-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l21>;
-	vqmmc-supply = <&pm8941_l13>;
-
-	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-};
-
-&smbb {
-	qcom,fast-charge-safe-current = <1500000>;
-	qcom,fast-charge-current-limit = <1500000>;
-	qcom,dc-current-limit = <1800000>;
-	qcom,fast-charge-safe-voltage = <4400000>;
-	qcom,fast-charge-high-threshold-voltage = <4350000>;
-	qcom,fast-charge-low-threshold-voltage = <3400000>;
-	qcom,auto-recharge-threshold-voltage = <4200000>;
-	qcom,minimum-input-voltage = <4300000>;
-};
-
-&tlmm {
-	ts_int_pin: touch-int-state {
-		pins = "gpio61";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	sdc1_on: sdc1-on-state {
-		clk-pins {
-			pins = "sdc1_clk";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	sdc2_on: sdc-on-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			drive-strength = <10>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-
-		cd-pins {
-			pins = "gpio62";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-};
-
-&usb {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-};
-
-&usb_hs1_phy {
-	status = "okay";
-
-	v1p8-supply = <&pm8941_l6>;
-	v3p3-supply = <&pm8941_l24>;
-
-	extcon = <&smbb>;
-	qcom,init-seq = /bits/ 8 <0x1 0x64>;
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
deleted file mode 100644
index 7ed0d925a4e99..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ /dev/null
@@ -1,2406 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/interconnect/qcom,msm8974.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8974.h>
-#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/reset/qcom,gcc-msm8974.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	clocks {
-		xo_board: xo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_PPI 9 0xf04>;
-
-		CPU0: cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU1: cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU2: cpu@2 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-			qcom,saw = <&saw2>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU3: cpu@3 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-			qcom,saw = <&saw3>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-			cache-unified;
-			qcom,saw = <&saw_l2>;
-		};
-
-		idle-states {
-			CPU_SPC: spc {
-				compatible = "qcom,idle-state-spc",
-						"arm,idle-state";
-				entry-latency-us = <150>;
-				exit-latency-us = <200>;
-				min-residency-us = <2000>;
-			};
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-msm8974", "qcom,scm";
-			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 7 0xf04>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mpss_region: mpss@8000000 {
-			reg = <0x08000000 0x5100000>;
-			no-map;
-		};
-
-		mba_region: mba@d100000 {
-			reg = <0x0d100000 0x100000>;
-			no-map;
-		};
-
-		wcnss_region: wcnss@d200000 {
-			reg = <0x0d200000 0xa00000>;
-			no-map;
-		};
-
-		adsp_region: adsp@dc00000 {
-			reg = <0x0dc00000 0x1900000>;
-			no-map;
-		};
-
-		venus_region: memory@f500000 {
-			reg = <0x0f500000 0x500000>;
-			no-map;
-		};
-
-		smem_region: smem@fa00000 {
-			reg = <0xfa00000 0x200000>;
-			no-map;
-		};
-
-		tz_region: memory@fc00000 {
-			reg = <0x0fc00000 0x160000>;
-			no-map;
-		};
-
-		rfsa_mem: memory@fd60000 {
-			reg = <0x0fd60000 0x20000>;
-			no-map;
-		};
-
-		rmtfs@fd80000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0fd80000 0x180000>;
-			no-map;
-
-			qcom,client-id = <1>;
-		};
-	};
-
-	smem {
-		compatible = "qcom,smem";
-
-		memory-region = <&smem_region>;
-		qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
-	smp2p-adsp {
-		compatible = "qcom,smp2p";
-		qcom,smem = <443>, <429>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
-
-		qcom,ipc = <&apcs 8 10>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <2>;
-
-		adsp_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		adsp_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smp2p-modem {
-		compatible = "qcom,smp2p";
-		qcom,smem = <435>, <428>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
-
-		qcom,ipc = <&apcs 8 14>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <1>;
-
-		modem_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		modem_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smp2p-wcnss {
-		compatible = "qcom,smp2p";
-		qcom,smem = <451>, <431>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
-
-		qcom,ipc = <&apcs 8 18>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <4>;
-
-		wcnss_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-
-			#qcom,smem-state-cells = <1>;
-		};
-
-		wcnss_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smsm {
-		compatible = "qcom,smsm";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		qcom,ipc-1 = <&apcs 8 13>;
-		qcom,ipc-2 = <&apcs 8 9>;
-		qcom,ipc-3 = <&apcs 8 19>;
-
-		apps_smsm: apps@0 {
-			reg = <0>;
-
-			#qcom,smem-state-cells = <1>;
-		};
-
-		modem_smsm: modem@1 {
-			reg = <1>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		adsp_smsm: adsp@2 {
-			reg = <2>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		wcnss_smsm: wcnss@7 {
-			reg = <7>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests: rpm_requests {
-				compatible = "qcom,rpm-msm8974";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
-					#clock-cells = <1>;
-					clocks = <&xo_board>;
-					clock-names = "xo";
-				};
-			};
-		};
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@f9000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0xf9000000 0x1000>,
-			      <0xf9002000 0x1000>;
-		};
-
-		apcs: syscon@f9011000 {
-			compatible = "syscon";
-			reg = <0xf9011000 0x1000>;
-		};
-
-		timer@f9020000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xf9020000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@f9021000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9021000 0x1000>,
-				      <0xf9022000 0x1000>;
-			};
-
-			frame@f9023000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9023000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9024000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9024000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9025000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9025000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9026000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9026000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9027000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9027000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9028000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9028000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		saw0: power-controller@f9089000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw1: power-controller@f9099000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw2: power-controller@f90a9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw3: power-controller@f90b9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
-		acc0: power-manager@f9088000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		acc1: power-manager@f9098000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		acc2: power-manager@f90a8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		acc3: power-manager@f90b8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		sdhc_1: mmc@f9824900 {
-			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc", "core";
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "core", "xo";
-			bus-width = <8>;
-			non-removable;
-
-			status = "disabled";
-		};
-
-		sdhc_3: mmc@f9864900 {
-			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
-			reg-names = "hc", "core";
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
-				 <&gcc GCC_SDCC3_APPS_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "core", "xo";
-			bus-width = <4>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			status = "disabled";
-		};
-
-		sdhc_2: mmc@f98a4900 {
-			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc", "core";
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "core", "xo";
-			bus-width = <4>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			status = "disabled";
-		};
-
-		blsp1_uart1: serial@f991d000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf991d000 0x1000>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		blsp1_uart2: serial@f991e000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf991e000 0x1000>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_uart2_default>;
-			status = "disabled";
-		};
-
-		blsp1_i2c1: i2c@f9923000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9923000 0x1000>;
-			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_i2c1_default>;
-			pinctrl-1 = <&blsp1_i2c1_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c2: i2c@f9924000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9924000 0x1000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_i2c2_default>;
-			pinctrl-1 = <&blsp1_i2c2_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c3: i2c@f9925000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9925000 0x1000>;
-			interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_i2c3_default>;
-			pinctrl-1 = <&blsp1_i2c3_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c6: i2c@f9928000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9928000 0x1000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_i2c6_default>;
-			pinctrl-1 = <&blsp1_i2c6_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp2_dma: dma-controller@f9944000 {
-			compatible = "qcom,bam-v1.4.0";
-			reg = <0xf9944000 0x19000>;
-			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		blsp2_uart1: serial@f995d000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf995d000 0x1000>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_uart1_default>;
-			pinctrl-1 = <&blsp2_uart1_sleep>;
-			status = "disabled";
-		};
-
-		blsp2_uart2: serial@f995e000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf995e000 0x1000>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		blsp2_uart4: serial@f9960000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf9960000 0x1000>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp2_uart4_default>;
-			status = "disabled";
-		};
-
-		blsp2_i2c2: i2c@f9964000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9964000 0x1000>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c2_default>;
-			pinctrl-1 = <&blsp2_i2c2_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp2_i2c5: i2c@f9967000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9967000 0x1000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c5_default>;
-			pinctrl-1 = <&blsp2_i2c5_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp2_i2c6: i2c@f9968000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9968000 0x1000>;
-			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c6_default>;
-			pinctrl-1 = <&blsp2_i2c6_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		usb: usb@f9a55000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0xf9a55000 0x200>,
-			      <0xf9a55200 0x200>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
-				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			clock-names = "iface", "core";
-			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			assigned-clock-rates = <75000000>;
-			resets = <&gcc GCC_USB_HS_BCR>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			dr_mode = "otg";
-			ahb-burst-config = <0>;
-			phy-names = "usb-phy";
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs1_phy: phy@a {
-					compatible = "qcom,usb-hs-phy-msm8974",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
-					reset-names = "phy", "por";
-					status = "disabled";
-				};
-
-				usb_hs2_phy: phy@b {
-					compatible = "qcom,usb-hs-phy-msm8974",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
-					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>;
-					reset-names = "phy", "por";
-					status = "disabled";
-				};
-			};
-		};
-
-		rng@f9bff000 {
-			compatible = "qcom,prng";
-			reg = <0xf9bff000 0x200>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "core";
-		};
-
-		pronto: remoteproc@fb21b000 {
-			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
-			reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
-			reg-names = "ccu", "dxe", "pmu";
-
-			memory-region = <&wcnss_region>;
-
-			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-			qcom,smem-states = <&wcnss_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			iris {
-				compatible = "qcom,wcn3680";
-
-				clocks = <&rpmcc RPM_SMD_CXO_A2>;
-				clock-names = "xo";
-			};
-
-			smd-edge {
-				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,ipc = <&apcs 8 17>;
-				qcom,smd-edge = <6>;
-
-				wcnss {
-					compatible = "qcom,wcnss";
-					qcom,smd-channels = "WCNSS_CTRL";
-					status = "disabled";
-
-					qcom,mmio = <&pronto>;
-
-					bt {
-						compatible = "qcom,wcnss-bt";
-					};
-
-					wifi {
-						compatible = "qcom,wcnss-wlan";
-
-						interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
-							     <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
-						interrupt-names = "tx", "rx";
-
-						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
-						qcom,smem-state-names = "tx-enable",
-									"tx-rings-empty";
-					};
-				};
-			};
-		};
-
-		sram@fc190000 {
-			compatible = "qcom,msm8974-rpm-stats";
-			reg = <0xfc190000 0x10000>;
-		};
-
-		etf@fc307000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0xfc307000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			out-ports {
-				port {
-					etf_out: endpoint {
-						remote-endpoint = <&replicator_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					etf_in: endpoint {
-						remote-endpoint = <&merger_out>;
-					};
-				};
-			};
-		};
-
-		tpiu@fc318000 {
-			compatible = "arm,coresight-tpiu", "arm,primecell";
-			reg = <0xfc318000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				port {
-					tpiu_in: endpoint {
-						remote-endpoint = <&replicator_out1>;
-					};
-				 };
-			};
-		};
-
-		funnel@fc31a000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0xfc31a000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/*
-				 * Not described input ports:
-				 * 0 - not-connected
-				 * 1 - connected trought funnel to Multimedia CPU
-				 * 2 - connected to Wireless CPU
-				 * 3 - not-connected
-				 * 4 - not-connected
-				 * 6 - not-connected
-				 * 7 - connected to STM
-				 */
-				port@5 {
-					reg = <5>;
-					funnel1_in5: endpoint {
-						remote-endpoint = <&kpss_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					funnel1_out: endpoint {
-						remote-endpoint = <&merger_in1>;
-					};
-				};
-			};
-		};
-
-		funnel@fc31b000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0xfc31b000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/*
-				 * Not described input ports:
-				 * 0 - connected trought funnel to Audio, Modem and
-				 *     Resource and Power Manager CPU's
-				 * 2...7 - not-connected
-				 */
-				port@1 {
-					reg = <1>;
-					merger_in1: endpoint {
-						remote-endpoint = <&funnel1_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					merger_out: endpoint {
-						remote-endpoint = <&etf_in>;
-					};
-				};
-			};
-		};
-
-		replicator@fc31c000 {
-			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
-			reg = <0xfc31c000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					replicator_out0: endpoint {
-						remote-endpoint = <&etr_in>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					replicator_out1: endpoint {
-						remote-endpoint = <&tpiu_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint = <&etf_out>;
-					};
-				};
-			};
-		};
-
-		etr@fc322000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0xfc322000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				port {
-					etr_in: endpoint {
-						remote-endpoint = <&replicator_out0>;
-					};
-				};
-			};
-		};
-
-		etm@fc33c000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0xfc33c000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			cpu = <&CPU0>;
-
-			out-ports {
-				port {
-					etm0_out: endpoint {
-						remote-endpoint = <&kpss_in0>;
-					};
-				};
-			};
-		};
-
-		etm@fc33d000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0xfc33d000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			cpu = <&CPU1>;
-
-			out-ports {
-				port {
-					etm1_out: endpoint {
-						remote-endpoint = <&kpss_in1>;
-					};
-				};
-			};
-		};
-
-		etm@fc33e000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0xfc33e000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			cpu = <&CPU2>;
-
-			out-ports {
-				port {
-					etm2_out: endpoint {
-						remote-endpoint = <&kpss_in2>;
-					};
-				};
-			};
-		};
-
-		etm@fc33f000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0xfc33f000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			cpu = <&CPU3>;
-
-			out-ports {
-				port {
-					etm3_out: endpoint {
-						remote-endpoint = <&kpss_in3>;
-					};
-				};
-			};
-		};
-
-		/* KPSS funnel, only 4 inputs are used */
-		funnel@fc345000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0xfc345000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					kpss_in0: endpoint {
-						remote-endpoint = <&etm0_out>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					kpss_in1: endpoint {
-						remote-endpoint = <&etm1_out>;
-					};
-				};
-				port@2 {
-					reg = <2>;
-					kpss_in2: endpoint {
-						remote-endpoint = <&etm2_out>;
-					};
-				};
-				port@3 {
-					reg = <3>;
-					kpss_in3: endpoint {
-						remote-endpoint = <&etm3_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					kpss_out: endpoint {
-						remote-endpoint = <&funnel1_in5>;
-					};
-				};
-			};
-		};
-
-		gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-msm8974";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfc400000 0x4000>;
-
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&sleep_clk>;
-			clock-names = "xo",
-				      "sleep_clk";
-		};
-
-		rpm_msg_ram: sram@fc428000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0xfc428000 0x4000>;
-		};
-
-		bimc: interconnect@fc380000 {
-			reg = <0xfc380000 0x6a000>;
-			compatible = "qcom,msm8974-bimc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
-		};
-
-		snoc: interconnect@fc460000 {
-			reg = <0xfc460000 0x4000>;
-			compatible = "qcom,msm8974-snoc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
-		};
-
-		pnoc: interconnect@fc468000 {
-			reg = <0xfc468000 0x4000>;
-			compatible = "qcom,msm8974-pnoc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
-		};
-
-		ocmemnoc: interconnect@fc470000 {
-			reg = <0xfc470000 0x4000>;
-			compatible = "qcom,msm8974-ocmemnoc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
-			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
-		};
-
-		mmssnoc: interconnect@fc478000 {
-			reg = <0xfc478000 0x4000>;
-			compatible = "qcom,msm8974-mmssnoc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&mmcc MMSS_S0_AXI_CLK>,
-			         <&mmcc MMSS_S0_AXI_CLK>;
-		};
-
-		cnoc: interconnect@fc480000 {
-			reg = <0xfc480000 0x4000>;
-			compatible = "qcom,msm8974-cnoc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
-		};
-
-		tsens: thermal-sensor@fc4a9000 {
-			compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
-			reg = <0xfc4a9000 0x1000>, /* TM */
-			      <0xfc4a8000 0x1000>; /* SROT */
-			nvmem-cells = <&tsens_mode>,
-				      <&tsens_base1>, <&tsens_base2>,
-				      <&tsens_use_backup>,
-				      <&tsens_mode_backup>,
-				      <&tsens_base1_backup>, <&tsens_base2_backup>,
-				      <&tsens_s0_p1>, <&tsens_s0_p2>,
-				      <&tsens_s1_p1>, <&tsens_s1_p2>,
-				      <&tsens_s2_p1>, <&tsens_s2_p2>,
-				      <&tsens_s3_p1>, <&tsens_s3_p2>,
-				      <&tsens_s4_p1>, <&tsens_s4_p2>,
-				      <&tsens_s5_p1>, <&tsens_s5_p2>,
-				      <&tsens_s6_p1>, <&tsens_s6_p2>,
-				      <&tsens_s7_p1>, <&tsens_s7_p2>,
-				      <&tsens_s8_p1>, <&tsens_s8_p2>,
-				      <&tsens_s9_p1>, <&tsens_s9_p2>,
-				      <&tsens_s10_p1>, <&tsens_s10_p2>,
-				      <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>,
-				      <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>,
-				      <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>,
-				      <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>,
-				      <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>,
-				      <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>,
-				      <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>,
-				      <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>,
-				      <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>,
-				      <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>,
-				      <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>;
-			nvmem-cell-names = "mode",
-					   "base1", "base2",
-					   "use_backup",
-					   "mode_backup",
-					   "base1_backup", "base2_backup",
-					   "s0_p1", "s0_p2",
-					   "s1_p1", "s1_p2",
-					   "s2_p1", "s2_p2",
-					   "s3_p1", "s3_p2",
-					   "s4_p1", "s4_p2",
-					   "s5_p1", "s5_p2",
-					   "s6_p1", "s6_p2",
-					   "s7_p1", "s7_p2",
-					   "s8_p1", "s8_p2",
-					   "s9_p1", "s9_p2",
-					   "s10_p1", "s10_p2",
-					   "s0_p1_backup", "s0_p2_backup",
-					   "s1_p1_backup", "s1_p2_backup",
-					   "s2_p1_backup", "s2_p2_backup",
-					   "s3_p1_backup", "s3_p2_backup",
-					   "s4_p1_backup", "s4_p2_backup",
-					   "s5_p1_backup", "s5_p2_backup",
-					   "s6_p1_backup", "s6_p2_backup",
-					   "s7_p1_backup", "s7_p2_backup",
-					   "s8_p1_backup", "s8_p2_backup",
-					   "s9_p1_backup", "s9_p2_backup",
-					   "s10_p1_backup", "s10_p2_backup";
-			#qcom,sensors = <11>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
-			#thermal-sensor-cells = <1>;
-		};
-
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
-
-		qfprom: qfprom@fc4bc000 {
-			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			tsens_base1: base1@d0 {
-				reg = <0xd0 0x1>;
-				bits = <0 8>;
-			};
-
-			tsens_s0_p1: s0-p1@d1 {
-				reg = <0xd1 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s1_p1: s1-p1@d2 {
-				reg = <0xd1 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s2_p1: s2-p1@d2 {
-				reg = <0xd2 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s3_p1: s3-p1@d3 {
-				reg = <0xd3 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_s4_p1: s4-p1@d4 {
-				reg = <0xd4 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s5_p1: s5-p1@d4 {
-				reg = <0xd4 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s6_p1: s6-p1@d5 {
-				reg = <0xd5 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s7_p1: s7-p1@d6 {
-				reg = <0xd6 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_s8_p1: s8-p1@d7 {
-				reg = <0xd7 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_mode: mode@d7 {
-				reg = <0xd7 0x1>;
-				bits = <6 2>;
-			};
-
-			tsens_s9_p1: s9-p1@d8 {
-				reg = <0xd8 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s10_p1: s10_p1@d8 {
-				reg = <0xd8 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_base2: base2@d9 {
-				reg = <0xd9 0x2>;
-				bits = <4 8>;
-			};
-
-			tsens_s0_p2: s0-p2@da {
-				reg = <0xda 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s1_p2: s1-p2@db {
-				reg = <0xdb 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_s2_p2: s2-p2@dc {
-				reg = <0xdc 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s3_p2: s3-p2@dc {
-				reg = <0xdc 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s4_p2: s4-p2@dd {
-				reg = <0xdd 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s5_p2: s5-p2@de {
-				reg = <0xde 0x2>;
-				bits = <2 6>;
-			};
-
-			tsens_s6_p2: s6-p2@df {
-				reg = <0xdf 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s7_p2: s7-p2@e0 {
-				reg = <0xe0 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s8_p2: s8-p2@e0 {
-				reg = <0xe0 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s9_p2: s9-p2@e1 {
-				reg = <0xe1 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s10_p2: s10_p2@e2 {
-				reg = <0xe2 0x2>;
-				bits = <2 6>;
-			};
-
-			tsens_s5_p2_backup: s5-p2_backup@e3 {
-				reg = <0xe3 0x2>;
-				bits = <0 6>;
-			};
-
-			tsens_mode_backup: mode_backup@e3 {
-				reg = <0xe3 0x1>;
-				bits = <6 2>;
-			};
-
-			tsens_s6_p2_backup: s6-p2_backup@e4 {
-				reg = <0xe4 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s7_p2_backup: s7-p2_backup@e4 {
-				reg = <0xe4 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s8_p2_backup: s8-p2_backup@e5 {
-				reg = <0xe5 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s9_p2_backup: s9-p2_backup@e6 {
-				reg = <0xe6 0x2>;
-				bits = <2 6>;
-			};
-
-			tsens_s10_p2_backup: s10_p2_backup@e7 {
-				reg = <0xe7 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_base1_backup: base1_backup@440 {
-				reg = <0x440 0x1>;
-				bits = <0 8>;
-			};
-
-			tsens_s0_p1_backup: s0-p1_backup@441 {
-				reg = <0x441 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s1_p1_backup: s1-p1_backup@442 {
-				reg = <0x441 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s2_p1_backup: s2-p1_backup@442 {
-				reg = <0x442 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s3_p1_backup: s3-p1_backup@443 {
-				reg = <0x443 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_s4_p1_backup: s4-p1_backup@444 {
-				reg = <0x444 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s5_p1_backup: s5-p1_backup@444 {
-				reg = <0x444 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s6_p1_backup: s6-p1_backup@445 {
-				reg = <0x445 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s7_p1_backup: s7-p1_backup@446 {
-				reg = <0x446 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_use_backup: use_backup@447 {
-				reg = <0x447 0x1>;
-				bits = <5 3>;
-			};
-
-			tsens_s8_p1_backup: s8-p1_backup@448 {
-				reg = <0x448 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s9_p1_backup: s9-p1_backup@448 {
-				reg = <0x448 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s10_p1_backup: s10_p1_backup@449 {
-				reg = <0x449 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_base2_backup: base2_backup@44a {
-				reg = <0x44a 0x2>;
-				bits = <2 8>;
-			};
-
-			tsens_s0_p2_backup: s0-p2_backup@44b {
-				reg = <0x44b 0x3>;
-				bits = <2 6>;
-			};
-
-			tsens_s1_p2_backup: s1-p2_backup@44c {
-				reg = <0x44c 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s2_p2_backup: s2-p2_backup@44c {
-				reg = <0x44c 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s3_p2_backup: s3-p2_backup@44d {
-				reg = <0x44d 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s4_p2_backup: s4-p2_backup@44e {
-				reg = <0x44e 0x1>;
-				bits = <2 6>;
-			};
-		};
-
-		spmi_bus: spmi@fc4cf000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg-names = "core", "intr", "cnfg";
-			reg = <0xfc4cf000 0x1000>,
-			      <0xfc4cb000 0x1000>,
-			      <0xfc4ca000 0x1000>;
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
-		bam_dmux_dma: dma-controller@fc834000 {
-			compatible = "qcom,bam-v1.4.0";
-			reg = <0xfc834000 0x7000>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-
-			num-channels = <6>;
-			qcom,num-ees = <1>;
-			qcom,powered-remotely;
-		};
-
-		remoteproc_mss: remoteproc@fc880000 {
-			compatible = "qcom,msm8974-mss-pil";
-			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
-			reg-names = "qdsp6", "rmb";
-
-			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
-				 <&gcc GCC_MSS_CFG_AHB_CLK>,
-				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "bus", "mem", "xo";
-
-			resets = <&gcc GCC_MSS_RESTART>;
-			reset-names = "mss_restart";
-
-			qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>;
-
-			qcom,smem-states = <&modem_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			mba {
-				memory-region = <&mba_region>;
-			};
-
-			mpss {
-				memory-region = <&mpss_region>;
-			};
-
-			bam_dmux: bam-dmux {
-				compatible = "qcom,bam-dmux";
-
-				interrupt-parent = <&modem_smsm>;
-				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
-				interrupt-names = "pc", "pc-ack";
-
-				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
-				qcom,smem-state-names = "pc", "pc-ack";
-
-				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
-				dma-names = "tx", "rx";
-			};
-
-			smd-edge {
-				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,ipc = <&apcs 8 12>;
-				qcom,smd-edge = <0>;
-
-				label = "modem";
-			};
-		};
-
-		tcsr_mutex: hwlock@fd484000 {
-			compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon";
-			reg = <0xfd484000 0x2000>;
-			#hwlock-cells = <1>;
-		};
-
-		tcsr: syscon@fd4a0000 {
-			compatible = "qcom,tcsr-msm8974", "syscon";
-			reg = <0xfd4a0000 0x10000>;
-		};
-
-		tlmm: pinctrl@fd510000 {
-			compatible = "qcom,msm8974-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 146>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-
-			sdc1_off: sdc1-off-state {
-				clk-pins {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				cmd-pins {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				data-pins {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-			};
-
-			sdc2_off: sdc2-off-state {
-				clk-pins {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				cmd-pins {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				data-pins {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				cd-pins {
-					pins = "gpio54";
-					function = "gpio";
-					bias-disable;
-					drive-strength = <2>;
-				};
-			};
-
-			blsp1_uart2_default: blsp1-uart2-default-state {
-				rx-pins {
-					pins = "gpio5";
-					function = "blsp_uart2";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-
-				tx-pins {
-					pins = "gpio4";
-					function = "blsp_uart2";
-					drive-strength = <4>;
-					bias-disable;
-				};
-			};
-
-			blsp2_uart1_default: blsp2-uart1-default-state {
-				tx-rts-pins {
-					pins = "gpio41", "gpio44";
-					function = "blsp_uart7";
-					drive-strength = <2>;
-					bias-disable;
-				};
-
-				rx-cts-pins {
-					pins = "gpio42", "gpio43";
-					function = "blsp_uart7";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			blsp2_uart1_sleep: blsp2-uart1-sleep-state {
-				pins = "gpio41", "gpio42", "gpio43", "gpio44";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			blsp2_uart4_default: blsp2-uart4-default-state {
-				tx-rts-pins {
-					pins = "gpio53", "gpio56";
-					function = "blsp_uart10";
-					drive-strength = <2>;
-					bias-disable;
-				};
-
-				rx-cts-pins {
-					pins = "gpio54", "gpio55";
-					function = "blsp_uart10";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			blsp1_i2c1_default: blsp1-i2c1-default-state {
-				pins = "gpio2", "gpio3";
-				function = "blsp_i2c1";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state {
-				pins = "gpio2", "gpio3";
-				function = "blsp_i2c1";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			blsp1_i2c2_default: blsp1-i2c2-default-state {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			blsp1_i2c3_default: blsp1-i2c3-default-state {
-				pins = "gpio10", "gpio11";
-				function = "blsp_i2c3";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
-				pins = "gpio10", "gpio11";
-				function = "blsp_i2c3";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			/* BLSP1_I2C4 info is missing */
-
-			/* BLSP1_I2C5 info is missing */
-
-			blsp1_i2c6_default: blsp1-i2c6-default-state {
-				pins = "gpio29", "gpio30";
-				function = "blsp_i2c6";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
-				pins = "gpio29", "gpio30";
-				function = "blsp_i2c6";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
-
-			/* BLSP2_I2C1 info is missing */
-
-			blsp2_i2c2_default: blsp2-i2c2-default-state {
-				pins = "gpio47", "gpio48";
-				function = "blsp_i2c8";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
-				pins = "gpio47", "gpio48";
-				function = "blsp_i2c8";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			/* BLSP2_I2C3 info is missing */
-
-			/* BLSP2_I2C4 info is missing */
-
-			blsp2_i2c5_default: blsp2-i2c5-default-state {
-				pins = "gpio83", "gpio84";
-				function = "blsp_i2c11";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
-				pins = "gpio83", "gpio84";
-				function = "blsp_i2c11";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			blsp2_i2c6_default: blsp2-i2c6-default-state {
-				pins = "gpio87", "gpio88";
-				function = "blsp_i2c12";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
-				pins = "gpio87", "gpio88";
-				function = "blsp_i2c12";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			cci_default: cci-default-state {
-				cci_i2c0_default: cci-i2c0-default-pins {
-					pins = "gpio19", "gpio20";
-					function = "cci_i2c0";
-					drive-strength = <2>;
-					bias-disable;
-				};
-
-				cci_i2c1_default: cci-i2c1-default-pins {
-					pins = "gpio21", "gpio22";
-					function = "cci_i2c1";
-					drive-strength = <2>;
-					bias-disable;
-				};
-			};
-
-			cci_sleep: cci-sleep-state {
-				cci_i2c0_sleep: cci-i2c0-sleep-pins {
-					pins = "gpio19", "gpio20";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-disable;
-				};
-
-				cci_i2c1_sleep: cci-i2c1-sleep-pins {
-					pins = "gpio21", "gpio22";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-disable;
-				};
-			};
-
-			spi8_default: spi8_default-state {
-				mosi-pins {
-					pins = "gpio45";
-					function = "blsp_spi8";
-				};
-				miso-pins {
-					pins = "gpio46";
-					function = "blsp_spi8";
-				};
-				cs-pins {
-					pins = "gpio47";
-					function = "blsp_spi8";
-				};
-				clk-pins {
-					pins = "gpio48";
-					function = "blsp_spi8";
-				};
-			};
-		};
-
-		mmcc: clock-controller@fd8c0000 {
-			compatible = "qcom,mmcc-msm8974";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfd8c0000 0x6000>;
-			clocks = <&xo_board>,
-				 <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
-				 <&gcc GPLL0_VOTE>,
-				 <&gcc GPLL1_VOTE>,
-				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <&dsi0_phy 1>,
-				 <&dsi0_phy 0>,
-				 <&dsi1_phy 1>,
-				 <&dsi1_phy 0>,
-				 <0>,
-				 <0>,
-				 <0>;
-			clock-names = "xo",
-				      "mmss_gpll0_vote",
-				      "gpll0_vote",
-				      "gpll1_vote",
-				      "gfx3d_clk_src",
-				      "dsi0pll",
-				      "dsi0pllbyte",
-				      "dsi1pll",
-				      "dsi1pllbyte",
-				      "hdmipll",
-				      "edp_link_clk",
-				      "edp_vco_div";
-		};
-
-		mdss: display-subsystem@fd900000 {
-			compatible = "qcom,mdss";
-			reg = <0xfd900000 0x100>, <0xfd924000 0x1000>;
-			reg-names = "mdss_phys", "vbif_phys";
-
-			power-domains = <&mmcc MDSS_GDSC>;
-
-			clocks = <&mmcc MDSS_AHB_CLK>,
-				 <&mmcc MDSS_AXI_CLK>,
-				 <&mmcc MDSS_VSYNC_CLK>;
-			clock-names = "iface", "bus", "vsync";
-
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			status = "disabled";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			mdp: display-controller@fd900000 {
-				compatible = "qcom,msm8974-mdp5", "qcom,mdp5";
-				reg = <0xfd900100 0x22000>;
-				reg-names = "mdp_phys";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <0>;
-
-				clocks = <&mmcc MDSS_AHB_CLK>,
-					 <&mmcc MDSS_AXI_CLK>,
-					 <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc MDSS_VSYNC_CLK>;
-				clock-names = "iface", "bus", "core", "vsync";
-
-				interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
-				interconnect-names = "mdp0-mem";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						mdp5_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
-						};
-					};
-
-					port@1 {
-						reg = <1>;
-						mdp5_intf2_out: endpoint {
-							remote-endpoint = <&dsi1_in>;
-						};
-					};
-				};
-			};
-
-			dsi0: dsi@fd922800 {
-				compatible = "qcom,msm8974-dsi-ctrl",
-					     "qcom,mdss-dsi-ctrl";
-				reg = <0xfd922800 0x1f8>;
-				reg-names = "dsi_ctrl";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <4>;
-
-				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
-
-				clocks = <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc MDSS_AHB_CLK>,
-					 <&mmcc MDSS_AXI_CLK>,
-					 <&mmcc MDSS_BYTE0_CLK>,
-					 <&mmcc MDSS_PCLK0_CLK>,
-					 <&mmcc MDSS_ESC0_CLK>,
-					 <&mmcc MMSS_MISC_AHB_CLK>;
-				clock-names = "mdp_core",
-					      "iface",
-					      "bus",
-					      "byte",
-					      "pixel",
-					      "core",
-					      "core_mmss";
-
-				phys = <&dsi0_phy>;
-
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						dsi0_in: endpoint {
-							remote-endpoint = <&mdp5_intf1_out>;
-						};
-					};
-
-					port@1 {
-						reg = <1>;
-						dsi0_out: endpoint {
-						};
-					};
-				};
-			};
-
-			dsi0_phy: phy@fd922a00 {
-				compatible = "qcom,dsi-phy-28nm-hpm";
-				reg = <0xfd922a00 0xd4>,
-				      <0xfd922b00 0x280>,
-				      <0xfd922d80 0x30>;
-				reg-names = "dsi_pll",
-					    "dsi_phy",
-					    "dsi_phy_regulator";
-
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-
-				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
-				clock-names = "iface", "ref";
-
-				status = "disabled";
-			};
-
-			dsi1: dsi@fd922e00 {
-				compatible = "qcom,msm8974-dsi-ctrl",
-					     "qcom,mdss-dsi-ctrl";
-				reg = <0xfd922e00 0x1f8>;
-				reg-names = "dsi_ctrl";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <4>;
-
-				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
-
-				clocks = <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc MDSS_AHB_CLK>,
-					 <&mmcc MDSS_AXI_CLK>,
-					 <&mmcc MDSS_BYTE1_CLK>,
-					 <&mmcc MDSS_PCLK1_CLK>,
-					 <&mmcc MDSS_ESC1_CLK>,
-					 <&mmcc MMSS_MISC_AHB_CLK>;
-				clock-names = "mdp_core",
-					      "iface",
-					      "bus",
-					      "byte",
-					      "pixel",
-					      "core",
-					      "core_mmss";
-
-				phys = <&dsi1_phy>;
-
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						dsi1_in: endpoint {
-							remote-endpoint = <&mdp5_intf2_out>;
-						};
-					};
-
-					port@1 {
-						reg = <1>;
-						dsi1_out: endpoint {
-						};
-					};
-				};
-			};
-
-			dsi1_phy: phy@fd923000 {
-				compatible = "qcom,dsi-phy-28nm-hpm";
-				reg = <0xfd923000 0xd4>,
-				      <0xfd923100 0x280>,
-				      <0xfd923380 0x30>;
-				reg-names = "dsi_pll",
-					    "dsi_phy",
-					    "dsi_phy_regulator";
-
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-
-				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
-				clock-names = "iface", "ref";
-
-				status = "disabled";
-			};
-		};
-
-		cci: cci@fda0c000 {
-			compatible = "qcom,msm8974-cci";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xfda0c000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
-				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
-				 <&mmcc CAMSS_CCI_CCI_CLK>;
-			clock-names = "camss_top_ahb",
-				      "cci_ahb",
-				      "cci";
-
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&cci_default>;
-			pinctrl-1 = <&cci_sleep>;
-
-			status = "disabled";
-
-			cci_i2c0: i2c-bus@0 {
-				reg = <0>;
-				clock-frequency = <100000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cci_i2c1: i2c-bus@1 {
-				reg = <1>;
-				clock-frequency = <100000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		gpu: adreno@fdb00000 {
-			compatible = "qcom,adreno-330.1", "qcom,adreno";
-			reg = <0xfdb00000 0x10000>;
-			reg-names = "kgsl_3d0_reg_memory";
-
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "kgsl_3d0_irq";
-
-			clocks = <&mmcc OXILI_GFX3D_CLK>,
-				 <&mmcc OXILICX_AHB_CLK>,
-				 <&mmcc OXILICX_AXI_CLK>;
-			clock-names = "core", "iface", "mem_iface";
-
-			sram = <&gmu_sram>;
-			power-domains = <&mmcc OXILICX_GDSC>;
-			operating-points-v2 = <&gpu_opp_table>;
-
-			interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
-					<&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
-			interconnect-names = "gfx-mem", "ocmem";
-
-			// iommus = <&gpu_iommu 0>;
-
-			status = "disabled";
-
-			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-320000000 {
-					opp-hz = /bits/ 64 <320000000>;
-				};
-
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
-				};
-
-				opp-27000000 {
-					opp-hz = /bits/ 64 <27000000>;
-				};
-			};
-		};
-
-		sram@fdd00000 {
-			compatible = "qcom,msm8974-ocmem";
-			reg = <0xfdd00000 0x2000>,
-			      <0xfec00000 0x180000>;
-			reg-names = "ctrl", "mem";
-			ranges = <0 0xfec00000 0x180000>;
-			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
-				 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
-			clock-names = "core", "iface";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			gmu_sram: gmu-sram@0 {
-				reg = <0x0 0x100000>;
-			};
-		};
-
-		remoteproc_adsp: remoteproc@fe200000 {
-			compatible = "qcom,msm8974-adsp-pil";
-			reg = <0xfe200000 0x100>;
-
-			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-					       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					       <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-			clocks = <&xo_board>;
-			clock-names = "xo";
-
-			memory-region = <&adsp_region>;
-
-			qcom,smem-states = <&adsp_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			smd-edge {
-				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,ipc = <&apcs 8 8>;
-				qcom,smd-edge = <1>;
-				label = "lpass";
-			};
-		};
-
-		imem: sram@fe805000 {
-			compatible = "qcom,msm8974-imem", "syscon", "simple-mfd";
-			reg = <0xfe805000 0x1000>;
-
-			reboot-mode {
-				compatible = "syscon-reboot-mode";
-				offset = <0x65c>;
-			};
-		};
-	};
-
-	thermal-zones {
-		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu_alert0: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit0: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 6>;
-
-			trips {
-				cpu_alert1: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit1: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 7>;
-
-			trips {
-				cpu_alert2: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit2: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 8>;
-
-			trips {
-				cpu_alert3: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit3: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		q6-dsp-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 1>;
-
-			trips {
-				q6_dsp_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		modemtx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 2>;
-
-			trips {
-				modemtx_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		video-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 3>;
-
-			trips {
-				video_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		wlan-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 4>;
-
-			trips {
-				wlan_alert0: trip-point0 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		gpu-top-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 9>;
-
-			trips {
-				gpu1_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		gpu-bottom-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 10>;
-
-			trips {
-				gpu2_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 2 0xf08>,
-			     <GIC_PPI 3 0xf08>,
-			     <GIC_PPI 4 0xf08>,
-			     <GIC_PPI 1 0xf08>;
-		clock-frequency = <19200000>;
-	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
-	};
-
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "vph-pwr";
-
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		regulator-always-on;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
deleted file mode 100644
index f531d2679f6c5..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
+++ /dev/null
@@ -1,463 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Fairphone 2";
-	compatible = "fairphone,fp2", "qcom,msm8974pro", "qcom,msm8974";
-	chassis-type = "handset";
-
-	aliases {
-		mmc0 = &sdhc_1;
-		mmc1 = &sdhc_2;
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		key-camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_CAMERA>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		key-volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		key-volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-	};
-
-	vibrator {
-		compatible = "gpio-vibrator";
-		enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
-		vcc-supply = <&pm8941_l18>;
-	};
-};
-
-&blsp1_i2c2 {
-	status = "okay";
-
-	touchscreen@41 {
-		compatible = "ilitek,ili2120";
-		reg = <0x41>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
-
-		touchscreen-size-x = <1080>;
-		touchscreen-size-y = <1920>;
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
-
-&imem {
-	reboot-mode {
-		mode-normal = <0x77665501>;
-		mode-bootloader = <0x77665500>;
-		mode-recovery = <0x77665502>;
-	};
-};
-
-&pm8941_gpios {
-	gpio_keys_pin_a: gpio-keys-active-state {
-		pins = "gpio1", "gpio2", "gpio5";
-		function = "normal";
-
-		bias-pull-up;
-		power-source = <PM8941_GPIO_S3>;
-	};
-};
-
-&pm8941_lpg {
-	status = "okay";
-
-	qcom,power-source = <1>;
-
-	multi-led {
-		color = <LED_COLOR_ID_RGB>;
-		function = LED_FUNCTION_STATUS;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@7 {
-			reg = <7>;
-			color = <LED_COLOR_ID_RED>;
-		};
-
-		led@6 {
-			reg = <6>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
-
-		led@5 {
-			reg = <5>;
-			color = <LED_COLOR_ID_BLUE>;
-		};
-	};
-};
-
-&pronto {
-	status = "okay";
-
-	vddmx-supply = <&pm8841_s1>;
-	vddcx-supply = <&pm8841_s2>;
-	vddpx-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&wcnss_pin_a>;
-
-	iris {
-		vddxo-supply = <&pm8941_l6>;
-		vddrfa-supply = <&pm8941_l11>;
-		vddpa-supply = <&pm8941_l19>;
-		vdddig-supply = <&pm8941_s3>;
-	};
-
-	smd-edge {
-		qcom,remote-pid = <4>;
-		label = "pronto";
-
-		wcnss {
-			status = "okay";
-		};
-	};
-};
-
-&remoteproc_adsp {
-	status = "okay";
-	cx-supply = <&pm8841_s2>;
-};
-
-&remoteproc_mss {
-	status = "okay";
-	cx-supply = <&pm8841_s2>;
-	mss-supply = <&pm8841_s3>;
-	mx-supply = <&pm8841_s1>;
-	pll-supply = <&pm8941_l12>;
-};
-
-&rpm_requests {
-	regulators-0 {
-		compatible = "qcom,rpm-pm8841-regulators";
-
-		pm8841_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s2: s2 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s3: s3 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,rpm-pm8941-regulators";
-
-		vdd_l1_l3-supply = <&pm8941_s1>;
-		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-		vdd_l4_l11-supply = <&pm8941_s1>;
-		vdd_l5_l7-supply = <&pm8941_s2>;
-		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-		vdd_l21-supply = <&vreg_boost>;
-
-		pm8941_s1: s1 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s2: s2 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-			regulator-boot-on;
-		};
-
-		pm8941_s3: s3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l3: l3 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l4: l4 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8941_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8941_l11: l11 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1350000>;
-		};
-
-		pm8941_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8941_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l17: l17 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l19: l19 {
-			regulator-min-microvolt = <2900000>;
-			regulator-max-microvolt = <3350000>;
-		};
-
-		pm8941_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-			regulator-boot-on;
-		};
-
-		pm8941_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pm8941_l23: l23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8941_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-			regulator-boot-on;
-		};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l20>;
-	vqmmc-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l21>;
-	vqmmc-supply = <&pm8941_l13>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-};
-
-&smbb {
-	usb-charge-current-limit = <1500000>;
-	qcom,fast-charge-safe-current = <1500000>;
-	qcom,fast-charge-current-limit = <1500000>;
-	qcom,fast-charge-safe-voltage = <4380000>;
-	qcom,fast-charge-high-threshold-voltage = <4350000>;
-	qcom,auto-recharge-threshold-voltage = <4240000>;
-	qcom,minimum-input-voltage = <4450000>;
-};
-
-&tlmm {
-	sdc1_on: sdc1-on-state {
-		clk-pins {
-			pins = "sdc1_clk";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	sdc2_on: sdc2-on-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			drive-strength = <10>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-	};
-
-	wcnss_pin_a: wcnss-pin-active-state {
-		wlan-pins {
-			pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
-			function = "wlan";
-
-			drive-strength = <6>;
-			bias-pull-down;
-		};
-
-		bt-pins {
-			pins = "gpio35", "gpio43", "gpio44";
-			function = "bt";
-
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		fm-pins {
-			pins = "gpio41", "gpio42";
-			function = "fm";
-
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-};
-
-&usb {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-};
-
-&usb_hs1_phy {
-	status = "okay";
-
-	v1p8-supply = <&pm8941_l6>;
-	v3p3-supply = <&pm8941_l24>;
-
-	extcon = <&smbb>;
-	qcom,init-seq = /bits/ 8 <0x1 0x64>;
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
deleted file mode 100644
index 8230d0e1d95d1..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
+++ /dev/null
@@ -1,512 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "OnePlus One";
-	compatible = "oneplus,bacon", "qcom,msm8974pro", "qcom,msm8974";
-	chassis-type = "handset";
-	qcom,msm-id = <194 0x10000>;
-	qcom,board-id = <8 0>;
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&gpio_keys_default>, <&gpio_hall_sensor_default>;
-		pinctrl-names = "default";
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		event-hall-sensor {
-			label = "Hall Effect Sensor";
-			gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			linux,can-disable;
-			debounce-interval = <150>;
-		};
-	};
-};
-
-&blsp1_i2c1 {
-	status = "okay";
-
-	fuel-gauge@55 {
-		compatible = "ti,bq27541";
-		reg = <0x55>;
-		power-supplies = <&bq24196_charger>;
-	};
-};
-
-&blsp1_i2c2 {
-	status = "okay";
-
-	rmi4-i2c-dev@20 {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x20>;
-
-		syna,startup-delay-ms = <100>;
-
-		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
-		vdd-supply = <&pm8941_l22>;
-		vio-supply = <&pm8941_lvs3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_default_state>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f12@12 {
-			reg = <0x12>;
-			syna,sensor-type = <1>;
-			/*
-			 * Touchscreen size is 2040x1080, y-values between
-			 * 1920-2040 are used for touchkey (menu, home & back).
-			 * For now clip it off so we don't get touch events
-			 * outside of the display area.
-			 */
-			syna,clip-y-high = <1920>;
-		};
-	};
-
-	led-controller@36 {
-		compatible = "ti,lm3630a";
-		reg = <0x36>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@0 {
-			reg = <0>;
-			led-sources = <0 1>;
-			label = "lcd-backlight";
-			default-brightness = <80>;
-		};
-	};
-
-	led-controller@68 {
-		compatible = "si-en,sn3193";
-		reg = <0x68>;
-
-		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@1 {
-			reg = <1>;
-			label = "red:status";
-			led-max-microamp = <17500>;
-		};
-
-		led@2 {
-			reg = <2>;
-			label = "green:status";
-			led-max-microamp = <17500>;
-		};
-
-		led@3 {
-			reg = <3>;
-			label = "blue:status";
-			led-max-microamp = <17500>;
-		};
-	};
-};
-
-&blsp1_i2c6 {
-	status = "okay";
-
-	bq24196_charger: charger@6b {
-		compatible = "ti,bq24196";
-		reg = <0x6b>;
-		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
-		omit-battery-class;
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
-
-&gcc {
-	compatible = "qcom,gcc-msm8974pro-ac";
-};
-
-&pm8941_coincell {
-	qcom,rset-ohms = <800>;
-	qcom,vset-millivolts = <3200>;
-
-	status = "okay";
-};
-
-&pm8941_gpios {
-	gpio_keys_default: gpio-keys-active-state {
-		pins = "gpio2", "gpio5";
-		function = "normal";
-		input-enable;
-		bias-disable;
-		power-source = <PM8941_GPIO_S3>;
-	};
-};
-
-&pm8941_vib {
-	status = "okay";
-};
-
-&pronto {
-	vddmx-supply = <&pm8841_s1>;
-	vddcx-supply = <&pm8841_s2>;
-	vddpx-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&wcnss_pin_a>;
-
-	status = "okay";
-
-	iris {
-		vddxo-supply = <&pm8941_l6>;
-		vddrfa-supply = <&pm8941_l11>;
-		vddpa-supply = <&pm8941_l19>;
-		vdddig-supply = <&pm8941_s3>;
-	};
-
-	smd-edge {
-		qcom,remote-pid = <4>;
-		label = "pronto";
-
-		wcnss {
-			status = "okay";
-		};
-	};
-};
-
-&remoteproc_adsp {
-	cx-supply = <&pm8841_s2>;
-
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators-0 {
-		compatible = "qcom,rpm-pm8841-regulators";
-
-		pm8841_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s2: s2 {
-			regulator-min-microvolt = <875000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-		};
-
-		pm8841_s3: s3 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,rpm-pm8941-regulators";
-
-		vdd_l1_l3-supply = <&pm8941_s1>;
-		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-		vdd_l4_l11-supply = <&pm8941_s1>;
-		vdd_l5_l7-supply = <&pm8941_s2>;
-		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
-		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-		vdd_l21-supply = <&vreg_boost>;
-
-		pm8941_s1: s1 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s2: s2 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-
-			regulator-boot-on;
-		};
-
-		pm8941_s3: s3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-system-load = <154000>;
-
-			regulator-always-on;
-			regulator-boot-on;
-			regulator-allow-set-load;
-		};
-
-		pm8941_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l3: l3 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l4: l4 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-
-			regulator-boot-on;
-		};
-
-		pm8941_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-
-			regulator-boot-on;
-		};
-
-		pm8941_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8941_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8941_l11: l11 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1350000>;
-		};
-
-		pm8941_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-
-			regulator-always-on;
-			regulator-boot-on;
-			regulator-allow-set-load;
-		};
-
-		pm8941_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-
-			regulator-boot-on;
-		};
-
-		pm8941_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8941_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l17: l17 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l19: l19 {
-			regulator-min-microvolt = <2900000>;
-			regulator-max-microvolt = <3350000>;
-		};
-
-		pm8941_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-			regulator-boot-on;
-		};
-
-		pm8941_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-
-			regulator-boot-on;
-		};
-
-		pm8941_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-allow-set-load;
-		};
-
-		pm8941_l23: l23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8941_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-
-			regulator-boot-on;
-		};
-
-		pm8941_lvs3: lvs3 {};
-	};
-};
-
-&sdhc_1 {
-	vmmc-supply = <&pm8941_l20>;
-	vqmmc-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-
-	status = "okay";
-};
-
-&tlmm {
-	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
-		pins = "gpio68";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	sdc1_on: sdc1-on-state {
-		clk-pins {
-			pins = "sdc1_clk";
-			drive-strength = <4>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <4>;
-			bias-pull-up;
-		};
-	};
-
-	touch_default_state: touch-default-state {
-		int-pins {
-			pins = "gpio61";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		reset-pins {
-			pins = "gpio60";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	wcnss_pin_a: wcnss-pin-active-state {
-		wlan-pins {
-			pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
-			function = "wlan";
-			drive-strength = <6>;
-			bias-pull-down;
-		};
-
-		bt-pins {
-			pins = "gpio35", "gpio43", "gpio44";
-			function = "bt";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-};
-
-&usb {
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	status = "okay";
-};
-
-&usb_hs1_phy {
-	status = "okay";
-
-	v1p8-supply = <&pm8941_l6>;
-	v3p3-supply = <&pm8941_l24>;
-
-	extcon = <&smbb>;
-	qcom,init-seq = /bits/ 8 <0x1 0x64>;
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
deleted file mode 100644
index eb505d6d7f31f..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
+++ /dev/null
@@ -1,810 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Samsung Galaxy S5";
-	compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
-	chassis-type = "handset";
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
-		mmc1 = &sdhc_3; /* SDC2 SD card slot */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		key-volume-down {
-			label = "volume_down";
-			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <15>;
-		};
-
-		key-home {
-			label = "home_key";
-			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_HOMEPAGE>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		key-volume-up {
-			label = "volume_up";
-			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <15>;
-		};
-	};
-
-	i2c-gpio-touchkey {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_touchkey_pins>;
-
-		touchkey@20 {
-			compatible = "cypress,tm2-touchkey";
-			reg = <0x20>;
-
-			interrupt-parent = <&pma8084_gpios>;
-			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&touchkey_pin>;
-
-			vcc-supply = <&max77826_ldo15>;
-			vdd-supply = <&pma8084_l19>;
-
-			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
-		};
-	};
-
-	i2c-gpio-led {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_led_gpioex_pins>;
-
-		i2c-gpio,delay-us = <2>;
-
-		gpio_expander: gpio@20 {
-			compatible = "nxp,pcal6416";
-			reg = <0x20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			vcc-supply = <&pma8084_s4>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpioex_pin>;
-
-			reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
-		};
-
-		led-controller@30 {
-			compatible = "panasonic,an30259a";
-			reg = <0x30>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			led@1 {
-				reg = <1>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@2 {
-				reg = <2>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@3 {
-				reg = <3>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-		};
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vreg_panel: panel-regulator {
-		compatible = "regulator-fixed";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_en_pin>;
-
-		regulator-name = "panel-vddr-reg";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-
-		gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	/delete-node/ vreg-boost;
-};
-
-&blsp1_i2c2 {
-	status = "okay";
-
-	touchscreen@20 {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x20>;
-
-		interrupt-parent = <&pma8084_gpios>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		vdd-supply = <&max77826_ldo13>;
-		vio-supply = <&pma8084_lvs2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_pin>;
-
-		syna,startup-delay-ms = <100>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f12@12 {
-			reg = <0x12>;
-			syna,sensor-type = <1>;
-		};
-	};
-};
-
-&blsp1_i2c6 {
-	status = "okay";
-
-	pmic@60 {
-		reg = <0x60>;
-		compatible = "maxim,max77826";
-
-		regulators {
-			max77826_ldo1: LDO1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			max77826_ldo2: LDO2 {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			max77826_ldo3: LDO3 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			max77826_ldo4: LDO4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo5: LDO5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo6: LDO6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo7: LDO7 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo8: LDO8 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo9: LDO9 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo10: LDO10 {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2950000>;
-			};
-
-			max77826_ldo11: LDO11 {
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2950000>;
-			};
-
-			max77826_ldo12: LDO12 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo13: LDO13 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo14: LDO14 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo15: LDO15 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_buck: BUCK {
-				regulator-min-microvolt = <1225000>;
-				regulator-max-microvolt = <1225000>;
-			};
-
-			max77826_buckboost: BUCKBOOST {
-				regulator-min-microvolt = <3400000>;
-				regulator-max-microvolt = <3400000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
-
-&blsp2_i2c6 {
-	status = "okay";
-
-	fuelgauge@36 {
-		compatible = "maxim,max17048";
-		reg = <0x36>;
-
-		maxim,double-soc;
-		maxim,rcomp = /bits/ 8 <0x56>;
-
-		interrupt-parent = <&pma8084_gpios>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&fuelgauge_pin>;
-	};
-};
-
-&blsp2_uart2 {
-	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp2_uart2_pins_active>;
-	pinctrl-1 = <&blsp2_uart2_pins_sleep>;
-
-	bluetooth {
-		compatible = "brcm,bcm43540-bt";
-		max-speed = <3000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_pins>;
-		device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wakeup";
-	};
-};
-
-&dsi0 {
-	status = "okay";
-
-	vdda-supply = <&pma8084_l2>;
-	vdd-supply = <&pma8084_l22>;
-	vddio-supply = <&pma8084_l12>;
-
-	panel: panel@0 {
-		reg = <0>;
-		compatible = "samsung,s6e3fa2";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
-
-		iovdd-supply = <&pma8084_lvs4>;
-		vddr-supply = <&vreg_panel>;
-
-		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
-		te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
-			};
-		};
-	};
-};
-
-&dsi0_out {
-	remote-endpoint = <&panel_in>;
-	data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
-	status = "okay";
-
-	vddio-supply = <&pma8084_l12>;
-};
-
-&gpu {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
-&pma8084_gpios {
-	gpio_keys_pin_a: gpio-keys-active-state {
-		pins = "gpio2", "gpio3", "gpio5";
-		function = "normal";
-
-		bias-pull-up;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-
-	touchkey_pin: touchkey-int-state {
-		pins = "gpio6";
-		function = "normal";
-		bias-disable;
-		input-enable;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-
-	touch_pin: touchscreen-int-state {
-		pins = "gpio8";
-		function = "normal";
-		bias-disable;
-		input-enable;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-
-	panel_en_pin: panel-en-state {
-		pins = "gpio14";
-		function = "normal";
-		bias-pull-up;
-		power-source = <PMA8084_GPIO_S4>;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-	};
-
-	wlan_sleep_clk_pin: wlan-sleep-clk-state {
-		pins = "gpio16";
-		function = "func2";
-
-		output-high;
-		power-source = <PMA8084_GPIO_S4>;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
-	};
-
-	panel_rst_pin: panel-rst-state {
-		pins = "gpio17";
-		function = "normal";
-		bias-disable;
-		power-source = <PMA8084_GPIO_S4>;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-	};
-
-	fuelgauge_pin: fuelgauge-int-state {
-		pins = "gpio21";
-		function = "normal";
-		bias-disable;
-		input-enable;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-};
-
-&remoteproc_adsp {
-	status = "okay";
-	cx-supply = <&pma8084_s2>;
-};
-
-&remoteproc_mss {
-	status = "okay";
-	cx-supply = <&pma8084_s2>;
-	mss-supply = <&pma8084_s6>;
-	mx-supply = <&pma8084_s1>;
-	pll-supply = <&pma8084_l12>;
-};
-
-&rpm_requests {
-	regulators-0 {
-		compatible = "qcom,rpm-pma8084-regulators";
-
-		pma8084_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-		};
-
-		pma8084_s2: s2 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pma8084_s3: s3 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pma8084_s4: s4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_s5: s5 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-		};
-
-		pma8084_s6: s6 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pma8084_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pma8084_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pma8084_l3: l3 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pma8084_l4: l4 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pma8084_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pma8084_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pma8084_l11: l11 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pma8084_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		pma8084_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pma8084_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pma8084_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pma8084_l17: l17 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pma8084_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pma8084_l19: l19 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pma8084_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-		};
-
-		pma8084_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-		};
-
-		pma8084_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pma8084_l23: l23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pma8084_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-
-		pma8084_l25: l25 {
-			regulator-min-microvolt = <2100000>;
-			regulator-max-microvolt = <2100000>;
-		};
-
-		pma8084_l26: l26 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pma8084_l27: l27 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pma8084_lvs1: lvs1 {};
-		pma8084_lvs2: lvs2 {};
-		pma8084_lvs3: lvs3 {};
-		pma8084_lvs4: lvs4 {};
-
-		pma8084_5vs1: 5vs1 {};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pma8084_l20>;
-	vqmmc-supply = <&pma8084_s4>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-	max-frequency = <100000000>;
-	vmmc-supply = <&vreg_wlan>;
-	vqmmc-supply = <&pma8084_s4>;
-	non-removable;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-
-	wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
-	};
-};
-
-&sdhc_3 {
-	status = "okay";
-	max-frequency = <100000000>;
-	vmmc-supply = <&pma8084_l21>;
-	vqmmc-supply = <&pma8084_l13>;
-
-	/*
-	 * cd-gpio is intentionally disabled. If enabled, an SD card
-	 * present during boot is not initialized correctly. Without
-	 * cd-gpios the driver resorts to polling, so hotplug works.
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
-	/* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
-};
-
-&tlmm {
-	/* This seems suspicious, but somebody with this device should look into it. */
-	blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "blsp_uart8";
-		drive-strength = <8>;
-		bias-disable;
-	};
-
-	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	bt_pins: bt-pins-state {
-		hostwake-pins {
-			pins = "gpio75";
-			function = "gpio";
-			drive-strength = <16>;
-		};
-
-		devwake-pins {
-			pins = "gpio91";
-			function = "gpio";
-			drive-strength = <2>;
-		};
-	};
-
-	sdc1_on: sdhc1-on-state {
-		clk-pins {
-			pins = "sdc1_clk";
-			drive-strength = <4>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <4>;
-			bias-pull-up;
-		};
-	};
-
-	sdc3_on: sdc3-on-state {
-		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
-		function = "sdc3";
-		drive-strength = <8>;
-		bias-disable;
-	};
-
-	sdhc3_cd_pin: sdc3-cd-on-state {
-		pins = "gpio62";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	sdc2_on: sdhc2-on-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			drive-strength = <6>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-	};
-
-	i2c_touchkey_pins: i2c-touchkey-state {
-		pins = "gpio95", "gpio96";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	i2c_led_gpioex_pins: i2c-led-gpioex-state {
-		pins = "gpio120", "gpio121";
-		function = "gpio";
-		bias-pull-down;
-	};
-
-	gpioex_pin: gpioex-state {
-		pins = "gpio145";
-		function = "gpio";
-		bias-pull-up;
-		drive-strength = <2>;
-	};
-
-	wifi_pin: wifi-state {
-		pins = "gpio92";
-		function = "gpio";
-		bias-pull-down;
-	};
-
-	panel_te_pin: panel-state {
-		pins = "gpio12";
-		function = "mdp_vsync";
-		drive-strength = <2>;
-		bias-disable;
-	};
-};
-
-&usb {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-};
-
-&usb_hs1_phy {
-	status = "okay";
-
-	v1p8-supply = <&pma8084_l6>;
-	v3p3-supply = <&pma8084_l24>;
-
-	qcom,init-seq = /bits/ 8 <0x1 0x64>;
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
deleted file mode 100644
index 0f650ed310052..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ /dev/null
@@ -1,673 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Sony Xperia Z2 Tablet";
-	compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
-	chassis-type = "tablet";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-		serial1 = &blsp2_uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		key-volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		key-camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		key-camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		key-volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	vreg_bl_vddio: lcd-backlight-vddio {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bl_vddio";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		gpio = <&tlmm 69 0>;
-		enable-active-high;
-
-		vin-supply = <&pm8941_s3>;
-		startup-delay-us = <70000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_backlight_en_pin_a>;
-	};
-
-	vreg_vsp: lcd-dcdc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_vsp";
-		regulator-min-microvolt = <5600000>;
-		regulator-max-microvolt = <5600000>;
-
-		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_regulator_pin>;
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
-
-&blsp2_i2c2 {
-	status = "okay";
-	clock-frequency = <355000>;
-
-	synaptics@2c {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x2c>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd-supply = <&pm8941_l22>;
-		vio-supply = <&pm8941_lvs3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_pin>;
-
-		syna,startup-delay-ms = <100>;
-
-		rmi-f01@1 {
-			reg = <0x1>;
-			syna,nosleep = <1>;
-		};
-
-		rmi-f11@11 {
-			reg = <0x11>;
-			syna,f11-flip-x = <1>;
-			syna,sensor-type = <1>;
-		};
-	};
-};
-
-&blsp2_i2c5 {
-	status = "okay";
-	clock-frequency = <355000>;
-
-	lp8566_wled: backlight@2c {
-		compatible = "ti,lp8556";
-		reg = <0x2c>;
-		power-supply = <&vreg_bl_vddio>;
-
-		bl-name = "backlight";
-		dev-ctrl = /bits/ 8 <0x05>;
-		init-brt = /bits/ 8 <0x3f>;
-		rom_a0h {
-			rom-addr = /bits/ 8 <0xa0>;
-			rom-val = /bits/ 8 <0xff>;
-		};
-		rom_a1h {
-			rom-addr = /bits/ 8 <0xa1>;
-			rom-val = /bits/ 8 <0x3f>;
-		};
-		rom_a2h {
-			rom-addr = /bits/ 8 <0xa2>;
-			rom-val = /bits/ 8 <0x20>;
-		};
-		rom_a3h {
-			rom-addr = /bits/ 8 <0xa3>;
-			rom-val = /bits/ 8 <0x5e>;
-		};
-		rom_a4h {
-			rom-addr = /bits/ 8 <0xa4>;
-			rom-val = /bits/ 8 <0x02>;
-		};
-		rom_a5h {
-			rom-addr = /bits/ 8 <0xa5>;
-			rom-val = /bits/ 8 <0x04>;
-		};
-		rom_a6h {
-			rom-addr = /bits/ 8 <0xa6>;
-			rom-val = /bits/ 8 <0x80>;
-		};
-		rom_a7h {
-			rom-addr = /bits/ 8 <0xa7>;
-			rom-val = /bits/ 8 <0xf7>;
-		};
-		rom_a9h {
-			rom-addr = /bits/ 8 <0xa9>;
-			rom-val = /bits/ 8 <0x80>;
-		};
-		rom_aah {
-			rom-addr = /bits/ 8 <0xaa>;
-			rom-val = /bits/ 8 <0x0f>;
-		};
-		rom_aeh {
-			rom-addr = /bits/ 8 <0xae>;
-			rom-val = /bits/ 8 <0x0f>;
-		};
-	};
-};
-
-&blsp2_uart1 {
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <3000000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
-
-		host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&pm8941_coincell {
-	status = "okay";
-
-	qcom,rset-ohms = <2100>;
-	qcom,vset-millivolts = <3000>;
-};
-
-&pm8941_gpios {
-	gpio_keys_pin_a: gpio-keys-active-state {
-		pins = "gpio2", "gpio5";
-		function = "normal";
-
-		bias-pull-up;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	bt_reg_on_pin: bt-reg-on-state {
-		pins = "gpio16";
-		function = "normal";
-
-		output-low;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	wlan_sleep_clk_pin: wl-sleep-clk-state {
-		pins = "gpio17";
-		function = "func2";
-
-		output-high;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	wlan_regulator_pin: wl-reg-active-state {
-		pins = "gpio18";
-		function = "normal";
-
-		bias-disable;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
-		pins = "gpio20";
-		function = "normal";
-
-		bias-disable;
-		power-source = <PM8941_GPIO_S3>;
-		input-disable;
-		output-low;
-	};
-
-};
-
-&pm8941_lpg {
-	status = "okay";
-
-	qcom,power-source = <1>;
-
-	multi-led {
-		color = <LED_COLOR_ID_RGB>;
-		function = LED_FUNCTION_STATUS;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@5 {
-			reg = <5>;
-			color = <LED_COLOR_ID_BLUE>;
-		};
-
-		led@6 {
-			reg = <6>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
-
-		led@7 {
-			reg = <7>;
-			color = <LED_COLOR_ID_RED>;
-		};
-	};
-};
-
-&remoteproc_adsp {
-	cx-supply = <&pm8841_s2>;
-};
-
-&remoteproc_mss {
-	cx-supply = <&pm8841_s2>;
-	mss-supply = <&pm8841_s3>;
-	mx-supply = <&pm8841_s1>;
-	pll-supply = <&pm8941_l12>;
-};
-
-&rpm_requests {
-	regulators-0 {
-		compatible = "qcom,rpm-pm8841-regulators";
-
-		pm8841_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s2: s2 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s3: s3 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s4: s4 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,rpm-pm8941-regulators";
-
-		vdd_l1_l3-supply = <&pm8941_s1>;
-		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-		vdd_l4_l11-supply = <&pm8941_s1>;
-		vdd_l5_l7-supply = <&pm8941_s2>;
-		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-		vdd_l21-supply = <&vreg_boost>;
-
-		pm8941_s1: s1 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s2: s2 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-			regulator-boot-on;
-		};
-
-		pm8941_s3: s3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-system-load = <154000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s4: s4 {
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		pm8941_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l3: l3 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l4: l4 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8941_l11: l11 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1350000>;
-		};
-
-		pm8941_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8941_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l17: l17 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l19: l19 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <500000>;
-			regulator-allow-set-load;
-			regulator-boot-on;
-		};
-
-		pm8941_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8941_l23: l23 {
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-
-		pm8941_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-			regulator-boot-on;
-		};
-
-		pm8941_lvs3: lvs3 {};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l20>;
-	vqmmc-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l21>;
-	vqmmc-supply = <&pm8941_l13>;
-
-	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-};
-
-&sdhc_3 {
-	status = "okay";
-
-	max-frequency = <100000000>;
-	vmmc-supply = <&vreg_wlan>;
-	non-removable;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc3_on>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	bcrmf@1 {
-		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
-		reg = <1>;
-
-		brcm,drive-strength = <10>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_sleep_clk_pin>;
-	};
-};
-
-&smbb {
-	qcom,fast-charge-safe-current = <1500000>;
-	qcom,fast-charge-current-limit = <1500000>;
-	qcom,dc-current-limit = <1800000>;
-	usb-charge-current-limit = <1800000>;
-	qcom,fast-charge-safe-voltage = <4400000>;
-	qcom,fast-charge-high-threshold-voltage = <4350000>;
-	qcom,fast-charge-low-threshold-voltage = <3400000>;
-	qcom,auto-recharge-threshold-voltage = <4200000>;
-	qcom,minimum-input-voltage = <4300000>;
-};
-
-&tlmm {
-	lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
-		pins = "gpio69";
-		function = "gpio";
-		drive-strength = <10>;
-		output-low;
-		bias-disable;
-	};
-
-	sdc1_on: sdc1-on-state {
-		clk-pins {
-			pins = "sdc1_clk";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	sdc2_on: sdc2-on-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			drive-strength = <6>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-
-		cd-pins {
-			pins = "gpio62";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	sdc3_on: sdc3-on-state {
-		clk-pins {
-			pins = "gpio40";
-			function = "sdc3";
-			drive-strength = <10>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio39";
-			function = "sdc3";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio35", "gpio36", "gpio37", "gpio38";
-			function = "sdc3";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	ts_int_pin: ts-int-pin-state {
-		pins = "gpio86";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	bt_host_wake_pin: bt-host-wake-state {
-		pins = "gpio95";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		output-low;
-	};
-
-	bt_dev_wake_pin: bt-dev-wake-state {
-		pins = "gpio96";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-};
-
-&usb {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-};
-
-&usb_hs1_phy {
-	status = "okay";
-
-	v1p8-supply = <&pm8941_l6>;
-	v3p3-supply = <&pm8941_l24>;
-
-	extcon = <&smbb>;
-	qcom,init-seq = /bits/ 8 <0x1 0x64>;
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
deleted file mode 100644
index 58df6e75ab6da..0000000000000
--- a/arch/arm/boot/dts/qcom-msm8974pro.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-
-&gcc {
-	compatible = "qcom,gcc-msm8974pro";
-};
-
-&gpu {
-	compatible = "qcom,adreno-330.2", "qcom,adreno";
-};
-
-&sdhc_1 {
-	clocks = <&gcc GCC_SDCC1_AHB_CLK>,
-		 <&gcc GCC_SDCC1_APPS_CLK>,
-		 <&xo_board>,
-		 <&gcc GCC_SDCC1_CDCCAL_FF_CLK>,
-		 <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>;
-	clock-names = "iface", "core", "xo", "cal", "sleep";
-};
diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi
deleted file mode 100644
index 46ba84f86c9f1..0000000000000
--- a/arch/arm/boot/dts/qcom-pm8226.dtsi
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-	pm8226_0: pm8226@0 {
-		compatible = "qcom,pm8226", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pon@800 {
-			compatible = "qcom,pm8916-pon";
-			reg = <0x800>;
-
-			pwrkey {
-				compatible = "qcom,pm8941-pwrkey";
-				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				linux,code = <KEY_POWER>;
-			};
-
-			pm8226_resin: resin {
-				compatible = "qcom,pm8941-resin";
-				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				status = "disabled";
-			};
-		};
-
-		smbb: charger@1000 {
-			compatible = "qcom,pm8226-charger";
-			reg = <0x1000>;
-			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "chg-done",
-					  "chg-fast",
-					  "chg-trkl",
-					  "bat-temp-ok",
-					  "bat-present",
-					  "chg-gone",
-					  "usb-valid",
-					  "dc-valid";
-
-			chg_otg: otg-vbus { };
-		};
-
-		pm8226_vadc: adc@3100 {
-			compatible = "qcom,spmi-vadc";
-			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-
-			adc-chan@7 {
-				reg = <VADC_VSYS>;
-				qcom,pre-scaling = <1 3>;
-				label = "vph_pwr";
-			};
-			adc-chan@8 {
-				reg = <VADC_DIE_TEMP>;
-				label = "die_temp";
-			};
-			adc-chan@9 {
-				reg = <VADC_REF_625MV>;
-				label = "ref_625mv";
-			};
-			adc-chan@a {
-				reg = <VADC_REF_1250MV>;
-				label = "ref_1250mv";
-			};
-			adc-chan@e {
-				reg = <VADC_GND_REF>;
-			};
-			adc-chan@f {
-				reg = <VADC_VDD_VADC>;
-			};
-		};
-
-		pm8226_iadc: adc@3600 {
-			compatible = "qcom,pm8226-iadc", "qcom,spmi-iadc";
-			reg = <0x3600>;
-			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		rtc@6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>, <0x6100>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		pm8226_mpps: mpps@a000 {
-			compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pm8226_mpps 0 0 8>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pm8226_gpios: gpio@c000 {
-			compatible = "qcom,pm8226-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pm8226_gpios 0 0 8>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pm8226_1: pm8226@1 {
-		compatible = "qcom,pm8226", "qcom,spmi-pmic";
-		reg = <0x1 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8226_spmi_regulators: regulators {
-			compatible = "qcom,pm8226-regulators";
-		};
-
-		pm8226_vib: vibrator@c000 {
-			compatible = "qcom,pm8916-vib";
-			reg = <0xc000>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi
deleted file mode 100644
index b5cdde034d188..0000000000000
--- a/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-
-	pm8841_0: pm8841@4 {
-		compatible = "qcom,pm8841", "qcom,spmi-pmic";
-		reg = <0x4 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8841_mpps: mpps@a000 {
-			compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pm8841_mpps 0 0 4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		temp-alarm@2400 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400>;
-			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
-			#thermal-sensor-cells = <0>;
-		};
-	};
-
-	pm8841_1: pm8841@5 {
-		compatible = "qcom,pm8841", "qcom,spmi-pmic";
-		reg = <0x5 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
deleted file mode 100644
index a821f0368a289..0000000000000
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ /dev/null
@@ -1,211 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-
-	pm8941_0: pm8941@0 {
-		compatible = "qcom,pm8941", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc@6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>,
-			      <0x6100>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		pwrkey@800 {
-			compatible = "qcom,pm8941-pwrkey";
-			reg = <0x800>;
-			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
-		};
-
-		usb_id: usb-detect@900 {
-			compatible = "qcom,pm8941-misc";
-			reg = <0x900>;
-			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "usb_id";
-		};
-
-		smbb: charger@1000 {
-			compatible = "qcom,pm8941-charger";
-			reg = <0x1000>;
-			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "chg-done",
-					  "chg-fast",
-					  "chg-trkl",
-					  "bat-temp-ok",
-					  "bat-present",
-					  "chg-gone",
-					  "usb-valid",
-					  "dc-valid";
-
-			usb-otg-in-supply = <&pm8941_5vs1>;
-
-			chg_otg: otg-vbus { };
-		};
-
-		pm8941_gpios: gpio@c000 {
-			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pm8941_gpios 0 0 36>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			boost_bypass_n_pin: boost-bypass-state {
-				pins = "gpio21";
-				function = "normal";
-			};
-		};
-
-		pm8941_mpps: mpps@a000 {
-			compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pm8941_mpps 0 0 8>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pm8941_temp: temp-alarm@2400 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400>;
-			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
-			io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
-			io-channel-names = "thermal";
-			#thermal-sensor-cells = <0>;
-		};
-
-		pm8941_vadc: adc@3100 {
-			compatible = "qcom,spmi-vadc";
-			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-
-
-			adc-chan@6 {
-				reg = <VADC_VBAT_SNS>;
-			};
-
-			adc-chan@8 {
-				reg = <VADC_DIE_TEMP>;
-			};
-
-			adc-chan@9 {
-				reg = <VADC_REF_625MV>;
-			};
-
-			adc-chan@a {
-				reg = <VADC_REF_1250MV>;
-			};
-
-			adc-chan@e {
-				reg = <VADC_GND_REF>;
-			};
-
-			adc-chan@f {
-				reg = <VADC_VDD_VADC>;
-			};
-
-			adc-chan@30 {
-				reg = <VADC_LR_MUX1_BAT_THERM>;
-			};
-		};
-
-		pm8941_iadc: adc@3600 {
-			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
-			reg = <0x3600>;
-			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
-			qcom,external-resistor-micro-ohms = <10000>;
-		};
-
-		pm8941_coincell: charger@2800 {
-			compatible = "qcom,pm8941-coincell";
-			reg = <0x2800>;
-			status = "disabled";
-		};
-	};
-
-	pm8941_1: pm8941@1 {
-		compatible = "qcom,pm8941", "qcom,spmi-pmic";
-		reg = <0x1 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8941_lpg: pwm {
-			compatible = "qcom,pm8941-lpg";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pwm-cells = <2>;
-
-			status = "disabled";
-		};
-
-		pm8941_vib: vibrator@c000 {
-			compatible = "qcom,pm8916-vib";
-			reg = <0xc000>;
-			status = "disabled";
-		};
-
-		pm8941_wled: wled@d800 {
-			compatible = "qcom,pm8941-wled";
-			reg = <0xd800>;
-			label = "backlight";
-
-			status = "disabled";
-		};
-
-		regulators {
-			compatible = "qcom,pm8941-regulators";
-			interrupts = <0x1 0x83 0x2 0>, <0x1 0x84 0x2 0>;
-			interrupt-names = "ocp-5vs1", "ocp-5vs2";
-			vin_5vs-supply = <&pm8941_5v>;
-
-			pm8941_5v: s4 {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5000000>;
-				regulator-enable-ramp-delay = <500>;
-			};
-
-			pm8941_5vs1: 5vs1 {
-				regulator-enable-ramp-delay = <1000>;
-				regulator-pull-down;
-				regulator-over-current-protection;
-				qcom,ocp-max-retries = <10>;
-				qcom,ocp-retry-delay = <30>;
-				qcom,vs-soft-start-strength = <0>;
-				regulator-initial-mode = <1>;
-			};
-
-			pm8941_5vs2: 5vs2 {
-				regulator-enable-ramp-delay = <1000>;
-				regulator-pull-down;
-				regulator-over-current-protection;
-				qcom,ocp-max-retries = <10>;
-				qcom,ocp-retry-delay = <30>;
-				qcom,vs-soft-start-strength = <0>;
-				regulator-initial-mode = <1>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
deleted file mode 100644
index 2dd4c6aa71c9e..0000000000000
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ /dev/null
@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-
-	pma8084_0: pma8084@0 {
-		compatible = "qcom,pma8084", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc@6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>,
-			      <0x6100>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		pwrkey@800 {
-			compatible = "qcom,pm8941-pwrkey";
-			reg = <0x800>;
-			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
-		};
-
-		pma8084_gpios: gpio@c000 {
-			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pma8084_gpios 0 0 22>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pma8084_mpps: mpps@a000 {
-			compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pma8084_mpps 0 0 8>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pma8084_temp: temp-alarm@2400 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400>;
-			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
-			#thermal-sensor-cells = <0>;
-			io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
-			io-channel-names = "thermal";
-		};
-
-		pma8084_vadc: adc@3100 {
-			compatible = "qcom,spmi-vadc";
-			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-
-			adc-chan@8 {
-				reg = <VADC_DIE_TEMP>;
-			};
-
-			adc-chan@9 {
-				reg = <VADC_REF_625MV>;
-			};
-
-			adc-chan@a {
-				reg = <VADC_REF_1250MV>;
-			};
-
-			adc-chan@c {
-				reg = <VADC_SPARE1>;
-			};
-
-			adc-chan@e {
-				reg = <VADC_GND_REF>;
-			};
-
-			adc-chan@f {
-				reg = <VADC_VDD_VADC>;
-			};
-		};
-	};
-
-	pma8084_1: pma8084@1 {
-		compatible = "qcom,pma8084", "qcom,spmi-pmic";
-		reg = <0x1 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom-pmx55.dtsi
deleted file mode 100644
index e1b869480bbd9..0000000000000
--- a/arch/arm/boot/dts/qcom-pmx55.dtsi
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-
-/*
- * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
- * Copyright (c) 2020, Linaro Limited
- */
-
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-	pmic@8 {
-		compatible = "qcom,pmx55", "qcom,spmi-pmic";
-		reg = <0x8 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pon@800 {
-			compatible = "qcom,pm8916-pon";
-			reg = <0x0800>;
-
-			status = "disabled";
-		};
-
-		pmx55_temp: temp-alarm@2400 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400>;
-			interrupts = <0x8 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
-			io-channels = <&pmx55_adc ADC5_DIE_TEMP>;
-			io-channel-names = "thermal";
-			#thermal-sensor-cells = <0>;
-		};
-
-		pmx55_adc: adc@3100 {
-			compatible = "qcom,spmi-adc5";
-			reg = <0x3100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-			interrupts = <0x8 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-
-			ref-gnd@0 {
-				reg = <ADC5_REF_GND>;
-				qcom,pre-scaling = <1 1>;
-				label = "ref_gnd";
-			};
-
-			vref-1p25@1 {
-				reg = <ADC5_1P25VREF>;
-				qcom,pre-scaling = <1 1>;
-				label = "vref_1p25";
-			};
-
-			die-temp@6 {
-				reg = <ADC5_DIE_TEMP>;
-				qcom,pre-scaling = <1 1>;
-				label = "die_temp";
-			};
-
-			chg-temp@9 {
-				reg = <ADC5_CHG_TEMP>;
-				qcom,pre-scaling = <1 1>;
-				label = "chg_temp";
-			};
-		};
-
-		pmx55_gpios: gpio@c000 {
-			compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pmx55_gpios 0 0 11>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pmic@9 {
-		compatible = "qcom,pmx55", "qcom,spmi-pmic";
-		reg = <0x9 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi
deleted file mode 100644
index 1c7fdf59c1f56..0000000000000
--- a/arch/arm/boot/dts/qcom-pmx65.dtsi
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-	pmic@1 {
-		compatible = "qcom,pmx65", "qcom,spmi-pmic";
-		reg = <1 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmx65_temp: temp-alarm@a00 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0xa00>;
-			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		pmx65_gpios: gpio@8800 {
-			compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
-			reg = <0x8800>;
-			gpio-controller;
-			gpio-ranges = <&pmx65_gpios 0 0 16>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
deleted file mode 100644
index 7e97ad5803d87..0000000000000
--- a/arch/arm/boot/dts/qcom-sdx55-mtp.dts
+++ /dev/null
@@ -1,255 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
- * Copyright (c) 2020, Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include "qcom-sdx55.dtsi"
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include <arm64/qcom/pm8150b.dtsi>
-#include "qcom-pmx55.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. SDX55 MTP";
-	compatible = "qcom,sdx55-mtp", "qcom,sdx55";
-	qcom,board-id = <0x5010008 0x0>;
-
-	aliases {
-		serial0 = &blsp1_uart3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mpss_debug_mem: memory@8ef00000 {
-			no-map;
-			reg = <0x8ef00000 0x800000>;
-		};
-
-		ipa_fw_mem: memory@8fced000 {
-			no-map;
-			reg = <0x8fced000 0x10000>;
-		};
-
-		mpss_adsp_mem: memory@90c00000 {
-			no-map;
-			reg = <0x90c00000 0xd400000>;
-		};
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-	};
-
-	vreg_bob_3p3: pmx55-bob {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bob_3p3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&vph_pwr>;
-	};
-
-	vreg_s7e_mx_0p752: pmx55-s7e {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_s7e_mx_0p752";
-		regulator-min-microvolt = <752000>;
-		regulator-max-microvolt = <752000>;
-
-		vin-supply = <&vph_pwr>;
-	};
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pmx55-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-		vdd-s7-supply = <&vph_pwr>;
-		vdd-l1-l2-supply = <&vreg_s2e_1p224>;
-		vdd-l3-l9-supply = <&vreg_s3e_0p824>;
-		vdd-l4-l12-supply = <&vreg_s4e_1p904>;
-		vdd-l5-l6-supply = <&vreg_s4e_1p904>;
-		vdd-l7-l8-supply = <&vreg_s3e_0p824>;
-		vdd-l10-l11-l13-supply = <&vreg_bob_3p3>;
-		vdd-l14-supply = <&vreg_s7e_mx_0p752>;
-		vdd-l15-supply = <&vreg_s2e_1p224>;
-		vdd-l16-supply = <&vreg_s4e_1p904>;
-
-		vreg_s2e_1p224: smps2 {
-			regulator-min-microvolt = <1280000>;
-			regulator-max-microvolt = <1400000>;
-		};
-
-		vreg_s3e_0p824: smps3 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1000000>;
-		};
-
-		vreg_s4e_1p904: smps4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1960000>;
-		};
-
-		vreg_l1e_bb_1p2: ldo1 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo2 {
-			regulator-min-microvolt = <1128000>;
-			regulator-max-microvolt = <1128000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo3 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		vreg_l4e_bb_0p875: ldo4 {
-			regulator-min-microvolt = <872000>;
-			regulator-max-microvolt = <872000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		vreg_l5e_bb_1p7: ldo5 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <1900000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo7 {
-			regulator-min-microvolt = <480000>;
-			regulator-max-microvolt = <900000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo8 {
-			regulator-min-microvolt = <480000>;
-			regulator-max-microvolt = <900000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo9 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		vreg_l10e_3p1: ldo10 {
-			regulator-min-microvolt = <3088000>;
-			regulator-max-microvolt = <3088000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo11 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <2928000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo12 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo13 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <2928000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo14 {
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo15 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo16 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <1904000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-	};
-};
-
-&blsp1_uart3 {
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&remoteproc_mpss {
-	memory-region = <&mpss_adsp_mem>;
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_dwc3 {
-	dr_mode = "peripheral";
-};
-
-&usb_hsphy {
-	status = "okay";
-	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
-	vdda33-supply = <&vreg_l10e_3p1>;
-	vdda18-supply = <&vreg_l5e_bb_1p7>;
-};
-
-&usb_qmpphy {
-	status = "okay";
-	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
-	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
-};
diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts
deleted file mode 100644
index 51058b0652797..0000000000000
--- a/arch/arm/boot/dts/qcom-sdx55-t55.dts
+++ /dev/null
@@ -1,331 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2021, Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
-
-/ {
-	model = "Thundercomm T55 Development Kit";
-	compatible = "qcom,sdx55-t55", "qcom,sdx55";
-	qcom,board-id = <0xb010008 0x4>;
-
-	aliases {
-		serial0 = &blsp1_uart3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mpss_debug_mem: memory@8ef00000 {
-			no-map;
-			reg = <0x8ef00000 0x800000>;
-		};
-
-		ipa_fw_mem: memory@8fced000 {
-			no-map;
-			reg = <0x8fced000 0x10000>;
-		};
-
-		mpss_adsp_mem: memory@90800000 {
-			no-map;
-			reg = <0x90800000 0xf800000>;
-		};
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-	};
-
-	vreg_bob_3p3: pmx55-bob {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bob_3p3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&vph_pwr>;
-	};
-
-	vreg_s7e_mx_0p752: pmx55-s7e {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_s7e_mx_0p752";
-		regulator-min-microvolt = <752000>;
-		regulator-max-microvolt = <752000>;
-
-		vin-supply = <&vph_pwr>;
-	};
-
-	vreg_sd_vdd: sd-vdd {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_sd_vdd";
-		regulator-min-microvolt = <2950000>;
-		regulator-max-microvolt = <2950000>;
-
-		vin-supply = <&vreg_vddpx_2>;
-	};
-
-	vreg_vddpx_2: vddpx-2 {
-		compatible = "regulator-gpio";
-		regulator-name = "vreg_vddpx_2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <2850000>;
-		enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
-		gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0>, <2850000 1>;
-		startup-delay-us = <200000>;
-		enable-active-high;
-		regulator-boot-on;
-
-		vin-supply = <&vph_pwr>;
-	};
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pmx55-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-		vdd-s7-supply = <&vph_pwr>;
-		vdd-l1-l2-supply = <&vreg_s2e_1p224>;
-		vdd-l3-l9-supply = <&vreg_s3e_0p824>;
-		vdd-l4-l12-supply = <&vreg_s4e_1p904>;
-		vdd-l5-l6-supply = <&vreg_s4e_1p904>;
-		vdd-l7-l8-supply = <&vreg_s3e_0p824>;
-		vdd-l10-l11-l13-supply = <&vreg_bob_3p3>;
-		vdd-l14-supply = <&vreg_s7e_mx_0p752>;
-		vdd-l15-supply = <&vreg_s2e_1p224>;
-		vdd-l16-supply = <&vreg_s4e_1p904>;
-
-		vreg_s2e_1p224: smps2 {
-			regulator-min-microvolt = <1280000>;
-			regulator-max-microvolt = <1400000>;
-		};
-
-		vreg_s3e_0p824: smps3 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1000000>;
-		};
-
-		vreg_s4e_1p904: smps4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1960000>;
-		};
-
-		vreg_l1e_bb_1p2: ldo1 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo2 {
-			regulator-min-microvolt = <1128000>;
-			regulator-max-microvolt = <1128000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo3 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		vreg_l4e_bb_0p875: ldo4 {
-			regulator-min-microvolt = <872000>;
-			regulator-max-microvolt = <872000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		vreg_l5e_bb_1p7: ldo5 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <1900000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo7 {
-			regulator-min-microvolt = <480000>;
-			regulator-max-microvolt = <900000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo8 {
-			regulator-min-microvolt = <480000>;
-			regulator-max-microvolt = <900000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo9 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		vreg_l10e_3p1: ldo10 {
-			regulator-min-microvolt = <3088000>;
-			regulator-max-microvolt = <3088000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo11 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <2928000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo12 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo13 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <2928000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo14 {
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo15 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo16 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <1904000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-	};
-};
-
-&blsp1_uart3 {
-	status = "okay";
-};
-
-&ipa {
-	qcom,gsi-loader = "self";
-	memory-region = <&ipa_fw_mem>;
-	status = "okay";
-};
-
-&pcie_phy {
-	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
-	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
-
-	status = "okay";
-};
-
-&pcie_rc {
-	perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-0 = <&pcie_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-		/* efs2 partition is secured */
-		secure-regions = /bits/ 64 <0x500000 0xb00000>;
-	};
-};
-
-&remoteproc_mpss {
-	memory-region = <&mpss_adsp_mem>;
-	status = "okay";
-};
-
-&tlmm {
-	pcie_default: pcie-default-state {
-		clkreq-pins {
-			pins = "gpio56";
-			function = "pcie_clkreq";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-pins {
-			pins = "gpio57";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		wake-pins {
-		       pins = "gpio53";
-		       function = "gpio";
-		       drive-strength = <2>;
-		       bias-pull-up;
-	       };
-	};
-};
-
-&usb_hsphy {
-	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
-	vdda33-supply = <&vreg_l10e_3p1>;
-	vdda18-supply = <&vreg_l5e_bb_1p7>;
-
-	status = "okay";
-};
-
-&usb_qmpphy {
-	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
-	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
-
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_dwc3 {
-	dr_mode = "peripheral";
-};
diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
deleted file mode 100644
index 8fadc6e70692a..0000000000000
--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ /dev/null
@@ -1,331 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2021, Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
-
-/ {
-	model = "Telit FN980 TLB";
-	compatible = "qcom,sdx55-telit-fn980-tlb", "qcom,sdx55";
-	qcom,board-id = <0xb010008 0x0>;
-
-	aliases {
-		serial0 = &blsp1_uart3;
-	};
-
-	chosen {
-		stdout-path = "serial0:921600n8";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mpss_debug_mem: memory@8ef00000 {
-			no-map;
-			reg = <0x8ef00000 0x800000>;
-		};
-
-		ipa_fw_mem: memory@8fced000 {
-			no-map;
-			reg = <0x8fced000 0x10000>;
-		};
-
-		mpss_adsp_mem: memory@90800000 {
-			no-map;
-			reg = <0x90800000 0xf800000>;
-		};
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-	};
-
-	vreg_bob_3p3: pmx55-bob {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bob_3p3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&vph_pwr>;
-	};
-
-	vreg_s7e_mx_0p752: pmx55-s7e {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_s7e_mx_0p752";
-		regulator-min-microvolt = <752000>;
-		regulator-max-microvolt = <752000>;
-
-		vin-supply = <&vph_pwr>;
-	};
-
-	vreg_sd_vdd: sd-vdd {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_sd_vdd";
-		regulator-min-microvolt = <2950000>;
-		regulator-max-microvolt = <2950000>;
-
-		vin-supply = <&vreg_vddpx_2>;
-	};
-
-	vreg_vddpx_2: vddpx-2 {
-		compatible = "regulator-gpio";
-		regulator-name = "vreg_vddpx_2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <2850000>;
-		enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
-		gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0>, <2850000 1>;
-		startup-delay-us = <200000>;
-		enable-active-high;
-		regulator-boot-on;
-
-		vin-supply = <&vph_pwr>;
-	};
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pmx55-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-		vdd-s7-supply = <&vph_pwr>;
-		vdd-l1-l2-supply = <&vreg_s2e_1p224>;
-		vdd-l3-l9-supply = <&vreg_s3e_0p824>;
-		vdd-l4-l12-supply = <&vreg_s4e_1p904>;
-		vdd-l5-l6-supply = <&vreg_s4e_1p904>;
-		vdd-l7-l8-supply = <&vreg_s3e_0p824>;
-		vdd-l10-l11-l13-supply = <&vreg_bob_3p3>;
-		vdd-l14-supply = <&vreg_s7e_mx_0p752>;
-		vdd-l15-supply = <&vreg_s2e_1p224>;
-		vdd-l16-supply = <&vreg_s4e_1p904>;
-
-		vreg_s2e_1p224: smps2 {
-			regulator-min-microvolt = <1280000>;
-			regulator-max-microvolt = <1400000>;
-		};
-
-		vreg_s3e_0p824: smps3 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1000000>;
-		};
-
-		vreg_s4e_1p904: smps4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1960000>;
-		};
-
-		vreg_l1e_bb_1p2: ldo1 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo2 {
-			regulator-min-microvolt = <1128000>;
-			regulator-max-microvolt = <1128000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo3 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		vreg_l4e_bb_0p875: ldo4 {
-			regulator-min-microvolt = <872000>;
-			regulator-max-microvolt = <872000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		vreg_l5e_bb_1p7: ldo5 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <1900000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo7 {
-			regulator-min-microvolt = <480000>;
-			regulator-max-microvolt = <900000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo8 {
-			regulator-min-microvolt = <480000>;
-			regulator-max-microvolt = <900000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo9 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		vreg_l10e_3p1: ldo10 {
-			regulator-min-microvolt = <3088000>;
-			regulator-max-microvolt = <3088000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo11 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <2928000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo12 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo13 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <2928000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo14 {
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo15 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-
-		ldo16 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <1904000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-		};
-	};
-};
-
-&blsp1_uart3 {
-	status = "okay";
-};
-
-&ipa {
-	qcom,gsi-loader = "self";
-	memory-region = <&ipa_fw_mem>;
-	status = "okay";
-};
-
-&pcie_phy {
-	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
-	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
-
-	status = "okay";
-};
-
-&pcie_ep {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default
-		     &pcie_ep_wake_default>;
-
-	reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-		/* ico and efs2 partitions are secured */
-		secure-regions = /bits/ 64 <0x500000 0x500000
-					    0xa00000 0xb00000>;
-	};
-};
-
-&remoteproc_mpss {
-	memory-region = <&mpss_adsp_mem>;
-	status = "okay";
-};
-
-&tlmm {
-	pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
-		pins = "gpio56";
-		function = "pcie_clkreq";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	pcie_ep_perst_default: pcie-ep-perst-default-state {
-		pins = "gpio57";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	pcie_ep_wake_default: pcie-ep-wake-default-state {
-		pins = "gpio53";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-};
-
-&usb_hsphy {
-	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
-	vdda33-supply = <&vreg_l10e_3p1>;
-	vdda18-supply = <&vreg_l5e_bb_1p7>;
-
-	status = "okay";
-};
-
-&usb_qmpphy {
-	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
-	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
-
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_dwc3 {
-	dr_mode = "peripheral";
-};
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
deleted file mode 100644
index 342c3d14001eb..0000000000000
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ /dev/null
@@ -1,877 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * SDX55 SoC device tree source
- *
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- * Copyright (c) 2020, Linaro Ltd.
- */
-
-#include <dt-bindings/clock/qcom,gcc-sdx55.h>
-#include <dt-bindings/clock/qcom,rpmh.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interconnect/qcom,sdx55.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include <dt-bindings/soc/qcom,rpmh-rsc.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>;
-	interrupt-parent = <&intc>;
-
-	memory {
-		device_type = "memory";
-		reg = <0 0>;
-	};
-
-	clocks {
-		xo_board: xo-board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <38400000>;
-			clock-output-names = "xo_board";
-		};
-
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32000>;
-		};
-
-		nand_clk_dummy: nand-clk-dummy {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32000>;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			enable-method = "psci";
-			clocks = <&apcs>;
-			power-domains = <&rpmhpd SDX55_CX>;
-			power-domain-names = "rpmhpd";
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-sdx55", "qcom,scm";
-		};
-	};
-
-	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-345600000 {
-			opp-hz = /bits/ 64 <345600000>;
-			required-opps = <&rpmhpd_opp_low_svs>;
-		};
-
-		opp-576000000 {
-			opp-hz = /bits/ 64 <576000000>;
-			required-opps = <&rpmhpd_opp_svs>;
-		};
-
-		opp-1094400000 {
-			opp-hz = /bits/ 64 <1094400000>;
-			required-opps = <&rpmhpd_opp_nom>;
-		};
-
-		opp-1555200000 {
-			opp-hz = /bits/ 64 <1555200000>;
-			required-opps = <&rpmhpd_opp_turbo>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		hyp_mem: memory@8fc00000 {
-			no-map;
-			reg = <0x8fc00000 0x80000>;
-		};
-
-		ac_db_mem: memory@8fc80000 {
-			no-map;
-			reg = <0x8fc80000 0x40000>;
-		};
-
-		secdata_mem: memory@8fcfd000 {
-			no-map;
-			reg = <0x8fcfd000 0x1000>;
-		};
-
-		sbl_mem: memory@8fd00000 {
-			no-map;
-			reg = <0x8fd00000 0x100000>;
-		};
-
-		aop_image: memory@8fe00000 {
-			no-map;
-			reg = <0x8fe00000 0x20000>;
-		};
-
-		aop_cmd_db: memory@8fe20000 {
-			compatible = "qcom,cmd-db";
-			reg = <0x8fe20000 0x20000>;
-			no-map;
-		};
-
-		smem_mem: memory@8fe40000 {
-			no-map;
-			reg = <0x8fe40000 0xc0000>;
-		};
-
-		tz_mem: memory@8ff00000 {
-			no-map;
-			reg = <0x8ff00000 0x100000>;
-		};
-
-		tz_apps_mem: memory@90000000 {
-			no-map;
-			reg = <0x90000000 0x500000>;
-		};
-	};
-
-	smem {
-		compatible = "qcom,smem";
-		memory-region = <&smem_mem>;
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
-	smp2p-mpss {
-		compatible = "qcom,smp2p";
-		qcom,smem = <435>, <428>;
-		interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
-		mboxes = <&apcs 14>;
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <1>;
-
-		modem_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		modem_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		ipa_smp2p_out: ipa-ap-to-modem {
-			qcom,entry-name = "ipa";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		ipa_smp2p_in: ipa-modem-to-ap {
-			qcom,entry-name = "ipa";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		gcc: clock-controller@100000 {
-			compatible = "qcom,gcc-sdx55";
-			reg = <0x100000 0x1f0000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			clock-names = "bi_tcxo", "sleep_clk";
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
-		};
-
-		blsp1_uart3: serial@831000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x00831000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc 30>,
-				 <&gcc 9>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		usb_hsphy: phy@ff4000 {
-			compatible = "qcom,sdx55-usb-hs-phy",
-				     "qcom,usb-snps-hs-7nm-phy";
-			reg = <0x00ff4000 0x114>;
-			status = "disabled";
-			#phy-cells = <0>;
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ref";
-
-			resets = <&gcc GCC_QUSB2PHY_BCR>;
-		};
-
-		usb_qmpphy: phy@ff6000 {
-			compatible = "qcom,sdx55-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
-
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6200 0x170>,
-				      <0x00ff6400 0x200>,
-				      <0x00ff6800 0x800>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
-		};
-
-		mc_virt: interconnect@1100000 {
-			compatible = "qcom,sdx55-mc-virt";
-			reg = <0x01100000 0x400000>;
-			#interconnect-cells = <1>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		mem_noc: interconnect@9680000 {
-			compatible = "qcom,sdx55-mem-noc";
-			reg = <0x09680000 0x40000>;
-			#interconnect-cells = <1>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		system_noc: interconnect@162c000 {
-			compatible = "qcom,sdx55-system-noc";
-			reg = <0x0162c000 0x31200>;
-			#interconnect-cells = <1>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		qpic_bam: dma-controller@1b04000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x01b04000 0x1c000>;
-			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rpmhcc RPMH_QPIC_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-			qcom,controlled-remotely;
-			status = "disabled";
-		};
-
-		qpic_nand: nand-controller@1b30000 {
-			compatible = "qcom,sdx55-nand";
-			reg = <0x01b30000 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&rpmhcc RPMH_QPIC_CLK>,
-				 <&nand_clk_dummy>;
-			clock-names = "core", "aon";
-
-			dmas = <&qpic_bam 0>,
-			       <&qpic_bam 1>,
-			       <&qpic_bam 2>;
-			dma-names = "tx", "rx", "cmd";
-			status = "disabled";
-		};
-
-		pcie_rc: pcie@1c00000 {
-			compatible = "qcom,pcie-sdx55";
-			reg = <0x01c00000 0x3000>,
-			      <0x40000000 0xf1d>,
-			      <0x40000f20 0xc8>,
-			      <0x40001000 0x1000>,
-			      <0x40100000 0x100000>;
-			reg-names = "parf",
-				    "dbi",
-				    "elbi",
-				    "atu",
-				    "config";
-			device_type = "pci";
-			linux,pci-domain = <0>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x01000000 0x0 0x00000000 0x40200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x40300000 0x40300000 0x0 0x3fd00000>;
-
-			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi",
-					  "msi2",
-					  "msi3",
-					  "msi4",
-					  "msi5",
-					  "msi6",
-					  "msi7",
-					  "msi8";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
-				 <&gcc GCC_PCIE_AUX_CLK>,
-				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLEEP_CLK>;
-			clock-names = "pipe",
-				      "aux",
-				      "cfg",
-				      "bus_master",
-				      "bus_slave",
-				      "slave_q2a",
-				      "sleep";
-
-			assigned-clocks = <&gcc GCC_PCIE_AUX_CLK>;
-			assigned-clock-rates = <19200000>;
-
-			iommu-map = <0x0   &apps_smmu 0x0200 0x1>,
-				    <0x100 &apps_smmu 0x0201 0x1>,
-				    <0x200 &apps_smmu 0x0202 0x1>,
-				    <0x300 &apps_smmu 0x0203 0x1>,
-				    <0x400 &apps_smmu 0x0204 0x1>;
-
-			resets = <&gcc GCC_PCIE_BCR>;
-			reset-names = "pci";
-
-			power-domains = <&gcc PCIE_GDSC>;
-
-			phys = <&pcie_lane>;
-			phy-names = "pciephy";
-
-			status = "disabled";
-		};
-
-		pcie_ep: pcie-ep@1c00000 {
-			compatible = "qcom,sdx55-pcie-ep";
-			reg = <0x01c00000 0x3000>,
-			      <0x40000000 0xf1d>,
-			      <0x40000f20 0xc8>,
-			      <0x40001000 0x1000>,
-			      <0x40200000 0x100000>,
-			      <0x01c03000 0x3000>;
-			reg-names = "parf",
-				    "dbi",
-				    "elbi",
-				    "atu",
-				    "addr_space",
-				    "mmio";
-
-			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
-
-			clocks = <&gcc GCC_PCIE_AUX_CLK>,
-				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLEEP_CLK>,
-				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
-			clock-names = "aux",
-				      "cfg",
-				      "bus_master",
-				      "bus_slave",
-				      "slave_q2a",
-				      "sleep",
-				      "ref";
-
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global",
-					  "doorbell";
-			resets = <&gcc GCC_PCIE_BCR>;
-			reset-names = "core";
-			power-domains = <&gcc PCIE_GDSC>;
-			phys = <&pcie_lane>;
-			phy-names = "pciephy";
-			max-link-speed = <3>;
-			num-lanes = <2>;
-
-			status = "disabled";
-		};
-
-		pcie_phy: phy@1c07000 {
-			compatible = "qcom,sdx55-qmp-pcie-phy";
-			reg = <0x01c07000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
-				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
-			clock-names = "aux",
-				      "cfg_ahb",
-				      "ref",
-				      "refgen";
-
-			resets = <&gcc GCC_PCIE_PHY_BCR>;
-			reset-names = "phy";
-
-			assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
-			assigned-clock-rates = <100000000>;
-
-			status = "disabled";
-
-			pcie_lane: lanes@1c06000 {
-				reg = <0x01c06000 0x104>, /* tx0 */
-				      <0x01c06200 0x328>, /* rx0 */
-				      <0x01c07200 0x1e8>, /* pcs */
-				      <0x01c06800 0x104>, /* tx1 */
-				      <0x01c06a00 0x328>, /* rx1 */
-				      <0x01c07600 0x800>; /* pcs_misc */
-				clocks = <&gcc GCC_PCIE_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#phy-cells = <0>;
-				clock-output-names = "pcie_pipe_clk";
-			};
-		};
-
-		ipa: ipa@1e40000 {
-			compatible = "qcom,sdx55-ipa";
-
-			iommus = <&apps_smmu 0x5e0 0x0>,
-				 <&apps_smmu 0x5e2 0x0>;
-			reg = <0x1e40000 0x7000>,
-			      <0x1e50000 0x4b20>,
-			      <0x1e04000 0x2c000>;
-			reg-names = "ipa-reg",
-				    "ipa-shared",
-				    "gsi";
-
-			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
-					      <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ipa",
-					  "gsi",
-					  "ipa-clock-query",
-					  "ipa-setup-ready";
-
-			clocks = <&rpmhcc RPMH_IPA_CLK>;
-			clock-names = "core";
-
-			interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>,
-					<&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>,
-					<&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>;
-			interconnect-names = "memory",
-					     "imem",
-					     "config";
-
-			qcom,smem-states = <&ipa_smp2p_out 0>,
-					   <&ipa_smp2p_out 1>;
-			qcom,smem-state-names = "ipa-clock-enabled-valid",
-						"ipa-clock-enabled";
-
-			status = "disabled";
-		};
-
-		tcsr_mutex: hwlock@1f40000 {
-			compatible = "qcom,tcsr-mutex";
-			reg = <0x01f40000 0x40000>;
-			#hwlock-cells = <1>;
-		};
-
-		tcsr: syscon@1fcb000 {
-			compatible = "qcom,sdx55-tcsr", "syscon";
-			reg = <0x01fc0000 0x1000>;
-		};
-
-		sdhc_1: mmc@8804000 {
-			compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0x08804000 0x1000>;
-			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&gcc GCC_SDCC1_APPS_CLK>;
-			clock-names = "iface", "core";
-			status = "disabled";
-		};
-
-		remoteproc_mpss: remoteproc@4080000 {
-			compatible = "qcom,sdx55-mpss-pas";
-			reg = <0x04080000 0x4040>;
-
-			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover",
-					  "stop-ack", "shutdown-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd SDX55_CX>,
-					<&rpmhpd SDX55_MSS>;
-			power-domain-names = "cx", "mss";
-
-			qcom,smem-states = <&modem_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
-				label = "mpss";
-				qcom,remote-pid = <1>;
-				mboxes = <&apcs 15>;
-			};
-		};
-
-		usb: usb@a6f8800 {
-			compatible = "qcom,sdx55-dwc3", "qcom,dwc3";
-			reg = <0x0a6f8800 0x400>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
-				 <&gcc GCC_USB30_MASTER_CLK>,
-				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
-				 <&gcc GCC_USB30_SLEEP_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
-			clock-names = "cfg_noc",
-				      "core",
-				      "iface",
-				      "sleep",
-				      "mock_utmi";
-
-			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <200000000>;
-
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
-
-			power-domains = <&gcc USB30_GDSC>;
-
-			resets = <&gcc GCC_USB30_BCR>;
-
-			usb_dwc3: dwc3@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0x0a600000 0xcd00>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x1a0 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		pdc: interrupt-controller@b210000 {
-			compatible = "qcom,sdx55-pdc", "qcom,pdc";
-			reg = <0x0b210000 0x30000>;
-			qcom,pdc-ranges = <0 179 52>;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&intc>;
-			interrupt-controller;
-		};
-
-		restart@c264000 {
-			compatible = "qcom,pshold";
-			reg = <0x0c264000 0x1000>;
-		};
-
-		spmi_bus: spmi@c440000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x0c440000 0x0000d00>,
-			      <0x0c600000 0x2000000>,
-			      <0x0e600000 0x0100000>,
-			      <0x0e700000 0x00a0000>,
-			      <0x0c40a000 0x0000700>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-			cell-index = <0>;
-		};
-
-		tlmm: pinctrl@f100000 {
-			compatible = "qcom,sdx55-pinctrl";
-			reg = <0xf100000 0x300000>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 108>;
-		};
-
-		sram@1468f000 {
-			compatible = "qcom,sdx55-imem", "syscon", "simple-mfd";
-			reg = <0x1468f000 0x1000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0x0 0x1468f000 0x1000>;
-
-			pil-reloc@94c {
-				compatible = "qcom,pil-reloc-info";
-				reg = <0x94c 0x200>;
-			};
-		};
-
-		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
-			reg = <0x15000000 0x20000>;
-			#iommu-cells = <2>;
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		intc: interrupt-controller@17800000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			interrupt-parent = <&intc>;
-			#interrupt-cells = <3>;
-			reg = <0x17800000 0x1000>,
-			      <0x17802000 0x1000>;
-		};
-
-		a7pll: clock@17808000 {
-			compatible = "qcom,sdx55-a7pll";
-			reg = <0x17808000 0x1000>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "bi_tcxo";
-			#clock-cells = <0>;
-		};
-
-		apcs: mailbox@17810000 {
-			compatible = "qcom,sdx55-apcs-gcc", "syscon";
-			reg = <0x17810000 0x2000>;
-			#mbox-cells = <1>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
-			clock-names = "ref", "pll", "aux";
-			#clock-cells = <0>;
-		};
-
-		watchdog@17817000 {
-			compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt";
-			reg = <0x17817000 0x1000>;
-			clocks = <&sleep_clk>;
-		};
-
-		timer@17820000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0x17820000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@17821000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 7 0x4>,
-					     <GIC_SPI 6 0x4>;
-				reg = <0x17821000 0x1000>,
-				      <0x17822000 0x1000>;
-			};
-
-			frame@17823000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 8 0x4>;
-				reg = <0x17823000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17824000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 9 0x4>;
-				reg = <0x17824000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17825000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 10 0x4>;
-				reg = <0x17825000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17826000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 11 0x4>;
-				reg = <0x17826000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17827000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 12 0x4>;
-				reg = <0x17827000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17828000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 13 0x4>;
-				reg = <0x17828000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17829000 {
-				frame-number = <7>;
-				interrupts = <GIC_SPI 14 0x4>;
-				reg = <0x17829000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		apps_rsc: rsc@17840000 {
-			compatible = "qcom,rpmh-rsc";
-			reg = <0x17830000 0x10000>, <0x17840000 0x10000>;
-			reg-names = "drv-0", "drv-1";
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,tcs-offset = <0xd00>;
-			qcom,drv-id = <1>;
-			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   2>,
-					  <WAKE_TCS    2>, <CONTROL_TCS 1>;
-
-			rpmhcc: clock-controller {
-				compatible = "qcom,sdx55-rpmh-clk";
-				#clock-cells = <1>;
-				clock-names = "xo";
-				clocks = <&xo_board>;
-			};
-
-			rpmhpd: power-controller {
-				compatible = "qcom,sdx55-rpmhpd";
-				#power-domain-cells = <1>;
-				operating-points-v2 = <&rpmhpd_opp_table>;
-
-				rpmhpd_opp_table: opp-table {
-					compatible = "operating-points-v2";
-
-					rpmhpd_opp_ret: opp1 {
-						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
-					};
-
-					rpmhpd_opp_min_svs: opp2 {
-						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-					};
-
-					rpmhpd_opp_low_svs: opp3 {
-						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					};
-
-					rpmhpd_opp_svs: opp4 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					};
-
-					rpmhpd_opp_svs_l1: opp5 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					};
-
-					rpmhpd_opp_nom: opp6 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					};
-
-					rpmhpd_opp_nom_l1: opp7 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					};
-
-					rpmhpd_opp_nom_l2: opp8 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
-					};
-
-					rpmhpd_opp_turbo: opp9 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					};
-
-					rpmhpd_opp_turbo_l1: opp10 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					};
-				};
-			};
-
-			apps_bcm_voter: bcm-voter {
-				compatible = "qcom,bcm-voter";
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <19200000>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
deleted file mode 100644
index 57bc3b03d3aac..0000000000000
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ /dev/null
@@ -1,296 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-/dts-v1/;
-
-#include "qcom-sdx65.dtsi"
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include <arm64/qcom/pmk8350.dtsi>
-#include <arm64/qcom/pm8150b.dtsi>
-#include "qcom-pmx65.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. SDX65 MTP";
-	compatible = "qcom,sdx65-mtp", "qcom,sdx65";
-	qcom,board-id = <0x2010008 0x302>;
-
-	aliases {
-		serial0 = &blsp1_uart3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mpss_dsm: memory@8c400000 {
-			no-map;
-			reg = <0x8c400000 0x3200000>;
-		};
-
-		ipa_fw_mem: memory@8fced000 {
-			no-map;
-			reg = <0x8fced000 0x10000>;
-		};
-
-		mpss_adsp_mem: memory@90800000 {
-			no-map;
-			reg = <0x90800000 0x10000000>;
-		};
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-	};
-
-	vreg_bob_3p3: pmx65_bob {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bob_3p3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&vph_pwr>;
-	};
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pmx65-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-		vdd-s7-supply = <&vph_pwr>;
-		vdd-s8-supply = <&vph_pwr>;
-		vdd-l1-supply = <&vreg_s2b_1p224>;
-		vdd-l2-l18-supply = <&vreg_s2b_1p224>;
-		vdd-l3-supply = <&vreg_s8b_0p824>;
-		vdd-l4-supply = <&vreg_s7b_0p936>;
-		vdd-l5-l6-l16-supply = <&vreg_s4b_1p824>;
-		vdd-l7-supply = <&vreg_s3b_0p776>;
-		vdd-l8-l9-supply = <&vreg_s8b_0p824>;
-		vdd-l10-supply = <&vreg_bob_3p3>;
-		vdd-l11-l13-supply = <&vreg_bob_3p3>;
-		vdd-l12-supply = <&vreg_s2b_1p224>;
-		vdd-l14-supply = <&vreg_s3b_0p776>;
-		vdd-l15-supply = <&vreg_s2b_1p224>;
-		vdd-l17-supply = <&vreg_s8b_0p824>;
-		vdd-l19-supply = <&vreg_s3b_0p776>;
-		vdd-l20-supply = <&vreg_s7b_0p936>;
-		vdd-l21-supply = <&vreg_s7b_0p936>;
-
-		vreg_s2b_1p224: smps2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1400000>;
-		};
-
-		vreg_s3b_0p776: smps3 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1040000>;
-		};
-
-		vreg_s4b_1p824: smps4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2024000>;
-		};
-
-		vreg_s7b_0p936: smps7 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1040000>;
-		};
-
-		vreg_s8b_0p824: smps8 {
-			regulator-min-microvolt = <304000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		vreg_l1b_1p2: ldo1 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo2 {
-			regulator-min-microvolt = <1128000>;
-			regulator-max-microvolt = <1128000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo3 {
-			regulator-min-microvolt = <300000>;
-			regulator-max-microvolt = <960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4b_0p88: ldo4 {
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l5b_1p8: ldo5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo7 {
-			regulator-min-microvolt = <752000>;
-			regulator-max-microvolt = <752000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo8 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo9 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l10b_3p08: ldo10 {
-			regulator-min-microvolt = <3088000>;
-			regulator-max-microvolt = <3088000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo11 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <2928000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo12 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo13 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <2928000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo14 {
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo15 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo16 {
-			regulator-min-microvolt = <1776000>;
-			regulator-max-microvolt = <1776000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo17 {
-			regulator-min-microvolt = <300000>;
-			regulator-max-microvolt = <960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo19 {
-			regulator-min-microvolt = <752000>;
-			regulator-max-microvolt = <752000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo20 {
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		ldo21 {
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-};
-
-&blsp1_uart3 {
-	status = "okay";
-};
-
-&ipa {
-	qcom,gsi-loader = "skip";
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-		/* ico and efs2 partitions are secured */
-		secure-regions = /bits/ 64 <0x500000 0x500000
-					    0xa00000 0xb00000>;
-	};
-};
-
-&remoteproc_mpss {
-	memory-region = <&mpss_adsp_mem>;
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_dwc3 {
-	dr_mode = "peripheral";
-};
-
-&usb_hsphy {
-	vdda-pll-supply = <&vreg_l4b_0p88>;
-	vdda33-supply = <&vreg_l10b_3p08>;
-	vdda18-supply = <&vreg_l5b_1p8>;
-	status = "okay";
-};
-
-&usb_qmpphy {
-	vdda-phy-supply = <&vreg_l4b_0p88>;
-	vdda-pll-supply = <&vreg_l1b_1p2>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
deleted file mode 100644
index 525dd8a1f6649..0000000000000
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ /dev/null
@@ -1,724 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * SDX65 SoC device tree source
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- */
-
-#include <dt-bindings/clock/qcom,gcc-sdx65.h>
-#include <dt-bindings/clock/qcom,rpmh.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include <dt-bindings/soc/qcom,rpmh-rsc.h>
-#include <dt-bindings/interconnect/qcom,sdx65.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>;
-	interrupt-parent = <&intc>;
-
-	memory {
-		device_type = "memory";
-		reg = <0 0>;
-	};
-
-	clocks {
-		xo_board: xo-board {
-			compatible = "fixed-clock";
-			clock-frequency = <76800000>;
-			clock-output-names = "xo_board";
-			#clock-cells = <0>;
-		};
-
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			clock-frequency = <32764>;
-			clock-output-names = "sleep_clk";
-			#clock-cells = <0>;
-		};
-
-		nand_clk_dummy: nand-clk-dummy {
-			compatible = "fixed-clock";
-			clock-frequency = <32764>;
-			#clock-cells = <0>;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			enable-method = "psci";
-			clocks = <&apcs>;
-			power-domains = <&rpmhpd SDX65_CX_AO>;
-			power-domain-names = "rpmhpd";
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-sdx65", "qcom,scm";
-		};
-	};
-
-	mc_virt: interconnect-mc-virt {
-		compatible = "qcom,sdx65-mc-virt";
-		#interconnect-cells = <1>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-345600000 {
-			opp-hz = /bits/ 64 <345600000>;
-			required-opps = <&rpmhpd_opp_low_svs>;
-		};
-
-		opp-576000000 {
-			opp-hz = /bits/ 64 <576000000>;
-			required-opps = <&rpmhpd_opp_svs>;
-		};
-
-		opp-1094400000 {
-			opp-hz = /bits/ 64 <1094400000>;
-			required-opps = <&rpmhpd_opp_nom>;
-		};
-
-		opp-1497600000 {
-			opp-hz = /bits/ 64 <1497600000>;
-			required-opps = <&rpmhpd_opp_turbo>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	reserved_memory: reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		tz_heap_mem: memory@8fcad000 {
-			no-map;
-			reg = <0x8fcad000 0x40000>;
-		};
-
-		secdata_mem: memory@8fcfd000 {
-			no-map;
-			reg = <0x8fcfd000 0x1000>;
-		};
-
-		hyp_mem: memory@8fd00000 {
-			no-map;
-			reg = <0x8fd00000 0x80000>;
-		};
-
-		access_control_mem: memory@8fd80000 {
-			no-map;
-			reg = <0x8fd80000 0x80000>;
-		};
-
-		aop_mem: memory@8fe00000 {
-			no-map;
-			reg = <0x8fe00000 0x20000>;
-		};
-
-		smem_mem: memory@8fe20000 {
-			compatible = "qcom,smem";
-			reg = <0x8fe20000 0xc0000>;
-			hwlocks = <&tcsr_mutex 3>;
-			no-map;
-		};
-
-		cmd_db: reserved-memory@8fee0000 {
-			compatible = "qcom,cmd-db";
-			reg = <0x8fee0000 0x20000>;
-			no-map;
-		};
-
-		tz_mem: memory@8ff00000 {
-			no-map;
-			reg = <0x8ff00000 0x100000>;
-		};
-
-		tz_apps_mem: memory@90000000 {
-			no-map;
-			reg = <0x90000000 0x500000>;
-		};
-
-		llcc_tcm_mem: memory@15800000 {
-			no-map;
-			reg = <0x15800000 0x800000>;
-		};
-	};
-
-	smp2p-mpss {
-		compatible = "qcom,smp2p";
-		qcom,smem = <435>, <428>;
-		interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
-		mboxes = <&apcs 14>;
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <1>;
-
-		modem_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		modem_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		ipa_smp2p_out: ipa-ap-to-modem {
-			qcom,entry-name = "ipa";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		ipa_smp2p_in: ipa-modem-to-ap {
-			qcom,entry-name = "ipa";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		gcc: clock-controller@100000 {
-			compatible = "qcom,gcc-sdx65";
-			reg = <0x00100000 0x001f7400>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
-			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
-			#power-domain-cells = <1>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		blsp1_uart3: serial@831000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x00831000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		usb_hsphy: phy@ff4000 {
-			compatible = "qcom,sdx65-usb-hs-phy",
-				     "qcom,usb-snps-hs-7nm-phy";
-			reg = <0xff4000 0x120>;
-			#phy-cells = <0>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_BCR>;
-			status = "disabled";
-		};
-
-		usb_qmpphy: phy@ff6000 {
-			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c8>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_EN>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
-
-			status = "disabled";
-
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6e00 0x160>,
-				      <0x00ff7000 0x1ec>,
-				      <0x00ff6200 0x1e00>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
-		};
-
-		system_noc: interconnect@1620000 {
-			compatible = "qcom,sdx65-system-noc";
-			reg = <0x01620000 0x31200>;
-			#interconnect-cells = <1>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		qpic_bam: dma-controller@1b04000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x01b04000 0x1c000>;
-			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rpmhcc RPMH_QPIC_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-			qcom,controlled-remotely;
-			status = "disabled";
-		};
-
-		qpic_nand: nand-controller@1b30000 {
-			compatible = "qcom,sdx55-nand";
-			reg = <0x01b30000 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&rpmhcc RPMH_QPIC_CLK>,
-				 <&nand_clk_dummy>;
-			clock-names = "core", "aon";
-
-			dmas = <&qpic_bam 0>,
-			       <&qpic_bam 1>,
-			       <&qpic_bam 2>;
-			dma-names = "tx", "rx", "cmd";
-			status = "disabled";
-		};
-
-		tcsr_mutex: hwlock@1f40000 {
-			compatible = "qcom,tcsr-mutex";
-			reg = <0x01f40000 0x40000>;
-			#hwlock-cells = <1>;
-		};
-
-		ipa: ipa@3f40000 {
-			compatible = "qcom,sdx65-ipa";
-
-			reg = <0x03f40000 0x10000>,
-			      <0x03f50000 0x5000>,
-			      <0x03e04000 0xfc000>;
-			reg-names = "ipa-reg",
-				    "ipa-shared",
-				    "gsi";
-
-			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
-					      <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ipa",
-					  "gsi",
-					  "ipa-clock-query",
-					  "ipa-setup-ready";
-
-			iommus = <&apps_smmu 0x5e0 0x0>,
-				 <&apps_smmu 0x5e2 0x0>;
-
-			clocks = <&rpmhcc RPMH_IPA_CLK>;
-			clock-names = "core";
-
-			interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
-					<&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_IPA_CFG>;
-			interconnect-names = "memory",
-					     "config";
-
-			qcom,smem-states = <&ipa_smp2p_out 0>,
-					   <&ipa_smp2p_out 1>;
-			qcom,smem-state-names = "ipa-clock-enabled-valid",
-						"ipa-clock-enabled";
-
-			status = "disabled";
-		};
-
-		remoteproc_mpss: remoteproc@4080000 {
-			compatible = "qcom,sdx55-mpss-pas";
-			reg = <0x04080000 0x4040>;
-
-			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover",
-					  "stop-ack", "shutdown-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd SDX65_CX>,
-					<&rpmhpd SDX65_MSS>;
-			power-domain-names = "cx", "mss";
-
-			qcom,smem-states = <&modem_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
-				label = "mpss";
-				qcom,remote-pid = <1>;
-				mboxes = <&apcs 15>;
-			};
-		};
-
-		sdhc_1: mmc@8804000 {
-			compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0x08804000 0x1000>;
-			reg-names = "hc";
-			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		mem_noc: interconnect@9680000 {
-			compatible = "qcom,sdx65-mem-noc";
-			reg = <0x09680000 0x27200>;
-			#interconnect-cells = <1>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		usb: usb@a6f8800 {
-			compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
-			reg = <0x0a6f8800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
-				 <&gcc GCC_USB30_MASTER_CLK>,
-				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				 <&gcc GCC_USB30_SLEEP_CLK>;
-			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
-					"sleep";
-
-			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <200000000>;
-
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 18 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 19 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
-					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
-
-			power-domains = <&gcc USB30_GDSC>;
-
-			resets = <&gcc GCC_USB30_BCR>;
-
-			status = "disabled";
-
-			usb_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0x0a600000 0xcd00>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x1a0 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		restart@c264000 {
-			compatible = "qcom,pshold";
-			reg = <0x0c264000 0x1000>;
-		};
-
-		spmi_bus: qcom,spmi@c440000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0xc440000 0xd00>,
-				<0xc600000 0x2000000>,
-				<0xe600000 0x100000>,
-				<0xe700000 0xa0000>,
-				<0xc40a000 0x26000>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "periph_irq";
-			interrupt-controller;
-			#interrupt-cells = <4>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			qcom,channel = <0>;
-			qcom,ee = <0>;
-		};
-
-		tlmm: pinctrl@f100000 {
-			compatible = "qcom,sdx65-tlmm";
-			reg = <0xf100000 0x300000>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 109>;
-			interrupt-controller;
-			interrupt-parent = <&intc>;
-			#interrupt-cells = <2>;
-		};
-
-		pdc: interrupt-controller@b210000 {
-			compatible = "qcom,sdx65-pdc", "qcom,pdc";
-			reg = <0xb210000 0x10000>;
-			qcom,pdc-ranges = <0 147 52>, <52 266 32>;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&intc>;
-			interrupt-controller;
-		};
-
-		sram@1468f000 {
-			compatible = "qcom,sdx65-imem", "syscon", "simple-mfd";
-			reg = <0x1468f000 0x1000>;
-			ranges = <0x0 0x1468f000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			pil-reloc@94c {
-				compatible = "qcom,pil-reloc-info";
-				reg = <0x94c 0xc8>;
-			};
-		};
-
-		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500";
-			reg = <0x15000000 0x40000>;
-			#iommu-cells = <2>;
-			#global-interrupts = <1>;
-			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		intc: interrupt-controller@17800000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			interrupt-parent = <&intc>;
-			#interrupt-cells = <3>;
-			reg = <0x17800000 0x1000>,
-			      <0x17802000 0x1000>;
-		};
-
-		a7pll: clock@17808000 {
-			compatible = "qcom,sdx55-a7pll";
-			reg = <0x17808000 0x1000>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "bi_tcxo";
-			#clock-cells = <0>;
-		};
-
-		apcs: mailbox@17810000 {
-			compatible = "qcom,sdx55-apcs-gcc", "syscon";
-			reg = <0x17810000 0x2000>;
-			#mbox-cells = <1>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
-			clock-names = "ref", "pll", "aux";
-			#clock-cells = <0>;
-		};
-
-		watchdog@17817000 {
-			compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt";
-			reg = <0x17817000 0x1000>;
-			clocks = <&sleep_clk>;
-		};
-
-		timer@17820000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0x17820000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@17821000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 7 0x4>,
-					     <GIC_SPI 6 0x4>;
-				reg = <0x17821000 0x1000>,
-				      <0x17822000 0x1000>;
-			};
-
-			frame@17823000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 8 0x4>;
-				reg = <0x17823000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17824000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 9 0x4>;
-				reg = <0x17824000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17825000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 10 0x4>;
-				reg = <0x17825000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17826000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 11 0x4>;
-				reg = <0x17826000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17827000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 12 0x4>;
-				reg = <0x17827000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17828000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 13 0x4>;
-				reg = <0x17828000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17829000 {
-				frame-number = <7>;
-				interrupts = <GIC_SPI 14 0x4>;
-				reg = <0x17829000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		apps_rsc: rsc@17830000 {
-			label = "apps_rsc";
-			compatible = "qcom,rpmh-rsc";
-			reg = <0x17830000 0x10000>,
-			    <0x17840000 0x10000>;
-			reg-names = "drv-0", "drv-1";
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				   <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,tcs-offset = <0xd00>;
-			qcom,drv-id = <1>;
-			qcom,tcs-config = <ACTIVE_TCS  2>,
-				<SLEEP_TCS   2>,
-				<WAKE_TCS    2>,
-				<CONTROL_TCS 1>;
-
-			rpmhcc: clock-controller {
-				compatible = "qcom,sdx65-rpmh-clk";
-				#clock-cells = <1>;
-				clock-names = "xo";
-				clocks = <&xo_board>;
-			};
-
-			rpmhpd: power-controller {
-				compatible = "qcom,sdx65-rpmhpd";
-				#power-domain-cells = <1>;
-				operating-points-v2 = <&rpmhpd_opp_table>;
-
-				rpmhpd_opp_table: opp-table {
-					compatible = "operating-points-v2";
-
-					rpmhpd_opp_ret: opp1 {
-						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
-					};
-
-					rpmhpd_opp_min_svs: opp2 {
-						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-					};
-
-					rpmhpd_opp_low_svs: opp3 {
-						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					};
-
-					rpmhpd_opp_svs: opp4 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					};
-
-					rpmhpd_opp_svs_l1: opp5 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					};
-
-					rpmhpd_opp_nom: opp6 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					};
-
-					rpmhpd_opp_nom_l1: opp7 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					};
-
-					rpmhpd_opp_nom_l2: opp8 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
-					};
-
-					rpmhpd_opp_turbo: opp9 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					};
-
-					rpmhpd_opp_turbo_l1: opp10 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					};
-				};
-			};
-
-			apps_bcm_voter: bcm-voter {
-				compatible = "qcom,bcm-voter";
-			};
-
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			<1 12 0xf08>,
-			<1 10 0xf08>,
-			<1 11 0xf08>;
-		clock-frequency = <19200000>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
new file mode 100644
index 0000000000000..3dfb1c8cefb86
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_QCOM) += \
+	qcom-apq8016-sbc.dtb \
+	qcom-apq8026-asus-sparrow.dtb \
+	qcom-apq8026-huawei-sturgeon.dtb \
+	qcom-apq8026-lg-lenok.dtb \
+	qcom-apq8026-samsung-matisse-wifi.dtb \
+	qcom-apq8060-dragonboard.dtb \
+	qcom-apq8064-cm-qs600.dtb \
+	qcom-apq8064-ifc6410.dtb \
+	qcom-apq8064-sony-xperia-lagan-yuga.dtb \
+	qcom-apq8064-asus-nexus7-flo.dtb \
+	qcom-apq8074-dragonboard.dtb \
+	qcom-apq8084-ifc6540.dtb \
+	qcom-apq8084-mtp.dtb \
+	qcom-ipq4018-ap120c-ac.dtb \
+	qcom-ipq4018-ap120c-ac-bit.dtb \
+	qcom-ipq4018-jalapeno.dtb \
+	qcom-ipq4019-ap.dk01.1-c1.dtb \
+	qcom-ipq4019-ap.dk04.1-c1.dtb \
+	qcom-ipq4019-ap.dk04.1-c3.dtb \
+	qcom-ipq4019-ap.dk07.1-c1.dtb \
+	qcom-ipq4019-ap.dk07.1-c2.dtb \
+	qcom-ipq8064-ap148.dtb \
+	qcom-ipq8064-rb3011.dtb \
+	qcom-msm8226-samsung-s3ve3g.dtb \
+	qcom-msm8660-surf.dtb \
+	qcom-msm8916-samsung-e5.dtb \
+	qcom-msm8916-samsung-e7.dtb \
+	qcom-msm8916-samsung-grandmax.dtb \
+	qcom-msm8916-samsung-serranove.dtb \
+	qcom-msm8960-cdp.dtb \
+	qcom-msm8960-samsung-expressatt.dtb \
+	qcom-msm8974-lge-nexus5-hammerhead.dtb \
+	qcom-msm8974-sony-xperia-rhine-amami.dtb \
+	qcom-msm8974-sony-xperia-rhine-honami.dtb \
+	qcom-msm8974pro-fairphone-fp2.dtb \
+	qcom-msm8974pro-oneplus-bacon.dtb \
+	qcom-msm8974pro-samsung-klte.dtb \
+	qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
+	qcom-mdm9615-wp8548-mangoh-green.dtb \
+	qcom-sdx55-mtp.dtb \
+	qcom-sdx55-t55.dtb \
+	qcom-sdx55-telit-fn980-tlb.dtb \
+	qcom-sdx65-mtp.dtb
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8016-sbc.dts b/arch/arm/boot/dts/qcom/qcom-apq8016-sbc.dts
new file mode 100644
index 0000000000000..4ccd2dca74a25
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8016-sbc.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/apq8016-sbc.dts"
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
new file mode 100644
index 0000000000000..aa0e0e8d2a973
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+
+/ {
+	model = "ASUS ZenWatch 2";
+	compatible = "asus,sparrow", "qcom,apq8026";
+	chassis-type = "watch";
+	qcom,msm-id = <199 0x20000>;
+	qcom,board-id = <8 3005>;
+
+	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+		external_image_region: external-image@3100000 {
+			reg = <0x3100000 0x200000>;
+			no-map;
+		};
+		peripheral_region: peripheral@3300000 {
+			reg = <0x3300000 0x600000>;
+			no-map;
+		};
+		adsp_region: adsp@3900000 {
+			reg = <0x3900000 0x1400000>;
+			no-map;
+		};
+		modem_region: modem@4d00000 {
+			reg = <0x4d00000 0x1b00000>;
+			no-map;
+		};
+		modem_efs_region: modem-efs@7f00000 {
+			reg = <0x7f00000 0x100000>;
+			no-map;
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_default_state>;
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&blsp1_uart1_default_state>;
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_default_state>;
+
+		host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+		};
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+};
+
+&sdhc_3 {
+	status = "okay";
+
+	max-frequency = <100000000>;
+	non-removable;
+
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_hostwake_default_state>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1500000>;
+	qcom,fast-charge-current-limit = <350000>;
+	qcom,fast-charge-safe-voltage = <4430000>;
+	qcom,fast-charge-high-threshold-voltage = <4400000>;
+	qcom,auto-recharge-threshold-voltage = <4300000>;
+	qcom,minimum-input-voltage = <4400000>;
+};
+
+&tlmm {
+	blsp1_uart1_default_state: blsp1-uart1-default-state {
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "blsp_uart1";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	bluetooth_default_state: bluetooth-default-state {
+		pins = "gpio48", "gpio61";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	wlan_hostwake_default_state: wlan-hostwake-default-state {
+		pins = "gpio46";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wlan_regulator_default_state: wlan-regulator-default-state {
+		pins = "gpio35";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
new file mode 100644
index 0000000000000..de19640efe553
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+#include <dt-bindings/input/ti-drv260x.h>
+
+/delete-node/ &adsp_region;
+
+/ {
+	model = "Huawei Watch";
+	compatible = "huawei,sturgeon", "qcom,apq8026";
+	chassis-type = "watch";
+	qcom,msm-id = <199 0x20000>;
+	qcom,board-id = <8 4>;
+
+	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+
+		external_image_region: external-image@3100000 {
+			reg = <0x3100000 0x200000>;
+			no-map;
+		};
+
+		peripheral_region: peripheral@3300000 {
+			reg = <0x3300000 0x600000>;
+			no-map;
+		};
+
+		adsp_region: adsp@3900000 {
+			reg = <0x3900000 0x1400000>;
+			no-map;
+		};
+
+		modem_region: modem@4d00000 {
+			reg = <0x4d00000 0x1b00000>;
+			no-map;
+		};
+
+		modem_efs_region: modem-efs@7f00000 {
+			reg = <0x7f00000 0x100000>;
+			no-map;
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_default_state>;
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_i2c2 {
+	clock-frequency = <384000>;
+
+	status = "okay";
+
+	vibrator@5a {
+		compatible = "ti,drv2605";
+		reg = <0x5a>;
+		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+
+		mode = <DRV260X_ERM_MODE>;
+		library-sel = <DRV260X_ERM_LIB_D>;
+		vib-rated-mv = <2765>;
+		vib-overdrive-mv = <3525>;
+
+		pinctrl-0 = <&vibrator_default_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_i2c5 {
+	clock-frequency = <384000>;
+
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+		vio-supply = <&pm8226_lvs1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_default_state>;
+
+		syna,startup-delay-ms = <160>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&blsp1_uart4_default_state>;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a0-bt";
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_default_state>;
+
+		host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_3 {
+	max-frequency = <100000000>;
+	non-removable;
+
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_hostwake_default_state>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-voltage = <4370000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,minimum-input-voltage = <4350000>;
+	qcom,fast-charge-current-limit = <300000>;
+	qcom,fast-charge-safe-current = <600000>;
+	qcom,auto-recharge-threshold-voltage = <4240000>;
+};
+
+&tlmm {
+	blsp1_uart4_default_state: blsp1-uart4-default-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+		function = "blsp_uart4";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	bluetooth_default_state: bluetooth-default-state {
+		pins = "gpio63", "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	touch_default_state: touch-default-state {
+		irq-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio16";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	vibrator_default_state: vibrator-default-state {
+		pins = "gpio59", "gpio60";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	wlan_hostwake_default_state: wlan-hostwake-default-state {
+		pins = "gpio66";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wlan_regulator_default_state: wlan-regulator-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
new file mode 100644
index 0000000000000..b887e5361ec3a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+
+/ {
+	model = "LG G Watch R";
+	compatible = "lg,lenok", "qcom,apq8026";
+	chassis-type = "watch";
+	qcom,board-id = <132 0x0a>;
+	qcom,msm-id = <199 0x20000>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+
+		external_image_region: external-image@3100000 {
+			reg = <0x03100000 0x200000>;
+			no-map;
+		};
+
+		adsp_region: adsp@3300000 {
+			reg = <0x03300000 0x1400000>;
+			no-map;
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_default_state>;
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27421";
+		reg = <0x55>;
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+	clock-frequency = <384000>;
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l22>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&blsp1_uart4 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&blsp1_uart4_default_state>;
+
+	bluetooth {
+		compatible = "brcm,bcm43430a0-bt";
+
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_default_state>;
+
+		host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+};
+
+&sdhc_3 {
+	status = "okay";
+
+	max-frequency = <100000000>;
+	non-removable;
+
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_hostwake_default_state>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <450000>;
+	qcom,fast-charge-current-limit = <400000>;
+	qcom,fast-charge-safe-voltage = <4350000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4240000>;
+	qcom,minimum-input-voltage = <4450000>;
+};
+
+&tlmm {
+	blsp1_uart4_default_state: blsp1-uart4-default-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+		function = "blsp_uart4";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	bluetooth_default_state: bluetooth-default-state {
+		pins = "gpio47", "gpio48";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touch_pins: touch-state {
+		irq-pins {
+			pins = "gpio17";
+			function = "gpio";
+
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		reset-pins {
+			pins = "gpio16";
+			function = "gpio";
+
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	wlan_hostwake_default_state: wlan-hostwake-default-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wlan_regulator_default_state: wlan-regulator-default-state {
+		pins = "gpio46";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
new file mode 100644
index 0000000000000..884d99297d4cf
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -0,0 +1,519 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+	model = "Samsung Galaxy Tab 4 10.1";
+	compatible = "samsung,matisse-wifi", "qcom,apq8026";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		display0 = &framebuffer0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <1280>;
+			height = <800>;
+			stride = <(1280 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+			interrupts = <&tlmm 110 IRQ_TYPE_EDGE_FALLING>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <15>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-backlight {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&backlight_i2c_default_state>;
+		pinctrl-names = "default";
+
+		i2c-gpio,delay-us = <4>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		backlight@2c {
+			compatible = "ti,lp8556";
+			reg = <0x2c>;
+
+			dev-ctrl = /bits/ 8 <0x80>;
+			init-brt = /bits/ 8 <0x3f>;
+
+			pwms = <&backlight_pwm 0 100000>;
+			pwm-names = "lp8556";
+
+			rom-a0h {
+				rom-addr = /bits/ 8 <0xa0>;
+				rom-val = /bits/ 8 <0x44>;
+			};
+
+			rom-a1h {
+				rom-addr = /bits/ 8 <0xa1>;
+				rom-val = /bits/ 8 <0x6c>;
+			};
+
+			rom-a5h {
+				rom-addr = /bits/ 8 <0xa5>;
+				rom-val = /bits/ 8 <0x24>;
+			};
+		};
+	};
+
+	backlight_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+		clocks = <&mmcc CAMSS_GP0_CLK>;
+		pinctrl-0 = <&backlight_pwm_default_state>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_1p8v: regulator-tsp-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_1p8v";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en_default_state>;
+	};
+
+	reg_tsp_3p3v: regulator-tsp-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en1_default_state>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		mpss@8400000 {
+			reg = <0x08400000 0x1f00000>;
+			no-map;
+		};
+
+		mba@a300000 {
+			reg = <0x0a300000 0x100000>;
+			no-map;
+		};
+
+		reserved@cb00000 {
+			reg = <0x0cb00000 0x700000>;
+			no-map;
+		};
+
+		wcnss@d200000 {
+			reg = <0x0d200000 0x700000>;
+			no-map;
+		};
+
+		adsp_region: adsp@d900000 {
+			reg = <0x0d900000 0x1800000>;
+			no-map;
+		};
+
+		venus@f100000 {
+			reg = <0x0f100000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		reserved@fb00000 {
+			reg = <0x0fb00000 0x260000>;
+			no-map;
+		};
+
+		rfsa@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default_state>;
+
+		st,drdy-int-pin = <1>;
+
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_lvs1>;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	muic: usb-switch@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_int_default_state>;
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_int_rst_default_state>;
+
+		reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&reg_tsp_1p8v>;
+		vdda-supply = <&reg_tsp_3p3v>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+			regulator-always-on;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default_state: accel-int-default-state {
+		pins = "gpio54";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_i2c_default_state: backlight-i2c-default-state {
+		pins = "gpio20", "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_pwm_default_state: backlight-pwm-default-state {
+		pins = "gpio33";
+		function = "gp0_clk";
+	};
+
+	muic_int_default_state: muic-int-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default_state: tsp-en-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en1_default_state: tsp-en1-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default_state: tsp-int-rst-default-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
new file mode 100644
index 0000000000000..db4c791b2e2fb
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -0,0 +1,973 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include "qcom-msm8660.dtsi"
+
+/ {
+	model = "Qualcomm APQ8060 Dragonboard";
+	compatible = "qcom,apq8060-dragonboard", "qcom,msm8660";
+
+	aliases {
+		serial0 = &gsbi12_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Main power of the board: 3.7V */
+	vph: regulator-fixed {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-name = "VPH";
+		regulator-type = "voltage";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* GPIO controlled ethernet power regulator */
+	dragon_veth: xc622a331mrg {
+		compatible = "regulator-fixed";
+		regulator-name = "XC6222A331MR-G";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vph>;
+		gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_veth_gpios>;
+		regulator-always-on;
+	};
+
+	/* VDDvario fixed regulator */
+	dragon_vario: nds332p {
+		compatible = "regulator-fixed";
+		regulator-name = "NDS332P";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&pm8058_s3>;
+	};
+
+	/* This is a levelshifter for SDCC5 */
+	dragon_vio_txb: txb0104rgyr {
+		compatible = "regulator-fixed";
+		regulator-name = "Dragon SDCC levelshifter";
+		vin-supply = <&pm8058_l14>;
+		regulator-always-on;
+	};
+
+	/*
+	 * Capella CM3605 light and proximity sensor mounted directly
+	 * on the sensor board.
+	 */
+	cm3605 {
+		compatible = "capella,cm3605";
+		vdd-supply = <&pm8058_l14>; // 2.85V
+		aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>;
+		capella,aset-resistance-ohms = <100000>;
+		/* Trig on both edges - getting close or far away */
+		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
+		/* MPP05 analog input to the XOADC */
+		io-channels = <&xoadc 0x00 0x05>;
+		io-channel-names = "aout";
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
+	};
+};
+
+&ebi2 {
+	/* The EBI2 will instantiate first, then populate its children */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_ebi2_pins>;
+	status = "okay";
+
+	/*
+	 * An on-board SMSC LAN9221 chip for "debug ethernet",
+	 * which is actually just an ordinary ethernet on the
+	 * EBI2. This has a 25MHz chrystal next to it, so no
+	 * clocking is needed.
+	 */
+	ethernet@2,0 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <2 0x0 0x100>;
+		/*
+		 * The second interrupt is the PME interrupt
+		 * for network wakeup, connected to the TLMM.
+		 */
+		interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
+				    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+		vdd33a-supply = <&dragon_veth>;
+		vddvario-supply = <&dragon_vario>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_ethernet_gpios>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,force-external-phy;
+		smsc,irq-push-pull;
+
+		/*
+		 * SLOW chipselect config
+		 * Delay 9 cycles (140ns@64MHz) between SMSC
+		 * LAN9221 Ethernet controller reads and writes
+		 * on CS2.
+		 */
+		qcom,xmem-recovery-cycles = <0>;
+		qcom,xmem-write-hold-cycles = <3>;
+		qcom,xmem-write-delta-cycles = <31>;
+		qcom,xmem-read-delta-cycles = <28>;
+		qcom,xmem-write-wait-cycles = <9>;
+		qcom,xmem-read-wait-cycles = <9>;
+	};
+};
+
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi3_i2c_pins>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,cy8ctma340";
+		reg = <0x24>;
+		/* Certainly we can do at least 400 kHz */
+		clock-frequency = <400000>;
+		/* IRQ on GPIO61 called /CTP_INT */
+		interrupt-parent = <&tlmm>;
+		interrupts = <61 IRQ_TYPE_EDGE_FALLING>;
+		/*
+		 * The I2C bus is using a PCA9306 level translator from L16A
+		 * to L2B so these two voltages are needed and L16A is
+		 * kind of the IO voltage, however L16Aisn't really fed to
+		 * the TMA340, which relies entirely on L2B (PM8901 L2).
+		 */
+		vcpin-supply = <&pm8058_l16>;
+		vdd-supply = <&pm8901_l2>;
+		/* GPIO58, called WAKE_CTP */
+		reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+		active-interval-ms = <0>;
+		touch-timeout-ms = <255>;
+		lowpower-interval-ms = <10>;
+		bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_tma340_gpios>;
+	};
+};
+
+&gsbi8 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi8_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
+	status = "okay";
+
+	eeprom@52 {
+		/* A 16KiB Platform ID EEPROM on the CPU carrier board */
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		vcc-supply = <&pm8058_s3>;
+		pagesize = <64>;
+	};
+	wm8903: wm8903@1a {
+		/* This Woolfson Micro device has an unrouted interrupt line */
+		compatible = "wlf,wm8903";
+		reg = <0x1a>;
+
+		AVDD-supply = <&pm8058_l16>;
+		CPVDD-supply = <&pm8058_l16>;
+		DBVDD-supply = <&pm8058_s3>;
+		DCVDD-supply = <&pm8058_l0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		micdet-cfg = <0>;
+		micdet-delay = <100>;
+		gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+	};
+};
+
+&gsbi12 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi12_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi12_serial_pins>;
+	status = "okay";
+};
+
+&gsbi12_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
+	status = "okay";
+
+	ak8975@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+		interrupt-parent = <&pm8058_gpio>;
+		interrupts = <33 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_ak8975_gpios>;
+		vid-supply = <&pm8058_lvs0>; // 1.8V
+		vdd-supply = <&pm8058_l14>; // 2.85V
+	};
+	bmp085@77 {
+		compatible = "bosch,bmp085";
+		reg = <0x77>;
+		interrupt-parent = <&pm8058_gpio>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_bmp085_gpios>;
+		vddd-supply = <&pm8058_lvs0>; // 1.8V
+		vdda-supply = <&pm8058_l14>; // 2.85V
+	};
+	mpu3050@68 {
+		compatible = "invensense,mpu3050";
+		reg = <0x68>;
+		/*
+		 * GPIO17 is pulled high by a 10k
+		 * resistor to VLOGIC so needs to be
+		 * active low/falling edge.
+		 */
+		interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_mpu3050_gpios>;
+		vlogic-supply = <&pm8058_lvs0>; // 1.8V
+		vdd-supply = <&pm8058_l14>; // 2.85V
+
+		/*
+		 * The MPU-3050 acts as a hub for the
+		 * accelerometer.
+		 */
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			kxsd9@18 {
+				compatible = "kionix,kxsd9";
+				reg = <0x18>;
+				interrupt-parent = <&tlmm>;
+				interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_kxsd9_gpios>;
+				iovdd-supply = <&pm8058_lvs0>; // 1.8V
+				vdd-supply = <&pm8058_l14>; // 2.85V
+			};
+		};
+	};
+};
+
+&pm8058_gpio {
+	dragon_ethernet_gpios: ethernet-state {
+		pinconf {
+			pins = "gpio7";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_bmp085_gpios: bmp085-state {
+		pinconf {
+			pins = "gpio16";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_mpu3050_gpios: mpu3050-state {
+		pinconf {
+			pins = "gpio17";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_sdcc3_gpios: sdcc3-state {
+		pinconf {
+			pins = "gpio22";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_sdcc5_gpios: sdcc5-state {
+		pinconf {
+			pins = "gpio26";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_ak8975_gpios: ak8975-state {
+		pinconf {
+			pins = "gpio33";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_cm3605_gpios: cm3605-state {
+		/* Pin 34 connected to the proxy IRQ */
+		gpio34-pins {
+			pins = "gpio34";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+		/* Pin 35 connected to ASET */
+		gpio35-pins {
+			pins = "gpio35";
+			function = "normal";
+			output-high;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_veth_gpios: veth-state {
+		pinconf {
+			pins = "gpio40";
+			function = "normal";
+			bias-disable;
+			drive-push-pull;
+		};
+	};
+};
+
+&pm8058_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_MENU)
+		MATRIX_KEY(0, 2, KEY_1)
+		MATRIX_KEY(0, 3, KEY_4)
+		MATRIX_KEY(0, 4, KEY_7)
+		MATRIX_KEY(1, 0, KEY_UP)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_DOWN)
+		MATRIX_KEY(1, 3, KEY_5)
+		MATRIX_KEY(1, 3, KEY_8)
+		MATRIX_KEY(2, 0, KEY_HOME)
+		MATRIX_KEY(2, 1, KEY_REPLY)
+		MATRIX_KEY(2, 2, KEY_2)
+		MATRIX_KEY(2, 3, KEY_6)
+		MATRIX_KEY(3, 0, KEY_VOLUMEUP)
+		MATRIX_KEY(3, 1, KEY_RIGHT)
+		MATRIX_KEY(3, 2, KEY_3)
+		MATRIX_KEY(3, 3, KEY_9)
+		MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
+		MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
+		MATRIX_KEY(4, 1, KEY_BACK)
+		MATRIX_KEY(4, 2, KEY_CAMERA)
+		MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
+	>;
+	keypad,num-rows = <6>;
+	keypad,num-columns = <5>;
+};
+
+&pm8058_led48 {
+	/*
+	 * The keypad LED @0x48 is routed to
+	 * the sensor board where it is
+	 * connected to an infrared LED
+	 * SFH4650 (60mW, @850nm) next to the
+	 * ambient light and proximity sensor
+	 * Capella Microsystems CM3605.
+	 */
+	label = "pm8058:infrared:proximitysensor";
+	default-state = "off";
+	linux,default-trigger = "cm3605";
+	status = "okay";
+};
+
+&pm8058_led131 {
+	label = "pm8058:red";
+	color = <LED_COLOR_ID_RED>;
+	default-state = "off";
+	status = "okay";
+};
+
+&pm8058_led132 {
+	/*
+	 * This is actually green too on my
+	 * board, but documented as yellow.
+	 */
+	label = "pm8058:yellow";
+	color = <LED_COLOR_ID_YELLOW>;
+	default-state = "off";
+	linux,default-trigger = "mmc0";
+	status = "okay";
+};
+
+&pm8058_led133 {
+	label = "pm8058:green";
+	function = LED_FUNCTION_HEARTBEAT;
+	color = <LED_COLOR_ID_GREEN>;
+	default-state = "on";
+	linux,default-trigger = "heartbeat";
+	status = "okay";
+};
+
+&pm8058_mpps {
+	dragon_cm3605_mpps: cm3605-mpps-state {
+		pins = "mpp5";
+		function = "analog";
+		input-enable;
+		bias-high-impedance;
+		/* Let's use channel 5 */
+		qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
+		power-source = <PM8058_GPIO_S3>;
+	};
+};
+
+&rpm {
+	/*
+	 * Set up of the PMIC RPM regulators for this board
+	 * PM8901 supplies "preliminary regulators" whatever
+	 * that means
+	 */
+	regulators-0 {
+		vdd_l0-supply = <&pm8901_s4>;
+		vdd_l1-supply = <&vph>;
+		vdd_l2-supply = <&vph>;
+		vdd_l3-supply = <&vph>;
+		vdd_l4-supply = <&vph>;
+		vdd_l5-supply = <&vph>;
+		vdd_l6-supply = <&vph>;
+		/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
+		vdd_s2-supply = <&vph>;
+		vdd_s3-supply = <&vph>;
+		vdd_s4-supply = <&vph>;
+		lvs0_in-supply = <&pm8058_s3>;
+		lvs1_in-supply = <&pm8901_s4>;
+		lvs2_in-supply = <&pm8058_l0>;
+		lvs3_in-supply = <&pm8058_s2>;
+		mvs_in-supply = <&pm8058_s3>;
+
+		l0 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l1 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+		l2 {
+			/* TMA340 requires strictly 3.3V */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+		l3 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+		l4 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l6 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			bias-pull-down;
+		};
+
+		/* s0 and s1 are SAW regulators controlled over SPM */
+		s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* LVS0 thru 3 and mvs are just switches */
+		lvs0 {
+			regulator-always-on;
+		};
+		lvs1 { };
+		lvs2 { };
+		lvs3 { };
+		mvs { };
+
+	};
+
+	regulators-1 {
+		vdd_l0_l1_lvs-supply = <&pm8058_s3>;
+		vdd_l2_l11_l12-supply = <&vph>;
+		vdd_l3_l4_l5-supply = <&vph>;
+		vdd_l6_l7-supply = <&vph>;
+		vdd_l8-supply = <&vph>;
+		vdd_l9-supply = <&vph>;
+		vdd_l10-supply = <&vph>;
+		vdd_l13_l16-supply = <&pm8058_s4>;
+		vdd_l14_l15-supply = <&vph>;
+		vdd_l17_l18-supply = <&vph>;
+		vdd_l19_l20-supply = <&vph>;
+		vdd_l21-supply = <&pm8058_s3>;
+		vdd_l22-supply = <&pm8058_s3>;
+		vdd_l23_l24_l25-supply = <&pm8058_s3>;
+		vdd_s0-supply = <&vph>;
+		vdd_s1-supply = <&vph>;
+		vdd_s2-supply = <&vph>;
+		vdd_s3-supply = <&vph>;
+		vdd_s4-supply = <&vph>;
+		vdd_ncp-supply = <&vph>;
+
+		l0 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l4 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l6 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3600000>;
+			bias-pull-down;
+		};
+		l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3050000>;
+			bias-pull-down;
+		};
+		l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l10 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l11 {
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			bias-pull-down;
+		};
+		l12 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			bias-pull-down;
+		};
+		l13 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			bias-pull-down;
+		};
+		l14 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+		l15 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
+		l17 {
+			// 1.5V according to schematic
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l18 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			bias-pull-down;
+		};
+		l19 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			bias-pull-down;
+		};
+		l20 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l21 {
+			// 1.1 V according to schematic
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
+		l22 {
+			// 1.2 V according to schematic
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+		l23 {
+			// Unused
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l24 {
+			// Unused
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l25 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		s0 {
+			// regulator-min-microvolt = <500000>;
+			// regulator-max-microvolt = <1325000>;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s1 {
+			// regulator-min-microvolt = <500000>;
+			// regulator-max-microvolt = <1250000>;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s2 {
+			// 1.3 V according to schematic
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+		s4 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		/* LVS0 and LVS1 are just switches */
+		lvs0 {
+			bias-pull-down;
+		};
+		lvs1 {
+			bias-pull-down;
+		};
+
+		ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+/* Internal 3.69 GiB eMMC */
+&sdcc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc1_pins>;
+	vmmc-supply = <&pm8901_l5>;
+	vqmmc-supply = <&pm8901_lvs0>;
+	status = "okay";
+};
+
+/* External micro SD card, directly connected, pulled up to 2.85 V */
+&sdcc3 {
+	/* Enable SSBI GPIO 22 as input, use for card detect */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
+	cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8058_l14>;
+	status = "okay";
+};
+
+/*
+ * Second external micro SD card, using two TXB104RGYR levelshifters
+ * to lift from 1.8 V to 2.85 V
+ */
+&sdcc5 {
+	/* Enable SSBI GPIO 26 as input, use for card detect */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
+	cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8058_l14>;
+	vqmmc-supply = <&dragon_vio_txb>;
+	status = "okay";
+};
+
+&tlmm {
+	/* eMMC pins, all 8 data lines connected */
+	dragon_sdcc1_pins: sdcc1-state {
+		clk-pins {
+			pins = "gpio167"; /* SDC1 CLK */
+			function = "sdc1";
+			drive-strength = <16>;
+			bias-disable;
+		};
+		cmd-pins {
+			pins = "gpio168"; /* SDC1 CMD */
+			function = "sdc1";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+		data-pins {
+			/* SDC1 D0 to D7 */
+			pins = "gpio159", "gpio160", "gpio161", "gpio162",
+			     "gpio163", "gpio164", "gpio165", "gpio166";
+			function = "sdc1";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	/*
+	 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
+	 * configuration.
+	 */
+	dragon_sdcc3_pins: sdcc3-state {
+		clk-pins {
+			pins = "sdc3_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		cmd-pins {
+			pins = "sdc3_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		data-pins {
+			pins = "sdc3_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	/* Second SD card slot pins */
+	dragon_sdcc5_pins: sdcc5-state {
+		clk-pins {
+			pins = "gpio97"; /* SDC5 CLK */
+			function = "sdc5";
+			drive-strength = <16>;
+			bias-disable;
+		};
+		cmd-pins {
+			pins = "gpio95"; /* SDC5 CMD */
+			function = "sdc5";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+		data-pins {
+			/* SDC5 D0 to D3 */
+			pins = "gpio96", "gpio98", "gpio99", "gpio100";
+			function = "sdc5";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	dragon_gsbi3_i2c_pins: gsbi3-i2c-state {
+		pins = "gpio43", "gpio44";
+		function = "gsbi3";
+		drive-strength = <8>;
+		/* These have external pull-up 2.2kOhm to 1.8V */
+		bias-disable;
+	};
+
+	dragon_gsbi8_i2c_pins: gsbi8-i2c-state {
+		pins = "gpio64", "gpio65";
+		function = "gsbi8";
+		drive-strength = <16>;
+		/* These have external pull-up 2.2kOhm to 1.8V */
+		bias-disable;
+	};
+
+	dragon_gsbi12_i2c_pins: gsbi12-i2c-state {
+		pins = "gpio115", "gpio116";
+		function = "gsbi12";
+		drive-strength = <16>;
+		/* These have external pull-up 4.7kOhm to 1.8V */
+		bias-disable;
+	};
+
+	/* Primary serial port uart 0 pins */
+	dragon_gsbi12_serial_pins: gsbi12-serial-state {
+		tx-pins {
+			pins = "gpio117";
+			function = "gsbi12";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		rx-pins {
+			pins = "gpio118";
+			function = "gsbi12";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	dragon_ebi2_pins: ebi2-state {
+		/*
+		 * Pins used by EBI2 on the Dragonboard, actually only
+		 * CS2 is used by a real peripheral. CS0 is just
+		 * routed to a test point.
+		 */
+		mux0-pins {
+			pins =
+			    /* "gpio39", CS1A_N this is not good to mux */
+			    "gpio40", /* CS2A_N */
+			    "gpio134"; /* CS0_N testpoint TP29 */
+			function = "ebi2cs";
+		};
+		mux1-pins {
+			pins =
+			    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
+			    "gpio123", "gpio124", "gpio125", "gpio126",
+			    "gpio127", "gpio128", "gpio129", "gpio130",
+			    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
+			    "gpio135", "gpio136", "gpio137", "gpio138",
+			    "gpio139", "gpio140", "gpio141", "gpio142",
+			    "gpio143", "gpio144", "gpio145", "gpio146",
+			    "gpio147", "gpio148", "gpio149", "gpio150",
+			    "gpio151", /* EBI2_OE_N */
+			    "gpio153", /* EBI2_ADV */
+			    "gpio157"; /* EBI2_WE_N */
+			function = "ebi2";
+		};
+	};
+
+	/* Interrupt line for the KXSD9 accelerometer */
+	dragon_kxsd9_gpios: kxsd9-state {
+		pins = "gpio57"; /* IRQ line */
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	dragon_tma340_gpios: tma340-state {
+		reset-pins {
+			/* RESET line, TS_ATTN, WAKE_CTP */
+			pins = "gpio58";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-disable;
+		};
+		irq-pins {
+			pins = "gpio61"; /* IRQ line */
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&xoadc {
+	/* Reference voltage 2.2 V */
+	xoadc-ref-supply = <&pm8058_l18>;
+
+	/* Board-specific channels */
+	mpp5@5 {
+		/* Connected to AOUT of ALS sensor */
+		reg = <0x00 0x05>;
+	};
+	mpp6@6 {
+		/* Connected to test point TP43 */
+		reg = <0x00 0x06>;
+	};
+	mpp7@7 {
+		/* Connected to battery thermistor */
+		reg = <0x00 0x07>;
+	};
+	mpp8@8 {
+		/* Connected to battery ID detector */
+		reg = <0x00 0x08>;
+	};
+	mpp9@9 {
+		/* Connected to XO thermistor */
+		reg = <0x00 0x09>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
new file mode 100644
index 0000000000000..c57c27cd8a202
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+/ {
+	model = "Asus Nexus7(flo)";
+	compatible = "asus,nexus7-flo", "qcom,apq8064";
+	chassis-type = "tablet";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@88d00000 {
+			compatible = "ramoops";
+			reg = <0x88d00000 0x100000>;
+			record-size = <0x00020000>;
+			console-size = <0x00020000>;
+			ftrace-size = <0x00020000>;
+		};
+	};
+
+	ext_3p3v: regulator-ext-3p3v {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "ext_3p3v";
+		regulator-type = "voltage";
+		startup-delay-us = <0>;
+		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	soc {
+		sram@2a03f000 {
+			compatible = "qcom,apq8064-imem", "syscon", "simple-mfd";
+			reg = <0x2a03f000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+
+				mode-normal = <0x77665501>;
+				mode-bootloader = <0x77665500>;
+				mode-recovery = <0x77665502>;
+			};
+		};
+	};
+};
+
+&dsi0 {
+	vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
+	vdd-supply = <&pm8921_l8>;
+	vddio-supply = <&pm8921_lvs7>;
+	avdd-supply = <&pm8921_l11>;
+	status = "okay";
+
+	panel@0 {
+		reg = <0>;
+		compatible = "jdi,lt070me05000";
+
+		vddp-supply = <&pm8921_l17>;
+		iovcc-supply = <&pm8921_lvs7>;
+
+		enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+		dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+};
+
+&dsi0_in {
+	remote-endpoint = <&mdp_dsi1_out>;
+};
+
+&dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+	vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
+	status = "okay";
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi1_i2c {
+	status = "okay";
+	clock-frequency = <200000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+
+	bq27541@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+	};
+
+};
+
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	clock-frequency = <200000>;
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	trackpad@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&tlmm_pinmux>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&gsbi6 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi6_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi6_uart_4pins>;
+	status = "okay";
+};
+
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi7_serial {
+	status = "okay";
+};
+
+&mdp {
+	status = "okay";
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+&mdp_dsi1_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&rpm {
+	regulators {
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vin_lvs2-supply = <&pm8921_s1>;
+
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+		vdd_ncp-supply = <&pm8921_l6>;
+
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		/* msm otg HSUSB_VDDCX */
+		s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+		};
+
+		/*
+		 * msm_sdcc.1-sdc-vdd_io
+		 * tabla2x-slim-CDC_VDDA_RX
+		 * tabla2x-slim-CDC_VDDA_TX
+		 * tabla2x-slim-CDC_VDD_CP
+		 * tabla2x-slim-VDDIO_CDC
+		 */
+		s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
+			regulator-always-on;
+		};
+
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		/* mipi_dsi.1-dsi1_pll_vdda */
+		l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+		};
+
+		/* msm_otg-HSUSB_3p3 */
+		l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		/* msm_otg-HSUSB_1p8 */
+		l4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		/* msm_sdcc.1-sdc_vdd */
+		l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		/* mipi_dsi.1-dsi1_avdd */
+		l11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
+
+		/* pwm_power for backlight */
+		l17 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+
+		/* camera, qdsp6 */
+		l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		/*
+		 * tabla2x-slim-CDC_VDDA_A_1P2V
+		 * tabla2x-slim-VDDD_CDC_D
+		 */
+		l25 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
+		};
+
+		lvs1 {
+			bias-pull-down;
+		};
+
+		lvs4 {
+			bias-pull-down;
+		};
+
+		lvs5 {
+			bias-pull-down;
+		};
+
+		lvs6 {
+			bias-pull-down;
+		};
+		/*
+		 * mipi_dsi.1-dsi1_vddio
+		 * pil_riva-pll_vdd
+		 */
+		lvs7 {
+			bias-pull-down;
+		};
+	};
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
new file mode 100644
index 0000000000000..d6ecfd8addb7a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "CompuLab CM-QS600";
+	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sdcc4_pwrseq: pwrseq-sdcc4 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_default_gpios>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+	};
+
+	/* on board fixed 3.3v supply */
+	v3p3_fixed: regulator-v3p3 {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE V3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi1_i2c {
+	clock-frequency = <200000>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi7_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi7_uart_2pins>;
+	status = "okay";
+};
+
+&pcie {
+	vdda-supply = <&pm8921_s3>;
+	vdda_phy-supply = <&pm8921_lvs6>;
+	vdda_refclk-supply = <&v3p3_fixed>;
+	pinctrl-0 = <&pcie_pins>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pm8921_gpio {
+	wlan_default_gpios: wlan-gpios-state {
+		pinconf {
+			pins = "gpio43";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
+		};
+	};
+};
+
+&rpm {
+	regulators {
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s1>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		s3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <4800000>;
+		};
+
+		s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		l3 {
+			regulator-min-microvolt = <3050000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		l4 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l5 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		l23 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		lvs6 {
+			bias-pull-down;
+		};
+
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&v3p3_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&card_detect>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* WLAN */
+&sdcc4 {
+	status = "okay";
+	vmmc-supply = <&v3p3_fixed>;
+	vqmmc-supply = <&v3p3_fixed>;
+	mmc-pwrseq = <&sdcc4_pwrseq>;
+};
+
+&tlmm_pinmux {
+	card_detect: card_detect {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	pcie_pins: pcie_pinmux {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+		};
+		conf {
+			pins = "gpio27";
+			drive-strength = <12>;
+			bias-disable;
+		};
+	};
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb_hs3_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+&usb_hs4_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb4 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
new file mode 100644
index 0000000000000..96307550523aa
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Qualcomm APQ8064/IFC6410";
+	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
+		i2c0 = &gsbi1_i2c;
+		i2c1 = &gsbi2_i2c;
+		i2c2 = &gsbi3_i2c;
+		i2c3 = &gsbi4_i2c;
+		spi0 = &gsbi5_spi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&notify_led>;
+
+		led-user1 {
+			label = "apq8064:green:user1";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
+	sdcc4_pwrseq: pwrseq-sdcc4 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_default_gpios>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+	};
+
+	ext_3p3v: regulator-ext-3p3v {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "ext_3p3v";
+		regulator-type = "voltage";
+		startup-delay-us = <0>;
+		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi1_i2c {
+	clock-frequency = <200000>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	status = "okay";
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+/* CAM I2C MIPI-CSI connector */
+&gsbi4_i2c {
+	status = "okay";
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	status = "okay";
+};
+
+&gsbi5_spi {
+	num-cs = <1>;
+	cs-gpios = <&tlmm_pinmux 53 0>;
+	status = "okay";
+};
+
+&gsbi6 {
+	qcom,mode = <GSBI_PROT_UART_W_FC>;
+	status = "okay";
+};
+
+&gsbi6_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi6_uart_4pins>;
+	status = "okay";
+};
+
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi7_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi7_uart_2pins>;
+	status = "okay";
+};
+
+&hdmi {
+	core-vdda-supply = <&pm8921_hdmi_switch>;
+	hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&hdmi_in {
+	remote-endpoint = <&mdp_dtv_out>;
+};
+
+&hdmi_out {
+	remote-endpoint = <&hdmi_con>;
+};
+
+&hdmi_phy {
+	status = "okay";
+	core-vdda-supply = <&pm8921_hdmi_switch>;
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdp_dtv_out {
+	remote-endpoint = <&hdmi_in>;
+};
+
+&pcie {
+	status = "okay";
+	vdda-supply = <&pm8921_s3>;
+	vdda_phy-supply = <&pm8921_lvs6>;
+	vdda_refclk-supply = <&ext_3p3v>;
+	pinctrl-0 = <&pcie_pins>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+};
+
+&pm8921_gpio {
+	wlan_default_gpios: wlan-gpios-state {
+		pinconf {
+			pins = "gpio43";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
+		};
+	};
+
+	notify_led: nled-state {
+		pinconf {
+			pins = "gpio18";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
+		};
+	};
+};
+
+&rpm {
+	regulators {
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s1>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		s3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <4800000>;
+		};
+
+		s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		l3 {
+			regulator-min-microvolt = <3050000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		l4 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l5 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l23 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		lvs1 {
+			bias-pull-down;
+		};
+
+		lvs6 {
+			bias-pull-down;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata0 {
+	target-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&card_detect>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* WLAN */
+&sdcc4 {
+	vmmc-supply = <&ext_3p3v>;
+	vqmmc-supply = <&pm8921_lvs1>;
+	mmc-pwrseq = <&sdcc4_pwrseq>;
+	status = "okay";
+};
+
+&tlmm_pinmux {
+	card_detect: card_detect {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	pcie_pins: pcie_pinmux {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+		};
+		conf {
+			pins = "gpio27";
+			drive-strength = <12>;
+			bias-disable;
+		};
+	};
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb_hs3_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+&usb_hs4_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb4 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
new file mode 100644
index 0000000000000..b4d286a6fab1c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&tlmm_pinmux {
+	sdc4_gpios: sdc4-gpios {
+		pios {
+			pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+			function = "sdc4";
+		};
+	};
+
+	sdcc1_pins: sdcc1-pin-active {
+		clk {
+			pins = "sdc1_clk";
+			drive-strengh = <16>;
+			bias-disable;
+		};
+
+		cmd {
+			pins = "sdc1_cmd";
+			drive-strengh = <10>;
+			bias-pull-up;
+		};
+
+		data {
+			pins = "sdc1_data";
+			drive-strengh = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdcc3_pins: sdcc3-pin-active {
+		clk {
+			pins = "sdc3_clk";
+			drive-strengh = <8>;
+			bias-disable;
+		};
+
+		cmd {
+			pins = "sdc3_cmd";
+			drive-strengh = <8>;
+			bias-pull-up;
+		};
+
+		data {
+			pins = "sdc3_data";
+			drive-strengh = <8>;
+			bias-pull-up;
+		};
+	};
+
+	ps_hold: ps_hold {
+		mux {
+			pins = "gpio78";
+			function = "ps_hold";
+		};
+	};
+
+	i2c1_pins: i2c1 {
+		mux {
+			pins = "gpio20", "gpio21";
+			function = "gsbi1";
+		};
+
+		pinconf {
+			pins = "gpio20", "gpio21";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_sleep: i2c1_pins_sleep {
+		mux {
+			pins = "gpio20", "gpio21";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio20", "gpio21";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	gsbi1_uart_2pins: gsbi1_uart_2pins {
+		mux {
+			pins = "gpio18", "gpio19";
+			function = "gsbi1";
+		};
+	};
+
+	gsbi1_uart_4pins: gsbi1_uart_4pins {
+		mux {
+			pins = "gpio18", "gpio19", "gpio20", "gpio21";
+			function = "gsbi1";
+		};
+	};
+
+	i2c2_pins: i2c2 {
+		mux {
+			pins = "gpio24", "gpio25";
+			function = "gsbi2";
+		};
+
+		pinconf {
+			pins = "gpio24", "gpio25";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_sleep: i2c2_pins_sleep {
+		mux {
+			pins = "gpio24", "gpio25";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio24", "gpio25";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	i2c3_pins: i2c3 {
+		mux {
+			pins = "gpio8", "gpio9";
+			function = "gsbi3";
+		};
+
+		pinconf {
+			pins = "gpio8", "gpio9";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c3_pins_sleep: i2c3_pins_sleep {
+		mux {
+			pins = "gpio8", "gpio9";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio8", "gpio9";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	i2c4_pins: i2c4 {
+		mux {
+			pins = "gpio12", "gpio13";
+			function = "gsbi4";
+		};
+
+		pinconf {
+			pins = "gpio12", "gpio13";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c4_pins_sleep: i2c4_pins_sleep {
+		mux {
+			pins = "gpio12", "gpio13";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio12", "gpio13";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	spi5_default: spi5_default {
+		pinmux {
+			pins = "gpio51", "gpio52", "gpio54";
+			function = "gsbi5";
+		};
+
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio53";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio54";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		pinconf_cs {
+			pins = "gpio53";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi5_sleep: spi5_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	i2c6_pins: i2c6 {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "gsbi6";
+		};
+
+		pinconf {
+			pins = "gpio16", "gpio17";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c6_pins_sleep: i2c6_pins_sleep {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio16", "gpio17";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	gsbi6_uart_2pins: gsbi6_uart_2pins {
+		mux {
+			pins = "gpio14", "gpio15";
+			function = "gsbi6";
+		};
+	};
+
+	gsbi6_uart_4pins: gsbi6_uart_4pins {
+		mux {
+			pins = "gpio14", "gpio15", "gpio16", "gpio17";
+			function = "gsbi6";
+		};
+	};
+
+	gsbi7_uart_2pins: gsbi7_uart_2pins {
+		mux {
+			pins = "gpio82", "gpio83";
+			function = "gsbi7";
+		};
+	};
+
+	gsbi7_uart_4pins: gsbi7_uart_4pins {
+		mux {
+			pins = "gpio82", "gpio83", "gpio84", "gpio85";
+			function = "gsbi7";
+		};
+	};
+
+	i2c7_pins: i2c7 {
+		mux {
+			pins = "gpio84", "gpio85";
+			function = "gsbi7";
+		};
+
+		pinconf {
+			pins = "gpio84", "gpio85";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c7_pins_sleep: i2c7_pins_sleep {
+		mux {
+			pins = "gpio84", "gpio85";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio84", "gpio85";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	riva_fm_pin_a: riva-fm-active {
+		pins = "gpio14", "gpio15";
+		function = "riva_fm";
+	};
+
+	riva_bt_pin_a: riva-bt-active {
+		pins = "gpio16", "gpio17";
+		function = "riva_bt";
+	};
+
+	riva_wlan_pin_a: riva-wlan-active {
+		pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+		function = "riva_wlan";
+
+		drive-strength = <6>;
+		bias-pull-down;
+	};
+
+	hdmi_pinctrl: hdmi-pinctrl {
+		mux {
+			pins = "gpio70", "gpio71", "gpio72";
+			function = "hdmi";
+		};
+
+		pinconf_ddc {
+			pins = "gpio70", "gpio71";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf_hpd {
+			pins = "gpio72";
+			bias-pull-down;
+			drive-strength = <16>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
new file mode 100644
index 0000000000000..9244512b74d1e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia Z";
+	compatible = "sony,xperia-yuga", "qcom,apq8064";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &gsbi5_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi5_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi5_uart_pin_a>;
+	status = "okay";
+};
+
+&pm8921_gpio {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio3", "gpio4", "gpio29", "gpio35";
+		function = "normal";
+
+		bias-pull-up;
+		drive-push-pull;
+		input-enable;
+		power-source = <2>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		qcom,pull-up-strength = <0>;
+	};
+};
+
+&riva {
+	pinctrl-names = "default";
+	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+	status = "okay";
+};
+
+&rpm {
+	regulators {
+		vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vin_lvs_1_3_6-supply = <&pm8921_s4>;
+		vin_lvs_4_5_7-supply = <&pm8921_s4>;
+		vin_ncp-supply = <&pm8921_l6>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_l24-supply = <&pm8921_s1>;
+		vin_l25-supply = <&pm8921_s1>;
+		vin_l27-supply = <&pm8921_s7>;
+		vin_l28-supply = <&pm8921_s7>;
+
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		s8 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+
+		/* PMOS LDO */
+		l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			bias-pull-down;
+		};
+
+		l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
+
+		l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		l10 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			bias-pull-down;
+		};
+
+		l11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		l12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
+
+		l17 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2000000>;
+			bias-pull-down;
+		};
+
+		l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		l21 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		l22 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+
+		l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
+		};
+
+		l27 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		l28 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		l29 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2000000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		lvs1 {
+			bias-pull-down;
+		};
+
+		lvs2 {
+			bias-pull-down;
+		};
+
+		lvs3 {
+			bias-pull-down;
+		};
+
+		lvs4 {
+			bias-pull-down;
+		};
+
+		lvs5 {
+			bias-pull-down;
+		};
+
+		lvs6 {
+			bias-pull-down;
+		};
+
+		lvs7 {
+			bias-pull-down;
+		};
+
+		usb-switch {};
+
+		hdmi-switch {};
+
+		ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
+
+	status = "okay";
+};
+
+&tlmm_pinmux {
+	gsbi5_uart_pin_a: gsbi5-uart-pin-active {
+		rx {
+			pins = "gpio52";
+			function = "gsbi5";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		tx {
+			pins = "gpio51";
+			function = "gsbi5";
+			drive-strength = <4>;
+			bias-disable;
+		};
+	};
+
+
+	sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+		pins = "gpio26";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064-v2.0.dtsi
new file mode 100644
index 0000000000000..46ed48f0244f2
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-v2.0.dtsi
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8064.dtsi"
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
new file mode 100644
index 0000000000000..d2289205ff812
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -0,0 +1,1896 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm APQ8064";
+	compatible = "qcom,apq8064";
+	interrupt-parent = <&intc>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_region: smem@80000000 {
+			reg = <0x80000000 0x200000>;
+			no-map;
+		};
+
+		wcnss_mem: wcnss@8f000000 {
+			reg = <0x8f000000 0x700000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		CPU1: cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		CPU2: cpu@2 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		CPU3: cpu@3 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			CPU_SPC: spc {
+				compatible = "qcom,idle-state-spc",
+						"arm,idle-state";
+				entry-latency-us = <400>;
+				exit-latency-us = <900>;
+				min-residency-us = <3000>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 10>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+	};
+
+	clocks {
+		cxo_board: cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		pxo_board: pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	sfpb_mutex: hwmutex {
+		compatible = "qcom,sfpb-mutex";
+		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
+		#hwlock-cells = <1>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+
+		hwlocks = <&sfpb_mutex 3>;
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		modem-edge {
+			interrupts = <0 37 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&l2cc 8 3>;
+			qcom,smd-edge = <0>;
+
+			status = "disabled";
+		};
+
+		q6-edge {
+			interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&l2cc 8 15>;
+			qcom,smd-edge = <1>;
+
+			status = "disabled";
+		};
+
+		dsps-edge {
+			interrupts = <0 138 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&sps_sic_non_secure 0x4080 0>;
+			qcom,smd-edge = <3>;
+
+			status = "disabled";
+		};
+
+		riva-edge {
+			interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&l2cc 8 25>;
+			qcom,smd-edge = <6>;
+
+			status = "disabled";
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&l2cc 8 4>;
+		qcom,ipc-2 = <&l2cc 8 14>;
+		qcom,ipc-3 = <&l2cc 8 23>;
+		qcom,ipc-4 = <&sps_sic_non_secure 0x4094 0>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <0 38 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		q6_smsm: q6@2 {
+			reg = <2>;
+			interrupts = <0 89 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@3 {
+			reg = <3>;
+			interrupts = <0 204 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		dsps_smsm: dsps@4 {
+			reg = <4>;
+			interrupts = <0 137 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-apq8064", "qcom,scm";
+
+			clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
+			clock-names = "core";
+		};
+	};
+
+
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&xoadc 0x00 0x01>, /* Battery */
+			    <&xoadc 0x00 0x02>, /* DC in (charger) */
+			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
+			    <&xoadc 0x00 0x0b>, /* Die temperature */
+			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			    <&xoadc 0x00 0x0e>; /* Charger temperature */
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		tlmm_pinmux: pinctrl@800000 {
+			compatible = "qcom,apq8064-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			gpio-ranges = <&tlmm_pinmux 0 0 90>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&ps_hold>;
+		};
+
+		sfpb_wrapper_mutex: syscon@1200000 {
+			compatible = "syscon";
+			reg = <0x01200000 0x8000>;
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-wdt-apq8064", "qcom,kpss-timer",
+				     "qcom,msm-timer";
+			interrupts = <1 1 0x301>,
+				     <1 2 0x301>,
+				     <1 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>;
+			cpu-offset = <0x80000>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu0_aux";
+			#clock-cells = <0>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
+		};
+
+		acc2: clock-controller@20a8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu2_aux";
+			#clock-cells = <0>;
+		};
+
+		acc3: clock-controller@20b8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu3_aux";
+			#clock-cells = <0>;
+		};
+
+		saw0: power-controller@2089000 {
+			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: power-controller@2099000 {
+			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw2: power-controller@20a9000 {
+			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw3: power-controller@20b9000 {
+			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		sps_sic_non_secure: sps-sic-non-secure@12100000 {
+			compatible = "syscon";
+			reg = <0x12100000 0x10000>;
+		};
+
+		gsbi1: gsbi@12440000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <1>;
+			reg = <0x12440000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi1_serial: serial@12450000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x12450000 0x100>,
+				      <0x12400000 0x03>;
+				interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi1_i2c: i2c@12460000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-1 = <&i2c1_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x12460000 0x1000>;
+				interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+		};
+
+		gsbi2: gsbi@12480000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <2>;
+			reg = <0x12480000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi2_i2c: i2c@124a0000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x124a0000 0x1000>;
+				pinctrl-0 = <&i2c2_pins>;
+				pinctrl-1 = <&i2c2_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <3>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			gsbi3_i2c: i2c@16280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c3_pins>;
+				pinctrl-1 = <&i2c3_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI3_QUP_CLK>,
+					 <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi4: gsbi@16300000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x03>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi4_i2c: i2c@16380000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c4_pins>;
+				pinctrl-1 = <&i2c4_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16380000 0x1000>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI4_QUP_CLK>,
+					 <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x1a200000 0x03>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi5_serial: serial@1a240000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a240000 0x100>,
+				      <0x1a200000 0x03>;
+				interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi5_spi: spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi5_default>;
+				pinctrl-1 = <&spi5_sleep>;
+				pinctrl-names = "default", "sleep";
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi6: gsbi@16500000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <6>;
+			reg = <0x16500000 0x03>;
+			clocks = <&gcc GSBI6_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi6_serial: serial@16540000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16540000 0x100>,
+				      <0x16500000 0x03>;
+				interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi6_i2c: i2c@16580000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c6_pins>;
+				pinctrl-1 = <&i2c6_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI6_QUP_CLK>,
+					 <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi7: gsbi@16600000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <7>;
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			syscon-tcsr = <&tcsr>;
+
+			gsbi7_serial: serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi7_i2c: i2c@16680000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c7_pins>;
+				pinctrl-1 = <&i2c7_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16680000 0x1000>;
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_QUP_CLK>,
+					 <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
+		ssbi@c00000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00c00000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pm8821: pmic {
+				compatible = "qcom,pm8821";
+				interrupt-parent = <&tlmm_pinmux>;
+				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pm8821_mpps: mpps@50 {
+					compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+					reg = <0x50>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pm8821_mpps 0 0 4>;
+				};
+			};
+		};
+
+		ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic {
+				compatible = "qcom,pm8921";
+				interrupt-parent = <&tlmm_pinmux>;
+				interrupts = <74 8>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pm8921_gpio: gpio@150 {
+
+					compatible = "qcom,pm8921-gpio",
+						     "qcom,ssbi-gpio";
+					reg = <0x150>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					gpio-ranges = <&pm8921_gpio 0 0 44>;
+					#gpio-cells = <2>;
+
+				};
+
+				pm8921_mpps: mpps@50 {
+					compatible = "qcom,pm8921-mpp",
+						     "qcom,ssbi-mpp";
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pm8921_mpps 0 0 12>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8921-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 1>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+
+				pwrkey@1c {
+					compatible = "qcom,pm8921-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 1>, <51 1>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				xoadc: xoadc@197 {
+					compatible = "qcom,pm8921-adc";
+					reg = <197>;
+					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+					#io-channel-cells = <2>;
+
+					vcoin: adc-channel@0 {
+						reg = <0x00 0x00>;
+					};
+					vbat: adc-channel@1 {
+						reg = <0x00 0x01>;
+					};
+					dcin: adc-channel@2 {
+						reg = <0x00 0x02>;
+					};
+					vph_pwr: adc-channel@4 {
+						reg = <0x00 0x04>;
+					};
+					batt_therm: adc-channel@8 {
+						reg = <0x00 0x08>;
+					};
+					batt_id: adc-channel@9 {
+						reg = <0x00 0x09>;
+					};
+					usb_vbus: adc-channel@a {
+						reg = <0x00 0x0a>;
+					};
+					die_temp: adc-channel@b {
+						reg = <0x00 0x0b>;
+					};
+					ref_625mv: adc-channel@c {
+						reg = <0x00 0x0c>;
+					};
+					ref_1250mv: adc-channel@d {
+						reg = <0x00 0x0d>;
+					};
+					chg_temp: adc-channel@e {
+						reg = <0x00 0x0e>;
+					};
+					ref_muxoff: adc-channel@f {
+						reg = <0x00 0x0f>;
+					};
+				};
+			};
+		};
+
+		qfprom: qfprom@700000 {
+			compatible = "qcom,apq8064-qfprom", "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			tsens_calib: calib@404 {
+				reg = <0x404 0x10>;
+			};
+			tsens_backup: backup_calib@414 {
+				reg = <0x414 0x10>;
+			};
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-apq8064", "syscon";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&cxo_board>,
+				 <&pxo_board>,
+				 <&lcc PLL4>;
+			clock-names = "cxo", "pxo", "pll4";
+
+			tsens: thermal-sensor {
+				compatible = "qcom,msm8960-tsens";
+
+				nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+				nvmem-cell-names = "calib", "calib_backup";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uplow";
+
+				#qcom,sensors = <11>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-apq8064";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL4_VOTE>,
+				 <0>,
+				 <0>, <0>,
+				 <0>, <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll4_vote",
+				      "mi2s_codec_clk",
+				      "codec_i2s_mic_codec_clk",
+				      "spare_i2s_mic_codec_clk",
+				      "codec_i2s_spkr_codec_clk",
+				      "spare_i2s_spkr_codec_clk",
+				      "pcm_codec_clk";
+		};
+
+		mmcc: clock-controller@4000000 {
+			compatible = "qcom,mmcc-apq8064";
+			reg = <0x4000000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL3>,
+				 <&gcc PLL8_VOTE>,
+				 <&dsi0_phy 1>,
+				 <&dsi0_phy 0>,
+				 <&dsi1_phy 1>,
+				 <&dsi1_phy 0>,
+				 <&hdmi_phy>;
+			clock-names = "pxo",
+				      "pll3",
+				      "pll8_vote",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "dsi2pll",
+				      "dsi2pllbyte",
+				      "hdmipll";
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible = "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc", "syscon";
+			reg = <0x2011000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
+		};
+
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-apq8064";
+			reg = <0x108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
+				#clock-cells = <1>;
+				clocks = <&pxo_board>, <&cxo_board>;
+				clock-names = "pxo", "cxo";
+			};
+
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+
+				pm8921_s1: s1 {};
+				pm8921_s2: s2 {};
+				pm8921_s3: s3 {};
+				pm8921_s4: s4 {};
+				pm8921_s7: s7 {};
+				pm8921_s8: s8 {};
+
+				pm8921_l1: l1 {};
+				pm8921_l2: l2 {};
+				pm8921_l3: l3 {};
+				pm8921_l4: l4 {};
+				pm8921_l5: l5 {};
+				pm8921_l6: l6 {};
+				pm8921_l7: l7 {};
+				pm8921_l8: l8 {};
+				pm8921_l9: l9 {};
+				pm8921_l10: l10 {};
+				pm8921_l11: l11 {};
+				pm8921_l12: l12 {};
+				pm8921_l14: l14 {};
+				pm8921_l15: l15 {};
+				pm8921_l16: l16 {};
+				pm8921_l17: l17 {};
+				pm8921_l18: l18 {};
+				pm8921_l21: l21 {};
+				pm8921_l22: l22 {};
+				pm8921_l23: l23 {};
+				pm8921_l24: l24 {};
+				pm8921_l25: l25 {};
+				pm8921_l26: l26 {};
+				pm8921_l27: l27 {};
+				pm8921_l28: l28 {};
+				pm8921_l29: l29 {};
+
+				pm8921_lvs1: lvs1 {};
+				pm8921_lvs2: lvs2 {};
+				pm8921_lvs3: lvs3 {};
+				pm8921_lvs4: lvs4 {};
+				pm8921_lvs5: lvs5 {};
+				pm8921_lvs6: lvs6 {};
+				pm8921_lvs7: lvs7 {};
+
+				pm8921_usb_switch: usb-switch {};
+
+				pm8921_hdmi_switch: hdmi-switch {
+					bias-pull-down;
+				};
+
+				pm8921_ncp: ncp {};
+			};
+		};
+
+		usb1: usb@12500000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x12500000 0x200>,
+			      <0x12500200 0x200>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
+			assigned-clock-rates = <60000000>;
+			resets = <&gcc USB_HS1_RESET>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			ahb-burst-config = <0>;
+			phys = <&usb_hs1_phy>;
+			phy-names = "usb-phy";
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs1_phy: phy {
+					compatible = "qcom,usb-hs-phy-apq8064",
+						     "qcom,usb-hs-phy";
+					clocks = <&sleep_clk>, <&cxo_board>;
+					clock-names = "sleep", "ref";
+					resets = <&usb1 0>;
+					reset-names = "por";
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		usb3: usb@12520000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x12520000 0x200>,
+			      <0x12520200 0x200>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc USB_HS3_XCVR_CLK>;
+			assigned-clock-rates = <60000000>;
+			resets = <&gcc USB_HS3_RESET>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			ahb-burst-config = <0>;
+			phys = <&usb_hs3_phy>;
+			phy-names = "usb-phy";
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs3_phy: phy {
+					compatible = "qcom,usb-hs-phy-apq8064",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&sleep_clk>, <&cxo_board>;
+					clock-names = "sleep", "ref";
+					resets = <&usb3 0>;
+					reset-names = "por";
+				};
+			};
+		};
+
+		usb4: usb@12530000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x12530000 0x200>,
+			      <0x12530200 0x200>;
+			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc USB_HS4_XCVR_CLK>;
+			assigned-clock-rates = <60000000>;
+			resets = <&gcc USB_HS4_RESET>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			ahb-burst-config = <0>;
+			phys = <&usb_hs4_phy>;
+			phy-names = "usb-phy";
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs4_phy: phy {
+					compatible = "qcom,usb-hs-phy-apq8064",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&sleep_clk>, <&cxo_board>;
+					clock-names = "sleep", "ref";
+					resets = <&usb4 0>;
+					reset-names = "por";
+				};
+			};
+		};
+
+		sata_phy0: phy@1b400000 {
+			compatible = "qcom,apq8064-sata-phy";
+			status = "disabled";
+			reg = <0x1b400000 0x200>;
+			reg-names = "phy_mem";
+			clocks = <&gcc SATA_PHY_CFG_CLK>;
+			clock-names = "cfg";
+			#phy-cells = <0>;
+		};
+
+		sata0: sata@29000000 {
+			compatible = "qcom,apq8064-ahci", "generic-ahci";
+			status	 = "disabled";
+			reg	 = <0x29000000 0x180>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc SFAB_SATA_S_H_CLK>,
+				 <&gcc SATA_H_CLK>,
+				 <&gcc SATA_A_CLK>,
+				 <&gcc SATA_RXOOB_CLK>,
+				 <&gcc SATA_PMALIVE_CLK>;
+			clock-names = "slave_iface",
+				      "iface",
+				      "bus",
+				      "rxoob",
+				      "core_pmalive";
+
+			assigned-clocks = <&gcc SATA_RXOOB_CLK>,
+					  <&gcc SATA_PMALIVE_CLK>;
+			assigned-clock-rates = <100000000>, <100000000>;
+
+			phys = <&sata_phy0>;
+			phy-names = "sata-phy";
+			ports-implemented = <0x1>;
+		};
+
+		sdcc3: mmc@12180000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12180000 0x2000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <192000000>;
+			no-1-8-v;
+			dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+			dma-names = "tx", "rx";
+		};
+
+		sdcc3bam: dma-controller@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc4: mmc@121c0000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x121c0000 0x2000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <48000000>;
+			dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdc4_gpios>;
+		};
+
+		sdcc4bam: dma-controller@121c2000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x121c2000 0x8000>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC4_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc1: mmc@12400000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdcc1_pins>;
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12400000 0x2000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <96000000>;
+			non-removable;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+		};
+
+		sdcc1bam: dma-controller@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-apq8064", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		gpu: adreno-3xx@4300000 {
+			compatible = "qcom,adreno-320.2", "qcom,adreno";
+			reg = <0x04300000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names =
+			    "core",
+			    "iface",
+			    "mem",
+			    "mem_iface";
+			clocks =
+			    <&mmcc GFX3D_CLK>,
+			    <&mmcc GFX3D_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>,
+			    <&mmcc MMSS_IMEM_AHB_CLK>;
+
+			iommus = <&gfx3d 0
+				  &gfx3d 1
+				  &gfx3d 2
+				  &gfx3d 3
+				  &gfx3d 4
+				  &gfx3d 5
+				  &gfx3d 6
+				  &gfx3d 7
+				  &gfx3d 8
+				  &gfx3d 9
+				  &gfx3d 10
+				  &gfx3d 11
+				  &gfx3d 12
+				  &gfx3d 13
+				  &gfx3d 14
+				  &gfx3d 15
+				  &gfx3d 16
+				  &gfx3d 17
+				  &gfx3d 18
+				  &gfx3d 19
+				  &gfx3d 20
+				  &gfx3d 21
+				  &gfx3d 22
+				  &gfx3d 23
+				  &gfx3d 24
+				  &gfx3d 25
+				  &gfx3d 26
+				  &gfx3d 27
+				  &gfx3d 28
+				  &gfx3d 29
+				  &gfx3d 30
+				  &gfx3d 31
+				  &gfx3d1 0
+				  &gfx3d1 1
+				  &gfx3d1 2
+				  &gfx3d1 3
+				  &gfx3d1 4
+				  &gfx3d1 5
+				  &gfx3d1 6
+				  &gfx3d1 7
+				  &gfx3d1 8
+				  &gfx3d1 9
+				  &gfx3d1 10
+				  &gfx3d1 11
+				  &gfx3d1 12
+				  &gfx3d1 13
+				  &gfx3d1 14
+				  &gfx3d1 15
+				  &gfx3d1 16
+				  &gfx3d1 17
+				  &gfx3d1 18
+				  &gfx3d1 19
+				  &gfx3d1 20
+				  &gfx3d1 21
+				  &gfx3d1 22
+				  &gfx3d1 23
+				  &gfx3d1 24
+				  &gfx3d1 25
+				  &gfx3d1 26
+				  &gfx3d1 27
+				  &gfx3d1 28
+				  &gfx3d1 29
+				  &gfx3d1 30
+				  &gfx3d1 31>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+				};
+
+				opp-27000000 {
+					opp-hz = /bits/ 64 <27000000>;
+				};
+			};
+		};
+
+		mmss_sfpb: syscon@5700000 {
+			compatible = "syscon";
+			reg = <0x5700000 0x70>;
+		};
+
+		dsi0: dsi@4700000 {
+			compatible = "qcom,apq8064-dsi-ctrl",
+				     "qcom,mdss-dsi-ctrl";
+			label = "MDSS DSI CTRL->0";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x04700000 0x200>;
+			reg-names = "dsi_ctrl";
+
+			clocks = <&mmcc DSI_M_AHB_CLK>,
+				<&mmcc DSI_S_AHB_CLK>,
+				<&mmcc AMP_AHB_CLK>,
+				<&mmcc DSI_CLK>,
+				<&mmcc DSI1_BYTE_CLK>,
+				<&mmcc DSI_PIXEL_CLK>,
+				<&mmcc DSI1_ESC_CLK>;
+			clock-names = "iface", "bus", "core_mmss",
+					"src", "byte", "pixel",
+					"core";
+
+			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
+					<&mmcc DSI1_ESC_SRC>,
+					<&mmcc DSI_SRC>,
+					<&mmcc DSI_PIXEL_SRC>;
+			assigned-clock-parents = <&dsi0_phy 0>,
+						<&dsi0_phy 0>,
+						<&dsi0_phy 1>,
+						<&dsi0_phy 1>;
+			syscon-sfpb = <&mmss_sfpb>;
+			phys = <&dsi0_phy>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi0_out: endpoint {
+					};
+				};
+			};
+		};
+
+
+		dsi0_phy: phy@4700200 {
+			compatible = "qcom,dsi-phy-28nm-8960";
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			reg = <0x04700200 0x100>,
+				<0x04700300 0x200>,
+				<0x04700500 0x5c>;
+			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
+			clock-names = "iface", "ref";
+			clocks = <&mmcc DSI_M_AHB_CLK>,
+				 <&pxo_board>;
+			status = "disabled";
+		};
+
+		dsi1: dsi@5800000 {
+			compatible = "qcom,mdss-dsi-ctrl";
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x05800000 0x200>;
+			reg-names = "dsi_ctrl";
+
+			clocks = <&mmcc DSI2_M_AHB_CLK>,
+				 <&mmcc DSI2_S_AHB_CLK>,
+				 <&mmcc AMP_AHB_CLK>,
+				 <&mmcc DSI2_CLK>,
+				 <&mmcc DSI2_BYTE_CLK>,
+				 <&mmcc DSI2_PIXEL_CLK>,
+				 <&mmcc DSI2_ESC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core_mmss",
+				      "src",
+				      "byte",
+				      "pixel",
+				      "core";
+
+			assigned-clocks = <&mmcc DSI2_BYTE_SRC>,
+					  <&mmcc DSI2_ESC_SRC>,
+					  <&mmcc DSI2_SRC>,
+					  <&mmcc DSI2_PIXEL_SRC>;
+			assigned-clock-parents = <&dsi1_phy 0>,
+						 <&dsi1_phy 0>,
+						 <&dsi1_phy 1>,
+						 <&dsi1_phy 1>;
+
+			syscon-sfpb = <&mmss_sfpb>;
+			phys = <&dsi1_phy>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi1_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi1_out: endpoint {
+					};
+				};
+			};
+		};
+
+
+		dsi1_phy: dsi-phy@5800200 {
+			compatible = "qcom,dsi-phy-28nm-8960";
+			reg = <0x05800200 0x100>,
+			      <0x05800300 0x200>,
+			      <0x05800500 0x5c>;
+			reg-names = "dsi_pll",
+				    "dsi_phy",
+				    "dsi_phy_regulator";
+			clock-names = "iface",
+				      "ref";
+			clocks = <&mmcc DSI2_M_AHB_CLK>,
+				 <&pxo_board>;
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdp_port0: iommu@7500000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc MDP_AXI_CLK>;
+			reg = <0x07500000 0x100000>;
+			interrupts =
+			    <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ncb = <2>;
+		};
+
+		mdp_port1: iommu@7600000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc MDP_AXI_CLK>;
+			reg = <0x07600000 0x100000>;
+			interrupts =
+			    <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ncb = <2>;
+		};
+
+		gfx3d: iommu@7c00000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>;
+			reg = <0x07c00000 0x100000>;
+			interrupts =
+			    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ncb = <3>;
+		};
+
+		gfx3d1: iommu@7d00000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>;
+			reg = <0x07d00000 0x100000>;
+			interrupts =
+			    <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ncb = <3>;
+		};
+
+		pcie: pci@1b500000 {
+			compatible = "qcom,pcie-apq8064";
+			reg = <0x1b500000 0x1000>,
+			      <0x1b502000 0x80>,
+			      <0x1b600000 0x100>,
+			      <0x0ff00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00100000>, /* I/O */
+				 <0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* mem */
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			clocks = <&gcc PCIE_A_CLK>,
+				 <&gcc PCIE_H_CLK>,
+				 <&gcc PCIE_PHY_REF_CLK>;
+			clock-names = "core", "iface", "phy";
+			resets = <&gcc PCIE_ACLK_RESET>,
+				 <&gcc PCIE_HCLK_RESET>,
+				 <&gcc PCIE_POR_RESET>,
+				 <&gcc PCIE_PCI_RESET>,
+				 <&gcc PCIE_PHY_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy";
+			status = "disabled";
+		};
+
+		hdmi: hdmi-tx@4a00000 {
+			compatible = "qcom,hdmi-tx-8960";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pinctrl>;
+			reg = <0x04a00000 0x2f0>;
+			reg-names = "core_physical";
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mmcc HDMI_APP_CLK>,
+				 <&mmcc HDMI_M_AHB_CLK>,
+				 <&mmcc HDMI_S_AHB_CLK>;
+			clock-names = "core",
+				      "master_iface",
+				      "slave_iface";
+
+			phys = <&hdmi_phy>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					hdmi_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					hdmi_out: endpoint {
+					};
+				};
+			};
+		};
+
+		hdmi_phy: phy@4a00400 {
+			compatible = "qcom,hdmi-phy-8960";
+			reg = <0x4a00400 0x60>,
+			      <0x4a00500 0x100>;
+			reg-names = "hdmi_phy",
+				    "hdmi_pll";
+
+			clocks = <&mmcc HDMI_S_AHB_CLK>;
+			clock-names = "slave_iface";
+			#phy-cells = <0>;
+			#clock-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdp: display-controller@5100000 {
+			compatible = "qcom,mdp4";
+			reg = <0x05100000 0xf0000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mmcc MDP_CLK>,
+				 <&mmcc MDP_AHB_CLK>,
+				 <&mmcc MDP_AXI_CLK>,
+				 <&mmcc MDP_LUT_CLK>,
+				 <&mmcc HDMI_TV_CLK>,
+				 <&mmcc MDP_TV_CLK>;
+			clock-names = "core_clk",
+				      "iface_clk",
+				      "bus_clk",
+				      "lut_clk",
+				      "hdmi_clk",
+				      "tv_clk";
+
+			iommus = <&mdp_port0 0
+				  &mdp_port0 2
+				  &mdp_port1 0
+				  &mdp_port1 2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					mdp_lvds_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					mdp_dsi1_out: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					mdp_dsi2_out: endpoint {
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					mdp_dtv_out: endpoint {
+					};
+				};
+			};
+		};
+
+		riva: riva-pil@3200800 {
+			compatible = "qcom,riva-pil";
+
+			reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal";
+
+			memory-region = <&wcnss_mem>;
+
+			vddcx-supply = <&pm8921_s3>;
+			vddmx-supply = <&pm8921_l24>;
+			vddpx-supply = <&pm8921_s4>;
+
+			status = "disabled";
+
+			iris {
+				compatible = "qcom,wcn3660";
+
+				clocks = <&cxo_board>;
+				clock-names = "xo";
+
+				vddxo-supply = <&pm8921_l4>;
+				vddrfa-supply = <&pm8921_s2>;
+				vddpa-supply = <&pm8921_l10>;
+				vdddig-supply = <&pm8921_lvs2>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&l2cc 8 25>;
+				qcom,smd-edge = <6>;
+
+				label = "riva";
+
+				wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&riva>;
+
+					bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		etb@1a01000 {
+			compatible = "arm,coresight-etb10", "arm,primecell";
+			reg = <0x1a01000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		tpiu@1a03000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x1a03000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		replicator {
+			compatible = "arm,coresight-static-replicator";
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@1a04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x1a04000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 2 - connected to STM component
+				 * 3 - not-connected
+				 * 6 - not-connected
+				 * 7 - not-connected
+				 */
+				port@0 {
+					reg = <0>;
+					funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port@4 {
+					reg = <4>;
+					funnel_in4: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port@5 {
+					reg = <5>;
+					funnel_in5: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+		};
+
+		etm@1a1c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1c000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@1a1d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1d000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@1a1e000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1e000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@1a1f000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1f000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&funnel_in5>;
+					};
+				};
+			};
+		};
+	};
+};
+#include "qcom-apq8064-pins.dtsi"
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
new file mode 100644
index 0000000000000..e0679436000bf
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+
+/delete-node/ &mpss_region;
+
+/ {
+	model = "Qualcomm APQ8074 Dragonboard";
+	compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+		usid0 = &pm8941_0;
+		usid4 = &pm8841_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-0 = <&msm_keys_default>;
+		pinctrl-names = "default";
+
+		button-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-general {
+			label = "General";
+			linux,code = <KEY_PROG1>;
+			gpios = <&pm8941_gpios 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reserved-memory {
+		mpss_region: mpss@ac00000 {
+			reg = <0x0ac00000 0x2500000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_dma {
+	qcom,controlled-remotely;
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <200000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+		read-only;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm8941_l2>;
+	vdd-supply = <&pm8941_l22>;
+	vddio-supply = <&pm8941_l12>;
+
+	status = "okay";
+
+	panel: panel@0 {
+		compatible = "sharp,ls043t1le01-qhd";
+		reg = <0>;
+
+		avdd-supply = <&pm8941_l22>;
+		backlight = <&pm8941_wled>;
+		reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+
+	vddio-supply = <&pm8941_l12>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&pm8941_gpios {
+        msm_keys_default: pm8941-gpio-keys-state {
+		pins = "gpio5", "gpio23";
+		function = "normal";
+		input-enable;
+		drive-push-pull;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		power-source = <PM8941_GPIO_S3>; /* 1.8V */
+        };
+};
+
+&pm8941_lpg {
+	qcom,power-source = <1>;
+	status = "okay";
+
+	led@5 {
+		reg = <5>;
+		color = <LED_COLOR_ID_BLUE>;
+		function = LED_FUNCTION_INDICATOR;
+	};
+
+	led@6 {
+		reg = <6>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+	};
+
+	led@7 {
+		reg = <7>;
+		color = <LED_COLOR_ID_RED>;
+		function = LED_FUNCTION_INDICATOR;
+	};
+};
+
+&pm8941_wled {
+	qcom,cs-out;
+	qcom,switching-freq = <3200>;
+	qcom,ovp = <32>;
+	qcom,num-strings = <1>;
+
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+
+	firmware-name = "qcom/apq8074/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+
+	firmware-name = "qcom/apq8074/mba.mbn", "qcom/apq8074/modem.mbn";
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vin_5vs-supply = <&pm8941_5v>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+};
+
+&tlmm {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		cd-pins {
+			pins = "gpio62";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs2_phy>;
+	phy-select = <&tcsr 0xb000 1>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs2_phy {
+	status = "okay";
+	v3p3-supply = <&pm8941_l24>;
+	v1p8-supply = <&pm8941_l6>;
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x63>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
new file mode 100644
index 0000000000000..116e59a3b76d0
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8084.dtsi"
+#include "qcom-pma8084.dtsi"
+
+/ {
+	model = "Qualcomm APQ8084/IFC6540";
+	compatible = "qcom,apq8084-sbc", "qcom,apq8084";
+
+	aliases {
+		serial0 = &blsp2_uart2;
+		usid0 = &pma8084_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		serial@f995e000 {
+			status = "okay";
+		};
+	};
+};
+
+&sdhc_1 {
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
new file mode 100644
index 0000000000000..c6b6680248a69
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8084.dtsi"
+#include "qcom-pma8084.dtsi"
+
+/ {
+	model = "Qualcomm APQ 8084-MTP";
+	compatible = "qcom,apq8084-mtp", "qcom,apq8084";
+
+	aliases {
+		serial0 = &blsp2_uart2;
+		usid0 = &pma8084_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		serial@f995e000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi
new file mode 100644
index 0000000000000..8f178bc87e1d9
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi
@@ -0,0 +1,853 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-apq8084.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm APQ 8084";
+	compatible = "qcom,apq8084";
+	interrupt-parent = <&intc>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_mem: smem_region@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <0>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <1>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <2>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <3>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			qcom,saw = <&saw_l2>;
+		};
+
+		idle-states {
+			CPU_SPC: spc {
+				compatible = "qcom,idle-state-spc",
+						"arm,idle-state";
+				entry-latency-us = <150>;
+				exit-latency-us = <200>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-apq8084", "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 7 0xf04>;
+	};
+
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 2 0xf08>,
+			     <GIC_PPI 3 0xf08>,
+			     <GIC_PPI 4 0xf08>,
+			     <GIC_PPI 1 0xf08>;
+		clock-frequency = <19200000>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		memory-region = <&smem_mem>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		apcs: syscon@f9011000 {
+			compatible = "syscon";
+			reg = <0xf9011000 0x1000>;
+		};
+
+		sram@fc190000 {
+			compatible = "qcom,apq8084-rpm-stats";
+			reg = <0xfc190000 0x10000>;
+		};
+
+		qfprom: qfprom@fc4bc000 {
+			compatible = "qcom,apq8084-qfprom", "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@d0 {
+				reg = <0xd0 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1: s0-p1@d1 {
+				reg = <0xd1 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p1: s1-p1@d2 {
+				reg = <0xd1 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p1: s2-p1@d2 {
+				reg = <0xd2 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p1: s3-p1@d3 {
+				reg = <0xd3 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1: s4-p1@d4 {
+				reg = <0xd4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p1: s5-p1@d4 {
+				reg = <0xd4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@d5 {
+				reg = <0xd5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p1: s7-p1@d6 {
+				reg = <0xd6 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s8_p1: s8-p1@d7 {
+				reg = <0xd7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_mode: mode@d7 {
+				reg = <0xd7 0x1>;
+				bits = <6 2>;
+			};
+
+			tsens_s9_p1: s9-p1@d8 {
+				reg = <0xd8 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s10_p1: s10_p1@d8 {
+				reg = <0xd8 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_base2: base2@d9 {
+				reg = <0xd9 0x2>;
+				bits = <4 8>;
+			};
+
+			tsens_s0_p2: s0-p2@da {
+				reg = <0xda 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s1_p2: s1-p2@db {
+				reg = <0xdb 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s2_p2: s2-p2@dc {
+				reg = <0xdc 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s3_p2: s3-p2@dc {
+				reg = <0xdc 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s4_p2: s4-p2@dd {
+				reg = <0xdd 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s5_p2: s5-p2@de {
+				reg = <0xde 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s6_p2: s6-p2@df {
+				reg = <0xdf 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@e0 {
+				reg = <0xe0 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s8_p2: s8-p2@e0 {
+				reg = <0xe0 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s9_p2: s9-p2@e1 {
+				reg = <0xe1 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s10_p2: s10_p2@e2 {
+				reg = <0xe2 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s5_p2_backup: s5-p2_backup@e3 {
+				reg = <0xe3 0x2>;
+				bits = <0 6>;
+			};
+
+			tsens_mode_backup: mode_backup@e3 {
+				reg = <0xe3 0x1>;
+				bits = <6 2>;
+			};
+
+			tsens_s6_p2_backup: s6-p2_backup@e4 {
+				reg = <0xe4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2_backup: s7-p2_backup@e4 {
+				reg = <0xe4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p2_backup: s8-p2_backup@e5 {
+				reg = <0xe5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s9_p2_backup: s9-p2_backup@e6 {
+				reg = <0xe6 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s10_p2_backup: s10_p2_backup@e7 {
+				reg = <0xe7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_base1_backup: base1_backup@440 {
+				reg = <0x440 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1_backup: s0-p1_backup@441 {
+				reg = <0x441 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p1_backup: s1-p1_backup@442 {
+				reg = <0x441 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p1_backup: s2-p1_backup@442 {
+				reg = <0x442 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p1_backup: s3-p1_backup@443 {
+				reg = <0x443 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1_backup: s4-p1_backup@444 {
+				reg = <0x444 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p1_backup: s5-p1_backup@444 {
+				reg = <0x444 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1_backup: s6-p1_backup@445 {
+				reg = <0x445 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p1_backup: s7-p1_backup@446 {
+				reg = <0x446 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_use_backup: use_backup@447 {
+				reg = <0x447 0x1>;
+				bits = <5 3>;
+			};
+
+			tsens_s8_p1_backup: s8-p1_backup@448 {
+				reg = <0x448 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p1_backup: s9-p1_backup@448 {
+				reg = <0x448 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s10_p1_backup: s10_p1_backup@449 {
+				reg = <0x449 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_base2_backup: base2_backup@44a {
+				reg = <0x44a 0x2>;
+				bits = <2 8>;
+			};
+
+			tsens_s0_p2_backup: s0-p2_backup@44b {
+				reg = <0x44b 0x3>;
+				bits = <2 6>;
+			};
+
+			tsens_s1_p2_backup: s1-p2_backup@44c {
+				reg = <0x44c 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s2_p2_backup: s2-p2_backup@44c {
+				reg = <0x44c 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s3_p2_backup: s3-p2_backup@44d {
+				reg = <0x44d 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s4_p2_backup: s4-p2_backup@44e {
+				reg = <0x44e 0x1>;
+				bits = <2 6>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a9000 {
+			compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_use_backup>,
+				      <&tsens_mode_backup>,
+				      <&tsens_base1_backup>, <&tsens_base2_backup>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>,
+				      <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>,
+				      <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>,
+				      <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>,
+				      <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>,
+				      <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>,
+				      <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>,
+				      <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>,
+				      <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>,
+				      <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>,
+				      <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>,
+				      <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "use_backup",
+					   "mode_backup",
+					   "base1_backup", "base2_backup",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2",
+					   "s0_p1_backup", "s0_p2_backup",
+					   "s1_p1_backup", "s1_p2_backup",
+					   "s2_p1_backup", "s2_p2_backup",
+					   "s3_p1_backup", "s3_p2_backup",
+					   "s4_p1_backup", "s4_p2_backup",
+					   "s5_p1_backup", "s5_p2_backup",
+					   "s6_p1_backup", "s6_p2_backup",
+					   "s7_p1_backup", "s7_p2_backup",
+					   "s8_p1_backup", "s8_p2_backup",
+					   "s9_p1_backup", "s9_p2_backup",
+					   "s10_p1_backup", "s10_p2_backup";
+			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		saw0: power-controller@f9089000 {
+			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw1: power-controller@f9099000 {
+			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw2: power-controller@f90a9000 {
+			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw3: power-controller@f90b9000 {
+			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw_l2: power-controller@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		acc0: power-manager@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc1: power-manager@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc2: power-manager@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc3: power-manager@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-apq8084";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x4000>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <0>, /* ufs */
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>, /* sata */
+				 <0>,
+				 <0>; /* pcie */
+			clock-names = "xo",
+				      "sleep_clk",
+				      "ufs_rx_symbol_0_clk_src",
+				      "ufs_rx_symbol_1_clk_src",
+				      "ufs_tx_symbol_0_clk_src",
+				      "ufs_tx_symbol_1_clk_src",
+				      "sata_asic0_clk",
+				      "sata_rx_clk",
+				      "pcie_pipe";
+		};
+
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,apq8084-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		rpm_msg_ram: sram@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,apq8084-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 147>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		blsp2_uart2: serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@f9824900 {
+			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@f98a4900 {
+			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		spmi_bus: spmi@fc4cf000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg-names = "core", "intr", "cnfg";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm-requests {
+				compatible = "qcom,rpm-apq8084";
+				qcom,smd-channels = "rpm_requests";
+
+				regulators-0 {
+					compatible = "qcom,rpm-pma8084-regulators";
+
+					pma8084_s1: s1 {};
+					pma8084_s2: s2 {};
+					pma8084_s3: s3 {};
+					pma8084_s4: s4 {};
+					pma8084_s5: s5 {};
+					pma8084_s6: s6 {};
+					pma8084_s7: s7 {};
+					pma8084_s8: s8 {};
+					pma8084_s9: s9 {};
+					pma8084_s10: s10 {};
+					pma8084_s11: s11 {};
+					pma8084_s12: s12 {};
+
+					pma8084_l1: l1 {};
+					pma8084_l2: l2 {};
+					pma8084_l3: l3 {};
+					pma8084_l4: l4 {};
+					pma8084_l5: l5 {};
+					pma8084_l6: l6 {};
+					pma8084_l7: l7 {};
+					pma8084_l8: l8 {};
+					pma8084_l9: l9 {};
+					pma8084_l10: l10 {};
+					pma8084_l11: l11 {};
+					pma8084_l12: l12 {};
+					pma8084_l13: l13 {};
+					pma8084_l14: l14 {};
+					pma8084_l15: l15 {};
+					pma8084_l16: l16 {};
+					pma8084_l17: l17 {};
+					pma8084_l18: l18 {};
+					pma8084_l19: l19 {};
+					pma8084_l20: l20 {};
+					pma8084_l21: l21 {};
+					pma8084_l22: l22 {};
+					pma8084_l23: l23 {};
+					pma8084_l24: l24 {};
+					pma8084_l25: l25 {};
+					pma8084_l26: l26 {};
+					pma8084_l27: l27 {};
+
+					pma8084_lvs1: lvs1 {};
+					pma8084_lvs2: lvs2 {};
+					pma8084_lvs3: lvs3 {};
+					pma8084_lvs4: lvs4 {};
+
+					pma8084_5vs1: 5vs1 {};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac-bit.dts
new file mode 100644
index 0000000000000..1b27edce9d4f3
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac-bit.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/leds/common.h>
+#include "qcom-ipq4018-ap120c-ac.dtsi"
+
+/ {
+	model = "ALFA Network AP120C-AC Bit";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "ap120c-ac:green:power";
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-wlan {
+			label = "ap120c-ac:green:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-support {
+			label = "ap120c-ac:green:support";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dts
new file mode 100644
index 0000000000000..a707057c887d2
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/leds/common.h>
+#include "qcom-ipq4018-ap120c-ac.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		status: led-status {
+			label = "ap120c-ac:blue:status";
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		led-wlan2g {
+			label = "ap120c-ac:green:wlan2g";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		led-wlan5g {
+			label = "ap120c-ac:red:wlan5g";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
new file mode 100644
index 0000000000000..d90b4f4c63afe
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ALFA Network AP120C-AC";
+	compatible = "alfa-network,ap120c-ac", "qcom,ipq4018";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-reset {
+			label = "reset";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&tlmm {
+	i2c0_pins: i2c0_pinmux {
+		mux_i2c {
+			function = "blsp_i2c0";
+			pins = "gpio58", "gpio59";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_mdio {
+			pins = "gpio53";
+			function = "mdio";
+			bias-pull-up;
+		};
+
+		mux_mdc {
+			pins = "gpio52";
+			function = "mdc";
+			bias-pull-up;
+		};
+	};
+
+	serial0_pins: serial0_pinmux {
+		mux_uart {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi0_pins: spi0_pinmux {
+		mux_spi {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		mux_cs {
+			function = "gpio";
+			pins = "gpio54", "gpio4";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	usb-power-hog {
+		line-name = "USB-power";
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		gpio-hog;
+		output-high;
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&prng {
+	status = "okay";
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	tpm@29 {
+		compatible = "atmel,at97sc3204t";
+		reg = <0x29>;
+	};
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+
+			partition@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+
+			partition@d0000 {
+				label = "DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+
+			partition@e0000 {
+				label = "u-boot-env";
+				reg = <0x000e0000 0x00010000>;
+			};
+
+			partition@f0000 {
+				label = "u-boot";
+				reg = <0x000f0000 0x00080000>;
+				read-only;
+			};
+
+			partition@170000 {
+				label = "ART";
+				reg = <0x00170000 0x00010000>;
+				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
+			};
+
+			partition@180000 {
+				label = "priv_data1";
+				reg = <0x00180000 0x00010000>;
+				read-only;
+			};
+
+			partition@190000 {
+				label = "priv_data2";
+				reg = <0x00190000 0x00010000>;
+				read-only;
+			};
+		};
+	};
+
+	flash@1 {
+		compatible = "spi-nand";
+		reg = <1>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ubi1";
+				reg = <0x00000000 0x04000000>;
+			};
+
+			partition@4000000 {
+				label = "ubi2";
+				reg = <0x04000000 0x04000000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	status = "okay";
+
+	pinctrl-0 = <&serial0_pins>;
+	pinctrl-names = "default";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+};
+
+&wifi0 {
+	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
+};
+
+&wifi1 {
+	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
+	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+
+	dwc3@8a00000 {
+		phys = <&usb3_hs_phy>;
+		phy-names = "usb2-phy";
+	};
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
new file mode 100644
index 0000000000000..365fbac417fd1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "8devices Jalapeno";
+	compatible = "8dev,jalapeno", "qcom,ipq4018";
+};
+
+&tlmm {
+	mdio_pins: mdio_pinmux {
+		pinmux_1 {
+			pins = "gpio53";
+			function = "mdio";
+		};
+
+		pinmux_2 {
+			pins = "gpio52";
+			function = "mdc";
+		};
+
+		pinconf {
+			pins = "gpio52", "gpio53";
+			bias-pull-up;
+		};
+	};
+
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pin {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		pin_cs {
+			function = "gpio";
+			pins = "gpio54", "gpio59";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&prng {
+	status = "okay";
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		status = "okay";
+
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+
+			partition@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+
+			partition@d0000 {
+				label = "DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+
+			partition@e0000 {
+				label = "u-boot-env";
+				reg = <0x000e0000 0x00010000>;
+			};
+
+			partition@f0000 {
+				label = "u-boot";
+				reg = <0x000f0000 0x00080000>;
+				read-only;
+			};
+
+			partition@170000 {
+				label = "ART";
+				reg = <0x00170000 0x00010000>;
+				read-only;
+			};
+		};
+	};
+
+	spi-nand@1 {
+		status = "okay";
+
+		compatible = "spi-nand";
+		reg = <1>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ubi1";
+				reg = <0x00000000 0x04000000>;
+			};
+
+			partition@4000000 {
+				label = "ubi2";
+				reg = <0x04000000 0x04000000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	status = "okay";
+
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+};
+
+&wifi0 {
+	status = "okay";
+
+	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+};
+
+&wifi1 {
+	status = "okay";
+
+	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+};
+
+&usb3_ss_phy {
+	status = "okay";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1-c1.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1-c1.dts
new file mode 100644
index 0000000000000..ddaa273f72ca5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1-c1.dts
@@ -0,0 +1,22 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019-ap.dk01.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
+	compatible = "qcom,ipq4019-ap-dk01.1-c1", "qcom,ipq4019";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
new file mode 100644
index 0000000000000..0505270cf508c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
@@ -0,0 +1,113 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "qcom-ipq4019.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		pinctrl@1000000 {
+			serial_pins: serial_pinmux {
+				mux {
+					pins = "gpio60", "gpio61";
+					function = "blsp_uart0";
+					bias-disable;
+				};
+			};
+
+			spi_0_pins: spi_0_pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio55", "gpio56", "gpio57";
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio54";
+				};
+				pinconf {
+					pins = "gpio55", "gpio56", "gpio57";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				pinconf_cs {
+					pins = "gpio54";
+					drive-strength = <2>;
+					bias-disable;
+					output-high;
+				};
+			};
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			status = "okay";
+		};
+
+		spi@78b5000 {
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+			cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+			mx25l25635e@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "mx25l25635e";
+				spi-max-frequency = <24000000>;
+			};
+		};
+
+		serial@78af000 {
+			pinctrl-0 = <&serial_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		cryptobam: dma-controller@8e04000 {
+			status = "okay";
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		wifi@a000000 {
+			status = "okay";
+		};
+
+		wifi@a800000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1-c1.dts
new file mode 100644
index 0000000000000..0993f840d1fc7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk04.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1";
+	compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019";
+
+	soc {
+		dma-controller@7984000 {
+			status = "okay";
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1-c3.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1-c3.dts
new file mode 100644
index 0000000000000..7765247125e4b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1-c3.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk04.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3";
+	compatible = "qcom,ipq4019-ap-dk04.1-c3", "qcom,ipq4019";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
new file mode 100644
index 0000000000000..468ebc40d2ad3
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256MB */
+	};
+
+	soc {
+		pinctrl@1000000 {
+			serial_0_pins: serial0-pinmux {
+				pins = "gpio16", "gpio17";
+				function = "blsp_uart0";
+				bias-disable;
+			};
+
+			serial_1_pins: serial1-pinmux {
+				pins = "gpio8", "gpio9",
+					"gpio10", "gpio11";
+				function = "blsp_uart1";
+				bias-disable;
+			};
+
+			spi_0_pins: spi-0-pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio13", "gpio14", "gpio15";
+					bias-disable;
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio12";
+					bias-disable;
+					output-high;
+				};
+			};
+
+			i2c_0_pins: i2c-0-pinmux {
+				pins = "gpio20", "gpio21";
+				function = "blsp_i2c0";
+				bias-disable;
+			};
+
+			nand_pins: nand-pins {
+				pins = "gpio53", "gpio55", "gpio56",
+					"gpio57", "gpio58", "gpio59",
+					"gpio60", "gpio62", "gpio63",
+					"gpio64", "gpio65", "gpio66",
+					"gpio67", "gpio68", "gpio69";
+				function = "qpic";
+			};
+		};
+
+		serial@78af000 {
+			pinctrl-0 = <&serial_0_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		serial@78b0000 {
+			pinctrl-0 = <&serial_1_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		dma-controller@7884000 {
+			status = "okay";
+		};
+
+		spi@78b5000 { /* BLSP1 QUP1 */
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "micron,n25q128a11", "jedec,spi-nor";
+				spi-max-frequency = <24000000>;
+			};
+		};
+
+		pci@40000000 {
+			status = "okay";
+			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
new file mode 100644
index 0000000000000..ea2987fcbff8d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/gpio/gpio.h>
+#include "qcom-ipq4019-ap.dk07.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
+	compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019";
+
+	soc {
+		pci@40000000 {
+			status = "okay";
+			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+		};
+
+		spi@78b6000 {
+			status = "okay";
+		};
+
+		pinctrl@1000000 {
+			serial_1_pins: serial1-pinmux {
+				pins = "gpio8", "gpio9",
+					"gpio10", "gpio11";
+				function = "blsp_uart1";
+				bias-disable;
+			};
+
+			spi_0_pins: spi-0-pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio13", "gpio14", "gpio15";
+					bias-disable;
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio12";
+					bias-disable;
+					output-high;
+				};
+			};
+		};
+
+		serial@78b0000 {
+			pinctrl-0 = <&serial_1_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		spi@78b5000 {
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "micron,n25q128a11", "jedec,spi-nor";
+				spi-max-frequency = <24000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts
new file mode 100644
index 0000000000000..bd3553dd2070b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk07.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C2";
+	compatible = "qcom,ipq4019-ap-dk07.1-c2", "qcom,ipq4019";
+
+	soc {
+		pinctrl@1000000 {
+			serial_1_pins: serial1-pinmux {
+				pins = "gpio8", "gpio9";
+				function = "blsp_uart1";
+				bias-disable;
+			};
+		};
+
+		serial@78b0000 {
+			pinctrl-0 = <&serial_1_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
new file mode 100644
index 0000000000000..7ef635997efa4
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512MB */
+	};
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		pinctrl@1000000 {
+			serial_0_pins: serial0-pinmux {
+				pins = "gpio16", "gpio17";
+				function = "blsp_uart0";
+				bias-disable;
+			};
+
+			i2c_0_pins: i2c-0-pinmux {
+				pins = "gpio20", "gpio21";
+				function = "blsp_i2c0";
+				bias-disable;
+			};
+
+			nand_pins: nand-pins {
+				pins = "gpio53", "gpio55", "gpio56",
+				       "gpio57", "gpio58", "gpio59",
+				       "gpio60", "gpio62", "gpio63",
+				       "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68", "gpio69";
+				function = "qpic";
+                        };
+		};
+
+		serial@78af000 {
+			pinctrl-0 = <&serial_0_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		dma-controller@7884000 {
+			status = "okay";
+		};
+
+		i2c@78b7000 { /* BLSP1 QUP2 */
+			pinctrl-0 = <&i2c_0_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		dma-controller@7984000 {
+			status = "okay";
+		};
+	};
+};
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
new file mode 100644
index 0000000000000..f0ef86fadc9d9
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -0,0 +1,698 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	model = "Qualcomm Technologies, Inc. IPQ4019";
+	compatible = "qcom,ipq4019";
+	interrupt-parent = <&intc>;
+
+	reserved-memory {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+
+		smem_region: smem@87e00000 {
+			reg = <0x87e00000 0x080000>;
+			no-map;
+		};
+
+		tz@87e80000 {
+			reg = <0x87e80000 0x180000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		spi0 = &blsp1_spi1;
+		spi1 = &blsp1_spi2;
+		i2c0 = &blsp1_i2c3;
+		i2c1 = &blsp1_i2c4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			reg = <0x0>;
+			clocks = <&gcc GCC_APPS_CLK_SRC>;
+			clock-frequency = <0>;
+			clock-latency = <256000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			reg = <0x1>;
+			clocks = <&gcc GCC_APPS_CLK_SRC>;
+			clock-frequency = <0>;
+			clock-latency = <256000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			reg = <0x2>;
+			clocks = <&gcc GCC_APPS_CLK_SRC>;
+			clock-frequency = <0>;
+			clock-latency = <256000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			reg = <0x3>;
+			clocks = <&gcc GCC_APPS_CLK_SRC>;
+			clock-frequency = <0>;
+			clock-latency = <256000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			qcom,saw = <&saw_l2>;
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-48000000 {
+			opp-hz = /bits/ 64 <48000000>;
+			clock-latency-ns = <256000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			clock-latency-ns = <256000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <256000>;
+		};
+		opp-716000000 {
+			opp-hz = /bits/ 64 <716000000>;
+			clock-latency-ns = <256000>;
+ 		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	clocks {
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		xo: xo {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq4019", "qcom,scm";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 2 0xf08>,
+			     <1 3 0xf08>,
+			     <1 4 0xf08>,
+			     <1 1 0xf08>;
+		clock-frequency = <48000000>;
+		always-on;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>,
+			<0x0b002000 0x1000>;
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-ipq4019";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x1800000 0x60000>;
+			clocks = <&xo>, <&sleep_clk>;
+			clock-names = "xo", "sleep_clk";
+		};
+
+		prng: rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x22000 0x140>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq4019-pinctrl";
+			reg = <0x01000000 0x300000>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 100>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		vqmmc: regulator@1948000 {
+			compatible = "qcom,vqmmc-ipq4019-regulator";
+			reg = <0x01948000 0x4>;
+			regulator-name = "vqmmc";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+			status = "disabled";
+		};
+
+		sdhci: mmc@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x7824900 0x11c>, <0x7824000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			bus-width = <8>;
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&gcc GCC_DCD_XO_CLK>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x23000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x78b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x78b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@8e04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x08e04000 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
+		crypto: crypto@8e3a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x08e3a000 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		acc0: power-manager@b088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
+		};
+
+		acc1: power-manager@b098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
+		};
+
+		acc2: power-manager@b0a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
+		};
+
+		acc3: power-manager@b0b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
+		};
+
+		saw0: regulator@b089000 {
+			compatible = "qcom,saw2";
+			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@b099000 {
+			compatible = "qcom,saw2";
+			reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
+			regulator;
+		};
+
+		saw2: regulator@b0a9000 {
+			compatible = "qcom,saw2";
+			reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
+			regulator;
+		};
+
+		saw3: regulator@b0b9000 {
+			compatible = "qcom,saw2";
+			reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
+			regulator;
+		};
+
+		saw_l2: regulator@b012000 {
+			compatible = "qcom,saw2";
+			reg = <0xb012000 0x1000>;
+			regulator;
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
+			dma-names = "tx", "rx";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+			dma-names = "tx", "rx";
+		};
+
+		watchdog: watchdog@b017000 {
+			compatible = "qcom,kpss-wdt-ipq4019", "qcom,kpss-wdt";
+			reg = <0xb017000 0x40>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <10>;
+			status = "disabled";
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x4ab000 0x4>;
+		};
+
+		pcie0: pci@40000000 {
+			compatible = "qcom,pcie-ipq4019";
+			reg =  <0x40000000 0xf1d
+				0x40000f20 0xa8
+				0x80000 0x2000
+				0x40100000 0x1000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>,
+				 <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			clocks = <&gcc GCC_PCIE_AHB_CLK>,
+				 <&gcc GCC_PCIE_AXI_M_CLK>,
+				 <&gcc GCC_PCIE_AXI_S_CLK>;
+			clock-names = "aux",
+				      "master_bus",
+				      "slave_bus";
+
+			resets = <&gcc PCIE_AXI_M_ARES>,
+				 <&gcc PCIE_AXI_S_ARES>,
+				 <&gcc PCIE_PIPE_ARES>,
+				 <&gcc PCIE_AXI_M_VMIDMT_ARES>,
+				 <&gcc PCIE_AXI_S_XPU_ARES>,
+				 <&gcc PCIE_PARF_XPU_ARES>,
+				 <&gcc PCIE_PHY_ARES>,
+				 <&gcc PCIE_AXI_M_STICKY_ARES>,
+				 <&gcc PCIE_PIPE_STICKY_ARES>,
+				 <&gcc PCIE_PWR_ARES>,
+				 <&gcc PCIE_AHB_ARES>,
+				 <&gcc PCIE_PHY_AHB_ARES>;
+			reset-names = "axi_m",
+				      "axi_s",
+				      "pipe",
+				      "axi_m_vmid",
+				      "axi_s_xpu",
+				      "parf",
+				      "phy",
+				      "axi_m_sticky",
+				      "pipe_sticky",
+				      "pwr",
+				      "ahb",
+				      "phy_ahb";
+
+			status = "disabled";
+		};
+
+		qpic_bam: dma-controller@7984000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x7984000 0x1a000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QPIC_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		nand: nand-controller@79b0000 {
+			compatible = "qcom,ipq4019-nand";
+			reg = <0x79b0000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+
+			nand@0 {
+				reg = <0>;
+
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		wifi0: wifi@a000000 {
+			compatible = "qcom,ipq4019-wifi";
+			reg = <0xa000000 0x200000>;
+			resets = <&gcc WIFI0_CPU_INIT_RESET>,
+				 <&gcc WIFI0_RADIO_SRIF_RESET>,
+				 <&gcc WIFI0_RADIO_WARM_RESET>,
+				 <&gcc WIFI0_RADIO_COLD_RESET>,
+				 <&gcc WIFI0_CORE_WARM_RESET>,
+				 <&gcc WIFI0_CORE_COLD_RESET>;
+			reset-names = "wifi_cpu_init", "wifi_radio_srif",
+				      "wifi_radio_warm", "wifi_radio_cold",
+				      "wifi_core_warm", "wifi_core_cold";
+			clocks = <&gcc GCC_WCSS2G_CLK>,
+				 <&gcc GCC_WCSS2G_REF_CLK>,
+				 <&gcc GCC_WCSS2G_RTC_CLK>;
+			clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
+				      "wifi_wcss_rtc";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
+					   "msi4",  "msi5",  "msi6",  "msi7",
+					   "msi8",  "msi9", "msi10", "msi11",
+					  "msi12", "msi13", "msi14", "msi15",
+					  "legacy";
+			status = "disabled";
+		};
+
+		wifi1: wifi@a800000 {
+			compatible = "qcom,ipq4019-wifi";
+			reg = <0xa800000 0x200000>;
+			resets = <&gcc WIFI1_CPU_INIT_RESET>,
+				 <&gcc WIFI1_RADIO_SRIF_RESET>,
+				 <&gcc WIFI1_RADIO_WARM_RESET>,
+				 <&gcc WIFI1_RADIO_COLD_RESET>,
+				 <&gcc WIFI1_CORE_WARM_RESET>,
+				 <&gcc WIFI1_CORE_COLD_RESET>;
+			reset-names = "wifi_cpu_init", "wifi_radio_srif",
+				      "wifi_radio_warm", "wifi_radio_cold",
+				      "wifi_core_warm", "wifi_core_cold";
+			clocks = <&gcc GCC_WCSS5G_CLK>,
+				 <&gcc GCC_WCSS5G_REF_CLK>,
+				 <&gcc GCC_WCSS5G_RTC_CLK>;
+			clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
+				      "wifi_wcss_rtc";
+			interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
+					   "msi4",  "msi5",  "msi6",  "msi7",
+					   "msi8",  "msi9", "msi10", "msi11",
+					  "msi12", "msi13", "msi14", "msi15",
+					  "legacy";
+			status = "disabled";
+		};
+
+		mdio: mdio@90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "qcom,ipq4019-mdio";
+			reg = <0x90000 0x64>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+
+			ethphy4: ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+
+		usb3_ss_phy: ssphy@9a000 {
+			compatible = "qcom,usb-ss-ipq4019-phy";
+			#phy-cells = <0>;
+			reg = <0x9a000 0x800>;
+			reg-names = "phy_base";
+			resets = <&gcc USB3_UNIPHY_PHY_ARES>;
+			reset-names = "por_rst";
+			status = "disabled";
+		};
+
+		usb3_hs_phy: hsphy@a6000 {
+			compatible = "qcom,usb-hs-ipq4019-phy";
+			#phy-cells = <0>;
+			reg = <0xa6000 0x40>;
+			reg-names = "phy_base";
+			resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
+			reset-names = "por_rst", "srif_rst";
+			status = "disabled";
+		};
+
+		usb3: usb3@8af8800 {
+			compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
+			reg = <0x8af8800 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gcc GCC_USB3_MASTER_CLK>,
+				 <&gcc GCC_USB3_SLEEP_CLK>,
+				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
+			clock-names = "core", "sleep", "mock_utmi";
+			ranges;
+			status = "disabled";
+
+			dwc3@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xf8000>;
+				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+			};
+		};
+
+		usb2_hs_phy: hsphy@a8000 {
+			compatible = "qcom,usb-hs-ipq4019-phy";
+			#phy-cells = <0>;
+			reg = <0xa8000 0x40>;
+			reg-names = "phy_base";
+			resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
+			reset-names = "por_rst", "srif_rst";
+			status = "disabled";
+		};
+
+		usb2: usb2@60f8800 {
+			compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
+			reg = <0x60f8800 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gcc GCC_USB2_MASTER_CLK>,
+				 <&gcc GCC_USB2_SLEEP_CLK>,
+				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
+			clock-names = "master", "sleep", "mock_utmi";
+			ranges;
+			status = "disabled";
+
+			dwc3@6000000 {
+				compatible = "snps,dwc3";
+				reg = <0x6000000 0xf8000>;
+				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_hs_phy>;
+				phy-names = "usb2-phy";
+				dr_mode = "host";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8062-smb208.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8062-smb208.dtsi
new file mode 100644
index 0000000000000..9d06255104c71
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8062-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "qcom-ipq8062.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8062.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8062.dtsi
new file mode 100644
index 0000000000000..5d3ebd3e2e514
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8062.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8062";
+	compatible = "qcom,ipq8062", "qcom,ipq8064";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts
new file mode 100644
index 0000000000000..a654d3c22c4f5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
+	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
+
+	soc {
+		pinmux@800000 {
+			buttons_pins: buttons_pins {
+				mux {
+					pins = "gpio54", "gpio65";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			i2c@16380000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c4_pins>;
+				pinctrl-names = "default";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
new file mode 100644
index 0000000000000..104eb729c2d6c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "MikroTik RB3011UiAS-RM";
+	compatible = "mikrotik,rb3011", "qcom,ipq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac3;
+		mdio-gpio0 = &mdio0;
+		mdio-gpio1 = &mdio1;
+	};
+
+	chosen {
+		bootargs = "loglevel=8 console=ttyMSM0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@42000000 {
+		reg = <0x42000000 0x3e000000>;
+		device_type = "memory";
+	};
+
+	mdio0: mdio-0 {
+		status = "okay";
+		compatible = "virtual,mdio-gpio";
+		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+			<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&mdio0_pins>;
+		pinctrl-names = "default";
+
+		switch0: switch@10 {
+			compatible = "qca,qca8337";
+
+			dsa,member = <0 0>;
+
+			pinctrl-0 = <&sw0_reset_pin>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+			reg = <0x10>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch0cpu: port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "rgmii-id";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "sw1";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "sw2";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "sw3";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "sw4";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "sw5";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+			};
+		};
+	};
+
+	mdio1: mdio-1 {
+		status = "okay";
+		compatible = "virtual,mdio-gpio";
+		gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
+			<&qcom_pinmux 10 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&mdio1_pins>;
+		pinctrl-names = "default";
+
+		switch1: switch@14 {
+			compatible = "qca,qca8337";
+
+			dsa,member = <1 0>;
+
+			pinctrl-0 = <&sw1_reset_pin>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>;
+			reg = <0x10>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch1cpu: port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&gmac3>;
+					phy-mode = "sgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "sw6";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "sw7";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "sw8";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "sw9";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "sw10";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+			};
+		};
+	};
+
+	soc {
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "okay";
+
+			spi4: spi@1a280000 {
+				status = "okay";
+				spi-max-frequency = <50000000>;
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+				norflash: flash@0 {
+					compatible = "jedec,spi-nor";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					partition@0 {
+						label = "RouterBoot";
+						reg = <0x0 0x40000>;
+					};
+				};
+			};
+		};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&buttons_pins>;
+			pinctrl-names = "default";
+
+			button {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+			led-0 {
+				label = "rb3011:green:user";
+				color = <LED_COLOR_ID_GREEN>;
+				gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	qcom,id = <0>;
+	phy-handle = <&switch0cpu>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac3 {
+	status = "okay";
+
+	phy-mode = "sgmii";
+	qcom,id = <3>;
+	phy-handle = <&switch1cpu>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gsbi7 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+};
+
+&gsbi7_serial {
+	status = "okay";
+};
+
+&hs_phy_1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				label = "RouterBoard NAND 1 Boot";
+				reg = <0x0000000 0x0800000>;
+			};
+
+			main@800000 {
+				label = "RouterBoard NAND 1 Main";
+				reg = <0x0800000 0x7800000>;
+			};
+		};
+	};
+};
+
+&qcom_pinmux {
+	buttons_pins: buttons_pins {
+		mux {
+			pins = "gpio66";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	leds_pins: leds_pins {
+		mux {
+			pins = "gpio33";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio1_pins {
+		mux {
+			pins = "gpio10", "gpio11";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	sw0_reset_pin: sw0_reset_pin {
+		mux {
+			pins = "gpio16";
+			drive-strength = <16>;
+			function = "gpio";
+			bias-disable;
+			input-disable;
+		};
+	};
+
+	sw1_reset_pin: sw1_reset_pin {
+		mux {
+			pins = "gpio17";
+			drive-strength = <16>;
+			function = "gpio";
+			bias-disable;
+			input-disable;
+		};
+	};
+
+	usb1_pwr_en_pins: usb1_pwr_en_pins {
+		mux {
+			pins = "gpio4";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&ss_phy_1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	pinctrl-0 = <&usb1_pwr_en_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-smb208.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-smb208.dtsi
new file mode 100644
index 0000000000000..ac9c44f0c1647
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
new file mode 100644
index 0000000000000..c5abe7151f142
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
+
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "okay";
+
+			serial@16340000 {
+				status = "okay";
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "okay";
+
+			spi4: spi@1a280000 {
+				status = "okay";
+				spi-max-frequency = <50000000>;
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 0>;
+
+				flash: flash@0 {
+					compatible = "s25fl256s1";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					partition@0 {
+						label = "rootfs";
+						reg = <0x0 0x1000000>;
+					};
+
+					partition@1 {
+						label = "scratch";
+						reg = <0x1000000 0x1000000>;
+					};
+				};
+			};
+		};
+
+		sata-phy@1b400000 {
+			status = "okay";
+		};
+
+		sata@29000000 {
+			ports-implemented = <0x1>;
+			status = "okay";
+		};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&buttons_pins>;
+			pinctrl-names = "default";
+
+			button-1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+			button-2 {
+				label = "wps";
+				linux,code = <KEY_WPS_BUTTON>;
+				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+			led-0 {
+				label = "led_usb1";
+				gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "usbdev";
+				default-state = "off";
+			};
+
+			led-1 {
+				label = "led_usb3";
+				gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "usbdev";
+				default-state = "off";
+			};
+
+			led-2 {
+				label = "status_led_fail";
+				function = LED_FUNCTION_STATUS;
+				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led-3 {
+				label = "sata_led";
+				gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led-4 {
+				label = "status_led_pass";
+				function = LED_FUNCTION_STATUS;
+				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0-smb208.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0-smb208.dtsi
new file mode 100644
index 0000000000000..0442580b22ded
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi
new file mode 100644
index 0000000000000..2f117d576daf3
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064-v2.0";
+
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+
+	serial@16340000 {
+		status = "okay";
+	};
+	/*
+	 * The i2c device on gsbi4 should not be enabled.
+	 * On ipq806x designs gsbi4 i2c is meant for exclusive
+	 * RPM usage. Turning this on in kernel manifests as
+	 * i2c failure for the RPM.
+	 */
+};
+
+&pcie0 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&sata {
+	ports-implemented = <0x1>;
+};
+
+&ss_phy_0 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
+
+&ss_phy_1 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
new file mode 100644
index 0000000000000..6198f42f6a9c7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -0,0 +1,1377 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm IPQ8064";
+	compatible = "qcom,ipq8064";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	thermal-zones {
+		sensor0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor4-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor5-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor6-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor7-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor8-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor9-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor10-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nss@40000000 {
+			reg = <0x40000000 0x1000000>;
+			no-map;
+		};
+
+		smem: smem@41000000 {
+			compatible = "qcom,smem";
+			reg = <0x41000000 0x200000>;
+			no-map;
+
+			hwlocks = <&sfpb_mutex 3>;
+		};
+	};
+
+	clocks {
+		cxo_board: cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		pxo_board: pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq806x", "qcom,scm";
+		};
+	};
+
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,wr_osr_lmt = <7>;
+		snps,rd_osr_lmt = <7>;
+		snps,blen = <16 0 0 0 0 0 0>;
+	};
+
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-ipq8064";
+			reg = <0x00108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ack", "err", "wakeup";
+
+			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+			clock-names = "ram";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		qfprom: qfprom@700000 {
+			compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			speedbin_efuse: speedbin@c0 {
+				reg = <0xc0 0x4>;
+			};
+			tsens_calib: calib@400 {
+				reg = <0x400 0xb>;
+			};
+			tsens_calib_backup: calib_backup@410 {
+				reg = <0x410 0xb>;
+			};
+		};
+
+		qcom_pinmux: pinmux@800000 {
+			compatible = "qcom,ipq8064-pinctrl";
+			reg = <0x00800000 0x4000>;
+
+			gpio-controller;
+			gpio-ranges = <&qcom_pinmux 0 0 69>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+			pcie0_pins: pcie0_pinmux {
+				mux {
+					pins = "gpio3";
+					function = "pcie1_rst";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			pcie1_pins: pcie1_pinmux {
+				mux {
+					pins = "gpio48";
+					function = "pcie2_rst";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			pcie2_pins: pcie2_pinmux {
+				mux {
+					pins = "gpio63";
+					function = "pcie3_rst";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			i2c4_pins: i2c4-default {
+				pins = "gpio12", "gpio13";
+				function = "gsbi4";
+				drive-strength = <12>;
+				bias-disable;
+			};
+
+			spi_pins: spi_pins {
+				mux {
+					pins = "gpio18", "gpio19", "gpio21";
+					function = "gsbi5";
+					drive-strength = <10>;
+					bias-none;
+				};
+			};
+
+			leds_pins: leds_pins {
+				mux {
+					pins = "gpio7", "gpio8", "gpio9",
+					       "gpio26", "gpio53";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+					output-low;
+				};
+			};
+
+			buttons_pins: buttons_pins {
+				mux {
+					pins = "gpio54";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			nand_pins: nand_pins {
+				mux {
+					pins = "gpio34", "gpio35", "gpio36",
+					       "gpio37", "gpio38", "gpio39",
+					       "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				pullups {
+					pins = "gpio39";
+					function = "nand";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				hold {
+					pins = "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
+					bias-bus-hold;
+				};
+			};
+
+			mdio0_pins: mdio0-pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			rgmii2_pins: rgmii2-pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29",
+					       "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59",
+					       "gpio60", "gpio61", "gpio62";
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-ipq8064", "syscon";
+			clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
+			clock-names = "pxo", "cxo", "pll4";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			tsens: thermal-sensor {
+				compatible = "qcom,ipq8064-tsens";
+
+				nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+				nvmem-cell-names = "calib", "calib_backup";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uplow";
+
+				#qcom,sensors = <11>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+
+		sfpb_mutex: hwlock@1200600 {
+			compatible = "qcom,sfpb-mutex";
+			reg = <0x01200600 0x100>;
+
+			#hwlock-cells = <1>;
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer",
+				     "qcom,msm-timer";
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <25000000>;
+			clocks = <&sleep_clk>;
+			clock-names = "sleep";
+			cpu-offset = <0x80000>;
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon";
+			reg = <0x02011000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu0_aux";
+			#clock-cells = <0>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		nss_common: syscon@3000000 {
+			compatible = "syscon";
+			reg = <0x03000000 0x0000FFFF>;
+		};
+
+		usb3_0: usb@100f8800 {
+			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x100f8800 0x8000>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "core";
+
+			ranges;
+
+			resets = <&gcc USB30_0_MASTER_RESET>;
+			reset-names = "master";
+
+			status = "disabled";
+
+			dwc3_0: usb@10000000 {
+				compatible = "snps,dwc3";
+				reg = <0x10000000 0xcd00>;
+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hs_phy_0>, <&ss_phy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		hs_phy_0: phy@100f8800 {
+			compatible = "qcom,ipq806x-usb-phy-hs";
+			reg = <0x100f8800 0x30>;
+			clocks = <&gcc USB30_0_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ss_phy_0: phy@100f8830 {
+			compatible = "qcom,ipq806x-usb-phy-ss";
+			reg = <0x100f8830 0x30>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb3_1: usb@110f8800 {
+			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x110f8800 0x8000>;
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			clock-names = "core";
+
+			ranges;
+
+			resets = <&gcc USB30_1_MASTER_RESET>;
+			reset-names = "master";
+
+			status = "disabled";
+
+			dwc3_1: usb@11000000 {
+				compatible = "snps,dwc3";
+				reg = <0x11000000 0xcd00>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hs_phy_1>, <&ss_phy_1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		hs_phy_1: phy@110f8800 {
+			compatible = "qcom,ipq806x-usb-phy-hs";
+			reg = <0x110f8800 0x30>;
+			clocks = <&gcc USB30_1_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ss_phy_1: phy@110f8830 {
+			compatible = "qcom,ipq806x-usb-phy-ss";
+			reg = <0x110f8830 0x30>;
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		sdcc3bam: dma-controller@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc1bam: dma-controller@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		amba: amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sdcc3: mmc@12180000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x12180000 0x2000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <192000000>;
+				sd-uhs-sdr104;
+				sd-uhs-ddr50;
+				vqmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+				dma-names = "tx", "rx";
+			};
+
+			sdcc1: mmc@12400000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg = <0x12400000 0x2000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <96000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		gsbi1: gsbi@12440000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x12440000 0x100>;
+			cell-index = <1>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi1_serial: serial@12450000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x12450000 0x100>,
+				      <0x12400000 0x03>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+
+				status = "disabled";
+			};
+
+			gsbi1_i2c: i2c@12460000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x12460000 0x1000>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gsbi2: gsbi@12480000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <2>;
+			reg = <0x12480000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi2_serial: serial@12490000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x12490000 0x1000>,
+				      <0x12480000 0x1000>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi2_i2c: i2c@124a0000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x124a0000 0x1000>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi4: gsbi@16300000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x100>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi4_serial: serial@16340000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16340000 0x1000>,
+				      <0x16300000 0x1000>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			i2c@16380000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16380000 0x1000>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi6: gsbi@16500000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16500000 0x100>;
+			cell-index = <6>;
+			clocks = <&gcc GSBI6_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi6_i2c: i2c@16580000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			gsbi6_spi: spi@16580000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gsbi7: gsbi@16600000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <7>;
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			syscon-tcsr = <&tcsr>;
+
+			gsbi7_serial: serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi7_i2c: i2c@16680000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16680000 0x1000>;
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		adm_dma: dma-controller@18300000 {
+			compatible = "qcom,adm";
+			reg = <0x18300000 0x100000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+
+			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+			clock-names = "core", "iface";
+
+			resets = <&gcc ADM0_RESET>,
+				 <&gcc ADM0_PBUS_RESET>,
+				 <&gcc ADM0_C0_RESET>,
+				 <&gcc ADM0_C1_RESET>,
+				 <&gcc ADM0_C2_RESET>;
+			reset-names = "clk", "pbus", "c0", "c1", "c2";
+			qcom,ee = <0>;
+
+			status = "disabled";
+		};
+
+		gsbi5: gsbi@1a200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x1a200000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi5_serial: serial@1a240000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a240000 0x1000>,
+				      <0x1a200000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			i2c@1a280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-ipq8064", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
+		nand: nand-controller@1ac00000 {
+			compatible = "qcom,ipq806x-nand";
+			reg = <0x1ac00000 0x800>;
+
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+
+			clocks = <&gcc EBI2_CLK>,
+				 <&gcc EBI2_AON_CLK>;
+			clock-names = "core", "aon";
+
+			dmas = <&adm_dma 3>;
+			dma-names = "rxtx";
+			qcom,cmd-crci = <15>;
+			qcom,data-crci = <3>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		sata_phy: sata-phy@1b400000 {
+			compatible = "qcom,ipq806x-sata-phy";
+			reg = <0x1b400000 0x200>;
+
+			clocks = <&gcc SATA_PHY_CFG_CLK>;
+			clock-names = "cfg";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie0: pci@1b500000 {
+			compatible = "qcom,pcie-ipq8064";
+			reg = <0x1b500000 0x1000
+			       0x1b502000 0x80
+			       0x1b600000 0x100
+			       0x0ff00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */
+
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc PCIE_A_CLK>,
+				 <&gcc PCIE_H_CLK>,
+				 <&gcc PCIE_PHY_CLK>,
+				 <&gcc PCIE_AUX_CLK>,
+				 <&gcc PCIE_ALT_REF_CLK>;
+			clock-names = "core", "iface", "phy", "aux", "ref";
+
+			assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc PCIE_ACLK_RESET>,
+				 <&gcc PCIE_HCLK_RESET>,
+				 <&gcc PCIE_POR_RESET>,
+				 <&gcc PCIE_PCI_RESET>,
+				 <&gcc PCIE_PHY_RESET>,
+				 <&gcc PCIE_EXT_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+			pinctrl-0 = <&pcie0_pins>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+		};
+
+		pcie1: pci@1b700000 {
+			compatible = "qcom,pcie-ipq8064";
+			reg = <0x1b700000 0x1000
+			       0x1b702000 0x80
+			       0x1b800000 0x100
+			       0x31f00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */
+
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc PCIE_1_A_CLK>,
+				 <&gcc PCIE_1_H_CLK>,
+				 <&gcc PCIE_1_PHY_CLK>,
+				 <&gcc PCIE_1_AUX_CLK>,
+				 <&gcc PCIE_1_ALT_REF_CLK>;
+			clock-names = "core", "iface", "phy", "aux", "ref";
+
+			assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc PCIE_1_ACLK_RESET>,
+				 <&gcc PCIE_1_HCLK_RESET>,
+				 <&gcc PCIE_1_POR_RESET>,
+				 <&gcc PCIE_1_PCI_RESET>,
+				 <&gcc PCIE_1_PHY_RESET>,
+				 <&gcc PCIE_1_EXT_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+			pinctrl-0 = <&pcie1_pins>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+		};
+
+		pcie2: pci@1b900000 {
+			compatible = "qcom,pcie-ipq8064";
+			reg = <0x1b900000 0x1000
+			       0x1b902000 0x80
+			       0x1ba00000 0x100
+			       0x35f00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */
+
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc PCIE_2_A_CLK>,
+				 <&gcc PCIE_2_H_CLK>,
+				 <&gcc PCIE_2_PHY_CLK>,
+				 <&gcc PCIE_2_AUX_CLK>,
+				 <&gcc PCIE_2_ALT_REF_CLK>;
+			clock-names = "core", "iface", "phy", "aux", "ref";
+
+			assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc PCIE_2_ACLK_RESET>,
+				 <&gcc PCIE_2_HCLK_RESET>,
+				 <&gcc PCIE_2_POR_RESET>,
+				 <&gcc PCIE_2_PCI_RESET>,
+				 <&gcc PCIE_2_PHY_RESET>,
+				 <&gcc PCIE_2_EXT_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+			pinctrl-0 = <&pcie2_pins>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+		};
+
+		qsgmii_csr: syscon@1bb00000 {
+			compatible = "syscon";
+			reg = <0x1bb00000 0x000001FF>;
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-ipq8064";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		lpass@28100000 {
+			compatible = "qcom,lpass-cpu";
+			status = "disabled";
+			clocks = <&lcc AHBIX_CLK>,
+					<&lcc MI2S_OSR_CLK>,
+					<&lcc MI2S_BIT_CLK>;
+			clock-names = "ahbix-clk",
+					"mi2s-osr-clk",
+					"mi2s-bit-clk";
+			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "lpass-irq-lpaif";
+			reg = <0x28100000 0x10000>;
+			reg-names = "lpass-lpaif";
+		};
+
+		sata: sata@29000000 {
+			compatible = "qcom,ipq806x-ahci", "generic-ahci";
+			reg = <0x29000000 0x180>;
+
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc SFAB_SATA_S_H_CLK>,
+				 <&gcc SATA_H_CLK>,
+				 <&gcc SATA_A_CLK>,
+				 <&gcc SATA_RXOOB_CLK>,
+				 <&gcc SATA_PMALIVE_CLK>;
+			clock-names = "slave_face", "iface", "core",
+					"rxoob", "pmalive";
+
+			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+			assigned-clock-rates = <100000000>, <100000000>;
+
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@37000000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+			reg = <0x37000000 0x200000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE1_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE1_RESET>,
+				 <&gcc GMAC_AHB_RESET>;
+			reset-names = "stmmaceth", "ahb";
+
+			status = "disabled";
+		};
+
+		gmac1: ethernet@37200000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+			reg = <0x37200000 0x200000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE2_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE2_RESET>,
+				 <&gcc GMAC_AHB_RESET>;
+			reset-names = "stmmaceth", "ahb";
+
+			status = "disabled";
+		};
+
+		gmac2: ethernet@37400000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+			reg = <0x37400000 0x200000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE3_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE3_RESET>,
+				 <&gcc GMAC_AHB_RESET>;
+			reset-names = "stmmaceth", "ahb";
+
+			status = "disabled";
+		};
+
+		gmac3: ethernet@37600000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+			reg = <0x37600000 0x200000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE4_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE4_RESET>,
+				 <&gcc GMAC_AHB_RESET>;
+			reset-names = "stmmaceth", "ahb";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8065-smb208.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8065-smb208.dtsi
new file mode 100644
index 0000000000000..803e6ff99ef8d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8065-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8065.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = <775000>;
+			regulator-max-microvolt = <1275000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = <775000>;
+			regulator-max-microvolt = <1275000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8065.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8065.dtsi
new file mode 100644
index 0000000000000..ea49f6cc416d7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8065.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8065";
+	compatible = "qcom,ipq8065", "qcom,ipq8064";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
new file mode 100644
index 0000000000000..b269fdca1460c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for mangOH Green Board with WP8548 Module
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/input/input.h>
+
+#include "qcom-mdm9615-wp8548.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MangOH Green with WP8548 Module";
+	compatible = "swir,mangoh-green-wp8548", "swir,wp8548", "qcom,mdm9615";
+
+	aliases {
+		spi0 = &gsbi3_spi;
+		serial0 = &gsbi4_serial;
+		serial1 = &gsbi5_serial;
+		i2c0 = &gsbi5_i2c;
+		mmc0 = &sdcc1;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&msmgpio {
+	/* MangOH GPIO Mapping :
+	 * - 2 : GPIOEXP_INT2
+	 * - 7 : IOT1_GPIO2
+	 * - 8 : IOT0_GPIO4
+	 * - 13: IOT0_GPIO3
+	 * - 21: IOT1_GPIO4
+	 * - 22: IOT2_GPIO1
+	 * - 23: IOT2_GPIO2
+	 * - 24: IOT2_GPIO3
+	 * - 25: IOT1_GPIO1
+	 * - 32: IOT1_GPIO3
+	 * - 33: IOT0_GPIO2
+	 * - 42: IOT0_GPIO1 and SD Card Detect
+	 */
+
+	gpioext1_pins: gpioext1-state {
+		gpioext1-pins {
+			pins = "gpio2";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	sdc_cd_pins: sdc-cd-state {
+		sdc-cd-pins {
+			pins = "gpio42";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&gsbi3_spi {
+	spi@0 {
+		compatible = "swir,mangoh-iotport-spi";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+	};
+};
+
+&gsbi5_i2c {
+	mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		i2c_iot0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_iot1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_iot2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			usbhub: hub@8 {
+				compatible = "smsc,usb3503a";
+				reg = <0x8>;
+				connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>;
+				intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>;
+				initial-mode = <1>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			gpioext0: pinctrl@3e {
+				/* GPIO Expander 0 Mapping :
+				 * - 0: ARDUINO_RESET_Level shift
+				 * - 1: BattChrgr_PG_N
+				 * - 2: BattGauge_GPIO
+				 * - 3: LED_ON (out active high)
+				 * - 4: ATmega_reset_GPIO
+				 * - 5: X
+				 * - 6: PCM_ANALOG_SELECT (out active high)
+				 * - 7: X
+				 * - 8: Board_rev_res1 (in)
+				 * - 9: Board_rev_res2 (in)
+				 * - 10: UART_EXP1_ENn (out active low / pull-down)
+				 * - 11: UART_EXP1_IN (out pull-down)
+				 * - 12: UART_EXP2_IN (out pull-down)
+				 * - 13: SDIO_SEL (out pull-down)
+				 * - 14: SPI_EXP1_ENn (out active low / pull-down)
+				 * - 15: SPI_EXP1_IN (out pull-down)
+				 */
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x3e>;
+				interrupt-parent = <&gpioext1>;
+				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+				semtech,probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			gpioext1: pinctrl@3f {
+				/* GPIO Expander 1 Mapping :
+				 * - 0: GPIOEXP_INT1
+				 * - 1: Battery detect
+				 * - 2: GPIO_SCF3_RESET
+				 * - 3: LED_CARD_DETECT_IOT0 (in)
+				 * - 4: LED_CARD_DETECT_IOT1 (in)
+				 * - 5: LED_CARD_DETECT_IOT2 (in)
+				 * - 6: UIM2_PWM_SELECT
+				 * - 7: UIM2_M2_S_SELECT
+				 * - 8: TP900
+				 * - 9: SENSOR_INT1 (in)
+				 * - 10: SENSOR_INT2 (in)
+				 * - 11: CARD_DETECT_IOT0 (in pull-up)
+				 * - 12: CARD_DETECT_IOT2 (in pull-up)
+				 * - 13: CARD_DETECT_IOT1 (in pull-up)
+				 * - 14: GPIOEXP_INT3 (in active low / pull-up)
+				 * - 15: BattChrgr_INT_N
+				 */
+				pinctrl-0 = <&gpioext1_pins>;
+				pinctrl-names = "default";
+
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x3f>;
+				interrupt-parent = <&msmgpio>;
+				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+				semtech,probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			gpioext2: pinctrl@70 {
+				/* GPIO Expander 2 Mapping :
+				 * - 0: USB_HUB_INTn
+				 * - 1: HUB_CONNECT
+				 * - 2: GPIO_IOT2_RESET (out active low / pull-up)
+				 * - 3: GPIO_IOT1_RESET (out active low / pull-up)
+				 * - 4: GPIO_IOT0_RESET (out active low / pull-up)
+				 * - 5: TP901
+				 * - 6: TP902
+				 * - 7: TP903
+				 * - 8: UART_EXP2_ENn (out active low / pull-down)
+				 * - 9: PCM_EXP1_ENn (out active low)
+				 * - 10: PCM_EXP1_SEL (out)
+				 * - 11: ARD_FTDI
+				 * - 12: TP904
+				 * - 13: TP905
+				 * - 14: TP906
+				 * - 15: RS232_Enable (out active high / pull-up)
+				 */
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x70>;
+				interrupt-parent = <&gpioext1>;
+				interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+
+				semtech,probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&sdcc1 {
+	pinctrl-0 = <&sdc_cd_pins>;
+	pinctrl-names = "default";
+	disable-wp;
+	cd-gpios = <&msmgpio 42 GPIO_ACTIVE_LOW>; /* Active low CD */
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
new file mode 100644
index 0000000000000..92c8003dac252
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Sierra Wireless WP8548 Module
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "qcom-mdm9615.dtsi"
+
+/ {
+	model = "Sierra Wireless WP8548 Module";
+	compatible = "swir,wp8548", "qcom,mdm9615";
+
+	memory@48000000 {
+		device_type = "memory";
+		reg = <0x48000000 0x7F00000>;
+	};
+};
+
+&msmgpio {
+	pinctrl-0 = <&reset_out_pins>;
+	pinctrl-names = "default";
+
+	gsbi3_pins: gsbi3-state {
+		gsbi3-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "gsbi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	gsbi4_pins: gsbi4-state {
+		gsbi4-pins {
+			pins = "gpio12", "gpio13", "gpio14", "gpio15";
+			function = "gsbi4";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	gsbi5_i2c_pins: gsbi5-i2c-state {
+		sda-pins {
+			pins = "gpio16";
+			function = "gsbi5_i2c";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		scl-pins {
+			pins = "gpio17";
+			function = "gsbi5_i2c";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	gsbi5_uart_pins: gsbi5-uart-state {
+		gsbi5-uart-pins {
+			pins = "gpio18", "gpio19";
+			function = "gsbi5_uart";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	reset_out_pins: reset-out-state {
+		reset-out-pins {
+			pins = "gpio66";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+};
+
+&pmicgpio {
+	usb_vbus_5v_pins: usb-vbus-5v-state {
+		pins = "gpio4";
+		function = "normal";
+		output-high;
+		bias-disable;
+		qcom,drive-strength = <1>;
+		power-source = <2>;
+	};
+};
+
+&gsbi3 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_SPI>;
+};
+
+&gsbi3_spi {
+	status = "okay";
+	pinctrl-0 = <&gsbi3_pins>;
+	pinctrl-names = "default";
+	assigned-clocks = <&gcc GSBI3_QUP_CLK>;
+	assigned-clock-rates = <24000000>;
+};
+
+&gsbi4 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_UART_W_FC>;
+};
+
+&gsbi4_serial {
+	status = "okay";
+	pinctrl-0 = <&gsbi4_pins>;
+	pinctrl-names = "default";
+};
+
+&gsbi5 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+};
+
+&gsbi5_i2c {
+	status = "okay";
+	clock-frequency = <200000>;
+	pinctrl-0 = <&gsbi5_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&gsbi5_serial {
+	status = "okay";
+	pinctrl-0 = <&gsbi5_uart_pins>;
+	pinctrl-names = "default";
+};
+
+&sdcc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
new file mode 100644
index 0000000000000..b40c52ddf9b44
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Qualcomm MDM9615 SoC
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
+#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm MDM9615";
+	compatible = "qcom,mdm9615";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+	};
+
+	regulators {
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		L2: cache-controller@2040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x02040000 0x1000>;
+			arm,data-latency = <2 2 0>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-wdt-mdm9615", "qcom,kpss-timer",
+				     "qcom,msm-timer";
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>;
+			cpu-offset = <0x80000>;
+		};
+
+		msmgpio: pinctrl@800000 {
+			compatible = "qcom,mdm9615-pinctrl";
+			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 88>;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x800000 0x4000>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-mdm9615";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-mdm9615";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon";
+			reg = <0x02011000 0x1000>;
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+			assigned-clocks = <&gcc PRNG_CLK>;
+			assigned-clock-rates = <32000000>;
+		};
+
+		gsbi2: gsbi@16100000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <2>;
+			reg = <0x16100000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi2_i2c: i2c@16180000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16180000 0x1000>;
+				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <3>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi3_spi: spi@16280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi4: gsbi@16300000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x100>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi4_serial: serial@16340000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16340000 0x1000>,
+				      <0x16300000 0x1000>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x16400000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi5_i2c: i2c@16480000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16480000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				/* QUP clock is not initialized, set rate */
+				assigned-clocks = <&gcc GSBI5_QUP_CLK>;
+				assigned-clock-rates = <24000000>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi5_serial: serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic {
+				compatible = "qcom,pm8018", "qcom,pm8921";
+				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pwrkey@1c {
+					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+						     <51 IRQ_TYPE_EDGE_RISING>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				pmicmpp: mpps@50 {
+					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pmicmpp 0 0 6>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+
+				pmicgpio: gpio@150 {
+					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
+					reg = <0x150>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					gpio-ranges = <&pmicgpio 0 0 6>;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+
+		sdcc1bam: dma-controller@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc2bam: dma-controller@12142000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12142000 0x8000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC2_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc1: mmc@12180000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12180000 0x2000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <48000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+			assigned-clocks = <&gcc SDC1_CLK>;
+			assigned-clock-rates = <400000>;
+		};
+
+		sdcc2: mmc@12140000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12140000 0x2000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <48000000>;
+			no-1-8-v;
+			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
+			dma-names = "tx", "rx";
+			assigned-clocks = <&gcc SDC2_CLK>;
+			assigned-clock-rates = <400000>;
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-mdm9615", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-mdm9615";
+			reg = <0x108000 0x1000>;
+
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8018-regulators";
+
+				vin_lvs1-supply = <&pm8018_s3>;
+
+				vdd_l7-supply = <&pm8018_s4>;
+				vdd_l8-supply = <&pm8018_s3>;
+				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+				/* Buck SMPS */
+				pm8018_s1: s1 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s2: s2 {
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s3: s3 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s4: s4 {
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s5: s5 {
+					regulator-always-on;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				/* PMOS LDO */
+				pm8018_l2: l2 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8018_l3: l3 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8018_l4: l4 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+
+				pm8018_l5: l5 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8018_l6: l6 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8018_l7: l7 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+
+				pm8018_l8: l8 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8018_l9: l9 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				pm8018_l10: l10 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l11: l11 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l12: l12 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l13: l13 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8018_l14: l14 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				pm8018_lvs1: lvs1 {
+					bias-pull-down;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-s3ve3g.dts
new file mode 100644
index 0000000000000..288cacd5d1fab
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-s3ve3g.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "qcom-msm8226.dtsi"
+
+/ {
+	model = "Samsung Galaxy S III Neo";
+	compatible = "samsung,s3ve3g", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
new file mode 100644
index 0000000000000..313a726f47047
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -0,0 +1,857 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,gcc-msm8974.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	chosen { };
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8226", "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_region: smem@3000000 {
+			reg = <0x3000000 0x100000>;
+			no-map;
+		};
+
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1900000>;
+			no-map;
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8226";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8226", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8226-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_region>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apcs: syscon@f9011000 {
+			compatible = "syscon";
+			reg = <0xf9011000 0x1000>;
+		};
+
+		sdhc_1: mmc@f9824900 {
+			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc1_default_state>;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@f98a4900 {
+			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc2_default_state>;
+			status = "disabled";
+		};
+
+		sdhc_3: mmc@f9864900 {
+			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc3_default_state>;
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@f991d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991d000 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart3: serial@f991f000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991f000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart4: serial@f9920000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf9920000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@f9923000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9923000 0x1000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c1_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c2: i2c@f9924000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9924000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c2_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c3: i2c@f9925000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9925000 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c3_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c4: i2c@f9926000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9926000 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c4_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c5: i2c@f9927000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9927000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c5_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		cci: cci@fda0c000 {
+			compatible = "qcom,msm8226-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfda0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		usb: usb@f9a55000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0xf9a55000 0x200>,
+			      <0xf9a55200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <75000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8226",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+						 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					qcom,init-seq = /bits/ 8 <0x0 0x44
+						0x1 0x68 0x2 0x24 0x3 0x13>;
+				};
+			};
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8226";
+			reg = <0xfc400000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>;
+			clock-names = "xo",
+				      "sleep_clk";
+		};
+
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8226";
+			reg = <0xfd8c0000 0x6000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
+				 <&gcc GPLL0_VOTE>,
+				 <&gcc GPLL1_VOTE>,
+				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "mmss_gpll0_vote",
+				      "gpll0_vote",
+				      "gpll1_vote",
+				      "gfx3d_clk_src",
+				      "dsi0pll",
+				      "dsi0pllbyte";
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8226-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 117>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			blsp1_i2c1_pins: blsp1-i2c1-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_pins: blsp1-i2c2-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_pins: blsp1-i2c3-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_pins: blsp1-i2c4-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c5_pins: blsp1-i2c5-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci_default: cci-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c0";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci_sleep: cci-sleep-state {
+				pins = "gpio29", "gpio30";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdhc1_default_state: sdhc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data-pins {
+					pins = "sdc1_cmd", "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc2_default_state: sdhc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data-pins {
+					pins = "sdc2_cmd", "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc3_default_state: sdhc3-default-state {
+				clk-pins {
+					pins = "gpio44";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "gpio43";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "gpio39", "gpio40", "gpio41", "gpio42";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		tsens: thermal-sensor@fc4a9000 {
+			compatible = "qcom,msm8226-tsens", "qcom,tsens-v0_1";
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2";
+			#qcom,sensors = <6>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		qfprom: qfprom@fc4bc000 {
+			compatible = "qcom,msm8226-qfprom", "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@1c1 {
+				reg = <0x1c1 0x2>;
+				bits = <5 8>;
+			};
+
+			tsens_s0_p1: s0-p1@1c2 {
+				reg = <0x1c2 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s1_p1: s1-p1@1c4 {
+				reg = <0x1c4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s2_p1: s2-p1@1c4 {
+				reg = <0x1c4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s3_p1: s3-p1@1c5 {
+				reg = <0x1c5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s4_p1: s4-p1@1c6 {
+				reg = <0x1c6 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s5_p1: s5-p1@1c7 {
+				reg = <0x1c7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s6_p1: s6-p1@1ca {
+				reg = <0x1ca 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_base2: base2@1cc {
+				reg = <0x1cc 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p2: s0-p2@1cd {
+				reg = <0x1cd 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p2: s1-p2@1cd {
+				reg = <0x1cd 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p2: s2-p2@1ce {
+				reg = <0x1ce 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p2: s3-p2@1cf {
+				reg = <0x1cf 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p2: s4-p2@446 {
+				reg = <0x446 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s5_p2: s5-p2@447 {
+				reg = <0x447 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s6_p2: s6-p2@44e {
+				reg = <0x44e 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_mode: mode@44f {
+				reg = <0x44f 0x1>;
+				bits = <5 3>;
+			};
+		};
+
+		spmi_bus: spmi@fc4cf000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg-names = "core", "intr", "cnfg";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		rng@f9bff000 {
+			compatible = "qcom,prng";
+			reg = <0xf9bff000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		timer@f9020000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		sram@fc190000 {
+			compatible = "qcom,msm8226-rpm-stats";
+			reg = <0xfc190000 0x10000>;
+		};
+
+		rpm_msg_ram: sram@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		adsp: remoteproc@fe200000 {
+			compatible = "qcom,msm8226-adsp-pil";
+			reg = <0xfe200000 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8226_VDDCX>;
+			power-domain-names = "cx";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 8>;
+				qcom,smd-edge = <1>;
+
+				label = "lpass";
+			};
+		};
+
+		sram@fe805000 {
+			compatible = "qcom,msm8226-imem", "syscon", "simple-mfd";
+			reg = <0xfe805000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+
+				mode-bootloader = <0x77665500>;
+				mode-normal     = <0x77665501>;
+				mode-recovery   = <0x77665502>;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 2
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
new file mode 100644
index 0000000000000..be18f1be29a17
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+
+#include "qcom-msm8660.dtsi"
+
+/ {
+	model = "Qualcomm MSM8660 SURF";
+	compatible = "qcom,msm8660-surf", "qcom,msm8660";
+
+	aliases {
+		serial0 = &gsbi12_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+};
+
+&gsbi12 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi12_serial {
+	status = "okay";
+};
+
+&pm8058 {
+	keypad@148 {
+		linux,keymap = <
+			MATRIX_KEY(0, 0, KEY_FN_F1)
+			MATRIX_KEY(0, 1, KEY_UP)
+			MATRIX_KEY(0, 2, KEY_LEFT)
+			MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+			MATRIX_KEY(1, 0, KEY_FN_F2)
+			MATRIX_KEY(1, 1, KEY_RIGHT)
+			MATRIX_KEY(1, 2, KEY_DOWN)
+			MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+			MATRIX_KEY(2, 3, KEY_ENTER)
+			MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+			MATRIX_KEY(4, 1, KEY_UP)
+			MATRIX_KEY(4, 2, KEY_LEFT)
+			MATRIX_KEY(4, 3, KEY_HOME)
+			MATRIX_KEY(4, 4, KEY_FN_F3)
+			MATRIX_KEY(5, 0, KEY_CAMERA)
+			MATRIX_KEY(5, 1, KEY_RIGHT)
+			MATRIX_KEY(5, 2, KEY_DOWN)
+			MATRIX_KEY(5, 3, KEY_BACK)
+			MATRIX_KEY(5, 4, KEY_MENU)
+			>;
+		keypad,num-rows = <6>;
+		keypad,num-columns = <5>;
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&vsdcc_fixed>;
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&vsdcc_fixed>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
new file mode 100644
index 0000000000000..78023ed2fdf71
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -0,0 +1,651 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm MSM8660";
+	compatible = "qcom,msm8660";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "qcom,scorpion";
+			enable-method = "qcom,gcc-msm8660";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,scorpion";
+			enable-method = "qcom,gcc-msm8660";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	cpu-pmu {
+		compatible = "qcom,scorpion-mp-pmu";
+		interrupts = <1 9 0x304>;
+	};
+
+	clocks {
+		cxo_board: cxo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "cxo_board";
+		};
+
+		pxo_board: pxo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+			clock-output-names = "pxo_board";
+		};
+
+		sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&xoadc 0x00 0x01>, /* Battery */
+			    <&xoadc 0x00 0x02>, /* DC in (charger) */
+			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
+			    <&xoadc 0x00 0x0b>, /* Die temperature */
+			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2080000 {
+			compatible = "qcom,msm-8660-qgic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = < 0x02080000 0x1000 >,
+			      < 0x02081000 0x1000 >;
+		};
+
+		timer@2000000 {
+			compatible = "qcom,scss-timer", "qcom,msm-timer";
+			interrupts = <1 0 0x301>,
+				     <1 1 0x301>,
+				     <1 2 0x301>;
+			reg = <0x02000000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x40000>;
+		};
+
+		tlmm: pinctrl@800000 {
+			compatible = "qcom,msm8660-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 173>;
+			#gpio-cells = <2>;
+			interrupts = <0 16 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-msm8660";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+			clocks = <&pxo_board>, <&cxo_board>;
+			clock-names = "pxo", "cxo";
+		};
+
+		gsbi1: gsbi@16000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16000000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi1_spi: spi@16080000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x16080000 0x1000>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+			status = "disabled";
+
+			gsbi3_i2c: i2c@16280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi6: gsbi@16500000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16500000 0x100>;
+			clocks = <&gcc GSBI6_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi6_serial: serial@16540000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16540000 0x1000>,
+				      <0x16500000 0x1000>;
+				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi6_i2c: i2c@16580000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi7: gsbi@16600000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi7_serial: serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi7_i2c: i2c@16680000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16680000 0x1000>;
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi8: gsbi@19800000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x19800000 0x100>;
+			clocks = <&gcc GSBI8_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+			status = "disabled";
+
+			gsbi8_i2c: i2c@19880000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x19880000 0x1000>;
+				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi12: gsbi@19c00000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x19c00000 0x100>;
+			clocks = <&gcc GSBI12_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi12_serial: serial@19c40000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x19c40000 0x1000>,
+				      <0x19c00000 0x1000>;
+				interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi12_i2c: i2c@19c80000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x19c80000 0x1000>;
+				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		ebi2: external-bus@1a100000 {
+			compatible = "qcom,msm8660-ebi2";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x1a800000 0x00800000>,
+				 <1 0x0 0x1b000000 0x00800000>,
+				 <2 0x0 0x1b800000 0x00800000>,
+				 <3 0x0 0x1d000000 0x08000000>,
+				 <4 0x0 0x1c800000 0x00800000>,
+				 <5 0x0 0x1c000000 0x00800000>;
+			reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
+			reg-names = "ebi2", "xmem";
+			clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
+			clock-names = "ebi2x", "ebi2";
+			status = "disabled";
+		};
+
+		ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pm8058: pmic {
+				compatible = "qcom,pm8058";
+				interrupt-parent = <&tlmm>;
+				interrupts = <88 8>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pm8058_gpio: gpio@150 {
+					compatible = "qcom,pm8058-gpio",
+						     "qcom,ssbi-gpio";
+					reg = <0x150>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					gpio-ranges = <&pm8058_gpio 0 0 44>;
+					#gpio-cells = <2>;
+
+				};
+
+				pm8058_mpps: mpps@50 {
+					compatible = "qcom,pm8058-mpp",
+						     "qcom,ssbi-mpp";
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pm8058_mpps 0 0 12>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pwrkey@1c {
+					compatible = "qcom,pm8058-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pm8058>;
+					interrupts = <50 1>, <51 1>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				pm8058_keypad: keypad@148 {
+					compatible = "qcom,pm8058-keypad";
+					reg = <0x148>;
+					interrupt-parent = <&pm8058>;
+					interrupts = <74 1>, <75 1>;
+					debounce = <15>;
+					scan-delay = <32>;
+					row-hold = <91500>;
+				};
+
+				xoadc: xoadc@197 {
+					compatible = "qcom,pm8058-adc";
+					reg = <0x197>;
+					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+					#io-channel-cells = <2>;
+
+					vcoin: adc-channel@0 {
+						reg = <0x00 0x00>;
+					};
+					vbat: adc-channel@1 {
+						reg = <0x00 0x01>;
+					};
+					dcin: adc-channel@2 {
+						reg = <0x00 0x02>;
+					};
+					ichg: adc-channel@3 {
+						reg = <0x00 0x03>;
+					};
+					vph_pwr: adc-channel@4 {
+						reg = <0x00 0x04>;
+					};
+					usb_vbus: adc-channel@a {
+						reg = <0x00 0x0a>;
+					};
+					die_temp: adc-channel@b {
+						reg = <0x00 0x0b>;
+					};
+					ref_625mv: adc-channel@c {
+						reg = <0x00 0x0c>;
+					};
+					ref_1250mv: adc-channel@d {
+						reg = <0x00 0x0d>;
+					};
+					ref_325mv: adc-channel@e {
+						reg = <0x00 0x0e>;
+					};
+					ref_muxoff: adc-channel@f {
+						reg = <0x00 0x0f>;
+					};
+				};
+
+				rtc@1e8 {
+					compatible = "qcom,pm8058-rtc";
+					reg = <0x1e8>;
+					interrupt-parent = <&pm8058>;
+					interrupts = <39 1>;
+					allow-set-time;
+				};
+
+				vibrator@4a {
+					compatible = "qcom,pm8058-vib";
+					reg = <0x4a>;
+				};
+
+				pm8058_led48: led@48 {
+					compatible = "qcom,pm8058-keypad-led";
+					reg = <0x48>;
+					status = "disabled";
+				};
+
+				pm8058_led131: led@131 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x131>;
+					status = "disabled";
+				};
+
+				pm8058_led132: led@132 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x132>;
+					status = "disabled";
+				};
+
+				pm8058_led133: led@133 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x133>;
+					status = "disabled";
+				};
+
+			};
+		};
+
+		l2cc: clock-controller@2082000 {
+			compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon";
+			reg = <0x02082000 0x1000>;
+		};
+
+		rpm: rpm@104000 {
+			compatible = "qcom,rpm-msm8660";
+			reg = <0x00104000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
+			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+			clock-names = "ram";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
+				#clock-cells = <1>;
+				clocks = <&pxo_board>;
+				clock-names = "pxo";
+			};
+
+			regulators-0 {
+				compatible = "qcom,rpm-pm8901-regulators";
+
+				pm8901_l0: l0 {};
+				pm8901_l1: l1 {};
+				pm8901_l2: l2 {};
+				pm8901_l3: l3 {};
+				pm8901_l4: l4 {};
+				pm8901_l5: l5 {};
+				pm8901_l6: l6 {};
+
+				/* S0 and S1 Handled as SAW regulators by SPM */
+				pm8901_s2: s2 {};
+				pm8901_s3: s3 {};
+				pm8901_s4: s4 {};
+
+				pm8901_lvs0: lvs0 {};
+				pm8901_lvs1: lvs1 {};
+				pm8901_lvs2: lvs2 {};
+				pm8901_lvs3: lvs3 {};
+
+				pm8901_mvs: mvs {};
+			};
+
+			regulators-1 {
+				compatible = "qcom,rpm-pm8058-regulators";
+
+				pm8058_l0: l0 {};
+				pm8058_l1: l1 {};
+				pm8058_l2: l2 {};
+				pm8058_l3: l3 {};
+				pm8058_l4: l4 {};
+				pm8058_l5: l5 {};
+				pm8058_l6: l6 {};
+				pm8058_l7: l7 {};
+				pm8058_l8: l8 {};
+				pm8058_l9: l9 {};
+				pm8058_l10: l10 {};
+				pm8058_l11: l11 {};
+				pm8058_l12: l12 {};
+				pm8058_l13: l13 {};
+				pm8058_l14: l14 {};
+				pm8058_l15: l15 {};
+				pm8058_l16: l16 {};
+				pm8058_l17: l17 {};
+				pm8058_l18: l18 {};
+				pm8058_l19: l19 {};
+				pm8058_l20: l20 {};
+				pm8058_l21: l21 {};
+				pm8058_l22: l22 {};
+				pm8058_l23: l23 {};
+				pm8058_l24: l24 {};
+				pm8058_l25: l25 {};
+
+				pm8058_s0: s0 {};
+				pm8058_s1: s1 {};
+				pm8058_s2: s2 {};
+				pm8058_s3: s3 {};
+				pm8058_s4: s4 {};
+
+				pm8058_lvs0: lvs0 {};
+				pm8058_lvs1: lvs1 {};
+
+				pm8058_ncp: ncp {};
+			};
+		};
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			sdcc1: mmc@12400000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg = <0x12400000 0x8000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <48000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+			};
+
+			sdcc2: mmc@12140000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg = <0x12140000 0x8000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <48000000>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+			};
+
+			sdcc3: mmc@12180000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x12180000 0x8000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <48000000>;
+				no-1-8-v;
+			};
+
+			sdcc4: mmc@121c0000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x121c0000 0x8000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
+				max-frequency = <48000000>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+			};
+
+			sdcc5: mmc@12200000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x12200000 0x8000>;
+				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <48000000>;
+			};
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-msm8660", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+	};
+
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-e5.dts b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-e5.dts
new file mode 100644
index 0000000000000..c8d34de8a71e4
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-e5.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-e5.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-e7.dts b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-e7.dts
new file mode 100644
index 0000000000000..85be286c86083
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-e7.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-e7.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-grandmax.dts b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-grandmax.dts
new file mode 100644
index 0000000000000..d3abe0536238c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-grandmax.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-grandmax.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-serranove.dts b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-serranove.dts
new file mode 100644
index 0000000000000..dee2c20af3553
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-serranove.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-serranove.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi
new file mode 100644
index 0000000000000..36328dbe4212b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/ {
+	cpus {
+		cpu@0 {
+			enable-method = "qcom,msm8916-smp";
+		};
+		cpu@1 {
+			enable-method = "qcom,msm8916-smp";
+		};
+		cpu@2 {
+			enable-method = "qcom,msm8916-smp";
+		};
+		cpu@3 {
+			enable-method = "qcom,msm8916-smp";
+		};
+
+		idle-states {
+			/delete-property/ entry-method;
+		};
+	};
+
+	psci {
+		status = "disabled";
+	};
+};
+
+&CPU_SLEEP_0 {
+	compatible = "qcom,idle-state-spc";
+};
+
+&cpu0_acc {
+	status = "okay";
+};
+
+&cpu0_saw {
+	status = "okay";
+};
+
+&cpu1_acc {
+	status = "okay";
+};
+
+&cpu1_saw {
+	status = "okay";
+};
+
+&cpu2_acc {
+	status = "okay";
+};
+
+&cpu2_saw {
+	status = "okay";
+};
+
+&cpu3_acc {
+	status = "okay";
+};
+
+&cpu3_saw {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
new file mode 100644
index 0000000000000..6c1bc3818883c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+
+#include "qcom-msm8960.dtsi"
+
+/ {
+	model = "Qualcomm MSM8960 CDP";
+	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
+
+	aliases {
+		serial0 = &gsbi5_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_l2: gpio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ext_l2";
+		gpio = <&msmgpio 91 0>;
+		startup-delay-us = <10000>;
+		enable-active-high;
+	};
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_default>;
+	status = "okay";
+};
+
+&gsbi1_spi {
+	status = "okay";
+
+	ethernet@0 {
+		compatible = "micrel,ks8851";
+		reg = <0>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <90 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <5400000>;
+		vdd-supply = <&ext_l2>;
+		vdd-io-supply = <&pm8921_lvs6>;
+		reset-gpios = <&msmgpio 89 0>;
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi5_serial {
+	status = "okay";
+};
+
+&msmgpio {
+	spi1_default: spi1-default-state {
+		 mosi-pins {
+			pins = "gpio6";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		 };
+
+		 miso-pins {
+			pins = "gpio7";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		 };
+
+		 cs-pins {
+			pins = "gpio8";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+			output-low;
+		 };
+
+		 clk-pins {
+			pins = "gpio9";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		 };
+	};
+};
+
+&pmicintc {
+	keypad@148 {
+		linux,keymap = <
+			MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+			MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+			MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+			MATRIX_KEY(0, 3, KEY_CAMERA)
+			>;
+		keypad,num-rows = <1>;
+		keypad,num-columns = <5>;
+	};
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+		vdd_ncp-supply = <&pm8921_l6>;
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l21_l23_l29-supply = <&pm8921_s8>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		pm8921_s4: s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s8: s8 {
+			regulator-always-on;
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8921_l1: l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		pm8921_l4: l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l7: l7 {
+			regulator-always-on;
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l8: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l10: l10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8921_l12: l12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l16: l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l17: l17 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l18: l18 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			bias-pull-down;
+		};
+
+		pm8921_l21: l21 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8921_l22: l22 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+			bias-pull-down;
+		};
+
+		pm8921_l23: l23 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l24: l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8921_l25: l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs2: lvs2 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs3: lvs3 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+
+		pm8921_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
new file mode 100644
index 0000000000000..13e85c2874987
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+
+#include "qcom-msm8960.dtsi"
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+
+/ {
+	model = "Samsung Galaxy Express SGH-I437";
+	compatible = "samsung,expressatt", "qcom,msm8960";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &gsbi5_serial;
+		mmc0 = &sdcc1; /* SDCC1 eMMC slot */
+		mmc1 = &sdcc3; /* SDCC3 SD card slot */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi5_serial {
+	status = "okay";
+};
+
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	status = "okay";
+};
+
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	vqmmc-supply = <&pm8921_l7>;
+	status = "okay";
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	pinctrl-0 = <&spi1_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gsbi1_spi {
+	status = "okay";
+};
+
+&msmgpio {
+	spi1_default: spi1-default-state {
+		mosi-pins {
+			pins = "gpio6";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		miso-pins {
+			pins = "gpio7";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		cs-pins {
+			pins = "gpio8";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+			output-low;
+		};
+
+		clk-pins {
+			pins = "gpio9";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		};
+	};
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+		vdd_ncp-supply = <&pm8921_l6>;
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l21_l23_l29-supply = <&pm8921_s8>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		pm8921_s4: s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s8: s8 {
+			regulator-always-on;
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8921_l1: l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8921_l4: l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l7: l7 {
+			regulator-always-on;
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l8: l8 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3100000>;
+			bias-pull-down;
+		};
+
+		pm8921_l9: l9 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8921_l10: l10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8921_l12: l12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l16: l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l17: l17 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8921_l18: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			bias-pull-down;
+		};
+
+		pm8921_l21: l21 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8921_l22: l22 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+			bias-pull-down;
+		};
+
+		pm8921_l23: l23 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l24: l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8921_l25: l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs2: lvs2 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs3: lvs3 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+
+		pm8921_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
new file mode 100644
index 0000000000000..fa2013388d997
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm MSM8960";
+	compatible = "qcom,msm8960";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_PPI 14 0x304>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 10 0x304>;
+		qcom,no-pc-write;
+	};
+
+	clocks {
+		cxo_board: cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "cxo_board";
+		};
+
+		pxo_board: pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+			clock-output-names = "pxo_board";
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer",
+				     "qcom,msm-timer";
+			interrupts = <GIC_PPI 1 0x301>,
+				     <GIC_PPI 2 0x301>,
+				     <GIC_PPI 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>;
+			cpu-offset = <0x80000>;
+		};
+
+		msmgpio: pinctrl@800000 {
+			compatible = "qcom,msm8960-pinctrl";
+			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 152>;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x800000 0x4000>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-msm8960";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+			clocks = <&cxo_board>,
+				 <&pxo_board>,
+				 <&lcc PLL4>;
+			clock-names = "cxo", "pxo", "pll4";
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-msm8960";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL4_VOTE>,
+				 <0>,
+				 <0>, <0>,
+				 <0>, <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll4_vote",
+				      "mi2s_codec_clk",
+				      "codec_i2s_mic_codec_clk",
+				      "spare_i2s_mic_codec_clk",
+				      "codec_i2s_spkr_codec_clk",
+				      "spare_i2s_spkr_codec_clk",
+				      "pcm_codec_clk";
+		};
+
+		clock-controller@4000000 {
+			compatible = "qcom,mmcc-msm8960";
+			reg = <0x4000000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL3>,
+				 <&gcc PLL8_VOTE>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll3",
+				      "pll8_vote",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "dsi2pll",
+				      "dsi2pllbyte",
+				      "hdmipll";
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon";
+			reg = <0x2011000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
+		};
+
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-msm8960";
+			reg = <0x108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+			};
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu0_aux";
+			#clock-cells = <0>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x16400000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi5_serial: serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic {
+				compatible = "qcom,pm8921";
+				interrupt-parent = <&msmgpio>;
+				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pwrkey@1c {
+					compatible = "qcom,pm8921-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+						     <51 IRQ_TYPE_EDGE_RISING>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				keypad@148 {
+					compatible = "qcom,pm8921-keypad";
+					reg = <0x148>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
+						     <75 IRQ_TYPE_EDGE_RISING>;
+					debounce = <15>;
+					scan-delay = <32>;
+					row-hold = <91500>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8921-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+			};
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
+		sdcc3: mmc@12180000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12180000 0x8000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <192000000>;
+			no-1-8-v;
+			vmmc-supply = <&vsdcc_fixed>;
+		};
+
+		sdcc1: mmc@12400000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12400000 0x8000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <96000000>;
+			non-removable;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			vmmc-supply = <&vsdcc_fixed>;
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-msm8960", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		gsbi1: gsbi@16000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <1>;
+			reg = <0x16000000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi1_spi: spi@16080000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16080000 0x1000>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <24000000>;
+				cs-gpios = <&msmgpio 8 0>;
+
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		usb1: usb@12500000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x12500000 0x200>,
+			      <0x12500200 0x200>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
+			assigned-clock-rates = <60000000>;
+			resets = <&gcc USB_HS1_RESET>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			ahb-burst-config = <0>;
+			phys = <&usb_hs1_phy>;
+			phy-names = "usb-phy";
+			#reset-cells = <1>;
+			status = "disabled";
+
+			ulpi {
+				usb_hs1_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8960",
+						     "qcom,usb-hs-phy";
+					clocks = <&sleep_clk>, <&cxo_board>;
+					clock-names = "sleep", "ref";
+					resets = <&usb1 0>;
+					reset-names = "por";
+					#phy-cells = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
new file mode 100644
index 0000000000000..60bdfddeae69e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -0,0 +1,696 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "LGE MSM 8974 HAMMERHEAD";
+	compatible = "lge,hammerhead", "qcom,msm8974";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp2_uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	clk_pwm: pwm {
+		compatible = "clk-pwm";
+		clocks = <&mmcc CAMSS_GP1_CLK>;
+
+		pinctrl-0 = <&vibrator_pin>;
+		pinctrl-names = "default";
+
+		#pwm-cells = <2>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&clk_pwm 0 100000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&pm8941_l19>;
+		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_pin>;
+	};
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	charger: bq24192@6b {
+		compatible = "ti,bq24192";
+		reg = <0x6b>;
+		interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
+
+		omit-battery-class;
+
+		usb_otg_vbus: usb-otg-vbus { };
+	};
+
+	fuelgauge: max17048@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
+
+		maxim,double-soc;
+		maxim,rcomp = /bits/ 8 <0x4d>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fuelgauge_pin>;
+
+		maxim,alert-low-soc-level = <2>;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	synaptics@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
+
+		interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pin>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	avago_apds993@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8941_l17>;
+		vddio-supply = <&pm8941_lvs1>;
+		led-max-microamp = <100000>;
+		amstaos,proximity-diodes = <0>;
+	};
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	led-controller@38 {
+		compatible = "ti,lm3630a";
+		status = "okay";
+		reg = <0x38>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0 1>;
+			label = "lcd-backlight";
+			default-brightness = <200>;
+		};
+	};
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	mpu6515@68 {
+		compatible = "invensense,mpu6515";
+		reg = <0x68>;
+		interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>;
+		vddio-supply = <&pm8941_lvs1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mpu6515_pin>;
+
+		mount-matrix = "0", "-1", "0",
+				"-1", "0", "0",
+				"0", "0", "1";
+
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ak8963@f {
+				compatible = "asahi-kasei,ak8963";
+				reg = <0x0f>;
+				gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+				vid-supply = <&pm8941_lvs1>;
+				vdd-supply = <&pm8941_l17>;
+			};
+
+			bmp280@76 {
+				compatible = "bosch,bmp280";
+				reg = <0x76>;
+				vdda-supply = <&pm8941_lvs1>;
+				vddd-supply = <&pm8941_l17>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	status = "okay";
+};
+
+&blsp2_uart4 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pin>;
+
+		host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	vdda-supply = <&pm8941_l2>;
+	vdd-supply = <&pm8941_lvs3>;
+	vddio-supply = <&pm8941_l12>;
+
+	panel: panel@0 {
+		reg = <0>;
+		compatible = "lg,acx467akm-7";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pin>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+
+	vddio-supply = <&pm8941_l12>;
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	fuelgauge_pin: fuelgauge-int-state {
+		pins = "gpio9";
+		function = "normal";
+
+		bias-disable;
+		input-enable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_sleep_clk_pin: wl-sleep-clk-state {
+		pins = "gpio16";
+		function = "func2";
+
+		output-high;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_regulator_pin: wl-reg-active-state {
+		pins = "gpio17";
+		function = "normal";
+
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	otg {
+		gpio-hog;
+		gpios = <35 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "otg-gpio";
+	};
+};
+
+&pm8941_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <815000>;
+			regulator-max-microvolt = <900000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+
+		pm8941_lvs1: lvs1 {};
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8941_s3>;
+	non-removable;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+
+	bcrmf@1 {
+		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		brcm,drive-strength = <10>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_sleep_clk_pin>;
+	};
+};
+
+&tlmm {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	mpu6515_pin: mpu6515-state {
+		pins = "gpio73";
+		function = "gpio";
+		bias-disable;
+	};
+
+	touch_pin: touch-state {
+		int-pins {
+			pins = "gpio5";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		reset-pins {
+			pins = "gpio8";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	panel_pin: panel-state {
+		pins = "gpio12";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	bt_pin: bt-state {
+		hostwake-pins {
+			pins = "gpio42";
+			function = "gpio";
+		};
+
+		devwake-pins {
+			pins = "gpio62";
+			function = "gpio";
+		};
+
+		shutdown-pins {
+			pins = "gpio41";
+			function = "gpio";
+		};
+	};
+
+	vibrator_pin: vibrator-state {
+		core-pins {
+			pins = "gpio27";
+			function = "gp1_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		enable-pins {
+			pins = "gpio60";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	extcon = <&charger>, <&usb_id>;
+	vbus-supply = <&usb_otg_vbus>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts
new file mode 100644
index 0000000000000..9f2ab5c122d0b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"
+
+/ {
+	model = "Sony Xperia Z1 Compact";
+	compatible = "sony,xperia-amami", "qcom,msm8974";
+	chassis-type = "handset";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1300000>;
+	qcom,fast-charge-current-limit = <1300000>;
+	qcom,dc-current-limit = <1300000>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts
new file mode 100644
index 0000000000000..9028f17e5c4a7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"
+
+/ {
+	model = "Sony Xperia Z1";
+	compatible = "sony,xperia-honami", "qcom,msm8974";
+	chassis-type = "handset";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
new file mode 100644
index 0000000000000..68a2f9094e536
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@3e8e0000 {
+			compatible = "ramoops";
+			reg = <0x3e8e0000 0x200000>;
+
+			console-size = <0x100000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x80000>;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	synaptics@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_pin>;
+
+		syna,startup-delay-ms = <10>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			touchscreen-inverted-x;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	nfc@28 {
+		compatible = "nxp,pn544-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <59 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&pm8941_gpios 23 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_dma {
+	qcom,controlled-remotely;
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	/* sii8334 MHL HDMI bridge */
+};
+
+&pm8941_coincell {
+	status = "okay";
+	qcom,rset-ohms = <2100>;
+	qcom,vset-millivolts = <3000>;
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3", "gpio4", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+};
+
+&pm8941_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&pm8941_wled {
+	status = "okay";
+
+	qcom,cs-out;
+	qcom,current-limit = <20>;
+	qcom,current-boost-limit = <805>;
+	qcom,switching-freq = <1600>;
+	qcom,ovp = <29>;
+	qcom,num-strings = <2>;
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s4: s4 {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1500000>;
+	qcom,fast-charge-current-limit = <1500000>;
+	qcom,dc-current-limit = <1800000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,fast-charge-low-threshold-voltage = <3400000>;
+	qcom,auto-recharge-threshold-voltage = <4200000>;
+	qcom,minimum-input-voltage = <4300000>;
+};
+
+&tlmm {
+	ts_int_pin: touch-int-state {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		cd-pins {
+			pins = "gpio62";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
new file mode 100644
index 0000000000000..aeca504918a08
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -0,0 +1,2406 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interconnect/qcom,msm8974.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/reset/qcom,gcc-msm8974.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_PPI 9 0xf04>;
+
+		CPU0: cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		CPU1: cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		CPU2: cpu@2 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		CPU3: cpu@3 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			qcom,saw = <&saw_l2>;
+		};
+
+		idle-states {
+			CPU_SPC: spc {
+				compatible = "qcom,idle-state-spc",
+						"arm,idle-state";
+				entry-latency-us = <150>;
+				exit-latency-us = <200>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8974", "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 7 0xf04>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x5100000>;
+			no-map;
+		};
+
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x100000>;
+			no-map;
+		};
+
+		wcnss_region: wcnss@d200000 {
+			reg = <0x0d200000 0xa00000>;
+			no-map;
+		};
+
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1900000>;
+			no-map;
+		};
+
+		venus_region: memory@f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
+		};
+
+		tz_region: memory@fc00000 {
+			reg = <0x0fc00000 0x160000>;
+			no-map;
+		};
+
+		rfsa_mem: memory@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_region>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-2 = <&apcs 8 9>;
+		qcom,ipc-3 = <&apcs 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		adsp_smsm: adsp@2 {
+			reg = <2>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@7 {
+			reg = <7>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8974";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+			};
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		apcs: syscon@f9011000 {
+			compatible = "syscon";
+			reg = <0xf9011000 0x1000>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		saw0: power-controller@f9089000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw1: power-controller@f9099000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw2: power-controller@f90a9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw3: power-controller@f90b9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw_l2: power-controller@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		acc0: power-manager@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc1: power-manager@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc2: power-manager@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc3: power-manager@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		sdhc_1: mmc@f9824900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+		};
+
+		sdhc_3: mmc@f9864900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			bus-width = <4>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@f98a4900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			bus-width = <4>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@f991d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991d000 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@f991e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991e000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@f9923000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9923000 0x1000>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c1_default>;
+			pinctrl-1 = <&blsp1_i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c2: i2c@f9924000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9924000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c3: i2c@f9925000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9925000 0x1000>;
+			interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c6: i2c@f9928000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9928000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c6_default>;
+			pinctrl-1 = <&blsp1_i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_dma: dma-controller@f9944000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xf9944000 0x19000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_uart1: serial@f995d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995d000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_default>;
+			pinctrl-1 = <&blsp2_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp2_uart2: serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp2_uart4: serial@f9960000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf9960000 0x1000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_uart4_default>;
+			status = "disabled";
+		};
+
+		blsp2_i2c2: i2c@f9964000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9964000 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c2_default>;
+			pinctrl-1 = <&blsp2_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c5: i2c@f9967000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9967000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c5_default>;
+			pinctrl-1 = <&blsp2_i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c6: i2c@f9968000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9968000 0x1000>;
+			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c6_default>;
+			pinctrl-1 = <&blsp2_i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb: usb@f9a55000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0xf9a55000 0x200>,
+			      <0xf9a55200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <75000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs1_phy: phy-0 {
+					compatible = "qcom,usb-hs-phy-msm8974",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					status = "disabled";
+				};
+
+				usb_hs2_phy: phy-1 {
+					compatible = "qcom,usb-hs-phy-msm8974",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>;
+					reset-names = "phy", "por";
+					status = "disabled";
+				};
+			};
+		};
+
+		rng@f9bff000 {
+			compatible = "qcom,prng";
+			reg = <0xf9bff000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		pronto: remoteproc@fb204000 {
+			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+			reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_region>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			iris {
+				compatible = "qcom,wcn3680";
+
+				clocks = <&rpmcc RPM_SMD_CXO_A2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 17>;
+				qcom,smd-edge = <6>;
+
+				wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+					status = "disabled";
+
+					qcom,mmio = <&pronto>;
+
+					bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+							     <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		sram@fc190000 {
+			compatible = "qcom,msm8974-rpm-stats";
+			reg = <0xfc190000 0x10000>;
+		};
+
+		etf@fc307000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0xfc307000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&merger_out>;
+					};
+				};
+			};
+		};
+
+		tpiu@fc318000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0xfc318000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
+				 };
+			};
+		};
+
+		funnel@fc31a000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0xfc31a000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 0 - not-connected
+				 * 1 - connected trought funnel to Multimedia CPU
+				 * 2 - connected to Wireless CPU
+				 * 3 - not-connected
+				 * 4 - not-connected
+				 * 6 - not-connected
+				 * 7 - connected to STM
+				 */
+				port@5 {
+					reg = <5>;
+					funnel1_in5: endpoint {
+						remote-endpoint = <&kpss_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&merger_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@fc31b000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0xfc31b000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 0 - connected trought funnel to Audio, Modem and
+				 *     Resource and Power Manager CPU's
+				 * 2...7 - not-connected
+				 */
+				port@1 {
+					reg = <1>;
+					merger_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					merger_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+		};
+
+		replicator@fc31c000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0xfc31c000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etr@fc322000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0xfc322000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		etm@fc33c000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33c000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&kpss_in0>;
+					};
+				};
+			};
+		};
+
+		etm@fc33d000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33d000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&kpss_in1>;
+					};
+				};
+			};
+		};
+
+		etm@fc33e000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33e000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&kpss_in2>;
+					};
+				};
+			};
+		};
+
+		etm@fc33f000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33f000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&kpss_in3>;
+					};
+				};
+			};
+		};
+
+		/* KPSS funnel, only 4 inputs are used */
+		funnel@fc345000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0xfc345000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					kpss_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					kpss_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					kpss_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port@3 {
+					reg = <3>;
+					kpss_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					kpss_out: endpoint {
+						remote-endpoint = <&funnel1_in5>;
+					};
+				};
+			};
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8974";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x4000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>;
+			clock-names = "xo",
+				      "sleep_clk";
+		};
+
+		rpm_msg_ram: sram@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
+		bimc: interconnect@fc380000 {
+			reg = <0xfc380000 0x6a000>;
+			compatible = "qcom,msm8974-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		snoc: interconnect@fc460000 {
+			reg = <0xfc460000 0x4000>;
+			compatible = "qcom,msm8974-snoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		pnoc: interconnect@fc468000 {
+			reg = <0xfc468000 0x4000>;
+			compatible = "qcom,msm8974-pnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
+		};
+
+		ocmemnoc: interconnect@fc470000 {
+			reg = <0xfc470000 0x4000>;
+			compatible = "qcom,msm8974-ocmemnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+		};
+
+		mmssnoc: interconnect@fc478000 {
+			reg = <0xfc478000 0x4000>;
+			compatible = "qcom,msm8974-mmssnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&mmcc MMSS_S0_AXI_CLK>,
+			         <&mmcc MMSS_S0_AXI_CLK>;
+		};
+
+		cnoc: interconnect@fc480000 {
+			reg = <0xfc480000 0x4000>;
+			compatible = "qcom,msm8974-cnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
+		};
+
+		tsens: thermal-sensor@fc4a9000 {
+			compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_use_backup>,
+				      <&tsens_mode_backup>,
+				      <&tsens_base1_backup>, <&tsens_base2_backup>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>,
+				      <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>,
+				      <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>,
+				      <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>,
+				      <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>,
+				      <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>,
+				      <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>,
+				      <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>,
+				      <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>,
+				      <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>,
+				      <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>,
+				      <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "use_backup",
+					   "mode_backup",
+					   "base1_backup", "base2_backup",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2",
+					   "s0_p1_backup", "s0_p2_backup",
+					   "s1_p1_backup", "s1_p2_backup",
+					   "s2_p1_backup", "s2_p2_backup",
+					   "s3_p1_backup", "s3_p2_backup",
+					   "s4_p1_backup", "s4_p2_backup",
+					   "s5_p1_backup", "s5_p2_backup",
+					   "s6_p1_backup", "s6_p2_backup",
+					   "s7_p1_backup", "s7_p2_backup",
+					   "s8_p1_backup", "s8_p2_backup",
+					   "s9_p1_backup", "s9_p2_backup",
+					   "s10_p1_backup", "s10_p2_backup";
+			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		qfprom: qfprom@fc4bc000 {
+			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@d0 {
+				reg = <0xd0 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1: s0-p1@d1 {
+				reg = <0xd1 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p1: s1-p1@d2 {
+				reg = <0xd1 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p1: s2-p1@d2 {
+				reg = <0xd2 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p1: s3-p1@d3 {
+				reg = <0xd3 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1: s4-p1@d4 {
+				reg = <0xd4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p1: s5-p1@d4 {
+				reg = <0xd4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@d5 {
+				reg = <0xd5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p1: s7-p1@d6 {
+				reg = <0xd6 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s8_p1: s8-p1@d7 {
+				reg = <0xd7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_mode: mode@d7 {
+				reg = <0xd7 0x1>;
+				bits = <6 2>;
+			};
+
+			tsens_s9_p1: s9-p1@d8 {
+				reg = <0xd8 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s10_p1: s10_p1@d8 {
+				reg = <0xd8 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_base2: base2@d9 {
+				reg = <0xd9 0x2>;
+				bits = <4 8>;
+			};
+
+			tsens_s0_p2: s0-p2@da {
+				reg = <0xda 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s1_p2: s1-p2@db {
+				reg = <0xdb 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s2_p2: s2-p2@dc {
+				reg = <0xdc 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s3_p2: s3-p2@dc {
+				reg = <0xdc 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s4_p2: s4-p2@dd {
+				reg = <0xdd 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s5_p2: s5-p2@de {
+				reg = <0xde 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s6_p2: s6-p2@df {
+				reg = <0xdf 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@e0 {
+				reg = <0xe0 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s8_p2: s8-p2@e0 {
+				reg = <0xe0 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s9_p2: s9-p2@e1 {
+				reg = <0xe1 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s10_p2: s10_p2@e2 {
+				reg = <0xe2 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s5_p2_backup: s5-p2_backup@e3 {
+				reg = <0xe3 0x2>;
+				bits = <0 6>;
+			};
+
+			tsens_mode_backup: mode_backup@e3 {
+				reg = <0xe3 0x1>;
+				bits = <6 2>;
+			};
+
+			tsens_s6_p2_backup: s6-p2_backup@e4 {
+				reg = <0xe4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2_backup: s7-p2_backup@e4 {
+				reg = <0xe4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p2_backup: s8-p2_backup@e5 {
+				reg = <0xe5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s9_p2_backup: s9-p2_backup@e6 {
+				reg = <0xe6 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s10_p2_backup: s10_p2_backup@e7 {
+				reg = <0xe7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_base1_backup: base1_backup@440 {
+				reg = <0x440 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1_backup: s0-p1_backup@441 {
+				reg = <0x441 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p1_backup: s1-p1_backup@442 {
+				reg = <0x441 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p1_backup: s2-p1_backup@442 {
+				reg = <0x442 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p1_backup: s3-p1_backup@443 {
+				reg = <0x443 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1_backup: s4-p1_backup@444 {
+				reg = <0x444 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p1_backup: s5-p1_backup@444 {
+				reg = <0x444 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1_backup: s6-p1_backup@445 {
+				reg = <0x445 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p1_backup: s7-p1_backup@446 {
+				reg = <0x446 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_use_backup: use_backup@447 {
+				reg = <0x447 0x1>;
+				bits = <5 3>;
+			};
+
+			tsens_s8_p1_backup: s8-p1_backup@448 {
+				reg = <0x448 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p1_backup: s9-p1_backup@448 {
+				reg = <0x448 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s10_p1_backup: s10_p1_backup@449 {
+				reg = <0x449 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_base2_backup: base2_backup@44a {
+				reg = <0x44a 0x2>;
+				bits = <2 8>;
+			};
+
+			tsens_s0_p2_backup: s0-p2_backup@44b {
+				reg = <0x44b 0x3>;
+				bits = <2 6>;
+			};
+
+			tsens_s1_p2_backup: s1-p2_backup@44c {
+				reg = <0x44c 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s2_p2_backup: s2-p2_backup@44c {
+				reg = <0x44c 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s3_p2_backup: s3-p2_backup@44d {
+				reg = <0x44d 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s4_p2_backup: s4-p2_backup@44e {
+				reg = <0x44e 0x1>;
+				bits = <2 6>;
+			};
+		};
+
+		spmi_bus: spmi@fc4cf000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg-names = "core", "intr", "cnfg";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@fc834000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xfc834000 0x7000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+		};
+
+		remoteproc_mss: remoteproc@fc880000 {
+			compatible = "qcom,msm8974-mss-pil";
+			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_region>;
+			};
+
+			mpss {
+				memory-region = <&mpss_region>;
+			};
+
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&modem_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 12>;
+				qcom,smd-edge = <0>;
+
+				label = "modem";
+			};
+		};
+
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon";
+			reg = <0xfd484000 0x2000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@fd4a0000 {
+			compatible = "qcom,tcsr-msm8974", "syscon";
+			reg = <0xfd4a0000 0x10000>;
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8974-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			sdc1_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				cd-pins {
+					pins = "gpio54";
+					function = "gpio";
+					bias-disable;
+					drive-strength = <2>;
+				};
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				rx-pins {
+					pins = "gpio5";
+					function = "blsp_uart2";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				tx-pins {
+					pins = "gpio4";
+					function = "blsp_uart2";
+					drive-strength = <4>;
+					bias-disable;
+				};
+			};
+
+			blsp2_uart1_default: blsp2-uart1-default-state {
+				tx-rts-pins {
+					pins = "gpio41", "gpio44";
+					function = "blsp_uart7";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-cts-pins {
+					pins = "gpio42", "gpio43";
+					function = "blsp_uart7";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			blsp2_uart1_sleep: blsp2-uart1-sleep-state {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_uart4_default: blsp2-uart4-default-state {
+				tx-rts-pins {
+					pins = "gpio53", "gpio56";
+					function = "blsp_uart10";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-cts-pins {
+					pins = "gpio54", "gpio55";
+					function = "blsp_uart10";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			/* BLSP1_I2C4 info is missing */
+
+			/* BLSP1_I2C5 info is missing */
+
+			blsp1_i2c6_default: blsp1-i2c6-default-state {
+				pins = "gpio29", "gpio30";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
+				pins = "gpio29", "gpio30";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
+
+			/* BLSP2_I2C1 info is missing */
+
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			/* BLSP2_I2C3 info is missing */
+
+			/* BLSP2_I2C4 info is missing */
+
+			blsp2_i2c5_default: blsp2-i2c5-default-state {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c6_default: blsp2-i2c6-default-state {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci_default: cci-default-state {
+				cci_i2c0_default: cci-i2c0-default-pins {
+					pins = "gpio19", "gpio20";
+					function = "cci_i2c0";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cci_i2c1_default: cci-i2c1-default-pins {
+					pins = "gpio21", "gpio22";
+					function = "cci_i2c1";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cci_sleep: cci-sleep-state {
+				cci_i2c0_sleep: cci-i2c0-sleep-pins {
+					pins = "gpio19", "gpio20";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cci_i2c1_sleep: cci-i2c1-sleep-pins {
+					pins = "gpio21", "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			spi8_default: spi8_default-state {
+				mosi-pins {
+					pins = "gpio45";
+					function = "blsp_spi8";
+				};
+				miso-pins {
+					pins = "gpio46";
+					function = "blsp_spi8";
+				};
+				cs-pins {
+					pins = "gpio47";
+					function = "blsp_spi8";
+				};
+				clk-pins {
+					pins = "gpio48";
+					function = "blsp_spi8";
+				};
+			};
+		};
+
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8974";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfd8c0000 0x6000>;
+			clocks = <&xo_board>,
+				 <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
+				 <&gcc GPLL0_VOTE>,
+				 <&gcc GPLL1_VOTE>,
+				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "mmss_gpll0_vote",
+				      "gpll0_vote",
+				      "gpll1_vote",
+				      "gfx3d_clk_src",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "hdmipll",
+				      "edp_link_clk",
+				      "edp_vco_div";
+		};
+
+		mdss: display-subsystem@fd900000 {
+			compatible = "qcom,mdss";
+			reg = <0xfd900000 0x100>, <0xfd924000 0x1000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			clock-names = "iface", "bus", "vsync";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mdp: display-controller@fd900000 {
+				compatible = "qcom,msm8974-mdp5", "qcom,mdp5";
+				reg = <0xfd900100 0x22000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface", "bus", "core", "vsync";
+
+				interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
+				interconnect-names = "mdp0-mem";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@fd922800 {
+				compatible = "qcom,msm8974-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0xfd922800 0x1f8>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>,
+					 <&mmcc MMSS_MISC_AHB_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core",
+					      "core_mmss";
+
+				phys = <&mdss_dsi0_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@fd922a00 {
+				compatible = "qcom,dsi-phy-28nm-hpm";
+				reg = <0xfd922a00 0xd4>,
+				      <0xfd922b00 0x280>,
+				      <0xfd922d80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@fd922e00 {
+				compatible = "qcom,msm8974-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0xfd922e00 0x1f8>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_BYTE1_CLK>,
+					 <&mmcc MDSS_PCLK1_CLK>,
+					 <&mmcc MDSS_ESC1_CLK>,
+					 <&mmcc MMSS_MISC_AHB_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core",
+					      "core_mmss";
+
+				phys = <&mdss_dsi1_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@fd923000 {
+				compatible = "qcom,dsi-phy-28nm-hpm";
+				reg = <0xfd923000 0xd4>,
+				      <0xfd923100 0x280>,
+				      <0xfd923380 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		cci: cci@fda0c000 {
+			compatible = "qcom,msm8974-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfda0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gpu: adreno@fdb00000 {
+			compatible = "qcom,adreno-330.1", "qcom,adreno";
+			reg = <0xfdb00000 0x10000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&mmcc OXILI_GFX3D_CLK>,
+				 <&mmcc OXILICX_AHB_CLK>,
+				 <&mmcc OXILICX_AXI_CLK>;
+			clock-names = "core", "iface", "mem_iface";
+
+			sram = <&gmu_sram>;
+			power-domains = <&mmcc OXILICX_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
+					<&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
+			interconnect-names = "gfx-mem", "ocmem";
+
+			// iommus = <&gpu_iommu 0>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-27000000 {
+					opp-hz = /bits/ 64 <27000000>;
+				};
+			};
+		};
+
+		sram@fdd00000 {
+			compatible = "qcom,msm8974-ocmem";
+			reg = <0xfdd00000 0x2000>,
+			      <0xfec00000 0x180000>;
+			reg-names = "ctrl", "mem";
+			ranges = <0 0xfec00000 0x180000>;
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+				 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+			clock-names = "core", "iface";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gmu_sram: gmu-sram@0 {
+				reg = <0x0 0x100000>;
+			};
+		};
+
+		remoteproc_adsp: remoteproc@fe200000 {
+			compatible = "qcom,msm8974-adsp-pil";
+			reg = <0xfe200000 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 8>;
+				qcom,smd-edge = <1>;
+				label = "lpass";
+			};
+		};
+
+		imem: sram@fe805000 {
+			compatible = "qcom,msm8974-imem", "syscon", "simple-mfd";
+			reg = <0xfe805000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				q6_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modemtx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				modemtx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 2 0xf08>,
+			     <GIC_PPI 3 0xf08>,
+			     <GIC_PPI 4 0xf08>,
+			     <GIC_PPI 1 0xf08>;
+		clock-frequency = <19200000>;
+	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
new file mode 100644
index 0000000000000..f531d2679f6c5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Fairphone 2";
+	compatible = "fairphone,fp2", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&pm8941_l18>;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	touchscreen@41 {
+		compatible = "ilitek,ili2120";
+		reg = <0x41>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&imem {
+	reboot-mode {
+		mode-normal = <0x77665501>;
+		mode-bootloader = <0x77665500>;
+		mode-recovery = <0x77665502>;
+	};
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio1", "gpio2", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+};
+
+&pm8941_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pronto {
+	status = "okay";
+
+	vddmx-supply = <&pm8841_s1>;
+	vddcx-supply = <&pm8841_s2>;
+	vddpx-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wcnss_pin_a>;
+
+	iris {
+		vddxo-supply = <&pm8941_l6>;
+		vddrfa-supply = <&pm8941_l11>;
+		vddpa-supply = <&pm8941_l19>;
+		vdddig-supply = <&pm8941_s3>;
+	};
+
+	smd-edge {
+		qcom,remote-pid = <4>;
+		label = "pronto";
+
+		wcnss {
+			status = "okay";
+		};
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	cx-supply = <&pm8841_s2>;
+};
+
+&remoteproc_mss {
+	status = "okay";
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+};
+
+&smbb {
+	usb-charge-current-limit = <1500000>;
+	qcom,fast-charge-safe-current = <1500000>;
+	qcom,fast-charge-current-limit = <1500000>;
+	qcom,fast-charge-safe-voltage = <4380000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4240000>;
+	qcom,minimum-input-voltage = <4450000>;
+};
+
+&tlmm {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	wcnss_pin_a: wcnss-pin-active-state {
+		wlan-pins {
+			pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+			function = "wlan";
+
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		bt-pins {
+			pins = "gpio35", "gpio43", "gpio44";
+			function = "bt";
+
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		fm-pins {
+			pins = "gpio41", "gpio42";
+			function = "fm";
+
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
new file mode 100644
index 0000000000000..8230d0e1d95d1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -0,0 +1,512 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "OnePlus One";
+	compatible = "oneplus,bacon", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+	qcom,msm-id = <194 0x10000>;
+	qcom,board-id = <8 0>;
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>, <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			debounce-interval = <150>;
+		};
+	};
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+		power-supplies = <&bq24196_charger>;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	rmi4-i2c-dev@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		syna,startup-delay-ms = <100>;
+
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_default_state>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			/*
+			 * Touchscreen size is 2040x1080, y-values between
+			 * 1920-2040 are used for touchkey (menu, home & back).
+			 * For now clip it off so we don't get touch events
+			 * outside of the display area.
+			 */
+			syna,clip-y-high = <1920>;
+		};
+	};
+
+	led-controller@36 {
+		compatible = "ti,lm3630a";
+		reg = <0x36>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0 1>;
+			label = "lcd-backlight";
+			default-brightness = <80>;
+		};
+	};
+
+	led-controller@68 {
+		compatible = "si-en,sn3193";
+		reg = <0x68>;
+
+		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			label = "red:status";
+			led-max-microamp = <17500>;
+		};
+
+		led@2 {
+			reg = <2>;
+			label = "green:status";
+			led-max-microamp = <17500>;
+		};
+
+		led@3 {
+			reg = <3>;
+			label = "blue:status";
+			led-max-microamp = <17500>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	bq24196_charger: charger@6b {
+		compatible = "ti,bq24196";
+		reg = <0x6b>;
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+		omit-battery-class;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&gcc {
+	compatible = "qcom,gcc-msm8974pro-ac";
+};
+
+&pm8941_coincell {
+	qcom,rset-ohms = <800>;
+	qcom,vset-millivolts = <3200>;
+
+	status = "okay";
+};
+
+&pm8941_gpios {
+	gpio_keys_default: gpio-keys-active-state {
+		pins = "gpio2", "gpio5";
+		function = "normal";
+		input-enable;
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+};
+
+&pm8941_vib {
+	status = "okay";
+};
+
+&pronto {
+	vddmx-supply = <&pm8841_s1>;
+	vddcx-supply = <&pm8841_s2>;
+	vddpx-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wcnss_pin_a>;
+
+	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8941_l6>;
+		vddrfa-supply = <&pm8941_l11>;
+		vddpa-supply = <&pm8941_l19>;
+		vdddig-supply = <&pm8941_s3>;
+	};
+
+	smd-edge {
+		qcom,remote-pid = <4>;
+		label = "pronto";
+
+		wcnss {
+			status = "okay";
+		};
+	};
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <875000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <154000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio68";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	touch_default_state: touch-default-state {
+		int-pins {
+			pins = "gpio61";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		reset-pins {
+			pins = "gpio60";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	wcnss_pin_a: wcnss-pin-active-state {
+		wlan-pins {
+			pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+			function = "wlan";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		bt-pins {
+			pins = "gpio35", "gpio43", "gpio44";
+			function = "bt";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&usb {
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
new file mode 100644
index 0000000000000..3e2c86591ee2f
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -0,0 +1,810 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pma8084.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Samsung Galaxy S5";
+	compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_3; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-home {
+			label = "home_key";
+			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-gpio-touchkey {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_touchkey_pins>;
+
+		touchkey@20 {
+			compatible = "cypress,tm2-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&pma8084_gpios>;
+			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&touchkey_pin>;
+
+			vcc-supply = <&max77826_ldo15>;
+			vdd-supply = <&pma8084_l19>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+		};
+	};
+
+	i2c-gpio-led {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_led_gpioex_pins>;
+
+		i2c-gpio,delay-us = <2>;
+
+		gpio_expander: gpio@20 {
+			compatible = "nxp,pcal6416";
+			reg = <0x20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			vcc-supply = <&pma8084_s4>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpioex_pin>;
+
+			reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+		};
+
+		led-controller@30 {
+			compatible = "panasonic,an30259a";
+			reg = <0x30>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@2 {
+				reg = <2>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				reg = <3>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vreg_panel: panel-regulator {
+		compatible = "regulator-fixed";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_en_pin>;
+
+		regulator-name = "panel-vddr-reg";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/delete-node/ vreg-boost;
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupt-parent = <&pma8084_gpios>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&max77826_ldo13>;
+		vio-supply = <&pma8084_lvs2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pin>;
+
+		syna,startup-delay-ms = <100>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	pmic@60 {
+		reg = <0x60>;
+		compatible = "maxim,max77826";
+
+		regulators {
+			max77826_ldo1: LDO1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			max77826_ldo2: LDO2 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			max77826_ldo3: LDO3 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			max77826_ldo4: LDO4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo5: LDO5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo6: LDO6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo7: LDO7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo8: LDO8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo9: LDO9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo10: LDO10 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2950000>;
+			};
+
+			max77826_ldo11: LDO11 {
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2950000>;
+			};
+
+			max77826_ldo12: LDO12 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo13: LDO13 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo14: LDO14 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo15: LDO15 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_buck: BUCK {
+				regulator-min-microvolt = <1225000>;
+				regulator-max-microvolt = <1225000>;
+			};
+
+			max77826_buckboost: BUCKBOOST {
+				regulator-min-microvolt = <3400000>;
+				regulator-max-microvolt = <3400000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
+
+		maxim,double-soc;
+		maxim,rcomp = /bits/ 8 <0x56>;
+
+		interrupt-parent = <&pma8084_gpios>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fuelgauge_pin>;
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_pins_active>;
+	pinctrl-1 = <&blsp2_uart2_pins_sleep>;
+
+	bluetooth {
+		compatible = "brcm,bcm43540-bt";
+		max-speed = <3000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	vdda-supply = <&pma8084_l2>;
+	vdd-supply = <&pma8084_l22>;
+	vddio-supply = <&pma8084_l12>;
+
+	panel: panel@0 {
+		reg = <0>;
+		compatible = "samsung,s6e3fa2";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
+
+		iovdd-supply = <&pma8084_lvs4>;
+		vddr-supply = <&vreg_panel>;
+
+		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
+		te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+
+	vddio-supply = <&pma8084_l12>;
+};
+
+&pma8084_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	touchkey_pin: touchkey-int-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	touch_pin: touchscreen-int-state {
+		pins = "gpio8";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	panel_en_pin: panel-en-state {
+		pins = "gpio14";
+		function = "normal";
+		bias-pull-up;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	wlan_sleep_clk_pin: wlan-sleep-clk-state {
+		pins = "gpio16";
+		function = "func2";
+
+		output-high;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	panel_rst_pin: panel-rst-state {
+		pins = "gpio17";
+		function = "normal";
+		bias-disable;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	fuelgauge_pin: fuelgauge-int-state {
+		pins = "gpio21";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	cx-supply = <&pma8084_s2>;
+};
+
+&remoteproc_mss {
+	status = "okay";
+	cx-supply = <&pma8084_s2>;
+	mss-supply = <&pma8084_s6>;
+	mx-supply = <&pma8084_s1>;
+	pll-supply = <&pma8084_l12>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pma8084-regulators";
+
+		pma8084_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		pma8084_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pma8084_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pma8084_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pma8084_s6: s6 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pma8084_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pma8084_l3: l3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pma8084_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pma8084_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pma8084_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pma8084_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pma8084_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pma8084_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pma8084_l19: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pma8084_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pma8084_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pma8084_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pma8084_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pma8084_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pma8084_l25: l25 {
+			regulator-min-microvolt = <2100000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		pma8084_l26: l26 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pma8084_l27: l27 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_lvs1: lvs1 {};
+		pma8084_lvs2: lvs2 {};
+		pma8084_lvs3: lvs3 {};
+		pma8084_lvs4: lvs4 {};
+
+		pma8084_5vs1: 5vs1 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pma8084_l20>;
+	vqmmc-supply = <&pma8084_s4>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pma8084_s4>;
+	non-removable;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+
+	wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
+	};
+};
+
+&sdhc_3 {
+	status = "okay";
+	max-frequency = <100000000>;
+	vmmc-supply = <&pma8084_l21>;
+	vqmmc-supply = <&pma8084_l13>;
+
+	/*
+	 * cd-gpio is intentionally disabled. If enabled, an SD card
+	 * present during boot is not initialized correctly. Without
+	 * cd-gpios the driver resorts to polling, so hotplug works.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
+	/* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
+};
+
+&tlmm {
+	/* This seems suspicious, but somebody with this device should look into it. */
+	blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
+		pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		function = "blsp_uart8";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
+		pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	bt_pins: bt-pins-state {
+		hostwake-pins {
+			pins = "gpio75";
+			function = "gpio";
+			drive-strength = <16>;
+		};
+
+		devwake-pins {
+			pins = "gpio91";
+			function = "gpio";
+			drive-strength = <2>;
+		};
+	};
+
+	sdc1_on: sdhc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	sdc3_on: sdc3-on-state {
+		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+		function = "sdc3";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sdhc3_cd_pin: sdc3-cd-on-state {
+		pins = "gpio62";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_on: sdhc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	i2c_touchkey_pins: i2c-touchkey-state {
+		pins = "gpio95", "gpio96";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	i2c_led_gpioex_pins: i2c-led-gpioex-state {
+		pins = "gpio120", "gpio121";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	gpioex_pin: gpioex-state {
+		pins = "gpio145";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	wifi_pin: wifi-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	panel_te_pin: panel-state {
+		pins = "gpio12";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pma8084_l6>;
+	v3p3-supply = <&pma8084_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
new file mode 100644
index 0000000000000..154639d56f357
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia Z2 Tablet";
+	compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "tablet";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	vreg_bl_vddio: lcd-backlight-vddio {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bl_vddio";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		gpio = <&tlmm 69 0>;
+		enable-active-high;
+
+		vin-supply = <&pm8941_s3>;
+		startup-delay-us = <70000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_backlight_en_pin_a>;
+	};
+
+	vreg_vsp: lcd-dcdc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_vsp";
+		regulator-min-microvolt = <5600000>;
+		regulator-max-microvolt = <5600000>;
+
+		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_pin>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	synaptics@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_pin>;
+
+		syna,startup-delay-ms = <100>;
+
+		rmi-f01@1 {
+			reg = <0x1>;
+			syna,nosleep = <1>;
+		};
+
+		rmi-f11@11 {
+			reg = <0x11>;
+			syna,f11-flip-x = <1>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	lp8566_wled: backlight@2c {
+		compatible = "ti,lp8556";
+		reg = <0x2c>;
+		power-supply = <&vreg_bl_vddio>;
+
+		bl-name = "backlight";
+		dev-ctrl = /bits/ 8 <0x05>;
+		init-brt = /bits/ 8 <0x3f>;
+
+		rom-a0h {
+			rom-addr = /bits/ 8 <0xa0>;
+			rom-val = /bits/ 8 <0xff>;
+		};
+		rom-a1h {
+			rom-addr = /bits/ 8 <0xa1>;
+			rom-val = /bits/ 8 <0x3f>;
+		};
+		rom-a2h {
+			rom-addr = /bits/ 8 <0xa2>;
+			rom-val = /bits/ 8 <0x20>;
+		};
+		rom-a3h {
+			rom-addr = /bits/ 8 <0xa3>;
+			rom-val = /bits/ 8 <0x5e>;
+		};
+		rom-a4h {
+			rom-addr = /bits/ 8 <0xa4>;
+			rom-val = /bits/ 8 <0x02>;
+		};
+		rom-a5h {
+			rom-addr = /bits/ 8 <0xa5>;
+			rom-val = /bits/ 8 <0x04>;
+		};
+		rom-a6h {
+			rom-addr = /bits/ 8 <0xa6>;
+			rom-val = /bits/ 8 <0x80>;
+		};
+		rom-a7h {
+			rom-addr = /bits/ 8 <0xa7>;
+			rom-val = /bits/ 8 <0xf7>;
+		};
+		rom-a9h {
+			rom-addr = /bits/ 8 <0xa9>;
+			rom-val = /bits/ 8 <0x80>;
+		};
+		rom-aah {
+			rom-addr = /bits/ 8 <0xaa>;
+			rom-val = /bits/ 8 <0x0f>;
+		};
+		rom-aeh {
+			rom-addr = /bits/ 8 <0xae>;
+			rom-val = /bits/ 8 <0x0f>;
+		};
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
+
+		host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pm8941_coincell {
+	status = "okay";
+
+	qcom,rset-ohms = <2100>;
+	qcom,vset-millivolts = <3000>;
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	bt_reg_on_pin: bt-reg-on-state {
+		pins = "gpio16";
+		function = "normal";
+
+		output-low;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_sleep_clk_pin: wl-sleep-clk-state {
+		pins = "gpio17";
+		function = "func2";
+
+		output-high;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_regulator_pin: wl-reg-active-state {
+		pins = "gpio18";
+		function = "normal";
+
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
+		pins = "gpio20";
+		function = "normal";
+
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+		input-disable;
+		output-low;
+	};
+
+};
+
+&pm8941_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <154000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s4: s4 {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <500000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+};
+
+&sdhc_3 {
+	status = "okay";
+
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	non-removable;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc3_on>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bcrmf@1 {
+		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		brcm,drive-strength = <10>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_sleep_clk_pin>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1500000>;
+	qcom,fast-charge-current-limit = <1500000>;
+	qcom,dc-current-limit = <1800000>;
+	usb-charge-current-limit = <1800000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,fast-charge-low-threshold-voltage = <3400000>;
+	qcom,auto-recharge-threshold-voltage = <4200000>;
+	qcom,minimum-input-voltage = <4300000>;
+};
+
+&tlmm {
+	lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <10>;
+		output-low;
+		bias-disable;
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		cd-pins {
+			pins = "gpio62";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	sdc3_on: sdc3-on-state {
+		clk-pins {
+			pins = "gpio40";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio39";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio35", "gpio36", "gpio37", "gpio38";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	ts_int_pin: ts-int-pin-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	bt_host_wake_pin: bt-host-wake-state {
+		pins = "gpio95";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	bt_dev_wake_pin: bt-dev-wake-state {
+		pins = "gpio96";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974pro.dtsi
new file mode 100644
index 0000000000000..58df6e75ab6da
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+
+&gcc {
+	compatible = "qcom,gcc-msm8974pro";
+};
+
+&gpu {
+	compatible = "qcom,adreno-330.2", "qcom,adreno";
+};
+
+&sdhc_1 {
+	clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+		 <&gcc GCC_SDCC1_APPS_CLK>,
+		 <&xo_board>,
+		 <&gcc GCC_SDCC1_CDCCAL_FF_CLK>,
+		 <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>;
+	clock-names = "iface", "core", "xo", "cal", "sleep";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi
new file mode 100644
index 0000000000000..3b8ad28cecb0d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: BSD-3-Clause
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8226-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8226_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				crit {
+					temperature = <145000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm8226_0: pm8226@0 {
+		compatible = "qcom,pm8226", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8226_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		smbb: charger@1000 {
+			compatible = "qcom,pm8226-charger";
+			reg = <0x1000>;
+			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "chg-done",
+					  "chg-fast",
+					  "chg-trkl",
+					  "bat-temp-ok",
+					  "bat-present",
+					  "chg-gone",
+					  "usb-valid",
+					  "dc-valid";
+
+			chg_otg: otg-vbus { };
+		};
+
+		pm8226_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8226_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8226_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			adc-chan@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+			adc-chan@8 {
+				reg = <VADC_DIE_TEMP>;
+				label = "die_temp";
+			};
+			adc-chan@9 {
+				reg = <VADC_REF_625MV>;
+				label = "ref_625mv";
+			};
+			adc-chan@a {
+				reg = <VADC_REF_1250MV>;
+				label = "ref_1250mv";
+			};
+			adc-chan@e {
+				reg = <VADC_GND_REF>;
+			};
+			adc-chan@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		pm8226_iadc: adc@3600 {
+			compatible = "qcom,pm8226-iadc", "qcom,spmi-iadc";
+			reg = <0x3600>;
+			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8226_mpps: mpps@a000 {
+			compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8226_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8226_gpios: gpio@c000 {
+			compatible = "qcom,pm8226-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8226_gpios 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8226_1: pm8226@1 {
+		compatible = "qcom,pm8226", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8226_spmi_regulators: regulators {
+			compatible = "qcom,pm8226-regulators";
+		};
+
+		pm8226_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom/qcom-pm8841.dtsi
new file mode 100644
index 0000000000000..3bf2ce5c86a64
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-pm8841.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+
+/ {
+	thermal-zones {
+		pm8841-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8841_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				crit {
+					temperature = <140000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+
+	pm8841_0: pm8841@4 {
+		compatible = "qcom,pm8841", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8841_mpps: mpps@a000 {
+			compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8841_mpps 0 0 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8841_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	pm8841_1: pm8841@5 {
+		compatible = "qcom,pm8841", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi
new file mode 100644
index 0000000000000..b3e246bacd78c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+
+/ {
+	thermal-zones {
+		pm8941-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8941_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				crit {
+					temperature = <145000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+
+	pm8941_0: pm8941@0 {
+		compatible = "qcom,pm8941", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>,
+			      <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pwrkey@800 {
+			compatible = "qcom,pm8941-pwrkey";
+			reg = <0x800>;
+			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+		};
+
+		usb_id: usb-detect@900 {
+			compatible = "qcom,pm8941-misc";
+			reg = <0x900>;
+			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "usb_id";
+		};
+
+		smbb: charger@1000 {
+			compatible = "qcom,pm8941-charger";
+			reg = <0x1000>;
+			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "chg-done",
+					  "chg-fast",
+					  "chg-trkl",
+					  "bat-temp-ok",
+					  "bat-present",
+					  "chg-gone",
+					  "usb-valid",
+					  "dc-valid";
+
+			usb-otg-in-supply = <&pm8941_5vs1>;
+
+			chg_otg: otg-vbus { };
+		};
+
+		pm8941_gpios: gpio@c000 {
+			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8941_gpios 0 0 36>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			boost_bypass_n_pin: boost-bypass-state {
+				pins = "gpio21";
+				function = "normal";
+			};
+		};
+
+		pm8941_mpps: mpps@a000 {
+			compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8941_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8941_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8941_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+
+			adc-chan@6 {
+				reg = <VADC_VBAT_SNS>;
+			};
+
+			adc-chan@8 {
+				reg = <VADC_DIE_TEMP>;
+			};
+
+			adc-chan@9 {
+				reg = <VADC_REF_625MV>;
+			};
+
+			adc-chan@a {
+				reg = <VADC_REF_1250MV>;
+			};
+
+			adc-chan@e {
+				reg = <VADC_GND_REF>;
+			};
+
+			adc-chan@f {
+				reg = <VADC_VDD_VADC>;
+			};
+
+			adc-chan@30 {
+				reg = <VADC_LR_MUX1_BAT_THERM>;
+			};
+		};
+
+		pm8941_iadc: adc@3600 {
+			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
+			reg = <0x3600>;
+			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+			qcom,external-resistor-micro-ohms = <10000>;
+		};
+
+		pm8941_coincell: charger@2800 {
+			compatible = "qcom,pm8941-coincell";
+			reg = <0x2800>;
+			status = "disabled";
+		};
+	};
+
+	pm8941_1: pm8941@1 {
+		compatible = "qcom,pm8941", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8941_lpg: pwm {
+			compatible = "qcom,pm8941-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pm8941_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
+
+		pm8941_wled: wled@d800 {
+			compatible = "qcom,pm8941-wled";
+			reg = <0xd800>;
+			label = "backlight";
+
+			status = "disabled";
+		};
+
+		regulators {
+			compatible = "qcom,pm8941-regulators";
+			interrupts = <0x1 0x83 0x2 0>, <0x1 0x84 0x2 0>;
+			interrupt-names = "ocp-5vs1", "ocp-5vs2";
+			vin_5vs-supply = <&pm8941_5v>;
+
+			pm8941_5v: s4 {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-enable-ramp-delay = <500>;
+			};
+
+			pm8941_5vs1: 5vs1 {
+				regulator-enable-ramp-delay = <1000>;
+				regulator-pull-down;
+				regulator-over-current-protection;
+				qcom,ocp-max-retries = <10>;
+				qcom,ocp-retry-delay = <30>;
+				qcom,vs-soft-start-strength = <0>;
+				regulator-initial-mode = <1>;
+			};
+
+			pm8941_5vs2: 5vs2 {
+				regulator-enable-ramp-delay = <1000>;
+				regulator-pull-down;
+				regulator-over-current-protection;
+				qcom,ocp-max-retries = <10>;
+				qcom,ocp-retry-delay = <30>;
+				qcom,vs-soft-start-strength = <0>;
+				regulator-initial-mode = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom/qcom-pma8084.dtsi
new file mode 100644
index 0000000000000..2dd4c6aa71c9e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-pma8084.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pma8084_0: pma8084@0 {
+		compatible = "qcom,pma8084", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>,
+			      <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pwrkey@800 {
+			compatible = "qcom,pm8941-pwrkey";
+			reg = <0x800>;
+			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+		};
+
+		pma8084_gpios: gpio@c000 {
+			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pma8084_gpios 0 0 22>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pma8084_mpps: mpps@a000 {
+			compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pma8084_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pma8084_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+			io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+		};
+
+		pma8084_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			adc-chan@8 {
+				reg = <VADC_DIE_TEMP>;
+			};
+
+			adc-chan@9 {
+				reg = <VADC_REF_625MV>;
+			};
+
+			adc-chan@a {
+				reg = <VADC_REF_1250MV>;
+			};
+
+			adc-chan@c {
+				reg = <VADC_SPARE1>;
+			};
+
+			adc-chan@e {
+				reg = <VADC_GND_REF>;
+			};
+
+			adc-chan@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+	};
+
+	pma8084_1: pma8084@1 {
+		compatible = "qcom,pma8084", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom/qcom-pmx55.dtsi
new file mode 100644
index 0000000000000..e1b869480bbd9
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-pmx55.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@8 {
+		compatible = "qcom,pmx55", "qcom,spmi-pmic";
+		reg = <0x8 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+
+			status = "disabled";
+		};
+
+		pmx55_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x8 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmx55_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmx55_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x8 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			ref-gnd@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			vref-1p25@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			die-temp@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			chg-temp@9 {
+				reg = <ADC5_CHG_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+		};
+
+		pmx55_gpios: gpio@c000 {
+			compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmx55_gpios 0 0 11>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@9 {
+		compatible = "qcom,pmx55", "qcom,spmi-pmic";
+		reg = <0x9 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom/qcom-pmx65.dtsi
new file mode 100644
index 0000000000000..1c7fdf59c1f56
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-pmx65.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@1 {
+		compatible = "qcom,pmx65", "qcom,spmi-pmic";
+		reg = <1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmx65_temp: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmx65_gpios: gpio@8800 {
+			compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmx65_gpios 0 0 16>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
new file mode 100644
index 0000000000000..7e97ad5803d87
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "qcom-sdx55.dtsi"
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <arm64/qcom/pm8150b.dtsi>
+#include "qcom-pmx55.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SDX55 MTP";
+	compatible = "qcom,sdx55-mtp", "qcom,sdx55";
+	qcom,board-id = <0x5010008 0x0>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mpss_debug_mem: memory@8ef00000 {
+			no-map;
+			reg = <0x8ef00000 0x800000>;
+		};
+
+		ipa_fw_mem: memory@8fced000 {
+			no-map;
+			reg = <0x8fced000 0x10000>;
+		};
+
+		mpss_adsp_mem: memory@90c00000 {
+			no-map;
+			reg = <0x90c00000 0xd400000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_bob_3p3: pmx55-bob {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_s7e_mx_0p752: pmx55-s7e {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s7e_mx_0p752";
+		regulator-min-microvolt = <752000>;
+		regulator-max-microvolt = <752000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmx55-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-l1-l2-supply = <&vreg_s2e_1p224>;
+		vdd-l3-l9-supply = <&vreg_s3e_0p824>;
+		vdd-l4-l12-supply = <&vreg_s4e_1p904>;
+		vdd-l5-l6-supply = <&vreg_s4e_1p904>;
+		vdd-l7-l8-supply = <&vreg_s3e_0p824>;
+		vdd-l10-l11-l13-supply = <&vreg_bob_3p3>;
+		vdd-l14-supply = <&vreg_s7e_mx_0p752>;
+		vdd-l15-supply = <&vreg_s2e_1p224>;
+		vdd-l16-supply = <&vreg_s4e_1p904>;
+
+		vreg_s2e_1p224: smps2 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_s3e_0p824: smps3 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s4e_1p904: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1960000>;
+		};
+
+		vreg_l1e_bb_1p2: ldo1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo2 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo3 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l4e_bb_0p875: ldo4 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <872000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5e_bb_1p7: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo7 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo8 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo9 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10e_3p1: ldo10 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo13 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo14 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo15 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&remoteproc_mpss {
+	memory-region = <&mpss_adsp_mem>;
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+	vdda33-supply = <&vreg_l10e_3p1>;
+	vdda18-supply = <&vreg_l5e_bb_1p7>;
+};
+
+&usb_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
+	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
new file mode 100644
index 0000000000000..51058b0652797
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcom-sdx55.dtsi"
+#include "qcom-pmx55.dtsi"
+
+/ {
+	model = "Thundercomm T55 Development Kit";
+	compatible = "qcom,sdx55-t55", "qcom,sdx55";
+	qcom,board-id = <0xb010008 0x4>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mpss_debug_mem: memory@8ef00000 {
+			no-map;
+			reg = <0x8ef00000 0x800000>;
+		};
+
+		ipa_fw_mem: memory@8fced000 {
+			no-map;
+			reg = <0x8fced000 0x10000>;
+		};
+
+		mpss_adsp_mem: memory@90800000 {
+			no-map;
+			reg = <0x90800000 0xf800000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_bob_3p3: pmx55-bob {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_s7e_mx_0p752: pmx55-s7e {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s7e_mx_0p752";
+		regulator-min-microvolt = <752000>;
+		regulator-max-microvolt = <752000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_sd_vdd: sd-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_sd_vdd";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		vin-supply = <&vreg_vddpx_2>;
+	};
+
+	vreg_vddpx_2: vddpx-2 {
+		compatible = "regulator-gpio";
+		regulator-name = "vreg_vddpx_2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2850000>;
+		enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+		gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0>, <2850000 1>;
+		startup-delay-us = <200000>;
+		enable-active-high;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmx55-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-l1-l2-supply = <&vreg_s2e_1p224>;
+		vdd-l3-l9-supply = <&vreg_s3e_0p824>;
+		vdd-l4-l12-supply = <&vreg_s4e_1p904>;
+		vdd-l5-l6-supply = <&vreg_s4e_1p904>;
+		vdd-l7-l8-supply = <&vreg_s3e_0p824>;
+		vdd-l10-l11-l13-supply = <&vreg_bob_3p3>;
+		vdd-l14-supply = <&vreg_s7e_mx_0p752>;
+		vdd-l15-supply = <&vreg_s2e_1p224>;
+		vdd-l16-supply = <&vreg_s4e_1p904>;
+
+		vreg_s2e_1p224: smps2 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_s3e_0p824: smps3 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s4e_1p904: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1960000>;
+		};
+
+		vreg_l1e_bb_1p2: ldo1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo2 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo3 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l4e_bb_0p875: ldo4 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <872000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5e_bb_1p7: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo7 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo8 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo9 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10e_3p1: ldo10 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo13 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo14 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo15 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+
+	status = "okay";
+};
+
+&pcie_rc {
+	perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* efs2 partition is secured */
+		secure-regions = /bits/ 64 <0x500000 0xb00000>;
+	};
+};
+
+&remoteproc_mpss {
+	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
+};
+
+&tlmm {
+	pcie_default: pcie-default-state {
+		clkreq-pins {
+			pins = "gpio56";
+			function = "pcie_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio57";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-pins {
+		       pins = "gpio53";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+};
+
+&usb_hsphy {
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+	vdda33-supply = <&vreg_l10e_3p1>;
+	vdda18-supply = <&vreg_l5e_bb_1p7>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
+	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
new file mode 100644
index 0000000000000..8fadc6e70692a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcom-sdx55.dtsi"
+#include "qcom-pmx55.dtsi"
+
+/ {
+	model = "Telit FN980 TLB";
+	compatible = "qcom,sdx55-telit-fn980-tlb", "qcom,sdx55";
+	qcom,board-id = <0xb010008 0x0>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mpss_debug_mem: memory@8ef00000 {
+			no-map;
+			reg = <0x8ef00000 0x800000>;
+		};
+
+		ipa_fw_mem: memory@8fced000 {
+			no-map;
+			reg = <0x8fced000 0x10000>;
+		};
+
+		mpss_adsp_mem: memory@90800000 {
+			no-map;
+			reg = <0x90800000 0xf800000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_bob_3p3: pmx55-bob {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_s7e_mx_0p752: pmx55-s7e {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s7e_mx_0p752";
+		regulator-min-microvolt = <752000>;
+		regulator-max-microvolt = <752000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_sd_vdd: sd-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_sd_vdd";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		vin-supply = <&vreg_vddpx_2>;
+	};
+
+	vreg_vddpx_2: vddpx-2 {
+		compatible = "regulator-gpio";
+		regulator-name = "vreg_vddpx_2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2850000>;
+		enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+		gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0>, <2850000 1>;
+		startup-delay-us = <200000>;
+		enable-active-high;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmx55-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-l1-l2-supply = <&vreg_s2e_1p224>;
+		vdd-l3-l9-supply = <&vreg_s3e_0p824>;
+		vdd-l4-l12-supply = <&vreg_s4e_1p904>;
+		vdd-l5-l6-supply = <&vreg_s4e_1p904>;
+		vdd-l7-l8-supply = <&vreg_s3e_0p824>;
+		vdd-l10-l11-l13-supply = <&vreg_bob_3p3>;
+		vdd-l14-supply = <&vreg_s7e_mx_0p752>;
+		vdd-l15-supply = <&vreg_s2e_1p224>;
+		vdd-l16-supply = <&vreg_s4e_1p904>;
+
+		vreg_s2e_1p224: smps2 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_s3e_0p824: smps3 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s4e_1p904: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1960000>;
+		};
+
+		vreg_l1e_bb_1p2: ldo1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo2 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo3 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l4e_bb_0p875: ldo4 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <872000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5e_bb_1p7: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo7 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo8 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo9 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10e_3p1: ldo10 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo13 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo14 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo15 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+
+	status = "okay";
+};
+
+&pcie_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default
+		     &pcie_ep_wake_default>;
+
+	reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* ico and efs2 partitions are secured */
+		secure-regions = /bits/ 64 <0x500000 0x500000
+					    0xa00000 0xb00000>;
+	};
+};
+
+&remoteproc_mpss {
+	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
+};
+
+&tlmm {
+	pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
+		pins = "gpio56";
+		function = "pcie_clkreq";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie_ep_perst_default: pcie-ep-perst-default-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	pcie_ep_wake_default: pcie-ep-wake-default-state {
+		pins = "gpio53";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb_hsphy {
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+	vdda33-supply = <&vreg_l10e_3p1>;
+	vdda18-supply = <&vreg_l5e_bb_1p7>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
+	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
new file mode 100644
index 0000000000000..df3cd9c4ffb93
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -0,0 +1,881 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX55 SoC device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Ltd.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdx55.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,sdx55.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>;
+	interrupt-parent = <&intc>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+
+		nand_clk_dummy: nand-clk-dummy {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			power-domains = <&rpmhpd SDX55_CX>;
+			power-domain-names = "rpmhpd";
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdx55", "qcom,scm";
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			required-opps = <&rpmhpd_opp_turbo>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		hyp_mem: memory@8fc00000 {
+			no-map;
+			reg = <0x8fc00000 0x80000>;
+		};
+
+		ac_db_mem: memory@8fc80000 {
+			no-map;
+			reg = <0x8fc80000 0x40000>;
+		};
+
+		secdata_mem: memory@8fcfd000 {
+			no-map;
+			reg = <0x8fcfd000 0x1000>;
+		};
+
+		sbl_mem: memory@8fd00000 {
+			no-map;
+			reg = <0x8fd00000 0x100000>;
+		};
+
+		aop_image: memory@8fe00000 {
+			no-map;
+			reg = <0x8fe00000 0x20000>;
+		};
+
+		aop_cmd_db: memory@8fe20000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x8fe20000 0x20000>;
+			no-map;
+		};
+
+		smem_mem: memory@8fe40000 {
+			no-map;
+			reg = <0x8fe40000 0xc0000>;
+		};
+
+		tz_mem: memory@8ff00000 {
+			no-map;
+			reg = <0x8ff00000 0x100000>;
+		};
+
+		tz_apps_mem: memory@90000000 {
+			no-map;
+			reg = <0x90000000 0x500000>;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdx55";
+			reg = <0x100000 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+		};
+
+		blsp1_uart3: serial@831000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x00831000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc 30>,
+				 <&gcc 9>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		usb_hsphy: phy@ff4000 {
+			compatible = "qcom,sdx55-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0x00ff4000 0x114>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_BCR>;
+		};
+
+		usb_qmpphy: phy@ff6000 {
+			compatible = "qcom,sdx55-qmp-usb3-uni-phy";
+			reg = <0x00ff6000 0x1c0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
+				 <&gcc GCC_USB3_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			usb_ssphy: phy@ff6200 {
+				reg = <0x00ff6200 0x170>,
+				      <0x00ff6400 0x200>,
+				      <0x00ff6800 0x800>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
+		mc_virt: interconnect@1100000 {
+			compatible = "qcom,sdx55-mc-virt";
+			reg = <0x01100000 0x400000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mem_noc: interconnect@9680000 {
+			compatible = "qcom,sdx55-mem-noc";
+			reg = <0x09680000 0x40000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@162c000 {
+			compatible = "qcom,sdx55-system-noc";
+			reg = <0x0162c000 0x31200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		qpic_bam: dma-controller@1b04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x01b04000 0x1c000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
+		qpic_nand: nand-controller@1b30000 {
+			compatible = "qcom,sdx55-nand";
+			reg = <0x01b30000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>,
+				 <&nand_clk_dummy>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+		};
+
+		pcie_rc: pcie@1c00000 {
+			compatible = "qcom,pcie-sdx55";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xc8>,
+			      <0x40001000 0x1000>,
+			      <0x40100000 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x40300000 0x0 0x3fd00000>;
+
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "msi8";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
+				 <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "sleep";
+
+			assigned-clocks = <&gcc GCC_PCIE_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommu-map = <0x0   &apps_smmu 0x0200 0x1>,
+				    <0x100 &apps_smmu 0x0201 0x1>,
+				    <0x200 &apps_smmu 0x0202 0x1>,
+				    <0x300 &apps_smmu 0x0203 0x1>,
+				    <0x400 &apps_smmu 0x0204 0x1>;
+
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_GDSC>;
+
+			phys = <&pcie_lane>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie_ep: pcie-ep@1c00000 {
+			compatible = "qcom,sdx55-pcie-ep";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xc8>,
+			      <0x40001000 0x1000>,
+			      <0x40200000 0x100000>,
+			      <0x01c03000 0x3000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "addr_space",
+				    "mmio";
+
+			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+			clocks = <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "sleep",
+				      "ref";
+
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global",
+					  "doorbell";
+
+			interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>;
+			interconnect-names = "pcie-mem";
+
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_GDSC>;
+			phys = <&pcie_lane>;
+			phy-names = "pciephy";
+			max-link-speed = <3>;
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
+		pcie_phy: phy@1c07000 {
+			compatible = "qcom,sdx55-qmp-pcie-phy";
+			reg = <0x01c07000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen";
+
+			resets = <&gcc GCC_PCIE_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie_lane: lanes@1c06000 {
+				reg = <0x01c06000 0x104>, /* tx0 */
+				      <0x01c06200 0x328>, /* rx0 */
+				      <0x01c07200 0x1e8>, /* pcs */
+				      <0x01c06800 0x104>, /* tx1 */
+				      <0x01c06a00 0x328>, /* rx1 */
+				      <0x01c07600 0x800>; /* pcs_misc */
+				clocks = <&gcc GCC_PCIE_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+				clock-output-names = "pcie_pipe_clk";
+			};
+		};
+
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sdx55-ipa";
+
+			iommus = <&apps_smmu 0x5e0 0x0>,
+				 <&apps_smmu 0x5e2 0x0>;
+			reg = <0x1e40000 0x7000>,
+			      <0x1e50000 0x4b20>,
+			      <0x1e04000 0x2c000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>,
+					<&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>,
+					<&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>;
+			interconnect-names = "memory",
+					     "imem",
+					     "config";
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01f40000 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sdx55-tcsr", "syscon";
+			reg = <0x01fc0000 0x1000>;
+		};
+
+		sdhc_1: mmc@8804000 {
+			compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x08804000 0x1000>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>;
+			clock-names = "iface", "core";
+			status = "disabled";
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sdx55-mpss-pas";
+			reg = <0x04080000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SDX55_CX>,
+					<&rpmhpd SDX55_MSS>;
+			power-domain-names = "cx", "mss";
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs 15>;
+			};
+		};
+
+		usb: usb@a6f8800 {
+			compatible = "qcom,sdx55-dwc3", "qcom,dwc3";
+			reg = <0x0a6f8800 0x400>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_GDSC>;
+
+			resets = <&gcc GCC_USB30_BCR>;
+
+			usb_dwc3: dwc3@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0a600000 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x1a0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		pdc: interrupt-controller@b210000 {
+			compatible = "qcom,sdx55-pdc", "qcom,pdc";
+			reg = <0x0b210000 0x30000>;
+			qcom,pdc-ranges = <0 179 52>;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		restart@c264000 {
+			compatible = "qcom,pshold";
+			reg = <0x0c264000 0x1000>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0c440000 0x0000d00>,
+			      <0x0c600000 0x2000000>,
+			      <0x0e600000 0x0100000>,
+			      <0x0e700000 0x00a0000>,
+			      <0x0c40a000 0x0000700>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sdx55-pinctrl";
+			reg = <0xf100000 0x300000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 108>;
+		};
+
+		sram@1468f000 {
+			compatible = "qcom,sdx55-imem", "syscon", "simple-mfd";
+			reg = <0x1468f000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0x0 0x1468f000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0x200>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x15000000 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17800000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <3>;
+			reg = <0x17800000 0x1000>,
+			      <0x17802000 0x1000>;
+		};
+
+		a7pll: clock@17808000 {
+			compatible = "qcom,sdx55-a7pll";
+			reg = <0x17808000 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <0>;
+		};
+
+		apcs: mailbox@17810000 {
+			compatible = "qcom,sdx55-apcs-gcc", "syscon";
+			reg = <0x17810000 0x2000>;
+			#mbox-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
+			clock-names = "ref", "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		watchdog@17817000 {
+			compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt";
+			reg = <0x17817000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@17820000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17820000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17821000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 7 0x4>,
+					     <GIC_SPI 6 0x4>;
+				reg = <0x17821000 0x1000>,
+				      <0x17822000 0x1000>;
+			};
+
+			frame@17823000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 8 0x4>;
+				reg = <0x17823000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17824000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 9 0x4>;
+				reg = <0x17824000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17825000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 10 0x4>;
+				reg = <0x17825000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17826000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 11 0x4>;
+				reg = <0x17826000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17827000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 12 0x4>;
+				reg = <0x17827000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17828000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 13 0x4>;
+				reg = <0x17828000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17829000 {
+				frame-number = <7>;
+				interrupts = <GIC_SPI 14 0x4>;
+				reg = <0x17829000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17830000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x17830000 0x10000>, <0x17840000 0x10000>;
+			reg-names = "drv-0", "drv-1";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <1>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   2>,
+					  <WAKE_TCS    2>, <CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdx55-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sdx55-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
new file mode 100644
index 0000000000000..02d8d6e241ae1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "qcom-sdx65.dtsi"
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <arm64/qcom/pmk8350.dtsi>
+#include <arm64/qcom/pm8150b.dtsi>
+#include "qcom-pmx65.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SDX65 MTP";
+	compatible = "qcom,sdx65-mtp", "qcom,sdx65";
+	qcom,board-id = <0x2010008 0x302>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mpss_dsm: memory@8c400000 {
+			no-map;
+			reg = <0x8c400000 0x3200000>;
+		};
+
+		ipa_fw_mem: memory@8fced000 {
+			no-map;
+			reg = <0x8fced000 0x10000>;
+		};
+
+		mpss_adsp_mem: memory@90800000 {
+			no-map;
+			reg = <0x90800000 0x10000000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_bob_3p3: pmx65_bob {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmx65-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-supply = <&vreg_s2b_1p224>;
+		vdd-l2-l18-supply = <&vreg_s2b_1p224>;
+		vdd-l3-supply = <&vreg_s8b_0p824>;
+		vdd-l4-supply = <&vreg_s7b_0p936>;
+		vdd-l5-l6-l16-supply = <&vreg_s4b_1p824>;
+		vdd-l7-supply = <&vreg_s3b_0p776>;
+		vdd-l8-l9-supply = <&vreg_s8b_0p824>;
+		vdd-l10-supply = <&vreg_bob_3p3>;
+		vdd-l11-l13-supply = <&vreg_bob_3p3>;
+		vdd-l12-supply = <&vreg_s2b_1p224>;
+		vdd-l14-supply = <&vreg_s3b_0p776>;
+		vdd-l15-supply = <&vreg_s2b_1p224>;
+		vdd-l17-supply = <&vreg_s8b_0p824>;
+		vdd-l19-supply = <&vreg_s3b_0p776>;
+		vdd-l20-supply = <&vreg_s7b_0p936>;
+		vdd-l21-supply = <&vreg_s7b_0p936>;
+
+		vreg_s2b_1p224: smps2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_s3b_0p776: smps3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		vreg_s4b_1p824: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		vreg_s7b_0p936: smps7 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		vreg_s8b_0p824: smps8 {
+			regulator-min-microvolt = <304000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		vreg_l1b_1p2: ldo1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo2 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo3 {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p88: ldo4 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_1p8: ldo5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo7 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo8 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo9 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_3p08: ldo10 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo13 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo14 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo15 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo16 {
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo17 {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo19 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo20 {
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo21 {
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "skip";
+	status = "okay";
+};
+
+&pcie_ep {
+	pinctrl-0 = <&pcie_ep_clkreq_default
+		     &pcie_ep_perst_default
+		     &pcie_ep_wake_default>;
+	pinctrl-names = "default";
+
+	reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l1b_1p2>;
+	vdda-pll-supply = <&vreg_l4b_0p88>;
+
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* ico and efs2 partitions are secured */
+		secure-regions = /bits/ 64 <0x500000 0x500000
+					    0xa00000 0xb00000>;
+	};
+};
+
+&remoteproc_mpss {
+	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
+};
+
+&tlmm {
+	pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
+		pins = "gpio56";
+		function = "pcie_clkreq";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie_ep_perst_default: pcie-ep-perst-default-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	pcie_ep_wake_default: pcie-ep-wake-default-state {
+		pins = "gpio53";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdda-pll-supply = <&vreg_l4b_0p88>;
+	vdda33-supply = <&vreg_l10b_3p08>;
+	vdda18-supply = <&vreg_l5b_1p8>;
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4b_0p88>;
+	vdda-pll-supply = <&vreg_l1b_1p2>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
new file mode 100644
index 0000000000000..1a3583029a649
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -0,0 +1,811 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX65 SoC device tree source
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdx65.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/interconnect/qcom,sdx65.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>;
+	interrupt-parent = <&intc>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			clock-output-names = "xo_board";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+			#clock-cells = <0>;
+		};
+
+		nand_clk_dummy: nand-clk-dummy {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			power-domains = <&rpmhpd SDX65_CX_AO>;
+			power-domain-names = "rpmhpd";
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdx65", "qcom,scm";
+		};
+	};
+
+	mc_virt: interconnect-mc-virt {
+		compatible = "qcom,sdx65-mc-virt";
+		#interconnect-cells = <1>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			required-opps = <&rpmhpd_opp_turbo>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		tz_heap_mem: memory@8fcad000 {
+			no-map;
+			reg = <0x8fcad000 0x40000>;
+		};
+
+		secdata_mem: memory@8fcfd000 {
+			no-map;
+			reg = <0x8fcfd000 0x1000>;
+		};
+
+		hyp_mem: memory@8fd00000 {
+			no-map;
+			reg = <0x8fd00000 0x80000>;
+		};
+
+		access_control_mem: memory@8fd80000 {
+			no-map;
+			reg = <0x8fd80000 0x80000>;
+		};
+
+		aop_mem: memory@8fe00000 {
+			no-map;
+			reg = <0x8fe00000 0x20000>;
+		};
+
+		smem_mem: memory@8fe20000 {
+			compatible = "qcom,smem";
+			reg = <0x8fe20000 0xc0000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		cmd_db: reserved-memory@8fee0000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x8fee0000 0x20000>;
+			no-map;
+		};
+
+		tz_mem: memory@8ff00000 {
+			no-map;
+			reg = <0x8ff00000 0x100000>;
+		};
+
+		tz_apps_mem: memory@90000000 {
+			no-map;
+			reg = <0x90000000 0x500000>;
+		};
+
+		llcc_tcm_mem: memory@15800000 {
+			no-map;
+			reg = <0x15800000 0x800000>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdx65";
+			reg = <0x00100000 0x001f7400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		blsp1_uart3: serial@831000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x00831000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		usb_hsphy: phy@ff4000 {
+			compatible = "qcom,sdx65-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0xff4000 0x120>;
+			#phy-cells = <0>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@ff6000 {
+			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
+			reg = <0x00ff6000 0x1c8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_EN>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
+				 <&gcc GCC_USB3_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			status = "disabled";
+
+			usb_ssphy: phy@ff6200 {
+				reg = <0x00ff6e00 0x160>,
+				      <0x00ff7000 0x1ec>,
+				      <0x00ff6200 0x1e00>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sdx65-system-noc";
+			reg = <0x01620000 0x31200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		qpic_bam: dma-controller@1b04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x01b04000 0x1c000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
+		qpic_nand: nand-controller@1b30000 {
+			compatible = "qcom,sdx55-nand";
+			reg = <0x01b30000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>,
+				 <&nand_clk_dummy>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+		};
+
+		pcie_ep: pcie-ep@1c00000 {
+			compatible = "qcom,sdx65-pcie-ep", "qcom,sdx55-pcie-ep";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xa8>,
+			      <0x40001000 0x1000>,
+			      <0x40200000 0x100000>,
+			      <0x01c03000 0x3000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "addr_space",
+				    "mmio";
+
+			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+			clocks = <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_EN>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "sleep",
+				      "ref";
+
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global", "doorbell";
+
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "core";
+
+			power-domains = <&gcc PCIE_GDSC>;
+
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+
+			max-link-speed = <3>;
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
+		pcie_phy: phy@1c06000 {
+			compatible = "qcom,sdx65-qmp-gen4x2-pcie-phy";
+			reg = <0x01c06000 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>,
+				 <&gcc GCC_PCIE_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01f40000 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fcb000 {
+			compatible = "qcom,sdx65-tcsr", "syscon";
+			reg = <0x01fc0000 0x1000>;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sdx65-ipa";
+
+			reg = <0x03f40000 0x10000>,
+			      <0x03f50000 0x5000>,
+			      <0x03e04000 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			iommus = <&apps_smmu 0x5e0 0x0>,
+				 <&apps_smmu 0x5e2 0x0>;
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
+					<&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_IPA_CFG>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sdx55-mpss-pas";
+			reg = <0x04080000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SDX65_CX>,
+					<&rpmhpd SDX65_MSS>;
+			power-domain-names = "cx", "mss";
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs 15>;
+			};
+		};
+
+		sdhc_1: mmc@8804000 {
+			compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x08804000 0x1000>;
+			reg-names = "hc";
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		mem_noc: interconnect@9680000 {
+			compatible = "qcom,sdx65-mem-noc";
+			reg = <0x09680000 0x27200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb: usb@a6f8800 {
+			compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
+			reg = <0x0a6f8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+					"sleep";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 18 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 19 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_GDSC>;
+
+			resets = <&gcc GCC_USB30_BCR>;
+
+			status = "disabled";
+
+			usb_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0a600000 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x1a0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		restart@c264000 {
+			compatible = "qcom,pshold";
+			reg = <0x0c264000 0x1000>;
+		};
+
+		spmi_bus: qcom,spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0xc440000 0xd00>,
+				<0xc600000 0x2000000>,
+				<0xe600000 0x100000>,
+				<0xe700000 0xa0000>,
+				<0xc40a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sdx65-tlmm";
+			reg = <0xf100000 0x300000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 109>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <2>;
+		};
+
+		pdc: interrupt-controller@b210000 {
+			compatible = "qcom,sdx65-pdc", "qcom,pdc";
+			reg = <0xb210000 0x10000>;
+			qcom,pdc-ranges = <0 147 52>, <52 266 32>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		sram@1468f000 {
+			compatible = "qcom,sdx65-imem", "syscon", "simple-mfd";
+			reg = <0x1468f000 0x1000>;
+			ranges = <0x0 0x1468f000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x15000000 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17800000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <3>;
+			reg = <0x17800000 0x1000>,
+			      <0x17802000 0x1000>;
+		};
+
+		a7pll: clock@17808000 {
+			compatible = "qcom,sdx55-a7pll";
+			reg = <0x17808000 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <0>;
+		};
+
+		apcs: mailbox@17810000 {
+			compatible = "qcom,sdx55-apcs-gcc", "syscon";
+			reg = <0x17810000 0x2000>;
+			#mbox-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
+			clock-names = "ref", "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		watchdog@17817000 {
+			compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt";
+			reg = <0x17817000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@17820000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17820000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17821000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 7 0x4>,
+					     <GIC_SPI 6 0x4>;
+				reg = <0x17821000 0x1000>,
+				      <0x17822000 0x1000>;
+			};
+
+			frame@17823000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 8 0x4>;
+				reg = <0x17823000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17824000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 9 0x4>;
+				reg = <0x17824000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17825000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 10 0x4>;
+				reg = <0x17825000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17826000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 11 0x4>;
+				reg = <0x17826000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17827000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 12 0x4>;
+				reg = <0x17827000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17828000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 13 0x4>;
+				reg = <0x17828000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17829000 {
+				frame-number = <7>;
+				interrupts = <GIC_SPI 14 0x4>;
+				reg = <0x17829000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17830000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x17830000 0x10000>,
+			    <0x17840000 0x10000>;
+			reg-names = "drv-0", "drv-1";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <1>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+				<SLEEP_TCS   2>,
+				<WAKE_TCS    2>,
+				<CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdx65-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sdx65-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			<1 12 0xf08>,
+			<1 10 0xf08>,
+			<1 11 0xf08>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
deleted file mode 100644
index 1e8447176b105..0000000000000
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Genmai board
- *
- * Copyright (C) 2013-14 Renesas Solutions Corp.
- * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
- */
-
-/dts-v1/;
-#include "r7s72100.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
-
-/ {
-	model = "Genmai";
-	compatible = "renesas,genmai", "renesas,r7s72100";
-
-	aliases {
-		serial0 = &scif2;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@8000000 {
-		device_type = "memory";
-		reg = <0x08000000 0x08000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	leds {
-		status = "okay";
-		compatible = "gpio-leds";
-
-		led1 {
-			gpios = <&port4 10 GPIO_ACTIVE_LOW>;
-		};
-
-		led2 {
-			gpios = <&port4 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pinctrl {
-
-	scif2_pins: serial2 {
-		/* P3_0 as TxD2; P3_2 as RxD2 */
-		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
-	};
-
-	i2c2_pins: i2c2 {
-		/* RIIC2: P1_4 as SCL, P1_5 as SDA */
-		pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
-	};
-
-	ether_pins: ether {
-		/* Ethernet on Ports 1,2,3,5 */
-		pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL  */
-			 <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC   */
-			 <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
-			 <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
-			 <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER  */
-			 <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV  */
-			 <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */
-			 <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER  */
-			 <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN  */
-			 <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS   */
-			 <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0  */
-			 <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1  */
-			 <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2  */
-			 <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3  */
-			 <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0  */
-			 <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1  */
-			 <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */
-			 <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */
-	};
-};
-
-&extal_clk {
-	clock-frequency = <13330000>;
-};
-
-&usb_x1_clk {
-	clock-frequency = <48000000>;
-};
-
-&rtc_x1_clk {
-	clock-frequency = <32768>;
-};
-
-&mtu2 {
-	status = "okay";
-};
-
-&ether {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ether_pins>;
-
-	status = "okay";
-
-	renesas,no-ether-link;
-	phy-handle = <&phy0>;
-	phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-idb824.2814",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	eeprom@50 {
-		compatible = "renesas,r1ex24128", "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <64>;
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&scif2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&scif2_pins>;
-
-	status = "okay";
-};
-
-&spi4 {
-	status = "okay";
-
-	codec: codec@0 {
-		compatible = "wlf,wm8978";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
deleted file mode 100644
index 105f9c71f9fd5..0000000000000
--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the GR-Peach board
- *
- * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
- * Copyright (C) 2016 Renesas Electronics
- */
-
-/dts-v1/;
-#include "r7s72100.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
-
-/ {
-	model = "GR-Peach";
-	compatible = "renesas,gr-peach", "renesas,r7s72100";
-
-	aliases {
-		serial0 = &scif2;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/mtdblock0";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x00a00000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	flash@18000000 {
-		compatible = "mtd-rom";
-		probe-type = "map_rom";
-		reg = <0x18000000 0x00800000>;
-		bank-width = <4>;
-		device-width = <1>;
-
-		clocks = <&mstp9_clks R7S72100_CLK_SPIBSC0>;
-		power-domains = <&cpg_clocks>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		rootfs@600000 {
-			label = "rootfs";
-			reg = <0x00600000 0x00200000>;
-		};
-	};
-
-	leds {
-		status = "okay";
-		compatible = "gpio-leds";
-
-		led1 {
-			gpios = <&port6 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pinctrl {
-	scif2_pins: serial2 {
-		/* P6_2 as RxD2; P6_3 as TxD2 */
-		pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>;
-	};
-
-	ether_pins: ether {
-		/* Ethernet on Ports 1,3,5,10 */
-		pinmux = <RZA1_PINMUX(1, 14, 4)>, /* P1_14 = ET_COL   */
-			 <RZA1_PINMUX(3, 0, 2)>,  /* P3_0 = ET_TXCLK  */
-			 <RZA1_PINMUX(3, 3, 2)>,  /* P3_3 = ET_MDIO   */
-			 <RZA1_PINMUX(3, 4, 2)>,  /* P3_4 = ET_RXCLK  */
-			 <RZA1_PINMUX(3, 5, 2)>,  /* P3_5 = ET_RXER   */
-			 <RZA1_PINMUX(3, 6, 2)>,  /* P3_6 = ET_RXDV   */
-			 <RZA1_PINMUX(5, 9, 2)>,  /* P5_9 = ET_MDC    */
-			 <RZA1_PINMUX(10, 1, 4)>, /* P10_1 = ET_TXER  */
-			 <RZA1_PINMUX(10, 2, 4)>, /* P10_2 = ET_TXEN  */
-			 <RZA1_PINMUX(10, 3, 4)>, /* P10_3 = ET_CRS   */
-			 <RZA1_PINMUX(10, 4, 4)>, /* P10_4 = ET_TXD0  */
-			 <RZA1_PINMUX(10, 5, 4)>, /* P10_5 = ET_TXD1  */
-			 <RZA1_PINMUX(10, 6, 4)>, /* P10_6 = ET_TXD2  */
-			 <RZA1_PINMUX(10, 7, 4)>, /* P10_7 = ET_TXD3  */
-			 <RZA1_PINMUX(10, 8, 4)>, /* P10_8 = ET_RXD0  */
-			 <RZA1_PINMUX(10, 9, 4)>, /* P10_9 = ET_RXD1  */
-			 <RZA1_PINMUX(10, 10, 4)>,/* P10_10 = ET_RXD2 */
-			 <RZA1_PINMUX(10, 11, 4)>;/* P10_11 = ET_RXD3 */
-	};
-};
-
-&extal_clk {
-	clock-frequency = <13333000>;
-};
-
-&usb_x1_clk {
-	clock-frequency = <48000000>;
-};
-
-&mtu2 {
-	status = "okay";
-};
-
-&ostm0 {
-	status = "okay";
-};
-
-&ostm1 {
-	status = "okay";
-};
-
-&scif2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&scif2_pins>;
-
-	status = "okay";
-};
-
-&ether {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ether_pins>;
-
-	status = "okay";
-
-	renesas,no-ether-link;
-	phy-handle = <&phy0>;
-
-	phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-id0007.c0f0",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-
-		reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
-		reset-delay-us = <5>;
-	};
-};
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
deleted file mode 100644
index 1c5acf6944074..0000000000000
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ /dev/null
@@ -1,224 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the RZ/A1H RSK board
- *
- * Copyright (C) 2016 Renesas Electronics
- */
-
-/dts-v1/;
-#include "r7s72100.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
-
-/ {
-	model = "RSKRZA1";
-	compatible = "renesas,rskrza1", "renesas,r7s72100";
-
-	aliases {
-		serial0 = &scif2;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@8000000 {
-		device_type = "memory";
-		reg = <0x08000000 0x02000000>;
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&keyboard_pins>;
-
-		key-1 {
-			interrupt-parent = <&irqc>;
-			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
-			linux,code = <KEY_1>;
-			label = "SW1";
-			wakeup-source;
-		};
-
-		key-2 {
-			interrupt-parent = <&irqc>;
-			interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
-			linux,code = <KEY_2>;
-			label = "SW2";
-			wakeup-source;
-		};
-
-		key-3 {
-			interrupt-parent = <&irqc>;
-			interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
-			linux,code = <KEY_3>;
-			label = "SW3";
-			wakeup-source;
-		};
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 {
-			gpios = <&port7 1 GPIO_ACTIVE_LOW>;
-		};
-
-		led1 {
-			gpios = <&io_expander1 0 GPIO_ACTIVE_LOW>;
-		};
-
-		led2 {
-			gpios = <&io_expander1 1 GPIO_ACTIVE_LOW>;
-		};
-
-		led3 {
-			gpios = <&io_expander1 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&extal_clk {
-	clock-frequency = <13330000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	io_expander1: gpio@20 {
-		compatible = "onnn,cat9554";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	io_expander2: gpio@21 {
-		compatible = "onnn,cat9554";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	eeprom@50 {
-		compatible = "renesas,r1ex24016", "atmel,24c16";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-&usb_x1_clk {
-	clock-frequency = <48000000>;
-};
-
-&rtc_x1_clk {
-	clock-frequency = <32768>;
-};
-
-&pinctrl {
-	/* RIIC ch3 (Port Expander, EEPROM (MAC Addr), Audio Codec) */
-	i2c3_pins: i2c3 {
-		pinmux = <RZA1_PINMUX(1, 6, 1)>,	/* RIIC3SCL */
-			 <RZA1_PINMUX(1, 7, 1)>;	/* RIIC3SDA */
-	};
-
-	keyboard_pins: keyboard {
-		pinmux = <RZA1_PINMUX(1, 9, 3)>,	/* IRQ3 */
-			 <RZA1_PINMUX(1, 8, 3)>,	/* IRQ2 */
-			 <RZA1_PINMUX(1, 11, 3)>;	/* IRQ5 */
-	};
-
-	/* Serial Console */
-	scif2_pins: serial2 {
-		pinmux = <RZA1_PINMUX(3, 0, 6)>,	/* TxD2 */
-			 <RZA1_PINMUX(3, 2, 4)>;	/* RxD2 */
-	};
-
-	/* Ethernet */
-	ether_pins: ether {
-		/* Ethernet on Ports 1,2,3,5 */
-		pinmux = <RZA1_PINMUX(1, 14, 4)>,	/* ET_COL   */
-			 <RZA1_PINMUX(5, 9, 2)>,	/* ET_MDC   */
-			 <RZA1_PINMUX(3, 3, 2)>,	/* ET_MDIO  */
-			 <RZA1_PINMUX(3, 4, 2)>,	/* ET_RXCLK */
-			 <RZA1_PINMUX(3, 5, 2)>,	/* ET_RXER  */
-			 <RZA1_PINMUX(3, 6, 2)>,	/* ET_RXDV  */
-			 <RZA1_PINMUX(2, 0, 2)>,	/* ET_TXCLK */
-			 <RZA1_PINMUX(2, 1, 2)>,	/* ET_TXER  */
-			 <RZA1_PINMUX(2, 2, 2)>,	/* ET_TXEN  */
-			 <RZA1_PINMUX(2, 3, 2)>,	/* ET_CRS   */
-			 <RZA1_PINMUX(2, 4, 2)>,	/* ET_TXD0  */
-			 <RZA1_PINMUX(2, 5, 2)>,	/* ET_TXD1  */
-			 <RZA1_PINMUX(2, 6, 2)>,	/* ET_TXD2  */
-			 <RZA1_PINMUX(2, 7, 2)>,	/* ET_TXD3  */
-			 <RZA1_PINMUX(2, 8, 2)>,	/* ET_RXD0  */
-			 <RZA1_PINMUX(2, 9, 2)>,	/* ET_RXD1  */
-			 <RZA1_PINMUX(2, 10, 2)>,	/* ET_RXD2  */
-			 <RZA1_PINMUX(2, 11, 2)>;	/* ET_RXD3  */
-	};
-
-	/* SDHI ch1 on CN1 */
-	sdhi1_pins: sdhi1 {
-		pinmux = <RZA1_PINMUX(3, 8, 7)>,	/* SD_CD_1 */
-			 <RZA1_PINMUX(3, 9, 7)>,	/* SD_WP_1 */
-			 <RZA1_PINMUX(3, 10, 7)>,	/* SD_D1_1 */
-			 <RZA1_PINMUX(3, 11, 7)>,	/* SD_D0_1 */
-			 <RZA1_PINMUX(3, 12, 7)>,	/* SD_CLK_1 */
-			 <RZA1_PINMUX(3, 13, 7)>,	/* SD_CMD_1 */
-			 <RZA1_PINMUX(3, 14, 7)>,	/* SD_D3_1 */
-			 <RZA1_PINMUX(3, 15, 7)>;	/* SD_D2_1 */
-	};
-};
-
-&mtu2 {
-	status = "okay";
-};
-
-&ether {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ether_pins>;
-	status = "okay";
-	renesas,no-ether-link;
-	phy-handle = <&phy0>;
-	phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-idb824.2814",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&sdhi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhi1_pins>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&ostm0 {
-	status = "okay";
-};
-
-&ostm1 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&scif2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&scif2_pins>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
deleted file mode 100644
index b07b71307f24a..0000000000000
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ /dev/null
@@ -1,733 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the r7s72100 SoC
- *
- * Copyright (C) 2013-14 Renesas Solutions Corp.
- * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
- */
-
-#include <dt-bindings/clock/r7s72100-clock.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r7s72100";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		spi2 = &spi2;
-		spi3 = &spi3;
-		spi4 = &spi4;
-	};
-
-	/* Fixed factor clocks */
-	b_clk: b {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&cpg_clocks R7S72100_CLK_PLL>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			clock-frequency = <400000000>;
-			clocks = <&cpg_clocks R7S72100_CLK_I>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	/* External clocks */
-	extal_clk: extal {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		/* If clk present, value must be set by board */
-		clock-frequency = <0>;
-	};
-
-	p0_clk: p0 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&cpg_clocks R7S72100_CLK_PLL>;
-		clock-mult = <1>;
-		clock-div = <12>;
-	};
-
-	p1_clk: p1 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&cpg_clocks R7S72100_CLK_PLL>;
-		clock-mult = <1>;
-		clock-div = <6>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts-extended = <&gic GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	rtc_x1_clk: rtc_x1 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		/* If clk present, value must be set by board to 32678 */
-		clock-frequency = <0>;
-	};
-
-	rtc_x3_clk: rtc_x3 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		/* If clk present, value must be set by board to 4000000 */
-		clock-frequency = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		L2: cache-controller@3ffff000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x3ffff000 0x1000>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			arm,early-bresp-disable;
-			arm,full-line-zero-disable;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		scif0: serial@e8007000 {
-			compatible = "renesas,scif-r7s72100", "renesas,scif";
-			reg = <0xe8007000 64>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
-			clock-names = "fck";
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		scif1: serial@e8007800 {
-			compatible = "renesas,scif-r7s72100", "renesas,scif";
-			reg = <0xe8007800 64>;
-			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
-			clock-names = "fck";
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		scif2: serial@e8008000 {
-			compatible = "renesas,scif-r7s72100", "renesas,scif";
-			reg = <0xe8008000 64>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
-			clock-names = "fck";
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		scif3: serial@e8008800 {
-			compatible = "renesas,scif-r7s72100", "renesas,scif";
-			reg = <0xe8008800 64>;
-			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
-			clock-names = "fck";
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		scif4: serial@e8009000 {
-			compatible = "renesas,scif-r7s72100", "renesas,scif";
-			reg = <0xe8009000 64>;
-			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
-			clock-names = "fck";
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		scif5: serial@e8009800 {
-			compatible = "renesas,scif-r7s72100", "renesas,scif";
-			reg = <0xe8009800 64>;
-			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
-			clock-names = "fck";
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		scif6: serial@e800a000 {
-			compatible = "renesas,scif-r7s72100", "renesas,scif";
-			reg = <0xe800a000 64>;
-			interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
-			clock-names = "fck";
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		scif7: serial@e800a800 {
-			compatible = "renesas,scif-r7s72100", "renesas,scif";
-			reg = <0xe800a800 64>;
-			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
-			clock-names = "fck";
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		spi0: spi@e800c800 {
-			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-			reg = <0xe800c800 0x24>;
-			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error", "rx", "tx";
-			clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
-			power-domains = <&cpg_clocks>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi1: spi@e800d000 {
-			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-			reg = <0xe800d000 0x24>;
-			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error", "rx", "tx";
-			clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
-			power-domains = <&cpg_clocks>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi2: spi@e800d800 {
-			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-			reg = <0xe800d800 0x24>;
-			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error", "rx", "tx";
-			clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
-			power-domains = <&cpg_clocks>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi3: spi@e800e000 {
-			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-			reg = <0xe800e000 0x24>;
-			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error", "rx", "tx";
-			clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
-			power-domains = <&cpg_clocks>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi4: spi@e800e800 {
-			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-			reg = <0xe800e800 0x24>;
-			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error", "rx", "tx";
-			clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
-			power-domains = <&cpg_clocks>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usbhs0: usb@e8010000 {
-			compatible = "renesas,usbhs-r7s72100", "renesas,rza1-usbhs";
-			reg = <0xe8010000 0x1a0>;
-			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mstp7_clks R7S72100_CLK_USB0>;
-			renesas,buswait = <4>;
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		usbhs1: usb@e8207000 {
-			compatible = "renesas,usbhs-r7s72100", "renesas,rza1-usbhs";
-			reg = <0xe8207000 0x1a0>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mstp7_clks R7S72100_CLK_USB1>;
-			renesas,buswait = <4>;
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		mmcif: mmc@e804c800 {
-			compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif";
-			reg = <0xe804c800 0x80>;
-			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mstp8_clks R7S72100_CLK_MMCIF>;
-			power-domains = <&cpg_clocks>;
-			reg-io-width = <4>;
-			bus-width = <8>;
-			status = "disabled";
-		};
-
-		sdhi0: mmc@e804e000 {
-			compatible = "renesas,sdhi-r7s72100";
-			reg = <0xe804e000 0x100>;
-			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&mstp12_clks R7S72100_CLK_SDHI00>,
-				 <&mstp12_clks R7S72100_CLK_SDHI01>;
-			clock-names = "core", "cd";
-			power-domains = <&cpg_clocks>;
-			cap-sd-highspeed;
-			cap-sdio-irq;
-			status = "disabled";
-		};
-
-		sdhi1: mmc@e804e800 {
-			compatible = "renesas,sdhi-r7s72100";
-			reg = <0xe804e800 0x100>;
-			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&mstp12_clks R7S72100_CLK_SDHI10>,
-				 <&mstp12_clks R7S72100_CLK_SDHI11>;
-			clock-names = "core", "cd";
-			power-domains = <&cpg_clocks>;
-			cap-sd-highspeed;
-			cap-sdio-irq;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@e8201000 {
-			compatible = "arm,pl390";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0xe8201000 0x1000>,
-				<0xe8202000 0x1000>;
-		};
-
-		ether: ethernet@e8203000 {
-			compatible = "renesas,ether-r7s72100";
-			reg = <0xe8203000 0x800>,
-			      <0xe8204800 0x200>;
-			interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mstp7_clks R7S72100_CLK_ETHER>;
-			power-domains = <&cpg_clocks>;
-			phy-mode = "mii";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		ceu: camera@e8210000 {
-			reg = <0xe8210000 0x3000>;
-			compatible = "renesas,r7s72100-ceu";
-			interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mstp6_clks R7S72100_CLK_CEU>;
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		wdt: watchdog@fcfe0000 {
-			compatible = "renesas,r7s72100-wdt", "renesas,rza-wdt";
-			reg = <0xfcfe0000 0x6>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&p0_clk>;
-		};
-
-		/* Special CPG clocks */
-		cpg_clocks: cpg_clocks@fcfe0000 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-cpg-clocks",
-				     "renesas,rz-cpg-clocks";
-			reg = <0xfcfe0000 0x18>;
-			clocks = <&extal_clk>, <&usb_x1_clk>;
-			clock-output-names = "pll", "i", "g";
-			#power-domain-cells = <0>;
-		};
-
-		/* MSTP clocks */
-		mstp3_clks: mstp3_clks@fcfe0420 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe0420 4>;
-			clocks = <&p0_clk>;
-			clock-indices = <R7S72100_CLK_MTU2>;
-			clock-output-names = "mtu2";
-		};
-
-		mstp4_clks: mstp4_clks@fcfe0424 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe0424 4>;
-			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
-				 <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
-			clock-indices = <
-				R7S72100_CLK_SCIF0 R7S72100_CLK_SCIF1 R7S72100_CLK_SCIF2 R7S72100_CLK_SCIF3
-				R7S72100_CLK_SCIF4 R7S72100_CLK_SCIF5 R7S72100_CLK_SCIF6 R7S72100_CLK_SCIF7
-			>;
-			clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
-		};
-
-		mstp5_clks: mstp5_clks@fcfe0428 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe0428 4>;
-			clocks = <&p0_clk>, <&p0_clk>;
-			clock-indices = <R7S72100_CLK_OSTM0 R7S72100_CLK_OSTM1>;
-			clock-output-names = "ostm0", "ostm1";
-		};
-
-		mstp6_clks: mstp6_clks@fcfe042c {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe042c 4>;
-			clocks = <&b_clk>, <&p0_clk>;
-			clock-indices = <R7S72100_CLK_CEU R7S72100_CLK_RTC>;
-			clock-output-names = "ceu", "rtc";
-		};
-
-		mstp7_clks: mstp7_clks@fcfe0430 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe0430 4>;
-			clocks = <&b_clk>, <&p1_clk>, <&p1_clk>;
-			clock-indices = <R7S72100_CLK_ETHER R7S72100_CLK_USB0 R7S72100_CLK_USB1>;
-			clock-output-names = "ether", "usb0", "usb1";
-		};
-
-		mstp8_clks: mstp8_clks@fcfe0434 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe0434 4>;
-			clocks = <&p1_clk>;
-			clock-indices = <R7S72100_CLK_MMCIF>;
-			clock-output-names = "mmcif";
-		};
-
-		mstp9_clks: mstp9_clks@fcfe0438 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe0438 4>;
-			clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>, <&b_clk>, <&b_clk>;
-			clock-indices = <
-				R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3
-				R7S72100_CLK_SPIBSC0 R7S72100_CLK_SPIBSC1
-			>;
-			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3", "spibsc0", "spibsc1";
-		};
-
-		mstp10_clks: mstp10_clks@fcfe043c {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe043c 4>;
-			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
-				 <&p1_clk>;
-			clock-indices = <
-				R7S72100_CLK_SPI0 R7S72100_CLK_SPI1 R7S72100_CLK_SPI2 R7S72100_CLK_SPI3
-				R7S72100_CLK_SPI4
-			>;
-			clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
-		};
-		mstp12_clks: mstp12_clks@fcfe0444 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe0444 4>;
-			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
-			clock-indices = <
-				R7S72100_CLK_SDHI00 R7S72100_CLK_SDHI01
-				R7S72100_CLK_SDHI10 R7S72100_CLK_SDHI11
-			>;
-			clock-output-names = "sdhi00", "sdhi01", "sdhi10", "sdhi11";
-		};
-
-		pinctrl: pinctrl@fcfe3000 {
-			compatible = "renesas,r7s72100-ports";
-
-			reg = <0xfcfe3000 0x4230>;
-
-			port0: gpio-0 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 0 6>;
-			};
-
-			port1: gpio-1 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
-
-			port2: gpio-2 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
-
-			port3: gpio-3 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
-
-			port4: gpio-4 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
-
-			port5: gpio-5 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 80 11>;
-			};
-
-			port6: gpio-6 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 96 16>;
-			};
-
-			port7: gpio-7 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 112 16>;
-			};
-
-			port8: gpio-8 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 128 16>;
-			};
-
-			port9: gpio-9 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 144 8>;
-			};
-
-			port10: gpio-10 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 160 16>;
-			};
-
-			port11: gpio-11 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 176 16>;
-			};
-		};
-
-		ostm0: timer@fcfec000 {
-			compatible = "renesas,r7s72100-ostm", "renesas,ostm";
-			reg = <0xfcfec000 0x30>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		ostm1: timer@fcfec400 {
-			compatible = "renesas,r7s72100-ostm", "renesas,ostm";
-			reg = <0xfcfec400 0x30>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&mstp5_clks R7S72100_CLK_OSTM1>;
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@fcfee000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-			reg = <0xfcfee000 0x44>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tei", "ri", "ti", "spi", "sti",
-					  "naki", "ali", "tmoi";
-			clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
-			clock-frequency = <100000>;
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@fcfee400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-			reg = <0xfcfee400 0x44>;
-			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tei", "ri", "ti", "spi", "sti",
-					  "naki", "ali", "tmoi";
-			clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
-			clock-frequency = <100000>;
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@fcfee800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-			reg = <0xfcfee800 0x44>;
-			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tei", "ri", "ti", "spi", "sti",
-					  "naki", "ali", "tmoi";
-			clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
-			clock-frequency = <100000>;
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@fcfeec00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-			reg = <0xfcfeec00 0x44>;
-			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tei", "ri", "ti", "spi", "sti",
-					  "naki", "ali", "tmoi";
-			clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
-			clock-frequency = <100000>;
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		irqc: interrupt-controller@fcfef800 {
-			compatible = "renesas,r7s72100-irqc",
-				     "renesas,rza1-irqc";
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0xfcfef800 0x6>;
-			interrupt-map =
-				<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-				<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-				<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-map-mask = <7 0>;
-		};
-
-		mtu2: timer@fcff0000 {
-			compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
-			reg = <0xfcff0000 0x400>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tgi0a";
-			clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
-			clock-names = "fck";
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-
-		rtc: rtc@fcff1000 {
-			compatible = "renesas,r7s72100-rtc", "renesas,sh-rtc";
-			reg = <0xfcff1000 0x2e>;
-			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "alarm", "period", "carry";
-			clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>,
-				 <&rtc_x3_clk>, <&extal_clk>;
-			clock-names = "fck", "rtc_x1", "rtc_x3", "extal";
-			power-domains = <&cpg_clocks>;
-			status = "disabled";
-		};
-	};
-
-	usb_x1_clk: usb_x1 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		/* If clk present, value must be set by board */
-		clock-frequency = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
deleted file mode 100644
index 69a5a44b8a2fd..0000000000000
--- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the RZA2MEVB board
- *
- * Copyright (C) 2018 Renesas Electronics
- *
- * As upstream Linux does not support XIP, it cannot run in 8 MiB of HyperRAM.
- * Hence the 64 MiB of SDRAM on the sub-board needs to be enabled, which has
- * the following ramifications:
- *   - SCIF4 connected to the on-board USB-serial can no longer be used as the
- *     serial console,
- *   - Instead, SCIF2 is used as the serial console, by connecting a 3.3V TTL
- *     USB-to-Serial adapter to the CMOS camera connector:
- *       - RXD = CN17-9,
- *       - TXD = CN17-10,
- *       - GND = CN17-2 or CN17-17,
- *   - The first Ethernet channel can no longer be used,
- *   - USB Channel 1 loses the overcurrent input signal.
- *
- * Please make sure your sub-board matches the following switch settings:
- *
- *           SW6                SW6-1 set to SDRAM
- *  ON                          SW6-2 set to Audio
- * +---------------------+      SW6-3 set to DRP
- * | =   =   = = =       |      SW6-4 set to CEU
- * |   =   =             |      SW6-5 set to Ether2
- * | 1 2 3 4 5 6 7 8 9 0 |      SW6-6 set to VDC6
- * +---------------------+      SW6-7 set to VDC6
- */
-
-/dts-v1/;
-#include "r7s9210.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
-
-/ {
-	model = "RZA2MEVB";
-	compatible = "renesas,rza2mevb", "renesas,r7s9210";
-
-	aliases {
-		serial0 = &scif2;
-		ethernet0 = &ether1;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel";
-		stdout-path = "serial0:115200n8";
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&keyboard_pins>;
-
-		key-3 {
-			interrupt-parent = <&irqc>;
-			interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
-			linux,code = <KEY_3>;
-			label = "SW3";
-			wakeup-source;
-		};
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-red {
-			gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
-		};
-		led-green {
-			gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	memory@c000000 {
-		device_type = "memory";
-		reg = <0x0c000000 0x04000000>;	/* SDRAM */
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&ether1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&eth1_pins>;
-	status = "okay";
-	renesas,no-ether-link;
-	phy-handle = <&phy1>;
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id001c.c816",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-/* EXTAL */
-&extal_clk {
-	clock-frequency = <24000000>;	/* 24MHz */
-};
-
-&i2c3 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	eeprom@50 {
-		compatible = "renesas,r1ex24128", "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <64>;
-	};
-};
-
-/* High resolution System tick timers */
-&ostm0 {
-	status = "okay";
-};
-
-&ostm1 {
-	status = "okay";
-};
-
-&pinctrl {
-	eth0_pins: eth0 {
-		pinmux = <RZA2_PINMUX(PORTE, 0, 7)>, /* REF50CK0 */
-			 <RZA2_PINMUX(PORT6, 1, 7)>, /* RMMI0_TXDEN */
-			 <RZA2_PINMUX(PORT6, 2, 7)>, /* RMII0_TXD0 */
-			 <RZA2_PINMUX(PORT6, 3, 7)>, /* RMII0_TXD1 */
-			 <RZA2_PINMUX(PORTE, 4, 7)>, /* RMII0_CRSDV */
-			 <RZA2_PINMUX(PORTE, 1, 7)>, /* RMII0_RXD0 */
-			 <RZA2_PINMUX(PORTE, 2, 7)>, /* RMII0_RXD1 */
-			 <RZA2_PINMUX(PORTE, 3, 7)>, /* RMII0_RXER */
-			 <RZA2_PINMUX(PORTE, 5, 1)>, /* ET0_MDC */
-			 <RZA2_PINMUX(PORTE, 6, 1)>, /* ET0_MDIO */
-			 <RZA2_PINMUX(PORTL, 0, 5)>; /* IRQ4 */
-	};
-
-	eth1_pins: eth1 {
-		pinmux = <RZA2_PINMUX(PORTK, 3, 7)>, /* REF50CK1 */
-			 <RZA2_PINMUX(PORTK, 0, 7)>, /* RMMI1_TXDEN */
-			 <RZA2_PINMUX(PORTK, 1, 7)>, /* RMII1_TXD0 */
-			 <RZA2_PINMUX(PORTK, 2, 7)>, /* RMII1_TXD1 */
-			 <RZA2_PINMUX(PORT3, 2, 7)>, /* RMII1_CRSDV */
-			 <RZA2_PINMUX(PORTK, 4, 7)>, /* RMII1_RXD0 */
-			 <RZA2_PINMUX(PORT3, 5, 7)>, /* RMII1_RXD1 */
-			 <RZA2_PINMUX(PORT3, 1, 7)>, /* RMII1_RXER */
-			 <RZA2_PINMUX(PORT3, 3, 1)>, /* ET1_MDC */
-			 <RZA2_PINMUX(PORT3, 4, 1)>, /* ET1_MDIO */
-			 <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */
-	};
-
-	i2c3_pins: i2c3 {
-		pinmux = <RZA2_PINMUX(PORTD, 6, 1)>,	/* RIIC3SCL */
-			 <RZA2_PINMUX(PORTD, 7, 1)>;	/* RIIC3SDA */
-	};
-
-	keyboard_pins: keyboard {
-		pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>;	/* IRQ0 */
-	};
-
-	/* Serial Console */
-	scif2_pins: serial2 {
-		pinmux = <RZA2_PINMUX(PORTE, 2, 3)>,	/* TxD2 */
-			 <RZA2_PINMUX(PORTE, 1, 3)>;	/* RxD2 */
-	};
-
-	sdhi0_pins: sdhi0 {
-		pinmux = <RZA2_PINMUX(PORT5, 0, 3)>,	/* SD0_CD */
-			 <RZA2_PINMUX(PORT5, 1, 3)>;	/* SD0_WP */
-	};
-
-	sdhi1_pins: sdhi1 {
-		pinmux = <RZA2_PINMUX(PORT5, 4, 3)>,	/* SD1_CD */
-			 <RZA2_PINMUX(PORT5, 5, 3)>;	/* SD1_WP */
-	};
-
-	usb0_pins: usb0 {
-		pinmux = <RZA2_PINMUX(PORT5, 2, 3)>,	/* VBUSIN0 */
-			 <RZA2_PINMUX(PORTC, 6, 1)>,	/* VBUSEN0 */
-			 <RZA2_PINMUX(PORTC, 7, 1)>;	/* OVRCUR0 */
-	};
-
-	usb1_pins: usb1 {
-		pinmux = <RZA2_PINMUX(PORTC, 0, 1)>,	/* VBUSIN1 */
-			 <RZA2_PINMUX(PORTC, 5, 1)>;	/* VBUSEN1 */
-	};
-};
-
-/* RTC_X1 */
-&rtc_x1_clk {
-	clock-frequency = <32768>;
-};
-
-/* Serial Console */
-&scif2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&scif2_pins>;
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhi0_pins>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&sdhi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhi1_pins>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-/* USB-0 as Host */
-&usb2_phy0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins>;
-	dr_mode = "host";	/* Requires JP3 to be fitted */
-	status = "okay";
-};
-
-/* USB-1 as Host */
-&usb2_phy1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-/* USB_X1 */
-&usb_x1_clk {
-	clock-frequency = <48000000>;
-};
diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
deleted file mode 100644
index fdeb0bc12cb79..0000000000000
--- a/arch/arm/boot/dts/r7s9210.dtsi
+++ /dev/null
@@ -1,509 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R7S9210 SoC
- *
- * Copyright (C) 2018 Renesas Electronics Corporation
- *
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/r7s9210-cpg-mssr.h>
-
-/ {
-	compatible = "renesas,r7s9210";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	/* External clocks */
-	extal_clk: extal {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		/* Value must be set by board */
-		clock-frequency = <0>;
-	};
-
-	rtc_x1_clk: rtc_x1 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		/* If clk present, value (32678) must be set by board */
-		clock-frequency = <0>;
-	};
-
-	usb_x1_clk: usb_x1 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		/* If clk present, value (48000000) must be set by board */
-		clock-frequency = <0>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			clock-frequency = <528000000>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		L2: cache-controller@1f003000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x1f003000 0x1000>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			arm,early-bresp-disable;
-			arm,full-line-zero-disable;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		scif0: serial@e8007000 {
-			compatible = "renesas,scif-r7s9210";
-			reg = <0xe8007000 0x18>;
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "eri", "rxi", "txi",
-					  "bri", "dri", "tei";
-			clocks = <&cpg CPG_MOD 47>;
-			clock-names = "fck";
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		scif1: serial@e8007800 {
-			compatible = "renesas,scif-r7s9210";
-			reg = <0xe8007800 0x18>;
-			interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "eri", "rxi", "txi",
-					  "bri", "dri", "tei";
-			clocks = <&cpg CPG_MOD 46>;
-			clock-names = "fck";
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		scif2: serial@e8008000 {
-			compatible = "renesas,scif-r7s9210";
-			reg = <0xe8008000 0x18>;
-			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "eri", "rxi", "txi",
-					  "bri", "dri", "tei";
-			clocks = <&cpg CPG_MOD 45>;
-			clock-names = "fck";
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		scif3: serial@e8008800 {
-			compatible = "renesas,scif-r7s9210";
-			reg = <0xe8008800 0x18>;
-			interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "eri", "rxi", "txi",
-					  "bri", "dri", "tei";
-			clocks = <&cpg CPG_MOD 44>;
-			clock-names = "fck";
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		scif4: serial@e8009000 {
-			compatible = "renesas,scif-r7s9210";
-			reg = <0xe8009000 0x18>;
-			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "eri", "rxi", "txi",
-					  "bri", "dri", "tei";
-			clocks = <&cpg CPG_MOD 43>;
-			clock-names = "fck";
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		spi0: spi@e800c800 {
-			compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz";
-			reg = <0xe800c800 0x24>;
-			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error", "rx", "tx";
-			clocks = <&cpg CPG_MOD 97>;
-			power-domains = <&cpg>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi1: spi@e800d000 {
-			compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz";
-			reg = <0xe800d000 0x24>;
-			interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error", "rx", "tx";
-			clocks = <&cpg CPG_MOD 96>;
-			power-domains = <&cpg>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi2: spi@e800d800 {
-			compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz";
-			reg = <0xe800d800 0x24>;
-			interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error", "rx", "tx";
-			clocks = <&cpg CPG_MOD 95>;
-			power-domains = <&cpg>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		ether0: ethernet@e8204000 {
-			compatible = "renesas,ether-r7s9210";
-			reg = <0xe8204000 0x200>;
-			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 65>;
-			power-domains = <&cpg>;
-
-			phy-mode = "rmii";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		ether1: ethernet@e8204200 {
-			compatible = "renesas,ether-r7s9210";
-			reg = <0xe8204200 0x200>;
-			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 64>;
-			power-domains = <&cpg>;
-			phy-mode = "rmii";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@e803a000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,riic-r7s9210", "renesas,riic-rz";
-			reg = <0xe803a000 0x44>;
-			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tei", "ri", "ti", "spi", "sti",
-					  "naki", "ali", "tmoi";
-			clocks = <&cpg CPG_MOD 87>;
-			power-domains = <&cpg>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@e803a400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,riic-r7s9210", "renesas,riic-rz";
-			reg = <0xe803a400 0x44>;
-			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tei", "ri", "ti", "spi", "sti",
-					  "naki", "ali", "tmoi";
-			clocks = <&cpg CPG_MOD 86>;
-			power-domains = <&cpg>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@e803a800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,riic-r7s9210", "renesas,riic-rz";
-			reg = <0xe803a800 0x44>;
-			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tei", "ri", "ti", "spi", "sti",
-					  "naki", "ali", "tmoi";
-			clocks = <&cpg CPG_MOD 85>;
-			power-domains = <&cpg>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@e803ac00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,riic-r7s9210", "renesas,riic-rz";
-			reg = <0xe803ac00 0x44>;
-			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 257 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 258 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tei", "ri", "ti", "spi", "sti",
-					  "naki", "ali", "tmoi";
-			clocks = <&cpg CPG_MOD 84>;
-			power-domains = <&cpg>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		ostm0: timer@e803b000 {
-			compatible = "renesas,r7s9210-ostm", "renesas,ostm";
-			reg = <0xe803b000 0x30>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&cpg CPG_MOD 36>;
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		ostm1: timer@e803c000 {
-			compatible = "renesas,r7s9210-ostm", "renesas,ostm";
-			reg = <0xe803c000 0x30>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&cpg CPG_MOD 35>;
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		ostm2: timer@e803d000 {
-			compatible = "renesas,r7s9210-ostm", "renesas,ostm";
-			reg = <0xe803d000 0x30>;
-			interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&cpg CPG_MOD 34>;
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		ohci0: usb@e8218000 {
-			compatible = "generic-ohci";
-			reg = <0xe8218000 0x100>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 61>;
-			phys = <&usb2_phy0>;
-			phy-names = "usb";
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		ehci0: usb@e8218100 {
-			compatible = "generic-ehci";
-			reg = <0xe8218100 0x100>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 61>;
-			phys = <&usb2_phy0>;
-			phy-names = "usb";
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		usb2_phy0: usb-phy@e8218200 {
-			compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy";
-			reg = <0xe8218200 0x700>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 61>, <&usb_x1_clk>;
-			clock-names = "fck", "usb_x1";
-			power-domains = <&cpg>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		usbhs0: usb@e8219000 {
-			compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs";
-			reg = <0xe8219000 0x724>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 61>;
-			renesas,buswait = <7>;
-			phys = <&usb2_phy0>;
-			phy-names = "usb";
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		ohci1: usb@e821a000 {
-			compatible = "generic-ohci";
-			reg = <0xe821a000 0x100>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 60>;
-			phys = <&usb2_phy1>;
-			phy-names = "usb";
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		ehci1: usb@e821a100 {
-			compatible = "generic-ehci";
-			reg = <0xe821a100 0x100>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 60>;
-			phys = <&usb2_phy1>;
-			phy-names = "usb";
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		usb2_phy1: usb-phy@e821a200 {
-			compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy";
-			reg = <0xe821a200 0x700>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 60>, <&usb_x1_clk>;
-			clock-names = "fck", "usb_x1";
-			power-domains = <&cpg>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		usbhs1: usb@e821b000 {
-			compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs";
-			reg = <0xe821b000 0x724>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 60>;
-			renesas,buswait = <7>;
-			phys = <&usb2_phy1>;
-			phy-names = "usb";
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
-		sdhi0: mmc@e8228000 {
-			compatible = "renesas,sdhi-r7s9210";
-			reg = <0xe8228000 0x8c0>;
-			interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 103>, <&cpg CPG_MOD 102>;
-			clock-names = "core", "cd";
-			power-domains = <&cpg>;
-			cap-sd-highspeed;
-			cap-sdio-irq;
-			status = "disabled";
-		};
-
-		sdhi1: mmc@e822a000 {
-			compatible = "renesas,sdhi-r7s9210";
-			reg = <0xe822a000 0x8c0>;
-			interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 101>, <&cpg CPG_MOD 100>;
-			clock-names = "core", "cd";
-			power-domains = <&cpg>;
-			cap-sd-highspeed;
-			cap-sdio-irq;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@e8221000 {
-			compatible = "arm,gic-400";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0xe8221000 0x1000>,
-			      <0xe8222000 0x1000>;
-		};
-
-		cpg: clock-controller@fcfe0010 {
-			compatible = "renesas,r7s9210-cpg-mssr";
-			reg = <0xfcfe0010 0x455>;
-			clocks = <&extal_clk>;
-			clock-names = "extal";
-			#clock-cells = <2>;
-			#power-domain-cells = <0>;
-		};
-
-		wdt: watchdog@fcfe7000 {
-			compatible = "renesas,r7s9210-wdt", "renesas,rza-wdt";
-			reg = <0xfcfe7000 0x26>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_CORE R7S9210_CLK_P0>;
-		};
-
-		bsid: chipid@fcfe8004 {
-			compatible = "renesas,bsid";
-			reg = <0xfcfe8004 4>;
-		};
-
-		irqc: interrupt-controller@fcfef800 {
-			compatible = "renesas,r7s9210-irqc",
-				     "renesas,rza1-irqc";
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0xfcfef800 0x6>;
-			interrupt-map =
-				<0 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				<1 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-				<2 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-				<3 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-				<4 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-				<5 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				<6 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-				<7 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-map-mask = <7 0>;
-		};
-
-		pinctrl: pinctrl@fcffe000 {
-			compatible = "renesas,r7s9210-pinctrl";
-			reg = <0xfcffe000 0x1000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl 0 0 176>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
deleted file mode 100644
index e81a7213d3047..0000000000000
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ /dev/null
@@ -1,273 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the APE6EVM board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- */
-
-/dts-v1/;
-#include "r8a73a4.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "APE6EVM";
-	compatible = "renesas,ape6evm", "renesas,r8a73a4";
-
-	aliases {
-		serial0 = &scifa0;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	vcc_mmc0: regulator-mmc0 {
-		compatible = "regulator-fixed";
-		regulator-name = "MMC0 Vcc";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-
-	vcc_sdhi0: regulator-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	/* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */
-	ape6evm_fixed_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	ape6evm_fixed_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			gpios = <&pfc 28 GPIO_ACTIVE_HIGH>;
-			label = "GNSS_EN";
-		};
-		led2 {
-			gpios = <&pfc 126 GPIO_ACTIVE_HIGH>;
-			label = "NFC_NRST";
-		};
-		led3 {
-			gpios = <&pfc 132 GPIO_ACTIVE_HIGH>;
-			label = "GNSS_NRST";
-		};
-		led4 {
-			gpios = <&pfc 232 GPIO_ACTIVE_HIGH>;
-			label = "BT_WAKEUP";
-		};
-		led5 {
-			gpios = <&pfc 250 GPIO_ACTIVE_HIGH>;
-			label = "STROBE";
-		};
-		led6 {
-			gpios = <&pfc 288 GPIO_ACTIVE_HIGH>;
-			label = "BBRESETOUT";
-		};
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&keyboard_pins>;
-
-		zero-key {
-			gpios = <&pfc 324 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_0>;
-			label = "S16";
-			wakeup-source;
-		};
-
-		menu-key {
-			gpios = <&pfc 325 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-			label = "S17";
-		};
-
-		home-key {
-			gpios = <&pfc 326 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			label = "S18";
-		};
-
-		back-key {
-			gpios = <&pfc 327 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			label = "S19";
-		};
-
-		volup-key {
-			gpios = <&pfc 328 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			label = "S20";
-		};
-
-		voldown-key {
-			gpios = <&pfc 329 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			label = "S21";
-		};
-	};
-};
-
-&i2c5 {
-	status = "okay";
-	vdd_dvfs: regulator@1b {
-		compatible = "maxim,max8973";
-		reg = <0x1b>;
-
-		regulator-min-microvolt = <935000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-	operating-points = <1950000 1115000>,	/* kHz  uV */
-			   <1462500  995000>;
-	voltage-tolerance = <1>; /* 1% */
-};
-
-&bsc {
-	flash@0 {
-		compatible = "cfi-flash", "mtd-rom";
-		reg = <0x0 0x08000000>;
-		bank-width = <2>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "uboot-env";
-				reg = <0x00040000 0x00040000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "flash";
-				reg = <0x00080000 0x07f80000>;
-			};
-		};
-	};
-
-	ethernet@8000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x08000000 0x1000>;
-		interrupt-parent = <&irqc1>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		phy-mode = "mii";
-		reg-io-width = <4>;
-		smsc,irq-active-high;
-		smsc,irq-push-pull;
-		reset-gpios = <&pfc 270 GPIO_ACTIVE_LOW>;
-		vdd33a-supply = <&ape6evm_fixed_3v3>;
-		vddvario-supply = <&ape6evm_fixed_1v8>;
-	};
-};
-
-&cmt1 {
-	status = "okay";
-};
-
-&pfc {
-	scifa0_pins: scifa0 {
-		groups = "scifa0_data";
-		function = "scifa0";
-	};
-
-	mmc0_pins: mmc0 {
-		groups = "mmc0_data8", "mmc0_ctrl";
-		function = "mmc0";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
-		function = "sdhi0";
-	};
-
-	sdhi1_pins: sd1 {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-	};
-
-	keyboard_pins: keyboard {
-		pins = "PORT324", "PORT325", "PORT326", "PORT327", "PORT328",
-		       "PORT329";
-		bias-pull-up;
-	};
-};
-
-&mmcif0 {
-	vmmc-supply = <&vcc_mmc0>;
-	bus-width = <8>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	status = "okay";
-};
-
-&scifa0 {
-	pinctrl-0 = <&scifa0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	vmmc-supply = <&vcc_sdhi0>;
-	bus-width = <4>;
-	disable-wp;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhi0_pins>;
-	status = "okay";
-};
-
-&sdhi1 {
-	vmmc-supply = <&ape6evm_fixed_3v3>;
-	bus-width = <4>;
-	broken-cd;
-	disable-wp;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhi1_pins>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
deleted file mode 100644
index c39066967053f..0000000000000
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ /dev/null
@@ -1,861 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the r8a73a4 SoC
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- */
-
-#include <dt-bindings/clock/r8a73a4-clock.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a73a4";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clocks = <&cpg_clocks R8A73A4_CLK_Z>;
-			clock-frequency = <1500000000>;
-			power-domains = <&pd_a2sl>;
-			next-level-cache = <&L2_CA15>;
-		};
-
-		L2_CA15: cache-controller-0 {
-			compatible = "cache";
-			clocks = <&cpg_clocks R8A73A4_CLK_Z>;
-			power-domains = <&pd_a3sm>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		L2_CA7: cache-controller-1 {
-			compatible = "cache";
-			clocks = <&cpg_clocks R8A73A4_CLK_Z2>;
-			power-domains = <&pd_a3km>;
-			cache-unified;
-			cache-level = <2>;
-		};
-	};
-
-	ptm {
-		compatible = "arm,coresight-etm3x";
-		power-domains = <&pd_d4>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	dbsc1: memory-controller@e6790000 {
-		compatible = "renesas,dbsc-r8a73a4";
-		reg = <0 0xe6790000 0 0x10000>;
-		power-domains = <&pd_a3bc>;
-	};
-
-	dbsc2: memory-controller@e67a0000 {
-		compatible = "renesas,dbsc-r8a73a4";
-		reg = <0 0xe67a0000 0 0x10000>;
-		power-domains = <&pd_a3bc>;
-	};
-
-	i2c5: i2c@e60b0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
-		reg = <0 0xe60b0000 0 0x428>;
-		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R8A73A4_CLK_IIC5>;
-		power-domains = <&pd_a3sp>;
-
-		status = "disabled";
-	};
-
-	cmt1: timer@e6130000 {
-		compatible = "renesas,r8a73a4-cmt1", "renesas,rcar-gen2-cmt1";
-		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
-		clock-names = "fck";
-		power-domains = <&pd_c5>;
-		status = "disabled";
-	};
-
-	irqc0: interrupt-controller@e61c0000 {
-		compatible = "renesas,irqc-r8a73a4", "renesas,irqc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
-		power-domains = <&pd_c4>;
-	};
-
-	irqc1: interrupt-controller@e61c0200 {
-		compatible = "renesas,irqc-r8a73a4", "renesas,irqc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0 0xe61c0200 0 0x200>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
-		power-domains = <&pd_c4>;
-	};
-
-	pfc: pinctrl@e6050000 {
-		compatible = "renesas,pfc-r8a73a4";
-		reg = <0 0xe6050000 0 0x9000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges =
-			<&pfc 0 0 31>, <&pfc 32 32 9>,
-			<&pfc 64 64 22>, <&pfc 96 96 31>,
-			<&pfc 128 128 7>, <&pfc 160 160 19>,
-			<&pfc 192 192 31>, <&pfc 224 224 27>,
-			<&pfc 256 256 28>, <&pfc 288 288 21>,
-			<&pfc 320 320 10>;
-		interrupts-extended =
-			<&irqc0  0 0>, <&irqc0  1 0>, <&irqc0  2 0>, <&irqc0  3 0>,
-			<&irqc0  4 0>, <&irqc0  5 0>, <&irqc0  6 0>, <&irqc0  7 0>,
-			<&irqc0  8 0>, <&irqc0  9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
-			<&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
-			<&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
-			<&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
-			<&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
-			<&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
-			<&irqc1  0 0>, <&irqc1  1 0>, <&irqc1  2 0>, <&irqc1  3 0>,
-			<&irqc1  4 0>, <&irqc1  5 0>, <&irqc1  6 0>, <&irqc1  7 0>,
-			<&irqc1  8 0>, <&irqc1  9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
-			<&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
-			<&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
-			<&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
-			<&irqc1 24 0>, <&irqc1 25 0>;
-		power-domains = <&pd_c5>;
-	};
-
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
-		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
-			 <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
-		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
-		power-domains = <&pd_c5>;
-	};
-
-	i2c0: i2c@e6500000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
-		reg = <0 0xe6500000 0 0x428>;
-		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A73A4_CLK_IIC0>;
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@e6510000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
-		reg = <0 0xe6510000 0 0x428>;
-		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A73A4_CLK_IIC1>;
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@e6520000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
-		reg = <0 0xe6520000 0 0x428>;
-		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A73A4_CLK_IIC2>;
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@e6530000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
-		reg = <0 0xe6530000 0 0x428>;
-		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R8A73A4_CLK_IIC3>;
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	i2c4: i2c@e6540000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
-		reg = <0 0xe6540000 0 0x428>;
-		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R8A73A4_CLK_IIC4>;
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	i2c6: i2c@e6550000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
-		reg = <0 0xe6550000 0 0x428>;
-		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A73A4_CLK_IIC6>;
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	i2c7: i2c@e6560000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
-		reg = <0 0xe6560000 0 0x428>;
-		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A73A4_CLK_IIC7>;
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	i2c8: i2c@e6570000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
-		reg = <0 0xe6570000 0 0x428>;
-		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp5_clks R8A73A4_CLK_IIC8>;
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifb0: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
-		reg = <0 0xe6c20000 0 0x100>;
-		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifb1: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
-		reg = <0 0xe6c30000 0 0x100>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
-		reg = <0 0xe6c40000 0 0x100>;
-		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
-		reg = <0 0xe6c50000 0 0x100>;
-		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifb2: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 0x100>;
-		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifb3: serial@e6cf0000 {
-		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
-		reg = <0 0xe6cf0000 0 0x100>;
-		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>;
-		clock-names = "fck";
-		power-domains = <&pd_c4>;
-		status = "disabled";
-	};
-
-	sdhi0: mmc@ee100000 {
-		compatible = "renesas,sdhi-r8a73a4";
-		reg = <0 0xee100000 0 0x100>;
-		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A73A4_CLK_SDHI0>;
-		power-domains = <&pd_a3sp>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi1: mmc@ee120000 {
-		compatible = "renesas,sdhi-r8a73a4";
-		reg = <0 0xee120000 0 0x100>;
-		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A73A4_CLK_SDHI1>;
-		power-domains = <&pd_a3sp>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi2: mmc@ee140000 {
-		compatible = "renesas,sdhi-r8a73a4";
-		reg = <0 0xee140000 0 0x100>;
-		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A73A4_CLK_SDHI2>;
-		power-domains = <&pd_a3sp>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	mmcif0: mmc@ee200000 {
-		compatible = "renesas,mmcif-r8a73a4", "renesas,sh-mmcif";
-		reg = <0 0xee200000 0 0x80>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>;
-		power-domains = <&pd_a3sp>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
-
-	mmcif1: mmc@ee220000 {
-		compatible = "renesas,mmcif-r8a73a4", "renesas,sh-mmcif";
-		reg = <0 0xee220000 0 0x80>;
-		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>;
-		power-domains = <&pd_a3sp>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
-
-	gic: interrupt-controller@f1001000 {
-		compatible = "arm,gic-400";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0xf1001000 0 0x1000>,
-			<0 0xf1002000 0 0x2000>,
-			<0 0xf1004000 0 0x2000>,
-			<0 0xf1006000 0 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
-		clocks = <&mstp4_clks R8A73A4_CLK_INTC_SYS>;
-		clock-names = "clk";
-		power-domains = <&pd_c4>;
-	};
-
-	bsc: bus@fec10000 {
-		compatible = "renesas,bsc-r8a73a4", "renesas,bsc",
-			     "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x20000000>;
-		reg = <0 0xfec10000 0 0x400>;
-		clocks = <&zb_clk>;
-		power-domains = <&pd_c4>;
-	};
-
-	clocks {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		/* External root clocks */
-		extalr_clk: extalr {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-		extal1_clk: extal1 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-		extal2_clk: extal2 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <48000000>;
-		};
-		fsiack_clk: fsiack {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			/* This value must be overridden by the board. */
-			clock-frequency = <0>;
-		};
-		fsibck_clk: fsibck {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			/* This value must be overridden by the board. */
-			clock-frequency = <0>;
-		};
-
-		/* Special CPG clocks */
-		cpg_clocks: cpg_clocks@e6150000 {
-			compatible = "renesas,r8a73a4-cpg-clocks";
-			reg = <0 0xe6150000 0 0x10000>;
-			clocks = <&extal1_clk>, <&extal2_clk>;
-			#clock-cells = <1>;
-			clock-output-names = "main", "pll0", "pll1", "pll2",
-					     "pll2s", "pll2h", "z", "z2",
-					     "i", "m3", "b", "m1", "m2",
-					     "zx", "zs", "hp";
-		};
-
-		/* Variable factor clocks (DIV6) */
-		zb_clk: zb_clk@e6150010 {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150010 0 4>;
-			clocks = <&pll1_div2_clk>, <0>,
-				 <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>;
-			#clock-cells = <0>;
-			clock-output-names = "zb";
-		};
-		sdhi0_clk: sdhi0ck@e6150074 {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150074 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <0>, <&extal2_clk>;
-			#clock-cells = <0>;
-		};
-		sdhi1_clk: sdhi1ck@e6150078 {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150078 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <0>, <&extal2_clk>;
-			#clock-cells = <0>;
-		};
-		sdhi2_clk: sdhi2ck@e615007c {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615007c 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <0>, <&extal2_clk>;
-			#clock-cells = <0>;
-		};
-		mmc0_clk: mmc0@e6150240 {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150240 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <0>, <&extal2_clk>;
-			#clock-cells = <0>;
-		};
-		mmc1_clk: mmc1@e6150244 {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150244 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <0>, <&extal2_clk>;
-			#clock-cells = <0>;
-		};
-		vclk1_clk: vclk1@e6150008 {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150008 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <0>, <&extal2_clk>, <&main_div2_clk>,
-				 <&extalr_clk>, <0>, <0>;
-			#clock-cells = <0>;
-		};
-		vclk2_clk: vclk2@e615000c {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615000c 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <0>, <&extal2_clk>, <&main_div2_clk>,
-				 <&extalr_clk>, <0>, <0>;
-			#clock-cells = <0>;
-		};
-		vclk3_clk: vclk3@e615001c {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615001c 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <0>, <&extal2_clk>, <&main_div2_clk>,
-				 <&extalr_clk>, <0>, <0>;
-			#clock-cells = <0>;
-		};
-		vclk4_clk: vclk4@e6150014 {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150014 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <0>, <&extal2_clk>, <&main_div2_clk>,
-				 <&extalr_clk>, <0>, <0>;
-			#clock-cells = <0>;
-		};
-		vclk5_clk: vclk5@e6150034 {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150034 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <0>, <&extal2_clk>, <&main_div2_clk>,
-				 <&extalr_clk>, <0>, <0>;
-			#clock-cells = <0>;
-		};
-		fsia_clk: fsia@e6150018 {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150018 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <&fsiack_clk>, <0>;
-			#clock-cells = <0>;
-		};
-		fsib_clk: fsib@e6150090 {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150090 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <&fsibck_clk>, <0>;
-			#clock-cells = <0>;
-		};
-		mp_clk: mp@e6150080 {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150080 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <&extal2_clk>, <&extal2_clk>;
-			#clock-cells = <0>;
-		};
-		m4_clk: m4@e6150098 {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150098 0 4>;
-			clocks = <&cpg_clocks R8A73A4_CLK_PLL2S>;
-			#clock-cells = <0>;
-		};
-		hsi_clk: hsi@e615026c {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615026c 0 4>;
-			clocks = <&cpg_clocks R8A73A4_CLK_PLL2H>, <&pll1_div2_clk>,
-				 <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>;
-			#clock-cells = <0>;
-		};
-		spuv_clk: spuv@e6150094 {
-			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150094 0 4>;
-			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-				 <&extal2_clk>, <&extal2_clk>;
-			#clock-cells = <0>;
-		};
-
-		/* Fixed factor clocks */
-		main_div2_clk: main_div2 {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A73A4_CLK_MAIN>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-		pll0_div2_clk: pll0_div2 {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A73A4_CLK_PLL0>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-		pll1_div2_clk: pll1_div2 {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A73A4_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-		extal1_div2_clk: extal1_div2 {
-			compatible = "fixed-factor-clock";
-			clocks = <&extal1_clk>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		/* Gate clocks */
-		mstp2_clks: mstp2_clks@e6150138 {
-			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
-			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
-				 <&mp_clk>, <&mp_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A73A4_CLK_SCIFA0 R8A73A4_CLK_SCIFA1
-				R8A73A4_CLK_SCIFB0 R8A73A4_CLK_SCIFB1
-				R8A73A4_CLK_SCIFB2 R8A73A4_CLK_SCIFB3
-				R8A73A4_CLK_DMAC
-			>;
-			clock-output-names =
-				"scifa0", "scifa1", "scifb0", "scifb1",
-				"scifb2", "scifb3", "dmac";
-		};
-		mstp3_clks: mstp3_clks@e615013c {
-			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&cpg_clocks R8A73A4_CLK_HP>, <&mmc1_clk>,
-				 <&sdhi2_clk>, <&sdhi1_clk>, <&sdhi0_clk>,
-				 <&mmc0_clk>, <&cpg_clocks R8A73A4_CLK_HP>,
-				 <&cpg_clocks R8A73A4_CLK_HP>, <&cpg_clocks
-				 R8A73A4_CLK_HP>, <&cpg_clocks
-				 R8A73A4_CLK_HP>, <&extalr_clk>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A73A4_CLK_IIC2 R8A73A4_CLK_MMCIF1
-				R8A73A4_CLK_SDHI2 R8A73A4_CLK_SDHI1
-				R8A73A4_CLK_SDHI0 R8A73A4_CLK_MMCIF0
-				R8A73A4_CLK_IIC6 R8A73A4_CLK_IIC7
-				R8A73A4_CLK_IIC0 R8A73A4_CLK_IIC1
-				R8A73A4_CLK_CMT1
-			>;
-			clock-output-names =
-				"iic2", "mmcif1", "sdhi2", "sdhi1", "sdhi0",
-				"mmcif0", "iic6", "iic7", "iic0", "iic1",
-				"cmt1";
-		};
-		mstp4_clks: mstp4_clks@e6150140 {
-			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
-			clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_ZS>,
-				 <&main_div2_clk>,
-				 <&cpg_clocks R8A73A4_CLK_HP>,
-				 <&cpg_clocks R8A73A4_CLK_HP>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A73A4_CLK_IRQC R8A73A4_CLK_INTC_SYS
-				R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4
-				R8A73A4_CLK_IIC3
-			>;
-			clock-output-names =
-				"irqc", "intc-sys", "iic5", "iic4", "iic3";
-		};
-		mstp5_clks: mstp5_clks@e6150144 {
-			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&extal2_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A73A4_CLK_THERMAL R8A73A4_CLK_IIC8
-			>;
-			clock-output-names =
-				"thermal", "iic8";
-		};
-	};
-
-	prr: chipid@ff000044 {
-		compatible = "renesas,prr";
-		reg = <0 0xff000044 0 4>;
-	};
-
-	sysc: system-controller@e6180000 {
-		compatible = "renesas,sysc-r8a73a4", "renesas,sysc-rmobile";
-		reg = <0 0xe6180000 0 0x8000>, <0 0xe6188000 0 0x8000>;
-
-		pm-domains {
-			pd_c5: c5 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#power-domain-cells = <0>;
-
-				pd_c4: c4@0 {
-					reg = <0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#power-domain-cells = <0>;
-
-					pd_a3sg: a3sg@16 {
-						reg = <16>;
-						#power-domain-cells = <0>;
-					};
-
-					pd_a3ex: a3ex@17 {
-						reg = <17>;
-						#power-domain-cells = <0>;
-					};
-
-					pd_a3sp: a3sp@18 {
-						reg = <18>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#power-domain-cells = <0>;
-
-						pd_a2us: a2us@19 {
-							reg = <19>;
-							#power-domain-cells = <0>;
-						};
-					};
-
-					pd_a3sm: a3sm@20 {
-						reg = <20>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#power-domain-cells = <0>;
-
-						pd_a2sl: a2sl@21 {
-							reg = <21>;
-							#power-domain-cells = <0>;
-						};
-					};
-
-					pd_a3km: a3km@22 {
-						reg = <22>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#power-domain-cells = <0>;
-
-						pd_a2kl: a2kl@23 {
-							reg = <23>;
-							#power-domain-cells = <0>;
-						};
-					};
-				};
-
-				pd_c4ma: c4ma@1 {
-					reg = <1>;
-					#power-domain-cells = <0>;
-				};
-
-				pd_c4cl: c4cl@2 {
-					reg = <2>;
-					#power-domain-cells = <0>;
-				};
-
-				pd_d4: d4@3 {
-					reg = <3>;
-					#power-domain-cells = <0>;
-				};
-
-				pd_a4bc: a4bc@4 {
-					reg = <4>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#power-domain-cells = <0>;
-
-					pd_a3bc: a3bc@5 {
-						reg = <5>;
-						#power-domain-cells = <0>;
-					};
-				};
-
-				pd_a4l: a4l@6 {
-					reg = <6>;
-					#power-domain-cells = <0>;
-				};
-
-				pd_a4lc: a4lc@7 {
-					reg = <7>;
-					#power-domain-cells = <0>;
-				};
-
-				pd_a4mp: a4mp@8 {
-					reg = <8>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#power-domain-cells = <0>;
-
-					pd_a3mp: a3mp@9 {
-						reg = <9>;
-						#power-domain-cells = <0>;
-					};
-
-					pd_a3vc: a3vc@10 {
-						reg = <10>;
-						#power-domain-cells = <0>;
-					};
-				};
-
-				pd_a4sf: a4sf@11 {
-					reg = <11>;
-					#power-domain-cells = <0>;
-				};
-
-				pd_a3r: a3r@12 {
-					reg = <12>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#power-domain-cells = <0>;
-
-					pd_a2rv: a2rv@13 {
-						reg = <13>;
-						#power-domain-cells = <0>;
-					};
-
-					pd_a2is: a2is@14 {
-						reg = <14>;
-						#power-domain-cells = <0>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
deleted file mode 100644
index fa09295052c6e..0000000000000
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ /dev/null
@@ -1,325 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the armadillo 800 eva board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- */
-
-/dts-v1/;
-#include "r8a7740.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "armadillo 800 eva";
-	compatible = "renesas,armadillo800eva", "renesas,r8a7740";
-
-	aliases {
-		serial0 = &scifa1;
-	};
-
-	chosen {
-		bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=on rw";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_sdhi0: regulator-vcc-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_sdhi0>;
-
-		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
-		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
-		states = <3300000 0>, <1800000 1>;
-
-		enable-active-high;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-5.0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		power-key {
-			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "SW3";
-			wakeup-source;
-		};
-
-		back-key {
-			gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			label = "SW4";
-		};
-
-		menu-key {
-			gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-			label = "SW5";
-		};
-
-		home-key {
-			gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			label = "SW6";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led3 {
-			gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
-			label = "LED3";
-		};
-		led4 {
-			gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
-			label = "LED4";
-		};
-		led5 {
-			gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
-			label = "LED5";
-		};
-		led6 {
-			gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
-			label = "LED6";
-		};
-	};
-
-	i2c2: i2c-2 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		sda-gpios = <&pfc 208 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&pfc 91 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
-		default-brightness-level = <9>;
-		pinctrl-0 = <&backlight_pins>;
-		pinctrl-names = "default";
-		power-supply = <&reg_5p0v>;
-		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "i2s";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sh_fsi2 0>;
-			bitclock-inversion;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&wm8978>;
-			bitclock-master;
-			frame-master;
-			system-clock-frequency = <12288000>;
-		};
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy0>;
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-id0007.c0f1",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-		reset-gpios = <&pfc 18 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&extal1_clk {
-	clock-frequency = <24000000>;
-};
-&extal2_clk {
-	clock-frequency = <48000000>;
-};
-&fsibck_clk {
-	clock-frequency = <12288000>;
-};
-&cpg_clocks {
-	renesas,mode = <0x05>; /* MD_CK0 | MD_CK2 */
-};
-
-&cmt1 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	wm8978: codec@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8978";
-		reg = <0x1a>;
-	};
-
-	eeprom@50 {
-		compatible = "st,24c01", "atmel,24c01";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	touchscreen@55 {
-		compatible = "sitronix,st1232";
-		reg = <0x55>;
-		interrupt-parent = <&irqpin1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&st1232_pins>;
-		pinctrl-names = "default";
-		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	rtc@30 {
-		compatible = "sii,s35390a";
-		reg = <0x30>;
-	};
-};
-
-&pfc {
-	pinctrl-0 = <&lcd0_pins>;
-	pinctrl-names = "default";
-
-	ether_pins: ether {
-		groups = "gether_mii", "gether_int";
-		function = "gether";
-	};
-
-	scifa1_pins: scifa1 {
-		groups = "scifa1_data";
-		function = "scifa1";
-	};
-
-	st1232_pins: touchscreen {
-		groups = "intc_irq10";
-		function = "intc";
-	};
-
-	backlight_pins: backlight {
-		groups = "tpu0_to2_1";
-		function = "tpu0";
-	};
-
-	mmc0_pins: mmc0 {
-		groups = "mmc0_data8_1", "mmc0_ctrl_1";
-		function = "mmc0";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
-		function = "sdhi0";
-	};
-
-	fsia_pins: sounda {
-		groups = "fsia_sclk_in", "fsia_mclk_out",
-			 "fsia_data_in_1", "fsia_data_out_0";
-		function = "fsia";
-	};
-
-	lcd0_pins: lcd0 {
-		groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync";
-		function = "lcd0";
-	};
-
-	lcd0-mux-hog {
-		/* DBGMD/LCDC0/FSIA MUX */
-		gpio-hog;
-		gpios = <176 0>;
-		output-high;
-	};
-};
-
-&tpu {
-	status = "okay";
-};
-
-&mmcif0 {
-	pinctrl-0 = <&mmc0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&scifa1 {
-	pinctrl-0 = <&scifa1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	bus-width = <4>;
-	cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sh_fsi2 {
-	pinctrl-0 = <&fsia_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&tmu0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
deleted file mode 100644
index 1b2cf5fa322b2..0000000000000
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ /dev/null
@@ -1,736 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Mobile A1 (R8A77400) SoC
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- */
-
-#include <dt-bindings/clock/r8a7740-clock.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a7740";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x0>;
-			clock-frequency = <800000000>;
-			power-domains = <&pd_a3sm>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	gic: interrupt-controller@c2800000 {
-		compatible = "arm,pl390";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xc2800000 0x1000>,
-		      <0xc2000000 0x1000>;
-	};
-
-	L2: cache-controller@f0100000 {
-		compatible = "arm,pl310-cache";
-		reg = <0xf0100000 0x1000>;
-		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_a3sm>;
-		arm,data-latency = <3 3 3>;
-		arm,tag-latency = <2 2 2>;
-		arm,shared-override;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	dbsc3: memory-controller@fe400000 {
-		compatible = "renesas,dbsc3-r8a7740";
-		reg = <0xfe400000 0x400>;
-		power-domains = <&pd_a4s>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	ptm {
-		compatible = "arm,coresight-etm3x";
-		power-domains = <&pd_d4>;
-	};
-
-	ceu0: ceu@fe910000 {
-		reg = <0xfe910000 0x3000>;
-		compatible = "renesas,r8a7740-ceu";
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7740_CLK_CEU20>;
-		power-domains = <&pd_a4r>;
-		status = "disabled";
-	};
-
-	ceu1: ceu@fe914000 {
-		reg = <0xfe914000 0x3000>;
-		compatible = "renesas,r8a7740-ceu";
-		interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7740_CLK_CEU21>;
-		power-domains = <&pd_a4r>;
-		status = "disabled";
-	};
-
-	cmt1: timer@e6138000 {
-		compatible = "renesas,r8a7740-cmt1";
-		reg = <0xe6138000 0x170>;
-		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
-		clock-names = "fck";
-		power-domains = <&pd_c5>;
-		status = "disabled";
-	};
-
-	/* irqpin0: IRQ0 - IRQ7 */
-	irqpin0: interrupt-controller@e6900000 {
-		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900000 4>,
-			<0xe6900010 4>,
-			<0xe6900020 1>,
-			<0xe6900040 1>,
-			<0xe6900060 1>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
-		power-domains = <&pd_a4s>;
-	};
-
-	/* irqpin1: IRQ8 - IRQ15 */
-	irqpin1: interrupt-controller@e6900004 {
-		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900004 4>,
-			<0xe6900014 4>,
-			<0xe6900024 1>,
-			<0xe6900044 1>,
-			<0xe6900064 1>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
-		power-domains = <&pd_a4s>;
-	};
-
-	/* irqpin2: IRQ16 - IRQ23 */
-	irqpin2: interrupt-controller@e6900008 {
-		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900008 4>,
-			<0xe6900018 4>,
-			<0xe6900028 1>,
-			<0xe6900048 1>,
-			<0xe6900068 1>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
-		power-domains = <&pd_a4s>;
-	};
-
-	/* irqpin3: IRQ24 - IRQ31 */
-	irqpin3: interrupt-controller@e690000c {
-		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe690000c 4>,
-			<0xe690001c 4>,
-			<0xe690002c 1>,
-			<0xe690004c 1>,
-			<0xe690006c 1>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
-		power-domains = <&pd_a4s>;
-	};
-
-	ether: ethernet@e9a00000 {
-		compatible = "renesas,gether-r8a7740";
-		reg = <0xe9a00000 0x800>,
-		      <0xe9a01800 0x800>;
-		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
-		power-domains = <&pd_a4s>;
-		phy-mode = "mii";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c0: i2c@fff20000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
-		reg = <0xfff20000 0x425>;
-		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
-		power-domains = <&pd_a4r>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@e6c20000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
-		reg = <0xe6c20000 0x425>;
-		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c40000 0x100>;
-		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c50000 0x100>;
-		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c60000 0x100>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifa3: serial@e6c70000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c70000 0x100>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifa4: serial@e6c80000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c80000 0x100>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifa5: serial@e6cb0000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6cb0000 0x100>;
-		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifa6: serial@e6cc0000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6cc0000 0x100>;
-		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifa7: serial@e6cd0000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6cd0000 0x100>;
-		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	scifb: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7740", "renesas,scifb";
-		reg = <0xe6c30000 0x100>;
-		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	pfc: pinctrl@e6050000 {
-		compatible = "renesas,pfc-r8a7740";
-		reg = <0xe6050000 0x8000>,
-		      <0xe605800c 0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&pfc 0 0 212>;
-		interrupts-extended =
-			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
-			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
-			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
-			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
-			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
-			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
-			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
-			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
-		power-domains = <&pd_c5>;
-	};
-
-	tpu: pwm@e6600000 {
-		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
-		reg = <0xe6600000 0x148>;
-		clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-		#pwm-cells = <3>;
-	};
-
-	mmcif0: mmc@e6bd0000 {
-		compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
-		reg = <0xe6bd0000 0x100>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7740_CLK_MMC>;
-		power-domains = <&pd_a3sp>;
-		status = "disabled";
-	};
-
-	sdhi0: mmc@e6850000 {
-		compatible = "renesas,sdhi-r8a7740";
-		reg = <0xe6850000 0x100>;
-		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
-		power-domains = <&pd_a3sp>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi1: mmc@e6860000 {
-		compatible = "renesas,sdhi-r8a7740";
-		reg = <0xe6860000 0x100>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
-		power-domains = <&pd_a3sp>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi2: mmc@e6870000 {
-		compatible = "renesas,sdhi-r8a7740";
-		reg = <0xe6870000 0x100>;
-		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
-		power-domains = <&pd_a3sp>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sh_fsi2: sound@fe1f0000 {
-		#sound-dai-cells = <1>;
-		compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
-		reg = <0xfe1f0000 0x400>;
-		interrupts = <GIC_SPI 9 0x4>;
-		clocks = <&mstp3_clks R8A7740_CLK_FSI>;
-		power-domains = <&pd_a4mp>;
-		status = "disabled";
-	};
-
-	tmu0: timer@fff80000 {
-		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
-		reg = <0xfff80000 0x2c>;
-		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
-		clock-names = "fck";
-		power-domains = <&pd_a4r>;
-
-		#renesas,channels = <3>;
-
-		status = "disabled";
-	};
-
-	tmu1: timer@fff90000 {
-		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
-		reg = <0xfff90000 0x2c>;
-		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
-		clock-names = "fck";
-		power-domains = <&pd_a4r>;
-
-		#renesas,channels = <3>;
-
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* External root clock */
-		extalr_clk: extalr {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-		extal1_clk: extal1 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-		extal2_clk: extal2 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-		dv_clk: dv {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-		};
-		fmsick_clk: fmsick {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-		fmsock_clk: fmsock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-		fsiack_clk: fsiack {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-		fsibck_clk: fsibck {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		/* Special CPG clocks */
-		cpg_clocks: cpg_clocks@e6150000 {
-			compatible = "renesas,r8a7740-cpg-clocks";
-			reg = <0xe6150000 0x10000>;
-			clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
-			#clock-cells = <1>;
-			clock-output-names = "system", "pllc0", "pllc1",
-					     "pllc2", "r",
-					     "usb24s",
-					     "i", "zg", "b", "m1", "hp",
-					     "hpp", "usbp", "s", "zb", "m3",
-					     "cp";
-		};
-
-		/* Variable factor clocks (DIV6) */
-		vclk1_clk: vclk1@e6150008 {
-			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0xe6150008 4>;
-			clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>,
-				 <&cpg_clocks R8A7740_CLK_USB24S>,
-				 <&extal1_div2_clk>, <&extalr_clk>, <0>,
-				 <0>;
-			#clock-cells = <0>;
-		};
-		vclk2_clk: vclk2@e615000c {
-			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0xe615000c 4>;
-			clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>,
-				 <&cpg_clocks R8A7740_CLK_USB24S>,
-				 <&extal1_div2_clk>, <&extalr_clk>, <0>,
-				 <0>;
-			#clock-cells = <0>;
-		};
-		fmsi_clk: fmsi@e6150010 {
-			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0xe6150010 4>;
-			clocks = <&pllc1_div2_clk>, <&fmsick_clk>, <0>, <0>;
-			#clock-cells = <0>;
-		};
-		fmso_clk: fmso@e6150014 {
-			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0xe6150014 4>;
-			clocks = <&pllc1_div2_clk>, <&fmsock_clk>, <0>, <0>;
-			#clock-cells = <0>;
-		};
-		fsia_clk: fsia@e6150018 {
-			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0xe6150018 4>;
-			clocks = <&pllc1_div2_clk>, <&fsiack_clk>, <0>, <0>;
-			#clock-cells = <0>;
-		};
-		sub_clk: sub@e6150080 {
-			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0xe6150080 4>;
-			clocks = <&pllc1_div2_clk>,
-				 <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>;
-			#clock-cells = <0>;
-		};
-		spu_clk: spu@e6150084 {
-			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0xe6150084 4>;
-			clocks = <&pllc1_div2_clk>,
-				 <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>;
-			#clock-cells = <0>;
-		};
-		vou_clk: vou@e6150088 {
-			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0xe6150088 4>;
-			clocks = <&pllc1_div2_clk>, <&extal1_clk>, <&dv_clk>,
-				 <0>;
-			#clock-cells = <0>;
-		};
-		stpro_clk: stpro@e615009c {
-			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0xe615009c 4>;
-			clocks = <&cpg_clocks R8A7740_CLK_PLLC0>;
-			#clock-cells = <0>;
-		};
-
-		/* Fixed factor clocks */
-		pllc1_div2_clk: pllc1_div2 {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7740_CLK_PLLC1>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-		extal1_div2_clk: extal1_div2 {
-			compatible = "fixed-factor-clock";
-			clocks = <&extal1_clk>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		/* Gate clocks */
-		subck_clks: subck_clks@e6150080 {
-			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xe6150080 4>;
-			clocks = <&sub_clk>, <&sub_clk>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7740_CLK_SUBCK R8A7740_CLK_SUBCK2
-			>;
-			clock-output-names =
-				"subck", "subck2";
-		};
-		mstp1_clks: mstp1_clks@e6150134 {
-			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xe6150134 4>, <0xe6150038 4>;
-			clocks = <&cpg_clocks R8A7740_CLK_S>,
-				 <&cpg_clocks R8A7740_CLK_S>, <&sub_clk>,
-				 <&cpg_clocks R8A7740_CLK_B>,
-				 <&cpg_clocks R8A7740_CLK_HPP>, <&sub_clk>,
-				 <&cpg_clocks R8A7740_CLK_B>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7740_CLK_CEU21 R8A7740_CLK_CEU20 R8A7740_CLK_TMU0
-				R8A7740_CLK_LCDC1 R8A7740_CLK_IIC0 R8A7740_CLK_TMU1
-				R8A7740_CLK_LCDC0
-			>;
-			clock-output-names =
-				"ceu21", "ceu20", "tmu0", "lcdc1", "iic0",
-				"tmu1", "lcdc0";
-		};
-		mstp2_clks: mstp2_clks@e6150138 {
-			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xe6150138 4>, <0xe6150040 4>;
-			clocks = <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>,
-				 <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>,
-				 <&cpg_clocks R8A7740_CLK_HP>,
-				 <&cpg_clocks R8A7740_CLK_HP>,
-				 <&cpg_clocks R8A7740_CLK_HP>,
-				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
-				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
-				 <&sub_clk>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7740_CLK_SCIFA6 R8A7740_CLK_INTCA
-				R8A7740_CLK_SCIFA7
-				R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2
-				R8A7740_CLK_DMAC3 R8A7740_CLK_USBDMAC
-				R8A7740_CLK_SCIFA5 R8A7740_CLK_SCIFB
-				R8A7740_CLK_SCIFA0 R8A7740_CLK_SCIFA1
-				R8A7740_CLK_SCIFA2 R8A7740_CLK_SCIFA3
-				R8A7740_CLK_SCIFA4
-			>;
-			clock-output-names =
-				"scifa6", "intca",
-				"scifa7", "dmac1", "dmac2", "dmac3",
-				"usbdmac", "scifa5", "scifb", "scifa0", "scifa1",
-				"scifa2", "scifa3", "scifa4";
-		};
-		mstp3_clks: mstp3_clks@e615013c {
-			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xe615013c 4>, <0xe6150048 4>;
-			clocks = <&cpg_clocks R8A7740_CLK_R>,
-				 <&cpg_clocks R8A7740_CLK_HP>,
-				 <&sub_clk>,
-				 <&cpg_clocks R8A7740_CLK_HP>,
-				 <&cpg_clocks R8A7740_CLK_HP>,
-				 <&cpg_clocks R8A7740_CLK_HP>,
-				 <&cpg_clocks R8A7740_CLK_HP>,
-				 <&cpg_clocks R8A7740_CLK_HP>,
-				 <&cpg_clocks R8A7740_CLK_HP>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7740_CLK_CMT1 R8A7740_CLK_FSI R8A7740_CLK_IIC1
-				R8A7740_CLK_USBF R8A7740_CLK_SDHI0 R8A7740_CLK_SDHI1
-				R8A7740_CLK_MMC R8A7740_CLK_GETHER R8A7740_CLK_TPU0
-			>;
-			clock-output-names =
-				"cmt1", "fsi", "iic1", "usbf", "sdhi0", "sdhi1",
-				"mmc", "gether", "tpu0";
-		};
-		mstp4_clks: mstp4_clks@e6150140 {
-			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xe6150140 4>, <0xe615004c 4>;
-			clocks = <&cpg_clocks R8A7740_CLK_HP>,
-				 <&cpg_clocks R8A7740_CLK_HP>,
-				 <&cpg_clocks R8A7740_CLK_HP>,
-				 <&cpg_clocks R8A7740_CLK_HP>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7740_CLK_USBH R8A7740_CLK_SDHI2
-				R8A7740_CLK_USBFUNC R8A7740_CLK_USBPHY
-			>;
-			clock-output-names =
-				"usbhost", "sdhi2", "usbfunc", "usphy";
-		};
-	};
-
-	sysc: system-controller@e6180000 {
-		compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
-		reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
-
-		pm-domains {
-			pd_c5: c5 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#power-domain-cells = <0>;
-
-				pd_a4lc: a4lc@1 {
-					reg = <1>;
-					#power-domain-cells = <0>;
-				};
-
-				pd_a4mp: a4mp@2 {
-					reg = <2>;
-					#power-domain-cells = <0>;
-				};
-
-				pd_d4: d4@3 {
-					reg = <3>;
-					#power-domain-cells = <0>;
-				};
-
-				pd_a4r: a4r@5 {
-					reg = <5>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#power-domain-cells = <0>;
-
-					pd_a3rv: a3rv@6 {
-						reg = <6>;
-						#power-domain-cells = <0>;
-					};
-				};
-
-				pd_a4s: a4s@10 {
-					reg = <10>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#power-domain-cells = <0>;
-
-					pd_a3sp: a3sp@11 {
-						reg = <11>;
-						#power-domain-cells = <0>;
-					};
-
-					pd_a3sm: a3sm@12 {
-						reg = <12>;
-						#power-domain-cells = <0>;
-					};
-
-					pd_a3sg: a3sg@13 {
-						reg = <13>;
-						#power-domain-cells = <0>;
-					};
-				};
-
-				pd_a4su: a4su@20 {
-					reg = <20>;
-					#power-domain-cells = <0>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
deleted file mode 100644
index 33ac4bd1e63bd..0000000000000
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ /dev/null
@@ -1,350 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave-RZ/G1H Qseven board development
- * platform with camera daughter board
- *
- * Copyright (C) 2020 Renesas Electronics Corp.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/media/video-interfaces.h>
-
-#include "r8a7742-iwg21d-q7.dts"
-
-/ {
-	model = "iWave Systems RZ/G1H Qseven development platform with camera add-on";
-	compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742";
-
-	aliases {
-		serial0 = &scif0;
-		serial1 = &scif1;
-		serial3 = &scifb1;
-		serial5 = &hscif0;
-		ethernet1 = &ether;
-	};
-
-	mclk_cam1: mclk-cam1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	mclk_cam2: mclk-cam2 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	mclk_cam3: mclk-cam3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	mclk_cam4: mclk-cam4 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	reg_1p8v: 1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	reg_2p8v: 2p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-};
-
-&avb {
-	/* Pins shared with VIN0, keep status disabled */
-	status = "disabled";
-};
-
-&can0 {
-	pinctrl-0 = <&can0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0022.1560",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&gpio0 {
-	/* Disable hogging GP0_18 to output LOW */
-	/delete-node/ qspi-en-hog;
-
-	/* Hog GP0_18 to output HIGH to enable VIN2 */
-	vin2-en-hog {
-		gpio-hog;
-		gpios = <18 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "VIN2_EN";
-	};
-};
-
-&hscif0 {
-	pinctrl-0 = <&hscif0_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-
-	/* status set to "okay" when needed by camera configuration below */
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "default";
-
-	/* status set to "okay" when needed by camera configuration below */
-	clock-frequency = <400000>;
-};
-
-&pfc {
-	can0_pins: can0 {
-		groups = "can0_data_d";
-		function = "can0";
-	};
-
-	ether_pins: ether {
-		groups = "eth_mdio", "eth_rmii";
-		function = "eth";
-	};
-
-	hscif0_pins: hscif0 {
-		groups = "hscif0_data", "hscif0_ctrl";
-		function = "hscif0";
-	};
-
-	i2c1_pins: i2c1 {
-		groups = "i2c1_c";
-		function = "i2c1";
-	};
-
-	i2c3_pins: i2c3 {
-		groups = "i2c3";
-		function = "i2c3";
-	};
-
-	scif0_pins: scif0 {
-		groups = "scif0_data";
-		function = "scif0";
-	};
-
-	scif1_pins: scif1 {
-		groups = "scif1_data";
-		function = "scif1";
-	};
-
-	scifb1_pins: scifb1 {
-		groups = "scifb1_data";
-		function = "scifb1";
-	};
-
-	vin0_8bit_pins: vin0 {
-		groups = "vin0_data8", "vin0_clk", "vin0_sync";
-		function = "vin0";
-	};
-
-	vin1_8bit_pins: vin1 {
-		groups = "vin1_data8_b", "vin1_clk_b", "vin1_sync_b";
-		function = "vin1";
-	};
-
-	vin2_pins: vin2 {
-		groups = "vin2_g8", "vin2_clk";
-		function = "vin2";
-	};
-
-	vin3_pins: vin3 {
-		groups = "vin3_data8", "vin3_clk", "vin3_sync";
-		function = "vin3";
-	};
-};
-
-&qspi {
-	/* Pins shared with VIN2, keep status disabled */
-	status = "disabled";
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&scif1 {
-	pinctrl-0 = <&scif1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&scifb1 {
-	pinctrl-0 = <&scifb1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	rts-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
-	cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
-};
-
-/*
- * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints
- *
- * (un)comment the #include statements to change configuration
- */
-
-/* 8bit CMOS Camera 1 (J13) */
-#define CAM_PARENT_I2C		i2c0
-#define MCLK_CAM		mclk_cam1
-#define CAM_EP			cam0ep
-#define VIN_EP			vin0ep
-#undef CAM_ENABLED
-#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
-//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
-
-#ifdef CAM_ENABLED
-&vin0 {
-	/*
-	 * Set SW2 switch on the SOM to 'ON'
-	 * Set SW1 switch on camera board to 'OFF' as we are using 8bit mode
-	 */
-	status = "okay";
-	pinctrl-0 = <&vin0_8bit_pins>;
-	pinctrl-names = "default";
-
-	port {
-		vin0ep: endpoint {
-			remote-endpoint = <&cam0ep>;
-			bus-width = <8>;
-			bus-type = <MEDIA_BUS_TYPE_BT656>;
-		};
-	};
-};
-#endif /* CAM_ENABLED */
-
-#undef CAM_PARENT_I2C
-#undef MCLK_CAM
-#undef CAM_EP
-#undef VIN_EP
-
-/* 8bit CMOS Camera 2 (J14) */
-#define CAM_PARENT_I2C		i2c1
-#define MCLK_CAM		mclk_cam2
-#define CAM_EP			cam1ep
-#define VIN_EP			vin1ep
-#undef CAM_ENABLED
-#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
-//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
-
-#ifdef CAM_ENABLED
-&vin1 {
-	/* Set SW1 switch on the SOM to 'ON' */
-	status = "okay";
-	pinctrl-0 = <&vin1_8bit_pins>;
-	pinctrl-names = "default";
-
-	port {
-		vin1ep: endpoint {
-			remote-endpoint = <&cam1ep>;
-			bus-width = <8>;
-			bus-type = <MEDIA_BUS_TYPE_BT656>;
-		};
-	};
-};
-
-#endif /* CAM_ENABLED */
-
-#undef CAM_PARENT_I2C
-#undef MCLK_CAM
-#undef CAM_EP
-#undef VIN_EP
-
-/* 8bit CMOS Camera 3 (J12) */
-#define CAM_PARENT_I2C		i2c2
-#define MCLK_CAM		mclk_cam3
-#define CAM_EP			cam2ep
-#define VIN_EP			vin2ep
-#undef CAM_ENABLED
-#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
-//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
-
-#ifdef CAM_ENABLED
-&vin2 {
-	status = "okay";
-	pinctrl-0 = <&vin2_pins>;
-	pinctrl-names = "default";
-
-	port {
-		vin2ep: endpoint {
-			remote-endpoint = <&cam2ep>;
-			bus-width = <8>;
-			data-shift = <8>;
-			bus-type = <MEDIA_BUS_TYPE_BT656>;
-		};
-	};
-};
-#endif /* CAM_ENABLED */
-
-#undef CAM_PARENT_I2C
-#undef MCLK_CAM
-#undef CAM_EP
-#undef VIN_EP
-
-/* 8bit CMOS Camera 4 (J11) */
-#define CAM_PARENT_I2C		i2c3
-#define MCLK_CAM		mclk_cam4
-#define CAM_EP			cam3ep
-#define VIN_EP			vin3ep
-#undef CAM_ENABLED
-#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
-//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
-
-#ifdef CAM_ENABLED
-&vin3 {
-	status = "okay";
-	pinctrl-0 = <&vin3_pins>;
-	pinctrl-names = "default";
-
-	port {
-		vin3ep: endpoint {
-			remote-endpoint = <&cam3ep>;
-			bus-width = <8>;
-			bus-type = <MEDIA_BUS_TYPE_BT656>;
-		};
-	};
-};
-#endif /* CAM_ENABLED */
-
-#undef CAM_PARENT_I2C
-#undef MCLK_CAM
-#undef CAM_EP
-#undef VIN_EP
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
deleted file mode 100644
index c73160df619de..0000000000000
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This include file ties a VIN interface with a single ov5640 sensor on
- * the iWave-RZ/G1H Qseven board development platform connected with the
- * camera daughter board.
- *
- * Copyright (C) 2020 Renesas Electronics Corp.
- */
-
-#include <dt-bindings/media/video-interfaces.h>
-
-#define CAM_ENABLED	1
-
-&CAM_PARENT_I2C {
-	status = "okay";
-
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		clocks = <&MCLK_CAM>;
-		clock-names = "xclk";
-		AVDD-supply = <&reg_2p8v>;
-		DOVDD-supply = <&reg_2p8v>;
-		DVDD-supply = <&reg_1p8v>;
-		status = "okay";
-
-		port {
-			CAM_EP: endpoint {
-				bus-width = <8>;
-				data-shift = <2>;
-				bus-type = <MEDIA_BUS_TYPE_BT656>;
-				pclk-sample = <1>;
-				remote-endpoint = <&VIN_EP>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
deleted file mode 100644
index a7f5cfec64b89..0000000000000
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This include file ties a VIN interface with a single ov7725 sensor on
- * the iWave-RZ/G1H Qseven board development platform connected with the
- * camera daughter board.
- *
- * Copyright (C) 2020 Renesas Electronics Corp.
- */
-
-#include <dt-bindings/media/video-interfaces.h>
-
-#define CAM_ENABLED	1
-
-&CAM_PARENT_I2C {
-	status = "okay";
-
-	ov7725@21 {
-		compatible = "ovti,ov7725";
-		reg = <0x21>;
-		clocks = <&MCLK_CAM>;
-		status = "okay";
-
-		port {
-			CAM_EP: endpoint {
-				bus-width = <8>;
-				bus-type = <MEDIA_BUS_TYPE_BT656>;
-				remote-endpoint = <&VIN_EP>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
deleted file mode 100644
index 64102b664055b..0000000000000
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ /dev/null
@@ -1,445 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave-RZ/G1H Qseven board
- *
- * Copyright (C) 2020 Renesas Electronics Corp.
- */
-
-/*
- * SSI-SGTL5000
- *
- * This command is required when Playback/Capture
- *
- *      amixer set "DVC Out" 100%
- *      amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- *      amixer set "DVC Out Mute" on
- *      amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
- *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- *      amixer set "DVC Out Ramp" on
- *      aplay xxx.wav &
- *      amixer set "DVC Out"  80%  // Volume Down
- *      amixer set "DVC Out" 100%  // Volume Up
- */
-
-/dts-v1/;
-#include "r8a7742-iwg21m.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H";
-	compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742";
-
-	aliases {
-		serial2 = &scifa2;
-		serial4 = &scifb2;
-		ethernet0 = &avb;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel root=/dev/mmcblk0p1 rw rootwait";
-		stdout-path = "serial2:115200n8";
-	};
-
-	audio_clock: audio_clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	lcd_backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&tpu 2 5000000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		pinctrl-0 = <&backlight_pins>;
-		pinctrl-names = "default";
-		default-brightness-level = <7>;
-		enable-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		sdhi2_led {
-			label = "sdio-led";
-			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-		};
-	};
-
-	lvds-receiver {
-		compatible = "ti,ds90cf384a", "lvds-decoder";
-		power-supply = <&vcc_3v3_tft1>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				lvds_receiver_in: endpoint {
-					remote-endpoint = <&lvds0_out>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				lvds_receiver_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
-
-	panel {
-		compatible = "edt,etm0700g0dh6";
-		backlight = <&lcd_backlight>;
-		power-supply = <&vcc_3v3_tft1>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds_receiver_out>;
-			};
-		};
-	};
-
-	reg_1p5v: 1p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P5V";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-	};
-
-	rsnd_sgtl5000: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-
-	vcc_3v3_tft1: regulator-panel {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vcc-3v3-tft1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		startup-delay-us = <500>;
-		gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
-	};
-
-	vcc_sdhi2: regulator-vcc-sdhi2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	};
-
-	vccq_sdhi2: regulator-vccq-sdhi2 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-};
-
-&avb {
-	pinctrl-0 = <&avb_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy3>;
-	phy-mode = "gmii";
-	renesas,no-ether-link;
-	status = "okay";
-
-	phy3: ethernet-phy@3 {
-		compatible = "ethernet-phy-id0022.1622",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <3>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		clocks = <&audio_clock>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		VDDD-supply = <&reg_1p5v>;
-	};
-
-	touch: touchpanel@38 {
-		compatible = "edt,edt-ft5406";
-		reg = <0x38>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
-		/* GP1_29 is also shared with audio codec reset pin */
-		reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&vcc_3v3_tft1>;
-	};
-};
-
-&can1 {
-	pinctrl-0 = <&can1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&cmt0 {
-	status = "okay";
-};
-
-&du {
-	status = "okay";
-};
-
-&gpio0 {
-	touch-interrupt-hog {
-		gpio-hog;
-		gpios = <24 GPIO_ACTIVE_LOW>;
-		input;
-	};
-};
-
-&gpio1 {
-	can-trx-en-hog {
-		gpio-hog;
-		gpios = <28 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "can-trx-en-gpio";
-	};
-};
-
-&hsusb {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&lvds0 {
-	status = "okay";
-	ports {
-		port@1 {
-			lvds0_out: endpoint {
-				remote-endpoint = <&lvds_receiver_in>;
-			};
-		};
-	};
-};
-
-&msiof0 {
-	pinctrl-0 = <&msiof0_pins>;
-	pinctrl-names = "default";
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-
-	flash1: flash@0 {
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "user";
-				reg = <0x00000000 0x00200000>;
-			};
-		};
-	};
-};
-
-&pci0 {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-	/* Disable hsusb to enable USB2.0 host mode support on J2 */
-	/* status = "okay"; */
-};
-
-&pci1 {
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&pci2 {
-	/* Disable xhci to enable USB2.0 host mode support on J23 bottom port */
-	/* status = "okay"; */
-};
-
-&pcie_bus_clk {
-	clock-frequency = <100000000>;
-};
-
-&pciec {
-	/* SW2[6] determines which connector is activated
-	 * ON = PCIe X4 (connector-J7)
-	 * OFF = mini-PCIe (connector-J26)
-	 */
-	status = "okay";
-};
-
-&pfc {
-	avb_pins: avb {
-		groups = "avb_mdio", "avb_gmii";
-		function = "avb";
-	};
-
-	backlight_pins: backlight {
-		groups = "tpu0_to2";
-		function = "tpu0";
-	};
-
-	can1_pins: can1 {
-		groups = "can1_data_b";
-		function = "can1";
-	};
-
-	i2c2_pins: i2c2 {
-		groups = "i2c2_b";
-		function = "i2c2";
-	};
-
-	msiof0_pins: msiof0 {
-		groups = "msiof0_clk", "msiof0_sync", "msiof0_tx", "msiof0_rx";
-		function = "msiof0";
-	};
-
-	scifa2_pins: scifa2 {
-		groups = "scifa2_data_c";
-		function = "scifa2";
-	};
-
-	scifb2_pins: scifb2 {
-		groups = "scifb2_data", "scifb2_ctrl";
-		function = "scifb2";
-	};
-
-	sdhi2_pins: sd2 {
-		groups = "sdhi2_data4", "sdhi2_ctrl";
-		function = "sdhi2";
-		power-source = <3300>;
-	};
-
-	sdhi2_pins_uhs: sd2_uhs {
-		groups = "sdhi2_data4", "sdhi2_ctrl";
-		function = "sdhi2";
-		power-source = <1800>;
-	};
-
-	sound_pins: sound {
-		groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
-		function = "ssi";
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1_pwen";
-		function = "usb1";
-	};
-};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi4>, <&src4>, <&dvc1>;
-			capture = <&ssi3>, <&src3>, <&dvc0>;
-		};
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&scifa2 {
-	pinctrl-0 = <&scifa2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scifb2 {
-	pinctrl-0 = <&scifb2_pins>;
-	pinctrl-names = "default";
-
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-1 = <&sdhi2_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-	sd-uhs-sdr50;
-	status = "okay";
-};
-
-&ssi4 {
-	shared-pin;
-};
-
-&tpu {
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&xhci {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
deleted file mode 100644
index b281a4d164b0a..0000000000000
--- a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave RZ/G1H Qseven SOM
- *
- * Copyright (C) 2020 Renesas Electronics Corp.
- */
-
-#include "r8a7742.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "iwave,g21m", "renesas,r8a7742";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	reg_3p3v: 3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&gpio0 {
-	/* GP0_18 set low to select QSPI. Doing so will disable VIN2 */
-	qspi-en-hog {
-		gpio-hog;
-		gpios = <18 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "QSPI_EN";
-	};
-};
-
-&i2c0 {
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	rtc@68 {
-		compatible = "ti,bq32000";
-		reg = <0x68>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&mmcif1 {
-	pinctrl-0 = <&mmc1_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
-&pfc {
-	i2c0_pins: i2c0 {
-		groups = "i2c0";
-		function = "i2c0";
-	};
-
-	mmc1_pins: mmc1 {
-		groups = "mmc1_data4", "mmc1_ctrl";
-		function = "mmc1";
-	};
-
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data2";
-		function = "qspi";
-	};
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		m25p,fast-read;
-		spi-cpol;
-		spi-cpha;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "bootloader";
-				reg = <0x00000000 0x000c0000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "env";
-				reg = <0x000c0000 0x00002000>;
-			};
-			partition@c2000 {
-				label = "user";
-				reg = <0x000c2000 0x0013e000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
deleted file mode 100644
index 16d146db824a0..0000000000000
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ /dev/null
@@ -1,1891 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the r8a7742 SoC
- *
- * Copyright (C) 2020 Renesas Electronics Corp.
- */
-
-#include <dt-bindings/clock/r8a7742-cpg-mssr.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/power/r8a7742-sysc.h>
-
-/ {
-	compatible = "renesas,r8a7742";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	/*
-	 * The external audio clocks are configured as 0 Hz fixed frequency
-	 * clocks by default.
-	 * Boards that provide audio clocks should override them.
-	 */
-	audio_clk_a: audio_clk_a {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clk_b: audio_clk_b {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clk_c: audio_clk_c {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	/* External CAN clock */
-	can_clk: can {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1400000000>;
-			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
-			power-domains = <&sysc R8A7742_PD_CA15_CPU0>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-			capacity-dmips-mhz = <1024>;
-			voltage-tolerance = <1>; /* 1% */
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1400000 1000000>,
-					   <1225000 1000000>,
-					   <1050000 1000000>,
-					   < 875000 1000000>,
-					   < 700000 1000000>,
-					   < 350000 1000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1400000000>;
-			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
-			power-domains = <&sysc R8A7742_PD_CA15_CPU1>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-			capacity-dmips-mhz = <1024>;
-			voltage-tolerance = <1>; /* 1% */
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1400000 1000000>,
-					   <1225000 1000000>,
-					   <1050000 1000000>,
-					   < 875000 1000000>,
-					   < 700000 1000000>,
-					   < 350000 1000000>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-			clock-frequency = <1400000000>;
-			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
-			power-domains = <&sysc R8A7742_PD_CA15_CPU2>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-			capacity-dmips-mhz = <1024>;
-			voltage-tolerance = <1>; /* 1% */
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1400000 1000000>,
-					   <1225000 1000000>,
-					   <1050000 1000000>,
-					   < 875000 1000000>,
-					   < 700000 1000000>,
-					   < 350000 1000000>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-			clock-frequency = <1400000000>;
-			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
-			power-domains = <&sysc R8A7742_PD_CA15_CPU3>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-			capacity-dmips-mhz = <1024>;
-			voltage-tolerance = <1>; /* 1% */
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1400000 1000000>,
-					   <1225000 1000000>,
-					   <1050000 1000000>,
-					   < 875000 1000000>,
-					   < 700000 1000000>,
-					   < 350000 1000000>;
-		};
-
-		cpu4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clock-frequency = <780000000>;
-			clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>;
-			power-domains = <&sysc R8A7742_PD_CA7_CPU0>;
-			next-level-cache = <&L2_CA7>;
-		};
-
-		cpu5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clock-frequency = <780000000>;
-			clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>;
-			power-domains = <&sysc R8A7742_PD_CA7_CPU1>;
-			next-level-cache = <&L2_CA7>;
-		};
-
-		cpu6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clock-frequency = <780000000>;
-			clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>;
-			power-domains = <&sysc R8A7742_PD_CA7_CPU2>;
-			next-level-cache = <&L2_CA7>;
-		};
-
-		cpu7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clock-frequency = <780000000>;
-			clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>;
-			power-domains = <&sysc R8A7742_PD_CA7_CPU3>;
-			next-level-cache = <&L2_CA7>;
-		};
-
-		L2_CA15: cache-controller-0 {
-			compatible = "cache";
-			power-domains = <&sysc R8A7742_PD_CA15_SCU>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		L2_CA7: cache-controller-1 {
-			compatible = "cache";
-			power-domains = <&sysc R8A7742_PD_CA7_SCU>;
-			cache-unified;
-			cache-level = <2>;
-		};
-	};
-
-	/* External root clock */
-	extal_clk: extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	/* External PCIe clock - can be overridden by the board */
-	pcie_bus_clk: pcie_bus {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	pmu-0 {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	pmu-1 {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
-	};
-
-	/* External SCIF clock */
-	scif_clk: scif {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		rwdt: watchdog@e6020000 {
-			compatible = "renesas,r8a7742-wdt",
-				     "renesas,rcar-gen2-wdt";
-			reg = <0 0xe6020000 0 0x0c>;
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 402>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 402>;
-			status = "disabled";
-		};
-
-		gpio0: gpio@e6050000 {
-			compatible = "renesas,gpio-r8a7742",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6050000 0 0x50>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 0 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 912>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 912>;
-		};
-
-		gpio1: gpio@e6051000 {
-			compatible = "renesas,gpio-r8a7742",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6051000 0 0x50>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 32 30>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 911>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 911>;
-		};
-
-		gpio2: gpio@e6052000 {
-			compatible = "renesas,gpio-r8a7742",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6052000 0 0x50>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 64 30>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 910>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 910>;
-		};
-
-		gpio3: gpio@e6053000 {
-			compatible = "renesas,gpio-r8a7742",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6053000 0 0x50>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 96 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 909>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 909>;
-		};
-
-		gpio4: gpio@e6054000 {
-			compatible = "renesas,gpio-r8a7742",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6054000 0 0x50>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 128 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 908>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 908>;
-		};
-
-		gpio5: gpio@e6055000 {
-			compatible = "renesas,gpio-r8a7742",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055000 0 0x50>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 160 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 907>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 907>;
-		};
-
-		pfc: pinctrl@e6060000 {
-			compatible = "renesas,pfc-r8a7742";
-			reg = <0 0xe6060000 0 0x250>;
-		};
-
-		tpu: pwm@e60f0000 {
-			compatible = "renesas,tpu-r8a7742", "renesas,tpu";
-			reg = <0 0xe60f0000 0 0x148>;
-			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 304>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 304>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		cpg: clock-controller@e6150000 {
-			compatible = "renesas,r8a7742-cpg-mssr";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>, <&usb_extal_clk>;
-			clock-names = "extal", "usb_extal";
-			#clock-cells = <2>;
-			#power-domain-cells = <0>;
-			#reset-cells = <1>;
-		};
-
-		apmu@e6151000 {
-			compatible = "renesas,r8a7742-apmu", "renesas,apmu";
-			reg = <0 0xe6151000 0 0x188>;
-			cpus = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
-		};
-
-		apmu@e6152000 {
-			compatible = "renesas,r8a7742-apmu", "renesas,apmu";
-			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-		};
-
-		rst: reset-controller@e6160000 {
-			compatible = "renesas,r8a7742-rst";
-			reg = <0 0xe6160000 0 0x0100>;
-		};
-
-		sysc: system-controller@e6180000 {
-			compatible = "renesas,r8a7742-sysc";
-			reg = <0 0xe6180000 0 0x0200>;
-			#power-domain-cells = <1>;
-		};
-
-		irqc: interrupt-controller@e61c0000 {
-			compatible = "renesas,irqc-r8a7742", "renesas,irqc";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 407>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 407>;
-		};
-
-		thermal: thermal@e61f0000 {
-			compatible = "renesas,thermal-r8a7742",
-				     "renesas,rcar-gen2-thermal";
-			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 522>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 522>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		ipmmu_sy0: iommu@e6280000 {
-			compatible = "renesas,ipmmu-r8a7742",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6280000 0 0x1000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_sy1: iommu@e6290000 {
-			compatible = "renesas,ipmmu-r8a7742",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6290000 0 0x1000>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_ds: iommu@e6740000 {
-			compatible = "renesas,ipmmu-r8a7742",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6740000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mp: iommu@ec680000 {
-			compatible = "renesas,ipmmu-r8a7742",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xec680000 0 0x1000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mx: iommu@fe951000 {
-			compatible = "renesas,ipmmu-r8a7742",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xfe951000 0 0x1000>;
-			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		icram0: sram@e63a0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63a0000 0 0x12000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63a0000 0x12000>;
-		};
-
-		icram1: sram@e63c0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63c0000 0 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63c0000 0x1000>;
-
-			smp-sram@0 {
-				compatible = "renesas,smp-sram";
-				reg = <0 0x100>;
-			};
-		};
-
-		icram2: sram@e6300000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe6300000 0 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe6300000 0x40000>;
-		};
-
-		i2c0: i2c@e6508000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7742",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6508000 0 0x40>;
-			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 931>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 931>;
-			i2c-scl-internal-delay-ns = <110>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@e6518000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7742",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6518000 0 0x40>;
-			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 930>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 930>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@e6530000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7742",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6530000 0 0x40>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 929>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 929>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@e6540000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7742",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6540000 0 0x40>;
-			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 928>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 928>;
-			i2c-scl-internal-delay-ns = <110>;
-			status = "disabled";
-		};
-
-		iic0: i2c@e6500000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7742",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6500000 0 0x425>;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 318>;
-			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
-			       <&dmac1 0x61>, <&dmac1 0x62>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 318>;
-			status = "disabled";
-		};
-
-		iic1: i2c@e6510000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7742",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6510000 0 0x425>;
-			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 323>;
-			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
-			       <&dmac1 0x65>, <&dmac1 0x66>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 323>;
-			status = "disabled";
-		};
-
-		iic2: i2c@e6520000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7742",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6520000 0 0x425>;
-			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 300>;
-			dmas = <&dmac0 0x69>, <&dmac0 0x6a>,
-			       <&dmac1 0x69>, <&dmac1 0x6a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 300>;
-			status = "disabled";
-		};
-
-		iic3: i2c@e60b0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7742",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe60b0000 0 0x425>;
-			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 926>;
-			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
-			       <&dmac1 0x77>, <&dmac1 0x78>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 926>;
-			status = "disabled";
-		};
-
-		hsusb: usb@e6590000 {
-			compatible = "renesas,usbhs-r8a7742",
-				     "renesas,rcar-gen2-usbhs";
-			reg = <0 0xe6590000 0 0x100>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 704>;
-			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
-			       <&usb_dmac1 0>, <&usb_dmac1 1>;
-			dma-names = "ch0", "ch1", "ch2", "ch3";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			renesas,buswait = <4>;
-			phys = <&usb0 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		usbphy: usb-phy-controller@e6590100 {
-			compatible = "renesas,usb-phy-r8a7742",
-				     "renesas,rcar-gen2-usb-phy";
-			reg = <0 0xe6590100 0 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cpg CPG_MOD 704>;
-			clock-names = "usbhs";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			status = "disabled";
-
-			usb0: usb-phy@0 {
-				reg = <0>;
-				#phy-cells = <1>;
-			};
-			usb2: usb-phy@2 {
-				reg = <2>;
-				#phy-cells = <1>;
-			};
-		};
-
-		usb_dmac0: dma-controller@e65a0000 {
-			compatible = "renesas,r8a7742-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 330>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 330>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		usb_dmac1: dma-controller@e65b0000 {
-			compatible = "renesas,r8a7742-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 331>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 331>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		dmac0: dma-controller@e6700000 {
-			compatible = "renesas,dmac-r8a7742",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 219>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 219>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		dmac1: dma-controller@e6720000 {
-			compatible = "renesas,dmac-r8a7742",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 218>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 218>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		avb: ethernet@e6800000 {
-			compatible = "renesas,etheravb-r8a7742",
-				     "renesas,etheravb-rcar-gen2";
-			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
-			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 812>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 812>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		qspi: spi@e6b10000 {
-			compatible = "renesas,qspi-r8a7742", "renesas,qspi";
-			reg = <0 0xe6b10000 0 0x2c>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 917>;
-			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
-			       <&dmac1 0x17>, <&dmac1 0x18>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 917>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		scifa0: serial@e6c40000 {
-			compatible = "renesas,scifa-r8a7742",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c40000 0 0x40>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 204>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
-			       <&dmac1 0x21>, <&dmac1 0x22>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 204>;
-			status = "disabled";
-		};
-
-		scifa1: serial@e6c50000 {
-			compatible = "renesas,scifa-r8a7742",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c50000 0 0x40>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 203>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
-			       <&dmac1 0x25>, <&dmac1 0x26>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 203>;
-			status = "disabled";
-		};
-
-		scifa2: serial@e6c60000 {
-			compatible = "renesas,scifa-r8a7742",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c60000 0 0x40>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 202>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
-			       <&dmac1 0x27>, <&dmac1 0x28>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 202>;
-			status = "disabled";
-		};
-
-		scifb0: serial@e6c20000 {
-			compatible = "renesas,scifb-r8a7742",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c20000 0 0x100>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 206>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
-			       <&dmac1 0x3d>, <&dmac1 0x3e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 206>;
-			status = "disabled";
-		};
-
-		scifb1: serial@e6c30000 {
-			compatible = "renesas,scifb-r8a7742",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c30000 0 0x100>;
-			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 207>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
-			       <&dmac1 0x19>, <&dmac1 0x1a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 207>;
-			status = "disabled";
-		};
-
-		scifb2: serial@e6ce0000 {
-			compatible = "renesas,scifb-r8a7742",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6ce0000 0 0x100>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 216>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
-			       <&dmac1 0x1d>, <&dmac1 0x1e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 216>;
-			status = "disabled";
-		};
-
-		scif0: serial@e6e60000 {
-			compatible = "renesas,scif-r8a7742",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e60000 0 0x40>;
-			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 721>,
-				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
-			       <&dmac1 0x29>, <&dmac1 0x2a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 721>;
-			status = "disabled";
-		};
-
-		scif1: serial@e6e68000 {
-			compatible = "renesas,scif-r8a7742",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e68000 0 0x40>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 720>,
-				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
-			       <&dmac1 0x2d>, <&dmac1 0x2e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 720>;
-			status = "disabled";
-		};
-
-		scif2: serial@e6e56000 {
-			compatible = "renesas,scif-r8a7742",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e56000 0 0x40>;
-			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 310>,
-				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
-			       <&dmac1 0x2b>, <&dmac1 0x2c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 310>;
-			status = "disabled";
-		};
-
-		hscif0: serial@e62c0000 {
-			compatible = "renesas,hscif-r8a7742",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c0000 0 0x60>;
-			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 717>,
-				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
-			       <&dmac1 0x39>, <&dmac1 0x3a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 717>;
-			status = "disabled";
-		};
-
-		hscif1: serial@e62c8000 {
-			compatible = "renesas,hscif-r8a7742",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c8000 0 0x60>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 716>,
-				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
-			       <&dmac1 0x4d>, <&dmac1 0x4e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 716>;
-			status = "disabled";
-		};
-
-		msiof0: spi@e6e20000 {
-			compatible = "renesas,msiof-r8a7742",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e20000 0 0x0064>;
-			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 0>;
-			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
-			       <&dmac1 0x51>, <&dmac1 0x52>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		msiof1: spi@e6e10000 {
-			compatible = "renesas,msiof-r8a7742",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e10000 0 0x0064>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 208>;
-			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
-			       <&dmac1 0x55>, <&dmac1 0x56>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 208>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		msiof2: spi@e6e00000 {
-			compatible = "renesas,msiof-r8a7742",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e00000 0 0x0064>;
-			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 205>;
-			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
-			       <&dmac1 0x41>, <&dmac1 0x42>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 205>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		msiof3: spi@e6c90000 {
-			compatible = "renesas,msiof-r8a7742",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6c90000 0 0x0064>;
-			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 215>;
-			dmas = <&dmac0 0x45>, <&dmac0 0x46>,
-			       <&dmac1 0x45>, <&dmac1 0x46>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 215>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		can0: can@e6e80000 {
-			compatible = "renesas,can-r8a7742",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e80000 0 0x1000>;
-			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 916>,
-				 <&cpg CPG_CORE R8A7742_CLK_RCAN>, <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 916>;
-			status = "disabled";
-		};
-
-		can1: can@e6e88000 {
-			compatible = "renesas,can-r8a7742",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e88000 0 0x1000>;
-			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 915>,
-				 <&cpg CPG_CORE R8A7742_CLK_RCAN>, <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 915>;
-			status = "disabled";
-		};
-
-		pwm0: pwm@e6e30000 {
-			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
-			reg = <0 0xe6e30000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm1: pwm@e6e31000 {
-			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
-			reg = <0 0xe6e31000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm2: pwm@e6e32000 {
-			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
-			reg = <0 0xe6e32000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm3: pwm@e6e33000 {
-			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
-			reg = <0 0xe6e33000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm4: pwm@e6e34000 {
-			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
-			reg = <0 0xe6e34000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm5: pwm@e6e35000 {
-			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
-			reg = <0 0xe6e35000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm6: pwm@e6e36000 {
-			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
-			reg = <0 0xe6e36000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		vin0: video@e6ef0000 {
-			compatible = "renesas,vin-r8a7742",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef0000 0 0x1000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 811>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 811>;
-			status = "disabled";
-		};
-
-		vin1: video@e6ef1000 {
-			compatible = "renesas,vin-r8a7742",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef1000 0 0x1000>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 810>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 810>;
-			status = "disabled";
-		};
-
-		vin2: video@e6ef2000 {
-			compatible = "renesas,vin-r8a7742",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef2000 0 0x1000>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 809>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 809>;
-			status = "disabled";
-		};
-
-		vin3: video@e6ef3000 {
-			compatible = "renesas,vin-r8a7742",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef3000 0 0x1000>;
-			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 808>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 808>;
-			status = "disabled";
-		};
-
-		rcar_sound: sound@ec500000 {
-			/*
-			 * #sound-dai-cells is required if simple-card
-			 *
-			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
-			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
-			 */
-			compatible = "renesas,rcar_sound-r8a7742",
-				     "renesas,rcar_sound-gen2";
-			reg = <0 0xec500000 0 0x1000>, /* SCU */
-			      <0 0xec5a0000 0 0x100>,  /* ADG */
-			      <0 0xec540000 0 0x1000>, /* SSIU */
-			      <0 0xec541000 0 0x280>,  /* SSI */
-			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
-			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
-			clocks = <&cpg CPG_MOD 1005>,
-				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
-				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
-				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
-				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
-				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
-				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
-				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
-				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
-				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
-				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
-				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A7742_CLK_M2>;
-			clock-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
-				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
-				      "ssi.1", "ssi.0",
-				      "src.9", "src.8", "src.7", "src.6",
-				      "src.5", "src.4", "src.3", "src.2",
-				      "src.1", "src.0",
-				      "ctu.0", "ctu.1",
-				      "mix.0", "mix.1",
-				      "dvc.0", "dvc.1",
-				      "clk_a", "clk_b", "clk_c", "clk_i";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 1005>,
-				 <&cpg 1006>, <&cpg 1007>,
-				 <&cpg 1008>, <&cpg 1009>,
-				 <&cpg 1010>, <&cpg 1011>,
-				 <&cpg 1012>, <&cpg 1013>,
-				 <&cpg 1014>, <&cpg 1015>;
-			reset-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
-				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
-				      "ssi.1", "ssi.0";
-
-			status = "disabled";
-
-			rcar_sound,dvc {
-				dvc0: dvc-0 {
-					dmas = <&audma1 0xbc>;
-					dma-names = "tx";
-				};
-				dvc1: dvc-1 {
-					dmas = <&audma1 0xbe>;
-					dma-names = "tx";
-				};
-			};
-
-			rcar_sound,mix {
-				mix0: mix-0 { };
-				mix1: mix-1 { };
-			};
-
-			rcar_sound,ctu {
-				ctu00: ctu-0 { };
-				ctu01: ctu-1 { };
-				ctu02: ctu-2 { };
-				ctu03: ctu-3 { };
-				ctu10: ctu-4 { };
-				ctu11: ctu-5 { };
-				ctu12: ctu-6 { };
-				ctu13: ctu-7 { };
-			};
-
-			rcar_sound,src {
-				src0: src-0 {
-					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x85>, <&audma1 0x9a>;
-					dma-names = "rx", "tx";
-				};
-				src1: src-1 {
-					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x87>, <&audma1 0x9c>;
-					dma-names = "rx", "tx";
-				};
-				src2: src-2 {
-					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x89>, <&audma1 0x9e>;
-					dma-names = "rx", "tx";
-				};
-				src3: src-3 {
-					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
-					dma-names = "rx", "tx";
-				};
-				src4: src-4 {
-					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
-					dma-names = "rx", "tx";
-				};
-				src5: src-5 {
-					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
-					dma-names = "rx", "tx";
-				};
-				src6: src-6 {
-					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x91>, <&audma1 0xb4>;
-					dma-names = "rx", "tx";
-				};
-				src7: src-7 {
-					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x93>, <&audma1 0xb6>;
-					dma-names = "rx", "tx";
-				};
-				src8: src-8 {
-					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x95>, <&audma1 0xb8>;
-					dma-names = "rx", "tx";
-				};
-				src9: src-9 {
-					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x97>, <&audma1 0xba>;
-					dma-names = "rx", "tx";
-				};
-			};
-
-			rcar_sound,ssi {
-				ssi0: ssi-0 {
-					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x01>, <&audma1 0x02>,
-					       <&audma0 0x15>, <&audma1 0x16>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi1: ssi-1 {
-					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x03>, <&audma1 0x04>,
-					       <&audma0 0x49>, <&audma1 0x4a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi2: ssi-2 {
-					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x05>, <&audma1 0x06>,
-					       <&audma0 0x63>, <&audma1 0x64>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi3: ssi-3 {
-					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x07>, <&audma1 0x08>,
-					       <&audma0 0x6f>, <&audma1 0x70>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi4: ssi-4 {
-					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x09>, <&audma1 0x0a>,
-					       <&audma0 0x71>, <&audma1 0x72>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi5: ssi-5 {
-					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0b>, <&audma1 0x0c>,
-					       <&audma0 0x73>, <&audma1 0x74>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi6: ssi-6 {
-					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0d>, <&audma1 0x0e>,
-					       <&audma0 0x75>, <&audma1 0x76>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi7: ssi-7 {
-					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0f>, <&audma1 0x10>,
-					       <&audma0 0x79>, <&audma1 0x7a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi8: ssi-8 {
-					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x11>, <&audma1 0x12>,
-					       <&audma0 0x7b>, <&audma1 0x7c>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi9: ssi-9 {
-					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x13>, <&audma1 0x14>,
-					       <&audma0 0x7d>, <&audma1 0x7e>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-			};
-		};
-
-		audma0: dma-controller@ec700000 {
-			compatible = "renesas,dmac-r8a7742",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 502>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 502>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		audma1: dma-controller@ec720000 {
-			compatible = "renesas,dmac-r8a7742",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 501>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 501>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		xhci: usb@ee000000 {
-			compatible = "renesas,xhci-r8a7742",
-				     "renesas,rcar-gen2-xhci";
-			reg = <0 0xee000000 0 0xc00>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 328>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 328>;
-			phys = <&usb2 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		pci0: pci@ee090000 {
-			compatible = "renesas,pci-r8a7742",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee090000 0 0xc00>,
-			      <0 0xee080000 0 0x1100>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x800 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x1000 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-		};
-
-		pci1: pci@ee0b0000 {
-			compatible = "renesas,pci-r8a7742",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee0b0000 0 0xc00>,
-			      <0 0xee0a0000 0 0x1100>;
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <1 1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pci2: pci@ee0d0000 {
-			compatible = "renesas,pci-r8a7742",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			reg = <0 0xee0d0000 0 0xc00>,
-			      <0 0xee0c0000 0 0x1100>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-
-			bus-range = <2 2>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x20800 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x21000 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-		};
-
-		sdhi0: mmc@ee100000 {
-			compatible = "renesas,sdhi-r8a7742",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee100000 0 0x328>;
-			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
-			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
-			       <&dmac1 0xcd>, <&dmac1 0xce>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <195000000>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 314>;
-			status = "disabled";
-		};
-
-		sdhi1: mmc@ee120000 {
-			compatible = "renesas,sdhi-r8a7742",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee120000 0 0x328>;
-			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 313>;
-			dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
-			       <&dmac1 0xc9>, <&dmac1 0xca>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <195000000>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 313>;
-			status = "disabled";
-		};
-
-		sdhi2: mmc@ee140000 {
-			compatible = "renesas,sdhi-r8a7742",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee140000 0 0x100>;
-			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
-			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
-			       <&dmac1 0xc1>, <&dmac1 0xc2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 312>;
-			status = "disabled";
-		};
-
-		sdhi3: mmc@ee160000 {
-			compatible = "renesas,sdhi-r8a7742",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee160000 0 0x100>;
-			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
-			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
-			       <&dmac1 0xd3>, <&dmac1 0xd4>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 311>;
-			status = "disabled";
-		};
-
-		mmcif0: mmc@ee200000 {
-			compatible = "renesas,mmcif-r8a7742",
-				     "renesas,sh-mmcif";
-			reg = <0 0xee200000 0 0x80>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 315>;
-			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
-			       <&dmac1 0xd1>, <&dmac1 0xd2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 315>;
-			reg-io-width = <4>;
-			status = "disabled";
-			max-frequency = <97500000>;
-		};
-
-		mmcif1: mmc@ee220000 {
-			compatible = "renesas,mmcif-r8a7742",
-				     "renesas,sh-mmcif";
-			reg = <0 0xee220000 0 0x80>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 305>;
-			dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
-			       <&dmac1 0xe1>, <&dmac1 0xe2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 305>;
-			reg-io-width = <4>;
-			status = "disabled";
-			max-frequency = <97500000>;
-		};
-
-		sata0: sata@ee300000 {
-			compatible = "renesas,sata-r8a7742",
-				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee300000 0 0x200000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 815>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 815>;
-			status = "disabled";
-		};
-
-		sata1: sata@ee500000 {
-			compatible = "renesas,sata-r8a7742",
-				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee500000 0 0x200000>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 814>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 814>;
-			status = "disabled";
-		};
-
-		ether: ethernet@ee700000 {
-			compatible = "renesas,ether-r8a7742",
-				     "renesas,rcar-gen2-ether";
-			reg = <0 0xee700000 0 0x400>;
-			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 813>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 813>;
-			phy-mode = "rmii";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@f1001000 {
-			compatible = "arm,gic-400";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
-			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&cpg CPG_MOD 408>;
-			clock-names = "clk";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 408>;
-		};
-
-		pciec: pcie@fe000000 {
-			compatible = "renesas,pcie-r8a7742",
-				     "renesas,pcie-rcar-gen2";
-			reg = <0 0xfe000000 0 0x80000>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			bus-range = <0x00 0xff>;
-			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
-				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
-				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
-				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
-			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
-				     <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
-			clock-names = "pcie", "pcie_bus";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 319>;
-			status = "disabled";
-		};
-
-		vsp@fe920000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe920000 0 0x8000>;
-			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 130>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 130>;
-		};
-
-		vsp@fe928000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe928000 0 0x8000>;
-			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 131>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 131>;
-		};
-
-		vsp@fe930000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe930000 0 0x8000>;
-			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 128>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 128>;
-		};
-
-		vsp@fe938000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe938000 0 0x8000>;
-			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 127>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 127>;
-		};
-
-		du: display@feb00000 {
-			compatible = "renesas,du-r8a7742";
-			reg = <0 0xfeb00000 0 0x70000>;
-			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
-				 <&cpg CPG_MOD 722>;
-			clock-names = "du.0", "du.1", "du.2";
-			resets = <&cpg 724>;
-			reset-names = "du.0";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					du_out_rgb: endpoint {
-					};
-				};
-				port@1 {
-					reg = <1>;
-					du_out_lvds0: endpoint {
-						remote-endpoint = <&lvds0_in>;
-					};
-				};
-				port@2 {
-					reg = <2>;
-					du_out_lvds1: endpoint {
-						remote-endpoint = <&lvds1_in>;
-					};
-				};
-			};
-		};
-
-		lvds0: lvds@feb90000 {
-			compatible = "renesas,r8a7742-lvds";
-			reg = <0 0xfeb90000 0 0x14>;
-			clocks = <&cpg CPG_MOD 726>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 726>;
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					lvds0_in: endpoint {
-						remote-endpoint = <&du_out_lvds0>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					lvds0_out: endpoint {
-					};
-				};
-			};
-		};
-
-		lvds1: lvds@feb94000 {
-			compatible = "renesas,r8a7742-lvds";
-			reg = <0 0xfeb94000 0 0x14>;
-			clocks = <&cpg CPG_MOD 725>;
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 725>;
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					lvds1_in: endpoint {
-						remote-endpoint = <&du_out_lvds1>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					lvds1_out: endpoint {
-					};
-				};
-			};
-		};
-
-		prr: chipid@ff000044 {
-			compatible = "renesas,prr";
-			reg = <0 0xff000044 0 4>;
-		};
-
-		cmt0: timer@ffca0000 {
-			compatible = "renesas,r8a7742-cmt0",
-				     "renesas,rcar-gen2-cmt0";
-			reg = <0 0xffca0000 0 0x1004>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 124>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 124>;
-			status = "disabled";
-		};
-
-		cmt1: timer@e6130000 {
-			compatible = "renesas,r8a7742-cmt1",
-				     "renesas,rcar-gen2-cmt1";
-			reg = <0 0xe6130000 0 0x1004>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 329>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
-			resets = <&cpg 329>;
-			status = "disabled";
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	/* External USB clock - can be overridden by the board */
-	usb_extal_clk: usb_extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <48000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
deleted file mode 100644
index 0d006aea99da1..0000000000000
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave-RZ/G1M Qseven board + camera daughter board
- *
- * Copyright (C) 2017 Renesas Electronics Corp.
- */
-
-/dts-v1/;
-#include "r8a7743-iwg20m.dtsi"
-#include "iwg20d-q7-common.dtsi"
-#include "iwg20d-q7-dbcm-ca.dtsi"
-
-/ {
-	model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board";
-	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
-};
-
-&pciec {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
deleted file mode 100644
index 498e223a5f93b..0000000000000
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave-RZ/G1M Qseven board
- *
- * Copyright (C) 2017 Renesas Electronics Corp.
- */
-
-/dts-v1/;
-#include "r8a7743-iwg20m.dtsi"
-#include "iwg20d-q7-common.dtsi"
-
-/ {
-	model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M";
-	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
-};
-
-&pciec {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
deleted file mode 100644
index b3fee1d61c87d..0000000000000
--- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave-RZG1M-20M Qseven SOM
- *
- * Copyright (C) 2017 Renesas Electronics Corp.
- */
-
-#include "r8a7743.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "iwave,g20m", "renesas,r8a7743";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x20000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x20000000>;
-	};
-
-	reg_3p3v: 3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	mmcif0_pins: mmc {
-		groups = "mmc_data8_b", "mmc_ctrl";
-		function = "mmc";
-	};
-
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data2";
-		function = "qspi";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <3300>;
-	};
-};
-
-&mmcif0 {
-	pinctrl-0 = <&mmcif0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	/* WARNING - This device contains the bootloader. Handle with care. */
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <1>;
-		m25p,fast-read;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
deleted file mode 100644
index ff274bfcb6646..0000000000000
--- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the SK-RZG1M board
- *
- * Copyright (C) 2016-2017 Cogent Embedded, Inc.
- */
-
-/dts-v1/;
-#include "r8a7743.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "SK-RZG1M";
-	compatible = "renesas,sk-rzg1m", "renesas,r8a7743";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	scif0_pins: scif0 {
-		groups = "scif0_data_d";
-		function = "scif0";
-	};
-
-	ether_pins: ether {
-		groups = "eth_link", "eth_mdio", "eth_rmii";
-		function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		groups = "intc_irq0";
-		function = "intc";
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0022.1537",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		interrupt-parent = <&irqc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
deleted file mode 100644
index 2245d19a23bb0..0000000000000
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ /dev/null
@@ -1,1799 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the r8a7743 SoC
- *
- * Copyright (C) 2016-2017 Cogent Embedded Inc.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/r8a7743-cpg-mssr.h>
-#include <dt-bindings/power/r8a7743-sysc.h>
-
-/ {
-	compatible = "renesas,r8a7743";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	/*
-	 * The external audio clocks are configured as 0 Hz fixed frequency
-	 * clocks by default.
-	 * Boards that provide audio clocks should override them.
-	 */
-	audio_clk_a: audio_clk_a {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	audio_clk_b: audio_clk_b {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	audio_clk_c: audio_clk_c {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	/* External CAN clock */
-	can_clk: can {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1500000000>;
-			clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
-			clock-latency = <300000>; /* 300 us */
-			power-domains = <&sysc R8A7743_PD_CA15_CPU0>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1500000 1000000>,
-					   <1312500 1000000>,
-					   <1125000 1000000>,
-					   < 937500 1000000>,
-					   < 750000 1000000>,
-					   < 375000 1000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1500000000>;
-			clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
-			clock-latency = <300000>; /* 300 us */
-			power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1500000 1000000>,
-					   <1312500 1000000>,
-					   <1125000 1000000>,
-					   < 937500 1000000>,
-					   < 750000 1000000>,
-					   < 375000 1000000>;
-		};
-
-		L2_CA15: cache-controller-0 {
-			compatible = "cache";
-			cache-unified;
-			cache-level = <2>;
-			power-domains = <&sysc R8A7743_PD_CA15_SCU>;
-		};
-	};
-
-	/* External root clock */
-	extal_clk: extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	/* External PCIe clock - can be overridden by the board */
-	pcie_bus_clk: pcie_bus {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	/* External SCIF clock */
-	scif_clk: scif {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		rwdt: watchdog@e6020000 {
-			compatible = "renesas,r8a7743-wdt",
-				     "renesas,rcar-gen2-wdt";
-			reg = <0 0xe6020000 0 0x0c>;
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 402>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 402>;
-			status = "disabled";
-		};
-
-		gpio0: gpio@e6050000 {
-			compatible = "renesas,gpio-r8a7743",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6050000 0 0x50>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 0 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 912>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 912>;
-		};
-
-		gpio1: gpio@e6051000 {
-			compatible = "renesas,gpio-r8a7743",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6051000 0 0x50>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 32 26>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 911>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 911>;
-		};
-
-		gpio2: gpio@e6052000 {
-			compatible = "renesas,gpio-r8a7743",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6052000 0 0x50>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 64 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 910>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 910>;
-		};
-
-		gpio3: gpio@e6053000 {
-			compatible = "renesas,gpio-r8a7743",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6053000 0 0x50>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 96 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 909>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 909>;
-		};
-
-		gpio4: gpio@e6054000 {
-			compatible = "renesas,gpio-r8a7743",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6054000 0 0x50>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 128 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 908>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 908>;
-		};
-
-		gpio5: gpio@e6055000 {
-			compatible = "renesas,gpio-r8a7743",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055000 0 0x50>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 160 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 907>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 907>;
-		};
-
-		gpio6: gpio@e6055400 {
-			compatible = "renesas,gpio-r8a7743",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055400 0 0x50>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 192 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 905>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 905>;
-		};
-
-		gpio7: gpio@e6055800 {
-			compatible = "renesas,gpio-r8a7743",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055800 0 0x50>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 224 26>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 904>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 904>;
-		};
-
-		pfc: pinctrl@e6060000 {
-			compatible = "renesas,pfc-r8a7743";
-			reg = <0 0xe6060000 0 0x250>;
-		};
-
-		tpu: pwm@e60f0000 {
-			compatible = "renesas,tpu-r8a7743", "renesas,tpu";
-			reg = <0 0xe60f0000 0 0x148>;
-			clocks = <&cpg CPG_MOD 304>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 304>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		cpg: clock-controller@e6150000 {
-			compatible = "renesas,r8a7743-cpg-mssr";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>, <&usb_extal_clk>;
-			clock-names = "extal", "usb_extal";
-			#clock-cells = <2>;
-			#power-domain-cells = <0>;
-			#reset-cells = <1>;
-		};
-
-		apmu@e6152000 {
-			compatible = "renesas,r8a7743-apmu", "renesas,apmu";
-			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0>, <&cpu1>;
-		};
-
-		rst: reset-controller@e6160000 {
-			compatible = "renesas,r8a7743-rst";
-			reg = <0 0xe6160000 0 0x100>;
-		};
-
-		sysc: system-controller@e6180000 {
-			compatible = "renesas,r8a7743-sysc";
-			reg = <0 0xe6180000 0 0x200>;
-			#power-domain-cells = <1>;
-		};
-
-		irqc: interrupt-controller@e61c0000 {
-			compatible = "renesas,irqc-r8a7743", "renesas,irqc";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 407>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 407>;
-		};
-
-		thermal: thermal@e61f0000 {
-			compatible = "renesas,thermal-r8a7743",
-				     "renesas,rcar-gen2-thermal";
-			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 522>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 522>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		ipmmu_sy0: iommu@e6280000 {
-			compatible = "renesas,ipmmu-r8a7743",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6280000 0 0x1000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_sy1: iommu@e6290000 {
-			compatible = "renesas,ipmmu-r8a7743",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6290000 0 0x1000>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_ds: iommu@e6740000 {
-			compatible = "renesas,ipmmu-r8a7743",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6740000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mp: iommu@ec680000 {
-			compatible = "renesas,ipmmu-r8a7743",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xec680000 0 0x1000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mx: iommu@fe951000 {
-			compatible = "renesas,ipmmu-r8a7743",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xfe951000 0 0x1000>;
-			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_gp: iommu@e62a0000 {
-			compatible = "renesas,ipmmu-r8a7743",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe62a0000 0 0x1000>;
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		icram0:	sram@e63a0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63a0000 0 0x12000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63a0000 0x12000>;
-		};
-
-		icram1:	sram@e63c0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63c0000 0 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63c0000 0x1000>;
-
-			smp-sram@0 {
-				compatible = "renesas,smp-sram";
-				reg = <0 0x100>;
-			};
-		};
-
-		icram2:	sram@e6300000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe6300000 0 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe6300000 0x40000>;
-		};
-
-		/* The memory map in the User's Manual maps the cores to
-		 * bus numbers
-		 */
-		i2c0: i2c@e6508000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7743",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6508000 0 0x40>;
-			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 931>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 931>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@e6518000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7743",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6518000 0 0x40>;
-			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 930>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 930>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@e6530000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7743",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6530000 0 0x40>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 929>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 929>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@e6540000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7743",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6540000 0 0x40>;
-			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 928>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 928>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c4: i2c@e6520000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7743",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6520000 0 0x40>;
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 927>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 927>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c5: i2c@e6528000 {
-			/* doesn't need pinmux */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7743",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6528000 0 0x40>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 925>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 925>;
-			i2c-scl-internal-delay-ns = <110>;
-			status = "disabled";
-		};
-
-		iic0: i2c@e6500000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7743",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6500000 0 0x425>;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 318>;
-			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
-			       <&dmac1 0x61>, <&dmac1 0x62>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 318>;
-			status = "disabled";
-		};
-
-		iic1: i2c@e6510000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7743",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6510000 0 0x425>;
-			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 323>;
-			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
-			       <&dmac1 0x65>, <&dmac1 0x66>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 323>;
-			status = "disabled";
-		};
-
-		iic3: i2c@e60b0000 {
-			/* doesn't need pinmux */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7743",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe60b0000 0 0x425>;
-			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 926>;
-			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
-			       <&dmac1 0x77>, <&dmac1 0x78>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 926>;
-			status = "disabled";
-		};
-
-		hsusb: usb@e6590000 {
-			compatible = "renesas,usbhs-r8a7743",
-				     "renesas,rcar-gen2-usbhs";
-			reg = <0 0xe6590000 0 0x100>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 704>;
-			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
-			       <&usb_dmac1 0>, <&usb_dmac1 1>;
-			dma-names = "ch0", "ch1", "ch2", "ch3";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			renesas,buswait = <4>;
-			phys = <&usb0 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		usbphy: usb-phy-controller@e6590100 {
-			compatible = "renesas,usb-phy-r8a7743",
-				     "renesas,rcar-gen2-usb-phy";
-			reg = <0 0xe6590100 0 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cpg CPG_MOD 704>;
-			clock-names = "usbhs";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			status = "disabled";
-
-			usb0: usb-phy@0 {
-				reg = <0>;
-				#phy-cells = <1>;
-			};
-			usb2: usb-phy@2 {
-				reg = <2>;
-				#phy-cells = <1>;
-			};
-		};
-
-		usb_dmac0: dma-controller@e65a0000 {
-			compatible = "renesas,r8a7743-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 330>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 330>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		usb_dmac1: dma-controller@e65b0000 {
-			compatible = "renesas,r8a7743-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 331>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 331>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		dmac0: dma-controller@e6700000 {
-			compatible = "renesas,dmac-r8a7743",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 219>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 219>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		dmac1: dma-controller@e6720000 {
-			compatible = "renesas,dmac-r8a7743",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 218>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 218>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		avb: ethernet@e6800000 {
-			compatible = "renesas,etheravb-r8a7743",
-				     "renesas,etheravb-rcar-gen2";
-			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
-			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 812>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 812>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		qspi: spi@e6b10000 {
-			compatible = "renesas,qspi-r8a7743", "renesas,qspi";
-			reg = <0 0xe6b10000 0 0x2c>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 917>;
-			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
-			       <&dmac1 0x17>, <&dmac1 0x18>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 917>;
-			status = "disabled";
-		};
-
-		scifa0: serial@e6c40000 {
-			compatible = "renesas,scifa-r8a7743",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c40000 0 0x40>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 204>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
-			       <&dmac1 0x21>, <&dmac1 0x22>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 204>;
-			status = "disabled";
-		};
-
-		scifa1: serial@e6c50000 {
-			compatible = "renesas,scifa-r8a7743",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c50000 0 0x40>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 203>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
-			       <&dmac1 0x25>, <&dmac1 0x26>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 203>;
-			status = "disabled";
-		};
-
-		scifa2: serial@e6c60000 {
-			compatible = "renesas,scifa-r8a7743",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c60000 0 0x40>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 202>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
-			       <&dmac1 0x27>, <&dmac1 0x28>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 202>;
-			status = "disabled";
-		};
-
-		scifa3: serial@e6c70000 {
-			compatible = "renesas,scifa-r8a7743",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c70000 0 0x40>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1106>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
-			       <&dmac1 0x1b>, <&dmac1 0x1c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 1106>;
-			status = "disabled";
-		};
-
-		scifa4: serial@e6c78000 {
-			compatible = "renesas,scifa-r8a7743",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c78000 0 0x40>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1107>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
-			       <&dmac1 0x1f>, <&dmac1 0x20>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 1107>;
-			status = "disabled";
-		};
-
-		scifa5: serial@e6c80000 {
-			compatible = "renesas,scifa-r8a7743",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c80000 0 0x40>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1108>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
-			       <&dmac1 0x23>, <&dmac1 0x24>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 1108>;
-			status = "disabled";
-		};
-
-		scifb0: serial@e6c20000 {
-			compatible = "renesas,scifb-r8a7743",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c20000 0 0x100>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 206>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
-			       <&dmac1 0x3d>, <&dmac1 0x3e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 206>;
-			status = "disabled";
-		};
-
-		scifb1: serial@e6c30000 {
-			compatible = "renesas,scifb-r8a7743",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c30000 0 0x100>;
-			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 207>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
-			       <&dmac1 0x19>, <&dmac1 0x1a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 207>;
-			status = "disabled";
-		};
-
-		scifb2: serial@e6ce0000 {
-			compatible = "renesas,scifb-r8a7743",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6ce0000 0 0x100>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 216>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
-			       <&dmac1 0x1d>, <&dmac1 0x1e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 216>;
-			status = "disabled";
-		};
-
-		scif0: serial@e6e60000 {
-			compatible = "renesas,scif-r8a7743",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e60000 0 0x40>;
-			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 721>,
-				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
-			       <&dmac1 0x29>, <&dmac1 0x2a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 721>;
-			status = "disabled";
-		};
-
-		scif1: serial@e6e68000 {
-			compatible = "renesas,scif-r8a7743",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e68000 0 0x40>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 720>,
-				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
-			       <&dmac1 0x2d>, <&dmac1 0x2e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 720>;
-			status = "disabled";
-		};
-
-		scif2: serial@e6e58000 {
-			compatible = "renesas,scif-r8a7743",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e58000 0 0x40>;
-			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 719>,
-				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
-			       <&dmac1 0x2b>, <&dmac1 0x2c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 719>;
-			status = "disabled";
-		};
-
-		scif3: serial@e6ea8000 {
-			compatible = "renesas,scif-r8a7743",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ea8000 0 0x40>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 718>,
-				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
-			       <&dmac1 0x2f>, <&dmac1 0x30>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 718>;
-			status = "disabled";
-		};
-
-		scif4: serial@e6ee0000 {
-			compatible = "renesas,scif-r8a7743",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee0000 0 0x40>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 715>,
-				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
-			       <&dmac1 0xfb>, <&dmac1 0xfc>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 715>;
-			status = "disabled";
-		};
-
-		scif5: serial@e6ee8000 {
-			compatible = "renesas,scif-r8a7743",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee8000 0 0x40>;
-			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 714>,
-				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
-			       <&dmac1 0xfd>, <&dmac1 0xfe>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 714>;
-			status = "disabled";
-		};
-
-		hscif0: serial@e62c0000 {
-			compatible = "renesas,hscif-r8a7743",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c0000 0 0x60>;
-			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 717>,
-				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
-			       <&dmac1 0x39>, <&dmac1 0x3a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 717>;
-			status = "disabled";
-		};
-
-		hscif1: serial@e62c8000 {
-			compatible = "renesas,hscif-r8a7743",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c8000 0 0x60>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 716>,
-				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
-			       <&dmac1 0x4d>, <&dmac1 0x4e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 716>;
-			status = "disabled";
-		};
-
-		hscif2: serial@e62d0000 {
-			compatible = "renesas,hscif-r8a7743",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62d0000 0 0x60>;
-			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 713>,
-				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
-			       <&dmac1 0x3b>, <&dmac1 0x3c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 713>;
-			status = "disabled";
-		};
-
-		msiof0: spi@e6e20000 {
-			compatible = "renesas,msiof-r8a7743",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e20000 0 0x0064>;
-			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 000>;
-			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
-			       <&dmac1 0x51>, <&dmac1 0x52>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 000>;
-			status = "disabled";
-		};
-
-		msiof1: spi@e6e10000 {
-			compatible = "renesas,msiof-r8a7743",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e10000 0 0x0064>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 208>;
-			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
-			       <&dmac1 0x55>, <&dmac1 0x56>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 208>;
-			status = "disabled";
-		};
-
-		msiof2: spi@e6e00000 {
-			compatible = "renesas,msiof-r8a7743",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e00000 0 0x0064>;
-			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 205>;
-			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
-			       <&dmac1 0x41>, <&dmac1 0x42>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 205>;
-			status = "disabled";
-		};
-
-		pwm0: pwm@e6e30000 {
-			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
-			reg = <0 0xe6e30000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm1: pwm@e6e31000 {
-			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
-			reg = <0 0xe6e31000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm2: pwm@e6e32000 {
-			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
-			reg = <0 0xe6e32000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm3: pwm@e6e33000 {
-			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
-			reg = <0 0xe6e33000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm4: pwm@e6e34000 {
-			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
-			reg = <0 0xe6e34000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm5: pwm@e6e35000 {
-			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
-			reg = <0 0xe6e35000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm6: pwm@e6e36000 {
-			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
-			reg = <0 0xe6e36000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		can0: can@e6e80000 {
-			compatible = "renesas,can-r8a7743",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e80000 0 0x1000>;
-			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 916>,
-				 <&cpg CPG_CORE R8A7743_CLK_RCAN>,
-				 <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 916>;
-			status = "disabled";
-		};
-
-		can1: can@e6e88000 {
-			compatible = "renesas,can-r8a7743",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e88000 0 0x1000>;
-			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 915>,
-				 <&cpg CPG_CORE R8A7743_CLK_RCAN>,
-				 <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 915>;
-			status = "disabled";
-		};
-
-		vin0: video@e6ef0000 {
-			compatible = "renesas,vin-r8a7743",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef0000 0 0x1000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 811>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 811>;
-			status = "disabled";
-		};
-
-		vin1: video@e6ef1000 {
-			compatible = "renesas,vin-r8a7743",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef1000 0 0x1000>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 810>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 810>;
-			status = "disabled";
-		};
-
-		vin2: video@e6ef2000 {
-			compatible = "renesas,vin-r8a7743",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef2000 0 0x1000>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 809>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 809>;
-			status = "disabled";
-		};
-
-		rcar_sound: sound@ec500000 {
-			/*
-			 * #sound-dai-cells is required if simple-card
-			 *
-			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
-			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
-			 */
-			compatible = "renesas,rcar_sound-r8a7743",
-				     "renesas,rcar_sound-gen2";
-			reg = <0 0xec500000 0 0x1000>, /* SCU */
-			      <0 0xec5a0000 0 0x100>,  /* ADG */
-			      <0 0xec540000 0 0x1000>, /* SSIU */
-			      <0 0xec541000 0 0x280>,  /* SSI */
-			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
-			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
-			clocks = <&cpg CPG_MOD 1005>,
-				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
-				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
-				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
-				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
-				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
-				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
-				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
-				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
-				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
-				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
-				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A7743_CLK_M2>;
-			clock-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
-				      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
-				      "src.9", "src.8", "src.7", "src.6", "src.5",
-				      "src.4", "src.3", "src.2", "src.1", "src.0",
-				      "ctu.0", "ctu.1",
-				      "mix.0", "mix.1",
-				      "dvc.0", "dvc.1",
-				      "clk_a", "clk_b", "clk_c", "clk_i";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 1005>,
-				 <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
-				 <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
-				 <&cpg 1014>, <&cpg 1015>;
-			reset-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
-				      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
-			status = "disabled";
-
-			rcar_sound,dvc {
-				dvc0: dvc-0 {
-					dmas = <&audma1 0xbc>;
-					dma-names = "tx";
-				};
-				dvc1: dvc-1 {
-					dmas = <&audma1 0xbe>;
-					dma-names = "tx";
-				};
-			};
-
-			rcar_sound,mix {
-				mix0: mix-0 { };
-				mix1: mix-1 { };
-			};
-
-			rcar_sound,ctu {
-				ctu00: ctu-0 { };
-				ctu01: ctu-1 { };
-				ctu02: ctu-2 { };
-				ctu03: ctu-3 { };
-				ctu10: ctu-4 { };
-				ctu11: ctu-5 { };
-				ctu12: ctu-6 { };
-				ctu13: ctu-7 { };
-			};
-
-			rcar_sound,src {
-				src0: src-0 {
-					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x85>, <&audma1 0x9a>;
-					dma-names = "rx", "tx";
-				};
-				src1: src-1 {
-					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x87>, <&audma1 0x9c>;
-					dma-names = "rx", "tx";
-				};
-				src2: src-2 {
-					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x89>, <&audma1 0x9e>;
-					dma-names = "rx", "tx";
-				};
-				src3: src-3 {
-					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
-					dma-names = "rx", "tx";
-				};
-				src4: src-4 {
-					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
-					dma-names = "rx", "tx";
-				};
-				src5: src-5 {
-					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
-					dma-names = "rx", "tx";
-				};
-				src6: src-6 {
-					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x91>, <&audma1 0xb4>;
-					dma-names = "rx", "tx";
-				};
-				src7: src-7 {
-					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x93>, <&audma1 0xb6>;
-					dma-names = "rx", "tx";
-				};
-				src8: src-8 {
-					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x95>, <&audma1 0xb8>;
-					dma-names = "rx", "tx";
-				};
-				src9: src-9 {
-					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x97>, <&audma1 0xba>;
-					dma-names = "rx", "tx";
-				};
-			};
-
-			rcar_sound,ssi {
-				ssi0: ssi-0 {
-					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi1: ssi-1 {
-					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi2: ssi-2 {
-					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi3: ssi-3 {
-					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi4: ssi-4 {
-					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi5: ssi-5 {
-					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi6: ssi-6 {
-					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi7: ssi-7 {
-					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi8: ssi-8 {
-					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi9: ssi-9 {
-					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-			};
-		};
-
-		audma0: dma-controller@ec700000 {
-			compatible = "renesas,dmac-r8a7743",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 502>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 502>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		audma1: dma-controller@ec720000 {
-			compatible = "renesas,dmac-r8a7743",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 501>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 501>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		/*
-		 * pci1 and xhci share the same phy, therefore only one of them
-		 * can be active at any one time. If both of them are enabled,
-		 * a race condition will determine who'll control the phy.
-		 * A firmware file is needed by the xhci driver in order for
-		 * USB 3.0 to work properly.
-		 */
-		xhci: usb@ee000000 {
-			compatible = "renesas,xhci-r8a7743",
-				     "renesas,rcar-gen2-xhci";
-			reg = <0 0xee000000 0 0xc00>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 328>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 328>;
-			phys = <&usb2 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		pci0: pci@ee090000 {
-			compatible = "renesas,pci-r8a7743",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee090000 0 0xc00>,
-			      <0 0xee080000 0 0x1100>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x800 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x1000 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-		};
-
-		pci1: pci@ee0d0000 {
-			compatible = "renesas,pci-r8a7743",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee0d0000 0 0xc00>,
-			      <0 0xee0c0000 0 0x1100>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <1 1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x10800 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x11000 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-		};
-
-		sdhi0: mmc@ee100000 {
-			compatible = "renesas,sdhi-r8a7743",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee100000 0 0x328>;
-			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
-			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
-			       <&dmac1 0xcd>, <&dmac1 0xce>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <195000000>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 314>;
-			status = "disabled";
-		};
-
-		sdhi1: mmc@ee140000 {
-			compatible = "renesas,sdhi-r8a7743",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee140000 0 0x100>;
-			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
-			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
-			       <&dmac1 0xc1>, <&dmac1 0xc2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 312>;
-			status = "disabled";
-		};
-
-		sdhi2: mmc@ee160000 {
-			compatible = "renesas,sdhi-r8a7743",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee160000 0 0x100>;
-			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
-			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
-			       <&dmac1 0xd3>, <&dmac1 0xd4>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 311>;
-			status = "disabled";
-		};
-
-		mmcif0: mmc@ee200000 {
-			compatible = "renesas,mmcif-r8a7743",
-				     "renesas,sh-mmcif";
-			reg = <0 0xee200000 0 0x80>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 315>;
-			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
-			       <&dmac1 0xd1>, <&dmac1 0xd2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 315>;
-			reg-io-width = <4>;
-			max-frequency = <97500000>;
-			status = "disabled";
-		};
-
-		ether: ethernet@ee700000 {
-			compatible = "renesas,ether-r8a7743",
-				     "renesas,rcar-gen2-ether";
-			reg = <0 0xee700000 0 0x400>;
-			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 813>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 813>;
-			phy-mode = "rmii";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@f1001000 {
-			compatible = "arm,gic-400";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
-			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&cpg CPG_MOD 408>;
-			clock-names = "clk";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 408>;
-		};
-
-		pciec: pcie@fe000000 {
-			compatible = "renesas,pcie-r8a7743",
-				     "renesas,pcie-rcar-gen2";
-			reg = <0 0xfe000000 0 0x80000>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			bus-range = <0x00 0xff>;
-			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
-				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
-				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
-				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
-			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
-				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
-			clock-names = "pcie", "pcie_bus";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 319>;
-			status = "disabled";
-		};
-
-		vsp@fe928000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe928000 0 0x8000>;
-			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 131>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 131>;
-		};
-
-		vsp@fe930000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe930000 0 0x8000>;
-			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 128>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 128>;
-		};
-
-		vsp@fe938000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe938000 0 0x8000>;
-			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 127>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 127>;
-		};
-
-		du: display@feb00000 {
-			compatible = "renesas,du-r8a7743";
-			reg = <0 0xfeb00000 0 0x40000>;
-			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
-			clock-names = "du.0", "du.1";
-			resets = <&cpg 724>;
-			reset-names = "du.0";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					du_out_rgb: endpoint {
-					};
-				};
-				port@1 {
-					reg = <1>;
-					du_out_lvds0: endpoint {
-						remote-endpoint = <&lvds0_in>;
-					};
-				};
-			};
-		};
-
-		lvds0: lvds@feb90000 {
-			compatible = "renesas,r8a7743-lvds";
-			reg = <0 0xfeb90000 0 0x1c>;
-			clocks = <&cpg CPG_MOD 726>;
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 726>;
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					lvds0_in: endpoint {
-						remote-endpoint = <&du_out_lvds0>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					lvds0_out: endpoint {
-					};
-				};
-			};
-		};
-
-		prr: chipid@ff000044 {
-			compatible = "renesas,prr";
-			reg = <0 0xff000044 0 4>;
-		};
-
-		cmt0: timer@ffca0000 {
-			compatible = "renesas,r8a7743-cmt0",
-				     "renesas,rcar-gen2-cmt0";
-			reg = <0 0xffca0000 0 0x1004>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 124>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 124>;
-			status = "disabled";
-		};
-
-		cmt1: timer@e6130000 {
-			compatible = "renesas,r8a7743-cmt1",
-				     "renesas,rcar-gen2-cmt1";
-			reg = <0 0xe6130000 0 0x1004>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 329>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
-			resets = <&cpg 329>;
-			status = "disabled";
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	/* External USB clock - can be overridden by the board */
-	usb_extal_clk: usb_extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <48000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts
deleted file mode 100644
index 3e58c2e92e036..0000000000000
--- a/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave Systems RZ/G1N Qseven board development
- * platform with camera daughter board
- *
- * Copyright (C) 2018 Renesas Electronics Corp.
- */
-
-/dts-v1/;
-#include "r8a7744-iwg20m.dtsi"
-#include "iwg20d-q7-common.dtsi"
-#include "iwg20d-q7-dbcm-ca.dtsi"
-
-/ {
-	model = "iWave Systems RZ/G1N Qseven development platform with camera add-on";
-	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744";
-};
diff --git a/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts
deleted file mode 100644
index 1fdac528f274d..0000000000000
--- a/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave-RZ/G1N Qseven board
- *
- * Copyright (C) 2018 Renesas Electronics Corp.
- */
-
-/dts-v1/;
-#include "r8a7744-iwg20m.dtsi"
-#include "iwg20d-q7-common.dtsi"
-
-/ {
-	model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1N";
-	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744";
-};
diff --git a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
deleted file mode 100644
index 82ee3c1140efe..0000000000000
--- a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave RZ/G1N Qseven SOM
- *
- * Copyright (C) 2018 Renesas Electronics Corp.
- */
-
-#include "r8a7744.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "iwave,g20m", "renesas,r8a7744";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	reg_3p3v: 3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	mmcif0_pins: mmc {
-		groups = "mmc_data8_b", "mmc_ctrl";
-		function = "mmc";
-	};
-
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data2";
-		function = "qspi";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <3300>;
-	};
-};
-
-&mmcif0 {
-	pinctrl-0 = <&mmcif0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	/* WARNING - This device contains the bootloader. Handle with care. */
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		spi-tx-bus-width = <2>;
-		spi-rx-bus-width = <2>;
-		m25p,fast-read;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
deleted file mode 100644
index aa13841f97814..0000000000000
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ /dev/null
@@ -1,1785 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the r8a7744 SoC
- *
- * Copyright (C) 2018 Renesas Electronics Corp.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/r8a7744-cpg-mssr.h>
-#include <dt-bindings/power/r8a7744-sysc.h>
-
-/ {
-	compatible = "renesas,r8a7744";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	/*
-	 * The external audio clocks are configured as 0 Hz fixed frequency
-	 * clocks by default.
-	 * Boards that provide audio clocks should override them.
-	 */
-	audio_clk_a: audio_clk_a {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	audio_clk_b: audio_clk_b {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	audio_clk_c: audio_clk_c {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	/* External CAN clock */
-	can_clk: can {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1500000000>;
-			clocks = <&cpg CPG_CORE R8A7744_CLK_Z>;
-			clock-latency = <300000>; /* 300 us */
-			power-domains = <&sysc R8A7744_PD_CA15_CPU0>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1500000 1000000>,
-					   <1312500 1000000>,
-					   <1125000 1000000>,
-					   < 937500 1000000>,
-					   < 750000 1000000>,
-					   < 375000 1000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1500000000>;
-			clocks = <&cpg CPG_CORE R8A7744_CLK_Z>;
-			clock-latency = <300000>; /* 300 us */
-			power-domains = <&sysc R8A7744_PD_CA15_CPU1>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1500000 1000000>,
-					   <1312500 1000000>,
-					   <1125000 1000000>,
-					   < 937500 1000000>,
-					   < 750000 1000000>,
-					   < 375000 1000000>;
-		};
-
-		L2_CA15: cache-controller-0 {
-			compatible = "cache";
-			cache-unified;
-			cache-level = <2>;
-			power-domains = <&sysc R8A7744_PD_CA15_SCU>;
-		};
-	};
-
-	/* External root clock */
-	extal_clk: extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	/* External PCIe clock - can be overridden by the board */
-	pcie_bus_clk: pcie_bus {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	/* External SCIF clock */
-	scif_clk: scif {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		rwdt: watchdog@e6020000 {
-			compatible = "renesas,r8a7744-wdt",
-				     "renesas,rcar-gen2-wdt";
-			reg = <0 0xe6020000 0 0x0c>;
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 402>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 402>;
-			status = "disabled";
-		};
-
-		gpio0: gpio@e6050000 {
-			compatible = "renesas,gpio-r8a7744",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6050000 0 0x50>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 0 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 912>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 912>;
-		};
-
-		gpio1: gpio@e6051000 {
-			compatible = "renesas,gpio-r8a7744",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6051000 0 0x50>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 32 26>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 911>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 911>;
-		};
-
-		gpio2: gpio@e6052000 {
-			compatible = "renesas,gpio-r8a7744",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6052000 0 0x50>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 64 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 910>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 910>;
-		};
-
-		gpio3: gpio@e6053000 {
-			compatible = "renesas,gpio-r8a7744",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6053000 0 0x50>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 96 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 909>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 909>;
-		};
-
-		gpio4: gpio@e6054000 {
-			compatible = "renesas,gpio-r8a7744",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6054000 0 0x50>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 128 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 908>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 908>;
-		};
-
-		gpio5: gpio@e6055000 {
-			compatible = "renesas,gpio-r8a7744",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055000 0 0x50>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 160 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 907>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 907>;
-		};
-
-		gpio6: gpio@e6055400 {
-			compatible = "renesas,gpio-r8a7744",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055400 0 0x50>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 192 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 905>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 905>;
-		};
-
-		gpio7: gpio@e6055800 {
-			compatible = "renesas,gpio-r8a7744",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055800 0 0x50>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 224 26>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 904>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 904>;
-		};
-
-		pfc: pinctrl@e6060000 {
-			compatible = "renesas,pfc-r8a7744";
-			reg = <0 0xe6060000 0 0x250>;
-		};
-
-		tpu: pwm@e60f0000 {
-			compatible = "renesas,tpu-r8a7744", "renesas,tpu";
-			reg = <0 0xe60f0000 0 0x148>;
-			clocks = <&cpg CPG_MOD 304>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 304>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		cpg: clock-controller@e6150000 {
-			compatible = "renesas,r8a7744-cpg-mssr";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>, <&usb_extal_clk>;
-			clock-names = "extal", "usb_extal";
-			#clock-cells = <2>;
-			#power-domain-cells = <0>;
-			#reset-cells = <1>;
-		};
-
-		apmu@e6152000 {
-			compatible = "renesas,r8a7744-apmu", "renesas,apmu";
-			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0>, <&cpu1>;
-		};
-
-		rst: reset-controller@e6160000 {
-			compatible = "renesas,r8a7744-rst";
-			reg = <0 0xe6160000 0 0x100>;
-		};
-
-		sysc: system-controller@e6180000 {
-			compatible = "renesas,r8a7744-sysc";
-			reg = <0 0xe6180000 0 0x200>;
-			#power-domain-cells = <1>;
-		};
-
-		irqc: interrupt-controller@e61c0000 {
-			compatible = "renesas,irqc-r8a7744", "renesas,irqc";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 407>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 407>;
-		};
-
-		thermal: thermal@e61f0000 {
-			compatible = "renesas,thermal-r8a7744",
-				     "renesas,rcar-gen2-thermal";
-			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 522>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 522>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		ipmmu_sy0: iommu@e6280000 {
-			compatible = "renesas,ipmmu-r8a7744",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6280000 0 0x1000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_sy1: iommu@e6290000 {
-			compatible = "renesas,ipmmu-r8a7744",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6290000 0 0x1000>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_ds: iommu@e6740000 {
-			compatible = "renesas,ipmmu-r8a7744",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6740000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mp: iommu@ec680000 {
-			compatible = "renesas,ipmmu-r8a7744",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xec680000 0 0x1000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mx: iommu@fe951000 {
-			compatible = "renesas,ipmmu-r8a7744",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xfe951000 0 0x1000>;
-			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_gp: iommu@e62a0000 {
-			compatible = "renesas,ipmmu-r8a7744",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe62a0000 0 0x1000>;
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		icram0:	sram@e63a0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63a0000 0 0x12000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63a0000 0x12000>;
-		};
-
-		icram1:	sram@e63c0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63c0000 0 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63c0000 0x1000>;
-
-			smp-sram@0 {
-				compatible = "renesas,smp-sram";
-				reg = <0 0x100>;
-			};
-		};
-
-		icram2:	sram@e6300000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe6300000 0 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe6300000 0x40000>;
-		};
-
-		/* The memory map in the User's Manual maps the cores to
-		 * bus numbers
-		 */
-		i2c0: i2c@e6508000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7744",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6508000 0 0x40>;
-			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 931>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 931>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@e6518000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7744",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6518000 0 0x40>;
-			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 930>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 930>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@e6530000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7744",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6530000 0 0x40>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 929>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 929>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@e6540000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7744",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6540000 0 0x40>;
-			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 928>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 928>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c4: i2c@e6520000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7744",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6520000 0 0x40>;
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 927>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 927>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c5: i2c@e6528000 {
-			/* doesn't need pinmux */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7744",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6528000 0 0x40>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 925>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 925>;
-			i2c-scl-internal-delay-ns = <110>;
-			status = "disabled";
-		};
-
-		iic0: i2c@e6500000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7744",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6500000 0 0x425>;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 318>;
-			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
-			       <&dmac1 0x61>, <&dmac1 0x62>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 318>;
-			status = "disabled";
-		};
-
-		iic1: i2c@e6510000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7744",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6510000 0 0x425>;
-			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 323>;
-			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
-			       <&dmac1 0x65>, <&dmac1 0x66>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 323>;
-			status = "disabled";
-		};
-
-		iic3: i2c@e60b0000 {
-			/* doesn't need pinmux */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7744",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe60b0000 0 0x425>;
-			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 926>;
-			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
-			       <&dmac1 0x77>, <&dmac1 0x78>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 926>;
-			status = "disabled";
-		};
-
-		hsusb: usb@e6590000 {
-			compatible = "renesas,usbhs-r8a7744",
-				     "renesas,rcar-gen2-usbhs";
-			reg = <0 0xe6590000 0 0x100>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 704>;
-			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
-			       <&usb_dmac1 0>, <&usb_dmac1 1>;
-			dma-names = "ch0", "ch1", "ch2", "ch3";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			renesas,buswait = <4>;
-			phys = <&usb0 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		usbphy: usb-phy-controller@e6590100 {
-			compatible = "renesas,usb-phy-r8a7744",
-				     "renesas,rcar-gen2-usb-phy";
-			reg = <0 0xe6590100 0 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cpg CPG_MOD 704>;
-			clock-names = "usbhs";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			status = "disabled";
-
-			usb0: usb-phy@0 {
-				reg = <0>;
-				#phy-cells = <1>;
-			};
-			usb2: usb-phy@2 {
-				reg = <2>;
-				#phy-cells = <1>;
-			};
-		};
-
-		usb_dmac0: dma-controller@e65a0000 {
-			compatible = "renesas,r8a7744-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 330>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 330>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		usb_dmac1: dma-controller@e65b0000 {
-			compatible = "renesas,r8a7744-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 331>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 331>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		dmac0: dma-controller@e6700000 {
-			compatible = "renesas,dmac-r8a7744",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 219>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 219>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		dmac1: dma-controller@e6720000 {
-			compatible = "renesas,dmac-r8a7744",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 218>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 218>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		avb: ethernet@e6800000 {
-			compatible = "renesas,etheravb-r8a7744",
-				     "renesas,etheravb-rcar-gen2";
-			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
-			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 812>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 812>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		qspi: spi@e6b10000 {
-			compatible = "renesas,qspi-r8a7744", "renesas,qspi";
-			reg = <0 0xe6b10000 0 0x2c>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 917>;
-			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
-			       <&dmac1 0x17>, <&dmac1 0x18>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 917>;
-			status = "disabled";
-		};
-
-		scifa0: serial@e6c40000 {
-			compatible = "renesas,scifa-r8a7744",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c40000 0 0x40>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 204>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
-			       <&dmac1 0x21>, <&dmac1 0x22>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 204>;
-			status = "disabled";
-		};
-
-		scifa1: serial@e6c50000 {
-			compatible = "renesas,scifa-r8a7744",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c50000 0 0x40>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 203>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
-			       <&dmac1 0x25>, <&dmac1 0x26>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 203>;
-			status = "disabled";
-		};
-
-		scifa2: serial@e6c60000 {
-			compatible = "renesas,scifa-r8a7744",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c60000 0 0x40>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 202>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
-			       <&dmac1 0x27>, <&dmac1 0x28>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 202>;
-			status = "disabled";
-		};
-
-		scifa3: serial@e6c70000 {
-			compatible = "renesas,scifa-r8a7744",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c70000 0 0x40>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1106>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
-			       <&dmac1 0x1b>, <&dmac1 0x1c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 1106>;
-			status = "disabled";
-		};
-
-		scifa4: serial@e6c78000 {
-			compatible = "renesas,scifa-r8a7744",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c78000 0 0x40>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1107>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
-			       <&dmac1 0x1f>, <&dmac1 0x20>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 1107>;
-			status = "disabled";
-		};
-
-		scifa5: serial@e6c80000 {
-			compatible = "renesas,scifa-r8a7744",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c80000 0 0x40>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1108>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
-			       <&dmac1 0x23>, <&dmac1 0x24>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 1108>;
-			status = "disabled";
-		};
-
-		scifb0: serial@e6c20000 {
-			compatible = "renesas,scifb-r8a7744",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c20000 0 0x100>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 206>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
-			       <&dmac1 0x3d>, <&dmac1 0x3e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 206>;
-			status = "disabled";
-		};
-
-		scifb1: serial@e6c30000 {
-			compatible = "renesas,scifb-r8a7744",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c30000 0 0x100>;
-			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 207>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
-			       <&dmac1 0x19>, <&dmac1 0x1a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 207>;
-			status = "disabled";
-		};
-
-		scifb2: serial@e6ce0000 {
-			compatible = "renesas,scifb-r8a7744",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6ce0000 0 0x100>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 216>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
-			       <&dmac1 0x1d>, <&dmac1 0x1e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 216>;
-			status = "disabled";
-		};
-
-		scif0: serial@e6e60000 {
-			compatible = "renesas,scif-r8a7744",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e60000 0 0x40>;
-			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 721>,
-				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
-			       <&dmac1 0x29>, <&dmac1 0x2a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 721>;
-			status = "disabled";
-		};
-
-		scif1: serial@e6e68000 {
-			compatible = "renesas,scif-r8a7744",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e68000 0 0x40>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 720>,
-				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
-			       <&dmac1 0x2d>, <&dmac1 0x2e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 720>;
-			status = "disabled";
-		};
-
-		scif2: serial@e6e58000 {
-			compatible = "renesas,scif-r8a7744",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e58000 0 0x40>;
-			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 719>,
-				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
-			       <&dmac1 0x2b>, <&dmac1 0x2c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 719>;
-			status = "disabled";
-		};
-
-		scif3: serial@e6ea8000 {
-			compatible = "renesas,scif-r8a7744",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ea8000 0 0x40>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 718>,
-				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
-			       <&dmac1 0x2f>, <&dmac1 0x30>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 718>;
-			status = "disabled";
-		};
-
-		scif4: serial@e6ee0000 {
-			compatible = "renesas,scif-r8a7744",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee0000 0 0x40>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 715>,
-				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
-			       <&dmac1 0xfb>, <&dmac1 0xfc>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 715>;
-			status = "disabled";
-		};
-
-		scif5: serial@e6ee8000 {
-			compatible = "renesas,scif-r8a7744",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee8000 0 0x40>;
-			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 714>,
-				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
-			       <&dmac1 0xfd>, <&dmac1 0xfe>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 714>;
-			status = "disabled";
-		};
-
-		hscif0: serial@e62c0000 {
-			compatible = "renesas,hscif-r8a7744",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c0000 0 0x60>;
-			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 717>,
-				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
-			       <&dmac1 0x39>, <&dmac1 0x3a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 717>;
-			status = "disabled";
-		};
-
-		hscif1: serial@e62c8000 {
-			compatible = "renesas,hscif-r8a7744",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c8000 0 0x60>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 716>,
-				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
-			       <&dmac1 0x4d>, <&dmac1 0x4e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 716>;
-			status = "disabled";
-		};
-
-		hscif2: serial@e62d0000 {
-			compatible = "renesas,hscif-r8a7744",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62d0000 0 0x60>;
-			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 713>,
-				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
-			       <&dmac1 0x3b>, <&dmac1 0x3c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 713>;
-			status = "disabled";
-		};
-
-		msiof0: spi@e6e20000 {
-			compatible = "renesas,msiof-r8a7744",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e20000 0 0x0064>;
-			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 000>;
-			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
-			       <&dmac1 0x51>, <&dmac1 0x52>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 000>;
-			status = "disabled";
-		};
-
-		msiof1: spi@e6e10000 {
-			compatible = "renesas,msiof-r8a7744",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e10000 0 0x0064>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 208>;
-			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
-			       <&dmac1 0x55>, <&dmac1 0x56>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 208>;
-			status = "disabled";
-		};
-
-		msiof2: spi@e6e00000 {
-			compatible = "renesas,msiof-r8a7744",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e00000 0 0x0064>;
-			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 205>;
-			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
-			       <&dmac1 0x41>, <&dmac1 0x42>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 205>;
-			status = "disabled";
-		};
-
-		pwm0: pwm@e6e30000 {
-			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
-			reg = <0 0xe6e30000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm1: pwm@e6e31000 {
-			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
-			reg = <0 0xe6e31000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm2: pwm@e6e32000 {
-			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
-			reg = <0 0xe6e32000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm3: pwm@e6e33000 {
-			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
-			reg = <0 0xe6e33000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm4: pwm@e6e34000 {
-			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
-			reg = <0 0xe6e34000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm5: pwm@e6e35000 {
-			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
-			reg = <0 0xe6e35000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm6: pwm@e6e36000 {
-			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
-			reg = <0 0xe6e36000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		can0: can@e6e80000 {
-			compatible = "renesas,can-r8a7744",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e80000 0 0x1000>;
-			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 916>,
-				 <&cpg CPG_CORE R8A7744_CLK_RCAN>,
-				 <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 916>;
-			status = "disabled";
-		};
-
-		can1: can@e6e88000 {
-			compatible = "renesas,can-r8a7744",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e88000 0 0x1000>;
-			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 915>,
-				 <&cpg CPG_CORE R8A7744_CLK_RCAN>,
-				 <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 915>;
-			status = "disabled";
-		};
-
-		vin0: video@e6ef0000 {
-			compatible = "renesas,vin-r8a7744",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef0000 0 0x1000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 811>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 811>;
-			status = "disabled";
-		};
-
-		vin1: video@e6ef1000 {
-			compatible = "renesas,vin-r8a7744",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef1000 0 0x1000>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 810>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 810>;
-			status = "disabled";
-		};
-
-		vin2: video@e6ef2000 {
-			compatible = "renesas,vin-r8a7744",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef2000 0 0x1000>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 809>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 809>;
-			status = "disabled";
-		};
-
-		rcar_sound: sound@ec500000 {
-			/*
-			 * #sound-dai-cells is required if simple-card
-			 *
-			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
-			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
-			 */
-			compatible = "renesas,rcar_sound-r8a7744",
-				     "renesas,rcar_sound-gen2";
-			reg = <0 0xec500000 0 0x1000>, /* SCU */
-			      <0 0xec5a0000 0 0x100>,  /* ADG */
-			      <0 0xec540000 0 0x1000>, /* SSIU */
-			      <0 0xec541000 0 0x280>,  /* SSI */
-			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
-			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
-			clocks = <&cpg CPG_MOD 1005>,
-				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
-				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
-				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
-				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
-				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
-				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
-				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
-				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
-				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
-				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
-				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A7744_CLK_M2>;
-			clock-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
-				      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
-				      "src.9", "src.8", "src.7", "src.6", "src.5",
-				      "src.4", "src.3", "src.2", "src.1", "src.0",
-				      "ctu.0", "ctu.1",
-				      "mix.0", "mix.1",
-				      "dvc.0", "dvc.1",
-				      "clk_a", "clk_b", "clk_c", "clk_i";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 1005>,
-				 <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
-				 <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
-				 <&cpg 1014>, <&cpg 1015>;
-			reset-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
-				      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
-			status = "disabled";
-
-			rcar_sound,dvc {
-				dvc0: dvc-0 {
-					dmas = <&audma1 0xbc>;
-					dma-names = "tx";
-				};
-				dvc1: dvc-1 {
-					dmas = <&audma1 0xbe>;
-					dma-names = "tx";
-				};
-			};
-
-			rcar_sound,mix {
-				mix0: mix-0 { };
-				mix1: mix-1 { };
-			};
-
-			rcar_sound,ctu {
-				ctu00: ctu-0 { };
-				ctu01: ctu-1 { };
-				ctu02: ctu-2 { };
-				ctu03: ctu-3 { };
-				ctu10: ctu-4 { };
-				ctu11: ctu-5 { };
-				ctu12: ctu-6 { };
-				ctu13: ctu-7 { };
-			};
-
-			rcar_sound,src {
-				src0: src-0 {
-					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x85>, <&audma1 0x9a>;
-					dma-names = "rx", "tx";
-				};
-				src1: src-1 {
-					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x87>, <&audma1 0x9c>;
-					dma-names = "rx", "tx";
-				};
-				src2: src-2 {
-					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x89>, <&audma1 0x9e>;
-					dma-names = "rx", "tx";
-				};
-				src3: src-3 {
-					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
-					dma-names = "rx", "tx";
-				};
-				src4: src-4 {
-					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
-					dma-names = "rx", "tx";
-				};
-				src5: src-5 {
-					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
-					dma-names = "rx", "tx";
-				};
-				src6: src-6 {
-					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x91>, <&audma1 0xb4>;
-					dma-names = "rx", "tx";
-				};
-				src7: src-7 {
-					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x93>, <&audma1 0xb6>;
-					dma-names = "rx", "tx";
-				};
-				src8: src-8 {
-					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x95>, <&audma1 0xb8>;
-					dma-names = "rx", "tx";
-				};
-				src9: src-9 {
-					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x97>, <&audma1 0xba>;
-					dma-names = "rx", "tx";
-				};
-			};
-
-			rcar_sound,ssi {
-				ssi0: ssi-0 {
-					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi1: ssi-1 {
-					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi2: ssi-2 {
-					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi3: ssi-3 {
-					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi4: ssi-4 {
-					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi5: ssi-5 {
-					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi6: ssi-6 {
-					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi7: ssi-7 {
-					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi8: ssi-8 {
-					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi9: ssi-9 {
-					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-			};
-		};
-
-		audma0: dma-controller@ec700000 {
-			compatible = "renesas,dmac-r8a7744",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 502>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 502>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		audma1: dma-controller@ec720000 {
-			compatible = "renesas,dmac-r8a7744",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 501>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 501>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		/*
-		 * pci1 and xhci share the same phy, therefore only one of them
-		 * can be active at any one time. If both of them are enabled,
-		 * a race condition will determine who'll control the phy.
-		 * A firmware file is needed by the xhci driver in order for
-		 * USB 3.0 to work properly.
-		 */
-		xhci: usb@ee000000 {
-			compatible = "renesas,xhci-r8a7744",
-				     "renesas,rcar-gen2-xhci";
-			reg = <0 0xee000000 0 0xc00>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 328>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 328>;
-			phys = <&usb2 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		pci0: pci@ee090000 {
-			compatible = "renesas,pci-r8a7744",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee090000 0 0xc00>,
-			      <0 0xee080000 0 0x1100>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x800 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x1000 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-		};
-
-		pci1: pci@ee0d0000 {
-			compatible = "renesas,pci-r8a7744",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee0d0000 0 0xc00>,
-			      <0 0xee0c0000 0 0x1100>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <1 1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x10800 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x11000 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-		};
-
-		sdhi0: mmc@ee100000 {
-			compatible = "renesas,sdhi-r8a7744",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee100000 0 0x328>;
-			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
-			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
-			       <&dmac1 0xcd>, <&dmac1 0xce>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <195000000>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 314>;
-			status = "disabled";
-		};
-
-		sdhi1: mmc@ee140000 {
-			compatible = "renesas,sdhi-r8a7744",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee140000 0 0x100>;
-			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
-			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
-			       <&dmac1 0xc1>, <&dmac1 0xc2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 312>;
-			status = "disabled";
-		};
-
-		sdhi2: mmc@ee160000 {
-			compatible = "renesas,sdhi-r8a7744",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee160000 0 0x100>;
-			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
-			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
-			       <&dmac1 0xd3>, <&dmac1 0xd4>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 311>;
-			status = "disabled";
-		};
-
-		mmcif0: mmc@ee200000 {
-			compatible = "renesas,mmcif-r8a7744",
-				     "renesas,sh-mmcif";
-			reg = <0 0xee200000 0 0x80>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 315>;
-			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
-			       <&dmac1 0xd1>, <&dmac1 0xd2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 315>;
-			reg-io-width = <4>;
-			max-frequency = <97500000>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@f1001000 {
-			compatible = "arm,gic-400";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
-			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&cpg CPG_MOD 408>;
-			clock-names = "clk";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 408>;
-		};
-
-		pciec: pcie@fe000000 {
-			compatible = "renesas,pcie-r8a7744",
-				     "renesas,pcie-rcar-gen2";
-			reg = <0 0xfe000000 0 0x80000>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			bus-range = <0x00 0xff>;
-			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
-				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
-				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
-				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
-			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
-				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
-			clock-names = "pcie", "pcie_bus";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 319>;
-			status = "disabled";
-		};
-
-		vsp@fe928000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe928000 0 0x8000>;
-			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 131>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 131>;
-		};
-
-		vsp@fe930000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe930000 0 0x8000>;
-			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 128>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 128>;
-		};
-
-		vsp@fe938000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe938000 0 0x8000>;
-			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 127>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 127>;
-		};
-
-		du: display@feb00000 {
-			compatible = "renesas,du-r8a7744";
-			reg = <0 0xfeb00000 0 0x40000>;
-			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
-			clock-names = "du.0", "du.1";
-			resets = <&cpg 724>;
-			reset-names = "du.0";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					du_out_rgb: endpoint {
-					};
-				};
-				port@1 {
-					reg = <1>;
-					du_out_lvds0: endpoint {
-						remote-endpoint = <&lvds0_in>;
-					};
-				};
-			};
-		};
-
-		lvds0: lvds@feb90000 {
-			compatible = "renesas,r8a7744-lvds";
-			reg = <0 0xfeb90000 0 0x1c>;
-			clocks = <&cpg CPG_MOD 726>;
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 726>;
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					lvds0_in: endpoint {
-						remote-endpoint = <&du_out_lvds0>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					lvds0_out: endpoint {
-					};
-				};
-			};
-		};
-
-		prr: chipid@ff000044 {
-			compatible = "renesas,prr";
-			reg = <0 0xff000044 0 4>;
-		};
-
-		cmt0: timer@ffca0000 {
-			compatible = "renesas,r8a7744-cmt0",
-				     "renesas,rcar-gen2-cmt0";
-			reg = <0 0xffca0000 0 0x1004>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 124>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 124>;
-			status = "disabled";
-		};
-
-		cmt1: timer@e6130000 {
-			compatible = "renesas,r8a7744-cmt1",
-				     "renesas,rcar-gen2-cmt1";
-			reg = <0 0xe6130000 0 0x1004>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 329>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
-			resets = <&cpg 329>;
-			status = "disabled";
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	/* External USB clock - can be overridden by the board */
-	usb_extal_clk: usb_extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <48000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
deleted file mode 100644
index b1f679da36b2e..0000000000000
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave-RZG1E SODIMM carrier board + HDMI daughter
- * board
- *
- * Copyright (C) 2017 Renesas Electronics Corp.
- */
-
-#include "r8a7745-iwg22d-sodimm.dts"
-
-/ {
-	model = "iWave RainboW-G22D-SODIMM RZ/G1E based board with HDMI add-on";
-	compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745";
-
-	aliases {
-		serial0 = &scif1;
-		serial4 = &scif5;
-		serial6 = &hscif2;
-	};
-
-	cec_clock: cec-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-};
-
-&du {
-	pinctrl-0 = <&du0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7511_in>;
-			};
-		};
-	};
-};
-
-&can1 {
-	pinctrl-0 = <&can1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&hscif2 {
-	pinctrl-0 = <&hscif2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	hdmi@39 {
-		compatible = "adi,adv7511w";
-		reg = <0x39>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&cec_clock>;
-		clock-names = "cec";
-		pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7511_in: endpoint {
-					remote-endpoint = <&du_out_rgb0>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				adv7511_out: endpoint {
-					remote-endpoint = <&hdmi_con>;
-				};
-			};
-		};
-	};
-};
-
-&lcd_panel {
-	status = "disabled";
-
-	/delete-node/ port;
-};
-
-&pfc {
-	can1_pins: can1 {
-		groups = "can1_data_b";
-		function = "can1";
-	};
-
-	du0_pins: du0 {
-		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
-		function = "du0";
-	};
-
-	hscif2_pins: hscif2 {
-		groups = "hscif2_data";
-		function = "hscif2";
-	};
-
-	i2c1_pins: i2c1 {
-		groups = "i2c1_d";
-		function = "i2c1";
-	};
-
-	scif1_pins: scif1 {
-		groups = "scif1_data";
-		function = "scif1";
-	};
-
-	scif5_pins: scif5 {
-		groups = "scif5_data_d";
-		function = "scif5";
-	};
-};
-
-&scif1 {
-	pinctrl-0 = <&scif1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif5 {
-	pinctrl-0 = <&scif5_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
deleted file mode 100644
index c105932f642ea..0000000000000
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ /dev/null
@@ -1,329 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave-RZG1E SODIMM carrier board
- *
- * Copyright (C) 2017 Renesas Electronics Corp.
- */
-
-/*
- * SSI-SGTL5000
- *
- * This command is required when Playback/Capture
- *
- *      amixer set "DVC Out" 100%
- *      amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- *      amixer set "DVC Out Mute" on
- *      amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
- *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- *      amixer set "DVC Out Ramp" on
- *      aplay xxx.wav &
- *      amixer set "DVC Out"  80%  // Volume Down
- *      amixer set "DVC Out" 100%  // Volume Up
- */
-
-/dts-v1/;
-#include "r8a7745-iwg22m.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E";
-	compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745";
-
-	aliases {
-		ethernet0 = &avb;
-		serial3 = &scif4;
-		serial5 = &hscif1;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial3:115200n8";
-	};
-
-	audio_clock: audio_clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	backlight_lcd: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	lcd_panel: lcd {
-		compatible = "edt,etm043080dh6gp";
-		power-supply = <&vccq_panel>;
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&du_out_rgb0>;
-			};
-		};
-	};
-
-	vccq_panel: regulator-vccq-panel {
-		compatible = "regulator-fixed";
-		regulator-name = "Panel VccQ";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	rsnd_sgtl5000: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-};
-
-&avb {
-	pinctrl-0 = <&avb_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy3>;
-	phy-mode = "gmii";
-	renesas,no-ether-link;
-	status = "okay";
-
-	phy3: ethernet-phy@3 {
-	/*
-	 * On some older versions of the platform (before R4.0) the phy address
-	 * may be 1 or 3. The address is fixed to 3 for R4.0 onwards.
-	 */
-		compatible = "ethernet-phy-id0022.1622",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <3>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&can0 {
-	pinctrl-0 = <&can0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&du {
-	pinctrl-0 = <&du0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&lcd_in>;
-			};
-		};
-	};
-};
-
-&hscif1 {
-	pinctrl-0 = <&hscif1_pins>;
-	pinctrl-names = "default";
-
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&hsusb {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c5 {
-	pinctrl-0 = <&i2c5_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		clocks = <&audio_clock>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	stmpe811@44 {
-		compatible = "st,stmpe811";
-		reg = <0x44>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-
-		/* 3.25 MHz ADC clock speed */
-		st,adc-freq = <1>;
-		/* ADC conversion time: 80 clocks */
-		st,sample-time = <4>;
-		/* 12-bit ADC */
-		st,mod-12b = <1>;
-		/* internal ADC reference */
-		st,ref-sel = <0>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			/* 8 sample average control */
-			st,ave-ctrl = <3>;
-			/* 7 length fractional part in z */
-			st,fraction-z = <7>;
-			/*
-			 * 50 mA typical 80 mA max touchscreen drivers
-			 * current limit value
-			 */
-			st,i-drive = <1>;
-			/* 1 ms panel driver settling time */
-			st,settling = <3>;
-			/* 5 ms touch detect interrupt delay */
-			st,touch-det-delay = <5>;
-		};
-	};
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&pfc {
-	avb_pins: avb {
-		groups = "avb_mdio", "avb_gmii";
-		function = "avb";
-	};
-
-	backlight_pins: backlight {
-		groups = "tpu_to3_c";
-		function = "tpu";
-	};
-
-	can0_pins: can0 {
-		groups = "can0_data";
-		function = "can0";
-	};
-
-	du0_pins: du0 {
-		groups = "du0_rgb666", "du0_sync", "du0_disp", "du0_clk0_out";
-		function = "du0";
-	};
-
-	hscif1_pins: hscif1 {
-		groups = "hscif1_data", "hscif1_ctrl";
-		function = "hscif1";
-	};
-
-	i2c5_pins: i2c5 {
-		groups = "i2c5_b";
-		function = "i2c5";
-	};
-
-	scif4_pins: scif4 {
-		groups = "scif4_data_b";
-		function = "scif4";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <3300>;
-	};
-
-	sound_pins: sound {
-		groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
-		function = "ssi";
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
-	};
-};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	/* Single DAI */
-
-	#sound-dai-cells = <0>;
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi3>, <&src3>, <&dvc0>;
-			capture = <&ssi4>, <&src4>, <&dvc1>;
-		};
-	};
-};
-
-&scif4 {
-	pinctrl-0 = <&scif4_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ssi4 {
-	shared-pin;
-};
-
-&tpu {
-	pinctrl-0 = <&backlight_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi
deleted file mode 100644
index 41f111b99a759..0000000000000
--- a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave-RZG1E-G22M SODIMM SOM
- *
- * Copyright (C) 2017 Renesas Electronics Corp.
- */
-
-#include "r8a7745.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "iwave,g22m", "renesas,r8a7745";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x20000000>;
-	};
-
-	reg_3p3v: 3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&cmt0 {
-	status = "okay";
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	mmcif0_pins: mmc {
-		groups = "mmc_data8", "mmc_ctrl";
-		function = "mmc";
-	};
-
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data2";
-		function = "qspi";
-	};
-
-	sdhi1_pins: sd1 {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <3300>;
-	};
-
-	i2c3_pins: i2c3 {
-		groups = "i2c3_b";
-		function = "i2c3";
-	};
-};
-
-&mmcif0 {
-	pinctrl-0 = <&mmcif0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	/* WARNING - This device contains the bootloader. Handle with care. */
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <1>;
-		m25p,fast-read;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	rtc@68 {
-		compatible = "ti,bq32000";
-		reg = <0x68>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
deleted file mode 100644
index 0a75e8c79acc0..0000000000000
--- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the SK-RZG1E board
- *
- * Copyright (C) 2016-2017 Cogent Embedded, Inc.
- */
-
-/dts-v1/;
-#include "r8a7745.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "SK-RZG1E";
-	compatible = "renesas,sk-rzg1e", "renesas,r8a7745";
-
-	aliases {
-		serial0 = &scif2;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	scif2_pins: scif2 {
-		groups = "scif2_data";
-		function = "scif2";
-	};
-
-	ether_pins: ether {
-		groups = "eth_link", "eth_mdio", "eth_rmii";
-		function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		groups = "intc_irq8";
-		function = "intc";
-	};
-};
-
-&scif2 {
-	pinctrl-0 = <&scif2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0022.1537",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		interrupt-parent = <&irqc>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
deleted file mode 100644
index 44688b8431c3f..0000000000000
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ /dev/null
@@ -1,1589 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the r8a7745 SoC
- *
- * Copyright (C) 2016-2017 Cogent Embedded Inc.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/r8a7745-cpg-mssr.h>
-#include <dt-bindings/power/r8a7745-sysc.h>
-
-/ {
-	compatible = "renesas,r8a7745";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &iic0;
-		i2c7 = &iic1;
-		spi0 = &qspi;
-		spi1 = &msiof0;
-		spi2 = &msiof1;
-		spi3 = &msiof2;
-		vin0 = &vin0;
-		vin1 = &vin1;
-	};
-
-	/*
-	 * The external audio clocks are configured  as 0 Hz fixed
-	 * frequency clocks by default.  Boards that provide audio
-	 * clocks should override them.
-	 */
-	audio_clka: audio_clka {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clkb: audio_clkb {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clkc: audio_clkc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	/* External CAN clock */
-	can_clk: can {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-			clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
-			power-domains = <&sysc R8A7745_PD_CA7_CPU0>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA7>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-			clock-frequency = <1000000000>;
-			clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
-			power-domains = <&sysc R8A7745_PD_CA7_CPU1>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA7>;
-		};
-
-		L2_CA7: cache-controller-0 {
-			compatible = "cache";
-			cache-unified;
-			cache-level = <2>;
-			power-domains = <&sysc R8A7745_PD_CA7_SCU>;
-		};
-	};
-
-	/* External root clock */
-	extal_clk: extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	/* External SCIF clock */
-	scif_clk: scif {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		gpio0: gpio@e6050000 {
-			compatible = "renesas,gpio-r8a7745",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6050000 0 0x50>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 0 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 912>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 912>;
-		};
-
-		gpio1: gpio@e6051000 {
-			compatible = "renesas,gpio-r8a7745",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6051000 0 0x50>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 32 26>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 911>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 911>;
-		};
-
-		gpio2: gpio@e6052000 {
-			compatible = "renesas,gpio-r8a7745",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6052000 0 0x50>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 64 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 910>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 910>;
-		};
-
-		gpio3: gpio@e6053000 {
-			compatible = "renesas,gpio-r8a7745",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6053000 0 0x50>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 96 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 909>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 909>;
-		};
-
-		gpio4: gpio@e6054000 {
-			compatible = "renesas,gpio-r8a7745",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6054000 0 0x50>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 128 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 908>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 908>;
-		};
-
-		gpio5: gpio@e6055000 {
-			compatible = "renesas,gpio-r8a7745",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055000 0 0x50>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 160 28>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 907>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 907>;
-		};
-
-		gpio6: gpio@e6055400 {
-			compatible = "renesas,gpio-r8a7745",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055400 0 0x50>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 192 26>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 905>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 905>;
-		};
-
-		pfc: pinctrl@e6060000 {
-			compatible = "renesas,pfc-r8a7745";
-			reg = <0 0xe6060000 0 0x11c>;
-		};
-
-		tpu: pwm@e60f0000 {
-			compatible = "renesas,tpu-r8a7745", "renesas,tpu";
-			reg = <0 0xe60f0000 0 0x148>;
-			clocks = <&cpg CPG_MOD 304>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 304>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		cpg: clock-controller@e6150000 {
-			compatible = "renesas,r8a7745-cpg-mssr";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>, <&usb_extal_clk>;
-			clock-names = "extal", "usb_extal";
-			#clock-cells = <2>;
-			#power-domain-cells = <0>;
-			#reset-cells = <1>;
-		};
-
-		apmu@e6151000 {
-			compatible = "renesas,r8a7745-apmu", "renesas,apmu";
-			reg = <0 0xe6151000 0 0x188>;
-			cpus = <&cpu0>, <&cpu1>;
-		};
-
-		rst: reset-controller@e6160000 {
-			compatible = "renesas,r8a7745-rst";
-			reg = <0 0xe6160000 0 0x100>;
-		};
-
-		rwdt: watchdog@e6020000 {
-			compatible = "renesas,r8a7745-wdt",
-				     "renesas,rcar-gen2-wdt";
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0 0xe6020000 0 0x0c>;
-			clocks = <&cpg CPG_MOD 402>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 402>;
-			status = "disabled";
-		};
-
-		sysc: system-controller@e6180000 {
-			compatible = "renesas,r8a7745-sysc";
-			reg = <0 0xe6180000 0 0x200>;
-			#power-domain-cells = <1>;
-		};
-
-		irqc: interrupt-controller@e61c0000 {
-			compatible = "renesas,irqc-r8a7745", "renesas,irqc";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 407>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 407>;
-		};
-
-		ipmmu_sy0: iommu@e6280000 {
-			compatible = "renesas,ipmmu-r8a7745",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6280000 0 0x1000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_sy1: iommu@e6290000 {
-			compatible = "renesas,ipmmu-r8a7745",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6290000 0 0x1000>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_ds: iommu@e6740000 {
-			compatible = "renesas,ipmmu-r8a7745",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6740000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mp: iommu@ec680000 {
-			compatible = "renesas,ipmmu-r8a7745",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xec680000 0 0x1000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mx: iommu@fe951000 {
-			compatible = "renesas,ipmmu-r8a7745",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xfe951000 0 0x1000>;
-			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_gp: iommu@e62a0000 {
-			compatible = "renesas,ipmmu-r8a7745",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe62a0000 0 0x1000>;
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		icram0:	sram@e63a0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63a0000 0 0x12000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63a0000 0x12000>;
-		};
-
-		icram1:	sram@e63c0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63c0000 0 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63c0000 0x1000>;
-
-			smp-sram@0 {
-				compatible = "renesas,smp-sram";
-				reg = <0 0x100>;
-			};
-		};
-
-		icram2:	sram@e6300000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe6300000 0 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe6300000 0x40000>;
-		};
-		i2c0: i2c@e6508000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7745",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6508000 0 0x40>;
-			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 931>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 931>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@e6518000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7745",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6518000 0 0x40>;
-			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 930>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 930>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@e6530000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7745",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6530000 0 0x40>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 929>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 929>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@e6540000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7745",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6540000 0 0x40>;
-			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 928>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 928>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c4: i2c@e6520000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7745",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6520000 0 0x40>;
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 927>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 927>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c5: i2c@e6528000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7745",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6528000 0 0x40>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 925>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 925>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		iic0: i2c@e6500000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7745",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6500000 0 0x425>;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 318>;
-			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
-			       <&dmac1 0x61>, <&dmac1 0x62>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 318>;
-			status = "disabled";
-		};
-
-		iic1: i2c@e6510000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7745",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6510000 0 0x425>;
-			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 323>;
-			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
-			       <&dmac1 0x65>, <&dmac1 0x66>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 323>;
-			status = "disabled";
-		};
-
-		hsusb: usb@e6590000 {
-			compatible = "renesas,usbhs-r8a7745",
-				     "renesas,rcar-gen2-usbhs";
-			reg = <0 0xe6590000 0 0x100>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 704>;
-			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
-			       <&usb_dmac1 0>, <&usb_dmac1 1>;
-			dma-names = "ch0", "ch1", "ch2", "ch3";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			renesas,buswait = <4>;
-			phys = <&usb0 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		usbphy: usb-phy-controller@e6590100 {
-			compatible = "renesas,usb-phy-r8a7745",
-				     "renesas,rcar-gen2-usb-phy";
-			reg = <0 0xe6590100 0 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cpg CPG_MOD 704>;
-			clock-names = "usbhs";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			status = "disabled";
-
-			usb0: usb-phy@0 {
-				reg = <0>;
-				#phy-cells = <1>;
-			};
-			usb2: usb-phy@2 {
-				reg = <2>;
-				#phy-cells = <1>;
-			};
-		};
-
-		usb_dmac0: dma-controller@e65a0000 {
-			compatible = "renesas,r8a7745-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 330>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 330>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		usb_dmac1: dma-controller@e65b0000 {
-			compatible = "renesas,r8a7745-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 331>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 331>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		dmac0: dma-controller@e6700000 {
-			compatible = "renesas,dmac-r8a7745",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 219>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 219>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		dmac1: dma-controller@e6720000 {
-			compatible = "renesas,dmac-r8a7745",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 218>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 218>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		avb: ethernet@e6800000 {
-			compatible = "renesas,etheravb-r8a7745",
-				     "renesas,etheravb-rcar-gen2";
-			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
-			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 812>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 812>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		qspi: spi@e6b10000 {
-			compatible = "renesas,qspi-r8a7745", "renesas,qspi";
-			reg = <0 0xe6b10000 0 0x2c>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 917>;
-			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
-			       <&dmac1 0x17>, <&dmac1 0x18>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 917>;
-			status = "disabled";
-		};
-
-		scifa0: serial@e6c40000 {
-			compatible = "renesas,scifa-r8a7745",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c40000 0 0x40>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 204>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
-			       <&dmac1 0x21>, <&dmac1 0x22>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 204>;
-			status = "disabled";
-		};
-
-		scifa1: serial@e6c50000 {
-			compatible = "renesas,scifa-r8a7745",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c50000 0 0x40>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 203>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
-			       <&dmac1 0x25>, <&dmac1 0x26>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 203>;
-			status = "disabled";
-		};
-
-		scifa2: serial@e6c60000 {
-			compatible = "renesas,scifa-r8a7745",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c60000 0 0x40>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 202>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
-			       <&dmac1 0x27>, <&dmac1 0x28>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 202>;
-			status = "disabled";
-		};
-
-		scifa3: serial@e6c70000 {
-			compatible = "renesas,scifa-r8a7745",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c70000 0 0x40>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1106>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
-			       <&dmac1 0x1b>, <&dmac1 0x1c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 1106>;
-			status = "disabled";
-		};
-
-		scifa4: serial@e6c78000 {
-			compatible = "renesas,scifa-r8a7745",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c78000 0 0x40>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1107>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
-			       <&dmac1 0x1f>, <&dmac1 0x20>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 1107>;
-			status = "disabled";
-		};
-
-		scifa5: serial@e6c80000 {
-			compatible = "renesas,scifa-r8a7745",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c80000 0 0x40>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1108>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
-			       <&dmac1 0x23>, <&dmac1 0x24>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 1108>;
-			status = "disabled";
-		};
-
-		scifb0: serial@e6c20000 {
-			compatible = "renesas,scifb-r8a7745",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c20000 0 0x100>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 206>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
-			       <&dmac1 0x3d>, <&dmac1 0x3e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 206>;
-			status = "disabled";
-		};
-
-		scifb1: serial@e6c30000 {
-			compatible = "renesas,scifb-r8a7745",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c30000 0 0x100>;
-			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 207>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
-			       <&dmac1 0x19>, <&dmac1 0x1a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 207>;
-			status = "disabled";
-		};
-
-		scifb2: serial@e6ce0000 {
-			compatible = "renesas,scifb-r8a7745",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6ce0000 0 0x100>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 216>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
-			       <&dmac1 0x1d>, <&dmac1 0x1e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 216>;
-			status = "disabled";
-		};
-
-		scif0: serial@e6e60000 {
-			compatible = "renesas,scif-r8a7745",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e60000 0 0x40>;
-			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 721>,
-				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
-			       <&dmac1 0x29>, <&dmac1 0x2a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 721>;
-			status = "disabled";
-		};
-
-		scif1: serial@e6e68000 {
-			compatible = "renesas,scif-r8a7745",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e68000 0 0x40>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 720>,
-				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
-			       <&dmac1 0x2d>, <&dmac1 0x2e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 720>;
-			status = "disabled";
-		};
-
-		scif2: serial@e6e58000 {
-			compatible = "renesas,scif-r8a7745",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e58000 0 0x40>;
-			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 719>,
-				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
-			       <&dmac1 0x2b>, <&dmac1 0x2c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 719>;
-			status = "disabled";
-		};
-
-		scif3: serial@e6ea8000 {
-			compatible = "renesas,scif-r8a7745",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ea8000 0 0x40>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 718>,
-				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
-			       <&dmac1 0x2f>, <&dmac1 0x30>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 718>;
-			status = "disabled";
-		};
-
-		scif4: serial@e6ee0000 {
-			compatible = "renesas,scif-r8a7745",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee0000 0 0x40>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 715>,
-				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
-			       <&dmac1 0xfb>, <&dmac1 0xfc>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 715>;
-			status = "disabled";
-		};
-
-		scif5: serial@e6ee8000 {
-			compatible = "renesas,scif-r8a7745",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee8000 0 0x40>;
-			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 714>,
-				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
-			       <&dmac1 0xfd>, <&dmac1 0xfe>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 714>;
-			status = "disabled";
-		};
-
-		hscif0: serial@e62c0000 {
-			compatible = "renesas,hscif-r8a7745",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c0000 0 0x60>;
-			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 717>,
-				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
-			       <&dmac1 0x39>, <&dmac1 0x3a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 717>;
-			status = "disabled";
-		};
-
-		hscif1: serial@e62c8000 {
-			compatible = "renesas,hscif-r8a7745",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c8000 0 0x60>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 716>,
-				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
-			       <&dmac1 0x4d>, <&dmac1 0x4e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 716>;
-			status = "disabled";
-		};
-
-		hscif2: serial@e62d0000 {
-			compatible = "renesas,hscif-r8a7745",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62d0000 0 0x60>;
-			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 713>,
-				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
-			       <&dmac1 0x3b>, <&dmac1 0x3c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 713>;
-			status = "disabled";
-		};
-
-		msiof0: spi@e6e20000 {
-			compatible = "renesas,msiof-r8a7745",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e20000 0 0x0064>;
-			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 000>;
-			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
-			       <&dmac1 0x51>, <&dmac1 0x52>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 000>;
-			status = "disabled";
-		};
-
-		msiof1: spi@e6e10000 {
-			compatible = "renesas,msiof-r8a7745",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e10000 0 0x0064>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 208>;
-			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
-			       <&dmac1 0x55>, <&dmac1 0x56>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 208>;
-			status = "disabled";
-		};
-
-		msiof2: spi@e6e00000 {
-			compatible = "renesas,msiof-r8a7745",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e00000 0 0x0064>;
-			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 205>;
-			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
-			       <&dmac1 0x41>, <&dmac1 0x42>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 205>;
-			status = "disabled";
-		};
-
-		pwm0: pwm@e6e30000 {
-			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
-			reg = <0 0xe6e30000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm1: pwm@e6e31000 {
-			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
-			reg = <0 0xe6e31000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm2: pwm@e6e32000 {
-			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
-			reg = <0 0xe6e32000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm3: pwm@e6e33000 {
-			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
-			reg = <0 0xe6e33000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm4: pwm@e6e34000 {
-			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
-			reg = <0 0xe6e34000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm5: pwm@e6e35000 {
-			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
-			reg = <0 0xe6e35000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm6: pwm@e6e36000 {
-			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
-			reg = <0 0xe6e36000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		can0: can@e6e80000 {
-			compatible = "renesas,can-r8a7745",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e80000 0 0x1000>;
-			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 916>,
-				 <&cpg CPG_CORE R8A7745_CLK_RCAN>,
-				 <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 916>;
-			status = "disabled";
-		};
-
-		can1: can@e6e88000 {
-			compatible = "renesas,can-r8a7745",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e88000 0 0x1000>;
-			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 915>,
-				 <&cpg CPG_CORE R8A7745_CLK_RCAN>,
-				 <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 915>;
-			status = "disabled";
-		};
-
-		vin0: video@e6ef0000 {
-			compatible = "renesas,vin-r8a7745",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef0000 0 0x1000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 811>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 811>;
-			status = "disabled";
-		};
-
-		vin1: video@e6ef1000 {
-			compatible = "renesas,vin-r8a7745",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef1000 0 0x1000>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 810>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 810>;
-			status = "disabled";
-		};
-
-		rcar_sound: sound@ec500000 {
-			/*
-			 * #sound-dai-cells is required if simple-card
-			 *
-			 * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
-			 * Multi  DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
-			 */
-			compatible = "renesas,rcar_sound-r8a7745",
-				     "renesas,rcar_sound-gen2";
-			reg = <0 0xec500000 0 0x1000>, /* SCU */
-			      <0 0xec5a0000 0 0x100>,  /* ADG */
-			      <0 0xec540000 0 0x1000>, /* SSIU */
-			      <0 0xec541000 0 0x280>,  /* SSI */
-			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri */
-			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
-			clocks = <&cpg CPG_MOD 1005>,
-				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
-				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
-				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
-				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
-				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
-				 <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
-				 <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>,
-				 <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
-				 <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
-				 <&cpg CPG_CORE R8A7745_CLK_M2>;
-			clock-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
-				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
-				      "ssi.1", "ssi.0",
-				      "src.6", "src.5", "src.4", "src.3",
-				      "src.2", "src.1",
-				      "ctu.0", "ctu.1",
-				      "mix.0", "mix.1",
-				      "dvc.0", "dvc.1",
-				      "clk_a", "clk_b", "clk_c", "clk_i";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 1005>,
-				 <&cpg 1006>, <&cpg 1007>, <&cpg 1008>,
-				 <&cpg 1009>, <&cpg 1010>, <&cpg 1011>,
-				 <&cpg 1012>, <&cpg 1013>, <&cpg 1014>,
-				 <&cpg 1015>;
-			reset-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
-				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
-				      "ssi.1", "ssi.0";
-
-			status = "disabled";
-
-			rcar_sound,dvc {
-				dvc0: dvc-0 {
-					dmas = <&audma0 0xbc>;
-					dma-names = "tx";
-				};
-				dvc1: dvc-1 {
-					dmas = <&audma0 0xbe>;
-					dma-names = "tx";
-				};
-			};
-
-			rcar_sound,mix {
-				mix0: mix-0 { };
-				mix1: mix-1 { };
-			};
-
-			rcar_sound,ctu {
-				ctu00: ctu-0 { };
-				ctu01: ctu-1 { };
-				ctu02: ctu-2 { };
-				ctu03: ctu-3 { };
-				ctu10: ctu-4 { };
-				ctu11: ctu-5 { };
-				ctu12: ctu-6 { };
-				ctu13: ctu-7 { };
-			};
-
-			rcar_sound,src {
-				src-0 {
-					status = "disabled";
-				};
-				src1: src-1 {
-					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x87>, <&audma0 0x9c>;
-					dma-names = "rx", "tx";
-				};
-				src2: src-2 {
-					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x89>, <&audma0 0x9e>;
-					dma-names = "rx", "tx";
-				};
-				src3: src-3 {
-					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
-					dma-names = "rx", "tx";
-				};
-				src4: src-4 {
-					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
-					dma-names = "rx", "tx";
-				};
-				src5: src-5 {
-					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
-					dma-names = "rx", "tx";
-				};
-				src6: src-6 {
-					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x91>, <&audma0 0xb4>;
-					dma-names = "rx", "tx";
-				};
-			};
-
-			rcar_sound,ssi {
-				ssi0: ssi-0 {
-					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x01>, <&audma0 0x02>,
-					       <&audma0 0x15>, <&audma0 0x16>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi1: ssi-1 {
-					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x03>, <&audma0 0x04>,
-					       <&audma0 0x49>, <&audma0 0x4a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi2: ssi-2 {
-					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x05>, <&audma0 0x06>,
-					       <&audma0 0x63>, <&audma0 0x64>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi3: ssi-3 {
-					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x07>, <&audma0 0x08>,
-					       <&audma0 0x6f>, <&audma0 0x70>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi4: ssi-4 {
-					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x09>, <&audma0 0x0a>,
-					       <&audma0 0x71>, <&audma0 0x72>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi5: ssi-5 {
-					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
-					       <&audma0 0x73>, <&audma0 0x74>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi6: ssi-6 {
-					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
-					       <&audma0 0x75>, <&audma0 0x76>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi7: ssi-7 {
-					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0f>, <&audma0 0x10>,
-					       <&audma0 0x79>, <&audma0 0x7a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi8: ssi-8 {
-					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x11>, <&audma0 0x12>,
-					       <&audma0 0x7b>, <&audma0 0x7c>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi9: ssi-9 {
-					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x13>, <&audma0 0x14>,
-					       <&audma0 0x7d>, <&audma0 0x7e>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-			};
-		};
-
-		audma0: dma-controller@ec700000 {
-			compatible = "renesas,dmac-r8a7745",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 502>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 502>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		pci0: pci@ee090000 {
-			compatible = "renesas,pci-r8a7745",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee090000 0 0xc00>,
-			      <0 0xee080000 0 0x1100>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x800 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x1000 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-		};
-
-		pci1: pci@ee0d0000 {
-			compatible = "renesas,pci-r8a7745",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee0d0000 0 0xc00>,
-			      <0 0xee0c0000 0 0x1100>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <1 1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x10800 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x11000 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-		};
-
-		sdhi0: mmc@ee100000 {
-			compatible = "renesas,sdhi-r8a7745",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee100000 0 0x328>;
-			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
-			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
-			       <&dmac1 0xcd>, <&dmac1 0xce>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <195000000>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 314>;
-			status = "disabled";
-		};
-
-		sdhi1: mmc@ee140000 {
-			compatible = "renesas,sdhi-r8a7745",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee140000 0 0x100>;
-			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
-			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
-			       <&dmac1 0xc1>, <&dmac1 0xc2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 312>;
-			status = "disabled";
-		};
-
-		sdhi2: mmc@ee160000 {
-			compatible = "renesas,sdhi-r8a7745",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee160000 0 0x100>;
-			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
-			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
-			       <&dmac1 0xd3>, <&dmac1 0xd4>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 311>;
-			status = "disabled";
-		};
-
-		mmcif0: mmc@ee200000 {
-			compatible = "renesas,mmcif-r8a7745",
-				     "renesas,sh-mmcif";
-			reg = <0 0xee200000 0 0x80>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 315>;
-			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
-			       <&dmac1 0xd1>, <&dmac1 0xd2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 315>;
-			reg-io-width = <4>;
-			max-frequency = <97500000>;
-			status = "disabled";
-		};
-
-		ether: ethernet@ee700000 {
-			compatible = "renesas,ether-r8a7745",
-				     "renesas,rcar-gen2-ether";
-			reg = <0 0xee700000 0 0x400>;
-			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 813>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 813>;
-			phy-mode = "rmii";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@f1001000 {
-			compatible = "arm,gic-400";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
-			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&cpg CPG_MOD 408>;
-			clock-names = "clk";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 408>;
-		};
-
-		vsp@fe928000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe928000 0 0x8000>;
-			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 131>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 131>;
-		};
-
-		vsp@fe930000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe930000 0 0x8000>;
-			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 128>;
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 128>;
-		};
-
-		du: display@feb00000 {
-			compatible = "renesas,du-r8a7745";
-			reg = <0 0xfeb00000 0 0x40000>;
-			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
-			clock-names = "du.0", "du.1";
-			resets = <&cpg 724>;
-			reset-names = "du.0";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					du_out_rgb0: endpoint {
-					};
-				};
-				port@1 {
-					reg = <1>;
-					du_out_rgb1: endpoint {
-					};
-				};
-			};
-		};
-
-		prr: chipid@ff000044 {
-			compatible = "renesas,prr";
-			reg = <0 0xff000044 0 4>;
-		};
-
-		cmt0: timer@ffca0000 {
-			compatible = "renesas,r8a7745-cmt0",
-				     "renesas,rcar-gen2-cmt0";
-			reg = <0 0xffca0000 0 0x1004>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 124>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 124>;
-			status = "disabled";
-		};
-
-		cmt1: timer@e6130000 {
-			compatible = "renesas,r8a7745-cmt1",
-				     "renesas,rcar-gen2-cmt1";
-			reg = <0 0xe6130000 0 0x1004>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 329>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
-			resets = <&cpg 329>;
-			status = "disabled";
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	/* External USB clock - can be overridden by the board */
-	usb_extal_clk: usb_extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <48000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
deleted file mode 100644
index 6448022852491..0000000000000
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ /dev/null
@@ -1,321 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave-RZ/G1C single board computer
- *
- * Copyright (C) 2018 Renesas Electronics Corp.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "r8a77470.dtsi"
-/ {
-	model = "iWave iW-RainboW-G23S single board computer based on RZ/G1C";
-	compatible = "iwave,g23s", "renesas,r8a77470";
-
-	aliases {
-		ethernet0 = &avb;
-		serial1 = &scif1;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial1:115200n8";
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&bridge_out>;
-			};
-		};
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x20000000>;
-	};
-
-	reg_1p8v: reg-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: reg-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vccq_sdhi2: regulator-vccq-sdhi2 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-};
-
-&avb {
-	pinctrl-0 = <&avb_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy3>;
-	phy-mode = "gmii";
-	renesas,no-ether-link;
-	status = "okay";
-
-	phy3: ethernet-phy@3 {
-		compatible = "ethernet-phy-id0022.1622",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <3>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&cmt0 {
-	status = "okay";
-};
-
-&du {
-	pinctrl-0 = <&du0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&bridge_in>;
-			};
-		};
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&gpio2 {
-	interrupt-fixup-hog {
-		gpio-hog;
-		gpios = <29 GPIO_ACTIVE_HIGH>;
-		line-name = "hdmi-hpd-int";
-		input;
-	};
-};
-
-&hsusb0 {
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	rtc@51 {
-		compatible = "nxp,pcf85263";
-		reg = <0x51>;
-	};
-};
-
-&i2c4 {
-	pinctrl-0 = <&i2c4_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <100000>;
-
-	hdmi@39 {
-		compatible = "sil,sii9022";
-		reg = <0x39>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				bridge_in: endpoint {
-					remote-endpoint = <&du_out_rgb0>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				bridge_out: endpoint {
-					remote-endpoint = <&hdmi_con>;
-				};
-			};
-		};
-	};
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&pfc {
-	avb_pins: avb {
-		groups = "avb_mdio", "avb_gmii_tx_rx";
-		function = "avb";
-	};
-
-	du0_pins: du0 {
-		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
-		function = "du0";
-	};
-
-	i2c4_pins: i2c4 {
-		groups = "i2c4_e";
-		function = "i2c4";
-	};
-
-	i2c3_pins: i2c3 {
-		groups = "i2c3_c";
-		function = "i2c3";
-	};
-
-	mmc_pins_uhs: mmc_uhs {
-		groups = "mmc_data8", "mmc_ctrl";
-		function = "mmc";
-		power-source = <1800>;
-	};
-
-	qspi0_pins: qspi0 {
-		groups = "qspi0_ctrl", "qspi0_data2";
-		function = "qspi0";
-	};
-
-	scif1_pins: scif1 {
-		groups = "scif1_data_b";
-		function = "scif1";
-	};
-
-	sdhi2_pins: sd2 {
-		groups = "sdhi2_data4", "sdhi2_ctrl";
-		function = "sdhi2";
-		power-source = <3300>;
-	};
-
-	sdhi2_pins_uhs: sd2_uhs {
-		groups = "sdhi2_data4", "sdhi2_ctrl";
-		function = "sdhi2";
-		power-source = <1800>;
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
-	};
-};
-
-&qspi0 {
-	pinctrl-0 = <&qspi0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	/* WARNING - This device contains the bootloader. Handle with care. */
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "issi,is25lp016d", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <133000000>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <1>;
-		m25p,fast-read;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&scif1 {
-	pinctrl-0 = <&scif1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi1 {
-	pinctrl-0 = <&mmc_pins_uhs>;
-	pinctrl-names = "state_uhs";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_1p8v>;
-	bus-width = <8>;
-	mmc-hs200-1_8v;
-	non-removable;
-	fixed-emmc-driver-type = <1>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-1 = <&sdhi2_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
-	sd-uhs-sdr50;
-	status = "okay";
-};
-
-&usb2_phy0 {
-	status = "okay";
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usbphy0 {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&usbphy1 {
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
deleted file mode 100644
index a5cf663a0118e..0000000000000
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ /dev/null
@@ -1,1028 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the r8a77470 SoC
- *
- * Copyright (C) 2018 Renesas Electronics Corp.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/r8a77470-cpg-mssr.h>
-#include <dt-bindings/power/r8a77470-sysc.h>
-/ {
-	compatible = "renesas,r8a77470";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-			clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
-			power-domains = <&sysc R8A77470_PD_CA7_CPU0>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA7>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-			clock-frequency = <1000000000>;
-			clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
-			power-domains = <&sysc R8A77470_PD_CA7_CPU1>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA7>;
-		};
-
-		L2_CA7: cache-controller-0 {
-			compatible = "cache";
-			cache-unified;
-			cache-level = <2>;
-			power-domains = <&sysc R8A77470_PD_CA7_SCU>;
-		};
-	};
-
-	/* External root clock */
-	extal_clk: extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	/* External SCIF clock */
-	scif_clk: scif {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		rwdt: watchdog@e6020000 {
-			compatible = "renesas,r8a77470-wdt",
-				     "renesas,rcar-gen2-wdt";
-			reg = <0 0xe6020000 0 0x0c>;
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 402>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 402>;
-			status = "disabled";
-		};
-
-		gpio0: gpio@e6050000 {
-			compatible = "renesas,gpio-r8a77470",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6050000 0 0x50>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 0 23>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 912>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 912>;
-		};
-
-		gpio1: gpio@e6051000 {
-			compatible = "renesas,gpio-r8a77470",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6051000 0 0x50>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 32 23>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 911>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 911>;
-		};
-
-		gpio2: gpio@e6052000 {
-			compatible = "renesas,gpio-r8a77470",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6052000 0 0x50>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 64 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 910>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 910>;
-		};
-
-		gpio3: gpio@e6053000 {
-			compatible = "renesas,gpio-r8a77470",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6053000 0 0x50>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 96 30>;
-			gpio-reserved-ranges = <17 10>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 909>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 909>;
-		};
-
-		gpio4: gpio@e6054000 {
-			compatible = "renesas,gpio-r8a77470",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6054000 0 0x50>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 128 26>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 908>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 908>;
-		};
-
-		gpio5: gpio@e6055000 {
-			compatible = "renesas,gpio-r8a77470",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055000 0 0x50>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 160 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 907>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 907>;
-		};
-
-		pfc: pinctrl@e6060000 {
-			compatible = "renesas,pfc-r8a77470";
-			reg = <0 0xe6060000 0 0x118>;
-		};
-
-		cpg: clock-controller@e6150000 {
-			compatible = "renesas,r8a77470-cpg-mssr";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>, <&usb_extal_clk>;
-			clock-names = "extal", "usb_extal";
-			#clock-cells = <2>;
-			#power-domain-cells = <0>;
-			#reset-cells = <1>;
-		};
-
-		apmu@e6151000 {
-			compatible = "renesas,r8a77470-apmu", "renesas,apmu";
-			reg = <0 0xe6151000 0 0x188>;
-			cpus = <&cpu0>, <&cpu1>;
-		};
-
-		rst: reset-controller@e6160000 {
-			compatible = "renesas,r8a77470-rst";
-			reg = <0 0xe6160000 0 0x100>;
-		};
-
-		sysc: system-controller@e6180000 {
-			compatible = "renesas,r8a77470-sysc";
-			reg = <0 0xe6180000 0 0x200>;
-			#power-domain-cells = <1>;
-		};
-
-		irqc: interrupt-controller@e61c0000 {
-			compatible = "renesas,irqc-r8a77470", "renesas,irqc";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 407>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 407>;
-		};
-
-		icram0:	sram@e63a0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63a0000 0 0x12000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63a0000 0x12000>;
-		};
-
-		icram1:	sram@e63c0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63c0000 0 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63c0000 0x1000>;
-
-			smp-sram@0 {
-				compatible = "renesas,smp-sram";
-				reg = <0 0x100>;
-			};
-		};
-
-		icram2:	sram@e6300000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe6300000 0 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe6300000 0x20000>;
-		};
-
-		i2c0: i2c@e6508000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a77470",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6508000 0 0x40>;
-			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 931>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 931>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@e6518000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a77470",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6518000 0 0x40>;
-			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 930>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 930>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@e6530000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a77470",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6530000 0 0x40>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 929>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 929>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@e6540000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a77470",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6540000 0 0x40>;
-			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 928>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 928>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c4: i2c@e6520000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a77470",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6520000 0 0x40>;
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 927>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 927>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		hsusb0: hsusb@e6590000 {
-			compatible = "renesas,usbhs-r8a77470",
-				     "renesas,rcar-gen2-usbhs";
-			reg = <0 0xe6590000 0 0x100>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 704>;
-			dmas = <&usb_dmac00 0>, <&usb_dmac00 1>,
-			       <&usb_dmac10 0>, <&usb_dmac10 1>;
-			dma-names = "ch0", "ch1", "ch2", "ch3";
-			renesas,buswait = <4>;
-			phys = <&usb0 1>;
-			phy-names = "usb";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			status = "disabled";
-		};
-
-		usbphy0: usb-phy-controller@e6590100 {
-			compatible = "renesas,usb-phy-r8a77470",
-				     "renesas,rcar-gen2-usb-phy";
-			reg = <0 0xe6590100 0 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cpg CPG_MOD 704>;
-			clock-names = "usbhs";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			status = "disabled";
-
-			usb0: usb-phy@0 {
-				reg = <0>;
-				#phy-cells = <1>;
-			};
-		};
-
-		hsusb1: hsusb@e6598000 {
-			compatible = "renesas,usbhs-r8a77470",
-				     "renesas,rcar-gen2-usbhs";
-			reg = <0 0xe6598000 0 0x100>;
-			interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 706>;
-			dmas = <&usb_dmac01 0>, <&usb_dmac01 1>,
-			       <&usb_dmac11 0>, <&usb_dmac11 1>;
-			dma-names = "ch0", "ch1", "ch2", "ch3";
-			renesas,buswait = <4>;
-			/* We need to turn on usbphy0 to make usbphy1 to work */
-			phys = <&usb1 1>;
-			phy-names = "usb";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 706>;
-			status = "disabled";
-		};
-
-		usbphy1: usb-phy-controller@e6598100 {
-			compatible = "renesas,usb-phy-r8a77470",
-				     "renesas,rcar-gen2-usb-phy";
-			reg = <0 0xe6598100 0 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cpg CPG_MOD 706>;
-			clock-names = "usbhs";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 706>;
-			status = "disabled";
-
-			usb1: usb-phy@0 {
-				reg = <0>;
-				#phy-cells = <1>;
-			};
-		};
-
-		usb_dmac00: dma-controller@e65a0000 {
-			compatible = "renesas,r8a77470-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 330>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 330>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		usb_dmac10: dma-controller@e65b0000 {
-			compatible = "renesas,r8a77470-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 331>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 331>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		usb_dmac01: dma-controller@e65a8000 {
-			compatible = "renesas,r8a77470-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65a8000 0 0x100>;
-			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 326>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 326>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		usb_dmac11: dma-controller@e65b8000 {
-			compatible = "renesas,r8a77470-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65b8000 0 0x100>;
-			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 327>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 327>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		dmac0: dma-controller@e6700000 {
-			compatible = "renesas,dmac-r8a77470",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 219>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 219>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		dmac1: dma-controller@e6720000 {
-			compatible = "renesas,dmac-r8a77470",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 218>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 218>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		avb: ethernet@e6800000 {
-			compatible = "renesas,etheravb-r8a77470",
-				     "renesas,etheravb-rcar-gen2";
-			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
-			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 812>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 812>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		qspi0: spi@e6b10000 {
-			compatible = "renesas,qspi-r8a77470", "renesas,qspi";
-			reg = <0 0xe6b10000 0 0x2c>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 918>;
-			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
-			       <&dmac1 0x17>, <&dmac1 0x18>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 918>;
-			status = "disabled";
-		};
-
-		qspi1: spi@ee200000 {
-			compatible = "renesas,qspi-r8a77470", "renesas,qspi";
-			reg = <0 0xee200000 0 0x2c>;
-			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 917>;
-			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
-			       <&dmac1 0xd1>, <&dmac1 0xd2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&cpg 917>;
-			status = "disabled";
-		};
-
-		scif0: serial@e6e60000 {
-			compatible = "renesas,scif-r8a77470",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e60000 0 0x40>;
-			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 721>,
-				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
-			       <&dmac1 0x29>, <&dmac1 0x2a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 721>;
-			status = "disabled";
-		};
-
-		scif1: serial@e6e68000 {
-			compatible = "renesas,scif-r8a77470",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e68000 0 0x40>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 720>,
-				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
-			       <&dmac1 0x2d>, <&dmac1 0x2e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 720>;
-			status = "disabled";
-		};
-
-		scif2: serial@e6e58000 {
-			compatible = "renesas,scif-r8a77470",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e58000 0 0x40>;
-			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 719>,
-				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
-			       <&dmac1 0x2b>, <&dmac1 0x2c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 719>;
-			status = "disabled";
-		};
-
-		scif3: serial@e6ea8000 {
-			compatible = "renesas,scif-r8a77470",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ea8000 0 0x40>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 718>,
-				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
-			       <&dmac1 0x2f>, <&dmac1 0x30>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 718>;
-			status = "disabled";
-		};
-
-		scif4: serial@e6ee0000 {
-			compatible = "renesas,scif-r8a77470",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee0000 0 0x40>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 715>,
-				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
-			       <&dmac1 0xfb>, <&dmac1 0xfc>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 715>;
-			status = "disabled";
-		};
-
-		scif5: serial@e6ee8000 {
-			compatible = "renesas,scif-r8a77470",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee8000 0 0x40>;
-			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 714>,
-				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
-			       <&dmac1 0xfd>, <&dmac1 0xfe>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 714>;
-			status = "disabled";
-		};
-
-		hscif0: serial@e62c0000 {
-			compatible = "renesas,hscif-r8a77470",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c0000 0 0x60>;
-			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 717>,
-				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
-			       <&dmac1 0x39>, <&dmac1 0x3a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 717>;
-			status = "disabled";
-		};
-
-		hscif1: serial@e62c8000 {
-			compatible = "renesas,hscif-r8a77470",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c8000 0 0x60>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 716>,
-				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
-			       <&dmac1 0x4d>, <&dmac1 0x4e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 716>;
-			status = "disabled";
-		};
-
-		hscif2: serial@e62d0000 {
-			compatible = "renesas,hscif-r8a77470",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62d0000 0 0x60>;
-			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 713>,
-				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
-			       <&dmac1 0x3b>, <&dmac1 0x3c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 713>;
-			status = "disabled";
-		};
-
-		pwm0: pwm@e6e30000 {
-			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
-			reg = <0 0xe6e30000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm1: pwm@e6e31000 {
-			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
-			reg = <0 0xe6e31000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm2: pwm@e6e32000 {
-			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
-			reg = <0 0xe6e32000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm3: pwm@e6e33000 {
-			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
-			reg = <0 0xe6e33000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm4: pwm@e6e34000 {
-			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
-			reg = <0 0xe6e34000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm5: pwm@e6e35000 {
-			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
-			reg = <0 0xe6e35000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm6: pwm@e6e36000 {
-			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
-			reg = <0 0xe6e36000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		vin0: video@e6ef0000 {
-			compatible = "renesas,vin-r8a77470",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef0000 0 0x1000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 811>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 811>;
-			status = "disabled";
-		};
-
-		vin1: video@e6ef1000 {
-			compatible = "renesas,vin-r8a77470",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef1000 0 0x1000>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 810>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 810>;
-			status = "disabled";
-		};
-
-		ohci0: usb@ee080000 {
-			compatible = "generic-ohci";
-			reg = <0 0xee080000 0 0x100>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			phys = <&usb0 0>, <&usb2_phy0>;
-			phy-names = "usb";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-		};
-
-		ehci0: usb@ee080100 {
-			compatible = "generic-ehci";
-			reg = <0 0xee080100 0 0x100>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			phys = <&usb0 0>, <&usb2_phy0>;
-			phy-names = "usb";
-			companion = <&ohci0>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-		};
-
-		usb2_phy0: usb-phy@ee080200 {
-			compatible = "renesas,usb2-phy-r8a77470";
-			reg = <0 0xee080200 0 0x700>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		ohci1: usb@ee0c0000 {
-			compatible = "generic-ohci";
-			reg = <0 0xee0c0000 0 0x100>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 705>;
-			phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>;
-			phy-names = "usb";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 705>;
-			status = "disabled";
-		};
-
-		ehci1: usb@ee0c0100 {
-			compatible = "generic-ehci";
-			reg = <0 0xee0c0100 0 0x100>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 705>;
-			phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>;
-			phy-names = "usb";
-			companion = <&ohci1>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 705>;
-			status = "disabled";
-		};
-
-		usb2_phy1: usb-phy@ee0c0200 {
-			compatible = "renesas,usb2-phy-r8a77470";
-			reg = <0 0xee0c0200 0 0x700>;
-			clocks = <&cpg CPG_MOD 705>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 705>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		sdhi0: mmc@ee100000 {
-			compatible = "renesas,sdhi-r8a77470",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee100000 0 0x328>;
-			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
-			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
-			       <&dmac1 0xcd>, <&dmac1 0xce>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <156000000>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 314>;
-			status = "disabled";
-		};
-
-		sdhi1: mmc@ee300000 {
-			compatible = "renesas,sdhi-mmc-r8a77470";
-			reg = <0 0xee300000 0 0x2000>;
-			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 313>;
-			max-frequency = <156000000>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 313>;
-			status = "disabled";
-		};
-
-		sdhi2: mmc@ee160000 {
-			compatible = "renesas,sdhi-r8a77470",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee160000 0 0x328>;
-			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
-			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
-			       <&dmac1 0xd3>, <&dmac1 0xd4>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <78000000>;
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 312>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@f1001000 {
-			compatible = "arm,gic-400";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
-			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&cpg CPG_MOD 408>;
-			clock-names = "clk";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 408>;
-		};
-
-		du: display@feb00000 {
-			compatible = "renesas,du-r8a77470";
-			reg = <0 0xfeb00000 0 0x40000>;
-			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
-			clock-names = "du.0", "du.1";
-			resets = <&cpg 724>;
-			reset-names = "du.0";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					du_out_rgb0: endpoint {
-					};
-				};
-				port@1 {
-					reg = <1>;
-					du_out_rgb1: endpoint {
-					};
-				};
-				port@2 {
-					reg = <2>;
-					du_out_lvds0: endpoint {
-					};
-				};
-			};
-		};
-
-		prr: chipid@ff000044 {
-			compatible = "renesas,prr";
-			reg = <0 0xff000044 0 4>;
-		};
-
-		cmt0: timer@ffca0000 {
-			compatible = "renesas,r8a77470-cmt0",
-				     "renesas,rcar-gen2-cmt0";
-			reg = <0 0xffca0000 0 0x1004>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 124>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 124>;
-			status = "disabled";
-		};
-
-		cmt1: timer@e6130000 {
-			compatible = "renesas,r8a77470-cmt1",
-				     "renesas,rcar-gen2-cmt1";
-			reg = <0 0xe6130000 0 0x1004>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 329>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-			resets = <&cpg 329>;
-			status = "disabled";
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	/* External USB clock - can be overridden by the board */
-	usb_extal_clk: usb_extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <48000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
deleted file mode 100644
index 9b65d246e5836..0000000000000
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ /dev/null
@@ -1,229 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Reference Device Tree Source for the R-Car M1A (R8A77781) Bock-W board
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- */
-
-/dts-v1/;
-#include "r8a7778.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "bockw";
-	compatible = "renesas,bockw", "renesas,r8a7778";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x10000000>;
-	};
-
-	fixedregulator3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&ak4643>;
-			system-clock-frequency = <11289600>;
-		};
-	};
-};
-
-&bsc {
-	ethernet@18300000 {
-		compatible = "smsc,lan89218", "smsc,lan9115";
-		reg = <0x18300000 0x1000>;
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <33333333>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	ak4643: codec@12 {
-		compatible = "asahi-kasei,ak4643";
-		#sound-dai-cells = <0>;
-		reg = <0x12>;
-	};
-
-	camera@41 {
-		compatible = "oki,ml86v7667";
-		reg = <0x41>;
-	};
-
-	camera@43 {
-		compatible = "oki,ml86v7667";
-		reg = <0x43>;
-	};
-
-	rx8581: rtc@51 {
-		compatible = "epson,rx8581";
-		reg = <0x51>;
-	};
-};
-
-&mmcif {
-	pinctrl-0 = <&mmc_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <8>;
-	broken-cd;
-	status = "okay";
-};
-
-&irqpin {
-	status = "okay";
-};
-
-&tmu0 {
-	status = "okay";
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	scif0_pins: scif0 {
-		groups = "scif0_data_a", "scif0_ctrl";
-		function = "scif0";
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk";
-		function = "scif_clk";
-	};
-
-	mmc_pins: mmc {
-		groups = "mmc_data8", "mmc_ctrl";
-		function = "mmc";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-	};
-	sdhi0_pup_pins: sd0_pup {
-		groups = "sdhi0_cd", "sdhi0_wp";
-		function = "sdhi0";
-		bias-pull-up;
-	};
-
-	hspi0_pins: hspi0 {
-		groups = "hspi0_a";
-		function = "hspi0";
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
-	};
-
-	vin0_pins: vin0 {
-		groups = "vin0_data8", "vin0_clk";
-		function = "vin0";
-	};
-
-	vin1_pins: vin1 {
-		groups = "vin1_data8", "vin1_clk";
-		function = "vin1";
-	};
-};
-
-&rcar_sound {
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>, <&sdhi0_pup_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <4>;
-	status = "okay";
-	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-};
-
-&hspi0 {
-	pinctrl-0 = <&hspi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "spansion,s25fl008k", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "data(spi)";
-				reg = <0x00000000 0x00100000>;
-			};
-		};
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
-};
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
deleted file mode 100644
index 8d4530ed2fc6a..0000000000000
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ /dev/null
@@ -1,671 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Car M1A (R8A77781) SoC
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- */
-
-#include <dt-bindings/clock/r8a7778-clock.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a7778";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			clock-frequency = <800000000>;
-			clocks = <&z_clk>;
-		};
-	};
-
-	aliases {
-		spi0 = &hspi0;
-		spi1 = &hspi1;
-		spi2 = &hspi2;
-	};
-
-	bsc: bus@1c000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0x1c000000>;
-	};
-
-	ether: ethernet@fde00000 {
-		compatible = "renesas,ether-r8a7778",
-			     "renesas,rcar-gen1-ether";
-		reg = <0xfde00000 0x400>;
-		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7778_CLK_ETHER>;
-		power-domains = <&cpg_clocks>;
-		phy-mode = "rmii";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	gic: interrupt-controller@fe438000 {
-		compatible = "arm,pl390";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xfe438000 0x1000>,
-		      <0xfe430000 0x100>;
-	};
-
-	/* irqpin: IRQ0 - IRQ3 */
-	irqpin: interrupt-controller@fe78001c {
-		compatible = "renesas,intc-irqpin-r8a7778", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		status = "disabled"; /* default off */
-		reg =	<0xfe78001c 4>,
-			<0xfe780010 4>,
-			<0xfe780024 4>,
-			<0xfe780044 4>,
-			<0xfe780064 4>,
-			<0xfe780000 4>;
-		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-		sense-bitfield-width = <2>;
-	};
-
-	gpio0: gpio@ffc40000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
-		reg = <0xffc40000 0x2c>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 0 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio1: gpio@ffc41000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
-		reg = <0xffc41000 0x2c>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio2: gpio@ffc42000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
-		reg = <0xffc42000 0x2c>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio3: gpio@ffc43000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
-		reg = <0xffc43000 0x2c>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 96 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio4: gpio@ffc44000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
-		reg = <0xffc44000 0x2c>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 128 27>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	pfc: pinctrl@fffc0000 {
-		compatible = "renesas,pfc-r8a7778";
-		reg = <0xfffc0000 0x118>;
-	};
-
-	i2c0: i2c@ffc70000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c";
-		reg = <0xffc70000 0x1000>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_I2C0>;
-		power-domains = <&cpg_clocks>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@ffc71000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c";
-		reg = <0xffc71000 0x1000>;
-		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_I2C1>;
-		power-domains = <&cpg_clocks>;
-		i2c-scl-internal-delay-ns = <5>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@ffc72000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c";
-		reg = <0xffc72000 0x1000>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_I2C2>;
-		power-domains = <&cpg_clocks>;
-		i2c-scl-internal-delay-ns = <5>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@ffc73000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c";
-		reg = <0xffc73000 0x1000>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_I2C3>;
-		power-domains = <&cpg_clocks>;
-		i2c-scl-internal-delay-ns = <5>;
-		status = "disabled";
-	};
-
-	tmu0: timer@ffd80000 {
-		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
-		reg = <0xffd80000 0x30>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_TMU0>;
-		clock-names = "fck";
-		power-domains = <&cpg_clocks>;
-
-		#renesas,channels = <3>;
-
-		status = "disabled";
-	};
-
-	tmu1: timer@ffd81000 {
-		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
-		reg = <0xffd81000 0x30>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_TMU1>;
-		clock-names = "fck";
-		power-domains = <&cpg_clocks>;
-
-		#renesas,channels = <3>;
-
-		status = "disabled";
-	};
-
-	tmu2: timer@ffd82000 {
-		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
-		reg = <0xffd82000 0x30>;
-		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_TMU2>;
-		clock-names = "fck";
-		power-domains = <&cpg_clocks>;
-
-		#renesas,channels = <3>;
-
-		status = "disabled";
-	};
-
-	rcar_sound: sound@ffd90000 {
-		/*
-		 * #sound-dai-cells is required if simple-card
-		 *
-		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
-		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
-		 */
-		compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1";
-		reg =	<0xffd90000 0x1000>,	/* SRU */
-			<0xffd91000 0x240>,	/* SSI */
-			<0xfffe0000 0x24>;	/* ADG */
-		clocks = <&mstp3_clks R8A7778_CLK_SSI8>,
-			<&mstp3_clks R8A7778_CLK_SSI7>,
-			<&mstp3_clks R8A7778_CLK_SSI6>,
-			<&mstp3_clks R8A7778_CLK_SSI5>,
-			<&mstp3_clks R8A7778_CLK_SSI4>,
-			<&mstp0_clks R8A7778_CLK_SSI3>,
-			<&mstp0_clks R8A7778_CLK_SSI2>,
-			<&mstp0_clks R8A7778_CLK_SSI1>,
-			<&mstp0_clks R8A7778_CLK_SSI0>,
-			<&mstp5_clks R8A7778_CLK_SRU_SRC8>,
-			<&mstp5_clks R8A7778_CLK_SRU_SRC7>,
-			<&mstp5_clks R8A7778_CLK_SRU_SRC6>,
-			<&mstp5_clks R8A7778_CLK_SRU_SRC5>,
-			<&mstp5_clks R8A7778_CLK_SRU_SRC4>,
-			<&mstp5_clks R8A7778_CLK_SRU_SRC3>,
-			<&mstp5_clks R8A7778_CLK_SRU_SRC2>,
-			<&mstp5_clks R8A7778_CLK_SRU_SRC1>,
-			<&mstp5_clks R8A7778_CLK_SRU_SRC0>,
-			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
-			<&cpg_clocks R8A7778_CLK_S1>;
-		clock-names = "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4",
-			"ssi.3", "ssi.2", "ssi.1", "ssi.0",
-			"src.8", "src.7", "src.6", "src.5", "src.4",
-			"src.3", "src.2", "src.1", "src.0",
-			"clk_a", "clk_b", "clk_c", "clk_i";
-
-		status = "disabled";
-
-		rcar_sound,src {
-			src3: src-3 { };
-			src4: src-4 { };
-			src5: src-5 { };
-			src6: src-6 { };
-			src7: src-7 { };
-			src8: src-8 { };
-			src9: src-9 { };
-		};
-
-		rcar_sound,ssi {
-			ssi3: ssi-3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi4: ssi-4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi5: ssi-5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi6: ssi-6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi7: ssi-7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi8: ssi-8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi9: ssi-9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-		};
-	};
-
-	scif0: serial@ffe40000 {
-		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
-			     "renesas,scif";
-		reg = <0xffe40000 0x100>;
-		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF0>,
-			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&cpg_clocks>;
-		status = "disabled";
-	};
-
-	scif1: serial@ffe41000 {
-		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
-			     "renesas,scif";
-		reg = <0xffe41000 0x100>;
-		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF1>,
-			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&cpg_clocks>;
-		status = "disabled";
-	};
-
-	scif2: serial@ffe42000 {
-		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
-			     "renesas,scif";
-		reg = <0xffe42000 0x100>;
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF2>,
-			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&cpg_clocks>;
-		status = "disabled";
-	};
-
-	scif3: serial@ffe43000 {
-		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
-			     "renesas,scif";
-		reg = <0xffe43000 0x100>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF3>,
-			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&cpg_clocks>;
-		status = "disabled";
-	};
-
-	scif4: serial@ffe44000 {
-		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
-			     "renesas,scif";
-		reg = <0xffe44000 0x100>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF4>,
-			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&cpg_clocks>;
-		status = "disabled";
-	};
-
-	scif5: serial@ffe45000 {
-		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
-			     "renesas,scif";
-		reg = <0xffe45000 0x100>;
-		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF5>,
-			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&cpg_clocks>;
-		status = "disabled";
-	};
-
-	hscif0: serial@ffe48000 {
-		compatible = "renesas,hscif-r8a7778",
-			     "renesas,rcar-gen1-hscif", "renesas,hscif";
-		reg = <0xffe48000 96>;
-		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_HSCIF0>,
-			 <&cpg_clocks R8A7778_CLK_S>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&cpg_clocks>;
-		status = "disabled";
-	};
-
-	hscif1: serial@ffe49000 {
-		compatible = "renesas,hscif-r8a7778",
-			     "renesas,rcar-gen1-hscif", "renesas,hscif";
-		reg = <0xffe49000 96>;
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_HSCIF1>,
-			 <&cpg_clocks R8A7778_CLK_S>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&cpg_clocks>;
-		status = "disabled";
-	};
-
-	mmcif: mmc@ffe4e000 {
-		compatible = "renesas,mmcif-r8a7778", "renesas,sh-mmcif";
-		reg = <0xffe4e000 0x100>;
-		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7778_CLK_MMC>;
-		power-domains = <&cpg_clocks>;
-		status = "disabled";
-	};
-
-	sdhi0: mmc@ffe4c000 {
-		compatible = "renesas,sdhi-r8a7778",
-			     "renesas,rcar-gen1-sdhi";
-		reg = <0xffe4c000 0x100>;
-		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
-		power-domains = <&cpg_clocks>;
-		status = "disabled";
-	};
-
-	sdhi1: mmc@ffe4d000 {
-		compatible = "renesas,sdhi-r8a7778",
-			     "renesas,rcar-gen1-sdhi";
-		reg = <0xffe4d000 0x100>;
-		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7778_CLK_SDHI1>;
-		power-domains = <&cpg_clocks>;
-		status = "disabled";
-	};
-
-	sdhi2: mmc@ffe4f000 {
-		compatible = "renesas,sdhi-r8a7778",
-			     "renesas,rcar-gen1-sdhi";
-		reg = <0xffe4f000 0x100>;
-		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7778_CLK_SDHI2>;
-		power-domains = <&cpg_clocks>;
-		status = "disabled";
-	};
-
-	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
-		reg = <0xfffc7000 0x18>;
-		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
-		power-domains = <&cpg_clocks>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	hspi1: spi@fffc8000 {
-		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
-		reg = <0xfffc8000 0x18>;
-		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
-		power-domains = <&cpg_clocks>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	hspi2: spi@fffc6000 {
-		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
-		reg = <0xfffc6000 0x18>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
-		power-domains = <&cpg_clocks>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* External input clock */
-		extal_clk: extal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		/* External SCIF clock */
-		scif_clk: scif {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			/* This value must be overridden by the board. */
-			clock-frequency = <0>;
-		};
-
-		/* Special CPG clocks */
-		cpg_clocks: cpg_clocks@ffc80000 {
-			compatible = "renesas,r8a7778-cpg-clocks";
-			reg = <0xffc80000 0x80>;
-			#clock-cells = <1>;
-			clocks = <&extal_clk>;
-			clock-output-names = "plla", "pllb", "b",
-					     "out", "p", "s", "s1";
-			#power-domain-cells = <0>;
-		};
-
-		/* Audio clocks; frequencies are set by boards if applicable. */
-		audio_clk_a: audio_clk_a {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-		audio_clk_b: audio_clk_b {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-		audio_clk_c: audio_clk_c {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		/* Fixed ratio clocks */
-		g_clk: g {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <12>;
-			clock-mult = <1>;
-		};
-		i_clk: i {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <1>;
-			clock-mult = <1>;
-		};
-		s3_clk: s3 {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-		s4_clk: s4 {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-		};
-		z_clk: z {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7778_CLK_PLLB>;
-			#clock-cells = <0>;
-			clock-div = <1>;
-			clock-mult = <1>;
-		};
-
-		/* Gate clocks */
-		mstp0_clks: mstp0_clks@ffc80030 {
-			compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xffc80030 4>;
-			clocks = <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_S>,
-				 <&cpg_clocks R8A7778_CLK_S>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_S>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7778_CLK_I2C0 R8A7778_CLK_I2C1
-				R8A7778_CLK_I2C2 R8A7778_CLK_I2C3
-				R8A7778_CLK_SCIF0 R8A7778_CLK_SCIF1
-				R8A7778_CLK_SCIF2 R8A7778_CLK_SCIF3
-				R8A7778_CLK_SCIF4 R8A7778_CLK_SCIF5
-				R8A7778_CLK_HSCIF0 R8A7778_CLK_HSCIF1
-				R8A7778_CLK_TMU0 R8A7778_CLK_TMU1
-				R8A7778_CLK_TMU2 R8A7778_CLK_SSI0
-				R8A7778_CLK_SSI1 R8A7778_CLK_SSI2
-				R8A7778_CLK_SSI3 R8A7778_CLK_SRU
-				R8A7778_CLK_HSPI
-			>;
-			clock-output-names =
-				"i2c0", "i2c1", "i2c2", "i2c3", "scif0",
-				"scif1", "scif2", "scif3", "scif4", "scif5",
-				"hscif0", "hscif1",
-				"tmu0", "tmu1", "tmu2", "ssi0", "ssi1",
-				"ssi2", "ssi3", "sru", "hspi";
-		};
-		mstp1_clks: mstp1_clks@ffc80034 {
-			compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xffc80034 4>, <0xffc80044 4>;
-			clocks = <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_S>,
-				 <&cpg_clocks R8A7778_CLK_S>,
-				 <&cpg_clocks R8A7778_CLK_P>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7778_CLK_ETHER R8A7778_CLK_VIN0
-				R8A7778_CLK_VIN1 R8A7778_CLK_USB
-			>;
-			clock-output-names =
-				"ether", "vin0", "vin1", "usb";
-		};
-		mstp3_clks: mstp3_clks@ffc8003c {
-			compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xffc8003c 4>;
-			clocks = <&s4_clk>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7778_CLK_MMC R8A7778_CLK_SDHI0
-				R8A7778_CLK_SDHI1 R8A7778_CLK_SDHI2
-				R8A7778_CLK_SSI4 R8A7778_CLK_SSI5
-				R8A7778_CLK_SSI6 R8A7778_CLK_SSI7
-				R8A7778_CLK_SSI8
-			>;
-			clock-output-names =
-				"mmc", "sdhi0", "sdhi1", "sdhi2", "ssi4",
-				"ssi5", "ssi6", "ssi7", "ssi8";
-		};
-		mstp5_clks: mstp5_clks@ffc80054 {
-			compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xffc80054 4>;
-			clocks = <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>,
-				 <&cpg_clocks R8A7778_CLK_P>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7778_CLK_SRU_SRC0 R8A7778_CLK_SRU_SRC1
-				R8A7778_CLK_SRU_SRC2 R8A7778_CLK_SRU_SRC3
-				R8A7778_CLK_SRU_SRC4 R8A7778_CLK_SRU_SRC5
-				R8A7778_CLK_SRU_SRC6 R8A7778_CLK_SRU_SRC7
-				R8A7778_CLK_SRU_SRC8
-			>;
-			clock-output-names =
-				"sru-src0", "sru-src1", "sru-src2",
-				"sru-src3", "sru-src4", "sru-src5",
-				"sru-src6", "sru-src7", "sru-src8";
-		};
-	};
-
-	rst: reset-controller@ffcc0000 {
-		compatible = "renesas,r8a7778-reset-wdt";
-		reg = <0xffcc0000 0x40>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
deleted file mode 100644
index fd40890bd77bc..0000000000000
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ /dev/null
@@ -1,333 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Car H1 (R8A77790) Marzen board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- */
-
-/dts-v1/;
-#include "r8a7779.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "marzen";
-	compatible = "renesas,marzen", "renesas,r8a7779";
-
-	aliases {
-		serial0 = &scif2;
-		serial1 = &scif4;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	fixedregulator3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	ethernet@18000000 {
-		compatible = "smsc,lan89218", "smsc,lan9115";
-		reg = <0x18000000 0x100>;
-		pinctrl-0 = <&ethernet_pins>;
-		pinctrl-names = "default";
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin0>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		smsc,irq-push-pull;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
-
-	keyboard-irq {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keyboard_irq_pins>;
-		pinctrl-names = "default";
-
-		interrupt-parent = <&gpio0>;
-
-		key-1 {
-			interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
-			linux,code = <KEY_1>;
-			label = "SW1-1";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-2 {
-			interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
-			linux,code = <KEY_2>;
-			label = "SW1-2";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-	};
-
-	keyboard-gpio {
-		compatible = "gpio-keys-polled";
-		poll-interval = <50>;
-
-		pinctrl-0 = <&keyboard_gpio_pins>;
-		pinctrl-names = "default";
-
-		key-3 {
-			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_3>;
-			label = "SW1-3";
-			debounce-interval = <20>;
-		};
-		key-4 {
-			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_4>;
-			label = "SW1-4";
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led2 {
-			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-		};
-		led3 {
-			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		};
-		led4 {
-			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	vga-encoder {
-		compatible = "adi,adv7123";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				vga_enc_in: endpoint {
-					remote-endpoint = <&du_out_rgb0>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				vga_enc_out: endpoint {
-					remote-endpoint = <&vga_in>;
-				};
-			};
-		};
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_in: endpoint {
-				remote-endpoint = <&vga_enc_out>;
-			};
-		};
-	};
-
-	lvds-encoder {
-		compatible = "thine,thc63lvdm83d";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				lvds_enc_in: endpoint {
-					remote-endpoint = <&du_out_rgb1>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				lvds_connector: endpoint {
-				};
-			};
-		};
-	};
-
-	x3_clk: x3-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <65000000>;
-	};
-};
-
-&du {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>;
-	clock-names = "du.0", "dclkin.0";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&vga_enc_in>;
-			};
-		};
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lvds_enc_in>;
-			};
-		};
-	};
-};
-
-&gpio0 {
-	keyboard-irq-hog {
-		gpio-hog;
-		gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>;
-		input;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	clock-frequency = <100000>;
-};
-
-&irqpin0 {
-	status = "okay";
-};
-
-&extal_clk {
-	clock-frequency = <31250000>;
-};
-
-&tmu0 {
-	status = "okay";
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	du_pins: du {
-		du0 {
-			groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0", "du0_clk_in";
-			function = "du0";
-		};
-		du1 {
-			groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
-			function = "du1";
-		};
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk_b";
-		function = "scif_clk";
-	};
-
-	ethernet_pins: ethernet {
-		intc {
-			groups = "intc_irq1_b";
-			function = "intc";
-		};
-		lbsc {
-			groups = "lbsc_ex_cs0";
-			function = "lbsc";
-		};
-	};
-
-	scif2_pins: scif2 {
-		groups = "scif2_data_c";
-		function = "scif2";
-	};
-
-	scif4_pins: scif4 {
-		groups = "scif4_data";
-		function = "scif4";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
-		function = "sdhi0";
-	};
-
-	hspi0_pins: hspi0 {
-		groups = "hspi0";
-		function = "hspi0";
-	};
-
-	keyboard_irq_pins: keyboard-irq {
-		pins = "GP_0_17", "GP_0_18";
-		bias-pull-up;
-	};
-	keyboard_gpio_pins: keyboard-gpio {
-		pins = "GP_0_19", "GP_0_20";
-		bias-pull-up;
-	};
-};
-
-&sata {
-	status = "okay";
-};
-
-&scif2 {
-	pinctrl-0 = <&scif2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif4 {
-	pinctrl-0 = <&scif4_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&hspi0 {
-	pinctrl-0 = <&hspi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
deleted file mode 100644
index 97b767d81d926..0000000000000
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ /dev/null
@@ -1,717 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Car H1 (R8A77790) SoC
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- */
-
-#include <dt-bindings/clock/r8a7779-clock.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/power/r8a7779-sysc.h>
-
-/ {
-	compatible = "renesas,r8a7779";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-			clocks = <&cpg_clocks R8A7779_CLK_Z>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			clock-frequency = <1000000000>;
-			clocks = <&cpg_clocks R8A7779_CLK_Z>;
-			power-domains = <&sysc R8A7779_PD_ARM1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <2>;
-			clock-frequency = <1000000000>;
-			clocks = <&cpg_clocks R8A7779_CLK_Z>;
-			power-domains = <&sysc R8A7779_PD_ARM2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <3>;
-			clock-frequency = <1000000000>;
-			clocks = <&cpg_clocks R8A7779_CLK_Z>;
-			power-domains = <&sysc R8A7779_PD_ARM3>;
-		};
-	};
-
-	aliases {
-		spi0 = &hspi0;
-		spi1 = &hspi1;
-		spi2 = &hspi2;
-	};
-
-	gic: interrupt-controller@f0001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xf0001000 0x1000>,
-		      <0xf0000100 0x100>;
-	};
-
-	timer@f0000200 {
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0xf0000200 0x100>;
-		interrupts = <GIC_PPI 11
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-		clocks = <&cpg_clocks R8A7779_CLK_ZS>;
-	};
-
-	timer@f0000600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0xf0000600 0x20>;
-		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-		clocks = <&cpg_clocks R8A7779_CLK_ZS>;
-	};
-
-	gpio0: gpio@ffc40000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
-		reg = <0xffc40000 0x2c>;
-		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 0 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio1: gpio@ffc41000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
-		reg = <0xffc41000 0x2c>;
-		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio2: gpio@ffc42000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
-		reg = <0xffc42000 0x2c>;
-		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio3: gpio@ffc43000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
-		reg = <0xffc43000 0x2c>;
-		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 96 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio4: gpio@ffc44000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
-		reg = <0xffc44000 0x2c>;
-		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 128 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio5: gpio@ffc45000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
-		reg = <0xffc45000 0x2c>;
-		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 160 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio6: gpio@ffc46000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
-		reg = <0xffc46000 0x2c>;
-		interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 192 9>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	irqpin0: interrupt-controller@fe78001c {
-		compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		status = "disabled";
-		interrupt-controller;
-		reg = <0xfe78001c 4>,
-			<0xfe780010 4>,
-			<0xfe780024 4>,
-			<0xfe780044 4>,
-			<0xfe780064 4>,
-			<0xfe780000 4>;
-		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-		sense-bitfield-width = <2>;
-	};
-
-	i2c0: i2c@ffc70000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c";
-		reg = <0xffc70000 0x1000>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@ffc71000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c";
-		reg = <0xffc71000 0x1000>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		i2c-scl-internal-delay-ns = <5>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@ffc72000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c";
-		reg = <0xffc72000 0x1000>;
-		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		i2c-scl-internal-delay-ns = <5>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@ffc73000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c";
-		reg = <0xffc73000 0x1000>;
-		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		i2c-scl-internal-delay-ns = <5>;
-		status = "disabled";
-	};
-
-	scif0: serial@ffe40000 {
-		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
-			     "renesas,scif";
-		reg = <0xffe40000 0x100>;
-		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF0>,
-			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	scif1: serial@ffe41000 {
-		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
-			     "renesas,scif";
-		reg = <0xffe41000 0x100>;
-		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF1>,
-			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	scif2: serial@ffe42000 {
-		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
-			     "renesas,scif";
-		reg = <0xffe42000 0x100>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF2>,
-			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	scif3: serial@ffe43000 {
-		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
-			     "renesas,scif";
-		reg = <0xffe43000 0x100>;
-		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF3>,
-			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	scif4: serial@ffe44000 {
-		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
-			     "renesas,scif";
-		reg = <0xffe44000 0x100>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF4>,
-			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	scif5: serial@ffe45000 {
-		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
-			     "renesas,scif";
-		reg = <0xffe45000 0x100>;
-		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF5>,
-			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	hscif0: serial@ffe48000 {
-		compatible = "renesas,hscif-r8a7779",
-			     "renesas,rcar-gen1-hscif", "renesas,hscif";
-		reg = <0xffe48000 96>;
-		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_HSCIF0>,
-			 <&cpg_clocks R8A7779_CLK_S>,
-			 <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	hscif1: serial@ffe49000 {
-		compatible = "renesas,hscif-r8a7779",
-			     "renesas,rcar-gen1-hscif", "renesas,hscif";
-		reg = <0xffe49000 96>;
-		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_HSCIF1>,
-			 <&cpg_clocks R8A7779_CLK_S>,
-			 <&scif_clk>;
-		clock-names = "fck", "brg_int", "scif_clk";
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	pwm0: pwm@ffe50000 {
-		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
-		reg = <0xffe50000 0x8>;
-		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		#pwm-cells = <2>;
-		status = "disabled";
-	};
-
-	pwm1: pwm@ffe51000 {
-		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
-		reg = <0xffe51000 0x8>;
-		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		#pwm-cells = <2>;
-		status = "disabled";
-	};
-
-	pwm2: pwm@ffe52000 {
-		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
-		reg = <0xffe52000 0x8>;
-		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		#pwm-cells = <2>;
-		status = "disabled";
-	};
-
-	pwm3: pwm@ffe53000 {
-		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
-		reg = <0xffe53000 0x8>;
-		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		#pwm-cells = <2>;
-		status = "disabled";
-	};
-
-	pwm4: pwm@ffe54000 {
-		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
-		reg = <0xffe54000 0x8>;
-		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		#pwm-cells = <2>;
-		status = "disabled";
-	};
-
-	pwm5: pwm@ffe55000 {
-		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
-		reg = <0xffe55000 0x8>;
-		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		#pwm-cells = <2>;
-		status = "disabled";
-	};
-
-	pwm6: pwm@ffe56000 {
-		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
-		reg = <0xffe56000 0x8>;
-		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		#pwm-cells = <2>;
-		status = "disabled";
-	};
-
-	pfc: pinctrl@fffc0000 {
-		compatible = "renesas,pfc-r8a7779";
-		reg = <0xfffc0000 0x23c>;
-	};
-
-	thermal@ffc48000 {
-		compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
-		reg = <0xffc48000 0x38>;
-	};
-
-	tmu0: timer@ffd80000 {
-		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
-		reg = <0xffd80000 0x30>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
-		clock-names = "fck";
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-
-		#renesas,channels = <3>;
-
-		status = "disabled";
-	};
-
-	tmu1: timer@ffd81000 {
-		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
-		reg = <0xffd81000 0x30>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
-		clock-names = "fck";
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-
-		#renesas,channels = <3>;
-
-		status = "disabled";
-	};
-
-	tmu2: timer@ffd82000 {
-		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
-		reg = <0xffd82000 0x30>;
-		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
-		clock-names = "fck";
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-
-		#renesas,channels = <3>;
-
-		status = "disabled";
-	};
-
-	sata: sata@fc600000 {
-		compatible = "renesas,sata-r8a7779";
-		reg = <0xfc600000 0x200000>;
-		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	sdhi0: mmc@ffe4c000 {
-		compatible = "renesas,sdhi-r8a7779",
-			     "renesas,rcar-gen1-sdhi";
-		reg = <0xffe4c000 0x100>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	sdhi1: mmc@ffe4d000 {
-		compatible = "renesas,sdhi-r8a7779",
-			     "renesas,rcar-gen1-sdhi";
-		reg = <0xffe4d000 0x100>;
-		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	sdhi2: mmc@ffe4e000 {
-		compatible = "renesas,sdhi-r8a7779",
-			     "renesas,rcar-gen1-sdhi";
-		reg = <0xffe4e000 0x100>;
-		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	sdhi3: mmc@ffe4f000 {
-		compatible = "renesas,sdhi-r8a7779",
-			     "renesas,rcar-gen1-sdhi";
-		reg = <0xffe4f000 0x100>;
-		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
-		reg = <0xfffc7000 0x18>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	hspi1: spi@fffc8000 {
-		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
-		reg = <0xfffc8000 0x18>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	hspi2: spi@fffc6000 {
-		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
-		reg = <0xfffc6000 0x18>;
-		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-	};
-
-	du: display@fff80000 {
-		compatible = "renesas,du-r8a7779";
-		reg = <0xfff80000 0x40000>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7779_CLK_DU>;
-		clock-names = "du.0";
-		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
-		status = "disabled";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				du_out_rgb0: endpoint {
-				};
-			};
-			port@1 {
-				reg = <1>;
-				du_out_rgb1: endpoint {
-				};
-			};
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* External root clock */
-		extal_clk: extal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			/* This value must be overriden by the board. */
-			clock-frequency = <0>;
-		};
-
-		/* External SCIF clock */
-		scif_clk: scif {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			/* This value must be overridden by the board. */
-			clock-frequency = <0>;
-		};
-
-		/* Special CPG clocks */
-		cpg_clocks: clocks@ffc80000 {
-			compatible = "renesas,r8a7779-cpg-clocks";
-			reg = <0xffc80000 0x30>;
-			clocks = <&extal_clk>;
-			#clock-cells = <1>;
-			clock-output-names = "plla", "z", "zs", "s",
-					     "s1", "p", "b", "out";
-			#power-domain-cells = <0>;
-		};
-
-		/* Fixed factor clocks */
-		i_clk: i {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-		s3_clk: s3 {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-		};
-		s4_clk: s4 {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <16>;
-			clock-mult = <1>;
-		};
-		g_clk: g {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <24>;
-			clock-mult = <1>;
-		};
-
-		/* Gate clocks */
-		mstp0_clks: clocks@ffc80030 {
-			compatible = "renesas,r8a7779-mstp-clocks",
-				     "renesas,cpg-mstp-clocks";
-			reg = <0xffc80030 4>;
-			clocks = <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7779_CLK_PWM R8A7779_CLK_HSPI
-				R8A7779_CLK_TMU2 R8A7779_CLK_TMU1
-				R8A7779_CLK_TMU0 R8A7779_CLK_HSCIF1
-				R8A7779_CLK_HSCIF0 R8A7779_CLK_SCIF5
-				R8A7779_CLK_SCIF4 R8A7779_CLK_SCIF3
-				R8A7779_CLK_SCIF2 R8A7779_CLK_SCIF1
-				R8A7779_CLK_SCIF0 R8A7779_CLK_I2C3
-				R8A7779_CLK_I2C2 R8A7779_CLK_I2C1
-				R8A7779_CLK_I2C0
-			>;
-			clock-output-names =
-				"pwm", "hspi", "tmu2", "tmu1", "tmu0",
-				"hscif1", "hscif0", "scif5", "scif4", "scif3",
-				"scif2", "scif1", "scif0", "i2c3", "i2c2",
-				"i2c1", "i2c0";
-		};
-		mstp1_clks: clocks@ffc80034 {
-			compatible = "renesas,r8a7779-mstp-clocks",
-				     "renesas,cpg-mstp-clocks";
-			reg = <0xffc80034 4>, <0xffc80044 4>;
-			clocks = <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_S>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7779_CLK_USB01 R8A7779_CLK_USB2
-				R8A7779_CLK_DU R8A7779_CLK_VIN2
-				R8A7779_CLK_VIN1 R8A7779_CLK_VIN0
-				R8A7779_CLK_ETHER R8A7779_CLK_SATA
-				R8A7779_CLK_PCIE R8A7779_CLK_VIN3
-			>;
-			clock-output-names =
-				"usb01", "usb2",
-				"du", "vin2",
-				"vin1", "vin0",
-				"ether", "sata",
-				"pcie", "vin3";
-		};
-		mstp3_clks: clocks@ffc8003c {
-			compatible = "renesas,r8a7779-mstp-clocks",
-				     "renesas,cpg-mstp-clocks";
-			reg = <0xffc8003c 4>;
-			clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>,
-				 <&s4_clk>, <&s4_clk>;
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2
-				R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0
-				R8A7779_CLK_MMC1 R8A7779_CLK_MMC0
-			>;
-			clock-output-names =
-				"sdhi3", "sdhi2", "sdhi1", "sdhi0",
-				"mmc1", "mmc0";
-		};
-	};
-
-	prr: chipid@ff000044 {
-		compatible = "renesas,prr";
-		reg = <0xff000044 4>;
-	};
-
-	rst: reset-controller@ffcc0000 {
-		compatible = "renesas,r8a7779-reset-wdt";
-		reg = <0xffcc0000 0x48>;
-	};
-
-	sysc: system-controller@ffd85000 {
-		compatible = "renesas,r8a7779-sysc";
-		reg = <0xffd85000 0x0200>;
-		#power-domain-cells = <1>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
deleted file mode 100644
index 5ad5349a50dc9..0000000000000
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ /dev/null
@@ -1,947 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Lager board
- *
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- * Copyright (C) 2015-2016 Renesas Electronics Corporation
- */
-
-/*
- * SSI-AK4643
- *
- * SW1: 1: AK4643
- *      2: CN22
- *      3: ADV7511
- *
- * This command is required when Playback/Capture
- *
- *	amixer set "LINEOUT Mixer DACL" on
- *	amixer set "DVC Out" 100%
- *	amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- *	amixer set "DVC Out Mute" on
- *	amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
- *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- *	amixer set "DVC Out Ramp" on
- *	aplay xxx.wav &
- *	amixer set "DVC Out"  80%  // Volume Down
- *	amixer set "DVC Out" 100%  // Volume Up
- */
-
-/dts-v1/;
-#include "r8a7790.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Lager";
-	compatible = "renesas,lager", "renesas,r8a7790";
-
-	aliases {
-		serial0 = &scif0;
-		serial1 = &scifa1;
-		i2c8 = &gpioi2c1;
-		i2c9 = &gpioi2c2;
-		i2c10 = &i2cexio0;
-		i2c11 = &i2cexio1;
-		i2c12 = &i2chdmi;
-		i2c13 = &i2cpwr;
-		mmc0 = &mmcif1;
-		mmc1 = &sdhi0;
-		mmc2 = &sdhi2;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@140000000 {
-		device_type = "memory";
-		reg = <1 0x40000000 0 0xc0000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keyboard_pins>;
-		pinctrl-names = "default";
-
-		one {
-			linux,code = <KEY_1>;
-			label = "SW2-1";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-		two {
-			linux,code = <KEY_2>;
-			label = "SW2-2";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-		};
-		three {
-			linux,code = <KEY_3>;
-			label = "SW2-3";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		};
-		four {
-			linux,code = <KEY_4>;
-			label = "SW2-4";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-		};
-		led7 {
-			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
-		};
-		led8 {
-			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fixedregulator3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_sdhi0: regulator-vcc-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vcc_sdhi2: regulator-vcc-sdhi2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi2: regulator-vccq-sdhi2 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	audio_clock: audio_clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <11289600>;
-	};
-
-	rsnd_ak4643: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&ak4643>;
-			clocks = <&audio_clock>;
-		};
-	};
-
-	vga-encoder {
-		compatible = "adi,adv7123";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7123_in: endpoint {
-					remote-endpoint = <&du_out_rgb>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				adv7123_out: endpoint {
-					remote-endpoint = <&vga_in>;
-				};
-			};
-		};
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_in: endpoint {
-				remote-endpoint = <&adv7123_out>;
-			};
-		};
-	};
-
-	hdmi-in {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&adv7612_in>;
-			};
-		};
-	};
-
-	cec_clock: cec-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_out: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-
-	x2_clk: x2-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <148500000>;
-	};
-
-	x13_clk: x13-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <148500000>;
-	};
-
-	gpioi2c1: i2c-8 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	gpioi2c2: i2c-9 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	/*
-	 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
-	 * We use the I2C demuxer, so the desired IP core can be selected at runtime
-	 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
-	 * Note: For testing the I2C slave feature, it is convenient to connect this
-	 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
-	 * instantiate the slave device at runtime according to the documentation.
-	 * You can then communicate with the slave via IIC3.
-	 *
-	 * IIC0/I2C0 does not appear to support fallback to GPIO.
-	 */
-	i2cexio0: i2c-10 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&iic0>, <&i2c0>;
-		i2c-bus-name = "i2c-exio0";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	/*
-	 * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
-	 * This is similar to the arangement described for i2cexio0 (above)
-	 * with a fallback to GPIO also provided.
-	 */
-	i2cexio1: i2c-11 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
-		i2c-bus-name = "i2c-exio1";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	/*
-	 * IIC2 and I2C2 may be switched using pinmux.
-	 * A fallback to GPIO is also provided.
-	 */
-	i2chdmi: i2c-12 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
-		i2c-bus-name = "i2c-hdmi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ak4643: codec@12 {
-			compatible = "asahi-kasei,ak4643";
-			#sound-dai-cells = <0>;
-			reg = <0x12>;
-		};
-
-		composite-in@20 {
-			compatible = "adi,adv7180";
-			reg = <0x20>;
-
-			port {
-				adv7180: endpoint {
-					bus-width = <8>;
-					remote-endpoint = <&vin1ep0>;
-				};
-			};
-		};
-
-		hdmi@39 {
-			compatible = "adi,adv7511w";
-			reg = <0x39>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&cec_clock>;
-			clock-names = "cec";
-
-			adi,input-depth = <8>;
-			adi,input-colorspace = "rgb";
-			adi,input-clock = "1x";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7511_in: endpoint {
-						remote-endpoint = <&lvds0_out>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					adv7511_out: endpoint {
-						remote-endpoint = <&hdmi_con_out>;
-					};
-				};
-			};
-		};
-
-		hdmi-in@4c {
-			compatible = "adi,adv7612";
-			reg = <0x4c>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
-			default-input = <0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7612_in: endpoint {
-						remote-endpoint = <&hdmi_con_in>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					adv7612_out: endpoint {
-						remote-endpoint = <&vin0ep2>;
-					};
-				};
-			};
-		};
-	};
-
-	/*
-	 * IIC3 and I2C3 may be switched using pinmux.
-	 * IIC3/I2C3 does not appear to support fallback to GPIO.
-	 */
-	i2cpwr: i2c-13 {
-		compatible = "i2c-demux-pinctrl";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_irq_pins>;
-		i2c-parent = <&iic3>, <&i2c3>;
-		i2c-bus-name = "i2c-pwr";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmic@58 {
-			compatible = "dlg,da9063";
-			reg = <0x58>;
-			interrupt-parent = <&irqc0>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
-
-			rtc {
-				compatible = "dlg,da9063-rtc";
-			};
-
-			watchdog {
-				compatible = "dlg,da9063-watchdog";
-			};
-		};
-
-		vdd_dvfs: regulator@68 {
-			compatible = "dlg,da9210";
-			reg = <0x68>;
-			interrupt-parent = <&irqc0>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
-
-&du {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
-		 <&x13_clk>, <&x2_clk>;
-	clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7123_in>;
-			};
-		};
-	};
-};
-
-&lvds0 {
-	status = "okay";
-
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&adv7511_in>;
-			};
-		};
-	};
-};
-
-&lvds1 {
-	ports {
-		port@1 {
-			lvds_connector: endpoint {
-			};
-		};
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	du_pins: du {
-		groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
-		function = "du";
-	};
-
-	scif0_pins: scif0 {
-		groups = "scif0_data";
-		function = "scif0";
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk";
-		function = "scif_clk";
-	};
-
-	ether_pins: ether {
-		groups = "eth_link", "eth_mdio", "eth_rmii";
-		function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		groups = "intc_irq0";
-		function = "intc";
-	};
-
-	scifa1_pins: scifa1 {
-		groups = "scifa1_data";
-		function = "scifa1";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <3300>;
-	};
-
-	sdhi0_pins_uhs: sd0_uhs {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <1800>;
-	};
-
-	sdhi2_pins: sd2 {
-		groups = "sdhi2_data4", "sdhi2_ctrl";
-		function = "sdhi2";
-		power-source = <3300>;
-	};
-
-	sdhi2_pins_uhs: sd2_uhs {
-		groups = "sdhi2_data4", "sdhi2_ctrl";
-		function = "sdhi2";
-		power-source = <1800>;
-	};
-
-	mmc1_pins: mmc1 {
-		groups = "mmc1_data8", "mmc1_ctrl";
-		function = "mmc1";
-	};
-
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data4";
-		function = "qspi";
-	};
-
-	msiof1_pins: msiof1 {
-		groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
-				 "msiof1_tx";
-		function = "msiof1";
-	};
-
-	i2c0_pins: i2c0 {
-		groups = "i2c0";
-		function = "i2c0";
-	};
-
-	iic0_pins: iic0 {
-		groups = "iic0";
-		function = "iic0";
-	};
-
-	i2c1_pins: i2c1 {
-		groups = "i2c1";
-		function = "i2c1";
-	};
-
-	iic1_pins: iic1 {
-		groups = "iic1";
-		function = "iic1";
-	};
-
-	i2c2_pins: i2c2 {
-		groups = "i2c2";
-		function = "i2c2";
-	};
-
-	iic2_pins: iic2 {
-		groups = "iic2";
-		function = "iic2";
-	};
-
-	i2c3_pins: i2c3 {
-		groups = "i2c3";
-		function = "i2c3";
-	};
-
-	iic3_pins: iic3 {
-		groups = "iic3";
-		function = "iic3";
-	};
-
-	pmic_irq_pins: pmicirq {
-		groups = "intc_irq2";
-		function = "intc";
-	};
-
-	hsusb_pins: hsusb {
-		groups = "usb0_ovc_vbus";
-		function = "usb0";
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
-	};
-
-	usb2_pins: usb2 {
-		groups = "usb2";
-		function = "usb2";
-	};
-
-	vin0_pins: vin0 {
-		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
-		function = "vin0";
-	};
-
-	vin1_pins: vin1 {
-		groups = "vin1_data8", "vin1_clk";
-		function = "vin1";
-	};
-
-	sound_pins: sound {
-		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
-		function = "ssi";
-	};
-
-	sound_clk_pins: sound_clk {
-		groups = "audio_clk_a";
-		function = "audio_clk";
-	};
-
-	keyboard_pins: keyboard {
-		pins = "GP_1_14", "GP_1_24", "GP_1_26", "GP_1_28";
-		bias-pull-up;
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0022.1537",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-		reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&cmt0 {
-	status = "okay";
-};
-
-&mmcif1 {
-	pinctrl-0 = <&mmc1_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&sata1 {
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		spi-cpha;
-		spi-cpol;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scifa1 {
-	pinctrl-0 = <&scifa1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
-};
-
-&msiof1 {
-	pinctrl-0 = <&msiof1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	pmic: pmic@0 {
-		compatible = "renesas,r2a11302ft";
-		reg = <0>;
-		spi-max-frequency = <6000000>;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-1 = <&sdhi0_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-1 = <&sdhi2_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	sd-uhs-sdr50;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-};
-
-&i2c0	{
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "i2c-exio0";
-};
-
-&iic0	{
-	pinctrl-0 = <&iic0_pins>;
-	pinctrl-names = "i2c-exio0";
-};
-
-&i2c1	{
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "i2c-exio1";
-};
-
-&iic1	{
-	pinctrl-0 = <&iic1_pins>;
-	pinctrl-names = "i2c-exio1";
-};
-
-&i2c2	{
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "i2c-hdmi";
-
-	clock-frequency = <100000>;
-};
-
-&iic2	{
-	pinctrl-0 = <&iic2_pins>;
-	pinctrl-names = "i2c-hdmi";
-
-	clock-frequency = <100000>;
-};
-
-&i2c3	{
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "i2c-pwr";
-};
-
-&iic3	{
-	pinctrl-0 = <&iic3_pins>;
-	pinctrl-names = "i2c-pwr";
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&xhci {
-	status = "okay";
-	pinctrl-0 = <&usb2_pins>;
-	pinctrl-names = "default";
-};
-
-&pci2 {
-	status = "okay";
-	pinctrl-0 = <&usb2_pins>;
-	pinctrl-names = "default";
-};
-
-&hsusb {
-	status = "okay";
-	pinctrl-0 = <&hsusb_pins>;
-	pinctrl-names = "default";
-	renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
-};
-
-&usbphy {
-	status = "okay";
-};
-
-/* HDMI video input */
-&vin0 {
-	pinctrl-0 = <&vin0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	port {
-		vin0ep2: endpoint {
-			remote-endpoint = <&adv7612_out>;
-			bus-width = <24>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			pclk-sample = <1>;
-			data-active = <1>;
-		};
-	};
-};
-
-/* composite video input */
-&vin1 {
-	pinctrl-0 = <&vin1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	port {
-		vin1ep0: endpoint {
-			remote-endpoint = <&adv7180>;
-			bus-width = <8>;
-		};
-	};
-};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-	status = "okay";
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0>, <&src2>, <&dvc0>;
-			capture  = <&ssi1>, <&src3>, <&dvc1>;
-		};
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&ssi1 {
-	shared-pin;
-};
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
deleted file mode 100644
index fe14727eefe1e..0000000000000
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ /dev/null
@@ -1,382 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Stout board
- *
- * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
- */
-
-/dts-v1/;
-#include "r8a7790.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Stout";
-	compatible = "renesas,stout", "renesas,r8a7790";
-
-	aliases {
-		serial0 = &scifa0;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
-		};
-		led2 {
-			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
-		};
-		led3 {
-			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
-		};
-		led5 {
-			gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fixedregulator3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_sdhi0: regulator-vcc-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_out: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-
-	osc1_clk: osc1-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <148500000>;
-	};
-
-	osc4_clk: osc4-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-	};
-};
-
-&du {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
-		 <&osc1_clk>;
-	clock-names = "du.0", "du.1", "du.2", "dclkin.0";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7511_in>;
-			};
-		};
-	};
-};
-
-&lvds0 {
-	ports {
-		port@1 {
-			lvds_connector0: endpoint {
-			};
-		};
-	};
-};
-
-&lvds1 {
-	ports {
-		port@1 {
-			lvds_connector1: endpoint {
-			};
-		};
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	du_pins: du {
-		groups = "du_rgb888", "du_sync_1", "du_clk_out_0";
-		function = "du";
-	};
-
-	scifa0_pins: scifa0 {
-		groups = "scifa0_data_b";
-		function = "scifa0";
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk";
-		function = "scif_clk";
-	};
-
-	ether_pins: ether {
-		groups = "eth_link", "eth_mdio", "eth_rmii";
-		function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		groups = "intc_irq1";
-		function = "intc";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <3300>;
-	};
-
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data4";
-		function = "qspi";
-	};
-
-	iic2_pins: iic2 {
-		groups = "iic2_b";
-		function = "iic2";
-	};
-
-	iic3_pins: iic3 {
-		groups = "iic3";
-		function = "iic3";
-	};
-
-	pmic_irq_pins: pmicirq {
-		groups = "intc_irq2";
-		function = "intc";
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0022.1537",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-		reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&cmt0 {
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		spi-cpha;
-		spi-cpol;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "uboot";
-				reg = <0x00080000 0x00040000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "uboot-env";
-				reg = <0x000c0000 0x00040000>;
-				read-only;
-			};
-			partition@100000 {
-				label = "flash";
-				reg = <0x00100000 0x03f00000>;
-			};
-		};
-	};
-};
-
-&scifa0 {
-	pinctrl-0 = <&scifa0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-};
-
-&iic2	{
-	status = "okay";
-	pinctrl-0 = <&iic2_pins>;
-	pinctrl-names = "default";
-
-	clock-frequency = <100000>;
-
-	hdmi@39 {
-		compatible = "adi,adv7511w";
-		reg = <0x39>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&osc4_clk>;
-		clock-names = "cec";
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7511_in: endpoint {
-					remote-endpoint = <&du_out_rgb>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				adv7511_out: endpoint {
-					remote-endpoint = <&hdmi_con_out>;
-				};
-			};
-		};
-	};
-};
-
-&iic3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&iic3_pins>, <&pmic_irq_pins>;
-	status = "okay";
-
-	pmic@58 {
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		onkey {
-			compatible = "dlg,da9063-onkey";
-		};
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		watchdog {
-			compatible = "dlg,da9063-watchdog";
-		};
-	};
-
-	vdd_dvfs: regulator@68 {
-		compatible = "dlg,da9210";
-		reg = <0x68>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vdd: regulator@70 {
-		compatible = "dlg,da9210";
-		reg = <0x70>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&usbphy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
deleted file mode 100644
index 46fb81f5062ff..0000000000000
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ /dev/null
@@ -1,1965 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Car H2 (R8A77900) SoC
- *
- * Copyright (C) 2015 Renesas Electronics Corporation
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded Inc.
- */
-
-#include <dt-bindings/clock/r8a7790-cpg-mssr.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/power/r8a7790-sysc.h>
-
-/ {
-	compatible = "renesas,r8a7790";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &iic0;
-		i2c5 = &iic1;
-		i2c6 = &iic2;
-		i2c7 = &iic3;
-		spi0 = &qspi;
-		spi1 = &msiof0;
-		spi2 = &msiof1;
-		spi3 = &msiof2;
-		spi4 = &msiof3;
-		vin0 = &vin0;
-		vin1 = &vin1;
-		vin2 = &vin2;
-		vin3 = &vin3;
-	};
-
-	/*
-	 * The external audio clocks are configured as 0 Hz fixed frequency
-	 * clocks by default.
-	 * Boards that provide audio clocks should override them.
-	 */
-	audio_clk_a: audio_clk_a {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clk_b: audio_clk_b {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clk_c: audio_clk_c {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	/* External CAN clock */
-	can_clk: can {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1300000000>;
-			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
-			power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-			capacity-dmips-mhz = <1024>;
-			voltage-tolerance = <1>; /* 1% */
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1400000 1000000>,
-					   <1225000 1000000>,
-					   <1050000 1000000>,
-					   < 875000 1000000>,
-					   < 700000 1000000>,
-					   < 350000 1000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1300000000>;
-			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
-			power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-			capacity-dmips-mhz = <1024>;
-			voltage-tolerance = <1>; /* 1% */
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1400000 1000000>,
-					   <1225000 1000000>,
-					   <1050000 1000000>,
-					   < 875000 1000000>,
-					   < 700000 1000000>,
-					   < 350000 1000000>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-			clock-frequency = <1300000000>;
-			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
-			power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-			capacity-dmips-mhz = <1024>;
-			voltage-tolerance = <1>; /* 1% */
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1400000 1000000>,
-					   <1225000 1000000>,
-					   <1050000 1000000>,
-					   < 875000 1000000>,
-					   < 700000 1000000>,
-					   < 350000 1000000>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-			clock-frequency = <1300000000>;
-			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
-			power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-			capacity-dmips-mhz = <1024>;
-			voltage-tolerance = <1>; /* 1% */
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1400000 1000000>,
-					   <1225000 1000000>,
-					   <1050000 1000000>,
-					   < 875000 1000000>,
-					   < 700000 1000000>,
-					   < 350000 1000000>;
-		};
-
-		cpu4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clock-frequency = <780000000>;
-			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
-			power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA7>;
-			capacity-dmips-mhz = <539>;
-		};
-
-		cpu5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clock-frequency = <780000000>;
-			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
-			power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA7>;
-			capacity-dmips-mhz = <539>;
-		};
-
-		cpu6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clock-frequency = <780000000>;
-			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
-			power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA7>;
-			capacity-dmips-mhz = <539>;
-		};
-
-		cpu7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clock-frequency = <780000000>;
-			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
-			power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA7>;
-			capacity-dmips-mhz = <539>;
-		};
-
-		L2_CA15: cache-controller-0 {
-			compatible = "cache";
-			power-domains = <&sysc R8A7790_PD_CA15_SCU>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		L2_CA7: cache-controller-1 {
-			compatible = "cache";
-			power-domains = <&sysc R8A7790_PD_CA7_SCU>;
-			cache-unified;
-			cache-level = <2>;
-		};
-	};
-
-	/* External root clock */
-	extal_clk: extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	/* External PCIe clock - can be overridden by the board */
-	pcie_bus_clk: pcie_bus {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	pmu-0 {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	pmu-1 {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
-	};
-
-	/* External SCIF clock */
-	scif_clk: scif {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		rwdt: watchdog@e6020000 {
-			compatible = "renesas,r8a7790-wdt",
-				     "renesas,rcar-gen2-wdt";
-			reg = <0 0xe6020000 0 0x0c>;
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 402>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 402>;
-			status = "disabled";
-		};
-
-		gpio0: gpio@e6050000 {
-			compatible = "renesas,gpio-r8a7790",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6050000 0 0x50>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 0 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 912>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 912>;
-		};
-
-		gpio1: gpio@e6051000 {
-			compatible = "renesas,gpio-r8a7790",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6051000 0 0x50>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 32 30>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 911>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 911>;
-		};
-
-		gpio2: gpio@e6052000 {
-			compatible = "renesas,gpio-r8a7790",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6052000 0 0x50>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 64 30>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 910>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 910>;
-		};
-
-		gpio3: gpio@e6053000 {
-			compatible = "renesas,gpio-r8a7790",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6053000 0 0x50>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 96 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 909>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 909>;
-		};
-
-		gpio4: gpio@e6054000 {
-			compatible = "renesas,gpio-r8a7790",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6054000 0 0x50>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 128 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 908>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 908>;
-		};
-
-		gpio5: gpio@e6055000 {
-			compatible = "renesas,gpio-r8a7790",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055000 0 0x50>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 160 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 907>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 907>;
-		};
-
-		pfc: pinctrl@e6060000 {
-			compatible = "renesas,pfc-r8a7790";
-			reg = <0 0xe6060000 0 0x250>;
-		};
-
-		tpu: pwm@e60f0000 {
-			compatible = "renesas,tpu-r8a7790", "renesas,tpu";
-			reg = <0 0xe60f0000 0 0x148>;
-			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 304>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 304>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		cpg: clock-controller@e6150000 {
-			compatible = "renesas,r8a7790-cpg-mssr";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>, <&usb_extal_clk>;
-			clock-names = "extal", "usb_extal";
-			#clock-cells = <2>;
-			#power-domain-cells = <0>;
-			#reset-cells = <1>;
-		};
-
-		apmu@e6151000 {
-			compatible = "renesas,r8a7790-apmu", "renesas,apmu";
-			reg = <0 0xe6151000 0 0x188>;
-			cpus = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
-		};
-
-		apmu@e6152000 {
-			compatible = "renesas,r8a7790-apmu", "renesas,apmu";
-			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-		};
-
-		rst: reset-controller@e6160000 {
-			compatible = "renesas,r8a7790-rst";
-			reg = <0 0xe6160000 0 0x0100>;
-		};
-
-		sysc: system-controller@e6180000 {
-			compatible = "renesas,r8a7790-sysc";
-			reg = <0 0xe6180000 0 0x0200>;
-			#power-domain-cells = <1>;
-		};
-
-		irqc0: interrupt-controller@e61c0000 {
-			compatible = "renesas,irqc-r8a7790", "renesas,irqc";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 407>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 407>;
-		};
-
-		thermal: thermal@e61f0000 {
-			compatible = "renesas,thermal-r8a7790",
-				     "renesas,rcar-gen2-thermal",
-				     "renesas,rcar-thermal";
-			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 522>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 522>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		ipmmu_sy0: iommu@e6280000 {
-			compatible = "renesas,ipmmu-r8a7790",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6280000 0 0x1000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_sy1: iommu@e6290000 {
-			compatible = "renesas,ipmmu-r8a7790",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6290000 0 0x1000>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_ds: iommu@e6740000 {
-			compatible = "renesas,ipmmu-r8a7790",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6740000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mp: iommu@ec680000 {
-			compatible = "renesas,ipmmu-r8a7790",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xec680000 0 0x1000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mx: iommu@fe951000 {
-			compatible = "renesas,ipmmu-r8a7790",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xfe951000 0 0x1000>;
-			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_rt: iommu@ffc80000 {
-			compatible = "renesas,ipmmu-r8a7790",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xffc80000 0 0x1000>;
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		icram0:	sram@e63a0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63a0000 0 0x12000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63a0000 0x12000>;
-		};
-
-		icram1:	sram@e63c0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63c0000 0 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63c0000 0x1000>;
-
-			smp-sram@0 {
-				compatible = "renesas,smp-sram";
-				reg = <0 0x100>;
-			};
-		};
-
-		i2c0: i2c@e6508000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7790",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6508000 0 0x40>;
-			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 931>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 931>;
-			i2c-scl-internal-delay-ns = <110>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@e6518000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7790",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6518000 0 0x40>;
-			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 930>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 930>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@e6530000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7790",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6530000 0 0x40>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 929>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 929>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@e6540000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7790",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6540000 0 0x40>;
-			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 928>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 928>;
-			i2c-scl-internal-delay-ns = <110>;
-			status = "disabled";
-		};
-
-		iic0: i2c@e6500000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7790",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6500000 0 0x425>;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 318>;
-			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
-			       <&dmac1 0x61>, <&dmac1 0x62>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 318>;
-			status = "disabled";
-		};
-
-		iic1: i2c@e6510000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7790",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6510000 0 0x425>;
-			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 323>;
-			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
-			       <&dmac1 0x65>, <&dmac1 0x66>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 323>;
-			status = "disabled";
-		};
-
-		iic2: i2c@e6520000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7790",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6520000 0 0x425>;
-			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 300>;
-			dmas = <&dmac0 0x69>, <&dmac0 0x6a>,
-			       <&dmac1 0x69>, <&dmac1 0x6a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 300>;
-			status = "disabled";
-		};
-
-		iic3: i2c@e60b0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7790",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe60b0000 0 0x425>;
-			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 926>;
-			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
-			       <&dmac1 0x77>, <&dmac1 0x78>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 926>;
-			status = "disabled";
-		};
-
-		hsusb: usb@e6590000 {
-			compatible = "renesas,usbhs-r8a7790",
-				     "renesas,rcar-gen2-usbhs";
-			reg = <0 0xe6590000 0 0x100>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 704>;
-			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
-			       <&usb_dmac1 0>, <&usb_dmac1 1>;
-			dma-names = "ch0", "ch1", "ch2", "ch3";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			renesas,buswait = <4>;
-			phys = <&usb0 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		usbphy: usb-phy-controller@e6590100 {
-			compatible = "renesas,usb-phy-r8a7790",
-				     "renesas,rcar-gen2-usb-phy";
-			reg = <0 0xe6590100 0 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cpg CPG_MOD 704>;
-			clock-names = "usbhs";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			status = "disabled";
-
-			usb0: usb-phy@0 {
-				reg = <0>;
-				#phy-cells = <1>;
-			};
-			usb2: usb-phy@2 {
-				reg = <2>;
-				#phy-cells = <1>;
-			};
-		};
-
-		usb_dmac0: dma-controller@e65a0000 {
-			compatible = "renesas,r8a7790-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 330>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 330>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		usb_dmac1: dma-controller@e65b0000 {
-			compatible = "renesas,r8a7790-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 331>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 331>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		dmac0: dma-controller@e6700000 {
-			compatible = "renesas,dmac-r8a7790",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 219>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 219>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		dmac1: dma-controller@e6720000 {
-			compatible = "renesas,dmac-r8a7790",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 218>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 218>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		avb: ethernet@e6800000 {
-			compatible = "renesas,etheravb-r8a7790",
-				     "renesas,etheravb-rcar-gen2";
-			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
-			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 812>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 812>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		qspi: spi@e6b10000 {
-			compatible = "renesas,qspi-r8a7790", "renesas,qspi";
-			reg = <0 0xe6b10000 0 0x2c>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 917>;
-			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
-			       <&dmac1 0x17>, <&dmac1 0x18>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 917>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		scifa0: serial@e6c40000 {
-			compatible = "renesas,scifa-r8a7790",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c40000 0 64>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 204>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
-			       <&dmac1 0x21>, <&dmac1 0x22>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 204>;
-			status = "disabled";
-		};
-
-		scifa1: serial@e6c50000 {
-			compatible = "renesas,scifa-r8a7790",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c50000 0 64>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 203>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
-			       <&dmac1 0x25>, <&dmac1 0x26>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 203>;
-			status = "disabled";
-		};
-
-		scifa2: serial@e6c60000 {
-			compatible = "renesas,scifa-r8a7790",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c60000 0 64>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 202>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
-			       <&dmac1 0x27>, <&dmac1 0x28>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 202>;
-			status = "disabled";
-		};
-
-		scifb0: serial@e6c20000 {
-			compatible = "renesas,scifb-r8a7790",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c20000 0 0x100>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 206>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
-			       <&dmac1 0x3d>, <&dmac1 0x3e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 206>;
-			status = "disabled";
-		};
-
-		scifb1: serial@e6c30000 {
-			compatible = "renesas,scifb-r8a7790",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c30000 0 0x100>;
-			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 207>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
-			       <&dmac1 0x19>, <&dmac1 0x1a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 207>;
-			status = "disabled";
-		};
-
-		scifb2: serial@e6ce0000 {
-			compatible = "renesas,scifb-r8a7790",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6ce0000 0 0x100>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 216>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
-			       <&dmac1 0x1d>, <&dmac1 0x1e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 216>;
-			status = "disabled";
-		};
-
-		scif0: serial@e6e60000 {
-			compatible = "renesas,scif-r8a7790",
-				     "renesas,rcar-gen2-scif",
-				     "renesas,scif";
-			reg = <0 0xe6e60000 0 64>;
-			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 721>,
-				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
-			       <&dmac1 0x29>, <&dmac1 0x2a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 721>;
-			status = "disabled";
-		};
-
-		scif1: serial@e6e68000 {
-			compatible = "renesas,scif-r8a7790",
-				     "renesas,rcar-gen2-scif",
-				     "renesas,scif";
-			reg = <0 0xe6e68000 0 64>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 720>,
-				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
-			       <&dmac1 0x2d>, <&dmac1 0x2e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 720>;
-			status = "disabled";
-		};
-
-		scif2: serial@e6e56000 {
-			compatible = "renesas,scif-r8a7790",
-				     "renesas,rcar-gen2-scif",
-				     "renesas,scif";
-			reg = <0 0xe6e56000 0 64>;
-			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 310>,
-				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
-			       <&dmac1 0x2b>, <&dmac1 0x2c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 310>;
-			status = "disabled";
-		};
-
-		hscif0: serial@e62c0000 {
-			compatible = "renesas,hscif-r8a7790",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c0000 0 96>;
-			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 717>,
-				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
-			       <&dmac1 0x39>, <&dmac1 0x3a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 717>;
-			status = "disabled";
-		};
-
-		hscif1: serial@e62c8000 {
-			compatible = "renesas,hscif-r8a7790",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c8000 0 96>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 716>,
-				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
-			       <&dmac1 0x4d>, <&dmac1 0x4e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 716>;
-			status = "disabled";
-		};
-
-		msiof0: spi@e6e20000 {
-			compatible = "renesas,msiof-r8a7790",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e20000 0 0x0064>;
-			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 0>;
-			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
-			       <&dmac1 0x51>, <&dmac1 0x52>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		msiof1: spi@e6e10000 {
-			compatible = "renesas,msiof-r8a7790",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e10000 0 0x0064>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 208>;
-			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
-			       <&dmac1 0x55>, <&dmac1 0x56>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 208>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		msiof2: spi@e6e00000 {
-			compatible = "renesas,msiof-r8a7790",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e00000 0 0x0064>;
-			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 205>;
-			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
-			       <&dmac1 0x41>, <&dmac1 0x42>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 205>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		msiof3: spi@e6c90000 {
-			compatible = "renesas,msiof-r8a7790",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6c90000 0 0x0064>;
-			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 215>;
-			dmas = <&dmac0 0x45>, <&dmac0 0x46>,
-			       <&dmac1 0x45>, <&dmac1 0x46>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 215>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pwm0: pwm@e6e30000 {
-			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
-			reg = <0 0xe6e30000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm1: pwm@e6e31000 {
-			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
-			reg = <0 0xe6e31000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm2: pwm@e6e32000 {
-			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
-			reg = <0 0xe6e32000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm3: pwm@e6e33000 {
-			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
-			reg = <0 0xe6e33000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm4: pwm@e6e34000 {
-			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
-			reg = <0 0xe6e34000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm5: pwm@e6e35000 {
-			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
-			reg = <0 0xe6e35000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm6: pwm@e6e36000 {
-			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
-			reg = <0 0xe6e36000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		can0: can@e6e80000 {
-			compatible = "renesas,can-r8a7790",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e80000 0 0x1000>;
-			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 916>,
-				 <&cpg CPG_CORE R8A7790_CLK_RCAN>, <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 916>;
-			status = "disabled";
-		};
-
-		can1: can@e6e88000 {
-			compatible = "renesas,can-r8a7790",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e88000 0 0x1000>;
-			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 915>,
-				 <&cpg CPG_CORE R8A7790_CLK_RCAN>, <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 915>;
-			status = "disabled";
-		};
-
-		vin0: video@e6ef0000 {
-			compatible = "renesas,vin-r8a7790",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef0000 0 0x1000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 811>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 811>;
-			status = "disabled";
-		};
-
-		vin1: video@e6ef1000 {
-			compatible = "renesas,vin-r8a7790",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef1000 0 0x1000>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 810>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 810>;
-			status = "disabled";
-		};
-
-		vin2: video@e6ef2000 {
-			compatible = "renesas,vin-r8a7790",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef2000 0 0x1000>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 809>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 809>;
-			status = "disabled";
-		};
-
-		vin3: video@e6ef3000 {
-			compatible = "renesas,vin-r8a7790",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef3000 0 0x1000>;
-			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 808>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 808>;
-			status = "disabled";
-		};
-
-		rcar_sound: sound@ec500000 {
-			/*
-			 * #sound-dai-cells is required if simple-card
-			 *
-			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
-			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
-			 */
-			compatible = "renesas,rcar_sound-r8a7790",
-				     "renesas,rcar_sound-gen2";
-			reg = <0 0xec500000 0 0x1000>, /* SCU */
-			      <0 0xec5a0000 0 0x100>,  /* ADG */
-			      <0 0xec540000 0 0x1000>, /* SSIU */
-			      <0 0xec541000 0 0x280>,  /* SSI */
-			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
-			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
-			clocks = <&cpg CPG_MOD 1005>,
-				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
-				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
-				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
-				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
-				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
-				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
-				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
-				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
-				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
-				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
-				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A7790_CLK_M2>;
-			clock-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
-				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
-				      "ssi.1", "ssi.0",
-				      "src.9", "src.8", "src.7", "src.6",
-				      "src.5", "src.4", "src.3", "src.2",
-				      "src.1", "src.0",
-				      "ctu.0", "ctu.1",
-				      "mix.0", "mix.1",
-				      "dvc.0", "dvc.1",
-				      "clk_a", "clk_b", "clk_c", "clk_i";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 1005>,
-				 <&cpg 1006>, <&cpg 1007>,
-				 <&cpg 1008>, <&cpg 1009>,
-				 <&cpg 1010>, <&cpg 1011>,
-				 <&cpg 1012>, <&cpg 1013>,
-				 <&cpg 1014>, <&cpg 1015>;
-			reset-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
-				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
-				      "ssi.1", "ssi.0";
-
-			status = "disabled";
-
-			rcar_sound,dvc {
-				dvc0: dvc-0 {
-					dmas = <&audma1 0xbc>;
-					dma-names = "tx";
-				};
-				dvc1: dvc-1 {
-					dmas = <&audma1 0xbe>;
-					dma-names = "tx";
-				};
-			};
-
-			rcar_sound,mix {
-				mix0: mix-0 { };
-				mix1: mix-1 { };
-			};
-
-			rcar_sound,ctu {
-				ctu00: ctu-0 { };
-				ctu01: ctu-1 { };
-				ctu02: ctu-2 { };
-				ctu03: ctu-3 { };
-				ctu10: ctu-4 { };
-				ctu11: ctu-5 { };
-				ctu12: ctu-6 { };
-				ctu13: ctu-7 { };
-			};
-
-			rcar_sound,src {
-				src0: src-0 {
-					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x85>, <&audma1 0x9a>;
-					dma-names = "rx", "tx";
-				};
-				src1: src-1 {
-					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x87>, <&audma1 0x9c>;
-					dma-names = "rx", "tx";
-				};
-				src2: src-2 {
-					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x89>, <&audma1 0x9e>;
-					dma-names = "rx", "tx";
-				};
-				src3: src-3 {
-					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
-					dma-names = "rx", "tx";
-				};
-				src4: src-4 {
-					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
-					dma-names = "rx", "tx";
-				};
-				src5: src-5 {
-					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
-					dma-names = "rx", "tx";
-				};
-				src6: src-6 {
-					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x91>, <&audma1 0xb4>;
-					dma-names = "rx", "tx";
-				};
-				src7: src-7 {
-					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x93>, <&audma1 0xb6>;
-					dma-names = "rx", "tx";
-				};
-				src8: src-8 {
-					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x95>, <&audma1 0xb8>;
-					dma-names = "rx", "tx";
-				};
-				src9: src-9 {
-					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x97>, <&audma1 0xba>;
-					dma-names = "rx", "tx";
-				};
-			};
-
-			rcar_sound,ssi {
-				ssi0: ssi-0 {
-					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x01>, <&audma1 0x02>,
-					       <&audma0 0x15>, <&audma1 0x16>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi1: ssi-1 {
-					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x03>, <&audma1 0x04>,
-					       <&audma0 0x49>, <&audma1 0x4a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi2: ssi-2 {
-					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x05>, <&audma1 0x06>,
-					       <&audma0 0x63>, <&audma1 0x64>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi3: ssi-3 {
-					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x07>, <&audma1 0x08>,
-					       <&audma0 0x6f>, <&audma1 0x70>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi4: ssi-4 {
-					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x09>, <&audma1 0x0a>,
-					       <&audma0 0x71>, <&audma1 0x72>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi5: ssi-5 {
-					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0b>, <&audma1 0x0c>,
-					       <&audma0 0x73>, <&audma1 0x74>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi6: ssi-6 {
-					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0d>, <&audma1 0x0e>,
-					       <&audma0 0x75>, <&audma1 0x76>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi7: ssi-7 {
-					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0f>, <&audma1 0x10>,
-					       <&audma0 0x79>, <&audma1 0x7a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi8: ssi-8 {
-					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x11>, <&audma1 0x12>,
-					       <&audma0 0x7b>, <&audma1 0x7c>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi9: ssi-9 {
-					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x13>, <&audma1 0x14>,
-					       <&audma0 0x7d>, <&audma1 0x7e>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-			};
-		};
-
-		audma0: dma-controller@ec700000 {
-			compatible = "renesas,dmac-r8a7790",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 502>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 502>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		audma1: dma-controller@ec720000 {
-			compatible = "renesas,dmac-r8a7790",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 501>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 501>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		xhci: usb@ee000000 {
-			compatible = "renesas,xhci-r8a7790",
-				     "renesas,rcar-gen2-xhci";
-			reg = <0 0xee000000 0 0xc00>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 328>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 328>;
-			phys = <&usb2 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		pci0: pci@ee090000 {
-			compatible = "renesas,pci-r8a7790",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee090000 0 0xc00>,
-			      <0 0xee080000 0 0x1100>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x800 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x1000 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-		};
-
-		pci1: pci@ee0b0000 {
-			compatible = "renesas,pci-r8a7790",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee0b0000 0 0xc00>,
-			      <0 0xee0a0000 0 0x1100>;
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <1 1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pci2: pci@ee0d0000 {
-			compatible = "renesas,pci-r8a7790",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			reg = <0 0xee0d0000 0 0xc00>,
-			      <0 0xee0c0000 0 0x1100>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-
-			bus-range = <2 2>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x20800 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x21000 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-		};
-
-		sdhi0: mmc@ee100000 {
-			compatible = "renesas,sdhi-r8a7790",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee100000 0 0x328>;
-			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
-			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
-			       <&dmac1 0xcd>, <&dmac1 0xce>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <195000000>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 314>;
-			status = "disabled";
-		};
-
-		sdhi1: mmc@ee120000 {
-			compatible = "renesas,sdhi-r8a7790",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee120000 0 0x328>;
-			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 313>;
-			dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
-			       <&dmac1 0xc9>, <&dmac1 0xca>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <195000000>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 313>;
-			status = "disabled";
-		};
-
-		sdhi2: mmc@ee140000 {
-			compatible = "renesas,sdhi-r8a7790",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee140000 0 0x100>;
-			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
-			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
-			       <&dmac1 0xc1>, <&dmac1 0xc2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 312>;
-			status = "disabled";
-		};
-
-		sdhi3: mmc@ee160000 {
-			compatible = "renesas,sdhi-r8a7790",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee160000 0 0x100>;
-			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
-			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
-			       <&dmac1 0xd3>, <&dmac1 0xd4>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 311>;
-			status = "disabled";
-		};
-
-		mmcif0: mmc@ee200000 {
-			compatible = "renesas,mmcif-r8a7790",
-				     "renesas,sh-mmcif";
-			reg = <0 0xee200000 0 0x80>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 315>;
-			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
-			       <&dmac1 0xd1>, <&dmac1 0xd2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 315>;
-			reg-io-width = <4>;
-			status = "disabled";
-			max-frequency = <97500000>;
-		};
-
-		mmcif1: mmc@ee220000 {
-			compatible = "renesas,mmcif-r8a7790",
-				     "renesas,sh-mmcif";
-			reg = <0 0xee220000 0 0x80>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 305>;
-			dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
-			       <&dmac1 0xe1>, <&dmac1 0xe2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 305>;
-			reg-io-width = <4>;
-			status = "disabled";
-			max-frequency = <97500000>;
-		};
-
-		sata0: sata@ee300000 {
-			compatible = "renesas,sata-r8a7790",
-				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee300000 0 0x200000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 815>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 815>;
-			status = "disabled";
-		};
-
-		sata1: sata@ee500000 {
-			compatible = "renesas,sata-r8a7790",
-				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee500000 0 0x200000>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 814>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 814>;
-			status = "disabled";
-		};
-
-		ether: ethernet@ee700000 {
-			compatible = "renesas,ether-r8a7790",
-				     "renesas,rcar-gen2-ether";
-			reg = <0 0xee700000 0 0x400>;
-			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 813>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 813>;
-			phy-mode = "rmii";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@f1001000 {
-			compatible = "arm,gic-400";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
-			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&cpg CPG_MOD 408>;
-			clock-names = "clk";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 408>;
-		};
-
-		pciec: pcie@fe000000 {
-			compatible = "renesas,pcie-r8a7790",
-				     "renesas,pcie-rcar-gen2";
-			reg = <0 0xfe000000 0 0x80000>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			bus-range = <0x00 0xff>;
-			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
-				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
-				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
-				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
-			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
-				     <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
-			clock-names = "pcie", "pcie_bus";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 319>;
-			status = "disabled";
-		};
-
-		vsp@fe920000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe920000 0 0x8000>;
-			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 130>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 130>;
-		};
-
-		vsp@fe928000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe928000 0 0x8000>;
-			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 131>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 131>;
-		};
-
-		vsp@fe930000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe930000 0 0x8000>;
-			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 128>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 128>;
-		};
-
-		vsp@fe938000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe938000 0 0x8000>;
-			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 127>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 127>;
-		};
-
-		fdp1@fe940000 {
-			compatible = "renesas,fdp1";
-			reg = <0 0xfe940000 0 0x2400>;
-			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 119>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 119>;
-		};
-
-		fdp1@fe944000 {
-			compatible = "renesas,fdp1";
-			reg = <0 0xfe944000 0 0x2400>;
-			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 118>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 118>;
-		};
-
-		fdp1@fe948000 {
-			compatible = "renesas,fdp1";
-			reg = <0 0xfe948000 0 0x2400>;
-			interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 117>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 117>;
-		};
-
-		jpu: jpeg-codec@fe980000 {
-			compatible = "renesas,jpu-r8a7790",
-				     "renesas,rcar-gen2-jpu";
-			reg = <0 0xfe980000 0 0x10300>;
-			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 106>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 106>;
-		};
-
-		du: display@feb00000 {
-			compatible = "renesas,du-r8a7790";
-			reg = <0 0xfeb00000 0 0x70000>;
-			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
-				 <&cpg CPG_MOD 722>;
-			clock-names = "du.0", "du.1", "du.2";
-			resets = <&cpg 724>;
-			reset-names = "du.0";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					du_out_rgb: endpoint {
-					};
-				};
-				port@1 {
-					reg = <1>;
-					du_out_lvds0: endpoint {
-						remote-endpoint = <&lvds0_in>;
-					};
-				};
-				port@2 {
-					reg = <2>;
-					du_out_lvds1: endpoint {
-						remote-endpoint = <&lvds1_in>;
-					};
-				};
-			};
-		};
-
-		lvds0: lvds@feb90000 {
-			compatible = "renesas,r8a7790-lvds";
-			reg = <0 0xfeb90000 0 0x1c>;
-			clocks = <&cpg CPG_MOD 726>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 726>;
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					lvds0_in: endpoint {
-						remote-endpoint = <&du_out_lvds0>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					lvds0_out: endpoint {
-					};
-				};
-			};
-		};
-
-		lvds1: lvds@feb94000 {
-			compatible = "renesas,r8a7790-lvds";
-			reg = <0 0xfeb94000 0 0x1c>;
-			clocks = <&cpg CPG_MOD 725>;
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 725>;
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					lvds1_in: endpoint {
-						remote-endpoint = <&du_out_lvds1>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					lvds1_out: endpoint {
-					};
-				};
-			};
-		};
-
-		prr: chipid@ff000044 {
-			compatible = "renesas,prr";
-			reg = <0 0xff000044 0 4>;
-		};
-
-		cmt0: timer@ffca0000 {
-			compatible = "renesas,r8a7790-cmt0",
-				     "renesas,rcar-gen2-cmt0";
-			reg = <0 0xffca0000 0 0x1004>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 124>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 124>;
-
-			status = "disabled";
-		};
-
-		cmt1: timer@e6130000 {
-			compatible = "renesas,r8a7790-cmt1",
-				     "renesas,rcar-gen2-cmt1";
-			reg = <0 0xe6130000 0 0x1004>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 329>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-			resets = <&cpg 329>;
-
-			status = "disabled";
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	/* External USB clock - can be overridden by the board */
-	usb_extal_clk: usb_extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <48000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
deleted file mode 100644
index 26a40782cc899..0000000000000
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ /dev/null
@@ -1,912 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Koelsch board
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- */
-
-/*
- * SSI-AK4643
- *
- * SW1: 1: AK4643
- *      2: CN22
- *      3: ADV7511
- *
- * This command is required when Playback/Capture
- *
- *	amixer set "LINEOUT Mixer DACL" on
- *	amixer set "DVC Out" 100%
- *	amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- *	amixer set "DVC Out Mute" on
- *	amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
- *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- *	amixer set "DVC Out Ramp" on
- *	aplay xxx.wav &
- *	amixer set "DVC Out"  80%  // Volume Down
- *	amixer set "DVC Out" 100%  // Volume Up
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Koelsch";
-	compatible = "renesas,koelsch", "renesas,r8a7791";
-
-	aliases {
-		serial0 = &scif0;
-		serial1 = &scif1;
-		i2c9 = &gpioi2c1;
-		i2c10 = &gpioi2c2;
-		i2c11 = &gpioi2c4;
-		i2c12 = &i2cexio1;
-		i2c13 = &i2chdmi;
-		i2c14 = &i2cexio4;
-		mmc0 = &sdhi0;
-		mmc1 = &sdhi1;
-		mmc2 = &sdhi2;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keyboard_pins>;
-		pinctrl-names = "default";
-
-		key-1 {
-			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_1>;
-			label = "SW2-1";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-2 {
-			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_2>;
-			label = "SW2-2";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-3 {
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_3>;
-			label = "SW2-3";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-4 {
-			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_4>;
-			label = "SW2-4";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-a {
-			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_A>;
-			label = "SW30";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_B>;
-			label = "SW31";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_C>;
-			label = "SW32";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-d {
-			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_D>;
-			label = "SW33";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-e {
-			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_E>;
-			label = "SW34";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-f {
-			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_F>;
-			label = "SW35";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-g {
-			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_G>;
-			label = "SW36";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-			label = "LED6";
-		};
-		led7 {
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-			label = "LED7";
-		};
-		led8 {
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-			label = "LED8";
-		};
-	};
-
-	vcc_sdhi0: regulator-vcc-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vcc_sdhi1: regulator-vcc-sdhi1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI1 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi1: regulator-vccq-sdhi1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vcc_sdhi2: regulator-vcc-sdhi2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi2: regulator-vccq-sdhi2 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	audio_clock: audio_clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <11289600>;
-	};
-
-	rsnd_ak4643: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&ak4643>;
-			clocks = <&audio_clock>;
-		};
-	};
-
-	hdmi-in {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&adv7612_in>;
-			};
-		};
-	};
-
-	cec_clock: cec-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_out: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-
-	x2_clk: x2-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <74250000>;
-	};
-
-	x13_clk: x13-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <148500000>;
-	};
-
-	gpioi2c1: i2c-9 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	gpioi2c2: i2c-10 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	gpioi2c4: i2c-11 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	/*
-	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
-	 * A fallback to GPIO is provided.
-	 */
-	i2cexio1: i2c-12 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&i2c1>, <&gpioi2c1>;
-		i2c-bus-name = "i2c-exio1";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	/*
-	 * A fallback to GPIO is provided for I2C2.
-	 */
-	i2chdmi: i2c-13 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&i2c2>, <&gpioi2c2>;
-		i2c-bus-name = "i2c-hdmi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ak4643: codec@12 {
-			compatible = "asahi-kasei,ak4643";
-			#sound-dai-cells = <0>;
-			reg = <0x12>;
-		};
-
-		composite-in@20 {
-			compatible = "adi,adv7180";
-			reg = <0x20>;
-
-			port {
-				adv7180: endpoint {
-					bus-width = <8>;
-					remote-endpoint = <&vin1ep>;
-				};
-			};
-		};
-
-		hdmi@39 {
-			compatible = "adi,adv7511w";
-			reg = <0x39>;
-			interrupt-parent = <&gpio3>;
-			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&cec_clock>;
-			clock-names = "cec";
-
-			adi,input-depth = <8>;
-			adi,input-colorspace = "rgb";
-			adi,input-clock = "1x";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7511_in: endpoint {
-						remote-endpoint = <&du_out_rgb>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					adv7511_out: endpoint {
-						remote-endpoint = <&hdmi_con_out>;
-					};
-				};
-			};
-		};
-
-		hdmi-in@4c {
-			compatible = "adi,adv7612";
-			reg = <0x4c>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-			default-input = <0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7612_in: endpoint {
-						remote-endpoint = <&hdmi_con_in>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					adv7612_out: endpoint {
-						remote-endpoint = <&vin0ep2>;
-					};
-				};
-			};
-		};
-
-		eeprom@50 {
-			compatible = "renesas,r1ex24002", "atmel,24c02";
-			reg = <0x50>;
-			pagesize = <16>;
-		};
-	};
-
-	/*
-	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
-	 * A fallback to GPIO is provided.
-	 */
-	i2cexio4: i2c-14 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&i2c4>, <&gpioi2c4>;
-		i2c-bus-name = "i2c-exio4";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
-
-&du {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
-		 <&x13_clk>, <&x2_clk>;
-	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7511_in>;
-			};
-		};
-	};
-};
-
-&lvds0 {
-	ports {
-		port@1 {
-			lvds_connector: endpoint {
-			};
-		};
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	i2c1_pins: i2c1 {
-		groups = "i2c1";
-		function = "i2c1";
-	};
-
-	i2c2_pins: i2c2 {
-		groups = "i2c2";
-		function = "i2c2";
-	};
-
-	i2c4_pins: i2c4 {
-		groups = "i2c4_c";
-		function = "i2c4";
-	};
-
-	du_pins: du {
-		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
-		function = "du";
-	};
-
-	scif0_pins: scif0 {
-		groups = "scif0_data_d";
-		function = "scif0";
-	};
-
-	scif1_pins: scif1 {
-		groups = "scif1_data_d";
-		function = "scif1";
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk";
-		function = "scif_clk";
-	};
-
-	ether_pins: ether {
-		groups = "eth_link", "eth_mdio", "eth_rmii";
-		function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		groups = "intc_irq0";
-		function = "intc";
-	};
-
-	pmic_irq_pins: pmicirq {
-		groups = "intc_irq2";
-		function = "intc";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <3300>;
-	};
-
-	sdhi0_pins_uhs: sd0_uhs {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <1800>;
-	};
-
-	sdhi1_pins: sd1 {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <3300>;
-	};
-
-	sdhi1_pins_uhs: sd1_uhs {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <1800>;
-	};
-
-	sdhi2_pins: sd2 {
-		groups = "sdhi2_data4", "sdhi2_ctrl";
-		function = "sdhi2";
-		power-source = <3300>;
-	};
-
-	sdhi2_pins_uhs: sd2_uhs {
-		groups = "sdhi2_data4", "sdhi2_ctrl";
-		function = "sdhi2";
-		power-source = <1800>;
-	};
-
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data4";
-		function = "qspi";
-	};
-
-	msiof0_pins: msiof0 {
-		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
-				 "msiof0_tx";
-		function = "msiof0";
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
-	};
-
-	vin0_pins: vin0 {
-		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
-		function = "vin0";
-	};
-
-	vin1_pins: vin1 {
-		groups = "vin1_data8", "vin1_clk";
-		function = "vin1";
-	};
-
-	sound_pins: sound {
-		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
-		function = "ssi";
-	};
-
-	sound_clk_pins: sound_clk {
-		groups = "audio_clk_a";
-		function = "audio_clk";
-	};
-
-	keyboard_pins: keyboard {
-		pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
-		bias-pull-up;
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0022.1537",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&cmt0 {
-	status = "okay";
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&sata0 {
-	status = "okay";
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif1 {
-	pinctrl-0 = <&scif1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-1 = <&sdhi0_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-1 = <&sdhi1_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi1>;
-	vqmmc-supply = <&vccq_sdhi1>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-	sd-uhs-sdr50;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-1 = <&sdhi2_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
-	sd-uhs-sdr50;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		spi-cpha;
-		spi-cpol;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "user";
-				reg = <0x00080000 0x00580000>;
-				read-only;
-			};
-			partition@600000 {
-				label = "flash";
-				reg = <0x00600000 0x03a00000>;
-			};
-		};
-	};
-};
-
-&msiof0 {
-	pinctrl-0 = <&msiof0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	pmic: pmic@0 {
-		compatible = "renesas,r2a11302ft";
-		reg = <0>;
-		spi-max-frequency = <6000000>;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&i2c1 {
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "i2c-exio1";
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "i2c-hdmi";
-
-	clock-frequency = <100000>;
-};
-
-&i2c4 {
-	pinctrl-0 = <&i2c4_pins>;
-	pinctrl-names = "i2c-exio4";
-};
-
-&i2c6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pmic_irq_pins>;
-	status = "okay";
-	clock-frequency = <100000>;
-
-	pmic@58 {
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		watchdog {
-			compatible = "dlg,da9063-watchdog";
-		};
-	};
-
-	vdd_dvfs: regulator@68 {
-		compatible = "dlg,da9210";
-		reg = <0x68>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&hsusb {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&pcie_bus_clk {
-	clock-frequency = <100000000>;
-};
-
-&pciec {
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-};
-
-/* HDMI video input */
-&vin0 {
-	status = "okay";
-	pinctrl-0 = <&vin0_pins>;
-	pinctrl-names = "default";
-
-	port {
-		vin0ep2: endpoint {
-			remote-endpoint = <&adv7612_out>;
-			bus-width = <24>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			pclk-sample = <1>;
-			data-active = <1>;
-		};
-	};
-};
-
-/* composite video input */
-&vin1 {
-	status = "okay";
-	pinctrl-0 = <&vin1_pins>;
-	pinctrl-names = "default";
-
-	port {
-		vin1ep: endpoint {
-			remote-endpoint = <&adv7180>;
-			bus-width = <8>;
-		};
-	};
-};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-	status = "okay";
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0>, <&src2>, <&dvc0>;
-			capture  = <&ssi1>, <&src3>, <&dvc1>;
-		};
-	};
-};
-
-&ssi1 {
-	shared-pin;
-};
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
deleted file mode 100644
index ec0a20d5130d6..0000000000000
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ /dev/null
@@ -1,523 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Porter board
- *
- * Copyright (C) 2015 Cogent Embedded, Inc.
- */
-
-/*
- * SSI-AK4642
- *
- * JP3: 2-1: AK4642
- *      2-3: ADV7511
- *
- * This command is required before playback/capture:
- *
- *	amixer set "LINEOUT Mixer DACL" on
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Porter";
-	compatible = "renesas,porter", "renesas,r8a7791";
-
-	aliases {
-		serial0 = &scif0;
-		i2c9 = &gpioi2c2;
-		i2c10 = &i2chdmi;
-		mmc0 = &sdhi0;
-		mmc1 = &sdhi2;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	vcc_sdhi0: regulator-vcc-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vcc_sdhi2: regulator-vcc-sdhi2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vccq_sdhi2: regulator-vccq-sdhi2 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-
-	x3_clk: x3-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <148500000>;
-	};
-
-	x16_clk: x16-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <74250000>;
-	};
-
-	x14_clk: audio_clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <11289600>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&soundcodec>;
-		simple-audio-card,frame-master = <&soundcodec>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		soundcodec: simple-audio-card,codec {
-			sound-dai = <&ak4642>;
-			clocks = <&x14_clk>;
-		};
-	};
-
-	gpioi2c2: i2c-9 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	/*
-	 * A fallback to GPIO is provided for I2C2.
-	 */
-	i2chdmi: i2c-10 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&i2c2>, <&gpioi2c2>;
-		i2c-bus-name = "i2c-hdmi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ak4642: codec@12 {
-			compatible = "asahi-kasei,ak4642";
-			#sound-dai-cells = <0>;
-			reg = <0x12>;
-		};
-
-		composite-in@20 {
-			compatible = "adi,adv7180";
-			reg = <0x20>;
-
-			port {
-				adv7180: endpoint {
-					bus-width = <8>;
-					remote-endpoint = <&vin0ep>;
-				};
-			};
-		};
-
-		hdmi@39 {
-			compatible = "adi,adv7511w";
-			reg = <0x39>;
-			interrupt-parent = <&gpio3>;
-			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
-
-			adi,input-depth = <8>;
-			adi,input-colorspace = "rgb";
-			adi,input-clock = "1x";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7511_in: endpoint {
-						remote-endpoint = <&du_out_rgb>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					adv7511_out: endpoint {
-						remote-endpoint = <&hdmi_con>;
-					};
-				};
-			};
-		};
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	scif0_pins: scif0 {
-		groups = "scif0_data_d";
-		function = "scif0";
-	};
-
-	ether_pins: ether {
-		groups = "eth_link", "eth_mdio", "eth_rmii";
-		function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		groups = "intc_irq0";
-		function = "intc";
-	};
-
-	pmic_irq_pins: pmicirq {
-		groups = "intc_irq2";
-		function = "intc";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-	};
-
-	sdhi2_pins: sd2 {
-		groups = "sdhi2_data4", "sdhi2_ctrl";
-		function = "sdhi2";
-	};
-
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data4";
-		function = "qspi";
-	};
-
-	i2c2_pins: i2c2 {
-		groups = "i2c2";
-		function = "i2c2";
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
-	};
-
-	vin0_pins: vin0 {
-		groups = "vin0_data8", "vin0_clk";
-		function = "vin0";
-	};
-
-	can0_pins: can0 {
-		groups = "can0_data";
-		function = "can0";
-	};
-
-	du_pins: du {
-		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
-		function = "du";
-	};
-
-	ssi_pins: sound {
-		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
-		function = "ssi";
-	};
-
-	audio_clk_pins: audio_clk {
-		groups = "audio_clk_a";
-		function = "audio_clk";
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0022.1537",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader_prg";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user_prg";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash_fs";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "i2c-hdmi";
-
-	clock-frequency = <400000>;
-};
-
-&i2c6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pmic_irq_pins>;
-	status = "okay";
-	clock-frequency = <100000>;
-
-	pmic@5a {
-		compatible = "dlg,da9063l";
-		reg = <0x5a>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		watchdog {
-			compatible = "dlg,da9063-watchdog";
-		};
-	};
-
-	vdd_dvfs: regulator@68 {
-		compatible = "dlg,da9210";
-		reg = <0x68>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&sata0 {
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-};
-
-/* composite video input */
-&vin0 {
-	status = "okay";
-	pinctrl-0 = <&vin0_pins>;
-	pinctrl-names = "default";
-
-	port {
-		vin0ep: endpoint {
-			remote-endpoint = <&adv7180>;
-			bus-width = <8>;
-		};
-	};
-};
-
-&pci0 {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pci1 {
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&hsusb {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&pcie_bus_clk {
-	clock-frequency = <100000000>;
-};
-
-&pciec {
-	status = "okay";
-};
-
-&can0 {
-	pinctrl-0 = <&can0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&du {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
-		 <&x3_clk>, <&x16_clk>;
-	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7511_in>;
-			};
-		};
-	};
-};
-
-&lvds0 {
-	ports {
-		port@1 {
-			lvds_connector: endpoint {
-			};
-		};
-	};
-};
-
-&rcar_sound {
-	pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0>;
-			capture  = <&ssi1>;
-		};
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&ssi1 {
-	shared-pin;
-};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
deleted file mode 100644
index b9d34147628e1..0000000000000
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ /dev/null
@@ -1,1891 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Car M2-W (R8A77910) SoC
- *
- * Copyright (C) 2013-2015 Renesas Electronics Corporation
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded Inc.
- */
-
-#include <dt-bindings/clock/r8a7791-cpg-mssr.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/power/r8a7791-sysc.h>
-
-/ {
-	compatible = "renesas,r8a7791";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		i2c8 = &i2c8;
-		spi0 = &qspi;
-		spi1 = &msiof0;
-		spi2 = &msiof1;
-		spi3 = &msiof2;
-		vin0 = &vin0;
-		vin1 = &vin1;
-		vin2 = &vin2;
-	};
-
-	/*
-	 * The external audio clocks are configured as 0 Hz fixed frequency
-	 * clocks by default.
-	 * Boards that provide audio clocks should override them.
-	 */
-	audio_clk_a: audio_clk_a {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clk_b: audio_clk_b {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clk_c: audio_clk_c {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	/* External CAN clock */
-	can_clk: can {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1500000000>;
-			clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
-			power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-			voltage-tolerance = <1>; /* 1% */
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1500000 1000000>,
-					   <1312500 1000000>,
-					   <1125000 1000000>,
-					   < 937500 1000000>,
-					   < 750000 1000000>,
-					   < 375000 1000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1500000000>;
-			clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
-			power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-			voltage-tolerance = <1>; /* 1% */
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1500000 1000000>,
-					   <1312500 1000000>,
-					   <1125000 1000000>,
-					   < 937500 1000000>,
-					   < 750000 1000000>,
-					   < 375000 1000000>;
-		};
-
-		L2_CA15: cache-controller-0 {
-			compatible = "cache";
-			power-domains = <&sysc R8A7791_PD_CA15_SCU>;
-			cache-unified;
-			cache-level = <2>;
-		};
-	};
-
-	/* External root clock */
-	extal_clk: extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	/* External PCIe clock - can be overridden by the board */
-	pcie_bus_clk: pcie_bus {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	/* External SCIF clock */
-	scif_clk: scif {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		rwdt: watchdog@e6020000 {
-			compatible = "renesas,r8a7791-wdt",
-				     "renesas,rcar-gen2-wdt";
-			reg = <0 0xe6020000 0 0x0c>;
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 402>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 402>;
-			status = "disabled";
-		};
-
-		gpio0: gpio@e6050000 {
-			compatible = "renesas,gpio-r8a7791",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6050000 0 0x50>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 0 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 912>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 912>;
-		};
-
-		gpio1: gpio@e6051000 {
-			compatible = "renesas,gpio-r8a7791",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6051000 0 0x50>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 32 26>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 911>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 911>;
-		};
-
-		gpio2: gpio@e6052000 {
-			compatible = "renesas,gpio-r8a7791",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6052000 0 0x50>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 64 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 910>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 910>;
-		};
-
-		gpio3: gpio@e6053000 {
-			compatible = "renesas,gpio-r8a7791",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6053000 0 0x50>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 96 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 909>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 909>;
-		};
-
-		gpio4: gpio@e6054000 {
-			compatible = "renesas,gpio-r8a7791",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6054000 0 0x50>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 128 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 908>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 908>;
-		};
-
-		gpio5: gpio@e6055000 {
-			compatible = "renesas,gpio-r8a7791",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055000 0 0x50>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 160 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 907>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 907>;
-		};
-
-		gpio6: gpio@e6055400 {
-			compatible = "renesas,gpio-r8a7791",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055400 0 0x50>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 192 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 905>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 905>;
-		};
-
-		gpio7: gpio@e6055800 {
-			compatible = "renesas,gpio-r8a7791",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055800 0 0x50>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 224 26>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 904>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 904>;
-		};
-
-		pfc: pinctrl@e6060000 {
-			compatible = "renesas,pfc-r8a7791";
-			reg = <0 0xe6060000 0 0x250>;
-		};
-
-		tpu: pwm@e60f0000 {
-			compatible = "renesas,tpu-r8a7791", "renesas,tpu";
-			reg = <0 0xe60f0000 0 0x148>;
-			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 304>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 304>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		cpg: clock-controller@e6150000 {
-			compatible = "renesas,r8a7791-cpg-mssr";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>, <&usb_extal_clk>;
-			clock-names = "extal", "usb_extal";
-			#clock-cells = <2>;
-			#power-domain-cells = <0>;
-			#reset-cells = <1>;
-		};
-
-		apmu@e6152000 {
-			compatible = "renesas,r8a7791-apmu", "renesas,apmu";
-			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0>, <&cpu1>;
-		};
-
-		rst: reset-controller@e6160000 {
-			compatible = "renesas,r8a7791-rst";
-			reg = <0 0xe6160000 0 0x0100>;
-		};
-
-		sysc: system-controller@e6180000 {
-			compatible = "renesas,r8a7791-sysc";
-			reg = <0 0xe6180000 0 0x0200>;
-			#power-domain-cells = <1>;
-		};
-
-		irqc0: interrupt-controller@e61c0000 {
-			compatible = "renesas,irqc-r8a7791", "renesas,irqc";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 407>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 407>;
-		};
-
-		thermal: thermal@e61f0000 {
-			compatible = "renesas,thermal-r8a7791",
-				     "renesas,rcar-gen2-thermal",
-				     "renesas,rcar-thermal";
-			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 522>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 522>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		ipmmu_sy0: iommu@e6280000 {
-			compatible = "renesas,ipmmu-r8a7791",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6280000 0 0x1000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_sy1: iommu@e6290000 {
-			compatible = "renesas,ipmmu-r8a7791",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6290000 0 0x1000>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_ds: iommu@e6740000 {
-			compatible = "renesas,ipmmu-r8a7791",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6740000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mp: iommu@ec680000 {
-			compatible = "renesas,ipmmu-r8a7791",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xec680000 0 0x1000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mx: iommu@fe951000 {
-			compatible = "renesas,ipmmu-r8a7791",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xfe951000 0 0x1000>;
-			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_rt: iommu@ffc80000 {
-			compatible = "renesas,ipmmu-r8a7791",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xffc80000 0 0x1000>;
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_gp: iommu@e62a0000 {
-			compatible = "renesas,ipmmu-r8a7791",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe62a0000 0 0x1000>;
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		icram0:	sram@e63a0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63a0000 0 0x12000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63a0000 0x12000>;
-		};
-
-		icram1:	sram@e63c0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63c0000 0 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63c0000 0x1000>;
-
-			smp-sram@0 {
-				compatible = "renesas,smp-sram";
-				reg = <0 0x100>;
-			};
-		};
-
-		/* The memory map in the User's Manual maps the cores to
-		 * bus numbers
-		 */
-		i2c0: i2c@e6508000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7791",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6508000 0 0x40>;
-			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 931>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 931>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@e6518000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7791",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6518000 0 0x40>;
-			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 930>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 930>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@e6530000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7791",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6530000 0 0x40>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 929>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 929>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@e6540000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7791",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6540000 0 0x40>;
-			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 928>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 928>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c4: i2c@e6520000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7791",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6520000 0 0x40>;
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 927>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 927>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c5: i2c@e6528000 {
-			/* doesn't need pinmux */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7791",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6528000 0 0x40>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 925>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 925>;
-			i2c-scl-internal-delay-ns = <110>;
-			status = "disabled";
-		};
-
-		i2c6: i2c@e60b0000 {
-			/* doesn't need pinmux */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7791",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe60b0000 0 0x425>;
-			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 926>;
-			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
-			       <&dmac1 0x77>, <&dmac1 0x78>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 926>;
-			status = "disabled";
-		};
-
-		i2c7: i2c@e6500000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7791",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6500000 0 0x425>;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 318>;
-			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
-			       <&dmac1 0x61>, <&dmac1 0x62>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 318>;
-			status = "disabled";
-		};
-
-		i2c8: i2c@e6510000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7791",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6510000 0 0x425>;
-			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 323>;
-			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
-			       <&dmac1 0x65>, <&dmac1 0x66>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 323>;
-			status = "disabled";
-		};
-
-		hsusb: usb@e6590000 {
-			compatible = "renesas,usbhs-r8a7791",
-				     "renesas,rcar-gen2-usbhs";
-			reg = <0 0xe6590000 0 0x100>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 704>;
-			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
-			       <&usb_dmac1 0>, <&usb_dmac1 1>;
-			dma-names = "ch0", "ch1", "ch2", "ch3";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			renesas,buswait = <4>;
-			phys = <&usb0 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		usbphy: usb-phy-controller@e6590100 {
-			compatible = "renesas,usb-phy-r8a7791",
-				     "renesas,rcar-gen2-usb-phy";
-			reg = <0 0xe6590100 0 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cpg CPG_MOD 704>;
-			clock-names = "usbhs";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			status = "disabled";
-
-			usb0: usb-phy@0 {
-				reg = <0>;
-				#phy-cells = <1>;
-			};
-			usb2: usb-phy@2 {
-				reg = <2>;
-				#phy-cells = <1>;
-			};
-		};
-
-		usb_dmac0: dma-controller@e65a0000 {
-			compatible = "renesas,r8a7791-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 330>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 330>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		usb_dmac1: dma-controller@e65b0000 {
-			compatible = "renesas,r8a7791-usb-dmac",
-				     "renesas,usb-dmac";
-			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ch0", "ch1";
-			clocks = <&cpg CPG_MOD 331>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 331>;
-			#dma-cells = <1>;
-			dma-channels = <2>;
-		};
-
-		dmac0: dma-controller@e6700000 {
-			compatible = "renesas,dmac-r8a7791",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 219>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 219>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		dmac1: dma-controller@e6720000 {
-			compatible = "renesas,dmac-r8a7791",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 218>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 218>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		avb: ethernet@e6800000 {
-			compatible = "renesas,etheravb-r8a7791",
-				     "renesas,etheravb-rcar-gen2";
-			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
-			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 812>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 812>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		qspi: spi@e6b10000 {
-			compatible = "renesas,qspi-r8a7791", "renesas,qspi";
-			reg = <0 0xe6b10000 0 0x2c>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 917>;
-			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
-			       <&dmac1 0x17>, <&dmac1 0x18>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 917>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		scifa0: serial@e6c40000 {
-			compatible = "renesas,scifa-r8a7791",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c40000 0 64>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 204>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
-			       <&dmac1 0x21>, <&dmac1 0x22>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 204>;
-			status = "disabled";
-		};
-
-		scifa1: serial@e6c50000 {
-			compatible = "renesas,scifa-r8a7791",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c50000 0 64>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 203>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
-			       <&dmac1 0x25>, <&dmac1 0x26>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 203>;
-			status = "disabled";
-		};
-
-		scifa2: serial@e6c60000 {
-			compatible = "renesas,scifa-r8a7791",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c60000 0 64>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 202>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
-			       <&dmac1 0x27>, <&dmac1 0x28>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 202>;
-			status = "disabled";
-		};
-
-		scifa3: serial@e6c70000 {
-			compatible = "renesas,scifa-r8a7791",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c70000 0 64>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1106>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
-			       <&dmac1 0x1b>, <&dmac1 0x1c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 1106>;
-			status = "disabled";
-		};
-
-		scifa4: serial@e6c78000 {
-			compatible = "renesas,scifa-r8a7791",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c78000 0 64>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1107>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
-			       <&dmac1 0x1f>, <&dmac1 0x20>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 1107>;
-			status = "disabled";
-		};
-
-		scifa5: serial@e6c80000 {
-			compatible = "renesas,scifa-r8a7791",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c80000 0 64>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1108>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
-			       <&dmac1 0x23>, <&dmac1 0x24>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 1108>;
-			status = "disabled";
-		};
-
-		scifb0: serial@e6c20000 {
-			compatible = "renesas,scifb-r8a7791",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c20000 0 0x100>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 206>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
-			       <&dmac1 0x3d>, <&dmac1 0x3e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 206>;
-			status = "disabled";
-		};
-
-		scifb1: serial@e6c30000 {
-			compatible = "renesas,scifb-r8a7791",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c30000 0 0x100>;
-			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 207>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
-			       <&dmac1 0x19>, <&dmac1 0x1a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 207>;
-			status = "disabled";
-		};
-
-		scifb2: serial@e6ce0000 {
-			compatible = "renesas,scifb-r8a7791",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6ce0000 0 0x100>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 216>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
-			       <&dmac1 0x1d>, <&dmac1 0x1e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 216>;
-			status = "disabled";
-		};
-
-		scif0: serial@e6e60000 {
-			compatible = "renesas,scif-r8a7791",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e60000 0 64>;
-			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
-			       <&dmac1 0x29>, <&dmac1 0x2a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 721>;
-			status = "disabled";
-		};
-
-		scif1: serial@e6e68000 {
-			compatible = "renesas,scif-r8a7791",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e68000 0 64>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
-			       <&dmac1 0x2d>, <&dmac1 0x2e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 720>;
-			status = "disabled";
-		};
-
-		scif2: serial@e6e58000 {
-			compatible = "renesas,scif-r8a7791",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e58000 0 64>;
-			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
-			       <&dmac1 0x2b>, <&dmac1 0x2c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 719>;
-			status = "disabled";
-		};
-
-		scif3: serial@e6ea8000 {
-			compatible = "renesas,scif-r8a7791",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ea8000 0 64>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
-			       <&dmac1 0x2f>, <&dmac1 0x30>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 718>;
-			status = "disabled";
-		};
-
-		scif4: serial@e6ee0000 {
-			compatible = "renesas,scif-r8a7791",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee0000 0 64>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
-			       <&dmac1 0xfb>, <&dmac1 0xfc>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 715>;
-			status = "disabled";
-		};
-
-		scif5: serial@e6ee8000 {
-			compatible = "renesas,scif-r8a7791",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee8000 0 64>;
-			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
-			       <&dmac1 0xfd>, <&dmac1 0xfe>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 714>;
-			status = "disabled";
-		};
-
-		hscif0: serial@e62c0000 {
-			compatible = "renesas,hscif-r8a7791",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c0000 0 96>;
-			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
-			       <&dmac1 0x39>, <&dmac1 0x3a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 717>;
-			status = "disabled";
-		};
-
-		hscif1: serial@e62c8000 {
-			compatible = "renesas,hscif-r8a7791",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c8000 0 96>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
-			       <&dmac1 0x4d>, <&dmac1 0x4e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 716>;
-			status = "disabled";
-		};
-
-		hscif2: serial@e62d0000 {
-			compatible = "renesas,hscif-r8a7791",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62d0000 0 96>;
-			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
-			       <&dmac1 0x3b>, <&dmac1 0x3c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 713>;
-			status = "disabled";
-		};
-
-		msiof0: spi@e6e20000 {
-			compatible = "renesas,msiof-r8a7791",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e20000 0 0x0064>;
-			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 000>;
-			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
-			       <&dmac1 0x51>, <&dmac1 0x52>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		msiof1: spi@e6e10000 {
-			compatible = "renesas,msiof-r8a7791",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e10000 0 0x0064>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 208>;
-			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
-			       <&dmac1 0x55>, <&dmac1 0x56>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 208>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		msiof2: spi@e6e00000 {
-			compatible = "renesas,msiof-r8a7791",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e00000 0 0x0064>;
-			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 205>;
-			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
-			       <&dmac1 0x41>, <&dmac1 0x42>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 205>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pwm0: pwm@e6e30000 {
-			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
-			reg = <0 0xe6e30000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm1: pwm@e6e31000 {
-			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
-			reg = <0 0xe6e31000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm2: pwm@e6e32000 {
-			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
-			reg = <0 0xe6e32000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm3: pwm@e6e33000 {
-			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
-			reg = <0 0xe6e33000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm4: pwm@e6e34000 {
-			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
-			reg = <0 0xe6e34000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm5: pwm@e6e35000 {
-			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
-			reg = <0 0xe6e35000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		pwm6: pwm@e6e36000 {
-			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
-			reg = <0 0xe6e36000 0 0x8>;
-			clocks = <&cpg CPG_MOD 523>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 523>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		adc: adc@e6e54000 {
-			compatible = "renesas,r8a7791-gyroadc",
-				     "renesas,rcar-gyroadc";
-			reg = <0 0xe6e54000 0 64>;
-			clocks = <&cpg CPG_MOD 901>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 901>;
-			status = "disabled";
-		};
-
-		can0: can@e6e80000 {
-			compatible = "renesas,can-r8a7791",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e80000 0 0x1000>;
-			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 916>,
-				 <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 916>;
-			status = "disabled";
-		};
-
-		can1: can@e6e88000 {
-			compatible = "renesas,can-r8a7791",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e88000 0 0x1000>;
-			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 915>,
-				 <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 915>;
-			status = "disabled";
-		};
-
-		vin0: video@e6ef0000 {
-			compatible = "renesas,vin-r8a7791",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef0000 0 0x1000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 811>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 811>;
-			status = "disabled";
-		};
-
-		vin1: video@e6ef1000 {
-			compatible = "renesas,vin-r8a7791",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef1000 0 0x1000>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 810>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 810>;
-			status = "disabled";
-		};
-
-		vin2: video@e6ef2000 {
-			compatible = "renesas,vin-r8a7791",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef2000 0 0x1000>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 809>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 809>;
-			status = "disabled";
-		};
-
-		rcar_sound: sound@ec500000 {
-			/*
-			 * #sound-dai-cells is required if simple-card
-			 *
-			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
-			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
-			 */
-			compatible = "renesas,rcar_sound-r8a7791",
-				     "renesas,rcar_sound-gen2";
-			reg = <0 0xec500000 0 0x1000>, /* SCU */
-			      <0 0xec5a0000 0 0x100>,  /* ADG */
-			      <0 0xec540000 0 0x1000>, /* SSIU */
-			      <0 0xec541000 0 0x280>,  /* SSI */
-			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
-			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
-			clocks = <&cpg CPG_MOD 1005>,
-				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
-				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
-				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
-				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
-				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
-				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
-				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
-				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
-				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
-				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
-				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A7791_CLK_M2>;
-			clock-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
-				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
-				      "ssi.1", "ssi.0", "src.9", "src.8",
-				      "src.7", "src.6", "src.5", "src.4",
-				      "src.3", "src.2", "src.1", "src.0",
-				      "ctu.0", "ctu.1",
-				      "mix.0", "mix.1",
-				      "dvc.0", "dvc.1",
-				      "clk_a", "clk_b", "clk_c", "clk_i";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 1005>,
-				 <&cpg 1006>, <&cpg 1007>,
-				 <&cpg 1008>, <&cpg 1009>,
-				 <&cpg 1010>, <&cpg 1011>,
-				 <&cpg 1012>, <&cpg 1013>,
-				 <&cpg 1014>, <&cpg 1015>;
-			reset-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
-				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
-				      "ssi.1", "ssi.0";
-
-			status = "disabled";
-
-			rcar_sound,dvc {
-				dvc0: dvc-0 {
-					dmas = <&audma1 0xbc>;
-					dma-names = "tx";
-				};
-				dvc1: dvc-1 {
-					dmas = <&audma1 0xbe>;
-					dma-names = "tx";
-				};
-			};
-
-			rcar_sound,mix {
-				mix0: mix-0 { };
-				mix1: mix-1 { };
-			};
-
-			rcar_sound,ctu {
-				ctu00: ctu-0 { };
-				ctu01: ctu-1 { };
-				ctu02: ctu-2 { };
-				ctu03: ctu-3 { };
-				ctu10: ctu-4 { };
-				ctu11: ctu-5 { };
-				ctu12: ctu-6 { };
-				ctu13: ctu-7 { };
-			};
-
-			rcar_sound,src {
-				src0: src-0 {
-					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x85>, <&audma1 0x9a>;
-					dma-names = "rx", "tx";
-				};
-				src1: src-1 {
-					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x87>, <&audma1 0x9c>;
-					dma-names = "rx", "tx";
-				};
-				src2: src-2 {
-					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x89>, <&audma1 0x9e>;
-					dma-names = "rx", "tx";
-				};
-				src3: src-3 {
-					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
-					dma-names = "rx", "tx";
-				};
-				src4: src-4 {
-					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
-					dma-names = "rx", "tx";
-				};
-				src5: src-5 {
-					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
-					dma-names = "rx", "tx";
-				};
-				src6: src-6 {
-					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x91>, <&audma1 0xb4>;
-					dma-names = "rx", "tx";
-				};
-				src7: src-7 {
-					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x93>, <&audma1 0xb6>;
-					dma-names = "rx", "tx";
-				};
-				src8: src-8 {
-					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x95>, <&audma1 0xb8>;
-					dma-names = "rx", "tx";
-				};
-				src9: src-9 {
-					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x97>, <&audma1 0xba>;
-					dma-names = "rx", "tx";
-				};
-			};
-
-			rcar_sound,ssi {
-				ssi0: ssi-0 {
-					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x01>, <&audma1 0x02>,
-					       <&audma0 0x15>, <&audma1 0x16>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi1: ssi-1 {
-					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x03>, <&audma1 0x04>,
-					       <&audma0 0x49>, <&audma1 0x4a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi2: ssi-2 {
-					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x05>, <&audma1 0x06>,
-					       <&audma0 0x63>, <&audma1 0x64>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi3: ssi-3 {
-					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x07>, <&audma1 0x08>,
-					       <&audma0 0x6f>, <&audma1 0x70>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi4: ssi-4 {
-					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x09>, <&audma1 0x0a>,
-					       <&audma0 0x71>, <&audma1 0x72>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi5: ssi-5 {
-					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0b>, <&audma1 0x0c>,
-					       <&audma0 0x73>, <&audma1 0x74>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi6: ssi-6 {
-					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0d>, <&audma1 0x0e>,
-					       <&audma0 0x75>, <&audma1 0x76>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi7: ssi-7 {
-					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0f>, <&audma1 0x10>,
-					       <&audma0 0x79>, <&audma1 0x7a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi8: ssi-8 {
-					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x11>, <&audma1 0x12>,
-					       <&audma0 0x7b>, <&audma1 0x7c>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi9: ssi-9 {
-					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x13>, <&audma1 0x14>,
-					       <&audma0 0x7d>, <&audma1 0x7e>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-			};
-		};
-
-		audma0: dma-controller@ec700000 {
-			compatible = "renesas,dmac-r8a7791",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 502>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 502>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		audma1: dma-controller@ec720000 {
-			compatible = "renesas,dmac-r8a7791",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 501>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 501>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		xhci: usb@ee000000 {
-			compatible = "renesas,xhci-r8a7791",
-				     "renesas,rcar-gen2-xhci";
-			reg = <0 0xee000000 0 0xc00>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 328>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 328>;
-			phys = <&usb2 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		pci0: pci@ee090000 {
-			compatible = "renesas,pci-r8a7791",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee090000 0 0xc00>,
-			      <0 0xee080000 0 0x1100>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x800 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x1000 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-		};
-
-		pci1: pci@ee0d0000 {
-			compatible = "renesas,pci-r8a7791",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee0d0000 0 0xc00>,
-			      <0 0xee0c0000 0 0x1100>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <1 1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x10800 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x11000 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-		};
-
-		sdhi0: mmc@ee100000 {
-			compatible = "renesas,sdhi-r8a7791",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee100000 0 0x328>;
-			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
-			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
-			       <&dmac1 0xcd>, <&dmac1 0xce>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <195000000>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 314>;
-			status = "disabled";
-		};
-
-		sdhi1: mmc@ee140000 {
-			compatible = "renesas,sdhi-r8a7791",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee140000 0 0x100>;
-			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
-			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
-			       <&dmac1 0xc1>, <&dmac1 0xc2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 312>;
-			status = "disabled";
-		};
-
-		sdhi2: mmc@ee160000 {
-			compatible = "renesas,sdhi-r8a7791",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee160000 0 0x100>;
-			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
-			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
-			       <&dmac1 0xd3>, <&dmac1 0xd4>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 311>;
-			status = "disabled";
-		};
-
-		mmcif0: mmc@ee200000 {
-			compatible = "renesas,mmcif-r8a7791",
-				     "renesas,sh-mmcif";
-			reg = <0 0xee200000 0 0x80>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 315>;
-			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
-			       <&dmac1 0xd1>, <&dmac1 0xd2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 315>;
-			reg-io-width = <4>;
-			status = "disabled";
-			max-frequency = <97500000>;
-		};
-
-		sata0: sata@ee300000 {
-			compatible = "renesas,sata-r8a7791",
-				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee300000 0 0x200000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 815>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 815>;
-			status = "disabled";
-		};
-
-		sata1: sata@ee500000 {
-			compatible = "renesas,sata-r8a7791",
-				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee500000 0 0x200000>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 814>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 814>;
-			status = "disabled";
-		};
-
-		ether: ethernet@ee700000 {
-			compatible = "renesas,ether-r8a7791",
-				     "renesas,rcar-gen2-ether";
-			reg = <0 0xee700000 0 0x400>;
-			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 813>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 813>;
-			phy-mode = "rmii";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@f1001000 {
-			compatible = "arm,gic-400";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
-			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&cpg CPG_MOD 408>;
-			clock-names = "clk";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 408>;
-		};
-
-		pciec: pcie@fe000000 {
-			compatible = "renesas,pcie-r8a7791",
-				     "renesas,pcie-rcar-gen2";
-			reg = <0 0xfe000000 0 0x80000>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			bus-range = <0x00 0xff>;
-			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
-				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
-				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
-				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
-			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
-				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
-			clock-names = "pcie", "pcie_bus";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 319>;
-			status = "disabled";
-		};
-
-		vsp@fe928000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe928000 0 0x8000>;
-			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 131>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 131>;
-		};
-
-		vsp@fe930000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe930000 0 0x8000>;
-			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 128>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 128>;
-		};
-
-		vsp@fe938000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe938000 0 0x8000>;
-			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 127>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 127>;
-		};
-
-		fdp1@fe940000 {
-			compatible = "renesas,fdp1";
-			reg = <0 0xfe940000 0 0x2400>;
-			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 119>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 119>;
-		};
-
-		fdp1@fe944000 {
-			compatible = "renesas,fdp1";
-			reg = <0 0xfe944000 0 0x2400>;
-			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 118>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 118>;
-		};
-
-		jpu: jpeg-codec@fe980000 {
-			compatible = "renesas,jpu-r8a7791",
-				     "renesas,rcar-gen2-jpu";
-			reg = <0 0xfe980000 0 0x10300>;
-			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 106>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 106>;
-		};
-
-		du: display@feb00000 {
-			compatible = "renesas,du-r8a7791";
-			reg = <0 0xfeb00000 0 0x40000>;
-			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
-			clock-names = "du.0", "du.1";
-			resets = <&cpg 724>;
-			reset-names = "du.0";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					du_out_rgb: endpoint {
-					};
-				};
-				port@1 {
-					reg = <1>;
-					du_out_lvds0: endpoint {
-						remote-endpoint = <&lvds0_in>;
-					};
-				};
-			};
-		};
-
-		lvds0: lvds@feb90000 {
-			compatible = "renesas,r8a7791-lvds";
-			reg = <0 0xfeb90000 0 0x1c>;
-			clocks = <&cpg CPG_MOD 726>;
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 726>;
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					lvds0_in: endpoint {
-						remote-endpoint = <&du_out_lvds0>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					lvds0_out: endpoint {
-					};
-				};
-			};
-		};
-
-		prr: chipid@ff000044 {
-			compatible = "renesas,prr";
-			reg = <0 0xff000044 0 4>;
-		};
-
-		cmt0: timer@ffca0000 {
-			compatible = "renesas,r8a7791-cmt0",
-				     "renesas,rcar-gen2-cmt0";
-			reg = <0 0xffca0000 0 0x1004>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 124>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 124>;
-
-			status = "disabled";
-		};
-
-		cmt1: timer@e6130000 {
-			compatible = "renesas,r8a7791-cmt1",
-				     "renesas,rcar-gen2-cmt1";
-			reg = <0 0xe6130000 0 0x1004>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 329>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-			resets = <&cpg 329>;
-
-			status = "disabled";
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	/* External USB clock - can be overridden by the board */
-	usb_extal_clk: usb_extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <48000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
deleted file mode 100644
index c66de9dd12dfc..0000000000000
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ /dev/null
@@ -1,364 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Blanche board
- *
- * Copyright (C) 2014 Renesas Electronics Corporation
- * Copyright (C) 2016 Cogent  Embedded, Inc.
- */
-
-/dts-v1/;
-#include "r8a7792.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Blanche";
-	compatible = "renesas,blanche", "renesas,r8a7792";
-
-	aliases {
-		serial0 = &scif0;
-		serial1 = &scif3;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	d3_3v: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "D3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	ethernet@18000000 {
-		compatible = "smsc,lan89218", "smsc,lan9115";
-		reg = <0 0x18000000 0 0x100>;
-		phy-mode = "mii";
-		interrupt-parent = <&irqc>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		smsc,irq-push-pull;
-		reg-io-width = <4>;
-		vddvario-supply = <&d3_3v>;
-		vdd33a-supply = <&d3_3v>;
-
-		pinctrl-0 = <&lan89218_pins>;
-		pinctrl-names = "default";
-	};
-
-	vga-encoder {
-		compatible = "adi,adv7123";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7123_in: endpoint {
-					remote-endpoint = <&du_out_rgb1>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				adv7123_out: endpoint {
-					remote-endpoint = <&vga_in>;
-				};
-			};
-		};
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_in: endpoint {
-				remote-endpoint = <&adv7123_out>;
-			};
-		};
-	};
-
-	x1_clk: x1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <74250000>;
-	};
-
-	x2_clk: x2 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <65000000>;
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keyboard_pins>;
-		pinctrl-names = "default";
-
-		key-1 {
-			linux,code = <KEY_1>;
-			label = "SW2-1";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
-		};
-		key-2 {
-			linux,code = <KEY_2>;
-			label = "SW2-2";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
-		};
-		key-3 {
-			linux,code = <KEY_3>;
-			label = "SW2-3";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
-		};
-		key-4 {
-			linux,code = <KEY_4>;
-			label = "SW2-4";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
-		};
-		key-a {
-			linux,code = <KEY_A>;
-			label = "SW24";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
-		};
-		key-b {
-			linux,code = <KEY_B>;
-			label = "SW25";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led17 {
-			gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
-		};
-		led18 {
-			gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
-		};
-		led19 {
-			gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
-		};
-		led20 {
-			gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	vcc_sdhi0: regulator-vcc-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&can_clk {
-	clock-frequency = <48000000>;
-};
-
-&pfc {
-	scif0_pins: scif0 {
-		groups = "scif0_data";
-		function = "scif0";
-	};
-
-	scif3_pins: scif3 {
-		groups = "scif3_data";
-		function = "scif3";
-	};
-
-	lan89218_pins: lan89218 {
-		intc {
-			groups = "intc_irq0";
-			function = "intc";
-		};
-		lbsc {
-			groups = "lbsc_ex_cs0";
-			function = "lbsc";
-		};
-	};
-
-	can0_pins: can0 {
-		groups = "can0_data", "can_clk";
-		function = "can0";
-	};
-
-	sdhi0_pins: sdhi0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-	};
-
-	du0_pins: du0 {
-		groups = "du0_rgb888", "du0_sync", "du0_disp";
-		function = "du0";
-	};
-
-	du1_pins: du1 {
-		groups = "du1_rgb666", "du1_sync", "du1_disp";
-		function = "du1";
-	};
-
-	keyboard_pins: keyboard {
-		pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_02";
-		bias-pull-up;
-	};
-
-	pmic_irq_pins: pmicirq {
-		groups = "intc_irq2";
-		function = "intc";
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif3 {
-	pinctrl-0 = <&scif3_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&can0 {
-	pinctrl-0 = <&can0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	hdmi@39 {
-		compatible = "adi,adv7511w";
-		reg = <0x39>;
-		interrupt-parent = <&irqc>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7511_in: endpoint {
-					remote-endpoint = <&du_out_rgb0>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				adv7511_out: endpoint {
-					remote-endpoint = <&hdmi_con>;
-				};
-			};
-		};
-	};
-};
-
-&iic3 {
-	status = "okay";
-
-	pmic@58 {
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_irq_pins>;
-		interrupt-parent = <&irqc>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		watchdog {
-			compatible = "dlg,da9063-watchdog";
-		};
-	};
-};
-
-&du {
-	pinctrl-0 = <&du0_pins>, <&du1_pins>;
-	pinctrl-names = "default";
-
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
-	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
-	status = "okay";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7511_in>;
-			};
-		};
-		port@1 {
-			endpoint {
-				remote-endpoint = <&adv7123_in>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
deleted file mode 100644
index 434e4655be9da..0000000000000
--- a/arch/arm/boot/dts/r8a7792-wheat.dts
+++ /dev/null
@@ -1,329 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Wheat board
- *
- * Copyright (C) 2016 Renesas Electronics Corporation
- * Copyright (C) 2016 Cogent  Embedded, Inc.
- */
-
-/dts-v1/;
-#include "r8a7792.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Wheat";
-	compatible = "renesas,wheat", "renesas,r8a7792";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	d3_3v: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "D3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	ethernet@18000000 {
-		compatible = "smsc,lan89218", "smsc,lan9115";
-		reg = <0 0x18000000 0 0x100>;
-		phy-mode = "mii";
-		interrupt-parent = <&irqc>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		smsc,irq-push-pull;
-		smsc,save-mac-address;
-		reg-io-width = <4>;
-		vddvario-supply = <&d3_3v>;
-		vdd33a-supply = <&d3_3v>;
-
-		pinctrl-0 = <&lan89218_pins>;
-		pinctrl-names = "default";
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		key-a {
-			linux,code = <KEY_A>;
-			label = "SW2";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
-		};
-		key-b {
-			linux,code = <KEY_B>;
-			label = "SW3";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	vcc_sdhi0: regulator-vcc-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	hdmi-out0 {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con0: endpoint {
-				remote-endpoint = <&adv7513_0_out>;
-			};
-		};
-	};
-
-	hdmi-out1 {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con1: endpoint {
-				remote-endpoint = <&adv7513_1_out>;
-			};
-		};
-	};
-
-	osc2_clk: osc2 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <74250000>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	scif0_pins: scif0 {
-		groups = "scif0_data";
-		function = "scif0";
-	};
-
-	lan89218_pins: lan89218 {
-		intc {
-			groups = "intc_irq0";
-			function = "intc";
-		};
-		lbsc {
-			groups = "lbsc_ex_cs0";
-			function = "lbsc";
-		};
-	};
-
-	can0_pins: can0 {
-		groups = "can0_data";
-		function = "can0";
-	};
-
-	can1_pins: can1 {
-		groups = "can1_data";
-		function = "can1";
-	};
-
-	sdhi0_pins: sdhi0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-	};
-
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data4";
-		function = "qspi";
-	};
-
-	du0_pins: du0 {
-		groups = "du0_rgb888", "du0_sync", "du0_disp";
-		function = "du0";
-	};
-
-	du1_pins: du1 {
-		groups = "du1_rgb666", "du1_sync", "du1_disp";
-		function = "du1";
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&can0 {
-	pinctrl-0 = <&can0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-0 = <&can1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		spi-cpol;
-		spi-cpha;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
-	};
-};
-
-&i2c4 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	/*
-	 * The adv75xx resets its addresses to defaults during low power mode.
-	 * Because we have two ADV7513 devices on the same bus, we must change
-	 * both of them away from the defaults so that they do not conflict.
-	 */
-	hdmi@3d {
-		compatible = "adi,adv7513";
-		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
-		reg-names = "main", "edid", "cec", "packet";
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7513_0_in: endpoint {
-					remote-endpoint = <&du_out_rgb0>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				adv7513_0_out: endpoint {
-					remote-endpoint = <&hdmi_con0>;
-				};
-			};
-		};
-	};
-
-	hdmi@39 {
-		compatible = "adi,adv7513";
-		reg = <0x39>, <0x49>, <0x29>, <0x59>;
-		reg-names = "main", "edid", "cec", "packet";
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7513_1_in: endpoint {
-					remote-endpoint = <&du_out_rgb1>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				adv7513_1_out: endpoint {
-					remote-endpoint = <&hdmi_con1>;
-				};
-			};
-		};
-	};
-};
-
-&du {
-	pinctrl-0 = <&du0_pins>, <&du1_pins>;
-	pinctrl-names = "default";
-
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&osc2_clk>;
-	clock-names = "du.0", "du.1", "dclkin.0";
-	status = "okay";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7513_0_in>;
-			};
-		};
-		port@1 {
-			endpoint {
-				remote-endpoint = <&adv7513_1_in>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
deleted file mode 100644
index a6d9367f8fa04..0000000000000
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ /dev/null
@@ -1,928 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Car V2H (R8A77920) SoC
- *
- * Copyright (C) 2016 Cogent Embedded Inc.
- */
-
-#include <dt-bindings/clock/r8a7792-cpg-mssr.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/r8a7792-sysc.h>
-
-/ {
-	compatible = "renesas,r8a7792";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &iic3;
-		spi0 = &qspi;
-		spi1 = &msiof0;
-		spi2 = &msiof1;
-		vin0 = &vin0;
-		vin1 = &vin1;
-		vin2 = &vin2;
-		vin3 = &vin3;
-		vin4 = &vin4;
-		vin5 = &vin5;
-	};
-
-	/* External CAN clock */
-	can_clk: can {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-			clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
-			power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1000000000>;
-			clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
-			power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA15>;
-		};
-
-		L2_CA15: cache-controller-0 {
-			compatible = "cache";
-			cache-unified;
-			cache-level = <2>;
-			power-domains = <&sysc R8A7792_PD_CA15_SCU>;
-		};
-	};
-
-	/* External root clock */
-	extal_clk: extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	/* External SCIF clock */
-	scif_clk: scif {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		rwdt: watchdog@e6020000 {
-			compatible = "renesas,r8a7792-wdt",
-				     "renesas,rcar-gen2-wdt";
-			reg = <0 0xe6020000 0 0x0c>;
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 402>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 402>;
-			status = "disabled";
-		};
-
-		gpio0: gpio@e6050000 {
-			compatible = "renesas,gpio-r8a7792",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6050000 0 0x50>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 0 29>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 912>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 912>;
-		};
-
-		gpio1: gpio@e6051000 {
-			compatible = "renesas,gpio-r8a7792",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6051000 0 0x50>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 32 23>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 911>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 911>;
-		};
-
-		gpio2: gpio@e6052000 {
-			compatible = "renesas,gpio-r8a7792",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6052000 0 0x50>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 64 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 910>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 910>;
-		};
-
-		gpio3: gpio@e6053000 {
-			compatible = "renesas,gpio-r8a7792",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6053000 0 0x50>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 96 28>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 909>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 909>;
-		};
-
-		gpio4: gpio@e6054000 {
-			compatible = "renesas,gpio-r8a7792",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6054000 0 0x50>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 128 17>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 908>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 908>;
-		};
-
-		gpio5: gpio@e6055000 {
-			compatible = "renesas,gpio-r8a7792",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055000 0 0x50>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 160 17>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 907>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 907>;
-		};
-
-		gpio6: gpio@e6055100 {
-			compatible = "renesas,gpio-r8a7792",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055100 0 0x50>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 192 17>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 905>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 905>;
-		};
-
-		gpio7: gpio@e6055200 {
-			compatible = "renesas,gpio-r8a7792",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055200 0 0x50>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 224 17>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 904>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 904>;
-		};
-
-		gpio8: gpio@e6055300 {
-			compatible = "renesas,gpio-r8a7792",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055300 0 0x50>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 256 17>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 921>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 921>;
-		};
-
-		gpio9: gpio@e6055400 {
-			compatible = "renesas,gpio-r8a7792",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055400 0 0x50>;
-			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 288 17>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 919>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 919>;
-		};
-
-		gpio10: gpio@e6055500 {
-			compatible = "renesas,gpio-r8a7792",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055500 0 0x50>;
-			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 320 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 914>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 914>;
-		};
-
-		gpio11: gpio@e6055600 {
-			compatible = "renesas,gpio-r8a7792",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055600 0 0x50>;
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 352 30>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 913>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 913>;
-		};
-
-		pfc: pinctrl@e6060000 {
-			compatible = "renesas,pfc-r8a7792";
-			reg = <0 0xe6060000 0 0x144>;
-		};
-
-		cpg: clock-controller@e6150000 {
-			compatible = "renesas,r8a7792-cpg-mssr";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
-			clock-names = "extal";
-			#clock-cells = <2>;
-			#power-domain-cells = <0>;
-			#reset-cells = <1>;
-		};
-
-		apmu@e6152000 {
-			compatible = "renesas,r8a7792-apmu", "renesas,apmu";
-			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0>, <&cpu1>;
-		};
-
-		rst: reset-controller@e6160000 {
-			compatible = "renesas,r8a7792-rst";
-			reg = <0 0xe6160000 0 0x0100>;
-		};
-
-		sysc: system-controller@e6180000 {
-			compatible = "renesas,r8a7792-sysc";
-			reg = <0 0xe6180000 0 0x0200>;
-			#power-domain-cells = <1>;
-		};
-
-		irqc: interrupt-controller@e61c0000 {
-			compatible = "renesas,irqc-r8a7792", "renesas,irqc";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 407>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 407>;
-		};
-
-		icram0:	sram@e63a0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63a0000 0 0x12000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63a0000 0x12000>;
-		};
-
-		icram1:	sram@e63c0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63c0000 0 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63c0000 0x1000>;
-
-			smp-sram@0 {
-				compatible = "renesas,smp-sram";
-				reg = <0 0x100>;
-			};
-		};
-
-		/* I2C doesn't need pinmux */
-		i2c0: i2c@e6508000 {
-			compatible = "renesas,i2c-r8a7792",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6508000 0 0x40>;
-			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 931>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 931>;
-			i2c-scl-internal-delay-ns = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@e6518000 {
-			compatible = "renesas,i2c-r8a7792",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6518000 0 0x40>;
-			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 930>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 930>;
-			i2c-scl-internal-delay-ns = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@e6530000 {
-			compatible = "renesas,i2c-r8a7792",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6530000 0 0x40>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 929>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 929>;
-			i2c-scl-internal-delay-ns = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@e6540000 {
-			compatible = "renesas,i2c-r8a7792",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6540000 0 0x40>;
-			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 928>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 928>;
-			i2c-scl-internal-delay-ns = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c4: i2c@e6520000 {
-			compatible = "renesas,i2c-r8a7792",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6520000 0 0x40>;
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 927>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 927>;
-			i2c-scl-internal-delay-ns = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c5: i2c@e6528000 {
-			compatible = "renesas,i2c-r8a7792",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6528000 0 0x40>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 925>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 925>;
-			i2c-scl-internal-delay-ns = <110>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		iic3: i2c@e60b0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7792",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe60b0000 0 0x425>;
-			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 926>;
-			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
-			       <&dmac1 0x77>, <&dmac1 0x78>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 926>;
-			status = "disabled";
-		};
-
-		dmac0: dma-controller@e6700000 {
-			compatible = "renesas,dmac-r8a7792",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 219>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 219>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		dmac1: dma-controller@e6720000 {
-			compatible = "renesas,dmac-r8a7792",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 218>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 218>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		avb: ethernet@e6800000 {
-			compatible = "renesas,etheravb-r8a7792",
-				     "renesas,etheravb-rcar-gen2";
-			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
-			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 812>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 812>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		qspi: spi@e6b10000 {
-			compatible = "renesas,qspi-r8a7792", "renesas,qspi";
-			reg = <0 0xe6b10000 0 0x2c>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 917>;
-			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
-			       <&dmac1 0x17>, <&dmac1 0x18>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 917>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		scif0: serial@e6e60000 {
-			compatible = "renesas,scif-r8a7792",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e60000 0 64>;
-			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 721>,
-				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
-			       <&dmac1 0x29>, <&dmac1 0x2a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 721>;
-			status = "disabled";
-		};
-
-		scif1: serial@e6e68000 {
-			compatible = "renesas,scif-r8a7792",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e68000 0 64>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 720>,
-				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
-			       <&dmac1 0x2d>, <&dmac1 0x2e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 720>;
-			status = "disabled";
-		};
-
-		scif2: serial@e6e58000 {
-			compatible = "renesas,scif-r8a7792",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e58000 0 64>;
-			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 719>,
-				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
-			       <&dmac1 0x2b>, <&dmac1 0x2c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 719>;
-			status = "disabled";
-		};
-
-		scif3: serial@e6ea8000 {
-			compatible = "renesas,scif-r8a7792",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ea8000 0 64>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 718>,
-				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
-			       <&dmac1 0x2f>, <&dmac1 0x30>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 718>;
-			status = "disabled";
-		};
-
-		hscif0: serial@e62c0000 {
-			compatible = "renesas,hscif-r8a7792",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c0000 0 96>;
-			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 717>,
-				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
-			       <&dmac1 0x39>, <&dmac1 0x3a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 717>;
-			status = "disabled";
-		};
-
-		hscif1: serial@e62c8000 {
-			compatible = "renesas,hscif-r8a7792",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c8000 0 96>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 716>,
-				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
-			       <&dmac1 0x4d>, <&dmac1 0x4e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 716>;
-			status = "disabled";
-		};
-
-		msiof0: spi@e6e20000 {
-			compatible = "renesas,msiof-r8a7792",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e20000 0 0x0064>;
-			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 000>;
-			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
-			       <&dmac1 0x51>, <&dmac1 0x52>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		msiof1: spi@e6e10000 {
-			compatible = "renesas,msiof-r8a7792",
-				     "renesas,rcar-gen2-msiof";
-			reg = <0 0xe6e10000 0 0x0064>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 208>;
-			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
-			       <&dmac1 0x55>, <&dmac1 0x56>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 208>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		can0: can@e6e80000 {
-			compatible = "renesas,can-r8a7792",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e80000 0 0x1000>;
-			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 916>,
-				 <&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 916>;
-			status = "disabled";
-		};
-
-		can1: can@e6e88000 {
-			compatible = "renesas,can-r8a7792",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e88000 0 0x1000>;
-			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 915>,
-				 <&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 915>;
-			status = "disabled";
-		};
-
-		vin0: video@e6ef0000 {
-			compatible = "renesas,vin-r8a7792",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef0000 0 0x1000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 811>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 811>;
-			status = "disabled";
-		};
-
-		vin1: video@e6ef1000 {
-			compatible = "renesas,vin-r8a7792",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef1000 0 0x1000>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 810>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 810>;
-			status = "disabled";
-		};
-
-		vin2: video@e6ef2000 {
-			compatible = "renesas,vin-r8a7792",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef2000 0 0x1000>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 809>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 809>;
-			status = "disabled";
-		};
-
-		vin3: video@e6ef3000 {
-			compatible = "renesas,vin-r8a7792",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef3000 0 0x1000>;
-			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 808>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 808>;
-			status = "disabled";
-		};
-
-		vin4: video@e6ef4000 {
-			compatible = "renesas,vin-r8a7792",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef4000 0 0x1000>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 805>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 805>;
-			status = "disabled";
-		};
-
-		vin5: video@e6ef5000 {
-			compatible = "renesas,vin-r8a7792",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef5000 0 0x1000>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 804>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 804>;
-			status = "disabled";
-		};
-
-		sdhi0: mmc@ee100000 {
-			compatible = "renesas,sdhi-r8a7792",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee100000 0 0x328>;
-			interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
-			       <&dmac1 0xcd>, <&dmac1 0xce>;
-			dma-names = "tx", "rx", "tx", "rx";
-			clocks = <&cpg CPG_MOD 314>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 314>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@f1001000 {
-			compatible = "arm,gic-400";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0 0xf1001000 0 0x1000>,
-			      <0 0xf1002000 0 0x2000>,
-			      <0 0xf1004000 0 0x2000>,
-			      <0 0xf1006000 0 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
-				      IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&cpg CPG_MOD 408>;
-			clock-names = "clk";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 408>;
-		};
-
-		vsp@fe928000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe928000 0 0x8000>;
-			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 131>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 131>;
-		};
-
-		vsp@fe930000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe930000 0 0x8000>;
-			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 128>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 128>;
-		};
-
-		vsp@fe938000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe938000 0 0x8000>;
-			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 127>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 127>;
-		};
-
-		jpu: jpeg-codec@fe980000 {
-			compatible = "renesas,jpu-r8a7792",
-				     "renesas,rcar-gen2-jpu";
-			reg = <0 0xfe980000 0 0x10300>;
-			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 106>;
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 106>;
-		};
-
-		du: display@feb00000 {
-			compatible = "renesas,du-r8a7792";
-			reg = <0 0xfeb00000 0 0x40000>;
-			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
-			clock-names = "du.0", "du.1";
-			resets = <&cpg 724>;
-			reset-names = "du.0";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					du_out_rgb0: endpoint {
-					};
-				};
-				port@1 {
-					reg = <1>;
-					du_out_rgb1: endpoint {
-					};
-				};
-			};
-		};
-
-		prr: chipid@ff000044 {
-			compatible = "renesas,prr";
-			reg = <0 0xff000044 0 4>;
-		};
-
-		cmt0: timer@ffca0000 {
-			compatible = "renesas,r8a7792-cmt0",
-				     "renesas,rcar-gen2-cmt0";
-			reg = <0 0xffca0000 0 0x1004>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 124>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 124>;
-
-			status = "disabled";
-		};
-
-		cmt1: timer@e6130000 {
-			compatible = "renesas,r8a7792-cmt1",
-				     "renesas,rcar-gen2-cmt1";
-			reg = <0 0xe6130000 0 0x1004>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 329>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
-			resets = <&cpg 329>;
-
-			status = "disabled";
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
deleted file mode 100644
index 79b537b246426..0000000000000
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ /dev/null
@@ -1,818 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Gose board
- *
- * Copyright (C) 2014-2015 Renesas Electronics Corporation
- */
-
-/*
- * SSI-AK4643
- *
- * SW1: 1: AK4643
- *      2: CN22
- *      3: ADV7511
- *
- * This command is required when Playback/Capture
- *
- *	amixer set "LINEOUT Mixer DACL" on
- *	amixer set "DVC Out" 100%
- *	amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- *	amixer set "DVC Out Mute" on
- *	amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
- *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- *	amixer set "DVC Out Ramp" on
- *	aplay xxx.wav &
- *	amixer set "DVC Out"  80%  // Volume Down
- *	amixer set "DVC Out" 100%  // Volume Up
- */
-
-/dts-v1/;
-#include "r8a7793.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Gose";
-	compatible = "renesas,gose", "renesas,r8a7793";
-
-	aliases {
-		serial0 = &scif0;
-		serial1 = &scif1;
-		i2c9 = &gpioi2c2;
-		i2c10 = &gpioi2c4;
-		i2c11 = &i2chdmi;
-		i2c12 = &i2cexio4;
-		mmc0 = &sdhi0;
-		mmc1 = &sdhi1;
-		mmc2 = &sdhi2;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keyboard_pins>;
-		pinctrl-names = "default";
-
-		key-1 {
-			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_1>;
-			label = "SW2-1";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-2 {
-			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_2>;
-			label = "SW2-2";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-3 {
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_3>;
-			label = "SW2-3";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-4 {
-			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_4>;
-			label = "SW2-4";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-a {
-			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_A>;
-			label = "SW30";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_B>;
-			label = "SW31";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_C>;
-			label = "SW32";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-d {
-			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_D>;
-			label = "SW33";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-e {
-			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_E>;
-			label = "SW34";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-f {
-			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_F>;
-			label = "SW35";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-g {
-			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_G>;
-			label = "SW36";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-			label = "LED6";
-		};
-		led7 {
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-			label = "LED7";
-		};
-		led8 {
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-			label = "LED8";
-		};
-	};
-
-	vcc_sdhi0: regulator-vcc-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vcc_sdhi1: regulator-vcc-sdhi1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI1 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi1: regulator-vccq-sdhi1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vcc_sdhi2: regulator-vcc-sdhi2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi2: regulator-vccq-sdhi2 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	audio_clock: audio_clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <11289600>;
-	};
-
-	rsnd_ak4643: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&ak4643>;
-			clocks = <&audio_clock>;
-		};
-	};
-
-	hdmi-in {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&adv7612_in>;
-			};
-		};
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_out: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-
-	composite-in {
-		compatible = "composite-video-connector";
-
-		port {
-			composite_con_in: endpoint {
-				remote-endpoint = <&adv7180_in>;
-			};
-		};
-	};
-
-	x2_clk: x2-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <74250000>;
-	};
-
-	x13_clk: x13-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <148500000>;
-	};
-
-	gpioi2c2: i2c-9 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	gpioi2c4: i2c-10 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	/*
-	 * A fallback to GPIO is provided for I2C2.
-	 */
-	i2chdmi: i2c-11 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&i2c2>, <&gpioi2c2>;
-		i2c-bus-name = "i2c-hdmi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ak4643: codec@12 {
-			compatible = "asahi-kasei,ak4643";
-			#sound-dai-cells = <0>;
-			reg = <0x12>;
-		};
-
-		composite-in@20 {
-			compatible = "adi,adv7180cp";
-			reg = <0x20>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7180_in: endpoint {
-						remote-endpoint = <&composite_con_in>;
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-					adv7180_out: endpoint {
-						bus-width = <8>;
-						remote-endpoint = <&vin1ep>;
-					};
-				};
-			};
-		};
-
-		hdmi@39 {
-			compatible = "adi,adv7511w";
-			reg = <0x39>;
-			interrupt-parent = <&gpio3>;
-			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
-
-			adi,input-depth = <8>;
-			adi,input-colorspace = "rgb";
-			adi,input-clock = "1x";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7511_in: endpoint {
-						remote-endpoint = <&du_out_rgb>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					adv7511_out: endpoint {
-						remote-endpoint = <&hdmi_con_out>;
-					};
-				};
-			};
-		};
-
-		hdmi-in@4c {
-			compatible = "adi,adv7612";
-			reg = <0x4c>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-			default-input = <0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7612_in: endpoint {
-						remote-endpoint = <&hdmi_con_in>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					adv7612_out: endpoint {
-						remote-endpoint = <&vin0ep2>;
-					};
-				};
-			};
-		};
-
-		eeprom@50 {
-			compatible = "renesas,r1ex24002", "atmel,24c02";
-			reg = <0x50>;
-			pagesize = <16>;
-		};
-	};
-
-	/*
-	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
-	 * A fallback to GPIO is provided.
-	 */
-	i2cexio4: i2c-12 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&i2c4>, <&gpioi2c4>;
-		i2c-bus-name = "i2c-exio4";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
-
-&du {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
-		 <&x13_clk>, <&x2_clk>;
-	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7511_in>;
-			};
-		};
-	};
-};
-
-&lvds0 {
-	ports {
-		port@1 {
-			lvds_connector: endpoint {
-			};
-		};
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	i2c2_pins: i2c2 {
-		groups = "i2c2";
-		function = "i2c2";
-	};
-
-	i2c4_pins: i2c4 {
-		groups = "i2c4_c";
-		function = "i2c4";
-	};
-
-	du_pins: du {
-		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
-		function = "du";
-	};
-
-	scif0_pins: scif0 {
-		groups = "scif0_data_d";
-		function = "scif0";
-	};
-
-	scif1_pins: scif1 {
-		groups = "scif1_data_d";
-		function = "scif1";
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk";
-		function = "scif_clk";
-	};
-
-	ether_pins: ether {
-		groups = "eth_link", "eth_mdio", "eth_rmii";
-		function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		groups = "intc_irq0";
-		function = "intc";
-	};
-
-	pmic_irq_pins: pmicirq {
-		groups = "intc_irq2";
-		function = "intc";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <3300>;
-	};
-
-	sdhi0_pins_uhs: sd0_uhs {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <1800>;
-	};
-
-	sdhi1_pins: sd1 {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <3300>;
-	};
-
-	sdhi1_pins_uhs: sd1_uhs {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <1800>;
-	};
-
-	sdhi2_pins: sd2 {
-		groups = "sdhi2_data4", "sdhi2_ctrl";
-		function = "sdhi2";
-		power-source = <3300>;
-	};
-
-	sdhi2_pins_uhs: sd2_uhs {
-		groups = "sdhi2_data4", "sdhi2_ctrl";
-		function = "sdhi2";
-		power-source = <1800>;
-	};
-
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data4";
-		function = "qspi";
-	};
-
-	sound_pins: sound {
-		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
-		function = "ssi";
-	};
-
-	sound_clk_pins: sound_clk {
-		groups = "audio_clk_a";
-		function = "audio_clk";
-	};
-
-	keyboard_pins: keyboard {
-		pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
-		bias-pull-up;
-	};
-
-	vin0_pins: vin0 {
-		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
-		function = "vin0";
-	};
-
-	vin1_pins: vin1 {
-		groups = "vin1_data8", "vin1_clk";
-		function = "vin1";
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0022.1537",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&cmt0 {
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif1 {
-	pinctrl-0 = <&scif1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-1 = <&sdhi0_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-1 = <&sdhi1_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi1>;
-	vqmmc-supply = <&vccq_sdhi1>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-	sd-uhs-sdr50;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-1 = <&sdhi2_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
-	sd-uhs-sdr50;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		spi-cpol;
-		spi-cpha;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "i2c-hdmi";
-
-	status = "okay";
-	clock-frequency = <100000>;
-
-};
-
-&i2c6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pmic_irq_pins>;
-	status = "okay";
-	clock-frequency = <100000>;
-
-	pmic@58 {
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		watchdog {
-			compatible = "dlg,da9063-watchdog";
-		};
-	};
-
-	vdd_dvfs: regulator@68 {
-		compatible = "dlg,da9210";
-		reg = <0x68>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&i2c4 {
-	pinctrl-0 = <&i2c4_pins>;
-	pinctrl-names = "i2c-exio4";
-};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-	status = "okay";
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0>, <&src2>, <&dvc0>;
-			capture  = <&ssi1>, <&src3>, <&dvc1>;
-		};
-	};
-};
-
-&ssi1 {
-	shared-pin;
-};
-
-/* HDMI video input */
-&vin0 {
-	status = "okay";
-	pinctrl-0 = <&vin0_pins>;
-	pinctrl-names = "default";
-
-	port {
-		vin0ep2: endpoint {
-			remote-endpoint = <&adv7612_out>;
-			bus-width = <24>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			pclk-sample = <1>;
-			data-active = <1>;
-		};
-	};
-};
-
-/* composite video input */
-&vin1 {
-	pinctrl-0 = <&vin1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	port {
-		vin1ep: endpoint {
-			remote-endpoint = <&adv7180_out>;
-			bus-width = <8>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
deleted file mode 100644
index f51bf687f4bd5..0000000000000
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ /dev/null
@@ -1,1470 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Car M2-N (R8A77930) SoC
- *
- * Copyright (C) 2014-2015 Renesas Electronics Corporation
- */
-
-#include <dt-bindings/clock/r8a7793-cpg-mssr.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/power/r8a7793-sysc.h>
-
-/ {
-	compatible = "renesas,r8a7793";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		i2c8 = &i2c8;
-		spi0 = &qspi;
-	};
-
-	/*
-	 * The external audio clocks are configured as 0 Hz fixed frequency
-	 * clocks by default.
-	 * Boards that provide audio clocks should override them.
-	 */
-	audio_clk_a: audio_clk_a {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clk_b: audio_clk_b {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clk_c: audio_clk_c {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	/* External CAN clock */
-	can_clk: can {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1500000000>;
-			clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
-			power-domains = <&sysc R8A7793_PD_CA15_CPU0>;
-			enable-method = "renesas,apmu";
-			voltage-tolerance = <1>; /* 1% */
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1500000 1000000>,
-					   <1312500 1000000>,
-					   <1125000 1000000>,
-					   < 937500 1000000>,
-					   < 750000 1000000>,
-					   < 375000 1000000>;
-			next-level-cache = <&L2_CA15>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1500000000>;
-			clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
-			power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
-			enable-method = "renesas,apmu";
-			voltage-tolerance = <1>; /* 1% */
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1500000 1000000>,
-					   <1312500 1000000>,
-					   <1125000 1000000>,
-					   < 937500 1000000>,
-					   < 750000 1000000>,
-					   < 375000 1000000>;
-			next-level-cache = <&L2_CA15>;
-		};
-
-		L2_CA15: cache-controller-0 {
-			compatible = "cache";
-			power-domains = <&sysc R8A7793_PD_CA15_SCU>;
-			cache-unified;
-			cache-level = <2>;
-		};
-	};
-
-	/* External root clock */
-	extal_clk: extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	/* External SCIF clock */
-	scif_clk: scif {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		rwdt: watchdog@e6020000 {
-			compatible = "renesas,r8a7793-wdt",
-				     "renesas,rcar-gen2-wdt";
-			reg = <0 0xe6020000 0 0x0c>;
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 402>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 402>;
-			status = "disabled";
-		};
-
-		gpio0: gpio@e6050000 {
-			compatible = "renesas,gpio-r8a7793",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6050000 0 0x50>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 0 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 912>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 912>;
-		};
-
-		gpio1: gpio@e6051000 {
-			compatible = "renesas,gpio-r8a7793",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6051000 0 0x50>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 32 26>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 911>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 911>;
-		};
-
-		gpio2: gpio@e6052000 {
-			compatible = "renesas,gpio-r8a7793",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6052000 0 0x50>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 64 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 910>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 910>;
-		};
-
-		gpio3: gpio@e6053000 {
-			compatible = "renesas,gpio-r8a7793",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6053000 0 0x50>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 96 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 909>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 909>;
-		};
-
-		gpio4: gpio@e6054000 {
-			compatible = "renesas,gpio-r8a7793",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6054000 0 0x50>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 128 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 908>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 908>;
-		};
-
-		gpio5: gpio@e6055000 {
-			compatible = "renesas,gpio-r8a7793",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055000 0 0x50>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 160 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 907>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 907>;
-		};
-
-		gpio6: gpio@e6055400 {
-			compatible = "renesas,gpio-r8a7793",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055400 0 0x50>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 192 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 905>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 905>;
-		};
-
-		gpio7: gpio@e6055800 {
-			compatible = "renesas,gpio-r8a7793",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055800 0 0x50>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 224 26>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 904>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 904>;
-		};
-
-		pfc: pinctrl@e6060000 {
-			compatible = "renesas,pfc-r8a7793";
-			reg = <0 0xe6060000 0 0x250>;
-		};
-
-		/* Special CPG clocks */
-		cpg: clock-controller@e6150000 {
-			compatible = "renesas,r8a7793-cpg-mssr";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>, <&usb_extal_clk>;
-			clock-names = "extal", "usb_extal";
-			#clock-cells = <2>;
-			#power-domain-cells = <0>;
-			#reset-cells = <1>;
-		};
-
-		apmu@e6152000 {
-			compatible = "renesas,r8a7793-apmu", "renesas,apmu";
-			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0>, <&cpu1>;
-		};
-
-		rst: reset-controller@e6160000 {
-			compatible = "renesas,r8a7793-rst";
-			reg = <0 0xe6160000 0 0x0100>;
-		};
-
-		sysc: system-controller@e6180000 {
-			compatible = "renesas,r8a7793-sysc";
-			reg = <0 0xe6180000 0 0x0200>;
-			#power-domain-cells = <1>;
-		};
-
-		irqc0: interrupt-controller@e61c0000 {
-			compatible = "renesas,irqc-r8a7793", "renesas,irqc";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 407>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 407>;
-		};
-
-		thermal: thermal@e61f0000 {
-			compatible = "renesas,thermal-r8a7793",
-				     "renesas,rcar-gen2-thermal",
-				     "renesas,rcar-thermal";
-			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 522>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 522>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		ipmmu_sy0: iommu@e6280000 {
-			compatible = "renesas,ipmmu-r8a7793",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6280000 0 0x1000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_sy1: iommu@e6290000 {
-			compatible = "renesas,ipmmu-r8a7793",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6290000 0 0x1000>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_ds: iommu@e6740000 {
-			compatible = "renesas,ipmmu-r8a7793",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6740000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mp: iommu@ec680000 {
-			compatible = "renesas,ipmmu-r8a7793",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xec680000 0 0x1000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mx: iommu@fe951000 {
-			compatible = "renesas,ipmmu-r8a7793",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xfe951000 0 0x1000>;
-			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_rt: iommu@ffc80000 {
-			compatible = "renesas,ipmmu-r8a7793",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xffc80000 0 0x1000>;
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_gp: iommu@e62a0000 {
-			compatible = "renesas,ipmmu-r8a7793",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe62a0000 0 0x1000>;
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		icram0:	sram@e63a0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63a0000 0 0x12000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63a0000 0x12000>;
-		};
-
-		icram1:	sram@e63c0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63c0000 0 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63c0000 0x1000>;
-
-			smp-sram@0 {
-				compatible = "renesas,smp-sram";
-				reg = <0 0x100>;
-			};
-		};
-
-		/* The memory map in the User's Manual maps the cores to
-		 * bus numbers
-		 */
-		i2c0: i2c@e6508000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7793",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6508000 0 0x40>;
-			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 931>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 931>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@e6518000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7793",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6518000 0 0x40>;
-			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 930>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 930>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@e6530000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7793",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6530000 0 0x40>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 929>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 929>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@e6540000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7793",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6540000 0 0x40>;
-			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 928>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 928>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c4: i2c@e6520000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7793",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6520000 0 0x40>;
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 927>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 927>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c5: i2c@e6528000 {
-			/* doesn't need pinmux */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7793",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6528000 0 0x40>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 925>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 925>;
-			i2c-scl-internal-delay-ns = <110>;
-			status = "disabled";
-		};
-
-		i2c6: i2c@e60b0000 {
-			/* doesn't need pinmux */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7793",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe60b0000 0 0x425>;
-			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 926>;
-			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
-			       <&dmac1 0x77>, <&dmac1 0x78>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 926>;
-			status = "disabled";
-		};
-
-		i2c7: i2c@e6500000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7793",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6500000 0 0x425>;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 318>;
-			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
-			       <&dmac1 0x61>, <&dmac1 0x62>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 318>;
-			status = "disabled";
-		};
-
-		i2c8: i2c@e6510000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7793",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6510000 0 0x425>;
-			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 323>;
-			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
-			       <&dmac1 0x65>, <&dmac1 0x66>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 323>;
-			status = "disabled";
-		};
-
-		dmac0: dma-controller@e6700000 {
-			compatible = "renesas,dmac-r8a7793",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 219>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 219>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		dmac1: dma-controller@e6720000 {
-			compatible = "renesas,dmac-r8a7793",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 218>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 218>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		qspi: spi@e6b10000 {
-			compatible = "renesas,qspi-r8a7793", "renesas,qspi";
-			reg = <0 0xe6b10000 0 0x2c>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 917>;
-			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
-			       <&dmac1 0x17>, <&dmac1 0x18>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 917>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		scifa0: serial@e6c40000 {
-			compatible = "renesas,scifa-r8a7793",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c40000 0 64>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 204>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
-			       <&dmac1 0x21>, <&dmac1 0x22>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 204>;
-			status = "disabled";
-		};
-
-		scifa1: serial@e6c50000 {
-			compatible = "renesas,scifa-r8a7793",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c50000 0 64>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 203>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
-			       <&dmac1 0x25>, <&dmac1 0x26>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 203>;
-			status = "disabled";
-		};
-
-		scifa2: serial@e6c60000 {
-			compatible = "renesas,scifa-r8a7793",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c60000 0 64>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 202>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
-			       <&dmac1 0x27>, <&dmac1 0x28>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 202>;
-			status = "disabled";
-		};
-
-		scifa3: serial@e6c70000 {
-			compatible = "renesas,scifa-r8a7793",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c70000 0 64>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1106>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
-			       <&dmac1 0x1b>, <&dmac1 0x1c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 1106>;
-			status = "disabled";
-		};
-
-		scifa4: serial@e6c78000 {
-			compatible = "renesas,scifa-r8a7793",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c78000 0 64>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1107>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
-			       <&dmac1 0x1f>, <&dmac1 0x20>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 1107>;
-			status = "disabled";
-		};
-
-		scifa5: serial@e6c80000 {
-			compatible = "renesas,scifa-r8a7793",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c80000 0 64>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1108>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
-			       <&dmac1 0x23>, <&dmac1 0x24>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 1108>;
-			status = "disabled";
-		};
-
-		scifb0: serial@e6c20000 {
-			compatible = "renesas,scifb-r8a7793",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c20000 0 0x100>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 206>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
-			       <&dmac1 0x3d>, <&dmac1 0x3e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 206>;
-			status = "disabled";
-		};
-
-		scifb1: serial@e6c30000 {
-			compatible = "renesas,scifb-r8a7793",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c30000 0 0x100>;
-			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 207>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
-			       <&dmac1 0x19>, <&dmac1 0x1a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 207>;
-			status = "disabled";
-		};
-
-		scifb2: serial@e6ce0000 {
-			compatible = "renesas,scifb-r8a7793",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6ce0000 0 0x100>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 216>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
-			       <&dmac1 0x1d>, <&dmac1 0x1e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 216>;
-			status = "disabled";
-		};
-
-		scif0: serial@e6e60000 {
-			compatible = "renesas,scif-r8a7793",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e60000 0 64>;
-			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
-			       <&dmac1 0x29>, <&dmac1 0x2a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 721>;
-			status = "disabled";
-		};
-
-		scif1: serial@e6e68000 {
-			compatible = "renesas,scif-r8a7793",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e68000 0 64>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
-			       <&dmac1 0x2d>, <&dmac1 0x2e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 720>;
-			status = "disabled";
-		};
-
-		scif2: serial@e6e58000 {
-			compatible = "renesas,scif-r8a7793",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e58000 0 64>;
-			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
-			       <&dmac1 0x2b>, <&dmac1 0x2c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 719>;
-			status = "disabled";
-		};
-
-		scif3: serial@e6ea8000 {
-			compatible = "renesas,scif-r8a7793",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ea8000 0 64>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
-			       <&dmac1 0x2f>, <&dmac1 0x30>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 718>;
-			status = "disabled";
-		};
-
-		scif4: serial@e6ee0000 {
-			compatible = "renesas,scif-r8a7793",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee0000 0 64>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
-			       <&dmac1 0xfb>, <&dmac1 0xfc>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 715>;
-			status = "disabled";
-		};
-
-		scif5: serial@e6ee8000 {
-			compatible = "renesas,scif-r8a7793",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee8000 0 64>;
-			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
-			       <&dmac1 0xfd>, <&dmac1 0xfe>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 714>;
-			status = "disabled";
-		};
-
-		hscif0: serial@e62c0000 {
-			compatible = "renesas,hscif-r8a7793",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c0000 0 96>;
-			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
-			       <&dmac1 0x39>, <&dmac1 0x3a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 717>;
-			status = "disabled";
-		};
-
-		hscif1: serial@e62c8000 {
-			compatible = "renesas,hscif-r8a7793",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c8000 0 96>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
-			       <&dmac1 0x4d>, <&dmac1 0x4e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 716>;
-			status = "disabled";
-		};
-
-		hscif2: serial@e62d0000 {
-			compatible = "renesas,hscif-r8a7793",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62d0000 0 96>;
-			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
-			       <&dmac1 0x3b>, <&dmac1 0x3c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 713>;
-			status = "disabled";
-		};
-
-		can0: can@e6e80000 {
-			compatible = "renesas,can-r8a7793",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e80000 0 0x1000>;
-			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7793_CLK_RCAN>,
-				 <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 916>;
-			status = "disabled";
-		};
-
-		can1: can@e6e88000 {
-			compatible = "renesas,can-r8a7793",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e88000 0 0x1000>;
-			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7793_CLK_RCAN>,
-				 <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 915>;
-			status = "disabled";
-		};
-
-		vin0: video@e6ef0000 {
-			compatible = "renesas,vin-r8a7793",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef0000 0 0x1000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 811>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 811>;
-			status = "disabled";
-		};
-
-		vin1: video@e6ef1000 {
-			compatible = "renesas,vin-r8a7793",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef1000 0 0x1000>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 810>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 810>;
-			status = "disabled";
-		};
-
-		vin2: video@e6ef2000 {
-			compatible = "renesas,vin-r8a7793",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef2000 0 0x1000>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 809>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 809>;
-			status = "disabled";
-		};
-
-		rcar_sound: sound@ec500000 {
-			/*
-			 * #sound-dai-cells is required if simple-card
-			 *
-			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
-			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
-			 */
-			compatible = "renesas,rcar_sound-r8a7793",
-				     "renesas,rcar_sound-gen2";
-			reg = <0 0xec500000 0 0x1000>, /* SCU */
-			      <0 0xec5a0000 0 0x100>,  /* ADG */
-			      <0 0xec540000 0 0x1000>, /* SSIU */
-			      <0 0xec541000 0 0x280>,  /* SSI */
-			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
-			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
-			clocks = <&cpg CPG_MOD 1005>,
-				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
-				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
-				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
-				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
-				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
-				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
-				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
-				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
-				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
-				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
-				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
-				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A7793_CLK_M2>;
-			clock-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
-				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
-				      "ssi.1", "ssi.0",
-				      "src.9", "src.8", "src.7", "src.6",
-				      "src.5", "src.4", "src.3", "src.2",
-				      "src.1", "src.0",
-				      "dvc.0", "dvc.1",
-				      "clk_a", "clk_b", "clk_c", "clk_i";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 1005>,
-				 <&cpg 1006>, <&cpg 1007>,
-				 <&cpg 1008>, <&cpg 1009>,
-				 <&cpg 1010>, <&cpg 1011>,
-				 <&cpg 1012>, <&cpg 1013>,
-				 <&cpg 1014>, <&cpg 1015>;
-			reset-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
-				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
-				      "ssi.1", "ssi.0";
-
-			status = "disabled";
-
-			rcar_sound,dvc {
-				dvc0: dvc-0 {
-					dmas = <&audma1 0xbc>;
-					dma-names = "tx";
-				};
-				dvc1: dvc-1 {
-					dmas = <&audma1 0xbe>;
-					dma-names = "tx";
-				};
-			};
-
-			rcar_sound,src {
-				src0: src-0 {
-					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x85>, <&audma1 0x9a>;
-					dma-names = "rx", "tx";
-				};
-				src1: src-1 {
-					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x87>, <&audma1 0x9c>;
-					dma-names = "rx", "tx";
-				};
-				src2: src-2 {
-					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x89>, <&audma1 0x9e>;
-					dma-names = "rx", "tx";
-				};
-				src3: src-3 {
-					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
-					dma-names = "rx", "tx";
-				};
-				src4: src-4 {
-					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
-					dma-names = "rx", "tx";
-				};
-				src5: src-5 {
-					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
-					dma-names = "rx", "tx";
-				};
-				src6: src-6 {
-					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x91>, <&audma1 0xb4>;
-					dma-names = "rx", "tx";
-				};
-				src7: src-7 {
-					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x93>, <&audma1 0xb6>;
-					dma-names = "rx", "tx";
-				};
-				src8: src-8 {
-					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x95>, <&audma1 0xb8>;
-					dma-names = "rx", "tx";
-				};
-				src9: src-9 {
-					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x97>, <&audma1 0xba>;
-					dma-names = "rx", "tx";
-				};
-			};
-
-			rcar_sound,ssi {
-				ssi0: ssi-0 {
-					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x01>, <&audma1 0x02>,
-					       <&audma0 0x15>, <&audma1 0x16>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi1: ssi-1 {
-					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x03>, <&audma1 0x04>,
-					       <&audma0 0x49>, <&audma1 0x4a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi2: ssi-2 {
-					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x05>, <&audma1 0x06>,
-					       <&audma0 0x63>, <&audma1 0x64>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi3: ssi-3 {
-					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x07>, <&audma1 0x08>,
-					       <&audma0 0x6f>, <&audma1 0x70>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi4: ssi-4 {
-					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x09>, <&audma1 0x0a>,
-					       <&audma0 0x71>, <&audma1 0x72>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi5: ssi-5 {
-					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0b>, <&audma1 0x0c>,
-					       <&audma0 0x73>, <&audma1 0x74>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi6: ssi-6 {
-					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0d>, <&audma1 0x0e>,
-					       <&audma0 0x75>, <&audma1 0x76>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi7: ssi-7 {
-					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0f>, <&audma1 0x10>,
-					       <&audma0 0x79>, <&audma1 0x7a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi8: ssi-8 {
-					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x11>, <&audma1 0x12>,
-					       <&audma0 0x7b>, <&audma1 0x7c>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi9: ssi-9 {
-					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x13>, <&audma1 0x14>,
-					       <&audma0 0x7d>, <&audma1 0x7e>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-			};
-		};
-
-		audma0: dma-controller@ec700000 {
-			compatible = "renesas,dmac-r8a7793",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 502>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 502>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		audma1: dma-controller@ec720000 {
-			compatible = "renesas,dmac-r8a7793",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 501>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 501>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		sdhi0: mmc@ee100000 {
-			compatible = "renesas,sdhi-r8a7793",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee100000 0 0x328>;
-			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
-			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
-			       <&dmac1 0xcd>, <&dmac1 0xce>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <195000000>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 314>;
-			status = "disabled";
-		};
-
-		sdhi1: mmc@ee140000 {
-			compatible = "renesas,sdhi-r8a7793",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee140000 0 0x100>;
-			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
-			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
-			       <&dmac1 0xc1>, <&dmac1 0xc2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 312>;
-			status = "disabled";
-		};
-
-		sdhi2: mmc@ee160000 {
-			compatible = "renesas,sdhi-r8a7793",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee160000 0 0x100>;
-			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
-			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
-			       <&dmac1 0xd3>, <&dmac1 0xd4>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 311>;
-			status = "disabled";
-		};
-
-		mmcif0: mmc@ee200000 {
-			compatible = "renesas,mmcif-r8a7793",
-				     "renesas,sh-mmcif";
-			reg = <0 0xee200000 0 0x80>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 315>;
-			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
-			       <&dmac1 0xd1>, <&dmac1 0xd2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 315>;
-			reg-io-width = <4>;
-			status = "disabled";
-			max-frequency = <97500000>;
-		};
-
-		ether: ethernet@ee700000 {
-			compatible = "renesas,ether-r8a7793",
-				     "renesas,rcar-gen2-ether";
-			reg = <0 0xee700000 0 0x400>;
-			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 813>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 813>;
-			phy-mode = "rmii";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@f1001000 {
-			compatible = "arm,gic-400";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0 0xf1001000 0 0x1000>,
-				<0 0xf1002000 0 0x2000>,
-				<0 0xf1004000 0 0x2000>,
-				<0 0xf1006000 0 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&cpg CPG_MOD 408>;
-			clock-names = "clk";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 408>;
-		};
-
-		fdp1@fe940000 {
-			compatible = "renesas,fdp1";
-			reg = <0 0xfe940000 0 0x2400>;
-			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 119>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 119>;
-		};
-
-		fdp1@fe944000 {
-			compatible = "renesas,fdp1";
-			reg = <0 0xfe944000 0 0x2400>;
-			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 118>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 118>;
-		};
-
-		du: display@feb00000 {
-			compatible = "renesas,du-r8a7793";
-			reg = <0 0xfeb00000 0 0x40000>;
-			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
-			clock-names = "du.0", "du.1";
-			resets = <&cpg 724>;
-			reset-names = "du.0";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					du_out_rgb: endpoint {
-					};
-				};
-				port@1 {
-					reg = <1>;
-					du_out_lvds0: endpoint {
-						remote-endpoint = <&lvds0_in>;
-					};
-				};
-			};
-		};
-
-		lvds0: lvds@feb90000 {
-			compatible = "renesas,r8a7793-lvds";
-			reg = <0 0xfeb90000 0 0x1c>;
-			clocks = <&cpg CPG_MOD 726>;
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 726>;
-
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					lvds0_in: endpoint {
-						remote-endpoint = <&du_out_lvds0>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					lvds0_out: endpoint {
-					};
-				};
-			};
-		};
-
-		prr: chipid@ff000044 {
-			compatible = "renesas,prr";
-			reg = <0 0xff000044 0 4>;
-		};
-
-		cmt0: timer@ffca0000 {
-			compatible = "renesas,r8a7793-cmt0",
-				     "renesas,rcar-gen2-cmt0";
-			reg = <0 0xffca0000 0 0x1004>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 124>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 124>;
-
-			status = "disabled";
-		};
-
-		cmt1: timer@e6130000 {
-			compatible = "renesas,r8a7793-cmt1",
-				     "renesas,rcar-gen2-cmt1";
-			reg = <0 0xe6130000 0 0x1004>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 329>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
-			resets = <&cpg 329>;
-
-			status = "disabled";
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	/* External USB clock - can be overridden by the board */
-	usb_extal_clk: usb_extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <48000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
deleted file mode 100644
index 4d93319674c6e..0000000000000
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ /dev/null
@@ -1,533 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Alt board
- *
- * Copyright (C) 2014 Renesas Electronics Corporation
- */
-
-/dts-v1/;
-#include "r8a7794.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Alt";
-	compatible = "renesas,alt", "renesas,r8a7794";
-
-	aliases {
-		serial0 = &scif2;
-		i2c9 = &gpioi2c1;
-		i2c10 = &gpioi2c4;
-		i2c11 = &i2chdmi;
-		i2c12 = &i2cexio4;
-		mmc0 = &mmcif0;
-		mmc1 = &sdhi0;
-		mmc2 = &sdhi1;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	d3_3v: regulator-d3-3v {
-		compatible = "regulator-fixed";
-		regulator-name = "D3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_sdhi0: regulator-vcc-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vcc_sdhi1: regulator-vcc-sdhi1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI1 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi1: regulator-vccq-sdhi1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keyboard_pins>;
-		pinctrl-names = "default";
-
-		one {
-			linux,code = <KEY_1>;
-			label = "SW2-1";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
-		};
-		two {
-			linux,code = <KEY_2>;
-			label = "SW2-2";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
-		};
-		three {
-			linux,code = <KEY_3>;
-			label = "SW2-3";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
-		};
-		four {
-			linux,code = <KEY_4>;
-			label = "SW2-4";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	vga-encoder {
-		compatible = "adi,adv7123";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7123_in: endpoint {
-					remote-endpoint = <&du_out_rgb1>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				adv7123_out: endpoint {
-					remote-endpoint = <&vga_in>;
-				};
-			};
-		};
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_in: endpoint {
-				remote-endpoint = <&adv7123_out>;
-			};
-		};
-	};
-
-	x2_clk: x2-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <74250000>;
-	};
-
-	x13_clk: x13-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <148500000>;
-	};
-
-	gpioi2c1: i2c-9 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	};
-
-	gpioi2c4: i2c-10 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	/*
-	 * A fallback to GPIO is provided for I2C1.
-	 */
-	i2chdmi: i2c-11 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&i2c1>, <&gpioi2c1>;
-		i2c-bus-name = "i2c-hdmi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		composite-in@20 {
-			compatible = "adi,adv7180";
-			reg = <0x20>;
-
-			port {
-				adv7180: endpoint {
-					bus-width = <8>;
-					remote-endpoint = <&vin0ep>;
-				};
-			};
-		};
-
-		eeprom@50 {
-			compatible = "renesas,r1ex24002", "atmel,24c02";
-			reg = <0x50>;
-			pagesize = <16>;
-		};
-	};
-
-	/*
-	 * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
-	 * A fallback to GPIO is provided.
-	 */
-	i2cexio4: i2c-14 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&i2c4>, <&gpioi2c4>;
-		i2c-bus-name = "i2c-exio4";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&du {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
-		 <&x13_clk>, <&x2_clk>;
-	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
-
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&adv7123_in>;
-			};
-		};
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	du_pins: du {
-		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
-		function = "du1";
-	};
-
-	scif2_pins: scif2 {
-		groups = "scif2_data";
-		function = "scif2";
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk";
-		function = "scif_clk";
-	};
-
-	ether_pins: ether {
-		groups = "eth_link", "eth_mdio", "eth_rmii";
-		function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		groups = "intc_irq8";
-		function = "intc";
-	};
-
-	i2c1_pins: i2c1 {
-		groups = "i2c1";
-		function = "i2c1";
-	};
-
-	i2c4_pins: i2c4 {
-		groups = "i2c4";
-		function = "i2c4";
-	};
-
-	vin0_pins: vin0 {
-		groups = "vin0_data8", "vin0_clk";
-		function = "vin0";
-	};
-
-	mmcif0_pins: mmcif0 {
-		groups = "mmc_data8", "mmc_ctrl";
-		function = "mmc";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <3300>;
-	};
-
-	sdhi0_pins_uhs: sd0_uhs {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <1800>;
-	};
-
-	sdhi1_pins: sd1 {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <3300>;
-	};
-
-	sdhi1_pins_uhs: sd1_uhs {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <1800>;
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
-	};
-
-	keyboard_pins: keyboard {
-		pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
-		bias-pull-up;
-	};
-};
-
-&cmt0 {
-	status = "okay";
-};
-
-&pfc {
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data4";
-		function = "qspi";
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0022.1537",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&mmcif0 {
-	pinctrl-0 = <&mmcif0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&d3_3v>;
-	vqmmc-supply = <&d3_3v>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-1 = <&sdhi0_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-1 = <&sdhi1_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi1>;
-	vqmmc-supply = <&vccq_sdhi1>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-	sd-uhs-sdr50;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "i2c-hdmi";
-
-	clock-frequency = <400000>;
-};
-
-&i2c4 {
-	pinctrl-0 = <&i2c4_pins>;
-	pinctrl-names = "i2c-exio4";
-};
-
-&i2c7 {
-	status = "okay";
-	clock-frequency = <100000>;
-
-	pmic@58 {
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		watchdog {
-			compatible = "dlg,da9063-watchdog";
-		};
-	};
-};
-
-&vin0 {
-	status = "okay";
-	pinctrl-0 = <&vin0_pins>;
-	pinctrl-names = "default";
-
-	port {
-		vin0ep: endpoint {
-			remote-endpoint = <&adv7180>;
-			bus-width = <8>;
-		};
-	};
-};
-
-&scif2 {
-	pinctrl-0 = <&scif2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		spi-cpol;
-		spi-cpha;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "system";
-				reg = <0x00040000 0x00040000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "user";
-				reg = <0x00080000 0x03f80000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
deleted file mode 100644
index b7af1befa126b..0000000000000
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ /dev/null
@@ -1,578 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the SILK board
- *
- * Copyright (C) 2014 Renesas Electronics Corporation
- * Copyright (C) 2014-2015 Renesas Solutions Corp.
- * Copyright (C) 2014-2015 Cogent Embedded, Inc.
- */
-
-/*
- * SSI-AK4643
- *
- * SW1: 2-1: AK4643
- *      2-3: ADV7511
- *
- * This command is required before playback/capture:
- *
- *	amixer set "LINEOUT Mixer DACL" on
- */
-
-/dts-v1/;
-#include "r8a7794.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "SILK";
-	compatible = "renesas,silk", "renesas,r8a7794";
-
-	aliases {
-		serial0 = &scif2;
-		i2c9 = &gpioi2c1;
-		i2c10 = &i2chdmi;
-		mmc0 = &mmcif0;
-		mmc1 = &sdhi1;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keyboard_pins>;
-		pinctrl-names = "default";
-
-		key-3 {
-			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_3>;
-			label = "SW3";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-4 {
-			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_4>;
-			label = "SW4";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-6 {
-			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_6>;
-			label = "SW6";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-a {
-			gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_A>;
-			label = "SW12-1";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_B>;
-			label = "SW12-2";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_C>;
-			label = "SW12-3";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-d {
-			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_D>;
-			label = "SW12-4";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-	};
-
-	d3_3v: regulator-d3-3v {
-		compatible = "regulator-fixed";
-		regulator-name = "D3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_sdhi1: regulator-vcc-sdhi1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI1 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi1: regulator-vccq-sdhi1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vga-encoder {
-		compatible = "adi,adv7123";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7123_in: endpoint {
-					remote-endpoint = <&du_out_rgb1>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				adv7123_out: endpoint {
-					remote-endpoint = <&vga_in>;
-				};
-			};
-		};
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_in: endpoint {
-				remote-endpoint = <&adv7123_out>;
-			};
-		};
-	};
-
-	x2_clk: x2-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <148500000>;
-	};
-
-	x3_clk: x3-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <74250000>;
-	};
-
-	x9_clk: audio_clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12288000>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&soundcodec>;
-		simple-audio-card,frame-master = <&soundcodec>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		soundcodec: simple-audio-card,codec {
-			sound-dai = <&ak4643>;
-			clocks = <&x9_clk>;
-		};
-	};
-
-	gpioi2c1: i2c-9 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	/*
-	 * A fallback to GPIO is provided for I2C1.
-	 */
-	i2chdmi: i2c-10 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&i2c1>, <&gpioi2c1>;
-		i2c-bus-name = "i2c-hdmi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ak4643: codec@12 {
-			compatible = "asahi-kasei,ak4643";
-			#sound-dai-cells = <0>;
-			reg = <0x12>;
-		};
-
-		composite-in@20 {
-			compatible = "adi,adv7180";
-			reg = <0x20>;
-
-			port {
-				adv7180: endpoint {
-					bus-width = <8>;
-					remote-endpoint = <&vin0ep>;
-				};
-			};
-		};
-
-		hdmi@39 {
-			compatible = "adi,adv7511w";
-			reg = <0x39>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
-
-			adi,input-depth = <8>;
-			adi,input-colorspace = "rgb";
-			adi,input-clock = "1x";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7511_in: endpoint {
-						remote-endpoint = <&du_out_rgb0>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					adv7511_out: endpoint {
-						remote-endpoint = <&hdmi_con>;
-					};
-				};
-			};
-		};
-
-		eeprom@50 {
-			compatible = "renesas,r1ex24002", "atmel,24c02";
-			reg = <0x50>;
-			pagesize = <16>;
-		};
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	scif2_pins: scif2 {
-		groups = "scif2_data";
-		function = "scif2";
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk";
-		function = "scif_clk";
-	};
-
-	ether_pins: ether {
-		groups = "eth_link", "eth_mdio", "eth_rmii";
-		function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		groups = "intc_irq8";
-		function = "intc";
-	};
-
-	i2c1_pins: i2c1 {
-		groups = "i2c1";
-		function = "i2c1";
-	};
-
-	mmcif0_pins: mmcif0 {
-		groups = "mmc_data8", "mmc_ctrl";
-		function = "mmc";
-	};
-
-	sdhi1_pins: sd1 {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-	};
-
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data4";
-		function = "qspi";
-	};
-
-	vin0_pins: vin0 {
-		groups = "vin0_data8", "vin0_clk";
-		function = "vin0";
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
-	};
-
-	du0_pins: du0 {
-		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
-		function = "du0";
-	};
-
-	du1_pins: du1 {
-		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
-		function = "du1";
-	};
-
-	keyboard_pins: keyboard {
-		pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
-		bias-pull-up;
-	};
-
-	ssi_pins: sound {
-		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
-		function = "ssi";
-	};
-
-	audio_clk_pins: audio_clk {
-		groups = "audio_clkc";
-		function = "audio_clk";
-	};
-};
-
-&scif2 {
-	pinctrl-0 = <&scif2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0022.1537",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2c1 {
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "i2c-hdmi";
-
-	clock-frequency = <400000>;
-};
-
-&i2c7 {
-	status = "okay";
-	clock-frequency = <100000>;
-
-	pmic@58 {
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		onkey {
-			compatible = "dlg,da9063-onkey";
-		};
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		watchdog {
-			compatible = "dlg,da9063-watchdog";
-		};
-	};
-};
-
-&mmcif0 {
-	pinctrl-0 = <&mmcif0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&d3_3v>;
-	vqmmc-supply = <&d3_3v>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi1>;
-	vqmmc-supply = <&vccq_sdhi1>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		spi-cpol;
-		spi-cpha;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
-	};
-};
-
-/* composite video input */
-&vin0 {
-	status = "okay";
-	pinctrl-0 = <&vin0_pins>;
-	pinctrl-names = "default";
-
-	port {
-		vin0ep: endpoint {
-			remote-endpoint = <&adv7180>;
-			bus-width = <8>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&du {
-	pinctrl-0 = <&du0_pins>, <&du1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
-		 <&x2_clk>, <&x3_clk>;
-	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7511_in>;
-			};
-		};
-		port@1 {
-			endpoint {
-				remote-endpoint = <&adv7123_in>;
-			};
-		};
-	};
-};
-
-&rcar_sound {
-	pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0>;
-			capture  = <&ssi1>;
-		};
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&ssi1 {
-	shared-pin;
-};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
deleted file mode 100644
index 371dd4715ddef..0000000000000
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ /dev/null
@@ -1,1437 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Car E2 (R8A77940) SoC
- *
- * Copyright (C) 2014 Renesas Electronics Corporation
- * Copyright (C) 2014 Ulrich Hecht
- */
-
-#include <dt-bindings/clock/r8a7794-cpg-mssr.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/power/r8a7794-sysc.h>
-
-/ {
-	compatible = "renesas,r8a7794";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		spi0 = &qspi;
-		vin0 = &vin0;
-		vin1 = &vin1;
-	};
-
-	/*
-	 * The external audio clocks are configured as 0 Hz fixed frequency
-	 * clocks by default.
-	 * Boards that provide audio clocks should override them.
-	 */
-	audio_clka: audio_clka {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clkb: audio_clkb {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clkc: audio_clkc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	/* External CAN clock */
-	can_clk: can {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-			clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
-			power-domains = <&sysc R8A7794_PD_CA7_CPU0>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA7>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-			clock-frequency = <1000000000>;
-			clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
-			power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
-			enable-method = "renesas,apmu";
-			next-level-cache = <&L2_CA7>;
-		};
-
-		L2_CA7: cache-controller-0 {
-			compatible = "cache";
-			power-domains = <&sysc R8A7794_PD_CA7_SCU>;
-			cache-unified;
-			cache-level = <2>;
-		};
-	};
-
-	/* External root clock */
-	extal_clk: extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	/* External SCIF clock */
-	scif_clk: scif {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		rwdt: watchdog@e6020000 {
-			compatible = "renesas,r8a7794-wdt",
-				     "renesas,rcar-gen2-wdt";
-			reg = <0 0xe6020000 0 0x0c>;
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 402>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 402>;
-			status = "disabled";
-		};
-
-		gpio0: gpio@e6050000 {
-			compatible = "renesas,gpio-r8a7794",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6050000 0 0x50>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 0 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 912>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 912>;
-		};
-
-		gpio1: gpio@e6051000 {
-			compatible = "renesas,gpio-r8a7794",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6051000 0 0x50>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 32 26>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 911>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 911>;
-		};
-
-		gpio2: gpio@e6052000 {
-			compatible = "renesas,gpio-r8a7794",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6052000 0 0x50>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 64 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 910>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 910>;
-		};
-
-		gpio3: gpio@e6053000 {
-			compatible = "renesas,gpio-r8a7794",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6053000 0 0x50>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 96 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 909>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 909>;
-		};
-
-		gpio4: gpio@e6054000 {
-			compatible = "renesas,gpio-r8a7794",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6054000 0 0x50>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 128 32>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 908>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 908>;
-		};
-
-		gpio5: gpio@e6055000 {
-			compatible = "renesas,gpio-r8a7794",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055000 0 0x50>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 160 28>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 907>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 907>;
-		};
-
-		gpio6: gpio@e6055400 {
-			compatible = "renesas,gpio-r8a7794",
-				     "renesas,rcar-gen2-gpio";
-			reg = <0 0xe6055400 0 0x50>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pfc 0 192 26>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			clocks = <&cpg CPG_MOD 905>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 905>;
-		};
-
-		pfc: pinctrl@e6060000 {
-			compatible = "renesas,pfc-r8a7794";
-			reg = <0 0xe6060000 0 0x11c>;
-		};
-
-		cpg: clock-controller@e6150000 {
-			compatible = "renesas,r8a7794-cpg-mssr";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>, <&usb_extal_clk>;
-			clock-names = "extal", "usb_extal";
-			#clock-cells = <2>;
-			#power-domain-cells = <0>;
-			#reset-cells = <1>;
-		};
-
-		apmu@e6151000 {
-			compatible = "renesas,r8a7794-apmu", "renesas,apmu";
-			reg = <0 0xe6151000 0 0x188>;
-			cpus = <&cpu0>, <&cpu1>;
-		};
-
-		rst: reset-controller@e6160000 {
-			compatible = "renesas,r8a7794-rst";
-			reg = <0 0xe6160000 0 0x0100>;
-		};
-
-		sysc: system-controller@e6180000 {
-			compatible = "renesas,r8a7794-sysc";
-			reg = <0 0xe6180000 0 0x0200>;
-			#power-domain-cells = <1>;
-		};
-
-		irqc0: interrupt-controller@e61c0000 {
-			compatible = "renesas,irqc-r8a7794", "renesas,irqc";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 407>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 407>;
-		};
-
-		ipmmu_sy0: iommu@e6280000 {
-			compatible = "renesas,ipmmu-r8a7794",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6280000 0 0x1000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_sy1: iommu@e6290000 {
-			compatible = "renesas,ipmmu-r8a7794",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6290000 0 0x1000>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_ds: iommu@e6740000 {
-			compatible = "renesas,ipmmu-r8a7794",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe6740000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mp: iommu@ec680000 {
-			compatible = "renesas,ipmmu-r8a7794",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xec680000 0 0x1000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_mx: iommu@fe951000 {
-			compatible = "renesas,ipmmu-r8a7794",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xfe951000 0 0x1000>;
-			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		ipmmu_gp: iommu@e62a0000 {
-			compatible = "renesas,ipmmu-r8a7794",
-				     "renesas,ipmmu-vmsa";
-			reg = <0 0xe62a0000 0 0x1000>;
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			status = "disabled";
-		};
-
-		icram0:	sram@e63a0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63a0000 0 0x12000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63a0000 0x12000>;
-		};
-
-		icram1:	sram@e63c0000 {
-			compatible = "mmio-sram";
-			reg = <0 0xe63c0000 0 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0xe63c0000 0x1000>;
-
-			smp-sram@0 {
-				compatible = "renesas,smp-sram";
-				reg = <0 0x100>;
-			};
-		};
-
-		/* The memory map in the User's Manual maps the cores to
-		 * bus numbers
-		 */
-		i2c0: i2c@e6508000 {
-			compatible = "renesas,i2c-r8a7794",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6508000 0 0x40>;
-			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 931>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 931>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@e6518000 {
-			compatible = "renesas,i2c-r8a7794",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6518000 0 0x40>;
-			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 930>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 930>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@e6530000 {
-			compatible = "renesas,i2c-r8a7794",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6530000 0 0x40>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 929>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 929>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@e6540000 {
-			compatible = "renesas,i2c-r8a7794",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6540000 0 0x40>;
-			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 928>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 928>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c4: i2c@e6520000 {
-			compatible = "renesas,i2c-r8a7794",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6520000 0 0x40>;
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 927>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 927>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c5: i2c@e6528000 {
-			compatible = "renesas,i2c-r8a7794",
-				     "renesas,rcar-gen2-i2c";
-			reg = <0 0xe6528000 0 0x40>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 925>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 925>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			i2c-scl-internal-delay-ns = <6>;
-			status = "disabled";
-		};
-
-		i2c6: i2c@e6500000 {
-			compatible = "renesas,iic-r8a7794",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6500000 0 0x425>;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 318>;
-			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
-			       <&dmac1 0x61>, <&dmac1 0x62>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 318>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c7: i2c@e6510000 {
-			compatible = "renesas,iic-r8a7794",
-				     "renesas,rcar-gen2-iic",
-				     "renesas,rmobile-iic";
-			reg = <0 0xe6510000 0 0x425>;
-			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 323>;
-			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
-			       <&dmac1 0x65>, <&dmac1 0x66>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 323>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		hsusb: usb@e6590000 {
-			compatible = "renesas,usbhs-r8a7794",
-				     "renesas,rcar-gen2-usbhs";
-			reg = <0 0xe6590000 0 0x100>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 704>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			renesas,buswait = <4>;
-			phys = <&usb0 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		usbphy: usb-phy-controller@e6590100 {
-			compatible = "renesas,usb-phy-r8a7794",
-				     "renesas,rcar-gen2-usb-phy";
-			reg = <0 0xe6590100 0 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cpg CPG_MOD 704>;
-			clock-names = "usbhs";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
-			status = "disabled";
-
-			usb0: usb-phy@0 {
-				reg = <0>;
-				#phy-cells = <1>;
-			};
-			usb2: usb-phy@2 {
-				reg = <2>;
-				#phy-cells = <1>;
-			};
-		};
-
-		dmac0: dma-controller@e6700000 {
-			compatible = "renesas,dmac-r8a7794",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 219>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 219>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		dmac1: dma-controller@e6720000 {
-			compatible = "renesas,dmac-r8a7794",
-				     "renesas,rcar-dmac";
-			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3",
-					  "ch4", "ch5", "ch6", "ch7",
-					  "ch8", "ch9", "ch10", "ch11",
-					  "ch12", "ch13", "ch14";
-			clocks = <&cpg CPG_MOD 218>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 218>;
-			#dma-cells = <1>;
-			dma-channels = <15>;
-		};
-
-		avb: ethernet@e6800000 {
-			compatible = "renesas,etheravb-r8a7794",
-				     "renesas,etheravb-rcar-gen2";
-			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
-			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 812>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 812>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		qspi: spi@e6b10000 {
-			compatible = "renesas,qspi-r8a7794", "renesas,qspi";
-			reg = <0 0xe6b10000 0 0x2c>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 917>;
-			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
-			       <&dmac1 0x17>, <&dmac1 0x18>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 917>;
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		scifa0: serial@e6c40000 {
-			compatible = "renesas,scifa-r8a7794",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c40000 0 64>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 204>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
-			       <&dmac1 0x21>, <&dmac1 0x22>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 204>;
-			status = "disabled";
-		};
-
-		scifa1: serial@e6c50000 {
-			compatible = "renesas,scifa-r8a7794",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c50000 0 64>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 203>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
-			       <&dmac1 0x25>, <&dmac1 0x26>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 203>;
-			status = "disabled";
-		};
-
-		scifa2: serial@e6c60000 {
-			compatible = "renesas,scifa-r8a7794",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c60000 0 64>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 202>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
-			       <&dmac1 0x27>, <&dmac1 0x28>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 202>;
-			status = "disabled";
-		};
-
-		scifa3: serial@e6c70000 {
-			compatible = "renesas,scifa-r8a7794",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c70000 0 64>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1106>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
-			       <&dmac1 0x1b>, <&dmac1 0x1c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 1106>;
-			status = "disabled";
-		};
-
-		scifa4: serial@e6c78000 {
-			compatible = "renesas,scifa-r8a7794",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c78000 0 64>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1107>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
-			       <&dmac1 0x1f>, <&dmac1 0x20>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 1107>;
-			status = "disabled";
-		};
-
-		scifa5: serial@e6c80000 {
-			compatible = "renesas,scifa-r8a7794",
-				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-			reg = <0 0xe6c80000 0 64>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 1108>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
-			       <&dmac1 0x23>, <&dmac1 0x24>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 1108>;
-			status = "disabled";
-		};
-
-		scifb0: serial@e6c20000 {
-			compatible = "renesas,scifb-r8a7794",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c20000 0 0x100>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 206>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
-			       <&dmac1 0x3d>, <&dmac1 0x3e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 206>;
-			status = "disabled";
-		};
-
-		scifb1: serial@e6c30000 {
-			compatible = "renesas,scifb-r8a7794",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6c30000 0 0x100>;
-			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 207>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
-			       <&dmac1 0x19>, <&dmac1 0x1a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 207>;
-			status = "disabled";
-		};
-
-		scifb2: serial@e6ce0000 {
-			compatible = "renesas,scifb-r8a7794",
-				     "renesas,rcar-gen2-scifb", "renesas,scifb";
-			reg = <0 0xe6ce0000 0 0x100>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 216>;
-			clock-names = "fck";
-			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
-			       <&dmac1 0x1d>, <&dmac1 0x1e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 216>;
-			status = "disabled";
-		};
-
-		scif0: serial@e6e60000 {
-			compatible = "renesas,scif-r8a7794",
-				     "renesas,rcar-gen2-scif",
-				     "renesas,scif";
-			reg = <0 0xe6e60000 0 64>;
-			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
-			       <&dmac1 0x29>, <&dmac1 0x2a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 721>;
-			status = "disabled";
-		};
-
-		scif1: serial@e6e68000 {
-			compatible = "renesas,scif-r8a7794",
-				     "renesas,rcar-gen2-scif",
-				     "renesas,scif";
-			reg = <0 0xe6e68000 0 64>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
-			       <&dmac1 0x2d>, <&dmac1 0x2e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 720>;
-			status = "disabled";
-		};
-
-		scif2: serial@e6e58000 {
-			compatible = "renesas,scif-r8a7794",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6e58000 0 64>;
-			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
-			       <&dmac1 0x2b>, <&dmac1 0x2c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 719>;
-			status = "disabled";
-		};
-
-		scif3: serial@e6ea8000 {
-			compatible = "renesas,scif-r8a7794",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ea8000 0 64>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
-			       <&dmac1 0x2f>, <&dmac1 0x30>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 718>;
-			status = "disabled";
-		};
-
-		scif4: serial@e6ee0000 {
-			compatible = "renesas,scif-r8a7794",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee0000 0 64>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
-			       <&dmac1 0xfb>, <&dmac1 0xfc>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 715>;
-			status = "disabled";
-		};
-
-		scif5: serial@e6ee8000 {
-			compatible = "renesas,scif-r8a7794",
-				     "renesas,rcar-gen2-scif", "renesas,scif";
-			reg = <0 0xe6ee8000 0 64>;
-			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
-			       <&dmac1 0xfd>, <&dmac1 0xfe>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 714>;
-			status = "disabled";
-		};
-
-		hscif0: serial@e62c0000 {
-			compatible = "renesas,hscif-r8a7794",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c0000 0 96>;
-			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 717>,
-				 <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
-			       <&dmac1 0x39>, <&dmac1 0x3a>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 717>;
-			status = "disabled";
-		};
-
-		hscif1: serial@e62c8000 {
-			compatible = "renesas,hscif-r8a7794",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62c8000 0 96>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 716>,
-				 <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
-			       <&dmac1 0x4d>, <&dmac1 0x4e>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 716>;
-			status = "disabled";
-		};
-
-		hscif2: serial@e62d0000 {
-			compatible = "renesas,hscif-r8a7794",
-				     "renesas,rcar-gen2-hscif", "renesas,hscif";
-			reg = <0 0xe62d0000 0 96>;
-			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
-				 <&scif_clk>;
-			clock-names = "fck", "brg_int", "scif_clk";
-			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
-			       <&dmac1 0x3b>, <&dmac1 0x3c>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 713>;
-			status = "disabled";
-		};
-
-		can0: can@e6e80000 {
-			compatible = "renesas,can-r8a7794",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e80000 0 0x1000>;
-			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7794_CLK_RCAN>,
-				 <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 916>;
-			status = "disabled";
-		};
-
-		can1: can@e6e88000 {
-			compatible = "renesas,can-r8a7794",
-				     "renesas,rcar-gen2-can";
-			reg = <0 0xe6e88000 0 0x1000>;
-			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7794_CLK_RCAN>,
-				 <&can_clk>;
-			clock-names = "clkp1", "clkp2", "can_clk";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 915>;
-			status = "disabled";
-		};
-
-		vin0: video@e6ef0000 {
-			compatible = "renesas,vin-r8a7794",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef0000 0 0x1000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 811>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 811>;
-			status = "disabled";
-		};
-
-		vin1: video@e6ef1000 {
-			compatible = "renesas,vin-r8a7794",
-				     "renesas,rcar-gen2-vin";
-			reg = <0 0xe6ef1000 0 0x1000>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 810>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 810>;
-			status = "disabled";
-		};
-
-		rcar_sound: sound@ec500000 {
-			/*
-			 * #sound-dai-cells is required if simple-card
-			 *
-			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
-			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
-			 */
-			compatible = "renesas,rcar_sound-r8a7794",
-				     "renesas,rcar_sound-gen2";
-			reg = <0 0xec500000 0 0x1000>, /* SCU */
-			      <0 0xec5a0000 0 0x100>,  /* ADG */
-			      <0 0xec540000 0 0x1000>, /* SSIU */
-			      <0 0xec541000 0 0x280>,  /* SSI */
-			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri */
-			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
-			clocks = <&cpg CPG_MOD 1005>,
-				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
-				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
-				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
-				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
-				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
-				 <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
-				 <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>,
-				 <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
-				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
-				 <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
-				 <&cpg CPG_CORE R8A7794_CLK_M2>;
-			clock-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
-				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
-				      "ssi.1", "ssi.0",
-				      "src.6", "src.5", "src.4", "src.3",
-				      "src.2", "src.1",
-				      "ctu.0", "ctu.1",
-				      "mix.0", "mix.1",
-				      "dvc.0", "dvc.1",
-				      "clk_a", "clk_b", "clk_c", "clk_i";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 1005>,
-				 <&cpg 1006>, <&cpg 1007>,
-				 <&cpg 1008>, <&cpg 1009>,
-				 <&cpg 1010>, <&cpg 1011>,
-				 <&cpg 1012>, <&cpg 1013>,
-				 <&cpg 1014>, <&cpg 1015>;
-			reset-names = "ssi-all",
-				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
-				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
-				      "ssi.1", "ssi.0";
-
-			status = "disabled";
-
-			rcar_sound,dvc {
-				dvc0: dvc-0 {
-					dmas = <&audma0 0xbc>;
-					dma-names = "tx";
-				};
-				dvc1: dvc-1 {
-					dmas = <&audma0 0xbe>;
-					dma-names = "tx";
-				};
-			};
-
-			rcar_sound,mix {
-				mix0: mix-0 { };
-				mix1: mix-1 { };
-			};
-
-			rcar_sound,ctu {
-				ctu00: ctu-0 { };
-				ctu01: ctu-1 { };
-				ctu02: ctu-2 { };
-				ctu03: ctu-3 { };
-				ctu10: ctu-4 { };
-				ctu11: ctu-5 { };
-				ctu12: ctu-6 { };
-				ctu13: ctu-7 { };
-			};
-
-			rcar_sound,src {
-				src-0 {
-					status = "disabled";
-				};
-				src1: src-1 {
-					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x87>, <&audma0 0x9c>;
-					dma-names = "rx", "tx";
-				};
-				src2: src-2 {
-					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x89>, <&audma0 0x9e>;
-					dma-names = "rx", "tx";
-				};
-				src3: src-3 {
-					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
-					dma-names = "rx", "tx";
-				};
-				src4: src-4 {
-					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
-					dma-names = "rx", "tx";
-				};
-				src5: src-5 {
-					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
-					dma-names = "rx", "tx";
-				};
-				src6: src-6 {
-					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x91>, <&audma0 0xb4>;
-					dma-names = "rx", "tx";
-				};
-			};
-
-			rcar_sound,ssi {
-				ssi0: ssi-0 {
-					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x01>, <&audma0 0x02>,
-					       <&audma0 0x15>, <&audma0 0x16>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi1: ssi-1 {
-					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x03>, <&audma0 0x04>,
-					       <&audma0 0x49>, <&audma0 0x4a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi2: ssi-2 {
-					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x05>, <&audma0 0x06>,
-					       <&audma0 0x63>, <&audma0 0x64>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi3: ssi-3 {
-					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x07>, <&audma0 0x08>,
-					       <&audma0 0x6f>, <&audma0 0x70>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi4: ssi-4 {
-					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x09>, <&audma0 0x0a>,
-					       <&audma0 0x71>, <&audma0 0x72>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi5: ssi-5 {
-					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
-					       <&audma0 0x73>, <&audma0 0x74>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi6: ssi-6 {
-					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
-					       <&audma0 0x75>, <&audma0 0x76>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi7: ssi-7 {
-					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0f>, <&audma0 0x10>,
-					       <&audma0 0x79>, <&audma0 0x7a>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi8: ssi-8 {
-					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x11>, <&audma0 0x12>,
-					       <&audma0 0x7b>, <&audma0 0x7c>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-				ssi9: ssi-9 {
-					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x13>, <&audma0 0x14>,
-					       <&audma0 0x7d>, <&audma0 0x7e>;
-					dma-names = "rx", "tx", "rxu", "txu";
-				};
-			};
-		};
-
-		audma0: dma-controller@ec700000 {
-			compatible = "renesas,dmac-r8a7794",
-				     "renesas,rcar-dmac";
-			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					  "ch0", "ch1", "ch2", "ch3", "ch4",
-					  "ch5", "ch6", "ch7", "ch8", "ch9",
-					  "ch10", "ch11",
-					  "ch12";
-			clocks = <&cpg CPG_MOD 502>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 502>;
-			#dma-cells = <1>;
-			dma-channels = <13>;
-		};
-
-		pci0: pci@ee090000 {
-			compatible = "renesas,pci-r8a7794",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee090000 0 0xc00>,
-			      <0 0xee080000 0 0x1100>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x800 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x1000 0 0 0 0>;
-				phys = <&usb0 0>;
-				phy-names = "usb";
-			};
-		};
-
-		pci1: pci@ee0d0000 {
-			compatible = "renesas,pci-r8a7794",
-				     "renesas,pci-rcar-gen2";
-			device_type = "pci";
-			reg = <0 0xee0d0000 0 0xc00>,
-			      <0 0xee0c0000 0 0x1100>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
-			status = "disabled";
-
-			bus-range = <1 1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x10800 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x11000 0 0 0 0>;
-				phys = <&usb2 0>;
-				phy-names = "usb";
-			};
-		};
-
-		sdhi0: mmc@ee100000 {
-			compatible = "renesas,sdhi-r8a7794",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee100000 0 0x328>;
-			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
-			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
-			       <&dmac1 0xcd>, <&dmac1 0xce>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <195000000>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 314>;
-			status = "disabled";
-		};
-
-		sdhi1: mmc@ee140000 {
-			compatible = "renesas,sdhi-r8a7794",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee140000 0 0x100>;
-			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
-			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
-			       <&dmac1 0xc1>, <&dmac1 0xc2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 312>;
-			status = "disabled";
-		};
-
-		sdhi2: mmc@ee160000 {
-			compatible = "renesas,sdhi-r8a7794",
-				     "renesas,rcar-gen2-sdhi";
-			reg = <0 0xee160000 0 0x100>;
-			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
-			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
-			       <&dmac1 0xd3>, <&dmac1 0xd4>;
-			dma-names = "tx", "rx", "tx", "rx";
-			max-frequency = <97500000>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 311>;
-			status = "disabled";
-		};
-
-		mmcif0: mmc@ee200000 {
-			compatible = "renesas,mmcif-r8a7794",
-				     "renesas,sh-mmcif";
-			reg = <0 0xee200000 0 0x80>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 315>;
-			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
-			       <&dmac1 0xd1>, <&dmac1 0xd2>;
-			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 315>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		ether: ethernet@ee700000 {
-			compatible = "renesas,ether-r8a7794",
-				     "renesas,rcar-gen2-ether";
-			reg = <0 0xee700000 0 0x400>;
-			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 813>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 813>;
-			phy-mode = "rmii";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@f1001000 {
-			compatible = "arm,gic-400";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0 0xf1001000 0 0x1000>,
-			      <0 0xf1002000 0 0x2000>,
-			      <0 0xf1004000 0 0x2000>,
-			      <0 0xf1006000 0 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&cpg CPG_MOD 408>;
-			clock-names = "clk";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 408>;
-		};
-
-		vsp@fe928000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe928000 0 0x8000>;
-			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 131>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 131>;
-		};
-
-		vsp@fe930000 {
-			compatible = "renesas,vsp1";
-			reg = <0 0xfe930000 0 0x8000>;
-			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 128>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 128>;
-		};
-
-		fdp1@fe940000 {
-			compatible = "renesas,fdp1";
-			reg = <0 0xfe940000 0 0x2400>;
-			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 119>;
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 119>;
-		};
-
-		du: display@feb00000 {
-			compatible = "renesas,du-r8a7794";
-			reg = <0 0xfeb00000 0 0x40000>;
-			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
-			clock-names = "du.0", "du.1";
-			resets = <&cpg 724>;
-			reset-names = "du.0";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					du_out_rgb0: endpoint {
-					};
-				};
-				port@1 {
-					reg = <1>;
-					du_out_rgb1: endpoint {
-					};
-				};
-			};
-		};
-
-		prr: chipid@ff000044 {
-			compatible = "renesas,prr";
-			reg = <0 0xff000044 0 4>;
-		};
-
-		cmt0: timer@ffca0000 {
-			compatible = "renesas,r8a7794-cmt0",
-				     "renesas,rcar-gen2-cmt0";
-			reg = <0 0xffca0000 0 0x1004>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 124>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 124>;
-
-			status = "disabled";
-		};
-
-		cmt1: timer@e6130000 {
-			compatible = "renesas,r8a7794-cmt1",
-				     "renesas,rcar-gen2-cmt1";
-			reg = <0 0xe6130000 0 0x1004>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 329>;
-			clock-names = "fck";
-			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
-			resets = <&cpg 329>;
-
-			status = "disabled";
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	/* External USB clock - can be overridden by the board */
-	usb_extal_clk: usb_extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <48000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi
deleted file mode 100644
index 6e7589ea75624..0000000000000
--- a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common file for the AA121TD01 panel connected to Renesas R-Car boards
- *
- * Copyright (C) 2015 Renesas Electronics Corp.
- */
-
-/ {
-	panel {
-		compatible = "mitsubishi,aa121td01", "panel-lvds";
-
-		width-mm = <261>;
-		height-mm = <163>;
-		data-mapping = "jeida-18";
-
-		panel-timing {
-			/* 1280x800 @60Hz */
-			clock-frequency = <71000000>;
-			hactive = <1280>;
-			vactive = <800>;
-			hsync-len = <70>;
-			hfront-porch = <20>;
-			hback-porch = <70>;
-			vsync-len = <5>;
-			vfront-porch = <3>;
-			vback-porch = <15>;
-		};
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds_connector>;
-			};
-		};
-	};
-};
-
-&lvds_connector {
-	remote-endpoint = <&panel_in>;
-};
diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
deleted file mode 100644
index c18bbd7141c41..0000000000000
--- a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the RZN1D-DB Board
- *
- * Copyright (C) 2018 Renesas Electronics Europe Limited
- *
- */
-
-/dts-v1/;
-
-#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
-#include <dt-bindings/net/pcs-rzn1-miic.h>
-
-#include "r9a06g032.dtsi"
-
-/ {
-	model = "RZN1D-DB Board";
-	compatible = "renesas,rzn1d400-db", "renesas,r9a06g032";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-};
-
-&can0 {
-	pinctrl-0 = <&pins_can0>;
-	pinctrl-names = "default";
-
-	/* Assuming CN10/CN11 are wired for CAN1 */
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-0 = <&pins_can1>;
-	pinctrl-names = "default";
-
-	/* Please only enable can0 or can1, depending on CN10/CN11 */
-	/* status = "okay"; */
-};
-
-&eth_miic {
-	status = "okay";
-	renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
-};
-
-&gmac2 {
-	status = "okay";
-	phy-mode = "gmii";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&mii_conv4 {
-	renesas,miic-input = <MIIC_SWITCH_PORTB>;
-	status = "okay";
-};
-
-&mii_conv5 {
-	renesas,miic-input = <MIIC_SWITCH_PORTA>;
-	status = "okay";
-};
-
-&pinctrl{
-	pins_can0: pins_can0 {
-		pinmux = <RZN1_PINMUX(162, RZN1_FUNC_CAN)>,	/* CAN0_TXD */
-			 <RZN1_PINMUX(163, RZN1_FUNC_CAN)>;	/* CAN0_RXD */
-		drive-strength = <6>;
-	};
-
-	pins_can1: pins_can1 {
-		pinmux = <RZN1_PINMUX(109, RZN1_FUNC_CAN)>,	/* CAN1_TXD */
-			 <RZN1_PINMUX(110, RZN1_FUNC_CAN)>;	/* CAN1_RXD */
-		drive-strength = <6>;
-	};
-
-	pins_eth3: pins_eth3 {
-		pinmux = <RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(38, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(39, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(40, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(41, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(42, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(43, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(44, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(45, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(46, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(47, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
-		drive-strength = <6>;
-		bias-disable;
-	};
-
-	pins_eth4: pins_eth4 {
-		pinmux = <RZN1_PINMUX(48, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(49, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(50, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(51, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(52, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(53, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(54, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(55, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(56, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(57, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(58, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(59, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
-		drive-strength = <6>;
-		bias-disable;
-	};
-
-	pins_mdio1: pins_mdio1 {
-		pinmux = <RZN1_PINMUX(152, RZN1_FUNC_MDIO1_SWITCH)>,
-			 <RZN1_PINMUX(153, RZN1_FUNC_MDIO1_SWITCH)>;
-	};
-};
-
-&rtc0 {
-	status = "okay";
-};
-
-&switch {
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>;
-
-	dsa,member = <0 0>;
-
-	mdio {
-		clock-frequency = <2500000>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch0phy4: ethernet-phy@4 {
-			reg = <4>;
-			micrel,led-mode = <1>;
-		};
-
-		switch0phy5: ethernet-phy@5 {
-			reg = <5>;
-			micrel,led-mode = <1>;
-		};
-	};
-};
-
-&switch_port0 {
-	label = "lan0";
-	phy-mode = "mii";
-	phy-handle = <&switch0phy5>;
-	status = "okay";
-};
-
-&switch_port1 {
-	label = "lan1";
-	phy-mode = "mii";
-	phy-handle = <&switch0phy4>;
-	status = "okay";
-};
-
-&switch_port4 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&wdt0 {
-	timeout-sec = <60>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
deleted file mode 100644
index 0fa565a1c3ad3..0000000000000
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ /dev/null
@@ -1,477 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Base Device Tree Source for the Renesas RZ/N1D (R9A06G032)
- *
- * Copyright (C) 2018 Renesas Electronics Europe Limited
- *
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/r9a06g032-sysctrl.h>
-
-/ {
-	compatible = "renesas,r9a06g032";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			clocks = <&sysctrl R9A06G032_CLK_A7MP>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-			clocks = <&sysctrl R9A06G032_CLK_A7MP>;
-			enable-method = "renesas,r9a06g032-smp";
-			cpu-release-addr = <0 0x4000c204>;
-		};
-	};
-
-	ext_jtag_clk: extjtagclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ext_mclk: extmclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <40000000>;
-	};
-
-	ext_rgmii_ref: extrgmiiref {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ext_rtc_clk: extrtcclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&gic>;
-		ranges;
-
-		rtc0: rtc@40006000 {
-			compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc";
-			reg = <0x40006000 0x1000>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "alarm", "timer", "pps";
-			clocks = <&sysctrl R9A06G032_HCLK_RTC>;
-			clock-names = "hclk";
-			power-domains = <&sysctrl>;
-			status = "disabled";
-		};
-
-		wdt0: watchdog@40008000 {
-			compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt";
-			reg = <0x40008000 0x1000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>;
-			status = "disabled";
-		};
-
-		wdt1: watchdog@40009000 {
-			compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt";
-			reg = <0x40009000 0x1000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>;
-			status = "disabled";
-		};
-
-		sysctrl: system-controller@4000c000 {
-			compatible = "renesas,r9a06g032-sysctrl";
-			reg = <0x4000c000 0x1000>;
-			status = "okay";
-			#clock-cells = <1>;
-			#power-domain-cells = <0>;
-
-			clocks = <&ext_mclk>, <&ext_rtc_clk>,
-					<&ext_jtag_clk>, <&ext_rgmii_ref>;
-			clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			dmamux: dma-router@a0 {
-				compatible = "renesas,rzn1-dmamux";
-				reg = <0xa0 4>;
-				#dma-cells = <6>;
-				dma-requests = <32>;
-				dma-masters = <&dma0 &dma1>;
-			};
-		};
-
-		udc: usb@4001e000 {
-			compatible = "renesas,r9a06g032-usbf", "renesas,rzn1-usbf";
-			reg = <0x4001e000 0x2000>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysctrl R9A06G032_HCLK_USBF>,
-				 <&sysctrl R9A06G032_HCLK_USBPM>;
-			clock-names = "hclkf", "hclkpm";
-			power-domains = <&sysctrl>;
-			status = "disabled";
-		};
-
-		pci_usb: pci@40030000 {
-			compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1";
-			device_type = "pci";
-			clocks = <&sysctrl R9A06G032_HCLK_USBH>,
-				 <&sysctrl R9A06G032_HCLK_USBPM>,
-				 <&sysctrl R9A06G032_CLK_PCI_USB>;
-			clock-names = "hclkh", "hclkpm", "pciclk";
-			power-domains = <&sysctrl>;
-			reg = <0x40030000 0xc00>,
-			      <0x40020000 0x1100>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-
-			bus-range = <0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>;
-			/* Should map all possible DDR as inbound ranges, but
-			 * the IP only supports a 256MB, 512MB, or 1GB window.
-			 * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit)
-			 */
-			dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>;
-			interrupt-map-mask = <0xf800 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-
-			usb@1,0 {
-				reg = <0x800 0 0 0 0>;
-				phys = <&usbphy>;
-				phy-names = "usb";
-			};
-
-			usb@2,0 {
-				reg = <0x1000 0 0 0 0>;
-				phys = <&usbphy>;
-				phy-names = "usb";
-			};
-		};
-
-		uart0: serial@40060000 {
-			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
-			reg = <0x40060000 0x400>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>;
-			clock-names = "baudclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		uart1: serial@40061000 {
-			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
-			reg = <0x40061000 0x400>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&sysctrl R9A06G032_CLK_UART1>, <&sysctrl R9A06G032_HCLK_UART1>;
-			clock-names = "baudclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		uart2: serial@40062000 {
-			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
-			reg = <0x40062000 0x400>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&sysctrl R9A06G032_CLK_UART2>, <&sysctrl R9A06G032_HCLK_UART2>;
-			clock-names = "baudclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		uart3: serial@50000000 {
-			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
-			reg = <0x50000000 0x400>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
-			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart4: serial@50001000 {
-			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
-			reg = <0x50001000 0x400>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
-			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart5: serial@50002000 {
-			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
-			reg = <0x50002000 0x400>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
-			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart6: serial@50003000 {
-			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
-			reg = <0x50003000 0x400>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
-			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart7: serial@50004000 {
-			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
-			reg = <0x50004000 0x400>;
-			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
-			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		pinctrl: pinctrl@40067000 {
-			compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
-			reg = <0x40067000 0x1000>, <0x51000000 0x480>;
-			clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
-			clock-names = "bus";
-			status = "okay";
-		};
-
-		nand_controller: nand-controller@40102000 {
-			compatible = "renesas,r9a06g032-nandc", "renesas,rzn1-nandc";
-			reg = <0x40102000 0x2000>;
-			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>;
-			clock-names = "hclk", "eclk";
-			power-domains = <&sysctrl>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		dma0: dma-controller@40104000 {
-			compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma";
-			reg = <0x40104000 0x1000>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "hclk";
-			clocks = <&sysctrl R9A06G032_HCLK_DMA0>;
-			dma-channels = <8>;
-			dma-requests = <16>;
-			dma-masters = <1>;
-			#dma-cells = <3>;
-			block_size = <0xfff>;
-			data-width = <8>;
-		};
-
-		dma1: dma-controller@40105000 {
-			compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma";
-			reg = <0x40105000 0x1000>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "hclk";
-			clocks = <&sysctrl R9A06G032_HCLK_DMA1>;
-			dma-channels = <8>;
-			dma-requests = <16>;
-			dma-masters = <1>;
-			#dma-cells = <3>;
-			block_size = <0xfff>;
-			data-width = <8>;
-		};
-
-		gmac2: ethernet@44002000 {
-			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
-			reg = <0x44002000 0x2000>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
-			clocks = <&sysctrl R9A06G032_HCLK_GMAC1>;
-			clock-names = "stmmaceth";
-			power-domains = <&sysctrl>;
-			snps,multicast-filter-bins = <256>;
-			snps,perfect-filter-entries = <128>;
-			tx-fifo-depth = <2048>;
-			rx-fifo-depth = <4096>;
-			status = "disabled";
-		};
-
-		eth_miic: eth-miic@44030000 {
-			compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x44030000 0x10000>;
-			clocks = <&sysctrl R9A06G032_CLK_MII_REF>,
-				 <&sysctrl R9A06G032_CLK_RGMII_REF>,
-				 <&sysctrl R9A06G032_CLK_RMII_REF>,
-				 <&sysctrl R9A06G032_HCLK_SWITCH_RG>;
-			clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk";
-			power-domains = <&sysctrl>;
-			status = "disabled";
-
-			mii_conv1: mii-conv@1 {
-				reg = <1>;
-				status = "disabled";
-			};
-
-			mii_conv2: mii-conv@2 {
-				reg = <2>;
-				status = "disabled";
-			};
-
-			mii_conv3: mii-conv@3 {
-				reg = <3>;
-				status = "disabled";
-			};
-
-			mii_conv4: mii-conv@4 {
-				reg = <4>;
-				status = "disabled";
-			};
-
-			mii_conv5: mii-conv@5 {
-				reg = <5>;
-				status = "disabled";
-			};
-		};
-
-		switch: switch@44050000 {
-			compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw";
-			reg = <0x44050000 0x10000>;
-			clocks = <&sysctrl R9A06G032_HCLK_SWITCH>,
-				 <&sysctrl R9A06G032_CLK_SWITCH>;
-			clock-names = "hclk", "clk";
-			power-domains = <&sysctrl>;
-			status = "disabled";
-
-			ethernet-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switch_port0: port@0 {
-					reg = <0>;
-					pcs-handle = <&mii_conv5>;
-					status = "disabled";
-				};
-
-				switch_port1: port@1 {
-					reg = <1>;
-					pcs-handle = <&mii_conv4>;
-					status = "disabled";
-				};
-
-				switch_port2: port@2 {
-					reg = <2>;
-					pcs-handle = <&mii_conv3>;
-					status = "disabled";
-				};
-
-				switch_port3: port@3 {
-					reg = <3>;
-					pcs-handle = <&mii_conv2>;
-					status = "disabled";
-				};
-
-				switch_port4: port@4 {
-					reg = <4>;
-					ethernet = <&gmac2>;
-					label = "cpu";
-					phy-mode = "internal";
-					status = "disabled";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-
-		gic: interrupt-controller@44101000 {
-			compatible = "arm,gic-400", "arm,cortex-a7-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x44101000 0x1000>, /* Distributer */
-			      <0x44102000 0x2000>, /* CPU interface */
-			      <0x44104000 0x2000>, /* Virt interface control */
-			      <0x44106000 0x2000>; /* Virt CPU interface */
-			interrupts =
-				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		can0: can@52104000 {
-			compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000";
-			reg = <0x52104000 0x800>;
-			reg-io-width = <4>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysctrl R9A06G032_HCLK_CAN0>;
-			power-domains = <&sysctrl>;
-			status = "disabled";
-		};
-
-		can1: can@52105000 {
-			compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
-			reg = <0x52105000 0x800>;
-			reg-io-width = <4>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysctrl R9A06G032_HCLK_CAN1>;
-			power-domains = <&sysctrl>;
-			status = "disabled";
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&gic>;
-		arm,cpu-registers-not-fw-configured;
-		always-on;
-		interrupts =
-			<GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	usbphy: usb-phy {
-		#phy-cells = <0>;
-		compatible = "usb-nop-xceiv";
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts b/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts
deleted file mode 100644
index 98e34248ae80b..0000000000000
--- a/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Andreas Färber
- * Copyright (c) 2018 Manivannan Sadhasivam
- */
-
-/dts-v1/;
-
-#include "rda8810pl.dtsi"
-
-/ {
-	compatible = "xunlong,orangepi-2g-iot", "rda,8810pl";
-	model = "Orange Pi 2G-IoT";
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial2:921600n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	uart_clk: uart-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <921600>;
-		#clock-cells = <0>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-	clocks = <&uart_clk>;
-};
-
-&uart2 {
-	status = "okay";
-	clocks = <&uart_clk>;
-};
-
-&uart3 {
-	status = "okay";
-	clocks = <&uart_clk>;
-};
diff --git a/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts b/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts
deleted file mode 100644
index 728f76931b995..0000000000000
--- a/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Andreas Färber
- * Copyright (c) 2018 Manivannan Sadhasivam
- */
-
-/dts-v1/;
-
-#include "rda8810pl.dtsi"
-
-/ {
-	compatible = "xunlong,orangepi-i96", "rda,8810pl";
-	model = "Orange Pi i96";
-
-	aliases {
-		serial0 = &uart2;
-		serial1 = &uart1;
-		serial2 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial2:921600n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	uart_clk: uart-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <921600>;
-		#clock-cells = <0>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-	clocks = <&uart_clk>;
-};
-
-&uart2 {
-	status = "okay";
-	clocks = <&uart_clk>;
-};
-
-&uart3 {
-	status = "okay";
-	clocks = <&uart_clk>;
-};
diff --git a/arch/arm/boot/dts/rda8810pl.dtsi b/arch/arm/boot/dts/rda8810pl.dtsi
deleted file mode 100644
index f30d6ece49fb3..0000000000000
--- a/arch/arm/boot/dts/rda8810pl.dtsi
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * RDA8810PL SoC
- *
- * Copyright (c) 2017 Andreas Färber
- * Copyright (c) 2018 Manivannan Sadhasivam
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "rda,8810pl";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <0x0>;
-		};
-	};
-
-	sram@100000 {
-		compatible = "mmio-sram";
-		reg = <0x100000 0x10000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-	};
-
-	modem@10000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x10000000 0xfffffff>;
-
-		gpioc@1a08000 {
-			compatible = "rda,8810pl-gpio";
-			reg = <0x1a08000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			ngpios = <32>;
-		};
-	};
-
-	apb@20800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x20800000 0x100000>;
-
-		intc: interrupt-controller@0 {
-			compatible = "rda,8810pl-intc";
-			reg = <0x0 0x1000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	apb@20900000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x20900000 0x100000>;
-
-		timer@10000 {
-			compatible = "rda,8810pl-timer";
-			reg = <0x10000 0x1000>;
-			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>,
-				     <17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hwtimer", "ostimer";
-		};
-
-		gpioa@30000 {
-			compatible = "rda,8810pl-gpio";
-			reg = <0x30000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		gpiob@31000 {
-			compatible = "rda,8810pl-gpio";
-			reg = <0x31000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		gpiod@32000 {
-			compatible = "rda,8810pl-gpio";
-			reg = <0x32000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	apb@20a00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x20a00000 0x100000>;
-
-		uart1: serial@0 {
-			compatible = "rda,8810pl-uart";
-			reg = <0x0 0x1000>;
-			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		uart2: serial@10000 {
-			compatible = "rda,8810pl-uart";
-			reg = <0x10000 0x1000>;
-			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		uart3: serial@90000 {
-			compatible = "rda,8810pl-uart";
-			reg = <0x90000 0x1000>;
-			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-	};
-
-	l2: cache-controller@21100000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x21100000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-};
diff --git a/arch/arm/boot/dts/realtek/Makefile b/arch/arm/boot/dts/realtek/Makefile
new file mode 100644
index 0000000000000..c83671b5560fb
--- /dev/null
+++ b/arch/arm/boot/dts/realtek/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_REALTEK) += \
+	rtd1195-horseradish.dtb \
+	rtd1195-mele-x1000.dtb
diff --git a/arch/arm/boot/dts/realtek/rtd1195-horseradish.dts b/arch/arm/boot/dts/realtek/rtd1195-horseradish.dts
new file mode 100644
index 0000000000000..9d06d3d34c744
--- /dev/null
+++ b/arch/arm/boot/dts/realtek/rtd1195-horseradish.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1195.dtsi"
+
+/ {
+	compatible = "realtek,horseradish", "realtek,rtd1195";
+	model = "Realtek Horseradish EVB";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@a800 {
+		device_type = "memory";
+		reg = <0x0000a800 0x17ff5800>, /* boot ROM to r-bus */
+		      <0x18070000 0x00090000>, /* r-bus to NOR flash */
+		      <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/realtek/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/realtek/rtd1195-mele-x1000.dts
new file mode 100644
index 0000000000000..c7951b9a2c97b
--- /dev/null
+++ b/arch/arm/boot/dts/realtek/rtd1195-mele-x1000.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1195.dtsi"
+
+/ {
+	compatible = "mele,x1000", "realtek,rtd1195";
+	model = "MeLE X1000";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@a800 {
+		device_type = "memory";
+		reg = <0x0000a800 0x17ff5800>, /* boot ROM to r-bus */
+		      <0x18070000 0x00090000>, /* r-bus to NOR flash */
+		      <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/realtek/rtd1195.dtsi b/arch/arm/boot/dts/realtek/rtd1195.dtsi
new file mode 100644
index 0000000000000..21897210d9d0c
--- /dev/null
+++ b/arch/arm/boot/dts/realtek/rtd1195.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/memreserve/ 0x00000000 0x0000a800; /* boot code */
+/memreserve/ 0x0000a800 0x000f5800;
+/memreserve/ 0x17fff000 0x00001000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/realtek,rtd1195.h>
+
+/ {
+	compatible = "realtek,rtd1195";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@b000 {
+			reg = <0x0000b000 0x1000>;
+		};
+
+		audio@1b00000 {
+			reg = <0x01b00000 0x400000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x01ffe000 0x4000>;
+		};
+
+		secure@10000000 {
+			reg = <0x10000000 0x100000>;
+			no-map;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <27000000>;
+	};
+
+	osc27M: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+		clock-output-names = "osc27M";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x0000a800>,
+			 <0x18000000 0x18000000 0x00070000>,
+			 <0x18100000 0x18100000 0x01000000>,
+			 <0x80000000 0x80000000 0x80000000>;
+
+		rbus: bus@18000000 {
+			compatible = "simple-bus";
+			reg = <0x18000000 0x70000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000000 0x70000>;
+
+			crt: syscon@0 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x0 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x1000>;
+			};
+
+			iso: syscon@7000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x7000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x1000>;
+			};
+
+			sb2: syscon@1a000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1a000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1a000 0x1000>;
+			};
+
+			misc: syscon@1b000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1b000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1b000 0x1000>;
+			};
+
+			scpu_wrapper: syscon@1d000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1d000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1d000 0x1000>;
+			};
+		};
+
+		gic: interrupt-controller@ff011000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0xff011000 0x1000>,
+			      <0xff012000 0x2000>,
+			      <0xff014000 0x2000>,
+			      <0xff016000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
+
+&crt {
+	reset1: reset-controller@0 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x0 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset2: reset-controller@4 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x4 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset3: reset-controller@8 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x8 0x4>;
+		#reset-cells = <1>;
+	};
+};
+
+&iso {
+	iso_reset: reset-controller@88 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x88 0x4>;
+		#reset-cells = <1>;
+	};
+
+	wdt: watchdog@680 {
+		compatible = "realtek,rtd1295-watchdog";
+		reg = <0x680 0x100>;
+		clocks = <&osc27M>;
+	};
+
+	uart0: serial@800 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x800 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		resets = <&iso_reset RTD1195_ISO_RSTN_UR0>;
+		clock-frequency = <27000000>;
+		status = "disabled";
+	};
+};
+
+&misc {
+	uart1: serial@200 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x200 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		resets = <&reset2 RTD1195_RSTN_UR1>;
+		clock-frequency = <27000000>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/renesas/Makefile b/arch/arm/boot/dts/renesas/Makefile
new file mode 100644
index 0000000000000..833a02447ecf7
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/Makefile
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_RENESAS) += \
+	emev2-kzm9d.dtb \
+	r7s72100-genmai.dtb \
+	r7s72100-gr-peach.dtb \
+	r7s72100-rskrza1.dtb \
+	r7s9210-rza2mevb.dtb \
+	r8a73a4-ape6evm.dtb \
+	r8a7740-armadillo800eva.dtb \
+	r8a7742-iwg21d-q7.dtb \
+	r8a7742-iwg21d-q7-dbcm-ca.dtb \
+	r8a7743-iwg20d-q7.dtb \
+	r8a7743-iwg20d-q7-dbcm-ca.dtb \
+	r8a7743-sk-rzg1m.dtb \
+	r8a7744-iwg20d-q7.dtb \
+	r8a7744-iwg20d-q7-dbcm-ca.dtb \
+	r8a7745-iwg22d-sodimm.dtb \
+	r8a7745-iwg22d-sodimm-dbhd-ca.dtb \
+	r8a7745-sk-rzg1e.dtb \
+	r8a77470-iwg23s-sbc.dtb \
+	r8a7778-bockw.dtb \
+	r8a7779-marzen.dtb \
+	r8a7790-lager.dtb \
+	r8a7790-stout.dtb \
+	r8a7791-koelsch.dtb \
+	r8a7791-porter.dtb \
+	r8a7792-blanche.dtb \
+	r8a7792-wheat.dtb \
+	r8a7793-gose.dtb \
+	r8a7794-alt.dtb \
+	r8a7794-silk.dtb \
+	r9a06g032-rzn1d400-db.dtb \
+	sh73a0-kzm9g.dtb
diff --git a/arch/arm/boot/dts/renesas/emev2-kzm9d.dts b/arch/arm/boot/dts/renesas/emev2-kzm9d.dts
new file mode 100644
index 0000000000000..89495dd373585
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/emev2-kzm9d.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the KZM9D board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ */
+/dts-v1/;
+
+#include "emev2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "EMEV2 KZM9D Board";
+	compatible = "renesas,kzm9d", "renesas,emev2";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x8000000>;
+	};
+
+	aliases {
+		serial1 = &uart1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial1:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		one {
+			debounce-interval = <50>;
+			wakeup-source;
+			label = "DSW2-1";
+			linux,code = <KEY_1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+		two {
+			debounce-interval = <50>;
+			wakeup-source;
+			label = "DSW2-2";
+			linux,code = <KEY_2>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		three {
+			debounce-interval = <50>;
+			wakeup-source;
+			label = "DSW2-3";
+			linux,code = <KEY_3>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+		four {
+			debounce-interval = <50>;
+			wakeup-source;
+			label = "DSW2-4";
+			linux,code = <KEY_4>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	ethernet@20000000 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <0x20000000 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
+	};
+};
+
+&iic0 {
+	status = "okay";
+};
+
+&iic1 {
+	status = "okay";
+};
+
+&pfc {
+	uart1_pins: uart1 {
+		groups = "uart1_ctrl", "uart1_data";
+		function = "uart1";
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/renesas/emev2.dtsi b/arch/arm/boot/dts/renesas/emev2.dtsi
new file mode 100644
index 0000000000000..ecfaa0b7523e8
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/emev2.dtsi
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Emma Mobile EV2 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,emev2";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		i2c0 = &iic0;
+		i2c1 = &iic1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <533000000>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clock-frequency = <533000000>;
+		};
+	};
+
+	gic: interrupt-controller@e0020000 {
+		compatible = "arm,pl390";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0xe0028000 0x1000>,
+		      <0xe0020000 0x0100>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	clocks@e0110000 {
+		compatible = "renesas,emev2-smu";
+		reg = <0xe0110000 0x10000>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		c32ki: c32ki {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+		iic0_sclkdiv: iic0_sclkdiv@624,0 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x624 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		iic0_sclk: iic0_sclk@48c,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x48c 1>;
+			clocks = <&iic0_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		iic1_sclkdiv: iic1_sclkdiv@624,16 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x624 16>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		iic1_sclk: iic1_sclk@490,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x490 1>;
+			clocks = <&iic1_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		pll3_fo: pll3_fo {
+			compatible = "fixed-factor-clock";
+			clocks = <&c32ki>;
+			clock-div = <1>;
+			clock-mult = <7000>;
+			#clock-cells = <0>;
+		};
+		usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x610 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usib_u1_sclkdiv: usib_u1_sclkdiv@65c,0 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x65c 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usib_u2_sclkdiv: usib_u2_sclkdiv@65c,16 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x65c 16>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usib_u3_sclkdiv: usib_u3_sclkdiv@660,0 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x660 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usia_u0_sclk: usia_u0_sclk@4a0,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4a0 1>;
+			clocks = <&usia_u0_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		usib_u1_sclk: usib_u1_sclk@4b8,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4b8 1>;
+			clocks = <&usib_u1_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		usib_u2_sclk: usib_u2_sclk@4bc,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4bc 1>;
+			clocks = <&usib_u2_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		usib_u3_sclk: usib_u3_sclk@4c0,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4c0 1>;
+			clocks = <&usib_u3_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		sti_sclk: sti_sclk@528,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x528 1>;
+			clocks = <&c32ki>;
+			#clock-cells = <0>;
+		};
+	};
+
+	timer@e0180000 {
+		compatible = "renesas,em-sti";
+		reg = <0xe0180000 0x54>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sti_sclk>;
+		clock-names = "sclk";
+	};
+
+	uart0: serial@e1020000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1020000 0x38>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usia_u0_sclk>;
+		clock-names = "sclk";
+	};
+
+	uart1: serial@e1030000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1030000 0x38>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usib_u1_sclk>;
+		clock-names = "sclk";
+	};
+
+	uart2: serial@e1040000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1040000 0x38>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usib_u2_sclk>;
+		clock-names = "sclk";
+	};
+
+	uart3: serial@e1050000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1050000 0x38>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usib_u3_sclk>;
+		clock-names = "sclk";
+	};
+
+	pfc: pinctrl@e0140200 {
+		compatible = "renesas,pfc-emev2";
+		reg = <0xe0140200 0x100>;
+	};
+
+	gpio0: gpio@e0050000 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio1: gpio@e0050080 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio2: gpio@e0050100 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
+		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio3: gpio@e0050180 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio4: gpio@e0050200 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 31>;
+		#gpio-cells = <2>;
+		ngpios = <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	iic0: i2c@e0070000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-emev2";
+		reg = <0xe0070000 0x28>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&iic0_sclk>;
+		clock-names = "sclk";
+		status = "disabled";
+	};
+
+	iic1: i2c@e10a0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-emev2";
+		reg = <0xe10a0000 0x28>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&iic1_sclk>;
+		clock-names = "sclk";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/renesas/gr-peach-audiocamerashield.dtsi b/arch/arm/boot/dts/renesas/gr-peach-audiocamerashield.dtsi
new file mode 100644
index 0000000000000..8d77579807ecf
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/gr-peach-audiocamerashield.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the GR-Peach audiocamera shield expansion board
+ *
+ * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+
+/ {
+	/* On-board camera clock. */
+	camera_clk: camera_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&pinctrl {
+	i2c1_pins: i2c1 {
+		/* P1_2 as SCL; P1_3 as SDA */
+		pinmux = <RZA1_PINMUX(1, 2, 1)>, <RZA1_PINMUX(1, 3, 1)>;
+	};
+
+	vio_pins: vio {
+		/* CEU pins: VIO_D[0-10], VIO_VD, VIO_HD, VIO_CLK */
+		pinmux = <RZA1_PINMUX(1, 0, 5)>, /* VIO_VD */
+			 <RZA1_PINMUX(1, 1, 5)>, /* VIO_HD */
+			 <RZA1_PINMUX(2, 0, 7)>, /* VIO_D0 */
+			 <RZA1_PINMUX(2, 1, 7)>, /* VIO_D1 */
+			 <RZA1_PINMUX(2, 2, 7)>, /* VIO_D2 */
+			 <RZA1_PINMUX(2, 3, 7)>, /* VIO_D3 */
+			 <RZA1_PINMUX(2, 4, 7)>, /* VIO_D4 */
+			 <RZA1_PINMUX(2, 5, 7)>, /* VIO_D5 */
+			 <RZA1_PINMUX(2, 6, 7)>, /* VIO_D6 */
+			 <RZA1_PINMUX(2, 7, 7)>, /* VIO_D7 */
+			 <RZA1_PINMUX(10, 0, 6)>; /* VIO_CLK */
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	camera@48 {
+		compatible = "aptina,mt9v111";
+		reg = <0x48>;
+
+		clocks = <&camera_clk>;
+
+		port {
+			mt9v111_out: endpoint {
+				remote-endpoint = <&ceu_in>;
+			};
+		};
+	};
+};
+
+&ceu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vio_pins>;
+
+	status = "okay";
+
+	port {
+		ceu_in: endpoint {
+			remote-endpoint = <&mt9v111_out>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/renesas/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/renesas/iwg20d-q7-common.dtsi
new file mode 100644
index 0000000000000..4351c5a02fa59
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/iwg20d-q7-common.dtsi
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/*
+ * SSI-SGTL5000
+ *
+ * This command is required when Playback/Capture
+ *
+ *      amixer set "DVC Out" 100%
+ *      amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *      amixer set "DVC Out Mute" on
+ *      amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *      amixer set "DVC Out Ramp" on
+ *      aplay xxx.wav &
+ *      amixer set "DVC Out"  80%  // Volume Down
+ *      amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/ {
+	aliases {
+		serial0 = &scif0;
+		serial3 = &scifb1;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	lcd_backlight: backlight {
+		compatible = "pwm-backlight";
+
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	lvds-receiver {
+		compatible = "ti,ds90cf384a", "lvds-decoder";
+		power-supply = <&vcc_3v3_tft1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds_receiver_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				lvds_receiver_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0dh6";
+		backlight = <&lcd_backlight>;
+		power-supply = <&vcc_3v3_tft1>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_receiver_out>;
+			};
+		};
+	};
+
+	reg_1p5v: 1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	rsnd_sgtl5000: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
+	vcc_3v3_tft1: regulator-panel {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vcc-3v3-tft1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		startup-delay-us = <500>;
+		gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy3>;
+	phy-mode = "gmii";
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&du {
+	status = "okay";
+};
+
+&gpio2 {
+	touch-interrupt-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+	};
+};
+
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc@68 {
+		compatible = "ti,bq32000";
+		reg = <0x68>;
+	};
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		clocks = <&audio_clock>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p5v>;
+	};
+
+	touch: touchpanel@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&vcc_3v3_tft1>;
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_receiver_in>;
+			};
+		};
+	};
+};
+
+&pci0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pfc {
+	can0_pins: can0 {
+		groups = "can0_data_d";
+		function = "can0";
+	};
+
+	avb_pins: avb {
+		groups = "avb_mdio", "avb_gmii";
+		function = "avb";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	pwm3_pins: pwm3 {
+		groups = "pwm3";
+		function = "pwm3";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data_d";
+		function = "scif0";
+	};
+
+	scifb1_pins: scifb1 {
+		groups = "scifb1_data_d", "scifb1_ctrl";
+		function = "scifb1";
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&pwm3 {
+	pinctrl-0 = <&pwm3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi1>, <&src3>, <&dvc1>;
+			capture = <&ssi0>, <&src2>, <&dvc0>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scifb1 {
+	pinctrl-0 = <&scifb1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi
new file mode 100644
index 0000000000000..e10f99278c77a
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/ {
+	aliases {
+		serial1 = &scif1;
+		serial4 = &hscif1;
+	};
+
+	cec_clock: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&cec_clock>;
+		clock-names = "cec";
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&pfc {
+	can1_pins: can1 {
+		groups = "can1_data_d";
+		function = "can1";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
+		function = "du";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_c", "hscif1_ctrl_c";
+		function = "hscif1";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_d";
+		function = "scif1";
+	};
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
new file mode 100644
index 0000000000000..1e8447176b105
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Genmai board
+ *
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+
+/ {
+	model = "Genmai";
+	compatible = "renesas,genmai", "renesas,r7s72100";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@8000000 {
+		device_type = "memory";
+		reg = <0x08000000 0x08000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	leds {
+		status = "okay";
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&port4 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			gpios = <&port4 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl {
+
+	scif2_pins: serial2 {
+		/* P3_0 as TxD2; P3_2 as RxD2 */
+		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
+	};
+
+	i2c2_pins: i2c2 {
+		/* RIIC2: P1_4 as SCL, P1_5 as SDA */
+		pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
+	};
+
+	ether_pins: ether {
+		/* Ethernet on Ports 1,2,3,5 */
+		pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL  */
+			 <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC   */
+			 <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
+			 <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
+			 <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER  */
+			 <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV  */
+			 <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */
+			 <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER  */
+			 <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN  */
+			 <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS   */
+			 <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0  */
+			 <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1  */
+			 <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2  */
+			 <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3  */
+			 <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0  */
+			 <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1  */
+			 <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */
+			 <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */
+	};
+};
+
+&extal_clk {
+	clock-frequency = <13330000>;
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&rtc_x1_clk {
+	clock-frequency = <32768>;
+};
+
+&mtu2 {
+	status = "okay";
+};
+
+&ether {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ether_pins>;
+
+	status = "okay";
+
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-idb824.2814",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	eeprom@50 {
+		compatible = "renesas,r1ex24128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scif2_pins>;
+
+	status = "okay";
+};
+
+&spi4 {
+	status = "okay";
+
+	codec: codec@0 {
+		compatible = "wlf,wm8978";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts b/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts
new file mode 100644
index 0000000000000..105f9c71f9fd5
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the GR-Peach board
+ *
+ * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ * Copyright (C) 2016 Renesas Electronics
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+
+/ {
+	model = "GR-Peach";
+	compatible = "renesas,gr-peach", "renesas,r7s72100";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/mtdblock0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x00a00000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	flash@18000000 {
+		compatible = "mtd-rom";
+		probe-type = "map_rom";
+		reg = <0x18000000 0x00800000>;
+		bank-width = <4>;
+		device-width = <1>;
+
+		clocks = <&mstp9_clks R7S72100_CLK_SPIBSC0>;
+		power-domains = <&cpg_clocks>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		rootfs@600000 {
+			label = "rootfs";
+			reg = <0x00600000 0x00200000>;
+		};
+	};
+
+	leds {
+		status = "okay";
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&port6 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	scif2_pins: serial2 {
+		/* P6_2 as RxD2; P6_3 as TxD2 */
+		pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>;
+	};
+
+	ether_pins: ether {
+		/* Ethernet on Ports 1,3,5,10 */
+		pinmux = <RZA1_PINMUX(1, 14, 4)>, /* P1_14 = ET_COL   */
+			 <RZA1_PINMUX(3, 0, 2)>,  /* P3_0 = ET_TXCLK  */
+			 <RZA1_PINMUX(3, 3, 2)>,  /* P3_3 = ET_MDIO   */
+			 <RZA1_PINMUX(3, 4, 2)>,  /* P3_4 = ET_RXCLK  */
+			 <RZA1_PINMUX(3, 5, 2)>,  /* P3_5 = ET_RXER   */
+			 <RZA1_PINMUX(3, 6, 2)>,  /* P3_6 = ET_RXDV   */
+			 <RZA1_PINMUX(5, 9, 2)>,  /* P5_9 = ET_MDC    */
+			 <RZA1_PINMUX(10, 1, 4)>, /* P10_1 = ET_TXER  */
+			 <RZA1_PINMUX(10, 2, 4)>, /* P10_2 = ET_TXEN  */
+			 <RZA1_PINMUX(10, 3, 4)>, /* P10_3 = ET_CRS   */
+			 <RZA1_PINMUX(10, 4, 4)>, /* P10_4 = ET_TXD0  */
+			 <RZA1_PINMUX(10, 5, 4)>, /* P10_5 = ET_TXD1  */
+			 <RZA1_PINMUX(10, 6, 4)>, /* P10_6 = ET_TXD2  */
+			 <RZA1_PINMUX(10, 7, 4)>, /* P10_7 = ET_TXD3  */
+			 <RZA1_PINMUX(10, 8, 4)>, /* P10_8 = ET_RXD0  */
+			 <RZA1_PINMUX(10, 9, 4)>, /* P10_9 = ET_RXD1  */
+			 <RZA1_PINMUX(10, 10, 4)>,/* P10_10 = ET_RXD2 */
+			 <RZA1_PINMUX(10, 11, 4)>;/* P10_11 = ET_RXD3 */
+	};
+};
+
+&extal_clk {
+	clock-frequency = <13333000>;
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&mtu2 {
+	status = "okay";
+};
+
+&ostm0 {
+	status = "okay";
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scif2_pins>;
+
+	status = "okay";
+};
+
+&ether {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ether_pins>;
+
+	status = "okay";
+
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0007.c0f0",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+
+		reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <5>;
+	};
+};
diff --git a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
new file mode 100644
index 0000000000000..1c5acf6944074
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/A1H RSK board
+ *
+ * Copyright (C) 2016 Renesas Electronics
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+
+/ {
+	model = "RSKRZA1";
+	compatible = "renesas,rskrza1", "renesas,r7s72100";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@8000000 {
+		device_type = "memory";
+		reg = <0x08000000 0x02000000>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&keyboard_pins>;
+
+		key-1 {
+			interrupt-parent = <&irqc>;
+			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+			linux,code = <KEY_1>;
+			label = "SW1";
+			wakeup-source;
+		};
+
+		key-2 {
+			interrupt-parent = <&irqc>;
+			interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+			linux,code = <KEY_2>;
+			label = "SW2";
+			wakeup-source;
+		};
+
+		key-3 {
+			interrupt-parent = <&irqc>;
+			interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
+			linux,code = <KEY_3>;
+			label = "SW3";
+			wakeup-source;
+		};
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&port7 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			gpios = <&io_expander1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			gpios = <&io_expander1 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			gpios = <&io_expander1 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <13330000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	io_expander1: gpio@20 {
+		compatible = "onnn,cat9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	io_expander2: gpio@21 {
+		compatible = "onnn,cat9554";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "renesas,r1ex24016", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&rtc_x1_clk {
+	clock-frequency = <32768>;
+};
+
+&pinctrl {
+	/* RIIC ch3 (Port Expander, EEPROM (MAC Addr), Audio Codec) */
+	i2c3_pins: i2c3 {
+		pinmux = <RZA1_PINMUX(1, 6, 1)>,	/* RIIC3SCL */
+			 <RZA1_PINMUX(1, 7, 1)>;	/* RIIC3SDA */
+	};
+
+	keyboard_pins: keyboard {
+		pinmux = <RZA1_PINMUX(1, 9, 3)>,	/* IRQ3 */
+			 <RZA1_PINMUX(1, 8, 3)>,	/* IRQ2 */
+			 <RZA1_PINMUX(1, 11, 3)>;	/* IRQ5 */
+	};
+
+	/* Serial Console */
+	scif2_pins: serial2 {
+		pinmux = <RZA1_PINMUX(3, 0, 6)>,	/* TxD2 */
+			 <RZA1_PINMUX(3, 2, 4)>;	/* RxD2 */
+	};
+
+	/* Ethernet */
+	ether_pins: ether {
+		/* Ethernet on Ports 1,2,3,5 */
+		pinmux = <RZA1_PINMUX(1, 14, 4)>,	/* ET_COL   */
+			 <RZA1_PINMUX(5, 9, 2)>,	/* ET_MDC   */
+			 <RZA1_PINMUX(3, 3, 2)>,	/* ET_MDIO  */
+			 <RZA1_PINMUX(3, 4, 2)>,	/* ET_RXCLK */
+			 <RZA1_PINMUX(3, 5, 2)>,	/* ET_RXER  */
+			 <RZA1_PINMUX(3, 6, 2)>,	/* ET_RXDV  */
+			 <RZA1_PINMUX(2, 0, 2)>,	/* ET_TXCLK */
+			 <RZA1_PINMUX(2, 1, 2)>,	/* ET_TXER  */
+			 <RZA1_PINMUX(2, 2, 2)>,	/* ET_TXEN  */
+			 <RZA1_PINMUX(2, 3, 2)>,	/* ET_CRS   */
+			 <RZA1_PINMUX(2, 4, 2)>,	/* ET_TXD0  */
+			 <RZA1_PINMUX(2, 5, 2)>,	/* ET_TXD1  */
+			 <RZA1_PINMUX(2, 6, 2)>,	/* ET_TXD2  */
+			 <RZA1_PINMUX(2, 7, 2)>,	/* ET_TXD3  */
+			 <RZA1_PINMUX(2, 8, 2)>,	/* ET_RXD0  */
+			 <RZA1_PINMUX(2, 9, 2)>,	/* ET_RXD1  */
+			 <RZA1_PINMUX(2, 10, 2)>,	/* ET_RXD2  */
+			 <RZA1_PINMUX(2, 11, 2)>;	/* ET_RXD3  */
+	};
+
+	/* SDHI ch1 on CN1 */
+	sdhi1_pins: sdhi1 {
+		pinmux = <RZA1_PINMUX(3, 8, 7)>,	/* SD_CD_1 */
+			 <RZA1_PINMUX(3, 9, 7)>,	/* SD_WP_1 */
+			 <RZA1_PINMUX(3, 10, 7)>,	/* SD_D1_1 */
+			 <RZA1_PINMUX(3, 11, 7)>,	/* SD_D0_1 */
+			 <RZA1_PINMUX(3, 12, 7)>,	/* SD_CLK_1 */
+			 <RZA1_PINMUX(3, 13, 7)>,	/* SD_CMD_1 */
+			 <RZA1_PINMUX(3, 14, 7)>,	/* SD_D3_1 */
+			 <RZA1_PINMUX(3, 15, 7)>;	/* SD_D2_1 */
+	};
+};
+
+&mtu2 {
+	status = "okay";
+};
+
+&ether {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ether_pins>;
+	status = "okay";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-idb824.2814",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&sdhi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi1_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ostm0 {
+	status = "okay";
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scif2_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/renesas/r7s72100.dtsi b/arch/arm/boot/dts/renesas/r7s72100.dtsi
new file mode 100644
index 0000000000000..b07b71307f24a
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/r7s72100.dtsi
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r7s72100 SoC
+ *
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ */
+
+#include <dt-bindings/clock/r7s72100-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r7s72100";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+	};
+
+	/* Fixed factor clocks */
+	b_clk: b {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <400000000>;
+			clocks = <&cpg_clocks R7S72100_CLK_I>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	/* External clocks */
+	extal_clk: extal {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value must be set by board */
+		clock-frequency = <0>;
+	};
+
+	p0_clk: p0 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock"